From e162b39a368f0401e41b558f430c354d12a85b37 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Thu, 15 Jan 2009 11:08:40 -0800 Subject: softlockup: decouple hung tasks check from softlockup detection Decoupling allows: * hung tasks check to happen at very low priority * hung tasks check and softlockup to be enabled/disabled independently at compile and/or run-time * individual panic settings to be enabled disabled independently at compile and/or run-time * softlockup threshold to be reduced without increasing hung tasks poll frequency (hung task check is expensive relative to softlock watchdog) * hung task check to be zero over-head when disabled at run-time Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index 54cbabf..f2f94d5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -297,9 +297,6 @@ extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos); extern unsigned int softlockup_panic; -extern unsigned long sysctl_hung_task_check_count; -extern unsigned long sysctl_hung_task_timeout_secs; -extern unsigned long sysctl_hung_task_warnings; extern int softlockup_thresh; #else static inline void softlockup_tick(void) @@ -316,6 +313,15 @@ static inline void touch_all_softlockup_watchdogs(void) } #endif +#ifdef CONFIG_DETECT_HUNG_TASK +extern unsigned int sysctl_hung_task_panic; +extern unsigned long sysctl_hung_task_check_count; +extern unsigned long sysctl_hung_task_timeout_secs; +extern unsigned long sysctl_hung_task_warnings; +extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, + size_t *lenp, loff_t *ppos); +#endif /* Attach to any functions which should be ignored in wchan output. */ #define __sched __attribute__((__section__(".sched.text"))) @@ -1236,7 +1242,7 @@ struct task_struct { /* ipc stuff */ struct sysv_sem sysvsem; #endif -#ifdef CONFIG_DETECT_SOFTLOCKUP +#ifdef CONFIG_DETECT_HUNG_TASK /* hung task detection */ unsigned long last_switch_timestamp; unsigned long last_switch_count; diff --git a/kernel/Makefile b/kernel/Makefile index 2aebc4c..979745f 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -74,6 +74,7 @@ obj-$(CONFIG_AUDIT_TREE) += audit_tree.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o +obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o obj-$(CONFIG_GENERIC_HARDIRQS) += irq/ obj-$(CONFIG_SECCOMP) += seccomp.o obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o diff --git a/kernel/hung_task.c b/kernel/hung_task.c new file mode 100644 index 0000000..ba5a77c --- /dev/null +++ b/kernel/hung_task.c @@ -0,0 +1,198 @@ +/* + * Detect Hung Task + * + * kernel/hung_task.c - kernel thread for detecting tasks stuck in D state + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Have a reasonable limit on the number of tasks checked: + */ +unsigned long __read_mostly sysctl_hung_task_check_count = 1024; + +/* + * Zero means infinite timeout - no checking done: + */ +unsigned long __read_mostly sysctl_hung_task_timeout_secs = 120; +static unsigned long __read_mostly hung_task_poll_jiffies; + +unsigned long __read_mostly sysctl_hung_task_warnings = 10; + +static int __read_mostly did_panic; + +static struct task_struct *watchdog_task; + +/* + * Should we panic (and reboot, if panic_timeout= is set) when a + * hung task is detected: + */ +unsigned int __read_mostly sysctl_hung_task_panic = + CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE; + +static int __init hung_task_panic_setup(char *str) +{ + sysctl_hung_task_panic = simple_strtoul(str, NULL, 0); + + return 1; +} +__setup("hung_task_panic=", hung_task_panic_setup); + +static int +hung_task_panic(struct notifier_block *this, unsigned long event, void *ptr) +{ + did_panic = 1; + + return NOTIFY_DONE; +} + +static struct notifier_block panic_block = { + .notifier_call = hung_task_panic, +}; + +/* + * Returns seconds, approximately. We don't need nanosecond + * resolution, and we don't need to waste time with a big divide when + * 2^30ns == 1.074s. + */ +static unsigned long get_timestamp(void) +{ + int this_cpu = raw_smp_processor_id(); + + return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */ +} + +static void check_hung_task(struct task_struct *t, unsigned long now) +{ + unsigned long switch_count = t->nvcsw + t->nivcsw; + + if (t->flags & PF_FROZEN) + return; + + if (switch_count != t->last_switch_count || !t->last_switch_timestamp) { + t->last_switch_count = switch_count; + t->last_switch_timestamp = now; + return; + } + if ((long)(now - t->last_switch_timestamp) < + sysctl_hung_task_timeout_secs) + return; + if (!sysctl_hung_task_warnings) + return; + sysctl_hung_task_warnings--; + + /* + * Ok, the task did not get scheduled for more than 2 minutes, + * complain: + */ + printk(KERN_ERR "INFO: task %s:%d blocked for more than " + "%ld seconds.\n", t->comm, t->pid, + sysctl_hung_task_timeout_secs); + printk(KERN_ERR "\"echo 0 > /proc/sys/kernel/hung_task_timeout_secs\"" + " disables this message.\n"); + sched_show_task(t); + __debug_show_held_locks(t); + + t->last_switch_timestamp = now; + touch_nmi_watchdog(); + + if (sysctl_hung_task_panic) + panic("hung_task: blocked tasks"); +} + +/* + * Check whether a TASK_UNINTERRUPTIBLE does not get woken up for + * a really long time (120 seconds). If that happens, print out + * a warning. + */ +static void check_hung_uninterruptible_tasks(void) +{ + int max_count = sysctl_hung_task_check_count; + unsigned long now = get_timestamp(); + struct task_struct *g, *t; + + /* + * If the system crashed already then all bets are off, + * do not report extra hung tasks: + */ + if (test_taint(TAINT_DIE) || did_panic) + return; + + read_lock(&tasklist_lock); + do_each_thread(g, t) { + if (!--max_count) + goto unlock; + /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */ + if (t->state == TASK_UNINTERRUPTIBLE) + check_hung_task(t, now); + } while_each_thread(g, t); + unlock: + read_unlock(&tasklist_lock); +} + +static void update_poll_jiffies(void) +{ + /* timeout of 0 will disable the watchdog */ + if (sysctl_hung_task_timeout_secs == 0) + hung_task_poll_jiffies = MAX_SCHEDULE_TIMEOUT; + else + hung_task_poll_jiffies = sysctl_hung_task_timeout_secs * HZ / 2; +} + +/* + * Process updating of timeout sysctl + */ +int proc_dohung_task_timeout_secs(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, + size_t *lenp, loff_t *ppos) +{ + int ret; + + ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos); + + if (ret || !write) + goto out; + + update_poll_jiffies(); + + wake_up_process(watchdog_task); + + out: + return ret; +} + +/* + * kthread which checks for tasks stuck in D state + */ +static int watchdog(void *dummy) +{ + set_user_nice(current, 0); + update_poll_jiffies(); + + for ( ; ; ) { + while (schedule_timeout_interruptible(hung_task_poll_jiffies)); + check_hung_uninterruptible_tasks(); + } + + return 0; +} + +static int __init hung_task_init(void) +{ + atomic_notifier_chain_register(&panic_notifier_list, &panic_block); + watchdog_task = kthread_run(watchdog, NULL, "khungtaskd"); + + return 0; +} + +module_init(hung_task_init); diff --git a/kernel/softlockup.c b/kernel/softlockup.c index 85d5a24..88796c3 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -166,97 +166,11 @@ void softlockup_tick(void) } /* - * Have a reasonable limit on the number of tasks checked: - */ -unsigned long __read_mostly sysctl_hung_task_check_count = 1024; - -/* - * Zero means infinite timeout - no checking done: - */ -unsigned long __read_mostly sysctl_hung_task_timeout_secs = 480; - -unsigned long __read_mostly sysctl_hung_task_warnings = 10; - -/* - * Only do the hung-tasks check on one CPU: - */ -static int check_cpu __read_mostly = -1; - -static void check_hung_task(struct task_struct *t, unsigned long now) -{ - unsigned long switch_count = t->nvcsw + t->nivcsw; - - if (t->flags & PF_FROZEN) - return; - - if (switch_count != t->last_switch_count || !t->last_switch_timestamp) { - t->last_switch_count = switch_count; - t->last_switch_timestamp = now; - return; - } - if ((long)(now - t->last_switch_timestamp) < - sysctl_hung_task_timeout_secs) - return; - if (!sysctl_hung_task_warnings) - return; - sysctl_hung_task_warnings--; - - /* - * Ok, the task did not get scheduled for more than 2 minutes, - * complain: - */ - printk(KERN_ERR "INFO: task %s:%d blocked for more than " - "%ld seconds.\n", t->comm, t->pid, - sysctl_hung_task_timeout_secs); - printk(KERN_ERR "\"echo 0 > /proc/sys/kernel/hung_task_timeout_secs\"" - " disables this message.\n"); - sched_show_task(t); - __debug_show_held_locks(t); - - t->last_switch_timestamp = now; - touch_nmi_watchdog(); - - if (softlockup_panic) - panic("softlockup: blocked tasks"); -} - -/* - * Check whether a TASK_UNINTERRUPTIBLE does not get woken up for - * a really long time (120 seconds). If that happens, print out - * a warning. - */ -static void check_hung_uninterruptible_tasks(int this_cpu) -{ - int max_count = sysctl_hung_task_check_count; - unsigned long now = get_timestamp(this_cpu); - struct task_struct *g, *t; - - /* - * If the system crashed already then all bets are off, - * do not report extra hung tasks: - */ - if (test_taint(TAINT_DIE) || did_panic) - return; - - read_lock(&tasklist_lock); - do_each_thread(g, t) { - if (!--max_count) - goto unlock; - /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */ - if (t->state == TASK_UNINTERRUPTIBLE) - check_hung_task(t, now); - } while_each_thread(g, t); - unlock: - read_unlock(&tasklist_lock); -} - -/* * The watchdog thread - runs every second and touches the timestamp. */ static int watchdog(void *__bind_cpu) { struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 }; - int this_cpu = (long)__bind_cpu; sched_setscheduler(current, SCHED_FIFO, ¶m); @@ -276,11 +190,6 @@ static int watchdog(void *__bind_cpu) if (kthread_should_stop()) break; - if (this_cpu == check_cpu) { - if (sysctl_hung_task_timeout_secs) - check_hung_uninterruptible_tasks(this_cpu); - } - set_current_state(TASK_INTERRUPTIBLE); } __set_current_state(TASK_RUNNING); @@ -312,18 +221,9 @@ cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) break; case CPU_ONLINE: case CPU_ONLINE_FROZEN: - check_cpu = cpumask_any(cpu_online_mask); wake_up_process(per_cpu(watchdog_task, hotcpu)); break; #ifdef CONFIG_HOTPLUG_CPU - case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: - if (hotcpu == check_cpu) { - /* Pick any other online cpu. */ - check_cpu = cpumask_any_but(cpu_online_mask, hotcpu); - } - break; - case CPU_UP_CANCELED: case CPU_UP_CANCELED_FROZEN: if (!per_cpu(watchdog_task, hotcpu)) diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 596dc31..2481ed3 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -805,6 +805,19 @@ static struct ctl_table kern_table[] = { .extra1 = &neg_one, .extra2 = &sixty, }, +#endif +#ifdef CONFIG_DETECT_HUNG_TASK + { + .ctl_name = CTL_UNNUMBERED, + .procname = "hung_task_panic", + .data = &sysctl_hung_task_panic, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &zero, + .extra2 = &one, + }, { .ctl_name = CTL_UNNUMBERED, .procname = "hung_task_check_count", @@ -820,7 +833,7 @@ static struct ctl_table kern_table[] = { .data = &sysctl_hung_task_timeout_secs, .maxlen = sizeof(unsigned long), .mode = 0644, - .proc_handler = &proc_doulongvec_minmax, + .proc_handler = &proc_dohung_task_timeout_secs, .strategy = &sysctl_intvec, }, { diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 4c9ae60..883ecea 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -186,6 +186,44 @@ config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC default 1 if BOOTPARAM_SOFTLOCKUP_PANIC +config DETECT_HUNG_TASK + bool "Detect Hung Tasks" + depends on DEBUG_KERNEL + default y + help + Say Y here to enable the kernel to detect "hung tasks", + which are bugs that cause the task to be stuck in + uninterruptible "D" state indefinitiley. + + When a hung task is detected, the kernel will print the + current stack trace (which you should report), but the + task will stay in uninterruptible state. If lockdep is + enabled then all held locks will also be reported. This + feature has negligible overhead. + +config BOOTPARAM_HUNG_TASK_PANIC + bool "Panic (Reboot) On Hung Tasks" + depends on DETECT_HUNG_TASK + help + Say Y here to enable the kernel to panic on "hung tasks", + which are bugs that cause the kernel to leave a task stuck + in uninterruptible "D" state. + + The panic can be used in combination with panic_timeout, + to cause the system to reboot automatically after a + hung task has been detected. This feature is useful for + high-availability systems that have uptime guarantees and + where a hung tasks must be resolved ASAP. + + Say N if unsure. + +config BOOTPARAM_HUNG_TASK_PANIC_VALUE + int + depends on DETECT_HUNG_TASK + range 0 1 + default 0 if !BOOTPARAM_HUNG_TASK_PANIC + default 1 if BOOTPARAM_HUNG_TASK_PANIC + config SCHED_DEBUG bool "Collect scheduler debugging info" depends on DEBUG_KERNEL && PROC_FS -- cgit v0.10.2 From af432eb1cc3178ec7109aca2283aafb1c12ccac1 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Fri, 16 Jan 2009 09:09:38 -0800 Subject: softlockup: fix to allow compiling with !DETECT_HUNG_TASK Fixes the following compile error: kernel/fork.c:1049: error: 'struct task_struct' has no member named 'last_switch_count' kernel/fork.c:1050: error: 'struct task_struct' has no member named 'last_switch_timestamp' Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar diff --git a/kernel/fork.c b/kernel/fork.c index 1d68f12..fb94442 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1041,7 +1041,7 @@ static struct task_struct *copy_process(unsigned long clone_flags, p->default_timer_slack_ns = current->timer_slack_ns; -#ifdef CONFIG_DETECT_SOFTLOCKUP +#ifdef CONFIG_DETECT_HUNG_TASK p->last_switch_count = 0; p->last_switch_timestamp = 0; #endif -- cgit v0.10.2 From 603a148f434742fff08273207ffa44176cad13a1 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Sat, 17 Jan 2009 10:31:48 -0800 Subject: softlockup: fix potential race in hung_task when resetting timeout Impact: fix potential false panic A potential race exists if sysctl_hung_task_timeout_secs is reset to 0 while inside check_hung_uniterruptible_tasks(). If check_task() is entered, a comparison with 0 will result in a false hung_task being detected. If sysctl_hung_task_panic is set, the system will panic. Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar diff --git a/kernel/hung_task.c b/kernel/hung_task.c index ba5a77c..ba8ccd4 100644 --- a/kernel/hung_task.c +++ b/kernel/hung_task.c @@ -72,7 +72,8 @@ static unsigned long get_timestamp(void) return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */ } -static void check_hung_task(struct task_struct *t, unsigned long now) +static void check_hung_task(struct task_struct *t, unsigned long now, + unsigned long timeout) { unsigned long switch_count = t->nvcsw + t->nivcsw; @@ -84,8 +85,7 @@ static void check_hung_task(struct task_struct *t, unsigned long now) t->last_switch_timestamp = now; return; } - if ((long)(now - t->last_switch_timestamp) < - sysctl_hung_task_timeout_secs) + if ((long)(now - t->last_switch_timestamp) < timeout) return; if (!sysctl_hung_task_warnings) return; @@ -96,8 +96,7 @@ static void check_hung_task(struct task_struct *t, unsigned long now) * complain: */ printk(KERN_ERR "INFO: task %s:%d blocked for more than " - "%ld seconds.\n", t->comm, t->pid, - sysctl_hung_task_timeout_secs); + "%ld seconds.\n", t->comm, t->pid, timeout); printk(KERN_ERR "\"echo 0 > /proc/sys/kernel/hung_task_timeout_secs\"" " disables this message.\n"); sched_show_task(t); @@ -115,7 +114,7 @@ static void check_hung_task(struct task_struct *t, unsigned long now) * a really long time (120 seconds). If that happens, print out * a warning. */ -static void check_hung_uninterruptible_tasks(void) +static void check_hung_uninterruptible_tasks(unsigned long timeout) { int max_count = sysctl_hung_task_check_count; unsigned long now = get_timestamp(); @@ -134,7 +133,7 @@ static void check_hung_uninterruptible_tasks(void) goto unlock; /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */ if (t->state == TASK_UNINTERRUPTIBLE) - check_hung_task(t, now); + check_hung_task(t, now, timeout); } while_each_thread(g, t); unlock: read_unlock(&tasklist_lock); @@ -180,8 +179,17 @@ static int watchdog(void *dummy) update_poll_jiffies(); for ( ; ; ) { + unsigned long timeout; + while (schedule_timeout_interruptible(hung_task_poll_jiffies)); - check_hung_uninterruptible_tasks(); + + /* + * Need to cache timeout here to avoid timeout being set + * to 0 via sysctl while inside check_hung_*_tasks(). + */ + timeout = sysctl_hung_task_timeout_secs; + if (timeout) + check_hung_uninterruptible_tasks(timeout); } return 0; -- cgit v0.10.2 From 03dd5e1ba55d43c3a12b8514f9889049037f17f7 Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Thu, 29 Jan 2009 22:56:08 -0800 Subject: Input: add support for the Maple mouse on the SEGA Dreamcast Signed-off-by: Adrian McMenamin Acked-by: Mike Frysinger Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 093c8c1..e3855a7 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -292,4 +292,15 @@ config MOUSE_PXA930_TRKBALL help Say Y here to support PXA930 Trackball mouse. +config MOUSE_MAPLE + tristate "Maple mouse (for the Dreamcast)" + depends on MAPLE + help + This driver supports the Maple mouse on the SEGA Dreamcast. + + Most Dreamcast users, who have a mouse, will say Y here. + + To compile this driver as a module choose M here: the module will be + called maplemouse. + endif diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 8c8a1f2..4721894 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -6,18 +6,19 @@ obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o -obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o -obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o +obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o +obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o +obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o obj-$(CONFIG_MOUSE_INPORT) += inport.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o +obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o obj-$(CONFIG_MOUSE_PS2) += psmouse.o obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o +obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o -obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o -obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o psmouse-objs := psmouse-base.o synaptics.o diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c new file mode 100644 index 0000000..d196abf --- /dev/null +++ b/drivers/input/mouse/maplemouse.c @@ -0,0 +1,147 @@ +/* + * SEGA Dreamcast mouse driver + * Based on drivers/usb/usbmouse.c + * + * Copyright Yaegashi Takeshi, 2001 + * Adrian McMenamin, 2008 + */ + +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Adrian McMenamin "); +MODULE_DESCRIPTION("SEGA Dreamcast mouse driver"); +MODULE_LICENSE("GPL"); + +struct dc_mouse { + struct input_dev *dev; + struct maple_device *mdev; +}; + +static void dc_mouse_callback(struct mapleq *mq) +{ + int buttons, relx, rely, relz; + struct maple_device *mapledev = mq->dev; + struct dc_mouse *mse = maple_get_drvdata(mapledev); + struct input_dev *dev = mse->dev; + unsigned char *res = mq->recvbuf; + + buttons = ~res[8]; + relx = *(unsigned short *)(res + 12) - 512; + rely = *(unsigned short *)(res + 14) - 512; + relz = *(unsigned short *)(res + 16) - 512; + + input_report_key(dev, BTN_LEFT, buttons & 4); + input_report_key(dev, BTN_MIDDLE, buttons & 9); + input_report_key(dev, BTN_RIGHT, buttons & 2); + input_report_rel(dev, REL_X, relx); + input_report_rel(dev, REL_Y, rely); + input_report_rel(dev, REL_WHEEL, relz); + input_sync(dev); +} + +static int dc_mouse_open(struct input_dev *dev) +{ + struct dc_mouse *mse = dev->dev.platform_data; + + maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50, + MAPLE_FUNC_MOUSE); + + return 0; +} + +static void dc_mouse_close(struct input_dev *dev) +{ + struct dc_mouse *mse = dev->dev.platform_data; + + maple_getcond_callback(mse->mdev, dc_mouse_callback, 0, + MAPLE_FUNC_MOUSE); +} + + +static int __devinit probe_maple_mouse(struct device *dev) +{ + struct maple_device *mdev = to_maple_dev(dev); + struct maple_driver *mdrv = to_maple_driver(dev->driver); + struct input_dev *input_dev; + struct dc_mouse *mse; + int error; + + mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL); + input_dev = input_allocate_device(); + + if (!mse || !input_dev) { + error = -ENOMEM; + goto fail; + } + + mse->dev = input_dev; + mse->mdev = mdev; + + input_set_drvdata(input_dev, mse); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); + input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | + BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); + input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) | + BIT_MASK(REL_WHEEL); + input_dev->name = mdev->product_name; + input_dev->id.bustype = BUS_HOST; + input_dev->open = dc_mouse_open; + input_dev->close = dc_mouse_close; + + mdev->driver = mdrv; + maple_set_drvdata(mdev, mse); + + error = input_register_device(input_dev); + if (error) + goto fail; + + return 0; + +fail: + input_free_device(input_dev); + maple_set_drvdata(mdev, NULL); + kfree(mse); + mdev->driver = NULL; + return error; +} + +static int __devexit remove_maple_mouse(struct device *dev) +{ + struct maple_device *mdev = to_maple_dev(dev); + struct dc_mouse *mse = maple_get_drvdata(mdev); + + mdev->callback = NULL; + input_unregister_device(mse->dev); + maple_set_drvdata(mdev, NULL); + kfree(mse); + + return 0; +} + +static struct maple_driver dc_mouse_driver = { + .function = MAPLE_FUNC_MOUSE, + .drv = { + .name = "Dreamcast_mouse", + .probe = probe_maple_mouse, + .remove = __devexit_p(remove_maple_mouse), + }, +}; + +static int __init dc_mouse_init(void) +{ + return maple_driver_register(&dc_mouse_driver); +} + +static void __exit dc_mouse_exit(void) +{ + maple_driver_unregister(&dc_mouse_driver); +} + +module_init(dc_mouse_init); +module_exit(dc_mouse_exit); -- cgit v0.10.2 From b0ee0d3eb31a163c958f2960906c44bcdfdc607b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 29 Jan 2009 22:56:08 -0800 Subject: Input: pc110pad - use no_pci_devices() Use no_pci_devices() helper instead of doing explicit get/put. Signed-off-by: Roel Kluin Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c index fd09c8d..f63995f 100644 --- a/drivers/input/mouse/pc110pad.c +++ b/drivers/input/mouse/pc110pad.c @@ -111,11 +111,8 @@ static int __init pc110pad_init(void) struct pci_dev *dev; int err; - dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - pci_dev_put(dev); + if (!no_pci_devices()) return -ENODEV; - } if (!request_region(pc110pad_io, 4, "pc110pad")) { printk(KERN_ERR "pc110pad: I/O area %#x-%#x in use.\n", -- cgit v0.10.2 From e7b5c1ef4d87426da0b689a0a4fa67edda02ea5c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Jan 2009 23:17:52 -0800 Subject: Input: stop autorepeat timer on key release Whenever you press and then release a key, the CPU wakes up three times: * press * release * autorepeat timer exactly 250ms after press The autorepeat timer has nothing to do, obviously, since you already have released the key, so stop it on key release. [dtor@mail.ru: This changes autorepeat behavior a bit since we now stop autorepeat even if key that is being released is not the one that is being auto-repeated, but I believe the new behavior is better.] Signed-off-by: Johannes Berg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input.c b/drivers/input/input.c index 1730d73..46e9ce1 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -132,6 +132,11 @@ static void input_start_autorepeat(struct input_dev *dev, int code) } } +static void input_stop_autorepeat(struct input_dev *dev) +{ + del_timer(&dev->timer); +} + #define INPUT_IGNORE_EVENT 0 #define INPUT_PASS_TO_HANDLERS 1 #define INPUT_PASS_TO_DEVICE 2 @@ -167,6 +172,8 @@ static void input_handle_event(struct input_dev *dev, __change_bit(code, dev->key); if (value) input_start_autorepeat(dev, code); + else + input_stop_autorepeat(dev); } disposition = INPUT_PASS_TO_HANDLERS; -- cgit v0.10.2 From 169bc1efa84680d0a8c9567539f8577fd52e1a77 Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Thu, 29 Jan 2009 23:42:16 -0800 Subject: Input: ati_remote2 - complete suspend support Add the missing reset_resume, pre_reset and post_reset hooks. Signed-off-by: Ville Syrjala Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c index 3c9988d..351eb90 100644 --- a/drivers/input/misc/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -139,6 +139,9 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d static void ati_remote2_disconnect(struct usb_interface *interface); static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message); static int ati_remote2_resume(struct usb_interface *interface); +static int ati_remote2_reset_resume(struct usb_interface *interface); +static int ati_remote2_pre_reset(struct usb_interface *interface); +static int ati_remote2_post_reset(struct usb_interface *interface); static struct usb_driver ati_remote2_driver = { .name = "ati_remote2", @@ -147,6 +150,9 @@ static struct usb_driver ati_remote2_driver = { .id_table = ati_remote2_id_table, .suspend = ati_remote2_suspend, .resume = ati_remote2_resume, + .reset_resume = ati_remote2_reset_resume, + .pre_reset = ati_remote2_pre_reset, + .post_reset = ati_remote2_post_reset, .supports_autosuspend = 1, }; @@ -715,6 +721,78 @@ static int ati_remote2_resume(struct usb_interface *interface) return r; } +static int ati_remote2_reset_resume(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + int r = 0; + + if (alt->desc.bInterfaceNumber) + return 0; + + ar2 = usb_get_intfdata(interface); + + dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); + + mutex_lock(&ati_remote2_mutex); + + r = ati_remote2_setup(ar2); + if (r) + goto out; + + if (ar2->flags & ATI_REMOTE2_OPENED) + r = ati_remote2_submit_urbs(ar2); + + if (!r) + ar2->flags &= ~ATI_REMOTE2_SUSPENDED; + + out: + mutex_unlock(&ati_remote2_mutex); + + return r; +} + +static int ati_remote2_pre_reset(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + + if (alt->desc.bInterfaceNumber) + return 0; + + ar2 = usb_get_intfdata(interface); + + dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); + + mutex_lock(&ati_remote2_mutex); + + if (ar2->flags == ATI_REMOTE2_OPENED) + ati_remote2_kill_urbs(ar2); + + return 0; +} + +static int ati_remote2_post_reset(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + int r = 0; + + if (alt->desc.bInterfaceNumber) + return 0; + + ar2 = usb_get_intfdata(interface); + + dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); + + if (ar2->flags == ATI_REMOTE2_OPENED) + r = ati_remote2_submit_urbs(ar2); + + mutex_unlock(&ati_remote2_mutex); + + return r; +} + static int __init ati_remote2_init(void) { int r; -- cgit v0.10.2 From d329e33c7c2bdcd955a00c84a9363cb309cad352 Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Thu, 29 Jan 2009 23:42:16 -0800 Subject: Input: ati_remote2 - add per device attrs Add per device channel_mask and mode_mask attributes. They inherit the values from the module parameters when the device is registered. One additional benefit is that now runtime changes to channel_mask can actually affect the hardware channel setup like they should. Signed-off-by: Ville Syrjala Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c index 351eb90..0871d7b 100644 --- a/drivers/input/misc/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -31,11 +31,16 @@ MODULE_LICENSE("GPL"); * newly configured "channel". */ -static unsigned int channel_mask = 0xFFFF; +enum { + ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF, + ATI_REMOTE2_MAX_MODE_MASK = 0x1F, +}; + +static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK; module_param(channel_mask, uint, 0644); MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>"); -static unsigned int mode_mask = 0x1F; +static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK; module_param(mode_mask, uint, 0644); MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); @@ -133,6 +138,9 @@ struct ati_remote2 { u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)]; unsigned int flags; + + unsigned int channel_mask; + unsigned int mode_mask; }; static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); @@ -244,7 +252,7 @@ static void ati_remote2_input_mouse(struct ati_remote2 *ar2) channel = data[0] >> 4; - if (!((1 << channel) & channel_mask)) + if (!((1 << channel) & ar2->channel_mask)) return; mode = data[0] & 0x0F; @@ -256,7 +264,7 @@ static void ati_remote2_input_mouse(struct ati_remote2 *ar2) return; } - if (!((1 << mode) & mode_mask)) + if (!((1 << mode) & ar2->mode_mask)) return; input_event(idev, EV_REL, REL_X, (s8) data[1]); @@ -283,7 +291,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) channel = data[0] >> 4; - if (!((1 << channel) & channel_mask)) + if (!((1 << channel) & ar2->channel_mask)) return; mode = data[0] & 0x0F; @@ -311,7 +319,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) ar2->mode = mode; } - if (!((1 << mode) & mode_mask)) + if (!((1 << mode) & ar2->mode_mask)) return; index = ati_remote2_lookup(hw_code); @@ -416,7 +424,7 @@ static int ati_remote2_getkeycode(struct input_dev *idev, int index, mode; mode = scancode >> 8; - if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask)) + if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask)) return -EINVAL; index = ati_remote2_lookup(scancode & 0xFF); @@ -433,7 +441,7 @@ static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keyc int index, mode, old_keycode; mode = scancode >> 8; - if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask)) + if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask)) return -EINVAL; index = ati_remote2_lookup(scancode & 0xFF); @@ -556,7 +564,7 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) } } -static int ati_remote2_setup(struct ati_remote2 *ar2) +static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask) { int r, i, channel; @@ -571,8 +579,8 @@ static int ati_remote2_setup(struct ati_remote2 *ar2) channel = 0; for (i = 0; i < 16; i++) { - if ((1 << i) & channel_mask) { - if (!(~(1 << i) & 0xFFFF & channel_mask)) + if ((1 << i) & ch_mask) { + if (!(~(1 << i) & ch_mask)) channel = i + 1; break; } @@ -591,6 +599,99 @@ static int ati_remote2_setup(struct ati_remote2 *ar2) return 0; } +static ssize_t ati_remote2_show_channel_mask(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + struct usb_interface *intf = usb_ifnum_to_if(udev, 0); + struct ati_remote2 *ar2 = usb_get_intfdata(intf); + + return sprintf(buf, "0x%04x\n", ar2->channel_mask); +} + +static ssize_t ati_remote2_store_channel_mask(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + struct usb_interface *intf = usb_ifnum_to_if(udev, 0); + struct ati_remote2 *ar2 = usb_get_intfdata(intf); + unsigned long mask; + int r; + + if (strict_strtoul(buf, 0, &mask)) + return -EINVAL; + + if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK) + return -EINVAL; + + r = usb_autopm_get_interface(ar2->intf[0]); + if (r) { + dev_err(&ar2->intf[0]->dev, + "%s(): usb_autopm_get_interface() = %d\n", __func__, r); + return r; + } + + mutex_lock(&ati_remote2_mutex); + + if (mask != ar2->channel_mask && !ati_remote2_setup(ar2, mask)) + ar2->channel_mask = mask; + + mutex_unlock(&ati_remote2_mutex); + + usb_autopm_put_interface(ar2->intf[0]); + + return count; +} + +static ssize_t ati_remote2_show_mode_mask(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + struct usb_interface *intf = usb_ifnum_to_if(udev, 0); + struct ati_remote2 *ar2 = usb_get_intfdata(intf); + + return sprintf(buf, "0x%02x\n", ar2->mode_mask); +} + +static ssize_t ati_remote2_store_mode_mask(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + struct usb_interface *intf = usb_ifnum_to_if(udev, 0); + struct ati_remote2 *ar2 = usb_get_intfdata(intf); + unsigned long mask; + + if (strict_strtoul(buf, 0, &mask)) + return -EINVAL; + + if (mask & ~ATI_REMOTE2_MAX_MODE_MASK) + return -EINVAL; + + ar2->mode_mask = mask; + + return count; +} + +static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask, + ati_remote2_store_channel_mask); + +static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask, + ati_remote2_store_mode_mask); + +static struct attribute *ati_remote2_attrs[] = { + &dev_attr_channel_mask.attr, + &dev_attr_mode_mask.attr, + NULL, +}; + +static struct attribute_group ati_remote2_attr_group = { + .attrs = ati_remote2_attrs, +}; + static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); @@ -621,7 +722,10 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d if (r) goto fail2; - r = ati_remote2_setup(ar2); + ar2->channel_mask = channel_mask & ATI_REMOTE2_MAX_CHANNEL_MASK; + ar2->mode_mask = mode_mask & ATI_REMOTE2_MAX_MODE_MASK; + + r = ati_remote2_setup(ar2, ar2->channel_mask); if (r) goto fail2; @@ -630,19 +734,24 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name)); - r = ati_remote2_input_init(ar2); + r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group); if (r) goto fail2; + r = ati_remote2_input_init(ar2); + if (r) + goto fail3; + usb_set_intfdata(interface, ar2); interface->needs_remote_wakeup = 1; return 0; + fail3: + sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group); fail2: ati_remote2_urb_cleanup(ar2); - usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); fail1: kfree(ar2); @@ -663,6 +772,8 @@ static void ati_remote2_disconnect(struct usb_interface *interface) input_unregister_device(ar2->idev); + sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group); + ati_remote2_urb_cleanup(ar2); usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); @@ -736,7 +847,7 @@ static int ati_remote2_reset_resume(struct usb_interface *interface) mutex_lock(&ati_remote2_mutex); - r = ati_remote2_setup(ar2); + r = ati_remote2_setup(ar2, ar2->channel_mask); if (r) goto out; -- cgit v0.10.2 From 8a49cfa9de4ef47eb9238d625b900d4cdddccf30 Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Thu, 29 Jan 2009 23:42:16 -0800 Subject: Input: ati_remote2 - check module params Validate that the values of the module parameters are within the supported range. Also print the values in hex since that seems like a better match for bitmasks than decimal. Signed-off-by: Ville Syrjala Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c index 0871d7b..922c051 100644 --- a/drivers/input/misc/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -36,12 +36,68 @@ enum { ATI_REMOTE2_MAX_MODE_MASK = 0x1F, }; +static int ati_remote2_set_mask(const char *val, + struct kernel_param *kp, unsigned int max) +{ + unsigned long mask; + int ret; + + if (!val) + return -EINVAL; + + ret = strict_strtoul(val, 0, &mask); + if (ret) + return ret; + + if (mask & ~max) + return -EINVAL; + + *(unsigned int *)kp->arg = mask; + + return 0; +} + +static int ati_remote2_set_channel_mask(const char *val, + struct kernel_param *kp) +{ + pr_debug("%s()\n", __func__); + + return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK); +} + +static int ati_remote2_get_channel_mask(char *buffer, struct kernel_param *kp) +{ + pr_debug("%s()\n", __func__); + + return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg); +} + +static int ati_remote2_set_mode_mask(const char *val, struct kernel_param *kp) +{ + pr_debug("%s()\n", __func__); + + return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK); +} + +static int ati_remote2_get_mode_mask(char *buffer, struct kernel_param *kp) +{ + pr_debug("%s()\n", __func__); + + return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg); +} + static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK; -module_param(channel_mask, uint, 0644); +#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int) +#define param_set_channel_mask ati_remote2_set_channel_mask +#define param_get_channel_mask ati_remote2_get_channel_mask +module_param(channel_mask, channel_mask, 0644); MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>"); static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK; -module_param(mode_mask, uint, 0644); +#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int) +#define param_set_mode_mask ati_remote2_set_mode_mask +#define param_get_mode_mask ati_remote2_get_mode_mask +module_param(mode_mask, mode_mask, 0644); MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); static struct usb_device_id ati_remote2_id_table[] = { @@ -722,8 +778,8 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d if (r) goto fail2; - ar2->channel_mask = channel_mask & ATI_REMOTE2_MAX_CHANNEL_MASK; - ar2->mode_mask = mode_mask & ATI_REMOTE2_MAX_MODE_MASK; + ar2->channel_mask = channel_mask; + ar2->mode_mask = mode_mask; r = ati_remote2_setup(ar2, ar2->channel_mask); if (r) -- cgit v0.10.2 From 5e54f5986a579b8445aa1d5ad3435c2cf7568bed Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Fri, 30 Jan 2009 15:29:54 -0800 Subject: softlockup: remove unused definition for spawn_softlockup_task The definition of spawn_softlockup_task in sched.h became unnecessary once it was converted to the early_initcall() interface. Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index f2f94d5..2a2811c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -302,9 +302,6 @@ extern int softlockup_thresh; static inline void softlockup_tick(void) { } -static inline void spawn_softlockup_task(void) -{ -} static inline void touch_softlockup_watchdog(void) { } -- cgit v0.10.2 From 9705ecc5c1f8f34f756164a711b4cc61110c0283 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:23:12 +0530 Subject: pcf50633_charger: Enable periodic charging restart The battery charger state machine switches into charging mode when the battery voltage falls below 96% of a battery float voltage. But the voltage drop in Li-ion batteries is marginal(1~2 %) till about 80% of its capacity - which means, after a BATFULL, charging won't be restarted until 80%. This work_struct function restarts charging at regular intervals to make sure the battery doesn't discharge too much. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index 41aec2a..1fe1e85 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -36,6 +36,8 @@ struct pcf50633_mbc { struct power_supply usb; struct power_supply adapter; + + struct delayed_work charging_restart_work; }; int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) @@ -43,6 +45,8 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev); int ret = 0; u8 bits; + int charging_start = 1; + u8 mbcs2, chgmod; if (ma >= 1000) bits = PCF50633_MBCC7_USB_1000mA; @@ -50,8 +54,10 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) bits = PCF50633_MBCC7_USB_500mA; else if (ma >= 100) bits = PCF50633_MBCC7_USB_100mA; - else + else { bits = PCF50633_MBCC7_USB_SUSPEND; + charging_start = 0; + } ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7, PCF50633_MBCC7_USB_MASK, bits); @@ -60,6 +66,22 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) else dev_info(pcf->dev, "usb curlim to %d mA\n", ma); + /* Manual charging start */ + mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); + chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK); + + /* If chgmod == BATFULL, setting chgena has no effect. + * We need to set resume instead. + */ + if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL) + pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, + PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA); + else + pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, + PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME); + + mbc->usb_active = charging_start; + power_supply_changed(&mbc->usb); return ret; @@ -160,10 +182,44 @@ static struct attribute_group mbc_attr_group = { .attrs = pcf50633_mbc_sysfs_entries, }; +/* MBC state machine switches into charging mode when the battery voltage + * falls below 96% of a battery float voltage. But the voltage drop in Li-ion + * batteries is marginal(1~2 %) till about 80% of its capacity - which means, + * after a BATFULL, charging won't be restarted until 80%. + * + * This work_struct function restarts charging at regular intervals to make + * sure we don't discharge too much + */ + +static void pcf50633_mbc_charging_restart(struct work_struct *work) +{ + struct pcf50633_mbc *mbc; + u8 mbcs2, chgmod; + + mbc = container_of(work, struct pcf50633_mbc, + charging_restart_work.work); + + mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2); + chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK); + + if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL) + return; + + /* Restart charging */ + pcf50633_reg_set_bit_mask(mbc->pcf, PCF50633_REG_MBCC1, + PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME); + mbc->usb_active = 1; + power_supply_changed(&mbc->usb); + + dev_info(mbc->pcf->dev, "Charging restarted\n"); +} + static void pcf50633_mbc_irq_handler(int irq, void *data) { struct pcf50633_mbc *mbc = data; + int chg_restart_interval = + mbc->pcf->pdata->charging_restart_interval; /* USB */ if (irq == PCF50633_IRQ_USBINS) { @@ -172,6 +228,7 @@ pcf50633_mbc_irq_handler(int irq, void *data) mbc->usb_online = 0; mbc->usb_active = 0; pcf50633_mbc_usb_curlim_set(mbc->pcf, 0); + cancel_delayed_work_sync(&mbc->charging_restart_work); } /* Adapter */ @@ -186,7 +243,14 @@ pcf50633_mbc_irq_handler(int irq, void *data) if (irq == PCF50633_IRQ_BATFULL) { mbc->usb_active = 0; mbc->adapter_active = 0; - } + + if (chg_restart_interval > 0) + schedule_delayed_work(&mbc->charging_restart_work, + chg_restart_interval); + } else if (irq == PCF50633_IRQ_USBLIMON) + mbc->usb_active = 0; + else if (irq == PCF50633_IRQ_USBLIMOFF) + mbc->usb_active = 1; power_supply_changed(&mbc->usb); power_supply_changed(&mbc->adapter); @@ -303,6 +367,9 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev) return ret; } + INIT_DELAYED_WORK(&mbc->charging_restart_work, + pcf50633_mbc_charging_restart); + ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group); if (ret) dev_err(mbc->pcf->dev, "failed to create sysfs entries\n"); @@ -328,6 +395,8 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev) power_supply_unregister(&mbc->usb); power_supply_unregister(&mbc->adapter); + cancel_delayed_work_sync(&mbc->charging_restart_work); + kfree(mbc); return 0; diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 4455b21..c8f51c3 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -29,6 +29,8 @@ struct pcf50633_platform_data { char **batteries; int num_batteries; + int charging_restart_interval; + /* Callbacks */ void (*probe_done)(struct pcf50633 *); void (*mbc_event_callback)(struct pcf50633 *, int); -- cgit v0.10.2 From cc52a29e6245acd9032fcfa0ffcab4cc612de986 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:22:55 +0530 Subject: pcf50633_charger: Remove unused mbc_set_status function The 'pcf50633_mbc_set_status' function is unused, so remove it. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index 1fe1e85..e8b278f 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -106,21 +106,6 @@ int pcf50633_mbc_get_status(struct pcf50633 *pcf) } EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status); -void pcf50633_mbc_set_status(struct pcf50633 *pcf, int what, int status) -{ - struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev); - - if (what & PCF50633_MBC_USB_ONLINE) - mbc->usb_online = !!status; - if (what & PCF50633_MBC_USB_ACTIVE) - mbc->usb_active = !!status; - if (what & PCF50633_MBC_ADAPTER_ONLINE) - mbc->adapter_online = !!status; - if (what & PCF50633_MBC_ADAPTER_ACTIVE) - mbc->adapter_active = !!status; -} -EXPORT_SYMBOL_GPL(pcf50633_mbc_set_status); - static ssize_t show_chgmode(struct device *dev, struct device_attribute *attr, char *buf) { diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h index 6e17619..4119579 100644 --- a/include/linux/mfd/pcf50633/mbc.h +++ b/include/linux/mfd/pcf50633/mbc.h @@ -128,7 +128,6 @@ enum pcf50633_reg_mbcs3 { int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma); int pcf50633_mbc_get_status(struct pcf50633 *); -void pcf50633_mbc_set_status(struct pcf50633 *, int what, int status); #endif -- cgit v0.10.2 From 5bf2b994bfe11bfe86231050897b2d881ca544d9 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 18 Jan 2009 17:40:27 +0100 Subject: pda_power: Add optional OTG transceiver and voltage regulator support This patch allows machines to use an OTG transceiver driver instead of supplying a custom is_usb_online callback to check USB power. Also, in the case that the OTG transceiver handles charger control when connected to USB, a regulator named "ac_draw" can be supplied instead of the custom set_charge callback to control the charger when connected to AC. The check for (transceiver->state == OTG_STATE_B_PERIPHERAL) in otg_is_usb_online is probably too simple, I'm just using this with a peripheral only device and gpio_vbus + bq24022. I'm not sure which other OTG states can supply power. Signed-off-by: Philipp Zabel Signed-off-by: Anton Vorontsov diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c index b56a704..a232de6 100644 --- a/drivers/power/pda_power.c +++ b/drivers/power/pda_power.c @@ -12,11 +12,14 @@ #include #include +#include #include #include #include +#include #include #include +#include static inline unsigned int get_irq_flags(struct resource *res) { @@ -35,6 +38,11 @@ static struct timer_list supply_timer; static struct timer_list polling_timer; static int polling; +#ifdef CONFIG_USB_OTG_UTILS +static struct otg_transceiver *transceiver; +#endif +static struct regulator *ac_draw; + enum { PDA_PSY_OFFLINE = 0, PDA_PSY_ONLINE = 1, @@ -104,18 +112,35 @@ static void update_status(void) static void update_charger(void) { - if (!pdata->set_charge) - return; - - if (new_ac_status > 0) { - dev_dbg(dev, "charger on (AC)\n"); - pdata->set_charge(PDA_POWER_CHARGE_AC); - } else if (new_usb_status > 0) { - dev_dbg(dev, "charger on (USB)\n"); - pdata->set_charge(PDA_POWER_CHARGE_USB); - } else { - dev_dbg(dev, "charger off\n"); - pdata->set_charge(0); + static int regulator_enabled; + int max_uA = pdata->ac_max_uA; + + if (pdata->set_charge) { + if (new_ac_status > 0) { + dev_dbg(dev, "charger on (AC)\n"); + pdata->set_charge(PDA_POWER_CHARGE_AC); + } else if (new_usb_status > 0) { + dev_dbg(dev, "charger on (USB)\n"); + pdata->set_charge(PDA_POWER_CHARGE_USB); + } else { + dev_dbg(dev, "charger off\n"); + pdata->set_charge(0); + } + } else if (ac_draw) { + if (new_ac_status > 0) { + regulator_set_current_limit(ac_draw, max_uA, max_uA); + if (!regulator_enabled) { + dev_dbg(dev, "charger on (AC)\n"); + regulator_enable(ac_draw); + regulator_enabled = 1; + } + } else { + if (regulator_enabled) { + dev_dbg(dev, "charger off\n"); + regulator_disable(ac_draw); + regulator_enabled = 0; + } + } } } @@ -194,6 +219,13 @@ static void polling_timer_func(unsigned long unused) jiffies + msecs_to_jiffies(pdata->polling_interval)); } +#ifdef CONFIG_USB_OTG_UTILS +static int otg_is_usb_online(void) +{ + return (transceiver->state == OTG_STATE_B_PERIPHERAL); +} +#endif + static int pda_power_probe(struct platform_device *pdev) { int ret = 0; @@ -227,6 +259,9 @@ static int pda_power_probe(struct platform_device *pdev) if (!pdata->polling_interval) pdata->polling_interval = 2000; + if (!pdata->ac_max_uA) + pdata->ac_max_uA = 500000; + setup_timer(&charger_timer, charger_timer_func, 0); setup_timer(&supply_timer, supply_timer_func, 0); @@ -240,6 +275,13 @@ static int pda_power_probe(struct platform_device *pdev) pda_psy_usb.num_supplicants = pdata->num_supplicants; } + ac_draw = regulator_get(dev, "ac_draw"); + if (IS_ERR(ac_draw)) { + dev_dbg(dev, "couldn't get ac_draw regulator\n"); + ac_draw = NULL; + ret = PTR_ERR(ac_draw); + } + if (pdata->is_ac_online) { ret = power_supply_register(&pdev->dev, &pda_psy_ac); if (ret) { @@ -261,6 +303,13 @@ static int pda_power_probe(struct platform_device *pdev) } } +#ifdef CONFIG_USB_OTG_UTILS + transceiver = otg_get_transceiver(); + if (transceiver && !pdata->is_usb_online) { + pdata->is_usb_online = otg_is_usb_online; + } +#endif + if (pdata->is_usb_online) { ret = power_supply_register(&pdev->dev, &pda_psy_usb); if (ret) { @@ -300,10 +349,18 @@ usb_irq_failed: usb_supply_failed: if (pdata->is_ac_online && ac_irq) free_irq(ac_irq->start, &pda_psy_ac); +#ifdef CONFIG_USB_OTG_UTILS + if (transceiver) + otg_put_transceiver(transceiver); +#endif ac_irq_failed: if (pdata->is_ac_online) power_supply_unregister(&pda_psy_ac); ac_supply_failed: + if (ac_draw) { + regulator_put(ac_draw); + ac_draw = NULL; + } if (pdata->exit) pdata->exit(dev); init_failed: @@ -327,6 +384,14 @@ static int pda_power_remove(struct platform_device *pdev) power_supply_unregister(&pda_psy_usb); if (pdata->is_ac_online) power_supply_unregister(&pda_psy_ac); +#ifdef CONFIG_USB_OTG_UTILS + if (transceiver) + otg_put_transceiver(transceiver); +#endif + if (ac_draw) { + regulator_put(ac_draw); + ac_draw = NULL; + } if (pdata->exit) pdata->exit(dev); diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h index cb7d10f..d4cf7a2 100644 --- a/include/linux/pda_power.h +++ b/include/linux/pda_power.h @@ -31,6 +31,8 @@ struct pda_power_pdata { unsigned int wait_for_status; /* msecs, default is 500 */ unsigned int wait_for_charger; /* msecs, default is 500 */ unsigned int polling_interval; /* msecs, default is 2000 */ + + unsigned long ac_max_uA; /* current to draw when on AC */ }; #endif /* __PDA_POWER_H__ */ -- cgit v0.10.2 From ce9dbe244bf2063c41792e40dae7745957b118e0 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Wed, 4 Feb 2009 20:35:48 -0800 Subject: softlockup: check all tasks in hung_task MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Impact: extend the scope of hung-task checks Changed the default value of hung_task_check_count to PID_MAX_LIMIT. hung_task_batch_count added to put an upper bound on the critical section. Every hung_task_batch_count checks, the rcu lock is never held for a too long time. Keeping the critical section small minimizes time preemption is disabled and keeps rcu grace periods small. To prevent following a stale pointer, get_task_struct is called on g and t. To verify that g and t have not been unhashed while outside the critical section, the task states are checked. The design was proposed by Frédéric Weisbecker. Signed-off-by: Mandeep Singh Baines Suggested-by: Frédéric Weisbecker Acked-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/kernel/hung_task.c b/kernel/hung_task.c index ba8ccd4..481ca8b 100644 --- a/kernel/hung_task.c +++ b/kernel/hung_task.c @@ -17,9 +17,18 @@ #include /* - * Have a reasonable limit on the number of tasks checked: + * The number of tasks checked: */ -unsigned long __read_mostly sysctl_hung_task_check_count = 1024; +unsigned long __read_mostly sysctl_hung_task_check_count = PID_MAX_LIMIT; + +/* + * Limit number of tasks checked in a batch. + * + * This value controls the preemptibility of khungtaskd since preemption + * is disabled during the critical section. It also controls the size of + * the RCU grace period. So it needs to be upper-bound. + */ +#define HUNG_TASK_BATCHING 1024 /* * Zero means infinite timeout - no checking done: @@ -110,6 +119,24 @@ static void check_hung_task(struct task_struct *t, unsigned long now, } /* + * To avoid extending the RCU grace period for an unbounded amount of time, + * periodically exit the critical section and enter a new one. + * + * For preemptible RCU it is sufficient to call rcu_read_unlock in order + * exit the grace period. For classic RCU, a reschedule is required. + */ +static void rcu_lock_break(struct task_struct *g, struct task_struct *t) +{ + get_task_struct(g); + get_task_struct(t); + rcu_read_unlock(); + cond_resched(); + rcu_read_lock(); + put_task_struct(t); + put_task_struct(g); +} + +/* * Check whether a TASK_UNINTERRUPTIBLE does not get woken up for * a really long time (120 seconds). If that happens, print out * a warning. @@ -117,6 +144,7 @@ static void check_hung_task(struct task_struct *t, unsigned long now, static void check_hung_uninterruptible_tasks(unsigned long timeout) { int max_count = sysctl_hung_task_check_count; + int batch_count = HUNG_TASK_BATCHING; unsigned long now = get_timestamp(); struct task_struct *g, *t; @@ -131,6 +159,13 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout) do_each_thread(g, t) { if (!--max_count) goto unlock; + if (!--batch_count) { + batch_count = HUNG_TASK_BATCHING; + rcu_lock_break(g, t); + /* Exit if t or g was unhashed during refresh. */ + if (t->state == TASK_DEAD || g->state == TASK_DEAD) + goto unlock; + } /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */ if (t->state == TASK_UNINTERRUPTIBLE) check_hung_task(t, now, timeout); -- cgit v0.10.2 From 94be52dc075a32af4aa73d7e10f68734d62d6af2 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Thu, 5 Feb 2009 09:56:08 -0800 Subject: softlockup: convert read_lock in hung_task to rcu_read_lock Since the tasklist is protected by rcu list operations, it is safe to convert the read_lock()s to rcu_read_lock(). Suggested-by: Peter Zijlstra Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar diff --git a/kernel/hung_task.c b/kernel/hung_task.c index 481ca8b..3951a80 100644 --- a/kernel/hung_task.c +++ b/kernel/hung_task.c @@ -155,7 +155,7 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout) if (test_taint(TAINT_DIE) || did_panic) return; - read_lock(&tasklist_lock); + rcu_read_lock(); do_each_thread(g, t) { if (!--max_count) goto unlock; @@ -171,7 +171,7 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout) check_hung_task(t, now, timeout); } while_each_thread(g, t); unlock: - read_unlock(&tasklist_lock); + rcu_read_unlock(); } static void update_poll_jiffies(void) -- cgit v0.10.2 From 17406b82d621930cca8ccc1272cdac9a7dae8e40 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Fri, 6 Feb 2009 15:37:47 -0800 Subject: softlockup: remove timestamp checking from hung_task Impact: saves sizeof(long) bytes per task_struct By guaranteeing that sysctl_hung_task_timeout_secs have elapsed between tasklist scans we can avoid using timestamps. Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index 2a2811c..e0d723f 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1241,7 +1241,6 @@ struct task_struct { #endif #ifdef CONFIG_DETECT_HUNG_TASK /* hung task detection */ - unsigned long last_switch_timestamp; unsigned long last_switch_count; #endif /* CPU-specific state of this task */ diff --git a/kernel/fork.c b/kernel/fork.c index fb94442..bf582f7 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -639,6 +639,9 @@ static int copy_mm(unsigned long clone_flags, struct task_struct * tsk) tsk->min_flt = tsk->maj_flt = 0; tsk->nvcsw = tsk->nivcsw = 0; +#ifdef CONFIG_DETECT_HUNG_TASK + tsk->last_switch_count = tsk->nvcsw + tsk->nivcsw; +#endif tsk->mm = NULL; tsk->active_mm = NULL; @@ -1041,11 +1044,6 @@ static struct task_struct *copy_process(unsigned long clone_flags, p->default_timer_slack_ns = current->timer_slack_ns; -#ifdef CONFIG_DETECT_HUNG_TASK - p->last_switch_count = 0; - p->last_switch_timestamp = 0; -#endif - task_io_accounting_init(&p->ioac); acct_clear_integrals(p); diff --git a/kernel/hung_task.c b/kernel/hung_task.c index 3951a80..0c924de 100644 --- a/kernel/hung_task.c +++ b/kernel/hung_task.c @@ -34,7 +34,6 @@ unsigned long __read_mostly sysctl_hung_task_check_count = PID_MAX_LIMIT; * Zero means infinite timeout - no checking done: */ unsigned long __read_mostly sysctl_hung_task_timeout_secs = 120; -static unsigned long __read_mostly hung_task_poll_jiffies; unsigned long __read_mostly sysctl_hung_task_warnings = 10; @@ -69,33 +68,17 @@ static struct notifier_block panic_block = { .notifier_call = hung_task_panic, }; -/* - * Returns seconds, approximately. We don't need nanosecond - * resolution, and we don't need to waste time with a big divide when - * 2^30ns == 1.074s. - */ -static unsigned long get_timestamp(void) -{ - int this_cpu = raw_smp_processor_id(); - - return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */ -} - -static void check_hung_task(struct task_struct *t, unsigned long now, - unsigned long timeout) +static void check_hung_task(struct task_struct *t, unsigned long timeout) { unsigned long switch_count = t->nvcsw + t->nivcsw; if (t->flags & PF_FROZEN) return; - if (switch_count != t->last_switch_count || !t->last_switch_timestamp) { + if (switch_count != t->last_switch_count) { t->last_switch_count = switch_count; - t->last_switch_timestamp = now; return; } - if ((long)(now - t->last_switch_timestamp) < timeout) - return; if (!sysctl_hung_task_warnings) return; sysctl_hung_task_warnings--; @@ -111,7 +94,6 @@ static void check_hung_task(struct task_struct *t, unsigned long now, sched_show_task(t); __debug_show_held_locks(t); - t->last_switch_timestamp = now; touch_nmi_watchdog(); if (sysctl_hung_task_panic) @@ -145,7 +127,6 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout) { int max_count = sysctl_hung_task_check_count; int batch_count = HUNG_TASK_BATCHING; - unsigned long now = get_timestamp(); struct task_struct *g, *t; /* @@ -168,19 +149,16 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout) } /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */ if (t->state == TASK_UNINTERRUPTIBLE) - check_hung_task(t, now, timeout); + check_hung_task(t, timeout); } while_each_thread(g, t); unlock: rcu_read_unlock(); } -static void update_poll_jiffies(void) +static unsigned long timeout_jiffies(unsigned long timeout) { /* timeout of 0 will disable the watchdog */ - if (sysctl_hung_task_timeout_secs == 0) - hung_task_poll_jiffies = MAX_SCHEDULE_TIMEOUT; - else - hung_task_poll_jiffies = sysctl_hung_task_timeout_secs * HZ / 2; + return timeout ? timeout * HZ : MAX_SCHEDULE_TIMEOUT; } /* @@ -197,8 +175,6 @@ int proc_dohung_task_timeout_secs(struct ctl_table *table, int write, if (ret || !write) goto out; - update_poll_jiffies(); - wake_up_process(watchdog_task); out: @@ -211,20 +187,14 @@ int proc_dohung_task_timeout_secs(struct ctl_table *table, int write, static int watchdog(void *dummy) { set_user_nice(current, 0); - update_poll_jiffies(); for ( ; ; ) { - unsigned long timeout; + unsigned long timeout = sysctl_hung_task_timeout_secs; - while (schedule_timeout_interruptible(hung_task_poll_jiffies)); + while (schedule_timeout_interruptible(timeout_jiffies(timeout))) + timeout = sysctl_hung_task_timeout_secs; - /* - * Need to cache timeout here to avoid timeout being set - * to 0 via sysctl while inside check_hung_*_tasks(). - */ - timeout = sysctl_hung_task_timeout_secs; - if (timeout) - check_hung_uninterruptible_tasks(timeout); + check_hung_uninterruptible_tasks(timeout); } return 0; -- cgit v0.10.2 From cf2592f59c0e8ed4308adbdb2e0a88655379d579 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Tue, 10 Feb 2009 16:52:37 +0100 Subject: softlockup: ensure the task has been switched out once When we check if a task has been switched out since the last scan, we might have a race condition on the following scenario: - the task is freshly created and scheduled - it puts its state to TASK_UNINTERRUPTIBLE and is not yet switched out - check_hung_task() scans this task and will report a false positive because t->nvcsw + t->nivcsw == t->last_switch_count == 0 Add a check for such cases. Signed-off-by: Frederic Weisbecker Acked-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar diff --git a/kernel/hung_task.c b/kernel/hung_task.c index 0c924de..022a492 100644 --- a/kernel/hung_task.c +++ b/kernel/hung_task.c @@ -72,7 +72,13 @@ static void check_hung_task(struct task_struct *t, unsigned long timeout) { unsigned long switch_count = t->nvcsw + t->nivcsw; - if (t->flags & PF_FROZEN) + /* + * Ensure the task is not frozen. + * Also, when a freshly created task is scheduled once, changes + * its state to TASK_UNINTERRUPTIBLE without having ever been + * switched out once, it musn't be checked. + */ + if (unlikely(t->flags & PF_FROZEN || !switch_count)) return; if (switch_count != t->last_switch_count) { -- cgit v0.10.2 From 9f8d979f082a3ee1b27f32b7e0811b51c3ad1d15 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 12 Feb 2009 13:10:17 +0100 Subject: softlockup: move 'one' to the softlockup section in sysctl.c CONFIG_SOFTLOCKUP=y || CONFIG_DETECT_HUNG_TASKS=y is now the only user of the 'one' constant in kernel/sysctl.c. Move it to the softlockup block of constants. This fixes a GCC warning. Signed-off-by: Ingo Molnar diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 3b6b54c..6d2aeff 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -90,6 +90,9 @@ extern int rcutorture_runnable; #endif /* #ifdef CONFIG_RCU_TORTURE_TEST */ /* Constants used for minimum and maximum */ +#if defined(CONFIG_DETECT_HUNG_TASK) || defined(CONFIG_DETECT_SOFTLOCKUP) || defined(CONFIG_HIGHMEM) +static int one = 1; +#endif #ifdef CONFIG_DETECT_SOFTLOCKUP static int sixty = 60; static int neg_one = -1; @@ -100,7 +103,6 @@ static int two = 2; #endif static int zero; -static int one = 1; static unsigned long one_ul = 1; static int one_hundred = 100; -- cgit v0.10.2 From 0f4954819fb6f840d46076f0dbd313ef5da48f5d Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Sat, 28 Feb 2009 14:55:46 -0800 Subject: Input: psmouse - add newline to OLPC HGPK touchpad debugging When probing for the OLPC HGPK touchpad the ID of the probed touchpad is emitted, but the debug is missing the terminating newline. This causes later information to run into it, and for that to be categorised incorrectly at KERN_DBG. Fix this up. Reported-by: Matt Zimmerman Signed-off-by: Andy Whitcroft Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index 81e6ebf..a14a6b0 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -472,7 +472,7 @@ static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse) return -EIO; } - hgpk_dbg(psmouse, "ID: %02x %02x %02x", param[0], param[1], param[2]); + hgpk_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]); /* HGPK signature: 0x67, 0x00, 0x */ if (param[0] != 0x67 || param[1] != 0x00) -- cgit v0.10.2 From fa88661224946145819a904cef2ec7dd5c9c78bc Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 4 Mar 2009 00:52:20 -0800 Subject: Input: fix polling of /proc/bus/input/devices Tested-by: Alessio Sangalli Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input.c b/drivers/input/input.c index 46e9ce1..913392f 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -744,11 +744,11 @@ static inline void input_wakeup_procfs_readers(void) static unsigned int input_proc_devices_poll(struct file *file, poll_table *wait) { - int state = input_devices_state; - poll_wait(file, &input_devices_poll_wait, wait); - if (state != input_devices_state) + if (file->f_version != input_devices_state) { + file->f_version = input_devices_state; return POLLIN | POLLRDNORM; + } return 0; } -- cgit v0.10.2 From 65db86ac07e2f7f91a552490c0be6a99aab8e4a8 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 4 Mar 2009 01:12:37 -0800 Subject: Input: wm97xx - add BTN_TOUCH event to wm97xx to use it with Android Android expects BTN_TOUCH events when pen state changes. Add BTN_TOUCH event reporting to allow use of wm97xx touchscreen controller wiht Android devices. Signed-off-by: Mike Rapoport Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index d15aa11..cec480b 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -409,6 +409,7 @@ static int wm97xx_read_samples(struct wm97xx *wm) wm->pen_is_down = 0; dev_dbg(wm->dev, "pen up\n"); input_report_abs(wm->input_dev, ABS_PRESSURE, 0); + input_report_key(wm->input_dev, BTN_TOUCH, 0); input_sync(wm->input_dev); } else if (!(rc & RC_AGAIN)) { /* We need high frequency updates only while @@ -433,6 +434,7 @@ static int wm97xx_read_samples(struct wm97xx *wm) input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff); input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff); input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, 1); input_sync(wm->input_dev); wm->pen_is_down = 1; wm->ts_reader_interval = wm->ts_reader_min_interval; @@ -628,18 +630,21 @@ static int wm97xx_probe(struct device *dev) wm->input_dev->phys = "wm97xx"; wm->input_dev->open = wm97xx_ts_input_open; wm->input_dev->close = wm97xx_ts_input_close; - set_bit(EV_ABS, wm->input_dev->evbit); - set_bit(ABS_X, wm->input_dev->absbit); - set_bit(ABS_Y, wm->input_dev->absbit); - set_bit(ABS_PRESSURE, wm->input_dev->absbit); + + __set_bit(EV_ABS, wm->input_dev->evbit); + __set_bit(EV_KEY, wm->input_dev->evbit); + __set_bit(BTN_TOUCH, wm->input_dev->keybit); + input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1], abs_x[2], 0); input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1], abs_y[2], 0); input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1], abs_p[2], 0); + input_set_drvdata(wm->input_dev, wm); wm->input_dev->dev.parent = dev; + ret = input_register_device(wm->input_dev); if (ret < 0) goto dev_alloc_err; -- cgit v0.10.2 From a700e72dd009c79c62e78ebeefa27315db6e1e60 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 4 Mar 2009 01:12:49 -0800 Subject: Input: wm97xx - use disable_irq_nosync() for Mainstone This should make no practical difference since the Mainstone can't be SMP but it is more correct. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 1d11e2b..08d3dbd 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -245,7 +245,7 @@ static void wm97xx_irq_enable(struct wm97xx *wm, int enable) if (enable) enable_irq(wm->pen_irq); else - disable_irq(wm->pen_irq); + disable_irq_nosync(wm->pen_irq); } static struct wm97xx_mach_ops mainstone_mach_ops = { -- cgit v0.10.2 From cd2d64b1a0a12283d63c9d853d5b1403d5cd6c9d Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 4 Mar 2009 01:12:49 -0800 Subject: Input: ucb1400_ts, mainstone-wm97xx - add BTN_TOUCH events Add BTN_TOUCH event reporting to ucb1400_ts and accelerated mainstone-wm97xx touchscreen drivers. Together with previously posted similar patch for wm97xx-core this will make all touchscreen drivers behave consistently wrt. BTN_TOUCH. Signed-off-by: Mike Rapoport Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 08d3dbd..dfa6a84 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -162,6 +162,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) input_report_abs(wm->input_dev, ABS_X, x & 0xfff); input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, (p != 0)); input_sync(wm->input_dev); reads++; } while (reads < cinfo[sp_idx].reads); diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 5498662..e868264 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -151,12 +151,14 @@ static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 input_report_abs(idev, ABS_X, x); input_report_abs(idev, ABS_Y, y); input_report_abs(idev, ABS_PRESSURE, pressure); + input_report_key(idev, BTN_TOUCH, 1); input_sync(idev); } static void ucb1400_ts_event_release(struct input_dev *idev) { input_report_abs(idev, ABS_PRESSURE, 0); + input_report_key(idev, BTN_TOUCH, 0); input_sync(idev); } @@ -377,7 +379,8 @@ static int ucb1400_ts_probe(struct platform_device *dev) ucb->ts_idev->id.product = ucb->id; ucb->ts_idev->open = ucb1400_ts_open; ucb->ts_idev->close = ucb1400_ts_close; - ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS); + ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); + ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); ucb1400_adc_enable(ucb->ac97); x_res = ucb1400_ts_read_xres(ucb); -- cgit v0.10.2 From 22e39d344f5f3465dffb9e2713bb8d7cf1f5aec8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 4 Mar 2009 01:12:49 -0800 Subject: Input: add accelerated touchscreen support for Marvell Zylonite This patch implements accelerated touchscreen support for the Marvell Zylonite development platform, supporting pen down interrupts and continuous mode data transfers. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index bb6486a..a31d434 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -308,6 +308,19 @@ config TOUCHSCREEN_WM97XX_MAINSTONE To compile this driver as a module, choose M here: the module will be called mainstone-wm97xx. +config TOUCHSCREEN_WM97XX_ZYLONITE + tristate "Zylonite accelerated touch" + depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE + select TOUCHSCREEN_WM9713 + help + Say Y here for support for streaming mode with the touchscreen + on Zylonite systems. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called zylonite-wm97xx. + config TOUCHSCREEN_USB_COMPOSITE tristate "USB Touchscreen Driver" depends on USB_ARCH_HAS_HCD diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index d3375af..82dd918 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -34,3 +34,4 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o +obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c new file mode 100644 index 0000000..41e4359 --- /dev/null +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -0,0 +1,240 @@ +/* + * zylonite-wm97xx.c -- Zylonite Continuous Touch screen driver + * + * Copyright 2004, 2007, 2008 Wolfson Microelectronics PLC. + * Author: Mark Brown + * Parts Copyright : Ian Molton + * Andrew Zabolotny + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Notes: + * This is a wm97xx extended touch driver supporting interrupt driven + * and continuous operation on Marvell Zylonite development systems + * (which have a WM9713 on board). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +struct continuous { + u16 id; /* codec id */ + u8 code; /* continuous code */ + u8 reads; /* number of coord reads per read cycle */ + u32 speed; /* number of coords per second */ +}; + +#define WM_READS(sp) ((sp / HZ) + 1) + +static const struct continuous cinfo[] = { + { WM9713_ID2, 0, WM_READS(94), 94 }, + { WM9713_ID2, 1, WM_READS(120), 120 }, + { WM9713_ID2, 2, WM_READS(154), 154 }, + { WM9713_ID2, 3, WM_READS(188), 188 }, +}; + +/* continuous speed index */ +static int sp_idx; + +/* + * Pen sampling frequency (Hz) in continuous mode. + */ +static int cont_rate = 200; +module_param(cont_rate, int, 0); +MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)"); + +/* + * Pressure readback. + * + * Set to 1 to read back pen down pressure + */ +static int pressure; +module_param(pressure, int, 0); +MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)"); + +/* + * AC97 touch data slot. + * + * Touch screen readback data ac97 slot + */ +static int ac97_touch_slot = 5; +module_param(ac97_touch_slot, int, 0); +MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number"); + + +/* flush AC97 slot 5 FIFO machines */ +static void wm97xx_acc_pen_up(struct wm97xx *wm) +{ + int i; + + msleep(1); + + for (i = 0; i < 16; i++) + MODR; +} + +static int wm97xx_acc_pen_down(struct wm97xx *wm) +{ + u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES; + int reads = 0; + static u16 last, tries; + + /* When the AC97 queue has been drained we need to allow time + * to buffer up samples otherwise we end up spinning polling + * for samples. The controller can't have a suitably low + * threashold set to use the notifications it gives. + */ + msleep(1); + + if (tries > 5) { + tries = 0; + return RC_PENUP; + } + + x = MODR; + if (x == last) { + tries++; + return RC_AGAIN; + } + last = x; + do { + if (reads) + x = MODR; + y = MODR; + if (pressure) + p = MODR; + + /* are samples valid */ + if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X || + (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y || + (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES) + goto up; + + /* coordinate is good */ + tries = 0; + input_report_abs(wm->input_dev, ABS_X, x & 0xfff); + input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); + input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, (p != 0)); + input_sync(wm->input_dev); + reads++; + } while (reads < cinfo[sp_idx].reads); +up: + return RC_PENDOWN | RC_AGAIN; +} + +static int wm97xx_acc_startup(struct wm97xx *wm) +{ + int idx; + + /* check we have a codec */ + if (wm->ac97 == NULL) + return -ENODEV; + + /* Go you big red fire engine */ + for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) { + if (wm->id != cinfo[idx].id) + continue; + sp_idx = idx; + if (cont_rate <= cinfo[idx].speed) + break; + } + wm->acc_rate = cinfo[sp_idx].code; + wm->acc_slot = ac97_touch_slot; + dev_info(wm->dev, + "zylonite accelerated touchscreen driver, %d samples/sec\n", + cinfo[sp_idx].speed); + + return 0; +} + +static void wm97xx_irq_enable(struct wm97xx *wm, int enable) +{ + if (enable) + enable_irq(wm->pen_irq); + else + disable_irq_nosync(wm->pen_irq); +} + +static struct wm97xx_mach_ops zylonite_mach_ops = { + .acc_enabled = 1, + .acc_pen_up = wm97xx_acc_pen_up, + .acc_pen_down = wm97xx_acc_pen_down, + .acc_startup = wm97xx_acc_startup, + .irq_enable = wm97xx_irq_enable, + .irq_gpio = WM97XX_GPIO_2, +}; + +static int zylonite_wm97xx_probe(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + int gpio_touch_irq; + + if (cpu_is_pxa320()) + gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO15); + else + gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26); + + wm->pen_irq = IRQ_GPIO(gpio_touch_irq); + set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH); + + wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_STICKY, + WM97XX_GPIO_WAKE); + wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_NOTSTICKY, + WM97XX_GPIO_NOWAKE); + + return wm97xx_register_mach_ops(wm, &zylonite_mach_ops); +} + +static int zylonite_wm97xx_remove(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + + wm97xx_unregister_mach_ops(wm); + + return 0; +} + +static struct platform_driver zylonite_wm97xx_driver = { + .probe = zylonite_wm97xx_probe, + .remove = zylonite_wm97xx_remove, + .driver = { + .name = "wm97xx-touch", + }, +}; + +static int __init zylonite_wm97xx_init(void) +{ + return platform_driver_register(&zylonite_wm97xx_driver); +} + +static void __exit zylonite_wm97xx_exit(void) +{ + platform_driver_unregister(&zylonite_wm97xx_driver); +} + +module_init(zylonite_wm97xx_init); +module_exit(zylonite_wm97xx_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("wm97xx continuous touch driver for Zylonite"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 391916985b009b8934d00f772a3bde0d8a495ebd Mon Sep 17 00:00:00 2001 From: Daniel Mierswa Date: Wed, 4 Mar 2009 23:27:15 -0800 Subject: Input: atkbd - consolidate force release quirk setup Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 45470f1..9d940db 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -229,7 +229,8 @@ struct atkbd { /* * System-specific ketymap fixup routine */ -static void (*atkbd_platform_fixup)(struct atkbd *); +static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); +static void *atkbd_platform_fixup_data; static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)); @@ -834,87 +835,56 @@ static void atkbd_disconnect(struct serio *serio) } /* - * Most special keys (Fn+F?) on Dell laptops do not generate release - * events so we have to do it ourselves. + * generate release events for the keycodes given in data */ -static void atkbd_dell_laptop_keymap_fixup(struct atkbd *atkbd) +static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd, + const void *data) { - static const unsigned int forced_release_keys[] = { - 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, - }; - int i; + const unsigned int *keys = data; + unsigned int i; if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); + for (i = 0; keys[i] != -1U; i++) + __set_bit(keys[i], atkbd->force_release_mask); } /* + * Most special keys (Fn+F?) on Dell laptops do not generate release + * events so we have to do it ourselves. + */ +static unsigned int atkbd_dell_laptop_forced_release_keys[] = { + 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U +}; + +/* * Perform fixup for HP system that doesn't generate release * for its video switch */ -static void atkbd_hp_keymap_fixup(struct atkbd *atkbd) -{ - static const unsigned int forced_release_keys[] = { - 0x94, - }; - int i; - - if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); -} +static unsigned int atkbd_hp_forced_release_keys[] = { + 0x94, -1U +}; /* * Inventec system with broken key release on volume keys */ -static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd) -{ - const unsigned int forced_release_keys[] = { - 0xae, 0xb0, - }; - int i; - - if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); -} +static unsigned int atkbd_inventec_forced_release_keys[] = { + 0xae, 0xb0, -1U +}; /* * Perform fixup for HP Pavilion ZV6100 laptop that doesn't generate release * for its volume buttons */ -static void atkbd_hp_zv6100_keymap_fixup(struct atkbd *atkbd) -{ - const unsigned int forced_release_keys[] = { - 0xae, 0xb0, - }; - int i; - - if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); -} +static unsigned int atkbd_hp_zv6100_forced_release_keys[] = { + 0xae, 0xb0, -1U +}; /* * Samsung NC10 with Fn+F? key release not working */ -static void atkbd_samsung_keymap_fixup(struct atkbd *atkbd) -{ - const unsigned int forced_release_keys[] = { - 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, - }; - int i; - - if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); -} +static unsigned int atkbd_samsung_forced_release_keys[] = { + 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U +}; /* * atkbd_set_keycode_table() initializes keyboard's keycode table @@ -967,7 +937,7 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd) * Perform additional fixups */ if (atkbd_platform_fixup) - atkbd_platform_fixup(atkbd); + atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data); } /* @@ -1492,9 +1462,11 @@ static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf) return sprintf(buf, "%lu\n", atkbd->err_count); } -static int __init atkbd_setup_fixup(const struct dmi_system_id *id) +static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) { - atkbd_platform_fixup = id->driver_data; + atkbd_platform_fixup = atkbd_apply_forced_release_keylist; + atkbd_platform_fixup_data = id->driver_data; + return 0; } @@ -1505,8 +1477,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_dell_laptop_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_dell_laptop_forced_release_keys, }, { .ident = "Dell Laptop", @@ -1514,8 +1486,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_dell_laptop_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_dell_laptop_forced_release_keys, }, { .ident = "HP 2133", @@ -1523,8 +1495,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_hp_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_forced_release_keys, }, { .ident = "HP Pavilion ZV6100", @@ -1532,8 +1504,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_hp_zv6100_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_zv6100_forced_release_keys, }, { .ident = "Inventec Symphony", @@ -1541,8 +1513,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_inventec_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_inventec_forced_release_keys, }, { .ident = "Samsung NC10", @@ -1550,8 +1522,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_samsung_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, }, { } }; -- cgit v0.10.2 From adcb523eb39e0dd2f712d8dbd8e18b5d36a97825 Mon Sep 17 00:00:00 2001 From: Daniel Mierswa Date: Wed, 4 Mar 2009 23:27:15 -0800 Subject: Input: atkbd - add quirk for Fujitsu Siemens Amilo PA 1510 The volume up and down keys on the Fujitsu Siemens Amilo PA 1510 laptop won't generate release events, so we have to do that. Use the same way that is already used with other models. Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 9d940db..f999dc6 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -887,6 +887,14 @@ static unsigned int atkbd_samsung_forced_release_keys[] = { }; /* + * The volume up and volume down special keys on a Fujitsu Amilo PA 1510 laptop + * do not generate release events so we have to do it ourselves. + */ +static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { + 0xb0, 0xae, -1U +}; + +/* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -1525,6 +1533,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkbd_samsung_forced_release_keys, }, + { + .ident = "Fujitsu Amilo PA 1510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_pa1510_forced_release_keys, + }, { } }; -- cgit v0.10.2 From b0ecc7309443dbcf1a0ce2d93f39f5d92c124d42 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 4 Mar 2009 23:27:15 -0800 Subject: Input: hilkbd - fix crash when removing hilkbd module On parisc machines, which don't have HIL, removing the hilkbd module panics the kernel. Fix this by adding proper implementations for the probe and remove functions to the parisc_driver structure. A few functions were renamed to clean up the code and make it easier readable. Disable the MODULE_DEVICE_TABLE() macro on parisc since the kernel module autoloader should instead prefer the hp_sdc driver which takes care of full HIL support, including HIL mouse and HIL tablets. [dtor@mail.ru: fix some section markups] Signed-off-by: Helge Deller Acked-by: Geert Uytterhoeven Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index aacf71f..e9d639e 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -198,45 +198,28 @@ static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len) } -/* initialise HIL */ -static int __init -hil_keyb_init(void) +/* initialize HIL */ +static int __devinit hil_keyb_init(void) { unsigned char c; unsigned int i, kbid; wait_queue_head_t hil_wait; int err; - if (hil_dev.dev) { + if (hil_dev.dev) return -ENODEV; /* already initialized */ - } + init_waitqueue_head(&hil_wait); spin_lock_init(&hil_dev.lock); + hil_dev.dev = input_allocate_device(); if (!hil_dev.dev) return -ENOMEM; -#if defined(CONFIG_HP300) - if (!MACH_IS_HP300) { - err = -ENODEV; - goto err1; - } - if (!hwreg_present((void *)(HILBASE + HIL_DATA))) { - printk(KERN_ERR "HIL: hardware register was not found\n"); - err = -ENODEV; - goto err1; - } - if (!request_region(HILBASE + HIL_DATA, 2, "hil")) { - printk(KERN_ERR "HIL: IOPORT region already used\n"); - err = -EIO; - goto err1; - } -#endif - err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id); if (err) { printk(KERN_ERR "HIL: Can't get IRQ\n"); - goto err2; + goto err1; } /* Turn on interrupts */ @@ -246,11 +229,9 @@ hil_keyb_init(void) hil_dev.valid = 0; /* clear any pending data */ hil_do(HIL_READKBDSADR, NULL, 0); - init_waitqueue_head(&hil_wait); - wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3*HZ); - if (!hil_dev.valid) { + wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ); + if (!hil_dev.valid) printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n"); - } c = hil_dev.c; hil_dev.valid = 0; @@ -268,7 +249,7 @@ hil_keyb_init(void) for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++) if (hphilkeyb_keycode[i] != KEY_RESERVED) - set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit); + __set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit); hil_dev.dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); hil_dev.dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | @@ -287,34 +268,45 @@ hil_keyb_init(void) err = input_register_device(hil_dev.dev); if (err) { printk(KERN_ERR "HIL: Can't register device\n"); - goto err3; + goto err2; } + printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n", hil_dev.dev->name, kbid, HILBASE, HIL_IRQ); return 0; -err3: +err2: hil_do(HIL_INTOFF, NULL, 0); - disable_irq(HIL_IRQ); free_irq(HIL_IRQ, hil_dev.dev_id); -err2: -#if defined(CONFIG_HP300) - release_region(HILBASE + HIL_DATA, 2); err1: -#endif input_free_device(hil_dev.dev); hil_dev.dev = NULL; return err; } +static void __devexit hil_keyb_exit(void) +{ + if (HIL_IRQ) + free_irq(HIL_IRQ, hil_dev.dev_id); + + /* Turn off interrupts */ + hil_do(HIL_INTOFF, NULL, 0); + + input_unregister_device(hil_dev.dev); + hil_dev.dev = NULL; +} #if defined(CONFIG_PARISC) -static int __init -hil_init_chip(struct parisc_device *dev) +static int __devinit hil_probe_chip(struct parisc_device *dev) { + /* Only allow one HIL keyboard */ + if (hil_dev.dev) + return -ENODEV; + if (!dev->irq) { - printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start); + printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n", + (void *)dev->hpa.start); return -ENODEV; } @@ -327,51 +319,79 @@ hil_init_chip(struct parisc_device *dev) return hil_keyb_init(); } +static int __devexit hil_remove_chip(struct parisc_device *dev) +{ + hil_keyb_exit(); + + return 0; +} + static struct parisc_device_id hil_tbl[] = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 }, { 0, } }; +#if 0 +/* Disabled to avoid conflicts with the HP SDC HIL drivers */ MODULE_DEVICE_TABLE(parisc, hil_tbl); +#endif static struct parisc_driver hil_driver = { - .name = "hil", - .id_table = hil_tbl, - .probe = hil_init_chip, + .name = "hil", + .id_table = hil_tbl, + .probe = hil_probe_chip, + .remove = __devexit_p(hil_remove_chip), }; -#endif /* CONFIG_PARISC */ - static int __init hil_init(void) { -#if defined(CONFIG_PARISC) return register_parisc_driver(&hil_driver); -#else - return hil_keyb_init(); -#endif } - static void __exit hil_exit(void) { - if (HIL_IRQ) { - disable_irq(HIL_IRQ); - free_irq(HIL_IRQ, hil_dev.dev_id); + unregister_parisc_driver(&hil_driver); +} + +#else /* !CONFIG_PARISC */ + +static int __init hil_init(void) +{ + int error; + + /* Only allow one HIL keyboard */ + if (hil_dev.dev) + return -EBUSY; + + if (!MACH_IS_HP300) + return -ENODEV; + + if (!hwreg_present((void *)(HILBASE + HIL_DATA))) { + printk(KERN_ERR "HIL: hardware register was not found\n"); + return -ENODEV; } - /* Turn off interrupts */ - hil_do(HIL_INTOFF, NULL, 0); + if (!request_region(HILBASE + HIL_DATA, 2, "hil")) { + printk(KERN_ERR "HIL: IOPORT region already used\n"); + return -EIO; + } - input_unregister_device(hil_dev.dev); + error = hil_keyb_init(); + if (error) { + release_region(HILBASE + HIL_DATA, 2); + return error; + } - hil_dev.dev = NULL; + return 0; +} -#if defined(CONFIG_PARISC) - unregister_parisc_driver(&hil_driver); -#else - release_region(HILBASE+HIL_DATA, 2); -#endif +static void __exit hil_exit(void) +{ + hil_keyb_exit(); + release_region(HILBASE + HIL_DATA, 2); } +#endif /* CONFIG_PARISC */ + module_init(hil_init); module_exit(hil_exit); -- cgit v0.10.2 From 73969ff0eda233f140bcbed1251431387b43f383 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 4 Mar 2009 23:27:14 -0800 Subject: Input: generic driver for rotary encoders on GPIOs This patch adds a generic driver for rotary encoders connected to GPIO pins of a system. It relies on gpiolib and generic hardware irqs. The documentation that also comes with this patch explains the concept and how to use the driver. Signed-off-by: Daniel Mack Tested-by: H Hartley Sweeten Signed-off-by: Dmitry Torokhov diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt new file mode 100644 index 0000000..435102a --- /dev/null +++ b/Documentation/input/rotary-encoder.txt @@ -0,0 +1,101 @@ +rotary-encoder - a generic driver for GPIO connected devices +Daniel Mack , Feb 2009 + +0. Function +----------- + +Rotary encoders are devices which are connected to the CPU or other +peripherals with two wires. The outputs are phase-shifted by 90 degrees +and by triggering on falling and rising edges, the turn direction can +be determined. + +The phase diagram of these two outputs look like this: + + _____ _____ _____ + | | | | | | + Channel A ____| |_____| |_____| |____ + + : : : : : : : : : : : : + __ _____ _____ _____ + | | | | | | | + Channel B |_____| |_____| |_____| |__ + + : : : : : : : : : : : : + Event a b c d a b c d a b c d + + |<-------->| + one step + + +For more information, please see + http://en.wikipedia.org/wiki/Rotary_encoder + + +1. Events / state machine +------------------------- + +a) Rising edge on channel A, channel B in low state + This state is used to recognize a clockwise turn + +b) Rising edge on channel B, channel A in high state + When entering this state, the encoder is put into 'armed' state, + meaning that there it has seen half the way of a one-step transition. + +c) Falling edge on channel A, channel B in high state + This state is used to recognize a counter-clockwise turn + +d) Falling edge on channel B, channel A in low state + Parking position. If the encoder enters this state, a full transition + should have happend, unless it flipped back on half the way. The + 'armed' state tells us about that. + +2. Platform requirements +------------------------ + +As there is no hardware dependent call in this driver, the platform it is +used with must support gpiolib. Another requirement is that IRQs must be +able to fire on both edges. + + +3. Board integration +-------------------- + +To use this driver in your system, register a platform_device with the +name 'rotary-encoder' and associate the IRQs and some specific platform +data with it. + +struct rotary_encoder_platform_data is declared in +include/linux/rotary-encoder.h and needs to be filled with the number of +steps the encoder has and can carry information about externally inverted +signals (because of used invertig buffer or other reasons). + +Because GPIO to IRQ mapping is platform specific, this information must +be given in seperately to the driver. See the example below. + +------------------ + +/* board support file example */ + +#include +#include + +#define GPIO_ROTARY_A 1 +#define GPIO_ROTARY_B 2 + +static struct rotary_encoder_platform_data my_rotary_encoder_info = { + .steps = 24, + .axis = ABS_X, + .gpio_a = GPIO_ROTARY_A, + .gpio_b = GPIO_ROTARY_B, + .inverted_a = 0, + .inverted_b = 0, +}; + +static struct platform_device rotary_encoder_device = { + .name = "rotary-encoder", + .id = 0, + .dev = { + .platform_data = &my_rotary_encoder_info, + } +}; + diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 67e5553..806d2e6 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -227,4 +227,15 @@ config INPUT_PCF50633_PMU Say Y to include support for delivering PMU events via input layer on NXP PCF50633. +config INPUT_GPIO_ROTARY_ENCODER + tristate "Rotary encoders connected to GPIO pins" + depends on GPIOLIB && GENERIC_GPIO + help + Say Y here to add support for rotary encoders connected to GPIO lines. + Check file:Documentation/incput/rotary_encoder.txt for more + information. + + To compile this driver as a module, choose M here: the + module will be called rotary_encoder. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index bb62e6e..e86cee6 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -22,3 +22,5 @@ obj-$(CONFIG_INPUT_UINPUT) += uinput.o obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o +obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o + diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c new file mode 100644 index 0000000..5bb3ab5 --- /dev/null +++ b/drivers/input/misc/rotary_encoder.c @@ -0,0 +1,221 @@ +/* + * rotary_encoder.c + * + * (c) 2009 Daniel Mack + * + * state machine code inspired by code from Tim Ruetz + * + * A generic driver for rotary encoders connected to GPIO lines. + * See file:Documentation/input/rotary_encoder.txt for more information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "rotary-encoder" + +struct rotary_encoder { + unsigned int irq_a; + unsigned int irq_b; + unsigned int pos; + unsigned int armed; + unsigned int dir; + struct input_dev *input; + struct rotary_encoder_platform_data *pdata; +}; + +static irqreturn_t rotary_encoder_irq(int irq, void *dev_id) +{ + struct rotary_encoder *encoder = dev_id; + struct rotary_encoder_platform_data *pdata = encoder->pdata; + int a = !!gpio_get_value(pdata->gpio_a); + int b = !!gpio_get_value(pdata->gpio_b); + int state; + + a ^= pdata->inverted_a; + b ^= pdata->inverted_b; + state = (a << 1) | b; + + switch (state) { + + case 0x0: + if (!encoder->armed) + break; + + if (encoder->dir) { + /* turning counter-clockwise */ + encoder->pos += pdata->steps; + encoder->pos--; + encoder->pos %= pdata->steps; + } else { + /* turning clockwise */ + encoder->pos++; + encoder->pos %= pdata->steps; + } + + input_report_abs(encoder->input, pdata->axis, encoder->pos); + input_sync(encoder->input); + + encoder->armed = 0; + break; + + case 0x1: + case 0x2: + if (encoder->armed) + encoder->dir = state - 1; + break; + + case 0x3: + encoder->armed = 1; + break; + } + + return IRQ_HANDLED; +} + +static int __devinit rotary_encoder_probe(struct platform_device *pdev) +{ + struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data; + struct rotary_encoder *encoder; + struct input_dev *input; + int err; + + if (!pdata || !pdata->steps) { + dev_err(&pdev->dev, "invalid platform data\n"); + return -ENOENT; + } + + encoder = kzalloc(sizeof(struct rotary_encoder), GFP_KERNEL); + input = input_allocate_device(); + if (!encoder || !input) { + dev_err(&pdev->dev, "failed to allocate memory for device\n"); + err = -ENOMEM; + goto exit_free_mem; + } + + encoder->input = input; + encoder->pdata = pdata; + encoder->irq_a = gpio_to_irq(pdata->gpio_a); + encoder->irq_b = gpio_to_irq(pdata->gpio_b); + + /* create and register the input driver */ + input->name = pdev->name; + input->id.bustype = BUS_HOST; + input->dev.parent = &pdev->dev; + input->evbit[0] = BIT_MASK(EV_ABS); + input_set_abs_params(encoder->input, + pdata->axis, 0, pdata->steps, 0, 1); + + err = input_register_device(input); + if (err) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto exit_free_mem; + } + + /* request the GPIOs */ + err = gpio_request(pdata->gpio_a, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "unable to request GPIO %d\n", + pdata->gpio_a); + goto exit_unregister_input; + } + + err = gpio_request(pdata->gpio_b, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "unable to request GPIO %d\n", + pdata->gpio_b); + goto exit_free_gpio_a; + } + + /* request the IRQs */ + err = request_irq(encoder->irq_a, &rotary_encoder_irq, + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, + DRV_NAME, encoder); + if (err) { + dev_err(&pdev->dev, "unable to request IRQ %d\n", + encoder->irq_a); + goto exit_free_gpio_b; + } + + err = request_irq(encoder->irq_b, &rotary_encoder_irq, + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, + DRV_NAME, encoder); + if (err) { + dev_err(&pdev->dev, "unable to request IRQ %d\n", + encoder->irq_b); + goto exit_free_irq_a; + } + + platform_set_drvdata(pdev, encoder); + + return 0; + +exit_free_irq_a: + free_irq(encoder->irq_a, encoder); +exit_free_gpio_b: + gpio_free(pdata->gpio_b); +exit_free_gpio_a: + gpio_free(pdata->gpio_a); +exit_unregister_input: + input_unregister_device(input); + input = NULL; /* so we don't try to free it */ +exit_free_mem: + input_free_device(input); + kfree(encoder); + return err; +} + +static int __devexit rotary_encoder_remove(struct platform_device *pdev) +{ + struct rotary_encoder *encoder = platform_get_drvdata(pdev); + struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data; + + free_irq(encoder->irq_a, encoder); + free_irq(encoder->irq_b, encoder); + gpio_free(pdata->gpio_a); + gpio_free(pdata->gpio_b); + input_unregister_device(encoder->input); + platform_set_drvdata(pdev, NULL); + kfree(encoder); + + return 0; +} + +static struct platform_driver rotary_encoder_driver = { + .probe = rotary_encoder_probe, + .remove = __devexit_p(rotary_encoder_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + } +}; + +static int __init rotary_encoder_init(void) +{ + return platform_driver_register(&rotary_encoder_driver); +} + +static void __exit rotary_encoder_exit(void) +{ + platform_driver_unregister(&rotary_encoder_driver); +} + +module_init(rotary_encoder_init); +module_exit(rotary_encoder_exit); + +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_DESCRIPTION("GPIO rotary encoder driver"); +MODULE_AUTHOR("Daniel Mack "); +MODULE_LICENSE("GPL v2"); + diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h new file mode 100644 index 0000000..12d63a3 --- /dev/null +++ b/include/linux/rotary_encoder.h @@ -0,0 +1,13 @@ +#ifndef __ROTARY_ENCODER_H__ +#define __ROTARY_ENCODER_H__ + +struct rotary_encoder_platform_data { + unsigned int steps; + unsigned int axis; + unsigned int gpio_a; + unsigned int gpio_b; + unsigned int inverted_a; + unsigned int inverted_b; +}; + +#endif /* __ROTARY_ENCODER_H__ */ -- cgit v0.10.2 From d9bdffd2102404e8ea5f71c5b88dad890984164d Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Wed, 4 Mar 2009 23:27:15 -0800 Subject: Input: add driver for S1 button of rb532 Mikrotik's Routerboard 532 has two builtin buttons, from which one triggers a hardware reset. The other one is accessible through GPIO pin 1. Sadly, this pin is being multiplexed with UART0 input, so enabling it as interrupt source (as implied by the gpio-keys driver) is not possible unless UART0 has been turned off. The later one though is a rather bad idea as the Routerboard is an embedded device with only a single serial port, so it's almost always used as serial console device. This patch adds a driver based on INPUT_POLLDEV, which disables the UART and reconfigures GPIO pin 1 temporarily while reading the button state. This procedure works fine and has been tested as part of another, unpublished driver for this device. Signed-off-by: Phil Sutter Signed-off-by: Dmitry Torokhov diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h index 3cb50d1..12ee8d5 100644 --- a/arch/mips/include/asm/mach-rc32434/gpio.h +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -80,6 +80,9 @@ struct rb532_gpio_reg { /* Compact Flash GPIO pin */ #define CF_GPIO_NUM 13 +/* S1 button GPIO (shared with UART0_SIN) */ +#define GPIO_BTN_S1 1 + extern void rb532_gpio_set_ilevel(int bit, unsigned gpio); extern void rb532_gpio_set_istat(int bit, unsigned gpio); extern void rb532_gpio_set_func(unsigned gpio); diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 4a5f05b..9f40e1f 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -200,26 +200,9 @@ static struct platform_device rb532_led = { .id = -1, }; -static struct gpio_keys_button rb532_gpio_btn[] = { - { - .gpio = 1, - .code = BTN_0, - .desc = "S1", - .active_low = 1, - } -}; - -static struct gpio_keys_platform_data rb532_gpio_btn_data = { - .buttons = rb532_gpio_btn, - .nbuttons = ARRAY_SIZE(rb532_gpio_btn), -}; - static struct platform_device rb532_button = { - .name = "gpio-keys", + .name = "rb532-button", .id = -1, - .dev = { - .platform_data = &rb532_gpio_btn_data, - } }; static struct resource rb532_wdt_res[] = { diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 806d2e6..203abac 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -238,4 +238,16 @@ config INPUT_GPIO_ROTARY_ENCODER To compile this driver as a module, choose M here: the module will be called rotary_encoder. +config INPUT_RB532_BUTTON + tristate "Mikrotik Routerboard 532 button interface" + depends on MIKROTIK_RB532 + depends on GPIOLIB && GENERIC_GPIO + select INPUT_POLLDEV + help + Say Y here if you want support for the S1 button built into + Mikrotik's Routerboard 532. + + To compile this driver as a module, choose M here: the + module will be called rb532_button. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index e86cee6..e94cfd9 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -23,4 +23,5 @@ obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o +obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o diff --git a/drivers/input/misc/rb532_button.c b/drivers/input/misc/rb532_button.c new file mode 100644 index 0000000..e2c7f62 --- /dev/null +++ b/drivers/input/misc/rb532_button.c @@ -0,0 +1,120 @@ +/* + * Support for the S1 button on Routerboard 532 + * + * Copyright (C) 2009 Phil Sutter + */ + +#include +#include +#include + +#include +#include + +#define DRV_NAME "rb532-button" + +#define RB532_BTN_RATE 100 /* msec */ +#define RB532_BTN_KSYM BTN_0 + +/* The S1 button state is provided by GPIO pin 1. But as this + * pin is also used for uart input as alternate function, the + * operational modes must be switched first: + * 1) disable uart using set_latch_u5() + * 2) turn off alternate function implicitly through + * gpio_direction_input() + * 3) read the GPIO's current value + * 4) undo step 2 by enabling alternate function (in this + * mode the GPIO direction is fixed, so no change needed) + * 5) turn on uart again + * The GPIO value occurs to be inverted, so pin high means + * button is not pressed. + */ +static bool rb532_button_pressed(void) +{ + int val; + + set_latch_u5(0, LO_FOFF); + gpio_direction_input(GPIO_BTN_S1); + + val = gpio_get_value(GPIO_BTN_S1); + + rb532_gpio_set_func(GPIO_BTN_S1); + set_latch_u5(LO_FOFF, 0); + + return !val; +} + +static void rb532_button_poll(struct input_polled_dev *poll_dev) +{ + input_report_key(poll_dev->input, RB532_BTN_KSYM, + rb532_button_pressed()); + input_sync(poll_dev->input); +} + +static int __devinit rb532_button_probe(struct platform_device *pdev) +{ + struct input_polled_dev *poll_dev; + int error; + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) + return -ENOMEM; + + poll_dev->poll = rb532_button_poll; + poll_dev->poll_interval = RB532_BTN_RATE; + + poll_dev->input->name = "rb532 button"; + poll_dev->input->phys = "rb532/button0"; + poll_dev->input->id.bustype = BUS_HOST; + poll_dev->input->dev.parent = &pdev->dev; + + dev_set_drvdata(&pdev->dev, poll_dev); + + input_set_capability(poll_dev->input, EV_KEY, RB532_BTN_KSYM); + + error = input_register_polled_device(poll_dev); + if (error) { + input_free_polled_device(poll_dev); + return error; + } + + return 0; +} + +static int __devexit rb532_button_remove(struct platform_device *pdev) +{ + struct input_polled_dev *poll_dev = dev_get_drvdata(&pdev->dev); + + input_unregister_polled_device(poll_dev); + input_free_polled_device(poll_dev); + dev_set_drvdata(&pdev->dev, NULL); + + return 0; +} + +static struct platform_driver rb532_button_driver = { + .probe = rb532_button_probe, + .remove = __devexit_p(rb532_button_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init rb532_button_init(void) +{ + return platform_driver_register(&rb532_button_driver); +} + +static void __exit rb532_button_exit(void) +{ + platform_driver_unregister(&rb532_button_driver); +} + +module_init(rb532_button_init); +module_exit(rb532_button_exit); + +MODULE_AUTHOR("Phil Sutter "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Support for S1 button on Routerboard 532"); +MODULE_ALIAS("platform:" DRV_NAME); -- cgit v0.10.2 From 87f0fd02a4a98df105b8fcfb80f1dcbe28d01cc8 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 6 Mar 2009 01:35:35 -0800 Subject: Input: bf54x-keys - fix typo in warning Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index ee855c5..e94b7d7 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -211,8 +211,8 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT || !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) { - printk(KERN_ERR DRV_NAME - ": Invalid Debounce/Columdrive Time from pdata\n"); + printk(KERN_WARNING DRV_NAME + ": Invalid Debounce/Columndrive Time in platform data\n"); bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */ } else { bfin_write_KPAD_MSEL( -- cgit v0.10.2 From 331b78ed300d9b37bd42dbc8b19f6277151a0dfa Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 9 Mar 2009 20:12:52 -0700 Subject: Input: add AD7877 touchscreen driver [dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index a31d434..afeb755 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -29,6 +29,19 @@ config TOUCHSCREEN_ADS7846 To compile this driver as a module, choose M here: the module will be called ads7846. +config TOUCHSCREEN_AD7877 + tristate "AD7877 based touchscreens" + depends on SPI_MASTER + help + Say Y here if you have a touchscreen interface using the + AD7877 controller, and your board-specific initialization + code includes that in its table of SPI devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7877. + config TOUCHSCREEN_BITSY tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" depends on SA1100_BITSY diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 82dd918..45dfcd6 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -6,6 +6,7 @@ wm97xx-ts-y := wm97xx-core.o +obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c new file mode 100644 index 0000000..e4728a2 --- /dev/null +++ b/drivers/input/touchscreen/ad7877.c @@ -0,0 +1,844 @@ +/* + * Copyright (C) 2006-2008 Michael Hennerich, Analog Devices Inc. + * + * Description: AD7877 based touchscreen, sensor (ADCs), DAC and GPIO driver + * Based on: ads7846.c + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * History: + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * Various changes: Imre Deak + * + * Using code from: + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) + +#define MAX_SPI_FREQ_HZ 20000000 +#define MAX_12BIT ((1<<12)-1) + +#define AD7877_REG_ZEROS 0 +#define AD7877_REG_CTRL1 1 +#define AD7877_REG_CTRL2 2 +#define AD7877_REG_ALERT 3 +#define AD7877_REG_AUX1HIGH 4 +#define AD7877_REG_AUX1LOW 5 +#define AD7877_REG_BAT1HIGH 6 +#define AD7877_REG_BAT1LOW 7 +#define AD7877_REG_BAT2HIGH 8 +#define AD7877_REG_BAT2LOW 9 +#define AD7877_REG_TEMP1HIGH 10 +#define AD7877_REG_TEMP1LOW 11 +#define AD7877_REG_SEQ0 12 +#define AD7877_REG_SEQ1 13 +#define AD7877_REG_DAC 14 +#define AD7877_REG_NONE1 15 +#define AD7877_REG_EXTWRITE 15 +#define AD7877_REG_XPLUS 16 +#define AD7877_REG_YPLUS 17 +#define AD7877_REG_Z2 18 +#define AD7877_REG_aux1 19 +#define AD7877_REG_aux2 20 +#define AD7877_REG_aux3 21 +#define AD7877_REG_bat1 22 +#define AD7877_REG_bat2 23 +#define AD7877_REG_temp1 24 +#define AD7877_REG_temp2 25 +#define AD7877_REG_Z1 26 +#define AD7877_REG_GPIOCTRL1 27 +#define AD7877_REG_GPIOCTRL2 28 +#define AD7877_REG_GPIODATA 29 +#define AD7877_REG_NONE2 30 +#define AD7877_REG_NONE3 31 + +#define AD7877_SEQ_YPLUS_BIT (1<<11) +#define AD7877_SEQ_XPLUS_BIT (1<<10) +#define AD7877_SEQ_Z2_BIT (1<<9) +#define AD7877_SEQ_AUX1_BIT (1<<8) +#define AD7877_SEQ_AUX2_BIT (1<<7) +#define AD7877_SEQ_AUX3_BIT (1<<6) +#define AD7877_SEQ_BAT1_BIT (1<<5) +#define AD7877_SEQ_BAT2_BIT (1<<4) +#define AD7877_SEQ_TEMP1_BIT (1<<3) +#define AD7877_SEQ_TEMP2_BIT (1<<2) +#define AD7877_SEQ_Z1_BIT (1<<1) + +enum { + AD7877_SEQ_YPOS = 0, + AD7877_SEQ_XPOS = 1, + AD7877_SEQ_Z2 = 2, + AD7877_SEQ_AUX1 = 3, + AD7877_SEQ_AUX2 = 4, + AD7877_SEQ_AUX3 = 5, + AD7877_SEQ_BAT1 = 6, + AD7877_SEQ_BAT2 = 7, + AD7877_SEQ_TEMP1 = 8, + AD7877_SEQ_TEMP2 = 9, + AD7877_SEQ_Z1 = 10, + AD7877_NR_SENSE = 11, +}; + +/* DAC Register Default RANGE 0 to Vcc, Volatge Mode, DAC On */ +#define AD7877_DAC_CONF 0x1 + +/* If gpio3 is set AUX3/GPIO3 acts as GPIO Output */ +#define AD7877_EXTW_GPIO_3_CONF 0x1C4 +#define AD7877_EXTW_GPIO_DATA 0x200 + +/* Control REG 2 */ +#define AD7877_TMR(x) ((x & 0x3) << 0) +#define AD7877_REF(x) ((x & 0x1) << 2) +#define AD7877_POL(x) ((x & 0x1) << 3) +#define AD7877_FCD(x) ((x & 0x3) << 4) +#define AD7877_PM(x) ((x & 0x3) << 6) +#define AD7877_ACQ(x) ((x & 0x3) << 8) +#define AD7877_AVG(x) ((x & 0x3) << 10) + +/* Control REG 1 */ +#define AD7877_SER (1 << 11) /* non-differential */ +#define AD7877_DFR (0 << 11) /* differential */ + +#define AD7877_MODE_NOC (0) /* Do not convert */ +#define AD7877_MODE_SCC (1) /* Single channel conversion */ +#define AD7877_MODE_SEQ0 (2) /* Sequence 0 in Slave Mode */ +#define AD7877_MODE_SEQ1 (3) /* Sequence 1 in Master Mode */ + +#define AD7877_CHANADD(x) ((x&0xF)<<7) +#define AD7877_READADD(x) ((x)<<2) +#define AD7877_WRITEADD(x) ((x)<<12) + +#define AD7877_READ_CHAN(x) (AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_SER | \ + AD7877_MODE_SCC | AD7877_CHANADD(AD7877_REG_ ## x) | \ + AD7877_READADD(AD7877_REG_ ## x)) + +#define AD7877_MM_SEQUENCE (AD7877_SEQ_YPLUS_BIT | AD7877_SEQ_XPLUS_BIT | \ + AD7877_SEQ_Z2_BIT | AD7877_SEQ_Z1_BIT) + +/* + * Non-touchscreen sensors only use single-ended conversions. + */ + +struct ser_req { + u16 reset; + u16 ref_on; + u16 command; + u16 sample; + struct spi_message msg; + struct spi_transfer xfer[6]; +}; + +struct ad7877 { + struct input_dev *input; + char phys[32]; + + struct spi_device *spi; + u16 model; + u16 vref_delay_usecs; + u16 x_plate_ohms; + u16 pressure_max; + + u16 cmd_crtl1; + u16 cmd_crtl2; + u16 cmd_dummy; + u16 dac; + + u8 stopacq_polarity; + u8 first_conversion_delay; + u8 acquisition_time; + u8 averaging; + u8 pen_down_acc_interval; + + u16 conversion_data[AD7877_NR_SENSE]; + + struct spi_transfer xfer[AD7877_NR_SENSE + 2]; + struct spi_message msg; + + struct mutex mutex; + unsigned disabled:1; /* P: mutex */ + unsigned gpio3:1; /* P: mutex */ + unsigned gpio4:1; /* P: mutex */ + + spinlock_t lock; + struct timer_list timer; /* P: lock */ + unsigned pending:1; /* P: lock */ +}; + +static int gpio3; +module_param(gpio3, int, 0); +MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3"); + +/* + * ad7877_read/write are only used for initial setup and for sysfs controls. + * The main traffic is done using spi_async() in the interrupt handler. + */ + +static int ad7877_read(struct spi_device *spi, u16 reg) +{ + struct ser_req *req; + int status, ret; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) (AD7877_WRITEADD(AD7877_REG_CTRL1) | + AD7877_READADD(reg)); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + req->xfer[1].rx_buf = &req->sample; + req->xfer[1].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + spi_message_add_tail(&req->xfer[1], &req->msg); + + status = spi_sync(spi, &req->msg); + ret = status ? : req->sample; + + kfree(req); + + return ret; +} + +static int ad7877_write(struct spi_device *spi, u16 reg, u16 val) +{ + struct ser_req *req; + int status; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) (AD7877_WRITEADD(reg) | (val & MAX_12BIT)); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + + status = spi_sync(spi, &req->msg); + + kfree(req); + + return status; +} + +static int ad7877_read_adc(struct spi_device *spi, unsigned command) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + struct ser_req *req; + int status; + int sample; + int i; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + /* activate reference, so it has time to settle; */ + req->ref_on = AD7877_WRITEADD(AD7877_REG_CTRL2) | + AD7877_POL(ts->stopacq_polarity) | + AD7877_AVG(0) | AD7877_PM(2) | AD7877_TMR(0) | + AD7877_ACQ(ts->acquisition_time) | AD7877_FCD(0); + + req->reset = AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_MODE_NOC; + + req->command = (u16) command; + + req->xfer[0].tx_buf = &req->reset; + req->xfer[0].len = 2; + + req->xfer[1].tx_buf = &req->ref_on; + req->xfer[1].len = 2; + req->xfer[1].delay_usecs = ts->vref_delay_usecs; + + req->xfer[2].tx_buf = &req->command; + req->xfer[2].len = 2; + req->xfer[2].delay_usecs = ts->vref_delay_usecs; + + req->xfer[3].rx_buf = &req->sample; + req->xfer[3].len = 2; + + req->xfer[4].tx_buf = &ts->cmd_crtl2; /*REF OFF*/ + req->xfer[4].len = 2; + + req->xfer[5].tx_buf = &ts->cmd_crtl1; /*DEFAULT*/ + req->xfer[5].len = 2; + + /* group all the transfers together, so we can't interfere with + * reading touchscreen state; disable penirq while sampling + */ + for (i = 0; i < 6; i++) + spi_message_add_tail(&req->xfer[i], &req->msg); + + status = spi_sync(spi, &req->msg); + sample = req->sample; + + kfree(req); + + return status ? : sample; +} + +static void ad7877_rx(struct ad7877 *ts) +{ + struct input_dev *input_dev = ts->input; + unsigned Rt; + u16 x, y, z1, z2; + + x = ts->conversion_data[AD7877_SEQ_XPOS] & MAX_12BIT; + y = ts->conversion_data[AD7877_SEQ_YPOS] & MAX_12BIT; + z1 = ts->conversion_data[AD7877_SEQ_Z1] & MAX_12BIT; + z2 = ts->conversion_data[AD7877_SEQ_Z2] & MAX_12BIT; + + /* + * The samples processed here are already preprocessed by the AD7877. + * The preprocessing function consists of an averaging filter. + * The combination of 'first conversion delay' and averaging provides a robust solution, + * discarding the spurious noise in the signal and keeping only the data of interest. + * The size of the averaging filter is programmable. (dev.platform_data, see linux/spi/ad7877.h) + * Other user-programmable conversion controls include variable acquisition time, + * and first conversion delay. Up to 16 averages can be taken per conversion. + */ + + if (likely(x && z1)) { + /* compute touch pressure resistance using equation #1 */ + Rt = (z2 - z1) * x * ts->x_plate_ohms; + Rt /= z1; + Rt = (Rt + 2047) >> 12; + + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, Rt); + input_sync(input_dev); + } +} + +static inline void ad7877_ts_event_release(struct ad7877 *ts) +{ + struct input_dev *input_dev = ts->input; + + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); +} + +static void ad7877_timer(unsigned long handle) +{ + struct ad7877 *ts = (void *)handle; + + ad7877_ts_event_release(ts); +} + +static irqreturn_t ad7877_irq(int irq, void *handle) +{ + struct ad7877 *ts = handle; + unsigned long flags; + int status; + + /* + * The repeated conversion sequencer controlled by TMR kicked off + * too fast. We ignore the last and process the sample sequence + * currently in the queue. It can't be older than 9.4ms, and we + * need to avoid that ts->msg doesn't get issued twice while in work. + */ + + spin_lock_irqsave(&ts->lock, flags); + if (!ts->pending) { + ts->pending = 1; + + status = spi_async(ts->spi, &ts->msg); + if (status) + dev_err(&ts->spi->dev, "spi_sync --> %d\n", status); + } + spin_unlock_irqrestore(&ts->lock, flags); + + return IRQ_HANDLED; +} + +static void ad7877_callback(void *_ts) +{ + struct ad7877 *ts = _ts; + + spin_lock_irq(&ts->lock); + + ad7877_rx(ts); + ts->pending = 0; + mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); + + spin_unlock_irq(&ts->lock); +} + +static void ad7877_disable(struct ad7877 *ts) +{ + mutex_lock(&ts->mutex); + + if (!ts->disabled) { + ts->disabled = 1; + disable_irq(ts->spi->irq); + + /* Wait for spi_async callback */ + while (ts->pending) + msleep(1); + + if (del_timer_sync(&ts->timer)) + ad7877_ts_event_release(ts); + } + + /* we know the chip's in lowpower mode since we always + * leave it that way after every request + */ + + mutex_unlock(&ts->mutex); +} + +static void ad7877_enable(struct ad7877 *ts) +{ + mutex_lock(&ts->mutex); + + if (ts->disabled) { + ts->disabled = 0; + enable_irq(ts->spi->irq); + } + + mutex_unlock(&ts->mutex); +} + +#define SHOW(name) static ssize_t \ +name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct ad7877 *ts = dev_get_drvdata(dev); \ + ssize_t v = ad7877_read_adc(ts->spi, \ + AD7877_READ_CHAN(name)); \ + if (v < 0) \ + return v; \ + return sprintf(buf, "%u\n", (unsigned) v); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL); + +SHOW(aux1) +SHOW(aux2) +SHOW(aux3) +SHOW(bat1) +SHOW(bat2) +SHOW(temp1) +SHOW(temp2) + +static ssize_t ad7877_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t ad7877_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + if (val) + ad7877_disable(ts); + else + ad7877_enable(ts); + + return count; +} + +static DEVICE_ATTR(disable, 0664, ad7877_disable_show, ad7877_disable_store); + +static ssize_t ad7877_dac_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->dac); +} + +static ssize_t ad7877_dac_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->dac = val & 0xFF; + ad7877_write(ts->spi, AD7877_REG_DAC, (ts->dac << 4) | AD7877_DAC_CONF); + mutex_unlock(&ts->mutex); + + return count; +} + +static DEVICE_ATTR(dac, 0664, ad7877_dac_show, ad7877_dac_store); + +static ssize_t ad7877_gpio3_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->gpio3); +} + +static ssize_t ad7877_gpio3_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->gpio3 = !!val; + ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA | + (ts->gpio4 << 4) | (ts->gpio3 << 5)); + mutex_unlock(&ts->mutex); + + return count; +} + +static DEVICE_ATTR(gpio3, 0664, ad7877_gpio3_show, ad7877_gpio3_store); + +static ssize_t ad7877_gpio4_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->gpio4); +} + +static ssize_t ad7877_gpio4_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->gpio4 = !!val; + ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA | + (ts->gpio4 << 4) | (ts->gpio3 << 5)); + mutex_unlock(&ts->mutex); + + return count; +} + +static DEVICE_ATTR(gpio4, 0664, ad7877_gpio4_show, ad7877_gpio4_store); + +static struct attribute *ad7877_attributes[] = { + &dev_attr_temp1.attr, + &dev_attr_temp2.attr, + &dev_attr_aux1.attr, + &dev_attr_aux2.attr, + &dev_attr_bat1.attr, + &dev_attr_bat2.attr, + &dev_attr_disable.attr, + &dev_attr_dac.attr, + &dev_attr_gpio4.attr, + NULL +}; + +static const struct attribute_group ad7877_attr_group = { + .attrs = ad7877_attributes, +}; + +static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts) +{ + struct spi_message *m; + int i; + + ts->cmd_crtl2 = AD7877_WRITEADD(AD7877_REG_CTRL2) | + AD7877_POL(ts->stopacq_polarity) | + AD7877_AVG(ts->averaging) | AD7877_PM(1) | + AD7877_TMR(ts->pen_down_acc_interval) | + AD7877_ACQ(ts->acquisition_time) | + AD7877_FCD(ts->first_conversion_delay); + + ad7877_write(spi, AD7877_REG_CTRL2, ts->cmd_crtl2); + + ts->cmd_crtl1 = AD7877_WRITEADD(AD7877_REG_CTRL1) | + AD7877_READADD(AD7877_REG_XPLUS-1) | + AD7877_MODE_SEQ1 | AD7877_DFR; + + ad7877_write(spi, AD7877_REG_CTRL1, ts->cmd_crtl1); + + ts->cmd_dummy = 0; + + m = &ts->msg; + + spi_message_init(m); + + m->complete = ad7877_callback; + m->context = ts; + + ts->xfer[0].tx_buf = &ts->cmd_crtl1; + ts->xfer[0].len = 2; + + spi_message_add_tail(&ts->xfer[0], m); + + ts->xfer[1].tx_buf = &ts->cmd_dummy; /* Send ZERO */ + ts->xfer[1].len = 2; + + spi_message_add_tail(&ts->xfer[1], m); + + for (i = 0; i < 11; i++) { + ts->xfer[i + 2].rx_buf = &ts->conversion_data[AD7877_SEQ_YPOS + i]; + ts->xfer[i + 2].len = 2; + spi_message_add_tail(&ts->xfer[i + 2], m); + } +} + +static int __devinit ad7877_probe(struct spi_device *spi) +{ + struct ad7877 *ts; + struct input_dev *input_dev; + struct ad7877_platform_data *pdata = spi->dev.platform_data; + int err; + u16 verify; + + if (!spi->irq) { + dev_dbg(&spi->dev, "no IRQ?\n"); + return -ENODEV; + } + + if (!pdata) { + dev_dbg(&spi->dev, "no platform data?\n"); + return -ENODEV; + } + + /* don't exceed max specified SPI CLK frequency */ + if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { + dev_dbg(&spi->dev, "SPI CLK %d Hz?\n",spi->max_speed_hz); + return -EINVAL; + } + + ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + dev_set_drvdata(&spi->dev, ts); + ts->spi = spi; + ts->input = input_dev; + + setup_timer(&ts->timer, ad7877_timer, (unsigned long) ts); + mutex_init(&ts->mutex); + spin_lock_init(&ts->lock); + + ts->model = pdata->model ? : 7877; + ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + + ts->stopacq_polarity = pdata->stopacq_polarity; + ts->first_conversion_delay = pdata->first_conversion_delay; + ts->acquisition_time = pdata->acquisition_time; + ts->averaging = pdata->averaging; + ts->pen_down_acc_interval = pdata->pen_down_acc_interval; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); + + input_dev->name = "AD7877 Touchscreen"; + input_dev->phys = ts->phys; + input_dev->dev.parent = &spi->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + __set_bit(ABS_PRESSURE, input_dev->absbit); + + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + ad7877_write(spi, AD7877_REG_SEQ1, AD7877_MM_SEQUENCE); + + verify = ad7877_read(spi, AD7877_REG_SEQ1); + + if (verify != AD7877_MM_SEQUENCE){ + dev_err(&spi->dev, "%s: Failed to probe %s\n", + dev_name(&spi->dev), input_dev->name); + err = -ENODEV; + goto err_free_mem; + } + + if (gpio3) + ad7877_write(spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_3_CONF); + + ad7877_setup_ts_def_msg(spi, ts); + + /* Request AD7877 /DAV GPIO interrupt */ + + err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING | + IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts); + if (err) { + dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); + goto err_free_mem; + } + + err = sysfs_create_group(&spi->dev.kobj, &ad7877_attr_group); + if (err) + goto err_free_irq; + + err = device_create_file(&spi->dev, + gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3); + if (err) + goto err_remove_attr_group; + + err = input_register_device(input_dev); + if (err) + goto err_remove_attr; + + return 0; + +err_remove_attr: + device_remove_file(&spi->dev, + gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3); +err_remove_attr_group: + sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group); +err_free_irq: + free_irq(spi->irq, ts); +err_free_mem: + input_free_device(input_dev); + kfree(ts); + dev_set_drvdata(&spi->dev, NULL); + return err; +} + +static int __devexit ad7877_remove(struct spi_device *spi) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + + sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group); + device_remove_file(&spi->dev, + gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3); + + ad7877_disable(ts); + free_irq(ts->spi->irq, ts); + + input_unregister_device(ts->input); + kfree(ts); + + dev_dbg(&spi->dev, "unregistered touchscreen\n"); + dev_set_drvdata(&spi->dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int ad7877_suspend(struct spi_device *spi, pm_message_t message) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + + ad7877_disable(ts); + + return 0; +} + +static int ad7877_resume(struct spi_device *spi) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + + ad7877_enable(ts); + + return 0; +} +#else +#define ad7877_suspend NULL +#define ad7877_resume NULL +#endif + +static struct spi_driver ad7877_driver = { + .driver = { + .name = "ad7877", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ad7877_probe, + .remove = __devexit_p(ad7877_remove), + .suspend = ad7877_suspend, + .resume = ad7877_resume, +}; + +static int __init ad7877_init(void) +{ + return spi_register_driver(&ad7877_driver); +} +module_init(ad7877_init); + +static void __exit ad7877_exit(void) +{ + spi_unregister_driver(&ad7877_driver); +} +module_exit(ad7877_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("AD7877 touchscreen Driver"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From b4be468cc1e65110d9144751bf7079dad6f142b7 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 9 Mar 2009 20:12:52 -0700 Subject: Input: add AD7879 Touchscreen driver [randy.dunlap@oracle.com: don't use bus_id] [dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index afeb755..b01fd61d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -42,6 +42,38 @@ config TOUCHSCREEN_AD7877 To compile this driver as a module, choose M here: the module will be called ad7877. +config TOUCHSCREEN_AD7879_I2C + tristate "AD7879 based touchscreens: AD7879-1 I2C Interface" + depends on I2C + select TOUCHSCREEN_AD7879 + help + Say Y here if you have a touchscreen interface using the + AD7879-1 controller, and your board-specific initialization + code includes that in its table of I2C devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7879. + +config TOUCHSCREEN_AD7879_SPI + tristate "AD7879 based touchscreens: AD7879 SPI Interface" + depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n + select TOUCHSCREEN_AD7879 + help + Say Y here if you have a touchscreen interface using the + AD7879 controller, and your board-specific initialization + code includes that in its table of SPI devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7879. + +config TOUCHSCREEN_AD7879 + tristate + default n + config TOUCHSCREEN_BITSY tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" depends on SA1100_BITSY diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 45dfcd6..6700f7b 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -7,6 +7,7 @@ wm97xx-ts-y := wm97xx-core.o obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o +obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c new file mode 100644 index 0000000..ea4c61d --- /dev/null +++ b/drivers/input/touchscreen/ad7879.c @@ -0,0 +1,782 @@ +/* + * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc. + * + * Description: AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface) + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * History: + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * Various changes: Imre Deak + * + * Using code from: + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * - ad7877.c + * Copyright (C) 2006-2008 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define AD7879_REG_ZEROS 0 +#define AD7879_REG_CTRL1 1 +#define AD7879_REG_CTRL2 2 +#define AD7879_REG_CTRL3 3 +#define AD7879_REG_AUX1HIGH 4 +#define AD7879_REG_AUX1LOW 5 +#define AD7879_REG_TEMP1HIGH 6 +#define AD7879_REG_TEMP1LOW 7 +#define AD7879_REG_XPLUS 8 +#define AD7879_REG_YPLUS 9 +#define AD7879_REG_Z1 10 +#define AD7879_REG_Z2 11 +#define AD7879_REG_AUXVBAT 12 +#define AD7879_REG_TEMP 13 +#define AD7879_REG_REVID 14 + +/* Control REG 1 */ +#define AD7879_TMR(x) ((x & 0xFF) << 0) +#define AD7879_ACQ(x) ((x & 0x3) << 8) +#define AD7879_MODE_NOC (0 << 10) /* Do not convert */ +#define AD7879_MODE_SCC (1 << 10) /* Single channel conversion */ +#define AD7879_MODE_SEQ0 (2 << 10) /* Sequence 0 in Slave Mode */ +#define AD7879_MODE_SEQ1 (3 << 10) /* Sequence 1 in Master Mode */ +#define AD7879_MODE_INT (1 << 15) /* PENIRQ disabled INT enabled */ + +/* Control REG 2 */ +#define AD7879_FCD(x) ((x & 0x3) << 0) +#define AD7879_RESET (1 << 4) +#define AD7879_MFS(x) ((x & 0x3) << 5) +#define AD7879_AVG(x) ((x & 0x3) << 7) +#define AD7879_SER (1 << 9) /* non-differential */ +#define AD7879_DFR (0 << 9) /* differential */ +#define AD7879_GPIOPOL (1 << 10) +#define AD7879_GPIODIR (1 << 11) +#define AD7879_GPIO_DATA (1 << 12) +#define AD7879_GPIO_EN (1 << 13) +#define AD7879_PM(x) ((x & 0x3) << 14) +#define AD7879_PM_SHUTDOWN (0) +#define AD7879_PM_DYN (1) +#define AD7879_PM_FULLON (2) + +/* Control REG 3 */ +#define AD7879_TEMPMASK_BIT (1<<15) +#define AD7879_AUXVBATMASK_BIT (1<<14) +#define AD7879_INTMODE_BIT (1<<13) +#define AD7879_GPIOALERTMASK_BIT (1<<12) +#define AD7879_AUXLOW_BIT (1<<11) +#define AD7879_AUXHIGH_BIT (1<<10) +#define AD7879_TEMPLOW_BIT (1<<9) +#define AD7879_TEMPHIGH_BIT (1<<8) +#define AD7879_YPLUS_BIT (1<<7) +#define AD7879_XPLUS_BIT (1<<6) +#define AD7879_Z1_BIT (1<<5) +#define AD7879_Z2_BIT (1<<4) +#define AD7879_AUX_BIT (1<<3) +#define AD7879_VBAT_BIT (1<<2) +#define AD7879_TEMP_BIT (1<<1) + +enum { + AD7879_SEQ_XPOS = 0, + AD7879_SEQ_YPOS = 1, + AD7879_SEQ_Z1 = 2, + AD7879_SEQ_Z2 = 3, + AD7879_NR_SENSE = 4, +}; + +#define MAX_12BIT ((1<<12)-1) +#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#define AD7879_DEVID 0x7A +typedef struct spi_device bus_device; +#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#define AD7879_DEVID 0x79 +typedef struct i2c_client bus_device; +#endif + +struct ad7879 { + bus_device *bus; + struct input_dev *input; + struct work_struct work; + struct timer_list timer; + + struct mutex mutex; + unsigned disabled:1; /* P: mutex */ + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) + struct spi_message msg; + struct spi_transfer xfer[AD7879_NR_SENSE + 1]; + u16 cmd; +#endif + u16 conversion_data[AD7879_NR_SENSE]; + char phys[32]; + u8 first_conversion_delay; + u8 acquisition_time; + u8 averaging; + u8 pen_down_acc_interval; + u8 median; + u16 x_plate_ohms; + u16 pressure_max; + u16 gpio_init; + u16 cmd_crtl1; + u16 cmd_crtl2; + u16 cmd_crtl3; + unsigned gpio:1; +}; + +static int ad7879_read(bus_device *, u8); +static int ad7879_write(bus_device *, u8, u16); +static void ad7879_collect(struct ad7879 *); + +static void ad7879_report(struct ad7879 *ts) +{ + struct input_dev *input_dev = ts->input; + unsigned Rt; + u16 x, y, z1, z2; + + x = ts->conversion_data[AD7879_SEQ_XPOS] & MAX_12BIT; + y = ts->conversion_data[AD7879_SEQ_YPOS] & MAX_12BIT; + z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT; + z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT; + + /* + * The samples processed here are already preprocessed by the AD7879. + * The preprocessing function consists of a median and an averaging filter. + * The combination of these two techniques provides a robust solution, + * discarding the spurious noise in the signal and keeping only the data of interest. + * The size of both filters is programmable. (dev.platform_data, see linux/spi/ad7879.h) + * Other user-programmable conversion controls include variable acquisition time, + * and first conversion delay. Up to 16 averages can be taken per conversion. + */ + + if (likely(x && z1)) { + /* compute touch pressure resistance using equation #1 */ + Rt = (z2 - z1) * x * ts->x_plate_ohms; + Rt /= z1; + Rt = (Rt + 2047) >> 12; + + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, Rt); + input_sync(input_dev); + } +} + +static void ad7879_work(struct work_struct *work) +{ + struct ad7879 *ts = container_of(work, struct ad7879, work); + + /* use keventd context to read the result registers */ + ad7879_collect(ts); + ad7879_report(ts); + mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); +} + +static void ad7879_ts_event_release(struct ad7879 *ts) +{ + struct input_dev *input_dev = ts->input; + + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); +} + +static void ad7879_timer(unsigned long handle) +{ + struct ad7879 *ts = (void *)handle; + + ad7879_ts_event_release(ts); +} + +static irqreturn_t ad7879_irq(int irq, void *handle) +{ + struct ad7879 *ts = handle; + + /* The repeated conversion sequencer controlled by TMR kicked off too fast. + * We ignore the last and process the sample sequence currently in the queue. + * It can't be older than 9.4ms + */ + + if (!work_pending(&ts->work)) + schedule_work(&ts->work); + + return IRQ_HANDLED; +} + +static void ad7879_setup(struct ad7879 *ts) +{ + ts->cmd_crtl3 = AD7879_YPLUS_BIT | + AD7879_XPLUS_BIT | + AD7879_Z2_BIT | + AD7879_Z1_BIT | + AD7879_TEMPMASK_BIT | + AD7879_AUXVBATMASK_BIT | + AD7879_GPIOALERTMASK_BIT; + + ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | + AD7879_AVG(ts->averaging) | + AD7879_MFS(ts->median) | + AD7879_FCD(ts->first_conversion_delay) | + ts->gpio_init; + + ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | + AD7879_ACQ(ts->acquisition_time) | + AD7879_TMR(ts->pen_down_acc_interval); + + ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3); + ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1); +} + +static void ad7879_disable(struct ad7879 *ts) +{ + mutex_lock(&ts->mutex); + + if (!ts->disabled) { + + ts->disabled = 1; + disable_irq(ts->bus->irq); + + cancel_work_sync(&ts->work); + + if (del_timer_sync(&ts->timer)) + ad7879_ts_event_release(ts); + + ad7879_write(ts->bus, AD7879_REG_CTRL2, + AD7879_PM(AD7879_PM_SHUTDOWN)); + } + + mutex_unlock(&ts->mutex); +} + +static void ad7879_enable(struct ad7879 *ts) +{ + mutex_lock(&ts->mutex); + + if (ts->disabled) { + ad7879_setup(ts); + ts->disabled = 0; + enable_irq(ts->bus->irq); + } + + mutex_unlock(&ts->mutex); +} + +static ssize_t ad7879_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t ad7879_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + if (val) + ad7879_disable(ts); + else + ad7879_enable(ts); + + return count; +} + +static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store); + +static ssize_t ad7879_gpio_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->gpio); +} + +static ssize_t ad7879_gpio_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->gpio = !!val; + error = ad7879_write(ts->bus, AD7879_REG_CTRL2, + ts->gpio ? + ts->cmd_crtl2 & ~AD7879_GPIO_DATA : + ts->cmd_crtl2 | AD7879_GPIO_DATA); + mutex_unlock(&ts->mutex); + + return error ? : count; +} + +static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store); + +static struct attribute *ad7879_attributes[] = { + &dev_attr_disable.attr, + &dev_attr_gpio.attr, + NULL +}; + +static const struct attribute_group ad7879_attr_group = { + .attrs = ad7879_attributes, +}; + +static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) +{ + struct input_dev *input_dev; + struct ad7879_platform_data *pdata = bus->dev.platform_data; + int err; + u16 revid; + + if (!bus->irq) { + dev_err(&bus->dev, "no IRQ?\n"); + return -ENODEV; + } + + if (!pdata) { + dev_err(&bus->dev, "no platform data?\n"); + return -ENODEV; + } + + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + ts->input = input_dev; + + setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts); + INIT_WORK(&ts->work, ad7879_work); + mutex_init(&ts->mutex); + + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + + ts->first_conversion_delay = pdata->first_conversion_delay; + ts->acquisition_time = pdata->acquisition_time; + ts->averaging = pdata->averaging; + ts->pen_down_acc_interval = pdata->pen_down_acc_interval; + ts->median = pdata->median; + + if (pdata->gpio_output) + ts->gpio_init = AD7879_GPIO_EN | + (pdata->gpio_default ? 0 : AD7879_GPIO_DATA); + else + ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev)); + + input_dev->name = "AD7879 Touchscreen"; + input_dev->phys = ts->phys; + input_dev->dev.parent = &bus->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + __set_bit(ABS_PRESSURE, input_dev->absbit); + + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + err = ad7879_write(bus, AD7879_REG_CTRL2, AD7879_RESET); + + if (err < 0) { + dev_err(&bus->dev, "Failed to write %s\n", input_dev->name); + goto err_free_mem; + } + + revid = ad7879_read(bus, AD7879_REG_REVID); + + if ((revid & 0xFF) != AD7879_DEVID) { + dev_err(&bus->dev, "Failed to probe %s\n", input_dev->name); + err = -ENODEV; + goto err_free_mem; + } + + ad7879_setup(ts); + + err = request_irq(bus->irq, ad7879_irq, + IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM, + bus->dev.driver->name, ts); + + if (err) { + dev_err(&bus->dev, "irq %d busy?\n", bus->irq); + goto err_free_mem; + } + + err = sysfs_create_group(&bus->dev.kobj, &ad7879_attr_group); + if (err) + goto err_free_irq; + + err = input_register_device(input_dev); + if (err) + goto err_remove_attr; + + dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n", + revid >> 8, bus->irq); + + return 0; + +err_remove_attr: + sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group); +err_free_irq: + free_irq(bus->irq, ts); +err_free_mem: + input_free_device(input_dev); + + return err; +} + +static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts) +{ + ad7879_disable(ts); + sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group); + free_irq(ts->bus->irq, ts); + input_unregister_device(ts->input); + dev_dbg(&bus->dev, "unregistered touchscreen\n"); + + return 0; +} + +#ifdef CONFIG_PM +static int ad7879_suspend(bus_device *bus, pm_message_t message) +{ + struct ad7879 *ts = dev_get_drvdata(&bus->dev); + + ad7879_disable(ts); + + return 0; +} + +static int ad7879_resume(bus_device *bus) +{ + struct ad7879 *ts = dev_get_drvdata(&bus->dev); + + ad7879_enable(ts); + + return 0; +} +#else +#define ad7879_suspend NULL +#define ad7879_resume NULL +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#define MAX_SPI_FREQ_HZ 5000000 +#define AD7879_CMD_MAGIC 0xE000 +#define AD7879_CMD_READ (1 << 10) +#define AD7879_WRITECMD(reg) (AD7879_CMD_MAGIC | (reg & 0xF)) +#define AD7879_READCMD(reg) (AD7879_CMD_MAGIC | AD7879_CMD_READ | (reg & 0xF)) + +struct ser_req { + u16 command; + u16 data; + struct spi_message msg; + struct spi_transfer xfer[2]; +}; + +/* + * ad7879_read/write are only used for initial setup and for sysfs controls. + * The main traffic is done in ad7879_collect(). + */ + +static int ad7879_read(struct spi_device *spi, u8 reg) +{ + struct ser_req *req; + int status, ret; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) AD7879_READCMD(reg); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + req->xfer[1].rx_buf = &req->data; + req->xfer[1].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + spi_message_add_tail(&req->xfer[1], &req->msg); + + status = spi_sync(spi, &req->msg); + ret = status ? : req->data; + + kfree(req); + + return ret; +} + +static int ad7879_write(struct spi_device *spi, u8 reg, u16 val) +{ + struct ser_req *req; + int status; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) AD7879_WRITECMD(reg); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + req->data = val; + req->xfer[1].tx_buf = &req->data; + req->xfer[1].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + spi_message_add_tail(&req->xfer[1], &req->msg); + + status = spi_sync(spi, &req->msg); + + kfree(req); + + return status; +} + +static void ad7879_collect(struct ad7879 *ts) +{ + int status = spi_sync(ts->bus, &ts->msg); + + if (status) + dev_err(&ts->bus->dev, "spi_sync --> %d\n", status); +} + +static void ad7879_setup_ts_def_msg(struct ad7879 *ts) +{ + struct spi_message *m; + int i; + + ts->cmd = (u16) AD7879_READCMD(AD7879_REG_XPLUS); + + m = &ts->msg; + spi_message_init(m); + ts->xfer[0].tx_buf = &ts->cmd; + ts->xfer[0].len = 2; + + spi_message_add_tail(&ts->xfer[0], m); + + for (i = 0; i < AD7879_NR_SENSE; i++) { + ts->xfer[i + 1].rx_buf = &ts->conversion_data[i]; + ts->xfer[i + 1].len = 2; + spi_message_add_tail(&ts->xfer[i + 1], m); + } +} + +static int __devinit ad7879_probe(struct spi_device *spi) +{ + struct ad7879 *ts; + int error; + + /* don't exceed max specified SPI CLK frequency */ + if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { + dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz); + return -EINVAL; + } + + ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, ts); + ts->bus = spi; + + ad7879_setup_ts_def_msg(ts); + + error = ad7879_construct(spi, ts); + if (error) { + dev_set_drvdata(&spi->dev, NULL); + kfree(ts); + } + + return 0; +} + +static int __devexit ad7879_remove(struct spi_device *spi) +{ + struct ad7879 *ts = dev_get_drvdata(&spi->dev); + + ad7879_destroy(spi, ts); + dev_set_drvdata(&spi->dev, NULL); + kfree(ts); + + return 0; +} + +static struct spi_driver ad7879_driver = { + .driver = { + .name = "ad7879", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ad7879_probe, + .remove = __devexit_p(ad7879_remove), + .suspend = ad7879_suspend, + .resume = ad7879_resume, +}; + +static int __init ad7879_init(void) +{ + return spi_register_driver(&ad7879_driver); +} +module_init(ad7879_init); + +static void __exit ad7879_exit(void) +{ + spi_unregister_driver(&ad7879_driver); +} +module_exit(ad7879_exit); + +#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) + +/* All registers are word-sized. + * AD7879 uses a high-byte first convention. + */ +static int ad7879_read(struct i2c_client *client, u8 reg) +{ + return swab16(i2c_smbus_read_word_data(client, reg)); +} + +static int ad7879_write(struct i2c_client *client, u8 reg, u16 val) +{ + return i2c_smbus_write_word_data(client, reg, swab16(val)); +} + +static void ad7879_collect(struct ad7879 *ts) +{ + int i; + + for (i = 0; i < AD7879_NR_SENSE; i++) + ts->conversion_data[i] = ad7879_read(ts->bus, + AD7879_REG_XPLUS + i); +} + +static int __devinit ad7879_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ad7879 *ts; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_err(&client->dev, "SMBUS Word Data not Supported\n"); + return -EIO; + } + + ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + i2c_set_clientdata(client, ts); + ts->bus = client; + + error = ad7879_construct(client, ts); + if (error) { + i2c_set_clientdata(client, NULL); + kfree(ts); + } + + return 0; +} + +static int __devexit ad7879_remove(struct i2c_client *client) +{ + struct ad7879 *ts = dev_get_drvdata(&client->dev); + + ad7879_destroy(client, ts); + i2c_set_clientdata(client, NULL); + kfree(ts); + + return 0; +} + +static const struct i2c_device_id ad7879_id[] = { + { "ad7879", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad7879_id); + +static struct i2c_driver ad7879_driver = { + .driver = { + .name = "ad7879", + .owner = THIS_MODULE, + }, + .probe = ad7879_probe, + .remove = __devexit_p(ad7879_remove), + .suspend = ad7879_suspend, + .resume = ad7879_resume, + .id_table = ad7879_id, +}; + +static int __init ad7879_init(void) +{ + return i2c_add_driver(&ad7879_driver); +} +module_init(ad7879_init); + +static void __exit ad7879_exit(void) +{ + i2c_del_driver(&ad7879_driver); +} +module_exit(ad7879_exit); +#endif + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h new file mode 100644 index 0000000..4231104 --- /dev/null +++ b/include/linux/spi/ad7879.h @@ -0,0 +1,35 @@ +/* linux/spi/ad7879.h */ + +/* Touchscreen characteristics vary between boards and models. The + * platform_data for the device's "struct device" holds this information. + * + * It's OK if the min/max values are zero. + */ +struct ad7879_platform_data { + u16 model; /* 7879 */ + u16 x_plate_ohms; + u16 x_min, x_max; + u16 y_min, y_max; + u16 pressure_min, pressure_max; + + /* [0..255] 0=OFF Starts at 1=550us and goes + * all the way to 9.440ms in steps of 35us. + */ + u8 pen_down_acc_interval; + /* [0..15] Starts at 0=128us and goes all the + * way to 4.096ms in steps of 128us. + */ + u8 first_conversion_delay; + /* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */ + u8 acquisition_time; + /* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */ + u8 averaging; + /* [0..3] Perform X measurements 0 = OFF, + * 1 = 4, 2 = 8, 3 = 16 (median > averaging) + */ + u8 median; + /* 1 = AUX/VBAT/GPIO set to GPIO Output */ + u8 gpio_output; + /* Initial GPIO pin state (valid if gpio_output = 1) */ + u8 gpio_default; +}; -- cgit v0.10.2 From 74f733c7257ca878bf0a4b9365a454ef3fefd196 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 9 Mar 2009 20:15:08 -0700 Subject: Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index e94cfd9..eb3f407 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -4,24 +4,23 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o -obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o -obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o -obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o -obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o -obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o -obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o +obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o -obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o -obj-$(CONFIG_INPUT_POWERMATE) += powermate.o -obj-$(CONFIG_INPUT_YEALINK) += yealink.o +obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_CM109) += cm109.o +obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o -obj-$(CONFIG_INPUT_UINPUT) += uinput.o -obj-$(CONFIG_INPUT_APANEL) += apanel.o -obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o +obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o +obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o +obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o -obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o +obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o +obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o - +obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o +obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o +obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o +obj-$(CONFIG_INPUT_UINPUT) += uinput.o +obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o +obj-$(CONFIG_INPUT_YEALINK) += yealink.o -- cgit v0.10.2 From 3aa551c9b4c40018f0e261a178e3d25478dc04a9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 23 Mar 2009 18:28:15 +0100 Subject: genirq: add threaded interrupt handler support Add support for threaded interrupt handlers: A device driver can request that its main interrupt handler runs in a thread. To achive this the device driver requests the interrupt with request_threaded_irq() and provides additionally to the handler a thread function. The handler function is called in hard interrupt context and needs to check whether the interrupt originated from the device. If the interrupt originated from the device then the handler can either return IRQ_HANDLED or IRQ_WAKE_THREAD. IRQ_HANDLED is returned when no further action is required. IRQ_WAKE_THREAD causes the genirq code to invoke the threaded (main) handler. When IRQ_WAKE_THREAD is returned handler must have disabled the interrupt on the device level. This is mandatory for shared interrupt handlers, but we need to do it as well for obscure x86 hardware where disabling an interrupt on the IO_APIC level redirects the interrupt to the legacy PIC interrupt lines. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index f832883..2dfaadb 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -105,7 +105,7 @@ # define IRQ_EXIT_OFFSET HARDIRQ_OFFSET #endif -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS) extern void synchronize_irq(unsigned int irq); #else # define synchronize_irq(irq) barrier() diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 0c9cb63..6fc2b72 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -59,6 +59,16 @@ #define IRQF_NOBALANCING 0x00000800 #define IRQF_IRQPOLL 0x00001000 +/* + * Bits used by threaded handlers: + * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run + * IRQTF_DIED - handler thread died + */ +enum { + IRQTF_RUNTHREAD, + IRQTF_DIED, +}; + typedef irqreturn_t (*irq_handler_t)(int, void *); /** @@ -71,6 +81,9 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); * @next: pointer to the next irqaction for shared interrupts * @irq: interrupt number * @dir: pointer to the proc/irq/NN/name entry + * @thread_fn: interupt handler function for threaded interrupts + * @thread: thread pointer for threaded interrupts + * @thread_flags: flags related to @thread */ struct irqaction { irq_handler_t handler; @@ -81,11 +94,31 @@ struct irqaction { struct irqaction *next; int irq; struct proc_dir_entry *dir; + irq_handler_t thread_fn; + struct task_struct *thread; + unsigned long thread_flags; }; extern irqreturn_t no_action(int cpl, void *dev_id); -extern int __must_check request_irq(unsigned int, irq_handler_t handler, - unsigned long, const char *, void *); + +extern int __must_check +request_threaded_irq(unsigned int irq, irq_handler_t handler, + irq_handler_t thread_fn, + unsigned long flags, const char *name, void *dev); + +static inline int __must_check +request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, + const char *name, void *dev) +{ + return request_threaded_irq(irq, handler, NULL, flags, name, dev); +} + +#ifdef CONFIG_GENERIC_HARDIRQS +extern void exit_irq_thread(void); +#else +static inline void exit_irq_thread(void) { } +#endif + extern void free_irq(unsigned int, void *); struct device; diff --git a/include/linux/irq.h b/include/linux/irq.h index 873e4ac..8b1cf06 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -155,6 +156,8 @@ struct irq_2_iommu; * @affinity: IRQ affinity on SMP * @cpu: cpu index useful for balancing * @pending_mask: pending rebalanced interrupts + * @threads_active: number of irqaction threads currently running + * @wait_for_threads: wait queue for sync_irq to wait for threaded handlers * @dir: /proc/irq/ procfs entry * @name: flow handler name for /proc/interrupts output */ @@ -186,6 +189,8 @@ struct irq_desc { cpumask_var_t pending_mask; #endif #endif + atomic_t threads_active; + wait_queue_head_t wait_for_threads; #ifdef CONFIG_PROC_FS struct proc_dir_entry *dir; #endif diff --git a/include/linux/irqreturn.h b/include/linux/irqreturn.h index c5584ca..819acaa 100644 --- a/include/linux/irqreturn.h +++ b/include/linux/irqreturn.h @@ -5,10 +5,12 @@ * enum irqreturn * @IRQ_NONE interrupt was not from this device * @IRQ_HANDLED interrupt was handled by this device + * @IRQ_WAKE_THREAD handler requests to wake the handler thread */ enum irqreturn { IRQ_NONE, IRQ_HANDLED, + IRQ_WAKE_THREAD, }; typedef enum irqreturn irqreturn_t; diff --git a/include/linux/sched.h b/include/linux/sched.h index 46d6806..38b77b0 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1292,6 +1292,11 @@ struct task_struct { /* Protection of (de-)allocation: mm, files, fs, tty, keyrings */ spinlock_t alloc_lock; +#ifdef CONFIG_GENERIC_HARDIRQS + /* IRQ handler threads */ + struct irqaction *irqaction; +#endif + /* Protection of the PI data structures: */ spinlock_t pi_lock; diff --git a/kernel/exit.c b/kernel/exit.c index 167e1e3..ca0b348 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -1037,6 +1037,8 @@ NORET_TYPE void do_exit(long code) schedule(); } + exit_irq_thread(); + exit_signals(tsk); /* sets PF_EXITING */ /* * tsk->flags are checked in the futex code to protect against diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c index 9ebf779..fe8f453 100644 --- a/kernel/irq/handle.c +++ b/kernel/irq/handle.c @@ -357,8 +357,37 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action) do { ret = action->handler(irq, action->dev_id); - if (ret == IRQ_HANDLED) + + switch (ret) { + case IRQ_WAKE_THREAD: + /* + * Wake up the handler thread for this + * action. In case the thread crashed and was + * killed we just pretend that we handled the + * interrupt. The hardirq handler above has + * disabled the device interrupt, so no irq + * storm is lurking. + */ + if (likely(!test_bit(IRQTF_DIED, + &action->thread_flags))) { + set_bit(IRQTF_RUNTHREAD, &action->thread_flags); + wake_up_process(action->thread); + } + + /* + * Set it to handled so the spurious check + * does not trigger. + */ + ret = IRQ_HANDLED; + /* Fall through to add to randomness */ + case IRQ_HANDLED: status |= action->flags; + break; + + default: + break; + } + retval |= ret; action = action->next; } while (action); diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 6458e99..a4c1ab8 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -8,16 +8,15 @@ */ #include +#include #include #include #include #include +#include #include "internals.h" -#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS) -cpumask_var_t irq_default_affinity; - /** * synchronize_irq - wait for pending IRQ handlers (on other CPUs) * @irq: interrupt number to wait for @@ -53,9 +52,18 @@ void synchronize_irq(unsigned int irq) /* Oops, that failed? */ } while (status & IRQ_INPROGRESS); + + /* + * We made sure that no hardirq handler is running. Now verify + * that no threaded handlers are active. + */ + wait_event(desc->wait_for_threads, !atomic_read(&desc->threads_active)); } EXPORT_SYMBOL(synchronize_irq); +#ifdef CONFIG_SMP +cpumask_var_t irq_default_affinity; + /** * irq_can_set_affinity - Check if the affinity of a given irq can be set * @irq: Interrupt to check @@ -72,6 +80,18 @@ int irq_can_set_affinity(unsigned int irq) return 1; } +static void +irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask) +{ + struct irqaction *action = desc->action; + + while (action) { + if (action->thread) + set_cpus_allowed_ptr(action->thread, cpumask); + action = action->next; + } +} + /** * irq_set_affinity - Set the irq affinity of a given irq * @irq: Interrupt to set affinity @@ -100,6 +120,7 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask) cpumask_copy(desc->affinity, cpumask); desc->chip->set_affinity(irq, cpumask); #endif + irq_set_thread_affinity(desc, cpumask); desc->status |= IRQ_AFFINITY_SET; spin_unlock_irqrestore(&desc->lock, flags); return 0; @@ -150,6 +171,8 @@ int irq_select_affinity_usr(unsigned int irq) spin_lock_irqsave(&desc->lock, flags); ret = setup_affinity(irq, desc); + if (!ret) + irq_set_thread_affinity(desc, desc->affinity); spin_unlock_irqrestore(&desc->lock, flags); return ret; @@ -384,6 +407,93 @@ int __irq_set_trigger(struct irq_desc *desc, unsigned int irq, return ret; } +static inline int irq_thread_should_run(struct irqaction *action) +{ + return test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags); +} + +static int irq_wait_for_interrupt(struct irqaction *action) +{ + while (!kthread_should_stop()) { + set_current_state(TASK_INTERRUPTIBLE); + if (irq_thread_should_run(action)) { + __set_current_state(TASK_RUNNING); + return 0; + } else + schedule(); + } + return -1; +} + +/* + * Interrupt handler thread + */ +static int irq_thread(void *data) +{ + struct sched_param param = { .sched_priority = MAX_USER_RT_PRIO/2, }; + struct irqaction *action = data; + struct irq_desc *desc = irq_to_desc(action->irq); + int wake; + + sched_setscheduler(current, SCHED_FIFO, ¶m); + current->irqaction = action; + + while (!irq_wait_for_interrupt(action)) { + + atomic_inc(&desc->threads_active); + + spin_lock_irq(&desc->lock); + if (unlikely(desc->status & IRQ_DISABLED)) { + /* + * CHECKME: We might need a dedicated + * IRQ_THREAD_PENDING flag here, which + * retriggers the thread in check_irq_resend() + * but AFAICT IRQ_PENDING should be fine as it + * retriggers the interrupt itself --- tglx + */ + desc->status |= IRQ_PENDING; + spin_unlock_irq(&desc->lock); + } else { + spin_unlock_irq(&desc->lock); + + action->thread_fn(action->irq, action->dev_id); + } + + wake = atomic_dec_and_test(&desc->threads_active); + + if (wake && waitqueue_active(&desc->wait_for_threads)) + wake_up(&desc->wait_for_threads); + } + + /* + * Clear irqaction. Otherwise exit_irq_thread() would make + * fuzz about an active irq thread going into nirvana. + */ + current->irqaction = NULL; + return 0; +} + +/* + * Called from do_exit() + */ +void exit_irq_thread(void) +{ + struct task_struct *tsk = current; + + if (!tsk->irqaction) + return; + + printk(KERN_ERR + "exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n", + tsk->comm ? tsk->comm : "", tsk->pid, tsk->irqaction->irq); + + /* + * Set the THREAD DIED flag to prevent further wakeups of the + * soon to be gone threaded handler. + */ + set_bit(IRQTF_DIED, &tsk->irqaction->flags); +} + /* * Internal function to register an irqaction - typically used to * allocate special interrupts that are part of the architecture. @@ -420,6 +530,26 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) } /* + * Threaded handler ? + */ + if (new->thread_fn) { + struct task_struct *t; + + t = kthread_create(irq_thread, new, "irq/%d-%s", irq, + new->name); + if (IS_ERR(t)) + return PTR_ERR(t); + /* + * We keep the reference to the task struct even if + * the thread dies to avoid that the interrupt code + * references an already freed task_struct. + */ + get_task_struct(t); + new->thread = t; + wake_up_process(t); + } + + /* * The following block of code has to be executed atomically */ spin_lock_irqsave(&desc->lock, flags); @@ -456,15 +586,15 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) if (!shared) { irq_chip_set_defaults(desc->chip); + init_waitqueue_head(&desc->wait_for_threads); + /* Setup the type (level, edge polarity) if configured: */ if (new->flags & IRQF_TRIGGER_MASK) { ret = __irq_set_trigger(desc, irq, new->flags & IRQF_TRIGGER_MASK); - if (ret) { - spin_unlock_irqrestore(&desc->lock, flags); - return ret; - } + if (ret) + goto out_thread; } else compat_irq_chip_set_default_handler(desc); #if defined(CONFIG_IRQ_PER_CPU) @@ -532,8 +662,19 @@ mismatch: dump_stack(); } #endif + ret = -EBUSY; + +out_thread: spin_unlock_irqrestore(&desc->lock, flags); - return -EBUSY; + if (new->thread) { + struct task_struct *t = new->thread; + + new->thread = NULL; + if (likely(!test_bit(IRQTF_DIED, &new->thread_flags))) + kthread_stop(t); + put_task_struct(t); + } + return ret; } /** @@ -559,6 +700,7 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id) { struct irq_desc *desc = irq_to_desc(irq); struct irqaction *action, **action_ptr; + struct task_struct *irqthread; unsigned long flags; WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq); @@ -605,6 +747,10 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id) else desc->chip->disable(irq); } + + irqthread = action->thread; + action->thread = NULL; + spin_unlock_irqrestore(&desc->lock, flags); unregister_handler_proc(irq, action); @@ -612,6 +758,12 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id) /* Make sure it's not being used on another CPU: */ synchronize_irq(irq); + if (irqthread) { + if (!test_bit(IRQTF_DIED, &action->thread_flags)) + kthread_stop(irqthread); + put_task_struct(irqthread); + } + #ifdef CONFIG_DEBUG_SHIRQ /* * It's a shared IRQ -- the driver ought to be prepared for an IRQ @@ -664,9 +816,12 @@ void free_irq(unsigned int irq, void *dev_id) EXPORT_SYMBOL(free_irq); /** - * request_irq - allocate an interrupt line + * request_threaded_irq - allocate an interrupt line * @irq: Interrupt line to allocate - * @handler: Function to be called when the IRQ occurs + * @handler: Function to be called when the IRQ occurs. + * Primary handler for threaded interrupts + * @thread_fn: Function called from the irq handler thread + * If NULL, no irq thread is created * @irqflags: Interrupt type flags * @devname: An ascii name for the claiming device * @dev_id: A cookie passed back to the handler function @@ -678,6 +833,15 @@ EXPORT_SYMBOL(free_irq); * raises, you must take care both to initialise your hardware * and to set up the interrupt handler in the right order. * + * If you want to set up a threaded irq handler for your device + * then you need to supply @handler and @thread_fn. @handler ist + * still called in hard interrupt context and has to check + * whether the interrupt originates from the device. If yes it + * needs to disable the interrupt on the device and return + * IRQ_THREAD_WAKE which will wake up the handler thread and run + * @thread_fn. This split handler design is necessary to support + * shared interrupts. + * * Dev_id must be globally unique. Normally the address of the * device data structure is used as the cookie. Since the handler * receives this value it makes sense to use it. @@ -693,8 +857,9 @@ EXPORT_SYMBOL(free_irq); * IRQF_TRIGGER_* Specify active edge(s) or level * */ -int request_irq(unsigned int irq, irq_handler_t handler, - unsigned long irqflags, const char *devname, void *dev_id) +int request_threaded_irq(unsigned int irq, irq_handler_t handler, + irq_handler_t thread_fn, unsigned long irqflags, + const char *devname, void *dev_id) { struct irqaction *action; struct irq_desc *desc; @@ -742,6 +907,7 @@ int request_irq(unsigned int irq, irq_handler_t handler, return -ENOMEM; action->handler = handler; + action->thread_fn = thread_fn; action->flags = irqflags; action->name = devname; action->dev_id = dev_id; @@ -771,4 +937,4 @@ int request_irq(unsigned int irq, irq_handler_t handler, #endif return retval; } -EXPORT_SYMBOL(request_irq); +EXPORT_SYMBOL(request_threaded_irq); -- cgit v0.10.2 From 935bd5b971f0df7c06d214d022cf8392e2f37952 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 23 Mar 2009 18:28:16 +0100 Subject: genirq: add support for threaded interrupts to devres Some devices use devres_request_irq() for to install their interrupt handler. Add support for threaded interrupts to devres as well. [tglx - simplified and adapted to latest threadirq version] Signed-off-by: Arjan van de Ven Signed-off-by: Thomas Gleixner diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 6fc2b72..dbf6a6f 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -123,9 +123,20 @@ extern void free_irq(unsigned int, void *); struct device; -extern int __must_check devm_request_irq(struct device *dev, unsigned int irq, - irq_handler_t handler, unsigned long irqflags, - const char *devname, void *dev_id); +extern int __must_check +devm_request_threaded_irq(struct device *dev, unsigned int irq, + irq_handler_t handler, irq_handler_t thread_fn, + unsigned long irqflags, const char *devname, + void *dev_id); + +static inline int __must_check +devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler, + unsigned long irqflags, const char *devname, void *dev_id) +{ + return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags, + devname, dev_id); +} + extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id); /* diff --git a/kernel/irq/devres.c b/kernel/irq/devres.c index 38a25b8..d06df9c 100644 --- a/kernel/irq/devres.c +++ b/kernel/irq/devres.c @@ -26,10 +26,12 @@ static int devm_irq_match(struct device *dev, void *res, void *data) } /** - * devm_request_irq - allocate an interrupt line for a managed device + * devm_request_threaded_irq - allocate an interrupt line for a managed device * @dev: device to request interrupt for * @irq: Interrupt line to allocate * @handler: Function to be called when the IRQ occurs + * @thread_fn: function to be called in a threaded interrupt context. NULL + * for devices which handle everything in @handler * @irqflags: Interrupt type flags * @devname: An ascii name for the claiming device * @dev_id: A cookie passed back to the handler function @@ -42,9 +44,10 @@ static int devm_irq_match(struct device *dev, void *res, void *data) * If an IRQ allocated with this function needs to be freed * separately, dev_free_irq() must be used. */ -int devm_request_irq(struct device *dev, unsigned int irq, - irq_handler_t handler, unsigned long irqflags, - const char *devname, void *dev_id) +int devm_request_threaded_irq(struct device *dev, unsigned int irq, + irq_handler_t handler, irq_handler_t thread_fn, + unsigned long irqflags, const char *devname, + void *dev_id) { struct irq_devres *dr; int rc; @@ -54,7 +57,8 @@ int devm_request_irq(struct device *dev, unsigned int irq, if (!dr) return -ENOMEM; - rc = request_irq(irq, handler, irqflags, devname, dev_id); + rc = request_threaded_irq(irq, handler, thread_fn, irqflags, devname, + dev_id); if (rc) { devres_free(dr); return rc; @@ -66,7 +70,7 @@ int devm_request_irq(struct device *dev, unsigned int irq, return 0; } -EXPORT_SYMBOL(devm_request_irq); +EXPORT_SYMBOL(devm_request_threaded_irq); /** * devm_free_irq - free an interrupt -- cgit v0.10.2 From f48fe81e5b032914183e9a17052313720c2cac56 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 24 Mar 2009 11:46:22 +0100 Subject: genirq: threaded irq handlers review fixups Delta patch to address the review comments. - Implement warning when IRQ_WAKE_THREAD is requested and no thread handler installed - coding style fixes Pointed-out-by: Christoph Hellwig Signed-off-by: Thomas Gleixner diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index dbf6a6f..266a5f5 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -63,10 +63,12 @@ * Bits used by threaded handlers: * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run * IRQTF_DIED - handler thread died + * IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed */ enum { IRQTF_RUNTHREAD, IRQTF_DIED, + IRQTF_WARNED, }; typedef irqreturn_t (*irq_handler_t)(int, void *); diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c index fe8f453..38b49a9 100644 --- a/kernel/irq/handle.c +++ b/kernel/irq/handle.c @@ -338,6 +338,15 @@ irqreturn_t no_action(int cpl, void *dev_id) return IRQ_NONE; } +static void warn_no_thread(unsigned int irq, struct irqaction *action) +{ + if (test_and_set_bit(IRQTF_WARNED, &action->thread_flags)) + return; + + printk(KERN_WARNING "IRQ %d device %s returned IRQ_WAKE_THREAD " + "but no thread function available.", irq, action->name); +} + /** * handle_IRQ_event - irq action chain handler * @irq: the interrupt number @@ -361,6 +370,21 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action) switch (ret) { case IRQ_WAKE_THREAD: /* + * Set result to handled so the spurious check + * does not trigger. + */ + ret = IRQ_HANDLED; + + /* + * Catch drivers which return WAKE_THREAD but + * did not set up a thread function + */ + if (unlikely(!action->thread_fn)) { + warn_no_thread(irq, action); + break; + } + + /* * Wake up the handler thread for this * action. In case the thread crashed and was * killed we just pretend that we handled the @@ -374,11 +398,6 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action) wake_up_process(action->thread); } - /* - * Set it to handled so the spurious check - * does not trigger. - */ - ret = IRQ_HANDLED; /* Fall through to add to randomness */ case IRQ_HANDLED: status |= action->flags; diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index a4c1ab8..a3eb7ba 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -407,20 +407,17 @@ int __irq_set_trigger(struct irq_desc *desc, unsigned int irq, return ret; } -static inline int irq_thread_should_run(struct irqaction *action) -{ - return test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags); -} - static int irq_wait_for_interrupt(struct irqaction *action) { while (!kthread_should_stop()) { set_current_state(TASK_INTERRUPTIBLE); - if (irq_thread_should_run(action)) { + + if (test_and_clear_bit(IRQTF_RUNTHREAD, + &action->thread_flags)) { __set_current_state(TASK_RUNNING); return 0; - } else - schedule(); + } + schedule(); } return -1; } @@ -820,8 +817,8 @@ EXPORT_SYMBOL(free_irq); * @irq: Interrupt line to allocate * @handler: Function to be called when the IRQ occurs. * Primary handler for threaded interrupts - * @thread_fn: Function called from the irq handler thread - * If NULL, no irq thread is created + * @thread_fn: Function called from the irq handler thread + * If NULL, no irq thread is created * @irqflags: Interrupt type flags * @devname: An ascii name for the claiming device * @dev_id: A cookie passed back to the handler function -- cgit v0.10.2 From 3a38148f0488069cadb75c4a6909954072d648bf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 24 Mar 2009 20:27:39 +0100 Subject: genirq: provide old request_irq() for CONFIG_GENERIC_HARDIRQ=n Impact: Undo compile breakage for archs with CONFIG_GENERIC_HARDIRQ=n The threaded interrupt handler patches changed request_irq from extern to inline. Architectures which do not use the generic irq code still have request_irq() as a global function and therefor fail to compile. Keep the extern declaration for CONFIG_GENERIC_HARDIRQ=n Signed-off-by: Thomas Gleixner diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 266a5f5..7e63b82 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -103,6 +103,7 @@ struct irqaction { extern irqreturn_t no_action(int cpl, void *dev_id); +#ifdef CONFIG_GENERIC_HARDIRQS extern int __must_check request_threaded_irq(unsigned int irq, irq_handler_t handler, irq_handler_t thread_fn, @@ -115,9 +116,13 @@ request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, return request_threaded_irq(irq, handler, NULL, flags, name, dev); } -#ifdef CONFIG_GENERIC_HARDIRQS extern void exit_irq_thread(void); #else + +extern int __must_check +request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, + const char *name, void *dev); + static inline void exit_irq_thread(void) { } #endif -- cgit v0.10.2 From de18836e447c2dc30120c0919b8db8ddc0401cc4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 25 Mar 2009 17:33:38 +0100 Subject: genirq: fix devres.o build for GENERIC_HARDIRQS=n kernel/irq/devres.c is built by sparc (32bit) and m68k via the obscure ../../../kernel/irq/devres.o reference in arch/[sparc/m68k]/kernel/Makefile To avoid ifdeffery in devres.c provide request_threaded_irq as an inline for these users. Signed-off-by: Thomas Gleixner diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 7e63b82..143192f 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -123,6 +123,20 @@ extern int __must_check request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, const char *name, void *dev); +/* + * Special function to avoid ifdeffery in kernel/irq/devres.c which + * gets magically built by GENERIC_HARDIRQS=n architectures (sparc, + * m68k). I really love these $@%#!* obvious Makefile references: + * ../../../kernel/irq/devres.o + */ +static inline int __must_check +request_threaded_irq(unsigned int irq, irq_handler_t handler, + irq_handler_t thread_fn, + unsigned long flags, const char *name, void *dev) +{ + return request_irq(irq, handler, flags, name, dev); +} + static inline void exit_irq_thread(void) { } #endif -- cgit v0.10.2 From 406107dacde125346c313d34534eed937eb25444 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:11 +0100 Subject: microblaze_v8: Cpuinfo handling Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/cpuinfo.h b/arch/microblaze/include/asm/cpuinfo.h new file mode 100644 index 0000000..52f28f6 --- /dev/null +++ b/arch/microblaze/include/asm/cpuinfo.h @@ -0,0 +1,102 @@ +/* + * Generic support for queying CPU info + * + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#ifndef _ASM_MICROBLAZE_CPUINFO_H +#define _ASM_MICROBLAZE_CPUINFO_H + +#include + +/* CPU Version and FPGA Family code conversion table type */ +struct cpu_ver_key { + const char *s; + const unsigned k; +}; + +extern const struct cpu_ver_key cpu_ver_lookup[]; + +struct family_string_key { + const char *s; + const unsigned k; +}; + +extern const struct family_string_key family_string_lookup[]; + +struct cpuinfo { + /* Core CPU configuration */ + u32 use_instr; + u32 use_mult; + u32 use_fpu; + u32 use_exc; + u32 ver_code; + u32 mmu; + + /* CPU caches */ + u32 use_icache; + u32 icache_tagbits; + u32 icache_write; + u32 icache_line; + u32 icache_size; + unsigned long icache_base; + unsigned long icache_high; + + u32 use_dcache; + u32 dcache_tagbits; + u32 dcache_write; + u32 dcache_line; + u32 dcache_size; + unsigned long dcache_base; + unsigned long dcache_high; + + /* Bus connections */ + u32 use_dopb; + u32 use_iopb; + u32 use_dlmb; + u32 use_ilmb; + u32 num_fsl; + + /* CPU interrupt line info */ + u32 irq_edge; + u32 irq_positive; + + u32 area_optimised; + + /* HW debug support */ + u32 hw_debug; + u32 num_pc_brk; + u32 num_rd_brk; + u32 num_wr_brk; + u32 cpu_clock_freq; /* store real freq of cpu */ + u32 freq_div_hz; /* store freq/HZ */ + + /* FPGA family */ + u32 fpga_family_code; + + /* User define */ + u32 pvr_user1; + u32 pvr_user2; +}; + +extern struct cpuinfo cpuinfo; + +/* fwd declarations of the various CPUinfo populators */ +void setup_cpuinfo(void); + +void set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu); +void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu); + +static inline unsigned int fcpu(struct device_node *cpu, char *n) +{ + int *val; + return (val = (int *) of_get_property(cpu, n, NULL)) ? *val : 0; +} + +#endif /* _ASM_MICROBLAZE_CPUINFO_H */ diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c new file mode 100644 index 0000000..cf7424a --- /dev/null +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -0,0 +1,101 @@ +/* + * Support for MicroBlaze PVR (processor version register) + * + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include + +/* + * Helper macro to map between fields in our struct cpuinfo, and + * the PVR macros in pvr.h. + */ + +#define CI(c, p) { ci->c = PVR_##p(pvr); } +#define err_printk(x) \ + early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n"); + +void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) +{ + struct pvr_s pvr; + int temp; /* for saving temp value */ + get_pvr(&pvr); + + temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\ + PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr); + if (ci->use_instr != temp) + err_printk("BARREL, MSR, PCMP or DIV"); + ci->use_instr = temp; + + temp = PVR_USE_HW_MUL(pvr) | PVR_USE_MUL64(pvr); + if (ci->use_mult != temp) + err_printk("HW_MUL"); + ci->use_mult = temp; + + temp = PVR_USE_FPU(pvr) | PVR_USE_FPU2(pvr); + if (ci->use_fpu != temp) + err_printk("HW_FPU"); + ci->use_fpu = temp; + + ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) |\ + PVR_UNALIGNED_EXCEPTION(pvr) |\ + PVR_ILL_OPCODE_EXCEPTION(pvr) |\ + PVR_IOPB_BUS_EXCEPTION(pvr) |\ + PVR_DOPB_BUS_EXCEPTION(pvr) |\ + PVR_DIV_ZERO_EXCEPTION(pvr) |\ + PVR_FPU_EXCEPTION(pvr) |\ + PVR_FSL_EXCEPTION(pvr); + + CI(pvr_user1, USER1); + CI(pvr_user2, USER2); + + CI(mmu, USE_MMU); + + CI(ver_code, VERSION); + + CI(use_icache, USE_ICACHE); + CI(icache_tagbits, ICACHE_ADDR_TAG_BITS); + CI(icache_write, ICACHE_ALLOW_WR); + CI(icache_line, ICACHE_LINE_LEN); + CI(icache_size, ICACHE_BYTE_SIZE); + CI(icache_base, ICACHE_BASEADDR); + CI(icache_high, ICACHE_HIGHADDR); + + CI(use_dcache, USE_DCACHE); + CI(dcache_tagbits, DCACHE_ADDR_TAG_BITS); + CI(dcache_write, DCACHE_ALLOW_WR); + CI(dcache_line, DCACHE_LINE_LEN); + CI(dcache_size, DCACHE_BYTE_SIZE); + CI(dcache_base, DCACHE_BASEADDR); + CI(dcache_high, DCACHE_HIGHADDR); + + CI(use_dopb, D_OPB); + CI(use_iopb, I_OPB); + CI(use_dlmb, D_LMB); + CI(use_ilmb, I_LMB); + CI(num_fsl, FSL_LINKS); + + CI(irq_edge, INTERRUPT_IS_EDGE); + CI(irq_positive, EDGE_IS_POSITIVE); + + CI(area_optimised, AREA_OPTIMISED); + + CI(hw_debug, DEBUG_ENABLED); + CI(num_pc_brk, NUMBER_OF_PC_BRK); + CI(num_rd_brk, NUMBER_OF_RD_ADDR_BRK); + CI(num_wr_brk, NUMBER_OF_WR_ADDR_BRK); + + CI(fpga_family_code, TARGET_FAMILY); + + /* take timebase-frequency from DTS */ + ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency"); +} diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c new file mode 100644 index 0000000..cfe44ef --- /dev/null +++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include + +const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY; +const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER; + +#define err_printk(x) \ + early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n"); + +void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu) +{ + int i = 0; + + ci->use_instr = + (fcpu(cpu, "xlnx,use-barrel") ? PVR0_USE_BARREL_MASK : 0) | + (fcpu(cpu, "xlnx,use-msr-instr") ? PVR2_USE_MSR_INSTR : 0) | + (fcpu(cpu, "xlnx,use-pcmp-instr") ? PVR2_USE_PCMP_INSTR : 0) | + (fcpu(cpu, "xlnx,use-div") ? PVR0_USE_DIV_MASK : 0); + if (CONFIG_XILINX_MICROBLAZE0_USE_BARREL) + i |= PVR0_USE_BARREL_MASK; + if (CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR) + i |= PVR2_USE_MSR_INSTR; + if (CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) + i |= PVR2_USE_PCMP_INSTR; + if (CONFIG_XILINX_MICROBLAZE0_USE_DIV) + i |= PVR0_USE_DIV_MASK; + if (ci->use_instr != i) + err_printk("BARREL, MSR, PCMP or DIV"); + + ci->use_mult = fcpu(cpu, "xlnx,use-hw-mul"); + if (ci->use_mult != CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) + err_printk("HW_MUL"); + ci->use_mult = + (ci->use_mult > 1 ? + (PVR2_USE_MUL64_MASK | PVR0_USE_HW_MUL_MASK) : + (ci->use_mult == 1 ? PVR0_USE_HW_MUL_MASK : 0)); + + ci->use_fpu = fcpu(cpu, "xlnx,use-fpu"); + if (ci->use_fpu != CONFIG_XILINX_MICROBLAZE0_USE_FPU) + err_printk("HW_FPU"); + ci->use_fpu = (ci->use_fpu > 1 ? + (PVR2_USE_FPU2_MASK | PVR0_USE_FPU_MASK) : + (ci->use_fpu == 1 ? PVR0_USE_FPU_MASK : 0)); + + ci->use_exc = + (fcpu(cpu, "xlnx,unaligned-exceptions") ? + PVR2_UNALIGNED_EXC_MASK : 0) | + (fcpu(cpu, "xlnx,ill-opcode-exception") ? + PVR2_ILL_OPCODE_EXC_MASK : 0) | + (fcpu(cpu, "xlnx,iopb-bus-exception") ? + PVR2_IOPB_BUS_EXC_MASK : 0) | + (fcpu(cpu, "xlnx,dopb-bus-exception") ? + PVR2_DOPB_BUS_EXC_MASK : 0) | + (fcpu(cpu, "xlnx,div-zero-exception") ? + PVR2_DIV_ZERO_EXC_MASK : 0) | + (fcpu(cpu, "xlnx,fpu-exception") ? PVR2_FPU_EXC_MASK : 0) | + (fcpu(cpu, "xlnx,fsl-exception") ? PVR2_USE_EXTEND_FSL : 0); + + ci->use_icache = fcpu(cpu, "xlnx,use-icache"); + ci->icache_tagbits = fcpu(cpu, "xlnx,addr-tag-bits"); + ci->icache_write = fcpu(cpu, "xlnx,allow-icache-wr"); + ci->icache_line = fcpu(cpu, "xlnx,icache-line-len") << 2; + if (!ci->icache_line) { + if (fcpu(cpu, "xlnx,icache-use-fsl")) + ci->icache_line = 4 << 2; + else + ci->icache_line = 1 << 2; + } + ci->icache_size = fcpu(cpu, "i-cache-size"); + ci->icache_base = fcpu(cpu, "i-cache-baseaddr"); + ci->icache_high = fcpu(cpu, "i-cache-highaddr"); + + ci->use_dcache = fcpu(cpu, "xlnx,use-dcache"); + ci->dcache_tagbits = fcpu(cpu, "xlnx,dcache-addr-tag"); + ci->dcache_write = fcpu(cpu, "xlnx,allow-dcache-wr"); + ci->dcache_line = fcpu(cpu, "xlnx,dcache-line-len") << 2; + if (!ci->dcache_line) { + if (fcpu(cpu, "xlnx,dcache-use-fsl")) + ci->dcache_line = 4 << 2; + else + ci->dcache_line = 1 << 2; + } + ci->dcache_size = fcpu(cpu, "d-cache-size"); + ci->dcache_base = fcpu(cpu, "d-cache-baseaddr"); + ci->dcache_high = fcpu(cpu, "d-cache-highaddr"); + + ci->use_dopb = fcpu(cpu, "xlnx,d-opb"); + ci->use_iopb = fcpu(cpu, "xlnx,i-opb"); + ci->use_dlmb = fcpu(cpu, "xlnx,d-lmb"); + ci->use_ilmb = fcpu(cpu, "xlnx,i-lmb"); + + ci->num_fsl = fcpu(cpu, "xlnx,fsl-links"); + ci->irq_edge = fcpu(cpu, "xlnx,interrupt-is-edge"); + ci->irq_positive = fcpu(cpu, "xlnx,edge-is-positive"); + ci->area_optimised = 0; + + ci->hw_debug = fcpu(cpu, "xlnx,debug-enabled"); + ci->num_pc_brk = fcpu(cpu, "xlnx,number-of-pc-brk"); + ci->num_rd_brk = fcpu(cpu, "xlnx,number-of-rd-addr-brk"); + ci->num_wr_brk = fcpu(cpu, "xlnx,number-of-wr-addr-brk"); + + ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency"); + + ci->pvr_user1 = fcpu(cpu, "xlnx,pvr-user1"); + ci->pvr_user2 = fcpu(cpu, "xlnx,pvr-user2"); + + ci->mmu = fcpu(cpu, "xlnx,use-mmu"); + + ci->ver_code = 0; + ci->fpga_family_code = 0; + + /* Do various fixups based on CPU version and FPGA family strings */ + + /* Resolved the CPU version code */ + for (i = 0; cpu_ver_lookup[i].s != NULL; i++) { + if (strcmp(cpu_ver_lookup[i].s, cpu_ver_string) == 0) + ci->ver_code = cpu_ver_lookup[i].k; + } + + /* Resolved the fpga family code */ + for (i = 0; family_string_lookup[i].s != NULL; i++) { + if (strcmp(family_string_lookup[i].s, family_string) == 0) + ci->fpga_family_code = family_string_lookup[i].k; + } + + /* FIXME - mb3 and spartan2 do not exist in PVR */ + /* This is mb3 and on a non Spartan2 */ + if (ci->ver_code == 0x20 && ci->fpga_family_code != 0xf0) + /* Hardware Multiplier in use */ + ci->use_mult = 1; +} diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c new file mode 100644 index 0000000..4a740df --- /dev/null +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include + +const struct cpu_ver_key cpu_ver_lookup[] = { + /* These key value are as per MBV field in PVR0 */ + {"5.00.a", 0x01}, + {"5.00.b", 0x02}, + {"5.00.c", 0x03}, + {"6.00.a", 0x04}, + {"6.00.b", 0x06}, + {"7.00.a", 0x05}, + {"7.00.b", 0x07}, + {"7.10.a", 0x08}, + {"7.10.b", 0x09}, + {"7.10.c", 0x0a}, + {"7.10.d", 0x0b}, + /* FIXME There is no keycode defined in MBV for these versions */ + {"2.10.a", 0x10}, + {"3.00.a", 0x20}, + {"4.00.a", 0x30}, + {"4.00.b", 0x40}, + {NULL, 0}, +}; + +/* + * FIXME Not sure if the actual key is defined by Xilinx in the PVR + */ +const struct family_string_key family_string_lookup[] = { + {"virtex2", 0x4}, + {"virtex2pro", 0x5}, + {"spartan3", 0x6}, + {"virtex4", 0x7}, + {"virtex5", 0x8}, + {"spartan3e", 0x9}, + {"spartan3a", 0xa}, + {"spartan3an", 0xb}, + {"spartan3adsp", 0xc}, + /* FIXME There is no key code defined for spartan2 */ + {"spartan2", 0xf0}, + {NULL, 0}, +}; + +struct cpuinfo cpuinfo; + +void __init setup_cpuinfo(void) +{ + struct device_node *cpu = NULL; + + cpu = (struct device_node *) of_find_node_by_type(NULL, "cpu"); + if (!cpu) + printk(KERN_ERR "You don't have cpu!!!\n"); + + printk(KERN_INFO "%s: initialising\n", __func__); + + switch (cpu_has_pvr()) { + case 0: + printk(KERN_WARNING + "%s: No PVR support. Using static CPU info from FDT\n", + __func__); + set_cpuinfo_static(&cpuinfo, cpu); + break; +/* FIXME I found weird behavior with MB 7.00.a/b + * please do not use FULL PVR with MMU */ + case 1: + printk(KERN_INFO "%s: Using full CPU PVR support\n", + __func__); + set_cpuinfo_static(&cpuinfo, cpu); + set_cpuinfo_pvr_full(&cpuinfo, cpu); + break; + default: + printk(KERN_WARNING "%s: Unsupported PVR setting\n", __func__); + set_cpuinfo_static(&cpuinfo, cpu); + } +} -- cgit v0.10.2 From 12e8414263f47352b3fec8ba5efff160584202e0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:12 +0100 Subject: microblaze_v8: Open firmware files Reviewed-by: Ingo Molnar Reviewed-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/of_device.h b/arch/microblaze/include/asm/of_device.h new file mode 100644 index 0000000..ba917cf --- /dev/null +++ b/arch/microblaze/include/asm/of_device.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2007-2008 Michal Simek + * + * based on PowerPC of_device.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_OF_DEVICE_H +#define _ASM_MICROBLAZE_OF_DEVICE_H +#ifdef __KERNEL__ + +#include +#include + +/* + * The of_device is a kind of "base class" that is a superset of + * struct device for use by devices attached to an OF node and + * probed using OF properties. + */ +struct of_device { + struct device_node *node; /* to be obsoleted */ + u64 dma_mask; /* DMA mask */ + struct device dev; /* Generic device interface */ +}; + +extern ssize_t of_device_get_modalias(struct of_device *ofdev, + char *str, ssize_t len); + +extern struct of_device *of_device_alloc(struct device_node *np, + const char *bus_id, + struct device *parent); + +extern int of_device_uevent(struct device *dev, + struct kobj_uevent_env *env); + +extern void of_device_make_bus_id(struct of_device *dev); + +/* This is just here during the transition */ +#include + +#endif /* __KERNEL__ */ +#endif /* _ASM_MICROBLAZE_OF_DEVICE_H */ diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h new file mode 100644 index 0000000..187c0ee --- /dev/null +++ b/arch/microblaze/include/asm/of_platform.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MICROBLAZE_OF_PLATFORM_H +#define _ASM_MICROBLAZE_OF_PLATFORM_H + +/* This is just here during the transition */ +#include + +/* + * The list of OF IDs below is used for matching bus types in the + * system whose devices are to be exposed as of_platform_devices. + * + * This is the default list valid for most platforms. This file provides + * functions who can take an explicit list if necessary though + * + * The search is always performed recursively looking for children of + * the provided device_node and recursively if such a children matches + * a bus type in the list + */ + +static const struct of_device_id of_default_bus_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "plb5", }, + { .type = "plb4", }, + { .type = "opb", }, + { .type = "simple", }, + {}, +}; + +/* Platform drivers register/unregister */ +static inline int of_register_platform_driver(struct of_platform_driver *drv) +{ + return of_register_driver(drv, &of_platform_bus_type); +} +static inline void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + of_unregister_driver(drv); +} + +/* Platform devices and busses creation */ +extern struct of_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent); +/* pseudo "matches" value to not do deep probe */ +#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) + +extern int of_platform_bus_probe(struct device_node *root, + const struct of_device_id *matches, + struct device *parent); + +extern struct of_device *of_find_device_by_phandle(phandle ph); + +extern void of_instantiate_rtc(void); + +#endif /* _ASM_MICROBLAZE_OF_PLATFORM_H */ diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h new file mode 100644 index 0000000..20f7b3a --- /dev/null +++ b/arch/microblaze/include/asm/prom.h @@ -0,0 +1,313 @@ +/* + * Definitions for talking to the Open Firmware PROM on + * Power Macintosh computers. + * + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MICROBLAZE_PROM_H +#define _ASM_MICROBLAZE_PROM_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 +#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 + +#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l)) +#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) +#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) + +/* Definitions used by the flattened device tree */ +#define OF_DT_HEADER 0xd00dfeed /* marker */ +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 + +#define OF_DT_VERSION 0x10 + +/* + * This is what gets passed to the kernel by prom_init or kexec + * + * The dt struct contains the device tree structure, full pathes and + * property contents. The dt strings contain a separate block with just + * the strings for the property names, and is fully page aligned and + * self contained in a page, so that it can be kept around by the kernel, + * each property name appears only once in this page (cheap compression) + * + * the mem_rsvmap contains a map of reserved ranges of physical memory, + * passing it here instead of in the device-tree itself greatly simplifies + * the job of everybody. It's just a list of u64 pairs (base/size) that + * ends when size is 0 + */ +struct boot_param_header { + u32 magic; /* magic word OF_DT_HEADER */ + u32 totalsize; /* total size of DT block */ + u32 off_dt_struct; /* offset to structure */ + u32 off_dt_strings; /* offset to strings */ + u32 off_mem_rsvmap; /* offset to memory reserve map */ + u32 version; /* format version */ + u32 last_comp_version; /* last compatible version */ + /* version 2 fields below */ + u32 boot_cpuid_phys; /* Physical CPU id we're booting on */ + /* version 3 fields below */ + u32 dt_strings_size; /* size of the DT strings block */ + /* version 17 fields below */ + u32 dt_struct_size; /* size of the DT structure block */ +}; + +typedef u32 phandle; +typedef u32 ihandle; + +struct property { + char *name; + int length; + void *value; + struct property *next; +}; + +struct device_node { + const char *name; + const char *type; + phandle node; + phandle linux_phandle; + char *full_name; + + struct property *properties; + struct property *deadprops; /* removed properties */ + struct device_node *parent; + struct device_node *child; + struct device_node *sibling; + struct device_node *next; /* next device of same type */ + struct device_node *allnext; /* next in list of all nodes */ + struct proc_dir_entry *pde; /* this node's proc directory */ + struct kref kref; + unsigned long _flags; + void *data; +}; + +extern struct device_node *of_chosen; + +static inline int of_node_check_flag(struct device_node *n, unsigned long flag) +{ + return test_bit(flag, &n->_flags); +} + +static inline void of_node_set_flag(struct device_node *n, unsigned long flag) +{ + set_bit(flag, &n->_flags); +} + +#define HAVE_ARCH_DEVTREE_FIXUPS + +static inline void set_node_proc_entry(struct device_node *dn, + struct proc_dir_entry *de) +{ + dn->pde = de; +} + +extern struct device_node *allnodes; /* temporary while merging */ +extern rwlock_t devtree_lock; /* temporary while merging */ + +extern struct device_node *of_find_all_nodes(struct device_node *prev); +extern struct device_node *of_node_get(struct device_node *node); +extern void of_node_put(struct device_node *node); + +/* For scanning the flat device-tree at boot time */ +extern int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data); +extern void *__init of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size); +extern int __init + of_flat_dt_is_compatible(unsigned long node, const char *name); +extern unsigned long __init of_get_flat_dt_root(void); + +/* For updating the device tree at runtime */ +extern void of_attach_node(struct device_node *); +extern void of_detach_node(struct device_node *); + +/* Other Prototypes */ +extern void finish_device_tree(void); +extern void unflatten_device_tree(void); +extern int early_uartlite_console(void); +extern void early_init_devtree(void *); +extern int machine_is_compatible(const char *compat); +extern void print_properties(struct device_node *node); +extern int prom_n_intr_cells(struct device_node *np); +extern void prom_get_irq_senses(unsigned char *senses, int off, int max); +extern int prom_add_property(struct device_node *np, struct property *prop); +extern int prom_remove_property(struct device_node *np, struct property *prop); +extern int prom_update_property(struct device_node *np, + struct property *newprop, + struct property *oldprop); + +extern struct resource *request_OF_resource(struct device_node *node, + int index, const char *name_postfix); +extern int release_OF_resource(struct device_node *node, int index); + +/* + * OF address retreival & translation + */ + +/* Helper to read a big number; size is in cells (not bytes) */ +static inline u64 of_read_number(const u32 *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | *(cell++); + return r; +} + +/* Like of_read_number, but we want an unsigned long result */ +#define of_read_ulong(cell, size) of_read_number(cell, size) + +/* Translate an OF address block into a CPU physical address + */ +extern u64 of_translate_address(struct device_node *np, const u32 *addr); + +/* Extract an address from a device, returns the region size and + * the address space flags too. The PCI version uses a BAR number + * instead of an absolute index + */ +extern const u32 *of_get_address(struct device_node *dev, int index, + u64 *size, unsigned int *flags); +extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, + u64 *size, unsigned int *flags); + +/* Get an address as a resource. Note that if your address is + * a PIO address, the conversion will fail if the physical address + * can't be internally converted to an IO token with + * pci_address_to_pio(), that is because it's either called to early + * or it can't be matched to any host bridge IO space + */ +extern int of_address_to_resource(struct device_node *dev, int index, + struct resource *r); +extern int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r); + +/* Parse the ibm,dma-window property of an OF node into the busno, phys and + * size parameters. + */ +void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, + unsigned long *busno, unsigned long *phys, unsigned long *size); + +extern void kdump_move_device_tree(void); + +/* CPU OF node matching */ +struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); + +/* Get the MAC address */ +extern const void *of_get_mac_address(struct device_node *np); + +/* + * OF interrupt mapping + */ + +/* This structure is returned when an interrupt is mapped. The controller + * field needs to be put() after use + */ + +#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ + +struct of_irq { + struct device_node *controller; /* Interrupt controller node */ + u32 size; /* Specifier size */ + u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ +}; + +/** + * of_irq_map_init - Initialize the irq remapper + * @flags: flags defining workarounds to enable + * + * Some machines have bugs in the device-tree which require certain workarounds + * to be applied. Call this before any interrupt mapping attempts to enable + * those workarounds. + */ +#define OF_IMAP_OLDWORLD_MAC 0x00000001 +#define OF_IMAP_NO_PHANDLE 0x00000002 + +extern void of_irq_map_init(unsigned int flags); + +/** + * of_irq_map_raw - Low level interrupt tree parsing + * @parent: the device interrupt parent + * @intspec: interrupt specifier ("interrupts" property of the device) + * @ointsize: size of the passed in interrupt specifier + * @addr: address specifier (start of "reg" property of the device) + * @out_irq: structure of_irq filled by this function + * + * Returns 0 on success and a negative number on error + * + * This function is a low-level interrupt tree walking function. It + * can be used to do a partial walk with synthetized reg and interrupts + * properties, for example when resolving PCI interrupts when no device + * node exist for the parent. + * + */ + +extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, + u32 ointsize, const u32 *addr, + struct of_irq *out_irq); + +/** + * of_irq_map_one - Resolve an interrupt for a device + * @device: the device whose interrupt is to be resolved + * @index: index of the interrupt to resolve + * @out_irq: structure of_irq filled by this function + * + * This function resolves an interrupt, walking the tree, for a given + * device-tree node. It's the high level pendant to of_irq_map_raw(). + * It also implements the workarounds for OldWolrd Macs. + */ +extern int of_irq_map_one(struct device_node *device, int index, + struct of_irq *out_irq); + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +struct pci_dev; +extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); + +extern int of_irq_to_resource(struct device_node *dev, int index, + struct resource *r); + +/** + * of_iomap - Maps the memory mapped IO for a given device_node + * @device: the device whose io range will be mapped + * @index: index of the io range + * + * Returns a pointer to the mapped memory + */ +extern void __iomem *of_iomap(struct device_node *device, int index); + +/* + * NB: This is here while we transition from using asm/prom.h + * to linux/of.h + */ +#include + +#endif /* __KERNEL__ */ +#endif /* _ASM_MICROBLAZE_PROM_H */ diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c new file mode 100644 index 0000000..717edf4 --- /dev/null +++ b/arch/microblaze/kernel/of_device.c @@ -0,0 +1,115 @@ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +void of_device_make_bus_id(struct of_device *dev) +{ + static atomic_t bus_no_reg_magic; + struct device_node *node = dev->node; + char *name = dev->dev.bus_id; + const u32 *reg; + u64 addr; + int magic; + + /* + * For MMIO, get the physical address + */ + reg = of_get_property(node, "reg", NULL); + if (reg) { + addr = of_translate_address(node, reg); + if (addr != OF_BAD_ADDR) { + snprintf(name, BUS_ID_SIZE, + "%llx.%s", (unsigned long long)addr, + node->name); + return; + } + } + + /* + * No BusID, use the node name and add a globally incremented + * counter (and pray...) + */ + magic = atomic_add_return(1, &bus_no_reg_magic); + snprintf(name, BUS_ID_SIZE, "%s.%d", node->name, magic - 1); +} +EXPORT_SYMBOL(of_device_make_bus_id); + +struct of_device *of_device_alloc(struct device_node *np, + const char *bus_id, + struct device *parent) +{ + struct of_device *dev; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return NULL; + + dev->node = of_node_get(np); + dev->dev.dma_mask = &dev->dma_mask; + dev->dev.parent = parent; + dev->dev.release = of_release_dev; + dev->dev.archdata.of_node = np; + + if (bus_id) + strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE); + else + of_device_make_bus_id(dev); + + return dev; +} +EXPORT_SYMBOL(of_device_alloc); + +int of_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct of_device *ofdev; + const char *compat; + int seen = 0, cplen, sl; + + if (!dev) + return -ENODEV; + + ofdev = to_of_device(dev); + + if (add_uevent_var(env, "OF_NAME=%s", ofdev->node->name)) + return -ENOMEM; + + if (add_uevent_var(env, "OF_TYPE=%s", ofdev->node->type)) + return -ENOMEM; + + /* Since the compatible field can contain pretty much anything + * it's not really legal to split it out with commas. We split it + * up using a number of environment variables instead. */ + + compat = of_get_property(ofdev->node, "compatible", &cplen); + while (compat && *compat && cplen > 0) { + if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat)) + return -ENOMEM; + + sl = strlen(compat) + 1; + compat += sl; + cplen -= sl; + seen++; + } + + if (add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen)) + return -ENOMEM; + + /* modalias is trickier, we add it in 2 steps */ + if (add_uevent_var(env, "MODALIAS=")) + return -ENOMEM; + sl = of_device_get_modalias(ofdev, &env->buf[env->buflen-1], + sizeof(env->buf) - env->buflen); + if (sl >= (sizeof(env->buf) - env->buflen)) + return -ENOMEM; + env->buflen += sl; + + return 0; +} +EXPORT_SYMBOL(of_device_uevent); diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c new file mode 100644 index 0000000..acf4574 --- /dev/null +++ b/arch/microblaze/kernel/of_platform.c @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * + * and Arnd Bergmann, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +struct bus_type of_platform_bus_type = { + .uevent = of_device_uevent, +}; +EXPORT_SYMBOL(of_platform_bus_type); + +static int __init of_bus_driver_init(void) +{ + return of_bus_type_init(&of_platform_bus_type, "of_platform"); +} +postcore_initcall(of_bus_driver_init); + +struct of_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent) +{ + struct of_device *dev; + + dev = of_device_alloc(np, bus_id, parent); + if (!dev) + return NULL; + + dev->dma_mask = 0xffffffffUL; + dev->dev.bus = &of_platform_bus_type; + + /* We do not fill the DMA ops for platform devices by default. + * This is currently the responsibility of the platform code + * to do such, possibly using a device notifier + */ + + if (of_device_register(dev) != 0) { + of_device_free(dev); + return NULL; + } + + return dev; +} +EXPORT_SYMBOL(of_platform_device_create); + +/** + * of_platform_bus_create - Create an OF device for a bus node and all its + * children. Optionally recursively instanciate matching busses. + * @bus: device node of the bus to instanciate + * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to + * disallow recursive creation of child busses + */ +static int of_platform_bus_create(const struct device_node *bus, + const struct of_device_id *matches, + struct device *parent) +{ + struct device_node *child; + struct of_device *dev; + int rc = 0; + + for_each_child_of_node(bus, child) { + pr_debug(" create child: %s\n", child->full_name); + dev = of_platform_device_create(child, NULL, parent); + if (dev == NULL) + rc = -ENOMEM; + else if (!of_match_node(matches, child)) + continue; + if (rc == 0) { + pr_debug(" and sub busses\n"); + rc = of_platform_bus_create(child, matches, &dev->dev); + } + if (rc) { + of_node_put(child); + break; + } + } + return rc; +} + + +/** + * of_platform_bus_probe - Probe the device-tree for platform busses + * @root: parent of the first level to probe or NULL for the root of the tree + * @matches: match table, NULL to use the default + * @parent: parent to hook devices from, NULL for toplevel + * + * Note that children of the provided root are not instanciated as devices + * unless the specified root itself matches the bus list and is not NULL. + */ + +int of_platform_bus_probe(struct device_node *root, + const struct of_device_id *matches, + struct device *parent) +{ + struct device_node *child; + struct of_device *dev; + int rc = 0; + + if (matches == NULL) + matches = of_default_bus_ids; + if (matches == OF_NO_DEEP_PROBE) + return -EINVAL; + if (root == NULL) + root = of_find_node_by_path("/"); + else + of_node_get(root); + + pr_debug("of_platform_bus_probe()\n"); + pr_debug(" starting at: %s\n", root->full_name); + + /* Do a self check of bus type, if there's a match, create + * children + */ + if (of_match_node(matches, root)) { + pr_debug(" root match, create all sub devices\n"); + dev = of_platform_device_create(root, NULL, parent); + if (dev == NULL) { + rc = -ENOMEM; + goto bail; + } + pr_debug(" create all sub busses\n"); + rc = of_platform_bus_create(root, matches, &dev->dev); + goto bail; + } + for_each_child_of_node(root, child) { + if (!of_match_node(matches, child)) + continue; + + pr_debug(" match: %s\n", child->full_name); + dev = of_platform_device_create(child, NULL, parent); + if (dev == NULL) + rc = -ENOMEM; + else + rc = of_platform_bus_create(child, matches, &dev->dev); + if (rc) { + of_node_put(child); + break; + } + } + bail: + of_node_put(root); + return rc; +} +EXPORT_SYMBOL(of_platform_bus_probe); + +static int of_dev_node_match(struct device *dev, void *data) +{ + return to_of_device(dev)->node == data; +} + +struct of_device *of_find_device_by_node(struct device_node *np) +{ + struct device *dev; + + dev = bus_find_device(&of_platform_bus_type, + NULL, np, of_dev_node_match); + if (dev) + return to_of_device(dev); + return NULL; +} +EXPORT_SYMBOL(of_find_device_by_node); + +static int of_dev_phandle_match(struct device *dev, void *data) +{ + phandle *ph = data; + return to_of_device(dev)->node->linux_phandle == *ph; +} + +struct of_device *of_find_device_by_phandle(phandle ph) +{ + struct device *dev; + + dev = bus_find_device(&of_platform_bus_type, + NULL, &ph, of_dev_phandle_match); + if (dev) + return to_of_device(dev); + return NULL; +} +EXPORT_SYMBOL(of_find_device_by_phandle); diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c new file mode 100644 index 0000000..475b1fa --- /dev/null +++ b/arch/microblaze/kernel/prom.c @@ -0,0 +1,1147 @@ +/* + * Procedures for creating, accessing and interpreting the device tree. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. + * {engebret|bergner}@us.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int __initdata dt_root_addr_cells; +static int __initdata dt_root_size_cells; + +typedef u32 cell_t; + +static struct boot_param_header *initial_boot_params; + +/* export that to outside world */ +struct device_node *of_chosen; + +static inline char *find_flat_dt_string(u32 offset) +{ + return ((char *)initial_boot_params) + + initial_boot_params->off_dt_strings + offset; +} + +/** + * This function is used to scan the flattened device-tree, it is + * used to extract the memory informations at boot before we can + * unflatten the tree + */ +int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data) +{ + unsigned long p = ((unsigned long)initial_boot_params) + + initial_boot_params->off_dt_struct; + int rc = 0; + int depth = -1; + + do { + u32 tag = *((u32 *)p); + char *pathp; + + p += 4; + if (tag == OF_DT_END_NODE) { + depth--; + continue; + } + if (tag == OF_DT_NOP) + continue; + if (tag == OF_DT_END) + break; + if (tag == OF_DT_PROP) { + u32 sz = *((u32 *)p); + p += 8; + if (initial_boot_params->version < 0x10) + p = _ALIGN(p, sz >= 8 ? 8 : 4); + p += sz; + p = _ALIGN(p, 4); + continue; + } + if (tag != OF_DT_BEGIN_NODE) { + printk(KERN_WARNING "Invalid tag %x scanning flattened" + " device tree !\n", tag); + return -EINVAL; + } + depth++; + pathp = (char *)p; + p = _ALIGN(p + strlen(pathp) + 1, 4); + if ((*pathp) == '/') { + char *lp, *np; + for (lp = NULL, np = pathp; *np; np++) + if ((*np) == '/') + lp = np+1; + if (lp != NULL) + pathp = lp; + } + rc = it(p, pathp, depth, data); + if (rc != 0) + break; + } while (1); + + return rc; +} + +unsigned long __init of_get_flat_dt_root(void) +{ + unsigned long p = ((unsigned long)initial_boot_params) + + initial_boot_params->off_dt_struct; + + while (*((u32 *)p) == OF_DT_NOP) + p += 4; + BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE); + p += 4; + return _ALIGN(p + strlen((char *)p) + 1, 4); +} + +/** + * This function can be used within scan_flattened_dt callback to get + * access to properties + */ +void *__init of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size) +{ + unsigned long p = node; + + do { + u32 tag = *((u32 *)p); + u32 sz, noff; + const char *nstr; + + p += 4; + if (tag == OF_DT_NOP) + continue; + if (tag != OF_DT_PROP) + return NULL; + + sz = *((u32 *)p); + noff = *((u32 *)(p + 4)); + p += 8; + if (initial_boot_params->version < 0x10) + p = _ALIGN(p, sz >= 8 ? 8 : 4); + + nstr = find_flat_dt_string(noff); + if (nstr == NULL) { + printk(KERN_WARNING "Can't find property index" + " name !\n"); + return NULL; + } + if (strcmp(name, nstr) == 0) { + if (size) + *size = sz; + return (void *)p; + } + p += sz; + p = _ALIGN(p, 4); + } while (1); +} + +int __init of_flat_dt_is_compatible(unsigned long node, const char *compat) +{ + const char *cp; + unsigned long cplen, l; + + cp = of_get_flat_dt_prop(node, "compatible", &cplen); + if (cp == NULL) + return 0; + while (cplen > 0) { + if (strncasecmp(cp, compat, strlen(compat)) == 0) + return 1; + l = strlen(cp) + 1; + cp += l; + cplen -= l; + } + + return 0; +} + +static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, + unsigned long align) +{ + void *res; + + *mem = _ALIGN(*mem, align); + res = (void *)*mem; + *mem += size; + + return res; +} + +static unsigned long __init unflatten_dt_node(unsigned long mem, + unsigned long *p, + struct device_node *dad, + struct device_node ***allnextpp, + unsigned long fpsize) +{ + struct device_node *np; + struct property *pp, **prev_pp = NULL; + char *pathp; + u32 tag; + unsigned int l, allocl; + int has_name = 0; + int new_format = 0; + + tag = *((u32 *)(*p)); + if (tag != OF_DT_BEGIN_NODE) { + printk("Weird tag at start of node: %x\n", tag); + return mem; + } + *p += 4; + pathp = (char *)*p; + l = allocl = strlen(pathp) + 1; + *p = _ALIGN(*p + l, 4); + + /* version 0x10 has a more compact unit name here instead of the full + * path. we accumulate the full path size using "fpsize", we'll rebuild + * it later. We detect this because the first character of the name is + * not '/'. + */ + if ((*pathp) != '/') { + new_format = 1; + if (fpsize == 0) { + /* root node: special case. fpsize accounts for path + * plus terminating zero. root node only has '/', so + * fpsize should be 2, but we want to avoid the first + * level nodes to have two '/' so we use fpsize 1 here + */ + fpsize = 1; + allocl = 2; + } else { + /* account for '/' and path size minus terminal 0 + * already in 'l' + */ + fpsize += l; + allocl = fpsize; + } + } + + np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, + __alignof__(struct device_node)); + if (allnextpp) { + memset(np, 0, sizeof(*np)); + np->full_name = ((char *)np) + sizeof(struct device_node); + if (new_format) { + char *p2 = np->full_name; + /* rebuild full path for new format */ + if (dad && dad->parent) { + strcpy(p2, dad->full_name); +#ifdef DEBUG + if ((strlen(p2) + l + 1) != allocl) { + pr_debug("%s: p: %d, l: %d, a: %d\n", + pathp, (int)strlen(p2), + l, allocl); + } +#endif + p2 += strlen(p2); + } + *(p2++) = '/'; + memcpy(p2, pathp, l); + } else + memcpy(np->full_name, pathp, l); + prev_pp = &np->properties; + **allnextpp = np; + *allnextpp = &np->allnext; + if (dad != NULL) { + np->parent = dad; + /* we temporarily use the next field as `last_child'*/ + if (dad->next == NULL) + dad->child = np; + else + dad->next->sibling = np; + dad->next = np; + } + kref_init(&np->kref); + } + while (1) { + u32 sz, noff; + char *pname; + + tag = *((u32 *)(*p)); + if (tag == OF_DT_NOP) { + *p += 4; + continue; + } + if (tag != OF_DT_PROP) + break; + *p += 4; + sz = *((u32 *)(*p)); + noff = *((u32 *)((*p) + 4)); + *p += 8; + if (initial_boot_params->version < 0x10) + *p = _ALIGN(*p, sz >= 8 ? 8 : 4); + + pname = find_flat_dt_string(noff); + if (pname == NULL) { + printk(KERN_INFO + "Can't find property name in list !\n"); + break; + } + if (strcmp(pname, "name") == 0) + has_name = 1; + l = strlen(pname) + 1; + pp = unflatten_dt_alloc(&mem, sizeof(struct property), + __alignof__(struct property)); + if (allnextpp) { + if (strcmp(pname, "linux,phandle") == 0) { + np->node = *((u32 *)*p); + if (np->linux_phandle == 0) + np->linux_phandle = np->node; + } + if (strcmp(pname, "ibm,phandle") == 0) + np->linux_phandle = *((u32 *)*p); + pp->name = pname; + pp->length = sz; + pp->value = (void *)*p; + *prev_pp = pp; + prev_pp = &pp->next; + } + *p = _ALIGN((*p) + sz, 4); + } + /* with version 0x10 we may not have the name property, recreate + * it here from the unit name if absent + */ + if (!has_name) { + char *p1 = pathp, *ps = pathp, *pa = NULL; + int sz; + + while (*p1) { + if ((*p1) == '@') + pa = p1; + if ((*p1) == '/') + ps = p1 + 1; + p1++; + } + if (pa < ps) + pa = p1; + sz = (pa - ps) + 1; + pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, + __alignof__(struct property)); + if (allnextpp) { + pp->name = "name"; + pp->length = sz; + pp->value = pp + 1; + *prev_pp = pp; + prev_pp = &pp->next; + memcpy(pp->value, ps, sz - 1); + ((char *)pp->value)[sz - 1] = 0; + pr_debug("fixed up name for %s -> %s\n", pathp, + (char *)pp->value); + } + } + if (allnextpp) { + *prev_pp = NULL; + np->name = of_get_property(np, "name", NULL); + np->type = of_get_property(np, "device_type", NULL); + + if (!np->name) + np->name = ""; + if (!np->type) + np->type = ""; + } + while (tag == OF_DT_BEGIN_NODE) { + mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); + tag = *((u32 *)(*p)); + } + if (tag != OF_DT_END_NODE) { + printk(KERN_INFO "Weird tag at end of node: %x\n", tag); + return mem; + } + *p += 4; + return mem; +} + +/** + * unflattens the device-tree passed by the firmware, creating the + * tree of struct device_node. It also fills the "name" and "type" + * pointers of the nodes so the normal device-tree walking functions + * can be used (this used to be done by finish_device_tree) + */ +void __init unflatten_device_tree(void) +{ + unsigned long start, mem, size; + struct device_node **allnextp = &allnodes; + + pr_debug(" -> unflatten_device_tree()\n"); + + /* First pass, scan for size */ + start = ((unsigned long)initial_boot_params) + + initial_boot_params->off_dt_struct; + size = unflatten_dt_node(0, &start, NULL, NULL, 0); + size = (size | 3) + 1; + + pr_debug(" size is %lx, allocating...\n", size); + + /* Allocate memory for the expanded device tree */ + mem = lmb_alloc(size + 4, __alignof__(struct device_node)); + mem = (unsigned long) __va(mem); + + ((u32 *)mem)[size / 4] = 0xdeadbeef; + + pr_debug(" unflattening %lx...\n", mem); + + /* Second pass, do actual unflattening */ + start = ((unsigned long)initial_boot_params) + + initial_boot_params->off_dt_struct; + unflatten_dt_node(mem, &start, NULL, &allnextp, 0); + if (*((u32 *)start) != OF_DT_END) + printk(KERN_WARNING "Weird tag at end of tree: %08x\n", + *((u32 *)start)); + if (((u32 *)mem)[size / 4] != 0xdeadbeef) + printk(KERN_WARNING "End of tree marker overwritten: %08x\n", + ((u32 *)mem)[size / 4]); + *allnextp = NULL; + + /* Get pointer to OF "/chosen" node for use everywhere */ + of_chosen = of_find_node_by_path("/chosen"); + if (of_chosen == NULL) + of_chosen = of_find_node_by_path("/chosen@0"); + + pr_debug(" <- unflatten_device_tree()\n"); +} + +#define early_init_dt_scan_drconf_memory(node) 0 + +static int __init early_init_dt_scan_cpus(unsigned long node, + const char *uname, int depth, + void *data) +{ + static int logical_cpuid; + char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const u32 *intserv; + int i, nthreads; + int found = 0; + + /* We are scanning "cpu" nodes only */ + if (type == NULL || strcmp(type, "cpu") != 0) + return 0; + + /* Get physical cpuid */ + intserv = of_get_flat_dt_prop(node, "reg", NULL); + nthreads = 1; + + /* + * Now see if any of these threads match our boot cpu. + * NOTE: This must match the parsing done in smp_setup_cpu_maps. + */ + for (i = 0; i < nthreads; i++) { + /* + * version 2 of the kexec param format adds the phys cpuid of + * booted proc. + */ + if (initial_boot_params && initial_boot_params->version >= 2) { + if (intserv[i] == + initial_boot_params->boot_cpuid_phys) { + found = 1; + break; + } + } else { + /* + * Check if it's the boot-cpu, set it's hw index now, + * unfortunately this format did not support booting + * off secondary threads. + */ + if (of_get_flat_dt_prop(node, + "linux,boot-cpu", NULL) != NULL) { + found = 1; + break; + } + } + +#ifdef CONFIG_SMP + /* logical cpu id is always 0 on UP kernels */ + logical_cpuid++; +#endif + } + + if (found) { + pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid, + intserv[i]); + boot_cpuid = logical_cpuid; + } + + return 0; +} + +#ifdef CONFIG_BLK_DEV_INITRD +static void __init early_init_dt_check_for_initrd(unsigned long node) +{ + unsigned long l; + u32 *prop; + + pr_debug("Looking for initrd properties... "); + + prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l); + if (prop) { + initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4)); + + prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l); + if (prop) { + initrd_end = (unsigned long) + __va(of_read_ulong(prop, l/4)); + initrd_below_start_ok = 1; + } else { + initrd_start = 0; + } + } + + pr_debug("initrd_start=0x%lx initrd_end=0x%lx\n", + initrd_start, initrd_end); +} +#else +static inline void early_init_dt_check_for_initrd(unsigned long node) +{ +} +#endif /* CONFIG_BLK_DEV_INITRD */ + +static int __init early_init_dt_scan_chosen(unsigned long node, + const char *uname, int depth, void *data) +{ + unsigned long l; + char *p; + + pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); + + if (depth != 1 || + (strcmp(uname, "chosen") != 0 && + strcmp(uname, "chosen@0") != 0)) + return 0; + +#ifdef CONFIG_KEXEC + lprop = (u64 *)of_get_flat_dt_prop(node, + "linux,crashkernel-base", NULL); + if (lprop) + crashk_res.start = *lprop; + + lprop = (u64 *)of_get_flat_dt_prop(node, + "linux,crashkernel-size", NULL); + if (lprop) + crashk_res.end = crashk_res.start + *lprop - 1; +#endif + + early_init_dt_check_for_initrd(node); + + /* Retreive command line */ + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) + strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); + +#ifdef CONFIG_CMDLINE + if (p == NULL || l == 0 || (l == 1 && (*p) == 0)) + strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); +#endif /* CONFIG_CMDLINE */ + + pr_debug("Command line is: %s\n", cmd_line); + + /* break now */ + return 1; +} + +static int __init early_init_dt_scan_root(unsigned long node, + const char *uname, int depth, void *data) +{ + u32 *prop; + + if (depth != 0) + return 0; + + prop = of_get_flat_dt_prop(node, "#size-cells", NULL); + dt_root_size_cells = (prop == NULL) ? 1 : *prop; + pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells); + + prop = of_get_flat_dt_prop(node, "#address-cells", NULL); + dt_root_addr_cells = (prop == NULL) ? 2 : *prop; + pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells); + + /* break now */ + return 1; +} + +static u64 __init dt_mem_next_cell(int s, cell_t **cellp) +{ + cell_t *p = *cellp; + + *cellp = p + s; + return of_read_number(p, s); +} + +static int __init early_init_dt_scan_memory(unsigned long node, + const char *uname, int depth, void *data) +{ + char *type = of_get_flat_dt_prop(node, "device_type", NULL); + cell_t *reg, *endp; + unsigned long l; + + /* Look for the ibm,dynamic-reconfiguration-memory node */ +/* if (depth == 1 && + strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) + return early_init_dt_scan_drconf_memory(node); +*/ + /* We are scanning "memory" nodes only */ + if (type == NULL) { + /* + * The longtrail doesn't have a device_type on the + * /memory node, so look for the node called /memory@0. + */ + if (depth != 1 || strcmp(uname, "memory@0") != 0) + return 0; + } else if (strcmp(type, "memory") != 0) + return 0; + + reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); + if (reg == NULL) + return 0; + + endp = reg + (l / sizeof(cell_t)); + + pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", + uname, l, reg[0], reg[1], reg[2], reg[3]); + + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { + u64 base, size; + + base = dt_mem_next_cell(dt_root_addr_cells, ®); + size = dt_mem_next_cell(dt_root_size_cells, ®); + + if (size == 0) + continue; + pr_debug(" - %llx , %llx\n", (unsigned long long)base, + (unsigned long long)size); + + lmb_add(base, size); + } + return 0; +} + +#ifdef CONFIG_PHYP_DUMP +/** + * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg + * + * Function to find the largest size we need to reserve + * during early boot process. + * + * It either looks for boot param and returns that OR + * returns larger of 256 or 5% rounded down to multiples of 256MB. + * + */ +static inline unsigned long phyp_dump_calculate_reserve_size(void) +{ + unsigned long tmp; + + if (phyp_dump_info->reserve_bootvar) + return phyp_dump_info->reserve_bootvar; + + /* divide by 20 to get 5% of value */ + tmp = lmb_end_of_DRAM(); + do_div(tmp, 20); + + /* round it down in multiples of 256 */ + tmp = tmp & ~0x0FFFFFFFUL; + + return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END); +} + +/** + * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory + * + * This routine may reserve memory regions in the kernel only + * if the system is supported and a dump was taken in last + * boot instance or if the hardware is supported and the + * scratch area needs to be setup. In other instances it returns + * without reserving anything. The memory in case of dump being + * active is freed when the dump is collected (by userland tools). + */ +static void __init phyp_dump_reserve_mem(void) +{ + unsigned long base, size; + unsigned long variable_reserve_size; + + if (!phyp_dump_info->phyp_dump_configured) { + printk(KERN_ERR "Phyp-dump not supported on this hardware\n"); + return; + } + + if (!phyp_dump_info->phyp_dump_at_boot) { + printk(KERN_INFO "Phyp-dump disabled at boot time\n"); + return; + } + + variable_reserve_size = phyp_dump_calculate_reserve_size(); + + if (phyp_dump_info->phyp_dump_is_active) { + /* Reserve *everything* above RMR.Area freed by userland tools*/ + base = variable_reserve_size; + size = lmb_end_of_DRAM() - base; + + /* XXX crashed_ram_end is wrong, since it may be beyond + * the memory_limit, it will need to be adjusted. */ + lmb_reserve(base, size); + + phyp_dump_info->init_reserve_start = base; + phyp_dump_info->init_reserve_size = size; + } else { + size = phyp_dump_info->cpu_state_size + + phyp_dump_info->hpte_region_size + + variable_reserve_size; + base = lmb_end_of_DRAM() - size; + lmb_reserve(base, size); + phyp_dump_info->init_reserve_start = base; + phyp_dump_info->init_reserve_size = size; + } +} +#else +static inline void __init phyp_dump_reserve_mem(void) {} +#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ + +#ifdef CONFIG_EARLY_PRINTK +/* MS this is Microblaze specifig function */ +static int __init early_init_dt_scan_serial(unsigned long node, + const char *uname, int depth, void *data) +{ + unsigned long l; + char *p; + int *addr; + + pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); + +/* find all serial nodes */ + if (strncmp(uname, "serial", 6) != 0) + return 0; + + early_init_dt_check_for_initrd(node); + +/* find compatible node with uartlite */ + p = of_get_flat_dt_prop(node, "compatible", &l); + if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) && + (strncmp(p, "xlnx,opb-uartlite", 17) != 0)) + return 0; + + addr = of_get_flat_dt_prop(node, "reg", &l); + return *addr; /* return address */ +} + +/* this function is looking for early uartlite console - Microblaze specific */ +int __init early_uartlite_console(void) +{ + return of_scan_flat_dt(early_init_dt_scan_serial, NULL); +} +#endif + +void __init early_init_devtree(void *params) +{ + pr_debug(" -> early_init_devtree(%p)\n", params); + + /* Setup flat device-tree pointer */ + initial_boot_params = params; + +#ifdef CONFIG_PHYP_DUMP + /* scan tree to see if dump occured during last boot */ + of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); +#endif + + /* Retrieve various informations from the /chosen node of the + * device-tree, including the platform type, initrd location and + * size, TCE reserve, and more ... + */ + of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + + /* Scan memory nodes and rebuild LMBs */ + lmb_init(); + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory, NULL); + + /* Save command line for /proc/cmdline and then parse parameters */ + strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); + parse_early_param(); + + lmb_analyze(); + + pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size()); + + pr_debug("Scanning CPUs ...\n"); + + /* Retreive CPU related informations from the flat tree + * (altivec support, boot CPU ID, ...) + */ + of_scan_flat_dt(early_init_dt_scan_cpus, NULL); + + pr_debug(" <- early_init_devtree()\n"); +} + +/** + * Indicates whether the root node has a given value in its + * compatible property. + */ +int machine_is_compatible(const char *compat) +{ + struct device_node *root; + int rc = 0; + + root = of_find_node_by_path("/"); + if (root) { + rc = of_device_is_compatible(root, compat); + of_node_put(root); + } + return rc; +} +EXPORT_SYMBOL(machine_is_compatible); + +/******* + * + * New implementation of the OF "find" APIs, return a refcounted + * object, call of_node_put() when done. The device tree and list + * are protected by a rw_lock. + * + * Note that property management will need some locking as well, + * this isn't dealt with yet. + * + *******/ + +/** + * of_find_node_by_phandle - Find a node given a phandle + * @handle: phandle of the node to find + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_node_by_phandle(phandle handle) +{ + struct device_node *np; + + read_lock(&devtree_lock); + for (np = allnodes; np != NULL; np = np->allnext) + if (np->linux_phandle == handle) + break; + of_node_get(np); + read_unlock(&devtree_lock); + return np; +} +EXPORT_SYMBOL(of_find_node_by_phandle); + +/** + * of_find_all_nodes - Get next node in global list + * @prev: Previous node or NULL to start iteration + * of_node_put() will be called on it + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_all_nodes(struct device_node *prev) +{ + struct device_node *np; + + read_lock(&devtree_lock); + np = prev ? prev->allnext : allnodes; + for (; np != NULL; np = np->allnext) + if (of_node_get(np)) + break; + of_node_put(prev); + read_unlock(&devtree_lock); + return np; +} +EXPORT_SYMBOL(of_find_all_nodes); + +/** + * of_node_get - Increment refcount of a node + * @node: Node to inc refcount, NULL is supported to + * simplify writing of callers + * + * Returns node. + */ +struct device_node *of_node_get(struct device_node *node) +{ + if (node) + kref_get(&node->kref); + return node; +} +EXPORT_SYMBOL(of_node_get); + +static inline struct device_node *kref_to_device_node(struct kref *kref) +{ + return container_of(kref, struct device_node, kref); +} + +/** + * of_node_release - release a dynamically allocated node + * @kref: kref element of the node to be released + * + * In of_node_put() this function is passed to kref_put() + * as the destructor. + */ +static void of_node_release(struct kref *kref) +{ + struct device_node *node = kref_to_device_node(kref); + struct property *prop = node->properties; + + /* We should never be releasing nodes that haven't been detached. */ + if (!of_node_check_flag(node, OF_DETACHED)) { + printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n", + node->full_name); + dump_stack(); + kref_init(&node->kref); + return; + } + + if (!of_node_check_flag(node, OF_DYNAMIC)) + return; + + while (prop) { + struct property *next = prop->next; + kfree(prop->name); + kfree(prop->value); + kfree(prop); + prop = next; + + if (!prop) { + prop = node->deadprops; + node->deadprops = NULL; + } + } + kfree(node->full_name); + kfree(node->data); + kfree(node); +} + +/** + * of_node_put - Decrement refcount of a node + * @node: Node to dec refcount, NULL is supported to + * simplify writing of callers + * + */ +void of_node_put(struct device_node *node) +{ + if (node) + kref_put(&node->kref, of_node_release); +} +EXPORT_SYMBOL(of_node_put); + +/* + * Plug a device node into the tree and global list. + */ +void of_attach_node(struct device_node *np) +{ + unsigned long flags; + + write_lock_irqsave(&devtree_lock, flags); + np->sibling = np->parent->child; + np->allnext = allnodes; + np->parent->child = np; + allnodes = np; + write_unlock_irqrestore(&devtree_lock, flags); +} + +/* + * "Unplug" a node from the device tree. The caller must hold + * a reference to the node. The memory associated with the node + * is not freed until its refcount goes to zero. + */ +void of_detach_node(struct device_node *np) +{ + struct device_node *parent; + unsigned long flags; + + write_lock_irqsave(&devtree_lock, flags); + + parent = np->parent; + if (!parent) + goto out_unlock; + + if (allnodes == np) + allnodes = np->allnext; + else { + struct device_node *prev; + for (prev = allnodes; + prev->allnext != np; + prev = prev->allnext) + ; + prev->allnext = np->allnext; + } + + if (parent->child == np) + parent->child = np->sibling; + else { + struct device_node *prevsib; + for (prevsib = np->parent->child; + prevsib->sibling != np; + prevsib = prevsib->sibling) + ; + prevsib->sibling = np->sibling; + } + + of_node_set_flag(np, OF_DETACHED); + +out_unlock: + write_unlock_irqrestore(&devtree_lock, flags); +} + +/* + * Add a property to a node + */ +int prom_add_property(struct device_node *np, struct property *prop) +{ + struct property **next; + unsigned long flags; + + prop->next = NULL; + write_lock_irqsave(&devtree_lock, flags); + next = &np->properties; + while (*next) { + if (strcmp(prop->name, (*next)->name) == 0) { + /* duplicate ! don't insert it */ + write_unlock_irqrestore(&devtree_lock, flags); + return -1; + } + next = &(*next)->next; + } + *next = prop; + write_unlock_irqrestore(&devtree_lock, flags); + +#ifdef CONFIG_PROC_DEVICETREE + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_add_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; +} + +/* + * Remove a property from a node. Note that we don't actually + * remove it, since we have given out who-knows-how-many pointers + * to the data using get-property. Instead we just move the property + * to the "dead properties" list, so it won't be found any more. + */ +int prom_remove_property(struct device_node *np, struct property *prop) +{ + struct property **next; + unsigned long flags; + int found = 0; + + write_lock_irqsave(&devtree_lock, flags); + next = &np->properties; + while (*next) { + if (*next == prop) { + /* found the node */ + *next = prop->next; + prop->next = np->deadprops; + np->deadprops = prop; + found = 1; + break; + } + next = &(*next)->next; + } + write_unlock_irqrestore(&devtree_lock, flags); + + if (!found) + return -ENODEV; + +#ifdef CONFIG_PROC_DEVICETREE + /* try to remove the proc node as well */ + if (np->pde) + proc_device_tree_remove_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; +} + +/* + * Update a property in a node. Note that we don't actually + * remove it, since we have given out who-knows-how-many pointers + * to the data using get-property. Instead we just move the property + * to the "dead properties" list, and add the new property to the + * property list + */ +int prom_update_property(struct device_node *np, + struct property *newprop, + struct property *oldprop) +{ + struct property **next; + unsigned long flags; + int found = 0; + + write_lock_irqsave(&devtree_lock, flags); + next = &np->properties; + while (*next) { + if (*next == oldprop) { + /* found the node */ + newprop->next = oldprop->next; + *next = newprop; + oldprop->next = np->deadprops; + np->deadprops = oldprop; + found = 1; + break; + } + next = &(*next)->next; + } + write_unlock_irqrestore(&devtree_lock, flags); + + if (!found) + return -ENODEV; + +#ifdef CONFIG_PROC_DEVICETREE + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_update_prop(np->pde, newprop, oldprop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; +} + +#if defined(CONFIG_DEBUG_FS) && defined(DEBUG) +static struct debugfs_blob_wrapper flat_dt_blob; + +static int __init export_flat_device_tree(void) +{ + struct dentry *d; + + flat_dt_blob.data = initial_boot_params; + flat_dt_blob.size = initial_boot_params->totalsize; + + d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, + of_debugfs_root, &flat_dt_blob); + if (!d) + return 1; + + return 0; +} +device_initcall(export_flat_device_tree); +#endif diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c new file mode 100644 index 0000000..ae0352e --- /dev/null +++ b/arch/microblaze/kernel/prom_parse.c @@ -0,0 +1,1025 @@ +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include + +#define PRu64 "%llx" + +/* Max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 +#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ + (ns) > 0) + +static struct of_bus *of_match_bus(struct device_node *np); +static int __of_address_to_resource(struct device_node *dev, + const u32 *addrp, u64 size, unsigned int flags, + struct resource *r); + +/* Debug utility */ +#ifdef DEBUG +static void of_dump_addr(const char *s, const u32 *addr, int na) +{ + printk(KERN_INFO "%s", s); + while (na--) + printk(KERN_INFO " %08x", *(addr++)); + printk(KERN_INFO "\n"); +} +#else +static void of_dump_addr(const char *s, const u32 *addr, int na) { } +#endif + +/* Callbacks for bus specific translators */ +struct of_bus { + const char *name; + const char *addresses; + int (*match)(struct device_node *parent); + void (*count_cells)(struct device_node *child, + int *addrc, int *sizec); + u64 (*map)(u32 *addr, const u32 *range, + int na, int ns, int pna); + int (*translate)(u32 *addr, u64 offset, int na); + unsigned int (*get_flags)(const u32 *addr); +}; + +/* + * Default translator (generic bus) + */ + +static void of_bus_default_count_cells(struct device_node *dev, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = of_n_addr_cells(dev); + if (sizec) + *sizec = of_n_size_cells(dev); +} + +static u64 of_bus_default_map(u32 *addr, const u32 *range, + int na, int ns, int pna) +{ + u64 cp, s, da; + + cp = of_read_number(range, na); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr, na); + + pr_debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n", + cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_default_translate(u32 *addr, u64 offset, int na) +{ + u64 a = of_read_number(addr, na); + memset(addr, 0, na * 4); + a += offset; + if (na > 1) + addr[na - 2] = a >> 32; + addr[na - 1] = a & 0xffffffffu; + + return 0; +} + +static unsigned int of_bus_default_get_flags(const u32 *addr) +{ + return IORESOURCE_MEM; +} + +#ifdef CONFIG_PCI +/* + * PCI bus specific translator + */ + +static int of_bus_pci_match(struct device_node *np) +{ + /* "vci" is for the /chaos bridge on 1st-gen PCI powermacs */ + return !strcmp(np->type, "pci") || !strcmp(np->type, "vci"); +} + +static void of_bus_pci_count_cells(struct device_node *np, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = 3; + if (sizec) + *sizec = 2; +} + +static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna) +{ + u64 cp, s, da; + + /* Check address type match */ + if ((addr[0] ^ range[0]) & 0x03000000) + return OF_BAD_ADDR; + + /* Read address values, skipping high cell */ + cp = of_read_number(range + 1, na - 1); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr + 1, na - 1); + + pr_debug("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_pci_translate(u32 *addr, u64 offset, int na) +{ + return of_bus_default_translate(addr + 1, offset, na - 1); +} + +static unsigned int of_bus_pci_get_flags(const u32 *addr) +{ + unsigned int flags = 0; + u32 w = addr[0]; + + switch ((w >> 24) & 0x03) { + case 0x01: + flags |= IORESOURCE_IO; + break; + case 0x02: /* 32 bits */ + case 0x03: /* 64 bits */ + flags |= IORESOURCE_MEM; + break; + } + if (w & 0x40000000) + flags |= IORESOURCE_PREFETCH; + return flags; +} + +const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, + unsigned int *flags) +{ + const u32 *prop; + unsigned int psize; + struct device_node *parent; + struct of_bus *bus; + int onesize, i, na, ns; + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + return NULL; + bus = of_match_bus(parent); + if (strcmp(bus->name, "pci")) { + of_node_put(parent); + return NULL; + } + bus->count_cells(dev, &na, &ns); + of_node_put(parent); + if (!OF_CHECK_COUNTS(na, ns)) + return NULL; + + /* Get "reg" or "assigned-addresses" property */ + prop = of_get_property(dev, bus->addresses, &psize); + if (prop == NULL) + return NULL; + psize /= 4; + + onesize = na + ns; + for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) + if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { + if (size) + *size = of_read_number(prop + na, ns); + if (flags) + *flags = bus->get_flags(prop); + return prop; + } + return NULL; +} +EXPORT_SYMBOL(of_get_pci_address); + +int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + const u32 *addrp; + u64 size; + unsigned int flags; + + addrp = of_get_pci_address(dev, bar, &size, &flags); + if (addrp == NULL) + return -EINVAL; + return __of_address_to_resource(dev, addrp, size, flags, r); +} +EXPORT_SYMBOL_GPL(of_pci_address_to_resource); + +static u8 of_irq_pci_swizzle(u8 slot, u8 pin) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + u32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard OF + * parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) + return of_irq_map_one(dn, 0, out_irq); + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { + struct pci_controller *host; + host = pci_bus_to_host(pdev->bus); + ppnode = host ? host->arch_data : NULL; + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't + * include the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec); + pdev = ppdev; + } + + laddr[0] = (pdev->bus->number << 16) + | (pdev->devfn << 8); + laddr[1] = laddr[2] = 0; + return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_map_pci); +#endif /* CONFIG_PCI */ + +/* + * ISA bus specific translator + */ + +static int of_bus_isa_match(struct device_node *np) +{ + return !strcmp(np->name, "isa"); +} + +static void of_bus_isa_count_cells(struct device_node *child, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = 2; + if (sizec) + *sizec = 1; +} + +static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna) +{ + u64 cp, s, da; + + /* Check address type match */ + if ((addr[0] ^ range[0]) & 0x00000001) + return OF_BAD_ADDR; + + /* Read address values, skipping high cell */ + cp = of_read_number(range + 1, na - 1); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr + 1, na - 1); + + pr_debug("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_isa_translate(u32 *addr, u64 offset, int na) +{ + return of_bus_default_translate(addr + 1, offset, na - 1); +} + +static unsigned int of_bus_isa_get_flags(const u32 *addr) +{ + unsigned int flags = 0; + u32 w = addr[0]; + + if (w & 1) + flags |= IORESOURCE_IO; + else + flags |= IORESOURCE_MEM; + return flags; +} + +/* + * Array of bus specific translators + */ + +static struct of_bus of_busses[] = { +#ifdef CONFIG_PCI + /* PCI */ + { + .name = "pci", + .addresses = "assigned-addresses", + .match = of_bus_pci_match, + .count_cells = of_bus_pci_count_cells, + .map = of_bus_pci_map, + .translate = of_bus_pci_translate, + .get_flags = of_bus_pci_get_flags, + }, +#endif /* CONFIG_PCI */ + /* ISA */ + { + .name = "isa", + .addresses = "reg", + .match = of_bus_isa_match, + .count_cells = of_bus_isa_count_cells, + .map = of_bus_isa_map, + .translate = of_bus_isa_translate, + .get_flags = of_bus_isa_get_flags, + }, + /* Default */ + { + .name = "default", + .addresses = "reg", + .match = NULL, + .count_cells = of_bus_default_count_cells, + .map = of_bus_default_map, + .translate = of_bus_default_translate, + .get_flags = of_bus_default_get_flags, + }, +}; + +static struct of_bus *of_match_bus(struct device_node *np) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(of_busses); i++) + if (!of_busses[i].match || of_busses[i].match(np)) + return &of_busses[i]; + BUG(); + return NULL; +} + +static int of_translate_one(struct device_node *parent, struct of_bus *bus, + struct of_bus *pbus, u32 *addr, + int na, int ns, int pna) +{ + const u32 *ranges; + unsigned int rlen; + int rone; + u64 offset = OF_BAD_ADDR; + + /* Normally, an absence of a "ranges" property means we are + * crossing a non-translatable boundary, and thus the addresses + * below the current not cannot be converted to CPU physical ones. + * Unfortunately, while this is very clear in the spec, it's not + * what Apple understood, and they do have things like /uni-n or + * /ht nodes with no "ranges" property and a lot of perfectly + * useable mapped devices below them. Thus we treat the absence of + * "ranges" as equivalent to an empty "ranges" property which means + * a 1:1 translation at that level. It's up to the caller not to try + * to translate addresses that aren't supposed to be translated in + * the first place. --BenH. + */ + ranges = of_get_property(parent, "ranges", (int *) &rlen); + if (ranges == NULL || rlen == 0) { + offset = of_read_number(addr, na); + memset(addr, 0, pna * 4); + pr_debug("OF: no ranges, 1:1 translation\n"); + goto finish; + } + + pr_debug("OF: walking ranges...\n"); + + /* Now walk through the ranges */ + rlen /= 4; + rone = na + pna + ns; + for (; rlen >= rone; rlen -= rone, ranges += rone) { + offset = bus->map(addr, ranges, na, ns, pna); + if (offset != OF_BAD_ADDR) + break; + } + if (offset == OF_BAD_ADDR) { + pr_debug("OF: not found !\n"); + return 1; + } + memcpy(addr, ranges + na, 4 * pna); + + finish: + of_dump_addr("OF: parent translation for:", addr, pna); + pr_debug("OF: with offset: "PRu64"\n", offset); + + /* Translate it into parent bus space */ + return pbus->translate(addr, offset, pna); +} + +/* + * Translate an address from the device-tree into a CPU physical address, + * this walks up the tree and applies the various bus mappings on the + * way. + * + * Note: We consider that crossing any level with #size-cells == 0 to mean + * that translation is impossible (that is we are not dealing with a value + * that can be mapped to a cpu physical address). This is not really specified + * that way, but this is traditionally the way IBM at least do things + */ +u64 of_translate_address(struct device_node *dev, const u32 *in_addr) +{ + struct device_node *parent = NULL; + struct of_bus *bus, *pbus; + u32 addr[OF_MAX_ADDR_CELLS]; + int na, ns, pna, pns; + u64 result = OF_BAD_ADDR; + + pr_debug("OF: ** translation for device %s **\n", dev->full_name); + + /* Increase refcount at current level */ + of_node_get(dev); + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + goto bail; + bus = of_match_bus(parent); + + /* Cound address cells & copy address locally */ + bus->count_cells(dev, &na, &ns); + if (!OF_CHECK_COUNTS(na, ns)) { + printk(KERN_ERR "prom_parse: Bad cell count for %s\n", + dev->full_name); + goto bail; + } + memcpy(addr, in_addr, na * 4); + + pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n", + bus->name, na, ns, parent->full_name); + of_dump_addr("OF: translating address:", addr, na); + + /* Translate */ + for (;;) { + /* Switch to parent bus */ + of_node_put(dev); + dev = parent; + parent = of_get_parent(dev); + + /* If root, we have finished */ + if (parent == NULL) { + pr_debug("OF: reached root node\n"); + result = of_read_number(addr, na); + break; + } + + /* Get new parent bus and counts */ + pbus = of_match_bus(parent); + pbus->count_cells(dev, &pna, &pns); + if (!OF_CHECK_COUNTS(pna, pns)) { + printk(KERN_ERR "prom_parse: Bad cell count for %s\n", + dev->full_name); + break; + } + + pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n", + pbus->name, pna, pns, parent->full_name); + + /* Apply bus translation */ + if (of_translate_one(dev, bus, pbus, addr, na, ns, pna)) + break; + + /* Complete the move up one level */ + na = pna; + ns = pns; + bus = pbus; + + of_dump_addr("OF: one level translation:", addr, na); + } + bail: + of_node_put(parent); + of_node_put(dev); + + return result; +} +EXPORT_SYMBOL(of_translate_address); + +const u32 *of_get_address(struct device_node *dev, int index, u64 *size, + unsigned int *flags) +{ + const u32 *prop; + unsigned int psize; + struct device_node *parent; + struct of_bus *bus; + int onesize, i, na, ns; + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + return NULL; + bus = of_match_bus(parent); + bus->count_cells(dev, &na, &ns); + of_node_put(parent); + if (!OF_CHECK_COUNTS(na, ns)) + return NULL; + + /* Get "reg" or "assigned-addresses" property */ + prop = of_get_property(dev, bus->addresses, (int *) &psize); + if (prop == NULL) + return NULL; + psize /= 4; + + onesize = na + ns; + for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) + if (i == index) { + if (size) + *size = of_read_number(prop + na, ns); + if (flags) + *flags = bus->get_flags(prop); + return prop; + } + return NULL; +} +EXPORT_SYMBOL(of_get_address); + +static int __of_address_to_resource(struct device_node *dev, const u32 *addrp, + u64 size, unsigned int flags, + struct resource *r) +{ + u64 taddr; + + if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0) + return -EINVAL; + taddr = of_translate_address(dev, addrp); + if (taddr == OF_BAD_ADDR) + return -EINVAL; + memset(r, 0, sizeof(struct resource)); + if (flags & IORESOURCE_IO) { + unsigned long port; + port = -1; /* pci_address_to_pio(taddr); */ + if (port == (unsigned long)-1) + return -EINVAL; + r->start = port; + r->end = port + size - 1; + } else { + r->start = taddr; + r->end = taddr + size - 1; + } + r->flags = flags; + r->name = dev->name; + return 0; +} + +int of_address_to_resource(struct device_node *dev, int index, + struct resource *r) +{ + const u32 *addrp; + u64 size; + unsigned int flags; + + addrp = of_get_address(dev, index, &size, &flags); + if (addrp == NULL) + return -EINVAL; + return __of_address_to_resource(dev, addrp, size, flags, r); +} +EXPORT_SYMBOL_GPL(of_address_to_resource); + +void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, + unsigned long *busno, unsigned long *phys, unsigned long *size) +{ + const u32 *dma_window; + u32 cells; + const unsigned char *prop; + + dma_window = dma_window_prop; + + /* busno is always one cell */ + *busno = *(dma_window++); + + prop = of_get_property(dn, "ibm,#dma-address-cells", NULL); + if (!prop) + prop = of_get_property(dn, "#address-cells", NULL); + + cells = prop ? *(u32 *)prop : of_n_addr_cells(dn); + *phys = of_read_number(dma_window, cells); + + dma_window += cells; + + prop = of_get_property(dn, "ibm,#dma-size-cells", NULL); + cells = prop ? *(u32 *)prop : of_n_size_cells(dn); + *size = of_read_number(dma_window, cells); +} + +/* + * Interrupt remapper + */ + +static unsigned int of_irq_workarounds; +static struct device_node *of_irq_dflt_pic; + +static struct device_node *of_irq_find_parent(struct device_node *child) +{ + struct device_node *p; + const phandle *parp; + + if (!of_node_get(child)) + return NULL; + + do { + parp = of_get_property(child, "interrupt-parent", NULL); + if (parp == NULL) + p = of_get_parent(child); + else { + if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) + p = of_node_get(of_irq_dflt_pic); + else + p = of_find_node_by_phandle(*parp); + } + of_node_put(child); + child = p; + } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL); + + return p; +} + +/* This doesn't need to be called if you don't have any special workaround + * flags to pass + */ +void of_irq_map_init(unsigned int flags) +{ + of_irq_workarounds = flags; + + /* OldWorld, don't bother looking at other things */ + if (flags & OF_IMAP_OLDWORLD_MAC) + return; + + /* If we don't have phandles, let's try to locate a default interrupt + * controller (happens when booting with BootX). We do a first match + * here, hopefully, that only ever happens on machines with one + * controller. + */ + if (flags & OF_IMAP_NO_PHANDLE) { + struct device_node *np; + + for (np = NULL; (np = of_find_all_nodes(np)) != NULL;) { + if (of_get_property(np, "interrupt-controller", NULL) + == NULL) + continue; + /* Skip /chosen/interrupt-controller */ + if (strcmp(np->name, "chosen") == 0) + continue; + /* It seems like at least one person on this planet + * wants to use BootX on a machine with an AppleKiwi + * controller which happens to pretend to be an + * interrupt controller too. + */ + if (strcmp(np->name, "AppleKiwi") == 0) + continue; + /* I think we found one ! */ + of_irq_dflt_pic = np; + break; + } + } + +} + +int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize, + const u32 *addr, struct of_irq *out_irq) +{ + struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; + const u32 *tmp, *imap, *imask; + u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; + int imaplen, match, i; + + pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...]," + "ointsize=%d\n", + parent->full_name, intspec[0], intspec[1], ointsize); + + ipar = of_node_get(parent); + + /* First get the #interrupt-cells property of the current cursor + * that tells us how to interpret the passed-in intspec. If there + * is none, we are nice and just walk up the tree + */ + do { + tmp = of_get_property(ipar, "#interrupt-cells", NULL); + if (tmp != NULL) { + intsize = *tmp; + break; + } + tnode = ipar; + ipar = of_irq_find_parent(ipar); + of_node_put(tnode); + } while (ipar); + if (ipar == NULL) { + pr_debug(" -> no parent found !\n"); + goto fail; + } + + pr_debug("of_irq_map_raw: ipar=%s, size=%d\n", + ipar->full_name, intsize); + + if (ointsize != intsize) + return -EINVAL; + + /* Look for this #address-cells. We have to implement the old linux + * trick of looking for the parent here as some device-trees rely on it + */ + old = of_node_get(ipar); + do { + tmp = of_get_property(old, "#address-cells", NULL); + tnode = of_get_parent(old); + of_node_put(old); + old = tnode; + } while (old && tmp == NULL); + of_node_put(old); + old = NULL; + addrsize = (tmp == NULL) ? 2 : *tmp; + + pr_debug(" -> addrsize=%d\n", addrsize); + + /* Now start the actual "proper" walk of the interrupt tree */ + while (ipar != NULL) { + /* Now check if cursor is an interrupt-controller and if it is + * then we are done + */ + if (of_get_property(ipar, "interrupt-controller", NULL) != + NULL) { + pr_debug(" -> got it !\n"); + memcpy(out_irq->specifier, intspec, + intsize * sizeof(u32)); + out_irq->size = intsize; + out_irq->controller = ipar; + of_node_put(old); + return 0; + } + + /* Now look for an interrupt-map */ + imap = of_get_property(ipar, "interrupt-map", &imaplen); + /* No interrupt map, check for an interrupt parent */ + if (imap == NULL) { + pr_debug(" -> no map, getting parent\n"); + newpar = of_irq_find_parent(ipar); + goto skiplevel; + } + imaplen /= sizeof(u32); + + /* Look for a mask */ + imask = of_get_property(ipar, "interrupt-map-mask", NULL); + + /* If we were passed no "reg" property and we attempt to parse + * an interrupt-map, then #address-cells must be 0. + * Fail if it's not. + */ + if (addr == NULL && addrsize != 0) { + pr_debug(" -> no reg passed in when needed !\n"); + goto fail; + } + + /* Parse interrupt-map */ + match = 0; + while (imaplen > (addrsize + intsize + 1) && !match) { + /* Compare specifiers */ + match = 1; + for (i = 0; i < addrsize && match; ++i) { + u32 mask = imask ? imask[i] : 0xffffffffu; + match = ((addr[i] ^ imap[i]) & mask) == 0; + } + for (; i < (addrsize + intsize) && match; ++i) { + u32 mask = imask ? imask[i] : 0xffffffffu; + match = + ((intspec[i-addrsize] ^ imap[i]) + & mask) == 0; + } + imap += addrsize + intsize; + imaplen -= addrsize + intsize; + + pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen); + + /* Get the interrupt parent */ + if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) + newpar = of_node_get(of_irq_dflt_pic); + else + newpar = + of_find_node_by_phandle((phandle)*imap); + imap++; + --imaplen; + + /* Check if not found */ + if (newpar == NULL) { + pr_debug(" -> imap parent not found !\n"); + goto fail; + } + + /* Get #interrupt-cells and #address-cells of new + * parent + */ + tmp = of_get_property(newpar, "#interrupt-cells", NULL); + if (tmp == NULL) { + pr_debug(" -> parent lacks " + "#interrupt-cells!\n"); + goto fail; + } + newintsize = *tmp; + tmp = of_get_property(newpar, "#address-cells", NULL); + newaddrsize = (tmp == NULL) ? 0 : *tmp; + + pr_debug(" -> newintsize=%d, newaddrsize=%d\n", + newintsize, newaddrsize); + + /* Check for malformed properties */ + if (imaplen < (newaddrsize + newintsize)) + goto fail; + + imap += newaddrsize + newintsize; + imaplen -= newaddrsize + newintsize; + + pr_debug(" -> imaplen=%d\n", imaplen); + } + if (!match) + goto fail; + + of_node_put(old); + old = of_node_get(newpar); + addrsize = newaddrsize; + intsize = newintsize; + intspec = imap - intsize; + addr = intspec - addrsize; + +skiplevel: + /* Iterate again with new parent */ + pr_debug(" -> new parent: %s\n", + newpar ? newpar->full_name : "<>"); + of_node_put(ipar); + ipar = newpar; + newpar = NULL; + } +fail: + of_node_put(ipar); + of_node_put(old); + of_node_put(newpar); + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(of_irq_map_raw); + +int of_irq_map_one(struct device_node *device, + int index, struct of_irq *out_irq) +{ + struct device_node *p; + const u32 *intspec, *tmp, *addr; + u32 intsize, intlen; + int res; + + pr_debug("of_irq_map_one: dev=%s, index=%d\n", + device->full_name, index); + + /* Get the interrupts property */ + intspec = of_get_property(device, "interrupts", (int *) &intlen); + if (intspec == NULL) + return -EINVAL; + intlen /= sizeof(u32); + + pr_debug(" intspec=%d intlen=%d\n", *intspec, intlen); + + /* Get the reg property (if any) */ + addr = of_get_property(device, "reg", NULL); + + /* Look for the interrupt parent. */ + p = of_irq_find_parent(device); + if (p == NULL) + return -EINVAL; + + /* Get size of interrupt specifier */ + tmp = of_get_property(p, "#interrupt-cells", NULL); + if (tmp == NULL) { + of_node_put(p); + return -EINVAL; + } + intsize = *tmp; + + pr_debug(" intsize=%d intlen=%d\n", intsize, intlen); + + /* Check index */ + if ((index + 1) * intsize > intlen) + return -EINVAL; + + /* Get new specifier and map it */ + res = of_irq_map_raw(p, intspec + index * intsize, intsize, + addr, out_irq); + of_node_put(p); + return res; +} +EXPORT_SYMBOL_GPL(of_irq_map_one); + +/** + * Search the device tree for the best MAC address to use. 'mac-address' is + * checked first, because that is supposed to contain to "most recent" MAC + * address. If that isn't set, then 'local-mac-address' is checked next, + * because that is the default address. If that isn't set, then the obsolete + * 'address' is checked, just in case we're using an old device tree. + * + * Note that the 'address' property is supposed to contain a virtual address of + * the register set, but some DTS files have redefined that property to be the + * MAC address. + * + * All-zero MAC addresses are rejected, because those could be properties that + * exist in the device tree, but were not set by U-Boot. For example, the + * DTS could define 'mac-address' and 'local-mac-address', with zero MAC + * addresses. Some older U-Boots only initialized 'local-mac-address'. In + * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists + * but is all zeros. +*/ +const void *of_get_mac_address(struct device_node *np) +{ + struct property *pp; + + pp = of_find_property(np, "mac-address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + pp = of_find_property(np, "local-mac-address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + pp = of_find_property(np, "address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + return NULL; +} +EXPORT_SYMBOL(of_get_mac_address); + +int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) +{ + struct of_irq out_irq; + int irq; + int res; + + res = of_irq_map_one(dev, index, &out_irq); + + /* Get irq for the device */ + if (res) { + pr_debug("IRQ not found... code = %d", res); + return NO_IRQ; + } + /* Assuming single interrupt controller... */ + irq = out_irq.specifier[0]; + + pr_debug("IRQ found = %d", irq); + + /* Only dereference the resource if both the + * resource and the irq are valid. */ + if (r && irq != NO_IRQ) { + r->start = r->end = irq; + r->flags = IORESOURCE_IRQ; + } + + return irq; +} +EXPORT_SYMBOL_GPL(of_irq_to_resource); + +void __iomem *of_iomap(struct device_node *np, int index) +{ + struct resource res; + + if (of_address_to_resource(np, index, &res)) + return NULL; + + return ioremap(res.start, 1 + res.end - res.start); +} +EXPORT_SYMBOL(of_iomap); -- cgit v0.10.2 From 945ce1bc54e40aa0a659226b6e79a0bce065945f Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:12 +0100 Subject: microblaze_v8: Platform bus registration Reviewed-by: Ingo Molnar Reviewed-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/platform/platform.c b/arch/microblaze/platform/platform.c new file mode 100644 index 0000000..56e0234 --- /dev/null +++ b/arch/microblaze/platform/platform.c @@ -0,0 +1,31 @@ +/* + * Copyright 2008 Michal Simek + * + * based on virtex.c file + * + * Copyright 2007 Secret Lab Technologies Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include + +static struct of_device_id xilinx_of_bus_ids[] __initdata = { + { .compatible = "simple-bus", }, + { .compatible = "xlnx,plb-v46-1.00.a", }, + { .compatible = "xlnx,opb-v20-1.10.c", }, + { .compatible = "xlnx,opb-v20-1.10.b", }, + { .compatible = "xlnx,compound", }, + {} +}; + +static int __init microblaze_device_probe(void) +{ + of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); + return 0; +} +device_initcall(microblaze_device_probe); -- cgit v0.10.2 From c4df4bc155bbe18fb91800bb9d29499a4fb211ad Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:13 +0100 Subject: microblaze_v8: exception handling Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h new file mode 100644 index 0000000..4cdd215 --- /dev/null +++ b/arch/microblaze/include/asm/exceptions.h @@ -0,0 +1,96 @@ +/* + * Preliminary support for HW exception handing for Microblaze + * + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2008 PetaLogix + * Copyright (C) 2005 John Williams + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#ifndef _ASM_MICROBLAZE_EXCEPTIONS_H +#define _ASM_MICROBLAZE_EXCEPTIONS_H + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +/* Macros to enable and disable HW exceptions in the MSR */ +/* Define MSR enable bit for HW exceptions */ +#define HWEX_MSR_BIT (1 << 8) + +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR +#define __enable_hw_exceptions() \ + __asm__ __volatile__ (" msrset r0, %0; \ + nop;" \ + : \ + : "i" (HWEX_MSR_BIT) \ + : "memory") + +#define __disable_hw_exceptions() \ + __asm__ __volatile__ (" msrclr r0, %0; \ + nop;" \ + : \ + : "i" (HWEX_MSR_BIT) \ + : "memory") +#else /* !CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */ +#define __enable_hw_exceptions() \ + __asm__ __volatile__ (" \ + mfs r12, rmsr; \ + nop; \ + ori r12, r12, %0; \ + mts rmsr, r12; \ + nop;" \ + : \ + : "i" (HWEX_MSR_BIT) \ + : "memory", "r12") + +#define __disable_hw_exceptions() \ + __asm__ __volatile__ (" \ + mfs r12, rmsr; \ + nop; \ + andi r12, r12, ~%0; \ + mts rmsr, r12; \ + nop;" \ + : \ + : "i" (HWEX_MSR_BIT) \ + : "memory", "r12") +#endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */ + +asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, + int fsr, int addr); + +#if defined(CONFIG_XMON) +extern void xmon(struct pt_regs *regs); +extern int xmon_bpt(struct pt_regs *regs); +extern int xmon_sstep(struct pt_regs *regs); +extern int xmon_iabr_match(struct pt_regs *regs); +extern int xmon_dabr_match(struct pt_regs *regs); +extern void (*xmon_fault_handler)(struct pt_regs *regs); + +void (*debugger)(struct pt_regs *regs) = xmon; +int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt; +int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep; +int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match; +int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match; +void (*debugger_fault_handler)(struct pt_regs *regs); +#elif defined(CONFIG_KGDB) +void (*debugger)(struct pt_regs *regs); +int (*debugger_bpt)(struct pt_regs *regs); +int (*debugger_sstep)(struct pt_regs *regs); +int (*debugger_iabr_match)(struct pt_regs *regs); +int (*debugger_dabr_match)(struct pt_regs *regs); +void (*debugger_fault_handler)(struct pt_regs *regs); +#else +#define debugger(regs) do { } while (0) +#define debugger_bpt(regs) 0 +#define debugger_sstep(regs) 0 +#define debugger_iabr_match(regs) 0 +#define debugger_dabr_match(regs) 0 +#define debugger_fault_handler ((void (*)(struct pt_regs *))0) +#endif + +#endif /*__ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_MICROBLAZE_EXCEPTIONS_H */ diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c new file mode 100644 index 0000000..4a8a406 --- /dev/null +++ b/arch/microblaze/kernel/exceptions.c @@ -0,0 +1,124 @@ +/* + * HW exception handling + * + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +/* + * This file handles the architecture-dependent parts of hardware exceptions + */ + +#include +#include +#include +#include +#include + +#include +#include /* For KM CPU var */ +#include +#include +#include +#include + +#define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02 +#define MICROBLAZE_IBUS_EXCEPTION 0x03 +#define MICROBLAZE_DBUS_EXCEPTION 0x04 +#define MICROBLAZE_DIV_ZERO_EXCEPTION 0x05 +#define MICROBLAZE_FPU_EXCEPTION 0x06 +#define MICROBLAZE_PRIVILEG_EXCEPTION 0x07 + +static DEFINE_SPINLOCK(die_lock); + +void die(const char *str, struct pt_regs *fp, long err) +{ + console_verbose(); + spin_lock_irq(&die_lock); + printk(KERN_WARNING "Oops: %s, sig: %ld\n", str, err); + show_regs(fp); + spin_unlock_irq(&die_lock); + /* do_exit() should take care of panic'ing from an interrupt + * context so we don't handle it here + */ + do_exit(err); +} + +void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) +{ + siginfo_t info; + + if (kernel_mode(regs)) { + debugger(regs); + die("Exception in kernel mode", regs, signr); + } + info.si_signo = signr; + info.si_errno = 0; + info.si_code = code; + info.si_addr = (void __user *) addr; + force_sig_info(signr, &info, current); +} + +asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, + int fsr, int addr) +{ +#if 0 + printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n", + type, user_mode(regs) ? "user" : "kernel", fsr, + (unsigned int) regs->pc, (unsigned int) regs->esr); +#endif + + switch (type & 0x1F) { + case MICROBLAZE_ILL_OPCODE_EXCEPTION: + _exception(SIGILL, regs, ILL_ILLOPC, addr); + break; + case MICROBLAZE_IBUS_EXCEPTION: + if (user_mode(regs)) { + printk(KERN_WARNING "Instruction bus error exception in user mode.\n"); + _exception(SIGBUS, regs, BUS_ADRERR, addr); + return; + } + printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n"); + die("bus exception", regs, SIGBUS); + break; + case MICROBLAZE_DBUS_EXCEPTION: + if (user_mode(regs)) { + printk(KERN_WARNING "Data bus error exception in user mode.\n"); + _exception(SIGBUS, regs, BUS_ADRERR, addr); + return; + } + printk(KERN_WARNING "Data bus error exception in kernel mode.\n"); + die("bus exception", regs, SIGBUS); + break; + case MICROBLAZE_DIV_ZERO_EXCEPTION: + printk(KERN_WARNING "Divide by zero exception\n"); + _exception(SIGILL, regs, ILL_ILLOPC, addr); + break; + + case MICROBLAZE_FPU_EXCEPTION: + /* IEEE FP exception */ + /* I removed fsr variable and use code var for storing fsr */ + if (fsr & FSR_IO) + fsr = FPE_FLTINV; + else if (fsr & FSR_OF) + fsr = FPE_FLTOVF; + else if (fsr & FSR_UF) + fsr = FPE_FLTUND; + else if (fsr & FSR_DZ) + fsr = FPE_FLTDIV; + else if (fsr & FSR_DO) + fsr = FPE_FLTRES; + _exception(SIGFPE, regs, fsr, addr); + break; + + default: + printk(KERN_WARNING "Unexpected exception %02x " + "PC=%08x in %s mode\n", type, (unsigned int) addr, + kernel_mode(regs) ? "kernel" : "user"); + } + return; +} diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S new file mode 100644 index 0000000..cf9486d --- /dev/null +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -0,0 +1,458 @@ +/* + * Exception handling for Microblaze + * + * Rewriten interrupt handling + * + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * + * uClinux customisation (C) 2005 John Williams + * + * MMU code derived from arch/ppc/kernel/head_4xx.S: + * Copyright (C) 1995-1996 Gary Thomas + * Initial PowerPC version. + * Copyright (C) 1996 Cort Dougan + * Rewritten for PReP + * Copyright (C) 1996 Paul Mackerras + * Low-level exception handers, MMU support, and rewrite. + * Copyright (C) 1997 Dan Malek + * PowerPC 8xx modifications. + * Copyright (C) 1998-1999 TiVo, Inc. + * PowerPC 403GCX modifications. + * Copyright (C) 1999 Grant Erickson + * PowerPC 403GCX/405GP modifications. + * Copyright 2000 MontaVista Software Inc. + * PPC405 modifications + * PowerPC 403GCX/405GP modifications. + * Author: MontaVista Software, Inc. + * frank_rowand@mvista.com or source@mvista.com + * debbie_chu@mvista.com + * + * Original code + * Copyright (C) 2004 Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +/* + * Here are the handlers which don't require enabling translation + * and calling other kernel code thus we can keep their design very simple + * and do all processing in real mode. All what they need is a valid current + * (that is an issue for the CONFIG_REGISTER_TASK_PTR case) + * This handlers use r3,r4,r5,r6 and optionally r[current] to work therefore + * these registers are saved/restored + * The handlers which require translation are in entry.S --KAA + * + * Microblaze HW Exception Handler + * - Non self-modifying exception handler for the following exception conditions + * - Unalignment + * - Instruction bus error + * - Data bus error + * - Illegal instruction opcode + * - Divide-by-zero + * + * Note we disable interrupts during exception handling, otherwise we will + * possibly get multiple re-entrancy if interrupt handles themselves cause + * exceptions. JW + */ + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +/* Helpful Macros */ +#define EX_HANDLER_STACK_SIZ (4*19) +#define NUM_TO_REG(num) r ## num + +#define LWREG_NOP \ + bri ex_handler_unhandled; \ + nop; + +#define SWREG_NOP \ + bri ex_handler_unhandled; \ + nop; + +/* FIXME this is weird - for noMMU kernel is not possible to use brid + * instruction which can shorten executed time + */ + +/* r3 is the source */ +#define R3_TO_LWREG_V(regnum) \ + swi r3, r1, 4 * regnum; \ + bri ex_handler_done; + +/* r3 is the source */ +#define R3_TO_LWREG(regnum) \ + or NUM_TO_REG (regnum), r0, r3; \ + bri ex_handler_done; + +/* r3 is the target */ +#define SWREG_TO_R3_V(regnum) \ + lwi r3, r1, 4 * regnum; \ + bri ex_sw_tail; + +/* r3 is the target */ +#define SWREG_TO_R3(regnum) \ + or r3, r0, NUM_TO_REG (regnum); \ + bri ex_sw_tail; + +.extern other_exception_handler /* Defined in exception.c */ + +/* + * hw_exception_handler - Handler for exceptions + * + * Exception handler notes: + * - Handles all exceptions + * - Does not handle unaligned exceptions during load into r17, r1, r0. + * - Does not handle unaligned exceptions during store from r17 (cannot be + * done) and r1 (slows down common case) + * + * Relevant register structures + * + * EAR - |----|----|----|----|----|----|----|----| + * - < ## 32 bit faulting address ## > + * + * ESR - |----|----|----|----|----| - | - |-----|-----| + * - W S REG EXC + * + * + * STACK FRAME STRUCTURE (for NO_MMU) + * --------------------------------- + * + * +-------------+ + 0 + * | MSR | + * +-------------+ + 4 + * | r1 | + * | . | + * | . | + * | . | + * | . | + * | r18 | + * +-------------+ + 76 + * | . | + * | . | + * + * NO_MMU kernel use the same r0_ram pointed space - look to vmlinux.lds.S + * which is used for storing register values - old style was, that value were + * stored in stack but in case of failure you lost information about register. + * Currently you can see register value in memory in specific place. + * In compare to with previous solution the speed should be the same. + * + * MMU exception handler has different handling compare to no MMU kernel. + * Exception handler use jump table for directing of what happen. For MMU kernel + * is this approach better because MMU relate exception are handled by asm code + * in this file. In compare to with MMU expect of unaligned exception + * is everything handled by C code. + */ + +/* + * every of these handlers is entered having R3/4/5/6/11/current saved on stack + * and clobbered so care should be taken to restore them if someone is going to + * return from exception + */ + +/* wrappers to restore state before coming to entry.S */ + +.global _hw_exception_handler +.section .text +.align 4 +.ent _hw_exception_handler +_hw_exception_handler: + addik r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */ + swi r3, r1, PT_R3 + swi r4, r1, PT_R4 + swi r5, r1, PT_R5 + swi r6, r1, PT_R6 + + mfs r5, rmsr; + nop + swi r5, r1, 0; + mfs r4, rbtr /* Save BTR before jumping to handler */ + nop + mfs r3, resr + nop + + andi r5, r3, 0x1000; /* Check ESR[DS] */ + beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */ + mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ + nop +not_in_delay_slot: + swi r17, r1, PT_R17 + + andi r5, r3, 0x1F; /* Extract ESR[EXC] */ + + /* Exceptions enabled here. This will allow nested exceptions */ + mfs r6, rmsr; + nop + swi r6, r1, 0; /* RMSR_OFFSET */ + ori r6, r6, 0x100; /* Turn ON the EE bit */ + andi r6, r6, ~2; /* Disable interrupts */ + mts rmsr, r6; + nop + + xori r6, r5, 1; /* 00001 = Unaligned Exception */ + /* Jump to unalignment exception handler */ + beqi r6, handle_unaligned_ex; + +handle_other_ex: /* Handle Other exceptions here */ + /* Save other volatiles before we make procedure calls below */ + swi r7, r1, PT_R7 + swi r8, r1, PT_R8 + swi r9, r1, PT_R9 + swi r10, r1, PT_R10 + swi r11, r1, PT_R11 + swi r12, r1, PT_R12 + swi r14, r1, PT_R14 + swi r15, r1, PT_R15 + swi r18, r1, PT_R18 + + or r5, r1, r0 + andi r6, r3, 0x1F; /* Load ESR[EC] */ + lwi r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */ + swi r7, r1, PT_MODE + mfs r7, rfsr + nop + addk r8, r17, r0; /* Load exception address */ + bralid r15, full_exception; /* Branch to the handler */ + nop; + + /* + * Trigger execution of the signal handler by enabling + * interrupts and calling an invalid syscall. + */ + mfs r5, rmsr; + nop + ori r5, r5, 2; + mts rmsr, r5; /* enable interrupt */ + nop + addi r12, r0, __NR_syscalls; + brki r14, 0x08; + mfs r5, rmsr; /* disable interrupt */ + nop + andi r5, r5, ~2; + mts rmsr, r5; + nop + + lwi r7, r1, PT_R7 + lwi r8, r1, PT_R8 + lwi r9, r1, PT_R9 + lwi r10, r1, PT_R10 + lwi r11, r1, PT_R11 + lwi r12, r1, PT_R12 + lwi r14, r1, PT_R14 + lwi r15, r1, PT_R15 + lwi r18, r1, PT_R18 + + bri ex_handler_done; /* Complete exception handling */ + +/* 0x01 - Unaligned data access exception + * This occurs when a word access is not aligned on a word boundary, + * or when a 16-bit access is not aligned on a 16-bit boundary. + * This handler perform the access, and returns, except for MMU when + * the unaligned address is last on a 4k page or the physical address is + * not found in the page table, in which case unaligned_data_trap is called. + */ +handle_unaligned_ex: + /* Working registers already saved: R3, R4, R5, R6 + * R3 = ESR + * R4 = BTR + */ + mfs r4, rear; + nop + + andi r6, r3, 0x3E0; /* Mask and extract the register operand */ + srl r6, r6; /* r6 >> 5 */ + srl r6, r6; + srl r6, r6; + srl r6, r6; + srl r6, r6; + /* Store the register operand in a temporary location */ + sbi r6, r0, TOPHYS(ex_reg_op); + + andi r6, r3, 0x400; /* Extract ESR[S] */ + bnei r6, ex_sw; +ex_lw: + andi r6, r3, 0x800; /* Extract ESR[W] */ + beqi r6, ex_lhw; + lbui r5, r4, 0; /* Exception address in r4 */ + /* Load a word, byte-by-byte from destination address + and save it in tmp space */ + sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r5, r4, 1; + sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); + lbui r5, r4, 2; + sbi r5, r0, TOPHYS(ex_tmp_data_loc_2); + lbui r5, r4, 3; + sbi r5, r0, TOPHYS(ex_tmp_data_loc_3); + /* Get the destination register value into r3 */ + lwi r3, r0, TOPHYS(ex_tmp_data_loc_0); + bri ex_lw_tail; +ex_lhw: + lbui r5, r4, 0; /* Exception address in r4 */ + /* Load a half-word, byte-by-byte from destination + address and save it in tmp space */ + sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r5, r4, 1; + sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); + /* Get the destination register value into r3 */ + lhui r3, r0, TOPHYS(ex_tmp_data_loc_0); +ex_lw_tail: + /* Get the destination register number into r5 */ + lbui r5, r0, TOPHYS(ex_reg_op); + /* Form load_word jump table offset (lw_table + (8 * regnum)) */ + la r6, r0, TOPHYS(lw_table); + addk r5, r5, r5; + addk r5, r5, r5; + addk r5, r5, r5; + addk r5, r5, r6; + bra r5; +ex_lw_end: /* Exception handling of load word, ends */ +ex_sw: + /* Get the destination register number into r5 */ + lbui r5, r0, TOPHYS(ex_reg_op); + /* Form store_word jump table offset (sw_table + (8 * regnum)) */ + la r6, r0, TOPHYS(sw_table); + add r5, r5, r5; + add r5, r5, r5; + add r5, r5, r5; + add r5, r5, r6; + bra r5; +ex_sw_tail: + mfs r6, resr; + nop + andi r6, r6, 0x800; /* Extract ESR[W] */ + beqi r6, ex_shw; + /* Get the word - delay slot */ + swi r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Store the word, byte-by-byte into destination address */ + lbui r3, r0, TOPHYS(ex_tmp_data_loc_0); + sbi r3, r4, 0; + lbui r3, r0, TOPHYS(ex_tmp_data_loc_1); + sbi r3, r4, 1; + lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r3, r4, 2; + lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r3, r4, 3; + bri ex_handler_done; + +ex_shw: + /* Store the lower half-word, byte-by-byte into destination address */ + swi r3, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r3, r4, 0; + lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r3, r4, 1; +ex_sw_end: /* Exception handling of store word, ends. */ + +ex_handler_done: + lwi r5, r1, 0 /* RMSR */ + mts rmsr, r5 + nop + lwi r3, r1, PT_R3 + lwi r4, r1, PT_R4 + lwi r5, r1, PT_R5 + lwi r6, r1, PT_R6 + lwi r17, r1, PT_R17 + + rted r17, 0 + addik r1, r1, (EX_HANDLER_STACK_SIZ); /* Restore stack frame */ + +.end _hw_exception_handler + +ex_handler_unhandled: +/* FIXME add handle function for unhandled exception - dump register */ + bri 0 + +.section .text +.align 4 +lw_table: +lw_r0: R3_TO_LWREG (0); +lw_r1: LWREG_NOP; +lw_r2: R3_TO_LWREG (2); +lw_r3: R3_TO_LWREG_V (3); +lw_r4: R3_TO_LWREG_V (4); +lw_r5: R3_TO_LWREG_V (5); +lw_r6: R3_TO_LWREG_V (6); +lw_r7: R3_TO_LWREG (7); +lw_r8: R3_TO_LWREG (8); +lw_r9: R3_TO_LWREG (9); +lw_r10: R3_TO_LWREG (10); +lw_r11: R3_TO_LWREG (11); +lw_r12: R3_TO_LWREG (12); +lw_r13: R3_TO_LWREG (13); +lw_r14: R3_TO_LWREG (14); +lw_r15: R3_TO_LWREG (15); +lw_r16: R3_TO_LWREG (16); +lw_r17: LWREG_NOP; +lw_r18: R3_TO_LWREG (18); +lw_r19: R3_TO_LWREG (19); +lw_r20: R3_TO_LWREG (20); +lw_r21: R3_TO_LWREG (21); +lw_r22: R3_TO_LWREG (22); +lw_r23: R3_TO_LWREG (23); +lw_r24: R3_TO_LWREG (24); +lw_r25: R3_TO_LWREG (25); +lw_r26: R3_TO_LWREG (26); +lw_r27: R3_TO_LWREG (27); +lw_r28: R3_TO_LWREG (28); +lw_r29: R3_TO_LWREG (29); +lw_r30: R3_TO_LWREG (30); +lw_r31: R3_TO_LWREG (31); + +sw_table: +sw_r0: SWREG_TO_R3 (0); +sw_r1: SWREG_NOP; +sw_r2: SWREG_TO_R3 (2); +sw_r3: SWREG_TO_R3_V (3); +sw_r4: SWREG_TO_R3_V (4); +sw_r5: SWREG_TO_R3_V (5); +sw_r6: SWREG_TO_R3_V (6); +sw_r7: SWREG_TO_R3 (7); +sw_r8: SWREG_TO_R3 (8); +sw_r9: SWREG_TO_R3 (9); +sw_r10: SWREG_TO_R3 (10); +sw_r11: SWREG_TO_R3 (11); +sw_r12: SWREG_TO_R3 (12); +sw_r13: SWREG_TO_R3 (13); +sw_r14: SWREG_TO_R3 (14); +sw_r15: SWREG_TO_R3 (15); +sw_r16: SWREG_TO_R3 (16); +sw_r17: SWREG_NOP; +sw_r18: SWREG_TO_R3 (18); +sw_r19: SWREG_TO_R3 (19); +sw_r20: SWREG_TO_R3 (20); +sw_r21: SWREG_TO_R3 (21); +sw_r22: SWREG_TO_R3 (22); +sw_r23: SWREG_TO_R3 (23); +sw_r24: SWREG_TO_R3 (24); +sw_r25: SWREG_TO_R3 (25); +sw_r26: SWREG_TO_R3 (26); +sw_r27: SWREG_TO_R3 (27); +sw_r28: SWREG_TO_R3 (28); +sw_r29: SWREG_TO_R3 (29); +sw_r30: SWREG_TO_R3 (30); +sw_r31: SWREG_TO_R3 (31); + +/* Temporary data structures used in the handler */ +.section .data +.align 4 +ex_tmp_data_loc_0: + .byte 0 +ex_tmp_data_loc_1: + .byte 0 +ex_tmp_data_loc_2: + .byte 0 +ex_tmp_data_loc_3: + .byte 0 +ex_reg_op: + .byte 0 -- cgit v0.10.2 From 2148daa9c45ff4f91b5890f2a453e3130288064c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:14 +0100 Subject: microblaze_v8: Signal support Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h new file mode 100644 index 0000000..9676fad --- /dev/null +++ b/arch/microblaze/include/asm/signal.h @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * Yasushi SHOJI + * Tetsuya OHKAWA + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SIGNAL_H +#define _ASM_MICROBLAZE_SIGNAL_H + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +# ifndef __ASSEMBLY__ +# include +# include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +# ifdef __KERNEL__ +/* + * Most things should be clean enough to redefine this at will, if care + * is taken to make libc match. + */ +# define _NSIG 64 +# define _NSIG_BPW 32 +# define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +# include +# undef __HAVE_ARCH_SIG_BITOPS + +# define ptrace_signal_deliver(regs, cookie) do { } while (0) + +# else /* !__KERNEL__ */ + +/* Here we must cater to libcs that poke about in kernel headers. */ + +# define NSIG 32 +typedef unsigned long sigset_t; + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +# define sa_handler _u._sa_handler +# define sa_sigaction _u._sa_sigaction + +# endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +# endif /* __ASSEMBLY__ */ +#endif /* _ASM_MICROBLAZE_SIGNAL_H */ diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c new file mode 100644 index 0000000..ff347b9 --- /dev/null +++ b/arch/microblaze/kernel/signal.c @@ -0,0 +1,538 @@ +/* + * Signal handling + * + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * Copyright (C) 2003,2004 John Williams + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader + * Copyright (C) 1999,2000 Niibe Yutaka & Kaz Kojima + * Copyright (C) 1991,1992 Linus Torvalds + * + * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson + * + * This file was was derived from the sh version, arch/sh/kernel/signal.c + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall); + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ +asmlinkage int +sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs) +{ + sigset_t saveset; + + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->r3 = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(regs, &saveset, 1)) + return -EINTR; + } +} + +asmlinkage int +sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, + struct pt_regs *regs) +{ + sigset_t saveset, newset; + + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + sigdelsetmask(&newset, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + current->blocked = newset; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->r3 = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(regs, &saveset, 1)) + return -EINTR; + } +} + +asmlinkage int +sys_sigaction(int sig, const struct old_sigaction *act, + struct old_sigaction *oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + + if (act) { + old_sigset_t mask; + if (!access_ok(VERIFY_READ, act, sizeof(*act)) || + __get_user(new_ka.sa.sa_handler, &act->sa_handler) || + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + __get_user(new_ka.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return ret; +} + +asmlinkage int +sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, + struct pt_regs *regs) +{ + return do_sigaltstack(uss, uoss, regs->r1); +} + +/* + * Do a signal return; undo the signal stack. + */ + +struct sigframe { + struct sigcontext sc; + unsigned long extramask[_NSIG_WORDS-1]; + unsigned long tramp[2]; /* signal trampoline */ +}; + +struct rt_sigframe { + struct siginfo info; + struct ucontext uc; + unsigned long tramp[2]; /* signal trampoline */ +}; + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p) +{ + unsigned int err = 0; + +#define COPY(x) {err |= __get_user(regs->x, &sc->regs.x); } + COPY(r0); + COPY(r1); + COPY(r2); COPY(r3); COPY(r4); COPY(r5); + COPY(r6); COPY(r7); COPY(r8); COPY(r9); + COPY(r10); COPY(r11); COPY(r12); COPY(r13); + COPY(r14); COPY(r15); COPY(r16); COPY(r17); + COPY(r18); COPY(r19); COPY(r20); COPY(r21); + COPY(r22); COPY(r23); COPY(r24); COPY(r25); + COPY(r26); COPY(r27); COPY(r28); COPY(r29); + COPY(r30); COPY(r31); + COPY(pc); COPY(ear); COPY(esr); COPY(fsr); +#undef COPY + + *rval_p = regs->r3; + + return err; +} + +asmlinkage int sys_sigreturn(struct pt_regs *regs) +{ + struct sigframe *frame = (struct sigframe *)regs->r1; + sigset_t set; + int rval; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__get_user(set.sig[0], &frame->sc.oldmask) + || (_NSIG_WORDS > 1 + && __copy_from_user(&set.sig[1], &frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->sc, &rval)) + goto badframe; + return rval; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) +{ + struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1; + sigset_t set; + stack_t st; + int rval; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval)) + goto badframe; + + if (__copy_from_user((void *)&st, &frame->uc.uc_stack, sizeof(st))) + goto badframe; + /* It is more difficult to avoid calling this function than to + call it and ignore errors. */ + do_sigaltstack(&st, NULL, regs->r1); + + return rval; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* + * Set up a signal frame. + */ + +static int +setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, + unsigned long mask) +{ + int err = 0; + +#define COPY(x) {err |= __put_user(regs->x, &sc->regs.x); } + COPY(r0); + COPY(r1); + COPY(r2); COPY(r3); COPY(r4); COPY(r5); + COPY(r6); COPY(r7); COPY(r8); COPY(r9); + COPY(r10); COPY(r11); COPY(r12); COPY(r13); + COPY(r14); COPY(r15); COPY(r16); COPY(r17); + COPY(r18); COPY(r19); COPY(r20); COPY(r21); + COPY(r22); COPY(r23); COPY(r24); COPY(r25); + COPY(r26); COPY(r27); COPY(r28); COPY(r29); + COPY(r30); COPY(r31); + COPY(pc); COPY(ear); COPY(esr); COPY(fsr); +#undef COPY + + err |= __put_user(mask, &sc->oldmask); + + return err; +} + +/* + * Determine which stack to use.. + */ +static inline void * +get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) +{ + /* Default to using normal stack */ + unsigned long sp = regs->r1; + + if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && !on_sig_stack(sp)) + sp = current->sas_ss_sp + current->sas_ss_size; + + return (void *)((sp - frame_size) & -8UL); +} + +static void setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs *regs) +{ + struct sigframe *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); + + if (_NSIG_WORDS > 1) { + err |= __copy_to_user(frame->extramask, &set->sig[1], + sizeof(frame->extramask)); + } + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + /* minus 8 is offset to cater for "rtsd r15,8" offset */ + if (ka->sa.sa_flags & SA_RESTORER) { + regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8; + } else { + /* Note, these encodings are _big endian_! */ + + /* addi r12, r0, __NR_sigreturn */ + err |= __put_user(0x31800000 | __NR_sigreturn , + frame->tramp + 0); + /* brki r14, 0x8 */ + err |= __put_user(0xb9cc0008, frame->tramp + 1); + + /* Return from sighandler will jump to the tramp. + Negative 8 offset because return is rtsd r15, 8 */ + regs->r15 = ((unsigned long)frame->tramp)-8; + + __invalidate_cache_sigtramp((unsigned long)frame->tramp); + } + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + regs->r1 = (unsigned long) frame; + /* Signal handler args: */ + regs->r5 = signal; /* Arg 0: signum */ + regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */ + + /* Offset of 4 to handle microblaze rtid r14, 0 */ + regs->pc = (unsigned long)ka->sa.sa_handler; + + set_fs(USER_DS); + +#ifdef DEBUG_SIG + printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n", + current->comm, current->pid, frame, regs->pc); +#endif + + return; + +give_sigsegv: + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; + force_sig(SIGSEGV, current); +} + +static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= copy_siginfo_to_user(&frame->info, info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user((void *)current->sas_ss_sp, + &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->r1), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, + regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + /* minus 8 is offset to cater for "rtsd r15,8" */ + if (ka->sa.sa_flags & SA_RESTORER) { + regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8; + } else { + /* addi r12, r0, __NR_sigreturn */ + err |= __put_user(0x31800000 | __NR_rt_sigreturn , + frame->tramp + 0); + /* brki r14, 0x8 */ + err |= __put_user(0xb9cc0008, frame->tramp + 1); + + /* Return from sighandler will jump to the tramp. + Negative 8 offset because return is rtsd r15, 8 */ + regs->r15 = ((unsigned long)frame->tramp)-8; + + __invalidate_cache_sigtramp((unsigned long)frame->tramp); + } + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + regs->r1 = (unsigned long) frame; + /* Signal handler args: */ + regs->r5 = signal; /* arg 0: signum */ + regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */ + regs->r7 = (unsigned long) &frame->uc; /* arg2: ucontext */ + /* Offset to handle microblaze rtid r14, 0 */ + regs->pc = (unsigned long)ka->sa.sa_handler; + + set_fs(USER_DS); + +#ifdef DEBUG_SIG + printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n", + current->comm, current->pid, frame, regs->pc); +#endif + + return; + +give_sigsegv: + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; + force_sig(SIGSEGV, current); +} + +/* Handle restarting system calls */ +static inline void +handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) +{ + switch (regs->r3) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + if (!has_handler) + goto do_restart; + regs->r3 = -EINTR; + break; + case -ERESTARTSYS: + if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) { + regs->r3 = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: +do_restart: + /* offset of 4 bytes to re-execute trap (brki) instruction */ + regs->pc -= 4; + break; + } +} + +/* + * OK, we're invoking a handler + */ + +static void +handle_signal(unsigned long sig, struct k_sigaction *ka, + siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) +{ + /* Set up the stack frame */ + if (ka->sa.sa_flags & SA_SIGINFO) + setup_rt_frame(sig, ka, info, oldset, regs); + else + setup_frame(sig, ka, oldset, regs); + + if (ka->sa.sa_flags & SA_ONESHOT) + ka->sa.sa_handler = SIG_DFL; + + if (!(ka->sa.sa_flags & SA_NODEFER)) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, + ¤t->blocked, &ka->sa.sa_mask); + sigaddset(¤t->blocked, sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals that + * the kernel can handle, and then we build all the user-level signal handling + * stack-frames in one go after that. + */ +int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; +#ifdef DEBUG_SIG + printk(KERN_INFO "do signal: %p %p %d\n", regs, oldset, in_syscall); + printk(KERN_INFO "do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1, + regs->r12, current_thread_info()->flags); +#endif + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (kernel_mode(regs)) + return 1; + + if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + if (in_syscall) + handle_restart(regs, &ka, 1); + handle_signal(signr, &ka, &info, oldset, regs); + return 1; + } + + if (in_syscall) + handle_restart(regs, NULL, 0); + + /* Did we come from a system call? */ + return 0; +} -- cgit v0.10.2 From 37069abf2973f51aa12aa9dcb86c7403c9828161 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:15 +0100 Subject: microblaze_v8: Selfmodified code Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/selfmod.h b/arch/microblaze/include/asm/selfmod.h new file mode 100644 index 0000000..c42aff2 --- /dev/null +++ b/arch/microblaze/include/asm/selfmod.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2007-2008 Michal Simek + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SELFMOD_H +#define _ASM_MICROBLAZE_SELFMOD_H + +/* + * BARRIER_BASE_ADDR is constant address for selfmod function. + * do not change this value - selfmod function is in + * arch/microblaze/kernel/selfmod.c: selfmod_function() + * + * last 16 bits is used for storing register offset + */ + +#define BARRIER_BASE_ADDR 0x1234ff00 + +void selfmod_function(const int *arr_fce, const unsigned int base); + +#endif /* _ASM_MICROBLAZE_SELFMOD_H */ diff --git a/arch/microblaze/kernel/selfmod.c b/arch/microblaze/kernel/selfmod.c new file mode 100644 index 0000000..89508bd --- /dev/null +++ b/arch/microblaze/kernel/selfmod.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2009 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include + +#undef DEBUG + +#if __GNUC__ > 3 +#error GCC 4 unsupported SELFMOD. Please disable SELFMOD from menuconfig. +#endif + +#define OPCODE_IMM 0xB0000000 +#define OPCODE_LWI 0xE8000000 +#define OPCODE_LWI_MASK 0xEC000000 +#define OPCODE_RTSD 0xB60F0008 /* return from func: rtsd r15, 8 */ +#define OPCODE_ADDIK 0x30000000 +#define OPCODE_ADDIK_MASK 0xFC000000 + +#define IMM_BASE (OPCODE_IMM | (BARRIER_BASE_ADDR >> 16)) +#define LWI_BASE (OPCODE_LWI | (BARRIER_BASE_ADDR & 0x0000ff00)) +#define LWI_BASE_MASK (OPCODE_LWI_MASK | (BARRIER_BASE_ADDR & 0x0000ff00)) +#define ADDIK_BASE (OPCODE_ADDIK | (BARRIER_BASE_ADDR & 0x0000ff00)) +#define ADDIK_BASE_MASK (OPCODE_ADDIK_MASK | (BARRIER_BASE_ADDR & 0x0000ff00)) + +#define MODIFY_INSTR { \ + pr_debug("%s: curr instr, (%d):0x%x, next(%d):0x%x\n", \ + __func__, i, addr[i], i + 1, addr[i + 1]); \ + addr[i] = OPCODE_IMM + (base >> 16); \ + /* keep instruction opcode and add only last 16bits */ \ + addr[i + 1] = (addr[i + 1] & 0xffff00ff) + (base & 0xffff); \ + __invalidate_icache(addr[i]); \ + __invalidate_icache(addr[i + 1]); \ + pr_debug("%s: hack instr, (%d):0x%x, next(%d):0x%x\n", \ + __func__, i, addr[i], i + 1, addr[i + 1]); } + +/* NOTE + * self-modified part of code for improvement of interrupt controller + * save instruction in interrupt rutine + */ +void selfmod_function(const int *arr_fce, const unsigned int base) +{ + unsigned int flags, i, j, *addr = NULL; + + local_irq_save(flags); + __disable_icache(); + + /* zero terminated array */ + for (j = 0; arr_fce[j] != 0; j++) { + /* get start address of function */ + addr = (unsigned int *) arr_fce[j]; + pr_debug("%s: func(%d) at 0x%x\n", + __func__, j, (unsigned int) addr); + for (i = 0; ; i++) { + pr_debug("%s: instruction code at %d: 0x%x\n", + __func__, i, addr[i]); + if (addr[i] == IMM_BASE) { + /* detecting of lwi (0xE8) or swi (0xF8) instr + * I can detect both opcode with one mask */ + if ((addr[i + 1] & LWI_BASE_MASK) == LWI_BASE) { + MODIFY_INSTR; + } else /* detection addik for ack */ + if ((addr[i + 1] & ADDIK_BASE_MASK) == + ADDIK_BASE) { + MODIFY_INSTR; + } + } else if (addr[i] == OPCODE_RTSD) { + /* return from function means end of function */ + pr_debug("%s: end of array %d\n", __func__, i); + break; + } + } + } + local_irq_restore(flags); +} /* end of self-modified code */ -- cgit v0.10.2 From 8beb8503bfa305cd7d9efa590517a9c01e2f97b4 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:16 +0100 Subject: microblaze_v8: cache support Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h new file mode 100644 index 0000000..c4c64b4 --- /dev/null +++ b/arch/microblaze/include/asm/cache.h @@ -0,0 +1,45 @@ +/* + * Cache operations + * + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2003 John Williams + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#ifndef _ASM_MICROBLAZE_CACHE_H +#define _ASM_MICROBLAZE_CACHE_H + +#include + +#define L1_CACHE_SHIFT 2 +/* word-granular cache in microblaze */ +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +void _enable_icache(void); +void _disable_icache(void); +void _invalidate_icache(unsigned int addr); + +#define __enable_icache() _enable_icache() +#define __disable_icache() _disable_icache() +#define __invalidate_icache(addr) _invalidate_icache(addr) + +void _enable_dcache(void); +void _disable_dcache(void); +void _invalidate_dcache(unsigned int addr); + +#define __enable_dcache() _enable_dcache() +#define __disable_dcache() _disable_dcache() +#define __invalidate_dcache(addr) _invalidate_dcache(addr) + +/* FIXME - I don't think this is right */ +#ifdef CONFIG_XILINX_UNCACHED_SHADOW +#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE) +#endif + +#endif /* _ASM_MICROBLAZE_CACHE_H */ diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h new file mode 100644 index 0000000..3300b78 --- /dev/null +++ b/arch/microblaze/include/asm/cacheflush.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2007 PetaLogix + * Copyright (C) 2007 John Williams + * based on v850 version which was + * Copyright (C) 2001,02,03 NEC Electronics Corporation + * Copyright (C) 2001,02,03 Miles Bader + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + */ + +#ifndef _ASM_MICROBLAZE_CACHEFLUSH_H +#define _ASM_MICROBLAZE_CACHEFLUSH_H + +/* Somebody depends on this; sigh... */ +#include + +/* + * Cache handling functions. + * Microblaze has a write-through data cache, meaning that the data cache + * never needs to be flushed. The only flushing operations that are + * implemented are to invalidate the instruction cache. These are called + * after loading a user application into memory, we must invalidate the + * instruction cache to make sure we don't fetch old, bad code. + */ + +/* FIXME for LL-temac driver */ +#define invalidate_dcache_range(start, end) \ + __invalidate_dcache_range(start, end) + +#define flush_cache_all() __invalidate_cache_all() +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) __invalidate_cache_all() +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) + +#define flush_dcache_range(start, end) __invalidate_dcache_range(start, end) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +#define flush_icache_range(start, len) __invalidate_icache_range(start, len) +#define flush_icache_page(vma, pg) do { } while (0) + +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +struct page; +struct mm_struct; +struct vm_area_struct; + +/* see arch/microblaze/kernel/cache.c */ +extern void __invalidate_icache_all(void); +extern void __invalidate_icache_range(unsigned long start, unsigned long end); +extern void __invalidate_icache_page(struct vm_area_struct *vma, + struct page *page); +extern void __invalidate_icache_user_range(struct vm_area_struct *vma, + struct page *page, + unsigned long adr, int len); +extern void __invalidate_cache_sigtramp(unsigned long addr); + +extern void __invalidate_dcache_all(void); +extern void __invalidate_dcache_range(unsigned long start, unsigned long end); +extern void __invalidate_dcache_page(struct vm_area_struct *vma, + struct page *page); +extern void __invalidate_dcache_user_range(struct vm_area_struct *vma, + struct page *page, + unsigned long adr, int len); + +extern inline void __invalidate_cache_all(void) +{ + __invalidate_icache_all(); + __invalidate_dcache_all(); +} + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { memcpy((dst), (src), (len)); \ + flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \ +} while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy((dst), (src), (len)) + +#endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */ diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c new file mode 100644 index 0000000..be9fecc --- /dev/null +++ b/arch/microblaze/kernel/cpu/cache.c @@ -0,0 +1,258 @@ +/* + * Cache control for MicroBlaze cache memories + * + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#include +#include +#include + +/* Exported functions */ + +void _enable_icache(void) +{ + if (cpuinfo.use_icache) { +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR + __asm__ __volatile__ (" \ + msrset r0, %0; \ + nop; " \ + : \ + : "i" (MSR_ICE) \ + : "memory"); +#else + __asm__ __volatile__ (" \ + mfs r12, rmsr; \ + nop; \ + ori r12, r12, %0; \ + mts rmsr, r12; \ + nop; " \ + : \ + : "i" (MSR_ICE) \ + : "memory", "r12"); +#endif + } +} + +void _disable_icache(void) +{ + if (cpuinfo.use_icache) { +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR + __asm__ __volatile__ (" \ + msrclr r0, %0; \ + nop; " \ + : \ + : "i" (MSR_ICE) \ + : "memory"); +#else + __asm__ __volatile__ (" \ + mfs r12, rmsr; \ + nop; \ + andi r12, r12, ~%0; \ + mts rmsr, r12; \ + nop; " \ + : \ + : "i" (MSR_ICE) \ + : "memory", "r12"); +#endif + } +} + +void _invalidate_icache(unsigned int addr) +{ + if (cpuinfo.use_icache) { + __asm__ __volatile__ (" \ + wic %0, r0" \ + : \ + : "r" (addr)); + } +} + +void _enable_dcache(void) +{ + if (cpuinfo.use_dcache) { +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR + __asm__ __volatile__ (" \ + msrset r0, %0; \ + nop; " \ + : \ + : "i" (MSR_DCE) \ + : "memory"); +#else + __asm__ __volatile__ (" \ + mfs r12, rmsr; \ + nop; \ + ori r12, r12, %0; \ + mts rmsr, r12; \ + nop; " \ + : \ + : "i" (MSR_DCE) \ + : "memory", "r12"); +#endif + } +} + +void _disable_dcache(void) +{ + if (cpuinfo.use_dcache) { +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR + __asm__ __volatile__ (" \ + msrclr r0, %0; \ + nop; " \ + : \ + : "i" (MSR_DCE) \ + : "memory"); +#else + __asm__ __volatile__ (" \ + mfs r12, rmsr; \ + nop; \ + andi r12, r12, ~%0; \ + mts rmsr, r12; \ + nop; " \ + : \ + : "i" (MSR_DCE) \ + : "memory", "r12"); +#endif + } +} + +void _invalidate_dcache(unsigned int addr) +{ + if (cpuinfo.use_dcache) + __asm__ __volatile__ (" \ + wdc %0, r0" \ + : \ + : "r" (addr)); +} + +void __invalidate_icache_all(void) +{ + unsigned int i; + unsigned flags; + + if (cpuinfo.use_icache) { + local_irq_save(flags); + __disable_icache(); + + /* Just loop through cache size and invalidate, no need to add + CACHE_BASE address */ + for (i = 0; i < cpuinfo.icache_size; + i += cpuinfo.icache_line) + __invalidate_icache(i); + + __enable_icache(); + local_irq_restore(flags); + } +} + +void __invalidate_icache_range(unsigned long start, unsigned long end) +{ + unsigned int i; + unsigned flags; + unsigned int align; + + if (cpuinfo.use_icache) { + /* + * No need to cover entire cache range, + * just cover cache footprint + */ + end = min(start + cpuinfo.icache_size, end); + align = ~(cpuinfo.icache_line - 1); + start &= align; /* Make sure we are aligned */ + /* Push end up to the next cache line */ + end = ((end & align) + cpuinfo.icache_line); + + local_irq_save(flags); + __disable_icache(); + + for (i = start; i < end; i += cpuinfo.icache_line) + __invalidate_icache(i); + + __enable_icache(); + local_irq_restore(flags); + } +} + +void __invalidate_icache_page(struct vm_area_struct *vma, struct page *page) +{ + __invalidate_icache_all(); +} + +void __invalidate_icache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long adr, + int len) +{ + __invalidate_icache_all(); +} + +void __invalidate_cache_sigtramp(unsigned long addr) +{ + __invalidate_icache_range(addr, addr + 8); +} + +void __invalidate_dcache_all(void) +{ + unsigned int i; + unsigned flags; + + if (cpuinfo.use_dcache) { + local_irq_save(flags); + __disable_dcache(); + + /* + * Just loop through cache size and invalidate, + * no need to add CACHE_BASE address + */ + for (i = 0; i < cpuinfo.dcache_size; + i += cpuinfo.dcache_line) + __invalidate_dcache(i); + + __enable_dcache(); + local_irq_restore(flags); + } +} + +void __invalidate_dcache_range(unsigned long start, unsigned long end) +{ + unsigned int i; + unsigned flags; + unsigned int align; + + if (cpuinfo.use_dcache) { + /* + * No need to cover entire cache range, + * just cover cache footprint + */ + end = min(start + cpuinfo.dcache_size, end); + align = ~(cpuinfo.dcache_line - 1); + start &= align; /* Make sure we are aligned */ + /* Push end up to the next cache line */ + end = ((end & align) + cpuinfo.dcache_line); + local_irq_save(flags); + __disable_dcache(); + + for (i = start; i < end; i += cpuinfo.dcache_line) + __invalidate_dcache(i); + + __enable_dcache(); + local_irq_restore(flags); + } +} + +void __invalidate_dcache_page(struct vm_area_struct *vma, struct page *page) +{ + __invalidate_dcache_all(); +} + +void __invalidate_dcache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long adr, + int len) +{ + __invalidate_dcache_all(); +} -- cgit v0.10.2 From 7fbd3232082908e2a50c6776f4779b79085161fa Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:16 +0100 Subject: microblaze_v8: Generic dts file for platforms Reviewed-by: Ingo Molnar Reviewed-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/platform/generic/system.dts new file mode 100644 index 0000000..29993f6 --- /dev/null +++ b/arch/microblaze/platform/generic/system.dts @@ -0,0 +1,332 @@ +/* + * Device Tree Generator version: 1.1 + * + * (C) Copyright 2007-2008 Xilinx, Inc. + * (C) Copyright 2007-2009 Michal Simek + * + * Michal SIMEK + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6 + * + * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101 + */ + +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,microblaze"; + model = "testing"; + DDR2_SDRAM: memory@90000000 { + device_type = "memory"; + reg = < 0x90000000 0x10000000 >; + } ; + chosen { + bootargs = "console=ttyUL0,115200 highres=on"; + linux,stdout-path = "/plb@0/serial@84000000"; + } ; + cpus { + #address-cells = <1>; + #cpus = <0x1>; + #size-cells = <0>; + microblaze_0: cpu@0 { + clock-frequency = <125000000>; + compatible = "xlnx,microblaze-7.10.d"; + d-cache-baseaddr = <0x90000000>; + d-cache-highaddr = <0x9fffffff>; + d-cache-line-size = <0x10>; + d-cache-size = <0x2000>; + device_type = "cpu"; + i-cache-baseaddr = <0x90000000>; + i-cache-highaddr = <0x9fffffff>; + i-cache-line-size = <0x10>; + i-cache-size = <0x2000>; + model = "microblaze,7.10.d"; + reg = <0>; + timebase-frequency = <125000000>; + xlnx,addr-tag-bits = <0xf>; + xlnx,allow-dcache-wr = <0x1>; + xlnx,allow-icache-wr = <0x1>; + xlnx,area-optimized = <0x0>; + xlnx,cache-byte-size = <0x2000>; + xlnx,d-lmb = <0x1>; + xlnx,d-opb = <0x0>; + xlnx,d-plb = <0x1>; + xlnx,data-size = <0x20>; + xlnx,dcache-addr-tag = <0xf>; + xlnx,dcache-always-used = <0x1>; + xlnx,dcache-byte-size = <0x2000>; + xlnx,dcache-line-len = <0x4>; + xlnx,dcache-use-fsl = <0x1>; + xlnx,debug-enabled = <0x1>; + xlnx,div-zero-exception = <0x1>; + xlnx,dopb-bus-exception = <0x0>; + xlnx,dynamic-bus-sizing = <0x1>; + xlnx,edge-is-positive = <0x1>; + xlnx,family = "virtex5"; + xlnx,fpu-exception = <0x1>; + xlnx,fsl-data-size = <0x20>; + xlnx,fsl-exception = <0x0>; + xlnx,fsl-links = <0x0>; + xlnx,i-lmb = <0x1>; + xlnx,i-opb = <0x0>; + xlnx,i-plb = <0x1>; + xlnx,icache-always-used = <0x1>; + xlnx,icache-line-len = <0x4>; + xlnx,icache-use-fsl = <0x1>; + xlnx,ill-opcode-exception = <0x1>; + xlnx,instance = "microblaze_0"; + xlnx,interconnect = <0x1>; + xlnx,interrupt-is-edge = <0x0>; + xlnx,iopb-bus-exception = <0x0>; + xlnx,mmu-dtlb-size = <0x4>; + xlnx,mmu-itlb-size = <0x2>; + xlnx,mmu-tlb-access = <0x3>; + xlnx,mmu-zones = <0x10>; + xlnx,number-of-pc-brk = <0x1>; + xlnx,number-of-rd-addr-brk = <0x0>; + xlnx,number-of-wr-addr-brk = <0x0>; + xlnx,opcode-0x0-illegal = <0x1>; + xlnx,pvr = <0x2>; + xlnx,pvr-user1 = <0x0>; + xlnx,pvr-user2 = <0x0>; + xlnx,reset-msr = <0x0>; + xlnx,sco = <0x0>; + xlnx,unaligned-exceptions = <0x1>; + xlnx,use-barrel = <0x1>; + xlnx,use-dcache = <0x1>; + xlnx,use-div = <0x1>; + xlnx,use-ext-brk = <0x1>; + xlnx,use-ext-nm-brk = <0x1>; + xlnx,use-extended-fsl-instr = <0x0>; + xlnx,use-fpu = <0x2>; + xlnx,use-hw-mul = <0x2>; + xlnx,use-icache = <0x1>; + xlnx,use-interrupt = <0x1>; + xlnx,use-mmu = <0x3>; + xlnx,use-msr-instr = <0x1>; + xlnx,use-pcmp-instr = <0x1>; + } ; + } ; + mb_plb: plb@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; + ranges ; + FLASH: flash@a0000000 { + bank-width = <2>; + compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; + reg = < 0xa0000000 0x2000000 >; + xlnx,family = "virtex5"; + xlnx,include-datawidth-matching-0 = <0x1>; + xlnx,include-datawidth-matching-1 = <0x0>; + xlnx,include-datawidth-matching-2 = <0x0>; + xlnx,include-datawidth-matching-3 = <0x0>; + xlnx,include-negedge-ioregs = <0x0>; + xlnx,include-plb-ipif = <0x1>; + xlnx,include-wrbuf = <0x1>; + xlnx,max-mem-width = <0x10>; + xlnx,mch-native-dwidth = <0x20>; + xlnx,mch-plb-clk-period-ps = <0x1f40>; + xlnx,mch-splb-awidth = <0x20>; + xlnx,mch0-accessbuf-depth = <0x10>; + xlnx,mch0-protocol = <0x0>; + xlnx,mch0-rddatabuf-depth = <0x10>; + xlnx,mch1-accessbuf-depth = <0x10>; + xlnx,mch1-protocol = <0x0>; + xlnx,mch1-rddatabuf-depth = <0x10>; + xlnx,mch2-accessbuf-depth = <0x10>; + xlnx,mch2-protocol = <0x0>; + xlnx,mch2-rddatabuf-depth = <0x10>; + xlnx,mch3-accessbuf-depth = <0x10>; + xlnx,mch3-protocol = <0x0>; + xlnx,mch3-rddatabuf-depth = <0x10>; + xlnx,mem0-width = <0x10>; + xlnx,mem1-width = <0x20>; + xlnx,mem2-width = <0x20>; + xlnx,mem3-width = <0x20>; + xlnx,num-banks-mem = <0x1>; + xlnx,num-channels = <0x0>; + xlnx,priority-mode = <0x0>; + xlnx,synch-mem-0 = <0x0>; + xlnx,synch-mem-1 = <0x0>; + xlnx,synch-mem-2 = <0x0>; + xlnx,synch-mem-3 = <0x0>; + xlnx,synch-pipedelay-0 = <0x2>; + xlnx,synch-pipedelay-1 = <0x2>; + xlnx,synch-pipedelay-2 = <0x2>; + xlnx,synch-pipedelay-3 = <0x2>; + xlnx,tavdv-ps-mem-0 = <0x1adb0>; + xlnx,tavdv-ps-mem-1 = <0x3a98>; + xlnx,tavdv-ps-mem-2 = <0x3a98>; + xlnx,tavdv-ps-mem-3 = <0x3a98>; + xlnx,tcedv-ps-mem-0 = <0x1adb0>; + xlnx,tcedv-ps-mem-1 = <0x3a98>; + xlnx,tcedv-ps-mem-2 = <0x3a98>; + xlnx,tcedv-ps-mem-3 = <0x3a98>; + xlnx,thzce-ps-mem-0 = <0x88b8>; + xlnx,thzce-ps-mem-1 = <0x1b58>; + xlnx,thzce-ps-mem-2 = <0x1b58>; + xlnx,thzce-ps-mem-3 = <0x1b58>; + xlnx,thzoe-ps-mem-0 = <0x1b58>; + xlnx,thzoe-ps-mem-1 = <0x1b58>; + xlnx,thzoe-ps-mem-2 = <0x1b58>; + xlnx,thzoe-ps-mem-3 = <0x1b58>; + xlnx,tlzwe-ps-mem-0 = <0x88b8>; + xlnx,tlzwe-ps-mem-1 = <0x0>; + xlnx,tlzwe-ps-mem-2 = <0x0>; + xlnx,tlzwe-ps-mem-3 = <0x0>; + xlnx,twc-ps-mem-0 = <0x2af8>; + xlnx,twc-ps-mem-1 = <0x3a98>; + xlnx,twc-ps-mem-2 = <0x3a98>; + xlnx,twc-ps-mem-3 = <0x3a98>; + xlnx,twp-ps-mem-0 = <0x11170>; + xlnx,twp-ps-mem-1 = <0x2ee0>; + xlnx,twp-ps-mem-2 = <0x2ee0>; + xlnx,twp-ps-mem-3 = <0x2ee0>; + xlnx,xcl0-linesize = <0x4>; + xlnx,xcl0-writexfer = <0x1>; + xlnx,xcl1-linesize = <0x4>; + xlnx,xcl1-writexfer = <0x1>; + xlnx,xcl2-linesize = <0x4>; + xlnx,xcl2-writexfer = <0x1>; + xlnx,xcl3-linesize = <0x4>; + xlnx,xcl3-writexfer = <0x1>; + } ; + Hard_Ethernet_MAC: xps-ll-temac@81c00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; + ethernet@81c00000 { + compatible = "xlnx,xps-ll-temac-1.01.b"; + device_type = "network"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 5 2 >; + llink-connected = <&PIM3>; + local-mac-address = [ 02 00 00 00 00 00 ]; + reg = < 0x81c00000 0x40 >; + xlnx,bus2core-clk-ratio = <0x1>; + xlnx,phy-type = <0x1>; + xlnx,phyaddr = <0x1>; + xlnx,rxcsum = <0x0>; + xlnx,rxfifo = <0x1000>; + xlnx,temac-type = <0x0>; + xlnx,txcsum = <0x0>; + xlnx,txfifo = <0x1000>; + } ; + } ; + IIC_EEPROM: i2c@81600000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 6 2 >; + reg = < 0x81600000 0x10000 >; + xlnx,clk-freq = <0x7735940>; + xlnx,family = "virtex5"; + xlnx,gpo-width = <0x1>; + xlnx,iic-freq = <0x186a0>; + xlnx,scl-inertial-delay = <0x0>; + xlnx,sda-inertial-delay = <0x0>; + xlnx,ten-bit-adr = <0x0>; + } ; + LEDs_8Bit: gpio@81400000 { + compatible = "xlnx,xps-gpio-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 7 2 >; + reg = < 0x81400000 0x10000 >; + xlnx,all-inputs = <0x0>; + xlnx,all-inputs-2 = <0x0>; + xlnx,dout-default = <0x0>; + xlnx,dout-default-2 = <0x0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <0x8>; + xlnx,interrupt-present = <0x1>; + xlnx,is-bidir = <0x1>; + xlnx,is-bidir-2 = <0x1>; + xlnx,is-dual = <0x0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + } ; + RS232_Uart_1: serial@84000000 { + clock-frequency = <125000000>; + compatible = "xlnx,xps-uartlite-1.00.a"; + current-speed = <115200>; + device_type = "serial"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 8 0 >; + port-number = <0>; + reg = < 0x84000000 0x10000 >; + xlnx,baudrate = <0x1c200>; + xlnx,data-bits = <0x8>; + xlnx,family = "virtex5"; + xlnx,odd-parity = <0x0>; + xlnx,use-parity = <0x0>; + } ; + SysACE_CompactFlash: sysace@83600000 { + compatible = "xlnx,xps-sysace-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 4 2 >; + reg = < 0x83600000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,mem-width = <0x10>; + } ; + debug_module: debug@84400000 { + compatible = "xlnx,mdm-1.00.d"; + reg = < 0x84400000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,interconnect = <0x1>; + xlnx,jtag-chain = <0x2>; + xlnx,mb-dbg-ports = <0x1>; + xlnx,uart-width = <0x8>; + xlnx,use-uart = <0x1>; + xlnx,write-fsl-ports = <0x0>; + } ; + mpmc@90000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,mpmc-4.02.a"; + PIM3: sdma@84600180 { + compatible = "xlnx,ll-dma-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 2 2 1 2 >; + reg = < 0x84600180 0x80 >; + } ; + } ; + xps_intc_0: interrupt-controller@81800000 { + #interrupt-cells = <0x2>; + compatible = "xlnx,xps-intc-1.00.a"; + interrupt-controller ; + reg = < 0x81800000 0x10000 >; + xlnx,kind-of-intr = <0x100>; + xlnx,num-intr-inputs = <0x9>; + } ; + xps_timer_1: timer@83c00000 { + compatible = "xlnx,xps-timer-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 3 2 >; + reg = < 0x83c00000 0x10000 >; + xlnx,count-width = <0x20>; + xlnx,family = "virtex5"; + xlnx,gen0-assert = <0x1>; + xlnx,gen1-assert = <0x1>; + xlnx,one-timer-only = <0x0>; + xlnx,trig0-assert = <0x1>; + xlnx,trig1-assert = <0x1>; + } ; + } ; +} ; -- cgit v0.10.2 From f6b165c6ae540c607a9a62427f1b25bc5743c0aa Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:17 +0100 Subject: microblaze_v8: kernel modules support Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h new file mode 100644 index 0000000..914565a --- /dev/null +++ b/arch/microblaze/include/asm/module.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_MODULE_H +#define _ASM_MICROBLAZE_MODULE_H + +/* Microblaze Relocations */ +#define R_MICROBLAZE_NONE 0 +#define R_MICROBLAZE_32 1 +#define R_MICROBLAZE_32_PCREL 2 +#define R_MICROBLAZE_64_PCREL 3 +#define R_MICROBLAZE_32_PCREL_LO 4 +#define R_MICROBLAZE_64 5 +#define R_MICROBLAZE_32_LO 6 +#define R_MICROBLAZE_SRO32 7 +#define R_MICROBLAZE_SRW32 8 +#define R_MICROBLAZE_64_NONE 9 +#define R_MICROBLAZE_32_SYM_OP_SYM 10 +/* Keep this the last entry. */ +#define R_MICROBLAZE_NUM 11 + +struct mod_arch_specific { + int foo; +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +typedef struct { volatile int counter; } module_t; + +#endif /* _ASM_MICROBLAZE_MODULE_H */ diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c new file mode 100644 index 0000000..5f71790 --- /dev/null +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * libgcc functions - functions that are used internally by the + * compiler... (prototypes are not correct though, but that + * doesn't really matter since they're not versioned). + */ +extern void __ashldi3(void); +EXPORT_SYMBOL(__ashldi3); +extern void __ashrdi3(void); +EXPORT_SYMBOL(__ashrdi3); +extern void __divsi3(void); +EXPORT_SYMBOL(__divsi3); +extern void __lshrdi3(void); +EXPORT_SYMBOL(__lshrdi3); +extern void __modsi3(void); +EXPORT_SYMBOL(__modsi3); +extern void __mulsi3(void); +EXPORT_SYMBOL(__mulsi3); +extern void __muldi3(void); +EXPORT_SYMBOL(__muldi3); +extern void __ucmpdi2(void); +EXPORT_SYMBOL(__ucmpdi2); +extern void __udivsi3(void); +EXPORT_SYMBOL(__udivsi3); +extern void __umodsi3(void); +EXPORT_SYMBOL(__umodsi3); diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c new file mode 100644 index 0000000..5141417 --- /dev/null +++ b/arch/microblaze/kernel/module.c @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +void *module_alloc(unsigned long size) +{ + void *ret; + ret = (size == 0) ? NULL : vmalloc(size); + pr_debug("module_alloc (%08lx@%08lx)\n", size, (unsigned long int)ret); + return ret; +} + +void module_free(struct module *module, void *region) +{ + pr_debug("module_free(%s,%08lx)\n", module->name, + (unsigned long)region); + vfree(region); +} + +int module_frob_arch_sections(Elf_Ehdr *hdr, + Elf_Shdr *sechdrs, + char *secstrings, + struct module *mod) +{ + return 0; +} + +int apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, + unsigned int symindex, unsigned int relsec, struct module *module) +{ + printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n", + module->name); + return -ENOEXEC; +} + +int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, + unsigned int symindex, unsigned int relsec, struct module *module) +{ + + unsigned int i; + Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + unsigned long int *location; + unsigned long int locoffs; + unsigned long int value; +#if __GNUC__ < 4 + unsigned long int old_value; +#endif + + pr_debug("Applying add relocation section %u to %u\n", + relsec, sechdrs[relsec].sh_info); + + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { + + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rela[i].r_offset; + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rela[i].r_info); + value = sym->st_value + rela[i].r_addend; + + switch (ELF32_R_TYPE(rela[i].r_info)) { + + /* + * Be careful! mb-gcc / mb-ld splits the relocs between the + * text and the reloc table. In general this means we must + * read the current contents of (*location), add any offset + * then store the result back in + */ + + case R_MICROBLAZE_32: +#if __GNUC__ < 4 + old_value = *location; + *location = value + old_value; + + pr_debug("R_MICROBLAZE_32 (%08lx->%08lx)\n", + old_value, value); +#else + *location = value; +#endif + break; + + case R_MICROBLAZE_64: +#if __GNUC__ < 4 + /* Split relocs only required/used pre gcc4.1.1 */ + old_value = ((location[0] & 0x0000FFFF) << 16) | + (location[1] & 0x0000FFFF); + value += old_value; +#endif + location[0] = (location[0] & 0xFFFF0000) | + (value >> 16); + location[1] = (location[1] & 0xFFFF0000) | + (value & 0xFFFF); +#if __GNUC__ < 4 + pr_debug("R_MICROBLAZE_64 (%08lx->%08lx)\n", + old_value, value); +#endif + break; + + case R_MICROBLAZE_64_PCREL: + locoffs = (location[0] & 0xFFFF) << 16 | + (location[1] & 0xFFFF); + value -= (unsigned long int)(location) + 4 + + locoffs; + location[0] = (location[0] & 0xFFFF0000) | + (value >> 16); + location[1] = (location[1] & 0xFFFF0000) | + (value & 0xFFFF); + pr_debug("R_MICROBLAZE_64_PCREL (%08lx)\n", + value); + break; + + case R_MICROBLAZE_NONE: + pr_debug("R_MICROBLAZE_NONE\n"); + break; + + default: + printk(KERN_ERR "module %s: " + "Unknown relocation: %u\n", + module->name, + ELF32_R_TYPE(rela->r_info)); + return -ENOEXEC; + } + } + return 0; +} + +int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, + struct module *module) +{ + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ +} -- cgit v0.10.2 From 93139b1cf85924a3cc758c9a83b8c7b689987729 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:18 +0100 Subject: microblaze_v8: lmb include file Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/lmb.h b/arch/microblaze/include/asm/lmb.h new file mode 100644 index 0000000..a0a0a92 --- /dev/null +++ b/arch/microblaze/include/asm/lmb.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2008 Michal Simek + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_LMB_H +#define _ASM_MICROBLAZE_LMB_H + +/* LMB limit is OFF */ +#define LMB_REAL_LIMIT 0xFFFFFFFF + +#endif /* _ASM_MICROBLAZE_LMB_H */ + + -- cgit v0.10.2 From b0c62724a52a4f541bfe77c678a0229d7a7c6844 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:18 +0100 Subject: microblaze_v8: PVR support, cpuinfo support Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/pvr.h b/arch/microblaze/include/asm/pvr.h new file mode 100644 index 0000000..66f1b30 --- /dev/null +++ b/arch/microblaze/include/asm/pvr.h @@ -0,0 +1,209 @@ +/* + * Support for the MicroBlaze PVR (Processor Version Register) + * + * Copyright (C) 2009 Michal Simek + * Copyright (C) 2007 John Williams + * Copyright (C) 2007 - 2009 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#ifndef _ASM_MICROBLAZE_PVR_H +#define _ASM_MICROBLAZE_PVR_H + +#define PVR_MSR_BIT 0x400 + +struct pvr_s { + unsigned pvr[16]; +}; + +/* The following taken from Xilinx's standalone BSP pvr.h */ + +/* Basic PVR mask */ +#define PVR0_PVR_FULL_MASK 0x80000000 +#define PVR0_USE_BARREL_MASK 0x40000000 +#define PVR0_USE_DIV_MASK 0x20000000 +#define PVR0_USE_HW_MUL_MASK 0x10000000 +#define PVR0_USE_FPU_MASK 0x08000000 +#define PVR0_USE_EXC_MASK 0x04000000 +#define PVR0_USE_ICACHE_MASK 0x02000000 +#define PVR0_USE_DCACHE_MASK 0x01000000 +#define PVR0_USE_MMU 0x00800000 /* new */ +#define PVR0_VERSION_MASK 0x0000FF00 +#define PVR0_USER1_MASK 0x000000FF + +/* User 2 PVR mask */ +#define PVR1_USER2_MASK 0xFFFFFFFF + +/* Configuration PVR masks */ +#define PVR2_D_OPB_MASK 0x80000000 +#define PVR2_D_LMB_MASK 0x40000000 +#define PVR2_I_OPB_MASK 0x20000000 +#define PVR2_I_LMB_MASK 0x10000000 +#define PVR2_INTERRUPT_IS_EDGE_MASK 0x08000000 +#define PVR2_EDGE_IS_POSITIVE_MASK 0x04000000 +#define PVR2_D_PLB_MASK 0x02000000 /* new */ +#define PVR2_I_PLB_MASK 0x01000000 /* new */ +#define PVR2_INTERCONNECT 0x00800000 /* new */ +#define PVR2_USE_EXTEND_FSL 0x00080000 /* new */ +#define PVR2_USE_FSL_EXC 0x00040000 /* new */ +#define PVR2_USE_MSR_INSTR 0x00020000 +#define PVR2_USE_PCMP_INSTR 0x00010000 +#define PVR2_AREA_OPTIMISED 0x00008000 +#define PVR2_USE_BARREL_MASK 0x00004000 +#define PVR2_USE_DIV_MASK 0x00002000 +#define PVR2_USE_HW_MUL_MASK 0x00001000 +#define PVR2_USE_FPU_MASK 0x00000800 +#define PVR2_USE_MUL64_MASK 0x00000400 +#define PVR2_USE_FPU2_MASK 0x00000200 /* new */ +#define PVR2_USE_IPLBEXC 0x00000100 +#define PVR2_USE_DPLBEXC 0x00000080 +#define PVR2_OPCODE_0x0_ILL_MASK 0x00000040 +#define PVR2_UNALIGNED_EXC_MASK 0x00000020 +#define PVR2_ILL_OPCODE_EXC_MASK 0x00000010 +#define PVR2_IOPB_BUS_EXC_MASK 0x00000008 +#define PVR2_DOPB_BUS_EXC_MASK 0x00000004 +#define PVR2_DIV_ZERO_EXC_MASK 0x00000002 +#define PVR2_FPU_EXC_MASK 0x00000001 + +/* Debug and exception PVR masks */ +#define PVR3_DEBUG_ENABLED_MASK 0x80000000 +#define PVR3_NUMBER_OF_PC_BRK_MASK 0x1E000000 +#define PVR3_NUMBER_OF_RD_ADDR_BRK_MASK 0x00380000 +#define PVR3_NUMBER_OF_WR_ADDR_BRK_MASK 0x0000E000 +#define PVR3_FSL_LINKS_MASK 0x00000380 + +/* ICache config PVR masks */ +#define PVR4_USE_ICACHE_MASK 0x80000000 +#define PVR4_ICACHE_ADDR_TAG_BITS_MASK 0x7C000000 +#define PVR4_ICACHE_USE_FSL_MASK 0x02000000 +#define PVR4_ICACHE_ALLOW_WR_MASK 0x01000000 +#define PVR4_ICACHE_LINE_LEN_MASK 0x00E00000 +#define PVR4_ICACHE_BYTE_SIZE_MASK 0x001F0000 + +/* DCache config PVR masks */ +#define PVR5_USE_DCACHE_MASK 0x80000000 +#define PVR5_DCACHE_ADDR_TAG_BITS_MASK 0x7C000000 +#define PVR5_DCACHE_USE_FSL_MASK 0x02000000 +#define PVR5_DCACHE_ALLOW_WR_MASK 0x01000000 +#define PVR5_DCACHE_LINE_LEN_MASK 0x00E00000 +#define PVR5_DCACHE_BYTE_SIZE_MASK 0x001F0000 + +/* ICache base address PVR mask */ +#define PVR6_ICACHE_BASEADDR_MASK 0xFFFFFFFF + +/* ICache high address PVR mask */ +#define PVR7_ICACHE_HIGHADDR_MASK 0xFFFFFFFF + +/* DCache base address PVR mask */ +#define PVR8_DCACHE_BASEADDR_MASK 0xFFFFFFFF + +/* DCache high address PVR mask */ +#define PVR9_DCACHE_HIGHADDR_MASK 0xFFFFFFFF + +/* Target family PVR mask */ +#define PVR10_TARGET_FAMILY_MASK 0xFF000000 + +/* MMU descrtiption */ +#define PVR11_USE_MMU 0xC0000000 +#define PVR11_MMU_ITLB_SIZE 0x38000000 +#define PVR11_MMU_DTLB_SIZE 0x07000000 +#define PVR11_MMU_TLB_ACCESS 0x00C00000 +#define PVR11_MMU_ZONES 0x003C0000 +/* MSR Reset value PVR mask */ +#define PVR11_MSR_RESET_VALUE_MASK 0x000007FF + + +/* PVR access macros */ +#define PVR_IS_FULL(pvr) (pvr.pvr[0] & PVR0_PVR_FULL_MASK) +#define PVR_USE_BARREL(pvr) (pvr.pvr[0] & PVR0_USE_BARREL_MASK) +#define PVR_USE_DIV(pvr) (pvr.pvr[0] & PVR0_USE_DIV_MASK) +#define PVR_USE_HW_MUL(pvr) (pvr.pvr[0] & PVR0_USE_HW_MUL_MASK) +#define PVR_USE_FPU(pvr) (pvr.pvr[0] & PVR0_USE_FPU_MASK) +#define PVR_USE_FPU2(pvr) (pvr.pvr[2] & PVR2_USE_FPU2_MASK) +#define PVR_USE_ICACHE(pvr) (pvr.pvr[0] & PVR0_USE_ICACHE_MASK) +#define PVR_USE_DCACHE(pvr) (pvr.pvr[0] & PVR0_USE_DCACHE_MASK) +#define PVR_VERSION(pvr) ((pvr.pvr[0] & PVR0_VERSION_MASK) >> 8) +#define PVR_USER1(pvr) (pvr.pvr[0] & PVR0_USER1_MASK) +#define PVR_USER2(pvr) (pvr.pvr[1] & PVR1_USER2_MASK) + +#define PVR_D_OPB(pvr) (pvr.pvr[2] & PVR2_D_OPB_MASK) +#define PVR_D_LMB(pvr) (pvr.pvr[2] & PVR2_D_LMB_MASK) +#define PVR_I_OPB(pvr) (pvr.pvr[2] & PVR2_I_OPB_MASK) +#define PVR_I_LMB(pvr) (pvr.pvr[2] & PVR2_I_LMB_MASK) +#define PVR_INTERRUPT_IS_EDGE(pvr) \ + (pvr.pvr[2] & PVR2_INTERRUPT_IS_EDGE_MASK) +#define PVR_EDGE_IS_POSITIVE(pvr) \ + (pvr.pvr[2] & PVR2_EDGE_IS_POSITIVE_MASK) +#define PVR_USE_MSR_INSTR(pvr) (pvr.pvr[2] & PVR2_USE_MSR_INSTR) +#define PVR_USE_PCMP_INSTR(pvr) (pvr.pvr[2] & PVR2_USE_PCMP_INSTR) +#define PVR_AREA_OPTIMISED(pvr) (pvr.pvr[2] & PVR2_AREA_OPTIMISED) +#define PVR_USE_MUL64(pvr) (pvr.pvr[2] & PVR2_USE_MUL64_MASK) +#define PVR_OPCODE_0x0_ILLEGAL(pvr) \ + (pvr.pvr[2] & PVR2_OPCODE_0x0_ILL_MASK) +#define PVR_UNALIGNED_EXCEPTION(pvr) \ + (pvr.pvr[2] & PVR2_UNALIGNED_EXC_MASK) +#define PVR_ILL_OPCODE_EXCEPTION(pvr) \ + (pvr.pvr[2] & PVR2_ILL_OPCODE_EXC_MASK) +#define PVR_IOPB_BUS_EXCEPTION(pvr) \ + (pvr.pvr[2] & PVR2_IOPB_BUS_EXC_MASK) +#define PVR_DOPB_BUS_EXCEPTION(pvr) \ + (pvr.pvr[2] & PVR2_DOPB_BUS_EXC_MASK) +#define PVR_DIV_ZERO_EXCEPTION(pvr) \ + (pvr.pvr[2] & PVR2_DIV_ZERO_EXC_MASK) +#define PVR_FPU_EXCEPTION(pvr) (pvr.pvr[2] & PVR2_FPU_EXC_MASK) +#define PVR_FSL_EXCEPTION(pvr) (pvr.pvr[2] & PVR2_USE_EXTEND_FSL) + +#define PVR_DEBUG_ENABLED(pvr) (pvr.pvr[3] & PVR3_DEBUG_ENABLED_MASK) +#define PVR_NUMBER_OF_PC_BRK(pvr) \ + ((pvr.pvr[3] & PVR3_NUMBER_OF_PC_BRK_MASK) >> 25) +#define PVR_NUMBER_OF_RD_ADDR_BRK(pvr) \ + ((pvr.pvr[3] & PVR3_NUMBER_OF_RD_ADDR_BRK_MASK) >> 19) +#define PVR_NUMBER_OF_WR_ADDR_BRK(pvr) \ + ((pvr.pvr[3] & PVR3_NUMBER_OF_WR_ADDR_BRK_MASK) >> 13) +#define PVR_FSL_LINKS(pvr) ((pvr.pvr[3] & PVR3_FSL_LINKS_MASK) >> 7) + +#define PVR_ICACHE_ADDR_TAG_BITS(pvr) \ + ((pvr.pvr[4] & PVR4_ICACHE_ADDR_TAG_BITS_MASK) >> 26) +#define PVR_ICACHE_USE_FSL(pvr) (pvr.pvr[4] & PVR4_ICACHE_USE_FSL_MASK) +#define PVR_ICACHE_ALLOW_WR(pvr) (pvr.pvr[4] & PVR4_ICACHE_ALLOW_WR_MASK) +#define PVR_ICACHE_LINE_LEN(pvr) \ + (1 << ((pvr.pvr[4] & PVR4_ICACHE_LINE_LEN_MASK) >> 21)) +#define PVR_ICACHE_BYTE_SIZE(pvr) \ + (1 << ((pvr.pvr[4] & PVR4_ICACHE_BYTE_SIZE_MASK) >> 16)) + +#define PVR_DCACHE_ADDR_TAG_BITS(pvr) \ + ((pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26) +#define PVR_DCACHE_USE_FSL(pvr) (pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK) +#define PVR_DCACHE_ALLOW_WR(pvr) (pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK) +#define PVR_DCACHE_LINE_LEN(pvr) \ + (1 << ((pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21)) +#define PVR_DCACHE_BYTE_SIZE(pvr) \ + (1 << ((pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16)) + + +#define PVR_ICACHE_BASEADDR(pvr) (pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK) +#define PVR_ICACHE_HIGHADDR(pvr) (pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK) + +#define PVR_DCACHE_BASEADDR(pvr) (pvr.pvr[8] & PVR8_DCACHE_BASEADDR_MASK) +#define PVR_DCACHE_HIGHADDR(pvr) (pvr.pvr[9] & PVR9_DCACHE_HIGHADDR_MASK) + +#define PVR_TARGET_FAMILY(pvr) ((pvr.pvr[10] & PVR10_TARGET_FAMILY_MASK) >> 24) + +#define PVR_MSR_RESET_VALUE(pvr) \ + (pvr.pvr[11] & PVR11_MSR_RESET_VALUE_MASK) + +/* mmu */ +#define PVR_USE_MMU(pvr) ((pvr.pvr[11] & PVR11_USE_MMU) >> 30) +#define PVR_MMU_ITLB_SIZE(pvr) (pvr.pvr[11] & PVR11_MMU_ITLB_SIZE) +#define PVR_MMU_DTLB_SIZE(pvr) (pvr.pvr[11] & PVR11_MMU_DTLB_SIZE) +#define PVR_MMU_TLB_ACCESS(pvr) (pvr.pvr[11] & PVR11_MMU_TLB_ACCESS) +#define PVR_MMU_ZONES(pvr) (pvr.pvr[11] & PVR11_MMU_ZONES) + + +int cpu_has_pvr(void); +void get_pvr(struct pvr_s *pvr); + +#endif /* _ASM_MICROBLAZE_PVR_H */ diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c new file mode 100644 index 0000000..3b6212b --- /dev/null +++ b/arch/microblaze/kernel/cpu/mb.c @@ -0,0 +1,148 @@ +/* + * CPU-version specific code + * + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2006-2009 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + int count = 0; + char *fpga_family = "Unknown"; + char *cpu_ver = "Unknown"; + int i; + + /* Denormalised to get the fpga family string */ + for (i = 0; family_string_lookup[i].s != NULL; i++) { + if (cpuinfo.fpga_family_code == family_string_lookup[i].k) { + fpga_family = (char *)family_string_lookup[i].s; + break; + } + } + + /* Denormalised to get the hw version string */ + for (i = 0; cpu_ver_lookup[i].s != NULL; i++) { + if (cpuinfo.ver_code == cpu_ver_lookup[i].k) { + cpu_ver = (char *)cpu_ver_lookup[i].s; + break; + } + } + + count = seq_printf(m, + "CPU-Family: MicroBlaze\n" + "FPGA-Arch: %s\n" + "CPU-Ver: %s\n" + "CPU-MHz: %d.%02d\n" + "BogoMips: %lu.%02lu\n", + fpga_family, + cpu_ver, + cpuinfo.cpu_clock_freq / + 1000000, + cpuinfo.cpu_clock_freq % + 1000000, + loops_per_jiffy / (500000 / HZ), + (loops_per_jiffy / (5000 / HZ)) % 100); + + count += seq_printf(m, + "HW:\n Shift:\t\t%s\n" + " MSR:\t\t%s\n" + " PCMP:\t\t%s\n" + " DIV:\t\t%s\n", + (cpuinfo.use_instr & PVR0_USE_BARREL_MASK) ? "yes" : "no", + (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) ? "yes" : "no", + (cpuinfo.use_instr & PVR2_USE_PCMP_INSTR) ? "yes" : "no", + (cpuinfo.use_instr & PVR0_USE_DIV_MASK) ? "yes" : "no"); + + count += seq_printf(m, + " MMU:\t\t%x\n", + cpuinfo.mmu); + + count += seq_printf(m, + " MUL:\t\t%s\n" + " FPU:\t\t%s\n", + (cpuinfo.use_mult & PVR2_USE_MUL64_MASK) ? "v2" : + (cpuinfo.use_mult & PVR0_USE_HW_MUL_MASK) ? "v1" : "no", + (cpuinfo.use_fpu & PVR2_USE_FPU2_MASK) ? "v2" : + (cpuinfo.use_fpu & PVR0_USE_FPU_MASK) ? "v1" : "no"); + + count += seq_printf(m, + " Exc:\t\t%s%s%s%s%s%s%s%s\n", + (cpuinfo.use_exc & PVR2_OPCODE_0x0_ILL_MASK) ? "op0x0 " : "", + (cpuinfo.use_exc & PVR2_UNALIGNED_EXC_MASK) ? "unal " : "", + (cpuinfo.use_exc & PVR2_ILL_OPCODE_EXC_MASK) ? "ill " : "", + (cpuinfo.use_exc & PVR2_IOPB_BUS_EXC_MASK) ? "iopb " : "", + (cpuinfo.use_exc & PVR2_DOPB_BUS_EXC_MASK) ? "dopb " : "", + (cpuinfo.use_exc & PVR2_DIV_ZERO_EXC_MASK) ? "zero " : "", + (cpuinfo.use_exc & PVR2_FPU_EXC_MASK) ? "fpu " : "", + (cpuinfo.use_exc & PVR2_USE_FSL_EXC) ? "fsl " : ""); + + if (cpuinfo.use_icache) + count += seq_printf(m, + "Icache:\t\t%ukB\n", + cpuinfo.icache_size >> 10); + else + count += seq_printf(m, "Icache:\t\tno\n"); + + if (cpuinfo.use_dcache) + count += seq_printf(m, + "Dcache:\t\t%ukB\n", + cpuinfo.dcache_size >> 10); + else + count += seq_printf(m, "Dcache:\t\tno\n"); + + count += seq_printf(m, + "HW-Debug:\t%s\n", + cpuinfo.hw_debug ? "yes" : "no"); + + count += seq_printf(m, + "PVR-USR1:\t%x\n" + "PVR-USR2:\t%x\n", + cpuinfo.pvr_user1, + cpuinfo.pvr_user2); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + int i = *pos; + + return i < NR_CPUS ? (void *) (i + 1) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c new file mode 100644 index 0000000..c9a4340 --- /dev/null +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -0,0 +1,81 @@ +/* + * Support for MicroBlaze PVR (processor version register) + * + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include + +/* + * Until we get an assembler that knows about the pvr registers, + * this horrible cruft will have to do. + * That hardcoded opcode is mfs r3, rpvrNN + */ + +#define get_single_pvr(pvrid, val) \ +{ \ + register unsigned tmp __asm__("r3"); \ + tmp = 0x0; /* Prevent warning about unused */ \ + __asm__ __volatile__ ( \ + ".byte 0x94,0x60,0xa0, " #pvrid "\n\t" \ + : "=r" (tmp) : : "memory"); \ + val = tmp; \ +} + +/* + * Does the CPU support the PVR register? + * return value: + * 0: no PVR + * 1: simple PVR + * 2: full PVR + * + * This must work on all CPU versions, including those before the + * PVR was even an option. + */ + +int cpu_has_pvr(void) +{ + unsigned flags; + unsigned pvr0; + + local_save_flags(flags); + + /* PVR bit in MSR tells us if there is any support */ + if (!(flags & PVR_MSR_BIT)) + return 0; + + get_single_pvr(0x00, pvr0); + pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0); + + if (pvr0 & PVR0_PVR_FULL_MASK) + return 1; + + /* for partial PVR use static cpuinfo */ + return 2; +} + +void get_pvr(struct pvr_s *p) +{ + get_single_pvr(0, p->pvr[0]); + get_single_pvr(1, p->pvr[1]); + get_single_pvr(2, p->pvr[2]); + get_single_pvr(3, p->pvr[3]); + get_single_pvr(4, p->pvr[4]); + get_single_pvr(5, p->pvr[5]); + get_single_pvr(6, p->pvr[6]); + get_single_pvr(7, p->pvr[7]); + get_single_pvr(8, p->pvr[8]); + get_single_pvr(9, p->pvr[9]); + get_single_pvr(10, p->pvr[10]); + get_single_pvr(11, p->pvr[11]); +} -- cgit v0.10.2 From 2d43dab99a5387c9bac22fc92e88ae3754672e19 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:19 +0100 Subject: microblaze_v8: defconfig file Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig new file mode 100644 index 0000000..beb7ecd --- /dev/null +++ b/arch/microblaze/configs/nommu_defconfig @@ -0,0 +1,804 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29 +# Tue Mar 24 10:23:20 2009 +# +CONFIG_MICROBLAZE=y +# CONFIG_SWAP is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_PCI is not set +# CONFIG_NO_DMA is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=1 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# Platform options +# +CONFIG_PLATFORM_GENERIC=y +# CONFIG_SELFMOD is not set +# CONFIG_OPT_LIB_FUNCTION is not set +# CONFIG_ALLOW_EDIT_AUTO is not set +CONFIG_KERNEL_BASE_ADDR=0x90000000 +CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_DIV=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2 +CONFIG_XILINX_MICROBLAZE0_USE_FPU=2 +CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d" + +# +# Processor type and features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +# CONFIG_MMU is not set +CONFIG_NO_MMU=y + +# +# Boot options +# +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyUL0,115200" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_OF=y +CONFIG_OF_DEVICE=y +CONFIG_PROC_DEVICETREE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y + +# +# Exectuable file formats +# +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_SELFTEST=y +CONFIG_DEBUG_OBJECTS_FREE=y +CONFIG_DEBUG_OBJECTS_TIMERS=y +CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_NOMMU_REGIONS is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_DEBUG_LIST=y +CONFIG_DEBUG_SG=y +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_EARLY_PRINTK=y +CONFIG_HEART_BEAT=y +# CONFIG_DEBUG_BOOTMEM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y -- cgit v0.10.2 From 6d5af1a35f363d3bca7ecb4560102ff94f792186 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:20 +0100 Subject: microblaze_v8: assembler files head.S, entry-nommu.S, syscall_table.S Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S new file mode 100644 index 0000000..f24b126 --- /dev/null +++ b/arch/microblaze/kernel/entry-nommu.S @@ -0,0 +1,596 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR + .macro disable_irq + msrclr r0, MSR_IE + .endm + + .macro enable_irq + msrset r0, MSR_IE + .endm + + .macro clear_bip + msrclr r0, MSR_BIP + .endm +#else + .macro disable_irq + mfs r11, rmsr + andi r11, r11, ~MSR_IE + mts rmsr, r11 + .endm + + .macro enable_irq + mfs r11, rmsr + ori r11, r11, MSR_IE + mts rmsr, r11 + .endm + + .macro clear_bip + mfs r11, rmsr + andi r11, r11, ~MSR_BIP + mts rmsr, r11 + .endm +#endif + +ENTRY(_interrupt) + swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */ + swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */ + lwi r11, r0, PER_CPU(KM) /* load mode indicator */ + beqid r11, 1f + nop + brid 2f /* jump over */ + addik r1, r1, (-PT_SIZE) /* room for pt_regs (delay slot) */ +1: /* switch to kernel stack */ + lwi r1, r0, PER_CPU(CURRENT_SAVE) /* get the saved current */ + lwi r1, r1, TS_THREAD_INFO /* get the thread info */ + /* calculate kernel stack pointer */ + addik r1, r1, THREAD_SIZE - PT_SIZE +2: + swi r11, r1, PT_MODE /* store the mode */ + lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */ + swi r2, r1, PT_R2 + swi r3, r1, PT_R3 + swi r4, r1, PT_R4 + swi r5, r1, PT_R5 + swi r6, r1, PT_R6 + swi r7, r1, PT_R7 + swi r8, r1, PT_R8 + swi r9, r1, PT_R9 + swi r10, r1, PT_R10 + swi r11, r1, PT_R11 + swi r12, r1, PT_R12 + swi r13, r1, PT_R13 + swi r14, r1, PT_R14 + swi r14, r1, PT_PC + swi r15, r1, PT_R15 + swi r16, r1, PT_R16 + swi r17, r1, PT_R17 + swi r18, r1, PT_R18 + swi r19, r1, PT_R19 + swi r20, r1, PT_R20 + swi r21, r1, PT_R21 + swi r22, r1, PT_R22 + swi r23, r1, PT_R23 + swi r24, r1, PT_R24 + swi r25, r1, PT_R25 + swi r26, r1, PT_R26 + swi r27, r1, PT_R27 + swi r28, r1, PT_R28 + swi r29, r1, PT_R29 + swi r30, r1, PT_R30 + swi r31, r1, PT_R31 + /* special purpose registers */ + mfs r11, rmsr + swi r11, r1, PT_MSR + mfs r11, rear + swi r11, r1, PT_EAR + mfs r11, resr + swi r11, r1, PT_ESR + mfs r11, rfsr + swi r11, r1, PT_FSR + /* reload original stack pointer and save it */ + lwi r11, r0, PER_CPU(ENTRY_SP) + swi r11, r1, PT_R1 + /* update mode indicator we are in kernel mode */ + addik r11, r0, 1 + swi r11, r0, PER_CPU(KM) + /* restore r31 */ + lwi r31, r0, PER_CPU(CURRENT_SAVE) + /* prepare the link register, the argument and jump */ + la r15, r0, ret_from_intr - 8 + addk r6, r0, r15 + braid do_IRQ + add r5, r0, r1 + +ret_from_intr: + lwi r11, r1, PT_MODE + bneid r11, 3f + + lwi r6, r31, TS_THREAD_INFO /* get thread info */ + lwi r19, r6, TI_FLAGS /* get flags in thread info */ + /* do an extra work if any bits are set */ + + andi r11, r19, _TIF_NEED_RESCHED + beqi r11, 1f + bralid r15, schedule + nop +1: andi r11, r19, _TIF_SIGPENDING + beqid r11, no_intr_reshed + addk r5, r1, r0 + addk r7, r0, r0 + bralid r15, do_signal + addk r6, r0, r0 + +no_intr_reshed: + /* save mode indicator */ + lwi r11, r1, PT_MODE +3: + swi r11, r0, PER_CPU(KM) + + /* save r31 */ + swi r31, r0, PER_CPU(CURRENT_SAVE) +restore_context: + /* special purpose registers */ + lwi r11, r1, PT_FSR + mts rfsr, r11 + lwi r11, r1, PT_ESR + mts resr, r11 + lwi r11, r1, PT_EAR + mts rear, r11 + lwi r11, r1, PT_MSR + mts rmsr, r11 + + lwi r31, r1, PT_R31 + lwi r30, r1, PT_R30 + lwi r29, r1, PT_R29 + lwi r28, r1, PT_R28 + lwi r27, r1, PT_R27 + lwi r26, r1, PT_R26 + lwi r25, r1, PT_R25 + lwi r24, r1, PT_R24 + lwi r23, r1, PT_R23 + lwi r22, r1, PT_R22 + lwi r21, r1, PT_R21 + lwi r20, r1, PT_R20 + lwi r19, r1, PT_R19 + lwi r18, r1, PT_R18 + lwi r17, r1, PT_R17 + lwi r16, r1, PT_R16 + lwi r15, r1, PT_R15 + lwi r14, r1, PT_PC + lwi r13, r1, PT_R13 + lwi r12, r1, PT_R12 + lwi r11, r1, PT_R11 + lwi r10, r1, PT_R10 + lwi r9, r1, PT_R9 + lwi r8, r1, PT_R8 + lwi r7, r1, PT_R7 + lwi r6, r1, PT_R6 + lwi r5, r1, PT_R5 + lwi r4, r1, PT_R4 + lwi r3, r1, PT_R3 + lwi r2, r1, PT_R2 + lwi r1, r1, PT_R1 + rtid r14, 0 + nop + +ENTRY(_reset) + brai 0; + +ENTRY(_user_exception) + swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */ + swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */ + lwi r11, r0, PER_CPU(KM) /* load mode indicator */ + beqid r11, 1f /* Already in kernel mode? */ + nop + brid 2f /* jump over */ + addik r1, r1, (-PT_SIZE) /* Room for pt_regs (delay slot) */ +1: /* Switch to kernel stack */ + lwi r1, r0, PER_CPU(CURRENT_SAVE) /* get the saved current */ + lwi r1, r1, TS_THREAD_INFO /* get the thread info */ + /* calculate kernel stack pointer */ + addik r1, r1, THREAD_SIZE - PT_SIZE + swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */ + lwi r11, r0, PER_CPU(KM) /* load mode indicator */ +2: + swi r11, r1, PT_MODE /* store the mode */ + lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */ + /* save them on stack */ + swi r2, r1, PT_R2 + swi r3, r1, PT_R3 /* r3: _always_ in clobber list; see unistd.h */ + swi r4, r1, PT_R4 /* r4: _always_ in clobber list; see unistd.h */ + swi r5, r1, PT_R5 + swi r6, r1, PT_R6 + swi r7, r1, PT_R7 + swi r8, r1, PT_R8 + swi r9, r1, PT_R9 + swi r10, r1, PT_R10 + swi r11, r1, PT_R11 + /* r12: _always_ in clobber list; see unistd.h */ + swi r12, r1, PT_R12 + swi r13, r1, PT_R13 + /* r14: _always_ in clobber list; see unistd.h */ + swi r14, r1, PT_R14 + /* but we want to return to the next inst. */ + addik r14, r14, 0x4 + swi r14, r1, PT_PC /* increment by 4 and store in pc */ + swi r15, r1, PT_R15 + swi r16, r1, PT_R16 + swi r17, r1, PT_R17 + swi r18, r1, PT_R18 + swi r19, r1, PT_R19 + swi r20, r1, PT_R20 + swi r21, r1, PT_R21 + swi r22, r1, PT_R22 + swi r23, r1, PT_R23 + swi r24, r1, PT_R24 + swi r25, r1, PT_R25 + swi r26, r1, PT_R26 + swi r27, r1, PT_R27 + swi r28, r1, PT_R28 + swi r29, r1, PT_R29 + swi r30, r1, PT_R30 + swi r31, r1, PT_R31 + + disable_irq + nop /* make sure IE bit is in effect */ + clear_bip /* once IE is in effect it is safe to clear BIP */ + nop + + /* special purpose registers */ + mfs r11, rmsr + swi r11, r1, PT_MSR + mfs r11, rear + swi r11, r1, PT_EAR + mfs r11, resr + swi r11, r1, PT_ESR + mfs r11, rfsr + swi r11, r1, PT_FSR + /* reload original stack pointer and save it */ + lwi r11, r0, PER_CPU(ENTRY_SP) + swi r11, r1, PT_R1 + /* update mode indicator we are in kernel mode */ + addik r11, r0, 1 + swi r11, r0, PER_CPU(KM) + /* restore r31 */ + lwi r31, r0, PER_CPU(CURRENT_SAVE) + /* re-enable interrupts now we are in kernel mode */ + enable_irq + + /* See if the system call number is valid. */ + addi r11, r12, -__NR_syscalls + bgei r11, 1f /* return to user if not valid */ + /* Figure out which function to use for this system call. */ + /* Note Microblaze barrel shift is optional, so don't rely on it */ + add r12, r12, r12 /* convert num -> ptr */ + add r12, r12, r12 + lwi r12, r12, sys_call_table /* Get function pointer */ + la r15, r0, ret_to_user-8 /* set return address */ + bra r12 /* Make the system call. */ + bri 0 /* won't reach here */ +1: + brid ret_to_user /* jump to syscall epilogue */ + addi r3, r0, -ENOSYS /* set errno in delay slot */ + +/* + * Debug traps are like a system call, but entered via brki r14, 0x60 + * All we need to do is send the SIGTRAP signal to current, ptrace and do_signal + * will handle the rest + */ +ENTRY(_debug_exception) + swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */ + lwi r1, r0, PER_CPU(CURRENT_SAVE) /* get the saved current */ + lwi r1, r1, TS_THREAD_INFO /* get the thread info */ + addik r1, r1, THREAD_SIZE - PT_SIZE /* get the kernel stack */ + swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */ + lwi r11, r0, PER_CPU(KM) /* load mode indicator */ +//save_context: + swi r11, r1, PT_MODE /* store the mode */ + lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */ + /* save them on stack */ + swi r2, r1, PT_R2 + swi r3, r1, PT_R3 /* r3: _always_ in clobber list; see unistd.h */ + swi r4, r1, PT_R4 /* r4: _always_ in clobber list; see unistd.h */ + swi r5, r1, PT_R5 + swi r6, r1, PT_R6 + swi r7, r1, PT_R7 + swi r8, r1, PT_R8 + swi r9, r1, PT_R9 + swi r10, r1, PT_R10 + swi r11, r1, PT_R11 + /* r12: _always_ in clobber list; see unistd.h */ + swi r12, r1, PT_R12 + swi r13, r1, PT_R13 + /* r14: _always_ in clobber list; see unistd.h */ + swi r14, r1, PT_R14 + swi r14, r1, PT_PC /* Will return to interrupted instruction */ + swi r15, r1, PT_R15 + swi r16, r1, PT_R16 + swi r17, r1, PT_R17 + swi r18, r1, PT_R18 + swi r19, r1, PT_R19 + swi r20, r1, PT_R20 + swi r21, r1, PT_R21 + swi r22, r1, PT_R22 + swi r23, r1, PT_R23 + swi r24, r1, PT_R24 + swi r25, r1, PT_R25 + swi r26, r1, PT_R26 + swi r27, r1, PT_R27 + swi r28, r1, PT_R28 + swi r29, r1, PT_R29 + swi r30, r1, PT_R30 + swi r31, r1, PT_R31 + + disable_irq + nop /* make sure IE bit is in effect */ + clear_bip /* once IE is in effect it is safe to clear BIP */ + nop + + /* special purpose registers */ + mfs r11, rmsr + swi r11, r1, PT_MSR + mfs r11, rear + swi r11, r1, PT_EAR + mfs r11, resr + swi r11, r1, PT_ESR + mfs r11, rfsr + swi r11, r1, PT_FSR + /* reload original stack pointer and save it */ + lwi r11, r0, PER_CPU(ENTRY_SP) + swi r11, r1, PT_R1 + /* update mode indicator we are in kernel mode */ + addik r11, r0, 1 + swi r11, r0, PER_CPU(KM) + /* restore r31 */ + lwi r31, r0, PER_CPU(CURRENT_SAVE) + /* re-enable interrupts now we are in kernel mode */ + enable_irq + + addi r5, r0, SIGTRAP /* sending the trap signal */ + add r6, r0, r31 /* to current */ + bralid r15, send_sig + add r7, r0, r0 /* 3rd param zero */ + + /* Restore r3/r4 to work around how ret_to_user works */ + lwi r3, r1, PT_R3 + lwi r4, r1, PT_R4 + bri ret_to_user + +ENTRY(_break) + bri 0 + +/* struct task_struct *_switch_to(struct thread_info *prev, + struct thread_info *next); */ +ENTRY(_switch_to) + /* prepare return value */ + addk r3, r0, r31 + + /* save registers in cpu_context */ + /* use r11 and r12, volatile registers, as temp register */ + addik r11, r5, TI_CPU_CONTEXT + swi r1, r11, CC_R1 + swi r2, r11, CC_R2 + /* skip volatile registers. + * they are saved on stack when we jumped to _switch_to() */ + /* dedicated registers */ + swi r13, r11, CC_R13 + swi r14, r11, CC_R14 + swi r15, r11, CC_R15 + swi r16, r11, CC_R16 + swi r17, r11, CC_R17 + swi r18, r11, CC_R18 + /* save non-volatile registers */ + swi r19, r11, CC_R19 + swi r20, r11, CC_R20 + swi r21, r11, CC_R21 + swi r22, r11, CC_R22 + swi r23, r11, CC_R23 + swi r24, r11, CC_R24 + swi r25, r11, CC_R25 + swi r26, r11, CC_R26 + swi r27, r11, CC_R27 + swi r28, r11, CC_R28 + swi r29, r11, CC_R29 + swi r30, r11, CC_R30 + /* special purpose registers */ + mfs r12, rmsr + swi r12, r11, CC_MSR + mfs r12, rear + swi r12, r11, CC_EAR + mfs r12, resr + swi r12, r11, CC_ESR + mfs r12, rfsr + swi r12, r11, CC_FSR + + /* update r31, the current */ + lwi r31, r6, TI_TASK + swi r31, r0, PER_CPU(CURRENT_SAVE) + + /* get new process' cpu context and restore */ + addik r11, r6, TI_CPU_CONTEXT + + /* special purpose registers */ + lwi r12, r11, CC_FSR + mts rfsr, r12 + lwi r12, r11, CC_ESR + mts resr, r12 + lwi r12, r11, CC_EAR + mts rear, r12 + lwi r12, r11, CC_MSR + mts rmsr, r12 + /* non-volatile registers */ + lwi r30, r11, CC_R30 + lwi r29, r11, CC_R29 + lwi r28, r11, CC_R28 + lwi r27, r11, CC_R27 + lwi r26, r11, CC_R26 + lwi r25, r11, CC_R25 + lwi r24, r11, CC_R24 + lwi r23, r11, CC_R23 + lwi r22, r11, CC_R22 + lwi r21, r11, CC_R21 + lwi r20, r11, CC_R20 + lwi r19, r11, CC_R19 + /* dedicated registers */ + lwi r18, r11, CC_R18 + lwi r17, r11, CC_R17 + lwi r16, r11, CC_R16 + lwi r15, r11, CC_R15 + lwi r14, r11, CC_R14 + lwi r13, r11, CC_R13 + /* skip volatile registers */ + lwi r2, r11, CC_R2 + lwi r1, r11, CC_R1 + + rtsd r15, 8 + nop + +ENTRY(ret_from_fork) + addk r5, r0, r3 + addk r6, r0, r1 + brlid r15, schedule_tail + nop + swi r31, r1, PT_R31 /* save r31 in user context. */ + /* will soon be restored to r31 in ret_to_user */ + addk r3, r0, r0 + brid ret_to_user + nop + +work_pending: + andi r11, r19, _TIF_NEED_RESCHED + beqi r11, 1f + bralid r15, schedule + nop +1: andi r11, r19, _TIF_SIGPENDING + beqi r11, no_work_pending + addk r5, r1, r0 + addik r7, r0, 1 + bralid r15, do_signal + addk r6, r0, r0 + bri no_work_pending + +ENTRY(ret_to_user) + disable_irq + + swi r4, r1, PT_R4 /* return val */ + swi r3, r1, PT_R3 /* return val */ + + lwi r6, r31, TS_THREAD_INFO /* get thread info */ + lwi r19, r6, TI_FLAGS /* get flags in thread info */ + bnei r19, work_pending /* do an extra work if any bits are set */ +no_work_pending: + disable_irq + + /* save r31 */ + swi r31, r0, PER_CPU(CURRENT_SAVE) + /* save mode indicator */ + lwi r18, r1, PT_MODE + swi r18, r0, PER_CPU(KM) +//restore_context: + /* special purpose registers */ + lwi r18, r1, PT_FSR + mts rfsr, r18 + lwi r18, r1, PT_ESR + mts resr, r18 + lwi r18, r1, PT_EAR + mts rear, r18 + lwi r18, r1, PT_MSR + mts rmsr, r18 + + lwi r31, r1, PT_R31 + lwi r30, r1, PT_R30 + lwi r29, r1, PT_R29 + lwi r28, r1, PT_R28 + lwi r27, r1, PT_R27 + lwi r26, r1, PT_R26 + lwi r25, r1, PT_R25 + lwi r24, r1, PT_R24 + lwi r23, r1, PT_R23 + lwi r22, r1, PT_R22 + lwi r21, r1, PT_R21 + lwi r20, r1, PT_R20 + lwi r19, r1, PT_R19 + lwi r18, r1, PT_R18 + lwi r17, r1, PT_R17 + lwi r16, r1, PT_R16 + lwi r15, r1, PT_R15 + lwi r14, r1, PT_PC + lwi r13, r1, PT_R13 + lwi r12, r1, PT_R12 + lwi r11, r1, PT_R11 + lwi r10, r1, PT_R10 + lwi r9, r1, PT_R9 + lwi r8, r1, PT_R8 + lwi r7, r1, PT_R7 + lwi r6, r1, PT_R6 + lwi r5, r1, PT_R5 + lwi r4, r1, PT_R4 /* return val */ + lwi r3, r1, PT_R3 /* return val */ + lwi r2, r1, PT_R2 + lwi r1, r1, PT_R1 + + rtid r14, 0 + nop + +sys_vfork_wrapper: + brid sys_vfork + addk r5, r1, r0 + +sys_clone_wrapper: + brid sys_clone + addk r7, r1, r0 + +sys_execve_wrapper: + brid sys_execve + addk r8, r1, r0 + +sys_sigreturn_wrapper: + brid sys_sigreturn + addk r5, r1, r0 + +sys_rt_sigreturn_wrapper: + brid sys_rt_sigreturn + addk r5, r1, r0 + +sys_sigsuspend_wrapper: + brid sys_rt_sigsuspend + addk r6, r1, r0 + +sys_rt_sigsuspend_wrapper: + brid sys_rt_sigsuspend + addk r7, r1, r0 + + /* Interrupt vector table */ + .section .init.ivt, "ax" + .org 0x0 + brai _reset + brai _user_exception + brai _interrupt + brai _break + brai _hw_exception_handler + .org 0x60 + brai _debug_exception + +.section .rodata,"a" +#include "syscall_table.S" + +syscall_table_size=(.-sys_call_table) diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S new file mode 100644 index 0000000..319dc35 --- /dev/null +++ b/arch/microblaze/kernel/head.S @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include + + .text +ENTRY(_start) + mfs r1, rmsr + andi r1, r1, ~2 + mts rmsr, r1 + +/* save fdt to kernel location */ +/* r7 stores pointer to fdt blob */ + beqi r7, no_fdt_arg + or r11, r0, r0 /* incremment */ + ori r4, r0, TOPHYS(_fdt_start) /* save bram context */ + ori r3, r0, (0x4000 - 4) +_copy_fdt: + lw r12, r7, r11 /* r12 = r7 + r11 */ + sw r12, r4, r11 /* addr[r4 + r11] = r12 */ + addik r11, r11, 4 /* increment counting */ + bgtid r3, _copy_fdt /* loop for all entries */ + addik r3, r3, -4 /* descrement loop */ +no_fdt_arg: + + /* Initialize small data anchors */ + la r13, r0, _KERNEL_SDA_BASE_ + la r2, r0, _KERNEL_SDA2_BASE_ + + /* Initialize stack pointer */ + la r1, r0, init_thread_union + THREAD_SIZE - 4 + + /* Initialize r31 with current task address */ + la r31, r0, init_task + + /* + * Call platform dependent initialize function. + * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for + * the function. + */ + la r8, r0, machine_early_init + brald r15, r8 + nop + + la r15, r0, machine_halt + braid start_kernel + nop diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S new file mode 100644 index 0000000..529b0db --- /dev/null +++ b/arch/microblaze/kernel/syscall_table.S @@ -0,0 +1,365 @@ +ENTRY(sys_call_table) + .long sys_restart_syscall /* 0 - old "setup()" system call, + * used for restarting */ + .long sys_exit + .long sys_ni_syscall /* was fork */ + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve_wrapper + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown + .long sys_ni_syscall /* old break syscall holder */ + .long sys_ni_syscall /* old stat */ + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid + .long sys_getuid + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_ni_syscall /* oldfstat */ + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 - old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid + .long sys_getgid + .long sys_signal + .long sys_geteuid + .long sys_getegid /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys() */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* olduname */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid /* 70 */ + .long sys_setregid + .long sys_sigsuspend_wrapper + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_ni_syscall /* old_getrlimit */ + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups /* 80 */ + .long sys_setgroups + .long sys_ni_syscall /* old_select */ + .long sys_symlink + .long sys_ni_syscall /* oldlstat */ + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long sys_ni_syscall /* old_readdir */ + .long sys_mmap /* 90 */ /* old_mmap */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* ioperm */ + .long sys_socketcall + .long sys_syslog /* operation with system console */ + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_ni_syscall /* uname */ + .long sys_ni_syscall /* 110 */ /* iopl */ + .long sys_vhangup + .long sys_ni_syscall /* old "idle" system call */ + .long sys_ni_syscall /* old sys_vm86old */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_sigreturn_wrapper + .long sys_clone_wrapper /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* modify_ldt */ + .long sys_adjtimex + .long sys_mprotect /* 125: sys_mprotect */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* reserved for afs_syscall */ + .long sys_setfsuid + .long sys_setfsgid + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150: sys_mlock */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid + .long sys_getresuid /* 165 */ + .long sys_ni_syscall /* sys_vm86 */ + .long sys_ni_syscall /* Old sys_query_module */ + .long sys_poll + .long sys_nfsservctl + .long sys_setresgid /* 170 */ + .long sys_getresgid + .long sys_prctl + .long sys_rt_sigreturn_wrapper + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend_wrapper + .long sys_pread64 /* 180 */ + .long sys_pwrite64 + .long sys_chown + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_ni_syscall /* sigaltstack */ + .long sys_sendfile + .long sys_ni_syscall /* reserved for streams1 */ + .long sys_ni_syscall /* reserved for streams2 */ + .long sys_vfork_wrapper /* 190 */ + .long sys_getrlimit + .long sys_mmap2 /* mmap2 */ + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 /* 220 */ + .long sys_fcntl64 + .long sys_ni_syscall /* reserved for TUX */ + .long sys_ni_syscall + .long sys_gettid + .long sys_readahead /* 225 */ + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr /* 230 */ + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr /* 235 */ + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill + .long sys_sendfile64 + .long sys_futex /* 240 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_ni_syscall /* set_thread_area */ + .long sys_ni_syscall /* get_thread_area */ + .long sys_io_setup /* 245 */ + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 /* 250 */ + .long sys_ni_syscall + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 255 */ + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64 + .long sys_ni_syscall /* sys_vserver */ + .long sys_mbind + .long sys_get_mempolicy + .long sys_set_mempolicy + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 280 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_kexec_load + .long sys_waitid + .long sys_ni_syscall /* 285 */ /* available */ + .long sys_add_key + .long sys_request_key + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get /* 290 */ + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch + .long sys_ni_syscall /* sys_migrate_pages */ + .long sys_openat /* 295 */ + .long sys_mkdirat + .long sys_mknodat + .long sys_fchownat + .long sys_ni_syscall + .long sys_fstatat64 /* 300 */ + .long sys_unlinkat + .long sys_renameat + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat /* 305 */ + .long sys_fchmodat + .long sys_faccessat + .long sys_ni_syscall /* pselect6 */ + .long sys_ni_syscall /* sys_ppoll */ + .long sys_unshare /* 310 */ + .long sys_set_robust_list + .long sys_get_robust_list + .long sys_splice + .long sys_sync_file_range + .long sys_tee /* 315 */ + .long sys_vmsplice + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait + .long sys_utimensat /* 320 */ + .long sys_signalfd + .long sys_timerfd_create + .long sys_eventfd + .long sys_fallocate + .long sys_semtimedop /* 325 */ + .long sys_timerfd_settime + .long sys_timerfd_gettime + .long sys_semctl + .long sys_semget + .long sys_semop /* 330 */ + .long sys_msgctl + .long sys_msgget + .long sys_msgrcv + .long sys_msgsnd + .long sys_shmat /* 335 */ + .long sys_shmctl + .long sys_shmdt + .long sys_shmget + .long sys_signalfd4 /* new syscall */ + .long sys_eventfd2 /* 340 */ + .long sys_epoll_create1 + .long sys_dup3 + .long sys_pipe2 + .long sys_inotify_init1 + .long sys_socket /* 345 */ + .long sys_socketpair + .long sys_bind + .long sys_listen + .long sys_accept + .long sys_connect /* 350 */ + .long sys_getsockname + .long sys_getpeername + .long sys_sendto + .long sys_send + .long sys_recvfrom /* 355 */ + .long sys_recv + .long sys_setsockopt + .long sys_getsockopt + .long sys_shutdown + .long sys_sendmsg /* 360 */ + .long sys_recvmsg + .long sys_ni_syscall -- cgit v0.10.2 From 16bfeaf23ead78d937b3eacfb5c7cdc7bff6d3da Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:20 +0100 Subject: microblaze_v8: vmlinux.lds.S - linker script Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S new file mode 100644 index 0000000..840385e --- /dev/null +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +OUTPUT_FORMAT("elf32-microblaze", "elf32-microblaze", "elf32-microblaze") +OUTPUT_ARCH(microblaze) +ENTRY(_start) + +#include + +jiffies = jiffies_64 + 4; + +SECTIONS { + . = CONFIG_KERNEL_BASE_ADDR; + + .text : { + _text = . ; + _stext = . ; + *(.text .text.*) + *(.fixup) + + *(.exitcall.exit) + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + . = ALIGN (4) ; + _etext = . ; + } + + . = ALIGN (4) ; + _fdt_start = . ; /* place for fdt blob */ + . = . + 0x4000; + _fdt_end = . ; + + . = ALIGN(16); + RODATA + . = ALIGN(16); + __ex_table : { + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + } + + /* + * sdata2 section can go anywhere, but must be word aligned + * and SDA2_BASE must point to the middle of it + */ + .sdata2 : { + _ssrw = .; + . = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */ + *(.sdata2) + . = ALIGN(8); + _essrw = .; + _ssrw_size = _essrw - _ssrw; + _KERNEL_SDA2_BASE_ = _ssrw + (_ssrw_size / 2); + } + + _sdata = . ; + .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */ + *(.data) + } + . = ALIGN(32); + .data.cacheline_aligned : { *(.data.cacheline_aligned) } + _edata = . ; + + /* Reserve some low RAM for r0 based memory references */ + . = ALIGN(0x4) ; + r0_ram = . ; + . = . + 4096; /* a page should be enough */ + + /* The initial task */ + . = ALIGN(8192); + .data.init_task : { *(.data.init_task) } + + /* Under the microblaze ABI, .sdata and .sbss must be contiguous */ + . = ALIGN(8); + .sdata : { + _ssro = .; + *(.sdata) + } + + .sbss : { + _ssbss = .; + *(.sbss) + _esbss = .; + _essro = .; + _ssro_size = _essro - _ssro ; + _KERNEL_SDA_BASE_ = _ssro + (_ssro_size / 2) ; + } + + __init_begin = .; + + . = ALIGN(4096); + .init.text : { + _sinittext = . ; + *(.init.text) + *(.exit.text) + *(.exit.data) + _einittext = .; + } + + .init.data : { *(.init.data) } + + . = ALIGN(4); + .init.ivt : { + __ivt_start = .; + *(.init.ivt) + __ivt_end = .; + } + + .init.setup : { + __setup_start = .; + *(.init.setup) + __setup_end = .; + } + + .initcall.init : { + __initcall_start = .; + INITCALLS + __initcall_end = .; + } + + .con_initcall.init : { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + } + + __init_end_before_initramfs = .; + + .init.ramfs ALIGN(4096) : { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + . = ALIGN(4); + LONG(0); +/* + * FIXME this can break initramfs for MMU. + * Pad init.ramfs up to page boundary, + * so that __init_end == __bss_start. This will make image.elf + * consistent with the image.bin + */ + /* . = ALIGN(4096); */ + } + __init_end = .; + + .bss ALIGN (4096) : { /* page aligned when MMU used */ + __bss_start = . ; + *(.bss*) + *(COMMON) + . = ALIGN (4) ; + __bss_stop = . ; + _ebss = . ; + } + . = ALIGN(4096); + _end = .; +} -- cgit v0.10.2 From 322ae8eb91c1730728400c5b8dd1108aef1205b8 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:21 +0100 Subject: microblaze_v8: supported function for memory - kernel/lib Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S new file mode 100644 index 0000000..02e3ab4 --- /dev/null +++ b/arch/microblaze/lib/fastcopy.S @@ -0,0 +1,662 @@ +/* + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * Copyright (C) 2008 Jim Law - Iris LP All rights reserved. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Jim Law + * + * intended to replace: + * memcpy in memcpy.c and + * memmove in memmove.c + * ... in arch/microblaze/lib + * + * + * assly_fastcopy.S + * + * Attempt at quicker memcpy and memmove for MicroBlaze + * Input : Operand1 in Reg r5 - destination address + * Operand2 in Reg r6 - source address + * Operand3 in Reg r7 - number of bytes to transfer + * Output: Result in Reg r3 - starting destinaition address + * + * + * Explanation: + * Perform (possibly unaligned) copy of a block of memory + * between mem locations with size of xfer spec'd in bytes + */ + +#include + + .globl memcpy + .ent memcpy + +memcpy: +fast_memcpy_ascending: + /* move d to return register as value of function */ + addi r3, r5, 0 + + addi r4, r0, 4 /* n = 4 */ + cmpu r4, r4, r7 /* n = c - n (unsigned) */ + blti r4, a_xfer_end /* if n < 0, less than one word to transfer */ + + /* transfer first 0~3 bytes to get aligned dest address */ + andi r4, r5, 3 /* n = d & 3 */ + /* if zero, destination already aligned */ + beqi r4, a_dalign_done + /* n = 4 - n (yields 3, 2, 1 transfers for 1, 2, 3 addr offset) */ + rsubi r4, r4, 4 + rsub r7, r4, r7 /* c = c - n adjust c */ + +a_xfer_first_loop: + /* if no bytes left to transfer, transfer the bulk */ + beqi r4, a_dalign_done + lbui r11, r6, 0 /* h = *s */ + sbi r11, r5, 0 /* *d = h */ + addi r6, r6, 1 /* s++ */ + addi r5, r5, 1 /* d++ */ + brid a_xfer_first_loop /* loop */ + addi r4, r4, -1 /* n-- (IN DELAY SLOT) */ + +a_dalign_done: + addi r4, r0, 32 /* n = 32 */ + cmpu r4, r4, r7 /* n = c - n (unsigned) */ + /* if n < 0, less than one block to transfer */ + blti r4, a_block_done + +a_block_xfer: + andi r4, r7, 0xffffffe0 /* n = c & ~31 */ + rsub r7, r4, r7 /* c = c - n */ + + andi r9, r6, 3 /* t1 = s & 3 */ + /* if temp != 0, unaligned transfers needed */ + bnei r9, a_block_unaligned + +a_block_aligned: + lwi r9, r6, 0 /* t1 = *(s + 0) */ + lwi r10, r6, 4 /* t2 = *(s + 4) */ + lwi r11, r6, 8 /* t3 = *(s + 8) */ + lwi r12, r6, 12 /* t4 = *(s + 12) */ + swi r9, r5, 0 /* *(d + 0) = t1 */ + swi r10, r5, 4 /* *(d + 4) = t2 */ + swi r11, r5, 8 /* *(d + 8) = t3 */ + swi r12, r5, 12 /* *(d + 12) = t4 */ + lwi r9, r6, 16 /* t1 = *(s + 16) */ + lwi r10, r6, 20 /* t2 = *(s + 20) */ + lwi r11, r6, 24 /* t3 = *(s + 24) */ + lwi r12, r6, 28 /* t4 = *(s + 28) */ + swi r9, r5, 16 /* *(d + 16) = t1 */ + swi r10, r5, 20 /* *(d + 20) = t2 */ + swi r11, r5, 24 /* *(d + 24) = t3 */ + swi r12, r5, 28 /* *(d + 28) = t4 */ + addi r6, r6, 32 /* s = s + 32 */ + addi r4, r4, -32 /* n = n - 32 */ + bneid r4, a_block_aligned /* while (n) loop */ + addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */ + bri a_block_done + +a_block_unaligned: + andi r8, r6, 0xfffffffc /* as = s & ~3 */ + add r6, r6, r4 /* s = s + n */ + lwi r11, r8, 0 /* h = *(as + 0) */ + + addi r9, r9, -1 + beqi r9, a_block_u1 /* t1 was 1 => 1 byte offset */ + addi r9, r9, -1 + beqi r9, a_block_u2 /* t1 was 2 => 2 byte offset */ + +a_block_u3: + bslli r11, r11, 24 /* h = h << 24 */ +a_bu3_loop: + lwi r12, r8, 4 /* v = *(as + 4) */ + bsrli r9, r12, 8 /* t1 = v >> 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 0 /* *(d + 0) = t1 */ + bslli r11, r12, 24 /* h = v << 24 */ + lwi r12, r8, 8 /* v = *(as + 8) */ + bsrli r9, r12, 8 /* t1 = v >> 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 4 /* *(d + 4) = t1 */ + bslli r11, r12, 24 /* h = v << 24 */ + lwi r12, r8, 12 /* v = *(as + 12) */ + bsrli r9, r12, 8 /* t1 = v >> 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 8 /* *(d + 8) = t1 */ + bslli r11, r12, 24 /* h = v << 24 */ + lwi r12, r8, 16 /* v = *(as + 16) */ + bsrli r9, r12, 8 /* t1 = v >> 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 12 /* *(d + 12) = t1 */ + bslli r11, r12, 24 /* h = v << 24 */ + lwi r12, r8, 20 /* v = *(as + 20) */ + bsrli r9, r12, 8 /* t1 = v >> 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 16 /* *(d + 16) = t1 */ + bslli r11, r12, 24 /* h = v << 24 */ + lwi r12, r8, 24 /* v = *(as + 24) */ + bsrli r9, r12, 8 /* t1 = v >> 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 20 /* *(d + 20) = t1 */ + bslli r11, r12, 24 /* h = v << 24 */ + lwi r12, r8, 28 /* v = *(as + 28) */ + bsrli r9, r12, 8 /* t1 = v >> 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 24 /* *(d + 24) = t1 */ + bslli r11, r12, 24 /* h = v << 24 */ + lwi r12, r8, 32 /* v = *(as + 32) */ + bsrli r9, r12, 8 /* t1 = v >> 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 28 /* *(d + 28) = t1 */ + bslli r11, r12, 24 /* h = v << 24 */ + addi r8, r8, 32 /* as = as + 32 */ + addi r4, r4, -32 /* n = n - 32 */ + bneid r4, a_bu3_loop /* while (n) loop */ + addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */ + bri a_block_done + +a_block_u1: + bslli r11, r11, 8 /* h = h << 8 */ +a_bu1_loop: + lwi r12, r8, 4 /* v = *(as + 4) */ + bsrli r9, r12, 24 /* t1 = v >> 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 0 /* *(d + 0) = t1 */ + bslli r11, r12, 8 /* h = v << 8 */ + lwi r12, r8, 8 /* v = *(as + 8) */ + bsrli r9, r12, 24 /* t1 = v >> 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 4 /* *(d + 4) = t1 */ + bslli r11, r12, 8 /* h = v << 8 */ + lwi r12, r8, 12 /* v = *(as + 12) */ + bsrli r9, r12, 24 /* t1 = v >> 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 8 /* *(d + 8) = t1 */ + bslli r11, r12, 8 /* h = v << 8 */ + lwi r12, r8, 16 /* v = *(as + 16) */ + bsrli r9, r12, 24 /* t1 = v >> 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 12 /* *(d + 12) = t1 */ + bslli r11, r12, 8 /* h = v << 8 */ + lwi r12, r8, 20 /* v = *(as + 20) */ + bsrli r9, r12, 24 /* t1 = v >> 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 16 /* *(d + 16) = t1 */ + bslli r11, r12, 8 /* h = v << 8 */ + lwi r12, r8, 24 /* v = *(as + 24) */ + bsrli r9, r12, 24 /* t1 = v >> 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 20 /* *(d + 20) = t1 */ + bslli r11, r12, 8 /* h = v << 8 */ + lwi r12, r8, 28 /* v = *(as + 28) */ + bsrli r9, r12, 24 /* t1 = v >> 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 24 /* *(d + 24) = t1 */ + bslli r11, r12, 8 /* h = v << 8 */ + lwi r12, r8, 32 /* v = *(as + 32) */ + bsrli r9, r12, 24 /* t1 = v >> 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 28 /* *(d + 28) = t1 */ + bslli r11, r12, 8 /* h = v << 8 */ + addi r8, r8, 32 /* as = as + 32 */ + addi r4, r4, -32 /* n = n - 32 */ + bneid r4, a_bu1_loop /* while (n) loop */ + addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */ + bri a_block_done + +a_block_u2: + bslli r11, r11, 16 /* h = h << 16 */ +a_bu2_loop: + lwi r12, r8, 4 /* v = *(as + 4) */ + bsrli r9, r12, 16 /* t1 = v >> 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 0 /* *(d + 0) = t1 */ + bslli r11, r12, 16 /* h = v << 16 */ + lwi r12, r8, 8 /* v = *(as + 8) */ + bsrli r9, r12, 16 /* t1 = v >> 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 4 /* *(d + 4) = t1 */ + bslli r11, r12, 16 /* h = v << 16 */ + lwi r12, r8, 12 /* v = *(as + 12) */ + bsrli r9, r12, 16 /* t1 = v >> 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 8 /* *(d + 8) = t1 */ + bslli r11, r12, 16 /* h = v << 16 */ + lwi r12, r8, 16 /* v = *(as + 16) */ + bsrli r9, r12, 16 /* t1 = v >> 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 12 /* *(d + 12) = t1 */ + bslli r11, r12, 16 /* h = v << 16 */ + lwi r12, r8, 20 /* v = *(as + 20) */ + bsrli r9, r12, 16 /* t1 = v >> 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 16 /* *(d + 16) = t1 */ + bslli r11, r12, 16 /* h = v << 16 */ + lwi r12, r8, 24 /* v = *(as + 24) */ + bsrli r9, r12, 16 /* t1 = v >> 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 20 /* *(d + 20) = t1 */ + bslli r11, r12, 16 /* h = v << 16 */ + lwi r12, r8, 28 /* v = *(as + 28) */ + bsrli r9, r12, 16 /* t1 = v >> 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 24 /* *(d + 24) = t1 */ + bslli r11, r12, 16 /* h = v << 16 */ + lwi r12, r8, 32 /* v = *(as + 32) */ + bsrli r9, r12, 16 /* t1 = v >> 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 28 /* *(d + 28) = t1 */ + bslli r11, r12, 16 /* h = v << 16 */ + addi r8, r8, 32 /* as = as + 32 */ + addi r4, r4, -32 /* n = n - 32 */ + bneid r4, a_bu2_loop /* while (n) loop */ + addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */ + +a_block_done: + addi r4, r0, 4 /* n = 4 */ + cmpu r4, r4, r7 /* n = c - n (unsigned) */ + blti r4, a_xfer_end /* if n < 0, less than one word to transfer */ + +a_word_xfer: + andi r4, r7, 0xfffffffc /* n = c & ~3 */ + addi r10, r0, 0 /* offset = 0 */ + + andi r9, r6, 3 /* t1 = s & 3 */ + /* if temp != 0, unaligned transfers needed */ + bnei r9, a_word_unaligned + +a_word_aligned: + lw r9, r6, r10 /* t1 = *(s+offset) */ + sw r9, r5, r10 /* *(d+offset) = t1 */ + addi r4, r4,-4 /* n-- */ + bneid r4, a_word_aligned /* loop */ + addi r10, r10, 4 /* offset++ (IN DELAY SLOT) */ + + bri a_word_done + +a_word_unaligned: + andi r8, r6, 0xfffffffc /* as = s & ~3 */ + lwi r11, r8, 0 /* h = *(as + 0) */ + addi r8, r8, 4 /* as = as + 4 */ + + addi r9, r9, -1 + beqi r9, a_word_u1 /* t1 was 1 => 1 byte offset */ + addi r9, r9, -1 + beqi r9, a_word_u2 /* t1 was 2 => 2 byte offset */ + +a_word_u3: + bslli r11, r11, 24 /* h = h << 24 */ +a_wu3_loop: + lw r12, r8, r10 /* v = *(as + offset) */ + bsrli r9, r12, 8 /* t1 = v >> 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + sw r9, r5, r10 /* *(d + offset) = t1 */ + bslli r11, r12, 24 /* h = v << 24 */ + addi r4, r4,-4 /* n = n - 4 */ + bneid r4, a_wu3_loop /* while (n) loop */ + addi r10, r10, 4 /* offset = ofset + 4 (IN DELAY SLOT) */ + + bri a_word_done + +a_word_u1: + bslli r11, r11, 8 /* h = h << 8 */ +a_wu1_loop: + lw r12, r8, r10 /* v = *(as + offset) */ + bsrli r9, r12, 24 /* t1 = v >> 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + sw r9, r5, r10 /* *(d + offset) = t1 */ + bslli r11, r12, 8 /* h = v << 8 */ + addi r4, r4,-4 /* n = n - 4 */ + bneid r4, a_wu1_loop /* while (n) loop */ + addi r10, r10, 4 /* offset = ofset + 4 (IN DELAY SLOT) */ + + bri a_word_done + +a_word_u2: + bslli r11, r11, 16 /* h = h << 16 */ +a_wu2_loop: + lw r12, r8, r10 /* v = *(as + offset) */ + bsrli r9, r12, 16 /* t1 = v >> 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + sw r9, r5, r10 /* *(d + offset) = t1 */ + bslli r11, r12, 16 /* h = v << 16 */ + addi r4, r4,-4 /* n = n - 4 */ + bneid r4, a_wu2_loop /* while (n) loop */ + addi r10, r10, 4 /* offset = ofset + 4 (IN DELAY SLOT) */ + +a_word_done: + add r5, r5, r10 /* d = d + offset */ + add r6, r6, r10 /* s = s + offset */ + rsub r7, r10, r7 /* c = c - offset */ + +a_xfer_end: +a_xfer_end_loop: + beqi r7, a_done /* while (c) */ + lbui r9, r6, 0 /* t1 = *s */ + addi r6, r6, 1 /* s++ */ + sbi r9, r5, 0 /* *d = t1 */ + addi r7, r7, -1 /* c-- */ + brid a_xfer_end_loop /* loop */ + addi r5, r5, 1 /* d++ (IN DELAY SLOT) */ + +a_done: + rtsd r15, 8 + nop + +.end memcpy +/*----------------------------------------------------------------------------*/ + .globl memmove + .ent memmove + +memmove: + cmpu r4, r5, r6 /* n = s - d */ + bgei r4,fast_memcpy_ascending + +fast_memcpy_descending: + /* move d to return register as value of function */ + addi r3, r5, 0 + + add r5, r5, r7 /* d = d + c */ + add r6, r6, r7 /* s = s + c */ + + addi r4, r0, 4 /* n = 4 */ + cmpu r4, r4, r7 /* n = c - n (unsigned) */ + blti r4,d_xfer_end /* if n < 0, less than one word to transfer */ + + /* transfer first 0~3 bytes to get aligned dest address */ + andi r4, r5, 3 /* n = d & 3 */ + /* if zero, destination already aligned */ + beqi r4,d_dalign_done + rsub r7, r4, r7 /* c = c - n adjust c */ + +d_xfer_first_loop: + /* if no bytes left to transfer, transfer the bulk */ + beqi r4,d_dalign_done + addi r6, r6, -1 /* s-- */ + addi r5, r5, -1 /* d-- */ + lbui r11, r6, 0 /* h = *s */ + sbi r11, r5, 0 /* *d = h */ + brid d_xfer_first_loop /* loop */ + addi r4, r4, -1 /* n-- (IN DELAY SLOT) */ + +d_dalign_done: + addi r4, r0, 32 /* n = 32 */ + cmpu r4, r4, r7 /* n = c - n (unsigned) */ + /* if n < 0, less than one block to transfer */ + blti r4, d_block_done + +d_block_xfer: + andi r4, r7, 0xffffffe0 /* n = c & ~31 */ + rsub r7, r4, r7 /* c = c - n */ + + andi r9, r6, 3 /* t1 = s & 3 */ + /* if temp != 0, unaligned transfers needed */ + bnei r9, d_block_unaligned + +d_block_aligned: + addi r6, r6, -32 /* s = s - 32 */ + addi r5, r5, -32 /* d = d - 32 */ + lwi r9, r6, 28 /* t1 = *(s + 28) */ + lwi r10, r6, 24 /* t2 = *(s + 24) */ + lwi r11, r6, 20 /* t3 = *(s + 20) */ + lwi r12, r6, 16 /* t4 = *(s + 16) */ + swi r9, r5, 28 /* *(d + 28) = t1 */ + swi r10, r5, 24 /* *(d + 24) = t2 */ + swi r11, r5, 20 /* *(d + 20) = t3 */ + swi r12, r5, 16 /* *(d + 16) = t4 */ + lwi r9, r6, 12 /* t1 = *(s + 12) */ + lwi r10, r6, 8 /* t2 = *(s + 8) */ + lwi r11, r6, 4 /* t3 = *(s + 4) */ + lwi r12, r6, 0 /* t4 = *(s + 0) */ + swi r9, r5, 12 /* *(d + 12) = t1 */ + swi r10, r5, 8 /* *(d + 8) = t2 */ + swi r11, r5, 4 /* *(d + 4) = t3 */ + addi r4, r4, -32 /* n = n - 32 */ + bneid r4, d_block_aligned /* while (n) loop */ + swi r12, r5, 0 /* *(d + 0) = t4 (IN DELAY SLOT) */ + bri d_block_done + +d_block_unaligned: + andi r8, r6, 0xfffffffc /* as = s & ~3 */ + rsub r6, r4, r6 /* s = s - n */ + lwi r11, r8, 0 /* h = *(as + 0) */ + + addi r9, r9, -1 + beqi r9,d_block_u1 /* t1 was 1 => 1 byte offset */ + addi r9, r9, -1 + beqi r9,d_block_u2 /* t1 was 2 => 2 byte offset */ + +d_block_u3: + bsrli r11, r11, 8 /* h = h >> 8 */ +d_bu3_loop: + addi r8, r8, -32 /* as = as - 32 */ + addi r5, r5, -32 /* d = d - 32 */ + lwi r12, r8, 28 /* v = *(as + 28) */ + bslli r9, r12, 24 /* t1 = v << 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 28 /* *(d + 28) = t1 */ + bsrli r11, r12, 8 /* h = v >> 8 */ + lwi r12, r8, 24 /* v = *(as + 24) */ + bslli r9, r12, 24 /* t1 = v << 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 24 /* *(d + 24) = t1 */ + bsrli r11, r12, 8 /* h = v >> 8 */ + lwi r12, r8, 20 /* v = *(as + 20) */ + bslli r9, r12, 24 /* t1 = v << 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 20 /* *(d + 20) = t1 */ + bsrli r11, r12, 8 /* h = v >> 8 */ + lwi r12, r8, 16 /* v = *(as + 16) */ + bslli r9, r12, 24 /* t1 = v << 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 16 /* *(d + 16) = t1 */ + bsrli r11, r12, 8 /* h = v >> 8 */ + lwi r12, r8, 12 /* v = *(as + 12) */ + bslli r9, r12, 24 /* t1 = v << 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 12 /* *(d + 112) = t1 */ + bsrli r11, r12, 8 /* h = v >> 8 */ + lwi r12, r8, 8 /* v = *(as + 8) */ + bslli r9, r12, 24 /* t1 = v << 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 8 /* *(d + 8) = t1 */ + bsrli r11, r12, 8 /* h = v >> 8 */ + lwi r12, r8, 4 /* v = *(as + 4) */ + bslli r9, r12, 24 /* t1 = v << 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 4 /* *(d + 4) = t1 */ + bsrli r11, r12, 8 /* h = v >> 8 */ + lwi r12, r8, 0 /* v = *(as + 0) */ + bslli r9, r12, 24 /* t1 = v << 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 0 /* *(d + 0) = t1 */ + addi r4, r4, -32 /* n = n - 32 */ + bneid r4, d_bu3_loop /* while (n) loop */ + bsrli r11, r12, 8 /* h = v >> 8 (IN DELAY SLOT) */ + bri d_block_done + +d_block_u1: + bsrli r11, r11, 24 /* h = h >> 24 */ +d_bu1_loop: + addi r8, r8, -32 /* as = as - 32 */ + addi r5, r5, -32 /* d = d - 32 */ + lwi r12, r8, 28 /* v = *(as + 28) */ + bslli r9, r12, 8 /* t1 = v << 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 28 /* *(d + 28) = t1 */ + bsrli r11, r12, 24 /* h = v >> 24 */ + lwi r12, r8, 24 /* v = *(as + 24) */ + bslli r9, r12, 8 /* t1 = v << 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 24 /* *(d + 24) = t1 */ + bsrli r11, r12, 24 /* h = v >> 24 */ + lwi r12, r8, 20 /* v = *(as + 20) */ + bslli r9, r12, 8 /* t1 = v << 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 20 /* *(d + 20) = t1 */ + bsrli r11, r12, 24 /* h = v >> 24 */ + lwi r12, r8, 16 /* v = *(as + 16) */ + bslli r9, r12, 8 /* t1 = v << 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 16 /* *(d + 16) = t1 */ + bsrli r11, r12, 24 /* h = v >> 24 */ + lwi r12, r8, 12 /* v = *(as + 12) */ + bslli r9, r12, 8 /* t1 = v << 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 12 /* *(d + 112) = t1 */ + bsrli r11, r12, 24 /* h = v >> 24 */ + lwi r12, r8, 8 /* v = *(as + 8) */ + bslli r9, r12, 8 /* t1 = v << 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 8 /* *(d + 8) = t1 */ + bsrli r11, r12, 24 /* h = v >> 24 */ + lwi r12, r8, 4 /* v = *(as + 4) */ + bslli r9, r12, 8 /* t1 = v << 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 4 /* *(d + 4) = t1 */ + bsrli r11, r12, 24 /* h = v >> 24 */ + lwi r12, r8, 0 /* v = *(as + 0) */ + bslli r9, r12, 8 /* t1 = v << 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 0 /* *(d + 0) = t1 */ + addi r4, r4, -32 /* n = n - 32 */ + bneid r4, d_bu1_loop /* while (n) loop */ + bsrli r11, r12, 24 /* h = v >> 24 (IN DELAY SLOT) */ + bri d_block_done + +d_block_u2: + bsrli r11, r11, 16 /* h = h >> 16 */ +d_bu2_loop: + addi r8, r8, -32 /* as = as - 32 */ + addi r5, r5, -32 /* d = d - 32 */ + lwi r12, r8, 28 /* v = *(as + 28) */ + bslli r9, r12, 16 /* t1 = v << 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 28 /* *(d + 28) = t1 */ + bsrli r11, r12, 16 /* h = v >> 16 */ + lwi r12, r8, 24 /* v = *(as + 24) */ + bslli r9, r12, 16 /* t1 = v << 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 24 /* *(d + 24) = t1 */ + bsrli r11, r12, 16 /* h = v >> 16 */ + lwi r12, r8, 20 /* v = *(as + 20) */ + bslli r9, r12, 16 /* t1 = v << 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 20 /* *(d + 20) = t1 */ + bsrli r11, r12, 16 /* h = v >> 16 */ + lwi r12, r8, 16 /* v = *(as + 16) */ + bslli r9, r12, 16 /* t1 = v << 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 16 /* *(d + 16) = t1 */ + bsrli r11, r12, 16 /* h = v >> 16 */ + lwi r12, r8, 12 /* v = *(as + 12) */ + bslli r9, r12, 16 /* t1 = v << 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 12 /* *(d + 112) = t1 */ + bsrli r11, r12, 16 /* h = v >> 16 */ + lwi r12, r8, 8 /* v = *(as + 8) */ + bslli r9, r12, 16 /* t1 = v << 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 8 /* *(d + 8) = t1 */ + bsrli r11, r12, 16 /* h = v >> 16 */ + lwi r12, r8, 4 /* v = *(as + 4) */ + bslli r9, r12, 16 /* t1 = v << 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 4 /* *(d + 4) = t1 */ + bsrli r11, r12, 16 /* h = v >> 16 */ + lwi r12, r8, 0 /* v = *(as + 0) */ + bslli r9, r12, 16 /* t1 = v << 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + swi r9, r5, 0 /* *(d + 0) = t1 */ + addi r4, r4, -32 /* n = n - 32 */ + bneid r4, d_bu2_loop /* while (n) loop */ + bsrli r11, r12, 16 /* h = v >> 16 (IN DELAY SLOT) */ + +d_block_done: + addi r4, r0, 4 /* n = 4 */ + cmpu r4, r4, r7 /* n = c - n (unsigned) */ + blti r4,d_xfer_end /* if n < 0, less than one word to transfer */ + +d_word_xfer: + andi r4, r7, 0xfffffffc /* n = c & ~3 */ + rsub r5, r4, r5 /* d = d - n */ + rsub r6, r4, r6 /* s = s - n */ + rsub r7, r4, r7 /* c = c - n */ + + andi r9, r6, 3 /* t1 = s & 3 */ + /* if temp != 0, unaligned transfers needed */ + bnei r9, d_word_unaligned + +d_word_aligned: + addi r4, r4,-4 /* n-- */ + lw r9, r6, r4 /* t1 = *(s+n) */ + bneid r4, d_word_aligned /* loop */ + sw r9, r5, r4 /* *(d+n) = t1 (IN DELAY SLOT) */ + + bri d_word_done + +d_word_unaligned: + andi r8, r6, 0xfffffffc /* as = s & ~3 */ + lw r11, r8, r4 /* h = *(as + n) */ + + addi r9, r9, -1 + beqi r9,d_word_u1 /* t1 was 1 => 1 byte offset */ + addi r9, r9, -1 + beqi r9,d_word_u2 /* t1 was 2 => 2 byte offset */ + +d_word_u3: + bsrli r11, r11, 8 /* h = h >> 8 */ +d_wu3_loop: + addi r4, r4,-4 /* n = n - 4 */ + lw r12, r8, r4 /* v = *(as + n) */ + bslli r9, r12, 24 /* t1 = v << 24 */ + or r9, r11, r9 /* t1 = h | t1 */ + sw r9, r5, r4 /* *(d + n) = t1 */ + bneid r4, d_wu3_loop /* while (n) loop */ + bsrli r11, r12, 8 /* h = v >> 8 (IN DELAY SLOT) */ + + bri d_word_done + +d_word_u1: + bsrli r11, r11, 24 /* h = h >> 24 */ +d_wu1_loop: + addi r4, r4,-4 /* n = n - 4 */ + lw r12, r8, r4 /* v = *(as + n) */ + bslli r9, r12, 8 /* t1 = v << 8 */ + or r9, r11, r9 /* t1 = h | t1 */ + sw r9, r5, r4 /* *(d + n) = t1 */ + bneid r4, d_wu1_loop /* while (n) loop */ + bsrli r11, r12, 24 /* h = v >> 24 (IN DELAY SLOT) */ + + bri d_word_done + +d_word_u2: + bsrli r11, r11, 16 /* h = h >> 16 */ +d_wu2_loop: + addi r4, r4,-4 /* n = n - 4 */ + lw r12, r8, r4 /* v = *(as + n) */ + bslli r9, r12, 16 /* t1 = v << 16 */ + or r9, r11, r9 /* t1 = h | t1 */ + sw r9, r5, r4 /* *(d + n) = t1 */ + bneid r4, d_wu2_loop /* while (n) loop */ + bsrli r11, r12, 16 /* h = v >> 16 (IN DELAY SLOT) */ + +d_word_done: + +d_xfer_end: +d_xfer_end_loop: + beqi r7, a_done /* while (c) */ + addi r6, r6, -1 /* s-- */ + lbui r9, r6, 0 /* t1 = *s */ + addi r5, r5, -1 /* d-- */ + sbi r9, r5, 0 /* *d = t1 */ + brid d_xfer_end_loop /* loop */ + addi r7, r7, -1 /* c-- (IN DELAY SLOT) */ + +d_done: + rtsd r15, 8 + nop + +.end memmove diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c new file mode 100644 index 0000000..5880119 --- /dev/null +++ b/arch/microblaze/lib/memcpy.c @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * Reasonably optimised generic C-code for memcpy on Microblaze + * This is generic C code to do efficient, alignment-aware memcpy. + * + * It is based on demo code originally Copyright 2001 by Intel Corp, taken from + * http://www.embedded.com/showArticle.jhtml?articleID=19205567 + * + * Attempts were made, unsuccesfully, to contact the original + * author of this code (Michael Morrow, Intel). Below is the original + * copyright notice. + * + * This software has been developed by Intel Corporation. + * Intel specifically disclaims all warranties, express or + * implied, and all liability, including consequential and + * other indirect damages, for the use of this program, including + * liability for infringement of any proprietary rights, + * and including the warranties of merchantability and fitness + * for a particular purpose. Intel does not assume any + * responsibility for and errors which may appear in this program + * not any responsibility to update it. + */ + +#include +#include +#include +#include + +#include +#include + +#ifdef __HAVE_ARCH_MEMCPY +void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) +{ + const char *src = v_src; + char *dst = v_dst; +#ifndef CONFIG_OPT_LIB_FUNCTION + /* Simple, byte oriented memcpy. */ + while (c--) + *dst++ = *src++; + + return v_dst; +#else + /* The following code tries to optimize the copy by using unsigned + * alignment. This will work fine if both source and destination are + * aligned on the same boundary. However, if they are aligned on + * different boundaries shifts will be necessary. This might result in + * bad performance on MicroBlaze systems without a barrel shifter. + */ + const uint32_t *i_src; + uint32_t *i_dst; + + if (c >= 4) { + unsigned value, buf_hold; + + /* Align the dstination to a word boundry. */ + /* This is done in an endian independant manner. */ + switch ((unsigned long)dst & 3) { + case 1: + *dst++ = *src++; + --c; + case 2: + *dst++ = *src++; + --c; + case 3: + *dst++ = *src++; + --c; + } + + i_dst = (void *)dst; + + /* Choose a copy scheme based on the source */ + /* alignment relative to dstination. */ + switch ((unsigned long)src & 3) { + case 0x0: /* Both byte offsets are aligned */ + i_src = (const void *)src; + + for (; c >= 4; c -= 4) + *i_dst++ = *i_src++; + + src = (const void *)i_src; + break; + case 0x1: /* Unaligned - Off by 1 */ + /* Word align the source */ + i_src = (const void *) ((unsigned)src & ~3); + + /* Load the holding buffer */ + buf_hold = *i_src++ << 8; + + for (; c >= 4; c -= 4) { + value = *i_src++; + *i_dst++ = buf_hold | value >> 24; + buf_hold = value << 8; + } + + /* Realign the source */ + src = (const void *)i_src; + src -= 3; + break; + case 0x2: /* Unaligned - Off by 2 */ + /* Word align the source */ + i_src = (const void *) ((unsigned)src & ~3); + + /* Load the holding buffer */ + buf_hold = *i_src++ << 16; + + for (; c >= 4; c -= 4) { + value = *i_src++; + *i_dst++ = buf_hold | value >> 16; + buf_hold = value << 16; + } + + /* Realign the source */ + src = (const void *)i_src; + src -= 2; + break; + case 0x3: /* Unaligned - Off by 3 */ + /* Word align the source */ + i_src = (const void *) ((unsigned)src & ~3); + + /* Load the holding buffer */ + buf_hold = *i_src++ << 24; + + for (; c >= 4; c -= 4) { + value = *i_src++; + *i_dst++ = buf_hold | value >> 8; + buf_hold = value << 24; + } + + /* Realign the source */ + src = (const void *)i_src; + src -= 1; + break; + } + dst = (void *)i_dst; + } + + /* Finish off any remaining bytes */ + /* simple fast copy, ... unless a cache boundry is crossed */ + switch (c) { + case 3: + *dst++ = *src++; + case 2: + *dst++ = *src++; + case 1: + *dst++ = *src++; + } + + return v_dst; +#endif +} +EXPORT_SYMBOL(memcpy); +#endif /* __HAVE_ARCH_MEMCPY */ + +void *cacheable_memcpy(void *d, const void *s, __kernel_size_t c) +{ + return memcpy(d, s, c); +} diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c new file mode 100644 index 0000000..d4e9f49 --- /dev/null +++ b/arch/microblaze/lib/memmove.c @@ -0,0 +1,175 @@ +/* + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * Reasonably optimised generic C-code for memcpy on Microblaze + * This is generic C code to do efficient, alignment-aware memmove. + * + * It is based on demo code originally Copyright 2001 by Intel Corp, taken from + * http://www.embedded.com/showArticle.jhtml?articleID=19205567 + * + * Attempts were made, unsuccesfully, to contact the original + * author of this code (Michael Morrow, Intel). Below is the original + * copyright notice. + * + * This software has been developed by Intel Corporation. + * Intel specifically disclaims all warranties, express or + * implied, and all liability, including consequential and + * other indirect damages, for the use of this program, including + * liability for infringement of any proprietary rights, + * and including the warranties of merchantability and fitness + * for a particular purpose. Intel does not assume any + * responsibility for and errors which may appear in this program + * not any responsibility to update it. + */ + +#include +#include +#include +#include +#include + +#ifdef __HAVE_ARCH_MEMMOVE +void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) +{ + const char *src = v_src; + char *dst = v_dst; + +#ifdef CONFIG_OPT_LIB_FUNCTION + const uint32_t *i_src; + uint32_t *i_dst; +#endif + + if (!c) + return v_dst; + + /* Use memcpy when source is higher than dest */ + if (v_dst <= v_src) + return memcpy(v_dst, v_src, c); + +#ifndef CONFIG_OPT_LIB_FUNCTION + /* copy backwards, from end to beginning */ + src += c; + dst += c; + + /* Simple, byte oriented memmove. */ + while (c--) + *--dst = *--src; + + return v_dst; +#else + /* The following code tries to optimize the copy by using unsigned + * alignment. This will work fine if both source and destination are + * aligned on the same boundary. However, if they are aligned on + * different boundaries shifts will be necessary. This might result in + * bad performance on MicroBlaze systems without a barrel shifter. + */ + /* FIXME this part needs more test */ + /* Do a descending copy - this is a bit trickier! */ + dst += c; + src += c; + + if (c >= 4) { + unsigned value, buf_hold; + + /* Align the destination to a word boundry. */ + /* This is done in an endian independant manner. */ + + switch ((unsigned long)dst & 3) { + case 3: + *--dst = *--src; + --c; + case 2: + *--dst = *--src; + --c; + case 1: + *--dst = *--src; + --c; + } + + i_dst = (void *)dst; + /* Choose a copy scheme based on the source */ + /* alignment relative to dstination. */ + switch ((unsigned long)src & 3) { + case 0x0: /* Both byte offsets are aligned */ + + i_src = (const void *)src; + + for (; c >= 4; c -= 4) + *--i_dst = *--i_src; + + src = (const void *)i_src; + break; + case 0x1: /* Unaligned - Off by 1 */ + /* Word align the source */ + i_src = (const void *) (((unsigned)src + 4) & ~3); + + /* Load the holding buffer */ + buf_hold = *--i_src >> 24; + + for (; c >= 4; c -= 4) { + value = *--i_src; + *--i_dst = buf_hold << 8 | value; + buf_hold = value >> 24; + } + + /* Realign the source */ + src = (const void *)i_src; + src += 1; + break; + case 0x2: /* Unaligned - Off by 2 */ + /* Word align the source */ + i_src = (const void *) (((unsigned)src + 4) & ~3); + + /* Load the holding buffer */ + buf_hold = *--i_src >> 16; + + for (; c >= 4; c -= 4) { + value = *--i_src; + *--i_dst = buf_hold << 16 | value; + buf_hold = value >> 16; + } + + /* Realign the source */ + src = (const void *)i_src; + src += 2; + break; + case 0x3: /* Unaligned - Off by 3 */ + /* Word align the source */ + i_src = (const void *) (((unsigned)src + 4) & ~3); + + /* Load the holding buffer */ + buf_hold = *--i_src >> 8; + + for (; c >= 4; c -= 4) { + value = *--i_src; + *--i_dst = buf_hold << 24 | value; + buf_hold = value >> 8; + } + + /* Realign the source */ + src = (const void *)i_src; + src += 3; + break; + } + dst = (void *)i_dst; + } + + /* simple fast copy, ... unless a cache boundry is crossed */ + /* Finish off any remaining bytes */ + switch (c) { + case 4: + *--dst = *--src; + case 3: + *--dst = *--src; + case 2: + *--dst = *--src; + case 1: + *--dst = *--src; + } + return v_dst; +#endif +} +EXPORT_SYMBOL(memmove); +#endif /* __HAVE_ARCH_MEMMOVE */ diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c new file mode 100644 index 0000000..941dc8f --- /dev/null +++ b/arch/microblaze/lib/memset.c @@ -0,0 +1,82 @@ +/* + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * Reasonably optimised generic C-code for memset on Microblaze + * This is generic C code to do efficient, alignment-aware memcpy. + * + * It is based on demo code originally Copyright 2001 by Intel Corp, taken from + * http://www.embedded.com/showArticle.jhtml?articleID=19205567 + * + * Attempts were made, unsuccesfully, to contact the original + * author of this code (Michael Morrow, Intel). Below is the original + * copyright notice. + * + * This software has been developed by Intel Corporation. + * Intel specifically disclaims all warranties, express or + * implied, and all liability, including consequential and + * other indirect damages, for the use of this program, including + * liability for infringement of any proprietary rights, + * and including the warranties of merchantability and fitness + * for a particular purpose. Intel does not assume any + * responsibility for and errors which may appear in this program + * not any responsibility to update it. + */ + +#include +#include +#include +#include +#include + +#ifdef __HAVE_ARCH_MEMSET +void *memset(void *v_src, int c, __kernel_size_t n) +{ + + char *src = v_src; +#ifdef CONFIG_OPT_LIB_FUNCTION + uint32_t *i_src; + uint32_t w32; +#endif + /* Truncate c to 8 bits */ + c = (c & 0xFF); + +#ifdef CONFIG_OPT_LIB_FUNCTION + /* Make a repeating word out of it */ + w32 = c; + w32 |= w32 << 8; + w32 |= w32 << 16; + + if (n >= 4) { + /* Align the destination to a word boundary */ + /* This is done in an endian independant manner */ + switch ((unsigned) src & 3) { + case 1: + *src++ = c; + --n; + case 2: + *src++ = c; + --n; + case 3: + *src++ = c; + --n; + } + + i_src = (void *)src; + + /* Do as many full-word copies as we can */ + for (; n >= 4; n -= 4) + *i_src++ = w32; + + src = (void *)i_src; + } +#endif + /* Simple, byte oriented memset or the rest of count. */ + while (n--) + *src++ = c; + + return v_src; +} +EXPORT_SYMBOL(memset); +#endif /* __HAVE_ARCH_MEMSET */ -- cgit v0.10.2 From f11e044b449c0534cd2de3465f68925f68190866 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:22 +0100 Subject: microblaze_v8: checksum support Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h new file mode 100644 index 0000000..92b3076 --- /dev/null +++ b/arch/microblaze/include/asm/checksum.h @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_CHECKSUM_H +#define _ASM_MICROBLAZE_CHECKSUM_H + +#include + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __asm__("add %0, %0, %1\n\t" + "addc %0, %0, %2\n\t" + "addc %0, %0, %3\n\t" + "addc %0, %0, r0\n\t" + : "+&d" (sum) + : "d" (saddr), "d" (daddr), "d" (len + proto)); + + return sum; +} + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +extern __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum); + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +extern __wsum csum_partial_copy_from_user(const char *src, char *dst, + int len, int sum, int *csum_err); + +#define csum_partial_copy_nocheck(src, dst, len, sum) \ + csum_partial_copy((src), (dst), (len), (sum)) + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + */ +extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +/* + * Fold a partial checksum + */ +static inline __sum16 csum_fold(unsigned int sum) +{ + sum = (sum & 0xffff) + (sum >> 16); + sum = (sum & 0xffff) + (sum >> 16); + return ~sum; +} + +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +extern __sum16 ip_compute_csum(const unsigned char *buff, int len); + +#endif /* _ASM_MICROBLAZE_CHECKSUM_H */ diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c new file mode 100644 index 0000000..8093400 --- /dev/null +++ b/arch/microblaze/lib/checksum.c @@ -0,0 +1,163 @@ +/* + * + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * IP/TCP/UDP checksumming routines + * + * Authors: Jorge Cwik, + * Arnt Gulbrandsen, + * Tom May, + * Andreas Schwab, + * Lots of code moved from tcp.c and ip.c; see those files + * for more names. + * + * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek: + * Fixed some nasty bugs, causing some horrible crashes. + * A: At some points, the sum (%0) was used as + * length-counter instead of the length counter + * (%1). Thanks to Roman Hodek for pointing this out. + * B: GCC seems to mess up if one uses too many + * data-registers to hold input values and one tries to + * specify d0 and d1 as scratch registers. Letting gcc + * choose these registers itself solves the problem. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access + kills, so most of the assembly has to go. */ + +#include +#include +#include + +static inline unsigned short from32to16(unsigned long x) +{ + /* add up 16-bit and 16-bit for 16+c bit */ + x = (x & 0xffff) + (x >> 16); + /* add up carry.. */ + x = (x & 0xffff) + (x >> 16); + return x; +} + +static unsigned int do_csum(const unsigned char *buff, int len) +{ + int odd, count; + unsigned long result = 0; + + if (len <= 0) + goto out; + odd = 1 & (unsigned long) buff; + if (odd) { + result = *buff; + len--; + buff++; + } + count = len >> 1; /* nr of 16-bit words.. */ + if (count) { + if (2 & (unsigned long) buff) { + result += *(unsigned short *) buff; + count--; + len -= 2; + buff += 2; + } + count >>= 1; /* nr of 32-bit words.. */ + if (count) { + unsigned long carry = 0; + do { + unsigned long w = *(unsigned long *) buff; + count--; + buff += 4; + result += carry; + result += w; + carry = (w > result); + } while (count); + result += carry; + result = (result & 0xffff) + (result >> 16); + } + if (len & 2) { + result += *(unsigned short *) buff; + buff += 2; + } + } + if (len & 1) + result += (*buff << 8); + result = from32to16(result); + if (odd) + result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); +out: + return result; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +__sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + return (__force __sum16)~do_csum(iph, ihl*4); +} + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum) +{ + unsigned int result = do_csum(buff, len); + + /* add in old sum, and carry.. */ + result += sum; + if (sum > result) + result += 1; + return result; +} +EXPORT_SYMBOL(csum_partial); + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +__sum16 ip_compute_csum(const unsigned char *buff, int len) +{ + return ~do_csum(buff, len); +} +EXPORT_SYMBOL(ip_compute_csum); + +/* + * copy from fs while checksumming, otherwise like csum_partial + */ +__wsum +csum_partial_copy_from_user(const char __user *src, char *dst, int len, + int sum, int *csum_err) +{ + if (csum_err) + *csum_err = 0; + memcpy(dst, src, len); + return csum_partial(dst, len, sum); +} +EXPORT_SYMBOL(csum_partial_copy_from_user); + +/* + * copy from ds while checksumming, otherwise like csum_partial + */ +__wsum +csum_partial_copy(const char *src, char *dst, int len, int sum) +{ + memcpy(dst, src, len); + return csum_partial(dst, len, sum); +} +EXPORT_SYMBOL(csum_partial_copy); -- cgit v0.10.2 From 89272a51b322aa14332d58896b9d377ea9b4e551 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:22 +0100 Subject: microblaze_v8: early_printk support Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c new file mode 100644 index 0000000..62cc789 --- /dev/null +++ b/arch/microblaze/kernel/early_printk.c @@ -0,0 +1,107 @@ +/* + * Early printk support for Microblaze. + * + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2003-2006 Yasushi SHOJI + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static u32 early_console_initialized; +static u32 base_addr; + +static void early_printk_putc(char c) +{ + /* + * Limit how many times we'll spin waiting for TX FIFO status. + * This will prevent lockups if the base address is incorrectly + * set, or any other issue on the UARTLITE. + * This limit is pretty arbitrary, unless we are at about 10 baud + * we'll never timeout on a working UART. + */ + + unsigned retries = 10000; + /* read status bit - 0x8 offset */ + while (retries-- && (in_be32(base_addr + 8) & (1 << 3))) + ; + + /* Only attempt the iowrite if we didn't timeout */ + /* write to TX_FIFO - 0x4 offset */ + if (retries) + out_be32(base_addr + 4, c & 0xff); +} + +static void early_printk_write(struct console *unused, + const char *s, unsigned n) +{ + while (*s && n-- > 0) { + early_printk_putc(*s); + if (*s == '\n') + early_printk_putc('\r'); + s++; + } +} + +static struct console early_serial_console = { + .name = "earlyser", + .write = early_printk_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static struct console *early_console = &early_serial_console; + +void early_printk(const char *fmt, ...) +{ + char buf[512]; + int n; + va_list ap; + + if (early_console_initialized) { + va_start(ap, fmt); + n = vscnprintf(buf, 512, fmt, ap); + early_console->write(early_console, buf, n); + va_end(ap); + } +} + +int __init setup_early_printk(char *opt) +{ + if (early_console_initialized) + return 1; + + base_addr = early_uartlite_console(); + if (base_addr) { + early_console_initialized = 1; + early_printk("early_printk_console is enabled at 0x%08x\n", + base_addr); + + /* register_console(early_console); */ + + return 0; + } else + return 1; +} + +void __init disable_early_printk(void) +{ + if (!early_console_initialized || !early_console) + return; + printk(KERN_WARNING "disabling early console\n"); + unregister_console(early_console); + early_console_initialized = 0; +} -- cgit v0.10.2 From 2660663ff2d34a3665381a2591bbc3ce0cdbd69c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:23 +0100 Subject: microblaze_v8: uaccess files Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h new file mode 100644 index 0000000..5a3ffc3 --- /dev/null +++ b/arch/microblaze/include/asm/uaccess.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_UACCESS_H +#define _ASM_MICROBLAZE_UACCESS_H + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include +#include +#include /* RLIMIT_FSIZE */ +#include + +#include +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +extern int ___range_ok(unsigned long addr, unsigned long size); + +#define __range_ok(addr, size) \ + ___range_ok((unsigned long)(addr), (unsigned long)(size)) + +#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) +#define __access_ok(add, size) (__range_ok((addr), (size)) == 0) + +extern inline int bad_user_access_length(void) +{ + return 0; +} +/* FIXME this is function for optimalization -> memcpy */ +#define __get_user(var, ptr) \ + ({ \ + int __gu_err = 0; \ + switch (sizeof(*(ptr))) { \ + case 1: \ + case 2: \ + case 4: \ + (var) = *(ptr); \ + break; \ + case 8: \ + memcpy((void *) &(var), (ptr), 8); \ + break; \ + default: \ + (var) = 0; \ + __gu_err = __get_user_bad(); \ + break; \ + } \ + __gu_err; \ + }) + +#define __get_user_bad() (bad_user_access_length(), (-EFAULT)) + +#define __put_user(var, ptr) \ + ({ \ + int __pu_err = 0; \ + switch (sizeof(*(ptr))) { \ + case 1: \ + case 2: \ + case 4: \ + *(ptr) = (var); \ + break; \ + case 8: { \ + typeof(*(ptr)) __pu_val = var; \ + memcpy(ptr, &__pu_val, sizeof(__pu_val));\ + } \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ + }) + +#define __put_user_bad() (bad_user_access_length(), (-EFAULT)) + +#define put_user(x, ptr) __put_user(x, ptr) +#define get_user(x, ptr) __get_user(x, ptr) + +#define copy_to_user(to, from, n) (memcpy(to, from, n), 0) +#define copy_from_user(to, from, n) (memcpy(to, from, n), 0) + +#define __copy_to_user(to, from, n) (copy_to_user(to, from, n)) +#define __copy_from_user(to, from, n) (copy_from_user(to, from, n)) +#define __copy_to_user_inatomic(to, from, n) (__copy_to_user(to, from, n)) +#define __copy_from_user_inatomic(to, from, n) (__copy_from_user(to, from, n)) + +#define __clear_user(addr, n) (memset((void *)addr, 0, n), 0) + +static inline unsigned long clear_user(void *addr, unsigned long size) +{ + if (access_ok(VERIFY_WRITE, addr, size)) + size = __clear_user(addr, size); + return size; +} + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + + +extern long strncpy_from_user(char *dst, const char __user *src, long count); +extern long strnlen_user(const char __user *src, long count); +extern long __strncpy_from_user(char *dst, const char __user *src, long count); + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* _ASM_MICROBLAZE_UACCESS_H */ diff --git a/arch/microblaze/lib/uaccess.c b/arch/microblaze/lib/uaccess.c new file mode 100644 index 0000000..8eb9df5 --- /dev/null +++ b/arch/microblaze/lib/uaccess.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include + +#include + +long strnlen_user(const char __user *src, long count) +{ + return strlen(src) + 1; +} + +#define __do_strncpy_from_user(dst, src, count, res) \ + do { \ + char *tmp; \ + strncpy(dst, src, count); \ + for (tmp = dst; *tmp && count > 0; tmp++, count--) \ + ; \ + res = (tmp - dst); \ + } while (0) + +long __strncpy_from_user(char *dst, const char __user *src, long count) +{ + long res; + __do_strncpy_from_user(dst, src, count, res); + return res; +} + +long strncpy_from_user(char *dst, const char __user *src, long count) +{ + long res = -EFAULT; + if (access_ok(VERIFY_READ, src, 1)) + __do_strncpy_from_user(dst, src, count, res); + return res; +} -- cgit v0.10.2 From ecc6dfc8adfc76d323c513bc88cb260344c11139 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:24 +0100 Subject: microblaze_v8: heartbeat file Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c new file mode 100644 index 0000000..1bdf202 --- /dev/null +++ b/arch/microblaze/kernel/heartbeat.c @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include + +#include +#include +#include + +static unsigned int base_addr; + +void heartbeat(void) +{ + static unsigned int cnt, period, dist; + + if (base_addr) { + if (cnt == 0 || cnt == dist) + out_be32(base_addr, 1); + else if (cnt == 7 || cnt == dist + 7) + out_be32(base_addr, 0); + + if (++cnt > period) { + cnt = 0; + /* + * The hyperbolic function below modifies the heartbeat + * period length in dependency of the current (5min) + * load. It goes through the points f(0)=126, f(1)=86, + * f(5)=51, f(inf)->30. + */ + period = ((672 << FSHIFT) / (5 * avenrun[0] + + (7 << FSHIFT))) + 30; + dist = period / 4; + } + } +} + +void setup_heartbeat(void) +{ + struct device_node *gpio = NULL; + int j; + char *gpio_list[] = { + "xlnx,xps-gpio-1.00.a", + "xlnx,opb-gpio-1.00.a", + NULL + }; + + for (j = 0; gpio_list[j] != NULL; j++) { + gpio = of_find_compatible_node(NULL, NULL, gpio_list[j]); + if (gpio) + break; + } + + base_addr = *(int *) of_get_property(gpio, "reg", NULL); + base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE); + printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr); + + if (*(int *) of_get_property(gpio, "xlnx,is-bidir", NULL)) + out_be32(base_addr + 4, 0); /* GPIO is configured as output */ +} -- cgit v0.10.2 From ec9f91018408617d32dc189cc5e6d030351270c5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:24 +0100 Subject: microblaze_v8: setup.c, setup.h - system setting Reviewed-by: Ingo Molnar Reviewed-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h new file mode 100644 index 0000000..9b98e8e --- /dev/null +++ b/arch/microblaze/include/asm/setup.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2007-2008 Michal Simek + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SETUP_H +#define _ASM_MICROBLAZE_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +# ifndef __ASSEMBLY__ + +# ifdef __KERNEL__ +extern unsigned int boot_cpuid; /* move to smp.h */ + +extern char cmd_line[COMMAND_LINE_SIZE]; +# endif/* __KERNEL__ */ + +void early_printk(const char *fmt, ...); + +int setup_early_printk(char *opt); +void disable_early_printk(void); + +void heartbeat(void); +void setup_heartbeat(void); + +unsigned long long sched_clock(void); + +void time_init(void); +void init_IRQ(void); +void machine_early_init(const char *cmdline, unsigned int ram, + unsigned int fdt); + +void machine_restart(char *cmd); +void machine_shutdown(void); +void machine_halt(void); +void machine_power_off(void); + +# endif /* __ASSEMBLY__ */ +#endif /* _ASM_MICROBLAZE_SETUP_H */ diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c new file mode 100644 index 0000000..eb6b417 --- /dev/null +++ b/arch/microblaze/kernel/setup.c @@ -0,0 +1,199 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +DEFINE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */ +DEFINE_PER_CPU(unsigned int, KM); /* Kernel/user mode */ +DEFINE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */ +DEFINE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ +DEFINE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ + +unsigned int boot_cpuid; +char cmd_line[COMMAND_LINE_SIZE]; + +void __init setup_arch(char **cmdline_p) +{ +#ifdef CONFIG_CMDLINE_FORCE + strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); +#endif + *cmdline_p = cmd_line; + + console_verbose(); + + unflatten_device_tree(); + + /* NOTE I think that this function is not necessary to call */ + /* irq_early_init(); */ + setup_cpuinfo(); + + __invalidate_icache_all(); + __enable_icache(); + + __invalidate_dcache_all(); + __enable_dcache(); + + panic_timeout = 120; + + setup_memory(); + +#if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER) + printk(KERN_NOTICE "Self modified code enable\n"); +#endif + +#ifdef CONFIG_VT +#if defined(CONFIG_XILINX_CONSOLE) + conswitchp = &xil_con; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif +} + +#ifdef CONFIG_MTD_UCLINUX +/* Handle both romfs and cramfs types, without generating unnecessary + code (ie no point checking for CRAMFS if it's not even enabled) */ +inline unsigned get_romfs_len(unsigned *addr) +{ +#ifdef CONFIG_ROMFS_FS + if (memcmp(&addr[0], "-rom1fs-", 8) == 0) /* romfs */ + return be32_to_cpu(addr[2]); +#endif + +#ifdef CONFIG_CRAMFS + if (addr[0] == le32_to_cpu(0x28cd3d45)) /* cramfs */ + return le32_to_cpu(addr[1]); +#endif + return 0; +} +#endif /* CONFIG_MTD_UCLINUX_EBSS */ + +void __init machine_early_init(const char *cmdline, unsigned int ram, + unsigned int fdt) +{ + unsigned long *src, *dst = (unsigned long *)0x0; + +/* clearing bss section */ + memset(__bss_start, 0, __bss_stop-__bss_start); + memset(_ssbss, 0, _esbss-_ssbss); + + /* + * Copy command line passed from bootloader, or use default + * if none provided, or forced + */ +#ifndef CONFIG_CMDLINE_BOOL + if (cmdline && cmdline[0] != '\0') + strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE); +#endif + +/* initialize device tree for usage in early_printk */ + early_init_devtree((void *)_fdt_start); + +#ifdef CONFIG_EARLY_PRINTK + setup_early_printk(NULL); +#endif + + early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt); + printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt); + +#ifdef CONFIG_MTD_UCLINUX + { + int size; + unsigned int romfs_base; + romfs_base = (ram ? ram : (unsigned int)&__init_end); + /* if CONFIG_MTD_UCLINUX_EBSS is defined, assume ROMFS is at the + * end of kernel, which is ROMFS_LOCATION defined above. */ + size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base)); + early_printk("Found romfs @ 0x%08x (0x%08x)\n", + romfs_base, size); + early_printk("#### klimit %p ####\n", klimit); + BUG_ON(size < 0); /* What else can we do? */ + + /* Use memmove to handle likely case of memory overlap */ + early_printk("Moving 0x%08x bytes from 0x%08x to 0x%08x\n", + size, romfs_base, (unsigned)&_ebss); + memmove(&_ebss, (int *)romfs_base, size); + + /* update klimit */ + klimit += PAGE_ALIGN(size); + early_printk("New klimit: 0x%08x\n", (unsigned)klimit); + } +#endif + + for (src = __ivt_start; src < __ivt_end; src++, dst++) + *dst = *src; + + /* Initialize global data */ + per_cpu(KM, 0) = 0x1; /* We start in kernel mode */ + per_cpu(CURRENT_SAVE, 0) = (unsigned long)current; +} + +#ifdef CONFIG_DEBUG_FS +struct dentry *of_debugfs_root; + +static int microblaze_debugfs_init(void) +{ + of_debugfs_root = debugfs_create_dir("microblaze", NULL); + + return of_debugfs_root == NULL; +} +arch_initcall(microblaze_debugfs_init); +#endif + +void machine_restart(char *cmd) +{ + printk(KERN_NOTICE "Machine restart...\n"); + dump_stack(); + while (1) + ; +} + +void machine_shutdown(void) +{ + printk(KERN_NOTICE "Machine shutdown...\n"); + while (1) + ; +} + +void machine_halt(void) +{ + printk(KERN_NOTICE "Machine halt...\n"); + while (1) + ; +} + +void machine_power_off(void) +{ + printk(KERN_NOTICE "Machine power off...\n"); + while (1) + ; +} -- cgit v0.10.2 From c47f10baa0bd7e3de6b7072cfdcafef58f4147f5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:25 +0100 Subject: microblaze_v8: asm-offsets.c Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c new file mode 100644 index 0000000..38e1a2e --- /dev/null +++ b/arch/microblaze/kernel/asm-offsets.c @@ -0,0 +1,115 @@ +/* + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +int main(int argc, char *argv[]) +{ + /* struct pt_regs */ + DEFINE(PT_SIZE, sizeof(struct pt_regs)); + DEFINE(PT_MSR, offsetof(struct pt_regs, msr)); + DEFINE(PT_EAR, offsetof(struct pt_regs, ear)); + DEFINE(PT_ESR, offsetof(struct pt_regs, esr)); + DEFINE(PT_FSR, offsetof(struct pt_regs, fsr)); + DEFINE(PT_PC, offsetof(struct pt_regs, pc)); + DEFINE(PT_R0, offsetof(struct pt_regs, r0)); + DEFINE(PT_R1, offsetof(struct pt_regs, r1)); + DEFINE(PT_R2, offsetof(struct pt_regs, r2)); + DEFINE(PT_R3, offsetof(struct pt_regs, r3)); + DEFINE(PT_R4, offsetof(struct pt_regs, r4)); + DEFINE(PT_R5, offsetof(struct pt_regs, r5)); + DEFINE(PT_R6, offsetof(struct pt_regs, r6)); + DEFINE(PT_R7, offsetof(struct pt_regs, r7)); + DEFINE(PT_R8, offsetof(struct pt_regs, r8)); + DEFINE(PT_R9, offsetof(struct pt_regs, r9)); + DEFINE(PT_R10, offsetof(struct pt_regs, r10)); + DEFINE(PT_R11, offsetof(struct pt_regs, r11)); + DEFINE(PT_R12, offsetof(struct pt_regs, r12)); + DEFINE(PT_R13, offsetof(struct pt_regs, r13)); + DEFINE(PT_R14, offsetof(struct pt_regs, r14)); + DEFINE(PT_R15, offsetof(struct pt_regs, r15)); + DEFINE(PT_R16, offsetof(struct pt_regs, r16)); + DEFINE(PT_R17, offsetof(struct pt_regs, r17)); + DEFINE(PT_R18, offsetof(struct pt_regs, r18)); + DEFINE(PT_R19, offsetof(struct pt_regs, r19)); + DEFINE(PT_R20, offsetof(struct pt_regs, r20)); + DEFINE(PT_R21, offsetof(struct pt_regs, r21)); + DEFINE(PT_R22, offsetof(struct pt_regs, r22)); + DEFINE(PT_R23, offsetof(struct pt_regs, r23)); + DEFINE(PT_R24, offsetof(struct pt_regs, r24)); + DEFINE(PT_R25, offsetof(struct pt_regs, r25)); + DEFINE(PT_R26, offsetof(struct pt_regs, r26)); + DEFINE(PT_R27, offsetof(struct pt_regs, r27)); + DEFINE(PT_R28, offsetof(struct pt_regs, r28)); + DEFINE(PT_R29, offsetof(struct pt_regs, r29)); + DEFINE(PT_R30, offsetof(struct pt_regs, r30)); + DEFINE(PT_R31, offsetof(struct pt_regs, r31)); + DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode)); + BLANK(); + + /* Magic offsets for PTRACE PEEK/POKE etc */ + DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs) + 1); + DEFINE(PT_TEXT_LEN, sizeof(struct pt_regs) + 2); + DEFINE(PT_DATA_ADDR, sizeof(struct pt_regs) + 3); + BLANK(); + + /* struct task_struct */ + DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack)); + + /* struct thread_info */ + DEFINE(TI_TASK, offsetof(struct thread_info, task)); + DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain)); + DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); + DEFINE(TI_STATUS, offsetof(struct thread_info, status)); + DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); + DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count)); + DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit)); + DEFINE(TI_RESTART_BLOCK, offsetof(struct thread_info, restart_block)); + DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context)); + BLANK(); + + /* struct cpu_context */ + DEFINE(CC_R1, offsetof(struct cpu_context, r1)); /* r1 */ + DEFINE(CC_R2, offsetof(struct cpu_context, r2)); + /* dedicated registers */ + DEFINE(CC_R13, offsetof(struct cpu_context, r13)); + DEFINE(CC_R14, offsetof(struct cpu_context, r14)); + DEFINE(CC_R15, offsetof(struct cpu_context, r15)); + DEFINE(CC_R16, offsetof(struct cpu_context, r16)); + DEFINE(CC_R17, offsetof(struct cpu_context, r17)); + DEFINE(CC_R18, offsetof(struct cpu_context, r18)); + /* non-volatile registers */ + DEFINE(CC_R19, offsetof(struct cpu_context, r19)); + DEFINE(CC_R20, offsetof(struct cpu_context, r20)); + DEFINE(CC_R21, offsetof(struct cpu_context, r21)); + DEFINE(CC_R22, offsetof(struct cpu_context, r22)); + DEFINE(CC_R23, offsetof(struct cpu_context, r23)); + DEFINE(CC_R24, offsetof(struct cpu_context, r24)); + DEFINE(CC_R25, offsetof(struct cpu_context, r25)); + DEFINE(CC_R26, offsetof(struct cpu_context, r26)); + DEFINE(CC_R27, offsetof(struct cpu_context, r27)); + DEFINE(CC_R28, offsetof(struct cpu_context, r28)); + DEFINE(CC_R29, offsetof(struct cpu_context, r29)); + DEFINE(CC_R30, offsetof(struct cpu_context, r30)); + /* special purpose registers */ + DEFINE(CC_MSR, offsetof(struct cpu_context, msr)); + DEFINE(CC_EAR, offsetof(struct cpu_context, ear)); + DEFINE(CC_ESR, offsetof(struct cpu_context, esr)); + DEFINE(CC_FSR, offsetof(struct cpu_context, fsr)); + BLANK(); + + return 0; +} -- cgit v0.10.2 From 6496a23add642b7c9203411bdff3ff761835a80a Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:26 +0100 Subject: microblaze_v8: process and init task function Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/init_task.c b/arch/microblaze/kernel/init_task.c new file mode 100644 index 0000000..48eb9fb --- /dev/null +++ b/arch/microblaze/kernel/init_task.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2009 Michal Simek + * Copyright (C) 2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include + +#include + +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); +EXPORT_SYMBOL(init_mm); + +union thread_union init_thread_union + __attribute__((__section__(".data.init_task"))) = +{ INIT_THREAD_INFO(init_task) }; + +struct task_struct init_task = INIT_TASK(init_task); +EXPORT_SYMBOL(init_task); diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c new file mode 100644 index 0000000..60e9ed7 --- /dev/null +++ b/arch/microblaze/kernel/process.c @@ -0,0 +1,187 @@ +/* + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2008-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +void show_regs(struct pt_regs *regs) +{ + printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode); + printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", + regs->r1, regs->r2, regs->r3, regs->r4); + printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", + regs->r5, regs->r6, regs->r7, regs->r8); + printk(KERN_INFO " r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n", + regs->r9, regs->r10, regs->r11, regs->r12); + printk(KERN_INFO " r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n", + regs->r13, regs->r14, regs->r15, regs->r16); + printk(KERN_INFO " r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n", + regs->r17, regs->r18, regs->r19, regs->r20); + printk(KERN_INFO " r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n", + regs->r21, regs->r22, regs->r23, regs->r24); + printk(KERN_INFO " r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n", + regs->r25, regs->r26, regs->r27, regs->r28); + printk(KERN_INFO " r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n", + regs->r29, regs->r30, regs->r31, regs->pc); + printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", + regs->msr, regs->ear, regs->esr, regs->fsr); + while (1) + ; +} + +void (*pm_idle)(void); +void (*pm_power_off)(void) = NULL; +EXPORT_SYMBOL(pm_power_off); + +static int hlt_counter = 1; + +void disable_hlt(void) +{ + hlt_counter++; +} +EXPORT_SYMBOL(disable_hlt); + +void enable_hlt(void) +{ + hlt_counter--; +} +EXPORT_SYMBOL(enable_hlt); + +static int __init nohlt_setup(char *__unused) +{ + hlt_counter = 1; + return 1; +} +__setup("nohlt", nohlt_setup); + +static int __init hlt_setup(char *__unused) +{ + hlt_counter = 0; + return 1; +} +__setup("hlt", hlt_setup); + +void default_idle(void) +{ + if (!hlt_counter) { + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + local_irq_disable(); + while (!need_resched()) + cpu_sleep(); + local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); + } else + while (!need_resched()) + cpu_relax(); +} + +void cpu_idle(void) +{ + set_thread_flag(TIF_POLLING_NRFLAG); + + /* endless idle loop with no priority at all */ + while (1) { + void (*idle)(void) = pm_idle; + + if (!idle) + idle = default_idle; + + tick_nohz_stop_sched_tick(1); + while (!need_resched()) + idle(); + tick_nohz_restart_sched_tick(); + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + check_pgt_cache(); + } +} + +void flush_thread(void) +{ +} + +/* FIXME - here will be a proposed change -> remove nr parameter */ +int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, + unsigned long unused, + struct task_struct *p, struct pt_regs *regs) +{ + struct pt_regs *childregs = task_pt_regs(p); + struct thread_info *ti = task_thread_info(p); + + *childregs = *regs; + if (user_mode(regs)) + childregs->r1 = usp; + else + childregs->r1 = ((unsigned long) ti) + THREAD_SIZE; + + memset(&ti->cpu_context, 0, sizeof(struct cpu_context)); + ti->cpu_context.r1 = (unsigned long)childregs; + ti->cpu_context.msr = (unsigned long)childregs->msr; + ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8; + + if (clone_flags & CLONE_SETTLS) + ; + + return 0; +} + +/* + * Return saved PC of a blocked thread. + */ +unsigned long thread_saved_pc(struct task_struct *tsk) +{ + struct cpu_context *ctx = + &(((struct thread_info *)(tsk->stack))->cpu_context); + + /* Check whether the thread is blocked in resume() */ + if (in_sched_functions(ctx->r15)) + return (unsigned long)ctx->r15; + else + return ctx->r14; +} + +static void kernel_thread_helper(int (*fn)(void *), void *arg) +{ + fn(arg); + do_exit(-1); +} + +int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) +{ + struct pt_regs regs; + int ret; + + memset(®s, 0, sizeof(regs)); + /* store them in non-volatile registers */ + regs.r5 = (unsigned long)fn; + regs.r6 = (unsigned long)arg; + local_save_flags(regs.msr); + regs.pc = (unsigned long)kernel_thread_helper; + regs.kernel_mode = 1; + + ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + ®s, 0, NULL, NULL); + + return ret; +} + +unsigned long get_wchan(struct task_struct *p) +{ +/* TBD (used by procfs) */ + return 0; +} -- cgit v0.10.2 From 216f03481d2fca7094f5f982a65acfc2ca14fa85 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:27 +0100 Subject: microblaze_v8: delay.h, timex.h Reviewed-by: Ingo Molnar Acked-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/delay.h b/arch/microblaze/include/asm/delay.h new file mode 100644 index 0000000..05b7d39 --- /dev/null +++ b/arch/microblaze/include/asm/delay.h @@ -0,0 +1,72 @@ +/* + * include/asm-microblaze/delay.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2007 John Williams + * Copyright (C) 2006 Atmark Techno, Inc. + */ + +#ifndef _ASM_MICROBLAZE_DELAY_H +#define _ASM_MICROBLAZE_DELAY_H + +extern inline void __delay(unsigned long loops) +{ + asm volatile ("# __delay \n\t" \ + "1: addi %0, %0, -1\t\n" \ + "bneid %0, 1b \t\n" \ + "nop \t\n" + : "=r" (loops) + : "0" (loops)); +} + +/* + * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so + * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32. + * + * The mul instruction gives us loops = (a * b) / 2^32. + * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226 + * because this lets us support a wide range of HZ and + * loops_per_jiffy values without either a or b overflowing 2^32. + * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and + * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280 + * (which corresponds to ~3800 bogomips at HZ = 100). + * -- paulus + */ +#define __MAX_UDELAY (226050910UL/HZ) /* maximum udelay argument */ +#define __MAX_NDELAY (4294967295UL/HZ) /* maximum ndelay argument */ + +extern unsigned long loops_per_jiffy; + +extern inline void __udelay(unsigned int x) +{ + + unsigned long long tmp = + (unsigned long long)x * (unsigned long long)loops_per_jiffy \ + * 226LL; + unsigned loops = tmp >> 32; + +/* + __asm__("mulxuu %0,%1,%2" : "=r" (loops) : + "r" (x), "r" (loops_per_jiffy * 226)); +*/ + __delay(loops); +} + +extern void __bad_udelay(void); /* deliberately undefined */ +extern void __bad_ndelay(void); /* deliberately undefined */ + +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > __MAX_UDELAY ? __bad_udelay() : __udelay((n) * (19 * HZ))) : \ + __udelay((n) * (19 * HZ))) + +#define ndelay(n) (__builtin_constant_p(n) ? \ + ((n) > __MAX_NDELAY ? __bad_ndelay() : __udelay((n) * HZ)) : \ + __udelay((n) * HZ)) + +#define muldiv(a, b, c) (((a)*(b))/(c)) + +#endif /* _ASM_MICROBLAZE_DELAY_H */ diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h new file mode 100644 index 0000000..678525d --- /dev/null +++ b/arch/microblaze/include/asm/timex.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_TIMEX_H +#define _ASM_MICROBLAZE_TIMEX_H + +#define CLOCK_TICK_RATE 1000 /* Timer input freq. */ + +typedef unsigned long cycles_t; + +#define get_cycles() (0) + +#endif /* _ASM_TIMEX_H */ -- cgit v0.10.2 From 2b4384542691fddd309f9324b5a9af976b75e918 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:27 +0100 Subject: microblaze_v8: ptrace support Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h new file mode 100644 index 0000000..f1f0348 --- /dev/null +++ b/arch/microblaze/include/asm/ptrace.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_PTRACE_H +#define _ASM_MICROBLAZE_PTRACE_H + +#ifndef __ASSEMBLY__ +#include + +typedef unsigned long microblaze_reg_t; + +struct pt_regs { + microblaze_reg_t r0; + microblaze_reg_t r1; + microblaze_reg_t r2; + microblaze_reg_t r3; + microblaze_reg_t r4; + microblaze_reg_t r5; + microblaze_reg_t r6; + microblaze_reg_t r7; + microblaze_reg_t r8; + microblaze_reg_t r9; + microblaze_reg_t r10; + microblaze_reg_t r11; + microblaze_reg_t r12; + microblaze_reg_t r13; + microblaze_reg_t r14; + microblaze_reg_t r15; + microblaze_reg_t r16; + microblaze_reg_t r17; + microblaze_reg_t r18; + microblaze_reg_t r19; + microblaze_reg_t r20; + microblaze_reg_t r21; + microblaze_reg_t r22; + microblaze_reg_t r23; + microblaze_reg_t r24; + microblaze_reg_t r25; + microblaze_reg_t r26; + microblaze_reg_t r27; + microblaze_reg_t r28; + microblaze_reg_t r29; + microblaze_reg_t r30; + microblaze_reg_t r31; + microblaze_reg_t pc; + microblaze_reg_t msr; + microblaze_reg_t ear; + microblaze_reg_t esr; + microblaze_reg_t fsr; + int kernel_mode; +}; + +#define kernel_mode(regs) ((regs)->kernel_mode) +#define user_mode(regs) (!kernel_mode(regs)) + +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) + +void show_regs(struct pt_regs *); + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_MICROBLAZE_PTRACE_H */ diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c new file mode 100644 index 0000000..3171e39 --- /dev/null +++ b/arch/microblaze/kernel/ptrace.c @@ -0,0 +1,182 @@ +/* + * `ptrace' system call + * + * Copyright (C) 2008-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2004-2007 John Williams + * + * derived from arch/v850/kernel/ptrace.c + * + * Copyright (C) 2002,03 NEC Electronics Corporation + * Copyright (C) 2002,03 Miles Bader + * + * Derived from arch/mips/kernel/ptrace.c: + * + * Copyright (C) 1992 Ross Biro + * Copyright (C) Linus Torvalds + * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle + * Copyright (C) 1996 David S. Miller + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999 MIPS Technologies, Inc. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* Returns the address where the register at REG_OFFS in P is stashed away. */ +static microblaze_reg_t *reg_save_addr(unsigned reg_offs, + struct task_struct *t) +{ + struct pt_regs *regs; + + /* + * Three basic cases: + * + * (1) A register normally saved before calling the scheduler, is + * available in the kernel entry pt_regs structure at the top + * of the kernel stack. The kernel trap/irq exit path takes + * care to save/restore almost all registers for ptrace'd + * processes. + * + * (2) A call-clobbered register, where the process P entered the + * kernel via [syscall] trap, is not stored anywhere; that's + * OK, because such registers are not expected to be preserved + * when the trap returns anyway (so we don't actually bother to + * test for this case). + * + * (3) A few registers not used at all by the kernel, and so + * normally never saved except by context-switches, are in the + * context switch state. + */ + + /* Register saved during kernel entry (or not available). */ + regs = task_pt_regs(t); + + return (microblaze_reg_t *)((char *)regs + reg_offs); +} + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) +{ + int rval; + unsigned long val = 0; + unsigned long copied; + + switch (request) { + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: + pr_debug("PEEKTEXT/PEEKDATA at %08lX\n", addr); + copied = access_process_vm(child, addr, &val, sizeof(val), 0); + rval = -EIO; + if (copied != sizeof(val)) + break; + rval = put_user(val, (unsigned long *)data); + break; + + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + pr_debug("POKETEXT/POKEDATA to %08lX\n", addr); + rval = 0; + if (access_process_vm(child, addr, &data, sizeof(data), 1) + == sizeof(data)) + break; + rval = -EIO; + break; + + /* Read/write the word at location ADDR in the registers. */ + case PTRACE_PEEKUSR: + case PTRACE_POKEUSR: + pr_debug("PEEKUSR/POKEUSR : 0x%08lx\n", addr); + rval = 0; + if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) { + /* + * Special requests that don't actually correspond + * to offsets in struct pt_regs. + */ + if (addr == PT_TEXT_ADDR) { + val = child->mm->start_code; + } else if (addr == PT_DATA_ADDR) { + val = child->mm->start_data; + } else if (addr == PT_TEXT_LEN) { + val = child->mm->end_code + - child->mm->start_code; + } else { + rval = -EIO; + } + } else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) { + microblaze_reg_t *reg_addr = reg_save_addr(addr, child); + if (request == PTRACE_PEEKUSR) + val = *reg_addr; + else + *reg_addr = data; + } else + rval = -EIO; + + if (rval == 0 && request == PTRACE_PEEKUSR) + rval = put_user(val, (unsigned long *)data); + break; + /* Continue and stop at next (return from) syscall */ + case PTRACE_SYSCALL: + pr_debug("PTRACE_SYSCALL\n"); + case PTRACE_SINGLESTEP: + pr_debug("PTRACE_SINGLESTEP\n"); + /* Restart after a signal. */ + case PTRACE_CONT: + pr_debug("PTRACE_CONT\n"); + rval = -EIO; + if (!valid_signal(data)) + break; + + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + + child->exit_code = data; + pr_debug("wakeup_process\n"); + wake_up_process(child); + rval = 0; + break; + + /* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: + pr_debug("PTRACE_KILL\n"); + rval = 0; + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ + break; + child->exit_code = SIGKILL; + wake_up_process(child); + break; + + case PTRACE_DETACH: /* detach a process that was attached. */ + pr_debug("PTRACE_DETACH\n"); + rval = ptrace_detach(child, data); + break; + default: + /* rval = ptrace_request(child, request, addr, data); noMMU */ + rval = -EIO; + } + return rval; +} + +void ptrace_disable(struct task_struct *child) +{ + /* nothing to do */ +} -- cgit v0.10.2 From 7dcbbb2b17d4ef0d0541708eddfb720e2e422c3b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:28 +0100 Subject: microblaze_v8: IPC support Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/ipc.h b/arch/microblaze/include/asm/ipc.h new file mode 100644 index 0000000..a46e3d9 --- /dev/null +++ b/arch/microblaze/include/asm/ipc.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h new file mode 100644 index 0000000..b056fa4 --- /dev/null +++ b/arch/microblaze/include/asm/ipcbuf.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_IPCBUF_H +#define _ASM_MICROBLAZE_IPCBUF_H + +/* + * The user_ipc_perm structure for microblaze architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm { + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_MICROBLAZE_IPCBUF_H */ diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c new file mode 100644 index 0000000..d90b548 --- /dev/null +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2007 John Williams + * + * Copyright (C) 2006 Atmark Techno, Inc. + * Yasushi SHOJI + * Tetsuya OHKAWA + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +/* + * sys_ipc() is the de-multiplexer for the SysV IPC calls.. + * + * This is really horribly ugly. This will be remove with new toolchain. + */ +asmlinkage int +sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) +{ + int version, ret; + + version = call >> 16; /* hack for backward compatibility */ + call &= 0xffff; + + ret = -EINVAL; + switch (call) { + case SEMOP: + ret = sys_semop(first, (struct sembuf *)ptr, second); + break; + case SEMGET: + ret = sys_semget(first, second, third); + break; + case SEMCTL: + { + union semun fourth; + + if (!ptr) + break; + ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT) + || (get_user(fourth.__pad, (void **)ptr)) ; + if (ret) + break; + ret = sys_semctl(first, second, third, fourth); + break; + } + case MSGSND: + ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third); + break; + case MSGRCV: + switch (version) { + case 0: { + struct ipc_kludge tmp; + + if (!ptr) + break; + ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp)) + ? 0 : -EFAULT) || copy_from_user(&tmp, + (struct ipc_kludge *) ptr, sizeof(tmp)); + if (ret) + break; + ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp, + third); + break; + } + default: + ret = sys_msgrcv(first, (struct msgbuf *) ptr, + second, fifth, third); + break; + } + break; + case MSGGET: + ret = sys_msgget((key_t) first, second); + break; + case MSGCTL: + ret = sys_msgctl(first, second, (struct msqid_ds *) ptr); + break; + case SHMAT: + switch (version) { + default: { + ulong raddr; + ret = access_ok(VERIFY_WRITE, (ulong *) third, + sizeof(ulong)) ? 0 : -EFAULT; + if (ret) + break; + ret = do_shmat(first, (char *) ptr, second, &raddr); + if (ret) + break; + ret = put_user(raddr, (ulong *) third); + break; + } + case 1: /* iBCS2 emulator entry point */ + if (!segment_eq(get_fs(), get_ds())) + break; + ret = do_shmat(first, (char *) ptr, second, + (ulong *) third); + break; + } + break; + case SHMDT: + ret = sys_shmdt((char *)ptr); + break; + case SHMGET: + ret = sys_shmget(first, second, third); + break; + case SHMCTL: + ret = sys_shmctl(first, second, (struct shmid_ds *) ptr); + break; + } + return -EINVAL; +} + +asmlinkage int sys_vfork(struct pt_regs *regs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1, + regs, 0, NULL, NULL); +} + +asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs) +{ + if (!stack) + stack = regs->r1; + return do_fork(flags, stack, regs, 0, NULL, NULL); +} + +asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv, + char __user *__user *envp, struct pt_regs *regs) +{ + int error; + char *filename; + + filename = getname(filenamei); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + error = do_execve(filename, argv, envp, regs); + putname(filename); +out: + return error; +} + +asmlinkage unsigned long +sys_mmap2(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + struct file *file = NULL; + int ret = -EBADF; + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) { + printk(KERN_INFO "no fd in mmap\r\n"); + goto out; + } + } + + down_write(¤t->mm->mmap_sem); + ret = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + if (file) + fput(file); +out: + return ret; +} + +asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, off_t offset) +{ + int err = -EINVAL; + + if (offset & ~PAGE_MASK) { + printk(KERN_INFO "no pagemask in mmap\r\n"); + goto out; + } + + err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); +out: + return err; +} + +/* + * Do a system call from kernel instead of calling sys_execve so we + * end up with proper pt_regs. + */ +int kernel_execve(const char *filename, char *const argv[], char *const envp[]) +{ + register const char *__a __asm__("r5") = filename; + register const void *__b __asm__("r6") = argv; + register const void *__c __asm__("r7") = envp; + register unsigned long __syscall __asm__("r12") = __NR_execve; + register unsigned long __ret __asm__("r3"); + __asm__ __volatile__ ("brki r14, 0x8" + : "=r" (__ret), "=r" (__syscall) + : "1" (__syscall), "r" (__a), "r" (__b), "r" (__c) + : "r4", "r8", "r9", + "r10", "r11", "r14", "cc", "memory"); + return __ret; +} -- cgit v0.10.2 From 65bc60930c32b4831800056c8e0a0571c9b6a0bf Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:29 +0100 Subject: microblaze_v8: traps support Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c new file mode 100644 index 0000000..fbdc533 --- /dev/null +++ b/arch/microblaze/kernel/traps.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include + +#include +#include + +void trap_init(void) +{ + __enable_hw_exceptions(); +} + +void __bad_xchg(volatile void *ptr, int size) +{ + printk(KERN_INFO "xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n", + __builtin_return_address(0), ptr, size); + BUG(); +} +EXPORT_SYMBOL(__bad_xchg); + +static int kstack_depth_to_print = 24; + +static int __init kstack_setup(char *s) +{ + kstack_depth_to_print = strict_strtoul(s, 0, 0); + + return 1; +} +__setup("kstack=", kstack_setup); + +void show_trace(struct task_struct *task, unsigned long *stack) +{ + unsigned long addr; + + if (!stack) + stack = (unsigned long *)&stack; + + printk(KERN_NOTICE "Call Trace: "); +#ifdef CONFIG_KALLSYMS + printk(KERN_NOTICE "\n"); +#endif + while (!kstack_end(stack)) { + addr = *stack++; + /* + * If the address is either in the text segment of the + * kernel, or in the region which contains vmalloc'ed + * memory, it *may* be the address of a calling + * routine; if so, print it so that someone tracing + * down the cause of the crash will be able to figure + * out the call path that was taken. + */ + if (kernel_text_address(addr)) + print_ip_sym(addr); + } + printk(KERN_NOTICE "\n"); + + if (!task) + task = current; + + debug_show_held_locks(task); +} + +void show_stack(struct task_struct *task, unsigned long *sp) +{ + unsigned long *stack; + int i; + + if (sp == NULL) { + if (task) + sp = (unsigned long *) ((struct thread_info *) + (task->stack))->cpu_context.r1; + else + sp = (unsigned long *)&sp; + } + + stack = sp; + + printk(KERN_INFO "\nStack:\n "); + + for (i = 0; i < kstack_depth_to_print; i++) { + if (kstack_end(sp)) + break; + if (i && ((i % 8) == 0)) + printk("\n "); + printk("%08lx ", *sp++); + } + printk("\n"); + show_trace(task, stack); +} + +void dump_stack(void) +{ + show_stack(NULL, NULL); +} +EXPORT_SYMBOL(dump_stack); -- cgit v0.10.2 From a95d0e1602f9f3ab54c7dbc9727bf22095705d1e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:29 +0100 Subject: microblaze_v8: memory inicialization, MMU, TLB Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h new file mode 100644 index 0000000..0e0431d --- /dev/null +++ b/arch/microblaze/include/asm/mmu.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_MMU_H +#define _ASM_MICROBLAZE_MMU_H + +#ifndef __ASSEMBLY__ +typedef struct { + struct vm_list_struct *vmlist; + unsigned long end_brk; +} mm_context_t; +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_MICROBLAZE_MMU_H */ diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h new file mode 100644 index 0000000..150ca01 --- /dev/null +++ b/arch/microblaze/include/asm/mmu_context.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H +#define _ASM_MICROBLAZE_MMU_CONTEXT_H + +# define init_new_context(tsk, mm) ({ 0; }) + +# define enter_lazy_tlb(mm, tsk) do {} while (0) +# define change_mm_context(old, ctx, _pml4) do {} while (0) +# define destroy_context(mm) do {} while (0) +# define deactivate_mm(tsk, mm) do {} while (0) +# define switch_mm(prev, next, tsk) do {} while (0) +# define activate_mm(prev, next) do {} while (0) + +#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */ diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h new file mode 100644 index 0000000..d1dfe37 --- /dev/null +++ b/arch/microblaze/include/asm/tlb.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_TLB_H +#define _ASM_MICROBLAZE_TLB_H + +#define tlb_flush(tlb) do {} while (0) + +#include + +#endif /* _ASM_MICROBLAZE_TLB_H */ diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h new file mode 100644 index 0000000..d7fe762 --- /dev/null +++ b/arch/microblaze/include/asm/tlbflush.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_TLBFLUSH_H +#define _ASM_MICROBLAZE_TLBFLUSH_H + +#define flush_tlb() BUG() +#define flush_tlb_all() BUG() +#define flush_tlb_mm(mm) BUG() +#define flush_tlb_page(vma, addr) BUG() +#define flush_tlb_range(mm, start, end) BUG() +#define flush_tlb_pgtables(mm, start, end) BUG() +#define flush_tlb_kernel_range(start, end) BUG() + +#endif /* _ASM_MICROBLAZE_TLBFLUSH_H */ diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c new file mode 100644 index 0000000..b0c8213 --- /dev/null +++ b/arch/microblaze/mm/init.c @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2007-2008 Michal Simek + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include /* mem_init */ +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +unsigned int __page_offset; +/* EXPORT_SYMBOL(__page_offset); */ + +char *klimit = _end; + +/* + * Initialize the bootmem system and give it all the memory we + * have available. + */ +unsigned int memory_start; +unsigned int memory_end; /* due to mm/nommu.c */ +unsigned int memory_size; + +/* + * paging_init() sets up the page tables - in fact we've already done this. + */ +static void __init paging_init(void) +{ + int i; + unsigned long zones_size[MAX_NR_ZONES]; + + /* + * old: we can DMA to/from any address.put all page into ZONE_DMA + * We use only ZONE_NORMAL + */ + zones_size[ZONE_NORMAL] = max_mapnr; + + /* every other zones are empty */ + for (i = 1; i < MAX_NR_ZONES; i++) + zones_size[i] = 0; + + free_area_init(zones_size); +} + +void __init setup_memory(void) +{ + int i; + unsigned long map_size; + u32 kernel_align_start, kernel_align_size; + + /* Find main memory where is the kernel */ + for (i = 0; i < lmb.memory.cnt; i++) { + memory_start = (u32) lmb.memory.region[i].base; + memory_end = (u32) lmb.memory.region[i].base + + (u32) lmb.memory.region[i].size; + if ((memory_start <= (u32)_text) && + ((u32)_text <= memory_end)) { + memory_size = memory_end - memory_start; + PAGE_OFFSET = memory_start; + printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, " + "size 0x%08x\n", __func__, memory_start, + memory_end, memory_size); + break; + } + } + + if (!memory_start || !memory_end) { + panic("%s: Missing memory setting 0x%08x-0x%08x\n", + __func__, memory_start, memory_end); + } + + /* reservation of region where is the kernel */ + kernel_align_start = PAGE_DOWN((u32)_text); + /* ALIGN can be remove because _end in vmlinux.lds.S is align */ + kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start; + lmb_reserve(kernel_align_start, kernel_align_size); + printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n", + __func__, kernel_align_start, kernel_align_start + + kernel_align_size, kernel_align_size); + + /* + * Kernel: + * start: base phys address of kernel - page align + * end: base phys address of kernel - page align + * + * min_low_pfn - the first page (mm/bootmem.c - node_boot_start) + * max_low_pfn + * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn) + * num_physpages - number of all pages + */ + + /* memory start is from the kernel end (aligned) to higher addr */ + min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */ + /* RAM is assumed contiguous */ + num_physpages = max_mapnr = memory_size >> PAGE_SHIFT; + max_pfn = max_low_pfn = memory_end >> PAGE_SHIFT; + + printk(KERN_INFO "%s: max_mapnr: %#lx\n", __func__, max_mapnr); + printk(KERN_INFO "%s: min_low_pfn: %#lx\n", __func__, min_low_pfn); + printk(KERN_INFO "%s: max_low_pfn: %#lx\n", __func__, max_low_pfn); + + /* + * Find an area to use for the bootmem bitmap. + * We look for the first area which is at least + * 128kB in length (128kB is enough for a bitmap + * for 4GB of memory, using 4kB pages), plus 1 page + * (in case the address isn't page-aligned). + */ + map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)), + min_low_pfn, max_low_pfn); + + lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size); + + /* free bootmem is whole main memory */ + free_bootmem(memory_start, memory_size); + + /* reserve allocate blocks */ + for (i = 0; i < lmb.reserved.cnt; i++) { + pr_debug("reserved %d - 0x%08x-0x%08x\n", i, + (u32) lmb.reserved.region[i].base, + (u32) lmb_size_bytes(&lmb.reserved, i)); + reserve_bootmem(lmb.reserved.region[i].base, + lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT); + } + paging_init(); +} + +void free_init_pages(char *what, unsigned long begin, unsigned long end) +{ + unsigned long addr; + + for (addr = begin; addr < end; addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + init_page_count(virt_to_page(addr)); + memset((void *)addr, 0xcc, PAGE_SIZE); + free_page(addr); + totalram_pages++; + } + printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10); +} + +#ifdef CONFIG_BLK_DEV_INITRD +void free_initrd_mem(unsigned long start, unsigned long end) +{ + int pages = 0; + for (; start < end; start += PAGE_SIZE) { + ClearPageReserved(virt_to_page(start)); + init_page_count(virt_to_page(start)); + free_page(start); + totalram_pages++; + pages++; + } + printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages); +} +#endif + +void free_initmem(void) +{ + free_init_pages("unused kernel memory", + (unsigned long)(&__init_begin), + (unsigned long)(&__init_end)); +} + +/* FIXME from arch/powerpc/mm/mem.c*/ +void show_mem(void) +{ + printk(KERN_NOTICE "%s\n", __func__); +} + +void __init mem_init(void) +{ + high_memory = (void *)__va(memory_end); + /* this will put all memory onto the freelists */ + totalram_pages += free_all_bootmem(); + + printk(KERN_INFO "Memory: %luk/%luk available\n", + (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), + num_physpages << (PAGE_SHIFT-10)); +} + +/* Check against bounds of physical memory */ +int ___range_ok(unsigned long addr, unsigned long size) +{ + return ((addr < memory_start) || + ((addr + size) > memory_end)); +} -- cgit v0.10.2 From 4b87d7a4f91d31f186b9d03434f800863aaf16d2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:30 +0100 Subject: microblaze_v8: page.h, segment.h, unaligned.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h new file mode 100644 index 0000000..7238dcf --- /dev/null +++ b/arch/microblaze/include/asm/page.h @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2008 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * Changes for MMU support: + * Copyright (C) 2007 Xilinx, Inc. All rights reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_PAGE_H +#define _ASM_MICROBLAZE_PAGE_H + +#include +#include + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT (12) +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1))) +#define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1))) + +/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN(addr, size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN(addr, size) _ALIGN_UP(addr, size) + +/* + * PAGE_OFFSET -- the first address of the first page of memory. When not + * using MMU this corresponds to the first free page in physical memory (aligned + * on a page boundary). + */ +extern unsigned int __page_offset; +#define PAGE_OFFSET __page_offset + +#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE) + + +#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE) +#define copy_user_page(vto, vfrom, vaddr, topg) \ + memcpy((vto), (vfrom), PAGE_SIZE) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct page *pgtable_t; +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long ste[64]; } pmd_t; +typedef struct { pmd_t pue[1]; } pud_t; +typedef struct { pud_t pge[1]; } pgd_t; + + +#define pte_val(x) ((x).pte) +#define pgprot_val(x) ((x).pgprot) +#define pmd_val(x) ((x).ste[0]) +#define pud_val(x) ((x).pue[0]) +#define pgd_val(x) ((x).pge[0]) + +#define __pte(x) ((pte_t) { (x) }) +#define __pmd(x) ((pmd_t) { (x) }) +#define __pgd(x) ((pgd_t) { (x) }) +#define __pgprot(x) ((pgprot_t) { (x) }) + +/** + * Conversions for virtual address, physical address, pfn, and struct + * page are defined in the following files. + * + * virt -+ + * | asm-microblaze/page.h + * phys -+ + * | linux/pfn.h + * pfn -+ + * | asm-generic/memory_model.h + * page -+ + * + */ + +extern unsigned long max_low_pfn; +extern unsigned long min_low_pfn; +extern unsigned long max_pfn; + +#define __pa(vaddr) ((unsigned long) (vaddr)) +#define __va(paddr) ((void *) (paddr)) + +#define phys_to_pfn(phys) (PFN_DOWN(phys)) +#define pfn_to_phys(pfn) (PFN_PHYS(pfn)) + +#define virt_to_pfn(vaddr) (phys_to_pfn((__pa(vaddr)))) +#define pfn_to_virt(pfn) __va(pfn_to_phys((pfn))) + +#define virt_to_page(vaddr) (pfn_to_page(virt_to_pfn(vaddr))) +#define page_to_virt(page) (pfn_to_virt(page_to_pfn(page))) + +#define page_to_phys(page) (pfn_to_phys(page_to_pfn(page))) +#define page_to_bus(page) (page_to_phys(page)) +#define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr))) + +extern unsigned int memory_start; +extern unsigned int memory_end; +extern unsigned int memory_size; + +#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_mapnr) + +#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) + +#else +#define tophys(rd, rs) (addik rd, rs, 0) +#define tovirt(rd, rs) (addik rd, rs, 0) +#endif /* __ASSEMBLY__ */ + +#define virt_addr_valid(vaddr) (pfn_valid(virt_to_pfn(vaddr))) + +/* Convert between virtual and physical address for MMU. */ +/* Handle MicroBlaze processor with virtual memory. */ +#define __virt_to_phys(addr) addr +#define __phys_to_virt(addr) addr + +#define TOPHYS(addr) __virt_to_phys(addr) + +#endif /* __KERNEL__ */ + +#include +#include + +#endif /* _ASM_MICROBLAZE_PAGE_H */ diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h new file mode 100644 index 0000000..7f5dcc5 --- /dev/null +++ b/arch/microblaze/include/asm/segment.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2008 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SEGMENT_H +#define _ASM_MICROBLAZE_SEGMENT_H + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +/* + * On Microblaze the fs value is actually the top of the corresponding + * address space. + * + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + * + * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal. + */ +# define KERNEL_DS ((mm_segment_t){0}) +# define USER_DS KERNEL_DS + +# define get_ds() (KERNEL_DS) +# define get_fs() (current_thread_info()->addr_limit) +# define set_fs(x) \ + do { current_thread_info()->addr_limit = (x); } while (0) + +# define segment_eq(a, b) ((a).seg == (b).seg) + +# endif /* __ASSEMBLY__ */ +#endif /* _ASM_MICROBLAZE_SEGMENT_H */ diff --git a/arch/microblaze/include/asm/unaligned.h b/arch/microblaze/include/asm/unaligned.h new file mode 100644 index 0000000..9d66b64 --- /dev/null +++ b/arch/microblaze/include/asm/unaligned.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_UNALIGNED_H +#define _ASM_MICROBLAZE_UNALIGNED_H + +# ifdef __KERNEL__ + +# include +# include + +# define get_unaligned __get_unaligned_be +# define put_unaligned __put_unaligned_be + +# endif /* __KERNEL__ */ +#endif /* _ASM_MICROBLAZE_UNALIGNED_H */ -- cgit v0.10.2 From 9b8a45d92718e473d465d47f20e3eaca98ec63b5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:31 +0100 Subject: microblaze_v8: includes SHM*, msgbuf Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h new file mode 100644 index 0000000..09dd970 --- /dev/null +++ b/arch/microblaze/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _ASM_MICROBLAZE_MSGBUF_H +#define _ASM_MICROBLAZE_MSGBUF_H + +/* + * The msqid64_ds structure for microblaze architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_MICROBLAZE_MSGBUF_H */ diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h new file mode 100644 index 0000000..f829c58 --- /dev/null +++ b/arch/microblaze/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _ASM_MICROBLAZE_SHMBUF_H +#define _ASM_MICROBLAZE_SHMBUF_H + +/* + * The shmid64_ds structure for microblaze architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_MICROBLAZE_SHMBUF_H */ diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h new file mode 100644 index 0000000..9f5fc2b --- /dev/null +++ b/arch/microblaze/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _ASM_MICROBLAZE_SHMPARAM_H +#define _ASM_MICROBLAZE_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_MICROBLAZE_SHMPARAM_H */ -- cgit v0.10.2 From 8c4f92fe02394f7bc4c079d0ab943d4aea893f14 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:32 +0100 Subject: microblaze_v8: bug headers files Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h new file mode 100644 index 0000000..8eb2cdd --- /dev/null +++ b/arch/microblaze/include/asm/bug.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_BUG_H +#define _ASM_MICROBLAZE_BUG_H + +#include +#include + +#endif /* _ASM_MICROBLAZE_BUG_H */ diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h new file mode 100644 index 0000000..f2c6593 --- /dev/null +++ b/arch/microblaze/include/asm/bugs.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_BUGS_H +#define _ASM_MICROBLAZE_BUGS_H + +static inline void check_bugs(void) +{ + /* nothing to do */ +} + +#endif /* _ASM_MICROBLAZE_BUGS_H */ -- cgit v0.10.2 From 6d9c3f20858039d98da30074b487f2059450a9b1 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:32 +0100 Subject: microblaze_v8: definitions of types Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h new file mode 100644 index 0000000..b4df41c --- /dev/null +++ b/arch/microblaze/include/asm/posix_types.h @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_POSIX_TYPES_H +#define _ASM_MICROBLAZE_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef unsigned int __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned int __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char *__kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned int __kernel_old_uid_t; +typedef unsigned int __kernel_old_gid_t; +typedef unsigned int __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d))) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */ diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h new file mode 100644 index 0000000..bebc018 --- /dev/null +++ b/arch/microblaze/include/asm/types.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_TYPES_H +#define _ASM_MICROBLAZE_TYPES_H + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ + +#include + +# ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +# ifdef __KERNEL__ +# define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +# endif/* __KERNEL__ */ +# endif /* __ASSEMBLY__ */ +#endif /* _ASM_MICROBLAZE_TYPES_H */ -- cgit v0.10.2 From 97f34d71a0e7fea3be9c09ff2e80867b57e32aa4 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:33 +0100 Subject: microblaze_v8: ioctl support Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/ioctl.h b/arch/microblaze/include/asm/ioctl.h new file mode 100644 index 0000000..b279fe0 --- /dev/null +++ b/arch/microblaze/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h new file mode 100644 index 0000000..03582b2 --- /dev/null +++ b/arch/microblaze/include/asm/ioctls.h @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_IOCTLS_H +#define _ASM_MICROBLAZE_IOCTLS_H + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +/* Get Pty Number (of pty-mux device) */ +#define TIOCGPTN _IOR('T', 0x30, unsigned int) +#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* _ASM_MICROBLAZE_IOCTLS_H */ -- cgit v0.10.2 From 2c572c2824ca5d96bd22b9366389b75ff3620a13 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:33 +0100 Subject: microblaze_v8: io.h IO operations Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h new file mode 100644 index 0000000..cfab034 --- /dev/null +++ b/arch/microblaze/include/asm/io.h @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_IO_H +#define _ASM_MICROBLAZE_IO_H + +#include +#include +#include +#include + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +static inline unsigned char __raw_readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)addr; +} +static inline unsigned short __raw_readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *)addr; +} +static inline unsigned int __raw_readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *)addr; +} +static inline unsigned long __raw_readq(const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *)addr; +} +static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *)addr = v; +} +static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *)addr = v; +} +static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *)addr = v; +} +static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) +{ + *(volatile unsigned long __force *)addr = v; +} + +/* + * read (readb, readw, readl, readq) and write (writeb, writew, + * writel, writeq) accessors are for PCI and thus littel endian. + * Linux 2.4 for Microblaze had this wrong. + */ +static inline unsigned char readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)addr; +} +static inline unsigned short readw(const volatile void __iomem *addr) +{ + return le16_to_cpu(*(volatile unsigned short __force *)addr); +} +static inline unsigned int readl(const volatile void __iomem *addr) +{ + return le32_to_cpu(*(volatile unsigned int __force *)addr); +} +static inline void writeb(unsigned char v, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *)addr = v; +} +static inline void writew(unsigned short v, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *)addr = cpu_to_le16(v); +} +static inline void writel(unsigned int v, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *)addr = cpu_to_le32(v); +} + +/* ioread and iowrite variants. thease are for now same as __raw_ + * variants of accessors. we might check for endianess in the feature + */ +#define ioread8(addr) __raw_readb((u8 *)(addr)) +#define ioread16(addr) __raw_readw((u16 *)(addr)) +#define ioread32(addr) __raw_readl((u32 *)(addr)) +#define iowrite8(v, addr) __raw_writeb((u8)(v), (u8 *)(addr)) +#define iowrite16(v, addr) __raw_writew((u16)(v), (u16 *)(addr)) +#define iowrite32(v, addr) __raw_writel((u32)(v), (u32 *)(addr)) + +/* These are the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl, the "string" versions + * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions + * inb_p/inw_p/... + * The macros don't do byte-swapping. + */ +#define inb(port) readb((u8 *)((port))) +#define outb(val, port) writeb((val), (u8 *)((unsigned long)(port))) +#define inw(port) readw((u16 *)((port))) +#define outw(val, port) writew((val), (u16 *)((unsigned long)(port))) +#define inl(port) readl((u32 *)((port))) +#define outl(val, port) writel((val), (u32 *)((unsigned long)(port))) + +#define inb_p(port) inb((port)) +#define outb_p(val, port) outb((val), (port)) +#define inw_p(port) inw((port)) +#define outw_p(val, port) outw((val), (port)) +#define inl_p(port) inl((port)) +#define outl_p(val, port) outl((val), (port)) + +#define memset_io(a, b, c) memset((void *)(a), (b), (c)) +#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c)) +#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c)) + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline unsigned long __iomem virt_to_phys(volatile void *address) +{ + return __pa((unsigned long)address); +} + +#define virt_to_bus virt_to_phys + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline void *phys_to_virt(unsigned long address) +{ + return (void *)__va(address); +} + +#define bus_to_virt(a) phys_to_virt(a) + +static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, + unsigned long flags) +{ + return (void *)address; +} + +#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr)) +#define iounmap(addr) ((void)0) +#define ioremap_nocache(physaddr, size) ioremap(physaddr, size) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +/* + * Big Endian + */ +#define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a)) +#define out_be16(a, v) __raw_writew((v), (a)) + +#define in_be32(a) __raw_readl((const void __iomem __force *)(a)) +#define in_be16(a) __raw_readw(a) + +/* + * Little endian + */ + +#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a)); +#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a)) + +#define in_le32(a) __le32_to_cpu(__raw_readl(a)) +#define in_le16(a) __le16_to_cpu(__raw_readw(a)) + +/* Byte ops */ +#define out_8(a, v) __raw_writeb((v), (a)) +#define in_8(a) __raw_readb(a) + +/* FIXME */ +static inline void __iomem *ioport_map(unsigned long port, unsigned int len) +{ + return (void __iomem *) (port); +} + +static inline void ioport_unmap(void __iomem *addr) +{ + /* Nothing to do */ +} + +#endif /* _ASM_MICROBLAZE_IO_H */ -- cgit v0.10.2 From c6087fdc7720e7c5cf3d52fccecb3f73e3d52ac7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:34 +0100 Subject: microblaze_v8: headers for executables format FLAT, ELF Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h new file mode 100644 index 0000000..81337f2 --- /dev/null +++ b/arch/microblaze/include/asm/elf.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_ELF_H +#define _ASM_MICROBLAZE_ELF_H + +/* + * Note there is no "official" ELF designation for Microblaze. + * I've snaffled the value from the microblaze binutils source code + * /binutils/microblaze/include/elf/microblaze.h + */ +#define EM_XILINX_MICROBLAZE 0xbaab +#define ELF_ARCH EM_XILINX_MICROBLAZE + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_XILINX_MICROBLAZE) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 + +#endif /* _ASM_MICROBLAZE_ELF_H */ diff --git a/arch/microblaze/include/asm/flat.h b/arch/microblaze/include/asm/flat.h new file mode 100644 index 0000000..acf0da5 --- /dev/null +++ b/arch/microblaze/include/asm/flat.h @@ -0,0 +1,90 @@ +/* + * uClinux flat-format executables + * + * Copyright (C) 2005 John Williams + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#ifndef _ASM_MICROBLAZE_FLAT_H +#define _ASM_MICROBLAZE_FLAT_H + +#include + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 0 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_set_persistent(relval, p) 0 + +/* + * Microblaze works a little differently from other arches, because + * of the MICROBLAZE_64 reloc type. Here, a 32 bit address is split + * over two instructions, an 'imm' instruction which provides the top + * 16 bits, then the instruction "proper" which provides the low 16 + * bits. + */ + +/* + * Crack open a symbol reference and extract the address to be + * relocated. rp is a potentially unaligned pointer to the + * reference + */ + +static inline unsigned long +flat_get_addr_from_rp(unsigned long *rp, unsigned long relval, + unsigned long flags, unsigned long *persistent) +{ + unsigned long addr; + (void)flags; + + /* Is it a split 64/32 reference? */ + if (relval & 0x80000000) { + /* Grab the two halves of the reference */ + unsigned long val_hi, val_lo; + + val_hi = get_unaligned(rp); + val_lo = get_unaligned(rp+1); + + /* Crack the address out */ + addr = ((val_hi & 0xffff) << 16) + (val_lo & 0xffff); + } else { + /* Get the address straight out */ + addr = get_unaligned(rp); + } + + return addr; +} + +/* + * Insert an address into the symbol reference at rp. rp is potentially + * unaligned. + */ + +static inline void +flat_put_addr_at_rp(unsigned long *rp, unsigned long addr, unsigned long relval) +{ + /* Is this a split 64/32 reloc? */ + if (relval & 0x80000000) { + /* Get the two "halves" */ + unsigned long val_hi = get_unaligned(rp); + unsigned long val_lo = get_unaligned(rp + 1); + + /* insert the address */ + val_hi = (val_hi & 0xffff0000) | addr >> 16; + val_lo = (val_lo & 0xffff0000) | (addr & 0xffff); + + /* store the two halves back into memory */ + put_unaligned(val_hi, rp); + put_unaligned(val_lo, rp+1); + } else { + /* Put it straight in, no messing around */ + put_unaligned(addr, rp); + } +} + +#define flat_get_relocate_addr(rel) (rel & 0x7fffffff) + +#endif /* _ASM_MICROBLAZE_FLAT_H */ -- cgit v0.10.2 From 69b1b7817e68379aa55d4677657135a05a287785 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:35 +0100 Subject: microblaze_v8: dma support Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h new file mode 100644 index 0000000..1733625 --- /dev/null +++ b/arch/microblaze/include/asm/dma-mapping.h @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H +#define _ASM_MICROBLAZE_DMA_MAPPING_H + +#include +#include +#include + +struct scatterlist; + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +/* FIXME */ +static inline int +dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + BUG(); + return 0; +} + +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + BUG(); + return 0; +} + +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + BUG(); +} + +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, int flag) +{ + return NULL; /* consistent_alloc(flag, size, dma_handle); */ +} + +static inline void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + BUG(); +} + +static inline dma_addr_t +dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + return virt_to_bus(ptr); +} + +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + switch (direction) { + case DMA_FROM_DEVICE: + flush_dcache_range((unsigned)dma_addr, + (unsigned)dma_addr + size); + /* Fall through */ + case DMA_TO_DEVICE: + break; + default: + BUG(); + } +} + +#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */ diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h new file mode 100644 index 0000000..0967fa0 --- /dev/null +++ b/arch/microblaze/include/asm/dma.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_DMA_H +#define _ASM_MICROBLAZE_DMA_H + +/* we don't have dma address limit. define it as zero to be + * unlimited. */ +#define MAX_DMA_ADDRESS (0) + +#endif /* _ASM_MICROBLAZE_DMA_H */ diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h new file mode 100644 index 0000000..08ff1d0 --- /dev/null +++ b/arch/microblaze/include/asm/scatterlist.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SCATTERLIST_H +#define _ASM_MICROBLAZE_SCATTERLIST_H + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + dma_addr_t dma_address; + unsigned int offset; + unsigned int length; +}; + +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (~0UL) + +#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */ -- cgit v0.10.2 From 4dbdc9a59656d9166f9baaf8733b73e2ad0c8fa5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:35 +0100 Subject: microblaze_v8: headers for irq Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h new file mode 100644 index 0000000..0f2d6b0 --- /dev/null +++ b/arch/microblaze/include/asm/hardirq.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_HARDIRQ_H +#define _ASM_MICROBLAZE_HARDIRQ_H + +#include +#include +#include +#include +#include + +/* should be defined in each interrupt controller driver */ +extern unsigned int get_irq(struct pt_regs *regs); + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +void ack_bad_irq(unsigned int irq); + +#include /* Standard mappings for irq_cpustat_t above */ + +#endif /* _ASM_MICROBLAZE_HARDIRQ_H */ diff --git a/arch/microblaze/include/asm/hw_irq.h b/arch/microblaze/include/asm/hw_irq.h new file mode 100644 index 0000000..e69de29 diff --git a/arch/microblaze/include/asm/irq_regs.h b/arch/microblaze/include/asm/irq_regs.h new file mode 100644 index 0000000..3dd9c0b --- /dev/null +++ b/arch/microblaze/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h new file mode 100644 index 0000000..dea6564 --- /dev/null +++ b/arch/microblaze/include/asm/irqflags.h @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_IRQFLAGS_H +#define _ASM_MICROBLAZE_IRQFLAGS_H + +#include + +# if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR + +# define local_irq_save(flags) \ + do { \ + asm volatile ("# local_irq_save \n\t" \ + "msrclr %0, %1 \n\t" \ + "nop \n\t" \ + : "=r"(flags) \ + : "i"(MSR_IE) \ + : "memory"); \ + } while (0) + +# define local_irq_disable() \ + do { \ + asm volatile ("# local_irq_disable \n\t" \ + "msrclr r0, %0 \n\t" \ + "nop \n\t" \ + : \ + : "i"(MSR_IE) \ + : "memory"); \ + } while (0) + +# define local_irq_enable() \ + do { \ + asm volatile ("# local_irq_enable \n\t" \ + "msrset r0, %0 \n\t" \ + "nop \n\t" \ + : \ + : "i"(MSR_IE) \ + : "memory"); \ + } while (0) + +# else /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR == 0 */ + +# define local_irq_save(flags) \ + do { \ + register unsigned tmp; \ + asm volatile ("# local_irq_save \n\t" \ + "mfs %0, rmsr \n\t" \ + "nop \n\t" \ + "andi %1, %0, %2 \n\t" \ + "mts rmsr, %1 \n\t" \ + "nop \n\t" \ + : "=r"(flags), "=r" (tmp) \ + : "i"(~MSR_IE) \ + : "memory"); \ + } while (0) + +# define local_irq_disable() \ + do { \ + register unsigned tmp; \ + asm volatile ("# local_irq_disable \n\t" \ + "mfs %0, rmsr \n\t" \ + "nop \n\t" \ + "andi %0, %0, %1 \n\t" \ + "mts rmsr, %0 \n\t" \ + "nop \n\t" \ + : "=r"(tmp) \ + : "i"(~MSR_IE) \ + : "memory"); \ + } while (0) + +# define local_irq_enable() \ + do { \ + register unsigned tmp; \ + asm volatile ("# local_irq_enable \n\t" \ + "mfs %0, rmsr \n\t" \ + "nop \n\t" \ + "ori %0, %0, %1 \n\t" \ + "mts rmsr, %0 \n\t" \ + "nop \n\t" \ + : "=r"(tmp) \ + : "i"(MSR_IE) \ + : "memory"); \ + } while (0) + +# endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */ + +#define local_save_flags(flags) \ + do { \ + asm volatile ("# local_save_flags \n\t" \ + "mfs %0, rmsr \n\t" \ + "nop \n\t" \ + : "=r"(flags) \ + : \ + : "memory"); \ + } while (0) + +#define local_irq_restore(flags) \ + do { \ + asm volatile ("# local_irq_restore \n\t"\ + "mts rmsr, %0 \n\t" \ + "nop \n\t" \ + : \ + : "r"(flags) \ + : "memory"); \ + } while (0) + +static inline int irqs_disabled(void) +{ + unsigned long flags; + + local_save_flags(flags); + return ((flags & MSR_IE) == 0); +} + +#define raw_irqs_disabled irqs_disabled +#define raw_irqs_disabled_flags(flags) ((flags) == 0) + +#endif /* _ASM_MICROBLAZE_IRQFLAGS_H */ -- cgit v0.10.2 From 10713b1d9f4e64468e9b9d38c32eea0814568b92 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:36 +0100 Subject: microblaze_v8: atomic.h bitops.h swab.h byteorder.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h new file mode 100644 index 0000000..a448d94 --- /dev/null +++ b/arch/microblaze/include/asm/atomic.h @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_ATOMIC_H +#define _ASM_MICROBLAZE_ATOMIC_H + +#include +#include /* likely */ +#include /* local_irq_XXX and friends */ + +#define ATOMIC_INIT(i) { (i) } +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = (i)) + +#define atomic_inc(v) (atomic_add_return(1, (v))) +#define atomic_dec(v) (atomic_sub_return(1, (v))) + +#define atomic_add(i, v) (atomic_add_return(i, (v))) +#define atomic_sub(i, v) (atomic_sub_return(i, (v))) + +#define atomic_inc_return(v) (atomic_add_return(1, (v))) +#define atomic_dec_return(v) (atomic_sub_return(1, (v))) + +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) + +#define atomic_inc_not_zero(v) (atomic_add_unless((v), 1, 0)) + +#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + + c = atomic_read(v); + while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) + c = old; + return c != u; +} + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ + unsigned long flags; + + local_irq_save(flags); + *addr &= ~mask; + local_irq_restore(flags); +} + +/** + * atomic_add_return - add and return + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v and returns @i + @v + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long flags; + int val; + + local_irq_save(flags); + val = v->counter; + v->counter = val += i; + local_irq_restore(flags); + + return val; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + return atomic_add_return(-i, v); +} + +/* + * Atomically test *v and decrement if it is greater than 0. + * The function returns the old value of *v minus 1. + */ +static inline int atomic_dec_if_positive(atomic_t *v) +{ + unsigned long flags; + int res; + + local_irq_save(flags); + res = v->counter - 1; + if (res >= 0) + v->counter = res; + local_irq_restore(flags); + + return res; +} + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include + +#endif /* _ASM_MICROBLAZE_ATOMIC_H */ diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h new file mode 100644 index 0000000..d6df1fd --- /dev/null +++ b/arch/microblaze/include/asm/bitops.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_BITOPS_H +#define _ASM_MICROBLAZE_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#include /* swab32 */ +#include /* save_flags */ + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() +#include +#include + +#endif /* _ASM_MICROBLAZE_BITOPS_H */ diff --git a/arch/microblaze/include/asm/byteorder.h b/arch/microblaze/include/asm/byteorder.h new file mode 100644 index 0000000..ce9c587 --- /dev/null +++ b/arch/microblaze/include/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _ASM_MICROBLAZE_BYTEORDER_H +#define _ASM_MICROBLAZE_BYTEORDER_H + +#include + +#endif /* _ASM_MICROBLAZE_BYTEORDER_H */ diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h new file mode 100644 index 0000000..b375d7b --- /dev/null +++ b/arch/microblaze/include/asm/swab.h @@ -0,0 +1,8 @@ +#ifndef _ASM_MICROBLAZE_SWAB_H +#define _ASM_MICROBLAZE_SWAB_H + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +#define __SWAB_64_THRU_32__ +#endif + +#endif /* _ASM_MICROBLAZE_SWAB_H */ -- cgit v0.10.2 From 6a3cece5e5e7e7c0fde769d7cf065fb8aef6e54e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:37 +0100 Subject: microblaze_v8: headers pgalloc.h pgtable.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h new file mode 100644 index 0000000..2a4b354 --- /dev/null +++ b/arch/microblaze/include/asm/pgalloc.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_PGALLOC_H +#define _ASM_MICROBLAZE_PGALLOC_H + +#define check_pgt_cache() do {} while (0) + +#endif /* _ASM_MICROBLAZE_PGALLOC_H */ diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h new file mode 100644 index 0000000..4df31e4 --- /dev/null +++ b/arch/microblaze/include/asm/pgtable.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_PGTABLE_H +#define _ASM_MICROBLAZE_PGTABLE_H + +#include + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#define pgd_present(pgd) (1) /* pages are always present on non MMU */ +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) +#define pmd_offset(a, b) ((void *) 0) + +#define PAGE_NONE __pgprot(0) /* these mean nothing to non MMU */ +#define PAGE_SHARED __pgprot(0) /* these mean nothing to non MMU */ +#define PAGE_COPY __pgprot(0) /* these mean nothing to non MMU */ +#define PAGE_READONLY __pgprot(0) /* these mean nothing to non MMU */ +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to non MMU */ + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#ifndef __ASSEMBLY__ +static inline int pte_file(pte_t pte) { return 0; } +#endif /* __ASSEMBLY__ */ + +#define ZERO_PAGE(vaddr) ({ BUG(); NULL; }) + +#define swapper_pg_dir ((pgd_t *) NULL) + +#define pgtable_cache_init() do {} while (0) + +#define arch_enter_lazy_cpu_mode() do {} while (0) + +#ifndef __ASSEMBLY__ +#include + +void setup_memory(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_MICROBLAZE_PGTABLE_H */ -- cgit v0.10.2 From 4511ec153afd132da9f4308e7db394820eb52129 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:37 +0100 Subject: microblaze_v8: system.h processor.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h new file mode 100644 index 0000000..d8e1543 --- /dev/null +++ b/arch/microblaze/include/asm/processor.h @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2008 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_PROCESSOR_H +#define _ASM_MICROBLAZE_PROCESSOR_H + +#include +#include +#include +#include + +# ifndef __ASSEMBLY__ +/* from kernel/cpu/mb.c */ +extern const struct seq_operations cpuinfo_op; + +# define cpu_relax() barrier() +# define cpu_sleep() do {} while (0) +# define prepare_to_copy(tsk) do {} while (0) + +# endif /* __ASSEMBLY__ */ + +/* + * User space process size: memory size + * + * TASK_SIZE on MMU cpu is usually 1GB. However, on no-MMU arch, both + * user processes and the kernel is on the same memory region. They + * both share the memory space and that is limited by the amount of + * physical memory. thus, we set TASK_SIZE == amount of total memory. + */ +# define TASK_SIZE (0x81000000 - 0x80000000) + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +# define current_text_addr() ({ __label__ _l; _l: &&_l; }) + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. We won't be using it + */ +# define TASK_UNMAPPED_BASE 0 + +/* definition in include/linux/sched.h */ +struct task_struct; + +/* thread_struct is gone. use thread_info instead. */ +struct thread_struct { }; +# define INIT_THREAD { } + +/* Do necessary setup to start up a newly executed thread. */ +static inline void start_thread(struct pt_regs *regs, + unsigned long pc, + unsigned long usp) +{ + regs->pc = pc; + regs->r1 = usp; + regs->kernel_mode = 0; +} + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +/* Free all resources held by a thread. */ +static inline void exit_thread(void) +{ +} + +extern unsigned long thread_saved_pc(struct task_struct *t); + +extern unsigned long get_wchan(struct task_struct *p); + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +# define task_pt_regs(tsk) \ + (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) + +# define KSTK_EIP(tsk) (0) +# define KSTK_ESP(tsk) (0) + +#endif /* _ASM_MICROBLAZE_PROCESSOR_H */ diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h new file mode 100644 index 0000000..c4e3088 --- /dev/null +++ b/arch/microblaze/include/asm/system.h @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SYSTEM_H +#define _ASM_MICROBLAZE_SYSTEM_H + +#include +#include +#include + +struct task_struct; +struct thread_info; + +extern struct task_struct *_switch_to(struct thread_info *prev, + struct thread_info *next); + +#define switch_to(prev, next, last) \ + do { \ + (last) = _switch_to(task_thread_info(prev), \ + task_thread_info(next)); \ + } while (0) + +#define smp_read_barrier_depends() do {} while (0) +#define read_barrier_depends() do {} while (0) + +#define nop() asm volatile ("nop") +#define mb() barrier() +#define rmb() mb() +#define wmb() mb() +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() + +void show_trace(struct task_struct *task, unsigned long *stack); +void __bad_xchg(volatile void *ptr, int size); + +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, + int size) +{ + unsigned long ret; + unsigned long flags; + + switch (size) { + case 1: + local_irq_save(flags); + ret = *(volatile unsigned char *)ptr; + *(volatile unsigned char *)ptr = x; + local_irq_restore(flags); + break; + + case 4: + local_irq_save(flags); + ret = *(volatile unsigned long *)ptr; + *(volatile unsigned long *)ptr = x; + local_irq_restore(flags); + break; + default: + __bad_xchg(ptr, size), ret = 0; + break; + } + + return ret; +} + +void disable_hlt(void); +void enable_hlt(void); +void default_idle(void); + +#define xchg(ptr, x) \ + ((__typeof__(*(ptr))) __xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) + +void free_init_pages(char *what, unsigned long begin, unsigned long end); +void free_initmem(void); +extern char *klimit; +extern void ret_from_fork(void); + +#ifdef CONFIG_DEBUG_FS +extern struct dentry *of_debugfs_root; +#endif + +#define arch_align_stack(x) (x) + +#endif /* _ASM_MICROBLAZE_SYSTEM_H */ -- cgit v0.10.2 From 9981cd94d526a300dbef58048b1d281386b7289c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:38 +0100 Subject: microblaze_v8: clinkage.h linkage.h sections.h kmap_types.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/clinkage.h b/arch/microblaze/include/asm/clinkage.h new file mode 100644 index 0000000..9e21843 --- /dev/null +++ b/arch/microblaze/include/asm/clinkage.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/kmap_types.h b/arch/microblaze/include/asm/kmap_types.h new file mode 100644 index 0000000..4d7e222 --- /dev/null +++ b/arch/microblaze/include/asm/kmap_types.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_KMAP_TYPES_H +#define _ASM_MICROBLAZE_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR, +}; + +#endif /* _ASM_MICROBLAZE_KMAP_TYPES_H */ diff --git a/arch/microblaze/include/asm/linkage.h b/arch/microblaze/include/asm/linkage.h new file mode 100644 index 0000000..3a8e36d --- /dev/null +++ b/arch/microblaze/include/asm/linkage.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_LINKAGE_H +#define _ASM_MICROBLAZE_LINKAGE_H + +#define __ALIGN .align 4 +#define __ALIGN_STR ".align 4" + +#endif /* _ASM_MICROBLAZE_LINKAGE_H */ diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h new file mode 100644 index 0000000..8434a43 --- /dev/null +++ b/arch/microblaze/include/asm/sections.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SECTIONS_H +#define _ASM_MICROBLAZE_SECTIONS_H + +#include + +# ifndef __ASSEMBLY__ +extern char _ssbss[], _esbss[]; +extern unsigned long __ivt_start[], __ivt_end[]; + +# ifdef CONFIG_MTD_UCLINUX +extern char *_ebss; +# endif + +extern u32 _fdt_start[], _fdt_end[]; + +# endif /* !__ASSEMBLY__ */ +#endif /* _ASM_MICROBLAZE_SECTIONS_H */ -- cgit v0.10.2 From fb621f1790b9a14a44162ba02fb6b31479aa7cc4 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:39 +0100 Subject: microblaze_v8: stats headers Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h new file mode 100644 index 0000000..5f18b8a --- /dev/null +++ b/arch/microblaze/include/asm/stat.h @@ -0,0 +1,73 @@ +/* + * Microblaze stat structure + * + * Copyright (C) 2001,02,03 NEC Electronics Corporation + * Copyright (C) 2001,02,03 Miles Bader + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader + */ + +#ifndef _ASM_MICROBLAZE_STAT_H +#define _ASM_MICROBLAZE_STAT_H + +#include + +struct stat { + unsigned int st_dev; + unsigned long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + unsigned int st_uid; + unsigned int st_gid; + unsigned int st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long __unused1; /* unsigned long st_atime_nsec */ + unsigned long st_mtime; + unsigned long __unused2; /* unsigned long st_mtime_nsec */ + unsigned long st_ctime; + unsigned long __unused3; /* unsigned long st_ctime_nsec */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct stat64 { + unsigned long long st_dev; + unsigned long __unused1; + + unsigned long long st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned int st_uid; + unsigned int st_gid; + + unsigned long long st_rdev; + unsigned long __unused3; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* No. of 512-byte blocks allocated */ + unsigned long __unused4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long __unused8; +}; + +#endif /* _ASM_MICROBLAZE_STAT_H */ diff --git a/arch/microblaze/include/asm/statfs.h b/arch/microblaze/include/asm/statfs.h new file mode 100644 index 0000000..0b91fe1 --- /dev/null +++ b/arch/microblaze/include/asm/statfs.h @@ -0,0 +1 @@ +#include -- cgit v0.10.2 From 19d1b40ac5ba821b29fe047512ae9971a31d14c3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:40 +0100 Subject: microblaze_v8: termbits.h termios.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h new file mode 100644 index 0000000..a1b64bc --- /dev/null +++ b/arch/microblaze/include/asm/termbits.h @@ -0,0 +1,203 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_TERMBITS_H +#define _ASM_MICROBLAZE_TERMBITS_H + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ + +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ + +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ + +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ + +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define BOTHER 0010000 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ + +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ + +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ + +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ + +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_MICROBLAZE_TERMBITS_H */ diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h new file mode 100644 index 0000000..102d772 --- /dev/null +++ b/arch/microblaze/include/asm/termios.h @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_TERMIOS_H +#define _ASM_MICROBLAZE_TERMIOS_H + +#include +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* Modem lines */ + +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +/* Line disciplines */ + +#define N_TTY 0 +#define N_SLIP 1 +#define N_MOUSE 2 +#define N_PPP 3 +#define N_STRIP 4 +#define N_AX25 5 +#define N_X25 6 /* X.25 async */ +#define N_6PACK 7 +#define N_MASC 8 /* Reserved for Mobitex module */ +#define N_R3964 9 /* Reserved for Simatic R3964 module */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ +#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */ +#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards + about SMS messages */ +#define N_HDLC 13 /* synchronous HDLC */ +#define N_SYNC_PPP 14 +#define N_HCI 15 /* Bluetooth HCI UART */ + +#ifdef __KERNEL__ + +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_MICROBLAZE_TERMIOS_H */ -- cgit v0.10.2 From 3a5c17b573acd712c849ba447d914dae722483b3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:40 +0100 Subject: microblaze_v8: sigcontext.h siginfo.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/sigcontext.h b/arch/microblaze/include/asm/sigcontext.h new file mode 100644 index 0000000..55873c8 --- /dev/null +++ b/arch/microblaze/include/asm/sigcontext.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SIGCONTEXT_H +#define _ASM_MICROBLAZE_SIGCONTEXT_H + +/* FIXME should be linux/ptrace.h */ +#include + +struct sigcontext { + struct pt_regs regs; + unsigned long oldmask; +}; + +#endif /* _ASM_MICROBLAZE_SIGCONTEXT_H */ diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h new file mode 100644 index 0000000..f162911 --- /dev/null +++ b/arch/microblaze/include/asm/siginfo.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SIGINFO_H +#define _ASM_MICROBLAZE_SIGINFO_H + +#include +#include + +#endif /* _ASM_MICROBLAZE_SIGINFO_H */ -- cgit v0.10.2 From 407f99912bd6e264340dd432c85d4e9c53d34579 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:41 +0100 Subject: microblaze_v8: headers simple files - empty or redirect to asm-generic Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/auxvec.h b/arch/microblaze/include/asm/auxvec.h new file mode 100644 index 0000000..e69de29 diff --git a/arch/microblaze/include/asm/cputable.h b/arch/microblaze/include/asm/cputable.h new file mode 100644 index 0000000..e69de29 diff --git a/arch/microblaze/include/asm/cputime.h b/arch/microblaze/include/asm/cputime.h new file mode 100644 index 0000000..6d68ad7 --- /dev/null +++ b/arch/microblaze/include/asm/cputime.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/div64.h b/arch/microblaze/include/asm/div64.h new file mode 100644 index 0000000..6cd978c --- /dev/null +++ b/arch/microblaze/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/emergency-restart.h b/arch/microblaze/include/asm/emergency-restart.h new file mode 100644 index 0000000..3711bd9 --- /dev/null +++ b/arch/microblaze/include/asm/emergency-restart.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/errno.h b/arch/microblaze/include/asm/errno.h new file mode 100644 index 0000000..4c82b50 --- /dev/null +++ b/arch/microblaze/include/asm/errno.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h new file mode 100644 index 0000000..0b74582 --- /dev/null +++ b/arch/microblaze/include/asm/futex.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/kdebug.h b/arch/microblaze/include/asm/kdebug.h new file mode 100644 index 0000000..6ece1b0 --- /dev/null +++ b/arch/microblaze/include/asm/kdebug.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/local.h b/arch/microblaze/include/asm/local.h new file mode 100644 index 0000000..c11c530 --- /dev/null +++ b/arch/microblaze/include/asm/local.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/mutex.h b/arch/microblaze/include/asm/mutex.h new file mode 100644 index 0000000..ff6101a --- /dev/null +++ b/arch/microblaze/include/asm/mutex.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/percpu.h b/arch/microblaze/include/asm/percpu.h new file mode 100644 index 0000000..06a959d --- /dev/null +++ b/arch/microblaze/include/asm/percpu.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/resource.h b/arch/microblaze/include/asm/resource.h new file mode 100644 index 0000000..04bc4db --- /dev/null +++ b/arch/microblaze/include/asm/resource.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/user.h b/arch/microblaze/include/asm/user.h new file mode 100644 index 0000000..e69de29 diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h new file mode 100644 index 0000000..e69de29 diff --git a/arch/microblaze/include/asm/xor.h b/arch/microblaze/include/asm/xor.h new file mode 100644 index 0000000..c82eb12 --- /dev/null +++ b/arch/microblaze/include/asm/xor.h @@ -0,0 +1 @@ +#include -- cgit v0.10.2 From a1a741e4143a971dafe66f54defdea2ad9a5be5a Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:42 +0100 Subject: microblaze_v8: gpio.h, serial.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/gpio.h b/arch/microblaze/include/asm/gpio.h new file mode 100644 index 0000000..ea04632 --- /dev/null +++ b/arch/microblaze/include/asm/gpio.h @@ -0,0 +1,56 @@ +/* + * Generic GPIO API implementation for PowerPC. + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ASM_POWERPC_GPIO_H +#define __ASM_POWERPC_GPIO_H + +#include +#include + +#ifdef CONFIG_GPIOLIB + +/* + * We don't (yet) implement inlined/rapid versions for on-chip gpios. + * Just call gpiolib. + */ +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +/* + * Not implemented, yet. + */ +static inline int gpio_to_irq(unsigned int gpio) +{ + return -ENOSYS; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + +#endif /* __ASM_POWERPC_GPIO_H */ diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h new file mode 100644 index 0000000..39bfc8c --- /dev/null +++ b/arch/microblaze/include/asm/serial.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2009 Michal Simek + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SERIAL_H +#define _ASM_MICROBLAZE_SERIAL_H + +# define BASE_BAUD (1843200 / 16) + +#endif /* _ASM_MICROBLAZE_SERIAL_H */ -- cgit v0.10.2 From aa683ff145fd92df147e1fef15f17e06a2ae009f Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:42 +0100 Subject: microblaze_v8: namei.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/namei.h b/arch/microblaze/include/asm/namei.h new file mode 100644 index 0000000..61d60b8 --- /dev/null +++ b/arch/microblaze/include/asm/namei.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_NAMEI_H +#define _ASM_MICROBLAZE_NAMEI_H + +#ifdef __KERNEL__ + +/* This dummy routine maybe changed to something useful + * for /usr/gnemul/ emulation stuff. + * Look at asm-sparc/namei.h for details. + */ +#define __emul_prefix() NULL + +#endif /* __KERNEL__ */ + +#endif /* _ASM_MICROBLAZE_NAMEI_H */ -- cgit v0.10.2 From 4115ac8381b528f76f3d08f2a2387408512891c2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:43 +0100 Subject: microblaze_v8: headers files entry.h current.h mman.h registers.h sembuf.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/current.h b/arch/microblaze/include/asm/current.h new file mode 100644 index 0000000..8375ea9 --- /dev/null +++ b/arch/microblaze/include/asm/current.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_CURRENT_H +#define _ASM_MICROBLAZE_CURRENT_H + +# ifndef __ASSEMBLY__ +/* + * Dedicate r31 to keeping the current task pointer + */ +register struct task_struct *current asm("r31"); + +# define get_current() current +# endif /* __ASSEMBLY__ */ + +#endif /* _ASM_MICROBLAZE_CURRENT_H */ diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h new file mode 100644 index 0000000..7f57e42 --- /dev/null +++ b/arch/microblaze/include/asm/entry.h @@ -0,0 +1,35 @@ +/* + * Definitions used by low-level trap handlers + * + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2007 - 2008 PetaLogix + * Copyright (C) 2007 John Williams + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#ifndef _ASM_MICROBLAZE_ENTRY_H +#define _ASM_MICROBLAZE_ENTRY_H + +#include +#include + +/* + * These are per-cpu variables required in entry.S, among other + * places + */ + +#define PER_CPU(var) per_cpu__##var + +# ifndef __ASSEMBLY__ +DECLARE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */ +DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */ +DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */ +DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ +DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ +DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */ +# endif /* __ASSEMBLY__ */ + +#endif /* _ASM_MICROBLAZE_ENTRY_H */ diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h new file mode 100644 index 0000000..4914b13 --- /dev/null +++ b/arch/microblaze/include/asm/mman.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_MMAN_H +#define _ASM_MICROBLAZE_MMAN_H + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* _ASM_MICROBLAZE_MMAN_H */ diff --git a/arch/microblaze/include/asm/registers.h b/arch/microblaze/include/asm/registers.h new file mode 100644 index 0000000..834142d --- /dev/null +++ b/arch/microblaze/include/asm/registers.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2008 Michal Simek + * Copyright (C) 2008 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_REGISTERS_H +#define _ASM_MICROBLAZE_REGISTERS_H + +#define MSR_BE (1<<0) /* 0x001 */ +#define MSR_IE (1<<1) /* 0x002 */ +#define MSR_C (1<<2) /* 0x004 */ +#define MSR_BIP (1<<3) /* 0x008 */ +#define MSR_FSL (1<<4) /* 0x010 */ +#define MSR_ICE (1<<5) /* 0x020 */ +#define MSR_DZ (1<<6) /* 0x040 */ +#define MSR_DCE (1<<7) /* 0x080 */ +#define MSR_EE (1<<8) /* 0x100 */ +#define MSR_EIP (1<<9) /* 0x200 */ +#define MSR_CC (1<<31) + +/* Floating Point Status Register (FSR) Bits */ +#define FSR_IO (1<<4) /* Invalid operation */ +#define FSR_DZ (1<<3) /* Divide-by-zero */ +#define FSR_OF (1<<2) /* Overflow */ +#define FSR_UF (1<<1) /* Underflow */ +#define FSR_DO (1<<0) /* Denormalized operand error */ + +#endif /* _ASM_MICROBLAZE_REGISTERS_H */ diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h new file mode 100644 index 0000000..b804ed7 --- /dev/null +++ b/arch/microblaze/include/asm/sembuf.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SEMBUF_H +#define _ASM_MICROBLAZE_SEMBUF_H + +/* + * The semid64_ds structure for microblaze architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + + +#endif /* _ASM_MICROBLAZE_SEMBUF_H */ -- cgit v0.10.2 From 0a7d800de29ed4e265cfe1a27517c5d51958b94a Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:44 +0100 Subject: microblaze_v8: device.h param.h topology.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h new file mode 100644 index 0000000..c042830 --- /dev/null +++ b/arch/microblaze/include/asm/device.h @@ -0,0 +1,21 @@ +/* + * Arch specific extensions to struct device + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_DEVICE_H +#define _ASM_MICROBLAZE_DEVICE_H + +struct device_node; + +struct dev_archdata { + /* Optional pointer to an OF device node */ + struct device_node *of_node; +}; + +#endif /* _ASM_MICROBLAZE_DEVICE_H */ + + diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h new file mode 100644 index 0000000..8c538a4 --- /dev/null +++ b/arch/microblaze/include/asm/param.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_PARAM_H +#define _ASM_MICROBLAZE_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ /* internal kernel timer frequency */ +#define USER_HZ 100 /* for user interfaces in "ticks" */ +#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ +#endif /* __KERNEL__ */ + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_MICROBLAZE_PARAM_H */ diff --git a/arch/microblaze/include/asm/topology.h b/arch/microblaze/include/asm/topology.h new file mode 100644 index 0000000..96bcea5 --- /dev/null +++ b/arch/microblaze/include/asm/topology.h @@ -0,0 +1,11 @@ +#include + +#ifndef _ASM_MICROBLAZE_TOPOLOGY_H +#define _ASM_MICROBLAZE_TOPOLOGY_H + +struct device_node; +static inline int of_node_to_nid(struct device_node *device) +{ + return 0; +} +#endif /* _ASM_MICROBLAZE_TOPOLOGY_H */ -- cgit v0.10.2 From a9ebdfc5edd1600c21f9ae942a95340ca948c788 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:44 +0100 Subject: microblaze_v8: pool.h socket.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/poll.h b/arch/microblaze/include/asm/poll.h new file mode 100644 index 0000000..c98509d --- /dev/null +++ b/arch/microblaze/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h new file mode 100644 index 0000000..f919b6b --- /dev/null +++ b/arch/microblaze/include/asm/socket.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SOCKET_H +#define _ASM_MICROBLAZE_SOCKET_H + +#include + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 + +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_MICROBLAZE_SOCKET_H */ -- cgit v0.10.2 From 9de8901153ebf8c1070d9aca73c4a98db32abc78 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:45 +0100 Subject: microblaze_v8: fcntl.h sockios.h ucontext.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/fcntl.h b/arch/microblaze/include/asm/fcntl.h new file mode 100644 index 0000000..46ab12d --- /dev/null +++ b/arch/microblaze/include/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h new file mode 100644 index 0000000..9fff57a --- /dev/null +++ b/arch/microblaze/include/asm/sockios.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_SOCKIOS_H +#define _ASM_MICROBLAZE_SOCKIOS_H + +#include + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_MICROBLAZE_SOCKIOS_H */ diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h new file mode 100644 index 0000000..11f6bb3 --- /dev/null +++ b/arch/microblaze/include/asm/ucontext.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_UCONTEXT_H +#define _ASM_MICROBLAZE_UCONTEXT_H + +#include + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _ASM_MICROBLAZE_UCONTEXT_H */ -- cgit v0.10.2 From dd0105a6e9dfd64d73a0aa6f4422f5cb0c743a6c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:46 +0100 Subject: microblaze_v8: unistd.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h new file mode 100644 index 0000000..d9d3903 --- /dev/null +++ b/arch/microblaze/include/asm/unistd.h @@ -0,0 +1,421 @@ +/* + * Copyright (C) 2007-2008 Michal Simek + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_UNISTD_H +#define _ASM_MICROBLAZE_UNISTD_H + +#define __NR_restart_syscall 0 /* ok */ +#define __NR_exit 1 /* ok */ +#define __NR_fork 2 /* not for no MMU - weird */ +#define __NR_read 3 /* ok */ +#define __NR_write 4 /* ok */ +#define __NR_open 5 /* openat */ +#define __NR_close 6 /* ok */ +#define __NR_waitpid 7 /* waitid */ +#define __NR_creat 8 /* openat */ +#define __NR_link 9 /* linkat */ +#define __NR_unlink 10 /* unlinkat */ +#define __NR_execve 11 /* ok */ +#define __NR_chdir 12 /* ok */ +#define __NR_time 13 /* obsolete -> sys_gettimeofday */ +#define __NR_mknod 14 /* mknodat */ +#define __NR_chmod 15 /* fchmodat */ +#define __NR_lchown 16 /* ok */ +#define __NR_break 17 /* don't know */ +#define __NR_oldstat 18 /* remove */ +#define __NR_lseek 19 /* ok */ +#define __NR_getpid 20 /* ok */ +#define __NR_mount 21 /* ok */ +#define __NR_umount 22 /* ok */ /* use only umount2 */ +#define __NR_setuid 23 /* ok */ +#define __NR_getuid 24 /* ok */ +#define __NR_stime 25 /* obsolete -> sys_settimeofday */ +#define __NR_ptrace 26 /* ok */ +#define __NR_alarm 27 /* obsolete -> sys_setitimer */ +#define __NR_oldfstat 28 /* remove */ +#define __NR_pause 29 /* obsolete -> sys_rt_sigtimedwait */ +#define __NR_utime 30 /* obsolete -> sys_utimesat */ +#define __NR_stty 31 /* remove */ +#define __NR_gtty 32 /* remove */ +#define __NR_access 33 /* faccessat */ +/* can be implemented by sys_setpriority */ +#define __NR_nice 34 +#define __NR_ftime 35 /* remove */ +#define __NR_sync 36 /* ok */ +#define __NR_kill 37 /* ok */ +#define __NR_rename 38 /* renameat */ +#define __NR_mkdir 39 /* mkdirat */ +#define __NR_rmdir 40 /* unlinkat */ +#define __NR_dup 41 /* ok */ +#define __NR_pipe 42 /* ok */ +#define __NR_times 43 /* ok */ +#define __NR_prof 44 /* remove */ +#define __NR_brk 45 /* ok -mmu, nommu specific */ +#define __NR_setgid 46 /* ok */ +#define __NR_getgid 47 /* ok */ +#define __NR_signal 48 /* obsolete -> sys_rt_sigaction */ +#define __NR_geteuid 49 /* ok */ +#define __NR_getegid 50 /* ok */ +#define __NR_acct 51 /* add it and then I can disable it */ +#define __NR_umount2 52 /* remove */ +#define __NR_lock 53 /* remove */ +#define __NR_ioctl 54 /* ok */ +#define __NR_fcntl 55 /* ok -> 64bit version*/ +#define __NR_mpx 56 /* remove */ +#define __NR_setpgid 57 /* ok */ +#define __NR_ulimit 58 /* remove */ +#define __NR_oldolduname 59 /* remove */ +#define __NR_umask 60 /* ok */ +#define __NR_chroot 61 /* ok */ +#define __NR_ustat 62 /* obsolete -> statfs64 */ +#define __NR_dup2 63 /* ok */ +#define __NR_getppid 64 /* ok */ +#define __NR_getpgrp 65 /* obsolete -> sys_getpgid */ +#define __NR_setsid 66 /* ok */ +#define __NR_sigaction 67 /* obsolete -> rt_sigaction */ +#define __NR_sgetmask 68 /* obsolete -> sys_rt_sigprocmask */ +#define __NR_ssetmask 69 /* obsolete ->sys_rt_sigprocmask */ +#define __NR_setreuid 70 /* ok */ +#define __NR_setregid 71 /* ok */ +#define __NR_sigsuspend 72 /* obsolete -> rt_sigsuspend */ +#define __NR_sigpending 73 /* obsolete -> sys_rt_sigpending */ +#define __NR_sethostname 74 /* ok */ +#define __NR_setrlimit 75 /* ok */ +#define __NR_getrlimit 76 /* ok Back compatible 2G limited rlimit */ +#define __NR_getrusage 77 /* ok */ +#define __NR_gettimeofday 78 /* ok */ +#define __NR_settimeofday 79 /* ok */ +#define __NR_getgroups 80 /* ok */ +#define __NR_setgroups 81 /* ok */ +#define __NR_select 82 /* obsolete -> sys_pselect7 */ +#define __NR_symlink 83 /* symlinkat */ +#define __NR_oldlstat 84 /* remove */ +#define __NR_readlink 85 /* obsolete -> sys_readlinkat */ +#define __NR_uselib 86 /* remove */ +#define __NR_swapon 87 /* ok */ +#define __NR_reboot 88 /* ok */ +#define __NR_readdir 89 /* remove ? */ +#define __NR_mmap 90 /* obsolete -> sys_mmap2 */ +#define __NR_munmap 91 /* ok - mmu and nommu */ +#define __NR_truncate 92 /* ok or truncate64 */ +#define __NR_ftruncate 93 /* ok or ftruncate64 */ +#define __NR_fchmod 94 /* ok */ +#define __NR_fchown 95 /* ok */ +#define __NR_getpriority 96 /* ok */ +#define __NR_setpriority 97 /* ok */ +#define __NR_profil 98 /* remove */ +#define __NR_statfs 99 /* ok or statfs64 */ +#define __NR_fstatfs 100 /* ok or fstatfs64 */ +#define __NR_ioperm 101 /* remove */ +#define __NR_socketcall 102 /* remove */ +#define __NR_syslog 103 /* ok */ +#define __NR_setitimer 104 /* ok */ +#define __NR_getitimer 105 /* ok */ +#define __NR_stat 106 /* remove */ +#define __NR_lstat 107 /* remove */ +#define __NR_fstat 108 /* remove */ +#define __NR_olduname 109 /* remove */ +#define __NR_iopl 110 /* remove */ +#define __NR_vhangup 111 /* ok */ +#define __NR_idle 112 /* remove */ +#define __NR_vm86old 113 /* remove */ +#define __NR_wait4 114 /* obsolete -> waitid */ +#define __NR_swapoff 115 /* ok */ +#define __NR_sysinfo 116 /* ok */ +#define __NR_ipc 117 /* remove - direct call */ +#define __NR_fsync 118 /* ok */ +#define __NR_sigreturn 119 /* obsolete -> sys_rt_sigreturn */ +#define __NR_clone 120 /* ok */ +#define __NR_setdomainname 121 /* ok */ +#define __NR_uname 122 /* remove */ +#define __NR_modify_ldt 123 /* remove */ +#define __NR_adjtimex 124 /* ok */ +#define __NR_mprotect 125 /* remove */ +#define __NR_sigprocmask 126 /* obsolete -> sys_rt_sigprocmask */ +#define __NR_create_module 127 /* remove */ +#define __NR_init_module 128 /* ok */ +#define __NR_delete_module 129 /* ok */ +#define __NR_get_kernel_syms 130 /* remove */ +#define __NR_quotactl 131 /* ok */ +#define __NR_getpgid 132 /* ok */ +#define __NR_fchdir 133 /* ok */ +#define __NR_bdflush 134 /* remove */ +#define __NR_sysfs 135 /* needed for busybox */ +#define __NR_personality 136 /* ok */ +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 /* ok */ +#define __NR_setfsgid 139 /* ok */ +#define __NR__llseek 140 /* remove only lseek */ +#define __NR_getdents 141 /* ok or getdents64 */ +#define __NR__newselect 142 /* remove */ +#define __NR_flock 143 /* ok */ +#define __NR_msync 144 /* remove */ +#define __NR_readv 145 /* ok */ +#define __NR_writev 146 /* ok */ +#define __NR_getsid 147 /* ok */ +#define __NR_fdatasync 148 /* ok */ +#define __NR__sysctl 149 /* remove */ +#define __NR_mlock 150 /* ok - nommu or mmu */ +#define __NR_munlock 151 /* ok - nommu or mmu */ +#define __NR_mlockall 152 /* ok - nommu or mmu */ +#define __NR_munlockall 153 /* ok - nommu or mmu */ +#define __NR_sched_setparam 154 /* ok */ +#define __NR_sched_getparam 155 /* ok */ +#define __NR_sched_setscheduler 156 /* ok */ +#define __NR_sched_getscheduler 157 /* ok */ +#define __NR_sched_yield 158 /* ok */ +#define __NR_sched_get_priority_max 159 /* ok */ +#define __NR_sched_get_priority_min 160 /* ok */ +#define __NR_sched_rr_get_interval 161 /* ok */ +#define __NR_nanosleep 162 /* ok */ +#define __NR_mremap 163 /* ok - nommu or mmu */ +#define __NR_setresuid 164 /* ok */ +#define __NR_getresuid 165 /* ok */ +#define __NR_vm86 166 /* remove */ +#define __NR_query_module 167 /* ok */ +#define __NR_poll 168 /* obsolete -> sys_ppoll */ +#define __NR_nfsservctl 169 /* ok */ +#define __NR_setresgid 170 /* ok */ +#define __NR_getresgid 171 /* ok */ +#define __NR_prctl 172 /* ok */ +#define __NR_rt_sigreturn 173 /* ok */ +#define __NR_rt_sigaction 174 /* ok */ +#define __NR_rt_sigprocmask 175 /* ok */ +#define __NR_rt_sigpending 176 /* ok */ +#define __NR_rt_sigtimedwait 177 /* ok */ +#define __NR_rt_sigqueueinfo 178 /* ok */ +#define __NR_rt_sigsuspend 179 /* ok */ +#define __NR_pread64 180 /* ok */ +#define __NR_pwrite64 181 /* ok */ +#define __NR_chown 182 /* obsolete -> fchownat */ +#define __NR_getcwd 183 /* ok */ +#define __NR_capget 184 /* ok */ +#define __NR_capset 185 /* ok */ +#define __NR_sigaltstack 186 /* remove */ +#define __NR_sendfile 187 /* ok -> exist 64bit version*/ +#define __NR_getpmsg 188 /* remove */ +/* remove - some people actually want streams */ +#define __NR_putpmsg 189 +/* for noMMU - group with clone -> maybe remove */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* remove - SuS compliant getrlimit */ +#define __NR_mmap2 192 /* ok */ +#define __NR_truncate64 193 /* ok */ +#define __NR_ftruncate64 194 /* ok */ +#define __NR_stat64 195 /* remove _ARCH_WANT_STAT64 */ +#define __NR_lstat64 196 /* remove _ARCH_WANT_STAT64 */ +#define __NR_fstat64 197 /* remove _ARCH_WANT_STAT64 */ +#define __NR_lchown32 198 /* ok - without 32 */ +#define __NR_getuid32 199 /* ok - without 32 */ +#define __NR_getgid32 200 /* ok - without 32 */ +#define __NR_geteuid32 201 /* ok - without 32 */ +#define __NR_getegid32 202 /* ok - without 32 */ +#define __NR_setreuid32 203 /* ok - without 32 */ +#define __NR_setregid32 204 /* ok - without 32 */ +#define __NR_getgroups32 205 /* ok - without 32 */ +#define __NR_setgroups32 206 /* ok - without 32 */ +#define __NR_fchown32 207 /* ok - without 32 */ +#define __NR_setresuid32 208 /* ok - without 32 */ +#define __NR_getresuid32 209 /* ok - without 32 */ +#define __NR_setresgid32 210 /* ok - without 32 */ +#define __NR_getresgid32 211 /* ok - without 32 */ +#define __NR_chown32 212 /* ok - without 32 -obsolete -> fchownat */ +#define __NR_setuid32 213 /* ok - without 32 */ +#define __NR_setgid32 214 /* ok - without 32 */ +#define __NR_setfsuid32 215 /* ok - without 32 */ +#define __NR_setfsgid32 216 /* ok - without 32 */ +#define __NR_pivot_root 217 /* ok */ +#define __NR_mincore 218 /* ok */ +#define __NR_madvise 219 /* ok */ +#define __NR_getdents64 220 /* ok */ +#define __NR_fcntl64 221 /* ok */ +/* 223 is unused */ +#define __NR_gettid 224 /* ok */ +#define __NR_readahead 225 /* ok */ +#define __NR_setxattr 226 /* ok */ +#define __NR_lsetxattr 227 /* ok */ +#define __NR_fsetxattr 228 /* ok */ +#define __NR_getxattr 229 /* ok */ +#define __NR_lgetxattr 230 /* ok */ +#define __NR_fgetxattr 231 /* ok */ +#define __NR_listxattr 232 /* ok */ +#define __NR_llistxattr 233 /* ok */ +#define __NR_flistxattr 234 /* ok */ +#define __NR_removexattr 235 /* ok */ +#define __NR_lremovexattr 236 /* ok */ +#define __NR_fremovexattr 237 /* ok */ +#define __NR_tkill 238 /* ok */ +#define __NR_sendfile64 239 /* ok */ +#define __NR_futex 240 /* ok */ +#define __NR_sched_setaffinity 241 /* ok */ +#define __NR_sched_getaffinity 242 /* ok */ +#define __NR_set_thread_area 243 /* remove */ +#define __NR_get_thread_area 244 /* remove */ +#define __NR_io_setup 245 /* ok */ +#define __NR_io_destroy 246 /* ok */ +#define __NR_io_getevents 247 /* ok */ +#define __NR_io_submit 248 /* ok */ +#define __NR_io_cancel 249 /* ok */ +#define __NR_fadvise64 250 /* remove -> sys_fadvise64_64 */ +/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */ +#define __NR_exit_group 252 /* ok */ +#define __NR_lookup_dcookie 253 /* ok */ +#define __NR_epoll_create 254 /* ok */ +#define __NR_epoll_ctl 255 /* ok */ +#define __NR_epoll_wait 256 /* obsolete -> sys_epoll_pwait */ +#define __NR_remap_file_pages 257 /* only for mmu */ +#define __NR_set_tid_address 258 /* ok */ +#define __NR_timer_create 259 /* ok */ +#define __NR_timer_settime (__NR_timer_create+1) /* 260 */ /* ok */ +#define __NR_timer_gettime (__NR_timer_create+2) /* 261 */ /* ok */ +#define __NR_timer_getoverrun (__NR_timer_create+3) /* 262 */ /* ok */ +#define __NR_timer_delete (__NR_timer_create+4) /* 263 */ /* ok */ +#define __NR_clock_settime (__NR_timer_create+5) /* 264 */ /* ok */ +#define __NR_clock_gettime (__NR_timer_create+6) /* 265 */ /* ok */ +#define __NR_clock_getres (__NR_timer_create+7) /* 266 */ /* ok */ +#define __NR_clock_nanosleep (__NR_timer_create+8) /* 267 */ /* ok */ +#define __NR_statfs64 268 /* ok */ +#define __NR_fstatfs64 269 /* ok */ +#define __NR_tgkill 270 /* ok */ +#define __NR_utimes 271 /* obsolete -> sys_futimesat */ +#define __NR_fadvise64_64 272 /* ok */ +#define __NR_vserver 273 /* ok */ +#define __NR_mbind 274 /* only for mmu */ +#define __NR_get_mempolicy 275 /* only for mmu */ +#define __NR_set_mempolicy 276 /* only for mmu */ +#define __NR_mq_open 277 /* ok */ +#define __NR_mq_unlink (__NR_mq_open+1) /* 278 */ /* ok */ +#define __NR_mq_timedsend (__NR_mq_open+2) /* 279 */ /* ok */ +#define __NR_mq_timedreceive (__NR_mq_open+3) /* 280 */ /* ok */ +#define __NR_mq_notify (__NR_mq_open+4) /* 281 */ /* ok */ +#define __NR_mq_getsetattr (__NR_mq_open+5) /* 282 */ /* ok */ +#define __NR_kexec_load 283 /* ok */ +#define __NR_waitid 284 /* ok */ +/* #define __NR_sys_setaltroot 285 */ +#define __NR_add_key 286 /* ok */ +#define __NR_request_key 287 /* ok */ +#define __NR_keyctl 288 /* ok */ +#define __NR_ioprio_set 289 /* ok */ +#define __NR_ioprio_get 290 /* ok */ +#define __NR_inotify_init 291 /* ok */ +#define __NR_inotify_add_watch 292 /* ok */ +#define __NR_inotify_rm_watch 293 /* ok */ +#define __NR_migrate_pages 294 /* mmu */ +#define __NR_openat 295 /* ok */ +#define __NR_mkdirat 296 /* ok */ +#define __NR_mknodat 297 /* ok */ +#define __NR_fchownat 298 /* ok */ +#define __NR_futimesat 299 /* obsolete -> sys_utimesat */ +#define __NR_fstatat64 300 /* stat64 */ +#define __NR_unlinkat 301 /* ok */ +#define __NR_renameat 302 /* ok */ +#define __NR_linkat 303 /* ok */ +#define __NR_symlinkat 304 /* ok */ +#define __NR_readlinkat 305 /* ok */ +#define __NR_fchmodat 306 /* ok */ +#define __NR_faccessat 307 /* ok */ +#define __NR_pselect6 308 /* obsolete -> sys_pselect7 */ +#define __NR_ppoll 309 /* ok */ +#define __NR_unshare 310 /* ok */ +#define __NR_set_robust_list 311 /* ok */ +#define __NR_get_robust_list 312 /* ok */ +#define __NR_splice 313 /* ok */ +#define __NR_sync_file_range 314 /* ok */ +#define __NR_tee 315 /* ok */ +#define __NR_vmsplice 316 /* ok */ +#define __NR_move_pages 317 /* mmu */ +#define __NR_getcpu 318 /* ok */ +#define __NR_epoll_pwait 319 /* ok */ +#define __NR_utimensat 320 /* ok */ +#define __NR_signalfd 321 /* ok */ +#define __NR_timerfd_create 322 /* ok */ +#define __NR_eventfd 323 /* ok */ +#define __NR_fallocate 324 /* ok */ +#define __NR_semtimedop 325 /* ok - semaphore group */ +#define __NR_timerfd_settime 326 /* ok */ +#define __NR_timerfd_gettime 327 /* ok */ +/* sysv ipc syscalls */ +#define __NR_semctl 328 /* ok */ +#define __NR_semget 329 /* ok */ +#define __NR_semop 330 /* ok */ +#define __NR_msgctl 331 /* ok */ +#define __NR_msgget 332 /* ok */ +#define __NR_msgrcv 333 /* ok */ +#define __NR_msgsnd 334 /* ok */ +#define __NR_shmat 335 /* ok */ +#define __NR_shmctl 336 /* ok */ +#define __NR_shmdt 337 /* ok */ +#define __NR_shmget 338 /* ok */ + + +#define __NR_signalfd4 339 /* new */ +#define __NR_eventfd2 340 /* new */ +#define __NR_epoll_create1 341 /* new */ +#define __NR_dup3 342 /* new */ +#define __NR_pipe2 343 /* new */ +#define __NR_inotify_init1 344 /* new */ +#define __NR_socket 345 /* new */ +#define __NR_socketpair 346 /* new */ +#define __NR_bind 347 /* new */ +#define __NR_listen 348 /* new */ +#define __NR_accept 349 /* new */ +#define __NR_connect 350 /* new */ +#define __NR_getsockname 351 /* new */ +#define __NR_getpeername 352 /* new */ +#define __NR_sendto 353 /* new */ +#define __NR_send 354 /* new */ +#define __NR_recvfrom 355 /* new */ +#define __NR_recv 356 /* new */ +#define __NR_setsockopt 357 /* new */ +#define __NR_getsockopt 358 /* new */ +#define __NR_shutdown 359 /* new */ +#define __NR_sendmsg 360 /* new */ +#define __NR_recvmsg 361 /* new */ +#define __NR_accept04 362 /* new */ + +#define __NR_syscalls 363 + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#define __ARCH_WANT_IPC_PARSE_VERSION +/* #define __ARCH_WANT_OLD_READDIR */ +/* #define __ARCH_WANT_OLD_STAT */ +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */ +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */ + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_MICROBLAZE_UNISTD_H */ -- cgit v0.10.2 From 4684dadec6ca3f310b0d9ff1860ca6b6f11ffd2d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:47 +0100 Subject: microblaze_v8: string.h thread_info.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/string.h b/arch/microblaze/include/asm/string.h new file mode 100644 index 0000000..f7728c9 --- /dev/null +++ b/arch/microblaze/include/asm/string.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_STRING_H +#define _ASM_MICROBLAZE_STRING_H + +#ifndef __KERNEL__ + +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMMOVE + +extern void *memset(void *, int, __kernel_size_t); +extern void *memcpy(void *, const void *, __kernel_size_t); +extern void *memmove(void *, const void *, __kernel_size_t); + +#endif /* __KERNEL__ */ + +#endif /* _ASM_MICROBLAZE_STRING_H */ diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h new file mode 100644 index 0000000..4c3943e --- /dev/null +++ b/arch/microblaze/include/asm/thread_info.h @@ -0,0 +1,159 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_THREAD_INFO_H +#define _ASM_MICROBLAZE_THREAD_INFO_H + +#ifdef __KERNEL__ + +/* we have 8k stack */ +#define THREAD_SHIFT 13 +#define THREAD_SIZE (1 << THREAD_SHIFT) +#define THREAD_SIZE_ORDER 1 + +#ifndef __ASSEMBLY__ +# include +# include +# include + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants + * must also be changed + */ + +struct cpu_context { + __u32 r1; /* stack pointer */ + __u32 r2; + /* dedicated registers */ + __u32 r13; + __u32 r14; + __u32 r15; + __u32 r16; + __u32 r17; + __u32 r18; + /* non-volatile registers */ + __u32 r19; + __u32 r20; + __u32 r21; + __u32 r22; + __u32 r23; + __u32 r24; + __u32 r25; + __u32 r26; + __u32 r27; + __u32 r28; + __u32 r29; + __u32 r30; + /* r31 is used as current task pointer */ + /* special purpose registers */ + __u32 msr; + __u32 ear; + __u32 esr; + __u32 fsr; +}; + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long status; /* thread-synchronous flags */ + __u32 cpu; /* current CPU */ + __s32 preempt_count; /* 0 => preemptable,< 0 => BUG*/ + mm_segment_t addr_limit; /* thread address space */ + struct restart_block restart_block; + + struct cpu_context cpu_context; +}; + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + register unsigned long sp asm("r1"); + + return (struct thread_info *)(sp & ~(THREAD_SIZE-1)); +} + +/* thread information allocation */ +#endif /* __ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * thread information flags + * - these are process state flags that various assembly files may + * need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +/* restore singlestep on return to user mode */ +#define TIF_SINGLESTEP 4 +#define TIF_IRET 5 /* return with iret */ +#define TIF_MEMDIE 6 +#define TIF_FREEZE 14 /* Freezing for suspend */ + +/* FIXME change in entry.S */ +#define TIF_KERNEL_TRACE 8 /* kernel trace active */ + +/* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_POLLING_NRFLAG 16 + +#define _TIF_SYSCALL_TRACE (1< Date: Fri, 27 Mar 2009 14:25:47 +0100 Subject: microblaze_v8: Kbuild file Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild new file mode 100644 index 0000000..31820df --- /dev/null +++ b/arch/microblaze/include/asm/Kbuild @@ -0,0 +1,26 @@ +include include/asm-generic/Kbuild.asm + +header-y += auxvec.h +header-y += errno.h +header-y += fcntl.h +header-y += ioctl.h +header-y += ioctls.h +header-y += ipcbuf.h +header-y += linkage.h +header-y += msgbuf.h +header-y += poll.h +header-y += resource.h +header-y += sembuf.h +header-y += shmbuf.h +header-y += sigcontext.h +header-y += siginfo.h +header-y += socket.h +header-y += sockios.h +header-y += statfs.h +header-y += stat.h +header-y += termbits.h +header-y += ucontext.h + +unifdef-y += cputable.h +unifdef-y += elf.h +unifdef-y += termios.h -- cgit v0.10.2 From 36174f4e8742faed7da08e6110f134cf87dc03df Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:48 +0100 Subject: microblaze_v8: pci headers Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h new file mode 100644 index 0000000..7ad28f6 --- /dev/null +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -0,0 +1 @@ +#include diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h new file mode 100644 index 0000000..ca03794 --- /dev/null +++ b/arch/microblaze/include/asm/pci.h @@ -0,0 +1 @@ +#include -- cgit v0.10.2 From 3be100114a352bb4b0eee5b6a847cf4f34ce28b1 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:49 +0100 Subject: microblaze_v8: syscalls.h Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h new file mode 100644 index 0000000..9cb4ff0 --- /dev/null +++ b/arch/microblaze/include/asm/syscalls.h @@ -0,0 +1,45 @@ +#ifndef __ASM_MICROBLAZE_SYSCALLS_H +#define __ASM_MICROBLAZE_SYSCALLS_H +#ifdef __KERNEL__ + +#include +#include +#include +#include + +/* FIXME will be removed */ +asmlinkage int sys_ipc(uint call, int first, int second, + int third, void *ptr, long fifth); + +struct pt_regs; +asmlinkage int sys_vfork(struct pt_regs *regs); +asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs); +asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv, + char __user *__user *envp, struct pt_regs *regs); + +asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff); + +asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, off_t offset); + +/* from signal.c */ +asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs); + +asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, + struct pt_regs *regs); + +asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act, + struct old_sigaction *oact); + +asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, + struct pt_regs *regs); + +asmlinkage int sys_sigreturn(struct pt_regs *regs); + +asmlinkage int sys_rt_sigreturn(struct pt_regs *regs); + +#endif /* __KERNEL__ */ +#endif /* __ASM_MICROBLAZE_SYSCALLS_H */ -- cgit v0.10.2 From eedbdab99fffb8ed71cac75a722088b8ace2583c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:49 +0100 Subject: microblaze_v8: Interrupt handling and timer support Reviewed-by: Thomas Gleixner Reviewed-by: Ingo Molnar Reviewed-by: Stephen Neuendorffer Acked-by: John Linn Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h new file mode 100644 index 0000000..db515de --- /dev/null +++ b/arch/microblaze/include/asm/irq.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _ASM_MICROBLAZE_IRQ_H +#define _ASM_MICROBLAZE_IRQ_H + +#define NR_IRQS 32 + +#include + +extern unsigned int nr_irq; + +#define NO_IRQ (-1) + +static inline int irq_canonicalize(int irq) +{ + return irq; +} + +struct pt_regs; +extern void do_IRQ(struct pt_regs *regs); + +/* irq_of_parse_and_map - Parse and Map an interrupt into linux virq space + * @device: Device node of the device whose interrupt is to be mapped + * @index: Index of the interrupt to map + * + * This function is a wrapper that chains of_irq_map_one() and + * irq_create_of_mapping() to make things easier to callers + */ +struct device_node; +extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index); + +/** FIXME - not implement + * irq_dispose_mapping - Unmap an interrupt + * @virq: linux virq number of the interrupt to unmap + */ +static inline void irq_dispose_mapping(unsigned int virq) +{ + return; +} + +#endif /* _ASM_MICROBLAZE_IRQ_H */ diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c new file mode 100644 index 0000000..a69d3e3 --- /dev/null +++ b/arch/microblaze/kernel/intc.c @@ -0,0 +1,172 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include + +#include +#include + +#ifdef CONFIG_SELFMOD_INTC +#include +#define INTC_BASE BARRIER_BASE_ADDR +#else +static unsigned int intc_baseaddr; +#define INTC_BASE intc_baseaddr +#endif + +unsigned int nr_irq; + +/* No one else should require these constants, so define them locally here. */ +#define ISR 0x00 /* Interrupt Status Register */ +#define IPR 0x04 /* Interrupt Pending Register */ +#define IER 0x08 /* Interrupt Enable Register */ +#define IAR 0x0c /* Interrupt Acknowledge Register */ +#define SIE 0x10 /* Set Interrupt Enable bits */ +#define CIE 0x14 /* Clear Interrupt Enable bits */ +#define IVR 0x18 /* Interrupt Vector Register */ +#define MER 0x1c /* Master Enable Register */ + +#define MER_ME (1<<0) +#define MER_HIE (1<<1) + +static void intc_enable_or_unmask(unsigned int irq) +{ + pr_debug("enable_or_unmask: %d\n", irq); + out_be32(INTC_BASE + SIE, 1 << irq); +} + +static void intc_disable_or_mask(unsigned int irq) +{ + pr_debug("disable: %d\n", irq); + out_be32(INTC_BASE + CIE, 1 << irq); +} + +static void intc_ack(unsigned int irq) +{ + pr_debug("ack: %d\n", irq); + out_be32(INTC_BASE + IAR, 1 << irq); +} + +static void intc_mask_ack(unsigned int irq) +{ + unsigned long mask = 1 << irq; + pr_debug("disable_and_ack: %d\n", irq); + out_be32(INTC_BASE + CIE, mask); + out_be32(INTC_BASE + IAR, mask); +} + +static void intc_end(unsigned int irq) +{ + unsigned long mask = 1 << irq; + pr_debug("end: %d\n", irq); + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { + out_be32(INTC_BASE + SIE, mask); + /* ack level sensitive intr */ + if (irq_desc[irq].status & IRQ_LEVEL) + out_be32(INTC_BASE + IAR, mask); + } +} + +static struct irq_chip intc_dev = { + .name = "Xilinx INTC", + .unmask = intc_enable_or_unmask, + .mask = intc_disable_or_mask, + .ack = intc_ack, + .mask_ack = intc_mask_ack, + .end = intc_end, +}; + +unsigned int get_irq(struct pt_regs *regs) +{ + int irq; + + /* + * NOTE: This function is the one that needs to be improved in + * order to handle multiple interrupt controllers. It currently + * is hardcoded to check for interrupts only on the first INTC. + */ + irq = in_be32(INTC_BASE + IVR); + pr_debug("get_irq: %d\n", irq); + + return irq; +} + +void __init init_IRQ(void) +{ + u32 i, j, intr_type; + struct device_node *intc = NULL; +#ifdef CONFIG_SELFMOD_INTC + unsigned int intc_baseaddr = 0; + static int arr_func[] = { + (int)&get_irq, + (int)&intc_enable_or_unmask, + (int)&intc_disable_or_mask, + (int)&intc_mask_ack, + (int)&intc_ack, + (int)&intc_end, + 0 + }; +#endif + static char *intc_list[] = { + "xlnx,xps-intc-1.00.a", + "xlnx,opb-intc-1.00.c", + "xlnx,opb-intc-1.00.b", + "xlnx,opb-intc-1.00.a", + NULL + }; + + for (j = 0; intc_list[j] != NULL; j++) { + intc = of_find_compatible_node(NULL, NULL, intc_list[j]); + if (intc) + break; + } + + intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL); + intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE); + nr_irq = *(int *) of_get_property(intc, "xlnx,num-intr-inputs", NULL); + + intr_type = + *(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL); + if (intr_type >= (1 << nr_irq)) + printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n"); + +#ifdef CONFIG_SELFMOD_INTC + selfmod_function((int *) arr_func, intc_baseaddr); +#endif + printk(KERN_INFO "%s #0 at 0x%08x, num_irq=%d, edge=0x%x\n", + intc_list[j], intc_baseaddr, nr_irq, intr_type); + + /* + * Disable all external interrupts until they are + * explicity requested. + */ + out_be32(intc_baseaddr + IER, 0); + + /* Acknowledge any pending interrupts just in case. */ + out_be32(intc_baseaddr + IAR, 0xffffffff); + + /* Turn on the Master Enable. */ + out_be32(intc_baseaddr + MER, MER_HIE | MER_ME); + + for (i = 0; i < nr_irq; ++i) { + if (intr_type & (0x00000001 << i)) { + set_irq_chip_and_handler_name(i, &intc_dev, + handle_edge_irq, intc_dev.name); + irq_desc[i].status &= ~IRQ_LEVEL; + } else { + set_irq_chip_and_handler_name(i, &intc_dev, + handle_level_irq, intc_dev.name); + irq_desc[i].status |= IRQ_LEVEL; + } + } +} diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c new file mode 100644 index 0000000..f688ee9 --- /dev/null +++ b/arch/microblaze/kernel/irq.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +unsigned int irq_of_parse_and_map(struct device_node *dev, int index) +{ + struct of_irq oirq; + + if (of_irq_map_one(dev, index, &oirq)) + return NO_IRQ; + + return oirq.specifier[0]; +} +EXPORT_SYMBOL_GPL(irq_of_parse_and_map); + +/* + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themselves. + */ +void ack_bad_irq(unsigned int irq) +{ + printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq); +} + +static u32 concurrent_irq; + +void do_IRQ(struct pt_regs *regs) +{ + unsigned int irq; + struct pt_regs *old_regs = set_irq_regs(regs); + + irq_enter(); + irq = get_irq(regs); +next_irq: + BUG_ON(irq == -1U); + generic_handle_irq(irq); + + irq = get_irq(regs); + if (irq != -1U) { + pr_debug("next irq: %d\n", irq); + ++concurrent_irq; + goto next_irq; + } + + irq_exit(); + set_irq_regs(old_regs); +} + +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v, j; + struct irqaction *action; + unsigned long flags; + + if (i == 0) { + seq_printf(p, " "); + for_each_online_cpu(j) + seq_printf(p, "CPU%-8d", j); + seq_putc(p, '\n'); + } + + if (i < nr_irq) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto skip; + seq_printf(p, "%3d: ", i); +#ifndef CONFIG_SMP + seq_printf(p, "%10u ", kstat_irqs(i)); +#else + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); +#endif + seq_printf(p, " %8s", irq_desc[i].status & + IRQ_LEVEL ? "level" : "edge"); + seq_printf(p, " %8s", irq_desc[i].chip->name); + seq_printf(p, " %s", action->name); + + for (action = action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + + seq_putc(p, '\n'); +skip: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } + return 0; +} diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c new file mode 100644 index 0000000..05a497e --- /dev/null +++ b/arch/microblaze/kernel/timer.c @@ -0,0 +1,262 @@ +/* + * Copyright (C) 2007-2009 Michal Simek + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_SELFMOD_TIMER +#include +#define TIMER_BASE BARRIER_BASE_ADDR +#else +static unsigned int timer_baseaddr; +#define TIMER_BASE timer_baseaddr +#endif + +#define TCSR0 (0x00) +#define TLR0 (0x04) +#define TCR0 (0x08) +#define TCSR1 (0x10) +#define TLR1 (0x14) +#define TCR1 (0x18) + +#define TCSR_MDT (1<<0) +#define TCSR_UDT (1<<1) +#define TCSR_GENT (1<<2) +#define TCSR_CAPT (1<<3) +#define TCSR_ARHT (1<<4) +#define TCSR_LOAD (1<<5) +#define TCSR_ENIT (1<<6) +#define TCSR_ENT (1<<7) +#define TCSR_TINT (1<<8) +#define TCSR_PWMA (1<<9) +#define TCSR_ENALL (1<<10) + +static inline void microblaze_timer0_stop(void) +{ + out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0) & ~TCSR_ENT); +} + +static inline void microblaze_timer0_start_periodic(unsigned long load_val) +{ + if (!load_val) + load_val = 1; + out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */ + + /* load the initial value */ + out_be32(TIMER_BASE + TCSR0, TCSR_LOAD); + + /* see timer data sheet for detail + * !ENALL - don't enable 'em all + * !PWMA - disable pwm + * TINT - clear interrupt status + * ENT- enable timer itself + * EINT - enable interrupt + * !LOAD - clear the bit to let go + * ARHT - auto reload + * !CAPT - no external trigger + * !GENT - no external signal + * UDT - set the timer as down counter + * !MDT0 - generate mode + */ + out_be32(TIMER_BASE + TCSR0, + TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT); +} + +static inline void microblaze_timer0_start_oneshot(unsigned long load_val) +{ + if (!load_val) + load_val = 1; + out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */ + + /* load the initial value */ + out_be32(TIMER_BASE + TCSR0, TCSR_LOAD); + + out_be32(TIMER_BASE + TCSR0, + TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT); +} + +static int microblaze_timer_set_next_event(unsigned long delta, + struct clock_event_device *dev) +{ + pr_debug("%s: next event, delta %x\n", __func__, (u32)delta); + microblaze_timer0_start_oneshot(delta); + return 0; +} + +static void microblaze_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_INFO "%s: periodic\n", __func__); + microblaze_timer0_start_periodic(cpuinfo.freq_div_hz); + break; + case CLOCK_EVT_MODE_ONESHOT: + printk(KERN_INFO "%s: oneshot\n", __func__); + break; + case CLOCK_EVT_MODE_UNUSED: + printk(KERN_INFO "%s: unused\n", __func__); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + printk(KERN_INFO "%s: shutdown\n", __func__); + microblaze_timer0_stop(); + break; + case CLOCK_EVT_MODE_RESUME: + printk(KERN_INFO "%s: resume\n", __func__); + break; + } +} + +static struct clock_event_device clockevent_microblaze_timer = { + .name = "microblaze_clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .shift = 24, + .rating = 300, + .set_next_event = microblaze_timer_set_next_event, + .set_mode = microblaze_timer_set_mode, +}; + +static inline void timer_ack(void) +{ + out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0)); +} + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_microblaze_timer; +#ifdef CONFIG_HEART_BEAT + heartbeat(); +#endif + timer_ack(); + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction timer_irqaction = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_TIMER, + .name = "timer", + .dev_id = &clockevent_microblaze_timer, +}; + +static __init void microblaze_clockevent_init(void) +{ + clockevent_microblaze_timer.mult = + div_sc(cpuinfo.cpu_clock_freq, NSEC_PER_SEC, + clockevent_microblaze_timer.shift); + clockevent_microblaze_timer.max_delta_ns = + clockevent_delta2ns((u32)~0, &clockevent_microblaze_timer); + clockevent_microblaze_timer.min_delta_ns = + clockevent_delta2ns(1, &clockevent_microblaze_timer); + clockevent_microblaze_timer.cpumask = cpumask_of(0); + clockevents_register_device(&clockevent_microblaze_timer); +} + +static cycle_t microblaze_read(void) +{ + /* reading actual value of timer 1 */ + return (cycle_t) (in_be32(TIMER_BASE + TCR1)); +} + +static struct clocksource clocksource_microblaze = { + .name = "microblaze_clocksource", + .rating = 300, + .read = microblaze_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 24, /* I can shift it */ + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init microblaze_clocksource_init(void) +{ + clocksource_microblaze.mult = + clocksource_hz2mult(cpuinfo.cpu_clock_freq, + clocksource_microblaze.shift); + if (clocksource_register(&clocksource_microblaze)) + panic("failed to register clocksource"); + + /* stop timer1 */ + out_be32(TIMER_BASE + TCSR1, in_be32(TIMER_BASE + TCSR1) & ~TCSR_ENT); + /* start timer1 - up counting without interrupt */ + out_be32(TIMER_BASE + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT); + return 0; +} + +void __init time_init(void) +{ + u32 irq, i = 0; + u32 timer_num = 1; + struct device_node *timer = NULL; +#ifdef CONFIG_SELFMOD_TIMER + unsigned int timer_baseaddr = 0; + int arr_func[] = { + (int)µblaze_read, + (int)&timer_interrupt, + (int)µblaze_clocksource_init, + (int)µblaze_timer_set_mode, + (int)µblaze_timer_set_next_event, + 0 + }; +#endif + char *timer_list[] = { + "xlnx,xps-timer-1.00.a", + "xlnx,opb-timer-1.00.b", + "xlnx,opb-timer-1.00.a", + NULL + }; + + for (i = 0; timer_list[i] != NULL; i++) { + timer = of_find_compatible_node(NULL, NULL, timer_list[i]); + if (timer) + break; + } + + timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL); + timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE); + irq = *(int *) of_get_property(timer, "interrupts", NULL); + timer_num = + *(int *) of_get_property(timer, "xlnx,one-timer-only", NULL); + if (timer_num) { + printk(KERN_EMERG "Please enable two timers in HW\n"); + BUG(); + } + +#ifdef CONFIG_SELFMOD_TIMER + selfmod_function((int *) arr_func, timer_baseaddr); +#endif + printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n", + timer_list[i], timer_baseaddr, irq); + + cpuinfo.freq_div_hz = cpuinfo.cpu_clock_freq / HZ; + + setup_irq(irq, &timer_irqaction); +#ifdef CONFIG_HEART_BEAT + setup_heartbeat(); +#endif + microblaze_clocksource_init(); + microblaze_clockevent_init(); +} -- cgit v0.10.2 From 575ca2883ed7652aba09d7b77332004e45d56f69 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:50 +0100 Subject: microblaze_v8: Kconfig patches Reviewed-by: Ingo Molnar Acked-by: Randy Dunlap Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig new file mode 100644 index 0000000..8cc312b --- /dev/null +++ b/arch/microblaze/Kconfig @@ -0,0 +1,141 @@ +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. + +mainmenu "Linux/Microblaze Kernel Configuration" + +config MICROBLAZE + def_bool y + select HAVE_LMB + +config SWAP + def_bool n + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config RWSEM_XCHGADD_ALGORITHM + bool + +config ARCH_HAS_ILOG2_U32 + def_bool n + +config ARCH_HAS_ILOG2_U64 + def_bool n + +config GENERIC_FIND_NEXT_BIT + def_bool y + +config GENERIC_HWEIGHT + def_bool y + +config GENERIC_HARDIRQS + def_bool y + +config GENERIC_IRQ_PROBE + def_bool y + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_TIME + def_bool y + +config GENERIC_TIME_VSYSCALL + def_bool n + +config GENERIC_CLOCKEVENTS + def_bool y + +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y + +config PCI + depends on !MMU + def_bool n + +config NO_DMA + depends on !MMU + def_bool n + +source "init/Kconfig" + +source "kernel/Kconfig.freezer" + +source "arch/microblaze/platform/Kconfig.platform" + +menu "Processor type and features" + +source kernel/time/Kconfig + +source "kernel/Kconfig.preempt" + +source "kernel/Kconfig.hz" + +config MMU + def_bool n + +config NO_MMU + bool + depends on !MMU + default y + +comment "Boot options" + +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" + +config CMDLINE + string "Default kernel command string" + depends on CMDLINE_BOOL + default "console=ttyUL0,115200" + help + On some architectures there is currently no way for the boot loader + to pass arguments to the kernel. For these architectures, you should + supply some command-line options at build time by entering them + here. + +config CMDLINE_FORCE + bool "Force default kernel command string" + depends on CMDLINE_BOOL + default n + help + Set this to have arguments from the default kernel command string + override those passed by the boot loader. + +config OF + def_bool y + +config OF_DEVICE + def_bool y + +config PROC_DEVICETREE + bool "Support for device tree in /proc" + depends on PROC_FS + help + This option adds a device-tree directory under /proc which contains + an image of the device tree that the kernel copies from Open + Firmware or other boot firmware. If unsure, say Y here. + +endmenu + +source "mm/Kconfig" + +menu "Exectuable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/microblaze/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug new file mode 100644 index 0000000..242cd35 --- /dev/null +++ b/arch/microblaze/Kconfig.debug @@ -0,0 +1,26 @@ +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. + +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config EARLY_PRINTK + bool "Early printk function for kernel" + default n + help + This option turns on/off early printk messages to console. + First Uartlite node is taken. + +config HEART_BEAT + bool "Heart beat function for kernel" + default n + help + This option turns on/off heart beat kernel functionality. + First GPIO node is taken. + +config DEBUG_BOOTMEM + depends on DEBUG_KERNEL + bool "Debug BOOTMEM initialization" + +endmenu diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform new file mode 100644 index 0000000..8e9b475 --- /dev/null +++ b/arch/microblaze/platform/Kconfig.platform @@ -0,0 +1,85 @@ +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# +# Platform selection Kconfig menu for MicroBlaze targets +# + +menu "Platform options" +choice + prompt "Platform" + default PLATFORM_MICROBLAZE_AUTO + help + Choose which hardware board/platform you are targeting. + +config PLATFORM_GENERIC + bool "Generic" + help + Choose this option for the Generic platform. + +endchoice + +config SELFMOD + bool "Use self modified code for intc/timer" + depends on EXPERIMENTAL && NO_MMU + default n + help + This choice enables self-modified code for interrupt controller + and timer. + +config SELFMOD_INTC + bool "Use self modified code for intc" + depends on SELFMOD + default y + help + This choice enables self-modified code for interrupt controller. + +config SELFMOD_TIMER + bool "Use self modified code for timer" + depends on SELFMOD + default y + help + This choice enables self-modified code for timer. + +config OPT_LIB_FUNCTION + bool "Optimalized lib function" + default y + help + Allows turn on optimalized library function (memcpy and memmove). + They are optimized by using word alignment. This will work + fine if both source and destination are aligned on the same + boundary. However, if they are aligned on different boundaries + shifts will be necessary. This might result in bad performance + on MicroBlaze systems without a barrel shifter. + +config OPT_LIB_ASM + bool "Optimalized lib function ASM" + depends on OPT_LIB_FUNCTION + default n + help + Allows turn on optimalized library function (memcpy and memmove). + Function are written in asm code. + +# This is still a bit broken - disabling for now JW 20070504 +config ALLOW_EDIT_AUTO + bool "Permit Display/edit of Kconfig.auto platform settings" + default n + help + Allows the editing of auto-generated platform settings from + the Kconfig.auto file. Obviously this does not change the + underlying hardware, so be very careful if you go editing + these settings. + + Also, if you enable this, and edit various Kconfig.auto + settings, YOUR CHANGES WILL BE LOST if you then disable it + again. You have been warned! + + If unsure, say no. + +comment "Automatic platform settings from Kconfig.auto" + depends on ALLOW_EDIT_AUTO + +if PLATFORM_GENERIC=y + source "arch/microblaze/platform/generic/Kconfig.auto" +endif + +endmenu diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto new file mode 100644 index 0000000..fbca22d --- /dev/null +++ b/arch/microblaze/platform/generic/Kconfig.auto @@ -0,0 +1,62 @@ +# +# (C) Copyright 2007 Michal Simek +# +# Michal SIMEK +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Definitions for MICROBLAZE0 +comment "Definitions for MICROBLAZE0" + depends on ALLOW_EDIT_AUTO + +config KERNEL_BASE_ADDR + hex "Physical address where Linux Kernel is" + default "0x90000000" + help + BASE Address for kernel + +config XILINX_MICROBLAZE0_FAMILY + string "Targetted FPGA family" if ALLOW_EDIT_AUTO + default "virtex5" + +config XILINX_MICROBLAZE0_USE_MSR_INSTR + int "USE_MSR_INSTR range (0:1)" if ALLOW_EDIT_AUTO + default 1 + +config XILINX_MICROBLAZE0_USE_PCMP_INSTR + int "USE_PCMP_INSTR range (0:1)" if ALLOW_EDIT_AUTO + default 1 + +config XILINX_MICROBLAZE0_USE_BARREL + int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO + default 1 + +config XILINX_MICROBLAZE0_USE_DIV + int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO + default 1 + +config XILINX_MICROBLAZE0_USE_HW_MUL + int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" if ALLOW_EDIT_AUTO + default 2 + +config XILINX_MICROBLAZE0_USE_FPU + int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" if ALLOW_EDIT_AUTO + default 2 + +config XILINX_MICROBLAZE0_HW_VER + string "Core version number" if ALLOW_EDIT_AUTO + default 7.10.d -- cgit v0.10.2 From 5f8ffb5f6649a261372547a5841285c23409ab68 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:51 +0100 Subject: microblaze_v8: Makefiles for Microblaze cpu Reviewed-by: Ingo Molnar Acked-by: Randy Dunlap Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile new file mode 100644 index 0000000..0dcbb98 --- /dev/null +++ b/arch/microblaze/Makefile @@ -0,0 +1,69 @@ +UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\" + +# What CPU vesion are we building for, and crack it open +# as major.minor.rev +CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) ) +CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1) +CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2) +CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3) + +export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV + +# Use cpu-related CONFIG_ vars to set compile options. + +# Work out HW multipler support. This is icky. +# 1. Spartan2 has no HW multiplers. +# 2. MicroBlaze v3.x always uses them, except in Spartan 2 +# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings +ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) + ifeq ($(CPU_MAJOR),3) + CPUFLAGS-1 += -mno-xl-soft-mul + else + # USE_HW_MUL can be 0, 1, or 2, defining a heirarchy of HW Mul support. + CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high + CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul + endif +endif +CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div +CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift +CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare + +CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) + +# The various CONFIG_XILINX cpu features options are integers 0/1/2... +# rather than bools y/n +CFLAGS += $(CPUFLAGS-1) +CFLAGS += $(CPUFLAGS-2) + +# r31 holds current when in kernel mode +CFLAGS += -ffixed-r31 + +LDFLAGS_BLOB := --format binary --oformat elf32-microblaze + +LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) + +head-y := arch/microblaze/kernel/head.o +libs-y += arch/microblaze/lib/ $(LIBGCC) +core-y += arch/microblaze/kernel/ arch/microblaze/mm/ \ + arch/microblaze/platform/ + +boot := arch/$(ARCH)/boot + +# defines filename extension depending memory management type +ifeq ($(CONFIG_MMU),) +MMUEXT := -nommu +endif +export MMUEXT + +all: linux.bin + +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + +linux.bin linux.bin.gz: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +define archhelp + echo '* linux.bin - Create raw binary' + echo ' linux.bin.gz - Create compressed raw binary' +endef diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile new file mode 100644 index 0000000..844edf4 --- /dev/null +++ b/arch/microblaze/boot/Makefile @@ -0,0 +1,17 @@ +# +# arch/microblaze/boot/Makefile +# + +targets := linux.bin linux.bin.gz + +OBJCOPYFLAGS_linux.bin := -O binary + +$(obj)/linux.bin: vmlinux FORCE + $(call if_changed,objcopy) + @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' + +$(obj)/linux.bin.gz: $(obj)/linux.bin FORCE + $(call if_changed,gzip) + @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' + +clean-kernel += linux.bin linux.bin.gz diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile new file mode 100644 index 0000000..da94bec --- /dev/null +++ b/arch/microblaze/kernel/Makefile @@ -0,0 +1,19 @@ +# +# Makefile +# + +extra-y := head.o vmlinux.lds + +obj-y += exceptions.o \ + hw_exception_handler.o init_task.o intc.o irq.o of_device.o \ + of_platform.o process.o prom.o prom_parse.o ptrace.o \ + setup.o signal.o sys_microblaze.o timer.o traps.o + +obj-y += cpu/ + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_SELFMOD) += selfmod.o +obj-$(CONFIG_HEART_BEAT) += heartbeat.o +obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o + +obj-y += entry$(MMUEXT).o diff --git a/arch/microblaze/kernel/cpu/Makefile b/arch/microblaze/kernel/cpu/Makefile new file mode 100644 index 0000000..20646e5 --- /dev/null +++ b/arch/microblaze/kernel/cpu/Makefile @@ -0,0 +1,8 @@ +# +# Build the appropriate CPU version support +# + +EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \ + -DCPU_REV=$(CPU_REV) + +obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile new file mode 100644 index 0000000..d27126b --- /dev/null +++ b/arch/microblaze/lib/Makefile @@ -0,0 +1,13 @@ +# +# Makefile +# + +lib-y := memset.o checksum.o + +ifeq ($(CONFIG_OPT_LIB_ASM),y) +lib-y += fastcopy.o +else +lib-y += memcpy.o memmove.o +endif + +lib-y += uaccess.o diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile new file mode 100644 index 0000000..bf9e447 --- /dev/null +++ b/arch/microblaze/mm/Makefile @@ -0,0 +1,5 @@ +# +# Makefile +# + +obj-y := init.o diff --git a/arch/microblaze/platform/Makefile b/arch/microblaze/platform/Makefile new file mode 100644 index 0000000..ea1b75c --- /dev/null +++ b/arch/microblaze/platform/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for arch/microblaze/platform directory +# +#obj-$(CONFIG_PLATFORM_GENERIC) += generic/ + +obj-y += platform.o diff --git a/arch/microblaze/platform/generic/Makefile b/arch/microblaze/platform/generic/Makefile new file mode 100644 index 0000000..9a8b1bd --- /dev/null +++ b/arch/microblaze/platform/generic/Makefile @@ -0,0 +1,3 @@ +# +# Empty Makefile to keep make clean happy +# -- cgit v0.10.2 From 4286c2b08c1a24fcb96503a3fb43e69cb1ae0410 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:51 +0100 Subject: microblaze_v8: Uartlite for Microblaze Reviewed-by: Ingo Molnar Acked-by: Peter Korsgaard Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 7d7f576..131901b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -833,7 +833,7 @@ config SERIAL_IMX_CONSOLE config SERIAL_UARTLITE tristate "Xilinx uartlite serial port support" - depends on PPC32 + depends on PPC32 || MICROBLAZE select SERIAL_CORE help Say Y here if you want to use the Xilinx uartlite serial controller. @@ -1319,7 +1319,7 @@ config SERIAL_NETX_CONSOLE config SERIAL_OF_PLATFORM tristate "Serial port on Open Firmware platform bus" - depends on PPC_OF + depends on PPC_OF || MICROBLAZE depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL help If you have a PowerPC based system that has serial ports -- cgit v0.10.2 From c6375b0a8007fffe65109aeea032a9243df070e1 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 27 Mar 2009 14:25:52 +0100 Subject: microblaze_v8: Add MAINTAINERS fragment Reviewed-by: Ingo Molnar Acked-by: John Linn Acked-by: Stephen Neuendorffer Acked-by: John Williams Signed-off-by: Michal Simek diff --git a/MAINTAINERS b/MAINTAINERS index 5d460c9..7bfeed1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2943,6 +2943,14 @@ L: linux-mtd@lists.infradead.org T: git git://git.infradead.org/mtd-2.6.git S: Maintained +MICROBLAZE ARCHITECTURE +P: Michal Simek +M: monstr@monstr.eu +L: microblaze-uclinux@itee.uq.edu.au +W: http://www.monstr.eu/fdt/ +T: git git://git.monstr.eu/linux-2.6-microblaze.git +S: Supported + MICROTEK X6 SCANNER P: Oliver Neukum M: oliver@neukum.name -- cgit v0.10.2 From e1d60ec6699f19b760df8261e922ae236ea7bb31 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 30 Mar 2009 08:31:05 -0700 Subject: IB/mlx4: Use pgprot_writecombine() for BlueFlame pages The PAT work on x86 has finally made pgprot_writecombine() a usable API for modular drivers. As the comment indicates, this is exactly what we want to use in mlx4_ib to map BlueFlame pages up to userspace, since using WC for these pages improves small message latency significantly. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 2ccb9d3..ae3d759 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -394,8 +394,7 @@ static int mlx4_ib_mmap(struct ib_ucontext *context, struct vm_area_struct *vma) PAGE_SIZE, vma->vm_page_prot)) return -EAGAIN; } else if (vma->vm_pgoff == 1 && dev->dev->caps.bf_reg_size != 0) { - /* FIXME want pgprot_writecombine() for BlueFlame pages */ - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); if (io_remap_pfn_range(vma, vma->vm_start, to_mucontext(context)->uar.pfn + -- cgit v0.10.2 From 04b5d028f50ff05a8f9ae049ee71f8fdfcf1f5de Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 30 Mar 2009 08:37:56 -0700 Subject: RDMA/cxgb3: Handle EEH events - wrap calls into cxgb3 and fail them if we're in the middle of a PCI EEH event. - correctly unwind and release endpoint and other resources when we are in an EEH event. - dispatch IB_EVENT_DEVICE_FATAL event when cxgb3 notifies iw_cxgb3 of a fatal error. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index a4a82bf..8d71086 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -152,7 +152,7 @@ static int cxio_hal_clear_qp_ctx(struct cxio_rdev *rdev_p, u32 qpid) sge_cmd = qpid << 8 | 3; wqe->sge_cmd = cpu_to_be64(sge_cmd); skb->priority = CPL_PRIORITY_CONTROL; - return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb)); + return iwch_cxgb3_ofld_send(rdev_p->t3cdev_p, skb); } int cxio_create_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq) @@ -571,7 +571,7 @@ static int cxio_hal_init_ctrl_qp(struct cxio_rdev *rdev_p) (unsigned long long) rdev_p->ctrl_qp.dma_addr, rdev_p->ctrl_qp.workq, 1 << T3_CTRL_QP_SIZE_LOG2); skb->priority = CPL_PRIORITY_CONTROL; - return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb)); + return iwch_cxgb3_ofld_send(rdev_p->t3cdev_p, skb); err: kfree_skb(skb); return err; @@ -701,7 +701,7 @@ static int __cxio_tpt_op(struct cxio_rdev *rdev_p, u32 reset_tpt_entry, u32 stag_idx; u32 wptr; - if (rdev_p->flags) + if (cxio_fatal_error(rdev_p)) return -EIO; stag_state = stag_state > 0; @@ -858,7 +858,7 @@ int cxio_rdma_init(struct cxio_rdev *rdev_p, struct t3_rdma_init_attr *attr) wqe->qp_dma_size = cpu_to_be32(attr->qp_dma_size); wqe->irs = cpu_to_be32(attr->irs); skb->priority = 0; /* 0=>ToeQ; 1=>CtrlQ */ - return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb)); + return iwch_cxgb3_ofld_send(rdev_p->t3cdev_p, skb); } void cxio_register_ev_cb(cxio_hal_ev_callback_func_t ev_cb) @@ -1041,9 +1041,9 @@ void cxio_rdev_close(struct cxio_rdev *rdev_p) cxio_hal_pblpool_destroy(rdev_p); cxio_hal_rqtpool_destroy(rdev_p); list_del(&rdev_p->entry); - rdev_p->t3cdev_p->ulp = NULL; cxio_hal_destroy_ctrl_qp(rdev_p); cxio_hal_destroy_resource(rdev_p->rscp); + rdev_p->t3cdev_p->ulp = NULL; } } diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h index 094a66d..bfd03bf 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.h +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h @@ -115,6 +115,11 @@ struct cxio_rdev { #define CXIO_ERROR_FATAL 1 }; +static inline int cxio_fatal_error(struct cxio_rdev *rdev_p) +{ + return rdev_p->flags & CXIO_ERROR_FATAL; +} + static inline int cxio_num_stags(struct cxio_rdev *rdev_p) { return min((int)T3_MAX_NUM_STAG, (int)((rdev_p->rnic_info.tpt_top - rdev_p->rnic_info.tpt_base) >> 5)); @@ -188,6 +193,7 @@ void cxio_count_scqes(struct t3_cq *cq, struct t3_wq *wq, int *count); void cxio_flush_hw_cq(struct t3_cq *cq); int cxio_poll_cq(struct t3_wq *wq, struct t3_cq *cq, struct t3_cqe *cqe, u8 *cqe_flushed, u64 *cookie, u32 *credit); +int iwch_cxgb3_ofld_send(struct t3cdev *tdev, struct sk_buff *skb); #define MOD "iw_cxgb3: " #define PDBG(fmt, args...) pr_debug(MOD fmt, ## args) diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c index 37a4fc2..26fc0a4 100644 --- a/drivers/infiniband/hw/cxgb3/iwch.c +++ b/drivers/infiniband/hw/cxgb3/iwch.c @@ -165,12 +165,19 @@ static void close_rnic_dev(struct t3cdev *tdev) static void iwch_err_handler(struct t3cdev *tdev, u32 status, u32 error) { struct cxio_rdev *rdev = tdev->ulp; + struct iwch_dev *rnicp = rdev_to_iwch_dev(rdev); + struct ib_event event; - if (status == OFFLOAD_STATUS_DOWN) + if (status == OFFLOAD_STATUS_DOWN) { rdev->flags = CXIO_ERROR_FATAL; - return; + event.device = &rnicp->ibdev; + event.event = IB_EVENT_DEVICE_FATAL; + event.element.port_num = 0; + ib_dispatch_event(&event); + } + return; } static int __init iwch_init_module(void) diff --git a/drivers/infiniband/hw/cxgb3/iwch.h b/drivers/infiniband/hw/cxgb3/iwch.h index 3773453..8473550 100644 --- a/drivers/infiniband/hw/cxgb3/iwch.h +++ b/drivers/infiniband/hw/cxgb3/iwch.h @@ -117,6 +117,11 @@ static inline struct iwch_dev *to_iwch_dev(struct ib_device *ibdev) return container_of(ibdev, struct iwch_dev, ibdev); } +static inline struct iwch_dev *rdev_to_iwch_dev(struct cxio_rdev *rdev) +{ + return container_of(rdev, struct iwch_dev, rdev); +} + static inline int t3b_device(const struct iwch_dev *rhp) { return rhp->rdev.t3cdev_p->type == T3B; diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index 8699947..59e1c5f0 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -139,6 +139,38 @@ static void stop_ep_timer(struct iwch_ep *ep) put_ep(&ep->com); } +int iwch_l2t_send(struct t3cdev *tdev, struct sk_buff *skb, struct l2t_entry *l2e) +{ + int error = 0; + struct cxio_rdev *rdev; + + rdev = (struct cxio_rdev *)tdev->ulp; + if (cxio_fatal_error(rdev)) { + kfree_skb(skb); + return -EIO; + } + error = l2t_send(tdev, skb, l2e); + if (error) + kfree_skb(skb); + return error; +} + +int iwch_cxgb3_ofld_send(struct t3cdev *tdev, struct sk_buff *skb) +{ + int error = 0; + struct cxio_rdev *rdev; + + rdev = (struct cxio_rdev *)tdev->ulp; + if (cxio_fatal_error(rdev)) { + kfree_skb(skb); + return -EIO; + } + error = cxgb3_ofld_send(tdev, skb); + if (error) + kfree_skb(skb); + return error; +} + static void release_tid(struct t3cdev *tdev, u32 hwtid, struct sk_buff *skb) { struct cpl_tid_release *req; @@ -150,7 +182,7 @@ static void release_tid(struct t3cdev *tdev, u32 hwtid, struct sk_buff *skb) req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, hwtid)); skb->priority = CPL_PRIORITY_SETUP; - cxgb3_ofld_send(tdev, skb); + iwch_cxgb3_ofld_send(tdev, skb); return; } @@ -172,8 +204,7 @@ int iwch_quiesce_tid(struct iwch_ep *ep) req->val = cpu_to_be64(1 << S_TCB_RX_QUIESCE); skb->priority = CPL_PRIORITY_DATA; - cxgb3_ofld_send(ep->com.tdev, skb); - return 0; + return iwch_cxgb3_ofld_send(ep->com.tdev, skb); } int iwch_resume_tid(struct iwch_ep *ep) @@ -194,8 +225,7 @@ int iwch_resume_tid(struct iwch_ep *ep) req->val = 0; skb->priority = CPL_PRIORITY_DATA; - cxgb3_ofld_send(ep->com.tdev, skb); - return 0; + return iwch_cxgb3_ofld_send(ep->com.tdev, skb); } static void set_emss(struct iwch_ep *ep, u16 opt) @@ -382,7 +412,7 @@ static void abort_arp_failure(struct t3cdev *dev, struct sk_buff *skb) PDBG("%s t3cdev %p\n", __func__, dev); req->cmd = CPL_ABORT_NO_RST; - cxgb3_ofld_send(dev, skb); + iwch_cxgb3_ofld_send(dev, skb); } static int send_halfclose(struct iwch_ep *ep, gfp_t gfp) @@ -402,8 +432,7 @@ static int send_halfclose(struct iwch_ep *ep, gfp_t gfp) req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_CLOSE_CON)); req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_CON_REQ, ep->hwtid)); - l2t_send(ep->com.tdev, skb, ep->l2t); - return 0; + return iwch_l2t_send(ep->com.tdev, skb, ep->l2t); } static int send_abort(struct iwch_ep *ep, struct sk_buff *skb, gfp_t gfp) @@ -424,8 +453,7 @@ static int send_abort(struct iwch_ep *ep, struct sk_buff *skb, gfp_t gfp) req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ABORT_REQ, ep->hwtid)); req->cmd = CPL_ABORT_SEND_RST; - l2t_send(ep->com.tdev, skb, ep->l2t); - return 0; + return iwch_l2t_send(ep->com.tdev, skb, ep->l2t); } static int send_connect(struct iwch_ep *ep) @@ -469,8 +497,7 @@ static int send_connect(struct iwch_ep *ep) req->opt0l = htonl(opt0l); req->params = 0; req->opt2 = htonl(opt2); - l2t_send(ep->com.tdev, skb, ep->l2t); - return 0; + return iwch_l2t_send(ep->com.tdev, skb, ep->l2t); } static void send_mpa_req(struct iwch_ep *ep, struct sk_buff *skb) @@ -527,7 +554,7 @@ static void send_mpa_req(struct iwch_ep *ep, struct sk_buff *skb) req->sndseq = htonl(ep->snd_seq); BUG_ON(ep->mpa_skb); ep->mpa_skb = skb; - l2t_send(ep->com.tdev, skb, ep->l2t); + iwch_l2t_send(ep->com.tdev, skb, ep->l2t); start_ep_timer(ep); state_set(&ep->com, MPA_REQ_SENT); return; @@ -578,8 +605,7 @@ static int send_mpa_reject(struct iwch_ep *ep, const void *pdata, u8 plen) req->sndseq = htonl(ep->snd_seq); BUG_ON(ep->mpa_skb); ep->mpa_skb = skb; - l2t_send(ep->com.tdev, skb, ep->l2t); - return 0; + return iwch_l2t_send(ep->com.tdev, skb, ep->l2t); } static int send_mpa_reply(struct iwch_ep *ep, const void *pdata, u8 plen) @@ -630,8 +656,7 @@ static int send_mpa_reply(struct iwch_ep *ep, const void *pdata, u8 plen) req->sndseq = htonl(ep->snd_seq); ep->mpa_skb = skb; state_set(&ep->com, MPA_REP_SENT); - l2t_send(ep->com.tdev, skb, ep->l2t); - return 0; + return iwch_l2t_send(ep->com.tdev, skb, ep->l2t); } static int act_establish(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) @@ -795,7 +820,7 @@ static int update_rx_credits(struct iwch_ep *ep, u32 credits) OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RX_DATA_ACK, ep->hwtid)); req->credit_dack = htonl(V_RX_CREDITS(credits) | V_RX_FORCE_ACK(1)); skb->priority = CPL_PRIORITY_ACK; - cxgb3_ofld_send(ep->com.tdev, skb); + iwch_cxgb3_ofld_send(ep->com.tdev, skb); return credits; } @@ -1203,8 +1228,7 @@ static int listen_start(struct iwch_listen_ep *ep) req->opt1 = htonl(V_CONN_POLICY(CPL_CONN_POLICY_ASK)); skb->priority = 1; - cxgb3_ofld_send(ep->com.tdev, skb); - return 0; + return iwch_cxgb3_ofld_send(ep->com.tdev, skb); } static int pass_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) @@ -1237,8 +1261,7 @@ static int listen_stop(struct iwch_listen_ep *ep) req->cpu_idx = 0; OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_LISTSRV_REQ, ep->stid)); skb->priority = 1; - cxgb3_ofld_send(ep->com.tdev, skb); - return 0; + return iwch_cxgb3_ofld_send(ep->com.tdev, skb); } static int close_listsrv_rpl(struct t3cdev *tdev, struct sk_buff *skb, @@ -1286,7 +1309,7 @@ static void accept_cr(struct iwch_ep *ep, __be32 peer_ip, struct sk_buff *skb) rpl->opt2 = htonl(opt2); rpl->rsvd = rpl->opt2; /* workaround for HW bug */ skb->priority = CPL_PRIORITY_SETUP; - l2t_send(ep->com.tdev, skb, ep->l2t); + iwch_l2t_send(ep->com.tdev, skb, ep->l2t); return; } @@ -1315,7 +1338,7 @@ static void reject_cr(struct t3cdev *tdev, u32 hwtid, __be32 peer_ip, rpl->opt0l_status = htonl(CPL_PASS_OPEN_REJECT); rpl->opt2 = 0; rpl->rsvd = rpl->opt2; - cxgb3_ofld_send(tdev, skb); + iwch_cxgb3_ofld_send(tdev, skb); } } @@ -1613,7 +1636,7 @@ static int peer_abort(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) rpl->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, ep->hwtid)); rpl->cmd = CPL_ABORT_NO_RST; - cxgb3_ofld_send(ep->com.tdev, rpl_skb); + iwch_cxgb3_ofld_send(ep->com.tdev, rpl_skb); out: if (release) release_ep_resources(ep); @@ -2017,8 +2040,11 @@ int iwch_destroy_listen(struct iw_cm_id *cm_id) ep->com.rpl_done = 0; ep->com.rpl_err = 0; err = listen_stop(ep); + if (err) + goto done; wait_event(ep->com.waitq, ep->com.rpl_done); cxgb3_free_stid(ep->com.tdev, ep->stid); +done: err = ep->com.rpl_err; cm_id->rem_ref(cm_id); put_ep(&ep->com); @@ -2030,12 +2056,22 @@ int iwch_ep_disconnect(struct iwch_ep *ep, int abrupt, gfp_t gfp) int ret=0; unsigned long flags; int close = 0; + int fatal = 0; + struct t3cdev *tdev; + struct cxio_rdev *rdev; spin_lock_irqsave(&ep->com.lock, flags); PDBG("%s ep %p state %s, abrupt %d\n", __func__, ep, states[ep->com.state], abrupt); + tdev = (struct t3cdev *)ep->com.tdev; + rdev = (struct cxio_rdev *)tdev->ulp; + if (cxio_fatal_error(rdev)) { + fatal = 1; + close_complete_upcall(ep); + ep->com.state = DEAD; + } switch (ep->com.state) { case MPA_REQ_WAIT: case MPA_REQ_SENT: @@ -2075,7 +2111,11 @@ int iwch_ep_disconnect(struct iwch_ep *ep, int abrupt, gfp_t gfp) ret = send_abort(ep, NULL, gfp); else ret = send_halfclose(ep, gfp); + if (ret) + fatal = 1; } + if (fatal) + release_ep_resources(ep); return ret; } diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index c758fbd..2f546a6 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -751,7 +751,7 @@ int iwch_post_zb_read(struct iwch_qp *qhp) wqe->send.wrh.gen_tid_len = cpu_to_be32(V_FW_RIWR_TID(qhp->ep->hwtid)| V_FW_RIWR_LEN(flit_cnt)); skb->priority = CPL_PRIORITY_DATA; - return cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb); + return iwch_cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb); } /* @@ -783,7 +783,7 @@ int iwch_post_terminate(struct iwch_qp *qhp, struct respQ_msg_t *rsp_msg) V_FW_RIWR_FLAGS(T3_COMPLETION_FLAG | T3_NOTIFY_FLAG)); wqe->send.wrh.gen_tid_len = cpu_to_be32(V_FW_RIWR_TID(qhp->ep->hwtid)); skb->priority = CPL_PRIORITY_DATA; - return cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb); + return iwch_cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb); } /* -- cgit v0.10.2 From 874d8df5ed6e36fed07b524c266f6a96dd6d10d9 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 30 Mar 2009 08:37:59 -0700 Subject: RDMA/cxgb3: Release dependent resources only when endpoint memory is freed. The cxgb3 l2t entry, hwtid, and dst entry were being released before all the iwch_ep references were released. This can cause a crash in t3_l2t_send_slow() and other places where the l2t entry is used. The fix is to defer releasing these resources until all endpoint references are gone. Details: - move flags field to the iwch_ep_common struct. - add a flag indicating resources are to be released. - release resources at endpoint free time instead of close/abort time. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index 59e1c5f0..fef3f1a 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -282,18 +282,22 @@ static void *alloc_ep(int size, gfp_t gfp) void __free_ep(struct kref *kref) { - struct iwch_ep_common *epc; - epc = container_of(kref, struct iwch_ep_common, kref); - PDBG("%s ep %p state %s\n", __func__, epc, states[state_read(epc)]); - kfree(epc); + struct iwch_ep *ep; + ep = container_of(container_of(kref, struct iwch_ep_common, kref), + struct iwch_ep, com); + PDBG("%s ep %p state %s\n", __func__, ep, states[state_read(&ep->com)]); + if (ep->com.flags & RELEASE_RESOURCES) { + cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid); + dst_release(ep->dst); + l2t_release(L2DATA(ep->com.tdev), ep->l2t); + } + kfree(ep); } static void release_ep_resources(struct iwch_ep *ep) { PDBG("%s ep %p tid %d\n", __func__, ep, ep->hwtid); - cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid); - dst_release(ep->dst); - l2t_release(L2DATA(ep->com.tdev), ep->l2t); + ep->com.flags |= RELEASE_RESOURCES; put_ep(&ep->com); } @@ -1152,8 +1156,8 @@ static int abort_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) * We get 2 abort replies from the HW. The first one must * be ignored except for scribbling that we need one more. */ - if (!(ep->flags & ABORT_REQ_IN_PROGRESS)) { - ep->flags |= ABORT_REQ_IN_PROGRESS; + if (!(ep->com.flags & ABORT_REQ_IN_PROGRESS)) { + ep->com.flags |= ABORT_REQ_IN_PROGRESS; return CPL_RET_BUF_DONE; } @@ -1557,8 +1561,8 @@ static int peer_abort(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) * We get 2 peer aborts from the HW. The first one must * be ignored except for scribbling that we need one more. */ - if (!(ep->flags & PEER_ABORT_IN_PROGRESS)) { - ep->flags |= PEER_ABORT_IN_PROGRESS; + if (!(ep->com.flags & PEER_ABORT_IN_PROGRESS)) { + ep->com.flags |= PEER_ABORT_IN_PROGRESS; return CPL_RET_BUF_DONE; } diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.h b/drivers/infiniband/hw/cxgb3/iwch_cm.h index d7c7e09..43c0aea 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.h +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.h @@ -147,6 +147,7 @@ enum iwch_ep_state { enum iwch_ep_flags { PEER_ABORT_IN_PROGRESS = (1 << 0), ABORT_REQ_IN_PROGRESS = (1 << 1), + RELEASE_RESOURCES = (1 << 2), }; struct iwch_ep_common { @@ -161,6 +162,7 @@ struct iwch_ep_common { wait_queue_head_t waitq; int rpl_done; int rpl_err; + u32 flags; }; struct iwch_listen_ep { @@ -188,7 +190,6 @@ struct iwch_ep { u16 plen; u32 ird; u32 ord; - u32 flags; }; static inline struct iwch_ep *to_ep(struct iw_cm_id *cm_id) -- cgit v0.10.2 From a18b83b7ef3c98cd8b4bb885e4a649a8f30fb7b0 Mon Sep 17 00:00:00 2001 From: Bharata B Rao Date: Mon, 23 Mar 2009 10:02:53 +0530 Subject: cpuacct: make cpuacct hierarchy walk in cpuacct_charge() safe when rcupreempt is used -v2 Impact: fix cgroups race under rcu-preempt cpuacct_charge() obtains task's ca and does a hierarchy walk upwards. This can race with the task's movement between cgroups. This race can cause an access to freed ca pointer in cpuacct_charge() or access to invalid cgroups pointer of the task. This will not happen with rcu or tree rcu as cpuacct_charge() is called with preemption disabled. However if rcupreempt is used, the race is seen. Thanks to Li Zefan for explaining this. Fix this race by explicitly protecting ca and the hierarchy walk with rcu_read_lock(). Changes for v2: - Update patch descrition (as per Li Zefan's review comments). - Remove comments in cpuacct_charge() which explained why rcu_read_lock() was needed (as per Peter Zijlstra's review comments). Signed-off-by: Bharata B Rao Cc: Dhaval Giani Cc: Li Zefan Cc: Paul Menage Cc: KAMEZAWA Hiroyuki Acked-by: Peter Zijlstra Acked-by: Balbir Singh Tested-by: Balbir Singh Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 186c6fd..cc397aa 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9654,12 +9654,17 @@ static void cpuacct_charge(struct task_struct *tsk, u64 cputime) return; cpu = task_cpu(tsk); + + rcu_read_lock(); + ca = task_ca(tsk); for (; ca; ca = ca->parent) { u64 *cpuusage = percpu_ptr(ca->cpuusage, cpu); *cpuusage += cputime; } + + rcu_read_unlock(); } struct cgroup_subsys cpuacct_subsys = { -- cgit v0.10.2 From 352b09edd7fa8145bfc9e5db0cc0fed971b69440 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 31 Mar 2009 09:54:15 -0700 Subject: mlx4_core: Don't leak mailbox for SET_PORT on Ethernet ports Commit 793730bf ("mlx4_core: Don't perform SET_PORT command for Ethernet ports") introduced a leak of mailbox buffers when SET_PORT was called for Ethernet ports, since it added a return after the mailbox was allocated. Fix this by checking the port type and returning *before* allocating the mailbox. Signed-off-by: Roland Dreier diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c index 7cce334..606aa58 100644 --- a/drivers/net/mlx4/port.c +++ b/drivers/net/mlx4/port.c @@ -299,13 +299,14 @@ int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) struct mlx4_cmd_mailbox *mailbox; int err; + if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH) + return 0; + mailbox = mlx4_alloc_cmd_mailbox(dev); if (IS_ERR(mailbox)) return PTR_ERR(mailbox); memset(mailbox->buf, 0, 256); - if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH) - return 0; ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port]; err = mlx4_cmd(dev, mailbox->dma, port, 0, MLX4_CMD_SET_PORT, -- cgit v0.10.2 From edb5abb1e2a84fd8802a3577d95eac84fe1405ab Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 31 Mar 2009 10:22:32 -0700 Subject: IPoIB: Avoid free_netdev() BUG when destroying a child interface We have to release the RTNL before calling free_netdev() so that the device state has a chance to become NETREG_UNREGISTERED. Otherwise when removing a child interface, we hit the BUG() that tests the device state in free_netdev(). Reported-by: Yossi Etigin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 5a76a55..4c57f32 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -70,12 +70,14 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) */ if (ppriv->pkey == pkey) { result = -ENOTUNIQ; + priv = NULL; goto err; } list_for_each_entry(priv, &ppriv->child_intfs, list) { if (priv->pkey == pkey) { result = -ENOTUNIQ; + priv = NULL; goto err; } } @@ -96,7 +98,7 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) result = ipoib_set_dev_features(priv, ppriv->ca); if (result) - goto device_init_failed; + goto err; priv->pkey = pkey; @@ -109,7 +111,7 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) ipoib_warn(ppriv, "failed to initialize subinterface: " "device %s, port %d", ppriv->ca->name, ppriv->port); - goto device_init_failed; + goto err; } result = register_netdevice(priv->dev); @@ -146,19 +148,19 @@ sysfs_failed: register_failed: ipoib_dev_cleanup(priv->dev); -device_init_failed: - free_netdev(priv->dev); - err: mutex_unlock(&ppriv->vlan_mutex); rtnl_unlock(); + if (priv) + free_netdev(priv->dev); + return result; } int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey) { struct ipoib_dev_priv *ppriv, *priv, *tpriv; - int ret = -ENOENT; + struct net_device *dev = NULL; if (!capable(CAP_NET_ADMIN)) return -EPERM; @@ -172,14 +174,17 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey) unregister_netdevice(priv->dev); ipoib_dev_cleanup(priv->dev); list_del(&priv->list); - free_netdev(priv->dev); - - ret = 0; + dev = priv->dev; break; } } mutex_unlock(&ppriv->vlan_mutex); rtnl_unlock(); - return ret; + if (dev) { + free_netdev(dev); + return 0; + } + + return -ENODEV; } -- cgit v0.10.2 From 4fafd5b03875612a24a5b17dac0c63217a65de42 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Mon, 30 Mar 2009 14:50:04 +0800 Subject: tracing: move scripts/trace/power.pl to scripts/tracing/power.pl Impact: Cleanup We use scripts/tracing/ to contain tracing scripts. Use one directory only instead of two. Signed-off-by: Lai Jiangshan Cc: Arjan van de Ven Cc: Steven Rostedt LKML-Reference: <49D06B9C.3070209@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/scripts/trace/power.pl b/scripts/trace/power.pl deleted file mode 100644 index 4f729b3..0000000 --- a/scripts/trace/power.pl +++ /dev/null @@ -1,108 +0,0 @@ -#!/usr/bin/perl - -# Copyright 2008, Intel Corporation -# -# This file is part of the Linux kernel -# -# This program file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program in a file named COPYING; if not, write to the -# Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, -# Boston, MA 02110-1301 USA -# -# Authors: -# Arjan van de Ven - - -# -# This script turns a cstate ftrace output into a SVG graphic that shows -# historic C-state information -# -# -# cat /sys/kernel/debug/tracing/trace | perl power.pl > out.svg -# - -my @styles; -my $base = 0; - -my @pstate_last; -my @pstate_level; - -$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; -$styles[8] = "fill:rgb(0,25,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; - - -print " \n"; -print "\n"; - -my $scale = 30000.0; -while (<>) { - my $line = $_; - if ($line =~ /([0-9\.]+)\] CSTATE: Going to C([0-9]) on cpu ([0-9]+) for ([0-9\.]+)/) { - if ($base == 0) { - $base = $1; - } - my $time = $1 - $base; - $time = $time * $scale; - my $C = $2; - my $cpu = $3; - my $y = 400 * $cpu; - my $duration = $4 * $scale; - my $msec = int($4 * 100000)/100.0; - my $height = $C * 20; - $style = $styles[$C]; - - $y = $y + 140 - $height; - - $x2 = $time + 4; - $y2 = $y + 4; - - - print "\n"; - print "C$C $msec\n"; - } - if ($line =~ /([0-9\.]+)\] PSTATE: Going to P([0-9]) on cpu ([0-9]+)/) { - my $time = $1 - $base; - my $state = $2; - my $cpu = $3; - - if (defined($pstate_last[$cpu])) { - my $from = $pstate_last[$cpu]; - my $oldstate = $pstate_state[$cpu]; - my $duration = ($time-$from) * $scale; - - $from = $from * $scale; - my $to = $from + $duration; - my $height = 140 - ($oldstate * (140/8)); - - my $y = 400 * $cpu + 200 + $height; - my $y2 = $y+4; - my $style = $styles[8]; - - print "\n"; - print "P$oldstate (cpu $cpu)\n"; - }; - - $pstate_last[$cpu] = $time; - $pstate_state[$cpu] = $state; - } -} - - -print "\n"; diff --git a/scripts/tracing/power.pl b/scripts/tracing/power.pl new file mode 100644 index 0000000..4f729b3 --- /dev/null +++ b/scripts/tracing/power.pl @@ -0,0 +1,108 @@ +#!/usr/bin/perl + +# Copyright 2008, Intel Corporation +# +# This file is part of the Linux kernel +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# +# Authors: +# Arjan van de Ven + + +# +# This script turns a cstate ftrace output into a SVG graphic that shows +# historic C-state information +# +# +# cat /sys/kernel/debug/tracing/trace | perl power.pl > out.svg +# + +my @styles; +my $base = 0; + +my @pstate_last; +my @pstate_level; + +$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; +$styles[8] = "fill:rgb(0,25,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)"; + + +print " \n"; +print "\n"; + +my $scale = 30000.0; +while (<>) { + my $line = $_; + if ($line =~ /([0-9\.]+)\] CSTATE: Going to C([0-9]) on cpu ([0-9]+) for ([0-9\.]+)/) { + if ($base == 0) { + $base = $1; + } + my $time = $1 - $base; + $time = $time * $scale; + my $C = $2; + my $cpu = $3; + my $y = 400 * $cpu; + my $duration = $4 * $scale; + my $msec = int($4 * 100000)/100.0; + my $height = $C * 20; + $style = $styles[$C]; + + $y = $y + 140 - $height; + + $x2 = $time + 4; + $y2 = $y + 4; + + + print "\n"; + print "C$C $msec\n"; + } + if ($line =~ /([0-9\.]+)\] PSTATE: Going to P([0-9]) on cpu ([0-9]+)/) { + my $time = $1 - $base; + my $state = $2; + my $cpu = $3; + + if (defined($pstate_last[$cpu])) { + my $from = $pstate_last[$cpu]; + my $oldstate = $pstate_state[$cpu]; + my $duration = ($time-$from) * $scale; + + $from = $from * $scale; + my $to = $from + $duration; + my $height = 140 - ($oldstate * (140/8)); + + my $y = 400 * $cpu + 200 + $height; + my $y2 = $y+4; + my $style = $styles[8]; + + print "\n"; + print "P$oldstate (cpu $cpu)\n"; + }; + + $pstate_last[$cpu] = $time; + $pstate_state[$cpu] = $state; + } +} + + +print "\n"; -- cgit v0.10.2 From 13b8bd0a5713bdf05659019badd7c0407984ece1 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 25 Mar 2009 15:01:22 +1030 Subject: sched_rt: don't allocate cpumask in fastpath Impact: cleanup As pointed out by Steven Rostedt. Since the arg in question is unused, we simply change cpupri_find() to accept NULL. Reported-by: Steven Rostedt Signed-off-by: Rusty Russell LKML-Reference: <200903251501.22664.rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c index 1e00bfa..cdd3c89 100644 --- a/kernel/sched_cpupri.c +++ b/kernel/sched_cpupri.c @@ -55,7 +55,7 @@ static int convert_prio(int prio) * cpupri_find - find the best (lowest-pri) CPU in the system * @cp: The cpupri context * @p: The task - * @lowest_mask: A mask to fill in with selected CPUs + * @lowest_mask: A mask to fill in with selected CPUs (or NULL) * * Note: This function returns the recommended CPUs as calculated during the * current invokation. By the time the call returns, the CPUs may have in @@ -81,7 +81,8 @@ int cpupri_find(struct cpupri *cp, struct task_struct *p, if (cpumask_any_and(&p->cpus_allowed, vec->mask) >= nr_cpu_ids) continue; - cpumask_and(lowest_mask, &p->cpus_allowed, vec->mask); + if (lowest_mask) + cpumask_and(lowest_mask, &p->cpus_allowed, vec->mask); return 1; } diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index bac1061..fbec5a5 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -805,20 +805,15 @@ static int select_task_rq_rt(struct task_struct *p, int sync) static void check_preempt_equal_prio(struct rq *rq, struct task_struct *p) { - cpumask_var_t mask; - if (rq->curr->rt.nr_cpus_allowed == 1) return; - if (!alloc_cpumask_var(&mask, GFP_ATOMIC)) - return; - if (p->rt.nr_cpus_allowed != 1 - && cpupri_find(&rq->rd->cpupri, p, mask)) - goto free; + && cpupri_find(&rq->rd->cpupri, p, NULL)) + return; - if (!cpupri_find(&rq->rd->cpupri, rq->curr, mask)) - goto free; + if (!cpupri_find(&rq->rd->cpupri, rq->curr, NULL)) + return; /* * There appears to be other cpus that can accept @@ -827,8 +822,6 @@ static void check_preempt_equal_prio(struct rq *rq, struct task_struct *p) */ requeue_task_rt(rq, p, 1); resched_task(rq->curr); -free: - free_cpumask_var(mask); } #endif /* CONFIG_SMP */ -- cgit v0.10.2 From c5f8d99585d7b5b7e857fabf8aefd0174903a98c Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Tue, 31 Mar 2009 16:56:03 +0900 Subject: posixtimers, sched: Fix posix clock monotonicity Impact: Regression fix (against clock_gettime() backwarding bug) This patch re-introduces a couple of functions, task_sched_runtime and thread_group_sched_runtime, which was once removed at the time of 2.6.28-rc1. These functions protect the sampling of thread/process clock with rq lock. This rq lock is required not to update rq->clock during the sampling. i.e. The clock_gettime() may return ((accounted runtime before update) + (delta after update)) that is less than what it should be. v2 -> v3: - Rename static helper function __task_delta_exec() to do_task_delta_exec() since -tip tree already has a __task_delta_exec() of different version. v1 -> v2: - Revises comments of function and patch description. - Add note about accuracy of thread group's runtime. Signed-off-by: Hidetoshi Seto Acked-by: Peter Zijlstra Cc: stable@kernel.org [2.6.28.x][2.6.29.x] LKML-Reference: <49D1CC93.4080401@jp.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index fa07da9..4318c30 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -224,7 +224,7 @@ static int cpu_clock_sample(const clockid_t which_clock, struct task_struct *p, cpu->cpu = virt_ticks(p); break; case CPUCLOCK_SCHED: - cpu->sched = p->se.sum_exec_runtime + task_delta_exec(p); + cpu->sched = task_sched_runtime(p); break; } return 0; @@ -240,18 +240,19 @@ static int cpu_clock_sample_group(const clockid_t which_clock, { struct task_cputime cputime; - thread_group_cputime(p, &cputime); switch (CPUCLOCK_WHICH(which_clock)) { default: return -EINVAL; case CPUCLOCK_PROF: + thread_group_cputime(p, &cputime); cpu->cpu = cputime_add(cputime.utime, cputime.stime); break; case CPUCLOCK_VIRT: + thread_group_cputime(p, &cputime); cpu->cpu = cputime.utime; break; case CPUCLOCK_SCHED: - cpu->sched = cputime.sum_exec_runtime + task_delta_exec(p); + cpu->sched = thread_group_sched_runtime(p); break; } return 0; diff --git a/kernel/sched.c b/kernel/sched.c index cc397aa..c8d7f17 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4139,9 +4139,25 @@ DEFINE_PER_CPU(struct kernel_stat, kstat); EXPORT_PER_CPU_SYMBOL(kstat); /* - * Return any ns on the sched_clock that have not yet been banked in + * Return any ns on the sched_clock that have not yet been accounted in * @p in case that task is currently running. + * + * Called with task_rq_lock() held on @rq. */ +static u64 do_task_delta_exec(struct task_struct *p, struct rq *rq) +{ + u64 ns = 0; + + if (task_current(rq, p)) { + update_rq_clock(rq); + ns = rq->clock - p->se.exec_start; + if ((s64)ns < 0) + ns = 0; + } + + return ns; +} + unsigned long long task_delta_exec(struct task_struct *p) { unsigned long flags; @@ -4149,16 +4165,49 @@ unsigned long long task_delta_exec(struct task_struct *p) u64 ns = 0; rq = task_rq_lock(p, &flags); + ns = do_task_delta_exec(p, rq); + task_rq_unlock(rq, &flags); - if (task_current(rq, p)) { - u64 delta_exec; + return ns; +} - update_rq_clock(rq); - delta_exec = rq->clock - p->se.exec_start; - if ((s64)delta_exec > 0) - ns = delta_exec; - } +/* + * Return accounted runtime for the task. + * In case the task is currently running, return the runtime plus current's + * pending runtime that have not been accounted yet. + */ +unsigned long long task_sched_runtime(struct task_struct *p) +{ + unsigned long flags; + struct rq *rq; + u64 ns = 0; + + rq = task_rq_lock(p, &flags); + ns = p->se.sum_exec_runtime + do_task_delta_exec(p, rq); + task_rq_unlock(rq, &flags); + + return ns; +} +/* + * Return sum_exec_runtime for the thread group. + * In case the task is currently running, return the sum plus current's + * pending runtime that have not been accounted yet. + * + * Note that the thread group might have other running tasks as well, + * so the return value not includes other pending runtime that other + * running tasks might have. + */ +unsigned long long thread_group_sched_runtime(struct task_struct *p) +{ + struct task_cputime totals; + unsigned long flags; + struct rq *rq; + u64 ns; + + rq = task_rq_lock(p, &flags); + thread_group_cputime(p, &totals); + ns = totals.sum_exec_runtime + do_task_delta_exec(p, rq); task_rq_unlock(rq, &flags); return ns; -- cgit v0.10.2 From ef12fefabf94b6a902ad3abd3eb124b00560c445 Mon Sep 17 00:00:00 2001 From: Bharata B Rao Date: Tue, 31 Mar 2009 10:02:22 +0530 Subject: cpuacct: add per-cgroup utime/stime statistics Add per-cgroup cpuacct controller statistics like the system and user time consumed by the group of tasks. Changelog: v7 - Changed the name of the statistic from utime to user and from stime to system so that in future we could easily add other statistics like irq, softirq, steal times etc easily. v6 - Fixed a bug in the error path of cpuacct_create() (pointed by Li Zefan). v5 - In cpuacct_stats_show(), use cputime64_to_clock_t() since we are operating on a 64bit variable here. v4 - Remove comments in cpuacct_update_stats() which explained why rcu_read_lock() was needed (as per Peter Zijlstra's review comments). - Don't say that percpu_counter_read() is broken in Documentation/cpuacct.txt as per KAMEZAWA Hiroyuki's review comments. v3 - Fix a small race in the cpuacct hierarchy walk. v2 - stime and utime now exported in clock_t units instead of msecs. - Addressed the code review comments from Balbir and Li Zefan. - Moved to -tip tree. v1 - Moved the stime/utime accounting to cpuacct controller. Earlier versions - http://lkml.org/lkml/2009/2/25/129 Signed-off-by: Bharata B Rao Signed-off-by: Balaji Rao Cc: Dhaval Giani Cc: Paul Menage Cc: Andrew Morton Cc: KAMEZAWA Hiroyuki Reviewed-by: Li Zefan Acked-by: Peter Zijlstra Acked-by: Balbir Singh Tested-by: Balbir Singh LKML-Reference: <20090331043222.GA4093@in.ibm.com> Signed-off-by: Ingo Molnar diff --git a/Documentation/cgroups/cpuacct.txt b/Documentation/cgroups/cpuacct.txt index bb775fb..8b93094 100644 --- a/Documentation/cgroups/cpuacct.txt +++ b/Documentation/cgroups/cpuacct.txt @@ -30,3 +30,21 @@ The above steps create a new group g1 and move the current shell process (bash) into it. CPU time consumed by this bash and its children can be obtained from g1/cpuacct.usage and the same is accumulated in /cgroups/cpuacct.usage also. + +cpuacct.stat file lists a few statistics which further divide the +CPU time obtained by the cgroup into user and system times. Currently +the following statistics are supported: + +user: Time spent by tasks of the cgroup in user mode. +system: Time spent by tasks of the cgroup in kernel mode. + +user and system are in USER_HZ unit. + +cpuacct controller uses percpu_counter interface to collect user and +system times. This has two side effects: + +- It is theoretically possible to see wrong values for user and system times. + This is because percpu_counter_read() on 32bit systems isn't safe + against concurrent writes. +- It is possible to see slightly outdated values for user and system times + due to the batch processing nature of percpu_counter. diff --git a/kernel/sched.c b/kernel/sched.c index c8d7f17..8d1bdbe 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1393,10 +1393,22 @@ iter_move_one_task(struct rq *this_rq, int this_cpu, struct rq *busiest, struct rq_iterator *iterator); #endif +/* Time spent by the tasks of the cpu accounting group executing in ... */ +enum cpuacct_stat_index { + CPUACCT_STAT_USER, /* ... user mode */ + CPUACCT_STAT_SYSTEM, /* ... kernel mode */ + + CPUACCT_STAT_NSTATS, +}; + #ifdef CONFIG_CGROUP_CPUACCT static void cpuacct_charge(struct task_struct *tsk, u64 cputime); +static void cpuacct_update_stats(struct task_struct *tsk, + enum cpuacct_stat_index idx, cputime_t val); #else static inline void cpuacct_charge(struct task_struct *tsk, u64 cputime) {} +static inline void cpuacct_update_stats(struct task_struct *tsk, + enum cpuacct_stat_index idx, cputime_t val) {} #endif static inline void inc_cpu_load(struct rq *rq, unsigned long load) @@ -4236,6 +4248,8 @@ void account_user_time(struct task_struct *p, cputime_t cputime, cpustat->nice = cputime64_add(cpustat->nice, tmp); else cpustat->user = cputime64_add(cpustat->user, tmp); + + cpuacct_update_stats(p, CPUACCT_STAT_USER, cputime); /* Account for user time used */ acct_update_integrals(p); } @@ -4297,6 +4311,8 @@ void account_system_time(struct task_struct *p, int hardirq_offset, else cpustat->system = cputime64_add(cpustat->system, tmp); + cpuacct_update_stats(p, CPUACCT_STAT_SYSTEM, cputime); + /* Account for system time used */ acct_update_integrals(p); } @@ -9539,6 +9555,7 @@ struct cpuacct { struct cgroup_subsys_state css; /* cpuusage holds pointer to a u64-type object on every cpu */ u64 *cpuusage; + struct percpu_counter cpustat[CPUACCT_STAT_NSTATS]; struct cpuacct *parent; }; @@ -9563,20 +9580,32 @@ static struct cgroup_subsys_state *cpuacct_create( struct cgroup_subsys *ss, struct cgroup *cgrp) { struct cpuacct *ca = kzalloc(sizeof(*ca), GFP_KERNEL); + int i; if (!ca) - return ERR_PTR(-ENOMEM); + goto out; ca->cpuusage = alloc_percpu(u64); - if (!ca->cpuusage) { - kfree(ca); - return ERR_PTR(-ENOMEM); - } + if (!ca->cpuusage) + goto out_free_ca; + + for (i = 0; i < CPUACCT_STAT_NSTATS; i++) + if (percpu_counter_init(&ca->cpustat[i], 0)) + goto out_free_counters; if (cgrp->parent) ca->parent = cgroup_ca(cgrp->parent); return &ca->css; + +out_free_counters: + while (--i >= 0) + percpu_counter_destroy(&ca->cpustat[i]); + free_percpu(ca->cpuusage); +out_free_ca: + kfree(ca); +out: + return ERR_PTR(-ENOMEM); } /* destroy an existing cpu accounting group */ @@ -9584,7 +9613,10 @@ static void cpuacct_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp) { struct cpuacct *ca = cgroup_ca(cgrp); + int i; + for (i = 0; i < CPUACCT_STAT_NSTATS; i++) + percpu_counter_destroy(&ca->cpustat[i]); free_percpu(ca->cpuusage); kfree(ca); } @@ -9671,6 +9703,25 @@ static int cpuacct_percpu_seq_read(struct cgroup *cgroup, struct cftype *cft, return 0; } +static const char *cpuacct_stat_desc[] = { + [CPUACCT_STAT_USER] = "user", + [CPUACCT_STAT_SYSTEM] = "system", +}; + +static int cpuacct_stats_show(struct cgroup *cgrp, struct cftype *cft, + struct cgroup_map_cb *cb) +{ + struct cpuacct *ca = cgroup_ca(cgrp); + int i; + + for (i = 0; i < CPUACCT_STAT_NSTATS; i++) { + s64 val = percpu_counter_read(&ca->cpustat[i]); + val = cputime64_to_clock_t(val); + cb->fill(cb, cpuacct_stat_desc[i], val); + } + return 0; +} + static struct cftype files[] = { { .name = "usage", @@ -9681,7 +9732,10 @@ static struct cftype files[] = { .name = "usage_percpu", .read_seq_string = cpuacct_percpu_seq_read, }, - + { + .name = "stat", + .read_map = cpuacct_stats_show, + }, }; static int cpuacct_populate(struct cgroup_subsys *ss, struct cgroup *cgrp) @@ -9716,6 +9770,27 @@ static void cpuacct_charge(struct task_struct *tsk, u64 cputime) rcu_read_unlock(); } +/* + * Charge the system/user time to the task's accounting group. + */ +static void cpuacct_update_stats(struct task_struct *tsk, + enum cpuacct_stat_index idx, cputime_t val) +{ + struct cpuacct *ca; + + if (unlikely(!cpuacct_subsys.active)) + return; + + rcu_read_lock(); + ca = task_ca(tsk); + + do { + percpu_counter_add(&ca->cpustat[idx], val); + ca = ca->parent; + } while (ca); + rcu_read_unlock(); +} + struct cgroup_subsys cpuacct_subsys = { .name = "cpuacct", .create = cpuacct_create, -- cgit v0.10.2 From 46e0bb9c12f4bab539736f1714cbf16600f681ec Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Mon, 30 Mar 2009 10:25:20 +0530 Subject: sched: Print sched_group::__cpu_power in sched_domain_debug Impact: extend debug info /proc/sched_debug If the user changes the value of the sched_mc/smt_power_savings sysfs tunable, it'll trigger a rebuilding of the whole sched_domain tree, with the SD_POWERSAVINGS_BALANCE flag set at certain levels. As a result, there would be a change in the __cpu_power of sched_groups in the sched_domain hierarchy. Print the __cpu_power values for each sched_group in sched_domain_debug to help verify this change and correlate it with the change in the load-balancing behavior. Signed-off-by: Gautham R Shenoy Cc: Peter Zijlstra LKML-Reference: <20090330045520.2869.24777.stgit@sofia.in.ibm.com> Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 8d1bdbe..6234d10 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6963,7 +6963,8 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, cpumask_or(groupmask, groupmask, sched_group_cpus(group)); cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group)); - printk(KERN_CONT " %s", str); + printk(KERN_CONT " %s (__cpu_power = %d)", str, + group->__cpu_power); group = group->next; } while (group != sd->groups); -- cgit v0.10.2 From 84adeee9aaa0d81712de1e0ea74caed3398e4a1d Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 1 Apr 2009 13:55:32 -0700 Subject: RDMA/cma: Use rate from IPoIB broadcast when joining IPoIB multicast groups When joining an IPoIB multicast group, use the same rate as in the broadcast group. Otherwise, if the RDMA CM creates this group before IPoIB does, it might get a different rate. This will cause IPoIB to fail joining to the same group later on, because IPoIB uses strict rate selection. Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 2a2e508..3f9c03a 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2713,6 +2713,10 @@ static int cma_join_ib_multicast(struct rdma_id_private *id_priv, IB_SA_MCMEMBER_REC_FLOW_LABEL | IB_SA_MCMEMBER_REC_TRAFFIC_CLASS; + if (id_priv->id.ps == RDMA_PS_IPOIB) + comp_mask |= IB_SA_MCMEMBER_REC_RATE | + IB_SA_MCMEMBER_REC_RATE_SELECTOR; + mc->multicast.ib = ib_sa_join_multicast(&sa_client, id_priv->id.device, id_priv->id.port_num, &rec, comp_mask, GFP_KERNEL, -- cgit v0.10.2 From 633fe795b80693a8198e7d82f66538a72d2bbba2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 Apr 2009 17:47:23 -0700 Subject: timers: add missing kernel-doc Add missing kernel-doc parameter notation and change function name to its new name: Warning(kernel/timer.c:543): No description found for parameter 'name' Warning(kernel/timer.c:543): No description found for parameter 'key' Signed-off-by: Randy Dunlap Cc: akpm Cc: Johannes Berg LKML-Reference: <20090401174723.f0bea0eb.randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar diff --git a/kernel/timer.c b/kernel/timer.c index 9b77fc9..3af9a0b 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -524,10 +524,13 @@ static void __init_timer(struct timer_list *timer) } /** - * init_timer - initialize a timer. + * init_timer_key - initialize a timer * @timer: the timer to be initialized + * @name: name of the timer + * @key: lockdep class key of the fake lock used for tracking timer + * sync lock dependencies * - * init_timer() must be done to a timer prior calling *any* of the + * init_timer_key() must be done to a timer prior calling *any* of the * other timer functions. */ void init_timer(struct timer_list *timer) -- cgit v0.10.2 From cd84a42f315e50edd454c27a3da3951ccd3d735a Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Thu, 2 Apr 2009 14:19:38 -0700 Subject: futex: comment requeue key reference semantics We've tripped over the futex_requeue drop_count refering to key2 instead of key1. The code is actually correct, but is non-intuitive. This patch adds an explicit comment explaining the requeue. Signed-off-by: Darren Hart Cc: Peter Zijlstra Cc: Nick Piggin Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/kernel/futex.c b/kernel/futex.c index 6b50a02..eef8cd2 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -883,7 +883,12 @@ retry_private: out_unlock: double_unlock_hb(hb1, hb2); - /* drop_futex_key_refs() must be called outside the spinlocks. */ + /* + * drop_futex_key_refs() must be called outside the spinlocks. During + * the requeue we moved futex_q's from the hash bucket at key1 to the + * one at key2 and updated their key pointer. We no longer need to + * hold the references to key1. + */ while (--drop_count >= 0) drop_futex_key_refs(&key1); -- cgit v0.10.2 From a4b3ada83d06554d307dd54abdc62b2e5648264a Mon Sep 17 00:00:00 2001 From: Carl Henrik Lunde Date: Fri, 3 Apr 2009 14:27:15 +0200 Subject: blktrace: NUL-terminate user space messages Impact: fix corrupted blkparse output Make sure messages from user space are NUL-terminated strings, otherwise we could dump random memory to the block trace file. Additionally, I've limited the message to BLK_TN_MAX_MSG-1 characters, because the last character would be stripped by vscnprintf anyway. Signed-off-by: Carl Henrik Lunde Cc: Li Zefan Cc: Arnaldo Carvalho de Melo Cc: "Alan D. Brunelle" Cc: Steven Rostedt LKML-Reference: <20090403122714.GT5178@kernel.dk> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 947c5b3..a400b86 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -327,10 +327,10 @@ static ssize_t blk_msg_write(struct file *filp, const char __user *buffer, char *msg; struct blk_trace *bt; - if (count > BLK_TN_MAX_MSG) + if (count > BLK_TN_MAX_MSG - 1) return -EINVAL; - msg = kmalloc(count, GFP_KERNEL); + msg = kmalloc(count + 1, GFP_KERNEL); if (msg == NULL) return -ENOMEM; @@ -339,6 +339,7 @@ static ssize_t blk_msg_write(struct file *filp, const char __user *buffer, return -EFAULT; } + msg[count] = '\0'; bt = filp->private_data; __trace_note_message(bt, "%s", msg); kfree(msg); -- cgit v0.10.2 From 7635b03adf3d7b84da7649b81efa91e6ebf11b85 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 3 Apr 2009 15:31:34 +0800 Subject: blktrace: small cleanup in blk_msg_write() Signed-off-by: Li Zefan Cc: Arnaldo Carvalho de Melo Cc: "Alan D. Brunelle" Cc: Jens Axboe LKML-Reference: <49D5BB56.7000807@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index a400b86..73d7860 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -327,7 +327,7 @@ static ssize_t blk_msg_write(struct file *filp, const char __user *buffer, char *msg; struct blk_trace *bt; - if (count > BLK_TN_MAX_MSG - 1) + if (count >= BLK_TN_MAX_MSG) return -EINVAL; msg = kmalloc(count + 1, GFP_KERNEL); -- cgit v0.10.2 From e2494e1b42ebac402324105d57646489d19e2b01 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 2 Apr 2009 13:43:26 +0800 Subject: blktrace: fix pdu_len when tracing packet command requests Impact: output all of packet commands - not just the first 4 / 8 bytes Since commit d7e3c3249ef23b4617393c69fe464765b4ff1645 ("block: add large command support"), struct request->cmd has been changed from unsinged char cmd[BLK_MAX_CDB] to unsigned char *cmd. v1 -> v2: by: FUJITA Tomonori - make sure rq->cmd_len is always intialized, and then we can use rq->cmd_len instead of BLK_MAX_CDB. Signed-off-by: Li Zefan Acked-by: FUJITA Tomonori Cc: Arnaldo Carvalho de Melo Cc: Steven Rostedt Cc: Frederic Weisbecker Cc: Jens Axboe LKML-Reference: <49D4507E.2060602@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/block/blk-core.c b/block/blk-core.c index 29bcfac..859879d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -132,6 +132,7 @@ void blk_rq_init(struct request_queue *q, struct request *rq) INIT_HLIST_NODE(&rq->hash); RB_CLEAR_NODE(&rq->rb_node); rq->cmd = rq->__cmd; + rq->cmd_len = BLK_MAX_CDB; rq->tag = -1; rq->ref_count = 1; } diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 73d7860..b32ff44 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -643,7 +643,7 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq, if (blk_pc_request(rq)) { what |= BLK_TC_ACT(BLK_TC_PC); __blk_add_trace(bt, 0, rq->data_len, rw, what, rq->errors, - sizeof(rq->cmd), rq->cmd); + rq->cmd_len, rq->cmd); } else { what |= BLK_TC_ACT(BLK_TC_FS); __blk_add_trace(bt, rq->hard_sector, rq->hard_nr_sectors << 9, -- cgit v0.10.2 From 9674f35b1ec17577163897f052f405c1e9e5893d Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Fri, 3 Apr 2009 08:34:05 -0500 Subject: x86: UV BAU and nodes with no memory This patch fixes BAU initialization for systems containing nodes with no memory and for systems with non-consecutive node numbers. Fixes and clarifies situations where pnode should be used instead of node id. Tested on the UV hardware simulator. Signed-off-by: Cliff Wickman LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 79c0732..b833bc6 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -32,6 +32,34 @@ static DEFINE_PER_CPU(struct ptc_stats, ptcstats); static DEFINE_PER_CPU(struct bau_control, bau_control); /* + * Determine the first node on a blade. + */ +static int __init blade_to_first_node(int blade) +{ + int node, b; + + for_each_online_node(node) { + b = uv_node_to_blade_id(node); + if (blade == b) + return node; + } + BUG(); +} + +/* + * Determine the apicid of the first cpu on a blade. + */ +static int __init blade_to_first_apicid(int blade) +{ + int cpu; + + for_each_present_cpu(cpu) + if (blade == uv_cpu_to_blade_id(cpu)) + return per_cpu(x86_cpu_to_apicid, cpu); + return -1; +} + +/* * Free a software acknowledge hardware resource by clearing its Pending * bit. This will return a reply to the sender. * If the message has timed out, a reply has already been sent by the @@ -67,7 +95,7 @@ static void uv_bau_process_message(struct bau_payload_queue_entry *msg, msp = __get_cpu_var(bau_control).msg_statuses + msg_slot; cpu = uv_blade_processor_id(); msg->number_of_cpus = - uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); + uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); this_cpu_mask = 1UL << cpu; if (msp->seen_by.bits & this_cpu_mask) return; @@ -215,14 +243,14 @@ static int uv_wait_completion(struct bau_desc *bau_desc, * Returns @flush_mask if some remote flushing remains to be done. The * mask will have some bits still set. */ -const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade, +const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode, struct bau_desc *bau_desc, struct cpumask *flush_mask) { int completion_status = 0; int right_shift; int tries = 0; - int blade; + int pnode; int bit; unsigned long mmr_offset; unsigned long index; @@ -265,8 +293,8 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade, * use the IPI method of shootdown on them. */ for_each_cpu(bit, flush_mask) { - blade = uv_cpu_to_blade_id(bit); - if (blade == this_blade) + pnode = uv_cpu_to_pnode(bit); + if (pnode == this_pnode) continue; cpumask_clear_cpu(bit, flush_mask); } @@ -308,16 +336,16 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, struct cpumask *flush_mask = &__get_cpu_var(flush_tlb_mask); int i; int bit; - int blade; + int pnode; int uv_cpu; - int this_blade; + int this_pnode; int locals = 0; struct bau_desc *bau_desc; cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu)); uv_cpu = uv_blade_processor_id(); - this_blade = uv_numa_blade_id(); + this_pnode = uv_hub_info->pnode; bau_desc = __get_cpu_var(bau_control).descriptor_base; bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu; @@ -325,13 +353,13 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, i = 0; for_each_cpu(bit, flush_mask) { - blade = uv_cpu_to_blade_id(bit); - BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1)); - if (blade == this_blade) { + pnode = uv_cpu_to_pnode(bit); + BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1)); + if (pnode == this_pnode) { locals++; continue; } - bau_node_set(blade, &bau_desc->distribution); + bau_node_set(pnode, &bau_desc->distribution); i++; } if (i == 0) { @@ -349,7 +377,7 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, bau_desc->payload.address = va; bau_desc->payload.sending_cpu = cpu; - return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask); + return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask); } /* @@ -481,8 +509,7 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data) stat->requestee, stat->onetlb, stat->alltlb, stat->s_retry, stat->d_retry, stat->ptc_i); seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n", - uv_read_global_mmr64(uv_blade_to_pnode - (uv_cpu_to_blade_id(cpu)), + uv_read_global_mmr64(uv_cpu_to_pnode(cpu), UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE), stat->sflush, stat->dflush, stat->retriesok, stat->nomsg, @@ -616,16 +643,18 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node) * finish the initialization of the per-blade control structures */ static void __init -uv_table_bases_finish(int blade, int node, int cur_cpu, +uv_table_bases_finish(int blade, struct bau_control *bau_tablesp, struct bau_desc *adp) { struct bau_control *bcp; - int i; + int cpu; - for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) { - bcp = (struct bau_control *)&per_cpu(bau_control, i); + for_each_present_cpu(cpu) { + if (blade != uv_cpu_to_blade_id(cpu)) + continue; + bcp = (struct bau_control *)&per_cpu(bau_control, cpu); bcp->bau_msg_head = bau_tablesp->va_queue_first; bcp->va_queue_first = bau_tablesp->va_queue_first; bcp->va_queue_last = bau_tablesp->va_queue_last; @@ -648,8 +677,7 @@ uv_activation_descriptor_init(int node, int pnode) struct bau_desc *adp; struct bau_desc *ad2; - adp = (struct bau_desc *) - kmalloc_node(16384, GFP_KERNEL, node); + adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node); BUG_ON(!adp); pa = __pa((unsigned long)adp); @@ -666,8 +694,7 @@ uv_activation_descriptor_init(int node, int pnode) for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) { memset(ad2, 0, sizeof(struct bau_desc)); ad2->header.sw_ack_flag = 1; - ad2->header.base_dest_nodeid = - uv_blade_to_pnode(uv_cpu_to_blade_id(0)); + ad2->header.base_dest_nodeid = uv_cpu_to_pnode(0); ad2->header.command = UV_NET_ENDPOINT_INTD; ad2->header.int_both = 1; /* @@ -714,8 +741,9 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) /* * Initialization of each UV blade's structures */ -static int __init uv_init_blade(int blade, int node, int cur_cpu) +static int __init uv_init_blade(int blade) { + int node; int pnode; unsigned long pa; unsigned long apicid; @@ -723,16 +751,17 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu) struct bau_payload_queue_entry *pqp; struct bau_control *bau_tablesp; + node = blade_to_first_node(blade); bau_tablesp = uv_table_bases_init(blade, node); pnode = uv_blade_to_pnode(blade); adp = uv_activation_descriptor_init(node, pnode); pqp = uv_payload_queue_init(node, pnode, bau_tablesp); - uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp); + uv_table_bases_finish(blade, bau_tablesp, adp); /* * the below initialization can't be in firmware because the * messaging IRQ will be determined by the OS */ - apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + apicid = blade_to_first_apicid(blade); pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG); if ((pa & 0xff) != UV_BAU_MESSAGE) { uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, @@ -747,9 +776,7 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu) static int __init uv_bau_init(void) { int blade; - int node; int nblades; - int last_blade; int cur_cpu; if (!is_uv_system()) @@ -758,29 +785,16 @@ static int __init uv_bau_init(void) uv_bau_retry_limit = 1; uv_nshift = uv_hub_info->n_val; uv_mmask = (1UL << uv_hub_info->n_val) - 1; - nblades = 0; - last_blade = -1; - cur_cpu = 0; - for_each_online_node(node) { - blade = uv_node_to_blade_id(node); - if (blade == last_blade) - continue; - last_blade = blade; - nblades++; - } + nblades = uv_num_possible_blades(); + uv_bau_table_bases = (struct bau_control **) kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); BUG_ON(!uv_bau_table_bases); - last_blade = -1; - for_each_online_node(node) { - blade = uv_node_to_blade_id(node); - if (blade == last_blade) - continue; - last_blade = blade; - uv_init_blade(blade, node, cur_cpu); - cur_cpu += uv_blade_nr_possible_cpus(blade); - } + for (blade = 0; blade < nblades; blade++) + if (uv_blade_nr_possible_cpus(blade)) + uv_init_blade(blade); + alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1); uv_enable_timeouts(); -- cgit v0.10.2 From c4c4688f72e638708e5f6b5c259699de82a36fec Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Fri, 3 Apr 2009 08:34:32 -0500 Subject: x86: UV BAU messaging timeouts This patch replaces a 'nop' uv_enable_timeouts() in the UV TLB shootdown code. (somehow, long ago that function got eviscerated) If any cpu in the destination node does not get interrupted by the message and post completion in a reasonable time the hardware should respond to the sender with an error. This function enables such timeouts. Tested on the UV hardware simulator. Signed-off-by: Cliff Wickman LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index db68ac8..2cae46c 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -17,6 +17,11 @@ /* ========================================================================= */ /* UVH_BAU_DATA_CONFIG */ /* ========================================================================= */ +#define UVH_LB_BAU_MISC_CONTROL 0x320170UL +#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15 +#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16 +#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL +/* 1011 timebase 7 (168millisec) * 3 ticks -> 500ms */ #define UVH_BAU_DATA_CONFIG 0x61680UL #define UVH_BAU_DATA_CONFIG_32 0x0438 diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index b833bc6..fced96e 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -445,24 +445,58 @@ void uv_bau_message_interrupt(struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * uv_enable_timeouts + * + * Each target blade (i.e. blades that have cpu's) needs to have + * shootdown message timeouts enabled. The timeout does not cause + * an interrupt, but causes an error message to be returned to + * the sender. + */ static void uv_enable_timeouts(void) { - int i; int blade; - int last_blade; + int nblades; int pnode; - int cur_cpu = 0; - unsigned long apicid; + unsigned long mmr_image; + + nblades = uv_num_possible_blades(); - last_blade = -1; - for_each_online_node(i) { - blade = uv_node_to_blade_id(i); - if (blade == last_blade) + for (blade = 0; blade < nblades; blade++) { + if (!uv_blade_nr_possible_cpus(blade)) continue; - last_blade = blade; - apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + pnode = uv_blade_to_pnode(blade); - cur_cpu += uv_blade_nr_possible_cpus(i); + mmr_image = + uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL); + /* + * Set the timeout period and then lock it in, in three + * steps; captures and locks in the period. + * + * To program the period, the SOFT_ACK_MODE must be off. + */ + mmr_image &= ~((unsigned long)1 << + UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + /* + * Set the 4-bit period. + */ + mmr_image &= ~((unsigned long)0xf << + UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD << + UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + /* + * Subsequent reversals of the timebase bit (3) cause an + * immediate timeout of one or all INTD resources as + * indicated in bits 2:0 (7 causes all of them to timeout). + */ + mmr_image |= ((unsigned long)1 << + UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); } } -- cgit v0.10.2 From 9756b15e1b58453a6fd54b85c1ad8515209e10bb Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 30 Mar 2009 20:37:20 -0700 Subject: irq: fix cpumask memory leak on offstack cpumask kernels Need to free the old cpumask for affinity and pending_mask. Signed-off-by: Yinghai Lu Acked-by: Rusty Russell LKML-Reference: <49D18FF0.50707@kernel.org> Signed-off-by: Ingo Molnar diff --git a/include/linux/irq.h b/include/linux/irq.h index 974890b..99d147e 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -482,6 +482,16 @@ static inline void init_copy_desc_masks(struct irq_desc *old_desc, #endif } +static inline void free_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ + free_cpumask_var(old_desc->affinity); + +#ifdef CONFIG_GENERIC_PENDING_IRQ + free_cpumask_var(old_desc->pending_mask); +#endif +} + #else /* !CONFIG_SMP */ static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu, @@ -495,6 +505,10 @@ static inline void init_copy_desc_masks(struct irq_desc *old_desc, { } +static inline void free_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ +} #endif /* CONFIG_SMP */ #endif /* _LINUX_IRQ_H */ diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c index 243d612..44bbdcb 100644 --- a/kernel/irq/numa_migrate.c +++ b/kernel/irq/numa_migrate.c @@ -54,6 +54,7 @@ static bool init_copy_one_irq_desc(int irq, struct irq_desc *old_desc, static void free_one_irq_desc(struct irq_desc *old_desc, struct irq_desc *desc) { free_kstat_irqs(old_desc, desc); + free_desc_masks(old_desc, desc); arch_free_chip_data(old_desc, desc); } -- cgit v0.10.2 From 1a544e659cbfce178395e9a090a47d1907d0cfa8 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 30 Mar 2009 17:52:40 -0500 Subject: x86, UV: system table in bios accessed after unmap Use the copy of UV system table in kernel memory, not the one in bios after unmapping. Signed-off-by: Russ Anderson LKML-Reference: <20090330225240.GA22776@sgi.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c index f638827..63a88e1 100644 --- a/arch/x86/kernel/bios_uv.c +++ b/arch/x86/kernel/bios_uv.c @@ -182,7 +182,8 @@ void uv_bios_init(void) memcpy(&uv_systab, tab, sizeof(struct uv_systab)); iounmap(tab); - printk(KERN_INFO "EFI UV System Table Revision %d\n", tab->revision); + printk(KERN_INFO "EFI UV System Table Revision %d\n", + uv_systab.revision); } #else /* !CONFIG_EFI */ -- cgit v0.10.2 From 6a891a24e4d0056c365a90ff2d71c38fd366b0d0 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Mon, 30 Mar 2009 09:01:11 -0500 Subject: x86, UV: Fix for nodes with memory and no cpus Fix initialization of UV blade information for systems that have nodes with memory but no cpus. Signed-off-by: Jack Steiner LKML-Reference: <20090330140111.GA18461@sgi.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 1248318..de1a50a 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -549,7 +549,8 @@ void __init uv_system_init(void) unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; int max_pnode = 0; - unsigned long mmr_base, present; + unsigned long mmr_base, present, paddr; + unsigned short pnode_mask; map_low_mmrs(); @@ -592,6 +593,7 @@ void __init uv_system_init(void) } } + pnode_mask = (1 << n_val) - 1; node_id.v = uv_read_local_mmr(UVH_NODE_ID); gnode_upper = (((unsigned long)node_id.s.node_id) & ~((1 << n_val) - 1)) << m_val; @@ -615,7 +617,7 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; uv_cpu_hub_info(cpu)->pnode = pnode; - uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1; + uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; @@ -631,6 +633,16 @@ void __init uv_system_init(void) lcpu, blade); } + /* Add blade/pnode info for nodes without cpus */ + for_each_online_node(nid) { + if (uv_node_to_blade[nid] >= 0) + continue; + paddr = node_start_pfn(nid) << PAGE_SHIFT; + pnode = (paddr >> m_val) & pnode_mask; + blade = boot_pnode_to_blade(pnode); + uv_node_to_blade[nid] = blade; + } + map_gru_high(max_pnode); map_mmr_high(max_pnode); map_config_high(max_pnode); -- cgit v0.10.2 From eb650b9ed0f69be075a5a86ef9c4fc2cf7915293 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sat, 31 Jan 2009 12:13:57 +0100 Subject: [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power With this patch, the bq24022 battery charger is controlled by the USB gadget framework (via gpio_vbus) when connected to USB. To compile, this patch depends on the "regulator: Allow init data to be supplied for bq24022" patch (queued for next in the regulator tree) to add the init_data field to struct bq24022_mach_info. It also depends on the "add optional OTG transceiver and voltage regulator support to pda_power" patch (queued for next in the power supply tree) to enable charging when connected to the AC charger. Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 82428c2..f56837f 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1183,7 +1183,11 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SA1100=y # CONFIG_RTC_DRV_PXA is not set # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +CONFIG_REGULATOR_BQ24022=y # CONFIG_UIO is not set # CONFIG_STAGING is not set diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 82a399f..20ef37d 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -27,7 +27,7 @@ #define GPIO22_MAGICIAN_VIBRA_EN 22 #define GPIO26_MAGICIAN_GSM_POWER 26 #define GPIO27_MAGICIAN_USBC_PUEN 27 -#define GPIO30_MAGICIAN_nCHARGE_EN 30 +#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30 #define GPIO37_MAGICIAN_KEY_HANGUP 37 #define GPIO38_MAGICIAN_KEY_CONTACTS 38 #define GPIO40_MAGICIAN_GSM_OUT2 40 @@ -98,7 +98,7 @@ #define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) #define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) #define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) #define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) /* input */ diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index d46b367..2f75387 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #include @@ -553,33 +555,7 @@ static struct platform_device gpio_vbus = { static int power_supply_init(struct device *dev) { - int ret; - - ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); - if (ret) - goto err_cs_ac; - ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB"); - if (ret) - goto err_cs_usb; - ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN"); - if (ret) - goto err_chg_en; - ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN"); - if (!ret) - ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0); - if (ret) - goto err_nchg_en; - - return 0; - -err_nchg_en: - gpio_free(EGPIO_MAGICIAN_CHARGE_EN); -err_chg_en: - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); -err_cs_usb: - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); -err_cs_ac: - return ret; + return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); } static int magician_is_ac_online(void) @@ -587,22 +563,8 @@ static int magician_is_ac_online(void) return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); } -static int magician_is_usb_online(void) -{ - return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB); -} - -static void magician_set_charge(int flags) -{ - gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags); - gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags); -} - static void power_supply_exit(struct device *dev) { - gpio_free(GPIO30_MAGICIAN_nCHARGE_EN); - gpio_free(EGPIO_MAGICIAN_CHARGE_EN); - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); } @@ -613,8 +575,6 @@ static char *magician_supplicants[] = { static struct pda_power_pdata power_supply_info = { .init = power_supply_init, .is_ac_online = magician_is_ac_online, - .is_usb_online = magician_is_usb_online, - .set_charge = magician_set_charge, .exit = power_supply_exit, .supplied_to = magician_supplicants, .num_supplicants = ARRAY_SIZE(magician_supplicants), @@ -647,6 +607,43 @@ static struct platform_device power_supply = { .num_resources = ARRAY_SIZE(power_supply_resources), }; +/* + * Battery charger + */ + +static struct regulator_consumer_supply bq24022_consumers[] = { + { + .dev = &gpio_vbus.dev, + .supply = "vbus_draw", + }, + { + .dev = &power_supply.dev, + .supply = "ac_draw", + }, +}; + +static struct regulator_init_data bq24022_init_data = { + .constraints = { + .max_uA = 500000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), + .consumer_supplies = bq24022_consumers, +}; + +static struct bq24022_mach_info bq24022_info = { + .gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2, + .init_data = &bq24022_init_data, +}; + +static struct platform_device bq24022 = { + .name = "bq24022", + .id = -1, + .dev = { + .platform_data = &bq24022_info, + }, +}; /* * MMC/SD @@ -757,6 +754,7 @@ static struct platform_device *devices[] __initdata = { &egpio, &backlight, &pasic3, + &bq24022, &gpio_vbus, &power_supply, &strataflash, -- cgit v0.10.2 From c9be0e39618984b925ec758c1384853db4435ea8 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Tue, 3 Feb 2009 09:15:30 +0200 Subject: [ARM] pxa/em-x270: add libertas device registration Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 920dfb8..67611da 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -25,8 +25,10 @@ #include #include #include +#include #include #include +#include #include @@ -62,6 +64,8 @@ #define GPIO93_CAM_RESET (93) #define GPIO41_ETHIRQ (41) #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define GPIO115_WLAN_PWEN (115) +#define GPIO19_WLAN_STRAP (19) static int mmc_cd; static int nand_rb; @@ -159,8 +163,8 @@ static unsigned long common_pin_config[] = { GPIO57_SSP1_TXD, /* SSP2 */ - GPIO19_SSP2_SCLK, - GPIO14_SSP2_SFRM, + GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */ + GPIO14_GPIO, GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, @@ -648,20 +652,86 @@ static struct tdo24m_platform_data em_x270_tdo24m_pdata = { .model = TDO35S, }; +static struct pxa2xx_spi_master em_x270_spi_2_info = { + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct pxa2xx_spi_chip em_x270_libertas_chip = { + .rx_threshold = 1, + .tx_threshold = 1, + .timeout = 1000, +}; + +static unsigned long em_x270_libertas_pin_config[] = { + /* SSP2 */ + GPIO19_SSP2_SCLK, + GPIO14_GPIO, + GPIO89_SSP2_TXD, + GPIO88_SSP2_RXD, +}; + +static int em_x270_libertas_setup(struct spi_device *spi) +{ + int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN"); + if (err) + return err; + + gpio_direction_output(GPIO19_WLAN_STRAP, 1); + mdelay(100); + + pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config)); + + gpio_direction_output(GPIO115_WLAN_PWEN, 0); + mdelay(100); + gpio_set_value(GPIO115_WLAN_PWEN, 1); + mdelay(100); + + spi->bits_per_word = 16; + spi_setup(spi); + + return 0; +} + +static int em_x270_libertas_teardown(struct spi_device *spi) +{ + gpio_set_value(GPIO115_WLAN_PWEN, 0); + gpio_free(GPIO115_WLAN_PWEN); + + return 0; +} + +struct libertas_spi_platform_data em_x270_libertas_pdata = { + .use_dummy_writes = 1, + .gpio_cs = 14, + .setup = em_x270_libertas_setup, + .teardown = em_x270_libertas_teardown, +}; + static struct spi_board_info em_x270_spi_devices[] __initdata = { { - .modalias = "tdo24m", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .controller_data = &em_x270_tdo24m_chip, - .platform_data = &em_x270_tdo24m_pdata, + .modalias = "tdo24m", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .controller_data = &em_x270_tdo24m_chip, + .platform_data = &em_x270_tdo24m_pdata, + }, + { + .modalias = "libertas_spi", + .max_speed_hz = 13000000, + .bus_num = 2, + .irq = IRQ_GPIO(116), + .chip_select = 0, + .controller_data = &em_x270_libertas_chip, + .platform_data = &em_x270_libertas_pdata, }, }; static void __init em_x270_init_spi(void) { pxa2xx_set_spi_info(1, &em_x270_spi_info); + pxa2xx_set_spi_info(2, &em_x270_spi_2_info); spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); } #else -- cgit v0.10.2 From 54088bf50f31e5f20e005922dae8948f9f856b79 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 24 Mar 2009 00:29:29 +0100 Subject: [ARM] pxa: Palm Tungsten E2 basic support This contains support for keypad, MMC, AC97, LCD and backlight. Signed-off-by: Marek Vasut Signed-off-by: Eric Miao diff --git a/MAINTAINERS b/MAINTAINERS index 6fe6f39..97d75ff 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -636,7 +636,7 @@ P: Dirk Opfer M: dirk@opfer-online.de S: Maintained -ARM/PALMTX,PALMT5,PALMLD SUPPORT +ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT P: Marek Vasut M: marek.vasut@gmail.com W: http://hackndev.com diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 96a2006..3e66d90 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -343,6 +343,15 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALMTE2 + bool "Palm Tungsten|E2" + default y + depends on ARCH_PXA_PALM + select PXA25x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|E2 + handheld computer. + config MACH_PALMT5 bool "Palm Tungsten|T5" default y diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c80e1ba..682dbf4 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o +obj-$(CONFIG_MACH_PALMTE2) += palmte2.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o obj-$(CONFIG_MACH_PALMLD) += palmld.o diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h new file mode 100644 index 0000000..808ee7f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -0,0 +1,43 @@ +/* + * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer + * + * Author: + * Carlos Eduardo Medaglia Dyonisio + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMTE2_H_ +#define _INCLUDE_PALMTE2_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMTE2_SD_DETECT_N 10 +#define GPIO_NR_PALMTE2_SD_POWER 55 +#define GPIO_NR_PALMTE2_SD_READONLY 51 + +/* KEYS */ +#define GPIO_NR_PALMTE2_KEY_NOTES 5 +#define GPIO_NR_PALMTE2_KEY_TASKS 7 +#define GPIO_NR_PALMTE2_KEY_CALENDAR 11 +#define GPIO_NR_PALMTE2_KEY_CONTACTS 13 +#define GPIO_NR_PALMTE2_KEY_CENTER 14 +#define GPIO_NR_PALMTE2_KEY_LEFT 19 +#define GPIO_NR_PALMTE2_KEY_RIGHT 20 +#define GPIO_NR_PALMTE2_KEY_DOWN 21 +#define GPIO_NR_PALMTE2_KEY_UP 22 + +/** HERE ARE INIT VALUES **/ + +/* BACKLIGHT */ +#define PALMTE2_MAX_INTENSITY 0xFE +#define PALMTE2_DEFAULT_INTENSITY 0x7E +#define PALMTE2_LIMIT_MASK 0x7F +#define PALMTE2_PRESCALER 0x3F +#define PALMTE2_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c new file mode 100644 index 0000000..e0dc655 --- /dev/null +++ b/arch/arm/mach-pxa/palmte2.c @@ -0,0 +1,278 @@ +/* + * Hardware definitions for Palm Tungsten|E2 + * + * Author: + * Carlos Eduardo Medaglia Dyonisio + * + * Rewrite for mainline: + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmte2_pin_config[] __initdata = { + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + GPIO10_GPIO, /* SD detect */ + GPIO55_GPIO, /* SD power */ + GPIO51_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + + /* GPIO KEYS */ + GPIO5_GPIO, /* notes */ + GPIO7_GPIO, /* tasks */ + GPIO11_GPIO, /* calendar */ + GPIO13_GPIO, /* contacts */ + GPIO14_GPIO, /* center */ + GPIO19_GPIO, /* left */ + GPIO20_GPIO, /* right */ + GPIO21_GPIO, /* down */ + GPIO22_GPIO, /* up */ + + /* MISC */ + GPIO1_RST, /* reset */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmte2_mci_init(struct device *dev, + irq_handler_t palmte2_detect_int, void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), + palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMTE2_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMTE2_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); +err: + return err; +} + +static void palmte2_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMTE2_SD_READONLY); + gpio_free(GPIO_NR_PALMTE2_SD_POWER); + free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); +} + +static void palmte2_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmte2_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY); +} + +static struct pxamci_platform_data palmte2_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmte2_mci_power, + .get_ro = palmte2_mci_get_ro, + .init = palmte2_mci_init, + .exit = palmte2_mci_exit, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmte2_pxa_buttons[] = { + {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" }, + {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" }, + {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" }, + {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" }, + {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" }, + {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" }, + {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" }, + {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" }, + {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" }, +}; + +static struct gpio_keys_platform_data palmte2_pxa_keys_data = { + .buttons = palmte2_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons), +}; + +static struct platform_device palmte2_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmte2_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static struct platform_pwm_backlight_data palmte2_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMTE2_MAX_INTENSITY, + .dft_brightness = PALMTE2_MAX_INTENSITY, + .pwm_period_ns = PALMTE2_PERIOD_NS, +}; + +static struct platform_device palmte2_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa25x_device_pwm0.dev, + .platform_data = &palmte2_backlight_data, + }, +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmte2_lcd_modes[] = { +{ + .pixclock = 77757, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 28, + .right_margin = 7, + .upper_margin = 7, + .lower_margin = 5, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmte2_lcd_screen = { + .modes = palmte2_lcd_modes, + .num_modes = ARRAY_SIZE(palmte2_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmte2_pxa_keys, +#endif + &palmte2_backlight, +}; + +static void __init palmte2_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config)); + + set_pxa_fb_info(&palmte2_lcd_screen); + pxa_set_mci_info(&palmte2_mci_platform_data); + pxa_set_ac97_info(NULL); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMTE2, "Palm Tungsten|E2") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .timer = &pxa_timer, + .init_machine = palmte2_init +MACHINE_END -- cgit v0.10.2 From 8c8aa5fa3060abc17e8a07d15f575485f6a0c0b8 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 24 Mar 2009 21:23:39 +0100 Subject: [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight Signed-off-by: Marek Vasut Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h index 808ee7f..1236134 100644 --- a/arch/arm/mach-pxa/include/mach/palmte2.h +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -16,10 +16,26 @@ /** HERE ARE GPIOs **/ /* GPIOs */ +#define GPIO_NR_PALMTE2_POWER_DETECT 9 +#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4 +#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15 + +/* SD/MMC */ #define GPIO_NR_PALMTE2_SD_DETECT_N 10 #define GPIO_NR_PALMTE2_SD_POWER 55 #define GPIO_NR_PALMTE2_SD_READONLY 51 +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMTE2_IR_DISABLE 48 + +/* USB */ +#define GPIO_NR_PALMTE2_USB_DETECT_N 35 +#define GPIO_NR_PALMTE2_USB_PULLUP 53 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMTE2_BL_POWER 56 +#define GPIO_NR_PALMTE2_LCD_POWER 37 + /* KEYS */ #define GPIO_NR_PALMTE2_KEY_NOTES 5 #define GPIO_NR_PALMTE2_KEY_TASKS 7 @@ -40,4 +56,13 @@ #define PALMTE2_PRESCALER 0x3F #define PALMTE2_PERIOD_NS 3500 +/* BATTERY */ +#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */ + #endif diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index e0dc655..43fcf2e 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -20,8 +20,11 @@ #include #include #include +#include #include #include +#include +#include #include #include @@ -32,6 +35,8 @@ #include #include #include +#include +#include #include "generic.h" #include "devices.h" @@ -56,6 +61,15 @@ static unsigned long palmte2_pin_config[] __initdata = { /* PWM */ GPIO16_PWM0_OUT, + /* USB */ + GPIO15_GPIO, /* usb detect */ + GPIO53_GPIO, /* usb power */ + + /* IrDA */ + GPIO48_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + /* LCD */ GPIO58_LCD_LDD_0, GPIO59_LCD_LDD_1, @@ -76,6 +90,7 @@ static unsigned long palmte2_pin_config[] __initdata = { GPIO74_LCD_FCLK, GPIO75_LCD_LCLK, GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, /* GPIO KEYS */ GPIO5_GPIO, /* notes */ @@ -90,6 +105,10 @@ static unsigned long palmte2_pin_config[] __initdata = { /* MISC */ GPIO1_RST, /* reset */ + GPIO4_GPIO, /* Hotsync button */ + GPIO9_GPIO, /* power detect */ + GPIO37_GPIO, /* LCD power */ + GPIO56_GPIO, /* Backlight power */ }; /****************************************************************************** @@ -205,11 +224,53 @@ static struct platform_device palmte2_pxa_keys = { /****************************************************************************** * Backlight ******************************************************************************/ +static int palmte2_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMTE2_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMTE2_BL_POWER); +err: + return ret; +} + +static int palmte2_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness); + return brightness; +} + +static void palmte2_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_BL_POWER); + gpio_free(GPIO_NR_PALMTE2_LCD_POWER); +} + static struct platform_pwm_backlight_data palmte2_backlight_data = { .pwm_id = 0, .max_brightness = PALMTE2_MAX_INTENSITY, .dft_brightness = PALMTE2_MAX_INTENSITY, .pwm_period_ns = PALMTE2_PERIOD_NS, + .init = palmte2_backlight_init, + .notify = palmte2_backlight_notify, + .exit = palmte2_backlight_exit, }; static struct platform_device palmte2_backlight = { @@ -221,6 +282,119 @@ static struct platform_device palmte2_backlight = { }; /****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmte2_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); +err: + return err; +} + +static void palmte2_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); +} + +static void palmte2_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmte2_ficp_platform_data = { + .startup = palmte2_irda_startup, + .shutdown = palmte2_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmte2_irda_transceiver_mode, +}; + +/****************************************************************************** + * UDC + ******************************************************************************/ +static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = { + .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N, + .gpio_vbus_inverted = 1, + .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP, + .gpio_pullup_inverted = 0, +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT); + if (ret) + goto err2; + + return 0; + +err2: + gpio_free(GPIO_NR_PALMTE2_POWER_DETECT); +err1: + return ret; +} + +static int palmte2_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_POWER_DETECT); +} + +static char *palmte2_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmte2_is_ac_online, + .exit = power_supply_exit, + .supplied_to = palmte2_supplicants, + .num_supplicants = ARRAY_SIZE(palmte2_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMTE2_BAT_MAX_VOLTAGE, + .min_voltage = PALMTE2_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** * Framebuffer ******************************************************************************/ static struct pxafb_mode_info palmte2_lcd_modes[] = { @@ -254,15 +428,29 @@ static struct platform_device *devices[] __initdata = { &palmte2_pxa_keys, #endif &palmte2_backlight, + &power_supply, }; +/* setup udc GPIOs initial state */ +static void __init palmte2_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMTE2_USB_PULLUP); + } +} + static void __init palmte2_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config)); set_pxa_fb_info(&palmte2_lcd_screen); pxa_set_mci_info(&palmte2_mci_platform_data); + palmte2_udc_init(); + pxa_set_udc_info(&palmte2_udc_info); pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmte2_ficp_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } -- cgit v0.10.2 From 81854f82c5c1a203b2f5c94f6aa2ed8b8e19f025 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 28 Mar 2009 12:37:42 +0100 Subject: [ARM] pxa: Add support for suspend on PalmTX, T5 and LD Signed-off-by: Marek Vasut Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 7c295a4..fb13c82 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -87,6 +87,7 @@ #define PALMLD_IDE_SIZE 0x00100000 #define PALMLD_PHYS_IO_START 0x40000000 +#define PALMLD_STR_BASE 0xa0200000 /* BATTERY */ #define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 94db288..052bfe7 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -59,6 +59,7 @@ /* Various addresses */ #define PALMT5_PHYS_RAM_START 0xa0000000 #define PALMT5_PHYS_IO_START 0x40000000 +#define PALMT5_STR_BASE 0xa0200000 /* TOUCHSCREEN */ #define AC97_LINK_FRAME 21 diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1e8bccb..9f7d62f 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -78,6 +78,8 @@ #define PALMTX_PHYS_RAM_START 0xa0000000 #define PALMTX_PHYS_IO_START 0x40000000 +#define PALMTX_STR_BASE 0xa0200000 + #define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ #define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 8587477..ecf5910 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -68,10 +69,10 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO47_FICP_TXD, /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -507,6 +508,33 @@ static struct pxafb_mach_info palmld_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmld_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMLD_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmld_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 9521c7b..0680f1a 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -75,10 +75,10 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO95_GPIO, /* usb power */ /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -450,6 +450,33 @@ static struct pxafb_mach_info palmt5_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmt5_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMT5_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmt5_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index b490c09..59d0c1c 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -93,10 +93,10 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO116_GPIO, /* wifi ready */ /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -459,6 +459,33 @@ static struct pxafb_mach_info palmtx_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmtx_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMTX_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmtx_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b438fc4..e6344ec 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -828,6 +828,17 @@ void __init reserve_node_zero(pg_data_t *pgdat) BOOTMEM_DEFAULT); } + if (machine_is_palmld() || machine_is_palmtx()) { + reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, + BOOTMEM_EXCLUSIVE); + reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, + BOOTMEM_EXCLUSIVE); + } + + if (machine_is_palmt5()) + reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, + BOOTMEM_EXCLUSIVE); + #ifdef CONFIG_SA1111 /* * Because of the SA1111 DMA bug, we want to preserve our -- cgit v0.10.2 From 50f6bb0ab75794ad02cb5db503cc8c99465ceaf4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 1 Apr 2009 22:30:07 +0800 Subject: [ARM] pxa/cm-x2xx: fix ucb1400 not being registered This patch fixes cm-x2xx not registering the ucb1400. This is because of the splitting of ucb1400 driver half year ago. Signed-off-by: Marek Vasut Acked-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 117b5435f..b50ef39 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -121,7 +121,7 @@ static inline void cmx2xx_init_dm9000(void) {} /* UCB1400 touchscreen controller */ #if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) static struct platform_device cmx2xx_ts_device = { - .name = "ucb1400_ts", + .name = "ucb1400_core", .id = -1, }; -- cgit v0.10.2 From 22a0200b18b8526043d3014efdaf839b01767111 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 2 Apr 2009 08:33:14 +0200 Subject: [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL In 67fca028f1535e510689d2e444b0289e264e05c1, the ax88796 ethernet driver learned a way to let the platform data hand in the MAC address. Use it here as the original Colibri bootloader passes in a MAC address via ATAG_SERIAL. Reported-by: Matthias Meier Signed-off-by: Daniel Mack Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 10c2eaf..0964eda 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -32,12 +32,13 @@ #if defined(CONFIG_AX88796) #define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO) + /* * Asix AX88796 Ethernet */ static struct ax_plat_data colibri_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2 + .flags = 0, /* defined later */ + .wordlength = 2, }; static struct resource colibri_asix_resource[] = { @@ -70,6 +71,7 @@ static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = { static void __init colibri_pxa300_init_eth(void) { + colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config)); set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 55b74a7..8a742b7 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -38,8 +38,8 @@ * Asix AX88796 Ethernet */ static struct ax_plat_data colibri_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2 + .flags = 0, /* defined later */ + .wordlength = 2, }; static struct resource colibri_asix_resource[] = { @@ -72,6 +72,7 @@ static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = { static void __init colibri_pxa320_init_eth(void) { + colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config)); set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 12d0afc..ea34e34 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -28,6 +29,40 @@ #include "generic.h" #include "devices.h" +#if defined(CONFIG_AX88796) +#define ETHER_ADDR_LEN 6 +static u8 ether_mac_addr[ETHER_ADDR_LEN]; + +void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data) +{ + int i; + u64 serial = ((u64) system_serial_high << 32) | system_serial_low; + + /* + * If the bootloader passed in a serial boot tag, which contains a + * valid ethernet MAC, pass it to the interface. Toradex ships the + * modules with their own bootloader which provides a valid MAC + * this way. + */ + + for (i = 0; i < ETHER_ADDR_LEN; i++) { + ether_mac_addr[i] = serial & 0xff; + serial >>= 8; + } + + if (is_valid_ether_addr(ether_mac_addr)) { + plat_data->flags |= AXFLG_MAC_FROMPLATFORM; + plat_data->mac_addr = ether_mac_addr; + printk(KERN_INFO "%s(): taking MAC from serial boot tag\n", + __func__); + } else { + plat_data->flags |= AXFLG_MAC_FROMDEV; + printk(KERN_INFO "%s(): no valid serial boot tag found, " + "taking MAC from device\n", __func__); + } +} +#endif + #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static int mmc_detect_pin; diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 3f2a01d..306ad64 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -16,6 +16,10 @@ extern void colibri_pxa3xx_init_lcd(int bl_pin); static inline void colibri_pxa3xx_init_lcd(int) {} #endif +#if defined(CONFIG_AX88796) +extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data); +#endif + /* physical memory regions */ #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ -- cgit v0.10.2 From 8a28b10e915fff4a4e8be4f152a8e8695d0cb044 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 2 Apr 2009 08:33:15 +0200 Subject: [ARM] pxa/colibri: get rid of set_irq_type() In commit 47cb035560a41bd1bd3db506eeab93088815203e, the ax88796 driver learned to take IRQ flags from platform_device definition. Use that here to get rid of the set_irq_type() hack. Signed-off-by: Daniel Mack Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 0964eda..7c9c34c 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include @@ -50,7 +50,7 @@ static struct resource colibri_asix_resource[] = { [1] = { .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -73,7 +73,6 @@ static void __init colibri_pxa300_init_eth(void) { colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config)); - set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 8a742b7..a18d37b 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include @@ -51,7 +51,7 @@ static struct resource colibri_asix_resource[] = { [1] = { .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -74,7 +74,6 @@ static void __init colibri_pxa320_init_eth(void) { colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config)); - set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); } #else diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 306ad64..90230c6 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -1,5 +1,8 @@ #ifndef _COLIBRI_H_ #define _COLIBRI_H_ + +#include + /* * common settings for all modules */ -- cgit v0.10.2 From 675b5d869fe8f6f9cdb3c6758228f211fb1773e6 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 1 Apr 2009 03:40:05 +0400 Subject: [ARM] pxa/csb701: do not register devices on non-csb726 boads csb701 driver can currently only be used on csb726 boards, limit the csb701 devices registration to csb726 board. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c index 4a2a295..5a221a4 100644 --- a/arch/arm/mach-pxa/csb701.c +++ b/arch/arm/mach-pxa/csb701.c @@ -5,6 +5,8 @@ #include #include +#include + static struct gpio_keys_button csb701_buttons[] = { { .code = 0x7, @@ -54,6 +56,9 @@ static struct platform_device *devices[] __initdata = { static int __init csb701_init(void) { + if (!machine_is_csb726()) + return -ENODEV; + return platform_add_devices(devices, ARRAY_SIZE(devices)); } -- cgit v0.10.2 From 80748fb8ff3bc068dccacb690cd2eb417b034ec7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 3 Apr 2009 12:45:49 +0100 Subject: [ARM] pxa: register AC97 controller devices The tosa, e740, e750, e800 and mioa701 all use AC97 audio codecs but does not register the platform device for the AC97 controller. Doing so is now required by ASoC. Signed-off-by: Mark Brown Acked-by: Dmitry Eremin-Solenikov Acked-by: Ian Molton Signed-off-by: Robert Jarzmik Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 07500a0..a36fc17 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -29,6 +29,7 @@ #include #include #include +#include #include "generic.h" #include "eseries.h" @@ -197,6 +198,7 @@ static void __init e740_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); e7xx_irda_init(); pxa_set_ficp_info(&e7xx_ficp_platform_data); } diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index 6126c04..1d00110 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "generic.h" #include "eseries.h" @@ -198,6 +199,7 @@ static void __init e750_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); e7xx_irda_init(); pxa_set_ficp_info(&e7xx_ficp_platform_data); } diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c index 74ab098..9866c7b 100644 --- a/arch/arm/mach-pxa/e800.c +++ b/arch/arm/mach-pxa/e800.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "generic.h" #include "eseries.h" @@ -199,6 +200,7 @@ static void __init e800_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e800_udc_mach_info); + pxa_set_ac97_info(NULL); } MACHINE_START(E800, "Toshiba e800") diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 97c93a7..9203b06 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -50,6 +50,7 @@ #include #include #include +#include #include #include @@ -763,8 +764,6 @@ MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev, &mioa701_backlight_data); MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) -MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL) -MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); @@ -774,8 +773,6 @@ static struct platform_device *devices[] __initdata = { &mioa701_backlight, &mioa701_led, &pxa2xx_pcm, - &pxa2xx_ac97, - &mio_wm9713_codec, &mioa701_sound, &power_dev, &strataflash, @@ -818,6 +815,7 @@ static void __init mioa701_machine_init(void) pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); pxa_set_udc_info(&mioa701_udc_info); + pxa_set_ac97_info(NULL); pm_power_off = mioa701_poweroff; arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 6e8ade6..afac5b6 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -914,6 +915,7 @@ static void __init tosa_init(void) pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); + pxa_set_ac97_info(NULL); platform_scoop_config = &tosa_pcmcia_config; pxa2xx_set_spi_info(2, &pxa_ssp_master_info); -- cgit v0.10.2 From f73953c0656f2db9073c585c4df2884a8ecd101e Mon Sep 17 00:00:00 2001 From: Thiemo Nagel Date: Tue, 7 Apr 2009 18:46:47 -0400 Subject: ext4: Fix big-endian problem in __ext4_check_blockref() Commit fe2c8191 introduced a regression on big-endian system, because the checks to make sure block references in non-extent inodes are valid failed to use le32_to_cpu(). Reported-by: Alexander Beregalov Signed-off-by: Thiemo Nagel Tested-by: Alexander Beregalov Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a2e7952..c6bd6ce 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -372,16 +372,16 @@ static int ext4_block_to_path(struct inode *inode, } static int __ext4_check_blockref(const char *function, struct inode *inode, - unsigned int *p, unsigned int max) { + __le32 *p, unsigned int max) { unsigned int maxblocks = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es); - unsigned int *bref = p; + __le32 *bref = p; while (bref < p+max) { - if (unlikely(*bref >= maxblocks)) { + if (unlikely(le32_to_cpu(*bref) >= maxblocks)) { ext4_error(inode->i_sb, function, "block reference %u >= max (%u) " "in inode #%lu, offset=%d", - *bref, maxblocks, + le32_to_cpu(*bref), maxblocks, inode->i_ino, (int)(bref-p)); return -EIO; } -- cgit v0.10.2 From e44543b83bf4ab84dc6bd5b88158c78b1ed1c208 Mon Sep 17 00:00:00 2001 From: Thiemo Nagel Date: Sat, 4 Apr 2009 23:30:44 -0400 Subject: ext4: Fix off-by-one-error in ext4_valid_extent_idx() Signed-off-by: Thiemo Nagel Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index ac77d8b..6132353 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -342,7 +342,7 @@ static int ext4_valid_extent_idx(struct inode *inode, ext4_fsblk_t block = idx_pblock(ext_idx); struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es; if (unlikely(block < le32_to_cpu(es->s_first_data_block) || - (block > ext4_blocks_count(es)))) + (block >= ext4_blocks_count(es)))) return 0; else return 1; -- cgit v0.10.2 From 453ed90d1395a5281a8f1a0de5d8aabc66202e34 Mon Sep 17 00:00:00 2001 From: Latchesar Ionkov Date: Sun, 5 Apr 2009 16:22:16 -0500 Subject: net/9p: set correct stat size when sending Twstat messages The 9P2000 Twstat message requires the size of the stat structure to be specified. Currently the 9p code writes zero instead of the actual size. This behavior confuses some of the file servers that check if the size is correct. This patch adds a new function that calculcates the stat size and puts the value in the appropriate place in the 9P message. Signed-off-by: Latchesar Ionkov Reviewed-by: Eric Van Hensbergen diff --git a/net/9p/client.c b/net/9p/client.c index 1eb580c..93f442a 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -1251,12 +1251,42 @@ error: } EXPORT_SYMBOL(p9_client_stat); +static int p9_client_statsize(struct p9_wstat *wst, int optional) +{ + int ret; + + /* size[2] type[2] dev[4] qid[13] */ + /* mode[4] atime[4] mtime[4] length[8]*/ + /* name[s] uid[s] gid[s] muid[s] */ + ret = 2+2+4+13+4+4+4+8+2+2+2+2; + + if (wst->name) + ret += strlen(wst->name); + if (wst->uid) + ret += strlen(wst->uid); + if (wst->gid) + ret += strlen(wst->gid); + if (wst->muid) + ret += strlen(wst->muid); + + if (optional) { + ret += 2+4+4+4; /* extension[s] n_uid[4] n_gid[4] n_muid[4] */ + if (wst->extension) + ret += strlen(wst->extension); + } + + return ret; +} + int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst) { int err; struct p9_req_t *req; struct p9_client *clnt; + err = 0; + clnt = fid->clnt; + wst->size = p9_client_statsize(wst, clnt->dotu); P9_DPRINTK(P9_DEBUG_9P, ">>> TWSTAT fid %d\n", fid->fid); P9_DPRINTK(P9_DEBUG_9P, " sz=%x type=%x dev=%x qid=%x.%llx.%x\n" @@ -1268,10 +1298,8 @@ int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst) wst->atime, wst->mtime, (unsigned long long)wst->length, wst->name, wst->uid, wst->gid, wst->muid, wst->extension, wst->n_uid, wst->n_gid, wst->n_muid); - err = 0; - clnt = fid->clnt; - req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, 0, wst); + req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst); if (IS_ERR(req)) { err = PTR_ERR(req); goto error; -- cgit v0.10.2 From 742b11a7ec60faa25d76c95c268041ab215c25ad Mon Sep 17 00:00:00 2001 From: Latchesar Ionkov Date: Sun, 5 Apr 2009 16:26:41 -0500 Subject: net/9p: return error when p9_client_stat fails p9_client_stat function doesn't return correct value if it fails. p9_client_stat should return ERR_PTR of the error value when it fails. Instead, it always returns a value to the allocated p9_wstat struct even when it is not populated correctly. This patch makes p9_client_stat to handle failure correctly. Signed-off-by: Latchesar Ionkov Reviewed-by: Eric Van Hensbergen diff --git a/net/9p/client.c b/net/9p/client.c index 93f442a..781d89a 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -1244,10 +1244,14 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid) ret->name, ret->uid, ret->gid, ret->muid, ret->extension, ret->n_uid, ret->n_gid, ret->n_muid); + p9_free_req(clnt, req); + return ret; + free_and_error: p9_free_req(clnt, req); error: - return ret; + kfree(ret); + return ERR_PTR(err); } EXPORT_SYMBOL(p9_client_stat); -- cgit v0.10.2 From 1bab88b2310998de18b32529a27ea835d164254a Mon Sep 17 00:00:00 2001 From: Latchesar Ionkov Date: Sun, 5 Apr 2009 16:28:59 -0500 Subject: net/9p: handle correctly interrupted 9P requests Currently the 9p code crashes when a operation is interrupted, i.e. for example when the user presses ^C while reading from a file. This patch fixes the code that is responsible for interruption and flushing of 9P operations. Signed-off-by: Latchesar Ionkov diff --git a/include/net/9p/client.h b/include/net/9p/client.h index 4012e07..e268122 100644 --- a/include/net/9p/client.h +++ b/include/net/9p/client.h @@ -98,7 +98,6 @@ enum p9_req_status_t { struct p9_req_t { int status; int t_err; - u16 flush_tag; wait_queue_head_t *wq; struct p9_fcall *tc; struct p9_fcall *rc; diff --git a/net/9p/client.c b/net/9p/client.c index 781d89a..dd43a82 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -203,7 +203,6 @@ static struct p9_req_t *p9_tag_alloc(struct p9_client *c, u16 tag) p9pdu_reset(req->tc); p9pdu_reset(req->rc); - req->flush_tag = 0; req->tc->tag = tag-1; req->status = REQ_STATUS_ALLOC; @@ -324,35 +323,9 @@ static void p9_free_req(struct p9_client *c, struct p9_req_t *r) */ void p9_client_cb(struct p9_client *c, struct p9_req_t *req) { - struct p9_req_t *other_req; - unsigned long flags; - P9_DPRINTK(P9_DEBUG_MUX, " tag %d\n", req->tc->tag); - - if (req->status == REQ_STATUS_ERROR) - wake_up(req->wq); - - if (req->flush_tag) { /* flush receive path */ - P9_DPRINTK(P9_DEBUG_9P, "<<< RFLUSH %d\n", req->tc->tag); - spin_lock_irqsave(&c->lock, flags); - other_req = p9_tag_lookup(c, req->flush_tag); - if (other_req->status != REQ_STATUS_FLSH) /* stale flush */ - spin_unlock_irqrestore(&c->lock, flags); - else { - other_req->status = REQ_STATUS_FLSHD; - spin_unlock_irqrestore(&c->lock, flags); - wake_up(other_req->wq); - } - p9_free_req(c, req); - } else { /* normal receive path */ - P9_DPRINTK(P9_DEBUG_MUX, "normal: tag %d\n", req->tc->tag); - spin_lock_irqsave(&c->lock, flags); - if (req->status != REQ_STATUS_FLSHD) - req->status = REQ_STATUS_RCVD; - spin_unlock_irqrestore(&c->lock, flags); - wake_up(req->wq); - P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag); - } + wake_up(req->wq); + P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag); } EXPORT_SYMBOL(p9_client_cb); @@ -486,9 +459,15 @@ static int p9_client_flush(struct p9_client *c, struct p9_req_t *oldreq) if (IS_ERR(req)) return PTR_ERR(req); - req->flush_tag = oldtag; - /* we don't free anything here because RPC isn't complete */ + /* if we haven't received a response for oldreq, + remove it from the list. */ + spin_lock(&c->lock); + if (oldreq->status == REQ_STATUS_FLSH) + list_del(&oldreq->req_list); + spin_unlock(&c->lock); + + p9_free_req(c, req); return 0; } @@ -509,7 +488,6 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) struct p9_req_t *req; unsigned long flags; int sigpending; - int flushed = 0; P9_DPRINTK(P9_DEBUG_MUX, "client %p op %d\n", c, type); @@ -546,42 +524,28 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) goto reterr; } - /* if it was a flush we just transmitted, return our tag */ - if (type == P9_TFLUSH) - return req; -again: P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d\n", req->wq, tag); err = wait_event_interruptible(*req->wq, req->status >= REQ_STATUS_RCVD); - P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d (flushed=%d)\n", - req->wq, tag, err, flushed); + P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d\n", + req->wq, tag, err); if (req->status == REQ_STATUS_ERROR) { P9_DPRINTK(P9_DEBUG_ERROR, "req_status error %d\n", req->t_err); err = req->t_err; - } else if (err == -ERESTARTSYS && flushed) { - P9_DPRINTK(P9_DEBUG_MUX, "flushed - going again\n"); - goto again; - } else if (req->status == REQ_STATUS_FLSHD) { - P9_DPRINTK(P9_DEBUG_MUX, "flushed - erestartsys\n"); - err = -ERESTARTSYS; } - if ((err == -ERESTARTSYS) && (c->status == Connected) && (!flushed)) { + if ((err == -ERESTARTSYS) && (c->status == Connected)) { P9_DPRINTK(P9_DEBUG_MUX, "flushing\n"); - spin_lock_irqsave(&c->lock, flags); - if (req->status == REQ_STATUS_SENT) - req->status = REQ_STATUS_FLSH; - spin_unlock_irqrestore(&c->lock, flags); sigpending = 1; - flushed = 1; clear_thread_flag(TIF_SIGPENDING); - if (c->trans_mod->cancel(c, req)) { - err = p9_client_flush(c, req); - if (err == 0) - goto again; - } + if (c->trans_mod->cancel(c, req)) + p9_client_flush(c, req); + + /* if we received the response anyway, don't signal error */ + if (req->status == REQ_STATUS_RCVD) + err = 0; } if (sigpending) { diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index c613ed08..a2a1814 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -213,8 +213,8 @@ static void p9_conn_cancel(struct p9_conn *m, int err) spin_unlock_irqrestore(&m->client->lock, flags); list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) { - list_del(&req->req_list); P9_DPRINTK(P9_DEBUG_ERROR, "call back req %p\n", req); + list_del(&req->req_list); p9_client_cb(m->client, req); } } @@ -336,7 +336,8 @@ static void p9_read_work(struct work_struct *work) "mux %p pkt: size: %d bytes tag: %d\n", m, n, tag); m->req = p9_tag_lookup(m->client, tag); - if (!m->req) { + if (!m->req || (m->req->status != REQ_STATUS_SENT && + m->req->status != REQ_STATUS_FLSH)) { P9_DPRINTK(P9_DEBUG_ERROR, "Unexpected packet tag %d\n", tag); err = -EIO; @@ -361,10 +362,11 @@ static void p9_read_work(struct work_struct *work) if ((m->req) && (m->rpos == m->rsize)) { /* packet is read in */ P9_DPRINTK(P9_DEBUG_TRANS, "got new packet\n"); spin_lock(&m->client->lock); + if (m->req->status != REQ_STATUS_ERROR) + m->req->status = REQ_STATUS_RCVD; list_del(&m->req->req_list); spin_unlock(&m->client->lock); p9_client_cb(m->client, m->req); - m->rbuf = NULL; m->rpos = 0; m->rsize = 0; @@ -454,6 +456,7 @@ static void p9_write_work(struct work_struct *work) req = list_entry(m->unsent_req_list.next, struct p9_req_t, req_list); req->status = REQ_STATUS_SENT; + P9_DPRINTK(P9_DEBUG_TRANS, "move req %p\n", req); list_move_tail(&req->req_list, &m->req_list); m->wbuf = req->tc->sdata; @@ -683,12 +686,13 @@ static int p9_fd_cancel(struct p9_client *client, struct p9_req_t *req) P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req); spin_lock(&client->lock); - list_del(&req->req_list); if (req->status == REQ_STATUS_UNSENT) { + list_del(&req->req_list); req->status = REQ_STATUS_FLSHD; ret = 0; - } + } else if (req->status == REQ_STATUS_SENT) + req->status = REQ_STATUS_FLSH; spin_unlock(&client->lock); diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c index 7fa0eb2..ac49900 100644 --- a/net/9p/trans_rdma.c +++ b/net/9p/trans_rdma.c @@ -295,6 +295,7 @@ handle_recv(struct p9_client *client, struct p9_trans_rdma *rdma, goto err_out; req->rc = c->rc; + req->status = REQ_STATUS_RCVD; p9_client_cb(client, req); return; diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 2d7781e..bb8579a 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -134,6 +134,7 @@ static void req_done(struct virtqueue *vq) P9_DPRINTK(P9_DEBUG_TRANS, ": rc %p\n", rc); P9_DPRINTK(P9_DEBUG_TRANS, ": lookup tag %d\n", rc->tag); req = p9_tag_lookup(chan->client, rc->tag); + req->status = REQ_STATUS_RCVD; p9_client_cb(chan->client, req); } } -- cgit v0.10.2 From 3ef48fac6e8e2362a4e6ef31dd043c89fe107875 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Apr 2009 12:27:24 +0100 Subject: [ARM] omap: fix omap1 clock usecount decrement bug Same fix as per a7f8c59, but for OMAP1 instead. Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index dafe4f7..336e51d 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -590,27 +590,28 @@ static void omap1_init_ext_clk(struct clk * clk) static int omap1_clk_enable(struct clk *clk) { int ret = 0; + if (clk->usecount++ == 0) { - if (likely(clk->parent)) { + if (clk->parent) { ret = omap1_clk_enable(clk->parent); - - if (unlikely(ret != 0)) { - clk->usecount--; - return ret; - } + if (ret) + goto err; if (clk->flags & CLOCK_NO_IDLE_PARENT) omap1_clk_deny_idle(clk->parent); } ret = clk->ops->enable(clk); - - if (unlikely(ret != 0) && clk->parent) { - omap1_clk_disable(clk->parent); - clk->usecount--; + if (ret) { + if (clk->parent) + omap1_clk_disable(clk->parent); + goto err; } } + return ret; +err: + clk->usecount--; return ret; } -- cgit v0.10.2 From 49a88d18a1721ac14dbc67cd390db18ee1f3a42f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 6 Apr 2009 17:06:55 +0200 Subject: netfilter: ip6tables regression fix Commit 7845447 (netfilter: iptables: lock free counters) broke ip6_tables by unconditionally returning ENOMEM in alloc_counters(), Reported-by: Graham Murray Signed-off-by: Eric Dumazet Signed-off-by: Patrick McHardy diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index dfed176..800ae85 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -1033,6 +1033,8 @@ static struct xt_counters *alloc_counters(struct xt_table *table) xt_free_table_info(info); + return counters; + free_counters: vfree(counters); nomem: -- cgit v0.10.2 From 3ae16f13027c26cb4c227392116c2027524a6444 Mon Sep 17 00:00:00 2001 From: Alex Riesen Date: Mon, 6 Apr 2009 17:09:43 +0200 Subject: netfilter: fix selection of "LED" target in netfilter It's plural, not LED_TRIGGERS. Signed-off-by: Alex Riesen Signed-off-by: Patrick McHardy diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index bb279bf..2329c5f 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -374,7 +374,7 @@ config NETFILTER_XT_TARGET_HL config NETFILTER_XT_TARGET_LED tristate '"LED" target support' - depends on LEDS_CLASS && LED_TRIGGERS + depends on LEDS_CLASS && LEDS_TRIGGERS depends on NETFILTER_ADVANCED help This option adds a `LED' target, which allows you to blink LEDs in -- cgit v0.10.2 From 83731671d9e6878c0a05d309c68fb71c16d3235a Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 6 Apr 2009 17:47:20 +0200 Subject: netfilter: ctnetlink: fix regression in expectation handling This patch fixes a regression (introduced by myself in commit 19abb7b: netfilter: ctnetlink: deliver events for conntracks changed from userspace) that results in an expectation re-insertion since __nf_ct_expect_check() may return 0 for expectation timer refreshing. This patch also removes a unnecessary refcount bump that pretended to avoid a possible race condition with event delivery and expectation timers (as said, not needed since we hold a reference to the object since until we finish the expectation setup). This also merges nf_ct_expect_related_report() and nf_ct_expect_related() which look basically the same. Reported-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy diff --git a/include/net/netfilter/nf_conntrack_expect.h b/include/net/netfilter/nf_conntrack_expect.h index ab17a15..a965280 100644 --- a/include/net/netfilter/nf_conntrack_expect.h +++ b/include/net/netfilter/nf_conntrack_expect.h @@ -99,9 +99,12 @@ void nf_ct_expect_init(struct nf_conntrack_expect *, unsigned int, u_int8_t, const union nf_inet_addr *, u_int8_t, const __be16 *, const __be16 *); void nf_ct_expect_put(struct nf_conntrack_expect *exp); -int nf_ct_expect_related(struct nf_conntrack_expect *expect); int nf_ct_expect_related_report(struct nf_conntrack_expect *expect, u32 pid, int report); +static inline int nf_ct_expect_related(struct nf_conntrack_expect *expect) +{ + return nf_ct_expect_related_report(expect, 0, 0); +} #endif /*_NF_CONNTRACK_EXPECT_H*/ diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index 3940f99..afde8f9 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -372,7 +372,7 @@ static inline int __nf_ct_expect_check(struct nf_conntrack_expect *expect) struct net *net = nf_ct_exp_net(expect); struct hlist_node *n; unsigned int h; - int ret = 0; + int ret = 1; if (!master_help->helper) { ret = -ESHUTDOWN; @@ -412,41 +412,23 @@ out: return ret; } -int nf_ct_expect_related(struct nf_conntrack_expect *expect) +int nf_ct_expect_related_report(struct nf_conntrack_expect *expect, + u32 pid, int report) { int ret; spin_lock_bh(&nf_conntrack_lock); ret = __nf_ct_expect_check(expect); - if (ret < 0) + if (ret <= 0) goto out; + ret = 0; nf_ct_expect_insert(expect); - atomic_inc(&expect->use); - spin_unlock_bh(&nf_conntrack_lock); - nf_ct_expect_event(IPEXP_NEW, expect); - nf_ct_expect_put(expect); - return ret; -out: spin_unlock_bh(&nf_conntrack_lock); + nf_ct_expect_event_report(IPEXP_NEW, expect, pid, report); return ret; -} -EXPORT_SYMBOL_GPL(nf_ct_expect_related); - -int nf_ct_expect_related_report(struct nf_conntrack_expect *expect, - u32 pid, int report) -{ - int ret; - - spin_lock_bh(&nf_conntrack_lock); - ret = __nf_ct_expect_check(expect); - if (ret < 0) - goto out; - nf_ct_expect_insert(expect); out: spin_unlock_bh(&nf_conntrack_lock); - if (ret == 0) - nf_ct_expect_event_report(IPEXP_NEW, expect, pid, report); return ret; } EXPORT_SYMBOL_GPL(nf_ct_expect_related_report); -- cgit v0.10.2 From 7fd87b3f1a6955da0a21b4fd99f8939701055172 Mon Sep 17 00:00:00 2001 From: Francesco VIRLINZI Date: Mon, 6 Apr 2009 07:17:04 +0000 Subject: sh: intc: Added resume from hibernation support to the intc It's required for all modules loaded in the previous runtime session because not initilized duing the kernel start-up. Signed-off-by: Francesco Virlinzi Signed-off-by: Paul Mundt diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index 7fb9b5c..12d13d9 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -44,6 +44,7 @@ struct intc_handle_int { struct intc_desc_int { struct list_head list; struct sys_device sysdev; + pm_message_t state; unsigned long *reg; #ifdef CONFIG_SMP unsigned long *smp; @@ -786,18 +787,44 @@ static int intc_suspend(struct sys_device *dev, pm_message_t state) /* get intc controller associated with this sysdev */ d = container_of(dev, struct intc_desc_int, sysdev); - /* enable wakeup irqs belonging to this intc controller */ - for_each_irq_desc(irq, desc) { - if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip)) - intc_enable(irq); + switch (state.event) { + case PM_EVENT_ON: + if (d->state.event != PM_EVENT_FREEZE) + break; + for_each_irq_desc(irq, desc) { + if (desc->chip != &d->chip) + continue; + if (desc->status & IRQ_DISABLED) + intc_disable(irq); + else + intc_enable(irq); + } + break; + case PM_EVENT_FREEZE: + /* nothing has to be done */ + break; + case PM_EVENT_SUSPEND: + /* enable wakeup irqs belonging to this intc controller */ + for_each_irq_desc(irq, desc) { + if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip)) + intc_enable(irq); + } + break; } + d->state = state; return 0; } +static int intc_resume(struct sys_device *dev) +{ + return intc_suspend(dev, PMSG_ON); +} + static struct sysdev_class intc_sysdev_class = { .name = "intc", .suspend = intc_suspend, + .resume = intc_resume, }; /* register this intc as sysdev to allow suspend/resume */ -- cgit v0.10.2 From 9bb019f4c25a426deab26c9d1c67c8914bb4424f Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 6 Apr 2009 11:37:15 +0000 Subject: sh: sh7785lcr: fix PCI address map for 32-bit mode Fix the problem that cannot work PCI device on 32-bit mode because influence of the commit 68b42d1b548be1840aff7122fdebeb804daf0fa3 ("sh: sh7785lcr: Map whole PCI address space."). So this patch was implement like a 29-bit mode, map whole physical address space of DDR-SDRAM. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index e8b7446..fb0869f 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -48,8 +48,13 @@ EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7785_pci_map = { .window0 = { +#if defined(CONFIG_32BIT) + .base = SH7780_32BIT_DDR_BASE_ADDR, + .size = 0x40000000, +#else .base = SH7780_CS0_BASE_ADDR, .size = 0x20000000, +#endif }, .flags = SH4_PCIC_NO_RESET, diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 97b2c98..93adc71 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -104,6 +104,8 @@ #define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE) #define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE) +#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000 + struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7780.c */ -- cgit v0.10.2 From 090fed50ca11e7fe36e69d8cd46069276a40134b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 6 Apr 2009 09:00:16 -0700 Subject: sh: wire up sys_preadv/sys_pwritev() syscalls. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h index d52c000..2efb819 100644 --- a/arch/sh/include/asm/unistd_32.h +++ b/arch/sh/include/asm/unistd_32.h @@ -341,8 +341,10 @@ #define __NR_dup3 330 #define __NR_pipe2 331 #define __NR_inotify_init1 332 +#define __NR_preadv 333 +#define __NR_pwritev 334 -#define NR_syscalls 333 +#define NR_syscalls 335 #ifdef __KERNEL__ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h index 7c54e91..6eb9d29 100644 --- a/arch/sh/include/asm/unistd_64.h +++ b/arch/sh/include/asm/unistd_64.h @@ -381,10 +381,12 @@ #define __NR_dup3 358 #define __NR_pipe2 359 #define __NR_inotify_init1 360 +#define __NR_preadv 361 +#define __NR_pwritev 362 #ifdef __KERNEL__ -#define NR_syscalls 361 +#define NR_syscalls 363 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index e67c173..05202ed 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -349,3 +349,5 @@ ENTRY(sys_call_table) .long sys_dup3 /* 330 */ .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_writev diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index 557cb91..a083609 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -387,3 +387,5 @@ sys_call_table: .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 /* 360 */ + .long sys_preadv + .long sys_pwritev -- cgit v0.10.2 From a6cb767e24b1dbedfcfa8077eab0aa2eab224038 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 6 Apr 2009 18:39:27 +0200 Subject: xfs: validate log feature fields correctly If the large log sector size feature bit is set in the superblock by accident (say disk corruption), the then fields that are now considered valid are not checked on production kernels. The checks are present as ASSERT statements so cause a panic on a debug kernel. Change this so that the fields are validity checked if the feature bit is set and abort the log mount if the fields do not contain valid values. Reported-by: Eric Sesterhenn Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index f76c6d7..8016d30 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -562,9 +562,8 @@ xfs_log_mount( } mp->m_log = xlog_alloc_log(mp, log_target, blk_offset, num_bblks); - if (!mp->m_log) { - cmn_err(CE_WARN, "XFS: Log allocation failed: No memory!"); - error = ENOMEM; + if (IS_ERR(mp->m_log)) { + error = -PTR_ERR(mp->m_log); goto out; } @@ -1180,10 +1179,13 @@ xlog_alloc_log(xfs_mount_t *mp, xfs_buf_t *bp; int i; int iclogsize; + int error = ENOMEM; log = kmem_zalloc(sizeof(xlog_t), KM_MAYFAIL); - if (!log) - return NULL; + if (!log) { + xlog_warn("XFS: Log allocation failed: No memory!"); + goto out; + } log->l_mp = mp; log->l_targ = log_target; @@ -1201,19 +1203,35 @@ xlog_alloc_log(xfs_mount_t *mp, log->l_grant_reserve_cycle = 1; log->l_grant_write_cycle = 1; + error = EFSCORRUPTED; if (xfs_sb_version_hassector(&mp->m_sb)) { log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT; - ASSERT(log->l_sectbb_log <= mp->m_sectbb_log); + if (log->l_sectbb_log < 0 || + log->l_sectbb_log > mp->m_sectbb_log) { + xlog_warn("XFS: Log sector size (0x%x) out of range.", + log->l_sectbb_log); + goto out_free_log; + } + /* for larger sector sizes, must have v2 or external log */ - ASSERT(log->l_sectbb_log == 0 || - log->l_logBBstart == 0 || - xfs_sb_version_haslogv2(&mp->m_sb)); - ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT); + if (log->l_sectbb_log != 0 && + (log->l_logBBstart != 0 && + !xfs_sb_version_haslogv2(&mp->m_sb))) { + xlog_warn("XFS: log sector size (0x%x) invalid " + "for configuration.", log->l_sectbb_log); + goto out_free_log; + } + if (mp->m_sb.sb_logsectlog < BBSHIFT) { + xlog_warn("XFS: Log sector log (0x%x) too small.", + mp->m_sb.sb_logsectlog); + goto out_free_log; + } } log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1; xlog_get_iclog_buffer_size(mp, log); + error = ENOMEM; bp = xfs_buf_get_empty(log->l_iclog_size, mp->m_logdev_targp); if (!bp) goto out_free_log; @@ -1313,7 +1331,8 @@ out_free_iclog: xfs_buf_free(log->l_xbuf); out_free_log: kmem_free(log); - return NULL; +out: + return ERR_PTR(-error); } /* xlog_alloc_log */ -- cgit v0.10.2 From 705db3fd4660174a27418bbcb874d209a76044eb Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 6 Apr 2009 18:40:17 +0200 Subject: xfs: fix double free of inode If we fail to initialise the VFS inode in inode_init_always(), it will call ->delete_inode internally resulting in the inode being freed. Hence we need to delay the call to inode_init_always() until after the XFS inode is sufficient set up to handle a call to ->delete_inode, and then if that fails do not touch the inode again at all as it has been freed. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c index 478e587..89b81ee 100644 --- a/fs/xfs/xfs_iget.c +++ b/fs/xfs/xfs_iget.c @@ -69,15 +69,6 @@ xfs_inode_alloc( ASSERT(!spin_is_locked(&ip->i_flags_lock)); ASSERT(completion_done(&ip->i_flush)); - /* - * initialise the VFS inode here to get failures - * out of the way early. - */ - if (!inode_init_always(mp->m_super, VFS_I(ip))) { - kmem_zone_free(xfs_inode_zone, ip); - return NULL; - } - /* initialise the xfs inode */ ip->i_ino = ino; ip->i_mount = mp; @@ -113,6 +104,20 @@ xfs_inode_alloc( #ifdef XFS_DIR2_TRACE ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS); #endif + /* + * Now initialise the VFS inode. We do this after the xfs_inode + * initialisation as internal failures will result in ->destroy_inode + * being called and that will pass down through the reclaim path and + * free the XFS inode. This path requires the XFS inode to already be + * initialised. Hence if this call fails, the xfs_inode has already + * been freed and we should not reference it at all in the error + * handling. + */ + if (!inode_init_always(mp->m_super, VFS_I(ip))) + return NULL; + + /* prevent anyone from using this yet */ + VFS_I(ip)->i_state = I_NEW|I_LOCK; return ip; } -- cgit v0.10.2 From c626d174cfe38e7f0545d074c299527892cd8c45 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 6 Apr 2009 18:42:11 +0200 Subject: xfs: prevent unwritten extent conversion from blocking I/O completion Unwritten extent conversion can recurse back into the filesystem due to memory allocation. Memory reclaim requires I/O completions to be processed to allow the callers to make progress. If the I/O completion workqueue thread is doing the recursion, then we have a deadlock situation. Move unwritten extent completion into it's own workqueue so it doesn't block I/O completions for normal delayed allocation or overwrite data. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index c13f673..7ec89fc 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -153,23 +153,6 @@ xfs_find_bdev_for_inode( } /* - * Schedule IO completion handling on a xfsdatad if this was - * the final hold on this ioend. If we are asked to wait, - * flush the workqueue. - */ -STATIC void -xfs_finish_ioend( - xfs_ioend_t *ioend, - int wait) -{ - if (atomic_dec_and_test(&ioend->io_remaining)) { - queue_work(xfsdatad_workqueue, &ioend->io_work); - if (wait) - flush_workqueue(xfsdatad_workqueue); - } -} - -/* * We're now finished for good with this ioend structure. * Update the page state via the associated buffer_heads, * release holds on the inode and bio, and finally free @@ -310,6 +293,27 @@ xfs_end_bio_read( } /* + * Schedule IO completion handling on a xfsdatad if this was + * the final hold on this ioend. If we are asked to wait, + * flush the workqueue. + */ +STATIC void +xfs_finish_ioend( + xfs_ioend_t *ioend, + int wait) +{ + if (atomic_dec_and_test(&ioend->io_remaining)) { + struct workqueue_struct *wq = xfsdatad_workqueue; + if (ioend->io_work.func == xfs_end_bio_unwritten) + wq = xfsconvertd_workqueue; + + queue_work(wq, &ioend->io_work); + if (wait) + flush_workqueue(wq); + } +} + +/* * Allocate and initialise an IO completion structure. * We need to track unwritten extent write completion here initially. * We'll need to extend this for updating the ondisk inode size later diff --git a/fs/xfs/linux-2.6/xfs_aops.h b/fs/xfs/linux-2.6/xfs_aops.h index 1dd5288..221b3e6 100644 --- a/fs/xfs/linux-2.6/xfs_aops.h +++ b/fs/xfs/linux-2.6/xfs_aops.h @@ -19,6 +19,7 @@ #define __XFS_AOPS_H__ extern struct workqueue_struct *xfsdatad_workqueue; +extern struct workqueue_struct *xfsconvertd_workqueue; extern mempool_t *xfs_ioend_pool; /* diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index aa1016b..e28800a 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -51,6 +51,7 @@ static struct shrinker xfs_buf_shake = { static struct workqueue_struct *xfslogd_workqueue; struct workqueue_struct *xfsdatad_workqueue; +struct workqueue_struct *xfsconvertd_workqueue; #ifdef XFS_BUF_TRACE void @@ -1775,6 +1776,7 @@ xfs_flush_buftarg( xfs_buf_t *bp, *n; int pincount = 0; + xfs_buf_runall_queues(xfsconvertd_workqueue); xfs_buf_runall_queues(xfsdatad_workqueue); xfs_buf_runall_queues(xfslogd_workqueue); @@ -1831,9 +1833,15 @@ xfs_buf_init(void) if (!xfsdatad_workqueue) goto out_destroy_xfslogd_workqueue; + xfsconvertd_workqueue = create_workqueue("xfsconvertd"); + if (!xfsconvertd_workqueue) + goto out_destroy_xfsdatad_workqueue; + register_shrinker(&xfs_buf_shake); return 0; + out_destroy_xfsdatad_workqueue: + destroy_workqueue(xfsdatad_workqueue); out_destroy_xfslogd_workqueue: destroy_workqueue(xfslogd_workqueue); out_free_buf_zone: @@ -1849,6 +1857,7 @@ void xfs_buf_terminate(void) { unregister_shrinker(&xfs_buf_shake); + destroy_workqueue(xfsconvertd_workqueue); destroy_workqueue(xfsdatad_workqueue); destroy_workqueue(xfslogd_workqueue); kmem_zone_destroy(xfs_buf_zone); -- cgit v0.10.2 From 9d7fef74b23fe57803c5f71fab11630d9ec2cb4b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 6 Apr 2009 18:42:59 +0200 Subject: xfs: inform the xfsaild of the push target before sleeping When trying to reserve log space, we find the amount of space we need, then go to sleep waiting for space. When we are woken, we try to push the tail of the log forward to make sure we have space available. Unfortunately, this means that if there is not space available, and everyone who needs space goes to sleep there is no-one left to push the tail of the log to make space available. Once we have a thread waiting for space to become available, the others queue up behind it in a FIFO, and none of them push the tail of the log. This can result in everyone going to sleep in xlog_grant_log_space() if the first sleeper races with the last I/O that moves the tail of the log forward. With no further I/O tomove the tail of the log, there is nothing to wake the sleepers and hence all transactions just stop. Fix this by making sure the xfsaild will create enough space for the transaction that is about to sleep by moving the push target far enough forwards to ensure that that the curent proceeees will have enough space available when it is woken. That is, we push the AIL before we go to sleep. Because we've inserted the log ticket into the queue before we've pushed and gone to sleep, subsequent transactions will wait behind this one. Hence we are guaranteed to have space available when we are woken. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 8016d30..3750f04 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -2560,18 +2560,19 @@ redo: xlog_ins_ticketq(&log->l_reserve_headq, tic); xlog_trace_loggrant(log, tic, "xlog_grant_log_space: sleep 2"); + spin_unlock(&log->l_grant_lock); + xlog_grant_push_ail(log->l_mp, need_bytes); + spin_lock(&log->l_grant_lock); + XFS_STATS_INC(xs_sleep_logspace); sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s); - if (XLOG_FORCED_SHUTDOWN(log)) { - spin_lock(&log->l_grant_lock); + spin_lock(&log->l_grant_lock); + if (XLOG_FORCED_SHUTDOWN(log)) goto error_return; - } xlog_trace_loggrant(log, tic, "xlog_grant_log_space: wake 2"); - xlog_grant_push_ail(log->l_mp, need_bytes); - spin_lock(&log->l_grant_lock); goto redo; } else if (tic->t_flags & XLOG_TIC_IN_Q) xlog_del_ticketq(&log->l_reserve_headq, tic); @@ -2650,7 +2651,7 @@ xlog_regrant_write_log_space(xlog_t *log, * for more free space, otherwise try to get some space for * this transaction. */ - + need_bytes = tic->t_unit_res; if ((ntic = log->l_write_headq)) { free_bytes = xlog_space_left(log, log->l_grant_write_cycle, log->l_grant_write_bytes); @@ -2670,26 +2671,25 @@ xlog_regrant_write_log_space(xlog_t *log, xlog_trace_loggrant(log, tic, "xlog_regrant_write_log_space: sleep 1"); + spin_unlock(&log->l_grant_lock); + xlog_grant_push_ail(log->l_mp, need_bytes); + spin_lock(&log->l_grant_lock); + XFS_STATS_INC(xs_sleep_logspace); sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s); /* If we're shutting down, this tic is already * off the queue */ - if (XLOG_FORCED_SHUTDOWN(log)) { - spin_lock(&log->l_grant_lock); + spin_lock(&log->l_grant_lock); + if (XLOG_FORCED_SHUTDOWN(log)) goto error_return; - } xlog_trace_loggrant(log, tic, "xlog_regrant_write_log_space: wake 1"); - xlog_grant_push_ail(log->l_mp, tic->t_unit_res); - spin_lock(&log->l_grant_lock); } } - need_bytes = tic->t_unit_res; - redo: if (XLOG_FORCED_SHUTDOWN(log)) goto error_return; @@ -2699,19 +2699,20 @@ redo: if (free_bytes < need_bytes) { if ((tic->t_flags & XLOG_TIC_IN_Q) == 0) xlog_ins_ticketq(&log->l_write_headq, tic); + spin_unlock(&log->l_grant_lock); + xlog_grant_push_ail(log->l_mp, need_bytes); + spin_lock(&log->l_grant_lock); + XFS_STATS_INC(xs_sleep_logspace); sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s); /* If we're shutting down, this tic is already off the queue */ - if (XLOG_FORCED_SHUTDOWN(log)) { - spin_lock(&log->l_grant_lock); + spin_lock(&log->l_grant_lock); + if (XLOG_FORCED_SHUTDOWN(log)) goto error_return; - } xlog_trace_loggrant(log, tic, "xlog_regrant_write_log_space: wake 2"); - xlog_grant_push_ail(log->l_mp, need_bytes); - spin_lock(&log->l_grant_lock); goto redo; } else if (tic->t_flags & XLOG_TIC_IN_Q) xlog_del_ticketq(&log->l_write_headq, tic); -- cgit v0.10.2 From a8d770d987ee20b59fba6c37d7f0f2a351913c4b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 6 Apr 2009 18:44:54 +0200 Subject: xfs: use xfs_sync_inodes() for device flushing Currently xfs_device_flush calls sync_blockdev() which is a no-op for XFS as all it's metadata is held in a different address to the one sync_blockdev() works on. Call xfs_sync_inodes() instead to flush all the delayed allocation blocks out. To do this as efficiently as possible, do it via two passes - one to do an async flush of all the dirty blocks and a second to wait for all the IO to complete. This requires some modification to the xfs-sync_inodes_ag() flush code to do efficiently. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.c b/fs/xfs/linux-2.6/xfs_fs_subr.c index 5aeb777..08be36d 100644 --- a/fs/xfs/linux-2.6/xfs_fs_subr.c +++ b/fs/xfs/linux-2.6/xfs_fs_subr.c @@ -74,14 +74,14 @@ xfs_flush_pages( if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) { xfs_iflags_clear(ip, XFS_ITRUNCATED); - ret = filemap_fdatawrite(mapping); - if (flags & XFS_B_ASYNC) - return -ret; - ret2 = filemap_fdatawait(mapping); - if (!ret) - ret = ret2; + ret = -filemap_fdatawrite(mapping); } - return -ret; + if (flags & XFS_B_ASYNC) + return ret; + ret2 = xfs_wait_on_pages(ip, first, last); + if (!ret) + ret = ret2; + return ret; } int diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c index a608e72..88caafc 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/linux-2.6/xfs_sync.c @@ -62,12 +62,6 @@ xfs_sync_inodes_ag( uint32_t first_index = 0; int error = 0; int last_error = 0; - int fflag = XFS_B_ASYNC; - - if (flags & SYNC_DELWRI) - fflag = XFS_B_DELWRI; - if (flags & SYNC_WAIT) - fflag = 0; /* synchronous overrides all */ do { struct inode *inode; @@ -128,11 +122,23 @@ xfs_sync_inodes_ag( * If we have to flush data or wait for I/O completion * we need to hold the iolock. */ - if ((flags & SYNC_DELWRI) && VN_DIRTY(inode)) { - xfs_ilock(ip, XFS_IOLOCK_SHARED); - lock_flags |= XFS_IOLOCK_SHARED; - error = xfs_flush_pages(ip, 0, -1, fflag, FI_NONE); - if (flags & SYNC_IOWAIT) + if (flags & SYNC_DELWRI) { + if (VN_DIRTY(inode)) { + if (flags & SYNC_TRYLOCK) { + if (xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED)) + lock_flags |= XFS_IOLOCK_SHARED; + } else { + xfs_ilock(ip, XFS_IOLOCK_SHARED); + lock_flags |= XFS_IOLOCK_SHARED; + } + if (lock_flags & XFS_IOLOCK_SHARED) { + error = xfs_flush_pages(ip, 0, -1, + (flags & SYNC_WAIT) ? 0 + : XFS_B_ASYNC, + FI_NONE); + } + } + if (VN_CACHED(inode) && (flags & SYNC_IOWAIT)) xfs_ioend_wait(ip); } xfs_ilock(ip, XFS_ILOCK_SHARED); @@ -400,9 +406,9 @@ xfs_syncd_queue_work( void *data, void (*syncer)(struct xfs_mount *, void *)) { - struct bhv_vfs_sync_work *work; + struct xfs_sync_work *work; - work = kmem_alloc(sizeof(struct bhv_vfs_sync_work), KM_SLEEP); + work = kmem_alloc(sizeof(struct xfs_sync_work), KM_SLEEP); INIT_LIST_HEAD(&work->w_list); work->w_syncer = syncer; work->w_data = data; @@ -445,23 +451,24 @@ xfs_flush_inode( * (IOW, "If at first you don't succeed, use a Bigger Hammer"). */ STATIC void -xfs_flush_device_work( +xfs_flush_inodes_work( struct xfs_mount *mp, void *arg) { struct inode *inode = arg; - sync_blockdev(mp->m_super->s_bdev); + xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK); + xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK | SYNC_IOWAIT); iput(inode); } void -xfs_flush_device( +xfs_flush_inodes( xfs_inode_t *ip) { struct inode *inode = VFS_I(ip); igrab(inode); - xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_device_work); + xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work); delay(msecs_to_jiffies(500)); xfs_log_force(ip->i_mount, (xfs_lsn_t)0, XFS_LOG_FORCE|XFS_LOG_SYNC); } @@ -497,7 +504,7 @@ xfssyncd( { struct xfs_mount *mp = arg; long timeleft; - bhv_vfs_sync_work_t *work, *n; + xfs_sync_work_t *work, *n; LIST_HEAD (tmp); set_freezable(); diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h index 04f058c..ec95e26 100644 --- a/fs/xfs/linux-2.6/xfs_sync.h +++ b/fs/xfs/linux-2.6/xfs_sync.h @@ -21,18 +21,19 @@ struct xfs_mount; struct xfs_perag; -typedef struct bhv_vfs_sync_work { +typedef struct xfs_sync_work { struct list_head w_list; struct xfs_mount *w_mount; void *w_data; /* syncer routine argument */ void (*w_syncer)(struct xfs_mount *, void *); -} bhv_vfs_sync_work_t; +} xfs_sync_work_t; #define SYNC_ATTR 0x0001 /* sync attributes */ #define SYNC_DELWRI 0x0002 /* look at delayed writes */ #define SYNC_WAIT 0x0004 /* wait for i/o to complete */ #define SYNC_BDFLUSH 0x0008 /* BDFLUSH is calling -- don't block */ #define SYNC_IOWAIT 0x0010 /* wait for all I/O to complete */ +#define SYNC_TRYLOCK 0x0020 /* only try to lock inodes */ int xfs_syncd_init(struct xfs_mount *mp); void xfs_syncd_stop(struct xfs_mount *mp); @@ -44,7 +45,7 @@ int xfs_quiesce_data(struct xfs_mount *mp); void xfs_quiesce_attr(struct xfs_mount *mp); void xfs_flush_inode(struct xfs_inode *ip); -void xfs_flush_device(struct xfs_inode *ip); +void xfs_flush_inodes(struct xfs_inode *ip); int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode); int xfs_reclaim_inodes(struct xfs_mount *mp, int noblock, int mode); diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 08ce723..8b97d82 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -361,7 +361,7 @@ xfs_flush_space( return 0; case 2: xfs_iunlock(ip, XFS_ILOCK_EXCL); - xfs_flush_device(ip); + xfs_flush_inodes(ip); xfs_ilock(ip, XFS_ILOCK_EXCL); *fsynced = 3; return 0; diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 7af44ad..d6a6439 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -313,7 +313,7 @@ typedef struct xfs_mount { #endif struct xfs_mru_cache *m_filestream; /* per-mount filestream data */ struct task_struct *m_sync_task; /* generalised sync thread */ - bhv_vfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */ + xfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */ struct list_head m_sync_list; /* sync thread work item list */ spinlock_t m_sync_lock; /* work item list lock */ int m_sync_seq; /* sync thread generation no. */ -- cgit v0.10.2 From 5825294edd3364cbba6514f70d88debec4f6cec7 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 6 Apr 2009 18:45:44 +0200 Subject: xfs: make inode flush at ENOSPC synchronous When we are writing to a single file and hit ENOSPC, we trigger a background flush of the inode and try again. Because we hold page locks and the iolock, the flush won't proceed until after we release these locks. This occurs once we've given up and ENOSPC has been reported. Hence if this one is the only dirty inode in the system, we'll get an ENOSPC prematurely. To fix this, remove the async flush from the allocation routines and move it to the top of the write path where we can do a synchronous flush and retry the write again. Only retry once as a second ENOSPC indicates that we really are ENOSPC. This avoids a page cache deadlock when trying to do this flush synchronously in the allocation layer that was identified by Mikulas Patocka. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c index 7e90daa..9142192 100644 --- a/fs/xfs/linux-2.6/xfs_lrw.c +++ b/fs/xfs/linux-2.6/xfs_lrw.c @@ -751,10 +751,26 @@ start: goto relock; } } else { + int enospc = 0; + ssize_t ret2 = 0; + +write_retry: xfs_rw_enter_trace(XFS_WRITE_ENTER, xip, (void *)iovp, segs, *offset, ioflags); - ret = generic_file_buffered_write(iocb, iovp, segs, + ret2 = generic_file_buffered_write(iocb, iovp, segs, pos, offset, count, ret); + /* + * if we just got an ENOSPC, flush the inode now we + * aren't holding any page locks and retry *once* + */ + if (ret2 == -ENOSPC && !enospc) { + error = xfs_flush_pages(xip, 0, -1, 0, FI_NONE); + if (error) + goto out_unlock_internal; + enospc = 1; + goto write_retry; + } + ret = ret2; } current->backing_dev_info = NULL; diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c index 88caafc..73cf8dc 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/linux-2.6/xfs_sync.c @@ -426,31 +426,6 @@ xfs_syncd_queue_work( * heads, looking about for more room... */ STATIC void -xfs_flush_inode_work( - struct xfs_mount *mp, - void *arg) -{ - struct inode *inode = arg; - filemap_flush(inode->i_mapping); - iput(inode); -} - -void -xfs_flush_inode( - xfs_inode_t *ip) -{ - struct inode *inode = VFS_I(ip); - - igrab(inode); - xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inode_work); - delay(msecs_to_jiffies(500)); -} - -/* - * This is the "bigger hammer" version of xfs_flush_inode_work... - * (IOW, "If at first you don't succeed, use a Bigger Hammer"). - */ -STATIC void xfs_flush_inodes_work( struct xfs_mount *mp, void *arg) diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h index ec95e26..6e83a35 100644 --- a/fs/xfs/linux-2.6/xfs_sync.h +++ b/fs/xfs/linux-2.6/xfs_sync.h @@ -44,7 +44,6 @@ int xfs_sync_fsdata(struct xfs_mount *mp, int flags); int xfs_quiesce_data(struct xfs_mount *mp); void xfs_quiesce_attr(struct xfs_mount *mp); -void xfs_flush_inode(struct xfs_inode *ip); void xfs_flush_inodes(struct xfs_inode *ip); int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode); diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 8b97d82..7b8b170 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -347,7 +347,7 @@ xfs_flush_space( case 0: if (ip->i_delayed_blks) { xfs_iunlock(ip, XFS_ILOCK_EXCL); - xfs_flush_inode(ip); + delay(1); xfs_ilock(ip, XFS_ILOCK_EXCL); *fsynced = 1; } else { -- cgit v0.10.2 From e43afd72d2455defd63a3f94f22fa09b586e58ed Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 6 Apr 2009 18:47:27 +0200 Subject: xfs: block callers of xfs_flush_inodes() correctly xfs_flush_inodes() currently uses a magic timeout to wait for some inodes to be flushed before returning. This isn't really reliable but used to be the best that could be done due to deadlock potential of waiting for the entire flush. Now the inode flush is safe to execute while we hold page and inode locks, we can wait for all the inodes to flush synchronously. Convert the wait mechanism to a completion to do this efficiently. This should remove all remaining spurious ENOSPC errors from the delayed allocation reservation path. This is extracted almost line for line from a larger patch from Mikulas Patocka. Signed-off-by: Mikulas Patocka Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c index 73cf8dc..f7ba766 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/linux-2.6/xfs_sync.c @@ -404,7 +404,8 @@ STATIC void xfs_syncd_queue_work( struct xfs_mount *mp, void *data, - void (*syncer)(struct xfs_mount *, void *)) + void (*syncer)(struct xfs_mount *, void *), + struct completion *completion) { struct xfs_sync_work *work; @@ -413,6 +414,7 @@ xfs_syncd_queue_work( work->w_syncer = syncer; work->w_data = data; work->w_mount = mp; + work->w_completion = completion; spin_lock(&mp->m_sync_lock); list_add_tail(&work->w_list, &mp->m_sync_list); spin_unlock(&mp->m_sync_lock); @@ -441,10 +443,11 @@ xfs_flush_inodes( xfs_inode_t *ip) { struct inode *inode = VFS_I(ip); + DECLARE_COMPLETION_ONSTACK(completion); igrab(inode); - xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work); - delay(msecs_to_jiffies(500)); + xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work, &completion); + wait_for_completion(&completion); xfs_log_force(ip->i_mount, (xfs_lsn_t)0, XFS_LOG_FORCE|XFS_LOG_SYNC); } @@ -514,6 +517,8 @@ xfssyncd( list_del(&work->w_list); if (work == &mp->m_sync_work) continue; + if (work->w_completion) + complete(work->w_completion); kmem_free(work); } } @@ -527,6 +532,7 @@ xfs_syncd_init( { mp->m_sync_work.w_syncer = xfs_sync_worker; mp->m_sync_work.w_mount = mp; + mp->m_sync_work.w_completion = NULL; mp->m_sync_task = kthread_run(xfssyncd, mp, "xfssyncd"); if (IS_ERR(mp->m_sync_task)) return -PTR_ERR(mp->m_sync_task); diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h index 6e83a35..308d5bf 100644 --- a/fs/xfs/linux-2.6/xfs_sync.h +++ b/fs/xfs/linux-2.6/xfs_sync.h @@ -26,6 +26,7 @@ typedef struct xfs_sync_work { struct xfs_mount *w_mount; void *w_data; /* syncer routine argument */ void (*w_syncer)(struct xfs_mount *, void *); + struct completion *w_completion; } xfs_sync_work_t; #define SYNC_ATTR 0x0001 /* sync attributes */ -- cgit v0.10.2 From 153fec43ce5264dfe9f3530b281a2e940b25a0a8 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 6 Apr 2009 18:48:30 +0200 Subject: xfs: flush delayed allcoation blocks on ENOSPC in create If we are creating lots of small files, we can fail to get a reservation for inode create earlier than we should due to EOF preallocation done during delayed allocation reservation. Hence on the first reservation ENOSPC failure flush all the delayed allocation blocks out of the system and retry. This fixes the last commonly triggered spurious ENOSPC issue that has been reported. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 7394c7a..19cf90a 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -1457,6 +1457,13 @@ xfs_create( error = xfs_trans_reserve(tp, resblks, log_res, 0, XFS_TRANS_PERM_LOG_RES, log_count); if (error == ENOSPC) { + /* flush outstanding delalloc blocks and retry */ + xfs_flush_inodes(dp); + error = xfs_trans_reserve(tp, resblks, XFS_CREATE_LOG_RES(mp), 0, + XFS_TRANS_PERM_LOG_RES, XFS_CREATE_LOG_COUNT); + } + if (error == ENOSPC) { + /* No space at all so try a "no-allocation" reservation */ resblks = 0; error = xfs_trans_reserve(tp, 0, log_res, 0, XFS_TRANS_PERM_LOG_RES, log_count); -- cgit v0.10.2 From 8de2bf937a6bea8f0f775fd5399ba20c1a0c3d77 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 6 Apr 2009 18:49:12 +0200 Subject: xfs: remove xfs_flush_space The only thing we need to do now when we get an ENOSPC condition during delayed allocation reservation is flush all the other inodes with delalloc blocks on them and retry without EOF preallocation. Remove the unneeded mess that is xfs_flush_space() and just call xfs_flush_inodes() directly from xfs_iomap_write_delay(). Also, change the location of the retry label to avoid trying to do EOF preallocation because we don't want to do that at ENOSPC. This enables us to remove the BMAPI_SYNC flag as it is no longer used. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 7b8b170..5aaa2d7 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -338,38 +338,6 @@ xfs_iomap_eof_align_last_fsb( } STATIC int -xfs_flush_space( - xfs_inode_t *ip, - int *fsynced, - int *ioflags) -{ - switch (*fsynced) { - case 0: - if (ip->i_delayed_blks) { - xfs_iunlock(ip, XFS_ILOCK_EXCL); - delay(1); - xfs_ilock(ip, XFS_ILOCK_EXCL); - *fsynced = 1; - } else { - *ioflags |= BMAPI_SYNC; - *fsynced = 2; - } - return 0; - case 1: - *fsynced = 2; - *ioflags |= BMAPI_SYNC; - return 0; - case 2: - xfs_iunlock(ip, XFS_ILOCK_EXCL); - xfs_flush_inodes(ip); - xfs_ilock(ip, XFS_ILOCK_EXCL); - *fsynced = 3; - return 0; - } - return 1; -} - -STATIC int xfs_cmn_err_fsblock_zero( xfs_inode_t *ip, xfs_bmbt_irec_t *imap) @@ -538,15 +506,9 @@ error_out: } /* - * If the caller is doing a write at the end of the file, - * then extend the allocation out to the file system's write - * iosize. We clean up any extra space left over when the - * file is closed in xfs_inactive(). - * - * For sync writes, we are flushing delayed allocate space to - * try to make additional space available for allocation near - * the filesystem full boundary - preallocation hurts in that - * situation, of course. + * If the caller is doing a write at the end of the file, then extend the + * allocation out to the file system's write iosize. We clean up any extra + * space left over when the file is closed in xfs_inactive(). */ STATIC int xfs_iomap_eof_want_preallocate( @@ -565,7 +527,7 @@ xfs_iomap_eof_want_preallocate( int n, error, imaps; *prealloc = 0; - if ((ioflag & BMAPI_SYNC) || (offset + count) <= ip->i_size) + if ((offset + count) <= ip->i_size) return 0; /* @@ -611,7 +573,7 @@ xfs_iomap_write_delay( xfs_extlen_t extsz; int nimaps; xfs_bmbt_irec_t imap[XFS_WRITE_IMAPS]; - int prealloc, fsynced = 0; + int prealloc, flushed = 0; int error; ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); @@ -627,12 +589,12 @@ xfs_iomap_write_delay( extsz = xfs_get_extsz_hint(ip); offset_fsb = XFS_B_TO_FSBT(mp, offset); -retry: error = xfs_iomap_eof_want_preallocate(mp, ip, offset, count, ioflag, imap, XFS_WRITE_IMAPS, &prealloc); if (error) return error; +retry: if (prealloc) { aligned_offset = XFS_WRITEIO_ALIGN(mp, (offset + count - 1)); ioalign = XFS_B_TO_FSBT(mp, aligned_offset); @@ -659,15 +621,22 @@ retry: /* * If bmapi returned us nothing, and if we didn't get back EDQUOT, - * then we must have run out of space - flush delalloc, and retry.. + * then we must have run out of space - flush all other inodes with + * delalloc blocks and retry without EOF preallocation. */ if (nimaps == 0) { xfs_iomap_enter_trace(XFS_IOMAP_WRITE_NOSPACE, ip, offset, count); - if (xfs_flush_space(ip, &fsynced, &ioflag)) + if (flushed) return XFS_ERROR(ENOSPC); + xfs_iunlock(ip, XFS_ILOCK_EXCL); + xfs_flush_inodes(ip); + xfs_ilock(ip, XFS_ILOCK_EXCL); + + flushed = 1; error = 0; + prealloc = 0; goto retry; } diff --git a/fs/xfs/xfs_iomap.h b/fs/xfs/xfs_iomap.h index a1cc132..fdcf7b8 100644 --- a/fs/xfs/xfs_iomap.h +++ b/fs/xfs/xfs_iomap.h @@ -40,8 +40,7 @@ typedef enum { BMAPI_IGNSTATE = (1 << 4), /* ignore unwritten state on read */ BMAPI_DIRECT = (1 << 5), /* direct instead of buffered write */ BMAPI_MMAP = (1 << 6), /* allocate for mmap write */ - BMAPI_SYNC = (1 << 7), /* sync write to flush delalloc space */ - BMAPI_TRYLOCK = (1 << 8), /* non-blocking request */ + BMAPI_TRYLOCK = (1 << 7), /* non-blocking request */ } bmapi_flags_t; -- cgit v0.10.2 From 556b0f58bbcdc96ba8ed67001b4e57c50198da89 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 10 Jan 2009 14:53:15 +0000 Subject: Revert "fix modules_install via NFS" This reverts commit 8b249b6856f16f09b0e5b79ce5f4d435e439b9d6. This 'fix' is not necessary; we just need to undo the damage caused accidentally by Igor/Mauro in 4b29631db33292d416dc395c56122ea865e7635c ("V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card") Signed-off-by: David Woodhouse diff --git a/firmware/.gitignore b/firmware/.gitignore index f89a21f..d9c6901 100644 --- a/firmware/.gitignore +++ b/firmware/.gitignore @@ -3,3 +3,4 @@ *.bin *.csp *.dsp +ihex2fw diff --git a/firmware/Makefile b/firmware/Makefile index 14fdd07..185c8dc 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -118,10 +118,10 @@ quiet_cmd_ihex = IHEX $@ cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@ quiet_cmd_ihex2fw = IHEX2FW $@ - cmd_ihex2fw = $(objtree)/scripts/ihex2fw $< $@ + cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@ quiet_cmd_h16tofw = H16TOFW $@ - cmd_h16tofw = $(objtree)/scripts/ihex2fw -w $< $@ + cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@ quiet_cmd_fwbin = MK_FW $@ cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \ @@ -184,11 +184,11 @@ $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %) # is actually meaningful, because the firmware has to be loaded in a certain # order rather than as a single binary blob. Thus, we convert them into our # more compact binary representation of ihex records () -$(obj)/%.fw: $(obj)/%.HEX | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %) $(call cmd,ihex2fw) # .H16 is our own modified form of Intel HEX, with 16-bit length for records. -$(obj)/%.fw: $(obj)/%.H16 | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %) $(call cmd,h16tofw) $(firmware-dirs): @@ -205,3 +205,5 @@ targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ # Without this, built-in.o won't be created when it's empty, and the # final vmlinux link will fail. obj-n := dummy + +hostprogs-y := ihex2fw diff --git a/firmware/ihex2fw.c b/firmware/ihex2fw.c new file mode 100644 index 0000000..8f7fdaa --- /dev/null +++ b/firmware/ihex2fw.c @@ -0,0 +1,268 @@ +/* + * Parser/loader for IHEX formatted data. + * + * Copyright © 2008 David Woodhouse + * Copyright © 2005 Jan Harkes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#define _GNU_SOURCE +#include + + +struct ihex_binrec { + struct ihex_binrec *next; /* not part of the real data structure */ + uint32_t addr; + uint16_t len; + uint8_t data[]; +}; + +/** + * nybble/hex are little helpers to parse hexadecimal numbers to a byte value + **/ +static uint8_t nybble(const uint8_t n) +{ + if (n >= '0' && n <= '9') return n - '0'; + else if (n >= 'A' && n <= 'F') return n - ('A' - 10); + else if (n >= 'a' && n <= 'f') return n - ('a' - 10); + return 0; +} + +static uint8_t hex(const uint8_t *data, uint8_t *crc) +{ + uint8_t val = (nybble(data[0]) << 4) | nybble(data[1]); + *crc += val; + return val; +} + +static int process_ihex(uint8_t *data, ssize_t size); +static void file_record(struct ihex_binrec *record); +static int output_records(int outfd); + +static int sort_records = 0; +static int wide_records = 0; + +int usage(void) +{ + fprintf(stderr, "ihex2fw: Convert ihex files into binary " + "representation for use by Linux kernel\n"); + fprintf(stderr, "usage: ihex2fw [] \n"); + fprintf(stderr, " -w: wide records (16-bit length)\n"); + fprintf(stderr, " -s: sort records by address\n"); + return 1; +} + +int main(int argc, char **argv) +{ + int infd, outfd; + struct stat st; + uint8_t *data; + int opt; + + while ((opt = getopt(argc, argv, "ws")) != -1) { + switch (opt) { + case 'w': + wide_records = 1; + break; + case 's': + sort_records = 1; + break; + default: + return usage(); + } + } + + if (optind + 2 != argc) + return usage(); + + if (!strcmp(argv[optind], "-")) + infd = 0; + else + infd = open(argv[optind], O_RDONLY); + if (infd == -1) { + fprintf(stderr, "Failed to open source file: %s", + strerror(errno)); + return usage(); + } + if (fstat(infd, &st)) { + perror("stat"); + return 1; + } + data = mmap(NULL, st.st_size, PROT_READ, MAP_SHARED, infd, 0); + if (data == MAP_FAILED) { + perror("mmap"); + return 1; + } + + if (!strcmp(argv[optind+1], "-")) + outfd = 1; + else + outfd = open(argv[optind+1], O_TRUNC|O_CREAT|O_WRONLY, 0644); + if (outfd == -1) { + fprintf(stderr, "Failed to open destination file: %s", + strerror(errno)); + return usage(); + } + if (process_ihex(data, st.st_size)) + return 1; + + output_records(outfd); + return 0; +} + +static int process_ihex(uint8_t *data, ssize_t size) +{ + struct ihex_binrec *record; + uint32_t offset = 0; + uint8_t type, crc = 0, crcbyte = 0; + int i, j; + int line = 1; + int len; + + i = 0; +next_record: + /* search for the start of record character */ + while (i < size) { + if (data[i] == '\n') line++; + if (data[i++] == ':') break; + } + + /* Minimum record length would be about 10 characters */ + if (i + 10 > size) { + fprintf(stderr, "Can't find valid record at line %d\n", line); + return -EINVAL; + } + + len = hex(data + i, &crc); i += 2; + if (wide_records) { + len <<= 8; + len += hex(data + i, &crc); i += 2; + } + record = malloc((sizeof (*record) + len + 3) & ~3); + if (!record) { + fprintf(stderr, "out of memory for records\n"); + return -ENOMEM; + } + memset(record, 0, (sizeof(*record) + len + 3) & ~3); + record->len = len; + + /* now check if we have enough data to read everything */ + if (i + 8 + (record->len * 2) > size) { + fprintf(stderr, "Not enough data to read complete record at line %d\n", + line); + return -EINVAL; + } + + record->addr = hex(data + i, &crc) << 8; i += 2; + record->addr |= hex(data + i, &crc); i += 2; + type = hex(data + i, &crc); i += 2; + + for (j = 0; j < record->len; j++, i += 2) + record->data[j] = hex(data + i, &crc); + + /* check CRC */ + crcbyte = hex(data + i, &crc); i += 2; + if (crc != 0) { + fprintf(stderr, "CRC failure at line %d: got 0x%X, expected 0x%X\n", + line, crcbyte, (unsigned char)(crcbyte-crc)); + return -EINVAL; + } + + /* Done reading the record */ + switch (type) { + case 0: + /* old style EOF record? */ + if (!record->len) + break; + + record->addr += offset; + file_record(record); + goto next_record; + + case 1: /* End-Of-File Record */ + if (record->addr || record->len) { + fprintf(stderr, "Bad EOF record (type 01) format at line %d", + line); + return -EINVAL; + } + break; + + case 2: /* Extended Segment Address Record (HEX86) */ + case 4: /* Extended Linear Address Record (HEX386) */ + if (record->addr || record->len != 2) { + fprintf(stderr, "Bad HEX86/HEX386 record (type %02X) at line %d\n", + type, line); + return -EINVAL; + } + + /* We shouldn't really be using the offset for HEX86 because + * the wraparound case is specified quite differently. */ + offset = record->data[0] << 8 | record->data[1]; + offset <<= (type == 2 ? 4 : 16); + goto next_record; + + case 3: /* Start Segment Address Record */ + case 5: /* Start Linear Address Record */ + if (record->addr || record->len != 4) { + fprintf(stderr, "Bad Start Address record (type %02X) at line %d\n", + type, line); + return -EINVAL; + } + + /* These records contain the CS/IP or EIP where execution + * starts. Don't really know what to do with them. */ + goto next_record; + + default: + fprintf(stderr, "Unknown record (type %02X)\n", type); + return -EINVAL; + } + + return 0; +} + +static struct ihex_binrec *records; + +static void file_record(struct ihex_binrec *record) +{ + struct ihex_binrec **p = &records; + + while ((*p) && (!sort_records || (*p)->addr < record->addr)) + p = &((*p)->next); + + record->next = *p; + *p = record; +} + +static int output_records(int outfd) +{ + unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0}; + struct ihex_binrec *p = records; + + while (p) { + uint16_t writelen = (p->len + 9) & ~3; + + p->addr = htonl(p->addr); + p->len = htons(p->len); + write(outfd, &p->addr, writelen); + p = p->next; + } + /* EOF record is zero length, since we don't bother to represent + the type field in the binary version */ + write(outfd, zeroes, 6); + return 0; +} diff --git a/scripts/.gitignore b/scripts/.gitignore index 09e2406..b939fbd 100644 --- a/scripts/.gitignore +++ b/scripts/.gitignore @@ -1,7 +1,6 @@ # # Generated files # -ihex2fw conmakehash kallsyms pnmtologo diff --git a/scripts/Makefile b/scripts/Makefile index 035182e..aafdf06 100644 --- a/scripts/Makefile +++ b/scripts/Makefile @@ -2,12 +2,11 @@ # scripts contains sources for various helper programs used throughout # the kernel for the build process. # --------------------------------------------------------------------------- -# ihex2fw: Parser/loader for IHEX formatted data # kallsyms: Find all symbols in vmlinux # pnmttologo: Convert pnm files to logo files +# conmakehash: Create chartable # conmakehash: Create arrays for initializing the kernel console tables -hostprogs-y := ihex2fw hostprogs-$(CONFIG_KALLSYMS) += kallsyms hostprogs-$(CONFIG_LOGO) += pnmtologo hostprogs-$(CONFIG_VT) += conmakehash diff --git a/scripts/ihex2fw.c b/scripts/ihex2fw.c deleted file mode 100644 index 8f7fdaa..0000000 --- a/scripts/ihex2fw.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Parser/loader for IHEX formatted data. - * - * Copyright © 2008 David Woodhouse - * Copyright © 2005 Jan Harkes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#define _GNU_SOURCE -#include - - -struct ihex_binrec { - struct ihex_binrec *next; /* not part of the real data structure */ - uint32_t addr; - uint16_t len; - uint8_t data[]; -}; - -/** - * nybble/hex are little helpers to parse hexadecimal numbers to a byte value - **/ -static uint8_t nybble(const uint8_t n) -{ - if (n >= '0' && n <= '9') return n - '0'; - else if (n >= 'A' && n <= 'F') return n - ('A' - 10); - else if (n >= 'a' && n <= 'f') return n - ('a' - 10); - return 0; -} - -static uint8_t hex(const uint8_t *data, uint8_t *crc) -{ - uint8_t val = (nybble(data[0]) << 4) | nybble(data[1]); - *crc += val; - return val; -} - -static int process_ihex(uint8_t *data, ssize_t size); -static void file_record(struct ihex_binrec *record); -static int output_records(int outfd); - -static int sort_records = 0; -static int wide_records = 0; - -int usage(void) -{ - fprintf(stderr, "ihex2fw: Convert ihex files into binary " - "representation for use by Linux kernel\n"); - fprintf(stderr, "usage: ihex2fw [] \n"); - fprintf(stderr, " -w: wide records (16-bit length)\n"); - fprintf(stderr, " -s: sort records by address\n"); - return 1; -} - -int main(int argc, char **argv) -{ - int infd, outfd; - struct stat st; - uint8_t *data; - int opt; - - while ((opt = getopt(argc, argv, "ws")) != -1) { - switch (opt) { - case 'w': - wide_records = 1; - break; - case 's': - sort_records = 1; - break; - default: - return usage(); - } - } - - if (optind + 2 != argc) - return usage(); - - if (!strcmp(argv[optind], "-")) - infd = 0; - else - infd = open(argv[optind], O_RDONLY); - if (infd == -1) { - fprintf(stderr, "Failed to open source file: %s", - strerror(errno)); - return usage(); - } - if (fstat(infd, &st)) { - perror("stat"); - return 1; - } - data = mmap(NULL, st.st_size, PROT_READ, MAP_SHARED, infd, 0); - if (data == MAP_FAILED) { - perror("mmap"); - return 1; - } - - if (!strcmp(argv[optind+1], "-")) - outfd = 1; - else - outfd = open(argv[optind+1], O_TRUNC|O_CREAT|O_WRONLY, 0644); - if (outfd == -1) { - fprintf(stderr, "Failed to open destination file: %s", - strerror(errno)); - return usage(); - } - if (process_ihex(data, st.st_size)) - return 1; - - output_records(outfd); - return 0; -} - -static int process_ihex(uint8_t *data, ssize_t size) -{ - struct ihex_binrec *record; - uint32_t offset = 0; - uint8_t type, crc = 0, crcbyte = 0; - int i, j; - int line = 1; - int len; - - i = 0; -next_record: - /* search for the start of record character */ - while (i < size) { - if (data[i] == '\n') line++; - if (data[i++] == ':') break; - } - - /* Minimum record length would be about 10 characters */ - if (i + 10 > size) { - fprintf(stderr, "Can't find valid record at line %d\n", line); - return -EINVAL; - } - - len = hex(data + i, &crc); i += 2; - if (wide_records) { - len <<= 8; - len += hex(data + i, &crc); i += 2; - } - record = malloc((sizeof (*record) + len + 3) & ~3); - if (!record) { - fprintf(stderr, "out of memory for records\n"); - return -ENOMEM; - } - memset(record, 0, (sizeof(*record) + len + 3) & ~3); - record->len = len; - - /* now check if we have enough data to read everything */ - if (i + 8 + (record->len * 2) > size) { - fprintf(stderr, "Not enough data to read complete record at line %d\n", - line); - return -EINVAL; - } - - record->addr = hex(data + i, &crc) << 8; i += 2; - record->addr |= hex(data + i, &crc); i += 2; - type = hex(data + i, &crc); i += 2; - - for (j = 0; j < record->len; j++, i += 2) - record->data[j] = hex(data + i, &crc); - - /* check CRC */ - crcbyte = hex(data + i, &crc); i += 2; - if (crc != 0) { - fprintf(stderr, "CRC failure at line %d: got 0x%X, expected 0x%X\n", - line, crcbyte, (unsigned char)(crcbyte-crc)); - return -EINVAL; - } - - /* Done reading the record */ - switch (type) { - case 0: - /* old style EOF record? */ - if (!record->len) - break; - - record->addr += offset; - file_record(record); - goto next_record; - - case 1: /* End-Of-File Record */ - if (record->addr || record->len) { - fprintf(stderr, "Bad EOF record (type 01) format at line %d", - line); - return -EINVAL; - } - break; - - case 2: /* Extended Segment Address Record (HEX86) */ - case 4: /* Extended Linear Address Record (HEX386) */ - if (record->addr || record->len != 2) { - fprintf(stderr, "Bad HEX86/HEX386 record (type %02X) at line %d\n", - type, line); - return -EINVAL; - } - - /* We shouldn't really be using the offset for HEX86 because - * the wraparound case is specified quite differently. */ - offset = record->data[0] << 8 | record->data[1]; - offset <<= (type == 2 ? 4 : 16); - goto next_record; - - case 3: /* Start Segment Address Record */ - case 5: /* Start Linear Address Record */ - if (record->addr || record->len != 4) { - fprintf(stderr, "Bad Start Address record (type %02X) at line %d\n", - type, line); - return -EINVAL; - } - - /* These records contain the CS/IP or EIP where execution - * starts. Don't really know what to do with them. */ - goto next_record; - - default: - fprintf(stderr, "Unknown record (type %02X)\n", type); - return -EINVAL; - } - - return 0; -} - -static struct ihex_binrec *records; - -static void file_record(struct ihex_binrec *record) -{ - struct ihex_binrec **p = &records; - - while ((*p) && (!sort_records || (*p)->addr < record->addr)) - p = &((*p)->next); - - record->next = *p; - *p = record; -} - -static int output_records(int outfd) -{ - unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0}; - struct ihex_binrec *p = records; - - while (p) { - uint16_t writelen = (p->len + 9) & ~3; - - p->addr = htonl(p->addr); - p->len = htons(p->len); - write(outfd, &p->addr, writelen); - p = p->next; - } - /* EOF record is zero length, since we don't bother to represent - the type field in the binary version */ - write(outfd, zeroes, 6); - return 0; -} -- cgit v0.10.2 From 4528e429009325790d94cd4f816b386bea8e8291 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 10 Jan 2009 14:54:48 +0000 Subject: Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card" This reverts a hunk of commit 4b29631db33292d416dc395c56122ea865e7635c which seems to have been an accident, and which re-introduced a previously fixed bug. Signed-off-by: David Woodhouse diff --git a/firmware/Makefile b/firmware/Makefile index 185c8dc..95fb42c 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -180,15 +180,27 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/% $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %) $(call cmd,ihex) +# Don't depend on ihex2fw if we're installing and it already exists. +# Putting it after | in the dependencies doesn't seem sufficient when +# we're installing after a cross-compile, because ihex2fw has dependencies +# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and +# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree +# is exported read-only for someone to run 'make install'. +ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw) +ihex2fw_dep := +else +ihex2fw_dep := $(obj)/ihex2fw +endif + # .HEX is also Intel HEX, but where the offset and length in each record # is actually meaningful, because the firmware has to be loaded in a certain # order rather than as a single binary blob. Thus, we convert them into our # more compact binary representation of ihex records () -$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) $(call cmd,ihex2fw) # .H16 is our own modified form of Intel HEX, with 16-bit length for records. -$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) $(call cmd,h16tofw) $(firmware-dirs): -- cgit v0.10.2 From 9137f05f7e72517d44b6b0c15b11b419ecb5d201 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Date: Mon, 6 Apr 2009 14:34:12 -0700 Subject: firmware: convert av7110 driver to request_firmware() Signed-off-by: Jaswinder Singh Signed-off-by: David Woodhouse diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index 3a3f527..5e3f889 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -198,29 +198,10 @@ static int load_dram(struct av7110 *av7110, u32 *data, int len) /* we cannot write av7110 DRAM directly, so load a bootloader into * the DPRAM which implements a simple boot protocol */ -static u8 bootcode[] = { - 0xea, 0x00, 0x00, 0x0e, 0xe1, 0xb0, 0xf0, 0x0e, 0xe2, 0x5e, 0xf0, 0x04, - 0xe2, 0x5e, 0xf0, 0x04, 0xe2, 0x5e, 0xf0, 0x08, 0xe2, 0x5e, 0xf0, 0x04, - 0xe2, 0x5e, 0xf0, 0x04, 0xe2, 0x5e, 0xf0, 0x04, 0x2c, 0x00, 0x00, 0x24, - 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x2c, 0x00, 0x00, 0x34, - 0x00, 0x00, 0x00, 0x00, 0xa5, 0xa5, 0x5a, 0x5a, 0x00, 0x1f, 0x15, 0x55, - 0x00, 0x00, 0x00, 0x09, 0xe5, 0x9f, 0xd0, 0x7c, 0xe5, 0x9f, 0x40, 0x74, - 0xe3, 0xa0, 0x00, 0x00, 0xe5, 0x84, 0x00, 0x00, 0xe5, 0x84, 0x00, 0x04, - 0xe5, 0x9f, 0x10, 0x70, 0xe5, 0x9f, 0x20, 0x70, 0xe5, 0x9f, 0x30, 0x64, - 0xe8, 0xb1, 0x1f, 0xe0, 0xe8, 0xa3, 0x1f, 0xe0, 0xe1, 0x51, 0x00, 0x02, - 0xda, 0xff, 0xff, 0xfb, 0xe5, 0x9f, 0xf0, 0x50, 0xe1, 0xd4, 0x10, 0xb0, - 0xe3, 0x51, 0x00, 0x00, 0x0a, 0xff, 0xff, 0xfc, 0xe1, 0xa0, 0x10, 0x0d, - 0xe5, 0x94, 0x30, 0x04, 0xe1, 0xd4, 0x20, 0xb2, 0xe2, 0x82, 0x20, 0x3f, - 0xe1, 0xb0, 0x23, 0x22, 0x03, 0xa0, 0x00, 0x02, 0xe1, 0xc4, 0x00, 0xb0, - 0x0a, 0xff, 0xff, 0xf4, 0xe8, 0xb1, 0x1f, 0xe0, 0xe8, 0xa3, 0x1f, 0xe0, - 0xe8, 0xb1, 0x1f, 0xe0, 0xe8, 0xa3, 0x1f, 0xe0, 0xe2, 0x52, 0x20, 0x01, - 0x1a, 0xff, 0xff, 0xf9, 0xe2, 0x2d, 0xdb, 0x05, 0xea, 0xff, 0xff, 0xec, - 0x2c, 0x00, 0x03, 0xf8, 0x2c, 0x00, 0x04, 0x00, 0x9e, 0x00, 0x08, 0x00, - 0x2c, 0x00, 0x00, 0x74, 0x2c, 0x00, 0x00, 0xc0 -}; - int av7110_bootarm(struct av7110 *av7110) { + const struct firmware *fw; + const char *fw_name = "av7110/bootcode.bin"; struct saa7146_dev *dev = av7110->dev; u32 ret; int i; @@ -261,7 +242,15 @@ int av7110_bootarm(struct av7110 *av7110) //saa7146_setgpio(dev, DEBI_DONE_LINE, SAA7146_GPIO_INPUT); //saa7146_setgpio(dev, 3, SAA7146_GPIO_INPUT); - mwdebi(av7110, DEBISWAB, DPRAM_BASE, bootcode, sizeof(bootcode)); + ret = request_firmware(&fw, fw_name, &dev->pci->dev); + if (ret) { + printk(KERN_ERR "dvb-ttpci: Failed to load firmware \"%s\"\n", + fw_name); + return ret; + } + + mwdebi(av7110, DEBISWAB, DPRAM_BASE, fw->data, fw->size); + release_firmware(fw); iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2); if (saa7146_wait_for_debi_done(av7110->dev, 1)) { @@ -302,7 +291,7 @@ int av7110_bootarm(struct av7110 *av7110) av7110->arm_ready = 1; return 0; } - +MODULE_FIRMWARE("av7110/bootcode.bin"); /**************************************************************************** * DEBI command polling diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/dvb/ttpci/av7110_hw.h index ca99e5c..1634aba 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.h +++ b/drivers/media/dvb/ttpci/av7110_hw.h @@ -390,7 +390,8 @@ static inline void iwdebi(struct av7110 *av7110, u32 config, int addr, u32 val, } /* buffer writes */ -static inline void mwdebi(struct av7110 *av7110, u32 config, int addr, u8 *val, int count) +static inline void mwdebi(struct av7110 *av7110, u32 config, int addr, + const u8 *val, int count) { memcpy(av7110->debi_virt, val, count); av7110_debiwrite(av7110, config, addr, 0, count); diff --git a/firmware/Makefile b/firmware/Makefile index 95fb42c..4267f68 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -37,6 +37,7 @@ fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \ cxgb3/t3c_psram-1.1.0.bin \ cxgb3/t3fw-7.1.0.bin +fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ e100/d102e_ucode.bin diff --git a/firmware/WHENCE b/firmware/WHENCE index c006af8..c0a7c8f 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -632,3 +632,13 @@ Licence: Unknown Found in hex form in kernel source. -------------------------------------------------------------------------- + +Driver: DVB AV7110 -- AV7110 cards + +File: av7110/bootcode.bin + +Licence: GPLv2 or later + +ARM assembly source code available at http://www.linuxtv.org/downloads/firmware/Boot.S + +-------------------------------------------------------------------------- diff --git a/firmware/av7110/Boot.S b/firmware/av7110/Boot.S new file mode 100644 index 0000000..d562fdc --- /dev/null +++ b/firmware/av7110/Boot.S @@ -0,0 +1,109 @@ +/* + Boot.S: boot loader for Siemens DVB-S card + + Copyright (C) 2001 Convergence integrated media GmbH + Written by Ralph Metzler + + Copyright (C) 2006 Matthieu CASTET + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + +*/ + +/* + check AV711x_3_1.pdf for some hardware infos + build it with : + $ cc -mbig-endian -c Boot.S + $ ld -Ttext 0x2c000000 -EB -o Boot Boot.o + $ objcopy -Obinary Boot +*/ + + .text + .align + .globl _start +_start: + b reset // reset vector + movs pc, r14 // undefined + subs pc, r14, #4 // SWI + subs pc, r14, #4 // prefetch abort + subs pc, r14, #8 // data abort + subs pc, r14, #4 // reserved + subs pc, r14, #4 // IRQ + subs pc, r14, #4 // FIQ + + .word tbl // table needed by firmware ROM +tbl: .word (endtbl - tbl) + .word 0 + .word conf +endtbl: .word 0 +conf: .word 0xa5a55a5a + .word 0x001f1555 + .word 0x00000009 + +reset: ldr r13, buffer + ldr r4, flag + mov r0, #0 + str r0, [r4] + str r0, [r4, #4] + + ldr r1, wait_address + ldr r2, flag_address + ldr r3, sram + +copycode: // copy the code HW Sram + ldmia r1!, {r5-r12} + stmia r3!, {r5-r12} + cmp r1, r2 + ble copycode + ldr pc, sram // jump to the copied code + +wait: ldrh r1, [r4] // wait for flag!=0 + cmp r1, #0 + beq wait + + mov r1, r13 // buffer address + ldr r3, [r4,#4] // destaddr + + ldrh r2, [r4,#2] // get segment length + add r2, r2, #63 // round length to next 64 bytes + movs r2, r2, lsr #6 // and divide by 64 + moveq r0, #2 // if 0, set flag to 2, else signal + strh r0, [r4] // that buffer is accepted by setting to 0 + beq wait + +copyloop: + ldmia r1!, {r5-r12} + stmia r3!, {r5-r12} + ldmia r1!, {r5-r12} + stmia r3!, {r5-r12} + subs r2, r2, #1 + bne copyloop + + eor r13, r13, #0x1400 // switch to other buffer + b wait + +// flag is stored at 0x2c0003f8, length at 0x2c0003fa, +// destaddr at 0x2c0003fc + +flag: .word 0x2c0003f8 + + +// buffer 1 is at 0x2c000400, buffer 2 at 0x2c001000 + +buffer: .word 0x2c000400 + +sram: .word 0x9e000800 +wait_address: .word wait +flag_address: .word flag diff --git a/firmware/av7110/bootcode.bin.ihex b/firmware/av7110/bootcode.bin.ihex new file mode 100644 index 0000000..26a2993 --- /dev/null +++ b/firmware/av7110/bootcode.bin.ihex @@ -0,0 +1,15 @@ +:10000000EA00000EE1B0F00EE25EF004E25EF00401 +:10001000E25EF008E25EF004E25EF004E25EF0040C +:100020002C0000240000000C000000002C00003414 +:1000300000000000A5A55A5A001F15550000000930 +:10004000E59FD07CE59F4074E3A00000E5840000BC +:10005000E5840004E59F1070E59F2070E59F306403 +:10006000E8B11FE0E8A31FE0E1510002DAFFFFFB67 +:10007000E59FF050E1D410B0E35100000AFFFFFC0F +:10008000E1A0100DE5943004E1D420B2E282203FDB +:10009000E1B0232203A00002E1C400B00AFFFFF494 +:1000A000E8B11FE0E8A31FE0E8B11FE0E8A31FE00C +:1000B000E25220011AFFFFF9E22DDB05EAFFFFEC17 +:1000C0002C0003F82C0004009E0008002C00007493 +:0400D0002C0000C040 +:00000001FF -- cgit v0.10.2 From 4f8d182513690b42b20fb81e487be4cd4729e27c Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Date: Sun, 22 Jun 2008 18:24:19 +0530 Subject: Remove fdump tool for av7110 firmware There's no point in this, since the user can use the BUILTIN_FIRMWARE option to include arbitrary firmware files directly in the kernel image. Thanks to David Woodhouse for help. Signed-off-by: Jaswinder Singh Signed-off-by: David Woodhouse diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 7729904..68eb449 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -28,25 +28,12 @@ config DVB_AV7110 download/extract it, and then copy it to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). - Say Y if you own such a card and want to use it. - -config DVB_AV7110_FIRMWARE - bool "Compile AV7110 firmware into the driver" - depends on DVB_AV7110 && !STANDALONE - default y if DVB_AV7110=y - help - The AV7110 firmware is normally loaded by the firmware hotplug manager. - If you want to compile the firmware into the driver you need to say - Y here and provide the correct path of the firmware. You need this - option if you want to compile the whole driver statically into the - kernel. + Alternatively, you can download the file and use the kernel's + EXTRA_FIRMWARE configuration option to build it into your + kernel image by adding the filename to the EXTRA_FIRMWARE + configuration option string. - All other people say N. - -config DVB_AV7110_FIRMWARE_FILE - string "Full pathname of av7110 firmware file" - depends on DVB_AV7110_FIRMWARE - default "/usr/lib/hotplug/firmware/dvb-ttpci-01.fw" + Say Y if you own such a card and want to use it. config DVB_AV7110_OSD bool "AV7110 OSD support" diff --git a/drivers/media/dvb/ttpci/Makefile b/drivers/media/dvb/ttpci/Makefile index 7145123..8a4d5bb 100644 --- a/drivers/media/dvb/ttpci/Makefile +++ b/drivers/media/dvb/ttpci/Makefile @@ -19,12 +19,3 @@ obj-$(CONFIG_DVB_AV7110) += dvb-ttpci.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ EXTRA_CFLAGS += -Idrivers/media/common/tuners - -hostprogs-y := fdump - -ifeq ($(CONFIG_DVB_AV7110_FIRMWARE),y) -$(obj)/av7110.o: $(obj)/av7110_firm.h - -$(obj)/av7110_firm.h: $(obj)/fdump - $(obj)/fdump $(CONFIG_DVB_AV7110_FIRMWARE_FILE) dvb_ttpci_fw $@ -endif diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 4624cee..d1d959e 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -1518,20 +1518,6 @@ static int check_firmware(struct av7110* av7110) return 0; } -#ifdef CONFIG_DVB_AV7110_FIRMWARE_FILE -#include "av7110_firm.h" -static void put_firmware(struct av7110* av7110) -{ - av7110->bin_fw = NULL; -} - -static inline int get_firmware(struct av7110* av7110) -{ - av7110->bin_fw = dvb_ttpci_fw; - av7110->size_fw = sizeof(dvb_ttpci_fw); - return check_firmware(av7110); -} -#else static void put_firmware(struct av7110* av7110) { vfree(av7110->bin_fw); @@ -1580,8 +1566,6 @@ static int get_firmware(struct av7110* av7110) release_firmware(fw); return ret; } -#endif - static int alps_bsrv2_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) { diff --git a/drivers/media/dvb/ttpci/fdump.c b/drivers/media/dvb/ttpci/fdump.c deleted file mode 100644 index c90001d..0000000 --- a/drivers/media/dvb/ttpci/fdump.c +++ /dev/null @@ -1,44 +0,0 @@ -#include -#include -#include -#include -#include - -int main(int argc, char **argv) -{ - unsigned char buf[8]; - unsigned int i, count, bytes = 0; - FILE *fd_in, *fd_out; - - if (argc != 4) { - fprintf(stderr, "\n\tusage: %s \n\n", argv[0]); - return -1; - } - - fd_in = fopen(argv[1], "rb"); - if (fd_in == NULL) { - fprintf(stderr, "firmware file '%s' not found\n", argv[1]); - return -1; - } - - fd_out = fopen(argv[3], "w+"); - if (fd_out == NULL) { - fprintf(stderr, "cannot create output file '%s'\n", argv[3]); - return -1; - } - - fprintf(fd_out, "\n#include \n\nu8 %s [] = {", argv[2]); - - while ((count = fread(buf, 1, 8, fd_in)) > 0) { - fprintf(fd_out, "\n\t"); - for (i = 0; i < count; i++, bytes++) - fprintf(fd_out, "0x%02x, ", buf[i]); - } - - fprintf(fd_out, "\n};\n\n"); - - fclose(fd_in); - fclose(fd_out); - - return 0; -} -- cgit v0.10.2 From 7c7cae17e04765692aa3d2bda5c771f909219f27 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 6 Apr 2009 14:38:43 -0700 Subject: ALSA: wavefront - Always use request_firmware() Always use request_firmware() for loading yss225_registers image. Signed-off-by: Takashi Iwai Signed-off-by: David Woodhouse diff --git a/firmware/Makefile b/firmware/Makefile index 4267f68..a19e579 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -63,6 +63,7 @@ fw-shipped-$(CONFIG_SXG) += sxg/saharadownloadB.sys \ sxg/saharadbgdownloadB.sys fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \ yamaha/ds1e_ctrl.fw +fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \ tigon/tg3_tso5.bin diff --git a/firmware/WHENCE b/firmware/WHENCE index c0a7c8f..ff41dbf 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -642,3 +642,15 @@ Licence: GPLv2 or later ARM assembly source code available at http://www.linuxtv.org/downloads/firmware/Boot.S -------------------------------------------------------------------------- + +Driver: wavefront - ISA WaveFront sound card + +File: yamaha/yss225_registers.bin + +Licence: Allegedly GPLv2+, but no source visible. + +Found in hex form in kernel source, with the following comment: + Copyright (c) 1998-2002 by Paul Davis + + +-------------------------------------------------------------------------- diff --git a/firmware/yamaha/yss225_registers.bin.ihex b/firmware/yamaha/yss225_registers.bin.ihex new file mode 100644 index 0000000..6dd3d8c --- /dev/null +++ b/firmware/yamaha/yss225_registers.bin.ihex @@ -0,0 +1,998 @@ +:10000000FF000E100F00FF000E110F00FF000E1278 +:100010000F00FF000E130F00FF000E140F00FF0073 +:100020000E150F00FF000E160F00FF000E170F0039 +:10003000FF000E180F00FF000E190F00FF000E1A30 +:100040000F00FF000E1B0F00FF000E1C0F00FF0033 +:100050000E1D0F00FF000E1E0F00FF000E1F0F00F1 +:10006000FF000E200F00FF000E210F00FF000E22E8 +:100070000F00FF000E230F00FF000E240F00FF00F3 +:100080000E250F00FF000E260F00FF000E270F00A9 +:10009000FF000E280F00FF000E290F00FF000E2AA0 +:1000A0000F00FF000E2B0F00FF000E2C0F00FF00B3 +:1000B0000E2D0F00FF000E2E0F00FF000E2F0F0061 +:1000C000FF000E300F00FF000E310F00FF000E3258 +:1000D0000F00FF000E330F00FF000E340F00FF0073 +:1000E0000E350F00FF000E360F00FF000E370F0019 +:1000F000FF000E380F00FF000E390F00FF000E3A10 +:100100000F00FF000E3B0F00FF000E3C0F00FF0032 +:100110000E3D0F00FF000E3E0F00FF000E3F0F00D0 +:10012000FF000E400F00FF000E410F00FF000E42C7 +:100130000F00FF000E430F00FF000E440F00FF00F2 +:100140000E450F00FF000E460F00FF000E470F0088 +:10015000FF000E480F00FF000E490F00FF000E4A7F +:100160000F00FF000E4B0F00FF000E4C0F00FF00B2 +:100170000E4D0F00FF000E4E0F00FF000E4F0F0040 +:10018000FF000E500F00FF000E510F00FF000E5237 +:100190000F00FF000E530F00FF000E540F00FF0072 +:1001A0000E550F00FF000E560F00FF000E570F00F8 +:1001B000FF000E580F00FF000E590F00FF000E5AEF +:1001C0000F00FF000E5B0F00FF000E5C0F00FF0032 +:1001D0000E5D0F00FF000E5E0F00FF000E5F0F00B0 +:1001E000FF000E600F00FF000E610F00FF000E62A7 +:1001F0000F00FF000E630F00FF000E640F00FF00F2 +:100200000E650F00FF000E660F00FF000E670F0067 +:10021000FF000E680F00FF000E690F00FF000E6A5E +:100220000F00FF000E6B0F00FF000E6C0F00FF00B1 +:100230000E6D0F00FF000E6E0F00FF000E6F0F001F +:10024000FF000E700F00FF000E710F00FF000E7216 +:100250000F00FF000E730F00FF000E740F00FF0071 +:100260000E750F00FF000E760F00FF000E770F00D7 +:10027000FF000E780F00FF000E790F00FF000E7ACE +:100280000F00FF000E7B0F00FF000E7C0F00FF0031 +:100290000E7D0F00FF000E7E0F00FF000E7F0F008F +:1002A000FF000E800F00FF000E810F00FF000E8286 +:1002B0000F00FF000E830F00FF000E840F00FF00F1 +:1002C0000E850F00FF000E860F00FF000E870F0047 +:1002D000FF000E880F00FF000E890F00FF000E8A3E +:1002E0000F00FF000E8B0F00FF000E8C0F00FF00B1 +:1002F0000E8D0F00FF000E8E0F00FF000E8F0F00FF +:10030000FF000E900F00FF000E910F00FF000E92F5 +:100310000F00FF000E930F00FF000E940F00FF0070 +:100320000E950F00FF000E960F00FF000E970F00B6 +:10033000FF000E980F00FF000E990F00FF000E9AAD +:100340000F00FF000E9B0F00FF000E9C0F00FF0030 +:100350000E9D0F00FF000E9E0F00FF000E9F0F006E +:10036000FF000EA00F00FF000EA10F00FF000EA265 +:100370000F00FF000EA30F00FF000EA40F00FF00F0 +:100380000EA50F00FF000EA60F00FF000EA70F0026 +:10039000FF000EA80F00FF000EA90F00FF000EAA1D +:1003A0000F00FF000EAB0F00FF000EAC0F00FF00B0 +:1003B0000EAD0F00FF000EAE0F00FF000EAF0F00DE +:1003C000FF000EB00F00FF000EB10F00FF000EB2D5 +:1003D0000F00FF000EB30F00FF000EB40F00FF0070 +:1003E0000EB50F00FF000EB60F00FF000EB70F0096 +:1003F000FF000EB80F00FF000EB90F00FF000EBA8D +:100400000F00FF000EBB0F00FF000EBC0F00FF002F +:100410000EBD0F00FF000EBE0F00FF000EBF0F004D +:10042000FF000EC00F00FF000EC10F00FF000EC244 +:100430000F00FF000EC30F00FF000EC40F00FF00EF +:100440000EC50F00FF000EC60F00FF000EC70F0005 +:10045000FF000EC80F00FF000EC90F00FF000ECAFC +:100460000F00FF000ECB0F00FF000ECC0F00FF00AF +:100470000ECD0F00FF000ECE0F00FF000ECF0F00BD +:10048000FF000ED00F00FF000ED10F00FF000ED2B4 +:100490000F00FF000ED30F00FF000ED40F00FF006F +:1004A0000ED50F00FF000ED60F00FF000ED70F0075 +:1004B000FF000ED80F00FF000ED90F00FF000EDA6C +:1004C0000F00FF000EDB0F00FF000EDC0F00FF002F +:1004D0000EDD0F00FF000EDE0F00FF000EDF0F002D +:1004E000FF000EE00F00FF000EE10F00FF000EE224 +:1004F0000F00FF000EE30F00FF000EE40F00FF00EF +:100500000EE50F00FF000EE60F00FF000EE70F00E4 +:10051000FF000EE80F00FF000EE90F00FF000EEADB +:100520000F00FF000EEB0F00FF000EEC0F00FF00AE +:100530000EED0F00FF000EEE0F00FF000EEF0F009C +:10054000FF000EF00F00FF000EF10F00FF000EF293 +:100550000F00FF000EF30F00FF000EF40F00FF006E +:100560000EF50F00FF000EF60F00FF000EF70F0054 +:10057000FF000EF80F00FF000EF90F00FF000EFA4B +:100580000F00FF000EFB0F00FF000EFC0F00FF002E +:100590000EFD0F00FF000EFE0F00FF000EFF0F000C +:1005A000FF000E100F00FF000E110F00FF000E12D3 +:1005B0000F00FF000E130F00FF000E140F00FF00CE +:1005C0000E150F00FF000E160F00FF000E170F0094 +:1005D000FF000E180F00FF000E190F00FF000E1A8B +:1005E0000F00FF000E1B0F00FF000E1C0F00FF008E +:1005F0000E1D0F00FF000E1E0F00FF000E1F0F004C +:10060000FF000E200F00FF000E210F00FF000E2242 +:100610000F00FF000E230F00FF000E240F00FF004D +:100620000E250F00FF000E260F00FF000E270F0003 +:10063000FF000E280F00FF000E290F00FF000E2AFA +:100640000F00FF000E2B0F00FF000E2C0F00FF000D +:100650000E2D0F00FF000E2E0F00FF000E2F0F00BB +:10066000FF000E300F00FF000E310F00FF000E32B2 +:100670000F00FF000E330F00FF000E340F00FF00CD +:100680000E350F00FF000E360F00FF000E370F0073 +:10069000FF000E380F00FF000E390F00FF000E3A6A +:1006A0000F00FF000E3B0F00FF000E3C0F00FF008D +:1006B0000E3D0F00FF000E3E0F00FF000E3F0F002B +:1006C000FF000E400F00FF000E410F00FF000E4222 +:1006D0000F00FF000E430F00FF000E440F00FF004D +:1006E0000E450F00FF000E460F00FF000E470F00E3 +:1006F000FF000E480F00FF000E490F00FF000E4ADA +:100700000F00FF000E4B0F00FF000E4C0F00FF000C +:100710000E4D0F00FF000E4E0F00FF000E4F0F009A +:10072000FF000E500F00FF000E510F00FF000E5291 +:100730000F00FF000E530F00FF000E540F00FF00CC +:100740000E550F00FF000E560F00FF000E570F0052 +:10075000FF000E580F00FF000E590F00FF000E5A49 +:100760000F00FF000E5B0F00FF000E5C0F00FF008C +:100770000E5D0F00FF000E5E0F00FF000E5F0F000A +:10078000FF000E600F00FF000E610F00FF000E6201 +:100790000F00FF000E630F00FF000E640F00FF004C +:1007A0000E650F00FF000E660F00FF000E670F00C2 +:1007B000FF000E680F00FF000E690F00FF000E6AB9 +:1007C0000F00FF000E6B0F00FF000E6C0F00FF000C +:1007D0000E6D0F00FF000E6E0F00FF000E6F0F007A +:1007E000FF000E700F00FF000E710F00FF000E7271 +:1007F0000F00FF000E730F00FF000E740F00FF00CC +:100800000E750F00FF000E760F00FF000E770F0031 +:10081000FF000E780F00FF000E790F00FF000E7A28 +:100820000F00FF000E7B0F00FF000E7C0F00FF008B +:100830000E7D0F00FF000E7E0F00FF000E7F0F00E9 +:10084000FF000E800F00FF000E810F00FF000E82E0 +:100850000F00FF000E830F00FF000E840F00FF004B +:100860000E850F00FF000E860F00FF000E870F00A1 +:10087000FF000E880F00FF000E890F00FF000E8A98 +:100880000F00FF000E8B0F00FF000E8C0F00FF000B +:100890000E8D0F00FF000E8E0F00FF000E8F0F0059 +:1008A000FF000E900F00FF000E910F00FF000E9250 +:1008B0000F00FF000E930F00FF000E940F00FF00CB +:1008C0000E950F00FF000E960F00FF000E970F0011 +:1008D000FF000E980F00FF000E990F00FF000E9A08 +:1008E0000F00FF000E9B0F00FF000E9C0F00FF008B +:1008F0000E9D0F00FF000E9E0F00FF000E9F0F00C9 +:10090000FF000EA00F00FF000EA10F00FF000EA2BF +:100910000F00FF000EA30F00FF000EA40F00FF004A +:100920000EA50F00FF000EA60F00FF000EA70F0080 +:10093000FF000EA80F00FF000EA90F00FF000EAA77 +:100940000F00FF000EAB0F00FF000EAC0F00FF000A +:100950000EAD0F00FF000EAE0F00FF000EAF0F0038 +:10096000FF000EB00F00FF000EB10F00FF000EB22F +:100970000F00FF000EB30F00FF000EB40F00FF00CA +:100980000EB50F00FF000EB60F00FF000EB70F00F0 +:10099000FF000EB80F00FF000EB90F00FF000EBAE7 +:1009A0000F00FF000EBB0F00FF000EBC0F00FF008A +:1009B0000EBD0F00FF000EBE0F00FF000EBF0F00A8 +:1009C000FF000EC00F00FF000EC10F00FF000EC29F +:1009D0000F00FF000EC30F00FF000EC40F00FF004A +:1009E0000EC50F00FF000EC60F00FF000EC70F0060 +:1009F000FF000EC80F00FF000EC90F00FF000ECA57 +:100A00000F00FF000ECB0F00FF000ECC0F00FF0009 +:100A10000ECD0F00FF000ECE0F00FF000ECF0F0017 +:100A2000FF000ED00F00FF000ED10F00FF000ED20E +:100A30000F00FF000ED30F00FF000ED40F00FF00C9 +:100A40000ED50F00FF000ED60F00FF000ED70F00CF +:100A5000FF000ED80F00FF000ED90F00FF000EDAC6 +:100A60000F00FF000EDB0F00FF000EDC0F00FF0089 +:100A70000EDD0F00FF000EDE0F00FF000EDF0F0087 +:100A8000FF000EE00F00FF000EE10F00FF000EE27E +:100A90000F00FF000EE30F00FF000EE40F00FF0049 +:100AA0000EE50F00FF000EE60F00FF000EE70F003F +:100AB000FF000EE80F00FF000EE90F00FF000EEA36 +:100AC0000F00FF000EEB0F00FF000EEC0F00FF0009 +:100AD0000EED0F00FF000EEE0F00FF000EEF0F00F7 +:100AE000FF000EF00F00FF000EF10F00FF000EF2EE +:100AF0000F00FF000EF30F00FF000EF40F00FF00C9 +:100B00000EF50F00FF000EF60F00FF000EF70F00AE +:100B1000FF000EF80F00FF000EF90F00FF000EFAA5 +:100B20000F00FF000EFB0F00FF000EFC0F00FF0088 +:100B30000EFD0F00FF000EFE0F00FF000EFF0F0066 +:100B4000FF000802FF000B070A440D000C00FF0025 +:100B50000B070A420D000C00FF000B070A430D00B3 +:100B60000C00FF000B070A7C0D000C00FF000B07B8 +:100B70000A7E0D000C00FF000B070A460D000C005A +:100B8000FF000B070A490D000C00FF000B070A4786 +:100B90000D000C00FF000B070A4A0D000C00FF00BF +:100BA0000E100F00FF000E110F00FF000E120F00BD +:100BB000FF000E130F00FF000E140F00FF000E15B4 +:100BC0000F00FF000E160F00FF000E170F00FF00B2 +:100BD0000E180F00FF000E190F00FF000E1A0F0075 +:100BE000FF000E1B0F00FF000E1C0F00FF000E1D6C +:100BF0000F00FF000E1E0F00FF000E1F0F00FF0072 +:100C00000E200F00FF000E210F00FF000E220F002C +:100C1000FF000E230F00FF000E240F00FF000E2523 +:100C20000F00FF000E260F00FF000E270F00FF0031 +:100C30000E280F00FF000E290F00FF000E2A0F00E4 +:100C4000FF000E2B0F00FF000E2C0F00FF000E2DDB +:100C50000F00FF000E2E0F00FF000E2F0F00FF00F1 +:100C60000E300F00FF000E310F00FF000E320F009C +:100C7000FF000E330F00FF000E340F00FF000E3593 +:100C80000F00FF000E360F00FF000E370F00FF00B1 +:100C90000E380F00FF000E390F00FF000E3A0F0054 +:100CA000FF000E3B0F00FF000E3C0F00FF000E3D4B +:100CB0000F00FF000E3E0F00FF000E3F0F00FF0071 +:100CC0000E400F00FF000E410F00FF000E420F000C +:100CD000FF000E430F00FF000E440F00FF000E4503 +:100CE0000F00FF000E460F00FF000E470F00FF0031 +:100CF0000E480F00FF000E490F00FF000E4A0F00C4 +:100D0000FF000E4B0F00FF000E4C0F00FF000E4DBA +:100D10000F00FF000E4E0F00FF000E4F0F00FF00F0 +:100D20000E500F00FF000E510F00FF000E520F007B +:100D3000FF000E530F00FF000E540F00FF000E5572 +:100D40000F00FF000E560F00FF000E570F00FF00B0 +:100D50000E580F00FF000E590F00FF000E5A0F0033 +:100D6000FF000E5B0F00FF000E5C0F00FF000E5D2A +:100D70000F00FF000E5E0F00FF000E5F0F00FF0070 +:100D80000E600F00FF000E610F00FF000E620F00EB +:100D9000FF000E630F00FF000E640F00FF000E65E2 +:100DA0000F00FF000E660F00FF000E670F00FF0030 +:100DB0000E680F00FF000E690F00FF000E6A0F00A3 +:100DC000FF000E6B0F00FF000E6C0F00FF000E6D9A +:100DD0000F00FF000E6E0F00FF000E6F0F00FF00F0 +:100DE0000E700F00FF000E710F00FF000E720F005B +:100DF000FF000E730F00FF000E740F00FF000E7552 +:100E00000F00FF000E760F00FF000E770F00FF00AF +:100E10000E780F00FF000E790F00FF000E7A0F0012 +:100E2000FF000E7B0F00FF000E7C0F00FF000E7D09 +:100E30000F00FF000E7E0F00FF000E7F0F00FF006F +:100E40000E800F00FF000E810F00FF000E820F00CA +:100E5000FF000E830F00FF000E840F00FF000E85C1 +:100E60000F00FF000E860F00FF000E870F00FF002F +:100E70000E880F00FF000E890F00FF000E8A0F0082 +:100E8000FF000E8B0F00FF000E8C0F00FF000E8D79 +:100E90000F00FF000E8E0F00FF000E8F0F00FF00EF +:100EA0000E900F00FF000E910F00FF000E920F003A +:100EB000FF000E930F00FF000E940F00FF000E9531 +:100EC0000F00FF000E960F00FF000E970F00FF00AF +:100ED0000E980F00FF000E990F00FF000E9A0F00F2 +:100EE000FF000E9B0F00FF000E9C0F00FF000E9DE9 +:100EF0000F00FF000E9E0F00FF000E9F0F00FF006F +:100F00000EA00F00FF000EA10F00FF000EA20F00A9 +:100F1000FF000EA30F00FF000EA40F00FF000EA5A0 +:100F20000F00FF000EA60F00FF000EA70F00FF002E +:100F30000EA80F00FF000EA90F00FF000EAA0F0061 +:100F4000FF000EAB0F00FF000EAC0F00FF000EAD58 +:100F50000F00FF000EAE0F00FF000EAF0F00FF00EE +:100F60000EB00F00FF000EB10F00FF000EB20F0019 +:100F7000FF000EB30F00FF000EB40F00FF000EB510 +:100F80000F00FF000EB60F00FF000EB70F00FF00AE +:100F90000EB80F00FF000EB90F00FF000EBA0F00D1 +:100FA000FF000EBB0F00FF000EBC0F00FF000EBDC8 +:100FB0000F00FF000EBE0F00FF000EBF0F00FF006E +:100FC0000EC00F00FF000EC10F00FF000EC20F0089 +:100FD000FF000EC30F00FF000EC40F00FF000EC580 +:100FE0000F00FF000EC60F00FF000EC70F00FF002E +:100FF0000EC80F00FF000EC90F00FF000ECA0F0041 +:10100000FF000ECB0F00FF000ECC0F00FF000ECD37 +:101010000F00FF000ECE0F00FF000ECF0F00FF00ED +:101020000ED00F00FF000ED10F00FF000ED20F00F8 +:10103000FF000ED30F00FF000ED40F00FF000ED5EF +:101040000F00FF000ED60F00FF000ED70F00FF00AD +:101050000ED80F00FF000ED90F00FF000EDA0F00B0 +:10106000FF000EDB0F00FF000EDC0F00FF000EDDA7 +:101070000F00FF000EDE0F00FF000EDF0F00FF006D +:101080000EE00F00FF000EE10F00FF000EE20F0068 +:10109000FF000EE30F00FF000EE40F00FF000EE55F +:1010A0000F00FF000EE60F00FF000EE70F00FF002D +:1010B0000EE80F00FF000EE90F00FF000EEA0F0020 +:1010C000FF000EEB0F00FF000EEC0F00FF000EED17 +:1010D0000F00FF000EEE0F00FF000EEF0F00FF00ED +:1010E0000EF00F00FF000EF10F00FF000EF20F00D8 +:1010F000FF000EF30F00FF000EF40F00FF000EF5CF +:101100000F00FF000EF60F00FF000EF70F00FF00AC +:101110000EF80F00FF000EF90F00FF000EFA0F008F +:10112000FF000EFB0F00FF000EFC0F00FF000EFD86 +:101130000F00FF000EFE0F00FF000EFF0F0009055D +:101140000B000A000D010C7CFF000D000C1EFF00BF +:101150000D000C00FF000D000C00FF000D000CF551 +:10116000FF000D000C11FF000D000C20FF000D0012 +:101170000C32FF000D000C40FF000D000C13FF00AF +:101180000D000C00FF000D000C14FF000D020C768A +:10119000FF000D000C60FF000D000C80FF000D0231 +:1011A0000C00FF000D000C00FF000D000C00FF0004 +:1011B0000D020C00FF000D000C00FF000D000C00E4 +:1011C000FF000D000C00FF000D000C00FF000D00E3 +:1011D0000C00FF000D000C00FF000D000C00FF00D4 +:1011E0000D000C00FF000D000C00FF000D000C00B6 +:1011F000FF000D000C00FF000D000C00FF000D00B3 +:101200000C00FF000D000C00FF000D000C00FF00A3 +:101210000D000C00FF000D000C00FF000D000C0085 +:10122000FF000D000C00FF000D000C00FF000D0082 +:101230000C00FF000D000C00FF000D000C00FF0073 +:101240000D000C00FF000D000C00FF000D000C0055 +:10125000FF000D000C00FF000D000C00FF000D0052 +:101260000C00FF000D000C00FF000D000C00FF0043 +:101270000D000C00FF000D000C00FF000D000C0025 +:10128000FF000D000C00FF000D000C00FF000D0022 +:101290000C00FF000D000C00FF000D000C00FF0013 +:1012A0000D000C00FF000D000C00FF000D000C00F5 +:1012B000FF000D000C00FF000D000C00FF000D00F2 +:1012C0000C00FF000D000C18FF000D000C19FF00B2 +:1012D0000D010C1AFF000D010C20FF000D010C4048 +:1012E000FF000D010C17FF000D000C00FF000D01A9 +:1012F0000C80FF000D010C20FF000D000C10FF0002 +:101300000D010CA0FF000D030CD1FF000D000C001F +:10131000FF000D010CF2FF000D020C00FF000D009C +:101320000C13FF000D000C00FF000D000CF4FF007B +:101330000D020CE0FF000D000C15FF000D000C006D +:10134000FF000D000C16FF000D000C00FF000D004B +:101350000C17FF000D000C20FF000D000C00FF001B +:101360000D000C20FF000D000C50FF000D000C00C4 +:10137000FF000D000C40FF000D000C00FF000D00F1 +:101380000C71FF000D020C00FF000D000C60FF004F +:101390000D000C00FF000D000C92FF000D000C0072 +:1013A000FF000D000C80FF000D000C00FF000D0081 +:1013B0000CB3FF000D020C00FF000D000CA0FF009D +:1013C0000D000C00FF000D000CD4FF000D000C0000 +:1013D000FF000D000C40FF000D000C80FF000D0011 +:1013E0000CF5FF000D000C20FF000D000C70FF003D +:1013F0000D000CA0FF000D020C11FF000D000C16DB +:10140000FF000D000C00FF000D000C00FF000D00A0 +:101410000C00FF000D000C20FF000D020C00FF006F +:101420000D000C20FF000D000C10FF000D000C172C +:10143000FF000D000C1BFF000D000C1DFF000D0236 +:101440000CDFFF0009050B010A000D000C00FF0076 +:101450000D000C00FF000D000C00FF000D020C0041 +:10146000FF000D000C19FF000D000C1FFF000D0008 +:101470000C00FF000D000C00FF000D000C00FF0031 +:101480000D030CD8FF000D000C00FF000D020C2016 +:10149000FF000D000C19FF000D000C00FF000D00F7 +:1014A0000C00FF000D000C18FF000D010CC0FF0028 +:1014B0000D010CFAFF000D000C1AFF000D000C00CE +:1014C000FF000D000C00FF000D000C00FF000D00E0 +:1014D0000C00FF000D000C00FF000D000C00FF00D1 +:1014E0000D000C00FF000D000C00FF000D000C00B3 +:1014F000FF000D000C00FF000D000C00FF000D00B0 +:101500000C00FF000D000C00FF000D000C00FF00A0 +:101510000D000C00FF000D000C00FF000D000C0082 +:10152000FF000D000C00FF000D000C00FF000D007F +:101530000C00FF000D000C00FF000D000C00FF0070 +:101540000D000C00FF000D000C00FF000D000C0052 +:10155000FF000D000C00FF000D000C00FF000D004F +:101560000C00FF000D000C00FF000D000C00FF0040 +:101570000D000C00FF000D000C00FF000D000C0022 +:10158000FF000D000C00FF000D000C00FF000D001F +:101590000C00FF000D000C00FF000D000C00FF0010 +:1015A0000D000C00FF000D000C00FF000D000C00F2 +:1015B000FF000D000C00FF000D000C00FF000D00EF +:1015C0000C00FF000D000C00FF000D020C40FF009E +:1015D0000D020C60FF000D000C00FF000D000C0060 +:1015E000FF000D000C00FF000D020CC0FF000D02FB +:1015F0000C80FF000D000C00FF000D020CFBFF0033 +:101600000D020CA0FF000D000C00FF000D000C1BD4 +:10161000FF000D020CD7FF000D000C00FF000D02B3 +:101620000CF7FF000D030C20FF000D030C00FF0062 +:101630000D000C00FF000D000C1CFF000D030C3C06 +:10164000FF000D000C00FF000D030C3FFF000D001C +:101650000C00FF000D030CC0FF000D000C00FF008C +:101660000D030CDFFF000D000C00FF000D000C004F +:10167000FF000D030C5DFF000D000C00FF000D03CB +:101680000CC0FF000D000C00FF000D030C7DFF00DF +:101690000D000C00FF000D030CC0FF000D000C003E +:1016A000FF000D030C9EFF000D000C00FF000D035A +:1016B0000CC0FF000D000C00FF000D030CBEFF006E +:1016C0000D000C00FF000D030CC0FF000D000C000E +:1016D000FF000D000C00FF000D000C00FF000D00CE +:1016E0000C00FF000D000C1BFF000D000C00FF00A4 +:1016F0000D000C00FF000D000C00FF000D020CDBC4 +:10170000FF000D000C00FF000D020CDBFF000D00C0 +:101710000C00FF000D020CE0FF000D000C00FF00AC +:101720000D020CFBFF000D000C00FF000D020CC0B1 +:10173000FF000D020C40FF000D020CFBFF000D022C +:101740000C60FF000D000C1BFF0009050B020A00D6 +:101750000CC4FF000C00FF000C44FF000C07FF004E +:101760000C44FF000C00FF000C40FF000C25FF00A4 +:101770000C01FF000C06FF000CC4FF000C07FF006B +:101780000C40FF000C25FF000C01FF000C00FF00C7 +:101790000C46FF000C46FF000C00FF000C00FF0091 +:1017A0000C00FF000C00FF000C00FF000C00FF000D +:1017B0000C00FF000C00FF000C00FF000C00FF00FD +:1017C0000C00FF000C00FF000C00FF000C00FF00ED +:1017D0000C00FF000C00FF000C00FF000C00FF00DD +:1017E0000C00FF000C00FF000C00FF000C00FF00CD +:1017F0000C00FF000C00FF000C00FF000C00FF00BD +:101800000C00FF000C00FF000C00FF000C00FF00AC +:101810000C00FF000C00FF000C00FF000C00FF009C +:101820000C00FF000C00FF000C00FF000C00FF008C +:101830000C00FF000C00FF000C00FF000C00FF007C +:101840000C00FF000C00FF000C00FF000C00FF006C +:101850000C46FF000C07FF000C05FF000C05FF0005 +:101860000C05FF000C04FF000C07FF000C05FF0037 +:101870000C04FF000C07FF000C05FF000C44FF00E8 +:101880000C46FF000C44FF000C46FF000C46FF0016 +:101890000C07FF000C05FF000C44FF000C46FF0086 +:1018A0000C05FF000C46FF000C05FF000C46FF0076 +:1018B0000C05FF000C46FF000C05FF000C44FF0068 +:1018C0000C46FF000C05FF000C07FF000C44FF0056 +:1018D0000C46FF000C05FF000C07FF000C44FF0046 +:1018E0000C46FF000C05FF000C07FF000C44FF0036 +:1018F0000C46FF000C05FF000C07FF000C44FF0026 +:101900000C05FF000C05FF000C05FF000C44FF0058 +:101910000C05FF000C05FF000C05FF000C46FF0046 +:101920000C05FF000C46FF000C05FF000C46FF00F5 +:101930000C05FF000C46FF000C05FF000C46FF00E5 +:101940000C07FF000C46FF000C07FF000C44FF00D3 +:1019500009050B030A000C07FF000C40FF000C00F8 +:10196000FF000C00FF000C00FF000C47FF000C0004 +:10197000FF000C40FF000C00FF000C40FF000C06B5 +:10198000FF000C40FF000C00FF000C00FF000C00EB +:10199000FF000C00FF000C00FF000C00FF000C001B +:1019A000FF000C00FF000C00FF000C00FF000C000B +:1019B000FF000C00FF000C00FF000C00FF000C00FB +:1019C000FF000C00FF000C00FF000C00FF000C00EB +:1019D000FF000C00FF000C00FF000C00FF000C00DB +:1019E000FF000C00FF000C00FF000C00FF000C00CB +:1019F000FF000C00FF000C00FF000C00FF000C00BB +:101A0000FF000C00FF000C00FF000C00FF000C00AA +:101A1000FF000C00FF000C00FF000C00FF000C009A +:101A2000FF000C00FF000C00FF000C00FF000C008A +:101A3000FF000C00FF000C00FF000C00FF000C007A +:101A4000FF000C00FF000C00FF000C00FF000C006A +:101A5000FF000C00FF000C80FF000C80FF000CC09A +:101A6000FF000C00FF000C00FF000C40FF000C000A +:101A7000FF000C00FF000C00FF000C40FF000C00FA +:101A8000FF000C40FF000C00FF000C60FF000C008A +:101A9000FF000C70FF000C00FF000C40FF000C006A +:101AA000FF000C40FF000C00FF000C42FF000C0088 +:101AB000FF000C40FF000C00FF000C02FF000C00B8 +:101AC000FF000C40FF000C00FF000C00FF000C00AA +:101AD000FF000C40FF000C00FF000C00FF000C009A +:101AE000FF000C40FF000C00FF000C00FF000C008A +:101AF000FF000C40FF000C00FF000C00FF000C007A +:101B0000FF000C40FF000C00FF000C00FF000C0069 +:101B1000FF000C42FF000C00FF000C40FF000C0017 +:101B2000FF000C42FF000C00FF000C02FF000C0045 +:101B3000FF000C02FF000C00FF000C02FF000C0075 +:101B4000FF000C42FF000C00FF000CC0FF000C0067 +:101B5000FF000C40FF0009050B040A000C63FF00A6 +:101B60000C03FF000C26FF000C02FF000C2CFF00F2 +:101B70000C00FF000C24FF000C00FF000C2EFF00E7 +:101B80000C02FF000C02FF000C02FF000C00FF0023 +:101B90000C00FF000C00FF000C00FF000C00FF0019 +:101BA0000C00FF000C00FF000C00FF000C00FF0009 +:101BB0000C00FF000C00FF000C00FF000C00FF00F9 +:101BC0000C00FF000C00FF000C00FF000C00FF00E9 +:101BD0000C00FF000C00FF000C00FF000C00FF00D9 +:101BE0000C00FF000C00FF000C00FF000C00FF00C9 +:101BF0000C00FF000C00FF000C00FF000C00FF00B9 +:101C00000C00FF000C00FF000C00FF000C00FF00A8 +:101C10000C00FF000C00FF000C00FF000C00FF0098 +:101C20000C00FF000C00FF000C00FF000C00FF0088 +:101C30000C00FF000C00FF000C00FF000C00FF0078 +:101C40000C00FF000C00FF000C00FF000C00FF0068 +:101C50000C00FF000C00FF000C00FF000C00FF0058 +:101C60000C01FF000C20FF000C00FF000C60FF00C7 +:101C70000C00FF000C20FF000C00FF000C20FF00F8 +:101C80000C00FF000C20FF000C00FF000C20FF00E8 +:101C90000C00FF000C20FF000C00FF000C20FF00D8 +:101CA0000C00FF000C20FF000C00FF000C20FF00C8 +:101CB0000C00FF000C60FF000C00FF000C20FF0078 +:101CC0000C00FF000C60FF000C00FF000C20FF0068 +:101CD0000C00FF000C60FF000C00FF000C20FF0058 +:101CE0000C00FF000C60FF000C00FF000C20FF0048 +:101CF0000C00FF000C60FF000C00FF000C20FF0038 +:101D00000C00FF000C60FF000C00FF000C20FF0027 +:101D10000C00FF000C20FF000C00FF000C22FF0055 +:101D20000C02FF000C22FF000C02FF000C20FF0041 +:101D30000C00FF000C60FF000C00FF000C22FF00F5 +:101D40000C02FF000C62FF000C02FF000C20FF00E1 +:101D50000C01FF000C21FF000C01FF0009010B0624 +:101D60000A000D000C00FF000A020D000C00FF002D +:101D70000A040D000C00FF000A060D000C00FF0015 +:101D80000A080D000C00FF000A0A0D000C00FF00FD +:101D90000A0C0D000C00FF000A0E0D000C00FF00E5 +:101DA0000A100D000C00FF000A120D000C00FF00CD +:101DB0000A140D000C00FF000A160D000C00FF00B5 +:101DC0000A180D000C00FF000A1A0D000C00FF009D +:101DD0000A1C0D000C00FF000A1E0D000C00FF0085 +:101DE0000A200D000C00FF000A220D000C00FF006D +:101DF0000A240D000C00FF000A260D000C00FF0055 +:101E00000A280D000C00FF000A2A0D000C00FF003C +:101E10000A2C0D000C00FF000A2E0D000C00FF0024 +:101E20000A300D000C00FF000A320D000C00FF000C +:101E30000A340D000C00FF000A360D000C00FF00F4 +:101E40000A380D000C00FF000A3A0D000C00FF00DC +:101E50000A3C0D000C00FF000A3E0D000C00FF00C4 +:101E60000A400D000C00FF000A420D030C00FF00A9 +:101E70000A440D010C00FF000A460D0A0C21FF0068 +:101E80000A480D0D0C23FF000A4A0D230C1BFF000E +:101E90000A4C0D370C8FFF000A4E0D450C77FF00E2 +:101EA0000A500D520CE2FF000A520D1C0C92FF006A +:101EB0000A540D1C0C52FF000A560D070C00FF00BF +:101EC0000A580D2F0CC6FF000A5A0D0B0C00FF001C +:101ED0000A5C0D300C06FF000A5E0D170C00FF00B7 +:101EE0000A600D3D0CDAFF000A620D290C00FF00AC +:101EF0000A640D3E0C41FF000A660D390C00FF001C +:101F00000A680D4C0C48FF000A6A0D490C00FF00DE +:101F10000A6C0D4C0C6CFF000A6E0D110CD2FF0008 +:101F20000A700D160C0CFF000A720D000C00FF0069 +:101F30000A740D000C80FF000A760D0F0C00FF00E4 +:101F40000A780D000C80FF000A7A0D130C00FF00C8 +:101F50000A7C0D800C00FF000A7E0D800C80FF00C3 +:101F600009050B070A000D0F0CFFFF000D000C0008 +:101F7000FF000D080C00FF000D080C00FF000D0213 +:101F80000C00FF000D000C00FF000D000C00FF0016 +:101F90000D0F0CFFFF000D000C00FF000D000C00EA +:101FA000FF000D080C00FF000D080C00FF000D00E5 +:101FB0000C00FF000D0F0CFFFF000D000C00FF00D8 +:101FC0000D000C00FF000D0F0CFFFF000D0F0CFFAC +:101FD000FF000D000C00FF000D000C00FF000D00C5 +:101FE0000C00FF000D000C00FF000D000C00FF00B6 +:101FF0000D000C00FF000D000C00FF000D000C0098 +:10200000FF000D000C00FF000D000C00FF000D0094 +:102010000C00FF000D000C00FF000D000C00FF0085 +:102020000D000C00FF000D000C00FF000D000C0067 +:10203000FF000D000C00FF000D000C00FF000D0064 +:102040000C00FF000D000C00FF000D000C00FF0055 +:102050000D000C00FF000D000C00FF000D000C0037 +:10206000FF000D000C00FF000D000C00FF000D0034 +:102070000C00FF000D000C00FF000D000C00FF0025 +:102080000D000C00FF000D000C00FF000D000C0007 +:10209000FF000D000C00FF000D000C00FF000D0004 +:1020A0000C00FF000D000C00FF000D000C00FF00F5 +:1020B0000D000C00FF000D000C00FF000D000C00D7 +:1020C000FF000D000C00FF000D000C00FF000D00D4 +:1020D0000C00FF000D000C00FF000D000C00FF00C5 +:1020E0000D000C00FF000D000C00FF000D000C00A7 +:1020F000FF000D000C00FF000D000C00FF000D00A4 +:102100000C00FF000D000C00FF000D000C00FF0094 +:102110000D000C00FF000D000C00FF000D000C0076 +:10212000FF000D000C00FF000D0F0CFFFF000D0F56 +:102130000CFFFF000D0F0CFFFF000D0F0CFFFF0049 +:102140000D020CE9FF000D060C8CFF000D060C8C37 +:10215000FF000D0F0CFFFF000D1A0C75FF000D0D99 +:102160000C8BFF000D040CE9FF000D0B0C16FF009B +:102170000D1A0C38FF000D0D0CC8FF000D040C6F7C +:10218000FF000D0B0C91FF000D0F0CFFFF000D0663 +:102190000C40FF000D060C40FF000D020C8FFF00ED +:1021A0000D0F0CFFFF000D060C62FF000D060C6208 +:1021B000FF000D020C7BFF000D0F0CFFFF000D0652 +:1021C0000C97FF000D060C97FF000D020C52FF004C +:1021D0000D0F0CFFFF000D060CF6FF000D060CF6B0 +:1021E000FF000D020C19FF000D050C55FF000D0539 +:1021F0000C55FF000D050C55FF000D050C55FF009B +:102200000D050C55FF000D050C55FF000D050C5577 +:10221000FF000D050C55FF000D140CDAFF000D0D2D +:102220000C93FF000D040CDAFF000D050C93FF006A +:102230000D140CDAFF000D0D0C93FF000D040CDAE9 +:10224000FF000D050C93FF000D000C00FF000D00BA +:102250000C00FF000D000C00FF000D000C00FF0043 +:102260000D020C00FF000E010F00FF000E020F0018 +:10227000FF000E010F01FF000E020F00FF000E0114 +:102280000F02FF000E020F00FF000E010F03FF0000 +:102290000E020F00FF000E010F04FF000E020F00E0 +:1022A000FF000E010F05FF000E020F00FF000E01E0 +:1022B0000F06FF000E020F00FF000E010F07FF00C8 +:1022C0000E020F00FF000E010F08FF000E020F00AC +:1022D000FF000E010F09FF000E020F00FF000E01AC +:1022E0000F0AFF000E020F00FF000E010F0BFF0090 +:1022F0000E020F00FF000E010F0CFF000E020F0078 +:10230000FF000E010F0DFF000E020F00FF000E0177 +:102310000F0EFF000E020F00FF000E010F0FFF0057 +:102320000E020F00FF000EB00F20FF000EB10F20B5 +:10233000FF000EB20F20FF000EB30F20FF000EB4FF +:102340000F20FF000EB50F20FF000EB60F20FF007C +:102350000EB70F20FF000EB80F20FF000EB90F20A0 +:10236000FF000EBA0F20FF000EBB0F20FF000EBCB7 +:102370000F20FF000EBD0F20FF000EBE0F20FF003C +:102380000EBF0F20FF000EF00F20FF000EF10F20F8 +:10239000FF000EF20F20FF000EF30F20FF000EF4DF +:1023A0000F20FF000EF50F20FF000EF60F20FF009C +:1023B0000EF70F20FF000EF80F20FF000EF90F2080 +:1023C000FF000EFA0F20FF000EFB0F20FF000EFC97 +:1023D0000F20FF000EFD0F20FF000EFE0F20FF005C +:1023E0000EFF0F20FF000E100FFFFF000E110FFF5A +:1023F000FF000E120FFFFF000E130FFFFF000E1461 +:102400000FFFFF000E150FFFFF000E160FFFFF005E +:102410000E170FFFFF000E180FFFFF000E190FFF22 +:10242000FF000E1A0FFFFF000E1B0FFFFF000E1C18 +:102430000FFFFF000E1D0FFFFF000E1E0F40FF00DD +:102440000E1F0FFFFF000E200FFFFF000E210FFFDA +:10245000FF000E220FFFFF000E230FFFFF000E24D0 +:102460000FFFFF000E250FFFFF000E260FFFFF00DE +:102470000E270FFFFF000E280FFFFF000E290FFF92 +:10248000FF000E2A0FFFFF000E2B0FFFFF000E2C88 +:102490000FFFFF000E2D0FFFFF000E2E0F00FF009D +:1024A0000E2F0F00FF000E300F00FF000E310F0047 +:1024B000FF000E320F00FF000E330F00FF000E343E +:1024C0000F00FF000E350F00FF000E360F00FF005B +:1024D0000E370F00FF000E380F00FF000E390F00FF +:1024E000FF000E3A0F00FF000E3B0F00FF000E3CF6 +:1024F0000F00FF000E3D0F00FF000E3E0F00FF001B +:102500000E3F0F20FF000E400F00FF000E410F0096 +:10251000FF000E420F00FF000E430F00FF000E44AD +:102520000F00FF000E450F00FF000E460F00FF00DA +:102530000E470F00FF000E480F00FF000E490F006E +:10254000FF000E4A0F00FF000E4B0F00FF000E4C65 +:102550000F00FF000E4D0F00FF000E4E0F0EFF008C +:102560000E4F0F0EFF000E500F00FF000E510F0018 +:10257000FF000E520F00FF000E530F00FF000E541D +:102580000F00FF000E550F00FF000E560F00FF005A +:102590000E570F00FF000E580F00FF000E590F00DE +:1025A000FF000E5A0F00FF000E5B0F00FF000E5CD5 +:1025B0000F00FF000E5D0F00FF000E5E0F00FF001A +:1025C0000E5F0F00FF000E600F00FF000E610F0096 +:1025D000FF000E620F00FF000E630F00FF000E648D +:1025E0000F00FF000E650F00FF000E660F00FF00DA +:1025F0000E670F00FF000E680F00FF000E690F004E +:10260000FF000E6A0F00FF000E6B0F00FF000E6C44 +:102610000F40FF000E6D0F00FF000E6E0F40FF0019 +:102620000E6F0F40FF000E700FC0FF000E710FC045 +:10263000FF000E720FC0FF000E730FC0FF000E747C +:102640000FC0FF000E750FC0FF000E760FC0FF0019 +:102650000E770FC0FF000E780FC0FF000E790FC07D +:10266000FF000E7A0FC0FF000E7B0FC0FF000E7C34 +:102670000FC0FF000E7D0FC0FF000E7E0FC0FF00D9 +:102680000E7F0FC0FF000E800F00FF000E810F00B5 +:10269000FF000E820F00FF000E830F00FF000E846C +:1026A0000F00FF000E850F00FF000E860F00FF00D9 +:1026B0000E870F00FF000E880F00FF000E890F002D +:1026C000FF000E8A0F00FF000E8B0F00FF000E8C24 +:1026D0000F00FF000E8D0F00FF000E8E0F00FF0099 +:1026E0000E8F0F00FF000E900F00FF000E910F00E5 +:1026F000FF000E920F00FF000E930F00FF000E94DC +:102700000F00FF000E950F00FF000E960F00FF0058 +:102710000E970F00FF000E980F00FF000E990F009C +:10272000FF000E9A0F00FF000E9B0F00FF000E9C93 +:102730000F00FF000E9D0F00FF000E9E0F00FF0018 +:102740000E9F0F00FF000EA00F00FF000EA10F0054 +:10275000FF000EA20F00FF000EA30F00FF000EA44B +:102760000F00FF000EA50F00FF000EA60F00FF00D8 +:102770000EA70F00FF000EA80F00FF000EA90F000C +:10278000FF000EAA0F00FF000EAB0F00FF000EAC03 +:102790000F00FF000EAD0F00FF000EAE0F00FF0098 +:1027A0000EAF0F00FF000EC00F00FF000EC10F00A4 +:1027B000FF000EC20F00FF000EC30F00FF000EC48B +:1027C0000F00FF000EC50F00FF000EC60F00FF0038 +:1027D0000EC70F00FF000EC80F00FF000EC90F004C +:1027E000FF000ECA0F00FF000ECB0F00FF000ECC43 +:1027F0000F00FF000ECD0F00FF000ECE0F00FF00F8 +:102800000ECF0F00FF000ED00F00FF000ED10F0003 +:10281000FF000ED20F00FF000ED30F00FF000ED4FA +:102820000F00FF000ED50F00FF000ED60F00FF00B7 +:102830000ED70F00FF000ED80F00FF000ED90F00BB +:10284000FF000EDA0F00FF000EDB0F00FF000EDCB2 +:102850000F00FF000EDD0F00FF000EDE0F10FF0067 +:102860000EDF0F10FF000EE00F00FF000EE10F0063 +:10287000FF000EE20F00FF000EE30F00FF000EE46A +:102880000F00FF000EE50F00FF000EE60F00FF0037 +:102890000EE70F00FF000EE80F00FF000EE90F002B +:1028A000FF000EEA0F00FF000EEB0F00FF000EEC22 +:1028B0000F00FF000EED0F00FF000EEE0F00FF00F7 +:1028C0000EEF0F00FF000E010F000E020F01FF00C0 +:1028D0000E010F010E020F01FF000E010F020E028A +:1028E0000F01FF000E010F030E020F01FF000E018A +:1028F0000F040E020F01FF000E010F050E020F0163 +:10290000FF000E010F060E020F01FF000E010F0760 +:102910000E020F01FF000E010F080E020F01FF0053 +:102920000E010F090E020F01FF000E010F0A0E0229 +:102930000F01FF000E010F0B0E020F01FF000E0131 +:102940000F0C0E020F01FF000E010F0D0E020F0102 +:10295000FF000E010F0E0E020F01FF000E010F0F00 +:102960000E020F01FF0008020B070A460D000C00C3 +:10297000FF000B070A490D000C00FF000B000A4B7B +:102980000D030C11FF000B000A4D0D010C32FF006E +:102990000B070A460D000C00FF000B070A490D004B +:1029A0000C00FF000B070A400D000C00FF000B0796 +:1029B0000A410D000C00FF000B010A400D020C4003 +:1029C000FF000B010A410D020C60FF000B070A40DB +:1029D0000D000C00FF000B070A410D000C00FF006A +:1029E0000B070A470D000C00FF000B070A4A0D00F9 +:1029F0000C00FF000B000A470D010C00FF000B004C +:102A00000A4A0D010C20FF000B070A470D000C00BD +:102A1000FF000B070A4A0D000C00FF000B070A7CA1 +:102A20000D000C00FF000B070A7E0D000C00FF00DC +:102A30000B000A000D010C1CFF000B070A7C0D00A7 +:102A40000C00FF000B070A7E0D000C00FF000B07B7 +:102A50000A440D000C00FF000B000A440D010C009D +:102A6000FF000B070A440D000C00FF000B070A4291 +:102A70000D000C00FF000B070A430D000C00FF00C7 +:102A80000B000A420D010C1AFF000B000A430D0156 +:102A90000C20FF000B070A420D000C00FF000B0783 +:102AA0000A430D000C00FF000B070A400D000C004C +:102AB000FF000B070A410D000C00FF000B010A404C +:102AC0000D020C40FF000B010A410D020C60FF00DB +:102AD0000B070A400D000C00FF000B070A410D0018 +:102AE0000C00FF000B070A440D0F0CFFFF000B0743 +:102AF0000A420D000C00FF000B070A430D000C00FA +:102B0000FF000B070A400D000C00FF000B070A41F5 +:102B10000D000C00FF000B070A510D060C40FF00D2 +:102B20000B070A500D060C40FF000B070A4F0D0360 +:102B30000C81FF000B070A530D1A0C76FF000B07E0 +:102B40000A540D0D0C8BFF000B070A550D040CE900 +:102B5000FF000B070A560D0B0C17FF000B070A5757 +:102B60000D1A0C38FF000B070A580D0D0CC9FF0099 +:102B70000B070A590D040C6FFF000B070A5A0D0BC7 +:102B80000C91FF000B070A730D140CDAFF000B0702 +:102B90000A740D0D0C93FF000B070A750D040CD978 +:102BA000FF000B070A760D050C93FF000B070A7751 +:102BB0000D140CDAFF000B070A780D0D0C93FF00C3 +:102BC0000B070A790D040CD9FF000B070A7A0D05D3 +:102BD0000C93FF000B070A5E0D030C68FF000B0748 +:102BE0000A5C0D040C31FF000B070A5D0D040C316B +:102BF000FF000B070A620D030C52FF000B070A606F +:102C00000D040C76FF000B070A610D040C76FF0023 +:102C10000B070A660D030C2EFF000B070A640D0458 +:102C20000CDAFF000B070A650D040CDAFF000B0736 +:102C30000A6A0D020CF6FF000B070A680D050C620C +:102C4000FF000B070A690D050C62FF000B060A4620 +:102C50000D0A0C22FF000B060A480D0D0C24FF0084 +:102C60000B060A6E0D110CD3FF000B060A700D1532 +:102C70000CCBFF000B060A520D200C93FF000B0635 +:102C80000A540D200C54FF000B060A4A0D270C1D98 +:102C9000FF000B060A580D2F0CC8FF000B060A5C3C +:102CA0000D300C07FF000B060A4C0D370C90FF008F +:102CB0000B060A600D3D0CDBFF000B060A640D3E9F +:102CC0000C42FF000B060A4E0D450C78FF000B0668 +:102CD0000A680D4C0C48FF000B060A6C0D4C0C6C7E +:102CE000FF000B060A500D520CE2FF000B060A42D1 +:102CF0000D020CBAFF00FF000E1E0F14FF000EDEC7 +:102D00000F20FF000EDF0F20FF000B060A780D00DA +:102D10000C40FF000B070A030D0F0CFFFF000B0711 +:102D20000A0B0D0F0CFFFF000B070A020D000C0031 +:102D3000FF000B070A0A0D000C00FF000B070A46F4 +:102D40000D000C00FF000B070A490D000C000905DF +:102D50000B000A100D000C00FF000D000C00FF001E +:102D60000D020C00FF000D000C00FF000D000C0018 +:102D7000FF000D000C00FF000D000C00FF000D0017 +:102D80000C00FF000D000C00FF000D000C00FF0008 +:102D90000D000C00FF000D000C00FF000D000C00EA +:102DA000FF000D000C00FF000D000C00FF000D00E7 +:102DB0000C00FF000D000C00FF000D000C00FF00D8 +:102DC0000D000C00FF000D000C00FF000D000C00BA +:102DD000FF000D000C00FF000D000C00FF000D00B7 +:102DE0000C00FF000D000C00FF000D000C00FF00A8 +:102DF0000D000C00FF000D000C00FF000D000C008A +:102E0000FF000D000C00FF000D000C00FF000D0086 +:102E10000C00FF000D000C00FF000D000C00FF0077 +:102E20000D000C00FF000D000C00FF000D000C0059 +:102E3000FF000D000C00FF000D000C00FF000D0056 +:102E40000C00FF000D000C00FF000D000C00FF0047 +:102E50000D000C00FF000D000C00FF000D000C0029 +:102E6000FF000D000C00FF000D000C00FF000D0026 +:102E70000C00FF0009050B010A100D010CC0FF003A +:102E80000D010CFAFF000D000C1AFF000D000C00E4 +:102E9000FF000D000C00FF000D000C00FF000D00F6 +:102EA0000C00FF000D000C00FF000D000C00FF00E7 +:102EB0000D000C00FF000D000C00FF000D000C00C9 +:102EC000FF000D000C00FF000D000C00FF000D00C6 +:102ED0000C00FF000D000C00FF000D000C00FF00B7 +:102EE0000D000C00FF000D000C00FF000D000C0099 +:102EF000FF000D000C00FF000D000C00FF000D0096 +:102F00000C00FF000D000C00FF000D000C00FF0086 +:102F10000D000C00FF000D000C00FF000D000C0068 +:102F2000FF000D000C00FF000D000C00FF000D0065 +:102F30000C00FF000D000C00FF000D000C00FF0056 +:102F40000D000C00FF000D000C00FF000D000C0038 +:102F5000FF000D000C00FF000D000C00FF000D0035 +:102F60000C00FF000D000C00FF000D000C00FF0026 +:102F70000D000C00FF000D000C00FF000D000C0008 +:102F8000FF000D000C00FF000D000C00FF000D0005 +:102F90000C00FF000D000C00FF00FF00FF00090502 +:102FA0000B020A100C46FF000C46FF000C00FF004D +:102FB0000C00FF000C00FF000C00FF000C00FF00E5 +:102FC0000C00FF000C00FF000C00FF000C00FF00D5 +:102FD0000C00FF000C00FF000C00FF000C00FF00C5 +:102FE0000C00FF000C00FF000C00FF000C00FF00B5 +:102FF0000C00FF000C00FF000C00FF000C00FF00A5 +:103000000C00FF000C00FF000C00FF000C00FF0094 +:103010000C00FF000C00FF000C00FF000C00FF0084 +:103020000C00FF000C00FF000C00FF000C00FF0074 +:103030000C00FF000C00FF000C00FF000C00FF0064 +:103040000C00FF000C00FF000C00FF000C00FF0054 +:103050000C00FF000C00FF000C00FF000C00FF0044 +:103060000C00FF0009050B030A100C00FF000C0008 +:10307000FF000C00FF000C00FF000C00FF000C0024 +:10308000FF000C00FF000C00FF000C00FF000C0014 +:10309000FF000C00FF000C00FF000C00FF000C0004 +:1030A000FF000C00FF000C00FF000C00FF000C00F4 +:1030B000FF000C00FF000C00FF000C00FF000C00E4 +:1030C000FF000C00FF000C00FF000C00FF000C00D4 +:1030D000FF000C00FF000C00FF000C00FF000C00C4 +:1030E000FF000C00FF000C00FF000C00FF000C00B4 +:1030F000FF000C00FF000C00FF000C00FF000C00A4 +:10310000FF000C00FF000C00FF000C00FF000C0093 +:10311000FF000C00FF000C00FF000C00FF000C0083 +:10312000FF000C00FF000C00FF0009050B040A1053 +:103130000C00FF000C00FF000C00FF000C00FF0063 +:103140000C00FF000C00FF000C00FF000C00FF0053 +:103150000C00FF000C00FF000C00FF000C00FF0043 +:103160000C00FF000C00FF000C00FF000C00FF0033 +:103170000C00FF000C00FF000C00FF000C00FF0023 +:103180000C00FF000C00FF000C00FF000C00FF0013 +:103190000C00FF000C00FF000C00FF000C00FF0003 +:1031A0000C00FF000C00FF000C00FF000C00FF00F3 +:1031B0000C00FF000C00FF000C00FF000C00FF00E3 +:1031C0000C00FF000C00FF000C00FF000C00FF00D3 +:1031D0000C00FF000C00FF000C00FF000C00FF00C3 +:1031E0000C00FF000C00FF000C00FF000C00FF00B3 +:1031F00009010B060A100D000C00FF000A120D0059 +:103200000C00FF000A140D000C00FF000A160D0050 +:103210000C00FF000A180D000C00FF000A1A0D0038 +:103220000C00FF000A1C0D000C00FF000A1E0D0020 +:103230000C00FF000A200D000C00FF000A220D0008 +:103240000C00FF000A240D000C00FF000A260D00F0 +:103250000C00FF000A280D000C00FF000A2A0D00D8 +:103260000C00FF000A2C0D000C00FF000A2E0D00C0 +:103270000C00FF000A300D000C00FF000A320D00A8 +:103280000C00FF000A340D000C00FF000A360D0090 +:103290000C00FF000A380D000C00FF000A3A0D0078 +:1032A0000C00FF000A3C0D000C00FF000A3E0D0060 +:1032B0000C00FF0009050B070A100D0F0CFFFF00A3 +:1032C0000D0F0CFFFF000D000C00FF000D000C00A7 +:1032D000FF000D000C00FF000D000C00FF000D00B2 +:1032E0000C00FF000D000C00FF000D000C00FF00A3 +:1032F0000D000C00FF000D000C00FF000D000C0085 +:10330000FF000D000C00FF000D000C00FF000D0081 +:103310000C00FF000D000C00FF000D000C00FF0072 +:103320000D000C00FF000D000C00FF000D000C0054 +:10333000FF000D000C00FF000D000C00FF000D0051 +:103340000C00FF000D000C00FF000D000C00FF0042 +:103350000D000C00FF000D000C00FF000D000C0024 +:10336000FF000D000C00FF000D000C00FF000D0021 +:103370000C00FF000D000C00FF000D000C00FF0012 +:103380000D000C00FF000D000C00FF000D000C00F4 +:10339000FF000D000C00FF000D000C00FF000D00F1 +:1033A0000C00FF000D000C00FF000D000C00FF00E2 +:1033B0000D000C00FF000D000C00FF000D000C00C4 +:1033C000FF000D000C00FF000D000C00FF000D00C1 +:1033D0000C00FF000D000C00FF000E010F00FF00AD +:1033E0000E020F00FF000E010F01FF000E020F0082 +:1033F000FF000E010F02FF000E020F00FF000E0182 +:103400000F03FF000E020F00FF000E010F04FF006C +:103410000E020F00FF000E010F05FF000E020F004D +:10342000FF000E010F06FF000E020F00FF000E014D +:103430000F07FF000E020F00FF000EB00F20FF006D +:103440000EB10F20FF000EB20F20FF000EB30F20B1 +:10345000FF000EB40F20FF000EB50F20FF000EB6C8 +:103460000F20FF000EB70F20FF000EF00F20FF000F +:103470000EF10F20FF000EF20F20FF000EF30F20C1 +:10348000FF000EF40F20FF000EF50F20FF000EF6D8 +:103490000F20FF000EF70F20FF000E100FFFFF00A0 +:1034A0000E110FFFFF000E120FFFFF000E130FFF94 +:1034B000FF000E140FFFFF000E150FFFFF000E168A +:1034C0000FFFFF000E170FFFFF000E200FFFFF0082 +:1034D0000E210FFFFF000E220FFFFF000E230FFF34 +:1034E000FF000E240FFFFF000E250FFFFF000E262A +:1034F0000FFFFF000E270FFFFF000E300F00FF0031 +:103500000E310F00FF000E320F00FF000E330F00D0 +:10351000FF000E340F00FF000E350F00FF000E36C7 +:103520000F00FF000E370F00FF000E400F00FF00DE +:103530000E410F00FF000E420F00FF000E430F0070 +:10354000FF000E440F00FF000E450F00FF000E4667 +:103550000F00FF000E470F00FF000E500F00FF008E +:103560000E510F00FF000E520F00FF000E530F0010 +:10357000FF000E540F00FF000E550F00FF000E5607 +:103580000F00FF000E570F00FF000E600F00FF003E +:103590000E610F00FF000E620F00FF000E630F00B0 +:1035A000FF000E640F00FF000E650F00FF000E66A7 +:1035B0000F00FF000E670F00FF000E700FC0FF002E +:1035C0000E710FC0FF000E720FC0FF000E730FC010 +:1035D000FF000E740FC0FF000E750FC0FF000E76C7 +:1035E0000FC0FF000E770FC0FF000E800F00FF001E +:1035F0000E810F00FF000E820F00FF000E830F00F0 +:10360000FF000E840F00FF000E850F00FF000E86E6 +:103610000F00FF000E870F00FF000E900F00FF004D +:103620000E910F00FF000E920F00FF000E930F008F +:10363000FF000E940F00FF000E950F00FF000E9686 +:103640000F00FF000E970F00FF000EA00F00FF00FD +:103650000EA10F00FF000EA20F00FF000EA30F002F +:10366000FF000EA40F00FF000EA50F00FF000EA626 +:103670000F00FF000EA70F00FF000EC00F00FF009D +:103680000EC10F00FF000EC20F00FF000EC30F009F +:10369000FF000EC40F00FF000EC50F00FF000EC696 +:1036A0000F00FF000EC70F00FF000ED00F00FF003D +:1036B0000ED10F00FF000ED20F00FF000ED30F003F +:1036C000FF000ED40F00FF000ED50F00FF000ED636 +:1036D0000F00FF000ED70F00FF000EE00F00FF00ED +:1036E0000EE10F00FF000EE20F00FF000EE30F00DF +:1036F000FF000EE40F00FF000EE50F00FF000EE6D6 +:103700000F00FF000EE70F00FF000E010F00FF008B +:103710000E020F01FF000E010F01FF000E020F014C +:10372000FF000E010F02FF000E020F01FF000E014D +:103730000F03FF000E020F01FF000E010F04FF0038 +:103740000E020F01FF000E010F05FF000E020F0118 +:10375000FF000E010F06FF000E020F01FF000E0119 +:103760000F07FF000E020F01FF000B070A460D00B6 +:103770000C00FF000B070A490D000C00FF000B07AF +:103780000A450D0F0CFFFF000B070A480D0F0CFF39 +:10379000FF000B070A7B0D040CCCFF000B070A7D12 +:1037A0000D040CCCFF000B070A7C0D000C00FF0081 +:1037B0000B070A7E0D000C00FF000B070A460D00E8 +:1037C0000C00FF000B070A490D000C00FF000B075F +:1037D0000A470D000C00FF000B070A4A0D000C0001 +:1037E000FF000B070A4C0D000C00FF000B070A4EF0 +:1037F0000D000C00FF000B070A4C0D000C000B071E +:103800000A4E0D000C000B070A4C0D000C280B078C +:103810000A4E0D000C280B070A4C0D000C510B072B +:103820000A4E0D000C510B070A4C0D000C7A0B07C9 +:103830000A4E0D000C7A0B070A4C0D000CA30B0767 +:103840000A4E0D000CA30B070A4C0D000CCC0B0705 +:103850000A4E0D000CCC0B070A4C0D000CF50B07A3 +:103860000A4E0D000CF50B070A4C0D010C1E0B0740 +:103870000A4E0D010C1E0B070A4C0D010C470B07DD +:103880000A4E0D010C470B070A4C0D010C700B077B +:103890000A4E0D010C700B070A4C0D010C990B0719 +:1038A0000A4E0D010C990B070A4C0D010CC20B07B7 +:1038B0000A4E0D010CC20B070A4C0D010CEB0B0755 +:1038C0000A4E0D010CEB0B070A4C0D020C140B07F2 +:1038D0000A4E0D020C140B070A4C0D020C3D0B078F +:1038E0000A4E0D020C3D0B070A4C0D020C660B072D +:1038F0000A4E0D020C660B070A4C0D020C8F0B07CB +:103900000A4E0D020C8F0B070A4C0D020CB80B0768 +:103910000A4E0D020CB80B070A4C0D020CE10B0706 +:103920000A4E0D020CE10B070A4C0D030C0A0B07A3 +:103930000A4E0D030C0A0B070A4C0D030C330B0740 +:103940000A4E0D030C330B070A4C0D030C5C0B07DE +:103950000A4E0D030C5C0B070A4C0D030C850B077C +:103960000A4E0D030C850B070A4C0D030CAE0B071A +:103970000A4E0D030CAE0B070A4C0D030CD70B07B8 +:103980000A4E0D030CD70B070A4C0D040C000B0755 +:103990000A4E0D040C000B070A4C0D040C280B07F3 +:1039A0000A4E0D040C280B070A4C0D040C510B0792 +:1039B0000A4E0D040C510B070A4C0D040C7A0B0730 +:1039C0000A4E0D040C7A0B070A4C0D040CA30B07CE +:1039D0000A4E0D040CA30B070A4C0D040CCC0B076C +:1039E0000A4E0D040CCC0B070A4C0D040CF50B070A +:1039F0000A4E0D040CF50B070A4C0D050C1E0B07A7 +:103A00000A4E0D050C1E0B070A4C0D050C470B0743 +:103A10000A4E0D050C470B070A4C0D050C700B07E1 +:103A20000A4E0D050C700B070A4C0D050C990B077F +:103A30000A4E0D050C990B070A4C0D050CC20B071D +:103A40000A4E0D050CC20B070A4C0D050CEB0B07BB +:103A50000A4E0D050CEB0B070A4C0D060C140B0758 +:103A60000A4E0D060C140B070A4C0D060C3D0B07F5 +:103A70000A4E0D060C3D0B070A4C0D060C660B0793 +:103A80000A4E0D060C660B070A4C0D060C8F0B0731 +:103A90000A4E0D060C8F0B070A4C0D060CB80B07CF +:103AA0000A4E0D060CB80B070A4C0D060CE10B076D +:103AB0000A4E0D060CE10B070A4C0D070C0A0B070A +:103AC0000A4E0D070C0A0B070A4C0D070C330B07A7 +:103AD0000A4E0D070C330B070A4C0D070C5C0B0745 +:103AE0000A4E0D070C5C0B070A4C0D070C850B07E3 +:103AF0000A4E0D070C850B070A4C0D070CAE0B0781 +:103B00000A4E0D070CAE0B070A4C0D070CD70B071E +:103B10000A4E0D070CD70B070A4C0D080C000B07BB +:103B20000A4E0D080C000B070A4C0D080C280B0759 +:103B30000A4E0D080C280B070A4C0D080C510B07F8 +:103B40000A4E0D080C510B070A4C0D080C7A0B0796 +:103B50000A4E0D080C7A0B070A4C0D080CA30B0734 +:103B60000A4E0D080CA30B070A4C0D080CCC0B07D2 +:103B70000A4E0D080CCC0B070A4C0D080CF50B0770 +:103B80000A4E0D080CF50B070A4C0D090C1E0B070D +:103B90000A4E0D090C1E0B070A4C0D090C470B07AA +:103BA0000A4E0D090C470B070A4C0D090C700B0748 +:103BB0000A4E0D090C700B070A4C0D090C990B07E6 +:103BC0000A4E0D090C990B070A4C0D090CC20B0784 +:103BD0000A4E0D090CC20B070A4C0D090CEB0B0722 +:103BE0000A4E0D090CEB0B070A4C0D0A0C140B07BF +:103BF0000A4E0D0A0C140B070A4C0D0A0C3D0B075C +:103C00000A4E0D0A0C3D0B070A4C0D0A0C660B07F9 +:103C10000A4E0D0A0C660B070A4C0D0A0C8F0B0797 +:103C20000A4E0D0A0C8F0B070A4C0D0A0CB80B0735 +:103C30000A4E0D0A0CB80B070A4C0D0A0CE10B07D3 +:103C40000A4E0D0A0CE10B070A4C0D0B0C0A0B0770 +:103C50000A4E0D0B0C0A0B070A4C0D0B0C330B070D +:103C60000A4E0D0B0C330B070A4C0D0B0C5C0B07AB +:103C70000A4E0D0B0C5C0B070A4C0D0B0C850B0749 +:103C80000A4E0D0B0C850B070A4C0D0B0CAE0B07E7 +:103C90000A4E0D0B0CAE0B070A4C0D0B0CD70B0785 +:103CA0000A4E0D0B0CD70B070A4C0D0C0C000B0722 +:103CB0000A4E0D0C0C000B070A4C0D0C0C280B07C0 +:103CC0000A4E0D0C0C280B070A4C0D0C0C510B075F +:103CD0000A4E0D0C0C510B070A4C0D0C0C7A0B07FD +:103CE0000A4E0D0C0C7A0B070A4C0D0C0CA30B079B +:103CF0000A4E0D0C0CA30B070A4C0D0C0CCC0B0739 +:103D00000A4E0D0C0CCC0B070A4C0D0C0CF50B07D6 +:103D10000A4E0D0C0CF50B070A4C0D0D0C1E0B0773 +:103D20000A4E0D0D0C1E0B070A4C0D0D0C470B0710 +:103D30000A4E0D0D0C470B070A4C0D0D0C700B07AE +:103D40000A4E0D0D0C700B070A4C0D0D0C990B074C +:103D50000A4E0D0D0C990B070A4C0D0D0CC20B07EA +:103D60000A4E0D0D0CC20B070A4C0D0D0CEB0B0788 +:103D70000A4E0D0D0CEB0B070A4C0D0E0C140B0725 +:103D80000A4E0D0E0C140B070A4C0D0E0C3D0B07C2 +:103D90000A4E0D0E0C3D0B070A4C0D0E0C660B0760 +:103DA0000A4E0D0E0C660B070A4C0D0E0C8F0B07FE +:103DB0000A4E0D0E0C8F0B070A4C0D0E0CB80B079C +:103DC0000A4E0D0E0CB80B070A4C0D0E0CE10B073A +:103DD0000A4E0D0E0CE10B070A4C0D0F0C0A0B07D7 +:103DE0000A4E0D0F0C0A0B070A4C0D0F0C330B0774 +:103DF0000A4E0D0F0C330B070A4C0D0F0C5C0B0712 +:103E00000A4E0D0F0C5C0B070A4C0D0F0C850B07AF +:103E10000A4E0D0F0C850B070A4C0D0F0CAE0B074D +:103E20000A4E0D0F0CAE0B070A4C0D0F0CD70B07EB +:103E30000A4E0D0F0CD70B070A4C0D0F0CFF0B078A +:0A3E40000A4E0D0F0CFF0800FF00F2 +:00000001FF diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index c5c9a92..c6942a4 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -395,16 +395,6 @@ config SND_WAVEFRONT To compile this driver as a module, choose M here: the module will be called snd-wavefront. -config SND_WAVEFRONT_FIRMWARE_IN_KERNEL - bool "In-kernel firmware for Wavefront" - depends on SND_WAVEFRONT - default y - help - Say Y here to include the static firmware for FX DSP built in - the kernel for the Wavefront driver. If you choose N here, - you need to install the firmware files from the - alsa-firmware package. - config SND_MSND_PINNACLE tristate "Turtle Beach MultiSound Pinnacle/Fiji driver" depends on X86 && EXPERIMENTAL diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c index dfc449a..a4345fc 100644 --- a/sound/isa/wavefront/wavefront_fx.c +++ b/sound/isa/wavefront/wavefront_fx.c @@ -34,14 +34,6 @@ #define WAIT_IDLE 0xff -#ifdef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL -#include "yss225.c" -static const struct firmware yss225_registers_firmware = { - .data = (u8 *)yss225_registers, - .size = sizeof yss225_registers -}; -#endif - static int wavefront_fx_idle (snd_wavefront_t *dev) @@ -260,16 +252,12 @@ snd_wavefront_fx_start (snd_wavefront_t *dev) if (dev->fx_initialized) return 0; -#ifdef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL - firmware = &yss225_registers_firmware; -#else err = request_firmware(&firmware, "yamaha/yss225_registers.bin", dev->card->dev); if (err < 0) { err = -1; goto out; } -#endif for (i = 0; i + 1 < firmware->size; i += 2) { if (firmware->data[i] >= 8 && firmware->data[i] < 16) { @@ -292,12 +280,8 @@ snd_wavefront_fx_start (snd_wavefront_t *dev) err = 0; out: -#ifndef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL release_firmware(firmware); -#endif return err; } -#ifndef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL MODULE_FIRMWARE("yamaha/yss225_registers.bin"); -#endif diff --git a/sound/isa/wavefront/yss225.c b/sound/isa/wavefront/yss225.c deleted file mode 100644 index 9f6be3f..0000000 --- a/sound/isa/wavefront/yss225.c +++ /dev/null @@ -1,2739 +0,0 @@ -/* - * Copyright (c) 1998-2002 by Paul Davis - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* weird stuff, derived from port I/O tracing with dosemu */ - -static const struct { - unsigned char addr; - unsigned char data; -} yss225_registers[] __devinitdata = { -/* Set all bits for all channels on the MOD unit to zero */ -{ WAIT_IDLE }, { 0xe, 0x10 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x11 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x12 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x13 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x14 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x15 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x16 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x17 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x18 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x19 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x20 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x21 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x22 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x23 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x24 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x25 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x26 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x27 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x28 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x29 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x30 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x31 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x32 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x33 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x34 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x35 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x36 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x37 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x38 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x39 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x40 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x41 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x42 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x43 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x44 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x45 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x46 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x47 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x48 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x49 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x50 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x51 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x52 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x53 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x54 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x55 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x56 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x57 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x58 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x59 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x60 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x61 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x62 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x63 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x64 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x65 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x66 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x67 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x68 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x69 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x70 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x71 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x72 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x73 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x74 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x75 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x76 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x77 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x78 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x79 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x80 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x81 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x82 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x83 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x84 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x85 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x86 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x87 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x88 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x89 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x90 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x91 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x92 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x93 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x94 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x95 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x96 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x97 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x98 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x99 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xaa }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xab }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xac }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xad }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xae }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xaf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xba }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbe }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xca }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xce }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xda }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xde }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xea }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xeb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xec }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xed }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xee }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xef }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfa }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfe }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xff }, { 0xf, 0x00 }, - -/* XXX But why do this twice? */ -{ WAIT_IDLE }, { 0xe, 0x10 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x11 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x12 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x13 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x14 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x15 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x16 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x17 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x18 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x19 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x20 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x21 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x22 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x23 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x24 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x25 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x26 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x27 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x28 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x29 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x30 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x31 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x32 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x33 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x34 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x35 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x36 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x37 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x38 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x39 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x40 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x41 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x42 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x43 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x44 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x45 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x46 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x47 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x48 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x49 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x50 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x51 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x52 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x53 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x54 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x55 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x56 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x57 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x58 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x59 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x60 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x61 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x62 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x63 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x64 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x65 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x66 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x67 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x68 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x69 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x70 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x71 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x72 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x73 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x74 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x75 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x76 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x77 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x78 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x79 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x80 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x81 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x82 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x83 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x84 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x85 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x86 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x87 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x88 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x89 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x90 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x91 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x92 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x93 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x94 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x95 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x96 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x97 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x98 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x99 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xaa }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xab }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xac }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xad }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xae }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xaf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xba }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbe }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xca }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xce }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xda }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xde }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xea }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xeb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xec }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xed }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xee }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xef }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfa }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfe }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xff }, { 0xf, 0x00 }, - -/* mute on */ -{ WAIT_IDLE }, { 0x8, 0x02 }, - -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x44 }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x42 }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x43 }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x7c }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x7e }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x47 }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x4a }, { 0xd, 0x00 }, { 0xc, 0x00 }, - -/* either because of stupidity by TB's programmers, or because it - actually does something, rezero the MOD page. */ -{ WAIT_IDLE }, { 0xe, 0x10 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x11 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x12 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x13 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x14 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x15 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x16 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x17 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x18 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x19 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x1f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x20 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x21 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x22 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x23 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x24 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x25 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x26 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x27 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x28 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x29 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x2f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x30 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x31 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x32 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x33 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x34 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x35 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x36 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x37 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x38 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x39 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x3f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x40 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x41 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x42 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x43 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x44 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x45 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x46 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x47 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x48 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x49 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x4f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x50 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x51 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x52 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x53 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x54 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x55 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x56 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x57 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x58 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x59 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x5f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x60 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x61 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x62 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x63 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x64 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x65 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x66 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x67 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x68 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x69 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x6f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x70 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x71 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x72 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x73 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x74 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x75 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x76 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x77 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x78 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x79 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x7f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x80 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x81 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x82 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x83 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x84 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x85 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x86 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x87 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x88 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x89 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x8f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x90 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x91 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x92 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x93 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x94 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x95 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x96 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x97 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x98 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x99 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9a }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9b }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9c }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9d }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9e }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0x9f }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xa9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xaa }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xab }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xac }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xad }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xae }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xaf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xb9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xba }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbe }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xbf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xc9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xca }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xce }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xcf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xd9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xda }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xde }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xdf }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xe9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xea }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xeb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xec }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xed }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xee }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xef }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf0 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf1 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf2 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf3 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf4 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf5 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf6 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf7 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf8 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xf9 }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfa }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfb }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfc }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfd }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xfe }, { 0xf, 0x00 }, -{ WAIT_IDLE }, { 0xe, 0xff }, { 0xf, 0x00 }, - -/* load page zero */ -{ 0x9, 0x05 }, { 0xb, 0x00 }, { 0xa, 0x00 }, - -{ 0xd, 0x01 }, { 0xc, 0x7c }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1e }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0xf5 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x11 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x32 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x13 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x14 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x76 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x18 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x19 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0x1a }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0x17 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0x80 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x10 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0xa0 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0xd1 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0xf2 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x13 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0xf4 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xe0 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x15 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x16 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x17 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x50 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x71 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x92 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0xb3 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0xa0 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0xd4 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0xf5 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x70 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0xa0 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x11 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x16 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x10 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x17 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1b }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1d }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xdf }, { WAIT_IDLE }, - -/* Now load page one */ -{ 0x9, 0x05 }, { 0xb, 0x01 }, { 0xa, 0x00 }, - -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x19 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1f }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0xd8 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x19 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x18 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0xfa }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1a }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x80 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xfb }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xa0 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1b }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xd7 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xf7 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1c }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0x3c }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0x3f }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0xdf }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0x5d }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0x7d }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0x9e }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0xbe }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1b }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xdb }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xdb }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xe0 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xfb }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xfb }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1b }, { WAIT_IDLE }, - -{ 0x9, 0x05 }, { 0xb, 0x02 }, { 0xa, 0x00 }, - -{ 0xc, 0xc4 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x25 }, { WAIT_IDLE }, -{ 0xc, 0x01 }, { WAIT_IDLE }, -{ 0xc, 0x06 }, { WAIT_IDLE }, -{ 0xc, 0xc4 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x25 }, { WAIT_IDLE }, -{ 0xc, 0x01 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x04 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x04 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x05 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x44 }, { WAIT_IDLE }, - -{ 0x9, 0x05 }, { 0xb, 0x03 }, { 0xa, 0x00 }, - -{ 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x47 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x06 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x80 }, { WAIT_IDLE }, -{ 0xc, 0x80 }, { WAIT_IDLE }, -{ 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x70 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x42 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x42 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x42 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x42 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x40 }, { WAIT_IDLE }, - -{ 0x9, 0x05 }, { 0xb, 0x04 }, { 0xa, 0x00 }, - -{ 0xc, 0x63 }, { WAIT_IDLE }, -{ 0xc, 0x03 }, { WAIT_IDLE }, -{ 0xc, 0x26 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x2c }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x24 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x2e }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x01 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x22 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x22 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x22 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x62 }, { WAIT_IDLE }, -{ 0xc, 0x02 }, { WAIT_IDLE }, -{ 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xc, 0x01 }, { WAIT_IDLE }, -{ 0xc, 0x21 }, { WAIT_IDLE }, -{ 0xc, 0x01 }, { WAIT_IDLE }, - -/* Load memory area (page six) */ -{ 0x9, 0x01 }, { 0xb, 0x06 }, - -{ 0xa, 0x00 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x02 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x04 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x06 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x08 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x0a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x0c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x0e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x10 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x12 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x14 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x16 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x18 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x1a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x1c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x1e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x20 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x22 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x24 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x26 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x28 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x2a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x2c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x2e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x30 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x32 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x34 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x36 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x38 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x3a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x3c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x3e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x42 }, { 0xd, 0x03 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x44 }, { 0xd, 0x01 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x46 }, { 0xd, 0x0a }, { 0xc, 0x21 }, { WAIT_IDLE }, -{ 0xa, 0x48 }, { 0xd, 0x0d }, { 0xc, 0x23 }, { WAIT_IDLE }, -{ 0xa, 0x4a }, { 0xd, 0x23 }, { 0xc, 0x1b }, { WAIT_IDLE }, -{ 0xa, 0x4c }, { 0xd, 0x37 }, { 0xc, 0x8f }, { WAIT_IDLE }, -{ 0xa, 0x4e }, { 0xd, 0x45 }, { 0xc, 0x77 }, { WAIT_IDLE }, -{ 0xa, 0x50 }, { 0xd, 0x52 }, { 0xc, 0xe2 }, { WAIT_IDLE }, -{ 0xa, 0x52 }, { 0xd, 0x1c }, { 0xc, 0x92 }, { WAIT_IDLE }, -{ 0xa, 0x54 }, { 0xd, 0x1c }, { 0xc, 0x52 }, { WAIT_IDLE }, -{ 0xa, 0x56 }, { 0xd, 0x07 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x58 }, { 0xd, 0x2f }, { 0xc, 0xc6 }, { WAIT_IDLE }, -{ 0xa, 0x5a }, { 0xd, 0x0b }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x5c }, { 0xd, 0x30 }, { 0xc, 0x06 }, { WAIT_IDLE }, -{ 0xa, 0x5e }, { 0xd, 0x17 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x60 }, { 0xd, 0x3d }, { 0xc, 0xda }, { WAIT_IDLE }, -{ 0xa, 0x62 }, { 0xd, 0x29 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x64 }, { 0xd, 0x3e }, { 0xc, 0x41 }, { WAIT_IDLE }, -{ 0xa, 0x66 }, { 0xd, 0x39 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x68 }, { 0xd, 0x4c }, { 0xc, 0x48 }, { WAIT_IDLE }, -{ 0xa, 0x6a }, { 0xd, 0x49 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x6c }, { 0xd, 0x4c }, { 0xc, 0x6c }, { WAIT_IDLE }, -{ 0xa, 0x6e }, { 0xd, 0x11 }, { 0xc, 0xd2 }, { WAIT_IDLE }, -{ 0xa, 0x70 }, { 0xd, 0x16 }, { 0xc, 0x0c }, { WAIT_IDLE }, -{ 0xa, 0x72 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x74 }, { 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE }, -{ 0xa, 0x76 }, { 0xd, 0x0f }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x78 }, { 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE }, -{ 0xa, 0x7a }, { 0xd, 0x13 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x7c }, { 0xd, 0x80 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x7e }, { 0xd, 0x80 }, { 0xc, 0x80 }, { WAIT_IDLE }, - -{ 0x9, 0x05 }, { 0xb, 0x07 }, { 0xa, 0x00 }, - -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x08 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x08 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x08 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x08 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0xe9 }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0x8c }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0x8c }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x1a }, { 0xc, 0x75 }, { WAIT_IDLE }, -{ 0xd, 0x0d }, { 0xc, 0x8b }, { WAIT_IDLE }, -{ 0xd, 0x04 }, { 0xc, 0xe9 }, { WAIT_IDLE }, -{ 0xd, 0x0b }, { 0xc, 0x16 }, { WAIT_IDLE }, -{ 0xd, 0x1a }, { 0xc, 0x38 }, { WAIT_IDLE }, -{ 0xd, 0x0d }, { 0xc, 0xc8 }, { WAIT_IDLE }, -{ 0xd, 0x04 }, { 0xc, 0x6f }, { WAIT_IDLE }, -{ 0xd, 0x0b }, { 0xc, 0x91 }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x8f }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0x62 }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0x62 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x7b }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0x97 }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0x97 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x52 }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0xf6 }, { WAIT_IDLE }, -{ 0xd, 0x06 }, { 0xc, 0xf6 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x19 }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE }, -{ 0xd, 0x14 }, { 0xc, 0xda }, { WAIT_IDLE }, -{ 0xd, 0x0d }, { 0xc, 0x93 }, { WAIT_IDLE }, -{ 0xd, 0x04 }, { 0xc, 0xda }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x93 }, { WAIT_IDLE }, -{ 0xd, 0x14 }, { 0xc, 0xda }, { WAIT_IDLE }, -{ 0xd, 0x0d }, { 0xc, 0x93 }, { WAIT_IDLE }, -{ 0xd, 0x04 }, { 0xc, 0xda }, { WAIT_IDLE }, -{ 0xd, 0x05 }, { 0xc, 0x93 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, - -/* Now setup the MOD area. */ -{ 0xe, 0x01 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x02 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x03 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x04 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x05 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x06 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x07 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x08 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x09 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0a }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0b }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0c }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0d }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0e }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0f }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, - -{ 0xe, 0xb0 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb1 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb2 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb3 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb4 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb5 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb6 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb7 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb8 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb9 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xba }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xbb }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xbc }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xbd }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xbe }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xbf }, { 0xf, 0x20 }, { WAIT_IDLE }, - -{ 0xe, 0xf0 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf1 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf2 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf3 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf4 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf5 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf6 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf7 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf8 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf9 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xfa }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xfb }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xfc }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xfd }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xfe }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xff }, { 0xf, 0x20 }, { WAIT_IDLE }, - -{ 0xe, 0x10 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x11 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x12 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x13 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x14 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x15 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x16 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x17 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x18 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x19 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x1a }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x1b }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x1c }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x1d }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x1e }, { 0xf, 0x40 }, { WAIT_IDLE }, -{ 0xe, 0x1f }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x20 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x21 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x22 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x23 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x24 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x25 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x26 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x27 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x28 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x29 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x2a }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x2b }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x2c }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x2d }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x2e }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x2f }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x30 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x31 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x32 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x33 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x34 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x35 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x36 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x37 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x38 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x39 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x3a }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x3b }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x3c }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x3d }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x3e }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x3f }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0x40 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x41 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x42 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x43 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x44 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x45 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x46 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x47 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x48 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x49 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x4a }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x4b }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x4c }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x4d }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x4e }, { 0xf, 0x0e }, { WAIT_IDLE }, -{ 0xe, 0x4f }, { 0xf, 0x0e }, { WAIT_IDLE }, -{ 0xe, 0x50 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x51 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x52 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x53 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x54 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x55 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x56 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x57 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x58 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x59 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x5a }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x5b }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x5c }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x5d }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x5e }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x5f }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x60 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x61 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x62 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x63 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x64 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x65 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x66 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x67 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x68 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x69 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x6a }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x6b }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x6c }, { 0xf, 0x40 }, { WAIT_IDLE }, -{ 0xe, 0x6d }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x6e }, { 0xf, 0x40 }, { WAIT_IDLE }, -{ 0xe, 0x6f }, { 0xf, 0x40 }, { WAIT_IDLE }, -{ 0xe, 0x70 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x71 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x72 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x73 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x74 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x75 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x76 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x77 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x78 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x79 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x7a }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x7b }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x7c }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x7d }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x7e }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x7f }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x80 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x81 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x82 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x83 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x84 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x85 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x86 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x87 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x88 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x89 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x8a }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x8b }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x8c }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x8d }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x8e }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x8f }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x90 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x91 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x92 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x93 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x94 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x95 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x96 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x97 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x98 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x99 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x9a }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x9b }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x9c }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x9d }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x9e }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x9f }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa0 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa1 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa2 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa3 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa4 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa5 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa6 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa7 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa8 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa9 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xaa }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xab }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xac }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xad }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xae }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xaf }, { 0xf, 0x00 }, { WAIT_IDLE }, - -{ 0xe, 0xc0 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc1 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc2 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc3 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc4 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc5 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc6 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc7 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc8 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc9 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xca }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xcb }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xcc }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xcd }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xce }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xcf }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd0 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd1 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd2 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd3 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd4 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd5 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd6 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd7 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd8 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd9 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xda }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xdb }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xdc }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xdd }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xde }, { 0xf, 0x10 }, { WAIT_IDLE }, -{ 0xe, 0xdf }, { 0xf, 0x10 }, { WAIT_IDLE }, -{ 0xe, 0xe0 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe1 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe2 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe3 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe4 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe5 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe6 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe7 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe8 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe9 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xea }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xeb }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xec }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xed }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xee }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xef }, { 0xf, 0x00 }, { WAIT_IDLE }, - -{ 0xe, 0x01 }, { 0xf, 0x00 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x01 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x02 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x03 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x04 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x05 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x06 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x07 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x08 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x09 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0a }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0b }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0c }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0d }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0e }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x0f }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, - -/* mute on */ -{ 0x8, 0x02 }, - -/* Now set the coefficients and so forth for the programs above */ -{ 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x00 }, { 0xa, 0x4b }, { 0xd, 0x03 }, { 0xc, 0x11 }, { WAIT_IDLE }, -{ 0xb, 0x00 }, { 0xa, 0x4d }, { 0xd, 0x01 }, { 0xc, 0x32 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x01 }, { 0xa, 0x40 }, { 0xd, 0x02 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xb, 0x01 }, { 0xa, 0x41 }, { 0xd, 0x02 }, { 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x47 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x4a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x00 }, { 0xa, 0x47 }, { 0xd, 0x01 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x00 }, { 0xa, 0x4a }, { 0xd, 0x01 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x47 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x4a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x7c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x7e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x00 }, { 0xa, 0x00 }, { 0xd, 0x01 }, { 0xc, 0x1c }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x7c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x7e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x44 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x00 }, { 0xa, 0x44 }, { 0xd, 0x01 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x44 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x42 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x43 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x00 }, { 0xa, 0x42 }, { 0xd, 0x01 }, { 0xc, 0x1a }, { WAIT_IDLE }, -{ 0xb, 0x00 }, { 0xa, 0x43 }, { 0xd, 0x01 }, { 0xc, 0x20 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x42 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x43 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x01 }, { 0xa, 0x40 }, { 0xd, 0x02 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xb, 0x01 }, { 0xa, 0x41 }, { 0xd, 0x02 }, { 0xc, 0x60 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x44 }, { 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x42 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x43 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x51 }, { 0xd, 0x06 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x50 }, { 0xd, 0x06 }, { 0xc, 0x40 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x4f }, { 0xd, 0x03 }, { 0xc, 0x81 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x53 }, { 0xd, 0x1a }, { 0xc, 0x76 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x54 }, { 0xd, 0x0d }, { 0xc, 0x8b }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x55 }, { 0xd, 0x04 }, { 0xc, 0xe9 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x56 }, { 0xd, 0x0b }, { 0xc, 0x17 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x57 }, { 0xd, 0x1a }, { 0xc, 0x38 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x58 }, { 0xd, 0x0d }, { 0xc, 0xc9 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x59 }, { 0xd, 0x04 }, { 0xc, 0x6f }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x5a }, { 0xd, 0x0b }, { 0xc, 0x91 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x73 }, { 0xd, 0x14 }, { 0xc, 0xda }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x74 }, { 0xd, 0x0d }, { 0xc, 0x93 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x75 }, { 0xd, 0x04 }, { 0xc, 0xd9 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x76 }, { 0xd, 0x05 }, { 0xc, 0x93 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x77 }, { 0xd, 0x14 }, { 0xc, 0xda }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x78 }, { 0xd, 0x0d }, { 0xc, 0x93 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x79 }, { 0xd, 0x04 }, { 0xc, 0xd9 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x7a }, { 0xd, 0x05 }, { 0xc, 0x93 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x5e }, { 0xd, 0x03 }, { 0xc, 0x68 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x5c }, { 0xd, 0x04 }, { 0xc, 0x31 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x5d }, { 0xd, 0x04 }, { 0xc, 0x31 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x62 }, { 0xd, 0x03 }, { 0xc, 0x52 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x60 }, { 0xd, 0x04 }, { 0xc, 0x76 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x61 }, { 0xd, 0x04 }, { 0xc, 0x76 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x66 }, { 0xd, 0x03 }, { 0xc, 0x2e }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x64 }, { 0xd, 0x04 }, { 0xc, 0xda }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x65 }, { 0xd, 0x04 }, { 0xc, 0xda }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x6a }, { 0xd, 0x02 }, { 0xc, 0xf6 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x68 }, { 0xd, 0x05 }, { 0xc, 0x62 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x69 }, { 0xd, 0x05 }, { 0xc, 0x62 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x46 }, { 0xd, 0x0a }, { 0xc, 0x22 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x48 }, { 0xd, 0x0d }, { 0xc, 0x24 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x6e }, { 0xd, 0x11 }, { 0xc, 0xd3 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x70 }, { 0xd, 0x15 }, { 0xc, 0xcb }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x52 }, { 0xd, 0x20 }, { 0xc, 0x93 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x54 }, { 0xd, 0x20 }, { 0xc, 0x54 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x4a }, { 0xd, 0x27 }, { 0xc, 0x1d }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x58 }, { 0xd, 0x2f }, { 0xc, 0xc8 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x5c }, { 0xd, 0x30 }, { 0xc, 0x07 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x4c }, { 0xd, 0x37 }, { 0xc, 0x90 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x60 }, { 0xd, 0x3d }, { 0xc, 0xdb }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x64 }, { 0xd, 0x3e }, { 0xc, 0x42 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x4e }, { 0xd, 0x45 }, { 0xc, 0x78 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x68 }, { 0xd, 0x4c }, { 0xc, 0x48 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x6c }, { 0xd, 0x4c }, { 0xc, 0x6c }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x50 }, { 0xd, 0x52 }, { 0xc, 0xe2 }, { WAIT_IDLE }, -{ 0xb, 0x06 }, { 0xa, 0x42 }, { 0xd, 0x02 }, { 0xc, 0xba }, { WAIT_IDLE }, - -/* Some settings (?) */ -{ WAIT_IDLE }, { 0xe, 0x1e }, { 0xf, 0x14 }, -{ WAIT_IDLE }, { 0xe, 0xde }, { 0xf, 0x20 }, -{ WAIT_IDLE }, { 0xe, 0xdf }, { 0xf, 0x20 }, - -/* some more coefficients */ -{ WAIT_IDLE }, { 0xb, 0x06 }, { 0xa, 0x78 }, { 0xd, 0x00 }, { 0xc, 0x40 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x03 }, { 0xd, 0x0f }, { 0xc, 0xff }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x0b }, { 0xd, 0x0f }, { 0xc, 0xff }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x02 }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x0a }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, - -/* Now, for some strange reason, lets reload every page - and all the coefficients over again. I have *NO* idea - why this is done. I do know that no sound is produced - is this phase is omitted. */ -{ 0x9, 0x05 }, { 0xb, 0x00 }, { 0xa, 0x10 }, - -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, - -{ 0x9, 0x05 }, { 0xb, 0x01 }, { 0xa, 0x10 }, - -{ 0xd, 0x01 }, { 0xc, 0xc0 }, { WAIT_IDLE }, -{ 0xd, 0x01 }, { 0xc, 0xfa }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x1a }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, - -{ WAIT_IDLE }, { WAIT_IDLE }, - -{ 0x9, 0x05 }, { 0xb, 0x02 }, { 0xa, 0x10 }, - -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x46 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, - -{ 0x9, 0x05 }, { 0xb, 0x03 }, { 0xa, 0x10 }, - -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, - -{ 0x9, 0x05 }, { 0xb, 0x04 }, { 0xa, 0x10 }, - -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xc, 0x00 }, { WAIT_IDLE }, - -/* Page six v.2 */ -{ 0x9, 0x01 }, { 0xb, 0x06 }, - -{ 0xa, 0x10 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x12 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x14 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x16 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x18 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x1a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x1c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x1e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x20 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x22 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x24 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x26 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x28 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x2a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x2c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x2e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x30 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x32 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x34 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x36 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x38 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x3a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x3c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xa, 0x3e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, - -{ 0x9, 0x05 }, { 0xb, 0x07 }, { 0xa, 0x10 }, - -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, - -{ 0xe, 0x01 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x02 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x03 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x04 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x05 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x06 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x07 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xb0 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb1 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb2 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb3 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb4 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb5 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb6 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xb7 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf0 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf1 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf2 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf3 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf4 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf5 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf6 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0xf7 }, { 0xf, 0x20 }, { WAIT_IDLE }, -{ 0xe, 0x10 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x11 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x12 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x13 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x14 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x15 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x16 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x17 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x20 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x21 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x22 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x23 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x24 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x25 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x26 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x27 }, { 0xf, 0xff }, { WAIT_IDLE }, -{ 0xe, 0x30 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x31 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x32 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x33 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x34 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x35 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x36 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x37 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x40 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x41 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x42 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x43 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x44 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x45 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x46 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x47 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x50 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x51 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x52 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x53 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x54 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x55 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x56 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x57 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x60 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x61 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x62 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x63 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x64 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x65 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x66 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x67 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x70 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x71 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x72 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x73 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x74 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x75 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x76 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x77 }, { 0xf, 0xc0 }, { WAIT_IDLE }, -{ 0xe, 0x80 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x81 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x82 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x83 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x84 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x85 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x86 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x87 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x90 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x91 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x92 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x93 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x94 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x95 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x96 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x97 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa0 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa1 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa2 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa3 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa4 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa5 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa6 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xa7 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc0 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc1 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc2 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc3 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc4 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc5 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc6 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xc7 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd0 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd1 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd2 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd3 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd4 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd5 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd6 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xd7 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe0 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe1 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe2 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe3 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe4 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe5 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe6 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0xe7 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x00 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x02 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x03 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x04 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x05 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x06 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, -{ 0xe, 0x01 }, { 0xf, 0x07 }, { WAIT_IDLE }, -{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE }, - -{ 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x45 }, { 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x48 }, { 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x7b }, { 0xd, 0x04 }, { 0xc, 0xcc }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x7d }, { 0xd, 0x04 }, { 0xc, 0xcc }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x7c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x7e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x47 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x4a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE }, - -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x00 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x28 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x28 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x51 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x51 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x7a }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x7a }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0xa3 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0xa3 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0xcc }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0xcc }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0xf5 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0xf5 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0x1e }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0x1e }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0x47 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0x47 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0x70 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0x70 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0x99 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0x99 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0xc2 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0xc2 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0xeb }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0xeb }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0x14 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0x14 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0x3d }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0x3d }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0x66 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0x66 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0x8f }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0x8f }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0xb8 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0xb8 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0xe1 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0xe1 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0x0a }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0x0a }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0x33 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0x33 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0x5c }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0x5c }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0x85 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0x85 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0xae }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0xae }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0xd7 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0xd7 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0x00 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0x00 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0x28 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0x28 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0x51 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0x51 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0x7a }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0x7a }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0xa3 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0xa3 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0xcc }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0xcc }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0xf5 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0xf5 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0x1e }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0x1e }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0x47 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0x47 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0x70 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0x70 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0x99 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0x99 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0xc2 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0xc2 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0xeb }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0xeb }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0x14 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0x14 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0x3d }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0x3d }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0x66 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0x66 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0x8f }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0x8f }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0xb8 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0xb8 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0xe1 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0xe1 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0x0a }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0x0a }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0x33 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0x33 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0x5c }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0x5c }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0x85 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0x85 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0xae }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0xae }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0xd7 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0xd7 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0x00 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0x00 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0x28 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0x28 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0x51 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0x51 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0x7a }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0x7a }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0xa3 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0xa3 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0xcc }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0xcc }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0xf5 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0xf5 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0x1e }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0x1e }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0x47 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0x47 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0x70 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0x70 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0x99 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0x99 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0xc2 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0xc2 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0xeb }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0xeb }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0x14 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0x14 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0x3d }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0x3d }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0x66 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0x66 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0x8f }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0x8f }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0xb8 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0xb8 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0xe1 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0xe1 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0x0a }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0x0a }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0x33 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0x33 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0x5c }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0x5c }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0x85 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0x85 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0xae }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0xae }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0xd7 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0xd7 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0x00 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0x00 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0x28 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0x28 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0x51 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0x51 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0x7a }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0x7a }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0xa3 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0xa3 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0xcc }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0xcc }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0xf5 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0xf5 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0x1e }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0x1e }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0x47 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0x47 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0x70 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0x70 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0x99 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0x99 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0xc2 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0xc2 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0xeb }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0xeb }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0x14 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0x14 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0x3d }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0x3d }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0x66 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0x66 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0x8f }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0x8f }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0xb8 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0xb8 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0xe1 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0xe1 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0x0a }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0x0a }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0x33 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0x33 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0x5c }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0x5c }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0x85 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0x85 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0xae }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0xae }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0xd7 }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0xd7 }, -{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0xff }, -{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0xff }, - -/* mute off */ -{ 0x8, 0x00 }, { WAIT_IDLE } -}; -- cgit v0.10.2 From 31d3568dfeb1dfb2735f119efe5ece7c6d40969c Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Mon, 6 Apr 2009 11:21:49 -0700 Subject: Intel-IOMMU Alignment Issue in dma_pte_clear_range() This issue was pointed out by Linus. In dma_pte_clear_range() in intel-iommu.c start = PAGE_ALIGN(start); end &= PAGE_MASK; npages = (end - start) / VTD_PAGE_SIZE; In partial page case, start could be bigger than end and npages will be negative. Currently the issue doesn't show up as a real bug in because start and end have been aligned to page boundary already by all callers. So the issue has been hidden. But it is dangerous programming practice. Signed-off-by: Fenghua Yu Signed-off-by: David Woodhouse diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index dcda521..f0dade1 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -733,8 +733,8 @@ static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end) start &= (((u64)1) << addr_width) - 1; end &= (((u64)1) << addr_width) - 1; /* in case it's partial page */ - start = PAGE_ALIGN(start); - end &= PAGE_MASK; + start &= PAGE_MASK; + end = PAGE_ALIGN(end); npages = (end - start) / VTD_PAGE_SIZE; /* we don't need lock here, nobody else touches the iova range */ -- cgit v0.10.2 From 14fa86f7c7f46abc3a1c2f18d9cea859e8e700c0 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 6 Apr 2009 17:06:51 -0700 Subject: firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw Looks like we forgot to update WHENCE when we converted this driver. Signed-off-by: David Woodhouse diff --git a/firmware/WHENCE b/firmware/WHENCE index ff41dbf..afce746 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -8,6 +8,24 @@ kernel. -------------------------------------------------------------------------- +Driver: ambassador -- Madge Ambassador (Collage PCI 155 Server) ATM NIC. + +File: firmware/atmsar11.fw + +Licence: Allegedly GPLv2+, but no source visible. Marked: + + Madge Ambassador ATM Adapter microcode. + Copyright (C) 1995-1999 Madge Networks Ltd. + + This microcode data is placed under the terms of the GNU General + Public License. The GPL is contained in /usr/doc/copyright/GPL on a + Debian system and in the file COPYING in the Linux kernel source. + + We would prefer you not to distribute modified versions without + consultation and not to ask for assembly/other microcode source. + +-------------------------------------------------------------------------- + Driver: korg1212 -- Korg 1212 IO audio device File: korg/k1212.dsp -- cgit v0.10.2 From 9090589d87506c578ea1523ffd7ae7fd9424fb28 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 7 Apr 2009 10:24:29 +0800 Subject: ACPI: convert acpi_device_lock spinlock to mutex Convert acpi_device_lock to a mutex to avoid a potential race upon access to /proc/acpi/wakeup Delete the lock entirely in wakeup.c since it is not necessary (and can not sleep) Found-by: Linus Torvalds Signed-off-by: Shaohua Li Signed-off-by: Len Brown diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index 05dfdc9..d0d550d 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -343,9 +343,6 @@ acpi_system_write_alarm(struct file *file, } #endif /* HAVE_ACPI_LEGACY_ALARM */ -extern struct list_head acpi_wakeup_device_list; -extern spinlock_t acpi_device_lock; - static int acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) { @@ -353,7 +350,7 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) seq_printf(seq, "Device\tS-state\t Status Sysfs node\n"); - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); @@ -361,7 +358,6 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) if (!dev->wakeup.flags.valid) continue; - spin_unlock(&acpi_device_lock); ldev = acpi_get_physical_device(dev->handle); seq_printf(seq, "%s\t S%d\t%c%-8s ", @@ -376,9 +372,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) seq_printf(seq, "\n"); put_device(ldev); - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); return 0; } @@ -409,7 +404,7 @@ acpi_system_write_wakeup_device(struct file *file, strbuf[len] = '\0'; sscanf(strbuf, "%s", str); - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); @@ -446,7 +441,7 @@ acpi_system_write_wakeup_device(struct file *file, } } } - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); return count; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 20c23c0..e63f2fe 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -24,7 +24,7 @@ extern struct acpi_device *acpi_root; static LIST_HEAD(acpi_device_list); static LIST_HEAD(acpi_bus_id_list); -DEFINE_SPINLOCK(acpi_device_lock); +DEFINE_MUTEX(acpi_device_lock); LIST_HEAD(acpi_wakeup_device_list); struct acpi_device_bus_id{ @@ -500,7 +500,7 @@ static int acpi_device_register(struct acpi_device *device, return -ENOMEM; } - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); /* * Find suitable bus_id and instance number in acpi_bus_id_list * If failed, create one and link it into acpi_bus_id_list @@ -528,7 +528,7 @@ static int acpi_device_register(struct acpi_device *device, list_add_tail(&device->g_list, &acpi_device_list); if (device->wakeup.flags.valid) list_add_tail(&device->wakeup_list, &acpi_wakeup_device_list); - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); if (device->parent) device->dev.parent = &parent->dev; @@ -549,20 +549,20 @@ static int acpi_device_register(struct acpi_device *device, device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; end: - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); if (device->parent) { list_del(&device->node); list_del(&device->g_list); } else list_del(&device->g_list); list_del(&device->wakeup_list); - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); return result; } static void acpi_device_unregister(struct acpi_device *device, int type) { - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); if (device->parent) { list_del(&device->node); list_del(&device->g_list); @@ -570,7 +570,7 @@ static void acpi_device_unregister(struct acpi_device *device, int type) list_del(&device->g_list); list_del(&device->wakeup_list); - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); acpi_detach_data(device->handle, acpi_bus_data_handler); diff --git a/drivers/acpi/sleep.h b/drivers/acpi/sleep.h index cfaf8f5..8a8f3b3 100644 --- a/drivers/acpi/sleep.h +++ b/drivers/acpi/sleep.h @@ -5,3 +5,6 @@ extern int acpi_suspend (u32 state); extern void acpi_enable_wakeup_device_prep(u8 sleep_state); extern void acpi_enable_wakeup_device(u8 sleep_state); extern void acpi_disable_wakeup_device(u8 sleep_state); + +extern struct list_head acpi_wakeup_device_list; +extern struct mutex acpi_device_lock; diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c index 5aee8c2..88725dc 100644 --- a/drivers/acpi/wakeup.c +++ b/drivers/acpi/wakeup.c @@ -12,12 +12,14 @@ #include "internal.h" #include "sleep.h" +/* + * We didn't lock acpi_device_lock in the file, because it invokes oops in + * suspend/resume and isn't really required as this is called in S-state. At + * that time, there is no device hotplug + **/ #define _COMPONENT ACPI_SYSTEM_COMPONENT ACPI_MODULE_NAME("wakeup_devices") -extern struct list_head acpi_wakeup_device_list; -extern spinlock_t acpi_device_lock; - /** * acpi_enable_wakeup_device_prep - prepare wakeup devices * @sleep_state: ACPI state @@ -29,7 +31,6 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state) { struct list_head *node, *next; - spin_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, @@ -40,11 +41,8 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state) (sleep_state > (u32) dev->wakeup.sleep_state)) continue; - spin_unlock(&acpi_device_lock); acpi_enable_wakeup_device_power(dev, sleep_state); - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); } /** @@ -60,7 +58,6 @@ void acpi_enable_wakeup_device(u8 sleep_state) * Caution: this routine must be invoked when interrupt is disabled * Refer ACPI2.0: P212 */ - spin_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); @@ -74,22 +71,17 @@ void acpi_enable_wakeup_device(u8 sleep_state) if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { - spin_unlock(&acpi_device_lock); /* set_gpe_type will disable GPE, leave it like that */ acpi_set_gpe_type(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_TYPE_RUNTIME); - spin_lock(&acpi_device_lock); } continue; } - spin_unlock(&acpi_device_lock); if (!dev->wakeup.flags.run_wake) acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); } /** @@ -101,7 +93,6 @@ void acpi_disable_wakeup_device(u8 sleep_state) { struct list_head *node, *next; - spin_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); @@ -112,19 +103,16 @@ void acpi_disable_wakeup_device(u8 sleep_state) if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { - spin_unlock(&acpi_device_lock); acpi_set_gpe_type(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); /* Re-enable it, since set_gpe_type will disable it */ acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - spin_lock(&acpi_device_lock); } continue; } - spin_unlock(&acpi_device_lock); acpi_disable_wakeup_device_power(dev); /* Never disable run-wake GPE */ if (!dev->wakeup.flags.run_wake) { @@ -133,16 +121,14 @@ void acpi_disable_wakeup_device(u8 sleep_state) acpi_clear_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_NOT_ISR); } - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); } int __init acpi_wakeup_device_init(void) { struct list_head *node, *next; - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, @@ -150,15 +136,13 @@ int __init acpi_wakeup_device_init(void) /* In case user doesn't load button driver */ if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled) continue; - spin_unlock(&acpi_device_lock); acpi_set_gpe_type(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); dev->wakeup.state.enabled = 1; - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); return 0; } -- cgit v0.10.2 From cec20f36d6e5a10db315714c6c3da90792368382 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 6 Apr 2009 17:24:16 -0700 Subject: firmware: Remove newly-added slicoss and sxg firmware images These are available elsewhere (for example in the linux-firmware.git repository); they have no business being added to the kernel source tree. We are only putting stuff in the firmware/ directory of the kernel source when it's extracted from long-standing drivers which used to include it directly. We didn't intend to open the floodgates to including megabytes of new firmware which was previously being distributed separately. Signed-off-by: David Woodhouse diff --git a/firmware/Makefile b/firmware/Makefile index a19e579..5aadbad 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -55,12 +55,6 @@ fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \ sb16/ima_adpcm_init.csp \ sb16/ima_adpcm_playback.csp \ sb16/ima_adpcm_capture.csp -fw-shipped-$(CONFIG_SLICOSS) += slicoss/gbdownload.sys slicoss/gbrcvucode.sys \ - slicoss/oasisdbgdownload.sys \ - slicoss/oasisdownload.sys \ - slicoss/oasisrcvucode.sys -fw-shipped-$(CONFIG_SXG) += sxg/saharadownloadB.sys \ - sxg/saharadbgdownloadB.sys fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \ yamaha/ds1e_ctrl.fw fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin diff --git a/firmware/WHENCE b/firmware/WHENCE index afce746..929f9ed 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -408,59 +408,6 @@ Found in hex form in kernel source. -------------------------------------------------------------------------- -Driver: SLICOSS - Alacritech IS-NIC products - -File: slicoss/gbdownload.sys.ihex -File: slicoss/gbrcvucode.sys.ihex -File: slicoss/oasisdbgdownload.sys.ihex -File: slicoss/oasisdownload.sys.ihex -File: slicoss/oasisrcvucode.sys.ihex - -Licence: - Copyright (C) 1999-2009 Alacritech, Inc. - - as an unpublished work. This notice does not imply unrestricted or - public access to the source code from which this firmware image is - derived. Except as noted below this firmware image may not be - reproduced, used, sold or transferred to any third party without - Alacritech's prior written consent. All Rights Reserved. - - Permission is hereby granted for the distribution of this firmware - image as part of a Linux or other Open Source operating system kernel - in text or binary form as required. - - This firmware may not be modified and may only be used with - Alacritech hardware. - -Found in hex form in kernel source. - --------------------------------------------------------------------------- - -Driver: SXG - Alacritech IS-NIC products - -File: sxg/saharadownloadB.sys.ihex -File: sxg/saharadbgdownloadB.sys.ihex - -Licence: - Copyright (C) 1999-2009 Alacritech, Inc. - - as an unpublished work. This notice does not imply unrestricted or - public access to the source code from which this firmware image is - derived. Except as noted below this firmware image may not be - reproduced, used, sold or transferred to any third party without - Alacritech's prior written consent. All Rights Reserved. - - Permission is hereby granted for the distribution of this firmware - image as part of a Linux or other Open Source operating system kernel - in text or binary form as required. - - This firmware may not be modified and may only be used with - Alacritech hardware. - -Found in hex form in kernel source. - --------------------------------------------------------------------------- - Driver: cxgb3 - Chelsio Terminator 3 1G/10G Ethernet adapter File: cxgb3/t3b_psram-1.1.0.bin.ihex diff --git a/firmware/slicoss/gbdownload.sys.ihex b/firmware/slicoss/gbdownload.sys.ihex deleted file mode 100644 index dc17e63..0000000 --- a/firmware/slicoss/gbdownload.sys.ihex +++ /dev/null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diff --git a/firmware/slicoss/gbrcvucode.sys.ihex b/firmware/slicoss/gbrcvucode.sys.ihex deleted file mode 100644 index bc7a839..0000000 --- a/firmware/slicoss/gbrcvucode.sys.ihex +++ /dev/null @@ -1,162 +0,0 @@ -:10000000000200004775010004A01301001CB75B4B -:10001000093000B65F01001C00000020183B783A50 -:10002000001CA27701001C071D017018AD7BF1FFB9 -:100030001CB37BA9AA1EB47B010C1CB57B29061C32 -:1000400000005064080C315A70040C315A80040CC2 -:10005000314E90040C314AA000092555C0040C31E2 -:1000600052B000E92455C004CCB3001C1CEB2D0198 -:10007000001C065652D408079D00001C7BB70200E6 -:1000800010A00F51540906565EC004A0307403003E -:10009000AC30750300CD033A001C7BB702001C6036 -:1000A0008E5154092925750300808E5154098C30D6 -:1000B000910004471C01001CA00F5154090000646A -:1000C0000004471C65C004471C7503006C30010028 -:1000D0001C4D3402001C7BB702001CA00F515409B8 -:1000E000C88337001C800100001C0000640004A0CD -:1000F0000F505409000074C3047BFBF2001CCC3386 -:100100000D001CB47BFD031C800E505409E0FB0560 -:10011000001C0000AC0300B30F5154090000EC7048 -:10012000040000EC80040000AC93006176ADC304D1 -:10013000C08D515409E07B00C01FA0FDC50100CC5B -:100140003305001CD403003C1CD4D31B001CC0D3BB -:1001500052001C00007C13048E8E5254095B807E7A -:100160001304000000001C0000940100A00F515473 -:1001700009A00F515409C003FC7F1CA001A001007D -:100180000000A40100A00F515409C003FC031CF59A -:100190007701001C267A02061CA00F515409B30FE8 -:1001A000515409B50202001CA00F5154097A7E0275 -:1001B000001CB50202001C530F525409AF0301008A -:1001C0001C7A0E525409B50202001C000002001CE9 -:1001D000A03DAA11040000AC1104D4D352001CB5F8 -:1001E0003EB2010020FBFDFF1F802C8C0300B93ABA -:1001F0009E0100753B02001CA71C010010DB83164A -:10020000001CC71D21C104B93B8DC1048B2C01000A -:100210001C6B2C35C1040000781100CB2C79C10473 -:10022000A00F515409A00F51540954D002001C4989 -:1002300025B10100AB2C81C104A71D750300CC338F -:1002400009001CEB2D01001CEA2901001CA00F5124 -:100250005409AE0F515409A00F515409D407FC039F -:100260001C993A02001CBB3802001C003800001C1C -:100270000000FC0104DB3B7E001CC71D01001C26A6 -:100280007A16061C271D01001CB30F5154097A0E63 -:10029000525409530F5254097A0E525409530F52B3 -:1002A00054097A0E525409530F525409A00F515455 -:1002B000097A0602001C530F525409AF0301001CB7 -:1002C0007A0E525409530F5254097A0E525409535C -:1002D0000F5254097A0E525409530F5254097A0E90 -:1002E000525409003D02001C0000581200CB2C01A2 -:1002F000001C753B02001CA71C010010A67BFD051D -:100300001C000090C204A67BFD051C0000A8C204CE -:10031000CB2F05001C602C00001CC71CE90200A0AC -:100320000F515409530702001CC083F1321C000016 -:10033000600204467AE6051C7A0E525409C083F125 -:10034000321C000068020440FA15001C0000A802DC -:1003500004467AE6051CA00F515409A00F51540918 -:10036000A00F515409A00F515409B37B01C01F7451 -:100370000E505409C0039C001C8000F802000000CD -:10038000F802040000CC1205071D01001CD4D32B79 -:10039000001CD4D352001C80769D1304000000037F -:1003A00000A67BB50310C79C00001C802C00001C1D -:1003B00000007C0204000074C304AB2DF912050791 -:1003C0001DD5C2048B2D01001C692501001CA67BD4 -:1003D000B50310CB2F09001C602C00001C00006826 -:1003E0000300530F525409467AE6051C7A0E525404 -:1003F0000940FA15001C0000300304467AE6051C8B -:10040000B50F515409A00F51540973EC4A0304600D -:100410002C00001C0000480300C71C01001C000049 -:10042000481305071D01001CC0D722001C75569EED -:100430001304602C00001CE71C650304E79C00000B -:100440001CA67BB50310802C00001C0000180304C0 -:10045000000074C304B97B01001C0000ACC304CBD2 -:10046000AFFC071CCB2F01041CC79F80031C00009E -:10047000ACC304CBAFFC071CCB2F0D041CC79F8063 -:10048000031C0000ACC304CBAF00F81DCB2F010050 -:100490001DA67BB5031CC79CACC3040000AC1305B0 -:1004A000071D01001CC01DFCD308279D040400A0EB -:1004B000EE66D400FB75291404207B06001CC01CCA -:1004C0003C04000000D0D308000020F400C0EFF28C -:1004D000001C20257C140460B7F2030000002C15DA -:1004E00000CCB3FC031CCC3305021C00002CC5045B -:1004F00060B72E050400002C150400007CC404C065 -:100500001DB8F304000088C404079D00001C1B7480 -:100510001DF404A67B11041CA00F895409E07B0084 -:10052000FC1F397F02001C071DBDC304A67BCD0341 -:100530001C000088C404E01C00001C0000C403046C -:10054000CBAF00F81DCB2F01101D0000CCC3040061 -:1005500000CC0304CBAF00F81DCB2F01181DC79FA3 -:10056000000B1C0000CCC304FB7501001C071D011F -:10057000001CCCB3FC031CCC3301021C0000CCC318 -:1005800004A01C00001CA0EEC20304CBAFFC071C9F -:10059000CB2F09041CFB7501001C0000CCC304CC4C -:1005A000B3FC031CCC3301021C00002CC50400006A -:1005B000983405CCB3FC031CCC3315021C479D7446 -:1005C000C4040000984400801D9C5404871DAD04A1 -:1005D00000CE7601001CEF76BDC404A477AD2409DB -:1005E000E47601001CC47601001C0000B85404D756 -:1005F00076015018F67601001C000000301800004B -:10060000000010CC3061C504EB2D01001CEA29016B -:10061000001CC05901001CF57749C504E030FC04FA -:1006200000004CD00400204C140500000008050018 -:10063000CCB3FC031CCC3309021CEB2DD5C404CC79 -:10064000B3FC031CCC3319021CEB2DD5C404CCB372 -:10065000FC031CCC330D021CEB2DD5C404CCB3FC25 -:10066000031CCC3311021CEB2DD5C404007B00808D -:100670001CAE77610500000004C004D38B00FC1F92 -:10068000607A3C001C604CE00400C02F20051FE095 -:1006900030D004008025D00400B55BD10404692665 -:1006A00001001C6A2B01001C801D00001CA9256193 -:1006B0000500EE3000001CAF77210500B45F01405B -:1006C00018079D645504B77601001C967601001C3E -:1006D000471D01001CA433016018A42F0160186499 -:1006E000770160182477016018447701001C648842 -:1006F00003001CA43F01001CA43B01001C537B0011 -:10070000C01CD3CF1B001C534F02001CDACF00C00B -:100710001FD5570F001CD3D337001CD4530F001C18 -:10072000E02900001CF5D5CC05000000B855047781 -:100730005601001C565301001C0000001018000058 -:1007400004C004F55501001C0000D0550477560183 -:10075000001C565301001C0000001018000004C0CB -:1007600004CB2F011810CB2F011010CB2F01081034 -:10077000CB2F010810CB2F012010CB2F010010CB65 -:100780002F012810892571C20400000CC304000049 -:1007900074C304000074C304000074C30400007038 -:1007A000C20400000CC304000074C304000074C33E -:1007B00004000074C304401C6CC004401C9CC004B2 -:1007C000A77775C3040000C4C004271DF1C004004E -:1007D0000074C304000074C304000074C304000068 -:1007E00048C604000048C604000048C6040000488B -:1007F000C604000048C604000048C604000048C6FD -:1008000004000048C604000048C604000048C604AE -:10081000000048C604000048C604000048C60400A2 -:100820000048C604000048C604000048C604000092 -:1008300048C604000048C604000048C6040000483A -:10084000C604000048C604000048C604000048C6AC -:1008500004000048C604000048C604000048C6045E -:10086000000048C604000048C604000048C6040052 -:100870000048C604000048C604000048C604000042 -:1008800048C604000048C604000048C604000048EA -:10089000C604000048C604000048C604000048C65C -:1008A00004000048C604000048C604000048C6040E -:1008B000000048C604000048C604000048C6040002 -:1008C0000048C604000048C604000048C6040000F2 -:1008D00048C604000048C604000048C6040000489A -:1008E000C604000048C604000048C604000048C60C -:1008F00004000048C604000048C604000048C604BE -:10090000000048C604000048C604000048C60400B1 -:100910000048C604000048C604000048C6040000A1 -:1009200048C604000048C604000048C60400004849 -:10093000C604000048C604000048C604000048C6BB -:1009400004000048C604000048C604000048C6046D -:10095000000048C604000048C604000048C6040061 -:100960000048C604000048C604000048C604000051 -:1009700048C604000048C604000048C604000048F9 -:10098000C604000048C604000048C604000048C66B -:1009900004000048C604000048C604000048C6041D -:1009A000000048C604000048C604000048C6040011 -:1009B0000048C604000048C604000048C604000001 -:1009C00048C604000048C604000048C604000048A9 -:1009D000C604000048C604000048C604000048C61B -:1009E00004000048C604000048C604000048C604CD -:1009F000000048C604000048C604000048C60400C1 -:040A00000048C604E0 -:00000001FF diff --git a/firmware/slicoss/oasisdbgdownload.sys.ihex b/firmware/slicoss/oasisdbgdownload.sys.ihex deleted file mode 100644 index 18b376a..0000000 --- a/firmware/slicoss/oasisdbgdownload.sys.ihex +++ /dev/null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diff --git a/firmware/slicoss/oasisdownload.sys.ihex b/firmware/slicoss/oasisdownload.sys.ihex deleted file mode 100644 index 82026c2..0000000 --- a/firmware/slicoss/oasisdownload.sys.ihex +++ /dev/null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diff --git a/firmware/slicoss/oasisrcvucode.sys.ihex b/firmware/slicoss/oasisrcvucode.sys.ihex deleted file mode 100644 index 813bea4..0000000 --- a/firmware/slicoss/oasisrcvucode.sys.ihex +++ /dev/null @@ -1,162 +0,0 @@ -:10000000000200004775010004A01301001CB75B4B -:10001000093000B65F01001C00000020183B783A50 -:10002000001CA27701001C071D017018AD7BF1FFB9 -:100030001CB37BA9AA1EB47B010C1CB57B0D061C4E -:1000400000003064080C315A70040C315A80040CE2 -:10005000314E90040C314AA000092555C0040C31E2 -:1000600052B000E92455C004CCB3001C1CEB2D0198 -:10007000001C065632D408079D00001C7BB7020006 -:1000800010A00F31540906565EC004A0305403007E -:10009000AC30550300CD033A001C7BB702001C6056 -:1000A0008E3154092925550300808E3154098C3036 -:1000B000910004471C01001CA00F3154090000648A -:1000C0000004471C65C004471C5503006C30010048 -:1000D0001C4D3402001C7BB702001CA00F315409D8 -:1000E000C88337001C800100001C0000640004A0CD -:1000F0000F305409000054C3047BFBF2001CCC33C6 -:100100000D001CB47BFD031C800E305409E0FB0580 -:10011000001C00008C0300B30F3154090000EC7088 -:10012000040000EC800400008C930061768DC30411 -:10013000C08D315409E07B00C01FA0FDC50100CC7B -:100140003305001CD403003C1CD4D31B001CC0D3BB -:1001500052001C00005C13048E8E3254095B805EDA -:100160001304000000001C0000940100A00F315493 -:1001700009A00F315409C003FC7F1CA001A001009D -:100180000000A40100A00F315409C003FC031CF5BA -:100190007701001C267AE6051CA00F315409B30F25 -:1001A000315409B50202001CA00F3154097A7E02B5 -:1001B000001CB50202001C530F325409AF030100AA -:1001C0001C7A0E325409B50202001C000002001C09 -:1001D000A03DAA11040000AC1104D4D352001CB5F8 -:1001E0003EB2010020FBFDFF1F802C6C0300B93ADA -:1001F0009E0100753B02001CA71C010010DB83164A -:10020000001CC71D21C104B93B8DC1048B2C01000A -:100210001C6B2C35C1040000781100CB2C79C10473 -:10022000A00F315409A00F31540954D002001C49C9 -:1002300025B10100AB2C81C104A71D550300CC33AF -:1002400009001CEB2D01001CEA2901001CA00F3144 -:100250005409AE0F315409A00F315409D407FC03DF -:100260001C993A02001CBB3802001C003800001C1C -:100270000000FC0104DB3B7E001CC71D01001C26A6 -:100280007AFA051C271D01001CB30F3154097A0EA0 -:10029000325409530F3254097A0E325409530F3233 -:1002A00054097A0E325409530F325409A00F3154B5 -:1002B000097A0602001C530F325409AF0301001CD7 -:1002C0007A0E325409530F3254097A0E32540953BC -:1002D0000F3254097A0E325409530F3254097A0EF0 -:1002E000325409003D02001C0000581200CB2C01C2 -:1002F000001C753B02001CA71C010010CB2F050041 -:100300001C602C00001CC71CC90200A00F3154093E -:10031000530702001C467ACA051C7A0E3254094063 -:10032000FA19001C0000880204467ACA051CA00FB6 -:10033000315409A00F315409A00F315409A00F31D5 -:100340005409B37B01C01F740E305409C0039C00D4 -:100350001C8000D802000000D802040000AC120586 -:10036000071D01001CD4D32B001CD4D352001C80C9 -:10037000767D13040000E00200A67B950310C79C65 -:1003800000001C802C00001C00006C0204000054C3 -:10039000C304AB2DD91205071DB5C2048B2D010076 -:1003A0001C692501001CA67B950310CB2F09001C9E -:1003B000602C00001C0000480300530F3254094613 -:1003C0007ACA051C7A0E32540940FA19001C000042 -:1003D000100304467ACA051CB50F315409A00F3129 -:1003E000540973EC2A0304602C00001C000028034D -:1003F00000C71C01001C0000281305071D01001C7C -:10040000C0D722001C75567E1304602C00001CE728 -:100410001C450304E79C00001CA67B950310802C60 -:1004200000001C0000F80204000054C304B97B0162 -:10043000001C00008CC304CBAFFC071CCB2F0104B5 -:100440001CC79F80031C00008CC304CBAFFC071C9F -:10045000CB2F0D041CC79F80031C00008CC304CB52 -:10046000AF00F81DCB2F01001DA67B95031CC79C78 -:100470008CC30400008C1305071D01001CC01DDC8B -:10048000D308279DE40300A0EE46D400FB750914B1 -:1004900004207B06001CC01C1C04000000B0D30814 -:1004A000000000F400C0EFF2001C20255C14046082 -:1004B000B7D2030000000C1500CCB3FC031CCC33F6 -:1004C00005021C00000CC50460B70E050400000CFA -:1004D000150400005CC404C01D98F304000068C447 -:1004E00004079D00001C1B74FDF304A67BF1031C94 -:1004F000A00F695409E07B00FC1F397F02001C0734 -:100500001D9DC304A67BAD031C000068C404E01C51 -:1005100000001C0000A40304CBAF00F81DCB2F018A -:10052000101D0000ACC3040000AC0304CBAF00F806 -:100530001DCB2F01181DC79F000B1C0000ACC3046E -:10054000FB7501001C071D01001CCCB3FC031CCC77 -:100550003301021C0000ACC304A01C00001CA0EE70 -:10056000A20304CBAFFC071CCB2F09041CFB7501B5 -:10057000001C0000ACC304CCB3FC031CCC33010250 -:100580001C00000CC5040000783405CCB3FC031C2F -:10059000CC3315021C479D54C404000078440080ED -:1005A0001D7C5404871D8D0400CE7601001CEF765F -:1005B0009DC404A4778D2409E47601001CC476014F -:1005C000001C0000985404D776015018F6760100FC -:1005D0001C00000030180000000010CC3045C5049D -:1005E000EB2D01001CEA2901001CC05901001CF57B -:1005F0007729C504E030DC0400004CB00400204C36 -:10060000F404000000E80400CCB3FC031CCC330964 -:10061000021CEB2DB5C404CCB3FC031CCC33190273 -:100620001CEB2DB5C404CCB3FC031CCC330D021C55 -:10063000EB2DB5C404CCB3FC031CCC3311021CEB72 -:100640002DB5C404007B00801CAE7745050000007A -:1006500004C004D38B00FC1F607A3C001C604CC0BB -:100660000400C02F20051FE030B004008025B00436 -:1006700000B55BB10404692601001C6A2B01001C53 -:10068000801D00001CA925450500EE3000001CAFB0 -:10069000770105000000AC2404B45F014018079DF9 -:1006A000485504B77601001C967601001C471D01D1 -:1006B000001CA433016018A42F0160186477016046 -:1006C000182477016018447701001C648803001C1B -:1006D000A43F01001CA43B01001C537B00C01CD3A1 -:1006E000CF1B001C534F02001CDACF00C01FD55790 -:1006F0000F001CD3D337001CD4530F001CE029007B -:10070000001CF5D5B0050000009C5504775601008B -:100710001C565301001C0000001018000004C00407 -:10072000F55501001C0000B45504775601001C5615 -:100730005301001C0000001018000004C004CB2F5F -:10074000011810CB2F011010CB2F010810CB2F0157 -:100750000810CB2F012010CB2F012810CB2F010028 -:1007600010892561C2040000ECC204000054C304D7 -:10077000000054C304000054C304000060C204001D -:1007800000ECC204000054C304000054C304000081 -:1007900054C304401C6CC004401C9CC004A7775583 -:1007A000C3040000C4C004271DF1C004000054C3EA -:1007B00004000054C304000054C30400002CC60409 -:1007C00000002CC60400002CC60400002CC6040047 -:1007D000002CC60400002CC60400002CC604000037 -:1007E0002CC60400002CC60400002CC60400002CFB -:1007F000C60400002CC60400002CC60400002CC651 -:100800000400002CC60400002CC60400002CC60402 -:1008100000002CC60400002CC60400002CC60400F6 -:10082000002CC60400002CC60400002CC6040000E6 -:100830002CC60400002CC60400002CC60400002CAA -:10084000C60400002CC60400002CC60400002CC600 -:100850000400002CC60400002CC60400002CC604B2 -:1008600000002CC60400002CC60400002CC60400A6 -:10087000002CC60400002CC60400002CC604000096 -:100880002CC60400002CC60400002CC60400002C5A -:10089000C60400002CC60400002CC60400002CC6B0 -:1008A0000400002CC60400002CC60400002CC60462 -:1008B00000002CC60400002CC60400002CC6040056 -:1008C000002CC60400002CC60400002CC604000046 -:1008D0002CC60400002CC60400002CC60400002C0A -:1008E000C60400002CC60400002CC60400002CC660 -:1008F0000400002CC60400002CC60400002CC60412 -:1009000000002CC60400002CC60400002CC6040005 -:10091000002CC60400002CC60400002CC6040000F5 -:100920002CC60400002CC60400002CC60400002CB9 -:10093000C60400002CC60400002CC60400002CC60F -:100940000400002CC60400002CC60400002CC604C1 -:1009500000002CC60400002CC60400002CC60400B5 -:10096000002CC60400002CC60400002CC6040000A5 -:100970002CC60400002CC60400002CC60400002C69 -:10098000C60400002CC60400002CC60400002CC6BF -:100990000400002CC60400002CC60400002CC60471 -:1009A00000002CC60400002CC60400002CC6040065 -:1009B000002CC60400002CC60400002CC604000055 -:1009C0002CC60400002CC60400002CC60400002C19 -:1009D000C60400002CC60400002CC60400002CC66F -:1009E0000400002CC60400002CC60400002CC60421 -:1009F00000002CC60400002CC60400002CC6040015 -:040A0000002CC604FC -:00000001FF diff --git a/firmware/sxg/saharadbgdownloadB.sys.ihex b/firmware/sxg/saharadbgdownloadB.sys.ihex deleted file mode 100644 index e3016d3..0000000 --- a/firmware/sxg/saharadbgdownloadB.sys.ihex +++ /dev/null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diff --git a/firmware/sxg/saharadownloadB.sys.ihex b/firmware/sxg/saharadownloadB.sys.ihex deleted file mode 100644 index 0309852..0000000 --- a/firmware/sxg/saharadownloadB.sys.ihex +++ /dev/null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cgit v0.10.2 From 0f8e5c298fc801e8eca69e1409604c05d36e0cc4 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 6 Apr 2009 17:41:48 -0700 Subject: Add README.AddingFirmware file. Basically telling people not to. Signed-off-by: David Woodhouse diff --git a/firmware/README.AddingFirmware b/firmware/README.AddingFirmware new file mode 100644 index 0000000..e24cd89 --- /dev/null +++ b/firmware/README.AddingFirmware @@ -0,0 +1,34 @@ + + DO NOT ADD FIRMWARE TO THIS DIRECTORY. + ====================================== + +This directory is only here to contain firmware images extracted from old +device drivers which predate the common use of request_firmware(). + +As we update those drivers to use request_firmware() and keep a clean +separation between code and firmware, we put the extracted firmware +here. + +This directory is _NOT_ for adding arbitrary new firmware images. The +place to add those is the separate linux-firmware repository: + + git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git + +That repository contains all these firmware images which have been +extracted from older drivers, as well various new firmware images which +we were never permitted to include in a GPL'd work, but which we _have_ +been permitted to redistribute under separate cover. + +To submit firmware to that repository, please send either a git binary +diff or preferably a git pull request to: + David Woodhouse + +Your commit should include an update to the WHENCE file clearly +identifying the licence under which the firmware is available, and +that it is redistributable. If the licence is long and involved, it's +permitted to include it in a separate file and refer to it from the +WHENCE file. + +Ideally, your commit should contain a Signed-Off-By: from someone +authoritative on the licensing of the firmware in question (i.e. from +within the company that owns the code). -- cgit v0.10.2 From 13614e37e94da4606a300ee6fe25c8c4a19ee670 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 6 Apr 2009 16:01:46 +0200 Subject: ACPI: Adjust Kelvin offset to match local implementation The exact offset between Kelvin and degree Celsius is 273.15. However ACPI handles temperature values with a single decimal place. As a consequence, some implementations use an offset of 273.1 and others use an offset of 273.2. Try to find out which one is being used, to present the most accurate and visually appealing number. Tested on a Sony Vaio PGC-GR214EP (which uses 273.1) and a Lenovo Thinkpad T60p (which uses 273.2). Signed-off-by: Jean Delvare Acked-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index e8c143c..ddbb7c8 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -192,6 +192,7 @@ struct acpi_thermal { struct acpi_handle_list devices; struct thermal_zone_device *thermal_zone; int tz_enabled; + int kelvin_offset; struct mutex lock; }; @@ -581,7 +582,7 @@ static void acpi_thermal_check(void *data) } /* sys I/F for generic thermal sysfs support */ -#define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200) +#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100) static int thermal_get_temp(struct thermal_zone_device *thermal, unsigned long *temp) @@ -596,7 +597,7 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, if (result) return result; - *temp = KELVIN_TO_MILLICELSIUS(tz->temperature); + *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset); return 0; } @@ -702,7 +703,8 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, if (tz->trips.critical.flags.valid) { if (!trip) { *temp = KELVIN_TO_MILLICELSIUS( - tz->trips.critical.temperature); + tz->trips.critical.temperature, + tz->kelvin_offset); return 0; } trip--; @@ -711,7 +713,8 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, if (tz->trips.hot.flags.valid) { if (!trip) { *temp = KELVIN_TO_MILLICELSIUS( - tz->trips.hot.temperature); + tz->trips.hot.temperature, + tz->kelvin_offset); return 0; } trip--; @@ -720,7 +723,8 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, if (tz->trips.passive.flags.valid) { if (!trip) { *temp = KELVIN_TO_MILLICELSIUS( - tz->trips.passive.temperature); + tz->trips.passive.temperature, + tz->kelvin_offset); return 0; } trip--; @@ -730,7 +734,8 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, tz->trips.active[i].flags.valid; i++) { if (!trip) { *temp = KELVIN_TO_MILLICELSIUS( - tz->trips.active[i].temperature); + tz->trips.active[i].temperature, + tz->kelvin_offset); return 0; } trip--; @@ -745,7 +750,8 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal, if (tz->trips.critical.flags.valid) { *temperature = KELVIN_TO_MILLICELSIUS( - tz->trips.critical.temperature); + tz->trips.critical.temperature, + tz->kelvin_offset); return 0; } else return -EINVAL; @@ -1334,6 +1340,25 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) return 0; } +/* + * The exact offset between Kelvin and degree Celsius is 273.15. However ACPI + * handles temperature values with a single decimal place. As a consequence, + * some implementations use an offset of 273.1 and others use an offset of + * 273.2. Try to find out which one is being used, to present the most + * accurate and visually appealing number. + * + * The heuristic below should work for all ACPI thermal zones which have a + * critical trip point with a value being a multiple of 0.5 degree Celsius. + */ +static void acpi_thermal_guess_offset(struct acpi_thermal *tz) +{ + if (tz->trips.critical.flags.valid && + (tz->trips.critical.temperature % 5) == 1) + tz->kelvin_offset = 2731; + else + tz->kelvin_offset = 2732; +} + static int acpi_thermal_add(struct acpi_device *device) { int result = 0; @@ -1360,6 +1385,8 @@ static int acpi_thermal_add(struct acpi_device *device) if (result) goto free_memory; + acpi_thermal_guess_offset(tz); + result = acpi_thermal_register_thermal_zone(tz); if (result) goto free_memory; -- cgit v0.10.2 From d22616942804798105e61428afa41a9132421bb9 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Mon, 6 Apr 2009 17:16:46 +0800 Subject: ACPI: cpufreq: remove dupilcated #include Remove dupilicated #include in arch/x86/kernel/cpu/cpufreq/longhaul.c. Signed-off-by: Huang Weiyi Signed-off-by: Len Brown diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index 0bd48e6..ce2ed3e 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From a3c270561ea4455cbcea0ac2b53335655d9fc805 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Thu, 5 Mar 2009 20:15:44 +0100 Subject: NULL noise: drivers/platform/x86/panasonic-laptop.c Fix this sparse warning: drivers/platform/x86/panasonic-laptop.c:273:70: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder Signed-off-by: Len Brown diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index a5ce4bc..41cf3e7 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -271,7 +271,7 @@ static int acpi_pcc_retrieve_biosdata(struct pcc_acpi *pcc, u32 *sinf) union acpi_object *hkey = NULL; int i; - status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, 0, + status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, NULL, &buffer); if (ACPI_FAILURE(status)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, -- cgit v0.10.2 From 33b571501553ceb008c0aef8b89e932d4efda2a2 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 15 Dec 2008 22:09:26 -0500 Subject: ACPI: delete acpi_device.g_list unused Signed-off-by: Len Brown diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index e63f2fe..8ff510b 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -491,7 +491,6 @@ static int acpi_device_register(struct acpi_device *device, */ INIT_LIST_HEAD(&device->children); INIT_LIST_HEAD(&device->node); - INIT_LIST_HEAD(&device->g_list); INIT_LIST_HEAD(&device->wakeup_list); new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL); @@ -521,11 +520,9 @@ static int acpi_device_register(struct acpi_device *device, } dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); - if (device->parent) { + if (device->parent) list_add_tail(&device->node, &device->parent->children); - list_add_tail(&device->g_list, &device->parent->g_list); - } else - list_add_tail(&device->g_list, &acpi_device_list); + if (device->wakeup.flags.valid) list_add_tail(&device->wakeup_list, &acpi_wakeup_device_list); mutex_unlock(&acpi_device_lock); @@ -550,11 +547,8 @@ static int acpi_device_register(struct acpi_device *device, return 0; end: mutex_lock(&acpi_device_lock); - if (device->parent) { + if (device->parent) list_del(&device->node); - list_del(&device->g_list); - } else - list_del(&device->g_list); list_del(&device->wakeup_list); mutex_unlock(&acpi_device_lock); return result; @@ -563,11 +557,8 @@ static int acpi_device_register(struct acpi_device *device, static void acpi_device_unregister(struct acpi_device *device, int type) { mutex_lock(&acpi_device_lock); - if (device->parent) { + if (device->parent) list_del(&device->node); - list_del(&device->g_list); - } else - list_del(&device->g_list); list_del(&device->wakeup_list); mutex_unlock(&acpi_device_lock); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index a222851..c34b110 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -270,7 +270,6 @@ struct acpi_device { struct list_head children; struct list_head node; struct list_head wakeup_list; - struct list_head g_list; struct acpi_device_status status; struct acpi_device_flags flags; struct acpi_device_pnp pnp; -- cgit v0.10.2 From f7d7f866baacc283967ce82ebdfe5d2801059a11 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 6 Apr 2009 23:04:40 -0700 Subject: x86, intel-iommu: fix X2APIC && !ACPI build failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This build failure: | drivers/pci/dmar.c:47: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘dmar_tbl_size’ | drivers/pci/dmar.c:62: warning: ‘struct acpi_dmar_device_scope’ declared inside parameter list | drivers/pci/dmar.c:62: warning: its scope is only this definition or declaration, which is probably not what you want Triggers due to this commit: d0b03bd: x2apic/intr-remap: decouple interrupt remapping from x2apic Which exposed a pre-existing but dormant fragility of the 'select X86_X2APIC' it moved around and turned that fragility into a build failure. Replace it with a proper 'depends on' construct. Signed-off-by: David Woodhouse LKML-Reference: <1239084280.22733.404.camel@macbook.infradead.org> Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4b34082..bc25b9f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -252,17 +252,13 @@ config SMP config X86_X2APIC bool "Support x2apic" - depends on X86_LOCAL_APIC && X86_64 - select INTR_REMAP + depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP ---help--- This enables x2apic support on CPUs that have this feature. This allows 32-bit apic IDs (so it can support very large systems), and accesses the local apic via MSRs not via mmio. - ( On certain CPU models you may need to enable INTR_REMAP too, - to get functional x2apic mode. ) - If you don't know what to do here, say N. config SPARSE_IRQ -- cgit v0.10.2 From 7281f5dc2c9582f3efaed9b367837ca6117d7b7f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 6 Apr 2009 15:25:52 -0500 Subject: powerpc: Fix tlbilx opcode The tlbilx opcode was not matching the Power ISA 2.06 arch spec. The old opcode was an early suggested opcode that changed during the 2.06 architecture process. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index f4a4db8..640ccbb 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -43,7 +43,7 @@ #define PPC_INST_STSWI 0x7c0005aa #define PPC_INST_STSWX 0x7c00052a -#define PPC_INST_TLBILX 0x7c000626 +#define PPC_INST_TLBILX 0x7c000024 #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ -- cgit v0.10.2 From e9965577406a2148ade97b5e0ce7c448b4ba4ef6 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 6 Apr 2009 23:36:50 -0500 Subject: powerpc: Add support for early tlbilx opcode During the ISA 2.06 development the opcode for tlbilx changed and some early implementations used to old opcode. Add support for a MMU_FTR fixup to deal with this. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index cbf1543..86d2366 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -52,6 +52,12 @@ */ #define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000) +/* This indicates that the processor uses the wrong opcode for tlbilx + * instructions. During the ISA 2.06 development the opcode for tlbilx + * changed and some early implementations used to old opcode + */ +#define MMU_FTR_TLBILX_EARLY_OPCODE ASM_CONST(0x00400000) + #ifndef __ASSEMBLY__ #include diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 640ccbb..ef4da37 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -44,6 +44,7 @@ #define PPC_INST_STSWI 0x7c0005aa #define PPC_INST_STSWX 0x7c00052a #define PPC_INST_TLBILX 0x7c000024 +#define PPC_INST_TLBILX_EARLY 0x7c000626 #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ @@ -63,10 +64,18 @@ #define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI) #define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI) #define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \ - __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b)) + __PPC_T_TLB(t) | \ + __PPC_RA(a) | __PPC_RB(b)) #define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b) #define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b) #define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b) + +#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \ + __PPC_T_TLB(t) | \ + __PPC_RA(a) | __PPC_RB(b)) +#define PPC_TLBILX_ALL_EARLY(a, b) PPC_TLBILX_EARLY(0, a, b) +#define PPC_TLBILX_PID_EARLY(a, b) PPC_TLBILX_EARLY(1, a, b) +#define PPC_TLBILX_VA_EARLY(a, b) PPC_TLBILX_EARLY(3, a, b) #define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \ __PPC_WC(w)) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index cd1b687..57db50f 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1766,7 +1766,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_features = CPU_FTRS_E500MC, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | - MMU_FTR_USE_TLBILX, + MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE, .icache_bsize = 64, .dcache_bsize = 64, .num_pmcs = 4, diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 788b87c..45fed36 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -138,7 +138,11 @@ BEGIN_MMU_FTR_SECTION andi. r3,r3,MMUCSR0_TLBFI@l bne 1b MMU_FTR_SECTION_ELSE - PPC_TLBILX_ALL(0,0) + BEGIN_MMU_FTR_SECTION_NESTED(96) + PPC_TLBILX_ALL(0,r3) + MMU_FTR_SECTION_ELSE_NESTED(96) + PPC_TLBILX_ALL_EARLY(0,r3) + ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync @@ -151,7 +155,11 @@ BEGIN_MMU_FTR_SECTION wrteei 0 mfspr r4,SPRN_MAS6 /* save MAS6 */ mtspr SPRN_MAS6,r3 + BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_PID(0,0) + MMU_FTR_SECTION_ELSE_NESTED(96) + PPC_TLBILX_PID_EARLY(0,0) + ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) mtspr SPRN_MAS6,r4 /* restore MAS6 */ wrtee r10 MMU_FTR_SECTION_ELSE @@ -185,7 +193,11 @@ BEGIN_MMU_FTR_SECTION mtspr SPRN_MAS1,r4 tlbwe MMU_FTR_SECTION_ELSE + BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_VA(0,r3) + MMU_FTR_SECTION_ELSE_NESTED(96) + PPC_TLBILX_VA_EARLY(0,r3) + ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync -- cgit v0.10.2 From 6467cae318ba8adaab37a82e8dd8af60ca9ed6e4 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Mon, 16 Mar 2009 09:56:26 +0100 Subject: powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes Commit 0f73a449a649acfca91404a98a35353a618b9555 added I2C device nodes for the LM75 thermal sensor on the TQM85xx modules, unfortunately with the wrong I2C address. The LM75s are located at address 0x48. Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index 231bae7..b6f1fc6 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -84,9 +84,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index 4356a1f..fa6a3d5 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -83,9 +83,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 28b1a95..a423042 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -85,9 +85,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 826fb62..6734ddd 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -85,9 +85,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index 06d366e..6a99f1e 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -83,9 +83,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index feff915..b6c2d71 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -85,9 +85,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { -- cgit v0.10.2 From 655544c69c8d8bdc0c377ad1d30d147a5a28a1fb Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Mon, 16 Mar 2009 09:57:17 +0100 Subject: powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3 For enet2 and enet3 the wrong phy-handles have been used in DTS files of the TQM8548 modules. Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index a423042..5b669ea 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -247,7 +247,7 @@ interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; - phy-handle = <&phy3>; + phy-handle = <&phy4>; mdio@520 { #address-cells = <1>; @@ -275,7 +275,7 @@ interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; - phy-handle = <&phy4>; + phy-handle = <&phy5>; mdio@520 { #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 6734ddd..61437bf 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -247,7 +247,7 @@ interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; - phy-handle = <&phy3>; + phy-handle = <&phy4>; mdio@520 { #address-cells = <1>; @@ -275,7 +275,7 @@ interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; - phy-handle = <&phy4>; + phy-handle = <&phy5>; mdio@520 { #address-cells = <1>; -- cgit v0.10.2 From 54ca40dcb5b956c30495e8c7b73c9ad636fb58bd Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Mon, 16 Mar 2009 09:57:59 +0100 Subject: powerpc/85xx: TQM8548: update defconfig Enable highmem support for the TQM8548-AG modules and NAND support for the TQM8548-BE modules. Furthermore disable USB, Wireless and IDE support because it's not available on the STK85xx starter kit. Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 0bc4597..43030fe 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:20 2009 +# Linux kernel version: 2.6.29-rc7 +# Mon Mar 16 09:03:28 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -75,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -152,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -202,7 +207,7 @@ CONFIG_MPIC=y # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -244,6 +249,7 @@ CONFIG_UNEVICTABLE_LRU=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,6 +265,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_FSL_LBC=y CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y @@ -284,10 +291,11 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y @@ -363,12 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set +# CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -471,27 +474,18 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_NAND_FSL_ELBC is not set -# CONFIG_MTD_NAND_FSL_UPM is not set +CONFIG_MTD_NAND_FSL_UPM=y # CONFIG_MTD_ONENAND is not set # # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images # -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_RESERVE=1 -# CONFIG_MTD_UBI_GLUEBI is not set - -# -# UBI debugging options -# -# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set @@ -515,69 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y -CONFIG_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -CONFIG_IDE_TIMINGS=y -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -# CONFIG_IDE_GD_ATAPI is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -# CONFIG_BLK_DEV_PLATFORM is not set -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT8172 is not set -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SL82C105 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_BLK_DEV_TC86C001 is not set -CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDE is not set # # SCSI device support @@ -650,7 +596,7 @@ CONFIG_MII=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set -CONFIG_E1000=y +# CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -668,6 +614,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -835,8 +782,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -975,26 +920,7 @@ CONFIG_HID=y # Special HID drivers # CONFIG_HID_COMPAT=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# +# CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1064,16 +990,9 @@ CONFIG_RTC_DRV_DS1307=y # # File systems # -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1122,8 +1041,17 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_UBIFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1184,6 +1112,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -1219,6 +1149,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set @@ -1236,6 +1167,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -- cgit v0.10.2 From 77d05632baee21b1cef8730d7c06aa69601e4dca Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 7 Apr 2009 08:55:36 +0200 Subject: softlockup: make DETECT_HUNG_TASK default depend on DETECT_SOFTLOCKUP Don't offer a default-y option when the user has turned off CONFIG_DETECT_SOFTLOCKUP already. Do offer it as 'y' only if DETECT_SOFTLOCKUP is on already. This makes it match previous behavior - where the hung-task check was embedded i CONFIG_DETECT_SOFTLOCKUP code. Cc: Linus Torvalds Signed-off-by: Ingo Molnar diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 4934eaa..898e07c 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -189,7 +189,7 @@ config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE config DETECT_HUNG_TASK bool "Detect Hung Tasks" depends on DEBUG_KERNEL - default y + default DETECT_SOFTLOCKUP help Say Y here to enable the kernel to detect "hung tasks", which are bugs that cause the task to be stuck in -- cgit v0.10.2 From 301fd748e2c81e78e74edbc694a64caa7b95dda2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 3 Apr 2009 11:12:23 -0400 Subject: tracing: remove CALLER_ADDR2 from wakeup tracer Maneesh Soni was getting a crash when running the wakeup tracer. We debugged it down to the recording of the function with the CALLER_ADDR2 macro. This is used to get the location of the caller to schedule. But the problem comes when schedule is called by assmebly. In the case that Maneesh had, retint_careful would call schedule. But retint_careful does not set up a proper frame pointer. CALLER_ADDR2 is defined as __builtin_return_address(2). This produces the following assembly in the wakeup tracer code. mov 0x0(%rbp),%rcx <--- get the frame pointer of the caller mov %r14d,%r8d mov 0xf2de8e(%rip),%rdi mov 0x8(%rcx),%rsi <-- this is __builtin_return_address(1) mov 0x28(%rdi,%rax,8),%rbx mov (%rcx),%rax <-- get the frame pointer of the caller's caller mov %r12,%rcx mov 0x8(%rax),%rdx <-- this is __builtin_return_address(2) At the reading of 0x8(%rax) Maneesh's machine would take a fault. The reason is that retint_careful did not set up the return address and the content of %rax here was zero. To verify this, I sent Maneesh a patch to create a frame pointer in retint_careful. He ran the test again but this time he would take the same type of fault from sysret_careful. The retint_careful was no longer an issue, but there are other callers that still have issues. Instead of adding frame pointers for all callers to schedule (in possibly all archs), it is much safer to simply not use CALLER_ADDR2. This loses out on knowing what called schedule, but the function tracer will help there if needed. Reported-by: Maneesh Soni Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 3c5ad6b..5bc00e8f 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -154,7 +154,7 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev, if (unlikely(!tracer_enabled || next != wakeup_task)) goto out_unlock; - trace_function(wakeup_trace, CALLER_ADDR1, CALLER_ADDR2, flags, pc); + trace_function(wakeup_trace, CALLER_ADDR0, CALLER_ADDR1, flags, pc); tracing_sched_switch_trace(wakeup_trace, prev, next, flags, pc); /* @@ -257,6 +257,12 @@ probe_wakeup(struct rq *rq, struct task_struct *p, int success) data = wakeup_trace->data[wakeup_cpu]; data->preempt_timestamp = ftrace_now(cpu); tracing_sched_wakeup_trace(wakeup_trace, p, current, flags, pc); + + /* + * We must be careful in using CALLER_ADDR2. But since wake_up + * is not called by an assembly function (where as schedule is) + * it should be safe to use it here. + */ trace_function(wakeup_trace, CALLER_ADDR1, CALLER_ADDR2, flags, pc); out_locked: -- cgit v0.10.2 From cf8e3474654f20433aab9aa35826d43b5f245008 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Mon, 30 Mar 2009 13:48:00 +0800 Subject: tracing: fix incorrect return type of ns2usecs() Impact: fix time output bug in 32bits system ns2usecs() returns 'long', it's incorrect. (In i386) ... -0 [000] 521.442100: _spin_lock <-tick_do_update_jiffies64 -0 [000] 521.442101: do_timer <-tick_do_update_jiffies64 -0 [000] 521.442102: update_wall_time <-do_timer -0 [000] 521.442102: update_xtime_cache <-update_wall_time .... (It always print the time less than 2200 seconds besides ...) Because 'long' is 32bits in i386. ( (1<<31) useconds is about 2200 seconds) ... -0 [001] 4154502640.134759: rcu_bh_qsctr_inc <-__do_softirq -0 [001] 4154502640.134760: _local_bh_enable <-__do_softirq -0 [001] 4154502640.134761: idle_cpu <-irq_exit ... (very large value) Because 'long' is a signed type and it is 32bits in i386. Changes in v2: return 'unsigned long long' instead of 'cycle_t' Signed-off-by: Lai Jiangshan LKML-Reference: <49D05D10.4030009@cn.fujitsu.com> Reported-by: Li Zefan Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a0174a4..457dd8c 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -147,8 +147,7 @@ static int __init set_ftrace_dump_on_oops(char *str) } __setup("ftrace_dump_on_oops", set_ftrace_dump_on_oops); -long -ns2usecs(cycle_t nsec) +unsigned long long ns2usecs(cycle_t nsec) { nsec += 500; do_div(nsec, 1000); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index cb0ce3f..0d81a4a 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -596,7 +596,7 @@ extern int trace_selftest_startup_branch(struct tracer *trace, #endif /* CONFIG_FTRACE_STARTUP_TEST */ extern void *head_page(struct trace_array_cpu *data); -extern long ns2usecs(cycle_t nsec); +extern unsigned long long ns2usecs(cycle_t nsec); extern int trace_vbprintk(unsigned long ip, const char *fmt, va_list args); extern int diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index d72b9a6..64b54a5 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -423,7 +423,7 @@ int trace_print_lat_context(struct trace_iterator *iter) trace_find_cmdline(entry->pid, comm); - ret = trace_seq_printf(s, "%16s %5d %3d %d %08x %08lx [%08lx]" + ret = trace_seq_printf(s, "%16s %5d %3d %d %08x %08lx [%08llx]" " %ld.%03ldms (+%ld.%03ldms): ", comm, entry->pid, iter->cpu, entry->flags, entry->preempt_count, iter->idx, -- cgit v0.10.2 From 5f0c6c03c5fee91c02c696bc9bf4c0d41392abe7 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 27 Mar 2009 14:22:10 +0100 Subject: tracing/ftrace: fix missing include string.h Building a kernel with tracing can raise the following warning on tip/master: kernel/trace/trace.c:1249: error: implicit declaration of function 'vbin_printf' We are missing an include to string.h Reported-by: Ingo Molnar Signed-off-by: Frederic Weisbecker LKML-Reference: <1238160130-7437-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 457dd8c..2230b46 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From 5ac9f62267dc92c7735c642a5942d9e6c1190308 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 25 Mar 2009 20:55:00 -0400 Subject: function-graph: add proper initialization for init task Impact: fix to crash going to kexec The init task did not properly initialize the function graph pointers. Altough these pointers are NULL, they can not be assumed to be NULL for the init task, and must still be properly initialize. This usually is not an issue since a problem only arises when a task exits, and the init tasks do not usually exit. But when doing tests with kexec, the init tasks do exit, and the bug appears. This patch properly initializes the init tasks function graph data structures. Reported-and-Tested-by: Yinghai Lu LKML-Reference: Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 015a3d2..da5405d 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -356,6 +356,9 @@ struct ftrace_graph_ret { #ifdef CONFIG_FUNCTION_GRAPH_TRACER +/* for init task */ +#define INIT_FTRACE_GRAPH .ret_stack = NULL + /* * Stack of return addresses for functions * of a thread. @@ -430,10 +433,11 @@ static inline void unpause_graph_tracing(void) { atomic_dec(¤t->tracing_graph_pause); } -#else +#else /* !CONFIG_FUNCTION_GRAPH_TRACER */ #define __notrace_funcgraph #define __irq_entry +#define INIT_FTRACE_GRAPH static inline void ftrace_graph_init_task(struct task_struct *t) { } static inline void ftrace_graph_exit_task(struct task_struct *t) { } @@ -445,7 +449,7 @@ static inline int task_curr_ret_stack(struct task_struct *tsk) static inline void pause_graph_tracing(void) { } static inline void unpause_graph_tracing(void) { } -#endif +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ #ifdef CONFIG_TRACING #include diff --git a/include/linux/init_task.h b/include/linux/init_task.h index e752d97..cada054 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -5,6 +5,7 @@ #include #include #include +#include #include #include #include @@ -184,6 +185,7 @@ extern struct cred init_cred; INIT_IDS \ INIT_TRACE_IRQFLAGS \ INIT_LOCKDEP \ + INIT_FTRACE_GRAPH \ } -- cgit v0.10.2 From 8bcae09b93e7f96f700b6bb372c2b3f2b36636dc Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Tue, 31 Mar 2009 15:24:51 +0800 Subject: ftrace: Add check of sched_stopped for probe_sched_wakeup The wakeup tracing in sched_switch does not stop when a user disables tracing. This is because the probe_sched_wakeup() is missing the check to prevent the wakeup from being traced. Signed-off-by: Zhao Lei LKML-Reference: <49D1C543.3010307@cn.fujitsu.com> Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index de35f20..9117cea 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -62,6 +62,9 @@ probe_sched_wakeup(struct rq *__rq, struct task_struct *wakee, int success) pc = preempt_count(); tracing_record_cmdline(current); + if (sched_stopped) + return; + local_irq_save(flags); cpu = raw_smp_processor_id(); data = ctx_trace->data[cpu]; -- cgit v0.10.2 From 5ab8026a3016fbed5c73aa070d9f6989cf791099 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 31 Mar 2009 20:41:31 +0800 Subject: tracing, x86: remove duplicated #include Remove duplicated #include in arch/x86/kernel/ftrace.c. Signed-off-by: Huang Weiyi LKML-Reference: <1238503291-2532-1-git-send-email-weiyi.huang@gmail.com> Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 61df775..70a10ca 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -20,7 +20,6 @@ #include #include -#include #include #include -- cgit v0.10.2 From b0dfa978c7a1699fb3506fbfcba0b6a5c4bd17ae Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 1 Apr 2009 22:53:08 +0200 Subject: tracing/ftrace: alloc the started cpumask for the trace file Impact: fix a crash while cat trace file Currently we are using a cpumask to remind each cpu where a trace occured. It lets us notice the user that a cpu just had its first trace. But on latest -tip we have the following crash once we cat the trace file: IP: [] print_trace_fmt+0x45/0xe7 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/class/net/eth0/carrier Pid: 3897, comm: cat Not tainted (2.6.29-tip-02825-g0f22972-dirty #81) EIP: 0060:[] EFLAGS: 00010297 CPU: 0 EIP is at print_trace_fmt+0x45/0xe7 EAX: 00000000 EBX: 00000000 ECX: c12d9e98 EDX: ccdb7010 ESI: d31f4000 EDI: 00322401 EBP: d31f3f10 ESP: d31f3efc DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process cat (pid: 3897, ti=d31f2000 task=d3b3cf20 task.ti=d31f2000) Stack: d31f4080 ccdb7010 d31f4000 d691fe70 ccdb7010 d31f3f24 c0270e5c d31f4000 d691fe70 d31f4000 d31f3f34 c02718e8 c12d9e98 d691fe70 d31f3f70 c02bfc33 00001000 09130000 d3b46e00 d691fe98 00000000 00000079 00000001 00000000 Call Trace: [] ? print_trace_line+0x170/0x17c [] ? s_show+0xa7/0xbd [] ? seq_read+0x24a/0x327 [] ? seq_read+0x0/0x327 [] ? vfs_read+0x86/0xe1 [] ? sys_read+0x40/0x65 [] ? sysenter_do_call+0x12/0x3c Code: 00 00 00 89 45 ec f7 c7 00 20 00 00 89 55 f0 74 4e f6 86 98 10 00 00 02 74 45 8b 86 8c 10 00 00 8b 9e a8 10 00 00 e8 52 f3 ff ff <0f> a3 03 19 c0 85 c0 75 2b 8b 86 8c 10 00 00 8b 9e a8 10 00 00 EIP: [] print_trace_fmt+0x45/0xe7 SS:ESP 0068:d31f3efc CR2: 0000000000000000 ---[ end trace aa9cf38e5ebed9dd ]--- This is because we alloc the iter->started cpumask on tracing_pipe_open but not on tracing_open. It hadn't been noticed until now because we need to have ring buffer overruns to activate the starting of cpu buffer detection. Also, we need a check to not print the messagge for the first trace on the file. Signed-off-by: Frederic Weisbecker LKML-Reference: <1238619188-6109-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 2230b46..fc8c7d6 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1632,7 +1632,11 @@ static void test_cpu_buff_start(struct trace_iterator *iter) return; cpumask_set_cpu(iter->cpu, iter->started); - trace_seq_printf(s, "##### CPU %u buffer started ####\n", iter->cpu); + + /* Don't print started cpu buffer for the first entry of the trace */ + if (iter->idx > 1) + trace_seq_printf(s, "##### CPU %u buffer started ####\n", + iter->cpu); } static enum print_line_t print_trace_fmt(struct trace_iterator *iter) @@ -1867,6 +1871,11 @@ __tracing_open(struct inode *inode, struct file *file) if (current_trace) *iter->trace = *current_trace; + if (!alloc_cpumask_var(&iter->started, GFP_KERNEL)) + goto fail; + + cpumask_clear(iter->started); + if (current_trace && current_trace->print_max) iter->tr = &max_tr; else @@ -1917,6 +1926,7 @@ __tracing_open(struct inode *inode, struct file *file) if (iter->buffer_iter[cpu]) ring_buffer_read_finish(iter->buffer_iter[cpu]); } + free_cpumask_var(iter->started); fail: mutex_unlock(&trace_types_lock); kfree(iter->trace); @@ -1960,6 +1970,7 @@ static int tracing_release(struct inode *inode, struct file *file) seq_release(inode, file); mutex_destroy(&iter->mutex); + free_cpumask_var(iter->started); kfree(iter->trace); kfree(iter); return 0; -- cgit v0.10.2 From bc2b6871c17b3aff79fb14e1a1c06c5f5a187f76 Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Mon, 23 Mar 2009 11:58:31 +0530 Subject: Update /debug/tracing/README Some of the tracers have been renamed, which was not updated in the in-kernel run-time README file. Update it. Signed-off-by: Nikanth Karthikesan LKML-Reference: <200903231158.32151.knikanth@suse.de> Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index fc8c7d6..9d28476 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2369,9 +2369,9 @@ static const char readme_msg[] = "# mkdir /debug\n" "# mount -t debugfs nodev /debug\n\n" "# cat /debug/tracing/available_tracers\n" - "wakeup preemptirqsoff preemptoff irqsoff ftrace sched_switch none\n\n" + "wakeup preemptirqsoff preemptoff irqsoff function sched_switch nop\n\n" "# cat /debug/tracing/current_tracer\n" - "none\n" + "nop\n" "# echo sched_switch > /debug/tracing/current_tracer\n" "# cat /debug/tracing/current_tracer\n" "sched_switch\n" -- cgit v0.10.2 From 1bbe2a83ab68e5cf8c66c372c7cb3b51910c2cfe Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Fri, 3 Apr 2009 18:24:46 +0800 Subject: ftrace: Correct a text align for event format output If we cat debugfs/tracing/events/ftrace/bprint/format, we'll see: name: bprint ID: 6 format: field:unsigned char common_type; offset:0; size:1; field:unsigned char common_flags; offset:1; size:1; field:unsigned char common_preempt_count; offset:2; size:1; field:int common_pid; offset:4; size:4; field:int common_tgid; offset:8; size:4; field:unsigned long ip; offset:12; size:4; field:char * fmt; offset:16; size:4; field: char buf; offset:20; size:0; print fmt: "%08lx (%d) fmt:%p %s" There is an inconsistent blank before char buf. Signed-off-by: Zhao Lei LKML-Reference: <49D5E3EE.70201@cn.fujitsu.com> Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c index 4d9952d..07a22c3 100644 --- a/kernel/trace/trace_export.c +++ b/kernel/trace/trace_export.c @@ -40,7 +40,7 @@ #undef TRACE_FIELD_ZERO_CHAR #define TRACE_FIELD_ZERO_CHAR(item) \ - ret = trace_seq_printf(s, "\tfield: char " #item ";\t" \ + ret = trace_seq_printf(s, "\tfield:char " #item ";\t" \ "offset:%u;\tsize:0;\n", \ (unsigned int)offsetof(typeof(field), item)); \ if (!ret) \ -- cgit v0.10.2 From 38089c658bf372adc2bd7b3597fceac0c7cecca6 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 7 Apr 2009 16:35:56 +0200 Subject: HID: hidraw -- fix missing unlocks in unlocked_ioctl There were 2 places that returned directly instead of releasing their locks. I sent a fix for this file earlier but ended up missing these spots. I think what happened is that I have improved my checker script since then... Or maybe I just screwed up. Signed-off-by: Dan Carpenter Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index e263d47..00ccf4b 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -285,8 +285,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) { int len; - if (!hid->name) - return 0; + if (!hid->name) { + ret = 0; + break; + } len = strlen(hid->name) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); @@ -297,8 +299,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) { int len; - if (!hid->phys) - return 0; + if (!hid->phys) { + ret = 0; + break; + } len = strlen(hid->phys) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); -- cgit v0.10.2 From d9ad8bc0ca823705413f75b50c442a88cc518b35 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Sun, 5 Apr 2009 16:20:02 +0200 Subject: branch tracer: Fix for enabling branch profiling makes sparse unusable One of the changes between kernels 2.6.28 and 2.6.29 is that a branch profiler has been added for if() statements. Unfortunately this patch makes the sparse output unusable with CONFIG_TRACE_BRANCH_PROFILING=y: when branch profiling is enabled, sparse prints so much false positives that the real issues are no longer visible. This behavior can be reproduced as follows: * enable CONFIG_TRACE_BRANCH_PROFILING, e.g. by running make allyesconfig or make allmodconfig. * run make C=2 Result: a huge number of the following sparse warnings. ... include/linux/cpumask.h:547:2: warning: symbol '______r' shadows an earlier one include/linux/cpumask.h:547:2: originally declared here ... The patch below fixes this by disabling branch profiling while analyzing the kernel code with sparse. See also: * http://lkml.org/lkml/2008/11/21/18 * http://bugzilla.kernel.org/show_bug.cgi?id=12925 Signed-off-by: Bart Van Assche Cc: Andrew Morton Cc: Steven Rostedt LKML-Reference: <200904051620.02311.bart.vanassche@gmail.com> Signed-off-by: Ingo Molnar diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 6faa7e5..8872ad6 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -76,7 +76,8 @@ struct ftrace_branch_data { * Note: DISABLE_BRANCH_PROFILING can be used by special lowlevel code * to disable branch tracing on a per file basis. */ -#if defined(CONFIG_TRACE_BRANCH_PROFILING) && !defined(DISABLE_BRANCH_PROFILING) +#if defined(CONFIG_TRACE_BRANCH_PROFILING) \ + && !defined(DISABLE_BRANCH_PROFILING) && !defined(__CHECKER__) void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); #define likely_notrace(x) __builtin_expect(!!(x), 1) -- cgit v0.10.2 From ab3c9c686e22ab264269337ce7b75d9760211198 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 7 Apr 2009 07:59:41 -0700 Subject: branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y Fix the branch tracer barfing on comma statements within if () statements. Signed-off-by: Ingo Molnar diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 8872ad6..37bcb50 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -115,7 +115,9 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); * "Define 'is'", Bill Clinton * "Define 'if'", Steven Rostedt */ -#define if(cond) if (__builtin_constant_p((cond)) ? !!(cond) : \ +#define if(cond, ...) __trace_if( (cond , ## __VA_ARGS__) ) +#define __trace_if(cond) \ + if (__builtin_constant_p((cond)) ? !!(cond) : \ ({ \ int ______r; \ static struct ftrace_branch_data \ -- cgit v0.10.2 From 035a571120ddbe4f92b91bbe46f3eff05b6e43eb Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 7 Apr 2009 07:40:57 +0800 Subject: ocfs2: Reserve 1 more cluster in expanding_inline_dir for indexed dir. In ocfs2_expand_inline_dir, we calculate whether we need 1 extra cluster if we can't store the dx inline the root and save it in dx_alloc. So add it when we call ocfs2_reserve_clusters. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index e71160c..07d8920 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -2934,7 +2934,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh, */ BUG_ON(alloc > 2); - ret = ocfs2_reserve_clusters(osb, alloc, &data_ac); + ret = ocfs2_reserve_clusters(osb, alloc + dx_alloc, &data_ac); if (ret) { mlog_errno(ret); goto out; -- cgit v0.10.2 From 6e9793812583e3c9e3674c8c8af1b114afae8673 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 7 Apr 2009 08:41:57 +0000 Subject: sh: urquell: Add board comment Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index 8367d1d..f217f35 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -2,6 +2,8 @@ * Renesas Technology Corp. SH7786 Urquell Support. * * Copyright (C) 2008 Kuninori Morimoto + * + * Based on board-sh7785lcr.c * Copyright (C) 2008 Yoshihiro Shimoda * * This file is subject to the terms and conditions of the GNU General Public @@ -21,6 +23,29 @@ #include #include +/* SWx 8765 4321 + *---------------------------- + * SW1 1101 0010 -> Pck 66MHz version + * (0101 0010) Pck 33MHz version (check CS1BCR) + * SW2 xxxx x1x0 -> little endian + * 29bit mode + * SW47 0001 1000 -> CS0 : nor flash + * CS1 : SRAM, registers, LAN, PCMCIA + * 38400 bps + * + * Address + * 0x00000000 Nor Flash + * 0x04000000 SRAM + * 0x05000000 FPGA register + * 0x05800000 LAN91C111 + * 0x06000000 PCMCIA + * 0x10000000 PCIe + * 0x14000000 LRAM/URAM + * 0x18000000 ATA/NAND-Flash + * 0x1C000000 SH7786 Control register + */ + +/* HeartBeat */ static struct resource heartbeat_resources[] = { [0] = { .start = BOARDREG(SLEDR), @@ -43,6 +68,7 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +/* LAN91C111 */ static struct smc91x_platdata smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -69,6 +95,7 @@ static struct platform_device smc91x_eth_device = { }, }; +/* Nor Flash */ static struct mtd_partition nor_flash_partitions[] = { { .name = "loader", -- cgit v0.10.2 From 1e274a582710e95d93b86e8d47e9fcce4ca09d01 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 7 Apr 2009 10:59:25 -0700 Subject: x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modes Impact: Fixes these modes on at least one system The rewrite of the setup code into C resequenced the font setting and register reprogramming phases of configuring nonstandard VGA modes which use 480 scan lines in text mode. However, there exists at least one board (Micro-Star MS-7383 version 2.0) on which this resequencing causes an unusable display. Revert to the original sequencing: set up 480-line mode, install the font, and then adjust the vertical end register appropriately. This failure was masked by the fact that the 480-line setup was broken until checkin 5f641356127712fbdce0eee120e5ce115860c17f (therefore this is not a -stable candidate bug fix.) Reported-by: Andi Kleen Signed-off-by: H. Peter Anvin diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 95d86ce..9e0587a 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -129,22 +129,18 @@ u16 vga_crtc(void) return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4; } -static void vga_set_480_scanlines(int lines) +static void vga_set_480_scanlines(void) { u16 crtc; /* CRTC base address */ u8 csel; /* CRTC miscellaneous output register */ - u8 ovfw; /* CRTC overflow register */ - int end = lines-1; crtc = vga_crtc(); - ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40); - out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */ out_idx(0x0b, crtc, 0x06); /* Vertical total */ - out_idx(ovfw, crtc, 0x07); /* Vertical overflow */ + out_idx(0x3e, crtc, 0x07); /* Vertical overflow */ out_idx(0xea, crtc, 0x10); /* Vertical sync start */ - out_idx(end, crtc, 0x12); /* Vertical display end */ + out_idx(0xdf, crtc, 0x12); /* Vertical display end */ out_idx(0xe7, crtc, 0x15); /* Vertical blank start */ out_idx(0x04, crtc, 0x16); /* Vertical blank end */ csel = inb(0x3cc); @@ -153,21 +149,38 @@ static void vga_set_480_scanlines(int lines) outb(csel, 0x3c2); } +static void vga_set_vertical_end(int lines) +{ + u16 crtc; /* CRTC base address */ + u8 ovfw; /* CRTC overflow register */ + int end = lines-1; + + crtc = vga_crtc(); + + ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40); + + out_idx(ovfw, crtc, 0x07); /* Vertical overflow */ + out_idx(end, crtc, 0x12); /* Vertical display end */ +} + static void vga_set_80x30(void) { - vga_set_480_scanlines(30*16); + vga_set_480_scanlines(); + vga_set_vertical_end(30*16); } static void vga_set_80x34(void) { + vga_set_480_scanlines(); vga_set_14font(); - vga_set_480_scanlines(34*14); + vga_set_vertical_end(34*14); } static void vga_set_80x60(void) { + vga_set_480_scanlines(); vga_set_8font(); - vga_set_480_scanlines(60*8); + vga_set_vertical_end(60*8); } static int vga_set_mode(struct mode_info *mode) -- cgit v0.10.2 From 0f2ddca66d70c8ccba7486cf2d79c6b60e777abd Mon Sep 17 00:00:00 2001 From: "From: Thiemo Nagel" Date: Tue, 7 Apr 2009 14:07:47 -0400 Subject: ext4: check block device size on mount Signed-off-by: Thiemo Nagel Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9987bba..2958f4e 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2508,6 +2508,15 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) if (EXT4_BLOCKS_PER_GROUP(sb) == 0) goto cantfind_ext4; + /* check blocks count against device size */ + blocks_count = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits; + if (blocks_count && ext4_blocks_count(es) > blocks_count) { + printk(KERN_WARNING "EXT4-fs: bad geometry: block count %llu " + "exceeds size of device (%llu blocks)\n", + ext4_blocks_count(es), blocks_count); + goto failed_mount; + } + /* * It makes no sense for the first data block to be beyond the end * of the filesystem. -- cgit v0.10.2 From 5d38258ec026921a7b266f4047ebeaa75db358e5 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 7 Apr 2009 10:55:38 +0200 Subject: ACPI battery: fix async boot oops > BUG: unable to handle kernel NULL pointer dereference at (null) What happens is that the battery module's init sections are being freed before the async callback (which was marked __init) has run. This theory is supported by the fact that the bad RIP value is a vmalloc address. The immediate fix is to make this a non-init call. (A better long-term fix is of course to wait with init-section unloading until a module's async initcalls have been run, which would allow us to discard this function which is still only run once, after all. Perhaps a new async_initcall() function for the async/module API, if this is needed for other modules in the future?) Reported-by: Arkadiusz Miskiewicz Signed-off-by: Vegard Nossum Tested-by: Alessandro Suardi Tested-by: Rafael J. Wysocki Signed-off-by: Len Brown diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b0de631..3c7d894 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -903,7 +903,7 @@ static struct acpi_driver acpi_battery_driver = { }, }; -static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie) +static void acpi_battery_init_async(void *unused, async_cookie_t cookie) { if (acpi_disabled) return; -- cgit v0.10.2 From 342d550db1bc0b879007a8cdb38645558e839680 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Apr 2009 15:37:06 +0000 Subject: ACPI: thermal: use .notify method instead of installing handler directly This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Signed-off-by: Bjorn Helgaas CC: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index e8c143c..0914eaa 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -98,6 +98,7 @@ MODULE_PARM_DESC(psv, "Disable or override all passive trip points."); static int acpi_thermal_add(struct acpi_device *device); static int acpi_thermal_remove(struct acpi_device *device, int type); static int acpi_thermal_resume(struct acpi_device *device); +static void acpi_thermal_notify(struct acpi_device *device, u32 event); static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file); static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file); static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file); @@ -123,6 +124,7 @@ static struct acpi_driver acpi_thermal_driver = { .add = acpi_thermal_add, .remove = acpi_thermal_remove, .resume = acpi_thermal_resume, + .notify = acpi_thermal_notify, }, }; @@ -1264,17 +1266,14 @@ static int acpi_thermal_remove_fs(struct acpi_device *device) Driver Interface -------------------------------------------------------------------------- */ -static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) +static void acpi_thermal_notify(struct acpi_device *device, u32 event) { - struct acpi_thermal *tz = data; - struct acpi_device *device = NULL; + struct acpi_thermal *tz = acpi_driver_data(device); if (!tz) return; - device = tz->device; - switch (event) { case ACPI_THERMAL_NOTIFY_TEMPERATURE: acpi_thermal_check(tz); @@ -1298,8 +1297,6 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) "Unsupported event [0x%x]\n", event)); break; } - - return; } static int acpi_thermal_get_info(struct acpi_thermal *tz) @@ -1337,7 +1334,6 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) static int acpi_thermal_add(struct acpi_device *device) { int result = 0; - acpi_status status = AE_OK; struct acpi_thermal *tz = NULL; @@ -1368,21 +1364,11 @@ static int acpi_thermal_add(struct acpi_device *device) if (result) goto unregister_thermal_zone; - status = acpi_install_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_thermal_notify, tz); - if (ACPI_FAILURE(status)) { - result = -ENODEV; - goto remove_fs; - } - printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device), acpi_device_bid(device), KELVIN_TO_CELSIUS(tz->temperature)); goto end; -remove_fs: - acpi_thermal_remove_fs(device); unregister_thermal_zone: thermal_zone_device_unregister(tz->thermal_zone); free_memory: @@ -1393,7 +1379,6 @@ end: static int acpi_thermal_remove(struct acpi_device *device, int type) { - acpi_status status = AE_OK; struct acpi_thermal *tz = NULL; if (!device || !acpi_driver_data(device)) @@ -1401,10 +1386,6 @@ static int acpi_thermal_remove(struct acpi_device *device, int type) tz = acpi_driver_data(device); - status = acpi_remove_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_thermal_notify); - acpi_thermal_remove_fs(device); acpi_thermal_unregister_thermal_zone(tz); mutex_destroy(&tz->lock); -- cgit v0.10.2 From 7015558fca5ee82fc17227b61d88ddaa02d82242 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Apr 2009 15:37:11 +0000 Subject: ACPI: video: use .notify method instead of installing handler directly This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Signed-off-by: Bjorn Helgaas CC: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index ab06143..cd4fb75 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -79,6 +79,7 @@ module_param(brightness_switch_enabled, bool, 0644); static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); static int acpi_video_resume(struct acpi_device *device); +static void acpi_video_bus_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id video_device_ids[] = { {ACPI_VIDEO_HID, 0}, @@ -94,6 +95,7 @@ static struct acpi_driver acpi_video_bus = { .add = acpi_video_bus_add, .remove = acpi_video_bus_remove, .resume = acpi_video_resume, + .notify = acpi_video_bus_notify, }, }; @@ -1986,17 +1988,15 @@ static int acpi_video_bus_stop_devices(struct acpi_video_bus *video) return acpi_video_bus_DOS(video, 0, 1); } -static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data) +static void acpi_video_bus_notify(struct acpi_device *device, u32 event) { - struct acpi_video_bus *video = data; - struct acpi_device *device = NULL; + struct acpi_video_bus *video = acpi_driver_data(device); struct input_dev *input; int keycode; if (!video) return; - device = video->device; input = video->input; switch (event) { @@ -2127,7 +2127,6 @@ static int acpi_video_resume(struct acpi_device *device) static int acpi_video_bus_add(struct acpi_device *device) { - acpi_status status; struct acpi_video_bus *video; struct input_dev *input; int error; @@ -2169,20 +2168,10 @@ static int acpi_video_bus_add(struct acpi_device *device) acpi_video_bus_get_devices(video, device); acpi_video_bus_start_devices(video); - status = acpi_install_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_video_bus_notify, video); - if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX - "Error installing notify handler\n"); - error = -ENODEV; - goto err_stop_video; - } - video->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_uninstall_notify; + goto err_stop_video; } snprintf(video->phys, sizeof(video->phys), @@ -2218,9 +2207,6 @@ static int acpi_video_bus_add(struct acpi_device *device) err_free_input_dev: input_free_device(input); - err_uninstall_notify: - acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_video_bus_notify); err_stop_video: acpi_video_bus_stop_devices(video); acpi_video_bus_put_devices(video); @@ -2235,7 +2221,6 @@ static int acpi_video_bus_add(struct acpi_device *device) static int acpi_video_bus_remove(struct acpi_device *device, int type) { - acpi_status status = 0; struct acpi_video_bus *video = NULL; @@ -2245,11 +2230,6 @@ static int acpi_video_bus_remove(struct acpi_device *device, int type) video = acpi_driver_data(device); acpi_video_bus_stop_devices(video); - - status = acpi_remove_notify_handler(video->device->handle, - ACPI_DEVICE_NOTIFY, - acpi_video_bus_notify); - acpi_video_bus_put_devices(video); acpi_video_bus_remove_fs(device); -- cgit v0.10.2 From 700b6721cd1b891b67c2dcee046be12154a21fd6 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Apr 2009 15:37:16 +0000 Subject: fujitsu-laptop: use .notify method instead of installing handler directly This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Tested by Tony on Fujitsu-Siemens Lifebook S6420 [FJNB1E6] with BIOS 1.18 (01/09/2009). Tested by Jonathan on Fujitsu S7020. Signed-off-by: Bjorn Helgaas Acked-By: Tony Vroon Tested-By: Tony Vroon Acked-by: Jonathan Woithe Tested-by: Jonathan Woithe Signed-off-by: Len Brown diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 45940f3..10f8796 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -203,7 +203,7 @@ struct led_classdev kblamps_led = { static u32 dbg_level = 0x03; #endif -static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data); +static void acpi_fujitsu_notify(struct acpi_device *device, u32 event); /* Fujitsu ACPI interface function */ @@ -658,7 +658,6 @@ static struct dmi_system_id fujitsu_dmi_table[] = { static int acpi_fujitsu_add(struct acpi_device *device) { - acpi_status status; acpi_handle handle; int result = 0; int state = 0; @@ -673,20 +672,10 @@ static int acpi_fujitsu_add(struct acpi_device *device) sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); device->driver_data = fujitsu; - status = acpi_install_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_fujitsu_notify, fujitsu); - - if (ACPI_FAILURE(status)) { - printk(KERN_ERR "Error installing notify handler\n"); - error = -ENODEV; - goto err_stop; - } - fujitsu->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_uninstall_notify; + goto err_stop; } snprintf(fujitsu->phys, sizeof(fujitsu->phys), @@ -743,9 +732,6 @@ static int acpi_fujitsu_add(struct acpi_device *device) end: err_free_input_dev: input_free_device(input); -err_uninstall_notify: - acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_fujitsu_notify); err_stop: return result; @@ -753,7 +739,6 @@ err_stop: static int acpi_fujitsu_remove(struct acpi_device *device, int type) { - acpi_status status; struct fujitsu_t *fujitsu = NULL; if (!device || !acpi_driver_data(device)) @@ -761,10 +746,6 @@ static int acpi_fujitsu_remove(struct acpi_device *device, int type) fujitsu = acpi_driver_data(device); - status = acpi_remove_notify_handler(fujitsu->acpi_handle, - ACPI_DEVICE_NOTIFY, - acpi_fujitsu_notify); - if (!device || !acpi_driver_data(device)) return -EINVAL; @@ -775,7 +756,7 @@ static int acpi_fujitsu_remove(struct acpi_device *device, int type) /* Brightness notify */ -static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data) +static void acpi_fujitsu_notify(struct acpi_device *device, u32 event) { struct input_dev *input; int keycode; @@ -829,8 +810,6 @@ static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data) input_report_key(input, keycode, 0); input_sync(input); } - - return; } /* ACPI device for hotkey handling */ @@ -1107,6 +1086,7 @@ static struct acpi_driver acpi_fujitsu_driver = { .ops = { .add = acpi_fujitsu_add, .remove = acpi_fujitsu_remove, + .notify = acpi_fujitsu_notify, }, }; -- cgit v0.10.2 From b4ec0275464756f4fd4108b4a4ca7aff61358ad3 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Apr 2009 15:37:22 +0000 Subject: fujitsu-laptop: use .notify method instead of installing hotkey handler directly This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Tested by Tony on Fujitsu-Siemens Lifebook S6420 [FJNB1E6] with BIOS 1.18 (01/09/2009). Tested by Jonathan on Fujitsu S7020. Signed-off-by: Bjorn Helgaas Acked-By: Tony Vroon Tested-By: Tony Vroon Acked-by: Jonathan Woithe Tested-by: Jonathan Woithe Signed-off-by: Len Brown diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 10f8796..218b9a1 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -174,8 +174,7 @@ struct fujitsu_hotkey_t { static struct fujitsu_hotkey_t *fujitsu_hotkey; -static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, - void *data); +static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event); #ifdef CONFIG_LEDS_CLASS static enum led_brightness logolamp_get(struct led_classdev *cdev); @@ -816,7 +815,6 @@ static void acpi_fujitsu_notify(struct acpi_device *device, u32 event) static int acpi_fujitsu_hotkey_add(struct acpi_device *device) { - acpi_status status; acpi_handle handle; int result = 0; int state = 0; @@ -833,17 +831,6 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); device->driver_data = fujitsu_hotkey; - status = acpi_install_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_fujitsu_hotkey_notify, - fujitsu_hotkey); - - if (ACPI_FAILURE(status)) { - printk(KERN_ERR "Error installing notify handler\n"); - error = -ENODEV; - goto err_stop; - } - /* kfifo */ spin_lock_init(&fujitsu_hotkey->fifo_lock); fujitsu_hotkey->fifo = @@ -858,7 +845,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) fujitsu_hotkey->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_uninstall_notify; + goto err_free_fifo; } snprintf(fujitsu_hotkey->phys, sizeof(fujitsu_hotkey->phys), @@ -954,9 +941,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) end: err_free_input_dev: input_free_device(input); -err_uninstall_notify: - acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_fujitsu_hotkey_notify); +err_free_fifo: kfifo_free(fujitsu_hotkey->fifo); err_stop: @@ -965,7 +950,6 @@ err_stop: static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) { - acpi_status status; struct fujitsu_hotkey_t *fujitsu_hotkey = NULL; if (!device || !acpi_driver_data(device)) @@ -973,10 +957,6 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) fujitsu_hotkey = acpi_driver_data(device); - status = acpi_remove_notify_handler(fujitsu_hotkey->acpi_handle, - ACPI_DEVICE_NOTIFY, - acpi_fujitsu_hotkey_notify); - fujitsu_hotkey->acpi_handle = NULL; kfifo_free(fujitsu_hotkey->fifo); @@ -984,8 +964,7 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) return 0; } -static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, - void *data) +static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) { struct input_dev *input; int keycode, keycode_r; @@ -1068,8 +1047,6 @@ static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, input_sync(input); break; } - - return; } /* Initialization */ @@ -1102,6 +1079,7 @@ static struct acpi_driver acpi_fujitsu_hotkey_driver = { .ops = { .add = acpi_fujitsu_hotkey_add, .remove = acpi_fujitsu_hotkey_remove, + .notify = acpi_fujitsu_hotkey_notify, }, }; -- cgit v0.10.2 From cddd1f71d972a43c88f0ef91e1b71023539cd6e0 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Apr 2009 15:37:27 +0000 Subject: panasonic-laptop: use .notify method instead of installing handler directly This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Signed-off-by: Bjorn Helgaas CC: Harald Welte Signed-off-by: Len Brown diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index a5ce4bc..1a11de0 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -176,6 +176,7 @@ enum SINF_BITS { SINF_NUM_BATTERIES = 0, static int acpi_pcc_hotkey_add(struct acpi_device *device); static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type); static int acpi_pcc_hotkey_resume(struct acpi_device *device); +static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id pcc_device_ids[] = { { "MAT0012", 0}, @@ -194,6 +195,7 @@ static struct acpi_driver acpi_pcc_driver = { .add = acpi_pcc_hotkey_add, .remove = acpi_pcc_hotkey_remove, .resume = acpi_pcc_hotkey_resume, + .notify = acpi_pcc_hotkey_notify, }, }; @@ -527,9 +529,9 @@ static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc) return; } -static void acpi_pcc_hotkey_notify(acpi_handle handle, u32 event, void *data) +static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event) { - struct pcc_acpi *pcc = (struct pcc_acpi *) data; + struct pcc_acpi *pcc = acpi_driver_data(device); switch (event) { case HKEY_NOTIFY: @@ -599,7 +601,6 @@ static int acpi_pcc_hotkey_resume(struct acpi_device *device) static int acpi_pcc_hotkey_add(struct acpi_device *device) { - acpi_status status; struct pcc_acpi *pcc; int num_sifr, result; @@ -640,22 +641,11 @@ static int acpi_pcc_hotkey_add(struct acpi_device *device) goto out_sinf; } - /* initialize hotkey input device */ - status = acpi_install_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY, - acpi_pcc_hotkey_notify, pcc); - - if (ACPI_FAILURE(status)) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Error installing notify handler\n")); - result = -ENODEV; - goto out_input; - } - /* initialize backlight */ pcc->backlight = backlight_device_register("panasonic", NULL, pcc, &pcc_backlight_ops); if (IS_ERR(pcc->backlight)) - goto out_notify; + goto out_input; if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, @@ -680,9 +670,6 @@ static int acpi_pcc_hotkey_add(struct acpi_device *device) out_backlight: backlight_device_unregister(pcc->backlight); -out_notify: - acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY, - acpi_pcc_hotkey_notify); out_input: input_unregister_device(pcc->input_dev); /* no need to input_free_device() since core input API refcount and @@ -723,9 +710,6 @@ static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type) backlight_device_unregister(pcc->backlight); - acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY, - acpi_pcc_hotkey_notify); - input_unregister_device(pcc->input_dev); /* no need to input_free_device() since core input API refcount and * free()s the device */ -- cgit v0.10.2 From 8037d6e67709cf497134bbabd77b07dfc7c31fd6 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Apr 2009 15:37:32 +0000 Subject: sony-laptop: use .notify method instead of installing handler directly This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Signed-off-by: Bjorn Helgaas CC: Mattia Dongili Signed-off-by: Len Brown diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index a90ec5c..d3c92d7 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -914,7 +914,7 @@ static struct sony_nc_event sony_127_events[] = { /* * ACPI callbacks */ -static void sony_acpi_notify(acpi_handle handle, u32 event, void *data) +static void sony_nc_notify(struct acpi_device *device, u32 event) { u32 ev = event; @@ -933,7 +933,7 @@ static void sony_acpi_notify(acpi_handle handle, u32 event, void *data) struct sony_nc_event *key_event; if (sony_call_snc_handle(key_handle, 0x200, &result)) { - dprintk("sony_acpi_notify, unable to decode" + dprintk("sony_nc_notify, unable to decode" " event 0x%.2x 0x%.2x\n", key_handle, ev); /* restore the original event */ @@ -968,7 +968,7 @@ static void sony_acpi_notify(acpi_handle handle, u32 event, void *data) } else sony_laptop_report_input_event(ev); - dprintk("sony_acpi_notify, event: 0x%.2x\n", ev); + dprintk("sony_nc_notify, event: 0x%.2x\n", ev); acpi_bus_generate_proc_event(sony_nc_acpi_device, 1, ev); } @@ -1276,15 +1276,6 @@ static int sony_nc_add(struct acpi_device *device) goto outwalk; } - status = acpi_install_notify_handler(sony_nc_acpi_handle, - ACPI_DEVICE_NOTIFY, - sony_acpi_notify, NULL); - if (ACPI_FAILURE(status)) { - printk(KERN_WARNING DRV_PFX "unable to install notify handler (%u)\n", status); - result = -ENODEV; - goto outinput; - } - if (acpi_video_backlight_support()) { printk(KERN_INFO DRV_PFX "brightness ignored, must be " "controlled by ACPI video driver\n"); @@ -1362,13 +1353,6 @@ static int sony_nc_add(struct acpi_device *device) if (sony_backlight_device) backlight_device_unregister(sony_backlight_device); - status = acpi_remove_notify_handler(sony_nc_acpi_handle, - ACPI_DEVICE_NOTIFY, - sony_acpi_notify); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n"); - - outinput: sony_laptop_remove_input(); outwalk: @@ -1378,7 +1362,6 @@ static int sony_nc_add(struct acpi_device *device) static int sony_nc_remove(struct acpi_device *device, int type) { - acpi_status status; struct sony_nc_value *item; if (sony_backlight_device) @@ -1386,12 +1369,6 @@ static int sony_nc_remove(struct acpi_device *device, int type) sony_nc_acpi_device = NULL; - status = acpi_remove_notify_handler(sony_nc_acpi_handle, - ACPI_DEVICE_NOTIFY, - sony_acpi_notify); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n"); - for (item = sony_nc_values; item->name; ++item) { device_remove_file(&sony_pf_device->dev, &item->devattr); } @@ -1425,6 +1402,7 @@ static struct acpi_driver sony_nc_driver = { .add = sony_nc_add, .remove = sony_nc_remove, .resume = sony_nc_resume, + .notify = sony_nc_notify, }, }; -- cgit v0.10.2 From f61bb93927fbc2933abe870813daba9d331aa121 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Apr 2009 15:37:37 +0000 Subject: ACPI: WMI: use .notify method instead of installing handler directly This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Signed-off-by: Bjorn Helgaas CC: Carlos Corbacho Signed-off-by: Len Brown diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 2f269e11..043b208 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -81,6 +81,7 @@ static struct wmi_block wmi_blocks; static int acpi_wmi_remove(struct acpi_device *device, int type); static int acpi_wmi_add(struct acpi_device *device); +static void acpi_wmi_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id wmi_device_ids[] = { {"PNP0C14", 0}, @@ -96,6 +97,7 @@ static struct acpi_driver acpi_wmi_driver = { .ops = { .add = acpi_wmi_add, .remove = acpi_wmi_remove, + .notify = acpi_wmi_notify, }, }; @@ -643,12 +645,11 @@ acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address, } } -static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) +static void acpi_wmi_notify(struct acpi_device *device, u32 event) { struct guid_block *block; struct wmi_block *wblock; struct list_head *p; - struct acpi_device *device = data; list_for_each(p, &wmi_blocks.list) { wblock = list_entry(p, struct wmi_block, list); @@ -669,9 +670,6 @@ static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) static int acpi_wmi_remove(struct acpi_device *device, int type) { - acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_wmi_notify); - acpi_remove_address_space_handler(device->handle, ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler); @@ -683,13 +681,6 @@ static int __init acpi_wmi_add(struct acpi_device *device) acpi_status status; int result = 0; - status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_wmi_notify, device); - if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Error installing notify handler\n"); - return -ENODEV; - } - status = acpi_install_address_space_handler(device->handle, ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler, -- cgit v0.10.2 From 2b2ec7554cf7ec5e4412f89a5af6abe8ce950700 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 7 Apr 2009 14:02:53 -0700 Subject: NFS: Fix the return value in nfs_page_mkwrite() Commit c2ec175c39f62949438354f603f4aa170846aabb ("mm: page_mkwrite change prototype to match fault") exposed a bug in the NFS implementation of page_mkwrite. We should be returning 0 on success... Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 3523b89..5a97bcf 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -516,8 +516,6 @@ static int nfs_vm_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) goto out_unlock; ret = nfs_updatepage(filp, page, 0, pagelen); - if (ret == 0) - ret = pagelen; out_unlock: unlock_page(page); if (ret) -- cgit v0.10.2 From 577c9c456f0e1371cbade38eaf91ae8e8a308555 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 7 Apr 2009 14:25:01 -0700 Subject: Linux 2.6.30-rc1 diff --git a/Makefile b/Makefile index c6307b6..e5ad5fd 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 -SUBLEVEL = 29 -EXTRAVERSION = +SUBLEVEL = 30 +EXTRAVERSION = -rc1 NAME = Temporary Tasmanian Devil # *DOCUMENTATION* -- cgit v0.10.2 From fdbdc7fc79c02ae4ede869d514179a2c65633d28 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 7 Apr 2009 17:33:58 -0400 Subject: ACPICA: delete check for AML access to port 0x81-83 Sony laptops apparently write 4-bytes (rather than 1 byte) to debug port 0x80, which spews error messages: Denied AML access to port 0x00000080/4 (DMA1 0x0081-0x0083) [20090320] http://bugzilla.kernel.org/show_bug.cgi?id=13036 Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c index bd3c937..7737afb 100644 --- a/drivers/acpi/acpica/hwvalid.c +++ b/drivers/acpi/acpica/hwvalid.c @@ -90,7 +90,6 @@ static const struct acpi_port_info acpi_protected_ports[] = { {"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP}, {"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP}, {"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP}, - {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP}, {"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP}, {"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP}, {"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP}, -- cgit v0.10.2 From e4f6937222dbb61b8b8e62caca3d32e648b3b14b Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 6 Apr 2009 11:26:07 -0700 Subject: ACPI x86: Cleanup acpi_cpufreq structures related to aperf/mperf Change structure name to make the code cleaner and simpler. No functionality change in this patch. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 19f6b9d..340bdbe 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -241,23 +241,23 @@ static u32 get_cur_val(const struct cpumask *mask) return cmd.val; } -struct perf_cur { +struct perf_pair { union { struct { u32 lo; u32 hi; } split; u64 whole; - } aperf_cur, mperf_cur; + } aperf, mperf; }; static long read_measured_perf_ctrs(void *_cur) { - struct perf_cur *cur = _cur; + struct perf_pair *cur = _cur; - rdmsr(MSR_IA32_APERF, cur->aperf_cur.split.lo, cur->aperf_cur.split.hi); - rdmsr(MSR_IA32_MPERF, cur->mperf_cur.split.lo, cur->mperf_cur.split.hi); + rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi); + rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi); wrmsr(MSR_IA32_APERF, 0, 0); wrmsr(MSR_IA32_MPERF, 0, 0); @@ -281,7 +281,7 @@ static long read_measured_perf_ctrs(void *_cur) static unsigned int get_measured_perf(struct cpufreq_policy *policy, unsigned int cpu) { - struct perf_cur cur; + struct perf_pair cur; unsigned int perf_percent; unsigned int retval; @@ -294,39 +294,37 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, * Get an approximate value. Return failure in case we cannot get * an approximate value. */ - if (unlikely(cur.aperf_cur.split.hi || cur.mperf_cur.split.hi)) { + if (unlikely(cur.aperf.split.hi || cur.mperf.split.hi)) { int shift_count; u32 h; - h = max_t(u32, cur.aperf_cur.split.hi, cur.mperf_cur.split.hi); + h = max_t(u32, cur.aperf.split.hi, cur.mperf.split.hi); shift_count = fls(h); - cur.aperf_cur.whole >>= shift_count; - cur.mperf_cur.whole >>= shift_count; + cur.aperf.whole >>= shift_count; + cur.mperf.whole >>= shift_count; } - if (((unsigned long)(-1) / 100) < cur.aperf_cur.split.lo) { + if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) { int shift_count = 7; - cur.aperf_cur.split.lo >>= shift_count; - cur.mperf_cur.split.lo >>= shift_count; + cur.aperf.split.lo >>= shift_count; + cur.mperf.split.lo >>= shift_count; } - if (cur.aperf_cur.split.lo && cur.mperf_cur.split.lo) - perf_percent = (cur.aperf_cur.split.lo * 100) / - cur.mperf_cur.split.lo; + if (cur.aperf.split.lo && cur.mperf.split.lo) + perf_percent = (cur.aperf.split.lo * 100) / cur.mperf.split.lo; else perf_percent = 0; #else - if (unlikely(((unsigned long)(-1) / 100) < cur.aperf_cur.whole)) { + if (unlikely(((unsigned long)(-1) / 100) < cur.aperf.whole)) { int shift_count = 7; - cur.aperf_cur.whole >>= shift_count; - cur.mperf_cur.whole >>= shift_count; + cur.aperf.whole >>= shift_count; + cur.mperf.whole >>= shift_count; } - if (cur.aperf_cur.whole && cur.mperf_cur.whole) - perf_percent = (cur.aperf_cur.whole * 100) / - cur.mperf_cur.whole; + if (cur.aperf.whole && cur.mperf.whole) + perf_percent = (cur.aperf.whole * 100) / cur.mperf.whole; else perf_percent = 0; -- cgit v0.10.2 From 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 6 Apr 2009 11:26:08 -0700 Subject: ACPI x86: Make aperf/mperf MSR access in acpi_cpufreq read_only Do not write zeroes to APERF and MPERF by ondemand governor. With this change, other users can share these MSRs for reads. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 340bdbe..9d3af38 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -68,6 +68,7 @@ struct acpi_cpufreq_data { unsigned int max_freq; unsigned int resume; unsigned int cpu_feature; + u64 saved_aperf, saved_mperf; }; static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data); @@ -259,9 +260,6 @@ static long read_measured_perf_ctrs(void *_cur) rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi); rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi); - wrmsr(MSR_IA32_APERF, 0, 0); - wrmsr(MSR_IA32_MPERF, 0, 0); - return 0; } @@ -281,13 +279,20 @@ static long read_measured_perf_ctrs(void *_cur) static unsigned int get_measured_perf(struct cpufreq_policy *policy, unsigned int cpu) { - struct perf_pair cur; + struct perf_pair readin, cur; unsigned int perf_percent; unsigned int retval; - if (!work_on_cpu(cpu, read_measured_perf_ctrs, &cur)) + if (!work_on_cpu(cpu, read_measured_perf_ctrs, &readin)) return 0; + cur.aperf.whole = readin.aperf.whole - + per_cpu(drv_data, cpu)->saved_aperf; + cur.mperf.whole = readin.mperf.whole - + per_cpu(drv_data, cpu)->saved_mperf; + per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole; + per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole; + #ifdef __i386__ /* * We dont want to do 64 bit divide with 32 bit kernel -- cgit v0.10.2 From db954b5898dd3ef3ef93f4144158ea8f97deb058 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 6 Apr 2009 18:51:29 -0700 Subject: x86 ACPI: Add support for Always Running APIC timer Add support for Always Running APIC timer, CPUID_0x6_EAX_Bit2. This bit means the APIC timer continues to run even when CPU is in deep C-states. The advantage is that we can use LAPIC timer on these CPUs always, and there is no need for "slow to read and program" external timers (HPET/PIT) and the timer broadcast logic and related code in C-state entry and exit. Signed-off-by: Venkatesh Pallipadi Acked-by: H. Peter Anvin Signed-off-by: Len Brown diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 0beba0d..bb83b1c 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -154,6 +154,7 @@ * CPUID levels like 0x6, 0xA etc */ #define X86_FEATURE_IDA (7*32+ 0) /* Intel Dynamic Acceleration */ +#define X86_FEATURE_ARAT (7*32+ 1) /* Always Running APIC Timer */ /* Virtualization flags: Linux defined */ #define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */ diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 098ec84..f287092 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -431,6 +431,12 @@ static void __cpuinit setup_APIC_timer(void) { struct clock_event_device *levt = &__get_cpu_var(lapic_events); + if (cpu_has(¤t_cpu_data, X86_FEATURE_ARAT)) { + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP; + /* Make LAPIC timer preferrable over percpu HPET */ + lapic_clockevent.rating = 150; + } + memcpy(levt, &lapic_clockevent, sizeof(*levt)); levt->cpumask = cpumask_of(smp_processor_id()); diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index 8220ae6..c965e52 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -31,6 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 }, + { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006 }, { 0, 0, 0, 0 } }; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 4e6e758..6fe1214 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -145,6 +145,9 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr, struct acpi_processor_power *pwr = &pr->power; u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2; + if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) + return; + /* * Check, if one of the previous states already marked the lapic * unstable -- cgit v0.10.2 From b35346fd25f3c8c0b6afeb778f8c4f41c5703c84 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 7 Apr 2009 17:11:15 -0700 Subject: sh: Provide cpumask_of_pcibus() to fix NUMA build. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h index a3f2395..8489a09 100644 --- a/arch/sh/include/asm/topology.h +++ b/arch/sh/include/asm/topology.h @@ -37,8 +37,11 @@ #define pcibus_to_node(bus) ((void)(bus), -1) #define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ CPU_MASK_ALL : \ - node_to_cpumask(pcibus_to_node(bus)) \ - ) + node_to_cpumask(pcibus_to_node(bus))) +#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL_PTR : \ + cpumask_of_node(pcibus_to_node(bus))) + #endif #include -- cgit v0.10.2 From 52ce67f157f8c5623524dc6c5b2ddd6a0d2aa774 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 7 Apr 2009 21:58:07 -0500 Subject: powerpc/mm: Fix compile warning arch/powerpc/mm/tlb_nohash.c: In function 'flush_tlb_mm': arch/powerpc/mm/tlb_nohash.c:128: warning: unused variable 'cpu_mask' Signed-off-by: Kumar Gala diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 7af7297..ad2eb4d 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -125,7 +125,6 @@ static void do_flush_tlb_page_ipi(void *param) void flush_tlb_mm(struct mm_struct *mm) { - cpumask_t cpu_mask; unsigned int pid; preempt_disable(); -- cgit v0.10.2 From 8d82ffd15e59febf2c597067a777526958b7f769 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Tue, 7 Apr 2009 10:20:56 +0200 Subject: powerpc: Document new FSL I2C bindings and cleanup This patch documents the new bindings for the MPC I2C bus driver. Furthermore, it removes obsolete FSL device related definitions for I2C. Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt index d0ab33e..b6d2e21 100644 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -7,8 +7,10 @@ Required properties : Recommended properties : - - compatible : Should be "fsl-i2c" for parts compatible with - Freescale I2C specifications. + - compatible : compatibility list with 2 entries, the first should + be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor, + e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one + should be "fsl-i2c". - interrupts : where a is the interrupt number and b is a field that represents an encoding of the sense and level information for the interrupt. This should be encoded based on @@ -16,17 +18,31 @@ Recommended properties : controller you have. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - - dfsrr : boolean; if defined, indicates that this I2C device has - a digital filter sampling rate register - - fsl5200-clocking : boolean; if defined, indicated that this device - uses the FSL 5200 clocking mechanism. - -Example : - i2c@3000 { - interrupt-parent = <40000>; - interrupts = <1b 3>; - reg = <3000 18>; - device_type = "i2c"; - compatible = "fsl-i2c"; - dfsrr; + - fsl,preserve-clocking : boolean; if defined, the clock settings + from the bootloader are preserved (not touched). + - clock-frequency : desired I2C bus clock frequency in Hz. + +Examples : + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + cell-index = <0>; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,preserve-clocking; }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + clock-frequency = <400000>; + }; + diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index f2a78b5..43fc95d 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -43,10 +43,6 @@ * */ -/* Flags related to I2C device features */ -#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001 -#define FSL_I2C_DEV_CLOCK_5200 0x00000002 - enum fsl_usb2_operating_modes { FSL_USB2_MPH_HOST, FSL_USB2_DR_HOST, -- cgit v0.10.2 From bd4e6c18ae02a492094621072e540df02e866f61 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 25 Mar 2009 19:20:10 +0000 Subject: [WATCHDOG] i6300esb.c: Cleanup Cleanup to keep checkpatch.pl happy. Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index 2dbe835..cfbb01c 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -52,10 +52,10 @@ #define ESB_LOCK_REG 0x68 /* WDT lock register */ /* Memory mapped registers */ -#define ESB_TIMER1_REG BASEADDR + 0x00 /* Timer1 value after each reset */ -#define ESB_TIMER2_REG BASEADDR + 0x04 /* Timer2 value after each reset */ -#define ESB_GINTSR_REG BASEADDR + 0x08 /* General Interrupt Status Register */ -#define ESB_RELOAD_REG BASEADDR + 0x0c /* Reload register */ +#define ESB_TIMER1_REG (BASEADDR + 0x00)/* Timer1 value after each reset */ +#define ESB_TIMER2_REG (BASEADDR + 0x04)/* Timer2 value after each reset */ +#define ESB_GINTSR_REG (BASEADDR + 0x08)/* General Interrupt Status Register */ +#define ESB_RELOAD_REG (BASEADDR + 0x0c)/* Reload register */ /* Lock register bits */ #define ESB_WDT_FUNC (0x01 << 2) /* Watchdog functionality */ @@ -143,7 +143,7 @@ static int esb_timer_stop(void) spin_unlock(&esb_lock); /* Returns 0 if the timer was disabled, non-zero otherwise */ - return (val & 0x01); + return val & 0x01; } static void esb_timer_keepalive(void) -- cgit v0.10.2 From 31838d9dac17dce6d68d985fd28c10d7a756dc4d Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 25 Mar 2009 19:14:45 +0000 Subject: [WATCHDOG] i6300esb.c: Fix the GETSTATUS and GETBOOTSTATUS ioctls. The WDIOC_GETSTATUS and WDIOC_GETBOOTSTATUS should return WDIOF_* flags (and not counter values, ...) Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index cfbb01c..8a0ef65 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -68,6 +68,7 @@ #define ESB_WDT_INTTYPE (0x11 << 0) /* Interrupt type on timer1 timeout */ /* Reload register bits */ +#define ESB_WDT_TIMEOUT (0x01 << 9) /* Watchdog timed out */ #define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */ /* Magic constants */ @@ -87,7 +88,6 @@ static struct platform_device *esb_platform_device; /* 30 sec default heartbeat (1 < heartbeat < 2*1023) */ #define WATCHDOG_HEARTBEAT 30 static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ - module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1 2 * 0x03ff) { + heartbeat = WATCHDOG_HEARTBEAT; printk(KERN_INFO PFX "heartbeat value must be 1 Date: Fri, 20 Feb 2009 19:44:59 +0100 Subject: [WATCHDOG] orion5x_wdt: Add shutdown callback, use watchdog ping function * Added a callback to disable the watchdog on shutdown. * Use a separate ping function to reduce the number of register accesses if the watchdog is already enabled and just needs to be reloaded. * Minor cleanup of function names. Signed-off-by: Thomas Reitmayr Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c index e81441f..7529616 100644 --- a/drivers/watchdog/orion5x_wdt.c +++ b/drivers/watchdog/orion5x_wdt.c @@ -42,7 +42,17 @@ static unsigned int wdt_tclk; static unsigned long wdt_status; static spinlock_t wdt_lock; -static void wdt_enable(void) +static void orion5x_wdt_ping(void) +{ + spin_lock(&wdt_lock); + + /* Reload watchdog duration */ + writel(wdt_tclk * heartbeat, WDT_VAL); + + spin_unlock(&wdt_lock); +} + +static void orion5x_wdt_enable(void) { u32 reg; @@ -69,7 +79,7 @@ static void wdt_enable(void) spin_unlock(&wdt_lock); } -static void wdt_disable(void) +static void orion5x_wdt_disable(void) { u32 reg; @@ -101,7 +111,7 @@ static int orion5x_wdt_open(struct inode *inode, struct file *file) if (test_and_set_bit(WDT_IN_USE, &wdt_status)) return -EBUSY; clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - wdt_enable(); + orion5x_wdt_enable(); return nonseekable_open(inode, file); } @@ -122,18 +132,28 @@ static ssize_t orion5x_wdt_write(struct file *file, const char *data, set_bit(WDT_OK_TO_CLOSE, &wdt_status); } } - wdt_enable(); + orion5x_wdt_ping(); } return len; } -static struct watchdog_info ident = { +static int orion5x_wdt_settimeout(int new_time) +{ + if ((new_time <= 0) || (new_time > wdt_max_duration)) + return -EINVAL; + + /* Set new watchdog time to be used when + * orion5x_wdt_enable() or orion5x_wdt_ping() is called. */ + heartbeat = new_time; + return 0; +} + +static const struct watchdog_info ident = { .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "Orion5x Watchdog", }; - static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { @@ -152,7 +172,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd, break; case WDIOC_KEEPALIVE: - wdt_enable(); + orion5x_wdt_ping(); ret = 0; break; @@ -161,12 +181,11 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd, if (ret) break; - if (time <= 0 || time > wdt_max_duration) { + if (orion5x_wdt_settimeout(time)) { ret = -EINVAL; break; } - heartbeat = time; - wdt_enable(); + orion5x_wdt_ping(); /* Fall through */ case WDIOC_GETTIMEOUT: @@ -187,7 +206,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd, static int orion5x_wdt_release(struct inode *inode, struct file *file) { if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) - wdt_disable(); + orion5x_wdt_disable(); else printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " "timer will not stop\n"); @@ -230,7 +249,7 @@ static int __devinit orion5x_wdt_probe(struct platform_device *pdev) orion5x_wdt_miscdev.parent = &pdev->dev; wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk; - if (heartbeat <= 0 || heartbeat > wdt_max_duration) + if (orion5x_wdt_settimeout(heartbeat)) heartbeat = wdt_max_duration; ret = misc_register(&orion5x_wdt_miscdev); @@ -247,7 +266,7 @@ static int __devexit orion5x_wdt_remove(struct platform_device *pdev) int ret; if (test_bit(WDT_IN_USE, &wdt_status)) { - wdt_disable(); + orion5x_wdt_disable(); clear_bit(WDT_IN_USE, &wdt_status); } @@ -258,9 +277,16 @@ static int __devexit orion5x_wdt_remove(struct platform_device *pdev) return ret; } +static void orion5x_wdt_shutdown(struct platform_device *pdev) +{ + if (test_bit(WDT_IN_USE, &wdt_status)) + orion5x_wdt_disable(); +} + static struct platform_driver orion5x_wdt_driver = { .probe = orion5x_wdt_probe, .remove = __devexit_p(orion5x_wdt_remove), + .shutdown = orion5x_wdt_shutdown, .driver = { .owner = THIS_MODULE, .name = "orion5x_wdt", @@ -285,10 +311,11 @@ MODULE_AUTHOR("Sylver Bruneau "); MODULE_DESCRIPTION("Orion5x Processor Watchdog"); module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds"); +MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds"); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v0.10.2 From b8f75b0d79671cb53d94e4ddd1db89502a7dc90e Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Tue, 31 Mar 2009 15:46:57 +0300 Subject: [WATCHDOG] remove ARM26 sections Removes ARM26 sections from Kconfig and Makefile, because ARM26 is long gone. Signed-off-by: Paulius Zaleckas Acked-by: Russell King Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 6302414..5eb8f21 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -240,8 +240,6 @@ config ORION5X_WATCHDOG To compile this driver as a module, choose M here: the module will be called orion5x_wdt. -# ARM26 Architecture - # AVR32 Architecture config AT32AP700X_WDT diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 806b3eb..7f8c56b 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -42,8 +42,6 @@ obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o -# ARM26 Architecture - # AVR32 Architecture obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o -- cgit v0.10.2 From 47dec7c6c48a12bdacdf5f935f10f44e66d9c98c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 28 Mar 2009 00:26:26 +0100 Subject: [WATCHDOG] at91rm9200_wdt.c: move probe function to .devinit.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A pointer to at91wdt_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König Cc: Andrew Victor Cc: Russell King Cc: Jean-Christophe PLAGNIOL-VILLARD Cc: Ilpo Jarvinen Cc: Andrew Morton Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index e35d545..29e52c2 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -197,7 +197,7 @@ static struct miscdevice at91wdt_miscdev = { .fops = &at91wdt_fops, }; -static int __init at91wdt_probe(struct platform_device *pdev) +static int __devinit at91wdt_probe(struct platform_device *pdev) { int res; @@ -214,7 +214,7 @@ static int __init at91wdt_probe(struct platform_device *pdev) return 0; } -static int __exit at91wdt_remove(struct platform_device *pdev) +static int __devexit at91wdt_remove(struct platform_device *pdev) { int res; @@ -252,7 +252,7 @@ static int at91wdt_resume(struct platform_device *pdev) static struct platform_driver at91wdt_driver = { .probe = at91wdt_probe, - .remove = __exit_p(at91wdt_remove), + .remove = __devexit_p(at91wdt_remove), .shutdown = at91wdt_shutdown, .suspend = at91wdt_suspend, .resume = at91wdt_resume, -- cgit v0.10.2 From c98d58e00d8562520c9a69e688f007b860faebaa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 28 Mar 2009 00:26:45 +0100 Subject: [WATCHDOG] ks8695_wdt.c: move probe function to .devinit.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A pointer to ks8695wdt_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König Cc: Alexey Dobriyan Cc: Alan Cox Cc: Andrew Morton Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index 74c92d3..ae38321 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -221,7 +221,7 @@ static struct miscdevice ks8695wdt_miscdev = { .fops = &ks8695wdt_fops, }; -static int __init ks8695wdt_probe(struct platform_device *pdev) +static int __devinit ks8695wdt_probe(struct platform_device *pdev) { int res; @@ -238,7 +238,7 @@ static int __init ks8695wdt_probe(struct platform_device *pdev) return 0; } -static int __exit ks8695wdt_remove(struct platform_device *pdev) +static int __devexit ks8695wdt_remove(struct platform_device *pdev) { int res; @@ -276,7 +276,7 @@ static int ks8695wdt_resume(struct platform_device *pdev) static struct platform_driver ks8695wdt_driver = { .probe = ks8695wdt_probe, - .remove = __exit_p(ks8695wdt_remove), + .remove = __devexit_p(ks8695wdt_remove), .shutdown = ks8695wdt_shutdown, .suspend = ks8695wdt_suspend, .resume = ks8695wdt_resume, -- cgit v0.10.2 From 0e3912c75f42986c17d955542247bf04c6eef738 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 28 Mar 2009 00:26:56 +0100 Subject: [WATCHDOG] omap_wdt.c: move probe function to .devinit.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A pointer to omap_wdt_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König Cc: Alan Cox Cc: Felipe Balbi Cc: George G. Davis Cc: Andrew Morton Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index aa5ad6e..f271385 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -258,7 +258,7 @@ static const struct file_operations omap_wdt_fops = { .release = omap_wdt_release, }; -static int __init omap_wdt_probe(struct platform_device *pdev) +static int __devinit omap_wdt_probe(struct platform_device *pdev) { struct resource *res, *mem; struct omap_wdt_dev *wdev; @@ -367,7 +367,7 @@ static void omap_wdt_shutdown(struct platform_device *pdev) omap_wdt_disable(wdev); } -static int omap_wdt_remove(struct platform_device *pdev) +static int __devexit omap_wdt_remove(struct platform_device *pdev) { struct omap_wdt_dev *wdev = platform_get_drvdata(pdev); struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -426,7 +426,7 @@ static int omap_wdt_resume(struct platform_device *pdev) static struct platform_driver omap_wdt_driver = { .probe = omap_wdt_probe, - .remove = omap_wdt_remove, + .remove = __devexit_p(omap_wdt_remove), .shutdown = omap_wdt_shutdown, .suspend = omap_wdt_suspend, .resume = omap_wdt_resume, -- cgit v0.10.2 From 59cc1dd97ca9ac0363ef2f770901fbd86e2b970a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 7 Apr 2009 23:53:26 -0700 Subject: Input: i8042 - add HP DV9700 to the noloop list Reported-by: Kenneth Crudup Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 6fa2def..83ed2d5 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -151,6 +151,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "01"), }, }, + { + .ident = "HP DV9700", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Rev 1"), + }, + }, { } }; -- cgit v0.10.2 From 0ce49d6da993adf8b17b7f3ed9805ade14a6a6f3 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 8 Apr 2009 01:22:36 -0700 Subject: qla1280: Fix off-by-some error in firmware loading. We were calculating the wrong address for the start of the data. Signed-off-by: David Woodhouse Tested-by: Jeremy Higdon diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 351b56c..d030db9 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -1663,7 +1663,7 @@ qla1280_load_firmware_pio(struct scsi_qla_host *ha) /* Load RISC code. */ risc_address = ha->fwstart; - fw_data = (const __le16 *)&fw->data[4]; + fw_data = (const __le16 *)&fw->data[6]; risc_code_size = (fw->size - 6) / 2; for (i = 0; i < risc_code_size; i++) { @@ -1722,7 +1722,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha) /* Load RISC code. */ risc_address = ha->fwstart; - fw_data = (const __le16 *)&fw->data[4]; + fw_data = (const __le16 *)&fw->data[6]; risc_code_size = (fw->size - 6) / 2; dprintk(1, "%s: DMA RISC code (%i) words\n", -- cgit v0.10.2 From f876d346e3807647b1de411de6a86c44821896ca Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 8 Apr 2009 14:05:43 +0900 Subject: tracing: append a comma to INIT_FTRACE_GRAPH Impact: dont break future extensions of INIT_TASK While not a problem right now, due to lack of a comma, build fails if elements are appended to INIT_TASK() macro in development code: arch/x86/kernel/init_task.c:33: error: request for member `XXXXXXXXXX' in something not a structure or union arch/x86/kernel/init_task.c:33: error: initializer element is not constant arch/x86/kernel/init_task.c:33: error: (near initialization for `init_task.ret_stack') make[1]: *** [arch/x86/kernel/init_task.o] Error 1 make: *** [arch/x86/kernel] Error 2 Signed-off-by: Tetsuo Handa Cc: srostedt@redhat.com LKML-Reference: <200904080505.n3855hcn017109@www262.sakura.ne.jp> Signed-off-by: Ingo Molnar diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index da5405d..ff112a8 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -357,7 +357,7 @@ struct ftrace_graph_ret { #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* for init task */ -#define INIT_FTRACE_GRAPH .ret_stack = NULL +#define INIT_FTRACE_GRAPH .ret_stack = NULL, /* * Stack of return addresses for functions -- cgit v0.10.2 From 6bbc0b08db0750c2564578bd1be909bc8f7dee1a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Apr 2009 00:54:27 -0700 Subject: sparc64: get_cells() can't be marked __init Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index b4a12c9..27381f1 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -99,8 +99,7 @@ static inline u64 of_read_addr(const u32 *cell, int size) return r; } -static void __init get_cells(struct device_node *dp, - int *addrc, int *sizec) +static void get_cells(struct device_node *dp, int *addrc, int *sizec) { if (addrc) *addrc = of_n_addr_cells(dp); -- cgit v0.10.2 From 19ab6db66ce1b32de54ecb474f16ade3247f8323 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Apr 2009 00:47:44 -0700 Subject: sparc64: Fix section mismatch warnings in power driver. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c index ae88f06..e2a045c 100644 --- a/arch/sparc/kernel/power.c +++ b/arch/sparc/kernel/power.c @@ -23,7 +23,7 @@ static irqreturn_t power_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init has_button_interrupt(unsigned int irq, struct device_node *dp) +static int __devinit has_button_interrupt(unsigned int irq, struct device_node *dp) { if (irq == 0xffffffff) return 0; -- cgit v0.10.2 From 9a2ed5cc9ef6cb60abd3ea66d7be549d8023581a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Apr 2009 01:03:58 -0700 Subject: sparc64: Fix section mismatch warnings in PCI controller drivers. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c index 9462b68..d53f45b 100644 --- a/arch/sparc/kernel/pci_fire.c +++ b/arch/sparc/kernel/pci_fire.c @@ -409,8 +409,8 @@ static void pci_fire_hw_init(struct pci_pbm_info *pbm) upa_writeq(~(u64)0, pbm->pbm_regs + FIRE_PEC_IENAB); } -static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, u32 portid) +static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op, u32 portid) { const struct linux_prom64_registers *regs; struct device_node *dp = op->node; diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c index 3b34344..142b9d6 100644 --- a/arch/sparc/kernel/pci_psycho.c +++ b/arch/sparc/kernel/pci_psycho.c @@ -365,8 +365,8 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void __init psycho_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void __devinit psycho_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { pbm_config_busmastering(pbm); pbm->is_66mhz_capable = 0; @@ -482,8 +482,8 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm, #define PSYCHO_MEMSPACE_B 0x180000000UL #define PSYCHO_MEMSPACE_SIZE 0x07fffffffUL -static void __init psycho_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, int is_pbm_a) +static void __devinit psycho_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op, int is_pbm_a) { psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO); psycho_pbm_strbuf_init(pbm, is_pbm_a); diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c index 713257b..ba6fbeb 100644 --- a/arch/sparc/kernel/pci_sabre.c +++ b/arch/sparc/kernel/pci_sabre.c @@ -402,8 +402,8 @@ static void apb_init(struct pci_bus *sabre_bus) } } -static void __init sabre_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { static int once; @@ -442,8 +442,8 @@ static void __init sabre_scan_bus(struct pci_pbm_info *pbm, sabre_register_error_handlers(pbm); } -static void __init sabre_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op) +static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op) { psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE); pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR; diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index 0ef0ab3..5db5ebe 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -545,8 +545,8 @@ static const struct dma_ops sun4v_dma_ops = { .sync_sg_for_cpu = dma_4v_sync_sg_for_cpu, }; -static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { struct property *prop; struct device_node *dp; @@ -559,8 +559,8 @@ static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm, /* XXX register error interrupt handlers XXX */ } -static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm, - struct iommu *iommu) +static unsigned long __devinit probe_existing_entries(struct pci_pbm_info *pbm, + struct iommu *iommu) { struct iommu_arena *arena = &iommu->arena; unsigned long i, cnt = 0; @@ -587,7 +587,7 @@ static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm, return cnt; } -static int __init pci_sun4v_iommu_init(struct pci_pbm_info *pbm) +static int __devinit pci_sun4v_iommu_init(struct pci_pbm_info *pbm) { static const u32 vdma_default[] = { 0x80000000, 0x80000000 }; struct iommu *iommu = pbm->iommu; @@ -889,8 +889,8 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm) } #endif /* !(CONFIG_PCI_MSI) */ -static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, u32 devhandle) +static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op, u32 devhandle) { struct device_node *dp = op->node; int err; diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 2c8dfeb..c30dc9a 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -70,8 +70,8 @@ extern struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES]; #define MAX_BANKS 32 -static struct linux_prom64_registers pavail[MAX_BANKS] __initdata; -static int pavail_ents __initdata; +static struct linux_prom64_registers pavail[MAX_BANKS] __devinitdata; +static int pavail_ents __devinitdata; static int cmp_p64(const void *a, const void *b) { @@ -1841,7 +1841,7 @@ void __init paging_init(void) printk("Booting Linux...\n"); } -int __init page_in_phys_avail(unsigned long paddr) +int __devinit page_in_phys_avail(unsigned long paddr) { int i; -- cgit v0.10.2 From 7816238a539bf56311f04e7ff17076f66d5c902a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Apr 2009 00:45:51 -0700 Subject: sparc: Fix section mismatch warnings in cs4231 sound driver. Signed-off-by: David S. Miller diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c index 7d93fa7..8d13d93 100644 --- a/sound/sparc/cs4231.c +++ b/sound/sparc/cs4231.c @@ -703,7 +703,7 @@ static int snd_cs4231_timer_stop(struct snd_timer *timer) return 0; } -static void __init snd_cs4231_init(struct snd_cs4231 *chip) +static void __devinit snd_cs4231_init(struct snd_cs4231 *chip) { unsigned long flags; @@ -1020,7 +1020,7 @@ static snd_pcm_uframes_t snd_cs4231_capture_pointer( return bytes_to_frames(substream->runtime, ptr); } -static int __init snd_cs4231_probe(struct snd_cs4231 *chip) +static int __devinit snd_cs4231_probe(struct snd_cs4231 *chip) { unsigned long flags; int i; @@ -1219,7 +1219,7 @@ static struct snd_pcm_ops snd_cs4231_capture_ops = { .pointer = snd_cs4231_capture_pointer, }; -static int __init snd_cs4231_pcm(struct snd_card *card) +static int __devinit snd_cs4231_pcm(struct snd_card *card) { struct snd_cs4231 *chip = card->private_data; struct snd_pcm *pcm; @@ -1248,7 +1248,7 @@ static int __init snd_cs4231_pcm(struct snd_card *card) return 0; } -static int __init snd_cs4231_timer(struct snd_card *card) +static int __devinit snd_cs4231_timer(struct snd_card *card) { struct snd_cs4231 *chip = card->private_data; struct snd_timer *timer; @@ -1499,7 +1499,7 @@ static int snd_cs4231_put_double(struct snd_kcontrol *kcontrol, .private_value = (left_reg) | ((right_reg) << 8) | ((shift_left) << 16) | \ ((shift_right) << 19) | ((mask) << 24) | ((invert) << 22) } -static struct snd_kcontrol_new snd_cs4231_controls[] __initdata = { +static struct snd_kcontrol_new snd_cs4231_controls[] __devinitdata = { CS4231_DOUBLE("PCM Playback Switch", 0, CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1), CS4231_DOUBLE("PCM Playback Volume", 0, CS4231_LEFT_OUTPUT, @@ -1538,7 +1538,7 @@ CS4231_SINGLE("Line Out Switch", 0, CS4231_PIN_CTRL, 6, 1, 1), CS4231_SINGLE("Headphone Out Switch", 0, CS4231_PIN_CTRL, 7, 1, 1) }; -static int __init snd_cs4231_mixer(struct snd_card *card) +static int __devinit snd_cs4231_mixer(struct snd_card *card) { struct snd_cs4231 *chip = card->private_data; int err, idx; @@ -1559,7 +1559,7 @@ static int __init snd_cs4231_mixer(struct snd_card *card) static int dev; -static int __init cs4231_attach_begin(struct snd_card **rcard) +static int __devinit cs4231_attach_begin(struct snd_card **rcard) { struct snd_card *card; struct snd_cs4231 *chip; @@ -1590,7 +1590,7 @@ static int __init cs4231_attach_begin(struct snd_card **rcard) return 0; } -static int __init cs4231_attach_finish(struct snd_card *card) +static int __devinit cs4231_attach_finish(struct snd_card *card) { struct snd_cs4231 *chip = card->private_data; int err; @@ -1794,9 +1794,9 @@ static struct snd_device_ops snd_cs4231_sbus_dev_ops = { .dev_free = snd_cs4231_sbus_dev_free, }; -static int __init snd_cs4231_sbus_create(struct snd_card *card, - struct of_device *op, - int dev) +static int __devinit snd_cs4231_sbus_create(struct snd_card *card, + struct of_device *op, + int dev) { struct snd_cs4231 *chip = card->private_data; int err; @@ -1960,9 +1960,9 @@ static struct snd_device_ops snd_cs4231_ebus_dev_ops = { .dev_free = snd_cs4231_ebus_dev_free, }; -static int __init snd_cs4231_ebus_create(struct snd_card *card, - struct of_device *op, - int dev) +static int __devinit snd_cs4231_ebus_create(struct snd_card *card, + struct of_device *op, + int dev) { struct snd_cs4231 *chip = card->private_data; int err; -- cgit v0.10.2 From f5d378ace9a5bd08cef344df096ea0c871e99c18 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Apr 2009 01:08:09 -0700 Subject: serial: sunsu: sunsu_kbd_ms_init needs to be __devinit Signed-off-by: David S. Miller diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index a4dc79b1..47c6837 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1178,7 +1178,7 @@ static struct uart_driver sunsu_reg = { .major = TTY_MAJOR, }; -static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up) +static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up) { int quot, baud; #ifdef CONFIG_SERIO -- cgit v0.10.2 From 01c4538158051768ecb7953396d10af8ae8a2518 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Apr 2009 01:05:22 -0700 Subject: sparc64: add_node_ranges() must be __init Signed-off-by: David S. Miller diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index c30dc9a..f26a352 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -968,7 +968,7 @@ int of_node_to_nid(struct device_node *dp) return nid; } -static void add_node_ranges(void) +static void __init add_node_ranges(void) { int i; -- cgit v0.10.2 From 018ef96969098487ea3fdabd904d775a4cd93975 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Apr 2009 03:55:30 -0700 Subject: sparc: Hook up sys_preadv and sys_pwritev Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index 031f038..b8eb71e 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -392,8 +392,10 @@ #define __NR_pipe2 321 #define __NR_inotify_init1 322 #define __NR_accept4 323 +#define __NR_preadv 324 +#define __NR_pwritev 325 -#define NR_SYSCALLS 324 +#define NR_SYSCALLS 326 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index dccc95d..00ec3b1 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -81,4 +81,4 @@ sys_call_table: /*305*/ .long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait /*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate /*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 +/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index a8000b1..82b5bf8 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -82,7 +82,7 @@ sys_call_table32: .word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait /*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate .word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 +/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv, compat_sys_pwritev #endif /* CONFIG_COMPAT */ @@ -156,4 +156,4 @@ sys_call_table: .word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait /*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate .word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 +/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev -- cgit v0.10.2 From aa07573b2bd0fee5a7537cb663fbb2de60278801 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 8 Apr 2009 14:12:47 +0200 Subject: ide: Fix host drivers that need IRQF_SHARED commit 255115fb35f80735c21a1cbe9809e9795a3af26e ("ide: allow host drivers to specify IRQ flags") added irq_flags fields to struct ide_port_info and struct ide_host. Drivers can now set ide_port_info.irq_flags = IRQF_SHARED, while init_irq() passes ide_host.irq_flags to request_irq(). Unfortunately ide_host.irq_flags is never set, causing (on ARAnyM): | Uniform Multi-Platform E-IDE driver | ide: Falcon IDE controller | Probing IDE interface ide0... | hda: Sarge m68k, ATA DISK drive | init_irq: sa = 0 | ide0: disabled, unable to get IRQ 15 | ide0: failed to initialize IDE interface | ide0: disabling port Solve this by copying ide_port_info.irq_flags to ide_host.irq_flags in ide_host_alloc(). This bug probably affects the following IDE host drivers: - buddha - delkin_cb - falconide - gayle - ide-cs - macide - q40ide - scc_pata - sgiioc4 Signed-off-by: Geert Uytterhoeven Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index d8c1c3e..c1ef8c8 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1314,6 +1314,7 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) host->get_lock = d->get_lock; host->release_lock = d->release_lock; host->host_flags = d->host_flags; + host->irq_flags = d->irq_flags; } return host; -- cgit v0.10.2 From d18812070efc658267f7573eec5ce7810128bfeb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 8 Apr 2009 14:12:48 +0200 Subject: ide: falconide/q40ide - Use __ide_mm_{in,out}sw() for data Both of commits f94116aeec7a299640dd692128e1d22178affa8d ("ide: cleanup ") and 15a453a955f89f6545118770c669b52e925368bd ("ide: include only when needed") break falconide: | Uniform Multi-Platform E-IDE driver | ide: Falcon IDE controller | Probing IDE interface ide0... | hda: Sarge m68k, ATA DISK drive | ide0 at 0xfff00000 on irq 15 (serialized) | ide-gd driver 1.18 | hda: max request size: 128KiB | hda: 2118816 sectors (1084 MB) w/256KiB Cache, CHS=2102/16/63 | hda:<4>hda: lost interrupt This happens because falconide relies on {in,out}sw() being redefined in , as included by , which is no longer the case. Use __ide_mm_{in,out}sw() from instead, just like ide_{in,out}put_data() do. The same problem seems to exist in q40ide. Signed-off-by: Geert Uytterhoeven Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c index afa2af9..0e2df67 100644 --- a/drivers/ide/falconide.c +++ b/drivers/ide/falconide.c @@ -20,6 +20,7 @@ #include #include #include +#include #define DRV_NAME "falconide" @@ -67,8 +68,10 @@ static void falconide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, { unsigned long data_addr = drive->hwif->io_ports.data_addr; - if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) - return insw(data_addr, buf, (len + 1) / 2); + if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { + __ide_mm_insw(data_addr, buf, (len + 1) / 2); + return; + } raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } @@ -78,8 +81,10 @@ static void falconide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, { unsigned long data_addr = drive->hwif->io_ports.data_addr; - if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) - return outsw(data_addr, buf, (len + 1) / 2); + if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { + __ide_mm_outsw(data_addr, buf, (len + 1) / 2); + return; + } raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c index d007e7f..c793466 100644 --- a/drivers/ide/q40ide.c +++ b/drivers/ide/q40ide.c @@ -16,6 +16,8 @@ #include #include +#include + /* * Bases of the IDE interfaces */ @@ -77,8 +79,10 @@ static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, { unsigned long data_addr = drive->hwif->io_ports.data_addr; - if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) - return insw(data_addr, buf, (len + 1) / 2); + if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { + __ide_mm_insw(data_addr, buf, (len + 1) / 2); + return; + } raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } @@ -88,8 +92,10 @@ static void q40ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, { unsigned long data_addr = drive->hwif->io_ports.data_addr; - if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) - return outsw(data_addr, buf, (len + 1) / 2); + if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { + __ide_mm_outsw(data_addr, buf, (len + 1) / 2); + return; + } raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } -- cgit v0.10.2 From edafcf73dca2f9531c78eec130df84a8c9654b3b Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Wed, 8 Apr 2009 14:12:49 +0200 Subject: ide: remove wmb() from ide-dma-sff.c and scc_pata.c This patch: o replaces "mask" variable in ide_dma_end() with #define. o removes use of wmb() in ide-dma-sff.c and scc_pata.c. o is not tested - I don't have (or want) the HW. Signed-off-by: Grant Grundler Cc: KOBAYASHI Yoshitake Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-dma-sff.c b/drivers/ide/ide-dma-sff.c index 16fc46e..e4cdf78 100644 --- a/drivers/ide/ide-dma-sff.c +++ b/drivers/ide/ide-dma-sff.c @@ -277,8 +277,6 @@ void ide_dma_start(ide_drive_t *drive) dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); outb(dma_cmd | ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD); } - - wmb(); } EXPORT_SYMBOL_GPL(ide_dma_start); @@ -286,7 +284,7 @@ EXPORT_SYMBOL_GPL(ide_dma_start); int ide_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - u8 dma_stat = 0, dma_cmd = 0, mask; + u8 dma_stat = 0, dma_cmd = 0; /* stop DMA */ if (hwif->host_flags & IDE_HFLAG_MMIO) { @@ -304,11 +302,10 @@ int ide_dma_end(ide_drive_t *drive) /* clear INTR & ERROR bits */ ide_dma_sff_write_status(hwif, dma_stat | ATA_DMA_ERR | ATA_DMA_INTR); - wmb(); +#define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR) /* verify good DMA status */ - mask = ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR; - if ((dma_stat & mask) != ATA_DMA_INTR) + if ((dma_stat & CHECK_DMA_MASK) != ATA_DMA_INTR) return 0x10 | dma_stat; return 0; } diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 6d8dbd9..55e48db 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -337,7 +337,6 @@ static void scc_dma_start(ide_drive_t *drive) /* start DMA */ scc_ide_outb(dma_cmd | 1, hwif->dma_base); - wmb(); } static int __scc_dma_end(ide_drive_t *drive) @@ -354,7 +353,6 @@ static int __scc_dma_end(ide_drive_t *drive) /* clear the INTR & ERROR bits */ scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); /* verify good DMA status */ - wmb(); return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; } -- cgit v0.10.2 From 253275c52c8f5848df63f140977ef19800f2dfca Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 8 Apr 2009 14:12:49 +0200 Subject: tx4939ide: remove wmb() * define CHECK_DMA_MASK * remove use of wmb() Reported-by: Grant Grundler Reviewed-by: Grant Grundler Signed-off-by: Atsushi Nemoto diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 0040a9a..2e27fcd 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -327,15 +327,15 @@ static int tx4939ide_dma_end(ide_drive_t *drive) /* read and clear the INTR & ERROR bits */ dma_stat = tx4939ide_clear_dma_status(base); - wmb(); +#define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR) /* verify good DMA status */ - if ((dma_stat & (ATA_DMA_INTR | ATA_DMA_ERR | ATA_DMA_ACTIVE)) == 0 && + if ((dma_stat & CHECK_DMA_MASK) == 0 && (ctl & (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST)) == (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST)) /* INT_IDE lost... bug? */ return 0; - return ((dma_stat & (ATA_DMA_INTR | ATA_DMA_ERR | ATA_DMA_ACTIVE)) != + return ((dma_stat & CHECK_DMA_MASK) != ATA_DMA_INTR) ? 0x10 | dma_stat : 0; } -- cgit v0.10.2 From add4d9a9838fc9a3b3d1886b6ce96cfc08386e9b Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:12:50 +0200 Subject: ide-h8300: remove mm_{inw|outw}() Remove two no longer used functions that I've overlooked... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c index dac9a6d..8a064d7 100644 --- a/drivers/ide/ide-h8300.c +++ b/drivers/ide/ide-h8300.c @@ -22,28 +22,6 @@ (r); \ }) -static void mm_outw(u16 d, unsigned long a) -{ - __asm__("mov.b %w0,r2h\n\t" - "mov.b %x0,r2l\n\t" - "mov.w r2,@%1" - : - :"r"(d),"r"(a) - :"er2"); -} - -static u16 mm_inw(unsigned long a) -{ - register u16 r __asm__("er0"); - __asm__("mov.w @%1,r2\n\t" - "mov.b r2l,%x0\n\t" - "mov.b r2h,%w0" - :"=r"(r) - :"r"(a) - :"er2"); - return r; -} - static void h8300_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; -- cgit v0.10.2 From 7636e455ea00755b863340570eb47a3652624da3 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:12:51 +0200 Subject: at91_ide: remove custom tf_{read|load}() methods Since tf_{read|load}() methods of this driver have now become identical to their standard counterparts using MMIO accesses, there's no need to override those anymore... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index 8eda552..c035bb0 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c @@ -185,80 +185,6 @@ static void ide_mm_outb(u8 value, unsigned long port) writeb(value, (void __iomem *) port); } -static void at91_ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) - HIHI = 0xFF; - - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - ide_mm_outb(tf->hob_feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE) - ide_mm_outb(tf->feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT) - ide_mm_outb(tf->nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL) - ide_mm_outb(tf->lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM) - ide_mm_outb(tf->lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH) - ide_mm_outb(tf->lbah, io_ports->lbah_addr); - - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) - ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr); -} - -static void at91_ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - - /* be sure we're looking at the low order bits */ - ide_mm_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) - tf->error = ide_mm_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = ide_mm_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = ide_mm_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = ide_mm_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = ide_mm_inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = ide_mm_inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - ide_mm_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) - tf->hob_error = ide_mm_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = ide_mm_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = ide_mm_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = ide_mm_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = ide_mm_inb(io_ports->lbah_addr); - } -} - static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) { struct ide_timing *timing; @@ -284,8 +210,8 @@ static const struct ide_tp_ops at91_ide_tp_ops = { .write_devctl = ide_write_devctl, .dev_select = ide_dev_select, - .tf_load = at91_ide_tf_load, - .tf_read = at91_ide_tf_read, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, .input_data = at91_ide_input_data, .output_data = at91_ide_output_data, -- cgit v0.10.2 From cfd30daa0d6cbdb0bbc2bc40a10097231b23b204 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:12:51 +0200 Subject: ide-h8300: remove custom tf_{read|load}() methods Since tf_{read|load}() methods of this driver have now become identical to their standard counterparts using I/O port accesses, there's no need to override those anymore... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c index 8a064d7..c06ebdc 100644 --- a/drivers/ide/ide-h8300.c +++ b/drivers/ide/ide-h8300.c @@ -22,81 +22,6 @@ (r); \ }) -static void h8300_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) - HIHI = 0xFF; - - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - outb(tf->hob_feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - outb(tf->hob_nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - outb(tf->hob_lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - outb(tf->hob_lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - outb(tf->hob_lbah, io_ports->lbah_addr); - - if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE) - outb(tf->feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT) - outb(tf->nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL) - outb(tf->lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM) - outb(tf->lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH) - outb(tf->lbah, io_ports->lbah_addr); - - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) - outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); -} - -static void h8300_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - - /* be sure we're looking at the low order bits */ - outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) - tf->error = inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) - tf->hob_error = inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = inb(io_ports->lbah_addr); - } -} - static void mm_outsw(unsigned long addr, void *buf, u32 len) { unsigned short *bp = (unsigned short *)buf; @@ -130,8 +55,8 @@ static const struct ide_tp_ops h8300_tp_ops = { .write_devctl = ide_write_devctl, .dev_select = ide_dev_select, - .tf_load = h8300_tf_load, - .tf_read = h8300_tf_read, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, .input_data = h8300_input_data, .output_data = h8300_output_data, -- cgit v0.10.2 From 8e59bfde31e69fb1f630ec0efd24a50c5a51b0bf Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 8 Apr 2009 14:12:51 +0200 Subject: ide-cd: move status checking into the IRQ handler There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 35729a4..a4afd90 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -271,29 +271,18 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) * 1: if the request will be going through error recovery. * 2: if the request should be ended. */ -static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) +static int cdrom_decode_status(ide_drive_t *drive, u8 stat) { ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; - int stat, err, sense_key; - - /* check for errors */ - stat = hwif->tp_ops->read_status(hwif); - - if (stat_ret) - *stat_ret = stat; - - if (OK_STAT(stat, good_stat, BAD_R_STAT)) - return 0; + int err, sense_key; /* get the IDE error register */ err = ide_read_error(drive); sense_key = err >> 4; - ide_debug_log(IDE_DBG_RQ, "stat: 0x%x, good_stat: 0x%x, cmd[0]: 0x%x, " - "rq->cmd_type: 0x%x, err: 0x%x", - stat, good_stat, rq->cmd[0], rq->cmd_type, - err); + ide_debug_log(IDE_DBG_RQ, "cmd[0]: 0x%x, rq->cmd_type: 0x%x, err: 0x%x", + rq->cmd[0], rq->cmd_type, err); if (blk_sense_request(rq)) { /* @@ -624,12 +613,12 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) struct ide_cmd *cmd = &hwif->cmd; struct request *rq = hwif->rq; ide_expiry_t *expiry = NULL; - int dma_error = 0, dma, stat, thislen, uptodate = 0; + int dma_error = 0, dma, thislen, uptodate = 0; int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc, nsectors; int sense = blk_sense_request(rq); unsigned int timeout; u16 len; - u8 ireason; + u8 ireason, stat; ide_debug_log(IDE_DBG_PC, "cmd[0]: 0x%x, write: 0x%x", rq->cmd[0], write); @@ -648,11 +637,16 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) } } - rc = cdrom_decode_status(drive, 0, &stat); - if (rc) { - if (rc == 2) - goto out_end; - return ide_stopped; + /* check status */ + stat = hwif->tp_ops->read_status(hwif); + + if (!OK_STAT(stat, 0, BAD_R_STAT)) { + rc = cdrom_decode_status(drive, stat); + if (rc) { + if (rc == 2) + goto out_end; + return ide_stopped; + } } /* using dma, transfer is complete now */ -- cgit v0.10.2 From 805ec58ad7fd1f65eeb75ed38f11bd08fbd3b988 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 8 Apr 2009 14:12:52 +0200 Subject: ide-cd: carve out an ide_cd_breathe()-helper for fs write requests There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index a4afd90..7bbdeb7 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -265,7 +265,43 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) cdrom_analyze_sense_data(drive, NULL, sense); } + /* + * Allow the drive 5 seconds to recover; some devices will return NOT_READY + * while flushing data from cache. + * + * returns: 0 failed (write timeout expired) + * 1 success + */ +static int ide_cd_breathe(ide_drive_t *drive, struct request *rq) +{ + + struct cdrom_info *info = drive->driver_data; + + if (!rq->errors) + info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY; + + rq->errors = 1; + + if (time_after(jiffies, info->write_timeout)) + return 0; + else { + struct request_queue *q = drive->queue; + unsigned long flags; + + /* + * take a breather relying on the unplug timer to kick us again + */ + + spin_lock_irqsave(q->queue_lock, flags); + blk_plug_device(q); + spin_unlock_irqrestore(q->queue_lock, flags); + + return 1; + } +} + +/** * Returns: * 0: if the request should be continued. * 1: if the request will be going through error recovery. @@ -348,36 +384,11 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) /* fail the request */ printk(KERN_ERR PFX "%s: tray open\n", drive->name); - do_end_request = 1; } else { - struct cdrom_info *info = drive->driver_data; - - /* - * Allow the drive 5 seconds to recover, some - * devices will return this error while flushing - * data from cache. - */ - if (!rq->errors) - info->write_timeout = jiffies + - ATAPI_WAIT_WRITE_BUSY; - rq->errors = 1; - if (time_after(jiffies, info->write_timeout)) - do_end_request = 1; - else { - struct request_queue *q = drive->queue; - unsigned long flags; - - /* - * take a breather relying on the unplug - * timer to kick us again - */ - spin_lock_irqsave(q->queue_lock, flags); - blk_plug_device(q); - spin_unlock_irqrestore(q->queue_lock, flags); - + if (ide_cd_breathe(drive, rq)) return 1; - } } + do_end_request = 1; } else if (sense_key == UNIT_ATTENTION) { /* media change */ cdrom_saw_media_change(drive); -- cgit v0.10.2 From d68bab503e64e87c464c5a27a56877a04e4404b5 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 8 Apr 2009 14:12:52 +0200 Subject: tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read} Now tx493[89]ide_tf_{load,read} do not contain word I/O operations. They are endian-free now. Signed-off-by: Atsushi Nemoto Cc: Sergei Shtylyov , Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index 4cb79c4..e33d764 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -72,91 +72,6 @@ static void tx4938ide_set_pio_mode(ide_drive_t *drive, const u8 pio) #ifdef __BIG_ENDIAN /* custom iops (independent from SWAP_IO_SPACE) */ -static u8 tx4938ide_inb(unsigned long port) -{ - return __raw_readb((void __iomem *)port); -} - -static void tx4938ide_outb(u8 value, unsigned long port) -{ - __raw_writeb(value, (void __iomem *)port); -} - -static void tx4938ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - u8 HIHI = cmd->tf_flags & IDE_TFLAG_LBA48 ? 0xE0 : 0xEF; - - if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) - HIHI = 0xFF; - - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - tx4938ide_outb(tf->hob_feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - tx4938ide_outb(tf->hob_nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - tx4938ide_outb(tf->hob_lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - tx4938ide_outb(tf->hob_lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - tx4938ide_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE) - tx4938ide_outb(tf->feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT) - tx4938ide_outb(tf->nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL) - tx4938ide_outb(tf->lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM) - tx4938ide_outb(tf->lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH) - tx4938ide_outb(tf->lbah, io_ports->lbah_addr); - - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) - tx4938ide_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); -} - -static void tx4938ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - - /* be sure we're looking at the low order bits */ - tx4938ide_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) - tf->error = tx4938ide_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = tx4938ide_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = tx4938ide_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = tx4938ide_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = tx4938ide_inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = tx4938ide_inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - tx4938ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) - tf->hob_error = tx4938ide_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = tx4938ide_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = tx4938ide_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = tx4938ide_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = tx4938ide_inb(io_ports->lbah_addr); - } -} - static void tx4938ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { @@ -190,8 +105,8 @@ static const struct ide_tp_ops tx4938ide_tp_ops = { .write_devctl = ide_write_devctl, .dev_select = ide_dev_select, - .tf_load = tx4938ide_tf_load, - .tf_read = tx4938ide_tf_read, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, .input_data = tx4938ide_input_data_swap, .output_data = tx4938ide_output_data_swap, diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 2e27fcd..f9b6878 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -434,96 +434,17 @@ static void tx4939ide_tf_load_fixup(ide_drive_t *drive) tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl); } -#ifdef __BIG_ENDIAN - -/* custom iops (independent from SWAP_IO_SPACE) */ -static u8 tx4939ide_inb(unsigned long port) -{ - return __raw_readb((void __iomem *)port); -} - -static void tx4939ide_outb(u8 value, unsigned long port) -{ - __raw_writeb(value, (void __iomem *)port); -} - static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - u8 HIHI = cmd->tf_flags & IDE_TFLAG_LBA48 ? 0xE0 : 0xEF; - - if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) - HIHI = 0xFF; - - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - tx4939ide_outb(tf->hob_feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - tx4939ide_outb(tf->hob_nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - tx4939ide_outb(tf->hob_lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - tx4939ide_outb(tf->hob_lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - tx4939ide_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE) - tx4939ide_outb(tf->feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT) - tx4939ide_outb(tf->nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL) - tx4939ide_outb(tf->lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM) - tx4939ide_outb(tf->lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH) - tx4939ide_outb(tf->lbah, io_ports->lbah_addr); - - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) { - tx4939ide_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); + ide_tf_load(drive, cmd); + + if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) tx4939ide_tf_load_fixup(drive); - } } -static void tx4939ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - - /* be sure we're looking at the low order bits */ - tx4939ide_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) - tf->error = tx4939ide_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = tx4939ide_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = tx4939ide_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = tx4939ide_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = tx4939ide_inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = tx4939ide_inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - tx4939ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) - tf->hob_error = tx4939ide_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = tx4939ide_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = tx4939ide_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = tx4939ide_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = tx4939ide_inb(io_ports->lbah_addr); - } -} +#ifdef __BIG_ENDIAN +/* custom iops (independent from SWAP_IO_SPACE) */ static void tx4939ide_input_data_swap(ide_drive_t *drive, struct request *rq, void *buf, unsigned int len) { @@ -558,7 +479,7 @@ static const struct ide_tp_ops tx4939ide_tp_ops = { .dev_select = ide_dev_select, .tf_load = tx4939ide_tf_load, - .tf_read = tx4939ide_tf_read, + .tf_read = ide_tf_read, .input_data = tx4939ide_input_data_swap, .output_data = tx4939ide_output_data_swap, @@ -566,14 +487,6 @@ static const struct ide_tp_ops tx4939ide_tp_ops = { #else /* __LITTLE_ENDIAN */ -static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_tf_load(drive, cmd); - - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) - tx4939ide_tf_load_fixup(drive); -} - static const struct ide_tp_ops tx4939ide_tp_ops = { .exec_command = ide_exec_command, .read_status = ide_read_status, -- cgit v0.10.2 From aa24d9783d1dcba1a25451dadb6fb0ee092bd8df Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 8 Apr 2009 14:12:52 +0200 Subject: tx4939ide: Fix tx4939ide_{in,out}put_data_swap argument The commit adb1af9 ("ide: pass command instead of request to ide_pio_datablock()") missed tx4939ide driver. Signed-off-by: Atsushi Nemoto Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index f9b6878..bee9461 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -445,7 +445,7 @@ static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) #ifdef __BIG_ENDIAN /* custom iops (independent from SWAP_IO_SPACE) */ -static void tx4939ide_input_data_swap(ide_drive_t *drive, struct request *rq, +static void tx4939ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long port = drive->hwif->io_ports.data_addr; @@ -457,7 +457,7 @@ static void tx4939ide_input_data_swap(ide_drive_t *drive, struct request *rq, __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2)); } -static void tx4939ide_output_data_swap(ide_drive_t *drive, struct request *rq, +static void tx4939ide_output_data_swap(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long port = drive->hwif->io_ports.data_addr; -- cgit v0.10.2 From 1597cd82504174c816c39cefabacd8a27b993ce0 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Wed, 8 Apr 2009 14:12:53 +0200 Subject: ide: remove unused #include Remove unused #include in drivers/ide/at91_ide.c. Signed-off-by: Huang Weiyi Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index c035bb0..4f3725d 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c @@ -20,7 +20,6 @@ * */ -#include #include #include #include -- cgit v0.10.2 From dfa4411cc3a690011cab90e9a536938795366cf9 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 8 Apr 2009 14:12:53 +0200 Subject: ide-cd: respect REQ_QUIET for fs requests in cdrom_decode_status() There should be no functional change resulting from this patch. Suggested-by: Bartlomiej Zolnierkiewicz Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 7bbdeb7..c84abd6 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -312,6 +312,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; int err, sense_key; + u8 quiet = rq->cmd_flags & REQ_QUIET; /* get the IDE error register */ err = ide_read_error(drive); @@ -354,7 +355,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * drive doesn't have that capability. * cdrom_log_sense() knows this! */ - } else if (!(rq->cmd_flags & REQ_QUIET)) { + } else if (!quiet) { /* otherwise, print an error */ ide_dump_status(drive, "packet command error", stat); } @@ -382,7 +383,8 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) cdrom_saw_media_change(drive); /* fail the request */ - printk(KERN_ERR PFX "%s: tray open\n", + if (!quiet) + printk(KERN_ERR PFX "%s: tray open\n", drive->name); } else { if (ide_cd_breathe(drive, rq)) @@ -405,19 +407,23 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * No point in retrying after an illegal request or data * protect error. */ - ide_dump_status(drive, "command error", stat); + if (!quiet) + ide_dump_status(drive, "command error", stat); do_end_request = 1; } else if (sense_key == MEDIUM_ERROR) { /* * No point in re-trying a zillion times on a bad * sector. If we got here the error is not correctable. */ - ide_dump_status(drive, "media error (bad sector)", - stat); + if (!quiet) + ide_dump_status(drive, "media error " + "(bad sector)", stat); do_end_request = 1; } else if (sense_key == BLANK_CHECK) { /* disk appears blank ?? */ - ide_dump_status(drive, "media error (blank)", stat); + if (!quiet) + ide_dump_status(drive, "media error (blank)", + stat); do_end_request = 1; } else if ((err & ~ATA_ABORTED) != 0) { /* go to the default handler for other errors */ -- cgit v0.10.2 From 98036abf31994244cb5772ecc291f4293a52c20b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 8 Apr 2009 14:12:53 +0200 Subject: ide-cd: update debugging support Signed-off-by: Borislav Petkov [bart: extracted from "ide-cd: cleanup cdrom_decode_status" patch] Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index c84abd6..e946f0e 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -318,8 +318,9 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) err = ide_read_error(drive); sense_key = err >> 4; - ide_debug_log(IDE_DBG_RQ, "cmd[0]: 0x%x, rq->cmd_type: 0x%x, err: 0x%x", - rq->cmd[0], rq->cmd_type, err); + ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, rq->cmd_type: 0x%x, err: 0x%x, " + "stat 0x%x", + rq->cmd[0], rq->cmd_type, err, stat); if (blk_sense_request(rq)) { /* @@ -637,8 +638,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) u16 len; u8 ireason, stat; - ide_debug_log(IDE_DBG_PC, "cmd[0]: 0x%x, write: 0x%x", - rq->cmd[0], write); + ide_debug_log(IDE_DBG_PC, "cmd: 0x%x, write: 0x%x", rq->cmd[0], write); /* check for errors */ dma = drive->dma; -- cgit v0.10.2 From e01f251fd09fa7cb3d352eac7de17bb5d5bd1f9d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 8 Apr 2009 14:12:53 +0200 Subject: ide-cd: convert cdrom_decode_status() to use switch statements Based on earlier work by Borislav Petkov. Convert cdrom_decode_status() to use switch statements in preparation to unify handling of fs and pc requests. While at it: - remove superfluous comments and do minor CodingStyle fixups There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index e946f0e..43db330 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -340,15 +340,14 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) if (blk_pc_request(rq) && !rq->errors) rq->errors = SAM_STAT_CHECK_CONDITION; - /* check for tray open */ - if (sense_key == NOT_READY) { + switch (sense_key) { + case NOT_READY: cdrom_saw_media_change(drive); - } else if (sense_key == UNIT_ATTENTION) { - /* check for media change */ + break; + case UNIT_ATTENTION: cdrom_saw_media_change(drive); return 0; - } else if (sense_key == ILLEGAL_REQUEST && - rq->cmd[0] == GPCMD_START_STOP_UNIT) { + case ILLEGAL_REQUEST: /* * Don't print error message for this condition-- * SFF8090i indicates that 5/24/00 is the correct @@ -356,9 +355,13 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * drive doesn't have that capability. * cdrom_log_sense() knows this! */ - } else if (!quiet) { - /* otherwise, print an error */ - ide_dump_status(drive, "packet command error", stat); + if (rq->cmd[0] == GPCMD_START_STOP_UNIT) + break; + /* fall-through */ + default: + if (!quiet) + ide_dump_status(drive, "packet command error", + stat); } rq->cmd_flags |= REQ_FAILED; @@ -378,12 +381,11 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) if (blk_noretry_request(rq)) do_end_request = 1; - if (sense_key == NOT_READY) { - /* tray open */ + switch (sense_key) { + case NOT_READY: if (rq_data_dir(rq) == READ) { cdrom_saw_media_change(drive); - /* fail the request */ if (!quiet) printk(KERN_ERR PFX "%s: tray open\n", drive->name); @@ -392,8 +394,8 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) return 1; } do_end_request = 1; - } else if (sense_key == UNIT_ATTENTION) { - /* media change */ + break; + case UNIT_ATTENTION: cdrom_saw_media_change(drive); /* @@ -402,8 +404,9 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) */ if (++rq->errors > ERROR_MAX) do_end_request = 1; - } else if (sense_key == ILLEGAL_REQUEST || - sense_key == DATA_PROTECT) { + break; + case ILLEGAL_REQUEST: + case DATA_PROTECT: /* * No point in retrying after an illegal request or data * protect error. @@ -411,7 +414,8 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) if (!quiet) ide_dump_status(drive, "command error", stat); do_end_request = 1; - } else if (sense_key == MEDIUM_ERROR) { + break; + case MEDIUM_ERROR: /* * No point in re-trying a zillion times on a bad * sector. If we got here the error is not correctable. @@ -420,19 +424,22 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) ide_dump_status(drive, "media error " "(bad sector)", stat); do_end_request = 1; - } else if (sense_key == BLANK_CHECK) { + break; + case BLANK_CHECK: /* disk appears blank ?? */ if (!quiet) ide_dump_status(drive, "media error (blank)", stat); do_end_request = 1; - } else if ((err & ~ATA_ABORTED) != 0) { - /* go to the default handler for other errors */ - ide_error(drive, "cdrom_decode_status", stat); - return 1; - } else if ((++rq->errors > ERROR_MAX)) { - /* we've racked up too many retries, abort */ - do_end_request = 1; + break; + default: + if (err & ~ATA_ABORTED) { + /* go to the default handler for other errors */ + ide_error(drive, "cdrom_decode_status", stat); + return 1; + } else if (++rq->errors > ERROR_MAX) + /* we've racked up too many retries, abort */ + do_end_request = 1; } /* -- cgit v0.10.2 From 1920c48d796ce7240ba267cb0be85c51895258f8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 8 Apr 2009 14:12:54 +0200 Subject: ide-cd: unify handling of fs and pc requests in cdrom_decode_status() Based on earlier work by Borislav Petkov. Unify handling of fs and pc requests in cdrom_decode_status(). While at it: - remove unreachable code The only change in functionality is that for pc requests more detailed error message will be printed for following sense keys: * ILLEGAL_REQUEST * DATA_PROTECT * MEDIUM_ERROR * BLANK_CHECK Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 43db330..ffbaa6d 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -330,8 +330,8 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) */ rq->cmd_flags |= REQ_FAILED; return 2; - } else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) { - /* All other functions, except for READ. */ + } else { + int do_end_request = 0; /* * if we have an error, pass back CHECK_CONDITION as the @@ -340,53 +340,16 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) if (blk_pc_request(rq) && !rq->errors) rq->errors = SAM_STAT_CHECK_CONDITION; - switch (sense_key) { - case NOT_READY: - cdrom_saw_media_change(drive); - break; - case UNIT_ATTENTION: - cdrom_saw_media_change(drive); - return 0; - case ILLEGAL_REQUEST: - /* - * Don't print error message for this condition-- - * SFF8090i indicates that 5/24/00 is the correct - * response to a request to close the tray if the - * drive doesn't have that capability. - * cdrom_log_sense() knows this! - */ - if (rq->cmd[0] == GPCMD_START_STOP_UNIT) - break; - /* fall-through */ - default: - if (!quiet) - ide_dump_status(drive, "packet command error", - stat); - } - - rq->cmd_flags |= REQ_FAILED; - - /* - * instead of playing games with moving completions around, - * remove failed request completely and end it when the - * request sense has completed - */ - goto end_request; - - } else if (blk_fs_request(rq)) { - int do_end_request = 0; - - /* handle errors from READ and WRITE requests */ - if (blk_noretry_request(rq)) do_end_request = 1; switch (sense_key) { case NOT_READY: - if (rq_data_dir(rq) == READ) { + if (blk_fs_request(rq) == 0 || + rq_data_dir(rq) == READ) { cdrom_saw_media_change(drive); - if (!quiet) + if (blk_fs_request(rq) && !quiet) printk(KERN_ERR PFX "%s: tray open\n", drive->name); } else { @@ -398,6 +361,8 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) case UNIT_ATTENTION: cdrom_saw_media_change(drive); + if (blk_fs_request(rq) == 0) + return 0; /* * Arrange to retry the request but be sure to give up * if we've retried too many times. @@ -406,6 +371,16 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) do_end_request = 1; break; case ILLEGAL_REQUEST: + /* + * Don't print error message for this condition-- + * SFF8090i indicates that 5/24/00 is the correct + * response to a request to close the tray if the + * drive doesn't have that capability. + * cdrom_log_sense() knows this! + */ + if (rq->cmd[0] == GPCMD_START_STOP_UNIT) + break; + /* fall-through */ case DATA_PROTECT: /* * No point in retrying after an illegal request or data @@ -433,6 +408,8 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) do_end_request = 1; break; default: + if (blk_fs_request(rq) == 0) + break; if (err & ~ATA_ABORTED) { /* go to the default handler for other errors */ ide_error(drive, "cdrom_decode_status", stat); @@ -442,6 +419,11 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) do_end_request = 1; } + if (blk_fs_request(rq) == 0) { + rq->cmd_flags |= REQ_FAILED; + do_end_request = 1; + } + /* * End a request through request sense analysis when we have * sense data. We need this in order to perform end of media @@ -457,9 +439,6 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) if (stat & ATA_ERR) cdrom_queue_request_sense(drive, NULL, NULL); return 1; - } else { - blk_dump_rq_flags(rq, PFX "bad rq"); - return 2; } end_request: -- cgit v0.10.2 From 674f0ea111bc9bff1b4e4841d7da38933c5e3b59 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 8 Apr 2009 14:12:54 +0200 Subject: ide-cd: fix intendation in cdrom_decode_status() Based on earlier work by Borislav Petkov. Fix intendation in cdrom_decode_status(), no real code changes. While at it: - beautify comments There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ffbaa6d..3ce1eaf 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -311,7 +311,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) { ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; - int err, sense_key; + int err, sense_key, do_end_request = 0; u8 quiet = rq->cmd_flags & REQ_QUIET; /* get the IDE error register */ @@ -330,117 +330,108 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) */ rq->cmd_flags |= REQ_FAILED; return 2; - } else { - int do_end_request = 0; - - /* - * if we have an error, pass back CHECK_CONDITION as the - * scsi status byte - */ - if (blk_pc_request(rq) && !rq->errors) - rq->errors = SAM_STAT_CHECK_CONDITION; + } - if (blk_noretry_request(rq)) - do_end_request = 1; + /* if we have an error, pass CHECK_CONDITION as the SCSI status byte */ + if (blk_pc_request(rq) && !rq->errors) + rq->errors = SAM_STAT_CHECK_CONDITION; - switch (sense_key) { - case NOT_READY: - if (blk_fs_request(rq) == 0 || - rq_data_dir(rq) == READ) { - cdrom_saw_media_change(drive); + if (blk_noretry_request(rq)) + do_end_request = 1; - if (blk_fs_request(rq) && !quiet) - printk(KERN_ERR PFX "%s: tray open\n", - drive->name); - } else { - if (ide_cd_breathe(drive, rq)) - return 1; - } - do_end_request = 1; - break; - case UNIT_ATTENTION: + switch (sense_key) { + case NOT_READY: + if (blk_fs_request(rq) == 0 || rq_data_dir(rq) == READ) { cdrom_saw_media_change(drive); - if (blk_fs_request(rq) == 0) - return 0; - /* - * Arrange to retry the request but be sure to give up - * if we've retried too many times. - */ - if (++rq->errors > ERROR_MAX) - do_end_request = 1; - break; - case ILLEGAL_REQUEST: - /* - * Don't print error message for this condition-- - * SFF8090i indicates that 5/24/00 is the correct - * response to a request to close the tray if the - * drive doesn't have that capability. - * cdrom_log_sense() knows this! - */ - if (rq->cmd[0] == GPCMD_START_STOP_UNIT) - break; - /* fall-through */ - case DATA_PROTECT: - /* - * No point in retrying after an illegal request or data - * protect error. - */ - if (!quiet) - ide_dump_status(drive, "command error", stat); - do_end_request = 1; - break; - case MEDIUM_ERROR: - /* - * No point in re-trying a zillion times on a bad - * sector. If we got here the error is not correctable. - */ - if (!quiet) - ide_dump_status(drive, "media error " - "(bad sector)", stat); - do_end_request = 1; - break; - case BLANK_CHECK: - /* disk appears blank ?? */ - if (!quiet) - ide_dump_status(drive, "media error (blank)", - stat); - do_end_request = 1; - break; - default: - if (blk_fs_request(rq) == 0) - break; - if (err & ~ATA_ABORTED) { - /* go to the default handler for other errors */ - ide_error(drive, "cdrom_decode_status", stat); + if (blk_fs_request(rq) && !quiet) + printk(KERN_ERR PFX "%s: tray open\n", + drive->name); + } else { + if (ide_cd_breathe(drive, rq)) return 1; - } else if (++rq->errors > ERROR_MAX) - /* we've racked up too many retries, abort */ - do_end_request = 1; } + do_end_request = 1; + break; + case UNIT_ATTENTION: + cdrom_saw_media_change(drive); - if (blk_fs_request(rq) == 0) { - rq->cmd_flags |= REQ_FAILED; - do_end_request = 1; - } + if (blk_fs_request(rq) == 0) + return 0; /* - * End a request through request sense analysis when we have - * sense data. We need this in order to perform end of media - * processing. + * Arrange to retry the request but be sure to give up if we've + * retried too many times. */ - if (do_end_request) - goto end_request; - + if (++rq->errors > ERROR_MAX) + do_end_request = 1; + break; + case ILLEGAL_REQUEST: + /* + * Don't print error message for this condition -- SFF8090i + * indicates that 5/24/00 is the correct response to a request + * to close the tray if the drive doesn't have that capability. + * + * cdrom_log_sense() knows this! + */ + if (rq->cmd[0] == GPCMD_START_STOP_UNIT) + break; + /* fall-through */ + case DATA_PROTECT: /* - * If we got a CHECK_CONDITION status, queue - * a request sense command. + * No point in retrying after an illegal request or data + * protect error. */ - if (stat & ATA_ERR) - cdrom_queue_request_sense(drive, NULL, NULL); - return 1; + if (!quiet) + ide_dump_status(drive, "command error", stat); + do_end_request = 1; + break; + case MEDIUM_ERROR: + /* + * No point in re-trying a zillion times on a bad sector. + * If we got here the error is not correctable. + */ + if (!quiet) + ide_dump_status(drive, "media error " + "(bad sector)", stat); + do_end_request = 1; + break; + case BLANK_CHECK: + /* disk appears blank? */ + if (!quiet) + ide_dump_status(drive, "media error (blank)", + stat); + do_end_request = 1; + break; + default: + if (blk_fs_request(rq) == 0) + break; + if (err & ~ATA_ABORTED) { + /* go to the default handler for other errors */ + ide_error(drive, "cdrom_decode_status", stat); + return 1; + } else if (++rq->errors > ERROR_MAX) + /* we've racked up too many retries, abort */ + do_end_request = 1; } + if (blk_fs_request(rq) == 0) { + rq->cmd_flags |= REQ_FAILED; + do_end_request = 1; + } + + /* + * End a request through request sense analysis when we have sense data. + * We need this in order to perform end of media processing. + */ + if (do_end_request) + goto end_request; + + /* if we got a CHECK_CONDITION status, queue a request sense command */ + if (stat & ATA_ERR) + cdrom_queue_request_sense(drive, NULL, NULL); + return 1; + end_request: if (stat & ATA_ERR) { struct request_queue *q = drive->queue; -- cgit v0.10.2 From 60f85019c6c8c1aebf3485a313e0da094bc95d07 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:01 +0200 Subject: ide: replace IDE_TFLAG_* flags by IDE_VALID_* Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can then be turned from 32-bit into 8-bit one). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 12f4369..f0db4d3 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -319,7 +319,8 @@ static int do_drive_set_taskfiles(ide_drive_t *drive, /* convert GTF to taskfile */ memset(&cmd, 0, sizeof(cmd)); memcpy(&cmd.tf_array[7], gtf, REGS_PER_GTF); - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; err = ide_no_data_taskfile(drive, &cmd); if (err) { diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 3e43b88..a359323 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -257,8 +257,7 @@ void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM | - IDE_TFLAG_IN_NSECT; + cmd.valid.in.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | IDE_VALID_NSECT; drive->hwif->tp_ops->tf_read(drive, &cmd); @@ -439,12 +438,12 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_started; } -static void ide_init_packet_cmd(struct ide_cmd *cmd, u32 tf_flags, +static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf, u16 bcount, u8 dma) { - cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO; - cmd->tf_flags |= IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM | - IDE_TFLAG_OUT_FEATURE | tf_flags; + cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO; + cmd->valid.out.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | + IDE_VALID_FEATURE | valid_tf; cmd->tf.command = ATA_CMD_PACKET; cmd->tf.feature = dma; /* Use PIO/DMA */ cmd->tf.lbam = bcount & 0xff; @@ -456,7 +455,7 @@ static u8 ide_read_ireason(ide_drive_t *drive) struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_IN_NSECT; + cmd.valid.in.tf = IDE_VALID_NSECT; drive->hwif->tp_ops->tf_read(drive, &cmd); @@ -588,12 +587,12 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) ide_expiry_t *expiry = NULL; struct request *rq = hwif->rq; unsigned int timeout; - u32 tf_flags; u16 bcount; + u8 valid_tf; u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT); if (dev_is_idecd(drive)) { - tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL; + valid_tf = IDE_VALID_NSECT | IDE_VALID_LBAL; bcount = ide_cd_get_xferlen(rq); expiry = ide_cd_expiry; timeout = ATAPI_WAIT_PC; @@ -607,7 +606,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) pc->xferred = 0; pc->cur_pos = pc->buf; - tf_flags = IDE_TFLAG_OUT_DEVICE; + valid_tf = IDE_VALID_DEVICE; bcount = ((drive->media == ide_tape) ? pc->req_xfer : min(pc->req_xfer, 63 * 1024)); @@ -627,7 +626,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) : WAIT_TAPE_CMD; } - ide_init_packet_cmd(cmd, tf_flags, bcount, drive->dma); + ide_init_packet_cmd(cmd, valid_tf, bcount, drive->dma); (void)do_rw_taskfile(drive, cmd); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index c998cf8..235263e 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -97,7 +97,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, } memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; if (drive->dev_flags & IDE_DFLAG_LBA) { if (lba48) { @@ -116,7 +117,9 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->lbam = (u8)(block >> 8); tf->lbah = (u8)(block >> 16); - cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); + cmd.valid.out.hob = IDE_VALID_OUT_HOB; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + cmd.tf_flags |= IDE_TFLAG_LBA48; } else { tf->nsect = nsectors & 0xff; tf->lbal = block; @@ -220,9 +223,13 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) tf->command = ATA_CMD_READ_NATIVE_MAX; tf->device = ATA_LBA; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (lba48) - cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + if (lba48) { + cmd.valid.out.hob = IDE_VALID_OUT_HOB; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + cmd.tf_flags = IDE_TFLAG_LBA48; + } ide_no_data_taskfile(drive, &cmd); @@ -260,9 +267,13 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) } tf->device |= ATA_LBA; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (lba48) - cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + if (lba48) { + cmd.valid.out.hob = IDE_VALID_OUT_HOB; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + cmd.tf_flags = IDE_TFLAG_LBA48; + } ide_no_data_taskfile(drive, &cmd); @@ -395,8 +406,8 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) cmd->tf.command = ATA_CMD_FLUSH_EXT; else cmd->tf.command = ATA_CMD_FLUSH; - cmd->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE | - IDE_TFLAG_DYN; + cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd->tf_flags = IDE_TFLAG_DYN; cmd->protocol = ATA_PROT_NODATA; rq->cmd_type = REQ_TYPE_ATA_TASKFILE; @@ -457,7 +468,8 @@ static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect) cmd.tf.feature = feature; cmd.tf.nsect = nsect; cmd.tf.command = ATA_CMD_SET_FEATURES; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; return ide_no_data_taskfile(drive, &cmd); } @@ -533,7 +545,8 @@ static int do_idedisk_flushcache(ide_drive_t *drive) cmd.tf.command = ATA_CMD_FLUSH_EXT; else cmd.tf.command = ATA_CMD_FLUSH; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; return ide_no_data_taskfile(drive, &cmd); } @@ -715,7 +728,8 @@ static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk, memset(&cmd, 0, sizeof(cmd)); cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; ret = ide_no_data_taskfile(drive, &cmd); diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c index eaea3be..19f263b 100644 --- a/drivers/ide/ide-disk_proc.c +++ b/drivers/ide/ide-disk_proc.c @@ -13,7 +13,8 @@ static int smart_enable(ide_drive_t *drive) tf->lbam = ATA_SMART_LBAM_PASS; tf->lbah = ATA_SMART_LBAH_PASS; tf->command = ATA_CMD_SMART; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; return ide_no_data_taskfile(drive, &cmd); } @@ -29,7 +30,8 @@ static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) tf->lbam = ATA_SMART_LBAM_PASS; tf->lbah = ATA_SMART_LBAH_PASS; tf->command = ATA_CMD_SMART; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; cmd.protocol = ATA_PROT_PIO; return ide_raw_taskfile(drive, &cmd, buf, 1); diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 9cac281..8b0b2e9 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -91,6 +91,7 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) struct ide_io_ports *io_ports = &hwif->io_ports; struct ide_taskfile *tf = &cmd->tf; void (*tf_outb)(u8 addr, unsigned long port); + u8 valid = cmd->valid.out.hob; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; @@ -102,29 +103,31 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) HIHI = 0xFF; - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + if (valid & IDE_VALID_FEATURE) tf_outb(tf->hob_feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + if (valid & IDE_VALID_NSECT) tf_outb(tf->hob_nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + if (valid & IDE_VALID_LBAL) tf_outb(tf->hob_lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + if (valid & IDE_VALID_LBAM) tf_outb(tf->hob_lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + if (valid & IDE_VALID_LBAH) tf_outb(tf->hob_lbah, io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE) + valid = cmd->valid.out.tf; + + if (valid & IDE_VALID_FEATURE) tf_outb(tf->feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT) + if (valid & IDE_VALID_NSECT) tf_outb(tf->nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL) + if (valid & IDE_VALID_LBAL) tf_outb(tf->lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM) + if (valid & IDE_VALID_LBAM) tf_outb(tf->lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH) + if (valid & IDE_VALID_LBAH) tf_outb(tf->lbah, io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) + if (valid & IDE_VALID_DEVICE) tf_outb((tf->device & HIHI) | drive->select, io_ports->device_addr); } @@ -137,6 +140,7 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) struct ide_taskfile *tf = &cmd->tf; void (*tf_outb)(u8 addr, unsigned long port); u8 (*tf_inb)(unsigned long port); + u8 valid = cmd->valid.in.tf; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (mmio) { @@ -150,31 +154,33 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) /* be sure we're looking at the low order bits */ tf_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) + if (valid & IDE_VALID_ERROR) tf->error = tf_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) + if (valid & IDE_VALID_NSECT) tf->nsect = tf_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) + if (valid & IDE_VALID_LBAL) tf->lbal = tf_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) + if (valid & IDE_VALID_LBAM) tf->lbam = tf_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) + if (valid & IDE_VALID_LBAH) tf->lbah = tf_inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) + if (valid & IDE_VALID_DEVICE) tf->device = tf_inb(io_ports->device_addr); if (cmd->tf_flags & IDE_TFLAG_LBA48) { tf_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) + valid = cmd->valid.in.hob; + + if (valid & IDE_VALID_ERROR) tf->hob_error = tf_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + if (valid & IDE_VALID_NSECT) tf->hob_nsect = tf_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + if (valid & IDE_VALID_LBAL) tf->hob_lbal = tf_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + if (valid & IDE_VALID_LBAM) tf->hob_lbam = tf_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + if (valid & IDE_VALID_LBAH) tf->hob_lbah = tf_inb(io_ports->lbah_addr); } } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1deb6d2..99bb0a9 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -205,8 +205,9 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) return ide_stopped; } - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE | - IDE_TFLAG_CUSTOM_HANDLER; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.tf_flags = IDE_TFLAG_CUSTOM_HANDLER; do_rw_taskfile(drive, &cmd); diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index 7701427..b11df4b 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -141,11 +141,12 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg) tf->lbal = args[1]; tf->lbam = 0x4f; tf->lbah = 0xc2; - cmd.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT; + cmd.valid.out.tf = IDE_VALID_OUT_TF; + cmd.valid.in.tf = IDE_VALID_NSECT; } else { tf->nsect = args[1]; - cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_IN_NSECT; + cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; + cmd.valid.in.tf = IDE_VALID_NSECT; } tf->command = args[0]; cmd.protocol = args[3] ? ATA_PROT_PIO : ATA_PROT_NODATA; @@ -207,7 +208,8 @@ static int ide_task_ioctl(ide_drive_t *drive, unsigned long arg) memset(&cmd, 0, sizeof(cmd)); memcpy(&cmd.tf_array[7], &args[1], 6); cmd.tf.command = args[0]; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; err = ide_no_data_taskfile(drive, &cmd); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 27bb70d..0fdf0df 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -40,7 +40,7 @@ u8 ide_read_error(ide_drive_t *drive) struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_IN_ERROR; + cmd.valid.in.tf = IDE_VALID_ERROR; drive->hwif->tp_ops->tf_read(drive, &cmd); @@ -348,7 +348,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS); memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT; + cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; cmd.tf.feature = SETFEATURES_XFER; cmd.tf.nsect = speed; diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 217b7fd..c9ef77c 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -71,11 +71,12 @@ static void ide_dump_sector(ide_drive_t *drive) u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); memset(&cmd, 0, sizeof(cmd)); - if (lba48) - cmd.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_HOB_LBA | - IDE_TFLAG_LBA48; - else - cmd.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE; + if (lba48) { + cmd.valid.in.tf = IDE_VALID_LBA; + cmd.valid.in.hob = IDE_VALID_LBA; + cmd.tf_flags = IDE_TFLAG_LBA48; + } else + cmd.valid.in.tf = IDE_VALID_LBA | IDE_VALID_DEVICE; drive->hwif->tp_ops->tf_read(drive, &cmd); diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index 9490b44..310d03f 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -74,7 +74,8 @@ ide_startstop_t ide_do_park_unpark(ide_drive_t *drive, struct request *rq) tf->lbal = 0x4c; tf->lbam = 0x4e; tf->lbah = 0x55; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; } else /* cmd == REQ_UNPARK_HEADS */ tf->command = ATA_CMD_CHK_POWER; diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index bb7858e..0d8a151 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -163,7 +163,8 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; out_do_tf: - cmd->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd->valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; cmd->protocol = ATA_PROT_NODATA; return do_rw_taskfile(drive, cmd); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index c1ef8c8..6a98d7c 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -287,7 +287,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) memset(&cmd, 0, sizeof(cmd)); /* disable DMA & overlap */ - cmd.tf_flags = IDE_TFLAG_OUT_FEATURE; + cmd.valid.out.tf = IDE_VALID_FEATURE; tp_ops->tf_load(drive, &cmd); } @@ -340,7 +340,7 @@ static u8 ide_read_device(ide_drive_t *drive) struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); - cmd.tf_flags = IDE_TFLAG_IN_DEVICE; + cmd.valid.in.tf = IDE_VALID_DEVICE; drive->hwif->tp_ops->tf_read(drive, &cmd); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 10a88bf..3242698 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -204,8 +204,8 @@ static int set_xfer_rate (ide_drive_t *drive, int arg) cmd.tf.command = ATA_CMD_SET_FEATURES; cmd.tf.feature = SETFEATURES_XFER; cmd.tf.nsect = (u8)arg; - cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_IN_NSECT; + cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; + cmd.valid.in.tf = IDE_VALID_NSECT; err = ide_no_data_taskfile(drive, &cmd); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 243421c..dc84f8b 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -47,7 +47,8 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) cmd.tf.command = ATA_CMD_ID_ATA; else cmd.tf.command = ATA_CMD_ID_ATAPI; - cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; cmd.protocol = ATA_PROT_PIO; return ide_raw_taskfile(drive, &cmd, buf, 1); @@ -494,11 +495,14 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) memcpy(&cmd.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); - cmd.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE | - IDE_TFLAG_IN_TF; + cmd.valid.out.tf = IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_DEVICE | IDE_VALID_IN_TF; + cmd.tf_flags = IDE_TFLAG_IO_16BIT; - if (drive->dev_flags & IDE_DFLAG_LBA48) - cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB); + if (drive->dev_flags & IDE_DFLAG_LBA48) { + cmd.tf_flags |= IDE_TFLAG_LBA48; + cmd.valid.in.hob = IDE_VALID_IN_HOB; + } if (req_task->out_flags.all) { cmd.ftf_flags |= IDE_FTFLAG_FLAGGED; @@ -507,28 +511,28 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) cmd.ftf_flags |= IDE_FTFLAG_OUT_DATA; if (req_task->out_flags.b.nsector_hob) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT; + cmd.valid.out.hob |= IDE_VALID_NSECT; if (req_task->out_flags.b.sector_hob) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL; + cmd.valid.out.hob |= IDE_VALID_LBAL; if (req_task->out_flags.b.lcyl_hob) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM; + cmd.valid.out.hob |= IDE_VALID_LBAM; if (req_task->out_flags.b.hcyl_hob) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH; + cmd.valid.out.hob |= IDE_VALID_LBAH; if (req_task->out_flags.b.error_feature) - cmd.tf_flags |= IDE_TFLAG_OUT_FEATURE; + cmd.valid.out.tf |= IDE_VALID_FEATURE; if (req_task->out_flags.b.nsector) - cmd.tf_flags |= IDE_TFLAG_OUT_NSECT; + cmd.valid.out.tf |= IDE_VALID_NSECT; if (req_task->out_flags.b.sector) - cmd.tf_flags |= IDE_TFLAG_OUT_LBAL; + cmd.valid.out.tf |= IDE_VALID_LBAL; if (req_task->out_flags.b.lcyl) - cmd.tf_flags |= IDE_TFLAG_OUT_LBAM; + cmd.valid.out.tf |= IDE_VALID_LBAM; if (req_task->out_flags.b.hcyl) - cmd.tf_flags |= IDE_TFLAG_OUT_LBAH; + cmd.valid.out.tf |= IDE_VALID_LBAH; } else { - cmd.tf_flags |= IDE_TFLAG_OUT_TF; + cmd.valid.out.tf |= IDE_VALID_OUT_TF; if (cmd.tf_flags & IDE_TFLAG_LBA48) - cmd.tf_flags |= IDE_TFLAG_OUT_HOB; + cmd.valid.out.hob |= IDE_VALID_OUT_HOB; } if (req_task->in_flags.b.data) diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index 71a39fb..0208dd3 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -65,35 +65,38 @@ static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; struct ide_taskfile *tf = &cmd->tf; + u8 valid = cmd->valid.in.tf; /* be sure we're looking at the low order bits */ outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) + if (valid & IDE_VALID_ERROR) tf->error = inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) + if (valid & IDE_VALID_NSECT) tf->nsect = inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) + if (valid & IDE_VALID_LBAL) tf->lbal = inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) + if (valid & IDE_VALID_LBAM) tf->lbam = inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) + if (valid & IDE_VALID_LBAH) tf->lbah = inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) + if (valid & IDE_VALID_DEVICE) tf->device = superio_ide_inb(io_ports->device_addr); if (cmd->tf_flags & IDE_TFLAG_LBA48) { outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) + valid = cmd->valid.in.hob; + + if (valid & IDE_VALID_ERROR) tf->hob_error = inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + if (valid & IDE_VALID_NSECT) tf->hob_nsect = inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + if (valid & IDE_VALID_LBAL) tf->hob_lbal = inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + if (valid & IDE_VALID_LBAM) tf->hob_lbam = inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + if (valid & IDE_VALID_LBAH) tf->hob_lbah = inb(io_ports->lbah_addr); } } diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 55e48db..38a715e 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -649,34 +649,37 @@ static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; struct ide_taskfile *tf = &cmd->tf; + u8 valid = cmd->valid.out.hob; u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) HIHI = 0xFF; - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + if (valid & IDE_VALID_FEATURE) scc_ide_outb(tf->hob_feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + if (valid & IDE_VALID_NSECT) scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + if (valid & IDE_VALID_LBAL) scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + if (valid & IDE_VALID_LBAM) scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + if (valid & IDE_VALID_LBAH) scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE) + valid = cmd->valid.out.tf; + + if (valid & IDE_VALID_FEATURE) scc_ide_outb(tf->feature, io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT) + if (valid & IDE_VALID_NSECT) scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL) + if (valid & IDE_VALID_LBAL) scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM) + if (valid & IDE_VALID_LBAM) scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH) + if (valid & IDE_VALID_LBAH) scc_ide_outb(tf->lbah, io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) + if (valid & IDE_VALID_DEVICE) scc_ide_outb((tf->device & HIHI) | drive->select, io_ports->device_addr); } @@ -685,35 +688,38 @@ static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; struct ide_taskfile *tf = &cmd->tf; + u8 valid = cmd->valid.in.tf; /* be sure we're looking at the low order bits */ scc_ide_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_ERROR) + if (valid & IDE_VALID_ERROR) tf->error = scc_ide_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_NSECT) + if (valid & IDE_VALID_NSECT) tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAL) + if (valid & IDE_VALID_LBAL) tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAM) + if (valid & IDE_VALID_LBAM) tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_LBAH) + if (valid & IDE_VALID_LBAH) tf->lbah = scc_ide_inb(io_ports->lbah_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE) + if (valid & IDE_VALID_DEVICE) tf->device = scc_ide_inb(io_ports->device_addr); if (cmd->tf_flags & IDE_TFLAG_LBA48) { scc_ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR) + valid = cmd->valid.in.hob; + + if (valid & IDE_VALID_ERROR) tf->hob_error = scc_ide_inb(io_ports->feature_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + if (valid & IDE_VALID_NSECT) tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + if (valid & IDE_VALID_LBAL) tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + if (valid & IDE_VALID_LBAM) tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr); - if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + if (valid & IDE_VALID_LBAH) tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr); } } diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index bee9461..af8b0f6 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -438,7 +438,7 @@ static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { ide_tf_load(drive, cmd); - if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) + if (cmd->valid.out.tf & IDE_VALID_DEVICE) tx4939ide_tf_load_fixup(drive); } diff --git a/include/linux/ide.h b/include/linux/ide.h index a5d26f6..58951f5 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -240,65 +240,38 @@ typedef enum { } ide_startstop_t; enum { + IDE_VALID_ERROR = (1 << 1), + IDE_VALID_FEATURE = IDE_VALID_ERROR, + IDE_VALID_NSECT = (1 << 2), + IDE_VALID_LBAL = (1 << 3), + IDE_VALID_LBAM = (1 << 4), + IDE_VALID_LBAH = (1 << 5), + IDE_VALID_DEVICE = (1 << 6), + IDE_VALID_LBA = IDE_VALID_LBAL | + IDE_VALID_LBAM | + IDE_VALID_LBAH, + IDE_VALID_OUT_TF = IDE_VALID_FEATURE | + IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_IN_TF = IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF, + IDE_VALID_IN_HOB = IDE_VALID_ERROR | + IDE_VALID_NSECT | + IDE_VALID_LBA, +}; + +enum { IDE_TFLAG_LBA48 = (1 << 0), - IDE_TFLAG_OUT_HOB_FEATURE = (1 << 1), - IDE_TFLAG_OUT_HOB_NSECT = (1 << 2), - IDE_TFLAG_OUT_HOB_LBAL = (1 << 3), - IDE_TFLAG_OUT_HOB_LBAM = (1 << 4), - IDE_TFLAG_OUT_HOB_LBAH = (1 << 5), - IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE | - IDE_TFLAG_OUT_HOB_NSECT | - IDE_TFLAG_OUT_HOB_LBAL | - IDE_TFLAG_OUT_HOB_LBAM | - IDE_TFLAG_OUT_HOB_LBAH, - IDE_TFLAG_OUT_FEATURE = (1 << 6), - IDE_TFLAG_OUT_NSECT = (1 << 7), - IDE_TFLAG_OUT_LBAL = (1 << 8), - IDE_TFLAG_OUT_LBAM = (1 << 9), - IDE_TFLAG_OUT_LBAH = (1 << 10), - IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE | - IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_OUT_LBAL | - IDE_TFLAG_OUT_LBAM | - IDE_TFLAG_OUT_LBAH, - IDE_TFLAG_OUT_DEVICE = (1 << 11), - IDE_TFLAG_WRITE = (1 << 12), - IDE_TFLAG_CUSTOM_HANDLER = (1 << 13), - IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 14), - IDE_TFLAG_IN_HOB_ERROR = (1 << 15), - IDE_TFLAG_IN_HOB_NSECT = (1 << 16), - IDE_TFLAG_IN_HOB_LBAL = (1 << 17), - IDE_TFLAG_IN_HOB_LBAM = (1 << 18), - IDE_TFLAG_IN_HOB_LBAH = (1 << 19), - IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL | - IDE_TFLAG_IN_HOB_LBAM | - IDE_TFLAG_IN_HOB_LBAH, - IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_ERROR | - IDE_TFLAG_IN_HOB_NSECT | - IDE_TFLAG_IN_HOB_LBA, - IDE_TFLAG_IN_ERROR = (1 << 20), - IDE_TFLAG_IN_NSECT = (1 << 21), - IDE_TFLAG_IN_LBAL = (1 << 22), - IDE_TFLAG_IN_LBAM = (1 << 23), - IDE_TFLAG_IN_LBAH = (1 << 24), - IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL | - IDE_TFLAG_IN_LBAM | - IDE_TFLAG_IN_LBAH, - IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT | - IDE_TFLAG_IN_LBA, - IDE_TFLAG_IN_DEVICE = (1 << 25), - IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB | - IDE_TFLAG_IN_HOB, - IDE_TFLAG_TF = IDE_TFLAG_OUT_TF | - IDE_TFLAG_IN_TF, - IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE | - IDE_TFLAG_IN_DEVICE, + IDE_TFLAG_WRITE = (1 << 1), + IDE_TFLAG_CUSTOM_HANDLER = (1 << 2), + IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 3), /* force 16-bit I/O operations */ - IDE_TFLAG_IO_16BIT = (1 << 26), + IDE_TFLAG_IO_16BIT = (1 << 4), /* struct ide_cmd was allocated using kmalloc() */ - IDE_TFLAG_DYN = (1 << 27), - IDE_TFLAG_FS = (1 << 28), - IDE_TFLAG_MULTI_PIO = (1 << 29), + IDE_TFLAG_DYN = (1 << 5), + IDE_TFLAG_FS = (1 << 6), + IDE_TFLAG_MULTI_PIO = (1 << 7), }; enum { @@ -346,8 +319,16 @@ struct ide_cmd { struct ide_taskfile tf; u8 tf_array[14]; }; + + struct { + struct { + u8 tf; + u8 hob; + } out, in; + } valid; + + u8 tf_flags; u8 ftf_flags; /* for TASKFILE ioctl */ - u32 tf_flags; int protocol; int sg_nents; /* number of sg entries */ -- cgit v0.10.2 From 745483f10c6cefb303007c6873e2bfce54efa8ed Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:02 +0200 Subject: ide: simplify 'struct ide_taskfile' Make 'struct ide_taskfile' cover only 8 register values and thus put two such fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array' field from it. This required changing the prototype of ide_get_lba_addr() and ide_tf_dump(). Signed-off-by: Sergei Shtylyov [bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()] Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index f0db4d3..77f79d2 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -318,7 +318,7 @@ static int do_drive_set_taskfiles(ide_drive_t *drive, /* convert GTF to taskfile */ memset(&cmd, 0, sizeof(cmd)); - memcpy(&cmd.tf_array[7], gtf, REGS_PER_GTF); + memcpy(&cmd.tf.feature, gtf, REGS_PER_GTF); cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 235263e..a9fbe2c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -105,17 +105,19 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, pr_debug("%s: LBA=0x%012llx\n", drive->name, (unsigned long long)block); - tf->hob_nsect = (nsectors >> 8) & 0xff; - tf->hob_lbal = (u8)(block >> 24); - if (sizeof(block) != 4) { - tf->hob_lbam = (u8)((u64)block >> 32); - tf->hob_lbah = (u8)((u64)block >> 40); - } - tf->nsect = nsectors & 0xff; tf->lbal = (u8) block; tf->lbam = (u8)(block >> 8); tf->lbah = (u8)(block >> 16); + tf->device = ATA_LBA; + + tf = &cmd.hob; + tf->nsect = (nsectors >> 8) & 0xff; + tf->lbal = (u8)(block >> 24); + if (sizeof(block) != 4) { + tf->lbam = (u8)((u64)block >> 32); + tf->lbah = (u8)((u64)block >> 40); + } cmd.valid.out.hob = IDE_VALID_OUT_HOB; cmd.valid.in.hob = IDE_VALID_IN_HOB; @@ -125,10 +127,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->lbal = block; tf->lbam = block >>= 8; tf->lbah = block >>= 8; - tf->device = (block >> 8) & 0xf; + tf->device = ((block >> 8) & 0xf) | ATA_LBA; } - - tf->device |= ATA_LBA; } else { unsigned int sect, head, cyl, track; @@ -235,7 +235,7 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) /* if OK, compute maximum address value */ if (!(tf->status & ATA_ERR)) - addr = ide_get_lba_addr(tf, lba48) + 1; + addr = ide_get_lba_addr(&cmd, lba48) + 1; return addr; } @@ -257,9 +257,9 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) tf->lbam = (addr_req >>= 8) & 0xff; tf->lbah = (addr_req >>= 8) & 0xff; if (lba48) { - tf->hob_lbal = (addr_req >>= 8) & 0xff; - tf->hob_lbam = (addr_req >>= 8) & 0xff; - tf->hob_lbah = (addr_req >>= 8) & 0xff; + cmd.hob.lbal = (addr_req >>= 8) & 0xff; + cmd.hob.lbam = (addr_req >>= 8) & 0xff; + cmd.hob.lbah = (addr_req >>= 8) & 0xff; tf->command = ATA_CMD_SET_MAX_EXT; } else { tf->device = (addr_req >>= 8) & 0x0f; @@ -279,7 +279,7 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) /* if OK, compute maximum address value */ if (!(tf->status & ATA_ERR)) - addr_set = ide_get_lba_addr(tf, lba48) + 1; + addr_set = ide_get_lba_addr(&cmd, lba48) + 1; return addr_set; } diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 8b0b2e9..45a424b 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -89,7 +89,7 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; + struct ide_taskfile *tf = &cmd->hob; void (*tf_outb)(u8 addr, unsigned long port); u8 valid = cmd->valid.out.hob; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; @@ -104,16 +104,17 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) HIHI = 0xFF; if (valid & IDE_VALID_FEATURE) - tf_outb(tf->hob_feature, io_ports->feature_addr); + tf_outb(tf->feature, io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - tf_outb(tf->hob_nsect, io_ports->nsect_addr); + tf_outb(tf->nsect, io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - tf_outb(tf->hob_lbal, io_ports->lbal_addr); + tf_outb(tf->lbal, io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - tf_outb(tf->hob_lbam, io_ports->lbam_addr); + tf_outb(tf->lbam, io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - tf_outb(tf->hob_lbah, io_ports->lbah_addr); + tf_outb(tf->lbah, io_ports->lbah_addr); + tf = &cmd->tf; valid = cmd->valid.out.tf; if (valid & IDE_VALID_FEATURE) @@ -170,18 +171,19 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) if (cmd->tf_flags & IDE_TFLAG_LBA48) { tf_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); + tf = &cmd->hob; valid = cmd->valid.in.hob; if (valid & IDE_VALID_ERROR) - tf->hob_error = tf_inb(io_ports->feature_addr); + tf->error = tf_inb(io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - tf->hob_nsect = tf_inb(io_ports->nsect_addr); + tf->nsect = tf_inb(io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - tf->hob_lbal = tf_inb(io_ports->lbal_addr); + tf->lbal = tf_inb(io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - tf->hob_lbam = tf_inb(io_ports->lbam_addr); + tf->lbam = tf_inb(io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - tf->hob_lbah = tf_inb(io_ports->lbah_addr); + tf->lbah = tf_inb(io_ports->lbah_addr); } } EXPORT_SYMBOL_GPL(ide_tf_read); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 99bb0a9..e71c72b 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -86,8 +86,8 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) tp_ops->input_data(drive, cmd, data, 2); - tf->data = data[0]; - tf->hob_data = data[1]; + cmd->tf.data = data[0]; + cmd->hob.data = data[1]; } tp_ops->tf_read(drive, cmd); @@ -97,7 +97,7 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) if (tf->lbal != 0xc4) { printk(KERN_ERR "%s: head unload failed!\n", drive->name); - ide_tf_dump(drive->name, tf); + ide_tf_dump(drive->name, cmd); } else drive->dev_flags |= IDE_DFLAG_PARKED; } diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index b11df4b..c1c25eb 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -206,7 +206,7 @@ static int ide_task_ioctl(ide_drive_t *drive, unsigned long arg) return -EFAULT; memset(&cmd, 0, sizeof(cmd)); - memcpy(&cmd.tf_array[7], &args[1], 6); + memcpy(&cmd.tf.feature, &args[1], 6); cmd.tf.command = args[0]; cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; @@ -214,7 +214,7 @@ static int ide_task_ioctl(ide_drive_t *drive, unsigned long arg) err = ide_no_data_taskfile(drive, &cmd); args[0] = cmd.tf.command; - memcpy(&args[1], &cmd.tf_array[7], 6); + memcpy(&args[1], &cmd.tf.feature, 6); if (copy_to_user(p, args, 7)) err = -EFAULT; diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index c9ef77c..6857e6a 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -49,16 +49,17 @@ static void ide_dump_opcode(ide_drive_t *drive) printk(KERN_CONT "0x%02x\n", cmd->tf.command); } -u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48) +u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48) { + struct ide_taskfile *tf = &cmd->tf; u32 high, low; - if (lba48) - high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | - tf->hob_lbal; - else - high = tf->device & 0xf; low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; + if (lba48) { + tf = &cmd->hob; + high = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; + } else + high = tf->device & 0xf; return ((u64)high << 24) | low; } @@ -82,7 +83,7 @@ static void ide_dump_sector(ide_drive_t *drive) if (lba48 || (tf->device & ATA_LBA)) printk(KERN_CONT ", LBAsect=%llu", - (unsigned long long)ide_get_lba_addr(tf, lba48)); + (unsigned long long)ide_get_lba_addr(&cmd, lba48)); else printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, tf->device & 0xf, tf->lbal); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index dc84f8b..3160be4 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -23,17 +23,16 @@ #include #include -void ide_tf_dump(const char *s, struct ide_taskfile *tf) +void ide_tf_dump(const char *s, struct ide_cmd *cmd) { #ifdef DEBUG printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", - s, tf->feature, tf->nsect, tf->lbal, - tf->lbam, tf->lbah, tf->device, tf->command); - printk("%s: hob: nsect 0x%02x lbal 0x%02x " - "lbam 0x%02x lbah 0x%02x\n", - s, tf->hob_nsect, tf->hob_lbal, - tf->hob_lbam, tf->hob_lbah); + s, cmd->tf.feature, cmd->tf.nsect, + cmd->tf.lbal, cmd->tf.lbam, cmd->tf.lbah, + cmd->tf.device, cmd->tf.command); + printk("%s: hob: nsect 0x%02x lbal 0x%02x lbam 0x%02x lbah 0x%02x\n", + s, cmd->hob.nsect, cmd->hob.lbal, cmd->hob.lbam, cmd->hob.lbah); #endif } @@ -80,12 +79,12 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd) memcpy(cmd, orig_cmd, sizeof(*cmd)); if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { - ide_tf_dump(drive->name, tf); + ide_tf_dump(drive->name, cmd); tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); SELECT_MASK(drive, 0); if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA) { - u8 data[2] = { tf->data, tf->hob_data }; + u8 data[2] = { cmd->tf.data, cmd->hob.data }; tp_ops->output_data(drive, cmd, data, 2); } @@ -490,10 +489,8 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) memset(&cmd, 0, sizeof(cmd)); - memcpy(&cmd.tf_array[0], req_task->hob_ports, - HDIO_DRIVE_HOB_HDR_SIZE - 2); - memcpy(&cmd.tf_array[6], req_task->io_ports, - HDIO_DRIVE_TASK_HDR_SIZE); + memcpy(&cmd.hob, req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(&cmd.tf, req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); cmd.valid.out.tf = IDE_VALID_DEVICE; cmd.valid.in.tf = IDE_VALID_DEVICE | IDE_VALID_IN_TF; @@ -598,7 +595,7 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) nsect = 0; else if (!nsect) { - nsect = (cmd.tf.hob_nsect << 8) | cmd.tf.nsect; + nsect = (cmd.hob.nsect << 8) | cmd.tf.nsect; if (!nsect) { printk(KERN_ERR "%s: in/out command without data\n", @@ -610,10 +607,8 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) err = ide_raw_taskfile(drive, &cmd, data_buf, nsect); - memcpy(req_task->hob_ports, &cmd.tf_array[0], - HDIO_DRIVE_HOB_HDR_SIZE - 2); - memcpy(req_task->io_ports, &cmd.tf_array[6], - HDIO_DRIVE_TASK_HDR_SIZE); + memcpy(req_task->hob_ports, &cmd.hob, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(req_task->io_ports, &cmd.tf, HDIO_DRIVE_TASK_HDR_SIZE); if ((cmd.ftf_flags & IDE_FTFLAG_SET_IN_FLAGS) && req_task->in_flags.all == 0) { diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index 0208dd3..3ab5bb1 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -86,18 +86,19 @@ static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) if (cmd->tf_flags & IDE_TFLAG_LBA48) { outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); + tf = &cmd->hob; valid = cmd->valid.in.hob; if (valid & IDE_VALID_ERROR) - tf->hob_error = inb(io_ports->feature_addr); + tf->error = inb(io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - tf->hob_nsect = inb(io_ports->nsect_addr); + tf->nsect = inb(io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - tf->hob_lbal = inb(io_ports->lbal_addr); + tf->lbal = inb(io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - tf->hob_lbam = inb(io_ports->lbam_addr); + tf->lbam = inb(io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - tf->hob_lbah = inb(io_ports->lbah_addr); + tf->lbah = inb(io_ports->lbah_addr); } } diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 38a715e..1238d55 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -648,7 +648,7 @@ static int __devinit init_setup_scc(struct pci_dev *dev, static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; + struct ide_taskfile *tf = &cmd->hob; u8 valid = cmd->valid.out.hob; u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; @@ -656,16 +656,17 @@ static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) HIHI = 0xFF; if (valid & IDE_VALID_FEATURE) - scc_ide_outb(tf->hob_feature, io_ports->feature_addr); + scc_ide_outb(tf->feature, io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); + scc_ide_outb(tf->nsect, io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); + scc_ide_outb(tf->lbal, io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); + scc_ide_outb(tf->lbam, io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); + scc_ide_outb(tf->lbah, io_ports->lbah_addr); + tf = &cmd->tf; valid = cmd->valid.out.tf; if (valid & IDE_VALID_FEATURE) @@ -709,18 +710,19 @@ static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) if (cmd->tf_flags & IDE_TFLAG_LBA48) { scc_ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); + tf = &cmd->hob; valid = cmd->valid.in.hob; if (valid & IDE_VALID_ERROR) - tf->hob_error = scc_ide_inb(io_ports->feature_addr); + tf->error = scc_ide_inb(io_ports->feature_addr); if (valid & IDE_VALID_NSECT) - tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr); + tf->nsect = scc_ide_inb(io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) - tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr); + tf->lbal = scc_ide_inb(io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) - tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr); + tf->lbam = scc_ide_inb(io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) - tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr); + tf->lbah = scc_ide_inb(io_ports->lbah_addr); } } diff --git a/include/linux/ide.h b/include/linux/ide.h index 58951f5..e2ea38d 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -282,44 +282,25 @@ enum { }; struct ide_taskfile { - u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */ - /* 1-5: additional data to support LBA48 */ - union { - u8 hob_error; /* read: error */ - u8 hob_feature; /* write: feature */ - }; - - u8 hob_nsect; - u8 hob_lbal; - u8 hob_lbam; - u8 hob_lbah; - - u8 data; /* 6: low data byte (for TASKFILE IOCTL) */ - - union { /*  7: */ - u8 error; /* read: error */ - u8 feature; /* write: feature */ + u8 data; /* 0: data byte (for TASKFILE ioctl) */ + union { /* 1: */ + u8 error; /* read: error */ + u8 feature; /* write: feature */ }; - - u8 nsect; /* 8: number of sectors */ - u8 lbal; /* 9: LBA low */ - u8 lbam; /* 10: LBA mid */ - u8 lbah; /* 11: LBA high */ - - u8 device; /* 12: device select */ - - union { /* 13: */ - u8 status; /*  read: status  */ + u8 nsect; /* 2: number of sectors */ + u8 lbal; /* 3: LBA low */ + u8 lbam; /* 4: LBA mid */ + u8 lbah; /* 5: LBA high */ + u8 device; /* 6: device select */ + union { /* 7: */ + u8 status; /* read: status */ u8 command; /* write: command */ }; }; struct ide_cmd { - union { - struct ide_taskfile tf; - u8 tf_array[14]; - }; - + struct ide_taskfile tf; + struct ide_taskfile hob; struct { struct { u8 tf; @@ -1143,7 +1124,7 @@ extern int ide_devset_execute(ide_drive_t *drive, void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); int ide_complete_rq(ide_drive_t *, int, unsigned int); -void ide_tf_dump(const char *, struct ide_taskfile *); +void ide_tf_dump(const char *, struct ide_cmd *); void ide_exec_command(ide_hwif_t *, u8); u8 ide_read_status(ide_hwif_t *); @@ -1510,7 +1491,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) extern void ide_toggle_bounce(ide_drive_t *drive, int on); -u64 ide_get_lba_addr(struct ide_taskfile *, int); +u64 ide_get_lba_addr(struct ide_cmd *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); struct ide_timing { -- cgit v0.10.2 From 4109d19af73826aa6fee1a1b951670381be88f8b Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:02 +0200 Subject: ide: move common code out of tf_load() method Move device register masking (and setting drive->select) out of tf_load() method and into the only function that needs to use this code, do_rw_taskfile()... Signed-off-by: Sergei Shtylyov [bart: fix whitespace error] Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 45a424b..7950b3b 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -93,16 +93,12 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) void (*tf_outb)(u8 addr, unsigned long port); u8 valid = cmd->valid.out.hob; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; if (mmio) tf_outb = ide_mm_outb; else tf_outb = ide_outb; - if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) - HIHI = 0xFF; - if (valid & IDE_VALID_FEATURE) tf_outb(tf->feature, io_ports->feature_addr); if (valid & IDE_VALID_NSECT) @@ -127,10 +123,8 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) tf_outb(tf->lbam, io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) tf_outb(tf->lbah, io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - tf_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); + tf_outb(tf->device, io_ports->device_addr); } EXPORT_SYMBOL_GPL(ide_tf_load); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 3160be4..0318a4c 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -88,6 +88,16 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd) tp_ops->output_data(drive, cmd, data, 2); } + + if (cmd->valid.out.tf & IDE_VALID_DEVICE) { + u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? + 0xE0 : 0xEF; + + if (!(cmd->ftf_flags & IDE_FTFLAG_FLAGGED)) + cmd->tf.device &= HIHI; + cmd->tf.device |= drive->select; + } + tp_ops->tf_load(drive, cmd); } diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 1238d55..f5a6fa0 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -650,10 +650,6 @@ static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) struct ide_io_ports *io_ports = &drive->hwif->io_ports; struct ide_taskfile *tf = &cmd->hob; u8 valid = cmd->valid.out.hob; - u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED) - HIHI = 0xFF; if (valid & IDE_VALID_FEATURE) scc_ide_outb(tf->feature, io_ports->feature_addr); @@ -679,10 +675,8 @@ static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) scc_ide_outb(tf->lbam, io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) scc_ide_outb(tf->lbah, io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - scc_ide_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); + scc_ide_outb(tf->device, io_ports->device_addr); } static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) -- cgit v0.10.2 From 30881b9ac91e7c23e0ceb8414ab7de1961809bdd Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:02 +0200 Subject: ide: call write_devctl() method from tf_read() method Use write_devctl() method to clear/set the HOB bit in tf_read() method. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 7950b3b..66c2776 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -133,21 +133,17 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; struct ide_taskfile *tf = &cmd->tf; - void (*tf_outb)(u8 addr, unsigned long port); u8 (*tf_inb)(unsigned long port); u8 valid = cmd->valid.in.tf; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - if (mmio) { - tf_outb = ide_mm_outb; + if (mmio) tf_inb = ide_mm_inb; - } else { - tf_outb = ide_outb; + else tf_inb = ide_inb; - } /* be sure we're looking at the low order bits */ - tf_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); + hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); if (valid & IDE_VALID_ERROR) tf->error = tf_inb(io_ports->feature_addr); @@ -163,7 +159,7 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) tf->device = tf_inb(io_ports->device_addr); if (cmd->tf_flags & IDE_TFLAG_LBA48) { - tf_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); + hwif->tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); tf = &cmd->hob; valid = cmd->valid.in.hob; diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index 3ab5bb1..f1305f4 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -68,7 +68,7 @@ static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) u8 valid = cmd->valid.in.tf; /* be sure we're looking at the low order bits */ - outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); + ide_write_devctl(hwif, ATA_DEVCTL_OBS); if (valid & IDE_VALID_ERROR) tf->error = inb(io_ports->feature_addr); @@ -84,7 +84,7 @@ static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) tf->device = superio_ide_inb(io_ports->device_addr); if (cmd->tf_flags & IDE_TFLAG_LBA48) { - outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); + ide_write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); tf = &cmd->hob; valid = cmd->valid.in.hob; diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index f5a6fa0..feabf54 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -686,7 +686,7 @@ static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) u8 valid = cmd->valid.in.tf; /* be sure we're looking at the low order bits */ - scc_ide_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr); + scc_write_devctl(hwif, ATA_DEVCTL_OBS); if (valid & IDE_VALID_ERROR) tf->error = scc_ide_inb(io_ports->feature_addr); @@ -702,7 +702,7 @@ static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) tf->device = scc_ide_inb(io_ports->device_addr); if (cmd->tf_flags & IDE_TFLAG_LBA48) { - scc_ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr); + scc_write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); tf = &cmd->hob; valid = cmd->valid.in.hob; -- cgit v0.10.2 From c9ff9e7b64138d87023b733e618f29a1d58543f7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:03 +0200 Subject: ide: refactor tf_load() method Simplify tf_load() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and moving the code that deals with the high order bytes into the only function interested, do_rw_taskfile(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 66c2776..481e221 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -85,13 +85,11 @@ void ide_dev_select(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_dev_select); -void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) +void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->hob; void (*tf_outb)(u8 addr, unsigned long port); - u8 valid = cmd->valid.out.hob; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (mmio) @@ -109,20 +107,6 @@ void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) tf_outb(tf->lbam, io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) tf_outb(tf->lbah, io_ports->lbah_addr); - - tf = &cmd->tf; - valid = cmd->valid.out.tf; - - if (valid & IDE_VALID_FEATURE) - tf_outb(tf->feature, io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf_outb(tf->nsect, io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf_outb(tf->lbal, io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf_outb(tf->lbam, io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf_outb(tf->lbah, io_ports->lbah_addr); if (valid & IDE_VALID_DEVICE) tf_outb(tf->device, io_ports->device_addr); } diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 0fdf0df..6f1ed42 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -312,10 +312,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; + struct ide_taskfile tf; u16 *id = drive->id, i; int error = 0; u8 stat; - struct ide_cmd cmd; #ifdef CONFIG_BLK_DEV_IDEDMA if (hwif->dma_ops) /* check if host supports DMA */ @@ -347,12 +347,11 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) udelay(1); tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS); - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; - cmd.tf.feature = SETFEATURES_XFER; - cmd.tf.nsect = speed; + memset(&tf, 0, sizeof(tf)); + tf.feature = SETFEATURES_XFER; + tf.nsect = speed; - tp_ops->tf_load(drive, &cmd); + tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE | IDE_VALID_NSECT); tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 6a98d7c..44d7816 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -283,13 +283,11 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) * identify command to be sure of reply */ if (cmd == ATA_CMD_ID_ATAPI) { - struct ide_cmd cmd; + struct ide_taskfile tf; - memset(&cmd, 0, sizeof(cmd)); + memset(&tf, 0, sizeof(tf)); /* disable DMA & overlap */ - cmd.valid.out.tf = IDE_VALID_FEATURE; - - tp_ops->tf_load(drive, &cmd); + tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE); } /* ask drive for ID */ diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0318a4c..b1806ed 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -98,7 +98,8 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd) cmd->tf.device |= drive->select; } - tp_ops->tf_load(drive, cmd); + tp_ops->tf_load(drive, &cmd->hob, cmd->valid.out.hob); + tp_ops->tf_load(drive, &cmd->tf, cmd->valid.out.tf); } switch (cmd->protocol) { diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index feabf54..5ecb70c 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -645,25 +645,9 @@ static int __devinit init_setup_scc(struct pci_dev *dev, return rc; } -static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) +static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &cmd->hob; - u8 valid = cmd->valid.out.hob; - - if (valid & IDE_VALID_FEATURE) - scc_ide_outb(tf->feature, io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - scc_ide_outb(tf->lbah, io_ports->lbah_addr); - - tf = &cmd->tf; - valid = cmd->valid.out.tf; if (valid & IDE_VALID_FEATURE) scc_ide_outb(tf->feature, io_ports->feature_addr); diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index af8b0f6..564422d 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -434,11 +434,12 @@ static void tx4939ide_tf_load_fixup(ide_drive_t *drive) tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl); } -static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd) +static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, + u8 valid) { - ide_tf_load(drive, cmd); + ide_tf_load(drive, tf, valid); - if (cmd->valid.out.tf & IDE_VALID_DEVICE) + if (valid & IDE_VALID_DEVICE) tx4939ide_tf_load_fixup(drive); } diff --git a/include/linux/ide.h b/include/linux/ide.h index e2ea38d..0ba1c6a 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -624,7 +624,7 @@ struct ide_tp_ops { void (*write_devctl)(struct hwif_s *, u8); void (*dev_select)(ide_drive_t *); - void (*tf_load)(ide_drive_t *, struct ide_cmd *); + void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); void (*tf_read)(ide_drive_t *, struct ide_cmd *); void (*input_data)(ide_drive_t *, struct ide_cmd *, @@ -1132,7 +1132,7 @@ u8 ide_read_altstatus(ide_hwif_t *); void ide_write_devctl(ide_hwif_t *, u8); void ide_dev_select(ide_drive_t *); -void ide_tf_load(ide_drive_t *, struct ide_cmd *); +void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); void ide_tf_read(ide_drive_t *, struct ide_cmd *); void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); -- cgit v0.10.2 From 3153c26b54230d025c6d536e8d3015def4524906 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:03 +0200 Subject: ide: refactor tf_read() method Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and factoring out the code that deals with the high order bytes into ide_tf_readback() to be called from the only two functions interested, ide_complete_cmd() and ide_dump_sector(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index a359323..7201b17 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -254,15 +254,13 @@ EXPORT_SYMBOL_GPL(ide_cd_get_xferlen); void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) { - struct ide_cmd cmd; + struct ide_taskfile tf; - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.in.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | IDE_VALID_NSECT; + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT | + IDE_VALID_LBAM | IDE_VALID_LBAH); - drive->hwif->tp_ops->tf_read(drive, &cmd); - - *bcount = (cmd.tf.lbah << 8) | cmd.tf.lbam; - *ireason = cmd.tf.nsect & 3; + *bcount = (tf.lbah << 8) | tf.lbam; + *ireason = tf.nsect & 3; } EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason); @@ -452,14 +450,11 @@ static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf, static u8 ide_read_ireason(ide_drive_t *drive) { - struct ide_cmd cmd; - - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.in.tf = IDE_VALID_NSECT; + struct ide_taskfile tf; - drive->hwif->tp_ops->tf_read(drive, &cmd); + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT); - return cmd.tf.nsect & 3; + return tf.nsect & 3; } static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c index 481e221..46721c4 100644 --- a/drivers/ide/ide-io-std.c +++ b/drivers/ide/ide-io-std.c @@ -112,13 +112,11 @@ void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) } EXPORT_SYMBOL_GPL(ide_tf_load); -void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) +void ide_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; u8 (*tf_inb)(unsigned long port); - u8 valid = cmd->valid.in.tf; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (mmio) @@ -126,9 +124,6 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) else tf_inb = ide_inb; - /* be sure we're looking at the low order bits */ - hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); - if (valid & IDE_VALID_ERROR) tf->error = tf_inb(io_ports->feature_addr); if (valid & IDE_VALID_NSECT) @@ -141,24 +136,6 @@ void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) tf->lbah = tf_inb(io_ports->lbah_addr); if (valid & IDE_VALID_DEVICE) tf->device = tf_inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - hwif->tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); - - tf = &cmd->hob; - valid = cmd->valid.in.hob; - - if (valid & IDE_VALID_ERROR) - tf->error = tf_inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = tf_inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = tf_inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = tf_inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = tf_inb(io_ports->lbah_addr); - } } EXPORT_SYMBOL_GPL(ide_tf_read); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index e71c72b..2ae02b8 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -90,7 +90,7 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) cmd->hob.data = data[1]; } - tp_ops->tf_read(drive, cmd); + ide_tf_readback(drive, cmd); if ((cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) && tf_cmd == ATA_CMD_IDLEIMMEDIATE) { diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 6f1ed42..c19a221 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -37,14 +37,11 @@ void SELECT_MASK(ide_drive_t *drive, int mask) u8 ide_read_error(ide_drive_t *drive) { - struct ide_cmd cmd; - - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.in.tf = IDE_VALID_ERROR; + struct ide_taskfile tf; - drive->hwif->tp_ops->tf_read(drive, &cmd); + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_ERROR); - return cmd.tf.error; + return tf.error; } EXPORT_SYMBOL_GPL(ide_read_error); diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 6857e6a..56ff8c4 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -79,7 +79,7 @@ static void ide_dump_sector(ide_drive_t *drive) } else cmd.valid.in.tf = IDE_VALID_LBA | IDE_VALID_DEVICE; - drive->hwif->tp_ops->tf_read(drive, &cmd); + ide_tf_readback(drive, &cmd); if (lba48 || (tf->device & ATA_LBA)) printk(KERN_CONT ", LBAsect=%llu", diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 44d7816..7f264ed 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -335,14 +335,11 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) static u8 ide_read_device(ide_drive_t *drive) { - struct ide_cmd cmd; + struct ide_taskfile tf; - memset(&cmd, 0, sizeof(cmd)); - cmd.valid.in.tf = IDE_VALID_DEVICE; + drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_DEVICE); - drive->hwif->tp_ops->tf_read(drive, &cmd); - - return cmd.tf.device; + return tf.device; } /** diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index b1806ed..4aa6223 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -23,6 +23,23 @@ #include #include +void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + + /* Be sure we're looking at the low order bytes */ + tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); + + tp_ops->tf_read(drive, &cmd->tf, cmd->valid.in.tf); + + if (cmd->tf_flags & IDE_TFLAG_LBA48) { + tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); + + tp_ops->tf_read(drive, &cmd->hob, cmd->valid.in.hob); + } +} + void ide_tf_dump(const char *s, struct ide_cmd *cmd) { #ifdef DEBUG diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index f1305f4..95327a2 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -61,14 +61,10 @@ static u8 superio_dma_sff_read_status(ide_hwif_t *hwif) return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS); } -static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) +static void superio_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, + u8 valid) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - u8 valid = cmd->valid.in.tf; - - /* be sure we're looking at the low order bits */ - ide_write_devctl(hwif, ATA_DEVCTL_OBS); if (valid & IDE_VALID_ERROR) tf->error = inb(io_ports->feature_addr); @@ -82,24 +78,6 @@ static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) tf->lbah = inb(io_ports->lbah_addr); if (valid & IDE_VALID_DEVICE) tf->device = superio_ide_inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - ide_write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); - - tf = &cmd->hob; - valid = cmd->valid.in.hob; - - if (valid & IDE_VALID_ERROR) - tf->error = inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = inb(io_ports->lbah_addr); - } } static void ns87415_dev_select(ide_drive_t *drive); diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 5ecb70c..5be41f2 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -663,14 +663,9 @@ static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) scc_ide_outb(tf->device, io_ports->device_addr); } -static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) +static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { struct ide_io_ports *io_ports = &drive->hwif->io_ports; - struct ide_taskfile *tf = &cmd->tf; - u8 valid = cmd->valid.in.tf; - - /* be sure we're looking at the low order bits */ - scc_write_devctl(hwif, ATA_DEVCTL_OBS); if (valid & IDE_VALID_ERROR) tf->error = scc_ide_inb(io_ports->feature_addr); @@ -684,24 +679,6 @@ static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd) tf->lbah = scc_ide_inb(io_ports->lbah_addr); if (valid & IDE_VALID_DEVICE) tf->device = scc_ide_inb(io_ports->device_addr); - - if (cmd->tf_flags & IDE_TFLAG_LBA48) { - scc_write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS); - - tf = &cmd->hob; - valid = cmd->valid.in.hob; - - if (valid & IDE_VALID_ERROR) - tf->error = scc_ide_inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = scc_ide_inb(io_ports->lbah_addr); - } } static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd, diff --git a/include/linux/ide.h b/include/linux/ide.h index 0ba1c6a..ff65fff 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -625,7 +625,7 @@ struct ide_tp_ops { void (*dev_select)(ide_drive_t *); void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); - void (*tf_read)(ide_drive_t *, struct ide_cmd *); + void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8); void (*input_data)(ide_drive_t *, struct ide_cmd *, void *, unsigned int); @@ -1124,6 +1124,7 @@ extern int ide_devset_execute(ide_drive_t *drive, void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); int ide_complete_rq(ide_drive_t *, int, unsigned int); +void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd); void ide_tf_dump(const char *, struct ide_cmd *); void ide_exec_command(ide_hwif_t *, u8); @@ -1133,7 +1134,7 @@ void ide_write_devctl(ide_hwif_t *, u8); void ide_dev_select(ide_drive_t *); void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); -void ide_tf_read(ide_drive_t *, struct ide_cmd *); +void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8); void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); -- cgit v0.10.2 From 3c8a48e9a94be1e063f2f8d7d5f6f691423a3e71 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 8 Apr 2009 14:13:03 +0200 Subject: ide-cd: reverse NOT_READY sense key logic Make the case of flushing the drive's cache explicit. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3ce1eaf..3aec19d 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -341,15 +341,15 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) switch (sense_key) { case NOT_READY: - if (blk_fs_request(rq) == 0 || rq_data_dir(rq) == READ) { + if (blk_fs_request(rq) && rq_data_dir(rq) == WRITE) { + if (ide_cd_breathe(drive, rq)) + return 1; + } else { cdrom_saw_media_change(drive); if (blk_fs_request(rq) && !quiet) printk(KERN_ERR PFX "%s: tray open\n", drive->name); - } else { - if (ide_cd_breathe(drive, rq)) - return 1; } do_end_request = 1; break; -- cgit v0.10.2 From 55c590b64e70cb9922ff56703578ec271eaaca02 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 8 Apr 2009 14:13:04 +0200 Subject: at91_ide: remove unused ide_mm_{outb,inb} Cc: Sergei Shtylyov Signed-off-by: Stanislaw Gruszka diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index 4f3725d..c48dc61 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c @@ -174,16 +174,6 @@ static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, leave_16bit(chipselect, mode); } -static u8 ide_mm_inb(unsigned long port) -{ - return readb((void __iomem *) port); -} - -static void ide_mm_outb(u8 value, unsigned long port) -{ - writeb(value, (void __iomem *) port); -} - static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) { struct ide_timing *timing; -- cgit v0.10.2 From fb4252e59452c18b88af014a2c4ee697bbf8cbc6 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 8 Apr 2009 14:13:04 +0200 Subject: at91_ide: turn on PIO 6 support As we have already PIO 6 transfer mode supported in IDE layer, we can turn it on in the driver. Signed-off-by: Stanislaw Gruszka Tested-by: "Steve Wootton" Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index c48dc61..403d0e4 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c @@ -215,7 +215,7 @@ static const struct ide_port_info at91_ide_port_info __initdata = { .tp_ops = &at91_ide_tp_ops, .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE | IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS, - .pio_mask = ATA_PIO5, + .pio_mask = ATA_PIO6, }; /* -- cgit v0.10.2 From f0edef8c8b35f04b89311590dd6f1249f07fab3a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 8 Apr 2009 14:13:04 +0200 Subject: xsysace: Fix dereferencing of cf_id after hd_driveid removal Commit 4aaf2fec718f6fbf38668edf733a0ab09a49cab1 (xsysace: make it 'struct hd_driveid'-free) converted the cf_id member of 'struct ace_device' from a 'struct hd_driveid' to a u16 array. However, references to the base of the structure were still using the '&' operator. When the address was used with the ata_id_u32() macro, the compiler used the size of the entire array instead of sizeof(u16) to calculate the offset from the base address. This patch removes the use of the '&' operator from all references of cf_id to fix the bug and remove future confusion. Signed-off-by: Grant Likely Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index 6cccdc3..4aecf5d 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -563,7 +563,7 @@ static void ace_fsm_dostate(struct ace_device *ace) case ACE_FSM_STATE_IDENTIFY_PREPARE: /* Send identify command */ ace->fsm_task = ACE_TASK_IDENTIFY; - ace->data_ptr = &ace->cf_id; + ace->data_ptr = ace->cf_id; ace->data_count = ACE_BUF_PER_SECTOR; ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY); @@ -608,8 +608,8 @@ static void ace_fsm_dostate(struct ace_device *ace) break; case ACE_FSM_STATE_IDENTIFY_COMPLETE: - ace_fix_driveid(&ace->cf_id[0]); - ace_dump_mem(&ace->cf_id, 512); /* Debug: Dump out disk ID */ + ace_fix_driveid(ace->cf_id); + ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */ if (ace->data_result) { /* Error occured, disable the disk */ @@ -622,9 +622,9 @@ static void ace_fsm_dostate(struct ace_device *ace) /* Record disk parameters */ set_capacity(ace->gd, - ata_id_u32(&ace->cf_id, ATA_ID_LBA_CAPACITY)); + ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY)); dev_info(ace->dev, "capacity: %i sectors\n", - ata_id_u32(&ace->cf_id, ATA_ID_LBA_CAPACITY)); + ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY)); } /* We're done, drop to IDLE state and notify waiters */ @@ -923,7 +923,7 @@ static int ace_release(struct gendisk *disk, fmode_t mode) static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo) { struct ace_device *ace = bdev->bd_disk->private_data; - u16 *cf_id = &ace->cf_id[0]; + u16 *cf_id = ace->cf_id; dev_dbg(ace->dev, "ace_getgeo()\n"); -- cgit v0.10.2 From 06aa05b307e8efbc278f201198e7cdf3877bc5c2 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Fri, 3 Apr 2009 17:24:23 -0500 Subject: x86: prevent /sys/firmware/sgi_uv from being created on non-uv systems /sys/firmware/sgi_uv should only be created on uv systems. Signed-off-by: Russ Anderson LKML-Reference: <20090403222423.GA28546@sgi.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/uv_sysfs.c b/arch/x86/kernel/uv_sysfs.c index 67f9b9d..36afb98 100644 --- a/arch/x86/kernel/uv_sysfs.c +++ b/arch/x86/kernel/uv_sysfs.c @@ -21,6 +21,7 @@ #include #include +#include struct kobject *sgi_uv_kobj; @@ -47,6 +48,9 @@ static int __init sgi_uv_sysfs_init(void) { unsigned long ret; + if (!is_uv_system()) + return -ENODEV; + if (!sgi_uv_kobj) sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj); if (!sgi_uv_kobj) { -- cgit v0.10.2 From 54c28d294c658abb6d6430a49fda230fdfd601c8 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Fri, 3 Apr 2009 15:39:42 -0500 Subject: x86, uv: add Kconfig dependency on NUMA for UV systems Impact: build fix Add Kconfig dependency on NUMA for enabling UV. Although it might be possible to configure non-NUMA UV systems, they are unsupported and not interesting. Much of the infrastructure for UV requires NUMA support. Signed-off-by: Jack Steiner LKML-Reference: <20090403203942.GA20137@sgi.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 748e50a..2817ab5 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -354,6 +354,7 @@ config X86_UV bool "SGI Ultraviolet" depends on X86_64 depends on X86_EXTENDED_PLATFORM + depends on NUMA select X86_X2APIC ---help--- This option is needed in order to support SGI Ultraviolet systems. -- cgit v0.10.2 From ac15e95090c2588ada4904c8c4ae8edd347acdf0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 7 Apr 2009 17:51:49 -0700 Subject: leds: just ignore invalid GPIOs in leds-gpio Fix build problems with leds-gpio: CC drivers/leds/leds-gpio.o drivers/leds/leds-gpio.c: In function 'create_gpio_led': drivers/leds/leds-gpio.c:85: warning: 'return' with no value, in function returning non-void Signed-off-by: David Brownell Signed-off-by: Richard Purdie diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 102ef4a..d210905 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -82,7 +82,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template, if (!gpio_is_valid(template->gpio)) { printk(KERN_INFO "Skipping unavilable LED gpio %d (%s)\n", template->gpio, template->name); - return; + return 0; } ret = gpio_request(template->gpio, template->name); -- cgit v0.10.2 From 022624a758dc9489388a99ad29577b4c8c09237c Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Fri, 27 Mar 2009 17:09:10 +0800 Subject: printk: fix wrong format string iter for printk printk("%Q"); Output before patch: %QQ Output after patch: %Q Signed-off-by: Zhao Lei Acked-by: Lai Jiangshan Acked-by: Frederic Weisbecker Cc: torvalds@linux-foundation.org Cc: Steven Rostedt LKML-Reference: <49CC97B6.7040809@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/lib/vsprintf.c b/lib/vsprintf.c index be3001f..7536ace 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -1051,13 +1051,6 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args) if (str < end) *str = '%'; ++str; - if (*fmt) { - if (str < end) - *str = *fmt; - ++str; - } else { - --fmt; - } break; case FORMAT_TYPE_NRCHARS: { @@ -1339,8 +1332,6 @@ do { \ break; case FORMAT_TYPE_INVALID: - if (!*fmt) - --fmt; break; case FORMAT_TYPE_NRCHARS: { @@ -1523,13 +1514,6 @@ int bstr_printf(char *buf, size_t size, const char *fmt, const u32 *bin_buf) if (str < end) *str = '%'; ++str; - if (*fmt) { - if (str < end) - *str = *fmt; - ++str; - } else { - --fmt; - } break; case FORMAT_TYPE_NRCHARS: -- cgit v0.10.2 From 01fad98a1f1d3b38adcbab4bd97f7f4cb983ffb5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 8 Apr 2009 17:27:59 +0200 Subject: sched: refresh MAINTAINERS entry Peter has become a co-maintainer of the scheduler during the last year, and Robert has become inactive - update the MAINTAINERS entry. Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/MAINTAINERS b/MAINTAINERS index c3b2159..718b50a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3873,8 +3873,8 @@ S: Maintained SCHEDULER P: Ingo Molnar M: mingo@elte.hu -P: Robert Love [the preemptible kernel bits] -M: rml@tech9.net +P: Peter Zijlstra +M: peterz@infradead.org L: linux-kernel@vger.kernel.org S: Maintained -- cgit v0.10.2 From 08d63b10db943d4e1ff5ae3abc33467f037477f3 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 8 Apr 2009 08:00:01 -0700 Subject: x86: make 64 bit to use default_inquire_remote_apic Impact: restore old behavior for flat and phys_flat Signed-off-by: Yinhai Lu Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 0014714..306e5e8 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -212,7 +212,7 @@ struct apic apic_flat = { .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, .wait_for_init_deassert = NULL, .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = NULL, + .inquire_remote_apic = default_inquire_remote_apic, .read = native_apic_mem_read, .write = native_apic_mem_write, @@ -362,7 +362,7 @@ struct apic apic_physflat = { .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, .wait_for_init_deassert = NULL, .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = NULL, + .inquire_remote_apic = default_inquire_remote_apic, .read = native_apic_mem_read, .write = native_apic_mem_write, -- cgit v0.10.2 From 6279a751fe096a21dc7704e918d570d3ff06e769 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 27 Mar 2009 01:06:07 +0100 Subject: posix-timers: fix RLIMIT_CPU && fork() See http://bugzilla.kernel.org/show_bug.cgi?id=12911 copy_signal() copies signal->rlim, but RLIMIT_CPU is "lost". Because posix_cpu_timers_init_group() sets cputime_expires.prof_exp = 0 and thus fastpath_timer_check() returns false unless we have other expired cpu timers. Change copy_signal() to set cputime_expires.prof_exp if we have RLIMIT_CPU. Also, set cputimer.running = 1 in that case. This is not strictly necessary, but imho makes sense. Reported-by: Peter Lojkin Signed-off-by: Oleg Nesterov Acked-by: Peter Zijlstra Cc: Peter Lojkin Cc: Roland McGrath Cc: stable@kernel.org LKML-Reference: <20090327000607.GA10104@redhat.com> Signed-off-by: Ingo Molnar diff --git a/kernel/fork.c b/kernel/fork.c index 4854c2c..9b51a1b 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -808,6 +808,12 @@ static void posix_cpu_timers_init_group(struct signal_struct *sig) sig->cputime_expires.virt_exp = cputime_zero; sig->cputime_expires.sched_exp = 0; + if (sig->rlim[RLIMIT_CPU].rlim_cur != RLIM_INFINITY) { + sig->cputime_expires.prof_exp = + secs_to_cputime(sig->rlim[RLIMIT_CPU].rlim_cur); + sig->cputimer.running = 1; + } + /* The timer lists. */ INIT_LIST_HEAD(&sig->cpu_timers[0]); INIT_LIST_HEAD(&sig->cpu_timers[1]); @@ -823,11 +829,8 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) atomic_inc(¤t->signal->live); return 0; } - sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL); - - if (sig) - posix_cpu_timers_init_group(sig); + sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL); tsk->signal = sig; if (!sig) return -ENOMEM; @@ -865,6 +868,8 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim); task_unlock(current->group_leader); + posix_cpu_timers_init_group(sig); + acct_init_pacct(&sig->pacct); tty_audit_fork(sig); -- cgit v0.10.2 From 8f2e586567b1bad72dac7c3810fe9a2ef7117506 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 27 Mar 2009 01:06:10 +0100 Subject: posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF) update_rlimit_cpu() tries to optimize out set_process_cpu_timer() in case when we already have CPUCLOCK_PROF timer which should expire first. But it uses cputime_lt() instead of cputime_gt(). Test case: int main(void) { struct itimerval it = { .it_value = { .tv_sec = 1000 }, }; assert(!setitimer(ITIMER_PROF, &it, NULL)); struct rlimit rl = { .rlim_cur = 1, .rlim_max = 1, }; assert(!setrlimit(RLIMIT_CPU, &rl)); for (;;) ; return 0; } Without this patch, the task is not killed as RLIMIT_CPU demands. Signed-off-by: Oleg Nesterov Acked-by: Peter Zijlstra Cc: Peter Lojkin Cc: Roland McGrath Cc: stable@kernel.org LKML-Reference: <20090327000610.GA10108@redhat.com> Signed-off-by: Ingo Molnar diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 8e5d9a6..bb53185 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -18,7 +18,7 @@ void update_rlimit_cpu(unsigned long rlim_new) cputime = secs_to_cputime(rlim_new); if (cputime_eq(current->signal->it_prof_expires, cputime_zero) || - cputime_lt(current->signal->it_prof_expires, cputime)) { + cputime_gt(current->signal->it_prof_expires, cputime)) { spin_lock_irq(¤t->sighand->siglock); set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL); spin_unlock_irq(¤t->sighand->siglock); -- cgit v0.10.2 From c5da9a2bb24a7928c39495cdabf98d3f7931bde5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 26 Mar 2009 20:45:28 +0000 Subject: x86: DMI match for the Dell DXP061 as it needs BIOS reboot Closes http://bugzilla.kernel.org/show_bug.cgi?12901 Signed-off-by: Alan Cox LKML-Reference: <20090326204524.4454.8776.stgit@localhost.localdomain> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 2aef36d..1340dad 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -224,6 +224,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), }, }, + { /* Handle problems with rebooting on Dell DXP061 */ + .callback = set_bios_reboot, + .ident = "Dell DXP061", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"), + }, + }, { } }; -- cgit v0.10.2 From 59d138120d18930ba9a5466662d45a2bd2223455 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 25 Mar 2009 10:50:34 +0900 Subject: x86: smarten /proc/interrupts output for new counters Now /proc/interrupts of tip tree has new counters: PLT: Platform interrupts Format change of output, as like that by commit: commit 7a81d9a7da03d2f27840d659f97ef140d032f609 x86: smarten /proc/interrupts output should be applied to these new counters too. Signed-off-by: Hidetoshi Seto Cc: Jan Beulich LKML-Reference: <49C98DEA.8060208@jp.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 3aaf7b9..c3fe010 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -65,7 +65,7 @@ static int show_other_interrupts(struct seq_file *p, int prec) seq_printf(p, " Spurious interrupts\n"); #endif if (generic_interrupt_extension) { - seq_printf(p, "PLT: "); + seq_printf(p, "%*s: ", prec, "PLT"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->generic_irqs); seq_printf(p, " Platform interrupts\n"); -- cgit v0.10.2 From 6e34eeddf7deec1444bbddab533f03f520d8458c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 7 Apr 2009 18:12:43 -0400 Subject: block_write_full_page: switch synchronous writes to use WRITE_SYNC_PLUG Now that we have a distinction between WRITE_SYNC and WRITE_SYNC_PLUG, use WRITE_SYNC_PLUG in __block_write_full_page() to avoid unplugging the block device I/O queue between each page that gets flushed out. Otherwise, when we run sync() or fsync() and we need to write out a large number of pages, the block device queue will get unplugged between for every page that is flushed out, which will be a pretty serious performance regression caused by commit a64c8610. Signed-off-by: "Theodore Ts'o" diff --git a/fs/buffer.c b/fs/buffer.c index 6e35762..13edf7a 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1596,6 +1596,16 @@ EXPORT_SYMBOL(unmap_underlying_metadata); * locked buffer. This only can happen if someone has written the buffer * directly, with submit_bh(). At the address_space level PageWriteback * prevents this contention from occurring. + * + * If block_write_full_page() is called with wbc->sync_mode == + * WB_SYNC_ALL, the writes are posted using WRITE_SYNC_PLUG; this + * causes the writes to be flagged as synchronous writes, but the + * block device queue will NOT be unplugged, since usually many pages + * will be pushed to the out before the higher-level caller actually + * waits for the writes to be completed. The various wait functions, + * such as wait_on_writeback_range() will ultimately call sync_page() + * which will ultimately call blk_run_backing_dev(), which will end up + * unplugging the device queue. */ static int __block_write_full_page(struct inode *inode, struct page *page, get_block_t *get_block, struct writeback_control *wbc) @@ -1606,7 +1616,8 @@ static int __block_write_full_page(struct inode *inode, struct page *page, struct buffer_head *bh, *head; const unsigned blocksize = 1 << inode->i_blkbits; int nr_underway = 0; - int write_op = (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); + int write_op = (wbc->sync_mode == WB_SYNC_ALL ? + WRITE_SYNC_PLUG : WRITE); BUG_ON(!PageLocked(page)); -- cgit v0.10.2 From 430db323fae7665da721768949ade6304811c648 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 7 Apr 2009 18:25:01 -0400 Subject: ext3: Try to avoid starting a transaction in writepage for data=writepage This does the same as commit 9e80d407736161d9b8b0c5a0d44f786e44c322ea (avoid starting a transaction when no block allocation is needed) but for data=writeback mode of ext3. We also cleanup the data=ordered case a bit to stick to coding style... Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 466a332..fcfa243 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1521,12 +1521,16 @@ static int ext3_ordered_writepage(struct page *page, if (!page_has_buffers(page)) { create_empty_buffers(page, inode->i_sb->s_blocksize, (1 << BH_Dirty)|(1 << BH_Uptodate)); - } else if (!walk_page_buffers(NULL, page_buffers(page), 0, PAGE_CACHE_SIZE, NULL, buffer_unmapped)) { - /* Provide NULL instead of get_block so that we catch bugs if buffers weren't really mapped */ - return block_write_full_page(page, NULL, wbc); + page_bufs = page_buffers(page); + } else { + page_bufs = page_buffers(page); + if (!walk_page_buffers(NULL, page_bufs, 0, PAGE_CACHE_SIZE, + NULL, buffer_unmapped)) { + /* Provide NULL get_block() to catch bugs if buffers + * weren't really mapped */ + return block_write_full_page(page, NULL, wbc); + } } - page_bufs = page_buffers(page); - handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode)); if (IS_ERR(handle)) { @@ -1581,6 +1585,15 @@ static int ext3_writeback_writepage(struct page *page, if (ext3_journal_current_handle()) goto out_fail; + if (page_has_buffers(page)) { + if (!walk_page_buffers(NULL, page_buffers(page), 0, + PAGE_CACHE_SIZE, NULL, buffer_unmapped)) { + /* Provide NULL get_block() to catch bugs if buffers + * weren't really mapped */ + return block_write_full_page(page, NULL, wbc); + } + } + handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode)); if (IS_ERR(handle)) { ret = PTR_ERR(handle); -- cgit v0.10.2 From 6911a9b8ae8b2a1dab4dfda9c2bd20f7ca2961d6 Mon Sep 17 00:00:00 2001 From: Ben Gamari Date: Thu, 2 Apr 2009 11:24:54 -0700 Subject: drm/i915: Implement batch and ring buffer dumping We create a debugfs node (i915_ringbuffer_data) to expose a hex dump of the ring buffer itself. We also expose another debugfs node (i915_ringbuffer_info) with information on the state (i.e. head, tail addresses) of the ringbuffer. For batchbuffer dumping, we look at the device's active_list, dumping each object which has I915_GEM_DOMAIN_COMMAND in its read domains. This is all exposed through the dri/i915_batchbuffers debugfs file with a header for each object (giving the objects gtt_offset so that it can be matched against the offset given in the BATCH_BUFFER_START command. Signed-off-by: Ben Gamari Signed-off-by: Carl Worth Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 317b122..efcd610 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -635,6 +635,8 @@ int i915_gem_attach_phys_object(struct drm_device *dev, void i915_gem_detach_phys_object(struct drm_device *dev, struct drm_gem_object *obj); void i915_gem_free_all_phys_object(struct drm_device *dev); +int i915_gem_object_get_pages(struct drm_gem_object *obj); +void i915_gem_object_put_pages(struct drm_gem_object *obj); /* i915_gem_tiling.c */ void i915_gem_detect_bit_6_swizzle(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 1449b45..33ab07b 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -43,8 +43,6 @@ static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, uint64_t offset, uint64_t size); static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj); -static int i915_gem_object_get_pages(struct drm_gem_object *obj); -static void i915_gem_object_put_pages(struct drm_gem_object *obj); static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment); @@ -1285,7 +1283,7 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, return 0; } -static void +void i915_gem_object_put_pages(struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = obj->driver_private; @@ -1884,7 +1882,7 @@ i915_gem_evict_everything(struct drm_device *dev) return ret; } -static int +int i915_gem_object_get_pages(struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = obj->driver_private; @@ -3243,7 +3241,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, exec_offset = exec_list[args->buffer_count - 1].offset; #if WATCH_EXEC - i915_gem_dump_object(object_list[args->buffer_count - 1], + i915_gem_dump_object(batch_obj, args->batch_len, __func__, ~0); diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c index a1ac0c5..986f108 100644 --- a/drivers/gpu/drm/i915/i915_gem_debugfs.c +++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c @@ -234,6 +234,96 @@ static int i915_hws_info(struct seq_file *m, void *data) return 0; } +static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_count) +{ + int page, i; + uint32_t *mem; + + for (page = 0; page < page_count; page++) { + mem = kmap(pages[page]); + for (i = 0; i < PAGE_SIZE; i += 4) + seq_printf(m, "%08x : %08x\n", i, mem[i / 4]); + kunmap(pages[page]); + } +} + +static int i915_batchbuffer_info(struct seq_file *m, void *data) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret; + + spin_lock(&dev_priv->mm.active_list_lock); + + list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) { + obj = obj_priv->obj; + if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) { + ret = i915_gem_object_get_pages(obj); + if (ret) { + DRM_ERROR("Failed to get pages: %d\n", ret); + spin_unlock(&dev_priv->mm.active_list_lock); + return ret; + } + + seq_printf(m, "--- gtt_offset = 0x%08x\n", obj_priv->gtt_offset); + i915_dump_pages(m, obj_priv->pages, obj->size / PAGE_SIZE); + + i915_gem_object_put_pages(obj); + } + } + + spin_unlock(&dev_priv->mm.active_list_lock); + + return 0; +} + +static int i915_ringbuffer_data(struct seq_file *m, void *data) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + u8 *virt; + uint32_t *ptr, off; + + if (!dev_priv->ring.ring_obj) { + seq_printf(m, "No ringbuffer setup\n"); + return 0; + } + + virt = dev_priv->ring.virtual_start; + + for (off = 0; off < dev_priv->ring.Size; off += 4) { + ptr = (uint32_t *)(virt + off); + seq_printf(m, "%08x : %08x\n", off, *ptr); + } + + return 0; +} + +static int i915_ringbuffer_info(struct seq_file *m, void *data) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + unsigned int head, tail, mask; + + head = I915_READ(PRB0_HEAD) & HEAD_ADDR; + tail = I915_READ(PRB0_TAIL) & TAIL_ADDR; + mask = dev_priv->ring.tail_mask; + + seq_printf(m, "RingHead : %08x\n", head); + seq_printf(m, "RingTail : %08x\n", tail); + seq_printf(m, "RingMask : %08x\n", mask); + seq_printf(m, "RingSize : %08lx\n", dev_priv->ring.Size); + seq_printf(m, "Acthd : %08x\n", I915_READ(IS_I965G(dev) ? ACTHD_I965 : ACTHD)); + + return 0; +} + + static struct drm_info_list i915_gem_debugfs_list[] = { {"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST}, {"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST}, @@ -243,6 +333,9 @@ static struct drm_info_list i915_gem_debugfs_list[] = { {"i915_gem_fence_regs", i915_gem_fence_regs_info, 0}, {"i915_gem_interrupt", i915_interrupt_info, 0}, {"i915_gem_hws", i915_hws_info, 0}, + {"i915_ringbuffer_data", i915_ringbuffer_data, 0}, + {"i915_ringbuffer_info", i915_ringbuffer_info, 0}, + {"i915_batchbuffers", i915_batchbuffer_info, 0}, }; #define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list) -- cgit v0.10.2 From 6115707be0e85a9b825f10e95143cb705b87fef8 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 3 Apr 2009 15:24:43 +0800 Subject: drm/i915: Fix a mismerge of the IGD patch (new .find_pll hooks missed) Signed-off-by: Shaohua Li Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 64773ce..c2c8e95 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -367,6 +367,7 @@ static const intel_limit_t intel_limits[] = { .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, + .find_pll = intel_find_best_PLL, }, { /* INTEL_LIMIT_IGD_LVDS */ .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, @@ -380,6 +381,7 @@ static const intel_limit_t intel_limits[] = { /* IGD only supports single-channel mode. */ .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW }, + .find_pll = intel_find_best_PLL, }, }; -- cgit v0.10.2 From 9dff6af860d6b7f661d4360eb859837afaca0a1b Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Thu, 2 Apr 2009 13:13:26 +0800 Subject: drm/i915: sync hdmi detection by hdmi identifier with 2D Currently we detect HDMI monitor by hardware detection, but if an HDMI-DVI adapter is used to connect a DVI monitor, hardware detection will incorrectly take monitor as HDMI. HDMI spec says any device containing IEEE registration identifier will be treated as HDMI device. The patch intends to detect HDMI monitor by drm_detect_hdmi_monitor function which follows that rule. Signed-off-by: Ma Ling Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index b06a4a3..5503742 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -38,7 +38,7 @@ struct intel_hdmi_priv { u32 sdvox_reg; u32 save_SDVOX; - int has_hdmi_sink; + bool has_hdmi_sink; }; static void intel_hdmi_mode_set(struct drm_encoder *encoder, @@ -128,6 +128,22 @@ static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder, return true; } +static void +intel_hdmi_sink_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv; + struct edid *edid = NULL; + + edid = drm_get_edid(&intel_output->base, + &intel_output->ddc_bus->adapter); + if (edid != NULL) { + hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid); + kfree(edid); + intel_output->base.display_info.raw_edid = NULL; + } +} + static enum drm_connector_status intel_hdmi_detect(struct drm_connector *connector) { @@ -158,9 +174,10 @@ intel_hdmi_detect(struct drm_connector *connector) return connector_status_unknown; } - if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) + if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) { + intel_hdmi_sink_detect(connector); return connector_status_connected; - else + } else return connector_status_disconnected; } diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 7b31f55..9913651 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1357,6 +1357,23 @@ void intel_sdvo_set_hotplug(struct drm_connector *connector, int on) intel_sdvo_read_response(intel_output, &response, 2); } +static void +intel_sdvo_hdmi_sink_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + struct edid *edid = NULL; + + intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); + edid = drm_get_edid(&intel_output->base, + &intel_output->ddc_bus->adapter); + if (edid != NULL) { + sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid); + kfree(edid); + intel_output->base.display_info.raw_edid = NULL; + } +} + static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector) { u8 response[2]; @@ -1371,9 +1388,10 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect if (status != SDVO_CMD_STATUS_SUCCESS) return connector_status_unknown; - if ((response[0] != 0) || (response[1] != 0)) + if ((response[0] != 0) || (response[1] != 0)) { + intel_sdvo_hdmi_sink_detect(connector); return connector_status_connected; - else + } else return connector_status_disconnected; } -- cgit v0.10.2 From 5b40f871158da7aaccff442645dae8b97c2e4d50 Mon Sep 17 00:00:00 2001 From: Ferenc Wagner Date: Mon, 6 Apr 2009 14:55:09 +0200 Subject: drm/i915: indicate framebuffer restore key in SysRq help message At the same time, bring the action message closer to the usual format. Signed-off-by: Ferenc Wagner Acked-by: Jesse Barnes Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index b7f0ebe..3e094be 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -864,8 +864,8 @@ static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3) static struct sysrq_key_op sysrq_intelfb_restore_op = { .handler = intelfb_sysrq, - .help_msg = "force fb", - .action_msg = "force restore of fb console", + .help_msg = "force-fb(G)", + .action_msg = "Restore framebuffer console", }; int intelfb_probe(struct drm_device *dev) -- cgit v0.10.2 From 2bc43b5cf5158a26fa1328234795abed2dff5275 Mon Sep 17 00:00:00 2001 From: Florian Mickler Date: Mon, 6 Apr 2009 22:55:41 +0200 Subject: drm/i915: Fix use of uninitialized var in 40a5f0de i915_gem_put_relocs_to_user returned an uninitialized value which got returned to userspace. This caused libdrm in my setup to never get out of a do{}while() loop retrying i915_gem_execbuffer. result was hanging X, overheating of cpu and 2-3gb of logfile-spam. This patch adresses the issue by 1. initializing vars in this file where necessary 2. correcting wrongly interpreted return values of copy_[from/to]_user Signed-off-by: Florian Mickler [anholt: cleanups of unnecessary changes, consistency in APIs] Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 33ab07b..6f7d0e2 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -141,15 +141,18 @@ fast_shmem_read(struct page **pages, int length) { char __iomem *vaddr; - int ret; + int unwritten; vaddr = kmap_atomic(pages[page_base >> PAGE_SHIFT], KM_USER0); if (vaddr == NULL) return -ENOMEM; - ret = __copy_to_user_inatomic(data, vaddr + page_offset, length); + unwritten = __copy_to_user_inatomic(data, vaddr + page_offset, length); kunmap_atomic(vaddr, KM_USER0); - return ret; + if (unwritten) + return -EFAULT; + + return 0; } static inline int @@ -3000,13 +3003,13 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, drm_free(*relocs, reloc_count * sizeof(**relocs), DRM_MEM_DRIVER); *relocs = NULL; - return ret; + return -EFAULT; } reloc_index += exec_list[i].relocation_count; } - return ret; + return 0; } static int @@ -3015,23 +3018,28 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list, struct drm_i915_gem_relocation_entry *relocs) { uint32_t reloc_count = 0, i; - int ret; + int ret = 0; for (i = 0; i < buffer_count; i++) { struct drm_i915_gem_relocation_entry __user *user_relocs; + int unwritten; user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr; - if (ret == 0) { - ret = copy_to_user(user_relocs, - &relocs[reloc_count], - exec_list[i].relocation_count * - sizeof(*relocs)); + unwritten = copy_to_user(user_relocs, + &relocs[reloc_count], + exec_list[i].relocation_count * + sizeof(*relocs)); + + if (unwritten) { + ret = -EFAULT; + goto err; } reloc_count += exec_list[i].relocation_count; } +err: drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER); return ret; @@ -3306,10 +3314,12 @@ err: (uintptr_t) args->buffers_ptr, exec_list, sizeof(*exec_list) * args->buffer_count); - if (ret) + if (ret) { + ret = -EFAULT; DRM_ERROR("failed to copy %d exec entries " "back to user (%d)\n", args->buffer_count, ret); + } } /* Copy the updated relocations out regardless of current error -- cgit v0.10.2 From 2b3fffefea993a94c386b2d96de2d09469c343d1 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 7 Apr 2009 21:21:42 -0700 Subject: befs: fix build on parisc fs/befs/super.c:85: error: 'PAGE_SIZE' undeclared Signed-off-by: Alexander Beregalov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/befs/super.c b/fs/befs/super.c index 41f2b4d..ca40f82 100644 --- a/fs/befs/super.c +++ b/fs/befs/super.c @@ -8,6 +8,7 @@ */ #include +#include /* for PAGE_SIZE */ #include "befs.h" #include "super.h" -- cgit v0.10.2 From 4c967291fc875a53de7126d256ad5e48f42a6521 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 7 Apr 2009 21:21:43 -0700 Subject: nommu: fix typo vma->pg_off to vma->vm_pgoff 6260a4b0521a41189b2c2a8119096c1e21dbdf2c ("/proc/pid/maps: don't show pgoff of pure ANON VMAs" had a typo. fs/proc/task_nommu.c:138: error: 'struct vm_area_struct' has no member named 'pg_off' distcc[21484] ERROR: compile fs/proc/task_nommu.c on sprygo/32 failed Signed-off-by: Nobuhiro Iwamatsu Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c index 12c2037..64a72e2 100644 --- a/fs/proc/task_nommu.c +++ b/fs/proc/task_nommu.c @@ -135,7 +135,7 @@ static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma) struct inode *inode = vma->vm_file->f_path.dentry->d_inode; dev = inode->i_sb->s_dev; ino = inode->i_ino; - pgoff = (loff_t)vma->pg_off << PAGE_SHIFT; + pgoff = (loff_t)vma->vm_pgoff << PAGE_SHIFT; } seq_printf(m, -- cgit v0.10.2 From 3a709703538c471530405556dda136fd0d82b0dc Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Tue, 7 Apr 2009 23:21:06 -0700 Subject: ptrace: some checkpatch fixes This fixes all the checkpatch --file complaints about kernel/ptrace.c and also removes an unused #include. I've verified that there are no changes to the compiled code on x86_64. Signed-off-by: Roland McGrath [ Removed the parts that just split a line - Linus ] Signed-off-by: Linus Torvalds diff --git a/kernel/ptrace.c b/kernel/ptrace.c index aaad0ec..64191fa 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -21,9 +21,7 @@ #include #include #include - -#include -#include +#include /* @@ -48,7 +46,7 @@ void __ptrace_link(struct task_struct *child, struct task_struct *new_parent) list_add(&child->ptrace_entry, &new_parent->ptraced); child->parent = new_parent; } - + /* * Turn a tracing stop into a normal stop now, since with no tracer there * would be no way to wake it up with SIGCONT or SIGKILL. If there was a @@ -173,7 +171,7 @@ bool ptrace_may_access(struct task_struct *task, unsigned int mode) task_lock(task); err = __ptrace_may_access(task, mode); task_unlock(task); - return (!err ? true : false); + return !err; } int ptrace_attach(struct task_struct *task) @@ -358,7 +356,7 @@ int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst copied += retval; src += retval; dst += retval; - len -= retval; + len -= retval; } return copied; } @@ -383,7 +381,7 @@ int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long ds copied += retval; src += retval; dst += retval; - len -= retval; + len -= retval; } return copied; } @@ -496,9 +494,9 @@ static int ptrace_resume(struct task_struct *child, long request, long data) if (unlikely(!arch_has_single_step())) return -EIO; user_enable_single_step(child); - } - else + } else { user_disable_single_step(child); + } child->exit_code = data; wake_up_process(child); -- cgit v0.10.2 From e5e9ecde63ba365b510df0f4a9cb3b048a0ad785 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 7 Apr 2009 16:01:22 -0700 Subject: drm/i915: Correctly set the write flag for get_user_pages in pread. Otherwise, the results of our read didn't show up when we were faulting in the page being read into (as happened with a testcase reading into a big stack area). Likely accounts for some conformance test failures. Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6f7d0e2..3a1189d 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -287,7 +287,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj, down_read(&mm->mmap_sem); pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr, - num_pages, 0, 0, user_pages, NULL); + num_pages, 1, 0, user_pages, NULL); up_read(&mm->mmap_sem); if (pinned_pages < num_pages) { ret = -EFAULT; -- cgit v0.10.2 From 280b713b5b0fd84cf2469098aee88acbb5de859c Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 12 Mar 2009 16:56:27 -0700 Subject: drm/i915: Allow tiling of objects with bit 17 swizzling by the CPU. Save the bit 17 state of the pages when freeing the page list, and reswizzle them if necessary when rebinding the pages (in case they were swapped out). Since we have userland with expectations that the swizzle enums let it pread and pwrite contents accurately, we can't expose a new swizzle enum for bit 17 (which it would have to GTT map to handle), so we handle it down in pread and pwrite by swizzling the copy when bit 17 of the page address is set. Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index efcd610..bccd414 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -446,6 +446,9 @@ struct drm_i915_gem_object { uint32_t tiling_mode; uint32_t stride; + /** Record of address bit 17 of each page at last unbind. */ + long *bit_17; + /** AGP mapping type (AGP_USER_MEMORY or AGP_USER_CACHED_MEMORY */ uint32_t agp_type; @@ -640,6 +643,8 @@ void i915_gem_object_put_pages(struct drm_gem_object *obj); /* i915_gem_tiling.c */ void i915_gem_detect_bit_6_swizzle(struct drm_device *dev); +void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj); +void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj); /* i915_gem_debug.c */ void i915_gem_dump_object(struct drm_gem_object *obj, int len, diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 3a1189d..6dca9fc 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -155,6 +155,15 @@ fast_shmem_read(struct page **pages, return 0; } +static int i915_gem_object_needs_bit17_swizzle(struct drm_gem_object *obj) +{ + drm_i915_private_t *dev_priv = obj->dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 && + obj_priv->tiling_mode != I915_TILING_NONE; +} + static inline int slow_shmem_copy(struct page *dst_page, int dst_offset, @@ -182,6 +191,64 @@ slow_shmem_copy(struct page *dst_page, return 0; } +static inline int +slow_shmem_bit17_copy(struct page *gpu_page, + int gpu_offset, + struct page *cpu_page, + int cpu_offset, + int length, + int is_read) +{ + char *gpu_vaddr, *cpu_vaddr; + + /* Use the unswizzled path if this page isn't affected. */ + if ((page_to_phys(gpu_page) & (1 << 17)) == 0) { + if (is_read) + return slow_shmem_copy(cpu_page, cpu_offset, + gpu_page, gpu_offset, length); + else + return slow_shmem_copy(gpu_page, gpu_offset, + cpu_page, cpu_offset, length); + } + + gpu_vaddr = kmap_atomic(gpu_page, KM_USER0); + if (gpu_vaddr == NULL) + return -ENOMEM; + + cpu_vaddr = kmap_atomic(cpu_page, KM_USER1); + if (cpu_vaddr == NULL) { + kunmap_atomic(gpu_vaddr, KM_USER0); + return -ENOMEM; + } + + /* Copy the data, XORing A6 with A17 (1). The user already knows he's + * XORing with the other bits (A9 for Y, A9 and A10 for X) + */ + while (length > 0) { + int cacheline_end = ALIGN(gpu_offset + 1, 64); + int this_length = min(cacheline_end - gpu_offset, length); + int swizzled_gpu_offset = gpu_offset ^ 64; + + if (is_read) { + memcpy(cpu_vaddr + cpu_offset, + gpu_vaddr + swizzled_gpu_offset, + this_length); + } else { + memcpy(gpu_vaddr + swizzled_gpu_offset, + cpu_vaddr + cpu_offset, + this_length); + } + cpu_offset += this_length; + gpu_offset += this_length; + length -= this_length; + } + + kunmap_atomic(cpu_vaddr, KM_USER1); + kunmap_atomic(gpu_vaddr, KM_USER0); + + return 0; +} + /** * This is the fast shmem pread path, which attempts to copy_from_user directly * from the backing pages of the object to the user's address space. On a @@ -270,6 +337,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj, int page_length; int ret; uint64_t data_ptr = args->data_ptr; + int do_bit17_swizzling; remain = args->size; @@ -294,6 +362,8 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj, goto fail_put_user_pages; } + do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj); + mutex_lock(&dev->struct_mutex); ret = i915_gem_object_get_pages(obj); @@ -328,11 +398,20 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj, if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; - ret = slow_shmem_copy(user_pages[data_page_index], - data_page_offset, - obj_priv->pages[shmem_page_index], - shmem_page_offset, - page_length); + if (do_bit17_swizzling) { + ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index], + shmem_page_offset, + user_pages[data_page_index], + data_page_offset, + page_length, + 1); + } else { + ret = slow_shmem_copy(user_pages[data_page_index], + data_page_offset, + obj_priv->pages[shmem_page_index], + shmem_page_offset, + page_length); + } if (ret) goto fail_put_pages; @@ -384,9 +463,14 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, return -EINVAL; } - ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv); - if (ret != 0) + if (i915_gem_object_needs_bit17_swizzle(obj)) { ret = i915_gem_shmem_pread_slow(dev, obj, args, file_priv); + } else { + ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv); + if (ret != 0) + ret = i915_gem_shmem_pread_slow(dev, obj, args, + file_priv); + } drm_gem_object_unreference(obj); @@ -728,6 +812,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, int page_length; int ret; uint64_t data_ptr = args->data_ptr; + int do_bit17_swizzling; remain = args->size; @@ -752,6 +837,8 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, goto fail_put_user_pages; } + do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj); + mutex_lock(&dev->struct_mutex); ret = i915_gem_object_get_pages(obj); @@ -786,11 +873,20 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; - ret = slow_shmem_copy(obj_priv->pages[shmem_page_index], - shmem_page_offset, - user_pages[data_page_index], - data_page_offset, - page_length); + if (do_bit17_swizzling) { + ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index], + shmem_page_offset, + user_pages[data_page_index], + data_page_offset, + page_length, + 0); + } else { + ret = slow_shmem_copy(obj_priv->pages[shmem_page_index], + shmem_page_offset, + user_pages[data_page_index], + data_page_offset, + page_length); + } if (ret) goto fail_put_pages; @@ -855,6 +951,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, ret = i915_gem_gtt_pwrite_slow(dev, obj, args, file_priv); } + } else if (i915_gem_object_needs_bit17_swizzle(obj)) { + ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file_priv); } else { ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file_priv); if (ret == -EFAULT) { @@ -1298,6 +1396,9 @@ i915_gem_object_put_pages(struct drm_gem_object *obj) if (--obj_priv->pages_refcount != 0) return; + if (obj_priv->tiling_mode != I915_TILING_NONE) + i915_gem_object_save_bit_17_swizzle(obj); + for (i = 0; i < page_count; i++) if (obj_priv->pages[i] != NULL) { if (obj_priv->dirty) @@ -1923,6 +2024,10 @@ i915_gem_object_get_pages(struct drm_gem_object *obj) } obj_priv->pages[i] = page; } + + if (obj_priv->tiling_mode != I915_TILING_NONE) + i915_gem_object_do_bit_17_swizzle(obj); + return 0; } @@ -3601,6 +3706,7 @@ void i915_gem_free_object(struct drm_gem_object *obj) i915_gem_free_mmap_offset(obj); drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER); + kfree(obj_priv->bit_17); drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); } diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 6be3f92..f27e523 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -25,6 +25,8 @@ * */ +#include "linux/string.h" +#include "linux/bitops.h" #include "drmP.h" #include "drm.h" #include "i915_drm.h" @@ -127,8 +129,8 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) swizzle_y = I915_BIT_6_SWIZZLE_9_11; } else { /* Bit 17 swizzling by the CPU in addition. */ - swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; - swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; + swizzle_x = I915_BIT_6_SWIZZLE_9_10_17; + swizzle_y = I915_BIT_6_SWIZZLE_9_17; } break; } @@ -288,6 +290,19 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x; else args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y; + + /* Hide bit 17 swizzling from the user. This prevents old Mesa + * from aborting the application on sw fallbacks to bit 17, + * and we use the pread/pwrite bit17 paths to swizzle for it. + * If there was a user that was relying on the swizzle + * information for drm_intel_bo_map()ed reads/writes this would + * break it, but we don't have any of those. + */ + if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17) + args->swizzle_mode = I915_BIT_6_SWIZZLE_9; + if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17) + args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10; + /* If we can't handle the swizzling, make it untiled. */ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) { args->tiling_mode = I915_TILING_NONE; @@ -354,8 +369,100 @@ i915_gem_get_tiling(struct drm_device *dev, void *data, DRM_ERROR("unknown tiling mode\n"); } + /* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */ + if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17) + args->swizzle_mode = I915_BIT_6_SWIZZLE_9; + if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17) + args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10; + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return 0; } + +/** + * Swap every 64 bytes of this page around, to account for it having a new + * bit 17 of its physical address and therefore being interpreted differently + * by the GPU. + */ +static int +i915_gem_swizzle_page(struct page *page) +{ + char *vaddr; + int i; + char temp[64]; + + vaddr = kmap(page); + if (vaddr == NULL) + return -ENOMEM; + + for (i = 0; i < PAGE_SIZE; i += 128) { + memcpy(temp, &vaddr[i], 64); + memcpy(&vaddr[i], &vaddr[i + 64], 64); + memcpy(&vaddr[i + 64], temp, 64); + } + + kunmap(page); + + return 0; +} + +void +i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int page_count = obj->size >> PAGE_SHIFT; + int i; + + if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17) + return; + + if (obj_priv->bit_17 == NULL) + return; + + for (i = 0; i < page_count; i++) { + char new_bit_17 = page_to_phys(obj_priv->pages[i]) >> 17; + if ((new_bit_17 & 0x1) != + (test_bit(i, obj_priv->bit_17) != 0)) { + int ret = i915_gem_swizzle_page(obj_priv->pages[i]); + if (ret != 0) { + DRM_ERROR("Failed to swizzle page\n"); + return; + } + set_page_dirty(obj_priv->pages[i]); + } + } +} + +void +i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int page_count = obj->size >> PAGE_SHIFT; + int i; + + if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17) + return; + + if (obj_priv->bit_17 == NULL) { + obj_priv->bit_17 = kmalloc(BITS_TO_LONGS(page_count) * + sizeof(long), GFP_KERNEL); + if (obj_priv->bit_17 == NULL) { + DRM_ERROR("Failed to allocate memory for bit 17 " + "record\n"); + return; + } + } + + for (i = 0; i < page_count; i++) { + if (page_to_phys(obj_priv->pages[i]) & (1 << 17)) + __set_bit(i, obj_priv->bit_17); + else + __clear_bit(i, obj_priv->bit_17); + } +} diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index 67e3353..95962fa 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -594,6 +594,9 @@ struct drm_i915_gem_busy { #define I915_BIT_6_SWIZZLE_9_10_11 4 /* Not seen by userland */ #define I915_BIT_6_SWIZZLE_UNKNOWN 5 +/* Seen by userland. */ +#define I915_BIT_6_SWIZZLE_9_17 6 +#define I915_BIT_6_SWIZZLE_9_10_17 7 struct drm_i915_gem_set_tiling { /** Handle of the buffer to have its tiling state updated */ -- cgit v0.10.2 From 3e44ddd44ea59354221b811605745ec453130c06 Mon Sep 17 00:00:00 2001 From: Jarkko Lavinen Date: Thu, 27 Nov 2008 14:30:32 +0200 Subject: mmc: Accept EXT_CSD rev 1.3 since it is backwards compatible with 1.2 Signed-off-by: Jarkko Lavinen Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index c232d11..06084db 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -208,7 +208,7 @@ static int mmc_read_ext_csd(struct mmc_card *card) } ext_csd_struct = ext_csd[EXT_CSD_REV]; - if (ext_csd_struct > 2) { + if (ext_csd_struct > 3) { printk(KERN_ERR "%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), ext_csd_struct); -- cgit v0.10.2 From b513b6cc0fcbb0ef733eec487618da7ea2d7cc61 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Wed, 25 Mar 2009 11:17:42 +0200 Subject: imxmmc: init-exit rework Add __init __exit for appropriate probe and remove functions. Conver to platform_driver_probe() Signed-off-by: Paulius Zaleckas Acked-by: Sascha Hauer Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index eb29b1d..0fa7af3 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -938,7 +938,7 @@ static void imxmci_check_status(unsigned long data) mod_timer(&host->timer, jiffies + (HZ>>1)); } -static int imxmci_probe(struct platform_device *pdev) +static int __init imxmci_probe(struct platform_device *pdev) { struct mmc_host *mmc; struct imxmci_host *host = NULL; @@ -1079,7 +1079,7 @@ out: return ret; } -static int imxmci_remove(struct platform_device *pdev) +static int __exit imxmci_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); @@ -1145,8 +1145,7 @@ static int imxmci_resume(struct platform_device *dev) #endif /* CONFIG_PM */ static struct platform_driver imxmci_driver = { - .probe = imxmci_probe, - .remove = imxmci_remove, + .remove = __exit_p(imxmci_remove), .suspend = imxmci_suspend, .resume = imxmci_resume, .driver = { @@ -1157,7 +1156,7 @@ static struct platform_driver imxmci_driver = { static int __init imxmci_init(void) { - return platform_driver_register(&imxmci_driver); + return platform_driver_probe(&imxmci_driver, imxmci_probe); } static void __exit imxmci_exit(void) -- cgit v0.10.2 From 34b28950168abd7ad55fe3493ea21f1340c7294a Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Wed, 25 Mar 2009 11:18:50 +0200 Subject: imxmmc: move RSSR BLR DMA request source (RSSR) needs to be set only once (in probe). DMA burst length (BLR) need to be set only in set_ios() This cleans up imxmci_setup_data() and should make it a little bit faster :) Signed-off-by: Paulius Zaleckas Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index 0fa7af3..e0be21a 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -307,13 +307,6 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) wmb(); - if (host->actual_bus_width == MMC_BUS_WIDTH_4) - BLR(host->dma) = 0; /* burst 64 byte read / 64 bytes write */ - else - BLR(host->dma) = 16; /* burst 16 byte read / 16 bytes write */ - - RSSR(host->dma) = DMA_REQ_SDHC; - set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); @@ -818,9 +811,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->bus_width == MMC_BUS_WIDTH_4) { host->actual_bus_width = MMC_BUS_WIDTH_4; imx_gpio_mode(PB11_PF_SD_DAT3); + BLR(host->dma) = 0; /* burst 64 byte read/write */ } else { host->actual_bus_width = MMC_BUS_WIDTH_1; imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); + BLR(host->dma) = 16; /* burst 16 byte read/write */ } if (host->power_mode != ios->power_mode) { @@ -1034,6 +1029,7 @@ static int __init imxmci_probe(struct platform_device *pdev) } host->dma_allocated = 1; imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host); + RSSR(host->dma) = DMA_REQ_SDHC; tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host); host->status_reg=0; -- cgit v0.10.2 From 32710e8fd537adeb53f98dec92e4a77caac512f5 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Wed, 8 Apr 2009 20:14:54 +0200 Subject: New mail address for Pierre Ossman Signed-off-by: Pierre Ossman diff --git a/MAINTAINERS b/MAINTAINERS index c3b2159..d96e745 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3057,7 +3057,7 @@ S: Supported MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM P: Pierre Ossman -M: drzeus-mmc@drzeus.cx +M: pierre@ossman.eu L: linux-kernel@vger.kernel.org S: Maintained @@ -3939,7 +3939,7 @@ S: Maintained SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER P: Pierre Ossman -M: drzeus-sdhci@drzeus.cx +M: pierre@ossman.eu L: sdhci-devel@lists.ossman.eu S: Maintained @@ -4926,7 +4926,7 @@ S: Maintained W83L51xD SD/MMC CARD INTERFACE DRIVER P: Pierre Ossman -M: drzeus-wbsd@drzeus.cx +M: pierre@ossman.eu L: linux-kernel@vger.kernel.org S: Maintained diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index c5b316e..cd37962 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -729,6 +729,6 @@ static void __exit sdhci_drv_exit(void) module_init(sdhci_drv_init); module_exit(sdhci_drv_exit); -MODULE_AUTHOR("Pierre Ossman "); +MODULE_AUTHOR("Pierre Ossman "); MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 30d8e3d..9234be2 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1935,7 +1935,7 @@ module_exit(sdhci_drv_exit); module_param(debug_quirks, uint, 0444); -MODULE_AUTHOR("Pierre Ossman "); +MODULE_AUTHOR("Pierre Ossman "); MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index adda379..89bf8cd 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -2036,7 +2036,7 @@ module_param_named(irq, param_irq, uint, 0444); module_param_named(dma, param_dma, int, 0444); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Pierre Ossman "); +MODULE_AUTHOR("Pierre Ossman "); MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver"); #ifdef CONFIG_PNP -- cgit v0.10.2 From 00adadc12196c7b3e8923729e728162267e98ff7 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 6 Apr 2009 15:01:19 +0300 Subject: omap_hsmmc: Flush posted write to IRQ Spurious IRQs seen on MMC after 2.6.29. Flush posted write in IRQ handler. The interrupt line is released by clearing the error status bits in the MMCHS_STAT register, which must occur before the interrupt handler returns to avoid unwanted irqs. Hence the need to flush the posted write. Signed-off-by: Kevin Hilman Signed-off-by: Adrian Hunter Acked-by: Tony Lindgen Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index d183be6..a752788 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -434,6 +434,8 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) if (host->mrq == NULL) { OMAP_HSMMC_WRITE(host->base, STAT, OMAP_HSMMC_READ(host->base, STAT)); + /* Flush posted write */ + OMAP_HSMMC_READ(host->base, STAT); return IRQ_HANDLED; } @@ -489,6 +491,8 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) } OMAP_HSMMC_WRITE(host->base, STAT, status); + /* Flush posted write */ + OMAP_HSMMC_READ(host->base, STAT); if (end_cmd || (status & CC)) mmc_omap_cmd_done(host, host->cmd); -- cgit v0.10.2 From 9d9f25c036dd584db175552a7d162403d3ab54b3 Mon Sep 17 00:00:00 2001 From: Wolfgang Muees Date: Tue, 7 Apr 2009 14:48:16 +0100 Subject: mmc_spi: do not check CID and CSD blocks with CRC16 Some cards are not able to calculate a valid CRC16 value for CID and CSD reads (CRC for 512 byte data blocks is OK). By moving the CRC enable after the read of CID and CSD, these cards can be used. This patch was tested with a faulty 8 GByte takeMS Class 6 SDHC card. This patch was suggested by Pierre Ossman. Signed-off-by: Wolfgang Muees Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 26fc098..cd81c39 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -363,15 +363,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, goto err; /* - * For SPI, enable CRC as appropriate. - */ - if (mmc_host_is_spi(host)) { - err = mmc_spi_set_crc(host, use_spi_crc); - if (err) - goto err; - } - - /* * Fetch CID from card. */ if (mmc_host_is_spi(host)) @@ -458,6 +449,18 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, } /* + * For SPI, enable CRC as appropriate. + * This CRC enable is located AFTER the reading of the + * card registers because some SDHC cards are not able + * to provide valid CRCs for non-512-byte blocks. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto free_card; + } + + /* * Attempt to change to high-speed (if supported) */ err = mmc_switch_hs(card); -- cgit v0.10.2 From 56e303ebeec7ef43dbd9d7998f8ad1a9f75d59bc Mon Sep 17 00:00:00 2001 From: Wolfgang Muees Date: Tue, 7 Apr 2009 15:26:30 +0100 Subject: mmc_spi: convert timeout handling to jiffies and avoid busy waiting SD/MMC card timeouts can be very high. So avoid busy-waiting, using the scheduler. Calculate all timeouts in jiffies units, because this will give us the correct sign when to involve the scheduler. Signed-off-by: Wolfgang Muees Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 72f8bde..ed02ebd 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -24,7 +24,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include +#include #include #include #include @@ -95,7 +95,7 @@ * reads which takes nowhere near that long. Older cards may be able to use * shorter timeouts ... but why bother? */ -#define r1b_timeout ktime_set(3, 0) +#define r1b_timeout (HZ * 3) /****************************************************************************/ @@ -183,12 +183,11 @@ mmc_spi_readbytes(struct mmc_spi_host *host, unsigned len) return status; } -static int -mmc_spi_skip(struct mmc_spi_host *host, ktime_t timeout, unsigned n, u8 byte) +static int mmc_spi_skip(struct mmc_spi_host *host, unsigned long timeout, + unsigned n, u8 byte) { u8 *cp = host->data->status; - - timeout = ktime_add(timeout, ktime_get()); + unsigned long start = jiffies; while (1) { int status; @@ -203,22 +202,26 @@ mmc_spi_skip(struct mmc_spi_host *host, ktime_t timeout, unsigned n, u8 byte) return cp[i]; } - /* REVISIT investigate msleep() to avoid busy-wait I/O - * in at least some cases. - */ - if (ktime_to_ns(ktime_sub(ktime_get(), timeout)) > 0) + if (time_is_before_jiffies(start + timeout)) break; + + /* If we need long timeouts, we may release the CPU. + * We use jiffies here because we want to have a relation + * between elapsed time and the blocking of the scheduler. + */ + if (time_is_before_jiffies(start+1)) + schedule(); } return -ETIMEDOUT; } static inline int -mmc_spi_wait_unbusy(struct mmc_spi_host *host, ktime_t timeout) +mmc_spi_wait_unbusy(struct mmc_spi_host *host, unsigned long timeout) { return mmc_spi_skip(host, timeout, sizeof(host->data->status), 0); } -static int mmc_spi_readtoken(struct mmc_spi_host *host, ktime_t timeout) +static int mmc_spi_readtoken(struct mmc_spi_host *host, unsigned long timeout) { return mmc_spi_skip(host, timeout, 1, 0xff); } @@ -607,7 +610,7 @@ mmc_spi_setup_data_message( */ static int mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t, - ktime_t timeout) + unsigned long timeout) { struct spi_device *spi = host->spi; int status, i; @@ -717,7 +720,7 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t, */ static int mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t, - ktime_t timeout) + unsigned long timeout) { struct spi_device *spi = host->spi; int status; @@ -803,7 +806,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, unsigned n_sg; int multiple = (data->blocks > 1); u32 clock_rate; - ktime_t timeout; + unsigned long timeout; if (data->flags & MMC_DATA_READ) direction = DMA_FROM_DEVICE; @@ -817,8 +820,9 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, else clock_rate = spi->max_speed_hz; - timeout = ktime_add_ns(ktime_set(0, 0), data->timeout_ns + - data->timeout_clks * 1000000 / clock_rate); + timeout = data->timeout_ns + + data->timeout_clks * 1000000 / clock_rate; + timeout = usecs_to_jiffies((unsigned int)(timeout / 1000)) + 1; /* Handle scatterlist segments one at a time, with synch for * each 512-byte block -- cgit v0.10.2 From d31f65e8464927f2cfdee6b0b01b9e3a8ce5db9c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 7 Apr 2009 17:04:33 -0700 Subject: mmc: Fix compile for omap_hsmmc.c This fixes the issue noted by Russell King: drivers/mmc/host/omap_hsmmc.c: In function 'mmc_omap_xfer_done': drivers/mmc/host/omap_hsmmc.c:301: error: implicit declaration of function 'mmc_omap_fclk_lazy_disable' This got broken by 4a694dc915c9a223044ce21fc0d99e63facd1d64. Signed-off-by: Tony Lindgren Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index a752788..d765df2 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -298,7 +298,6 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) struct mmc_request *mrq = host->mrq; host->mrq = NULL; - mmc_omap_fclk_lazy_disable(host); mmc_request_done(host->mmc, mrq); return; } -- cgit v0.10.2 From a8fe29d8bcdfbf85ba26c7f3522c4bdfbc83e71d Mon Sep 17 00:00:00 2001 From: Jarkko Lavinen Date: Wed, 8 Apr 2009 11:18:32 +0300 Subject: omap_hsmmc: Do not expect cmd/data to be non-null when CC/TC occurs With spurious interrupt cmd can be null even when we have CC set in irq status. Fixes: NB#106295 - prevent potential kernel crash in the MMC driver Signed-off-by: Jarkko Lavinen Signed-off-by: Adrian Hunter Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index d765df2..e62a22a 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -493,7 +493,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) /* Flush posted write */ OMAP_HSMMC_READ(host->base, STAT); - if (end_cmd || (status & CC)) + if (end_cmd || ((status & CC) && host->cmd)) mmc_omap_cmd_done(host, host->cmd); if (end_trans || (status & TC)) mmc_omap_xfer_done(host, data); -- cgit v0.10.2 From ab5a643cf597f2214feb6ff7288c72589661bde1 Mon Sep 17 00:00:00 2001 From: Wolfgang Muees Date: Wed, 8 Apr 2009 09:48:58 +0100 Subject: mmc_spi: support for non-byte-aligned cards A very large subset of SD cards in the market send their responses and data non-byte-aligned. So add logic to the mmc spi driver to handle this mess. Signed-off-by: Wolfgang Muees Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index ed02ebd..f48349d 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -254,6 +254,10 @@ static int mmc_spi_response_get(struct mmc_spi_host *host, u8 *cp = host->data->status; u8 *end = cp + host->t.len; int value = 0; + int bitshift; + u8 leftover = 0; + unsigned short rotator; + int i; char tag[32]; snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s", @@ -271,9 +275,8 @@ static int mmc_spi_response_get(struct mmc_spi_host *host, /* Data block reads (R1 response types) may need more data... */ if (cp == end) { - unsigned i; - cp = host->data->status; + end = cp+1; /* Card sends N(CR) (== 1..8) bytes of all-ones then one * status byte ... and we already scanned 2 bytes. @@ -298,20 +301,34 @@ static int mmc_spi_response_get(struct mmc_spi_host *host, } checkstatus: - if (*cp & 0x80) { - dev_dbg(&host->spi->dev, "%s: INVALID RESPONSE, %02x\n", - tag, *cp); - value = -EBADR; - goto done; + bitshift = 0; + if (*cp & 0x80) { + /* Houston, we have an ugly card with a bit-shifted response */ + rotator = *cp++ << 8; + /* read the next byte */ + if (cp == end) { + value = mmc_spi_readbytes(host, 1); + if (value < 0) + goto done; + cp = host->data->status; + end = cp+1; + } + rotator |= *cp++; + while (rotator & 0x8000) { + bitshift++; + rotator <<= 1; + } + cmd->resp[0] = rotator >> 8; + leftover = rotator; + } else { + cmd->resp[0] = *cp++; } - - cmd->resp[0] = *cp++; cmd->error = 0; /* Status byte: the entire seven-bit R1 response. */ if (cmd->resp[0] != 0) { if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS - | R1_SPI_ILLEGAL_COMMAND) + | R1_SPI_ILLEGAL_COMMAND) & cmd->resp[0]) value = -EINVAL; else if (R1_SPI_COM_CRC & cmd->resp[0]) @@ -339,12 +356,45 @@ checkstatus: * SPI R5 == R1 + data byte; IO_RW_DIRECT */ case MMC_RSP_SPI_R2: - cmd->resp[0] |= *cp << 8; + /* read the next byte */ + if (cp == end) { + value = mmc_spi_readbytes(host, 1); + if (value < 0) + goto done; + cp = host->data->status; + end = cp+1; + } + if (bitshift) { + rotator = leftover << 8; + rotator |= *cp << bitshift; + cmd->resp[0] |= (rotator & 0xFF00); + } else { + cmd->resp[0] |= *cp << 8; + } break; /* SPI R3, R4, or R7 == R1 + 4 bytes */ case MMC_RSP_SPI_R3: - cmd->resp[1] = get_unaligned_be32(cp); + rotator = leftover << 8; + cmd->resp[1] = 0; + for (i = 0; i < 4; i++) { + cmd->resp[1] <<= 8; + /* read the next byte */ + if (cp == end) { + value = mmc_spi_readbytes(host, 1); + if (value < 0) + goto done; + cp = host->data->status; + end = cp+1; + } + if (bitshift) { + rotator |= *cp++ << bitshift; + cmd->resp[1] |= (rotator >> 8); + rotator <<= 8; + } else { + cmd->resp[1] |= *cp++; + } + } break; /* SPI R1 == just one status byte */ @@ -725,6 +775,8 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t, struct spi_device *spi = host->spi; int status; struct scratch *scratch = host->data; + unsigned int bitshift; + u8 leftover; /* At least one SD card sends an all-zeroes byte when N(CX) * applies, before the all-ones bytes ... just cope with that. @@ -736,38 +788,60 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t, if (status == 0xff || status == 0) status = mmc_spi_readtoken(host, timeout); - if (status == SPI_TOKEN_SINGLE) { - if (host->dma_dev) { - dma_sync_single_for_device(host->dma_dev, - host->data_dma, sizeof(*scratch), - DMA_BIDIRECTIONAL); - dma_sync_single_for_device(host->dma_dev, - t->rx_dma, t->len, - DMA_FROM_DEVICE); - } + if (status < 0) { + dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status); + return status; + } - status = spi_sync(spi, &host->m); + /* The token may be bit-shifted... + * the first 0-bit precedes the data stream. + */ + bitshift = 7; + while (status & 0x80) { + status <<= 1; + bitshift--; + } + leftover = status << 1; - if (host->dma_dev) { - dma_sync_single_for_cpu(host->dma_dev, - host->data_dma, sizeof(*scratch), - DMA_BIDIRECTIONAL); - dma_sync_single_for_cpu(host->dma_dev, - t->rx_dma, t->len, - DMA_FROM_DEVICE); - } + if (host->dma_dev) { + dma_sync_single_for_device(host->dma_dev, + host->data_dma, sizeof(*scratch), + DMA_BIDIRECTIONAL); + dma_sync_single_for_device(host->dma_dev, + t->rx_dma, t->len, + DMA_FROM_DEVICE); + } - } else { - dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status); + status = spi_sync(spi, &host->m); - /* we've read extra garbage, timed out, etc */ - if (status < 0) - return status; + if (host->dma_dev) { + dma_sync_single_for_cpu(host->dma_dev, + host->data_dma, sizeof(*scratch), + DMA_BIDIRECTIONAL); + dma_sync_single_for_cpu(host->dma_dev, + t->rx_dma, t->len, + DMA_FROM_DEVICE); + } - /* low four bits are an R2 subset, fifth seems to be - * vendor specific ... map them all to generic error.. + if (bitshift) { + /* Walk through the data and the crc and do + * all the magic to get byte-aligned data. */ - return -EIO; + u8 *cp = t->rx_buf; + unsigned int len; + unsigned int bitright = 8 - bitshift; + u8 temp; + for (len = t->len; len; len--) { + temp = *cp; + *cp++ = leftover | (temp >> bitshift); + leftover = temp << bitright; + } + cp = (u8 *) &scratch->crc_val; + temp = *cp; + *cp++ = leftover | (temp >> bitshift); + leftover = temp << bitright; + temp = *cp; + *cp = leftover | (temp >> bitshift); } if (host->mmc->use_spi_crc) { -- cgit v0.10.2 From d6382bf77e30799b78f19c0a129d4a9e0e9f2e2a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 20 Feb 2009 23:01:26 -0800 Subject: xen: disable preempt for leave_lazy_mmu xen_mc_flush() requires preemption to be disabled for its own sanity, so disable it while we're flushing. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index db3802f..b6e5659 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1819,7 +1819,6 @@ __init void xen_post_allocator_init(void) xen_mark_init_mm_pinned(); } - const struct pv_mmu_ops xen_mmu_ops __initdata = { .pagetable_setup_start = xen_pagetable_setup_start, .pagetable_setup_done = xen_pagetable_setup_done, -- cgit v0.10.2 From e791ca0fd79461ad72559a6e01362da4d7d16253 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 26 Feb 2009 15:48:33 -0800 Subject: xen: separate p2m allocation from setting When doing very early p2m setting, we need to separate setting from allocation, so split things up accordingly. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index b6e5659..0b2d554 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -233,47 +233,74 @@ unsigned long get_phys_to_machine(unsigned long pfn) } EXPORT_SYMBOL_GPL(get_phys_to_machine); -static void alloc_p2m(unsigned long **pp, unsigned long *mfnp) +/* install a new p2m_top page */ +bool install_p2mtop_page(unsigned long pfn, unsigned long *p) { - unsigned long *p; + unsigned topidx = p2m_top_index(pfn); + unsigned long **pfnp, *mfnp; unsigned i; - p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL); - BUG_ON(p == NULL); + pfnp = &p2m_top[topidx]; + mfnp = &p2m_top_mfn[topidx]; for (i = 0; i < P2M_ENTRIES_PER_PAGE; i++) p[i] = INVALID_P2M_ENTRY; - if (cmpxchg(pp, p2m_missing, p) != p2m_missing) - free_page((unsigned long)p); - else + if (cmpxchg(pfnp, p2m_missing, p) == p2m_missing) { *mfnp = virt_to_mfn(p); + return true; + } + + return false; } -void set_phys_to_machine(unsigned long pfn, unsigned long mfn) +static void alloc_p2m(unsigned long pfn) { - unsigned topidx, idx; + unsigned long *p; - if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) { - BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); - return; - } + p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL); + BUG_ON(p == NULL); + + if (!install_p2mtop_page(pfn, p)) + free_page((unsigned long)p); +} + +/* Try to install p2m mapping; fail if intermediate bits missing */ +bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + unsigned topidx, idx; if (unlikely(pfn >= MAX_DOMAIN_PAGES)) { BUG_ON(mfn != INVALID_P2M_ENTRY); - return; + return true; } topidx = p2m_top_index(pfn); if (p2m_top[topidx] == p2m_missing) { - /* no need to allocate a page to store an invalid entry */ if (mfn == INVALID_P2M_ENTRY) - return; - alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]); + return true; + return false; } idx = p2m_index(pfn); p2m_top[topidx][idx] = mfn; + + return true; +} + +void set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) { + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return; + } + + if (unlikely(!__set_phys_to_machine(pfn, mfn))) { + alloc_p2m(pfn); + + if (!__set_phys_to_machine(pfn, mfn)) + BUG(); + } } unsigned long arbitrary_virt_to_mfn(void *vaddr) diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index 24d1b44..da73026 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -11,6 +11,9 @@ enum pt_level { }; +bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn); +bool install_p2mtop_page(unsigned long pfn, unsigned long *p); + void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); -- cgit v0.10.2 From cdaead6b4e657f960d6d6f9f380e7dfeedc6a09b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 27 Feb 2009 15:34:59 -0800 Subject: xen: split construction of p2m mfn tables from registration Build the p2m_mfn_list_list early with the rest of the p2m table, but register it later when the real shared_info structure is in place. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 0b2d554..6e58acd 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -184,7 +184,7 @@ static inline unsigned p2m_index(unsigned long pfn) } /* Build the parallel p2m_top_mfn structures */ -void xen_setup_mfn_list_list(void) +static void __init xen_build_mfn_list_list(void) { unsigned pfn, idx; @@ -198,7 +198,10 @@ void xen_setup_mfn_list_list(void) unsigned topidx = idx * P2M_ENTRIES_PER_PAGE; p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]); } +} +void xen_setup_mfn_list_list(void) +{ BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list = @@ -218,6 +221,8 @@ void __init xen_build_dynamic_phys_to_machine(void) p2m_top[topidx] = &mfn_list[pfn]; } + + xen_build_mfn_list_list(); } unsigned long get_phys_to_machine(unsigned long pfn) -- cgit v0.10.2 From c7da8c829b3f919089ff021d6ddc376d38299729 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 4 Mar 2009 13:02:18 -0800 Subject: xen: clean up xen_load_gdt Makes the logic a bit clearer. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 82cd39a..8e02455 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -301,10 +301,21 @@ static void xen_load_gdt(const struct desc_ptr *dtr) frames = mcs.args; for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) { - frames[f] = arbitrary_virt_to_mfn((void *)va); + int level; + pte_t *ptep = lookup_address(va, &level); + unsigned long pfn, mfn; + void *virt; + + BUG_ON(ptep == NULL); + + pfn = pte_pfn(*ptep); + mfn = pfn_to_mfn(pfn); + virt = __va(PFN_PHYS(pfn)); + + frames[f] = mfn; make_lowmem_page_readonly((void *)va); - make_lowmem_page_readonly(mfn_to_virt(frames[f])); + make_lowmem_page_readonly(virt); } MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct)); -- cgit v0.10.2 From a957fac50023eac09368ab19d3a7ec725c2657c3 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 4 Mar 2009 15:26:00 -0800 Subject: xen: make xen_load_gdt simpler Remove use of multicall machinery which is unused (gdt loading is never performance critical). This removes the implicit use of percpu variables, which simplifies understanding how the percpu code's use of load_gdt interacts with this code. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 8e02455..334d2ff 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -284,12 +284,11 @@ static void xen_set_ldt(const void *addr, unsigned entries) static void xen_load_gdt(const struct desc_ptr *dtr) { - unsigned long *frames; unsigned long va = dtr->address; unsigned int size = dtr->size + 1; unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE; + unsigned long frames[pages]; int f; - struct multicall_space mcs; /* A GDT can be up to 64k in size, which corresponds to 8192 8-byte entries, or 16 4k pages.. */ @@ -297,9 +296,6 @@ static void xen_load_gdt(const struct desc_ptr *dtr) BUG_ON(size > 65536); BUG_ON(va & ~PAGE_MASK); - mcs = xen_mc_entry(sizeof(*frames) * pages); - frames = mcs.args; - for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) { int level; pte_t *ptep = lookup_address(va, &level); @@ -314,13 +310,15 @@ static void xen_load_gdt(const struct desc_ptr *dtr) frames[f] = mfn; + printk("xen_load_gdt: %d va=%p mfn=%lx pfn=%lx va'=%p\n", + f, (void *)va, mfn, pfn, virt); + make_lowmem_page_readonly((void *)va); make_lowmem_page_readonly(virt); } - MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct)); - - xen_mc_issue(PARAVIRT_LAZY_CPU); + if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct))) + BUG(); } static void load_TLS_descriptor(struct thread_struct *t, -- cgit v0.10.2 From c667d5d6a77a5f33f9181bcf92a04fdc69712a2b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 4 Mar 2009 16:34:27 -0800 Subject: xen: remove xen_load_gdt debug Don't need the noise. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 334d2ff..5d9a1c3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -310,9 +310,6 @@ static void xen_load_gdt(const struct desc_ptr *dtr) frames[f] = mfn; - printk("xen_load_gdt: %d va=%p mfn=%lx pfn=%lx va'=%p\n", - f, (void *)va, mfn, pfn, virt); - make_lowmem_page_readonly((void *)va); make_lowmem_page_readonly(virt); } -- cgit v0.10.2 From 1207cf8eb99d8c699919e352292bdf1f519fbba5 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Thu, 5 Mar 2009 20:13:57 +0100 Subject: NULL noise: arch/x86/xen/smp.c Fix this sparse warnings: arch/x86/xen/smp.c:316:52: warning: Using plain integer as NULL pointer arch/x86/xen/smp.c:421:60: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 585a6e3..429834e 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -317,7 +317,7 @@ static int __cpuinit xen_cpu_up(unsigned int cpu) BUG_ON(rc); while(per_cpu(cpu_state, cpu) != CPU_ONLINE) { - HYPERVISOR_sched_op(SCHEDOP_yield, 0); + HYPERVISOR_sched_op(SCHEDOP_yield, NULL); barrier(); } @@ -422,7 +422,7 @@ static void xen_smp_send_call_function_ipi(const struct cpumask *mask) /* Make sure other vcpus get a chance to run if they need to. */ for_each_cpu(cpu, mask) { if (xen_vcpu_stolen(cpu)) { - HYPERVISOR_sched_op(SCHEDOP_yield, 0); + HYPERVISOR_sched_op(SCHEDOP_yield, NULL); break; } } -- cgit v0.10.2 From 191216b9289ed02256086e6bab4f668112109399 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 7 Mar 2009 17:09:27 -0800 Subject: xen: mask XSAVE from cpuid Xen leaves XSAVE set in cpuid, but doesn't allow cr4.OSXSAVE to be set. This confuses the kernel and it ends up crashing on an xsetbv instruction. At boot time, try to set cr4.OSXSAVE, and mask XSAVE out of cpuid it we can't. This will produce a spurious error from Xen, but allows us to support XSAVE if/when Xen does. This also factors out the cpuid mask decisions to boot time. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 5d9a1c3..69de191 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -168,21 +168,23 @@ static void __init xen_banner(void) xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : ""); } +static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0; +static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0; + static void xen_cpuid(unsigned int *ax, unsigned int *bx, unsigned int *cx, unsigned int *dx) { + unsigned maskecx = ~0; unsigned maskedx = ~0; /* * Mask out inconvenient features, to try and disable as many * unsupported kernel subsystems as possible. */ - if (*ax == 1) - maskedx = ~((1 << X86_FEATURE_APIC) | /* disable APIC */ - (1 << X86_FEATURE_ACPI) | /* disable ACPI */ - (1 << X86_FEATURE_MCE) | /* disable MCE */ - (1 << X86_FEATURE_MCA) | /* disable MCA */ - (1 << X86_FEATURE_ACC)); /* thermal monitoring */ + if (*ax == 1) { + maskecx = cpuid_leaf1_ecx_mask; + maskedx = cpuid_leaf1_edx_mask; + } asm(XEN_EMULATE_PREFIX "cpuid" : "=a" (*ax), @@ -190,9 +192,43 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, "=c" (*cx), "=d" (*dx) : "0" (*ax), "2" (*cx)); + + *cx &= maskecx; *dx &= maskedx; } +static __init void xen_init_cpuid_mask(void) +{ + unsigned int ax, bx, cx, dx; + + cpuid_leaf1_edx_mask = + ~((1 << X86_FEATURE_MCE) | /* disable MCE */ + (1 << X86_FEATURE_MCA) | /* disable MCA */ + (1 << X86_FEATURE_ACC)); /* thermal monitoring */ + + if (!xen_initial_domain()) + cpuid_leaf1_edx_mask &= + ~((1 << X86_FEATURE_APIC) | /* disable local APIC */ + (1 << X86_FEATURE_ACPI)); /* disable ACPI */ + + ax = 1; + xen_cpuid(&ax, &bx, &cx, &dx); + + /* cpuid claims we support xsave; try enabling it to see what happens */ + if (cx & (1 << (X86_FEATURE_XSAVE % 32))) { + unsigned long cr4; + + set_in_cr4(X86_CR4_OSXSAVE); + + cr4 = read_cr4(); + + if ((cr4 & X86_CR4_OSXSAVE) == 0) + cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32)); + + clear_in_cr4(X86_CR4_OSXSAVE); + } +} + static void xen_set_debugreg(int reg, unsigned long val) { HYPERVISOR_set_debugreg(reg, val); @@ -903,6 +939,8 @@ asmlinkage void __init xen_start_kernel(void) xen_init_irq_ops(); + xen_init_cpuid_mask(); + #ifdef CONFIG_X86_LOCAL_APIC /* * set up the basic apic ops. -- cgit v0.10.2 From 10eceebeaac3049cad018d4a77c941a602cbd7a5 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sun, 8 Mar 2009 03:59:04 -0700 Subject: x86-64: remove PGE from must-have feature list PGE may not be available when running paravirtualized, so test the cpuid bit before using it. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h index d5cd6c5..a4737dd 100644 --- a/arch/x86/include/asm/required-features.h +++ b/arch/x86/include/asm/required-features.h @@ -50,7 +50,7 @@ #ifdef CONFIG_X86_64 #define NEED_PSE 0 #define NEED_MSR (1<<(X86_FEATURE_MSR & 31)) -#define NEED_PGE (1<<(X86_FEATURE_PGE & 31)) +#define NEED_PGE 0 #define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31)) #define NEED_XMM (1<<(X86_FEATURE_XMM & 31)) #define NEED_XMM2 (1<<(X86_FEATURE_XMM2 & 31)) -- cgit v0.10.2 From b40bf53effc0338ad7926aa1abce703af372cbd4 Mon Sep 17 00:00:00 2001 From: Alex Nixon Date: Mon, 9 Feb 2009 12:05:46 -0800 Subject: Xen: Add virt_to_pfn helper function Signed-off-by: Alex Nixon diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 1a918dd..018a0a4 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -124,7 +124,8 @@ static inline unsigned long mfn_to_local_pfn(unsigned long mfn) /* VIRT <-> MACHINE conversion */ #define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v)))) -#define virt_to_mfn(v) (pfn_to_mfn(PFN_DOWN(__pa(v)))) +#define virt_to_pfn(v) (PFN_DOWN(__pa(v))) +#define virt_to_mfn(v) (pfn_to_mfn(virt_to_pfn(v))) #define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) static inline unsigned long pte_mfn(pte_t pte) -- cgit v0.10.2 From 8bd239d2ef00ed3319bf7384acd19c8253f0bb68 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Apr 2009 01:32:20 +0100 Subject: [ARM] 5447/1: Add SZ_32K This adds a SZ_32K define to the available sizes. I need it for an upcoming platform support. Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index c10d1aa..ada93a8 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -32,6 +32,7 @@ #define SZ_4K 0x00001000 #define SZ_8K 0x00002000 #define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 #define SZ_64K 0x00010000 #define SZ_128K 0x00020000 #define SZ_256K 0x00040000 -- cgit v0.10.2 From d0176f612f5c3edca00b9d0cc65555ad34843ec7 Mon Sep 17 00:00:00 2001 From: Justin Waters Date: Fri, 3 Apr 2009 21:03:59 +0100 Subject: [ARM] 5445/1: AT91: Remove flexible array from USBH platform data The flexible array in the USBH platform data is not safe to copy. The compiler will not allocate any extra memory for the non-init platform data structure (in the *_devices.c files) since it isn't given any defaults at compile time. When the probe function attempts to address that array, it will actually attempt to access data in an adjacent structure. Since there are currently no (known) implementations of the at91 USBH IP with more than 2 vbus pins, I am capping the value at 2. If somebody tries to assign more, then the compiler will produce a warning. Signed-off-by: Justin Waters Acked-by: David Brownell Acked-by: Andrew Victor Signed-off-by: Russell King diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 793fe7b..e6afff8 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -87,7 +87,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data); /* USB Host */ struct at91_usbh_data { u8 ports; /* number of ports on root hub */ - u8 vbus_pin[]; /* port power-control pin */ + u8 vbus_pin[2]; /* port power-control pin */ }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); -- cgit v0.10.2 From 3d6fdf7563d0a67c6973cf421f7405524ed8bdaf Mon Sep 17 00:00:00 2001 From: Justin Waters Date: Fri, 3 Apr 2009 21:06:53 +0100 Subject: [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the array Currently, the vbus_pin assignment loop is limited by the value of the "ports" variable in the platform data. Now that the vbus_pin array is no longer flexible, we can use its actual size. Signed-off-by: Justin Waters Acked-by: Andrew Victor Signed-off-by: Russell King diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 4ed228a..bb5e6f6 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -280,7 +280,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) * are always powered while this driver is active, and use * active-low power switches. */ - for (i = 0; i < pdata->ports; i++) { + for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (pdata->vbus_pin[i] <= 0) continue; gpio_request(pdata->vbus_pin[i], "ohci_vbus"); @@ -298,7 +298,7 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) int i; if (pdata) { - for (i = 0; i < pdata->ports; i++) { + for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (pdata->vbus_pin[i] <= 0) continue; gpio_direction_output(pdata->vbus_pin[i], 1); -- cgit v0.10.2 From d2ca39f262806aa2f035f680a14aa55ff9e3d889 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 8 Apr 2009 13:42:33 -0700 Subject: RDMA/cma: Create cm id even when IB port is down When doing rdma_resolve_addr(), if the relevant IB port is down, the function fails and the cm_id is not bound to the correct device. Therefore, application does not have a device handle and cannot wait for the port to become active. The function fails because the underlying IPoIB interface is not joined to the broadcast group and therefore the SA does not have a multicast record to take a Q_Key from. The fix is to use lazy Q_Key resolution - cma_set_qkey() will set id_priv->qkey if it was not set, and will be called just before the Q_Key is really required. Signed-off-by: Yossi Etigin Acked-by: Sean Hefty Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 3f9c03a..851de83 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -297,21 +297,25 @@ static void cma_detach_from_dev(struct rdma_id_private *id_priv) id_priv->cma_dev = NULL; } -static int cma_set_qkey(struct ib_device *device, u8 port_num, - enum rdma_port_space ps, - struct rdma_dev_addr *dev_addr, u32 *qkey) +static int cma_set_qkey(struct rdma_id_private *id_priv) { struct ib_sa_mcmember_rec rec; int ret = 0; - switch (ps) { + if (id_priv->qkey) + return 0; + + switch (id_priv->id.ps) { case RDMA_PS_UDP: - *qkey = RDMA_UDP_QKEY; + id_priv->qkey = RDMA_UDP_QKEY; break; case RDMA_PS_IPOIB: - ib_addr_get_mgid(dev_addr, &rec.mgid); - ret = ib_sa_get_mcmember_rec(device, port_num, &rec.mgid, &rec); - *qkey = be32_to_cpu(rec.qkey); + ib_addr_get_mgid(&id_priv->id.route.addr.dev_addr, &rec.mgid); + ret = ib_sa_get_mcmember_rec(id_priv->id.device, + id_priv->id.port_num, &rec.mgid, + &rec); + if (!ret) + id_priv->qkey = be32_to_cpu(rec.qkey); break; default: break; @@ -341,12 +345,7 @@ static int cma_acquire_dev(struct rdma_id_private *id_priv) ret = ib_find_cached_gid(cma_dev->device, &gid, &id_priv->id.port_num, NULL); if (!ret) { - ret = cma_set_qkey(cma_dev->device, - id_priv->id.port_num, - id_priv->id.ps, dev_addr, - &id_priv->qkey); - if (!ret) - cma_attach_to_dev(id_priv, cma_dev); + cma_attach_to_dev(id_priv, cma_dev); break; } } @@ -578,6 +577,10 @@ static int cma_ib_init_qp_attr(struct rdma_id_private *id_priv, *qp_attr_mask = IB_QP_STATE | IB_QP_PKEY_INDEX | IB_QP_PORT; if (cma_is_ud_ps(id_priv->id.ps)) { + ret = cma_set_qkey(id_priv); + if (ret) + return ret; + qp_attr->qkey = id_priv->qkey; *qp_attr_mask |= IB_QP_QKEY; } else { @@ -2201,6 +2204,12 @@ static int cma_sidr_rep_handler(struct ib_cm_id *cm_id, event.status = ib_event->param.sidr_rep_rcvd.status; break; } + ret = cma_set_qkey(id_priv); + if (ret) { + event.event = RDMA_CM_EVENT_ADDR_ERROR; + event.status = -EINVAL; + break; + } if (id_priv->qkey != rep->qkey) { event.event = RDMA_CM_EVENT_UNREACHABLE; event.status = -EINVAL; @@ -2480,10 +2489,14 @@ static int cma_send_sidr_rep(struct rdma_id_private *id_priv, const void *private_data, int private_data_len) { struct ib_cm_sidr_rep_param rep; + int ret; memset(&rep, 0, sizeof rep); rep.status = status; if (status == IB_SIDR_SUCCESS) { + ret = cma_set_qkey(id_priv); + if (ret) + return ret; rep.qp_num = id_priv->qp_num; rep.qkey = id_priv->qkey; } -- cgit v0.10.2 From 8851d3712a73649e1ae0d4620e7690c8db8742df Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 8 Apr 2009 13:46:14 -0700 Subject: [IA64] wire up preadv/pwritev system calls Gerd Hoffmann added these to Linux. Let ia64 use them. Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 9015979..10a9eb0 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -308,11 +308,13 @@ #define __NR_dup3 1316 #define __NR_pipe2 1317 #define __NR_inotify_init1 1318 +#define __NR_preadv 1319 +#define __NR_pwritev 1320 #ifdef __KERNEL__ -#define NR_syscalls 295 /* length of syscall table */ +#define NR_syscalls 297 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 8dc6966..7bebac0 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1803,6 +1803,8 @@ sys_call_table: data8 sys_dup3 data8 sys_pipe2 data8 sys_inotify_init1 + data8 sys_preadv + data8 sys_pwritev // 1320 .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */ -- cgit v0.10.2 From 6a3335b43342b42dd6c69b4bbbde15d622cb49ca Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 8 Apr 2009 13:52:01 -0700 Subject: IPoIB: Document newish features Update the documentation to include connected mode, stateless offloads and interrupt moderation, and add a reference to the connected mode RFC. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt index 864ff32..6d40f00 100644 --- a/Documentation/infiniband/ipoib.txt +++ b/Documentation/infiniband/ipoib.txt @@ -24,6 +24,49 @@ Partitions and P_Keys The P_Key for any interface is given by the "pkey" file, and the main interface for a subinterface is in "parent." +Datagram vs Connected modes + + The IPoIB driver supports two modes of operation: datagram and + connected. The mode is set and read through an interface's + /sys/class/net//mode file. + + In datagram mode, the IB UD (Unreliable Datagram) transport is used + and so the interface MTU has is equal to the IB L2 MTU minus the + IPoIB encapsulation header (4 bytes). For example, in a typical IB + fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044 bytes. + + In connected mode, the IB RC (Reliable Connected) transport is used. + Connected mode is to takes advantage of the connected nature of the + IB transport and allows an MTU up to the maximal IP packet size of + 64K, which reduces the number of IP packets needed for handling + large UDP datagrams, TCP segments, etc and increases the performance + for large messages. + + In connected mode, the interface's UD QP is still used for multicast + and communication with peers that don't support connected mode. In + this case, RX emulation of ICMP PMTU packets is used to cause the + networking stack to use the smaller UD MTU for these neighbours. + +Stateless offloads + + If the IB HW supports IPoIB stateless offloads, IPoIB advertises + TCP/IP checksum and/or Large Send (LSO) offloading capability to the + network stack. + + Large Receive (LRO) offloading is also implemented and may be turned + on/off using ethtool calls. Currently LRO is supported only for + checksum offload capable devices. + + Stateless offloads are supported only in datagram mode. + +Interrupt moderation + + If the underlying IB device supports CQ event moderation, one can + use ethtool to set interrupt mitigation parameters and thus reduce + the overhead incurred by handling interrupts. The main code path of + IPoIB doesn't use events for TX completion signaling so only RX + moderation is supported. + Debugging Information By compiling the IPoIB driver with CONFIG_INFINIBAND_IPOIB_DEBUG set @@ -55,3 +98,5 @@ References http://ietf.org/rfc/rfc4391.txt IP over InfiniBand (IPoIB) Architecture (RFC 4392) http://ietf.org/rfc/rfc4392.txt + IP over InfiniBand: Connected Mode (RFC 4755) + http://ietf.org/rfc/rfc4755.txt -- cgit v0.10.2 From 7a5efb62f6ae366cefac6be475434906c5061e15 Mon Sep 17 00:00:00 2001 From: Don Wood Date: Wed, 8 Apr 2009 14:21:02 -0700 Subject: RDMA/nes: Fix incorrect casts on 32-bit architectures The were some incorrect casts to unsigned long that caused 64-bit values to be truncated on 32-bit architectures and made the driver pass invalid adresses and lengths to the hardware. The problems were primarily seen with kernels with highmem configured but some could show up in non-highmem kernels, too. Signed-off-by: Don Wood Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h index 04b12ad..17621de 100644 --- a/drivers/infiniband/hw/nes/nes.h +++ b/drivers/infiniband/hw/nes/nes.h @@ -289,8 +289,8 @@ static inline __le32 get_crc_value(struct nes_v4_quad *nes_quad) static inline void set_wqe_64bit_value(__le32 *wqe_words, u32 index, u64 value) { - wqe_words[index] = cpu_to_le32((u32) ((unsigned long)value)); - wqe_words[index + 1] = cpu_to_le32((u32)(upper_32_bits((unsigned long)value))); + wqe_words[index] = cpu_to_le32((u32) value); + wqe_words[index + 1] = cpu_to_le32(upper_32_bits(value)); } static inline void diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 5242515..7c94247 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -2690,6 +2690,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) struct ib_mr *ibmr = NULL; struct ib_phys_buf ibphysbuf; struct nes_pd *nespd; + u64 tagged_offset; @@ -2755,10 +2756,11 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) ibphysbuf.addr = nesqp->ietf_frame_pbase; ibphysbuf.size = conn_param->private_data_len + sizeof(struct ietf_mpa_frame); + tagged_offset = (u64)(unsigned long)nesqp->ietf_frame; ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd, &ibphysbuf, 1, IB_ACCESS_LOCAL_WRITE, - (u64 *)&nesqp->ietf_frame); + &tagged_offset); if (!ibmr) { nes_debug(NES_DBG_CM, "Unable to register memory region" "for lSMM for cm_node = %p \n", @@ -2782,7 +2784,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) sizeof(struct ietf_mpa_frame)); set_wqe_64bit_value(wqe->wqe_words, NES_IWARP_SQ_WQE_FRAG0_LOW_IDX, - (u64)nesqp->ietf_frame); + (u64)(unsigned long)nesqp->ietf_frame); wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] = cpu_to_le32(conn_param->private_data_len + sizeof(struct ietf_mpa_frame)); -- cgit v0.10.2 From 79fc3d7410c861c8ced5b81a5c3759f6bbf891dc Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Wed, 8 Apr 2009 14:22:20 -0700 Subject: RDMA/nes: Fix error handling issues Fix issues found by static code analysis: (1) Check if cm_node was successfully created for loopback connection. (2) schedule_nes_timer() does not free up allocated memory after encountering an error. There is a WARN_ON() for this condition. (3) there is a cm_node->freed flag which is set but not used. Reported-by: Dan Carpenter Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 7c94247..a09caf5 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -426,6 +426,7 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb, if (type == NES_TIMER_TYPE_CLOSE) { new_send->timetosend += (HZ/10); if (cm_node->recv_entry) { + kfree(new_send); WARN_ON(1); return -EINVAL; } @@ -1262,7 +1263,6 @@ static int rem_ref_cm_node(struct nes_cm_core *cm_core, cm_node->nesqp = NULL; } - cm_node->freed = 1; kfree(cm_node); return 0; } @@ -1999,13 +1999,17 @@ static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core, if (loopbackremotelistener == NULL) { create_event(cm_node, NES_CM_EVENT_ABORTED); } else { - atomic_inc(&cm_loopbacks); loopback_cm_info = *cm_info; loopback_cm_info.loc_port = cm_info->rem_port; loopback_cm_info.rem_port = cm_info->loc_port; loopback_cm_info.cm_id = loopbackremotelistener->cm_id; loopbackremotenode = make_cm_node(cm_core, nesvnic, &loopback_cm_info, loopbackremotelistener); + if (!loopbackremotenode) { + rem_ref_cm_node(cm_node->cm_core, cm_node); + return NULL; + } + atomic_inc(&cm_loopbacks); loopbackremotenode->loopbackpartner = cm_node; loopbackremotenode->tcp_cntxt.rcv_wscale = NES_CM_DEFAULT_RCV_WND_SCALE; diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h index d5f7782..80bba18 100644 --- a/drivers/infiniband/hw/nes/nes_cm.h +++ b/drivers/infiniband/hw/nes/nes_cm.h @@ -298,7 +298,6 @@ struct nes_cm_node { struct nes_vnic *nesvnic; int apbvt_set; int accept_pend; - int freed; struct list_head timer_entry; struct list_head reset_entry; struct nes_qp *nesqp; -- cgit v0.10.2 From 5962c2c8036b4dcf10ec6c481be656ae4700b664 Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Wed, 8 Apr 2009 14:23:55 -0700 Subject: RDMA/nes: Fix nes_nic_cm_xmit() error handling We are getting crash or hung situation when we are running network cable pull tests during RDMA traffic. In schedule_nes_timer(), we return an error if nes_nic_cm_xmit() returns failure. This is changed to success as skb is being put on the timer routines to be processed later. In send_syn() case, we are indicating connect failure once from nes_connect() and the other when the rexmit retries expires. The other issue is skb->users which we are incrementing before calling nes_nic_cm_xmit() which calls dev_queue_xmit() but in case of failure we are decrementing the skb->users at the same time putting the skb on the rexmit path. Even if dev_queue_xmit() fails, the skb->users is decremented already. We are removing the decrement of skb->users in case of failure from both schedule_nes_timer() as well as from nes_cm_timer_tick(). There is also extra check in nes_cm_timer_tick() for rexmit failure which does a break from the loop is removed. This causes problem as the other nodes have their cm_node->ref_count incremented and are not processed. Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index a09caf5..dbd9a75 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -446,8 +446,8 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb, if (ret != NETDEV_TX_OK) { nes_debug(NES_DBG_CM, "Error sending packet %p " "(jiffies = %lu)\n", new_send, jiffies); - atomic_dec(&new_send->skb->users); new_send->timetosend = jiffies; + ret = NETDEV_TX_OK; } else { cm_packets_sent++; if (!send_retrans) { @@ -631,7 +631,6 @@ static void nes_cm_timer_tick(unsigned long pass) nes_debug(NES_DBG_CM, "rexmit failed for " "node=%p\n", cm_node); cm_packets_bounced++; - atomic_dec(&send_entry->skb->users); send_entry->retrycount--; nexttimeout = jiffies + NES_SHORT_TIME; settimer = 1; @@ -667,11 +666,6 @@ static void nes_cm_timer_tick(unsigned long pass) spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags); rem_ref_cm_node(cm_node->cm_core, cm_node); - if (ret != NETDEV_TX_OK) { - nes_debug(NES_DBG_CM, "rexmit failed for cm_node=%p\n", - cm_node); - break; - } } if (settimer) { -- cgit v0.10.2 From b96229b50d71c548302053c244b89572a5264c0b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 17 Mar 2009 13:30:55 -0700 Subject: xen/mmu: some early pagetable cleanups 1. make sure early-allocated ptes are pinned, so they can be later unpinned 2. don't pin pmd+pud, just make them RO 3. scatter some __inits around Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 6e58acd..4db24e1 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1019,7 +1019,7 @@ static __init int xen_mark_pinned(struct mm_struct *mm, struct page *page, return 0; } -void __init xen_mark_init_mm_pinned(void) +static void __init xen_mark_init_mm_pinned(void) { xen_pgd_walk(&init_mm, xen_mark_pinned, FIXADDR_TOP); } @@ -1470,6 +1470,15 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) } #endif +static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn) +{ + struct mmuext_op op; + op.cmd = cmd; + op.arg1.mfn = pfn_to_mfn(pfn); + if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF)) + BUG(); +} + /* Early in boot, while setting up the initial pagetable, assume everything is pinned. */ static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn) @@ -1478,22 +1487,29 @@ static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn) BUG_ON(mem_map); /* should only be used early */ #endif make_lowmem_page_readonly(__va(PFN_PHYS(pfn))); + pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn); +} + +/* Used for pmd and pud */ +static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn) +{ +#ifdef CONFIG_FLATMEM + BUG_ON(mem_map); /* should only be used early */ +#endif + make_lowmem_page_readonly(__va(PFN_PHYS(pfn))); } /* Early release_pte assumes that all pts are pinned, since there's only init_mm and anything attached to that is pinned. */ -static void xen_release_pte_init(unsigned long pfn) +static __init void xen_release_pte_init(unsigned long pfn) { + pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn); make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); } -static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn) +static __init void xen_release_pmd_init(unsigned long pfn) { - struct mmuext_op op; - op.cmd = cmd; - op.arg1.mfn = pfn_to_mfn(pfn); - if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF)) - BUG(); + make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); } /* This needs to make sure the new pte page is pinned iff its being @@ -1874,9 +1890,9 @@ const struct pv_mmu_ops xen_mmu_ops __initdata = { .alloc_pte = xen_alloc_pte_init, .release_pte = xen_release_pte_init, - .alloc_pmd = xen_alloc_pte_init, + .alloc_pmd = xen_alloc_pmd_init, .alloc_pmd_clone = paravirt_nop, - .release_pmd = xen_release_pte_init, + .release_pmd = xen_release_pmd_init, #ifdef CONFIG_HIGHPTE .kmap_atomic_pte = xen_kmap_atomic_pte, @@ -1914,8 +1930,8 @@ const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pud = PV_CALLEE_SAVE(xen_make_pud), .set_pgd = xen_set_pgd_hyper, - .alloc_pud = xen_alloc_pte_init, - .release_pud = xen_release_pte_init, + .alloc_pud = xen_alloc_pmd_init, + .release_pud = xen_release_pmd_init, #endif /* PAGETABLE_LEVELS == 4 */ .activate_mm = xen_activate_mm, diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 2f5ef26..2013946 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -57,8 +57,6 @@ irqreturn_t xen_debug_interrupt(int irq, void *dev_id); bool xen_vcpu_stolen(int vcpu); -void xen_mark_init_mm_pinned(void); - void xen_setup_vcpu_info_placement(void); #ifdef CONFIG_SMP -- cgit v0.10.2 From e3f8a74e3a884b91a4390c66ed8175ef74db7067 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 4 Mar 2009 17:36:57 -0800 Subject: xen/mmu: weaken flush_tlb_other test Impact: fixes crashing bug There's no particular problem with getting an empty cpu mask, so just shortcut-return if we get one. Avoids crash reported by Christophe Saout Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 4db24e1..7ef880c 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1302,8 +1302,8 @@ static void xen_flush_tlb_others(const struct cpumask *cpus, } *args; struct multicall_space mcs; - BUG_ON(cpumask_empty(cpus)); - BUG_ON(!mm); + if (cpumask_empty(cpus)) + return; /* nothing to do */ mcs = xen_mc_entry(sizeof(*args)); args = mcs.args; -- cgit v0.10.2 From 9a5a2cac9f99c98d9d15cec17b1904f29d0e8009 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 25 Mar 2009 17:46:42 +0000 Subject: xen: resume interrupts before system devices. Impact: bugfix Xen domain restore Otherwise the first timer interrupt after resume is missed and we never get another. Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 0d61db1..4b5b848 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -62,14 +62,15 @@ static int xen_suspend(void *data) gnttab_resume(); xen_mm_unpin_all(); - sysdev_resume(); - if (!*cancelled) { xen_irq_resume(); xen_console_resume(); xen_timer_resume(); } + sysdev_resume(); + device_power_up(PMSG_RESUME); + return 0; } -- cgit v0.10.2 From bc6081ff98eec627919e0c68415e46a78fe51dc4 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 27 Mar 2009 11:29:02 -0700 Subject: xen: set _PAGE_NX in __supported_pte_mask before pagetable construction Some 64-bit machines don't support the NX flag in ptes. Check for NX before constructing the kernel pagetables. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 69de191..f7d0fd7 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -914,7 +915,6 @@ static const struct machine_ops __initdata xen_machine_ops = { .emergency_restart = xen_emergency_restart, }; - /* First C function to be called on Xen boot */ asmlinkage void __init xen_start_kernel(void) { @@ -982,6 +982,11 @@ asmlinkage void __init xen_start_kernel(void) if (!xen_initial_domain()) __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); +#ifdef CONFIG_X86_64 + /* Work out if we support NX */ + check_efer(); +#endif + /* Don't do the full vcpu_info placement stuff until we have a possible map and a non-dummy shared_info. */ per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; -- cgit v0.10.2 From 2b2a733447b2bce5fef053df38412e4c0634ec22 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sun, 29 Mar 2009 22:57:15 -0700 Subject: xen: clean up gate trap/interrupt constants Use GATE_INTERRUPT/TRAP rather than 0xe/f. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f7d0fd7..f09e8c3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -428,7 +428,7 @@ static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum, static int cvt_gate_to_trap(int vector, const gate_desc *val, struct trap_info *info) { - if (val->type != 0xf && val->type != 0xe) + if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT) return 0; info->vector = vector; @@ -436,8 +436,8 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val, info->cs = gate_segment(*val); info->flags = val->dpl; /* interrupt gates clear IF */ - if (val->type == 0xe) - info->flags |= 4; + if (val->type == GATE_INTERRUPT) + info->flags |= 1 << 2; return 1; } -- cgit v0.10.2 From d745562cc40bff60f0597004d8128fa0225cc267 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 2 Apr 2009 13:24:28 +0100 Subject: xen: honour VCPU availability on boot If a VM is booted with offline VCPUs then unplug them during boot. Determining the availability of a VCPU requires access to XenStore which is not available at the point smp_prepare_cpus() is called, therefore we bring up all VCPUS initially and unplug the offline ones as soon as XenStore becomes available. Signed-off-by: Ian Campbell diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c index 5f54c01..bdfd584 100644 --- a/drivers/xen/cpu_hotplug.c +++ b/drivers/xen/cpu_hotplug.c @@ -21,29 +21,41 @@ static void disable_hotplug_cpu(int cpu) set_cpu_present(cpu, false); } -static void vcpu_hotplug(unsigned int cpu) +static int vcpu_online(unsigned int cpu) { int err; char dir[32], state[32]; - if (!cpu_possible(cpu)) - return; - sprintf(dir, "cpu/%u", cpu); err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state); if (err != 1) { printk(KERN_ERR "XENBUS: Unable to read cpu state\n"); - return; + return err; } - if (strcmp(state, "online") == 0) { + if (strcmp(state, "online") == 0) + return 1; + else if (strcmp(state, "offline") == 0) + return 0; + + printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n", state, cpu); + return -EINVAL; +} +static void vcpu_hotplug(unsigned int cpu) +{ + if (!cpu_possible(cpu)) + return; + + switch (vcpu_online(cpu)) { + case 1: enable_hotplug_cpu(cpu); - } else if (strcmp(state, "offline") == 0) { + break; + case 0: (void)cpu_down(cpu); disable_hotplug_cpu(cpu); - } else { - printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n", - state, cpu); + break; + default: + break; } } @@ -64,12 +76,20 @@ static void handle_vcpu_hotplug_event(struct xenbus_watch *watch, static int setup_cpu_watcher(struct notifier_block *notifier, unsigned long event, void *data) { + int cpu; static struct xenbus_watch cpu_watch = { .node = "cpu", .callback = handle_vcpu_hotplug_event}; (void)register_xenbus_watch(&cpu_watch); + for_each_possible_cpu(cpu) { + if (vcpu_online(cpu) == 0) { + (void)cpu_down(cpu); + cpu_clear(cpu, cpu_present_map); + } + } + return NOTIFY_DONE; } -- cgit v0.10.2 From 1b9493248cf5e9f1ecc045488100cbf3ccd91be1 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Wed, 8 Apr 2009 14:27:09 -0700 Subject: RDMA/nes: Fix SFP+ PHY initialization SFP+ PHY initialization has very long delays, incorrect settings for direct attach copper cables, and inconsistent link detection. Adjust delays to the minimum required by the PHY. Worst case is now less than 4 seconds. Add new register settings for direct attach cables. Change link detection logic to use two new registers for more consistent link state detection. Reorganize code to shorten line length. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 52e7340..466c730 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -757,6 +757,10 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count, ((port_count > 2) && (nesadapter->phy_type[0] == NES_PHY_TYPE_PUMA_1G))) { /* init serdes 1 */ + if (nesadapter->phy_type[0] == NES_PHY_TYPE_ARGUS) { + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP0, 0x00000000); + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x00000000); + } nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF); if (nesadapter->phy_type[0] == NES_PHY_TYPE_PUMA_1G) { serdes_common_control = nes_read_indexed(nesdev, @@ -1259,203 +1263,155 @@ int nes_init_phy(struct nes_device *nesdev) { struct nes_adapter *nesadapter = nesdev->nesadapter; u32 counter = 0; - u32 sds_common_control0; + u32 sds; u32 mac_index = nesdev->mac_index; u32 tx_config = 0; u16 phy_data; u32 temp_phy_data = 0; u32 temp_phy_data2 = 0; - u32 i = 0; + u8 phy_type = nesadapter->phy_type[mac_index]; + u8 phy_index = nesadapter->phy_index[mac_index]; if ((nesadapter->OneG_Mode) && - (nesadapter->phy_type[mac_index] != NES_PHY_TYPE_PUMA_1G)) { + (phy_type != NES_PHY_TYPE_PUMA_1G)) { nes_debug(NES_DBG_PHY, "1G PHY, mac_index = %d.\n", mac_index); - if (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_1G) { - printk(PFX "%s: Programming mdc config for 1G\n", __func__); + if (phy_type == NES_PHY_TYPE_1G) { tx_config = nes_read_indexed(nesdev, NES_IDX_MAC_TX_CONFIG); tx_config &= 0xFFFFFFE3; tx_config |= 0x04; nes_write_indexed(nesdev, NES_IDX_MAC_TX_CONFIG, tx_config); } - nes_read_1G_phy_reg(nesdev, 1, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 1 phy address %u = 0x%X.\n", - nesadapter->phy_index[mac_index], phy_data); - nes_write_1G_phy_reg(nesdev, 23, nesadapter->phy_index[mac_index], 0xb000); + nes_read_1G_phy_reg(nesdev, 1, phy_index, &phy_data); + nes_write_1G_phy_reg(nesdev, 23, phy_index, 0xb000); /* Reset the PHY */ - nes_write_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], 0x8000); + nes_write_1G_phy_reg(nesdev, 0, phy_index, 0x8000); udelay(100); counter = 0; do { - nes_read_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0 = 0x%X.\n", phy_data); - if (counter++ > 100) break; + nes_read_1G_phy_reg(nesdev, 0, phy_index, &phy_data); + if (counter++ > 100) + break; } while (phy_data & 0x8000); /* Setting no phy loopback */ phy_data &= 0xbfff; phy_data |= 0x1140; - nes_write_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], phy_data); - nes_read_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0 = 0x%X.\n", phy_data); - - nes_read_1G_phy_reg(nesdev, 0x17, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0x17 = 0x%X.\n", phy_data); - - nes_read_1G_phy_reg(nesdev, 0x1e, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0x1e = 0x%X.\n", phy_data); + nes_write_1G_phy_reg(nesdev, 0, phy_index, phy_data); + nes_read_1G_phy_reg(nesdev, 0, phy_index, &phy_data); + nes_read_1G_phy_reg(nesdev, 0x17, phy_index, &phy_data); + nes_read_1G_phy_reg(nesdev, 0x1e, phy_index, &phy_data); /* Setting the interrupt mask */ - nes_read_1G_phy_reg(nesdev, 0x19, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0x19 = 0x%X.\n", phy_data); - nes_write_1G_phy_reg(nesdev, 0x19, nesadapter->phy_index[mac_index], 0xffee); - - nes_read_1G_phy_reg(nesdev, 0x19, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0x19 = 0x%X.\n", phy_data); + nes_read_1G_phy_reg(nesdev, 0x19, phy_index, &phy_data); + nes_write_1G_phy_reg(nesdev, 0x19, phy_index, 0xffee); + nes_read_1G_phy_reg(nesdev, 0x19, phy_index, &phy_data); /* turning on flow control */ - nes_read_1G_phy_reg(nesdev, 4, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0x4 = 0x%X.\n", phy_data); - nes_write_1G_phy_reg(nesdev, 4, nesadapter->phy_index[mac_index], - (phy_data & ~(0x03E0)) | 0xc00); - /* nes_write_1G_phy_reg(nesdev, 4, nesadapter->phy_index[mac_index], - phy_data | 0xc00); */ - nes_read_1G_phy_reg(nesdev, 4, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0x4 = 0x%X.\n", phy_data); - - nes_read_1G_phy_reg(nesdev, 9, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0x9 = 0x%X.\n", phy_data); - /* Clear Half duplex */ - nes_write_1G_phy_reg(nesdev, 9, nesadapter->phy_index[mac_index], - phy_data & ~(0x0100)); - nes_read_1G_phy_reg(nesdev, 9, nesadapter->phy_index[mac_index], &phy_data); - nes_debug(NES_DBG_PHY, "Phy data from register 0x9 = 0x%X.\n", phy_data); + nes_read_1G_phy_reg(nesdev, 4, phy_index, &phy_data); + nes_write_1G_phy_reg(nesdev, 4, phy_index, (phy_data & ~(0x03E0)) | 0xc00); + nes_read_1G_phy_reg(nesdev, 4, phy_index, &phy_data); - nes_read_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], &phy_data); - nes_write_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], phy_data | 0x0300); - } else { - if ((nesadapter->phy_type[mac_index] == NES_PHY_TYPE_IRIS) || - (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_ARGUS)) { - /* setup 10G MDIO operation */ - tx_config = nes_read_indexed(nesdev, NES_IDX_MAC_TX_CONFIG); - tx_config &= 0xFFFFFFE3; - tx_config |= 0x15; - nes_write_indexed(nesdev, NES_IDX_MAC_TX_CONFIG, tx_config); - } - if ((nesadapter->phy_type[mac_index] == NES_PHY_TYPE_ARGUS)) { - nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7ee); + /* Clear Half duplex */ + nes_read_1G_phy_reg(nesdev, 9, phy_index, &phy_data); + nes_write_1G_phy_reg(nesdev, 9, phy_index, phy_data & ~(0x0100)); + nes_read_1G_phy_reg(nesdev, 9, phy_index, &phy_data); - temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); - mdelay(10); - nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7ee); - temp_phy_data2 = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + nes_read_1G_phy_reg(nesdev, 0, phy_index, &phy_data); + nes_write_1G_phy_reg(nesdev, 0, phy_index, phy_data | 0x0300); - /* - * if firmware is already running (like from a - * driver un-load/load, don't do anything. - */ - if (temp_phy_data == temp_phy_data2) { - /* configure QT2505 AMCC PHY */ - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0x0000, 0x8000); - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc300, 0x0000); - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc302, 0x0044); - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc318, 0x0052); - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc319, 0x0008); - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc31a, 0x0098); - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0x0026, 0x0E00); - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0x0027, 0x0001); - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0x0028, 0xA528); + return 0; + } - /* - * remove micro from reset; chip boots from ROM, - * uploads EEPROM f/w image, uC executes f/w - */ - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc300, 0x0002); + if ((phy_type == NES_PHY_TYPE_IRIS) || + (phy_type == NES_PHY_TYPE_ARGUS)) { + /* setup 10G MDIO operation */ + tx_config = nes_read_indexed(nesdev, NES_IDX_MAC_TX_CONFIG); + tx_config &= 0xFFFFFFE3; + tx_config |= 0x15; + nes_write_indexed(nesdev, NES_IDX_MAC_TX_CONFIG, tx_config); + } + if ((phy_type == NES_PHY_TYPE_ARGUS)) { + /* Check firmware heartbeat */ + nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee); + temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + udelay(1500); + nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee); + temp_phy_data2 = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); - /* - * wait for heart beat to start to - * know loading is done - */ - counter = 0; - do { - nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7ee); - temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); - if (counter++ > 1000) { - nes_debug(NES_DBG_PHY, "AMCC PHY- breaking from heartbeat check \n"); - break; - } - mdelay(100); - nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7ee); - temp_phy_data2 = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); - } while ((temp_phy_data2 == temp_phy_data)); + if (temp_phy_data != temp_phy_data2) + return 0; - /* - * wait for tracking to start to know - * f/w is good to go - */ - counter = 0; - do { - nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7fd); - temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); - if (counter++ > 1000) { - nes_debug(NES_DBG_PHY, "AMCC PHY- breaking from status check \n"); - break; - } - mdelay(1000); - /* - * nes_debug(NES_DBG_PHY, "AMCC PHY- phy_status not ready yet = 0x%02X\n", - * temp_phy_data); - */ - } while (((temp_phy_data & 0xff) != 0x50) && ((temp_phy_data & 0xff) != 0x70)); - - /* set LOS Control invert RXLOSB_I_PADINV */ - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xd003, 0x0000); - /* set LOS Control to mask of RXLOSB_I */ - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc314, 0x0042); - /* set LED1 to input mode (LED1 and LED2 share same LED) */ - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xd006, 0x0007); - /* set LED2 to RX link_status and activity */ - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xd007, 0x000A); - /* set LED3 to RX link_status */ - nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xd008, 0x0009); + /* no heartbeat, configure the PHY */ + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0x0000, 0x8000); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc300, 0x0000); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x000C); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc316, 0x000A); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc318, 0x0052); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0008); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc31a, 0x0098); + nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0026, 0x0E00); + nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001); - /* - * reset the res-calibration on t2 - * serdes; ensures it is stable after - * the amcc phy is stable - */ + /* setup LEDs */ + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd006, 0x0007); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd007, 0x000A); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd008, 0x0009); - sds_common_control0 = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0); - sds_common_control0 |= 0x1; - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, sds_common_control0); + nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0028, 0xA528); - /* release the res-calibration reset */ - sds_common_control0 &= 0xfffffffe; - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, sds_common_control0); + /* Bring PHY out of reset */ + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc300, 0x0002); - i = 0; - while (((nes_read32(nesdev->regs + NES_SOFTWARE_RESET) & 0x00000040) != 0x00000040) - && (i++ < 5000)) { - /* mdelay(1); */ - } + /* Check for heartbeat */ + counter = 0; + mdelay(690); + nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee); + temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + do { + if (counter++ > 150) { + nes_debug(NES_DBG_PHY, "No PHY heartbeat\n"); + break; + } + mdelay(1); + nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee); + temp_phy_data2 = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + } while ((temp_phy_data2 == temp_phy_data)); - /* - * wait for link train done before moving on, - * or will get an interupt storm - */ - counter = 0; - do { - temp_phy_data = nes_read_indexed(nesdev, NES_IDX_PHY_PCS_CONTROL_STATUS0 + - (0x200 * (nesdev->mac_index & 1))); - if (counter++ > 1000) { - nes_debug(NES_DBG_PHY, "AMCC PHY- breaking from link train wait \n"); - break; - } - mdelay(1); - } while (((temp_phy_data & 0x0f1f0000) != 0x0f0f0000)); + /* wait for tracking */ + counter = 0; + do { + nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7fd); + temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + if (counter++ > 300) { + nes_debug(NES_DBG_PHY, "PHY did not track\n"); + break; } - } + mdelay(10); + } while (((temp_phy_data & 0xff) != 0x50) && ((temp_phy_data & 0xff) != 0x70)); + + /* setup signal integrity */ + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd003, 0x0000); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xF00D, 0x00FE); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xF00E, 0x0032); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xF00F, 0x0002); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc314, 0x0063); + + /* reset serdes */ + sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0 + + mac_index * 0x200); + sds |= 0x1; + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0 + + mac_index * 0x200, sds); + sds &= 0xfffffffe; + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0 + + mac_index * 0x200, sds); + + counter = 0; + while (((nes_read32(nesdev->regs + NES_SOFTWARE_RESET) & 0x00000040) != 0x00000040) + && (counter++ < 5000)) + ; } return 0; } @@ -2483,19 +2439,18 @@ static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number) nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 0x9004); nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 0x9005); /* check link status */ - nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 1); + nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 0x9003); temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); - u32temp = 100; - do { - nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 1); - phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); - if ((phy_data == temp_phy_data) || (!(--u32temp))) - break; - temp_phy_data = phy_data; - } while (1); + nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 3, 0x0021); + nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 3, 0x0021); + phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + + phy_data = (!temp_phy_data && (phy_data == 0x8000)) ? 0x4 : 0x0; + nes_debug(NES_DBG_PHY, "%s: Phy data = 0x%04X, link was %s.\n", - __func__, phy_data, nesadapter->mac_link_down ? "DOWN" : "UP"); + __func__, phy_data, nesadapter->mac_link_down[mac_index] ? "DOWN" : "UP"); break; case NES_PHY_TYPE_PUMA_1G: -- cgit v0.10.2 From a4849fc157cdbe4fb68cfe37e7222697f003deb5 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Wed, 8 Apr 2009 14:27:18 -0700 Subject: RDMA/nes: Add wide_ppm_offset parm for switch compatibility We have observed unstable link with a new BNT switch. Add wide_ppm_offset parameter to allow the user to control the clock ppm offset on the CX4 interface for better compatibility. Default is 100ppm, setting it to 1 will increase it to 300ppm. Change default SerDes1 reference clock to external source. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 466c730..f797064 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -46,6 +46,10 @@ static unsigned int nes_lro_max_aggr = NES_LRO_MAX_AGGR; module_param(nes_lro_max_aggr, uint, 0444); MODULE_PARM_DESC(nes_lro_max_aggr, "NIC LRO max packet aggregation"); +static int wide_ppm_offset; +module_param(wide_ppm_offset, int, 0644); +MODULE_PARM_DESC(wide_ppm_offset, "Increase CX4 interface clock ppm offset, 0=100ppm (default), 1=300ppm"); + static u32 crit_err_count; u32 int_mod_timer_init; u32 int_mod_cq_depth_256; @@ -546,8 +550,11 @@ struct nes_adapter *nes_init_adapter(struct nes_device *nesdev, u8 hw_rev) { msleep(1); } if (int_cnt > 1) { + u32 sds; spin_lock_irqsave(&nesadapter->phy_lock, flags); - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, 0x0000F088); + sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1); + sds |= 0x00000040; + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds); mh_detected++; reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET); reset_value |= 0x0000003d; @@ -736,43 +743,48 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count, { int i; u32 u32temp; - u32 serdes_common_control; + u32 sds; if (hw_rev != NE020_REV) { /* init serdes 0 */ + if (wide_ppm_offset && (nesadapter->phy_type[0] == NES_PHY_TYPE_CX4)) + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL0, 0x000FFFAA); + else + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL0, 0x000000FF); - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL0, 0x000000FF); if (nesadapter->phy_type[0] == NES_PHY_TYPE_PUMA_1G) { - serdes_common_control = nes_read_indexed(nesdev, - NES_IDX_ETH_SERDES_COMMON_CONTROL0); - serdes_common_control |= 0x000000100; - nes_write_indexed(nesdev, - NES_IDX_ETH_SERDES_COMMON_CONTROL0, - serdes_common_control); - } else if (!OneG_Mode) { - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE0, 0x11110000); + sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0); + sds |= 0x00000100; + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, sds); } - if (((port_count > 1) && - (nesadapter->phy_type[0] != NES_PHY_TYPE_PUMA_1G)) || - ((port_count > 2) && - (nesadapter->phy_type[0] == NES_PHY_TYPE_PUMA_1G))) { - /* init serdes 1 */ - if (nesadapter->phy_type[0] == NES_PHY_TYPE_ARGUS) { - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP0, 0x00000000); - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x00000000); - } - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF); - if (nesadapter->phy_type[0] == NES_PHY_TYPE_PUMA_1G) { - serdes_common_control = nes_read_indexed(nesdev, - NES_IDX_ETH_SERDES_COMMON_CONTROL1); - serdes_common_control |= 0x000000100; - nes_write_indexed(nesdev, - NES_IDX_ETH_SERDES_COMMON_CONTROL1, - serdes_common_control); - } else if (!OneG_Mode) { - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE1, 0x11110000); - } + if (!OneG_Mode) + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE0, 0x11110000); + + if (port_count < 2) + return 0; + + /* init serdes 1 */ + switch (nesadapter->phy_type[1]) { + case NES_PHY_TYPE_ARGUS: + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP0, 0x00000000); + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x00000000); + break; + case NES_PHY_TYPE_CX4: + sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1); + sds &= 0xFFFFFFBF; + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds); + if (wide_ppm_offset) + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000FFFAA); + else + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF); + break; + case NES_PHY_TYPE_PUMA_1G: + sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1); + sds |= 0x000000100; + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds); } + if (!OneG_Mode) + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE1, 0x11110000); } else { /* init serdes 0 */ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, 0x00000008); @@ -2315,6 +2327,7 @@ static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number) u16 temp_phy_data; u32 pcs_val = 0x0f0f0000; u32 pcs_mask = 0x0f1f0000; + u32 cdr_ctrl; spin_lock_irqsave(&nesadapter->phy_lock, flags); if (nesadapter->mac_sw_state[mac_number] != NES_MAC_SW_IDLE) { @@ -2466,6 +2479,17 @@ static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number) } if (phy_data & 0x0004) { + if (wide_ppm_offset && + (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_CX4) && + (nesadapter->hw_rev != NE020_REV)) { + cdr_ctrl = nes_read_indexed(nesdev, + NES_IDX_ETH_SERDES_CDR_CONTROL0 + + mac_index * 0x200); + nes_write_indexed(nesdev, + NES_IDX_ETH_SERDES_CDR_CONTROL0 + + mac_index * 0x200, + cdr_ctrl | 0x000F0000); + } nesadapter->mac_link_down[mac_index] = 0; list_for_each_entry(nesvnic, &nesadapter->nesvnic_list[mac_index], list) { nes_debug(NES_DBG_PHY, "The Link is UP!!. linkup was %d\n", @@ -2480,6 +2504,17 @@ static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number) } } } else { + if (wide_ppm_offset && + (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_CX4) && + (nesadapter->hw_rev != NE020_REV)) { + cdr_ctrl = nes_read_indexed(nesdev, + NES_IDX_ETH_SERDES_CDR_CONTROL0 + + mac_index * 0x200); + nes_write_indexed(nesdev, + NES_IDX_ETH_SERDES_CDR_CONTROL0 + + mac_index * 0x200, + cdr_ctrl & 0xFFF0FFFF); + } nesadapter->mac_link_down[mac_index] = 1; list_for_each_entry(nesvnic, &nesadapter->nesvnic_list[mac_index], list) { nes_debug(NES_DBG_PHY, "The Link is Down!!. linkup was %d\n", diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index f41a871..13bc26a 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -35,6 +35,7 @@ #include +#define NES_PHY_TYPE_CX4 1 #define NES_PHY_TYPE_1G 2 #define NES_PHY_TYPE_IRIS 3 #define NES_PHY_TYPE_ARGUS 4 -- cgit v0.10.2 From 4303565df4eb425851ddd22136fec69bdfeede61 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Wed, 8 Apr 2009 14:27:56 -0700 Subject: RDMA/nes: Add support for new SFP+ PHY Add new register settings for new SFP+ PHY/firmware. Add new PHY to to nes_netdev_get/set_settings. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index f797064..d6fc9ae 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -765,7 +765,8 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count, /* init serdes 1 */ switch (nesadapter->phy_type[1]) { - case NES_PHY_TYPE_ARGUS: + case NES_PHY_TYPE_ARGUS: + case NES_PHY_TYPE_SFP_D: nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP0, 0x00000000); nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x00000000); break; @@ -1337,14 +1338,16 @@ int nes_init_phy(struct nes_device *nesdev) } if ((phy_type == NES_PHY_TYPE_IRIS) || - (phy_type == NES_PHY_TYPE_ARGUS)) { + (phy_type == NES_PHY_TYPE_ARGUS) || + (phy_type == NES_PHY_TYPE_SFP_D)) { /* setup 10G MDIO operation */ tx_config = nes_read_indexed(nesdev, NES_IDX_MAC_TX_CONFIG); tx_config &= 0xFFFFFFE3; tx_config |= 0x15; nes_write_indexed(nesdev, NES_IDX_MAC_TX_CONFIG, tx_config); } - if ((phy_type == NES_PHY_TYPE_ARGUS)) { + if ((phy_type == NES_PHY_TYPE_ARGUS) || + (phy_type == NES_PHY_TYPE_SFP_D)) { /* Check firmware heartbeat */ nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee); temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); @@ -1358,10 +1361,15 @@ int nes_init_phy(struct nes_device *nesdev) /* no heartbeat, configure the PHY */ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0x0000, 0x8000); nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc300, 0x0000); - nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x000C); nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc316, 0x000A); nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc318, 0x0052); - nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0008); + if (phy_type == NES_PHY_TYPE_ARGUS) { + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x000C); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0008); + } else { + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x0004); + nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0038); + } nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc31a, 0x0098); nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0026, 0x0E00); nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001); @@ -2442,6 +2450,7 @@ static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number) break; case NES_PHY_TYPE_ARGUS: + case NES_PHY_TYPE_SFP_D: /* clear the alarms */ nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 4, 0x0008); nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 4, 0xc001); diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 13bc26a..c3654c6 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -42,6 +42,7 @@ #define NES_PHY_TYPE_PUMA_1G 5 #define NES_PHY_TYPE_PUMA_10G 6 #define NES_PHY_TYPE_GLADIUS 7 +#define NES_PHY_TYPE_SFP_D 8 #define NES_MULTICAST_PF_MAX 8 diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c index ecb1f6f..c6e6611 100644 --- a/drivers/infiniband/hw/nes/nes_nic.c +++ b/drivers/infiniband/hw/nes/nes_nic.c @@ -1426,49 +1426,55 @@ static int nes_netdev_get_settings(struct net_device *netdev, struct ethtool_cmd struct nes_vnic *nesvnic = netdev_priv(netdev); struct nes_device *nesdev = nesvnic->nesdev; struct nes_adapter *nesadapter = nesdev->nesadapter; + u32 mac_index = nesdev->mac_index; + u8 phy_type = nesadapter->phy_type[mac_index]; + u8 phy_index = nesadapter->phy_index[mac_index]; u16 phy_data; et_cmd->duplex = DUPLEX_FULL; et_cmd->port = PORT_MII; + et_cmd->maxtxpkt = 511; + et_cmd->maxrxpkt = 511; if (nesadapter->OneG_Mode) { et_cmd->speed = SPEED_1000; - if (nesadapter->phy_type[nesdev->mac_index] == NES_PHY_TYPE_PUMA_1G) { + if (phy_type == NES_PHY_TYPE_PUMA_1G) { et_cmd->supported = SUPPORTED_1000baseT_Full; et_cmd->advertising = ADVERTISED_1000baseT_Full; et_cmd->autoneg = AUTONEG_DISABLE; et_cmd->transceiver = XCVR_INTERNAL; - et_cmd->phy_address = nesdev->mac_index; + et_cmd->phy_address = mac_index; } else { - et_cmd->supported = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg; - et_cmd->advertising = ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg; - nes_read_1G_phy_reg(nesdev, 0, nesadapter->phy_index[nesdev->mac_index], &phy_data); + et_cmd->supported = SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg; + et_cmd->advertising = ADVERTISED_1000baseT_Full + | ADVERTISED_Autoneg; + nes_read_1G_phy_reg(nesdev, 0, phy_index, &phy_data); if (phy_data & 0x1000) et_cmd->autoneg = AUTONEG_ENABLE; else et_cmd->autoneg = AUTONEG_DISABLE; et_cmd->transceiver = XCVR_EXTERNAL; - et_cmd->phy_address = nesadapter->phy_index[nesdev->mac_index]; + et_cmd->phy_address = phy_index; } + return 0; + } + if ((phy_type == NES_PHY_TYPE_IRIS) || + (phy_type == NES_PHY_TYPE_ARGUS) || + (phy_type == NES_PHY_TYPE_SFP_D)) { + et_cmd->transceiver = XCVR_EXTERNAL; + et_cmd->port = PORT_FIBRE; + et_cmd->supported = SUPPORTED_FIBRE; + et_cmd->advertising = ADVERTISED_FIBRE; + et_cmd->phy_address = phy_index; } else { - if ((nesadapter->phy_type[nesdev->mac_index] == NES_PHY_TYPE_IRIS) || - (nesadapter->phy_type[nesdev->mac_index] == NES_PHY_TYPE_ARGUS)) { - et_cmd->transceiver = XCVR_EXTERNAL; - et_cmd->port = PORT_FIBRE; - et_cmd->supported = SUPPORTED_FIBRE; - et_cmd->advertising = ADVERTISED_FIBRE; - et_cmd->phy_address = nesadapter->phy_index[nesdev->mac_index]; - } else { - et_cmd->transceiver = XCVR_INTERNAL; - et_cmd->supported = SUPPORTED_10000baseT_Full; - et_cmd->advertising = ADVERTISED_10000baseT_Full; - et_cmd->phy_address = nesdev->mac_index; - } - et_cmd->speed = SPEED_10000; - et_cmd->autoneg = AUTONEG_DISABLE; + et_cmd->transceiver = XCVR_INTERNAL; + et_cmd->supported = SUPPORTED_10000baseT_Full; + et_cmd->advertising = ADVERTISED_10000baseT_Full; + et_cmd->phy_address = mac_index; } - et_cmd->maxtxpkt = 511; - et_cmd->maxrxpkt = 511; + et_cmd->speed = SPEED_10000; + et_cmd->autoneg = AUTONEG_DISABLE; return 0; } -- cgit v0.10.2 From 7831d56b0a3544cbb6f82f76c34ca95e24d5b676 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 8 Apr 2009 20:13:16 +0100 Subject: tty: MAX3100 Thou shalt remember to use 'git add' or errors shall be visited on your downloads and there shall be wrath from on list and much gnashing of teeth. Thou shalt remember to use git status or there shall be catcalls and much embarrasment shall come to pass. Signed-off-by: Alan "I'm hiding" Cox Signed-off-by: Linus Torvalds diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c new file mode 100644 index 0000000..9fd33e5 --- /dev/null +++ b/drivers/serial/max3100.c @@ -0,0 +1,927 @@ +/* + * + * Copyright (C) 2008 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have + * to use polling for flow control. TX empty IRQ is unusable, since + * writing conf clears FIFO buffer and we cannot have this interrupt + * always asking us for attention. + * + * Example platform data: + + static struct plat_max3100 max3100_plat_data = { + .loopback = 0, + .crystal = 0, + .poll_time = 100, + }; + + static struct spi_board_info spi_board_info[] = { + { + .modalias = "max3100", + .platform_data = &max3100_plat_data, + .irq = IRQ_EINT12, + .max_speed_hz = 5*1000*1000, + .chip_select = 0, + }, + }; + + * The initial minor number is 209 in the low-density serial port: + * mknod /dev/ttyMAX0 c 204 209 + */ + +#define MAX3100_MAJOR 204 +#define MAX3100_MINOR 209 +/* 4 MAX3100s should be enough for everyone */ +#define MAX_MAX3100 4 + +#include +#include +#include +#include +#include +#include + +#include + +#define MAX3100_C (1<<14) +#define MAX3100_D (0<<14) +#define MAX3100_W (1<<15) +#define MAX3100_RX (0<<15) + +#define MAX3100_WC (MAX3100_W | MAX3100_C) +#define MAX3100_RC (MAX3100_RX | MAX3100_C) +#define MAX3100_WD (MAX3100_W | MAX3100_D) +#define MAX3100_RD (MAX3100_RX | MAX3100_D) +#define MAX3100_CMD (3 << 14) + +#define MAX3100_T (1<<14) +#define MAX3100_R (1<<15) + +#define MAX3100_FEN (1<<13) +#define MAX3100_SHDN (1<<12) +#define MAX3100_TM (1<<11) +#define MAX3100_RM (1<<10) +#define MAX3100_PM (1<<9) +#define MAX3100_RAM (1<<8) +#define MAX3100_IR (1<<7) +#define MAX3100_ST (1<<6) +#define MAX3100_PE (1<<5) +#define MAX3100_L (1<<4) +#define MAX3100_BAUD (0xf) + +#define MAX3100_TE (1<<10) +#define MAX3100_RAFE (1<<10) +#define MAX3100_RTS (1<<9) +#define MAX3100_CTS (1<<9) +#define MAX3100_PT (1<<8) +#define MAX3100_DATA (0xff) + +#define MAX3100_RT (MAX3100_R | MAX3100_T) +#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE) + +/* the following simulate a status reg for ignore_status_mask */ +#define MAX3100_STATUS_PE 1 +#define MAX3100_STATUS_FE 2 +#define MAX3100_STATUS_OE 4 + +struct max3100_port { + struct uart_port port; + struct spi_device *spi; + + int cts; /* last CTS received for flow ctrl */ + int tx_empty; /* last TX empty bit */ + + spinlock_t conf_lock; /* shared data */ + int conf_commit; /* need to make changes */ + int conf; /* configuration for the MAX31000 + * (bits 0-7, bits 8-11 are irqs) */ + int rts_commit; /* need to change rts */ + int rts; /* rts status */ + int baud; /* current baud rate */ + + int parity; /* keeps track if we should send parity */ +#define MAX3100_PARITY_ON 1 +#define MAX3100_PARITY_ODD 2 +#define MAX3100_7BIT 4 + int rx_enabled; /* if we should rx chars */ + + int irq; /* irq assigned to the max3100 */ + + int minor; /* minor number */ + int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ + int loopback; /* 1 if we are in loopback mode */ + + /* for handling irqs: need workqueue since we do spi_sync */ + struct workqueue_struct *workqueue; + struct work_struct work; + /* set to 1 to make the workhandler exit as soon as possible */ + int force_end_work; + /* need to know we are suspending to avoid deadlock on workqueue */ + int suspending; + + /* hook for suspending MAX3100 via dedicated pin */ + void (*max3100_hw_suspend) (int suspend); + + /* poll time (in ms) for ctrl lines */ + int poll_time; + /* and its timer */ + struct timer_list timer; +}; + +static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */ +static DEFINE_MUTEX(max3100s_lock); /* race on probe */ + +static int max3100_do_parity(struct max3100_port *s, u16 c) +{ + int parity; + + if (s->parity & MAX3100_PARITY_ODD) + parity = 1; + else + parity = 0; + + if (s->parity & MAX3100_7BIT) + c &= 0x7f; + else + c &= 0xff; + + parity = parity ^ (hweight8(c) & 1); + return parity; +} + +static int max3100_check_parity(struct max3100_port *s, u16 c) +{ + return max3100_do_parity(s, c) == ((c >> 8) & 1); +} + +static void max3100_calc_parity(struct max3100_port *s, u16 *c) +{ + if (s->parity & MAX3100_7BIT) + *c &= 0x7f; + else + *c &= 0xff; + + if (s->parity & MAX3100_PARITY_ON) + *c |= max3100_do_parity(s, *c) << 8; +} + +static void max3100_work(struct work_struct *w); + +static void max3100_dowork(struct max3100_port *s) +{ + if (!s->force_end_work && !work_pending(&s->work) && + !freezing(current) && !s->suspending) + queue_work(s->workqueue, &s->work); +} + +static void max3100_timeout(unsigned long data) +{ + struct max3100_port *s = (struct max3100_port *)data; + + if (s->port.info) { + max3100_dowork(s); + mod_timer(&s->timer, jiffies + s->poll_time); + } +} + +static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx) +{ + struct spi_message message; + u16 etx, erx; + int status; + struct spi_transfer tran = { + .tx_buf = &etx, + .rx_buf = &erx, + .len = 2, + }; + + etx = cpu_to_be16(tx); + spi_message_init(&message); + spi_message_add_tail(&tran, &message); + status = spi_sync(s->spi, &message); + if (status) { + dev_warn(&s->spi->dev, "error while calling spi_sync\n"); + return -EIO; + } + *rx = be16_to_cpu(erx); + s->tx_empty = (*rx & MAX3100_T) > 0; + dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx); + return 0; +} + +static int max3100_handlerx(struct max3100_port *s, u16 rx) +{ + unsigned int ch, flg, status = 0; + int ret = 0, cts; + + if (rx & MAX3100_R && s->rx_enabled) { + dev_dbg(&s->spi->dev, "%s\n", __func__); + ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff); + if (rx & MAX3100_RAFE) { + s->port.icount.frame++; + flg = TTY_FRAME; + status |= MAX3100_STATUS_FE; + } else { + if (s->parity & MAX3100_PARITY_ON) { + if (max3100_check_parity(s, rx)) { + s->port.icount.rx++; + flg = TTY_NORMAL; + } else { + s->port.icount.parity++; + flg = TTY_PARITY; + status |= MAX3100_STATUS_PE; + } + } else { + s->port.icount.rx++; + flg = TTY_NORMAL; + } + } + uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg); + ret = 1; + } + + cts = (rx & MAX3100_CTS) > 0; + if (s->cts != cts) { + s->cts = cts; + uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0); + } + + return ret; +} + +static void max3100_work(struct work_struct *w) +{ + struct max3100_port *s = container_of(w, struct max3100_port, work); + int rxchars; + u16 tx, rx; + int conf, cconf, rts, crts; + struct circ_buf *xmit = &s->port.info->xmit; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rxchars = 0; + do { + spin_lock(&s->conf_lock); + conf = s->conf; + cconf = s->conf_commit; + s->conf_commit = 0; + rts = s->rts; + crts = s->rts_commit; + s->rts_commit = 0; + spin_unlock(&s->conf_lock); + if (cconf) + max3100_sr(s, MAX3100_WC | conf, &rx); + if (crts) { + max3100_sr(s, MAX3100_WD | MAX3100_TE | + (s->rts ? MAX3100_RTS : 0), &rx); + rxchars += max3100_handlerx(s, rx); + } + + max3100_sr(s, MAX3100_RD, &rx); + rxchars += max3100_handlerx(s, rx); + + if (rx & MAX3100_T) { + tx = 0xffff; + if (s->port.x_char) { + tx = s->port.x_char; + s->port.icount.tx++; + s->port.x_char = 0; + } else if (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)) { + tx = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + s->port.icount.tx++; + } + if (tx != 0xffff) { + max3100_calc_parity(s, &tx); + tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0); + max3100_sr(s, tx, &rx); + rxchars += max3100_handlerx(s, rx); + } + } + + if (rxchars > 16 && s->port.info->port.tty != NULL) { + tty_flip_buffer_push(s->port.info->port.tty); + rxchars = 0; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + } while (!s->force_end_work && + !freezing(current) && + ((rx & MAX3100_R) || + (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)))); + + if (rxchars > 0 && s->port.info->port.tty != NULL) + tty_flip_buffer_push(s->port.info->port.tty); +} + +static irqreturn_t max3100_irq(int irqno, void *dev_id) +{ + struct max3100_port *s = dev_id; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); + return IRQ_HANDLED; +} + +static void max3100_enable_ms(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + if (s->poll_time > 0) + mod_timer(&s->timer, jiffies); + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_start_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); +} + +static void max3100_stop_rx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->rx_enabled = 0; + spin_lock(&s->conf_lock); + s->conf &= ~MAX3100_RM; + s->conf_commit = 1; + spin_unlock(&s->conf_lock); + max3100_dowork(s); +} + +static unsigned int max3100_tx_empty(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + return s->tx_empty; +} + +static unsigned int max3100_get_mctrl(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + /* always assert DCD and DSR since these lines are not wired */ + return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR; +} + +static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int rts; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rts = (mctrl & TIOCM_RTS) > 0; + + spin_lock(&s->conf_lock); + if (s->rts != rts) { + s->rts = rts; + s->rts_commit = 1; + max3100_dowork(s); + } + spin_unlock(&s->conf_lock); +} + +static void +max3100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int baud = 0; + unsigned cflag; + u32 param_new, param_mask, parity = 0; + struct tty_struct *tty = s->port.info->port.tty; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + if (!tty) + return; + + cflag = termios->c_cflag; + param_new = 0; + param_mask = 0; + + baud = tty_get_baud_rate(tty); + param_new = s->conf & MAX3100_BAUD; + switch (baud) { + case 300: + if (s->crystal) + baud = s->baud; + else + param_new = 15; + break; + case 600: + param_new = 14 + s->crystal; + break; + case 1200: + param_new = 13 + s->crystal; + break; + case 2400: + param_new = 12 + s->crystal; + break; + case 4800: + param_new = 11 + s->crystal; + break; + case 9600: + param_new = 10 + s->crystal; + break; + case 19200: + param_new = 9 + s->crystal; + break; + case 38400: + param_new = 8 + s->crystal; + break; + case 57600: + param_new = 1 + s->crystal; + break; + case 115200: + param_new = 0 + s->crystal; + break; + case 230400: + if (s->crystal) + param_new = 0; + else + baud = s->baud; + break; + default: + baud = s->baud; + } + tty_encode_baud_rate(tty, baud, baud); + s->baud = baud; + param_mask |= MAX3100_BAUD; + + if ((cflag & CSIZE) == CS8) { + param_new &= ~MAX3100_L; + parity &= ~MAX3100_7BIT; + } else { + param_new |= MAX3100_L; + parity |= MAX3100_7BIT; + cflag = (cflag & ~CSIZE) | CS7; + } + param_mask |= MAX3100_L; + + if (cflag & CSTOPB) + param_new |= MAX3100_ST; + else + param_new &= ~MAX3100_ST; + param_mask |= MAX3100_ST; + + if (cflag & PARENB) { + param_new |= MAX3100_PE; + parity |= MAX3100_PARITY_ON; + } else { + param_new &= ~MAX3100_PE; + parity &= ~MAX3100_PARITY_ON; + } + param_mask |= MAX3100_PE; + + if (cflag & PARODD) + parity |= MAX3100_PARITY_ODD; + else + parity &= ~MAX3100_PARITY_ODD; + + /* mask termios capabilities we don't support */ + cflag &= ~CMSPAR; + termios->c_cflag = cflag; + + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= + MAX3100_STATUS_PE | MAX3100_STATUS_FE | + MAX3100_STATUS_OE; + + /* we are sending char from a workqueue so enable */ + s->port.info->port.tty->low_latency = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock(&s->conf_lock); + s->conf = (s->conf & ~param_mask) | (param_new & param_mask); + s->conf_commit = 1; + s->parity = parity; + spin_unlock(&s->conf_lock); + max3100_dowork(s); + + if (UART_ENABLE_MS(&s->port, termios->c_cflag)) + max3100_enable_ms(&s->port); +} + +static void max3100_shutdown(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->suspending) + return; + + s->force_end_work = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + if (s->workqueue) { + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + if (s->irq) + free_irq(s->irq, s); + + /* set shutdown mode to save power */ + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } +} + +static int max3100_startup(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + char b[12]; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->conf = MAX3100_RM; + s->baud = s->crystal ? 230400 : 115200; + s->rx_enabled = 1; + + if (s->suspending) + return 0; + + s->force_end_work = 0; + s->parity = 0; + s->rts = 0; + + sprintf(b, "max3100-%d", s->minor); + s->workqueue = create_freezeable_workqueue(b); + if (!s->workqueue) { + dev_warn(&s->spi->dev, "cannot create workqueue\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3100_work); + + if (request_irq(s->irq, max3100_irq, + IRQF_TRIGGER_FALLING, "max3100", s) < 0) { + dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq); + s->irq = 0; + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + if (s->loopback) { + u16 tx, rx; + tx = 0x4001; + max3100_sr(s, tx, &rx); + } + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + s->conf_commit = 1; + max3100_dowork(s); + /* wait for clock to settle */ + msleep(50); + + max3100_enable_ms(&s->port); + + return 0; +} + +static const char *max3100_type(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL; +} + +static void max3100_release_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_config_port(struct uart_port *port, int flags) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (flags & UART_CONFIG_TYPE) + s->port.type = PORT_MAX3100; +} + +static int max3100_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int ret = -EINVAL; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + ret = 0; + return ret; +} + +static void max3100_stop_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static int max3100_request_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + return 0; +} + +static void max3100_break_ctl(struct uart_port *port, int break_state) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static struct uart_ops max3100_ops = { + .tx_empty = max3100_tx_empty, + .set_mctrl = max3100_set_mctrl, + .get_mctrl = max3100_get_mctrl, + .stop_tx = max3100_stop_tx, + .start_tx = max3100_start_tx, + .stop_rx = max3100_stop_rx, + .enable_ms = max3100_enable_ms, + .break_ctl = max3100_break_ctl, + .startup = max3100_startup, + .shutdown = max3100_shutdown, + .set_termios = max3100_set_termios, + .type = max3100_type, + .release_port = max3100_release_port, + .request_port = max3100_request_port, + .config_port = max3100_config_port, + .verify_port = max3100_verify_port, +}; + +static struct uart_driver max3100_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .major = MAX3100_MAJOR, + .minor = MAX3100_MINOR, + .nr = MAX_MAX3100, +}; +static int uart_driver_registered; + +static int __devinit max3100_probe(struct spi_device *spi) +{ + int i, retval; + struct plat_max3100 *pdata; + u16 tx, rx; + + mutex_lock(&max3100s_lock); + + if (!uart_driver_registered) { + uart_driver_registered = 1; + retval = uart_register_driver(&max3100_uart_driver); + if (retval) { + printk(KERN_ERR "Couldn't register max3100 uart driver\n"); + mutex_unlock(&max3100s_lock); + return retval; + } + } + + for (i = 0; i < MAX_MAX3100; i++) + if (!max3100s[i]) + break; + if (i == MAX_MAX3100) { + dev_warn(&spi->dev, "too many MAX3100 chips\n"); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + + max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL); + if (!max3100s[i]) { + dev_warn(&spi->dev, + "kmalloc for max3100 structure %d failed!\n", i); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + max3100s[i]->spi = spi; + max3100s[i]->irq = spi->irq; + spin_lock_init(&max3100s[i]->conf_lock); + dev_set_drvdata(&spi->dev, max3100s[i]); + pdata = spi->dev.platform_data; + max3100s[i]->crystal = pdata->crystal; + max3100s[i]->loopback = pdata->loopback; + max3100s[i]->poll_time = pdata->poll_time * HZ / 1000; + if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0) + max3100s[i]->poll_time = 1; + max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend; + max3100s[i]->minor = i; + init_timer(&max3100s[i]->timer); + max3100s[i]->timer.function = max3100_timeout; + max3100s[i]->timer.data = (unsigned long) max3100s[i]; + + dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i); + max3100s[i]->port.irq = max3100s[i]->irq; + max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200; + max3100s[i]->port.fifosize = 16; + max3100s[i]->port.ops = &max3100_ops; + max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + max3100s[i]->port.line = i; + max3100s[i]->port.type = PORT_MAX3100; + max3100s[i]->port.dev = &spi->dev; + retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port); + if (retval < 0) + dev_warn(&spi->dev, + "uart_add_one_port failed for line %d with error %d\n", + i, retval); + + /* set shutdown mode to save power. Will be woken-up on open */ + if (max3100s[i]->max3100_hw_suspend) + max3100s[i]->max3100_hw_suspend(1); + else { + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(max3100s[i], tx, &rx); + } + mutex_unlock(&max3100s_lock); + return 0; +} + +static int __devexit max3100_remove(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + int i; + + mutex_lock(&max3100s_lock); + + /* find out the index for the chip we are removing */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i] == s) + break; + + dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i); + uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port); + kfree(max3100s[i]); + max3100s[i] = NULL; + + /* check if this is the last chip we have */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i]) { + mutex_unlock(&max3100s_lock); + return 0; + } + pr_debug("removing max3100 driver\n"); + uart_unregister_driver(&max3100_uart_driver); + + mutex_unlock(&max3100s_lock); + return 0; +} + +#ifdef CONFIG_PM + +static int max3100_suspend(struct spi_device *spi, pm_message_t state) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + disable_irq(s->irq); + + s->suspending = 1; + uart_suspend_port(&max3100_uart_driver, &s->port); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + /* no HW suspend, so do SW one */ + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } + return 0; +} + +static int max3100_resume(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + uart_resume_port(&max3100_uart_driver, &s->port); + s->suspending = 0; + + enable_irq(s->irq); + + s->conf_commit = 1; + if (s->workqueue) + max3100_dowork(s); + + return 0; +} + +#else +#define max3100_suspend NULL +#define max3100_resume NULL +#endif + +static struct spi_driver max3100_driver = { + .driver = { + .name = "max3100", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = max3100_probe, + .remove = __devexit_p(max3100_remove), + .suspend = max3100_suspend, + .resume = max3100_resume, +}; + +static int __init max3100_init(void) +{ + return spi_register_driver(&max3100_driver); +} +module_init(max3100_init); + +static void __exit max3100_exit(void) +{ + spi_unregister_driver(&max3100_driver); +} +module_exit(max3100_exit); + +MODULE_DESCRIPTION("MAX3100 driver"); +MODULE_AUTHOR("Christian Pellegrin "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h new file mode 100644 index 0000000..4976bef --- /dev/null +++ b/include/linux/serial_max3100.h @@ -0,0 +1,52 @@ +/* + * + * Copyright (C) 2007 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +#ifndef _LINUX_SERIAL_MAX3100_H +#define _LINUX_SERIAL_MAX3100_H 1 + + +/** + * struct plat_max3100 - MAX3100 SPI UART platform data + * @loopback: force MAX3100 in loopback + * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432 + * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook + * called on suspend and resume to activate it. + * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw + * flow ctrl is possible but you have less CPU usage) + * + * You should use this structure in your machine description to specify + * how the MAX3100 is connected. Example: + * + * static struct plat_max3100 max3100_plat_data = { + * .loopback = 0, + * .crystal = 0, + * .poll_time = 100, + * }; + * + * static struct spi_board_info spi_board_info[] = { + * { + * .modalias = "max3100", + * .platform_data = &max3100_plat_data, + * .irq = IRQ_EINT12, + * .max_speed_hz = 5*1000*1000, + * .chip_select = 0, + * }, + * }; + * + **/ +struct plat_max3100 { + int loopback; + int crystal; + void (*max3100_hw_suspend) (int suspend); + int poll_time; +}; + +#endif -- cgit v0.10.2 From c5cacb3bf91b0841e5a721ca303658a407d5c34f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 8 Apr 2009 15:41:25 -0700 Subject: ethoc: fix library build errors ethoc indirectly uses crc32_le() and bitrev32(), so select those library functions to be built. drivers/built-in.o: In function `ethoc_set_multicast_list': ethoc.c:(.text+0x6226f): undefined reference to `crc32_le' ethoc.c:(.text+0x62276): undefined reference to `bitrev32' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9e7baec..78585fb 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -977,6 +977,8 @@ config ETHOC depends on NET_ETHERNET && HAS_IOMEM select MII select PHYLIB + select CRC32 + select BITREVERSE help Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. -- cgit v0.10.2 From 150899d29367eb60302bcb710e779617d04aceea Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Wed, 8 Apr 2009 15:42:15 -0700 Subject: smsc911x: correct debugging message on mii read timeout the warning printed when a mii READ times out currently says "Timed out waiting for MII write to finish". This patch corrects this. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 6da6781..eb7db03 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -317,7 +317,7 @@ static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx) goto out; } - SMSC_WARNING(HW, "Timed out waiting for MII write to finish"); + SMSC_WARNING(HW, "Timed out waiting for MII read to finish"); reg = -EIO; out: -- cgit v0.10.2 From b5e86db4c7f6397ef86ab5e4a3fbece966935577 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 8 Apr 2009 15:42:46 -0700 Subject: mv643xx_eth: don't reset the rx coal timer on interface up Move SDMA configuration from interface up to port probe, to prevent overwriting the receive coalescing timer value on interface up. Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index a56d9d2..b3185bf 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2274,8 +2274,6 @@ static void port_start(struct mv643xx_eth_private *mp) pscr |= FORCE_LINK_PASS; wrlp(mp, PORT_SERIAL_CONTROL, pscr); - wrlp(mp, SDMA_CONFIG, PORT_SDMA_CONFIG_DEFAULT_VALUE); - /* * Configure TX path and queues. */ @@ -2957,6 +2955,8 @@ static int mv643xx_eth_probe(struct platform_device *pdev) netif_carrier_off(dev); + wrlp(mp, SDMA_CONFIG, PORT_SDMA_CONFIG_DEFAULT_VALUE); + set_rx_coal(mp, 250); set_tx_coal(mp, 0); -- cgit v0.10.2 From 58f3e0a864c46dadbeadf682e6bbdcab14ba19d3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 8 Apr 2009 15:44:04 -0700 Subject: niu: Fix error handling platform_device_register_simple() returns ERR_PTR(), not NULL, if an error occurs. Found by smatch (http://repo.or.cz/w/smatch.git). Compile tested. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 73cac6c..2cd6109 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -9542,7 +9542,7 @@ static struct niu_parent * __devinit niu_new_parent(struct niu *np, plat_dev = platform_device_register_simple("niu", niu_parent_index, NULL, 0); - if (!plat_dev) + if (IS_ERR(plat_dev)) return NULL; for (i = 0; attr_name(niu_parent_attributes[i]); i++) { -- cgit v0.10.2 From fb922b0de60d64473f68515a90a7df603267d245 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 8 Apr 2009 15:44:45 -0700 Subject: FEC driver: add missing #endif Signed-off-by: Sascha Hauer Signed-off-by: David S. Miller diff --git a/drivers/net/fec.c b/drivers/net/fec.c index a515acc..682e7f0 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1240,6 +1240,7 @@ static void __inline__ fec_phy_ack_intr(void) icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); *icrp = 0x0d000000; } +#endif #ifdef CONFIG_M5272 static void __inline__ fec_get_mac(struct net_device *dev) -- cgit v0.10.2 From 5ee1c32628e4baa0d99146a8adc594220f947aad Mon Sep 17 00:00:00 2001 From: Bastian Blank Date: Wed, 8 Apr 2009 15:50:07 -0700 Subject: bnx2: Don't use reserved names The mips identifier is reserved by gcc on mips plattforms. Don't use it in the code. Signed-off-by: Bastian Blank Tested-by: Martin Michlmayr Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 9d268be..d478391 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -3427,8 +3427,8 @@ static int __devinit bnx2_request_firmware(struct bnx2 *bp) { const char *mips_fw_file, *rv2p_fw_file; - const struct bnx2_mips_fw_file *mips; - const struct bnx2_rv2p_fw_file *rv2p; + const struct bnx2_mips_fw_file *mips_fw; + const struct bnx2_rv2p_fw_file *rv2p_fw; int rc; if (CHIP_NUM(bp) == CHIP_NUM_5709) { @@ -3452,21 +3452,21 @@ bnx2_request_firmware(struct bnx2 *bp) rv2p_fw_file); return rc; } - mips = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data; - rv2p = (const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data; - if (bp->mips_firmware->size < sizeof(*mips) || - check_mips_fw_entry(bp->mips_firmware, &mips->com) || - check_mips_fw_entry(bp->mips_firmware, &mips->cp) || - check_mips_fw_entry(bp->mips_firmware, &mips->rxp) || - check_mips_fw_entry(bp->mips_firmware, &mips->tpat) || - check_mips_fw_entry(bp->mips_firmware, &mips->txp)) { + mips_fw = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data; + rv2p_fw = (const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data; + if (bp->mips_firmware->size < sizeof(*mips_fw) || + check_mips_fw_entry(bp->mips_firmware, &mips_fw->com) || + check_mips_fw_entry(bp->mips_firmware, &mips_fw->cp) || + check_mips_fw_entry(bp->mips_firmware, &mips_fw->rxp) || + check_mips_fw_entry(bp->mips_firmware, &mips_fw->tpat) || + check_mips_fw_entry(bp->mips_firmware, &mips_fw->txp)) { printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n", mips_fw_file); return -EINVAL; } - if (bp->rv2p_firmware->size < sizeof(*rv2p) || - check_fw_section(bp->rv2p_firmware, &rv2p->proc1.rv2p, 8, true) || - check_fw_section(bp->rv2p_firmware, &rv2p->proc2.rv2p, 8, true)) { + if (bp->rv2p_firmware->size < sizeof(*rv2p_fw) || + check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc1.rv2p, 8, true) || + check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc2.rv2p, 8, true)) { printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n", rv2p_fw_file); return -EINVAL; -- cgit v0.10.2 From bc4de26040d3bdc170aaa47044adf9d318a06772 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 8 Apr 2009 15:50:43 -0700 Subject: r6040: set MODULE_VERSION This patch sets MODULE_VERSION in order to help users track changes to this module. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 5e8540b..6f97b47 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -160,6 +160,7 @@ MODULE_AUTHOR("Sten Wang ," "Florian Fainelli "); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet driver"); +MODULE_VERSION(DRV_VERSION " " DRV_RELDATE); /* RX and TX interrupts that we handle */ #define RX_INTS (RX_FIFO_FULL | RX_NO_DESC | RX_FINISH) -- cgit v0.10.2 From efb6c736da8f9c455c22bcbf717dbcf1889d0325 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Apr 2009 15:52:16 -0700 Subject: niu: Fix unused variable warning. Don't strain gcc's tiny mind. Signed-off-by: David S. Miller diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 2cd6109..2b17453 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -4834,6 +4834,7 @@ static int niu_compute_rbr_cfig_b(struct rx_ring_info *rp, u64 *ret) { u64 val = 0; + *ret = 0; switch (rp->rbr_block_size) { case 4 * 1024: val |= (RBR_BLKSIZE_4K << RBR_CFIG_B_BLKSIZE_SHIFT); -- cgit v0.10.2 From 93889d7574ec90bb4455929ad0536d8df74bc730 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Wed, 8 Apr 2009 15:56:33 -0700 Subject: drivers/net/eql.c: Fix a dev leakage. After dev_get_by_name(), we should follow a dev_put(). Signed-off-by: Yang Hongyang Signed-off-by: David S. Miller diff --git a/drivers/net/eql.c b/drivers/net/eql.c index 51ead79..5210bb1 100644 --- a/drivers/net/eql.c +++ b/drivers/net/eql.c @@ -542,6 +542,8 @@ static int eql_s_slave_cfg(struct net_device *dev, slave_config_t __user *scp) } spin_unlock_bh(&eql->queue.lock); + dev_put(slave_dev); + return ret; } -- cgit v0.10.2 From d4e0fe01a38a073568aee541a0247fe734095979 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 7 Apr 2009 14:37:34 +0000 Subject: igbvf: add new driver to support 82576 virtual functions This adds an igbvf driver to handle virtual functions provided by the igb driver when SR-IOV has been enabled. A virtual function is a lightweight pci-e function that supports a single queue and shares resources with the 82576 physical function contained within the igb driver. To spawn virtual functions from the igb driver all that is needed is to enable CONFIG_PCI_IOV and have an 82576 Ethernet adapter on a system that supports SR-IOV in the BIOS. The virtual functions will appear after the interface is loaded. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 78585fb..9e92154 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2058,6 +2058,27 @@ config IGB_DCA driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. +config IGBVF + tristate "Intel(R) 82576 Virtual Function Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82576 virtual functions. For more + information on how to identify your adapter, go to the Adapter & + Driver ID Guide at: + + + + For general information and support, go to the Intel support + website at: + + + + More specific information on configuring the driver is in + . + + To compile this driver as a module, choose M here. The module + will be called igbvf. + source "drivers/net/ixp2000/Kconfig" config MYRI_SBUS diff --git a/drivers/net/Makefile b/drivers/net/Makefile index edc9a0d..1fc4602 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_E1000E) += e1000e/ obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ obj-$(CONFIG_IGB) += igb/ +obj-$(CONFIG_IGBVF) += igbvf/ obj-$(CONFIG_IXGBE) += ixgbe/ obj-$(CONFIG_IXGB) += ixgb/ obj-$(CONFIG_IP1000) += ipg.o diff --git a/drivers/net/igbvf/Makefile b/drivers/net/igbvf/Makefile new file mode 100644 index 0000000..c2f150d --- /dev/null +++ b/drivers/net/igbvf/Makefile @@ -0,0 +1,38 @@ +################################################################################ +# +# Intel(R) 82576 Virtual Function Linux driver +# Copyright(c) 2009 Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# +# Contact Information: +# e1000-devel Mailing List +# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 +# +################################################################################ + +# +# Makefile for the Intel(R) 82576 VF ethernet driver +# + +obj-$(CONFIG_IGBVF) += igbvf.o + +igbvf-objs := vf.o \ + mbx.o \ + ethtool.o \ + netdev.o + diff --git a/drivers/net/igbvf/defines.h b/drivers/net/igbvf/defines.h new file mode 100644 index 0000000..88a4753 --- /dev/null +++ b/drivers/net/igbvf/defines.h @@ -0,0 +1,125 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 1999 - 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_DEFINES_H_ +#define _E1000_DEFINES_H_ + +/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ +#define REQ_TX_DESCRIPTOR_MULTIPLE 8 +#define REQ_RX_DESCRIPTOR_MULTIPLE 8 + +/* IVAR valid bit */ +#define E1000_IVAR_VALID 0x80 + +/* Receive Descriptor bit definitions */ +#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ +#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ +#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ +#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ +#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ +#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ + +#define E1000_RXDEXT_STATERR_CE 0x01000000 +#define E1000_RXDEXT_STATERR_SE 0x02000000 +#define E1000_RXDEXT_STATERR_SEQ 0x04000000 +#define E1000_RXDEXT_STATERR_CXE 0x10000000 +#define E1000_RXDEXT_STATERR_TCPE 0x20000000 +#define E1000_RXDEXT_STATERR_IPE 0x40000000 +#define E1000_RXDEXT_STATERR_RXE 0x80000000 + + +/* Same mask, but for extended and packet split descriptors */ +#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) + +/* Device Control */ +#define E1000_CTRL_RST 0x04000000 /* Global reset */ + +/* Device Status */ +#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ +#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ +#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ +#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ +#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ +#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ + +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + +/* Transmit Descriptor bit definitions */ +#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ +#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ + +#define MAX_JUMBO_FRAME_SIZE 0x3F00 + +/* 802.1q VLAN Packet Size */ +#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ + +/* Error Codes */ +#define E1000_SUCCESS 0 +#define E1000_ERR_CONFIG 3 +#define E1000_ERR_MAC_INIT 5 +#define E1000_ERR_MBX 15 + +#ifndef ETH_ADDR_LEN +#define ETH_ADDR_LEN 6 +#endif + +/* SRRCTL bit definitions */ +#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ +#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 +#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ +#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 +#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 +#define E1000_SRRCTL_DROP_EN 0x80000000 + +#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 + +/* Additional Descriptor Control definitions */ +#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */ +#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */ + +/* Direct Cache Access (DCA) definitions */ +#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ + +#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ + +#endif /* _E1000_DEFINES_H_ */ diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c new file mode 100644 index 0000000..1dcaa69 --- /dev/null +++ b/drivers/net/igbvf/ethtool.c @@ -0,0 +1,540 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for igbvf */ + +#include +#include +#include +#include +#include + +#include "igbvf.h" +#include + + +struct igbvf_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; + int base_stat_offset; +}; + +#define IGBVF_STAT(current, base) \ + sizeof(((struct igbvf_adapter *)0)->current), \ + offsetof(struct igbvf_adapter, current), \ + offsetof(struct igbvf_adapter, base) + +static const struct igbvf_stats igbvf_gstrings_stats[] = { + { "rx_packets", IGBVF_STAT(stats.gprc, stats.base_gprc) }, + { "tx_packets", IGBVF_STAT(stats.gptc, stats.base_gptc) }, + { "rx_bytes", IGBVF_STAT(stats.gorc, stats.base_gorc) }, + { "tx_bytes", IGBVF_STAT(stats.gotc, stats.base_gotc) }, + { "multicast", IGBVF_STAT(stats.mprc, stats.base_mprc) }, + { "lbrx_bytes", IGBVF_STAT(stats.gorlbc, stats.base_gorlbc) }, + { "lbrx_packets", IGBVF_STAT(stats.gprlbc, stats.base_gprlbc) }, + { "tx_restart_queue", IGBVF_STAT(restart_queue, zero_base) }, + { "rx_long_byte_count", IGBVF_STAT(stats.gorc, stats.base_gorc) }, + { "rx_csum_offload_good", IGBVF_STAT(hw_csum_good, zero_base) }, + { "rx_csum_offload_errors", IGBVF_STAT(hw_csum_err, zero_base) }, + { "rx_header_split", IGBVF_STAT(rx_hdr_split, zero_base) }, + { "alloc_rx_buff_failed", IGBVF_STAT(alloc_rx_buff_failed, zero_base) }, +}; + +#define IGBVF_GLOBAL_STATS_LEN ARRAY_SIZE(igbvf_gstrings_stats) + +static const char igbvf_gstrings_test[][ETH_GSTRING_LEN] = { + "Link test (on/offline)" +}; + +#define IGBVF_TEST_LEN ARRAY_SIZE(igbvf_gstrings_test) + +static int igbvf_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 status; + + ecmd->supported = SUPPORTED_1000baseT_Full; + + ecmd->advertising = ADVERTISED_1000baseT_Full; + + ecmd->port = -1; + ecmd->transceiver = XCVR_DUMMY1; + + status = er32(STATUS); + if (status & E1000_STATUS_LU) { + if (status & E1000_STATUS_SPEED_1000) + ecmd->speed = 1000; + else if (status & E1000_STATUS_SPEED_100) + ecmd->speed = 100; + else + ecmd->speed = 10; + + if (status & E1000_STATUS_FD) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = AUTONEG_DISABLE; + + return 0; +} + +static u32 igbvf_get_link(struct net_device *netdev) +{ + return netif_carrier_ok(netdev); +} + +static int igbvf_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + return -EOPNOTSUPP; +} + +static void igbvf_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + return; +} + +static int igbvf_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + return -EOPNOTSUPP; +} + +static u32 igbvf_get_tx_csum(struct net_device *netdev) +{ + return ((netdev->features & NETIF_F_IP_CSUM) != 0); +} + +static int igbvf_set_tx_csum(struct net_device *netdev, u32 data) +{ + if (data) + netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM); + else + netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM); + return 0; +} + +static int igbvf_set_tso(struct net_device *netdev, u32 data) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + int i; + struct net_device *v_netdev; + + if (data) { + netdev->features |= NETIF_F_TSO; + netdev->features |= NETIF_F_TSO6; + } else { + netdev->features &= ~NETIF_F_TSO; + netdev->features &= ~NETIF_F_TSO6; + /* disable TSO on all VLANs if they're present */ + if (!adapter->vlgrp) + goto tso_out; + for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { + v_netdev = vlan_group_get_device(adapter->vlgrp, i); + if (!v_netdev) + continue; + + v_netdev->features &= ~NETIF_F_TSO; + v_netdev->features &= ~NETIF_F_TSO6; + vlan_group_set_device(adapter->vlgrp, i, v_netdev); + } + } + +tso_out: + dev_info(&adapter->pdev->dev, "TSO is %s\n", + data ? "Enabled" : "Disabled"); + adapter->flags |= FLAG_TSO_FORCE; + return 0; +} + +static u32 igbvf_get_msglevel(struct net_device *netdev) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void igbvf_set_msglevel(struct net_device *netdev, u32 data) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int igbvf_get_regs_len(struct net_device *netdev) +{ +#define IGBVF_REGS_LEN 8 + return IGBVF_REGS_LEN * sizeof(u32); +} + +static void igbvf_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u8 revision_id; + + memset(p, 0, IGBVF_REGS_LEN * sizeof(u32)); + + pci_read_config_byte(adapter->pdev, PCI_REVISION_ID, &revision_id); + + regs->version = (1 << 24) | (revision_id << 16) | adapter->pdev->device; + + regs_buff[0] = er32(CTRL); + regs_buff[1] = er32(STATUS); + + regs_buff[2] = er32(RDLEN(0)); + regs_buff[3] = er32(RDH(0)); + regs_buff[4] = er32(RDT(0)); + + regs_buff[5] = er32(TDLEN(0)); + regs_buff[6] = er32(TDH(0)); + regs_buff[7] = er32(TDT(0)); +} + +static int igbvf_get_eeprom_len(struct net_device *netdev) +{ + return 0; +} + +static int igbvf_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + return -EOPNOTSUPP; +} + +static int igbvf_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + return -EOPNOTSUPP; +} + +static void igbvf_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + char firmware_version[32] = "N/A"; + + strncpy(drvinfo->driver, igbvf_driver_name, 32); + strncpy(drvinfo->version, igbvf_driver_version, 32); + strncpy(drvinfo->fw_version, firmware_version, 32); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); + drvinfo->regdump_len = igbvf_get_regs_len(netdev); + drvinfo->eedump_len = igbvf_get_eeprom_len(netdev); +} + +static void igbvf_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct igbvf_ring *tx_ring = adapter->tx_ring; + struct igbvf_ring *rx_ring = adapter->rx_ring; + + ring->rx_max_pending = IGBVF_MAX_RXD; + ring->tx_max_pending = IGBVF_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rx_ring->count; + ring->tx_pending = tx_ring->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int igbvf_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct igbvf_ring *temp_ring; + int err; + u32 new_rx_count, new_tx_count; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + new_rx_count = max(ring->rx_pending, (u32)IGBVF_MIN_RXD); + new_rx_count = min(new_rx_count, (u32)IGBVF_MAX_RXD); + new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE); + + new_tx_count = max(ring->tx_pending, (u32)IGBVF_MIN_TXD); + new_tx_count = min(new_tx_count, (u32)IGBVF_MAX_TXD); + new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE); + + if ((new_tx_count == adapter->tx_ring->count) && + (new_rx_count == adapter->rx_ring->count)) { + /* nothing to do */ + return 0; + } + + temp_ring = vmalloc(sizeof(struct igbvf_ring)); + if (!temp_ring) + return -ENOMEM; + + while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) + msleep(1); + + if (netif_running(adapter->netdev)) + igbvf_down(adapter); + + /* + * We can't just free everything and then setup again, + * because the ISRs in MSI-X mode get passed pointers + * to the tx and rx ring structs. + */ + if (new_tx_count != adapter->tx_ring->count) { + memcpy(temp_ring, adapter->tx_ring, sizeof(struct igbvf_ring)); + + temp_ring->count = new_tx_count; + err = igbvf_setup_tx_resources(adapter, temp_ring); + if (err) + goto err_setup; + + igbvf_free_tx_resources(adapter->tx_ring); + + memcpy(adapter->tx_ring, temp_ring, sizeof(struct igbvf_ring)); + } + + if (new_rx_count != adapter->rx_ring->count) { + memcpy(temp_ring, adapter->rx_ring, sizeof(struct igbvf_ring)); + + temp_ring->count = new_rx_count; + err = igbvf_setup_rx_resources(adapter, temp_ring); + if (err) + goto err_setup; + + igbvf_free_rx_resources(adapter->rx_ring); + + memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring)); + } + + err = 0; +err_setup: + if (netif_running(adapter->netdev)) + igbvf_up(adapter); + + clear_bit(__IGBVF_RESETTING, &adapter->state); + vfree(temp_ring); + return err; +} + +static int igbvf_link_test(struct igbvf_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + *data = 0; + + hw->mac.ops.check_for_link(hw); + + if (!(er32(STATUS) & E1000_STATUS_LU)) + *data = 1; + + return *data; +} + +static int igbvf_get_self_test_count(struct net_device *netdev) +{ + return IGBVF_TEST_LEN; +} + +static int igbvf_get_stats_count(struct net_device *netdev) +{ + return IGBVF_GLOBAL_STATS_LEN; +} + +static void igbvf_diag_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + + set_bit(__IGBVF_TESTING, &adapter->state); + + /* + * Link test performed before hardware reset so autoneg doesn't + * interfere with test result + */ + if (igbvf_link_test(adapter, &data[0])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + clear_bit(__IGBVF_TESTING, &adapter->state); + msleep_interruptible(4 * 1000); +} + +static void igbvf_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + wol->supported = 0; + wol->wolopts = 0; + + return; +} + +static int igbvf_set_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + return -EOPNOTSUPP; +} + +static int igbvf_phys_id(struct net_device *netdev, u32 data) +{ + return 0; +} + +static int igbvf_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + + if (adapter->itr_setting <= 3) + ec->rx_coalesce_usecs = adapter->itr_setting; + else + ec->rx_coalesce_usecs = adapter->itr_setting >> 2; + + return 0; +} + +static int igbvf_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) || + ((ec->rx_coalesce_usecs > 3) && + (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) || + (ec->rx_coalesce_usecs == 2)) + return -EINVAL; + + /* convert to rate of irq's per second */ + if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) { + adapter->itr = IGBVF_START_ITR; + adapter->itr_setting = ec->rx_coalesce_usecs; + } else { + adapter->itr = ec->rx_coalesce_usecs << 2; + adapter->itr_setting = adapter->itr; + } + + writel(adapter->itr, + hw->hw_addr + adapter->rx_ring[0].itr_register); + + return 0; +} + +static int igbvf_nway_reset(struct net_device *netdev) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + igbvf_reinit_locked(adapter); + return 0; +} + + +static void igbvf_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, + u64 *data) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + int i; + + igbvf_update_stats(adapter); + for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) { + char *p = (char *)adapter + + igbvf_gstrings_stats[i].stat_offset; + char *b = (char *)adapter + + igbvf_gstrings_stats[i].base_stat_offset; + data[i] = ((igbvf_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? (*(u64 *)p - *(u64 *)b) : + (*(u32 *)p - *(u32 *)b)); + } + +} + +static void igbvf_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *igbvf_gstrings_test, sizeof(igbvf_gstrings_test)); + break; + case ETH_SS_STATS: + for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) { + memcpy(p, igbvf_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + } +} + +static const struct ethtool_ops igbvf_ethtool_ops = { + .get_settings = igbvf_get_settings, + .set_settings = igbvf_set_settings, + .get_drvinfo = igbvf_get_drvinfo, + .get_regs_len = igbvf_get_regs_len, + .get_regs = igbvf_get_regs, + .get_wol = igbvf_get_wol, + .set_wol = igbvf_set_wol, + .get_msglevel = igbvf_get_msglevel, + .set_msglevel = igbvf_set_msglevel, + .nway_reset = igbvf_nway_reset, + .get_link = igbvf_get_link, + .get_eeprom_len = igbvf_get_eeprom_len, + .get_eeprom = igbvf_get_eeprom, + .set_eeprom = igbvf_set_eeprom, + .get_ringparam = igbvf_get_ringparam, + .set_ringparam = igbvf_set_ringparam, + .get_pauseparam = igbvf_get_pauseparam, + .set_pauseparam = igbvf_set_pauseparam, + .get_tx_csum = igbvf_get_tx_csum, + .set_tx_csum = igbvf_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = igbvf_set_tso, + .self_test = igbvf_diag_test, + .get_strings = igbvf_get_strings, + .phys_id = igbvf_phys_id, + .get_ethtool_stats = igbvf_get_ethtool_stats, + .self_test_count = igbvf_get_self_test_count, + .get_stats_count = igbvf_get_stats_count, + .get_coalesce = igbvf_get_coalesce, + .set_coalesce = igbvf_set_coalesce, +}; + +void igbvf_set_ethtool_ops(struct net_device *netdev) +{ + /* have to "undeclare" const on this struct to remove warnings */ + SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&igbvf_ethtool_ops); +} diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h new file mode 100644 index 0000000..936ed2a --- /dev/null +++ b/drivers/net/igbvf/igbvf.h @@ -0,0 +1,335 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* Linux PRO/1000 Ethernet Driver main header file */ + +#ifndef _IGBVF_H_ +#define _IGBVF_H_ + +#include +#include +#include +#include + + +#include "vf.h" + +/* Forward declarations */ +struct igbvf_info; +struct igbvf_adapter; + +/* Interrupt defines */ +#define IGBVF_START_ITR 648 /* ~6000 ints/sec */ + +/* Interrupt modes, as used by the IntMode paramter */ +#define IGBVF_INT_MODE_LEGACY 0 +#define IGBVF_INT_MODE_MSI 1 +#define IGBVF_INT_MODE_MSIX 2 + +/* Tx/Rx descriptor defines */ +#define IGBVF_DEFAULT_TXD 256 +#define IGBVF_MAX_TXD 4096 +#define IGBVF_MIN_TXD 80 + +#define IGBVF_DEFAULT_RXD 256 +#define IGBVF_MAX_RXD 4096 +#define IGBVF_MIN_RXD 80 + +#define IGBVF_MIN_ITR_USECS 10 /* 100000 irq/sec */ +#define IGBVF_MAX_ITR_USECS 10000 /* 100 irq/sec */ + +/* RX descriptor control thresholds. + * PTHRESH - MAC will consider prefetch if it has fewer than this number of + * descriptors available in its onboard memory. + * Setting this to 0 disables RX descriptor prefetch. + * HTHRESH - MAC will only prefetch if there are at least this many descriptors + * available in host memory. + * If PTHRESH is 0, this should also be 0. + * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back + * descriptors until either it has this many to write back, or the + * ITR timer expires. + */ +#define IGBVF_RX_PTHRESH 16 +#define IGBVF_RX_HTHRESH 8 +#define IGBVF_RX_WTHRESH 1 + +/* this is the size past which hardware will drop packets when setting LPE=0 */ +#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 + +#define IGBVF_FC_PAUSE_TIME 0x0680 /* 858 usec */ + +/* How many Tx Descriptors do we need to call netif_wake_queue ? */ +#define IGBVF_TX_QUEUE_WAKE 32 +/* How many Rx Buffers do we bundle into one write to the hardware ? */ +#define IGBVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */ + +#define AUTO_ALL_MODES 0 +#define IGBVF_EEPROM_APME 0x0400 + +#define IGBVF_MNG_VLAN_NONE (-1) + +/* Number of packet split data buffers (not including the header buffer) */ +#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1) + +enum igbvf_boards { + board_vf, +}; + +struct igbvf_queue_stats { + u64 packets; + u64 bytes; +}; + +/* + * wrappers around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer + */ +struct igbvf_buffer { + dma_addr_t dma; + struct sk_buff *skb; + union { + /* Tx */ + struct { + unsigned long time_stamp; + u16 length; + u16 next_to_watch; + }; + /* Rx */ + struct { + struct page *page; + u64 page_dma; + unsigned int page_offset; + }; + }; + struct page *page; +}; + +union igbvf_desc { + union e1000_adv_rx_desc rx_desc; + union e1000_adv_tx_desc tx_desc; + struct e1000_adv_tx_context_desc tx_context_desc; +}; + +struct igbvf_ring { + struct igbvf_adapter *adapter; /* backlink */ + union igbvf_desc *desc; /* pointer to ring memory */ + dma_addr_t dma; /* phys address of ring */ + unsigned int size; /* length of ring in bytes */ + unsigned int count; /* number of desc. in ring */ + + u16 next_to_use; + u16 next_to_clean; + + u16 head; + u16 tail; + + /* array of buffer information structs */ + struct igbvf_buffer *buffer_info; + struct napi_struct napi; + + char name[IFNAMSIZ + 5]; + u32 eims_value; + u32 itr_val; + u16 itr_register; + int set_itr; + + struct sk_buff *rx_skb_top; + + struct igbvf_queue_stats stats; +}; + +/* board specific private data structure */ +struct igbvf_adapter { + struct timer_list watchdog_timer; + struct timer_list blink_timer; + + struct work_struct reset_task; + struct work_struct watchdog_task; + + const struct igbvf_info *ei; + + struct vlan_group *vlgrp; + u32 bd_number; + u32 rx_buffer_len; + u32 polling_interval; + u16 mng_vlan_id; + u16 link_speed; + u16 link_duplex; + + spinlock_t tx_queue_lock; /* prevent concurrent tail updates */ + + /* track device up/down/testing state */ + unsigned long state; + + /* Interrupt Throttle Rate */ + u32 itr; + u32 itr_setting; + u16 tx_itr; + u16 rx_itr; + + /* + * Tx + */ + struct igbvf_ring *tx_ring /* One per active queue */ + ____cacheline_aligned_in_smp; + + unsigned long tx_queue_len; + unsigned int restart_queue; + u32 txd_cmd; + + bool detect_tx_hung; + u8 tx_timeout_factor; + + u32 tx_int_delay; + u32 tx_abs_int_delay; + + unsigned int total_tx_bytes; + unsigned int total_tx_packets; + unsigned int total_rx_bytes; + unsigned int total_rx_packets; + + /* Tx stats */ + u32 tx_timeout_count; + u32 tx_fifo_head; + u32 tx_head_addr; + u32 tx_fifo_size; + u32 tx_dma_failed; + + /* + * Rx + */ + struct igbvf_ring *rx_ring; + + u32 rx_int_delay; + u32 rx_abs_int_delay; + + /* Rx stats */ + u64 hw_csum_err; + u64 hw_csum_good; + u64 rx_hdr_split; + u32 alloc_rx_buff_failed; + u32 rx_dma_failed; + + unsigned int rx_ps_hdr_size; + u32 max_frame_size; + u32 min_frame_size; + + /* OS defined structs */ + struct net_device *netdev; + struct pci_dev *pdev; + struct net_device_stats net_stats; + spinlock_t stats_lock; /* prevent concurrent stats updates */ + + /* structs defined in e1000_hw.h */ + struct e1000_hw hw; + + /* The VF counters don't clear on read so we have to get a base + * count on driver start up and always subtract that base on + * on the first update, thus the flag.. + */ + struct e1000_vf_stats stats; + u64 zero_base; + + struct igbvf_ring test_tx_ring; + struct igbvf_ring test_rx_ring; + u32 test_icr; + + u32 msg_enable; + struct msix_entry *msix_entries; + int int_mode; + u32 eims_enable_mask; + u32 eims_other; + u32 int_counter0; + u32 int_counter1; + + u32 eeprom_wol; + u32 wol; + u32 pba; + + bool fc_autoneg; + + unsigned long led_status; + + unsigned int flags; +}; + +struct igbvf_info { + enum e1000_mac_type mac; + unsigned int flags; + u32 pba; + void (*init_ops)(struct e1000_hw *); + s32 (*get_variants)(struct igbvf_adapter *); +}; + +/* hardware capability, feature, and workaround flags */ +#define FLAG_HAS_HW_VLAN_FILTER (1 << 0) +#define FLAG_HAS_JUMBO_FRAMES (1 << 1) +#define FLAG_MSI_ENABLED (1 << 2) +#define FLAG_RX_CSUM_ENABLED (1 << 3) +#define FLAG_TSO_FORCE (1 << 4) + +#define IGBVF_RX_DESC_ADV(R, i) \ + (&((((R).desc))[i].rx_desc)) +#define IGBVF_TX_DESC_ADV(R, i) \ + (&((((R).desc))[i].tx_desc)) +#define IGBVF_TX_CTXTDESC_ADV(R, i) \ + (&((((R).desc))[i].tx_context_desc)) + +enum igbvf_state_t { + __IGBVF_TESTING, + __IGBVF_RESETTING, + __IGBVF_DOWN +}; + +enum latency_range { + lowest_latency = 0, + low_latency = 1, + bulk_latency = 2, + latency_invalid = 255 +}; + +extern char igbvf_driver_name[]; +extern const char igbvf_driver_version[]; + +extern void igbvf_check_options(struct igbvf_adapter *); +extern void igbvf_set_ethtool_ops(struct net_device *); + +extern int igbvf_up(struct igbvf_adapter *); +extern void igbvf_down(struct igbvf_adapter *); +extern void igbvf_reinit_locked(struct igbvf_adapter *); +extern void igbvf_reset(struct igbvf_adapter *); +extern int igbvf_setup_rx_resources(struct igbvf_adapter *, struct igbvf_ring *); +extern int igbvf_setup_tx_resources(struct igbvf_adapter *, struct igbvf_ring *); +extern void igbvf_free_rx_resources(struct igbvf_ring *); +extern void igbvf_free_tx_resources(struct igbvf_ring *); +extern void igbvf_update_stats(struct igbvf_adapter *); +extern void igbvf_set_interrupt_capability(struct igbvf_adapter *); +extern void igbvf_reset_interrupt_capability(struct igbvf_adapter *); + +extern unsigned int copybreak; + +#endif /* _IGBVF_H_ */ diff --git a/drivers/net/igbvf/mbx.c b/drivers/net/igbvf/mbx.c new file mode 100644 index 0000000..819a8ec --- /dev/null +++ b/drivers/net/igbvf/mbx.c @@ -0,0 +1,350 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "mbx.h" + +/** + * e1000_poll_for_msg - Wait for message notification + * @hw: pointer to the HW structure + * + * returns SUCCESS if it successfully received a message notification + **/ +static s32 e1000_poll_for_msg(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + if (!mbx->ops.check_for_msg) + goto out; + + while (countdown && mbx->ops.check_for_msg(hw)) { + countdown--; + udelay(mbx->usec_delay); + } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; +out: + return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; +} + +/** + * e1000_poll_for_ack - Wait for message acknowledgement + * @hw: pointer to the HW structure + * + * returns SUCCESS if it successfully received a message acknowledgement + **/ +static s32 e1000_poll_for_ack(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + if (!mbx->ops.check_for_ack) + goto out; + + while (countdown && mbx->ops.check_for_ack(hw)) { + countdown--; + udelay(mbx->usec_delay); + } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; +out: + return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; +} + +/** + * e1000_read_posted_mbx - Wait for message notification and receive message + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * + * returns SUCCESS if it successfully received a message notification and + * copied it into the receive buffer. + **/ +static s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + if (!mbx->ops.read) + goto out; + + ret_val = e1000_poll_for_msg(hw); + + /* if ack received read message, otherwise we timed out */ + if (!ret_val) + ret_val = mbx->ops.read(hw, msg, size); +out: + return ret_val; +} + +/** + * e1000_write_posted_mbx - Write a message to the mailbox, wait for ack + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * + * returns SUCCESS if it successfully copied message into the buffer and + * received an ack to that message within delay * timeout period + **/ +static s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + /* exit if we either can't write or there isn't a defined timeout */ + if (!mbx->ops.write || !mbx->timeout) + goto out; + + /* send msg*/ + ret_val = mbx->ops.write(hw, msg, size); + + /* if msg sent wait until we receive an ack */ + if (!ret_val) + ret_val = e1000_poll_for_ack(hw); +out: + return ret_val; +} + +/** + * e1000_read_v2p_mailbox - read v2p mailbox + * @hw: pointer to the HW structure + * + * This function is used to read the v2p mailbox without losing the read to + * clear status bits. + **/ +static u32 e1000_read_v2p_mailbox(struct e1000_hw *hw) +{ + u32 v2p_mailbox = er32(V2PMAILBOX(0)); + + v2p_mailbox |= hw->dev_spec.vf.v2p_mailbox; + hw->dev_spec.vf.v2p_mailbox |= v2p_mailbox & E1000_V2PMAILBOX_R2C_BITS; + + return v2p_mailbox; +} + +/** + * e1000_check_for_bit_vf - Determine if a status bit was set + * @hw: pointer to the HW structure + * @mask: bitmask for bits to be tested and cleared + * + * This function is used to check for the read to clear bits within + * the V2P mailbox. + **/ +static s32 e1000_check_for_bit_vf(struct e1000_hw *hw, u32 mask) +{ + u32 v2p_mailbox = e1000_read_v2p_mailbox(hw); + s32 ret_val = -E1000_ERR_MBX; + + if (v2p_mailbox & mask) + ret_val = E1000_SUCCESS; + + hw->dev_spec.vf.v2p_mailbox &= ~mask; + + return ret_val; +} + +/** + * e1000_check_for_msg_vf - checks to see if the PF has sent mail + * @hw: pointer to the HW structure + * + * returns SUCCESS if the PF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_msg_vf(struct e1000_hw *hw) +{ + s32 ret_val = -E1000_ERR_MBX; + + if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFSTS)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.reqs++; + } + + return ret_val; +} + +/** + * e1000_check_for_ack_vf - checks to see if the PF has ACK'd + * @hw: pointer to the HW structure + * + * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX + **/ +static s32 e1000_check_for_ack_vf(struct e1000_hw *hw) +{ + s32 ret_val = -E1000_ERR_MBX; + + if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFACK)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.acks++; + } + + return ret_val; +} + +/** + * e1000_check_for_rst_vf - checks to see if the PF has reset + * @hw: pointer to the HW structure + * + * returns true if the PF has set the reset done bit or else false + **/ +static s32 e1000_check_for_rst_vf(struct e1000_hw *hw) +{ + s32 ret_val = -E1000_ERR_MBX; + + if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD | + E1000_V2PMAILBOX_RSTI))) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.rsts++; + } + + return ret_val; +} + +/** + * e1000_obtain_mbx_lock_vf - obtain mailbox lock + * @hw: pointer to the HW structure + * + * return SUCCESS if we obtained the mailbox lock + **/ +static s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw) +{ + s32 ret_val = -E1000_ERR_MBX; + + /* Take ownership of the buffer */ + ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_VFU); + + /* reserve mailbox for vf use */ + if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU) + ret_val = E1000_SUCCESS; + + return ret_val; +} + +/** + * e1000_write_mbx_vf - Write a message to the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +static s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size) +{ + s32 err; + u16 i; + + /* lock the mailbox to prevent pf/vf race condition */ + err = e1000_obtain_mbx_lock_vf(hw); + if (err) + goto out_no_write; + + /* flush any ack or msg as we are going to overwrite mailbox */ + e1000_check_for_ack_vf(hw); + e1000_check_for_msg_vf(hw); + + /* copy the caller specified message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + array_ew32(VMBMEM(0), i, msg[i]); + + /* update stats */ + hw->mbx.stats.msgs_tx++; + + /* Drop VFU and interrupt the PF to tell it a message has been sent */ + ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_REQ); + +out_no_write: + return err; +} + +/** + * e1000_read_mbx_vf - Reads a message from the inbox intended for vf + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * + * returns SUCCESS if it successfuly read message from buffer + **/ +static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size) +{ + s32 err; + u16 i; + + /* lock the mailbox to prevent pf/vf race condition */ + err = e1000_obtain_mbx_lock_vf(hw); + if (err) + goto out_no_read; + + /* copy the message from the mailbox memory buffer */ + for (i = 0; i < size; i++) + msg[i] = array_er32(VMBMEM(0), i); + + /* Acknowledge receipt and release mailbox, then we're done */ + ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_ACK); + + /* update stats */ + hw->mbx.stats.msgs_rx++; + +out_no_read: + return err; +} + +/** + * e1000_init_mbx_params_vf - set initial values for vf mailbox + * @hw: pointer to the HW structure + * + * Initializes the hw->mbx struct to correct values for vf mailbox + */ +s32 e1000_init_mbx_params_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + + /* start mailbox as timed out and let the reset_hw call set the timeout + * value to being communications */ + mbx->timeout = 0; + mbx->usec_delay = E1000_VF_MBX_INIT_DELAY; + + mbx->size = E1000_VFMAILBOX_SIZE; + + mbx->ops.read = e1000_read_mbx_vf; + mbx->ops.write = e1000_write_mbx_vf; + mbx->ops.read_posted = e1000_read_posted_mbx; + mbx->ops.write_posted = e1000_write_posted_mbx; + mbx->ops.check_for_msg = e1000_check_for_msg_vf; + mbx->ops.check_for_ack = e1000_check_for_ack_vf; + mbx->ops.check_for_rst = e1000_check_for_rst_vf; + + mbx->stats.msgs_tx = 0; + mbx->stats.msgs_rx = 0; + mbx->stats.reqs = 0; + mbx->stats.acks = 0; + mbx->stats.rsts = 0; + + return E1000_SUCCESS; +} + diff --git a/drivers/net/igbvf/mbx.h b/drivers/net/igbvf/mbx.h new file mode 100644 index 0000000..4938609 --- /dev/null +++ b/drivers/net/igbvf/mbx.h @@ -0,0 +1,75 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 1999 - 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_MBX_H_ +#define _E1000_MBX_H_ + +#include "vf.h" + +#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */ +#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */ +#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */ +#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */ +#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */ +#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */ +#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */ + +#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ + +/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the + * PF. The reverse is true if it is E1000_PF_*. + * Message ACK's are the value or'd with 0xF0000000 + */ +#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with + * this are the ACK */ +#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with + * this are the NACK */ +#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still + clear to send requests */ + +/* We have a total wait time of 1s for vf mailbox posted messages */ +#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mailbox timeout */ +#define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */ + +#define E1000_VT_MSGINFO_SHIFT 16 +/* bits 23:16 are used for exra info for certain messages */ +#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) + +#define E1000_VF_RESET 0x01 /* VF requests reset */ +#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */ +#define E1000_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */ +#define E1000_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */ +#define E1000_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */ + +#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */ + +void e1000_init_mbx_ops_generic(struct e1000_hw *hw); +s32 e1000_init_mbx_params_vf(struct e1000_hw *); + +#endif /* _E1000_MBX_H_ */ diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c new file mode 100644 index 0000000..c564842 --- /dev/null +++ b/drivers/net/igbvf/netdev.c @@ -0,0 +1,2919 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "igbvf.h" + +#define DRV_VERSION "1.0.0-k0" +char igbvf_driver_name[] = "igbvf"; +const char igbvf_driver_version[] = DRV_VERSION; +static const char igbvf_driver_string[] = + "Intel(R) Virtual Function Network Driver"; +static const char igbvf_copyright[] = "Copyright (c) 2009 Intel Corporation."; + +static int igbvf_poll(struct napi_struct *napi, int budget); + +static struct igbvf_info igbvf_vf_info = { + .mac = e1000_vfadapt, + .flags = FLAG_HAS_JUMBO_FRAMES + | FLAG_RX_CSUM_ENABLED, + .pba = 10, + .init_ops = e1000_init_function_pointers_vf, +}; + +static const struct igbvf_info *igbvf_info_tbl[] = { + [board_vf] = &igbvf_vf_info, +}; + +/** + * igbvf_desc_unused - calculate if we have unused descriptors + **/ +static int igbvf_desc_unused(struct igbvf_ring *ring) +{ + if (ring->next_to_clean > ring->next_to_use) + return ring->next_to_clean - ring->next_to_use - 1; + + return ring->count + ring->next_to_clean - ring->next_to_use - 1; +} + +/** + * igbvf_receive_skb - helper function to handle Rx indications + * @adapter: board private structure + * @status: descriptor status field as written by hardware + * @vlan: descriptor vlan field as written by hardware (no le/be conversion) + * @skb: pointer to sk_buff to be indicated to stack + **/ +static void igbvf_receive_skb(struct igbvf_adapter *adapter, + struct net_device *netdev, + struct sk_buff *skb, + u32 status, u16 vlan) +{ + if (adapter->vlgrp && (status & E1000_RXD_STAT_VP)) + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, + le16_to_cpu(vlan) & + E1000_RXD_SPC_VLAN_MASK); + else + netif_receive_skb(skb); + + netdev->last_rx = jiffies; +} + +static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter, + u32 status_err, struct sk_buff *skb) +{ + skb->ip_summed = CHECKSUM_NONE; + + /* Ignore Checksum bit is set or checksum is disabled through ethtool */ + if ((status_err & E1000_RXD_STAT_IXSM)) + return; + /* TCP/UDP checksum error bit is set */ + if (status_err & + (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) { + /* let the stack verify checksum errors */ + adapter->hw_csum_err++; + return; + } + /* It must be a TCP or UDP packet with a valid checksum */ + if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)) + skb->ip_summed = CHECKSUM_UNNECESSARY; + + adapter->hw_csum_good++; +} + +/** + * igbvf_alloc_rx_buffers - Replace used receive buffers; packet split + * @rx_ring: address of ring structure to repopulate + * @cleaned_count: number of buffers to repopulate + **/ +static void igbvf_alloc_rx_buffers(struct igbvf_ring *rx_ring, + int cleaned_count) +{ + struct igbvf_adapter *adapter = rx_ring->adapter; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union e1000_adv_rx_desc *rx_desc; + struct igbvf_buffer *buffer_info; + struct sk_buff *skb; + unsigned int i; + int bufsz; + + i = rx_ring->next_to_use; + buffer_info = &rx_ring->buffer_info[i]; + + if (adapter->rx_ps_hdr_size) + bufsz = adapter->rx_ps_hdr_size; + else + bufsz = adapter->rx_buffer_len; + bufsz += NET_IP_ALIGN; + + while (cleaned_count--) { + rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i); + + if (adapter->rx_ps_hdr_size && !buffer_info->page_dma) { + if (!buffer_info->page) { + buffer_info->page = alloc_page(GFP_ATOMIC); + if (!buffer_info->page) { + adapter->alloc_rx_buff_failed++; + goto no_buffers; + } + buffer_info->page_offset = 0; + } else { + buffer_info->page_offset ^= PAGE_SIZE / 2; + } + buffer_info->page_dma = + pci_map_page(pdev, buffer_info->page, + buffer_info->page_offset, + PAGE_SIZE / 2, + PCI_DMA_FROMDEVICE); + } + + if (!buffer_info->skb) { + skb = netdev_alloc_skb(netdev, bufsz); + if (!skb) { + adapter->alloc_rx_buff_failed++; + goto no_buffers; + } + + /* Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + skb_reserve(skb, NET_IP_ALIGN); + + buffer_info->skb = skb; + buffer_info->dma = pci_map_single(pdev, skb->data, + bufsz, + PCI_DMA_FROMDEVICE); + } + /* Refresh the desc even if buffer_addrs didn't change because + * each write-back erases this info. */ + if (adapter->rx_ps_hdr_size) { + rx_desc->read.pkt_addr = + cpu_to_le64(buffer_info->page_dma); + rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma); + } else { + rx_desc->read.pkt_addr = + cpu_to_le64(buffer_info->dma); + rx_desc->read.hdr_addr = 0; + } + + i++; + if (i == rx_ring->count) + i = 0; + buffer_info = &rx_ring->buffer_info[i]; + } + +no_buffers: + if (rx_ring->next_to_use != i) { + rx_ring->next_to_use = i; + if (i == 0) + i = (rx_ring->count - 1); + else + i--; + + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + writel(i, adapter->hw.hw_addr + rx_ring->tail); + } +} + +/** + * igbvf_clean_rx_irq - Send received data up the network stack; legacy + * @adapter: board private structure + * + * the return value indicates whether actual cleaning was done, there + * is no guarantee that everything was cleaned + **/ +static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter, + int *work_done, int work_to_do) +{ + struct igbvf_ring *rx_ring = adapter->rx_ring; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union e1000_adv_rx_desc *rx_desc, *next_rxd; + struct igbvf_buffer *buffer_info, *next_buffer; + struct sk_buff *skb; + bool cleaned = false; + int cleaned_count = 0; + unsigned int total_bytes = 0, total_packets = 0; + unsigned int i; + u32 length, hlen, staterr; + + i = rx_ring->next_to_clean; + rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i); + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + + while (staterr & E1000_RXD_STAT_DD) { + if (*work_done >= work_to_do) + break; + (*work_done)++; + + buffer_info = &rx_ring->buffer_info[i]; + + /* HW will not DMA in data larger than the given buffer, even + * if it parses the (NFS, of course) header to be larger. In + * that case, it fills the header buffer and spills the rest + * into the page. + */ + hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info) & + E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT; + if (hlen > adapter->rx_ps_hdr_size) + hlen = adapter->rx_ps_hdr_size; + + length = le16_to_cpu(rx_desc->wb.upper.length); + cleaned = true; + cleaned_count++; + + skb = buffer_info->skb; + prefetch(skb->data - NET_IP_ALIGN); + buffer_info->skb = NULL; + if (!adapter->rx_ps_hdr_size) { + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_buffer_len, + PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; + skb_put(skb, length); + goto send_up; + } + + if (!skb_shinfo(skb)->nr_frags) { + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_ps_hdr_size + NET_IP_ALIGN, + PCI_DMA_FROMDEVICE); + skb_put(skb, hlen); + } + + if (length) { + pci_unmap_page(pdev, buffer_info->page_dma, + PAGE_SIZE / 2, + PCI_DMA_FROMDEVICE); + buffer_info->page_dma = 0; + + skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags++, + buffer_info->page, + buffer_info->page_offset, + length); + + if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) || + (page_count(buffer_info->page) != 1)) + buffer_info->page = NULL; + else + get_page(buffer_info->page); + + skb->len += length; + skb->data_len += length; + skb->truesize += length; + } +send_up: + i++; + if (i == rx_ring->count) + i = 0; + next_rxd = IGBVF_RX_DESC_ADV(*rx_ring, i); + prefetch(next_rxd); + next_buffer = &rx_ring->buffer_info[i]; + + if (!(staterr & E1000_RXD_STAT_EOP)) { + buffer_info->skb = next_buffer->skb; + buffer_info->dma = next_buffer->dma; + next_buffer->skb = skb; + next_buffer->dma = 0; + goto next_desc; + } + + if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { + dev_kfree_skb_irq(skb); + goto next_desc; + } + + total_bytes += skb->len; + total_packets++; + + igbvf_rx_checksum_adv(adapter, staterr, skb); + + skb->protocol = eth_type_trans(skb, netdev); + + igbvf_receive_skb(adapter, netdev, skb, staterr, + rx_desc->wb.upper.vlan); + + netdev->last_rx = jiffies; + +next_desc: + rx_desc->wb.upper.status_error = 0; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= IGBVF_RX_BUFFER_WRITE) { + igbvf_alloc_rx_buffers(rx_ring, cleaned_count); + cleaned_count = 0; + } + + /* use prefetched values */ + rx_desc = next_rxd; + buffer_info = next_buffer; + + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + } + + rx_ring->next_to_clean = i; + cleaned_count = igbvf_desc_unused(rx_ring); + + if (cleaned_count) + igbvf_alloc_rx_buffers(rx_ring, cleaned_count); + + adapter->total_rx_packets += total_packets; + adapter->total_rx_bytes += total_bytes; + adapter->net_stats.rx_bytes += total_bytes; + adapter->net_stats.rx_packets += total_packets; + return cleaned; +} + +static void igbvf_put_txbuf(struct igbvf_adapter *adapter, + struct igbvf_buffer *buffer_info) +{ + buffer_info->dma = 0; + if (buffer_info->skb) { + skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb, + DMA_TO_DEVICE); + dev_kfree_skb_any(buffer_info->skb); + buffer_info->skb = NULL; + } + buffer_info->time_stamp = 0; +} + +static void igbvf_print_tx_hang(struct igbvf_adapter *adapter) +{ + struct igbvf_ring *tx_ring = adapter->tx_ring; + unsigned int i = tx_ring->next_to_clean; + unsigned int eop = tx_ring->buffer_info[i].next_to_watch; + union e1000_adv_tx_desc *eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop); + + /* detected Tx unit hang */ + dev_err(&adapter->pdev->dev, + "Detected Tx Unit Hang:\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]:\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + readl(adapter->hw.hw_addr + tx_ring->head), + readl(adapter->hw.hw_addr + tx_ring->tail), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_ring->buffer_info[eop].time_stamp, + eop, + jiffies, + eop_desc->wb.status); +} + +/** + * igbvf_setup_tx_resources - allocate Tx resources (Descriptors) + * @adapter: board private structure + * + * Return 0 on success, negative on failure + **/ +int igbvf_setup_tx_resources(struct igbvf_adapter *adapter, + struct igbvf_ring *tx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + int size; + + size = sizeof(struct igbvf_buffer) * tx_ring->count; + tx_ring->buffer_info = vmalloc(size); + if (!tx_ring->buffer_info) + goto err; + memset(tx_ring->buffer_info, 0, size); + + /* round up to nearest 4K */ + tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc); + tx_ring->size = ALIGN(tx_ring->size, 4096); + + tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size, + &tx_ring->dma); + + if (!tx_ring->desc) + goto err; + + tx_ring->adapter = adapter; + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + return 0; +err: + vfree(tx_ring->buffer_info); + dev_err(&adapter->pdev->dev, + "Unable to allocate memory for the transmit descriptor ring\n"); + return -ENOMEM; +} + +/** + * igbvf_setup_rx_resources - allocate Rx resources (Descriptors) + * @adapter: board private structure + * + * Returns 0 on success, negative on failure + **/ +int igbvf_setup_rx_resources(struct igbvf_adapter *adapter, + struct igbvf_ring *rx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + int size, desc_len; + + size = sizeof(struct igbvf_buffer) * rx_ring->count; + rx_ring->buffer_info = vmalloc(size); + if (!rx_ring->buffer_info) + goto err; + memset(rx_ring->buffer_info, 0, size); + + desc_len = sizeof(union e1000_adv_rx_desc); + + /* Round up to nearest 4K */ + rx_ring->size = rx_ring->count * desc_len; + rx_ring->size = ALIGN(rx_ring->size, 4096); + + rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size, + &rx_ring->dma); + + if (!rx_ring->desc) + goto err; + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + + rx_ring->adapter = adapter; + + return 0; + +err: + vfree(rx_ring->buffer_info); + rx_ring->buffer_info = NULL; + dev_err(&adapter->pdev->dev, + "Unable to allocate memory for the receive descriptor ring\n"); + return -ENOMEM; +} + +/** + * igbvf_clean_tx_ring - Free Tx Buffers + * @tx_ring: ring to be cleaned + **/ +static void igbvf_clean_tx_ring(struct igbvf_ring *tx_ring) +{ + struct igbvf_adapter *adapter = tx_ring->adapter; + struct igbvf_buffer *buffer_info; + unsigned long size; + unsigned int i; + + if (!tx_ring->buffer_info) + return; + + /* Free all the Tx ring sk_buffs */ + for (i = 0; i < tx_ring->count; i++) { + buffer_info = &tx_ring->buffer_info[i]; + igbvf_put_txbuf(adapter, buffer_info); + } + + size = sizeof(struct igbvf_buffer) * tx_ring->count; + memset(tx_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + writel(0, adapter->hw.hw_addr + tx_ring->head); + writel(0, adapter->hw.hw_addr + tx_ring->tail); +} + +/** + * igbvf_free_tx_resources - Free Tx Resources per Queue + * @tx_ring: ring to free resources from + * + * Free all transmit software resources + **/ +void igbvf_free_tx_resources(struct igbvf_ring *tx_ring) +{ + struct pci_dev *pdev = tx_ring->adapter->pdev; + + igbvf_clean_tx_ring(tx_ring); + + vfree(tx_ring->buffer_info); + tx_ring->buffer_info = NULL; + + pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma); + + tx_ring->desc = NULL; +} + +/** + * igbvf_clean_rx_ring - Free Rx Buffers per Queue + * @adapter: board private structure + **/ +static void igbvf_clean_rx_ring(struct igbvf_ring *rx_ring) +{ + struct igbvf_adapter *adapter = rx_ring->adapter; + struct igbvf_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + if (!rx_ring->buffer_info) + return; + + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + if (buffer_info->dma) { + if (adapter->rx_ps_hdr_size){ + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_ps_hdr_size, + PCI_DMA_FROMDEVICE); + } else { + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_buffer_len, + PCI_DMA_FROMDEVICE); + } + buffer_info->dma = 0; + } + + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; + } + + if (buffer_info->page) { + if (buffer_info->page_dma) + pci_unmap_page(pdev, buffer_info->page_dma, + PAGE_SIZE / 2, + PCI_DMA_FROMDEVICE); + put_page(buffer_info->page); + buffer_info->page = NULL; + buffer_info->page_dma = 0; + buffer_info->page_offset = 0; + } + } + + size = sizeof(struct igbvf_buffer) * rx_ring->count; + memset(rx_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + + writel(0, adapter->hw.hw_addr + rx_ring->head); + writel(0, adapter->hw.hw_addr + rx_ring->tail); +} + +/** + * igbvf_free_rx_resources - Free Rx Resources + * @rx_ring: ring to clean the resources from + * + * Free all receive software resources + **/ + +void igbvf_free_rx_resources(struct igbvf_ring *rx_ring) +{ + struct pci_dev *pdev = rx_ring->adapter->pdev; + + igbvf_clean_rx_ring(rx_ring); + + vfree(rx_ring->buffer_info); + rx_ring->buffer_info = NULL; + + dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, + rx_ring->dma); + rx_ring->desc = NULL; +} + +/** + * igbvf_update_itr - update the dynamic ITR value based on statistics + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + * + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. This functionality is controlled + * by the InterruptThrottleRate module parameter. + **/ +static unsigned int igbvf_update_itr(struct igbvf_adapter *adapter, + u16 itr_setting, int packets, + int bytes) +{ + unsigned int retval = itr_setting; + + if (packets == 0) + goto update_itr_done; + + switch (itr_setting) { + case lowest_latency: + /* handle TSO and jumbo frames */ + if (bytes/packets > 8000) + retval = bulk_latency; + else if ((packets < 5) && (bytes > 512)) + retval = low_latency; + break; + case low_latency: /* 50 usec aka 20000 ints/s */ + if (bytes > 10000) { + /* this if handles the TSO accounting */ + if (bytes/packets > 8000) + retval = bulk_latency; + else if ((packets < 10) || ((bytes/packets) > 1200)) + retval = bulk_latency; + else if ((packets > 35)) + retval = lowest_latency; + } else if (bytes/packets > 2000) { + retval = bulk_latency; + } else if (packets <= 2 && bytes < 512) { + retval = lowest_latency; + } + break; + case bulk_latency: /* 250 usec aka 4000 ints/s */ + if (bytes > 25000) { + if (packets > 35) + retval = low_latency; + } else if (bytes < 6000) { + retval = low_latency; + } + break; + } + +update_itr_done: + return retval; +} + +static void igbvf_set_itr(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 current_itr; + u32 new_itr = adapter->itr; + + adapter->tx_itr = igbvf_update_itr(adapter, adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) + adapter->tx_itr = low_latency; + + adapter->rx_itr = igbvf_update_itr(adapter, adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) + adapter->rx_itr = low_latency; + + current_itr = max(adapter->rx_itr, adapter->tx_itr); + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = 70000; + break; + case low_latency: + new_itr = 20000; /* aka hwitr = ~200 */ + break; + case bulk_latency: + new_itr = 4000; + break; + default: + break; + } + + if (new_itr != adapter->itr) { + /* + * this attempts to bias the interrupt rate towards Bulk + * by adding intermediate steps when interrupt rate is + * increasing + */ + new_itr = new_itr > adapter->itr ? + min(adapter->itr + (new_itr >> 2), new_itr) : + new_itr; + adapter->itr = new_itr; + adapter->rx_ring->itr_val = 1952; + + if (adapter->msix_entries) + adapter->rx_ring->set_itr = 1; + else + ew32(ITR, 1952); + } +} + +/** + * igbvf_clean_tx_irq - Reclaim resources after transmit completes + * @adapter: board private structure + * returns true if ring is completely cleaned + **/ +static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring) +{ + struct igbvf_adapter *adapter = tx_ring->adapter; + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct igbvf_buffer *buffer_info; + struct sk_buff *skb; + union e1000_adv_tx_desc *tx_desc, *eop_desc; + unsigned int total_bytes = 0, total_packets = 0; + unsigned int i, eop, count = 0; + bool cleaned = false; + + i = tx_ring->next_to_clean; + eop = tx_ring->buffer_info[i].next_to_watch; + eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop); + + while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) && + (count < tx_ring->count)) { + for (cleaned = false; !cleaned; count++) { + tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i); + buffer_info = &tx_ring->buffer_info[i]; + cleaned = (i == eop); + skb = buffer_info->skb; + + if (skb) { + unsigned int segs, bytecount; + + /* gso_segs is currently only valid for tcp */ + segs = skb_shinfo(skb)->gso_segs ?: 1; + /* multiply data chunks by size of headers */ + bytecount = ((segs - 1) * skb_headlen(skb)) + + skb->len; + total_packets += segs; + total_bytes += bytecount; + } + + igbvf_put_txbuf(adapter, buffer_info); + tx_desc->wb.status = 0; + + i++; + if (i == tx_ring->count) + i = 0; + } + eop = tx_ring->buffer_info[i].next_to_watch; + eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop); + } + + tx_ring->next_to_clean = i; + + if (unlikely(count && + netif_carrier_ok(netdev) && + igbvf_desc_unused(tx_ring) >= IGBVF_TX_QUEUE_WAKE)) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + if (netif_queue_stopped(netdev) && + !(test_bit(__IGBVF_DOWN, &adapter->state))) { + netif_wake_queue(netdev); + ++adapter->restart_queue; + } + } + + if (adapter->detect_tx_hung) { + /* Detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i */ + adapter->detect_tx_hung = false; + if (tx_ring->buffer_info[i].time_stamp && + time_after(jiffies, tx_ring->buffer_info[i].time_stamp + + (adapter->tx_timeout_factor * HZ)) + && !(er32(STATUS) & E1000_STATUS_TXOFF)) { + + tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i); + /* detected Tx unit hang */ + igbvf_print_tx_hang(adapter); + + netif_stop_queue(netdev); + } + } + adapter->net_stats.tx_bytes += total_bytes; + adapter->net_stats.tx_packets += total_packets; + return (count < tx_ring->count); +} + +static irqreturn_t igbvf_msix_other(int irq, void *data) +{ + struct net_device *netdev = data; + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + adapter->int_counter1++; + + netif_carrier_off(netdev); + hw->mac.get_link_status = 1; + if (!test_bit(__IGBVF_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + + ew32(EIMS, adapter->eims_other); + + return IRQ_HANDLED; +} + +static irqreturn_t igbvf_intr_msix_tx(int irq, void *data) +{ + struct net_device *netdev = data; + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct igbvf_ring *tx_ring = adapter->tx_ring; + + + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + + /* auto mask will automatically reenable the interrupt when we write + * EICS */ + if (!igbvf_clean_tx_irq(tx_ring)) + /* Ring was not completely cleaned, so fire another interrupt */ + ew32(EICS, tx_ring->eims_value); + else + ew32(EIMS, tx_ring->eims_value); + + return IRQ_HANDLED; +} + +static irqreturn_t igbvf_intr_msix_rx(int irq, void *data) +{ + struct net_device *netdev = data; + struct igbvf_adapter *adapter = netdev_priv(netdev); + + adapter->int_counter0++; + + /* Write the ITR value calculated at the end of the + * previous interrupt. + */ + if (adapter->rx_ring->set_itr) { + writel(adapter->rx_ring->itr_val, + adapter->hw.hw_addr + adapter->rx_ring->itr_register); + adapter->rx_ring->set_itr = 0; + } + + if (napi_schedule_prep(&adapter->rx_ring->napi)) { + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; + __napi_schedule(&adapter->rx_ring->napi); + } + + return IRQ_HANDLED; +} + +#define IGBVF_NO_QUEUE -1 + +static void igbvf_assign_vector(struct igbvf_adapter *adapter, int rx_queue, + int tx_queue, int msix_vector) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ivar, index; + + /* 82576 uses a table-based method for assigning vectors. + Each queue has a single entry in the table to which we write + a vector number along with a "valid" bit. Sadly, the layout + of the table is somewhat counterintuitive. */ + if (rx_queue > IGBVF_NO_QUEUE) { + index = (rx_queue >> 1); + ivar = array_er32(IVAR0, index); + if (rx_queue & 0x1) { + /* vector goes into third byte of register */ + ivar = ivar & 0xFF00FFFF; + ivar |= (msix_vector | E1000_IVAR_VALID) << 16; + } else { + /* vector goes into low byte of register */ + ivar = ivar & 0xFFFFFF00; + ivar |= msix_vector | E1000_IVAR_VALID; + } + adapter->rx_ring[rx_queue].eims_value = 1 << msix_vector; + array_ew32(IVAR0, index, ivar); + } + if (tx_queue > IGBVF_NO_QUEUE) { + index = (tx_queue >> 1); + ivar = array_er32(IVAR0, index); + if (tx_queue & 0x1) { + /* vector goes into high byte of register */ + ivar = ivar & 0x00FFFFFF; + ivar |= (msix_vector | E1000_IVAR_VALID) << 24; + } else { + /* vector goes into second byte of register */ + ivar = ivar & 0xFFFF00FF; + ivar |= (msix_vector | E1000_IVAR_VALID) << 8; + } + adapter->tx_ring[tx_queue].eims_value = 1 << msix_vector; + array_ew32(IVAR0, index, ivar); + } +} + +/** + * igbvf_configure_msix - Configure MSI-X hardware + * + * igbvf_configure_msix sets up the hardware to properly + * generate MSI-X interrupts. + **/ +static void igbvf_configure_msix(struct igbvf_adapter *adapter) +{ + u32 tmp; + struct e1000_hw *hw = &adapter->hw; + struct igbvf_ring *tx_ring = adapter->tx_ring; + struct igbvf_ring *rx_ring = adapter->rx_ring; + int vector = 0; + + adapter->eims_enable_mask = 0; + + igbvf_assign_vector(adapter, IGBVF_NO_QUEUE, 0, vector++); + adapter->eims_enable_mask |= tx_ring->eims_value; + if (tx_ring->itr_val) + writel(tx_ring->itr_val, + hw->hw_addr + tx_ring->itr_register); + else + writel(1952, hw->hw_addr + tx_ring->itr_register); + + igbvf_assign_vector(adapter, 0, IGBVF_NO_QUEUE, vector++); + adapter->eims_enable_mask |= rx_ring->eims_value; + if (rx_ring->itr_val) + writel(rx_ring->itr_val, + hw->hw_addr + rx_ring->itr_register); + else + writel(1952, hw->hw_addr + rx_ring->itr_register); + + /* set vector for other causes, i.e. link changes */ + + tmp = (vector++ | E1000_IVAR_VALID); + + ew32(IVAR_MISC, tmp); + + adapter->eims_enable_mask = (1 << (vector)) - 1; + adapter->eims_other = 1 << (vector - 1); + e1e_flush(); +} + +void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter) +{ + if (adapter->msix_entries) { + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } +} + +/** + * igbvf_set_interrupt_capability - set MSI or MSI-X if supported + * + * Attempt to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter) +{ + int err = -ENOMEM; + int i; + + /* we allocate 3 vectors, 1 for tx, 1 for rx, one for pf messages */ + adapter->msix_entries = kcalloc(3, sizeof(struct msix_entry), + GFP_KERNEL); + if (adapter->msix_entries) { + for (i = 0; i < 3; i++) + adapter->msix_entries[i].entry = i; + + err = pci_enable_msix(adapter->pdev, + adapter->msix_entries, 3); + } + + if (err) { + /* MSI-X failed */ + dev_err(&adapter->pdev->dev, + "Failed to initialize MSI-X interrupts.\n"); + igbvf_reset_interrupt_capability(adapter); + } +} + +/** + * igbvf_request_msix - Initialize MSI-X interrupts + * + * igbvf_request_msix allocates MSI-X vectors and requests interrupts from the + * kernel. + **/ +static int igbvf_request_msix(struct igbvf_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err = 0, vector = 0; + + if (strlen(netdev->name) < (IFNAMSIZ - 5)) { + sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name); + sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name); + } else { + memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ); + memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ); + } + + err = request_irq(adapter->msix_entries[vector].vector, + &igbvf_intr_msix_tx, 0, adapter->tx_ring->name, + netdev); + if (err) + goto out; + + adapter->tx_ring->itr_register = E1000_EITR(vector); + adapter->tx_ring->itr_val = 1952; + vector++; + + err = request_irq(adapter->msix_entries[vector].vector, + &igbvf_intr_msix_rx, 0, adapter->rx_ring->name, + netdev); + if (err) + goto out; + + adapter->rx_ring->itr_register = E1000_EITR(vector); + adapter->rx_ring->itr_val = 1952; + vector++; + + err = request_irq(adapter->msix_entries[vector].vector, + &igbvf_msix_other, 0, netdev->name, netdev); + if (err) + goto out; + + igbvf_configure_msix(adapter); + return 0; +out: + return err; +} + +/** + * igbvf_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + **/ +static int __devinit igbvf_alloc_queues(struct igbvf_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + adapter->tx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL); + if (!adapter->tx_ring) + return -ENOMEM; + + adapter->rx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL); + if (!adapter->rx_ring) { + kfree(adapter->tx_ring); + return -ENOMEM; + } + + netif_napi_add(netdev, &adapter->rx_ring->napi, igbvf_poll, 64); + + return 0; +} + +/** + * igbvf_request_irq - initialize interrupts + * + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static int igbvf_request_irq(struct igbvf_adapter *adapter) +{ + int err = -1; + + /* igbvf supports msi-x only */ + if (adapter->msix_entries) + err = igbvf_request_msix(adapter); + + if (!err) + return err; + + dev_err(&adapter->pdev->dev, + "Unable to allocate interrupt, Error: %d\n", err); + + return err; +} + +static void igbvf_free_irq(struct igbvf_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int vector; + + if (adapter->msix_entries) { + for (vector = 0; vector < 3; vector++) + free_irq(adapter->msix_entries[vector].vector, netdev); + } +} + +/** + * igbvf_irq_disable - Mask off interrupt generation on the NIC + **/ +static void igbvf_irq_disable(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + ew32(EIMC, ~0); + + if (adapter->msix_entries) + ew32(EIAC, 0); +} + +/** + * igbvf_irq_enable - Enable default interrupt generation settings + **/ +static void igbvf_irq_enable(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + ew32(EIAC, adapter->eims_enable_mask); + ew32(EIAM, adapter->eims_enable_mask); + ew32(EIMS, adapter->eims_enable_mask); +} + +/** + * igbvf_poll - NAPI Rx polling callback + * @napi: struct associated with this polling callback + * @budget: amount of packets driver is allowed to process this poll + **/ +static int igbvf_poll(struct napi_struct *napi, int budget) +{ + struct igbvf_ring *rx_ring = container_of(napi, struct igbvf_ring, napi); + struct igbvf_adapter *adapter = rx_ring->adapter; + struct e1000_hw *hw = &adapter->hw; + int work_done = 0; + + igbvf_clean_rx_irq(adapter, &work_done, budget); + + /* If not enough Rx work done, exit the polling mode */ + if (work_done < budget) { + napi_complete(napi); + + if (adapter->itr_setting & 3) + igbvf_set_itr(adapter); + + if (!test_bit(__IGBVF_DOWN, &adapter->state)) + ew32(EIMS, adapter->rx_ring->eims_value); + } + + return work_done; +} + +/** + * igbvf_set_rlpml - set receive large packet maximum length + * @adapter: board private structure + * + * Configure the maximum size of packets that will be received + */ +static void igbvf_set_rlpml(struct igbvf_adapter *adapter) +{ + int max_frame_size = adapter->max_frame_size; + struct e1000_hw *hw = &adapter->hw; + + if (adapter->vlgrp) + max_frame_size += VLAN_TAG_SIZE; + + e1000_rlpml_set_vf(hw, max_frame_size); +} + +static void igbvf_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (hw->mac.ops.set_vfta(hw, vid, true)) + dev_err(&adapter->pdev->dev, "Failed to add vlan id %d\n", vid); +} + +static void igbvf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + igbvf_irq_disable(adapter); + vlan_group_set_device(adapter->vlgrp, vid, NULL); + + if (!test_bit(__IGBVF_DOWN, &adapter->state)) + igbvf_irq_enable(adapter); + + if (hw->mac.ops.set_vfta(hw, vid, false)) + dev_err(&adapter->pdev->dev, + "Failed to remove vlan id %d\n", vid); +} + +static void igbvf_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + + adapter->vlgrp = grp; +} + +static void igbvf_restore_vlan(struct igbvf_adapter *adapter) +{ + u16 vid; + + if (!adapter->vlgrp) + return; + + for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { + if (!vlan_group_get_device(adapter->vlgrp, vid)) + continue; + igbvf_vlan_rx_add_vid(adapter->netdev, vid); + } + + igbvf_set_rlpml(adapter); +} + +/** + * igbvf_configure_tx - Configure Transmit Unit after Reset + * @adapter: board private structure + * + * Configure the Tx unit of the MAC after a reset. + **/ +static void igbvf_configure_tx(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct igbvf_ring *tx_ring = adapter->tx_ring; + u64 tdba; + u32 txdctl, dca_txctrl; + + /* disable transmits */ + txdctl = er32(TXDCTL(0)); + ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE); + msleep(10); + + /* Setup the HW Tx Head and Tail descriptor pointers */ + ew32(TDLEN(0), tx_ring->count * sizeof(union e1000_adv_tx_desc)); + tdba = tx_ring->dma; + ew32(TDBAL(0), (tdba & DMA_32BIT_MASK)); + ew32(TDBAH(0), (tdba >> 32)); + ew32(TDH(0), 0); + ew32(TDT(0), 0); + tx_ring->head = E1000_TDH(0); + tx_ring->tail = E1000_TDT(0); + + /* Turn off Relaxed Ordering on head write-backs. The writebacks + * MUST be delivered in order or it will completely screw up + * our bookeeping. + */ + dca_txctrl = er32(DCA_TXCTRL(0)); + dca_txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN; + ew32(DCA_TXCTRL(0), dca_txctrl); + + /* enable transmits */ + txdctl |= E1000_TXDCTL_QUEUE_ENABLE; + ew32(TXDCTL(0), txdctl); + + /* Setup Transmit Descriptor Settings for eop descriptor */ + adapter->txd_cmd = E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_IFCS; + + /* enable Report Status bit */ + adapter->txd_cmd |= E1000_ADVTXD_DCMD_RS; + + adapter->tx_queue_len = adapter->netdev->tx_queue_len; +} + +/** + * igbvf_setup_srrctl - configure the receive control registers + * @adapter: Board private structure + **/ +static void igbvf_setup_srrctl(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 srrctl = 0; + + srrctl &= ~(E1000_SRRCTL_DESCTYPE_MASK | + E1000_SRRCTL_BSIZEHDR_MASK | + E1000_SRRCTL_BSIZEPKT_MASK); + + /* Enable queue drop to avoid head of line blocking */ + srrctl |= E1000_SRRCTL_DROP_EN; + + /* Setup buffer sizes */ + srrctl |= ALIGN(adapter->rx_buffer_len, 1024) >> + E1000_SRRCTL_BSIZEPKT_SHIFT; + + if (adapter->rx_buffer_len < 2048) { + adapter->rx_ps_hdr_size = 0; + srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF; + } else { + adapter->rx_ps_hdr_size = 128; + srrctl |= adapter->rx_ps_hdr_size << + E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; + srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; + } + + ew32(SRRCTL(0), srrctl); +} + +/** + * igbvf_configure_rx - Configure Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Rx unit of the MAC after a reset. + **/ +static void igbvf_configure_rx(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct igbvf_ring *rx_ring = adapter->rx_ring; + u64 rdba; + u32 rdlen, rxdctl; + + /* disable receives */ + rxdctl = er32(RXDCTL(0)); + ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE); + msleep(10); + + rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc); + + /* + * Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring + */ + rdba = rx_ring->dma; + ew32(RDBAL(0), (rdba & DMA_32BIT_MASK)); + ew32(RDBAH(0), (rdba >> 32)); + ew32(RDLEN(0), rx_ring->count * sizeof(union e1000_adv_rx_desc)); + rx_ring->head = E1000_RDH(0); + rx_ring->tail = E1000_RDT(0); + ew32(RDH(0), 0); + ew32(RDT(0), 0); + + rxdctl |= E1000_RXDCTL_QUEUE_ENABLE; + rxdctl &= 0xFFF00000; + rxdctl |= IGBVF_RX_PTHRESH; + rxdctl |= IGBVF_RX_HTHRESH << 8; + rxdctl |= IGBVF_RX_WTHRESH << 16; + + igbvf_set_rlpml(adapter); + + /* enable receives */ + ew32(RXDCTL(0), rxdctl); +} + +/** + * igbvf_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + **/ +static void igbvf_set_multi(struct net_device *netdev) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct dev_mc_list *mc_ptr; + u8 *mta_list = NULL; + int i; + + if (netdev->mc_count) { + mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC); + if (!mta_list) { + dev_err(&adapter->pdev->dev, + "failed to allocate multicast filter list\n"); + return; + } + } + + /* prepare a packed array of only addresses. */ + mc_ptr = netdev->mc_list; + + for (i = 0; i < netdev->mc_count; i++) { + if (!mc_ptr) + break; + memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, + ETH_ALEN); + mc_ptr = mc_ptr->next; + } + + hw->mac.ops.update_mc_addr_list(hw, mta_list, i, 0, 0); + kfree(mta_list); +} + +/** + * igbvf_configure - configure the hardware for Rx and Tx + * @adapter: private board structure + **/ +static void igbvf_configure(struct igbvf_adapter *adapter) +{ + igbvf_set_multi(adapter->netdev); + + igbvf_restore_vlan(adapter); + + igbvf_configure_tx(adapter); + igbvf_setup_srrctl(adapter); + igbvf_configure_rx(adapter); + igbvf_alloc_rx_buffers(adapter->rx_ring, + igbvf_desc_unused(adapter->rx_ring)); +} + +/* igbvf_reset - bring the hardware into a known good state + * + * This function boots the hardware and enables some settings that + * require a configuration cycle of the hardware - those cannot be + * set/changed during runtime. After reset the device needs to be + * properly configured for Rx, Tx etc. + */ +void igbvf_reset(struct igbvf_adapter *adapter) +{ + struct e1000_mac_info *mac = &adapter->hw.mac; + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + + /* Allow time for pending master requests to run */ + if (mac->ops.reset_hw(hw)) + dev_err(&adapter->pdev->dev, "PF still resetting\n"); + + mac->ops.init_hw(hw); + + if (is_valid_ether_addr(adapter->hw.mac.addr)) { + memcpy(netdev->dev_addr, adapter->hw.mac.addr, + netdev->addr_len); + memcpy(netdev->perm_addr, adapter->hw.mac.addr, + netdev->addr_len); + } +} + +int igbvf_up(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + /* hardware has been reset, we need to reload some things */ + igbvf_configure(adapter); + + clear_bit(__IGBVF_DOWN, &adapter->state); + + napi_enable(&adapter->rx_ring->napi); + if (adapter->msix_entries) + igbvf_configure_msix(adapter); + + /* Clear any pending interrupts. */ + er32(EICR); + igbvf_irq_enable(adapter); + + /* start the watchdog */ + hw->mac.get_link_status = 1; + mod_timer(&adapter->watchdog_timer, jiffies + 1); + + + return 0; +} + +void igbvf_down(struct igbvf_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + u32 rxdctl, txdctl; + + /* + * signal that we're down so the interrupt handler does not + * reschedule our watchdog timer + */ + set_bit(__IGBVF_DOWN, &adapter->state); + + /* disable receives in the hardware */ + rxdctl = er32(RXDCTL(0)); + ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE); + + netif_stop_queue(netdev); + + /* disable transmits in the hardware */ + txdctl = er32(TXDCTL(0)); + ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE); + + /* flush both disables and wait for them to finish */ + e1e_flush(); + msleep(10); + + napi_disable(&adapter->rx_ring->napi); + + igbvf_irq_disable(adapter); + + del_timer_sync(&adapter->watchdog_timer); + + netdev->tx_queue_len = adapter->tx_queue_len; + netif_carrier_off(netdev); + + /* record the stats before reset*/ + igbvf_update_stats(adapter); + + adapter->link_speed = 0; + adapter->link_duplex = 0; + + igbvf_reset(adapter); + igbvf_clean_tx_ring(adapter->tx_ring); + igbvf_clean_rx_ring(adapter->rx_ring); +} + +void igbvf_reinit_locked(struct igbvf_adapter *adapter) +{ + might_sleep(); + while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) + msleep(1); + igbvf_down(adapter); + igbvf_up(adapter); + clear_bit(__IGBVF_RESETTING, &adapter->state); +} + +/** + * igbvf_sw_init - Initialize general software structures (struct igbvf_adapter) + * @adapter: board private structure to initialize + * + * igbvf_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int __devinit igbvf_sw_init(struct igbvf_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + s32 rc; + + adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; + adapter->rx_ps_hdr_size = 0; + adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + adapter->tx_int_delay = 8; + adapter->tx_abs_int_delay = 32; + adapter->rx_int_delay = 0; + adapter->rx_abs_int_delay = 8; + adapter->itr_setting = 3; + adapter->itr = 20000; + + /* Set various function pointers */ + adapter->ei->init_ops(&adapter->hw); + + rc = adapter->hw.mac.ops.init_params(&adapter->hw); + if (rc) + return rc; + + rc = adapter->hw.mbx.ops.init_params(&adapter->hw); + if (rc) + return rc; + + igbvf_set_interrupt_capability(adapter); + + if (igbvf_alloc_queues(adapter)) + return -ENOMEM; + + spin_lock_init(&adapter->tx_queue_lock); + + /* Explicitly disable IRQ since the NIC can be in any state. */ + igbvf_irq_disable(adapter); + + spin_lock_init(&adapter->stats_lock); + + set_bit(__IGBVF_DOWN, &adapter->state); + return 0; +} + +static void igbvf_initialize_last_counter_stats(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + adapter->stats.last_gprc = er32(VFGPRC); + adapter->stats.last_gorc = er32(VFGORC); + adapter->stats.last_gptc = er32(VFGPTC); + adapter->stats.last_gotc = er32(VFGOTC); + adapter->stats.last_mprc = er32(VFMPRC); + adapter->stats.last_gotlbc = er32(VFGOTLBC); + adapter->stats.last_gptlbc = er32(VFGPTLBC); + adapter->stats.last_gorlbc = er32(VFGORLBC); + adapter->stats.last_gprlbc = er32(VFGPRLBC); + + adapter->stats.base_gprc = er32(VFGPRC); + adapter->stats.base_gorc = er32(VFGORC); + adapter->stats.base_gptc = er32(VFGPTC); + adapter->stats.base_gotc = er32(VFGOTC); + adapter->stats.base_mprc = er32(VFMPRC); + adapter->stats.base_gotlbc = er32(VFGOTLBC); + adapter->stats.base_gptlbc = er32(VFGPTLBC); + adapter->stats.base_gorlbc = er32(VFGORLBC); + adapter->stats.base_gprlbc = er32(VFGPRLBC); +} + +/** + * igbvf_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +static int igbvf_open(struct net_device *netdev) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int err; + + /* disallow open during test */ + if (test_bit(__IGBVF_TESTING, &adapter->state)) + return -EBUSY; + + /* allocate transmit descriptors */ + err = igbvf_setup_tx_resources(adapter, adapter->tx_ring); + if (err) + goto err_setup_tx; + + /* allocate receive descriptors */ + err = igbvf_setup_rx_resources(adapter, adapter->rx_ring); + if (err) + goto err_setup_rx; + + /* + * before we allocate an interrupt, we must be ready to handle it. + * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt + * as soon as we call pci_request_irq, so we have to setup our + * clean_rx handler before we do so. + */ + igbvf_configure(adapter); + + err = igbvf_request_irq(adapter); + if (err) + goto err_req_irq; + + /* From here on the code is the same as igbvf_up() */ + clear_bit(__IGBVF_DOWN, &adapter->state); + + napi_enable(&adapter->rx_ring->napi); + + /* clear any pending interrupts */ + er32(EICR); + + igbvf_irq_enable(adapter); + + /* start the watchdog */ + hw->mac.get_link_status = 1; + mod_timer(&adapter->watchdog_timer, jiffies + 1); + + return 0; + +err_req_irq: + igbvf_free_rx_resources(adapter->rx_ring); +err_setup_rx: + igbvf_free_tx_resources(adapter->tx_ring); +err_setup_tx: + igbvf_reset(adapter); + + return err; +} + +/** + * igbvf_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int igbvf_close(struct net_device *netdev) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + + WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state)); + igbvf_down(adapter); + + igbvf_free_irq(adapter); + + igbvf_free_tx_resources(adapter->tx_ring); + igbvf_free_rx_resources(adapter->rx_ring); + + return 0; +} +/** + * igbvf_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int igbvf_set_mac(struct net_device *netdev, void *p) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); + + hw->mac.ops.rar_set(hw, hw->mac.addr, 0); + + if (memcmp(addr->sa_data, hw->mac.addr, 6)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + + return 0; +} + +#define UPDATE_VF_COUNTER(reg, name) \ + { \ + u32 current_counter = er32(reg); \ + if (current_counter < adapter->stats.last_##name) \ + adapter->stats.name += 0x100000000LL; \ + adapter->stats.last_##name = current_counter; \ + adapter->stats.name &= 0xFFFFFFFF00000000LL; \ + adapter->stats.name |= current_counter; \ + } + +/** + * igbvf_update_stats - Update the board statistics counters + * @adapter: board private structure +**/ +void igbvf_update_stats(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + + /* + * Prevent stats update while adapter is being reset, link is down + * or if the pci connection is down. + */ + if (adapter->link_speed == 0) + return; + + if (test_bit(__IGBVF_RESETTING, &adapter->state)) + return; + + if (pci_channel_offline(pdev)) + return; + + UPDATE_VF_COUNTER(VFGPRC, gprc); + UPDATE_VF_COUNTER(VFGORC, gorc); + UPDATE_VF_COUNTER(VFGPTC, gptc); + UPDATE_VF_COUNTER(VFGOTC, gotc); + UPDATE_VF_COUNTER(VFMPRC, mprc); + UPDATE_VF_COUNTER(VFGOTLBC, gotlbc); + UPDATE_VF_COUNTER(VFGPTLBC, gptlbc); + UPDATE_VF_COUNTER(VFGORLBC, gorlbc); + UPDATE_VF_COUNTER(VFGPRLBC, gprlbc); + + /* Fill out the OS statistics structure */ + adapter->net_stats.multicast = adapter->stats.mprc; +} + +static void igbvf_print_link_info(struct igbvf_adapter *adapter) +{ + dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s\n", + adapter->link_speed, + ((adapter->link_duplex == FULL_DUPLEX) ? + "Full Duplex" : "Half Duplex")); +} + +static bool igbvf_has_link(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + s32 ret_val = E1000_SUCCESS; + bool link_active; + + ret_val = hw->mac.ops.check_for_link(hw); + link_active = !hw->mac.get_link_status; + + /* if check for link returns error we will need to reset */ + if (ret_val) + schedule_work(&adapter->reset_task); + + return link_active; +} + +/** + * igbvf_watchdog - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +static void igbvf_watchdog(unsigned long data) +{ + struct igbvf_adapter *adapter = (struct igbvf_adapter *) data; + + /* Do the rest outside of interrupt context */ + schedule_work(&adapter->watchdog_task); +} + +static void igbvf_watchdog_task(struct work_struct *work) +{ + struct igbvf_adapter *adapter = container_of(work, + struct igbvf_adapter, + watchdog_task); + struct net_device *netdev = adapter->netdev; + struct e1000_mac_info *mac = &adapter->hw.mac; + struct igbvf_ring *tx_ring = adapter->tx_ring; + struct e1000_hw *hw = &adapter->hw; + u32 link; + int tx_pending = 0; + + link = igbvf_has_link(adapter); + + if (link) { + if (!netif_carrier_ok(netdev)) { + bool txb2b = 1; + + mac->ops.get_link_up_info(&adapter->hw, + &adapter->link_speed, + &adapter->link_duplex); + igbvf_print_link_info(adapter); + + /* + * tweak tx_queue_len according to speed/duplex + * and adjust the timeout factor + */ + netdev->tx_queue_len = adapter->tx_queue_len; + adapter->tx_timeout_factor = 1; + switch (adapter->link_speed) { + case SPEED_10: + txb2b = 0; + netdev->tx_queue_len = 10; + adapter->tx_timeout_factor = 16; + break; + case SPEED_100: + txb2b = 0; + netdev->tx_queue_len = 100; + /* maybe add some timeout factor ? */ + break; + } + + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } + } else { + if (netif_carrier_ok(netdev)) { + adapter->link_speed = 0; + adapter->link_duplex = 0; + dev_info(&adapter->pdev->dev, "Link is Down\n"); + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + } + + if (netif_carrier_ok(netdev)) { + igbvf_update_stats(adapter); + } else { + tx_pending = (igbvf_desc_unused(tx_ring) + 1 < + tx_ring->count); + if (tx_pending) { + /* + * We've lost link, so the controller stops DMA, + * but we've got queued Tx work that's never going + * to get done, so reset controller to flush Tx. + * (Do the reset outside of interrupt context). + */ + adapter->tx_timeout_count++; + schedule_work(&adapter->reset_task); + } + } + + /* Cause software interrupt to ensure Rx ring is cleaned */ + ew32(EICS, adapter->rx_ring->eims_value); + + /* Force detection of hung controller every watchdog period */ + adapter->detect_tx_hung = 1; + + /* Reset the timer */ + if (!test_bit(__IGBVF_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + (2 * HZ))); +} + +#define IGBVF_TX_FLAGS_CSUM 0x00000001 +#define IGBVF_TX_FLAGS_VLAN 0x00000002 +#define IGBVF_TX_FLAGS_TSO 0x00000004 +#define IGBVF_TX_FLAGS_IPV4 0x00000008 +#define IGBVF_TX_FLAGS_VLAN_MASK 0xffff0000 +#define IGBVF_TX_FLAGS_VLAN_SHIFT 16 + +static int igbvf_tso(struct igbvf_adapter *adapter, + struct igbvf_ring *tx_ring, + struct sk_buff *skb, u32 tx_flags, u8 *hdr_len) +{ + struct e1000_adv_tx_context_desc *context_desc; + unsigned int i; + int err; + struct igbvf_buffer *buffer_info; + u32 info = 0, tu_cmd = 0; + u32 mss_l4len_idx, l4len; + *hdr_len = 0; + + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) { + dev_err(&adapter->pdev->dev, + "igbvf_tso returning an error\n"); + return err; + } + } + + l4len = tcp_hdrlen(skb); + *hdr_len += l4len; + + if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, + IPPROTO_TCP, + 0); + } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { + ipv6_hdr(skb)->payload_len = 0; + tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + } + + i = tx_ring->next_to_use; + + buffer_info = &tx_ring->buffer_info[i]; + context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i); + /* VLAN MACLEN IPLEN */ + if (tx_flags & IGBVF_TX_FLAGS_VLAN) + info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK); + info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT); + *hdr_len += skb_network_offset(skb); + info |= (skb_transport_header(skb) - skb_network_header(skb)); + *hdr_len += (skb_transport_header(skb) - skb_network_header(skb)); + context_desc->vlan_macip_lens = cpu_to_le32(info); + + /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ + tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); + + if (skb->protocol == htons(ETH_P_IP)) + tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; + tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; + + context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd); + + /* MSS L4LEN IDX */ + mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT); + mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT); + + context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); + context_desc->seqnum_seed = 0; + + buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; + buffer_info->dma = 0; + i++; + if (i == tx_ring->count) + i = 0; + + tx_ring->next_to_use = i; + + return true; +} + +static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter, + struct igbvf_ring *tx_ring, + struct sk_buff *skb, u32 tx_flags) +{ + struct e1000_adv_tx_context_desc *context_desc; + unsigned int i; + struct igbvf_buffer *buffer_info; + u32 info = 0, tu_cmd = 0; + + if ((skb->ip_summed == CHECKSUM_PARTIAL) || + (tx_flags & IGBVF_TX_FLAGS_VLAN)) { + i = tx_ring->next_to_use; + buffer_info = &tx_ring->buffer_info[i]; + context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i); + + if (tx_flags & IGBVF_TX_FLAGS_VLAN) + info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK); + + info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT); + if (skb->ip_summed == CHECKSUM_PARTIAL) + info |= (skb_transport_header(skb) - + skb_network_header(skb)); + + + context_desc->vlan_macip_lens = cpu_to_le32(info); + + tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT); + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + switch (skb->protocol) { + case __constant_htons(ETH_P_IP): + tu_cmd |= E1000_ADVTXD_TUCMD_IPV4; + if (ip_hdr(skb)->protocol == IPPROTO_TCP) + tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; + break; + case __constant_htons(ETH_P_IPV6): + if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) + tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP; + break; + default: + break; + } + } + + context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd); + context_desc->seqnum_seed = 0; + context_desc->mss_l4len_idx = 0; + + buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; + buffer_info->dma = 0; + i++; + if (i == tx_ring->count) + i = 0; + tx_ring->next_to_use = i; + + return true; + } + + return false; +} + +static int igbvf_maybe_stop_tx(struct net_device *netdev, int size) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + + /* there is enough descriptors then we don't need to worry */ + if (igbvf_desc_unused(adapter->tx_ring) >= size) + return 0; + + netif_stop_queue(netdev); + + smp_mb(); + + /* We need to check again just in case room has been made available */ + if (igbvf_desc_unused(adapter->tx_ring) < size) + return -EBUSY; + + netif_wake_queue(netdev); + + ++adapter->restart_queue; + return 0; +} + +#define IGBVF_MAX_TXD_PWR 16 +#define IGBVF_MAX_DATA_PER_TXD (1 << IGBVF_MAX_TXD_PWR) + +static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, + struct igbvf_ring *tx_ring, + struct sk_buff *skb, + unsigned int first) +{ + struct igbvf_buffer *buffer_info; + unsigned int len = skb_headlen(skb); + unsigned int count = 0, i; + unsigned int f; + dma_addr_t *map; + + i = tx_ring->next_to_use; + + if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) { + dev_err(&adapter->pdev->dev, "TX DMA map failed\n"); + return 0; + } + + map = skb_shinfo(skb)->dma_maps; + + buffer_info = &tx_ring->buffer_info[i]; + BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD); + buffer_info->length = len; + /* set time_stamp *before* dma to help avoid a possible race */ + buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; + buffer_info->dma = map[count]; + count++; + + for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) { + struct skb_frag_struct *frag; + + i++; + if (i == tx_ring->count) + i = 0; + + frag = &skb_shinfo(skb)->frags[f]; + len = frag->size; + + buffer_info = &tx_ring->buffer_info[i]; + BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD); + buffer_info->length = len; + buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; + buffer_info->dma = map[count]; + count++; + } + + tx_ring->buffer_info[i].skb = skb; + tx_ring->buffer_info[first].next_to_watch = i; + + return count; +} + +static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter, + struct igbvf_ring *tx_ring, + int tx_flags, int count, u32 paylen, + u8 hdr_len) +{ + union e1000_adv_tx_desc *tx_desc = NULL; + struct igbvf_buffer *buffer_info; + u32 olinfo_status = 0, cmd_type_len; + unsigned int i; + + cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS | + E1000_ADVTXD_DCMD_DEXT); + + if (tx_flags & IGBVF_TX_FLAGS_VLAN) + cmd_type_len |= E1000_ADVTXD_DCMD_VLE; + + if (tx_flags & IGBVF_TX_FLAGS_TSO) { + cmd_type_len |= E1000_ADVTXD_DCMD_TSE; + + /* insert tcp checksum */ + olinfo_status |= E1000_TXD_POPTS_TXSM << 8; + + /* insert ip checksum */ + if (tx_flags & IGBVF_TX_FLAGS_IPV4) + olinfo_status |= E1000_TXD_POPTS_IXSM << 8; + + } else if (tx_flags & IGBVF_TX_FLAGS_CSUM) { + olinfo_status |= E1000_TXD_POPTS_TXSM << 8; + } + + olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT); + + i = tx_ring->next_to_use; + while (count--) { + buffer_info = &tx_ring->buffer_info[i]; + tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i); + tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); + tx_desc->read.cmd_type_len = + cpu_to_le32(cmd_type_len | buffer_info->length); + tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); + i++; + if (i == tx_ring->count) + i = 0; + } + + tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd); + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + + tx_ring->next_to_use = i; + writel(i, adapter->hw.hw_addr + tx_ring->tail); + /* we need this if more than one processor can write to our tail + * at a time, it syncronizes IO on IA64/Altix systems */ + mmiowb(); +} + +static int igbvf_xmit_frame_ring_adv(struct sk_buff *skb, + struct net_device *netdev, + struct igbvf_ring *tx_ring) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + unsigned int first, tx_flags = 0; + u8 hdr_len = 0; + int count = 0; + int tso = 0; + + if (test_bit(__IGBVF_DOWN, &adapter->state)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (skb->len <= 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + /* + * need: count + 4 desc gap to keep tail from touching + * + 2 desc gap to keep tail from touching head, + * + 1 desc for skb->data, + * + 1 desc for context descriptor, + * head, otherwise try next time + */ + if (igbvf_maybe_stop_tx(netdev, skb_shinfo(skb)->nr_frags + 4)) { + /* this is a hard error */ + return NETDEV_TX_BUSY; + } + + if (adapter->vlgrp && vlan_tx_tag_present(skb)) { + tx_flags |= IGBVF_TX_FLAGS_VLAN; + tx_flags |= (vlan_tx_tag_get(skb) << IGBVF_TX_FLAGS_VLAN_SHIFT); + } + + if (skb->protocol == htons(ETH_P_IP)) + tx_flags |= IGBVF_TX_FLAGS_IPV4; + + first = tx_ring->next_to_use; + + tso = skb_is_gso(skb) ? + igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len) : 0; + if (unlikely(tso < 0)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (tso) + tx_flags |= IGBVF_TX_FLAGS_TSO; + else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags) && + (skb->ip_summed == CHECKSUM_PARTIAL)) + tx_flags |= IGBVF_TX_FLAGS_CSUM; + + /* + * count reflects descriptors mapped, if 0 then mapping error + * has occured and we need to rewind the descriptor queue + */ + count = igbvf_tx_map_adv(adapter, tx_ring, skb, first); + + if (count) { + igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count, + skb->len, hdr_len); + netdev->trans_start = jiffies; + /* Make sure there is space in the ring for the next send. */ + igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4); + } else { + dev_kfree_skb_any(skb); + tx_ring->buffer_info[first].time_stamp = 0; + tx_ring->next_to_use = first; + } + + return NETDEV_TX_OK; +} + +static int igbvf_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct igbvf_ring *tx_ring; + int retval; + + if (test_bit(__IGBVF_DOWN, &adapter->state)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + tx_ring = &adapter->tx_ring[0]; + + retval = igbvf_xmit_frame_ring_adv(skb, netdev, tx_ring); + + return retval; +} + +/** + * igbvf_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + **/ +static void igbvf_tx_timeout(struct net_device *netdev) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + adapter->tx_timeout_count++; + schedule_work(&adapter->reset_task); +} + +static void igbvf_reset_task(struct work_struct *work) +{ + struct igbvf_adapter *adapter; + adapter = container_of(work, struct igbvf_adapter, reset_task); + + igbvf_reinit_locked(adapter); +} + +/** + * igbvf_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + **/ +static struct net_device_stats *igbvf_get_stats(struct net_device *netdev) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + + /* only return the current stats */ + return &adapter->net_stats; +} + +/** + * igbvf_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + **/ +static int igbvf_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + + if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { + dev_err(&adapter->pdev->dev, "Invalid MTU setting\n"); + return -EINVAL; + } + + /* Jumbo frame size limits */ + if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) { + if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { + dev_err(&adapter->pdev->dev, + "Jumbo Frames not supported.\n"); + return -EINVAL; + } + } + +#define MAX_STD_JUMBO_FRAME_SIZE 9234 + if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { + dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n"); + return -EINVAL; + } + + while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) + msleep(1); + /* igbvf_down has a dependency on max_frame_size */ + adapter->max_frame_size = max_frame; + if (netif_running(netdev)) + igbvf_down(adapter); + + /* + * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN + * means we reserve 2 more, this pushes us to allocate from the next + * larger slab size. + * i.e. RXBUFFER_2048 --> size-4096 slab + * However with the new *_jumbo_rx* routines, jumbo receives will use + * fragmented skbs + */ + + if (max_frame <= 1024) + adapter->rx_buffer_len = 1024; + else if (max_frame <= 2048) + adapter->rx_buffer_len = 2048; + else +#if (PAGE_SIZE / 2) > 16384 + adapter->rx_buffer_len = 16384; +#else + adapter->rx_buffer_len = PAGE_SIZE / 2; +#endif + + + /* adjust allocation if LPE protects us, and we aren't using SBP */ + if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || + (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) + adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + + ETH_FCS_LEN; + + dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n", + netdev->mtu, new_mtu); + netdev->mtu = new_mtu; + + if (netif_running(netdev)) + igbvf_up(adapter); + else + igbvf_reset(adapter); + + clear_bit(__IGBVF_RESETTING, &adapter->state); + + return 0; +} + +static int igbvf_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + default: + return -EOPNOTSUPP; + } +} + +static int igbvf_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igbvf_adapter *adapter = netdev_priv(netdev); +#ifdef CONFIG_PM + int retval = 0; +#endif + + netif_device_detach(netdev); + + if (netif_running(netdev)) { + WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state)); + igbvf_down(adapter); + igbvf_free_irq(adapter); + } + +#ifdef CONFIG_PM + retval = pci_save_state(pdev); + if (retval) + return retval; +#endif + + pci_disable_device(pdev); + + return 0; +} + +#ifdef CONFIG_PM +static int igbvf_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igbvf_adapter *adapter = netdev_priv(netdev); + u32 err; + + pci_restore_state(pdev); + err = pci_enable_device_mem(pdev); + if (err) { + dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n"); + return err; + } + + pci_set_master(pdev); + + if (netif_running(netdev)) { + err = igbvf_request_irq(adapter); + if (err) + return err; + } + + igbvf_reset(adapter); + + if (netif_running(netdev)) + igbvf_up(adapter); + + netif_device_attach(netdev); + + return 0; +} +#endif + +static void igbvf_shutdown(struct pci_dev *pdev) +{ + igbvf_suspend(pdev, PMSG_SUSPEND); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void igbvf_netpoll(struct net_device *netdev) +{ + struct igbvf_adapter *adapter = netdev_priv(netdev); + + disable_irq(adapter->pdev->irq); + + igbvf_clean_tx_irq(adapter->tx_ring); + + enable_irq(adapter->pdev->irq); +} +#endif + +/** + * igbvf_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t igbvf_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igbvf_adapter *adapter = netdev_priv(netdev); + + netif_device_detach(netdev); + + if (netif_running(netdev)) + igbvf_down(adapter); + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * igbvf_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the igbvf_resume routine. + */ +static pci_ers_result_t igbvf_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igbvf_adapter *adapter = netdev_priv(netdev); + + if (pci_enable_device_mem(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + + igbvf_reset(adapter); + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * igbvf_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the igbvf_resume routine. + */ +static void igbvf_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igbvf_adapter *adapter = netdev_priv(netdev); + + if (netif_running(netdev)) { + if (igbvf_up(adapter)) { + dev_err(&pdev->dev, + "can't bring device back up after reset\n"); + return; + } + } + + netif_device_attach(netdev); +} + +static void igbvf_print_device_info(struct igbvf_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + dev_info(&pdev->dev, "Intel(R) 82576 Virtual Function\n"); + dev_info(&pdev->dev, "Address: %02x:%02x:%02x:%02x:%02x:%02x\n", + /* MAC address */ + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); + dev_info(&pdev->dev, "MAC: %d\n", hw->mac.type); +} + +static const struct net_device_ops igbvf_netdev_ops = { + .ndo_open = igbvf_open, + .ndo_stop = igbvf_close, + .ndo_start_xmit = igbvf_xmit_frame, + .ndo_get_stats = igbvf_get_stats, + .ndo_set_multicast_list = igbvf_set_multi, + .ndo_set_mac_address = igbvf_set_mac, + .ndo_change_mtu = igbvf_change_mtu, + .ndo_do_ioctl = igbvf_ioctl, + .ndo_tx_timeout = igbvf_tx_timeout, + .ndo_vlan_rx_register = igbvf_vlan_rx_register, + .ndo_vlan_rx_add_vid = igbvf_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = igbvf_vlan_rx_kill_vid, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = igbvf_netpoll, +#endif +}; + +/** + * igbvf_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in igbvf_pci_tbl + * + * Returns 0 on success, negative on failure + * + * igbvf_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +static int __devinit igbvf_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct igbvf_adapter *adapter; + struct e1000_hw *hw; + const struct igbvf_info *ei = igbvf_info_tbl[ent->driver_data]; + + static int cards_found; + int err, pci_using_dac; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + pci_using_dac = 0; + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + if (!err) { + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (!err) + pci_using_dac = 1; + } else { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + dev_err(&pdev->dev, "No usable DMA " + "configuration, aborting\n"); + goto err_dma; + } + } + } + + err = pci_request_regions(pdev, igbvf_driver_name); + if (err) + goto err_pci_reg; + + pci_set_master(pdev); + + err = -ENOMEM; + netdev = alloc_etherdev(sizeof(struct igbvf_adapter)); + if (!netdev) + goto err_alloc_etherdev; + + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + hw = &adapter->hw; + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->ei = ei; + adapter->pba = ei->pba; + adapter->flags = ei->flags; + adapter->hw.back = adapter; + adapter->hw.mac.type = ei->mac; + adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; + + /* PCI config space info */ + + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_device_id = pdev->subsystem_device; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); + + err = -EIO; + adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + + if (!adapter->hw.hw_addr) + goto err_ioremap; + + if (ei->get_variants) { + err = ei->get_variants(adapter); + if (err) + goto err_ioremap; + } + + /* setup adapter struct */ + err = igbvf_sw_init(adapter); + if (err) + goto err_sw_init; + + /* construct the net_device struct */ + netdev->netdev_ops = &igbvf_netdev_ops; + + igbvf_set_ethtool_ops(netdev); + netdev->watchdog_timeo = 5 * HZ; + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + adapter->bd_number = cards_found++; + + netdev->features = NETIF_F_SG | + NETIF_F_IP_CSUM | + NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER; + + netdev->features |= NETIF_F_IPV6_CSUM; + netdev->features |= NETIF_F_TSO; + netdev->features |= NETIF_F_TSO6; + + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + + netdev->vlan_features |= NETIF_F_TSO; + netdev->vlan_features |= NETIF_F_TSO6; + netdev->vlan_features |= NETIF_F_IP_CSUM; + netdev->vlan_features |= NETIF_F_IPV6_CSUM; + netdev->vlan_features |= NETIF_F_SG; + + /*reset the controller to put the device in a known good state */ + err = hw->mac.ops.reset_hw(hw); + if (err) { + dev_info(&pdev->dev, + "PF still in reset state, assigning new address\n"); + random_ether_addr(hw->mac.addr); + } else { + err = hw->mac.ops.read_mac_addr(hw); + if (err) { + dev_err(&pdev->dev, "Error reading MAC address\n"); + goto err_hw_init; + } + } + + memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); + memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->perm_addr)) { + dev_err(&pdev->dev, "Invalid MAC Address: " + "%02x:%02x:%02x:%02x:%02x:%02x\n", + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); + err = -EIO; + goto err_hw_init; + } + + setup_timer(&adapter->watchdog_timer, &igbvf_watchdog, + (unsigned long) adapter); + + INIT_WORK(&adapter->reset_task, igbvf_reset_task); + INIT_WORK(&adapter->watchdog_task, igbvf_watchdog_task); + + /* ring size defaults */ + adapter->rx_ring->count = 1024; + adapter->tx_ring->count = 1024; + + /* reset the hardware with the new settings */ + igbvf_reset(adapter); + + /* tell the stack to leave us alone until igbvf_open() is called */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + strcpy(netdev->name, "eth%d"); + err = register_netdev(netdev); + if (err) + goto err_hw_init; + + igbvf_print_device_info(adapter); + + igbvf_initialize_last_counter_stats(adapter); + + return 0; + +err_hw_init: + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +err_sw_init: + igbvf_reset_interrupt_capability(adapter); + iounmap(adapter->hw.hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/** + * igbvf_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * igbvf_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void __devexit igbvf_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igbvf_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* + * flush_scheduled work may reschedule our watchdog task, so + * explicitly disable watchdog tasks from being rescheduled + */ + set_bit(__IGBVF_DOWN, &adapter->state); + del_timer_sync(&adapter->watchdog_timer); + + flush_scheduled_work(); + + unregister_netdev(netdev); + + igbvf_reset_interrupt_capability(adapter); + + /* + * it is important to delete the napi struct prior to freeing the + * rx ring so that you do not end up with null pointer refs + */ + netif_napi_del(&adapter->rx_ring->napi); + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); + + iounmap(hw->hw_addr); + if (hw->flash_address) + iounmap(hw->flash_address); + pci_release_regions(pdev); + + free_netdev(netdev); + + pci_disable_device(pdev); +} + +/* PCI Error Recovery (ERS) */ +static struct pci_error_handlers igbvf_err_handler = { + .error_detected = igbvf_io_error_detected, + .slot_reset = igbvf_io_slot_reset, + .resume = igbvf_io_resume, +}; + +static struct pci_device_id igbvf_pci_tbl[] = { + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_VF), board_vf }, + { } /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, igbvf_pci_tbl); + +/* PCI Device API Driver */ +static struct pci_driver igbvf_driver = { + .name = igbvf_driver_name, + .id_table = igbvf_pci_tbl, + .probe = igbvf_probe, + .remove = __devexit_p(igbvf_remove), +#ifdef CONFIG_PM + /* Power Management Hooks */ + .suspend = igbvf_suspend, + .resume = igbvf_resume, +#endif + .shutdown = igbvf_shutdown, + .err_handler = &igbvf_err_handler +}; + +/** + * igbvf_init_module - Driver Registration Routine + * + * igbvf_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + **/ +static int __init igbvf_init_module(void) +{ + int ret; + printk(KERN_INFO "%s - version %s\n", + igbvf_driver_string, igbvf_driver_version); + printk(KERN_INFO "%s\n", igbvf_copyright); + + ret = pci_register_driver(&igbvf_driver); + pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, igbvf_driver_name, + PM_QOS_DEFAULT_VALUE); + + return ret; +} +module_init(igbvf_init_module); + +/** + * igbvf_exit_module - Driver Exit Cleanup Routine + * + * igbvf_exit_module is called just before the driver is removed + * from memory. + **/ +static void __exit igbvf_exit_module(void) +{ + pci_unregister_driver(&igbvf_driver); + pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, igbvf_driver_name); +} +module_exit(igbvf_exit_module); + + +MODULE_AUTHOR("Intel Corporation, "); +MODULE_DESCRIPTION("Intel(R) 82576 Virtual Function Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +/* netdev.c */ diff --git a/drivers/net/igbvf/regs.h b/drivers/net/igbvf/regs.h new file mode 100644 index 0000000..b9e24ed --- /dev/null +++ b/drivers/net/igbvf/regs.h @@ -0,0 +1,108 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_REGS_H_ +#define _E1000_REGS_H_ + +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ +#define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) +#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ +#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ +#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ +#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ +#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ +#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */ +#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */ +/* + * Convenience macros + * + * Note: "_n" is the queue number of the register to be written to. + * + * Example usage: + * E1000_RDBAL_REG(current_rx_queue) + */ +#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \ + (0x0C000 + ((_n) * 0x40))) +#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \ + (0x0C004 + ((_n) * 0x40))) +#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \ + (0x0C008 + ((_n) * 0x40))) +#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \ + (0x0C00C + ((_n) * 0x40))) +#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \ + (0x0C010 + ((_n) * 0x40))) +#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \ + (0x0C018 + ((_n) * 0x40))) +#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \ + (0x0C028 + ((_n) * 0x40))) +#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \ + (0x0E000 + ((_n) * 0x40))) +#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \ + (0x0E004 + ((_n) * 0x40))) +#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \ + (0x0E008 + ((_n) * 0x40))) +#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \ + (0x0E010 + ((_n) * 0x40))) +#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \ + (0x0E018 + ((_n) * 0x40))) +#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \ + (0x0E028 + ((_n) * 0x40))) +#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8)) +#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8)) +#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x054E0 + ((_i - 16) * 8))) +#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x054E4 + ((_i - 16) * 8))) + +/* Statistics registers */ +#define E1000_VFGPRC 0x00F10 +#define E1000_VFGORC 0x00F18 +#define E1000_VFMPRC 0x00F3C +#define E1000_VFGPTC 0x00F14 +#define E1000_VFGOTC 0x00F34 +#define E1000_VFGOTLBC 0x00F50 +#define E1000_VFGPTLBC 0x00F44 +#define E1000_VFGORLBC 0x00F48 +#define E1000_VFGPRLBC 0x00F40 + +/* These act per VF so an array friendly macro is used */ +#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n))) +#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n))) + +/* Define macros for handling registers */ +#define er32(reg) readl(hw->hw_addr + E1000_##reg) +#define ew32(reg, val) writel((val), hw->hw_addr + E1000_##reg) +#define array_er32(reg, offset) \ + readl(hw->hw_addr + E1000_##reg + (offset << 2)) +#define array_ew32(reg, offset, val) \ + writel((val), hw->hw_addr + E1000_##reg + (offset << 2)) +#define e1e_flush() er32(STATUS) + +#endif diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c new file mode 100644 index 0000000..aa246c9 --- /dev/null +++ b/drivers/net/igbvf/vf.c @@ -0,0 +1,398 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +#include "vf.h" + +static s32 e1000_check_for_link_vf(struct e1000_hw *hw); +static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +static s32 e1000_init_hw_vf(struct e1000_hw *hw); +static s32 e1000_reset_hw_vf(struct e1000_hw *hw); + +static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *, + u32, u32, u32); +static void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32); +static s32 e1000_read_mac_addr_vf(struct e1000_hw *); +static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool); + +/** + * e1000_init_mac_params_vf - Inits MAC params + * @hw: pointer to the HW structure + **/ +s32 e1000_init_mac_params_vf(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + /* VF's have no MTA Registers - PF feature only */ + mac->mta_reg_count = 128; + /* VF's have no access to RAR entries */ + mac->rar_entry_count = 1; + + /* Function pointers */ + /* reset */ + mac->ops.reset_hw = e1000_reset_hw_vf; + /* hw initialization */ + mac->ops.init_hw = e1000_init_hw_vf; + /* check for link */ + mac->ops.check_for_link = e1000_check_for_link_vf; + /* link info */ + mac->ops.get_link_up_info = e1000_get_link_up_info_vf; + /* multicast address update */ + mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_vf; + /* set mac address */ + mac->ops.rar_set = e1000_rar_set_vf; + /* read mac address */ + mac->ops.read_mac_addr = e1000_read_mac_addr_vf; + /* set vlan filter table array */ + mac->ops.set_vfta = e1000_set_vfta_vf; + + return E1000_SUCCESS; +} + +/** + * e1000_init_function_pointers_vf - Inits function pointers + * @hw: pointer to the HW structure + **/ +void e1000_init_function_pointers_vf(struct e1000_hw *hw) +{ + hw->mac.ops.init_params = e1000_init_mac_params_vf; + hw->mbx.ops.init_params = e1000_init_mbx_params_vf; +} + +/** + * e1000_get_link_up_info_vf - Gets link info. + * @hw: pointer to the HW structure + * @speed: pointer to 16 bit value to store link speed. + * @duplex: pointer to 16 bit value to store duplex. + * + * Since we cannot read the PHY and get accurate link info, we must rely upon + * the status register's data which is often stale and inaccurate. + **/ +static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 status; + + status = er32(STATUS); + if (status & E1000_STATUS_SPEED_1000) + *speed = SPEED_1000; + else if (status & E1000_STATUS_SPEED_100) + *speed = SPEED_100; + else + *speed = SPEED_10; + + if (status & E1000_STATUS_FD) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return E1000_SUCCESS; +} + +/** + * e1000_reset_hw_vf - Resets the HW + * @hw: pointer to the HW structure + * + * VF's provide a function level reset. This is done using bit 26 of ctrl_reg. + * This is all the reset we can perform on a VF. + **/ +static s32 e1000_reset_hw_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 timeout = E1000_VF_INIT_TIMEOUT; + u32 ret_val = -E1000_ERR_MAC_INIT; + u32 msgbuf[3]; + u8 *addr = (u8 *)(&msgbuf[1]); + u32 ctrl; + + /* assert vf queue/interrupt reset */ + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_RST); + + /* we cannot initialize while the RSTI / RSTD bits are asserted */ + while (!mbx->ops.check_for_rst(hw) && timeout) { + timeout--; + udelay(5); + } + + if (timeout) { + /* mailbox timeout can now become active */ + mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT; + + /* notify pf of vf reset completion */ + msgbuf[0] = E1000_VF_RESET; + mbx->ops.write_posted(hw, msgbuf, 1); + + msleep(10); + + /* set our "perm_addr" based on info provided by PF */ + ret_val = mbx->ops.read_posted(hw, msgbuf, 3); + if (!ret_val) { + if (msgbuf[0] == (E1000_VF_RESET | E1000_VT_MSGTYPE_ACK)) + memcpy(hw->mac.perm_addr, addr, 6); + else + ret_val = -E1000_ERR_MAC_INIT; + } + } + + return ret_val; +} + +/** + * e1000_init_hw_vf - Inits the HW + * @hw: pointer to the HW structure + * + * Not much to do here except clear the PF Reset indication if there is one. + **/ +static s32 e1000_init_hw_vf(struct e1000_hw *hw) +{ + /* attempt to set and restore our mac address */ + e1000_rar_set_vf(hw, hw->mac.addr, 0); + + return E1000_SUCCESS; +} + +/** + * e1000_hash_mc_addr_vf - Generate a multicast hash value + * @hw: pointer to the HW structure + * @mc_addr: pointer to a multicast address + * + * Generates a multicast address hash value which is used to determine + * the multicast filter table array address and new table value. See + * e1000_mta_set_generic() + **/ +static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr) +{ + u32 hash_value, hash_mask; + u8 bit_shift = 0; + + /* Register count multiplied by bits per register */ + hash_mask = (hw->mac.mta_reg_count * 32) - 1; + + /* + * The bit_shift is the number of left-shifts + * where 0xFF would still fall within the hash mask. + */ + while (hash_mask >> bit_shift != 0xFF) + bit_shift++; + + hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | + (((u16) mc_addr[5]) << bit_shift))); + + return hash_value; +} + +/** + * e1000_update_mc_addr_list_vf - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * @rar_used_count: the first RAR register free to program + * @rar_count: total number of supported Receive Address Registers + * + * Updates the Receive Address Registers and Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + * The parameter rar_count will usually be hw->mac.rar_entry_count + * unless there are workarounds that change this. + **/ +void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count, + u32 rar_used_count, u32 rar_count) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[E1000_VFMAILBOX_SIZE]; + u16 *hash_list = (u16 *)&msgbuf[1]; + u32 hash_value; + u32 cnt, i; + + /* Each entry in the list uses 1 16 bit word. We have 30 + * 16 bit words available in our HW msg buffer (minus 1 for the + * msg type). That's 30 hash values if we pack 'em right. If + * there are more than 30 MC addresses to add then punt the + * extras for now and then add code to handle more than 30 later. + * It would be unusual for a server to request that many multi-cast + * addresses except for in large enterprise network environments. + */ + + cnt = (mc_addr_count > 30) ? 30 : mc_addr_count; + msgbuf[0] = E1000_VF_SET_MULTICAST; + msgbuf[0] |= cnt << E1000_VT_MSGINFO_SHIFT; + + for (i = 0; i < cnt; i++) { + hash_value = e1000_hash_mc_addr_vf(hw, mc_addr_list); + hash_list[i] = hash_value & 0x0FFFF; + mc_addr_list += ETH_ADDR_LEN; + } + + mbx->ops.write_posted(hw, msgbuf, E1000_VFMAILBOX_SIZE); +} + +/** + * e1000_set_vfta_vf - Set/Unset vlan filter table address + * @hw: pointer to the HW structure + * @vid: determines the vfta register and bit to set/unset + * @set: if true then set bit, else clear bit + **/ +static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[2]; + s32 err; + + msgbuf[0] = E1000_VF_SET_VLAN; + msgbuf[1] = vid; + /* Setting the 8 bit field MSG INFO to true indicates "add" */ + if (set) + msgbuf[0] |= 1 << E1000_VT_MSGINFO_SHIFT; + + mbx->ops.write_posted(hw, msgbuf, 2); + + err = mbx->ops.read_posted(hw, msgbuf, 2); + + /* if nacked the vlan was rejected */ + if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK))) + err = -E1000_ERR_MAC_INIT; + + return err; +} + +/** e1000_rlpml_set_vf - Set the maximum receive packet length + * @hw: pointer to the HW structure + * @max_size: value to assign to max frame size + **/ +void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[2]; + + msgbuf[0] = E1000_VF_SET_LPE; + msgbuf[1] = max_size; + + mbx->ops.write_posted(hw, msgbuf, 2); +} + +/** + * e1000_rar_set_vf - set device MAC address + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index receive address array register + **/ +static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[3]; + u8 *msg_addr = (u8 *)(&msgbuf[1]); + s32 ret_val; + + memset(msgbuf, 0, 12); + msgbuf[0] = E1000_VF_SET_MAC_ADDR; + memcpy(msg_addr, addr, 6); + ret_val = mbx->ops.write_posted(hw, msgbuf, 3); + + if (!ret_val) + ret_val = mbx->ops.read_posted(hw, msgbuf, 3); + + /* if nacked the address was rejected, use "perm_addr" */ + if (!ret_val && + (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK))) + e1000_read_mac_addr_vf(hw); +} + +/** + * e1000_read_mac_addr_vf - Read device MAC address + * @hw: pointer to the HW structure + **/ +static s32 e1000_read_mac_addr_vf(struct e1000_hw *hw) +{ + int i; + + for (i = 0; i < ETH_ADDR_LEN; i++) + hw->mac.addr[i] = hw->mac.perm_addr[i]; + + return E1000_SUCCESS; +} + +/** + * e1000_check_for_link_vf - Check for link for a virtual interface + * @hw: pointer to the HW structure + * + * Checks to see if the underlying PF is still talking to the VF and + * if it is then it reports the link state to the hardware, otherwise + * it reports link down and returns an error. + **/ +static s32 e1000_check_for_link_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + u32 in_msg = 0; + + /* + * We only want to run this if there has been a rst asserted. + * in this case that could mean a link change, device reset, + * or a virtual function reset + */ + + /* If we were hit with a reset drop the link */ + if (!mbx->ops.check_for_rst(hw)) + mac->get_link_status = true; + + if (!mac->get_link_status) + goto out; + + /* if link status is down no point in checking to see if pf is up */ + if (!(er32(STATUS) & E1000_STATUS_LU)) + goto out; + + /* if the read failed it could just be a mailbox collision, best wait + * until we are called again and don't report an error */ + if (mbx->ops.read(hw, &in_msg, 1)) + goto out; + + /* if incoming message isn't clear to send we are waiting on response */ + if (!(in_msg & E1000_VT_MSGTYPE_CTS)) { + /* message is not CTS and is NACK we must have lost CTS status */ + if (in_msg & E1000_VT_MSGTYPE_NACK) + ret_val = -E1000_ERR_MAC_INIT; + goto out; + } + + /* the pf is talking, if we timed out in the past we reinit */ + if (!mbx->timeout) { + ret_val = -E1000_ERR_MAC_INIT; + goto out; + } + + /* if we passed all the tests above then the link is up and we no + * longer need to check for link */ + mac->get_link_status = false; + +out: + return ret_val; +} + diff --git a/drivers/net/igbvf/vf.h b/drivers/net/igbvf/vf.h new file mode 100644 index 0000000..ec07228 --- /dev/null +++ b/drivers/net/igbvf/vf.h @@ -0,0 +1,265 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_VF_H_ +#define _E1000_VF_H_ + +#include +#include +#include +#include + +#include "regs.h" +#include "defines.h" + +struct e1000_hw; + +#define E1000_DEV_ID_82576_VF 0x10CA +#define E1000_REVISION_0 0 +#define E1000_REVISION_1 1 +#define E1000_REVISION_2 2 +#define E1000_REVISION_3 3 +#define E1000_REVISION_4 4 + +#define E1000_FUNC_0 0 +#define E1000_FUNC_1 1 + +/* + * Receive Address Register Count + * Number of high/low register pairs in the RAR. The RAR (Receive Address + * Registers) holds the directed and multicast addresses that we monitor. + * These entries are also used for MAC-based filtering. + */ +#define E1000_RAR_ENTRIES_VF 1 + +/* Receive Descriptor - Advanced */ +union e1000_adv_rx_desc { + struct { + u64 pkt_addr; /* Packet buffer address */ + u64 hdr_addr; /* Header buffer address */ + } read; + struct { + struct { + union { + u32 data; + struct { + u16 pkt_info; /* RSS/Packet type */ + u16 hdr_info; /* Split Header, + * hdr buffer length */ + } hs_rss; + } lo_dword; + union { + u32 rss; /* RSS Hash */ + struct { + u16 ip_id; /* IP id */ + u16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + u32 status_error; /* ext status/error */ + u16 length; /* Packet length */ + u16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 +#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 + +/* Transmit Descriptor - Advanced */ +union e1000_adv_tx_desc { + struct { + u64 buffer_addr; /* Address of descriptor's data buf */ + u32 cmd_type_len; + u32 olinfo_status; + } read; + struct { + u64 rsvd; /* Reserved */ + u32 nxtseq_seed; + u32 status; + } wb; +}; + +/* Adv Transmit Descriptor Config Masks */ +#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ +#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ +#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ +#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ +#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ +#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ + +/* Context descriptors */ +struct e1000_adv_tx_context_desc { + u32 vlan_macip_lens; + u32 seqnum_seed; + u32 type_tucmd_mlhl; + u32 mss_l4len_idx; +}; + +#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ + +enum e1000_mac_type { + e1000_undefined = 0, + e1000_vfadapt, + e1000_num_macs /* List is 1-based, so subtract 1 for true count. */ +}; + +struct e1000_vf_stats { + u64 base_gprc; + u64 base_gptc; + u64 base_gorc; + u64 base_gotc; + u64 base_mprc; + u64 base_gotlbc; + u64 base_gptlbc; + u64 base_gorlbc; + u64 base_gprlbc; + + u32 last_gprc; + u32 last_gptc; + u32 last_gorc; + u32 last_gotc; + u32 last_mprc; + u32 last_gotlbc; + u32 last_gptlbc; + u32 last_gorlbc; + u32 last_gprlbc; + + u64 gprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 mprc; + u64 gotlbc; + u64 gptlbc; + u64 gorlbc; + u64 gprlbc; +}; + +#include "mbx.h" + +struct e1000_mac_operations { + /* Function pointers for the MAC. */ + s32 (*init_params)(struct e1000_hw *); + s32 (*check_for_link)(struct e1000_hw *); + void (*clear_vfta)(struct e1000_hw *); + s32 (*get_bus_info)(struct e1000_hw *); + s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *); + void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32, u32, u32); + s32 (*reset_hw)(struct e1000_hw *); + s32 (*init_hw)(struct e1000_hw *); + s32 (*setup_link)(struct e1000_hw *); + void (*write_vfta)(struct e1000_hw *, u32, u32); + void (*mta_set)(struct e1000_hw *, u32); + void (*rar_set)(struct e1000_hw *, u8*, u32); + s32 (*read_mac_addr)(struct e1000_hw *); + s32 (*set_vfta)(struct e1000_hw *, u16, bool); +}; + +struct e1000_mac_info { + struct e1000_mac_operations ops; + u8 addr[6]; + u8 perm_addr[6]; + + enum e1000_mac_type type; + + u16 mta_reg_count; + u16 rar_entry_count; + + bool get_link_status; +}; + +struct e1000_mbx_operations { + s32 (*init_params)(struct e1000_hw *hw); + s32 (*read)(struct e1000_hw *, u32 *, u16); + s32 (*write)(struct e1000_hw *, u32 *, u16); + s32 (*read_posted)(struct e1000_hw *, u32 *, u16); + s32 (*write_posted)(struct e1000_hw *, u32 *, u16); + s32 (*check_for_msg)(struct e1000_hw *); + s32 (*check_for_ack)(struct e1000_hw *); + s32 (*check_for_rst)(struct e1000_hw *); +}; + +struct e1000_mbx_stats { + u32 msgs_tx; + u32 msgs_rx; + + u32 acks; + u32 reqs; + u32 rsts; +}; + +struct e1000_mbx_info { + struct e1000_mbx_operations ops; + struct e1000_mbx_stats stats; + u32 timeout; + u32 usec_delay; + u16 size; +}; + +struct e1000_dev_spec_vf { + u32 vf_number; + u32 v2p_mailbox; +}; + +struct e1000_hw { + void *back; + + u8 __iomem *hw_addr; + u8 __iomem *flash_address; + unsigned long io_base; + + struct e1000_mac_info mac; + struct e1000_mbx_info mbx; + + union { + struct e1000_dev_spec_vf vf; + } dev_spec; + + u16 device_id; + u16 subsystem_vendor_id; + u16 subsystem_device_id; + u16 vendor_id; + + u8 revision_id; +}; + +/* These functions must be implemented by drivers */ +void e1000_rlpml_set_vf(struct e1000_hw *, u16); +void e1000_init_function_pointers_vf(struct e1000_hw *hw); +s32 e1000_init_mac_params_vf(struct e1000_hw *hw); + + +#endif /* _E1000_VF_H_ */ -- cgit v0.10.2 From 2a3abf6d17b6026a59e5cf7452d70ec1ad6a69fa Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 7 Apr 2009 14:37:52 +0000 Subject: igb: remove sysfs entry that was used to set the number of vfs This patch removes the sysfs entry num_vfs which was added to support enabling pci virtual functions for 82576. To prevent VFs from loading automatically a module parameter "max_vfs" was added so that the number of VFs per PF can be limited. This is especially useful when 4 or more 82576 ports are on the system because otherwise to load all VFs would result in 8 interface per physical port. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 6b0697c..db7274e 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -152,14 +152,13 @@ static struct notifier_block dca_notifier = { /* for netdump / net console */ static void igb_netpoll(struct net_device *); #endif - #ifdef CONFIG_PCI_IOV -static ssize_t igb_set_num_vfs(struct device *, struct device_attribute *, - const char *, size_t); -static ssize_t igb_show_num_vfs(struct device *, struct device_attribute *, - char *); -DEVICE_ATTR(num_vfs, S_IRUGO | S_IWUSR, igb_show_num_vfs, igb_set_num_vfs); -#endif +static unsigned int max_vfs = 0; +module_param(max_vfs, uint, 0); +MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate " + "per physical function"); +#endif /* CONFIG_PCI_IOV */ + static pci_ers_result_t igb_io_error_detected(struct pci_dev *, pci_channel_state_t); static pci_ers_result_t igb_io_slot_reset(struct pci_dev *); @@ -671,6 +670,21 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter) /* If we can't do MSI-X, try MSI */ msi_only: +#ifdef CONFIG_PCI_IOV + /* disable SR-IOV for non MSI-X configurations */ + if (adapter->vf_data) { + struct e1000_hw *hw = &adapter->hw; + /* disable iov and allow time for transactions to clear */ + pci_disable_sriov(adapter->pdev); + msleep(500); + + kfree(adapter->vf_data); + adapter->vf_data = NULL; + wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ); + msleep(100); + dev_info(&adapter->pdev->dev, "IOV Disabled\n"); + } +#endif adapter->num_rx_queues = 1; adapter->num_tx_queues = 1; if (!pci_enable_msi(adapter->pdev)) @@ -1238,6 +1252,39 @@ static int __devinit igb_probe(struct pci_dev *pdev, if (err) goto err_sw_init; +#ifdef CONFIG_PCI_IOV + /* since iov functionality isn't critical to base device function we + * can accept failure. If it fails we don't allow iov to be enabled */ + if (hw->mac.type == e1000_82576) { + /* 82576 supports a maximum of 7 VFs in addition to the PF */ + unsigned int num_vfs = (max_vfs > 7) ? 7 : max_vfs; + int i; + unsigned char mac_addr[ETH_ALEN]; + + if (num_vfs) + adapter->vf_data = kcalloc(num_vfs, + sizeof(struct vf_data_storage), + GFP_KERNEL); + if (!adapter->vf_data) { + dev_err(&pdev->dev, "Could not allocate VF private " + "data - IOV enable failed\n"); + } else { + err = pci_enable_sriov(pdev, num_vfs); + if (!err) { + adapter->vfs_allocated_count = num_vfs; + dev_info(&pdev->dev, "%d vfs allocated\n", num_vfs); + for (i = 0; i < adapter->vfs_allocated_count; i++) { + random_ether_addr(mac_addr); + igb_set_vf_mac(adapter, i, mac_addr); + } + } else { + kfree(adapter->vf_data); + adapter->vf_data = NULL; + } + } + } + +#endif /* setup the private structure */ err = igb_sw_init(adapter); if (err) @@ -1397,19 +1444,6 @@ static int __devinit igb_probe(struct pci_dev *pdev, if (err) goto err_register; -#ifdef CONFIG_PCI_IOV - /* since iov functionality isn't critical to base device function we - * can accept failure. If it fails we don't allow iov to be enabled */ - if (hw->mac.type == e1000_82576) { - err = pci_enable_sriov(pdev, 0); - if (!err) - err = device_create_file(&netdev->dev, - &dev_attr_num_vfs); - if (err) - dev_err(&pdev->dev, "Failed to initialize IOV\n"); - } - -#endif #ifdef CONFIG_IGB_DCA if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IGB_FLAG_DCA_ENABLED; @@ -5422,89 +5456,4 @@ static void igb_vmm_control(struct igb_adapter *adapter) igb_vmdq_set_replication_pf(hw, true); } -#ifdef CONFIG_PCI_IOV -static ssize_t igb_show_num_vfs(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct igb_adapter *adapter = netdev_priv(to_net_dev(dev)); - - return sprintf(buf, "%d\n", adapter->vfs_allocated_count); -} - -static ssize_t igb_set_num_vfs(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct net_device *netdev = to_net_dev(dev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct pci_dev *pdev = adapter->pdev; - unsigned int num_vfs, i; - unsigned char mac_addr[ETH_ALEN]; - int err; - - sscanf(buf, "%u", &num_vfs); - - if (num_vfs > 7) - num_vfs = 7; - - /* value unchanged do nothing */ - if (num_vfs == adapter->vfs_allocated_count) - return count; - - if (netdev->flags & IFF_UP) - igb_close(netdev); - - igb_reset_interrupt_capability(adapter); - igb_free_queues(adapter); - adapter->tx_ring = NULL; - adapter->rx_ring = NULL; - adapter->vfs_allocated_count = 0; - - /* reclaim resources allocated to VFs since we are changing count */ - if (adapter->vf_data) { - /* disable iov and allow time for transactions to clear */ - pci_disable_sriov(pdev); - msleep(500); - - kfree(adapter->vf_data); - adapter->vf_data = NULL; - wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ); - msleep(100); - dev_info(&pdev->dev, "IOV Disabled\n"); - } - - if (num_vfs) { - adapter->vf_data = kcalloc(num_vfs, - sizeof(struct vf_data_storage), - GFP_KERNEL); - if (!adapter->vf_data) { - dev_err(&pdev->dev, "Could not allocate VF private " - "data - IOV enable failed\n"); - } else { - err = pci_enable_sriov(pdev, num_vfs); - if (!err) { - adapter->vfs_allocated_count = num_vfs; - dev_info(&pdev->dev, "%d vfs allocated\n", num_vfs); - for (i = 0; i < adapter->vfs_allocated_count; i++) { - random_ether_addr(mac_addr); - igb_set_vf_mac(adapter, i, mac_addr); - } - } else { - kfree(adapter->vf_data); - adapter->vf_data = NULL; - } - } - } - - igb_set_interrupt_capability(adapter); - igb_alloc_queues(adapter); - igb_reset(adapter); - - if (netdev->flags & IFF_UP) - igb_open(netdev); - - return count; -} -#endif /* CONFIG_PCI_IOV */ /* igb_main.c */ -- cgit v0.10.2 From 5bf37ec3e0f5eb79f23e024a7fbc8f3557c087f0 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Wed, 8 Apr 2009 16:55:58 -0500 Subject: cap_prctl: don't set error to 0 at 'no_change' One-liner: capsh --print is broken without this patch. In certain cases, cap_prctl returns error > 0 for success. However, the 'no_change' label was always setting error to 0. As a result, for example, 'prctl(CAP_BSET_READ, N)' would always return 0. It should return 1 if a process has N in its bounding set (as by default it does). I'm keeping the no_change label even though it's now functionally the same as 'error'. Signed-off-by: Serge Hallyn Acked-by: David Howells Signed-off-by: James Morris diff --git a/security/commoncap.c b/security/commoncap.c index 7cd61a5..beac025 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -916,7 +916,6 @@ changed: return commit_creds(new); no_change: - error = 0; error: abort_creds(new); return error; -- cgit v0.10.2 From 9c47008d13add50ec4597a8b9eee200c515282c8 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Thu, 9 Apr 2009 00:27:12 +0100 Subject: dm: add integrity support This patch provides support for data integrity passthrough in the device mapper. - If one or more component devices support integrity an integrity profile is preallocated for the DM device. - If all component devices have compatible profiles the DM device is flagged as capable. - Handle integrity metadata when splitting and cloning bios. Signed-off-by: Martin K. Petersen Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index f010965..823ceba 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1047,6 +1047,19 @@ static int populate_table(struct dm_table *table, return dm_table_complete(table); } +static int table_prealloc_integrity(struct dm_table *t, + struct mapped_device *md) +{ + struct list_head *devices = dm_table_get_devices(t); + struct dm_dev_internal *dd; + + list_for_each_entry(dd, devices, list) + if (bdev_get_integrity(dd->dm_dev.bdev)) + return blk_integrity_register(dm_disk(md), NULL); + + return 0; +} + static int table_load(struct dm_ioctl *param, size_t param_size) { int r; @@ -1068,6 +1081,14 @@ static int table_load(struct dm_ioctl *param, size_t param_size) goto out; } + r = table_prealloc_integrity(t, md); + if (r) { + DMERR("%s: could not register integrity profile.", + dm_device_name(md)); + dm_table_destroy(t); + goto out; + } + down_write(&_hash_lock); hc = dm_get_mdptr(md); if (!hc || hc->md != md) { diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index e8361b1..02d0b48 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -879,6 +879,45 @@ struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector) return &t->targets[(KEYS_PER_NODE * n) + k]; } +/* + * Set the integrity profile for this device if all devices used have + * matching profiles. + */ +static void dm_table_set_integrity(struct dm_table *t) +{ + struct list_head *devices = dm_table_get_devices(t); + struct dm_dev_internal *prev = NULL, *dd = NULL; + + if (!blk_get_integrity(dm_disk(t->md))) + return; + + list_for_each_entry(dd, devices, list) { + if (prev && + blk_integrity_compare(prev->dm_dev.bdev->bd_disk, + dd->dm_dev.bdev->bd_disk) < 0) { + DMWARN("%s: integrity not set: %s and %s mismatch", + dm_device_name(t->md), + prev->dm_dev.bdev->bd_disk->disk_name, + dd->dm_dev.bdev->bd_disk->disk_name); + goto no_integrity; + } + prev = dd; + } + + if (!prev || !bdev_get_integrity(prev->dm_dev.bdev)) + goto no_integrity; + + blk_integrity_register(dm_disk(t->md), + bdev_get_integrity(prev->dm_dev.bdev)); + + return; + +no_integrity: + blk_integrity_register(dm_disk(t->md), NULL); + + return; +} + void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q) { /* @@ -899,6 +938,7 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q) else queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q); + dm_table_set_integrity(t); } unsigned int dm_table_get_num_targets(struct dm_table *t) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 788ba96..25d86e2 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -700,6 +700,12 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, clone->bi_io_vec->bv_len = clone->bi_size; clone->bi_flags |= 1 << BIO_CLONED; + if (bio_integrity(bio)) { + bio_integrity_clone(clone, bio, GFP_NOIO); + bio_integrity_trim(clone, + bio_sector_offset(bio, idx, offset), len); + } + return clone; } @@ -721,6 +727,14 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector, clone->bi_size = to_bytes(len); clone->bi_flags &= ~(1 << BIO_SEG_VALID); + if (bio_integrity(bio)) { + bio_integrity_clone(clone, bio, GFP_NOIO); + + if (idx != bio->bi_idx || clone->bi_size < bio->bi_size) + bio_integrity_trim(clone, + bio_sector_offset(bio, idx, 0), len); + } + return clone; } @@ -1193,6 +1207,7 @@ static void free_dev(struct mapped_device *md) mempool_destroy(md->tio_pool); mempool_destroy(md->io_pool); bioset_free(md->bs); + blk_integrity_unregister(md->disk); del_gendisk(md->disk); free_minor(minor); -- cgit v0.10.2 From 692d0eb9e02cf81fb387ff891f53840db2f3110a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 9 Apr 2009 00:27:13 +0100 Subject: dm: remove limited barrier support Prepare for full barrier implementation: first remove the restricted support. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c index bfa107f..79fb53e 100644 --- a/drivers/md/dm-linear.c +++ b/drivers/md/dm-linear.c @@ -142,7 +142,6 @@ static struct target_type linear_target = { .status = linear_status, .ioctl = linear_ioctl, .merge = linear_merge, - .features = DM_TARGET_SUPPORTS_BARRIERS, }; int __init dm_linear_init(void) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 02d0b48..429b50b 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -52,8 +52,6 @@ struct dm_table { sector_t *highs; struct dm_target *targets; - unsigned barriers_supported:1; - /* * Indicates the rw permissions for the new logical * device. This should be a combination of FMODE_READ @@ -243,7 +241,6 @@ int dm_table_create(struct dm_table **result, fmode_t mode, INIT_LIST_HEAD(&t->devices); atomic_set(&t->holders, 0); - t->barriers_supported = 1; if (!num_targets) num_targets = KEYS_PER_NODE; @@ -751,10 +748,6 @@ int dm_table_add_target(struct dm_table *t, const char *type, /* FIXME: the plan is to combine high here and then have * the merge fn apply the target level restrictions. */ combine_restrictions_low(&t->limits, &tgt->limits); - - if (!(tgt->type->features & DM_TARGET_SUPPORTS_BARRIERS)) - t->barriers_supported = 0; - return 0; bad: @@ -799,12 +792,6 @@ int dm_table_complete(struct dm_table *t) check_for_valid_limits(&t->limits); - /* - * We only support barriers if there is exactly one underlying device. - */ - if (!list_is_singular(&t->devices)) - t->barriers_supported = 0; - /* how many indexes will the btree have ? */ leaf_nodes = dm_div_up(t->num_targets, KEYS_PER_NODE); t->depth = 1 + int_log(leaf_nodes, CHILDREN_PER_NODE); @@ -1059,12 +1046,6 @@ struct mapped_device *dm_table_get_md(struct dm_table *t) return t->md; } -int dm_table_barrier_ok(struct dm_table *t) -{ - return t->barriers_supported; -} -EXPORT_SYMBOL(dm_table_barrier_ok); - EXPORT_SYMBOL(dm_vcalloc); EXPORT_SYMBOL(dm_get_device); EXPORT_SYMBOL(dm_put_device); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 25d86e2..ab3b5d8 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -851,11 +851,7 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) bio_io_error(bio); return; } - if (unlikely(bio_barrier(bio) && !dm_table_barrier_ok(ci.map))) { - dm_table_put(ci.map); - bio_endio(bio, -EOPNOTSUPP); - return; - } + ci.md = md; ci.bio = bio; ci.io = alloc_io(md); @@ -937,6 +933,15 @@ static int dm_request(struct request_queue *q, struct bio *bio) struct mapped_device *md = q->queuedata; int cpu; + /* + * There is no use in forwarding any barrier request since we can't + * guarantee it is (or can be) handled by the targets correctly. + */ + if (unlikely(bio_barrier(bio))) { + bio_endio(bio, -EOPNOTSUPP); + return 0; + } + down_read(&md->io_lock); cpu = part_stat_lock(); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index b48397c..a31506d 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -52,7 +52,6 @@ int dm_table_any_congested(struct dm_table *t, int bdi_bits); * To check the return value from dm_table_find_target(). */ #define dm_target_is_valid(t) ((t)->table) -int dm_table_barrier_ok(struct dm_table *t); /*----------------------------------------------------------------- * A registry of target types. diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 66ec05a..ded2d7c 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -116,7 +116,6 @@ void dm_put_device(struct dm_target *ti, struct dm_dev *d); /* * Target features */ -#define DM_TARGET_SUPPORTS_BARRIERS 0x00000001 struct target_type { uint64_t features; -- cgit v0.10.2 From df12ee996378a5917e9555169fe278ecca0612d4 Mon Sep 17 00:00:00 2001 From: Alasdair G Kergon Date: Thu, 9 Apr 2009 00:27:13 +0100 Subject: dm: rearrange dm_wq_work Refactor dm_wq_work() to make later patch more readable. Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm.c b/drivers/md/dm.c index ab3b5d8..020a9e1 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1437,18 +1437,19 @@ static void dm_wq_work(struct work_struct *work) down_write(&md->io_lock); -next_bio: - spin_lock_irq(&md->deferred_lock); - c = bio_list_pop(&md->deferred); - spin_unlock_irq(&md->deferred_lock); + while (1) { + spin_lock_irq(&md->deferred_lock); + c = bio_list_pop(&md->deferred); + spin_unlock_irq(&md->deferred_lock); + + if (!c) { + clear_bit(DMF_BLOCK_IO, &md->flags); + break; + } - if (c) { __split_and_process_bio(md, c); - goto next_bio; } - clear_bit(DMF_BLOCK_IO, &md->flags); - up_write(&md->io_lock); } -- cgit v0.10.2 From 1eb787ec183d1267cac95aae632e92dee05ed50a Mon Sep 17 00:00:00 2001 From: Alasdair G Kergon Date: Thu, 9 Apr 2009 00:27:14 +0100 Subject: dm: split DMF_BLOCK_IO flag into two Split the DMF_BLOCK_IO flag into two. DMF_BLOCK_IO_FOR_SUSPEND is set when I/O must be blocked while suspending a device. DMF_QUEUE_IO_TO_THREAD is set when I/O must be queued to a worker thread for later processing. Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 020a9e1..7cac722 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -89,12 +89,13 @@ union map_info *dm_get_mapinfo(struct bio *bio) /* * Bits for the md->flags field. */ -#define DMF_BLOCK_IO 0 +#define DMF_BLOCK_IO_FOR_SUSPEND 0 #define DMF_SUSPENDED 1 #define DMF_FROZEN 2 #define DMF_FREEING 3 #define DMF_DELETING 4 #define DMF_NOFLUSH_SUSPENDING 5 +#define DMF_QUEUE_IO_TO_THREAD 6 /* * Work processed by per-device workqueue. @@ -439,7 +440,7 @@ static int queue_io(struct mapped_device *md, struct bio *bio) { down_write(&md->io_lock); - if (!test_bit(DMF_BLOCK_IO, &md->flags)) { + if (!test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) { up_write(&md->io_lock); return 1; } @@ -950,10 +951,10 @@ static int dm_request(struct request_queue *q, struct bio *bio) part_stat_unlock(); /* - * If we're suspended we have to queue - * this io for later. + * If we're suspended or the thread is processing barriers + * we have to queue this io for later. */ - while (test_bit(DMF_BLOCK_IO, &md->flags)) { + while (test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) { up_read(&md->io_lock); if (bio_rw(bio) != READA) @@ -997,7 +998,7 @@ static int dm_any_congested(void *congested_data, int bdi_bits) struct mapped_device *md = congested_data; struct dm_table *map; - if (!test_bit(DMF_BLOCK_IO, &md->flags)) { + if (!test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) { map = dm_get_table(md); if (map) { r = dm_table_any_congested(map, bdi_bits); @@ -1443,7 +1444,8 @@ static void dm_wq_work(struct work_struct *work) spin_unlock_irq(&md->deferred_lock); if (!c) { - clear_bit(DMF_BLOCK_IO, &md->flags); + clear_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags); + clear_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags); break; } @@ -1574,10 +1576,12 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) } /* - * First we set the BLOCK_IO flag so no more ios will be mapped. + * First we set the DMF_QUEUE_IO_TO_THREAD flag so no more ios + * will be mapped. */ down_write(&md->io_lock); - set_bit(DMF_BLOCK_IO, &md->flags); + set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags); + set_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags); up_write(&md->io_lock); -- cgit v0.10.2 From 54d9a1b4513b96cbd835ca6866c6a604d194b2ae Mon Sep 17 00:00:00 2001 From: Alasdair G Kergon Date: Thu, 9 Apr 2009 00:27:14 +0100 Subject: dm: simplify dm_request loop Refactor the code in dm_request(). Require the new DMF_BLOCK_FOR_SUSPEND flag on readahead bios we will discard so we don't drop such bios while processing a barrier. Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 7cac722..bb97ec8 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -929,7 +929,6 @@ out: */ static int dm_request(struct request_queue *q, struct bio *bio) { - int r = -EIO; int rw = bio_data_dir(bio); struct mapped_device *md = q->queuedata; int cpu; @@ -957,11 +956,14 @@ static int dm_request(struct request_queue *q, struct bio *bio) while (test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) { up_read(&md->io_lock); - if (bio_rw(bio) != READA) - r = queue_io(md, bio); + if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) && + bio_rw(bio) == READA) { + bio_io_error(bio); + return 0; + } - if (r <= 0) - goto out_req; + if (!queue_io(md, bio)) + return 0; /* * We're in a while loop, because someone could suspend @@ -973,12 +975,6 @@ static int dm_request(struct request_queue *q, struct bio *bio) __split_and_process_bio(md, bio); up_read(&md->io_lock); return 0; - -out_req: - if (r < 0) - bio_io_error(bio); - - return 0; } static void dm_unplug_all(struct request_queue *q) -- cgit v0.10.2 From 3b00b2036fac7a7667d0676a0f80eee575b8c32b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 9 Apr 2009 00:27:15 +0100 Subject: dm: rework queueing and suspension Rework shutting down on suspend and document the associated rules. Drop write lock in __split_and_process_bio to allow more processing concurrency. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm.c b/drivers/md/dm.c index bb97ec8..9746c1e 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1434,18 +1434,21 @@ static void dm_wq_work(struct work_struct *work) down_write(&md->io_lock); - while (1) { + while (!test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) { spin_lock_irq(&md->deferred_lock); c = bio_list_pop(&md->deferred); spin_unlock_irq(&md->deferred_lock); if (!c) { - clear_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags); clear_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags); break; } + up_write(&md->io_lock); + __split_and_process_bio(md, c); + + down_write(&md->io_lock); } up_write(&md->io_lock); @@ -1453,8 +1456,9 @@ static void dm_wq_work(struct work_struct *work) static void dm_queue_flush(struct mapped_device *md) { + clear_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags); + smp_mb__after_clear_bit(); queue_work(md->wq, &md->work); - flush_workqueue(md->wq); } /* @@ -1572,22 +1576,36 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) } /* - * First we set the DMF_QUEUE_IO_TO_THREAD flag so no more ios - * will be mapped. + * Here we must make sure that no processes are submitting requests + * to target drivers i.e. no one may be executing + * __split_and_process_bio. This is called from dm_request and + * dm_wq_work. + * + * To get all processes out of __split_and_process_bio in dm_request, + * we take the write lock. To prevent any process from reentering + * __split_and_process_bio from dm_request, we set + * DMF_QUEUE_IO_TO_THREAD. + * + * To quiesce the thread (dm_wq_work), we set DMF_BLOCK_IO_FOR_SUSPEND + * and call flush_workqueue(md->wq). flush_workqueue will wait until + * dm_wq_work exits and DMF_BLOCK_IO_FOR_SUSPEND will prevent any + * further calls to __split_and_process_bio from dm_wq_work. */ down_write(&md->io_lock); set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags); set_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags); - up_write(&md->io_lock); + flush_workqueue(md->wq); + /* - * Wait for the already-mapped ios to complete. + * At this point no more requests are entering target request routines. + * We call dm_wait_for_completion to wait for all existing requests + * to finish. */ r = dm_wait_for_completion(md, TASK_INTERRUPTIBLE); down_write(&md->io_lock); - if (noflush) clear_bit(DMF_NOFLUSH_SUSPENDING, &md->flags); up_write(&md->io_lock); @@ -1600,6 +1618,12 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) goto out; /* pushback list is already flushed, so skip flush */ } + /* + * If dm_wait_for_completion returned 0, the device is completely + * quiescent now. There is no request-processing activity. All new + * requests are being added to md->deferred list. + */ + dm_table_postsuspend_targets(map); set_bit(DMF_SUSPENDED, &md->flags); -- cgit v0.10.2 From 92c639021ca6e962645114f02e356e7feb131d0b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 9 Apr 2009 00:27:15 +0100 Subject: dm: remove dm_request loop Remove queue_io return value and a loop in dm_request. IO may be submitted to a worker thread with queue_io(). queue_io() sets DMF_QUEUE_IO_TO_THREAD so that all further IO is queued for the thread. When the thread finishes its work, it clears DMF_QUEUE_IO_TO_THREAD and from this point on, requests are submitted from dm_request again. This will be used for processing barriers. Remove the loop in dm_request. queue_io() can submit I/Os to the worker thread even if DMF_QUEUE_IO_TO_THREAD was not set. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 9746c1e..db022e5 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -436,21 +436,18 @@ static void end_io_acct(struct dm_io *io) /* * Add the bio to the list of deferred io. */ -static int queue_io(struct mapped_device *md, struct bio *bio) +static void queue_io(struct mapped_device *md, struct bio *bio) { down_write(&md->io_lock); - if (!test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) { - up_write(&md->io_lock); - return 1; - } - spin_lock_irq(&md->deferred_lock); bio_list_add(&md->deferred, bio); spin_unlock_irq(&md->deferred_lock); + if (!test_and_set_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) + queue_work(md->wq, &md->work); + up_write(&md->io_lock); - return 0; /* deferred successfully */ } /* @@ -953,7 +950,7 @@ static int dm_request(struct request_queue *q, struct bio *bio) * If we're suspended or the thread is processing barriers * we have to queue this io for later. */ - while (test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) { + if (unlikely(test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags))) { up_read(&md->io_lock); if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) && @@ -962,14 +959,9 @@ static int dm_request(struct request_queue *q, struct bio *bio) return 0; } - if (!queue_io(md, bio)) - return 0; + queue_io(md, bio); - /* - * We're in a while loop, because someone could suspend - * before we get to the following read lock. - */ - down_read(&md->io_lock); + return 0; } __split_and_process_bio(md, bio); -- cgit v0.10.2 From af7e466a1acededbc10beaba9eec8531d561c566 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 9 Apr 2009 00:27:16 +0100 Subject: dm: implement basic barrier support Barriers are submitted to a worker thread that issues them in-order. The thread is modified so that when it sees a barrier request it waits for all pending IO before the request then submits the barrier and waits for it. (We must wait, otherwise it could be intermixed with following requests.) Errors from the barrier request are recorded in a per-device barrier_error variable. There may be only one barrier request in progress at once. For now, the barrier request is converted to a non-barrier request when sending it to the underlying device. This patch guarantees correct barrier behavior if the underlying device doesn't perform write-back caching. The same requirement existed before barriers were supported in dm. Bottom layer barrier support (sending barriers by target drivers) and handling devices with write-back caches will be done in further patches. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm.c b/drivers/md/dm.c index db022e5..8a994be 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -125,6 +125,11 @@ struct mapped_device { spinlock_t deferred_lock; /* + * An error from the barrier request currently being processed. + */ + int barrier_error; + + /* * Processing queue (flush/barriers) */ struct workqueue_struct *wq; @@ -425,6 +430,10 @@ static void end_io_acct(struct dm_io *io) part_stat_add(cpu, &dm_disk(md)->part0, ticks[rw], duration); part_stat_unlock(); + /* + * After this is decremented the bio must not be touched if it is + * a barrier. + */ dm_disk(md)->part0.in_flight = pending = atomic_dec_return(&md->pending); @@ -531,25 +540,35 @@ static void dec_pending(struct dm_io *io, int error) */ spin_lock_irqsave(&md->deferred_lock, flags); if (__noflush_suspending(md)) - bio_list_add(&md->deferred, io->bio); + bio_list_add_head(&md->deferred, io->bio); else /* noflush suspend was interrupted. */ io->error = -EIO; spin_unlock_irqrestore(&md->deferred_lock, flags); } - end_io_acct(io); - io_error = io->error; bio = io->bio; - free_io(md, io); + if (bio_barrier(bio)) { + /* + * There can be just one barrier request so we use + * a per-device variable for error reporting. + * Note that you can't touch the bio after end_io_acct + */ + md->barrier_error = io_error; + end_io_acct(io); + } else { + end_io_acct(io); - if (io_error != DM_ENDIO_REQUEUE) { - trace_block_bio_complete(md->queue, bio); + if (io_error != DM_ENDIO_REQUEUE) { + trace_block_bio_complete(md->queue, bio); - bio_endio(bio, io_error); + bio_endio(bio, io_error); + } } + + free_io(md, io); } } @@ -691,7 +710,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, clone->bi_sector = sector; clone->bi_bdev = bio->bi_bdev; - clone->bi_rw = bio->bi_rw; + clone->bi_rw = bio->bi_rw & ~(1 << BIO_RW_BARRIER); clone->bi_vcnt = 1; clone->bi_size = to_bytes(len); clone->bi_io_vec->bv_offset = offset; @@ -718,6 +737,7 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector, clone = bio_alloc_bioset(GFP_NOIO, bio->bi_max_vecs, bs); __bio_clone(clone, bio); + clone->bi_rw &= ~(1 << BIO_RW_BARRIER); clone->bi_destructor = dm_bio_destructor; clone->bi_sector = sector; clone->bi_idx = idx; @@ -846,7 +866,10 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) ci.map = dm_get_table(md); if (unlikely(!ci.map)) { - bio_io_error(bio); + if (!bio_barrier(bio)) + bio_io_error(bio); + else + md->barrier_error = -EIO; return; } @@ -930,15 +953,6 @@ static int dm_request(struct request_queue *q, struct bio *bio) struct mapped_device *md = q->queuedata; int cpu; - /* - * There is no use in forwarding any barrier request since we can't - * guarantee it is (or can be) handled by the targets correctly. - */ - if (unlikely(bio_barrier(bio))) { - bio_endio(bio, -EOPNOTSUPP); - return 0; - } - down_read(&md->io_lock); cpu = part_stat_lock(); @@ -950,7 +964,8 @@ static int dm_request(struct request_queue *q, struct bio *bio) * If we're suspended or the thread is processing barriers * we have to queue this io for later. */ - if (unlikely(test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags))) { + if (unlikely(test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) || + unlikely(bio_barrier(bio))) { up_read(&md->io_lock); if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) && @@ -1415,6 +1430,36 @@ static int dm_wait_for_completion(struct mapped_device *md, int interruptible) return r; } +static int dm_flush(struct mapped_device *md) +{ + dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); + return 0; +} + +static void process_barrier(struct mapped_device *md, struct bio *bio) +{ + int error = dm_flush(md); + + if (unlikely(error)) { + bio_endio(bio, error); + return; + } + if (bio_empty_barrier(bio)) { + bio_endio(bio, 0); + return; + } + + __split_and_process_bio(md, bio); + + error = dm_flush(md); + + if (!error && md->barrier_error) + error = md->barrier_error; + + if (md->barrier_error != DM_ENDIO_REQUEUE) + bio_endio(bio, error); +} + /* * Process the deferred bios */ @@ -1438,7 +1483,10 @@ static void dm_wq_work(struct work_struct *work) up_write(&md->io_lock); - __split_and_process_bio(md, c); + if (bio_barrier(c)) + process_barrier(md, c); + else + __split_and_process_bio(md, c); down_write(&md->io_lock); } -- cgit v0.10.2 From 73830857bca6f6c9dbd48e906daea50bea42d676 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 9 Apr 2009 00:27:16 +0100 Subject: dm kcopyd: prepare for callback race fix Use a variable in segment_complete() to point to the dm_kcopyd_client struct and only release job->pages in run_complete_job() if any are defined. These changes are needed by the next patch. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 0a225da..9d37907 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -297,7 +297,8 @@ static int run_complete_job(struct kcopyd_job *job) dm_kcopyd_notify_fn fn = job->fn; struct dm_kcopyd_client *kc = job->kc; - kcopyd_put_pages(kc, job->pages); + if (job->pages) + kcopyd_put_pages(kc, job->pages); mempool_free(job, kc->job_pool); fn(read_err, write_err, context); @@ -461,6 +462,7 @@ static void segment_complete(int read_err, unsigned long write_err, sector_t progress = 0; sector_t count = 0; struct kcopyd_job *job = (struct kcopyd_job *) context; + struct dm_kcopyd_client *kc = job->kc; mutex_lock(&job->lock); @@ -490,7 +492,7 @@ static void segment_complete(int read_err, unsigned long write_err, if (count) { int i; - struct kcopyd_job *sub_job = mempool_alloc(job->kc->job_pool, + struct kcopyd_job *sub_job = mempool_alloc(kc->job_pool, GFP_NOIO); *sub_job = *job; -- cgit v0.10.2 From 340cd44451fb0bfa542365e6b4b565bbd44836e2 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 9 Apr 2009 00:27:17 +0100 Subject: dm kcopyd: fix callback race If the thread calling dm_kcopyd_copy is delayed due to scheduling inside split_job/segment_complete and the subjobs complete before the loop in split_job completes, the kcopyd callback could be invoked from the thread that called dm_kcopyd_copy instead of the kcopyd workqueue. dm_kcopyd_copy -> split_job -> segment_complete -> job->fn() Snapshots depend on the fact that callbacks are called from the singlethreaded kcopyd workqueue and expect that there is no racing between individual callbacks. The racing between callbacks can lead to corruption of exception store and it can also mean that exception store callbacks are called twice for the same exception - a likely reason for crashes reported inside pending_complete() / remove_exception(). This patch fixes two problems: 1. job->fn being called from the thread that submitted the job (see above). - Fix: hand over the completion callback to the kcopyd thread. 2. job->fn(read_err, write_err, job->context); in segment_complete reports the error of the last subjob, not the union of all errors. - Fix: pass job->write_err to the callback to report all error bits (it is done already in run_complete_job) Cc: stable@kernel.org Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 9d37907..3e3fc06 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -511,13 +511,16 @@ static void segment_complete(int read_err, unsigned long write_err, } else if (atomic_dec_and_test(&job->sub_jobs)) { /* - * To avoid a race we must keep the job around - * until after the notify function has completed. - * Otherwise the client may try and stop the job - * after we've completed. + * Queue the completion callback to the kcopyd thread. + * + * Some callers assume that all the completions are called + * from a single thread and don't race with each other. + * + * We must not call the callback directly here because this + * code may not be executing in the thread. */ - job->fn(read_err, write_err, job->context); - mempool_free(job, job->kc->job_pool); + push(&kc->complete_jobs, job); + wake(kc); } } @@ -530,6 +533,8 @@ static void split_job(struct kcopyd_job *job) { int i; + atomic_inc(&job->kc->nr_jobs); + atomic_set(&job->sub_jobs, SPLIT_COUNT); for (i = 0; i < SPLIT_COUNT; i++) segment_complete(0, 0u, job); -- cgit v0.10.2 From 3217ab97f14c5c8f9f975ed8c40c351164b0b10e Mon Sep 17 00:00:00 2001 From: Vitaliy Gusev Date: Thu, 9 Apr 2009 09:50:35 -0600 Subject: kthread: Don't looking for a task in create_kthread() #2 Remove the unnecessary find_task_by_pid_ns(). kthread() can just use "current" to get the same result. Signed-off-by: Vitaliy Gusev Acked-by: Oleg Nesterov Signed-off-by: Rusty Russell diff --git a/kernel/kthread.c b/kernel/kthread.c index 84bbadd..c013bf0 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -76,6 +76,7 @@ static int kthread(void *_create) /* OK, tell user we're spawned, wait for stop or wakeup */ __set_current_state(TASK_UNINTERRUPTIBLE); + create->result = current; complete(&create->started); schedule(); @@ -101,9 +102,6 @@ static void create_kthread(struct kthread_create_info *create) } else { struct sched_param param = { .sched_priority = 0 }; wait_for_completion(&create->started); - read_lock(&tasklist_lock); - create->result = find_task_by_pid_ns(pid, &init_pid_ns); - read_unlock(&tasklist_lock); /* * root may have changed our (kthreadd's) priority or CPU mask. * The kernel thread should not inherit these properties. -- cgit v0.10.2 From 1c99315bb36b5d776210546d438ca928dc9b1f22 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 9 Apr 2009 09:50:36 -0600 Subject: kthread: move sched-realeted initialization from kthreadd context kthreadd is the single thread which implements ths "create" request, move sched_setscheduler/etc from create_kthread() to kthread_create() to improve the scalability. We should be careful with sched_setscheduler(), use _nochek helper. Signed-off-by: Oleg Nesterov Cc: Christoph Hellwig Cc: "Eric W. Biederman" Cc: Ingo Molnar Cc: Pavel Emelyanov Cc: Vitaliy Gusev Signed-off-by: Rusty Russell diff --git a/kernel/kthread.c b/kernel/kthread.c index c013bf0..4ebaf85 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -97,19 +97,10 @@ static void create_kthread(struct kthread_create_info *create) /* We want our own signal handler (we take no signals by default). */ pid = kernel_thread(kthread, create, CLONE_FS | CLONE_FILES | SIGCHLD); - if (pid < 0) { + if (pid < 0) create->result = ERR_PTR(pid); - } else { - struct sched_param param = { .sched_priority = 0 }; + else wait_for_completion(&create->started); - /* - * root may have changed our (kthreadd's) priority or CPU mask. - * The kernel thread should not inherit these properties. - */ - sched_setscheduler(create->result, SCHED_NORMAL, ¶m); - set_user_nice(create->result, KTHREAD_NICE_LEVEL); - set_cpus_allowed_ptr(create->result, cpu_all_mask); - } complete(&create->done); } @@ -152,11 +143,20 @@ struct task_struct *kthread_create(int (*threadfn)(void *data), wait_for_completion(&create.done); if (!IS_ERR(create.result)) { + struct sched_param param = { .sched_priority = 0 }; va_list args; + va_start(args, namefmt); vsnprintf(create.result->comm, sizeof(create.result->comm), namefmt, args); va_end(args); + /* + * root may have changed our (kthreadd's) priority or CPU mask. + * The kernel thread should not inherit these properties. + */ + sched_setscheduler_nocheck(create.result, SCHED_NORMAL, ¶m); + set_user_nice(create.result, KTHREAD_NICE_LEVEL); + set_cpus_allowed_ptr(create.result, cpu_all_mask); } return create.result; } -- cgit v0.10.2 From 6b44003e5ca66a3fffeb5bc90f40ada2c4340896 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 9 Apr 2009 09:50:37 -0600 Subject: work_on_cpu(): rewrite it to create a kernel thread on demand Impact: circular locking bugfix The various implemetnations and proposed implemetnations of work_on_cpu() are vulnerable to various deadlocks because they all used queues of some form. Unrelated pieces of kernel code thus gained dependencies wherein if one work_on_cpu() caller holds a lock which some other work_on_cpu() callback also takes, the kernel could rarely deadlock. Fix this by creating a short-lived kernel thread for each work_on_cpu() invokation. This is not terribly fast, but the only current caller of work_on_cpu() is pci_call_probe(). It would be nice to find some other way of doing the node-local allocations in the PCI probe code so that we can zap work_on_cpu() altogether. The code there is rather nasty. I can't think of anything simple at this time... Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Rusty Russell diff --git a/kernel/workqueue.c b/kernel/workqueue.c index b6b966c..f71fb2a 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -966,20 +966,20 @@ undo: } #ifdef CONFIG_SMP -static struct workqueue_struct *work_on_cpu_wq __read_mostly; struct work_for_cpu { - struct work_struct work; + struct completion completion; long (*fn)(void *); void *arg; long ret; }; -static void do_work_for_cpu(struct work_struct *w) +static int do_work_for_cpu(void *_wfc) { - struct work_for_cpu *wfc = container_of(w, struct work_for_cpu, work); - + struct work_for_cpu *wfc = _wfc; wfc->ret = wfc->fn(wfc->arg); + complete(&wfc->completion); + return 0; } /** @@ -990,17 +990,23 @@ static void do_work_for_cpu(struct work_struct *w) * * This will return the value @fn returns. * It is up to the caller to ensure that the cpu doesn't go offline. + * The caller must not hold any locks which would prevent @fn from completing. */ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) { - struct work_for_cpu wfc; - - INIT_WORK(&wfc.work, do_work_for_cpu); - wfc.fn = fn; - wfc.arg = arg; - queue_work_on(cpu, work_on_cpu_wq, &wfc.work); - flush_work(&wfc.work); - + struct task_struct *sub_thread; + struct work_for_cpu wfc = { + .completion = COMPLETION_INITIALIZER_ONSTACK(wfc.completion), + .fn = fn, + .arg = arg, + }; + + sub_thread = kthread_create(do_work_for_cpu, &wfc, "work_for_cpu"); + if (IS_ERR(sub_thread)) + return PTR_ERR(sub_thread); + kthread_bind(sub_thread, cpu); + wake_up_process(sub_thread); + wait_for_completion(&wfc.completion); return wfc.ret; } EXPORT_SYMBOL_GPL(work_on_cpu); @@ -1016,8 +1022,4 @@ void __init init_workqueues(void) hotcpu_notifier(workqueue_cpu_callback, 0); keventd_wq = create_workqueue("events"); BUG_ON(!keventd_wq); -#ifdef CONFIG_SMP - work_on_cpu_wq = create_workqueue("work_on_cpu"); - BUG_ON(!work_on_cpu_wq); -#endif } -- cgit v0.10.2 From 3ecb1b7df92393647b13b21b1f7142b65c582511 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 7 Mar 2009 23:48:41 -0800 Subject: xen: add FIX_TEXT_POKE to fixmap FIX_TEXT_POKE[01] are used to map kernel addresses, so they're mapping pfns, not mfns. Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 7ef880c..c3061d3 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1821,6 +1821,9 @@ static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot) #ifdef CONFIG_X86_LOCAL_APIC case FIX_APIC_BASE: /* maps dummy local APIC */ #endif + case FIX_TEXT_POKE0: + case FIX_TEXT_POKE1: + /* All local page mappings */ pte = pfn_pte(phys, prot); break; -- cgit v0.10.2 From 47788c58e66c050982241d9a05eb690daceb05a9 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 8 Apr 2009 20:40:59 +0200 Subject: tracing/syscalls: use a dedicated file header Impact: fix build warnings and possibe compat misbehavior on IA64 Building a kernel on ia64 might trigger these ugly build warnings: CC arch/ia64/ia32/sys_ia32.o In file included from arch/ia64/ia32/sys_ia32.c:55: arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:14, from include/linux/ftrace.h:8, from include/linux/syscalls.h:68, from arch/ia64/ia32/sys_ia32.c:18: arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition [...] sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h to import the syscalls tracing prototypes. But including ftrace.h can pull too much things for a low level file, especially on ia64 where the ia32 private headers conflict with higher level headers. Now we isolate the syscall tracing headers in their own lightweight file. Reported-by: Tony Luck Tested-by: Tony Luck Signed-off-by: Frederic Weisbecker Acked-by: Tony Luck Signed-off-by: Steven Rostedt Cc: Peter Zijlstra Cc: Jason Baron Cc: "Frank Ch. Eigler" Cc: Mathieu Desnoyers Cc: KOSAKI Motohiro Cc: Lai Jiangshan Cc: Jiaying Zhang Cc: Michael Rubin Cc: Martin Bligh Cc: Michael Davidson LKML-Reference: <20090408184058.GB6017@nowhere> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 70a10ca..18dfa30 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -18,6 +18,8 @@ #include #include +#include + #include #include #include diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index fe9345c..23b7c8f 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include @@ -35,6 +34,8 @@ #include #include +#include + #include "tls.h" enum x86_regset { diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index ff112a8..8a0c2f2 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -511,33 +511,4 @@ static inline void trace_hw_branch_oops(void) {} #endif /* CONFIG_HW_BRANCH_TRACER */ -/* - * A syscall entry in the ftrace syscalls array. - * - * @name: name of the syscall - * @nb_args: number of parameters it takes - * @types: list of types as strings - * @args: list of args as strings (args[i] matches types[i]) - */ -struct syscall_metadata { - const char *name; - int nb_args; - const char **types; - const char **args; -}; - -#ifdef CONFIG_FTRACE_SYSCALLS -extern void arch_init_ftrace_syscalls(void); -extern struct syscall_metadata *syscall_nr_to_meta(int nr); -extern void start_ftrace_syscalls(void); -extern void stop_ftrace_syscalls(void); -extern void ftrace_syscall_enter(struct pt_regs *regs); -extern void ftrace_syscall_exit(struct pt_regs *regs); -#else -static inline void start_ftrace_syscalls(void) { } -static inline void stop_ftrace_syscalls(void) { } -static inline void ftrace_syscall_enter(struct pt_regs *regs) { } -static inline void ftrace_syscall_exit(struct pt_regs *regs) { } -#endif - #endif /* _LINUX_FTRACE_H */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 6470f74..dabe4ad 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -65,7 +65,7 @@ struct old_linux_dirent; #include #include #include -#include +#include #define __SC_DECL1(t1, a1) t1 a1 #define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__) diff --git a/include/trace/syscall.h b/include/trace/syscall.h new file mode 100644 index 0000000..8cfe515 --- /dev/null +++ b/include/trace/syscall.h @@ -0,0 +1,35 @@ +#ifndef _TRACE_SYSCALL_H +#define _TRACE_SYSCALL_H + +#include + +/* + * A syscall entry in the ftrace syscalls array. + * + * @name: name of the syscall + * @nb_args: number of parameters it takes + * @types: list of types as strings + * @args: list of args as strings (args[i] matches types[i]) + */ +struct syscall_metadata { + const char *name; + int nb_args; + const char **types; + const char **args; +}; + +#ifdef CONFIG_FTRACE_SYSCALLS +extern void arch_init_ftrace_syscalls(void); +extern struct syscall_metadata *syscall_nr_to_meta(int nr); +extern void start_ftrace_syscalls(void); +extern void stop_ftrace_syscalls(void); +extern void ftrace_syscall_enter(struct pt_regs *regs); +extern void ftrace_syscall_exit(struct pt_regs *regs); +#else +static inline void start_ftrace_syscalls(void) { } +static inline void stop_ftrace_syscalls(void) { } +static inline void ftrace_syscall_enter(struct pt_regs *regs) { } +static inline void ftrace_syscall_exit(struct pt_regs *regs) { } +#endif + +#endif /* _TRACE_SYSCALL_H */ diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c index a2a3af2..5e57964 100644 --- a/kernel/trace/trace_syscalls.c +++ b/kernel/trace/trace_syscalls.c @@ -1,5 +1,5 @@ +#include #include -#include #include #include "trace_output.h" -- cgit v0.10.2 From 9eb85125ce218a8b8d9a7c982510388e227adbec Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 9 Apr 2009 11:19:40 +0800 Subject: blktrace: pass the right pointer to kfree() Impact: fix kfree crash with non-standard act_mask string If passing a string with leading white spaces to strstrip(), the returned ptr != the original ptr. This bug was introduced by me. Signed-off-by: Li Zefan Cc: Jens Axboe Cc: Arnaldo Carvalho de Melo LKML-Reference: <49DD694C.8020902@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index b32ff44..921ef5d 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1377,12 +1377,12 @@ static int blk_trace_str2mask(const char *str) { int i; int mask = 0; - char *s, *token; + char *buf, *s, *token; - s = kstrdup(str, GFP_KERNEL); - if (s == NULL) + buf = kstrdup(str, GFP_KERNEL); + if (buf == NULL) return -ENOMEM; - s = strstrip(s); + s = strstrip(buf); while (1) { token = strsep(&s, ","); @@ -1403,7 +1403,7 @@ static int blk_trace_str2mask(const char *str) break; } } - kfree(s); + kfree(buf); return mask; } -- cgit v0.10.2 From f20ab9c38fb85b4dde8b4139788ab9e735a35279 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Wed, 8 Apr 2009 22:49:46 +0530 Subject: x86: cpu_debug remove execute permission It seems by mistake these files got execute permissions so removing it. Signed-off-by: Jaswinder Singh Rajput LKML-Reference: <1239211186.9037.2.camel@ht.satnam> Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h old mode 100755 new mode 100644 diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c old mode 100755 new mode 100644 -- cgit v0.10.2 From 66bb74888eb4bef4ba7c87c931ecb7ecca3a240c Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 9 Apr 2009 11:40:27 +0800 Subject: tracing: consolidate documents Move kmemtrace.txt, tracepoints.txt, ftrace.txt and mmiotrace.txt to the new trace/ directory. I didnt find any references to those documents in both source files and documents, so no extra work needs to be done. Signed-off-by: Li Zefan Acked-by: Pekka Paalanen Cc: Steven Rostedt Cc: Frederic Weisbecker Cc: Mathieu Desnoyers LKML-Reference: <49DD6E2B.6090200@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt deleted file mode 100644 index fd9a3e6..0000000 --- a/Documentation/ftrace.txt +++ /dev/null @@ -1,1828 +0,0 @@ - ftrace - Function Tracer - ======================== - -Copyright 2008 Red Hat Inc. - Author: Steven Rostedt - License: The GNU Free Documentation License, Version 1.2 - (dual licensed under the GPL v2) -Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, - John Kacur, and David Teigland. - -Written for: 2.6.28-rc2 - -Introduction ------------- - -Ftrace is an internal tracer designed to help out developers and -designers of systems to find what is going on inside the kernel. -It can be used for debugging or analyzing latencies and -performance issues that take place outside of user-space. - -Although ftrace is the function tracer, it also includes an -infrastructure that allows for other types of tracing. Some of -the tracers that are currently in ftrace include a tracer to -trace context switches, the time it takes for a high priority -task to run after it was woken up, the time interrupts are -disabled, and more (ftrace allows for tracer plugins, which -means that the list of tracers can always grow). - - -The File System ---------------- - -Ftrace uses the debugfs file system to hold the control files as -well as the files to display output. - -To mount the debugfs system: - - # mkdir /debug - # mount -t debugfs nodev /debug - -( Note: it is more common to mount at /sys/kernel/debug, but for - simplicity this document will use /debug) - -That's it! (assuming that you have ftrace configured into your kernel) - -After mounting the debugfs, you can see a directory called -"tracing". This directory contains the control and output files -of ftrace. Here is a list of some of the key files: - - - Note: all time values are in microseconds. - - current_tracer: - - This is used to set or display the current tracer - that is configured. - - available_tracers: - - This holds the different types of tracers that - have been compiled into the kernel. The - tracers listed here can be configured by - echoing their name into current_tracer. - - tracing_enabled: - - This sets or displays whether the current_tracer - is activated and tracing or not. Echo 0 into this - file to disable the tracer or 1 to enable it. - - trace: - - This file holds the output of the trace in a human - readable format (described below). - - latency_trace: - - This file shows the same trace but the information - is organized more to display possible latencies - in the system (described below). - - trace_pipe: - - The output is the same as the "trace" file but this - file is meant to be streamed with live tracing. - Reads from this file will block until new data - is retrieved. Unlike the "trace" and "latency_trace" - files, this file is a consumer. This means reading - from this file causes sequential reads to display - more current data. Once data is read from this - file, it is consumed, and will not be read - again with a sequential read. The "trace" and - "latency_trace" files are static, and if the - tracer is not adding more data, they will display - the same information every time they are read. - - trace_options: - - This file lets the user control the amount of data - that is displayed in one of the above output - files. - - tracing_max_latency: - - Some of the tracers record the max latency. - For example, the time interrupts are disabled. - This time is saved in this file. The max trace - will also be stored, and displayed by either - "trace" or "latency_trace". A new max trace will - only be recorded if the latency is greater than - the value in this file. (in microseconds) - - buffer_size_kb: - - This sets or displays the number of kilobytes each CPU - buffer can hold. The tracer buffers are the same size - for each CPU. The displayed number is the size of the - CPU buffer and not total size of all buffers. The - trace buffers are allocated in pages (blocks of memory - that the kernel uses for allocation, usually 4 KB in size). - If the last page allocated has room for more bytes - than requested, the rest of the page will be used, - making the actual allocation bigger than requested. - ( Note, the size may not be a multiple of the page size - due to buffer managment overhead. ) - - This can only be updated when the current_tracer - is set to "nop". - - tracing_cpumask: - - This is a mask that lets the user only trace - on specified CPUS. The format is a hex string - representing the CPUS. - - set_ftrace_filter: - - When dynamic ftrace is configured in (see the - section below "dynamic ftrace"), the code is dynamically - modified (code text rewrite) to disable calling of the - function profiler (mcount). This lets tracing be configured - in with practically no overhead in performance. This also - has a side effect of enabling or disabling specific functions - to be traced. Echoing names of functions into this file - will limit the trace to only those functions. - - set_ftrace_notrace: - - This has an effect opposite to that of - set_ftrace_filter. Any function that is added here will not - be traced. If a function exists in both set_ftrace_filter - and set_ftrace_notrace, the function will _not_ be traced. - - set_ftrace_pid: - - Have the function tracer only trace a single thread. - - set_graph_function: - - Set a "trigger" function where tracing should start - with the function graph tracer (See the section - "dynamic ftrace" for more details). - - available_filter_functions: - - This lists the functions that ftrace - has processed and can trace. These are the function - names that you can pass to "set_ftrace_filter" or - "set_ftrace_notrace". (See the section "dynamic ftrace" - below for more details.) - - -The Tracers ------------ - -Here is the list of current tracers that may be configured. - - "function" - - Function call tracer to trace all kernel functions. - - "function_graph_tracer" - - Similar to the function tracer except that the - function tracer probes the functions on their entry - whereas the function graph tracer traces on both entry - and exit of the functions. It then provides the ability - to draw a graph of function calls similar to C code - source. - - "sched_switch" - - Traces the context switches and wakeups between tasks. - - "irqsoff" - - Traces the areas that disable interrupts and saves - the trace with the longest max latency. - See tracing_max_latency. When a new max is recorded, - it replaces the old trace. It is best to view this - trace via the latency_trace file. - - "preemptoff" - - Similar to irqsoff but traces and records the amount of - time for which preemption is disabled. - - "preemptirqsoff" - - Similar to irqsoff and preemptoff, but traces and - records the largest time for which irqs and/or preemption - is disabled. - - "wakeup" - - Traces and records the max latency that it takes for - the highest priority task to get scheduled after - it has been woken up. - - "hw-branch-tracer" - - Uses the BTS CPU feature on x86 CPUs to traces all - branches executed. - - "nop" - - This is the "trace nothing" tracer. To remove all - tracers from tracing simply echo "nop" into - current_tracer. - - -Examples of using the tracer ----------------------------- - -Here are typical examples of using the tracers when controlling -them only with the debugfs interface (without using any -user-land utilities). - -Output format: --------------- - -Here is an example of the output format of the file "trace" - - -------- -# tracer: function -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-4251 [01] 10152.583854: path_put <-path_walk - bash-4251 [01] 10152.583855: dput <-path_put - bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput - -------- - -A header is printed with the tracer name that is represented by -the trace. In this case the tracer is "function". Then a header -showing the format. Task name "bash", the task PID "4251", the -CPU that it was running on "01", the timestamp in . -format, the function name that was traced "path_put" and the -parent function that called this function "path_walk". The -timestamp is the time at which the function was entered. - -The sched_switch tracer also includes tracing of task wakeups -and context switches. - - ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S - ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S - ksoftirqd/1-7 [01] 1453.070013: 7:115:R ==> 10:115:R - events/1-10 [01] 1453.070013: 10:115:S ==> 2916:115:R - kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R - ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R - -Wake ups are represented by a "+" and the context switches are -shown as "==>". The format is: - - Context switches: - - Previous task Next Task - - :: ==> :: - - Wake ups: - - Current task Task waking up - - :: + :: - -The prio is the internal kernel priority, which is the inverse -of the priority that is usually displayed by user-space tools. -Zero represents the highest priority (99). Prio 100 starts the -"nice" priorities with 100 being equal to nice -20 and 139 being -nice 19. The prio "140" is reserved for the idle task which is -the lowest priority thread (pid 0). - - -Latency trace format --------------------- - -For traces that display latency times, the latency_trace file -gives somewhat more information to see why a latency happened. -Here is a typical trace. - -# tracer: irqsoff -# -irqsoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 97 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: apic_timer_interrupt - => ended at: do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - -0 0d..1 0us+: trace_hardirqs_off_thunk (apic_timer_interrupt) - -0 0d.s. 97us : __do_softirq (do_softirq) - -0 0d.s1 98us : trace_hardirqs_on (do_softirq) - - -This shows that the current tracer is "irqsoff" tracing the time -for which interrupts were disabled. It gives the trace version -and the version of the kernel upon which this was executed on -(2.6.26-rc8). Then it displays the max latency in microsecs (97 -us). The number of trace entries displayed and the total number -recorded (both are three: #3/3). The type of preemption that was -used (PREEMPT). VP, KP, SP, and HP are always zero and are -reserved for later use. #P is the number of online CPUS (#P:2). - -The task is the process that was running when the latency -occurred. (swapper pid: 0). - -The start and stop (the functions in which the interrupts were -disabled and enabled respectively) that caused the latencies: - - apic_timer_interrupt is where the interrupts were disabled. - do_softirq is where they were enabled again. - -The next lines after the header are the trace itself. The header -explains which is which. - - cmd: The name of the process in the trace. - - pid: The PID of that process. - - CPU#: The CPU which the process was running on. - - irqs-off: 'd' interrupts are disabled. '.' otherwise. - Note: If the architecture does not support a way to - read the irq flags variable, an 'X' will always - be printed here. - - need-resched: 'N' task need_resched is set, '.' otherwise. - - hardirq/softirq: - 'H' - hard irq occurred inside a softirq. - 'h' - hard irq is running - 's' - soft irq is running - '.' - normal context. - - preempt-depth: The level of preempt_disabled - -The above is mostly meaningful for kernel developers. - - time: This differs from the trace file output. The trace file output - includes an absolute timestamp. The timestamp used by the - latency_trace file is relative to the start of the trace. - - delay: This is just to help catch your eye a bit better. And - needs to be fixed to be only relative to the same CPU. - The marks are determined by the difference between this - current trace and the next trace. - '!' - greater than preempt_mark_thresh (default 100) - '+' - greater than 1 microsecond - ' ' - less than or equal to 1 microsecond. - - The rest is the same as the 'trace' file. - - -trace_options -------------- - -The trace_options file is used to control what gets printed in -the trace output. To see what is available, simply cat the file: - - cat /debug/tracing/trace_options - print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ - noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj - -To disable one of the options, echo in the option prepended with -"no". - - echo noprint-parent > /debug/tracing/trace_options - -To enable an option, leave off the "no". - - echo sym-offset > /debug/tracing/trace_options - -Here are the available options: - - print-parent - On function traces, display the calling (parent) - function as well as the function being traced. - - print-parent: - bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul - - noprint-parent: - bash-4000 [01] 1477.606694: simple_strtoul - - - sym-offset - Display not only the function name, but also the - offset in the function. For example, instead of - seeing just "ktime_get", you will see - "ktime_get+0xb/0x20". - - sym-offset: - bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0 - - sym-addr - this will also display the function address as well - as the function name. - - sym-addr: - bash-4000 [01] 1477.606694: simple_strtoul - - verbose - This deals with the latency_trace file. - - bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \ - (+0.000ms): simple_strtoul (strict_strtoul) - - raw - This will display raw numbers. This option is best for - use with user applications that can translate the raw - numbers better than having it done in the kernel. - - hex - Similar to raw, but the numbers will be in a hexadecimal - format. - - bin - This will print out the formats in raw binary. - - block - TBD (needs update) - - stacktrace - This is one of the options that changes the trace - itself. When a trace is recorded, so is the stack - of functions. This allows for back traces of - trace sites. - - userstacktrace - This option changes the trace. It records a - stacktrace of the current userspace thread. - - sym-userobj - when user stacktrace are enabled, look up which - object the address belongs to, and print a - relative address. This is especially useful when - ASLR is on, otherwise you don't get a chance to - resolve the address to object/file/line after - the app is no longer running - - The lookup is performed when you read - trace,trace_pipe,latency_trace. Example: - - a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0 -x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] - - sched-tree - trace all tasks that are on the runqueue, at - every scheduling event. Will add overhead if - there's a lot of tasks running at once. - - -sched_switch ------------- - -This tracer simply records schedule switches. Here is an example -of how to use it. - - # echo sched_switch > /debug/tracing/current_tracer - # echo 1 > /debug/tracing/tracing_enabled - # sleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/trace - -# tracer: sched_switch -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-3997 [01] 240.132281: 3997:120:R + 4055:120:R - bash-3997 [01] 240.132284: 3997:120:R ==> 4055:120:R - sleep-4055 [01] 240.132371: 4055:120:S ==> 3997:120:R - bash-3997 [01] 240.132454: 3997:120:R + 4055:120:S - bash-3997 [01] 240.132457: 3997:120:R ==> 4055:120:R - sleep-4055 [01] 240.132460: 4055:120:D ==> 3997:120:R - bash-3997 [01] 240.132463: 3997:120:R + 4055:120:D - bash-3997 [01] 240.132465: 3997:120:R ==> 4055:120:R - -0 [00] 240.132589: 0:140:R + 4:115:S - -0 [00] 240.132591: 0:140:R ==> 4:115:R - ksoftirqd/0-4 [00] 240.132595: 4:115:S ==> 0:140:R - -0 [00] 240.132598: 0:140:R + 4:115:S - -0 [00] 240.132599: 0:140:R ==> 4:115:R - ksoftirqd/0-4 [00] 240.132603: 4:115:S ==> 0:140:R - sleep-4055 [01] 240.133058: 4055:120:S ==> 3997:120:R - [...] - - -As we have discussed previously about this format, the header -shows the name of the trace and points to the options. The -"FUNCTION" is a misnomer since here it represents the wake ups -and context switches. - -The sched_switch file only lists the wake ups (represented with -'+') and context switches ('==>') with the previous task or -current task first followed by the next task or task waking up. -The format for both of these is PID:KERNEL-PRIO:TASK-STATE. -Remember that the KERNEL-PRIO is the inverse of the actual -priority with zero (0) being the highest priority and the nice -values starting at 100 (nice -20). Below is a quick chart to map -the kernel priority to user land priorities. - - Kernel priority: 0 to 99 ==> user RT priority 99 to 0 - Kernel priority: 100 to 139 ==> user nice -20 to 19 - Kernel priority: 140 ==> idle task priority - -The task states are: - - R - running : wants to run, may not actually be running - S - sleep : process is waiting to be woken up (handles signals) - D - disk sleep (uninterruptible sleep) : process must be woken up - (ignores signals) - T - stopped : process suspended - t - traced : process is being traced (with something like gdb) - Z - zombie : process waiting to be cleaned up - X - unknown - - -ftrace_enabled --------------- - -The following tracers (listed below) give different output -depending on whether or not the sysctl ftrace_enabled is set. To -set ftrace_enabled, one can either use the sysctl function or -set it via the proc file system interface. - - sysctl kernel.ftrace_enabled=1 - - or - - echo 1 > /proc/sys/kernel/ftrace_enabled - -To disable ftrace_enabled simply replace the '1' with '0' in the -above commands. - -When ftrace_enabled is set the tracers will also record the -functions that are within the trace. The descriptions of the -tracers will also show an example with ftrace enabled. - - -irqsoff -------- - -When interrupts are disabled, the CPU can not react to any other -external event (besides NMIs and SMIs). This prevents the timer -interrupt from triggering or the mouse interrupt from letting -the kernel know of a new mouse event. The result is a latency -with the reaction time. - -The irqsoff tracer tracks the time for which interrupts are -disabled. When a new maximum latency is hit, the tracer saves -the trace leading up to that latency point so that every time a -new maximum is reached, the old saved trace is discarded and the -new trace is saved. - -To reset the maximum, echo 0 into tracing_max_latency. Here is -an example: - - # echo irqsoff > /debug/tracing/current_tracer - # echo 0 > /debug/tracing/tracing_max_latency - # echo 1 > /debug/tracing/tracing_enabled - # ls -ltr - [...] - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/latency_trace -# tracer: irqsoff -# -irqsoff latency trace v1.1.5 on 2.6.26 --------------------------------------------------------------------- - latency: 12 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: bash-3730 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: sys_setpgid - => ended at: sys_setpgid - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - bash-3730 1d... 0us : _write_lock_irq (sys_setpgid) - bash-3730 1d..1 1us+: _write_unlock_irq (sys_setpgid) - bash-3730 1d..2 14us : trace_hardirqs_on (sys_setpgid) - - -Here we see that that we had a latency of 12 microsecs (which is -very good). The _write_lock_irq in sys_setpgid disabled -interrupts. The difference between the 12 and the displayed -timestamp 14us occurred because the clock was incremented -between the time of recording the max latency and the time of -recording the function that had that latency. - -Note the above example had ftrace_enabled not set. If we set the -ftrace_enabled, we get a much larger output: - -# tracer: irqsoff -# -irqsoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 50 us, #101/101, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: ls-4339 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: __alloc_pages_internal - => ended at: __alloc_pages_internal - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - ls-4339 0...1 0us+: get_page_from_freelist (__alloc_pages_internal) - ls-4339 0d..1 3us : rmqueue_bulk (get_page_from_freelist) - ls-4339 0d..1 3us : _spin_lock (rmqueue_bulk) - ls-4339 0d..1 4us : add_preempt_count (_spin_lock) - ls-4339 0d..2 4us : __rmqueue (rmqueue_bulk) - ls-4339 0d..2 5us : __rmqueue_smallest (__rmqueue) - ls-4339 0d..2 5us : __mod_zone_page_state (__rmqueue_smallest) - ls-4339 0d..2 6us : __rmqueue (rmqueue_bulk) - ls-4339 0d..2 6us : __rmqueue_smallest (__rmqueue) - ls-4339 0d..2 7us : __mod_zone_page_state (__rmqueue_smallest) - ls-4339 0d..2 7us : __rmqueue (rmqueue_bulk) - ls-4339 0d..2 8us : __rmqueue_smallest (__rmqueue) -[...] - ls-4339 0d..2 46us : __rmqueue_smallest (__rmqueue) - ls-4339 0d..2 47us : __mod_zone_page_state (__rmqueue_smallest) - ls-4339 0d..2 47us : __rmqueue (rmqueue_bulk) - ls-4339 0d..2 48us : __rmqueue_smallest (__rmqueue) - ls-4339 0d..2 48us : __mod_zone_page_state (__rmqueue_smallest) - ls-4339 0d..2 49us : _spin_unlock (rmqueue_bulk) - ls-4339 0d..2 49us : sub_preempt_count (_spin_unlock) - ls-4339 0d..1 50us : get_page_from_freelist (__alloc_pages_internal) - ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal) - - - -Here we traced a 50 microsecond latency. But we also see all the -functions that were called during that time. Note that by -enabling function tracing, we incur an added overhead. This -overhead may extend the latency times. But nevertheless, this -trace has provided some very helpful debugging information. - - -preemptoff ----------- - -When preemption is disabled, we may be able to receive -interrupts but the task cannot be preempted and a higher -priority task must wait for preemption to be enabled again -before it can preempt a lower priority task. - -The preemptoff tracer traces the places that disable preemption. -Like the irqsoff tracer, it records the maximum latency for -which preemption was disabled. The control of preemptoff tracer -is much like the irqsoff tracer. - - # echo preemptoff > /debug/tracing/current_tracer - # echo 0 > /debug/tracing/tracing_max_latency - # echo 1 > /debug/tracing/tracing_enabled - # ls -ltr - [...] - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/latency_trace -# tracer: preemptoff -# -preemptoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 29 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: do_IRQ - => ended at: __do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - sshd-4261 0d.h. 0us+: irq_enter (do_IRQ) - sshd-4261 0d.s. 29us : _local_bh_enable (__do_softirq) - sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq) - - -This has some more changes. Preemption was disabled when an -interrupt came in (notice the 'h'), and was enabled while doing -a softirq. (notice the 's'). But we also see that interrupts -have been disabled when entering the preempt off section and -leaving it (the 'd'). We do not know if interrupts were enabled -in the mean time. - -# tracer: preemptoff -# -preemptoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 63 us, #87/87, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: remove_wait_queue - => ended at: __do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - sshd-4261 0d..1 0us : _spin_lock_irqsave (remove_wait_queue) - sshd-4261 0d..1 1us : _spin_unlock_irqrestore (remove_wait_queue) - sshd-4261 0d..1 2us : do_IRQ (common_interrupt) - sshd-4261 0d..1 2us : irq_enter (do_IRQ) - sshd-4261 0d..1 2us : idle_cpu (irq_enter) - sshd-4261 0d..1 3us : add_preempt_count (irq_enter) - sshd-4261 0d.h1 3us : idle_cpu (irq_enter) - sshd-4261 0d.h. 4us : handle_fasteoi_irq (do_IRQ) -[...] - sshd-4261 0d.h. 12us : add_preempt_count (_spin_lock) - sshd-4261 0d.h1 12us : ack_ioapic_quirk_irq (handle_fasteoi_irq) - sshd-4261 0d.h1 13us : move_native_irq (ack_ioapic_quirk_irq) - sshd-4261 0d.h1 13us : _spin_unlock (handle_fasteoi_irq) - sshd-4261 0d.h1 14us : sub_preempt_count (_spin_unlock) - sshd-4261 0d.h1 14us : irq_exit (do_IRQ) - sshd-4261 0d.h1 15us : sub_preempt_count (irq_exit) - sshd-4261 0d..2 15us : do_softirq (irq_exit) - sshd-4261 0d... 15us : __do_softirq (do_softirq) - sshd-4261 0d... 16us : __local_bh_disable (__do_softirq) - sshd-4261 0d... 16us+: add_preempt_count (__local_bh_disable) - sshd-4261 0d.s4 20us : add_preempt_count (__local_bh_disable) - sshd-4261 0d.s4 21us : sub_preempt_count (local_bh_enable) - sshd-4261 0d.s5 21us : sub_preempt_count (local_bh_enable) -[...] - sshd-4261 0d.s6 41us : add_preempt_count (__local_bh_disable) - sshd-4261 0d.s6 42us : sub_preempt_count (local_bh_enable) - sshd-4261 0d.s7 42us : sub_preempt_count (local_bh_enable) - sshd-4261 0d.s5 43us : add_preempt_count (__local_bh_disable) - sshd-4261 0d.s5 43us : sub_preempt_count (local_bh_enable_ip) - sshd-4261 0d.s6 44us : sub_preempt_count (local_bh_enable_ip) - sshd-4261 0d.s5 44us : add_preempt_count (__local_bh_disable) - sshd-4261 0d.s5 45us : sub_preempt_count (local_bh_enable) -[...] - sshd-4261 0d.s. 63us : _local_bh_enable (__do_softirq) - sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq) - - -The above is an example of the preemptoff trace with -ftrace_enabled set. Here we see that interrupts were disabled -the entire time. The irq_enter code lets us know that we entered -an interrupt 'h'. Before that, the functions being traced still -show that it is not in an interrupt, but we can see from the -functions themselves that this is not the case. - -Notice that __do_softirq when called does not have a -preempt_count. It may seem that we missed a preempt enabling. -What really happened is that the preempt count is held on the -thread's stack and we switched to the softirq stack (4K stacks -in effect). The code does not copy the preempt count, but -because interrupts are disabled, we do not need to worry about -it. Having a tracer like this is good for letting people know -what really happens inside the kernel. - - -preemptirqsoff --------------- - -Knowing the locations that have interrupts disabled or -preemption disabled for the longest times is helpful. But -sometimes we would like to know when either preemption and/or -interrupts are disabled. - -Consider the following code: - - local_irq_disable(); - call_function_with_irqs_off(); - preempt_disable(); - call_function_with_irqs_and_preemption_off(); - local_irq_enable(); - call_function_with_preemption_off(); - preempt_enable(); - -The irqsoff tracer will record the total length of -call_function_with_irqs_off() and -call_function_with_irqs_and_preemption_off(). - -The preemptoff tracer will record the total length of -call_function_with_irqs_and_preemption_off() and -call_function_with_preemption_off(). - -But neither will trace the time that interrupts and/or -preemption is disabled. This total time is the time that we can -not schedule. To record this time, use the preemptirqsoff -tracer. - -Again, using this trace is much like the irqsoff and preemptoff -tracers. - - # echo preemptirqsoff > /debug/tracing/current_tracer - # echo 0 > /debug/tracing/tracing_max_latency - # echo 1 > /debug/tracing/tracing_enabled - # ls -ltr - [...] - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/latency_trace -# tracer: preemptirqsoff -# -preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 293 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: ls-4860 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: apic_timer_interrupt - => ended at: __do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - ls-4860 0d... 0us!: trace_hardirqs_off_thunk (apic_timer_interrupt) - ls-4860 0d.s. 294us : _local_bh_enable (__do_softirq) - ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq) - - - -The trace_hardirqs_off_thunk is called from assembly on x86 when -interrupts are disabled in the assembly code. Without the -function tracing, we do not know if interrupts were enabled -within the preemption points. We do see that it started with -preemption enabled. - -Here is a trace with ftrace_enabled set: - - -# tracer: preemptirqsoff -# -preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 105 us, #183/183, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: write_chan - => ended at: __do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - ls-4473 0.N.. 0us : preempt_schedule (write_chan) - ls-4473 0dN.1 1us : _spin_lock (schedule) - ls-4473 0dN.1 2us : add_preempt_count (_spin_lock) - ls-4473 0d..2 2us : put_prev_task_fair (schedule) -[...] - ls-4473 0d..2 13us : set_normalized_timespec (ktime_get_ts) - ls-4473 0d..2 13us : __switch_to (schedule) - sshd-4261 0d..2 14us : finish_task_switch (schedule) - sshd-4261 0d..2 14us : _spin_unlock_irq (finish_task_switch) - sshd-4261 0d..1 15us : add_preempt_count (_spin_lock_irqsave) - sshd-4261 0d..2 16us : _spin_unlock_irqrestore (hrtick_set) - sshd-4261 0d..2 16us : do_IRQ (common_interrupt) - sshd-4261 0d..2 17us : irq_enter (do_IRQ) - sshd-4261 0d..2 17us : idle_cpu (irq_enter) - sshd-4261 0d..2 18us : add_preempt_count (irq_enter) - sshd-4261 0d.h2 18us : idle_cpu (irq_enter) - sshd-4261 0d.h. 18us : handle_fasteoi_irq (do_IRQ) - sshd-4261 0d.h. 19us : _spin_lock (handle_fasteoi_irq) - sshd-4261 0d.h. 19us : add_preempt_count (_spin_lock) - sshd-4261 0d.h1 20us : _spin_unlock (handle_fasteoi_irq) - sshd-4261 0d.h1 20us : sub_preempt_count (_spin_unlock) -[...] - sshd-4261 0d.h1 28us : _spin_unlock (handle_fasteoi_irq) - sshd-4261 0d.h1 29us : sub_preempt_count (_spin_unlock) - sshd-4261 0d.h2 29us : irq_exit (do_IRQ) - sshd-4261 0d.h2 29us : sub_preempt_count (irq_exit) - sshd-4261 0d..3 30us : do_softirq (irq_exit) - sshd-4261 0d... 30us : __do_softirq (do_softirq) - sshd-4261 0d... 31us : __local_bh_disable (__do_softirq) - sshd-4261 0d... 31us+: add_preempt_count (__local_bh_disable) - sshd-4261 0d.s4 34us : add_preempt_count (__local_bh_disable) -[...] - sshd-4261 0d.s3 43us : sub_preempt_count (local_bh_enable_ip) - sshd-4261 0d.s4 44us : sub_preempt_count (local_bh_enable_ip) - sshd-4261 0d.s3 44us : smp_apic_timer_interrupt (apic_timer_interrupt) - sshd-4261 0d.s3 45us : irq_enter (smp_apic_timer_interrupt) - sshd-4261 0d.s3 45us : idle_cpu (irq_enter) - sshd-4261 0d.s3 46us : add_preempt_count (irq_enter) - sshd-4261 0d.H3 46us : idle_cpu (irq_enter) - sshd-4261 0d.H3 47us : hrtimer_interrupt (smp_apic_timer_interrupt) - sshd-4261 0d.H3 47us : ktime_get (hrtimer_interrupt) -[...] - sshd-4261 0d.H3 81us : tick_program_event (hrtimer_interrupt) - sshd-4261 0d.H3 82us : ktime_get (tick_program_event) - sshd-4261 0d.H3 82us : ktime_get_ts (ktime_get) - sshd-4261 0d.H3 83us : getnstimeofday (ktime_get_ts) - sshd-4261 0d.H3 83us : set_normalized_timespec (ktime_get_ts) - sshd-4261 0d.H3 84us : clockevents_program_event (tick_program_event) - sshd-4261 0d.H3 84us : lapic_next_event (clockevents_program_event) - sshd-4261 0d.H3 85us : irq_exit (smp_apic_timer_interrupt) - sshd-4261 0d.H3 85us : sub_preempt_count (irq_exit) - sshd-4261 0d.s4 86us : sub_preempt_count (irq_exit) - sshd-4261 0d.s3 86us : add_preempt_count (__local_bh_disable) -[...] - sshd-4261 0d.s1 98us : sub_preempt_count (net_rx_action) - sshd-4261 0d.s. 99us : add_preempt_count (_spin_lock_irq) - sshd-4261 0d.s1 99us+: _spin_unlock_irq (run_timer_softirq) - sshd-4261 0d.s. 104us : _local_bh_enable (__do_softirq) - sshd-4261 0d.s. 104us : sub_preempt_count (_local_bh_enable) - sshd-4261 0d.s. 105us : _local_bh_enable (__do_softirq) - sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq) - - -This is a very interesting trace. It started with the preemption -of the ls task. We see that the task had the "need_resched" bit -set via the 'N' in the trace. Interrupts were disabled before -the spin_lock at the beginning of the trace. We see that a -schedule took place to run sshd. When the interrupts were -enabled, we took an interrupt. On return from the interrupt -handler, the softirq ran. We took another interrupt while -running the softirq as we see from the capital 'H'. - - -wakeup ------- - -In a Real-Time environment it is very important to know the -wakeup time it takes for the highest priority task that is woken -up to the time that it executes. This is also known as "schedule -latency". I stress the point that this is about RT tasks. It is -also important to know the scheduling latency of non-RT tasks, -but the average schedule latency is better for non-RT tasks. -Tools like LatencyTop are more appropriate for such -measurements. - -Real-Time environments are interested in the worst case latency. -That is the longest latency it takes for something to happen, -and not the average. We can have a very fast scheduler that may -only have a large latency once in a while, but that would not -work well with Real-Time tasks. The wakeup tracer was designed -to record the worst case wakeups of RT tasks. Non-RT tasks are -not recorded because the tracer only records one worst case and -tracing non-RT tasks that are unpredictable will overwrite the -worst case latency of RT tasks. - -Since this tracer only deals with RT tasks, we will run this -slightly differently than we did with the previous tracers. -Instead of performing an 'ls', we will run 'sleep 1' under -'chrt' which changes the priority of the task. - - # echo wakeup > /debug/tracing/current_tracer - # echo 0 > /debug/tracing/tracing_max_latency - # echo 1 > /debug/tracing/tracing_enabled - # chrt -f 5 sleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/latency_trace -# tracer: wakeup -# -wakeup latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 4 us, #2/2, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sleep-4901 (uid:0 nice:0 policy:1 rt_prio:5) - ----------------- - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - -0 1d.h4 0us+: try_to_wake_up (wake_up_process) - -0 1d..4 4us : schedule (cpu_idle) - - -Running this on an idle system, we see that it only took 4 -microseconds to perform the task switch. Note, since the trace -marker in the schedule is before the actual "switch", we stop -the tracing when the recorded task is about to schedule in. This -may change if we add a new marker at the end of the scheduler. - -Notice that the recorded task is 'sleep' with the PID of 4901 -and it has an rt_prio of 5. This priority is user-space priority -and not the internal kernel priority. The policy is 1 for -SCHED_FIFO and 2 for SCHED_RR. - -Doing the same with chrt -r 5 and ftrace_enabled set. - -# tracer: wakeup -# -wakeup latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 50 us, #60/60, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sleep-4068 (uid:0 nice:0 policy:2 rt_prio:5) - ----------------- - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / -ksoftirq-7 1d.H3 0us : try_to_wake_up (wake_up_process) -ksoftirq-7 1d.H4 1us : sub_preempt_count (marker_probe_cb) -ksoftirq-7 1d.H3 2us : check_preempt_wakeup (try_to_wake_up) -ksoftirq-7 1d.H3 3us : update_curr (check_preempt_wakeup) -ksoftirq-7 1d.H3 4us : calc_delta_mine (update_curr) -ksoftirq-7 1d.H3 5us : __resched_task (check_preempt_wakeup) -ksoftirq-7 1d.H3 6us : task_wake_up_rt (try_to_wake_up) -ksoftirq-7 1d.H3 7us : _spin_unlock_irqrestore (try_to_wake_up) -[...] -ksoftirq-7 1d.H2 17us : irq_exit (smp_apic_timer_interrupt) -ksoftirq-7 1d.H2 18us : sub_preempt_count (irq_exit) -ksoftirq-7 1d.s3 19us : sub_preempt_count (irq_exit) -ksoftirq-7 1..s2 20us : rcu_process_callbacks (__do_softirq) -[...] -ksoftirq-7 1..s2 26us : __rcu_process_callbacks (rcu_process_callbacks) -ksoftirq-7 1d.s2 27us : _local_bh_enable (__do_softirq) -ksoftirq-7 1d.s2 28us : sub_preempt_count (_local_bh_enable) -ksoftirq-7 1.N.3 29us : sub_preempt_count (ksoftirqd) -ksoftirq-7 1.N.2 30us : _cond_resched (ksoftirqd) -ksoftirq-7 1.N.2 31us : __cond_resched (_cond_resched) -ksoftirq-7 1.N.2 32us : add_preempt_count (__cond_resched) -ksoftirq-7 1.N.2 33us : schedule (__cond_resched) -ksoftirq-7 1.N.2 33us : add_preempt_count (schedule) -ksoftirq-7 1.N.3 34us : hrtick_clear (schedule) -ksoftirq-7 1dN.3 35us : _spin_lock (schedule) -ksoftirq-7 1dN.3 36us : add_preempt_count (_spin_lock) -ksoftirq-7 1d..4 37us : put_prev_task_fair (schedule) -ksoftirq-7 1d..4 38us : update_curr (put_prev_task_fair) -[...] -ksoftirq-7 1d..5 47us : _spin_trylock (tracing_record_cmdline) -ksoftirq-7 1d..5 48us : add_preempt_count (_spin_trylock) -ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline) -ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock) -ksoftirq-7 1d..4 50us : schedule (__cond_resched) - -The interrupt went off while running ksoftirqd. This task runs -at SCHED_OTHER. Why did not we see the 'N' set early? This may -be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K -stacks configured, the interrupt and softirq run with their own -stack. Some information is held on the top of the task's stack -(need_resched and preempt_count are both stored there). The -setting of the NEED_RESCHED bit is done directly to the task's -stack, but the reading of the NEED_RESCHED is done by looking at -the current stack, which in this case is the stack for the hard -interrupt. This hides the fact that NEED_RESCHED has been set. -We do not see the 'N' until we switch back to the task's -assigned stack. - -function --------- - -This tracer is the function tracer. Enabling the function tracer -can be done from the debug file system. Make sure the -ftrace_enabled is set; otherwise this tracer is a nop. - - # sysctl kernel.ftrace_enabled=1 - # echo function > /debug/tracing/current_tracer - # echo 1 > /debug/tracing/tracing_enabled - # usleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/trace -# tracer: function -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-4003 [00] 123.638713: finish_task_switch <-schedule - bash-4003 [00] 123.638714: _spin_unlock_irq <-finish_task_switch - bash-4003 [00] 123.638714: sub_preempt_count <-_spin_unlock_irq - bash-4003 [00] 123.638715: hrtick_set <-schedule - bash-4003 [00] 123.638715: _spin_lock_irqsave <-hrtick_set - bash-4003 [00] 123.638716: add_preempt_count <-_spin_lock_irqsave - bash-4003 [00] 123.638716: _spin_unlock_irqrestore <-hrtick_set - bash-4003 [00] 123.638717: sub_preempt_count <-_spin_unlock_irqrestore - bash-4003 [00] 123.638717: hrtick_clear <-hrtick_set - bash-4003 [00] 123.638718: sub_preempt_count <-schedule - bash-4003 [00] 123.638718: sub_preempt_count <-preempt_schedule - bash-4003 [00] 123.638719: wait_for_completion <-__stop_machine_run - bash-4003 [00] 123.638719: wait_for_common <-wait_for_completion - bash-4003 [00] 123.638720: _spin_lock_irq <-wait_for_common - bash-4003 [00] 123.638720: add_preempt_count <-_spin_lock_irq -[...] - - -Note: function tracer uses ring buffers to store the above -entries. The newest data may overwrite the oldest data. -Sometimes using echo to stop the trace is not sufficient because -the tracing could have overwritten the data that you wanted to -record. For this reason, it is sometimes better to disable -tracing directly from a program. This allows you to stop the -tracing at the point that you hit the part that you are -interested in. To disable the tracing directly from a C program, -something like following code snippet can be used: - -int trace_fd; -[...] -int main(int argc, char *argv[]) { - [...] - trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY); - [...] - if (condition_hit()) { - write(trace_fd, "0", 1); - } - [...] -} - -Note: Here we hard coded the path name. The debugfs mount is not -guaranteed to be at /debug (and is more commonly at -/sys/kernel/debug). For simple one time traces, the above is -sufficent. For anything else, a search through /proc/mounts may -be needed to find where the debugfs file-system is mounted. - - -Single thread tracing ---------------------- - -By writing into /debug/tracing/set_ftrace_pid you can trace a -single thread. For example: - -# cat /debug/tracing/set_ftrace_pid -no pid -# echo 3111 > /debug/tracing/set_ftrace_pid -# cat /debug/tracing/set_ftrace_pid -3111 -# echo function > /debug/tracing/current_tracer -# cat /debug/tracing/trace | head - # tracer: function - # - # TASK-PID CPU# TIMESTAMP FUNCTION - # | | | | | - yum-updatesd-3111 [003] 1637.254676: finish_task_switch <-thread_return - yum-updatesd-3111 [003] 1637.254681: hrtimer_cancel <-schedule_hrtimeout_range - yum-updatesd-3111 [003] 1637.254682: hrtimer_try_to_cancel <-hrtimer_cancel - yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel - yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll - yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll -# echo -1 > /debug/tracing/set_ftrace_pid -# cat /debug/tracing/trace |head - # tracer: function - # - # TASK-PID CPU# TIMESTAMP FUNCTION - # | | | | | - ##### CPU 3 buffer started #### - yum-updatesd-3111 [003] 1701.957688: free_poll_entry <-poll_freewait - yum-updatesd-3111 [003] 1701.957689: remove_wait_queue <-free_poll_entry - yum-updatesd-3111 [003] 1701.957691: fput <-free_poll_entry - yum-updatesd-3111 [003] 1701.957692: audit_syscall_exit <-sysret_audit - yum-updatesd-3111 [003] 1701.957693: path_put <-audit_syscall_exit - -If you want to trace a function when executing, you could use -something like this simple program: - -#include -#include -#include -#include -#include -#include - -int main (int argc, char **argv) -{ - if (argc < 1) - exit(-1); - - if (fork() > 0) { - int fd, ffd; - char line[64]; - int s; - - ffd = open("/debug/tracing/current_tracer", O_WRONLY); - if (ffd < 0) - exit(-1); - write(ffd, "nop", 3); - - fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY); - s = sprintf(line, "%d\n", getpid()); - write(fd, line, s); - - write(ffd, "function", 8); - - close(fd); - close(ffd); - - execvp(argv[1], argv+1); - } - - return 0; -} - - -hw-branch-tracer (x86 only) ---------------------------- - -This tracer uses the x86 last branch tracing hardware feature to -collect a branch trace on all cpus with relatively low overhead. - -The tracer uses a fixed-size circular buffer per cpu and only -traces ring 0 branches. The trace file dumps that buffer in the -following format: - -# tracer: hw-branch-tracer -# -# CPU# TO <- FROM - 0 scheduler_tick+0xb5/0x1bf <- task_tick_idle+0x5/0x6 - 2 run_posix_cpu_timers+0x2b/0x72a <- run_posix_cpu_timers+0x25/0x72a - 0 scheduler_tick+0x139/0x1bf <- scheduler_tick+0xed/0x1bf - 0 scheduler_tick+0x17c/0x1bf <- scheduler_tick+0x148/0x1bf - 2 run_posix_cpu_timers+0x9e/0x72a <- run_posix_cpu_timers+0x5e/0x72a - 0 scheduler_tick+0x1b6/0x1bf <- scheduler_tick+0x1aa/0x1bf - - -The tracer may be used to dump the trace for the oops'ing cpu on -a kernel oops into the system log. To enable this, -ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one -can either use the sysctl function or set it via the proc system -interface. - - sysctl kernel.ftrace_dump_on_oops=1 - -or - - echo 1 > /proc/sys/kernel/ftrace_dump_on_oops - - -Here's an example of such a dump after a null pointer -dereference in a kernel module: - -[57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 -[57848.106019] IP: [] open+0x6/0x14 [oops] -[57848.106019] PGD 2354e9067 PUD 2375e7067 PMD 0 -[57848.106019] Oops: 0002 [#1] SMP -[57848.106019] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:20:05.0/local_cpus -[57848.106019] Dumping ftrace buffer: -[57848.106019] --------------------------------- -[...] -[57848.106019] 0 chrdev_open+0xe6/0x165 <- cdev_put+0x23/0x24 -[57848.106019] 0 chrdev_open+0x117/0x165 <- chrdev_open+0xfa/0x165 -[57848.106019] 0 chrdev_open+0x120/0x165 <- chrdev_open+0x11c/0x165 -[57848.106019] 0 chrdev_open+0x134/0x165 <- chrdev_open+0x12b/0x165 -[57848.106019] 0 open+0x0/0x14 [oops] <- chrdev_open+0x144/0x165 -[57848.106019] 0 page_fault+0x0/0x30 <- open+0x6/0x14 [oops] -[57848.106019] 0 error_entry+0x0/0x5b <- page_fault+0x4/0x30 -[57848.106019] 0 error_kernelspace+0x0/0x31 <- error_entry+0x59/0x5b -[57848.106019] 0 error_sti+0x0/0x1 <- error_kernelspace+0x2d/0x31 -[57848.106019] 0 page_fault+0x9/0x30 <- error_sti+0x0/0x1 -[57848.106019] 0 do_page_fault+0x0/0x881 <- page_fault+0x1a/0x30 -[...] -[57848.106019] 0 do_page_fault+0x66b/0x881 <- is_prefetch+0x1ee/0x1f2 -[57848.106019] 0 do_page_fault+0x6e0/0x881 <- do_page_fault+0x67a/0x881 -[57848.106019] 0 oops_begin+0x0/0x96 <- do_page_fault+0x6e0/0x881 -[57848.106019] 0 trace_hw_branch_oops+0x0/0x2d <- oops_begin+0x9/0x96 -[...] -[57848.106019] 0 ds_suspend_bts+0x2a/0xe3 <- ds_suspend_bts+0x1a/0xe3 -[57848.106019] --------------------------------- -[57848.106019] CPU 0 -[57848.106019] Modules linked in: oops -[57848.106019] Pid: 5542, comm: cat Tainted: G W 2.6.28 #23 -[57848.106019] RIP: 0010:[] [] open+0x6/0x14 [oops] -[57848.106019] RSP: 0018:ffff880235457d48 EFLAGS: 00010246 -[...] - - -function graph tracer ---------------------------- - -This tracer is similar to the function tracer except that it -probes a function on its entry and its exit. This is done by -using a dynamically allocated stack of return addresses in each -task_struct. On function entry the tracer overwrites the return -address of each function traced to set a custom probe. Thus the -original return address is stored on the stack of return address -in the task_struct. - -Probing on both ends of a function leads to special features -such as: - -- measure of a function's time execution -- having a reliable call stack to draw function calls graph - -This tracer is useful in several situations: - -- you want to find the reason of a strange kernel behavior and - need to see what happens in detail on any areas (or specific - ones). - -- you are experiencing weird latencies but it's difficult to - find its origin. - -- you want to find quickly which path is taken by a specific - function - -- you just want to peek inside a working kernel and want to see - what happens there. - -# tracer: function_graph -# -# CPU DURATION FUNCTION CALLS -# | | | | | | | - - 0) | sys_open() { - 0) | do_sys_open() { - 0) | getname() { - 0) | kmem_cache_alloc() { - 0) 1.382 us | __might_sleep(); - 0) 2.478 us | } - 0) | strncpy_from_user() { - 0) | might_fault() { - 0) 1.389 us | __might_sleep(); - 0) 2.553 us | } - 0) 3.807 us | } - 0) 7.876 us | } - 0) | alloc_fd() { - 0) 0.668 us | _spin_lock(); - 0) 0.570 us | expand_files(); - 0) 0.586 us | _spin_unlock(); - - -There are several columns that can be dynamically -enabled/disabled. You can use every combination of options you -want, depending on your needs. - -- The cpu number on which the function executed is default - enabled. It is sometimes better to only trace one cpu (see - tracing_cpu_mask file) or you might sometimes see unordered - function calls while cpu tracing switch. - - hide: echo nofuncgraph-cpu > /debug/tracing/trace_options - show: echo funcgraph-cpu > /debug/tracing/trace_options - -- The duration (function's time of execution) is displayed on - the closing bracket line of a function or on the same line - than the current function in case of a leaf one. It is default - enabled. - - hide: echo nofuncgraph-duration > /debug/tracing/trace_options - show: echo funcgraph-duration > /debug/tracing/trace_options - -- The overhead field precedes the duration field in case of - reached duration thresholds. - - hide: echo nofuncgraph-overhead > /debug/tracing/trace_options - show: echo funcgraph-overhead > /debug/tracing/trace_options - depends on: funcgraph-duration - - ie: - - 0) | up_write() { - 0) 0.646 us | _spin_lock_irqsave(); - 0) 0.684 us | _spin_unlock_irqrestore(); - 0) 3.123 us | } - 0) 0.548 us | fput(); - 0) + 58.628 us | } - - [...] - - 0) | putname() { - 0) | kmem_cache_free() { - 0) 0.518 us | __phys_addr(); - 0) 1.757 us | } - 0) 2.861 us | } - 0) ! 115.305 us | } - 0) ! 116.402 us | } - - + means that the function exceeded 10 usecs. - ! means that the function exceeded 100 usecs. - - -- The task/pid field displays the thread cmdline and pid which - executed the function. It is default disabled. - - hide: echo nofuncgraph-proc > /debug/tracing/trace_options - show: echo funcgraph-proc > /debug/tracing/trace_options - - ie: - - # tracer: function_graph - # - # CPU TASK/PID DURATION FUNCTION CALLS - # | | | | | | | | | - 0) sh-4802 | | d_free() { - 0) sh-4802 | | call_rcu() { - 0) sh-4802 | | __call_rcu() { - 0) sh-4802 | 0.616 us | rcu_process_gp_end(); - 0) sh-4802 | 0.586 us | check_for_new_grace_period(); - 0) sh-4802 | 2.899 us | } - 0) sh-4802 | 4.040 us | } - 0) sh-4802 | 5.151 us | } - 0) sh-4802 | + 49.370 us | } - - -- The absolute time field is an absolute timestamp given by the - system clock since it started. A snapshot of this time is - given on each entry/exit of functions - - hide: echo nofuncgraph-abstime > /debug/tracing/trace_options - show: echo funcgraph-abstime > /debug/tracing/trace_options - - ie: - - # - # TIME CPU DURATION FUNCTION CALLS - # | | | | | | | | - 360.774522 | 1) 0.541 us | } - 360.774522 | 1) 4.663 us | } - 360.774523 | 1) 0.541 us | __wake_up_bit(); - 360.774524 | 1) 6.796 us | } - 360.774524 | 1) 7.952 us | } - 360.774525 | 1) 9.063 us | } - 360.774525 | 1) 0.615 us | journal_mark_dirty(); - 360.774527 | 1) 0.578 us | __brelse(); - 360.774528 | 1) | reiserfs_prepare_for_journal() { - 360.774528 | 1) | unlock_buffer() { - 360.774529 | 1) | wake_up_bit() { - 360.774529 | 1) | bit_waitqueue() { - 360.774530 | 1) 0.594 us | __phys_addr(); - - -You can put some comments on specific functions by using -trace_printk() For example, if you want to put a comment inside -the __might_sleep() function, you just have to include - and call trace_printk() inside __might_sleep() - -trace_printk("I'm a comment!\n") - -will produce: - - 1) | __might_sleep() { - 1) | /* I'm a comment! */ - 1) 1.449 us | } - - -You might find other useful features for this tracer in the -following "dynamic ftrace" section such as tracing only specific -functions or tasks. - -dynamic ftrace --------------- - -If CONFIG_DYNAMIC_FTRACE is set, the system will run with -virtually no overhead when function tracing is disabled. The way -this works is the mcount function call (placed at the start of -every kernel function, produced by the -pg switch in gcc), -starts of pointing to a simple return. (Enabling FTRACE will -include the -pg switch in the compiling of the kernel.) - -At compile time every C file object is run through the -recordmcount.pl script (located in the scripts directory). This -script will process the C object using objdump to find all the -locations in the .text section that call mcount. (Note, only the -.text section is processed, since processing other sections like -.init.text may cause races due to those sections being freed). - -A new section called "__mcount_loc" is created that holds -references to all the mcount call sites in the .text section. -This section is compiled back into the original object. The -final linker will add all these references into a single table. - -On boot up, before SMP is initialized, the dynamic ftrace code -scans this table and updates all the locations into nops. It -also records the locations, which are added to the -available_filter_functions list. Modules are processed as they -are loaded and before they are executed. When a module is -unloaded, it also removes its functions from the ftrace function -list. This is automatic in the module unload code, and the -module author does not need to worry about it. - -When tracing is enabled, kstop_machine is called to prevent -races with the CPUS executing code being modified (which can -cause the CPU to do undesireable things), and the nops are -patched back to calls. But this time, they do not call mcount -(which is just a function stub). They now call into the ftrace -infrastructure. - -One special side-effect to the recording of the functions being -traced is that we can now selectively choose which functions we -wish to trace and which ones we want the mcount calls to remain -as nops. - -Two files are used, one for enabling and one for disabling the -tracing of specified functions. They are: - - set_ftrace_filter - -and - - set_ftrace_notrace - -A list of available functions that you can add to these files is -listed in: - - available_filter_functions - - # cat /debug/tracing/available_filter_functions -put_prev_task_idle -kmem_cache_create -pick_next_task_rt -get_online_cpus -pick_next_task_fair -mutex_lock -[...] - -If I am only interested in sys_nanosleep and hrtimer_interrupt: - - # echo sys_nanosleep hrtimer_interrupt \ - > /debug/tracing/set_ftrace_filter - # echo ftrace > /debug/tracing/current_tracer - # echo 1 > /debug/tracing/tracing_enabled - # usleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/trace -# tracer: ftrace -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - usleep-4134 [00] 1317.070017: hrtimer_interrupt <-smp_apic_timer_interrupt - usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call - -0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt - -To see which functions are being traced, you can cat the file: - - # cat /debug/tracing/set_ftrace_filter -hrtimer_interrupt -sys_nanosleep - - -Perhaps this is not enough. The filters also allow simple wild -cards. Only the following are currently available - - * - will match functions that begin with - * - will match functions that end with - ** - will match functions that have in it - -These are the only wild cards which are supported. - - * will not work. - -Note: It is better to use quotes to enclose the wild cards, - otherwise the shell may expand the parameters into names - of files in the local directory. - - # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter - -Produces: - -# tracer: ftrace -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-4003 [00] 1480.611794: hrtimer_init <-copy_process - bash-4003 [00] 1480.611941: hrtimer_start <-hrtick_set - bash-4003 [00] 1480.611956: hrtimer_cancel <-hrtick_clear - bash-4003 [00] 1480.611956: hrtimer_try_to_cancel <-hrtimer_cancel - -0 [00] 1480.612019: hrtimer_get_next_event <-get_next_timer_interrupt - -0 [00] 1480.612025: hrtimer_get_next_event <-get_next_timer_interrupt - -0 [00] 1480.612032: hrtimer_get_next_event <-get_next_timer_interrupt - -0 [00] 1480.612037: hrtimer_get_next_event <-get_next_timer_interrupt - -0 [00] 1480.612382: hrtimer_get_next_event <-get_next_timer_interrupt - - -Notice that we lost the sys_nanosleep. - - # cat /debug/tracing/set_ftrace_filter -hrtimer_run_queues -hrtimer_run_pending -hrtimer_init -hrtimer_cancel -hrtimer_try_to_cancel -hrtimer_forward -hrtimer_start -hrtimer_reprogram -hrtimer_force_reprogram -hrtimer_get_next_event -hrtimer_interrupt -hrtimer_nanosleep -hrtimer_wakeup -hrtimer_get_remaining -hrtimer_get_res -hrtimer_init_sleeper - - -This is because the '>' and '>>' act just like they do in bash. -To rewrite the filters, use '>' -To append to the filters, use '>>' - -To clear out a filter so that all functions will be recorded -again: - - # echo > /debug/tracing/set_ftrace_filter - # cat /debug/tracing/set_ftrace_filter - # - -Again, now we want to append. - - # echo sys_nanosleep > /debug/tracing/set_ftrace_filter - # cat /debug/tracing/set_ftrace_filter -sys_nanosleep - # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter - # cat /debug/tracing/set_ftrace_filter -hrtimer_run_queues -hrtimer_run_pending -hrtimer_init -hrtimer_cancel -hrtimer_try_to_cancel -hrtimer_forward -hrtimer_start -hrtimer_reprogram -hrtimer_force_reprogram -hrtimer_get_next_event -hrtimer_interrupt -sys_nanosleep -hrtimer_nanosleep -hrtimer_wakeup -hrtimer_get_remaining -hrtimer_get_res -hrtimer_init_sleeper - - -The set_ftrace_notrace prevents those functions from being -traced. - - # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace - -Produces: - -# tracer: ftrace -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-4043 [01] 115.281644: finish_task_switch <-schedule - bash-4043 [01] 115.281645: hrtick_set <-schedule - bash-4043 [01] 115.281645: hrtick_clear <-hrtick_set - bash-4043 [01] 115.281646: wait_for_completion <-__stop_machine_run - bash-4043 [01] 115.281647: wait_for_common <-wait_for_completion - bash-4043 [01] 115.281647: kthread_stop <-stop_machine_run - bash-4043 [01] 115.281648: init_waitqueue_head <-kthread_stop - bash-4043 [01] 115.281648: wake_up_process <-kthread_stop - bash-4043 [01] 115.281649: try_to_wake_up <-wake_up_process - -We can see that there's no more lock or preempt tracing. - - -Dynamic ftrace with the function graph tracer ---------------------------------------------- - -Although what has been explained above concerns both the -function tracer and the function-graph-tracer, there are some -special features only available in the function-graph tracer. - -If you want to trace only one function and all of its children, -you just have to echo its name into set_graph_function: - - echo __do_fault > set_graph_function - -will produce the following "expanded" trace of the __do_fault() -function: - - 0) | __do_fault() { - 0) | filemap_fault() { - 0) | find_lock_page() { - 0) 0.804 us | find_get_page(); - 0) | __might_sleep() { - 0) 1.329 us | } - 0) 3.904 us | } - 0) 4.979 us | } - 0) 0.653 us | _spin_lock(); - 0) 0.578 us | page_add_file_rmap(); - 0) 0.525 us | native_set_pte_at(); - 0) 0.585 us | _spin_unlock(); - 0) | unlock_page() { - 0) 0.541 us | page_waitqueue(); - 0) 0.639 us | __wake_up_bit(); - 0) 2.786 us | } - 0) + 14.237 us | } - 0) | __do_fault() { - 0) | filemap_fault() { - 0) | find_lock_page() { - 0) 0.698 us | find_get_page(); - 0) | __might_sleep() { - 0) 1.412 us | } - 0) 3.950 us | } - 0) 5.098 us | } - 0) 0.631 us | _spin_lock(); - 0) 0.571 us | page_add_file_rmap(); - 0) 0.526 us | native_set_pte_at(); - 0) 0.586 us | _spin_unlock(); - 0) | unlock_page() { - 0) 0.533 us | page_waitqueue(); - 0) 0.638 us | __wake_up_bit(); - 0) 2.793 us | } - 0) + 14.012 us | } - -You can also expand several functions at once: - - echo sys_open > set_graph_function - echo sys_close >> set_graph_function - -Now if you want to go back to trace all functions you can clear -this special filter via: - - echo > set_graph_function - - -trace_pipe ----------- - -The trace_pipe outputs the same content as the trace file, but -the effect on the tracing is different. Every read from -trace_pipe is consumed. This means that subsequent reads will be -different. The trace is live. - - # echo function > /debug/tracing/current_tracer - # cat /debug/tracing/trace_pipe > /tmp/trace.out & -[1] 4153 - # echo 1 > /debug/tracing/tracing_enabled - # usleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/trace -# tracer: function -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - - # - # cat /tmp/trace.out - bash-4043 [00] 41.267106: finish_task_switch <-schedule - bash-4043 [00] 41.267106: hrtick_set <-schedule - bash-4043 [00] 41.267107: hrtick_clear <-hrtick_set - bash-4043 [00] 41.267108: wait_for_completion <-__stop_machine_run - bash-4043 [00] 41.267108: wait_for_common <-wait_for_completion - bash-4043 [00] 41.267109: kthread_stop <-stop_machine_run - bash-4043 [00] 41.267109: init_waitqueue_head <-kthread_stop - bash-4043 [00] 41.267110: wake_up_process <-kthread_stop - bash-4043 [00] 41.267110: try_to_wake_up <-wake_up_process - bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up - - -Note, reading the trace_pipe file will block until more input is -added. By changing the tracer, trace_pipe will issue an EOF. We -needed to set the function tracer _before_ we "cat" the -trace_pipe file. - - -trace entries -------------- - -Having too much or not enough data can be troublesome in -diagnosing an issue in the kernel. The file buffer_size_kb is -used to modify the size of the internal trace buffers. The -number listed is the number of entries that can be recorded per -CPU. To know the full size, multiply the number of possible CPUS -with the number of entries. - - # cat /debug/tracing/buffer_size_kb -1408 (units kilobytes) - -Note, to modify this, you must have tracing completely disabled. -To do that, echo "nop" into the current_tracer. If the -current_tracer is not set to "nop", an EINVAL error will be -returned. - - # echo nop > /debug/tracing/current_tracer - # echo 10000 > /debug/tracing/buffer_size_kb - # cat /debug/tracing/buffer_size_kb -10000 (units kilobytes) - -The number of pages which will be allocated is limited to a -percentage of available memory. Allocating too much will produce -an error. - - # echo 1000000000000 > /debug/tracing/buffer_size_kb --bash: echo: write error: Cannot allocate memory - # cat /debug/tracing/buffer_size_kb -85 - ------------ - -More details can be found in the source code, in the -kernel/tracing/*.c files. diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt new file mode 100644 index 0000000..fd9a3e6 --- /dev/null +++ b/Documentation/trace/ftrace.txt @@ -0,0 +1,1828 @@ + ftrace - Function Tracer + ======================== + +Copyright 2008 Red Hat Inc. + Author: Steven Rostedt + License: The GNU Free Documentation License, Version 1.2 + (dual licensed under the GPL v2) +Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, + John Kacur, and David Teigland. + +Written for: 2.6.28-rc2 + +Introduction +------------ + +Ftrace is an internal tracer designed to help out developers and +designers of systems to find what is going on inside the kernel. +It can be used for debugging or analyzing latencies and +performance issues that take place outside of user-space. + +Although ftrace is the function tracer, it also includes an +infrastructure that allows for other types of tracing. Some of +the tracers that are currently in ftrace include a tracer to +trace context switches, the time it takes for a high priority +task to run after it was woken up, the time interrupts are +disabled, and more (ftrace allows for tracer plugins, which +means that the list of tracers can always grow). + + +The File System +--------------- + +Ftrace uses the debugfs file system to hold the control files as +well as the files to display output. + +To mount the debugfs system: + + # mkdir /debug + # mount -t debugfs nodev /debug + +( Note: it is more common to mount at /sys/kernel/debug, but for + simplicity this document will use /debug) + +That's it! (assuming that you have ftrace configured into your kernel) + +After mounting the debugfs, you can see a directory called +"tracing". This directory contains the control and output files +of ftrace. Here is a list of some of the key files: + + + Note: all time values are in microseconds. + + current_tracer: + + This is used to set or display the current tracer + that is configured. + + available_tracers: + + This holds the different types of tracers that + have been compiled into the kernel. The + tracers listed here can be configured by + echoing their name into current_tracer. + + tracing_enabled: + + This sets or displays whether the current_tracer + is activated and tracing or not. Echo 0 into this + file to disable the tracer or 1 to enable it. + + trace: + + This file holds the output of the trace in a human + readable format (described below). + + latency_trace: + + This file shows the same trace but the information + is organized more to display possible latencies + in the system (described below). + + trace_pipe: + + The output is the same as the "trace" file but this + file is meant to be streamed with live tracing. + Reads from this file will block until new data + is retrieved. Unlike the "trace" and "latency_trace" + files, this file is a consumer. This means reading + from this file causes sequential reads to display + more current data. Once data is read from this + file, it is consumed, and will not be read + again with a sequential read. The "trace" and + "latency_trace" files are static, and if the + tracer is not adding more data, they will display + the same information every time they are read. + + trace_options: + + This file lets the user control the amount of data + that is displayed in one of the above output + files. + + tracing_max_latency: + + Some of the tracers record the max latency. + For example, the time interrupts are disabled. + This time is saved in this file. The max trace + will also be stored, and displayed by either + "trace" or "latency_trace". A new max trace will + only be recorded if the latency is greater than + the value in this file. (in microseconds) + + buffer_size_kb: + + This sets or displays the number of kilobytes each CPU + buffer can hold. The tracer buffers are the same size + for each CPU. The displayed number is the size of the + CPU buffer and not total size of all buffers. The + trace buffers are allocated in pages (blocks of memory + that the kernel uses for allocation, usually 4 KB in size). + If the last page allocated has room for more bytes + than requested, the rest of the page will be used, + making the actual allocation bigger than requested. + ( Note, the size may not be a multiple of the page size + due to buffer managment overhead. ) + + This can only be updated when the current_tracer + is set to "nop". + + tracing_cpumask: + + This is a mask that lets the user only trace + on specified CPUS. The format is a hex string + representing the CPUS. + + set_ftrace_filter: + + When dynamic ftrace is configured in (see the + section below "dynamic ftrace"), the code is dynamically + modified (code text rewrite) to disable calling of the + function profiler (mcount). This lets tracing be configured + in with practically no overhead in performance. This also + has a side effect of enabling or disabling specific functions + to be traced. Echoing names of functions into this file + will limit the trace to only those functions. + + set_ftrace_notrace: + + This has an effect opposite to that of + set_ftrace_filter. Any function that is added here will not + be traced. If a function exists in both set_ftrace_filter + and set_ftrace_notrace, the function will _not_ be traced. + + set_ftrace_pid: + + Have the function tracer only trace a single thread. + + set_graph_function: + + Set a "trigger" function where tracing should start + with the function graph tracer (See the section + "dynamic ftrace" for more details). + + available_filter_functions: + + This lists the functions that ftrace + has processed and can trace. These are the function + names that you can pass to "set_ftrace_filter" or + "set_ftrace_notrace". (See the section "dynamic ftrace" + below for more details.) + + +The Tracers +----------- + +Here is the list of current tracers that may be configured. + + "function" + + Function call tracer to trace all kernel functions. + + "function_graph_tracer" + + Similar to the function tracer except that the + function tracer probes the functions on their entry + whereas the function graph tracer traces on both entry + and exit of the functions. It then provides the ability + to draw a graph of function calls similar to C code + source. + + "sched_switch" + + Traces the context switches and wakeups between tasks. + + "irqsoff" + + Traces the areas that disable interrupts and saves + the trace with the longest max latency. + See tracing_max_latency. When a new max is recorded, + it replaces the old trace. It is best to view this + trace via the latency_trace file. + + "preemptoff" + + Similar to irqsoff but traces and records the amount of + time for which preemption is disabled. + + "preemptirqsoff" + + Similar to irqsoff and preemptoff, but traces and + records the largest time for which irqs and/or preemption + is disabled. + + "wakeup" + + Traces and records the max latency that it takes for + the highest priority task to get scheduled after + it has been woken up. + + "hw-branch-tracer" + + Uses the BTS CPU feature on x86 CPUs to traces all + branches executed. + + "nop" + + This is the "trace nothing" tracer. To remove all + tracers from tracing simply echo "nop" into + current_tracer. + + +Examples of using the tracer +---------------------------- + +Here are typical examples of using the tracers when controlling +them only with the debugfs interface (without using any +user-land utilities). + +Output format: +-------------- + +Here is an example of the output format of the file "trace" + + -------- +# tracer: function +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-4251 [01] 10152.583854: path_put <-path_walk + bash-4251 [01] 10152.583855: dput <-path_put + bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput + -------- + +A header is printed with the tracer name that is represented by +the trace. In this case the tracer is "function". Then a header +showing the format. Task name "bash", the task PID "4251", the +CPU that it was running on "01", the timestamp in . +format, the function name that was traced "path_put" and the +parent function that called this function "path_walk". The +timestamp is the time at which the function was entered. + +The sched_switch tracer also includes tracing of task wakeups +and context switches. + + ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S + ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S + ksoftirqd/1-7 [01] 1453.070013: 7:115:R ==> 10:115:R + events/1-10 [01] 1453.070013: 10:115:S ==> 2916:115:R + kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R + ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R + +Wake ups are represented by a "+" and the context switches are +shown as "==>". The format is: + + Context switches: + + Previous task Next Task + + :: ==> :: + + Wake ups: + + Current task Task waking up + + :: + :: + +The prio is the internal kernel priority, which is the inverse +of the priority that is usually displayed by user-space tools. +Zero represents the highest priority (99). Prio 100 starts the +"nice" priorities with 100 being equal to nice -20 and 139 being +nice 19. The prio "140" is reserved for the idle task which is +the lowest priority thread (pid 0). + + +Latency trace format +-------------------- + +For traces that display latency times, the latency_trace file +gives somewhat more information to see why a latency happened. +Here is a typical trace. + +# tracer: irqsoff +# +irqsoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 97 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: apic_timer_interrupt + => ended at: do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + -0 0d..1 0us+: trace_hardirqs_off_thunk (apic_timer_interrupt) + -0 0d.s. 97us : __do_softirq (do_softirq) + -0 0d.s1 98us : trace_hardirqs_on (do_softirq) + + +This shows that the current tracer is "irqsoff" tracing the time +for which interrupts were disabled. It gives the trace version +and the version of the kernel upon which this was executed on +(2.6.26-rc8). Then it displays the max latency in microsecs (97 +us). The number of trace entries displayed and the total number +recorded (both are three: #3/3). The type of preemption that was +used (PREEMPT). VP, KP, SP, and HP are always zero and are +reserved for later use. #P is the number of online CPUS (#P:2). + +The task is the process that was running when the latency +occurred. (swapper pid: 0). + +The start and stop (the functions in which the interrupts were +disabled and enabled respectively) that caused the latencies: + + apic_timer_interrupt is where the interrupts were disabled. + do_softirq is where they were enabled again. + +The next lines after the header are the trace itself. The header +explains which is which. + + cmd: The name of the process in the trace. + + pid: The PID of that process. + + CPU#: The CPU which the process was running on. + + irqs-off: 'd' interrupts are disabled. '.' otherwise. + Note: If the architecture does not support a way to + read the irq flags variable, an 'X' will always + be printed here. + + need-resched: 'N' task need_resched is set, '.' otherwise. + + hardirq/softirq: + 'H' - hard irq occurred inside a softirq. + 'h' - hard irq is running + 's' - soft irq is running + '.' - normal context. + + preempt-depth: The level of preempt_disabled + +The above is mostly meaningful for kernel developers. + + time: This differs from the trace file output. The trace file output + includes an absolute timestamp. The timestamp used by the + latency_trace file is relative to the start of the trace. + + delay: This is just to help catch your eye a bit better. And + needs to be fixed to be only relative to the same CPU. + The marks are determined by the difference between this + current trace and the next trace. + '!' - greater than preempt_mark_thresh (default 100) + '+' - greater than 1 microsecond + ' ' - less than or equal to 1 microsecond. + + The rest is the same as the 'trace' file. + + +trace_options +------------- + +The trace_options file is used to control what gets printed in +the trace output. To see what is available, simply cat the file: + + cat /debug/tracing/trace_options + print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ + noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj + +To disable one of the options, echo in the option prepended with +"no". + + echo noprint-parent > /debug/tracing/trace_options + +To enable an option, leave off the "no". + + echo sym-offset > /debug/tracing/trace_options + +Here are the available options: + + print-parent - On function traces, display the calling (parent) + function as well as the function being traced. + + print-parent: + bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul + + noprint-parent: + bash-4000 [01] 1477.606694: simple_strtoul + + + sym-offset - Display not only the function name, but also the + offset in the function. For example, instead of + seeing just "ktime_get", you will see + "ktime_get+0xb/0x20". + + sym-offset: + bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0 + + sym-addr - this will also display the function address as well + as the function name. + + sym-addr: + bash-4000 [01] 1477.606694: simple_strtoul + + verbose - This deals with the latency_trace file. + + bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \ + (+0.000ms): simple_strtoul (strict_strtoul) + + raw - This will display raw numbers. This option is best for + use with user applications that can translate the raw + numbers better than having it done in the kernel. + + hex - Similar to raw, but the numbers will be in a hexadecimal + format. + + bin - This will print out the formats in raw binary. + + block - TBD (needs update) + + stacktrace - This is one of the options that changes the trace + itself. When a trace is recorded, so is the stack + of functions. This allows for back traces of + trace sites. + + userstacktrace - This option changes the trace. It records a + stacktrace of the current userspace thread. + + sym-userobj - when user stacktrace are enabled, look up which + object the address belongs to, and print a + relative address. This is especially useful when + ASLR is on, otherwise you don't get a chance to + resolve the address to object/file/line after + the app is no longer running + + The lookup is performed when you read + trace,trace_pipe,latency_trace. Example: + + a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0 +x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] + + sched-tree - trace all tasks that are on the runqueue, at + every scheduling event. Will add overhead if + there's a lot of tasks running at once. + + +sched_switch +------------ + +This tracer simply records schedule switches. Here is an example +of how to use it. + + # echo sched_switch > /debug/tracing/current_tracer + # echo 1 > /debug/tracing/tracing_enabled + # sleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/trace + +# tracer: sched_switch +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-3997 [01] 240.132281: 3997:120:R + 4055:120:R + bash-3997 [01] 240.132284: 3997:120:R ==> 4055:120:R + sleep-4055 [01] 240.132371: 4055:120:S ==> 3997:120:R + bash-3997 [01] 240.132454: 3997:120:R + 4055:120:S + bash-3997 [01] 240.132457: 3997:120:R ==> 4055:120:R + sleep-4055 [01] 240.132460: 4055:120:D ==> 3997:120:R + bash-3997 [01] 240.132463: 3997:120:R + 4055:120:D + bash-3997 [01] 240.132465: 3997:120:R ==> 4055:120:R + -0 [00] 240.132589: 0:140:R + 4:115:S + -0 [00] 240.132591: 0:140:R ==> 4:115:R + ksoftirqd/0-4 [00] 240.132595: 4:115:S ==> 0:140:R + -0 [00] 240.132598: 0:140:R + 4:115:S + -0 [00] 240.132599: 0:140:R ==> 4:115:R + ksoftirqd/0-4 [00] 240.132603: 4:115:S ==> 0:140:R + sleep-4055 [01] 240.133058: 4055:120:S ==> 3997:120:R + [...] + + +As we have discussed previously about this format, the header +shows the name of the trace and points to the options. The +"FUNCTION" is a misnomer since here it represents the wake ups +and context switches. + +The sched_switch file only lists the wake ups (represented with +'+') and context switches ('==>') with the previous task or +current task first followed by the next task or task waking up. +The format for both of these is PID:KERNEL-PRIO:TASK-STATE. +Remember that the KERNEL-PRIO is the inverse of the actual +priority with zero (0) being the highest priority and the nice +values starting at 100 (nice -20). Below is a quick chart to map +the kernel priority to user land priorities. + + Kernel priority: 0 to 99 ==> user RT priority 99 to 0 + Kernel priority: 100 to 139 ==> user nice -20 to 19 + Kernel priority: 140 ==> idle task priority + +The task states are: + + R - running : wants to run, may not actually be running + S - sleep : process is waiting to be woken up (handles signals) + D - disk sleep (uninterruptible sleep) : process must be woken up + (ignores signals) + T - stopped : process suspended + t - traced : process is being traced (with something like gdb) + Z - zombie : process waiting to be cleaned up + X - unknown + + +ftrace_enabled +-------------- + +The following tracers (listed below) give different output +depending on whether or not the sysctl ftrace_enabled is set. To +set ftrace_enabled, one can either use the sysctl function or +set it via the proc file system interface. + + sysctl kernel.ftrace_enabled=1 + + or + + echo 1 > /proc/sys/kernel/ftrace_enabled + +To disable ftrace_enabled simply replace the '1' with '0' in the +above commands. + +When ftrace_enabled is set the tracers will also record the +functions that are within the trace. The descriptions of the +tracers will also show an example with ftrace enabled. + + +irqsoff +------- + +When interrupts are disabled, the CPU can not react to any other +external event (besides NMIs and SMIs). This prevents the timer +interrupt from triggering or the mouse interrupt from letting +the kernel know of a new mouse event. The result is a latency +with the reaction time. + +The irqsoff tracer tracks the time for which interrupts are +disabled. When a new maximum latency is hit, the tracer saves +the trace leading up to that latency point so that every time a +new maximum is reached, the old saved trace is discarded and the +new trace is saved. + +To reset the maximum, echo 0 into tracing_max_latency. Here is +an example: + + # echo irqsoff > /debug/tracing/current_tracer + # echo 0 > /debug/tracing/tracing_max_latency + # echo 1 > /debug/tracing/tracing_enabled + # ls -ltr + [...] + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/latency_trace +# tracer: irqsoff +# +irqsoff latency trace v1.1.5 on 2.6.26 +-------------------------------------------------------------------- + latency: 12 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: bash-3730 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: sys_setpgid + => ended at: sys_setpgid + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + bash-3730 1d... 0us : _write_lock_irq (sys_setpgid) + bash-3730 1d..1 1us+: _write_unlock_irq (sys_setpgid) + bash-3730 1d..2 14us : trace_hardirqs_on (sys_setpgid) + + +Here we see that that we had a latency of 12 microsecs (which is +very good). The _write_lock_irq in sys_setpgid disabled +interrupts. The difference between the 12 and the displayed +timestamp 14us occurred because the clock was incremented +between the time of recording the max latency and the time of +recording the function that had that latency. + +Note the above example had ftrace_enabled not set. If we set the +ftrace_enabled, we get a much larger output: + +# tracer: irqsoff +# +irqsoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 50 us, #101/101, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: ls-4339 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: __alloc_pages_internal + => ended at: __alloc_pages_internal + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + ls-4339 0...1 0us+: get_page_from_freelist (__alloc_pages_internal) + ls-4339 0d..1 3us : rmqueue_bulk (get_page_from_freelist) + ls-4339 0d..1 3us : _spin_lock (rmqueue_bulk) + ls-4339 0d..1 4us : add_preempt_count (_spin_lock) + ls-4339 0d..2 4us : __rmqueue (rmqueue_bulk) + ls-4339 0d..2 5us : __rmqueue_smallest (__rmqueue) + ls-4339 0d..2 5us : __mod_zone_page_state (__rmqueue_smallest) + ls-4339 0d..2 6us : __rmqueue (rmqueue_bulk) + ls-4339 0d..2 6us : __rmqueue_smallest (__rmqueue) + ls-4339 0d..2 7us : __mod_zone_page_state (__rmqueue_smallest) + ls-4339 0d..2 7us : __rmqueue (rmqueue_bulk) + ls-4339 0d..2 8us : __rmqueue_smallest (__rmqueue) +[...] + ls-4339 0d..2 46us : __rmqueue_smallest (__rmqueue) + ls-4339 0d..2 47us : __mod_zone_page_state (__rmqueue_smallest) + ls-4339 0d..2 47us : __rmqueue (rmqueue_bulk) + ls-4339 0d..2 48us : __rmqueue_smallest (__rmqueue) + ls-4339 0d..2 48us : __mod_zone_page_state (__rmqueue_smallest) + ls-4339 0d..2 49us : _spin_unlock (rmqueue_bulk) + ls-4339 0d..2 49us : sub_preempt_count (_spin_unlock) + ls-4339 0d..1 50us : get_page_from_freelist (__alloc_pages_internal) + ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal) + + + +Here we traced a 50 microsecond latency. But we also see all the +functions that were called during that time. Note that by +enabling function tracing, we incur an added overhead. This +overhead may extend the latency times. But nevertheless, this +trace has provided some very helpful debugging information. + + +preemptoff +---------- + +When preemption is disabled, we may be able to receive +interrupts but the task cannot be preempted and a higher +priority task must wait for preemption to be enabled again +before it can preempt a lower priority task. + +The preemptoff tracer traces the places that disable preemption. +Like the irqsoff tracer, it records the maximum latency for +which preemption was disabled. The control of preemptoff tracer +is much like the irqsoff tracer. + + # echo preemptoff > /debug/tracing/current_tracer + # echo 0 > /debug/tracing/tracing_max_latency + # echo 1 > /debug/tracing/tracing_enabled + # ls -ltr + [...] + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/latency_trace +# tracer: preemptoff +# +preemptoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 29 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: do_IRQ + => ended at: __do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + sshd-4261 0d.h. 0us+: irq_enter (do_IRQ) + sshd-4261 0d.s. 29us : _local_bh_enable (__do_softirq) + sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq) + + +This has some more changes. Preemption was disabled when an +interrupt came in (notice the 'h'), and was enabled while doing +a softirq. (notice the 's'). But we also see that interrupts +have been disabled when entering the preempt off section and +leaving it (the 'd'). We do not know if interrupts were enabled +in the mean time. + +# tracer: preemptoff +# +preemptoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 63 us, #87/87, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: remove_wait_queue + => ended at: __do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + sshd-4261 0d..1 0us : _spin_lock_irqsave (remove_wait_queue) + sshd-4261 0d..1 1us : _spin_unlock_irqrestore (remove_wait_queue) + sshd-4261 0d..1 2us : do_IRQ (common_interrupt) + sshd-4261 0d..1 2us : irq_enter (do_IRQ) + sshd-4261 0d..1 2us : idle_cpu (irq_enter) + sshd-4261 0d..1 3us : add_preempt_count (irq_enter) + sshd-4261 0d.h1 3us : idle_cpu (irq_enter) + sshd-4261 0d.h. 4us : handle_fasteoi_irq (do_IRQ) +[...] + sshd-4261 0d.h. 12us : add_preempt_count (_spin_lock) + sshd-4261 0d.h1 12us : ack_ioapic_quirk_irq (handle_fasteoi_irq) + sshd-4261 0d.h1 13us : move_native_irq (ack_ioapic_quirk_irq) + sshd-4261 0d.h1 13us : _spin_unlock (handle_fasteoi_irq) + sshd-4261 0d.h1 14us : sub_preempt_count (_spin_unlock) + sshd-4261 0d.h1 14us : irq_exit (do_IRQ) + sshd-4261 0d.h1 15us : sub_preempt_count (irq_exit) + sshd-4261 0d..2 15us : do_softirq (irq_exit) + sshd-4261 0d... 15us : __do_softirq (do_softirq) + sshd-4261 0d... 16us : __local_bh_disable (__do_softirq) + sshd-4261 0d... 16us+: add_preempt_count (__local_bh_disable) + sshd-4261 0d.s4 20us : add_preempt_count (__local_bh_disable) + sshd-4261 0d.s4 21us : sub_preempt_count (local_bh_enable) + sshd-4261 0d.s5 21us : sub_preempt_count (local_bh_enable) +[...] + sshd-4261 0d.s6 41us : add_preempt_count (__local_bh_disable) + sshd-4261 0d.s6 42us : sub_preempt_count (local_bh_enable) + sshd-4261 0d.s7 42us : sub_preempt_count (local_bh_enable) + sshd-4261 0d.s5 43us : add_preempt_count (__local_bh_disable) + sshd-4261 0d.s5 43us : sub_preempt_count (local_bh_enable_ip) + sshd-4261 0d.s6 44us : sub_preempt_count (local_bh_enable_ip) + sshd-4261 0d.s5 44us : add_preempt_count (__local_bh_disable) + sshd-4261 0d.s5 45us : sub_preempt_count (local_bh_enable) +[...] + sshd-4261 0d.s. 63us : _local_bh_enable (__do_softirq) + sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq) + + +The above is an example of the preemptoff trace with +ftrace_enabled set. Here we see that interrupts were disabled +the entire time. The irq_enter code lets us know that we entered +an interrupt 'h'. Before that, the functions being traced still +show that it is not in an interrupt, but we can see from the +functions themselves that this is not the case. + +Notice that __do_softirq when called does not have a +preempt_count. It may seem that we missed a preempt enabling. +What really happened is that the preempt count is held on the +thread's stack and we switched to the softirq stack (4K stacks +in effect). The code does not copy the preempt count, but +because interrupts are disabled, we do not need to worry about +it. Having a tracer like this is good for letting people know +what really happens inside the kernel. + + +preemptirqsoff +-------------- + +Knowing the locations that have interrupts disabled or +preemption disabled for the longest times is helpful. But +sometimes we would like to know when either preemption and/or +interrupts are disabled. + +Consider the following code: + + local_irq_disable(); + call_function_with_irqs_off(); + preempt_disable(); + call_function_with_irqs_and_preemption_off(); + local_irq_enable(); + call_function_with_preemption_off(); + preempt_enable(); + +The irqsoff tracer will record the total length of +call_function_with_irqs_off() and +call_function_with_irqs_and_preemption_off(). + +The preemptoff tracer will record the total length of +call_function_with_irqs_and_preemption_off() and +call_function_with_preemption_off(). + +But neither will trace the time that interrupts and/or +preemption is disabled. This total time is the time that we can +not schedule. To record this time, use the preemptirqsoff +tracer. + +Again, using this trace is much like the irqsoff and preemptoff +tracers. + + # echo preemptirqsoff > /debug/tracing/current_tracer + # echo 0 > /debug/tracing/tracing_max_latency + # echo 1 > /debug/tracing/tracing_enabled + # ls -ltr + [...] + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/latency_trace +# tracer: preemptirqsoff +# +preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 293 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: ls-4860 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: apic_timer_interrupt + => ended at: __do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + ls-4860 0d... 0us!: trace_hardirqs_off_thunk (apic_timer_interrupt) + ls-4860 0d.s. 294us : _local_bh_enable (__do_softirq) + ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq) + + + +The trace_hardirqs_off_thunk is called from assembly on x86 when +interrupts are disabled in the assembly code. Without the +function tracing, we do not know if interrupts were enabled +within the preemption points. We do see that it started with +preemption enabled. + +Here is a trace with ftrace_enabled set: + + +# tracer: preemptirqsoff +# +preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 105 us, #183/183, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: write_chan + => ended at: __do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + ls-4473 0.N.. 0us : preempt_schedule (write_chan) + ls-4473 0dN.1 1us : _spin_lock (schedule) + ls-4473 0dN.1 2us : add_preempt_count (_spin_lock) + ls-4473 0d..2 2us : put_prev_task_fair (schedule) +[...] + ls-4473 0d..2 13us : set_normalized_timespec (ktime_get_ts) + ls-4473 0d..2 13us : __switch_to (schedule) + sshd-4261 0d..2 14us : finish_task_switch (schedule) + sshd-4261 0d..2 14us : _spin_unlock_irq (finish_task_switch) + sshd-4261 0d..1 15us : add_preempt_count (_spin_lock_irqsave) + sshd-4261 0d..2 16us : _spin_unlock_irqrestore (hrtick_set) + sshd-4261 0d..2 16us : do_IRQ (common_interrupt) + sshd-4261 0d..2 17us : irq_enter (do_IRQ) + sshd-4261 0d..2 17us : idle_cpu (irq_enter) + sshd-4261 0d..2 18us : add_preempt_count (irq_enter) + sshd-4261 0d.h2 18us : idle_cpu (irq_enter) + sshd-4261 0d.h. 18us : handle_fasteoi_irq (do_IRQ) + sshd-4261 0d.h. 19us : _spin_lock (handle_fasteoi_irq) + sshd-4261 0d.h. 19us : add_preempt_count (_spin_lock) + sshd-4261 0d.h1 20us : _spin_unlock (handle_fasteoi_irq) + sshd-4261 0d.h1 20us : sub_preempt_count (_spin_unlock) +[...] + sshd-4261 0d.h1 28us : _spin_unlock (handle_fasteoi_irq) + sshd-4261 0d.h1 29us : sub_preempt_count (_spin_unlock) + sshd-4261 0d.h2 29us : irq_exit (do_IRQ) + sshd-4261 0d.h2 29us : sub_preempt_count (irq_exit) + sshd-4261 0d..3 30us : do_softirq (irq_exit) + sshd-4261 0d... 30us : __do_softirq (do_softirq) + sshd-4261 0d... 31us : __local_bh_disable (__do_softirq) + sshd-4261 0d... 31us+: add_preempt_count (__local_bh_disable) + sshd-4261 0d.s4 34us : add_preempt_count (__local_bh_disable) +[...] + sshd-4261 0d.s3 43us : sub_preempt_count (local_bh_enable_ip) + sshd-4261 0d.s4 44us : sub_preempt_count (local_bh_enable_ip) + sshd-4261 0d.s3 44us : smp_apic_timer_interrupt (apic_timer_interrupt) + sshd-4261 0d.s3 45us : irq_enter (smp_apic_timer_interrupt) + sshd-4261 0d.s3 45us : idle_cpu (irq_enter) + sshd-4261 0d.s3 46us : add_preempt_count (irq_enter) + sshd-4261 0d.H3 46us : idle_cpu (irq_enter) + sshd-4261 0d.H3 47us : hrtimer_interrupt (smp_apic_timer_interrupt) + sshd-4261 0d.H3 47us : ktime_get (hrtimer_interrupt) +[...] + sshd-4261 0d.H3 81us : tick_program_event (hrtimer_interrupt) + sshd-4261 0d.H3 82us : ktime_get (tick_program_event) + sshd-4261 0d.H3 82us : ktime_get_ts (ktime_get) + sshd-4261 0d.H3 83us : getnstimeofday (ktime_get_ts) + sshd-4261 0d.H3 83us : set_normalized_timespec (ktime_get_ts) + sshd-4261 0d.H3 84us : clockevents_program_event (tick_program_event) + sshd-4261 0d.H3 84us : lapic_next_event (clockevents_program_event) + sshd-4261 0d.H3 85us : irq_exit (smp_apic_timer_interrupt) + sshd-4261 0d.H3 85us : sub_preempt_count (irq_exit) + sshd-4261 0d.s4 86us : sub_preempt_count (irq_exit) + sshd-4261 0d.s3 86us : add_preempt_count (__local_bh_disable) +[...] + sshd-4261 0d.s1 98us : sub_preempt_count (net_rx_action) + sshd-4261 0d.s. 99us : add_preempt_count (_spin_lock_irq) + sshd-4261 0d.s1 99us+: _spin_unlock_irq (run_timer_softirq) + sshd-4261 0d.s. 104us : _local_bh_enable (__do_softirq) + sshd-4261 0d.s. 104us : sub_preempt_count (_local_bh_enable) + sshd-4261 0d.s. 105us : _local_bh_enable (__do_softirq) + sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq) + + +This is a very interesting trace. It started with the preemption +of the ls task. We see that the task had the "need_resched" bit +set via the 'N' in the trace. Interrupts were disabled before +the spin_lock at the beginning of the trace. We see that a +schedule took place to run sshd. When the interrupts were +enabled, we took an interrupt. On return from the interrupt +handler, the softirq ran. We took another interrupt while +running the softirq as we see from the capital 'H'. + + +wakeup +------ + +In a Real-Time environment it is very important to know the +wakeup time it takes for the highest priority task that is woken +up to the time that it executes. This is also known as "schedule +latency". I stress the point that this is about RT tasks. It is +also important to know the scheduling latency of non-RT tasks, +but the average schedule latency is better for non-RT tasks. +Tools like LatencyTop are more appropriate for such +measurements. + +Real-Time environments are interested in the worst case latency. +That is the longest latency it takes for something to happen, +and not the average. We can have a very fast scheduler that may +only have a large latency once in a while, but that would not +work well with Real-Time tasks. The wakeup tracer was designed +to record the worst case wakeups of RT tasks. Non-RT tasks are +not recorded because the tracer only records one worst case and +tracing non-RT tasks that are unpredictable will overwrite the +worst case latency of RT tasks. + +Since this tracer only deals with RT tasks, we will run this +slightly differently than we did with the previous tracers. +Instead of performing an 'ls', we will run 'sleep 1' under +'chrt' which changes the priority of the task. + + # echo wakeup > /debug/tracing/current_tracer + # echo 0 > /debug/tracing/tracing_max_latency + # echo 1 > /debug/tracing/tracing_enabled + # chrt -f 5 sleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/latency_trace +# tracer: wakeup +# +wakeup latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 4 us, #2/2, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sleep-4901 (uid:0 nice:0 policy:1 rt_prio:5) + ----------------- + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + -0 1d.h4 0us+: try_to_wake_up (wake_up_process) + -0 1d..4 4us : schedule (cpu_idle) + + +Running this on an idle system, we see that it only took 4 +microseconds to perform the task switch. Note, since the trace +marker in the schedule is before the actual "switch", we stop +the tracing when the recorded task is about to schedule in. This +may change if we add a new marker at the end of the scheduler. + +Notice that the recorded task is 'sleep' with the PID of 4901 +and it has an rt_prio of 5. This priority is user-space priority +and not the internal kernel priority. The policy is 1 for +SCHED_FIFO and 2 for SCHED_RR. + +Doing the same with chrt -r 5 and ftrace_enabled set. + +# tracer: wakeup +# +wakeup latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 50 us, #60/60, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sleep-4068 (uid:0 nice:0 policy:2 rt_prio:5) + ----------------- + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / +ksoftirq-7 1d.H3 0us : try_to_wake_up (wake_up_process) +ksoftirq-7 1d.H4 1us : sub_preempt_count (marker_probe_cb) +ksoftirq-7 1d.H3 2us : check_preempt_wakeup (try_to_wake_up) +ksoftirq-7 1d.H3 3us : update_curr (check_preempt_wakeup) +ksoftirq-7 1d.H3 4us : calc_delta_mine (update_curr) +ksoftirq-7 1d.H3 5us : __resched_task (check_preempt_wakeup) +ksoftirq-7 1d.H3 6us : task_wake_up_rt (try_to_wake_up) +ksoftirq-7 1d.H3 7us : _spin_unlock_irqrestore (try_to_wake_up) +[...] +ksoftirq-7 1d.H2 17us : irq_exit (smp_apic_timer_interrupt) +ksoftirq-7 1d.H2 18us : sub_preempt_count (irq_exit) +ksoftirq-7 1d.s3 19us : sub_preempt_count (irq_exit) +ksoftirq-7 1..s2 20us : rcu_process_callbacks (__do_softirq) +[...] +ksoftirq-7 1..s2 26us : __rcu_process_callbacks (rcu_process_callbacks) +ksoftirq-7 1d.s2 27us : _local_bh_enable (__do_softirq) +ksoftirq-7 1d.s2 28us : sub_preempt_count (_local_bh_enable) +ksoftirq-7 1.N.3 29us : sub_preempt_count (ksoftirqd) +ksoftirq-7 1.N.2 30us : _cond_resched (ksoftirqd) +ksoftirq-7 1.N.2 31us : __cond_resched (_cond_resched) +ksoftirq-7 1.N.2 32us : add_preempt_count (__cond_resched) +ksoftirq-7 1.N.2 33us : schedule (__cond_resched) +ksoftirq-7 1.N.2 33us : add_preempt_count (schedule) +ksoftirq-7 1.N.3 34us : hrtick_clear (schedule) +ksoftirq-7 1dN.3 35us : _spin_lock (schedule) +ksoftirq-7 1dN.3 36us : add_preempt_count (_spin_lock) +ksoftirq-7 1d..4 37us : put_prev_task_fair (schedule) +ksoftirq-7 1d..4 38us : update_curr (put_prev_task_fair) +[...] +ksoftirq-7 1d..5 47us : _spin_trylock (tracing_record_cmdline) +ksoftirq-7 1d..5 48us : add_preempt_count (_spin_trylock) +ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline) +ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock) +ksoftirq-7 1d..4 50us : schedule (__cond_resched) + +The interrupt went off while running ksoftirqd. This task runs +at SCHED_OTHER. Why did not we see the 'N' set early? This may +be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K +stacks configured, the interrupt and softirq run with their own +stack. Some information is held on the top of the task's stack +(need_resched and preempt_count are both stored there). The +setting of the NEED_RESCHED bit is done directly to the task's +stack, but the reading of the NEED_RESCHED is done by looking at +the current stack, which in this case is the stack for the hard +interrupt. This hides the fact that NEED_RESCHED has been set. +We do not see the 'N' until we switch back to the task's +assigned stack. + +function +-------- + +This tracer is the function tracer. Enabling the function tracer +can be done from the debug file system. Make sure the +ftrace_enabled is set; otherwise this tracer is a nop. + + # sysctl kernel.ftrace_enabled=1 + # echo function > /debug/tracing/current_tracer + # echo 1 > /debug/tracing/tracing_enabled + # usleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/trace +# tracer: function +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-4003 [00] 123.638713: finish_task_switch <-schedule + bash-4003 [00] 123.638714: _spin_unlock_irq <-finish_task_switch + bash-4003 [00] 123.638714: sub_preempt_count <-_spin_unlock_irq + bash-4003 [00] 123.638715: hrtick_set <-schedule + bash-4003 [00] 123.638715: _spin_lock_irqsave <-hrtick_set + bash-4003 [00] 123.638716: add_preempt_count <-_spin_lock_irqsave + bash-4003 [00] 123.638716: _spin_unlock_irqrestore <-hrtick_set + bash-4003 [00] 123.638717: sub_preempt_count <-_spin_unlock_irqrestore + bash-4003 [00] 123.638717: hrtick_clear <-hrtick_set + bash-4003 [00] 123.638718: sub_preempt_count <-schedule + bash-4003 [00] 123.638718: sub_preempt_count <-preempt_schedule + bash-4003 [00] 123.638719: wait_for_completion <-__stop_machine_run + bash-4003 [00] 123.638719: wait_for_common <-wait_for_completion + bash-4003 [00] 123.638720: _spin_lock_irq <-wait_for_common + bash-4003 [00] 123.638720: add_preempt_count <-_spin_lock_irq +[...] + + +Note: function tracer uses ring buffers to store the above +entries. The newest data may overwrite the oldest data. +Sometimes using echo to stop the trace is not sufficient because +the tracing could have overwritten the data that you wanted to +record. For this reason, it is sometimes better to disable +tracing directly from a program. This allows you to stop the +tracing at the point that you hit the part that you are +interested in. To disable the tracing directly from a C program, +something like following code snippet can be used: + +int trace_fd; +[...] +int main(int argc, char *argv[]) { + [...] + trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY); + [...] + if (condition_hit()) { + write(trace_fd, "0", 1); + } + [...] +} + +Note: Here we hard coded the path name. The debugfs mount is not +guaranteed to be at /debug (and is more commonly at +/sys/kernel/debug). For simple one time traces, the above is +sufficent. For anything else, a search through /proc/mounts may +be needed to find where the debugfs file-system is mounted. + + +Single thread tracing +--------------------- + +By writing into /debug/tracing/set_ftrace_pid you can trace a +single thread. For example: + +# cat /debug/tracing/set_ftrace_pid +no pid +# echo 3111 > /debug/tracing/set_ftrace_pid +# cat /debug/tracing/set_ftrace_pid +3111 +# echo function > /debug/tracing/current_tracer +# cat /debug/tracing/trace | head + # tracer: function + # + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + yum-updatesd-3111 [003] 1637.254676: finish_task_switch <-thread_return + yum-updatesd-3111 [003] 1637.254681: hrtimer_cancel <-schedule_hrtimeout_range + yum-updatesd-3111 [003] 1637.254682: hrtimer_try_to_cancel <-hrtimer_cancel + yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel + yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll + yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll +# echo -1 > /debug/tracing/set_ftrace_pid +# cat /debug/tracing/trace |head + # tracer: function + # + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + ##### CPU 3 buffer started #### + yum-updatesd-3111 [003] 1701.957688: free_poll_entry <-poll_freewait + yum-updatesd-3111 [003] 1701.957689: remove_wait_queue <-free_poll_entry + yum-updatesd-3111 [003] 1701.957691: fput <-free_poll_entry + yum-updatesd-3111 [003] 1701.957692: audit_syscall_exit <-sysret_audit + yum-updatesd-3111 [003] 1701.957693: path_put <-audit_syscall_exit + +If you want to trace a function when executing, you could use +something like this simple program: + +#include +#include +#include +#include +#include +#include + +int main (int argc, char **argv) +{ + if (argc < 1) + exit(-1); + + if (fork() > 0) { + int fd, ffd; + char line[64]; + int s; + + ffd = open("/debug/tracing/current_tracer", O_WRONLY); + if (ffd < 0) + exit(-1); + write(ffd, "nop", 3); + + fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY); + s = sprintf(line, "%d\n", getpid()); + write(fd, line, s); + + write(ffd, "function", 8); + + close(fd); + close(ffd); + + execvp(argv[1], argv+1); + } + + return 0; +} + + +hw-branch-tracer (x86 only) +--------------------------- + +This tracer uses the x86 last branch tracing hardware feature to +collect a branch trace on all cpus with relatively low overhead. + +The tracer uses a fixed-size circular buffer per cpu and only +traces ring 0 branches. The trace file dumps that buffer in the +following format: + +# tracer: hw-branch-tracer +# +# CPU# TO <- FROM + 0 scheduler_tick+0xb5/0x1bf <- task_tick_idle+0x5/0x6 + 2 run_posix_cpu_timers+0x2b/0x72a <- run_posix_cpu_timers+0x25/0x72a + 0 scheduler_tick+0x139/0x1bf <- scheduler_tick+0xed/0x1bf + 0 scheduler_tick+0x17c/0x1bf <- scheduler_tick+0x148/0x1bf + 2 run_posix_cpu_timers+0x9e/0x72a <- run_posix_cpu_timers+0x5e/0x72a + 0 scheduler_tick+0x1b6/0x1bf <- scheduler_tick+0x1aa/0x1bf + + +The tracer may be used to dump the trace for the oops'ing cpu on +a kernel oops into the system log. To enable this, +ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one +can either use the sysctl function or set it via the proc system +interface. + + sysctl kernel.ftrace_dump_on_oops=1 + +or + + echo 1 > /proc/sys/kernel/ftrace_dump_on_oops + + +Here's an example of such a dump after a null pointer +dereference in a kernel module: + +[57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 +[57848.106019] IP: [] open+0x6/0x14 [oops] +[57848.106019] PGD 2354e9067 PUD 2375e7067 PMD 0 +[57848.106019] Oops: 0002 [#1] SMP +[57848.106019] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:20:05.0/local_cpus +[57848.106019] Dumping ftrace buffer: +[57848.106019] --------------------------------- +[...] +[57848.106019] 0 chrdev_open+0xe6/0x165 <- cdev_put+0x23/0x24 +[57848.106019] 0 chrdev_open+0x117/0x165 <- chrdev_open+0xfa/0x165 +[57848.106019] 0 chrdev_open+0x120/0x165 <- chrdev_open+0x11c/0x165 +[57848.106019] 0 chrdev_open+0x134/0x165 <- chrdev_open+0x12b/0x165 +[57848.106019] 0 open+0x0/0x14 [oops] <- chrdev_open+0x144/0x165 +[57848.106019] 0 page_fault+0x0/0x30 <- open+0x6/0x14 [oops] +[57848.106019] 0 error_entry+0x0/0x5b <- page_fault+0x4/0x30 +[57848.106019] 0 error_kernelspace+0x0/0x31 <- error_entry+0x59/0x5b +[57848.106019] 0 error_sti+0x0/0x1 <- error_kernelspace+0x2d/0x31 +[57848.106019] 0 page_fault+0x9/0x30 <- error_sti+0x0/0x1 +[57848.106019] 0 do_page_fault+0x0/0x881 <- page_fault+0x1a/0x30 +[...] +[57848.106019] 0 do_page_fault+0x66b/0x881 <- is_prefetch+0x1ee/0x1f2 +[57848.106019] 0 do_page_fault+0x6e0/0x881 <- do_page_fault+0x67a/0x881 +[57848.106019] 0 oops_begin+0x0/0x96 <- do_page_fault+0x6e0/0x881 +[57848.106019] 0 trace_hw_branch_oops+0x0/0x2d <- oops_begin+0x9/0x96 +[...] +[57848.106019] 0 ds_suspend_bts+0x2a/0xe3 <- ds_suspend_bts+0x1a/0xe3 +[57848.106019] --------------------------------- +[57848.106019] CPU 0 +[57848.106019] Modules linked in: oops +[57848.106019] Pid: 5542, comm: cat Tainted: G W 2.6.28 #23 +[57848.106019] RIP: 0010:[] [] open+0x6/0x14 [oops] +[57848.106019] RSP: 0018:ffff880235457d48 EFLAGS: 00010246 +[...] + + +function graph tracer +--------------------------- + +This tracer is similar to the function tracer except that it +probes a function on its entry and its exit. This is done by +using a dynamically allocated stack of return addresses in each +task_struct. On function entry the tracer overwrites the return +address of each function traced to set a custom probe. Thus the +original return address is stored on the stack of return address +in the task_struct. + +Probing on both ends of a function leads to special features +such as: + +- measure of a function's time execution +- having a reliable call stack to draw function calls graph + +This tracer is useful in several situations: + +- you want to find the reason of a strange kernel behavior and + need to see what happens in detail on any areas (or specific + ones). + +- you are experiencing weird latencies but it's difficult to + find its origin. + +- you want to find quickly which path is taken by a specific + function + +- you just want to peek inside a working kernel and want to see + what happens there. + +# tracer: function_graph +# +# CPU DURATION FUNCTION CALLS +# | | | | | | | + + 0) | sys_open() { + 0) | do_sys_open() { + 0) | getname() { + 0) | kmem_cache_alloc() { + 0) 1.382 us | __might_sleep(); + 0) 2.478 us | } + 0) | strncpy_from_user() { + 0) | might_fault() { + 0) 1.389 us | __might_sleep(); + 0) 2.553 us | } + 0) 3.807 us | } + 0) 7.876 us | } + 0) | alloc_fd() { + 0) 0.668 us | _spin_lock(); + 0) 0.570 us | expand_files(); + 0) 0.586 us | _spin_unlock(); + + +There are several columns that can be dynamically +enabled/disabled. You can use every combination of options you +want, depending on your needs. + +- The cpu number on which the function executed is default + enabled. It is sometimes better to only trace one cpu (see + tracing_cpu_mask file) or you might sometimes see unordered + function calls while cpu tracing switch. + + hide: echo nofuncgraph-cpu > /debug/tracing/trace_options + show: echo funcgraph-cpu > /debug/tracing/trace_options + +- The duration (function's time of execution) is displayed on + the closing bracket line of a function or on the same line + than the current function in case of a leaf one. It is default + enabled. + + hide: echo nofuncgraph-duration > /debug/tracing/trace_options + show: echo funcgraph-duration > /debug/tracing/trace_options + +- The overhead field precedes the duration field in case of + reached duration thresholds. + + hide: echo nofuncgraph-overhead > /debug/tracing/trace_options + show: echo funcgraph-overhead > /debug/tracing/trace_options + depends on: funcgraph-duration + + ie: + + 0) | up_write() { + 0) 0.646 us | _spin_lock_irqsave(); + 0) 0.684 us | _spin_unlock_irqrestore(); + 0) 3.123 us | } + 0) 0.548 us | fput(); + 0) + 58.628 us | } + + [...] + + 0) | putname() { + 0) | kmem_cache_free() { + 0) 0.518 us | __phys_addr(); + 0) 1.757 us | } + 0) 2.861 us | } + 0) ! 115.305 us | } + 0) ! 116.402 us | } + + + means that the function exceeded 10 usecs. + ! means that the function exceeded 100 usecs. + + +- The task/pid field displays the thread cmdline and pid which + executed the function. It is default disabled. + + hide: echo nofuncgraph-proc > /debug/tracing/trace_options + show: echo funcgraph-proc > /debug/tracing/trace_options + + ie: + + # tracer: function_graph + # + # CPU TASK/PID DURATION FUNCTION CALLS + # | | | | | | | | | + 0) sh-4802 | | d_free() { + 0) sh-4802 | | call_rcu() { + 0) sh-4802 | | __call_rcu() { + 0) sh-4802 | 0.616 us | rcu_process_gp_end(); + 0) sh-4802 | 0.586 us | check_for_new_grace_period(); + 0) sh-4802 | 2.899 us | } + 0) sh-4802 | 4.040 us | } + 0) sh-4802 | 5.151 us | } + 0) sh-4802 | + 49.370 us | } + + +- The absolute time field is an absolute timestamp given by the + system clock since it started. A snapshot of this time is + given on each entry/exit of functions + + hide: echo nofuncgraph-abstime > /debug/tracing/trace_options + show: echo funcgraph-abstime > /debug/tracing/trace_options + + ie: + + # + # TIME CPU DURATION FUNCTION CALLS + # | | | | | | | | + 360.774522 | 1) 0.541 us | } + 360.774522 | 1) 4.663 us | } + 360.774523 | 1) 0.541 us | __wake_up_bit(); + 360.774524 | 1) 6.796 us | } + 360.774524 | 1) 7.952 us | } + 360.774525 | 1) 9.063 us | } + 360.774525 | 1) 0.615 us | journal_mark_dirty(); + 360.774527 | 1) 0.578 us | __brelse(); + 360.774528 | 1) | reiserfs_prepare_for_journal() { + 360.774528 | 1) | unlock_buffer() { + 360.774529 | 1) | wake_up_bit() { + 360.774529 | 1) | bit_waitqueue() { + 360.774530 | 1) 0.594 us | __phys_addr(); + + +You can put some comments on specific functions by using +trace_printk() For example, if you want to put a comment inside +the __might_sleep() function, you just have to include + and call trace_printk() inside __might_sleep() + +trace_printk("I'm a comment!\n") + +will produce: + + 1) | __might_sleep() { + 1) | /* I'm a comment! */ + 1) 1.449 us | } + + +You might find other useful features for this tracer in the +following "dynamic ftrace" section such as tracing only specific +functions or tasks. + +dynamic ftrace +-------------- + +If CONFIG_DYNAMIC_FTRACE is set, the system will run with +virtually no overhead when function tracing is disabled. The way +this works is the mcount function call (placed at the start of +every kernel function, produced by the -pg switch in gcc), +starts of pointing to a simple return. (Enabling FTRACE will +include the -pg switch in the compiling of the kernel.) + +At compile time every C file object is run through the +recordmcount.pl script (located in the scripts directory). This +script will process the C object using objdump to find all the +locations in the .text section that call mcount. (Note, only the +.text section is processed, since processing other sections like +.init.text may cause races due to those sections being freed). + +A new section called "__mcount_loc" is created that holds +references to all the mcount call sites in the .text section. +This section is compiled back into the original object. The +final linker will add all these references into a single table. + +On boot up, before SMP is initialized, the dynamic ftrace code +scans this table and updates all the locations into nops. It +also records the locations, which are added to the +available_filter_functions list. Modules are processed as they +are loaded and before they are executed. When a module is +unloaded, it also removes its functions from the ftrace function +list. This is automatic in the module unload code, and the +module author does not need to worry about it. + +When tracing is enabled, kstop_machine is called to prevent +races with the CPUS executing code being modified (which can +cause the CPU to do undesireable things), and the nops are +patched back to calls. But this time, they do not call mcount +(which is just a function stub). They now call into the ftrace +infrastructure. + +One special side-effect to the recording of the functions being +traced is that we can now selectively choose which functions we +wish to trace and which ones we want the mcount calls to remain +as nops. + +Two files are used, one for enabling and one for disabling the +tracing of specified functions. They are: + + set_ftrace_filter + +and + + set_ftrace_notrace + +A list of available functions that you can add to these files is +listed in: + + available_filter_functions + + # cat /debug/tracing/available_filter_functions +put_prev_task_idle +kmem_cache_create +pick_next_task_rt +get_online_cpus +pick_next_task_fair +mutex_lock +[...] + +If I am only interested in sys_nanosleep and hrtimer_interrupt: + + # echo sys_nanosleep hrtimer_interrupt \ + > /debug/tracing/set_ftrace_filter + # echo ftrace > /debug/tracing/current_tracer + # echo 1 > /debug/tracing/tracing_enabled + # usleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/trace +# tracer: ftrace +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + usleep-4134 [00] 1317.070017: hrtimer_interrupt <-smp_apic_timer_interrupt + usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call + -0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt + +To see which functions are being traced, you can cat the file: + + # cat /debug/tracing/set_ftrace_filter +hrtimer_interrupt +sys_nanosleep + + +Perhaps this is not enough. The filters also allow simple wild +cards. Only the following are currently available + + * - will match functions that begin with + * - will match functions that end with + ** - will match functions that have in it + +These are the only wild cards which are supported. + + * will not work. + +Note: It is better to use quotes to enclose the wild cards, + otherwise the shell may expand the parameters into names + of files in the local directory. + + # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter + +Produces: + +# tracer: ftrace +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-4003 [00] 1480.611794: hrtimer_init <-copy_process + bash-4003 [00] 1480.611941: hrtimer_start <-hrtick_set + bash-4003 [00] 1480.611956: hrtimer_cancel <-hrtick_clear + bash-4003 [00] 1480.611956: hrtimer_try_to_cancel <-hrtimer_cancel + -0 [00] 1480.612019: hrtimer_get_next_event <-get_next_timer_interrupt + -0 [00] 1480.612025: hrtimer_get_next_event <-get_next_timer_interrupt + -0 [00] 1480.612032: hrtimer_get_next_event <-get_next_timer_interrupt + -0 [00] 1480.612037: hrtimer_get_next_event <-get_next_timer_interrupt + -0 [00] 1480.612382: hrtimer_get_next_event <-get_next_timer_interrupt + + +Notice that we lost the sys_nanosleep. + + # cat /debug/tracing/set_ftrace_filter +hrtimer_run_queues +hrtimer_run_pending +hrtimer_init +hrtimer_cancel +hrtimer_try_to_cancel +hrtimer_forward +hrtimer_start +hrtimer_reprogram +hrtimer_force_reprogram +hrtimer_get_next_event +hrtimer_interrupt +hrtimer_nanosleep +hrtimer_wakeup +hrtimer_get_remaining +hrtimer_get_res +hrtimer_init_sleeper + + +This is because the '>' and '>>' act just like they do in bash. +To rewrite the filters, use '>' +To append to the filters, use '>>' + +To clear out a filter so that all functions will be recorded +again: + + # echo > /debug/tracing/set_ftrace_filter + # cat /debug/tracing/set_ftrace_filter + # + +Again, now we want to append. + + # echo sys_nanosleep > /debug/tracing/set_ftrace_filter + # cat /debug/tracing/set_ftrace_filter +sys_nanosleep + # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter + # cat /debug/tracing/set_ftrace_filter +hrtimer_run_queues +hrtimer_run_pending +hrtimer_init +hrtimer_cancel +hrtimer_try_to_cancel +hrtimer_forward +hrtimer_start +hrtimer_reprogram +hrtimer_force_reprogram +hrtimer_get_next_event +hrtimer_interrupt +sys_nanosleep +hrtimer_nanosleep +hrtimer_wakeup +hrtimer_get_remaining +hrtimer_get_res +hrtimer_init_sleeper + + +The set_ftrace_notrace prevents those functions from being +traced. + + # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace + +Produces: + +# tracer: ftrace +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-4043 [01] 115.281644: finish_task_switch <-schedule + bash-4043 [01] 115.281645: hrtick_set <-schedule + bash-4043 [01] 115.281645: hrtick_clear <-hrtick_set + bash-4043 [01] 115.281646: wait_for_completion <-__stop_machine_run + bash-4043 [01] 115.281647: wait_for_common <-wait_for_completion + bash-4043 [01] 115.281647: kthread_stop <-stop_machine_run + bash-4043 [01] 115.281648: init_waitqueue_head <-kthread_stop + bash-4043 [01] 115.281648: wake_up_process <-kthread_stop + bash-4043 [01] 115.281649: try_to_wake_up <-wake_up_process + +We can see that there's no more lock or preempt tracing. + + +Dynamic ftrace with the function graph tracer +--------------------------------------------- + +Although what has been explained above concerns both the +function tracer and the function-graph-tracer, there are some +special features only available in the function-graph tracer. + +If you want to trace only one function and all of its children, +you just have to echo its name into set_graph_function: + + echo __do_fault > set_graph_function + +will produce the following "expanded" trace of the __do_fault() +function: + + 0) | __do_fault() { + 0) | filemap_fault() { + 0) | find_lock_page() { + 0) 0.804 us | find_get_page(); + 0) | __might_sleep() { + 0) 1.329 us | } + 0) 3.904 us | } + 0) 4.979 us | } + 0) 0.653 us | _spin_lock(); + 0) 0.578 us | page_add_file_rmap(); + 0) 0.525 us | native_set_pte_at(); + 0) 0.585 us | _spin_unlock(); + 0) | unlock_page() { + 0) 0.541 us | page_waitqueue(); + 0) 0.639 us | __wake_up_bit(); + 0) 2.786 us | } + 0) + 14.237 us | } + 0) | __do_fault() { + 0) | filemap_fault() { + 0) | find_lock_page() { + 0) 0.698 us | find_get_page(); + 0) | __might_sleep() { + 0) 1.412 us | } + 0) 3.950 us | } + 0) 5.098 us | } + 0) 0.631 us | _spin_lock(); + 0) 0.571 us | page_add_file_rmap(); + 0) 0.526 us | native_set_pte_at(); + 0) 0.586 us | _spin_unlock(); + 0) | unlock_page() { + 0) 0.533 us | page_waitqueue(); + 0) 0.638 us | __wake_up_bit(); + 0) 2.793 us | } + 0) + 14.012 us | } + +You can also expand several functions at once: + + echo sys_open > set_graph_function + echo sys_close >> set_graph_function + +Now if you want to go back to trace all functions you can clear +this special filter via: + + echo > set_graph_function + + +trace_pipe +---------- + +The trace_pipe outputs the same content as the trace file, but +the effect on the tracing is different. Every read from +trace_pipe is consumed. This means that subsequent reads will be +different. The trace is live. + + # echo function > /debug/tracing/current_tracer + # cat /debug/tracing/trace_pipe > /tmp/trace.out & +[1] 4153 + # echo 1 > /debug/tracing/tracing_enabled + # usleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/trace +# tracer: function +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + + # + # cat /tmp/trace.out + bash-4043 [00] 41.267106: finish_task_switch <-schedule + bash-4043 [00] 41.267106: hrtick_set <-schedule + bash-4043 [00] 41.267107: hrtick_clear <-hrtick_set + bash-4043 [00] 41.267108: wait_for_completion <-__stop_machine_run + bash-4043 [00] 41.267108: wait_for_common <-wait_for_completion + bash-4043 [00] 41.267109: kthread_stop <-stop_machine_run + bash-4043 [00] 41.267109: init_waitqueue_head <-kthread_stop + bash-4043 [00] 41.267110: wake_up_process <-kthread_stop + bash-4043 [00] 41.267110: try_to_wake_up <-wake_up_process + bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up + + +Note, reading the trace_pipe file will block until more input is +added. By changing the tracer, trace_pipe will issue an EOF. We +needed to set the function tracer _before_ we "cat" the +trace_pipe file. + + +trace entries +------------- + +Having too much or not enough data can be troublesome in +diagnosing an issue in the kernel. The file buffer_size_kb is +used to modify the size of the internal trace buffers. The +number listed is the number of entries that can be recorded per +CPU. To know the full size, multiply the number of possible CPUS +with the number of entries. + + # cat /debug/tracing/buffer_size_kb +1408 (units kilobytes) + +Note, to modify this, you must have tracing completely disabled. +To do that, echo "nop" into the current_tracer. If the +current_tracer is not set to "nop", an EINVAL error will be +returned. + + # echo nop > /debug/tracing/current_tracer + # echo 10000 > /debug/tracing/buffer_size_kb + # cat /debug/tracing/buffer_size_kb +10000 (units kilobytes) + +The number of pages which will be allocated is limited to a +percentage of available memory. Allocating too much will produce +an error. + + # echo 1000000000000 > /debug/tracing/buffer_size_kb +-bash: echo: write error: Cannot allocate memory + # cat /debug/tracing/buffer_size_kb +85 + +----------- + +More details can be found in the source code, in the +kernel/tracing/*.c files. diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt new file mode 100644 index 0000000..a956d9b --- /dev/null +++ b/Documentation/trace/kmemtrace.txt @@ -0,0 +1,126 @@ + kmemtrace - Kernel Memory Tracer + + by Eduard - Gabriel Munteanu + + +I. Introduction +=============== + +kmemtrace helps kernel developers figure out two things: +1) how different allocators (SLAB, SLUB etc.) perform +2) how kernel code allocates memory and how much + +To do this, we trace every allocation and export information to the userspace +through the relay interface. We export things such as the number of requested +bytes, the number of bytes actually allocated (i.e. including internal +fragmentation), whether this is a slab allocation or a plain kmalloc() and so +on. + +The actual analysis is performed by a userspace tool (see section III for +details on where to get it from). It logs the data exported by the kernel, +processes it and (as of writing this) can provide the following information: +- the total amount of memory allocated and fragmentation per call-site +- the amount of memory allocated and fragmentation per allocation +- total memory allocated and fragmentation in the collected dataset +- number of cross-CPU allocation and frees (makes sense in NUMA environments) + +Moreover, it can potentially find inconsistent and erroneous behavior in +kernel code, such as using slab free functions on kmalloc'ed memory or +allocating less memory than requested (but not truly failed allocations). + +kmemtrace also makes provisions for tracing on some arch and analysing the +data on another. + +II. Design and goals +==================== + +kmemtrace was designed to handle rather large amounts of data. Thus, it uses +the relay interface to export whatever is logged to userspace, which then +stores it. Analysis and reporting is done asynchronously, that is, after the +data is collected and stored. By design, it allows one to log and analyse +on different machines and different arches. + +As of writing this, the ABI is not considered stable, though it might not +change much. However, no guarantees are made about compatibility yet. When +deemed stable, the ABI should still allow easy extension while maintaining +backward compatibility. This is described further in Documentation/ABI. + +Summary of design goals: + - allow logging and analysis to be done across different machines + - be fast and anticipate usage in high-load environments (*) + - be reasonably extensible + - make it possible for GNU/Linux distributions to have kmemtrace + included in their repositories + +(*) - one of the reasons Pekka Enberg's original userspace data analysis + tool's code was rewritten from Perl to C (although this is more than a + simple conversion) + + +III. Quick usage guide +====================== + +1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable +CONFIG_KMEMTRACE). + +2) Get the userspace tool and build it: +$ git-clone git://repo.or.cz/kmemtrace-user.git # current repository +$ cd kmemtrace-user/ +$ ./autogen.sh +$ ./configure +$ make + +3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the +'single' runlevel (so that relay buffers don't fill up easily), and run +kmemtrace: +# '$' does not mean user, but root here. +$ mount -t debugfs none /sys/kernel/debug +$ mount -t proc none /proc +$ cd path/to/kmemtrace-user/ +$ ./kmemtraced +Wait a bit, then stop it with CTRL+C. +$ cat /sys/kernel/debug/kmemtrace/total_overruns # Check if we didn't + # overrun, should + # be zero. +$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to + check its correctness] +$ ./kmemtrace-report + +Now you should have a nice and short summary of how the allocator performs. + +IV. FAQ and known issues +======================== + +Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix +this? Should I worry? +A: If it's non-zero, this affects kmemtrace's accuracy, depending on how +large the number is. You can fix it by supplying a higher +'kmemtrace.subbufs=N' kernel parameter. +--- + +Q: kmemtrace_check reports errors, how do I fix this? Should I worry? +A: This is a bug and should be reported. It can occur for a variety of +reasons: + - possible bugs in relay code + - possible misuse of relay by kmemtrace + - timestamps being collected unorderly +Or you may fix it yourself and send us a patch. +--- + +Q: kmemtrace_report shows many errors, how do I fix this? Should I worry? +A: This is a known issue and I'm working on it. These might be true errors +in kernel code, which may have inconsistent behavior (e.g. allocating memory +with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed +out this behavior may work with SLAB, but may fail with other allocators. + +It may also be due to lack of tracing in some unusual allocator functions. + +We don't want bug reports regarding this issue yet. +--- + +V. See also +=========== + +Documentation/kernel-parameters.txt +Documentation/ABI/testing/debugfs-kmemtrace + diff --git a/Documentation/trace/mmiotrace.txt b/Documentation/trace/mmiotrace.txt new file mode 100644 index 0000000..5731c67 --- /dev/null +++ b/Documentation/trace/mmiotrace.txt @@ -0,0 +1,163 @@ + In-kernel memory-mapped I/O tracing + + +Home page and links to optional user space tools: + + http://nouveau.freedesktop.org/wiki/MmioTrace + +MMIO tracing was originally developed by Intel around 2003 for their Fault +Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel, +Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau +project in mind. Since then many people have contributed. + +Mmiotrace was built for reverse engineering any memory-mapped IO device with +the Nouveau project as the first real user. Only x86 and x86_64 architectures +are supported. + +Out-of-tree mmiotrace was originally modified for mainline inclusion and +ftrace framework by Pekka Paalanen . + + +Preparation +----------- + +Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is +disabled by default, so it is safe to have this set to yes. SMP systems are +supported, but tracing is unreliable and may miss events if more than one CPU +is on-line, therefore mmiotrace takes all but one CPU off-line during run-time +activation. You can re-enable CPUs by hand, but you have been warned, there +is no way to automatically detect if you are losing events due to CPUs racing. + + +Usage Quick Reference +--------------------- + +$ mount -t debugfs debugfs /debug +$ echo mmiotrace > /debug/tracing/current_tracer +$ cat /debug/tracing/trace_pipe > mydump.txt & +Start X or whatever. +$ echo "X is up" > /debug/tracing/trace_marker +$ echo nop > /debug/tracing/current_tracer +Check for lost events. + + +Usage +----- + +Make sure debugfs is mounted to /debug. If not, (requires root privileges) +$ mount -t debugfs debugfs /debug + +Check that the driver you are about to trace is not loaded. + +Activate mmiotrace (requires root privileges): +$ echo mmiotrace > /debug/tracing/current_tracer + +Start storing the trace: +$ cat /debug/tracing/trace_pipe > mydump.txt & +The 'cat' process should stay running (sleeping) in the background. + +Load the driver you want to trace and use it. Mmiotrace will only catch MMIO +accesses to areas that are ioremapped while mmiotrace is active. + +During tracing you can place comments (markers) into the trace by +$ echo "X is up" > /debug/tracing/trace_marker +This makes it easier to see which part of the (huge) trace corresponds to +which action. It is recommended to place descriptive markers about what you +do. + +Shut down mmiotrace (requires root privileges): +$ echo nop > /debug/tracing/current_tracer +The 'cat' process exits. If it does not, kill it by issuing 'fg' command and +pressing ctrl+c. + +Check that mmiotrace did not lose events due to a buffer filling up. Either +$ grep -i lost mydump.txt +which tells you exactly how many events were lost, or use +$ dmesg +to view your kernel log and look for "mmiotrace has lost events" warning. If +events were lost, the trace is incomplete. You should enlarge the buffers and +try again. Buffers are enlarged by first seeing how large the current buffers +are: +$ cat /debug/tracing/buffer_size_kb +gives you a number. Approximately double this number and write it back, for +instance: +$ echo 128000 > /debug/tracing/buffer_size_kb +Then start again from the top. + +If you are doing a trace for a driver project, e.g. Nouveau, you should also +do the following before sending your results: +$ lspci -vvv > lspci.txt +$ dmesg > dmesg.txt +$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt +and then send the .tar.gz file. The trace compresses considerably. Replace +"pciid" and "nick" with the PCI ID or model name of your piece of hardware +under investigation and your nick name. + + +How Mmiotrace Works +------------------- + +Access to hardware IO-memory is gained by mapping addresses from PCI bus by +calling one of the ioremap_*() functions. Mmiotrace is hooked into the +__ioremap() function and gets called whenever a mapping is created. Mapping is +an event that is recorded into the trace log. Note, that ISA range mappings +are not caught, since the mapping always exists and is returned directly. + +MMIO accesses are recorded via page faults. Just before __ioremap() returns, +the mapped pages are marked as not present. Any access to the pages causes a +fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace +marks the page present, sets TF flag to achieve single stepping and exits the +fault handler. The instruction that faulted is executed and debug trap is +entered. Here mmiotrace again marks the page as not present. The instruction +is decoded to get the type of operation (read/write), data width and the value +read or written. These are stored to the trace log. + +Setting the page present in the page fault handler has a race condition on SMP +machines. During the single stepping other CPUs may run freely on that page +and events can be missed without a notice. Re-enabling other CPUs during +tracing is discouraged. + + +Trace Log Format +---------------- + +The raw log is text and easily filtered with e.g. grep and awk. One record is +one line in the log. A record starts with a keyword, followed by keyword +dependant arguments. Arguments are separated by a space, or continue until the +end of line. The format for version 20070824 is as follows: + +Explanation Keyword Space separated arguments +--------------------------------------------------------------------------- + +read event R width, timestamp, map id, physical, value, PC, PID +write event W width, timestamp, map id, physical, value, PC, PID +ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID +iounmap event UNMAP timestamp, map id, PC, PID +marker MARK timestamp, text +version VERSION the string "20070824" +info for reader LSPCI one line from lspci -v +PCI address map PCIDEV space separated /proc/bus/pci/devices data +unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID + +Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual +is a kernel virtual address. Width is the data width in bytes and value is the +data value. Map id is an arbitrary id number identifying the mapping that was +used in an operation. PC is the program counter and PID is process id. PC is +zero if it is not recorded. PID is always zero as tracing MMIO accesses +originating in user space memory is not yet supported. + +For instance, the following awk filter will pass all 32-bit writes that target +physical addresses in the range [0xfb73ce40, 0xfb800000[ + +$ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 && +adr < 0xfb800000) print; }' + + +Tools for Developers +-------------------- + +The user space tools include utilities for: +- replacing numeric addresses and values with hardware register names +- replaying MMIO logs, i.e., re-executing the recorded writes + + diff --git a/Documentation/trace/tracepoints.txt b/Documentation/trace/tracepoints.txt new file mode 100644 index 0000000..c0e1cee --- /dev/null +++ b/Documentation/trace/tracepoints.txt @@ -0,0 +1,116 @@ + Using the Linux Kernel Tracepoints + + Mathieu Desnoyers + + +This document introduces Linux Kernel Tracepoints and their use. It +provides examples of how to insert tracepoints in the kernel and +connect probe functions to them and provides some examples of probe +functions. + + +* Purpose of tracepoints + +A tracepoint placed in code provides a hook to call a function (probe) +that you can provide at runtime. A tracepoint can be "on" (a probe is +connected to it) or "off" (no probe is attached). When a tracepoint is +"off" it has no effect, except for adding a tiny time penalty +(checking a condition for a branch) and space penalty (adding a few +bytes for the function call at the end of the instrumented function +and adds a data structure in a separate section). When a tracepoint +is "on", the function you provide is called each time the tracepoint +is executed, in the execution context of the caller. When the function +provided ends its execution, it returns to the caller (continuing from +the tracepoint site). + +You can put tracepoints at important locations in the code. They are +lightweight hooks that can pass an arbitrary number of parameters, +which prototypes are described in a tracepoint declaration placed in a +header file. + +They can be used for tracing and performance accounting. + + +* Usage + +Two elements are required for tracepoints : + +- A tracepoint definition, placed in a header file. +- The tracepoint statement, in C code. + +In order to use tracepoints, you should include linux/tracepoint.h. + +In include/trace/subsys.h : + +#include + +DECLARE_TRACE(subsys_eventname, + TP_PROTO(int firstarg, struct task_struct *p), + TP_ARGS(firstarg, p)); + +In subsys/file.c (where the tracing statement must be added) : + +#include + +DEFINE_TRACE(subsys_eventname); + +void somefct(void) +{ + ... + trace_subsys_eventname(arg, task); + ... +} + +Where : +- subsys_eventname is an identifier unique to your event + - subsys is the name of your subsystem. + - eventname is the name of the event to trace. + +- TP_PROTO(int firstarg, struct task_struct *p) is the prototype of the + function called by this tracepoint. + +- TP_ARGS(firstarg, p) are the parameters names, same as found in the + prototype. + +Connecting a function (probe) to a tracepoint is done by providing a +probe (function to call) for the specific tracepoint through +register_trace_subsys_eventname(). Removing a probe is done through +unregister_trace_subsys_eventname(); it will remove the probe. + +tracepoint_synchronize_unregister() must be called before the end of +the module exit function to make sure there is no caller left using +the probe. This, and the fact that preemption is disabled around the +probe call, make sure that probe removal and module unload are safe. +See the "Probe example" section below for a sample probe module. + +The tracepoint mechanism supports inserting multiple instances of the +same tracepoint, but a single definition must be made of a given +tracepoint name over all the kernel to make sure no type conflict will +occur. Name mangling of the tracepoints is done using the prototypes +to make sure typing is correct. Verification of probe type correctness +is done at the registration site by the compiler. Tracepoints can be +put in inline functions, inlined static functions, and unrolled loops +as well as regular functions. + +The naming scheme "subsys_event" is suggested here as a convention +intended to limit collisions. Tracepoint names are global to the +kernel: they are considered as being the same whether they are in the +core kernel image or in modules. + +If the tracepoint has to be used in kernel modules, an +EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be +used to export the defined tracepoints. + +* Probe / tracepoint example + +See the example provided in samples/tracepoints + +Compile them with your kernel. They are built during 'make' (not +'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m. + +Run, as root : +modprobe tracepoint-sample (insmod order is not important) +modprobe tracepoint-probe-sample +cat /proc/tracepoint-sample (returns an expected error) +rmmod tracepoint-sample tracepoint-probe-sample +dmesg diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt deleted file mode 100644 index c0e1cee..0000000 --- a/Documentation/tracepoints.txt +++ /dev/null @@ -1,116 +0,0 @@ - Using the Linux Kernel Tracepoints - - Mathieu Desnoyers - - -This document introduces Linux Kernel Tracepoints and their use. It -provides examples of how to insert tracepoints in the kernel and -connect probe functions to them and provides some examples of probe -functions. - - -* Purpose of tracepoints - -A tracepoint placed in code provides a hook to call a function (probe) -that you can provide at runtime. A tracepoint can be "on" (a probe is -connected to it) or "off" (no probe is attached). When a tracepoint is -"off" it has no effect, except for adding a tiny time penalty -(checking a condition for a branch) and space penalty (adding a few -bytes for the function call at the end of the instrumented function -and adds a data structure in a separate section). When a tracepoint -is "on", the function you provide is called each time the tracepoint -is executed, in the execution context of the caller. When the function -provided ends its execution, it returns to the caller (continuing from -the tracepoint site). - -You can put tracepoints at important locations in the code. They are -lightweight hooks that can pass an arbitrary number of parameters, -which prototypes are described in a tracepoint declaration placed in a -header file. - -They can be used for tracing and performance accounting. - - -* Usage - -Two elements are required for tracepoints : - -- A tracepoint definition, placed in a header file. -- The tracepoint statement, in C code. - -In order to use tracepoints, you should include linux/tracepoint.h. - -In include/trace/subsys.h : - -#include - -DECLARE_TRACE(subsys_eventname, - TP_PROTO(int firstarg, struct task_struct *p), - TP_ARGS(firstarg, p)); - -In subsys/file.c (where the tracing statement must be added) : - -#include - -DEFINE_TRACE(subsys_eventname); - -void somefct(void) -{ - ... - trace_subsys_eventname(arg, task); - ... -} - -Where : -- subsys_eventname is an identifier unique to your event - - subsys is the name of your subsystem. - - eventname is the name of the event to trace. - -- TP_PROTO(int firstarg, struct task_struct *p) is the prototype of the - function called by this tracepoint. - -- TP_ARGS(firstarg, p) are the parameters names, same as found in the - prototype. - -Connecting a function (probe) to a tracepoint is done by providing a -probe (function to call) for the specific tracepoint through -register_trace_subsys_eventname(). Removing a probe is done through -unregister_trace_subsys_eventname(); it will remove the probe. - -tracepoint_synchronize_unregister() must be called before the end of -the module exit function to make sure there is no caller left using -the probe. This, and the fact that preemption is disabled around the -probe call, make sure that probe removal and module unload are safe. -See the "Probe example" section below for a sample probe module. - -The tracepoint mechanism supports inserting multiple instances of the -same tracepoint, but a single definition must be made of a given -tracepoint name over all the kernel to make sure no type conflict will -occur. Name mangling of the tracepoints is done using the prototypes -to make sure typing is correct. Verification of probe type correctness -is done at the registration site by the compiler. Tracepoints can be -put in inline functions, inlined static functions, and unrolled loops -as well as regular functions. - -The naming scheme "subsys_event" is suggested here as a convention -intended to limit collisions. Tracepoint names are global to the -kernel: they are considered as being the same whether they are in the -core kernel image or in modules. - -If the tracepoint has to be used in kernel modules, an -EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be -used to export the defined tracepoints. - -* Probe / tracepoint example - -See the example provided in samples/tracepoints - -Compile them with your kernel. They are built during 'make' (not -'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m. - -Run, as root : -modprobe tracepoint-sample (insmod order is not important) -modprobe tracepoint-probe-sample -cat /proc/tracepoint-sample (returns an expected error) -rmmod tracepoint-sample tracepoint-probe-sample -dmesg diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt deleted file mode 100644 index 5731c67..0000000 --- a/Documentation/tracers/mmiotrace.txt +++ /dev/null @@ -1,163 +0,0 @@ - In-kernel memory-mapped I/O tracing - - -Home page and links to optional user space tools: - - http://nouveau.freedesktop.org/wiki/MmioTrace - -MMIO tracing was originally developed by Intel around 2003 for their Fault -Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel, -Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau -project in mind. Since then many people have contributed. - -Mmiotrace was built for reverse engineering any memory-mapped IO device with -the Nouveau project as the first real user. Only x86 and x86_64 architectures -are supported. - -Out-of-tree mmiotrace was originally modified for mainline inclusion and -ftrace framework by Pekka Paalanen . - - -Preparation ------------ - -Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is -disabled by default, so it is safe to have this set to yes. SMP systems are -supported, but tracing is unreliable and may miss events if more than one CPU -is on-line, therefore mmiotrace takes all but one CPU off-line during run-time -activation. You can re-enable CPUs by hand, but you have been warned, there -is no way to automatically detect if you are losing events due to CPUs racing. - - -Usage Quick Reference ---------------------- - -$ mount -t debugfs debugfs /debug -$ echo mmiotrace > /debug/tracing/current_tracer -$ cat /debug/tracing/trace_pipe > mydump.txt & -Start X or whatever. -$ echo "X is up" > /debug/tracing/trace_marker -$ echo nop > /debug/tracing/current_tracer -Check for lost events. - - -Usage ------ - -Make sure debugfs is mounted to /debug. If not, (requires root privileges) -$ mount -t debugfs debugfs /debug - -Check that the driver you are about to trace is not loaded. - -Activate mmiotrace (requires root privileges): -$ echo mmiotrace > /debug/tracing/current_tracer - -Start storing the trace: -$ cat /debug/tracing/trace_pipe > mydump.txt & -The 'cat' process should stay running (sleeping) in the background. - -Load the driver you want to trace and use it. Mmiotrace will only catch MMIO -accesses to areas that are ioremapped while mmiotrace is active. - -During tracing you can place comments (markers) into the trace by -$ echo "X is up" > /debug/tracing/trace_marker -This makes it easier to see which part of the (huge) trace corresponds to -which action. It is recommended to place descriptive markers about what you -do. - -Shut down mmiotrace (requires root privileges): -$ echo nop > /debug/tracing/current_tracer -The 'cat' process exits. If it does not, kill it by issuing 'fg' command and -pressing ctrl+c. - -Check that mmiotrace did not lose events due to a buffer filling up. Either -$ grep -i lost mydump.txt -which tells you exactly how many events were lost, or use -$ dmesg -to view your kernel log and look for "mmiotrace has lost events" warning. If -events were lost, the trace is incomplete. You should enlarge the buffers and -try again. Buffers are enlarged by first seeing how large the current buffers -are: -$ cat /debug/tracing/buffer_size_kb -gives you a number. Approximately double this number and write it back, for -instance: -$ echo 128000 > /debug/tracing/buffer_size_kb -Then start again from the top. - -If you are doing a trace for a driver project, e.g. Nouveau, you should also -do the following before sending your results: -$ lspci -vvv > lspci.txt -$ dmesg > dmesg.txt -$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt -and then send the .tar.gz file. The trace compresses considerably. Replace -"pciid" and "nick" with the PCI ID or model name of your piece of hardware -under investigation and your nick name. - - -How Mmiotrace Works -------------------- - -Access to hardware IO-memory is gained by mapping addresses from PCI bus by -calling one of the ioremap_*() functions. Mmiotrace is hooked into the -__ioremap() function and gets called whenever a mapping is created. Mapping is -an event that is recorded into the trace log. Note, that ISA range mappings -are not caught, since the mapping always exists and is returned directly. - -MMIO accesses are recorded via page faults. Just before __ioremap() returns, -the mapped pages are marked as not present. Any access to the pages causes a -fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace -marks the page present, sets TF flag to achieve single stepping and exits the -fault handler. The instruction that faulted is executed and debug trap is -entered. Here mmiotrace again marks the page as not present. The instruction -is decoded to get the type of operation (read/write), data width and the value -read or written. These are stored to the trace log. - -Setting the page present in the page fault handler has a race condition on SMP -machines. During the single stepping other CPUs may run freely on that page -and events can be missed without a notice. Re-enabling other CPUs during -tracing is discouraged. - - -Trace Log Format ----------------- - -The raw log is text and easily filtered with e.g. grep and awk. One record is -one line in the log. A record starts with a keyword, followed by keyword -dependant arguments. Arguments are separated by a space, or continue until the -end of line. The format for version 20070824 is as follows: - -Explanation Keyword Space separated arguments ---------------------------------------------------------------------------- - -read event R width, timestamp, map id, physical, value, PC, PID -write event W width, timestamp, map id, physical, value, PC, PID -ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID -iounmap event UNMAP timestamp, map id, PC, PID -marker MARK timestamp, text -version VERSION the string "20070824" -info for reader LSPCI one line from lspci -v -PCI address map PCIDEV space separated /proc/bus/pci/devices data -unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID - -Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual -is a kernel virtual address. Width is the data width in bytes and value is the -data value. Map id is an arbitrary id number identifying the mapping that was -used in an operation. PC is the program counter and PID is process id. PC is -zero if it is not recorded. PID is always zero as tracing MMIO accesses -originating in user space memory is not yet supported. - -For instance, the following awk filter will pass all 32-bit writes that target -physical addresses in the range [0xfb73ce40, 0xfb800000[ - -$ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 && -adr < 0xfb800000) print; }' - - -Tools for Developers --------------------- - -The user space tools include utilities for: -- replacing numeric addresses and values with hardware register names -- replaying MMIO logs, i.e., re-executing the recorded writes - - diff --git a/Documentation/vm/kmemtrace.txt b/Documentation/vm/kmemtrace.txt deleted file mode 100644 index a956d9b..0000000 --- a/Documentation/vm/kmemtrace.txt +++ /dev/null @@ -1,126 +0,0 @@ - kmemtrace - Kernel Memory Tracer - - by Eduard - Gabriel Munteanu - - -I. Introduction -=============== - -kmemtrace helps kernel developers figure out two things: -1) how different allocators (SLAB, SLUB etc.) perform -2) how kernel code allocates memory and how much - -To do this, we trace every allocation and export information to the userspace -through the relay interface. We export things such as the number of requested -bytes, the number of bytes actually allocated (i.e. including internal -fragmentation), whether this is a slab allocation or a plain kmalloc() and so -on. - -The actual analysis is performed by a userspace tool (see section III for -details on where to get it from). It logs the data exported by the kernel, -processes it and (as of writing this) can provide the following information: -- the total amount of memory allocated and fragmentation per call-site -- the amount of memory allocated and fragmentation per allocation -- total memory allocated and fragmentation in the collected dataset -- number of cross-CPU allocation and frees (makes sense in NUMA environments) - -Moreover, it can potentially find inconsistent and erroneous behavior in -kernel code, such as using slab free functions on kmalloc'ed memory or -allocating less memory than requested (but not truly failed allocations). - -kmemtrace also makes provisions for tracing on some arch and analysing the -data on another. - -II. Design and goals -==================== - -kmemtrace was designed to handle rather large amounts of data. Thus, it uses -the relay interface to export whatever is logged to userspace, which then -stores it. Analysis and reporting is done asynchronously, that is, after the -data is collected and stored. By design, it allows one to log and analyse -on different machines and different arches. - -As of writing this, the ABI is not considered stable, though it might not -change much. However, no guarantees are made about compatibility yet. When -deemed stable, the ABI should still allow easy extension while maintaining -backward compatibility. This is described further in Documentation/ABI. - -Summary of design goals: - - allow logging and analysis to be done across different machines - - be fast and anticipate usage in high-load environments (*) - - be reasonably extensible - - make it possible for GNU/Linux distributions to have kmemtrace - included in their repositories - -(*) - one of the reasons Pekka Enberg's original userspace data analysis - tool's code was rewritten from Perl to C (although this is more than a - simple conversion) - - -III. Quick usage guide -====================== - -1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable -CONFIG_KMEMTRACE). - -2) Get the userspace tool and build it: -$ git-clone git://repo.or.cz/kmemtrace-user.git # current repository -$ cd kmemtrace-user/ -$ ./autogen.sh -$ ./configure -$ make - -3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the -'single' runlevel (so that relay buffers don't fill up easily), and run -kmemtrace: -# '$' does not mean user, but root here. -$ mount -t debugfs none /sys/kernel/debug -$ mount -t proc none /proc -$ cd path/to/kmemtrace-user/ -$ ./kmemtraced -Wait a bit, then stop it with CTRL+C. -$ cat /sys/kernel/debug/kmemtrace/total_overruns # Check if we didn't - # overrun, should - # be zero. -$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to - check its correctness] -$ ./kmemtrace-report - -Now you should have a nice and short summary of how the allocator performs. - -IV. FAQ and known issues -======================== - -Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix -this? Should I worry? -A: If it's non-zero, this affects kmemtrace's accuracy, depending on how -large the number is. You can fix it by supplying a higher -'kmemtrace.subbufs=N' kernel parameter. ---- - -Q: kmemtrace_check reports errors, how do I fix this? Should I worry? -A: This is a bug and should be reported. It can occur for a variety of -reasons: - - possible bugs in relay code - - possible misuse of relay by kmemtrace - - timestamps being collected unorderly -Or you may fix it yourself and send us a patch. ---- - -Q: kmemtrace_report shows many errors, how do I fix this? Should I worry? -A: This is a known issue and I'm working on it. These might be true errors -in kernel code, which may have inconsistent behavior (e.g. allocating memory -with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed -out this behavior may work with SLAB, but may fail with other allocators. - -It may also be due to lack of tracing in some unusual allocator functions. - -We don't want bug reports regarding this issue yet. ---- - -V. See also -=========== - -Documentation/kernel-parameters.txt -Documentation/ABI/testing/debugfs-kmemtrace - -- cgit v0.10.2 From e3c8ca8336707062f3f7cb1cd7e6b3c753baccdd Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 8 Apr 2009 19:45:12 -0500 Subject: sched: do not count frozen tasks toward load Freezing tasks via the cgroup freezer causes the load average to climb because the freezer's current implementation puts frozen tasks in uninterruptible sleep (D state). Some applications which perform job-scheduling functions consult the load average when making decisions. If a cgroup is frozen, the load average does not provide a useful measure of the system's utilization to such applications. This is especially inconvenient if the job scheduler employs the cgroup freezer as a mechanism for preempting low priority jobs. Contrast this with using SIGSTOP for the same purpose: the stopped tasks do not count toward system load. Change task_contributes_to_load() to return false if the task is frozen. This results in /proc/loadavg behavior that better meets users' expectations. Signed-off-by: Nathan Lynch Acked-by: Andrew Morton Acked-by: Nigel Cunningham Tested-by: Nigel Cunningham Cc: Cc: containers@lists.linux-foundation.org Cc: linux-pm@lists.linux-foundation.org Cc: Matt Helsley LKML-Reference: <20090408194512.47a99b95@manatee.lan> Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index 98e1fe5..b4c38bc 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -205,7 +205,8 @@ extern unsigned long long time_sync_thresh; #define task_is_stopped_or_traced(task) \ ((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0) #define task_contributes_to_load(task) \ - ((task->state & TASK_UNINTERRUPTIBLE) != 0) + ((task->state & TASK_UNINTERRUPTIBLE) != 0 && \ + (task->flags & PF_FROZEN) == 0) #define __set_task_state(tsk, state_value) \ do { (tsk)->state = (state_value); } while (0) -- cgit v0.10.2 From 0e983d3c38f87d405beb1ebbe2fea11eb01cc4c6 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Thu, 9 Apr 2009 14:05:02 +0800 Subject: [ARM] pxa/colibri: fix missing variable name in inline functions Even they are empty inline functions, the compiler still complains about the missing variable names. Signed-off-by: Eric Miao Cc: Daniel Mack diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 90230c6..a88d7ca 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -10,13 +10,13 @@ #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin); #else -static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {} +static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {} #endif #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) extern void colibri_pxa3xx_init_lcd(int bl_pin); #else -static inline void colibri_pxa3xx_init_lcd(int) {} +static inline void colibri_pxa3xx_init_lcd(int bl_pin) {} #endif #if defined(CONFIG_AX88796) -- cgit v0.10.2 From 6c2da9c2182fe64b1443a75efc09e493923e86b0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Apr 2009 01:09:33 -0700 Subject: forcedeth: Use napi_complete() not __napi_complete(). It's not enough that forcedeth's interrupts are disabled, local cpu interrupts have to unconditionally be off when we remove the device from the poll list. Based upon a crash report from Alexander Beregalov : WARNING: at lib/list_debug.c:30 __list_add+0x89/0x90() Hardware name: list_add corruption. prev->next should be next (c06ea834), but was f70244c8. (prev=c06ea834). Modules linked in: w83627hf hwmon_vid i2c_nforce2 Pid: 1436, comm: portageq Not tainted 2.6.30-rc1 #1 Call Trace: [] warn_slowpath+0x73/0xd0 [] ? __kfree_skb+0x38/0x90 [] ? tcp_data_snd_check+0x26/0xe0 [] ? tcp_rcv_established+0x2bf/0x5e0 [] ? tcp_v4_rcv+0x47a/0x610 [] ? print_lock_contention_bug+0x1d/0x110 [] ? _spin_unlock+0x27/0x50 [] ? tcp_v4_rcv+0x54b/0x610 [] __list_add+0x89/0x90 [] __napi_schedule+0x29/0x60 [] e1000_intr+0xbd/0x1a0 [] handle_IRQ_event+0x3e/0x120 [] handle_fasteoi_irq+0x60/0xd0 [] handle_irq+0x34/0x60 [] ? rcu_irq_enter+0x8/0x40 [] do_IRQ+0x39/0xa0 [] ? skb_release_head_state+0x2c/0x60 [] common_interrupt+0x2e/0x34 [] ? list_del+0x21/0x90 [] ? trace_hardirqs_on+0xb/0x10 [] __napi_complete+0x1a/0x30 [] nv_napi_poll+0xd1/0x5c0 [] ? trace_hardirqs_on+0xb/0x10 [] net_rx_action+0x106/0x1b0 [] __do_softirq+0x6f/0x100 [] ? _spin_unlock+0x27/0x50 [] ? handle_fasteoi_irq+0x88/0xd0 [] do_softirq+0x5d/0x70 [] irq_exit+0x7d/0xa0 [] do_IRQ+0x42/0xa0 [] ? do_softirq+0x47/0x70 [] common_interrupt+0x2e/0x34 Signed-off-by: David S. Miller diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index d374650..11d5db1 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -3745,14 +3745,14 @@ static int nv_napi_poll(struct napi_struct *napi, int budget) mod_timer(&np->nic_poll, jiffies + POLL_WAIT); } spin_unlock_irqrestore(&np->lock, flags); - __napi_complete(napi); + napi_complete(napi); return rx_work; } if (rx_work < budget) { /* re-enable interrupts (msix not enabled in napi) */ - __napi_complete(napi); + napi_complete(napi); writel(np->irqmask, base + NvRegIrqMask); } -- cgit v0.10.2 From fd2bd98818fc1c9672241b845344cbfbb159a4f9 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Thu, 9 Apr 2009 14:13:07 +0800 Subject: ASoC: magician: remove un-necessary #include of pxa-regs.h and hardware.h Signed-off-by: Eric Miao Cc: Philipp Zabel Signed-off-by: Mark Brown diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index f7c4544..0625c34 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -27,8 +27,6 @@ #include #include -#include -#include #include #include #include "../codecs/uda1380.h" -- cgit v0.10.2 From 97c18e2c7a8e36d2d83d50ee070314aadac73a11 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 9 Apr 2009 10:35:47 +0800 Subject: module: try_then_request_module must wait Since the whole point of try_then_request_module is to retry the operation after a module has been loaded, we must wait for the module to fully load. Otherwise all sort of things start breaking, e.g., you won't be able to read your encrypted disks on the first attempt. Signed-off-by: Herbert Xu Tested-by: Maciej Rutecki Tested-by: Patrick McHardy Signed-off-by: Linus Torvalds diff --git a/include/linux/kmod.h b/include/linux/kmod.h index d5fa565..384ca8b 100644 --- a/include/linux/kmod.h +++ b/include/linux/kmod.h @@ -34,7 +34,7 @@ extern int __request_module(bool wait, const char *name, ...) \ #define request_module(mod...) __request_module(true, mod) #define request_module_nowait(mod...) __request_module(false, mod) #define try_then_request_module(x, mod...) \ - ((x) ?: (__request_module(false, mod), (x))) + ((x) ?: (__request_module(true, mod), (x))) #else static inline int request_module(const char *name, ...) { return -ENOSYS; } static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; } -- cgit v0.10.2 From ce60a2f15764f296b0467960759351702c7d2986 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 9 Apr 2009 17:37:52 +0200 Subject: fuse: fix argument type in fuse_get_user_pages() Fix the following warning: fs/fuse/file.c: In function 'fuse_direct_io': fs/fuse/file.c:1002: warning: passing argument 3 of 'fuse_get_user_pages' from incompatible pointer type This was introduced by commit f4975c67 "fuse: allow kernel to access "direct_io" files". Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 2b25133..0946861 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -938,9 +938,9 @@ static void fuse_release_user_pages(struct fuse_req *req, int write) } static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf, - unsigned *nbytesp, int write) + size_t *nbytesp, int write) { - unsigned nbytes = *nbytesp; + size_t nbytes = *nbytesp; unsigned long user_addr = (unsigned long) buf; unsigned offset = user_addr & ~PAGE_MASK; int npages; @@ -955,7 +955,7 @@ static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf, return 0; } - nbytes = min(nbytes, (unsigned) FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT); + nbytes = min_t(size_t, nbytes, FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT); npages = (nbytes + offset + PAGE_SIZE - 1) >> PAGE_SHIFT; npages = clamp(npages, 1, FUSE_MAX_PAGES_PER_REQ); down_read(¤t->mm->mmap_sem); -- cgit v0.10.2 From 3121bfe7631126d1b13064855ac2cfa164381bb0 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 9 Apr 2009 17:37:53 +0200 Subject: fuse: fix "direct_io" private mmap MAP_PRIVATE mmap could return stale data from the cache for "direct_io" files. Fix this by flushing the cache on mmap. Found with a slightly modified fsx-linux. Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 0946861..06f30e9 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1298,6 +1298,8 @@ static int fuse_direct_mmap(struct file *file, struct vm_area_struct *vma) if (vma->vm_flags & VM_MAYSHARE) return -ENODEV; + invalidate_inode_pages2(file->f_mapping); + return generic_file_mmap(file, vma); } -- cgit v0.10.2 From 6e498d5eb6afb50659b4b7fc302d480ca0ceaa93 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Apr 2009 16:40:41 +0100 Subject: ASoC: Disable S3C64xx support in Kconfig Due to the process and communications issues with the 2.6.30 S3C platform merges none of the underlying arch/arm code for S3C64xx audio support made it into mainline, rendering the drivers useless. Disable them in Kconfig to avoid user confusion - users patching in the required support can always reenable this too. Signed-off-by: Mark Brown diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 2f3a21e..df494d1 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -1,10 +1,10 @@ config SND_S3C24XX_SOC tristate "SoC Audio for the Samsung S3CXXXX chips" - depends on ARCH_S3C2410 || ARCH_S3C64XX + depends on ARCH_S3C2410 help Say Y or M if you want to add support for codecs attached to - the S3C24XX and S3C64XX AC97, I2S or SSP interface. You will - also need to select the audio interfaces to support below. + the S3C24XX AC97 or I2S interfaces. You will also need to + select the audio interfaces to support below. config SND_S3C24XX_SOC_I2S tristate -- cgit v0.10.2 From 36cd3c9f925b9307236505ae7ad1ad7ac4d4357c Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 9 Apr 2009 18:48:34 +0200 Subject: mutex: have non-spinning mutexes on s390 by default Impact: performance regression fix for s390 The adaptive spinning mutexes will not always do what one would expect on virtualized architectures like s390. Especially the cpu_relax() loop in mutex_spin_on_owner might hurt if the mutex holding cpu has been scheduled away by the hypervisor. We would end up in a cpu_relax() loop when there is no chance that the state of the mutex changes until the target cpu has been scheduled again by the hypervisor. For that reason we should change the default behaviour to no-spin on s390. We do have an instruction which allows to yield the current cpu in favour of a different target cpu. Also we have an instruction which allows us to figure out if the target cpu is physically backed. However we need to do some performance tests until we can come up with a solution that will do the right thing on s390. Signed-off-by: Heiko Carstens Acked-by: Peter Zijlstra Cc: Martin Schwidefsky Cc: Christian Borntraeger LKML-Reference: <20090409184834.7a0df7b2@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar diff --git a/arch/Kconfig b/arch/Kconfig index dc81b34..78a35e9 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -109,3 +109,6 @@ config HAVE_CLK config HAVE_DMA_API_DEBUG bool + +config HAVE_DEFAULT_NO_SPIN_MUTEXES + bool diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index dcb667c..2eca5fe 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -82,6 +82,7 @@ config S390 select USE_GENERIC_SMP_HELPERS if SMP select HAVE_SYSCALL_WRAPPERS select HAVE_FUNCTION_TRACER + select HAVE_DEFAULT_NO_SPIN_MUTEXES select HAVE_OPROFILE select HAVE_KPROBES select HAVE_KRETPROBES diff --git a/kernel/mutex.c b/kernel/mutex.c index 5d79781..507cf2b 100644 --- a/kernel/mutex.c +++ b/kernel/mutex.c @@ -148,7 +148,8 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, preempt_disable(); mutex_acquire(&lock->dep_map, subclass, 0, ip); -#if defined(CONFIG_SMP) && !defined(CONFIG_DEBUG_MUTEXES) +#if defined(CONFIG_SMP) && !defined(CONFIG_DEBUG_MUTEXES) && \ + !defined(CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES) /* * Optimistic spinning. * -- cgit v0.10.2 From 91e58b6e95a9c6b9efd928ae352eae5e75ae598c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 9 Apr 2009 18:18:47 +0100 Subject: MN10300: Convert obsolete no_irq_type to no_irq_chip Convert the last remaining users to no_irq_chip. Signed-off-by: Thomas Gleixner Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 50fdb5c..4c3c58e 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -140,7 +140,7 @@ void __init init_IRQ(void) int irq; for (irq = 0; irq < NR_IRQS; irq++) - if (irq_desc[irq].chip == &no_irq_type) + if (irq_desc[irq].chip == &no_irq_chip) /* due to the PIC latching interrupt requests, even * when the IRQ is disabled, IRQ_PENDING is superfluous * and we can use handle_level_irq() for edge-triggered -- cgit v0.10.2 From f802d969b6a89d3f9b67ef879179824d53420ebe Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 9 Apr 2009 10:36:54 -0700 Subject: sh: Add support for DMA API debugging. This wires up support for the generic DMA API debugging. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5e4babe..45f4a32 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -14,6 +14,7 @@ config SUPERH select HAVE_GENERIC_DMA_COHERENT select HAVE_IOREMAP_PROT if MMU select HAVE_ARCH_TRACEHOOK + select HAVE_DMA_API_DEBUG help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h index 627315e..ea9d4f4 100644 --- a/arch/sh/include/asm/dma-mapping.h +++ b/arch/sh/include/asm/dma-mapping.h @@ -3,6 +3,7 @@ #include #include +#include #include #include #include @@ -38,16 +39,26 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction dir) { + dma_addr_t addr = virt_to_phys(ptr); + #if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) if (dev->bus == &pci_bus_type) - return virt_to_phys(ptr); + return addr; #endif dma_cache_sync(dev, ptr, size, dir); - return virt_to_phys(ptr); + debug_dma_map_page(dev, virt_to_page(ptr), + (unsigned long)ptr & ~PAGE_MASK, size, + dir, addr, true); + + return addr; } -#define dma_unmap_single(dev, addr, size, dir) do { } while (0) +static inline void dma_unmap_single(struct device *dev, dma_addr_t addr, + size_t size, enum dma_data_direction dir) +{ + debug_dma_unmap_page(dev, addr, size, dir, true); +} static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir) @@ -59,12 +70,19 @@ static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); #endif sg[i].dma_address = sg_phys(&sg[i]); + sg[i].dma_length = sg[i].length; } + debug_dma_map_sg(dev, sg, nents, i, dir); + return nents; } -#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + debug_dma_unmap_sg(dev, sg, nents, dir); +} static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, @@ -111,6 +129,7 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); #endif sg[i].dma_address = sg_phys(&sg[i]); + sg[i].dma_length = sg[i].length; } } @@ -119,6 +138,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev, enum dma_data_direction dir) { dma_sync_single(dev, dma_handle, size, dir); + debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir); } static inline void dma_sync_single_for_device(struct device *dev, @@ -127,6 +147,7 @@ static inline void dma_sync_single_for_device(struct device *dev, enum dma_data_direction dir) { dma_sync_single(dev, dma_handle, size, dir); + debug_dma_sync_single_for_device(dev, dma_handle, size, dir); } static inline void dma_sync_single_range_for_cpu(struct device *dev, @@ -136,6 +157,8 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev, enum dma_data_direction direction) { dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); + debug_dma_sync_single_range_for_cpu(dev, dma_handle, + offset, size, direction); } static inline void dma_sync_single_range_for_device(struct device *dev, @@ -145,6 +168,8 @@ static inline void dma_sync_single_range_for_device(struct device *dev, enum dma_data_direction direction) { dma_sync_single_for_device(dev, dma_handle+offset, size, direction); + debug_dma_sync_single_range_for_device(dev, dma_handle, + offset, size, direction); } @@ -153,6 +178,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev, enum dma_data_direction dir) { dma_sync_sg(dev, sg, nelems, dir); + debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir); } static inline void dma_sync_sg_for_device(struct device *dev, @@ -160,9 +186,9 @@ static inline void dma_sync_sg_for_device(struct device *dev, enum dma_data_direction dir) { dma_sync_sg(dev, sg, nelems, dir); + debug_dma_sync_sg_for_device(dev, sg, nelems, dir); } - static inline int dma_get_cache_alignment(void) { /* diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h index 2084d03..c693d26 100644 --- a/arch/sh/include/asm/scatterlist.h +++ b/arch/sh/include/asm/scatterlist.h @@ -5,12 +5,13 @@ struct scatterlist { #ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; + unsigned long sg_magic; #endif - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - dma_addr_t dma_address; - unsigned int length; + unsigned long page_link; + unsigned int offset; /* for highmem, page offset */ + unsigned int length; + dma_addr_t dma_address; + unsigned int dma_length; }; #define ISA_DMA_THRESHOLD PHYS_ADDR_MASK diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index edcd5fb..8c9ee85 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -45,6 +46,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size, split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order); *dma_handle = virt_to_phys(ret); + + debug_dma_alloc_coherent(dev, size, *dma_handle, ret_nocache); + return ret_nocache; } EXPORT_SYMBOL(dma_alloc_coherent); @@ -56,12 +60,15 @@ void dma_free_coherent(struct device *dev, size_t size, unsigned long pfn = dma_handle >> PAGE_SHIFT; int k; - if (!dma_release_from_coherent(dev, order, vaddr)) { - WARN_ON(irqs_disabled()); /* for portability */ - for (k = 0; k < (1 << order); k++) - __free_pages(pfn_to_page(pfn + k), 0); - iounmap(vaddr); - } + WARN_ON(irqs_disabled()); /* for portability */ + + if (dma_release_from_coherent(dev, order, vaddr)) + return; + + debug_dma_free_coherent(dev, size, vaddr, dma_handle); + for (k = 0; k < (1 << order); k++) + __free_pages(pfn_to_page(pfn + k), 0); + iounmap(vaddr); } EXPORT_SYMBOL(dma_free_coherent); -- cgit v0.10.2 From 11ff5f6affe9b75f115a900a5584db339d46002b Mon Sep 17 00:00:00 2001 From: Stoyan Gaydarov Date: Thu, 9 Apr 2009 17:10:28 +0100 Subject: afs: BUG to BUG_ON changes Signed-off-by: Stoyan Gaydarov Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/fs/afs/netdevices.c b/fs/afs/netdevices.c index 49f1894..7ad3650 100644 --- a/fs/afs/netdevices.c +++ b/fs/afs/netdevices.c @@ -20,8 +20,7 @@ int afs_get_MAC_address(u8 *mac, size_t maclen) struct net_device *dev; int ret = -ENODEV; - if (maclen != ETH_ALEN) - BUG(); + BUG_ON(maclen != ETH_ALEN); rtnl_lock(); dev = __dev_getfirstbyhwtype(&init_net, ARPHRD_ETHER); -- cgit v0.10.2 From 34574dd10b6d0697b86703388d6d6af9cbf4bb48 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 9 Apr 2009 17:14:05 +0100 Subject: keys: Handle there being no fallback destination keyring for request_key() When request_key() is called, without there being any standard process keyrings on which to fall back if a destination keyring is not specified, an oops is liable to occur when construct_alloc_key() calls down_write() on dest_keyring's semaphore. Due to function inlining this may be seen as an oops in down_write() as called from request_key_and_link(). This situation crops up during boot, where request_key() is called from within the kernel (such as in CIFS mounts) where nobody is actually logged in, and so PAM has not had a chance to create a session keyring and user keyrings to act as the fallback. To fix this, make construct_alloc_key() not attempt to cache a key if there is no fallback key if no destination keyring is given specifically. Signed-off-by: David Howells Tested-by: Jeff Layton Signed-off-by: Linus Torvalds diff --git a/security/keys/request_key.c b/security/keys/request_key.c index 22a3158..03fe63e 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -311,7 +311,8 @@ static int construct_alloc_key(struct key_type *type, set_bit(KEY_FLAG_USER_CONSTRUCT, &key->flags); - down_write(&dest_keyring->sem); + if (dest_keyring) + down_write(&dest_keyring->sem); /* attach the key to the destination keyring under lock, but we do need * to do another check just in case someone beat us to it whilst we @@ -322,10 +323,12 @@ static int construct_alloc_key(struct key_type *type, if (!IS_ERR(key_ref)) goto key_already_present; - __key_link(dest_keyring, key); + if (dest_keyring) + __key_link(dest_keyring, key); mutex_unlock(&key_construction_mutex); - up_write(&dest_keyring->sem); + if (dest_keyring) + up_write(&dest_keyring->sem); mutex_unlock(&user->cons_lock); *_key = key; kleave(" = 0 [%d]", key_serial(key)); -- cgit v0.10.2 From 6fde836b54f1f0ca3d3c8b7aaf44165a08fe0f9f Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 9 Apr 2009 17:32:55 +0100 Subject: FRV: Use in NOMMU mode asm-frv/pgtable.h could just #include in NOMMU mode rather than #defining macros for lazy MMU and CPU stuff. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h index e16fdb1..3323301 100644 --- a/include/asm-frv/pgtable.h +++ b/include/asm-frv/pgtable.h @@ -71,10 +71,8 @@ static inline int pte_file(pte_t pte) { return 0; } #define swapper_pg_dir ((pgd_t *) NULL) #define pgtable_cache_init() do {} while (0) -#define arch_enter_lazy_mmu_mode() do {} while (0) -#define arch_leave_lazy_mmu_mode() do {} while (0) -#define arch_enter_lazy_cpu_mode() do {} while (0) -#define arch_leave_lazy_cpu_mode() do {} while (0) + +#include #else /* !CONFIG_MMU */ /*****************************************************************************/ -- cgit v0.10.2 From 62b8e680e61d3f48f2a12ee248ca03ea8f376926 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 9 Apr 2009 18:41:23 +0100 Subject: MN10300: Kill MN10300's own profiling Kconfig Kill MN10300's own profiling Kconfig as this is superfluous given that the profiling options have moved to init/Kconfig and arch/Kconfig. Not only is this now superfluous, but the dependencies are not correct. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 41d1682..3559267 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -370,5 +370,3 @@ source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" - -source "arch/mn10300/oprofile/Kconfig" diff --git a/arch/mn10300/oprofile/Kconfig b/arch/mn10300/oprofile/Kconfig deleted file mode 100644 index 19d3773..0000000 --- a/arch/mn10300/oprofile/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - -config PROFILING - bool "Profiling support (EXPERIMENTAL)" - help - Say Y here to enable the extended profiling support mechanisms used - by profilers such as OProfile. - - -config OPROFILE - tristate "OProfile system profiling (EXPERIMENTAL)" - depends on PROFILING - help - OProfile is a profiling system capable of profiling the - whole system, include the kernel, kernel modules, libraries, - and applications. - - If unsure, say N. - -endmenu - -- cgit v0.10.2 From 3b3809ac5375f614bbf8671cddeae3c693aa584e Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 9 Apr 2009 10:55:33 -0700 Subject: x86: fix set_fixmap to use phys_addr_t Use phys_addr_t for receiving a physical address argument instead of unsigned long. This allows fixmap to handle pages higher than 4GB on x86-32. Signed-off-by: Masami Hiramatsu Cc: Ingo Molnar Acked-by: Mathieu Desnoyers Signed-off-by: Linus Torvalds diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 81937a5..2d81af3 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -151,11 +151,11 @@ extern pte_t *pkmap_page_table; void __native_set_fixmap(enum fixed_addresses idx, pte_t pte); void native_set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags); + phys_addr_t phys, pgprot_t flags); #ifndef CONFIG_PARAVIRT static inline void __set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags) + phys_addr_t phys, pgprot_t flags) { native_set_fixmap(idx, phys, flags); } diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 7727aa8..378e369 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -347,7 +347,7 @@ struct pv_mmu_ops { /* Sometimes the physical address is a pfn, and sometimes its an mfn. We can tell which is which from the index. */ void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx, - unsigned long phys, pgprot_t flags); + phys_addr_t phys, pgprot_t flags); }; struct raw_spinlock; @@ -1432,7 +1432,7 @@ static inline void arch_leave_lazy_mmu_mode(void) void arch_flush_lazy_mmu_mode(void); static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx, - unsigned long phys, pgprot_t flags) + phys_addr_t phys, pgprot_t flags) { pv_mmu_ops.set_fixmap(idx, phys, flags); } diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 5b7c7c8..7aa03a5 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -345,7 +345,8 @@ void __native_set_fixmap(enum fixed_addresses idx, pte_t pte) fixmaps_set++; } -void native_set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags) +void native_set_fixmap(enum fixed_addresses idx, phys_addr_t phys, + pgprot_t flags) { __native_set_fixmap(idx, pfn_pte(phys >> PAGE_SHIFT, flags)); } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index db3802f..2a81838 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1750,7 +1750,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, } #endif /* CONFIG_X86_64 */ -static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot) +static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) { pte_t pte; -- cgit v0.10.2 From 187934655fa0637d4ef3967d4543c6dcccf33058 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 10 Apr 2009 01:48:01 +0100 Subject: FRV: Fix indentation errors to keep git-am happy when moving arch header files Fix indentation errors to keep git-am happy when moving arch header files. Signed-off-by: David Howells diff --git a/include/asm-frv/thread_info.h b/include/asm-frv/thread_info.h index b7ac6bf..bb53ab7 100644 --- a/include/asm-frv/thread_info.h +++ b/include/asm-frv/thread_info.h @@ -38,9 +38,9 @@ struct thread_info { int preempt_count; /* 0 => preemptable, <0 => BUG */ mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF for user-thead - 0-0xFFFFFFFF for kernel-thread - */ + * 0-0xBFFFFFFF for user-thead + * 0-0xFFFFFFFF for kernel-thread + */ struct restart_block restart_block; __u8 supervisor_stack[0]; -- cgit v0.10.2 From e69cc9278831139660cb99bde52908f145338d77 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 10 Apr 2009 01:48:06 +0100 Subject: FRV: Move to arch/frv/include/asm/ Move arch headers from include/asm-frv/ to arch/frv/include/asm/. Signed-off-by: David Howells diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild new file mode 100644 index 0000000..0f8956d --- /dev/null +++ b/arch/frv/include/asm/Kbuild @@ -0,0 +1,5 @@ +include include/asm-generic/Kbuild.asm + +header-y += registers.h + +unifdef-y += termios.h diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h new file mode 100644 index 0000000..296c35c --- /dev/null +++ b/arch/frv/include/asm/atomic.h @@ -0,0 +1,198 @@ +/* atomic.h: atomic operation emulation for FR-V + * + * For an explanation of how atomic ops work in this arch, see: + * Documentation/frv/atomic-ops.txt + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_ATOMIC_H +#define _ASM_ATOMIC_H + +#include +#include +#include + +#ifdef CONFIG_SMP +#error not SMP safe +#endif + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + * We do not have SMP systems, so we don't have to deal with that. + */ + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#define ATOMIC_INIT(i) { (i) } +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = (i)) + +#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long val; + + asm("0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " add%I2 %1,%2,%1 \n" + " cst.p %1,%M0 ,cc3,#1 \n" + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ + " beq icc3,#0,0b \n" + : "+U"(v->counter), "=&r"(val) + : "NPr"(i) + : "memory", "cc7", "cc3", "icc3" + ); + + return val; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long val; + + asm("0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " sub%I2 %1,%2,%1 \n" + " cst.p %1,%M0 ,cc3,#1 \n" + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ + " beq icc3,#0,0b \n" + : "+U"(v->counter), "=&r"(val) + : "NPr"(i) + : "memory", "cc7", "cc3", "icc3" + ); + + return val; +} + +#else + +extern int atomic_add_return(int i, atomic_t *v); +extern int atomic_sub_return(int i, atomic_t *v); + +#endif + +static inline int atomic_add_negative(int i, atomic_t *v) +{ + return atomic_add_return(i, v) < 0; +} + +static inline void atomic_add(int i, atomic_t *v) +{ + atomic_add_return(i, v); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + atomic_sub_return(i, v); +} + +static inline void atomic_inc(atomic_t *v) +{ + atomic_add_return(1, v); +} + +static inline void atomic_dec(atomic_t *v) +{ + atomic_sub_return(1, v); +} + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) + +/*****************************************************************************/ +/* + * exchange value with memory + */ +#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS + +#define xchg(ptr, x) \ +({ \ + __typeof__(ptr) __xg_ptr = (ptr); \ + __typeof__(*(ptr)) __xg_orig; \ + \ + switch (sizeof(__xg_orig)) { \ + case 4: \ + asm volatile( \ + "swap%I0 %M0,%1" \ + : "+m"(*__xg_ptr), "=r"(__xg_orig) \ + : "1"(x) \ + : "memory" \ + ); \ + break; \ + \ + default: \ + __xg_orig = (__typeof__(__xg_orig))0; \ + asm volatile("break"); \ + break; \ + } \ + \ + __xg_orig; \ +}) + +#else + +extern uint32_t __xchg_32(uint32_t i, volatile void *v); + +#define xchg(ptr, x) \ +({ \ + __typeof__(ptr) __xg_ptr = (ptr); \ + __typeof__(*(ptr)) __xg_orig; \ + \ + switch (sizeof(__xg_orig)) { \ + case 4: __xg_orig = (__typeof__(*(ptr))) __xchg_32((uint32_t) x, __xg_ptr); break; \ + default: \ + __xg_orig = (__typeof__(__xg_orig))0; \ + asm volatile("break"); \ + break; \ + } \ + __xg_orig; \ +}) + +#endif + +#define tas(ptr) (xchg((ptr), 1)) + +#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#include +#endif /* _ASM_ATOMIC_H */ diff --git a/arch/frv/include/asm/auxvec.h b/arch/frv/include/asm/auxvec.h new file mode 100644 index 0000000..0771077 --- /dev/null +++ b/arch/frv/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __FRV_AUXVEC_H +#define __FRV_AUXVEC_H + +#endif diff --git a/arch/frv/include/asm/ax88796.h b/arch/frv/include/asm/ax88796.h new file mode 100644 index 0000000..637e980 --- /dev/null +++ b/arch/frv/include/asm/ax88796.h @@ -0,0 +1,22 @@ +/* ax88796.h: access points to the driver for the AX88796 NE2000 clone + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_AX88796_H +#define _ASM_AX88796_H + +#include + +#define AX88796_IOADDR (__region_CS1 + 0x200) +#define AX88796_IRQ IRQ_CPU_EXTERNAL7 +#define AX88796_FULL_DUPLEX 0 /* force full duplex */ +#define AX88796_BUS_INFO "CS1#+0x200" /* bus info for ethtool */ + +#endif /* _ASM_AX88796_H */ diff --git a/arch/frv/include/asm/bitops.h b/arch/frv/include/asm/bitops.h new file mode 100644 index 0000000..287f6f6 --- /dev/null +++ b/arch/frv/include/asm/bitops.h @@ -0,0 +1,412 @@ +/* bitops.h: bit operations for the Fujitsu FR-V CPUs + * + * For an explanation of how atomic ops work in this arch, see: + * Documentation/frv/atomic-ops.txt + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_BITOPS_H +#define _ASM_BITOPS_H + +#include +#include + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS +static inline +unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v) +{ + unsigned long old, tmp; + + asm volatile( + "0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " and%I3 %1,%3,%2 \n" + " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */ + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */ + " beq icc3,#0,0b \n" + : "+U"(*v), "=&r"(old), "=r"(tmp) + : "NPr"(~mask) + : "memory", "cc7", "cc3", "icc3" + ); + + return old; +} + +static inline +unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v) +{ + unsigned long old, tmp; + + asm volatile( + "0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " or%I3 %1,%3,%2 \n" + " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */ + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */ + " beq icc3,#0,0b \n" + : "+U"(*v), "=&r"(old), "=r"(tmp) + : "NPr"(mask) + : "memory", "cc7", "cc3", "icc3" + ); + + return old; +} + +static inline +unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v) +{ + unsigned long old, tmp; + + asm volatile( + "0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " xor%I3 %1,%3,%2 \n" + " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */ + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */ + " beq icc3,#0,0b \n" + : "+U"(*v), "=&r"(old), "=r"(tmp) + : "NPr"(mask) + : "memory", "cc7", "cc3", "icc3" + ); + + return old; +} + +#else + +extern unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v); +extern unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v); +extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v); + +#endif + +#define atomic_clear_mask(mask, v) atomic_test_and_ANDNOT_mask((mask), (v)) +#define atomic_set_mask(mask, v) atomic_test_and_OR_mask((mask), (v)) + +static inline int test_and_clear_bit(int nr, volatile void *addr) +{ + volatile unsigned long *ptr = addr; + unsigned long mask = 1UL << (nr & 31); + ptr += nr >> 5; + return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0; +} + +static inline int test_and_set_bit(int nr, volatile void *addr) +{ + volatile unsigned long *ptr = addr; + unsigned long mask = 1UL << (nr & 31); + ptr += nr >> 5; + return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0; +} + +static inline int test_and_change_bit(int nr, volatile void *addr) +{ + volatile unsigned long *ptr = addr; + unsigned long mask = 1UL << (nr & 31); + ptr += nr >> 5; + return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0; +} + +static inline void clear_bit(int nr, volatile void *addr) +{ + test_and_clear_bit(nr, addr); +} + +static inline void set_bit(int nr, volatile void *addr) +{ + test_and_set_bit(nr, addr); +} + +static inline void change_bit(int nr, volatile void * addr) +{ + test_and_change_bit(nr, addr); +} + +static inline void __clear_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 31); + *a &= ~mask; +} + +static inline void __set_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 31); + *a |= mask; +} + +static inline void __change_bit(int nr, volatile void *addr) +{ + volatile unsigned long *a = addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 31); + *a ^= mask; +} + +static inline int __test_and_clear_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask, retval; + + a += nr >> 5; + mask = 1 << (nr & 31); + retval = (mask & *a) != 0; + *a &= ~mask; + return retval; +} + +static inline int __test_and_set_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask, retval; + + a += nr >> 5; + mask = 1 << (nr & 31); + retval = (mask & *a) != 0; + *a |= mask; + return retval; +} + +static inline int __test_and_change_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask, retval; + + a += nr >> 5; + mask = 1 << (nr & 31); + retval = (mask & *a) != 0; + *a ^= mask; + return retval; +} + +/* + * This routine doesn't need to be atomic. + */ +static inline int __constant_test_bit(int nr, const volatile void * addr) +{ + return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; +} + +static inline int __test_bit(int nr, const volatile void * addr) +{ + int * a = (int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + return ((mask & *a) != 0); +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + __constant_test_bit((nr),(addr)) : \ + __test_bit((nr),(addr))) + +#include + +/** + * fls - find last bit set + * @x: the word to search + * + * This is defined the same way as ffs: + * - return 32..1 to indicate bit 31..0 most significant bit set + * - return 0 to indicate no bits set + */ +#define fls(x) \ +({ \ + int bit; \ + \ + asm(" subcc %1,gr0,gr0,icc0 \n" \ + " ckne icc0,cc4 \n" \ + " cscan.p %1,gr0,%0 ,cc4,#1 \n" \ + " csub %0,%0,%0 ,cc4,#0 \n" \ + " csub %2,%0,%0 ,cc4,#1 \n" \ + : "=&r"(bit) \ + : "r"(x), "r"(32) \ + : "icc0", "cc4" \ + ); \ + \ + bit; \ +}) + +/** + * fls64 - find last bit set in a 64-bit value + * @n: the value to search + * + * This is defined the same way as ffs: + * - return 64..1 to indicate bit 63..0 most significant bit set + * - return 0 to indicate no bits set + */ +static inline __attribute__((const)) +int fls64(u64 n) +{ + union { + u64 ll; + struct { u32 h, l; }; + } _; + int bit, x, y; + + _.ll = n; + + asm(" subcc.p %3,gr0,gr0,icc0 \n" + " subcc %4,gr0,gr0,icc1 \n" + " ckne icc0,cc4 \n" + " ckne icc1,cc5 \n" + " norcr cc4,cc5,cc6 \n" + " csub.p %0,%0,%0 ,cc6,1 \n" + " orcr cc5,cc4,cc4 \n" + " andcr cc4,cc5,cc4 \n" + " cscan.p %3,gr0,%0 ,cc4,0 \n" + " setlos #64,%1 \n" + " cscan.p %4,gr0,%0 ,cc4,1 \n" + " setlos #32,%2 \n" + " csub.p %1,%0,%0 ,cc4,0 \n" + " csub %2,%0,%0 ,cc4,1 \n" + : "=&r"(bit), "=r"(x), "=r"(y) + : "0r"(_.h), "r"(_.l) + : "icc0", "icc1", "cc4", "cc5", "cc6" + ); + return bit; + +} + +/** + * ffs - find first bit set + * @x: the word to search + * + * - return 32..1 to indicate bit 31..0 most least significant bit set + * - return 0 to indicate no bits set + */ +static inline __attribute__((const)) +int ffs(int x) +{ + /* Note: (x & -x) gives us a mask that is the least significant + * (rightmost) 1-bit of the value in x. + */ + return fls(x & -x); +} + +/** + * __ffs - find first bit set + * @x: the word to search + * + * - return 31..0 to indicate bit 31..0 most least significant bit set + * - if no bits are set in x, the result is undefined + */ +static inline __attribute__((const)) +int __ffs(unsigned long x) +{ + int bit; + asm("scan %1,gr0,%0" : "=r"(bit) : "r"(x & -x)); + return 31 - bit; +} + +/** + * __fls - find last (most-significant) set bit in a long word + * @word: the word to search + * + * Undefined if no set bit exists, so code should check against 0 first. + */ +static inline unsigned long __fls(unsigned long word) +{ + unsigned long bit; + asm("scan %1,gr0,%0" : "=r"(bit) : "r"(word)); + return bit; +} + +/* + * special slimline version of fls() for calculating ilog2_u32() + * - note: no protection against n == 0 + */ +#define ARCH_HAS_ILOG2_U32 +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n)); + return 31 - bit; +} + +/* + * special slimline version of fls64() for calculating ilog2_u64() + * - note: no protection against n == 0 + */ +#define ARCH_HAS_ILOG2_U64 +static inline __attribute__((const)) +int __ilog2_u64(u64 n) +{ + union { + u64 ll; + struct { u32 h, l; }; + } _; + int bit, x, y; + + _.ll = n; + + asm(" subcc %3,gr0,gr0,icc0 \n" + " ckeq icc0,cc4 \n" + " cscan.p %3,gr0,%0 ,cc4,0 \n" + " setlos #63,%1 \n" + " cscan.p %4,gr0,%0 ,cc4,1 \n" + " setlos #31,%2 \n" + " csub.p %1,%0,%0 ,cc4,0 \n" + " csub %2,%0,%0 ,cc4,1 \n" + : "=&r"(bit), "=r"(x), "=r"(y) + : "0r"(_.h), "r"(_.l) + : "icc0", "cc4" + ); + return bit; +} + +#include +#include +#include + +#include + +#define ext2_set_bit_atomic(lock,nr,addr) test_and_set_bit ((nr) ^ 0x18, (addr)) +#define ext2_clear_bit_atomic(lock,nr,addr) test_and_clear_bit((nr) ^ 0x18, (addr)) + +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_BITOPS_H */ diff --git a/arch/frv/include/asm/bug.h b/arch/frv/include/asm/bug.h new file mode 100644 index 0000000..6b1b44d --- /dev/null +++ b/arch/frv/include/asm/bug.h @@ -0,0 +1,53 @@ +/* bug.h: FRV bug trapping + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_BUG_H +#define _ASM_BUG_H + +#include + +#ifdef CONFIG_BUG +/* + * Tell the user there is some problem. + */ +extern asmlinkage void __debug_bug_trap(int signr); + +#ifdef CONFIG_NO_KERNEL_MSG +#define _debug_bug_printk() +#else +extern void __debug_bug_printk(const char *file, unsigned line); +#define _debug_bug_printk() __debug_bug_printk(__FILE__, __LINE__) +#endif + +#define _debug_bug_trap(signr) \ +do { \ + __debug_bug_trap(signr); \ + asm volatile("nop"); \ +} while(0) + +#define HAVE_ARCH_BUG +#define BUG() \ +do { \ + _debug_bug_printk(); \ + _debug_bug_trap(6 /*SIGABRT*/); \ +} while (0) + +#ifdef CONFIG_GDBSTUB +#define HAVE_ARCH_KGDB_RAISE +#define kgdb_raise(signr) do { _debug_bug_trap(signr); } while(0) + +#define HAVE_ARCH_KGDB_BAD_PAGE +#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0) +#endif +#endif + +#include + +#endif diff --git a/arch/frv/include/asm/bugs.h b/arch/frv/include/asm/bugs.h new file mode 100644 index 0000000..f2382be --- /dev/null +++ b/arch/frv/include/asm/bugs.h @@ -0,0 +1,14 @@ +/* bugs.h: arch bug checking entry + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +static inline void check_bugs(void) +{ +} diff --git a/arch/frv/include/asm/busctl-regs.h b/arch/frv/include/asm/busctl-regs.h new file mode 100644 index 0000000..bb0ff48 --- /dev/null +++ b/arch/frv/include/asm/busctl-regs.h @@ -0,0 +1,41 @@ +/* busctl-regs.h: FR400-series CPU bus controller registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_BUSCTL_REGS_H +#define _ASM_BUSCTL_REGS_H + +/* bus controller registers */ +#define __get_LGCR() ({ *(volatile unsigned long *)(0xfe000010); }) +#define __get_LMAICR() ({ *(volatile unsigned long *)(0xfe000030); }) +#define __get_LEMBR() ({ *(volatile unsigned long *)(0xfe000040); }) +#define __get_LEMAM() ({ *(volatile unsigned long *)(0xfe000048); }) +#define __get_LCR(R) ({ *(volatile unsigned long *)(0xfe000100 + 8*(R)); }) +#define __get_LSBR(R) ({ *(volatile unsigned long *)(0xfe000c00 + 8*(R)); }) +#define __get_LSAM(R) ({ *(volatile unsigned long *)(0xfe000d00 + 8*(R)); }) + +#define __set_LGCR(V) do { *(volatile unsigned long *)(0xfe000010) = (V); } while(0) +#define __set_LMAICR(V) do { *(volatile unsigned long *)(0xfe000030) = (V); } while(0) +#define __set_LEMBR(V) do { *(volatile unsigned long *)(0xfe000040) = (V); } while(0) +#define __set_LEMAM(V) do { *(volatile unsigned long *)(0xfe000048) = (V); } while(0) +#define __set_LCR(R,V) do { *(volatile unsigned long *)(0xfe000100 + 8*(R)) = (V); } while(0) +#define __set_LSBR(R,V) do { *(volatile unsigned long *)(0xfe000c00 + 8*(R)) = (V); } while(0) +#define __set_LSAM(R,V) do { *(volatile unsigned long *)(0xfe000d00 + 8*(R)) = (V); } while(0) + +/* FR401 SDRAM controller registers */ +#define __get_DBR(R) ({ *(volatile unsigned long *)(0xfe000e00 + 8*(R)); }) +#define __get_DAM(R) ({ *(volatile unsigned long *)(0xfe000f00 + 8*(R)); }) + +/* FR551 SDRAM controller registers */ +#define __get_DARS(R) ({ *(volatile unsigned long *)(0xfeff0100 + 8*(R)); }) +#define __get_DAMK(R) ({ *(volatile unsigned long *)(0xfeff0110 + 8*(R)); }) + + +#endif /* _ASM_BUSCTL_REGS_H */ diff --git a/arch/frv/include/asm/byteorder.h b/arch/frv/include/asm/byteorder.h new file mode 100644 index 0000000..f29b759 --- /dev/null +++ b/arch/frv/include/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _ASM_BYTEORDER_H +#define _ASM_BYTEORDER_H + +#include + +#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/frv/include/asm/cache.h b/arch/frv/include/asm/cache.h new file mode 100644 index 0000000..2797163 --- /dev/null +++ b/arch/frv/include/asm/cache.h @@ -0,0 +1,23 @@ +/* cache.h: FRV cache definitions + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __ASM_CACHE_H +#define __ASM_CACHE_H + + +/* bytes per L1 cache line */ +#define L1_CACHE_SHIFT (CONFIG_FRV_L1_CACHE_SHIFT) +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define __cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) +#define ____cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) + +#endif diff --git a/arch/frv/include/asm/cacheflush.h b/arch/frv/include/asm/cacheflush.h new file mode 100644 index 0000000..432a69e --- /dev/null +++ b/arch/frv/include/asm/cacheflush.h @@ -0,0 +1,104 @@ +/* cacheflush.h: FRV cache flushing routines + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_CACHEFLUSH_H +#define _ASM_CACHEFLUSH_H + +/* Keep includes the same across arches. */ +#include + +/* + * virtually-indexed cache management (our cache is physically indexed) + */ +#define flush_cache_all() do {} while(0) +#define flush_cache_mm(mm) do {} while(0) +#define flush_cache_dup_mm(mm) do {} while(0) +#define flush_cache_range(mm, start, end) do {} while(0) +#define flush_cache_page(vma, vmaddr, pfn) do {} while(0) +#define flush_cache_vmap(start, end) do {} while(0) +#define flush_cache_vunmap(start, end) do {} while(0) +#define flush_dcache_mmap_lock(mapping) do {} while(0) +#define flush_dcache_mmap_unlock(mapping) do {} while(0) + +/* + * physically-indexed cache management + * - see arch/frv/lib/cache.S + */ +extern void frv_dcache_writeback(unsigned long start, unsigned long size); +extern void frv_cache_invalidate(unsigned long start, unsigned long size); +extern void frv_icache_invalidate(unsigned long start, unsigned long size); +extern void frv_cache_wback_inv(unsigned long start, unsigned long size); + +static inline void __flush_cache_all(void) +{ + asm volatile(" dcef @(gr0,gr0),#1 \n" + " icei @(gr0,gr0),#1 \n" + " membar \n" + : : : "memory" + ); +} + +/* dcache/icache coherency... */ +#ifdef CONFIG_MMU +extern void flush_dcache_page(struct page *page); +#else +static inline void flush_dcache_page(struct page *page) +{ + unsigned long addr = page_to_phys(page); + frv_dcache_writeback(addr, addr + PAGE_SIZE); +} +#endif + +static inline void flush_page_to_ram(struct page *page) +{ + flush_dcache_page(page); +} + +static inline void flush_icache(void) +{ + __flush_cache_all(); +} + +static inline void flush_icache_range(unsigned long start, unsigned long end) +{ + frv_cache_wback_inv(start, end); +} + +#ifdef CONFIG_MMU +extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long start, unsigned long len); +#else +static inline void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long start, unsigned long len) +{ + frv_cache_wback_inv(start, start + len); +} +#endif + +static inline void flush_icache_page(struct vm_area_struct *vma, struct page *page) +{ + flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE); +} + +/* + * permit ptrace to access another process's address space through the icache + * and the dcache + */ +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { \ + memcpy((dst), (src), (len)); \ + flush_icache_user_range((vma), (page), (vaddr), (len)); \ +} while(0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy((dst), (src), (len)) + +#endif /* _ASM_CACHEFLUSH_H */ diff --git a/arch/frv/include/asm/checksum.h b/arch/frv/include/asm/checksum.h new file mode 100644 index 0000000..269da09 --- /dev/null +++ b/arch/frv/include/asm/checksum.h @@ -0,0 +1,180 @@ +/* checksum.h: FRV checksumming + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_CHECKSUM_H +#define _ASM_CHECKSUM_H + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *csum_err); + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + */ +static inline +__sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int tmp, inc, sum = 0; + + asm(" addcc gr0,gr0,gr0,icc0\n" /* clear icc0.C */ + " subi %1,#4,%1 \n" + "0: \n" + " ldu.p @(%1,%3),%4 \n" + " subicc %2,#1,%2,icc1 \n" + " addxcc.p %4,%0,%0,icc0 \n" + " bhi icc1,#2,0b \n" + + /* fold the 33-bit result into 16-bits */ + " addxcc gr0,%0,%0,icc0 \n" + " srli %0,#16,%1 \n" + " sethi #0,%0 \n" + " add %1,%0,%0 \n" + " srli %0,#16,%1 \n" + " add %1,%0,%0 \n" + + : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp) + : "0" (sum), "1" (iph), "2" (ihl), "3" (4), + "m"(*(volatile struct { int _[100]; } *)iph) + : "icc0", "icc1", "memory" + ); + + return (__force __sum16)~sum; +} + +/* + * Fold a partial checksum + */ +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp; + + asm(" srli %0,#16,%1 \n" + " sethi #0,%0 \n" + " add %1,%0,%0 \n" + " srli %0,#16,%1 \n" + " add %1,%0,%0 \n" + : "=r"(sum), "=&r"(tmp) + : "0"(sum) + ); + + return (__force __sum16)~sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + asm(" addcc %1,%0,%0,icc0 \n" + " addxcc %2,%0,%0,icc0 \n" + " addxcc %3,%0,%0,icc0 \n" + " addxcc gr0,%0,%0,icc0 \n" + : "=r" (sum) + : "r" (daddr), "r" (saddr), "r" (len + proto), "0"(sum) + : "icc0" + ); + return sum; +} + +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +extern __sum16 ip_compute_csum(const void *buff, int len); + +#define _HAVE_ARCH_IPV6_CSUM +static inline __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, unsigned short proto, __wsum sum) +{ + unsigned long tmp, tmp2; + + asm(" addcc %2,%0,%0,icc0 \n" + + /* add up the source addr */ + " ldi @(%3,0),%1 \n" + " addxcc %1,%0,%0,icc0 \n" + " ldi @(%3,4),%2 \n" + " addxcc %2,%0,%0,icc0 \n" + " ldi @(%3,8),%1 \n" + " addxcc %1,%0,%0,icc0 \n" + " ldi @(%3,12),%2 \n" + " addxcc %2,%0,%0,icc0 \n" + + /* add up the dest addr */ + " ldi @(%4,0),%1 \n" + " addxcc %1,%0,%0,icc0 \n" + " ldi @(%4,4),%2 \n" + " addxcc %2,%0,%0,icc0 \n" + " ldi @(%4,8),%1 \n" + " addxcc %1,%0,%0,icc0 \n" + " ldi @(%4,12),%2 \n" + " addxcc %2,%0,%0,icc0 \n" + + /* fold the 33-bit result into 16-bits */ + " addxcc gr0,%0,%0,icc0 \n" + " srli %0,#16,%1 \n" + " sethi #0,%0 \n" + " add %1,%0,%0 \n" + " srli %0,#16,%1 \n" + " add %1,%0,%0 \n" + + : "=r" (sum), "=&r" (tmp), "=r" (tmp2) + : "r" (saddr), "r" (daddr), "0" (sum), "2" (len + proto) + : "icc0" + ); + + return (__force __sum16)~sum; +} + +#endif /* _ASM_CHECKSUM_H */ diff --git a/arch/frv/include/asm/cpu-irqs.h b/arch/frv/include/asm/cpu-irqs.h new file mode 100644 index 0000000..478f349 --- /dev/null +++ b/arch/frv/include/asm/cpu-irqs.h @@ -0,0 +1,81 @@ +/* cpu-irqs.h: on-CPU peripheral irqs + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_CPU_IRQS_H +#define _ASM_CPU_IRQS_H + +#ifndef __ASSEMBLY__ + +/* IRQ to level mappings */ +#define IRQ_GDBSTUB_LEVEL 15 +#define IRQ_UART_LEVEL 13 + +#ifdef CONFIG_GDBSTUB_UART0 +#define IRQ_UART0_LEVEL IRQ_GDBSTUB_LEVEL +#else +#define IRQ_UART0_LEVEL IRQ_UART_LEVEL +#endif + +#ifdef CONFIG_GDBSTUB_UART1 +#define IRQ_UART1_LEVEL IRQ_GDBSTUB_LEVEL +#else +#define IRQ_UART1_LEVEL IRQ_UART_LEVEL +#endif + +#define IRQ_DMA0_LEVEL 14 +#define IRQ_DMA1_LEVEL 14 +#define IRQ_DMA2_LEVEL 14 +#define IRQ_DMA3_LEVEL 14 +#define IRQ_DMA4_LEVEL 14 +#define IRQ_DMA5_LEVEL 14 +#define IRQ_DMA6_LEVEL 14 +#define IRQ_DMA7_LEVEL 14 + +#define IRQ_TIMER0_LEVEL 12 +#define IRQ_TIMER1_LEVEL 11 +#define IRQ_TIMER2_LEVEL 10 + +#define IRQ_XIRQ0_LEVEL 1 +#define IRQ_XIRQ1_LEVEL 2 +#define IRQ_XIRQ2_LEVEL 3 +#define IRQ_XIRQ3_LEVEL 4 +#define IRQ_XIRQ4_LEVEL 5 +#define IRQ_XIRQ5_LEVEL 6 +#define IRQ_XIRQ6_LEVEL 7 +#define IRQ_XIRQ7_LEVEL 8 + +/* IRQ IDs presented to drivers */ +#define IRQ_CPU__UNUSED IRQ_BASE_CPU +#define IRQ_CPU_UART0 (IRQ_BASE_CPU + IRQ_UART0_LEVEL) +#define IRQ_CPU_UART1 (IRQ_BASE_CPU + IRQ_UART1_LEVEL) +#define IRQ_CPU_TIMER0 (IRQ_BASE_CPU + IRQ_TIMER0_LEVEL) +#define IRQ_CPU_TIMER1 (IRQ_BASE_CPU + IRQ_TIMER1_LEVEL) +#define IRQ_CPU_TIMER2 (IRQ_BASE_CPU + IRQ_TIMER2_LEVEL) +#define IRQ_CPU_DMA0 (IRQ_BASE_CPU + IRQ_DMA0_LEVEL) +#define IRQ_CPU_DMA1 (IRQ_BASE_CPU + IRQ_DMA1_LEVEL) +#define IRQ_CPU_DMA2 (IRQ_BASE_CPU + IRQ_DMA2_LEVEL) +#define IRQ_CPU_DMA3 (IRQ_BASE_CPU + IRQ_DMA3_LEVEL) +#define IRQ_CPU_DMA4 (IRQ_BASE_CPU + IRQ_DMA4_LEVEL) +#define IRQ_CPU_DMA5 (IRQ_BASE_CPU + IRQ_DMA5_LEVEL) +#define IRQ_CPU_DMA6 (IRQ_BASE_CPU + IRQ_DMA6_LEVEL) +#define IRQ_CPU_DMA7 (IRQ_BASE_CPU + IRQ_DMA7_LEVEL) +#define IRQ_CPU_EXTERNAL0 (IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL) +#define IRQ_CPU_EXTERNAL1 (IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL) +#define IRQ_CPU_EXTERNAL2 (IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL) +#define IRQ_CPU_EXTERNAL3 (IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL) +#define IRQ_CPU_EXTERNAL4 (IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL) +#define IRQ_CPU_EXTERNAL5 (IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL) +#define IRQ_CPU_EXTERNAL6 (IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL) +#define IRQ_CPU_EXTERNAL7 (IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_CPU_IRQS_H */ diff --git a/arch/frv/include/asm/cpumask.h b/arch/frv/include/asm/cpumask.h new file mode 100644 index 0000000..d999c20 --- /dev/null +++ b/arch/frv/include/asm/cpumask.h @@ -0,0 +1,6 @@ +#ifndef _ASM_CPUMASK_H +#define _ASM_CPUMASK_H + +#include + +#endif /* _ASM_CPUMASK_H */ diff --git a/arch/frv/include/asm/cputime.h b/arch/frv/include/asm/cputime.h new file mode 100644 index 0000000..f6c373a --- /dev/null +++ b/arch/frv/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef _ASM_CPUTIME_H +#define _ASM_CPUTIME_H + +#include + +#endif /* _ASM_CPUTIME_H */ diff --git a/arch/frv/include/asm/current.h b/arch/frv/include/asm/current.h new file mode 100644 index 0000000..86b0274 --- /dev/null +++ b/arch/frv/include/asm/current.h @@ -0,0 +1,30 @@ +/* current.h: FRV current task pointer + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_CURRENT_H +#define _ASM_CURRENT_H + +#ifndef __ASSEMBLY__ + +/* + * dedicate GR29 to keeping the current task pointer + */ +register struct task_struct *current asm("gr29"); + +#define get_current() current + +#else + +#define CURRENT gr29 + +#endif + +#endif /* _ASM_CURRENT_H */ diff --git a/arch/frv/include/asm/delay.h b/arch/frv/include/asm/delay.h new file mode 100644 index 0000000..597b4eb --- /dev/null +++ b/arch/frv/include/asm/delay.h @@ -0,0 +1,50 @@ +/* delay.h: FRV delay code + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_DELAY_H +#define _ASM_DELAY_H + +#include +#include + +/* + * delay loop - runs at __core_clock_speed_HZ / 2 [there are 2 insns in the loop] + */ +extern unsigned long __delay_loops_MHz; + +static inline void __delay(unsigned long loops) +{ + asm volatile("1: subicc %0,#1,%0,icc0 \n" + " bnc icc0,#2,1b \n" + : "=r" (loops) + : "0" (loops) + : "icc0" + ); +} + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ + +extern unsigned long loops_per_jiffy; + +static inline void udelay(unsigned long usecs) +{ + __delay(usecs * __delay_loops_MHz); +} + +#define ndelay(n) udelay((n) * 5) + +#endif /* _ASM_DELAY_H */ diff --git a/arch/frv/include/asm/device.h b/arch/frv/include/asm/device.h new file mode 100644 index 0000000..d8f9872 --- /dev/null +++ b/arch/frv/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + diff --git a/arch/frv/include/asm/div64.h b/arch/frv/include/asm/div64.h new file mode 100644 index 0000000..6cd978c --- /dev/null +++ b/arch/frv/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/frv/include/asm/dm9000.h b/arch/frv/include/asm/dm9000.h new file mode 100644 index 0000000..f6f48fd --- /dev/null +++ b/arch/frv/include/asm/dm9000.h @@ -0,0 +1,37 @@ +/* dm9000.h: Davicom DM9000 adapter configuration + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_DM9000_H +#define _ASM_DM9000_H + +#include + +#define DM9000_ARCH_IOBASE (__region_CS6 + 0x300) +#define DM9000_ARCH_IRQ IRQ_CPU_EXTERNAL3 /* XIRQ #3 (shared with FPGA) */ +#undef DM9000_ARCH_IRQ_ACTLOW /* IRQ pin active high */ +#define DM9000_ARCH_BUS_INFO "CS6#+0x300" /* bus info for ethtool */ + +#undef __is_PCI_IO +#define __is_PCI_IO(addr) 0 /* not PCI */ + +#undef inl +#define inl(addr) \ +({ \ + unsigned long __ioaddr = (unsigned long) addr; \ + uint32_t x = readl(__ioaddr); \ + ((x & 0xff) << 24) | ((x & 0xff00) << 8) | ((x >> 8) & 0xff00) | ((x >> 24) & 0xff); \ +}) + +#undef insl +#define insl(a,b,l) __insl(a,b,l,0) /* don't byte-swap */ + + +#endif /* _ASM_DM9000_H */ diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h new file mode 100644 index 0000000..b289887 --- /dev/null +++ b/arch/frv/include/asm/dma-mapping.h @@ -0,0 +1,174 @@ +#ifndef _ASM_DMA_MAPPING_H +#define _ASM_DMA_MAPPING_H + +#include +#include +#include +#include +#include + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +extern unsigned long __nongprelbss dma_coherent_mem_start; +extern unsigned long __nongprelbss dma_coherent_mem_end; + +void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); +void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); + +/* + * Map a single buffer of the indicated size for DMA in streaming mode. + * The 32-bit bus address to use is returned. + * + * Once the device is given the dma address, the device owns this memory + * until either pci_unmap_single or pci_dma_sync_single is performed. + */ +extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction); + +/* + * Unmap a single streaming mode DMA translation. The dma_addr and size + * must match what was provided for in a previous pci_map_single call. All + * other usages are undefined. + * + * After this call, reads by the cpu to the buffer are guarenteed to see + * whatever the device wrote there. + */ +static inline +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +/* + * Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scather-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction); + +/* + * Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +static inline +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +extern +dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction); + +static inline +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + + +static inline +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +static inline +void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +static inline +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +static inline +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +static inline +int dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if (mask < 0x00ffffff) + return 0; + + return 1; +} + +static inline +int dma_set_mask(struct device *dev, u64 mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +static inline +int dma_get_cache_alignment(void) +{ + return 1 << L1_CACHE_SHIFT; +} + +#define dma_is_consistent(d, h) (1) + +static inline +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +#endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/frv/include/asm/dma.h b/arch/frv/include/asm/dma.h new file mode 100644 index 0000000..683c47d --- /dev/null +++ b/arch/frv/include/asm/dma.h @@ -0,0 +1,125 @@ +/* dma.h: FRV DMA controller management + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +//#define DMA_DEBUG 1 + +#include + +#undef MAX_DMA_CHANNELS /* don't use kernel/dma.c */ + +/* under 2.4 this is actually needed by the new bootmem allocator */ +#define MAX_DMA_ADDRESS PAGE_OFFSET + +/* + * FRV DMA controller management + */ +typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data); + +extern void frv_dma_init(void); + +extern int frv_dma_open(const char *devname, + unsigned long dmamask, + int dmacap, + dma_irq_handler_t handler, + unsigned long irq_flags, + void *data); + +/* channels required */ +#define FRV_DMA_MASK_ANY ULONG_MAX /* any channel */ + +/* capabilities required */ +#define FRV_DMA_CAP_DREQ 0x01 /* DMA request pin */ +#define FRV_DMA_CAP_DACK 0x02 /* DMA ACK pin */ +#define FRV_DMA_CAP_DONE 0x04 /* DMA done pin */ + +extern void frv_dma_close(int dma); + +extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr); + +extern void frv_dma_start(int dma, + unsigned long sba, unsigned long dba, + unsigned long pix, unsigned long six, unsigned long bcl); + +extern void frv_dma_restart_circular(int dma, unsigned long six); + +extern void frv_dma_stop(int dma); + +extern int is_frv_dma_interrupting(int dma); + +extern void frv_dma_dump(int dma); + +extern void frv_dma_status_clear(int dma); + +#define FRV_DMA_NCHANS 8 +#define FRV_DMA_4CHANS 4 +#define FRV_DMA_8CHANS 8 + +#define DMAC_CCFRx 0x00 /* channel configuration reg */ +#define DMAC_CCFRx_CM_SHIFT 16 +#define DMAC_CCFRx_CM_DA 0x00000000 +#define DMAC_CCFRx_CM_SCA 0x00010000 +#define DMAC_CCFRx_CM_DCA 0x00020000 +#define DMAC_CCFRx_CM_2D 0x00030000 +#define DMAC_CCFRx_ATS_SHIFT 8 +#define DMAC_CCFRx_RS_INTERN 0x00000000 +#define DMAC_CCFRx_RS_EXTERN 0x00000001 +#define DMAC_CCFRx_RS_SHIFT 0 + +#define DMAC_CSTRx 0x08 /* channel status reg */ +#define DMAC_CSTRx_FS 0x0000003f +#define DMAC_CSTRx_NE 0x00000100 +#define DMAC_CSTRx_FED 0x00000200 +#define DMAC_CSTRx_WER 0x00000800 +#define DMAC_CSTRx_RER 0x00001000 +#define DMAC_CSTRx_CE 0x00002000 +#define DMAC_CSTRx_INT 0x00800000 +#define DMAC_CSTRx_BUSY 0x80000000 + +#define DMAC_CCTRx 0x10 /* channel control reg */ +#define DMAC_CCTRx_DSIZ_1 0x00000000 +#define DMAC_CCTRx_DSIZ_2 0x00000001 +#define DMAC_CCTRx_DSIZ_4 0x00000002 +#define DMAC_CCTRx_DSIZ_32 0x00000005 +#define DMAC_CCTRx_DAU_HOLD 0x00000000 +#define DMAC_CCTRx_DAU_INC 0x00000010 +#define DMAC_CCTRx_DAU_DEC 0x00000020 +#define DMAC_CCTRx_SSIZ_1 0x00000000 +#define DMAC_CCTRx_SSIZ_2 0x00000100 +#define DMAC_CCTRx_SSIZ_4 0x00000200 +#define DMAC_CCTRx_SSIZ_32 0x00000500 +#define DMAC_CCTRx_SAU_HOLD 0x00000000 +#define DMAC_CCTRx_SAU_INC 0x00001000 +#define DMAC_CCTRx_SAU_DEC 0x00002000 +#define DMAC_CCTRx_FC 0x08000000 +#define DMAC_CCTRx_ICE 0x10000000 +#define DMAC_CCTRx_IE 0x40000000 +#define DMAC_CCTRx_ACT 0x80000000 + +#define DMAC_SBAx 0x18 /* source base address reg */ +#define DMAC_DBAx 0x20 /* data base address reg */ +#define DMAC_PIXx 0x28 /* primary index reg */ +#define DMAC_SIXx 0x30 /* secondary index reg */ +#define DMAC_BCLx 0x38 /* byte count limit reg */ +#define DMAC_APRx 0x40 /* alternate pointer reg */ + +/* + * required for PCI + MODULES + */ +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ASM_DMA_H */ diff --git a/arch/frv/include/asm/elf.h b/arch/frv/include/asm/elf.h new file mode 100644 index 0000000..7279ec07d --- /dev/null +++ b/arch/frv/include/asm/elf.h @@ -0,0 +1,142 @@ +/* elf.h: FR-V ELF definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-m68knommu/elf.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_ELF_H +#define __ASM_ELF_H + +#include +#include + +struct elf32_hdr; + +/* + * ELF header e_flags defines. + */ +#define EF_FRV_GPR_MASK 0x00000003 /* mask for # of gprs */ +#define EF_FRV_GPR32 0x00000001 /* Only uses GR on 32-register */ +#define EF_FRV_GPR64 0x00000002 /* Only uses GR on 64-register */ +#define EF_FRV_FPR_MASK 0x0000000c /* mask for # of fprs */ +#define EF_FRV_FPR32 0x00000004 /* Only uses FR on 32-register */ +#define EF_FRV_FPR64 0x00000008 /* Only uses FR on 64-register */ +#define EF_FRV_FPR_NONE 0x0000000C /* Uses software floating-point */ +#define EF_FRV_DWORD_MASK 0x00000030 /* mask for dword support */ +#define EF_FRV_DWORD_YES 0x00000010 /* Assumes stack aligned to 8-byte boundaries. */ +#define EF_FRV_DWORD_NO 0x00000020 /* Assumes stack aligned to 4-byte boundaries. */ +#define EF_FRV_DOUBLE 0x00000040 /* Uses double instructions. */ +#define EF_FRV_MEDIA 0x00000080 /* Uses media instructions. */ +#define EF_FRV_PIC 0x00000100 /* Uses position independent code. */ +#define EF_FRV_NON_PIC_RELOCS 0x00000200 /* Does not use position Independent code. */ +#define EF_FRV_MULADD 0x00000400 /* -mmuladd */ +#define EF_FRV_BIGPIC 0x00000800 /* -fPIC */ +#define EF_FRV_LIBPIC 0x00001000 /* -mlibrary-pic */ +#define EF_FRV_G0 0x00002000 /* -G 0, no small data ptr */ +#define EF_FRV_NOPACK 0x00004000 /* -mnopack */ +#define EF_FRV_FDPIC 0x00008000 /* -mfdpic */ +#define EF_FRV_CPU_MASK 0xff000000 /* specific cpu bits */ +#define EF_FRV_CPU_GENERIC 0x00000000 /* Set CPU type is FR-V */ +#define EF_FRV_CPU_FR500 0x01000000 /* Set CPU type is FR500 */ +#define EF_FRV_CPU_FR300 0x02000000 /* Set CPU type is FR300 */ +#define EF_FRV_CPU_SIMPLE 0x03000000 /* SIMPLE */ +#define EF_FRV_CPU_TOMCAT 0x04000000 /* Tomcat, FR500 prototype */ +#define EF_FRV_CPU_FR400 0x05000000 /* Set CPU type is FR400 */ +#define EF_FRV_CPU_FR550 0x06000000 /* Set CPU type is FR550 */ +#define EF_FRV_CPU_FR405 0x07000000 /* Set CPU type is FR405 */ +#define EF_FRV_CPU_FR450 0x08000000 /* Set CPU type is FR450 */ + +/* + * FR-V ELF relocation types + */ + + +/* + * ELF register definitions.. + */ +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_fpmedia_regs elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +extern int elf_check_arch(const struct elf32_hdr *hdr); + +#define elf_check_fdpic(x) ((x)->e_flags & EF_FRV_FDPIC && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS)) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_FRV_PIC) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2MSB +#define ELF_ARCH EM_FRV + +#define ELF_PLAT_INIT(_r) \ +do { \ + __kernel_frame0_ptr->gr16 = 0; \ + __kernel_frame0_ptr->gr17 = 0; \ + __kernel_frame0_ptr->gr18 = 0; \ + __kernel_frame0_ptr->gr19 = 0; \ + __kernel_frame0_ptr->gr20 = 0; \ + __kernel_frame0_ptr->gr21 = 0; \ + __kernel_frame0_ptr->gr22 = 0; \ + __kernel_frame0_ptr->gr23 = 0; \ + __kernel_frame0_ptr->gr24 = 0; \ + __kernel_frame0_ptr->gr25 = 0; \ + __kernel_frame0_ptr->gr26 = 0; \ + __kernel_frame0_ptr->gr27 = 0; \ + __kernel_frame0_ptr->gr29 = 0; \ +} while(0) + +#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr) \ +do { \ + __kernel_frame0_ptr->gr16 = _exec_map_addr; \ + __kernel_frame0_ptr->gr17 = _interp_map_addr; \ + __kernel_frame0_ptr->gr18 = _dynamic_addr; \ + __kernel_frame0_ptr->gr19 = 0; \ + __kernel_frame0_ptr->gr20 = 0; \ + __kernel_frame0_ptr->gr21 = 0; \ + __kernel_frame0_ptr->gr22 = 0; \ + __kernel_frame0_ptr->gr23 = 0; \ + __kernel_frame0_ptr->gr24 = 0; \ + __kernel_frame0_ptr->gr25 = 0; \ + __kernel_frame0_ptr->gr26 = 0; \ + __kernel_frame0_ptr->gr27 = 0; \ + __kernel_frame0_ptr->gr29 = 0; \ +} while(0) + +#define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_FRV_FDPIC +#define ELF_EXEC_PAGESIZE 16384 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE 0x08000000UL + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) + +#endif diff --git a/arch/frv/include/asm/emergency-restart.h b/arch/frv/include/asm/emergency-restart.h new file mode 100644 index 0000000..108d8c4 --- /dev/null +++ b/arch/frv/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/frv/include/asm/errno.h b/arch/frv/include/asm/errno.h new file mode 100644 index 0000000..d010795 --- /dev/null +++ b/arch/frv/include/asm/errno.h @@ -0,0 +1,7 @@ +#ifndef _ASM_ERRNO_H +#define _ASM_ERRNO_H + +#include + +#endif /* _ASM_ERRNO_H */ + diff --git a/arch/frv/include/asm/fb.h b/arch/frv/include/asm/fb.h new file mode 100644 index 0000000..c7df380 --- /dev/null +++ b/arch/frv/include/asm/fb.h @@ -0,0 +1,12 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ +#include + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/frv/include/asm/fcntl.h b/arch/frv/include/asm/fcntl.h new file mode 100644 index 0000000..46ab12d --- /dev/null +++ b/arch/frv/include/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/frv/include/asm/fpu.h b/arch/frv/include/asm/fpu.h new file mode 100644 index 0000000..d73c60b --- /dev/null +++ b/arch/frv/include/asm/fpu.h @@ -0,0 +1,11 @@ +#ifndef __ASM_FPU_H +#define __ASM_FPU_H + + +/* + * MAX floating point unit state size (FSAVE/FRESTORE) + */ + +#define kernel_fpu_end() do { asm volatile("bar":::"memory"); preempt_enable(); } while(0) + +#endif /* __ASM_FPU_H */ diff --git a/arch/frv/include/asm/ftrace.h b/arch/frv/include/asm/ftrace.h new file mode 100644 index 0000000..40a8c17 --- /dev/null +++ b/arch/frv/include/asm/ftrace.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/frv/include/asm/futex.h b/arch/frv/include/asm/futex.h new file mode 100644 index 0000000..08b3d1d --- /dev/null +++ b/arch/frv/include/asm/futex.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#ifdef __KERNEL__ + +#include +#include +#include + +extern int futex_atomic_op_inuser(int encoded_op, int __user *uaddr); + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + return -ENOSYS; +} + +#endif +#endif diff --git a/arch/frv/include/asm/gdb-stub.h b/arch/frv/include/asm/gdb-stub.h new file mode 100644 index 0000000..24f9738 --- /dev/null +++ b/arch/frv/include/asm/gdb-stub.h @@ -0,0 +1,140 @@ +/* gdb-stub.h: FRV GDB stub + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_GDB_STUB_H +#define __ASM_GDB_STUB_H + +#undef GDBSTUB_DEBUG_PROTOCOL + +#include + +/* + * important register numbers in GDB protocol + * - GR0, GR1, GR2, GR3, GR4, GR5, GR6, GR7, + * - GR8, GR9, GR10, GR11, GR12, GR13, GR14, GR15, + * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23, + * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31, + * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39, + * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47, + * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55, + * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63, + * - FR0, FR1, FR2, FR3, FR4, FR5, FR6, FR7, + * - FR8, FR9, FR10, FR11, FR12, FR13, FR14, FR15, + * - FR16, FR17, FR18, FR19, FR20, FR21, FR22, FR23, + * - FR24, FR25, FR26, FR27, FR28, FR29, FR30, FR31, + * - FR32, FR33, FR34, FR35, FR36, FR37, FR38, FR39, + * - FR40, FR41, FR42, FR43, FR44, FR45, FR46, FR47, + * - FR48, FR49, FR50, FR51, FR52, FR53, FR54, FR55, + * - FR56, FR57, FR58, FR59, FR60, FR61, FR62, FR63, + * - PC, PSR, CCR, CCCR, + * - _X132, _X133, _X134 + * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3, + * - SCR0, SCR1, SCR2, SCR3, + * - LR, LCR, + * - IACC0H, IACC0L, + * - FSR0, + * - ACC0, ACC1, ACC2, ACC3, ACC4, ACC5, ACC6, ACC7, + * - ACCG0123, ACCG4567, + * - MSR0, MSR1, + * - GNER0, GNER1, + * - FNER0, FNER1, + */ +#define GDB_REG_GR(N) (N) +#define GDB_REG_FR(N) (64+(N)) +#define GDB_REG_PC 128 +#define GDB_REG_PSR 129 +#define GDB_REG_CCR 130 +#define GDB_REG_CCCR 131 +#define GDB_REG_TBR 135 +#define GDB_REG_BRR 136 +#define GDB_REG_DBAR(N) (137+(N)) +#define GDB_REG_SCR(N) (141+(N)) +#define GDB_REG_LR 145 +#define GDB_REG_LCR 146 +#define GDB_REG_FSR0 149 +#define GDB_REG_ACC(N) (150+(N)) +#define GDB_REG_ACCG(N) (158+(N)/4) +#define GDB_REG_MSR(N) (160+(N)) +#define GDB_REG_GNER(N) (162+(N)) +#define GDB_REG_FNER(N) (164+(N)) + +#define GDB_REG_SP GDB_REG_GR(1) +#define GDB_REG_FP GDB_REG_GR(2) + +#ifndef _LANGUAGE_ASSEMBLY + +/* + * Prototypes + */ +extern void show_registers_only(struct pt_regs *regs); + +extern void gdbstub_init(void); +extern void gdbstub(int type); +extern void gdbstub_exit(int status); + +extern void gdbstub_io_init(void); +extern void gdbstub_set_baud(unsigned baud); +extern int gdbstub_rx_char(unsigned char *_ch, int nonblock); +extern void gdbstub_tx_char(unsigned char ch); +extern void gdbstub_tx_flush(void); +extern void gdbstub_do_rx(void); + +extern asmlinkage void __debug_stub_init_break(void); +extern asmlinkage void __break_hijack_kernel_event(void); +extern asmlinkage void __break_hijack_kernel_event_breaks_here(void); +extern asmlinkage void start_kernel(void); + +extern asmlinkage void gdbstub_rx_handler(void); +extern asmlinkage void gdbstub_rx_irq(void); +extern asmlinkage void gdbstub_intercept(void); + +extern uint32_t __entry_usertrap_table[]; +extern uint32_t __entry_kerneltrap_table[]; + +extern volatile u8 gdbstub_rx_buffer[PAGE_SIZE]; +extern volatile u32 gdbstub_rx_inp; +extern volatile u32 gdbstub_rx_outp; +extern volatile u8 gdbstub_rx_overflow; +extern u8 gdbstub_rx_unget; + +extern void gdbstub_printk(const char *fmt, ...); +extern void debug_to_serial(const char *p, int n); +extern void console_set_baud(unsigned baud); + +#ifdef GDBSTUB_DEBUG_PROTOCOL +#define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__) +#else +#define gdbstub_proto(FMT,...) ({ 0; }) +#endif + +/* + * we dedicate GR31 to keeping a pointer to the gdbstub exception frame + * - gr31 is destroyed on entry to the gdbstub if !MMU + * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU + */ +register struct frv_frame0 *__debug_frame0 asm("gr31"); + +#define __debug_frame (&__debug_frame0->regs) +#define __debug_user_context (&__debug_frame0->uc) +#define __debug_regs (&__debug_frame0->debug) +#define __debug_reg(X) ((unsigned long *) ((unsigned long) &__debug_frame0 + (X))) + +struct frv_debug_status { + unsigned long bpsr; + unsigned long dcr; + unsigned long brr; + unsigned long nmar; +}; + +extern struct frv_debug_status __debug_status; + +#endif /* _LANGUAGE_ASSEMBLY */ +#endif /* __ASM_GDB_STUB_H */ diff --git a/arch/frv/include/asm/gpio-regs.h b/arch/frv/include/asm/gpio-regs.h new file mode 100644 index 0000000..9edf5d5 --- /dev/null +++ b/arch/frv/include/asm/gpio-regs.h @@ -0,0 +1,116 @@ +/* gpio-regs.h: on-chip general purpose I/O registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_GPIO_REGS +#define _ASM_GPIO_REGS + +#define __reg(ADDR) (*(volatile unsigned long *)(ADDR)) + +#define __get_PDR() ({ __reg(0xfeff0400); }) +#define __set_PDR(V) do { __reg(0xfeff0400) = (V); mb(); } while(0) + +#define __get_GPDR() ({ __reg(0xfeff0408); }) +#define __set_GPDR(V) do { __reg(0xfeff0408) = (V); mb(); } while(0) + +#define __get_SIR() ({ __reg(0xfeff0410); }) +#define __set_SIR(V) do { __reg(0xfeff0410) = (V); mb(); } while(0) + +#define __get_SOR() ({ __reg(0xfeff0418); }) +#define __set_SOR(V) do { __reg(0xfeff0418) = (V); mb(); } while(0) + +#define __set_PDSR(V) do { __reg(0xfeff0420) = (V); mb(); } while(0) + +#define __set_PDCR(V) do { __reg(0xfeff0428) = (V); mb(); } while(0) + +#define __get_RSTR() ({ __reg(0xfeff0500); }) +#define __set_RSTR(V) do { __reg(0xfeff0500) = (V); mb(); } while(0) + + + +/* PDR definitions */ +#define PDR_GPIO_DATA(X) (1 << (X)) + +/* GPDR definitions */ +#define GPDR_INPUT 0 +#define GPDR_OUTPUT 1 +#define GPDR_DREQ0_BIT 0x00001000 +#define GPDR_DREQ1_BIT 0x00008000 +#define GPDR_DREQ2_BIT 0x00040000 +#define GPDR_DREQ3_BIT 0x00080000 +#define GPDR_DREQ4_BIT 0x00004000 +#define GPDR_DREQ5_BIT 0x00020000 +#define GPDR_DREQ6_BIT 0x00100000 +#define GPDR_DREQ7_BIT 0x00200000 +#define GPDR_DACK0_BIT 0x00002000 +#define GPDR_DACK1_BIT 0x00010000 +#define GPDR_DACK2_BIT 0x00100000 +#define GPDR_DACK3_BIT 0x00200000 +#define GPDR_DONE0_BIT 0x00004000 +#define GPDR_DONE1_BIT 0x00020000 +#define GPDR_GPIO_DIR(X,D) ((D) << (X)) + +/* SIR definitions */ +#define SIR_GPIO_INPUT 0 +#define SIR_DREQ7_INPUT 0x00200000 +#define SIR_DREQ6_INPUT 0x00100000 +#define SIR_DREQ3_INPUT 0x00080000 +#define SIR_DREQ2_INPUT 0x00040000 +#define SIR_DREQ5_INPUT 0x00020000 +#define SIR_DREQ1_INPUT 0x00008000 +#define SIR_DREQ4_INPUT 0x00004000 +#define SIR_DREQ0_INPUT 0x00001000 +#define SIR_RXD1_INPUT 0x00000400 +#define SIR_CTS0_INPUT 0x00000100 +#define SIR_RXD0_INPUT 0x00000040 +#define SIR_GATE1_INPUT 0x00000020 +#define SIR_GATE0_INPUT 0x00000010 +#define SIR_IRQ3_INPUT 0x00000008 +#define SIR_IRQ2_INPUT 0x00000004 +#define SIR_IRQ1_INPUT 0x00000002 +#define SIR_IRQ0_INPUT 0x00000001 +#define SIR_DREQ_BITS (SIR_DREQ0_INPUT | SIR_DREQ1_INPUT | \ + SIR_DREQ2_INPUT | SIR_DREQ3_INPUT | \ + SIR_DREQ4_INPUT | SIR_DREQ5_INPUT | \ + SIR_DREQ6_INPUT | SIR_DREQ7_INPUT) + +/* SOR definitions */ +#define SOR_GPIO_OUTPUT 0 +#define SOR_DACK3_OUTPUT 0x00200000 +#define SOR_DACK2_OUTPUT 0x00100000 +#define SOR_DONE1_OUTPUT 0x00020000 +#define SOR_DACK1_OUTPUT 0x00010000 +#define SOR_DONE0_OUTPUT 0x00004000 +#define SOR_DACK0_OUTPUT 0x00002000 +#define SOR_TXD1_OUTPUT 0x00000800 +#define SOR_RTS0_OUTPUT 0x00000200 +#define SOR_TXD0_OUTPUT 0x00000080 +#define SOR_TOUT1_OUTPUT 0x00000020 +#define SOR_TOUT0_OUTPUT 0x00000010 +#define SOR_DONE_BITS (SOR_DONE0_OUTPUT | SOR_DONE1_OUTPUT) +#define SOR_DACK_BITS (SOR_DACK0_OUTPUT | SOR_DACK1_OUTPUT | \ + SOR_DACK2_OUTPUT | SOR_DACK3_OUTPUT) + +/* PDSR definitions */ +#define PDSR_UNCHANGED 0 +#define PDSR_SET_BIT(X) (1 << (X)) + +/* PDCR definitions */ +#define PDCR_UNCHANGED 0 +#define PDCR_CLEAR_BIT(X) (1 << (X)) + +/* RSTR definitions */ +/* Read Only */ +#define RSTR_POWERON 0x00000400 +#define RSTR_SOFTRESET_STATUS 0x00000100 +/* Write Only */ +#define RSTR_SOFTRESET 0x00000001 + +#endif /* _ASM_GPIO_REGS */ diff --git a/arch/frv/include/asm/hardirq.h b/arch/frv/include/asm/hardirq.h new file mode 100644 index 0000000..fc47515 --- /dev/null +++ b/arch/frv/include/asm/hardirq.h @@ -0,0 +1,35 @@ +/* hardirq.h: FRV hardware IRQ management + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __ASM_HARDIRQ_H +#define __ASM_HARDIRQ_H + +#include +#include + +typedef struct { + unsigned int __softirq_pending; + unsigned long idle_timestamp; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#ifdef CONFIG_SMP +#error SMP not available on FR-V +#endif /* CONFIG_SMP */ + +extern atomic_t irq_err_count; +static inline void ack_bad_irq(int irq) +{ + atomic_inc(&irq_err_count); +} + +#endif diff --git a/arch/frv/include/asm/highmem.h b/arch/frv/include/asm/highmem.h new file mode 100644 index 0000000..68e4677 --- /dev/null +++ b/arch/frv/include/asm/highmem.h @@ -0,0 +1,182 @@ +/* highmem.h: virtual kernel memory mappings for high memory + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-i386/highmem.h + * + * See Documentation/frv/mmu-layout.txt for more information. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +#define NR_TLB_LINES 64 /* number of lines in the TLB */ + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +#ifdef CONFIG_DEBUG_HIGHMEM +#define HIGHMEM_DEBUG 1 +#else +#define HIGHMEM_DEBUG 0 +#endif + +/* declarations for highmem.c */ +extern unsigned long highstart_pfn, highend_pfn; + +#define kmap_prot PAGE_KERNEL +#define kmap_pte ______kmap_pte_in_TLB +extern pte_t *pkmap_page_table; + +#define flush_cache_kmaps() do { } while (0) + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define LAST_PKMAP PTRS_PER_PTE +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +extern void *kmap(struct page *page); +extern void kunmap(struct page *page); + +extern struct page *kmap_atomic_to_page(void *ptr); + +#endif /* !__ASSEMBLY__ */ + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +#define KMAP_ATOMIC_CACHE_DAMR 8 + +#ifndef __ASSEMBLY__ + +#define __kmap_atomic_primary(type, paddr, ampr) \ +({ \ + unsigned long damlr, dampr; \ + \ + dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \ + \ + if (type != __KM_CACHE) \ + asm volatile("movgs %0,dampr"#ampr :: "r"(dampr) : "memory"); \ + else \ + asm volatile("movgs %0,iampr"#ampr"\n" \ + "movgs %0,dampr"#ampr"\n" \ + :: "r"(dampr) : "memory" \ + ); \ + \ + asm("movsg damlr"#ampr",%0" : "=r"(damlr)); \ + \ + /*printk("DAMR"#ampr": PRIM sl=%d L=%08lx P=%08lx\n", type, damlr, dampr);*/ \ + \ + (void *) damlr; \ +}) + +#define __kmap_atomic_secondary(slot, paddr) \ +({ \ + unsigned long damlr = KMAP_ATOMIC_SECONDARY_FRAME + (slot) * PAGE_SIZE; \ + unsigned long dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \ + \ + asm volatile("movgs %0,tplr \n" \ + "movgs %1,tppr \n" \ + "tlbpr %0,gr0,#2,#1" \ + : : "r"(damlr), "r"(dampr) : "memory"); \ + \ + /*printk("TLB: SECN sl=%d L=%08lx P=%08lx\n", slot, damlr, dampr);*/ \ + \ + (void *) damlr; \ +}) + +static inline void *kmap_atomic(struct page *page, enum km_type type) +{ + unsigned long paddr; + + pagefault_disable(); + debug_kmap_atomic(type); + paddr = page_to_phys(page); + + switch (type) { + case 0: return __kmap_atomic_primary(0, paddr, 2); + case 1: return __kmap_atomic_primary(1, paddr, 3); + case 2: return __kmap_atomic_primary(2, paddr, 4); + case 3: return __kmap_atomic_primary(3, paddr, 5); + case 4: return __kmap_atomic_primary(4, paddr, 6); + case 5: return __kmap_atomic_primary(5, paddr, 7); + case 6: return __kmap_atomic_primary(6, paddr, 8); + case 7: return __kmap_atomic_primary(7, paddr, 9); + case 8: return __kmap_atomic_primary(8, paddr, 10); + + case 9 ... 9 + NR_TLB_LINES - 1: + return __kmap_atomic_secondary(type - 9, paddr); + + default: + BUG(); + return NULL; + } +} + +#define __kunmap_atomic_primary(type, ampr) \ +do { \ + asm volatile("movgs gr0,dampr"#ampr"\n" ::: "memory"); \ + if (type == __KM_CACHE) \ + asm volatile("movgs gr0,iampr"#ampr"\n" ::: "memory"); \ +} while(0) + +#define __kunmap_atomic_secondary(slot, vaddr) \ +do { \ + asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr) : "memory"); \ +} while(0) + +static inline void kunmap_atomic(void *kvaddr, enum km_type type) +{ + switch (type) { + case 0: __kunmap_atomic_primary(0, 2); break; + case 1: __kunmap_atomic_primary(1, 3); break; + case 2: __kunmap_atomic_primary(2, 4); break; + case 3: __kunmap_atomic_primary(3, 5); break; + case 4: __kunmap_atomic_primary(4, 6); break; + case 5: __kunmap_atomic_primary(5, 7); break; + case 6: __kunmap_atomic_primary(6, 8); break; + case 7: __kunmap_atomic_primary(7, 9); break; + case 8: __kunmap_atomic_primary(8, 10); break; + + case 9 ... 9 + NR_TLB_LINES - 1: + __kunmap_atomic_secondary(type - 9, kvaddr); + break; + + default: + BUG(); + } + pagefault_enable(); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/frv/include/asm/hw_irq.h b/arch/frv/include/asm/hw_irq.h new file mode 100644 index 0000000..522ad37 --- /dev/null +++ b/arch/frv/include/asm/hw_irq.h @@ -0,0 +1,16 @@ +/* hw_irq.h: FR-V specific h/w IRQ stuff + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_HW_IRQ_H +#define _ASM_HW_IRQ_H + + +#endif /* _ASM_HW_IRQ_H */ diff --git a/arch/frv/include/asm/init.h b/arch/frv/include/asm/init.h new file mode 100644 index 0000000..8b15838 --- /dev/null +++ b/arch/frv/include/asm/init.h @@ -0,0 +1,12 @@ +#ifndef _ASM_INIT_H +#define _ASM_INIT_H + +#define __init __attribute__ ((__section__ (".text.init"))) +#define __initdata __attribute__ ((__section__ (".data.init"))) +/* For assembly routines */ +#define __INIT .section ".text.init",#alloc,#execinstr +#define __FINIT .previous +#define __INITDATA .section ".data.init",#alloc,#write + +#endif + diff --git a/arch/frv/include/asm/io.h b/arch/frv/include/asm/io.h new file mode 100644 index 0000000..ca7475e --- /dev/null +++ b/arch/frv/include/asm/io.h @@ -0,0 +1,392 @@ +/* io.h: FRV I/O operations + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This gets interesting when talking to the PCI bus - the CPU is in big endian + * mode, the PCI bus is little endian and the hardware in the middle can do + * byte swapping + */ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +/* + * swap functions are sometimes needed to interface little-endian hardware + */ + +static inline unsigned short _swapw(unsigned short v) +{ + return ((v << 8) | (v >> 8)); +} + +static inline unsigned long _swapl(unsigned long v) +{ + return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); +} + +//#define __iormb() asm volatile("membar") +//#define __iowmb() asm volatile("membar") + +#define __raw_readb __builtin_read8 +#define __raw_readw __builtin_read16 +#define __raw_readl __builtin_read32 + +#define __raw_writeb(datum, addr) __builtin_write8(addr, datum) +#define __raw_writew(datum, addr) __builtin_write16(addr, datum) +#define __raw_writel(datum, addr) __builtin_write32(addr, datum) + +static inline void io_outsb(unsigned int addr, const void *buf, int len) +{ + unsigned long __ioaddr = (unsigned long) addr; + const uint8_t *bp = buf; + + while (len--) + __builtin_write8((volatile void __iomem *) __ioaddr, *bp++); +} + +static inline void io_outsw(unsigned int addr, const void *buf, int len) +{ + unsigned long __ioaddr = (unsigned long) addr; + const uint16_t *bp = buf; + + while (len--) + __builtin_write16((volatile void __iomem *) __ioaddr, (*bp++)); +} + +extern void __outsl_ns(unsigned int addr, const void *buf, int len); +extern void __outsl_sw(unsigned int addr, const void *buf, int len); +static inline void __outsl(unsigned int addr, const void *buf, int len, int swap) +{ + unsigned long __ioaddr = (unsigned long) addr; + + if (!swap) + __outsl_ns(__ioaddr, buf, len); + else + __outsl_sw(__ioaddr, buf, len); +} + +static inline void io_insb(unsigned long addr, void *buf, int len) +{ + uint8_t *bp = buf; + + while (len--) + *bp++ = __builtin_read8((volatile void __iomem *) addr); +} + +static inline void io_insw(unsigned long addr, void *buf, int len) +{ + uint16_t *bp = buf; + + while (len--) + *bp++ = __builtin_read16((volatile void __iomem *) addr); +} + +extern void __insl_ns(unsigned long addr, void *buf, int len); +extern void __insl_sw(unsigned long addr, void *buf, int len); +static inline void __insl(unsigned long addr, void *buf, int len, int swap) +{ + if (!swap) + __insl_ns(addr, buf, len); + else + __insl_sw(addr, buf, len); +} + +#define mmiowb() mb() + +/* + * make the short names macros so specific devices + * can override them as required + */ + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} + +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + memcpy(dst, (void __force *) src, count); +} + +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + memcpy((void __force *) dst, src, count); +} + +static inline uint8_t inb(unsigned long addr) +{ + return __builtin_read8((void __iomem *)addr); +} + +static inline uint16_t inw(unsigned long addr) +{ + uint16_t ret = __builtin_read16((void __iomem *)addr); + + if (__is_PCI_IO(addr)) + ret = _swapw(ret); + + return ret; +} + +static inline uint32_t inl(unsigned long addr) +{ + uint32_t ret = __builtin_read32((void __iomem *)addr); + + if (__is_PCI_IO(addr)) + ret = _swapl(ret); + + return ret; +} + +static inline void outb(uint8_t datum, unsigned long addr) +{ + __builtin_write8((void __iomem *)addr, datum); +} + +static inline void outw(uint16_t datum, unsigned long addr) +{ + if (__is_PCI_IO(addr)) + datum = _swapw(datum); + __builtin_write16((void __iomem *)addr, datum); +} + +static inline void outl(uint32_t datum, unsigned long addr) +{ + if (__is_PCI_IO(addr)) + datum = _swapl(datum); + __builtin_write32((void __iomem *)addr, datum); +} + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) + +#define outsb(a,b,l) io_outsb(a,b,l) +#define outsw(a,b,l) io_outsw(a,b,l) +#define outsl(a,b,l) __outsl(a,b,l,0) + +#define insb(a,b,l) io_insb(a,b,l) +#define insw(a,b,l) io_insw(a,b,l) +#define insl(a,b,l) __insl(a,b,l,0) + +#define IO_SPACE_LIMIT 0xffffffff + +static inline uint8_t readb(const volatile void __iomem *addr) +{ + return __builtin_read8((__force void volatile __iomem *) addr); +} + +static inline uint16_t readw(const volatile void __iomem *addr) +{ + uint16_t ret = __builtin_read16((__force void volatile __iomem *)addr); + + if (__is_PCI_MEM(addr)) + ret = _swapw(ret); + return ret; +} + +static inline uint32_t readl(const volatile void __iomem *addr) +{ + uint32_t ret = __builtin_read32((__force void volatile __iomem *)addr); + + if (__is_PCI_MEM(addr)) + ret = _swapl(ret); + + return ret; +} + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl + +static inline void writeb(uint8_t datum, volatile void __iomem *addr) +{ + __builtin_write8(addr, datum); + if (__is_PCI_MEM(addr)) + __flush_PCI_writes(); +} + +static inline void writew(uint16_t datum, volatile void __iomem *addr) +{ + if (__is_PCI_MEM(addr)) + datum = _swapw(datum); + + __builtin_write16(addr, datum); + if (__is_PCI_MEM(addr)) + __flush_PCI_writes(); +} + +static inline void writel(uint32_t datum, volatile void __iomem *addr) +{ + if (__is_PCI_MEM(addr)) + datum = _swapl(datum); + + __builtin_write32(addr, datum); + if (__is_PCI_MEM(addr)) + __flush_PCI_writes(); +} + + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); + +static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} + +static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +#define ioremap_wc ioremap_nocache + +extern void iounmap(void volatile __iomem *addr); + +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return (void __iomem *) port; +} + +static inline void ioport_unmap(void __iomem *p) +{ +} + +static inline void flush_write_buffers(void) +{ + __asm__ __volatile__ ("membar" : : :"memory"); +} + +/* + * do appropriate I/O accesses for token type + */ +static inline unsigned int ioread8(void __iomem *p) +{ + return __builtin_read8(p); +} + +static inline unsigned int ioread16(void __iomem *p) +{ + uint16_t ret = __builtin_read16(p); + if (__is_PCI_addr(p)) + ret = _swapw(ret); + return ret; +} + +static inline unsigned int ioread32(void __iomem *p) +{ + uint32_t ret = __builtin_read32(p); + if (__is_PCI_addr(p)) + ret = _swapl(ret); + return ret; +} + +static inline void iowrite8(u8 val, void __iomem *p) +{ + __builtin_write8(p, val); + if (__is_PCI_MEM(p)) + __flush_PCI_writes(); +} + +static inline void iowrite16(u16 val, void __iomem *p) +{ + if (__is_PCI_addr(p)) + val = _swapw(val); + __builtin_write16(p, val); + if (__is_PCI_MEM(p)) + __flush_PCI_writes(); +} + +static inline void iowrite32(u32 val, void __iomem *p) +{ + if (__is_PCI_addr(p)) + val = _swapl(val); + __builtin_write32(p, val); + if (__is_PCI_MEM(p)) + __flush_PCI_writes(); +} + +static inline void ioread8_rep(void __iomem *p, void *dst, unsigned long count) +{ + io_insb((unsigned long) p, dst, count); +} + +static inline void ioread16_rep(void __iomem *p, void *dst, unsigned long count) +{ + io_insw((unsigned long) p, dst, count); +} + +static inline void ioread32_rep(void __iomem *p, void *dst, unsigned long count) +{ + __insl_ns((unsigned long) p, dst, count); +} + +static inline void iowrite8_rep(void __iomem *p, const void *src, unsigned long count) +{ + io_outsb((unsigned long) p, src, count); +} + +static inline void iowrite16_rep(void __iomem *p, const void *src, unsigned long count) +{ + io_outsw((unsigned long) p, src, count); +} + +static inline void iowrite32_rep(void __iomem *p, const void *src, unsigned long count) +{ + __outsl_ns((unsigned long) p, src, count); +} + +/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ +struct pci_dev; +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) +{ +} + + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _ASM_IO_H */ diff --git a/arch/frv/include/asm/ioctl.h b/arch/frv/include/asm/ioctl.h new file mode 100644 index 0000000..b279fe0 --- /dev/null +++ b/arch/frv/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/frv/include/asm/ioctls.h b/arch/frv/include/asm/ioctls.h new file mode 100644 index 0000000..d0c30e3 --- /dev/null +++ b/arch/frv/include/asm/ioctls.h @@ -0,0 +1,86 @@ +#ifndef __ASM_IOCTLS_H__ +#define __ASM_IOCTLS_H__ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __ASM_IOCTLS_H__ */ + diff --git a/arch/frv/include/asm/ipcbuf.h b/arch/frv/include/asm/ipcbuf.h new file mode 100644 index 0000000..b546f67 --- /dev/null +++ b/arch/frv/include/asm/ipcbuf.h @@ -0,0 +1,30 @@ +#ifndef __ASM_IPCBUF_H__ +#define __ASM_IPCBUF_H__ + +/* + * The user_ipc_perm structure for FR-V architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __ASM_IPCBUF_H__ */ + diff --git a/arch/frv/include/asm/irc-regs.h b/arch/frv/include/asm/irc-regs.h new file mode 100644 index 0000000..afa30ae --- /dev/null +++ b/arch/frv/include/asm/irc-regs.h @@ -0,0 +1,53 @@ +/* irc-regs.h: on-chip interrupt controller registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_IRC_REGS +#define _ASM_IRC_REGS + +#define __reg(ADDR) (*(volatile unsigned long *)(ADDR)) + +#define __get_TM0() ({ __reg(0xfeff9800); }) +#define __get_TM1() ({ __reg(0xfeff9808); }) +#define __set_TM1(V) do { __reg(0xfeff9808) = (V); mb(); } while(0) + +#define __set_TM1x(XI,V) \ +do { \ + int shift = (XI) * 2 + 16; \ + unsigned long tm1 = __reg(0xfeff9808); \ + tm1 &= ~(0x3 << shift); \ + tm1 |= (V) << shift; \ + __reg(0xfeff9808) = tm1; \ + mb(); \ +} while(0) + +#define __get_RS(C) ({ (__reg(0xfeff9810) >> ((C)+16)) & 1; }) + +#define __clr_RC(C) do { __reg(0xfeff9818) = 1 << ((C)+16); mb(); } while(0) + +#define __get_MASK(C) ({ (__reg(0xfeff9820) >> ((C)+16)) & 1; }) +#define __set_MASK(C) do { __reg(0xfeff9820) |= 1 << ((C)+16); mb(); } while(0) +#define __clr_MASK(C) do { __reg(0xfeff9820) &= ~(1 << ((C)+16)); mb(); } while(0) + +#define __get_MASK_all() __get_MASK(0) +#define __set_MASK_all() __set_MASK(0) +#define __clr_MASK_all() __clr_MASK(0) + +#define __get_IRL() ({ (__reg(0xfeff9828) >> 16) & 0xf; }) +#define __clr_IRL() do { __reg(0xfeff9828) = 0x100000; mb(); } while(0) + +#define __get_IRR(N) ({ __reg(0xfeff9840 + (N) * 8); }) +#define __set_IRR(N,V) do { __reg(0xfeff9840 + (N) * 8) = (V); } while(0) + +#define __get_IITMR(N) ({ __reg(0xfeff9880 + (N) * 8); }) +#define __set_IITMR(N,V) do { __reg(0xfeff9880 + (N) * 8) = (V); } while(0) + + +#endif /* _ASM_IRC_REGS */ diff --git a/arch/frv/include/asm/irq.h b/arch/frv/include/asm/irq.h new file mode 100644 index 0000000..3a66ebd --- /dev/null +++ b/arch/frv/include/asm/irq.h @@ -0,0 +1,30 @@ +/* irq.h: FRV IRQ definitions + * + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_IRQ_H_ +#define _ASM_IRQ_H_ + +#define NR_IRQS 48 +#define IRQ_BASE_CPU (0 * 16) +#define IRQ_BASE_FPGA (1 * 16) +#define IRQ_BASE_MB93493 (2 * 16) + +/* probe returns a 32-bit IRQ mask:-/ */ +#define MIN_PROBE_IRQ (NR_IRQS - 32) + +#ifndef __ASSEMBLY__ +static inline int irq_canonicalize(int irq) +{ + return irq; +} +#endif + +#endif /* _ASM_IRQ_H_ */ diff --git a/arch/frv/include/asm/irq_regs.h b/arch/frv/include/asm/irq_regs.h new file mode 100644 index 0000000..d22e832 --- /dev/null +++ b/arch/frv/include/asm/irq_regs.h @@ -0,0 +1,27 @@ +/* FRV per-CPU frame pointer holder + * + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_IRQ_REGS_H +#define _ASM_IRQ_REGS_H + +/* + * Per-cpu current frame pointer - the location of the last exception frame on + * the stack + * - on FRV, GR28 is dedicated to keeping a pointer to the current exception + * frame + */ +#define ARCH_HAS_OWN_IRQ_REGS + +#ifndef __ASSEMBLY__ +#define get_irq_regs() (__frame) +#endif + +#endif /* _ASM_IRQ_REGS_H */ diff --git a/arch/frv/include/asm/kdebug.h b/arch/frv/include/asm/kdebug.h new file mode 100644 index 0000000..6ece1b0 --- /dev/null +++ b/arch/frv/include/asm/kdebug.h @@ -0,0 +1 @@ +#include diff --git a/arch/frv/include/asm/kmap_types.h b/arch/frv/include/asm/kmap_types.h new file mode 100644 index 0000000..f8e16b2 --- /dev/null +++ b/arch/frv/include/asm/kmap_types.h @@ -0,0 +1,29 @@ + +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +enum km_type { + /* arch specific kmaps - change the numbers attached to these at your peril */ + __KM_CACHE, /* cache flush page attachment point */ + __KM_PGD, /* current page directory */ + __KM_ITLB_PTD, /* current instruction TLB miss page table lookup */ + __KM_DTLB_PTD, /* current data TLB miss page table lookup */ + + /* general kmaps */ + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/arch/frv/include/asm/linkage.h b/arch/frv/include/asm/linkage.h new file mode 100644 index 0000000..636c1bc --- /dev/null +++ b/arch/frv/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .align 4 +#define __ALIGN_STR ".align 4" + +#endif diff --git a/arch/frv/include/asm/local.h b/arch/frv/include/asm/local.h new file mode 100644 index 0000000..c27bdf0 --- /dev/null +++ b/arch/frv/include/asm/local.h @@ -0,0 +1,6 @@ +#ifndef _ASM_LOCAL_H +#define _ASM_LOCAL_H + +#include + +#endif /* _ASM_LOCAL_H */ diff --git a/arch/frv/include/asm/math-emu.h b/arch/frv/include/asm/math-emu.h new file mode 100644 index 0000000..0c8f731 --- /dev/null +++ b/arch/frv/include/asm/math-emu.h @@ -0,0 +1,301 @@ +#ifndef _ASM_MATH_EMU_H +#define _ASM_MATH_EMU_H + +#include +#include + +/* Status Register bits */ + +/* accrued exception bits */ +#define FPSR_AEXC_INEX 3 +#define FPSR_AEXC_DZ 4 +#define FPSR_AEXC_UNFL 5 +#define FPSR_AEXC_OVFL 6 +#define FPSR_AEXC_IOP 7 + +/* exception status bits */ +#define FPSR_EXC_INEX1 8 +#define FPSR_EXC_INEX2 9 +#define FPSR_EXC_DZ 10 +#define FPSR_EXC_UNFL 11 +#define FPSR_EXC_OVFL 12 +#define FPSR_EXC_OPERR 13 +#define FPSR_EXC_SNAN 14 +#define FPSR_EXC_BSUN 15 + +/* quotient byte, assumes big-endian, of course */ +#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1)) + +/* condition code bits */ +#define FPSR_CC_NAN 24 +#define FPSR_CC_INF 25 +#define FPSR_CC_Z 26 +#define FPSR_CC_NEG 27 + + +/* Control register bits */ + +/* rounding mode */ +#define FPCR_ROUND_RN 0 /* round to nearest/even */ +#define FPCR_ROUND_RZ 1 /* round to zero */ +#define FPCR_ROUND_RM 2 /* minus infinity */ +#define FPCR_ROUND_RP 3 /* plus infinity */ + +/* rounding precision */ +#define FPCR_PRECISION_X 0 /* long double */ +#define FPCR_PRECISION_S 1 /* double */ +#define FPCR_PRECISION_D 2 /* float */ + + +/* Flags to select the debugging output */ +#define PDECODE 0 +#define PEXECUTE 1 +#define PCONV 2 +#define PNORM 3 +#define PREGISTER 4 +#define PINSTR 5 +#define PUNIMPL 6 +#define PMOVEM 7 + +#define PMDECODE (1< +#include + +union fp_mant64 { + unsigned long long m64; + unsigned long m32[2]; +}; + +union fp_mant128 { + unsigned long long m64[2]; + unsigned long m32[4]; +}; + +/* internal representation of extended fp numbers */ +struct fp_ext { + unsigned char lowmant; + unsigned char sign; + unsigned short exp; + union fp_mant64 mant; +}; + +/* C representation of FPU registers */ +/* NOTE: if you change this, you have to change the assembler offsets + below and the size in , too */ +struct fp_data { + struct fp_ext fpreg[8]; + unsigned int fpcr; + unsigned int fpsr; + unsigned int fpiar; + unsigned short prec; + unsigned short rnd; + struct fp_ext temp[2]; +}; + +#if FPU_EMU_DEBUG +extern unsigned int fp_debugprint; + +#define dprint(bit, fmt, args...) ({ \ + if (fp_debugprint & (1 << (bit))) \ + printk(fmt, ## args); \ +}) +#else +#define dprint(bit, fmt, args...) +#endif + +#define uprint(str) ({ \ + static int __count = 3; \ + \ + if (__count > 0) { \ + printk("You just hit an unimplemented " \ + "fpu instruction (%s)\n", str); \ + printk("Please report this to ....\n"); \ + __count--; \ + } \ +}) + +#define FPDATA ((struct fp_data *)current->thread.fp) + +#else /* __ASSEMBLY__ */ + +#define FPDATA %a2 + +/* offsets from the base register to the floating point data in the task struct */ +#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0) +#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96) +#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100) +#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104) +#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108) +#define FPD_RND (TASK_THREAD+THREAD_FPREG+110) +#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112) +#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124) +#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136) + +/* offsets on the stack to access saved registers, + * these are only used during instruction decoding + * where we always know how deep we're on the stack. + */ +#define FPS_DO (PT_D0) +#define FPS_D1 (PT_D1) +#define FPS_D2 (PT_D2) +#define FPS_A0 (PT_A0) +#define FPS_A1 (PT_A1) +#define FPS_A2 (PT_A2) +#define FPS_SR (PT_SR) +#define FPS_PC (PT_PC) +#define FPS_EA (PT_PC+6) +#define FPS_PC2 (PT_PC+10) + +.macro fp_get_fp_reg + lea (FPD_FPREG,FPDATA,%d0.w*4),%a0 + lea (%a0,%d0.w*8),%a0 +.endm + +/* Macros used to get/put the current program counter. + * 020/030 use a different stack frame then 040/060, for the + * 040/060 the return pc points already to the next location, + * so this only needs to be modified for jump instructions. + */ +.macro fp_get_pc dest + move.l (FPS_PC+4,%sp),\dest +.endm + +.macro fp_put_pc src,jump=0 + move.l \src,(FPS_PC+4,%sp) +.endm + +.macro fp_get_instr_data f,s,dest,label + getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4) + addq.l #\s,%sp@(FPS_PC+4) +.endm + +.macro fp_get_instr_word dest,label,addr + fp_get_instr_data w,2,\dest,\label,\addr +.endm + +.macro fp_get_instr_long dest,label,addr + fp_get_instr_data l,4,\dest,\label,\addr +.endm + +/* These macros are used to read from/write to user space + * on error we jump to the fixup section, load the fault + * address into %a0 and jump to the exit. + * (derived from ) + */ +.macro getuser size,src,dest,label,addr +| printf ,"[\size<%08x]",1,\addr +.Lu1\@: moves\size \src,\dest + + .section .fixup,"ax" + .even +.Lu2\@: move.l \addr,%a0 + jra \label + .previous + + .section __ex_table,"a" + .align 4 + .long .Lu1\@,.Lu2\@ + .previous +.endm + +.macro putuser size,src,dest,label,addr +| printf ,"[\size>%08x]",1,\addr +.Lu1\@: moves\size \src,\dest +.Lu2\@: + + .section .fixup,"ax" + .even +.Lu3\@: move.l \addr,%a0 + jra \label + .previous + + .section __ex_table,"a" + .align 4 + .long .Lu1\@,.Lu3\@ + .long .Lu2\@,.Lu3\@ + .previous +.endm + + +.macro movestack nr,arg1,arg2,arg3,arg4,arg5 + .if \nr + movestack (\nr-1),\arg2,\arg3,\arg4,\arg5 + move.l \arg1,-(%sp) + .endif +.endm + +.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5 +#ifdef FPU_EMU_DEBUG + .data +.Lpdata\@: + .string "\string" + .previous + + movem.l %d0/%d1/%a0/%a1,-(%sp) + .if \bit+1 +#if 0 + moveq #\bit,%d0 + andw #7,%d0 + btst %d0,fp_debugprint+((31-\bit)/8) +#else + btst #\bit,fp_debugprint+((31-\bit)/8) +#endif + jeq .Lpskip\@ + .endif + movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5 + pea .Lpdata\@ + jsr printk + lea ((\nr+1)*4,%sp),%sp +.Lpskip\@: + movem.l (%sp)+,%d0/%d1/%a0/%a1 +#endif +.endm + +.macro printx bit,fp +#ifdef FPU_EMU_DEBUG + movem.l %d0/%a0,-(%sp) + lea \fp,%a0 +#if 0 + moveq #'+',%d0 + tst.w (%a0) + jeq .Lx1\@ + moveq #'-',%d0 +.Lx1\@: printf \bit," %c",1,%d0 + move.l (4,%a0),%d0 + bclr #31,%d0 + jne .Lx2\@ + printf \bit,"0." + jra .Lx3\@ +.Lx2\@: printf \bit,"1." +.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8) + move.w (2,%a0),%d0 + ext.l %d0 + printf \bit,"E%04x",1,%d0 +#else + printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8) +#endif + movem.l (%sp)+,%d0/%a0 +#endif +.endm + +.macro debug instr,args +#ifdef FPU_EMU_DEBUG + \instr \args +#endif +.endm + + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_FRV_MATH_EMU_H */ + diff --git a/arch/frv/include/asm/mb-regs.h b/arch/frv/include/asm/mb-regs.h new file mode 100644 index 0000000..219e5f9 --- /dev/null +++ b/arch/frv/include/asm/mb-regs.h @@ -0,0 +1,200 @@ +/* mb-regs.h: motherboard registers + * + * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB_REGS_H +#define _ASM_MB_REGS_H + +#include +#include +#include + +#ifndef __ASSEMBLY__ +/* gcc builtins, annotated */ + +unsigned long __builtin_read8(volatile void __iomem *); +unsigned long __builtin_read16(volatile void __iomem *); +unsigned long __builtin_read32(volatile void __iomem *); +void __builtin_write8(volatile void __iomem *, unsigned char); +void __builtin_write16(volatile void __iomem *, unsigned short); +void __builtin_write32(volatile void __iomem *, unsigned long); +#endif + +#define __region_IO KERNEL_IO_START /* the region from 0xe0000000 to 0xffffffff has suitable + * protection laid over the top for use in memory-mapped + * I/O + */ + +#define __region_CS0 0xff000000 /* Boot ROMs area */ + +#ifdef CONFIG_MB93091_VDK +/* + * VDK motherboard and CPU card specific stuff + */ + +#include + +#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0 +#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1 + +#define __region_CS2 0xe0000000 /* SLBUS/PCI I/O space */ +#define __region_CS2_M 0x0fffffff /* mask */ +#define __region_CS2_C 0x00000000 /* control */ +#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */ +#define __region_CS5_M 0x00ffffff +#define __region_CS5_C 0x00010000 +#define __region_CS7 0xf1000000 /* CB70 CPU-card PCMCIA port I/O space */ +#define __region_CS7_M 0x00ffffff +#define __region_CS7_C 0x00410701 +#define __region_CS1 0xfc000000 /* SLBUS/PCI bridge control registers */ +#define __region_CS1_M 0x000fffff +#define __region_CS1_C 0x00000000 +#define __region_CS6 0xfc100000 /* CB70 CPU-card DM9000 LAN I/O space */ +#define __region_CS6_M 0x000fffff +#define __region_CS6_C 0x00400707 +#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */ +#define __region_CS3_M 0x000fffff +#define __region_CS3_C 0xc8100000 +#define __region_CS4 0xfd000000 /* CB70 CPU-card extra flash space */ +#define __region_CS4_M 0x00ffffff +#define __region_CS4_C 0x00000f07 + +#define __region_PCI_IO (__region_CS2 + 0x04000000UL) +#define __region_PCI_MEM (__region_CS2 + 0x08000000UL) +#define __flush_PCI_writes() \ +do { \ + __builtin_write8((volatile void __iomem *) __region_PCI_MEM, 0); \ +} while(0) + +#define __is_PCI_IO(addr) \ + (((unsigned long)(addr) >> 24) - (__region_PCI_IO >> 24) < (0x04000000UL >> 24)) + +#define __is_PCI_MEM(addr) \ + ((unsigned long)(addr) - __region_PCI_MEM < 0x08000000UL) + +#define __is_PCI_addr(addr) \ + ((unsigned long)(addr) - __region_PCI_IO < 0x0c000000UL) + +#define __get_CLKSW() ({ *(volatile unsigned long *)(__region_CS2 + 0x0130000cUL) & 0xffUL; }) +#define __get_CLKIN() (__get_CLKSW() * 125U * 100000U / 24U) + +#ifndef __ASSEMBLY__ +extern int __nongprelbss mb93090_mb00_detected; +#endif + +#define __addr_LEDS() (__region_CS2 + 0x01200004UL) +#ifdef CONFIG_MB93090_MB00 +#define __set_LEDS(X) \ +do { \ + if (mb93090_mb00_detected) \ + __builtin_write32((void __iomem *) __addr_LEDS(), ~(X)); \ +} while (0) +#else +#define __set_LEDS(X) +#endif + +#define __addr_LCD() (__region_CS2 + 0x01200008UL) +#define __get_LCD(B) __builtin_read32((volatile void __iomem *) (B)) +#define __set_LCD(B,X) __builtin_write32((volatile void __iomem *) (B), (X)) + +#define LCD_D 0x000000ff /* LCD data bus */ +#define LCD_RW 0x00000100 /* LCD R/W signal */ +#define LCD_RS 0x00000200 /* LCD Register Select */ +#define LCD_E 0x00000400 /* LCD Start Enable Signal */ + +#define LCD_CMD_CLEAR (LCD_E|0x001) +#define LCD_CMD_HOME (LCD_E|0x002) +#define LCD_CMD_CURSOR_INC (LCD_E|0x004) +#define LCD_CMD_SCROLL_INC (LCD_E|0x005) +#define LCD_CMD_CURSOR_DEC (LCD_E|0x006) +#define LCD_CMD_SCROLL_DEC (LCD_E|0x007) +#define LCD_CMD_OFF (LCD_E|0x008) +#define LCD_CMD_ON(CRSR,BLINK) (LCD_E|0x00c|(CRSR<<1)|BLINK) +#define LCD_CMD_CURSOR_MOVE_L (LCD_E|0x010) +#define LCD_CMD_CURSOR_MOVE_R (LCD_E|0x014) +#define LCD_CMD_DISPLAY_SHIFT_L (LCD_E|0x018) +#define LCD_CMD_DISPLAY_SHIFT_R (LCD_E|0x01c) +#define LCD_CMD_FUNCSET(DL,N,F) (LCD_E|0x020|(DL<<4)|(N<<3)|(F<<2)) +#define LCD_CMD_SET_CG_ADDR(X) (LCD_E|0x040|X) +#define LCD_CMD_SET_DD_ADDR(X) (LCD_E|0x080|X) +#define LCD_CMD_READ_BUSY (LCD_E|LCD_RW) +#define LCD_DATA_WRITE(X) (LCD_E|LCD_RS|(X)) +#define LCD_DATA_READ (LCD_E|LCD_RS|LCD_RW) + +#else +/* + * PDK unit specific stuff + */ + +#include + +#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0 +#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1 + +#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */ +#define __region_CS5_M 0x00ffffff /* mask */ +#define __region_CS5_C 0x00010000 /* control */ +#define __region_CS2 0x20000000 /* FPGA registers */ +#define __region_CS2_M 0x000fffff +#define __region_CS2_C 0x00000000 +#define __region_CS1 0xfc100000 /* LAN registers */ +#define __region_CS1_M 0x000fffff +#define __region_CS1_C 0x00010404 +#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */ +#define __region_CS3_M 0x000fffff +#define __region_CS3_C 0xc8000000 +#define __region_CS4 0xfd000000 /* extra ROMs area */ +#define __region_CS4_M 0x00ffffff +#define __region_CS4_C 0x00000f07 + +#define __region_CS6 0xfe000000 /* not used - hide behind CPU resource I/O regs */ +#define __region_CS6_M 0x000fffff +#define __region_CS6_C 0x00000f07 +#define __region_CS7 0xfe000000 /* not used - hide behind CPU resource I/O regs */ +#define __region_CS7_M 0x000fffff +#define __region_CS7_C 0x00000f07 + +#define __is_PCI_IO(addr) 0 /* no PCI */ +#define __is_PCI_MEM(addr) 0 +#define __is_PCI_addr(addr) 0 +#define __region_PCI_IO 0 +#define __region_PCI_MEM 0 +#define __flush_PCI_writes() do { } while(0) + +#define __get_CLKSW() 0UL +#define __get_CLKIN() 66000000UL + +#define __addr_LEDS() (__region_CS2 + 0x00000023UL) +#define __set_LEDS(X) __builtin_write8((volatile void __iomem *) __addr_LEDS(), (X)) + +#define __addr_FPGATR() (__region_CS2 + 0x00000030UL) +#define __set_FPGATR(X) __builtin_write32((volatile void __iomem *) __addr_FPGATR(), (X)) +#define __get_FPGATR() __builtin_read32((volatile void __iomem *) __addr_FPGATR()) + +#define MB93093_FPGA_FPGATR_AUDIO_CLK 0x00000003 + +#define __set_FPGATR_AUDIO_CLK(V) \ + __set_FPGATR((__get_FPGATR() & ~MB93093_FPGA_FPGATR_AUDIO_CLK) | (V)) + +#define MB93093_FPGA_FPGATR_AUDIO_CLK_OFF 0x0 +#define MB93093_FPGA_FPGATR_AUDIO_CLK_11MHz 0x1 +#define MB93093_FPGA_FPGATR_AUDIO_CLK_12MHz 0x2 +#define MB93093_FPGA_FPGATR_AUDIO_CLK_02MHz 0x3 + +#define MB93093_FPGA_SWR_PUSHSWMASK (0x1F<<26) +#define MB93093_FPGA_SWR_PUSHSW4 (1<<29) + +#define __addr_FPGA_SWR ((volatile void __iomem *)(__region_CS2 + 0x28UL)) +#define __get_FPGA_PUSHSW1_5() (__builtin_read32(__addr_FPGA_SWR) & MB93093_FPGA_SWR_PUSHSWMASK) + + +#endif + +#endif /* _ASM_MB_REGS_H */ diff --git a/arch/frv/include/asm/mb86943a.h b/arch/frv/include/asm/mb86943a.h new file mode 100644 index 0000000..e87ef92 --- /dev/null +++ b/arch/frv/include/asm/mb86943a.h @@ -0,0 +1,42 @@ +/* mb86943a.h: MB86943 SPARClite <-> PCI bridge registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB86943A_H +#define _ASM_MB86943A_H + +#include + +#define __reg_MB86943_sl_ctl *(volatile uint32_t *) (__region_CS1 + 0x00) + +#define MB86943_SL_CTL_BUS_WIDTH_64 0x00000001 +#define MB86943_SL_CTL_AS_HOST 0x00000002 +#define MB86943_SL_CTL_DRCT_MASTER_SWAP 0x00000004 +#define MB86943_SL_CTL_DRCT_SLAVE_SWAP 0x00000008 +#define MB86943_SL_CTL_PCI_CONFIG_SWAP 0x00000010 +#define MB86943_SL_CTL_ECS0_ENABLE 0x00000020 +#define MB86943_SL_CTL_ECS1_ENABLE 0x00000040 +#define MB86943_SL_CTL_ECS2_ENABLE 0x00000080 + +#define __reg_MB86943_ecs_ctl(N) *(volatile uint32_t *) (__region_CS1 + 0x08 + (0x08*(N))) +#define __reg_MB86943_ecs_range(N) *(volatile uint32_t *) (__region_CS1 + 0x20 + (0x10*(N))) +#define __reg_MB86943_ecs_base(N) *(volatile uint32_t *) (__region_CS1 + 0x28 + (0x10*(N))) + +#define __reg_MB86943_sl_pci_io_range *(volatile uint32_t *) (__region_CS1 + 0x50) +#define __reg_MB86943_sl_pci_io_base *(volatile uint32_t *) (__region_CS1 + 0x58) +#define __reg_MB86943_sl_pci_mem_range *(volatile uint32_t *) (__region_CS1 + 0x60) +#define __reg_MB86943_sl_pci_mem_base *(volatile uint32_t *) (__region_CS1 + 0x68) +#define __reg_MB86943_pci_sl_io_base *(volatile uint32_t *) (__region_CS1 + 0x70) +#define __reg_MB86943_pci_sl_mem_base *(volatile uint32_t *) (__region_CS1 + 0x78) + +#define __reg_MB86943_pci_arbiter *(volatile uint32_t *) (__region_CS2 + 0x01300014) +#define MB86943_PCIARB_EN 0x00000001 + +#endif /* _ASM_MB86943A_H */ diff --git a/arch/frv/include/asm/mb93091-fpga-irqs.h b/arch/frv/include/asm/mb93091-fpga-irqs.h new file mode 100644 index 0000000..19778c5b --- /dev/null +++ b/arch/frv/include/asm/mb93091-fpga-irqs.h @@ -0,0 +1,42 @@ +/* mb93091-fpga-irqs.h: MB93091 CPU board FPGA IRQs + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB93091_FPGA_IRQS_H +#define _ASM_MB93091_FPGA_IRQS_H + +#include + +#ifndef __ASSEMBLY__ + +/* IRQ IDs presented to drivers */ +enum { + IRQ_FPGA__UNUSED = IRQ_BASE_FPGA, + IRQ_FPGA_SYSINT_BUS_EXPANSION_1, + IRQ_FPGA_SL_BUS_EXPANSION_2, + IRQ_FPGA_PCI_INTD, + IRQ_FPGA_PCI_INTC, + IRQ_FPGA_PCI_INTB, + IRQ_FPGA_PCI_INTA, + IRQ_FPGA_SL_BUS_EXPANSION_7, + IRQ_FPGA_SYSINT_BUS_EXPANSION_8, + IRQ_FPGA_SL_BUS_EXPANSION_9, + IRQ_FPGA_MB86943_PCI_INTA, + IRQ_FPGA_MB86943_SLBUS_SIDE, + IRQ_FPGA_RTL8029_INTA, + IRQ_FPGA_SYSINT_BUS_EXPANSION_13, + IRQ_FPGA_SL_BUS_EXPANSION_14, + IRQ_FPGA_NMI, +}; + + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MB93091_FPGA_IRQS_H */ diff --git a/arch/frv/include/asm/mb93093-fpga-irqs.h b/arch/frv/include/asm/mb93093-fpga-irqs.h new file mode 100644 index 0000000..590266b --- /dev/null +++ b/arch/frv/include/asm/mb93093-fpga-irqs.h @@ -0,0 +1,29 @@ +/* mb93093-fpga-irqs.h: MB93093 CPU board FPGA IRQs + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB93093_FPGA_IRQS_H +#define _ASM_MB93093_FPGA_IRQS_H + +#include + +#ifndef __ASSEMBLY__ + +/* IRQ IDs presented to drivers */ +enum { + IRQ_FPGA_PUSH_BUTTON_SW1_5 = IRQ_BASE_FPGA + 8, + IRQ_FPGA_ROCKER_C_SW8 = IRQ_BASE_FPGA + 9, + IRQ_FPGA_ROCKER_C_SW9 = IRQ_BASE_FPGA + 10, +}; + + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MB93093_FPGA_IRQS_H */ diff --git a/arch/frv/include/asm/mb93493-irqs.h b/arch/frv/include/asm/mb93493-irqs.h new file mode 100644 index 0000000..82c7aed --- /dev/null +++ b/arch/frv/include/asm/mb93493-irqs.h @@ -0,0 +1,50 @@ +/* mb93493-irqs.h: MB93493 companion chip IRQs + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB93493_IRQS_H +#define _ASM_MB93493_IRQS_H + +#include + +#ifndef __ASSEMBLY__ + +/* IRQ IDs presented to drivers */ +enum { + IRQ_MB93493_VDC = IRQ_BASE_MB93493 + 0, + IRQ_MB93493_VCC = IRQ_BASE_MB93493 + 1, + IRQ_MB93493_AUDIO_OUT = IRQ_BASE_MB93493 + 2, + IRQ_MB93493_I2C_0 = IRQ_BASE_MB93493 + 3, + IRQ_MB93493_I2C_1 = IRQ_BASE_MB93493 + 4, + IRQ_MB93493_USB = IRQ_BASE_MB93493 + 5, + IRQ_MB93493_LOCAL_BUS = IRQ_BASE_MB93493 + 7, + IRQ_MB93493_PCMCIA = IRQ_BASE_MB93493 + 8, + IRQ_MB93493_GPIO = IRQ_BASE_MB93493 + 9, + IRQ_MB93493_AUDIO_IN = IRQ_BASE_MB93493 + 10, +}; + +/* IRQ multiplexor mappings */ +#define ROUTE_VIA_IRQ0 0 /* route IRQ by way of CPU external IRQ 0 */ +#define ROUTE_VIA_IRQ1 1 /* route IRQ by way of CPU external IRQ 1 */ + +#define IRQ_MB93493_VDC_ROUTE ROUTE_VIA_IRQ0 +#define IRQ_MB93493_VCC_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_AUDIO_OUT_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_I2C_0_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_I2C_1_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_USB_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_LOCAL_BUS_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_PCMCIA_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_GPIO_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_AUDIO_IN_ROUTE ROUTE_VIA_IRQ1 + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MB93493_IRQS_H */ diff --git a/arch/frv/include/asm/mb93493-regs.h b/arch/frv/include/asm/mb93493-regs.h new file mode 100644 index 0000000..8a1f6aa --- /dev/null +++ b/arch/frv/include/asm/mb93493-regs.h @@ -0,0 +1,281 @@ +/* mb93493-regs.h: MB93493 companion chip registers + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB93493_REGS_H +#define _ASM_MB93493_REGS_H + +#include +#include + +#define __addr_MB93493(X) ((volatile unsigned long *)(__region_CS3 + (X))) +#define __get_MB93493(X) ({ *(volatile unsigned long *)(__region_CS3 + (X)); }) + +#define __set_MB93493(X,V) \ +do { \ + *(volatile unsigned long *)(__region_CS3 + (X)) = (V); mb(); \ +} while(0) + +#define __get_MB93493_STSR(X) __get_MB93493(0x3c0 + (X) * 4) +#define __set_MB93493_STSR(X,V) __set_MB93493(0x3c0 + (X) * 4, (V)) +#define MB93493_STSR_EN + +#define __addr_MB93493_IQSR(X) __addr_MB93493(0x3d0 + (X) * 4) +#define __get_MB93493_IQSR(X) __get_MB93493(0x3d0 + (X) * 4) +#define __set_MB93493_IQSR(X,V) __set_MB93493(0x3d0 + (X) * 4, (V)) + +#define __get_MB93493_DQSR(X) __get_MB93493(0x3e0 + (X) * 4) +#define __set_MB93493_DQSR(X,V) __set_MB93493(0x3e0 + (X) * 4, (V)) + +#define __get_MB93493_LBSER() __get_MB93493(0x3f0) +#define __set_MB93493_LBSER(V) __set_MB93493(0x3f0, (V)) + +#define MB93493_LBSER_VDC 0x00010000 +#define MB93493_LBSER_VCC 0x00020000 +#define MB93493_LBSER_AUDIO 0x00040000 +#define MB93493_LBSER_I2C_0 0x00080000 +#define MB93493_LBSER_I2C_1 0x00100000 +#define MB93493_LBSER_USB 0x00200000 +#define MB93493_LBSER_GPIO 0x00800000 +#define MB93493_LBSER_PCMCIA 0x01000000 + +#define __get_MB93493_LBSR() __get_MB93493(0x3fc) +#define __set_MB93493_LBSR(V) __set_MB93493(0x3fc, (V)) + +/* + * video display controller + */ +#define __get_MB93493_VDC(X) __get_MB93493(MB93493_VDC_##X) +#define __set_MB93493_VDC(X,V) __set_MB93493(MB93493_VDC_##X, (V)) + +#define MB93493_VDC_RCURSOR 0x140 /* cursor position */ +#define MB93493_VDC_RCT1 0x144 /* cursor colour 1 */ +#define MB93493_VDC_RCT2 0x148 /* cursor colour 2 */ +#define MB93493_VDC_RHDC 0x150 /* horizontal display period */ +#define MB93493_VDC_RH_MARGINS 0x154 /* horizontal margin sizes */ +#define MB93493_VDC_RVDC 0x158 /* vertical display period */ +#define MB93493_VDC_RV_MARGINS 0x15c /* vertical margin sizes */ +#define MB93493_VDC_RC 0x170 /* VDC control */ +#define MB93493_VDC_RCLOCK 0x174 /* clock divider, DMA req delay */ +#define MB93493_VDC_RBLACK 0x178 /* black insert sizes */ +#define MB93493_VDC_RS 0x17c /* VDC status */ + +#define __addr_MB93493_VDC_BCI(X) ({ (volatile unsigned long *)(__region_CS3 + 0x000 + (X)); }) +#define __addr_MB93493_VDC_TPO(X) (__region_CS3 + 0x1c0 + (X)) + +#define VDC_TPO_WIDTH 32 + +#define VDC_RC_DSR 0x00000080 /* VDC master reset */ + +#define VDC_RS_IT 0x00060000 /* interrupt indicators */ +#define VDC_RS_IT_UNDERFLOW 0x00040000 /* - underflow event */ +#define VDC_RS_IT_VSYNC 0x00020000 /* - VSYNC event */ +#define VDC_RS_DFI 0x00010000 /* current interlace field number */ +#define VDC_RS_DFI_TOP 0x00000000 /* - top field */ +#define VDC_RS_DFI_BOTTOM 0x00010000 /* - bottom field */ +#define VDC_RS_DCSR 0x00000010 /* cursor state */ +#define VDC_RS_DCM 0x00000003 /* display mode */ +#define VDC_RS_DCM_DISABLED 0x00000000 /* - display disabled */ +#define VDC_RS_DCM_STOPPED 0x00000001 /* - VDC stopped */ +#define VDC_RS_DCM_FREERUNNING 0x00000002 /* - VDC free-running */ +#define VDC_RS_DCM_TRANSFERRING 0x00000003 /* - data being transferred to VDC */ + +/* + * video capture controller + */ +#define __get_MB93493_VCC(X) __get_MB93493(MB93493_VCC_##X) +#define __set_MB93493_VCC(X,V) __set_MB93493(MB93493_VCC_##X, (V)) + +#define MB93493_VCC_RREDUCT 0x104 /* reduction rate */ +#define MB93493_VCC_RHY 0x108 /* horizontal brightness filter coefficients */ +#define MB93493_VCC_RHC 0x10c /* horizontal colour-difference filter coefficients */ +#define MB93493_VCC_RHSIZE 0x110 /* horizontal cycle sizes */ +#define MB93493_VCC_RHBC 0x114 /* horizontal back porch size */ +#define MB93493_VCC_RVCC 0x118 /* vertical capture period */ +#define MB93493_VCC_RVBC 0x11c /* vertical back porch period */ +#define MB93493_VCC_RV 0x120 /* vertical filter coefficients */ +#define MB93493_VCC_RDTS 0x128 /* DMA transfer size */ +#define MB93493_VCC_RDTS_4B 0x01000000 /* 4-byte transfer */ +#define MB93493_VCC_RDTS_32B 0x03000000 /* 32-byte transfer */ +#define MB93493_VCC_RDTS_SHIFT 24 +#define MB93493_VCC_RCC 0x130 /* VCC control */ +#define MB93493_VCC_RIS 0x134 /* VCC interrupt status */ + +#define __addr_MB93493_VCC_TPI(X) (__region_CS3 + 0x180 + (X)) + +#define VCC_RHSIZE_RHCC 0x000007ff +#define VCC_RHSIZE_RHCC_SHIFT 0 +#define VCC_RHSIZE_RHTCC 0x0fff0000 +#define VCC_RHSIZE_RHTCC_SHIFT 16 + +#define VCC_RVBC_RVBC 0x00003f00 +#define VCC_RVBC_RVBC_SHIFT 8 + +#define VCC_RREDUCT_RHR 0x07ff0000 +#define VCC_RREDUCT_RHR_SHIFT 16 +#define VCC_RREDUCT_RVR 0x000007ff +#define VCC_RREDUCT_RVR_SHIFT 0 + +#define VCC_RCC_CE 0x00000001 /* VCC enable */ +#define VCC_RCC_CS 0x00000002 /* request video capture start */ +#define VCC_RCC_CPF 0x0000000c /* pixel format */ +#define VCC_RCC_CPF_YCBCR_16 0x00000000 /* - YCbCr 4:2:2 16-bit format */ +#define VCC_RCC_CPF_RGB 0x00000004 /* - RGB 4:4:4 format */ +#define VCC_RCC_CPF_YCBCR_24 0x00000008 /* - YCbCr 4:2:2 24-bit format */ +#define VCC_RCC_CPF_BT656 0x0000000c /* - ITU R-BT.656 format */ +#define VCC_RCC_CPF_SHIFT 2 +#define VCC_RCC_CSR 0x00000080 /* request reset */ +#define VCC_RCC_HSIP 0x00000100 /* HSYNC polarity */ +#define VCC_RCC_HSIP_LOACT 0x00000000 /* - low active */ +#define VCC_RCC_HSIP_HIACT 0x00000100 /* - high active */ +#define VCC_RCC_VSIP 0x00000200 /* VSYNC polarity */ +#define VCC_RCC_VSIP_LOACT 0x00000000 /* - low active */ +#define VCC_RCC_VSIP_HIACT 0x00000200 /* - high active */ +#define VCC_RCC_CIE 0x00000800 /* interrupt enable */ +#define VCC_RCC_CFP 0x00001000 /* RGB pixel packing */ +#define VCC_RCC_CFP_4TO3 0x00000000 /* - pack 4 pixels into 3 words */ +#define VCC_RCC_CFP_1TO1 0x00001000 /* - pack 1 pixel into 1 words */ +#define VCC_RCC_CSM 0x00006000 /* interlace specification */ +#define VCC_RCC_CSM_ONEPASS 0x00002000 /* - non-interlaced */ +#define VCC_RCC_CSM_INTERLACE 0x00004000 /* - interlaced */ +#define VCC_RCC_CSM_SHIFT 13 +#define VCC_RCC_ES 0x00008000 /* capture start polarity */ +#define VCC_RCC_ES_NEG 0x00000000 /* - negative edge */ +#define VCC_RCC_ES_POS 0x00008000 /* - positive edge */ +#define VCC_RCC_IFI 0x00080000 /* inferlace field evaluation reverse */ +#define VCC_RCC_FDTS 0x00300000 /* interlace field start */ +#define VCC_RCC_FDTS_3_8 0x00000000 /* - 3/8 of horizontal entire cycle */ +#define VCC_RCC_FDTS_1_4 0x00100000 /* - 1/4 of horizontal entire cycle */ +#define VCC_RCC_FDTS_7_16 0x00200000 /* - 7/16 of horizontal entire cycle */ +#define VCC_RCC_FDTS_SHIFT 20 +#define VCC_RCC_MOV 0x00400000 /* test bit - always set to 1 */ +#define VCC_RCC_STP 0x00800000 /* request video capture stop */ +#define VCC_RCC_TO 0x01000000 /* input during top-field only */ + +#define VCC_RIS_VSYNC 0x01000000 /* VSYNC interrupt */ +#define VCC_RIS_OV 0x02000000 /* overflow interrupt */ +#define VCC_RIS_BOTTOM 0x08000000 /* interlace bottom field */ +#define VCC_RIS_STARTED 0x10000000 /* capture started */ + +/* + * I2C + */ +#define MB93493_I2C_BSR 0x340 /* bus status */ +#define MB93493_I2C_BCR 0x344 /* bus control */ +#define MB93493_I2C_CCR 0x348 /* clock control */ +#define MB93493_I2C_ADR 0x34c /* address */ +#define MB93493_I2C_DTR 0x350 /* data */ +#define MB93493_I2C_BC2R 0x35c /* bus control 2 */ + +#define __addr_MB93493_I2C(port,X) (__region_CS3 + MB93493_I2C_##X + ((port)*0x20)) +#define __get_MB93493_I2C(port,X) __get_MB93493(MB93493_I2C_##X + ((port)*0x20)) +#define __set_MB93493_I2C(port,X,V) __set_MB93493(MB93493_I2C_##X + ((port)*0x20), (V)) + +#define I2C_BSR_BB (1 << 7) + +/* + * audio controller (I2S) registers + */ +#define __get_MB93493_I2S(X) __get_MB93493(MB93493_I2S_##X) +#define __set_MB93493_I2S(X,V) __set_MB93493(MB93493_I2S_##X, (V)) + +#define MB93493_I2S_ALDR 0x300 /* L-channel data */ +#define MB93493_I2S_ARDR 0x304 /* R-channel data */ +#define MB93493_I2S_APDR 0x308 /* 16-bit packed data */ +#define MB93493_I2S_AISTR 0x310 /* status */ +#define MB93493_I2S_AICR 0x314 /* control */ + +#define __addr_MB93493_I2S_ALDR(X) (__region_CS3 + MB93493_I2S_ALDR + (X)) +#define __addr_MB93493_I2S_ARDR(X) (__region_CS3 + MB93493_I2S_ARDR + (X)) +#define __addr_MB93493_I2S_APDR(X) (__region_CS3 + MB93493_I2S_APDR + (X)) +#define __addr_MB93493_I2S_ADR(X) (__region_CS3 + 0x320 + (X)) + +#define I2S_AISTR_OTST 0x00000003 /* status of output data transfer */ +#define I2S_AISTR_OTR 0x00000010 /* output transfer request pending */ +#define I2S_AISTR_OUR 0x00000020 /* output FIFO underrun detected */ +#define I2S_AISTR_OOR 0x00000040 /* output FIFO overrun detected */ +#define I2S_AISTR_ODS 0x00000100 /* output DMA transfer size */ +#define I2S_AISTR_ODE 0x00000400 /* output DMA transfer request enable */ +#define I2S_AISTR_OTRIE 0x00001000 /* output transfer request interrupt enable */ +#define I2S_AISTR_OURIE 0x00002000 /* output FIFO underrun interrupt enable */ +#define I2S_AISTR_OORIE 0x00004000 /* output FIFO overrun interrupt enable */ +#define I2S_AISTR__OUT_MASK 0x00007570 +#define I2S_AISTR_ITST 0x00030000 /* status of input data transfer */ +#define I2S_AISTR_ITST_SHIFT 16 +#define I2S_AISTR_ITR 0x00100000 /* input transfer request pending */ +#define I2S_AISTR_IUR 0x00200000 /* input FIFO underrun detected */ +#define I2S_AISTR_IOR 0x00400000 /* input FIFO overrun detected */ +#define I2S_AISTR_IDS 0x01000000 /* input DMA transfer size */ +#define I2S_AISTR_IDE 0x04000000 /* input DMA transfer request enable */ +#define I2S_AISTR_ITRIE 0x10000000 /* input transfer request interrupt enable */ +#define I2S_AISTR_IURIE 0x20000000 /* input FIFO underrun interrupt enable */ +#define I2S_AISTR_IORIE 0x40000000 /* input FIFO overrun interrupt enable */ +#define I2S_AISTR__IN_MASK 0x75700000 + +#define I2S_AICR_MI 0x00000001 /* mono input requested */ +#define I2S_AICR_AMI 0x00000002 /* relation between LRCKI/FS1 and SDI */ +#define I2S_AICR_LRI 0x00000004 /* function of LRCKI pin */ +#define I2S_AICR_SDMI 0x00000070 /* format of input audio data */ +#define I2S_AICR_SDMI_SHIFT 4 +#define I2S_AICR_CLI 0x00000080 /* input FIFO clearing control */ +#define I2S_AICR_IM 0x00000300 /* input state control */ +#define I2S_AICR_IM_SHIFT 8 +#define I2S_AICR__IN_MASK 0x000003f7 +#define I2S_AICR_MO 0x00001000 /* mono output requested */ +#define I2S_AICR_AMO 0x00002000 /* relation between LRCKO/FS0 and SDO */ +#define I2S_AICR_AMO_SHIFT 13 +#define I2S_AICR_LRO 0x00004000 /* function of LRCKO pin */ +#define I2S_AICR_SDMO 0x00070000 /* format of output audio data */ +#define I2S_AICR_SDMO_SHIFT 16 +#define I2S_AICR_CLO 0x00080000 /* output FIFO clearing control */ +#define I2S_AICR_OM 0x00100000 /* output state control */ +#define I2S_AICR__OUT_MASK 0x001f7000 +#define I2S_AICR_DIV 0x03000000 /* frequency division rate */ +#define I2S_AICR_DIV_SHIFT 24 +#define I2S_AICR_FL 0x20000000 /* frame length */ +#define I2S_AICR_FS 0x40000000 /* frame sync method */ +#define I2S_AICR_ME 0x80000000 /* master enable */ + +/* + * PCMCIA + */ +#define __addr_MB93493_PCMCIA(X) ((volatile unsigned long *)(__region_CS5 + (X))) + +/* + * GPIO + */ +#define __get_MB93493_GPIO_PDR(X) __get_MB93493(0x380 + (X) * 0xc0) +#define __set_MB93493_GPIO_PDR(X,V) __set_MB93493(0x380 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_GPDR(X) __get_MB93493(0x384 + (X) * 0xc0) +#define __set_MB93493_GPIO_GPDR(X,V) __set_MB93493(0x384 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_SIR(X) __get_MB93493(0x388 + (X) * 0xc0) +#define __set_MB93493_GPIO_SIR(X,V) __set_MB93493(0x388 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_SOR(X) __get_MB93493(0x38c + (X) * 0xc0) +#define __set_MB93493_GPIO_SOR(X,V) __set_MB93493(0x38c + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_PDSR(X) __get_MB93493(0x390 + (X) * 0xc0) +#define __set_MB93493_GPIO_PDSR(X,V) __set_MB93493(0x390 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_PDCR(X) __get_MB93493(0x394 + (X) * 0xc0) +#define __set_MB93493_GPIO_PDCR(X,V) __set_MB93493(0x394 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_INTST(X) __get_MB93493(0x398 + (X) * 0xc0) +#define __set_MB93493_GPIO_INTST(X,V) __set_MB93493(0x398 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_IEHL(X) __get_MB93493(0x39c + (X) * 0xc0) +#define __set_MB93493_GPIO_IEHL(X,V) __set_MB93493(0x39c + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_IELH(X) __get_MB93493(0x3a0 + (X) * 0xc0) +#define __set_MB93493_GPIO_IELH(X,V) __set_MB93493(0x3a0 + (X) * 0xc0, (V)) + +#endif /* _ASM_MB93493_REGS_H */ diff --git a/arch/frv/include/asm/mc146818rtc.h b/arch/frv/include/asm/mc146818rtc.h new file mode 100644 index 0000000..90dfb7a --- /dev/null +++ b/arch/frv/include/asm/mc146818rtc.h @@ -0,0 +1,16 @@ +/* mc146818rtc.h: RTC defs + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/frv/include/asm/mem-layout.h b/arch/frv/include/asm/mem-layout.h new file mode 100644 index 0000000..2947764 --- /dev/null +++ b/arch/frv/include/asm/mem-layout.h @@ -0,0 +1,86 @@ +/* mem-layout.h: memory layout + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MEM_LAYOUT_H +#define _ASM_MEM_LAYOUT_H + +#ifndef __ASSEMBLY__ +#define __UL(X) ((unsigned long) (X)) +#else +#define __UL(X) (X) +#endif + +/* + * PAGE_SHIFT determines the page size + */ +#define PAGE_SHIFT 14 + +#ifndef __ASSEMBLY__ +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#else +#define PAGE_SIZE (1 << PAGE_SHIFT) +#endif + +#define PAGE_MASK (~(PAGE_SIZE-1)) + +/* + * the slab must be aligned such that load- and store-double instructions don't + * fault if used + */ +#define ARCH_KMALLOC_MINALIGN 8 +#define ARCH_SLAB_MINALIGN 8 + +/*****************************************************************************/ +/* + * virtual memory layout from kernel's point of view + */ +#define PAGE_OFFSET ((unsigned long) &__page_offset) + +#ifdef CONFIG_MMU + +/* see Documentation/frv/mmu-layout.txt */ +#define KERNEL_LOWMEM_START __UL(0xc0000000) +#define KERNEL_LOWMEM_END __UL(0xd0000000) +#define VMALLOC_START __UL(0xd0000000) +#define VMALLOC_END __UL(0xd8000000) +#define PKMAP_BASE __UL(0xd8000000) +#define PKMAP_END __UL(0xdc000000) +#define KMAP_ATOMIC_SECONDARY_FRAME __UL(0xdc000000) +#define KMAP_ATOMIC_PRIMARY_FRAME __UL(0xdd000000) + +#endif + +#define KERNEL_IO_START __UL(0xe0000000) + + +/*****************************************************************************/ +/* + * memory layout from userspace's point of view + */ +#define BRK_BASE __UL(2 * 1024 * 1024 + PAGE_SIZE) +#define STACK_TOP __UL(2 * 1024 * 1024) +#define STACK_TOP_MAX __UL(0xc0000000) + +/* userspace process size */ +#ifdef CONFIG_MMU +#define TASK_SIZE (PAGE_OFFSET) +#else +#define TASK_SIZE __UL(0xFFFFFFFFUL) +#endif + +/* base of area at which unspecified mmaps will start */ +#ifdef CONFIG_BINFMT_ELF_FDPIC +#define TASK_UNMAPPED_BASE __UL(16 * 1024 * 1024) +#else +#define TASK_UNMAPPED_BASE __UL(TASK_SIZE / 3) +#endif + +#endif /* _ASM_MEM_LAYOUT_H */ diff --git a/arch/frv/include/asm/mman.h b/arch/frv/include/asm/mman.h new file mode 100644 index 0000000..b4371e9 --- /dev/null +++ b/arch/frv/include/asm/mman.h @@ -0,0 +1,18 @@ +#ifndef __ASM_MMAN_H__ +#define __ASM_MMAN_H__ + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __ASM_MMAN_H__ */ + diff --git a/arch/frv/include/asm/mmu.h b/arch/frv/include/asm/mmu.h new file mode 100644 index 0000000..86ca0e8 --- /dev/null +++ b/arch/frv/include/asm/mmu.h @@ -0,0 +1,41 @@ +/* mmu.h: memory management context for FR-V with or without MMU support + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_MMU_H +#define _ASM_MMU_H + +typedef struct { +#ifdef CONFIG_MMU + struct list_head id_link; /* link in list of context ID owners */ + unsigned short id; /* MMU context ID */ + unsigned short id_busy; /* true if ID is in CXNR */ + unsigned long itlb_cached_pge; /* [SCR0] PGE cached for insn TLB handler */ + unsigned long itlb_ptd_mapping; /* [DAMR4] PTD mapping for itlb cached PGE */ + unsigned long dtlb_cached_pge; /* [SCR1] PGE cached for data TLB handler */ + unsigned long dtlb_ptd_mapping; /* [DAMR5] PTD mapping for dtlb cached PGE */ + +#else + unsigned long end_brk; + +#endif + +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif + +} mm_context_t; + +#ifdef CONFIG_MMU +extern int __nongpreldata cxn_pinned; +extern int cxn_pin_by_pid(pid_t pid); +#endif + +#endif /* _ASM_MMU_H */ diff --git a/arch/frv/include/asm/mmu_context.h b/arch/frv/include/asm/mmu_context.h new file mode 100644 index 0000000..c7daa39 --- /dev/null +++ b/arch/frv/include/asm/mmu_context.h @@ -0,0 +1,50 @@ +/* mmu_context.h: MMU context management routines + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MMU_CONTEXT_H +#define _ASM_MMU_CONTEXT_H + +#include +#include +#include +#include + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +#ifdef CONFIG_MMU +extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); +extern void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *_pgd); +extern void destroy_context(struct mm_struct *mm); + +#else +#define init_new_context(tsk, mm) ({ 0; }) +#define change_mm_context(old, ctx, _pml4) do {} while(0) +#define destroy_context(mm) do {} while(0) +#endif + +#define switch_mm(prev, next, tsk) \ +do { \ + if (prev != next) \ + change_mm_context(&prev->context, &next->context, next->pgd); \ +} while(0) + +#define activate_mm(prev, next) \ +do { \ + change_mm_context(&prev->context, &next->context, next->pgd); \ +} while(0) + +#define deactivate_mm(tsk, mm) \ +do { \ +} while(0) + +#endif diff --git a/arch/frv/include/asm/module.h b/arch/frv/include/asm/module.h new file mode 100644 index 0000000..3d5c636 --- /dev/null +++ b/arch/frv/include/asm/module.h @@ -0,0 +1,28 @@ +/* module.h: FRV module stuff + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_MODULE_H +#define _ASM_MODULE_H + +struct mod_arch_specific +{ +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +/* + * Include the architecture version. + */ +#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " " + +#endif /* _ASM_MODULE_H */ + diff --git a/arch/frv/include/asm/msgbuf.h b/arch/frv/include/asm/msgbuf.h new file mode 100644 index 0000000..97ceb55 --- /dev/null +++ b/arch/frv/include/asm/msgbuf.h @@ -0,0 +1,32 @@ +#ifndef _ASM_MSGBUF_H +#define _ASM_MSGBUF_H + +/* + * The msqid64_ds structure for FR-V architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_MSGBUF_H */ + diff --git a/arch/frv/include/asm/mutex.h b/arch/frv/include/asm/mutex.h new file mode 100644 index 0000000..458c1f7 --- /dev/null +++ b/arch/frv/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h new file mode 100644 index 0000000..bd9c220 --- /dev/null +++ b/arch/frv/include/asm/page.h @@ -0,0 +1,78 @@ +#ifndef _ASM_PAGE_H +#define _ASM_PAGE_H + +#include +#include +#include +#include + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE) +#define copy_user_page(vto, vfrom, vaddr, topg) memcpy((vto), (vfrom), PAGE_SIZE) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long ste[64];} pmd_t; +typedef struct { pmd_t pue[1]; } pud_t; +typedef struct { pud_t pge[1]; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).ste[0]) +#define pud_val(x) ((x).pue[0]) +#define pgd_val(x) ((x).pge[0]) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pud(x) ((pud_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) +#define PTE_MASK PAGE_MASK + +#define devmem_is_allowed(pfn) 1 + +#define __pa(vaddr) virt_to_phys((void *) (unsigned long) (vaddr)) +#define __va(paddr) phys_to_virt((unsigned long) (paddr)) + +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +extern unsigned long max_low_pfn; +extern unsigned long min_low_pfn; +extern unsigned long max_pfn; + +#ifdef CONFIG_MMU +#define pfn_valid(pfn) ((pfn) < max_mapnr) +#else +#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) +#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) + +#endif + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + + +#ifdef CONFIG_MMU +#define VM_DATA_DEFAULT_FLAGS \ + (VM_READ | VM_WRITE | \ + ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) +#endif + +#endif /* __ASSEMBLY__ */ + +#include +#include + +#endif /* _ASM_PAGE_H */ diff --git a/arch/frv/include/asm/param.h b/arch/frv/include/asm/param.h new file mode 100644 index 0000000..6859dd5 --- /dev/null +++ b/arch/frv/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef _ASM_PARAM_H +#define _ASM_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ /* Internal kernel timer frequency */ +#define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +#define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 16384 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_PARAM_H */ diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h new file mode 100644 index 0000000..585d9b4 --- /dev/null +++ b/arch/frv/include/asm/pci.h @@ -0,0 +1,118 @@ +/* pci.h: FR-V specific PCI declarations + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-m68k/pci.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef ASM_PCI_H +#define ASM_PCI_H + +#include +#include +#include +#include + +struct pci_dev; + +#define pcibios_assign_all_busses() 0 + +extern void pcibios_set_master(struct pci_dev *dev); + +extern void pcibios_penalize_isa_irq(int irq); + +#ifdef CONFIG_MMU +extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle); +extern void consistent_free(void *vaddr); +extern void consistent_sync(void *vaddr, size_t size, int direction); +extern void consistent_sync_page(struct page *page, unsigned long offset, + size_t size, int direction); +#endif + +extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, + dma_addr_t *dma_handle); + +extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +/* Return the index of the PCI controller for device PDEV. */ +#define pci_controller_num(PDEV) (0) + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +/* + * These are pretty much arbitary with the CoMEM implementation. + * We have the whole address space to ourselves. + */ +#define PCIBIOS_MIN_IO 0x100 +#define PCIBIOS_MIN_MEM 0x00010000 + +/* Make physical memory consistent for a single + * streaming mode DMA translation after a transfer. + * + * If you perform a pci_map_single() but wish to interrogate the + * buffer using the cpu, yet do not wish to teardown the PCI dma + * mapping, you must call this function before doing so. At the + * next point you give the PCI dma address back to the card, the + * device again owns the buffer. + */ +static inline void pci_dma_sync_single(struct pci_dev *hwdev, + dma_addr_t dma_handle, + size_t size, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle), + (unsigned long)bus_to_virt(dma_handle) + size); +} + +/* Make physical memory consistent for a set of streaming + * mode DMA translations after a transfer. + * + * The same as pci_dma_sync_single but for a scatter-gather list, + * same rules and usage. + */ +static inline void pci_dma_sync_sg(struct pci_dev *hwdev, + struct scatterlist *sg, + int nelems, int direction) +{ + int i; + + if (direction == PCI_DMA_NONE) + BUG(); + + for (i = 0; i < nelems; i++) + frv_cache_wback_inv(sg_dma_address(&sg[i]), + sg_dma_address(&sg[i])+sg_dma_len(&sg[i])); +} + + +#endif diff --git a/arch/frv/include/asm/percpu.h b/arch/frv/include/asm/percpu.h new file mode 100644 index 0000000..2cad3f8 --- /dev/null +++ b/arch/frv/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ASM_PERCPU_H +#define __ASM_PERCPU_H + +#include + +#endif /* __ASM_PERCPU_H */ diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h new file mode 100644 index 0000000..971e6ad --- /dev/null +++ b/arch/frv/include/asm/pgalloc.h @@ -0,0 +1,69 @@ +/* pgalloc.h: Page allocation routines for FRV + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Derived from: + * include/asm-m68knommu/pgalloc.h + * include/asm-i386/pgalloc.h + */ +#ifndef _ASM_PGALLOC_H +#define _ASM_PGALLOC_H + +#include +#include + +#ifdef CONFIG_MMU + +#define pmd_populate_kernel(mm, pmd, pte) __set_pmd(pmd, __pa(pte) | _PAGE_TABLE) +#define pmd_populate(MM, PMD, PAGE) \ +do { \ + __set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE); \ +} while(0) +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * Allocate and free page tables. + */ + +extern pgd_t *pgd_alloc(struct mm_struct *); +extern void pgd_free(struct mm_struct *mm, pgd_t *); + +extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); + +extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long); + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long)pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + __free_page(pte); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb),(pte)); \ +} while (0) + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + * (In the PAE case we free the pmds as part of the pgd.) + */ +#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); }) +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb,x) do { } while (0) + +#endif /* CONFIG_MMU */ + +#endif /* _ASM_PGALLOC_H */ diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h new file mode 100644 index 0000000..3323301 --- /dev/null +++ b/arch/frv/include/asm/pgtable.h @@ -0,0 +1,549 @@ +/* pgtable.h: FR-V page table mangling + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Derived from: + * include/asm-m68knommu/pgtable.h + * include/asm-i386/pgtable.h + */ + +#ifndef _ASM_PGTABLE_H +#define _ASM_PGTABLE_H + +#include +#include +#include + +#ifndef __ASSEMBLY__ +#include +#include +#include +#include +#include +struct vm_area_struct; +#endif + +#ifndef __ASSEMBLY__ +#if defined(CONFIG_HIGHPTE) +typedef unsigned long pte_addr_t; +#else +typedef pte_t *pte_addr_t; +#endif +#endif + +/*****************************************************************************/ +/* + * MMU-less operation case first + */ +#ifndef CONFIG_MMU + +#define pgd_present(pgd) (1) /* pages are always present on NO_MM */ +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) +#define pmd_offset(a, b) ((void *) 0) + +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#ifndef __ASSEMBLY__ +static inline int pte_file(pte_t pte) { return 0; } +#endif + +#define ZERO_PAGE(vaddr) ({ BUG(); NULL; }) + +#define swapper_pg_dir ((pgd_t *) NULL) + +#define pgtable_cache_init() do {} while (0) + +#include + +#else /* !CONFIG_MMU */ +/*****************************************************************************/ +/* + * then MMU operation + */ + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#ifndef __ASSEMBLY__ +extern unsigned long empty_zero_page; +#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page) +#endif + +/* + * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry) + * [see Documentation/frv/mmu-layout.txt] + * + * Page Directory: + * - Size: 16KB + * - 64 PGEs per PGD + * - Each PGE holds 1 PUD and covers 64MB + * + * Page Upper Directory: + * - Size: 256B + * - 1 PUE per PUD + * - Each PUE holds 1 PMD and covers 64MB + * + * Page Mid-Level Directory + * - Size: 256B + * - 1 PME per PMD + * - Each PME holds 64 STEs, all of which point to separate chunks of the same Page Table + * - All STEs are instantiated at the same time + * + * Page Table + * - Size: 16KB + * - 4096 PTEs per PT + * - Each Linux PT is subdivided into 64 FR451 PT's, each of which holds 64 entries + * + * Pages + * - Size: 4KB + * + * total PTEs + * = 1 PML4E * 64 PGEs * 1 PUEs * 1 PMEs * 4096 PTEs + * = 1 PML4E * 64 PGEs * 64 STEs * 64 PTEs/FR451-PT + * = 262144 (or 256 * 1024) + */ +#define PGDIR_SHIFT 26 +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE - 1)) +#define PTRS_PER_PGD 64 + +#define PUD_SHIFT 26 +#define PTRS_PER_PUD 1 +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE - 1)) +#define PUE_SIZE 256 + +#define PMD_SHIFT 26 +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE - 1)) +#define PTRS_PER_PMD 1 +#define PME_SIZE 256 + +#define __frv_PT_SIZE 256 + +#define PTRS_PER_PTE 4096 + +#define USER_PGDS_IN_LAST_PML4 (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) +#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS) + +#define TWOLEVEL_PGDIR_SHIFT 26 +#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) +#define BOOT_KERNEL_PGD_PTRS (PTRS_PER_PGD - BOOT_USER_PGD_PTRS) + +#ifndef __ASSEMBLY__ + +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pud_ERROR(e) \ + printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(e))) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(pgd_val(e)))) + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) \ +do { \ + *(pteptr) = (pteval); \ + asm volatile("dcf %M0" :: "U"(*pteptr)); \ +} while(0) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * pgd_offset() returns a (pgd_t *) + * pgd_index() is used get the offset into the pgd page's array of pgd_t's; + */ +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* + * a shortcut which implies the use of the kernel's pgd, instead + * of a process's + */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * The "pgd_xxx()" functions here are trivial for a folded two-level + * setup: the pud is never bad, and a pud always exists (as it's folded + * into the pgd entry) + */ +static inline int pgd_none(pgd_t pgd) { return 0; } +static inline int pgd_bad(pgd_t pgd) { return 0; } +static inline int pgd_present(pgd_t pgd) { return 1; } +static inline void pgd_clear(pgd_t *pgd) { } + +#define pgd_populate(mm, pgd, pud) do { } while (0) +/* + * (puds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pgd(pgdptr, pgdval) \ +do { \ + memcpy((pgdptr), &(pgdval), sizeof(pgd_t)); \ + asm volatile("dcf %M0" :: "U"(*(pgdptr))); \ +} while(0) + +static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) +{ + return (pud_t *) pgd; +} + +#define pgd_page(pgd) (pud_page((pud_t){ pgd })) +#define pgd_page_vaddr(pgd) (pud_page_vaddr((pud_t){ pgd })) + +/* + * allocating and freeing a pud is trivial: the 1-entry pud is + * inside the pgd, so has no extra memory associated with it. + */ +#define pud_alloc_one(mm, address) NULL +#define pud_free(mm, x) do { } while (0) +#define __pud_free_tlb(tlb, x) do { } while (0) + +/* + * The "pud_xxx()" functions here are trivial for a folded two-level + * setup: the pmd is never bad, and a pmd always exists (as it's folded + * into the pud entry) + */ +static inline int pud_none(pud_t pud) { return 0; } +static inline int pud_bad(pud_t pud) { return 0; } +static inline int pud_present(pud_t pud) { return 1; } +static inline void pud_clear(pud_t *pud) { } + +#define pud_populate(mm, pmd, pte) do { } while (0) + +/* + * (pmds are folded into puds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pud(pudptr, pudval) set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval }) + +#define pud_page(pud) (pmd_page((pmd_t){ pud })) +#define pud_page_vaddr(pud) (pmd_page_vaddr((pmd_t){ pud })) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +extern void __set_pmd(pmd_t *pmdptr, unsigned long __pmd); + +#define set_pmd(pmdptr, pmdval) \ +do { \ + __set_pmd((pmdptr), (pmdval).ste[0]); \ +} while(0) + +#define __pmd_index(address) 0 + +static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address) +{ + return (pmd_t *) dir + __pmd_index(address); +} + +#define pte_same(a, b) ((a).pte == (b).pte) +#define pte_page(x) (mem_map + ((unsigned long)(((x).pte >> PAGE_SHIFT)))) +#define pte_none(x) (!(x).pte) +#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT))) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define VMALLOC_VMADDR(x) ((unsigned long) (x)) + +#endif /* !__ASSEMBLY__ */ + +/* + * control flags in AMPR registers and TLB entries + */ +#define _PAGE_BIT_PRESENT xAMPRx_V_BIT +#define _PAGE_BIT_WP DAMPRx_WP_BIT +#define _PAGE_BIT_NOCACHE xAMPRx_C_BIT +#define _PAGE_BIT_SUPER xAMPRx_S_BIT +#define _PAGE_BIT_ACCESSED xAMPRx_RESERVED8_BIT +#define _PAGE_BIT_DIRTY xAMPRx_M_BIT +#define _PAGE_BIT_NOTGLOBAL xAMPRx_NG_BIT + +#define _PAGE_PRESENT xAMPRx_V +#define _PAGE_WP DAMPRx_WP +#define _PAGE_NOCACHE xAMPRx_C +#define _PAGE_SUPER xAMPRx_S +#define _PAGE_ACCESSED xAMPRx_RESERVED8 /* accessed if set */ +#define _PAGE_DIRTY xAMPRx_M +#define _PAGE_NOTGLOBAL xAMPRx_NG + +#define _PAGE_RESERVED_MASK (xAMPRx_RESERVED8 | xAMPRx_RESERVED13) + +#define _PAGE_FILE 0x002 /* set:pagecache unset:swap */ +#define _PAGE_PROTNONE 0x000 /* If not present */ + +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +#define __PGPROT_BASE \ + (_PAGE_PRESENT | xAMPRx_SS_16Kb | xAMPRx_D | _PAGE_NOTGLOBAL | _PAGE_ACCESSED) + +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) +#define PAGE_SHARED __pgprot(__PGPROT_BASE) +#define PAGE_COPY __pgprot(__PGPROT_BASE | _PAGE_WP) +#define PAGE_READONLY __pgprot(__PGPROT_BASE | _PAGE_WP) + +#define __PAGE_KERNEL (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY) +#define __PAGE_KERNEL_NOCACHE (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_NOCACHE) +#define __PAGE_KERNEL_RO (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_WP) + +#define MAKE_GLOBAL(x) __pgprot((x) & ~_PAGE_NOTGLOBAL) + +#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL) +#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO) +#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE) + +#define _PAGE_TABLE (_PAGE_PRESENT | xAMPRx_SS_16Kb) + +#ifndef __ASSEMBLY__ + +/* + * The FR451 can do execute protection by virtue of having separate TLB miss handlers for + * instruction access and for data access. However, we don't have enough reserved bits to say + * "execute only", so we don't bother. If you can read it, you can execute it and vice versa. + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY +#define __P101 PAGE_READONLY +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY +#define __S101 PAGE_READONLY +#define __S110 PAGE_SHARED +#define __S111 PAGE_SHARED + +/* + * Define this to warn about kernel memory accesses that are + * done without a 'access_ok(VERIFY_WRITE,..)' + */ +#undef TEST_ACCESS_OK + +#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) +#define pmd_bad(x) (pmd_val(x) & xAMPRx_SS) +#define pmd_clear(xp) do { __set_pmd(xp, 0); } while(0) + +#define pmd_page_vaddr(pmd) \ + ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + +#ifndef CONFIG_DISCONTIGMEM +#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) +#endif + +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_dirty(pte_t pte) { return (pte).pte & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return (pte).pte & _PAGE_ACCESSED; } +static inline int pte_write(pte_t pte) { return !((pte).pte & _PAGE_WP); } +static inline int pte_special(pte_t pte) { return 0; } + +static inline pte_t pte_mkclean(pte_t pte) { (pte).pte &= ~_PAGE_DIRTY; return pte; } +static inline pte_t pte_mkold(pte_t pte) { (pte).pte &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_wrprotect(pte_t pte) { (pte).pte |= _PAGE_WP; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { (pte).pte |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { (pte).pte |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { (pte).pte &= ~_PAGE_WP; return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) +{ + int i = test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep); + asm volatile("dcf %M0" :: "U"(*ptep)); + return i; +} + +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + unsigned long x = xchg(&ptep->pte, 0); + asm volatile("dcf %M0" :: "U"(*ptep)); + return __pte(x); +} + +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + set_bit(_PAGE_BIT_WP, ptep); + asm volatile("dcf %M0" :: "U"(*ptep)); +} + +/* + * Macro to mark a page protection value as "uncacheable" + */ +#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE)) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ + +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) +#define mk_pte_huge(entry) ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE) + +/* This takes a physical page address that is used by the remapping functions */ +#define mk_pte_phys(physpage, pgprot) pfn_pte((physpage) >> PAGE_SHIFT, pgprot) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte.pte &= _PAGE_CHG_MASK; + pte.pte |= pgprot_val(newprot); + return pte; +} + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) +#define pgd_index_k(addr) pgd_index(addr) + +/* Find an entry in the bottom-level page table.. */ +#define __pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +/* + * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] + * + * this macro returns the index of the entry in the pte page which would + * control the given virtual address + */ +#define pte_index(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) + +#if defined(CONFIG_HIGHPTE) +#define pte_offset_map(dir, address) \ + ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address)) +#define pte_offset_map_nested(dir, address) \ + ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address)) +#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) +#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1) +#else +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address)) +#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address)) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) +#endif + +/* + * Handle swap and file entries + * - the PTE is encoded in the following format: + * bit 0: Must be 0 (!_PAGE_PRESENT) + * bit 1: Type: 0 for swap, 1 for file (_PAGE_FILE) + * bits 2-7: Swap type + * bits 8-31: Swap offset + * bits 2-31: File pgoff + */ +#define __swp_type(x) (((x).val >> 2) & 0x1f) +#define __swp_offset(x) ((x).val >> 8) +#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 8) }) +#define __pte_to_swp_entry(_pte) ((swp_entry_t) { (_pte).pte }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +static inline int pte_file(pte_t pte) +{ + return pte.pte & _PAGE_FILE; +} + +#define PTE_FILE_MAX_BITS 29 + +#define pte_to_pgoff(PTE) ((PTE).pte >> 2) +#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +#define PageSkip(page) (0) +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define __HAVE_ARCH_PTE_SAME +#include + +/* + * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache + */ +static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) +{ + struct mm_struct *mm; + unsigned long ampr; + + mm = current->mm; + if (mm) { + pgd_t *pge = pgd_offset(mm, address); + pud_t *pue = pud_offset(pge, address); + pmd_t *pme = pmd_offset(pue, address); + + ampr = pme->ste[0] & 0xffffff00; + ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | + xAMPRx_V; + } else { + address = ULONG_MAX; + ampr = 0; + } + + asm volatile("movgs %0,scr0\n" + "movgs %0,scr1\n" + "movgs %1,dampr4\n" + "movgs %1,dampr5\n" + : + : "r"(address), "r"(ampr) + ); +} + +#ifdef CONFIG_PROC_FS +extern char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer); +#endif + +extern void __init pgtable_cache_init(void); + +#endif /* !__ASSEMBLY__ */ +#endif /* !CONFIG_MMU */ + +#ifndef __ASSEMBLY__ +extern void __init paging_init(void); +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_PGTABLE_H */ diff --git a/arch/frv/include/asm/poll.h b/arch/frv/include/asm/poll.h new file mode 100644 index 0000000..0d01479 --- /dev/null +++ b/arch/frv/include/asm/poll.h @@ -0,0 +1,12 @@ +#ifndef _ASM_POLL_H +#define _ASM_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 256 + +#include + +#undef POLLREMOVE + +#endif + diff --git a/arch/frv/include/asm/posix_types.h b/arch/frv/include/asm/posix_types.h new file mode 100644 index 0000000..a9f1f5b --- /dev/null +++ b/arch/frv/include/asm/posix_types.h @@ -0,0 +1,62 @@ +#ifndef _ASM_POSIX_TYPES_H +#define _ASM_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d))) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) */ + +#endif + diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h new file mode 100644 index 0000000..3744f2e --- /dev/null +++ b/arch/frv/include/asm/processor.h @@ -0,0 +1,153 @@ +/* processor.h: FRV processor definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_PROCESSOR_H +#define _ASM_PROCESSOR_H + +#include + +#ifndef __ASSEMBLY__ +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + */ +struct cpuinfo_frv { +#ifdef CONFIG_MMU + unsigned long *pgd_quick; + unsigned long *pte_quick; + unsigned long pgtable_cache_sz; +#endif +} __cacheline_aligned; + +extern struct cpuinfo_frv __nongprelbss boot_cpu_data; + +#define cpu_data (&boot_cpu_data) +#define current_cpu_data boot_cpu_data + +/* + * Bus types + */ +#define EISA_bus 0 +#define MCA_bus 0 + +struct thread_struct { + struct pt_regs *frame; /* [GR28] exception frame ptr for this thread */ + struct task_struct *curr; /* [GR29] current pointer for this thread */ + unsigned long sp; /* [GR1 ] kernel stack pointer */ + unsigned long fp; /* [GR2 ] kernel frame pointer */ + unsigned long lr; /* link register */ + unsigned long pc; /* program counter */ + unsigned long gr[12]; /* [GR16-GR27] */ + unsigned long sched_lr; /* LR from schedule() */ + + union { + struct pt_regs *frame0; /* top (user) stack frame */ + struct user_context *user; /* userspace context */ + }; +} __attribute__((aligned(8))); + +extern struct pt_regs *__kernel_frame0_ptr; +extern struct task_struct *__kernel_current_task; + +#endif + +#ifndef __ASSEMBLY__ +#define INIT_THREAD_FRAME0 \ + ((struct pt_regs *) \ + (sizeof(init_stack) + (unsigned long) init_stack - sizeof(struct user_context))) + +#define INIT_THREAD { \ + NULL, \ + (struct task_struct *) init_stack, \ + 0, 0, 0, 0, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ + 0, \ + { INIT_THREAD_FRAME0 }, \ +} + +/* + * do necessary setup to start up a newly executed thread. + * - need to discard the frame stacked by init() invoking the execve syscall + */ +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + __frame = __kernel_frame0_ptr; \ + __frame->pc = (_pc); \ + __frame->psr &= ~PSR_S; \ + __frame->sp = (_usp); \ +} while(0) + +extern void prepare_to_copy(struct task_struct *tsk); + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +extern asmlinkage int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); +extern asmlinkage void save_user_regs(struct user_context *target); +extern asmlinkage void *restore_user_regs(const struct user_context *target, ...); + +#define copy_segments(tsk, mm) do { } while (0) +#define release_segments(mm) do { } while (0) +#define forget_segments() do { } while (0) + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +/* + * Return saved PC of a blocked thread. + */ +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc) +#define KSTK_ESP(tsk) ((tsk)->thread.frame0->sp) + +/* Allocation and freeing of basic task resources. */ +extern struct task_struct *alloc_task_struct(void); +extern void free_task_struct(struct task_struct *p); + +#define cpu_relax() barrier() + +/* data cache prefetch */ +#define ARCH_HAS_PREFETCH +static inline void prefetch(const void *x) +{ + asm volatile("dcpl %0,gr0,#0" : : "r"(x)); +} + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_PROCESSOR_H */ diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h new file mode 100644 index 0000000..cf69340 --- /dev/null +++ b/arch/frv/include/asm/ptrace.h @@ -0,0 +1,83 @@ +/* ptrace.h: ptrace() relevant definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_PTRACE_H +#define _ASM_PTRACE_H + +#include +#ifdef __KERNEL__ +#include + +#define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0) +#endif + + +#define PT_PSR 0 +#define PT_ISR 1 +#define PT_CCR 2 +#define PT_CCCR 3 +#define PT_LR 4 +#define PT_LCR 5 +#define PT_PC 6 + +#define PT__STATUS 7 /* exception status */ +#define PT_SYSCALLNO 8 /* syscall number or -1 */ +#define PT_ORIG_GR8 9 /* saved GR8 for signal handling */ +#define PT_GNER0 10 +#define PT_GNER1 11 +#define PT_IACC0H 12 +#define PT_IACC0L 13 + +#define PT_GR(j) ( 14 + (j)) /* GRj for 0<=j<=63 */ +#define PT_FR(j) ( 78 + (j)) /* FRj for 0<=j<=63 */ +#define PT_FNER(j) (142 + (j)) /* FNERj for 0<=j<=1 */ +#define PT_MSR(j) (144 + (j)) /* MSRj for 0<=j<=2 */ +#define PT_ACC(j) (146 + (j)) /* ACCj for 0<=j<=7 */ +#define PT_ACCG(jklm) (154 + (jklm)) /* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */ +#define PT_FSR(j) (156 + (j)) /* FSRj for 0<=j<=0 */ +#define PT__GPEND 78 +#define PT__END 157 + +#define PT_TBR PT_GR(0) +#define PT_SP PT_GR(1) +#define PT_FP PT_GR(2) +#define PT_PREV_FRAME PT_GR(28) /* previous exception frame pointer (old gr28 value) */ +#define PT_CURR_TASK PT_GR(29) /* current task */ + + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +/* + * we dedicate GR28 to keeping a pointer to the current exception frame + * - gr28 is destroyed on entry to the kernel from userspace + */ +register struct pt_regs *__frame asm("gr28"); + +#define user_mode(regs) (!((regs)->psr & PSR_S)) +#define instruction_pointer(regs) ((regs)->pc) + +extern unsigned long user_stack(const struct pt_regs *); +extern void show_regs(struct pt_regs *); +#define profile_pc(regs) ((regs)->pc) +#endif + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_PTRACE_H */ diff --git a/arch/frv/include/asm/registers.h b/arch/frv/include/asm/registers.h new file mode 100644 index 0000000..9666119 --- /dev/null +++ b/arch/frv/include/asm/registers.h @@ -0,0 +1,232 @@ +/* registers.h: register frame declarations + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * notes: + * + * (1) that the members of all these structures are carefully aligned to permit + * usage of STD/STDF instructions + * + * (2) if you change these structures, you must change the code in + * arch/frvnommu/kernel/{break.S,entry.S,switch_to.S,gdb-stub.c} + * + * + * the kernel stack space block looks like this: + * + * +0x2000 +---------------------- + * | union { + * | struct frv_frame0 { + * | struct user_context { + * | struct user_int_regs + * | struct user_fpmedia_regs + * | } + * | struct frv_debug_regs + * | } + * | struct pt_regs [user exception] + * | } + * +---------------------- <-- __kernel_frame0_ptr (maybe GR28) + * | + * | kernel stack + * | + * |...................... + * | struct pt_regs [kernel exception] + * |...................... <-- __kernel_frame0_ptr (maybe GR28) + * | + * | kernel stack + * | + * |...................... <-- stack pointer (GR1) + * | + * | unused stack space + * | + * +---------------------- + * | struct thread_info + * +0x0000 +---------------------- <-- __current_thread_info (GR15); + * + * note that GR28 points to the current exception frame + */ + +#ifndef _ASM_REGISTERS_H +#define _ASM_REGISTERS_H + +#ifndef __ASSEMBLY__ +#define __OFFSET(X,N) ((X)+(N)*4) +#define __OFFSETC(X,N) xxxxxxxxxxxxxxxxxxxxxxxx +#else +#define __OFFSET(X,N) ((X)+(N)*4) +#define __OFFSETC(X,N) ((X)+(N)) +#endif + +/*****************************************************************************/ +/* + * Exception/Interrupt frame + * - held on kernel stack + * - 8-byte aligned on stack (old SP is saved in frame) + * - GR0 is fixed 0, so we don't save it + */ +#ifndef __ASSEMBLY__ + +struct pt_regs { + unsigned long psr; /* Processor Status Register */ + unsigned long isr; /* Integer Status Register */ + unsigned long ccr; /* Condition Code Register */ + unsigned long cccr; /* Condition Code for Conditional Insns Register */ + unsigned long lr; /* Link Register */ + unsigned long lcr; /* Loop Count Register */ + unsigned long pc; /* Program Counter Register */ + unsigned long __status; /* exception status */ + unsigned long syscallno; /* syscall number or -1 */ + unsigned long orig_gr8; /* original syscall arg #1 */ + unsigned long gner0; + unsigned long gner1; + unsigned long long iacc0; + unsigned long tbr; /* GR0 is fixed zero, so we use this for TBR */ + unsigned long sp; /* GR1: USP/KSP */ + unsigned long fp; /* GR2: FP */ + unsigned long gr3; + unsigned long gr4; + unsigned long gr5; + unsigned long gr6; + unsigned long gr7; /* syscall number */ + unsigned long gr8; /* 1st syscall param; syscall return */ + unsigned long gr9; /* 2nd syscall param */ + unsigned long gr10; /* 3rd syscall param */ + unsigned long gr11; /* 4th syscall param */ + unsigned long gr12; /* 5th syscall param */ + unsigned long gr13; /* 6th syscall param */ + unsigned long gr14; + unsigned long gr15; + unsigned long gr16; /* GP pointer */ + unsigned long gr17; /* small data */ + unsigned long gr18; /* PIC/PID */ + unsigned long gr19; + unsigned long gr20; + unsigned long gr21; + unsigned long gr22; + unsigned long gr23; + unsigned long gr24; + unsigned long gr25; + unsigned long gr26; + unsigned long gr27; + struct pt_regs *next_frame; /* GR28 - next exception frame */ + unsigned long gr29; /* GR29 - OS reserved */ + unsigned long gr30; /* GR30 - OS reserved */ + unsigned long gr31; /* GR31 - OS reserved */ +} __attribute__((aligned(8))); + +#endif + +#define REG__STATUS_STEP 0x00000001 /* - reenable single stepping on return */ +#define REG__STATUS_STEPPED 0x00000002 /* - single step caused exception */ +#define REG__STATUS_BROKE 0x00000004 /* - BREAK insn caused exception */ +#define REG__STATUS_SYSC_ENTRY 0x40000000 /* - T on syscall entry (ptrace.c only) */ +#define REG__STATUS_SYSC_EXIT 0x80000000 /* - T on syscall exit (ptrace.c only) */ + +#define REG_GR(R) __OFFSET(REG_GR0, (R)) + +#define REG_SP REG_GR(1) +#define REG_FP REG_GR(2) +#define REG_PREV_FRAME REG_GR(28) /* previous exception frame pointer (old gr28 value) */ +#define REG_CURR_TASK REG_GR(29) /* current task */ + +/*****************************************************************************/ +/* + * debugging registers + */ +#ifndef __ASSEMBLY__ + +struct frv_debug_regs +{ + unsigned long dcr; + unsigned long ibar[4] __attribute__((aligned(8))); + unsigned long dbar[4] __attribute__((aligned(8))); + unsigned long dbdr[4][4] __attribute__((aligned(8))); + unsigned long dbmr[4][4] __attribute__((aligned(8))); +} __attribute__((aligned(8))); + +#endif + +/*****************************************************************************/ +/* + * userspace registers + */ +#ifndef __ASSEMBLY__ + +struct user_int_regs +{ + /* integer registers + * - up to gr[31] mirror pt_regs + * - total size must be multiple of 8 bytes + */ + unsigned long psr; /* Processor Status Register */ + unsigned long isr; /* Integer Status Register */ + unsigned long ccr; /* Condition Code Register */ + unsigned long cccr; /* Condition Code for Conditional Insns Register */ + unsigned long lr; /* Link Register */ + unsigned long lcr; /* Loop Count Register */ + unsigned long pc; /* Program Counter Register */ + unsigned long __status; /* exception status */ + unsigned long syscallno; /* syscall number or -1 */ + unsigned long orig_gr8; /* original syscall arg #1 */ + unsigned long gner[2]; + unsigned long long iacc[1]; + + union { + unsigned long tbr; + unsigned long gr[64]; + }; +}; + +struct user_fpmedia_regs +{ + /* FP/Media registers */ + unsigned long fr[64]; + unsigned long fner[2]; + unsigned long msr[2]; + unsigned long acc[8]; + unsigned char accg[8]; + unsigned long fsr[1]; +}; + +struct user_context +{ + struct user_int_regs i; + struct user_fpmedia_regs f; + + /* we provide a context extension so that we can save the regs for CPUs that + * implement many more of Fujitsu's lavish register spec + */ + void *extension; +} __attribute__((aligned(8))); + +struct frv_frame0 { + union { + struct pt_regs regs; + struct user_context uc; + }; + + struct frv_debug_regs debug; + +} __attribute__((aligned(32))); + +#endif + +#define __INT_GR(R) __OFFSET(__INT_GR0, (R)) + +#define __FPMEDIA_FR(R) __OFFSET(__FPMEDIA_FR0, (R)) +#define __FPMEDIA_FNER(R) __OFFSET(__FPMEDIA_FNER0, (R)) +#define __FPMEDIA_MSR(R) __OFFSET(__FPMEDIA_MSR0, (R)) +#define __FPMEDIA_ACC(R) __OFFSET(__FPMEDIA_ACC0, (R)) +#define __FPMEDIA_ACCG(R) __OFFSETC(__FPMEDIA_ACCG0, (R)) +#define __FPMEDIA_FSR(R) __OFFSET(__FPMEDIA_FSR0, (R)) + +#define __THREAD_GR(R) __OFFSET(__THREAD_GR16, (R) - 16) + +#endif /* _ASM_REGISTERS_H */ diff --git a/arch/frv/include/asm/resource.h b/arch/frv/include/asm/resource.h new file mode 100644 index 0000000..5fc6054 --- /dev/null +++ b/arch/frv/include/asm/resource.h @@ -0,0 +1,7 @@ +#ifndef _ASM_RESOURCE_H +#define _ASM_RESOURCE_H + +#include + +#endif /* _ASM_RESOURCE_H */ + diff --git a/arch/frv/include/asm/scatterlist.h b/arch/frv/include/asm/scatterlist.h new file mode 100644 index 0000000..4bca8a2 --- /dev/null +++ b/arch/frv/include/asm/scatterlist.h @@ -0,0 +1,46 @@ +#ifndef _ASM_SCATTERLIST_H +#define _ASM_SCATTERLIST_H + +#include + +/* + * Drivers must set either ->address or (preferred) page and ->offset + * to indicate where data must be transferred to/from. + * + * Using page is recommended since it handles highmem data as well as + * low mem. ->address is restricted to data which has a virtual mapping, and + * it will go away in the future. Updating to page can be automated very + * easily -- something like + * + * sg->address = some_ptr; + * + * can be rewritten as + * + * sg_set_buf(sg, some_ptr, length); + * + * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens + */ +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; /* for highmem, page offset */ + + dma_addr_t dma_address; + unsigned int length; +}; + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0xffffffffUL) + +#endif /* !_ASM_SCATTERLIST_H */ diff --git a/arch/frv/include/asm/sections.h b/arch/frv/include/asm/sections.h new file mode 100644 index 0000000..17d0fb1 --- /dev/null +++ b/arch/frv/include/asm/sections.h @@ -0,0 +1,46 @@ +/* sections.h: linkage layout variables + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SECTIONS_H +#define _ASM_SECTIONS_H + +#ifndef __ASSEMBLY__ + +#include +#include + +#ifdef __KERNEL__ + +/* + * we don't want to put variables in the GP-REL section if they're not used very much - that would + * be waste since GP-REL addressing is limited to GP16+/-2048 + */ +#define __nongpreldata __attribute__((section(".data"))) +#define __nongprelbss __attribute__((section(".bss"))) + +/* + * linker symbols + */ +extern const void __kernel_image_start, __kernel_image_end, __page_offset; + +extern unsigned long __nongprelbss memory_start; +extern unsigned long __nongprelbss memory_end; +extern unsigned long __nongprelbss rom_length; + +/* determine if we're running from ROM */ +static inline int is_in_rom(unsigned long addr) +{ + return 0; /* default case: not in ROM */ +} + +#endif +#endif +#endif /* _ASM_SECTIONS_H */ diff --git a/arch/frv/include/asm/segment.h b/arch/frv/include/asm/segment.h new file mode 100644 index 0000000..e3616a6 --- /dev/null +++ b/arch/frv/include/asm/segment.h @@ -0,0 +1,45 @@ +/* segment.h: MMU segment settings + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SEGMENT_H +#define _ASM_SEGMENT_H + + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#define KERNEL_DS MAKE_MM_SEG(0xdfffffffUL) + +#ifdef CONFIG_MMU +#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) +#else +#define USER_DS KERNEL_DS +#endif + +#define get_ds() (KERNEL_DS) +#define get_fs() (__current_thread_info->addr_limit) +#define segment_eq(a,b) ((a).seg == (b).seg) +#define __kernel_ds_p() segment_eq(get_fs(), KERNEL_DS) +#define get_addr_limit() (get_fs().seg) + +#define set_fs(_x) \ +do { \ + __current_thread_info->addr_limit = (_x); \ +} while(0) + + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_SEGMENT_H */ diff --git a/arch/frv/include/asm/sembuf.h b/arch/frv/include/asm/sembuf.h new file mode 100644 index 0000000..164b127 --- /dev/null +++ b/arch/frv/include/asm/sembuf.h @@ -0,0 +1,26 @@ +#ifndef _ASM_SEMBUF_H +#define _ASM_SEMBUF_H + +/* + * The semid64_ds structure for FR-V architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SEMBUF_H */ + diff --git a/arch/frv/include/asm/serial-regs.h b/arch/frv/include/asm/serial-regs.h new file mode 100644 index 0000000..e1286bd --- /dev/null +++ b/arch/frv/include/asm/serial-regs.h @@ -0,0 +1,44 @@ +/* serial-regs.h: serial port registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SERIAL_REGS_H +#define _ASM_SERIAL_REGS_H + +#include +#include + +#define SERIAL_ICLK 33333333 /* the target serial input clock */ +#define UART0_BASE 0xfeff9c00 +#define UART1_BASE 0xfeff9c40 + +#define __get_UART0(R) ({ __reg(UART0_BASE + (R) * 8) >> 24; }) +#define __get_UART1(R) ({ __reg(UART1_BASE + (R) * 8) >> 24; }) +#define __set_UART0(R,V) do { __reg(UART0_BASE + (R) * 8) = (V) << 24; } while(0) +#define __set_UART1(R,V) do { __reg(UART1_BASE + (R) * 8) = (V) << 24; } while(0) + +#define __get_UART0_LSR() ({ __get_UART0(UART_LSR); }) +#define __get_UART1_LSR() ({ __get_UART1(UART_LSR); }) + +#define __set_UART0_IER(V) __set_UART0(UART_IER,(V)) +#define __set_UART1_IER(V) __set_UART1(UART_IER,(V)) + +/* serial prescaler select register */ +#define __get_UCPSR() ({ *(volatile unsigned long *)(0xfeff9c90); }) +#define __set_UCPSR(V) do { *(volatile unsigned long *)(0xfeff9c90) = (V); } while(0) +#define UCPSR_SELECT0 0x07000000 +#define UCPSR_SELECT1 0x38000000 + +/* serial prescaler base value register */ +#define __get_UCPVR() ({ *(volatile unsigned long *)(0xfeff9c98); mb(); }) +#define __set_UCPVR(V) do { *(volatile unsigned long *)(0xfeff9c98) = (V) << 24; mb(); } while(0) + + +#endif /* _ASM_SERIAL_REGS_H */ diff --git a/arch/frv/include/asm/serial.h b/arch/frv/include/asm/serial.h new file mode 100644 index 0000000..dbb8259 --- /dev/null +++ b/arch/frv/include/asm/serial.h @@ -0,0 +1,18 @@ +/* + * serial.h + * + * Copyright (C) 2003 Develer S.r.l. (http://www.develer.com/) + * Author: Bernardo Innocenti + * + * Based on linux/include/asm-i386/serial.h + */ +#include + +/* + * the base baud is derived from the clock speed and so is variable + */ +#define BASE_BAUD 0 + +#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF + +#define SERIAL_PORT_DFNS diff --git a/arch/frv/include/asm/setup.h b/arch/frv/include/asm/setup.h new file mode 100644 index 0000000..afd787c --- /dev/null +++ b/arch/frv/include/asm/setup.h @@ -0,0 +1,31 @@ +/* setup.h: setup stuff + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SETUP_H +#define _ASM_SETUP_H + +#define COMMAND_LINE_SIZE 512 + +#ifdef __KERNEL__ + +#include + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MMU +extern unsigned long __initdata num_mappedpages; +#endif + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SETUP_H */ diff --git a/arch/frv/include/asm/shmbuf.h b/arch/frv/include/asm/shmbuf.h new file mode 100644 index 0000000..4c6e711 --- /dev/null +++ b/arch/frv/include/asm/shmbuf.h @@ -0,0 +1,43 @@ +#ifndef _ASM_SHMBUF_H +#define _ASM_SHMBUF_H + +/* + * The shmid64_ds structure for FR-V architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SHMBUF_H */ + diff --git a/arch/frv/include/asm/shmparam.h b/arch/frv/include/asm/shmparam.h new file mode 100644 index 0000000..ab71100 --- /dev/null +++ b/arch/frv/include/asm/shmparam.h @@ -0,0 +1,7 @@ +#ifndef _ASM_SHMPARAM_H +#define _ASM_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_SHMPARAM_H */ + diff --git a/arch/frv/include/asm/sigcontext.h b/arch/frv/include/asm/sigcontext.h new file mode 100644 index 0000000..3b263f3 --- /dev/null +++ b/arch/frv/include/asm/sigcontext.h @@ -0,0 +1,26 @@ +/* sigcontext.h: FRV signal context + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_SIGCONTEXT_H +#define _ASM_SIGCONTEXT_H + +#include + +/* + * Signal context structure - contains all info to do with the state + * before the signal handler was invoked. Note: only add new entries + * to the end of the structure. + */ +struct sigcontext { + struct user_context sc_context; + unsigned long sc_oldmask; /* old sigmask */ +} __attribute__((aligned(8))); + +#endif diff --git a/arch/frv/include/asm/siginfo.h b/arch/frv/include/asm/siginfo.h new file mode 100644 index 0000000..d3fd1ca --- /dev/null +++ b/arch/frv/include/asm/siginfo.h @@ -0,0 +1,12 @@ +#ifndef _ASM_SIGINFO_H +#define _ASM_SIGINFO_H + +#include +#include + +#define FPE_MDAOVF (__SI_FAULT|9) /* media overflow */ +#undef NSIGFPE +#define NSIGFPE 9 + +#endif + diff --git a/arch/frv/include/asm/signal.h b/arch/frv/include/asm/signal.h new file mode 100644 index 0000000..2079197 --- /dev/null +++ b/arch/frv/include/asm/signal.h @@ -0,0 +1,161 @@ +#ifndef _ASM_SIGNAL_H +#define _ASM_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#ifdef __KERNEL__ + +#include +#undef __HAVE_ARCH_SIG_BITOPS + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SIGNAL_H */ diff --git a/arch/frv/include/asm/smp.h b/arch/frv/include/asm/smp.h new file mode 100644 index 0000000..38349ec --- /dev/null +++ b/arch/frv/include/asm/smp.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SMP_H +#define __ASM_SMP_H + + +#ifdef CONFIG_SMP +#error SMP not supported +#endif + +#endif diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h new file mode 100644 index 0000000..57c3d40 --- /dev/null +++ b/arch/frv/include/asm/socket.h @@ -0,0 +1,61 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#endif /* _ASM_SOCKET_H */ + diff --git a/arch/frv/include/asm/sockios.h b/arch/frv/include/asm/sockios.h new file mode 100644 index 0000000..5dbdd13 --- /dev/null +++ b/arch/frv/include/asm/sockios.h @@ -0,0 +1,14 @@ +#ifndef _ASM_SOCKIOS__ +#define _ASM_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_SOCKIOS__ */ + diff --git a/arch/frv/include/asm/spinlock.h b/arch/frv/include/asm/spinlock.h new file mode 100644 index 0000000..fe385f4 --- /dev/null +++ b/arch/frv/include/asm/spinlock.h @@ -0,0 +1,17 @@ +/* spinlock.h: spinlocks for FR-V + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SPINLOCK_H +#define _ASM_SPINLOCK_H + +#error no spinlocks for FR-V yet + +#endif /* _ASM_SPINLOCK_H */ diff --git a/arch/frv/include/asm/spr-regs.h b/arch/frv/include/asm/spr-regs.h new file mode 100644 index 0000000..01e6af5 --- /dev/null +++ b/arch/frv/include/asm/spr-regs.h @@ -0,0 +1,416 @@ +/* spr-regs.h: special-purpose registers on the FRV + * + * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SPR_REGS_H +#define _ASM_SPR_REGS_H + +/* + * PSR - Processor Status Register + */ +#define PSR_ET 0x00000001 /* enable interrupts/exceptions flag */ +#define PSR_PS 0x00000002 /* previous supervisor mode flag */ +#define PSR_S 0x00000004 /* supervisor mode flag */ +#define PSR_PIL 0x00000078 /* processor external interrupt level */ +#define PSR_PIL_0 0x00000000 /* - no interrupt in progress */ +#define PSR_PIL_13 0x00000068 /* - debugging only */ +#define PSR_PIL_14 0x00000070 /* - debugging in progress */ +#define PSR_PIL_15 0x00000078 /* - NMI in progress */ +#define PSR_EM 0x00000080 /* enable media operation */ +#define PSR_EF 0x00000100 /* enable FPU operation */ +#define PSR_BE 0x00001000 /* endianness mode */ +#define PSR_BE_LE 0x00000000 /* - little endian mode */ +#define PSR_BE_BE 0x00001000 /* - big endian mode */ +#define PSR_CM 0x00002000 /* conditional mode */ +#define PSR_NEM 0x00004000 /* non-excepting mode */ +#define PSR_ICE 0x00010000 /* in-circuit emulation mode */ +#define PSR_VERSION_SHIFT 24 /* CPU silicon ID */ +#define PSR_IMPLE_SHIFT 28 /* CPU core ID */ + +#define PSR_VERSION(psr) (((psr) >> PSR_VERSION_SHIFT) & 0xf) +#define PSR_IMPLE(psr) (((psr) >> PSR_IMPLE_SHIFT) & 0xf) + +#define PSR_IMPLE_FR401 0x2 +#define PSR_VERSION_FR401_MB93401 0x0 +#define PSR_VERSION_FR401_MB93401A 0x1 +#define PSR_VERSION_FR401_MB93403 0x2 + +#define PSR_IMPLE_FR405 0x4 +#define PSR_VERSION_FR405_MB93405 0x0 + +#define PSR_IMPLE_FR451 0x5 +#define PSR_VERSION_FR451_MB93451 0x0 + +#define PSR_IMPLE_FR501 0x1 +#define PSR_VERSION_FR501_MB93501 0x1 +#define PSR_VERSION_FR501_MB93501A 0x2 + +#define PSR_IMPLE_FR551 0x3 +#define PSR_VERSION_FR551_MB93555 0x1 + +#define __get_PSR() ({ unsigned long x; asm volatile("movsg psr,%0" : "=r"(x)); x; }) +#define __set_PSR(V) do { asm volatile("movgs %0,psr" : : "r"(V)); } while(0) + +/* + * TBR - Trap Base Register + */ +#define TBR_TT 0x00000ff0 +#define TBR_TT_INSTR_MMU_MISS (0x01 << 4) +#define TBR_TT_INSTR_ACC_ERROR (0x02 << 4) +#define TBR_TT_INSTR_ACC_EXCEP (0x03 << 4) +#define TBR_TT_PRIV_INSTR (0x06 << 4) +#define TBR_TT_ILLEGAL_INSTR (0x07 << 4) +#define TBR_TT_FP_EXCEPTION (0x0d << 4) +#define TBR_TT_MP_EXCEPTION (0x0e << 4) +#define TBR_TT_DATA_ACC_ERROR (0x11 << 4) +#define TBR_TT_DATA_MMU_MISS (0x12 << 4) +#define TBR_TT_DATA_ACC_EXCEP (0x13 << 4) +#define TBR_TT_DATA_STR_ERROR (0x14 << 4) +#define TBR_TT_DIVISION_EXCEP (0x17 << 4) +#define TBR_TT_COMMIT_EXCEP (0x19 << 4) +#define TBR_TT_INSTR_TLB_MISS (0x1a << 4) +#define TBR_TT_DATA_TLB_MISS (0x1b << 4) +#define TBR_TT_DATA_DAT_EXCEP (0x1d << 4) +#define TBR_TT_DECREMENT_TIMER (0x1f << 4) +#define TBR_TT_COMPOUND_EXCEP (0x20 << 4) +#define TBR_TT_INTERRUPT_1 (0x21 << 4) +#define TBR_TT_INTERRUPT_2 (0x22 << 4) +#define TBR_TT_INTERRUPT_3 (0x23 << 4) +#define TBR_TT_INTERRUPT_4 (0x24 << 4) +#define TBR_TT_INTERRUPT_5 (0x25 << 4) +#define TBR_TT_INTERRUPT_6 (0x26 << 4) +#define TBR_TT_INTERRUPT_7 (0x27 << 4) +#define TBR_TT_INTERRUPT_8 (0x28 << 4) +#define TBR_TT_INTERRUPT_9 (0x29 << 4) +#define TBR_TT_INTERRUPT_10 (0x2a << 4) +#define TBR_TT_INTERRUPT_11 (0x2b << 4) +#define TBR_TT_INTERRUPT_12 (0x2c << 4) +#define TBR_TT_INTERRUPT_13 (0x2d << 4) +#define TBR_TT_INTERRUPT_14 (0x2e << 4) +#define TBR_TT_INTERRUPT_15 (0x2f << 4) +#define TBR_TT_TRAP0 (0x80 << 4) +#define TBR_TT_TRAP1 (0x81 << 4) +#define TBR_TT_TRAP2 (0x82 << 4) +#define TBR_TT_TRAP3 (0x83 << 4) +#define TBR_TT_TRAP120 (0xf8 << 4) +#define TBR_TT_TRAP121 (0xf9 << 4) +#define TBR_TT_TRAP122 (0xfa << 4) +#define TBR_TT_TRAP123 (0xfb << 4) +#define TBR_TT_TRAP124 (0xfc << 4) +#define TBR_TT_TRAP125 (0xfd << 4) +#define TBR_TT_TRAP126 (0xfe << 4) +#define TBR_TT_BREAK (0xff << 4) + +#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120 +#define TBR_TT_ATOMIC_XCHG32 TBR_TT_TRAP121 +#define TBR_TT_ATOMIC_XOR TBR_TT_TRAP122 +#define TBR_TT_ATOMIC_OR TBR_TT_TRAP123 +#define TBR_TT_ATOMIC_AND TBR_TT_TRAP124 +#define TBR_TT_ATOMIC_SUB TBR_TT_TRAP125 +#define TBR_TT_ATOMIC_ADD TBR_TT_TRAP126 + +#define __get_TBR() ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; }) + +/* + * HSR0 - Hardware Status Register 0 + */ +#define HSR0_PDM 0x00000007 /* power down mode */ +#define HSR0_PDM_NORMAL 0x00000000 /* - normal mode */ +#define HSR0_PDM_CORE_SLEEP 0x00000001 /* - CPU core sleep mode */ +#define HSR0_PDM_BUS_SLEEP 0x00000003 /* - bus sleep mode */ +#define HSR0_PDM_PLL_RUN 0x00000005 /* - PLL run */ +#define HSR0_PDM_PLL_STOP 0x00000007 /* - PLL stop */ +#define HSR0_GRLE 0x00000040 /* GR lower register set enable */ +#define HSR0_GRHE 0x00000080 /* GR higher register set enable */ +#define HSR0_FRLE 0x00000100 /* FR lower register set enable */ +#define HSR0_FRHE 0x00000200 /* FR higher register set enable */ +#define HSR0_GRN 0x00000400 /* GR quantity */ +#define HSR0_GRN_64 0x00000000 /* - 64 GR registers */ +#define HSR0_GRN_32 0x00000400 /* - 32 GR registers */ +#define HSR0_FRN 0x00000800 /* FR quantity */ +#define HSR0_FRN_64 0x00000000 /* - 64 FR registers */ +#define HSR0_FRN_32 0x00000800 /* - 32 FR registers */ +#define HSR0_SA 0x00001000 /* start address (RAMBOOT#) */ +#define HSR0_ETMI 0x00008000 /* enable TIMERI (64-bit up timer) */ +#define HSR0_ETMD 0x00004000 /* enable TIMERD (32-bit down timer) */ +#define HSR0_PEDAT 0x00010000 /* previous DAT mode */ +#define HSR0_XEDAT 0x00020000 /* exception DAT mode */ +#define HSR0_EDAT 0x00080000 /* enable DAT mode */ +#define HSR0_RME 0x00400000 /* enable RAM mode */ +#define HSR0_EMEM 0x00800000 /* enable MMU_Miss mask */ +#define HSR0_EXMMU 0x01000000 /* enable extended MMU mode */ +#define HSR0_EDMMU 0x02000000 /* enable data MMU */ +#define HSR0_EIMMU 0x04000000 /* enable instruction MMU */ +#define HSR0_CBM 0x08000000 /* copy back mode */ +#define HSR0_CBM_WRITE_THRU 0x00000000 /* - write through */ +#define HSR0_CBM_COPY_BACK 0x08000000 /* - copy back */ +#define HSR0_NWA 0x10000000 /* no write allocate */ +#define HSR0_DCE 0x40000000 /* data cache enable */ +#define HSR0_ICE 0x80000000 /* instruction cache enable */ + +#define __get_HSR(R) ({ unsigned long x; asm volatile("movsg hsr"#R",%0" : "=r"(x)); x; }) +#define __set_HSR(R,V) do { asm volatile("movgs %0,hsr"#R : : "r"(V)); } while(0) + +/* + * CCR - Condition Codes Register + */ +#define CCR_FCC0 0x0000000f /* FP/Media condition 0 (fcc0 reg) */ +#define CCR_FCC1 0x000000f0 /* FP/Media condition 1 (fcc1 reg) */ +#define CCR_FCC2 0x00000f00 /* FP/Media condition 2 (fcc2 reg) */ +#define CCR_FCC3 0x0000f000 /* FP/Media condition 3 (fcc3 reg) */ +#define CCR_ICC0 0x000f0000 /* Integer condition 0 (icc0 reg) */ +#define CCR_ICC0_C 0x00010000 /* - Carry flag */ +#define CCR_ICC0_V 0x00020000 /* - Overflow flag */ +#define CCR_ICC0_Z 0x00040000 /* - Zero flag */ +#define CCR_ICC0_N 0x00080000 /* - Negative flag */ +#define CCR_ICC1 0x00f00000 /* Integer condition 1 (icc1 reg) */ +#define CCR_ICC2 0x0f000000 /* Integer condition 2 (icc2 reg) */ +#define CCR_ICC3 0xf0000000 /* Integer condition 3 (icc3 reg) */ + +/* + * CCCR - Condition Codes for Conditional Instructions Register + */ +#define CCCR_CC0 0x00000003 /* condition 0 (cc0 reg) */ +#define CCCR_CC0_FALSE 0x00000002 /* - condition is false */ +#define CCCR_CC0_TRUE 0x00000003 /* - condition is true */ +#define CCCR_CC1 0x0000000c /* condition 1 (cc1 reg) */ +#define CCCR_CC2 0x00000030 /* condition 2 (cc2 reg) */ +#define CCCR_CC3 0x000000c0 /* condition 3 (cc3 reg) */ +#define CCCR_CC4 0x00000300 /* condition 4 (cc4 reg) */ +#define CCCR_CC5 0x00000c00 /* condition 5 (cc5 reg) */ +#define CCCR_CC6 0x00003000 /* condition 6 (cc6 reg) */ +#define CCCR_CC7 0x0000c000 /* condition 7 (cc7 reg) */ + +/* + * ISR - Integer Status Register + */ +#define ISR_EMAM 0x00000001 /* memory misaligned access handling */ +#define ISR_EMAM_EXCEPTION 0x00000000 /* - generate exception */ +#define ISR_EMAM_FUDGE 0x00000001 /* - mask out invalid address bits */ +#define ISR_AEXC 0x00000004 /* accrued [overflow] exception */ +#define ISR_DTT 0x00000018 /* division type trap */ +#define ISR_DTT_IGNORE 0x00000000 /* - ignore division error */ +#define ISR_DTT_DIVBYZERO 0x00000008 /* - generate exception */ +#define ISR_DTT_OVERFLOW 0x00000010 /* - record overflow */ +#define ISR_EDE 0x00000020 /* enable division exception */ +#define ISR_PLI 0x20000000 /* pre-load instruction information */ +#define ISR_QI 0x80000000 /* quad data implementation information */ + +/* + * EPCR0 - Exception PC Register + */ +#define EPCR0_V 0x00000001 /* register content validity indicator */ +#define EPCR0_PC 0xfffffffc /* faulting instruction address */ + +/* + * ESR0/14/15 - Exception Status Register + */ +#define ESRx_VALID 0x00000001 /* register content validity indicator */ +#define ESRx_EC 0x0000003e /* exception type */ +#define ESRx_EC_DATA_STORE 0x00000000 /* - data_store_error */ +#define ESRx_EC_INSN_ACCESS 0x00000006 /* - instruction_access_error */ +#define ESRx_EC_PRIV_INSN 0x00000008 /* - privileged_instruction */ +#define ESRx_EC_ILL_INSN 0x0000000a /* - illegal_instruction */ +#define ESRx_EC_MP_EXCEP 0x0000001c /* - mp_exception */ +#define ESRx_EC_DATA_ACCESS 0x00000020 /* - data_access_error */ +#define ESRx_EC_DIVISION 0x00000026 /* - division_exception */ +#define ESRx_EC_ITLB_MISS 0x00000034 /* - instruction_access_TLB_miss */ +#define ESRx_EC_DTLB_MISS 0x00000036 /* - data_access_TLB_miss */ +#define ESRx_EC_DATA_ACCESS_DAT 0x0000003a /* - data_access_DAT_exception */ + +#define ESR0_IAEC 0x00000100 /* info for instruction-access-exception */ +#define ESR0_IAEC_RESV 0x00000000 /* - reserved */ +#define ESR0_IAEC_PROT_VIOL 0x00000100 /* - protection violation */ + +#define ESR0_ATXC 0x00f00000 /* address translation exception code */ +#define ESR0_ATXC_MMU_MISS 0x00000000 /* - MMU miss exception and more (?) */ +#define ESR0_ATXC_MULTI_DAT 0x00800000 /* - multiple DAT entry hit */ +#define ESR0_ATXC_MULTI_SAT 0x00900000 /* - multiple SAT entry hit */ +#define ESR0_ATXC_AMRTLB_MISS 0x00a00000 /* - MMU/TLB miss exception */ +#define ESR0_ATXC_PRIV_EXCEP 0x00c00000 /* - privilege protection fault */ +#define ESR0_ATXC_WP_EXCEP 0x00d00000 /* - write protection fault */ + +#define ESR0_EAV 0x00000800 /* true if EAR0 register valid */ +#define ESR15_EAV 0x00000800 /* true if EAR15 register valid */ + +/* + * ESFR1 - Exception Status Valid Flag Register + */ +#define ESFR1_ESR0 0x00000001 /* true if ESR0 is valid */ +#define ESFR1_ESR14 0x00004000 /* true if ESR14 is valid */ +#define ESFR1_ESR15 0x00008000 /* true if ESR15 is valid */ + +/* + * MSR - Media Status Register + */ +#define MSR0_AOVF 0x00000001 /* overflow exception accrued */ +#define MSRx_OVF 0x00000002 /* overflow exception detected */ +#define MSRx_SIE 0x0000003c /* last SIMD instruction exception detected */ +#define MSRx_SIE_NONE 0x00000000 /* - none detected */ +#define MSRx_SIE_FRkHI_ACCk 0x00000020 /* - exception at FRkHI or ACCk */ +#define MSRx_SIE_FRkLO_ACCk1 0x00000010 /* - exception at FRkLO or ACCk+1 */ +#define MSRx_SIE_FRk1HI_ACCk2 0x00000008 /* - exception at FRk+1HI or ACCk+2 */ +#define MSRx_SIE_FRk1LO_ACCk3 0x00000004 /* - exception at FRk+1LO or ACCk+3 */ +#define MSR0_MTT 0x00007000 /* type of last media trap detected */ +#define MSR0_MTT_NONE 0x00000000 /* - none detected */ +#define MSR0_MTT_OVERFLOW 0x00001000 /* - overflow detected */ +#define MSR0_HI 0x00c00000 /* hardware implementation */ +#define MSR0_HI_ROUNDING 0x00000000 /* - rounding mode */ +#define MSR0_HI_NONROUNDING 0x00c00000 /* - non-rounding mode */ +#define MSR0_EMCI 0x01000000 /* enable media custom instructions */ +#define MSR0_SRDAV 0x10000000 /* select rounding mode of MAVEH */ +#define MSR0_SRDAV_RDAV 0x00000000 /* - controlled by MSR.RDAV */ +#define MSR0_SRDAV_RD 0x10000000 /* - controlled by MSR.RD */ +#define MSR0_RDAV 0x20000000 /* rounding mode of MAVEH */ +#define MSR0_RDAV_NEAREST_MI 0x00000000 /* - round to nearest minus */ +#define MSR0_RDAV_NEAREST_PL 0x20000000 /* - round to nearest plus */ +#define MSR0_RD 0xc0000000 /* rounding mode */ +#define MSR0_RD_NEAREST 0x00000000 /* - nearest */ +#define MSR0_RD_ZERO 0x40000000 /* - zero */ +#define MSR0_RD_POS_INF 0x80000000 /* - postive infinity */ +#define MSR0_RD_NEG_INF 0xc0000000 /* - negative infinity */ + +/* + * IAMPR0-7 - Instruction Address Mapping Register + * DAMPR0-7 - Data Address Mapping Register + */ +#define xAMPRx_V 0x00000001 /* register content validity indicator */ +#define DAMPRx_WP 0x00000002 /* write protect */ +#define DAMPRx_WP_RW 0x00000000 /* - read/write */ +#define DAMPRx_WP_RO 0x00000002 /* - read-only */ +#define xAMPRx_C 0x00000004 /* cached/uncached */ +#define xAMPRx_C_CACHED 0x00000000 /* - cached */ +#define xAMPRx_C_UNCACHED 0x00000004 /* - uncached */ +#define xAMPRx_S 0x00000008 /* supervisor only */ +#define xAMPRx_S_USER 0x00000000 /* - userspace can access */ +#define xAMPRx_S_KERNEL 0x00000008 /* - kernel only */ +#define xAMPRx_SS 0x000000f0 /* segment size */ +#define xAMPRx_SS_16Kb 0x00000000 /* - 16 kilobytes */ +#define xAMPRx_SS_64Kb 0x00000010 /* - 64 kilobytes */ +#define xAMPRx_SS_256Kb 0x00000020 /* - 256 kilobytes */ +#define xAMPRx_SS_1Mb 0x00000030 /* - 1 megabyte */ +#define xAMPRx_SS_2Mb 0x00000040 /* - 2 megabytes */ +#define xAMPRx_SS_4Mb 0x00000050 /* - 4 megabytes */ +#define xAMPRx_SS_8Mb 0x00000060 /* - 8 megabytes */ +#define xAMPRx_SS_16Mb 0x00000070 /* - 16 megabytes */ +#define xAMPRx_SS_32Mb 0x00000080 /* - 32 megabytes */ +#define xAMPRx_SS_64Mb 0x00000090 /* - 64 megabytes */ +#define xAMPRx_SS_128Mb 0x000000a0 /* - 128 megabytes */ +#define xAMPRx_SS_256Mb 0x000000b0 /* - 256 megabytes */ +#define xAMPRx_SS_512Mb 0x000000c0 /* - 512 megabytes */ +#define xAMPRx_RESERVED8 0x00000100 /* reserved bit */ +#define xAMPRx_NG 0x00000200 /* non-global */ +#define xAMPRx_L 0x00000400 /* locked */ +#define xAMPRx_M 0x00000800 /* modified */ +#define xAMPRx_D 0x00001000 /* DAT entry */ +#define xAMPRx_RESERVED13 0x00002000 /* reserved bit */ +#define xAMPRx_PPFN 0xfff00000 /* physical page frame number */ + +#define xAMPRx_V_BIT 0 +#define DAMPRx_WP_BIT 1 +#define xAMPRx_C_BIT 2 +#define xAMPRx_S_BIT 3 +#define xAMPRx_RESERVED8_BIT 8 +#define xAMPRx_NG_BIT 9 +#define xAMPRx_L_BIT 10 +#define xAMPRx_M_BIT 11 +#define xAMPRx_D_BIT 12 +#define xAMPRx_RESERVED13_BIT 13 + +#define __get_IAMPR(R) ({ unsigned long x; asm volatile("movsg iampr"#R",%0" : "=r"(x)); x; }) +#define __get_DAMPR(R) ({ unsigned long x; asm volatile("movsg dampr"#R",%0" : "=r"(x)); x; }) + +#define __get_IAMLR(R) ({ unsigned long x; asm volatile("movsg iamlr"#R",%0" : "=r"(x)); x; }) +#define __get_DAMLR(R) ({ unsigned long x; asm volatile("movsg damlr"#R",%0" : "=r"(x)); x; }) + +#define __set_IAMPR(R,V) do { asm volatile("movgs %0,iampr"#R : : "r"(V)); } while(0) +#define __set_DAMPR(R,V) do { asm volatile("movgs %0,dampr"#R : : "r"(V)); } while(0) + +#define __set_IAMLR(R,V) do { asm volatile("movgs %0,iamlr"#R : : "r"(V)); } while(0) +#define __set_DAMLR(R,V) do { asm volatile("movgs %0,damlr"#R : : "r"(V)); } while(0) + +#define save_dampr(R, _dampr) \ +do { \ + asm volatile("movsg dampr"R",%0" : "=r"(_dampr)); \ +} while(0) + +#define restore_dampr(R, _dampr) \ +do { \ + asm volatile("movgs %0,dampr"R :: "r"(_dampr)); \ +} while(0) + +/* + * AMCR - Address Mapping Control Register + */ +#define AMCR_IAMRN 0x000000ff /* quantity of IAMPR registers */ +#define AMCR_DAMRN 0x0000ff00 /* quantity of DAMPR registers */ + +/* + * TTBR - Address Translation Table Base Register + */ +#define __get_TTBR() ({ unsigned long x; asm volatile("movsg ttbr,%0" : "=r"(x)); x; }) + +/* + * TPXR - TLB Probe Extend Register + */ +#define TPXR_E 0x00000001 +#define TPXR_LMAX_SHIFT 20 +#define TPXR_LMAX_SMASK 0xf +#define TPXR_WMAX_SHIFT 24 +#define TPXR_WMAX_SMASK 0xf +#define TPXR_WAY_SHIFT 28 +#define TPXR_WAY_SMASK 0xf + +/* + * DCR - Debug Control Register + */ +#define DCR_IBCE3 0x00000001 /* break on conditional insn pointed to by IBAR3 */ +#define DCR_IBE3 0x00000002 /* break on insn pointed to by IBAR3 */ +#define DCR_IBCE1 0x00000004 /* break on conditional insn pointed to by IBAR2 */ +#define DCR_IBE1 0x00000008 /* break on insn pointed to by IBAR2 */ +#define DCR_IBCE2 0x00000010 /* break on conditional insn pointed to by IBAR1 */ +#define DCR_IBE2 0x00000020 /* break on insn pointed to by IBAR1 */ +#define DCR_IBCE0 0x00000040 /* break on conditional insn pointed to by IBAR0 */ +#define DCR_IBE0 0x00000080 /* break on insn pointed to by IBAR0 */ + +#define DCR_DDBE1 0x00004000 /* use DBDR1x when checking DBAR1 */ +#define DCR_DWBE1 0x00008000 /* break on store to address in DBAR1/DBMR1x */ +#define DCR_DRBE1 0x00010000 /* break on load from address in DBAR1/DBMR1x */ +#define DCR_DDBE0 0x00020000 /* use DBDR0x when checking DBAR0 */ +#define DCR_DWBE0 0x00040000 /* break on store to address in DBAR0/DBMR0x */ +#define DCR_DRBE0 0x00080000 /* break on load from address in DBAR0/DBMR0x */ + +#define DCR_EIM 0x0c000000 /* external interrupt disable */ +#define DCR_IBM 0x10000000 /* instruction break disable */ +#define DCR_SE 0x20000000 /* single step enable */ +#define DCR_EBE 0x40000000 /* exception break enable */ + +/* + * BRR - Break Interrupt Request Register + */ +#define BRR_ST 0x00000001 /* single-step detected */ +#define BRR_SB 0x00000002 /* break instruction detected */ +#define BRR_BB 0x00000004 /* branch with hint detected */ +#define BRR_CBB 0x00000008 /* branch to LR detected */ +#define BRR_IBx 0x000000f0 /* hardware breakpoint detected */ +#define BRR_DBx 0x00000f00 /* hardware watchpoint detected */ +#define BRR_DBNEx 0x0000f000 /* ? */ +#define BRR_EBTT 0x00ff0000 /* trap type of exception break */ +#define BRR_TB 0x10000000 /* external break request detected */ +#define BRR_CB 0x20000000 /* ICE break command detected */ +#define BRR_EB 0x40000000 /* exception break detected */ + +/* + * BPSR - Break PSR Save Register + */ +#define BPSR_BET 0x00000001 /* former PSR.ET */ +#define BPSR_BS 0x00001000 /* former PSR.S */ + +#endif /* _ASM_SPR_REGS_H */ diff --git a/arch/frv/include/asm/stat.h b/arch/frv/include/asm/stat.h new file mode 100644 index 0000000..ce56de9 --- /dev/null +++ b/arch/frv/include/asm/stat.h @@ -0,0 +1,100 @@ +#ifndef _ASM_STAT_H +#define _ASM_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +/* This matches struct stat in uClibc/glibc. */ +struct stat { + unsigned char __pad1[6]; + unsigned short st_dev; + + unsigned long __pad2; + unsigned long st_ino; + + unsigned short __pad3; + unsigned short st_mode; + unsigned short __pad4; + unsigned short st_nlink; + + unsigned short __pad5; + unsigned short st_uid; + unsigned short __pad6; + unsigned short st_gid; + + unsigned char __pad7[6]; + unsigned short st_rdev; + + unsigned long __pad8; + unsigned long st_size; + + unsigned long __pad9; /* align 64-bit st_blocks to 2-word */ + unsigned long st_blksize; + + unsigned long __pad10; /* future possible st_blocks high bits */ + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long __unused1; + unsigned long st_atime; + + unsigned long __unused2; + unsigned long st_mtime; + + unsigned long __unused3; + unsigned long st_ctime; + + unsigned long long __unused4; +}; + +/* This matches struct stat64 in uClibc/glibc. The layout is exactly + the same as that of struct stat above, with 64-bit types taking up + space that was formerly used by padding. stat syscalls are still + different from stat64, though, in that the former tests for + overflow. */ +struct stat64 { + unsigned char __pad1[6]; + unsigned short st_dev; + + unsigned long long st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned char __pad2[6]; + unsigned short st_rdev; + + long long st_size; + + unsigned long __pad3; /* align 64-bit st_blocks to 2-word */ + unsigned long st_blksize; + + unsigned long __pad4; /* future possible st_blocks high bits */ + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime_nsec; + unsigned long st_atime; + + unsigned int st_mtime_nsec; + unsigned long st_mtime; + + unsigned long st_ctime_nsec; + unsigned long st_ctime; + + unsigned long long __unused4; +}; + +#endif /* _ASM_STAT_H */ diff --git a/arch/frv/include/asm/statfs.h b/arch/frv/include/asm/statfs.h new file mode 100644 index 0000000..741f586 --- /dev/null +++ b/arch/frv/include/asm/statfs.h @@ -0,0 +1,7 @@ +#ifndef _ASM_STATFS_H +#define _ASM_STATFS_H + +#include + +#endif /* _ASM_STATFS_H */ + diff --git a/arch/frv/include/asm/string.h b/arch/frv/include/asm/string.h new file mode 100644 index 0000000..5ed310f --- /dev/null +++ b/arch/frv/include/asm/string.h @@ -0,0 +1,51 @@ +/* string.h: FRV string handling + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_STRING_H_ +#define _ASM_STRING_H_ + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 + +extern void *memset(void *, int, __kernel_size_t); +extern void *memcpy(void *, const void *, __kernel_size_t); + +#else /* KERNEL */ + +/* + * let user libraries deal with these, + * IMHO the kernel has no place defining these functions for user apps + */ + +#define __HAVE_ARCH_STRCPY 1 +#define __HAVE_ARCH_STRNCPY 1 +#define __HAVE_ARCH_STRCAT 1 +#define __HAVE_ARCH_STRNCAT 1 +#define __HAVE_ARCH_STRCMP 1 +#define __HAVE_ARCH_STRNCMP 1 +#define __HAVE_ARCH_STRNICMP 1 +#define __HAVE_ARCH_STRCHR 1 +#define __HAVE_ARCH_STRRCHR 1 +#define __HAVE_ARCH_STRSTR 1 +#define __HAVE_ARCH_STRLEN 1 +#define __HAVE_ARCH_STRNLEN 1 +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 +#define __HAVE_ARCH_MEMMOVE 1 +#define __HAVE_ARCH_MEMSCAN 1 +#define __HAVE_ARCH_MEMCMP 1 +#define __HAVE_ARCH_MEMCHR 1 +#define __HAVE_ARCH_STRTOK 1 + +#endif /* KERNEL */ +#endif /* _ASM_STRING_H_ */ diff --git a/arch/frv/include/asm/suspend.h b/arch/frv/include/asm/suspend.h new file mode 100644 index 0000000..5fa7b5a --- /dev/null +++ b/arch/frv/include/asm/suspend.h @@ -0,0 +1,20 @@ +/* suspend.h: suspension stuff + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SUSPEND_H +#define _ASM_SUSPEND_H + +static inline int arch_prepare_suspend(void) +{ + return 0; +} + +#endif /* _ASM_SUSPEND_H */ diff --git a/arch/frv/include/asm/swab.h b/arch/frv/include/asm/swab.h new file mode 100644 index 0000000..f305834 --- /dev/null +++ b/arch/frv/include/asm/swab.h @@ -0,0 +1,10 @@ +#ifndef _ASM_SWAB_H +#define _ASM_SWAB_H + +#include + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __SWAB_64_THRU_32__ +#endif + +#endif /* _ASM_SWAB_H */ diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h new file mode 100644 index 0000000..7742ec0 --- /dev/null +++ b/arch/frv/include/asm/system.h @@ -0,0 +1,301 @@ +/* system.h: FR-V CPU control definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SYSTEM_H +#define _ASM_SYSTEM_H + +#include +#include +#include + +struct thread_struct; + +/* + * switch_to(prev, next) should switch from task `prev' to `next' + * `prev' will never be the same as `next'. + * The `mb' is to tell GCC not to cache `current' across this call. + */ +extern asmlinkage +struct task_struct *__switch_to(struct thread_struct *prev_thread, + struct thread_struct *next_thread, + struct task_struct *prev); + +#define switch_to(prev, next, last) \ +do { \ + (prev)->thread.sched_lr = \ + (unsigned long) __builtin_return_address(0); \ + (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ + mb(); \ +} while(0) + +/* + * interrupt flag manipulation + * - use virtual interrupt management since touching the PSR is slow + * - ICC2.Z: T if interrupts virtually disabled + * - ICC2.C: F if interrupts really disabled + * - if Z==1 upon interrupt: + * - C is set to 0 + * - interrupts are really disabled + * - entry.S returns immediately + * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts + * - if taken, the trap: + * - sets ICC2.C + * - enables interrupts + */ +#define local_irq_disable() \ +do { \ + /* set Z flag, but don't change the C flag */ \ + asm volatile(" andcc gr0,gr0,gr0,icc2 \n" \ + : \ + : \ + : "memory", "icc2" \ + ); \ +} while(0) + +#define local_irq_enable() \ +do { \ + /* clear Z flag and then test the C flag */ \ + asm volatile(" oricc gr0,#1,gr0,icc2 \n" \ + " tihi icc2,gr0,#2 \n" \ + : \ + : \ + : "memory", "icc2" \ + ); \ +} while(0) + +#define local_save_flags(flags) \ +do { \ + typecheck(unsigned long, flags); \ + asm volatile("movsg ccr,%0" \ + : "=r"(flags) \ + : \ + : "memory"); \ + \ + /* shift ICC2.Z to bit 0 */ \ + flags >>= 26; \ + \ + /* make flags 1 if interrupts disabled, 0 otherwise */ \ + flags &= 1UL; \ +} while(0) + +#define irqs_disabled() \ + ({unsigned long flags; local_save_flags(flags); !!flags; }) + +#define local_irq_save(flags) \ +do { \ + typecheck(unsigned long, flags); \ + local_save_flags(flags); \ + local_irq_disable(); \ +} while(0) + +#define local_irq_restore(flags) \ +do { \ + typecheck(unsigned long, flags); \ + \ + /* load the Z flag by turning 1 if disabled into 0 if disabled \ + * and thus setting the Z flag but not the C flag */ \ + asm volatile(" xoricc %0,#1,gr0,icc2 \n" \ + /* then test Z=0 and C=0 */ \ + " tihi icc2,gr0,#2 \n" \ + : \ + : "r"(flags) \ + : "memory", "icc2" \ + ); \ + \ +} while(0) + +/* + * real interrupt flag manipulation + */ +#define __local_irq_disable() \ +do { \ + unsigned long psr; \ + asm volatile(" movsg psr,%0 \n" \ + " andi %0,%2,%0 \n" \ + " ori %0,%1,%0 \n" \ + " movgs %0,psr \n" \ + : "=r"(psr) \ + : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ + : "memory"); \ +} while(0) + +#define __local_irq_enable() \ +do { \ + unsigned long psr; \ + asm volatile(" movsg psr,%0 \n" \ + " andi %0,%1,%0 \n" \ + " movgs %0,psr \n" \ + : "=r"(psr) \ + : "i" (~PSR_PIL) \ + : "memory"); \ +} while(0) + +#define __local_save_flags(flags) \ +do { \ + typecheck(unsigned long, flags); \ + asm("movsg psr,%0" \ + : "=r"(flags) \ + : \ + : "memory"); \ +} while(0) + +#define __local_irq_save(flags) \ +do { \ + unsigned long npsr; \ + typecheck(unsigned long, flags); \ + asm volatile(" movsg psr,%0 \n" \ + " andi %0,%3,%1 \n" \ + " ori %1,%2,%1 \n" \ + " movgs %1,psr \n" \ + : "=r"(flags), "=r"(npsr) \ + : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ + : "memory"); \ +} while(0) + +#define __local_irq_restore(flags) \ +do { \ + typecheck(unsigned long, flags); \ + asm volatile(" movgs %0,psr \n" \ + : \ + : "r" (flags) \ + : "memory"); \ +} while(0) + +#define __irqs_disabled() \ + ((__get_PSR() & PSR_PIL) >= PSR_PIL_14) + +/* + * Force strict CPU ordering. + */ +#define nop() asm volatile ("nop"::) +#define mb() asm volatile ("membar" : : :"memory") +#define rmb() asm volatile ("membar" : : :"memory") +#define wmb() asm volatile ("membar" : : :"memory") +#define read_barrier_depends() do { } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) \ + do { xchg(&var, (value)); } while (0) +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do {} while(0) +#define set_mb(var, value) \ + do { var = (value); barrier(); } while (0) +#endif + +extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2))); +extern void free_initmem(void); + +#define arch_align_stack(x) (x) + +/*****************************************************************************/ +/* + * compare and conditionally exchange value with memory + * - if (*ptr == test) then orig = *ptr; *ptr = test; + * - if (*ptr != test) then orig = *ptr; + */ +#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS + +#define cmpxchg(ptr, test, new) \ +({ \ + __typeof__(ptr) __xg_ptr = (ptr); \ + __typeof__(*(ptr)) __xg_orig, __xg_tmp; \ + __typeof__(*(ptr)) __xg_test = (test); \ + __typeof__(*(ptr)) __xg_new = (new); \ + \ + switch (sizeof(__xg_orig)) { \ + case 4: \ + asm volatile( \ + "0: \n" \ + " orcc gr0,gr0,gr0,icc3 \n" \ + " ckeq icc3,cc7 \n" \ + " ld.p %M0,%1 \n" \ + " orcr cc7,cc7,cc3 \n" \ + " sub%I4cc %1,%4,%2,icc0 \n" \ + " bne icc0,#0,1f \n" \ + " cst.p %3,%M0 ,cc3,#1 \n" \ + " corcc gr29,gr29,gr0 ,cc3,#1 \n" \ + " beq icc3,#0,0b \n" \ + "1: \n" \ + : "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp) \ + : "r"(__xg_new), "NPr"(__xg_test) \ + : "memory", "cc7", "cc3", "icc3", "icc0" \ + ); \ + break; \ + \ + default: \ + __xg_orig = (__typeof__(__xg_orig))0; \ + asm volatile("break"); \ + break; \ + } \ + \ + __xg_orig; \ +}) + +#else + +extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new); + +#define cmpxchg(ptr, test, new) \ +({ \ + __typeof__(ptr) __xg_ptr = (ptr); \ + __typeof__(*(ptr)) __xg_orig; \ + __typeof__(*(ptr)) __xg_test = (test); \ + __typeof__(*(ptr)) __xg_new = (new); \ + \ + switch (sizeof(__xg_orig)) { \ + case 4: __xg_orig = (__force __typeof__(*ptr)) \ + __cmpxchg_32((__force uint32_t *)__xg_ptr, \ + (__force uint32_t)__xg_test, \ + (__force uint32_t)__xg_new); break; \ + default: \ + __xg_orig = (__typeof__(__xg_orig))0; \ + asm volatile("break"); \ + break; \ + } \ + \ + __xg_orig; \ +}) + +#endif + +#include + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return cmpxchg((unsigned long *)ptr, old, new); + default: + return __cmpxchg_local_generic(ptr, old, new, size); + } + + return old; +} + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* _ASM_SYSTEM_H */ diff --git a/arch/frv/include/asm/termbits.h b/arch/frv/include/asm/termbits.h new file mode 100644 index 0000000..5568492 --- /dev/null +++ b/arch/frv/include/asm/termbits.h @@ -0,0 +1,202 @@ +#ifndef _ASM_TERMBITS_H__ +#define _ASM_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* Input baud rate */ +#define CTVB 004000000000 /* VisioBraille Terminal flow control */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_TERMBITS_H__ */ + diff --git a/arch/frv/include/asm/termios.h b/arch/frv/include/asm/termios.h new file mode 100644 index 0000000..a62fb58 --- /dev/null +++ b/arch/frv/include/asm/termios.h @@ -0,0 +1,58 @@ +#ifndef _ASM_TERMIOS_H +#define _ASM_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */ + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ +#include +#endif + +#endif /* _ASM_TERMIOS_H */ diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h new file mode 100644 index 0000000..bb53ab7 --- /dev/null +++ b/arch/frv/include/asm/thread_info.h @@ -0,0 +1,144 @@ +/* thread_info.h: description + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * Derived from include/asm-i386/thread_info.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include +#endif + +#define THREAD_SIZE 8192 + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants must also be changed + */ +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long status; /* thread-synchronous flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + + mm_segment_t addr_limit; /* thread address space: + * 0-0xBFFFFFFF for user-thead + * 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + + __u8 supervisor_stack[0]; +}; + +#else /* !__ASSEMBLY__ */ + +#include + +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the thread information struct from C */ +register struct thread_info *__current_thread_info asm("gr15"); + +#define current_thread_info() ({ __current_thread_info; }) + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) \ + ({ \ + struct thread_info *ret; \ + \ + ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ + \ + ret; \ + }) +#else +#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif + +#define free_thread_info(info) kfree(info) + +#endif /* __ASSEMBLY__ */ + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */ +#define TIF_IRET 4 /* return with iret */ +#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ +#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 17 /* OOM killer killed process */ +#define TIF_FREEZE 18 /* freezing for suspend */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_IRET (1 << TIF_IRET) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1 << TIF_FREEZE) + +#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ +#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ + +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + */ +#define TS_USEDFPM 0x0001 /* FPU/Media was used by this task this quantum (SMP) */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/frv/include/asm/timer-regs.h b/arch/frv/include/asm/timer-regs.h new file mode 100644 index 0000000..6c5a871 --- /dev/null +++ b/arch/frv/include/asm/timer-regs.h @@ -0,0 +1,106 @@ +/* timer-regs.h: hardware timer register definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_TIMER_REGS_H +#define _ASM_TIMER_REGS_H + +#include + +extern unsigned long __nongprelbss __clkin_clock_speed_HZ; +extern unsigned long __nongprelbss __ext_bus_clock_speed_HZ; +extern unsigned long __nongprelbss __res_bus_clock_speed_HZ; +extern unsigned long __nongprelbss __sdram_clock_speed_HZ; +extern unsigned long __nongprelbss __core_bus_clock_speed_HZ; +extern unsigned long __nongprelbss __core_clock_speed_HZ; +extern unsigned long __nongprelbss __dsu_clock_speed_HZ; +extern unsigned long __nongprelbss __serial_clock_speed_HZ; + +#define __get_CLKC() ({ *(volatile unsigned long *)(0xfeff9a00); }) + +static inline void __set_CLKC(unsigned long v) +{ + int tmp; + + asm volatile(" st%I0.p %2,%M0 \n" + " setlos %3,%1 \n" + " membar \n" + "0: \n" + " subicc %1,#1,%1,icc0 \n" + " bnc icc0,#1,0b \n" + : "=m"(*(volatile unsigned long *) 0xfeff9a00), "=r"(tmp) + : "r"(v), "i"(256) + : "icc0"); +} + +#define __get_TCTR() ({ *(volatile unsigned long *)(0xfeff9418); }) +#define __get_TPRV() ({ *(volatile unsigned long *)(0xfeff9420); }) +#define __get_TPRCKSL() ({ *(volatile unsigned long *)(0xfeff9428); }) +#define __get_TCSR(T) ({ *(volatile unsigned long *)(0xfeff9400 + 8 * (T)); }) +#define __get_TxCKSL(T) ({ *(volatile unsigned long *)(0xfeff9430 + 8 * (T)); }) + +#define __get_TCSR_DATA(T) ({ __get_TCSR(T) >> 24; }) + +#define __set_TCTR(V) do { *(volatile unsigned long *)(0xfeff9418) = (V); mb(); } while(0) +#define __set_TPRV(V) do { *(volatile unsigned long *)(0xfeff9420) = (V) << 24; mb(); } while(0) +#define __set_TPRCKSL(V) do { *(volatile unsigned long *)(0xfeff9428) = (V); mb(); } while(0) +#define __set_TCSR(T,V) \ +do { *(volatile unsigned long *)(0xfeff9400 + 8 * (T)) = (V); mb(); } while(0) + +#define __set_TxCKSL(T,V) \ +do { *(volatile unsigned long *)(0xfeff9430 + 8 * (T)) = (V); mb(); } while(0) + +#define __set_TCSR_DATA(T,V) __set_TCSR(T, (V) << 24) +#define __set_TxCKSL_DATA(T,V) __set_TxCKSL(T, TxCKSL_EIGHT | __TxCKSL_SELECT((V))) + +/* clock control register */ +#define CLKC_CMODE 0x0f000000 +#define CLKC_SLPL 0x000f0000 +#define CLKC_P0 0x00000100 +#define CLKC_CM 0x00000003 + +#define CLKC_CMODE_s 24 + +/* timer control register - non-readback mode */ +#define TCTR_MODE_0 0x00000000 +#define TCTR_MODE_2 0x04000000 +#define TCTR_MODE_4 0x08000000 +#define TCTR_MODE_5 0x0a000000 +#define TCTR_RL_LATCH 0x00000000 +#define TCTR_RL_RW_LOW8 0x10000000 +#define TCTR_RL_RW_HIGH8 0x20000000 +#define TCTR_RL_RW_LH8 0x30000000 +#define TCTR_SC_CTR0 0x00000000 +#define TCTR_SC_CTR1 0x40000000 +#define TCTR_SC_CTR2 0x80000000 + +/* timer control register - readback mode */ +#define TCTR_CNT0 0x02000000 +#define TCTR_CNT1 0x04000000 +#define TCTR_CNT2 0x08000000 +#define TCTR_NSTATUS 0x10000000 +#define TCTR_NCOUNT 0x20000000 +#define TCTR_SC_READBACK 0xc0000000 + +/* timer control status registers - non-readback mode */ +#define TCSRx_DATA 0xff000000 + +/* timer control status registers - readback mode */ +#define TCSRx_OUTPUT 0x80000000 +#define TCSRx_NULLCOUNT 0x40000000 +#define TCSRx_RL 0x30000000 +#define TCSRx_MODE 0x07000000 + +/* timer clock select registers */ +#define TxCKSL_SELECT 0x0f000000 +#define __TxCKSL_SELECT(X) ((X) << 24) +#define TxCKSL_EIGHT 0xf0000000 + +#endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/frv/include/asm/timex.h b/arch/frv/include/asm/timex.h new file mode 100644 index 0000000..a89bdde --- /dev/null +++ b/arch/frv/include/asm/timex.h @@ -0,0 +1,20 @@ +/* timex.h: FR-V architecture timex specifications + */ +#ifndef _ASM_TIMEX_H +#define _ASM_TIMEX_H + +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ +#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */ + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +#define vxtime_lock() do {} while (0) +#define vxtime_unlock() do {} while (0) + +#endif + diff --git a/arch/frv/include/asm/tlb.h b/arch/frv/include/asm/tlb.h new file mode 100644 index 0000000..cd458eb --- /dev/null +++ b/arch/frv/include/asm/tlb.h @@ -0,0 +1,27 @@ +#ifndef _ASM_TLB_H +#define _ASM_TLB_H + +#include + +#ifdef CONFIG_MMU +extern void check_pgt_cache(void); +#else +#define check_pgt_cache() do {} while(0) +#endif + +/* + * we don't need any special per-pte or per-vma handling... + */ +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it fills up + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include + +#endif /* _ASM_TLB_H */ + diff --git a/arch/frv/include/asm/tlbflush.h b/arch/frv/include/asm/tlbflush.h new file mode 100644 index 0000000..7ac5eaf --- /dev/null +++ b/arch/frv/include/asm/tlbflush.h @@ -0,0 +1,73 @@ +/* tlbflush.h: TLB flushing functions + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_TLBFLUSH_H +#define _ASM_TLBFLUSH_H + +#include +#include + +#ifdef CONFIG_MMU + +#ifndef __ASSEMBLY__ +extern void asmlinkage __flush_tlb_all(void); +extern void asmlinkage __flush_tlb_mm(unsigned long contextid); +extern void asmlinkage __flush_tlb_page(unsigned long contextid, unsigned long start); +extern void asmlinkage __flush_tlb_range(unsigned long contextid, + unsigned long start, unsigned long end); +#endif /* !__ASSEMBLY__ */ + +#define flush_tlb_all() \ +do { \ + preempt_disable(); \ + __flush_tlb_all(); \ + preempt_enable(); \ +} while(0) + +#define flush_tlb_mm(mm) \ +do { \ + preempt_disable(); \ + __flush_tlb_mm((mm)->context.id); \ + preempt_enable(); \ +} while(0) + +#define flush_tlb_range(vma,start,end) \ +do { \ + preempt_disable(); \ + __flush_tlb_range((vma)->vm_mm->context.id, start, end); \ + preempt_enable(); \ +} while(0) + +#define flush_tlb_page(vma,addr) \ +do { \ + preempt_disable(); \ + __flush_tlb_page((vma)->vm_mm->context.id, addr); \ + preempt_enable(); \ +} while(0) + + +#define __flush_tlb_global() flush_tlb_all() +#define flush_tlb() flush_tlb_all() +#define flush_tlb_kernel_range(start, end) flush_tlb_all() + +#else + +#define flush_tlb() BUG() +#define flush_tlb_all() BUG() +#define flush_tlb_mm(mm) BUG() +#define flush_tlb_page(vma,addr) BUG() +#define flush_tlb_range(mm,start,end) BUG() +#define flush_tlb_kernel_range(start, end) BUG() + +#endif + + +#endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/frv/include/asm/topology.h b/arch/frv/include/asm/topology.h new file mode 100644 index 0000000..9427243 --- /dev/null +++ b/arch/frv/include/asm/topology.h @@ -0,0 +1,12 @@ +#ifndef _ASM_TOPOLOGY_H +#define _ASM_TOPOLOGY_H + +#ifdef CONFIG_NUMA + +#error NUMA not supported yet + +#endif /* CONFIG_NUMA */ + +#include + +#endif /* _ASM_TOPOLOGY_H */ diff --git a/arch/frv/include/asm/types.h b/arch/frv/include/asm/types.h new file mode 100644 index 0000000..613bf1e --- /dev/null +++ b/arch/frv/include/asm/types.h @@ -0,0 +1,40 @@ +/* types.h: FRV types + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_TYPES_H +#define _ASM_TYPES_H + +#include + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TYPES_H */ diff --git a/arch/frv/include/asm/uaccess.h b/arch/frv/include/asm/uaccess.h new file mode 100644 index 0000000..53650c9 --- /dev/null +++ b/arch/frv/include/asm/uaccess.h @@ -0,0 +1,321 @@ +/* uaccess.h: userspace accessor functions + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include +#include +#include + +#define HAVE_ARCH_UNMAPPED_AREA /* we decide where to put mmaps */ + +#define __ptr(x) ((unsigned long __force *)(x)) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit()) + +/* + * check that a range of addresses falls within the current address limit + */ +static inline int ___range_ok(unsigned long addr, unsigned long size) +{ +#ifdef CONFIG_MMU + int flag = -EFAULT, tmp; + + asm volatile ( + " addcc %3,%2,%1,icc0 \n" /* set C-flag if addr+size>4GB */ + " subcc.p %1,%4,gr0,icc1 \n" /* jump if addr+size>limit */ + " bc icc0,#0,0f \n" + " bhi icc1,#0,0f \n" + " setlos #0,%0 \n" /* mark okay */ + "0: \n" + : "=r"(flag), "=&r"(tmp) + : "r"(addr), "r"(size), "r"(get_addr_limit()), "0"(flag) + ); + + return flag; + +#else + + if (addr < memory_start || + addr > memory_end || + size > memory_end - memory_start || + addr + size > memory_end) + return -EFAULT; + + return 0; +#endif +} + +#define __range_ok(addr,size) ___range_ok((unsigned long) (addr), (unsigned long) (size)) + +#define access_ok(type,addr,size) (__range_ok((void __user *)(addr), (size)) == 0) +#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ +#define __put_user(x, ptr) \ +({ \ + int __pu_err = 0; \ + \ + typeof(*(ptr)) __pu_val = (x); \ + __chk_user_ptr(ptr); \ + \ + switch (sizeof (*(ptr))) { \ + case 1: \ + __put_user_asm(__pu_err, __pu_val, ptr, "b", "r"); \ + break; \ + case 2: \ + __put_user_asm(__pu_err, __pu_val, ptr, "h", "r"); \ + break; \ + case 4: \ + __put_user_asm(__pu_err, __pu_val, ptr, "", "r"); \ + break; \ + case 8: \ + __put_user_asm(__pu_err, __pu_val, ptr, "d", "e"); \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) + +#define put_user(x, ptr) \ +({ \ + typeof(*(ptr)) __user *_p = (ptr); \ + int _e; \ + \ + _e = __range_ok(_p, sizeof(*_p)); \ + if (_e == 0) \ + _e = __put_user((x), _p); \ + _e; \ +}) + +extern int __put_user_bad(void); + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#ifdef CONFIG_MMU + +#define __put_user_asm(err,x,ptr,dsize,constraint) \ +do { \ + asm volatile("1: st"dsize"%I1 %2,%M1 \n" \ + "2: \n" \ + ".subsection 2 \n" \ + "3: setlos %3,%0 \n" \ + " bra 2b \n" \ + ".previous \n" \ + ".section __ex_table,\"a\" \n" \ + " .balign 8 \n" \ + " .long 1b,3b \n" \ + ".previous" \ + : "=r" (err) \ + : "m" (*__ptr(ptr)), constraint (x), "i"(-EFAULT), "0"(err) \ + : "memory"); \ +} while (0) + +#else + +#define __put_user_asm(err,x,ptr,bwl,con) \ +do { \ + asm(" st"bwl"%I0 %1,%M0 \n" \ + " membar \n" \ + : \ + : "m" (*__ptr(ptr)), con (x) \ + : "memory"); \ +} while (0) + +#endif + +/*****************************************************************************/ +/* + * + */ +#define __get_user(x, ptr) \ +({ \ + int __gu_err = 0; \ + __chk_user_ptr(ptr); \ + \ + switch (sizeof(*(ptr))) { \ + case 1: { \ + unsigned char __gu_val; \ + __get_user_asm(__gu_err, __gu_val, ptr, "ub", "=r"); \ + (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ + break; \ + } \ + case 2: { \ + unsigned short __gu_val; \ + __get_user_asm(__gu_err, __gu_val, ptr, "uh", "=r"); \ + (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ + break; \ + } \ + case 4: { \ + unsigned int __gu_val; \ + __get_user_asm(__gu_err, __gu_val, ptr, "", "=r"); \ + (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ + break; \ + } \ + case 8: { \ + unsigned long long __gu_val; \ + __get_user_asm(__gu_err, __gu_val, ptr, "d", "=e"); \ + (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ + break; \ + } \ + default: \ + __gu_err = __get_user_bad(); \ + break; \ + } \ + __gu_err; \ +}) + +#define get_user(x, ptr) \ +({ \ + const typeof(*(ptr)) __user *_p = (ptr);\ + int _e; \ + \ + _e = __range_ok(_p, sizeof(*_p)); \ + if (likely(_e == 0)) \ + _e = __get_user((x), _p); \ + else \ + (x) = (typeof(x)) 0; \ + _e; \ +}) + +extern int __get_user_bad(void); + +#ifdef CONFIG_MMU + +#define __get_user_asm(err,x,ptr,dtype,constraint) \ +do { \ + asm("1: ld"dtype"%I2 %M2,%1 \n" \ + "2: \n" \ + ".subsection 2 \n" \ + "3: setlos %3,%0 \n" \ + " setlos #0,%1 \n" \ + " bra 2b \n" \ + ".previous \n" \ + ".section __ex_table,\"a\" \n" \ + " .balign 8 \n" \ + " .long 1b,3b \n" \ + ".previous" \ + : "=r" (err), constraint (x) \ + : "m" (*__ptr(ptr)), "i"(-EFAULT), "0"(err) \ + ); \ +} while(0) + +#else + +#define __get_user_asm(err,x,ptr,bwl,con) \ + asm(" ld"bwl"%I1 %M1,%0 \n" \ + " membar \n" \ + : con(x) \ + : "m" (*__ptr(ptr))) + +#endif + +/*****************************************************************************/ +/* + * + */ +#define ____force(x) (__force void *)(void __user *)(x) +#ifdef CONFIG_MMU +extern long __memset_user(void *dst, unsigned long count); +extern long __memcpy_user(void *dst, const void *src, unsigned long count); + +#define clear_user(dst,count) __memset_user(____force(dst), (count)) +#define __copy_from_user_inatomic(to, from, n) __memcpy_user((to), ____force(from), (n)) +#define __copy_to_user_inatomic(to, from, n) __memcpy_user(____force(to), (from), (n)) + +#else + +#define clear_user(dst,count) (memset(____force(dst), 0, (count)), 0) +#define __copy_from_user_inatomic(to, from, n) (memcpy((to), ____force(from), (n)), 0) +#define __copy_to_user_inatomic(to, from, n) (memcpy(____force(to), (from), (n)), 0) + +#endif + +#define __clear_user clear_user + +static inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + might_sleep(); + return __copy_to_user_inatomic(to, from, n); +} + +static inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + might_sleep(); + return __copy_from_user_inatomic(to, from, n); +} + +static inline long copy_from_user(void *to, const void __user *from, unsigned long n) +{ + unsigned long ret = n; + + if (likely(__access_ok(from, n))) + ret = __copy_from_user(to, from, n); + + if (unlikely(ret != 0)) + memset(to + (n - ret), 0, ret); + + return ret; +} + +static inline long copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return likely(__access_ok(to, n)) ? __copy_to_user(to, from, n) : n; +} + +extern long strncpy_from_user(char *dst, const char __user *src, long count); +extern long strnlen_user(const char __user *src, long count); + +#define strlen_user(str) strnlen_user(str, 32767) + +extern unsigned long search_exception_table(unsigned long addr); + +#endif /* _ASM_UACCESS_H */ diff --git a/arch/frv/include/asm/ucontext.h b/arch/frv/include/asm/ucontext.h new file mode 100644 index 0000000..8d8c0c9 --- /dev/null +++ b/arch/frv/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef _ASM_UCONTEXT_H +#define _ASM_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif diff --git a/arch/frv/include/asm/unaligned.h b/arch/frv/include/asm/unaligned.h new file mode 100644 index 0000000..6c61c05 --- /dev/null +++ b/arch/frv/include/asm/unaligned.h @@ -0,0 +1,22 @@ +/* unaligned.h: unaligned access handler + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNALIGNED_H +#define _ASM_UNALIGNED_H + +#include +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* _ASM_UNALIGNED_H */ diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h new file mode 100644 index 0000000..edcfaf5 --- /dev/null +++ b/arch/frv/include/asm/unistd.h @@ -0,0 +1,382 @@ +#ifndef _ASM_UNISTD_H_ +#define _ASM_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +// #define __NR_oldolduname /* 59 */ obsolete +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +// #define __NR_mmap 90 /* obsolete - not implemented */ +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +// #define __NR_profil /* 98 */ obsolete +#define __NR_statfs 99 +#define __NR_fstatfs 100 +// #define __NR_ioperm /* 101 */ not supported +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +// #define __NR_olduname /* 109 */ obsolete +// #define __NR_iopl /* 110 */ not supported +#define __NR_vhangup 111 +// #define __NR_idle /* 112 */ Obsolete +// #define __NR_vm86old /* 113 */ not supported +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +// #define __NR_modify_ldt /* 123 */ not supported +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +// #define __NR_vm86 /* 166 */ not supported +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 + +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +#define __NR_security 223 /* syscall for security modules */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +/* #define __NR_sys_setaltroot 285 */ +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd_create 322 +#define __NR_eventfd 323 +#define __NR_fallocate 324 +#define __NR_timerfd_settime 325 +#define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 + +#ifdef __KERNEL__ + +#define NR_syscalls 333 + +#define __ARCH_WANT_IPC_PARSE_VERSION +/* #define __ARCH_WANT_OLD_READDIR */ +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +/* #define __ARCH_WANT_SYS_GETHOSTNAME */ +#define __ARCH_WANT_SYS_PAUSE +/* #define __ARCH_WANT_SYS_SGETMASK */ +/* #define __ARCH_WANT_SYS_SIGNAL */ +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */ +#define __ARCH_WANT_SYS_OLDUMOUNT +/* #define __ARCH_WANT_SYS_SIGPENDING */ +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_UNISTD_H_ */ diff --git a/arch/frv/include/asm/user.h b/arch/frv/include/asm/user.h new file mode 100644 index 0000000..82fa8fa --- /dev/null +++ b/arch/frv/include/asm/user.h @@ -0,0 +1,80 @@ +/* user.h: FR-V core file format stuff + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_USER_H +#define _ASM_USER_H + +#include +#include + +/* Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the 'trad-core' bfd). There are quite a number of + * obstacles to being able to view the contents of the floating point + * registers, and until these are solved you will not be able to view + * the contents of them. Actually, you can read in the core file and + * look at the contents of the user struct to find out what the + * floating point registers contain. + * + * The actual file contents are as follows: + * UPAGE: + * 1 page consisting of a user struct that tells gdb what is present + * in the file. Directly after this is a copy of the task_struct, + * which is currently not used by gdb, but it may come in useful at + * some point. All of the registers are stored as part of the + * upage. The upage should always be only one page. + * + * DATA: + * The data area is stored. We use current->end_text to + * current->brk to pick up all of the user variables, plus any + * memory that may have been malloced. No attempt is made to + * determine if a page is demand-zero or if a page is totally + * unused, we just cover the entire range. All of the addresses are + * rounded in such a way that an integral number of pages is + * written. + * + * STACK: + * We need the stack information in order to get a meaningful + * backtrace. We need to write the data from (esp) to + * current->start_stack, so we round each of these off in order to + * be able to write an integer number of pages. The minimum core + * file size is 3 pages, or 12288 bytes. + */ + +/* When the kernel dumps core, it starts by dumping the user struct - + * this will be used by gdb to figure out where the data and stack segments + * are within the file, and what virtual addresses to use. + */ +struct user { + /* We start with the registers, to mimic the way that "memory" is returned + * from the ptrace(3,...) function. */ + struct user_context regs; + + /* The rest of this junk is to help gdb figure out what goes where */ + unsigned long u_tsize; /* Text segment size (pages). */ + unsigned long u_dsize; /* Data segment size (pages). */ + unsigned long u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + * This is actually the bottom of the stack, + * the top of the stack is always found in the + * esp register. */ + long int signal; /* Signal that caused the core dump. */ + + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif diff --git a/arch/frv/include/asm/vga.h b/arch/frv/include/asm/vga.h new file mode 100644 index 0000000..a702c80 --- /dev/null +++ b/arch/frv/include/asm/vga.h @@ -0,0 +1,17 @@ +/* vga.h: VGA register stuff + * + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_VGA_H +#define _ASM_VGA_H + + + +#endif /* _ASM_VGA_H */ diff --git a/arch/frv/include/asm/virtconvert.h b/arch/frv/include/asm/virtconvert.h new file mode 100644 index 0000000..59788fa --- /dev/null +++ b/arch/frv/include/asm/virtconvert.h @@ -0,0 +1,41 @@ +/* virtconvert.h: virtual/physical/page address convertion + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_VIRTCONVERT_H +#define _ASM_VIRTCONVERT_H + +/* + * Macros used for converting between virtual and physical mappings. + */ + +#ifdef __KERNEL__ + +#include + +#ifdef CONFIG_MMU + +#define phys_to_virt(vaddr) ((void *) ((unsigned long)(vaddr) + PAGE_OFFSET)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr) - PAGE_OFFSET) + +#else + +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#endif + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT)) +#define page_to_phys(page) virt_to_phys((void *)__page_address(page)) + +#endif +#endif diff --git a/arch/frv/include/asm/xor.h b/arch/frv/include/asm/xor.h new file mode 100644 index 0000000..c82eb12 --- /dev/null +++ b/arch/frv/include/asm/xor.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-frv/Kbuild b/include/asm-frv/Kbuild deleted file mode 100644 index 0f8956d..0000000 --- a/include/asm-frv/Kbuild +++ /dev/null @@ -1,5 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += registers.h - -unifdef-y += termios.h diff --git a/include/asm-frv/atomic.h b/include/asm-frv/atomic.h deleted file mode 100644 index 296c35c..0000000 --- a/include/asm-frv/atomic.h +++ /dev/null @@ -1,198 +0,0 @@ -/* atomic.h: atomic operation emulation for FR-V - * - * For an explanation of how atomic ops work in this arch, see: - * Documentation/frv/atomic-ops.txt - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_ATOMIC_H -#define _ASM_ATOMIC_H - -#include -#include -#include - -#ifdef CONFIG_SMP -#error not SMP safe -#endif - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - * - * We do not have SMP systems, so we don't have to deal with that. - */ - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#define ATOMIC_INIT(i) { (i) } -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = (i)) - -#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long val; - - asm("0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - " add%I2 %1,%2,%1 \n" - " cst.p %1,%M0 ,cc3,#1 \n" - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ - " beq icc3,#0,0b \n" - : "+U"(v->counter), "=&r"(val) - : "NPr"(i) - : "memory", "cc7", "cc3", "icc3" - ); - - return val; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long val; - - asm("0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - " sub%I2 %1,%2,%1 \n" - " cst.p %1,%M0 ,cc3,#1 \n" - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ - " beq icc3,#0,0b \n" - : "+U"(v->counter), "=&r"(val) - : "NPr"(i) - : "memory", "cc7", "cc3", "icc3" - ); - - return val; -} - -#else - -extern int atomic_add_return(int i, atomic_t *v); -extern int atomic_sub_return(int i, atomic_t *v); - -#endif - -static inline int atomic_add_negative(int i, atomic_t *v) -{ - return atomic_add_return(i, v) < 0; -} - -static inline void atomic_add(int i, atomic_t *v) -{ - atomic_add_return(i, v); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - atomic_sub_return(i, v); -} - -static inline void atomic_inc(atomic_t *v) -{ - atomic_add_return(1, v); -} - -static inline void atomic_dec(atomic_t *v) -{ - atomic_sub_return(1, v); -} - -#define atomic_dec_return(v) atomic_sub_return(1, (v)) -#define atomic_inc_return(v) atomic_add_return(1, (v)) - -#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) - -/*****************************************************************************/ -/* - * exchange value with memory - */ -#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS - -#define xchg(ptr, x) \ -({ \ - __typeof__(ptr) __xg_ptr = (ptr); \ - __typeof__(*(ptr)) __xg_orig; \ - \ - switch (sizeof(__xg_orig)) { \ - case 4: \ - asm volatile( \ - "swap%I0 %M0,%1" \ - : "+m"(*__xg_ptr), "=r"(__xg_orig) \ - : "1"(x) \ - : "memory" \ - ); \ - break; \ - \ - default: \ - __xg_orig = (__typeof__(__xg_orig))0; \ - asm volatile("break"); \ - break; \ - } \ - \ - __xg_orig; \ -}) - -#else - -extern uint32_t __xchg_32(uint32_t i, volatile void *v); - -#define xchg(ptr, x) \ -({ \ - __typeof__(ptr) __xg_ptr = (ptr); \ - __typeof__(*(ptr)) __xg_orig; \ - \ - switch (sizeof(__xg_orig)) { \ - case 4: __xg_orig = (__typeof__(*(ptr))) __xchg_32((uint32_t) x, __xg_ptr); break; \ - default: \ - __xg_orig = (__typeof__(__xg_orig))0; \ - asm volatile("break"); \ - break; \ - } \ - __xg_orig; \ -}) - -#endif - -#define tas(ptr) (xchg((ptr), 1)) - -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#include -#endif /* _ASM_ATOMIC_H */ diff --git a/include/asm-frv/auxvec.h b/include/asm-frv/auxvec.h deleted file mode 100644 index 0771077..0000000 --- a/include/asm-frv/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __FRV_AUXVEC_H -#define __FRV_AUXVEC_H - -#endif diff --git a/include/asm-frv/ax88796.h b/include/asm-frv/ax88796.h deleted file mode 100644 index 637e980..0000000 --- a/include/asm-frv/ax88796.h +++ /dev/null @@ -1,22 +0,0 @@ -/* ax88796.h: access points to the driver for the AX88796 NE2000 clone - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_AX88796_H -#define _ASM_AX88796_H - -#include - -#define AX88796_IOADDR (__region_CS1 + 0x200) -#define AX88796_IRQ IRQ_CPU_EXTERNAL7 -#define AX88796_FULL_DUPLEX 0 /* force full duplex */ -#define AX88796_BUS_INFO "CS1#+0x200" /* bus info for ethtool */ - -#endif /* _ASM_AX88796_H */ diff --git a/include/asm-frv/bitops.h b/include/asm-frv/bitops.h deleted file mode 100644 index 287f6f6..0000000 --- a/include/asm-frv/bitops.h +++ /dev/null @@ -1,412 +0,0 @@ -/* bitops.h: bit operations for the Fujitsu FR-V CPUs - * - * For an explanation of how atomic ops work in this arch, see: - * Documentation/frv/atomic-ops.txt - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_BITOPS_H -#define _ASM_BITOPS_H - -#include -#include - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS -static inline -unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v) -{ - unsigned long old, tmp; - - asm volatile( - "0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - " and%I3 %1,%3,%2 \n" - " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */ - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */ - " beq icc3,#0,0b \n" - : "+U"(*v), "=&r"(old), "=r"(tmp) - : "NPr"(~mask) - : "memory", "cc7", "cc3", "icc3" - ); - - return old; -} - -static inline -unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v) -{ - unsigned long old, tmp; - - asm volatile( - "0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - " or%I3 %1,%3,%2 \n" - " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */ - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */ - " beq icc3,#0,0b \n" - : "+U"(*v), "=&r"(old), "=r"(tmp) - : "NPr"(mask) - : "memory", "cc7", "cc3", "icc3" - ); - - return old; -} - -static inline -unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v) -{ - unsigned long old, tmp; - - asm volatile( - "0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - " xor%I3 %1,%3,%2 \n" - " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */ - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */ - " beq icc3,#0,0b \n" - : "+U"(*v), "=&r"(old), "=r"(tmp) - : "NPr"(mask) - : "memory", "cc7", "cc3", "icc3" - ); - - return old; -} - -#else - -extern unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v); -extern unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v); -extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v); - -#endif - -#define atomic_clear_mask(mask, v) atomic_test_and_ANDNOT_mask((mask), (v)) -#define atomic_set_mask(mask, v) atomic_test_and_OR_mask((mask), (v)) - -static inline int test_and_clear_bit(int nr, volatile void *addr) -{ - volatile unsigned long *ptr = addr; - unsigned long mask = 1UL << (nr & 31); - ptr += nr >> 5; - return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0; -} - -static inline int test_and_set_bit(int nr, volatile void *addr) -{ - volatile unsigned long *ptr = addr; - unsigned long mask = 1UL << (nr & 31); - ptr += nr >> 5; - return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0; -} - -static inline int test_and_change_bit(int nr, volatile void *addr) -{ - volatile unsigned long *ptr = addr; - unsigned long mask = 1UL << (nr & 31); - ptr += nr >> 5; - return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0; -} - -static inline void clear_bit(int nr, volatile void *addr) -{ - test_and_clear_bit(nr, addr); -} - -static inline void set_bit(int nr, volatile void *addr) -{ - test_and_set_bit(nr, addr); -} - -static inline void change_bit(int nr, volatile void * addr) -{ - test_and_change_bit(nr, addr); -} - -static inline void __clear_bit(int nr, volatile void * addr) -{ - volatile unsigned long *a = addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 31); - *a &= ~mask; -} - -static inline void __set_bit(int nr, volatile void * addr) -{ - volatile unsigned long *a = addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 31); - *a |= mask; -} - -static inline void __change_bit(int nr, volatile void *addr) -{ - volatile unsigned long *a = addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 31); - *a ^= mask; -} - -static inline int __test_and_clear_bit(int nr, volatile void * addr) -{ - volatile unsigned long *a = addr; - int mask, retval; - - a += nr >> 5; - mask = 1 << (nr & 31); - retval = (mask & *a) != 0; - *a &= ~mask; - return retval; -} - -static inline int __test_and_set_bit(int nr, volatile void * addr) -{ - volatile unsigned long *a = addr; - int mask, retval; - - a += nr >> 5; - mask = 1 << (nr & 31); - retval = (mask & *a) != 0; - *a |= mask; - return retval; -} - -static inline int __test_and_change_bit(int nr, volatile void * addr) -{ - volatile unsigned long *a = addr; - int mask, retval; - - a += nr >> 5; - mask = 1 << (nr & 31); - retval = (mask & *a) != 0; - *a ^= mask; - return retval; -} - -/* - * This routine doesn't need to be atomic. - */ -static inline int __constant_test_bit(int nr, const volatile void * addr) -{ - return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; -} - -static inline int __test_bit(int nr, const volatile void * addr) -{ - int * a = (int *) addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - return ((mask & *a) != 0); -} - -#define test_bit(nr,addr) \ -(__builtin_constant_p(nr) ? \ - __constant_test_bit((nr),(addr)) : \ - __test_bit((nr),(addr))) - -#include - -/** - * fls - find last bit set - * @x: the word to search - * - * This is defined the same way as ffs: - * - return 32..1 to indicate bit 31..0 most significant bit set - * - return 0 to indicate no bits set - */ -#define fls(x) \ -({ \ - int bit; \ - \ - asm(" subcc %1,gr0,gr0,icc0 \n" \ - " ckne icc0,cc4 \n" \ - " cscan.p %1,gr0,%0 ,cc4,#1 \n" \ - " csub %0,%0,%0 ,cc4,#0 \n" \ - " csub %2,%0,%0 ,cc4,#1 \n" \ - : "=&r"(bit) \ - : "r"(x), "r"(32) \ - : "icc0", "cc4" \ - ); \ - \ - bit; \ -}) - -/** - * fls64 - find last bit set in a 64-bit value - * @n: the value to search - * - * This is defined the same way as ffs: - * - return 64..1 to indicate bit 63..0 most significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int fls64(u64 n) -{ - union { - u64 ll; - struct { u32 h, l; }; - } _; - int bit, x, y; - - _.ll = n; - - asm(" subcc.p %3,gr0,gr0,icc0 \n" - " subcc %4,gr0,gr0,icc1 \n" - " ckne icc0,cc4 \n" - " ckne icc1,cc5 \n" - " norcr cc4,cc5,cc6 \n" - " csub.p %0,%0,%0 ,cc6,1 \n" - " orcr cc5,cc4,cc4 \n" - " andcr cc4,cc5,cc4 \n" - " cscan.p %3,gr0,%0 ,cc4,0 \n" - " setlos #64,%1 \n" - " cscan.p %4,gr0,%0 ,cc4,1 \n" - " setlos #32,%2 \n" - " csub.p %1,%0,%0 ,cc4,0 \n" - " csub %2,%0,%0 ,cc4,1 \n" - : "=&r"(bit), "=r"(x), "=r"(y) - : "0r"(_.h), "r"(_.l) - : "icc0", "icc1", "cc4", "cc5", "cc6" - ); - return bit; - -} - -/** - * ffs - find first bit set - * @x: the word to search - * - * - return 32..1 to indicate bit 31..0 most least significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int ffs(int x) -{ - /* Note: (x & -x) gives us a mask that is the least significant - * (rightmost) 1-bit of the value in x. - */ - return fls(x & -x); -} - -/** - * __ffs - find first bit set - * @x: the word to search - * - * - return 31..0 to indicate bit 31..0 most least significant bit set - * - if no bits are set in x, the result is undefined - */ -static inline __attribute__((const)) -int __ffs(unsigned long x) -{ - int bit; - asm("scan %1,gr0,%0" : "=r"(bit) : "r"(x & -x)); - return 31 - bit; -} - -/** - * __fls - find last (most-significant) set bit in a long word - * @word: the word to search - * - * Undefined if no set bit exists, so code should check against 0 first. - */ -static inline unsigned long __fls(unsigned long word) -{ - unsigned long bit; - asm("scan %1,gr0,%0" : "=r"(bit) : "r"(word)); - return bit; -} - -/* - * special slimline version of fls() for calculating ilog2_u32() - * - note: no protection against n == 0 - */ -#define ARCH_HAS_ILOG2_U32 -static inline __attribute__((const)) -int __ilog2_u32(u32 n) -{ - int bit; - asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n)); - return 31 - bit; -} - -/* - * special slimline version of fls64() for calculating ilog2_u64() - * - note: no protection against n == 0 - */ -#define ARCH_HAS_ILOG2_U64 -static inline __attribute__((const)) -int __ilog2_u64(u64 n) -{ - union { - u64 ll; - struct { u32 h, l; }; - } _; - int bit, x, y; - - _.ll = n; - - asm(" subcc %3,gr0,gr0,icc0 \n" - " ckeq icc0,cc4 \n" - " cscan.p %3,gr0,%0 ,cc4,0 \n" - " setlos #63,%1 \n" - " cscan.p %4,gr0,%0 ,cc4,1 \n" - " setlos #31,%2 \n" - " csub.p %1,%0,%0 ,cc4,0 \n" - " csub %2,%0,%0 ,cc4,1 \n" - : "=&r"(bit), "=r"(x), "=r"(y) - : "0r"(_.h), "r"(_.l) - : "icc0", "cc4" - ); - return bit; -} - -#include -#include -#include - -#include - -#define ext2_set_bit_atomic(lock,nr,addr) test_and_set_bit ((nr) ^ 0x18, (addr)) -#define ext2_clear_bit_atomic(lock,nr,addr) test_and_clear_bit((nr) ^ 0x18, (addr)) - -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_BITOPS_H */ diff --git a/include/asm-frv/bug.h b/include/asm-frv/bug.h deleted file mode 100644 index 6b1b44d..0000000 --- a/include/asm-frv/bug.h +++ /dev/null @@ -1,53 +0,0 @@ -/* bug.h: FRV bug trapping - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_BUG_H -#define _ASM_BUG_H - -#include - -#ifdef CONFIG_BUG -/* - * Tell the user there is some problem. - */ -extern asmlinkage void __debug_bug_trap(int signr); - -#ifdef CONFIG_NO_KERNEL_MSG -#define _debug_bug_printk() -#else -extern void __debug_bug_printk(const char *file, unsigned line); -#define _debug_bug_printk() __debug_bug_printk(__FILE__, __LINE__) -#endif - -#define _debug_bug_trap(signr) \ -do { \ - __debug_bug_trap(signr); \ - asm volatile("nop"); \ -} while(0) - -#define HAVE_ARCH_BUG -#define BUG() \ -do { \ - _debug_bug_printk(); \ - _debug_bug_trap(6 /*SIGABRT*/); \ -} while (0) - -#ifdef CONFIG_GDBSTUB -#define HAVE_ARCH_KGDB_RAISE -#define kgdb_raise(signr) do { _debug_bug_trap(signr); } while(0) - -#define HAVE_ARCH_KGDB_BAD_PAGE -#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0) -#endif -#endif - -#include - -#endif diff --git a/include/asm-frv/bugs.h b/include/asm-frv/bugs.h deleted file mode 100644 index f2382be..0000000 --- a/include/asm-frv/bugs.h +++ /dev/null @@ -1,14 +0,0 @@ -/* bugs.h: arch bug checking entry - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -static inline void check_bugs(void) -{ -} diff --git a/include/asm-frv/busctl-regs.h b/include/asm-frv/busctl-regs.h deleted file mode 100644 index bb0ff48..0000000 --- a/include/asm-frv/busctl-regs.h +++ /dev/null @@ -1,41 +0,0 @@ -/* busctl-regs.h: FR400-series CPU bus controller registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_BUSCTL_REGS_H -#define _ASM_BUSCTL_REGS_H - -/* bus controller registers */ -#define __get_LGCR() ({ *(volatile unsigned long *)(0xfe000010); }) -#define __get_LMAICR() ({ *(volatile unsigned long *)(0xfe000030); }) -#define __get_LEMBR() ({ *(volatile unsigned long *)(0xfe000040); }) -#define __get_LEMAM() ({ *(volatile unsigned long *)(0xfe000048); }) -#define __get_LCR(R) ({ *(volatile unsigned long *)(0xfe000100 + 8*(R)); }) -#define __get_LSBR(R) ({ *(volatile unsigned long *)(0xfe000c00 + 8*(R)); }) -#define __get_LSAM(R) ({ *(volatile unsigned long *)(0xfe000d00 + 8*(R)); }) - -#define __set_LGCR(V) do { *(volatile unsigned long *)(0xfe000010) = (V); } while(0) -#define __set_LMAICR(V) do { *(volatile unsigned long *)(0xfe000030) = (V); } while(0) -#define __set_LEMBR(V) do { *(volatile unsigned long *)(0xfe000040) = (V); } while(0) -#define __set_LEMAM(V) do { *(volatile unsigned long *)(0xfe000048) = (V); } while(0) -#define __set_LCR(R,V) do { *(volatile unsigned long *)(0xfe000100 + 8*(R)) = (V); } while(0) -#define __set_LSBR(R,V) do { *(volatile unsigned long *)(0xfe000c00 + 8*(R)) = (V); } while(0) -#define __set_LSAM(R,V) do { *(volatile unsigned long *)(0xfe000d00 + 8*(R)) = (V); } while(0) - -/* FR401 SDRAM controller registers */ -#define __get_DBR(R) ({ *(volatile unsigned long *)(0xfe000e00 + 8*(R)); }) -#define __get_DAM(R) ({ *(volatile unsigned long *)(0xfe000f00 + 8*(R)); }) - -/* FR551 SDRAM controller registers */ -#define __get_DARS(R) ({ *(volatile unsigned long *)(0xfeff0100 + 8*(R)); }) -#define __get_DAMK(R) ({ *(volatile unsigned long *)(0xfeff0110 + 8*(R)); }) - - -#endif /* _ASM_BUSCTL_REGS_H */ diff --git a/include/asm-frv/byteorder.h b/include/asm-frv/byteorder.h deleted file mode 100644 index f29b759..0000000 --- a/include/asm-frv/byteorder.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_BYTEORDER_H -#define _ASM_BYTEORDER_H - -#include - -#endif /* _ASM_BYTEORDER_H */ diff --git a/include/asm-frv/cache.h b/include/asm-frv/cache.h deleted file mode 100644 index 2797163..0000000 --- a/include/asm-frv/cache.h +++ /dev/null @@ -1,23 +0,0 @@ -/* cache.h: FRV cache definitions - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASM_CACHE_H -#define __ASM_CACHE_H - - -/* bytes per L1 cache line */ -#define L1_CACHE_SHIFT (CONFIG_FRV_L1_CACHE_SHIFT) -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#define __cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) -#define ____cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) - -#endif diff --git a/include/asm-frv/cacheflush.h b/include/asm-frv/cacheflush.h deleted file mode 100644 index 432a69e..0000000 --- a/include/asm-frv/cacheflush.h +++ /dev/null @@ -1,104 +0,0 @@ -/* cacheflush.h: FRV cache flushing routines - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_CACHEFLUSH_H -#define _ASM_CACHEFLUSH_H - -/* Keep includes the same across arches. */ -#include - -/* - * virtually-indexed cache management (our cache is physically indexed) - */ -#define flush_cache_all() do {} while(0) -#define flush_cache_mm(mm) do {} while(0) -#define flush_cache_dup_mm(mm) do {} while(0) -#define flush_cache_range(mm, start, end) do {} while(0) -#define flush_cache_page(vma, vmaddr, pfn) do {} while(0) -#define flush_cache_vmap(start, end) do {} while(0) -#define flush_cache_vunmap(start, end) do {} while(0) -#define flush_dcache_mmap_lock(mapping) do {} while(0) -#define flush_dcache_mmap_unlock(mapping) do {} while(0) - -/* - * physically-indexed cache management - * - see arch/frv/lib/cache.S - */ -extern void frv_dcache_writeback(unsigned long start, unsigned long size); -extern void frv_cache_invalidate(unsigned long start, unsigned long size); -extern void frv_icache_invalidate(unsigned long start, unsigned long size); -extern void frv_cache_wback_inv(unsigned long start, unsigned long size); - -static inline void __flush_cache_all(void) -{ - asm volatile(" dcef @(gr0,gr0),#1 \n" - " icei @(gr0,gr0),#1 \n" - " membar \n" - : : : "memory" - ); -} - -/* dcache/icache coherency... */ -#ifdef CONFIG_MMU -extern void flush_dcache_page(struct page *page); -#else -static inline void flush_dcache_page(struct page *page) -{ - unsigned long addr = page_to_phys(page); - frv_dcache_writeback(addr, addr + PAGE_SIZE); -} -#endif - -static inline void flush_page_to_ram(struct page *page) -{ - flush_dcache_page(page); -} - -static inline void flush_icache(void) -{ - __flush_cache_all(); -} - -static inline void flush_icache_range(unsigned long start, unsigned long end) -{ - frv_cache_wback_inv(start, end); -} - -#ifdef CONFIG_MMU -extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long start, unsigned long len); -#else -static inline void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long start, unsigned long len) -{ - frv_cache_wback_inv(start, start + len); -} -#endif - -static inline void flush_icache_page(struct vm_area_struct *vma, struct page *page) -{ - flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE); -} - -/* - * permit ptrace to access another process's address space through the icache - * and the dcache - */ -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - memcpy((dst), (src), (len)); \ - flush_icache_user_range((vma), (page), (vaddr), (len)); \ -} while(0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy((dst), (src), (len)) - -#endif /* _ASM_CACHEFLUSH_H */ diff --git a/include/asm-frv/checksum.h b/include/asm-frv/checksum.h deleted file mode 100644 index 269da09..0000000 --- a/include/asm-frv/checksum.h +++ /dev/null @@ -1,180 +0,0 @@ -/* checksum.h: FRV checksumming - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_CHECKSUM_H -#define _ASM_CHECKSUM_H - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err); - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -static inline -__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int tmp, inc, sum = 0; - - asm(" addcc gr0,gr0,gr0,icc0\n" /* clear icc0.C */ - " subi %1,#4,%1 \n" - "0: \n" - " ldu.p @(%1,%3),%4 \n" - " subicc %2,#1,%2,icc1 \n" - " addxcc.p %4,%0,%0,icc0 \n" - " bhi icc1,#2,0b \n" - - /* fold the 33-bit result into 16-bits */ - " addxcc gr0,%0,%0,icc0 \n" - " srli %0,#16,%1 \n" - " sethi #0,%0 \n" - " add %1,%0,%0 \n" - " srli %0,#16,%1 \n" - " add %1,%0,%0 \n" - - : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp) - : "0" (sum), "1" (iph), "2" (ihl), "3" (4), - "m"(*(volatile struct { int _[100]; } *)iph) - : "icc0", "icc1", "memory" - ); - - return (__force __sum16)~sum; -} - -/* - * Fold a partial checksum - */ -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp; - - asm(" srli %0,#16,%1 \n" - " sethi #0,%0 \n" - " add %1,%0,%0 \n" - " srli %0,#16,%1 \n" - " add %1,%0,%0 \n" - : "=r"(sum), "=&r"(tmp) - : "0"(sum) - ); - - return (__force __sum16)~sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - asm(" addcc %1,%0,%0,icc0 \n" - " addxcc %2,%0,%0,icc0 \n" - " addxcc %3,%0,%0,icc0 \n" - " addxcc gr0,%0,%0,icc0 \n" - : "=r" (sum) - : "r" (daddr), "r" (saddr), "r" (len + proto), "0"(sum) - : "icc0" - ); - return sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define _HAVE_ARCH_IPV6_CSUM -static inline __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - unsigned long tmp, tmp2; - - asm(" addcc %2,%0,%0,icc0 \n" - - /* add up the source addr */ - " ldi @(%3,0),%1 \n" - " addxcc %1,%0,%0,icc0 \n" - " ldi @(%3,4),%2 \n" - " addxcc %2,%0,%0,icc0 \n" - " ldi @(%3,8),%1 \n" - " addxcc %1,%0,%0,icc0 \n" - " ldi @(%3,12),%2 \n" - " addxcc %2,%0,%0,icc0 \n" - - /* add up the dest addr */ - " ldi @(%4,0),%1 \n" - " addxcc %1,%0,%0,icc0 \n" - " ldi @(%4,4),%2 \n" - " addxcc %2,%0,%0,icc0 \n" - " ldi @(%4,8),%1 \n" - " addxcc %1,%0,%0,icc0 \n" - " ldi @(%4,12),%2 \n" - " addxcc %2,%0,%0,icc0 \n" - - /* fold the 33-bit result into 16-bits */ - " addxcc gr0,%0,%0,icc0 \n" - " srli %0,#16,%1 \n" - " sethi #0,%0 \n" - " add %1,%0,%0 \n" - " srli %0,#16,%1 \n" - " add %1,%0,%0 \n" - - : "=r" (sum), "=&r" (tmp), "=r" (tmp2) - : "r" (saddr), "r" (daddr), "0" (sum), "2" (len + proto) - : "icc0" - ); - - return (__force __sum16)~sum; -} - -#endif /* _ASM_CHECKSUM_H */ diff --git a/include/asm-frv/cpu-irqs.h b/include/asm-frv/cpu-irqs.h deleted file mode 100644 index 478f349..0000000 --- a/include/asm-frv/cpu-irqs.h +++ /dev/null @@ -1,81 +0,0 @@ -/* cpu-irqs.h: on-CPU peripheral irqs - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_CPU_IRQS_H -#define _ASM_CPU_IRQS_H - -#ifndef __ASSEMBLY__ - -/* IRQ to level mappings */ -#define IRQ_GDBSTUB_LEVEL 15 -#define IRQ_UART_LEVEL 13 - -#ifdef CONFIG_GDBSTUB_UART0 -#define IRQ_UART0_LEVEL IRQ_GDBSTUB_LEVEL -#else -#define IRQ_UART0_LEVEL IRQ_UART_LEVEL -#endif - -#ifdef CONFIG_GDBSTUB_UART1 -#define IRQ_UART1_LEVEL IRQ_GDBSTUB_LEVEL -#else -#define IRQ_UART1_LEVEL IRQ_UART_LEVEL -#endif - -#define IRQ_DMA0_LEVEL 14 -#define IRQ_DMA1_LEVEL 14 -#define IRQ_DMA2_LEVEL 14 -#define IRQ_DMA3_LEVEL 14 -#define IRQ_DMA4_LEVEL 14 -#define IRQ_DMA5_LEVEL 14 -#define IRQ_DMA6_LEVEL 14 -#define IRQ_DMA7_LEVEL 14 - -#define IRQ_TIMER0_LEVEL 12 -#define IRQ_TIMER1_LEVEL 11 -#define IRQ_TIMER2_LEVEL 10 - -#define IRQ_XIRQ0_LEVEL 1 -#define IRQ_XIRQ1_LEVEL 2 -#define IRQ_XIRQ2_LEVEL 3 -#define IRQ_XIRQ3_LEVEL 4 -#define IRQ_XIRQ4_LEVEL 5 -#define IRQ_XIRQ5_LEVEL 6 -#define IRQ_XIRQ6_LEVEL 7 -#define IRQ_XIRQ7_LEVEL 8 - -/* IRQ IDs presented to drivers */ -#define IRQ_CPU__UNUSED IRQ_BASE_CPU -#define IRQ_CPU_UART0 (IRQ_BASE_CPU + IRQ_UART0_LEVEL) -#define IRQ_CPU_UART1 (IRQ_BASE_CPU + IRQ_UART1_LEVEL) -#define IRQ_CPU_TIMER0 (IRQ_BASE_CPU + IRQ_TIMER0_LEVEL) -#define IRQ_CPU_TIMER1 (IRQ_BASE_CPU + IRQ_TIMER1_LEVEL) -#define IRQ_CPU_TIMER2 (IRQ_BASE_CPU + IRQ_TIMER2_LEVEL) -#define IRQ_CPU_DMA0 (IRQ_BASE_CPU + IRQ_DMA0_LEVEL) -#define IRQ_CPU_DMA1 (IRQ_BASE_CPU + IRQ_DMA1_LEVEL) -#define IRQ_CPU_DMA2 (IRQ_BASE_CPU + IRQ_DMA2_LEVEL) -#define IRQ_CPU_DMA3 (IRQ_BASE_CPU + IRQ_DMA3_LEVEL) -#define IRQ_CPU_DMA4 (IRQ_BASE_CPU + IRQ_DMA4_LEVEL) -#define IRQ_CPU_DMA5 (IRQ_BASE_CPU + IRQ_DMA5_LEVEL) -#define IRQ_CPU_DMA6 (IRQ_BASE_CPU + IRQ_DMA6_LEVEL) -#define IRQ_CPU_DMA7 (IRQ_BASE_CPU + IRQ_DMA7_LEVEL) -#define IRQ_CPU_EXTERNAL0 (IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL) -#define IRQ_CPU_EXTERNAL1 (IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL) -#define IRQ_CPU_EXTERNAL2 (IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL) -#define IRQ_CPU_EXTERNAL3 (IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL) -#define IRQ_CPU_EXTERNAL4 (IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL) -#define IRQ_CPU_EXTERNAL5 (IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL) -#define IRQ_CPU_EXTERNAL6 (IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL) -#define IRQ_CPU_EXTERNAL7 (IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL) - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_CPU_IRQS_H */ diff --git a/include/asm-frv/cpumask.h b/include/asm-frv/cpumask.h deleted file mode 100644 index d999c20..0000000 --- a/include/asm-frv/cpumask.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_CPUMASK_H -#define _ASM_CPUMASK_H - -#include - -#endif /* _ASM_CPUMASK_H */ diff --git a/include/asm-frv/cputime.h b/include/asm-frv/cputime.h deleted file mode 100644 index f6c373a..0000000 --- a/include/asm-frv/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_CPUTIME_H -#define _ASM_CPUTIME_H - -#include - -#endif /* _ASM_CPUTIME_H */ diff --git a/include/asm-frv/current.h b/include/asm-frv/current.h deleted file mode 100644 index 86b0274..0000000 --- a/include/asm-frv/current.h +++ /dev/null @@ -1,30 +0,0 @@ -/* current.h: FRV current task pointer - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_CURRENT_H -#define _ASM_CURRENT_H - -#ifndef __ASSEMBLY__ - -/* - * dedicate GR29 to keeping the current task pointer - */ -register struct task_struct *current asm("gr29"); - -#define get_current() current - -#else - -#define CURRENT gr29 - -#endif - -#endif /* _ASM_CURRENT_H */ diff --git a/include/asm-frv/delay.h b/include/asm-frv/delay.h deleted file mode 100644 index 597b4eb..0000000 --- a/include/asm-frv/delay.h +++ /dev/null @@ -1,50 +0,0 @@ -/* delay.h: FRV delay code - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_DELAY_H -#define _ASM_DELAY_H - -#include -#include - -/* - * delay loop - runs at __core_clock_speed_HZ / 2 [there are 2 insns in the loop] - */ -extern unsigned long __delay_loops_MHz; - -static inline void __delay(unsigned long loops) -{ - asm volatile("1: subicc %0,#1,%0,icc0 \n" - " bnc icc0,#2,1b \n" - : "=r" (loops) - : "0" (loops) - : "icc0" - ); -} - -/* - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ - -extern unsigned long loops_per_jiffy; - -static inline void udelay(unsigned long usecs) -{ - __delay(usecs * __delay_loops_MHz); -} - -#define ndelay(n) udelay((n) * 5) - -#endif /* _ASM_DELAY_H */ diff --git a/include/asm-frv/device.h b/include/asm-frv/device.h deleted file mode 100644 index d8f9872..0000000 --- a/include/asm-frv/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-frv/div64.h b/include/asm-frv/div64.h deleted file mode 100644 index 6cd978c..0000000 --- a/include/asm-frv/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-frv/dm9000.h b/include/asm-frv/dm9000.h deleted file mode 100644 index f6f48fd..0000000 --- a/include/asm-frv/dm9000.h +++ /dev/null @@ -1,37 +0,0 @@ -/* dm9000.h: Davicom DM9000 adapter configuration - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_DM9000_H -#define _ASM_DM9000_H - -#include - -#define DM9000_ARCH_IOBASE (__region_CS6 + 0x300) -#define DM9000_ARCH_IRQ IRQ_CPU_EXTERNAL3 /* XIRQ #3 (shared with FPGA) */ -#undef DM9000_ARCH_IRQ_ACTLOW /* IRQ pin active high */ -#define DM9000_ARCH_BUS_INFO "CS6#+0x300" /* bus info for ethtool */ - -#undef __is_PCI_IO -#define __is_PCI_IO(addr) 0 /* not PCI */ - -#undef inl -#define inl(addr) \ -({ \ - unsigned long __ioaddr = (unsigned long) addr; \ - uint32_t x = readl(__ioaddr); \ - ((x & 0xff) << 24) | ((x & 0xff00) << 8) | ((x >> 8) & 0xff00) | ((x >> 24) & 0xff); \ -}) - -#undef insl -#define insl(a,b,l) __insl(a,b,l,0) /* don't byte-swap */ - - -#endif /* _ASM_DM9000_H */ diff --git a/include/asm-frv/dma-mapping.h b/include/asm-frv/dma-mapping.h deleted file mode 100644 index b289887..0000000 --- a/include/asm-frv/dma-mapping.h +++ /dev/null @@ -1,174 +0,0 @@ -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H - -#include -#include -#include -#include -#include - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) - -extern unsigned long __nongprelbss dma_coherent_mem_start; -extern unsigned long __nongprelbss dma_coherent_mem_end; - -void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); - -/* - * Map a single buffer of the indicated size for DMA in streaming mode. - * The 32-bit bus address to use is returned. - * - * Once the device is given the dma address, the device owns this memory - * until either pci_unmap_single or pci_dma_sync_single is performed. - */ -extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction); - -/* - * Unmap a single streaming mode DMA translation. The dma_addr and size - * must match what was provided for in a previous pci_map_single call. All - * other usages are undefined. - * - * After this call, reads by the cpu to the buffer are guarenteed to see - * whatever the device wrote there. - */ -static inline -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -/* - * Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scather-gather version of the - * above pci_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are - * the same here. - */ -extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction); - -/* - * Unmap a set of streaming mode DMA translations. - * Again, cpu read rules concerning calls here are the same as for - * pci_unmap_single() above. - */ -static inline -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -extern -dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, - size_t size, enum dma_data_direction direction); - -static inline -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - - -static inline -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ -} - -static inline -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -static inline -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ -} - -static inline -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -static inline -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ -} - -static inline -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -static inline -int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return 0; -} - -static inline -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -static inline -int dma_set_mask(struct device *dev, u64 mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - - return 0; -} - -static inline -int dma_get_cache_alignment(void) -{ - return 1 << L1_CACHE_SHIFT; -} - -#define dma_is_consistent(d, h) (1) - -static inline -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -#endif /* _ASM_DMA_MAPPING_H */ diff --git a/include/asm-frv/dma.h b/include/asm-frv/dma.h deleted file mode 100644 index 683c47d..0000000 --- a/include/asm-frv/dma.h +++ /dev/null @@ -1,125 +0,0 @@ -/* dma.h: FRV DMA controller management - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -//#define DMA_DEBUG 1 - -#include - -#undef MAX_DMA_CHANNELS /* don't use kernel/dma.c */ - -/* under 2.4 this is actually needed by the new bootmem allocator */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/* - * FRV DMA controller management - */ -typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data); - -extern void frv_dma_init(void); - -extern int frv_dma_open(const char *devname, - unsigned long dmamask, - int dmacap, - dma_irq_handler_t handler, - unsigned long irq_flags, - void *data); - -/* channels required */ -#define FRV_DMA_MASK_ANY ULONG_MAX /* any channel */ - -/* capabilities required */ -#define FRV_DMA_CAP_DREQ 0x01 /* DMA request pin */ -#define FRV_DMA_CAP_DACK 0x02 /* DMA ACK pin */ -#define FRV_DMA_CAP_DONE 0x04 /* DMA done pin */ - -extern void frv_dma_close(int dma); - -extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr); - -extern void frv_dma_start(int dma, - unsigned long sba, unsigned long dba, - unsigned long pix, unsigned long six, unsigned long bcl); - -extern void frv_dma_restart_circular(int dma, unsigned long six); - -extern void frv_dma_stop(int dma); - -extern int is_frv_dma_interrupting(int dma); - -extern void frv_dma_dump(int dma); - -extern void frv_dma_status_clear(int dma); - -#define FRV_DMA_NCHANS 8 -#define FRV_DMA_4CHANS 4 -#define FRV_DMA_8CHANS 8 - -#define DMAC_CCFRx 0x00 /* channel configuration reg */ -#define DMAC_CCFRx_CM_SHIFT 16 -#define DMAC_CCFRx_CM_DA 0x00000000 -#define DMAC_CCFRx_CM_SCA 0x00010000 -#define DMAC_CCFRx_CM_DCA 0x00020000 -#define DMAC_CCFRx_CM_2D 0x00030000 -#define DMAC_CCFRx_ATS_SHIFT 8 -#define DMAC_CCFRx_RS_INTERN 0x00000000 -#define DMAC_CCFRx_RS_EXTERN 0x00000001 -#define DMAC_CCFRx_RS_SHIFT 0 - -#define DMAC_CSTRx 0x08 /* channel status reg */ -#define DMAC_CSTRx_FS 0x0000003f -#define DMAC_CSTRx_NE 0x00000100 -#define DMAC_CSTRx_FED 0x00000200 -#define DMAC_CSTRx_WER 0x00000800 -#define DMAC_CSTRx_RER 0x00001000 -#define DMAC_CSTRx_CE 0x00002000 -#define DMAC_CSTRx_INT 0x00800000 -#define DMAC_CSTRx_BUSY 0x80000000 - -#define DMAC_CCTRx 0x10 /* channel control reg */ -#define DMAC_CCTRx_DSIZ_1 0x00000000 -#define DMAC_CCTRx_DSIZ_2 0x00000001 -#define DMAC_CCTRx_DSIZ_4 0x00000002 -#define DMAC_CCTRx_DSIZ_32 0x00000005 -#define DMAC_CCTRx_DAU_HOLD 0x00000000 -#define DMAC_CCTRx_DAU_INC 0x00000010 -#define DMAC_CCTRx_DAU_DEC 0x00000020 -#define DMAC_CCTRx_SSIZ_1 0x00000000 -#define DMAC_CCTRx_SSIZ_2 0x00000100 -#define DMAC_CCTRx_SSIZ_4 0x00000200 -#define DMAC_CCTRx_SSIZ_32 0x00000500 -#define DMAC_CCTRx_SAU_HOLD 0x00000000 -#define DMAC_CCTRx_SAU_INC 0x00001000 -#define DMAC_CCTRx_SAU_DEC 0x00002000 -#define DMAC_CCTRx_FC 0x08000000 -#define DMAC_CCTRx_ICE 0x10000000 -#define DMAC_CCTRx_IE 0x40000000 -#define DMAC_CCTRx_ACT 0x80000000 - -#define DMAC_SBAx 0x18 /* source base address reg */ -#define DMAC_DBAx 0x20 /* data base address reg */ -#define DMAC_PIXx 0x28 /* primary index reg */ -#define DMAC_SIXx 0x30 /* secondary index reg */ -#define DMAC_BCLx 0x38 /* byte count limit reg */ -#define DMAC_APRx 0x40 /* alternate pointer reg */ - -/* - * required for PCI + MODULES - */ -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_DMA_H */ diff --git a/include/asm-frv/elf.h b/include/asm-frv/elf.h deleted file mode 100644 index 7279ec07d..0000000 --- a/include/asm-frv/elf.h +++ /dev/null @@ -1,142 +0,0 @@ -/* elf.h: FR-V ELF definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-m68knommu/elf.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_ELF_H -#define __ASM_ELF_H - -#include -#include - -struct elf32_hdr; - -/* - * ELF header e_flags defines. - */ -#define EF_FRV_GPR_MASK 0x00000003 /* mask for # of gprs */ -#define EF_FRV_GPR32 0x00000001 /* Only uses GR on 32-register */ -#define EF_FRV_GPR64 0x00000002 /* Only uses GR on 64-register */ -#define EF_FRV_FPR_MASK 0x0000000c /* mask for # of fprs */ -#define EF_FRV_FPR32 0x00000004 /* Only uses FR on 32-register */ -#define EF_FRV_FPR64 0x00000008 /* Only uses FR on 64-register */ -#define EF_FRV_FPR_NONE 0x0000000C /* Uses software floating-point */ -#define EF_FRV_DWORD_MASK 0x00000030 /* mask for dword support */ -#define EF_FRV_DWORD_YES 0x00000010 /* Assumes stack aligned to 8-byte boundaries. */ -#define EF_FRV_DWORD_NO 0x00000020 /* Assumes stack aligned to 4-byte boundaries. */ -#define EF_FRV_DOUBLE 0x00000040 /* Uses double instructions. */ -#define EF_FRV_MEDIA 0x00000080 /* Uses media instructions. */ -#define EF_FRV_PIC 0x00000100 /* Uses position independent code. */ -#define EF_FRV_NON_PIC_RELOCS 0x00000200 /* Does not use position Independent code. */ -#define EF_FRV_MULADD 0x00000400 /* -mmuladd */ -#define EF_FRV_BIGPIC 0x00000800 /* -fPIC */ -#define EF_FRV_LIBPIC 0x00001000 /* -mlibrary-pic */ -#define EF_FRV_G0 0x00002000 /* -G 0, no small data ptr */ -#define EF_FRV_NOPACK 0x00004000 /* -mnopack */ -#define EF_FRV_FDPIC 0x00008000 /* -mfdpic */ -#define EF_FRV_CPU_MASK 0xff000000 /* specific cpu bits */ -#define EF_FRV_CPU_GENERIC 0x00000000 /* Set CPU type is FR-V */ -#define EF_FRV_CPU_FR500 0x01000000 /* Set CPU type is FR500 */ -#define EF_FRV_CPU_FR300 0x02000000 /* Set CPU type is FR300 */ -#define EF_FRV_CPU_SIMPLE 0x03000000 /* SIMPLE */ -#define EF_FRV_CPU_TOMCAT 0x04000000 /* Tomcat, FR500 prototype */ -#define EF_FRV_CPU_FR400 0x05000000 /* Set CPU type is FR400 */ -#define EF_FRV_CPU_FR550 0x06000000 /* Set CPU type is FR550 */ -#define EF_FRV_CPU_FR405 0x07000000 /* Set CPU type is FR405 */ -#define EF_FRV_CPU_FR450 0x08000000 /* Set CPU type is FR450 */ - -/* - * FR-V ELF relocation types - */ - - -/* - * ELF register definitions.. - */ -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fpmedia_regs elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -extern int elf_check_arch(const struct elf32_hdr *hdr); - -#define elf_check_fdpic(x) ((x)->e_flags & EF_FRV_FDPIC && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS)) -#define elf_check_const_displacement(x) ((x)->e_flags & EF_FRV_PIC) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2MSB -#define ELF_ARCH EM_FRV - -#define ELF_PLAT_INIT(_r) \ -do { \ - __kernel_frame0_ptr->gr16 = 0; \ - __kernel_frame0_ptr->gr17 = 0; \ - __kernel_frame0_ptr->gr18 = 0; \ - __kernel_frame0_ptr->gr19 = 0; \ - __kernel_frame0_ptr->gr20 = 0; \ - __kernel_frame0_ptr->gr21 = 0; \ - __kernel_frame0_ptr->gr22 = 0; \ - __kernel_frame0_ptr->gr23 = 0; \ - __kernel_frame0_ptr->gr24 = 0; \ - __kernel_frame0_ptr->gr25 = 0; \ - __kernel_frame0_ptr->gr26 = 0; \ - __kernel_frame0_ptr->gr27 = 0; \ - __kernel_frame0_ptr->gr29 = 0; \ -} while(0) - -#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr) \ -do { \ - __kernel_frame0_ptr->gr16 = _exec_map_addr; \ - __kernel_frame0_ptr->gr17 = _interp_map_addr; \ - __kernel_frame0_ptr->gr18 = _dynamic_addr; \ - __kernel_frame0_ptr->gr19 = 0; \ - __kernel_frame0_ptr->gr20 = 0; \ - __kernel_frame0_ptr->gr21 = 0; \ - __kernel_frame0_ptr->gr22 = 0; \ - __kernel_frame0_ptr->gr23 = 0; \ - __kernel_frame0_ptr->gr24 = 0; \ - __kernel_frame0_ptr->gr25 = 0; \ - __kernel_frame0_ptr->gr26 = 0; \ - __kernel_frame0_ptr->gr27 = 0; \ - __kernel_frame0_ptr->gr29 = 0; \ -} while(0) - -#define USE_ELF_CORE_DUMP -#define ELF_FDPIC_CORE_EFLAGS EF_FRV_FDPIC -#define ELF_EXEC_PAGESIZE 16384 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE 0x08000000UL - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) - -#endif diff --git a/include/asm-frv/emergency-restart.h b/include/asm-frv/emergency-restart.h deleted file mode 100644 index 108d8c4..0000000 --- a/include/asm-frv/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-frv/errno.h b/include/asm-frv/errno.h deleted file mode 100644 index d010795..0000000 --- a/include/asm-frv/errno.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_ERRNO_H -#define _ASM_ERRNO_H - -#include - -#endif /* _ASM_ERRNO_H */ - diff --git a/include/asm-frv/fb.h b/include/asm-frv/fb.h deleted file mode 100644 index c7df380..0000000 --- a/include/asm-frv/fb.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-frv/fcntl.h b/include/asm-frv/fcntl.h deleted file mode 100644 index 46ab12d..0000000 --- a/include/asm-frv/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-frv/fpu.h b/include/asm-frv/fpu.h deleted file mode 100644 index d73c60b..0000000 --- a/include/asm-frv/fpu.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_FPU_H -#define __ASM_FPU_H - - -/* - * MAX floating point unit state size (FSAVE/FRESTORE) - */ - -#define kernel_fpu_end() do { asm volatile("bar":::"memory"); preempt_enable(); } while(0) - -#endif /* __ASM_FPU_H */ diff --git a/include/asm-frv/ftrace.h b/include/asm-frv/ftrace.h deleted file mode 100644 index 40a8c17..0000000 --- a/include/asm-frv/ftrace.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-frv/futex.h b/include/asm-frv/futex.h deleted file mode 100644 index 08b3d1d..0000000 --- a/include/asm-frv/futex.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#ifdef __KERNEL__ - -#include -#include -#include - -extern int futex_atomic_op_inuser(int encoded_op, int __user *uaddr); - -static inline int -futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) -{ - return -ENOSYS; -} - -#endif -#endif diff --git a/include/asm-frv/gdb-stub.h b/include/asm-frv/gdb-stub.h deleted file mode 100644 index 24f9738..0000000 --- a/include/asm-frv/gdb-stub.h +++ /dev/null @@ -1,140 +0,0 @@ -/* gdb-stub.h: FRV GDB stub - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_GDB_STUB_H -#define __ASM_GDB_STUB_H - -#undef GDBSTUB_DEBUG_PROTOCOL - -#include - -/* - * important register numbers in GDB protocol - * - GR0, GR1, GR2, GR3, GR4, GR5, GR6, GR7, - * - GR8, GR9, GR10, GR11, GR12, GR13, GR14, GR15, - * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23, - * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31, - * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39, - * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47, - * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55, - * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63, - * - FR0, FR1, FR2, FR3, FR4, FR5, FR6, FR7, - * - FR8, FR9, FR10, FR11, FR12, FR13, FR14, FR15, - * - FR16, FR17, FR18, FR19, FR20, FR21, FR22, FR23, - * - FR24, FR25, FR26, FR27, FR28, FR29, FR30, FR31, - * - FR32, FR33, FR34, FR35, FR36, FR37, FR38, FR39, - * - FR40, FR41, FR42, FR43, FR44, FR45, FR46, FR47, - * - FR48, FR49, FR50, FR51, FR52, FR53, FR54, FR55, - * - FR56, FR57, FR58, FR59, FR60, FR61, FR62, FR63, - * - PC, PSR, CCR, CCCR, - * - _X132, _X133, _X134 - * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3, - * - SCR0, SCR1, SCR2, SCR3, - * - LR, LCR, - * - IACC0H, IACC0L, - * - FSR0, - * - ACC0, ACC1, ACC2, ACC3, ACC4, ACC5, ACC6, ACC7, - * - ACCG0123, ACCG4567, - * - MSR0, MSR1, - * - GNER0, GNER1, - * - FNER0, FNER1, - */ -#define GDB_REG_GR(N) (N) -#define GDB_REG_FR(N) (64+(N)) -#define GDB_REG_PC 128 -#define GDB_REG_PSR 129 -#define GDB_REG_CCR 130 -#define GDB_REG_CCCR 131 -#define GDB_REG_TBR 135 -#define GDB_REG_BRR 136 -#define GDB_REG_DBAR(N) (137+(N)) -#define GDB_REG_SCR(N) (141+(N)) -#define GDB_REG_LR 145 -#define GDB_REG_LCR 146 -#define GDB_REG_FSR0 149 -#define GDB_REG_ACC(N) (150+(N)) -#define GDB_REG_ACCG(N) (158+(N)/4) -#define GDB_REG_MSR(N) (160+(N)) -#define GDB_REG_GNER(N) (162+(N)) -#define GDB_REG_FNER(N) (164+(N)) - -#define GDB_REG_SP GDB_REG_GR(1) -#define GDB_REG_FP GDB_REG_GR(2) - -#ifndef _LANGUAGE_ASSEMBLY - -/* - * Prototypes - */ -extern void show_registers_only(struct pt_regs *regs); - -extern void gdbstub_init(void); -extern void gdbstub(int type); -extern void gdbstub_exit(int status); - -extern void gdbstub_io_init(void); -extern void gdbstub_set_baud(unsigned baud); -extern int gdbstub_rx_char(unsigned char *_ch, int nonblock); -extern void gdbstub_tx_char(unsigned char ch); -extern void gdbstub_tx_flush(void); -extern void gdbstub_do_rx(void); - -extern asmlinkage void __debug_stub_init_break(void); -extern asmlinkage void __break_hijack_kernel_event(void); -extern asmlinkage void __break_hijack_kernel_event_breaks_here(void); -extern asmlinkage void start_kernel(void); - -extern asmlinkage void gdbstub_rx_handler(void); -extern asmlinkage void gdbstub_rx_irq(void); -extern asmlinkage void gdbstub_intercept(void); - -extern uint32_t __entry_usertrap_table[]; -extern uint32_t __entry_kerneltrap_table[]; - -extern volatile u8 gdbstub_rx_buffer[PAGE_SIZE]; -extern volatile u32 gdbstub_rx_inp; -extern volatile u32 gdbstub_rx_outp; -extern volatile u8 gdbstub_rx_overflow; -extern u8 gdbstub_rx_unget; - -extern void gdbstub_printk(const char *fmt, ...); -extern void debug_to_serial(const char *p, int n); -extern void console_set_baud(unsigned baud); - -#ifdef GDBSTUB_DEBUG_PROTOCOL -#define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__) -#else -#define gdbstub_proto(FMT,...) ({ 0; }) -#endif - -/* - * we dedicate GR31 to keeping a pointer to the gdbstub exception frame - * - gr31 is destroyed on entry to the gdbstub if !MMU - * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU - */ -register struct frv_frame0 *__debug_frame0 asm("gr31"); - -#define __debug_frame (&__debug_frame0->regs) -#define __debug_user_context (&__debug_frame0->uc) -#define __debug_regs (&__debug_frame0->debug) -#define __debug_reg(X) ((unsigned long *) ((unsigned long) &__debug_frame0 + (X))) - -struct frv_debug_status { - unsigned long bpsr; - unsigned long dcr; - unsigned long brr; - unsigned long nmar; -}; - -extern struct frv_debug_status __debug_status; - -#endif /* _LANGUAGE_ASSEMBLY */ -#endif /* __ASM_GDB_STUB_H */ diff --git a/include/asm-frv/gpio-regs.h b/include/asm-frv/gpio-regs.h deleted file mode 100644 index 9edf5d5..0000000 --- a/include/asm-frv/gpio-regs.h +++ /dev/null @@ -1,116 +0,0 @@ -/* gpio-regs.h: on-chip general purpose I/O registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_GPIO_REGS -#define _ASM_GPIO_REGS - -#define __reg(ADDR) (*(volatile unsigned long *)(ADDR)) - -#define __get_PDR() ({ __reg(0xfeff0400); }) -#define __set_PDR(V) do { __reg(0xfeff0400) = (V); mb(); } while(0) - -#define __get_GPDR() ({ __reg(0xfeff0408); }) -#define __set_GPDR(V) do { __reg(0xfeff0408) = (V); mb(); } while(0) - -#define __get_SIR() ({ __reg(0xfeff0410); }) -#define __set_SIR(V) do { __reg(0xfeff0410) = (V); mb(); } while(0) - -#define __get_SOR() ({ __reg(0xfeff0418); }) -#define __set_SOR(V) do { __reg(0xfeff0418) = (V); mb(); } while(0) - -#define __set_PDSR(V) do { __reg(0xfeff0420) = (V); mb(); } while(0) - -#define __set_PDCR(V) do { __reg(0xfeff0428) = (V); mb(); } while(0) - -#define __get_RSTR() ({ __reg(0xfeff0500); }) -#define __set_RSTR(V) do { __reg(0xfeff0500) = (V); mb(); } while(0) - - - -/* PDR definitions */ -#define PDR_GPIO_DATA(X) (1 << (X)) - -/* GPDR definitions */ -#define GPDR_INPUT 0 -#define GPDR_OUTPUT 1 -#define GPDR_DREQ0_BIT 0x00001000 -#define GPDR_DREQ1_BIT 0x00008000 -#define GPDR_DREQ2_BIT 0x00040000 -#define GPDR_DREQ3_BIT 0x00080000 -#define GPDR_DREQ4_BIT 0x00004000 -#define GPDR_DREQ5_BIT 0x00020000 -#define GPDR_DREQ6_BIT 0x00100000 -#define GPDR_DREQ7_BIT 0x00200000 -#define GPDR_DACK0_BIT 0x00002000 -#define GPDR_DACK1_BIT 0x00010000 -#define GPDR_DACK2_BIT 0x00100000 -#define GPDR_DACK3_BIT 0x00200000 -#define GPDR_DONE0_BIT 0x00004000 -#define GPDR_DONE1_BIT 0x00020000 -#define GPDR_GPIO_DIR(X,D) ((D) << (X)) - -/* SIR definitions */ -#define SIR_GPIO_INPUT 0 -#define SIR_DREQ7_INPUT 0x00200000 -#define SIR_DREQ6_INPUT 0x00100000 -#define SIR_DREQ3_INPUT 0x00080000 -#define SIR_DREQ2_INPUT 0x00040000 -#define SIR_DREQ5_INPUT 0x00020000 -#define SIR_DREQ1_INPUT 0x00008000 -#define SIR_DREQ4_INPUT 0x00004000 -#define SIR_DREQ0_INPUT 0x00001000 -#define SIR_RXD1_INPUT 0x00000400 -#define SIR_CTS0_INPUT 0x00000100 -#define SIR_RXD0_INPUT 0x00000040 -#define SIR_GATE1_INPUT 0x00000020 -#define SIR_GATE0_INPUT 0x00000010 -#define SIR_IRQ3_INPUT 0x00000008 -#define SIR_IRQ2_INPUT 0x00000004 -#define SIR_IRQ1_INPUT 0x00000002 -#define SIR_IRQ0_INPUT 0x00000001 -#define SIR_DREQ_BITS (SIR_DREQ0_INPUT | SIR_DREQ1_INPUT | \ - SIR_DREQ2_INPUT | SIR_DREQ3_INPUT | \ - SIR_DREQ4_INPUT | SIR_DREQ5_INPUT | \ - SIR_DREQ6_INPUT | SIR_DREQ7_INPUT) - -/* SOR definitions */ -#define SOR_GPIO_OUTPUT 0 -#define SOR_DACK3_OUTPUT 0x00200000 -#define SOR_DACK2_OUTPUT 0x00100000 -#define SOR_DONE1_OUTPUT 0x00020000 -#define SOR_DACK1_OUTPUT 0x00010000 -#define SOR_DONE0_OUTPUT 0x00004000 -#define SOR_DACK0_OUTPUT 0x00002000 -#define SOR_TXD1_OUTPUT 0x00000800 -#define SOR_RTS0_OUTPUT 0x00000200 -#define SOR_TXD0_OUTPUT 0x00000080 -#define SOR_TOUT1_OUTPUT 0x00000020 -#define SOR_TOUT0_OUTPUT 0x00000010 -#define SOR_DONE_BITS (SOR_DONE0_OUTPUT | SOR_DONE1_OUTPUT) -#define SOR_DACK_BITS (SOR_DACK0_OUTPUT | SOR_DACK1_OUTPUT | \ - SOR_DACK2_OUTPUT | SOR_DACK3_OUTPUT) - -/* PDSR definitions */ -#define PDSR_UNCHANGED 0 -#define PDSR_SET_BIT(X) (1 << (X)) - -/* PDCR definitions */ -#define PDCR_UNCHANGED 0 -#define PDCR_CLEAR_BIT(X) (1 << (X)) - -/* RSTR definitions */ -/* Read Only */ -#define RSTR_POWERON 0x00000400 -#define RSTR_SOFTRESET_STATUS 0x00000100 -/* Write Only */ -#define RSTR_SOFTRESET 0x00000001 - -#endif /* _ASM_GPIO_REGS */ diff --git a/include/asm-frv/hardirq.h b/include/asm-frv/hardirq.h deleted file mode 100644 index fc47515..0000000 --- a/include/asm-frv/hardirq.h +++ /dev/null @@ -1,35 +0,0 @@ -/* hardirq.h: FRV hardware IRQ management - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASM_HARDIRQ_H -#define __ASM_HARDIRQ_H - -#include -#include - -typedef struct { - unsigned int __softirq_pending; - unsigned long idle_timestamp; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#ifdef CONFIG_SMP -#error SMP not available on FR-V -#endif /* CONFIG_SMP */ - -extern atomic_t irq_err_count; -static inline void ack_bad_irq(int irq) -{ - atomic_inc(&irq_err_count); -} - -#endif diff --git a/include/asm-frv/highmem.h b/include/asm-frv/highmem.h deleted file mode 100644 index 68e4677..0000000 --- a/include/asm-frv/highmem.h +++ /dev/null @@ -1,182 +0,0 @@ -/* highmem.h: virtual kernel memory mappings for high memory - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-i386/highmem.h - * - * See Documentation/frv/mmu-layout.txt for more information. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -#define NR_TLB_LINES 64 /* number of lines in the TLB */ - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -#ifdef CONFIG_DEBUG_HIGHMEM -#define HIGHMEM_DEBUG 1 -#else -#define HIGHMEM_DEBUG 0 -#endif - -/* declarations for highmem.c */ -extern unsigned long highstart_pfn, highend_pfn; - -#define kmap_prot PAGE_KERNEL -#define kmap_pte ______kmap_pte_in_TLB -extern pte_t *pkmap_page_table; - -#define flush_cache_kmaps() do { } while (0) - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - */ -#define LAST_PKMAP PTRS_PER_PTE -#define LAST_PKMAP_MASK (LAST_PKMAP - 1) -#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -extern void *kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -extern void *kmap(struct page *page); -extern void kunmap(struct page *page); - -extern struct page *kmap_atomic_to_page(void *ptr); - -#endif /* !__ASSEMBLY__ */ - -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -#define KMAP_ATOMIC_CACHE_DAMR 8 - -#ifndef __ASSEMBLY__ - -#define __kmap_atomic_primary(type, paddr, ampr) \ -({ \ - unsigned long damlr, dampr; \ - \ - dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \ - \ - if (type != __KM_CACHE) \ - asm volatile("movgs %0,dampr"#ampr :: "r"(dampr) : "memory"); \ - else \ - asm volatile("movgs %0,iampr"#ampr"\n" \ - "movgs %0,dampr"#ampr"\n" \ - :: "r"(dampr) : "memory" \ - ); \ - \ - asm("movsg damlr"#ampr",%0" : "=r"(damlr)); \ - \ - /*printk("DAMR"#ampr": PRIM sl=%d L=%08lx P=%08lx\n", type, damlr, dampr);*/ \ - \ - (void *) damlr; \ -}) - -#define __kmap_atomic_secondary(slot, paddr) \ -({ \ - unsigned long damlr = KMAP_ATOMIC_SECONDARY_FRAME + (slot) * PAGE_SIZE; \ - unsigned long dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \ - \ - asm volatile("movgs %0,tplr \n" \ - "movgs %1,tppr \n" \ - "tlbpr %0,gr0,#2,#1" \ - : : "r"(damlr), "r"(dampr) : "memory"); \ - \ - /*printk("TLB: SECN sl=%d L=%08lx P=%08lx\n", slot, damlr, dampr);*/ \ - \ - (void *) damlr; \ -}) - -static inline void *kmap_atomic(struct page *page, enum km_type type) -{ - unsigned long paddr; - - pagefault_disable(); - debug_kmap_atomic(type); - paddr = page_to_phys(page); - - switch (type) { - case 0: return __kmap_atomic_primary(0, paddr, 2); - case 1: return __kmap_atomic_primary(1, paddr, 3); - case 2: return __kmap_atomic_primary(2, paddr, 4); - case 3: return __kmap_atomic_primary(3, paddr, 5); - case 4: return __kmap_atomic_primary(4, paddr, 6); - case 5: return __kmap_atomic_primary(5, paddr, 7); - case 6: return __kmap_atomic_primary(6, paddr, 8); - case 7: return __kmap_atomic_primary(7, paddr, 9); - case 8: return __kmap_atomic_primary(8, paddr, 10); - - case 9 ... 9 + NR_TLB_LINES - 1: - return __kmap_atomic_secondary(type - 9, paddr); - - default: - BUG(); - return NULL; - } -} - -#define __kunmap_atomic_primary(type, ampr) \ -do { \ - asm volatile("movgs gr0,dampr"#ampr"\n" ::: "memory"); \ - if (type == __KM_CACHE) \ - asm volatile("movgs gr0,iampr"#ampr"\n" ::: "memory"); \ -} while(0) - -#define __kunmap_atomic_secondary(slot, vaddr) \ -do { \ - asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr) : "memory"); \ -} while(0) - -static inline void kunmap_atomic(void *kvaddr, enum km_type type) -{ - switch (type) { - case 0: __kunmap_atomic_primary(0, 2); break; - case 1: __kunmap_atomic_primary(1, 3); break; - case 2: __kunmap_atomic_primary(2, 4); break; - case 3: __kunmap_atomic_primary(3, 5); break; - case 4: __kunmap_atomic_primary(4, 6); break; - case 5: __kunmap_atomic_primary(5, 7); break; - case 6: __kunmap_atomic_primary(6, 8); break; - case 7: __kunmap_atomic_primary(7, 9); break; - case 8: __kunmap_atomic_primary(8, 10); break; - - case 9 ... 9 + NR_TLB_LINES - 1: - __kunmap_atomic_secondary(type - 9, kvaddr); - break; - - default: - BUG(); - } - pagefault_enable(); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-frv/hw_irq.h b/include/asm-frv/hw_irq.h deleted file mode 100644 index 522ad37..0000000 --- a/include/asm-frv/hw_irq.h +++ /dev/null @@ -1,16 +0,0 @@ -/* hw_irq.h: FR-V specific h/w IRQ stuff - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - - -#endif /* _ASM_HW_IRQ_H */ diff --git a/include/asm-frv/init.h b/include/asm-frv/init.h deleted file mode 100644 index 8b15838..0000000 --- a/include/asm-frv/init.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_INIT_H -#define _ASM_INIT_H - -#define __init __attribute__ ((__section__ (".text.init"))) -#define __initdata __attribute__ ((__section__ (".data.init"))) -/* For assembly routines */ -#define __INIT .section ".text.init",#alloc,#execinstr -#define __FINIT .previous -#define __INITDATA .section ".data.init",#alloc,#write - -#endif - diff --git a/include/asm-frv/io.h b/include/asm-frv/io.h deleted file mode 100644 index ca7475e..0000000 --- a/include/asm-frv/io.h +++ /dev/null @@ -1,392 +0,0 @@ -/* io.h: FRV I/O operations - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This gets interesting when talking to the PCI bus - the CPU is in big endian - * mode, the PCI bus is little endian and the hardware in the middle can do - * byte swapping - */ -#ifndef _ASM_IO_H -#define _ASM_IO_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -/* - * swap functions are sometimes needed to interface little-endian hardware - */ - -static inline unsigned short _swapw(unsigned short v) -{ - return ((v << 8) | (v >> 8)); -} - -static inline unsigned long _swapl(unsigned long v) -{ - return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); -} - -//#define __iormb() asm volatile("membar") -//#define __iowmb() asm volatile("membar") - -#define __raw_readb __builtin_read8 -#define __raw_readw __builtin_read16 -#define __raw_readl __builtin_read32 - -#define __raw_writeb(datum, addr) __builtin_write8(addr, datum) -#define __raw_writew(datum, addr) __builtin_write16(addr, datum) -#define __raw_writel(datum, addr) __builtin_write32(addr, datum) - -static inline void io_outsb(unsigned int addr, const void *buf, int len) -{ - unsigned long __ioaddr = (unsigned long) addr; - const uint8_t *bp = buf; - - while (len--) - __builtin_write8((volatile void __iomem *) __ioaddr, *bp++); -} - -static inline void io_outsw(unsigned int addr, const void *buf, int len) -{ - unsigned long __ioaddr = (unsigned long) addr; - const uint16_t *bp = buf; - - while (len--) - __builtin_write16((volatile void __iomem *) __ioaddr, (*bp++)); -} - -extern void __outsl_ns(unsigned int addr, const void *buf, int len); -extern void __outsl_sw(unsigned int addr, const void *buf, int len); -static inline void __outsl(unsigned int addr, const void *buf, int len, int swap) -{ - unsigned long __ioaddr = (unsigned long) addr; - - if (!swap) - __outsl_ns(__ioaddr, buf, len); - else - __outsl_sw(__ioaddr, buf, len); -} - -static inline void io_insb(unsigned long addr, void *buf, int len) -{ - uint8_t *bp = buf; - - while (len--) - *bp++ = __builtin_read8((volatile void __iomem *) addr); -} - -static inline void io_insw(unsigned long addr, void *buf, int len) -{ - uint16_t *bp = buf; - - while (len--) - *bp++ = __builtin_read16((volatile void __iomem *) addr); -} - -extern void __insl_ns(unsigned long addr, void *buf, int len); -extern void __insl_sw(unsigned long addr, void *buf, int len); -static inline void __insl(unsigned long addr, void *buf, int len, int swap) -{ - if (!swap) - __insl_ns(addr, buf, len); - else - __insl_sw(addr, buf, len); -} - -#define mmiowb() mb() - -/* - * make the short names macros so specific devices - * can override them as required - */ - -static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - memset((void __force *) addr, val, count); -} - -static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) -{ - memcpy(dst, (void __force *) src, count); -} - -static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - memcpy((void __force *) dst, src, count); -} - -static inline uint8_t inb(unsigned long addr) -{ - return __builtin_read8((void __iomem *)addr); -} - -static inline uint16_t inw(unsigned long addr) -{ - uint16_t ret = __builtin_read16((void __iomem *)addr); - - if (__is_PCI_IO(addr)) - ret = _swapw(ret); - - return ret; -} - -static inline uint32_t inl(unsigned long addr) -{ - uint32_t ret = __builtin_read32((void __iomem *)addr); - - if (__is_PCI_IO(addr)) - ret = _swapl(ret); - - return ret; -} - -static inline void outb(uint8_t datum, unsigned long addr) -{ - __builtin_write8((void __iomem *)addr, datum); -} - -static inline void outw(uint16_t datum, unsigned long addr) -{ - if (__is_PCI_IO(addr)) - datum = _swapw(datum); - __builtin_write16((void __iomem *)addr, datum); -} - -static inline void outl(uint32_t datum, unsigned long addr) -{ - if (__is_PCI_IO(addr)) - datum = _swapl(datum); - __builtin_write32((void __iomem *)addr, datum); -} - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x,addr) outb(x,addr) -#define outw_p(x,addr) outw(x,addr) -#define outl_p(x,addr) outl(x,addr) - -#define outsb(a,b,l) io_outsb(a,b,l) -#define outsw(a,b,l) io_outsw(a,b,l) -#define outsl(a,b,l) __outsl(a,b,l,0) - -#define insb(a,b,l) io_insb(a,b,l) -#define insw(a,b,l) io_insw(a,b,l) -#define insl(a,b,l) __insl(a,b,l,0) - -#define IO_SPACE_LIMIT 0xffffffff - -static inline uint8_t readb(const volatile void __iomem *addr) -{ - return __builtin_read8((__force void volatile __iomem *) addr); -} - -static inline uint16_t readw(const volatile void __iomem *addr) -{ - uint16_t ret = __builtin_read16((__force void volatile __iomem *)addr); - - if (__is_PCI_MEM(addr)) - ret = _swapw(ret); - return ret; -} - -static inline uint32_t readl(const volatile void __iomem *addr) -{ - uint32_t ret = __builtin_read32((__force void volatile __iomem *)addr); - - if (__is_PCI_MEM(addr)) - ret = _swapl(ret); - - return ret; -} - -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - -static inline void writeb(uint8_t datum, volatile void __iomem *addr) -{ - __builtin_write8(addr, datum); - if (__is_PCI_MEM(addr)) - __flush_PCI_writes(); -} - -static inline void writew(uint16_t datum, volatile void __iomem *addr) -{ - if (__is_PCI_MEM(addr)) - datum = _swapw(datum); - - __builtin_write16(addr, datum); - if (__is_PCI_MEM(addr)) - __flush_PCI_writes(); -} - -static inline void writel(uint32_t datum, volatile void __iomem *addr) -{ - if (__is_PCI_MEM(addr)) - datum = _swapl(datum); - - __builtin_write32(addr, datum); - if (__is_PCI_MEM(addr)) - __flush_PCI_writes(); -} - - -/* Values for nocacheflag and cmode */ -#define IOMAP_FULL_CACHING 0 -#define IOMAP_NOCACHE_SER 1 -#define IOMAP_NOCACHE_NONSER 2 -#define IOMAP_WRITETHROUGH 3 - -extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); - -static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} - -static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} - -static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} - -static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -#define ioremap_wc ioremap_nocache - -extern void iounmap(void volatile __iomem *addr); - -static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - return (void __iomem *) port; -} - -static inline void ioport_unmap(void __iomem *p) -{ -} - -static inline void flush_write_buffers(void) -{ - __asm__ __volatile__ ("membar" : : :"memory"); -} - -/* - * do appropriate I/O accesses for token type - */ -static inline unsigned int ioread8(void __iomem *p) -{ - return __builtin_read8(p); -} - -static inline unsigned int ioread16(void __iomem *p) -{ - uint16_t ret = __builtin_read16(p); - if (__is_PCI_addr(p)) - ret = _swapw(ret); - return ret; -} - -static inline unsigned int ioread32(void __iomem *p) -{ - uint32_t ret = __builtin_read32(p); - if (__is_PCI_addr(p)) - ret = _swapl(ret); - return ret; -} - -static inline void iowrite8(u8 val, void __iomem *p) -{ - __builtin_write8(p, val); - if (__is_PCI_MEM(p)) - __flush_PCI_writes(); -} - -static inline void iowrite16(u16 val, void __iomem *p) -{ - if (__is_PCI_addr(p)) - val = _swapw(val); - __builtin_write16(p, val); - if (__is_PCI_MEM(p)) - __flush_PCI_writes(); -} - -static inline void iowrite32(u32 val, void __iomem *p) -{ - if (__is_PCI_addr(p)) - val = _swapl(val); - __builtin_write32(p, val); - if (__is_PCI_MEM(p)) - __flush_PCI_writes(); -} - -static inline void ioread8_rep(void __iomem *p, void *dst, unsigned long count) -{ - io_insb((unsigned long) p, dst, count); -} - -static inline void ioread16_rep(void __iomem *p, void *dst, unsigned long count) -{ - io_insw((unsigned long) p, dst, count); -} - -static inline void ioread32_rep(void __iomem *p, void *dst, unsigned long count) -{ - __insl_ns((unsigned long) p, dst, count); -} - -static inline void iowrite8_rep(void __iomem *p, const void *src, unsigned long count) -{ - io_outsb((unsigned long) p, src, count); -} - -static inline void iowrite16_rep(void __iomem *p, const void *src, unsigned long count) -{ - io_outsw((unsigned long) p, src, count); -} - -static inline void iowrite32_rep(void __iomem *p, const void *src, unsigned long count) -{ - __outsl_ns((unsigned long) p, src, count); -} - -/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ -struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) -{ -} - - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IO_H */ diff --git a/include/asm-frv/ioctl.h b/include/asm-frv/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/include/asm-frv/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-frv/ioctls.h b/include/asm-frv/ioctls.h deleted file mode 100644 index d0c30e3..0000000 --- a/include/asm-frv/ioctls.h +++ /dev/null @@ -1,86 +0,0 @@ -#ifndef __ASM_IOCTLS_H__ -#define __ASM_IOCTLS_H__ - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* __ASM_IOCTLS_H__ */ - diff --git a/include/asm-frv/ipcbuf.h b/include/asm-frv/ipcbuf.h deleted file mode 100644 index b546f67..0000000 --- a/include/asm-frv/ipcbuf.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __ASM_IPCBUF_H__ -#define __ASM_IPCBUF_H__ - -/* - * The user_ipc_perm structure for FR-V architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_IPCBUF_H__ */ - diff --git a/include/asm-frv/irc-regs.h b/include/asm-frv/irc-regs.h deleted file mode 100644 index afa30ae..0000000 --- a/include/asm-frv/irc-regs.h +++ /dev/null @@ -1,53 +0,0 @@ -/* irc-regs.h: on-chip interrupt controller registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_IRC_REGS -#define _ASM_IRC_REGS - -#define __reg(ADDR) (*(volatile unsigned long *)(ADDR)) - -#define __get_TM0() ({ __reg(0xfeff9800); }) -#define __get_TM1() ({ __reg(0xfeff9808); }) -#define __set_TM1(V) do { __reg(0xfeff9808) = (V); mb(); } while(0) - -#define __set_TM1x(XI,V) \ -do { \ - int shift = (XI) * 2 + 16; \ - unsigned long tm1 = __reg(0xfeff9808); \ - tm1 &= ~(0x3 << shift); \ - tm1 |= (V) << shift; \ - __reg(0xfeff9808) = tm1; \ - mb(); \ -} while(0) - -#define __get_RS(C) ({ (__reg(0xfeff9810) >> ((C)+16)) & 1; }) - -#define __clr_RC(C) do { __reg(0xfeff9818) = 1 << ((C)+16); mb(); } while(0) - -#define __get_MASK(C) ({ (__reg(0xfeff9820) >> ((C)+16)) & 1; }) -#define __set_MASK(C) do { __reg(0xfeff9820) |= 1 << ((C)+16); mb(); } while(0) -#define __clr_MASK(C) do { __reg(0xfeff9820) &= ~(1 << ((C)+16)); mb(); } while(0) - -#define __get_MASK_all() __get_MASK(0) -#define __set_MASK_all() __set_MASK(0) -#define __clr_MASK_all() __clr_MASK(0) - -#define __get_IRL() ({ (__reg(0xfeff9828) >> 16) & 0xf; }) -#define __clr_IRL() do { __reg(0xfeff9828) = 0x100000; mb(); } while(0) - -#define __get_IRR(N) ({ __reg(0xfeff9840 + (N) * 8); }) -#define __set_IRR(N,V) do { __reg(0xfeff9840 + (N) * 8) = (V); } while(0) - -#define __get_IITMR(N) ({ __reg(0xfeff9880 + (N) * 8); }) -#define __set_IITMR(N,V) do { __reg(0xfeff9880 + (N) * 8) = (V); } while(0) - - -#endif /* _ASM_IRC_REGS */ diff --git a/include/asm-frv/irq.h b/include/asm-frv/irq.h deleted file mode 100644 index 3a66ebd..0000000 --- a/include/asm-frv/irq.h +++ /dev/null @@ -1,30 +0,0 @@ -/* irq.h: FRV IRQ definitions - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_IRQ_H_ -#define _ASM_IRQ_H_ - -#define NR_IRQS 48 -#define IRQ_BASE_CPU (0 * 16) -#define IRQ_BASE_FPGA (1 * 16) -#define IRQ_BASE_MB93493 (2 * 16) - -/* probe returns a 32-bit IRQ mask:-/ */ -#define MIN_PROBE_IRQ (NR_IRQS - 32) - -#ifndef __ASSEMBLY__ -static inline int irq_canonicalize(int irq) -{ - return irq; -} -#endif - -#endif /* _ASM_IRQ_H_ */ diff --git a/include/asm-frv/irq_regs.h b/include/asm-frv/irq_regs.h deleted file mode 100644 index d22e832..0000000 --- a/include/asm-frv/irq_regs.h +++ /dev/null @@ -1,27 +0,0 @@ -/* FRV per-CPU frame pointer holder - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_IRQ_REGS_H -#define _ASM_IRQ_REGS_H - -/* - * Per-cpu current frame pointer - the location of the last exception frame on - * the stack - * - on FRV, GR28 is dedicated to keeping a pointer to the current exception - * frame - */ -#define ARCH_HAS_OWN_IRQ_REGS - -#ifndef __ASSEMBLY__ -#define get_irq_regs() (__frame) -#endif - -#endif /* _ASM_IRQ_REGS_H */ diff --git a/include/asm-frv/kdebug.h b/include/asm-frv/kdebug.h deleted file mode 100644 index 6ece1b0..0000000 --- a/include/asm-frv/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-frv/kmap_types.h b/include/asm-frv/kmap_types.h deleted file mode 100644 index f8e16b2..0000000 --- a/include/asm-frv/kmap_types.h +++ /dev/null @@ -1,29 +0,0 @@ - -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - -enum km_type { - /* arch specific kmaps - change the numbers attached to these at your peril */ - __KM_CACHE, /* cache flush page attachment point */ - __KM_PGD, /* current page directory */ - __KM_ITLB_PTD, /* current instruction TLB miss page table lookup */ - __KM_DTLB_PTD, /* current data TLB miss page table lookup */ - - /* general kmaps */ - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif diff --git a/include/asm-frv/linkage.h b/include/asm-frv/linkage.h deleted file mode 100644 index 636c1bc..0000000 --- a/include/asm-frv/linkage.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .align 4 -#define __ALIGN_STR ".align 4" - -#endif diff --git a/include/asm-frv/local.h b/include/asm-frv/local.h deleted file mode 100644 index c27bdf0..0000000 --- a/include/asm-frv/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_LOCAL_H -#define _ASM_LOCAL_H - -#include - -#endif /* _ASM_LOCAL_H */ diff --git a/include/asm-frv/math-emu.h b/include/asm-frv/math-emu.h deleted file mode 100644 index 0c8f731..0000000 --- a/include/asm-frv/math-emu.h +++ /dev/null @@ -1,301 +0,0 @@ -#ifndef _ASM_MATH_EMU_H -#define _ASM_MATH_EMU_H - -#include -#include - -/* Status Register bits */ - -/* accrued exception bits */ -#define FPSR_AEXC_INEX 3 -#define FPSR_AEXC_DZ 4 -#define FPSR_AEXC_UNFL 5 -#define FPSR_AEXC_OVFL 6 -#define FPSR_AEXC_IOP 7 - -/* exception status bits */ -#define FPSR_EXC_INEX1 8 -#define FPSR_EXC_INEX2 9 -#define FPSR_EXC_DZ 10 -#define FPSR_EXC_UNFL 11 -#define FPSR_EXC_OVFL 12 -#define FPSR_EXC_OPERR 13 -#define FPSR_EXC_SNAN 14 -#define FPSR_EXC_BSUN 15 - -/* quotient byte, assumes big-endian, of course */ -#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1)) - -/* condition code bits */ -#define FPSR_CC_NAN 24 -#define FPSR_CC_INF 25 -#define FPSR_CC_Z 26 -#define FPSR_CC_NEG 27 - - -/* Control register bits */ - -/* rounding mode */ -#define FPCR_ROUND_RN 0 /* round to nearest/even */ -#define FPCR_ROUND_RZ 1 /* round to zero */ -#define FPCR_ROUND_RM 2 /* minus infinity */ -#define FPCR_ROUND_RP 3 /* plus infinity */ - -/* rounding precision */ -#define FPCR_PRECISION_X 0 /* long double */ -#define FPCR_PRECISION_S 1 /* double */ -#define FPCR_PRECISION_D 2 /* float */ - - -/* Flags to select the debugging output */ -#define PDECODE 0 -#define PEXECUTE 1 -#define PCONV 2 -#define PNORM 3 -#define PREGISTER 4 -#define PINSTR 5 -#define PUNIMPL 6 -#define PMOVEM 7 - -#define PMDECODE (1< -#include - -union fp_mant64 { - unsigned long long m64; - unsigned long m32[2]; -}; - -union fp_mant128 { - unsigned long long m64[2]; - unsigned long m32[4]; -}; - -/* internal representation of extended fp numbers */ -struct fp_ext { - unsigned char lowmant; - unsigned char sign; - unsigned short exp; - union fp_mant64 mant; -}; - -/* C representation of FPU registers */ -/* NOTE: if you change this, you have to change the assembler offsets - below and the size in , too */ -struct fp_data { - struct fp_ext fpreg[8]; - unsigned int fpcr; - unsigned int fpsr; - unsigned int fpiar; - unsigned short prec; - unsigned short rnd; - struct fp_ext temp[2]; -}; - -#if FPU_EMU_DEBUG -extern unsigned int fp_debugprint; - -#define dprint(bit, fmt, args...) ({ \ - if (fp_debugprint & (1 << (bit))) \ - printk(fmt, ## args); \ -}) -#else -#define dprint(bit, fmt, args...) -#endif - -#define uprint(str) ({ \ - static int __count = 3; \ - \ - if (__count > 0) { \ - printk("You just hit an unimplemented " \ - "fpu instruction (%s)\n", str); \ - printk("Please report this to ....\n"); \ - __count--; \ - } \ -}) - -#define FPDATA ((struct fp_data *)current->thread.fp) - -#else /* __ASSEMBLY__ */ - -#define FPDATA %a2 - -/* offsets from the base register to the floating point data in the task struct */ -#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0) -#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96) -#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100) -#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104) -#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108) -#define FPD_RND (TASK_THREAD+THREAD_FPREG+110) -#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112) -#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124) -#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136) - -/* offsets on the stack to access saved registers, - * these are only used during instruction decoding - * where we always know how deep we're on the stack. - */ -#define FPS_DO (PT_D0) -#define FPS_D1 (PT_D1) -#define FPS_D2 (PT_D2) -#define FPS_A0 (PT_A0) -#define FPS_A1 (PT_A1) -#define FPS_A2 (PT_A2) -#define FPS_SR (PT_SR) -#define FPS_PC (PT_PC) -#define FPS_EA (PT_PC+6) -#define FPS_PC2 (PT_PC+10) - -.macro fp_get_fp_reg - lea (FPD_FPREG,FPDATA,%d0.w*4),%a0 - lea (%a0,%d0.w*8),%a0 -.endm - -/* Macros used to get/put the current program counter. - * 020/030 use a different stack frame then 040/060, for the - * 040/060 the return pc points already to the next location, - * so this only needs to be modified for jump instructions. - */ -.macro fp_get_pc dest - move.l (FPS_PC+4,%sp),\dest -.endm - -.macro fp_put_pc src,jump=0 - move.l \src,(FPS_PC+4,%sp) -.endm - -.macro fp_get_instr_data f,s,dest,label - getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4) - addq.l #\s,%sp@(FPS_PC+4) -.endm - -.macro fp_get_instr_word dest,label,addr - fp_get_instr_data w,2,\dest,\label,\addr -.endm - -.macro fp_get_instr_long dest,label,addr - fp_get_instr_data l,4,\dest,\label,\addr -.endm - -/* These macros are used to read from/write to user space - * on error we jump to the fixup section, load the fault - * address into %a0 and jump to the exit. - * (derived from ) - */ -.macro getuser size,src,dest,label,addr -| printf ,"[\size<%08x]",1,\addr -.Lu1\@: moves\size \src,\dest - - .section .fixup,"ax" - .even -.Lu2\@: move.l \addr,%a0 - jra \label - .previous - - .section __ex_table,"a" - .align 4 - .long .Lu1\@,.Lu2\@ - .previous -.endm - -.macro putuser size,src,dest,label,addr -| printf ,"[\size>%08x]",1,\addr -.Lu1\@: moves\size \src,\dest -.Lu2\@: - - .section .fixup,"ax" - .even -.Lu3\@: move.l \addr,%a0 - jra \label - .previous - - .section __ex_table,"a" - .align 4 - .long .Lu1\@,.Lu3\@ - .long .Lu2\@,.Lu3\@ - .previous -.endm - - -.macro movestack nr,arg1,arg2,arg3,arg4,arg5 - .if \nr - movestack (\nr-1),\arg2,\arg3,\arg4,\arg5 - move.l \arg1,-(%sp) - .endif -.endm - -.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5 -#ifdef FPU_EMU_DEBUG - .data -.Lpdata\@: - .string "\string" - .previous - - movem.l %d0/%d1/%a0/%a1,-(%sp) - .if \bit+1 -#if 0 - moveq #\bit,%d0 - andw #7,%d0 - btst %d0,fp_debugprint+((31-\bit)/8) -#else - btst #\bit,fp_debugprint+((31-\bit)/8) -#endif - jeq .Lpskip\@ - .endif - movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5 - pea .Lpdata\@ - jsr printk - lea ((\nr+1)*4,%sp),%sp -.Lpskip\@: - movem.l (%sp)+,%d0/%d1/%a0/%a1 -#endif -.endm - -.macro printx bit,fp -#ifdef FPU_EMU_DEBUG - movem.l %d0/%a0,-(%sp) - lea \fp,%a0 -#if 0 - moveq #'+',%d0 - tst.w (%a0) - jeq .Lx1\@ - moveq #'-',%d0 -.Lx1\@: printf \bit," %c",1,%d0 - move.l (4,%a0),%d0 - bclr #31,%d0 - jne .Lx2\@ - printf \bit,"0." - jra .Lx3\@ -.Lx2\@: printf \bit,"1." -.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8) - move.w (2,%a0),%d0 - ext.l %d0 - printf \bit,"E%04x",1,%d0 -#else - printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8) -#endif - movem.l (%sp)+,%d0/%a0 -#endif -.endm - -.macro debug instr,args -#ifdef FPU_EMU_DEBUG - \instr \args -#endif -.endm - - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_FRV_MATH_EMU_H */ - diff --git a/include/asm-frv/mb-regs.h b/include/asm-frv/mb-regs.h deleted file mode 100644 index 219e5f9..0000000 --- a/include/asm-frv/mb-regs.h +++ /dev/null @@ -1,200 +0,0 @@ -/* mb-regs.h: motherboard registers - * - * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB_REGS_H -#define _ASM_MB_REGS_H - -#include -#include -#include - -#ifndef __ASSEMBLY__ -/* gcc builtins, annotated */ - -unsigned long __builtin_read8(volatile void __iomem *); -unsigned long __builtin_read16(volatile void __iomem *); -unsigned long __builtin_read32(volatile void __iomem *); -void __builtin_write8(volatile void __iomem *, unsigned char); -void __builtin_write16(volatile void __iomem *, unsigned short); -void __builtin_write32(volatile void __iomem *, unsigned long); -#endif - -#define __region_IO KERNEL_IO_START /* the region from 0xe0000000 to 0xffffffff has suitable - * protection laid over the top for use in memory-mapped - * I/O - */ - -#define __region_CS0 0xff000000 /* Boot ROMs area */ - -#ifdef CONFIG_MB93091_VDK -/* - * VDK motherboard and CPU card specific stuff - */ - -#include - -#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0 -#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1 - -#define __region_CS2 0xe0000000 /* SLBUS/PCI I/O space */ -#define __region_CS2_M 0x0fffffff /* mask */ -#define __region_CS2_C 0x00000000 /* control */ -#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */ -#define __region_CS5_M 0x00ffffff -#define __region_CS5_C 0x00010000 -#define __region_CS7 0xf1000000 /* CB70 CPU-card PCMCIA port I/O space */ -#define __region_CS7_M 0x00ffffff -#define __region_CS7_C 0x00410701 -#define __region_CS1 0xfc000000 /* SLBUS/PCI bridge control registers */ -#define __region_CS1_M 0x000fffff -#define __region_CS1_C 0x00000000 -#define __region_CS6 0xfc100000 /* CB70 CPU-card DM9000 LAN I/O space */ -#define __region_CS6_M 0x000fffff -#define __region_CS6_C 0x00400707 -#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */ -#define __region_CS3_M 0x000fffff -#define __region_CS3_C 0xc8100000 -#define __region_CS4 0xfd000000 /* CB70 CPU-card extra flash space */ -#define __region_CS4_M 0x00ffffff -#define __region_CS4_C 0x00000f07 - -#define __region_PCI_IO (__region_CS2 + 0x04000000UL) -#define __region_PCI_MEM (__region_CS2 + 0x08000000UL) -#define __flush_PCI_writes() \ -do { \ - __builtin_write8((volatile void __iomem *) __region_PCI_MEM, 0); \ -} while(0) - -#define __is_PCI_IO(addr) \ - (((unsigned long)(addr) >> 24) - (__region_PCI_IO >> 24) < (0x04000000UL >> 24)) - -#define __is_PCI_MEM(addr) \ - ((unsigned long)(addr) - __region_PCI_MEM < 0x08000000UL) - -#define __is_PCI_addr(addr) \ - ((unsigned long)(addr) - __region_PCI_IO < 0x0c000000UL) - -#define __get_CLKSW() ({ *(volatile unsigned long *)(__region_CS2 + 0x0130000cUL) & 0xffUL; }) -#define __get_CLKIN() (__get_CLKSW() * 125U * 100000U / 24U) - -#ifndef __ASSEMBLY__ -extern int __nongprelbss mb93090_mb00_detected; -#endif - -#define __addr_LEDS() (__region_CS2 + 0x01200004UL) -#ifdef CONFIG_MB93090_MB00 -#define __set_LEDS(X) \ -do { \ - if (mb93090_mb00_detected) \ - __builtin_write32((void __iomem *) __addr_LEDS(), ~(X)); \ -} while (0) -#else -#define __set_LEDS(X) -#endif - -#define __addr_LCD() (__region_CS2 + 0x01200008UL) -#define __get_LCD(B) __builtin_read32((volatile void __iomem *) (B)) -#define __set_LCD(B,X) __builtin_write32((volatile void __iomem *) (B), (X)) - -#define LCD_D 0x000000ff /* LCD data bus */ -#define LCD_RW 0x00000100 /* LCD R/W signal */ -#define LCD_RS 0x00000200 /* LCD Register Select */ -#define LCD_E 0x00000400 /* LCD Start Enable Signal */ - -#define LCD_CMD_CLEAR (LCD_E|0x001) -#define LCD_CMD_HOME (LCD_E|0x002) -#define LCD_CMD_CURSOR_INC (LCD_E|0x004) -#define LCD_CMD_SCROLL_INC (LCD_E|0x005) -#define LCD_CMD_CURSOR_DEC (LCD_E|0x006) -#define LCD_CMD_SCROLL_DEC (LCD_E|0x007) -#define LCD_CMD_OFF (LCD_E|0x008) -#define LCD_CMD_ON(CRSR,BLINK) (LCD_E|0x00c|(CRSR<<1)|BLINK) -#define LCD_CMD_CURSOR_MOVE_L (LCD_E|0x010) -#define LCD_CMD_CURSOR_MOVE_R (LCD_E|0x014) -#define LCD_CMD_DISPLAY_SHIFT_L (LCD_E|0x018) -#define LCD_CMD_DISPLAY_SHIFT_R (LCD_E|0x01c) -#define LCD_CMD_FUNCSET(DL,N,F) (LCD_E|0x020|(DL<<4)|(N<<3)|(F<<2)) -#define LCD_CMD_SET_CG_ADDR(X) (LCD_E|0x040|X) -#define LCD_CMD_SET_DD_ADDR(X) (LCD_E|0x080|X) -#define LCD_CMD_READ_BUSY (LCD_E|LCD_RW) -#define LCD_DATA_WRITE(X) (LCD_E|LCD_RS|(X)) -#define LCD_DATA_READ (LCD_E|LCD_RS|LCD_RW) - -#else -/* - * PDK unit specific stuff - */ - -#include - -#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0 -#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1 - -#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */ -#define __region_CS5_M 0x00ffffff /* mask */ -#define __region_CS5_C 0x00010000 /* control */ -#define __region_CS2 0x20000000 /* FPGA registers */ -#define __region_CS2_M 0x000fffff -#define __region_CS2_C 0x00000000 -#define __region_CS1 0xfc100000 /* LAN registers */ -#define __region_CS1_M 0x000fffff -#define __region_CS1_C 0x00010404 -#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */ -#define __region_CS3_M 0x000fffff -#define __region_CS3_C 0xc8000000 -#define __region_CS4 0xfd000000 /* extra ROMs area */ -#define __region_CS4_M 0x00ffffff -#define __region_CS4_C 0x00000f07 - -#define __region_CS6 0xfe000000 /* not used - hide behind CPU resource I/O regs */ -#define __region_CS6_M 0x000fffff -#define __region_CS6_C 0x00000f07 -#define __region_CS7 0xfe000000 /* not used - hide behind CPU resource I/O regs */ -#define __region_CS7_M 0x000fffff -#define __region_CS7_C 0x00000f07 - -#define __is_PCI_IO(addr) 0 /* no PCI */ -#define __is_PCI_MEM(addr) 0 -#define __is_PCI_addr(addr) 0 -#define __region_PCI_IO 0 -#define __region_PCI_MEM 0 -#define __flush_PCI_writes() do { } while(0) - -#define __get_CLKSW() 0UL -#define __get_CLKIN() 66000000UL - -#define __addr_LEDS() (__region_CS2 + 0x00000023UL) -#define __set_LEDS(X) __builtin_write8((volatile void __iomem *) __addr_LEDS(), (X)) - -#define __addr_FPGATR() (__region_CS2 + 0x00000030UL) -#define __set_FPGATR(X) __builtin_write32((volatile void __iomem *) __addr_FPGATR(), (X)) -#define __get_FPGATR() __builtin_read32((volatile void __iomem *) __addr_FPGATR()) - -#define MB93093_FPGA_FPGATR_AUDIO_CLK 0x00000003 - -#define __set_FPGATR_AUDIO_CLK(V) \ - __set_FPGATR((__get_FPGATR() & ~MB93093_FPGA_FPGATR_AUDIO_CLK) | (V)) - -#define MB93093_FPGA_FPGATR_AUDIO_CLK_OFF 0x0 -#define MB93093_FPGA_FPGATR_AUDIO_CLK_11MHz 0x1 -#define MB93093_FPGA_FPGATR_AUDIO_CLK_12MHz 0x2 -#define MB93093_FPGA_FPGATR_AUDIO_CLK_02MHz 0x3 - -#define MB93093_FPGA_SWR_PUSHSWMASK (0x1F<<26) -#define MB93093_FPGA_SWR_PUSHSW4 (1<<29) - -#define __addr_FPGA_SWR ((volatile void __iomem *)(__region_CS2 + 0x28UL)) -#define __get_FPGA_PUSHSW1_5() (__builtin_read32(__addr_FPGA_SWR) & MB93093_FPGA_SWR_PUSHSWMASK) - - -#endif - -#endif /* _ASM_MB_REGS_H */ diff --git a/include/asm-frv/mb86943a.h b/include/asm-frv/mb86943a.h deleted file mode 100644 index e87ef92..0000000 --- a/include/asm-frv/mb86943a.h +++ /dev/null @@ -1,42 +0,0 @@ -/* mb86943a.h: MB86943 SPARClite <-> PCI bridge registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB86943A_H -#define _ASM_MB86943A_H - -#include - -#define __reg_MB86943_sl_ctl *(volatile uint32_t *) (__region_CS1 + 0x00) - -#define MB86943_SL_CTL_BUS_WIDTH_64 0x00000001 -#define MB86943_SL_CTL_AS_HOST 0x00000002 -#define MB86943_SL_CTL_DRCT_MASTER_SWAP 0x00000004 -#define MB86943_SL_CTL_DRCT_SLAVE_SWAP 0x00000008 -#define MB86943_SL_CTL_PCI_CONFIG_SWAP 0x00000010 -#define MB86943_SL_CTL_ECS0_ENABLE 0x00000020 -#define MB86943_SL_CTL_ECS1_ENABLE 0x00000040 -#define MB86943_SL_CTL_ECS2_ENABLE 0x00000080 - -#define __reg_MB86943_ecs_ctl(N) *(volatile uint32_t *) (__region_CS1 + 0x08 + (0x08*(N))) -#define __reg_MB86943_ecs_range(N) *(volatile uint32_t *) (__region_CS1 + 0x20 + (0x10*(N))) -#define __reg_MB86943_ecs_base(N) *(volatile uint32_t *) (__region_CS1 + 0x28 + (0x10*(N))) - -#define __reg_MB86943_sl_pci_io_range *(volatile uint32_t *) (__region_CS1 + 0x50) -#define __reg_MB86943_sl_pci_io_base *(volatile uint32_t *) (__region_CS1 + 0x58) -#define __reg_MB86943_sl_pci_mem_range *(volatile uint32_t *) (__region_CS1 + 0x60) -#define __reg_MB86943_sl_pci_mem_base *(volatile uint32_t *) (__region_CS1 + 0x68) -#define __reg_MB86943_pci_sl_io_base *(volatile uint32_t *) (__region_CS1 + 0x70) -#define __reg_MB86943_pci_sl_mem_base *(volatile uint32_t *) (__region_CS1 + 0x78) - -#define __reg_MB86943_pci_arbiter *(volatile uint32_t *) (__region_CS2 + 0x01300014) -#define MB86943_PCIARB_EN 0x00000001 - -#endif /* _ASM_MB86943A_H */ diff --git a/include/asm-frv/mb93091-fpga-irqs.h b/include/asm-frv/mb93091-fpga-irqs.h deleted file mode 100644 index 19778c5b..0000000 --- a/include/asm-frv/mb93091-fpga-irqs.h +++ /dev/null @@ -1,42 +0,0 @@ -/* mb93091-fpga-irqs.h: MB93091 CPU board FPGA IRQs - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB93091_FPGA_IRQS_H -#define _ASM_MB93091_FPGA_IRQS_H - -#include - -#ifndef __ASSEMBLY__ - -/* IRQ IDs presented to drivers */ -enum { - IRQ_FPGA__UNUSED = IRQ_BASE_FPGA, - IRQ_FPGA_SYSINT_BUS_EXPANSION_1, - IRQ_FPGA_SL_BUS_EXPANSION_2, - IRQ_FPGA_PCI_INTD, - IRQ_FPGA_PCI_INTC, - IRQ_FPGA_PCI_INTB, - IRQ_FPGA_PCI_INTA, - IRQ_FPGA_SL_BUS_EXPANSION_7, - IRQ_FPGA_SYSINT_BUS_EXPANSION_8, - IRQ_FPGA_SL_BUS_EXPANSION_9, - IRQ_FPGA_MB86943_PCI_INTA, - IRQ_FPGA_MB86943_SLBUS_SIDE, - IRQ_FPGA_RTL8029_INTA, - IRQ_FPGA_SYSINT_BUS_EXPANSION_13, - IRQ_FPGA_SL_BUS_EXPANSION_14, - IRQ_FPGA_NMI, -}; - - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_MB93091_FPGA_IRQS_H */ diff --git a/include/asm-frv/mb93093-fpga-irqs.h b/include/asm-frv/mb93093-fpga-irqs.h deleted file mode 100644 index 590266b..0000000 --- a/include/asm-frv/mb93093-fpga-irqs.h +++ /dev/null @@ -1,29 +0,0 @@ -/* mb93093-fpga-irqs.h: MB93093 CPU board FPGA IRQs - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB93093_FPGA_IRQS_H -#define _ASM_MB93093_FPGA_IRQS_H - -#include - -#ifndef __ASSEMBLY__ - -/* IRQ IDs presented to drivers */ -enum { - IRQ_FPGA_PUSH_BUTTON_SW1_5 = IRQ_BASE_FPGA + 8, - IRQ_FPGA_ROCKER_C_SW8 = IRQ_BASE_FPGA + 9, - IRQ_FPGA_ROCKER_C_SW9 = IRQ_BASE_FPGA + 10, -}; - - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_MB93093_FPGA_IRQS_H */ diff --git a/include/asm-frv/mb93493-irqs.h b/include/asm-frv/mb93493-irqs.h deleted file mode 100644 index 82c7aed..0000000 --- a/include/asm-frv/mb93493-irqs.h +++ /dev/null @@ -1,50 +0,0 @@ -/* mb93493-irqs.h: MB93493 companion chip IRQs - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB93493_IRQS_H -#define _ASM_MB93493_IRQS_H - -#include - -#ifndef __ASSEMBLY__ - -/* IRQ IDs presented to drivers */ -enum { - IRQ_MB93493_VDC = IRQ_BASE_MB93493 + 0, - IRQ_MB93493_VCC = IRQ_BASE_MB93493 + 1, - IRQ_MB93493_AUDIO_OUT = IRQ_BASE_MB93493 + 2, - IRQ_MB93493_I2C_0 = IRQ_BASE_MB93493 + 3, - IRQ_MB93493_I2C_1 = IRQ_BASE_MB93493 + 4, - IRQ_MB93493_USB = IRQ_BASE_MB93493 + 5, - IRQ_MB93493_LOCAL_BUS = IRQ_BASE_MB93493 + 7, - IRQ_MB93493_PCMCIA = IRQ_BASE_MB93493 + 8, - IRQ_MB93493_GPIO = IRQ_BASE_MB93493 + 9, - IRQ_MB93493_AUDIO_IN = IRQ_BASE_MB93493 + 10, -}; - -/* IRQ multiplexor mappings */ -#define ROUTE_VIA_IRQ0 0 /* route IRQ by way of CPU external IRQ 0 */ -#define ROUTE_VIA_IRQ1 1 /* route IRQ by way of CPU external IRQ 1 */ - -#define IRQ_MB93493_VDC_ROUTE ROUTE_VIA_IRQ0 -#define IRQ_MB93493_VCC_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_AUDIO_OUT_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_I2C_0_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_I2C_1_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_USB_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_LOCAL_BUS_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_PCMCIA_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_GPIO_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_AUDIO_IN_ROUTE ROUTE_VIA_IRQ1 - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_MB93493_IRQS_H */ diff --git a/include/asm-frv/mb93493-regs.h b/include/asm-frv/mb93493-regs.h deleted file mode 100644 index 8a1f6aa..0000000 --- a/include/asm-frv/mb93493-regs.h +++ /dev/null @@ -1,281 +0,0 @@ -/* mb93493-regs.h: MB93493 companion chip registers - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB93493_REGS_H -#define _ASM_MB93493_REGS_H - -#include -#include - -#define __addr_MB93493(X) ((volatile unsigned long *)(__region_CS3 + (X))) -#define __get_MB93493(X) ({ *(volatile unsigned long *)(__region_CS3 + (X)); }) - -#define __set_MB93493(X,V) \ -do { \ - *(volatile unsigned long *)(__region_CS3 + (X)) = (V); mb(); \ -} while(0) - -#define __get_MB93493_STSR(X) __get_MB93493(0x3c0 + (X) * 4) -#define __set_MB93493_STSR(X,V) __set_MB93493(0x3c0 + (X) * 4, (V)) -#define MB93493_STSR_EN - -#define __addr_MB93493_IQSR(X) __addr_MB93493(0x3d0 + (X) * 4) -#define __get_MB93493_IQSR(X) __get_MB93493(0x3d0 + (X) * 4) -#define __set_MB93493_IQSR(X,V) __set_MB93493(0x3d0 + (X) * 4, (V)) - -#define __get_MB93493_DQSR(X) __get_MB93493(0x3e0 + (X) * 4) -#define __set_MB93493_DQSR(X,V) __set_MB93493(0x3e0 + (X) * 4, (V)) - -#define __get_MB93493_LBSER() __get_MB93493(0x3f0) -#define __set_MB93493_LBSER(V) __set_MB93493(0x3f0, (V)) - -#define MB93493_LBSER_VDC 0x00010000 -#define MB93493_LBSER_VCC 0x00020000 -#define MB93493_LBSER_AUDIO 0x00040000 -#define MB93493_LBSER_I2C_0 0x00080000 -#define MB93493_LBSER_I2C_1 0x00100000 -#define MB93493_LBSER_USB 0x00200000 -#define MB93493_LBSER_GPIO 0x00800000 -#define MB93493_LBSER_PCMCIA 0x01000000 - -#define __get_MB93493_LBSR() __get_MB93493(0x3fc) -#define __set_MB93493_LBSR(V) __set_MB93493(0x3fc, (V)) - -/* - * video display controller - */ -#define __get_MB93493_VDC(X) __get_MB93493(MB93493_VDC_##X) -#define __set_MB93493_VDC(X,V) __set_MB93493(MB93493_VDC_##X, (V)) - -#define MB93493_VDC_RCURSOR 0x140 /* cursor position */ -#define MB93493_VDC_RCT1 0x144 /* cursor colour 1 */ -#define MB93493_VDC_RCT2 0x148 /* cursor colour 2 */ -#define MB93493_VDC_RHDC 0x150 /* horizontal display period */ -#define MB93493_VDC_RH_MARGINS 0x154 /* horizontal margin sizes */ -#define MB93493_VDC_RVDC 0x158 /* vertical display period */ -#define MB93493_VDC_RV_MARGINS 0x15c /* vertical margin sizes */ -#define MB93493_VDC_RC 0x170 /* VDC control */ -#define MB93493_VDC_RCLOCK 0x174 /* clock divider, DMA req delay */ -#define MB93493_VDC_RBLACK 0x178 /* black insert sizes */ -#define MB93493_VDC_RS 0x17c /* VDC status */ - -#define __addr_MB93493_VDC_BCI(X) ({ (volatile unsigned long *)(__region_CS3 + 0x000 + (X)); }) -#define __addr_MB93493_VDC_TPO(X) (__region_CS3 + 0x1c0 + (X)) - -#define VDC_TPO_WIDTH 32 - -#define VDC_RC_DSR 0x00000080 /* VDC master reset */ - -#define VDC_RS_IT 0x00060000 /* interrupt indicators */ -#define VDC_RS_IT_UNDERFLOW 0x00040000 /* - underflow event */ -#define VDC_RS_IT_VSYNC 0x00020000 /* - VSYNC event */ -#define VDC_RS_DFI 0x00010000 /* current interlace field number */ -#define VDC_RS_DFI_TOP 0x00000000 /* - top field */ -#define VDC_RS_DFI_BOTTOM 0x00010000 /* - bottom field */ -#define VDC_RS_DCSR 0x00000010 /* cursor state */ -#define VDC_RS_DCM 0x00000003 /* display mode */ -#define VDC_RS_DCM_DISABLED 0x00000000 /* - display disabled */ -#define VDC_RS_DCM_STOPPED 0x00000001 /* - VDC stopped */ -#define VDC_RS_DCM_FREERUNNING 0x00000002 /* - VDC free-running */ -#define VDC_RS_DCM_TRANSFERRING 0x00000003 /* - data being transferred to VDC */ - -/* - * video capture controller - */ -#define __get_MB93493_VCC(X) __get_MB93493(MB93493_VCC_##X) -#define __set_MB93493_VCC(X,V) __set_MB93493(MB93493_VCC_##X, (V)) - -#define MB93493_VCC_RREDUCT 0x104 /* reduction rate */ -#define MB93493_VCC_RHY 0x108 /* horizontal brightness filter coefficients */ -#define MB93493_VCC_RHC 0x10c /* horizontal colour-difference filter coefficients */ -#define MB93493_VCC_RHSIZE 0x110 /* horizontal cycle sizes */ -#define MB93493_VCC_RHBC 0x114 /* horizontal back porch size */ -#define MB93493_VCC_RVCC 0x118 /* vertical capture period */ -#define MB93493_VCC_RVBC 0x11c /* vertical back porch period */ -#define MB93493_VCC_RV 0x120 /* vertical filter coefficients */ -#define MB93493_VCC_RDTS 0x128 /* DMA transfer size */ -#define MB93493_VCC_RDTS_4B 0x01000000 /* 4-byte transfer */ -#define MB93493_VCC_RDTS_32B 0x03000000 /* 32-byte transfer */ -#define MB93493_VCC_RDTS_SHIFT 24 -#define MB93493_VCC_RCC 0x130 /* VCC control */ -#define MB93493_VCC_RIS 0x134 /* VCC interrupt status */ - -#define __addr_MB93493_VCC_TPI(X) (__region_CS3 + 0x180 + (X)) - -#define VCC_RHSIZE_RHCC 0x000007ff -#define VCC_RHSIZE_RHCC_SHIFT 0 -#define VCC_RHSIZE_RHTCC 0x0fff0000 -#define VCC_RHSIZE_RHTCC_SHIFT 16 - -#define VCC_RVBC_RVBC 0x00003f00 -#define VCC_RVBC_RVBC_SHIFT 8 - -#define VCC_RREDUCT_RHR 0x07ff0000 -#define VCC_RREDUCT_RHR_SHIFT 16 -#define VCC_RREDUCT_RVR 0x000007ff -#define VCC_RREDUCT_RVR_SHIFT 0 - -#define VCC_RCC_CE 0x00000001 /* VCC enable */ -#define VCC_RCC_CS 0x00000002 /* request video capture start */ -#define VCC_RCC_CPF 0x0000000c /* pixel format */ -#define VCC_RCC_CPF_YCBCR_16 0x00000000 /* - YCbCr 4:2:2 16-bit format */ -#define VCC_RCC_CPF_RGB 0x00000004 /* - RGB 4:4:4 format */ -#define VCC_RCC_CPF_YCBCR_24 0x00000008 /* - YCbCr 4:2:2 24-bit format */ -#define VCC_RCC_CPF_BT656 0x0000000c /* - ITU R-BT.656 format */ -#define VCC_RCC_CPF_SHIFT 2 -#define VCC_RCC_CSR 0x00000080 /* request reset */ -#define VCC_RCC_HSIP 0x00000100 /* HSYNC polarity */ -#define VCC_RCC_HSIP_LOACT 0x00000000 /* - low active */ -#define VCC_RCC_HSIP_HIACT 0x00000100 /* - high active */ -#define VCC_RCC_VSIP 0x00000200 /* VSYNC polarity */ -#define VCC_RCC_VSIP_LOACT 0x00000000 /* - low active */ -#define VCC_RCC_VSIP_HIACT 0x00000200 /* - high active */ -#define VCC_RCC_CIE 0x00000800 /* interrupt enable */ -#define VCC_RCC_CFP 0x00001000 /* RGB pixel packing */ -#define VCC_RCC_CFP_4TO3 0x00000000 /* - pack 4 pixels into 3 words */ -#define VCC_RCC_CFP_1TO1 0x00001000 /* - pack 1 pixel into 1 words */ -#define VCC_RCC_CSM 0x00006000 /* interlace specification */ -#define VCC_RCC_CSM_ONEPASS 0x00002000 /* - non-interlaced */ -#define VCC_RCC_CSM_INTERLACE 0x00004000 /* - interlaced */ -#define VCC_RCC_CSM_SHIFT 13 -#define VCC_RCC_ES 0x00008000 /* capture start polarity */ -#define VCC_RCC_ES_NEG 0x00000000 /* - negative edge */ -#define VCC_RCC_ES_POS 0x00008000 /* - positive edge */ -#define VCC_RCC_IFI 0x00080000 /* inferlace field evaluation reverse */ -#define VCC_RCC_FDTS 0x00300000 /* interlace field start */ -#define VCC_RCC_FDTS_3_8 0x00000000 /* - 3/8 of horizontal entire cycle */ -#define VCC_RCC_FDTS_1_4 0x00100000 /* - 1/4 of horizontal entire cycle */ -#define VCC_RCC_FDTS_7_16 0x00200000 /* - 7/16 of horizontal entire cycle */ -#define VCC_RCC_FDTS_SHIFT 20 -#define VCC_RCC_MOV 0x00400000 /* test bit - always set to 1 */ -#define VCC_RCC_STP 0x00800000 /* request video capture stop */ -#define VCC_RCC_TO 0x01000000 /* input during top-field only */ - -#define VCC_RIS_VSYNC 0x01000000 /* VSYNC interrupt */ -#define VCC_RIS_OV 0x02000000 /* overflow interrupt */ -#define VCC_RIS_BOTTOM 0x08000000 /* interlace bottom field */ -#define VCC_RIS_STARTED 0x10000000 /* capture started */ - -/* - * I2C - */ -#define MB93493_I2C_BSR 0x340 /* bus status */ -#define MB93493_I2C_BCR 0x344 /* bus control */ -#define MB93493_I2C_CCR 0x348 /* clock control */ -#define MB93493_I2C_ADR 0x34c /* address */ -#define MB93493_I2C_DTR 0x350 /* data */ -#define MB93493_I2C_BC2R 0x35c /* bus control 2 */ - -#define __addr_MB93493_I2C(port,X) (__region_CS3 + MB93493_I2C_##X + ((port)*0x20)) -#define __get_MB93493_I2C(port,X) __get_MB93493(MB93493_I2C_##X + ((port)*0x20)) -#define __set_MB93493_I2C(port,X,V) __set_MB93493(MB93493_I2C_##X + ((port)*0x20), (V)) - -#define I2C_BSR_BB (1 << 7) - -/* - * audio controller (I2S) registers - */ -#define __get_MB93493_I2S(X) __get_MB93493(MB93493_I2S_##X) -#define __set_MB93493_I2S(X,V) __set_MB93493(MB93493_I2S_##X, (V)) - -#define MB93493_I2S_ALDR 0x300 /* L-channel data */ -#define MB93493_I2S_ARDR 0x304 /* R-channel data */ -#define MB93493_I2S_APDR 0x308 /* 16-bit packed data */ -#define MB93493_I2S_AISTR 0x310 /* status */ -#define MB93493_I2S_AICR 0x314 /* control */ - -#define __addr_MB93493_I2S_ALDR(X) (__region_CS3 + MB93493_I2S_ALDR + (X)) -#define __addr_MB93493_I2S_ARDR(X) (__region_CS3 + MB93493_I2S_ARDR + (X)) -#define __addr_MB93493_I2S_APDR(X) (__region_CS3 + MB93493_I2S_APDR + (X)) -#define __addr_MB93493_I2S_ADR(X) (__region_CS3 + 0x320 + (X)) - -#define I2S_AISTR_OTST 0x00000003 /* status of output data transfer */ -#define I2S_AISTR_OTR 0x00000010 /* output transfer request pending */ -#define I2S_AISTR_OUR 0x00000020 /* output FIFO underrun detected */ -#define I2S_AISTR_OOR 0x00000040 /* output FIFO overrun detected */ -#define I2S_AISTR_ODS 0x00000100 /* output DMA transfer size */ -#define I2S_AISTR_ODE 0x00000400 /* output DMA transfer request enable */ -#define I2S_AISTR_OTRIE 0x00001000 /* output transfer request interrupt enable */ -#define I2S_AISTR_OURIE 0x00002000 /* output FIFO underrun interrupt enable */ -#define I2S_AISTR_OORIE 0x00004000 /* output FIFO overrun interrupt enable */ -#define I2S_AISTR__OUT_MASK 0x00007570 -#define I2S_AISTR_ITST 0x00030000 /* status of input data transfer */ -#define I2S_AISTR_ITST_SHIFT 16 -#define I2S_AISTR_ITR 0x00100000 /* input transfer request pending */ -#define I2S_AISTR_IUR 0x00200000 /* input FIFO underrun detected */ -#define I2S_AISTR_IOR 0x00400000 /* input FIFO overrun detected */ -#define I2S_AISTR_IDS 0x01000000 /* input DMA transfer size */ -#define I2S_AISTR_IDE 0x04000000 /* input DMA transfer request enable */ -#define I2S_AISTR_ITRIE 0x10000000 /* input transfer request interrupt enable */ -#define I2S_AISTR_IURIE 0x20000000 /* input FIFO underrun interrupt enable */ -#define I2S_AISTR_IORIE 0x40000000 /* input FIFO overrun interrupt enable */ -#define I2S_AISTR__IN_MASK 0x75700000 - -#define I2S_AICR_MI 0x00000001 /* mono input requested */ -#define I2S_AICR_AMI 0x00000002 /* relation between LRCKI/FS1 and SDI */ -#define I2S_AICR_LRI 0x00000004 /* function of LRCKI pin */ -#define I2S_AICR_SDMI 0x00000070 /* format of input audio data */ -#define I2S_AICR_SDMI_SHIFT 4 -#define I2S_AICR_CLI 0x00000080 /* input FIFO clearing control */ -#define I2S_AICR_IM 0x00000300 /* input state control */ -#define I2S_AICR_IM_SHIFT 8 -#define I2S_AICR__IN_MASK 0x000003f7 -#define I2S_AICR_MO 0x00001000 /* mono output requested */ -#define I2S_AICR_AMO 0x00002000 /* relation between LRCKO/FS0 and SDO */ -#define I2S_AICR_AMO_SHIFT 13 -#define I2S_AICR_LRO 0x00004000 /* function of LRCKO pin */ -#define I2S_AICR_SDMO 0x00070000 /* format of output audio data */ -#define I2S_AICR_SDMO_SHIFT 16 -#define I2S_AICR_CLO 0x00080000 /* output FIFO clearing control */ -#define I2S_AICR_OM 0x00100000 /* output state control */ -#define I2S_AICR__OUT_MASK 0x001f7000 -#define I2S_AICR_DIV 0x03000000 /* frequency division rate */ -#define I2S_AICR_DIV_SHIFT 24 -#define I2S_AICR_FL 0x20000000 /* frame length */ -#define I2S_AICR_FS 0x40000000 /* frame sync method */ -#define I2S_AICR_ME 0x80000000 /* master enable */ - -/* - * PCMCIA - */ -#define __addr_MB93493_PCMCIA(X) ((volatile unsigned long *)(__region_CS5 + (X))) - -/* - * GPIO - */ -#define __get_MB93493_GPIO_PDR(X) __get_MB93493(0x380 + (X) * 0xc0) -#define __set_MB93493_GPIO_PDR(X,V) __set_MB93493(0x380 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_GPDR(X) __get_MB93493(0x384 + (X) * 0xc0) -#define __set_MB93493_GPIO_GPDR(X,V) __set_MB93493(0x384 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_SIR(X) __get_MB93493(0x388 + (X) * 0xc0) -#define __set_MB93493_GPIO_SIR(X,V) __set_MB93493(0x388 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_SOR(X) __get_MB93493(0x38c + (X) * 0xc0) -#define __set_MB93493_GPIO_SOR(X,V) __set_MB93493(0x38c + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_PDSR(X) __get_MB93493(0x390 + (X) * 0xc0) -#define __set_MB93493_GPIO_PDSR(X,V) __set_MB93493(0x390 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_PDCR(X) __get_MB93493(0x394 + (X) * 0xc0) -#define __set_MB93493_GPIO_PDCR(X,V) __set_MB93493(0x394 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_INTST(X) __get_MB93493(0x398 + (X) * 0xc0) -#define __set_MB93493_GPIO_INTST(X,V) __set_MB93493(0x398 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_IEHL(X) __get_MB93493(0x39c + (X) * 0xc0) -#define __set_MB93493_GPIO_IEHL(X,V) __set_MB93493(0x39c + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_IELH(X) __get_MB93493(0x3a0 + (X) * 0xc0) -#define __set_MB93493_GPIO_IELH(X,V) __set_MB93493(0x3a0 + (X) * 0xc0, (V)) - -#endif /* _ASM_MB93493_REGS_H */ diff --git a/include/asm-frv/mc146818rtc.h b/include/asm-frv/mc146818rtc.h deleted file mode 100644 index 90dfb7a..0000000 --- a/include/asm-frv/mc146818rtc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* mc146818rtc.h: RTC defs - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MC146818RTC_H -#define _ASM_MC146818RTC_H - - -#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h deleted file mode 100644 index 2947764..0000000 --- a/include/asm-frv/mem-layout.h +++ /dev/null @@ -1,86 +0,0 @@ -/* mem-layout.h: memory layout - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MEM_LAYOUT_H -#define _ASM_MEM_LAYOUT_H - -#ifndef __ASSEMBLY__ -#define __UL(X) ((unsigned long) (X)) -#else -#define __UL(X) (X) -#endif - -/* - * PAGE_SHIFT determines the page size - */ -#define PAGE_SHIFT 14 - -#ifndef __ASSEMBLY__ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#else -#define PAGE_SIZE (1 << PAGE_SHIFT) -#endif - -#define PAGE_MASK (~(PAGE_SIZE-1)) - -/* - * the slab must be aligned such that load- and store-double instructions don't - * fault if used - */ -#define ARCH_KMALLOC_MINALIGN 8 -#define ARCH_SLAB_MINALIGN 8 - -/*****************************************************************************/ -/* - * virtual memory layout from kernel's point of view - */ -#define PAGE_OFFSET ((unsigned long) &__page_offset) - -#ifdef CONFIG_MMU - -/* see Documentation/frv/mmu-layout.txt */ -#define KERNEL_LOWMEM_START __UL(0xc0000000) -#define KERNEL_LOWMEM_END __UL(0xd0000000) -#define VMALLOC_START __UL(0xd0000000) -#define VMALLOC_END __UL(0xd8000000) -#define PKMAP_BASE __UL(0xd8000000) -#define PKMAP_END __UL(0xdc000000) -#define KMAP_ATOMIC_SECONDARY_FRAME __UL(0xdc000000) -#define KMAP_ATOMIC_PRIMARY_FRAME __UL(0xdd000000) - -#endif - -#define KERNEL_IO_START __UL(0xe0000000) - - -/*****************************************************************************/ -/* - * memory layout from userspace's point of view - */ -#define BRK_BASE __UL(2 * 1024 * 1024 + PAGE_SIZE) -#define STACK_TOP __UL(2 * 1024 * 1024) -#define STACK_TOP_MAX __UL(0xc0000000) - -/* userspace process size */ -#ifdef CONFIG_MMU -#define TASK_SIZE (PAGE_OFFSET) -#else -#define TASK_SIZE __UL(0xFFFFFFFFUL) -#endif - -/* base of area at which unspecified mmaps will start */ -#ifdef CONFIG_BINFMT_ELF_FDPIC -#define TASK_UNMAPPED_BASE __UL(16 * 1024 * 1024) -#else -#define TASK_UNMAPPED_BASE __UL(TASK_SIZE / 3) -#endif - -#endif /* _ASM_MEM_LAYOUT_H */ diff --git a/include/asm-frv/mman.h b/include/asm-frv/mman.h deleted file mode 100644 index b4371e9..0000000 --- a/include/asm-frv/mman.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __ASM_MMAN_H__ -#define __ASM_MMAN_H__ - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __ASM_MMAN_H__ */ - diff --git a/include/asm-frv/mmu.h b/include/asm-frv/mmu.h deleted file mode 100644 index 86ca0e8..0000000 --- a/include/asm-frv/mmu.h +++ /dev/null @@ -1,41 +0,0 @@ -/* mmu.h: memory management context for FR-V with or without MMU support - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_MMU_H -#define _ASM_MMU_H - -typedef struct { -#ifdef CONFIG_MMU - struct list_head id_link; /* link in list of context ID owners */ - unsigned short id; /* MMU context ID */ - unsigned short id_busy; /* true if ID is in CXNR */ - unsigned long itlb_cached_pge; /* [SCR0] PGE cached for insn TLB handler */ - unsigned long itlb_ptd_mapping; /* [DAMR4] PTD mapping for itlb cached PGE */ - unsigned long dtlb_cached_pge; /* [SCR1] PGE cached for data TLB handler */ - unsigned long dtlb_ptd_mapping; /* [DAMR5] PTD mapping for dtlb cached PGE */ - -#else - unsigned long end_brk; - -#endif - -#ifdef CONFIG_BINFMT_ELF_FDPIC - unsigned long exec_fdpic_loadmap; - unsigned long interp_fdpic_loadmap; -#endif - -} mm_context_t; - -#ifdef CONFIG_MMU -extern int __nongpreldata cxn_pinned; -extern int cxn_pin_by_pid(pid_t pid); -#endif - -#endif /* _ASM_MMU_H */ diff --git a/include/asm-frv/mmu_context.h b/include/asm-frv/mmu_context.h deleted file mode 100644 index c7daa39..0000000 --- a/include/asm-frv/mmu_context.h +++ /dev/null @@ -1,50 +0,0 @@ -/* mmu_context.h: MMU context management routines - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MMU_CONTEXT_H -#define _ASM_MMU_CONTEXT_H - -#include -#include -#include -#include - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -#ifdef CONFIG_MMU -extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); -extern void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *_pgd); -extern void destroy_context(struct mm_struct *mm); - -#else -#define init_new_context(tsk, mm) ({ 0; }) -#define change_mm_context(old, ctx, _pml4) do {} while(0) -#define destroy_context(mm) do {} while(0) -#endif - -#define switch_mm(prev, next, tsk) \ -do { \ - if (prev != next) \ - change_mm_context(&prev->context, &next->context, next->pgd); \ -} while(0) - -#define activate_mm(prev, next) \ -do { \ - change_mm_context(&prev->context, &next->context, next->pgd); \ -} while(0) - -#define deactivate_mm(tsk, mm) \ -do { \ -} while(0) - -#endif diff --git a/include/asm-frv/module.h b/include/asm-frv/module.h deleted file mode 100644 index 3d5c636..0000000 --- a/include/asm-frv/module.h +++ /dev/null @@ -1,28 +0,0 @@ -/* module.h: FRV module stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_MODULE_H -#define _ASM_MODULE_H - -struct mod_arch_specific -{ -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -/* - * Include the architecture version. - */ -#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " " - -#endif /* _ASM_MODULE_H */ - diff --git a/include/asm-frv/msgbuf.h b/include/asm-frv/msgbuf.h deleted file mode 100644 index 97ceb55..0000000 --- a/include/asm-frv/msgbuf.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _ASM_MSGBUF_H -#define _ASM_MSGBUF_H - -/* - * The msqid64_ds structure for FR-V architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_MSGBUF_H */ - diff --git a/include/asm-frv/mutex.h b/include/asm-frv/mutex.h deleted file mode 100644 index 458c1f7..0000000 --- a/include/asm-frv/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-frv/page.h b/include/asm-frv/page.h deleted file mode 100644 index bd9c220..0000000 --- a/include/asm-frv/page.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef _ASM_PAGE_H -#define _ASM_PAGE_H - -#include -#include -#include -#include - -#ifndef __ASSEMBLY__ - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE) -#define copy_user_page(vto, vfrom, vaddr, topg) memcpy((vto), (vfrom), PAGE_SIZE) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long ste[64];} pmd_t; -typedef struct { pmd_t pue[1]; } pud_t; -typedef struct { pud_t pge[1]; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).ste[0]) -#define pud_val(x) ((x).pue[0]) -#define pgd_val(x) ((x).pge[0]) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pud(x) ((pud_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) -#define PTE_MASK PAGE_MASK - -#define devmem_is_allowed(pfn) 1 - -#define __pa(vaddr) virt_to_phys((void *) (unsigned long) (vaddr)) -#define __va(paddr) phys_to_virt((unsigned long) (paddr)) - -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) - -extern unsigned long max_low_pfn; -extern unsigned long min_low_pfn; -extern unsigned long max_pfn; - -#ifdef CONFIG_MMU -#define pfn_valid(pfn) ((pfn) < max_mapnr) -#else -#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) -#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) - -#endif - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - - -#ifdef CONFIG_MMU -#define VM_DATA_DEFAULT_FLAGS \ - (VM_READ | VM_WRITE | \ - ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) -#endif - -#endif /* __ASSEMBLY__ */ - -#include -#include - -#endif /* _ASM_PAGE_H */ diff --git a/include/asm-frv/param.h b/include/asm-frv/param.h deleted file mode 100644 index 6859dd5..0000000 --- a/include/asm-frv/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_PARAM_H -#define _ASM_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ /* Internal kernel timer frequency */ -#define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -#define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 16384 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _ASM_PARAM_H */ diff --git a/include/asm-frv/pci.h b/include/asm-frv/pci.h deleted file mode 100644 index 585d9b4..0000000 --- a/include/asm-frv/pci.h +++ /dev/null @@ -1,118 +0,0 @@ -/* pci.h: FR-V specific PCI declarations - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-m68k/pci.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef ASM_PCI_H -#define ASM_PCI_H - -#include -#include -#include -#include - -struct pci_dev; - -#define pcibios_assign_all_busses() 0 - -extern void pcibios_set_master(struct pci_dev *dev); - -extern void pcibios_penalize_isa_irq(int irq); - -#ifdef CONFIG_MMU -extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle); -extern void consistent_free(void *vaddr); -extern void consistent_sync(void *vaddr, size_t size, int direction); -extern void consistent_sync_page(struct page *page, unsigned long offset, - size_t size, int direction); -#endif - -extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, - dma_addr_t *dma_handle); - -extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -/* Return the index of the PCI controller for device PDEV. */ -#define pci_controller_num(PDEV) (0) - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -/* - * These are pretty much arbitary with the CoMEM implementation. - * We have the whole address space to ourselves. - */ -#define PCIBIOS_MIN_IO 0x100 -#define PCIBIOS_MIN_MEM 0x00010000 - -/* Make physical memory consistent for a single - * streaming mode DMA translation after a transfer. - * - * If you perform a pci_map_single() but wish to interrogate the - * buffer using the cpu, yet do not wish to teardown the PCI dma - * mapping, you must call this function before doing so. At the - * next point you give the PCI dma address back to the card, the - * device again owns the buffer. - */ -static inline void pci_dma_sync_single(struct pci_dev *hwdev, - dma_addr_t dma_handle, - size_t size, int direction) -{ - if (direction == PCI_DMA_NONE) - BUG(); - - frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle), - (unsigned long)bus_to_virt(dma_handle) + size); -} - -/* Make physical memory consistent for a set of streaming - * mode DMA translations after a transfer. - * - * The same as pci_dma_sync_single but for a scatter-gather list, - * same rules and usage. - */ -static inline void pci_dma_sync_sg(struct pci_dev *hwdev, - struct scatterlist *sg, - int nelems, int direction) -{ - int i; - - if (direction == PCI_DMA_NONE) - BUG(); - - for (i = 0; i < nelems; i++) - frv_cache_wback_inv(sg_dma_address(&sg[i]), - sg_dma_address(&sg[i])+sg_dma_len(&sg[i])); -} - - -#endif diff --git a/include/asm-frv/percpu.h b/include/asm-frv/percpu.h deleted file mode 100644 index 2cad3f8..0000000 --- a/include/asm-frv/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_PERCPU_H -#define __ASM_PERCPU_H - -#include - -#endif /* __ASM_PERCPU_H */ diff --git a/include/asm-frv/pgalloc.h b/include/asm-frv/pgalloc.h deleted file mode 100644 index 971e6ad..0000000 --- a/include/asm-frv/pgalloc.h +++ /dev/null @@ -1,69 +0,0 @@ -/* pgalloc.h: Page allocation routines for FRV - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Derived from: - * include/asm-m68knommu/pgalloc.h - * include/asm-i386/pgalloc.h - */ -#ifndef _ASM_PGALLOC_H -#define _ASM_PGALLOC_H - -#include -#include - -#ifdef CONFIG_MMU - -#define pmd_populate_kernel(mm, pmd, pte) __set_pmd(pmd, __pa(pte) | _PAGE_TABLE) -#define pmd_populate(MM, PMD, PAGE) \ -do { \ - __set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE); \ -} while(0) -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * Allocate and free page tables. - */ - -extern pgd_t *pgd_alloc(struct mm_struct *); -extern void pgd_free(struct mm_struct *mm, pgd_t *); - -extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); - -extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long); - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long)pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - __free_page(pte); -} - -#define __pte_free_tlb(tlb,pte) \ -do { \ - pgtable_page_dtor(pte); \ - tlb_remove_page((tlb),(pte)); \ -} while (0) - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - * (In the PAE case we free the pmds as part of the pgd.) - */ -#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); }) -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) - -#endif /* CONFIG_MMU */ - -#endif /* _ASM_PGALLOC_H */ diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h deleted file mode 100644 index 3323301..0000000 --- a/include/asm-frv/pgtable.h +++ /dev/null @@ -1,549 +0,0 @@ -/* pgtable.h: FR-V page table mangling - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Derived from: - * include/asm-m68knommu/pgtable.h - * include/asm-i386/pgtable.h - */ - -#ifndef _ASM_PGTABLE_H -#define _ASM_PGTABLE_H - -#include -#include -#include - -#ifndef __ASSEMBLY__ -#include -#include -#include -#include -#include -struct vm_area_struct; -#endif - -#ifndef __ASSEMBLY__ -#if defined(CONFIG_HIGHPTE) -typedef unsigned long pte_addr_t; -#else -typedef pte_t *pte_addr_t; -#endif -#endif - -/*****************************************************************************/ -/* - * MMU-less operation case first - */ -#ifndef CONFIG_MMU - -#define pgd_present(pgd) (1) /* pages are always present on NO_MM */ -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_clear(pgdp) -#define kern_addr_valid(addr) (1) -#define pmd_offset(a, b) ((void *) 0) - -#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */ -#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */ -#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ -#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ -#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ - -#define __swp_type(x) (0) -#define __swp_offset(x) (0) -#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#ifndef __ASSEMBLY__ -static inline int pte_file(pte_t pte) { return 0; } -#endif - -#define ZERO_PAGE(vaddr) ({ BUG(); NULL; }) - -#define swapper_pg_dir ((pgd_t *) NULL) - -#define pgtable_cache_init() do {} while (0) - -#include - -#else /* !CONFIG_MMU */ -/*****************************************************************************/ -/* - * then MMU operation - */ - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#ifndef __ASSEMBLY__ -extern unsigned long empty_zero_page; -#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page) -#endif - -/* - * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry) - * [see Documentation/frv/mmu-layout.txt] - * - * Page Directory: - * - Size: 16KB - * - 64 PGEs per PGD - * - Each PGE holds 1 PUD and covers 64MB - * - * Page Upper Directory: - * - Size: 256B - * - 1 PUE per PUD - * - Each PUE holds 1 PMD and covers 64MB - * - * Page Mid-Level Directory - * - Size: 256B - * - 1 PME per PMD - * - Each PME holds 64 STEs, all of which point to separate chunks of the same Page Table - * - All STEs are instantiated at the same time - * - * Page Table - * - Size: 16KB - * - 4096 PTEs per PT - * - Each Linux PT is subdivided into 64 FR451 PT's, each of which holds 64 entries - * - * Pages - * - Size: 4KB - * - * total PTEs - * = 1 PML4E * 64 PGEs * 1 PUEs * 1 PMEs * 4096 PTEs - * = 1 PML4E * 64 PGEs * 64 STEs * 64 PTEs/FR451-PT - * = 262144 (or 256 * 1024) - */ -#define PGDIR_SHIFT 26 -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE - 1)) -#define PTRS_PER_PGD 64 - -#define PUD_SHIFT 26 -#define PTRS_PER_PUD 1 -#define PUD_SIZE (1UL << PUD_SHIFT) -#define PUD_MASK (~(PUD_SIZE - 1)) -#define PUE_SIZE 256 - -#define PMD_SHIFT 26 -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE - 1)) -#define PTRS_PER_PMD 1 -#define PME_SIZE 256 - -#define __frv_PT_SIZE 256 - -#define PTRS_PER_PTE 4096 - -#define USER_PGDS_IN_LAST_PML4 (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS) - -#define TWOLEVEL_PGDIR_SHIFT 26 -#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) -#define BOOT_KERNEL_PGD_PTRS (PTRS_PER_PGD - BOOT_USER_PGD_PTRS) - -#ifndef __ASSEMBLY__ - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pud_ERROR(e) \ - printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(e))) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(pgd_val(e)))) - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) \ -do { \ - *(pteptr) = (pteval); \ - asm volatile("dcf %M0" :: "U"(*pteptr)); \ -} while(0) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * pgd_offset() returns a (pgd_t *) - * pgd_index() is used get the offset into the pgd page's array of pgd_t's; - */ -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* - * a shortcut which implies the use of the kernel's pgd, instead - * of a process's - */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pud is never bad, and a pud always exists (as it's folded - * into the pgd entry) - */ -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -static inline void pgd_clear(pgd_t *pgd) { } - -#define pgd_populate(mm, pgd, pud) do { } while (0) -/* - * (puds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pgd(pgdptr, pgdval) \ -do { \ - memcpy((pgdptr), &(pgdval), sizeof(pgd_t)); \ - asm volatile("dcf %M0" :: "U"(*(pgdptr))); \ -} while(0) - -static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) -{ - return (pud_t *) pgd; -} - -#define pgd_page(pgd) (pud_page((pud_t){ pgd })) -#define pgd_page_vaddr(pgd) (pud_page_vaddr((pud_t){ pgd })) - -/* - * allocating and freeing a pud is trivial: the 1-entry pud is - * inside the pgd, so has no extra memory associated with it. - */ -#define pud_alloc_one(mm, address) NULL -#define pud_free(mm, x) do { } while (0) -#define __pud_free_tlb(tlb, x) do { } while (0) - -/* - * The "pud_xxx()" functions here are trivial for a folded two-level - * setup: the pmd is never bad, and a pmd always exists (as it's folded - * into the pud entry) - */ -static inline int pud_none(pud_t pud) { return 0; } -static inline int pud_bad(pud_t pud) { return 0; } -static inline int pud_present(pud_t pud) { return 1; } -static inline void pud_clear(pud_t *pud) { } - -#define pud_populate(mm, pmd, pte) do { } while (0) - -/* - * (pmds are folded into puds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pud(pudptr, pudval) set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval }) - -#define pud_page(pud) (pmd_page((pmd_t){ pud })) -#define pud_page_vaddr(pud) (pmd_page_vaddr((pmd_t){ pud })) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -extern void __set_pmd(pmd_t *pmdptr, unsigned long __pmd); - -#define set_pmd(pmdptr, pmdval) \ -do { \ - __set_pmd((pmdptr), (pmdval).ste[0]); \ -} while(0) - -#define __pmd_index(address) 0 - -static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address) -{ - return (pmd_t *) dir + __pmd_index(address); -} - -#define pte_same(a, b) ((a).pte == (b).pte) -#define pte_page(x) (mem_map + ((unsigned long)(((x).pte >> PAGE_SHIFT)))) -#define pte_none(x) (!(x).pte) -#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT))) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#define VMALLOC_VMADDR(x) ((unsigned long) (x)) - -#endif /* !__ASSEMBLY__ */ - -/* - * control flags in AMPR registers and TLB entries - */ -#define _PAGE_BIT_PRESENT xAMPRx_V_BIT -#define _PAGE_BIT_WP DAMPRx_WP_BIT -#define _PAGE_BIT_NOCACHE xAMPRx_C_BIT -#define _PAGE_BIT_SUPER xAMPRx_S_BIT -#define _PAGE_BIT_ACCESSED xAMPRx_RESERVED8_BIT -#define _PAGE_BIT_DIRTY xAMPRx_M_BIT -#define _PAGE_BIT_NOTGLOBAL xAMPRx_NG_BIT - -#define _PAGE_PRESENT xAMPRx_V -#define _PAGE_WP DAMPRx_WP -#define _PAGE_NOCACHE xAMPRx_C -#define _PAGE_SUPER xAMPRx_S -#define _PAGE_ACCESSED xAMPRx_RESERVED8 /* accessed if set */ -#define _PAGE_DIRTY xAMPRx_M -#define _PAGE_NOTGLOBAL xAMPRx_NG - -#define _PAGE_RESERVED_MASK (xAMPRx_RESERVED8 | xAMPRx_RESERVED13) - -#define _PAGE_FILE 0x002 /* set:pagecache unset:swap */ -#define _PAGE_PROTNONE 0x000 /* If not present */ - -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -#define __PGPROT_BASE \ - (_PAGE_PRESENT | xAMPRx_SS_16Kb | xAMPRx_D | _PAGE_NOTGLOBAL | _PAGE_ACCESSED) - -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) -#define PAGE_SHARED __pgprot(__PGPROT_BASE) -#define PAGE_COPY __pgprot(__PGPROT_BASE | _PAGE_WP) -#define PAGE_READONLY __pgprot(__PGPROT_BASE | _PAGE_WP) - -#define __PAGE_KERNEL (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY) -#define __PAGE_KERNEL_NOCACHE (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_NOCACHE) -#define __PAGE_KERNEL_RO (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_WP) - -#define MAKE_GLOBAL(x) __pgprot((x) & ~_PAGE_NOTGLOBAL) - -#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL) -#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO) -#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE) - -#define _PAGE_TABLE (_PAGE_PRESENT | xAMPRx_SS_16Kb) - -#ifndef __ASSEMBLY__ - -/* - * The FR451 can do execute protection by virtue of having separate TLB miss handlers for - * instruction access and for data access. However, we don't have enough reserved bits to say - * "execute only", so we don't bother. If you can read it, you can execute it and vice versa. - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED - -/* - * Define this to warn about kernel memory accesses that are - * done without a 'access_ok(VERIFY_WRITE,..)' - */ -#undef TEST_ACCESS_OK - -#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) -#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) -#define pmd_bad(x) (pmd_val(x) & xAMPRx_SS) -#define pmd_clear(xp) do { __set_pmd(xp, 0); } while(0) - -#define pmd_page_vaddr(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) - -#ifndef CONFIG_DISCONTIGMEM -#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) -#endif - -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_dirty(pte_t pte) { return (pte).pte & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return (pte).pte & _PAGE_ACCESSED; } -static inline int pte_write(pte_t pte) { return !((pte).pte & _PAGE_WP); } -static inline int pte_special(pte_t pte) { return 0; } - -static inline pte_t pte_mkclean(pte_t pte) { (pte).pte &= ~_PAGE_DIRTY; return pte; } -static inline pte_t pte_mkold(pte_t pte) { (pte).pte &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_wrprotect(pte_t pte) { (pte).pte |= _PAGE_WP; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { (pte).pte |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { (pte).pte |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { (pte).pte &= ~_PAGE_WP; return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) -{ - int i = test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep); - asm volatile("dcf %M0" :: "U"(*ptep)); - return i; -} - -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - unsigned long x = xchg(&ptep->pte, 0); - asm volatile("dcf %M0" :: "U"(*ptep)); - return __pte(x); -} - -static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - set_bit(_PAGE_BIT_WP, ptep); - asm volatile("dcf %M0" :: "U"(*ptep)); -} - -/* - * Macro to mark a page protection value as "uncacheable" - */ -#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE)) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ - -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) -#define mk_pte_huge(entry) ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE) - -/* This takes a physical page address that is used by the remapping functions */ -#define mk_pte_phys(physpage, pgprot) pfn_pte((physpage) >> PAGE_SHIFT, pgprot) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte.pte &= _PAGE_CHG_MASK; - pte.pte |= pgprot_val(newprot); - return pte; -} - -/* to find an entry in a page-table-directory. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) -#define pgd_index_k(addr) pgd_index(addr) - -/* Find an entry in the bottom-level page table.. */ -#define __pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -/* - * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] - * - * this macro returns the index of the entry in the pte page which would - * control the given virtual address - */ -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) - -#if defined(CONFIG_HIGHPTE) -#define pte_offset_map(dir, address) \ - ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address)) -#define pte_offset_map_nested(dir, address) \ - ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address)) -#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) -#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1) -#else -#define pte_offset_map(dir, address) \ - ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address)) -#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address)) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) -#endif - -/* - * Handle swap and file entries - * - the PTE is encoded in the following format: - * bit 0: Must be 0 (!_PAGE_PRESENT) - * bit 1: Type: 0 for swap, 1 for file (_PAGE_FILE) - * bits 2-7: Swap type - * bits 8-31: Swap offset - * bits 2-31: File pgoff - */ -#define __swp_type(x) (((x).val >> 2) & 0x1f) -#define __swp_offset(x) ((x).val >> 8) -#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 8) }) -#define __pte_to_swp_entry(_pte) ((swp_entry_t) { (_pte).pte }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -static inline int pte_file(pte_t pte) -{ - return pte.pte & _PAGE_FILE; -} - -#define PTE_FILE_MAX_BITS 29 - -#define pte_to_pgoff(PTE) ((PTE).pte >> 2) -#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -#define PageSkip(page) (0) -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define __HAVE_ARCH_PTE_SAME -#include - -/* - * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache - */ -static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) -{ - struct mm_struct *mm; - unsigned long ampr; - - mm = current->mm; - if (mm) { - pgd_t *pge = pgd_offset(mm, address); - pud_t *pue = pud_offset(pge, address); - pmd_t *pme = pmd_offset(pue, address); - - ampr = pme->ste[0] & 0xffffff00; - ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | - xAMPRx_V; - } else { - address = ULONG_MAX; - ampr = 0; - } - - asm volatile("movgs %0,scr0\n" - "movgs %0,scr1\n" - "movgs %1,dampr4\n" - "movgs %1,dampr5\n" - : - : "r"(address), "r"(ampr) - ); -} - -#ifdef CONFIG_PROC_FS -extern char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer); -#endif - -extern void __init pgtable_cache_init(void); - -#endif /* !__ASSEMBLY__ */ -#endif /* !CONFIG_MMU */ - -#ifndef __ASSEMBLY__ -extern void __init paging_init(void); -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_PGTABLE_H */ diff --git a/include/asm-frv/poll.h b/include/asm-frv/poll.h deleted file mode 100644 index 0d01479..0000000 --- a/include/asm-frv/poll.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_POLL_H -#define _ASM_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 256 - -#include - -#undef POLLREMOVE - -#endif - diff --git a/include/asm-frv/posix_types.h b/include/asm-frv/posix_types.h deleted file mode 100644 index a9f1f5b..0000000 --- a/include/asm-frv/posix_types.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef _ASM_POSIX_TYPES_H -#define _ASM_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) - -#undef __FD_CLR -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) - -#undef __FD_ISSET -#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d))) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) - -#endif /* defined(__KERNEL__) */ - -#endif - diff --git a/include/asm-frv/processor.h b/include/asm-frv/processor.h deleted file mode 100644 index 3744f2e..0000000 --- a/include/asm-frv/processor.h +++ /dev/null @@ -1,153 +0,0 @@ -/* processor.h: FRV processor definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_PROCESSOR_H -#define _ASM_PROCESSOR_H - -#include - -#ifndef __ASSEMBLY__ -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - */ -struct cpuinfo_frv { -#ifdef CONFIG_MMU - unsigned long *pgd_quick; - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; -#endif -} __cacheline_aligned; - -extern struct cpuinfo_frv __nongprelbss boot_cpu_data; - -#define cpu_data (&boot_cpu_data) -#define current_cpu_data boot_cpu_data - -/* - * Bus types - */ -#define EISA_bus 0 -#define MCA_bus 0 - -struct thread_struct { - struct pt_regs *frame; /* [GR28] exception frame ptr for this thread */ - struct task_struct *curr; /* [GR29] current pointer for this thread */ - unsigned long sp; /* [GR1 ] kernel stack pointer */ - unsigned long fp; /* [GR2 ] kernel frame pointer */ - unsigned long lr; /* link register */ - unsigned long pc; /* program counter */ - unsigned long gr[12]; /* [GR16-GR27] */ - unsigned long sched_lr; /* LR from schedule() */ - - union { - struct pt_regs *frame0; /* top (user) stack frame */ - struct user_context *user; /* userspace context */ - }; -} __attribute__((aligned(8))); - -extern struct pt_regs *__kernel_frame0_ptr; -extern struct task_struct *__kernel_current_task; - -#endif - -#ifndef __ASSEMBLY__ -#define INIT_THREAD_FRAME0 \ - ((struct pt_regs *) \ - (sizeof(init_stack) + (unsigned long) init_stack - sizeof(struct user_context))) - -#define INIT_THREAD { \ - NULL, \ - (struct task_struct *) init_stack, \ - 0, 0, 0, 0, \ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ - 0, \ - { INIT_THREAD_FRAME0 }, \ -} - -/* - * do necessary setup to start up a newly executed thread. - * - need to discard the frame stacked by init() invoking the execve syscall - */ -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); /* reads from user space */ \ - __frame = __kernel_frame0_ptr; \ - __frame->pc = (_pc); \ - __frame->psr &= ~PSR_S; \ - __frame->sp = (_usp); \ -} while(0) - -extern void prepare_to_copy(struct task_struct *tsk); - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -extern asmlinkage int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); -extern asmlinkage void save_user_regs(struct user_context *target); -extern asmlinkage void *restore_user_regs(const struct user_context *target, ...); - -#define copy_segments(tsk, mm) do { } while (0) -#define release_segments(mm) do { } while (0) -#define forget_segments() do { } while (0) - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -/* - * Return saved PC of a blocked thread. - */ -extern unsigned long thread_saved_pc(struct task_struct *tsk); - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc) -#define KSTK_ESP(tsk) ((tsk)->thread.frame0->sp) - -/* Allocation and freeing of basic task resources. */ -extern struct task_struct *alloc_task_struct(void); -extern void free_task_struct(struct task_struct *p); - -#define cpu_relax() barrier() - -/* data cache prefetch */ -#define ARCH_HAS_PREFETCH -static inline void prefetch(const void *x) -{ - asm volatile("dcpl %0,gr0,#0" : : "r"(x)); -} - -#endif /* __ASSEMBLY__ */ -#endif /* _ASM_PROCESSOR_H */ diff --git a/include/asm-frv/ptrace.h b/include/asm-frv/ptrace.h deleted file mode 100644 index cf69340..0000000 --- a/include/asm-frv/ptrace.h +++ /dev/null @@ -1,83 +0,0 @@ -/* ptrace.h: ptrace() relevant definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_PTRACE_H -#define _ASM_PTRACE_H - -#include -#ifdef __KERNEL__ -#include - -#define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0) -#endif - - -#define PT_PSR 0 -#define PT_ISR 1 -#define PT_CCR 2 -#define PT_CCCR 3 -#define PT_LR 4 -#define PT_LCR 5 -#define PT_PC 6 - -#define PT__STATUS 7 /* exception status */ -#define PT_SYSCALLNO 8 /* syscall number or -1 */ -#define PT_ORIG_GR8 9 /* saved GR8 for signal handling */ -#define PT_GNER0 10 -#define PT_GNER1 11 -#define PT_IACC0H 12 -#define PT_IACC0L 13 - -#define PT_GR(j) ( 14 + (j)) /* GRj for 0<=j<=63 */ -#define PT_FR(j) ( 78 + (j)) /* FRj for 0<=j<=63 */ -#define PT_FNER(j) (142 + (j)) /* FNERj for 0<=j<=1 */ -#define PT_MSR(j) (144 + (j)) /* MSRj for 0<=j<=2 */ -#define PT_ACC(j) (146 + (j)) /* ACCj for 0<=j<=7 */ -#define PT_ACCG(jklm) (154 + (jklm)) /* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */ -#define PT_FSR(j) (156 + (j)) /* FSRj for 0<=j<=0 */ -#define PT__GPEND 78 -#define PT__END 157 - -#define PT_TBR PT_GR(0) -#define PT_SP PT_GR(1) -#define PT_FP PT_GR(2) -#define PT_PREV_FRAME PT_GR(28) /* previous exception frame pointer (old gr28 value) */ -#define PT_CURR_TASK PT_GR(29) /* current task */ - - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ - -#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ -#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -/* - * we dedicate GR28 to keeping a pointer to the current exception frame - * - gr28 is destroyed on entry to the kernel from userspace - */ -register struct pt_regs *__frame asm("gr28"); - -#define user_mode(regs) (!((regs)->psr & PSR_S)) -#define instruction_pointer(regs) ((regs)->pc) - -extern unsigned long user_stack(const struct pt_regs *); -extern void show_regs(struct pt_regs *); -#define profile_pc(regs) ((regs)->pc) -#endif - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_PTRACE_H */ diff --git a/include/asm-frv/registers.h b/include/asm-frv/registers.h deleted file mode 100644 index 9666119..0000000 --- a/include/asm-frv/registers.h +++ /dev/null @@ -1,232 +0,0 @@ -/* registers.h: register frame declarations - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * notes: - * - * (1) that the members of all these structures are carefully aligned to permit - * usage of STD/STDF instructions - * - * (2) if you change these structures, you must change the code in - * arch/frvnommu/kernel/{break.S,entry.S,switch_to.S,gdb-stub.c} - * - * - * the kernel stack space block looks like this: - * - * +0x2000 +---------------------- - * | union { - * | struct frv_frame0 { - * | struct user_context { - * | struct user_int_regs - * | struct user_fpmedia_regs - * | } - * | struct frv_debug_regs - * | } - * | struct pt_regs [user exception] - * | } - * +---------------------- <-- __kernel_frame0_ptr (maybe GR28) - * | - * | kernel stack - * | - * |...................... - * | struct pt_regs [kernel exception] - * |...................... <-- __kernel_frame0_ptr (maybe GR28) - * | - * | kernel stack - * | - * |...................... <-- stack pointer (GR1) - * | - * | unused stack space - * | - * +---------------------- - * | struct thread_info - * +0x0000 +---------------------- <-- __current_thread_info (GR15); - * - * note that GR28 points to the current exception frame - */ - -#ifndef _ASM_REGISTERS_H -#define _ASM_REGISTERS_H - -#ifndef __ASSEMBLY__ -#define __OFFSET(X,N) ((X)+(N)*4) -#define __OFFSETC(X,N) xxxxxxxxxxxxxxxxxxxxxxxx -#else -#define __OFFSET(X,N) ((X)+(N)*4) -#define __OFFSETC(X,N) ((X)+(N)) -#endif - -/*****************************************************************************/ -/* - * Exception/Interrupt frame - * - held on kernel stack - * - 8-byte aligned on stack (old SP is saved in frame) - * - GR0 is fixed 0, so we don't save it - */ -#ifndef __ASSEMBLY__ - -struct pt_regs { - unsigned long psr; /* Processor Status Register */ - unsigned long isr; /* Integer Status Register */ - unsigned long ccr; /* Condition Code Register */ - unsigned long cccr; /* Condition Code for Conditional Insns Register */ - unsigned long lr; /* Link Register */ - unsigned long lcr; /* Loop Count Register */ - unsigned long pc; /* Program Counter Register */ - unsigned long __status; /* exception status */ - unsigned long syscallno; /* syscall number or -1 */ - unsigned long orig_gr8; /* original syscall arg #1 */ - unsigned long gner0; - unsigned long gner1; - unsigned long long iacc0; - unsigned long tbr; /* GR0 is fixed zero, so we use this for TBR */ - unsigned long sp; /* GR1: USP/KSP */ - unsigned long fp; /* GR2: FP */ - unsigned long gr3; - unsigned long gr4; - unsigned long gr5; - unsigned long gr6; - unsigned long gr7; /* syscall number */ - unsigned long gr8; /* 1st syscall param; syscall return */ - unsigned long gr9; /* 2nd syscall param */ - unsigned long gr10; /* 3rd syscall param */ - unsigned long gr11; /* 4th syscall param */ - unsigned long gr12; /* 5th syscall param */ - unsigned long gr13; /* 6th syscall param */ - unsigned long gr14; - unsigned long gr15; - unsigned long gr16; /* GP pointer */ - unsigned long gr17; /* small data */ - unsigned long gr18; /* PIC/PID */ - unsigned long gr19; - unsigned long gr20; - unsigned long gr21; - unsigned long gr22; - unsigned long gr23; - unsigned long gr24; - unsigned long gr25; - unsigned long gr26; - unsigned long gr27; - struct pt_regs *next_frame; /* GR28 - next exception frame */ - unsigned long gr29; /* GR29 - OS reserved */ - unsigned long gr30; /* GR30 - OS reserved */ - unsigned long gr31; /* GR31 - OS reserved */ -} __attribute__((aligned(8))); - -#endif - -#define REG__STATUS_STEP 0x00000001 /* - reenable single stepping on return */ -#define REG__STATUS_STEPPED 0x00000002 /* - single step caused exception */ -#define REG__STATUS_BROKE 0x00000004 /* - BREAK insn caused exception */ -#define REG__STATUS_SYSC_ENTRY 0x40000000 /* - T on syscall entry (ptrace.c only) */ -#define REG__STATUS_SYSC_EXIT 0x80000000 /* - T on syscall exit (ptrace.c only) */ - -#define REG_GR(R) __OFFSET(REG_GR0, (R)) - -#define REG_SP REG_GR(1) -#define REG_FP REG_GR(2) -#define REG_PREV_FRAME REG_GR(28) /* previous exception frame pointer (old gr28 value) */ -#define REG_CURR_TASK REG_GR(29) /* current task */ - -/*****************************************************************************/ -/* - * debugging registers - */ -#ifndef __ASSEMBLY__ - -struct frv_debug_regs -{ - unsigned long dcr; - unsigned long ibar[4] __attribute__((aligned(8))); - unsigned long dbar[4] __attribute__((aligned(8))); - unsigned long dbdr[4][4] __attribute__((aligned(8))); - unsigned long dbmr[4][4] __attribute__((aligned(8))); -} __attribute__((aligned(8))); - -#endif - -/*****************************************************************************/ -/* - * userspace registers - */ -#ifndef __ASSEMBLY__ - -struct user_int_regs -{ - /* integer registers - * - up to gr[31] mirror pt_regs - * - total size must be multiple of 8 bytes - */ - unsigned long psr; /* Processor Status Register */ - unsigned long isr; /* Integer Status Register */ - unsigned long ccr; /* Condition Code Register */ - unsigned long cccr; /* Condition Code for Conditional Insns Register */ - unsigned long lr; /* Link Register */ - unsigned long lcr; /* Loop Count Register */ - unsigned long pc; /* Program Counter Register */ - unsigned long __status; /* exception status */ - unsigned long syscallno; /* syscall number or -1 */ - unsigned long orig_gr8; /* original syscall arg #1 */ - unsigned long gner[2]; - unsigned long long iacc[1]; - - union { - unsigned long tbr; - unsigned long gr[64]; - }; -}; - -struct user_fpmedia_regs -{ - /* FP/Media registers */ - unsigned long fr[64]; - unsigned long fner[2]; - unsigned long msr[2]; - unsigned long acc[8]; - unsigned char accg[8]; - unsigned long fsr[1]; -}; - -struct user_context -{ - struct user_int_regs i; - struct user_fpmedia_regs f; - - /* we provide a context extension so that we can save the regs for CPUs that - * implement many more of Fujitsu's lavish register spec - */ - void *extension; -} __attribute__((aligned(8))); - -struct frv_frame0 { - union { - struct pt_regs regs; - struct user_context uc; - }; - - struct frv_debug_regs debug; - -} __attribute__((aligned(32))); - -#endif - -#define __INT_GR(R) __OFFSET(__INT_GR0, (R)) - -#define __FPMEDIA_FR(R) __OFFSET(__FPMEDIA_FR0, (R)) -#define __FPMEDIA_FNER(R) __OFFSET(__FPMEDIA_FNER0, (R)) -#define __FPMEDIA_MSR(R) __OFFSET(__FPMEDIA_MSR0, (R)) -#define __FPMEDIA_ACC(R) __OFFSET(__FPMEDIA_ACC0, (R)) -#define __FPMEDIA_ACCG(R) __OFFSETC(__FPMEDIA_ACCG0, (R)) -#define __FPMEDIA_FSR(R) __OFFSET(__FPMEDIA_FSR0, (R)) - -#define __THREAD_GR(R) __OFFSET(__THREAD_GR16, (R) - 16) - -#endif /* _ASM_REGISTERS_H */ diff --git a/include/asm-frv/resource.h b/include/asm-frv/resource.h deleted file mode 100644 index 5fc6054..0000000 --- a/include/asm-frv/resource.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_RESOURCE_H -#define _ASM_RESOURCE_H - -#include - -#endif /* _ASM_RESOURCE_H */ - diff --git a/include/asm-frv/scatterlist.h b/include/asm-frv/scatterlist.h deleted file mode 100644 index 4bca8a2..0000000 --- a/include/asm-frv/scatterlist.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _ASM_SCATTERLIST_H -#define _ASM_SCATTERLIST_H - -#include - -/* - * Drivers must set either ->address or (preferred) page and ->offset - * to indicate where data must be transferred to/from. - * - * Using page is recommended since it handles highmem data as well as - * low mem. ->address is restricted to data which has a virtual mapping, and - * it will go away in the future. Updating to page can be automated very - * easily -- something like - * - * sg->address = some_ptr; - * - * can be rewritten as - * - * sg_set_buf(sg, some_ptr, length); - * - * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens - */ -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* for highmem, page offset */ - - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (0xffffffffUL) - -#endif /* !_ASM_SCATTERLIST_H */ diff --git a/include/asm-frv/sections.h b/include/asm-frv/sections.h deleted file mode 100644 index 17d0fb1..0000000 --- a/include/asm-frv/sections.h +++ /dev/null @@ -1,46 +0,0 @@ -/* sections.h: linkage layout variables - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SECTIONS_H -#define _ASM_SECTIONS_H - -#ifndef __ASSEMBLY__ - -#include -#include - -#ifdef __KERNEL__ - -/* - * we don't want to put variables in the GP-REL section if they're not used very much - that would - * be waste since GP-REL addressing is limited to GP16+/-2048 - */ -#define __nongpreldata __attribute__((section(".data"))) -#define __nongprelbss __attribute__((section(".bss"))) - -/* - * linker symbols - */ -extern const void __kernel_image_start, __kernel_image_end, __page_offset; - -extern unsigned long __nongprelbss memory_start; -extern unsigned long __nongprelbss memory_end; -extern unsigned long __nongprelbss rom_length; - -/* determine if we're running from ROM */ -static inline int is_in_rom(unsigned long addr) -{ - return 0; /* default case: not in ROM */ -} - -#endif -#endif -#endif /* _ASM_SECTIONS_H */ diff --git a/include/asm-frv/segment.h b/include/asm-frv/segment.h deleted file mode 100644 index e3616a6..0000000 --- a/include/asm-frv/segment.h +++ /dev/null @@ -1,45 +0,0 @@ -/* segment.h: MMU segment settings - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SEGMENT_H -#define _ASM_SEGMENT_H - - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0xdfffffffUL) - -#ifdef CONFIG_MMU -#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) -#else -#define USER_DS KERNEL_DS -#endif - -#define get_ds() (KERNEL_DS) -#define get_fs() (__current_thread_info->addr_limit) -#define segment_eq(a,b) ((a).seg == (b).seg) -#define __kernel_ds_p() segment_eq(get_fs(), KERNEL_DS) -#define get_addr_limit() (get_fs().seg) - -#define set_fs(_x) \ -do { \ - __current_thread_info->addr_limit = (_x); \ -} while(0) - - -#endif /* __ASSEMBLY__ */ -#endif /* _ASM_SEGMENT_H */ diff --git a/include/asm-frv/sembuf.h b/include/asm-frv/sembuf.h deleted file mode 100644 index 164b127..0000000 --- a/include/asm-frv/sembuf.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _ASM_SEMBUF_H -#define _ASM_SEMBUF_H - -/* - * The semid64_ds structure for FR-V architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SEMBUF_H */ - diff --git a/include/asm-frv/serial-regs.h b/include/asm-frv/serial-regs.h deleted file mode 100644 index e1286bd..0000000 --- a/include/asm-frv/serial-regs.h +++ /dev/null @@ -1,44 +0,0 @@ -/* serial-regs.h: serial port registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SERIAL_REGS_H -#define _ASM_SERIAL_REGS_H - -#include -#include - -#define SERIAL_ICLK 33333333 /* the target serial input clock */ -#define UART0_BASE 0xfeff9c00 -#define UART1_BASE 0xfeff9c40 - -#define __get_UART0(R) ({ __reg(UART0_BASE + (R) * 8) >> 24; }) -#define __get_UART1(R) ({ __reg(UART1_BASE + (R) * 8) >> 24; }) -#define __set_UART0(R,V) do { __reg(UART0_BASE + (R) * 8) = (V) << 24; } while(0) -#define __set_UART1(R,V) do { __reg(UART1_BASE + (R) * 8) = (V) << 24; } while(0) - -#define __get_UART0_LSR() ({ __get_UART0(UART_LSR); }) -#define __get_UART1_LSR() ({ __get_UART1(UART_LSR); }) - -#define __set_UART0_IER(V) __set_UART0(UART_IER,(V)) -#define __set_UART1_IER(V) __set_UART1(UART_IER,(V)) - -/* serial prescaler select register */ -#define __get_UCPSR() ({ *(volatile unsigned long *)(0xfeff9c90); }) -#define __set_UCPSR(V) do { *(volatile unsigned long *)(0xfeff9c90) = (V); } while(0) -#define UCPSR_SELECT0 0x07000000 -#define UCPSR_SELECT1 0x38000000 - -/* serial prescaler base value register */ -#define __get_UCPVR() ({ *(volatile unsigned long *)(0xfeff9c98); mb(); }) -#define __set_UCPVR(V) do { *(volatile unsigned long *)(0xfeff9c98) = (V) << 24; mb(); } while(0) - - -#endif /* _ASM_SERIAL_REGS_H */ diff --git a/include/asm-frv/serial.h b/include/asm-frv/serial.h deleted file mode 100644 index dbb8259..0000000 --- a/include/asm-frv/serial.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * serial.h - * - * Copyright (C) 2003 Develer S.r.l. (http://www.develer.com/) - * Author: Bernardo Innocenti - * - * Based on linux/include/asm-i386/serial.h - */ -#include - -/* - * the base baud is derived from the clock speed and so is variable - */ -#define BASE_BAUD 0 - -#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF - -#define SERIAL_PORT_DFNS diff --git a/include/asm-frv/setup.h b/include/asm-frv/setup.h deleted file mode 100644 index afd787c..0000000 --- a/include/asm-frv/setup.h +++ /dev/null @@ -1,31 +0,0 @@ -/* setup.h: setup stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SETUP_H -#define _ASM_SETUP_H - -#define COMMAND_LINE_SIZE 512 - -#ifdef __KERNEL__ - -#include - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MMU -extern unsigned long __initdata num_mappedpages; -#endif - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_SETUP_H */ diff --git a/include/asm-frv/shmbuf.h b/include/asm-frv/shmbuf.h deleted file mode 100644 index 4c6e711..0000000 --- a/include/asm-frv/shmbuf.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef _ASM_SHMBUF_H -#define _ASM_SHMBUF_H - -/* - * The shmid64_ds structure for FR-V architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SHMBUF_H */ - diff --git a/include/asm-frv/shmparam.h b/include/asm-frv/shmparam.h deleted file mode 100644 index ab71100..0000000 --- a/include/asm-frv/shmparam.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_SHMPARAM_H -#define _ASM_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_SHMPARAM_H */ - diff --git a/include/asm-frv/sigcontext.h b/include/asm-frv/sigcontext.h deleted file mode 100644 index 3b263f3..0000000 --- a/include/asm-frv/sigcontext.h +++ /dev/null @@ -1,26 +0,0 @@ -/* sigcontext.h: FRV signal context - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_SIGCONTEXT_H -#define _ASM_SIGCONTEXT_H - -#include - -/* - * Signal context structure - contains all info to do with the state - * before the signal handler was invoked. Note: only add new entries - * to the end of the structure. - */ -struct sigcontext { - struct user_context sc_context; - unsigned long sc_oldmask; /* old sigmask */ -} __attribute__((aligned(8))); - -#endif diff --git a/include/asm-frv/siginfo.h b/include/asm-frv/siginfo.h deleted file mode 100644 index d3fd1ca..0000000 --- a/include/asm-frv/siginfo.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_SIGINFO_H -#define _ASM_SIGINFO_H - -#include -#include - -#define FPE_MDAOVF (__SI_FAULT|9) /* media overflow */ -#undef NSIGFPE -#define NSIGFPE 9 - -#endif - diff --git a/include/asm-frv/signal.h b/include/asm-frv/signal.h deleted file mode 100644 index 2079197..0000000 --- a/include/asm-frv/signal.h +++ /dev/null @@ -1,161 +0,0 @@ -#ifndef _ASM_SIGNAL_H -#define _ASM_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX (_NSIG-1) - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#ifdef __KERNEL__ - -#include -#undef __HAVE_ARCH_SIG_BITOPS - -#endif /* __KERNEL__ */ - -#endif /* _ASM_SIGNAL_H */ diff --git a/include/asm-frv/smp.h b/include/asm-frv/smp.h deleted file mode 100644 index 38349ec..0000000 --- a/include/asm-frv/smp.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_SMP_H -#define __ASM_SMP_H - - -#ifdef CONFIG_SMP -#error SMP not supported -#endif - -#endif diff --git a/include/asm-frv/socket.h b/include/asm-frv/socket.h deleted file mode 100644 index 57c3d40..0000000 --- a/include/asm-frv/socket.h +++ /dev/null @@ -1,61 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* _ASM_SOCKET_H */ - diff --git a/include/asm-frv/sockios.h b/include/asm-frv/sockios.h deleted file mode 100644 index 5dbdd13..0000000 --- a/include/asm-frv/sockios.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _ASM_SOCKIOS__ -#define _ASM_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_SOCKIOS__ */ - diff --git a/include/asm-frv/spinlock.h b/include/asm-frv/spinlock.h deleted file mode 100644 index fe385f4..0000000 --- a/include/asm-frv/spinlock.h +++ /dev/null @@ -1,17 +0,0 @@ -/* spinlock.h: spinlocks for FR-V - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SPINLOCK_H -#define _ASM_SPINLOCK_H - -#error no spinlocks for FR-V yet - -#endif /* _ASM_SPINLOCK_H */ diff --git a/include/asm-frv/spr-regs.h b/include/asm-frv/spr-regs.h deleted file mode 100644 index 01e6af5..0000000 --- a/include/asm-frv/spr-regs.h +++ /dev/null @@ -1,416 +0,0 @@ -/* spr-regs.h: special-purpose registers on the FRV - * - * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SPR_REGS_H -#define _ASM_SPR_REGS_H - -/* - * PSR - Processor Status Register - */ -#define PSR_ET 0x00000001 /* enable interrupts/exceptions flag */ -#define PSR_PS 0x00000002 /* previous supervisor mode flag */ -#define PSR_S 0x00000004 /* supervisor mode flag */ -#define PSR_PIL 0x00000078 /* processor external interrupt level */ -#define PSR_PIL_0 0x00000000 /* - no interrupt in progress */ -#define PSR_PIL_13 0x00000068 /* - debugging only */ -#define PSR_PIL_14 0x00000070 /* - debugging in progress */ -#define PSR_PIL_15 0x00000078 /* - NMI in progress */ -#define PSR_EM 0x00000080 /* enable media operation */ -#define PSR_EF 0x00000100 /* enable FPU operation */ -#define PSR_BE 0x00001000 /* endianness mode */ -#define PSR_BE_LE 0x00000000 /* - little endian mode */ -#define PSR_BE_BE 0x00001000 /* - big endian mode */ -#define PSR_CM 0x00002000 /* conditional mode */ -#define PSR_NEM 0x00004000 /* non-excepting mode */ -#define PSR_ICE 0x00010000 /* in-circuit emulation mode */ -#define PSR_VERSION_SHIFT 24 /* CPU silicon ID */ -#define PSR_IMPLE_SHIFT 28 /* CPU core ID */ - -#define PSR_VERSION(psr) (((psr) >> PSR_VERSION_SHIFT) & 0xf) -#define PSR_IMPLE(psr) (((psr) >> PSR_IMPLE_SHIFT) & 0xf) - -#define PSR_IMPLE_FR401 0x2 -#define PSR_VERSION_FR401_MB93401 0x0 -#define PSR_VERSION_FR401_MB93401A 0x1 -#define PSR_VERSION_FR401_MB93403 0x2 - -#define PSR_IMPLE_FR405 0x4 -#define PSR_VERSION_FR405_MB93405 0x0 - -#define PSR_IMPLE_FR451 0x5 -#define PSR_VERSION_FR451_MB93451 0x0 - -#define PSR_IMPLE_FR501 0x1 -#define PSR_VERSION_FR501_MB93501 0x1 -#define PSR_VERSION_FR501_MB93501A 0x2 - -#define PSR_IMPLE_FR551 0x3 -#define PSR_VERSION_FR551_MB93555 0x1 - -#define __get_PSR() ({ unsigned long x; asm volatile("movsg psr,%0" : "=r"(x)); x; }) -#define __set_PSR(V) do { asm volatile("movgs %0,psr" : : "r"(V)); } while(0) - -/* - * TBR - Trap Base Register - */ -#define TBR_TT 0x00000ff0 -#define TBR_TT_INSTR_MMU_MISS (0x01 << 4) -#define TBR_TT_INSTR_ACC_ERROR (0x02 << 4) -#define TBR_TT_INSTR_ACC_EXCEP (0x03 << 4) -#define TBR_TT_PRIV_INSTR (0x06 << 4) -#define TBR_TT_ILLEGAL_INSTR (0x07 << 4) -#define TBR_TT_FP_EXCEPTION (0x0d << 4) -#define TBR_TT_MP_EXCEPTION (0x0e << 4) -#define TBR_TT_DATA_ACC_ERROR (0x11 << 4) -#define TBR_TT_DATA_MMU_MISS (0x12 << 4) -#define TBR_TT_DATA_ACC_EXCEP (0x13 << 4) -#define TBR_TT_DATA_STR_ERROR (0x14 << 4) -#define TBR_TT_DIVISION_EXCEP (0x17 << 4) -#define TBR_TT_COMMIT_EXCEP (0x19 << 4) -#define TBR_TT_INSTR_TLB_MISS (0x1a << 4) -#define TBR_TT_DATA_TLB_MISS (0x1b << 4) -#define TBR_TT_DATA_DAT_EXCEP (0x1d << 4) -#define TBR_TT_DECREMENT_TIMER (0x1f << 4) -#define TBR_TT_COMPOUND_EXCEP (0x20 << 4) -#define TBR_TT_INTERRUPT_1 (0x21 << 4) -#define TBR_TT_INTERRUPT_2 (0x22 << 4) -#define TBR_TT_INTERRUPT_3 (0x23 << 4) -#define TBR_TT_INTERRUPT_4 (0x24 << 4) -#define TBR_TT_INTERRUPT_5 (0x25 << 4) -#define TBR_TT_INTERRUPT_6 (0x26 << 4) -#define TBR_TT_INTERRUPT_7 (0x27 << 4) -#define TBR_TT_INTERRUPT_8 (0x28 << 4) -#define TBR_TT_INTERRUPT_9 (0x29 << 4) -#define TBR_TT_INTERRUPT_10 (0x2a << 4) -#define TBR_TT_INTERRUPT_11 (0x2b << 4) -#define TBR_TT_INTERRUPT_12 (0x2c << 4) -#define TBR_TT_INTERRUPT_13 (0x2d << 4) -#define TBR_TT_INTERRUPT_14 (0x2e << 4) -#define TBR_TT_INTERRUPT_15 (0x2f << 4) -#define TBR_TT_TRAP0 (0x80 << 4) -#define TBR_TT_TRAP1 (0x81 << 4) -#define TBR_TT_TRAP2 (0x82 << 4) -#define TBR_TT_TRAP3 (0x83 << 4) -#define TBR_TT_TRAP120 (0xf8 << 4) -#define TBR_TT_TRAP121 (0xf9 << 4) -#define TBR_TT_TRAP122 (0xfa << 4) -#define TBR_TT_TRAP123 (0xfb << 4) -#define TBR_TT_TRAP124 (0xfc << 4) -#define TBR_TT_TRAP125 (0xfd << 4) -#define TBR_TT_TRAP126 (0xfe << 4) -#define TBR_TT_BREAK (0xff << 4) - -#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120 -#define TBR_TT_ATOMIC_XCHG32 TBR_TT_TRAP121 -#define TBR_TT_ATOMIC_XOR TBR_TT_TRAP122 -#define TBR_TT_ATOMIC_OR TBR_TT_TRAP123 -#define TBR_TT_ATOMIC_AND TBR_TT_TRAP124 -#define TBR_TT_ATOMIC_SUB TBR_TT_TRAP125 -#define TBR_TT_ATOMIC_ADD TBR_TT_TRAP126 - -#define __get_TBR() ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; }) - -/* - * HSR0 - Hardware Status Register 0 - */ -#define HSR0_PDM 0x00000007 /* power down mode */ -#define HSR0_PDM_NORMAL 0x00000000 /* - normal mode */ -#define HSR0_PDM_CORE_SLEEP 0x00000001 /* - CPU core sleep mode */ -#define HSR0_PDM_BUS_SLEEP 0x00000003 /* - bus sleep mode */ -#define HSR0_PDM_PLL_RUN 0x00000005 /* - PLL run */ -#define HSR0_PDM_PLL_STOP 0x00000007 /* - PLL stop */ -#define HSR0_GRLE 0x00000040 /* GR lower register set enable */ -#define HSR0_GRHE 0x00000080 /* GR higher register set enable */ -#define HSR0_FRLE 0x00000100 /* FR lower register set enable */ -#define HSR0_FRHE 0x00000200 /* FR higher register set enable */ -#define HSR0_GRN 0x00000400 /* GR quantity */ -#define HSR0_GRN_64 0x00000000 /* - 64 GR registers */ -#define HSR0_GRN_32 0x00000400 /* - 32 GR registers */ -#define HSR0_FRN 0x00000800 /* FR quantity */ -#define HSR0_FRN_64 0x00000000 /* - 64 FR registers */ -#define HSR0_FRN_32 0x00000800 /* - 32 FR registers */ -#define HSR0_SA 0x00001000 /* start address (RAMBOOT#) */ -#define HSR0_ETMI 0x00008000 /* enable TIMERI (64-bit up timer) */ -#define HSR0_ETMD 0x00004000 /* enable TIMERD (32-bit down timer) */ -#define HSR0_PEDAT 0x00010000 /* previous DAT mode */ -#define HSR0_XEDAT 0x00020000 /* exception DAT mode */ -#define HSR0_EDAT 0x00080000 /* enable DAT mode */ -#define HSR0_RME 0x00400000 /* enable RAM mode */ -#define HSR0_EMEM 0x00800000 /* enable MMU_Miss mask */ -#define HSR0_EXMMU 0x01000000 /* enable extended MMU mode */ -#define HSR0_EDMMU 0x02000000 /* enable data MMU */ -#define HSR0_EIMMU 0x04000000 /* enable instruction MMU */ -#define HSR0_CBM 0x08000000 /* copy back mode */ -#define HSR0_CBM_WRITE_THRU 0x00000000 /* - write through */ -#define HSR0_CBM_COPY_BACK 0x08000000 /* - copy back */ -#define HSR0_NWA 0x10000000 /* no write allocate */ -#define HSR0_DCE 0x40000000 /* data cache enable */ -#define HSR0_ICE 0x80000000 /* instruction cache enable */ - -#define __get_HSR(R) ({ unsigned long x; asm volatile("movsg hsr"#R",%0" : "=r"(x)); x; }) -#define __set_HSR(R,V) do { asm volatile("movgs %0,hsr"#R : : "r"(V)); } while(0) - -/* - * CCR - Condition Codes Register - */ -#define CCR_FCC0 0x0000000f /* FP/Media condition 0 (fcc0 reg) */ -#define CCR_FCC1 0x000000f0 /* FP/Media condition 1 (fcc1 reg) */ -#define CCR_FCC2 0x00000f00 /* FP/Media condition 2 (fcc2 reg) */ -#define CCR_FCC3 0x0000f000 /* FP/Media condition 3 (fcc3 reg) */ -#define CCR_ICC0 0x000f0000 /* Integer condition 0 (icc0 reg) */ -#define CCR_ICC0_C 0x00010000 /* - Carry flag */ -#define CCR_ICC0_V 0x00020000 /* - Overflow flag */ -#define CCR_ICC0_Z 0x00040000 /* - Zero flag */ -#define CCR_ICC0_N 0x00080000 /* - Negative flag */ -#define CCR_ICC1 0x00f00000 /* Integer condition 1 (icc1 reg) */ -#define CCR_ICC2 0x0f000000 /* Integer condition 2 (icc2 reg) */ -#define CCR_ICC3 0xf0000000 /* Integer condition 3 (icc3 reg) */ - -/* - * CCCR - Condition Codes for Conditional Instructions Register - */ -#define CCCR_CC0 0x00000003 /* condition 0 (cc0 reg) */ -#define CCCR_CC0_FALSE 0x00000002 /* - condition is false */ -#define CCCR_CC0_TRUE 0x00000003 /* - condition is true */ -#define CCCR_CC1 0x0000000c /* condition 1 (cc1 reg) */ -#define CCCR_CC2 0x00000030 /* condition 2 (cc2 reg) */ -#define CCCR_CC3 0x000000c0 /* condition 3 (cc3 reg) */ -#define CCCR_CC4 0x00000300 /* condition 4 (cc4 reg) */ -#define CCCR_CC5 0x00000c00 /* condition 5 (cc5 reg) */ -#define CCCR_CC6 0x00003000 /* condition 6 (cc6 reg) */ -#define CCCR_CC7 0x0000c000 /* condition 7 (cc7 reg) */ - -/* - * ISR - Integer Status Register - */ -#define ISR_EMAM 0x00000001 /* memory misaligned access handling */ -#define ISR_EMAM_EXCEPTION 0x00000000 /* - generate exception */ -#define ISR_EMAM_FUDGE 0x00000001 /* - mask out invalid address bits */ -#define ISR_AEXC 0x00000004 /* accrued [overflow] exception */ -#define ISR_DTT 0x00000018 /* division type trap */ -#define ISR_DTT_IGNORE 0x00000000 /* - ignore division error */ -#define ISR_DTT_DIVBYZERO 0x00000008 /* - generate exception */ -#define ISR_DTT_OVERFLOW 0x00000010 /* - record overflow */ -#define ISR_EDE 0x00000020 /* enable division exception */ -#define ISR_PLI 0x20000000 /* pre-load instruction information */ -#define ISR_QI 0x80000000 /* quad data implementation information */ - -/* - * EPCR0 - Exception PC Register - */ -#define EPCR0_V 0x00000001 /* register content validity indicator */ -#define EPCR0_PC 0xfffffffc /* faulting instruction address */ - -/* - * ESR0/14/15 - Exception Status Register - */ -#define ESRx_VALID 0x00000001 /* register content validity indicator */ -#define ESRx_EC 0x0000003e /* exception type */ -#define ESRx_EC_DATA_STORE 0x00000000 /* - data_store_error */ -#define ESRx_EC_INSN_ACCESS 0x00000006 /* - instruction_access_error */ -#define ESRx_EC_PRIV_INSN 0x00000008 /* - privileged_instruction */ -#define ESRx_EC_ILL_INSN 0x0000000a /* - illegal_instruction */ -#define ESRx_EC_MP_EXCEP 0x0000001c /* - mp_exception */ -#define ESRx_EC_DATA_ACCESS 0x00000020 /* - data_access_error */ -#define ESRx_EC_DIVISION 0x00000026 /* - division_exception */ -#define ESRx_EC_ITLB_MISS 0x00000034 /* - instruction_access_TLB_miss */ -#define ESRx_EC_DTLB_MISS 0x00000036 /* - data_access_TLB_miss */ -#define ESRx_EC_DATA_ACCESS_DAT 0x0000003a /* - data_access_DAT_exception */ - -#define ESR0_IAEC 0x00000100 /* info for instruction-access-exception */ -#define ESR0_IAEC_RESV 0x00000000 /* - reserved */ -#define ESR0_IAEC_PROT_VIOL 0x00000100 /* - protection violation */ - -#define ESR0_ATXC 0x00f00000 /* address translation exception code */ -#define ESR0_ATXC_MMU_MISS 0x00000000 /* - MMU miss exception and more (?) */ -#define ESR0_ATXC_MULTI_DAT 0x00800000 /* - multiple DAT entry hit */ -#define ESR0_ATXC_MULTI_SAT 0x00900000 /* - multiple SAT entry hit */ -#define ESR0_ATXC_AMRTLB_MISS 0x00a00000 /* - MMU/TLB miss exception */ -#define ESR0_ATXC_PRIV_EXCEP 0x00c00000 /* - privilege protection fault */ -#define ESR0_ATXC_WP_EXCEP 0x00d00000 /* - write protection fault */ - -#define ESR0_EAV 0x00000800 /* true if EAR0 register valid */ -#define ESR15_EAV 0x00000800 /* true if EAR15 register valid */ - -/* - * ESFR1 - Exception Status Valid Flag Register - */ -#define ESFR1_ESR0 0x00000001 /* true if ESR0 is valid */ -#define ESFR1_ESR14 0x00004000 /* true if ESR14 is valid */ -#define ESFR1_ESR15 0x00008000 /* true if ESR15 is valid */ - -/* - * MSR - Media Status Register - */ -#define MSR0_AOVF 0x00000001 /* overflow exception accrued */ -#define MSRx_OVF 0x00000002 /* overflow exception detected */ -#define MSRx_SIE 0x0000003c /* last SIMD instruction exception detected */ -#define MSRx_SIE_NONE 0x00000000 /* - none detected */ -#define MSRx_SIE_FRkHI_ACCk 0x00000020 /* - exception at FRkHI or ACCk */ -#define MSRx_SIE_FRkLO_ACCk1 0x00000010 /* - exception at FRkLO or ACCk+1 */ -#define MSRx_SIE_FRk1HI_ACCk2 0x00000008 /* - exception at FRk+1HI or ACCk+2 */ -#define MSRx_SIE_FRk1LO_ACCk3 0x00000004 /* - exception at FRk+1LO or ACCk+3 */ -#define MSR0_MTT 0x00007000 /* type of last media trap detected */ -#define MSR0_MTT_NONE 0x00000000 /* - none detected */ -#define MSR0_MTT_OVERFLOW 0x00001000 /* - overflow detected */ -#define MSR0_HI 0x00c00000 /* hardware implementation */ -#define MSR0_HI_ROUNDING 0x00000000 /* - rounding mode */ -#define MSR0_HI_NONROUNDING 0x00c00000 /* - non-rounding mode */ -#define MSR0_EMCI 0x01000000 /* enable media custom instructions */ -#define MSR0_SRDAV 0x10000000 /* select rounding mode of MAVEH */ -#define MSR0_SRDAV_RDAV 0x00000000 /* - controlled by MSR.RDAV */ -#define MSR0_SRDAV_RD 0x10000000 /* - controlled by MSR.RD */ -#define MSR0_RDAV 0x20000000 /* rounding mode of MAVEH */ -#define MSR0_RDAV_NEAREST_MI 0x00000000 /* - round to nearest minus */ -#define MSR0_RDAV_NEAREST_PL 0x20000000 /* - round to nearest plus */ -#define MSR0_RD 0xc0000000 /* rounding mode */ -#define MSR0_RD_NEAREST 0x00000000 /* - nearest */ -#define MSR0_RD_ZERO 0x40000000 /* - zero */ -#define MSR0_RD_POS_INF 0x80000000 /* - postive infinity */ -#define MSR0_RD_NEG_INF 0xc0000000 /* - negative infinity */ - -/* - * IAMPR0-7 - Instruction Address Mapping Register - * DAMPR0-7 - Data Address Mapping Register - */ -#define xAMPRx_V 0x00000001 /* register content validity indicator */ -#define DAMPRx_WP 0x00000002 /* write protect */ -#define DAMPRx_WP_RW 0x00000000 /* - read/write */ -#define DAMPRx_WP_RO 0x00000002 /* - read-only */ -#define xAMPRx_C 0x00000004 /* cached/uncached */ -#define xAMPRx_C_CACHED 0x00000000 /* - cached */ -#define xAMPRx_C_UNCACHED 0x00000004 /* - uncached */ -#define xAMPRx_S 0x00000008 /* supervisor only */ -#define xAMPRx_S_USER 0x00000000 /* - userspace can access */ -#define xAMPRx_S_KERNEL 0x00000008 /* - kernel only */ -#define xAMPRx_SS 0x000000f0 /* segment size */ -#define xAMPRx_SS_16Kb 0x00000000 /* - 16 kilobytes */ -#define xAMPRx_SS_64Kb 0x00000010 /* - 64 kilobytes */ -#define xAMPRx_SS_256Kb 0x00000020 /* - 256 kilobytes */ -#define xAMPRx_SS_1Mb 0x00000030 /* - 1 megabyte */ -#define xAMPRx_SS_2Mb 0x00000040 /* - 2 megabytes */ -#define xAMPRx_SS_4Mb 0x00000050 /* - 4 megabytes */ -#define xAMPRx_SS_8Mb 0x00000060 /* - 8 megabytes */ -#define xAMPRx_SS_16Mb 0x00000070 /* - 16 megabytes */ -#define xAMPRx_SS_32Mb 0x00000080 /* - 32 megabytes */ -#define xAMPRx_SS_64Mb 0x00000090 /* - 64 megabytes */ -#define xAMPRx_SS_128Mb 0x000000a0 /* - 128 megabytes */ -#define xAMPRx_SS_256Mb 0x000000b0 /* - 256 megabytes */ -#define xAMPRx_SS_512Mb 0x000000c0 /* - 512 megabytes */ -#define xAMPRx_RESERVED8 0x00000100 /* reserved bit */ -#define xAMPRx_NG 0x00000200 /* non-global */ -#define xAMPRx_L 0x00000400 /* locked */ -#define xAMPRx_M 0x00000800 /* modified */ -#define xAMPRx_D 0x00001000 /* DAT entry */ -#define xAMPRx_RESERVED13 0x00002000 /* reserved bit */ -#define xAMPRx_PPFN 0xfff00000 /* physical page frame number */ - -#define xAMPRx_V_BIT 0 -#define DAMPRx_WP_BIT 1 -#define xAMPRx_C_BIT 2 -#define xAMPRx_S_BIT 3 -#define xAMPRx_RESERVED8_BIT 8 -#define xAMPRx_NG_BIT 9 -#define xAMPRx_L_BIT 10 -#define xAMPRx_M_BIT 11 -#define xAMPRx_D_BIT 12 -#define xAMPRx_RESERVED13_BIT 13 - -#define __get_IAMPR(R) ({ unsigned long x; asm volatile("movsg iampr"#R",%0" : "=r"(x)); x; }) -#define __get_DAMPR(R) ({ unsigned long x; asm volatile("movsg dampr"#R",%0" : "=r"(x)); x; }) - -#define __get_IAMLR(R) ({ unsigned long x; asm volatile("movsg iamlr"#R",%0" : "=r"(x)); x; }) -#define __get_DAMLR(R) ({ unsigned long x; asm volatile("movsg damlr"#R",%0" : "=r"(x)); x; }) - -#define __set_IAMPR(R,V) do { asm volatile("movgs %0,iampr"#R : : "r"(V)); } while(0) -#define __set_DAMPR(R,V) do { asm volatile("movgs %0,dampr"#R : : "r"(V)); } while(0) - -#define __set_IAMLR(R,V) do { asm volatile("movgs %0,iamlr"#R : : "r"(V)); } while(0) -#define __set_DAMLR(R,V) do { asm volatile("movgs %0,damlr"#R : : "r"(V)); } while(0) - -#define save_dampr(R, _dampr) \ -do { \ - asm volatile("movsg dampr"R",%0" : "=r"(_dampr)); \ -} while(0) - -#define restore_dampr(R, _dampr) \ -do { \ - asm volatile("movgs %0,dampr"R :: "r"(_dampr)); \ -} while(0) - -/* - * AMCR - Address Mapping Control Register - */ -#define AMCR_IAMRN 0x000000ff /* quantity of IAMPR registers */ -#define AMCR_DAMRN 0x0000ff00 /* quantity of DAMPR registers */ - -/* - * TTBR - Address Translation Table Base Register - */ -#define __get_TTBR() ({ unsigned long x; asm volatile("movsg ttbr,%0" : "=r"(x)); x; }) - -/* - * TPXR - TLB Probe Extend Register - */ -#define TPXR_E 0x00000001 -#define TPXR_LMAX_SHIFT 20 -#define TPXR_LMAX_SMASK 0xf -#define TPXR_WMAX_SHIFT 24 -#define TPXR_WMAX_SMASK 0xf -#define TPXR_WAY_SHIFT 28 -#define TPXR_WAY_SMASK 0xf - -/* - * DCR - Debug Control Register - */ -#define DCR_IBCE3 0x00000001 /* break on conditional insn pointed to by IBAR3 */ -#define DCR_IBE3 0x00000002 /* break on insn pointed to by IBAR3 */ -#define DCR_IBCE1 0x00000004 /* break on conditional insn pointed to by IBAR2 */ -#define DCR_IBE1 0x00000008 /* break on insn pointed to by IBAR2 */ -#define DCR_IBCE2 0x00000010 /* break on conditional insn pointed to by IBAR1 */ -#define DCR_IBE2 0x00000020 /* break on insn pointed to by IBAR1 */ -#define DCR_IBCE0 0x00000040 /* break on conditional insn pointed to by IBAR0 */ -#define DCR_IBE0 0x00000080 /* break on insn pointed to by IBAR0 */ - -#define DCR_DDBE1 0x00004000 /* use DBDR1x when checking DBAR1 */ -#define DCR_DWBE1 0x00008000 /* break on store to address in DBAR1/DBMR1x */ -#define DCR_DRBE1 0x00010000 /* break on load from address in DBAR1/DBMR1x */ -#define DCR_DDBE0 0x00020000 /* use DBDR0x when checking DBAR0 */ -#define DCR_DWBE0 0x00040000 /* break on store to address in DBAR0/DBMR0x */ -#define DCR_DRBE0 0x00080000 /* break on load from address in DBAR0/DBMR0x */ - -#define DCR_EIM 0x0c000000 /* external interrupt disable */ -#define DCR_IBM 0x10000000 /* instruction break disable */ -#define DCR_SE 0x20000000 /* single step enable */ -#define DCR_EBE 0x40000000 /* exception break enable */ - -/* - * BRR - Break Interrupt Request Register - */ -#define BRR_ST 0x00000001 /* single-step detected */ -#define BRR_SB 0x00000002 /* break instruction detected */ -#define BRR_BB 0x00000004 /* branch with hint detected */ -#define BRR_CBB 0x00000008 /* branch to LR detected */ -#define BRR_IBx 0x000000f0 /* hardware breakpoint detected */ -#define BRR_DBx 0x00000f00 /* hardware watchpoint detected */ -#define BRR_DBNEx 0x0000f000 /* ? */ -#define BRR_EBTT 0x00ff0000 /* trap type of exception break */ -#define BRR_TB 0x10000000 /* external break request detected */ -#define BRR_CB 0x20000000 /* ICE break command detected */ -#define BRR_EB 0x40000000 /* exception break detected */ - -/* - * BPSR - Break PSR Save Register - */ -#define BPSR_BET 0x00000001 /* former PSR.ET */ -#define BPSR_BS 0x00001000 /* former PSR.S */ - -#endif /* _ASM_SPR_REGS_H */ diff --git a/include/asm-frv/stat.h b/include/asm-frv/stat.h deleted file mode 100644 index ce56de9..0000000 --- a/include/asm-frv/stat.h +++ /dev/null @@ -1,100 +0,0 @@ -#ifndef _ASM_STAT_H -#define _ASM_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -/* This matches struct stat in uClibc/glibc. */ -struct stat { - unsigned char __pad1[6]; - unsigned short st_dev; - - unsigned long __pad2; - unsigned long st_ino; - - unsigned short __pad3; - unsigned short st_mode; - unsigned short __pad4; - unsigned short st_nlink; - - unsigned short __pad5; - unsigned short st_uid; - unsigned short __pad6; - unsigned short st_gid; - - unsigned char __pad7[6]; - unsigned short st_rdev; - - unsigned long __pad8; - unsigned long st_size; - - unsigned long __pad9; /* align 64-bit st_blocks to 2-word */ - unsigned long st_blksize; - - unsigned long __pad10; /* future possible st_blocks high bits */ - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long __unused1; - unsigned long st_atime; - - unsigned long __unused2; - unsigned long st_mtime; - - unsigned long __unused3; - unsigned long st_ctime; - - unsigned long long __unused4; -}; - -/* This matches struct stat64 in uClibc/glibc. The layout is exactly - the same as that of struct stat above, with 64-bit types taking up - space that was formerly used by padding. stat syscalls are still - different from stat64, though, in that the former tests for - overflow. */ -struct stat64 { - unsigned char __pad1[6]; - unsigned short st_dev; - - unsigned long long st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned char __pad2[6]; - unsigned short st_rdev; - - long long st_size; - - unsigned long __pad3; /* align 64-bit st_blocks to 2-word */ - unsigned long st_blksize; - - unsigned long __pad4; /* future possible st_blocks high bits */ - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime_nsec; - unsigned long st_atime; - - unsigned int st_mtime_nsec; - unsigned long st_mtime; - - unsigned long st_ctime_nsec; - unsigned long st_ctime; - - unsigned long long __unused4; -}; - -#endif /* _ASM_STAT_H */ diff --git a/include/asm-frv/statfs.h b/include/asm-frv/statfs.h deleted file mode 100644 index 741f586..0000000 --- a/include/asm-frv/statfs.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_STATFS_H -#define _ASM_STATFS_H - -#include - -#endif /* _ASM_STATFS_H */ - diff --git a/include/asm-frv/string.h b/include/asm-frv/string.h deleted file mode 100644 index 5ed310f..0000000 --- a/include/asm-frv/string.h +++ /dev/null @@ -1,51 +0,0 @@ -/* string.h: FRV string handling - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_STRING_H_ -#define _ASM_STRING_H_ - -#ifdef __KERNEL__ /* only set these up for kernel code */ - -#define __HAVE_ARCH_MEMSET 1 -#define __HAVE_ARCH_MEMCPY 1 - -extern void *memset(void *, int, __kernel_size_t); -extern void *memcpy(void *, const void *, __kernel_size_t); - -#else /* KERNEL */ - -/* - * let user libraries deal with these, - * IMHO the kernel has no place defining these functions for user apps - */ - -#define __HAVE_ARCH_STRCPY 1 -#define __HAVE_ARCH_STRNCPY 1 -#define __HAVE_ARCH_STRCAT 1 -#define __HAVE_ARCH_STRNCAT 1 -#define __HAVE_ARCH_STRCMP 1 -#define __HAVE_ARCH_STRNCMP 1 -#define __HAVE_ARCH_STRNICMP 1 -#define __HAVE_ARCH_STRCHR 1 -#define __HAVE_ARCH_STRRCHR 1 -#define __HAVE_ARCH_STRSTR 1 -#define __HAVE_ARCH_STRLEN 1 -#define __HAVE_ARCH_STRNLEN 1 -#define __HAVE_ARCH_MEMSET 1 -#define __HAVE_ARCH_MEMCPY 1 -#define __HAVE_ARCH_MEMMOVE 1 -#define __HAVE_ARCH_MEMSCAN 1 -#define __HAVE_ARCH_MEMCMP 1 -#define __HAVE_ARCH_MEMCHR 1 -#define __HAVE_ARCH_STRTOK 1 - -#endif /* KERNEL */ -#endif /* _ASM_STRING_H_ */ diff --git a/include/asm-frv/suspend.h b/include/asm-frv/suspend.h deleted file mode 100644 index 5fa7b5a..0000000 --- a/include/asm-frv/suspend.h +++ /dev/null @@ -1,20 +0,0 @@ -/* suspend.h: suspension stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SUSPEND_H -#define _ASM_SUSPEND_H - -static inline int arch_prepare_suspend(void) -{ - return 0; -} - -#endif /* _ASM_SUSPEND_H */ diff --git a/include/asm-frv/swab.h b/include/asm-frv/swab.h deleted file mode 100644 index f305834..0000000 --- a/include/asm-frv/swab.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_SWAB_H -#define _ASM_SWAB_H - -#include - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#endif /* _ASM_SWAB_H */ diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h deleted file mode 100644 index 7742ec0..0000000 --- a/include/asm-frv/system.h +++ /dev/null @@ -1,301 +0,0 @@ -/* system.h: FR-V CPU control definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SYSTEM_H -#define _ASM_SYSTEM_H - -#include -#include -#include - -struct thread_struct; - -/* - * switch_to(prev, next) should switch from task `prev' to `next' - * `prev' will never be the same as `next'. - * The `mb' is to tell GCC not to cache `current' across this call. - */ -extern asmlinkage -struct task_struct *__switch_to(struct thread_struct *prev_thread, - struct thread_struct *next_thread, - struct task_struct *prev); - -#define switch_to(prev, next, last) \ -do { \ - (prev)->thread.sched_lr = \ - (unsigned long) __builtin_return_address(0); \ - (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ - mb(); \ -} while(0) - -/* - * interrupt flag manipulation - * - use virtual interrupt management since touching the PSR is slow - * - ICC2.Z: T if interrupts virtually disabled - * - ICC2.C: F if interrupts really disabled - * - if Z==1 upon interrupt: - * - C is set to 0 - * - interrupts are really disabled - * - entry.S returns immediately - * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts - * - if taken, the trap: - * - sets ICC2.C - * - enables interrupts - */ -#define local_irq_disable() \ -do { \ - /* set Z flag, but don't change the C flag */ \ - asm volatile(" andcc gr0,gr0,gr0,icc2 \n" \ - : \ - : \ - : "memory", "icc2" \ - ); \ -} while(0) - -#define local_irq_enable() \ -do { \ - /* clear Z flag and then test the C flag */ \ - asm volatile(" oricc gr0,#1,gr0,icc2 \n" \ - " tihi icc2,gr0,#2 \n" \ - : \ - : \ - : "memory", "icc2" \ - ); \ -} while(0) - -#define local_save_flags(flags) \ -do { \ - typecheck(unsigned long, flags); \ - asm volatile("movsg ccr,%0" \ - : "=r"(flags) \ - : \ - : "memory"); \ - \ - /* shift ICC2.Z to bit 0 */ \ - flags >>= 26; \ - \ - /* make flags 1 if interrupts disabled, 0 otherwise */ \ - flags &= 1UL; \ -} while(0) - -#define irqs_disabled() \ - ({unsigned long flags; local_save_flags(flags); !!flags; }) - -#define local_irq_save(flags) \ -do { \ - typecheck(unsigned long, flags); \ - local_save_flags(flags); \ - local_irq_disable(); \ -} while(0) - -#define local_irq_restore(flags) \ -do { \ - typecheck(unsigned long, flags); \ - \ - /* load the Z flag by turning 1 if disabled into 0 if disabled \ - * and thus setting the Z flag but not the C flag */ \ - asm volatile(" xoricc %0,#1,gr0,icc2 \n" \ - /* then test Z=0 and C=0 */ \ - " tihi icc2,gr0,#2 \n" \ - : \ - : "r"(flags) \ - : "memory", "icc2" \ - ); \ - \ -} while(0) - -/* - * real interrupt flag manipulation - */ -#define __local_irq_disable() \ -do { \ - unsigned long psr; \ - asm volatile(" movsg psr,%0 \n" \ - " andi %0,%2,%0 \n" \ - " ori %0,%1,%0 \n" \ - " movgs %0,psr \n" \ - : "=r"(psr) \ - : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ - : "memory"); \ -} while(0) - -#define __local_irq_enable() \ -do { \ - unsigned long psr; \ - asm volatile(" movsg psr,%0 \n" \ - " andi %0,%1,%0 \n" \ - " movgs %0,psr \n" \ - : "=r"(psr) \ - : "i" (~PSR_PIL) \ - : "memory"); \ -} while(0) - -#define __local_save_flags(flags) \ -do { \ - typecheck(unsigned long, flags); \ - asm("movsg psr,%0" \ - : "=r"(flags) \ - : \ - : "memory"); \ -} while(0) - -#define __local_irq_save(flags) \ -do { \ - unsigned long npsr; \ - typecheck(unsigned long, flags); \ - asm volatile(" movsg psr,%0 \n" \ - " andi %0,%3,%1 \n" \ - " ori %1,%2,%1 \n" \ - " movgs %1,psr \n" \ - : "=r"(flags), "=r"(npsr) \ - : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ - : "memory"); \ -} while(0) - -#define __local_irq_restore(flags) \ -do { \ - typecheck(unsigned long, flags); \ - asm volatile(" movgs %0,psr \n" \ - : \ - : "r" (flags) \ - : "memory"); \ -} while(0) - -#define __irqs_disabled() \ - ((__get_PSR() & PSR_PIL) >= PSR_PIL_14) - -/* - * Force strict CPU ordering. - */ -#define nop() asm volatile ("nop"::) -#define mb() asm volatile ("membar" : : :"memory") -#define rmb() asm volatile ("membar" : : :"memory") -#define wmb() asm volatile ("membar" : : :"memory") -#define read_barrier_depends() do { } while (0) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#define set_mb(var, value) \ - do { xchg(&var, (value)); } while (0) -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do {} while(0) -#define set_mb(var, value) \ - do { var = (value); barrier(); } while (0) -#endif - -extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2))); -extern void free_initmem(void); - -#define arch_align_stack(x) (x) - -/*****************************************************************************/ -/* - * compare and conditionally exchange value with memory - * - if (*ptr == test) then orig = *ptr; *ptr = test; - * - if (*ptr != test) then orig = *ptr; - */ -#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS - -#define cmpxchg(ptr, test, new) \ -({ \ - __typeof__(ptr) __xg_ptr = (ptr); \ - __typeof__(*(ptr)) __xg_orig, __xg_tmp; \ - __typeof__(*(ptr)) __xg_test = (test); \ - __typeof__(*(ptr)) __xg_new = (new); \ - \ - switch (sizeof(__xg_orig)) { \ - case 4: \ - asm volatile( \ - "0: \n" \ - " orcc gr0,gr0,gr0,icc3 \n" \ - " ckeq icc3,cc7 \n" \ - " ld.p %M0,%1 \n" \ - " orcr cc7,cc7,cc3 \n" \ - " sub%I4cc %1,%4,%2,icc0 \n" \ - " bne icc0,#0,1f \n" \ - " cst.p %3,%M0 ,cc3,#1 \n" \ - " corcc gr29,gr29,gr0 ,cc3,#1 \n" \ - " beq icc3,#0,0b \n" \ - "1: \n" \ - : "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp) \ - : "r"(__xg_new), "NPr"(__xg_test) \ - : "memory", "cc7", "cc3", "icc3", "icc0" \ - ); \ - break; \ - \ - default: \ - __xg_orig = (__typeof__(__xg_orig))0; \ - asm volatile("break"); \ - break; \ - } \ - \ - __xg_orig; \ -}) - -#else - -extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new); - -#define cmpxchg(ptr, test, new) \ -({ \ - __typeof__(ptr) __xg_ptr = (ptr); \ - __typeof__(*(ptr)) __xg_orig; \ - __typeof__(*(ptr)) __xg_test = (test); \ - __typeof__(*(ptr)) __xg_new = (new); \ - \ - switch (sizeof(__xg_orig)) { \ - case 4: __xg_orig = (__force __typeof__(*ptr)) \ - __cmpxchg_32((__force uint32_t *)__xg_ptr, \ - (__force uint32_t)__xg_test, \ - (__force uint32_t)__xg_new); break; \ - default: \ - __xg_orig = (__typeof__(__xg_orig))0; \ - asm volatile("break"); \ - break; \ - } \ - \ - __xg_orig; \ -}) - -#endif - -#include - -static inline unsigned long __cmpxchg_local(volatile void *ptr, - unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 4: - return cmpxchg((unsigned long *)ptr, old, new); - default: - return __cmpxchg_local_generic(ptr, old, new, size); - } - - return old; -} - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#endif /* _ASM_SYSTEM_H */ diff --git a/include/asm-frv/termbits.h b/include/asm-frv/termbits.h deleted file mode 100644 index 5568492..0000000 --- a/include/asm-frv/termbits.h +++ /dev/null @@ -1,202 +0,0 @@ -#ifndef _ASM_TERMBITS_H__ -#define _ASM_TERMBITS_H__ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* Input baud rate */ -#define CTVB 004000000000 /* VisioBraille Terminal flow control */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_TERMBITS_H__ */ - diff --git a/include/asm-frv/termios.h b/include/asm-frv/termios.h deleted file mode 100644 index a62fb58..0000000 --- a/include/asm-frv/termios.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _ASM_TERMIOS_H -#define _ASM_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */ - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ -#include -#endif - -#endif /* _ASM_TERMIOS_H */ diff --git a/include/asm-frv/thread_info.h b/include/asm-frv/thread_info.h deleted file mode 100644 index bb53ab7..0000000 --- a/include/asm-frv/thread_info.h +++ /dev/null @@ -1,144 +0,0 @@ -/* thread_info.h: description - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * Derived from include/asm-i386/thread_info.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#include -#endif - -#define THREAD_SIZE 8192 - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants must also be changed - */ -#ifndef __ASSEMBLY__ - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - - mm_segment_t addr_limit; /* thread address space: - * 0-0xBFFFFFFF for user-thead - * 0-0xFFFFFFFF for kernel-thread - */ - struct restart_block restart_block; - - __u8 supervisor_stack[0]; -}; - -#else /* !__ASSEMBLY__ */ - -#include - -#endif - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* how to get the thread information struct from C */ -register struct thread_info *__current_thread_info asm("gr15"); - -#define current_thread_info() ({ __current_thread_info; }) - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) \ - ({ \ - struct thread_info *ret; \ - \ - ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ - \ - ret; \ - }) -#else -#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) -#endif - -#define free_thread_info(info) kfree(info) - -#endif /* __ASSEMBLY__ */ - -/* - * thread information flags - * - these are process state flags that various assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */ -#define TIF_IRET 4 /* return with iret */ -#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ -#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 /* OOM killer killed process */ -#define TIF_FREEZE 18 /* freezing for suspend */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) -#define _TIF_FREEZE (1 << TIF_FREEZE) - -#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ -#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPM 0x0001 /* FPU/Media was used by this task this quantum (SMP) */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-frv/timer-regs.h b/include/asm-frv/timer-regs.h deleted file mode 100644 index 6c5a871..0000000 --- a/include/asm-frv/timer-regs.h +++ /dev/null @@ -1,106 +0,0 @@ -/* timer-regs.h: hardware timer register definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_TIMER_REGS_H -#define _ASM_TIMER_REGS_H - -#include - -extern unsigned long __nongprelbss __clkin_clock_speed_HZ; -extern unsigned long __nongprelbss __ext_bus_clock_speed_HZ; -extern unsigned long __nongprelbss __res_bus_clock_speed_HZ; -extern unsigned long __nongprelbss __sdram_clock_speed_HZ; -extern unsigned long __nongprelbss __core_bus_clock_speed_HZ; -extern unsigned long __nongprelbss __core_clock_speed_HZ; -extern unsigned long __nongprelbss __dsu_clock_speed_HZ; -extern unsigned long __nongprelbss __serial_clock_speed_HZ; - -#define __get_CLKC() ({ *(volatile unsigned long *)(0xfeff9a00); }) - -static inline void __set_CLKC(unsigned long v) -{ - int tmp; - - asm volatile(" st%I0.p %2,%M0 \n" - " setlos %3,%1 \n" - " membar \n" - "0: \n" - " subicc %1,#1,%1,icc0 \n" - " bnc icc0,#1,0b \n" - : "=m"(*(volatile unsigned long *) 0xfeff9a00), "=r"(tmp) - : "r"(v), "i"(256) - : "icc0"); -} - -#define __get_TCTR() ({ *(volatile unsigned long *)(0xfeff9418); }) -#define __get_TPRV() ({ *(volatile unsigned long *)(0xfeff9420); }) -#define __get_TPRCKSL() ({ *(volatile unsigned long *)(0xfeff9428); }) -#define __get_TCSR(T) ({ *(volatile unsigned long *)(0xfeff9400 + 8 * (T)); }) -#define __get_TxCKSL(T) ({ *(volatile unsigned long *)(0xfeff9430 + 8 * (T)); }) - -#define __get_TCSR_DATA(T) ({ __get_TCSR(T) >> 24; }) - -#define __set_TCTR(V) do { *(volatile unsigned long *)(0xfeff9418) = (V); mb(); } while(0) -#define __set_TPRV(V) do { *(volatile unsigned long *)(0xfeff9420) = (V) << 24; mb(); } while(0) -#define __set_TPRCKSL(V) do { *(volatile unsigned long *)(0xfeff9428) = (V); mb(); } while(0) -#define __set_TCSR(T,V) \ -do { *(volatile unsigned long *)(0xfeff9400 + 8 * (T)) = (V); mb(); } while(0) - -#define __set_TxCKSL(T,V) \ -do { *(volatile unsigned long *)(0xfeff9430 + 8 * (T)) = (V); mb(); } while(0) - -#define __set_TCSR_DATA(T,V) __set_TCSR(T, (V) << 24) -#define __set_TxCKSL_DATA(T,V) __set_TxCKSL(T, TxCKSL_EIGHT | __TxCKSL_SELECT((V))) - -/* clock control register */ -#define CLKC_CMODE 0x0f000000 -#define CLKC_SLPL 0x000f0000 -#define CLKC_P0 0x00000100 -#define CLKC_CM 0x00000003 - -#define CLKC_CMODE_s 24 - -/* timer control register - non-readback mode */ -#define TCTR_MODE_0 0x00000000 -#define TCTR_MODE_2 0x04000000 -#define TCTR_MODE_4 0x08000000 -#define TCTR_MODE_5 0x0a000000 -#define TCTR_RL_LATCH 0x00000000 -#define TCTR_RL_RW_LOW8 0x10000000 -#define TCTR_RL_RW_HIGH8 0x20000000 -#define TCTR_RL_RW_LH8 0x30000000 -#define TCTR_SC_CTR0 0x00000000 -#define TCTR_SC_CTR1 0x40000000 -#define TCTR_SC_CTR2 0x80000000 - -/* timer control register - readback mode */ -#define TCTR_CNT0 0x02000000 -#define TCTR_CNT1 0x04000000 -#define TCTR_CNT2 0x08000000 -#define TCTR_NSTATUS 0x10000000 -#define TCTR_NCOUNT 0x20000000 -#define TCTR_SC_READBACK 0xc0000000 - -/* timer control status registers - non-readback mode */ -#define TCSRx_DATA 0xff000000 - -/* timer control status registers - readback mode */ -#define TCSRx_OUTPUT 0x80000000 -#define TCSRx_NULLCOUNT 0x40000000 -#define TCSRx_RL 0x30000000 -#define TCSRx_MODE 0x07000000 - -/* timer clock select registers */ -#define TxCKSL_SELECT 0x0f000000 -#define __TxCKSL_SELECT(X) ((X) << 24) -#define TxCKSL_EIGHT 0xf0000000 - -#endif /* _ASM_TIMER_REGS_H */ diff --git a/include/asm-frv/timex.h b/include/asm-frv/timex.h deleted file mode 100644 index a89bdde..0000000 --- a/include/asm-frv/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* timex.h: FR-V architecture timex specifications - */ -#ifndef _ASM_TIMEX_H -#define _ASM_TIMEX_H - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ -#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */ - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#define vxtime_lock() do {} while (0) -#define vxtime_unlock() do {} while (0) - -#endif - diff --git a/include/asm-frv/tlb.h b/include/asm-frv/tlb.h deleted file mode 100644 index cd458eb..0000000 --- a/include/asm-frv/tlb.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _ASM_TLB_H -#define _ASM_TLB_H - -#include - -#ifdef CONFIG_MMU -extern void check_pgt_cache(void); -#else -#define check_pgt_cache() do {} while(0) -#endif - -/* - * we don't need any special per-pte or per-vma handling... - */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - -/* - * .. because we flush the whole mm when it fills up - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include - -#endif /* _ASM_TLB_H */ - diff --git a/include/asm-frv/tlbflush.h b/include/asm-frv/tlbflush.h deleted file mode 100644 index 7ac5eaf..0000000 --- a/include/asm-frv/tlbflush.h +++ /dev/null @@ -1,73 +0,0 @@ -/* tlbflush.h: TLB flushing functions - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_TLBFLUSH_H -#define _ASM_TLBFLUSH_H - -#include -#include - -#ifdef CONFIG_MMU - -#ifndef __ASSEMBLY__ -extern void asmlinkage __flush_tlb_all(void); -extern void asmlinkage __flush_tlb_mm(unsigned long contextid); -extern void asmlinkage __flush_tlb_page(unsigned long contextid, unsigned long start); -extern void asmlinkage __flush_tlb_range(unsigned long contextid, - unsigned long start, unsigned long end); -#endif /* !__ASSEMBLY__ */ - -#define flush_tlb_all() \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while(0) - -#define flush_tlb_mm(mm) \ -do { \ - preempt_disable(); \ - __flush_tlb_mm((mm)->context.id); \ - preempt_enable(); \ -} while(0) - -#define flush_tlb_range(vma,start,end) \ -do { \ - preempt_disable(); \ - __flush_tlb_range((vma)->vm_mm->context.id, start, end); \ - preempt_enable(); \ -} while(0) - -#define flush_tlb_page(vma,addr) \ -do { \ - preempt_disable(); \ - __flush_tlb_page((vma)->vm_mm->context.id, addr); \ - preempt_enable(); \ -} while(0) - - -#define __flush_tlb_global() flush_tlb_all() -#define flush_tlb() flush_tlb_all() -#define flush_tlb_kernel_range(start, end) flush_tlb_all() - -#else - -#define flush_tlb() BUG() -#define flush_tlb_all() BUG() -#define flush_tlb_mm(mm) BUG() -#define flush_tlb_page(vma,addr) BUG() -#define flush_tlb_range(mm,start,end) BUG() -#define flush_tlb_kernel_range(start, end) BUG() - -#endif - - -#endif /* _ASM_TLBFLUSH_H */ diff --git a/include/asm-frv/topology.h b/include/asm-frv/topology.h deleted file mode 100644 index 9427243..0000000 --- a/include/asm-frv/topology.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_TOPOLOGY_H -#define _ASM_TOPOLOGY_H - -#ifdef CONFIG_NUMA - -#error NUMA not supported yet - -#endif /* CONFIG_NUMA */ - -#include - -#endif /* _ASM_TOPOLOGY_H */ diff --git a/include/asm-frv/types.h b/include/asm-frv/types.h deleted file mode 100644 index 613bf1e..0000000 --- a/include/asm-frv/types.h +++ /dev/null @@ -1,40 +0,0 @@ -/* types.h: FRV types - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_TYPES_H -#define _ASM_TYPES_H - -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TYPES_H */ diff --git a/include/asm-frv/uaccess.h b/include/asm-frv/uaccess.h deleted file mode 100644 index 53650c9..0000000 --- a/include/asm-frv/uaccess.h +++ /dev/null @@ -1,321 +0,0 @@ -/* uaccess.h: userspace accessor functions - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_UACCESS_H -#define _ASM_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include -#include -#include - -#define HAVE_ARCH_UNMAPPED_AREA /* we decide where to put mmaps */ - -#define __ptr(x) ((unsigned long __force *)(x)) - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit()) - -/* - * check that a range of addresses falls within the current address limit - */ -static inline int ___range_ok(unsigned long addr, unsigned long size) -{ -#ifdef CONFIG_MMU - int flag = -EFAULT, tmp; - - asm volatile ( - " addcc %3,%2,%1,icc0 \n" /* set C-flag if addr+size>4GB */ - " subcc.p %1,%4,gr0,icc1 \n" /* jump if addr+size>limit */ - " bc icc0,#0,0f \n" - " bhi icc1,#0,0f \n" - " setlos #0,%0 \n" /* mark okay */ - "0: \n" - : "=r"(flag), "=&r"(tmp) - : "r"(addr), "r"(size), "r"(get_addr_limit()), "0"(flag) - ); - - return flag; - -#else - - if (addr < memory_start || - addr > memory_end || - size > memory_end - memory_start || - addr + size > memory_end) - return -EFAULT; - - return 0; -#endif -} - -#define __range_ok(addr,size) ___range_ok((unsigned long) (addr), (unsigned long) (size)) - -#define access_ok(type,addr,size) (__range_ok((void __user *)(addr), (size)) == 0) -#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ -#define __put_user(x, ptr) \ -({ \ - int __pu_err = 0; \ - \ - typeof(*(ptr)) __pu_val = (x); \ - __chk_user_ptr(ptr); \ - \ - switch (sizeof (*(ptr))) { \ - case 1: \ - __put_user_asm(__pu_err, __pu_val, ptr, "b", "r"); \ - break; \ - case 2: \ - __put_user_asm(__pu_err, __pu_val, ptr, "h", "r"); \ - break; \ - case 4: \ - __put_user_asm(__pu_err, __pu_val, ptr, "", "r"); \ - break; \ - case 8: \ - __put_user_asm(__pu_err, __pu_val, ptr, "d", "e"); \ - break; \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) - -#define put_user(x, ptr) \ -({ \ - typeof(*(ptr)) __user *_p = (ptr); \ - int _e; \ - \ - _e = __range_ok(_p, sizeof(*_p)); \ - if (_e == 0) \ - _e = __put_user((x), _p); \ - _e; \ -}) - -extern int __put_user_bad(void); - -/* - * Tell gcc we read from memory instead of writing: this is because - * we do not write to any memory gcc knows about, so there are no - * aliasing issues. - */ - -#ifdef CONFIG_MMU - -#define __put_user_asm(err,x,ptr,dsize,constraint) \ -do { \ - asm volatile("1: st"dsize"%I1 %2,%M1 \n" \ - "2: \n" \ - ".subsection 2 \n" \ - "3: setlos %3,%0 \n" \ - " bra 2b \n" \ - ".previous \n" \ - ".section __ex_table,\"a\" \n" \ - " .balign 8 \n" \ - " .long 1b,3b \n" \ - ".previous" \ - : "=r" (err) \ - : "m" (*__ptr(ptr)), constraint (x), "i"(-EFAULT), "0"(err) \ - : "memory"); \ -} while (0) - -#else - -#define __put_user_asm(err,x,ptr,bwl,con) \ -do { \ - asm(" st"bwl"%I0 %1,%M0 \n" \ - " membar \n" \ - : \ - : "m" (*__ptr(ptr)), con (x) \ - : "memory"); \ -} while (0) - -#endif - -/*****************************************************************************/ -/* - * - */ -#define __get_user(x, ptr) \ -({ \ - int __gu_err = 0; \ - __chk_user_ptr(ptr); \ - \ - switch (sizeof(*(ptr))) { \ - case 1: { \ - unsigned char __gu_val; \ - __get_user_asm(__gu_err, __gu_val, ptr, "ub", "=r"); \ - (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ - break; \ - } \ - case 2: { \ - unsigned short __gu_val; \ - __get_user_asm(__gu_err, __gu_val, ptr, "uh", "=r"); \ - (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ - break; \ - } \ - case 4: { \ - unsigned int __gu_val; \ - __get_user_asm(__gu_err, __gu_val, ptr, "", "=r"); \ - (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ - break; \ - } \ - case 8: { \ - unsigned long long __gu_val; \ - __get_user_asm(__gu_err, __gu_val, ptr, "d", "=e"); \ - (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ - break; \ - } \ - default: \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - __gu_err; \ -}) - -#define get_user(x, ptr) \ -({ \ - const typeof(*(ptr)) __user *_p = (ptr);\ - int _e; \ - \ - _e = __range_ok(_p, sizeof(*_p)); \ - if (likely(_e == 0)) \ - _e = __get_user((x), _p); \ - else \ - (x) = (typeof(x)) 0; \ - _e; \ -}) - -extern int __get_user_bad(void); - -#ifdef CONFIG_MMU - -#define __get_user_asm(err,x,ptr,dtype,constraint) \ -do { \ - asm("1: ld"dtype"%I2 %M2,%1 \n" \ - "2: \n" \ - ".subsection 2 \n" \ - "3: setlos %3,%0 \n" \ - " setlos #0,%1 \n" \ - " bra 2b \n" \ - ".previous \n" \ - ".section __ex_table,\"a\" \n" \ - " .balign 8 \n" \ - " .long 1b,3b \n" \ - ".previous" \ - : "=r" (err), constraint (x) \ - : "m" (*__ptr(ptr)), "i"(-EFAULT), "0"(err) \ - ); \ -} while(0) - -#else - -#define __get_user_asm(err,x,ptr,bwl,con) \ - asm(" ld"bwl"%I1 %M1,%0 \n" \ - " membar \n" \ - : con(x) \ - : "m" (*__ptr(ptr))) - -#endif - -/*****************************************************************************/ -/* - * - */ -#define ____force(x) (__force void *)(void __user *)(x) -#ifdef CONFIG_MMU -extern long __memset_user(void *dst, unsigned long count); -extern long __memcpy_user(void *dst, const void *src, unsigned long count); - -#define clear_user(dst,count) __memset_user(____force(dst), (count)) -#define __copy_from_user_inatomic(to, from, n) __memcpy_user((to), ____force(from), (n)) -#define __copy_to_user_inatomic(to, from, n) __memcpy_user(____force(to), (from), (n)) - -#else - -#define clear_user(dst,count) (memset(____force(dst), 0, (count)), 0) -#define __copy_from_user_inatomic(to, from, n) (memcpy((to), ____force(from), (n)), 0) -#define __copy_to_user_inatomic(to, from, n) (memcpy(____force(to), (from), (n)), 0) - -#endif - -#define __clear_user clear_user - -static inline unsigned long __must_check -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - might_sleep(); - return __copy_to_user_inatomic(to, from, n); -} - -static inline unsigned long -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - might_sleep(); - return __copy_from_user_inatomic(to, from, n); -} - -static inline long copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long ret = n; - - if (likely(__access_ok(from, n))) - ret = __copy_from_user(to, from, n); - - if (unlikely(ret != 0)) - memset(to + (n - ret), 0, ret); - - return ret; -} - -static inline long copy_to_user(void __user *to, const void *from, unsigned long n) -{ - return likely(__access_ok(to, n)) ? __copy_to_user(to, from, n) : n; -} - -extern long strncpy_from_user(char *dst, const char __user *src, long count); -extern long strnlen_user(const char __user *src, long count); - -#define strlen_user(str) strnlen_user(str, 32767) - -extern unsigned long search_exception_table(unsigned long addr); - -#endif /* _ASM_UACCESS_H */ diff --git a/include/asm-frv/ucontext.h b/include/asm-frv/ucontext.h deleted file mode 100644 index 8d8c0c9..0000000 --- a/include/asm-frv/ucontext.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_UCONTEXT_H -#define _ASM_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif diff --git a/include/asm-frv/unaligned.h b/include/asm-frv/unaligned.h deleted file mode 100644 index 6c61c05..0000000 --- a/include/asm-frv/unaligned.h +++ /dev/null @@ -1,22 +0,0 @@ -/* unaligned.h: unaligned access handler - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_UNALIGNED_H -#define _ASM_UNALIGNED_H - -#include -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif /* _ASM_UNALIGNED_H */ diff --git a/include/asm-frv/unistd.h b/include/asm-frv/unistd.h deleted file mode 100644 index edcfaf5..0000000 --- a/include/asm-frv/unistd.h +++ /dev/null @@ -1,382 +0,0 @@ -#ifndef _ASM_UNISTD_H_ -#define _ASM_UNISTD_H_ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -// #define __NR_oldolduname /* 59 */ obsolete -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -// #define __NR_mmap 90 /* obsolete - not implemented */ -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -// #define __NR_profil /* 98 */ obsolete -#define __NR_statfs 99 -#define __NR_fstatfs 100 -// #define __NR_ioperm /* 101 */ not supported -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -// #define __NR_olduname /* 109 */ obsolete -// #define __NR_iopl /* 110 */ not supported -#define __NR_vhangup 111 -// #define __NR_idle /* 112 */ Obsolete -// #define __NR_vm86old /* 113 */ not supported -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -// #define __NR_modify_ldt /* 123 */ not supported -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -// #define __NR_vm86 /* 166 */ not supported -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 - -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -#define __NR_security 223 /* syscall for security modules */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -/* #define __NR_sys_setaltroot 285 */ -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_ioprio_set 289 -#define __NR_ioprio_get 290 -#define __NR_inotify_init 291 -#define __NR_inotify_add_watch 292 -#define __NR_inotify_rm_watch 293 -#define __NR_migrate_pages 294 -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 -#define __NR_set_robust_list 311 -#define __NR_get_robust_list 312 -#define __NR_splice 313 -#define __NR_sync_file_range 314 -#define __NR_tee 315 -#define __NR_vmsplice 316 -#define __NR_move_pages 317 -#define __NR_getcpu 318 -#define __NR_epoll_pwait 319 -#define __NR_utimensat 320 -#define __NR_signalfd 321 -#define __NR_timerfd_create 322 -#define __NR_eventfd 323 -#define __NR_fallocate 324 -#define __NR_timerfd_settime 325 -#define __NR_timerfd_gettime 326 -#define __NR_signalfd4 327 -#define __NR_eventfd2 328 -#define __NR_epoll_create1 329 -#define __NR_dup3 330 -#define __NR_pipe2 331 -#define __NR_inotify_init1 332 - -#ifdef __KERNEL__ - -#define NR_syscalls 333 - -#define __ARCH_WANT_IPC_PARSE_VERSION -/* #define __ARCH_WANT_OLD_READDIR */ -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -/* #define __ARCH_WANT_SYS_GETHOSTNAME */ -#define __ARCH_WANT_SYS_PAUSE -/* #define __ARCH_WANT_SYS_SGETMASK */ -/* #define __ARCH_WANT_SYS_SIGNAL */ -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */ -#define __ARCH_WANT_SYS_OLDUMOUNT -/* #define __ARCH_WANT_SYS_SIGPENDING */ -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_UNISTD_H_ */ diff --git a/include/asm-frv/user.h b/include/asm-frv/user.h deleted file mode 100644 index 82fa8fa..0000000 --- a/include/asm-frv/user.h +++ /dev/null @@ -1,80 +0,0 @@ -/* user.h: FR-V core file format stuff - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_USER_H -#define _ASM_USER_H - -#include -#include - -/* Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the 'trad-core' bfd). There are quite a number of - * obstacles to being able to view the contents of the floating point - * registers, and until these are solved you will not be able to view - * the contents of them. Actually, you can read in the core file and - * look at the contents of the user struct to find out what the - * floating point registers contain. - * - * The actual file contents are as follows: - * UPAGE: - * 1 page consisting of a user struct that tells gdb what is present - * in the file. Directly after this is a copy of the task_struct, - * which is currently not used by gdb, but it may come in useful at - * some point. All of the registers are stored as part of the - * upage. The upage should always be only one page. - * - * DATA: - * The data area is stored. We use current->end_text to - * current->brk to pick up all of the user variables, plus any - * memory that may have been malloced. No attempt is made to - * determine if a page is demand-zero or if a page is totally - * unused, we just cover the entire range. All of the addresses are - * rounded in such a way that an integral number of pages is - * written. - * - * STACK: - * We need the stack information in order to get a meaningful - * backtrace. We need to write the data from (esp) to - * current->start_stack, so we round each of these off in order to - * be able to write an integer number of pages. The minimum core - * file size is 3 pages, or 12288 bytes. - */ - -/* When the kernel dumps core, it starts by dumping the user struct - - * this will be used by gdb to figure out where the data and stack segments - * are within the file, and what virtual addresses to use. - */ -struct user { - /* We start with the registers, to mimic the way that "memory" is returned - * from the ptrace(3,...) function. */ - struct user_context regs; - - /* The rest of this junk is to help gdb figure out what goes where */ - unsigned long u_tsize; /* Text segment size (pages). */ - unsigned long u_dsize; /* Data segment size (pages). */ - unsigned long u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - * This is actually the bottom of the stack, - * the top of the stack is always found in the - * esp register. */ - long int signal; /* Signal that caused the core dump. */ - - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif diff --git a/include/asm-frv/vga.h b/include/asm-frv/vga.h deleted file mode 100644 index a702c80..0000000 --- a/include/asm-frv/vga.h +++ /dev/null @@ -1,17 +0,0 @@ -/* vga.h: VGA register stuff - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_VGA_H -#define _ASM_VGA_H - - - -#endif /* _ASM_VGA_H */ diff --git a/include/asm-frv/virtconvert.h b/include/asm-frv/virtconvert.h deleted file mode 100644 index 59788fa..0000000 --- a/include/asm-frv/virtconvert.h +++ /dev/null @@ -1,41 +0,0 @@ -/* virtconvert.h: virtual/physical/page address convertion - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_VIRTCONVERT_H -#define _ASM_VIRTCONVERT_H - -/* - * Macros used for converting between virtual and physical mappings. - */ - -#ifdef __KERNEL__ - -#include - -#ifdef CONFIG_MMU - -#define phys_to_virt(vaddr) ((void *) ((unsigned long)(vaddr) + PAGE_OFFSET)) -#define virt_to_phys(vaddr) ((unsigned long) (vaddr) - PAGE_OFFSET) - -#else - -#define phys_to_virt(vaddr) ((void *) (vaddr)) -#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) - -#endif - -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT)) -#define page_to_phys(page) virt_to_phys((void *)__page_address(page)) - -#endif -#endif diff --git a/include/asm-frv/xor.h b/include/asm-frv/xor.h deleted file mode 100644 index c82eb12..0000000 --- a/include/asm-frv/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v0.10.2 From fa00e046b41663cbda9b1affc0594669e5f14219 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 10 Apr 2009 12:20:45 +0200 Subject: [ALSA] hda_intel: fix unexpected ring buffer positions I found two issues with ICH7-M (it should be related to other HDA chipsets as well): - the ring buffer position is not reset when stream restarts (after xrun) - solved by moving azx_stream_reset() call from open() to prepare() callback and reset posbuf to zero (it might be filled with hw later than position() callback is called) - irq_ignore flag should be set also when ring buffer memory area is not changed in prepare() callback - this patch replaces irq_ignore with more universal check based on jiffies clock Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 30829ee..6d3b927 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -312,6 +312,9 @@ struct azx_dev { unsigned int period_bytes; /* size of the period in bytes */ unsigned int frags; /* number for period in the play buffer */ unsigned int fifo_size; /* FIFO size */ + unsigned int start_flag: 1; /* stream full start flag */ + unsigned long start_jiffies; /* start + minimum jiffies */ + unsigned long min_jiffies; /* minimum jiffies before position is valid */ void __iomem *sd_addr; /* stream descriptor pointer */ @@ -330,7 +333,6 @@ struct azx_dev { unsigned int opened :1; unsigned int running :1; unsigned int irq_pending :1; - unsigned int irq_ignore :1; /* * For VIA: * A flag to ensure DMA position is 0 @@ -975,7 +977,7 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id) struct azx *chip = dev_id; struct azx_dev *azx_dev; u32 status; - int i; + int i, ok; spin_lock(&chip->reg_lock); @@ -991,18 +993,14 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id) azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); if (!azx_dev->substream || !azx_dev->running) continue; - /* ignore the first dummy IRQ (due to pos_adj) */ - if (azx_dev->irq_ignore) { - azx_dev->irq_ignore = 0; - continue; - } /* check whether this IRQ is really acceptable */ - if (azx_position_ok(chip, azx_dev)) { + ok = azx_position_ok(chip, azx_dev); + if (ok == 1) { azx_dev->irq_pending = 0; spin_unlock(&chip->reg_lock); snd_pcm_period_elapsed(azx_dev->substream); spin_lock(&chip->reg_lock); - } else if (chip->bus && chip->bus->workq) { + } else if (ok == 0 && chip->bus && chip->bus->workq) { /* bogus IRQ, process it later */ azx_dev->irq_pending = 1; queue_work(chip->bus->workq, @@ -1088,7 +1086,6 @@ static int azx_setup_periods(struct azx *chip, bdl = (u32 *)azx_dev->bdl.area; ofs = 0; azx_dev->frags = 0; - azx_dev->irq_ignore = 0; pos_adj = bdl_pos_adj[chip->dev_index]; if (pos_adj > 0) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -1109,7 +1106,6 @@ static int azx_setup_periods(struct azx *chip, &bdl, ofs, pos_adj, 1); if (ofs < 0) goto error; - azx_dev->irq_ignore = 1; } } else pos_adj = 0; @@ -1155,6 +1151,9 @@ static void azx_stream_reset(struct azx *chip, struct azx_dev *azx_dev) while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) && --timeout) ; + + /* reset first position - may not be synced with hw at this time */ + *azx_dev->posbuf = 0; } /* @@ -1409,7 +1408,6 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) snd_pcm_set_sync(substream); mutex_unlock(&chip->open_mutex); - azx_stream_reset(chip, azx_dev); return 0; } @@ -1474,6 +1472,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream) unsigned int bufsize, period_bytes, format_val; int err; + azx_stream_reset(chip, azx_dev); format_val = snd_hda_calc_stream_format(runtime->rate, runtime->channels, runtime->format, @@ -1502,6 +1501,8 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream) return err; } + azx_dev->min_jiffies = (runtime->period_size * HZ) / + (runtime->rate * 2); azx_setup_controller(chip, azx_dev); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1; @@ -1518,13 +1519,14 @@ static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) struct azx *chip = apcm->chip; struct azx_dev *azx_dev; struct snd_pcm_substream *s; - int start, nsync = 0, sbits = 0; + int rstart = 0, start, nsync = 0, sbits = 0; int nwait, timeout; switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + rstart = 1; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_START: start = 1; break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: @@ -1554,6 +1556,10 @@ static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) if (s->pcm->card != substream->pcm->card) continue; azx_dev = get_azx_dev(s); + if (rstart) { + azx_dev->start_flag = 1; + azx_dev->start_jiffies = jiffies + azx_dev->min_jiffies; + } if (start) azx_stream_start(chip, azx_dev); else @@ -1703,6 +1709,11 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev) { unsigned int pos; + if (azx_dev->start_flag && + time_before_eq(jiffies, azx_dev->start_jiffies)) + return -1; /* bogus (too early) interrupt */ + azx_dev->start_flag = 0; + pos = azx_get_position(chip, azx_dev); if (chip->position_fix == POS_FIX_AUTO) { if (!pos) { -- cgit v0.10.2 From bbf6ad1399e9516b0a95de3ad58ffbaed670e4cc Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Fri, 10 Apr 2009 12:28:58 +0200 Subject: [ALSA] pcm-midlevel: Add more strict buffer position checks based on jiffies Some drivers like Intel8x0 or Intel HDA are broken for some hardware variants. This patch adds more strict buffer position checks based on jiffies when internal hw_ptr is updated. Enable xrun_debug to see mangling of wrong positions. As a side effect, the hw_ptr interrupt update routine might do slightly better job when many interrupts are lost. Signed-off-by: Jaroslav Kysela diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 8904b19..c172968 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -268,7 +268,8 @@ struct snd_pcm_runtime { int overrange; snd_pcm_uframes_t avail_max; snd_pcm_uframes_t hw_ptr_base; /* Position at buffer restart */ - snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time*/ + snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */ + unsigned long hw_ptr_jiffies; /* Time when hw_ptr is updated */ /* -- HW params -- */ snd_pcm_access_t access; /* access mode */ diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index fbb2e39..63d088f 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -209,9 +209,11 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; snd_pcm_uframes_t pos; - snd_pcm_uframes_t new_hw_ptr, hw_ptr_interrupt, hw_base; - snd_pcm_sframes_t delta; + snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_ptr_interrupt, hw_base; + snd_pcm_sframes_t hdelta, delta; + unsigned long jdelta; + old_hw_ptr = runtime->status->hw_ptr; pos = snd_pcm_update_hw_ptr_pos(substream, runtime); if (pos == SNDRV_PCM_POS_XRUN) { xrun(substream); @@ -247,7 +249,30 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; } } - if (delta > runtime->period_size) { + hdelta = new_hw_ptr - old_hw_ptr; + jdelta = jiffies - runtime->hw_ptr_jiffies; + if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) { + delta = jdelta / + (((runtime->period_size * HZ) / runtime->rate) + + HZ/100); + hw_ptr_error(substream, + "hw_ptr skipping! [Q] " + "(pos=%ld, delta=%ld, period=%ld, " + "jdelta=%lu/%lu/%lu)\n", + (long)pos, (long)hdelta, + (long)runtime->period_size, jdelta, + ((hdelta * HZ) / runtime->rate), delta); + hw_ptr_interrupt = runtime->hw_ptr_interrupt + + runtime->period_size * delta; + if (hw_ptr_interrupt >= runtime->boundary) + hw_ptr_interrupt -= runtime->boundary; + /* rebase to interrupt position */ + hw_base = new_hw_ptr = hw_ptr_interrupt; + /* align hw_base to buffer_size */ + hw_base -= hw_base % runtime->buffer_size; + delta = 0; + } + if (delta > runtime->period_size + runtime->period_size / 2) { hw_ptr_error(substream, "Lost interrupts? " "(stream=%i, delta=%ld, intr_ptr=%ld)\n", @@ -263,6 +288,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) runtime->hw_ptr_base = hw_base; runtime->status->hw_ptr = new_hw_ptr; + runtime->hw_ptr_jiffies = jiffies; runtime->hw_ptr_interrupt = hw_ptr_interrupt; return snd_pcm_update_hw_ptr_post(substream, runtime); @@ -275,6 +301,7 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) snd_pcm_uframes_t pos; snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base; snd_pcm_sframes_t delta; + unsigned long jdelta; old_hw_ptr = runtime->status->hw_ptr; pos = snd_pcm_update_hw_ptr_pos(substream, runtime); @@ -286,14 +313,15 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; delta = new_hw_ptr - old_hw_ptr; + jdelta = jiffies - runtime->hw_ptr_jiffies; if (delta < 0) { delta += runtime->buffer_size; if (delta < 0) { hw_ptr_error(substream, "Unexpected hw_pointer value [2] " - "(stream=%i, pos=%ld, old_ptr=%ld)\n", + "(stream=%i, pos=%ld, old_ptr=%ld, jdelta=%li)\n", substream->stream, (long)pos, - (long)old_hw_ptr); + (long)old_hw_ptr, jdelta); return 0; } hw_base += runtime->buffer_size; @@ -301,12 +329,13 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) hw_base = 0; new_hw_ptr = hw_base + pos; } - if (delta > runtime->period_size && runtime->periods > 1) { + if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) { hw_ptr_error(substream, "hw_ptr skipping! " - "(pos=%ld, delta=%ld, period=%ld)\n", + "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n", (long)pos, (long)delta, - (long)runtime->period_size); + (long)runtime->period_size, jdelta, + ((delta * HZ) / runtime->rate)); return 0; } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && @@ -315,6 +344,7 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) runtime->hw_ptr_base = hw_base; runtime->status->hw_ptr = new_hw_ptr; + runtime->hw_ptr_jiffies = jiffies; return snd_pcm_update_hw_ptr_post(substream, runtime); } @@ -1441,6 +1471,7 @@ static int snd_pcm_lib_ioctl_reset(struct snd_pcm_substream *substream, runtime->status->hw_ptr %= runtime->buffer_size; else runtime->status->hw_ptr = 0; + runtime->hw_ptr_jiffies = jiffies; snd_pcm_stream_unlock_irqrestore(substream, flags); return 0; } -- cgit v0.10.2 From d1e7e02f30be672c6f6ee40908be83877a0d49d1 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 2 Apr 2009 15:16:56 +0800 Subject: tracing: disable seeking for trace_pipe_raw Impact: disable pread() We set tracing_buffers_fops.llseek to no_llseek, but we can still perform pread() to read this file. That is not expected. This fix uses nonseekable_open() to disable it. tracing_buffers_fops.llseek is still set to no_llseek, it mark this file is a "non-seekable device" and is used by sys_splice(). See also do_splice() or manual of splice(2): ERRORS EINVAL Target file system doesn't support splicing; neither of the descriptors refers to a pipe; or offset given for non-seekable device. Signed-off-by: Lai Jiangshan Cc: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49D46668.8030806@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9d28476..24b0168 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3285,7 +3285,7 @@ static int tracing_buffers_open(struct inode *inode, struct file *filp) filp->private_data = info; - return 0; + return nonseekable_open(inode, filp); out: kfree(info); -- cgit v0.10.2 From ddd538f3e6a1a4bec2f6942f83a753263e6577b4 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 2 Apr 2009 15:16:59 +0800 Subject: tracing: allocate page when needed Impact: Cleanup Sometimes, we open trace_pipe_raw, but we don't read(2) it, we just splice(2) it, thus, the page is not used. Signed-off-by: Lai Jiangshan Cc: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49D4666B.4010608@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 24b0168..8e189ff 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3277,19 +3277,13 @@ static int tracing_buffers_open(struct inode *inode, struct file *filp) info->tr = &global_trace; info->cpu = cpu; - info->spare = ring_buffer_alloc_read_page(info->tr->buffer); + info->spare = NULL; /* Force reading ring buffer for first read */ info->read = (unsigned int)-1; - if (!info->spare) - goto out; filp->private_data = info; return nonseekable_open(inode, filp); - - out: - kfree(info); - return -ENOMEM; } static ssize_t @@ -3304,6 +3298,11 @@ tracing_buffers_read(struct file *filp, char __user *ubuf, if (!count) return 0; + if (!info->spare) + info->spare = ring_buffer_alloc_read_page(info->tr->buffer); + if (!info->spare) + return -ENOMEM; + /* Do we have previous read data to read? */ if (info->read < PAGE_SIZE) goto read; @@ -3342,7 +3341,8 @@ static int tracing_buffers_release(struct inode *inode, struct file *file) { struct ftrace_buffer_info *info = file->private_data; - ring_buffer_free_read_page(info->tr->buffer, info->spare); + if (info->spare) + ring_buffer_free_read_page(info->tr->buffer, info->spare); kfree(info); return 0; -- cgit v0.10.2 From c7625a555f55d7ae49236cde551786c88f5a5ce1 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 2 Apr 2009 15:17:04 +0800 Subject: tracing: update file->f_pos when splice(2) it Impact: Cleanup These two lines: if (unlikely(*ppos)) return -ESPIPE; in tracing_buffers_splice_read() are not needed, VFS layer has disabled seek(2). We remove these two lines, and then we can update file->f_pos. And tracing_buffers_read() updates file->f_pos, this fix make tracing_buffers_splice_read() updates file->f_pos too. Signed-off-by: Lai Jiangshan Cc: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49D46670.4010503@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 8e189ff..9462976 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3428,13 +3428,6 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, int size, i; size_t ret; - /* - * We can't seek on a buffer input - */ - if (unlikely(*ppos)) - return -ESPIPE; - - for (i = 0; i < PIPE_BUFFERS && len; i++, len -= size) { struct page *page; int r; @@ -3474,6 +3467,7 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, spd.partial[i].offset = 0; spd.partial[i].private = (unsigned long)ref; spd.nr_pages++; + *ppos += size; } spd.nr_pages = i; -- cgit v0.10.2 From 93cfb3c9fd83d877a8f1ffad9ff862b617b32828 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 2 Apr 2009 15:17:08 +0800 Subject: tracing: fix splice return too large I got these from strace: splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 12288 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 12288 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 12288 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 16384 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 8192 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 8192 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 8192 I wanted to splice_read 4096 bytes, but it returns 8192 or larger. It is because the return value of tracing_buffers_splice_read() does not include "zero out any left over data" bytes. But tracing_buffers_read() includes these bytes, we make them consistent. Signed-off-by: Lai Jiangshan Cc: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49D46674.9030804@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9462976..1ce5dc6 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3428,7 +3428,19 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, int size, i; size_t ret; - for (i = 0; i < PIPE_BUFFERS && len; i++, len -= size) { + if (*ppos & (PAGE_SIZE - 1)) { + WARN_ONCE(1, "Ftrace: previous read must page-align\n"); + return -EINVAL; + } + + if (len & (PAGE_SIZE - 1)) { + WARN_ONCE(1, "Ftrace: splice_read should page-align\n"); + if (len < PAGE_SIZE) + return -EINVAL; + len &= PAGE_MASK; + } + + for (i = 0; i < PIPE_BUFFERS && len; i++, len -= PAGE_SIZE) { struct page *page; int r; @@ -3467,7 +3479,7 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, spd.partial[i].offset = 0; spd.partial[i].private = (unsigned long)ref; spd.nr_pages++; - *ppos += size; + *ppos += PAGE_SIZE; } spd.nr_pages = i; -- cgit v0.10.2 From 4d1f4372dbea068ba4ee3d98231133a4a4ee15bd Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 10 Apr 2009 08:48:36 +0800 Subject: tracing: fix document references When moving documents to Documentation/trace/, I forgot to grep Kconfig to find out those references. Signed-off-by: Li Zefan Cc: Steven Rostedt Cc: Frederic Weisbecker Cc: Pekka Enberg Cc: Pekka Paalanen Cc: eduard.munteanu@linux360.ro LKML-Reference: <49DE97EF.7080208@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 2246141..417d198 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -312,7 +312,7 @@ config KMEMTRACE and profile kernel code. This requires an userspace application to use. See - Documentation/vm/kmemtrace.txt for more information. + Documentation/trace/kmemtrace.txt for more information. Saying Y will make the kernel somewhat larger and slower. However, if you disable kmemtrace at run-time or boot-time, the performance @@ -403,7 +403,7 @@ config MMIOTRACE implementation and works via page faults. Tracing is disabled by default and can be enabled at run-time. - See Documentation/tracers/mmiotrace.txt. + See Documentation/trace/mmiotrace.txt. If you are not helping to develop drivers, say N. config MMIOTRACE_TEST -- cgit v0.10.2 From 746cddd37d48a166f170165a0df4bd50fde1ea60 Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 10 Apr 2009 17:17:17 +0800 Subject: x86, intr-remap: fix eoi for interrupt remapping without x2apic To simplify level irq migration in the presence of interrupt-remapping, Suresh used a virtual vector (io-apic pin number) to eliminate io-apic RTE modification. Level triggered interrupt will appear as an edge to the local apic cpu but still as level to the IO-APIC. So in addition to do the local apic EOI, it still needs to do IO-APIC directed EOI to clear the remote IRR bit in the IO-APIC RTE. Pls refer to Suresh's patch for more details (commit 0280f7c416c652a2fd95d166f52b199ae61122c0). Now interrupt remapping is decoupled from x2apic, it also needs to do the directed EOI for apic. Otherwise, apic interrupts won't work correctly. Signed-off-by: Weidong Han Cc: iommu@lists.linux-foundation.org Cc: Weidong Han Cc: suresh.b.siddha@intel.com Cc: dwmw2@infradead.org Cc: allen.m.kay@intel.com LKML-Reference: <1239355037-22856-1-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 767fe7e..a2789e4 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2524,7 +2524,6 @@ static void irq_complete_move(struct irq_desc **descp) static inline void irq_complete_move(struct irq_desc **descp) {} #endif -#ifdef CONFIG_X86_X2APIC static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) { int apic, pin; @@ -2558,6 +2557,7 @@ eoi_ioapic_irq(struct irq_desc *desc) spin_unlock_irqrestore(&ioapic_lock, flags); } +#ifdef CONFIG_X86_X2APIC static void ack_x2apic_level(unsigned int irq) { struct irq_desc *desc = irq_to_desc(irq); @@ -2634,6 +2634,9 @@ static void ack_apic_level(unsigned int irq) */ ack_APIC_irq(); + if (irq_remapped(irq)) + eoi_ioapic_irq(desc); + /* Now we can move and renable the irq */ if (unlikely(do_unmask_irq)) { /* Only migrate the irq if the ack has been received. -- cgit v0.10.2 From a0d22f485af1553060b4094ee0154537a8f6a8a6 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Thu, 9 Apr 2009 16:45:29 -0700 Subject: x86: Document get_user_pages_fast() While better than get_user_pages(), the usage of gupf(), especially the return values and the fact that it can potentially only partially pin the range, warranted some documentation. Signed-off-by: Andy Grover Cc: npiggin@suse.de Cc: akpm@linux-foundation.org LKML-Reference: <1239320729-3262-1-git-send-email-andy.grover@oracle.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index be54176..6340cef 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -219,6 +219,22 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, return 1; } +/** + * get_user_pages_fast() - pin user pages in memory + * @start: starting user address + * @nr_pages: number of pages from start to pin + * @write: whether pages will be written to + * @pages: array that receives pointers to the pages pinned. + * Should be at least nr_pages long. + * + * Attempt to pin user pages in memory without taking mm->mmap_sem. + * If not successful, it will fall back to taking the lock and + * calling get_user_pages(). + * + * Returns number of pages pinned. This may be fewer than the number + * requested. If nr_pages is 0 or negative, returns 0. If no pages + * were pinned, returns -errno. + */ int get_user_pages_fast(unsigned long start, int nr_pages, int write, struct page **pages) { -- cgit v0.10.2 From 43a432b1559798d33970261f710030f787770231 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 9 Apr 2009 14:26:47 -0700 Subject: x86, CPA: Change idmap attribute before ioremap attribute setup Change the identity mapping with the requested attribute first, before we setup the virtual memory mapping with the new requested attribute. This makes sure that there is no window when identity map'ed attribute may disagree with ioremap range on the attribute type. This also avoids doing cpa on the ioremap'ed address twice (first in ioremap_page_range and then in ioremap_change_attr using vaddr), and should improve ioremap performance a bit. Signed-off-by: Suresh Siddha Signed-off-by: Venkatesh Pallipadi LKML-Reference: <20090409212708.373330000@intel.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 0dfa09d..329387e 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -280,15 +280,16 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, return NULL; area->phys_addr = phys_addr; vaddr = (unsigned long) area->addr; - if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { + + if (kernel_map_sync_memtype(phys_addr, size, prot_val)) { free_memtype(phys_addr, phys_addr + size); free_vm_area(area); return NULL; } - if (ioremap_change_attr(vaddr, size, prot_val) < 0) { + if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { free_memtype(phys_addr, phys_addr + size); - vunmap(area->addr); + free_vm_area(area); return NULL; } -- cgit v0.10.2 From a5593e0b329a14dea41ea173380dbf1533de2bd2 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Thu, 9 Apr 2009 14:26:48 -0700 Subject: x86, PAT: Change order of cpa and free in set_memory_wb To be free of aliasing due to races, set_memory_* interfaces should follow ordering of reserving, changing memtype to UC/WC, changing memtype back to WB followed by free. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha LKML-Reference: <20090409212708.512280000@intel.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index d71e1b6..d487eaa 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -1021,15 +1021,19 @@ int _set_memory_wb(unsigned long addr, int numpages) int set_memory_wb(unsigned long addr, int numpages) { + int ret = _set_memory_wb(addr, numpages); free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); - - return _set_memory_wb(addr, numpages); + return ret; } EXPORT_SYMBOL(set_memory_wb); int set_memory_array_wb(unsigned long *addr, int addrinarray) { int i; + int ret; + + ret = change_page_attr_clear(addr, addrinarray, + __pgprot(_PAGE_CACHE_MASK), 1); for (i = 0; i < addrinarray; i++) { unsigned long start = __pa(addr[i]); @@ -1042,8 +1046,7 @@ int set_memory_array_wb(unsigned long *addr, int addrinarray) } free_memtype(start, end); } - return change_page_attr_clear(addr, addrinarray, - __pgprot(_PAGE_CACHE_MASK), 1); + return ret; } EXPORT_SYMBOL(set_memory_array_wb); -- cgit v0.10.2 From 9fa3ab390abfc8b49fc0dd7c845b0ad224ec429f Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Thu, 9 Apr 2009 14:26:49 -0700 Subject: x86, PAT: Handle faults cleanly in set_memory_ APIs Handle faults and do proper cleanups in set_memory_*() functions. In some cases, these functions were not doing proper free on failure paths. With the changes to tracking memtype of RAM pages in struct page instead of pat list, we do not need the changes in commits c5e147. This patch reverts that change. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha LKML-Reference: <20090409212708.653222000@intel.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index d487eaa..985eef8 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -945,52 +945,56 @@ int _set_memory_uc(unsigned long addr, int numpages) int set_memory_uc(unsigned long addr, int numpages) { + int ret; + /* * for now UC MINUS. see comments in ioremap_nocache() */ - if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, - _PAGE_CACHE_UC_MINUS, NULL)) - return -EINVAL; + ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, + _PAGE_CACHE_UC_MINUS, NULL); + if (ret) + goto out_err; + + ret = _set_memory_uc(addr, numpages); + if (ret) + goto out_free; + + return 0; - return _set_memory_uc(addr, numpages); +out_free: + free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); +out_err: + return ret; } EXPORT_SYMBOL(set_memory_uc); int set_memory_array_uc(unsigned long *addr, int addrinarray) { - unsigned long start; - unsigned long end; - int i; + int i, j; + int ret; + /* * for now UC MINUS. see comments in ioremap_nocache() */ for (i = 0; i < addrinarray; i++) { - start = __pa(addr[i]); - for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) { - if (end != __pa(addr[i + 1])) - break; - i++; - } - if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL)) - goto out; + ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE, + _PAGE_CACHE_UC_MINUS, NULL); + if (ret) + goto out_free; } - return change_page_attr_set(addr, addrinarray, + ret = change_page_attr_set(addr, addrinarray, __pgprot(_PAGE_CACHE_UC_MINUS), 1); -out: - for (i = 0; i < addrinarray; i++) { - unsigned long tmp = __pa(addr[i]); - - if (tmp == start) - break; - for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) { - if (end != __pa(addr[i + 1])) - break; - i++; - } - free_memtype(tmp, end); - } - return -EINVAL; + if (ret) + goto out_free; + + return 0; + +out_free: + for (j = 0; j < i; j++) + free_memtype(__pa(addr[j]), __pa(addr[j]) + PAGE_SIZE); + + return ret; } EXPORT_SYMBOL(set_memory_array_uc); @@ -1002,14 +1006,26 @@ int _set_memory_wc(unsigned long addr, int numpages) int set_memory_wc(unsigned long addr, int numpages) { + int ret; + if (!pat_enabled) return set_memory_uc(addr, numpages); - if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, - _PAGE_CACHE_WC, NULL)) - return -EINVAL; + ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, + _PAGE_CACHE_WC, NULL); + if (ret) + goto out_err; - return _set_memory_wc(addr, numpages); + ret = _set_memory_wc(addr, numpages); + if (ret) + goto out_free; + + return 0; + +out_free: + free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); +out_err: + return ret; } EXPORT_SYMBOL(set_memory_wc); @@ -1021,9 +1037,14 @@ int _set_memory_wb(unsigned long addr, int numpages) int set_memory_wb(unsigned long addr, int numpages) { - int ret = _set_memory_wb(addr, numpages); + int ret; + + ret = _set_memory_wb(addr, numpages); + if (ret) + return ret; + free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); - return ret; + return 0; } EXPORT_SYMBOL(set_memory_wb); @@ -1034,19 +1055,13 @@ int set_memory_array_wb(unsigned long *addr, int addrinarray) ret = change_page_attr_clear(addr, addrinarray, __pgprot(_PAGE_CACHE_MASK), 1); + if (ret) + return ret; - for (i = 0; i < addrinarray; i++) { - unsigned long start = __pa(addr[i]); - unsigned long end; + for (i = 0; i < addrinarray; i++) + free_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE); - for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) { - if (end != __pa(addr[i + 1])) - break; - i++; - } - free_memtype(start, end); - } - return ret; + return 0; } EXPORT_SYMBOL(set_memory_array_wb); @@ -1139,6 +1154,8 @@ int set_pages_array_wb(struct page **pages, int addrinarray) retval = cpa_clear_pages_array(pages, addrinarray, __pgprot(_PAGE_CACHE_MASK)); + if (retval) + return retval; for (i = 0; i < addrinarray; i++) { start = (unsigned long)page_address(pages[i]); @@ -1146,7 +1163,7 @@ int set_pages_array_wb(struct page **pages, int addrinarray) free_memtype(start, end); } - return retval; + return 0; } EXPORT_SYMBOL(set_pages_array_wb); -- cgit v0.10.2 From 3869c4aa18835c8c61b44bd0f3ace36e9d3b5bd0 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Thu, 9 Apr 2009 14:26:50 -0700 Subject: x86, PAT: Changing memtype to WC ensuring no WB alias As per SDM, there should not be any aliasing of a WC with any cacheable type across CPUs. That is if one CPU is changing the identity map memtype to _WC, no other CPU at the time of this change should not have a TLB for this page that carries a WB attribute. SDM suggests to make the page not present. But for that we will have to handle any page faults that can potentially happen due to these pages being not present. Other way to deal with this without having any WB mapping is to change the page first to UC and then to WC. This ensures that we meet the SDM requirement of no cacheable alais to WC page. This also has same or lower overhead than marking the page not present and making it present later. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha LKML-Reference: <20090409212708.797481000@intel.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 985eef8..797f9f1 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -1000,8 +1000,15 @@ EXPORT_SYMBOL(set_memory_array_uc); int _set_memory_wc(unsigned long addr, int numpages) { - return change_page_attr_set(&addr, numpages, + int ret; + ret = change_page_attr_set(&addr, numpages, + __pgprot(_PAGE_CACHE_UC_MINUS), 0); + + if (!ret) { + ret = change_page_attr_set(&addr, numpages, __pgprot(_PAGE_CACHE_WC), 0); + } + return ret; } int set_memory_wc(unsigned long addr, int numpages) -- cgit v0.10.2 From b6ff32d9aaeeeecf98f9a852d715569183585312 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 9 Apr 2009 14:26:51 -0700 Subject: x86, PAT: Consolidate code in pat_x_mtrr_type() and reserve_memtype() Fix pat_x_mtrr_type() to use UC_MINUS when the mtrr type return UC. This is to be consistent with ioremap() and ioremap_nocache() which uses UC_MINUS. Consolidate the code such that reserve_memtype() also uses pat_x_mtrr_type() when the caller doesn't specify any special attribute (non WB attribute). Signed-off-by: Suresh Siddha Signed-off-by: Venkatesh Pallipadi LKML-Reference: <20090409212708.939936000@intel.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 329387e..d4c4b2c 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -375,7 +375,8 @@ static void __iomem *ioremap_default(resource_size_t phys_addr, * - UC_MINUS for non-WB-able memory with no other conflicting mappings * - Inherit from confliting mappings otherwise */ - err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags); + err = reserve_memtype(phys_addr, phys_addr + size, + _PAGE_CACHE_WB, &flags); if (err < 0) return NULL; diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 640339e..8d3de95 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -182,10 +182,10 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type) u8 mtrr_type; mtrr_type = mtrr_type_lookup(start, end); - if (mtrr_type == MTRR_TYPE_UNCACHABLE) - return _PAGE_CACHE_UC; - if (mtrr_type == MTRR_TYPE_WRCOMB) - return _PAGE_CACHE_WC; + if (mtrr_type != MTRR_TYPE_WRBACK) + return _PAGE_CACHE_UC_MINUS; + + return _PAGE_CACHE_WB; } return req_type; @@ -352,23 +352,13 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, return 0; } - if (req_type == -1) { - /* - * Call mtrr_lookup to get the type hint. This is an - * optimization for /dev/mem mmap'ers into WB memory (BIOS - * tools and ACPI tools). Use WB request for WB memory and use - * UC_MINUS otherwise. - */ - u8 mtrr_type = mtrr_type_lookup(start, end); - - if (mtrr_type == MTRR_TYPE_WRBACK) - actual_type = _PAGE_CACHE_WB; - else - actual_type = _PAGE_CACHE_UC_MINUS; - } else { - actual_type = pat_x_mtrr_type(start, end, - req_type & _PAGE_CACHE_MASK); - } + /* + * Call mtrr_lookup to get the type hint. This is an + * optimization for /dev/mem mmap'ers into WB memory (BIOS + * tools and ACPI tools). Use WB request for WB memory and use + * UC_MINUS otherwise. + */ + actual_type = pat_x_mtrr_type(start, end, req_type & _PAGE_CACHE_MASK); if (new_type) *new_type = actual_type; @@ -587,7 +577,8 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, if (flags != -1) { retval = reserve_memtype(offset, offset + size, flags, NULL); } else { - retval = reserve_memtype(offset, offset + size, -1, &flags); + retval = reserve_memtype(offset, offset + size, + _PAGE_CACHE_WB, &flags); } if (retval < 0) -- cgit v0.10.2 From 0c3c8a18361a636069f5a5d9d0d0f9c2124e6b94 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 9 Apr 2009 14:26:52 -0700 Subject: x86, PAT: Remove duplicate memtype reserve in devmem mmap /dev/mem mmap code was doing memtype reserve/free for a while now. Recently we added memtype tracking in remap_pfn_range, and /dev/mem mmap uses it indirectly. So, we don't need seperate tracking in /dev/mem code any more. That means another ~100 lines of code removed :-). Signed-off-by: Suresh Siddha Signed-off-by: Venkatesh Pallipadi LKML-Reference: <20090409212709.085210000@intel.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h index 2cd07b9..7af14e5 100644 --- a/arch/x86/include/asm/pat.h +++ b/arch/x86/include/asm/pat.h @@ -18,9 +18,5 @@ extern int free_memtype(u64 start, u64 end); extern int kernel_map_sync_memtype(u64 base, unsigned long size, unsigned long flag); -extern void map_devmem(unsigned long pfn, unsigned long size, - struct pgprot vma_prot); -extern void unmap_devmem(unsigned long pfn, unsigned long size, - struct pgprot vma_prot); #endif /* _ASM_X86_PAT_H */ diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 8d3de95..cc5e0e2 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -536,9 +536,7 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size) int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, unsigned long size, pgprot_t *vma_prot) { - u64 offset = ((u64) pfn) << PAGE_SHIFT; - unsigned long flags = -1; - int retval; + unsigned long flags = _PAGE_CACHE_WB; if (!range_is_allowed(pfn, size)) return 0; @@ -566,65 +564,11 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, } #endif - /* - * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot. - * - * Without O_SYNC, we want to get - * - WB for WB-able memory and no other conflicting mappings - * - UC_MINUS for non-WB-able memory with no other conflicting mappings - * - Inherit from confliting mappings otherwise - */ - if (flags != -1) { - retval = reserve_memtype(offset, offset + size, flags, NULL); - } else { - retval = reserve_memtype(offset, offset + size, - _PAGE_CACHE_WB, &flags); - } - - if (retval < 0) - return 0; - - if (((pfn < max_low_pfn_mapped) || - (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) && - ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) { - free_memtype(offset, offset + size); - printk(KERN_INFO - "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n", - current->comm, current->pid, - cattr_name(flags), - offset, (unsigned long long)(offset + size)); - return 0; - } - *vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) | flags); return 1; } -void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) -{ - unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK); - u64 addr = (u64)pfn << PAGE_SHIFT; - unsigned long flags; - - reserve_memtype(addr, addr + size, want_flags, &flags); - if (flags != want_flags) { - printk(KERN_INFO - "%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n", - current->comm, current->pid, - cattr_name(want_flags), - addr, (unsigned long long)(addr + size), - cattr_name(flags)); - } -} - -void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) -{ - u64 addr = (u64)pfn << PAGE_SHIFT; - - free_memtype(addr, addr + size); -} - /* * Change the memory type for the physial address range in kernel identity * mapping space if that range is a part of identity map. @@ -662,8 +606,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot, { int is_ram = 0; int ret; - unsigned long flags; unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK); + unsigned long flags = want_flags; is_ram = pat_pagerange_is_ram(paddr, paddr + size); diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 3586b3b..8f05c38 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -301,33 +301,7 @@ static inline int private_mapping_ok(struct vm_area_struct *vma) } #endif -void __attribute__((weak)) -map_devmem(unsigned long pfn, unsigned long len, pgprot_t prot) -{ - /* nothing. architectures can override. */ -} - -void __attribute__((weak)) -unmap_devmem(unsigned long pfn, unsigned long len, pgprot_t prot) -{ - /* nothing. architectures can override. */ -} - -static void mmap_mem_open(struct vm_area_struct *vma) -{ - map_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - -static void mmap_mem_close(struct vm_area_struct *vma) -{ - unmap_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - static struct vm_operations_struct mmap_mem_ops = { - .open = mmap_mem_open, - .close = mmap_mem_close, #ifdef CONFIG_HAVE_IOREMAP_PROT .access = generic_access_phys #endif @@ -362,7 +336,6 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma) vma->vm_pgoff, size, vma->vm_page_prot)) { - unmap_devmem(vma->vm_pgoff, size, vma->vm_page_prot); return -EAGAIN; } return 0; -- cgit v0.10.2 From da7616610c8d2ec16a8ada44216e836e5fcbd08b Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 10 Apr 2009 14:19:03 +0100 Subject: Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/. Signed-off-by: David Howells diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile index 6673a28..a5985ee 100644 --- a/arch/mn10300/Makefile +++ b/arch/mn10300/Makefile @@ -105,31 +105,31 @@ endif ################################################################################################### # processor specific definitions -include/asm-mn10300/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-mn10300/proc -> include/asm-mn10300/proc-$(PROCESSOR)' +arch/mn10300/include/asm/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf + @echo ' SYMLINK arch/mn10300/include/asm/proc -> arch/mn10300/include/asm/proc-$(PROCESSOR)' ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-mn10300 - $(Q)ln -fsn $(srctree)/include/asm-mn10300/proc-$(PROCESSOR) include/asm-mn10300/proc + $(Q)mkdir -p arch/mn10300/include/asm + $(Q)ln -fsn $(srctree)/arch/mn10300/include/asm/proc-$(PROCESSOR) arch/mn10300/include/asm/proc else - $(Q)ln -fsn proc-$(PROCESSOR) include/asm-mn10300/proc + $(Q)ln -fsn proc-$(PROCESSOR) arch/mn10300/include/asm/proc endif @touch $@ -CLEAN_FILES += include/asm-mn10300/proc include/asm-mn10300/.proc +CLEAN_FILES += arch/mn10300/include/asm/proc arch/mn10300/include/asm/.proc -prepare: include/asm-mn10300/.proc +prepare: arch/mn10300/include/asm/.proc # unit specific definitions -include/asm-mn10300/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-mn10300/unit -> include/asm-mn10300/unit-$(UNIT)' +arch/mn10300/include/asm/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf + @echo ' SYMLINK arch/mn10300/include/asm/unit -> arch/mn10300/include/asm/unit-$(UNIT)' ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-mn10300 - $(Q)ln -fsn $(srctree)/include/asm-mn10300/unit-$(UNIT) include/asm-mn10300/unit + $(Q)mkdir -p arch/mn10300/include/asm + $(Q)ln -fsn $(srctree)/arch/mn10300/include/asm/unit-$(UNIT) arch/mn10300/include/asm/unit else - $(Q)ln -fsn unit-$(UNIT) include/asm-mn10300/unit + $(Q)ln -fsn unit-$(UNIT) arch/mn10300/include/asm/unit endif @touch $@ -CLEAN_FILES += include/asm-mn10300/unit include/asm-mn10300/.unit +CLEAN_FILES += arch/mn10300/include/asm/unit arch/mn10300/include/asm/.unit -prepare: include/asm-mn10300/.unit +prepare: arch/mn10300/include/asm/.unit diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild new file mode 100644 index 0000000..c68e168 --- /dev/null +++ b/arch/mn10300/include/asm/Kbuild @@ -0,0 +1 @@ +include include/asm-generic/Kbuild.asm diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h new file mode 100644 index 0000000..bc06482 --- /dev/null +++ b/arch/mn10300/include/asm/atomic.h @@ -0,0 +1,157 @@ +/* MN10300 Atomic counter operations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_ATOMIC_H +#define _ASM_ATOMIC_H + +#ifdef CONFIG_SMP +#error not SMP safe +#endif + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ + +/** + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_read(v) ((v)->counter) + +/** + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_set(v, i) (((v)->counter) = (i)) + +#include + +/** + * atomic_add_return - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long flags; + int temp; + + local_irq_save(flags); + temp = v->counter; + temp += i; + v->counter = temp; + local_irq_restore(flags); + + return temp; +} + +/** + * atomic_sub_return - subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long flags; + int temp; + + local_irq_save(flags); + temp = v->counter; + temp -= i; + v->counter = temp; + local_irq_restore(flags); + + return temp; +} + +static inline int atomic_add_negative(int i, atomic_t *v) +{ + return atomic_add_return(i, v) < 0; +} + +static inline void atomic_add(int i, atomic_t *v) +{ + atomic_add_return(i, v); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + atomic_sub_return(i, v); +} + +static inline void atomic_inc(atomic_t *v) +{ + atomic_add_return(1, v); +} + +static inline void atomic_dec(atomic_t *v) +{ + atomic_sub_return(1, v); +} + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ + unsigned long flags; + + mask = ~mask; + local_irq_save(flags); + *addr &= mask; + local_irq_restore(flags); +} + +#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) +#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) + +/* Atomic operations are already serializing on MN10300??? */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include + +#endif /* __KERNEL__ */ +#endif /* _ASM_ATOMIC_H */ diff --git a/arch/mn10300/include/asm/auxvec.h b/arch/mn10300/include/asm/auxvec.h new file mode 100644 index 0000000..4fdb60b --- /dev/null +++ b/arch/mn10300/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef _ASM_AUXVEC_H +#define _ASM_AUXVEC_H + +#endif diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h new file mode 100644 index 0000000..0b610f4 --- /dev/null +++ b/arch/mn10300/include/asm/bitops.h @@ -0,0 +1,240 @@ +/* MN10300 bit operations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + * + * These have to be done with inline assembly: that way the bit-setting + * is guaranteed to be atomic. All bit operations return 0 if the bit + * was cleared before the operation and != 0 if it was not. + * + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ +#ifndef __ASM_BITOPS_H +#define __ASM_BITOPS_H + +#include + +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/* + * set bit + */ +#define __set_bit(nr, addr) \ +({ \ + volatile unsigned char *_a = (unsigned char *)(addr); \ + const unsigned shift = (nr) & 7; \ + _a += (nr) >> 3; \ + \ + asm volatile("bset %2,(%1) # set_bit reg" \ + : "=m"(*_a) \ + : "a"(_a), "d"(1 << shift), "m"(*_a) \ + : "memory", "cc"); \ +}) + +#define set_bit(nr, addr) __set_bit((nr), (addr)) + +/* + * clear bit + */ +#define ___clear_bit(nr, addr) \ +({ \ + volatile unsigned char *_a = (unsigned char *)(addr); \ + const unsigned shift = (nr) & 7; \ + _a += (nr) >> 3; \ + \ + asm volatile("bclr %2,(%1) # clear_bit reg" \ + : "=m"(*_a) \ + : "a"(_a), "d"(1 << shift), "m"(*_a) \ + : "memory", "cc"); \ +}) + +#define clear_bit(nr, addr) ___clear_bit((nr), (addr)) + + +static inline void __clear_bit(int nr, volatile void *addr) +{ + unsigned int *a = (unsigned int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a &= ~mask; +} + +/* + * test bit + */ +static inline int test_bit(int nr, const volatile void *addr) +{ + return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31)); +} + +/* + * change bit + */ +static inline void __change_bit(int nr, volatile void *addr) +{ + int mask; + unsigned int *a = (unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a ^= mask; +} + +extern void change_bit(int nr, volatile void *addr); + +/* + * test and set bit + */ +#define __test_and_set_bit(nr,addr) \ +({ \ + volatile unsigned char *_a = (unsigned char *)(addr); \ + const unsigned shift = (nr) & 7; \ + unsigned epsw; \ + _a += (nr) >> 3; \ + \ + asm volatile("bset %3,(%2) # test_set_bit reg\n" \ + "mov epsw,%1" \ + : "=m"(*_a), "=d"(epsw) \ + : "a"(_a), "d"(1 << shift), "m"(*_a) \ + : "memory", "cc"); \ + \ + !(epsw & EPSW_FLAG_Z); \ +}) + +#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr)) + +/* + * test and clear bit + */ +#define __test_and_clear_bit(nr, addr) \ +({ \ + volatile unsigned char *_a = (unsigned char *)(addr); \ + const unsigned shift = (nr) & 7; \ + unsigned epsw; \ + _a += (nr) >> 3; \ + \ + asm volatile("bclr %3,(%2) # test_clear_bit reg\n" \ + "mov epsw,%1" \ + : "=m"(*_a), "=d"(epsw) \ + : "a"(_a), "d"(1 << shift), "m"(*_a) \ + : "memory", "cc"); \ + \ + !(epsw & EPSW_FLAG_Z); \ +}) + +#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr)) + +/* + * test and change bit + */ +static inline int __test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + unsigned int *a = (unsigned int *)addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a ^= mask; + + return retval; +} + +extern int test_and_change_bit(int nr, volatile void *addr); + +#include + +#ifdef __KERNEL__ + +/** + * __ffs - find first bit set + * @x: the word to search + * + * - return 31..0 to indicate bit 31..0 most least significant bit set + * - if no bits are set in x, the result is undefined + */ +static inline __attribute__((const)) +unsigned long __ffs(unsigned long x) +{ + int bit; + asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x)); + return bit; +} + +/* + * special slimline version of fls() for calculating ilog2_u32() + * - note: no protection against n == 0 + */ +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n)); + return bit; +} + +/** + * fls - find last bit set + * @x: the word to search + * + * This is defined the same way as ffs: + * - return 32..1 to indicate bit 31..0 most significant bit set + * - return 0 to indicate no bits set + */ +static inline __attribute__((const)) +int fls(int x) +{ + return (x != 0) ? __ilog2_u32(x) + 1 : 0; +} + +/** + * __fls - find last (most-significant) set bit in a long word + * @word: the word to search + * + * Undefined if no set bit exists, so code should check against 0 first. + */ +static inline unsigned long __fls(unsigned long word) +{ + return __ilog2_u32(word); +} + +/** + * ffs - find first bit set + * @x: the word to search + * + * - return 32..1 to indicate bit 31..0 most least significant bit set + * - return 0 to indicate no bits set + */ +static inline __attribute__((const)) +int ffs(int x) +{ + /* Note: (x & -x) gives us a mask that is the least significant + * (rightmost) 1-bit of the value in x. + */ + return fls(x & -x); +} + +#include +#include +#include +#include +#include + +#define ext2_set_bit_atomic(lock, nr, addr) \ + test_and_set_bit((nr) ^ 0x18, (addr)) +#define ext2_clear_bit_atomic(lock, nr, addr) \ + test_and_clear_bit((nr) ^ 0x18, (addr)) + +#include +#include + +#endif /* __KERNEL__ */ +#endif /* __ASM_BITOPS_H */ diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h new file mode 100644 index 0000000..4fcf338 --- /dev/null +++ b/arch/mn10300/include/asm/bug.h @@ -0,0 +1,35 @@ +/* MN10300 Kernel bug reporting + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_BUG_H +#define _ASM_BUG_H + +/* + * Tell the user there is some problem. + */ +#define _debug_bug_trap() \ +do { \ + asm volatile( \ + " syscall 15 \n" \ + "0: \n" \ + " .section __bug_table,\"a\" \n" \ + " .long 0b,%0,%1 \n" \ + " .previous \n" \ + : \ + : "i"(__FILE__), "i"(__LINE__) \ + ); \ +} while (0) + +#define BUG() _debug_bug_trap() + +#define HAVE_ARCH_BUG +#include + +#endif /* _ASM_BUG_H */ diff --git a/arch/mn10300/include/asm/bugs.h b/arch/mn10300/include/asm/bugs.h new file mode 100644 index 0000000..31c8bc5 --- /dev/null +++ b/arch/mn10300/include/asm/bugs.h @@ -0,0 +1,20 @@ +/* MN10300 Checks for architecture-dependent bugs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_BUGS_H +#define _ASM_BUGS_H + +#include + +static inline void __init check_bugs(void) +{ +} + +#endif /* _ASM_BUGS_H */ diff --git a/arch/mn10300/include/asm/busctl-regs.h b/arch/mn10300/include/asm/busctl-regs.h new file mode 100644 index 0000000..1632aef --- /dev/null +++ b/arch/mn10300/include/asm/busctl-regs.h @@ -0,0 +1,151 @@ +/* AM33v2 on-board bus controller registers + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_BUSCTL_REGS_H +#define _ASM_BUSCTL_REGS_H + +#include + +#ifdef __KERNEL__ + +/* bus controller registers */ +#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */ +#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */ +#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */ +#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */ +#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */ +#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */ +#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */ +#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */ +#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */ +#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */ +#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */ +#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */ +#define BCCR_API 0x00070000 /* bus arbitration priority */ +#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */ +#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */ +#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */ +#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */ +#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */ +#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */ +#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */ +#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */ +#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */ +#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */ +#define BCCR_TMON 0x03000000 /* timeout value settings */ +#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */ +#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */ +#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */ +#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */ +#define BCCR_TMOE 0x10000000 /* timeout detection enable */ + +#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */ +#define BCBERR_BESB 0x0000001f /* erroneous access destination space */ +#define BCBERR_BESB_MON 0x00000001 /* - monitor space */ +#define BCBERR_BESB_IO 0x00000002 /* - IO bus */ +#define BCBERR_BESB_EX 0x00000004 /* - EX bus */ +#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */ +#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */ +#define BCBERR_BERW 0x00000100 /* type of access */ +#define BCBERR_BERW_WRITE 0x00000000 /* - write */ +#define BCBERR_BERW_READ 0x00000100 /* - read */ +#define BCBERR_BESD 0x00000200 /* error detector */ +#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */ +#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */ +#define BCBERR_BEBST 0x00000400 /* type of access */ +#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */ +#define BCBERR_BEBST_BURST 0x00000400 /* - burst */ +#define BCBERR_BEME 0x00000800 /* multiple bus error flag */ +#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */ +#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */ +#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */ +#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */ +#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */ + +#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */ + +/* system bus controller registers */ +#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */ +#define SBBASE_BE 0x00000001 /* bank enable */ +#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */ +#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */ + +#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */ +#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */ +#define SBCNTRL0_REH 0x0000f000 /* read enable hold */ +#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */ +#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */ +#define SBCNTRL0_DAH 0x0f000000 /* data hold */ +#define SBCNTRL0_ADH 0xf0000000 /* address hold */ + +#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */ +#define SBCNTRL1_WED 0x00000f00 /* write enable delay */ +#define SBCNTRL1_RED 0x0000f000 /* read enable delay */ +#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */ +#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */ +#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */ +#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */ + +#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */ +#define SBCNTRL2_WC 0x000000ff /* wait count */ +#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */ +#define SBCNTRL2_WM 0x01000000 /* wait mode setting */ +#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */ +#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */ +#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */ +#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */ +#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */ +#define SBCNTRL2_BW 0x04000000 /* bus width */ +#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */ +#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */ +#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */ +#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */ +#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */ +#define SBCNTRL2_BT 0x70000000 /* bus type setting */ +#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */ +#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */ +#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */ +#define SBCNTRL2_BTSE 0x80000000 /* burst enable */ + +/* memory bus controller */ +#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */ +#define SDBASE_CE 0x00000001 /* chip enable */ +#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */ +#define SDBASE_CBAM_SHIFT 16 +#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */ + +#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */ +#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */ +#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */ +#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */ +#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */ +#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */ +#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */ +#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */ +#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */ +#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */ +#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */ +#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */ +#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */ +#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */ +#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */ +#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */ +#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */ +#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */ + +#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */ +#define SDREFCNT_PERI 0x00000fff /* refresh period */ + +#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_BUSCTL_REGS_H */ diff --git a/arch/mn10300/include/asm/byteorder.h b/arch/mn10300/include/asm/byteorder.h new file mode 100644 index 0000000..5dd0bdd --- /dev/null +++ b/arch/mn10300/include/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _ASM_BYTEORDER_H +#define _ASM_BYTEORDER_H + +#include + +#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h new file mode 100644 index 0000000..9e01122 --- /dev/null +++ b/arch/mn10300/include/asm/cache.h @@ -0,0 +1,54 @@ +/* MN10300 cache management registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_CACHE_H +#define _ASM_CACHE_H + +#include +#include + +#ifndef __ASSEMBLY__ +#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES) +#else +#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES +#endif + +/* data cache purge registers + * - read from the register to unconditionally purge that cache line + * - write address & 0xffffff00 to conditionally purge that cache line + * - clear LSB to request invalidation as well + */ +#define DCACHE_PURGE(WAY, ENTRY) \ + __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES, u32) + +#define DCACHE_PURGE_WAY0(ENTRY) \ + __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) +#define DCACHE_PURGE_WAY1(ENTRY) \ + __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) +#define DCACHE_PURGE_WAY2(ENTRY) \ + __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) +#define DCACHE_PURGE_WAY3(ENTRY) \ + __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) + +/* instruction cache access registers */ +#define ICACHE_DATA(WAY, ENTRY, OFF) \ + __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) +#define ICACHE_TAG(WAY, ENTRY) \ + __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + +/* instruction cache access registers */ +#define DCACHE_DATA(WAY, ENTRY, OFF) \ + __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) +#define DCACHE_TAG(WAY, ENTRY) \ + __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + +#endif /* _ASM_CACHE_H */ diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h new file mode 100644 index 0000000..2db746a --- /dev/null +++ b/arch/mn10300/include/asm/cacheflush.h @@ -0,0 +1,116 @@ +/* MN10300 Cache flushing + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_CACHEFLUSH_H +#define _ASM_CACHEFLUSH_H + +#ifndef __ASSEMBLY__ + +/* Keep includes the same across arches. */ +#include + +/* + * virtually-indexed cache managment (our cache is physically indexed) + */ +#define flush_cache_all() do {} while (0) +#define flush_cache_mm(mm) do {} while (0) +#define flush_cache_dup_mm(mm) do {} while (0) +#define flush_cache_range(mm, start, end) do {} while (0) +#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) +#define flush_cache_vmap(start, end) do {} while (0) +#define flush_cache_vunmap(start, end) do {} while (0) +#define flush_dcache_page(page) do {} while (0) +#define flush_dcache_mmap_lock(mapping) do {} while (0) +#define flush_dcache_mmap_unlock(mapping) do {} while (0) + +/* + * physically-indexed cache managment + */ +#ifndef CONFIG_MN10300_CACHE_DISABLED + +extern void flush_icache_range(unsigned long start, unsigned long end); +extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); + +#else + +#define flush_icache_range(start, end) do {} while (0) +#define flush_icache_page(vma, pg) do {} while (0) + +#endif + +#define flush_icache_user_range(vma, pg, adr, len) \ + flush_icache_range(adr, adr + len) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_icache_page(vma, page); \ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +/* + * primitive routines + */ +#ifndef CONFIG_MN10300_CACHE_DISABLED +extern void mn10300_icache_inv(void); +extern void mn10300_dcache_inv(void); +extern void mn10300_dcache_inv_page(unsigned start); +extern void mn10300_dcache_inv_range(unsigned start, unsigned end); +extern void mn10300_dcache_inv_range2(unsigned start, unsigned size); +#ifdef CONFIG_MN10300_CACHE_WBACK +extern void mn10300_dcache_flush(void); +extern void mn10300_dcache_flush_page(unsigned start); +extern void mn10300_dcache_flush_range(unsigned start, unsigned end); +extern void mn10300_dcache_flush_range2(unsigned start, unsigned size); +extern void mn10300_dcache_flush_inv(void); +extern void mn10300_dcache_flush_inv_page(unsigned start); +extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end); +extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); +#else +#define mn10300_dcache_flush() do {} while (0) +#define mn10300_dcache_flush_page(start) do {} while (0) +#define mn10300_dcache_flush_range(start, end) do {} while (0) +#define mn10300_dcache_flush_range2(start, size) do {} while (0) +#define mn10300_dcache_flush_inv() mn10300_dcache_inv() +#define mn10300_dcache_flush_inv_page(start) \ + mn10300_dcache_inv_page((start)) +#define mn10300_dcache_flush_inv_range(start, end) \ + mn10300_dcache_inv_range((start), (end)) +#define mn10300_dcache_flush_inv_range2(start, size) \ + mn10300_dcache_inv_range2((start), (size)) +#endif /* CONFIG_MN10300_CACHE_WBACK */ +#else +#define mn10300_icache_inv() do {} while (0) +#define mn10300_dcache_inv() do {} while (0) +#define mn10300_dcache_inv_page(start) do {} while (0) +#define mn10300_dcache_inv_range(start, end) do {} while (0) +#define mn10300_dcache_inv_range2(start, size) do {} while (0) +#define mn10300_dcache_flush() do {} while (0) +#define mn10300_dcache_flush_inv_page(start) do {} while (0) +#define mn10300_dcache_flush_inv() do {} while (0) +#define mn10300_dcache_flush_inv_range(start, end) do {} while (0) +#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0) +#define mn10300_dcache_flush_page(start) do {} while (0) +#define mn10300_dcache_flush_range(start, end) do {} while (0) +#define mn10300_dcache_flush_range2(start, size) do {} while (0) +#endif /* CONFIG_MN10300_CACHE_DISABLED */ + +/* + * internal debugging function + */ +#ifdef CONFIG_DEBUG_PAGEALLOC +extern void kernel_map_pages(struct page *page, int numpages, int enable); +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_CACHEFLUSH_H */ diff --git a/arch/mn10300/include/asm/checksum.h b/arch/mn10300/include/asm/checksum.h new file mode 100644 index 0000000..9fb2a8d --- /dev/null +++ b/arch/mn10300/include/asm/checksum.h @@ -0,0 +1,86 @@ +/* MN10300 Optimised checksumming code + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_CHECKSUM_H +#define _ASM_CHECKSUM_H + +extern __wsum csum_partial(const void *buff, int len, __wsum sum); +extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); +extern __wsum csum_partial_copy_from_user(const void *src, void *dst, + int len, __wsum sum, + int *err_ptr); +extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); +extern __wsum csum_partial(const void *buff, int len, __wsum sum); +extern __sum16 ip_compute_csum(const void *buff, int len); + +#define csum_partial_copy_fromuser csum_partial_copy +extern __wsum csum_partial_copy(const void *src, void *dst, int len, + __wsum sum); + +static inline __sum16 csum_fold(__wsum sum) +{ + asm( + " add %1,%0 \n" + " addc 0xffff,%0 \n" + : "=r" (sum) + : "r" (sum << 16), "0" (sum & 0xffff0000) + : "cc" + ); + return (~sum) >> 16; +} + +static inline __wsum csum_tcpudp_nofold(unsigned long saddr, + unsigned long daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + __wsum tmp; + + tmp = (__wsum) ntohs(len) << 16; + tmp += (__wsum) proto << 8; + + asm( + " add %1,%0 \n" + " addc %2,%0 \n" + " addc %3,%0 \n" + " addc 0,%0 \n" + : "=r" (sum) + : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum) + : "cc" + ); + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(unsigned long saddr, + unsigned long daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +#undef _HAVE_ARCH_IPV6_CSUM + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len, + __wsum sum, int *err_ptr); + + +#endif /* _ASM_CHECKSUM_H */ diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h new file mode 100644 index 0000000..757e9b5 --- /dev/null +++ b/arch/mn10300/include/asm/cpu-regs.h @@ -0,0 +1,290 @@ +/* MN10300 Core system registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_CPU_REGS_H +#define _ASM_CPU_REGS_H + +#ifndef __ASSEMBLY__ +#include +#endif + +#ifdef CONFIG_MN10300_CPU_AM33V2 +/* we tell the compiler to pretend to be AM33 so that it doesn't try and use + * the FP regs, but tell the assembler that we're actually allowed AM33v2 + * instructions */ +#ifndef __ASSEMBLY__ +asm(" .am33_2\n"); +#else +.am33_2 +#endif +#endif + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR)) +#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR)) +#else +#define __SYSREG(ADDR, TYPE) ADDR +#define __SYSREGC(ADDR, TYPE) ADDR +#endif + +/* CPU registers */ +#define EPSW_FLAG_Z 0x00000001 /* zero flag */ +#define EPSW_FLAG_N 0x00000002 /* negative flag */ +#define EPSW_FLAG_C 0x00000004 /* carry flag */ +#define EPSW_FLAG_V 0x00000008 /* overflow flag */ +#define EPSW_IM 0x00000700 /* interrupt mode */ +#define EPSW_IM_0 0x00000000 /* interrupt mode 0 */ +#define EPSW_IM_1 0x00000100 /* interrupt mode 1 */ +#define EPSW_IM_2 0x00000200 /* interrupt mode 2 */ +#define EPSW_IM_3 0x00000300 /* interrupt mode 3 */ +#define EPSW_IM_4 0x00000400 /* interrupt mode 4 */ +#define EPSW_IM_5 0x00000500 /* interrupt mode 5 */ +#define EPSW_IM_6 0x00000600 /* interrupt mode 6 */ +#define EPSW_IM_7 0x00000700 /* interrupt mode 7 */ +#define EPSW_IE 0x00000800 /* interrupt enable */ +#define EPSW_S 0x00003000 /* software auxilliary bits */ +#define EPSW_T 0x00008000 /* trace enable */ +#define EPSW_nSL 0x00010000 /* not supervisor level */ +#define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */ +#define EPSW_nAR 0x00040000 /* register bank control */ +#define EPSW_ML 0x00080000 /* monitor level */ +#define EPSW_FE 0x00100000 /* FPU enable */ + +/* FPU registers */ +#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */ +#define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */ +#define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */ +#define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */ +#define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */ +#define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */ +#define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */ +#define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */ +#define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */ +#define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */ +#define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */ +#define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */ +#define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */ +#define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */ +#define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */ +#define FPCR_RM 0x00030000 /* rounding mode */ +#define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */ +#define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */ +#define FPCR_FCC_E 0x00080000 /* FPU equal condition code */ +#define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */ +#define FPCR_FCC_L 0x00200000 /* FPU less than condition code */ +#define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */ + +/* CPU control registers */ +#define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */ +#define CPUP_DWBD 0x0020 /* write buffer disable flag */ +#define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */ +#define CPUP_EXM 0x0080 /* exception operation mode */ +#define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */ +#define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */ + +#define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */ +#define CPUM_SLEEP 0x0004 /* set to enter sleep state */ +#define CPUM_HALT 0x0008 /* set to enter halt state */ +#define CPUM_STOP 0x0010 /* set to enter stop state */ + +#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */ +#define CPUREV_TYPE 0x0000000f /* CPU type */ +#define CPUREV_TYPE_S 0 +#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */ +#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */ +#define CPUREV_REVISION 0x000000f0 /* CPU revision */ +#define CPUREV_REVISION_S 4 +#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */ +#define CPUREV_ICWAY_S 8 +#define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */ +#define CPUREV_ICSIZE_S 12 +#define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */ +#define CPUREV_DCWAY_S 16 +#define CPUREV_DCSIZE 0x00f00000 /* data cache way size */ +#define CPUREV_DCSIZE_S 20 +#define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */ +#define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */ +#define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */ + +#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */ + +/* interrupt/exception control registers */ +#define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */ +#define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */ +#define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */ +#define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */ +#define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */ +#define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */ +#define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */ + +#define TBR __SYSREG(0xc0000024, u32) /* Trap table base */ +#define TBR_TB 0xff000000 /* table base address bits 31-24 */ +#define TBR_INT_CODE 0x00ffffff /* interrupt code */ + +#define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */ + +#define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */ +#define sISR_IRQICE 0x00000001 /* ICE interrupt */ +#define sISR_ISTEP 0x00000002 /* single step interrupt */ +#define sISR_MISSA 0x00000004 /* memory access address misalignment fault */ +#define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */ +#define sISR_PIEXE 0x00000010 /* program interrupt */ +#define sISR_MEMERR 0x00000020 /* illegal memory access fault */ +#define sISR_IBREAK 0x00000040 /* instraction break interrupt */ +#define sISR_DBSRL 0x00000080 /* debug serial interrupt */ +#define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */ +#define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */ +#define sISR_OBREAK 0x00000400 /* operand break interrupt */ +#define sISR_PRIV 0x00000800 /* privileged instruction execution fault */ +#define sISR_BUSERR 0x00001000 /* bus error fault */ +#define sISR_DBLFT 0x00002000 /* double fault */ +#define sISR_DBG 0x00008000 /* debug reserved interrupt */ +#define sISR_ITMISS 0x00010000 /* instruction TLB miss */ +#define sISR_DTMISS 0x00020000 /* data TLB miss */ +#define sISR_ITEX 0x00040000 /* instruction TLB access exception */ +#define sISR_DTEX 0x00080000 /* data TLB access exception */ +#define sISR_ILGIA 0x00100000 /* illegal instruction access exception */ +#define sISR_ILGDA 0x00200000 /* illegal data access exception */ +#define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */ +#define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */ +#define sISR_PRIDA 0x01000000 /* privileged space data access excep */ +#define sISR_DISA 0x02000000 /* data space instruction access excep */ +#define sISR_SYSC 0x04000000 /* system call instruction excep */ +#define sISR_FPUD 0x08000000 /* FPU disabled excep */ +#define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */ +#define sISR_FPUOP 0x20000000 /* FPU operation excep */ +#define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */ + +/* cache control registers */ +#define CHCTR __SYSREG(0xc0000070, u16) /* cache control */ +#define CHCTR_ICEN 0x0001 /* instruction cache enable */ +#define CHCTR_DCEN 0x0002 /* data cache enable */ +#define CHCTR_ICBUSY 0x0004 /* instruction cache busy */ +#define CHCTR_DCBUSY 0x0008 /* data cache busy */ +#define CHCTR_ICINV 0x0010 /* instruction cache invalidate */ +#define CHCTR_DCINV 0x0020 /* data cache invalidate */ +#define CHCTR_DCWTMD 0x0040 /* data cache writing mode */ +#define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */ +#define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */ +#define CHCTR_DCALMD 0x0080 /* data cache allocation mode */ +#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */ +#define CHCTR_DCWMD 0xf000 /* data cache way mode */ + +/* MMU control registers */ +#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */ +#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */ +#define MMUCTR_ITE 0x00000040 /* instruction TLB enable */ +#define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */ +#define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */ +#define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */ +#define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */ +#define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */ +#define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */ +#define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */ +#define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */ +#define MMUCTR_CE 0x00008000 /* cacheable bit enable */ +#define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */ +#define MMUCTR_DTE 0x00400000 /* data TLB enable */ +#define MMUCTR_DIV 0x00800000 /* data TLB invalidate */ +#define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */ +#define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */ +#define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */ +#define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */ +#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */ +#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */ +#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */ + +#define PIDR __SYSREG(0xc0000094, u16) /* PID register */ +#define PIDR_PID 0x00ff /* process identifier */ + +#define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */ + +#define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */ +#define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */ +#define xPTEL_V 0x00000001 /* TLB entry valid */ +#define xPTEL_UNUSED1 0x00000002 /* unused bit */ +#define xPTEL_UNUSED2 0x00000004 /* unused bit */ +#define xPTEL_C 0x00000008 /* cached if set */ +#define xPTEL_PV 0x00000010 /* page valid */ +#define xPTEL_D 0x00000020 /* dirty */ +#define xPTEL_PR 0x000001c0 /* page protection */ +#define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */ +#define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */ +#define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */ +#define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */ +#define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */ +#define xPTEL_G 0x00000200 /* global (use PID if 0) */ +#define xPTEL_PS 0x00000c00 /* page size */ +#define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */ +#define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */ +#define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */ +#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */ +#define xPTEL_PPN 0xfffff006 /* physical page number */ + +#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */ +#define xPTEL_UNUSED1_BIT 1 +#define xPTEL_UNUSED2_BIT 2 +#define xPTEL_C_BIT 3 +#define xPTEL_PV_BIT 4 +#define xPTEL_D_BIT 5 +#define xPTEL_G_BIT 9 + +#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */ +#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */ +#define xPTEU_VPN 0xfffffc00 /* virtual page number */ +#define xPTEU_PID 0x000000ff /* process identifier to which applicable */ + +#define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */ +#define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */ +#define xPTEL2_V 0x00000001 /* TLB entry valid */ +#define xPTEL2_C 0x00000002 /* cacheable */ +#define xPTEL2_PV 0x00000004 /* page valid */ +#define xPTEL2_D 0x00000008 /* dirty */ +#define xPTEL2_PR 0x00000070 /* page protection */ +#define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */ +#define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */ +#define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */ +#define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */ +#define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */ +#define xPTEL2_G 0x00000080 /* global (use PID if 0) */ +#define xPTEL2_PS 0x00000300 /* page size */ +#define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */ +#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */ +#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */ +#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */ +#define xPTEL2_PPN 0xfffffc00 /* physical page number */ + +#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */ +#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */ +#define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */ +#define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */ +#define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */ +#define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */ +#define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */ +#define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */ +#define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */ +#define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */ +#define MMUFCR_xFC_TYPE 0x0020 /* access type flag */ +#define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */ +#define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */ +#define MMUFCR_xFC_PR 0x01c0 /* page protection flag */ +#define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */ +#define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */ +#define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */ +#define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */ +#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */ +#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_CPU_REGS_H */ diff --git a/arch/mn10300/include/asm/cputime.h b/arch/mn10300/include/asm/cputime.h new file mode 100644 index 0000000..6d68ad7 --- /dev/null +++ b/arch/mn10300/include/asm/cputime.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/current.h b/arch/mn10300/include/asm/current.h new file mode 100644 index 0000000..ca6027d --- /dev/null +++ b/arch/mn10300/include/asm/current.h @@ -0,0 +1,37 @@ +/* MN10300 Current task structure accessor + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_CURRENT_H +#define _ASM_CURRENT_H + +#include + +/* + * dedicate E2 to keeping the current task pointer + */ +#ifdef CONFIG_MN10300_CURRENT_IN_E2 + +register struct task_struct *const current asm("e2") __attribute__((used)); + +#define get_current() current + +extern struct task_struct *__current; + +#else +static inline __attribute__((const)) +struct task_struct *get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() +#endif + +#endif /* _ASM_CURRENT_H */ diff --git a/arch/mn10300/include/asm/delay.h b/arch/mn10300/include/asm/delay.h new file mode 100644 index 0000000..34517b3 --- /dev/null +++ b/arch/mn10300/include/asm/delay.h @@ -0,0 +1,19 @@ +/* MN10300 Uninterruptible delay routines + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DELAY_H +#define _ASM_DELAY_H + +extern void __udelay(unsigned long usecs); +extern void __delay(unsigned long loops); + +#define udelay(n) __udelay(n) + +#endif /* _ASM_DELAY_H */ diff --git a/arch/mn10300/include/asm/device.h b/arch/mn10300/include/asm/device.h new file mode 100644 index 0000000..f0a4c25 --- /dev/null +++ b/arch/mn10300/include/asm/device.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h new file mode 100644 index 0000000..3a8329b --- /dev/null +++ b/arch/mn10300/include/asm/div64.h @@ -0,0 +1,100 @@ +/* MN10300 64-bit division + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DIV64 +#define _ASM_DIV64 + +#include + +extern void ____unhandled_size_in_do_div___(void); + +/* + * divide n by base, leaving the result in n and returning the remainder + * - we can do this quite efficiently on the MN10300 by cascading the divides + * through the MDR register + */ +#define do_div(n, base) \ +({ \ + unsigned __rem = 0; \ + if (sizeof(n) <= 4) { \ + asm("mov %1,mdr \n" \ + "divu %2,%0 \n" \ + "mov mdr,%1 \n" \ + : "+r"(n), "=d"(__rem) \ + : "r"(base), "1"(__rem) \ + : "cc" \ + ); \ + } else if (sizeof(n) <= 8) { \ + union { \ + unsigned long long l; \ + u32 w[2]; \ + } __quot; \ + __quot.l = n; \ + asm("mov %0,mdr \n" /* MDR = 0 */ \ + "divu %3,%1 \n" \ + /* __quot.MSL = __div.MSL / base, */ \ + /* MDR = MDR:__div.MSL % base */ \ + "divu %3,%2 \n" \ + /* __quot.LSL = MDR:__div.LSL / base, */ \ + /* MDR = MDR:__div.LSL % base */ \ + "mov mdr,%0 \n" \ + : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \ + : "r"(base), "0"(__rem), "1"(__quot.w[1]), \ + "2"(__quot.w[0]) \ + : "cc" \ + ); \ + n = __quot.l; \ + } else { \ + ____unhandled_size_in_do_div___(); \ + } \ + __rem; \ +}) + +/* + * do an unsigned 32-bit multiply and divide with intermediate 64-bit product + * so as not to lose accuracy + * - we use the MDR register to hold the MSW of the product + */ +static inline __attribute__((const)) +unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div) +{ + unsigned result; + + asm("mulu %2,%0 \n" /* MDR:val = val*mult */ + "divu %3,%0 \n" /* val = MDR:val/div; + * MDR = MDR:val%div */ + : "=r"(result) + : "0"(val), "ir"(mult), "r"(div) + ); + + return result; +} + +/* + * do a signed 32-bit multiply and divide with intermediate 64-bit product so + * as not to lose accuracy + * - we use the MDR register to hold the MSW of the product + */ +static inline __attribute__((const)) +signed __muldiv64s(signed val, signed mult, signed div) +{ + signed result; + + asm("mul %2,%0 \n" /* MDR:val = val*mult */ + "div %3,%0 \n" /* val = MDR:val/div; + * MDR = MDR:val%div */ + : "=r"(result) + : "0"(val), "ir"(mult), "r"(div) + ); + + return result; +} + +#endif /* _ASM_DIV64 */ diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h new file mode 100644 index 0000000..ccae8f6 --- /dev/null +++ b/arch/mn10300/include/asm/dma-mapping.h @@ -0,0 +1,234 @@ +/* DMA mapping routines for the MN10300 arch + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DMA_MAPPING_H +#define _ASM_DMA_MAPPING_H + +#include +#include + +#include +#include + +extern void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, int flag); + +extern void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f)) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h)) + +/* + * Map a single buffer of the indicated size for DMA in streaming mode. The + * 32-bit bus address to use is returned. + * + * Once the device is given the dma address, the device owns this memory until + * either pci_unmap_single or pci_dma_sync_single is performed. + */ +static inline +dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + mn10300_dcache_flush_inv(); + return virt_to_bus(ptr); +} + +/* + * Unmap a single streaming mode DMA translation. The dma_addr and size must + * match what was provided for in a previous pci_map_single call. All other + * usages are undefined. + * + * After this call, reads by the cpu to the buffer are guarenteed to see + * whatever the device wrote there. + */ +static inline +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +/* + * Map a set of buffers described by scatterlist in streaming mode for DMA. + * This is the scather-gather version of the above pci_map_single interface. + * Here the scatter gather list elements are each tagged with the appropriate + * dma address and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of DMA + * address/length pairs than there are SG table elements. (for example + * via virtual mapping capabilities) The routine returns the number of + * addr/length pairs actually used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are the same + * here. + */ +static inline +int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + + BUG_ON(!valid_dma_direction(direction)); + WARN_ON(nents == 0 || sglist[0].length == 0); + + for_each_sg(sglist, sg, nents, i) { + BUG_ON(!sg_page(sg)); + + sg->dma_address = sg_phys(sg); + } + + mn10300_dcache_flush_inv(); + return nents; +} + +/* + * Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +static inline +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG_ON(!valid_dma_direction(direction)); +} + +/* + * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical + * to pci_map_single, but takes a struct page instead of a virtual address + */ +static inline +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + return page_to_bus(page) + offset; +} + +static inline +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +/* + * Make physical memory consistent for a single streaming mode DMA translation + * after a transfer. + * + * If you perform a pci_map_single() but wish to interrogate the buffer using + * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this + * function before doing so. At the next point you give the PCI dma address + * back to the card, the device again owns the buffer. + */ +static inline +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + mn10300_dcache_flush_inv(); +} + +static inline +void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + mn10300_dcache_flush_inv(); +} + + +/* + * Make physical memory consistent for a set of streaming mode DMA translations + * after a transfer. + * + * The same as pci_dma_sync_single but for a scatter-gather list, same rules + * and usage. + */ +static inline +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction) +{ + mn10300_dcache_flush_inv(); +} + +static inline +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +/* + * Return whether the given PCI device DMA address mask can be supported + * properly. For example, if your device can only drive the low 24-bits during + * PCI bus mastering, then you would pass 0x00ffffff as the mask to this + * function. + */ +static inline +int dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, so we can't + * guarantee allocations that must be within a tighter range than + * GFP_DMA + */ + if (mask < 0x00ffffff) + return 0; + return 1; +} + +static inline +int dma_set_mask(struct device *dev, u64 mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + return 0; +} + +static inline +int dma_get_cache_alignment(void) +{ + return 1 << L1_CACHE_SHIFT; +} + +#define dma_is_consistent(d) (1) + +static inline +void dma_cache_sync(void *vaddr, size_t size, + enum dma_data_direction direction) +{ + mn10300_dcache_flush_inv(); +} + +#endif diff --git a/arch/mn10300/include/asm/dma.h b/arch/mn10300/include/asm/dma.h new file mode 100644 index 0000000..098df2e --- /dev/null +++ b/arch/mn10300/include/asm/dma.h @@ -0,0 +1,118 @@ +/* MN10300 ISA DMA handlers and definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +#include +#include +#include +#include + +#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */ +#define MAX_DMA_ADDRESS 0xbfffffff + +extern spinlock_t dma_spin_lock; + +static inline unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static inline void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static inline void enable_dma(unsigned int dmanr) +{ +} + +static inline void disable_dma(unsigned int dmanr) +{ +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while holding the DMA lock ! --- + */ +static inline void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static inline void set_dma_mode(unsigned int dmanr, char mode) +{ +} + +/* Set only the page register bits of the transfer address. + * This is used for successive transfers when we know the contents of + * the lower 16 bits of the DMA current address register, but a 64k boundary + * may have been crossed. + */ +static inline void set_dma_page(unsigned int dmanr, char pagenr) +{ +} + + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static inline void set_dma_addr(unsigned int dmanr, unsigned int a) +{ +} + + +/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static inline void set_dma_count(unsigned int dmanr, unsigned int count) +{ +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static inline int get_dma_residue(unsigned int dmanr) +{ + return 0; +} + + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char *device_id); +extern void free_dma(unsigned int dmanr); + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ASM_DMA_H */ diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h new file mode 100644 index 0000000..58a199d --- /dev/null +++ b/arch/mn10300/include/asm/dmactl-regs.h @@ -0,0 +1,101 @@ +/* MN10300 on-board DMA controller registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DMACTL_REGS_H +#define _ASM_DMACTL_REGS_H + +#include + +#ifdef __KERNEL__ + +/* DMA registers */ +#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ +#define DMxCTR_BG 0x0000001f /* transfer request source */ +#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ +#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ +#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ +#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ +#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ +#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ +#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ +#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ +#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ +#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ +#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ +#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ +#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ +#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ +#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ +#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ +#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ +#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ +#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ +#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ +#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ +#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ +#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ +#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ +#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ +#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ +#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ +#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ +#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ +#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ +#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ +#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ +#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ +#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ +#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ +#define DMxCTR_RQM 0x00060000 /* external request input source mode */ +#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ +#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ +#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ +#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ +#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ +#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ + +#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ + +#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ + +#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ +#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ + +#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent + * size reg */ +#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ + +#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ +#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ +#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ +#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ + +#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ +#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ +#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ +#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ + +#ifndef __ASSEMBLY__ + +struct mn10300_dmactl_regs { + u32 ctr; + const void *src; + void *dst; + u32 siz; + u32 cyc; +} __attribute__((aligned(0x100))); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_DMACTL_REGS_H */ diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h new file mode 100644 index 0000000..bf09f8b --- /dev/null +++ b/arch/mn10300/include/asm/elf.h @@ -0,0 +1,147 @@ +/* MN10300 ELF constant and register definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_ELF_H +#define _ASM_ELF_H + +#include +#include +#include + +/* + * AM33 relocations + */ +#define R_MN10300_NONE 0 /* No reloc. */ +#define R_MN10300_32 1 /* Direct 32 bit. */ +#define R_MN10300_16 2 /* Direct 16 bit. */ +#define R_MN10300_8 3 /* Direct 8 bit. */ +#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */ +#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */ +#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */ +#define R_MN10300_24 9 /* Direct 24 bit. */ +#define R_MN10300_RELATIVE 23 /* Adjust by program base. */ + +/* + * ELF register definitions.. + */ +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +#define ELF_NFPREG 32 +typedef float elf_fpreg_t; + +typedef struct { + elf_fpreg_t fpregs[ELF_NFPREG]; + u_int32_t fpcr; +} elf_fpregset_t; + +extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); + +/* + * This is used to ensure we don't load something for the wrong architecture + */ +#define elf_check_arch(x) \ + (((x)->e_machine == EM_CYGNUS_MN10300) || \ + ((x)->e_machine == EM_MN10300)) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_MN10300 + +/* + * ELF process initialiser + */ +#define ELF_PLAT_INIT(_r, load_addr) \ +do { \ + struct pt_regs *_ur = current->thread.uregs; \ + _ur->a3 = 0; _ur->a2 = 0; _ur->d3 = 0; _ur->d2 = 0; \ + _ur->mcvf = 0; _ur->mcrl = 0; _ur->mcrh = 0; _ur->mdrq = 0; \ + _ur->e1 = 0; _ur->e0 = 0; _ur->e7 = 0; _ur->e6 = 0; \ + _ur->e5 = 0; _ur->e4 = 0; _ur->e3 = 0; _ur->e2 = 0; \ + _ur->lar = 0; _ur->lir = 0; _ur->mdr = 0; \ + _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \ +} while (0) + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +/* + * This is the location that an ET_DYN program is loaded if exec'ed. Typical + * use of this is to invoke "./ld.so someprog" to test out a new version of + * the loader. We need to make sure that it is out of the way of the program + * that it will "exec", and that there is sufficient room for the brk. + * - must clear the VMALLOC area + */ +#define ELF_ET_DYN_BASE 0x04000000 + +/* + * regs is struct pt_regs, pr_reg is elf_gregset_t (which is + * now struct user_regs, they are different) + * - ELF_CORE_COPY_REGS has been guessed, and may be wrong + */ +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ +do { \ + pr_reg[0] = regs->a3; \ + pr_reg[1] = regs->a2; \ + pr_reg[2] = regs->d3; \ + pr_reg[3] = regs->d2; \ + pr_reg[4] = regs->mcvf; \ + pr_reg[5] = regs->mcrl; \ + pr_reg[6] = regs->mcrh; \ + pr_reg[7] = regs->mdrq; \ + pr_reg[8] = regs->e1; \ + pr_reg[9] = regs->e0; \ + pr_reg[10] = regs->e7; \ + pr_reg[11] = regs->e6; \ + pr_reg[12] = regs->e5; \ + pr_reg[13] = regs->e4; \ + pr_reg[14] = regs->e3; \ + pr_reg[15] = regs->e2; \ + pr_reg[16] = regs->sp; \ + pr_reg[17] = regs->lar; \ + pr_reg[18] = regs->lir; \ + pr_reg[19] = regs->mdr; \ + pr_reg[20] = regs->a1; \ + pr_reg[21] = regs->a0; \ + pr_reg[22] = regs->d1; \ + pr_reg[23] = regs->d0; \ + pr_reg[24] = regs->orig_d0; \ + pr_reg[25] = regs->epsw; \ + pr_reg[26] = regs->pc; \ +} while (0); + +/* + * This yields a mask that user programs can use to figure out what + * instruction set this CPU supports. This could be done in user space, + * but it's not easy, and we've already done it here. + */ +#define ELF_HWCAP (0) + +/* + * This yields a string that ld.so will use to load implementation + * specific libraries for optimization. This is more specific in + * intent than poking at uname or /proc/cpuinfo. + * + * For the moment, we have only optimizations for the Intel generations, + * but that could change... + */ +#define ELF_PLATFORM (NULL) + +#ifdef __KERNEL__ +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) +#endif + +#endif /* _ASM_ELF_H */ diff --git a/arch/mn10300/include/asm/emergency-restart.h b/arch/mn10300/include/asm/emergency-restart.h new file mode 100644 index 0000000..3711bd9 --- /dev/null +++ b/arch/mn10300/include/asm/emergency-restart.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/errno.h b/arch/mn10300/include/asm/errno.h new file mode 100644 index 0000000..4c82b50 --- /dev/null +++ b/arch/mn10300/include/asm/errno.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h new file mode 100644 index 0000000..fa16466 --- /dev/null +++ b/arch/mn10300/include/asm/exceptions.h @@ -0,0 +1,121 @@ +/* MN10300 Microcontroller core exceptions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_EXCEPTIONS_H +#define _ASM_EXCEPTIONS_H + +#include + +/* + * define the breakpoint instruction opcode to use + * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can + * (can use 0xF7) + */ +#define GDBSTUB_BKPT 0xFF + +#ifndef __ASSEMBLY__ + +/* + * enumeration of exception codes (as extracted from TBR MSW) + */ +enum exception_code { + EXCEP_RESET = 0x000000, /* reset */ + + /* MMU exceptions */ + EXCEP_ITLBMISS = 0x000100, /* instruction TLB miss */ + EXCEP_DTLBMISS = 0x000108, /* data TLB miss */ + EXCEP_IAERROR = 0x000110, /* instruction address */ + EXCEP_DAERROR = 0x000118, /* data address */ + + /* system exceptions */ + EXCEP_TRAP = 0x000128, /* program interrupt (PI instruction) */ + EXCEP_ISTEP = 0x000130, /* single step */ + EXCEP_IBREAK = 0x000150, /* instruction breakpoint */ + EXCEP_OBREAK = 0x000158, /* operand breakpoint */ + EXCEP_PRIVINS = 0x000160, /* privileged instruction execution */ + EXCEP_UNIMPINS = 0x000168, /* unimplemented instruction execution */ + EXCEP_UNIMPEXINS = 0x000170, /* unimplemented extended instruction execution */ + EXCEP_MEMERR = 0x000178, /* illegal memory access */ + EXCEP_MISALIGN = 0x000180, /* misalignment */ + EXCEP_BUSERROR = 0x000188, /* bus error */ + EXCEP_ILLINSACC = 0x000190, /* illegal instruction access */ + EXCEP_ILLDATACC = 0x000198, /* illegal data access */ + EXCEP_IOINSACC = 0x0001a0, /* I/O space instruction access */ + EXCEP_PRIVINSACC = 0x0001a8, /* privileged space instruction access */ + EXCEP_PRIVDATACC = 0x0001b0, /* privileged space data access */ + EXCEP_DATINSACC = 0x0001b8, /* data space instruction access */ + EXCEP_DOUBLE_FAULT = 0x000200, /* double fault */ + + /* FPU exceptions */ + EXCEP_FPU_DISABLED = 0x0001c0, /* FPU disabled */ + EXCEP_FPU_UNIMPINS = 0x0001c8, /* FPU unimplemented operation */ + EXCEP_FPU_OPERATION = 0x0001d0, /* FPU operation */ + + /* interrupts */ + EXCEP_WDT = 0x000240, /* watchdog timer overflow */ + EXCEP_NMI = 0x000248, /* non-maskable interrupt */ + EXCEP_IRQ_LEVEL0 = 0x000280, /* level 0 maskable interrupt */ + EXCEP_IRQ_LEVEL1 = 0x000288, /* level 1 maskable interrupt */ + EXCEP_IRQ_LEVEL2 = 0x000290, /* level 2 maskable interrupt */ + EXCEP_IRQ_LEVEL3 = 0x000298, /* level 3 maskable interrupt */ + EXCEP_IRQ_LEVEL4 = 0x0002a0, /* level 4 maskable interrupt */ + EXCEP_IRQ_LEVEL5 = 0x0002a8, /* level 5 maskable interrupt */ + EXCEP_IRQ_LEVEL6 = 0x0002b0, /* level 6 maskable interrupt */ + + /* system calls */ + EXCEP_SYSCALL0 = 0x000300, /* system call 0 */ + EXCEP_SYSCALL1 = 0x000308, /* system call 1 */ + EXCEP_SYSCALL2 = 0x000310, /* system call 2 */ + EXCEP_SYSCALL3 = 0x000318, /* system call 3 */ + EXCEP_SYSCALL4 = 0x000320, /* system call 4 */ + EXCEP_SYSCALL5 = 0x000328, /* system call 5 */ + EXCEP_SYSCALL6 = 0x000330, /* system call 6 */ + EXCEP_SYSCALL7 = 0x000338, /* system call 7 */ + EXCEP_SYSCALL8 = 0x000340, /* system call 8 */ + EXCEP_SYSCALL9 = 0x000348, /* system call 9 */ + EXCEP_SYSCALL10 = 0x000350, /* system call 10 */ + EXCEP_SYSCALL11 = 0x000358, /* system call 11 */ + EXCEP_SYSCALL12 = 0x000360, /* system call 12 */ + EXCEP_SYSCALL13 = 0x000368, /* system call 13 */ + EXCEP_SYSCALL14 = 0x000370, /* system call 14 */ + EXCEP_SYSCALL15 = 0x000378, /* system call 15 */ +}; + +extern void __set_intr_stub(enum exception_code code, void *handler); +extern void set_intr_stub(enum exception_code code, void *handler); +extern void set_jtag_stub(enum exception_code code, void *handler); + +struct pt_regs; + +extern asmlinkage void __common_exception(void); +extern asmlinkage void itlb_miss(void); +extern asmlinkage void dtlb_miss(void); +extern asmlinkage void itlb_aerror(void); +extern asmlinkage void dtlb_aerror(void); +extern asmlinkage void raw_bus_error(void); +extern asmlinkage void double_fault(void); +extern asmlinkage int system_call(struct pt_regs *); +extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); +extern asmlinkage void nmi(struct pt_regs *, enum exception_code); +extern asmlinkage void uninitialised_exception(struct pt_regs *, + enum exception_code); +extern asmlinkage void irq_handler(void); +extern asmlinkage void profile_handler(void); +extern asmlinkage void nmi_handler(void); +extern asmlinkage void misalignment(struct pt_regs *, enum exception_code); + +extern void die(const char *, struct pt_regs *, enum exception_code) + ATTRIB_NORET; + +extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code); + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_EXCEPTIONS_H */ diff --git a/arch/mn10300/include/asm/fb.h b/arch/mn10300/include/asm/fb.h new file mode 100644 index 0000000..697b24a --- /dev/null +++ b/arch/mn10300/include/asm/fb.h @@ -0,0 +1,23 @@ +/* MN10300 Frame buffer stuff + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_FB_H +#define _ASM_FB_H + +#include + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H */ diff --git a/arch/mn10300/include/asm/fcntl.h b/arch/mn10300/include/asm/fcntl.h new file mode 100644 index 0000000..46ab12d --- /dev/null +++ b/arch/mn10300/include/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h new file mode 100644 index 0000000..64a2b83 --- /dev/null +++ b/arch/mn10300/include/asm/fpu.h @@ -0,0 +1,85 @@ +/* MN10300 FPU definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_FPU_H +#define _ASM_FPU_H + +#include +#include +#include + +#ifdef __KERNEL__ + +/* the task that owns the FPU state */ +extern struct task_struct *fpu_state_owner; + +#define set_using_fpu(tsk) \ +do { \ + (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \ +} while (0) + +#define clear_using_fpu(tsk) \ +do { \ + (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \ +} while (0) + +#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) + +#define unlazy_fpu(tsk) \ +do { \ + preempt_disable(); \ + if (fpu_state_owner == (tsk)) \ + fpu_save(&tsk->thread.fpu_state); \ + preempt_enable(); \ +} while (0) + +#define exit_fpu() \ +do { \ + struct task_struct *__tsk = current; \ + preempt_disable(); \ + if (fpu_state_owner == __tsk) \ + fpu_state_owner = NULL; \ + preempt_enable(); \ +} while (0) + +#define flush_fpu() \ +do { \ + struct task_struct *__tsk = current; \ + preempt_disable(); \ + if (fpu_state_owner == __tsk) { \ + fpu_state_owner = NULL; \ + __tsk->thread.uregs->epsw &= ~EPSW_FE; \ + } \ + preempt_enable(); \ + clear_using_fpu(__tsk); \ +} while (0) + +extern asmlinkage void fpu_init_state(void); +extern asmlinkage void fpu_kill_state(struct task_struct *); +extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code); +extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); + +#ifdef CONFIG_FPU +extern asmlinkage void fpu_save(struct fpu_state_struct *); +extern asmlinkage void fpu_restore(struct fpu_state_struct *); +#else +#define fpu_save(a) +#define fpu_restore(a) +#endif /* CONFIG_FPU */ + +/* + * signal frame handlers + */ +extern int fpu_setup_sigcontext(struct fpucontext *buf); +extern int fpu_restore_sigcontext(struct fpucontext *buf); + +#endif /* __KERNEL__ */ +#endif /* _ASM_FPU_H */ diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc new file mode 100644 index 0000000..5b1949b --- /dev/null +++ b/arch/mn10300/include/asm/frame.inc @@ -0,0 +1,91 @@ +/* MN10300 Microcontroller core system register definitions -*- asm -*- + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_FRAME_INC +#define _ASM_FRAME_INC + +#ifndef __ASSEMBLY__ +#error not for use in C files +#endif + +#ifndef __ASM_OFFSETS_H__ +#include +#endif + +#define pi break + +#define fp a3 + +############################################################################### +# +# build a stack frame from the registers +# - the caller has subtracted 4 from SP before coming here +# +############################################################################### +.macro SAVE_ALL + add -4,sp # next exception frame ptr save area + movm [other],(sp) + mov usp,a1 + mov a1,(sp) # USP in MOVM[other] dummy slot + movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) + mov sp,fp # FRAME pointer in A3 + add -12,sp # allow for calls to be made + mov (__frame),a1 + mov a1,(REG_NEXT,fp) + mov fp,(__frame) + + and ~EPSW_FE,epsw # disable the FPU inside the kernel + + # we may be holding current in E2 +#ifdef CONFIG_MN10300_CURRENT_IN_E2 + mov (__current),e2 +#endif +.endm + +############################################################################### +# +# restore the registers from a stack frame +# +############################################################################### +.macro RESTORE_ALL + # peel back the stack to the calling frame + # - this permits execve() to discard extra frames due to kernel syscalls + mov (__frame),fp + mov fp,sp + mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 + mov d0,(__frame) + +#ifndef CONFIG_MN10300_USING_JTAG + mov (REG_EPSW,fp),d0 + btst EPSW_T,d0 + beq 99f + + or EPSW_NMID,epsw + movhu (DCR),d1 + or 0x0001, d1 + movhu d1,(DCR) + +99: +#endif + movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother] + + # must restore usp even if returning to kernel space, + # when CONFIG_PREEMPT is enabled. + mov (sp),a1 # USP in MOVM[other] dummy slot + mov a1,usp + + movm (sp),[other] + add 8,sp + rti + +.endm + + +#endif /* _ASM_FRAME_INC */ diff --git a/arch/mn10300/include/asm/ftrace.h b/arch/mn10300/include/asm/ftrace.h new file mode 100644 index 0000000..40a8c17 --- /dev/null +++ b/arch/mn10300/include/asm/ftrace.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/mn10300/include/asm/futex.h b/arch/mn10300/include/asm/futex.h new file mode 100644 index 0000000..0b74582 --- /dev/null +++ b/arch/mn10300/include/asm/futex.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h new file mode 100644 index 0000000..e5a6368 --- /dev/null +++ b/arch/mn10300/include/asm/gdb-stub.h @@ -0,0 +1,183 @@ +/* MN10300 Kernel GDB stub definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_GDB_STUB_H +#define _ASM_GDB_STUB_H + +#include + +/* + * register ID numbers in GDB remote protocol + */ + +#define GDB_REGID_PC 9 +#define GDB_REGID_FP 7 +#define GDB_REGID_SP 8 + +/* + * virtual stack layout for the GDB exception handler + */ +#define NUMREGS 64 + +#define GDB_FR_D0 (0 * 4) +#define GDB_FR_D1 (1 * 4) +#define GDB_FR_D2 (2 * 4) +#define GDB_FR_D3 (3 * 4) +#define GDB_FR_A0 (4 * 4) +#define GDB_FR_A1 (5 * 4) +#define GDB_FR_A2 (6 * 4) +#define GDB_FR_A3 (7 * 4) + +#define GDB_FR_SP (8 * 4) +#define GDB_FR_PC (9 * 4) +#define GDB_FR_MDR (10 * 4) +#define GDB_FR_EPSW (11 * 4) +#define GDB_FR_LIR (12 * 4) +#define GDB_FR_LAR (13 * 4) +#define GDB_FR_MDRQ (14 * 4) + +#define GDB_FR_E0 (15 * 4) +#define GDB_FR_E1 (16 * 4) +#define GDB_FR_E2 (17 * 4) +#define GDB_FR_E3 (18 * 4) +#define GDB_FR_E4 (19 * 4) +#define GDB_FR_E5 (20 * 4) +#define GDB_FR_E6 (21 * 4) +#define GDB_FR_E7 (22 * 4) + +#define GDB_FR_SSP (23 * 4) +#define GDB_FR_MSP (24 * 4) +#define GDB_FR_USP (25 * 4) +#define GDB_FR_MCRH (26 * 4) +#define GDB_FR_MCRL (27 * 4) +#define GDB_FR_MCVF (28 * 4) + +#define GDB_FR_FPCR (29 * 4) +#define GDB_FR_DUMMY0 (30 * 4) +#define GDB_FR_DUMMY1 (31 * 4) + +#define GDB_FR_FS0 (32 * 4) + +#define GDB_FR_SIZE (NUMREGS * 4) + +#ifndef __ASSEMBLY__ + +/* + * This is the same as above, but for the high-level + * part of the GDB stub. + */ + +struct gdb_regs { + /* saved main processor registers */ + u32 d0, d1, d2, d3, a0, a1, a2, a3; + u32 sp, pc, mdr, epsw, lir, lar, mdrq; + u32 e0, e1, e2, e3, e4, e5, e6, e7; + u32 ssp, msp, usp, mcrh, mcrl, mcvf; + + /* saved floating point registers */ + u32 fpcr, _dummy0, _dummy1; + u32 fs0, fs1, fs2, fs3, fs4, fs5, fs6, fs7; + u32 fs8, fs9, fs10, fs11, fs12, fs13, fs14, fs15; + u32 fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23; + u32 fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31; +}; + +/* + * Prototypes + */ +extern void show_registers_only(struct pt_regs *regs); + +extern asmlinkage void gdbstub_init(void); +extern asmlinkage void gdbstub_exit(int status); +extern asmlinkage void gdbstub_io_init(void); +extern asmlinkage void gdbstub_io_set_baud(unsigned baud); +extern asmlinkage int gdbstub_io_rx_char(unsigned char *_ch, int nonblock); +extern asmlinkage void gdbstub_io_tx_char(unsigned char ch); +extern asmlinkage void gdbstub_io_tx_flush(void); + +extern asmlinkage void gdbstub_io_rx_handler(void); +extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code); +extern asmlinkage int gdbstub_intercept(struct pt_regs *, enum exception_code); +extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code); +extern asmlinkage void __gdbstub_bug_trap(void); +extern asmlinkage void __gdbstub_pause(void); +extern asmlinkage void start_kernel(void); + +#ifndef CONFIG_MN10300_CACHE_DISABLED +extern asmlinkage void gdbstub_purge_cache(void); +#else +#define gdbstub_purge_cache() do {} while (0) +#endif + +/* Used to prevent crashes in memory access */ +extern asmlinkage int gdbstub_read_byte(const u8 *, u8 *); +extern asmlinkage int gdbstub_read_word(const u8 *, u8 *); +extern asmlinkage int gdbstub_read_dword(const u8 *, u8 *); +extern asmlinkage int gdbstub_write_byte(u32, u8 *); +extern asmlinkage int gdbstub_write_word(u32, u8 *); +extern asmlinkage int gdbstub_write_dword(u32, u8 *); + +extern asmlinkage void gdbstub_read_byte_guard(void); +extern asmlinkage void gdbstub_read_byte_cont(void); +extern asmlinkage void gdbstub_read_word_guard(void); +extern asmlinkage void gdbstub_read_word_cont(void); +extern asmlinkage void gdbstub_read_dword_guard(void); +extern asmlinkage void gdbstub_read_dword_cont(void); +extern asmlinkage void gdbstub_write_byte_guard(void); +extern asmlinkage void gdbstub_write_byte_cont(void); +extern asmlinkage void gdbstub_write_word_guard(void); +extern asmlinkage void gdbstub_write_word_cont(void); +extern asmlinkage void gdbstub_write_dword_guard(void); +extern asmlinkage void gdbstub_write_dword_cont(void); + +extern u8 gdbstub_rx_buffer[PAGE_SIZE]; +extern u32 gdbstub_rx_inp; +extern u32 gdbstub_rx_outp; +extern u8 gdbstub_rx_overflow; +extern u8 gdbstub_busy; +extern u8 gdbstub_rx_unget; + +#ifdef CONFIG_GDBSTUB_DEBUGGING +extern void gdbstub_printk(const char *fmt, ...) + __attribute__((format(printf, 1, 2))); +#else +static inline __attribute__((format(printf, 1, 2))) +void gdbstub_printk(const char *fmt, ...) +{ +} +#endif + +#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY +#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) +#else +#define gdbstub_entry(FMT, ...) ({ 0; }) +#endif + +#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL +#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) +#else +#define gdbstub_proto(FMT, ...) ({ 0; }) +#endif + +#ifdef CONFIG_GDBSTUB_DEBUG_IO +#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) +#else +#define gdbstub_io(FMT, ...) ({ 0; }) +#endif + +#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT +#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) +#else +#define gdbstub_bkpt(FMT, ...) ({ 0; }) +#endif + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_GDB_STUB_H */ diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h new file mode 100644 index 0000000..54d9501 --- /dev/null +++ b/arch/mn10300/include/asm/hardirq.h @@ -0,0 +1,48 @@ +/* MN10300 Hardware IRQ statistics and management + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Modified by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_HARDIRQ_H +#define _ASM_HARDIRQ_H + +#include +#include +#include + +/* assembly code in softirq.h is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; + unsigned long idle_timestamp; + unsigned int __nmi_count; /* arch dependent */ + unsigned int __irq_count; /* arch dependent */ +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(int irq); + +/* + * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table + * - these should jump to __common_exception in entry.S unless there's a good + * reason to do otherwise (see trap_preinit() in traps.c) + */ +typedef void (*intr_stub_fnx)(struct pt_regs *regs, + enum exception_code intcode); + +/* + * manipulate pointers in the Exception table (see entry.S) + * - these are indexed by decoding the lower 24 bits of the TBR register + * - note that the MN103E010 doesn't always trap through the correct vector, + * but does always set the TBR correctly + */ +extern asmlinkage void set_excp_vector(enum exception_code code, + intr_stub_fnx handler); + +#endif /* _ASM_HARDIRQ_H */ diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h new file mode 100644 index 0000000..90f2abb --- /dev/null +++ b/arch/mn10300/include/asm/highmem.h @@ -0,0 +1,116 @@ +/* MN10300 Virtual kernel memory mappings for high memory + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-i386/highmem.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +/* undef for production */ +#undef HIGHMEM_DEBUG + +/* declarations for highmem.c */ +extern unsigned long highstart_pfn, highend_pfn; + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +extern void __init kmap_init(void); + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define PKMAP_BASE 0xfe000000UL +#define LAST_PKMAP 1024 +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern unsigned long kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +static inline unsigned long kmap(struct page *page) +{ + if (in_interrupt()) + BUG(); + if (page < highmem_start_page) + return page_address(page); + return kmap_high(page); +} + +static inline void kunmap(struct page *page) +{ + if (in_interrupt()) + BUG(); + if (page < highmem_start_page) + return; + kunmap_high(page); +} + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +static inline unsigned long kmap_atomic(struct page *page, enum km_type type) +{ + enum fixed_addresses idx; + unsigned long vaddr; + + if (page < highmem_start_page) + return page_address(page); + + debug_kmap_atomic(type); + idx = type + KM_TYPE_NR * smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); +#if HIGHMEM_DEBUG + if (!pte_none(*(kmap_pte - idx))) + BUG(); +#endif + set_pte(kmap_pte - idx, mk_pte(page, kmap_prot)); + __flush_tlb_one(vaddr); + + return vaddr; +} + +static inline void kunmap_atomic(unsigned long vaddr, enum km_type type) +{ +#if HIGHMEM_DEBUG + enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id(); + + if (vaddr < FIXADDR_START) /* FIXME */ + return; + + if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)) + BUG(); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(kmap_pte - idx); + __flush_tlb_one(vaddr); +#endif +} + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/mn10300/include/asm/hw_irq.h b/arch/mn10300/include/asm/hw_irq.h new file mode 100644 index 0000000..7061990 --- /dev/null +++ b/arch/mn10300/include/asm/hw_irq.h @@ -0,0 +1,14 @@ +/* MN10300 Hardware interrupt definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_HW_IRQ_H +#define _ASM_HW_IRQ_H + +#endif /* _ASM_HW_IRQ_H */ diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h new file mode 100644 index 0000000..ba544c7 --- /dev/null +++ b/arch/mn10300/include/asm/intctl-regs.h @@ -0,0 +1,73 @@ +/* MN10300 On-board interrupt controller registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_INTCTL_REGS_H +#define _ASM_INTCTL_REGS_H + +#include + +#ifdef __KERNEL__ + +/* interrupt controller registers */ +#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */ + +#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */ +#define IAGR_GN 0x00fc /* group number register + * (documentation _has_ to be wrong) + */ + +#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */ +#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3) + +#define SET_XIRQ_TRIGGER(X,Y) \ +do { \ + u16 x = EXTMD; \ + x &= ~(3 << ((X) * 2)); \ + x |= ((Y) & 3) << ((X) * 2); \ + EXTMD = x; \ +} while (0) + +#define XIRQ_TRIGGER_LOWLEVEL 0 +#define XIRQ_TRIGGER_HILEVEL 1 +#define XIRQ_TRIGGER_NEGEDGE 2 +#define XIRQ_TRIGGER_POSEDGE 3 + +/* non-maskable interrupt control */ +#define NMIIRQ 0 +#define NMICR GxICR(NMIIRQ) /* NMI control register */ +#define NMICR_NMIF 0x0001 /* NMI pin interrupt flag */ +#define NMICR_WDIF 0x0002 /* watchdog timer overflow flag */ +#define NMICR_ABUSERR 0x0008 /* async bus error flag */ + +/* maskable interrupt control */ +#define GxICR_DETECT 0x0001 /* interrupt detect flag */ +#define GxICR_REQUEST 0x0010 /* interrupt request flag */ +#define GxICR_ENABLE 0x0100 /* interrupt enable flag */ +#define GxICR_LEVEL 0x7000 /* interrupt priority level */ +#define GxICR_LEVEL_0 0x0000 /* - level 0 */ +#define GxICR_LEVEL_1 0x1000 /* - level 1 */ +#define GxICR_LEVEL_2 0x2000 /* - level 2 */ +#define GxICR_LEVEL_3 0x3000 /* - level 3 */ +#define GxICR_LEVEL_4 0x4000 /* - level 4 */ +#define GxICR_LEVEL_5 0x5000 /* - level 5 */ +#define GxICR_LEVEL_6 0x6000 /* - level 6 */ +#define GxICR_LEVEL_SHIFT 12 + +#ifndef __ASSEMBLY__ +extern void set_intr_level(int irq, u16 level); +extern void set_intr_postackable(int irq); +#endif + +/* external interrupts */ +#define XIRQxICR(X) GxICR((X)) /* external interrupt control regs */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_INTCTL_REGS_H */ diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h new file mode 100644 index 0000000..c1a4119 --- /dev/null +++ b/arch/mn10300/include/asm/io.h @@ -0,0 +1,301 @@ +/* MN10300 I/O port emulation and memory-mapped I/O + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include /* I/O is all done through memory accesses */ +#include +#include + +#define mmiowb() do {} while (0) + +/*****************************************************************************/ +/* + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the x86 architecture, we just read/write the + * memory location directly. + */ +static inline u8 readb(const volatile void __iomem *addr) +{ + return *(const volatile u8 *) addr; +} + +static inline u16 readw(const volatile void __iomem *addr) +{ + return *(const volatile u16 *) addr; +} + +static inline u32 readl(const volatile void __iomem *addr) +{ + return *(const volatile u32 *) addr; +} + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl + +static inline void writeb(u8 b, volatile void __iomem *addr) +{ + *(volatile u8 *) addr = b; +} + +static inline void writew(u16 b, volatile void __iomem *addr) +{ + *(volatile u16 *) addr = b; +} + +static inline void writel(u32 b, volatile void __iomem *addr) +{ + *(volatile u32 *) addr = b; +} + +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +/*****************************************************************************/ +/* + * traditional input/output functions + */ +static inline u8 inb_local(unsigned long addr) +{ + return readb((volatile void __iomem *) addr); +} + +static inline void outb_local(u8 b, unsigned long addr) +{ + return writeb(b, (volatile void __iomem *) addr); +} + +static inline u8 inb(unsigned long addr) +{ + return readb((volatile void __iomem *) addr); +} + +static inline u16 inw(unsigned long addr) +{ + return readw((volatile void __iomem *) addr); +} + +static inline u32 inl(unsigned long addr) +{ + return readl((volatile void __iomem *) addr); +} + +static inline void outb(u8 b, unsigned long addr) +{ + return writeb(b, (volatile void __iomem *) addr); +} + +static inline void outw(u16 b, unsigned long addr) +{ + return writew(b, (volatile void __iomem *) addr); +} + +static inline void outl(u32 b, unsigned long addr) +{ + return writel(b, (volatile void __iomem *) addr); +} + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x, addr) outb((x), (addr)) +#define outw_p(x, addr) outw((x), (addr)) +#define outl_p(x, addr) outl((x), (addr)) + +static inline void insb(unsigned long addr, void *buffer, int count) +{ + if (count) { + u8 *buf = buffer; + do { + u8 x = inb(addr); + *buf++ = x; + } while (--count); + } +} + +static inline void insw(unsigned long addr, void *buffer, int count) +{ + if (count) { + u16 *buf = buffer; + do { + u16 x = inw(addr); + *buf++ = x; + } while (--count); + } +} + +static inline void insl(unsigned long addr, void *buffer, int count) +{ + if (count) { + u32 *buf = buffer; + do { + u32 x = inl(addr); + *buf++ = x; + } while (--count); + } +} + +static inline void outsb(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u8 *buf = buffer; + do { + outb(*buf++, addr); + } while (--count); + } +} + +static inline void outsw(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u16 *buf = buffer; + do { + outw(*buf++, addr); + } while (--count); + } +} + +extern void __outsl(unsigned long addr, const void *buffer, int count); +static inline void outsl(unsigned long addr, const void *buffer, int count) +{ + if ((unsigned long) buffer & 0x3) + return __outsl(addr, buffer, count); + + if (count) { + const u32 *buf = buffer; + do { + outl(*buf++, addr); + } while (--count); + } +} + +#define ioread8(addr) readb(addr) +#define ioread16(addr) readw(addr) +#define ioread32(addr) readl(addr) + +#define iowrite8(v, addr) writeb((v), (addr)) +#define iowrite16(v, addr) writew((v), (addr)) +#define iowrite32(v, addr) writel((v), (addr)) + +#define ioread8_rep(p, dst, count) \ + insb((unsigned long) (p), (dst), (count)) +#define ioread16_rep(p, dst, count) \ + insw((unsigned long) (p), (dst), (count)) +#define ioread32_rep(p, dst, count) \ + insl((unsigned long) (p), (dst), (count)) + +#define iowrite8_rep(p, src, count) \ + outsb((unsigned long) (p), (src), (count)) +#define iowrite16_rep(p, src, count) \ + outsw((unsigned long) (p), (src), (count)) +#define iowrite32_rep(p, src, count) \ + outsl((unsigned long) (p), (src), (count)) + + +#define IO_SPACE_LIMIT 0xffffffff + +#ifdef __KERNEL__ + +#include +#define __io_virt(x) ((void *) (x)) + +/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ +struct pci_dev; +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) +{ +} + +/* + * Change virtual addresses to physical addresses and vv. + * These are pretty trivial + */ +static inline unsigned long virt_to_phys(volatile void *address) +{ + return __pa(address); +} + +static inline void *phys_to_virt(unsigned long address) +{ + return __va(address); +} + +/* + * Change "struct page" to physical address. + */ +static inline void *__ioremap(unsigned long offset, unsigned long size, + unsigned long flags) +{ + return (void *) offset; +} + +static inline void *ioremap(unsigned long offset, unsigned long size) +{ + return (void *) offset; +} + +/* + * This one maps high address device memory and turns off caching for that + * area. it's useful if some control registers are in such an area and write + * combining or read caching is not desirable: + */ +static inline void *ioremap_nocache(unsigned long offset, unsigned long size) +{ + return (void *) (offset | 0x20000000); +} + +#define ioremap_wc ioremap_nocache + +static inline void iounmap(void *addr) +{ +} + +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return (void __iomem *) port; +} + +static inline void ioport_unmap(void __iomem *p) +{ +} + +#define xlate_dev_kmem_ptr(p) ((void *) (p)) +#define xlate_dev_mem_ptr(p) ((void *) (p)) + +/* + * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff + */ +static inline unsigned long virt_to_bus(volatile void *address) +{ + return ((unsigned long) address) & ~0x20000000; +} + +static inline void *bus_to_virt(unsigned long address) +{ + return (void *) address; +} + +#define page_to_bus page_to_phys + +#define memset_io(a, b, c) memset(__io_virt(a), (b), (c)) +#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c)) +#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c)) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_IO_H */ diff --git a/arch/mn10300/include/asm/ioctl.h b/arch/mn10300/include/asm/ioctl.h new file mode 100644 index 0000000..b279fe0 --- /dev/null +++ b/arch/mn10300/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h new file mode 100644 index 0000000..dcbfb45 --- /dev/null +++ b/arch/mn10300/include/asm/ioctls.h @@ -0,0 +1,88 @@ +#ifndef _ASM_IOCTLS_H +#define _ASM_IOCTLS_H + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 0x2A, struct termios2) +#define TCSETS2 _IOW('T', 0x2B, struct termios2) +#define TCSETSW2 _IOW('T', 0x2C, struct termios2) +#define TCSETSF2 _IOW('T', 0x2D, struct termios2) +#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number + * (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ +#define FIOQSIZE 0x5460 + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* _ASM_IOCTLS_H */ diff --git a/arch/mn10300/include/asm/ipc.h b/arch/mn10300/include/asm/ipc.h new file mode 100644 index 0000000..a46e3d9 --- /dev/null +++ b/arch/mn10300/include/asm/ipc.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/ipcbuf.h b/arch/mn10300/include/asm/ipcbuf.h new file mode 100644 index 0000000..f6f63d4 --- /dev/null +++ b/arch/mn10300/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef _ASM_IPCBUF_H +#define _ASM_IPCBUF_H + +/* + * The ipc64_perm structure for MN10300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_IPCBUF_H */ diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h new file mode 100644 index 0000000..53b3801 --- /dev/null +++ b/arch/mn10300/include/asm/irq.h @@ -0,0 +1,32 @@ +/* MN10300 Hardware interrupt definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Modified by David Howells (dhowells@redhat.com) + * - Derived from include/asm-i386/irq.h: + * - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_IRQ_H +#define _ASM_IRQ_H + +#include +#include +#include + +/* this number is used when no interrupt has been assigned */ +#define NO_IRQ INT_MAX + +/* hardware irq numbers */ +#define NR_IRQS GxICR_NUM_IRQS + +/* external hardware irq numbers */ +#define NR_XIRQS GxICR_NUM_XIRQS + +#define irq_canonicalize(IRQ) (IRQ) + +#endif /* _ASM_IRQ_H */ diff --git a/arch/mn10300/include/asm/irq_regs.h b/arch/mn10300/include/asm/irq_regs.h new file mode 100644 index 0000000..a848cd2 --- /dev/null +++ b/arch/mn10300/include/asm/irq_regs.h @@ -0,0 +1,24 @@ +/* MN10300 IRQ registers pointer definition + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_IRQ_REGS_H +#define _ASM_IRQ_REGS_H + +/* + * Per-cpu current frame pointer - the location of the last exception frame on + * the stack + */ +#define ARCH_HAS_OWN_IRQ_REGS + +#ifndef __ASSEMBLY__ +#define get_irq_regs() (__frame) +#endif + +#endif /* _ASM_IRQ_REGS_H */ diff --git a/arch/mn10300/include/asm/kdebug.h b/arch/mn10300/include/asm/kdebug.h new file mode 100644 index 0000000..0f47e11 --- /dev/null +++ b/arch/mn10300/include/asm/kdebug.h @@ -0,0 +1,22 @@ +/* MN10300 In-kernel death knells + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_KDEBUG_H +#define _ASM_KDEBUG_H + +/* Grossly misnamed. */ +enum die_val { + DIE_OOPS = 1, + DIE_BREAKPOINT, + DIE_GPF, +}; + +#endif /* _ASM_KDEBUG_H */ diff --git a/arch/mn10300/include/asm/kmap_types.h b/arch/mn10300/include/asm/kmap_types.h new file mode 100644 index 0000000..3398f9f --- /dev/null +++ b/arch/mn10300/include/asm/kmap_types.h @@ -0,0 +1,31 @@ +/* MN10300 kmap_atomic() slot IDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif /* _ASM_KMAP_TYPES_H */ diff --git a/arch/mn10300/include/asm/kprobes.h b/arch/mn10300/include/asm/kprobes.h new file mode 100644 index 0000000..c800b59 --- /dev/null +++ b/arch/mn10300/include/asm/kprobes.h @@ -0,0 +1,50 @@ +/* MN10300 Kernel Probes support + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public Licence as published by + * the Free Software Foundation; either version 2 of the Licence, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public Licence for more details. + * + * You should have received a copy of the GNU General Public Licence + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ +#ifndef _ASM_KPROBES_H +#define _ASM_KPROBES_H + +#include +#include + +struct kprobe; + +typedef unsigned char kprobe_opcode_t; +#define BREAKPOINT_INSTRUCTION 0xff +#define MAX_INSN_SIZE 8 +#define MAX_STACK_SIZE 128 + +/* Architecture specific copy of original instruction */ +struct arch_specific_insn { + /* copy of original instruction + */ + kprobe_opcode_t insn[MAX_INSN_SIZE]; +}; + +extern const int kretprobe_blacklist_size; + +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +#define flush_insn_slot(p) do {} while (0) + +extern void arch_remove_kprobe(struct kprobe *p); + +#endif /* _ASM_KPROBES_H */ diff --git a/arch/mn10300/include/asm/linkage.h b/arch/mn10300/include/asm/linkage.h new file mode 100644 index 0000000..dda3002 --- /dev/null +++ b/arch/mn10300/include/asm/linkage.h @@ -0,0 +1,20 @@ +/* MN10300 Linkage and calling-convention overrides + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_LINKAGE_H +#define _ASM_LINKAGE_H + +/* don't override anything */ +#define asmlinkage + +#define __ALIGN .align 4,0xcb +#define __ALIGN_STR ".align 4,0xcb" + +#endif diff --git a/arch/mn10300/include/asm/local.h b/arch/mn10300/include/asm/local.h new file mode 100644 index 0000000..c11c530 --- /dev/null +++ b/arch/mn10300/include/asm/local.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/mc146818rtc.h b/arch/mn10300/include/asm/mc146818rtc.h new file mode 100644 index 0000000..df6bc6e --- /dev/null +++ b/arch/mn10300/include/asm/mc146818rtc.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h new file mode 100644 index 0000000..b7986b6 --- /dev/null +++ b/arch/mn10300/include/asm/mman.h @@ -0,0 +1,28 @@ +/* MN10300 Constants for mmap and co. + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * - Derived from asm-x86/mman.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_MMAN_H +#define _ASM_MMAN_H + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* _ASM_MMAN_H */ diff --git a/arch/mn10300/include/asm/mmu.h b/arch/mn10300/include/asm/mmu.h new file mode 100644 index 0000000..2d2d097 --- /dev/null +++ b/arch/mn10300/include/asm/mmu.h @@ -0,0 +1,19 @@ +/* MN10300 Memory management context + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-frv/mmu.h + */ + +#ifndef _ASM_MMU_H +#define _ASM_MMU_H + +/* + * MMU context + */ +typedef struct { + unsigned long tlbpid[NR_CPUS]; /* TLB PID for this process on + * each CPU */ +} mm_context_t; + +#endif /* _ASM_MMU_H */ diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h new file mode 100644 index 0000000..a9e2e34 --- /dev/null +++ b/arch/mn10300/include/asm/mmu_context.h @@ -0,0 +1,138 @@ +/* MN10300 MMU context management + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Modified by David Howells (dhowells@redhat.com) + * - Derived from include/asm-m32r/mmu_context.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + * + * + * This implements an algorithm to provide TLB PID mappings to provide + * selective access to the TLB for processes, thus reducing the number of TLB + * flushes required. + * + * Note, however, that the M32R algorithm is technically broken as it does not + * handle version wrap-around, and could, theoretically, have a problem with a + * very long lived program that sleeps long enough for the version number to + * wrap all the way around so that its TLB mappings appear valid once again. + */ +#ifndef _ASM_MMU_CONTEXT_H +#define _ASM_MMU_CONTEXT_H + +#include +#include +#include +#include + +#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL +#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL +#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL +#define MMU_NO_CONTEXT 0x00000000UL + +extern unsigned long mmu_context_cache[NR_CPUS]; +#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) + +#define enter_lazy_tlb(mm, tsk) do {} while (0) + +#ifdef CONFIG_SMP +#define cpu_ran_vm(cpu, task) \ + cpu_set((cpu), (task)->cpu_vm_mask) +#define cpu_maybe_ran_vm(cpu, task) \ + cpu_test_and_set((cpu), (task)->cpu_vm_mask) +#else +#define cpu_ran_vm(cpu, task) do {} while (0) +#define cpu_maybe_ran_vm(cpu, task) true +#endif /* CONFIG_SMP */ + +/* + * allocate an MMU context + */ +static inline unsigned long allocate_mmu_context(struct mm_struct *mm) +{ + unsigned long *pmc = &mmu_context_cache[smp_processor_id()]; + unsigned long mc = ++(*pmc); + + if (!(mc & MMU_CONTEXT_TLBPID_MASK)) { + /* we exhausted the TLB PIDs of this version on this CPU, so we + * flush this CPU's TLB in its entirety and start new cycle */ + flush_tlb_all(); + + /* fix the TLB version if needed (we avoid version #0 so as to + * distingush MMU_NO_CONTEXT) */ + if (!mc) + *pmc = mc = MMU_CONTEXT_FIRST_VERSION; + } + mm_context(mm) = mc; + return mc; +} + +/* + * get an MMU context if one is needed + */ +static inline unsigned long get_mmu_context(struct mm_struct *mm) +{ + unsigned long mc = MMU_NO_CONTEXT, cache; + + if (mm) { + cache = mmu_context_cache[smp_processor_id()]; + mc = mm_context(mm); + + /* if we have an old version of the context, replace it */ + if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK) + mc = allocate_mmu_context(mm); + } + return mc; +} + +/* + * initialise the context related info for a new mm_struct instance + */ +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + int num_cpus = NR_CPUS, i; + + for (i = 0; i < num_cpus; i++) + mm->context.tlbpid[i] = MMU_NO_CONTEXT; + return 0; +} + +/* + * destroy context related info for an mm_struct that is about to be put to + * rest + */ +#define destroy_context(mm) do { } while (0) + +/* + * after we have set current->mm to a new value, this activates the context for + * the new mm so we see the new mappings. + */ +static inline void activate_context(struct mm_struct *mm, int cpu) +{ + PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK; +} + +/* + * change between virtual memory sets + */ +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + int cpu = smp_processor_id(); + + if (prev != next) { + cpu_ran_vm(cpu, next); + activate_context(next, cpu); + PTBR = (unsigned long) next->pgd; + } else if (!cpu_maybe_ran_vm(cpu, next)) { + activate_context(next, cpu); + } +} + +#define deactivate_mm(tsk, mm) do {} while (0) +#define activate_mm(prev, next) switch_mm((prev), (next), NULL) + +#endif /* _ASM_MMU_CONTEXT_H */ diff --git a/arch/mn10300/include/asm/module.h b/arch/mn10300/include/asm/module.h new file mode 100644 index 0000000..5d7057d --- /dev/null +++ b/arch/mn10300/include/asm/module.h @@ -0,0 +1,27 @@ +/* MN10300 Arch-specific module definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by Mark Salter (msalter@redhat.com) + * Derived from include/asm-i386/module.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_MODULE_H +#define _ASM_MODULE_H + +struct mod_arch_specific { +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +/* + * Include the MN10300 architecture version. + */ +#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " " + +#endif /* _ASM_MODULE_H */ diff --git a/arch/mn10300/include/asm/msgbuf.h b/arch/mn10300/include/asm/msgbuf.h new file mode 100644 index 0000000..8b60245 --- /dev/null +++ b/arch/mn10300/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _ASM_MSGBUF_H +#define _ASM_MSGBUF_H + +/* + * The msqid64_ds structure for MN10300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_MSGBUF_H */ diff --git a/arch/mn10300/include/asm/mutex.h b/arch/mn10300/include/asm/mutex.h new file mode 100644 index 0000000..84f5490 --- /dev/null +++ b/arch/mn10300/include/asm/mutex.h @@ -0,0 +1,16 @@ +/* MN10300 Mutex fastpath + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + * + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ +#include diff --git a/arch/mn10300/include/asm/nmi.h b/arch/mn10300/include/asm/nmi.h new file mode 100644 index 0000000..f3671cb --- /dev/null +++ b/arch/mn10300/include/asm/nmi.h @@ -0,0 +1,14 @@ +/* MN10300 NMI handling + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_NMI_H +#define _ASM_NMI_H + +#endif /* _ASM_NMI_H */ diff --git a/arch/mn10300/include/asm/page.h b/arch/mn10300/include/asm/page.h new file mode 100644 index 0000000..8288e12 --- /dev/null +++ b/arch/mn10300/include/asm/page.h @@ -0,0 +1,128 @@ +/* MN10300 Page table definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PAGE_H +#define _ASM_PAGE_H + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 + +#ifndef __ASSEMBLY__ +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE - 1)) +#else +#define PAGE_SIZE +(1 << PAGE_SHIFT) /* unary plus marks an + * immediate val not an addr */ +#define PAGE_MASK +(~(PAGE_SIZE - 1)) +#endif + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) +#define copy_page(to, from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) + +#define clear_user_page(addr, vaddr, page) clear_page(addr) +#define copy_user_page(vto, vfrom, vaddr, to) copy_page(vto, vfrom) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define PTE_MASK PAGE_MASK +#define HPAGE_SHIFT 22 + +#ifdef CONFIG_HUGETLB_PAGE +#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#endif + +#define pte_val(x) ((x).pte) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) }) +#define __pgd(x) ((pgd_t) { (x) }) +#define __pgprot(x) ((pgprot_t) { (x) }) + +#include + +#endif /* !__ASSEMBLY__ */ + +/* + * This handles the memory map.. We could make this a config + * option, but too many people screw it up, and too few need + * it. + * + * A __PAGE_OFFSET of 0xC0000000 means that the kernel has + * a virtual address space of one gigabyte, which limits the + * amount of physical memory you can use to about 950MB. + */ + +#ifndef __ASSEMBLY__ + +/* Pure 2^n version of get_order */ +static inline int get_order(unsigned long size) __attribute__((const)); +static inline int get_order(unsigned long size) +{ + int order; + + size = (size - 1) >> (PAGE_SHIFT - 1); + order = -1; + do { + size >>= 1; + order++; + } while (size); + return order; +} + +#endif /* __ASSEMBLY__ */ + +#include + +#define __PAGE_OFFSET (PAGE_OFFSET_RAW) +#define PAGE_OFFSET ((unsigned long) __PAGE_OFFSET) + +/* + * main RAM and kernel working space are coincident at 0x90000000, but to make + * life more interesting, there's also an uncached virtual shadow at 0xb0000000 + * - these mappings are fixed in the MMU + */ +#define __pfn_disp (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT) + +#define __pa(x) ((unsigned long)(x)) +#define __va(x) ((void *)(unsigned long)(x)) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#define pfn_to_page(pfn) (mem_map + ((pfn) - __pfn_disp)) +#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + __pfn_disp) + +#define pfn_valid(pfn) \ +({ \ + unsigned long __pfn = (pfn) - __pfn_disp; \ + __pfn < max_mapnr; \ +}) + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS \ + (VM_READ | VM_WRITE | \ + ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PAGE_H */ diff --git a/arch/mn10300/include/asm/page_offset.h b/arch/mn10300/include/asm/page_offset.h new file mode 100644 index 0000000..8eb5b16 --- /dev/null +++ b/arch/mn10300/include/asm/page_offset.h @@ -0,0 +1,11 @@ +/* MN10300 Kernel base address + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + */ +#ifndef _ASM_PAGE_OFFSET_H +#define _ASM_PAGE_OFFSET_H + +#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS + +#endif diff --git a/arch/mn10300/include/asm/param.h b/arch/mn10300/include/asm/param.h new file mode 100644 index 0000000..789b1df --- /dev/null +++ b/arch/mn10300/include/asm/param.h @@ -0,0 +1,34 @@ +/* MN10300 Kernel parameters + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PARAM_H +#define _ASM_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ /* Internal kernel timer frequency */ +#define USER_HZ 100 /* .. some user interfaces are in + * "ticks" */ +#define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ +#define COMMAND_LINE_SIZE 256 + +#endif /* _ASM_PARAM_H */ diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h new file mode 100644 index 0000000..0517b45 --- /dev/null +++ b/arch/mn10300/include/asm/pci.h @@ -0,0 +1,129 @@ +/* MN10300 PCI definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PCI_H +#define _ASM_PCI_H + +#ifdef __KERNEL__ +#include /* for struct page */ + +#if 0 +#define __pcbdebug(FMT, ADDR, ...) \ + printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \ + (u32)(ADDR), ##__VA_ARGS__) + +#define __pcidebug(FMT, BUS, DEVFN, WHERE,...) \ +do { \ + printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n", \ + (BUS)->number, \ + PCI_SLOT(DEVFN), \ + PCI_FUNC(DEVFN), \ + (u32)(WHERE), ##__VA_ARGS__); \ +} while (0) + +#else +#define __pcbdebug(FMT, ADDR, ...) do {} while (0) +#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0) +#endif + +/* Can be used to override the logic in pci_scan_bus for skipping + * already-configured bus numbers - to be used for buggy BIOSes or + * architectures with incomplete PCI setup by the loader */ + +#ifdef CONFIG_PCI +#define pcibios_assign_all_busses() 1 +extern void unit_pci_init(void); +#else +#define pcibios_assign_all_busses() 0 +#endif + +extern unsigned long pci_mem_start; +#define PCIBIOS_MIN_IO 0xBE000004 +#define PCIBIOS_MIN_MEM 0xB8000000 + +void pcibios_set_master(struct pci_dev *dev); +void pcibios_penalize_isa_irq(int irq); + +/* Dynamic DMA mapping stuff. + * i386 has everything mapped statically. + */ + +#include +#include +#include +#include +#include +#include + +struct pci_dev; + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + + +/* This is always fine. */ +#define pci_dac_dma_supported(pci_dev, mask) (0) + +/* Return the index of the PCI controller for device. */ +static inline int pci_controller_num(struct pci_dev *dev) +{ + return 0; +} + +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, + int write_combine); + +#endif /* __KERNEL__ */ + +/* implement the pci_ DMA API in terms of the generic device dma_ one */ +#include + +/** + * pcibios_resource_to_bus - convert resource to PCI bus address + * @dev: device which owns this resource + * @region: converted bus-centric region (start,end) + * @res: resource to convert + * + * Convert a resource to a PCI device bus address or bus window. + */ +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, + struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, + struct resource *res, + struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +#define pcibios_scan_all_fns(a, b) 0 + +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} + +#endif /* _ASM_PCI_H */ diff --git a/arch/mn10300/include/asm/percpu.h b/arch/mn10300/include/asm/percpu.h new file mode 100644 index 0000000..06a959d --- /dev/null +++ b/arch/mn10300/include/asm/percpu.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h new file mode 100644 index 0000000..ec057e1 --- /dev/null +++ b/arch/mn10300/include/asm/pgalloc.h @@ -0,0 +1,56 @@ +/* MN10300 Page and page table/directory allocation + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PGALLOC_H +#define _ASM_PGALLOC_H + +#include +#include +#include +#include /* for struct page */ + +struct mm_struct; +struct page; + +/* attach a page table to a PMD entry */ +#define pmd_populate_kernel(mm, pmd, pte) \ + set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE)) + +static inline +void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte) +{ + set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE)); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * Allocate and free page tables. + */ + +extern pgd_t *pgd_alloc(struct mm_struct *); +extern void pgd_free(struct mm_struct *, pgd_t *); + +extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); +extern struct page *pte_alloc_one(struct mm_struct *, unsigned long); + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long) pte); +} + +static inline void pte_free(struct mm_struct *mm, struct page *pte) +{ + __free_page(pte); +} + + +#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte)) + +#endif /* _ASM_PGALLOC_H */ diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h new file mode 100644 index 0000000..6dc30fc --- /dev/null +++ b/arch/mn10300/include/asm/pgtable.h @@ -0,0 +1,492 @@ +/* MN10300 Page table manipulators and constants + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + * + * + * The Linux memory management assumes a three-level page table setup. On + * the i386, we use that, but "fold" the mid level into the top-level page + * table, so that we physically have the same two-level page table as the + * i386 mmu expects. + * + * This file contains the functions and defines necessary to modify and use + * the i386 page table tree for the purposes of the MN10300 TLB handler + * functions. + */ +#ifndef _ASM_PGTABLE_H +#define _ASM_PGTABLE_H + +#include + +#ifndef __ASSEMBLY__ +#include +#include +#include + +#include + +#include +#include +#include + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) +extern unsigned long empty_zero_page[1024]; +extern spinlock_t pgd_lock; +extern struct page *pgd_list; + +extern void pmd_ctor(void *, struct kmem_cache *, unsigned long); +extern void pgtable_cache_init(void); +extern void paging_init(void); + +#endif /* !__ASSEMBLY__ */ + +/* + * The Linux mn10300 paging architecture only implements both the traditional + * 2-level page tables + */ +#define PGDIR_SHIFT 22 +#define PTRS_PER_PGD 1024 +#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */ +#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */ +#define PTRS_PER_PTE 1024 + +#define PGD_SIZE PAGE_SIZE +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE - 1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) +#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS) + +#define TWOLEVEL_PGDIR_SHIFT 22 +#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) +#define BOOT_KERNEL_PGD_PTRS (1024 - BOOT_USER_PGD_PTRS) + +#ifndef __ASSEMBLY__ +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +#endif + +/* + * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM + * area has to be in the lower half of the virtual address range (the upper + * half is not translated through the TLB). + * + * So in this case, the vmalloc area goes at the bottom of the address map + * (leaving a hole at the very bottom to catch addressing errors), and + * userspace starts immediately above. + * + * The vmalloc() routines also leaves a hole of 4kB between each vmalloced + * area to catch addressing errors. + */ +#define VMALLOC_OFFSET (8 * 1024 * 1024) +#define VMALLOC_START (0x70000000) +#define VMALLOC_END (0x7C000000) + +#ifndef __ASSEMBLY__ +extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; +#endif + +/* IPTEL/DPTEL bit assignments */ +#define _PAGE_BIT_VALID xPTEL_V_BIT +#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */ +#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */ +#define _PAGE_BIT_CACHE xPTEL_C_BIT +#define _PAGE_BIT_PRESENT xPTEL_PV_BIT +#define _PAGE_BIT_DIRTY xPTEL_D_BIT +#define _PAGE_BIT_GLOBAL xPTEL_G_BIT + +#define _PAGE_VALID xPTEL_V +#define _PAGE_ACCESSED xPTEL_UNUSED1 +#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */ +#define _PAGE_CACHE xPTEL_C +#define _PAGE_PRESENT xPTEL_PV +#define _PAGE_DIRTY xPTEL_D +#define _PAGE_PROT xPTEL_PR +#define _PAGE_PROT_RKNU xPTEL_PR_ROK +#define _PAGE_PROT_WKNU xPTEL_PR_RWK +#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU +#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU +#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU +#define _PAGE_GLOBAL xPTEL_G +#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */ + +#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */ + +#define __PAGE_PROT_UWAUX 0x040 +#define __PAGE_PROT_USER 0x080 +#define __PAGE_PROT_WRITE 0x100 + +#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID) +#define _PAGE_PROTNONE 0x000 /* If not present */ + +#ifndef __ASSEMBLY__ + +#define VMALLOC_VMADDR(x) ((unsigned long)(x)) + +#define _PAGE_TABLE (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY) +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +#define __PAGE_NONE (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE) +#define __PAGE_SHARED (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE) +#define __PAGE_COPY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) +#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) + +#define PAGE_NONE __pgprot(__PAGE_NONE | _PAGE_NX) +#define PAGE_SHARED_NOEXEC __pgprot(__PAGE_SHARED | _PAGE_NX) +#define PAGE_COPY_NOEXEC __pgprot(__PAGE_COPY | _PAGE_NX) +#define PAGE_READONLY_NOEXEC __pgprot(__PAGE_READONLY | _PAGE_NX) +#define PAGE_SHARED_EXEC __pgprot(__PAGE_SHARED) +#define PAGE_COPY_EXEC __pgprot(__PAGE_COPY) +#define PAGE_READONLY_EXEC __pgprot(__PAGE_READONLY) +#define PAGE_COPY PAGE_COPY_NOEXEC +#define PAGE_READONLY PAGE_READONLY_NOEXEC +#define PAGE_SHARED PAGE_SHARED_EXEC + +#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL) + +#define __PAGE_KERNEL (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX) +#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX) +#define __PAGE_KERNEL_EXEC (__PAGE_KERNEL & ~_PAGE_NX) +#define __PAGE_KERNEL_RO (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX) +#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE) +#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE) + +#define PAGE_KERNEL __pgprot(__PAGE_KERNEL) +#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO) +#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC) +#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE) +#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE) +#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC) + +/* + * Whilst the MN10300 can do page protection for execute (given separate data + * and insn TLBs), we are not supporting it at the moment. Write permission, + * however, always implies read permission (but not execute permission). + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY_NOEXEC +#define __P010 PAGE_COPY_NOEXEC +#define __P011 PAGE_COPY_NOEXEC +#define __P100 PAGE_READONLY_EXEC +#define __P101 PAGE_READONLY_EXEC +#define __P110 PAGE_COPY_EXEC +#define __P111 PAGE_COPY_EXEC + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY_NOEXEC +#define __S010 PAGE_SHARED_NOEXEC +#define __S011 PAGE_SHARED_NOEXEC +#define __S100 PAGE_READONLY_EXEC +#define __S101 PAGE_READONLY_EXEC +#define __S110 PAGE_SHARED_EXEC +#define __S111 PAGE_SHARED_EXEC + +/* + * Define this to warn about kernel memory accesses that are + * done without a 'verify_area(VERIFY_WRITE,..)' + */ +#undef TEST_VERIFY_AREA + +#define pte_present(x) (pte_val(x) & _PAGE_VALID) +#define pte_clear(mm, addr, xp) \ +do { \ + set_pte_at((mm), (addr), (xp), __pte(0)); \ +} while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (!pmd_none(x)) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) 0 + + +#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) + +#ifndef __ASSEMBLY__ + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_user(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } +static inline int pte_read(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; } +static inline int pte_special(pte_t pte){ return 0; } + +/* + * The following only works if pte_present() is not true. + */ +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } + +static inline pte_t pte_rdprotect(pte_t pte) +{ + pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte; +} +static inline pte_t pte_exprotect(pte_t pte) +{ + pte_val(pte) |= _PAGE_NX; return pte; +} + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte; +} + +static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } +static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) &= ~_PAGE_NX; return pte; } + +static inline pte_t pte_mkread(pte_t pte) +{ + pte_val(pte) |= __PAGE_PROT_USER; + if (pte_write(pte)) + pte_val(pte) |= __PAGE_PROT_UWAUX; + return pte; +} +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte_val(pte) |= __PAGE_PROT_WRITE; + if (pte_val(pte) & __PAGE_PROT_USER) + pte_val(pte) |= __PAGE_PROT_UWAUX; + return pte; +} + +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +#define pte_ERROR(e) \ + printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ + __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ + __FILE__, __LINE__, pgd_val(e)) + +/* + * The "pgd_xxx()" functions here are trivial for a folded two-level + * setup: the pgd is never bad, and a pmd always exists (as it's folded + * into the pgd entry) + */ +#define pgd_clear(xp) do { } while (0) + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm, addr, ptep, pteval) set_pte((ptep), (pteval)) +#define set_pte_atomic(pteptr, pteval) set_pte((pteptr), (pteval)) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +#define ptep_get_and_clear(mm, addr, ptep) \ + __pte(xchg(&(ptep)->pte, 0)) +#define pte_same(a, b) (pte_val(a) == pte_val(b)) +#define pte_page(x) pfn_to_page(pte_pfn(x)) +#define pte_none(x) (!pte_val(x)) +#define pte_pfn(x) ((unsigned long) (pte_val(x) >> PAGE_SHIFT)) +#define __pfn_addr(pfn) ((pfn) << PAGE_SHIFT) +#define pfn_pte(pfn, prot) __pte(__pfn_addr(pfn) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(__pfn_addr(pfn) | pgprot_val(prot)) + +/* + * All present user pages are user-executable: + */ +static inline int pte_exec(pte_t pte) +{ + return pte_user(pte); +} + +/* + * All present pages are kernel-executable: + */ +static inline int pte_exec_kernel(pte_t pte) +{ + return 1; +} + +/* + * Bits 0 and 1 are taken, split up the 29 bits of offset + * into this range: + */ +#define PTE_FILE_MAX_BITS 29 + +#define pte_to_pgoff(pte) (pte_val(pte) >> 2) +#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) + +/* Encode and de-code a swap entry */ +#define __swp_type(x) (((x).val >> 2) & 0x3f) +#define __swp_offset(x) ((x).val >> 8) +#define __swp_entry(type, offset) \ + ((swp_entry_t) { ((type) << 2) | ((offset) << 8) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) __pte((x).val) + +static inline +int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, + pte_t *ptep) +{ + if (!pte_dirty(*ptep)) + return 0; + return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte); +} + +static inline +int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, + pte_t *ptep) +{ + if (!pte_young(*ptep)) + return 0; + return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte); +} + +static inline +void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); +} + +static inline void ptep_mkdirty(pte_t *ptep) +{ + set_bit(_PAGE_BIT_DIRTY, &ptep->pte); +} + +/* + * Macro to mark a page protection value as "uncacheable". On processors which + * do not support it, this is a no-op. + */ +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE) + + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ + +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) +#define mk_pte_huge(entry) \ + ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte_val(pte) &= _PAGE_CHG_MASK; + pte_val(pte) |= pgprot_val(newprot); + return pte; +} + +#define page_pte(page) page_pte_prot((page), __pgprot(0)) + +#define pmd_page_kernel(pmd) \ + ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + +#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) + +#define pmd_large(pmd) \ + ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \ + (_PAGE_PSE | _PAGE_PRESENT)) + +/* + * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD] + * + * this macro returns the index of the entry in the pgd page which would + * control the given virtual address + */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) + +/* + * pgd_offset() returns a (pgd_t *) + * pgd_index() is used get the offset into the pgd page's array of pgd_t's; + */ +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* + * a shortcut which implies the use of the kernel's pgd, instead + * of a process's + */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD] + * + * this macro returns the index of the entry in the pmd page which would + * control the given virtual address + */ +#define pmd_index(address) \ + (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) + +/* + * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] + * + * this macro returns the index of the entry in the pte page which would + * control the given virtual address + */ +#define pte_index(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address)) + +/* + * Make a given kernel text page executable/non-executable. + * Returns the previous executability setting of that page (which + * is used to restore the previous state). Used by the SMP bootup code. + * NOTE: this is an __init function for security reasons. + */ +static inline int set_kernel_exec(unsigned long vaddr, int enable) +{ + return 0; +} + +#define pte_offset_map(dir, address) \ + ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address)) +#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) +#define pte_unmap(pte) do {} while (0) +#define pte_unmap_nested(pte) do {} while (0) + +/* + * The MN10300 has external MMU info in the form of a TLB: this is adapted from + * the kernel page tables containing the necessary information by tlb-mn10300.S + */ +extern void update_mmu_cache(struct vm_area_struct *vma, + unsigned long address, pte_t pte); + +#endif /* !__ASSEMBLY__ */ + +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range((vma), (vaddr), (pfn), (size), (prot)) + +#define MK_IOSPACE_PFN(space, pfn) (pfn) +#define GET_IOSPACE(pfn) 0 +#define GET_PFN(pfn) (pfn) + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define __HAVE_ARCH_PTEP_MKDIRTY +#define __HAVE_ARCH_PTE_SAME +#include + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_PGTABLE_H */ diff --git a/arch/mn10300/include/asm/pio-regs.h b/arch/mn10300/include/asm/pio-regs.h new file mode 100644 index 0000000..96bc818 --- /dev/null +++ b/arch/mn10300/include/asm/pio-regs.h @@ -0,0 +1,233 @@ +/* MN10300 On-board I/O port module registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PIO_REGS_H +#define _ASM_PIO_REGS_H + +#include +#include + +#ifdef __KERNEL__ + +/* I/O port 0 */ +#define P0MD __SYSREG(0xdb000000, u16) /* mode reg */ +#define P0MD_0 0x0003 /* mask */ +#define P0MD_0_IN 0x0000 /* input mode */ +#define P0MD_0_OUT 0x0001 /* output mode */ +#define P0MD_0_TM0IO 0x0002 /* timer 0 I/O mode */ +#define P0MD_0_EYECLK 0x0003 /* test signal output (clock) */ +#define P0MD_1 0x000c +#define P0MD_1_IN 0x0000 +#define P0MD_1_OUT 0x0004 +#define P0MD_1_TM1IO 0x0008 /* timer 1 I/O mode */ +#define P0MD_1_EYED 0x000c /* test signal output (data) */ +#define P0MD_2 0x0030 +#define P0MD_2_IN 0x0000 +#define P0MD_2_OUT 0x0010 +#define P0MD_2_TM2IO 0x0020 /* timer 2 I/O mode */ +#define P0MD_3 0x00c0 +#define P0MD_3_IN 0x0000 +#define P0MD_3_OUT 0x0040 +#define P0MD_3_TM3IO 0x0080 /* timer 3 I/O mode */ +#define P0MD_4 0x0300 +#define P0MD_4_IN 0x0000 +#define P0MD_4_OUT 0x0100 +#define P0MD_4_TM4IO 0x0200 /* timer 4 I/O mode */ +#define P0MD_4_XCTS 0x0300 /* XCTS input for serial port 2 */ +#define P0MD_5 0x0c00 +#define P0MD_5_IN 0x0000 +#define P0MD_5_OUT 0x0400 +#define P0MD_5_TM5IO 0x0800 /* timer 5 I/O mode */ +#define P0MD_6 0x3000 +#define P0MD_6_IN 0x0000 +#define P0MD_6_OUT 0x1000 +#define P0MD_6_TM6IOA 0x2000 /* timer 6 I/O mode A */ +#define P0MD_7 0xc000 +#define P0MD_7_IN 0x0000 +#define P0MD_7_OUT 0x4000 +#define P0MD_7_TM6IOB 0x8000 /* timer 6 I/O mode B */ + +#define P0IN __SYSREG(0xdb000004, u8) /* in reg */ +#define P0OUT __SYSREG(0xdb000008, u8) /* out reg */ + +#define P0TMIO __SYSREG(0xdb00000c, u8) /* TM pin I/O control reg */ +#define P0TMIO_TM0_IN 0x00 +#define P0TMIO_TM0_OUT 0x01 +#define P0TMIO_TM1_IN 0x00 +#define P0TMIO_TM1_OUT 0x02 +#define P0TMIO_TM2_IN 0x00 +#define P0TMIO_TM2_OUT 0x04 +#define P0TMIO_TM3_IN 0x00 +#define P0TMIO_TM3_OUT 0x08 +#define P0TMIO_TM4_IN 0x00 +#define P0TMIO_TM4_OUT 0x10 +#define P0TMIO_TM5_IN 0x00 +#define P0TMIO_TM5_OUT 0x20 +#define P0TMIO_TM6A_IN 0x00 +#define P0TMIO_TM6A_OUT 0x40 +#define P0TMIO_TM6B_IN 0x00 +#define P0TMIO_TM6B_OUT 0x80 + +/* I/O port 1 */ +#define P1MD __SYSREG(0xdb000100, u16) /* mode reg */ +#define P1MD_0 0x0003 /* mask */ +#define P1MD_0_IN 0x0000 /* input mode */ +#define P1MD_0_OUT 0x0001 /* output mode */ +#define P1MD_0_TM7IO 0x0002 /* timer 7 I/O mode */ +#define P1MD_0_ADTRG 0x0003 /* A/D converter trigger mode */ +#define P1MD_1 0x000c +#define P1MD_1_IN 0x0000 +#define P1MD_1_OUT 0x0004 +#define P1MD_1_TM8IO 0x0008 /* timer 8 I/O mode */ +#define P1MD_1_XDMR0 0x000c /* DMA request input 0 mode */ +#define P1MD_2 0x0030 +#define P1MD_2_IN 0x0000 +#define P1MD_2_OUT 0x0010 +#define P1MD_2_TM9IO 0x0020 /* timer 9 I/O mode */ +#define P1MD_2_XDMR1 0x0030 /* DMA request input 1 mode */ +#define P1MD_3 0x00c0 +#define P1MD_3_IN 0x0000 +#define P1MD_3_OUT 0x0040 +#define P1MD_3_TM10IO 0x0080 /* timer 10 I/O mode */ +#define P1MD_3_FRQS0 0x00c0 /* CPU clock multiplier setting input 0 mode */ +#define P1MD_4 0x0300 +#define P1MD_4_IN 0x0000 +#define P1MD_4_OUT 0x0100 +#define P1MD_4_TM11IO 0x0200 /* timer 11 I/O mode */ +#define P1MD_4_FRQS1 0x0300 /* CPU clock multiplier setting input 1 mode */ + +#define P1IN __SYSREG(0xdb000104, u8) /* in reg */ +#define P1OUT __SYSREG(0xdb000108, u8) /* out reg */ +#define P1TMIO __SYSREG(0xdb00010c, u8) /* TM pin I/O control reg */ +#define P1TMIO_TM11_IN 0x00 +#define P1TMIO_TM11_OUT 0x01 +#define P1TMIO_TM10_IN 0x00 +#define P1TMIO_TM10_OUT 0x02 +#define P1TMIO_TM9_IN 0x00 +#define P1TMIO_TM9_OUT 0x04 +#define P1TMIO_TM8_IN 0x00 +#define P1TMIO_TM8_OUT 0x08 +#define P1TMIO_TM7_IN 0x00 +#define P1TMIO_TM7_OUT 0x10 + +/* I/O port 2 */ +#define P2MD __SYSREG(0xdb000200, u16) /* mode reg */ +#define P2MD_0 0x0003 /* mask */ +#define P2MD_0_IN 0x0000 /* input mode */ +#define P2MD_0_OUT 0x0001 /* output mode */ +#define P2MD_0_BOOTBW 0x0003 /* boot bus width selector mode */ +#define P2MD_1 0x000c +#define P2MD_1_IN 0x0000 +#define P2MD_1_OUT 0x0004 +#define P2MD_1_BOOTSEL 0x000c /* boot device selector mode */ +#define P2MD_2 0x0030 +#define P2MD_2_IN 0x0000 +#define P2MD_2_OUT 0x0010 +#define P2MD_3 0x00c0 +#define P2MD_3_IN 0x0000 +#define P2MD_3_OUT 0x0040 +#define P2MD_3_CKIO 0x00c0 /* mode */ +#define P2MD_4 0x0300 +#define P2MD_4_IN 0x0000 +#define P2MD_4_OUT 0x0100 +#define P2MD_4_CMOD 0x0300 /* mode */ + +#define P2IN __SYSREG(0xdb000204, u8) /* in reg */ +#define P2OUT __SYSREG(0xdb000208, u8) /* out reg */ +#define P2TMIO __SYSREG(0xdb00020c, u8) /* TM pin I/O control reg */ + +/* I/O port 3 */ +#define P3MD __SYSREG(0xdb000300, u16) /* mode reg */ +#define P3MD_0 0x0003 /* mask */ +#define P3MD_0_IN 0x0000 /* input mode */ +#define P3MD_0_OUT 0x0001 /* output mode */ +#define P3MD_0_AFRXD 0x0002 /* AFR interface mode */ +#define P3MD_1 0x000c +#define P3MD_1_IN 0x0000 +#define P3MD_1_OUT 0x0004 +#define P3MD_1_AFTXD 0x0008 /* AFR interface mode */ +#define P3MD_2 0x0030 +#define P3MD_2_IN 0x0000 +#define P3MD_2_OUT 0x0010 +#define P3MD_2_AFSCLK 0x0020 /* AFR interface mode */ +#define P3MD_3 0x00c0 +#define P3MD_3_IN 0x0000 +#define P3MD_3_OUT 0x0040 +#define P3MD_3_AFFS 0x0080 /* AFR interface mode */ +#define P3MD_4 0x0300 +#define P3MD_4_IN 0x0000 +#define P3MD_4_OUT 0x0100 +#define P3MD_4_AFEHC 0x0200 /* AFR interface mode */ + +#define P3IN __SYSREG(0xdb000304, u8) /* in reg */ +#define P3OUT __SYSREG(0xdb000308, u8) /* out reg */ + +/* I/O port 4 */ +#define P4MD __SYSREG(0xdb000400, u16) /* mode reg */ +#define P4MD_0 0x0003 /* mask */ +#define P4MD_0_IN 0x0000 /* input mode */ +#define P4MD_0_OUT 0x0001 /* output mode */ +#define P4MD_0_SCL0 0x0002 /* I2C/serial mode */ +#define P4MD_1 0x000c +#define P4MD_1_IN 0x0000 +#define P4MD_1_OUT 0x0004 +#define P4MD_1_SDA0 0x0008 +#define P4MD_2 0x0030 +#define P4MD_2_IN 0x0000 +#define P4MD_2_OUT 0x0010 +#define P4MD_2_SCL1 0x0020 +#define P4MD_3 0x00c0 +#define P4MD_3_IN 0x0000 +#define P4MD_3_OUT 0x0040 +#define P4MD_3_SDA1 0x0080 +#define P4MD_4 0x0300 +#define P4MD_4_IN 0x0000 +#define P4MD_4_OUT 0x0100 +#define P4MD_4_SBO0 0x0200 +#define P4MD_5 0x0c00 +#define P4MD_5_IN 0x0000 +#define P4MD_5_OUT 0x0400 +#define P4MD_5_SBO1 0x0800 +#define P4MD_6 0x3000 +#define P4MD_6_IN 0x0000 +#define P4MD_6_OUT 0x1000 +#define P4MD_6_SBT0 0x2000 +#define P4MD_7 0xc000 +#define P4MD_7_IN 0x0000 +#define P4MD_7_OUT 0x4000 +#define P4MD_7_SBT1 0x8000 + +#define P4IN __SYSREG(0xdb000404, u8) /* in reg */ +#define P4OUT __SYSREG(0xdb000408, u8) /* out reg */ + +/* I/O port 5 */ +#define P5MD __SYSREG(0xdb000500, u16) /* mode reg */ +#define P5MD_0 0x0003 /* mask */ +#define P5MD_0_IN 0x0000 /* input mode */ +#define P5MD_0_OUT 0x0001 /* output mode */ +#define P5MD_0_IRTXD 0x0002 /* IrDA mode */ +#define P5MD_0_SOUT 0x0004 /* serial mode */ +#define P5MD_1 0x000c +#define P5MD_1_IN 0x0000 +#define P5MD_1_OUT 0x0004 +#define P5MD_1_IRRXDS 0x0008 /* IrDA mode */ +#define P5MD_1_SIN 0x000c /* serial mode */ +#define P5MD_2 0x0030 +#define P5MD_2_IN 0x0000 +#define P5MD_2_OUT 0x0010 +#define P5MD_2_IRRXDF 0x0020 /* IrDA mode */ + +#define P5IN __SYSREG(0xdb000504, u8) /* in reg */ +#define P5OUT __SYSREG(0xdb000508, u8) /* out reg */ + + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PIO_REGS_H */ diff --git a/arch/mn10300/include/asm/poll.h b/arch/mn10300/include/asm/poll.h new file mode 100644 index 0000000..c98509d --- /dev/null +++ b/arch/mn10300/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/posix_types.h b/arch/mn10300/include/asm/posix_types.h new file mode 100644 index 0000000..077567c --- /dev/null +++ b/arch/mn10300/include/asm/posix_types.h @@ -0,0 +1,132 @@ +/* MN10300 POSIX types + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_POSIX_TYPES_H +#define _ASM_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static inline void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* _ASM_POSIX_TYPES_H */ diff --git a/arch/mn10300/include/asm/proc-mn103e010/cache.h b/arch/mn10300/include/asm/proc-mn103e010/cache.h new file mode 100644 index 0000000..bdc1f9a --- /dev/null +++ b/arch/mn10300/include/asm/proc-mn103e010/cache.h @@ -0,0 +1,33 @@ +/* MN103E010 Cache specification + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CACHE_H +#define _ASM_PROC_CACHE_H + +/* L1 cache */ + +#define L1_CACHE_NWAYS 4 /* number of ways in caches */ +#define L1_CACHE_NENTRIES 256 /* number of entries in each way */ +#define L1_CACHE_BYTES 16 /* bytes per entry */ +#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */ +#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */ + +#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ +#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ +#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */ +#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ + +/* + * specification of the interval between interrupt checking intervals whilst + * managing the cache with the interrupts disabled + */ +#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 + +#endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/include/asm/proc-mn103e010/clock.h b/arch/mn10300/include/asm/proc-mn103e010/clock.h new file mode 100644 index 0000000..caf9983 --- /dev/null +++ b/arch/mn10300/include/asm/proc-mn103e010/clock.h @@ -0,0 +1,18 @@ +/* MN103E010-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CLOCK_H +#define _ASM_PROC_CLOCK_H + +#include + +#define MN10300_WDCLK MN10300_IOCLK + +#endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/include/asm/proc-mn103e010/irq.h b/arch/mn10300/include/asm/proc-mn103e010/irq.h new file mode 100644 index 0000000..aa6ee8f --- /dev/null +++ b/arch/mn10300/include/asm/proc-mn103e010/irq.h @@ -0,0 +1,34 @@ +/* MN103E010 On-board interrupt controller numbers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_IRQ_H +#define _ASM_PROC_IRQ_H + +#ifdef __KERNEL__ + +#define GxICR_NUM_IRQS 42 + +#define GxICR_NUM_XIRQS 8 + +#define XIRQ0 34 +#define XIRQ1 35 +#define XIRQ2 36 +#define XIRQ3 37 +#define XIRQ4 38 +#define XIRQ5 39 +#define XIRQ6 40 +#define XIRQ7 41 + +#define XIRQ2IRQ(num) (XIRQ0 + num) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PROC_IRQ_H */ diff --git a/arch/mn10300/include/asm/proc-mn103e010/proc.h b/arch/mn10300/include/asm/proc-mn103e010/proc.h new file mode 100644 index 0000000..22a2b93 --- /dev/null +++ b/arch/mn10300/include/asm/proc-mn103e010/proc.h @@ -0,0 +1,18 @@ +/* MN103E010 Processor description + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_PROC_H +#define _ASM_PROC_PROC_H + +#define PROCESSOR_VENDOR_NAME "Matsushita" +#define PROCESSOR_MODEL_NAME "mn103e010" + +#endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h new file mode 100644 index 0000000..7323927 --- /dev/null +++ b/arch/mn10300/include/asm/processor.h @@ -0,0 +1,186 @@ +/* MN10300 Processor specifics + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROCESSOR_H +#define _ASM_PROCESSOR_H + +#include +#include +#include +#include + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() \ +({ \ + void *__pc; \ + asm("mov pc,%0" : "=a"(__pc)); \ + __pc; \ +}) + +extern void show_registers(struct pt_regs *regs); + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * Members of this structure are referenced in head.S, so think twice + * before touching them. [mj] + */ + +struct mn10300_cpuinfo { + int type; + unsigned long loops_per_sec; + char hard_math; + unsigned long *pgd_quick; + unsigned long *pte_quick; + unsigned long pgtable_cache_sz; +}; + +extern struct mn10300_cpuinfo boot_cpu_data; + +#define cpu_data &boot_cpu_data +#define current_cpu_data boot_cpu_data + +extern void identify_cpu(struct mn10300_cpuinfo *); +extern void print_cpu_info(struct mn10300_cpuinfo *); +extern void dodgy_tsc(void); +#define cpu_relax() barrier() + +/* + * User space process size: 1.75GB (default). + */ +#define TASK_SIZE 0x70000000 + +/* + * Where to put the userspace stack by default + */ +#define STACK_TOP 0x70000000 +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE 0x30000000 + +typedef struct { + unsigned long seg; +} mm_segment_t; + +struct fpu_state_struct { + unsigned long fs[32]; /* fpu registers */ + unsigned long fpcr; /* fpu control register */ +}; + +struct thread_struct { + struct pt_regs *uregs; /* userspace register frame */ + unsigned long pc; /* kernel PC */ + unsigned long sp; /* kernel SP */ + unsigned long a3; /* kernel FP */ + unsigned long wchan; + unsigned long usp; + struct pt_regs *__frame; + unsigned long fpu_flags; +#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ + struct fpu_state_struct fpu_state; +}; + +#define INIT_THREAD \ +{ \ + .uregs = init_uregs, \ + .pc = 0, \ + .sp = 0, \ + .a3 = 0, \ + .wchan = 0, \ + .__frame = NULL, \ +} + +#define INIT_MMAP \ +{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \ + NULL, NULL } + +/* + * do necessary setup to start up a newly executed thread + * - need to discard the frame stacked by the kernel thread invoking the execve + * syscall (see RESTORE_ALL macro) + */ +#define start_thread(regs, new_pc, new_sp) do { \ + set_fs(USER_DS); \ + __frame = current->thread.uregs; \ + __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \ + __frame->pc = new_pc; \ + __frame->sp = new_sp; \ +} while (0) + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +extern void prepare_to_copy(struct task_struct *tsk); + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +/* + * Return saved PC of a blocked thread. + */ +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +unsigned long get_wchan(struct task_struct *p); + +#define task_pt_regs(task) \ +({ \ + struct pt_regs *__regs__; \ + __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \ + __regs__ - 1; \ +}) + +#define KSTK_EIP(task) (task_pt_regs(task)->pc) +#define KSTK_ESP(task) (task_pt_regs(task)->sp) + +#define KSTK_TOP(info) \ +({ \ + (unsigned long)(info) + THREAD_SIZE; \ +}) + +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW + +static inline void prefetch(const void *x) +{ +#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_PROC_MN103E010 + asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); +#else + asm volatile ("dcpf (%0)" : : "r"(x)); +#endif +#endif +} + +static inline void prefetchw(const void *x) +{ +#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_PROC_MN103E010 + asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); +#else + asm volatile ("dcpf (%0)" : : "r"(x)); +#endif +#endif +} + +#endif /* _ASM_PROCESSOR_H */ diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h new file mode 100644 index 0000000..7b06cc6 --- /dev/null +++ b/arch/mn10300/include/asm/ptrace.h @@ -0,0 +1,103 @@ +/* MN10300 Exception frame layout and ptrace constants + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PTRACE_H +#define _ASM_PTRACE_H + +#define PT_A3 0 +#define PT_A2 1 +#define PT_D3 2 +#define PT_D2 3 +#define PT_MCVF 4 +#define PT_MCRL 5 +#define PT_MCRH 6 +#define PT_MDRQ 7 +#define PT_E1 8 +#define PT_E0 9 +#define PT_E7 10 +#define PT_E6 11 +#define PT_E5 12 +#define PT_E4 13 +#define PT_E3 14 +#define PT_E2 15 +#define PT_SP 16 +#define PT_LAR 17 +#define PT_LIR 18 +#define PT_MDR 19 +#define PT_A1 20 +#define PT_A0 21 +#define PT_D1 22 +#define PT_D0 23 +#define PT_ORIG_D0 24 +#define PT_EPSW 25 +#define PT_PC 26 +#define NR_PTREGS 27 + +#ifndef __ASSEMBLY__ +/* + * This defines the way registers are stored in the event of an exception + * - the strange order is due to the MOVM instruction + */ +struct pt_regs { + unsigned long a3; /* syscall arg 3 */ + unsigned long a2; /* syscall arg 4 */ + unsigned long d3; /* syscall arg 5 */ + unsigned long d2; /* syscall arg 6 */ + unsigned long mcvf; + unsigned long mcrl; + unsigned long mcrh; + unsigned long mdrq; + unsigned long e1; + unsigned long e0; + unsigned long e7; + unsigned long e6; + unsigned long e5; + unsigned long e4; + unsigned long e3; + unsigned long e2; + unsigned long sp; + unsigned long lar; + unsigned long lir; + unsigned long mdr; + unsigned long a1; + unsigned long a0; /* syscall arg 1 */ + unsigned long d1; /* syscall arg 2 */ + unsigned long d0; /* syscall ret */ + struct pt_regs *next; /* next frame pointer */ + unsigned long orig_d0; /* syscall number */ + unsigned long epsw; + unsigned long pc; +}; +#endif + +extern struct pt_regs *__frame; /* current frame pointer */ + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 + +/* options set using PTRACE_SETOPTIONS */ +#define PTRACE_O_TRACESYSGOOD 0x00000001 + +#if defined(__KERNEL__) + +#if !defined(__ASSEMBLY__) +#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) +#define instruction_pointer(regs) ((regs)->pc) +extern void show_regs(struct pt_regs *); +#endif /* !__ASSEMBLY */ + +#define profile_pc(regs) ((regs)->pc) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PTRACE_H */ diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h new file mode 100644 index 0000000..174523d --- /dev/null +++ b/arch/mn10300/include/asm/reset-regs.h @@ -0,0 +1,64 @@ +/* MN10300 Reset controller and watchdog timer definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_RESET_REGS_H +#define _ASM_RESET_REGS_H + +#include +#include + +#ifdef __KERNEL__ + +#ifdef CONFIG_MN10300_WD_TIMER +#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */ +#endif + +/* + * watchdog timer registers + */ +#define WDBC __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */ + +#define WDCTR __SYSREG(0xc0001002, u8) /* watchdog timer control reg */ +#define WDCTR_WDCK 0x07 /* clock source selection */ +#define WDCTR_WDCK_256th 0x00 /* - OSCI/256 */ +#define WDCTR_WDCK_1024th 0x01 /* - OSCI/1024 */ +#define WDCTR_WDCK_2048th 0x02 /* - OSCI/2048 */ +#define WDCTR_WDCK_16384th 0x03 /* - OSCI/16384 */ +#define WDCTR_WDCK_65536th 0x04 /* - OSCI/65536 */ +#define WDCTR_WDRST 0x40 /* binary counter reset */ +#define WDCTR_WDCNE 0x80 /* watchdog timer enable */ + +#define RSTCTR __SYSREG(0xc0001004, u8) /* reset control reg */ +#define RSTCTR_CHIPRST 0x01 /* chip reset */ +#define RSTCTR_DBFRST 0x02 /* double fault reset flag */ +#define RSTCTR_WDTRST 0x04 /* watchdog timer reset flag */ +#define RSTCTR_WDREN 0x08 /* watchdog timer reset enable */ + +#ifndef __ASSEMBLY__ + +static inline void mn10300_proc_hard_reset(void) +{ + RSTCTR &= ~RSTCTR_CHIPRST; + RSTCTR |= RSTCTR_CHIPRST; +} + +extern unsigned int watchdog_alert_counter; + +extern void watchdog_go(void); +extern asmlinkage void watchdog_handler(void); +extern asmlinkage +void watchdog_interrupt(struct pt_regs *, enum exception_code); + +#endif + +#endif /* __KERNEL__ */ + +#endif /* _ASM_RESET_REGS_H */ diff --git a/arch/mn10300/include/asm/resource.h b/arch/mn10300/include/asm/resource.h new file mode 100644 index 0000000..04bc4db --- /dev/null +++ b/arch/mn10300/include/asm/resource.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/rtc-regs.h b/arch/mn10300/include/asm/rtc-regs.h new file mode 100644 index 0000000..c42deef --- /dev/null +++ b/arch/mn10300/include/asm/rtc-regs.h @@ -0,0 +1,86 @@ +/* MN10300 on-chip Real-Time Clock registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_RTC_REGS_H +#define _ASM_RTC_REGS_H + +#include + +#ifdef __KERNEL__ + +#define RTSCR __SYSREG(0xd8600000, u8) /* RTC seconds count reg */ +#define RTSAR __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */ +#define RTMCR __SYSREG(0xd8600002, u8) /* RTC minutes count reg */ +#define RTMAR __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */ +#define RTHCR __SYSREG(0xd8600004, u8) /* RTC hours count reg */ +#define RTHAR __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */ +#define RTDWCR __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */ +#define RTDMCR __SYSREG(0xd8600007, u8) /* RTC days count reg */ +#define RTMTCR __SYSREG(0xd8600008, u8) /* RTC months count reg */ +#define RTYCR __SYSREG(0xd8600009, u8) /* RTC years count reg */ + +#define RTCRA __SYSREG(0xd860000a, u8)/* RTC control reg A */ +#define RTCRA_RS 0x0f /* periodic timer interrupt cycle setting */ +#define RTCRA_RS_NONE 0x00 /* - off */ +#define RTCRA_RS_3_90625ms 0x01 /* - 3.90625ms (1/256s) */ +#define RTCRA_RS_7_8125ms 0x02 /* - 7.8125ms (1/128s) */ +#define RTCRA_RS_122_070us 0x03 /* - 122.070us (1/8192s) */ +#define RTCRA_RS_244_141us 0x04 /* - 244.141us (1/4096s) */ +#define RTCRA_RS_488_281us 0x05 /* - 488.281us (1/2048s) */ +#define RTCRA_RS_976_5625us 0x06 /* - 976.5625us (1/1024s) */ +#define RTCRA_RS_1_953125ms 0x07 /* - 1.953125ms (1/512s) */ +#define RTCRA_RS_3_90624ms 0x08 /* - 3.90624ms (1/256s) */ +#define RTCRA_RS_7_8125ms_b 0x09 /* - 7.8125ms (1/128s) */ +#define RTCRA_RS_15_625ms 0x0a /* - 15.625ms (1/64s) */ +#define RTCRA_RS_31_25ms 0x0b /* - 31.25ms (1/32s) */ +#define RTCRA_RS_62_5ms 0x0c /* - 62.5ms (1/16s) */ +#define RTCRA_RS_125ms 0x0d /* - 125ms (1/8s) */ +#define RTCRA_RS_250ms 0x0e /* - 250ms (1/4s) */ +#define RTCRA_RS_500ms 0x0f /* - 500ms (1/2s) */ +#define RTCRA_DVR 0x40 /* divider reset */ +#define RTCRA_UIP 0x80 /* clock update flag */ + +#define RTCRB __SYSREG(0xd860000b, u8) /* RTC control reg B */ +#define RTCRB_DSE 0x01 /* daylight savings time enable */ +#define RTCRB_TM 0x02 /* time format */ +#define RTCRB_TM_12HR 0x00 /* - 12 hour format */ +#define RTCRB_TM_24HR 0x02 /* - 24 hour format */ +#define RTCRB_DM 0x04 /* numeric value format */ +#define RTCRB_DM_BCD 0x00 /* - BCD */ +#define RTCRB_DM_BINARY 0x04 /* - binary */ +#define RTCRB_UIE 0x10 /* update interrupt disable */ +#define RTCRB_AIE 0x20 /* alarm interrupt disable */ +#define RTCRB_PIE 0x40 /* periodic interrupt disable */ +#define RTCRB_SET 0x80 /* clock update enable */ + +#define RTSRC __SYSREG(0xd860000c, u8) /* RTC status reg C */ +#define RTSRC_UF 0x10 /* update end interrupt flag */ +#define RTSRC_AF 0x20 /* alarm interrupt flag */ +#define RTSRC_PF 0x40 /* periodic interrupt flag */ +#define RTSRC_IRQF 0x80 /* interrupt flag */ + +#define RTIRQ 32 +#define RTICR GxICR(RTIRQ) + +/* + * MC146818 RTC compatibility defs for the MN10300 on-chip RTC + */ +#define RTC_PORT(x) 0xd8600000 +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ + +#define CMOS_READ(addr) __SYSREG(0xd8600000 + (addr), u8) +#define CMOS_WRITE(val, addr) \ + do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0) + +#define RTC_IRQ RTIRQ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_RTC_REGS_H */ diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h new file mode 100644 index 0000000..c295194 --- /dev/null +++ b/arch/mn10300/include/asm/rtc.h @@ -0,0 +1,41 @@ +/* MN10300 Real time clock definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_RTC_H +#define _ASM_RTC_H + +#ifdef CONFIG_MN10300_RTC + +#include + +extern void check_rtc_time(void); +extern void __init calibrate_clock(void); +extern unsigned long __init get_initial_rtc_time(void); + +#else /* !CONFIG_MN10300_RTC */ + +static inline void check_rtc_time(void) +{ +} + +static inline void calibrate_clock(void) +{ +} + +static inline unsigned long get_initial_rtc_time(void) +{ + return 0; +} + +#endif /* !CONFIG_MN10300_RTC */ + +#include + +#endif /* _ASM_RTC_H */ diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h new file mode 100644 index 0000000..6753590 --- /dev/null +++ b/arch/mn10300/include/asm/scatterlist.h @@ -0,0 +1,55 @@ +/* MN10300 Scatterlist definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SCATTERLIST_H +#define _ASM_SCATTERLIST_H + +#include + +/* + * Drivers must set either ->address or (preferred) page and ->offset + * to indicate where data must be transferred to/from. + * + * Using page is recommended since it handles highmem data as well as + * low mem. ->address is restricted to data which has a virtual mapping, and + * it will go away in the future. Updating to page can be automated very + * easily -- something like + * + * sg->address = some_ptr; + * + * can be rewritten as + * + * sg_set_page(virt_to_page(some_ptr)); + * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK; + * + * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens + */ +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; /* for highmem, page offset */ + dma_addr_t dma_address; + unsigned int length; +}; + +#define ISA_DMA_THRESHOLD (0x00ffffff) + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#endif /* _ASM_SCATTERLIST_H */ diff --git a/arch/mn10300/include/asm/sections.h b/arch/mn10300/include/asm/sections.h new file mode 100644 index 0000000..2b8c516 --- /dev/null +++ b/arch/mn10300/include/asm/sections.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/sembuf.h b/arch/mn10300/include/asm/sembuf.h new file mode 100644 index 0000000..301f3f9 --- /dev/null +++ b/arch/mn10300/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _ASM_SEMBUF_H +#define _ASM_SEMBUF_H + +/* + * The semid64_ds structure for MN10300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SEMBUF_H */ diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h new file mode 100644 index 0000000..6498469 --- /dev/null +++ b/arch/mn10300/include/asm/serial-regs.h @@ -0,0 +1,160 @@ +/* MN10300 on-board serial port module registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_SERIAL_REGS_H +#define _ASM_SERIAL_REGS_H + +#include +#include + +#ifdef __KERNEL__ + +/* serial port 0 */ +#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */ +#define SC01CTR_CK 0x0007 /* clock source select */ +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ +#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ +#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */ +#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */ +#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#define SC01CTR_STB 0x0008 /* stop bit select */ +#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */ +#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */ +#define SC01CTR_PB 0x0070 /* parity bit select */ +#define SC01CTR_PB_NONE 0x0000 /* - no parity */ +#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ +#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ +#define SC01CTR_PB_EVEN 0x0060 /* - even parity */ +#define SC01CTR_PB_ODD 0x0070 /* - odd parity */ +#define SC01CTR_CLN 0x0080 /* character length */ +#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ +#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ +#define SC01CTR_TOE 0x0100 /* T input output enable */ +#define SC01CTR_OD 0x0200 /* bit order select */ +#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */ +#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */ +#define SC01CTR_MD 0x0c00 /* mode select */ +#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */ +#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */ +#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */ +#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */ +#define SC01CTR_IIC 0x1000 /* I2C mode select */ +#define SC01CTR_BKE 0x2000 /* break transmit enable */ +#define SC01CTR_RXE 0x4000 /* receive enable */ +#define SC01CTR_TXE 0x8000 /* transmit enable */ + +#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */ +#define SC01ICR_DMD 0x80 /* output data mode */ +#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */ +#define SC01ICR_TI 0x10 /* transmit interrupt cause */ +#define SC01ICR_RES 0x04 /* receive error select */ +#define SC01ICR_RI 0x01 /* receive interrupt cause */ + +#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */ +#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */ + +#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */ +#define SC01STR_OEF 0x0001 /* overrun error found */ +#define SC01STR_PEF 0x0002 /* parity error found */ +#define SC01STR_FEF 0x0004 /* framing error found */ +#define SC01STR_RBF 0x0010 /* receive buffer status */ +#define SC01STR_TBF 0x0020 /* transmit buffer status */ +#define SC01STR_RXF 0x0040 /* receive status */ +#define SC01STR_TXF 0x0080 /* transmit status */ +#define SC01STR_STF 0x0100 /* I2C start sequence found */ +#define SC01STR_SPF 0x0200 /* I2C stop sequence found */ + +#define SC0RXIRQ 20 /* timer 0 Receive IRQ */ +#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */ + +#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */ +#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */ + +/* serial port 1 */ +#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */ +#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */ +#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ +#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ +#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */ + +#define SC1RXIRQ 22 /* timer 1 Receive IRQ */ +#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */ + +#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */ +#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */ + +/* serial port 2 */ +#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */ +#define SC2CTR_CK 0x0003 /* clock source select */ +#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */ +#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */ +#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */ +#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */ +#define SC2CTR_STB 0x0008 /* stop bit select */ +#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */ +#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */ +#define SC2CTR_PB 0x0070 /* parity bit select */ +#define SC2CTR_PB_NONE 0x0000 /* - no parity */ +#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ +#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ +#define SC2CTR_PB_EVEN 0x0060 /* - even parity */ +#define SC2CTR_PB_ODD 0x0070 /* - odd parity */ +#define SC2CTR_CLN 0x0080 /* character length */ +#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ +#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ +#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */ +#define SC2CTR_OD 0x0200 /* bit order select */ +#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */ +#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */ +#define SC2CTR_TWS 0x1000 /* transmit wait select */ +#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */ +#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */ +#define SC2CTR_BKE 0x2000 /* break transmit enable */ +#define SC2CTR_RXE 0x4000 /* receive enable */ +#define SC2CTR_TXE 0x8000 /* transmit enable */ + +#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */ +#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */ +#define SC2ICR_TI 0x10 /* transmit interrupt cause */ +#define SC2ICR_RES 0x04 /* receive error select */ +#define SC2ICR_RI 0x01 /* receive interrupt cause */ + +#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ +#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ +#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */ +#define SC2STR_OEF 0x0001 /* overrun error found */ +#define SC2STR_PEF 0x0002 /* parity error found */ +#define SC2STR_FEF 0x0004 /* framing error found */ +#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */ +#define SC2STR_RBF 0x0010 /* receive buffer status */ +#define SC2STR_TBF 0x0020 /* transmit buffer status */ +#define SC2STR_RXF 0x0040 /* receive status */ +#define SC2STR_TXF 0x0080 /* transmit status */ + +#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */ + +#define SC2RXIRQ 24 /* serial 2 Receive IRQ */ +#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */ + +#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */ +#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */ + + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SERIAL_REGS_H */ diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h new file mode 100644 index 0000000..99785a9 --- /dev/null +++ b/arch/mn10300/include/asm/serial.h @@ -0,0 +1,36 @@ +/* Standard UART definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +/* + * The ASB2305 has an 18.432 MHz clock the UART + */ +#define BASE_BAUD (18432000 / 16) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#ifdef CONFIG_SERIAL_MANY_PORTS +#define FOURPORT_FLAGS ASYNC_FOURPORT +#define ACCENT_FLAGS 0 +#define BOCA_FLAGS 0 +#define HUB6_FLAGS 0 +#define RS_TABLE_SIZE 64 +#else +#define RS_TABLE_SIZE +#endif + +#include diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h new file mode 100644 index 0000000..08356c8 --- /dev/null +++ b/arch/mn10300/include/asm/setup.h @@ -0,0 +1,17 @@ +/* MN10300 Setup declarations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SETUP_H +#define _ASM_SETUP_H + +extern void __init unit_setup(void); +extern void __init unit_init_IRQ(void); + +#endif /* _ASM_SETUP_H */ diff --git a/arch/mn10300/include/asm/shmbuf.h b/arch/mn10300/include/asm/shmbuf.h new file mode 100644 index 0000000..8f300cc --- /dev/null +++ b/arch/mn10300/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _ASM_SHMBUF_H +#define _ASM_SHMBUF_H + +/* + * The shmid64_ds structure for MN10300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SHMBUF_H */ diff --git a/arch/mn10300/include/asm/shmparam.h b/arch/mn10300/include/asm/shmparam.h new file mode 100644 index 0000000..ab666ed --- /dev/null +++ b/arch/mn10300/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _ASM_SHMPARAM_H +#define _ASM_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_SHMPARAM_H */ diff --git a/arch/mn10300/include/asm/sigcontext.h b/arch/mn10300/include/asm/sigcontext.h new file mode 100644 index 0000000..4de3aff --- /dev/null +++ b/arch/mn10300/include/asm/sigcontext.h @@ -0,0 +1,52 @@ +/* MN10300 Userspace signal context + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SIGCONTEXT_H +#define _ASM_SIGCONTEXT_H + +struct fpucontext { + /* Regular FPU environment */ + unsigned long fs[32]; /* fpu registers */ + unsigned long fpcr; /* fpu control register */ +}; + +struct sigcontext { + unsigned long d0; + unsigned long d1; + unsigned long d2; + unsigned long d3; + unsigned long a0; + unsigned long a1; + unsigned long a2; + unsigned long a3; + unsigned long e0; + unsigned long e1; + unsigned long e2; + unsigned long e3; + unsigned long e4; + unsigned long e5; + unsigned long e6; + unsigned long e7; + unsigned long lar; + unsigned long lir; + unsigned long mdr; + unsigned long mcvf; + unsigned long mcrl; + unsigned long mcrh; + unsigned long mdrq; + unsigned long sp; + unsigned long epsw; + unsigned long pc; + struct fpucontext *fpucontext; + unsigned long oldmask; +}; + + +#endif /* _ASM_SIGCONTEXT_H */ diff --git a/arch/mn10300/include/asm/siginfo.h b/arch/mn10300/include/asm/siginfo.h new file mode 100644 index 0000000..0815d29 --- /dev/null +++ b/arch/mn10300/include/asm/siginfo.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h new file mode 100644 index 0000000..e98817c --- /dev/null +++ b/arch/mn10300/include/asm/signal.h @@ -0,0 +1,171 @@ +/* MN10300 Signal definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SIGNAL_H +#define _ASM_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001U +#define SA_NOCLDWAIT 0x00000002U +#define SA_SIGINFO 0x00000004U +#define SA_ONSTACK 0x08000000U +#define SA_RESTART 0x10000000U +#define SA_NODEFER 0x40000000U +#define SA_RESETHAND 0x80000000U + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include + + +struct pt_regs; +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SIGNAL_H */ diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h new file mode 100644 index 0000000..4eb8c61 --- /dev/null +++ b/arch/mn10300/include/asm/smp.h @@ -0,0 +1,18 @@ +/* MN10300 SMP support + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SMP_H +#define _ASM_SMP_H + +#ifdef CONFIG_SMP +#error SMP not yet supported for MN10300 +#endif + +#endif diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h new file mode 100644 index 0000000..fb5daf4 --- /dev/null +++ b/arch/mn10300/include/asm/socket.h @@ -0,0 +1,60 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/mn10300/include/asm/sockios.h b/arch/mn10300/include/asm/sockios.h new file mode 100644 index 0000000..b03043a --- /dev/null +++ b/arch/mn10300/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef _ASM_SOCKIOS_H +#define _ASM_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_SOCKIOS_H */ diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h new file mode 100644 index 0000000..4bf9c8b --- /dev/null +++ b/arch/mn10300/include/asm/spinlock.h @@ -0,0 +1,16 @@ +/* MN10300 spinlock support + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SPINLOCK_H +#define _ASM_SPINLOCK_H + +#error SMP spinlocks not implemented for MN10300 + +#endif /* _ASM_SPINLOCK_H */ diff --git a/arch/mn10300/include/asm/stat.h b/arch/mn10300/include/asm/stat.h new file mode 100644 index 0000000..63ff837 --- /dev/null +++ b/arch/mn10300/include/asm/stat.h @@ -0,0 +1,78 @@ +#ifndef _ASM_STAT_H +#define _ASM_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned int st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#define STAT_HAVE_NSEC 1 + +#endif /* _ASM_STAT_H */ diff --git a/arch/mn10300/include/asm/statfs.h b/arch/mn10300/include/asm/statfs.h new file mode 100644 index 0000000..0b91fe1 --- /dev/null +++ b/arch/mn10300/include/asm/statfs.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/string.h b/arch/mn10300/include/asm/string.h new file mode 100644 index 0000000..47dbd43 --- /dev/null +++ b/arch/mn10300/include/asm/string.h @@ -0,0 +1,32 @@ +/* MN10300 Optimised string functions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Modified by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_STRING_H +#define _ASM_STRING_H + +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMMOVE + +extern void *memset(void *dest, int ch, size_t count); +extern void *memcpy(void *dest, const void *src, size_t count); +extern void *memmove(void *dest, const void *src, size_t count); + + +extern void __struct_cpy_bug(void); +#define struct_cpy(x, y) \ +({ \ + if (sizeof(*(x)) != sizeof(*(y))) \ + __struct_cpy_bug; \ + memcpy(x, y, sizeof(*(x))); \ +}) + +#endif /* _ASM_STRING_H */ diff --git a/arch/mn10300/include/asm/swab.h b/arch/mn10300/include/asm/swab.h new file mode 100644 index 0000000..bd818a8 --- /dev/null +++ b/arch/mn10300/include/asm/swab.h @@ -0,0 +1,42 @@ +/* MN10300 Byte-order primitive construction + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SWAB_H +#define _ASM_SWAB_H + +#include + +#ifdef __GNUC__ + +static inline __attribute__((const)) +__u32 __arch_swab32(__u32 x) +{ + __u32 ret; + asm("swap %1,%0" : "=r" (ret) : "r" (x)); + return ret; +} +#define __arch_swab32 __arch_swab32 + +static inline __attribute__((const)) +__u16 __arch_swab16(__u16 x) +{ + __u16 ret; + asm("swaph %1,%0" : "=r" (ret) : "r" (x)); + return ret; +} +#define __arch_swab32 __arch_swab32 + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __SWAB_64_THRU_32__ +#endif + +#endif /* __GNUC__ */ + +#endif /* _ASM_SWAB_H */ diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h new file mode 100644 index 0000000..8214fb7 --- /dev/null +++ b/arch/mn10300/include/asm/system.h @@ -0,0 +1,237 @@ +/* MN10300 System definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SYSTEM_H +#define _ASM_SYSTEM_H + +#include + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include + +struct task_struct; +struct thread_struct; + +extern asmlinkage +struct task_struct *__switch_to(struct thread_struct *prev, + struct thread_struct *next, + struct task_struct *prev_task); + +/* context switching is now performed out-of-line in switch_to.S */ +#define switch_to(prev, next, last) \ +do { \ + current->thread.wchan = (u_long) __builtin_return_address(0); \ + (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ + mb(); \ + current->thread.wchan = 0; \ +} while (0) + +#define arch_align_stack(x) (x) + +#define nop() asm volatile ("nop") + +#endif /* !__ASSEMBLY__ */ + +/* + * Force strict CPU ordering. + * And yes, this is required on UP too when we're talking + * to devices. + * + * For now, "wmb()" doesn't actually do anything, as all + * Intel CPU's follow what Intel calls a *Processor Order*, + * in which all writes are seen in the program order even + * outside the CPU. + * + * I expect future Intel CPU's to have a weaker ordering, + * but I'd also expect them to finally get their act together + * and add some real memory barriers if so. + * + * Some non intel clones support out of order store. wmb() ceases to be a + * nop for these. + */ + +#define mb() asm volatile ("": : :"memory") +#define rmb() mb() +#define wmb() asm volatile ("": : :"memory") + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#endif + +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +#define read_barrier_depends() do {} while (0) +#define smp_read_barrier_depends() do {} while (0) + +/*****************************************************************************/ +/* + * interrupt control + * - "disabled": run in IM1/2 + * - level 0 - GDB stub + * - level 1 - virtual serial DMA (if present) + * - level 5 - normal interrupt priority + * - level 6 - timer interrupt + * - "enabled": run in IM7 + */ +#ifdef CONFIG_MN10300_TTYSM +#define MN10300_CLI_LEVEL EPSW_IM_2 +#else +#define MN10300_CLI_LEVEL EPSW_IM_1 +#endif + +#define local_save_flags(x) \ +do { \ + typecheck(unsigned long, x); \ + asm volatile( \ + " mov epsw,%0 \n" \ + : "=d"(x) \ + ); \ +} while (0) + +#define local_irq_disable() \ +do { \ + asm volatile( \ + " and %0,epsw \n" \ + " or %1,epsw \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + : \ + : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \ + ); \ +} while (0) + +#define local_irq_save(x) \ +do { \ + local_save_flags(x); \ + local_irq_disable(); \ +} while (0) + +/* + * we make sure local_irq_enable() doesn't cause priority inversion + */ +#ifndef __ASSEMBLY__ + +extern unsigned long __mn10300_irq_enabled_epsw; + +#endif + +#define local_irq_enable() \ +do { \ + unsigned long tmp; \ + \ + asm volatile( \ + " mov epsw,%0 \n" \ + " and %1,%0 \n" \ + " or %2,%0 \n" \ + " mov %0,epsw \n" \ + : "=&d"(tmp) \ + : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \ + ); \ +} while (0) + +#define local_irq_restore(x) \ +do { \ + typecheck(unsigned long, x); \ + asm volatile( \ + " mov %0,epsw \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + : \ + : "d"(x) \ + : "memory", "cc" \ + ); \ +} while (0) + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \ +}) + +/* hook to save power by halting the CPU + * - called from the idle loop + * - must reenable interrupts (which takes three instruction cycles to complete) + */ +#define safe_halt() \ +do { \ + asm volatile(" or %0,epsw \n" \ + " nop \n" \ + " nop \n" \ + " bset %2,(%1) \n" \ + : \ + : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\ + : "cc" \ + ); \ +} while (0) + +#define STI or EPSW_IE|EPSW_IM,epsw +#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop + +/*****************************************************************************/ +/* + * MN10300 doesn't actually have an exchange instruction + */ +#ifndef __ASSEMBLY__ + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + +static inline +unsigned long __xchg(volatile unsigned long *m, unsigned long val) +{ + unsigned long retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + *m = val; + local_irq_restore(flags); + return retval; +} + +#define xchg(ptr, v) \ + ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ + (unsigned long)(v))) + +static inline unsigned long __cmpxchg(volatile unsigned long *m, + unsigned long old, unsigned long new) +{ + unsigned long retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + if (retval == old) + *m = new; + local_irq_restore(flags); + return retval; +} + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ + (unsigned long)(o), \ + (unsigned long)(n))) + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_SYSTEM_H */ diff --git a/arch/mn10300/include/asm/termbits.h b/arch/mn10300/include/asm/termbits.h new file mode 100644 index 0000000..eb2b0dc --- /dev/null +++ b/arch/mn10300/include/asm/termbits.h @@ -0,0 +1,200 @@ +#ifndef _ASM_TERMBITS_H +#define _ASM_TERMBITS_H + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CTVB 004000000000 /* VisioBraille Terminal flow control */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_TERMBITS_H */ diff --git a/arch/mn10300/include/asm/termios.h b/arch/mn10300/include/asm/termios.h new file mode 100644 index 0000000..dd7cf61 --- /dev/null +++ b/arch/mn10300/include/asm/termios.h @@ -0,0 +1,92 @@ +#ifndef _ASM_TERMIOS_H +#define _ASM_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */ + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp, &(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) \ + copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) \ + copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) \ + copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) \ + copy_to_user(u, k, sizeof(struct termios)) + +#endif /* _ASM_TERMIOS_H */ diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h new file mode 100644 index 0000000..78a3881 --- /dev/null +++ b/arch/mn10300/include/asm/thread_info.h @@ -0,0 +1,170 @@ +/* MN10300 Low-level thread information + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#include + +#ifndef __ASSEMBLY__ +#include +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE (4096) +#else +#define THREAD_SIZE (8192) +#endif + +#define STACK_WARN (THREAD_SIZE / 8) + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants + * must also be changed + */ +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + __u32 cpu; /* current CPU */ + __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ + + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF for user-thead + 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + + __u8 supervisor_stack[0]; +}; + +#else /* !__ASSEMBLY__ */ + +#ifndef __ASM_OFFSETS_H__ +#include +#endif + +#endif + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) +#define init_uregs \ + ((struct pt_regs *) \ + ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs))) + +extern struct thread_info *__current_ti; + +/* how to get the thread information struct from C */ +static inline __attribute__((const)) +struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + asm("mov sp,%0\n" + "and %1,%0\n" + : "=d" (ti) + : "i" (~(THREAD_SIZE - 1)) + : "cc"); + return ti; +} + +/* how to get the current stack pointer from C */ +static inline unsigned long current_stack_pointer(void) +{ + unsigned long sp; + asm("mov sp,%0; ":"=r" (sp)); + return sp; +} + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL) +#else +#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif + +#define free_thread_info(ti) kfree((ti)) +#define get_thread_info(ti) get_task_struct((ti)->task) +#define put_thread_info(ti) put_task_struct((ti)->task) + +#else /* !__ASSEMBLY__ */ + +#ifndef __VMLINUX_LDS__ +/* how to get the thread information struct from ASM */ +.macro GET_THREAD_INFO reg + mov sp,\reg + and -THREAD_SIZE,\reg +.endm +#endif +#endif + +/* + * thread information flags + * - these are process state flags that various assembly files may need to + * access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ +#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ +#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 17 /* OOM killer killed process */ +#define TIF_FREEZE 18 /* freezing for suspend */ + +#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE) +#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME) +#define _TIF_SIGPENDING +(1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED +(1 << TIF_NEED_RESCHED) +#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP) +#define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK) +#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG) +#define _TIF_FREEZE +(1 << TIF_FREEZE) + +#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ +#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h new file mode 100644 index 0000000..1d883b7 --- /dev/null +++ b/arch/mn10300/include/asm/timer-regs.h @@ -0,0 +1,293 @@ +/* AM33v2 on-board timer module registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_TIMER_REGS_H +#define _ASM_TIMER_REGS_H + +#include +#include + +#ifdef __KERNEL__ + +/* timer prescalar control */ +#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */ +#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */ +#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */ + +/* 8 bit timers */ +#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */ +#define TM0MD_SRC 0x07 /* timer source */ +#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ +#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */ +#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM1MD __SYSREG(0xd4003001, u8) /* timer 1 mode register */ +#define TM1MD_SRC 0x07 /* timer source */ +#define TM1MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM1MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM1MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */ +#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */ +#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM2MD __SYSREG(0xd4003002, u8) /* timer 2 mode register */ +#define TM2MD_SRC 0x07 /* timer source */ +#define TM2MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM2MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM2MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */ +#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */ +#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM3MD __SYSREG(0xd4003003, u8) /* timer 3 mode register */ +#define TM3MD_SRC 0x07 /* timer source */ +#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */ +#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */ +#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM01MD __SYSREG(0xd4003000, u16) /* timer 0:1 mode register */ + +#define TM0BR __SYSREG(0xd4003010, u8) /* timer 0 base register */ +#define TM1BR __SYSREG(0xd4003011, u8) /* timer 1 base register */ +#define TM2BR __SYSREG(0xd4003012, u8) /* timer 2 base register */ +#define TM3BR __SYSREG(0xd4003013, u8) /* timer 3 base register */ +#define TM01BR __SYSREG(0xd4003010, u16) /* timer 0:1 base register */ + +#define TM0BC __SYSREGC(0xd4003020, u8) /* timer 0 binary counter */ +#define TM1BC __SYSREGC(0xd4003021, u8) /* timer 1 binary counter */ +#define TM2BC __SYSREGC(0xd4003022, u8) /* timer 2 binary counter */ +#define TM3BC __SYSREGC(0xd4003023, u8) /* timer 3 binary counter */ +#define TM01BC __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */ + +#define TM0IRQ 2 /* timer 0 IRQ */ +#define TM1IRQ 3 /* timer 1 IRQ */ +#define TM2IRQ 4 /* timer 2 IRQ */ +#define TM3IRQ 5 /* timer 3 IRQ */ + +#define TM0ICR GxICR(TM0IRQ) /* timer 0 uflow intr ctrl reg */ +#define TM1ICR GxICR(TM1IRQ) /* timer 1 uflow intr ctrl reg */ +#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */ +#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */ + +/* 16-bit timers 4,5 & 7-11 */ +#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */ +#define TM4MD_SRC 0x07 /* timer source */ +#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM4MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM4MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */ +#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM5MD __SYSREG(0xd4003082, u8) /* timer 5 mode register */ +#define TM5MD_SRC 0x07 /* timer source */ +#define TM5MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM5MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM5MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM5MD_SRC_TM4CASCADE 0x03 /* - cascade with timer 4 */ +#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */ +#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM7MD __SYSREG(0xd4003086, u8) /* timer 7 mode register */ +#define TM7MD_SRC 0x07 /* timer source */ +#define TM7MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM7MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM7MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */ +#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM8MD __SYSREG(0xd4003088, u8) /* timer 8 mode register */ +#define TM8MD_SRC 0x07 /* timer source */ +#define TM8MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM8MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM8MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM8MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ +#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */ +#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM9MD __SYSREG(0xd400308a, u8) /* timer 9 mode register */ +#define TM9MD_SRC 0x07 /* timer source */ +#define TM9MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM9MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM9MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM9MD_SRC_TM8CASCADE 0x03 /* - cascade with timer 8 */ +#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */ +#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM10MD __SYSREG(0xd400308c, u8) /* timer 10 mode register */ +#define TM10MD_SRC 0x07 /* timer source */ +#define TM10MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM10MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM10MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM10MD_SRC_TM9CASCADE 0x03 /* - cascade with timer 9 */ +#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */ +#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM11MD __SYSREG(0xd400308e, u8) /* timer 11 mode register */ +#define TM11MD_SRC 0x07 /* timer source */ +#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ +#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */ +#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */ +#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */ +#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */ +#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */ +#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */ +#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */ +#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */ +#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ + +#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */ +#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */ +#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */ + +#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */ +#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */ +#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */ +#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */ +#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */ + +#define TM4IRQ 6 /* timer 4 IRQ */ +#define TM5IRQ 7 /* timer 5 IRQ */ +#define TM7IRQ 11 /* timer 7 IRQ */ +#define TM8IRQ 12 /* timer 8 IRQ */ +#define TM9IRQ 13 /* timer 9 IRQ */ +#define TM10IRQ 14 /* timer 10 IRQ */ +#define TM11IRQ 15 /* timer 11 IRQ */ + +#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */ +#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */ +#define TM7ICR GxICR(TM7IRQ) /* timer 7 uflow intr ctrl reg */ +#define TM8ICR GxICR(TM8IRQ) /* timer 8 uflow intr ctrl reg */ +#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */ +#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */ +#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */ + +/* 16-bit timer 6 */ +#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */ +#define TM6MD_SRC 0x0007 /* timer source */ +#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */ +#define TM6MD_SRC_IOCLK_8 0x0001 /* - 1/8 IOCLK */ +#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */ +#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */ +#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */ +#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */ +#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */ +#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */ +#define TM6MD_PWM 0x3800 /* PWM output mode */ +#define TM6MD_PWM_DIS 0x0000 /* - disabled */ +#define TM6MD_PWM_10BIT 0x1000 /* - 10 bits mode */ +#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */ +#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */ +#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */ +#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */ +#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */ + +#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */ +#define TM6MDA_OUT 0x07 /* output select */ +#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */ +#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */ +#define TM6MDA_OUT_SETA 0x02 /* - set at match A */ +#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */ +#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */ +#define TM6MDA_MODE 0xc0 /* compare A register mode */ +#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ +#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ +#define TM6MDA_EDGE 0x20 /* compare A edge select */ +#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */ +#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */ +#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */ + +#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */ +#define TM6MDB_OUT 0x07 /* output select */ +#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */ +#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */ +#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */ +#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */ +#define TM6MDB_MODE 0xc0 /* compare B register mode */ +#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ +#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ +#define TM6MDB_EDGE 0x20 /* compare B edge select */ +#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */ +#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */ +#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */ + +#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */ +#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */ +#define TM6BC __SYSREG(0xd40030a4, u16) /* timer6 binary counter */ + +#define TM6IRQ 6 /* timer 6 IRQ */ +#define TM6AIRQ 9 /* timer 6A IRQ */ +#define TM6BIRQ 10 /* timer 6B IRQ */ + +#define TM6ICR GxICR(TM6IRQ) /* timer 6 uflow intr ctrl reg */ +#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */ +#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h new file mode 100644 index 0000000..3944277 --- /dev/null +++ b/arch/mn10300/include/asm/timex.h @@ -0,0 +1,33 @@ +/* MN10300 Architecture time management specifications + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_TIMEX_H +#define _ASM_TIMEX_H + +#include +#include + +#define TICK_SIZE (tick_nsec / 1000) + +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set + * to something appropriate, but what? */ + +extern cycles_t cacheflush_time; + +#ifdef __KERNEL__ + +static inline cycles_t get_cycles(void) +{ + return read_timestamp_counter(); +} + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TIMEX_H */ diff --git a/arch/mn10300/include/asm/tlb.h b/arch/mn10300/include/asm/tlb.h new file mode 100644 index 0000000..65d232b --- /dev/null +++ b/arch/mn10300/include/asm/tlb.h @@ -0,0 +1,34 @@ +/* MN10300 TLB definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_TLB_H +#define _ASM_TLB_H + +#include + +extern void check_pgt_cache(void); + +/* + * we don't need any special per-pte or per-vma handling... + */ +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it fills up + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +/* for now, just use the generic stuff */ +#include + +#endif /* _ASM_TLB_H */ diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h new file mode 100644 index 0000000..e023986 --- /dev/null +++ b/arch/mn10300/include/asm/tlbflush.h @@ -0,0 +1,80 @@ +/* MN10300 TLB flushing functions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_TLBFLUSH_H +#define _ASM_TLBFLUSH_H + +#include + +#define __flush_tlb() \ +do { \ + int w; \ + __asm__ __volatile__ \ + (" mov %1,%0 \n" \ + " or %2,%0 \n" \ + " mov %0,%1 \n" \ + : "=d"(w) \ + : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \ + : "memory" \ + ); \ +} while (0) + +#define __flush_tlb_all() __flush_tlb() +#define __flush_tlb_one(addr) __flush_tlb() + + +/* + * TLB flushing: + * + * - flush_tlb() flushes the current mm struct TLBs + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(mm, start, end) flushes a range of pages + * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables + */ +#define flush_tlb_all() \ +do { \ + preempt_disable(); \ + __flush_tlb_all(); \ + preempt_enable(); \ +} while (0) + +#define flush_tlb_mm(mm) \ +do { \ + preempt_disable(); \ + __flush_tlb_all(); \ + preempt_enable(); \ +} while (0) + +#define flush_tlb_range(vma, start, end) \ +do { \ + unsigned long __s __attribute__((unused)) = (start); \ + unsigned long __e __attribute__((unused)) = (end); \ + preempt_disable(); \ + __flush_tlb_all(); \ + preempt_enable(); \ +} while (0) + + +#define __flush_tlb_global() flush_tlb_all() +#define flush_tlb() flush_tlb_all() +#define flush_tlb_kernel_range(start, end) \ +do { \ + unsigned long __s __attribute__((unused)) = (start); \ + unsigned long __e __attribute__((unused)) = (end); \ + flush_tlb_all(); \ +} while (0) + +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr); + +#define flush_tlb_pgtables(mm, start, end) do {} while (0) + +#endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/mn10300/include/asm/topology.h b/arch/mn10300/include/asm/topology.h new file mode 100644 index 0000000..5428f33 --- /dev/null +++ b/arch/mn10300/include/asm/topology.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h new file mode 100644 index 0000000..7b9f010 --- /dev/null +++ b/arch/mn10300/include/asm/types.h @@ -0,0 +1,38 @@ +/* MN10300 Basic type definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_TYPES_H +#define _ASM_TYPES_H + +#include + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ +typedef u32 dma_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TYPES_H */ diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h new file mode 100644 index 0000000..8a3a4dd --- /dev/null +++ b/arch/mn10300/include/asm/uaccess.h @@ -0,0 +1,490 @@ +/* MN10300 userspace access functions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF) +#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF) +#define USER_DS MAKE_MM_SEG(TASK_SIZE) + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) +#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF) + +#define segment_eq(a, b) ((a).seg == (b).seg) + +#define __addr_ok(addr) \ + ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) + +/* + * check that a range of addresses falls within the current address limit + */ +static inline int ___range_ok(unsigned long addr, unsigned int size) +{ + int flag = 1, tmp; + + asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */ + " bcs 0f \n" + " cmp %4,%1 \n" /* jump if addr+size>limit (error) */ + " bhi 0f \n" + " clr %0 \n" /* mark okay */ + "0: \n" + : "=r"(flag), "=&r"(tmp) + : "1"(addr), "ir"(size), + "r"(current_thread_info()->addr_limit.seg), "0"(flag) + : "cc" + ); + + return flag; +} + +#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size)) + +#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) +#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0) + +static inline int verify_area(int type, const void *addr, unsigned long size) +{ + return access_ok(type, addr, size) ? 0 : -EFAULT; +} + + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern int fixup_exception(struct pt_regs *regs); + +#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) +#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +/* + * The "xxx_ret" versions return constant specified in third argument, if + * something bad happens. These macros can be optimized for the + * case of just returning from the function xxx_ret is used. + */ + +#define put_user_ret(x, ptr, ret) \ + ({ if (put_user((x), (ptr))) return (ret); }) +#define get_user_ret(x, ptr, ret) \ + ({ if (get_user((x), (ptr))) return (ret); }) +#define __put_user_ret(x, ptr, ret) \ + ({ if (__put_user((x), (ptr))) return (ret); }) +#define __get_user_ret(x, ptr, ret) \ + ({ if (__get_user((x), (ptr))) return (ret); }) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct *)(x)) + +#define __get_user_nocheck(x, ptr, size) \ +({ \ + __typeof(*(ptr)) __gu_val; \ + unsigned long __gu_addr; \ + int __gu_err; \ + __gu_addr = (unsigned long) (ptr); \ + switch (size) { \ + case 1: __get_user_asm("bu"); break; \ + case 2: __get_user_asm("hu"); break; \ + case 4: __get_user_asm("" ); break; \ + default: __get_user_unknown(); break; \ + } \ + x = (__typeof__(*(ptr))) __gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x, ptr, size) \ +({ \ + __typeof__(*(ptr)) __gu_val; \ + unsigned long __gu_addr; \ + int __gu_err; \ + __gu_addr = (unsigned long) (ptr); \ + if (likely(__access_ok(__gu_addr,size))) { \ + switch (size) { \ + case 1: __get_user_asm("bu"); break; \ + case 2: __get_user_asm("hu"); break; \ + case 4: __get_user_asm("" ); break; \ + default: __get_user_unknown(); break; \ + } \ + } \ + else { \ + __gu_err = -EFAULT; \ + __gu_val = 0; \ + } \ + x = (__typeof__(*(ptr))) __gu_val; \ + __gu_err; \ +}) + +#define __get_user_asm(INSN) \ +({ \ + asm volatile( \ + "1:\n" \ + " mov"INSN" %2,%1\n" \ + " mov 0,%0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3:\n\t" \ + " mov %3,%0\n" \ + " jmp 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "=&r" (__gu_err), "=&r" (__gu_val) \ + : "m" (__m(__gu_addr)), "i" (-EFAULT)); \ +}) + +extern int __get_user_unknown(void); + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + union { \ + __typeof__(*(ptr)) val; \ + u32 bits[2]; \ + } __pu_val; \ + unsigned long __pu_addr; \ + int __pu_err; \ + __pu_val.val = (x); \ + __pu_addr = (unsigned long) (ptr); \ + switch (size) { \ + case 1: __put_user_asm("bu"); break; \ + case 2: __put_user_asm("hu"); break; \ + case 4: __put_user_asm("" ); break; \ + case 8: __put_user_asm8(); break; \ + default: __pu_err = __put_user_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + union { \ + __typeof__(*(ptr)) val; \ + u32 bits[2]; \ + } __pu_val; \ + unsigned long __pu_addr; \ + int __pu_err; \ + __pu_val.val = (x); \ + __pu_addr = (unsigned long) (ptr); \ + if (likely(__access_ok(__pu_addr, size))) { \ + switch (size) { \ + case 1: __put_user_asm("bu"); break; \ + case 2: __put_user_asm("hu"); break; \ + case 4: __put_user_asm("" ); break; \ + case 8: __put_user_asm8(); break; \ + default: __pu_err = __put_user_unknown(); break; \ + } \ + } \ + else { \ + __pu_err = -EFAULT; \ + } \ + __pu_err; \ +}) + +#define __put_user_asm(INSN) \ +({ \ + asm volatile( \ + "1:\n" \ + " mov"INSN" %1,%2\n" \ + " mov 0,%0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3:\n" \ + " mov %3,%0\n" \ + " jmp 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "=&r" (__pu_err) \ + : "r" (__pu_val.val), "m" (__m(__pu_addr)), \ + "i" (-EFAULT) \ + ); \ +}) + +#define __put_user_asm8() \ +({ \ + asm volatile( \ + "1: mov %1,%3 \n" \ + "2: mov %2,%4 \n" \ + " mov 0,%0 \n" \ + "3: \n" \ + " .section .fixup,\"ax\" \n" \ + "4: \n" \ + " mov %5,%0 \n" \ + " jmp 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4 \n" \ + " .long 1b, 4b \n" \ + " .long 2b, 4b \n" \ + " .previous \n" \ + : "=&r" (__pu_err) \ + : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \ + "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \ + "i" (-EFAULT) \ + ); \ +}) + +extern int __put_user_unknown(void); + + +/* + * Copy To/From Userspace + */ +/* Generic arbitrary sized copy. */ +#define __copy_user(to, from, size) \ +do { \ + if (size) { \ + void *__to = to; \ + const void *__from = from; \ + int w; \ + asm volatile( \ + "0: movbu (%0),%3;\n" \ + "1: movbu %3,(%1);\n" \ + " inc %0;\n" \ + " inc %1;\n" \ + " add -1,%2;\n" \ + " bne 0b;\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: jmp 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,3b\n" \ + " .long 1b,3b\n" \ + " .previous\n" \ + : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ + : "0"(__from), "1"(__to), "2"(size) \ + : "memory"); \ + } \ +} while (0) + +#define __copy_user_zeroing(to, from, size) \ +do { \ + if (size) { \ + void *__to = to; \ + const void *__from = from; \ + int w; \ + asm volatile( \ + "0: movbu (%0),%3;\n" \ + "1: movbu %3,(%1);\n" \ + " inc %0;\n" \ + " inc %1;\n" \ + " add -1,%2;\n" \ + " bne 0b;\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3:\n" \ + " mov %2,%0\n" \ + " clr %3\n" \ + "4: movbu %3,(%1);\n" \ + " inc %1;\n" \ + " add -1,%2;\n" \ + " bne 4b;\n" \ + " mov %0,%2\n" \ + " jmp 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,3b\n" \ + " .long 1b,3b\n" \ + " .previous\n" \ + : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ + : "0"(__from), "1"(__to), "2"(size) \ + : "memory"); \ + } \ +} while (0) + +/* We let the __ versions of copy_from/to_user inline, because they're often + * used in fast paths and have only a small space overhead. + */ +static inline +unsigned long __generic_copy_from_user_nocheck(void *to, const void *from, + unsigned long n) +{ + __copy_user_zeroing(to, from, n); + return n; +} + +static inline +unsigned long __generic_copy_to_user_nocheck(void *to, const void *from, + unsigned long n) +{ + __copy_user(to, from, n); + return n; +} + + +#if 0 +#error don't use - these macros don't increment to & from pointers +/* Optimize just a little bit when we know the size of the move. */ +#define __constant_copy_user(to, from, size) \ +do { \ + asm volatile( \ + " mov %0,a0;\n" \ + "0: movbu (%1),d3;\n" \ + "1: movbu d3,(%2);\n" \ + " add -1,a0;\n" \ + " bne 0b;\n" \ + "2:;" \ + ".section .fixup,\"ax\"\n" \ + "3: jmp 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,3b\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : \ + : "d"(size), "d"(to), "d"(from) \ + : "d3", "a0"); \ +} while (0) + +/* Optimize just a little bit when we know the size of the move. */ +#define __constant_copy_user_zeroing(to, from, size) \ +do { \ + asm volatile( \ + " mov %0,a0;\n" \ + "0: movbu (%1),d3;\n" \ + "1: movbu d3,(%2);\n" \ + " add -1,a0;\n" \ + " bne 0b;\n" \ + "2:;" \ + ".section .fixup,\"ax\"\n" \ + "3: jmp 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,3b\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : \ + : "d"(size), "d"(to), "d"(from) \ + : "d3", "a0"); \ +} while (0) + +static inline +unsigned long __constant_copy_to_user(void *to, const void *from, + unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + __constant_copy_user(to, from, n); + return n; +} + +static inline +unsigned long __constant_copy_from_user(void *to, const void *from, + unsigned long n) +{ + if (access_ok(VERIFY_READ, from, n)) + __constant_copy_user_zeroing(to, from, n); + return n; +} + +static inline +unsigned long __constant_copy_to_user_nocheck(void *to, const void *from, + unsigned long n) +{ + __constant_copy_user(to, from, n); + return n; +} + +static inline +unsigned long __constant_copy_from_user_nocheck(void *to, const void *from, + unsigned long n) +{ + __constant_copy_user_zeroing(to, from, n); + return n; +} +#endif + +extern unsigned long __generic_copy_to_user(void __user *, const void *, + unsigned long); +extern unsigned long __generic_copy_from_user(void *, const void __user *, + unsigned long); + +#define __copy_to_user_inatomic(to, from, n) \ + __generic_copy_to_user_nocheck((to), (from), (n)) +#define __copy_from_user_inatomic(to, from, n) \ + __generic_copy_from_user_nocheck((to), (from), (n)) + +#define __copy_to_user(to, from, n) \ +({ \ + might_sleep(); \ + __copy_to_user_inatomic((to), (from), (n)); \ +}) + +#define __copy_from_user(to, from, n) \ +({ \ + might_sleep(); \ + __copy_from_user_inatomic((to), (from), (n)); \ +}) + + +#define copy_to_user(to, from, n) __generic_copy_to_user((to), (from), (n)) +#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n)) + +extern long strncpy_from_user(char *dst, const char __user *src, long count); +extern long __strncpy_from_user(char *dst, const char __user *src, long count); +extern long strnlen_user(const char __user *str, long n); +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) +extern unsigned long clear_user(void __user *mem, unsigned long len); +extern unsigned long __clear_user(void __user *mem, unsigned long len); + +#endif /* _ASM_UACCESS_H */ diff --git a/arch/mn10300/include/asm/ucontext.h b/arch/mn10300/include/asm/ucontext.h new file mode 100644 index 0000000..fcab5c1 --- /dev/null +++ b/arch/mn10300/include/asm/ucontext.h @@ -0,0 +1,22 @@ +/* MN10300 User context + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UCONTEXT_H +#define _ASM_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _ASM_UCONTEXT_H */ diff --git a/arch/mn10300/include/asm/unaligned.h b/arch/mn10300/include/asm/unaligned.h new file mode 100644 index 0000000..0df6713 --- /dev/null +++ b/arch/mn10300/include/asm/unaligned.h @@ -0,0 +1,20 @@ +/* MN10300 Unaligned memory access handling + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_MN10300_UNALIGNED_H +#define _ASM_MN10300_UNALIGNED_H + +#include +#include + +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le + +#endif /* _ASM_MN10300_UNALIGNED_H */ diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h new file mode 100644 index 0000000..543a4f9 --- /dev/null +++ b/arch/mn10300/include/asm/unistd.h @@ -0,0 +1,390 @@ +/* MN10300 System call number list + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNISTD_H +#define _ASM_UNISTD_H + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_madvise1 219 /* delete when C lib stub is removed */ +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_cacheflush 289 +#define __NR_ioprio_set 290 +#define __NR_ioprio_get 291 +#define __NR_inotify_init 292 +#define __NR_inotify_add_watch 293 +#define __NR_inotify_rm_watch 294 +#define __NR_migrate_pages 295 +#define __NR_openat 296 +#define __NR_mkdirat 297 +#define __NR_mknodat 298 +#define __NR_fchownat 299 +#define __NR_futimesat 300 +#define __NR_fstatat64 301 +#define __NR_unlinkat 302 +#define __NR_renameat 303 +#define __NR_linkat 304 +#define __NR_symlinkat 305 +#define __NR_readlinkat 306 +#define __NR_fchmodat 307 +#define __NR_faccessat 308 +#define __NR_pselect6 309 +#define __NR_ppoll 310 +#define __NR_unshare 311 +#define __NR_set_robust_list 312 +#define __NR_get_robust_list 313 +#define __NR_splice 314 +#define __NR_sync_file_range 315 +#define __NR_tee 316 +#define __NR_vmsplice 317 +#define __NR_move_pages 318 +#define __NR_getcpu 319 +#define __NR_epoll_pwait 320 +#define __NR_utimensat 321 +#define __NR_signalfd 322 +#define __NR_timerfd_create 323 +#define __NR_eventfd 324 +#define __NR_fallocate 325 +#define __NR_timerfd_settime 326 +#define __NR_timerfd_gettime 327 +#define __NR_signalfd4 328 +#define __NR_eventfd2 329 +#define __NR_epoll_create1 330 +#define __NR_dup3 331 +#define __NR_pipe2 332 +#define __NR_inotify_init1 333 + +#ifdef __KERNEL__ + +#define NR_syscalls 326 + +/* + * specify the deprecated syscalls we want to support on this arch + */ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_UNISTD_H */ diff --git a/arch/mn10300/include/asm/unit-asb2303/clock.h b/arch/mn10300/include/asm/unit-asb2303/clock.h new file mode 100644 index 0000000..8b450e9 --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2303/clock.h @@ -0,0 +1,45 @@ +/* ASB2303-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MN10300_RTC + +extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ +extern unsigned long mn10300_iobclk; +extern unsigned long mn10300_tsc_per_HZ; + +#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +/* If this processors has a another clock, uncomment the below. */ +/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ + +#else /* !CONFIG_MN10300_RTC */ + +#define MN10300_IOCLK 33333333UL +/* #define MN10300_IOBCLK 66666666UL */ + +#endif /* !CONFIG_MN10300_RTC */ + +#define MN10300_JCCLK MN10300_IOCLK +#define MN10300_TSCCLK MN10300_IOCLK + +#ifdef CONFIG_MN10300_RTC +#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#else /* !CONFIG_MN10300_RTC */ +#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) +#endif /* !CONFIG_MN10300_RTC */ + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/include/asm/unit-asb2303/leds.h b/arch/mn10300/include/asm/unit-asb2303/leds.h new file mode 100644 index 0000000..3a7543e --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2303/leds.h @@ -0,0 +1,43 @@ +/* ASB2303-specific LEDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include +#include +#include + +#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32) +#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32) + +/* + * use the 7-segment LEDs to indicate states + */ + +/* flip the 7-segment LEDs between "G" and "-" */ +#define mn10300_set_gdbleds(ONOFF) \ +do { \ + ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \ +} while (0) + +/* indicate double-fault by displaying "d" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43,d0 ; \ + movbu d0,(ASB2303_7SEGLEDS) + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code code); +extern void peripheral_leds_led_chase(void); +extern void debug_to_serial(const char *p, int n); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/include/asm/unit-asb2303/serial.h b/arch/mn10300/include/asm/unit-asb2303/serial.h new file mode 100644 index 0000000..0d55cf5 --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2303/serial.h @@ -0,0 +1,136 @@ +/* ASB2303-specific 8250 serial ports + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include +#include +#include + +#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 +#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000 + +#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ + +/* + * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ +#endif + +#ifndef __ASSEMBLY__ + +#define LSR_WAIT_FOR(STATE) \ +do { \ + while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \ +} while (0) +#define FLOWCTL_WAIT_FOR(LINE) \ +do { \ + while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \ +} while (0) +#define FLOWCTL_CLEAR(LINE) \ +do { \ + GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_SET(LINE) \ +do { \ + GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + GDBPORT_SERIAL_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + GDBPORT_SERIAL_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/include/asm/unit-asb2303/smc91111.h b/arch/mn10300/include/asm/unit-asb2303/smc91111.h new file mode 100644 index 0000000..dd456e9 --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2303/smc91111.h @@ -0,0 +1,50 @@ +/* Support for the SMC91C111 NIC on an ASB2303 + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SMC91111_H +#define _ASM_UNIT_SMC91111_H + +#include + +#define SMC91111_BASE 0xAA000300UL +#define SMC91111_BASE_END 0xAA000400UL +#define SMC91111_IRQ XIRQ3 + +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_NOWAIT 1 +#define SMC_IRQ_FLAGS (0) + +#if SMC_CAN_USE_8BIT +#define SMC_inb(a, r) inb((unsigned long) ((a) + (r))) +#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r))) +#endif + +#if SMC_CAN_USE_16BIT +#define SMC_inw(a, r) inw((unsigned long) ((a) + (r))) +#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r))) +#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l)) +#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l)) +#endif + +#if SMC_CAN_USE_32BIT +#define SMC_inl(a, r) inl((unsigned long) ((a) + (r))) +#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r))) +#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l)) +#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l)) +#endif + +#define RPC_LSA_DEFAULT RPC_LED_100_10 +#define RPC_LSB_DEFAULT RPC_LED_TX_RX + +#define set_irq_type(irq, type) + +#endif /* _ASM_UNIT_SMC91111_H */ diff --git a/arch/mn10300/include/asm/unit-asb2303/timex.h b/arch/mn10300/include/asm/unit-asb2303/timex.h new file mode 100644 index 0000000..7e54b0c --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2303/timex.h @@ -0,0 +1,135 @@ +/* ASB2303-specific timer specifcations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include +#endif /* __ASSEMBLY__ */ + +#include +#include + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffff +#define TMJCBC TM01BC + +#define TMJCMD TM01MD +#define TMJCBR TM01BR +#define TMJCIRQ TM1IRQ +#define TMJCICR TM1ICR +#define TMJCICR_LEVEL GxICR_LEVEL_5 + +#ifndef __ASSEMBLY__ + +static inline void startup_jiffies_counter(void) +{ + unsigned rate; + u16 md, t16; + + /* use as little prescaling as possible to avoid losing accuracy */ + md = TM0MD_SRC_IOCLK; + rate = MN10300_JCCLK / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_8; + rate = MN10300_JCCLK / 8 / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_32; + rate = MN10300_JCCLK / 32 / HZ; + + if (rate > TMJCBR_MAX) + BUG(); + } + } + + TMJCBR = rate - 1; + t16 = TMJCBR; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_INIT_COUNTER | + TM1MD_INIT_COUNTER << 8; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_COUNT_ENABLE | + TM1MD_COUNT_ENABLE << 8; + + t16 = TMJCMD; + + TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + t16 = TMJCICR; +} + +static inline void shutdown_jiffies_counter(void) +{ +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCBC TM45BC + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time + * - count down from 4Gig-1 to 0 and wrap at IOCLK rate + */ + TM45BR = TMTSCBR_MAX; + + TM4MD = TM4MD_SRC_IOCLK; + TM4MD |= TM4MD_INIT_COUNTER; + TM4MD &= ~TM4MD_INIT_COUNTER; + TM4ICR = 0; + + TM5MD = TM5MD_SRC_TM4CASCADE; + TM5MD |= TM5MD_INIT_COUNTER; + TM5MD &= ~TM5MD_INIT_COUNTER; + TM5ICR = 0; + + TM5MD |= TM5MD_COUNT_ENABLE; + TM4MD |= TM4MD_COUNT_ENABLE; +} + +static inline void shutdown_timestamp_counter(void) +{ + TM4MD = 0; + TM5MD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t)TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/include/asm/unit-asb2305/clock.h b/arch/mn10300/include/asm/unit-asb2305/clock.h new file mode 100644 index 0000000..7d51484 --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2305/clock.h @@ -0,0 +1,45 @@ +/* ASB2305-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MN10300_RTC + +extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ +extern unsigned long mn10300_iobclk; +extern unsigned long mn10300_tsc_per_HZ; + +#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +/* If this processors has a another clock, uncomment the below. */ +/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ + +#else /* !CONFIG_MN10300_RTC */ + +#define MN10300_IOCLK 33333333UL +/* #define MN10300_IOBCLK 66666666UL */ + +#endif /* !CONFIG_MN10300_RTC */ + +#define MN10300_JCCLK MN10300_IOCLK +#define MN10300_TSCCLK MN10300_IOCLK + +#ifdef CONFIG_MN10300_RTC +#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#else /* !CONFIG_MN10300_RTC */ +#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) +#endif /* !CONFIG_MN10300_RTC */ + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/include/asm/unit-asb2305/leds.h b/arch/mn10300/include/asm/unit-asb2305/leds.h new file mode 100644 index 0000000..bc471f6 --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2305/leds.h @@ -0,0 +1,51 @@ +/* ASB2305-specific LEDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include +#include +#include + +#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32) + +/* perform a hard reset by driving PIO06 low */ +#define mn10300_unit_hard_reset() \ +do { \ + P0OUT &= 0xbf; \ + P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \ +} while (0) + +/* + * use the 7-segment LEDs to indicate states + */ +/* indicate double-fault by displaying "db-f" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43077f1d,d0 ; \ + mov d0,(ASB2305_7SEGLEDS) + +/* flip the 7-segment LEDs between "Gdb-" and "----" */ +#define mn10300_set_gdbleds(ONOFF) \ +do { \ + ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ +} while (0) + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code); +extern void peripheral_leds_led_chase(void); +extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_rtc(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/include/asm/unit-asb2305/serial.h b/arch/mn10300/include/asm/unit-asb2305/serial.h new file mode 100644 index 0000000..73d31d6 --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2305/serial.h @@ -0,0 +1,120 @@ +/* ASB2305-specific 8250 serial ports + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include +#include +#include + +#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 +#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) + +#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ + +/* + * dispose of the /dev/ttyS0 serial port + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2305 doesnt have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) + +#define LSR_WAIT_FOR(STATE) \ +do { \ + while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ +} while (0) +#define FLOWCTL_WAIT_FOR(LINE) \ +do { \ + while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ +} while (0) +#define FLOWCTL_CLEAR(LINE) \ +do { \ + TTYS0_MCR &= ~UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_SET(LINE) \ +do { \ + TTYS0_MCR |= UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + TTYS0_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + TTYS0_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/include/asm/unit-asb2305/timex.h b/arch/mn10300/include/asm/unit-asb2305/timex.h new file mode 100644 index 0000000..10e1bfe --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2305/timex.h @@ -0,0 +1,135 @@ +/* ASB2305 timer specifcations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include +#endif /* __ASSEMBLY__ */ + +#include +#include + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffff +#define TMJCBC TM01BC + +#define TMJCMD TM01MD +#define TMJCBR TM01BR +#define TMJCIRQ TM1IRQ +#define TMJCICR TM1ICR +#define TMJCICR_LEVEL GxICR_LEVEL_5 + +#ifndef __ASSEMBLY__ + +static inline void startup_jiffies_counter(void) +{ + unsigned rate; + u16 md, t16; + + /* use as little prescaling as possible to avoid losing accuracy */ + md = TM0MD_SRC_IOCLK; + rate = MN10300_JCCLK / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_8; + rate = MN10300_JCCLK / 8 / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_32; + rate = MN10300_JCCLK / 32 / HZ; + + if (rate > TMJCBR_MAX) + BUG(); + } + } + + TMJCBR = rate - 1; + t16 = TMJCBR; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_INIT_COUNTER | + TM1MD_INIT_COUNTER << 8; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_COUNT_ENABLE | + TM1MD_COUNT_ENABLE << 8; + + t16 = TMJCMD; + + TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + t16 = TMJCICR; +} + +static inline void shutdown_jiffies_counter(void) +{ +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCBC TM45BC + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time + * - count down from 4Gig-1 to 0 and wrap at IOCLK rate + */ + TM45BR = TMTSCBR_MAX; + + TM4MD = TM4MD_SRC_IOCLK; + TM4MD |= TM4MD_INIT_COUNTER; + TM4MD &= ~TM4MD_INIT_COUNTER; + TM4ICR = 0; + + TM5MD = TM5MD_SRC_TM4CASCADE; + TM5MD |= TM5MD_INIT_COUNTER; + TM5MD &= ~TM5MD_INIT_COUNTER; + TM5ICR = 0; + + TM5MD |= TM5MD_COUNT_ENABLE; + TM4MD |= TM4MD_COUNT_ENABLE; +} + +static inline void shutdown_timestamp_counter(void) +{ + TM4MD = 0; + TM5MD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t) TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/include/asm/user.h b/arch/mn10300/include/asm/user.h new file mode 100644 index 0000000..e119390 --- /dev/null +++ b/arch/mn10300/include/asm/user.h @@ -0,0 +1,53 @@ +/* MN10300 User process data + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_USER_H +#define _ASM_USER_H + +#include +#include + +#ifndef __ASSEMBLY__ +/* + * When the kernel dumps core, it starts by dumping the user struct - this will + * be used by gdb to figure out where the data and stack segments are within + * the file, and what virtual addresses to use. + */ +struct user { + /* We start with the registers, to mimic the way that "memory" is + * returned from the ptrace(3,...) function. + */ + struct pt_regs regs; /* Where the registers are actually stored */ + + /* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + int reserved; /* No longer used */ + struct user_pt_regs *u_ar0; /* Used by gdb to help find the values for */ + + /* the registers */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ +}; +#endif + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR +(u.start_code) +#define HOST_STACK_END_ADDR +(u.start_stack + u.u_ssize * NBPG) + +#endif /* _ASM_USER_H */ diff --git a/arch/mn10300/include/asm/vga.h b/arch/mn10300/include/asm/vga.h new file mode 100644 index 0000000..0163e50 --- /dev/null +++ b/arch/mn10300/include/asm/vga.h @@ -0,0 +1,17 @@ +/* MN10300 VGA register definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_VGA_H +#define _ASM_VGA_H + + + +#endif /* _ASM_VGA_H */ diff --git a/arch/mn10300/include/asm/xor.h b/arch/mn10300/include/asm/xor.h new file mode 100644 index 0000000..c82eb12 --- /dev/null +++ b/arch/mn10300/include/asm/xor.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-mn10300/Kbuild b/include/asm-mn10300/Kbuild deleted file mode 100644 index c68e168..0000000 --- a/include/asm-mn10300/Kbuild +++ /dev/null @@ -1 +0,0 @@ -include include/asm-generic/Kbuild.asm diff --git a/include/asm-mn10300/atomic.h b/include/asm-mn10300/atomic.h deleted file mode 100644 index bc06482..0000000 --- a/include/asm-mn10300/atomic.h +++ /dev/null @@ -1,157 +0,0 @@ -/* MN10300 Atomic counter operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_ATOMIC_H -#define _ASM_ATOMIC_H - -#ifdef CONFIG_SMP -#error not SMP safe -#endif - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ - -/** - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. Note that the guaranteed - * useful range of an atomic_t is only 24 bits. - */ -#define atomic_read(v) ((v)->counter) - -/** - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. Note that the guaranteed - * useful range of an atomic_t is only 24 bits. - */ -#define atomic_set(v, i) (((v)->counter) = (i)) - -#include - -/** - * atomic_add_return - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v and returns the result - * Note that the guaranteed useful range of an atomic_t is only 24 bits. - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int temp; - - local_irq_save(flags); - temp = v->counter; - temp += i; - v->counter = temp; - local_irq_restore(flags); - - return temp; -} - -/** - * atomic_sub_return - subtract integer from atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v and returns the result - * Note that the guaranteed useful range of an atomic_t is only 24 bits. - */ -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long flags; - int temp; - - local_irq_save(flags); - temp = v->counter; - temp -= i; - v->counter = temp; - local_irq_restore(flags); - - return temp; -} - -static inline int atomic_add_negative(int i, atomic_t *v) -{ - return atomic_add_return(i, v) < 0; -} - -static inline void atomic_add(int i, atomic_t *v) -{ - atomic_add_return(i, v); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - atomic_sub_return(i, v); -} - -static inline void atomic_inc(atomic_t *v) -{ - atomic_add_return(1, v); -} - -static inline void atomic_dec(atomic_t *v) -{ - atomic_sub_return(1, v); -} - -#define atomic_dec_return(v) atomic_sub_return(1, (v)) -#define atomic_inc_return(v) atomic_add_return(1, (v)) - -#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) - -#define atomic_add_unless(v, a, u) \ -({ \ - int c, old; \ - c = atomic_read(v); \ - while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ - c = old; \ - c != (u); \ -}) - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - mask = ~mask; - local_irq_save(flags); - *addr &= mask; - local_irq_restore(flags); -} - -#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) - -/* Atomic operations are already serializing on MN10300??? */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include - -#endif /* __KERNEL__ */ -#endif /* _ASM_ATOMIC_H */ diff --git a/include/asm-mn10300/auxvec.h b/include/asm-mn10300/auxvec.h deleted file mode 100644 index 4fdb60b..0000000 --- a/include/asm-mn10300/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_AUXVEC_H -#define _ASM_AUXVEC_H - -#endif diff --git a/include/asm-mn10300/bitops.h b/include/asm-mn10300/bitops.h deleted file mode 100644 index 0b610f4..0000000 --- a/include/asm-mn10300/bitops.h +++ /dev/null @@ -1,240 +0,0 @@ -/* MN10300 bit operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * These have to be done with inline assembly: that way the bit-setting - * is guaranteed to be atomic. All bit operations return 0 if the bit - * was cleared before the operation and != 0 if it was not. - * - * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). - */ -#ifndef __ASM_BITOPS_H -#define __ASM_BITOPS_H - -#include - -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -/* - * set bit - */ -#define __set_bit(nr, addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - _a += (nr) >> 3; \ - \ - asm volatile("bset %2,(%1) # set_bit reg" \ - : "=m"(*_a) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ -}) - -#define set_bit(nr, addr) __set_bit((nr), (addr)) - -/* - * clear bit - */ -#define ___clear_bit(nr, addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - _a += (nr) >> 3; \ - \ - asm volatile("bclr %2,(%1) # clear_bit reg" \ - : "=m"(*_a) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ -}) - -#define clear_bit(nr, addr) ___clear_bit((nr), (addr)) - - -static inline void __clear_bit(int nr, volatile void *addr) -{ - unsigned int *a = (unsigned int *) addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a &= ~mask; -} - -/* - * test bit - */ -static inline int test_bit(int nr, const volatile void *addr) -{ - return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31)); -} - -/* - * change bit - */ -static inline void __change_bit(int nr, volatile void *addr) -{ - int mask; - unsigned int *a = (unsigned int *) addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - *a ^= mask; -} - -extern void change_bit(int nr, volatile void *addr); - -/* - * test and set bit - */ -#define __test_and_set_bit(nr,addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - unsigned epsw; \ - _a += (nr) >> 3; \ - \ - asm volatile("bset %3,(%2) # test_set_bit reg\n" \ - "mov epsw,%1" \ - : "=m"(*_a), "=d"(epsw) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ - \ - !(epsw & EPSW_FLAG_Z); \ -}) - -#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr)) - -/* - * test and clear bit - */ -#define __test_and_clear_bit(nr, addr) \ -({ \ - volatile unsigned char *_a = (unsigned char *)(addr); \ - const unsigned shift = (nr) & 7; \ - unsigned epsw; \ - _a += (nr) >> 3; \ - \ - asm volatile("bclr %3,(%2) # test_clear_bit reg\n" \ - "mov epsw,%1" \ - : "=m"(*_a), "=d"(epsw) \ - : "a"(_a), "d"(1 << shift), "m"(*_a) \ - : "memory", "cc"); \ - \ - !(epsw & EPSW_FLAG_Z); \ -}) - -#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr)) - -/* - * test and change bit - */ -static inline int __test_and_change_bit(int nr, volatile void *addr) -{ - int mask, retval; - unsigned int *a = (unsigned int *)addr; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - retval = (mask & *a) != 0; - *a ^= mask; - - return retval; -} - -extern int test_and_change_bit(int nr, volatile void *addr); - -#include - -#ifdef __KERNEL__ - -/** - * __ffs - find first bit set - * @x: the word to search - * - * - return 31..0 to indicate bit 31..0 most least significant bit set - * - if no bits are set in x, the result is undefined - */ -static inline __attribute__((const)) -unsigned long __ffs(unsigned long x) -{ - int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x)); - return bit; -} - -/* - * special slimline version of fls() for calculating ilog2_u32() - * - note: no protection against n == 0 - */ -static inline __attribute__((const)) -int __ilog2_u32(u32 n) -{ - int bit; - asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n)); - return bit; -} - -/** - * fls - find last bit set - * @x: the word to search - * - * This is defined the same way as ffs: - * - return 32..1 to indicate bit 31..0 most significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int fls(int x) -{ - return (x != 0) ? __ilog2_u32(x) + 1 : 0; -} - -/** - * __fls - find last (most-significant) set bit in a long word - * @word: the word to search - * - * Undefined if no set bit exists, so code should check against 0 first. - */ -static inline unsigned long __fls(unsigned long word) -{ - return __ilog2_u32(word); -} - -/** - * ffs - find first bit set - * @x: the word to search - * - * - return 32..1 to indicate bit 31..0 most least significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int ffs(int x) -{ - /* Note: (x & -x) gives us a mask that is the least significant - * (rightmost) 1-bit of the value in x. - */ - return fls(x & -x); -} - -#include -#include -#include -#include -#include - -#define ext2_set_bit_atomic(lock, nr, addr) \ - test_and_set_bit((nr) ^ 0x18, (addr)) -#define ext2_clear_bit_atomic(lock, nr, addr) \ - test_and_clear_bit((nr) ^ 0x18, (addr)) - -#include -#include - -#endif /* __KERNEL__ */ -#endif /* __ASM_BITOPS_H */ diff --git a/include/asm-mn10300/bug.h b/include/asm-mn10300/bug.h deleted file mode 100644 index 4fcf338..0000000 --- a/include/asm-mn10300/bug.h +++ /dev/null @@ -1,35 +0,0 @@ -/* MN10300 Kernel bug reporting - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_BUG_H -#define _ASM_BUG_H - -/* - * Tell the user there is some problem. - */ -#define _debug_bug_trap() \ -do { \ - asm volatile( \ - " syscall 15 \n" \ - "0: \n" \ - " .section __bug_table,\"a\" \n" \ - " .long 0b,%0,%1 \n" \ - " .previous \n" \ - : \ - : "i"(__FILE__), "i"(__LINE__) \ - ); \ -} while (0) - -#define BUG() _debug_bug_trap() - -#define HAVE_ARCH_BUG -#include - -#endif /* _ASM_BUG_H */ diff --git a/include/asm-mn10300/bugs.h b/include/asm-mn10300/bugs.h deleted file mode 100644 index 31c8bc5..0000000 --- a/include/asm-mn10300/bugs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* MN10300 Checks for architecture-dependent bugs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_BUGS_H -#define _ASM_BUGS_H - -#include - -static inline void __init check_bugs(void) -{ -} - -#endif /* _ASM_BUGS_H */ diff --git a/include/asm-mn10300/busctl-regs.h b/include/asm-mn10300/busctl-regs.h deleted file mode 100644 index 1632aef..0000000 --- a/include/asm-mn10300/busctl-regs.h +++ /dev/null @@ -1,151 +0,0 @@ -/* AM33v2 on-board bus controller registers - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_BUSCTL_REGS_H -#define _ASM_BUSCTL_REGS_H - -#include - -#ifdef __KERNEL__ - -/* bus controller registers */ -#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */ -#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */ -#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */ -#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */ -#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */ -#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */ -#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */ -#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */ -#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */ -#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */ -#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */ -#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */ -#define BCCR_API 0x00070000 /* bus arbitration priority */ -#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */ -#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */ -#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */ -#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */ -#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */ -#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */ -#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */ -#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */ -#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */ -#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */ -#define BCCR_TMON 0x03000000 /* timeout value settings */ -#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */ -#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */ -#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */ -#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */ -#define BCCR_TMOE 0x10000000 /* timeout detection enable */ - -#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */ -#define BCBERR_BESB 0x0000001f /* erroneous access destination space */ -#define BCBERR_BESB_MON 0x00000001 /* - monitor space */ -#define BCBERR_BESB_IO 0x00000002 /* - IO bus */ -#define BCBERR_BESB_EX 0x00000004 /* - EX bus */ -#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */ -#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */ -#define BCBERR_BERW 0x00000100 /* type of access */ -#define BCBERR_BERW_WRITE 0x00000000 /* - write */ -#define BCBERR_BERW_READ 0x00000100 /* - read */ -#define BCBERR_BESD 0x00000200 /* error detector */ -#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */ -#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */ -#define BCBERR_BEBST 0x00000400 /* type of access */ -#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */ -#define BCBERR_BEBST_BURST 0x00000400 /* - burst */ -#define BCBERR_BEME 0x00000800 /* multiple bus error flag */ -#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */ -#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */ -#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */ -#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */ -#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */ - -#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */ - -/* system bus controller registers */ -#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */ -#define SBBASE_BE 0x00000001 /* bank enable */ -#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */ -#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */ - -#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */ -#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */ -#define SBCNTRL0_REH 0x0000f000 /* read enable hold */ -#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */ -#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */ -#define SBCNTRL0_DAH 0x0f000000 /* data hold */ -#define SBCNTRL0_ADH 0xf0000000 /* address hold */ - -#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */ -#define SBCNTRL1_WED 0x00000f00 /* write enable delay */ -#define SBCNTRL1_RED 0x0000f000 /* read enable delay */ -#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */ -#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */ -#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */ -#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */ - -#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */ -#define SBCNTRL2_WC 0x000000ff /* wait count */ -#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */ -#define SBCNTRL2_WM 0x01000000 /* wait mode setting */ -#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */ -#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */ -#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */ -#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */ -#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */ -#define SBCNTRL2_BW 0x04000000 /* bus width */ -#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */ -#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */ -#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */ -#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */ -#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */ -#define SBCNTRL2_BT 0x70000000 /* bus type setting */ -#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */ -#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */ -#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */ -#define SBCNTRL2_BTSE 0x80000000 /* burst enable */ - -/* memory bus controller */ -#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */ -#define SDBASE_CE 0x00000001 /* chip enable */ -#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */ -#define SDBASE_CBAM_SHIFT 16 -#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */ - -#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */ -#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */ -#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */ -#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */ -#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */ -#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */ -#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */ -#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */ -#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */ -#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */ -#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */ -#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */ -#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */ -#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */ -#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */ -#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */ -#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */ -#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */ - -#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */ -#define SDREFCNT_PERI 0x00000fff /* refresh period */ - -#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_BUSCTL_REGS_H */ diff --git a/include/asm-mn10300/byteorder.h b/include/asm-mn10300/byteorder.h deleted file mode 100644 index 5dd0bdd..0000000 --- a/include/asm-mn10300/byteorder.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_BYTEORDER_H -#define _ASM_BYTEORDER_H - -#include - -#endif /* _ASM_BYTEORDER_H */ diff --git a/include/asm-mn10300/cache.h b/include/asm-mn10300/cache.h deleted file mode 100644 index 9e01122..0000000 --- a/include/asm-mn10300/cache.h +++ /dev/null @@ -1,54 +0,0 @@ -/* MN10300 cache management registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_CACHE_H -#define _ASM_CACHE_H - -#include -#include - -#ifndef __ASSEMBLY__ -#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES) -#else -#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES -#endif - -/* data cache purge registers - * - read from the register to unconditionally purge that cache line - * - write address & 0xffffff00 to conditionally purge that cache line - * - clear LSB to request invalidation as well - */ -#define DCACHE_PURGE(WAY, ENTRY) \ - __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \ - (ENTRY) * L1_CACHE_BYTES, u32) - -#define DCACHE_PURGE_WAY0(ENTRY) \ - __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) -#define DCACHE_PURGE_WAY1(ENTRY) \ - __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) -#define DCACHE_PURGE_WAY2(ENTRY) \ - __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) -#define DCACHE_PURGE_WAY3(ENTRY) \ - __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) - -/* instruction cache access registers */ -#define ICACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) -#define ICACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) - -/* instruction cache access registers */ -#define DCACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) -#define DCACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) - -#endif /* _ASM_CACHE_H */ diff --git a/include/asm-mn10300/cacheflush.h b/include/asm-mn10300/cacheflush.h deleted file mode 100644 index 2db746a..0000000 --- a/include/asm-mn10300/cacheflush.h +++ /dev/null @@ -1,116 +0,0 @@ -/* MN10300 Cache flushing - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CACHEFLUSH_H -#define _ASM_CACHEFLUSH_H - -#ifndef __ASSEMBLY__ - -/* Keep includes the same across arches. */ -#include - -/* - * virtually-indexed cache managment (our cache is physically indexed) - */ -#define flush_cache_all() do {} while (0) -#define flush_cache_mm(mm) do {} while (0) -#define flush_cache_dup_mm(mm) do {} while (0) -#define flush_cache_range(mm, start, end) do {} while (0) -#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) -#define flush_cache_vmap(start, end) do {} while (0) -#define flush_cache_vunmap(start, end) do {} while (0) -#define flush_dcache_page(page) do {} while (0) -#define flush_dcache_mmap_lock(mapping) do {} while (0) -#define flush_dcache_mmap_unlock(mapping) do {} while (0) - -/* - * physically-indexed cache managment - */ -#ifndef CONFIG_MN10300_CACHE_DISABLED - -extern void flush_icache_range(unsigned long start, unsigned long end); -extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); - -#else - -#define flush_icache_range(start, end) do {} while (0) -#define flush_icache_page(vma, pg) do {} while (0) - -#endif - -#define flush_icache_user_range(vma, pg, adr, len) \ - flush_icache_range(adr, adr + len) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_icache_page(vma, page); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -/* - * primitive routines - */ -#ifndef CONFIG_MN10300_CACHE_DISABLED -extern void mn10300_icache_inv(void); -extern void mn10300_dcache_inv(void); -extern void mn10300_dcache_inv_page(unsigned start); -extern void mn10300_dcache_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_inv_range2(unsigned start, unsigned size); -#ifdef CONFIG_MN10300_CACHE_WBACK -extern void mn10300_dcache_flush(void); -extern void mn10300_dcache_flush_page(unsigned start); -extern void mn10300_dcache_flush_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_range2(unsigned start, unsigned size); -extern void mn10300_dcache_flush_inv(void); -extern void mn10300_dcache_flush_inv_page(unsigned start); -extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); -#else -#define mn10300_dcache_flush() do {} while (0) -#define mn10300_dcache_flush_page(start) do {} while (0) -#define mn10300_dcache_flush_range(start, end) do {} while (0) -#define mn10300_dcache_flush_range2(start, size) do {} while (0) -#define mn10300_dcache_flush_inv() mn10300_dcache_inv() -#define mn10300_dcache_flush_inv_page(start) \ - mn10300_dcache_inv_page((start)) -#define mn10300_dcache_flush_inv_range(start, end) \ - mn10300_dcache_inv_range((start), (end)) -#define mn10300_dcache_flush_inv_range2(start, size) \ - mn10300_dcache_inv_range2((start), (size)) -#endif /* CONFIG_MN10300_CACHE_WBACK */ -#else -#define mn10300_icache_inv() do {} while (0) -#define mn10300_dcache_inv() do {} while (0) -#define mn10300_dcache_inv_page(start) do {} while (0) -#define mn10300_dcache_inv_range(start, end) do {} while (0) -#define mn10300_dcache_inv_range2(start, size) do {} while (0) -#define mn10300_dcache_flush() do {} while (0) -#define mn10300_dcache_flush_inv_page(start) do {} while (0) -#define mn10300_dcache_flush_inv() do {} while (0) -#define mn10300_dcache_flush_inv_range(start, end) do {} while (0) -#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0) -#define mn10300_dcache_flush_page(start) do {} while (0) -#define mn10300_dcache_flush_range(start, end) do {} while (0) -#define mn10300_dcache_flush_range2(start, size) do {} while (0) -#endif /* CONFIG_MN10300_CACHE_DISABLED */ - -/* - * internal debugging function - */ -#ifdef CONFIG_DEBUG_PAGEALLOC -extern void kernel_map_pages(struct page *page, int numpages, int enable); -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_CACHEFLUSH_H */ diff --git a/include/asm-mn10300/checksum.h b/include/asm-mn10300/checksum.h deleted file mode 100644 index 9fb2a8d..0000000 --- a/include/asm-mn10300/checksum.h +++ /dev/null @@ -1,86 +0,0 @@ -/* MN10300 Optimised checksumming code - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CHECKSUM_H -#define _ASM_CHECKSUM_H - -extern __wsum csum_partial(const void *buff, int len, __wsum sum); -extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); -extern __wsum csum_partial_copy_from_user(const void *src, void *dst, - int len, __wsum sum, - int *err_ptr); -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); -extern __wsum csum_partial(const void *buff, int len, __wsum sum); -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define csum_partial_copy_fromuser csum_partial_copy -extern __wsum csum_partial_copy(const void *src, void *dst, int len, - __wsum sum); - -static inline __sum16 csum_fold(__wsum sum) -{ - asm( - " add %1,%0 \n" - " addc 0xffff,%0 \n" - : "=r" (sum) - : "r" (sum << 16), "0" (sum & 0xffff0000) - : "cc" - ); - return (~sum) >> 16; -} - -static inline __wsum csum_tcpudp_nofold(unsigned long saddr, - unsigned long daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - __wsum tmp; - - tmp = (__wsum) ntohs(len) << 16; - tmp += (__wsum) proto << 8; - - asm( - " add %1,%0 \n" - " addc %2,%0 \n" - " addc %3,%0 \n" - " addc 0,%0 \n" - : "=r" (sum) - : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum) - : "cc" - ); - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(unsigned long saddr, - unsigned long daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -#undef _HAVE_ARCH_IPV6_CSUM - -/* - * Copy and checksum to user - */ -#define HAVE_CSUM_COPY_USER -extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len, - __wsum sum, int *err_ptr); - - -#endif /* _ASM_CHECKSUM_H */ diff --git a/include/asm-mn10300/cpu-regs.h b/include/asm-mn10300/cpu-regs.h deleted file mode 100644 index 757e9b5..0000000 --- a/include/asm-mn10300/cpu-regs.h +++ /dev/null @@ -1,290 +0,0 @@ -/* MN10300 Core system registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CPU_REGS_H -#define _ASM_CPU_REGS_H - -#ifndef __ASSEMBLY__ -#include -#endif - -#ifdef CONFIG_MN10300_CPU_AM33V2 -/* we tell the compiler to pretend to be AM33 so that it doesn't try and use - * the FP regs, but tell the assembler that we're actually allowed AM33v2 - * instructions */ -#ifndef __ASSEMBLY__ -asm(" .am33_2\n"); -#else -.am33_2 -#endif -#endif - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR)) -#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR)) -#else -#define __SYSREG(ADDR, TYPE) ADDR -#define __SYSREGC(ADDR, TYPE) ADDR -#endif - -/* CPU registers */ -#define EPSW_FLAG_Z 0x00000001 /* zero flag */ -#define EPSW_FLAG_N 0x00000002 /* negative flag */ -#define EPSW_FLAG_C 0x00000004 /* carry flag */ -#define EPSW_FLAG_V 0x00000008 /* overflow flag */ -#define EPSW_IM 0x00000700 /* interrupt mode */ -#define EPSW_IM_0 0x00000000 /* interrupt mode 0 */ -#define EPSW_IM_1 0x00000100 /* interrupt mode 1 */ -#define EPSW_IM_2 0x00000200 /* interrupt mode 2 */ -#define EPSW_IM_3 0x00000300 /* interrupt mode 3 */ -#define EPSW_IM_4 0x00000400 /* interrupt mode 4 */ -#define EPSW_IM_5 0x00000500 /* interrupt mode 5 */ -#define EPSW_IM_6 0x00000600 /* interrupt mode 6 */ -#define EPSW_IM_7 0x00000700 /* interrupt mode 7 */ -#define EPSW_IE 0x00000800 /* interrupt enable */ -#define EPSW_S 0x00003000 /* software auxilliary bits */ -#define EPSW_T 0x00008000 /* trace enable */ -#define EPSW_nSL 0x00010000 /* not supervisor level */ -#define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */ -#define EPSW_nAR 0x00040000 /* register bank control */ -#define EPSW_ML 0x00080000 /* monitor level */ -#define EPSW_FE 0x00100000 /* FPU enable */ - -/* FPU registers */ -#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */ -#define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */ -#define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */ -#define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */ -#define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */ -#define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */ -#define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */ -#define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */ -#define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */ -#define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */ -#define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */ -#define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */ -#define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */ -#define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */ -#define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */ -#define FPCR_RM 0x00030000 /* rounding mode */ -#define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */ -#define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */ -#define FPCR_FCC_E 0x00080000 /* FPU equal condition code */ -#define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */ -#define FPCR_FCC_L 0x00200000 /* FPU less than condition code */ -#define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */ - -/* CPU control registers */ -#define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */ -#define CPUP_DWBD 0x0020 /* write buffer disable flag */ -#define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */ -#define CPUP_EXM 0x0080 /* exception operation mode */ -#define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */ -#define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */ - -#define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */ -#define CPUM_SLEEP 0x0004 /* set to enter sleep state */ -#define CPUM_HALT 0x0008 /* set to enter halt state */ -#define CPUM_STOP 0x0010 /* set to enter stop state */ - -#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */ -#define CPUREV_TYPE 0x0000000f /* CPU type */ -#define CPUREV_TYPE_S 0 -#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */ -#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */ -#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */ -#define CPUREV_REVISION 0x000000f0 /* CPU revision */ -#define CPUREV_REVISION_S 4 -#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */ -#define CPUREV_ICWAY_S 8 -#define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */ -#define CPUREV_ICSIZE_S 12 -#define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */ -#define CPUREV_DCWAY_S 16 -#define CPUREV_DCSIZE 0x00f00000 /* data cache way size */ -#define CPUREV_DCSIZE_S 20 -#define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */ -#define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */ -#define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */ - -#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */ - -/* interrupt/exception control registers */ -#define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */ -#define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */ -#define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */ -#define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */ -#define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */ -#define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */ -#define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */ - -#define TBR __SYSREG(0xc0000024, u32) /* Trap table base */ -#define TBR_TB 0xff000000 /* table base address bits 31-24 */ -#define TBR_INT_CODE 0x00ffffff /* interrupt code */ - -#define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */ - -#define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */ -#define sISR_IRQICE 0x00000001 /* ICE interrupt */ -#define sISR_ISTEP 0x00000002 /* single step interrupt */ -#define sISR_MISSA 0x00000004 /* memory access address misalignment fault */ -#define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */ -#define sISR_PIEXE 0x00000010 /* program interrupt */ -#define sISR_MEMERR 0x00000020 /* illegal memory access fault */ -#define sISR_IBREAK 0x00000040 /* instraction break interrupt */ -#define sISR_DBSRL 0x00000080 /* debug serial interrupt */ -#define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */ -#define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */ -#define sISR_OBREAK 0x00000400 /* operand break interrupt */ -#define sISR_PRIV 0x00000800 /* privileged instruction execution fault */ -#define sISR_BUSERR 0x00001000 /* bus error fault */ -#define sISR_DBLFT 0x00002000 /* double fault */ -#define sISR_DBG 0x00008000 /* debug reserved interrupt */ -#define sISR_ITMISS 0x00010000 /* instruction TLB miss */ -#define sISR_DTMISS 0x00020000 /* data TLB miss */ -#define sISR_ITEX 0x00040000 /* instruction TLB access exception */ -#define sISR_DTEX 0x00080000 /* data TLB access exception */ -#define sISR_ILGIA 0x00100000 /* illegal instruction access exception */ -#define sISR_ILGDA 0x00200000 /* illegal data access exception */ -#define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */ -#define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */ -#define sISR_PRIDA 0x01000000 /* privileged space data access excep */ -#define sISR_DISA 0x02000000 /* data space instruction access excep */ -#define sISR_SYSC 0x04000000 /* system call instruction excep */ -#define sISR_FPUD 0x08000000 /* FPU disabled excep */ -#define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */ -#define sISR_FPUOP 0x20000000 /* FPU operation excep */ -#define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */ - -/* cache control registers */ -#define CHCTR __SYSREG(0xc0000070, u16) /* cache control */ -#define CHCTR_ICEN 0x0001 /* instruction cache enable */ -#define CHCTR_DCEN 0x0002 /* data cache enable */ -#define CHCTR_ICBUSY 0x0004 /* instruction cache busy */ -#define CHCTR_DCBUSY 0x0008 /* data cache busy */ -#define CHCTR_ICINV 0x0010 /* instruction cache invalidate */ -#define CHCTR_DCINV 0x0020 /* data cache invalidate */ -#define CHCTR_DCWTMD 0x0040 /* data cache writing mode */ -#define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */ -#define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */ -#define CHCTR_DCALMD 0x0080 /* data cache allocation mode */ -#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */ -#define CHCTR_DCWMD 0xf000 /* data cache way mode */ - -/* MMU control registers */ -#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */ -#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */ -#define MMUCTR_ITE 0x00000040 /* instruction TLB enable */ -#define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */ -#define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */ -#define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */ -#define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */ -#define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */ -#define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */ -#define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */ -#define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */ -#define MMUCTR_CE 0x00008000 /* cacheable bit enable */ -#define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */ -#define MMUCTR_DTE 0x00400000 /* data TLB enable */ -#define MMUCTR_DIV 0x00800000 /* data TLB invalidate */ -#define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */ -#define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */ -#define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */ -#define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */ -#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */ -#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */ -#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */ - -#define PIDR __SYSREG(0xc0000094, u16) /* PID register */ -#define PIDR_PID 0x00ff /* process identifier */ - -#define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */ - -#define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */ -#define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */ -#define xPTEL_V 0x00000001 /* TLB entry valid */ -#define xPTEL_UNUSED1 0x00000002 /* unused bit */ -#define xPTEL_UNUSED2 0x00000004 /* unused bit */ -#define xPTEL_C 0x00000008 /* cached if set */ -#define xPTEL_PV 0x00000010 /* page valid */ -#define xPTEL_D 0x00000020 /* dirty */ -#define xPTEL_PR 0x000001c0 /* page protection */ -#define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */ -#define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */ -#define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */ -#define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */ -#define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */ -#define xPTEL_G 0x00000200 /* global (use PID if 0) */ -#define xPTEL_PS 0x00000c00 /* page size */ -#define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */ -#define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */ -#define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */ -#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */ -#define xPTEL_PPN 0xfffff006 /* physical page number */ - -#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */ -#define xPTEL_UNUSED1_BIT 1 -#define xPTEL_UNUSED2_BIT 2 -#define xPTEL_C_BIT 3 -#define xPTEL_PV_BIT 4 -#define xPTEL_D_BIT 5 -#define xPTEL_G_BIT 9 - -#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */ -#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */ -#define xPTEU_VPN 0xfffffc00 /* virtual page number */ -#define xPTEU_PID 0x000000ff /* process identifier to which applicable */ - -#define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */ -#define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */ -#define xPTEL2_V 0x00000001 /* TLB entry valid */ -#define xPTEL2_C 0x00000002 /* cacheable */ -#define xPTEL2_PV 0x00000004 /* page valid */ -#define xPTEL2_D 0x00000008 /* dirty */ -#define xPTEL2_PR 0x00000070 /* page protection */ -#define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */ -#define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */ -#define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */ -#define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */ -#define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */ -#define xPTEL2_G 0x00000080 /* global (use PID if 0) */ -#define xPTEL2_PS 0x00000300 /* page size */ -#define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */ -#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */ -#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */ -#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */ -#define xPTEL2_PPN 0xfffffc00 /* physical page number */ - -#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */ -#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */ -#define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */ -#define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */ -#define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */ -#define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */ -#define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */ -#define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */ -#define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */ -#define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */ -#define MMUFCR_xFC_TYPE 0x0020 /* access type flag */ -#define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */ -#define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */ -#define MMUFCR_xFC_PR 0x01c0 /* page protection flag */ -#define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */ -#define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */ -#define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */ -#define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */ -#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */ -#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_CPU_REGS_H */ diff --git a/include/asm-mn10300/cputime.h b/include/asm-mn10300/cputime.h deleted file mode 100644 index 6d68ad7..0000000 --- a/include/asm-mn10300/cputime.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/current.h b/include/asm-mn10300/current.h deleted file mode 100644 index ca6027d..0000000 --- a/include/asm-mn10300/current.h +++ /dev/null @@ -1,37 +0,0 @@ -/* MN10300 Current task structure accessor - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_CURRENT_H -#define _ASM_CURRENT_H - -#include - -/* - * dedicate E2 to keeping the current task pointer - */ -#ifdef CONFIG_MN10300_CURRENT_IN_E2 - -register struct task_struct *const current asm("e2") __attribute__((used)); - -#define get_current() current - -extern struct task_struct *__current; - -#else -static inline __attribute__((const)) -struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() -#endif - -#endif /* _ASM_CURRENT_H */ diff --git a/include/asm-mn10300/delay.h b/include/asm-mn10300/delay.h deleted file mode 100644 index 34517b3..0000000 --- a/include/asm-mn10300/delay.h +++ /dev/null @@ -1,19 +0,0 @@ -/* MN10300 Uninterruptible delay routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DELAY_H -#define _ASM_DELAY_H - -extern void __udelay(unsigned long usecs); -extern void __delay(unsigned long loops); - -#define udelay(n) __udelay(n) - -#endif /* _ASM_DELAY_H */ diff --git a/include/asm-mn10300/device.h b/include/asm-mn10300/device.h deleted file mode 100644 index f0a4c25..0000000 --- a/include/asm-mn10300/device.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/div64.h b/include/asm-mn10300/div64.h deleted file mode 100644 index 3a8329b..0000000 --- a/include/asm-mn10300/div64.h +++ /dev/null @@ -1,100 +0,0 @@ -/* MN10300 64-bit division - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DIV64 -#define _ASM_DIV64 - -#include - -extern void ____unhandled_size_in_do_div___(void); - -/* - * divide n by base, leaving the result in n and returning the remainder - * - we can do this quite efficiently on the MN10300 by cascading the divides - * through the MDR register - */ -#define do_div(n, base) \ -({ \ - unsigned __rem = 0; \ - if (sizeof(n) <= 4) { \ - asm("mov %1,mdr \n" \ - "divu %2,%0 \n" \ - "mov mdr,%1 \n" \ - : "+r"(n), "=d"(__rem) \ - : "r"(base), "1"(__rem) \ - : "cc" \ - ); \ - } else if (sizeof(n) <= 8) { \ - union { \ - unsigned long long l; \ - u32 w[2]; \ - } __quot; \ - __quot.l = n; \ - asm("mov %0,mdr \n" /* MDR = 0 */ \ - "divu %3,%1 \n" \ - /* __quot.MSL = __div.MSL / base, */ \ - /* MDR = MDR:__div.MSL % base */ \ - "divu %3,%2 \n" \ - /* __quot.LSL = MDR:__div.LSL / base, */ \ - /* MDR = MDR:__div.LSL % base */ \ - "mov mdr,%0 \n" \ - : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \ - : "r"(base), "0"(__rem), "1"(__quot.w[1]), \ - "2"(__quot.w[0]) \ - : "cc" \ - ); \ - n = __quot.l; \ - } else { \ - ____unhandled_size_in_do_div___(); \ - } \ - __rem; \ -}) - -/* - * do an unsigned 32-bit multiply and divide with intermediate 64-bit product - * so as not to lose accuracy - * - we use the MDR register to hold the MSW of the product - */ -static inline __attribute__((const)) -unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div) -{ - unsigned result; - - asm("mulu %2,%0 \n" /* MDR:val = val*mult */ - "divu %3,%0 \n" /* val = MDR:val/div; - * MDR = MDR:val%div */ - : "=r"(result) - : "0"(val), "ir"(mult), "r"(div) - ); - - return result; -} - -/* - * do a signed 32-bit multiply and divide with intermediate 64-bit product so - * as not to lose accuracy - * - we use the MDR register to hold the MSW of the product - */ -static inline __attribute__((const)) -signed __muldiv64s(signed val, signed mult, signed div) -{ - signed result; - - asm("mul %2,%0 \n" /* MDR:val = val*mult */ - "div %3,%0 \n" /* val = MDR:val/div; - * MDR = MDR:val%div */ - : "=r"(result) - : "0"(val), "ir"(mult), "r"(div) - ); - - return result; -} - -#endif /* _ASM_DIV64 */ diff --git a/include/asm-mn10300/dma-mapping.h b/include/asm-mn10300/dma-mapping.h deleted file mode 100644 index ccae8f6..0000000 --- a/include/asm-mn10300/dma-mapping.h +++ /dev/null @@ -1,234 +0,0 @@ -/* DMA mapping routines for the MN10300 arch - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H - -#include -#include - -#include -#include - -extern void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag); - -extern void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f)) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h)) - -/* - * Map a single buffer of the indicated size for DMA in streaming mode. The - * 32-bit bus address to use is returned. - * - * Once the device is given the dma address, the device owns this memory until - * either pci_unmap_single or pci_dma_sync_single is performed. - */ -static inline -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - mn10300_dcache_flush_inv(); - return virt_to_bus(ptr); -} - -/* - * Unmap a single streaming mode DMA translation. The dma_addr and size must - * match what was provided for in a previous pci_map_single call. All other - * usages are undefined. - * - * After this call, reads by the cpu to the buffer are guarenteed to see - * whatever the device wrote there. - */ -static inline -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -/* - * Map a set of buffers described by scatterlist in streaming mode for DMA. - * This is the scather-gather version of the above pci_map_single interface. - * Here the scatter gather list elements are each tagged with the appropriate - * dma address and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of DMA - * address/length pairs than there are SG table elements. (for example - * via virtual mapping capabilities) The routine returns the number of - * addr/length pairs actually used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are the same - * here. - */ -static inline -int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nents == 0 || sglist[0].length == 0); - - for_each_sg(sglist, sg, nents, i) { - BUG_ON(!sg_page(sg)); - - sg->dma_address = sg_phys(sg); - } - - mn10300_dcache_flush_inv(); - return nents; -} - -/* - * Unmap a set of streaming mode DMA translations. - * Again, cpu read rules concerning calls here are the same as for - * pci_unmap_single() above. - */ -static inline -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); -} - -/* - * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical - * to pci_map_single, but takes a struct page instead of a virtual address - */ -static inline -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - return page_to_bus(page) + offset; -} - -static inline -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -/* - * Make physical memory consistent for a single streaming mode DMA translation - * after a transfer. - * - * If you perform a pci_map_single() but wish to interrogate the buffer using - * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this - * function before doing so. At the next point you give the PCI dma address - * back to the card, the device again owns the buffer. - */ -static inline -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ -} - -static inline -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - -static inline -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - - -/* - * Make physical memory consistent for a set of streaming mode DMA translations - * after a transfer. - * - * The same as pci_dma_sync_single but for a scatter-gather list, same rules - * and usage. - */ -static inline -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction direction) -{ -} - -static inline -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - -static inline -int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return 0; -} - -/* - * Return whether the given PCI device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits during - * PCI bus mastering, then you would pass 0x00ffffff as the mask to this - * function. - */ -static inline -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, so we can't - * guarantee allocations that must be within a tighter range than - * GFP_DMA - */ - if (mask < 0x00ffffff) - return 0; - return 1; -} - -static inline -int dma_set_mask(struct device *dev, u64 mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - return 0; -} - -static inline -int dma_get_cache_alignment(void) -{ - return 1 << L1_CACHE_SHIFT; -} - -#define dma_is_consistent(d) (1) - -static inline -void dma_cache_sync(void *vaddr, size_t size, - enum dma_data_direction direction) -{ - mn10300_dcache_flush_inv(); -} - -#endif diff --git a/include/asm-mn10300/dma.h b/include/asm-mn10300/dma.h deleted file mode 100644 index 098df2e..0000000 --- a/include/asm-mn10300/dma.h +++ /dev/null @@ -1,118 +0,0 @@ -/* MN10300 ISA DMA handlers and definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -#include -#include -#include -#include - -#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */ -#define MAX_DMA_ADDRESS 0xbfffffff - -extern spinlock_t dma_spin_lock; - -static inline unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static inline void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static inline void enable_dma(unsigned int dmanr) -{ -} - -static inline void disable_dma(unsigned int dmanr) -{ -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static inline void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static inline void set_dma_mode(unsigned int dmanr, char mode) -{ -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static inline void set_dma_page(unsigned int dmanr, char pagenr) -{ -} - - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static inline void set_dma_addr(unsigned int dmanr, unsigned int a) -{ -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static inline void set_dma_count(unsigned int dmanr, unsigned int count) -{ -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static inline int get_dma_residue(unsigned int dmanr) -{ - return 0; -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char *device_id); -extern void free_dma(unsigned int dmanr); - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_DMA_H */ diff --git a/include/asm-mn10300/dmactl-regs.h b/include/asm-mn10300/dmactl-regs.h deleted file mode 100644 index 58a199d..0000000 --- a/include/asm-mn10300/dmactl-regs.h +++ /dev/null @@ -1,101 +0,0 @@ -/* MN10300 on-board DMA controller registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_DMACTL_REGS_H -#define _ASM_DMACTL_REGS_H - -#include - -#ifdef __KERNEL__ - -/* DMA registers */ -#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ -#define DMxCTR_BG 0x0000001f /* transfer request source */ -#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ -#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ -#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ -#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ -#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ -#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ -#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ -#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ -#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ -#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ -#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ -#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ -#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ -#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ -#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ -#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ -#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ -#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ -#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ -#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ -#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ -#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ -#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ -#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ -#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ -#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ -#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ -#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ -#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ -#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ -#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ -#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ -#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ -#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ -#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ -#define DMxCTR_RQM 0x00060000 /* external request input source mode */ -#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ -#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ -#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ -#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ -#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ -#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ - -#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ - -#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ - -#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ -#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ - -#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent - * size reg */ -#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ - -#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ -#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ -#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ -#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ - -#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ -#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ -#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ -#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ - -#ifndef __ASSEMBLY__ - -struct mn10300_dmactl_regs { - u32 ctr; - const void *src; - void *dst; - u32 siz; - u32 cyc; -} __attribute__((aligned(0x100))); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_DMACTL_REGS_H */ diff --git a/include/asm-mn10300/elf.h b/include/asm-mn10300/elf.h deleted file mode 100644 index bf09f8b..0000000 --- a/include/asm-mn10300/elf.h +++ /dev/null @@ -1,147 +0,0 @@ -/* MN10300 ELF constant and register definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_ELF_H -#define _ASM_ELF_H - -#include -#include -#include - -/* - * AM33 relocations - */ -#define R_MN10300_NONE 0 /* No reloc. */ -#define R_MN10300_32 1 /* Direct 32 bit. */ -#define R_MN10300_16 2 /* Direct 16 bit. */ -#define R_MN10300_8 3 /* Direct 8 bit. */ -#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */ -#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */ -#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */ -#define R_MN10300_24 9 /* Direct 24 bit. */ -#define R_MN10300_RELATIVE 23 /* Adjust by program base. */ - -/* - * ELF register definitions.. - */ -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -#define ELF_NFPREG 32 -typedef float elf_fpreg_t; - -typedef struct { - elf_fpreg_t fpregs[ELF_NFPREG]; - u_int32_t fpcr; -} elf_fpregset_t; - -extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); - -/* - * This is used to ensure we don't load something for the wrong architecture - */ -#define elf_check_arch(x) \ - (((x)->e_machine == EM_CYGNUS_MN10300) || \ - ((x)->e_machine == EM_MN10300)) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2LSB -#define ELF_ARCH EM_MN10300 - -/* - * ELF process initialiser - */ -#define ELF_PLAT_INIT(_r, load_addr) \ -do { \ - struct pt_regs *_ur = current->thread.uregs; \ - _ur->a3 = 0; _ur->a2 = 0; _ur->d3 = 0; _ur->d2 = 0; \ - _ur->mcvf = 0; _ur->mcrl = 0; _ur->mcrh = 0; _ur->mdrq = 0; \ - _ur->e1 = 0; _ur->e0 = 0; _ur->e7 = 0; _ur->e6 = 0; \ - _ur->e5 = 0; _ur->e4 = 0; _ur->e3 = 0; _ur->e2 = 0; \ - _ur->lar = 0; _ur->lir = 0; _ur->mdr = 0; \ - _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \ -} while (0) - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* - * This is the location that an ET_DYN program is loaded if exec'ed. Typical - * use of this is to invoke "./ld.so someprog" to test out a new version of - * the loader. We need to make sure that it is out of the way of the program - * that it will "exec", and that there is sufficient room for the brk. - * - must clear the VMALLOC area - */ -#define ELF_ET_DYN_BASE 0x04000000 - -/* - * regs is struct pt_regs, pr_reg is elf_gregset_t (which is - * now struct user_regs, they are different) - * - ELF_CORE_COPY_REGS has been guessed, and may be wrong - */ -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ -do { \ - pr_reg[0] = regs->a3; \ - pr_reg[1] = regs->a2; \ - pr_reg[2] = regs->d3; \ - pr_reg[3] = regs->d2; \ - pr_reg[4] = regs->mcvf; \ - pr_reg[5] = regs->mcrl; \ - pr_reg[6] = regs->mcrh; \ - pr_reg[7] = regs->mdrq; \ - pr_reg[8] = regs->e1; \ - pr_reg[9] = regs->e0; \ - pr_reg[10] = regs->e7; \ - pr_reg[11] = regs->e6; \ - pr_reg[12] = regs->e5; \ - pr_reg[13] = regs->e4; \ - pr_reg[14] = regs->e3; \ - pr_reg[15] = regs->e2; \ - pr_reg[16] = regs->sp; \ - pr_reg[17] = regs->lar; \ - pr_reg[18] = regs->lir; \ - pr_reg[19] = regs->mdr; \ - pr_reg[20] = regs->a1; \ - pr_reg[21] = regs->a0; \ - pr_reg[22] = regs->d1; \ - pr_reg[23] = regs->d0; \ - pr_reg[24] = regs->orig_d0; \ - pr_reg[25] = regs->epsw; \ - pr_reg[26] = regs->pc; \ -} while (0); - -/* - * This yields a mask that user programs can use to figure out what - * instruction set this CPU supports. This could be done in user space, - * but it's not easy, and we've already done it here. - */ -#define ELF_HWCAP (0) - -/* - * This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in - * intent than poking at uname or /proc/cpuinfo. - * - * For the moment, we have only optimizations for the Intel generations, - * but that could change... - */ -#define ELF_PLATFORM (NULL) - -#ifdef __KERNEL__ -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) -#endif - -#endif /* _ASM_ELF_H */ diff --git a/include/asm-mn10300/emergency-restart.h b/include/asm-mn10300/emergency-restart.h deleted file mode 100644 index 3711bd9..0000000 --- a/include/asm-mn10300/emergency-restart.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/errno.h b/include/asm-mn10300/errno.h deleted file mode 100644 index 4c82b50..0000000 --- a/include/asm-mn10300/errno.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/exceptions.h b/include/asm-mn10300/exceptions.h deleted file mode 100644 index fa16466..0000000 --- a/include/asm-mn10300/exceptions.h +++ /dev/null @@ -1,121 +0,0 @@ -/* MN10300 Microcontroller core exceptions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_EXCEPTIONS_H -#define _ASM_EXCEPTIONS_H - -#include - -/* - * define the breakpoint instruction opcode to use - * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can - * (can use 0xF7) - */ -#define GDBSTUB_BKPT 0xFF - -#ifndef __ASSEMBLY__ - -/* - * enumeration of exception codes (as extracted from TBR MSW) - */ -enum exception_code { - EXCEP_RESET = 0x000000, /* reset */ - - /* MMU exceptions */ - EXCEP_ITLBMISS = 0x000100, /* instruction TLB miss */ - EXCEP_DTLBMISS = 0x000108, /* data TLB miss */ - EXCEP_IAERROR = 0x000110, /* instruction address */ - EXCEP_DAERROR = 0x000118, /* data address */ - - /* system exceptions */ - EXCEP_TRAP = 0x000128, /* program interrupt (PI instruction) */ - EXCEP_ISTEP = 0x000130, /* single step */ - EXCEP_IBREAK = 0x000150, /* instruction breakpoint */ - EXCEP_OBREAK = 0x000158, /* operand breakpoint */ - EXCEP_PRIVINS = 0x000160, /* privileged instruction execution */ - EXCEP_UNIMPINS = 0x000168, /* unimplemented instruction execution */ - EXCEP_UNIMPEXINS = 0x000170, /* unimplemented extended instruction execution */ - EXCEP_MEMERR = 0x000178, /* illegal memory access */ - EXCEP_MISALIGN = 0x000180, /* misalignment */ - EXCEP_BUSERROR = 0x000188, /* bus error */ - EXCEP_ILLINSACC = 0x000190, /* illegal instruction access */ - EXCEP_ILLDATACC = 0x000198, /* illegal data access */ - EXCEP_IOINSACC = 0x0001a0, /* I/O space instruction access */ - EXCEP_PRIVINSACC = 0x0001a8, /* privileged space instruction access */ - EXCEP_PRIVDATACC = 0x0001b0, /* privileged space data access */ - EXCEP_DATINSACC = 0x0001b8, /* data space instruction access */ - EXCEP_DOUBLE_FAULT = 0x000200, /* double fault */ - - /* FPU exceptions */ - EXCEP_FPU_DISABLED = 0x0001c0, /* FPU disabled */ - EXCEP_FPU_UNIMPINS = 0x0001c8, /* FPU unimplemented operation */ - EXCEP_FPU_OPERATION = 0x0001d0, /* FPU operation */ - - /* interrupts */ - EXCEP_WDT = 0x000240, /* watchdog timer overflow */ - EXCEP_NMI = 0x000248, /* non-maskable interrupt */ - EXCEP_IRQ_LEVEL0 = 0x000280, /* level 0 maskable interrupt */ - EXCEP_IRQ_LEVEL1 = 0x000288, /* level 1 maskable interrupt */ - EXCEP_IRQ_LEVEL2 = 0x000290, /* level 2 maskable interrupt */ - EXCEP_IRQ_LEVEL3 = 0x000298, /* level 3 maskable interrupt */ - EXCEP_IRQ_LEVEL4 = 0x0002a0, /* level 4 maskable interrupt */ - EXCEP_IRQ_LEVEL5 = 0x0002a8, /* level 5 maskable interrupt */ - EXCEP_IRQ_LEVEL6 = 0x0002b0, /* level 6 maskable interrupt */ - - /* system calls */ - EXCEP_SYSCALL0 = 0x000300, /* system call 0 */ - EXCEP_SYSCALL1 = 0x000308, /* system call 1 */ - EXCEP_SYSCALL2 = 0x000310, /* system call 2 */ - EXCEP_SYSCALL3 = 0x000318, /* system call 3 */ - EXCEP_SYSCALL4 = 0x000320, /* system call 4 */ - EXCEP_SYSCALL5 = 0x000328, /* system call 5 */ - EXCEP_SYSCALL6 = 0x000330, /* system call 6 */ - EXCEP_SYSCALL7 = 0x000338, /* system call 7 */ - EXCEP_SYSCALL8 = 0x000340, /* system call 8 */ - EXCEP_SYSCALL9 = 0x000348, /* system call 9 */ - EXCEP_SYSCALL10 = 0x000350, /* system call 10 */ - EXCEP_SYSCALL11 = 0x000358, /* system call 11 */ - EXCEP_SYSCALL12 = 0x000360, /* system call 12 */ - EXCEP_SYSCALL13 = 0x000368, /* system call 13 */ - EXCEP_SYSCALL14 = 0x000370, /* system call 14 */ - EXCEP_SYSCALL15 = 0x000378, /* system call 15 */ -}; - -extern void __set_intr_stub(enum exception_code code, void *handler); -extern void set_intr_stub(enum exception_code code, void *handler); -extern void set_jtag_stub(enum exception_code code, void *handler); - -struct pt_regs; - -extern asmlinkage void __common_exception(void); -extern asmlinkage void itlb_miss(void); -extern asmlinkage void dtlb_miss(void); -extern asmlinkage void itlb_aerror(void); -extern asmlinkage void dtlb_aerror(void); -extern asmlinkage void raw_bus_error(void); -extern asmlinkage void double_fault(void); -extern asmlinkage int system_call(struct pt_regs *); -extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); -extern asmlinkage void nmi(struct pt_regs *, enum exception_code); -extern asmlinkage void uninitialised_exception(struct pt_regs *, - enum exception_code); -extern asmlinkage void irq_handler(void); -extern asmlinkage void profile_handler(void); -extern asmlinkage void nmi_handler(void); -extern asmlinkage void misalignment(struct pt_regs *, enum exception_code); - -extern void die(const char *, struct pt_regs *, enum exception_code) - ATTRIB_NORET; - -extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code); - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_EXCEPTIONS_H */ diff --git a/include/asm-mn10300/fb.h b/include/asm-mn10300/fb.h deleted file mode 100644 index 697b24a..0000000 --- a/include/asm-mn10300/fb.h +++ /dev/null @@ -1,23 +0,0 @@ -/* MN10300 Frame buffer stuff - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_FB_H -#define _ASM_FB_H - -#include - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H */ diff --git a/include/asm-mn10300/fcntl.h b/include/asm-mn10300/fcntl.h deleted file mode 100644 index 46ab12d..0000000 --- a/include/asm-mn10300/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/fpu.h b/include/asm-mn10300/fpu.h deleted file mode 100644 index 64a2b83..0000000 --- a/include/asm-mn10300/fpu.h +++ /dev/null @@ -1,85 +0,0 @@ -/* MN10300 FPU definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_FPU_H -#define _ASM_FPU_H - -#include -#include -#include - -#ifdef __KERNEL__ - -/* the task that owns the FPU state */ -extern struct task_struct *fpu_state_owner; - -#define set_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \ -} while (0) - -#define clear_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \ -} while (0) - -#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) - -#define unlazy_fpu(tsk) \ -do { \ - preempt_disable(); \ - if (fpu_state_owner == (tsk)) \ - fpu_save(&tsk->thread.fpu_state); \ - preempt_enable(); \ -} while (0) - -#define exit_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) \ - fpu_state_owner = NULL; \ - preempt_enable(); \ -} while (0) - -#define flush_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) { \ - fpu_state_owner = NULL; \ - __tsk->thread.uregs->epsw &= ~EPSW_FE; \ - } \ - preempt_enable(); \ - clear_using_fpu(__tsk); \ -} while (0) - -extern asmlinkage void fpu_init_state(void); -extern asmlinkage void fpu_kill_state(struct task_struct *); -extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code); -extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); - -#ifdef CONFIG_FPU -extern asmlinkage void fpu_save(struct fpu_state_struct *); -extern asmlinkage void fpu_restore(struct fpu_state_struct *); -#else -#define fpu_save(a) -#define fpu_restore(a) -#endif /* CONFIG_FPU */ - -/* - * signal frame handlers - */ -extern int fpu_setup_sigcontext(struct fpucontext *buf); -extern int fpu_restore_sigcontext(struct fpucontext *buf); - -#endif /* __KERNEL__ */ -#endif /* _ASM_FPU_H */ diff --git a/include/asm-mn10300/frame.inc b/include/asm-mn10300/frame.inc deleted file mode 100644 index 5b1949b..0000000 --- a/include/asm-mn10300/frame.inc +++ /dev/null @@ -1,91 +0,0 @@ -/* MN10300 Microcontroller core system register definitions -*- asm -*- - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_FRAME_INC -#define _ASM_FRAME_INC - -#ifndef __ASSEMBLY__ -#error not for use in C files -#endif - -#ifndef __ASM_OFFSETS_H__ -#include -#endif - -#define pi break - -#define fp a3 - -############################################################################### -# -# build a stack frame from the registers -# - the caller has subtracted 4 from SP before coming here -# -############################################################################### -.macro SAVE_ALL - add -4,sp # next exception frame ptr save area - movm [other],(sp) - mov usp,a1 - mov a1,(sp) # USP in MOVM[other] dummy slot - movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) - mov sp,fp # FRAME pointer in A3 - add -12,sp # allow for calls to be made - mov (__frame),a1 - mov a1,(REG_NEXT,fp) - mov fp,(__frame) - - and ~EPSW_FE,epsw # disable the FPU inside the kernel - - # we may be holding current in E2 -#ifdef CONFIG_MN10300_CURRENT_IN_E2 - mov (__current),e2 -#endif -.endm - -############################################################################### -# -# restore the registers from a stack frame -# -############################################################################### -.macro RESTORE_ALL - # peel back the stack to the calling frame - # - this permits execve() to discard extra frames due to kernel syscalls - mov (__frame),fp - mov fp,sp - mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 - mov d0,(__frame) - -#ifndef CONFIG_MN10300_USING_JTAG - mov (REG_EPSW,fp),d0 - btst EPSW_T,d0 - beq 99f - - or EPSW_NMID,epsw - movhu (DCR),d1 - or 0x0001, d1 - movhu d1,(DCR) - -99: -#endif - movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother] - - # must restore usp even if returning to kernel space, - # when CONFIG_PREEMPT is enabled. - mov (sp),a1 # USP in MOVM[other] dummy slot - mov a1,usp - - movm (sp),[other] - add 8,sp - rti - -.endm - - -#endif /* _ASM_FRAME_INC */ diff --git a/include/asm-mn10300/ftrace.h b/include/asm-mn10300/ftrace.h deleted file mode 100644 index 40a8c17..0000000 --- a/include/asm-mn10300/ftrace.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-mn10300/futex.h b/include/asm-mn10300/futex.h deleted file mode 100644 index 0b74582..0000000 --- a/include/asm-mn10300/futex.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/gdb-stub.h b/include/asm-mn10300/gdb-stub.h deleted file mode 100644 index e5a6368..0000000 --- a/include/asm-mn10300/gdb-stub.h +++ /dev/null @@ -1,183 +0,0 @@ -/* MN10300 Kernel GDB stub definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_GDB_STUB_H -#define _ASM_GDB_STUB_H - -#include - -/* - * register ID numbers in GDB remote protocol - */ - -#define GDB_REGID_PC 9 -#define GDB_REGID_FP 7 -#define GDB_REGID_SP 8 - -/* - * virtual stack layout for the GDB exception handler - */ -#define NUMREGS 64 - -#define GDB_FR_D0 (0 * 4) -#define GDB_FR_D1 (1 * 4) -#define GDB_FR_D2 (2 * 4) -#define GDB_FR_D3 (3 * 4) -#define GDB_FR_A0 (4 * 4) -#define GDB_FR_A1 (5 * 4) -#define GDB_FR_A2 (6 * 4) -#define GDB_FR_A3 (7 * 4) - -#define GDB_FR_SP (8 * 4) -#define GDB_FR_PC (9 * 4) -#define GDB_FR_MDR (10 * 4) -#define GDB_FR_EPSW (11 * 4) -#define GDB_FR_LIR (12 * 4) -#define GDB_FR_LAR (13 * 4) -#define GDB_FR_MDRQ (14 * 4) - -#define GDB_FR_E0 (15 * 4) -#define GDB_FR_E1 (16 * 4) -#define GDB_FR_E2 (17 * 4) -#define GDB_FR_E3 (18 * 4) -#define GDB_FR_E4 (19 * 4) -#define GDB_FR_E5 (20 * 4) -#define GDB_FR_E6 (21 * 4) -#define GDB_FR_E7 (22 * 4) - -#define GDB_FR_SSP (23 * 4) -#define GDB_FR_MSP (24 * 4) -#define GDB_FR_USP (25 * 4) -#define GDB_FR_MCRH (26 * 4) -#define GDB_FR_MCRL (27 * 4) -#define GDB_FR_MCVF (28 * 4) - -#define GDB_FR_FPCR (29 * 4) -#define GDB_FR_DUMMY0 (30 * 4) -#define GDB_FR_DUMMY1 (31 * 4) - -#define GDB_FR_FS0 (32 * 4) - -#define GDB_FR_SIZE (NUMREGS * 4) - -#ifndef __ASSEMBLY__ - -/* - * This is the same as above, but for the high-level - * part of the GDB stub. - */ - -struct gdb_regs { - /* saved main processor registers */ - u32 d0, d1, d2, d3, a0, a1, a2, a3; - u32 sp, pc, mdr, epsw, lir, lar, mdrq; - u32 e0, e1, e2, e3, e4, e5, e6, e7; - u32 ssp, msp, usp, mcrh, mcrl, mcvf; - - /* saved floating point registers */ - u32 fpcr, _dummy0, _dummy1; - u32 fs0, fs1, fs2, fs3, fs4, fs5, fs6, fs7; - u32 fs8, fs9, fs10, fs11, fs12, fs13, fs14, fs15; - u32 fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23; - u32 fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31; -}; - -/* - * Prototypes - */ -extern void show_registers_only(struct pt_regs *regs); - -extern asmlinkage void gdbstub_init(void); -extern asmlinkage void gdbstub_exit(int status); -extern asmlinkage void gdbstub_io_init(void); -extern asmlinkage void gdbstub_io_set_baud(unsigned baud); -extern asmlinkage int gdbstub_io_rx_char(unsigned char *_ch, int nonblock); -extern asmlinkage void gdbstub_io_tx_char(unsigned char ch); -extern asmlinkage void gdbstub_io_tx_flush(void); - -extern asmlinkage void gdbstub_io_rx_handler(void); -extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code); -extern asmlinkage int gdbstub_intercept(struct pt_regs *, enum exception_code); -extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code); -extern asmlinkage void __gdbstub_bug_trap(void); -extern asmlinkage void __gdbstub_pause(void); -extern asmlinkage void start_kernel(void); - -#ifndef CONFIG_MN10300_CACHE_DISABLED -extern asmlinkage void gdbstub_purge_cache(void); -#else -#define gdbstub_purge_cache() do {} while (0) -#endif - -/* Used to prevent crashes in memory access */ -extern asmlinkage int gdbstub_read_byte(const u8 *, u8 *); -extern asmlinkage int gdbstub_read_word(const u8 *, u8 *); -extern asmlinkage int gdbstub_read_dword(const u8 *, u8 *); -extern asmlinkage int gdbstub_write_byte(u32, u8 *); -extern asmlinkage int gdbstub_write_word(u32, u8 *); -extern asmlinkage int gdbstub_write_dword(u32, u8 *); - -extern asmlinkage void gdbstub_read_byte_guard(void); -extern asmlinkage void gdbstub_read_byte_cont(void); -extern asmlinkage void gdbstub_read_word_guard(void); -extern asmlinkage void gdbstub_read_word_cont(void); -extern asmlinkage void gdbstub_read_dword_guard(void); -extern asmlinkage void gdbstub_read_dword_cont(void); -extern asmlinkage void gdbstub_write_byte_guard(void); -extern asmlinkage void gdbstub_write_byte_cont(void); -extern asmlinkage void gdbstub_write_word_guard(void); -extern asmlinkage void gdbstub_write_word_cont(void); -extern asmlinkage void gdbstub_write_dword_guard(void); -extern asmlinkage void gdbstub_write_dword_cont(void); - -extern u8 gdbstub_rx_buffer[PAGE_SIZE]; -extern u32 gdbstub_rx_inp; -extern u32 gdbstub_rx_outp; -extern u8 gdbstub_rx_overflow; -extern u8 gdbstub_busy; -extern u8 gdbstub_rx_unget; - -#ifdef CONFIG_GDBSTUB_DEBUGGING -extern void gdbstub_printk(const char *fmt, ...) - __attribute__((format(printf, 1, 2))); -#else -static inline __attribute__((format(printf, 1, 2))) -void gdbstub_printk(const char *fmt, ...) -{ -} -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY -#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_entry(FMT, ...) ({ 0; }) -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL -#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_proto(FMT, ...) ({ 0; }) -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_IO -#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_io(FMT, ...) ({ 0; }) -#endif - -#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT -#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_bkpt(FMT, ...) ({ 0; }) -#endif - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_GDB_STUB_H */ diff --git a/include/asm-mn10300/hardirq.h b/include/asm-mn10300/hardirq.h deleted file mode 100644 index 54d9501..0000000 --- a/include/asm-mn10300/hardirq.h +++ /dev/null @@ -1,48 +0,0 @@ -/* MN10300 Hardware IRQ statistics and management - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_HARDIRQ_H -#define _ASM_HARDIRQ_H - -#include -#include -#include - -/* assembly code in softirq.h is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; - unsigned long idle_timestamp; - unsigned int __nmi_count; /* arch dependent */ - unsigned int __irq_count; /* arch dependent */ -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -extern void ack_bad_irq(int irq); - -/* - * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table - * - these should jump to __common_exception in entry.S unless there's a good - * reason to do otherwise (see trap_preinit() in traps.c) - */ -typedef void (*intr_stub_fnx)(struct pt_regs *regs, - enum exception_code intcode); - -/* - * manipulate pointers in the Exception table (see entry.S) - * - these are indexed by decoding the lower 24 bits of the TBR register - * - note that the MN103E010 doesn't always trap through the correct vector, - * but does always set the TBR correctly - */ -extern asmlinkage void set_excp_vector(enum exception_code code, - intr_stub_fnx handler); - -#endif /* _ASM_HARDIRQ_H */ diff --git a/include/asm-mn10300/highmem.h b/include/asm-mn10300/highmem.h deleted file mode 100644 index 90f2abb..0000000 --- a/include/asm-mn10300/highmem.h +++ /dev/null @@ -1,116 +0,0 @@ -/* MN10300 Virtual kernel memory mappings for high memory - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-i386/highmem.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -/* undef for production */ -#undef HIGHMEM_DEBUG - -/* declarations for highmem.c */ -extern unsigned long highstart_pfn, highend_pfn; - -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; -extern pte_t *pkmap_page_table; - -extern void __init kmap_init(void); - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - */ -#define PKMAP_BASE 0xfe000000UL -#define LAST_PKMAP 1024 -#define LAST_PKMAP_MASK (LAST_PKMAP - 1) -#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -extern unsigned long kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -static inline unsigned long kmap(struct page *page) -{ - if (in_interrupt()) - BUG(); - if (page < highmem_start_page) - return page_address(page); - return kmap_high(page); -} - -static inline void kunmap(struct page *page) -{ - if (in_interrupt()) - BUG(); - if (page < highmem_start_page) - return; - kunmap_high(page); -} - -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -static inline unsigned long kmap_atomic(struct page *page, enum km_type type) -{ - enum fixed_addresses idx; - unsigned long vaddr; - - if (page < highmem_start_page) - return page_address(page); - - debug_kmap_atomic(type); - idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); -#if HIGHMEM_DEBUG - if (!pte_none(*(kmap_pte - idx))) - BUG(); -#endif - set_pte(kmap_pte - idx, mk_pte(page, kmap_prot)); - __flush_tlb_one(vaddr); - - return vaddr; -} - -static inline void kunmap_atomic(unsigned long vaddr, enum km_type type) -{ -#if HIGHMEM_DEBUG - enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id(); - - if (vaddr < FIXADDR_START) /* FIXME */ - return; - - if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)) - BUG(); - - /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it - */ - pte_clear(kmap_pte - idx); - __flush_tlb_one(vaddr); -#endif -} - -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-mn10300/hw_irq.h b/include/asm-mn10300/hw_irq.h deleted file mode 100644 index 7061990..0000000 --- a/include/asm-mn10300/hw_irq.h +++ /dev/null @@ -1,14 +0,0 @@ -/* MN10300 Hardware interrupt definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -#endif /* _ASM_HW_IRQ_H */ diff --git a/include/asm-mn10300/intctl-regs.h b/include/asm-mn10300/intctl-regs.h deleted file mode 100644 index ba544c7..0000000 --- a/include/asm-mn10300/intctl-regs.h +++ /dev/null @@ -1,73 +0,0 @@ -/* MN10300 On-board interrupt controller registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_INTCTL_REGS_H -#define _ASM_INTCTL_REGS_H - -#include - -#ifdef __KERNEL__ - -/* interrupt controller registers */ -#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */ - -#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */ -#define IAGR_GN 0x00fc /* group number register - * (documentation _has_ to be wrong) - */ - -#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */ -#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3) - -#define SET_XIRQ_TRIGGER(X,Y) \ -do { \ - u16 x = EXTMD; \ - x &= ~(3 << ((X) * 2)); \ - x |= ((Y) & 3) << ((X) * 2); \ - EXTMD = x; \ -} while (0) - -#define XIRQ_TRIGGER_LOWLEVEL 0 -#define XIRQ_TRIGGER_HILEVEL 1 -#define XIRQ_TRIGGER_NEGEDGE 2 -#define XIRQ_TRIGGER_POSEDGE 3 - -/* non-maskable interrupt control */ -#define NMIIRQ 0 -#define NMICR GxICR(NMIIRQ) /* NMI control register */ -#define NMICR_NMIF 0x0001 /* NMI pin interrupt flag */ -#define NMICR_WDIF 0x0002 /* watchdog timer overflow flag */ -#define NMICR_ABUSERR 0x0008 /* async bus error flag */ - -/* maskable interrupt control */ -#define GxICR_DETECT 0x0001 /* interrupt detect flag */ -#define GxICR_REQUEST 0x0010 /* interrupt request flag */ -#define GxICR_ENABLE 0x0100 /* interrupt enable flag */ -#define GxICR_LEVEL 0x7000 /* interrupt priority level */ -#define GxICR_LEVEL_0 0x0000 /* - level 0 */ -#define GxICR_LEVEL_1 0x1000 /* - level 1 */ -#define GxICR_LEVEL_2 0x2000 /* - level 2 */ -#define GxICR_LEVEL_3 0x3000 /* - level 3 */ -#define GxICR_LEVEL_4 0x4000 /* - level 4 */ -#define GxICR_LEVEL_5 0x5000 /* - level 5 */ -#define GxICR_LEVEL_6 0x6000 /* - level 6 */ -#define GxICR_LEVEL_SHIFT 12 - -#ifndef __ASSEMBLY__ -extern void set_intr_level(int irq, u16 level); -extern void set_intr_postackable(int irq); -#endif - -/* external interrupts */ -#define XIRQxICR(X) GxICR((X)) /* external interrupt control regs */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_INTCTL_REGS_H */ diff --git a/include/asm-mn10300/io.h b/include/asm-mn10300/io.h deleted file mode 100644 index c1a4119..0000000 --- a/include/asm-mn10300/io.h +++ /dev/null @@ -1,301 +0,0 @@ -/* MN10300 I/O port emulation and memory-mapped I/O - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_IO_H -#define _ASM_IO_H - -#include /* I/O is all done through memory accesses */ -#include -#include - -#define mmiowb() do {} while (0) - -/*****************************************************************************/ -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. - */ -static inline u8 readb(const volatile void __iomem *addr) -{ - return *(const volatile u8 *) addr; -} - -static inline u16 readw(const volatile void __iomem *addr) -{ - return *(const volatile u16 *) addr; -} - -static inline u32 readl(const volatile void __iomem *addr) -{ - return *(const volatile u32 *) addr; -} - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl - -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - -static inline void writeb(u8 b, volatile void __iomem *addr) -{ - *(volatile u8 *) addr = b; -} - -static inline void writew(u16 b, volatile void __iomem *addr) -{ - *(volatile u16 *) addr = b; -} - -static inline void writel(u32 b, volatile void __iomem *addr) -{ - *(volatile u32 *) addr = b; -} - -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -/*****************************************************************************/ -/* - * traditional input/output functions - */ -static inline u8 inb_local(unsigned long addr) -{ - return readb((volatile void __iomem *) addr); -} - -static inline void outb_local(u8 b, unsigned long addr) -{ - return writeb(b, (volatile void __iomem *) addr); -} - -static inline u8 inb(unsigned long addr) -{ - return readb((volatile void __iomem *) addr); -} - -static inline u16 inw(unsigned long addr) -{ - return readw((volatile void __iomem *) addr); -} - -static inline u32 inl(unsigned long addr) -{ - return readl((volatile void __iomem *) addr); -} - -static inline void outb(u8 b, unsigned long addr) -{ - return writeb(b, (volatile void __iomem *) addr); -} - -static inline void outw(u16 b, unsigned long addr) -{ - return writew(b, (volatile void __iomem *) addr); -} - -static inline void outl(u32 b, unsigned long addr) -{ - return writel(b, (volatile void __iomem *) addr); -} - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x, addr) outb((x), (addr)) -#define outw_p(x, addr) outw((x), (addr)) -#define outl_p(x, addr) outl((x), (addr)) - -static inline void insb(unsigned long addr, void *buffer, int count) -{ - if (count) { - u8 *buf = buffer; - do { - u8 x = inb(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void insw(unsigned long addr, void *buffer, int count) -{ - if (count) { - u16 *buf = buffer; - do { - u16 x = inw(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void insl(unsigned long addr, void *buffer, int count) -{ - if (count) { - u32 *buf = buffer; - do { - u32 x = inl(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void outsb(unsigned long addr, const void *buffer, int count) -{ - if (count) { - const u8 *buf = buffer; - do { - outb(*buf++, addr); - } while (--count); - } -} - -static inline void outsw(unsigned long addr, const void *buffer, int count) -{ - if (count) { - const u16 *buf = buffer; - do { - outw(*buf++, addr); - } while (--count); - } -} - -extern void __outsl(unsigned long addr, const void *buffer, int count); -static inline void outsl(unsigned long addr, const void *buffer, int count) -{ - if ((unsigned long) buffer & 0x3) - return __outsl(addr, buffer, count); - - if (count) { - const u32 *buf = buffer; - do { - outl(*buf++, addr); - } while (--count); - } -} - -#define ioread8(addr) readb(addr) -#define ioread16(addr) readw(addr) -#define ioread32(addr) readl(addr) - -#define iowrite8(v, addr) writeb((v), (addr)) -#define iowrite16(v, addr) writew((v), (addr)) -#define iowrite32(v, addr) writel((v), (addr)) - -#define ioread8_rep(p, dst, count) \ - insb((unsigned long) (p), (dst), (count)) -#define ioread16_rep(p, dst, count) \ - insw((unsigned long) (p), (dst), (count)) -#define ioread32_rep(p, dst, count) \ - insl((unsigned long) (p), (dst), (count)) - -#define iowrite8_rep(p, src, count) \ - outsb((unsigned long) (p), (src), (count)) -#define iowrite16_rep(p, src, count) \ - outsw((unsigned long) (p), (src), (count)) -#define iowrite32_rep(p, src, count) \ - outsl((unsigned long) (p), (src), (count)) - - -#define IO_SPACE_LIMIT 0xffffffff - -#ifdef __KERNEL__ - -#include -#define __io_virt(x) ((void *) (x)) - -/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ -struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) -{ -} - -/* - * Change virtual addresses to physical addresses and vv. - * These are pretty trivial - */ -static inline unsigned long virt_to_phys(volatile void *address) -{ - return __pa(address); -} - -static inline void *phys_to_virt(unsigned long address) -{ - return __va(address); -} - -/* - * Change "struct page" to physical address. - */ -static inline void *__ioremap(unsigned long offset, unsigned long size, - unsigned long flags) -{ - return (void *) offset; -} - -static inline void *ioremap(unsigned long offset, unsigned long size) -{ - return (void *) offset; -} - -/* - * This one maps high address device memory and turns off caching for that - * area. it's useful if some control registers are in such an area and write - * combining or read caching is not desirable: - */ -static inline void *ioremap_nocache(unsigned long offset, unsigned long size) -{ - return (void *) (offset | 0x20000000); -} - -#define ioremap_wc ioremap_nocache - -static inline void iounmap(void *addr) -{ -} - -static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - return (void __iomem *) port; -} - -static inline void ioport_unmap(void __iomem *p) -{ -} - -#define xlate_dev_kmem_ptr(p) ((void *) (p)) -#define xlate_dev_mem_ptr(p) ((void *) (p)) - -/* - * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff - */ -static inline unsigned long virt_to_bus(volatile void *address) -{ - return ((unsigned long) address) & ~0x20000000; -} - -static inline void *bus_to_virt(unsigned long address) -{ - return (void *) address; -} - -#define page_to_bus page_to_phys - -#define memset_io(a, b, c) memset(__io_virt(a), (b), (c)) -#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c)) -#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c)) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IO_H */ diff --git a/include/asm-mn10300/ioctl.h b/include/asm-mn10300/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/include/asm-mn10300/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/ioctls.h b/include/asm-mn10300/ioctls.h deleted file mode 100644 index dcbfb45..0000000 --- a/include/asm-mn10300/ioctls.h +++ /dev/null @@ -1,88 +0,0 @@ -#ifndef _ASM_IOCTLS_H -#define _ASM_IOCTLS_H - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 0x2A, struct termios2) -#define TCSETS2 _IOW('T', 0x2B, struct termios2) -#define TCSETSW2 _IOW('T', 0x2C, struct termios2) -#define TCSETSF2 _IOW('T', 0x2D, struct termios2) -#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number - * (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ -#define FIOQSIZE 0x5460 - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* _ASM_IOCTLS_H */ diff --git a/include/asm-mn10300/ipc.h b/include/asm-mn10300/ipc.h deleted file mode 100644 index a46e3d9..0000000 --- a/include/asm-mn10300/ipc.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/ipcbuf.h b/include/asm-mn10300/ipcbuf.h deleted file mode 100644 index f6f63d4..0000000 --- a/include/asm-mn10300/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASM_IPCBUF_H -#define _ASM_IPCBUF_H - -/* - * The ipc64_perm structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_IPCBUF_H */ diff --git a/include/asm-mn10300/irq.h b/include/asm-mn10300/irq.h deleted file mode 100644 index 53b3801..0000000 --- a/include/asm-mn10300/irq.h +++ /dev/null @@ -1,32 +0,0 @@ -/* MN10300 Hardware interrupt definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - Derived from include/asm-i386/irq.h: - * - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -#include -#include -#include - -/* this number is used when no interrupt has been assigned */ -#define NO_IRQ INT_MAX - -/* hardware irq numbers */ -#define NR_IRQS GxICR_NUM_IRQS - -/* external hardware irq numbers */ -#define NR_XIRQS GxICR_NUM_XIRQS - -#define irq_canonicalize(IRQ) (IRQ) - -#endif /* _ASM_IRQ_H */ diff --git a/include/asm-mn10300/irq_regs.h b/include/asm-mn10300/irq_regs.h deleted file mode 100644 index a848cd2..0000000 --- a/include/asm-mn10300/irq_regs.h +++ /dev/null @@ -1,24 +0,0 @@ -/* MN10300 IRQ registers pointer definition - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_IRQ_REGS_H -#define _ASM_IRQ_REGS_H - -/* - * Per-cpu current frame pointer - the location of the last exception frame on - * the stack - */ -#define ARCH_HAS_OWN_IRQ_REGS - -#ifndef __ASSEMBLY__ -#define get_irq_regs() (__frame) -#endif - -#endif /* _ASM_IRQ_REGS_H */ diff --git a/include/asm-mn10300/kdebug.h b/include/asm-mn10300/kdebug.h deleted file mode 100644 index 0f47e11..0000000 --- a/include/asm-mn10300/kdebug.h +++ /dev/null @@ -1,22 +0,0 @@ -/* MN10300 In-kernel death knells - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_KDEBUG_H -#define _ASM_KDEBUG_H - -/* Grossly misnamed. */ -enum die_val { - DIE_OOPS = 1, - DIE_BREAKPOINT, - DIE_GPF, -}; - -#endif /* _ASM_KDEBUG_H */ diff --git a/include/asm-mn10300/kmap_types.h b/include/asm-mn10300/kmap_types.h deleted file mode 100644 index 3398f9f..0000000 --- a/include/asm-mn10300/kmap_types.h +++ /dev/null @@ -1,31 +0,0 @@ -/* MN10300 kmap_atomic() slot IDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif /* _ASM_KMAP_TYPES_H */ diff --git a/include/asm-mn10300/kprobes.h b/include/asm-mn10300/kprobes.h deleted file mode 100644 index c800b59..0000000 --- a/include/asm-mn10300/kprobes.h +++ /dev/null @@ -1,50 +0,0 @@ -/* MN10300 Kernel Probes support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public Licence as published by - * the Free Software Foundation; either version 2 of the Licence, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public Licence for more details. - * - * You should have received a copy of the GNU General Public Licence - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ -#ifndef _ASM_KPROBES_H -#define _ASM_KPROBES_H - -#include -#include - -struct kprobe; - -typedef unsigned char kprobe_opcode_t; -#define BREAKPOINT_INSTRUCTION 0xff -#define MAX_INSN_SIZE 8 -#define MAX_STACK_SIZE 128 - -/* Architecture specific copy of original instruction */ -struct arch_specific_insn { - /* copy of original instruction - */ - kprobe_opcode_t insn[MAX_INSN_SIZE]; -}; - -extern const int kretprobe_blacklist_size; - -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); - -#define flush_insn_slot(p) do {} while (0) - -extern void arch_remove_kprobe(struct kprobe *p); - -#endif /* _ASM_KPROBES_H */ diff --git a/include/asm-mn10300/linkage.h b/include/asm-mn10300/linkage.h deleted file mode 100644 index dda3002..0000000 --- a/include/asm-mn10300/linkage.h +++ /dev/null @@ -1,20 +0,0 @@ -/* MN10300 Linkage and calling-convention overrides - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_LINKAGE_H -#define _ASM_LINKAGE_H - -/* don't override anything */ -#define asmlinkage - -#define __ALIGN .align 4,0xcb -#define __ALIGN_STR ".align 4,0xcb" - -#endif diff --git a/include/asm-mn10300/local.h b/include/asm-mn10300/local.h deleted file mode 100644 index c11c530..0000000 --- a/include/asm-mn10300/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/mc146818rtc.h b/include/asm-mn10300/mc146818rtc.h deleted file mode 100644 index df6bc6e..0000000 --- a/include/asm-mn10300/mc146818rtc.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/mman.h b/include/asm-mn10300/mman.h deleted file mode 100644 index b7986b6..0000000 --- a/include/asm-mn10300/mman.h +++ /dev/null @@ -1,28 +0,0 @@ -/* MN10300 Constants for mmap and co. - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - Derived from asm-x86/mman.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_MMAN_H -#define _ASM_MMAN_H - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* _ASM_MMAN_H */ diff --git a/include/asm-mn10300/mmu.h b/include/asm-mn10300/mmu.h deleted file mode 100644 index 2d2d097..0000000 --- a/include/asm-mn10300/mmu.h +++ /dev/null @@ -1,19 +0,0 @@ -/* MN10300 Memory management context - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-frv/mmu.h - */ - -#ifndef _ASM_MMU_H -#define _ASM_MMU_H - -/* - * MMU context - */ -typedef struct { - unsigned long tlbpid[NR_CPUS]; /* TLB PID for this process on - * each CPU */ -} mm_context_t; - -#endif /* _ASM_MMU_H */ diff --git a/include/asm-mn10300/mmu_context.h b/include/asm-mn10300/mmu_context.h deleted file mode 100644 index a9e2e34..0000000 --- a/include/asm-mn10300/mmu_context.h +++ /dev/null @@ -1,138 +0,0 @@ -/* MN10300 MMU context management - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - Derived from include/asm-m32r/mmu_context.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * - * This implements an algorithm to provide TLB PID mappings to provide - * selective access to the TLB for processes, thus reducing the number of TLB - * flushes required. - * - * Note, however, that the M32R algorithm is technically broken as it does not - * handle version wrap-around, and could, theoretically, have a problem with a - * very long lived program that sleeps long enough for the version number to - * wrap all the way around so that its TLB mappings appear valid once again. - */ -#ifndef _ASM_MMU_CONTEXT_H -#define _ASM_MMU_CONTEXT_H - -#include -#include -#include -#include - -#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL -#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL -#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL -#define MMU_NO_CONTEXT 0x00000000UL - -extern unsigned long mmu_context_cache[NR_CPUS]; -#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) - -#define enter_lazy_tlb(mm, tsk) do {} while (0) - -#ifdef CONFIG_SMP -#define cpu_ran_vm(cpu, task) \ - cpu_set((cpu), (task)->cpu_vm_mask) -#define cpu_maybe_ran_vm(cpu, task) \ - cpu_test_and_set((cpu), (task)->cpu_vm_mask) -#else -#define cpu_ran_vm(cpu, task) do {} while (0) -#define cpu_maybe_ran_vm(cpu, task) true -#endif /* CONFIG_SMP */ - -/* - * allocate an MMU context - */ -static inline unsigned long allocate_mmu_context(struct mm_struct *mm) -{ - unsigned long *pmc = &mmu_context_cache[smp_processor_id()]; - unsigned long mc = ++(*pmc); - - if (!(mc & MMU_CONTEXT_TLBPID_MASK)) { - /* we exhausted the TLB PIDs of this version on this CPU, so we - * flush this CPU's TLB in its entirety and start new cycle */ - flush_tlb_all(); - - /* fix the TLB version if needed (we avoid version #0 so as to - * distingush MMU_NO_CONTEXT) */ - if (!mc) - *pmc = mc = MMU_CONTEXT_FIRST_VERSION; - } - mm_context(mm) = mc; - return mc; -} - -/* - * get an MMU context if one is needed - */ -static inline unsigned long get_mmu_context(struct mm_struct *mm) -{ - unsigned long mc = MMU_NO_CONTEXT, cache; - - if (mm) { - cache = mmu_context_cache[smp_processor_id()]; - mc = mm_context(mm); - - /* if we have an old version of the context, replace it */ - if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK) - mc = allocate_mmu_context(mm); - } - return mc; -} - -/* - * initialise the context related info for a new mm_struct instance - */ -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - int num_cpus = NR_CPUS, i; - - for (i = 0; i < num_cpus; i++) - mm->context.tlbpid[i] = MMU_NO_CONTEXT; - return 0; -} - -/* - * destroy context related info for an mm_struct that is about to be put to - * rest - */ -#define destroy_context(mm) do { } while (0) - -/* - * after we have set current->mm to a new value, this activates the context for - * the new mm so we see the new mappings. - */ -static inline void activate_context(struct mm_struct *mm, int cpu) -{ - PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK; -} - -/* - * change between virtual memory sets - */ -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - int cpu = smp_processor_id(); - - if (prev != next) { - cpu_ran_vm(cpu, next); - activate_context(next, cpu); - PTBR = (unsigned long) next->pgd; - } else if (!cpu_maybe_ran_vm(cpu, next)) { - activate_context(next, cpu); - } -} - -#define deactivate_mm(tsk, mm) do {} while (0) -#define activate_mm(prev, next) switch_mm((prev), (next), NULL) - -#endif /* _ASM_MMU_CONTEXT_H */ diff --git a/include/asm-mn10300/module.h b/include/asm-mn10300/module.h deleted file mode 100644 index 5d7057d..0000000 --- a/include/asm-mn10300/module.h +++ /dev/null @@ -1,27 +0,0 @@ -/* MN10300 Arch-specific module definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by Mark Salter (msalter@redhat.com) - * Derived from include/asm-i386/module.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_MODULE_H -#define _ASM_MODULE_H - -struct mod_arch_specific { -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -/* - * Include the MN10300 architecture version. - */ -#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " " - -#endif /* _ASM_MODULE_H */ diff --git a/include/asm-mn10300/msgbuf.h b/include/asm-mn10300/msgbuf.h deleted file mode 100644 index 8b60245..0000000 --- a/include/asm-mn10300/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASM_MSGBUF_H -#define _ASM_MSGBUF_H - -/* - * The msqid64_ds structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_MSGBUF_H */ diff --git a/include/asm-mn10300/mutex.h b/include/asm-mn10300/mutex.h deleted file mode 100644 index 84f5490..0000000 --- a/include/asm-mn10300/mutex.h +++ /dev/null @@ -1,16 +0,0 @@ -/* MN10300 Mutex fastpath - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ -#include diff --git a/include/asm-mn10300/nmi.h b/include/asm-mn10300/nmi.h deleted file mode 100644 index f3671cb..0000000 --- a/include/asm-mn10300/nmi.h +++ /dev/null @@ -1,14 +0,0 @@ -/* MN10300 NMI handling - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_NMI_H -#define _ASM_NMI_H - -#endif /* _ASM_NMI_H */ diff --git a/include/asm-mn10300/page.h b/include/asm-mn10300/page.h deleted file mode 100644 index 8288e12..0000000 --- a/include/asm-mn10300/page.h +++ /dev/null @@ -1,128 +0,0 @@ -/* MN10300 Page table definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PAGE_H -#define _ASM_PAGE_H - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 - -#ifndef __ASSEMBLY__ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE - 1)) -#else -#define PAGE_SIZE +(1 << PAGE_SHIFT) /* unary plus marks an - * immediate val not an addr */ -#define PAGE_MASK +(~(PAGE_SIZE - 1)) -#endif - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) -#define copy_page(to, from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) - -#define clear_user_page(addr, vaddr, page) clear_page(addr) -#define copy_user_page(vto, vfrom, vaddr, to) copy_page(vto, vfrom) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define PTE_MASK PAGE_MASK -#define HPAGE_SHIFT 22 - -#ifdef CONFIG_HUGETLB_PAGE -#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE - 1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -#endif - -#define pte_val(x) ((x).pte) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) }) -#define __pgd(x) ((pgd_t) { (x) }) -#define __pgprot(x) ((pgprot_t) { (x) }) - -#include - -#endif /* !__ASSEMBLY__ */ - -/* - * This handles the memory map.. We could make this a config - * option, but too many people screw it up, and too few need - * it. - * - * A __PAGE_OFFSET of 0xC0000000 means that the kernel has - * a virtual address space of one gigabyte, which limits the - * amount of physical memory you can use to about 950MB. - */ - -#ifndef __ASSEMBLY__ - -/* Pure 2^n version of get_order */ -static inline int get_order(unsigned long size) __attribute__((const)); -static inline int get_order(unsigned long size) -{ - int order; - - size = (size - 1) >> (PAGE_SHIFT - 1); - order = -1; - do { - size >>= 1; - order++; - } while (size); - return order; -} - -#endif /* __ASSEMBLY__ */ - -#include - -#define __PAGE_OFFSET (PAGE_OFFSET_RAW) -#define PAGE_OFFSET ((unsigned long) __PAGE_OFFSET) - -/* - * main RAM and kernel working space are coincident at 0x90000000, but to make - * life more interesting, there's also an uncached virtual shadow at 0xb0000000 - * - these mappings are fixed in the MMU - */ -#define __pfn_disp (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT) - -#define __pa(x) ((unsigned long)(x)) -#define __va(x) ((void *)(unsigned long)(x)) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) -#define pfn_to_page(pfn) (mem_map + ((pfn) - __pfn_disp)) -#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + __pfn_disp) - -#define pfn_valid(pfn) \ -({ \ - unsigned long __pfn = (pfn) - __pfn_disp; \ - __pfn < max_mapnr; \ -}) - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -#define VM_DATA_DEFAULT_FLAGS \ - (VM_READ | VM_WRITE | \ - ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PAGE_H */ diff --git a/include/asm-mn10300/page_offset.h b/include/asm-mn10300/page_offset.h deleted file mode 100644 index 8eb5b16..0000000 --- a/include/asm-mn10300/page_offset.h +++ /dev/null @@ -1,11 +0,0 @@ -/* MN10300 Kernel base address - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - */ -#ifndef _ASM_PAGE_OFFSET_H -#define _ASM_PAGE_OFFSET_H - -#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS - -#endif diff --git a/include/asm-mn10300/param.h b/include/asm-mn10300/param.h deleted file mode 100644 index 789b1df..0000000 --- a/include/asm-mn10300/param.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN10300 Kernel parameters - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PARAM_H -#define _ASM_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ /* Internal kernel timer frequency */ -#define USER_HZ 100 /* .. some user interfaces are in - * "ticks" */ -#define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ -#define COMMAND_LINE_SIZE 256 - -#endif /* _ASM_PARAM_H */ diff --git a/include/asm-mn10300/pci.h b/include/asm-mn10300/pci.h deleted file mode 100644 index 0517b45..0000000 --- a/include/asm-mn10300/pci.h +++ /dev/null @@ -1,129 +0,0 @@ -/* MN10300 PCI definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PCI_H -#define _ASM_PCI_H - -#ifdef __KERNEL__ -#include /* for struct page */ - -#if 0 -#define __pcbdebug(FMT, ADDR, ...) \ - printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \ - (u32)(ADDR), ##__VA_ARGS__) - -#define __pcidebug(FMT, BUS, DEVFN, WHERE,...) \ -do { \ - printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n", \ - (BUS)->number, \ - PCI_SLOT(DEVFN), \ - PCI_FUNC(DEVFN), \ - (u32)(WHERE), ##__VA_ARGS__); \ -} while (0) - -#else -#define __pcbdebug(FMT, ADDR, ...) do {} while (0) -#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0) -#endif - -/* Can be used to override the logic in pci_scan_bus for skipping - * already-configured bus numbers - to be used for buggy BIOSes or - * architectures with incomplete PCI setup by the loader */ - -#ifdef CONFIG_PCI -#define pcibios_assign_all_busses() 1 -extern void unit_pci_init(void); -#else -#define pcibios_assign_all_busses() 0 -#endif - -extern unsigned long pci_mem_start; -#define PCIBIOS_MIN_IO 0xBE000004 -#define PCIBIOS_MIN_MEM 0xB8000000 - -void pcibios_set_master(struct pci_dev *dev); -void pcibios_penalize_isa_irq(int irq); - -/* Dynamic DMA mapping stuff. - * i386 has everything mapped statically. - */ - -#include -#include -#include -#include -#include -#include - -struct pci_dev; - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - - -/* This is always fine. */ -#define pci_dac_dma_supported(pci_dev, mask) (0) - -/* Return the index of the PCI controller for device. */ -static inline int pci_controller_num(struct pci_dev *dev) -{ - return 0; -} - -#define HAVE_PCI_MMAP -extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, - int write_combine); - -#endif /* __KERNEL__ */ - -/* implement the pci_ DMA API in terms of the generic device dma_ one */ -#include - -/** - * pcibios_resource_to_bus - convert resource to PCI bus address - * @dev: device which owns this resource - * @region: converted bus-centric region (start,end) - * @res: resource to convert - * - * Convert a resource to a PCI device bus address or bus window. - */ -extern void pcibios_resource_to_bus(struct pci_dev *dev, - struct pci_bus_region *region, - struct resource *res); - -extern void pcibios_bus_to_resource(struct pci_dev *dev, - struct resource *res, - struct pci_bus_region *region); - -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -#define pcibios_scan_all_fns(a, b) 0 - -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - return channel ? 15 : 14; -} - -#endif /* _ASM_PCI_H */ diff --git a/include/asm-mn10300/percpu.h b/include/asm-mn10300/percpu.h deleted file mode 100644 index 06a959d..0000000 --- a/include/asm-mn10300/percpu.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/pgalloc.h b/include/asm-mn10300/pgalloc.h deleted file mode 100644 index ec057e1..0000000 --- a/include/asm-mn10300/pgalloc.h +++ /dev/null @@ -1,56 +0,0 @@ -/* MN10300 Page and page table/directory allocation - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PGALLOC_H -#define _ASM_PGALLOC_H - -#include -#include -#include -#include /* for struct page */ - -struct mm_struct; -struct page; - -/* attach a page table to a PMD entry */ -#define pmd_populate_kernel(mm, pmd, pte) \ - set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE)) - -static inline -void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte) -{ - set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE)); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * Allocate and free page tables. - */ - -extern pgd_t *pgd_alloc(struct mm_struct *); -extern void pgd_free(struct mm_struct *, pgd_t *); - -extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); -extern struct page *pte_alloc_one(struct mm_struct *, unsigned long); - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long) pte); -} - -static inline void pte_free(struct mm_struct *mm, struct page *pte) -{ - __free_page(pte); -} - - -#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte)) - -#endif /* _ASM_PGALLOC_H */ diff --git a/include/asm-mn10300/pgtable.h b/include/asm-mn10300/pgtable.h deleted file mode 100644 index 6dc30fc..0000000 --- a/include/asm-mn10300/pgtable.h +++ /dev/null @@ -1,492 +0,0 @@ -/* MN10300 Page table manipulators and constants - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - * - * - * The Linux memory management assumes a three-level page table setup. On - * the i386, we use that, but "fold" the mid level into the top-level page - * table, so that we physically have the same two-level page table as the - * i386 mmu expects. - * - * This file contains the functions and defines necessary to modify and use - * the i386 page table tree for the purposes of the MN10300 TLB handler - * functions. - */ -#ifndef _ASM_PGTABLE_H -#define _ASM_PGTABLE_H - -#include - -#ifndef __ASSEMBLY__ -#include -#include -#include - -#include - -#include -#include -#include - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) -extern unsigned long empty_zero_page[1024]; -extern spinlock_t pgd_lock; -extern struct page *pgd_list; - -extern void pmd_ctor(void *, struct kmem_cache *, unsigned long); -extern void pgtable_cache_init(void); -extern void paging_init(void); - -#endif /* !__ASSEMBLY__ */ - -/* - * The Linux mn10300 paging architecture only implements both the traditional - * 2-level page tables - */ -#define PGDIR_SHIFT 22 -#define PTRS_PER_PGD 1024 -#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */ -#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */ -#define PTRS_PER_PTE 1024 - -#define PGD_SIZE PAGE_SIZE -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE - 1)) - -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS) - -#define TWOLEVEL_PGDIR_SHIFT 22 -#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) -#define BOOT_KERNEL_PGD_PTRS (1024 - BOOT_USER_PGD_PTRS) - -#ifndef __ASSEMBLY__ -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -#endif - -/* - * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM - * area has to be in the lower half of the virtual address range (the upper - * half is not translated through the TLB). - * - * So in this case, the vmalloc area goes at the bottom of the address map - * (leaving a hole at the very bottom to catch addressing errors), and - * userspace starts immediately above. - * - * The vmalloc() routines also leaves a hole of 4kB between each vmalloced - * area to catch addressing errors. - */ -#define VMALLOC_OFFSET (8 * 1024 * 1024) -#define VMALLOC_START (0x70000000) -#define VMALLOC_END (0x7C000000) - -#ifndef __ASSEMBLY__ -extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; -#endif - -/* IPTEL/DPTEL bit assignments */ -#define _PAGE_BIT_VALID xPTEL_V_BIT -#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_CACHE xPTEL_C_BIT -#define _PAGE_BIT_PRESENT xPTEL_PV_BIT -#define _PAGE_BIT_DIRTY xPTEL_D_BIT -#define _PAGE_BIT_GLOBAL xPTEL_G_BIT - -#define _PAGE_VALID xPTEL_V -#define _PAGE_ACCESSED xPTEL_UNUSED1 -#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */ -#define _PAGE_CACHE xPTEL_C -#define _PAGE_PRESENT xPTEL_PV -#define _PAGE_DIRTY xPTEL_D -#define _PAGE_PROT xPTEL_PR -#define _PAGE_PROT_RKNU xPTEL_PR_ROK -#define _PAGE_PROT_WKNU xPTEL_PR_RWK -#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU -#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU -#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU -#define _PAGE_GLOBAL xPTEL_G -#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */ - -#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */ - -#define __PAGE_PROT_UWAUX 0x040 -#define __PAGE_PROT_USER 0x080 -#define __PAGE_PROT_WRITE 0x100 - -#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID) -#define _PAGE_PROTNONE 0x000 /* If not present */ - -#ifndef __ASSEMBLY__ - -#define VMALLOC_VMADDR(x) ((unsigned long)(x)) - -#define _PAGE_TABLE (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -#define __PAGE_NONE (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE) -#define __PAGE_SHARED (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE) -#define __PAGE_COPY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) -#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) - -#define PAGE_NONE __pgprot(__PAGE_NONE | _PAGE_NX) -#define PAGE_SHARED_NOEXEC __pgprot(__PAGE_SHARED | _PAGE_NX) -#define PAGE_COPY_NOEXEC __pgprot(__PAGE_COPY | _PAGE_NX) -#define PAGE_READONLY_NOEXEC __pgprot(__PAGE_READONLY | _PAGE_NX) -#define PAGE_SHARED_EXEC __pgprot(__PAGE_SHARED) -#define PAGE_COPY_EXEC __pgprot(__PAGE_COPY) -#define PAGE_READONLY_EXEC __pgprot(__PAGE_READONLY) -#define PAGE_COPY PAGE_COPY_NOEXEC -#define PAGE_READONLY PAGE_READONLY_NOEXEC -#define PAGE_SHARED PAGE_SHARED_EXEC - -#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL) - -#define __PAGE_KERNEL (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX) -#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX) -#define __PAGE_KERNEL_EXEC (__PAGE_KERNEL & ~_PAGE_NX) -#define __PAGE_KERNEL_RO (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX) -#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE) -#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE) - -#define PAGE_KERNEL __pgprot(__PAGE_KERNEL) -#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO) -#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC) -#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE) -#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE) -#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC) - -/* - * Whilst the MN10300 can do page protection for execute (given separate data - * and insn TLBs), we are not supporting it at the moment. Write permission, - * however, always implies read permission (but not execute permission). - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY_NOEXEC -#define __P010 PAGE_COPY_NOEXEC -#define __P011 PAGE_COPY_NOEXEC -#define __P100 PAGE_READONLY_EXEC -#define __P101 PAGE_READONLY_EXEC -#define __P110 PAGE_COPY_EXEC -#define __P111 PAGE_COPY_EXEC - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY_NOEXEC -#define __S010 PAGE_SHARED_NOEXEC -#define __S011 PAGE_SHARED_NOEXEC -#define __S100 PAGE_READONLY_EXEC -#define __S101 PAGE_READONLY_EXEC -#define __S110 PAGE_SHARED_EXEC -#define __S111 PAGE_SHARED_EXEC - -/* - * Define this to warn about kernel memory accesses that are - * done without a 'verify_area(VERIFY_WRITE,..)' - */ -#undef TEST_VERIFY_AREA - -#define pte_present(x) (pte_val(x) & _PAGE_VALID) -#define pte_clear(mm, addr, xp) \ -do { \ - set_pte_at((mm), (addr), (xp), __pte(0)); \ -} while (0) - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (!pmd_none(x)) -#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) -#define pmd_bad(x) 0 - - -#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) - -#ifndef __ASSEMBLY__ - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_user(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } -static inline int pte_read(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; } -static inline int pte_special(pte_t pte){ return 0; } - -/* - * The following only works if pte_present() is not true. - */ -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } - -static inline pte_t pte_rdprotect(pte_t pte) -{ - pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte; -} -static inline pte_t pte_exprotect(pte_t pte) -{ - pte_val(pte) |= _PAGE_NX; return pte; -} - -static inline pte_t pte_wrprotect(pte_t pte) -{ - pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte; -} - -static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } -static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) &= ~_PAGE_NX; return pte; } - -static inline pte_t pte_mkread(pte_t pte) -{ - pte_val(pte) |= __PAGE_PROT_USER; - if (pte_write(pte)) - pte_val(pte) |= __PAGE_PROT_UWAUX; - return pte; -} -static inline pte_t pte_mkwrite(pte_t pte) -{ - pte_val(pte) |= __PAGE_PROT_WRITE; - if (pte_val(pte) & __PAGE_PROT_USER) - pte_val(pte) |= __PAGE_PROT_UWAUX; - return pte; -} - -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -#define pte_ERROR(e) \ - printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ - __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ - __FILE__, __LINE__, pgd_val(e)) - -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -#define pgd_clear(xp) do { } while (0) - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) (*(pteptr) = pteval) -#define set_pte_at(mm, addr, ptep, pteval) set_pte((ptep), (pteval)) -#define set_pte_atomic(pteptr, pteval) set_pte((pteptr), (pteval)) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -#define ptep_get_and_clear(mm, addr, ptep) \ - __pte(xchg(&(ptep)->pte, 0)) -#define pte_same(a, b) (pte_val(a) == pte_val(b)) -#define pte_page(x) pfn_to_page(pte_pfn(x)) -#define pte_none(x) (!pte_val(x)) -#define pte_pfn(x) ((unsigned long) (pte_val(x) >> PAGE_SHIFT)) -#define __pfn_addr(pfn) ((pfn) << PAGE_SHIFT) -#define pfn_pte(pfn, prot) __pte(__pfn_addr(pfn) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(__pfn_addr(pfn) | pgprot_val(prot)) - -/* - * All present user pages are user-executable: - */ -static inline int pte_exec(pte_t pte) -{ - return pte_user(pte); -} - -/* - * All present pages are kernel-executable: - */ -static inline int pte_exec_kernel(pte_t pte) -{ - return 1; -} - -/* - * Bits 0 and 1 are taken, split up the 29 bits of offset - * into this range: - */ -#define PTE_FILE_MAX_BITS 29 - -#define pte_to_pgoff(pte) (pte_val(pte) >> 2) -#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) - -/* Encode and de-code a swap entry */ -#define __swp_type(x) (((x).val >> 2) & 0x3f) -#define __swp_offset(x) ((x).val >> 8) -#define __swp_entry(type, offset) \ - ((swp_entry_t) { ((type) << 2) | ((offset) << 8) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) __pte((x).val) - -static inline -int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, - pte_t *ptep) -{ - if (!pte_dirty(*ptep)) - return 0; - return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte); -} - -static inline -int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, - pte_t *ptep) -{ - if (!pte_young(*ptep)) - return 0; - return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte); -} - -static inline -void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); -} - -static inline void ptep_mkdirty(pte_t *ptep) -{ - set_bit(_PAGE_BIT_DIRTY, &ptep->pte); -} - -/* - * Macro to mark a page protection value as "uncacheable". On processors which - * do not support it, this is a no-op. - */ -#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE) - - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ - -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) -#define mk_pte_huge(entry) \ - ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) &= _PAGE_CHG_MASK; - pte_val(pte) |= pgprot_val(newprot); - return pte; -} - -#define page_pte(page) page_pte_prot((page), __pgprot(0)) - -#define pmd_page_kernel(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) - -#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) - -#define pmd_large(pmd) \ - ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \ - (_PAGE_PSE | _PAGE_PRESENT)) - -/* - * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD] - * - * this macro returns the index of the entry in the pgd page which would - * control the given virtual address - */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) - -/* - * pgd_offset() returns a (pgd_t *) - * pgd_index() is used get the offset into the pgd page's array of pgd_t's; - */ -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* - * a shortcut which implies the use of the kernel's pgd, instead - * of a process's - */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD] - * - * this macro returns the index of the entry in the pmd page which would - * control the given virtual address - */ -#define pmd_index(address) \ - (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) - -/* - * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] - * - * this macro returns the index of the entry in the pte page which would - * control the given virtual address - */ -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address)) - -/* - * Make a given kernel text page executable/non-executable. - * Returns the previous executability setting of that page (which - * is used to restore the previous state). Used by the SMP bootup code. - * NOTE: this is an __init function for security reasons. - */ -static inline int set_kernel_exec(unsigned long vaddr, int enable) -{ - return 0; -} - -#define pte_offset_map(dir, address) \ - ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address)) -#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) -#define pte_unmap(pte) do {} while (0) -#define pte_unmap_nested(pte) do {} while (0) - -/* - * The MN10300 has external MMU info in the form of a TLB: this is adapted from - * the kernel page tables containing the necessary information by tlb-mn10300.S - */ -extern void update_mmu_cache(struct vm_area_struct *vma, - unsigned long address, pte_t pte); - -#endif /* !__ASSEMBLY__ */ - -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range((vma), (vaddr), (pfn), (size), (prot)) - -#define MK_IOSPACE_PFN(space, pfn) (pfn) -#define GET_IOSPACE(pfn) 0 -#define GET_PFN(pfn) (pfn) - -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define __HAVE_ARCH_PTEP_MKDIRTY -#define __HAVE_ARCH_PTE_SAME -#include - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_PGTABLE_H */ diff --git a/include/asm-mn10300/pio-regs.h b/include/asm-mn10300/pio-regs.h deleted file mode 100644 index 96bc818..0000000 --- a/include/asm-mn10300/pio-regs.h +++ /dev/null @@ -1,233 +0,0 @@ -/* MN10300 On-board I/O port module registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PIO_REGS_H -#define _ASM_PIO_REGS_H - -#include -#include - -#ifdef __KERNEL__ - -/* I/O port 0 */ -#define P0MD __SYSREG(0xdb000000, u16) /* mode reg */ -#define P0MD_0 0x0003 /* mask */ -#define P0MD_0_IN 0x0000 /* input mode */ -#define P0MD_0_OUT 0x0001 /* output mode */ -#define P0MD_0_TM0IO 0x0002 /* timer 0 I/O mode */ -#define P0MD_0_EYECLK 0x0003 /* test signal output (clock) */ -#define P0MD_1 0x000c -#define P0MD_1_IN 0x0000 -#define P0MD_1_OUT 0x0004 -#define P0MD_1_TM1IO 0x0008 /* timer 1 I/O mode */ -#define P0MD_1_EYED 0x000c /* test signal output (data) */ -#define P0MD_2 0x0030 -#define P0MD_2_IN 0x0000 -#define P0MD_2_OUT 0x0010 -#define P0MD_2_TM2IO 0x0020 /* timer 2 I/O mode */ -#define P0MD_3 0x00c0 -#define P0MD_3_IN 0x0000 -#define P0MD_3_OUT 0x0040 -#define P0MD_3_TM3IO 0x0080 /* timer 3 I/O mode */ -#define P0MD_4 0x0300 -#define P0MD_4_IN 0x0000 -#define P0MD_4_OUT 0x0100 -#define P0MD_4_TM4IO 0x0200 /* timer 4 I/O mode */ -#define P0MD_4_XCTS 0x0300 /* XCTS input for serial port 2 */ -#define P0MD_5 0x0c00 -#define P0MD_5_IN 0x0000 -#define P0MD_5_OUT 0x0400 -#define P0MD_5_TM5IO 0x0800 /* timer 5 I/O mode */ -#define P0MD_6 0x3000 -#define P0MD_6_IN 0x0000 -#define P0MD_6_OUT 0x1000 -#define P0MD_6_TM6IOA 0x2000 /* timer 6 I/O mode A */ -#define P0MD_7 0xc000 -#define P0MD_7_IN 0x0000 -#define P0MD_7_OUT 0x4000 -#define P0MD_7_TM6IOB 0x8000 /* timer 6 I/O mode B */ - -#define P0IN __SYSREG(0xdb000004, u8) /* in reg */ -#define P0OUT __SYSREG(0xdb000008, u8) /* out reg */ - -#define P0TMIO __SYSREG(0xdb00000c, u8) /* TM pin I/O control reg */ -#define P0TMIO_TM0_IN 0x00 -#define P0TMIO_TM0_OUT 0x01 -#define P0TMIO_TM1_IN 0x00 -#define P0TMIO_TM1_OUT 0x02 -#define P0TMIO_TM2_IN 0x00 -#define P0TMIO_TM2_OUT 0x04 -#define P0TMIO_TM3_IN 0x00 -#define P0TMIO_TM3_OUT 0x08 -#define P0TMIO_TM4_IN 0x00 -#define P0TMIO_TM4_OUT 0x10 -#define P0TMIO_TM5_IN 0x00 -#define P0TMIO_TM5_OUT 0x20 -#define P0TMIO_TM6A_IN 0x00 -#define P0TMIO_TM6A_OUT 0x40 -#define P0TMIO_TM6B_IN 0x00 -#define P0TMIO_TM6B_OUT 0x80 - -/* I/O port 1 */ -#define P1MD __SYSREG(0xdb000100, u16) /* mode reg */ -#define P1MD_0 0x0003 /* mask */ -#define P1MD_0_IN 0x0000 /* input mode */ -#define P1MD_0_OUT 0x0001 /* output mode */ -#define P1MD_0_TM7IO 0x0002 /* timer 7 I/O mode */ -#define P1MD_0_ADTRG 0x0003 /* A/D converter trigger mode */ -#define P1MD_1 0x000c -#define P1MD_1_IN 0x0000 -#define P1MD_1_OUT 0x0004 -#define P1MD_1_TM8IO 0x0008 /* timer 8 I/O mode */ -#define P1MD_1_XDMR0 0x000c /* DMA request input 0 mode */ -#define P1MD_2 0x0030 -#define P1MD_2_IN 0x0000 -#define P1MD_2_OUT 0x0010 -#define P1MD_2_TM9IO 0x0020 /* timer 9 I/O mode */ -#define P1MD_2_XDMR1 0x0030 /* DMA request input 1 mode */ -#define P1MD_3 0x00c0 -#define P1MD_3_IN 0x0000 -#define P1MD_3_OUT 0x0040 -#define P1MD_3_TM10IO 0x0080 /* timer 10 I/O mode */ -#define P1MD_3_FRQS0 0x00c0 /* CPU clock multiplier setting input 0 mode */ -#define P1MD_4 0x0300 -#define P1MD_4_IN 0x0000 -#define P1MD_4_OUT 0x0100 -#define P1MD_4_TM11IO 0x0200 /* timer 11 I/O mode */ -#define P1MD_4_FRQS1 0x0300 /* CPU clock multiplier setting input 1 mode */ - -#define P1IN __SYSREG(0xdb000104, u8) /* in reg */ -#define P1OUT __SYSREG(0xdb000108, u8) /* out reg */ -#define P1TMIO __SYSREG(0xdb00010c, u8) /* TM pin I/O control reg */ -#define P1TMIO_TM11_IN 0x00 -#define P1TMIO_TM11_OUT 0x01 -#define P1TMIO_TM10_IN 0x00 -#define P1TMIO_TM10_OUT 0x02 -#define P1TMIO_TM9_IN 0x00 -#define P1TMIO_TM9_OUT 0x04 -#define P1TMIO_TM8_IN 0x00 -#define P1TMIO_TM8_OUT 0x08 -#define P1TMIO_TM7_IN 0x00 -#define P1TMIO_TM7_OUT 0x10 - -/* I/O port 2 */ -#define P2MD __SYSREG(0xdb000200, u16) /* mode reg */ -#define P2MD_0 0x0003 /* mask */ -#define P2MD_0_IN 0x0000 /* input mode */ -#define P2MD_0_OUT 0x0001 /* output mode */ -#define P2MD_0_BOOTBW 0x0003 /* boot bus width selector mode */ -#define P2MD_1 0x000c -#define P2MD_1_IN 0x0000 -#define P2MD_1_OUT 0x0004 -#define P2MD_1_BOOTSEL 0x000c /* boot device selector mode */ -#define P2MD_2 0x0030 -#define P2MD_2_IN 0x0000 -#define P2MD_2_OUT 0x0010 -#define P2MD_3 0x00c0 -#define P2MD_3_IN 0x0000 -#define P2MD_3_OUT 0x0040 -#define P2MD_3_CKIO 0x00c0 /* mode */ -#define P2MD_4 0x0300 -#define P2MD_4_IN 0x0000 -#define P2MD_4_OUT 0x0100 -#define P2MD_4_CMOD 0x0300 /* mode */ - -#define P2IN __SYSREG(0xdb000204, u8) /* in reg */ -#define P2OUT __SYSREG(0xdb000208, u8) /* out reg */ -#define P2TMIO __SYSREG(0xdb00020c, u8) /* TM pin I/O control reg */ - -/* I/O port 3 */ -#define P3MD __SYSREG(0xdb000300, u16) /* mode reg */ -#define P3MD_0 0x0003 /* mask */ -#define P3MD_0_IN 0x0000 /* input mode */ -#define P3MD_0_OUT 0x0001 /* output mode */ -#define P3MD_0_AFRXD 0x0002 /* AFR interface mode */ -#define P3MD_1 0x000c -#define P3MD_1_IN 0x0000 -#define P3MD_1_OUT 0x0004 -#define P3MD_1_AFTXD 0x0008 /* AFR interface mode */ -#define P3MD_2 0x0030 -#define P3MD_2_IN 0x0000 -#define P3MD_2_OUT 0x0010 -#define P3MD_2_AFSCLK 0x0020 /* AFR interface mode */ -#define P3MD_3 0x00c0 -#define P3MD_3_IN 0x0000 -#define P3MD_3_OUT 0x0040 -#define P3MD_3_AFFS 0x0080 /* AFR interface mode */ -#define P3MD_4 0x0300 -#define P3MD_4_IN 0x0000 -#define P3MD_4_OUT 0x0100 -#define P3MD_4_AFEHC 0x0200 /* AFR interface mode */ - -#define P3IN __SYSREG(0xdb000304, u8) /* in reg */ -#define P3OUT __SYSREG(0xdb000308, u8) /* out reg */ - -/* I/O port 4 */ -#define P4MD __SYSREG(0xdb000400, u16) /* mode reg */ -#define P4MD_0 0x0003 /* mask */ -#define P4MD_0_IN 0x0000 /* input mode */ -#define P4MD_0_OUT 0x0001 /* output mode */ -#define P4MD_0_SCL0 0x0002 /* I2C/serial mode */ -#define P4MD_1 0x000c -#define P4MD_1_IN 0x0000 -#define P4MD_1_OUT 0x0004 -#define P4MD_1_SDA0 0x0008 -#define P4MD_2 0x0030 -#define P4MD_2_IN 0x0000 -#define P4MD_2_OUT 0x0010 -#define P4MD_2_SCL1 0x0020 -#define P4MD_3 0x00c0 -#define P4MD_3_IN 0x0000 -#define P4MD_3_OUT 0x0040 -#define P4MD_3_SDA1 0x0080 -#define P4MD_4 0x0300 -#define P4MD_4_IN 0x0000 -#define P4MD_4_OUT 0x0100 -#define P4MD_4_SBO0 0x0200 -#define P4MD_5 0x0c00 -#define P4MD_5_IN 0x0000 -#define P4MD_5_OUT 0x0400 -#define P4MD_5_SBO1 0x0800 -#define P4MD_6 0x3000 -#define P4MD_6_IN 0x0000 -#define P4MD_6_OUT 0x1000 -#define P4MD_6_SBT0 0x2000 -#define P4MD_7 0xc000 -#define P4MD_7_IN 0x0000 -#define P4MD_7_OUT 0x4000 -#define P4MD_7_SBT1 0x8000 - -#define P4IN __SYSREG(0xdb000404, u8) /* in reg */ -#define P4OUT __SYSREG(0xdb000408, u8) /* out reg */ - -/* I/O port 5 */ -#define P5MD __SYSREG(0xdb000500, u16) /* mode reg */ -#define P5MD_0 0x0003 /* mask */ -#define P5MD_0_IN 0x0000 /* input mode */ -#define P5MD_0_OUT 0x0001 /* output mode */ -#define P5MD_0_IRTXD 0x0002 /* IrDA mode */ -#define P5MD_0_SOUT 0x0004 /* serial mode */ -#define P5MD_1 0x000c -#define P5MD_1_IN 0x0000 -#define P5MD_1_OUT 0x0004 -#define P5MD_1_IRRXDS 0x0008 /* IrDA mode */ -#define P5MD_1_SIN 0x000c /* serial mode */ -#define P5MD_2 0x0030 -#define P5MD_2_IN 0x0000 -#define P5MD_2_OUT 0x0010 -#define P5MD_2_IRRXDF 0x0020 /* IrDA mode */ - -#define P5IN __SYSREG(0xdb000504, u8) /* in reg */ -#define P5OUT __SYSREG(0xdb000508, u8) /* out reg */ - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PIO_REGS_H */ diff --git a/include/asm-mn10300/poll.h b/include/asm-mn10300/poll.h deleted file mode 100644 index c98509d..0000000 --- a/include/asm-mn10300/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/posix_types.h b/include/asm-mn10300/posix_types.h deleted file mode 100644 index 077567c..0000000 --- a/include/asm-mn10300/posix_types.h +++ /dev/null @@ -1,132 +0,0 @@ -/* MN10300 POSIX types - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_POSIX_TYPES_H -#define _ASM_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static inline void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ - -#endif /* _ASM_POSIX_TYPES_H */ diff --git a/include/asm-mn10300/proc-mn103e010/cache.h b/include/asm-mn10300/proc-mn103e010/cache.h deleted file mode 100644 index bdc1f9a..0000000 --- a/include/asm-mn10300/proc-mn103e010/cache.h +++ /dev/null @@ -1,33 +0,0 @@ -/* MN103E010 Cache specification - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CACHE_H -#define _ASM_PROC_CACHE_H - -/* L1 cache */ - -#define L1_CACHE_NWAYS 4 /* number of ways in caches */ -#define L1_CACHE_NENTRIES 256 /* number of entries in each way */ -#define L1_CACHE_BYTES 16 /* bytes per entry */ -#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */ -#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */ - -#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ -#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ -#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */ -#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ - -/* - * specification of the interval between interrupt checking intervals whilst - * managing the cache with the interrupts disabled - */ -#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 - -#endif /* _ASM_PROC_CACHE_H */ diff --git a/include/asm-mn10300/proc-mn103e010/clock.h b/include/asm-mn10300/proc-mn103e010/clock.h deleted file mode 100644 index caf9983..0000000 --- a/include/asm-mn10300/proc-mn103e010/clock.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN103E010-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CLOCK_H -#define _ASM_PROC_CLOCK_H - -#include - -#define MN10300_WDCLK MN10300_IOCLK - -#endif /* _ASM_PROC_CLOCK_H */ diff --git a/include/asm-mn10300/proc-mn103e010/irq.h b/include/asm-mn10300/proc-mn103e010/irq.h deleted file mode 100644 index aa6ee8f..0000000 --- a/include/asm-mn10300/proc-mn103e010/irq.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN103E010 On-board interrupt controller numbers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_IRQ_H -#define _ASM_PROC_IRQ_H - -#ifdef __KERNEL__ - -#define GxICR_NUM_IRQS 42 - -#define GxICR_NUM_XIRQS 8 - -#define XIRQ0 34 -#define XIRQ1 35 -#define XIRQ2 36 -#define XIRQ3 37 -#define XIRQ4 38 -#define XIRQ5 39 -#define XIRQ6 40 -#define XIRQ7 41 - -#define XIRQ2IRQ(num) (XIRQ0 + num) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PROC_IRQ_H */ diff --git a/include/asm-mn10300/proc-mn103e010/proc.h b/include/asm-mn10300/proc-mn103e010/proc.h deleted file mode 100644 index 22a2b93..0000000 --- a/include/asm-mn10300/proc-mn103e010/proc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN103E010 Processor description - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_PROC_H -#define _ASM_PROC_PROC_H - -#define PROCESSOR_VENDOR_NAME "Matsushita" -#define PROCESSOR_MODEL_NAME "mn103e010" - -#endif /* _ASM_PROC_PROC_H */ diff --git a/include/asm-mn10300/processor.h b/include/asm-mn10300/processor.h deleted file mode 100644 index 7323927..0000000 --- a/include/asm-mn10300/processor.h +++ /dev/null @@ -1,186 +0,0 @@ -/* MN10300 Processor specifics - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROCESSOR_H -#define _ASM_PROCESSOR_H - -#include -#include -#include -#include - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() \ -({ \ - void *__pc; \ - asm("mov pc,%0" : "=a"(__pc)); \ - __pc; \ -}) - -extern void show_registers(struct pt_regs *regs); - -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * Members of this structure are referenced in head.S, so think twice - * before touching them. [mj] - */ - -struct mn10300_cpuinfo { - int type; - unsigned long loops_per_sec; - char hard_math; - unsigned long *pgd_quick; - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; -}; - -extern struct mn10300_cpuinfo boot_cpu_data; - -#define cpu_data &boot_cpu_data -#define current_cpu_data boot_cpu_data - -extern void identify_cpu(struct mn10300_cpuinfo *); -extern void print_cpu_info(struct mn10300_cpuinfo *); -extern void dodgy_tsc(void); -#define cpu_relax() barrier() - -/* - * User space process size: 1.75GB (default). - */ -#define TASK_SIZE 0x70000000 - -/* - * Where to put the userspace stack by default - */ -#define STACK_TOP 0x70000000 -#define STACK_TOP_MAX STACK_TOP - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE 0x30000000 - -typedef struct { - unsigned long seg; -} mm_segment_t; - -struct fpu_state_struct { - unsigned long fs[32]; /* fpu registers */ - unsigned long fpcr; /* fpu control register */ -}; - -struct thread_struct { - struct pt_regs *uregs; /* userspace register frame */ - unsigned long pc; /* kernel PC */ - unsigned long sp; /* kernel SP */ - unsigned long a3; /* kernel FP */ - unsigned long wchan; - unsigned long usp; - struct pt_regs *__frame; - unsigned long fpu_flags; -#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ - struct fpu_state_struct fpu_state; -}; - -#define INIT_THREAD \ -{ \ - .uregs = init_uregs, \ - .pc = 0, \ - .sp = 0, \ - .a3 = 0, \ - .wchan = 0, \ - .__frame = NULL, \ -} - -#define INIT_MMAP \ -{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \ - NULL, NULL } - -/* - * do necessary setup to start up a newly executed thread - * - need to discard the frame stacked by the kernel thread invoking the execve - * syscall (see RESTORE_ALL macro) - */ -#define start_thread(regs, new_pc, new_sp) do { \ - set_fs(USER_DS); \ - __frame = current->thread.uregs; \ - __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \ - __frame->pc = new_pc; \ - __frame->sp = new_sp; \ -} while (0) - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -extern void prepare_to_copy(struct task_struct *tsk); - -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -/* - * Return saved PC of a blocked thread. - */ -extern unsigned long thread_saved_pc(struct task_struct *tsk); - -unsigned long get_wchan(struct task_struct *p); - -#define task_pt_regs(task) \ -({ \ - struct pt_regs *__regs__; \ - __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \ - __regs__ - 1; \ -}) - -#define KSTK_EIP(task) (task_pt_regs(task)->pc) -#define KSTK_ESP(task) (task_pt_regs(task)->sp) - -#define KSTK_TOP(info) \ -({ \ - (unsigned long)(info) + THREAD_SIZE; \ -}) - -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW - -static inline void prefetch(const void *x) -{ -#ifndef CONFIG_MN10300_CACHE_DISABLED -#ifdef CONFIG_MN10300_PROC_MN103E010 - asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); -#else - asm volatile ("dcpf (%0)" : : "r"(x)); -#endif -#endif -} - -static inline void prefetchw(const void *x) -{ -#ifndef CONFIG_MN10300_CACHE_DISABLED -#ifdef CONFIG_MN10300_PROC_MN103E010 - asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); -#else - asm volatile ("dcpf (%0)" : : "r"(x)); -#endif -#endif -} - -#endif /* _ASM_PROCESSOR_H */ diff --git a/include/asm-mn10300/ptrace.h b/include/asm-mn10300/ptrace.h deleted file mode 100644 index 7b06cc6..0000000 --- a/include/asm-mn10300/ptrace.h +++ /dev/null @@ -1,103 +0,0 @@ -/* MN10300 Exception frame layout and ptrace constants - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PTRACE_H -#define _ASM_PTRACE_H - -#define PT_A3 0 -#define PT_A2 1 -#define PT_D3 2 -#define PT_D2 3 -#define PT_MCVF 4 -#define PT_MCRL 5 -#define PT_MCRH 6 -#define PT_MDRQ 7 -#define PT_E1 8 -#define PT_E0 9 -#define PT_E7 10 -#define PT_E6 11 -#define PT_E5 12 -#define PT_E4 13 -#define PT_E3 14 -#define PT_E2 15 -#define PT_SP 16 -#define PT_LAR 17 -#define PT_LIR 18 -#define PT_MDR 19 -#define PT_A1 20 -#define PT_A0 21 -#define PT_D1 22 -#define PT_D0 23 -#define PT_ORIG_D0 24 -#define PT_EPSW 25 -#define PT_PC 26 -#define NR_PTREGS 27 - -#ifndef __ASSEMBLY__ -/* - * This defines the way registers are stored in the event of an exception - * - the strange order is due to the MOVM instruction - */ -struct pt_regs { - unsigned long a3; /* syscall arg 3 */ - unsigned long a2; /* syscall arg 4 */ - unsigned long d3; /* syscall arg 5 */ - unsigned long d2; /* syscall arg 6 */ - unsigned long mcvf; - unsigned long mcrl; - unsigned long mcrh; - unsigned long mdrq; - unsigned long e1; - unsigned long e0; - unsigned long e7; - unsigned long e6; - unsigned long e5; - unsigned long e4; - unsigned long e3; - unsigned long e2; - unsigned long sp; - unsigned long lar; - unsigned long lir; - unsigned long mdr; - unsigned long a1; - unsigned long a0; /* syscall arg 1 */ - unsigned long d1; /* syscall arg 2 */ - unsigned long d0; /* syscall ret */ - struct pt_regs *next; /* next frame pointer */ - unsigned long orig_d0; /* syscall number */ - unsigned long epsw; - unsigned long pc; -}; -#endif - -extern struct pt_regs *__frame; /* current frame pointer */ - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 - -#if defined(__KERNEL__) - -#if !defined(__ASSEMBLY__) -#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) -#define instruction_pointer(regs) ((regs)->pc) -extern void show_regs(struct pt_regs *); -#endif /* !__ASSEMBLY */ - -#define profile_pc(regs) ((regs)->pc) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PTRACE_H */ diff --git a/include/asm-mn10300/reset-regs.h b/include/asm-mn10300/reset-regs.h deleted file mode 100644 index 174523d..0000000 --- a/include/asm-mn10300/reset-regs.h +++ /dev/null @@ -1,64 +0,0 @@ -/* MN10300 Reset controller and watchdog timer definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_RESET_REGS_H -#define _ASM_RESET_REGS_H - -#include -#include - -#ifdef __KERNEL__ - -#ifdef CONFIG_MN10300_WD_TIMER -#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */ -#endif - -/* - * watchdog timer registers - */ -#define WDBC __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */ - -#define WDCTR __SYSREG(0xc0001002, u8) /* watchdog timer control reg */ -#define WDCTR_WDCK 0x07 /* clock source selection */ -#define WDCTR_WDCK_256th 0x00 /* - OSCI/256 */ -#define WDCTR_WDCK_1024th 0x01 /* - OSCI/1024 */ -#define WDCTR_WDCK_2048th 0x02 /* - OSCI/2048 */ -#define WDCTR_WDCK_16384th 0x03 /* - OSCI/16384 */ -#define WDCTR_WDCK_65536th 0x04 /* - OSCI/65536 */ -#define WDCTR_WDRST 0x40 /* binary counter reset */ -#define WDCTR_WDCNE 0x80 /* watchdog timer enable */ - -#define RSTCTR __SYSREG(0xc0001004, u8) /* reset control reg */ -#define RSTCTR_CHIPRST 0x01 /* chip reset */ -#define RSTCTR_DBFRST 0x02 /* double fault reset flag */ -#define RSTCTR_WDTRST 0x04 /* watchdog timer reset flag */ -#define RSTCTR_WDREN 0x08 /* watchdog timer reset enable */ - -#ifndef __ASSEMBLY__ - -static inline void mn10300_proc_hard_reset(void) -{ - RSTCTR &= ~RSTCTR_CHIPRST; - RSTCTR |= RSTCTR_CHIPRST; -} - -extern unsigned int watchdog_alert_counter; - -extern void watchdog_go(void); -extern asmlinkage void watchdog_handler(void); -extern asmlinkage -void watchdog_interrupt(struct pt_regs *, enum exception_code); - -#endif - -#endif /* __KERNEL__ */ - -#endif /* _ASM_RESET_REGS_H */ diff --git a/include/asm-mn10300/resource.h b/include/asm-mn10300/resource.h deleted file mode 100644 index 04bc4db..0000000 --- a/include/asm-mn10300/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/rtc-regs.h b/include/asm-mn10300/rtc-regs.h deleted file mode 100644 index c42deef..0000000 --- a/include/asm-mn10300/rtc-regs.h +++ /dev/null @@ -1,86 +0,0 @@ -/* MN10300 on-chip Real-Time Clock registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_RTC_REGS_H -#define _ASM_RTC_REGS_H - -#include - -#ifdef __KERNEL__ - -#define RTSCR __SYSREG(0xd8600000, u8) /* RTC seconds count reg */ -#define RTSAR __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */ -#define RTMCR __SYSREG(0xd8600002, u8) /* RTC minutes count reg */ -#define RTMAR __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */ -#define RTHCR __SYSREG(0xd8600004, u8) /* RTC hours count reg */ -#define RTHAR __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */ -#define RTDWCR __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */ -#define RTDMCR __SYSREG(0xd8600007, u8) /* RTC days count reg */ -#define RTMTCR __SYSREG(0xd8600008, u8) /* RTC months count reg */ -#define RTYCR __SYSREG(0xd8600009, u8) /* RTC years count reg */ - -#define RTCRA __SYSREG(0xd860000a, u8)/* RTC control reg A */ -#define RTCRA_RS 0x0f /* periodic timer interrupt cycle setting */ -#define RTCRA_RS_NONE 0x00 /* - off */ -#define RTCRA_RS_3_90625ms 0x01 /* - 3.90625ms (1/256s) */ -#define RTCRA_RS_7_8125ms 0x02 /* - 7.8125ms (1/128s) */ -#define RTCRA_RS_122_070us 0x03 /* - 122.070us (1/8192s) */ -#define RTCRA_RS_244_141us 0x04 /* - 244.141us (1/4096s) */ -#define RTCRA_RS_488_281us 0x05 /* - 488.281us (1/2048s) */ -#define RTCRA_RS_976_5625us 0x06 /* - 976.5625us (1/1024s) */ -#define RTCRA_RS_1_953125ms 0x07 /* - 1.953125ms (1/512s) */ -#define RTCRA_RS_3_90624ms 0x08 /* - 3.90624ms (1/256s) */ -#define RTCRA_RS_7_8125ms_b 0x09 /* - 7.8125ms (1/128s) */ -#define RTCRA_RS_15_625ms 0x0a /* - 15.625ms (1/64s) */ -#define RTCRA_RS_31_25ms 0x0b /* - 31.25ms (1/32s) */ -#define RTCRA_RS_62_5ms 0x0c /* - 62.5ms (1/16s) */ -#define RTCRA_RS_125ms 0x0d /* - 125ms (1/8s) */ -#define RTCRA_RS_250ms 0x0e /* - 250ms (1/4s) */ -#define RTCRA_RS_500ms 0x0f /* - 500ms (1/2s) */ -#define RTCRA_DVR 0x40 /* divider reset */ -#define RTCRA_UIP 0x80 /* clock update flag */ - -#define RTCRB __SYSREG(0xd860000b, u8) /* RTC control reg B */ -#define RTCRB_DSE 0x01 /* daylight savings time enable */ -#define RTCRB_TM 0x02 /* time format */ -#define RTCRB_TM_12HR 0x00 /* - 12 hour format */ -#define RTCRB_TM_24HR 0x02 /* - 24 hour format */ -#define RTCRB_DM 0x04 /* numeric value format */ -#define RTCRB_DM_BCD 0x00 /* - BCD */ -#define RTCRB_DM_BINARY 0x04 /* - binary */ -#define RTCRB_UIE 0x10 /* update interrupt disable */ -#define RTCRB_AIE 0x20 /* alarm interrupt disable */ -#define RTCRB_PIE 0x40 /* periodic interrupt disable */ -#define RTCRB_SET 0x80 /* clock update enable */ - -#define RTSRC __SYSREG(0xd860000c, u8) /* RTC status reg C */ -#define RTSRC_UF 0x10 /* update end interrupt flag */ -#define RTSRC_AF 0x20 /* alarm interrupt flag */ -#define RTSRC_PF 0x40 /* periodic interrupt flag */ -#define RTSRC_IRQF 0x80 /* interrupt flag */ - -#define RTIRQ 32 -#define RTICR GxICR(RTIRQ) - -/* - * MC146818 RTC compatibility defs for the MN10300 on-chip RTC - */ -#define RTC_PORT(x) 0xd8600000 -#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ - -#define CMOS_READ(addr) __SYSREG(0xd8600000 + (addr), u8) -#define CMOS_WRITE(val, addr) \ - do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0) - -#define RTC_IRQ RTIRQ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_RTC_REGS_H */ diff --git a/include/asm-mn10300/rtc.h b/include/asm-mn10300/rtc.h deleted file mode 100644 index c295194..0000000 --- a/include/asm-mn10300/rtc.h +++ /dev/null @@ -1,41 +0,0 @@ -/* MN10300 Real time clock definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_RTC_H -#define _ASM_RTC_H - -#ifdef CONFIG_MN10300_RTC - -#include - -extern void check_rtc_time(void); -extern void __init calibrate_clock(void); -extern unsigned long __init get_initial_rtc_time(void); - -#else /* !CONFIG_MN10300_RTC */ - -static inline void check_rtc_time(void) -{ -} - -static inline void calibrate_clock(void) -{ -} - -static inline unsigned long get_initial_rtc_time(void) -{ - return 0; -} - -#endif /* !CONFIG_MN10300_RTC */ - -#include - -#endif /* _ASM_RTC_H */ diff --git a/include/asm-mn10300/scatterlist.h b/include/asm-mn10300/scatterlist.h deleted file mode 100644 index 6753590..0000000 --- a/include/asm-mn10300/scatterlist.h +++ /dev/null @@ -1,55 +0,0 @@ -/* MN10300 Scatterlist definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SCATTERLIST_H -#define _ASM_SCATTERLIST_H - -#include - -/* - * Drivers must set either ->address or (preferred) page and ->offset - * to indicate where data must be transferred to/from. - * - * Using page is recommended since it handles highmem data as well as - * low mem. ->address is restricted to data which has a virtual mapping, and - * it will go away in the future. Updating to page can be automated very - * easily -- something like - * - * sg->address = some_ptr; - * - * can be rewritten as - * - * sg_set_page(virt_to_page(some_ptr)); - * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK; - * - * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens - */ -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* for highmem, page offset */ - dma_addr_t dma_address; - unsigned int length; -}; - -#define ISA_DMA_THRESHOLD (0x00ffffff) - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#endif /* _ASM_SCATTERLIST_H */ diff --git a/include/asm-mn10300/sections.h b/include/asm-mn10300/sections.h deleted file mode 100644 index 2b8c516..0000000 --- a/include/asm-mn10300/sections.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/sembuf.h b/include/asm-mn10300/sembuf.h deleted file mode 100644 index 301f3f9..0000000 --- a/include/asm-mn10300/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_SEMBUF_H -#define _ASM_SEMBUF_H - -/* - * The semid64_ds structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SEMBUF_H */ diff --git a/include/asm-mn10300/serial-regs.h b/include/asm-mn10300/serial-regs.h deleted file mode 100644 index 6498469..0000000 --- a/include/asm-mn10300/serial-regs.h +++ /dev/null @@ -1,160 +0,0 @@ -/* MN10300 on-board serial port module registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_SERIAL_REGS_H -#define _ASM_SERIAL_REGS_H - -#include -#include - -#ifdef __KERNEL__ - -/* serial port 0 */ -#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */ -#define SC01CTR_CK 0x0007 /* clock source select */ -#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ -#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ -#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ -#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ -#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */ -#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */ -#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ -#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ -#define SC01CTR_STB 0x0008 /* stop bit select */ -#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */ -#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */ -#define SC01CTR_PB 0x0070 /* parity bit select */ -#define SC01CTR_PB_NONE 0x0000 /* - no parity */ -#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ -#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ -#define SC01CTR_PB_EVEN 0x0060 /* - even parity */ -#define SC01CTR_PB_ODD 0x0070 /* - odd parity */ -#define SC01CTR_CLN 0x0080 /* character length */ -#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ -#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ -#define SC01CTR_TOE 0x0100 /* T input output enable */ -#define SC01CTR_OD 0x0200 /* bit order select */ -#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */ -#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */ -#define SC01CTR_MD 0x0c00 /* mode select */ -#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */ -#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */ -#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */ -#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */ -#define SC01CTR_IIC 0x1000 /* I2C mode select */ -#define SC01CTR_BKE 0x2000 /* break transmit enable */ -#define SC01CTR_RXE 0x4000 /* receive enable */ -#define SC01CTR_TXE 0x8000 /* transmit enable */ - -#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */ -#define SC01ICR_DMD 0x80 /* output data mode */ -#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */ -#define SC01ICR_TI 0x10 /* transmit interrupt cause */ -#define SC01ICR_RES 0x04 /* receive error select */ -#define SC01ICR_RI 0x01 /* receive interrupt cause */ - -#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */ -#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */ - -#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */ -#define SC01STR_OEF 0x0001 /* overrun error found */ -#define SC01STR_PEF 0x0002 /* parity error found */ -#define SC01STR_FEF 0x0004 /* framing error found */ -#define SC01STR_RBF 0x0010 /* receive buffer status */ -#define SC01STR_TBF 0x0020 /* transmit buffer status */ -#define SC01STR_RXF 0x0040 /* receive status */ -#define SC01STR_TXF 0x0080 /* transmit status */ -#define SC01STR_STF 0x0100 /* I2C start sequence found */ -#define SC01STR_SPF 0x0200 /* I2C stop sequence found */ - -#define SC0RXIRQ 20 /* timer 0 Receive IRQ */ -#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */ - -#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */ -#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */ - -/* serial port 1 */ -#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */ -#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */ -#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ -#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ -#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */ - -#define SC1RXIRQ 22 /* timer 1 Receive IRQ */ -#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */ - -#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */ -#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */ - -/* serial port 2 */ -#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */ -#define SC2CTR_CK 0x0003 /* clock source select */ -#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */ -#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */ -#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */ -#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */ -#define SC2CTR_STB 0x0008 /* stop bit select */ -#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */ -#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */ -#define SC2CTR_PB 0x0070 /* parity bit select */ -#define SC2CTR_PB_NONE 0x0000 /* - no parity */ -#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ -#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ -#define SC2CTR_PB_EVEN 0x0060 /* - even parity */ -#define SC2CTR_PB_ODD 0x0070 /* - odd parity */ -#define SC2CTR_CLN 0x0080 /* character length */ -#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ -#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ -#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */ -#define SC2CTR_OD 0x0200 /* bit order select */ -#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */ -#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */ -#define SC2CTR_TWS 0x1000 /* transmit wait select */ -#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */ -#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */ -#define SC2CTR_BKE 0x2000 /* break transmit enable */ -#define SC2CTR_RXE 0x4000 /* receive enable */ -#define SC2CTR_TXE 0x8000 /* transmit enable */ - -#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */ -#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */ -#define SC2ICR_TI 0x10 /* transmit interrupt cause */ -#define SC2ICR_RES 0x04 /* receive error select */ -#define SC2ICR_RI 0x01 /* receive interrupt cause */ - -#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ -#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ -#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */ -#define SC2STR_OEF 0x0001 /* overrun error found */ -#define SC2STR_PEF 0x0002 /* parity error found */ -#define SC2STR_FEF 0x0004 /* framing error found */ -#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */ -#define SC2STR_RBF 0x0010 /* receive buffer status */ -#define SC2STR_TBF 0x0020 /* transmit buffer status */ -#define SC2STR_RXF 0x0040 /* receive status */ -#define SC2STR_TXF 0x0080 /* transmit status */ - -#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */ - -#define SC2RXIRQ 24 /* serial 2 Receive IRQ */ -#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */ - -#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */ -#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */ - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_SERIAL_REGS_H */ diff --git a/include/asm-mn10300/serial.h b/include/asm-mn10300/serial.h deleted file mode 100644 index 99785a9..0000000 --- a/include/asm-mn10300/serial.h +++ /dev/null @@ -1,36 +0,0 @@ -/* Standard UART definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -/* - * The ASB2305 has an 18.432 MHz clock the UART - */ -#define BASE_BAUD (18432000 / 16) - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF -#endif - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#define HUB6_FLAGS 0 -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE -#endif - -#include diff --git a/include/asm-mn10300/setup.h b/include/asm-mn10300/setup.h deleted file mode 100644 index 08356c8..0000000 --- a/include/asm-mn10300/setup.h +++ /dev/null @@ -1,17 +0,0 @@ -/* MN10300 Setup declarations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SETUP_H -#define _ASM_SETUP_H - -extern void __init unit_setup(void); -extern void __init unit_init_IRQ(void); - -#endif /* _ASM_SETUP_H */ diff --git a/include/asm-mn10300/shmbuf.h b/include/asm-mn10300/shmbuf.h deleted file mode 100644 index 8f300cc..0000000 --- a/include/asm-mn10300/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASM_SHMBUF_H -#define _ASM_SHMBUF_H - -/* - * The shmid64_ds structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SHMBUF_H */ diff --git a/include/asm-mn10300/shmparam.h b/include/asm-mn10300/shmparam.h deleted file mode 100644 index ab666ed..0000000 --- a/include/asm-mn10300/shmparam.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_SHMPARAM_H -#define _ASM_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_SHMPARAM_H */ diff --git a/include/asm-mn10300/sigcontext.h b/include/asm-mn10300/sigcontext.h deleted file mode 100644 index 4de3aff..0000000 --- a/include/asm-mn10300/sigcontext.h +++ /dev/null @@ -1,52 +0,0 @@ -/* MN10300 Userspace signal context - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SIGCONTEXT_H -#define _ASM_SIGCONTEXT_H - -struct fpucontext { - /* Regular FPU environment */ - unsigned long fs[32]; /* fpu registers */ - unsigned long fpcr; /* fpu control register */ -}; - -struct sigcontext { - unsigned long d0; - unsigned long d1; - unsigned long d2; - unsigned long d3; - unsigned long a0; - unsigned long a1; - unsigned long a2; - unsigned long a3; - unsigned long e0; - unsigned long e1; - unsigned long e2; - unsigned long e3; - unsigned long e4; - unsigned long e5; - unsigned long e6; - unsigned long e7; - unsigned long lar; - unsigned long lir; - unsigned long mdr; - unsigned long mcvf; - unsigned long mcrl; - unsigned long mcrh; - unsigned long mdrq; - unsigned long sp; - unsigned long epsw; - unsigned long pc; - struct fpucontext *fpucontext; - unsigned long oldmask; -}; - - -#endif /* _ASM_SIGCONTEXT_H */ diff --git a/include/asm-mn10300/siginfo.h b/include/asm-mn10300/siginfo.h deleted file mode 100644 index 0815d29..0000000 --- a/include/asm-mn10300/siginfo.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/signal.h b/include/asm-mn10300/signal.h deleted file mode 100644 index e98817c..0000000 --- a/include/asm-mn10300/signal.h +++ /dev/null @@ -1,171 +0,0 @@ -/* MN10300 Signal definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SIGNAL_H -#define _ASM_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX (_NSIG-1) - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001U -#define SA_NOCLDWAIT 0x00000002U -#define SA_SIGINFO 0x00000004U -#define SA_ONSTACK 0x08000000U -#define SA_RESTART 0x10000000U -#define SA_NODEFER 0x40000000U -#define SA_RESETHAND 0x80000000U - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include - - -struct pt_regs; -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_SIGNAL_H */ diff --git a/include/asm-mn10300/smp.h b/include/asm-mn10300/smp.h deleted file mode 100644 index 4eb8c61..0000000 --- a/include/asm-mn10300/smp.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN10300 SMP support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SMP_H -#define _ASM_SMP_H - -#ifdef CONFIG_SMP -#error SMP not yet supported for MN10300 -#endif - -#endif diff --git a/include/asm-mn10300/socket.h b/include/asm-mn10300/socket.h deleted file mode 100644 index fb5daf4..0000000 --- a/include/asm-mn10300/socket.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-mn10300/sockios.h b/include/asm-mn10300/sockios.h deleted file mode 100644 index b03043a..0000000 --- a/include/asm-mn10300/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_SOCKIOS_H -#define _ASM_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_SOCKIOS_H */ diff --git a/include/asm-mn10300/spinlock.h b/include/asm-mn10300/spinlock.h deleted file mode 100644 index 4bf9c8b..0000000 --- a/include/asm-mn10300/spinlock.h +++ /dev/null @@ -1,16 +0,0 @@ -/* MN10300 spinlock support - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SPINLOCK_H -#define _ASM_SPINLOCK_H - -#error SMP spinlocks not implemented for MN10300 - -#endif /* _ASM_SPINLOCK_H */ diff --git a/include/asm-mn10300/stat.h b/include/asm-mn10300/stat.h deleted file mode 100644 index 63ff837..0000000 --- a/include/asm-mn10300/stat.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef _ASM_STAT_H -#define _ASM_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned int st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#define STAT_HAVE_NSEC 1 - -#endif /* _ASM_STAT_H */ diff --git a/include/asm-mn10300/statfs.h b/include/asm-mn10300/statfs.h deleted file mode 100644 index 0b91fe1..0000000 --- a/include/asm-mn10300/statfs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/string.h b/include/asm-mn10300/string.h deleted file mode 100644 index 47dbd43..0000000 --- a/include/asm-mn10300/string.h +++ /dev/null @@ -1,32 +0,0 @@ -/* MN10300 Optimised string functions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Modified by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_STRING_H -#define _ASM_STRING_H - -#define __HAVE_ARCH_MEMSET -#define __HAVE_ARCH_MEMCPY -#define __HAVE_ARCH_MEMMOVE - -extern void *memset(void *dest, int ch, size_t count); -extern void *memcpy(void *dest, const void *src, size_t count); -extern void *memmove(void *dest, const void *src, size_t count); - - -extern void __struct_cpy_bug(void); -#define struct_cpy(x, y) \ -({ \ - if (sizeof(*(x)) != sizeof(*(y))) \ - __struct_cpy_bug; \ - memcpy(x, y, sizeof(*(x))); \ -}) - -#endif /* _ASM_STRING_H */ diff --git a/include/asm-mn10300/swab.h b/include/asm-mn10300/swab.h deleted file mode 100644 index bd818a8..0000000 --- a/include/asm-mn10300/swab.h +++ /dev/null @@ -1,42 +0,0 @@ -/* MN10300 Byte-order primitive construction - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SWAB_H -#define _ASM_SWAB_H - -#include - -#ifdef __GNUC__ - -static inline __attribute__((const)) -__u32 __arch_swab32(__u32 x) -{ - __u32 ret; - asm("swap %1,%0" : "=r" (ret) : "r" (x)); - return ret; -} -#define __arch_swab32 __arch_swab32 - -static inline __attribute__((const)) -__u16 __arch_swab16(__u16 x) -{ - __u16 ret; - asm("swaph %1,%0" : "=r" (ret) : "r" (x)); - return ret; -} -#define __arch_swab32 __arch_swab32 - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#endif /* __GNUC__ */ - -#endif /* _ASM_SWAB_H */ diff --git a/include/asm-mn10300/system.h b/include/asm-mn10300/system.h deleted file mode 100644 index 8214fb7..0000000 --- a/include/asm-mn10300/system.h +++ /dev/null @@ -1,237 +0,0 @@ -/* MN10300 System definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SYSTEM_H -#define _ASM_SYSTEM_H - -#include - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#include - -struct task_struct; -struct thread_struct; - -extern asmlinkage -struct task_struct *__switch_to(struct thread_struct *prev, - struct thread_struct *next, - struct task_struct *prev_task); - -/* context switching is now performed out-of-line in switch_to.S */ -#define switch_to(prev, next, last) \ -do { \ - current->thread.wchan = (u_long) __builtin_return_address(0); \ - (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ - mb(); \ - current->thread.wchan = 0; \ -} while (0) - -#define arch_align_stack(x) (x) - -#define nop() asm volatile ("nop") - -#endif /* !__ASSEMBLY__ */ - -/* - * Force strict CPU ordering. - * And yes, this is required on UP too when we're talking - * to devices. - * - * For now, "wmb()" doesn't actually do anything, as all - * Intel CPU's follow what Intel calls a *Processor Order*, - * in which all writes are seen in the program order even - * outside the CPU. - * - * I expect future Intel CPU's to have a weaker ordering, - * but I'd also expect them to finally get their act together - * and add some real memory barriers if so. - * - * Some non intel clones support out of order store. wmb() ceases to be a - * nop for these. - */ - -#define mb() asm volatile ("": : :"memory") -#define rmb() mb() -#define wmb() asm volatile ("": : :"memory") - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#endif - -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define set_wmb(var, value) do { var = value; wmb(); } while (0) - -#define read_barrier_depends() do {} while (0) -#define smp_read_barrier_depends() do {} while (0) - -/*****************************************************************************/ -/* - * interrupt control - * - "disabled": run in IM1/2 - * - level 0 - GDB stub - * - level 1 - virtual serial DMA (if present) - * - level 5 - normal interrupt priority - * - level 6 - timer interrupt - * - "enabled": run in IM7 - */ -#ifdef CONFIG_MN10300_TTYSM -#define MN10300_CLI_LEVEL EPSW_IM_2 -#else -#define MN10300_CLI_LEVEL EPSW_IM_1 -#endif - -#define local_save_flags(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov epsw,%0 \n" \ - : "=d"(x) \ - ); \ -} while (0) - -#define local_irq_disable() \ -do { \ - asm volatile( \ - " and %0,epsw \n" \ - " or %1,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \ - ); \ -} while (0) - -#define local_irq_save(x) \ -do { \ - local_save_flags(x); \ - local_irq_disable(); \ -} while (0) - -/* - * we make sure local_irq_enable() doesn't cause priority inversion - */ -#ifndef __ASSEMBLY__ - -extern unsigned long __mn10300_irq_enabled_epsw; - -#endif - -#define local_irq_enable() \ -do { \ - unsigned long tmp; \ - \ - asm volatile( \ - " mov epsw,%0 \n" \ - " and %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,epsw \n" \ - : "=&d"(tmp) \ - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \ - ); \ -} while (0) - -#define local_irq_restore(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "d"(x) \ - : "memory", "cc" \ - ); \ -} while (0) - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \ -}) - -/* hook to save power by halting the CPU - * - called from the idle loop - * - must reenable interrupts (which takes three instruction cycles to complete) - */ -#define safe_halt() \ -do { \ - asm volatile(" or %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " bset %2,(%1) \n" \ - : \ - : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\ - : "cc" \ - ); \ -} while (0) - -#define STI or EPSW_IE|EPSW_IM,epsw -#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop - -/*****************************************************************************/ -/* - * MN10300 doesn't actually have an exchange instruction - */ -#ifndef __ASSEMBLY__ - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((struct __xchg_dummy *)(x)) - -static inline -unsigned long __xchg(volatile unsigned long *m, unsigned long val) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -#define xchg(ptr, v) \ - ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ - (unsigned long)(v))) - -static inline unsigned long __cmpxchg(volatile unsigned long *m, - unsigned long old, unsigned long new) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - if (retval == old) - *m = new; - local_irq_restore(flags); - return retval; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ - (unsigned long)(o), \ - (unsigned long)(n))) - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_SYSTEM_H */ diff --git a/include/asm-mn10300/termbits.h b/include/asm-mn10300/termbits.h deleted file mode 100644 index eb2b0dc..0000000 --- a/include/asm-mn10300/termbits.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef _ASM_TERMBITS_H -#define _ASM_TERMBITS_H - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ -#define CTVB 004000000000 /* VisioBraille Terminal flow control */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_TERMBITS_H */ diff --git a/include/asm-mn10300/termios.h b/include/asm-mn10300/termios.h deleted file mode 100644 index dd7cf61..0000000 --- a/include/asm-mn10300/termios.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef _ASM_TERMIOS_H -#define _ASM_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp, &(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) \ - copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) \ - copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) \ - copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) \ - copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _ASM_TERMIOS_H */ diff --git a/include/asm-mn10300/thread_info.h b/include/asm-mn10300/thread_info.h deleted file mode 100644 index 78a3881..0000000 --- a/include/asm-mn10300/thread_info.h +++ /dev/null @@ -1,170 +0,0 @@ -/* MN10300 Low-level thread information - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include - -#ifndef __ASSEMBLY__ -#include -#endif - -#define PREEMPT_ACTIVE 0x10000000 - -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE (4096) -#else -#define THREAD_SIZE (8192) -#endif - -#define STACK_WARN (THREAD_SIZE / 8) - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants - * must also be changed - */ -#ifndef __ASSEMBLY__ - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - __u32 cpu; /* current CPU */ - __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ - - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF for user-thead - 0-0xFFFFFFFF for kernel-thread - */ - struct restart_block restart_block; - - __u8 supervisor_stack[0]; -}; - -#else /* !__ASSEMBLY__ */ - -#ifndef __ASM_OFFSETS_H__ -#include -#endif - -#endif - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) -#define init_uregs \ - ((struct pt_regs *) \ - ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs))) - -extern struct thread_info *__current_ti; - -/* how to get the thread information struct from C */ -static inline __attribute__((const)) -struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - asm("mov sp,%0\n" - "and %1,%0\n" - : "=d" (ti) - : "i" (~(THREAD_SIZE - 1)) - : "cc"); - return ti; -} - -/* how to get the current stack pointer from C */ -static inline unsigned long current_stack_pointer(void) -{ - unsigned long sp; - asm("mov sp,%0; ":"=r" (sp)); - return sp; -} - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL) -#else -#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) -#endif - -#define free_thread_info(ti) kfree((ti)) -#define get_thread_info(ti) get_task_struct((ti)->task) -#define put_thread_info(ti) put_task_struct((ti)->task) - -#else /* !__ASSEMBLY__ */ - -#ifndef __VMLINUX_LDS__ -/* how to get the thread information struct from ASM */ -.macro GET_THREAD_INFO reg - mov sp,\reg - and -THREAD_SIZE,\reg -.endm -#endif -#endif - -/* - * thread information flags - * - these are process state flags that various assembly files may need to - * access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ -#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ -#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 /* OOM killer killed process */ -#define TIF_FREEZE 18 /* freezing for suspend */ - -#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE) -#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME) -#define _TIF_SIGPENDING +(1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED +(1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP) -#define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK) -#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG) -#define _TIF_FREEZE +(1 << TIF_FREEZE) - -#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ -#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-mn10300/timer-regs.h b/include/asm-mn10300/timer-regs.h deleted file mode 100644 index 1d883b7..0000000 --- a/include/asm-mn10300/timer-regs.h +++ /dev/null @@ -1,293 +0,0 @@ -/* AM33v2 on-board timer module registers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_TIMER_REGS_H -#define _ASM_TIMER_REGS_H - -#include -#include - -#ifdef __KERNEL__ - -/* timer prescalar control */ -#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */ -#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */ -#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */ - -/* 8 bit timers */ -#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */ -#define TM0MD_SRC 0x07 /* timer source */ -#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ -#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */ -#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM1MD __SYSREG(0xd4003001, u8) /* timer 1 mode register */ -#define TM1MD_SRC 0x07 /* timer source */ -#define TM1MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM1MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM1MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */ -#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */ -#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM2MD __SYSREG(0xd4003002, u8) /* timer 2 mode register */ -#define TM2MD_SRC 0x07 /* timer source */ -#define TM2MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM2MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM2MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */ -#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */ -#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM3MD __SYSREG(0xd4003003, u8) /* timer 3 mode register */ -#define TM3MD_SRC 0x07 /* timer source */ -#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */ -#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */ -#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM01MD __SYSREG(0xd4003000, u16) /* timer 0:1 mode register */ - -#define TM0BR __SYSREG(0xd4003010, u8) /* timer 0 base register */ -#define TM1BR __SYSREG(0xd4003011, u8) /* timer 1 base register */ -#define TM2BR __SYSREG(0xd4003012, u8) /* timer 2 base register */ -#define TM3BR __SYSREG(0xd4003013, u8) /* timer 3 base register */ -#define TM01BR __SYSREG(0xd4003010, u16) /* timer 0:1 base register */ - -#define TM0BC __SYSREGC(0xd4003020, u8) /* timer 0 binary counter */ -#define TM1BC __SYSREGC(0xd4003021, u8) /* timer 1 binary counter */ -#define TM2BC __SYSREGC(0xd4003022, u8) /* timer 2 binary counter */ -#define TM3BC __SYSREGC(0xd4003023, u8) /* timer 3 binary counter */ -#define TM01BC __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */ - -#define TM0IRQ 2 /* timer 0 IRQ */ -#define TM1IRQ 3 /* timer 1 IRQ */ -#define TM2IRQ 4 /* timer 2 IRQ */ -#define TM3IRQ 5 /* timer 3 IRQ */ - -#define TM0ICR GxICR(TM0IRQ) /* timer 0 uflow intr ctrl reg */ -#define TM1ICR GxICR(TM1IRQ) /* timer 1 uflow intr ctrl reg */ -#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */ -#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */ - -/* 16-bit timers 4,5 & 7-11 */ -#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */ -#define TM4MD_SRC 0x07 /* timer source */ -#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM4MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM4MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */ -#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM5MD __SYSREG(0xd4003082, u8) /* timer 5 mode register */ -#define TM5MD_SRC 0x07 /* timer source */ -#define TM5MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM5MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM5MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM5MD_SRC_TM4CASCADE 0x03 /* - cascade with timer 4 */ -#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */ -#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM7MD __SYSREG(0xd4003086, u8) /* timer 7 mode register */ -#define TM7MD_SRC 0x07 /* timer source */ -#define TM7MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM7MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM7MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */ -#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM8MD __SYSREG(0xd4003088, u8) /* timer 8 mode register */ -#define TM8MD_SRC 0x07 /* timer source */ -#define TM8MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM8MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM8MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM8MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ -#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */ -#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM9MD __SYSREG(0xd400308a, u8) /* timer 9 mode register */ -#define TM9MD_SRC 0x07 /* timer source */ -#define TM9MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM9MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM9MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM9MD_SRC_TM8CASCADE 0x03 /* - cascade with timer 8 */ -#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */ -#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM10MD __SYSREG(0xd400308c, u8) /* timer 10 mode register */ -#define TM10MD_SRC 0x07 /* timer source */ -#define TM10MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM10MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM10MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM10MD_SRC_TM9CASCADE 0x03 /* - cascade with timer 9 */ -#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */ -#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM11MD __SYSREG(0xd400308e, u8) /* timer 11 mode register */ -#define TM11MD_SRC 0x07 /* timer source */ -#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */ -#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ -#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ -#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ -#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ -#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ -#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */ -#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ -#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */ - -#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */ -#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */ -#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */ -#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */ -#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */ -#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */ -#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */ -#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ - -#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */ -#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */ -#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */ - -#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */ -#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */ -#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */ -#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */ -#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */ - -#define TM4IRQ 6 /* timer 4 IRQ */ -#define TM5IRQ 7 /* timer 5 IRQ */ -#define TM7IRQ 11 /* timer 7 IRQ */ -#define TM8IRQ 12 /* timer 8 IRQ */ -#define TM9IRQ 13 /* timer 9 IRQ */ -#define TM10IRQ 14 /* timer 10 IRQ */ -#define TM11IRQ 15 /* timer 11 IRQ */ - -#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */ -#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */ -#define TM7ICR GxICR(TM7IRQ) /* timer 7 uflow intr ctrl reg */ -#define TM8ICR GxICR(TM8IRQ) /* timer 8 uflow intr ctrl reg */ -#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */ -#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */ -#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */ - -/* 16-bit timer 6 */ -#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */ -#define TM6MD_SRC 0x0007 /* timer source */ -#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */ -#define TM6MD_SRC_IOCLK_8 0x0001 /* - 1/8 IOCLK */ -#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */ -#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */ -#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */ -#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */ -#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */ -#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ -#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */ -#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */ -#define TM6MD_PWM 0x3800 /* PWM output mode */ -#define TM6MD_PWM_DIS 0x0000 /* - disabled */ -#define TM6MD_PWM_10BIT 0x1000 /* - 10 bits mode */ -#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */ -#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */ -#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */ -#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */ -#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */ - -#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */ -#define TM6MDA_OUT 0x07 /* output select */ -#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */ -#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */ -#define TM6MDA_OUT_SETA 0x02 /* - set at match A */ -#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */ -#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */ -#define TM6MDA_MODE 0xc0 /* compare A register mode */ -#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ -#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ -#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ -#define TM6MDA_EDGE 0x20 /* compare A edge select */ -#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */ -#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */ -#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */ - -#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */ -#define TM6MDB_OUT 0x07 /* output select */ -#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */ -#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */ -#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */ -#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */ -#define TM6MDB_MODE 0xc0 /* compare B register mode */ -#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ -#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ -#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ -#define TM6MDB_EDGE 0x20 /* compare B edge select */ -#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */ -#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */ -#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */ - -#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */ -#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */ -#define TM6BC __SYSREG(0xd40030a4, u16) /* timer6 binary counter */ - -#define TM6IRQ 6 /* timer 6 IRQ */ -#define TM6AIRQ 9 /* timer 6A IRQ */ -#define TM6BIRQ 10 /* timer 6B IRQ */ - -#define TM6ICR GxICR(TM6IRQ) /* timer 6 uflow intr ctrl reg */ -#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */ -#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TIMER_REGS_H */ diff --git a/include/asm-mn10300/timex.h b/include/asm-mn10300/timex.h deleted file mode 100644 index 3944277..0000000 --- a/include/asm-mn10300/timex.h +++ /dev/null @@ -1,33 +0,0 @@ -/* MN10300 Architecture time management specifications - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_TIMEX_H -#define _ASM_TIMEX_H - -#include -#include - -#define TICK_SIZE (tick_nsec / 1000) - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set - * to something appropriate, but what? */ - -extern cycles_t cacheflush_time; - -#ifdef __KERNEL__ - -static inline cycles_t get_cycles(void) -{ - return read_timestamp_counter(); -} - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TIMEX_H */ diff --git a/include/asm-mn10300/tlb.h b/include/asm-mn10300/tlb.h deleted file mode 100644 index 65d232b..0000000 --- a/include/asm-mn10300/tlb.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN10300 TLB definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_TLB_H -#define _ASM_TLB_H - -#include - -extern void check_pgt_cache(void); - -/* - * we don't need any special per-pte or per-vma handling... - */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - -/* - * .. because we flush the whole mm when it fills up - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -/* for now, just use the generic stuff */ -#include - -#endif /* _ASM_TLB_H */ diff --git a/include/asm-mn10300/tlbflush.h b/include/asm-mn10300/tlbflush.h deleted file mode 100644 index e023986..0000000 --- a/include/asm-mn10300/tlbflush.h +++ /dev/null @@ -1,80 +0,0 @@ -/* MN10300 TLB flushing functions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_TLBFLUSH_H -#define _ASM_TLBFLUSH_H - -#include - -#define __flush_tlb() \ -do { \ - int w; \ - __asm__ __volatile__ \ - (" mov %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,%1 \n" \ - : "=d"(w) \ - : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \ - : "memory" \ - ); \ -} while (0) - -#define __flush_tlb_all() __flush_tlb() -#define __flush_tlb_one(addr) __flush_tlb() - - -/* - * TLB flushing: - * - * - flush_tlb() flushes the current mm struct TLBs - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(mm, start, end) flushes a range of pages - * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables - */ -#define flush_tlb_all() \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_mm(mm) \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_range(vma, start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - - -#define __flush_tlb_global() flush_tlb_all() -#define flush_tlb() flush_tlb_all() -#define flush_tlb_kernel_range(start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - flush_tlb_all(); \ -} while (0) - -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr); - -#define flush_tlb_pgtables(mm, start, end) do {} while (0) - -#endif /* _ASM_TLBFLUSH_H */ diff --git a/include/asm-mn10300/topology.h b/include/asm-mn10300/topology.h deleted file mode 100644 index 5428f33..0000000 --- a/include/asm-mn10300/topology.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mn10300/types.h b/include/asm-mn10300/types.h deleted file mode 100644 index 7b9f010..0000000 --- a/include/asm-mn10300/types.h +++ /dev/null @@ -1,38 +0,0 @@ -/* MN10300 Basic type definitions - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_TYPES_H -#define _ASM_TYPES_H - -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ -typedef u32 dma_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TYPES_H */ diff --git a/include/asm-mn10300/uaccess.h b/include/asm-mn10300/uaccess.h deleted file mode 100644 index 8a3a4dd..0000000 --- a/include/asm-mn10300/uaccess.h +++ /dev/null @@ -1,490 +0,0 @@ -/* MN10300 userspace access functions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UACCESS_H -#define _ASM_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF) -#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF) -#define USER_DS MAKE_MM_SEG(TASK_SIZE) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) -#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -#define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * check that a range of addresses falls within the current address limit - */ -static inline int ___range_ok(unsigned long addr, unsigned int size) -{ - int flag = 1, tmp; - - asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */ - " bcs 0f \n" - " cmp %4,%1 \n" /* jump if addr+size>limit (error) */ - " bhi 0f \n" - " clr %0 \n" /* mark okay */ - "0: \n" - : "=r"(flag), "=&r"(tmp) - : "1"(addr), "ir"(size), - "r"(current_thread_info()->addr_limit.seg), "0"(flag) - : "cc" - ); - - return flag; -} - -#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size)) - -#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0) - -static inline int verify_area(int type, const void *addr, unsigned long size) -{ - return access_ok(type, addr, size) ? 0 : -EFAULT; -} - - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern int fixup_exception(struct pt_regs *regs); - -#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) -#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -/* - * The "xxx_ret" versions return constant specified in third argument, if - * something bad happens. These macros can be optimized for the - * case of just returning from the function xxx_ret is used. - */ - -#define put_user_ret(x, ptr, ret) \ - ({ if (put_user((x), (ptr))) return (ret); }) -#define get_user_ret(x, ptr, ret) \ - ({ if (get_user((x), (ptr))) return (ret); }) -#define __put_user_ret(x, ptr, ret) \ - ({ if (__put_user((x), (ptr))) return (ret); }) -#define __get_user_ret(x, ptr, ret) \ - ({ if (__get_user((x), (ptr))) return (ret); }) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - __typeof(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - __typeof__(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - if (likely(__access_ok(__gu_addr,size))) { \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - } \ - else { \ - __gu_err = -EFAULT; \ - __gu_val = 0; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - -#define __get_user_asm(INSN) \ -({ \ - asm volatile( \ - "1:\n" \ - " mov"INSN" %2,%1\n" \ - " mov 0,%0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n\t" \ - " mov %3,%0\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "=&r" (__gu_err), "=&r" (__gu_val) \ - : "m" (__m(__gu_addr)), "i" (-EFAULT)); \ -}) - -extern int __get_user_unknown(void); - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - union { \ - __typeof__(*(ptr)) val; \ - u32 bits[2]; \ - } __pu_val; \ - unsigned long __pu_addr; \ - int __pu_err; \ - __pu_val.val = (x); \ - __pu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: __put_user_asm("bu"); break; \ - case 2: __put_user_asm("hu"); break; \ - case 4: __put_user_asm("" ); break; \ - case 8: __put_user_asm8(); break; \ - default: __pu_err = __put_user_unknown(); break; \ - } \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - union { \ - __typeof__(*(ptr)) val; \ - u32 bits[2]; \ - } __pu_val; \ - unsigned long __pu_addr; \ - int __pu_err; \ - __pu_val.val = (x); \ - __pu_addr = (unsigned long) (ptr); \ - if (likely(__access_ok(__pu_addr, size))) { \ - switch (size) { \ - case 1: __put_user_asm("bu"); break; \ - case 2: __put_user_asm("hu"); break; \ - case 4: __put_user_asm("" ); break; \ - case 8: __put_user_asm8(); break; \ - default: __pu_err = __put_user_unknown(); break; \ - } \ - } \ - else { \ - __pu_err = -EFAULT; \ - } \ - __pu_err; \ -}) - -#define __put_user_asm(INSN) \ -({ \ - asm volatile( \ - "1:\n" \ - " mov"INSN" %1,%2\n" \ - " mov 0,%0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n" \ - " mov %3,%0\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "=&r" (__pu_err) \ - : "r" (__pu_val.val), "m" (__m(__pu_addr)), \ - "i" (-EFAULT) \ - ); \ -}) - -#define __put_user_asm8() \ -({ \ - asm volatile( \ - "1: mov %1,%3 \n" \ - "2: mov %2,%4 \n" \ - " mov 0,%0 \n" \ - "3: \n" \ - " .section .fixup,\"ax\" \n" \ - "4: \n" \ - " mov %5,%0 \n" \ - " jmp 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4 \n" \ - " .long 1b, 4b \n" \ - " .long 2b, 4b \n" \ - " .previous \n" \ - : "=&r" (__pu_err) \ - : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \ - "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \ - "i" (-EFAULT) \ - ); \ -}) - -extern int __put_user_unknown(void); - - -/* - * Copy To/From Userspace - */ -/* Generic arbitrary sized copy. */ -#define __copy_user(to, from, size) \ -do { \ - if (size) { \ - void *__to = to; \ - const void *__from = from; \ - int w; \ - asm volatile( \ - "0: movbu (%0),%3;\n" \ - "1: movbu %3,(%1);\n" \ - " inc %0;\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 0b;\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - " .previous\n" \ - : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ - : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ - } \ -} while (0) - -#define __copy_user_zeroing(to, from, size) \ -do { \ - if (size) { \ - void *__to = to; \ - const void *__from = from; \ - int w; \ - asm volatile( \ - "0: movbu (%0),%3;\n" \ - "1: movbu %3,(%1);\n" \ - " inc %0;\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 0b;\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n" \ - " mov %2,%0\n" \ - " clr %3\n" \ - "4: movbu %3,(%1);\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 4b;\n" \ - " mov %0,%2\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - " .previous\n" \ - : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ - : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ - } \ -} while (0) - -/* We let the __ versions of copy_from/to_user inline, because they're often - * used in fast paths and have only a small space overhead. - */ -static inline -unsigned long __generic_copy_from_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __copy_user_zeroing(to, from, n); - return n; -} - -static inline -unsigned long __generic_copy_to_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __copy_user(to, from, n); - return n; -} - - -#if 0 -#error don't use - these macros don't increment to & from pointers -/* Optimize just a little bit when we know the size of the move. */ -#define __constant_copy_user(to, from, size) \ -do { \ - asm volatile( \ - " mov %0,a0;\n" \ - "0: movbu (%1),d3;\n" \ - "1: movbu d3,(%2);\n" \ - " add -1,a0;\n" \ - " bne 0b;\n" \ - "2:;" \ - ".section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : \ - : "d"(size), "d"(to), "d"(from) \ - : "d3", "a0"); \ -} while (0) - -/* Optimize just a little bit when we know the size of the move. */ -#define __constant_copy_user_zeroing(to, from, size) \ -do { \ - asm volatile( \ - " mov %0,a0;\n" \ - "0: movbu (%1),d3;\n" \ - "1: movbu d3,(%2);\n" \ - " add -1,a0;\n" \ - " bne 0b;\n" \ - "2:;" \ - ".section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : \ - : "d"(size), "d"(to), "d"(from) \ - : "d3", "a0"); \ -} while (0) - -static inline -unsigned long __constant_copy_to_user(void *to, const void *from, - unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - __constant_copy_user(to, from, n); - return n; -} - -static inline -unsigned long __constant_copy_from_user(void *to, const void *from, - unsigned long n) -{ - if (access_ok(VERIFY_READ, from, n)) - __constant_copy_user_zeroing(to, from, n); - return n; -} - -static inline -unsigned long __constant_copy_to_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __constant_copy_user(to, from, n); - return n; -} - -static inline -unsigned long __constant_copy_from_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __constant_copy_user_zeroing(to, from, n); - return n; -} -#endif - -extern unsigned long __generic_copy_to_user(void __user *, const void *, - unsigned long); -extern unsigned long __generic_copy_from_user(void *, const void __user *, - unsigned long); - -#define __copy_to_user_inatomic(to, from, n) \ - __generic_copy_to_user_nocheck((to), (from), (n)) -#define __copy_from_user_inatomic(to, from, n) \ - __generic_copy_from_user_nocheck((to), (from), (n)) - -#define __copy_to_user(to, from, n) \ -({ \ - might_sleep(); \ - __copy_to_user_inatomic((to), (from), (n)); \ -}) - -#define __copy_from_user(to, from, n) \ -({ \ - might_sleep(); \ - __copy_from_user_inatomic((to), (from), (n)); \ -}) - - -#define copy_to_user(to, from, n) __generic_copy_to_user((to), (from), (n)) -#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n)) - -extern long strncpy_from_user(char *dst, const char __user *src, long count); -extern long __strncpy_from_user(char *dst, const char __user *src, long count); -extern long strnlen_user(const char __user *str, long n); -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) -extern unsigned long clear_user(void __user *mem, unsigned long len); -extern unsigned long __clear_user(void __user *mem, unsigned long len); - -#endif /* _ASM_UACCESS_H */ diff --git a/include/asm-mn10300/ucontext.h b/include/asm-mn10300/ucontext.h deleted file mode 100644 index fcab5c1..0000000 --- a/include/asm-mn10300/ucontext.h +++ /dev/null @@ -1,22 +0,0 @@ -/* MN10300 User context - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UCONTEXT_H -#define _ASM_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _ASM_UCONTEXT_H */ diff --git a/include/asm-mn10300/unaligned.h b/include/asm-mn10300/unaligned.h deleted file mode 100644 index 0df6713..0000000 --- a/include/asm-mn10300/unaligned.h +++ /dev/null @@ -1,20 +0,0 @@ -/* MN10300 Unaligned memory access handling - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_MN10300_UNALIGNED_H -#define _ASM_MN10300_UNALIGNED_H - -#include -#include - -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le - -#endif /* _ASM_MN10300_UNALIGNED_H */ diff --git a/include/asm-mn10300/unistd.h b/include/asm-mn10300/unistd.h deleted file mode 100644 index 543a4f9..0000000 --- a/include/asm-mn10300/unistd.h +++ /dev/null @@ -1,390 +0,0 @@ -/* MN10300 System call number list - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNISTD_H -#define _ASM_UNISTD_H - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86old 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_vm86 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_madvise1 219 /* delete when C lib stub is removed */ -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -/* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_cacheflush 289 -#define __NR_ioprio_set 290 -#define __NR_ioprio_get 291 -#define __NR_inotify_init 292 -#define __NR_inotify_add_watch 293 -#define __NR_inotify_rm_watch 294 -#define __NR_migrate_pages 295 -#define __NR_openat 296 -#define __NR_mkdirat 297 -#define __NR_mknodat 298 -#define __NR_fchownat 299 -#define __NR_futimesat 300 -#define __NR_fstatat64 301 -#define __NR_unlinkat 302 -#define __NR_renameat 303 -#define __NR_linkat 304 -#define __NR_symlinkat 305 -#define __NR_readlinkat 306 -#define __NR_fchmodat 307 -#define __NR_faccessat 308 -#define __NR_pselect6 309 -#define __NR_ppoll 310 -#define __NR_unshare 311 -#define __NR_set_robust_list 312 -#define __NR_get_robust_list 313 -#define __NR_splice 314 -#define __NR_sync_file_range 315 -#define __NR_tee 316 -#define __NR_vmsplice 317 -#define __NR_move_pages 318 -#define __NR_getcpu 319 -#define __NR_epoll_pwait 320 -#define __NR_utimensat 321 -#define __NR_signalfd 322 -#define __NR_timerfd_create 323 -#define __NR_eventfd 324 -#define __NR_fallocate 325 -#define __NR_timerfd_settime 326 -#define __NR_timerfd_gettime 327 -#define __NR_signalfd4 328 -#define __NR_eventfd2 329 -#define __NR_epoll_create1 330 -#define __NR_dup3 331 -#define __NR_pipe2 332 -#define __NR_inotify_init1 333 - -#ifdef __KERNEL__ - -#define NR_syscalls 326 - -/* - * specify the deprecated syscalls we want to support on this arch - */ -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_UNISTD_H */ diff --git a/include/asm-mn10300/unit-asb2303/clock.h b/include/asm-mn10300/unit-asb2303/clock.h deleted file mode 100644 index 8b450e9..0000000 --- a/include/asm-mn10300/unit-asb2303/clock.h +++ /dev/null @@ -1,45 +0,0 @@ -/* ASB2303-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_CLOCK_H -#define _ASM_UNIT_CLOCK_H - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ - -#else /* !CONFIG_MN10300_RTC */ - -#define MN10300_IOCLK 33333333UL -/* #define MN10300_IOBCLK 66666666UL */ - -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/include/asm-mn10300/unit-asb2303/leds.h b/include/asm-mn10300/unit-asb2303/leds.h deleted file mode 100644 index 3a7543e..0000000 --- a/include/asm-mn10300/unit-asb2303/leds.h +++ /dev/null @@ -1,43 +0,0 @@ -/* ASB2303-specific LEDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_LEDS_H -#define _ASM_UNIT_LEDS_H - -#include -#include -#include - -#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32) -#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32) - -/* - * use the 7-segment LEDs to indicate states - */ - -/* flip the 7-segment LEDs between "G" and "-" */ -#define mn10300_set_gdbleds(ONOFF) \ -do { \ - ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \ -} while (0) - -/* indicate double-fault by displaying "d" on the LEDs */ -#define mn10300_set_dbfleds \ - mov 0x43,d0 ; \ - movbu d0,(ASB2303_7SEGLEDS) - -#ifndef __ASSEMBLY__ -extern void peripheral_leds_display_exception(enum exception_code code); -extern void peripheral_leds_led_chase(void); -extern void debug_to_serial(const char *p, int n); -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UNIT_LEDS_H */ diff --git a/include/asm-mn10300/unit-asb2303/serial.h b/include/asm-mn10300/unit-asb2303/serial.h deleted file mode 100644 index 0d55cf5..0000000 --- a/include/asm-mn10300/unit-asb2303/serial.h +++ /dev/null @@ -1,136 +0,0 @@ -/* ASB2303-specific 8250 serial ports - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include -#include -#include - -#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 -#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000 - -#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ - -/* - * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ -#endif - -#ifndef __ASSEMBLY__ - -#define LSR_WAIT_FOR(STATE) \ -do { \ - while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \ -} while (0) -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \ -} while (0) -#define FLOWCTL_CLEAR(LINE) \ -do { \ - GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_SET(LINE) \ -do { \ - GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - GDBPORT_SERIAL_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - GDBPORT_SERIAL_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/include/asm-mn10300/unit-asb2303/smc91111.h b/include/asm-mn10300/unit-asb2303/smc91111.h deleted file mode 100644 index dd456e9..0000000 --- a/include/asm-mn10300/unit-asb2303/smc91111.h +++ /dev/null @@ -1,50 +0,0 @@ -/* Support for the SMC91C111 NIC on an ASB2303 - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SMC91111_H -#define _ASM_UNIT_SMC91111_H - -#include - -#define SMC91111_BASE 0xAA000300UL -#define SMC91111_BASE_END 0xAA000400UL -#define SMC91111_IRQ XIRQ3 - -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_NOWAIT 1 -#define SMC_IRQ_FLAGS (0) - -#if SMC_CAN_USE_8BIT -#define SMC_inb(a, r) inb((unsigned long) ((a) + (r))) -#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r))) -#endif - -#if SMC_CAN_USE_16BIT -#define SMC_inw(a, r) inw((unsigned long) ((a) + (r))) -#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r))) -#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l)) -#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l)) -#endif - -#if SMC_CAN_USE_32BIT -#define SMC_inl(a, r) inl((unsigned long) ((a) + (r))) -#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r))) -#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l)) -#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l)) -#endif - -#define RPC_LSA_DEFAULT RPC_LED_100_10 -#define RPC_LSB_DEFAULT RPC_LED_TX_RX - -#define set_irq_type(irq, type) - -#endif /* _ASM_UNIT_SMC91111_H */ diff --git a/include/asm-mn10300/unit-asb2303/timex.h b/include/asm-mn10300/unit-asb2303/timex.h deleted file mode 100644 index 7e54b0c..0000000 --- a/include/asm-mn10300/unit-asb2303/timex.h +++ /dev/null @@ -1,135 +0,0 @@ -/* ASB2303-specific timer specifcations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_TIMEX_H -#define _ASM_UNIT_TIMEX_H - -#ifndef __ASSEMBLY__ -#include -#endif /* __ASSEMBLY__ */ - -#include -#include - -/* - * jiffies counter specifications - */ - -#define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR -#define TMJCIRQ TM1IRQ -#define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 - -#ifndef __ASSEMBLY__ - -static inline void startup_jiffies_counter(void) -{ - unsigned rate; - u16 md, t16; - - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - if (rate > TMJCBR_MAX) - BUG(); - } - } - - TMJCBR = rate - 1; - t16 = TMJCBR; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; - - t16 = TMJCMD; - - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} - -static inline void shutdown_jiffies_counter(void) -{ -} - -#endif /* !__ASSEMBLY__ */ - - -/* - * timestamp counter specifications - */ - -#define TMTSCBR_MAX 0xffffffff -#define TMTSCBC TM45BC - -#ifndef __ASSEMBLY__ - -static inline void startup_timestamp_counter(void) -{ - /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time - * - count down from 4Gig-1 to 0 and wrap at IOCLK rate - */ - TM45BR = TMTSCBR_MAX; - - TM4MD = TM4MD_SRC_IOCLK; - TM4MD |= TM4MD_INIT_COUNTER; - TM4MD &= ~TM4MD_INIT_COUNTER; - TM4ICR = 0; - - TM5MD = TM5MD_SRC_TM4CASCADE; - TM5MD |= TM5MD_INIT_COUNTER; - TM5MD &= ~TM5MD_INIT_COUNTER; - TM5ICR = 0; - - TM5MD |= TM5MD_COUNT_ENABLE; - TM4MD |= TM4MD_COUNT_ENABLE; -} - -static inline void shutdown_timestamp_counter(void) -{ - TM4MD = 0; - TM5MD = 0; -} - -/* - * we use a cascaded pair of 16-bit down-counting timers to count I/O - * clock cycles for the purposes of time keeping - */ -typedef unsigned long cycles_t; - -static inline cycles_t read_timestamp_counter(void) -{ - return (cycles_t)TMTSCBC; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/include/asm-mn10300/unit-asb2305/clock.h b/include/asm-mn10300/unit-asb2305/clock.h deleted file mode 100644 index 7d51484..0000000 --- a/include/asm-mn10300/unit-asb2305/clock.h +++ /dev/null @@ -1,45 +0,0 @@ -/* ASB2305-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_CLOCK_H -#define _ASM_UNIT_CLOCK_H - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ - -#else /* !CONFIG_MN10300_RTC */ - -#define MN10300_IOCLK 33333333UL -/* #define MN10300_IOBCLK 66666666UL */ - -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/include/asm-mn10300/unit-asb2305/leds.h b/include/asm-mn10300/unit-asb2305/leds.h deleted file mode 100644 index bc471f6..0000000 --- a/include/asm-mn10300/unit-asb2305/leds.h +++ /dev/null @@ -1,51 +0,0 @@ -/* ASB2305-specific LEDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_LEDS_H -#define _ASM_UNIT_LEDS_H - -#include -#include -#include - -#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32) - -/* perform a hard reset by driving PIO06 low */ -#define mn10300_unit_hard_reset() \ -do { \ - P0OUT &= 0xbf; \ - P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \ -} while (0) - -/* - * use the 7-segment LEDs to indicate states - */ -/* indicate double-fault by displaying "db-f" on the LEDs */ -#define mn10300_set_dbfleds \ - mov 0x43077f1d,d0 ; \ - mov d0,(ASB2305_7SEGLEDS) - -/* flip the 7-segment LEDs between "Gdb-" and "----" */ -#define mn10300_set_gdbleds(ONOFF) \ -do { \ - ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ -} while (0) - -#ifndef __ASSEMBLY__ -extern void peripheral_leds_display_exception(enum exception_code); -extern void peripheral_leds_led_chase(void); -extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_rtc(void); -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UNIT_LEDS_H */ diff --git a/include/asm-mn10300/unit-asb2305/serial.h b/include/asm-mn10300/unit-asb2305/serial.h deleted file mode 100644 index 73d31d6..0000000 --- a/include/asm-mn10300/unit-asb2305/serial.h +++ /dev/null @@ -1,120 +0,0 @@ -/* ASB2305-specific 8250 serial ports - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include -#include -#include - -#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 -#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) - -#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ - -/* - * dispose of the /dev/ttyS0 serial port - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#error The ASB2305 doesnt have a /dev/ttyS1 -#endif - -#ifndef __ASSEMBLY__ - -#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) - -#define LSR_WAIT_FOR(STATE) \ -do { \ - while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ -} while (0) -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ -} while (0) -#define FLOWCTL_CLEAR(LINE) \ -do { \ - TTYS0_MCR &= ~UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_SET(LINE) \ -do { \ - TTYS0_MCR |= UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - TTYS0_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - TTYS0_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/include/asm-mn10300/unit-asb2305/timex.h b/include/asm-mn10300/unit-asb2305/timex.h deleted file mode 100644 index 10e1bfe..0000000 --- a/include/asm-mn10300/unit-asb2305/timex.h +++ /dev/null @@ -1,135 +0,0 @@ -/* ASB2305 timer specifcations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_TIMEX_H -#define _ASM_UNIT_TIMEX_H - -#ifndef __ASSEMBLY__ -#include -#endif /* __ASSEMBLY__ */ - -#include -#include - -/* - * jiffies counter specifications - */ - -#define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR -#define TMJCIRQ TM1IRQ -#define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 - -#ifndef __ASSEMBLY__ - -static inline void startup_jiffies_counter(void) -{ - unsigned rate; - u16 md, t16; - - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - if (rate > TMJCBR_MAX) - BUG(); - } - } - - TMJCBR = rate - 1; - t16 = TMJCBR; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; - - t16 = TMJCMD; - - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} - -static inline void shutdown_jiffies_counter(void) -{ -} - -#endif /* !__ASSEMBLY__ */ - - -/* - * timestamp counter specifications - */ - -#define TMTSCBR_MAX 0xffffffff -#define TMTSCBC TM45BC - -#ifndef __ASSEMBLY__ - -static inline void startup_timestamp_counter(void) -{ - /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time - * - count down from 4Gig-1 to 0 and wrap at IOCLK rate - */ - TM45BR = TMTSCBR_MAX; - - TM4MD = TM4MD_SRC_IOCLK; - TM4MD |= TM4MD_INIT_COUNTER; - TM4MD &= ~TM4MD_INIT_COUNTER; - TM4ICR = 0; - - TM5MD = TM5MD_SRC_TM4CASCADE; - TM5MD |= TM5MD_INIT_COUNTER; - TM5MD &= ~TM5MD_INIT_COUNTER; - TM5ICR = 0; - - TM5MD |= TM5MD_COUNT_ENABLE; - TM4MD |= TM4MD_COUNT_ENABLE; -} - -static inline void shutdown_timestamp_counter(void) -{ - TM4MD = 0; - TM5MD = 0; -} - -/* - * we use a cascaded pair of 16-bit down-counting timers to count I/O - * clock cycles for the purposes of time keeping - */ -typedef unsigned long cycles_t; - -static inline cycles_t read_timestamp_counter(void) -{ - return (cycles_t) TMTSCBC; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/include/asm-mn10300/user.h b/include/asm-mn10300/user.h deleted file mode 100644 index e119390..0000000 --- a/include/asm-mn10300/user.h +++ /dev/null @@ -1,53 +0,0 @@ -/* MN10300 User process data - * - * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_USER_H -#define _ASM_USER_H - -#include -#include - -#ifndef __ASSEMBLY__ -/* - * When the kernel dumps core, it starts by dumping the user struct - this will - * be used by gdb to figure out where the data and stack segments are within - * the file, and what virtual addresses to use. - */ -struct user { - /* We start with the registers, to mimic the way that "memory" is - * returned from the ptrace(3,...) function. - */ - struct pt_regs regs; /* Where the registers are actually stored */ - - /* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - int reserved; /* No longer used */ - struct user_pt_regs *u_ar0; /* Used by gdb to help find the values for */ - - /* the registers */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; -#endif - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR +(u.start_code) -#define HOST_STACK_END_ADDR +(u.start_stack + u.u_ssize * NBPG) - -#endif /* _ASM_USER_H */ diff --git a/include/asm-mn10300/vga.h b/include/asm-mn10300/vga.h deleted file mode 100644 index 0163e50..0000000 --- a/include/asm-mn10300/vga.h +++ /dev/null @@ -1,17 +0,0 @@ -/* MN10300 VGA register definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_VGA_H -#define _ASM_VGA_H - - - -#endif /* _ASM_VGA_H */ diff --git a/include/asm-mn10300/xor.h b/include/asm-mn10300/xor.h deleted file mode 100644 index c82eb12..0000000 --- a/include/asm-mn10300/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v0.10.2 From 2f2a2132ff056bb45697dc855eb4fd95b70b38cb Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 10 Apr 2009 14:33:48 +0100 Subject: Separate out the proc- and unit-specific header directories from the general MN10300 arch headers and place them instead in the same directories as contain the .c files for the processor and unit implementations. This permits the symlinks include/asm/proc and include/asm/unit to be dispensed with. This does, however, require that #include be converted to #include and similarly for asm/unit -> unit. Signed-off-by: David Howells diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile index a5985ee..dd0c8ff 100644 --- a/arch/mn10300/Makefile +++ b/arch/mn10300/Makefile @@ -94,42 +94,8 @@ ifdef CONFIG_DEBUG_INFO KBUILD_AFLAGS += -Wa,--gdwarf2 endif -################################################################################################### # -# juggle some symlinks in the MN10300 asm include dir +# include the appropriate processor- and unit-specific headers # -# Update machine proc and unit symlinks if something which affects -# them changed. We use .proc / .unit to indicate when they were -# updated last, otherwise make uses the target directory mtime. -# -################################################################################################### - -# processor specific definitions -arch/mn10300/include/asm/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf - @echo ' SYMLINK arch/mn10300/include/asm/proc -> arch/mn10300/include/asm/proc-$(PROCESSOR)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p arch/mn10300/include/asm - $(Q)ln -fsn $(srctree)/arch/mn10300/include/asm/proc-$(PROCESSOR) arch/mn10300/include/asm/proc -else - $(Q)ln -fsn proc-$(PROCESSOR) arch/mn10300/include/asm/proc -endif - @touch $@ - -CLEAN_FILES += arch/mn10300/include/asm/proc arch/mn10300/include/asm/.proc - -prepare: arch/mn10300/include/asm/.proc - -# unit specific definitions -arch/mn10300/include/asm/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf - @echo ' SYMLINK arch/mn10300/include/asm/unit -> arch/mn10300/include/asm/unit-$(UNIT)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p arch/mn10300/include/asm - $(Q)ln -fsn $(srctree)/arch/mn10300/include/asm/unit-$(UNIT) arch/mn10300/include/asm/unit -else - $(Q)ln -fsn unit-$(UNIT) arch/mn10300/include/asm/unit -endif - @touch $@ - -CLEAN_FILES += arch/mn10300/include/asm/unit arch/mn10300/include/asm/.unit - -prepare: arch/mn10300/include/asm/.unit +KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/proc-$(PROCESSOR)/include +KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/unit-$(UNIT)/include diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h index 9e01122..e03cfa2 100644 --- a/arch/mn10300/include/asm/cache.h +++ b/arch/mn10300/include/asm/cache.h @@ -13,7 +13,7 @@ #define _ASM_CACHE_H #include -#include +#include #ifndef __ASSEMBLY__ #define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES) diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h index 53b3801..25c045d 100644 --- a/arch/mn10300/include/asm/irq.h +++ b/arch/mn10300/include/asm/irq.h @@ -16,7 +16,7 @@ #include #include -#include +#include /* this number is used when no interrupt has been assigned */ #define NO_IRQ INT_MAX diff --git a/arch/mn10300/include/asm/proc-mn103e010/cache.h b/arch/mn10300/include/asm/proc-mn103e010/cache.h deleted file mode 100644 index bdc1f9a..0000000 --- a/arch/mn10300/include/asm/proc-mn103e010/cache.h +++ /dev/null @@ -1,33 +0,0 @@ -/* MN103E010 Cache specification - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CACHE_H -#define _ASM_PROC_CACHE_H - -/* L1 cache */ - -#define L1_CACHE_NWAYS 4 /* number of ways in caches */ -#define L1_CACHE_NENTRIES 256 /* number of entries in each way */ -#define L1_CACHE_BYTES 16 /* bytes per entry */ -#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */ -#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */ - -#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ -#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ -#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */ -#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ - -/* - * specification of the interval between interrupt checking intervals whilst - * managing the cache with the interrupts disabled - */ -#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 - -#endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/include/asm/proc-mn103e010/clock.h b/arch/mn10300/include/asm/proc-mn103e010/clock.h deleted file mode 100644 index caf9983..0000000 --- a/arch/mn10300/include/asm/proc-mn103e010/clock.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN103E010-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_PROC_CLOCK_H -#define _ASM_PROC_CLOCK_H - -#include - -#define MN10300_WDCLK MN10300_IOCLK - -#endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/include/asm/proc-mn103e010/irq.h b/arch/mn10300/include/asm/proc-mn103e010/irq.h deleted file mode 100644 index aa6ee8f..0000000 --- a/arch/mn10300/include/asm/proc-mn103e010/irq.h +++ /dev/null @@ -1,34 +0,0 @@ -/* MN103E010 On-board interrupt controller numbers - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_IRQ_H -#define _ASM_PROC_IRQ_H - -#ifdef __KERNEL__ - -#define GxICR_NUM_IRQS 42 - -#define GxICR_NUM_XIRQS 8 - -#define XIRQ0 34 -#define XIRQ1 35 -#define XIRQ2 36 -#define XIRQ3 37 -#define XIRQ4 38 -#define XIRQ5 39 -#define XIRQ6 40 -#define XIRQ7 41 - -#define XIRQ2IRQ(num) (XIRQ0 + num) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PROC_IRQ_H */ diff --git a/arch/mn10300/include/asm/proc-mn103e010/proc.h b/arch/mn10300/include/asm/proc-mn103e010/proc.h deleted file mode 100644 index 22a2b93..0000000 --- a/arch/mn10300/include/asm/proc-mn103e010/proc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* MN103E010 Processor description - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PROC_PROC_H -#define _ASM_PROC_PROC_H - -#define PROCESSOR_VENDOR_NAME "Matsushita" -#define PROCESSOR_MODEL_NAME "mn103e010" - -#endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h index 99785a9..a29445c 100644 --- a/arch/mn10300/include/asm/serial.h +++ b/arch/mn10300/include/asm/serial.h @@ -33,4 +33,4 @@ #define RS_TABLE_SIZE #endif -#include +#include diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h index 3944277..8d031f9 100644 --- a/arch/mn10300/include/asm/timex.h +++ b/arch/mn10300/include/asm/timex.h @@ -12,7 +12,7 @@ #define _ASM_TIMEX_H #include -#include +#include #define TICK_SIZE (tick_nsec / 1000) diff --git a/arch/mn10300/include/asm/unit-asb2303/clock.h b/arch/mn10300/include/asm/unit-asb2303/clock.h deleted file mode 100644 index 8b450e9..0000000 --- a/arch/mn10300/include/asm/unit-asb2303/clock.h +++ /dev/null @@ -1,45 +0,0 @@ -/* ASB2303-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_CLOCK_H -#define _ASM_UNIT_CLOCK_H - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ - -#else /* !CONFIG_MN10300_RTC */ - -#define MN10300_IOCLK 33333333UL -/* #define MN10300_IOBCLK 66666666UL */ - -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/include/asm/unit-asb2303/leds.h b/arch/mn10300/include/asm/unit-asb2303/leds.h deleted file mode 100644 index 3a7543e..0000000 --- a/arch/mn10300/include/asm/unit-asb2303/leds.h +++ /dev/null @@ -1,43 +0,0 @@ -/* ASB2303-specific LEDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_LEDS_H -#define _ASM_UNIT_LEDS_H - -#include -#include -#include - -#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32) -#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32) - -/* - * use the 7-segment LEDs to indicate states - */ - -/* flip the 7-segment LEDs between "G" and "-" */ -#define mn10300_set_gdbleds(ONOFF) \ -do { \ - ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \ -} while (0) - -/* indicate double-fault by displaying "d" on the LEDs */ -#define mn10300_set_dbfleds \ - mov 0x43,d0 ; \ - movbu d0,(ASB2303_7SEGLEDS) - -#ifndef __ASSEMBLY__ -extern void peripheral_leds_display_exception(enum exception_code code); -extern void peripheral_leds_led_chase(void); -extern void debug_to_serial(const char *p, int n); -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/include/asm/unit-asb2303/serial.h b/arch/mn10300/include/asm/unit-asb2303/serial.h deleted file mode 100644 index 0d55cf5..0000000 --- a/arch/mn10300/include/asm/unit-asb2303/serial.h +++ /dev/null @@ -1,136 +0,0 @@ -/* ASB2303-specific 8250 serial ports - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include -#include -#include - -#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 -#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000 - -#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ - -/* - * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ -#endif - -#ifndef __ASSEMBLY__ - -#define LSR_WAIT_FOR(STATE) \ -do { \ - while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \ -} while (0) -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \ -} while (0) -#define FLOWCTL_CLEAR(LINE) \ -do { \ - GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_SET(LINE) \ -do { \ - GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - GDBPORT_SERIAL_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - GDBPORT_SERIAL_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/include/asm/unit-asb2303/smc91111.h b/arch/mn10300/include/asm/unit-asb2303/smc91111.h deleted file mode 100644 index dd456e9..0000000 --- a/arch/mn10300/include/asm/unit-asb2303/smc91111.h +++ /dev/null @@ -1,50 +0,0 @@ -/* Support for the SMC91C111 NIC on an ASB2303 - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SMC91111_H -#define _ASM_UNIT_SMC91111_H - -#include - -#define SMC91111_BASE 0xAA000300UL -#define SMC91111_BASE_END 0xAA000400UL -#define SMC91111_IRQ XIRQ3 - -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_NOWAIT 1 -#define SMC_IRQ_FLAGS (0) - -#if SMC_CAN_USE_8BIT -#define SMC_inb(a, r) inb((unsigned long) ((a) + (r))) -#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r))) -#endif - -#if SMC_CAN_USE_16BIT -#define SMC_inw(a, r) inw((unsigned long) ((a) + (r))) -#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r))) -#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l)) -#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l)) -#endif - -#if SMC_CAN_USE_32BIT -#define SMC_inl(a, r) inl((unsigned long) ((a) + (r))) -#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r))) -#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l)) -#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l)) -#endif - -#define RPC_LSA_DEFAULT RPC_LED_100_10 -#define RPC_LSB_DEFAULT RPC_LED_TX_RX - -#define set_irq_type(irq, type) - -#endif /* _ASM_UNIT_SMC91111_H */ diff --git a/arch/mn10300/include/asm/unit-asb2303/timex.h b/arch/mn10300/include/asm/unit-asb2303/timex.h deleted file mode 100644 index 7e54b0c..0000000 --- a/arch/mn10300/include/asm/unit-asb2303/timex.h +++ /dev/null @@ -1,135 +0,0 @@ -/* ASB2303-specific timer specifcations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_TIMEX_H -#define _ASM_UNIT_TIMEX_H - -#ifndef __ASSEMBLY__ -#include -#endif /* __ASSEMBLY__ */ - -#include -#include - -/* - * jiffies counter specifications - */ - -#define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR -#define TMJCIRQ TM1IRQ -#define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 - -#ifndef __ASSEMBLY__ - -static inline void startup_jiffies_counter(void) -{ - unsigned rate; - u16 md, t16; - - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - if (rate > TMJCBR_MAX) - BUG(); - } - } - - TMJCBR = rate - 1; - t16 = TMJCBR; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; - - t16 = TMJCMD; - - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} - -static inline void shutdown_jiffies_counter(void) -{ -} - -#endif /* !__ASSEMBLY__ */ - - -/* - * timestamp counter specifications - */ - -#define TMTSCBR_MAX 0xffffffff -#define TMTSCBC TM45BC - -#ifndef __ASSEMBLY__ - -static inline void startup_timestamp_counter(void) -{ - /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time - * - count down from 4Gig-1 to 0 and wrap at IOCLK rate - */ - TM45BR = TMTSCBR_MAX; - - TM4MD = TM4MD_SRC_IOCLK; - TM4MD |= TM4MD_INIT_COUNTER; - TM4MD &= ~TM4MD_INIT_COUNTER; - TM4ICR = 0; - - TM5MD = TM5MD_SRC_TM4CASCADE; - TM5MD |= TM5MD_INIT_COUNTER; - TM5MD &= ~TM5MD_INIT_COUNTER; - TM5ICR = 0; - - TM5MD |= TM5MD_COUNT_ENABLE; - TM4MD |= TM4MD_COUNT_ENABLE; -} - -static inline void shutdown_timestamp_counter(void) -{ - TM4MD = 0; - TM5MD = 0; -} - -/* - * we use a cascaded pair of 16-bit down-counting timers to count I/O - * clock cycles for the purposes of time keeping - */ -typedef unsigned long cycles_t; - -static inline cycles_t read_timestamp_counter(void) -{ - return (cycles_t)TMTSCBC; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/include/asm/unit-asb2305/clock.h b/arch/mn10300/include/asm/unit-asb2305/clock.h deleted file mode 100644 index 7d51484..0000000 --- a/arch/mn10300/include/asm/unit-asb2305/clock.h +++ /dev/null @@ -1,45 +0,0 @@ -/* ASB2305-specific clocks - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_CLOCK_H -#define _ASM_UNIT_CLOCK_H - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ - -#else /* !CONFIG_MN10300_RTC */ - -#define MN10300_IOCLK 33333333UL -/* #define MN10300_IOBCLK 66666666UL */ - -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/include/asm/unit-asb2305/leds.h b/arch/mn10300/include/asm/unit-asb2305/leds.h deleted file mode 100644 index bc471f6..0000000 --- a/arch/mn10300/include/asm/unit-asb2305/leds.h +++ /dev/null @@ -1,51 +0,0 @@ -/* ASB2305-specific LEDs - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_LEDS_H -#define _ASM_UNIT_LEDS_H - -#include -#include -#include - -#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32) - -/* perform a hard reset by driving PIO06 low */ -#define mn10300_unit_hard_reset() \ -do { \ - P0OUT &= 0xbf; \ - P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \ -} while (0) - -/* - * use the 7-segment LEDs to indicate states - */ -/* indicate double-fault by displaying "db-f" on the LEDs */ -#define mn10300_set_dbfleds \ - mov 0x43077f1d,d0 ; \ - mov d0,(ASB2305_7SEGLEDS) - -/* flip the 7-segment LEDs between "Gdb-" and "----" */ -#define mn10300_set_gdbleds(ONOFF) \ -do { \ - ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ -} while (0) - -#ifndef __ASSEMBLY__ -extern void peripheral_leds_display_exception(enum exception_code); -extern void peripheral_leds_led_chase(void); -extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int); -extern void peripheral_leds7x4_display_rtc(void); -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/include/asm/unit-asb2305/serial.h b/arch/mn10300/include/asm/unit-asb2305/serial.h deleted file mode 100644 index 73d31d6..0000000 --- a/arch/mn10300/include/asm/unit-asb2305/serial.h +++ /dev/null @@ -1,120 +0,0 @@ -/* ASB2305-specific 8250 serial ports - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include -#include -#include - -#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 -#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) - -#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ - -/* - * dispose of the /dev/ttyS0 serial port - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#error The ASB2305 doesnt have a /dev/ttyS1 -#endif - -#ifndef __ASSEMBLY__ - -#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) - -#define LSR_WAIT_FOR(STATE) \ -do { \ - while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ -} while (0) -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ -} while (0) -#define FLOWCTL_CLEAR(LINE) \ -do { \ - TTYS0_MCR &= ~UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_SET(LINE) \ -do { \ - TTYS0_MCR |= UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - TTYS0_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - TTYS0_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/include/asm/unit-asb2305/timex.h b/arch/mn10300/include/asm/unit-asb2305/timex.h deleted file mode 100644 index 10e1bfe..0000000 --- a/arch/mn10300/include/asm/unit-asb2305/timex.h +++ /dev/null @@ -1,135 +0,0 @@ -/* ASB2305 timer specifcations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_TIMEX_H -#define _ASM_UNIT_TIMEX_H - -#ifndef __ASSEMBLY__ -#include -#endif /* __ASSEMBLY__ */ - -#include -#include - -/* - * jiffies counter specifications - */ - -#define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR -#define TMJCIRQ TM1IRQ -#define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 - -#ifndef __ASSEMBLY__ - -static inline void startup_jiffies_counter(void) -{ - unsigned rate; - u16 md, t16; - - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - if (rate > TMJCBR_MAX) - BUG(); - } - } - - TMJCBR = rate - 1; - t16 = TMJCBR; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; - - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; - - t16 = TMJCMD; - - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} - -static inline void shutdown_jiffies_counter(void) -{ -} - -#endif /* !__ASSEMBLY__ */ - - -/* - * timestamp counter specifications - */ - -#define TMTSCBR_MAX 0xffffffff -#define TMTSCBC TM45BC - -#ifndef __ASSEMBLY__ - -static inline void startup_timestamp_counter(void) -{ - /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time - * - count down from 4Gig-1 to 0 and wrap at IOCLK rate - */ - TM45BR = TMTSCBR_MAX; - - TM4MD = TM4MD_SRC_IOCLK; - TM4MD |= TM4MD_INIT_COUNTER; - TM4MD &= ~TM4MD_INIT_COUNTER; - TM4ICR = 0; - - TM5MD = TM5MD_SRC_TM4CASCADE; - TM5MD |= TM5MD_INIT_COUNTER; - TM5MD &= ~TM5MD_INIT_COUNTER; - TM5ICR = 0; - - TM5MD |= TM5MD_COUNT_ENABLE; - TM4MD |= TM4MD_COUNT_ENABLE; -} - -static inline void shutdown_timestamp_counter(void) -{ - TM4MD = 0; - TM5MD = 0; -} - -/* - * we use a cascaded pair of 16-bit down-counting timers to count I/O - * clock cycles for the purposes of time keeping - */ -typedef unsigned long cycles_t; - -static inline cycles_t read_timestamp_counter(void) -{ - return (cycles_t) TMTSCBC; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index ceeaaaa..34ab5a2 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S index c68dcd0..4998b24f 100644 --- a/arch/mn10300/kernel/gdb-io-serial-low.S +++ b/arch/mn10300/kernel/gdb-io-serial-low.S @@ -18,7 +18,7 @@ #include #include #include -#include +#include .text diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c index 11584c5..ae663dc 100644 --- a/arch/mn10300/kernel/gdb-io-serial.c +++ b/arch/mn10300/kernel/gdb-io-serial.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include /* * initialise the GDB stub diff --git a/arch/mn10300/kernel/gdb-io-ttysm-low.S b/arch/mn10300/kernel/gdb-io-ttysm-low.S index 677c787..060b7cc 100644 --- a/arch/mn10300/kernel/gdb-io-ttysm-low.S +++ b/arch/mn10300/kernel/gdb-io-ttysm-low.S @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include "mn10300-serial.h" .text diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c index e94c25e..a560bbc 100644 --- a/arch/mn10300/kernel/gdb-io-ttysm.c +++ b/arch/mn10300/kernel/gdb-io-ttysm.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include "mn10300-serial.h" #if defined(CONFIG_GDBSTUB_ON_TTYSM0) diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index 0ea7482..41b1170 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -136,8 +136,8 @@ #include #include #include -#include -#include +#include +#include /* define to use F7F7 rather than FF which is subverted by JTAG debugger */ #undef GDBSTUB_USE_F7F7_AS_BREAKPOINT diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index 606bd8c6..8a8309f 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -17,7 +17,7 @@ #include #include #include -#include +#include .section .text.head,"ax" diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S index ef3f4c1..2244853 100644 --- a/arch/mn10300/kernel/mn10300-serial-low.S +++ b/arch/mn10300/kernel/mn10300-serial-low.S @@ -18,8 +18,8 @@ #include #include #include -#include -#include +#include +#include #include "mn10300-serial.h" #define SCxCTR 0x00 diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index 59b9c4b..2fd5966 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -41,7 +41,7 @@ static const char serial_revdate[] = "2007-11-06"; #include #include #include -#include +#include #include "mn10300-serial.h" static inline __attribute__((format(printf, 1, 2))) diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c index 2e370d8..f362d9d 100644 --- a/arch/mn10300/kernel/mn10300-watchdog.c +++ b/arch/mn10300/kernel/mn10300-watchdog.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include static DEFINE_SPINLOCK(watchdog_print_lock); static unsigned int watchdog; diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index e1d88ab..71414e1 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index fcb9a03..681ad8c 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/mn10300/proc-mn103e010/include/proc/cache.h b/arch/mn10300/proc-mn103e010/include/proc/cache.h new file mode 100644 index 0000000..bdc1f9a --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/cache.h @@ -0,0 +1,33 @@ +/* MN103E010 Cache specification + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CACHE_H +#define _ASM_PROC_CACHE_H + +/* L1 cache */ + +#define L1_CACHE_NWAYS 4 /* number of ways in caches */ +#define L1_CACHE_NENTRIES 256 /* number of entries in each way */ +#define L1_CACHE_BYTES 16 /* bytes per entry */ +#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */ +#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */ + +#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ +#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ +#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */ +#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ + +/* + * specification of the interval between interrupt checking intervals whilst + * managing the cache with the interrupts disabled + */ +#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 + +#endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/clock.h b/arch/mn10300/proc-mn103e010/include/proc/clock.h new file mode 100644 index 0000000..aa23e14 --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/clock.h @@ -0,0 +1,18 @@ +/* MN103E010-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CLOCK_H +#define _ASM_PROC_CLOCK_H + +#include + +#define MN10300_WDCLK MN10300_IOCLK + +#endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/irq.h b/arch/mn10300/proc-mn103e010/include/proc/irq.h new file mode 100644 index 0000000..aa6ee8f --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/irq.h @@ -0,0 +1,34 @@ +/* MN103E010 On-board interrupt controller numbers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_IRQ_H +#define _ASM_PROC_IRQ_H + +#ifdef __KERNEL__ + +#define GxICR_NUM_IRQS 42 + +#define GxICR_NUM_XIRQS 8 + +#define XIRQ0 34 +#define XIRQ1 35 +#define XIRQ2 36 +#define XIRQ3 37 +#define XIRQ4 38 +#define XIRQ5 39 +#define XIRQ6 40 +#define XIRQ7 41 + +#define XIRQ2IRQ(num) (XIRQ0 + num) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PROC_IRQ_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/proc.h b/arch/mn10300/proc-mn103e010/include/proc/proc.h new file mode 100644 index 0000000..22a2b93 --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/proc.h @@ -0,0 +1,18 @@ +/* MN103E010 Processor description + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_PROC_H +#define _ASM_PROC_PROC_H + +#define PROCESSOR_VENDOR_NAME "Matsushita" +#define PROCESSOR_MODEL_NAME "mn103e010" + +#endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h new file mode 100644 index 0000000..8b450e9 --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/clock.h @@ -0,0 +1,45 @@ +/* ASB2303-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MN10300_RTC + +extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ +extern unsigned long mn10300_iobclk; +extern unsigned long mn10300_tsc_per_HZ; + +#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +/* If this processors has a another clock, uncomment the below. */ +/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ + +#else /* !CONFIG_MN10300_RTC */ + +#define MN10300_IOCLK 33333333UL +/* #define MN10300_IOBCLK 66666666UL */ + +#endif /* !CONFIG_MN10300_RTC */ + +#define MN10300_JCCLK MN10300_IOCLK +#define MN10300_TSCCLK MN10300_IOCLK + +#ifdef CONFIG_MN10300_RTC +#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#else /* !CONFIG_MN10300_RTC */ +#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) +#endif /* !CONFIG_MN10300_RTC */ + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/leds.h b/arch/mn10300/unit-asb2303/include/unit/leds.h new file mode 100644 index 0000000..3a7543e --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/leds.h @@ -0,0 +1,43 @@ +/* ASB2303-specific LEDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include +#include +#include + +#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32) +#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32) + +/* + * use the 7-segment LEDs to indicate states + */ + +/* flip the 7-segment LEDs between "G" and "-" */ +#define mn10300_set_gdbleds(ONOFF) \ +do { \ + ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \ +} while (0) + +/* indicate double-fault by displaying "d" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43,d0 ; \ + movbu d0,(ASB2303_7SEGLEDS) + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code code); +extern void peripheral_leds_led_chase(void); +extern void debug_to_serial(const char *p, int n); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/serial.h b/arch/mn10300/unit-asb2303/include/unit/serial.h new file mode 100644 index 0000000..047566c --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/serial.h @@ -0,0 +1,136 @@ +/* ASB2303-specific 8250 serial ports + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include +#include +#include + +#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 +#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000 + +#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ + +/* + * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ +#endif + +#ifndef __ASSEMBLY__ + +#define LSR_WAIT_FOR(STATE) \ +do { \ + while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \ +} while (0) +#define FLOWCTL_WAIT_FOR(LINE) \ +do { \ + while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \ +} while (0) +#define FLOWCTL_CLEAR(LINE) \ +do { \ + GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_SET(LINE) \ +do { \ + GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + GDBPORT_SERIAL_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + GDBPORT_SERIAL_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/smc91111.h b/arch/mn10300/unit-asb2303/include/unit/smc91111.h new file mode 100644 index 0000000..dd456e9 --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/smc91111.h @@ -0,0 +1,50 @@ +/* Support for the SMC91C111 NIC on an ASB2303 + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SMC91111_H +#define _ASM_UNIT_SMC91111_H + +#include + +#define SMC91111_BASE 0xAA000300UL +#define SMC91111_BASE_END 0xAA000400UL +#define SMC91111_IRQ XIRQ3 + +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_NOWAIT 1 +#define SMC_IRQ_FLAGS (0) + +#if SMC_CAN_USE_8BIT +#define SMC_inb(a, r) inb((unsigned long) ((a) + (r))) +#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r))) +#endif + +#if SMC_CAN_USE_16BIT +#define SMC_inw(a, r) inw((unsigned long) ((a) + (r))) +#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r))) +#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l)) +#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l)) +#endif + +#if SMC_CAN_USE_32BIT +#define SMC_inl(a, r) inl((unsigned long) ((a) + (r))) +#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r))) +#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l)) +#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l)) +#endif + +#define RPC_LSA_DEFAULT RPC_LED_100_10 +#define RPC_LSB_DEFAULT RPC_LED_TX_RX + +#define set_irq_type(irq, type) + +#endif /* _ASM_UNIT_SMC91111_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h new file mode 100644 index 0000000..f206b63 --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -0,0 +1,135 @@ +/* ASB2303-specific timer specifcations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include +#endif /* __ASSEMBLY__ */ + +#include +#include + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffff +#define TMJCBC TM01BC + +#define TMJCMD TM01MD +#define TMJCBR TM01BR +#define TMJCIRQ TM1IRQ +#define TMJCICR TM1ICR +#define TMJCICR_LEVEL GxICR_LEVEL_5 + +#ifndef __ASSEMBLY__ + +static inline void startup_jiffies_counter(void) +{ + unsigned rate; + u16 md, t16; + + /* use as little prescaling as possible to avoid losing accuracy */ + md = TM0MD_SRC_IOCLK; + rate = MN10300_JCCLK / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_8; + rate = MN10300_JCCLK / 8 / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_32; + rate = MN10300_JCCLK / 32 / HZ; + + if (rate > TMJCBR_MAX) + BUG(); + } + } + + TMJCBR = rate - 1; + t16 = TMJCBR; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_INIT_COUNTER | + TM1MD_INIT_COUNTER << 8; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_COUNT_ENABLE | + TM1MD_COUNT_ENABLE << 8; + + t16 = TMJCMD; + + TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + t16 = TMJCICR; +} + +static inline void shutdown_jiffies_counter(void) +{ +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCBC TM45BC + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time + * - count down from 4Gig-1 to 0 and wrap at IOCLK rate + */ + TM45BR = TMTSCBR_MAX; + + TM4MD = TM4MD_SRC_IOCLK; + TM4MD |= TM4MD_INIT_COUNTER; + TM4MD &= ~TM4MD_INIT_COUNTER; + TM4ICR = 0; + + TM5MD = TM5MD_SRC_TM4CASCADE; + TM5MD |= TM5MD_INIT_COUNTER; + TM5MD &= ~TM5MD_INIT_COUNTER; + TM5ICR = 0; + + TM5MD |= TM5MD_COUNT_ENABLE; + TM4MD |= TM4MD_COUNT_ENABLE; +} + +static inline void shutdown_timestamp_counter(void) +{ + TM4MD = 0; + TM5MD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t)TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2303/leds.c b/arch/mn10300/unit-asb2303/leds.c index cd4bc78..c038393 100644 --- a/arch/mn10300/unit-asb2303/leds.c +++ b/arch/mn10300/unit-asb2303/leds.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #if 0 static const u8 asb2303_led_hex_tbl[16] = { diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c index 30875dd..43c2464 100644 --- a/arch/mn10300/unit-asb2303/smc91111.c +++ b/arch/mn10300/unit-asb2303/smc91111.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include static struct resource smc91c111_resources[] = { [0] = { diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h new file mode 100644 index 0000000..7d51484 --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/clock.h @@ -0,0 +1,45 @@ +/* ASB2305-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MN10300_RTC + +extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ +extern unsigned long mn10300_iobclk; +extern unsigned long mn10300_tsc_per_HZ; + +#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +/* If this processors has a another clock, uncomment the below. */ +/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ + +#else /* !CONFIG_MN10300_RTC */ + +#define MN10300_IOCLK 33333333UL +/* #define MN10300_IOBCLK 66666666UL */ + +#endif /* !CONFIG_MN10300_RTC */ + +#define MN10300_JCCLK MN10300_IOCLK +#define MN10300_TSCCLK MN10300_IOCLK + +#ifdef CONFIG_MN10300_RTC +#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#else /* !CONFIG_MN10300_RTC */ +#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) +#endif /* !CONFIG_MN10300_RTC */ + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/leds.h b/arch/mn10300/unit-asb2305/include/unit/leds.h new file mode 100644 index 0000000..bc471f6 --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/leds.h @@ -0,0 +1,51 @@ +/* ASB2305-specific LEDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include +#include +#include + +#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32) + +/* perform a hard reset by driving PIO06 low */ +#define mn10300_unit_hard_reset() \ +do { \ + P0OUT &= 0xbf; \ + P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \ +} while (0) + +/* + * use the 7-segment LEDs to indicate states + */ +/* indicate double-fault by displaying "db-f" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43077f1d,d0 ; \ + mov d0,(ASB2305_7SEGLEDS) + +/* flip the 7-segment LEDs between "Gdb-" and "----" */ +#define mn10300_set_gdbleds(ONOFF) \ +do { \ + ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ +} while (0) + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code); +extern void peripheral_leds_led_chase(void); +extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_rtc(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h new file mode 100644 index 0000000..3bfc9093 --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/serial.h @@ -0,0 +1,120 @@ +/* ASB2305-specific 8250 serial ports + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include +#include +#include + +#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 +#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) + +#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ + +/* + * dispose of the /dev/ttyS0 serial port + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2305 doesnt have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) + +#define LSR_WAIT_FOR(STATE) \ +do { \ + while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ +} while (0) +#define FLOWCTL_WAIT_FOR(LINE) \ +do { \ + while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ +} while (0) +#define FLOWCTL_CLEAR(LINE) \ +do { \ + TTYS0_MCR &= ~UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_SET(LINE) \ +do { \ + TTYS0_MCR |= UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + TTYS0_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + TTYS0_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h new file mode 100644 index 0000000..a71c49a --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -0,0 +1,135 @@ +/* ASB2305 timer specifcations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include +#endif /* __ASSEMBLY__ */ + +#include +#include + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffff +#define TMJCBC TM01BC + +#define TMJCMD TM01MD +#define TMJCBR TM01BR +#define TMJCIRQ TM1IRQ +#define TMJCICR TM1ICR +#define TMJCICR_LEVEL GxICR_LEVEL_5 + +#ifndef __ASSEMBLY__ + +static inline void startup_jiffies_counter(void) +{ + unsigned rate; + u16 md, t16; + + /* use as little prescaling as possible to avoid losing accuracy */ + md = TM0MD_SRC_IOCLK; + rate = MN10300_JCCLK / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_8; + rate = MN10300_JCCLK / 8 / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_32; + rate = MN10300_JCCLK / 32 / HZ; + + if (rate > TMJCBR_MAX) + BUG(); + } + } + + TMJCBR = rate - 1; + t16 = TMJCBR; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_INIT_COUNTER | + TM1MD_INIT_COUNTER << 8; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_COUNT_ENABLE | + TM1MD_COUNT_ENABLE << 8; + + t16 = TMJCMD; + + TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + t16 = TMJCICR; +} + +static inline void shutdown_jiffies_counter(void) +{ +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCBC TM45BC + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time + * - count down from 4Gig-1 to 0 and wrap at IOCLK rate + */ + TM45BR = TMTSCBR_MAX; + + TM4MD = TM4MD_SRC_IOCLK; + TM4MD |= TM4MD_INIT_COUNTER; + TM4MD &= ~TM4MD_INIT_COUNTER; + TM4ICR = 0; + + TM5MD = TM5MD_SRC_TM4CASCADE; + TM5MD |= TM5MD_INIT_COUNTER; + TM5MD &= ~TM5MD_INIT_COUNTER; + TM5ICR = 0; + + TM5MD |= TM5MD_COUNT_ENABLE; + TM4MD |= TM4MD_COUNT_ENABLE; +} + +static inline void shutdown_timestamp_counter(void) +{ + TM4MD = 0; + TM5MD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t) TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c index e99dcc9..d345ff9 100644 --- a/arch/mn10300/unit-asb2305/leds.c +++ b/arch/mn10300/unit-asb2305/leds.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include static const u8 asb2305_led_hex_tbl[16] = { 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index 72812a9..1c452cc 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include /* * initialise some of the unit hardware before gdbstub is set up diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 912308e..329f890 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -369,7 +369,7 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, * MN10300/AM33 configuration */ -#include +#include #else -- cgit v0.10.2 From 8f7c2c37319a81ef4c2bfdec67b1ccd5744d97e4 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Wed, 8 Apr 2009 16:58:57 +0800 Subject: Make __stringify support variable argument macros too For example: __stringify(__entry->irq, __entry->ret) will now convert it to: "REC->irq, REC->ret" It also still supports single arguments as the old macro did. Signed-off-by: Zhao Lei Acked-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49DC6751.30308@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/include/linux/stringify.h b/include/linux/stringify.h index 0b43883..841cec8 100644 --- a/include/linux/stringify.h +++ b/include/linux/stringify.h @@ -6,7 +6,7 @@ * converts to "bar". */ -#define __stringify_1(x) #x -#define __stringify(x) __stringify_1(x) +#define __stringify_1(x...) #x +#define __stringify(x...) __stringify_1(x) #endif /* !__LINUX_STRINGIFY_H */ -- cgit v0.10.2 From 0462b5664b2bda5a18fef7efb5bb32ce36590c1a Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Wed, 8 Apr 2009 17:00:13 +0800 Subject: ftrace: Output REC->var instead of __entry->var for trace format print fmt: "irq=%d return=%s", __entry->irq, __entry->ret ? \"handled\" : \"unhandled\" "__entry" should be convert to "REC" by __stringify() macro. Signed-off-by: Zhao Lei Acked-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49DC679D.2090901@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_events_stage_2.h b/kernel/trace/trace_events_stage_2.h index 30743f7..d363c66 100644 --- a/kernel/trace/trace_events_stage_2.h +++ b/kernel/trace/trace_events_stage_2.h @@ -105,10 +105,10 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags) \ return 0; #undef __entry -#define __entry "REC" +#define __entry REC #undef TP_printk -#define TP_printk(fmt, args...) "%s, %s\n", #fmt, #args +#define TP_printk(fmt, args...) "%s, %s\n", #fmt, __stringify(args) #undef TP_fast_assign #define TP_fast_assign(args...) args -- cgit v0.10.2 From 9b987aeb4a7bc42a3eb8361030b820b0263c31f1 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 9 Apr 2009 10:55:33 -0700 Subject: x86: fix set_fixmap to use phys_addr_t Impact: fix kprobes crash on 32-bit with RAM above 4G Use phys_addr_t for receiving a physical address argument instead of unsigned long. This allows fixmap to handle pages higher than 4GB on x86-32. Signed-off-by: Masami Hiramatsu Acked-by: Mathieu Desnoyers Cc: Andrew Morton Cc: Ananth N Mavinakayanahalli Cc: systemtap-ml Cc: Gary Hade Cc: Linus Torvalds LKML-Reference: <49DE3695.6040800@redhat.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 81937a5..2d81af3 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -151,11 +151,11 @@ extern pte_t *pkmap_page_table; void __native_set_fixmap(enum fixed_addresses idx, pte_t pte); void native_set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags); + phys_addr_t phys, pgprot_t flags); #ifndef CONFIG_PARAVIRT static inline void __set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags) + phys_addr_t phys, pgprot_t flags) { native_set_fixmap(idx, phys, flags); } diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index e5383e3..7373932 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -193,8 +193,10 @@ extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size); */ extern void early_ioremap_init(void); extern void early_ioremap_reset(void); -extern void __iomem *early_ioremap(unsigned long offset, unsigned long size); -extern void __iomem *early_memremap(unsigned long offset, unsigned long size); +extern void __iomem *early_ioremap(resource_size_t phys_addr, + unsigned long size); +extern void __iomem *early_memremap(resource_size_t phys_addr, + unsigned long size); extern void early_iounmap(void __iomem *addr, unsigned long size); #define IO_SPACE_LIMIT 0xffff diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 7727aa8..378e369 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -347,7 +347,7 @@ struct pv_mmu_ops { /* Sometimes the physical address is a pfn, and sometimes its an mfn. We can tell which is which from the index. */ void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx, - unsigned long phys, pgprot_t flags); + phys_addr_t phys, pgprot_t flags); }; struct raw_spinlock; @@ -1432,7 +1432,7 @@ static inline void arch_leave_lazy_mmu_mode(void) void arch_flush_lazy_mmu_mode(void); static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx, - unsigned long phys, pgprot_t flags) + phys_addr_t phys, pgprot_t flags) { pv_mmu_ops.set_fixmap(idx, phys, flags); } diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 0dfa09d..09daebf 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -547,7 +547,7 @@ void __init early_ioremap_reset(void) } static void __init __early_set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags) + phys_addr_t phys, pgprot_t flags) { unsigned long addr = __fix_to_virt(idx); pte_t *pte; @@ -566,7 +566,7 @@ static void __init __early_set_fixmap(enum fixed_addresses idx, } static inline void __init early_set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t prot) + phys_addr_t phys, pgprot_t prot) { if (after_paging_init) __set_fixmap(idx, phys, prot); @@ -607,9 +607,10 @@ static int __init check_early_ioremap_leak(void) late_initcall(check_early_ioremap_leak); static void __init __iomem * -__early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot) +__early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot) { - unsigned long offset, last_addr; + unsigned long offset; + resource_size_t last_addr; unsigned int nrpages; enum fixed_addresses idx0, idx; int i, slot; @@ -625,15 +626,15 @@ __early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot) } if (slot < 0) { - printk(KERN_INFO "early_iomap(%08lx, %08lx) not found slot\n", - phys_addr, size); + printk(KERN_INFO "early_iomap(%08llx, %08lx) not found slot\n", + (u64)phys_addr, size); WARN_ON(1); return NULL; } if (early_ioremap_debug) { - printk(KERN_INFO "early_ioremap(%08lx, %08lx) [%d] => ", - phys_addr, size, slot); + printk(KERN_INFO "early_ioremap(%08llx, %08lx) [%d] => ", + (u64)phys_addr, size, slot); dump_stack(); } @@ -680,13 +681,15 @@ __early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot) } /* Remap an IO device */ -void __init __iomem *early_ioremap(unsigned long phys_addr, unsigned long size) +void __init __iomem * +early_ioremap(resource_size_t phys_addr, unsigned long size) { return __early_ioremap(phys_addr, size, PAGE_KERNEL_IO); } /* Remap memory */ -void __init __iomem *early_memremap(unsigned long phys_addr, unsigned long size) +void __init __iomem * +early_memremap(resource_size_t phys_addr, unsigned long size) { return __early_ioremap(phys_addr, size, PAGE_KERNEL); } diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 5b7c7c8..7aa03a5 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -345,7 +345,8 @@ void __native_set_fixmap(enum fixed_addresses idx, pte_t pte) fixmaps_set++; } -void native_set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags) +void native_set_fixmap(enum fixed_addresses idx, phys_addr_t phys, + pgprot_t flags) { __native_set_fixmap(idx, pfn_pte(phys >> PAGE_SHIFT, flags)); } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index db3802f..2a81838 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1750,7 +1750,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, } #endif /* CONFIG_X86_64 */ -static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot) +static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) { pte_t pte; -- cgit v0.10.2 From 066123a535927b3f17cac2305258cc71abdb0d92 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Apr 2009 12:02:40 -0700 Subject: percpu: unbreak alpha percpu For the time being, move the generic percpu_*() accessors to linux/percpu.h. asm-generic/percpu.h is meant to carry generic stuff for low level stuff - declarations, definitions and pointer offset calculation and so on but not for generic interface. Signed-off-by: Ingo Molnar diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index 00f45ff..b0e63c6 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -80,56 +80,4 @@ extern void setup_per_cpu_areas(void); #define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \ __typeof__(type) per_cpu_var(name) -/* - * Optional methods for optimized non-lvalue per-cpu variable access. - * - * @var can be a percpu variable or a field of it and its size should - * equal char, int or long. percpu_read() evaluates to a lvalue and - * all others to void. - * - * These operations are guaranteed to be atomic w.r.t. preemption. - * The generic versions use plain get/put_cpu_var(). Archs are - * encouraged to implement single-instruction alternatives which don't - * require preemption protection. - */ -#ifndef percpu_read -# define percpu_read(var) \ - ({ \ - typeof(per_cpu_var(var)) __tmp_var__; \ - __tmp_var__ = get_cpu_var(var); \ - put_cpu_var(var); \ - __tmp_var__; \ - }) -#endif - -#define __percpu_generic_to_op(var, val, op) \ -do { \ - get_cpu_var(var) op val; \ - put_cpu_var(var); \ -} while (0) - -#ifndef percpu_write -# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =) -#endif - -#ifndef percpu_add -# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=) -#endif - -#ifndef percpu_sub -# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=) -#endif - -#ifndef percpu_and -# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=) -#endif - -#ifndef percpu_or -# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=) -#endif - -#ifndef percpu_xor -# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=) -#endif - #endif /* _ASM_GENERIC_PERCPU_H_ */ diff --git a/include/linux/percpu.h b/include/linux/percpu.h index ee5615d..cfda2d5 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -168,4 +168,56 @@ static inline void free_percpu(void *p) #define alloc_percpu(type) (type *)__alloc_percpu(sizeof(type), \ __alignof__(type)) +/* + * Optional methods for optimized non-lvalue per-cpu variable access. + * + * @var can be a percpu variable or a field of it and its size should + * equal char, int or long. percpu_read() evaluates to a lvalue and + * all others to void. + * + * These operations are guaranteed to be atomic w.r.t. preemption. + * The generic versions use plain get/put_cpu_var(). Archs are + * encouraged to implement single-instruction alternatives which don't + * require preemption protection. + */ +#ifndef percpu_read +# define percpu_read(var) \ + ({ \ + typeof(per_cpu_var(var)) __tmp_var__; \ + __tmp_var__ = get_cpu_var(var); \ + put_cpu_var(var); \ + __tmp_var__; \ + }) +#endif + +#define __percpu_generic_to_op(var, val, op) \ +do { \ + get_cpu_var(var) op val; \ + put_cpu_var(var); \ +} while (0) + +#ifndef percpu_write +# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =) +#endif + +#ifndef percpu_add +# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=) +#endif + +#ifndef percpu_sub +# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=) +#endif + +#ifndef percpu_and +# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=) +#endif + +#ifndef percpu_or +# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=) +#endif + +#ifndef percpu_xor +# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=) +#endif + #endif /* __LINUX_PERCPU_H */ -- cgit v0.10.2 From cb7301c7a3b2216c93b148fec0718d24f4ee2a99 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 20:40:12 -0700 Subject: Add scripts/get_maintainer.pl A script to parse file pattern information in MAINTAINERS and return selected information about a file or patch usage: scripts/get_maintainer.pl [options] patchfile scripts/get_maintainer.pl [options] -f file version: 0.14 MAINTAINERS field selection options: --email => print email address(es) if any --git => include git "*-by:" signers in commit count order --git-chief-penguins => include (Linus Torvalds) --git-min-signatures => number of signatures required (default: 1) --git-max-maintainers => maximum maintainers to add (default: 5) --git-since => git history to use (default: 1-year-ago) --m => include maintainer(s) if any --n => include name 'Full Name ' --l => include list(s) if any --s => include subscriber only list(s) if any --scm => print SCM tree(s) if any --status => print status if any --subsystem => print subsystem name if any --web => print website(s) if any Output type options: --separator [, ] => separator for multiple entries on 1 line --multiline => print 1 entry per line Default options: [--email --git --m --n --l --multiline] Other options: --version => show version --help => show this help information Signed-off-by: Joe Perches Acked-by: Pavel Machek diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl new file mode 100755 index 0000000..0f3c0a5 --- /dev/null +++ b/scripts/get_maintainer.pl @@ -0,0 +1,518 @@ +#!/usr/bin/perl -w +# (c) 2007, Joe Perches +# created from checkpatch.pl +# +# Print selected MAINTAINERS information for +# the files modified in a patch or for a file +# +# usage: perl scripts/get_maintainers.pl [OPTIONS] +# perl scripts/get_maintainers.pl [OPTIONS] -f +# +# Licensed under the terms of the GNU GPL License version 2 + +use strict; + +my $P = $0; +my $V = '0.14'; + +use Getopt::Long qw(:config no_auto_abbrev); + +my $lk_path = "./"; +my $email = 1; +my $email_usename = 1; +my $email_maintainer = 1; +my $email_list = 1; +my $email_subscriber_list = 0; +my $email_git = 1; +my $email_git_penguin_chiefs = 0; +my $email_git_min_signatures = 1; +my $email_git_max_maintainers = 5; +my $email_git_since = "1-year-ago"; +my $output_multiline = 1; +my $output_separator = ", "; +my $scm = 0; +my $web = 0; +my $subsystem = 0; +my $status = 0; +my $onefile = 0; +my $version = 0; +my $help = 0; + +my $exit = 0; + +my @penguin_chief = (); +push(@penguin_chief,"Linus Torvalds:torvalds\@linux-foundation.org"); +#Andrew wants in on most everything - 2009/01/14 +#push(@penguin_chief,"Andrew Morton:akpm\@linux-foundation.org"); + +my @penguin_chief_names = (); +foreach my $chief (@penguin_chief) { + if ($chief =~ m/^(.*):(.*)/) { + my $chief_name = $1; + my $chief_addr = $2; + push(@penguin_chief_names, $chief_name); + } +} +my $penguin_chiefs = "\(" . join("|",@penguin_chief_names) . "\)"; + +if (!GetOptions( + 'email!' => \$email, + 'git!' => \$email_git, + 'git-chief-penguins!' => \$email_git_penguin_chiefs, + 'git-min-signatures=i' => \$email_git_min_signatures, + 'git-max-maintainers=i' => \$email_git_max_maintainers, + 'git-since=s' => \$email_git_since, + 'm!' => \$email_maintainer, + 'n!' => \$email_usename, + 'l!' => \$email_list, + 's!' => \$email_subscriber_list, + 'multiline!' => \$output_multiline, + 'separator=s' => \$output_separator, + 'subsystem!' => \$subsystem, + 'status!' => \$status, + 'scm!' => \$scm, + 'web!' => \$web, + 'f|file' => \$onefile, + 'v|version' => \$version, + 'h|help' => \$help, + )) { + usage(); + die "$P: invalid argument\n"; +} + +if ($help != 0) { + usage(); + exit 0; +} + +if ($version != 0) { + print("${P} ${V}\n"); + exit 0; +} + +my $infile = $ARGV[0]; + +if ($#ARGV < 0) { + usage(); + die "$P: argument missing: patchfile or -f file please\n"; +} + +my $selections = $email + $scm + $status + $subsystem + $web; +if ($selections == 0) { + usage(); + die "$P: Missing required option: email, scm, status, subsystem or web\n"; +} + +if ($email && ($email_maintainer + $email_list + $email_subscriber_list + + $email_git + $email_git_penguin_chiefs) == 0) { + usage(); + die "$P: Please select at least 1 email option\n"; +} + +if (!top_of_kernel_tree($lk_path)) { + die "$P: The current directory does not appear to be " + . "a linux kernel source tree.\n"; +} + +## Read MAINTAINERS for type/value pairs + +my @typevalue = (); +open(MAINT, "<${lk_path}MAINTAINERS") || die "$P: Can't open MAINTAINERS\n"; +while () { + my $line = $_; + + if ($line =~ m/^(\C):\s*(.*)/) { + my $type = $1; + my $value = $2; + + ##Filename pattern matching + if ($type eq "F" || $type eq "X") { + $value =~ s@\.@\\\.@g; ##Convert . to \. + $value =~ s/\*/\.\*/g; ##Convert * to .* + $value =~ s/\?/\./g; ##Convert ? to . + } + push(@typevalue, "$type:$value"); + } elsif (!/^(\s)*$/) { + $line =~ s/\n$//g; + push(@typevalue, $line); + } +} +close(MAINT); + +## use the filename on the command line or find the filenames in the patchfile + +my @files = (); + +if ($onefile) { + if (!(-f $infile)) { + die "$P: file '${infile}' not found\n"; + } + push(@files, $infile); +} else { + open(PATCH, "<$infile") or die "$P: Can't open ${infile}\n"; + while () { + if (m/^\+\+\+\s+(\S+)/) { + my $file = $1; + $file =~ s@^[^/]*/@@; + $file =~ s@\n@@; + push(@files, $file); + } + } + close(PATCH); + my $file_cnt = @files; + if ($file_cnt == 0) { + print STDERR "$P: file '${infile}' doesn't appear to be a patch. " + . "Add -f to options?\n"; + } + @files = sort_and_uniq(@files); +} + +my @email_to = (); +my @scm = (); +my @web = (); +my @subsystem = (); +my @status = (); + +# Find responsible parties + +foreach my $file (@files) { + +#Do not match excluded file patterns + + my $exclude = 0; + foreach my $line (@typevalue) { + if ($line =~ m/^(\C):(.*)/) { + my $type = $1; + my $value = $2; + if ($type eq 'X') { + if (file_match_pattern($file, $value)) { + $exclude = 1; + } + } + } + } + + if (!$exclude) { + my $tvi = 0; + foreach my $line (@typevalue) { + if ($line =~ m/^(\C):(.*)/) { + my $type = $1; + my $value = $2; + if ($type eq 'F') { + if (file_match_pattern($file, $value)) { + add_categories($tvi); + } + } + } + $tvi++; + } + } + + if ($email_git) { + recent_git_signoffs($file); + } + +} + +if ($email_git_penguin_chiefs) { + foreach my $chief (@penguin_chief) { + if ($chief =~ m/^(.*):(.*)/) { + my $chief_name = $1; + my $chief_addr = $2; + if ($email_usename) { + push(@email_to, format_email($chief_name, $chief_addr)); + } else { + push(@email_to, $chief_addr); + } + } + } +} + +if ($email) { + my $address_cnt = @email_to; + if ($address_cnt == 0 && $email_list) { + push(@email_to, "linux-kernel\@vger.kernel.org"); + } + +#Don't sort email address list, but do remove duplicates + @email_to = uniq(@email_to); + output(@email_to); +} + +if ($scm) { + if (!$onefile) { + @scm = sort_and_uniq(@scm); + } + output(@scm); +} + +if ($status) { + if (!$onefile) { + @status = sort_and_uniq(@status); + } + output(@status); +} + +if ($subsystem) { + if (!$onefile) { + @subsystem = sort_and_uniq(@subsystem); + } + output(@subsystem); +} + +if ($web) { + if (!$onefile) { + @web = sort_and_uniq(@web); + } + output(@web); +} + +exit($exit); + +sub file_match_pattern { + my ($file, $pattern) = @_; + if (substr($pattern, -1) eq "/") { + if ($file =~ m@^$pattern@) { + return 1; + } + } else { + if ($file =~ m@^$pattern@) { + my $s1 = ($file =~ tr@/@@); + my $s2 = ($pattern =~ tr@/@@); + if ($s1 == $s2) { + return 1; + } + } + } + return 0; +} + +sub usage { + print < print email address(es) if any + --git => include recent git \*-by: signers + --git-chief-penguins => include ${penguin_chiefs} + --git-min-signatures => number of signatures required (default: 1) + --git-max-maintainers => maximum maintainers to add (default: 5) + --git-since => git history to use (default: 1-year-ago) + --m => include maintainer(s) if any + --n => include name 'Full Name ' + --l => include list(s) if any + --s => include subscriber only list(s) if any + --scm => print SCM tree(s) if any + --status => print status if any + --subsystem => print subsystem name if any + --web => print website(s) if any + +Output type options: + --separator [, ] => separator for multiple entries on 1 line + --multiline => print 1 entry per line + +Default options: + [--email --git --m --l --multiline] + +Other options: + --version -> show version + --help => show this help information + +EOT +} + +sub top_of_kernel_tree { + my ($lk_path) = @_; + + if ($lk_path ne "" && substr($lk_path,length($lk_path)-1,1) ne "/") { + $lk_path .= "/"; + } + if ( (-f "${lk_path}COPYING") + && (-f "${lk_path}CREDITS") + && (-f "${lk_path}Kbuild") + && (-f "${lk_path}MAINTAINERS") + && (-f "${lk_path}Makefile") + && (-f "${lk_path}README") + && (-d "${lk_path}Documentation") + && (-d "${lk_path}arch") + && (-d "${lk_path}include") + && (-d "${lk_path}drivers") + && (-d "${lk_path}fs") + && (-d "${lk_path}init") + && (-d "${lk_path}ipc") + && (-d "${lk_path}kernel") + && (-d "${lk_path}lib") + && (-d "${lk_path}scripts")) { + return 1; + } + return 0; +} + +sub format_email { + my ($name, $email) = @_; + + $name =~ s/^\s+|\s+$//g; + $email =~ s/^\s+|\s+$//g; + + my $formatted_email = ""; + + if ($name =~ /[^a-z0-9 \.\-]/i) { ##has "must quote" chars + $name =~ s/(?"; + } else { + $formatted_email = "${name} \<${email}\>"; + } + return $formatted_email; +} + +sub add_categories { + my ($index) = @_; + + $index = $index - 1; + while ($index >= 0) { + my $tv = $typevalue[$index]; + if ($tv =~ m/^(\C):(.*)/) { + my $ptype = $1; + my $pvalue = $2; + if ($ptype eq "L") { + my $subscr = $pvalue; + if ($subscr =~ m/\s*\(subscribers-only\)/) { + if ($email_subscriber_list) { + $subscr =~ s/\s*\(subscribers-only\)//g; + push(@email_to, $subscr); + } + } else { + if ($email_list) { + push(@email_to, $pvalue); + } + } + } elsif ($ptype eq "M") { + if ($email_maintainer) { + if ($index >= 0) { + my $tv = $typevalue[$index - 1]; + if ($tv =~ m/^(\C):(.*)/) { + if ($1 eq "P" && $email_usename) { + push(@email_to, format_email($2, $pvalue)); + } else { + push(@email_to, $pvalue); + } + } + } else { + push(@email_to, $pvalue); + } + } + } elsif ($ptype eq "T") { + push(@scm, $pvalue); + } elsif ($ptype eq "W") { + push(@web, $pvalue); + } elsif ($ptype eq "S") { + push(@status, $pvalue); + } + + $index--; + } else { + push(@subsystem,$tv); + $index = -1; + } + } +} + +sub which { + my ($bin) = @_; + + foreach my $path (split /:/, $ENV{PATH}) { + if (-e "$path/$bin") { + return "$path/$bin"; + } + } + + return ""; +} + +sub recent_git_signoffs { + my ($file) = @_; + + my $sign_offs = ""; + my $cmd = ""; + my $output = ""; + my $count = 0; + my @lines = (); + + if (which("git") eq "") { + die("$P: git not found. Add --nogit to options?\n"); + } + + $cmd = "git log --since=${email_git_since} -- ${file}"; + $cmd .= " | grep -P '^ [-A-Za-z]+by:.*\\\@'"; + if (!$email_git_penguin_chiefs) { + $cmd .= " | grep -E -v \"${penguin_chiefs}\""; + } + $cmd .= " | sort | uniq -c | sort -rn"; + + $output = `${cmd}`; + $output =~ s/^\s*//gm; + + @lines = split("\n", $output); + foreach my $line (@lines) { + if ($line =~ m/([0-9]+)\s+([-A-Za-z]+by:)\s+(.*)/) { + my $sign_offs = $1; + $line = $3; + $count++; + if ($sign_offs < $email_git_min_signatures || + $count > $email_git_max_maintainers) { + last; + } + } else { + die("$P: Unexpected git output: ${line}\n"); + } + if ($line =~ m/(.*) <(.*)>/) { + my $git_name = $1; + my $git_addr = $2; + $git_name =~ tr/^\"//; + $git_name =~ tr/\"$//; + if ($email_usename) { + push(@email_to, format_email($git_name, $git_addr)); + } else { + push(@email_to, $git_addr); + } + } elsif ($line =~ m/<(.*)>/) { + my $git_addr = $1; + push(@email_to, $git_addr); + } else { + push(@email_to, $line); + } + } + return $output; +} + +sub uniq { + my @parms = @_; + + my %saw; + @parms = grep(!$saw{$_}++, @parms); + return @parms; +} + +sub sort_and_uniq { + my @parms = @_; + + my %saw; + @parms = sort @parms; + @parms = grep(!$saw{$_}++, @parms); + return @parms; +} + +sub output { + my @parms = @_; + + if ($output_multiline) { + foreach my $line (@parms) { + print("${line}\n"); + } + } else { + print(join($output_separator, @parms)); + print("\n"); + } +} -- cgit v0.10.2 From 679655daffdd2725b66ba2c5a759bbcb316fca5a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 20:44:32 -0700 Subject: MAINTAINERS - Add file patterns Better description of file pattern tag "F:" Add file exclusion tag "X:" Add patterns to sections Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 5d84358..136aac6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -72,7 +72,6 @@ M: Mail patches to L: Mailing list that is relevant to this area W: Web-page with status/info T: SCM tree type and location. Type is one of: git, hg, quilt. -F: Applicable files and/or directories S: Status, one of the following: Supported: Someone is actually paid to look after this. @@ -85,23 +84,40 @@ S: Status, one of the following: it has been replaced by a better system and you should be using that. +F: Files and directories with wildcard patterns. + A trailing slash includes all files and subdirectory files. + F: drivers/net/ all files in and below drivers/net + F: drivers/net/* all files in drivers/net, but not below + F: */net/* all files in "any top level directory"/net + One pattern per line. Multiple F: lines acceptable. +X: Files and directories that are NOT maintained, same rules as F: + Files exclusions are tested before file matches. + Can be useful for excluding a specific subdirectory, for instance: + F: net/ + X: net/ipv6/ + matches all files in and below net excluding net/ipv6/ + 3C505 NETWORK DRIVER P: Philip Blundell M: philb@gnu.org L: netdev@vger.kernel.org S: Maintained +F: drivers/net/3c505* 3C59X NETWORK DRIVER P: Steffen Klassert M: klassert@mathematik.tu-chemnitz.de L: netdev@vger.kernel.org S: Maintained +F: Documentation/networking/vortex.txt +F: drivers/net/3c59x.c 3CR990 NETWORK DRIVER P: David Dillow M: dave@thedillows.org L: netdev@vger.kernel.org S: Maintained +F: drivers/net/typhoon* 3W-9XXX SATA-RAID CONTROLLER DRIVER P: Adam Radford @@ -109,6 +125,7 @@ M: linuxraid@amcc.com L: linux-scsi@vger.kernel.org W: http://www.amcc.com S: Supported +F: drivers/scsi/3w-9xxx* 3W-XXXX ATA-RAID CONTROLLER DRIVER P: Adam Radford @@ -116,35 +133,43 @@ M: linuxraid@amcc.com L: linux-scsi@vger.kernel.org W: http://www.amcc.com S: Supported +F: drivers/scsi/3w-xxxx* 53C700 AND 53C700-66 SCSI DRIVER P: James E.J. Bottomley M: James.Bottomley@HansenPartnership.com L: linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/53c700* 6PACK NETWORK DRIVER FOR AX.25 P: Andreas Koensgen M: ajk@iehk.rwth-aachen.de L: linux-hams@vger.kernel.org S: Maintained +F: drivers/net/hamradio/6pack.c 8169 10/100/1000 GIGABIT ETHERNET DRIVER P: Francois Romieu M: romieu@fr.zoreil.com L: netdev@vger.kernel.org S: Maintained +F: drivers/net/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net S: Orphan +F: drivers/serial/8250* +F: include/linux/serial_8250.h 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.] P: Paul Gortmaker M: p_gortmaker@yahoo.com L: netdev@vger.kernel.org S: Maintained +F: drivers/net/*8390* +F: drivers/net/ax88796.c 9P FILE SYSTEM P: Eric Van Hensbergen @@ -157,12 +182,15 @@ L: v9fs-developer@lists.sourceforge.net W: http://swik.net/v9fs T: git kernel.org:/pub/scm/linux/kernel/ericvh/v9fs.git S: Maintained +F: Documentation/filesystems/9p.txt +F: fs/9p/ A2232 SERIAL BOARD DRIVER P: Enver Haase M: A2232@gmx.net L: linux-m68k@lists.linux-m68k.org S: Maintained +F: drivers/char/ser_a2232* AACRAID SCSI RAID DRIVER P: Adaptec OEM Raid Solutions @@ -170,24 +198,29 @@ M: aacraid@adaptec.com L: linux-scsi@vger.kernel.org W: http://www.adaptec.com/ S: Supported +F: Documentation/scsi/aacraid.txt +F: drivers/scsi/aacraid/ ABIT UGURU 1,2 HARDWARE MONITOR DRIVER P: Hans de Goede M: j.w.r.degoede@hhs.nl L: lm-sensors@lm-sensors.org S: Maintained +F: drivers/hwmon/abituguru.c ABIT UGURU 3 HARDWARE MONITOR DRIVER P: Alistair John Strachan M: alistair@devzero.co.uk L: lm-sensors@lm-sensors.org S: Maintained +F: drivers/hwmon/abituguru3.c ACENIC DRIVER P: Jes Sorensen M: jes@trained-monkey.org L: linux-acenic@sunsite.dk S: Maintained +F: drivers/net/acenic* ACER WMI LAPTOP EXTRAS P: Carlos Corbacho @@ -195,6 +228,7 @@ M: carlos@strangeworlds.co.uk L: aceracpi@googlegroups.com (subscribers-only) W: http://code.google.com/p/aceracpi S: Maintained +F: drivers/platform/x86/acer-wmi.c ACPI P: Len Brown @@ -203,6 +237,9 @@ L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git S: Supported +F: drivers/acpi/ +F: drivers/pnp/pnpacpi/ +F: include/linux/acpi.h ACPI BATTERY DRIVERS P: Alexey Starikovskiy @@ -210,6 +247,8 @@ M: astarikovskiy@suse.de L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported +F: drivers/acpi/battery.c +F: drivers/acpi/*sbs* ACPI EC DRIVER P: Alexey Starikovskiy @@ -217,6 +256,7 @@ M: astarikovskiy@suse.de L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported +F: drivers/acpi/ec.c ACPI FAN DRIVER P: Zhang Rui @@ -224,12 +264,14 @@ M: rui.zhang@intel.com L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported +F: drivers/acpi/fan.c ACPI PCI HOTPLUG DRIVER P: Kristen Carlson Accardi M: kristen.c.accardi@intel.com L: linux-pci@vger.kernel.org S: Supported +F: drivers/pci/hotplug/acpi* ACPI THERMAL DRIVER P: Zhang Rui @@ -237,6 +279,7 @@ M: rui.zhang@intel.com L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported +F: drivers/acpi/*thermal* ACPI VIDEO DRIVER P: Zhang Rui @@ -244,6 +287,7 @@ M: rui.zhang@intel.com L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported +F: drivers/acpi/video.c ACPI WMI DRIVER P: Carlos Corbacho @@ -251,6 +295,7 @@ M: carlos@strangeworlds.co.uk L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Maintained +F: drivers/platform/x86/wmi.c AD1889 ALSA SOUND DRIVER P: Kyle McMartin @@ -260,18 +305,22 @@ M: T-Bone@parisc-linux.org W: http://wiki.parisc-linux.org/AD1889 L: linux-parisc@vger.kernel.org S: Maintained +F: sound/pci/ad1889.* ADM1025 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/adm1025 +F: drivers/hwmon/adm1025.c ADM1029 HARDWARE MONITOR DRIVER P: Corentin Labbe M: corentin.labbe@geomatys.fr L: lm-sensors@lm-sensors.org S: Maintained +F: drivers/hwmon/adm1029.c ADM8211 WIRELESS DRIVER P: Michael Wu @@ -280,57 +329,75 @@ L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git S: Maintained +F: drivers/net/wireless/adm8211.* ADT746X FAN DRIVER P: Colin Leroy M: colin@colino.net S: Maintained +F: drivers/macintosh/therm_adt746x.c ADVANSYS SCSI DRIVER P: Matthew Wilcox M: matthew@wil.cx L: linux-scsi@vger.kernel.org S: Maintained +F: Documentation/scsi/advansys.txt +F: drivers/scsi/advansys.c AEDSP16 DRIVER P: Riccardo Facchetti M: fizban@tin.it S: Maintained +F: sound/oss/aedsp16.c AFFS FILE SYSTEM P: Roman Zippel M: zippel@linux-m68k.org S: Maintained +F: Documentation/filesystems/affs.txt +F: fs/affs/ AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN P: David Howells M: dhowells@redhat.com L: linux-afs@lists.infradead.org S: Supported +F: fs/afs/ +F: include/net/af_rxrpc.h +F: net/rxrpc/af_rxrpc.c AGPGART DRIVER P: David Airlie M: airlied@linux.ie T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained +F: drivers/char/agp/ +F: include/linux/agp* AHA152X SCSI DRIVER P: Juergen E. Fischer M: Juergen Fischer L: linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/aha152x* +F: drivers/scsi/pcmcia/aha152x* AIC7XXX / AIC79XX SCSI DRIVER P: Hannes Reinecke M: hare@suse.de L: linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/aic7xxx/ +F: drivers/scsi/aic7xxx_old/ AIO P: Benjamin LaHaise M: bcrl@kvack.org L: linux-aio@kvack.org S: Supported +F: fs/aio.c +F: include/linux/*aio*.h ALCATEL SPEEDTOUCH USB DRIVER P: Duncan Sands @@ -338,17 +405,22 @@ M: duncan.sands@free.fr L: linux-usb@vger.kernel.org W: http://www.linux-usb.org/SpeedTouch/ S: Maintained +F: drivers/usb/atm/speedtch.c +F: drivers/usb/atm/usbatm.c ALCHEMY AU1XX0 MMC DRIVER P: Manuel Lauss M: manuel.lauss@gmail.com S: Maintained +F: drivers/mmc/host/au1xmmc.c ALI1563 I2C DRIVER P: Rudolf Marek M: r.marek@assembler.cz L: linux-i2c@vger.kernel.org S: Maintained +F: Documentation/i2c/busses/i2c-ali1563 +F: drivers/i2c/busses/i2c-ali1563.c ALPHA PORT P: Richard Henderson @@ -358,18 +430,25 @@ P: Ivan Kokshaysky M: ink@jurassic.park.msu.ru S: Maintained for 2.4; PCI support for 2.6. L: linux-alpha@vger.kernel.org +F: arch/alpha/ AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER P: Thomas Dahlmann M: thomas.dahlmann@amd.com L: linux-geode@lists.infradead.org (moderated for non-subscribers) S: Supported +F: drivers/usb/gadget/amd5536udc.* AMD GEODE PROCESSOR/CHIPSET SUPPORT P: Jordan Crouse L: linux-geode@lists.infradead.org (moderated for non-subscribers) W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html S: Supported +F: arch/x86/kernel/geode_32.c +F: drivers/char/hw_random/geode-rng.c +F: drivers/crypto/geode* +F: drivers/video/geode/ +F: arch/x86/include/asm/geode.h AMD IOMMU (AMD-VI) P: Joerg Roedel @@ -377,12 +456,15 @@ M: joerg.roedel@amd.com L: iommu@lists.linux-foundation.org T: git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git S: Supported +F: arch/x86/kernel/amd_iommu*.c +F: arch/x86/include/asm/amd_iommu*.h AMD MICROCODE UPDATE SUPPORT P: Andreas Herrmann M: andeas.herrmann3@amd.com L: amd64-microcode@amd64.org S: Supported +F: arch/x86/kernel/microcode_amd.c AMS (Apple Motion Sensor) DRIVER P: Stelian Pop @@ -390,6 +472,7 @@ M: stelian@popies.net P: Michael Hanselmann M: linux-kernel@hansmi.ch S: Supported +F: drivers/hwmon/ams/ AMSO1100 RNIC DRIVER P: Tom Tucker @@ -398,6 +481,7 @@ P: Steve Wise M: swise@opengridcomputing.com L: general@lists.openfabrics.org S: Maintained +F: drivers/infiniband/hw/amso1100/ AOA (Apple Onboard Audio) ALSA DRIVER P: Johannes Berg @@ -405,6 +489,7 @@ M: johannes@sipsolutions.net L: linuxppc-dev@ozlabs.org L: alsa-devel@alsa-project.org (subscribers-only) S: Maintained +F: sound/aoa/ APM DRIVER P: Stephen Rothwell @@ -412,48 +497,63 @@ M: sfr@canb.auug.org.au L: linux-laptop@vger.kernel.org W: http://www.canb.auug.org.au/~sfr/ S: Supported +F: arch/x86/kernel/apm_32.c +F: include/linux/apm_bios.h APPLE BCM5974 MULTITOUCH DRIVER P: Henrik Rydberg M: rydberg@euromail.se L: linux-input@vger.kernel.org S: Maintained +F: drivers/input/mouse/bcm5974.c APPLE SMC DRIVER P: Nicolas Boichat M: nicolas@boichat.ch L: mactel-linux-devel@lists.sourceforge.net S: Maintained +F: drivers/hwmon/applesmc.c APPLETALK NETWORK LAYER P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net S: Maintained +F: drivers/net/appletalk/ +F: net/appletalk/ APPLETOUCH TOUCHPAD DRIVER P: Johannes Berg M: johannes@sipsolutions.net L: linux-input@vger.kernel.org S: Maintained +F: Documentation/input/appletouch.txt +F: drivers/input/mouse/appletouch.c ARC FRAMEBUFFER DRIVER P: Jaya Kumar M: jayalk@intworks.biz S: Maintained +F: drivers/video/arcfb.c +F: drivers/video/fb_defio.c ARM MFM AND FLOPPY DRIVERS P: Ian Molton M: spyro@f2s.com S: Maintained +F: arch/arm/lib/floppydma.S +F: arch/arm/include/asm/floppy.h ARM PRIMECELL MMCI PL180/1 DRIVER S: Orphan +F: drivers/mmc/host/mmci.* ARM/ADI ROADRUNNER MACHINE SUPPORT P: Lennert Buytenhek M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +F: arch/arm/mach-ixp23xx/ +F: arch/arm/mach-ixp23xx/include/mach/ ARM/ADS SPHERE MACHINE SUPPORT P: Lennert Buytenhek @@ -717,6 +817,7 @@ ARPD SUPPORT P: Jonathan Layes L: netdev@vger.kernel.org S: Maintained +F: net/ipv4/arp.c ASUS ACPI EXTRAS DRIVER P: Corentin Chary @@ -727,12 +828,15 @@ L: acpi4asus-user@lists.sourceforge.net W: http://sourceforge.net/projects/acpi4asus W: http://xf.iksaif.net/acpi4asus S: Maintained +F: arch/x86/kernel/acpi/boot.c +F: drivers/platform/x86/asus_acpi.c ASUS ASB100 HARDWARE MONITOR DRIVER P: Mark M. Hoffman M: mhoffman@lightlink.com L: lm-sensors@lm-sensors.org S: Maintained +F: drivers/hwmon/asb100.c ASUS LAPTOP EXTRAS DRIVER P: Corentin Chary @@ -741,6 +845,7 @@ L: acpi4asus-user@lists.sourceforge.net W: http://sourceforge.net/projects/acpi4asus W: http://xf.iksaif.net/acpi4asus S: Maintained +F: drivers/platform/x86/asus-laptop.c ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API P: Dan Williams @@ -750,12 +855,19 @@ M: maciej.sosnowski@intel.com L: linux-kernel@vger.kernel.org W: http://sourceforge.net/projects/xscaleiop S: Supported +F: Documentation/crypto/async-tx-api.txt +F: crypto/async_tx/ +F: drivers/dma/ +F: include/linux/dmaengine.h +F: include/linux/async_tx.h ATA OVER ETHERNET (AOE) DRIVER P: Ed L. Cashin M: ecashin@coraid.com W: http://www.coraid.com/support/linux S: Supported +F: Documentation/aoe/ +F: drivers/block/aoe/ ATHEROS ATH5K WIRELESS DRIVER P: Jiri Slaby @@ -769,6 +881,7 @@ M: me@bobcopeland.com L: linux-wireless@vger.kernel.org L: ath5k-devel@lists.ath5k.org S: Maintained +F: drivers/net/wireless/ath5k/ ATHEROS ATH9K WIRELESS DRIVER P: Luis R. Rodriguez @@ -778,6 +891,7 @@ M: jmalinen@atheros.com L: linux-wireless@vger.kernel.org L: ath9k-devel@lists.ath9k.org S: Supported +F: drivers/net/wireless/ath9k/ ATHEROS AR9170 WIRELESS DRIVER P: Christian Lamparter @@ -791,6 +905,7 @@ ATI_REMOTE2 DRIVER P: Ville Syrjala M: syrjala@sci.fi S: Maintained +F: drivers/input/misc/ati_remote2.c ATLX ETHERNET DRIVERS P: Jay Cliburn @@ -803,6 +918,7 @@ L: atl1-devel@lists.sourceforge.net W: http://sourceforge.net/projects/atl1 W: http://atl1.sourceforge.net S: Maintained +F: drivers/net/atlx/ ATM P: Chas Williams @@ -811,6 +927,8 @@ L: linux-atm-general@lists.sourceforge.net (subscribers-only) L: netdev@vger.kernel.org W: http://linux-atm.sourceforge.net S: Maintained +F: drivers/atm/ +F: include/linux/atm* ATMEL AT91 MCI DRIVER P: Nicolas Ferre @@ -819,28 +937,34 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.atmel.com/products/AT91/ W: http://www.at91.com/ S: Maintained +F: drivers/mmc/host/at91_mci.c ATMEL AT91 / AT32 SERIAL DRIVER P: Haavard Skinnemoen M: hskinnemoen@atmel.com L: linux-kernel@vger.kernel.org S: Supported +F: drivers/serial/atmel_serial.c ATMEL LCDFB DRIVER P: Nicolas Ferre M: nicolas.ferre@atmel.com L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: drivers/video/atmel_lcdfb.c +F: include/video/atmel_lcdc.h ATMEL MACB ETHERNET DRIVER P: Haavard Skinnemoen M: hskinnemoen@atmel.com S: Supported +F: drivers/net/macb.* ATMEL SPI DRIVER P: Haavard Skinnemoen M: hskinnemoen@atmel.com S: Supported +F: drivers/spi/atmel_spi.* ATMEL USBA UDC DRIVER P: Haavard Skinnemoen @@ -848,6 +972,7 @@ M: hskinnemoen@atmel.com L: kernel@avr32linux.org W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver S: Supported +F: drivers/usb/gadget/atmel_usba_udc.* ATMEL WIRELESS DRIVER P: Simon Kelley @@ -856,6 +981,7 @@ L: linux-wireless@vger.kernel.org W: http://www.thekelleys.org.uk/atmel W: http://atmelwlandriver.sourceforge.net/ S: Maintained +F: drivers/net/wireless/atmel* AUDIT SUBSYSTEM P: Al Viro @@ -866,6 +992,8 @@ L: linux-audit@redhat.com (subscribers-only) W: http://people.redhat.com/sgrubb/audit/ T: git git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git S: Maintained +F: include/linux/audit.h +F: kernel/audit* AUXILIARY DISPLAY DRIVERS P: Miguel Ojeda Sandonis @@ -874,6 +1002,8 @@ L: linux-kernel@vger.kernel.org W: http://miguelojeda.es/auxdisplay.htm W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained +F: drivers/auxdisplay/ +F: include/linux/cfag12864b.h AVR32 ARCHITECTURE P: Haavard Skinnemoen @@ -882,11 +1012,13 @@ W: http://www.atmel.com/products/AVR32/ W: http://avr32linux.org/ W: http://avrfreaks.net/ S: Supported +F: arch/avr32/ AVR32/AT32AP MACHINE SUPPORT P: Haavard Skinnemoen M: hskinnemoen@atmel.com S: Supported +F: arch/avr32/mach-at32ap/ AX.25 NETWORK LAYER P: Ralf Baechle @@ -894,6 +1026,9 @@ M: ralf@linux-mips.org L: linux-hams@vger.kernel.org W: http://www.linux-ax25.org/ S: Maintained +F: include/linux/ax25.h +F: include/net/ax25.h +F: net/ax25/ B43 WIRELESS DRIVER P: Michael Buesch @@ -903,6 +1038,7 @@ M: stefano.brivio@polimi.it L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/en/users/Drivers/b43 S: Maintained +F: drivers/net/wireless/b43/ B43LEGACY WIRELESS DRIVER P: Larry Finger @@ -912,11 +1048,14 @@ M: stefano.brivio@polimi.it L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/en/users/Drivers/b43 S: Maintained +F: drivers/net/wireless/b43legacy/ BACKLIGHT CLASS/SUBSYSTEM P: Richard Purdie M: rpurdie@rpsys.net S: Maintained +F: drivers/video/backlight/ +F: include/linux/backlight.h BAYCOM/HDLCDRV DRIVERS FOR AX.25 P: Thomas Sailer @@ -924,18 +1063,24 @@ M: t.sailer@alumni.ethz.ch L: linux-hams@vger.kernel.org W: http://www.baycom.org/~tom/ham/ham.html S: Maintained +F: drivers/net/hamradio/baycom* BEFS FILE SYSTEM P: Sergey S. Kostyliov M: rathamahata@php4.ru L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/filesystems/befs.txt +F: fs/befs/ BFS FILE SYSTEM P: Tigran A. Aivazian M: tigran@aivazian.fsnet.co.uk L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/filesystems/bfs.txt +F: fs/bfs/ +F: include/linux/bfs_fs.h BLACKFIN ARCHITECTURE P: Bryan Wu @@ -943,6 +1088,7 @@ M: cooloney@kernel.org L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported +F: arch/blackfin/ BLACKFIN EMAC DRIVER P: Bryan Wu @@ -950,6 +1096,7 @@ M: cooloney@kernel.org L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported +F: drivers/net/bfin_mac.* BLACKFIN RTC DRIVER P: Mike Frysinger @@ -957,6 +1104,7 @@ M: vapier.adi@gmail.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported +F: drivers/rtc/rtc-bfin.c BLACKFIN SERIAL DRIVER P: Sonic Zhang @@ -964,6 +1112,7 @@ M: sonic.zhang@analog.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported +F: drivers/serial/bfin_5xx.c BLACKFIN WATCHDOG DRIVER P: Mike Frysinger @@ -971,6 +1120,7 @@ M: vapier.adi@gmail.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported +F: drivers/watchdog/bfin_wdt.c BLACKFIN I2C TWI DRIVER P: Sonic Zhang @@ -978,6 +1128,7 @@ M: sonic.zhang@analog.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org/ S: Supported +F: drivers/i2c/busses/i2c-bfin-twi.c BLOCK LAYER P: Jens Axboe @@ -985,12 +1136,14 @@ M: axboe@kernel.dk L: linux-kernel@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git S: Maintained +F: block/ BLOCK2MTD DRIVER P: Joern Engel M: joern@lazybastard.org L: linux-mtd@lists.infradead.org S: Maintained +F: drivers/mtd/devices/block2mtd.c BLUETOOTH DRIVERS P: Marcel Holtmann @@ -998,6 +1151,7 @@ M: marcel@holtmann.org L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ S: Maintained +F: drivers/bluetooth/ BLUETOOTH SUBSYSTEM P: Marcel Holtmann @@ -1006,6 +1160,8 @@ L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git S: Maintained +F: net/bluetooth/ +F: include/net/bluetooth/ BONDING DRIVER P: Jay Vosburgh @@ -1013,24 +1169,30 @@ M: fubar@us.ibm.com L: bonding-devel@lists.sourceforge.net W: http://sourceforge.net/projects/bonding/ S: Supported +F: drivers/net/bonding/ +F: include/linux/if_bonding.h BROADCOM B44 10/100 ETHERNET DRIVER P: Gary Zambrano M: zambrano@broadcom.com L: netdev@vger.kernel.org S: Supported +F: drivers/net/b44.* BROADCOM BNX2 GIGABIT ETHERNET DRIVER P: Michael Chan M: mchan@broadcom.com L: netdev@vger.kernel.org S: Supported +F: drivers/net/bnx2.* +F: drivers/net/bnx2_* BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER P: Eilon Greenstein M: eilong@broadcom.com L: netdev@vger.kernel.org S: Supported +F: drivers/net/bnx2x* BROADCOM TG3 GIGABIT ETHERNET DRIVER P: Matt Carlson @@ -1039,18 +1201,22 @@ P: Michael Chan M: mchan@broadcom.com L: netdev@vger.kernel.org S: Supported +F: drivers/net/tg3.* BSG (block layer generic sg v4 driver) P: FUJITA Tomonori M: fujita.tomonori@lab.ntt.co.jp L: linux-scsi@vger.kernel.org S: Supported +F: block/bsg.c +F: include/linux/bsg.h BT8XXGPIO DRIVER P: Michael Buesch M: mb@bu3sch.de W: http://bu3sch.de/btgpio.php S: Maintained +F: drivers/gpio/bt8xxgpio.c BTRFS FILE SYSTEM P: Chris Mason @@ -1059,6 +1225,8 @@ L: linux-btrfs@vger.kernel.org W: http://btrfs.wiki.kernel.org/ T: git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git S: Maintained +F: Documentation/filesystems/btrfs.txt +F: fs/btrfs/ BTTV VIDEO4LINUX DRIVER P: Mauro Carvalho Chehab @@ -1067,6 +1235,8 @@ L: linux-media@vger.kernel.org W: http://linuxtv.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: Documentation/video4linux/bttv/ +F: drivers/media/video/bt8xx/bttv* CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER P: Jonathan Corbet @@ -1074,6 +1244,8 @@ M: corbet@lwn.net L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: Documentation/video4linux/cafe_ccic +F: drivers/media/video/cafe_ccic* CALGARY x86-64 IOMMU P: Muli Ben-Yehuda @@ -1083,6 +1255,10 @@ M: jdmason@kudzu.us L: linux-kernel@vger.kernel.org L: discuss@x86-64.org S: Maintained +F: arch/x86/kernel/pci-calgary_64.c +F: arch/x86/kernel/tce_64.c +F: arch/x86/include/asm/calgary.h +F: arch/x86/include/asm/tce.h CAN NETWORK LAYER P: Urs Thuermann @@ -1092,6 +1268,9 @@ M: oliver.hartkopp@volkswagen.de L: socketcan-core@lists.berlios.de (subscribers-only) W: http://developer.berlios.de/projects/socketcan/ S: Maintained +F: drivers/net/can/ +F: include/linux/can/ +F: include/linux/can.h CELL BROADBAND ENGINE ARCHITECTURE P: Arnd Bergmann @@ -1100,12 +1279,23 @@ L: linuxppc-dev@ozlabs.org L: cbe-oss-dev@ozlabs.org W: http://www.ibm.com/developerworks/power/cell/ S: Supported +F: arch/powerpc/include/asm/cell*.h +F: arch/powerpc/include/asm/lv1call.h +F: arch/powerpc/include/asm/ps3*.h +F: arch/powerpc/include/asm/spu*.h +F: arch/powerpc/oprofile/*cell* +F: arch/powerpc/platforms/cell/ +F: arch/powerpc/platforms/ps3/ CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM: P: David Vrabel M: david.vrabel@csr.com L: linux-usb@vger.kernel.org S: Supported +F: Documentation/usb/WUSB-Design-overview.txt +F: Documentation/usb/wusb-cbaf +F: drivers/usb/wusbcore/ +F: include/linux/usb/wusb* CFAG12864B LCD DRIVER P: Miguel Ojeda Sandonis @@ -1114,6 +1304,8 @@ L: linux-kernel@vger.kernel.org W: http://miguelojeda.es/auxdisplay.htm W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained +F: drivers/auxdisplay/cfag12864b.c +F: include/linux/cfag12864b.h CFAG12864BFB LCD FRAMEBUFFER DRIVER P: Miguel Ojeda Sandonis @@ -1122,18 +1314,25 @@ L: linux-kernel@vger.kernel.org W: http://miguelojeda.es/auxdisplay.htm W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained +F: drivers/auxdisplay/cfag12864bfb.c +F: include/linux/cfag12864b.h CFG80211 and NL80211 P: Johannes Berg M: johannes@sipsolutions.net L: linux-wireless@vger.kernel.org S: Maintained +F: include/linux/nl80211.h +F: include/net/cfg80211.h +F: net/wireless/* +X: net/wireless/wext* CHECKPATCH P: Andy Whitcroft M: apw@canonical.com L: linux-kernel@vger.kernel.org S: Supported +F: scripts/checkpatch.pl CISCO 10G ETHERNET DRIVER P: Scott Feldman @@ -1141,24 +1340,29 @@ M: scofeldm@cisco.com P: Joe Eykholt M: jeykholt@cisco.com S: Supported +F: drivers/net/enic/ CIRRUS LOGIC EP93XX ETHERNET DRIVER P: Lennert Buytenhek M: kernel@wantstofly.org L: netdev@vger.kernel.org S: Maintained +F: drivers/net/arm/ep93xx_eth.c CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER P: Lennert Buytenhek M: kernel@wantstofly.org L: linux-usb@vger.kernel.org S: Maintained +F: drivers/usb/host/ohci-ep93xx.c CIRRUS LOGIC CS4270 SOUND DRIVER P: Timur Tabi M: timur@freescale.com L: alsa-devel@alsa-project.org S: Supported +F: sound/soc/codecs/cs4270* +F: sound/soc/fsl/mpc8610_hpcd.c CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER P: Cirrus Logic Corporation (kernel 2.2 driver) @@ -1166,6 +1370,8 @@ M: Cirrus Logic Corporation, Thomas Woller P: Nils Faerber (port to kernel 2.4) M: Nils Faerber S: Maintained +F: Documentation/input/cs461x.txt +F: sound/pci/cs46xx/ CODA FILE SYSTEM P: Jan Harkes @@ -1174,6 +1380,9 @@ M: coda@cs.cmu.edu L: codalist@coda.cs.cmu.edu W: http://www.coda.cs.cmu.edu/ S: Maintained +F: Documentation/filesystems/coda.txt +F: fs/coda/ +F: include/linux/coda*.h COMMON INTERNET FILE SYSTEM (CIFS) P: Steve French @@ -1183,6 +1392,8 @@ L: samba-technical@lists.samba.org W: http://linux-cifs.samba.org/ T: git kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git S: Supported +F: Documentation/filesystems/cifs.txt +F: fs/cifs/ COMPACTPCI HOTPLUG CORE P: Scott Murray @@ -1190,6 +1401,7 @@ M: scottm@somanetworks.com M: scott@spiteful.org L: linux-pci@vger.kernel.org S: Supported +F: drivers/pci/hotplug/cpci_hotplug* COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER P: Scott Murray @@ -1197,6 +1409,7 @@ M: scottm@somanetworks.com M: scott@spiteful.org L: linux-pci@vger.kernel.org S: Supported +F: drivers/pci/hotplug/cpcihp_zt5550.* COMPACTPCI HOTPLUG GENERIC DRIVER P: Scott Murray @@ -1204,17 +1417,21 @@ M: scottm@somanetworks.com M: scott@spiteful.org L: linux-pci@vger.kernel.org S: Supported +F: drivers/pci/hotplug/cpcihp_generic.c COMPAL LAPTOP SUPPORT P: Cezary Jackiewicz M: cezary.jackiewicz@gmail.com S: Maintained +F: drivers/platform/x86/compal-laptop.c COMPUTONE INTELLIPORT MULTIPORT CARD P: Michael H. Warfield M: mhw@wittsend.com W: http://www.wittsend.com/computone.html S: Maintained +F: Documentation/serial/computone.txt +F: drivers/char/ip2/ CONEXANT ACCESSRUNNER USB DRIVER P: Simon Arlott @@ -1222,12 +1439,15 @@ M: cxacru@fire.lp0.eu L: accessrunner-general@lists.sourceforge.net W: http://accessrunner.sourceforge.net/ S: Maintained +F: drivers/usb/atm/cxacru.c CONFIGFS P: Joel Becker M: joel.becker@oracle.com L: linux-kernel@vger.kernel.org S: Supported +F: fs/configfs/ +F: include/linux/configfs.h CONTROL GROUPS (CGROUPS) P: Paul Menage @@ -1236,18 +1456,23 @@ P: Li Zefan M: lizf@cn.fujitsu.com L: containers@lists.linux-foundation.org S: Maintained +F: include/linux/cgroup* +F: kernel/cgroup* CORETEMP HARDWARE MONITORING DRIVER P: Rudolf Marek M: r.marek@assembler.cz L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/coretemp +F: drivers/hwmon/coretemp.c COSA/SRP SYNC SERIAL DRIVER P: Jan "Yenya" Kasprzak M: kas@fi.muni.cz W: http://www.fi.muni.cz/~kas/cosa/ S: Maintained +F: drivers/net/wan/cosa* CPU FREQUENCY DRIVERS P: Dave Jones @@ -1256,11 +1481,16 @@ L: cpufreq@vger.kernel.org W: http://www.codemonkey.org.uk/projects/cpufreq/ T: git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git S: Maintained +F: arch/x86/kernel/cpu/cpufreq/ +F: drivers/cpufreq/ +F: include/linux/cpufreq.h CPUID/MSR DRIVER P: H. Peter Anvin M: hpa@zytor.com S: Maintained +F: arch/x86/kernel/cpuid.c +F: arch/x86/kernel/msr.c CPUSETS P: Paul Menage @@ -1269,10 +1499,15 @@ L: linux-kernel@vger.kernel.org W: http://www.bullopensource.org/cpuset/ W: http://oss.sgi.com/projects/cpusets/ S: Supported +F: Documentation/cgroups/cpusets.txt +F: include/linux/cpuset.h +F: kernel/cpuset.c CRAMFS FILESYSTEM W: http://sourceforge.net/projects/cramfs/ S: Orphan +F: Documentation/filesystems/cramfs.txt +F: fs/cramfs/ CRIS PORT P: Mikael Starvik @@ -1282,6 +1517,7 @@ M: jesper.nilsson@axis.com L: dev-etrax@axis.com W: http://developer.axis.com S: Maintained +F: arch/cris/ CRYPTO API P: Herbert Xu @@ -1291,6 +1527,11 @@ M: davem@davemloft.net L: linux-crypto@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6.git S: Maintained +F: Documentation/crypto/ +F: arch/*/crypto/ +F: crypto/ +F: drivers/crypto/ +F: include/crypto/ CRYPTOGRAPHIC RANDOM NUMBER GENERATOR P: Neil Horman @@ -1302,6 +1543,7 @@ CS5535 Audio ALSA driver P: Jaya Kumar M: jayakumar.alsa@gmail.com S: Maintained +F: sound/pci/cs5535audio/ CX18 VIDEO4LINUX DRIVER P: Hans Verkuil, Andy Walls @@ -1312,6 +1554,8 @@ L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://linuxtv.org S: Maintained +F: Documentation/video4linux/cx18.txt +F: drivers/media/video/cx18/ CXGB3 ETHERNET DRIVER (CXGB3) P: Divy Le Ray @@ -1319,6 +1563,7 @@ M: divy@chelsio.com L: netdev@vger.kernel.org W: http://www.chelsio.com S: Supported +F: drivers/net/cxgb3/ CXGB3 IWARP RNIC DRIVER (IW_CXGB3) P: Steve Wise @@ -1326,12 +1571,14 @@ M: swise@chelsio.com L: general@lists.openfabrics.org W: http://www.openfabrics.org S: Supported +F: drivers/infiniband/hw/cxgb3/ CYBERPRO FB DRIVER P: Russell King M: rmk@arm.linux.org.uk W: http://www.arm.linux.org.uk/ S: Maintained +F: drivers/video/cyber2000fb.* CYBLAFB FRAMEBUFFER DRIVER P: Knut Petersen @@ -1344,14 +1591,18 @@ P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net W: http://oops.ghostprotocols.net:81/blog S: Maintained +F: drivers/net/wan/cycx* CYCLADES ASYNC MUX DRIVER W: http://www.cyclades.com/ S: Orphan +F: drivers/char/cyclades.c +F: include/linux/cyclades.h CYCLADES PC300 DRIVER W: http://www.cyclades.com/ S: Orphan +F: drivers/net/wan/pc300* DAMA SLAVE for AX.25 P: Joerg Reuter @@ -1360,12 +1611,21 @@ W: http://yaina.de/jreuter/ W: http://www.qsl.net/dl1bke/ L: linux-hams@vger.kernel.org S: Maintained +F: net/ax25/af_ax25.c +F: net/ax25/ax25_dev.c +F: net/ax25/ax25_ds_* +F: net/ax25/ax25_in.c +F: net/ax25/ax25_out.c +F: net/ax25/ax25_timer.c +F: net/ax25/sysctl_net_ax25.c DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER P: Tobias Ringstrom M: tori@unhappy.mine.nu L: netdev@vger.kernel.org S: Maintained +F: Documentation/networking/dmfe.txt +F: drivers/net/tulip/dmfe.c DC390/AM53C974 SCSI driver P: Kurt Garloff @@ -1374,6 +1634,7 @@ W: http://www.garloff.de/kurt/linux/dc390/ P: Guennadi Liakhovetski M: g.liakhovetski@gmx.de S: Maintained +F: drivers/scsi/tmscsim.* DC395x SCSI driver P: Oliver Neukum @@ -1386,6 +1647,8 @@ W: http://twibble.org/dist/dc395x/ L: dc395x@twibble.org L: http://lists.twibble.org/mailman/listinfo/dc395x/ S: Maintained +F: Documentation/scsi/dc395x.txt +F: drivers/scsi/dc395x.* DCCP PROTOCOL P: Arnaldo Carvalho de Melo @@ -1393,6 +1656,9 @@ M: acme@ghostprotocols.net L: dccp@vger.kernel.org W: http://linux-net.osdl.org/index.php/DCCP S: Maintained +F: include/linux/dccp.h +F: include/linux/tfrc.h +F: net/dccp/ DECnet NETWORK LAYER P: Christine Caulfield @@ -1400,27 +1666,35 @@ M: christine.caulfield@googlemail.com W: http://linux-decnet.sourceforge.net L: linux-decnet-user@lists.sourceforge.net S: Maintained +F: Documentation/networking/decnet.txt +F: net/decnet/ DEFXX FDDI NETWORK DRIVER P: Maciej W. Rozycki M: macro@linux-mips.org S: Maintained +F: drivers/net/defxx.* DELL LAPTOP DRIVER P: Matthew Garrett M: mjg59@srcf.ucam.org S: Maintained +F: drivers/platform/x86/dell-laptop.c DELL LAPTOP SMM DRIVER P: Massimo Dal Zotto M: dz@debian.org W: http://www.debian.org/~dz/i8k/ S: Maintained +F: drivers/char/i8k.c +F: include/linux/i8k.h DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas) P: Doug Warzecha M: Douglas_Warzecha@dell.com S: Maintained +F: Documentation/dcdbas.txt +F: drivers/firmware/dcdbas.* DELL WMI EXTRAS DRIVER P: Matthew Garrett @@ -1439,6 +1713,10 @@ P: Alasdair Kergon L: dm-devel@redhat.com W: http://sources.redhat.com/dm S: Maintained +F: Documentation/device-mapper/ +F: drivers/md/dm* +F: include/linux/device-mapper.h +F: include/linux/dm-*.h DIGI INTL. EPCA DRIVER P: Digi International, Inc @@ -1446,12 +1724,18 @@ M: Eng.Linux@digi.com L: Eng.Linux@digi.com W: http://www.digi.com S: Orphan +F: Documentation/serial/digiepca.txt +F: drivers/char/epca* +F: drivers/char/digi* DIRECTORY NOTIFICATION (DNOTIFY) P: Stephen Rothwell M: sfr@canb.auug.org.au L: linux-kernel@vger.kernel.org S: Supported +F: Documentation/filesystems/dnotify.txt +F: fs/notify/dnotify/ +F: include/linux/dnotify.h DISK GEOMETRY AND PARTITION HANDLING P: Andries Brouwer @@ -1466,6 +1750,9 @@ P: Jan Kara M: jack@suse.cz L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/filesystems/quota.txt +F: fs/quota/ +F: include/linux/quota*.h DISTRIBUTED LOCK MANAGER (DLM) P: Christine Caulfield @@ -1476,6 +1763,7 @@ L: cluster-devel@redhat.com W: http://sources.redhat.com/cluster/ T: git kernel.org:/pub/scm/linux/kernel/git/teigland/dlm.git S: Supported +F: fs/dlm/ DMA GENERIC OFFLOAD ENGINE SUBSYSTEM P: Maciej Sosnowski @@ -1484,12 +1772,16 @@ P: Dan Williams M: dan.j.williams@intel.com L: linux-kernel@vger.kernel.org S: Supported +F: drivers/dma/ +F: include/linux/dma* DME1737 HARDWARE MONITOR DRIVER P: Juerg Haefliger M: juergh@gmail.com L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/dme1737 +F: drivers/hwmon/dme1737.c DOCBOOK FOR DOCUMENTATION P: Randy Dunlap @@ -1501,18 +1793,22 @@ P: Shaohua Li M: shaohua.li@intel.com L: linux-acpi@vger.kernel.org S: Supported +F: drivers/acpi/dock.c DOCUMENTATION (/Documentation directory) P: Randy Dunlap M: rdunlap@xenotime.net L: linux-doc@vger.kernel.org S: Maintained +F: Documentation/ DOUBLETALK DRIVER P: James R. Van Zandt M: jrv@vanzandt.mv.com L: blinux-list@redhat.com S: Maintained +F: drivers/char/dtlk.c +F: include/linux/dtlk.h DPT_I2O SCSI RAID DRIVER P: Adaptec OEM Raid Solutions @@ -1520,6 +1816,8 @@ M: aacraid@adaptec.com L: linux-scsi@vger.kernel.org W: http://www.adaptec.com/ S: Maintained +F: drivers/scsi/dpt* +F: drivers/scsi/dpt/ DRIVER CORE, KOBJECTS, AND SYSFS P: Greg Kroah-Hartman @@ -1527,6 +1825,11 @@ M: gregkh@suse.de L: linux-kernel@vger.kernel.org T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported +F: Documentation/kobject.txt +F: drivers/base/core.c +F: fs/sysfs/ +F: include/linux/kobj* +F: lib/kobj* DRM DRIVERS P: David Airlie @@ -1534,12 +1837,14 @@ M: airlied@linux.ie L: dri-devel@lists.sourceforge.net T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained +F: drivers/gpu/drm/ DSCC4 DRIVER P: Francois Romieu M: romieu@fr.zoreil.com L: netdev@vger.kernel.org S: Maintained +F: drivers/net/wan/dscc4.c DVB SUBSYSTEM AND DRIVERS P: LinuxTV.org Project @@ -1547,28 +1852,36 @@ M: linux-media@vger.kernel.org W: http://linuxtv.org/ T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: Documentation/dvb/ +F: drivers/media/dvb/ +F: drivers/media/common/saa7146*.c +F: include/linux/dvb/ DZ DECSTATION DZ11 SERIAL DRIVER P: Maciej W. Rozycki M: macro@linux-mips.org S: Maintained +F: drivers/serial/dz.* EATA-DMA SCSI DRIVER P: Michael Neuffer L: linux-eata@i-connect.net, linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/eata* EATA ISA/EISA/PCI SCSI DRIVER P: Dario Ballabio M: ballabio_dario@emc.com L: linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/eata.c EATA-PIO SCSI DRIVER P: Michael Neuffer M: mike@i-Connect.Net L: linux-eata@i-connect.net, linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/eata_pio.* EBTABLES P: Bart De Schuymer @@ -1577,6 +1890,8 @@ L: ebtables-user@lists.sourceforge.net L: ebtables-devel@lists.sourceforge.net W: http://ebtables.sourceforge.net/ S: Maintained +F: include/linux/netfilter_bridge/ebt_*.h +F: net/bridge/netfilter/ebt*.c ECRYPT FILE SYSTEM P: Tyler Hicks, Dustin Kirkland @@ -1584,6 +1899,8 @@ M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com L: ecryptfs-devel@lists.launchpad.net W: https://launchpad.net/ecryptfs S: Supported +F: Documentation/filesystems/ecryptfs.txt +F: fs/ecryptfs/ EDAC-CORE P: Doug Thompson @@ -1591,6 +1908,9 @@ M: dougthompson@xmission.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Supported +F: Documentation/edac.txt +F: drivers/edac/edac_* +F: include/linux/edac.h EDAC-E752X P: Mark Gross @@ -1600,6 +1920,7 @@ M: dougthompson@xmission.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained +F: drivers/edac/e752x_edac.c EDAC-E7XXX P: Doug Thompson @@ -1607,6 +1928,7 @@ M: dougthompson@xmission.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained +F: drivers/edac/e7xxx_edac.c EDAC-I82443BXGX P: Tim Small @@ -1614,6 +1936,7 @@ M: tim@buttersideup.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained +F: drivers/edac/i82443bxgx_edac.c EDAC-I3000 P: Jason Uhlenkott @@ -1621,6 +1944,7 @@ M: juhlenko@akamai.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained +F: drivers/edac/i3000_edac.c EDAC-I5000 P: Doug Thompson @@ -1628,6 +1952,7 @@ M: dougthompson@xmission.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained +F: drivers/edac/i5000_edac.c EDAC-I5400 P: Mauro Carvalho Chehab @@ -1635,6 +1960,7 @@ M: mchehab@redhat.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained +F: drivers/edac/i5400_edac.c EDAC-I82975X P: Ranganathan Desikan @@ -1644,6 +1970,7 @@ M: arvind@acarlab.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained +F: drivers/edac/i82975x_edac.c EDAC-PASEMI P: Egor Martovetsky @@ -1651,6 +1978,7 @@ M: egor@pasemi.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained +F: drivers/edac/pasemi_edac.c EDAC-R82600 P: Tim Small @@ -1658,6 +1986,7 @@ M: tim@buttersideup.com L: bluesmoke-devel@lists.sourceforge.net W: bluesmoke.sourceforge.net S: Maintained +F: drivers/edac/r82600_edac.c EEEPC LAPTOP EXTRAS DRIVER P: Corentin Chary @@ -1665,10 +1994,12 @@ M: corentincj@iksaif.net L: acpi4asus-user@lists.sourceforge.net W: http://sourceforge.net/projects/acpi4asus S: Maintained +F: drivers/platform/x86/eeepc-laptop.c EFS FILESYSTEM W: http://aeschi.ch.eu.org/efs/ S: Orphan +F: fs/efs/ EHCA (IBM GX bus InfiniBand adapter) DRIVER P: Hoang-Nam Nguyen @@ -1677,6 +2008,7 @@ P: Christoph Raisch M: raisch@de.ibm.com L: general@lists.openfabrics.org S: Supported +F: drivers/infiniband/hw/ehca/ EMBEDDED LINUX P: Paul Gortmaker @@ -1692,22 +2024,27 @@ M: james.smart@emulex.com L: linux-scsi@vger.kernel.org W: http://sourceforge.net/projects/lpfcxxxx S: Supported +F: drivers/scsi/lpfc/ EPSON 1355 FRAMEBUFFER DRIVER P: Christopher Hoover M: ch@murgatroid.com, ch@hpl.hp.com S: Maintained +F: drivers/video/epson1355fb.c EPSON S1D13XXX FRAMEBUFFER DRIVER P: Kristoffer Ericson M: kristoffer.ericson@gmail.com S: Maintained +F: drivers/video/s1d13xxxfb.c +F: include/video/s1d13xxxfb.h ETHEREXPRESS-16 NETWORK DRIVER P: Philip Blundell M: philb@gnu.org L: netdev@vger.kernel.org S: Maintained +F: drivers/net/eexpress.* ETHERNET BRIDGE P: Stephen Hemminger @@ -1715,21 +2052,30 @@ M: shemminger@linux-foundation.org L: bridge@lists.linux-foundation.org W: http://www.linux-foundation.org/en/Net:Bridge S: Maintained +F: include/linux/netfilter_bridge/ +F: net/bridge/ ETHERTEAM 16I DRIVER P: Mika Kuoppala M: miku@iki.fi S: Maintained +F: drivers/net/eth16i.c EXT2 FILE SYSTEM L: linux-ext4@vger.kernel.org S: Maintained +F: Documentation/filesystems/ext2.txt +F: fs/ext2/ +F: include/linux/ext2* EXT3 FILE SYSTEM P: Stephen Tweedie, Andrew Morton M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com L: linux-ext4@vger.kernel.org S: Maintained +F: Documentation/filesystems/ext3.txt +F: fs/ext3/ +F: include/linux/ext3* EXT4 FILE SYSTEM P: Theodore Ts'o @@ -1737,35 +2083,47 @@ M: tytso@mit.edu, adilger@sun.com L: linux-ext4@vger.kernel.org W: http://ext4.wiki.kernel.org S: Maintained +F: Documentation/filesystems/ext4.txt +F: fs/ext4/ F71805F HARDWARE MONITORING DRIVER P: Jean Delvare M: khali@linux-fr.org L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/f71805f +F: drivers/hwmon/f71805f.c FARSYNC SYNCHRONOUS DRIVER P: Kevin Curtis M: kevin.curtis@farsite.co.uk W: http://www.farsite.co.uk/ S: Supported +F: drivers/net/wan/farsync.* FAULT INJECTION SUPPORT P: Akinobu Mita M: akinobu.mita@gmail.com S: Supported +F: Documentation/fault-injection/ +F: lib/fault-inject.c FILE LOCKING (flock() and fcntl()/lockf()) P: Matthew Wilcox M: matthew@wil.cx L: linux-fsdevel@vger.kernel.org S: Maintained +F: include/linux/fcntl.h +F: include/linux/fs.h +F: fs/fcntl.c +F: fs/locks.c FILESYSTEMS (VFS and infrastructure) P: Alexander Viro M: viro@zeniv.linux.org.uk L: linux-fsdevel@vger.kernel.org S: Maintained +F: fs/* FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER P: Riku Voipio @@ -1780,22 +2138,30 @@ L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git S: Maintained +F: drivers/firewire/ +F: include/linux/firewire*.h FIRMWARE LOADER (request_firmware) L: linux-kernel@vger.kernel.org S: Orphan +F: Documentation/firmware_class/ +F: drivers/base/firmware*.c +F: include/linux/firmware.h FPU EMULATOR P: Bill Metzenthen M: billm@suburbia.net W: http://suburbia.net/~billm/floating-point/emulator/ S: Maintained +F: arch/x86/math-emu/ FRAME RELAY DLCI/FRAD (Sangoma drivers too) P: Mike McLagan M: mike.mclagan@linux.org L: netdev@vger.kernel.org S: Maintained +F: drivers/net/wan/dlci.c +F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER P: Antonino Daplas @@ -1803,6 +2169,9 @@ M: adaplas@gmail.com L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://linux-fbdev.sourceforge.net/ S: Maintained +F: Documentation/fb/ +F: drivers/video/fb* +F: include/linux/fb.h FREESCALE DMA DRIVER P: Li Yang @@ -1812,6 +2181,7 @@ M: zw@zh-kernel.org L: linuxppc-embedded@ozlabs.org L: linux-kernel@vger.kernel.org S: Maintained +F: drivers/dma/fsldma.* FREESCALE I2C CPM DRIVER P: Jochen Friedrich @@ -1819,6 +2189,7 @@ M: jochen@scram.de L: linuxppc-dev@ozlabs.org L: linux-i2c@vger.kernel.org S: Maintained +F: drivers/i2c/busses/i2c-cpm.c FREESCALE IMX / MXC FRAMEBUFFER DRIVER P: Sascha Hauer @@ -1826,6 +2197,8 @@ M: kernel@pengutronix.de L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +F: arch/arm/plat-mxc/include/mach/imxfb.h +F: drivers/video/imxfb.c FREESCALE SOC FS_ENET DRIVER P: Pantelis Antoniou @@ -1835,12 +2208,16 @@ M: vbordug@ru.mvista.com L: linuxppc-dev@ozlabs.org L: netdev@vger.kernel.org S: Maintained +F: drivers/net/fs_enet/ +F: include/linux/fs_enet_pd.h FREESCALE QUICC ENGINE LIBRARY P: Timur Tabi M: timur@freescale.com L: linuxppc-dev@ozlabs.org S: Supported +F: arch/powerpc/sysdev/qe_lib/ +F: arch/powerpc/include/asm/*qe.h FREESCALE HIGHSPEED USB DEVICE DRIVER P: Li Yang @@ -1848,6 +2225,7 @@ M: leoli@freescale.com L: linux-usb@vger.kernel.org L: linuxppc-dev@ozlabs.org S: Maintained +F: drivers/usb/gadget/fsl_usb2_udc.c FREESCALE QUICC ENGINE UCC ETHERNET DRIVER P: Li Yang @@ -1855,12 +2233,14 @@ M: leoli@freescale.com L: netdev@vger.kernel.org L: linuxppc-dev@ozlabs.org S: Maintained +F: drivers/net/ucc_geth* FREESCALE QUICC ENGINE UCC UART DRIVER P: Timur Tabi M: timur@freescale.com L: linuxppc-dev@ozlabs.org S: Supported +F: drivers/serial/ucc_uart.c FREESCALE SOC SOUND DRIVERS P: Timur Tabi @@ -1868,12 +2248,14 @@ M: timur@freescale.com L: alsa-devel@alsa-project.org L: linuxppc-dev@ozlabs.org S: Supported +F: sound/soc/fsl/ FREEVXFS FILESYSTEM P: Christoph Hellwig M: hch@infradead.org W: ftp://ftp.openlinux.org/pub/people/hch/vxfs S: Maintained +F: fs/freevxfs/ FREEZER P: Pavel Machek @@ -1882,22 +2264,33 @@ P: Rafael J. Wysocki M: rjw@sisk.pl L: linux-pm@lists.linux-foundation.org S: Supported +F: Documentation/power/freezing-of-tasks.txt +F: include/linux/freezer.h +F: kernel/freezer.c FTRACE P: Steven Rostedt M: rostedt@goodmis.org S: Maintained +F: Documentation/ftrace.txt +F: arch/*/*/*/ftrace.h +F: arch/*/kernel/ftrace.c +F: include/*/ftrace.h +F: kernel/trace/ FUJITSU FR-V (FRV) PORT P: David Howells M: dhowells@redhat.com S: Maintained +F: arch/frv/ +F: include/asm-frv/ FUJITSU LAPTOP EXTRAS P: Jonathan Woithe M: jwoithe@physics.adelaide.edu.au L: linux-acpi@vger.kernel.org S: Maintained +F: drivers/platform/x86/fujitsu-laptop.c FUSE: FILESYSTEM IN USERSPACE P: Miklos Szeredi @@ -1905,12 +2298,15 @@ M: miklos@szeredi.hu L: fuse-devel@lists.sourceforge.net W: http://fuse.sourceforge.net/ S: Maintained +F: fs/fuse/ +F: include/linux/fuse.h FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit) P: Rik Faith M: faith@cs.unc.edu L: linux-scsi@vger.kernel.org S: Odd Fixes (e.g., new signatures) +F: drivers/scsi/fdomain.* GDT SCSI DISK ARRAY CONTROLLER DRIVER P: Achim Leubner @@ -1918,17 +2314,27 @@ M: achim_leubner@adaptec.com L: linux-scsi@vger.kernel.org W: http://www.icp-vortex.com/ S: Supported +F: drivers/scsi/gdt* GENERIC GPIO I2C DRIVER P: Haavard Skinnemoen M: hskinnemoen@atmel.com S: Supported +F: drivers/i2c/busses/i2c-gpio.c +F: include/linux/i2c-gpio.h GENERIC HDLC (WAN) DRIVERS P: Krzysztof Halasa M: khc@pm.waw.pl W: http://www.kernel.org/pub/linux/utils/net/hdlc/ S: Maintained +F: drivers/net/wan/c101.c +F: drivers/net/wan/hd6457* +F: drivers/net/wan/hdlc* +F: drivers/net/wan/n2.c +F: drivers/net/wan/pc300too.c +F: drivers/net/wan/pci200syn.c +F: drivers/net/wan/wanxl* GFS2 FILE SYSTEM P: Steven Whitehouse @@ -1938,6 +2344,9 @@ W: http://sources.redhat.com/cluster/ T: git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git T: git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw.git S: Supported +F: Documentation/filesystems/gfs2*.txt +F: fs/gfs2/ +F: include/linux/gfs2_ondisk.h GIGASET ISDN DRIVERS P: Hansjoerg Lipp @@ -1947,6 +2356,9 @@ M: tilman@imap.cc L: gigaset307x-common@lists.sourceforge.net W: http://gigaset307x.sourceforge.net/ S: Maintained +F: Documentation/isdn/README.gigaset +F: drivers/isdn/gigaset/ +F: include/linux/gigaset_dev.h HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER P: Frank Seidel @@ -1954,6 +2366,7 @@ M: frank@f-seidel.de L: lm-sensors@lm-sensors.org W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/ S: Maintained +F: drivers/hwmon/hdaps.c HYPERVISOR VIRTUAL CONSOLE DRIVER L: linuxppc-dev@ozlabs.org @@ -1967,6 +2380,7 @@ M: frank@zago.net L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: drivers/media/video/gspca/finepix.c GSPCA M5602 SUBDRIVER P: Erik Andren @@ -1974,6 +2388,7 @@ M: erik.andren@gmail.com L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: drivers/media/video/gspca/m5602/ GSPCA PAC207 SONIXB SUBDRIVER P: Hans de Goede @@ -1981,6 +2396,7 @@ M: hdegoede@redhat.com L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: drivers/media/video/gspca/pac207.c GSPCA T613 SUBDRIVER P: Leandro Costantino @@ -1988,6 +2404,7 @@ M: lcostantino@gmail.com L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: drivers/media/video/gspca/t613.c GSPCA USB WEBCAM DRIVER P: Jean-Francois Moine @@ -1996,20 +2413,26 @@ W: http://moinejf.free.fr L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: drivers/media/video/gspca/ HARDWARE MONITORING L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ S: Orphan +F: drivers/hwmon/ HARDWARE RANDOM NUMBER GENERATOR CORE S: Orphan +F: Documentation/hw_random.txt +F: drivers/char/hw_random/ +F: include/linux/hw_random.h HARMONY SOUND DRIVER P: Kyle McMartin M: kyle@mcmartin.ca L: linux-parisc@vger.kernel.org S: Maintained +F: sound/parisc/harmony.* HAYES ESP SERIAL DRIVER P: Andrew J. Robinson @@ -2017,6 +2440,8 @@ M: arobinso@nyx.net L: linux-kernel@vger.kernel.org W: http://www.nyx.net/~arobinso S: Maintained +F: Documentation/serial/hayes-esp.txt +F: drivers/char/esp.c HEWLETT-PACKARD FIBRE CHANNEL 64-bit/66MHz PCI non-intelligent HBA P: Chirag Kantharia @@ -2029,18 +2454,25 @@ P: Chirag Kantharia M: chirag.kantharia@hp.com L: iss_storagedev@hp.com S: Maintained +F: Documentation/blockdev/cpqarray.txt +F: drivers/block/cpqarray.* HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss) P: Mike Miller M: mike.miller@hp.com L: iss_storagedev@hp.com S: Supported +F: Documentation/blockdev/cciss.txt +F: drivers/block/cciss* +F: include/linux/cciss_ioctl.h HFS FILESYSTEM P: Roman Zippel M: zippel@linux-m68k.org L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/filesystems/hfs.txt +F: fs/hfs/ HGA FRAMEBUFFER DRIVER P: Ferenc Bakonyi @@ -2048,6 +2480,7 @@ M: fero@drama.obuda.kando.hu L: linux-nvidia@lists.surfsouth.com W: http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml S: Maintained +F: drivers/video/hgafb.c HIBERNATION (aka Software Suspend, aka swsusp) P: Pavel Machek @@ -2056,6 +2489,14 @@ P: Rafael J. Wysocki M: rjw@sisk.pl L: linux-pm@lists.linux-foundation.org S: Supported +F: arch/x86/power/ +F: drivers/base/power/ +F: kernel/power/ +F: include/linux/suspend.h +F: include/linux/freezer.h +F: include/linux/pm.h +F: include/asm-*/suspend*.h +F: arch/*/include/asm/suspend*.h HID CORE LAYER P: Jiri Kosina @@ -2063,12 +2504,17 @@ M: jkosina@suse.cz L: linux-input@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained +F: drivers/hid/ +F: include/linux/hid* HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS P: Thomas Gleixner M: tglx@linutronix.de L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/timers/ +F: kernel/hrtimer.c +F: include/linux/hrtimer.h HIGH-SPEED SCC DRIVER FOR AX.25 P: Klaus Kudielka @@ -2076,18 +2522,25 @@ M: klaus.kudielka@ieee.org L: linux-hams@vger.kernel.org W: http://www.nt.tuwien.ac.at/~kkudielk/Linux/ S: Maintained +F: drivers/net/hamradio/dmascc.c +F: drivers/net/hamradio/scc.c HIGHPOINT ROCKETRAID 3xxx RAID DRIVER P: HighPoint Linux Team M: linux@highpoint-tech.com W: http://www.highpoint-tech.com S: Supported +F: Documentation/scsi/hptiop.txt +F: drivers/scsi/hptiop.c HIPPI P: Jes Sorensen M: jes@trained-monkey.org L: linux-hippi@sunsite.dk S: Maintained +F: include/linux/hippidevice.h +F: include/linux/if_hippi.h +F: net/802/hippi.c HOST AP DRIVER P: Jouni Malinen @@ -2096,26 +2549,34 @@ L: hostap@shmoo.com (subscribers-only) L: linux-wireless@vger.kernel.org W: http://hostap.epitest.fi/ S: Maintained +F: drivers/net/wireless/hostap/ HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER P: Carlos Corbacho M: carlos@strangeworlds.co.uk S: Odd Fixes +F: drivers/platform/x86/tc1100-wmi.c HP100: Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series P: Jaroslav Kysela M: perex@perex.cz S: Maintained +F: drivers/net/hp100.* HPET: High Precision Event Timers driver (drivers/char/hpet.c) P: Clemens Ladisch M: clemens@ladisch.de S: Maintained +F: Documentation/timers/hpet.txt +F: drivers/char/hpet.c +F: include/linux/hpet.h HPET: i386 P: Venkatesh Pallipadi (Venki) M: venkatesh.pallipadi@intel.com S: Maintained +F: arch/x86/kernel/hpet.c +F: arch/x86/include/asm/hpet.h HPET: x86_64 P: Vojtech Pavlik @@ -2126,35 +2587,41 @@ HPET: ACPI hpet.c P: Bob Picco M: bob.picco@hp.com S: Maintained +F: drivers/char/hpet.c HPFS FILESYSTEM P: Mikulas Patocka M: mikulas@artax.karlin.mff.cuni.cz W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi S: Maintained +F: fs/hpfs/ HSO 3G Modem Driver (hso.c) P: Denis Joseph Barrow M: d.barow@option.com W: http://www.pharscape.org S: Maintained +F: drivers/net/usb/hso.c HTCPEN TOUCHSCREEN DRIVER P: Pau Oliva Fora M: pof@eslack.org L: linux-input@vger.kernel.org S: Maintained +F: drivers/input/touchscreen/htcpen.c HUGETLB FILESYSTEM P: William Irwin M: wli@holomorphy.com S: Maintained +F: fs/hugetlbfs/ I2C/SMBUS STUB DRIVER P: Mark M. Hoffman M: mhoffman@lightlink.com L: linux-i2c@vger.kernel.org S: Maintained +F: drivers/i2c/busses/i2c-stub.c I2C SUBSYSTEM P: Jean Delvare (PC drivers, core) @@ -2165,6 +2632,11 @@ L: linux-i2c@vger.kernel.org W: http://i2c.wiki.kernel.org/ T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/ S: Maintained +F: Documentation/i2c/ +F: drivers/i2c/ +F: include/linux/i2c.h +F: include/linux/i2c-dev.h +F: include/linux/i2c-id.h I2C-TINY-USB DRIVER P: Till Harbaum @@ -2172,12 +2644,14 @@ M: till@harbaum.org L: linux-i2c@vger.kernel.org T: http://www.harbaum.org/till/i2c_tiny_usb S: Maintained +F: drivers/i2c/busses/i2c-tiny-usb.c i386 BOOT CODE P: H. Peter Anvin M: hpa@zytor.com L: Linux-Kernel@vger.kernel.org S: Maintained +F: arch/x86/boot/ i386 SETUP CODE / CPU ERRATA WORKAROUNDS P: H. Peter Anvin @@ -2192,17 +2666,20 @@ L: linux-ia64@vger.kernel.org W: http://www.ia64-linux.org/ T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git S: Maintained +F: arch/ia64/ IBM MCA SCSI SUBSYSTEM DRIVER P: Michael Lang M: langa2@kph.uni-mainz.de W: http://www.uni-mainz.de/~langm000/linux.html S: Maintained +F: drivers/scsi/ibmmca.c IBM Power Linux RAID adapter P: Brian King M: brking@us.ibm.com S: Supported +F: drivers/scsi/ipr.* IBM ServeRAID RAID DRIVER P: Jack Hammer @@ -2210,6 +2687,7 @@ P: Dave Jeffery M: ipslinux@adaptec.com W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html S: Supported +F: drivers/scsi/ips.* IDE SUBSYSTEM P: Bartlomiej Zolnierkiewicz @@ -2217,18 +2695,24 @@ M: bzolnier@gmail.com L: linux-ide@vger.kernel.org T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/ S: Maintained +F: Documentation/ide/ +F: drivers/ide/ +F: include/linux/ide.h IDE/ATAPI DRIVERS P: Borislav Petkov M: petkovbb@gmail.com L: linux-ide@vger.kernel.org S: Maintained +F: Documentation/cdrom/ide-cd +F: drivers/ide/ide-cd* IDLE-I7300 P: Andy Henroid M: andrew.d.henroid@intel.com L: linux-pm@lists.linux-foundation.org S: Supported +F: drivers/idle/i7300_idle.c IEEE 1394 SUBSYSTEM (drivers/ieee1394) P: Ben Collins @@ -2239,6 +2723,7 @@ L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git S: Maintained +F: drivers/ieee1394/ IEEE 1394 RAW I/O DRIVER (raw1394) P: Dan Dennedy @@ -2247,15 +2732,18 @@ P: Stefan Richter M: stefanr@s5r6.in-berlin.de L: linux1394-devel@lists.sourceforge.net S: Maintained +F: drivers/ieee1394/raw1394* INTEGRITY MEASUREMENT ARCHITECTURE (IMA) P: Mimi Zohar M: zohar@us.ibm.com S: Supported +F: security/integrity/ima/ IMS TWINTURBO FRAMEBUFFER DRIVER L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Orphan +F: drivers/video/imsttfb.c INFINIBAND SUBSYSTEM P: Roland Dreier @@ -2268,6 +2756,9 @@ L: general@lists.openfabrics.org (moderated for non-subscribers) W: http://www.openib.org/ T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git S: Supported +F: Documentation/infiniband/ +F: drivers/infiniband/ +F: include/linux/if_infiniband.h INOTIFY P: John McCutchan @@ -2276,6 +2767,9 @@ P: Robert Love M: rlove@rlove.org L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/filesystems/inotify.txt +F: fs/notify/inotify/ +F: include/linux/inotify.h INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS P: Dmitry Torokhov @@ -2284,18 +2778,22 @@ M: dtor@mail.ru L: linux-input@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git S: Maintained +F: drivers/input/ INTEL FRAMEBUFFER DRIVER (excluding 810 and 815) P: Sylvain Meyer M: sylvain.meyer@worldonline.fr L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: Documentation/fb/intelfb.txt +F: drivers/video/intelfb/ INTEL 810/815 FRAMEBUFFER DRIVER P: Antonino Daplas M: adaplas@gmail.com L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: drivers/video/i810/ INTEL MENLOW THERMAL DRIVER P: Sujith Thomas @@ -2303,17 +2801,21 @@ M: sujith.thomas@intel.com L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported +F: drivers/platform/x86/intel_menlow.c INTEL IA32 MICROCODE UPDATE SUPPORT P: Tigran Aivazian M: tigran@aivazian.fsnet.co.uk S: Maintained +F: arch/x86/kernel/microcode_core.c +F: arch/x86/kernel/microcode_intel.c INTEL I/OAT DMA DRIVER P: Maciej Sosnowski M: maciej.sosnowski@intel.com L: linux-kernel@vger.kernel.org S: Supported +F: drivers/dma/ioat* INTEL IOMMU (VT-d) P: David Woodhouse @@ -2321,28 +2823,39 @@ M: dwmw2@infradead.org L: iommu@lists.linux-foundation.org T: git://git.infradead.org/iommu-2.6.git S: Supported +F: drivers/pci/intel-iommu.c +F: include/linux/intel-iommu.h INTEL IOP-ADMA DMA DRIVER P: Dan Williams M: dan.j.williams@intel.com L: linux-kernel@vger.kernel.org S: Supported +F: drivers/dma/iop-adma.c INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT P: Krzysztof Halasa M: khc@pm.waw.pl S: Maintained +F: arch/arm/mach-ixp4xx/include/mach/qmgr.h +F: arch/arm/mach-ixp4xx/include/mach/npe.h +F: arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +F: arch/arm/mach-ixp4xx/ixp4xx_npe.c +F: drivers/net/arm/ixp4xx_eth.c +F: drivers/net/wan/ixp4xx_hss.c INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT P: Deepak Saxena M: dsaxena@plexity.net S: Maintained +F: drivers/char/hw_random/ixp4xx-rng.c INTEL IXP2000 ETHERNET DRIVER P: Lennert Buytenhek M: kernel@wantstofly.org L: netdev@vger.kernel.org S: Maintained +F: drivers/net/ixp2000/ INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe) P: Jeff Kirsher @@ -2358,6 +2871,12 @@ M: john.ronciak@intel.com L: e1000-devel@lists.sourceforge.net W: http://e1000.sourceforge.net/ S: Supported +F: drivers/net/e100.c +F: drivers/net/e1000/ +F: drivers/net/e1000e/ +F: drivers/net/igb/ +F: drivers/net/ixgb/ +F: drivers/net/ixgbe/ INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT P: Zhu Yi @@ -2371,6 +2890,8 @@ L: ipw2100-devel@lists.sourceforge.net W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel W: http://ipw2100.sourceforge.net S: Supported +F: Documentation/networking/README.ipw2100 +F: drivers/net/wireless/ipw2x00/ipw2100.* INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT P: Zhu Yi @@ -2384,6 +2905,8 @@ L: ipw2100-devel@lists.sourceforge.net W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel W: http://ipw2200.sourceforge.net S: Supported +F: Documentation/networking/README.ipw2200 +F: drivers/net/wireless/ipw2x00/ipw2200.* INTEL WIRELESS WIMAX CONNECTION 2400 P: Inaky Perez-Gonzalez @@ -2392,6 +2915,9 @@ M: linux-wimax@intel.com L: wimax@linuxwimax.org S: Supported W: http://linuxwimax.org +F: Documentation/wimax/README.i2400m +F: drivers/net/wimax/i2400m/ +F: include/linux/wimax/i2400m.h INTEL WIRELESS WIFI LINK (iwlwifi) P: Zhu Yi @@ -2403,23 +2929,27 @@ L: ipw3945-devel@lists.sourceforge.net W: http://intellinuxwireless.org T: git kernel.org:/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git S: Supported +F: drivers/net/wireless/iwlwifi/ IOC3 ETHERNET DRIVER P: Ralf Baechle M: ralf@linux-mips.org L: linux-mips@linux-mips.org S: Maintained +F: drivers/net/ioc3-eth.c IOC3 SERIAL DRIVER P: Pat Gefre M: pfg@sgi.com L: linux-mips@linux-mips.org S: Maintained +F: drivers/serial/ioc3_serial.c IP MASQUERADING P: Juanjo Ciarlante M: jjciarla@raiz.uncu.edu.ar S: Maintained +F: net/ipv4/netfilter/ipt_MASQUERADE.c IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER P: Francois Romieu @@ -2430,6 +2960,7 @@ P: Jesse Huang M: jesse@icplus.com.tw L: netdev@vger.kernel.org S: Maintained +F: drivers/net/ipg.c IPATH DRIVER P: Ralph Campbell @@ -2437,6 +2968,7 @@ M: infinipath@qlogic.com L: general@lists.openfabrics.org T: git git://git.qlogic.com/ipath-linux-2.6 S: Supported +F: drivers/infiniband/hw/ipath/ IPMI SUBSYSTEM P: Corey Minyard @@ -2444,6 +2976,9 @@ M: minyard@acm.org L: openipmi-developer@lists.sourceforge.net W: http://openipmi.sourceforge.net/ S: Supported +F: Documentation/IPMI.txt +F: drivers/char/ipmi/ +F: include/linux/ipmi* IPS SCSI RAID DRIVER P: Adaptec OEM Raid Solutions @@ -2451,6 +2986,7 @@ M: aacraid@adaptec.com L: linux-scsi@vger.kernel.org W: http://www.adaptec.com/ S: Maintained +F: drivers/scsi/ips* IPVS P: Wensong Zhang @@ -2462,6 +2998,8 @@ M: ja@ssi.bg L: netdev@vger.kernel.org L: lvs-devel@vger.kernel.org S: Maintained +F: Documentation/networking/ipvs-sysctl.txt +F: net/netfilter/ipvs/ IPWIRELESS DRIVER P: Jiri Kosina @@ -2470,12 +3008,16 @@ P: David Sterba M: dsterba@suse.cz S: Maintained T: git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git +F: drivers/char/pcmcia/ipwireless/ IPX NETWORK LAYER P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net L: netdev@vger.kernel.org S: Maintained +F: include/linux/ipx.h +F: include/net/ipx.h +F: net/ipx/ IRDA SUBSYSTEM P: Samuel Ortiz @@ -2483,11 +3025,18 @@ M: samuel@sortiz.org L: irda-users@lists.sourceforge.net (subscribers-only) W: http://irda.sourceforge.net/ S: Maintained +F: Documentation/networking/irda.txt +F: drivers/net/irda/ +F: include/net/irda/ +F: net/irda/ ISAPNP P: Jaroslav Kysela M: perex@perex.cz S: Maintained +F: Documentation/isapnp.txt +F: drivers/pnp/isapnp/ +F: include/linux/isapnp.h ISCSI P: Mike Christie @@ -2496,6 +3045,8 @@ L: open-iscsi@googlegroups.com W: www.open-iscsi.org T: git kernel.org:/pub/scm/linux/kernel/mnc/linux-2.6-iscsi.git S: Maintained +F: drivers/scsi/*iscsi* +F: include/scsi/*iscsi* ISDN SUBSYSTEM P: Karsten Keil @@ -2504,6 +3055,10 @@ L: isdn4linux@listserv.isdn4linux.de (subscribers-only) W: http://www.isdn4linux.de T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git S: Maintained +F: Documentation/isdn/ +F: drivers/isdn/ +F: include/linux/isdn.h +F: include/linux/isdn/ ISDN SUBSYSTEM (Eicon active card driver) P: Armin Schindler @@ -2511,6 +3066,7 @@ M: mac@melware.de L: isdn4linux@listserv.isdn4linux.de (subscribers-only) W: http://www.melware.de S: Maintained +F: drivers/isdn/hardware/eicon/ IVTV VIDEO4LINUX DRIVER P: Hans Verkuil @@ -2521,6 +3077,9 @@ L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.ivtvdriver.org S: Maintained +F: Documentation/video4linux/*.ivtv +F: drivers/media/video/ivtv/ +F: include/linux/ivtv* JFS FILESYSTEM P: Dave Kleikamp @@ -2529,12 +3088,15 @@ L: jfs-discussion@lists.sourceforge.net W: http://jfs.sourceforge.net/ T: git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git S: Supported +F: Documentation/filesystems/jfs.txt +F: fs/jfs/ JME NETWORK DRIVER P: Guo-Fu Tseng M: cooldavid@cooldavid.org L: netdev@vger.kernel.org S: Maintained +F: drivers/net/jme.* JOURNALLING FLASH FILE SYSTEM V2 (JFFS2) P: David Woodhouse @@ -2542,24 +3104,34 @@ M: dwmw2@infradead.org L: linux-mtd@lists.infradead.org W: http://www.linux-mtd.infradead.org/doc/jffs2.html S: Maintained +F: fs/jffs2/ +F: include/linux/jffs2.h +F: include/mtd/jffs2-user.h JOURNALLING LAYER FOR BLOCK DEVICES (JBD) P: Stephen Tweedie, Andrew Morton M: sct@redhat.com, akpm@linux-foundation.org L: linux-ext4@vger.kernel.org S: Maintained +F: fs/jbd*/ +F: include/linux/ext*jbd*.h +F: include/linux/jbd*.h K8TEMP HARDWARE MONITORING DRIVER P: Rudolf Marek M: r.marek@assembler.cz L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/k8temp +F: drivers/hwmon/k8temp.c KCONFIG P: Roman Zippel M: zippel@linux-m68k.org L: linux-kbuild@vger.kernel.org S: Maintained +F: Documentation/kbuild/kconfig-language.txt +F: scripts/kconfig/ KDUMP P: Vivek Goyal @@ -2570,18 +3142,21 @@ L: kexec@lists.infradead.org L: linux-kernel@vger.kernel.org W: http://lse.sourceforge.net/kdump/ S: Maintained +F: Documentation/kdump KERNEL AUTOMOUNTER (AUTOFS) P: H. Peter Anvin M: hpa@zytor.com L: autofs@linux.kernel.org S: Odd Fixes +F: fs/autofs/ KERNEL AUTOMOUNTER v4 (AUTOFS4) P: Ian Kent M: raven@themaw.net L: autofs@linux.kernel.org S: Maintained +F: fs/autofs4/ KERNEL BUILD (kbuild: Makefile, scripts/Makefile.*) P: Sam Ravnborg @@ -2590,6 +3165,9 @@ T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-next.git T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-fixes.git L: linux-kbuild@vger.kernel.org S: Maintained +F: Documentation/kbuild/ +F: Makefile +F: scripts/Makefile.* KERNEL JANITORS P: Several @@ -2605,6 +3183,13 @@ M: neilb@suse.de L: linux-nfs@vger.kernel.org W: http://nfs.sourceforge.net/ S: Supported +F: fs/nfsd/ +F: include/linux/nfsd/ +F: fs/lockd/ +F: fs/nfs_common/ +F: net/sunrpc/ +F: include/linux/lockd/ +F: include/linux/sunrpc/ KERNEL VIRTUAL MACHINE (KVM) P: Avi Kivity @@ -2612,6 +3197,11 @@ M: avi@redhat.com L: kvm@vger.kernel.org W: http://kvm.qumranet.com S: Supported +F: Documentation/*/kvm.txt +F: arch/*/kvm/ +F: arch/*/include/asm/kvm* +F: include/linux/kvm* +F: virt/kvm/ KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V P: Joerg Roedel @@ -2619,6 +3209,9 @@ M: joerg.roedel@amd.com L: kvm@vger.kernel.org W: http://kvm.qumranet.com S: Supported +F: arch/x86/include/asm/svm.h +F: arch/x86/kvm/kvm_svm.h +F: arch/x86/kvm/svm.c KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC P: Hollis Blanchard @@ -2626,6 +3219,8 @@ M: hollisb@us.ibm.com L: kvm-ppc@vger.kernel.org W: http://kvm.qumranet.com S: Supported +F: arch/powerpc/include/asm/kvm* +F: arch/powerpc/kvm/ KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64) P: Xiantao Zhang @@ -2633,6 +3228,9 @@ M: xiantao.zhang@intel.com L: kvm-ia64@vger.kernel.org W: http://kvm.qumranet.com S: Supported +F: Documentation/ia64/kvm.txt +F: arch/ia64/include/asm/kvm* +F: arch/ia64/kvm/ KERNEL VIRTUAL MACHINE for s390 (KVM/s390) P: Carsten Otte @@ -2643,6 +3241,9 @@ M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported +F: Documentation/s390/kvm.txt +F: arch/s390/include/asm/kvm* +F: arch/s390/kvm KEXEC P: Eric Biederman @@ -2651,18 +3252,28 @@ W: http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/ L: linux-kernel@vger.kernel.org L: kexec@lists.infradead.org S: Maintained +F: include/linux/kexec.h +F: kernel/kexec.c KGDB P: Jason Wessel M: jason.wessel@windriver.com L: kgdb-bugreport@lists.sourceforge.net S: Maintained +F: Documentation/DocBook/kgdb.tmpl +F: drivers/misc/kgdbts.c +F: drivers/serial/kgdboc.c +F: include/linux/kgdb.h +F: kernel/kgdb.c KMEMTRACE P: Eduard - Gabriel Munteanu M: eduard.munteanu@linux360.ro L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/vm/kmemtrace.txt +F: include/trace/kmemtrace.h +F: kernel/trace/kmemtrace.c KPROBES P: Ananth N Mavinakayanahalli @@ -2675,6 +3286,9 @@ P: Masami Hiramatsu M: mhiramat@redhat.com L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/kprobes.txt +F: include/linux/kprobes.h +F: kernel/kprobes.c KS0108 LCD CONTROLLER DRIVER P: Miguel Ojeda Sandonis @@ -2683,21 +3297,31 @@ L: linux-kernel@vger.kernel.org W: http://miguelojeda.es/auxdisplay.htm W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained +F: Documentation/auxdisplay/ks0108 +F: drivers/auxdisplay/ks0108.c +F: include/linux/ks0108.h LAPB module L: linux-x25@vger.kernel.org S: Orphan +F: Documentation/networking/lapb-module.txt +F: include/*/lapb.h +F: net/lapb/ LASI 53c700 driver for PARISC P: James E.J. Bottomley M: James.Bottomley@HansenPartnership.com L: linux-scsi@vger.kernel.org S: Maintained +F: Documentation/scsi/53c700.txt +F: drivers/scsi/53c700* LED SUBSYSTEM P: Richard Purdie M: rpurdie@rpsys.net S: Maintained +F: drivers/leds/ +F: include/linux/leds.h LEGO USB Tower driver P: Juergen Stuber @@ -2705,6 +3329,7 @@ M: starblue@users.sourceforge.net L: legousb-devel@lists.sourceforge.net W: http://legousb.sourceforge.net/ S: Maintained +F: drivers/usb/misc/legousbtower.c LGUEST P: Rusty Russell @@ -2712,6 +3337,11 @@ M: rusty@rustcorp.com.au L: lguest@ozlabs.org W: http://lguest.ozlabs.org/ S: Maintained +F: Documentation/lguest/ +F: arch/x86/lguest/ +F: drivers/lguest/ +F: include/linux/lguest*.h +F: arch/x86/include/asm/lguest*.h LINUX FOR IBM pSERIES (RS/6000) P: Paul Mackerras @@ -2801,23 +3431,32 @@ LLC (802.2) P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net S: Maintained +F: include/linux/llc.h +F: include/net/llc* +F: net/llc/ LIS3LV02D ACCELEROMETER DRIVER P: Eric Piel M: eric.piel@tremplin-utc.net S: Maintained +F: Documentation/hwmon/lis3lv02d +F: drivers/hwmon/lis3lv02d.* LM83 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/lm83 +F: drivers/hwmon/lm83.c LM90 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/lm90 +F: drivers/hwmon/lm90.c LOCKDEP AND LOCKSTAT P: Peter Zijlstra @@ -2827,6 +3466,10 @@ M: mingo@redhat.com L: linux-kernel@vger.kernel.org T: git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git S: Maintained +F: Documentation/lockdep*.txt +F: Documentation/lockstat.txt +F: include/linux/lockdep.h +F: kernel/lockdep* LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks) P: Richard Russon (FlatCap) @@ -2834,6 +3477,8 @@ M: ldm@flatcap.org L: linux-ntfs-dev@lists.sourceforge.net W: http://www.linux-ntfs.org/content/view/19/37/ S: Maintained +F: Documentation/ldm.txt +F: fs/partitions/ldm.* LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) P: Eric Moore @@ -2843,12 +3488,14 @@ L: DL-MPTFusionLinux@lsi.com L: linux-scsi@vger.kernel.org W: http://www.lsilogic.com/support S: Supported +F: drivers/message/fusion/ LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers P: Matthew Wilcox M: matthew@wil.cx L: linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/sym53c8xx_2/ LTP (Linux Test Project) P: Subrata Modak @@ -2867,6 +3514,8 @@ L: linux-m32r@ml.linux-m32r.org L: linux-m32r-ja@ml.linux-m32r.org (in Japanese) W: http://www.linux-m32r.org/ S: Maintained +F: arch/m32r/ +F: include/asm-m32r/ M68K ARCHITECTURE P: Geert Uytterhoeven @@ -2877,6 +3526,7 @@ L: linux-m68k@lists.linux-m68k.org W: http://www.linux-m68k.org/ T: git git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git S: Maintained +F: arch/m68k/ M68K ON APPLE MACINTOSH P: Joshua Thompson @@ -2890,6 +3540,7 @@ P: Philip Blundell M: philb@gnu.org W: http://www.tazenda.demon.co.uk/phil/linux-hp S: Maintained +F: arch/m68k/hp300/ MAC80211 P: Johannes Berg @@ -2898,6 +3549,9 @@ L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git S: Maintained +F: Documentation/networking/mac80211-injection.txt +F: include/net/mac80211.h +F: net/mac80211/ MAC80211 PID RATE CONTROL P: Stefano Brivio @@ -2908,12 +3562,15 @@ L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git S: Maintained +F: net/mac80211/rc80211_pid* MACVLAN DRIVER P: Patrick McHardy M: kaber@trash.net L: netdev@vger.kernel.org S: Maintained +F: drivers/net/macvlan.c +F: include/linux/if_macvlan.h MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7 P: Michael Kerrisk @@ -2927,12 +3584,15 @@ P: Dan Williams M: dcbw@redhat.com L: libertas-dev@lists.infradead.org S: Maintained +F: drivers/net/wireless/libertas/ MARVELL MV643XX ETHERNET DRIVER P: Lennert Buytenhek M: buytenh@marvell.com L: netdev@vger.kernel.org S: Supported +F: drivers/net/mv643xx_eth.* +F: include/linux/mv643xx.h MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER P: Nicolas Pitre @@ -2953,12 +3613,16 @@ P: Petr Vandrovec M: vandrove@vc.cvut.cz L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: drivers/video/matrox/matroxfb_* +F: include/linux/matroxfb.h MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER P: Hans J. Koch M: hjk@linutronix.de L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/max6650 +F: drivers/hwmon/max6650.c MEGARAID SCSI DRIVERS P: Neela Syam Kolli @@ -2966,12 +3630,17 @@ M: megaraidlinux@lsi.com L: linux-scsi@vger.kernel.org W: http://megaraid.lsilogic.com S: Maintained +F: Documentation/scsi/megaraid.txt +F: drivers/scsi/megaraid.* +F: drivers/scsi/megaraid/ MEMORY MANAGEMENT L: linux-mm@kvack.org L: linux-kernel@vger.kernel.org W: http://www.linux-mm.org S: Maintained +F: include/linux/mm.h +F: mm/ MEMORY RESOURCE CONTROLLER P: Balbir Singh @@ -2983,6 +3652,7 @@ M: kamezawa.hiroyu@jp.fujitsu.com L: linux-mm@kvack.org L: linux-kernel@vger.kernel.org S: Maintained +F: mm/memcontrol.c MEMORY TECHNOLOGY DEVICES (MTD) P: David Woodhouse @@ -2991,11 +3661,15 @@ W: http://www.linux-mtd.infradead.org/ L: linux-mtd@lists.infradead.org T: git git://git.infradead.org/mtd-2.6.git S: Maintained +F: drivers/mtd/ +F: include/linux/mtd/ +F: include/mtd/ MICROTEK X6 SCANNER P: Oliver Neukum M: oliver@neukum.name S: Maintained +F: drivers/usb/image/microtek.* MIPS P: Ralf Baechle @@ -3004,42 +3678,58 @@ W: http://www.linux-mips.org/ L: linux-mips@linux-mips.org T: git www.linux-mips.org:/pub/scm/linux.git S: Supported +F: Documentation/mips/ +F: arch/mips/ MISCELLANEOUS MCA-SUPPORT P: James Bottomley M: James.Bottomley@HansenPartnership.com L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/ia64/mca.txt +F: Documentation/mca.txt +F: drivers/mca/ +F: include/linux/mca* MODULE SUPPORT P: Rusty Russell M: rusty@rustcorp.com.au L: linux-kernel@vger.kernel.org S: Maintained +F: include/linux/module.h +F: kernel/module.c MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER P: Stelian Pop M: stelian@popies.net W: http://popies.net/meye/ S: Maintained +F: Documentation/video4linux/meye.txt +F: drivers/media/video/meye.* +F: include/linux/meye.h MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER P: Pavel Pisa M: ppisa@pikron.com L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +F: drivers/mmc/host/imxmmc.* MOUSE AND MISC DEVICES [GENERAL] P: Alessandro Rubini M: rubini@ipvvis.unipv.it L: linux-kernel@vger.kernel.org S: Maintained +F: drivers/input/mouse/ +F: include/linux/gpio_mouse.h MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD P: Jiri Slaby M: jirislaby@gmail.com L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/serial/moxa-smartio +F: drivers/char/mxser.* MSI LAPTOP SUPPORT P: Lennart Poettering @@ -3047,6 +3737,7 @@ M: mzxreary@0pointer.de W: https://tango.0pointer.de/mailman/listinfo/s270-linux W: http://0pointer.de/lennart/tchibo.html S: Maintained +F: drivers/platform/x86/msi-laptop.c MULTIFUNCTION DEVICES (MFD) P: Samuel Ortiz @@ -3054,29 +3745,38 @@ M: sameo@linux.intel.com L: linux-kernel@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/sameo/mfd-2.6.git S: Supported +F: drivers/mfd/ MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM P: Pierre Ossman M: pierre@ossman.eu L: linux-kernel@vger.kernel.org S: Maintained +F: drivers/mmc/ +F: include/linux/mmc/ MULTIMEDIA CARD (MMC) ETC. OVER SPI P: David Brownell M: dbrownell@users.sourceforge.net L: linux-kernel@vger.kernel.org S: Odd Fixes +F: drivers/mmc/host/mmc_spi.c +F: include/linux/spi/mmc_spi.h MULTISOUND SOUND DRIVER P: Andrew Veliath M: andrewtv@usa.net S: Maintained +F: Documentation/sound/oss/MultiSound +F: sound/oss/msnd* MULTITECH MULTIPORT CARD (ISICOM) P: Jiri Slaby M: jirislaby@gmail.com L: linux-kernel@vger.kernel.org S: Maintained +F: drivers/char/isicom.c +F: include/linux/isicom.h MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER P: Felipe Balbi @@ -3084,6 +3784,7 @@ M: felipe.balbi@nokia.com L: linux-usb@vger.kernel.org T: git gitorious.org:/musb/mainline.git S: Maintained +F: drivers/usb/musb/ MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) P: Andrew Gallatin @@ -3093,23 +3794,27 @@ M: brice@myri.com L: netdev@vger.kernel.org W: http://www.myri.com/scs/download-Myri10GE.html S: Supported +F: drivers/net/myri10ge/ NATSEMI ETHERNET DRIVER (DP8381x) P: Tim Hockin M: thockin@hockin.org S: Maintained +F: drivers/net/natsemi.c NCP FILESYSTEM P: Petr Vandrovec M: vandrove@vc.cvut.cz L: linware@sh.cvut.cz S: Maintained +F: fs/ncpfs/ NCR DUAL 700 SCSI DRIVER (MICROCHANNEL) P: James E.J. Bottomley M: James.Bottomley@HansenPartnership.com L: linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/NCR_D700.* NETEFFECT IWARP RNIC DRIVER (IW_NES) P: Faisal Latif @@ -3126,6 +3831,7 @@ P: Stephen Hemminger M: shemminger@linux-foundation.org L: netem@lists.linux-foundation.org S: Maintained +F: net/sched/sch_netem.c NETERION (S2IO) 10GbE DRIVER (xframe/vxge) P: Ramkrishna Vepa @@ -3142,6 +3848,8 @@ L: netdev@vger.kernel.org W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous S: Supported +F: Documentation/networking/s2io.txt +F: drivers/net/s2io* NETFILTER/IPTABLES/IPCHAINS P: Rusty Russell @@ -3157,6 +3865,12 @@ L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ S: Supported +F: include/linux/netfilter* +F: include/linux/netfilter/ +F: include/net/netfilter/ +F: net/*/netfilter.c +F: net/*/netfilter/ +F: net/netfilter/ NETLABEL P: Paul Moore @@ -3164,6 +3878,9 @@ M: paul.moore@hp.com W: http://netlabel.sf.net L: netdev@vger.kernel.org S: Supported +F: Documentation/netlabel +F: include/net/netlabel.h +F: net/netlabel/ NETROM NETWORK LAYER P: Ralf Baechle @@ -3171,11 +3888,17 @@ M: ralf@linux-mips.org L: linux-hams@vger.kernel.org W: http://www.linux-ax25.org/ S: Maintained +F: include/linux/netrom.h +F: include/net/netrom.h +F: net/netrom/ NETWORK BLOCK DEVICE (NBD) P: Paul Clements M: Paul.Clements@steeleye.com S: Maintained +F: Documentation/blockdev/nbd.txt +F: drivers/block/nbd.c +F: include/linux/nbd.h NETWORK DEVICE DRIVERS P: Jeff Garzik @@ -3183,6 +3906,7 @@ M: jgarzik@pobox.com L: netdev@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git S: Maintained +F: drivers/net/ NETWORKING [GENERAL] P: Networking Team @@ -3190,6 +3914,8 @@ M: netdev@vger.kernel.org L: netdev@vger.kernel.org W: http://linux-net.osdl.org/ S: Maintained +F: net/ +F: include/net/ NETWORKING [IPv4/IPv6] P: David S. Miller @@ -3207,6 +3933,9 @@ M: kaber@trash.net L: netdev@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained +F: net/ipv4/ +F: net/ipv6/ +F: include/net/ip* NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK) P: Paul Moore @@ -3220,6 +3949,9 @@ M: linville@tuxdriver.com L: linux-wireless@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git S: Maintained +F: net/wireless/ +F: include/net/ieee80211* +F: include/net/wireless.h NETXEN (1/10) GbE SUPPORT P: Dhananjay Phadke @@ -3227,6 +3959,7 @@ M: dhananjay@netxen.com L: netdev@vger.kernel.org W: http://www.netxen.com S: Supported +F: drivers/net/netxen/ NFS, SUNRPC, AND LOCKD CLIENTS P: Trond Myklebust @@ -3235,6 +3968,13 @@ L: linux-nfs@vger.kernel.org W: http://client.linux-nfs.org T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git S: Maintained +F: fs/lockd/ +F: fs/nfs/ +F: fs/nfs_common/ +F: net/sunrpc/ +F: include/linux/lockd/ +F: include/linux/nfs* +F: include/linux/sunrpc/ NI5010 NETWORK DRIVER P: Jan-Pascal van Best @@ -3243,6 +3983,7 @@ P: Andreas Mohr M: andi@lisas.de L: netdev@vger.kernel.org S: Maintained +F: drivers/net/ni5010.* NILFS2 FILESYSTEM P: KONISHI Ryusuke @@ -3250,12 +3991,17 @@ M: konishi.ryusuke@lab.ntt.co.jp L: users@nilfs.org W: http://www.nilfs.org/en/ S: Supported +F: Documentation/filesystems/nilfs2.txt +F: fs/nilfs2/ +F: include/linux/nilfs2_fs.h NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER P: YOKOTA Hiroshi M: yokota@netlab.is.tsukuba.ac.jp W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/ S: Maintained +F: Documentation/scsi/NinjaSCSI.txt +F: drivers/scsi/pcmcia/nsp_* NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER P: GOTO Masanori @@ -3264,6 +4010,8 @@ P: YOKOTA Hiroshi M: yokota@netlab.is.tsukuba.ac.jp W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/ S: Maintained +F: Documentation/scsi/NinjaSCSI.txt +F: drivers/scsi/nsp32* NTFS FILESYSTEM P: Anton Altaparmakov @@ -3273,28 +4021,37 @@ L: linux-kernel@vger.kernel.org W: http://www.linux-ntfs.org/ T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git S: Maintained +F: Documentation/filesystems/ntfs.txt +F: fs/ntfs/ NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER P: Antonino Daplas M: adaplas@gmail.com L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: drivers/video/riva/ +F: drivers/video/nvidia/ OMFS FILESYSTEM P: Bob Copeland M: me@bobcopeland.com L: linux-karma-devel@lists.sourceforge.net S: Maintained +F: Documentation/filesystems/omfs.txt +F: fs/omfs/ OMNIKEY CARDMAN 4000 DRIVER P: Harald Welte M: laforge@gnumonks.org S: Maintained +F: drivers/char/pcmcia/cm4000_cs.c +F: include/linux/cm4000_cs.h OMNIKEY CARDMAN 4040 DRIVER P: Harald Welte M: laforge@gnumonks.org S: Maintained +F: drivers/char/pcmcia/cm4040_cs.* OMNIVISION OV7670 SENSOR DRIVER P: Jonathan Corbet @@ -3302,12 +4059,15 @@ M: corbet@lwn.net L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: drivers/media/video/ov7670.c ONENAND FLASH DRIVER P: Kyungmin Park M: kyungmin.park@samsung.com L: linux-mtd@lists.infradead.org S: Maintained +F: drivers/mtd/onenand/ +F: include/linux/mtd/onenand*.h ONSTREAM SCSI TAPE DRIVER P: Willem Riede @@ -3315,18 +4075,25 @@ M: osst@riede.org L: osst-users@lists.sourceforge.net L: linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/osst* +F: drivers/scsi/st* OPENCORES I2C BUS DRIVER P: Peter Korsgaard M: jacmet@sunsite.dk L: linux-i2c@vger.kernel.org S: Maintained +F: Documentation/i2c/busses/i2c-ocores +F: drivers/i2c/busses/i2c-ocores.c OPROFILE P: Robert Richter M: robert.richter@amd.com L: oprofile-list@lists.sf.net S: Maintained +F: arch/*/oprofile/ +F: drivers/oprofile/ +F: include/linux/oprofile.h ORACLE CLUSTER FILESYSTEM 2 (OCFS2) P: Mark Fasheh @@ -3337,6 +4104,9 @@ L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers) W: http://oss.oracle.com/projects/ocfs2/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git S: Supported +F: Documentation/filesystems/ocfs2.txt +F: Documentation/filesystems/dlmfs.txt +F: fs/ocfs2/ ORINOCO DRIVER P: Pavel Roskin @@ -3348,6 +4118,7 @@ L: orinoco-users@lists.sourceforge.net L: orinoco-devel@lists.sourceforge.net W: http://www.nongnu.org/orinoco/ S: Maintained +F: drivers/net/wireless/orinoco/ OSD LIBRARY P: Boaz Harrosh @@ -3366,23 +4137,27 @@ L: linux-wireless@vger.kernel.org W: http://prism54.org T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git S: Maintained +F: drivers/net/wireless/p54/ PA SEMI ETHERNET DRIVER P: Olof Johansson M: olof@lixom.net L: netdev@vger.kernel.org S: Maintained +F: drivers/net/pasemi_mac.* PA SEMI SMBUS DRIVER P: Olof Johansson M: olof@lixom.net L: linux-i2c@vger.kernel.org S: Maintained +F: drivers/i2c/busses/i2c-pasemi.c PANASONIC LAPTOP ACPI EXTRAS DRIVER P: Harald Welte M: laforge@gnumonks.org S: Maintained +F: drivers/platform/x86/panasonic-laptop.c PANASONIC MN10300/AM33 PORT P: David Howells @@ -3392,10 +4167,17 @@ M: yasutake.koichi@jp.panasonic.com L: linux-am33-list@redhat.com (moderated for non-subscribers) W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/ S: Maintained +F: Documentation/mn10300/ +F: arch/mn10300/ +F: include/asm-mn10300/ PARALLEL PORT SUPPORT L: linux-parport@lists.infradead.org (subscribers-only) S: Orphan +F: drivers/parport/ +F: include/linux/parport*.h +F: drivers/char/ppdev.c +F: include/linux/ppdev.h PARAVIRT_OPS INTERFACE P: Jeremy Fitzhardinge @@ -3409,6 +4191,9 @@ M: rusty@rustcorp.com.au L: virtualization@lists.osdl.org L: linux-kernel@vger.kernel.org S: Supported +F: Documentation/ia64/paravirt_ops.txt +F: arch/*/kernel/paravirt* +F: arch/*/include/asm/paravirt.h PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES P: Tim Waugh @@ -3416,6 +4201,8 @@ M: tim@cyberelk.net L: linux-parport@lists.infradead.org (subscribers-only) W: http://www.torque.net/linux-pp.html S: Maintained +F: Documentation/blockdev/paride.txt +F: drivers/block/paride/ PARISC ARCHITECTURE P: Kyle McMartin @@ -3426,17 +4213,22 @@ L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ T: git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git S: Maintained +F: arch/parisc/ +F: drivers/parisc/ PC87360 HARDWARE MONITORING DRIVER P: Jim Cromie M: jim.cromie@gmail.com L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/pc87360 +F: drivers/hwmon/pc87360.c PC8736x GPIO DRIVER P: Jim Cromie M: jim.cromie@gmail.com S: Maintained +F: drivers/char/pc8736x_gpio.c PCA9532 LED DRIVER P: Riku Voipio @@ -3449,6 +4241,8 @@ M: linas@austin.ibm.com L: linux-kernel@vger.kernel.org L: linux-pci@vger.kernel.org S: Supported +F: Documentation/PCI/pci-error-recovery.txt +F: Documentation/powerpc/eeh-pci-error-recovery.txt PCI SUBSYSTEM P: Jesse Barnes @@ -3457,12 +4251,16 @@ L: linux-kernel@vger.kernel.org L: linux-pci@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git S: Supported +F: Documentation/PCI/ +F: drivers/pci/ +F: include/linux/pci* PCIE HOTPLUG DRIVER P: Kristen Carlson Accardi M: kristen.c.accardi@intel.com L: linux-pci@vger.kernel.org S: Supported +F: drivers/pci/pcie/ PCMCIA SUBSYSTEM P: Linux PCMCIA Team @@ -3470,42 +4268,55 @@ L: linux-pcmcia@lists.infradead.org W: http://lists.infradead.org/mailman/listinfo/linux-pcmcia T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git S: Maintained +F: Documentation/pcmcia/ +F: drivers/pcmcia/ +F: include/pcmcia/ PCNET32 NETWORK DRIVER P: Don Fry M: pcnet32@verizon.net L: netdev@vger.kernel.org S: Maintained +F: drivers/net/pcnet32.c PER-TASK DELAY ACCOUNTING P: Balbir Singh M: balbir@linux.vnet.ibm.com L: linux-kernel@vger.kernel.org S: Maintained +F: include/linux/delayacct.h +F: kernel/delayacct.c PERSONALITY HANDLING P: Christoph Hellwig M: hch@infradead.org L: linux-abi-devel@lists.sourceforge.net S: Maintained +F: include/linux/personality.h PHRAM MTD DRIVER P: Joern Engel M: joern@lazybastard.org L: linux-mtd@lists.infradead.org S: Maintained +F: drivers/mtd/devices/phram.c PKTCDVD DRIVER P: Peter Osterlund M: petero2@telia.com L: linux-kernel@vger.kernel.org S: Maintained +F: drivers/block/pktcdvd.c +F: include/linux/pktcdvd.h POSIX CLOCKS and TIMERS P: Thomas Gleixner M: tglx@linutronix.de L: linux-kernel@vger.kernel.org S: Supported +F: fs/timerfd.c +F: include/linux/timer* +F: kernel/*timer* POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS P: Anton Vorontsov @@ -3515,6 +4326,8 @@ M: dwmw2@infradead.org L: linux-kernel@vger.kernel.org T: git git.infradead.org/battery-2.6.git S: Maintained +F: include/linux/power_supply.h +F: drivers/power/power_supply* PNP SUPPORT P: Adam Belay @@ -3522,33 +4335,42 @@ M: abelay@mit.edu P: Bjorn Helgaas M: bjorn.helgaas@hp.com S: Maintained +F: drivers/pnp/ PNXxxxx I2C DRIVER P: Vitaly Wool M: vitalywool@gmail.com L: linux-i2c@vger.kernel.org S: Maintained +F: drivers/i2c/busses/i2c-pnx.c PPP PROTOCOL DRIVERS AND COMPRESSORS P: Paul Mackerras M: paulus@samba.org L: linux-ppp@vger.kernel.org S: Maintained +F: drivers/net/ppp_* PPP OVER ATM (RFC 2364) P: Mitchell Blank Jr M: mitch@sfgoth.com S: Maintained +F: net/atm/pppoatm.c +F: include/linux/atmppp.h PPP OVER ETHERNET P: Michal Ostrowski M: mostrows@earthlink.net S: Maintained +F: drivers/net/pppoe.c +F: drivers/net/pppox.c PPP OVER L2TP P: James Chapman M: jchapman@katalix.com S: Maintained +F: drivers/net/pppol2tp.c +F: include/linux/if_pppol2tp.h PREEMPTIBLE KERNEL P: Robert Love @@ -3557,6 +4379,8 @@ L: linux-kernel@vger.kernel.org L: kpreempt-tech@lists.sourceforge.net W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel S: Supported +F: Documentation/preempt-locking.txt +F: include/linux/preempt.h PRISM54 WIRELESS DRIVER P: Luis R. Rodriguez @@ -3564,6 +4388,7 @@ M: mcgrof@gmail.com L: linux-wireless@vger.kernel.org W: http://prism54.org S: Maintained +F: drivers/net/wireless/prism54/ PROMISE DC4030 CACHING DISK CONTROLLER DRIVER P: Peter Denison @@ -3576,6 +4401,7 @@ P: Mikael Pettersson M: mikpe@it.uu.se L: linux-ide@vger.kernel.org S: Maintained +F: drivers/ata/sata_promise.* PS3 NETWORK SUPPORT P: Masakazu Mokuno @@ -3583,6 +4409,7 @@ M: mokuno@sm.sony.co.jp L: netdev@vger.kernel.org L: cbe-oss-dev@ozlabs.org S: Supported +F: drivers/net/ps3_gelic_net.* PS3 PLATFORM SUPPORT P: Geoff Levand @@ -3590,6 +4417,13 @@ M: geoffrey.levand@am.sony.com L: linuxppc-dev@ozlabs.org L: cbe-oss-dev@ozlabs.org S: Supported +F: arch/powerpc/boot/ps3* +F: arch/powerpc/include/asm/lv1call.h +F: arch/powerpc/include/asm/ps3*.h +F: arch/powerpc/platforms/ps3/ +F: drivers/*/ps3* +F: drivers/ps3/ +F: drivers/usb/host/*ps3.c PS3VRAM DRIVER P: Jim Paris @@ -3605,6 +4439,8 @@ L: linux-media@vger.kernel.org W: http://www.isely.net/pvrusb2/ T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: Documentation/video4linux/README.pvrusb2 +F: drivers/media/video/pvrusb2/ PXA2xx/PXA3xx SUPPORT P: Eric Miao @@ -3613,6 +4449,12 @@ P: Russell King M: linux@arm.linux.org.uk L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +F: arch/arm/mach-pxa/ +F: drivers/pcmcia/pxa2xx* +F: drivers/spi/pxa2xx* +F: drivers/usb/gadget/pxa2* +F: include/sound/pxa2xx-lib.h +F: sound/soc/pxa/pxa2xx* PXA168 SUPPORT P: Eric Miao @@ -3644,12 +4486,16 @@ P: Andrew Vasquez M: linux-driver@qlogic.com L: linux-scsi@vger.kernel.org S: Supported +F: Documentation/scsi/LICENSE.qla2xxx +F: drivers/scsi/qla2xxx/ QLOGIC QLA3XXX NETWORK DRIVER P: Ron Mercer M: linux-driver@qlogic.com L: netdev@vger.kernel.org S: Supported +F: Documentation/networking/LICENSE.qla3xxx +F: drivers/net/qla3xxx.* QLOGIC QLGE 10Gb ETHERNET DRIVER P: Ron Mercer @@ -3657,6 +4503,7 @@ M: linux-driver@qlogic.com M: ron.mercer@qlogic.com L: netdev@vger.kernel.org S: Supported +F: drivers/net/qlge/ QNX4 FILESYSTEM P: Anders Larsen @@ -3664,18 +4511,24 @@ M: al@alarsen.net L: linux-kernel@vger.kernel.org W: http://www.alarsen.net/linux/qnx4fs/ S: Maintained +F: fs/qnx4 +F: include/linux/qnx4_fs.h +F: include/linux/qnxtypes.h RADEON FRAMEBUFFER DISPLAY DRIVER P: Benjamin Herrenschmidt M: benh@kernel.crashing.org L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: drivers/video/aty/radeon* +F: include/linux/radeonfb.h RAGE128 FRAMEBUFFER DISPLAY DRIVER P: Paul Mackerras M: paulus@samba.org L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project @@ -3690,29 +4543,36 @@ RAMDISK RAM BLOCK DEVICE DRIVER P: Nick Piggin M: npiggin@suse.de S: Maintained +F: Documentation/blockdev/ramdisk.txt +F: drivers/block/brd.c RANDOM NUMBER DRIVER P: Matt Mackall M: mpm@selenic.com S: Maintained +F: drivers/char/random.c RAPIDIO SUBSYSTEM P: Matt Porter M: mporter@kernel.crashing.org L: linux-kernel@vger.kernel.org S: Maintained +F: drivers/rapidio/ RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER P: Corey Thomas M: coreythomas@charter.net L: linux-wireless@vger.kernel.org S: Maintained +F: drivers/net/wireless/ray* RCUTORTURE MODULE P: Josh Triplett M: josh@freedesktop.org L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/RCU/torture.txt +F: kernel/rcutorture.c RDC R-321X SoC P: Florian Fainelli @@ -3725,12 +4585,14 @@ P: Florian Fainelli M: florian.fainelli@telecomint.eu L: netdev@vger.kernel.org S: Maintained +F: drivers/net/r6040.c RDS - RELIABLE DATAGRAM SOCKETS P: Andy Grover M: andy.grover@oracle.com L: rds-devel@oss.oracle.com S: Supported +F: net/rds/ READ-COPY UPDATE (RCU) P: Dipankar Sarma @@ -3738,22 +4600,34 @@ M: dipankar@in.ibm.com W: http://www.rdrop.com/users/paulmck/rclock/ L: linux-kernel@vger.kernel.org S: Supported +F: Documentation/RCU/rcu.txt +F: Documentation/RCU/rcuref.txt +F: include/linux/rcupdate.h +F: include/linux/srcu.h +F: kernel/rcupdate.c REAL TIME CLOCK DRIVER P: Paul Gortmaker M: p_gortmaker@yahoo.com L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/rtc.txt +F: drivers/rtc/ +F: include/linux/rtc.h REAL TIME CLOCK (RTC) SUBSYSTEM P: Alessandro Zummo M: a.zummo@towertech.it L: rtc-linux@googlegroups.com S: Maintained +F: Documentation/rtc.txt +F: drivers/rtc/ +F: include/linux/rtc.h REISERFS FILE SYSTEM L: reiserfs-devel@vger.kernel.org S: Supported +F: fs/reiserfs/ RFKILL P: Ivo van Doorn @@ -3764,11 +4638,15 @@ F: net/rfkill RISCOM8 DRIVER S: Orphan +F: Documentation/serial/riscom8.txt +F: drivers/char/riscom8* ROCKETPORT DRIVER P: Comtrol Corp. W: http://www.comtrol.com S: Maintained +F: Documentation/serial/rocket.txt +F: drivers/char/rocket* ROSE NETWORK LAYER P: Ralf Baechle @@ -3776,6 +4654,9 @@ M: ralf@linux-mips.org L: linux-hams@vger.kernel.org W: http://www.linux-ax25.org/ S: Maintained +F: include/linux/rose.h +F: include/net/rose.h +F: net/rose/ RTL8180 WIRELESS DRIVER P: John W. Linville @@ -3784,6 +4665,7 @@ L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git S: Maintained +F: drivers/net/wireless/rtl818* RTL8187 WIRELESS DRIVER P: Herton Ronaldo Krzesinski @@ -3796,12 +4678,14 @@ L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git S: Maintained +F: drivers/net/wireless/rtl818x/rtl8187* S3 SAVAGE FRAMEBUFFER DRIVER P: Antonino Daplas M: adaplas@gmail.com L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: drivers/video/savage/ S390 P: Martin Schwidefsky @@ -3812,6 +4696,7 @@ M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported +F: arch/s390/ S390 NETWORK DRIVERS P: Ursula Braun @@ -3822,6 +4707,7 @@ M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported +F: drivers/s390/net/ S390 ZCRYPT DRIVER P: Felix Beck @@ -3841,6 +4727,8 @@ M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported +F: Documentation/s390/zfcpdump.txt +F: drivers/s390/scsi/zfcp_* S390 IUCV NETWORK LAYER P: Ursula Braun @@ -3849,6 +4737,9 @@ M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported +F: drivers/s390/net/*iucv* +F: include/net/iucv/ +F: net/iucv/ S3C24XX SD/MMC Driver P: Ben Dooks @@ -3856,6 +4747,7 @@ M: ben-linux@fluff.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) L: linux-kernel@vger.kernel.org S: Supported +F: drivers/mmc/host/s3cmci.* SAA7146 VIDEO4LINUX-2 DRIVER P: Michael Hunold @@ -3864,11 +4756,15 @@ L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.mihu.de/linux/saa7146 S: Maintained +F: drivers/media/common/saa7146* +F: drivers/media/video/*7146* +F: include/media/*7146* SC1200 WDT DRIVER P: Zwane Mwaikambo M: zwane@arm.linux.org.uk S: Maintained +F: drivers/watchdog/sc1200wdt.c SCHEDULER P: Ingo Molnar @@ -3877,6 +4773,8 @@ P: Peter Zijlstra M: peterz@infradead.org L: linux-kernel@vger.kernel.org S: Maintained +F: kernel/sched* +F: include/linux/sched.h SCSI CDROM DRIVER P: Jens Axboe @@ -3884,6 +4782,7 @@ M: axboe@kernel.dk L: linux-scsi@vger.kernel.org W: http://www.kernel.dk S: Maintained +F: drivers/scsi/sr* SCSI SG DRIVER P: Doug Gilbert @@ -3891,6 +4790,8 @@ M: dgilbert@interlog.com L: linux-scsi@vger.kernel.org W: http://www.torque.net/sg S: Maintained +F: drivers/scsi/sg.c +F: include/scsi/sg.h SCSI SUBSYSTEM P: James E.J. Bottomley @@ -3900,12 +4801,16 @@ T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-pending-2.6.git S: Maintained +F: drivers/scsi/ +F: include/scsi/ SCSI TAPE DRIVER P: Kai Mäkisara M: Kai.Makisara@kolumbus.fi L: linux-scsi@vger.kernel.org S: Maintained +F: Documentation/scsi/st.txt +F: drivers/scsi/st* SCTP PROTOCOL P: Vlad Yasevich @@ -3915,27 +4820,41 @@ M: sri@us.ibm.com L: linux-sctp@vger.kernel.org W: http://lksctp.sourceforge.net S: Supported +F: Documentation/networking/sctp.txt +F: include/linux/sctp.h +F: include/net/sctp/ +F: net/sctp/ SCx200 CPU SUPPORT P: Jim Cromie M: jim.cromie@gmail.com S: Odd Fixes +F: Documentation/i2c/busses/scx200_acb +F: arch/x86/kernel/scx200_32.c +F: drivers/watchdog/scx200_wdt.c +F: drivers/i2c/busses/scx200* +F: drivers/mtd/maps/scx200_docflash.c +F: include/linux/scx200.h SCx200 GPIO DRIVER P: Jim Cromie M: jim.cromie@gmail.com S: Maintained +F: drivers/char/scx200_gpio.c +F: include/linux/scx200_gpio.h SCx200 HRT CLOCKSOURCE DRIVER P: Jim Cromie M: jim.cromie@gmail.com S: Maintained +F: drivers/clocksource/scx200_hrt.c SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER P: Sascha Sommer M: saschasommer@freenet.de L: sdricohcs-devel@lists.sourceforge.net (subscribers-only) S: Maintained +F: drivers/mmc/host/sdricoh_cs.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER P: Pierre Ossman @@ -3949,6 +4868,7 @@ M: avorontsov@ru.mvista.com L: linuxppc-dev@ozlabs.org L: sdhci-devel@lists.ossman.eu S: Maintained +F: drivers/mmc/host/sdhci.* SECURITY SUBSYSTEM F: security/ @@ -3977,11 +4897,15 @@ L: selinux@tycho.nsa.gov (subscribers-only, general discussion) W: http://selinuxproject.org T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git S: Supported +F: include/linux/selinux* +F: security/selinux/ SENSABLE PHANTOM P: Jiri Slaby M: jirislaby@gmail.com S: Maintained +F: drivers/misc/phantom.c +F: include/linux/phantom.h SERIAL ATA (SATA) SUBSYSTEM P: Jeff Garzik @@ -3998,6 +4922,7 @@ M: subbus@serverengines.com L: netdev@vger.kernel.org W: http://www.serverengines.com S: Supported +F: drivers/net/benet/ SFC NETWORK DRIVER P: Steve Hodgson @@ -4005,17 +4930,22 @@ P: Ben Hutchings P: Robert Stonehouse M: linux-net-drivers@solarflare.com S: Supported +F: drivers/net/sfc/ SGI GRU DRIVER P: Jack Steiner M: steiner@sgi.com S: Maintained +F: drivers/misc/sgi-gru/ SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER P: Pat Gefre M: pfg@sgi.com L: linux-ia64@vger.kernel.org S: Supported +F: Documentation/ia64/serial.txt +F: drivers/serial/ioc?_serial.c +F: include/linux/ioc?.h SGI VISUAL WORKSTATION 320 AND 540 P: Andrey Panin @@ -4023,11 +4953,13 @@ M: pazke@donpac.ru L: linux-visws-devel@lists.sf.net W: http://linux-visws.sf.net S: Maintained for 2.6. +F: Documentation/sgi-visws.txt SGI XP/XPC/XPNET DRIVER P: Dean Nelson M: dcn@sgi.com S: Maintained +F: drivers/misc/sgi-xp/ SHARP LH SUPPORT (LH7952X & LH7A40X) P: Marc Singer @@ -4035,12 +4967,18 @@ M: elf@buici.com W: http://projects.buici.com/arm L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +F: Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen +F: arch/arm/mach-lh7a40x/ +F: drivers/serial/serial_lh7a40x.c +F: drivers/usb/gadget/lh7a40* +F: drivers/usb/host/ohci-lh7a40* SHPC HOTPLUG DRIVER P: Kristen Carlson Accardi M: kristen.c.accardi@intel.com L: linux-pci@vger.kernel.org S: Supported +F: drivers/pci/hotplug/shpchp* SIMTEC EB110ATX (Chalice CATS) P: Ben Dooks @@ -4048,6 +4986,7 @@ P: Vincent Sanders M: support@simtec.co.uk W: http://www.simtec.co.uk/products/EB110ATX/ S: Supported +F: arch/arm/mach-ebsa110/ SIMTEC EB2410ITX (BAST) P: Ben Dooks @@ -4055,12 +4994,16 @@ P: Vincent Sanders M: support@simtec.co.uk W: http://www.simtec.co.uk/products/EB2410ITX/ S: Supported +F: arch/arm/mach-s3c2410/ +F: drivers/*/*s3c2410* +F: drivers/*/*/*s3c2410* SIS 190 ETHERNET DRIVER P: Francois Romieu M: romieu@fr.zoreil.com L: netdev@vger.kernel.org S: Maintained +F: drivers/net/sis190.c SIS 900/7016 FAST ETHERNET DRIVER P: Daniele Venzano @@ -4068,30 +5011,39 @@ M: venza@brownhat.org W: http://www.brownhat.org/sis900.html L: netdev@vger.kernel.org S: Maintained +F: drivers/net/sis900.* SIS 96X I2C/SMBUS DRIVER P: Mark M. Hoffman M: mhoffman@lightlink.com L: linux-i2c@vger.kernel.org S: Maintained +F: Documentation/i2c/busses/i2c-sis96x +F: drivers/i2c/busses/i2c-sis96x.c SIS FRAMEBUFFER DRIVER P: Thomas Winischhofer M: thomas@winischhofer.net W: http://www.winischhofer.net/linuxsisvga.shtml S: Maintained +F: Documentation/fb/sisfb.txt +F: drivers/video/sis/ +F: include/video/sisfb.h SIS USB2VGA DRIVER P: Thomas Winischhofer M: thomas@winischhofer.net W: http://www.winischhofer.at/linuxsisusbvga.shtml S: Maintained +F: drivers/usb/misc/sisusbvga/ SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS P: Stephen Hemminger M: shemminger@linux-foundation.org L: netdev@vger.kernel.org S: Maintained +F: drivers/net/skge.* +F: drivers/net/sky2.* SLAB ALLOCATOR P: Christoph Lameter @@ -4102,34 +5054,43 @@ P: Matt Mackall M: mpm@selenic.com L: linux-mm@kvack.org S: Maintained +F: include/linux/sl?b*.h +F: mm/sl?b.c SMC91x ETHERNET DRIVER P: Nicolas Pitre M: nico@cam.org S: Maintained +F: drivers/net/smc91x.* SMSC47B397 HARDWARE MONITOR DRIVER P: Mark M. Hoffman M: mhoffman@lightlink.com L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/smsc47b397 +F: drivers/hwmon/smsc47b397.c SMSC911x ETHERNET DRIVER P: Steve Glendinning M: steve.glendinning@smsc.com L: netdev@vger.kernel.org S: Supported +F: include/linux/smsc911x.h +F: drivers/net/smsc911x.* SMSC9420 PCI ETHERNET DRIVER P: Steve Glendinning M: steve.glendinning@smsc.com L: netdev@vger.kernel.org S: Supported +F: drivers/net/smsc9420.* SMX UIO Interface P: Ben Nizette M: bn@niasdigital.com S: Maintained +F: drivers/uio/uio_smx.c SN-IA64 (Itanium) SUB-PLATFORM P: Jes Sorensen @@ -4138,6 +5099,7 @@ L: linux-altix@sgi.com L: linux-ia64@vger.kernel.org W: http://www.sgi.com/altix S: Maintained +F: arch/ia64/sn/ SOC-CAMERA V4L2 SUBSYSTEM P: Guennadi Liakhovetski @@ -4145,29 +5107,37 @@ M: g.liakhovetski@gmx.de L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: include/media/v4l2* +F: drivers/media/video/v4l2* SOEKRIS NET48XX LED SUPPORT P: Chris Boot M: bootc@bootc.net S: Maintained +F: drivers/leds/leds-net48xx.c SOFTWARE RAID (Multiple Disks) SUPPORT P: Neil Brown M: neilb@suse.de L: linux-raid@vger.kernel.org S: Supported +F: drivers/md/ +F: include/linux/raid/ SONIC NETWORK DRIVER P: Thomas Bogendoerfer M: tsbogend@alpha.franken.de L: netdev@vger.kernel.org S: Maintained +F: drivers/net/sonic.* SONICS SILICON BACKPLANE DRIVER (SSB) P: Michael Buesch M: mb@bu3sch.de L: netdev@vger.kernel.org S: Maintained +F: drivers/ssb/ +F: include/linux/ssb/ SONY VAIO CONTROL DEVICE DRIVER P: Mattia Dongili @@ -4175,6 +5145,10 @@ M: malattia@linux.it L: linux-acpi@vger.kernel.org W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers S: Maintained +F: Documentation/laptops/sony-laptop.txt +F: drivers/char/sonypi.c +F: drivers/platform/x86/sony-laptop.c +F: include/linux/sony-laptop.h SONY MEMORYSTICK CARD SUPPORT P: Alex Dubov @@ -4182,6 +5156,7 @@ M: oakad@yahoo.com L: linux-kernel@vger.kernel.org W: http://tifmxx.berlios.de/ S: Maintained +F: drivers/memstick/host/tifm_ms.c SOUND P: Jaroslav Kysela @@ -4190,6 +5165,7 @@ P: Takashi Iwai M: tiwai@suse.de L: alsa-devel@alsa-project.org (subscribers-only) S: Maintained +F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) P: Liam Girdwood @@ -4200,6 +5176,7 @@ T: git opensource.wolfsonmicro.com/linux-2.6-asoc L: alsa-devel@alsa-project.org (subscribers-only) W: http://alsa-project.org/main/index.php/ASoC S: Supported +F: sound/soc/ SPARC + UltraSPARC (sparc/sparc64) P: David S. Miller @@ -4208,18 +5185,24 @@ L: sparclinux@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git S: Maintained +F: arch/sparc/ SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER P: Roger Wolff M: R.E.Wolff@BitWizard.nl L: linux-kernel@vger.kernel.org ? S: Supported +F: Documentation/serial/specialix.txt +F: drivers/char/specialix* SPI SUBSYSTEM P: David Brownell M: dbrownell@users.sourceforge.net L: spi-devel-general@lists.sourceforge.net S: Maintained +F: Documentation/spi/ +F: drivers/spi/ +F: include/linux/spi/ SPIDERNET NETWORK DRIVER for CELL P: Ishizaki Kou @@ -4228,6 +5211,8 @@ P: Jens Osterkamp M: jens@de.ibm.com L: netdev@vger.kernel.org S: Supported +F: Documentation/networking/spider_net.txt +F: drivers/net/spider_net* SPU FILE SYSTEM P: Jeremy Kerr @@ -4236,6 +5221,8 @@ L: linuxppc-dev@ozlabs.org L: cbe-oss-dev@ozlabs.org W: http://www.ibm.com/developerworks/power/cell/ S: Supported +F: Documentation/filesystems/spufs.txt +F: arch/powerpc/platforms/cell/spufs/ SQUASHFS FILE SYSTEM P: Phillip Lougher @@ -4243,12 +5230,15 @@ M: phillip@lougher.demon.co.uk L: squashfs-devel@lists.sourceforge.net (subscribers-only) W: http://squashfs.org.uk S: Maintained +F: Documentation/filesystems/squashfs.txt +F: fs/squashfs/ SRM (Alpha) environment access P: Jan-Benedict Glaw M: jbglaw@lug-owl.de L: linux-kernel@vger.kernel.org S: Maintained +F: arch/alpha/kernel/srm_env.c STABLE BRANCH P: Greg Kroah-Hartman @@ -4264,27 +5254,35 @@ M: gregkh@suse.de L: linux-kernel@vger.kernel.org T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Maintained +F: drivers/staging/ STARFIRE/DURALAN NETWORK DRIVER P: Ion Badulescu M: ionut@cs.columbia.edu S: Maintained +F: drivers/net/starfire* STARMODE RADIO IP (STRIP) PROTOCOL DRIVER W: http://mosquitonet.Stanford.EDU/strip.html S: Orphan +F: drivers/net/wireless/strip.c +F: include/linux/if_strip.h STRADIS MPEG-2 DECODER DRIVER P: Nathan Laredo M: laredo@gnu.org W: http://www.stradis.com/ S: Maintained +F: drivers/media/video/stradis.c SUN3/3X P: Sam Creasey M: sammy@sammy.net W: http://sammy.net/sun3/ S: Maintained +F: arch/m68k/kernel/*sun3* +F: arch/m68k/sun3*/ +F: arch/m68k/include/asm/sun3* SUPERH P: Paul Mundt @@ -4293,6 +5291,7 @@ L: linux-sh@vger.kernel.org W: http://www.linux-sh.org T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git S: Supported +F: arch/sh/ SUSPEND TO RAM P: Len Brown @@ -4303,29 +5302,48 @@ P: Rafael J. Wysocki M: rjw@sisk.pl L: linux-pm@lists.linux-foundation.org S: Supported +F: Documentation/power/ +F: arch/x86/kernel/acpi/ +F: drivers/base/power/ +F: kernel/power/ +F: include/linux/suspend.h +F: include/linux/freezer.h +F: include/linux/pm.h +F: include/asm-*/suspend.h SVGA HANDLING P: Martin Mares M: mj@ucw.cz L: linux-video@atrey.karlin.mff.cuni.cz S: Maintained +F: Documentation/svga.txt +F: arch/x86/boot/video* SYSV FILESYSTEM P: Christoph Hellwig M: hch@infradead.org S: Maintained +F: Documentation/filesystems/sysv-fs.txt +F: fs/sysv/ +F: include/linux/sysv_fs.h TASKSTATS STATISTICS INTERFACE P: Balbir Singh M: balbir@linux.vnet.ibm.com L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/accounting/taskstats* +F: include/linux/taskstats* +F: kernel/taskstats.c TC CLASSIFIER P: Jamal Hadi Salim M: hadi@cyberus.ca L: netdev@vger.kernel.org S: Maintained +F: include/linux/pkt_cls.h +F: include/net/pkt_cls.h +F: net/sched/ TCP LOW PRIORITY MODULE P: Wong Hoi Sing, Edison @@ -4334,6 +5352,7 @@ P: Hung Hing Lun, Mike M: hlhung3i@gmail.com W: http://tcp-lp-mod.sourceforge.net/ S: Maintained +F: net/ipv4/tcp_lp.c TEHUTI ETHERNET DRIVER P: Alexander Indenbaum @@ -4342,16 +5361,19 @@ P: Andy Gospodarek M: andy@greyhouse.net L: netdev@vger.kernel.org S: Supported +F: drivers/net/tehuti* Telecom Clock Driver for MCPL0010 P: Mark Gross M: mark.gross@intel.com S: Supported +F: drivers/char/tlclk.c TENSILICA XTENSA PORT (xtensa) P: Chris Zankel M: chris@zankel.net S: Maintained +F: arch/xtensa/ THINKPAD ACPI EXTRAS DRIVER P: Henrique de Moraes Holschuh @@ -4361,11 +5383,15 @@ W: http://ibm-acpi.sourceforge.net W: http://thinkwiki.org/wiki/Ibm-acpi T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git S: Maintained +F: drivers/platform/x86/thinkpad_acpi.c TI FLASH MEDIA INTERFACE DRIVER P: Alex Dubov M: oakad@yahoo.com S: Maintained +F: drivers/misc/tifm* +F: drivers/mmc/host/tifm_sd.c +F: include/linux/tifm.h TI OMAP MMC INTERFACE DRIVER P: Carlos Aguiar, Anderson Briglia and Syed Khasim @@ -4373,11 +5399,13 @@ M: linux-omap@vger.kernel.org W: http://linux.omap.com W: http://www.muru.com/linux/omap/ S: Maintained +F: drivers/mmc/host/omap.c TI OMAP RANDOM NUMBER GENERATOR SUPPORT P: Deepak Saxena M: dsaxena@plexity.net S: Maintained +F: drivers/char/hw_random/omap-rng.c TIPC NETWORK LAYER P: Per Liden @@ -4391,6 +5419,9 @@ W: http://tipc.sourceforge.net/ W: http://tipc.cslab.ericsson.net/ T: git tipc.cslab.ericsson.net:/pub/git/tipc.git S: Maintained +F: include/linux/tipc*.h +F: include/net/tipc/ +F: net/tipc/ TLAN NETWORK DRIVER P: Samuel Chessman @@ -4398,6 +5429,8 @@ M: chessman@tux.org L: tlan-devel@lists.sourceforge.net (subscribers-only) W: http://sourceforge.net/projects/tlan/ S: Maintained +F: Documentation/networking/tlan.txt +F: drivers/net/tlan.* TOMOYO SECURITY MODULE P: Kentaro Takeda @@ -4411,9 +5444,11 @@ L: tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese) W: http://tomoyo.sourceforge.jp/ T: quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.2.x/tomoyo-lsm/patches/ S: Maintained +F: security/tomoyo/ TOSHIBA ACPI EXTRAS DRIVER S: Orphan +F: drivers/platform/x86/toshiba_acpi.c TOSHIBA SMM DRIVER P: Jonathan Buzzard @@ -4421,6 +5456,8 @@ M: jonathan@buzzard.org.uk L: tlinux-users@tce.toshiba-dme.co.jp W: http://www.buzzard.org.uk/toshiba/ S: Maintained +F: drivers/char/toshiba.c +F: include/linux/toshiba.h TMIO MMC DRIVER P: Ian Molton @@ -4438,6 +5475,7 @@ M: m.selhorst@sirrix.com W: http://www.sirrix.com L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: drivers/char/tpm/ TRIVIAL PATCHES P: Jiri Kosina @@ -4459,6 +5497,7 @@ P: Kyle McMartin M: kyle@mcmartin.ca L: netdev@vger.kernel.org S: Maintained +F: drivers/net/tulip/ TUN/TAP driver P: Maxim Krasnyansky @@ -4466,17 +5505,22 @@ M: maxk@qualcomm.com L: vtun@office.satix.net W: http://vtun.sourceforge.net/tun S: Maintained +F: Documentation/networking/tuntap.txt +F: arch/um/os-Linux/drivers/ TURBOCHANNEL SUBSYSTEM P: Maciej W. Rozycki M: macro@linux-mips.org S: Maintained +F: drivers/tc/ +F: include/linux/tc.h U14-34F SCSI DRIVER P: Dario Ballabio M: ballabio_dario@emc.com L: linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/u14-34f.c UBI FILE SYSTEM (UBIFS) P: Artem Bityutskiy @@ -4487,6 +5531,8 @@ L: linux-mtd@lists.infradead.org T: git git://git.infradead.org/ubifs-2.6.git W: http://www.linux-mtd.infradead.org/doc/ubifs.html S: Maintained +F: Documentation/filesystems/ubifs.txt +F: fs/ubifs/ UCLINUX (AND M68KNOMMU) P: Greg Ungerer @@ -4494,6 +5540,7 @@ M: gerg@uclinux.org W: http://www.uclinux.org/ L: uclinux-dev@uclinux.org (subscribers-only) S: Maintained +F: arch/m68knommu/ UCLINUX FOR RENESAS H8/300 P: Yoshinori Sato @@ -4506,18 +5553,25 @@ P: Jan Kara M: jack@suse.cz W: http://linux-udf.sourceforge.net S: Maintained +F: Documentation/filesystems/udf.txt +F: fs/udf/ UFS FILESYSTEM P: Evgeniy Dushistov M: dushistov@mail.ru L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/filesystems/ufs.txt +F: fs/ufs/ ULTRA-WIDEBAND (UWB) SUBSYSTEM: P: David Vrabel M: david.vrabel@csr.com L: linux-usb@vger.kernel.org S: Supported +F: drivers/uwb/* +F: include/linux/uwb.h +F: include/linux/uwb/ UNIFORM CDROM DRIVER P: Jens Axboe @@ -4525,6 +5579,9 @@ M: axboe@kernel.dk L: linux-kernel@vger.kernel.org W: http://www.kernel.dk S: Maintained +F: Documentation/cdrom/ +F: drivers/cdrom/cdrom.c +F: include/linux/cdrom.h UNSORTED BLOCK IMAGES (UBI) P: Artem Bityutskiy @@ -4533,12 +5590,17 @@ W: http://www.linux-mtd.infradead.org/ L: linux-mtd@lists.infradead.org T: git git://git.infradead.org/ubi-2.6.git S: Maintained +F: drivers/mtd/ubi +F: include/linux/mtd/ubi.h +F: include/mtd/ubi-user.h USB ACM DRIVER P: Oliver Neukum M: oliver@neukum.name L: linux-usb@vger.kernel.org S: Maintained +F: Documentation/usb/acm.txt +F: drivers/usb/class/cdc-acm.* USB BLOCK DRIVER (UB ub) P: Pete Zaitcev @@ -4546,6 +5608,7 @@ M: zaitcev@redhat.com L: linux-kernel@vger.kernel.org L: linux-usb@vger.kernel.org S: Supported +F: drivers/block/ub.c USB CDC ETHERNET DRIVER P: Greg Kroah-Hartman @@ -4553,12 +5616,15 @@ M: greg@kroah.com L: linux-usb@vger.kernel.org S: Maintained W: http://www.kroah.com/linux-usb/ +F: drivers/net/usb/cdc_*.c +F: include/linux/usb/cdc.h USB CYPRESS C67X00 DRIVER P: Peter Korsgaard M: jacmet@sunsite.dk L: linux-usb@vger.kernel.org S: Maintained +F: drivers/usb/c67x00/ USB DAVICOM DM9601 DRIVER P: Peter Korsgaard @@ -4566,6 +5632,7 @@ M: jacmet@sunsite.dk L: netdev@vger.kernel.org W: http://www.linux-usb.org/usbnet S: Maintained +F: drivers/net/usb/dm9601.c USB DIAMOND RIO500 DRIVER P: Cesar Miquel @@ -4573,12 +5640,15 @@ M: miquel@df.uba.ar L: rio500-users@lists.sourceforge.net W: http://rio500.sourceforge.net S: Maintained +F: drivers/usb/misc/rio500* USB EHCI DRIVER P: David Brownell M: dbrownell@users.sourceforge.net L: linux-usb@vger.kernel.org S: Odd Fixes +F: Documentation/usb/ehci.txt +F: drivers/usb/host/ehci* USB ET61X[12]51 DRIVER P: Luca Risolia @@ -4588,6 +5658,7 @@ L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.linux-projects.org S: Maintained +F: drivers/media/video/et61x251/ USB GADGET/PERIPHERAL SUBSYSTEM P: David Brownell @@ -4595,6 +5666,8 @@ M: dbrownell@users.sourceforge.net L: linux-usb@vger.kernel.org W: http://www.linux-usb.org/gadget S: Maintained +F: drivers/usb/gadget/ +F: include/linux/usb/gadget* USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...) P: Jiri Kosina @@ -4602,18 +5675,23 @@ M: jkosina@suse.cz L: linux-usb@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained +F: Documentation/usb/hiddev.txt +F: drivers/hid/usbhid/ USB ISP116X DRIVER P: Olav Kongas M: ok@artecdesign.ee L: linux-usb@vger.kernel.org S: Maintained +F: drivers/usb/host/isp116x* +F: include/linux/usb/isp116x.h USB KAWASAKI LSI DRIVER P: Oliver Neukum M: oliver@neukum.name L: linux-usb@vger.kernel.org S: Maintained +F: drivers/usb/serial/kl5kusb105.* USB MASS STORAGE DRIVER P: Matthew Dharm @@ -4622,18 +5700,22 @@ L: linux-usb@vger.kernel.org L: usb-storage@lists.one-eyed-alien.net S: Maintained W: http://www.one-eyed-alien.net/~mdharm/linux-usb/ +F: drivers/usb/storage/ USB OHCI DRIVER P: David Brownell M: dbrownell@users.sourceforge.net L: linux-usb@vger.kernel.org S: Odd Fixes +F: Documentation/usb/ohci.txt +F: drivers/usb/host/ohci* USB OPTION-CARD DRIVER P: Matthias Urlichs M: smurf@smurf.noris.de L: linux-usb@vger.kernel.org S: Maintained +F: drivers/usb/serial/option.c USB OV511 DRIVER P: Mark McClelland @@ -4641,6 +5723,7 @@ M: mmcclell@bigfoot.com L: linux-usb@vger.kernel.org W: http://alpha.dyndns.org/ov511/ S: Maintained +F: drivers/media/video/ov511.* USB PEGASUS DRIVER P: Petko Manolov @@ -4649,12 +5732,14 @@ L: linux-usb@vger.kernel.org L: netdev@vger.kernel.org W: http://pegasus2.sourceforge.net/ S: Maintained +F: drivers/net/usb/pegasus.* USB PRINTER DRIVER (usblp) P: Pete Zaitcev M: zaitcev@redhat.com L: linux-usb@vger.kernel.org S: Supported +F: drivers/usb/class/usblp.c USB RTL8150 DRIVER P: Petko Manolov @@ -4663,6 +5748,7 @@ L: linux-usb@vger.kernel.org L: netdev@vger.kernel.org W: http://pegasus2.sourceforge.net/ S: Maintained +F: drivers/net/usb/rtl8150.c USB SE401 DRIVER P: Jeroen Vreeken @@ -4670,12 +5756,15 @@ M: pe1rxq@amsat.org L: linux-usb@vger.kernel.org W: http://www.chello.nl/~j.vreeken/se401/ S: Maintained +F: Documentation/video4linux/se401.txt +F: drivers/media/video/se401.* USB SERIAL BELKIN F5U103 DRIVER P: William Greathouse M: wgreathouse@smva.com L: linux-usb@vger.kernel.org S: Maintained +F: drivers/usb/serial/belkin_sa.* USB SERIAL CYPRESS M8 DRIVER P: Lonnie Mendez @@ -4684,12 +5773,14 @@ L: linux-usb@vger.kernel.org S: Maintained W: http://geocities.com/i0xox0i W: http://firstlight.net/cvs +F: drivers/usb/serial/cypress_m8.* USB SERIAL CYBERJACK DRIVER P: Matthias Bruestle and Harald Welte M: support@reiner-sct.com W: http://www.reiner-sct.de/support/treiber_cyberjack.php S: Maintained +F: drivers/usb/serial/cyberjack.c USB SERIAL DIGI ACCELEPORT DRIVER P: Peter Berger and Al Borchers @@ -4697,18 +5788,24 @@ M: pberger@brimson.com M: alborchers@steinerpoint.com L: linux-usb@vger.kernel.org S: Maintained +F: drivers/usb/serial/digi_acceleport.c USB SERIAL DRIVER P: Greg Kroah-Hartman M: gregkh@suse.de L: linux-usb@vger.kernel.org S: Supported +F: Documentation/usb/usb-serial.txt +F: drivers/usb/serial/generic.c +F: drivers/usb/serial/usb-serial.c +F: include/linux/usb/serial.h USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER P: Gary Brubaker M: xavyer@ix.netcom.com L: linux-usb@vger.kernel.org S: Maintained +F: drivers/usb/serial/empeg.c USB SERIAL KEYSPAN DRIVER P: Greg Kroah-Hartman @@ -4716,6 +5813,7 @@ M: greg@kroah.com L: linux-usb@vger.kernel.org W: http://www.kroah.com/linux/ S: Maintained +F: drivers/usb/serial/*keyspan* USB SERIAL WHITEHEAT DRIVER P: Support Department @@ -4723,12 +5821,14 @@ M: support@connecttech.com L: linux-usb@vger.kernel.org W: http://www.connecttech.com S: Supported +F: drivers/usb/serial/whiteheat* USB SMSC95XX ETHERNET DRIVER P: Steve Glendinning M: steve.glendinning@smsc.com L: netdev@vger.kernel.org S: Supported +F: drivers/net/usb/smsc95xx.* USB SN9C1xx DRIVER P: Luca Risolia @@ -4738,6 +5838,8 @@ L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.linux-projects.org S: Maintained +F: Documentation/video4linux/sn9c102.txt +F: drivers/media/video/sn9c102/ USB SUBSYSTEM P: Greg Kroah-Hartman @@ -4746,12 +5848,18 @@ L: linux-usb@vger.kernel.org W: http://www.linux-usb.org T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported +F: Documentation/usb/ +F: drivers/net/usb/ +F: drivers/usb/ +F: include/linux/usb.h +F: include/linux/usb/ USB UHCI DRIVER P: Alan Stern M: stern@rowland.harvard.edu L: linux-usb@vger.kernel.org S: Maintained +F: drivers/usb/host/uhci* USB "USBNET" DRIVER FRAMEWORK P: David Brownell @@ -4759,6 +5867,8 @@ M: dbrownell@users.sourceforge.net L: netdev@vger.kernel.org W: http://www.linux-usb.org/usbnet S: Maintained +F: drivers/net/usb/usbnet.c +F: include/linux/usb/usbnet.h USB VIDEO CLASS P: Laurent Pinchart @@ -4768,6 +5878,7 @@ L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://linux-uvc.berlios.de S: Maintained +F: drivers/media/video/uvc/ USB W996[87]CF DRIVER P: Luca Risolia @@ -4777,12 +5888,15 @@ L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.linux-projects.org S: Maintained +F: Documentation/video4linux/w9968cf.txt +F: drivers/media/video/w996* USB WIRELESS RNDIS DRIVER (rndis_wlan) P: Jussi Kivilinna M: jussi.kivilinna@mbnet.fi L: linux-wireless@vger.kernel.org S: Maintained +F: drivers/net/wireless/rndis_wlan.c USB ZC0301 DRIVER P: Luca Risolia @@ -4792,6 +5906,8 @@ L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.linux-projects.org S: Maintained +F: Documentation/video4linux/zc0301.txt +F: drivers/media/video/zc0301/ USB ZD1201 DRIVER P: Jeroen Vreeken @@ -4799,6 +5915,7 @@ M: pe1rxq@amsat.org L: linux-usb@vger.kernel.org W: http://linux-lc100020.sourceforge.net S: Maintained +F: drivers/net/wireless/zd1201.* USB ZR364XX DRIVER P: Antoine Jacquet @@ -4808,6 +5925,8 @@ L: linux-media@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://royale.zerezo.com/zr364xx/ S: Maintained +F: Documentation/video4linux/zr364xx.txt +F: drivers/media/video/zr364xx.c USER-MODE LINUX (UML) P: Jeff Dike @@ -4816,6 +5935,10 @@ L: user-mode-linux-devel@lists.sourceforge.net L: user-mode-linux-user@lists.sourceforge.net W: http://user-mode-linux.sourceforge.net S: Maintained +F: Documentation/uml/ +F: arch/um/ +F: fs/hostfs/ +F: fs/hppfs/ USERSPACE I/O (UIO) P: Hans J. Koch @@ -4824,6 +5947,9 @@ P: Greg Kroah-Hartman M: gregkh@suse.de L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/DocBook/uio-howto.tmpl +F: drivers/uio/ +F: include/linux/uio*.h UTIL-LINUX-NG PACKAGE P: Karel Zak @@ -4839,23 +5965,30 @@ M: spock@gentoo.org L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://dev.gentoo.org/~spock/projects/uvesafb/ S: Maintained +F: Documentation/fb/uvesafb.txt +F: drivers/video/uvesafb.* VFAT/FAT/MSDOS FILESYSTEM P: OGAWA Hirofumi M: hirofumi@mail.parknet.co.jp L: linux-kernel@vger.kernel.org S: Maintained +F: Documentation/filesystems/vfat.txt +F: fs/fat/ VIA RHINE NETWORK DRIVER P: Roger Luethi M: rl@hellgate.ch S: Maintained +F: drivers/net/via-rhine.c VIAPRO SMBUS DRIVER P: Jean Delvare M: khali@linux-fr.org L: linux-i2c@vger.kernel.org S: Maintained +F: Documentation/i2c/busses/i2c-viapro +F: drivers/i2c/busses/i2c-viapro.c VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER P: Joseph Chan @@ -4864,12 +5997,14 @@ P: Scott Fang M: ScottFang@viatech.com.cn L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +F: drivers/video/via/ VIA VELOCITY NETWORK DRIVER P: Francois Romieu M: romieu@fr.zoreil.com L: netdev@vger.kernel.org S: Maintained +F: drivers/net/via-velocity.* VIDEO FOR LINUX (V4L) P: Mauro Carvalho Chehab @@ -4878,12 +6013,21 @@ L: linux-media@vger.kernel.org W: http://linuxtv.org T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained +F: Documentation/video4linux/ +F: drivers/media/video/ +F: drivers/media/radio/ +F: include/linux/videodev.h +F: include/linux/videodev2.h +F: include/media/ VLAN (802.1Q) P: Patrick McHardy M: kaber@trash.net L: netdev@vger.kernel.org S: Maintained +F: drivers/net/macvlan.c +F: include/linux/if_*vlan.h +F: net/8021q/ VOLTAGE AND CURRENT REGULATOR FRAMEWORK P: Liam Girdwood @@ -4894,47 +6038,62 @@ W: http://opensource.wolfsonmicro.com/node/15 W: http://www.slimlogic.co.uk/?p=48 T: git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git S: Supported +F: drivers/regulator/ +F: include/linux/regulator/ VT1211 HARDWARE MONITOR DRIVER P: Juerg Haefliger M: juergh@gmail.com L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/vt1211 +F: drivers/hwmon/vt1211.c VT8231 HARDWARE MONITOR DRIVER P: Roger Lucas M: vt8231@hiddenengine.co.uk L: lm-sensors@lm-sensors.org S: Maintained +F: drivers/hwmon/vt8231.c W1 DALLAS'S 1-WIRE BUS P: Evgeniy Polyakov M: johnpol@2ka.mipt.ru S: Maintained +F: Documentation/w1/ +F: drivers/w1/ W83791D HARDWARE MONITORING DRIVER P: Marc Hulsman M: m.hulsman@tudelft.nl L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/w83791d +F: drivers/hwmon/w83791d.c W83793 HARDWARE MONITORING DRIVER P: Rudolf Marek M: r.marek@assembler.cz L: lm-sensors@lm-sensors.org S: Maintained +F: Documentation/hwmon/w83793 +F: drivers/hwmon/w83793.c W83L51xD SD/MMC CARD INTERFACE DRIVER P: Pierre Ossman M: pierre@ossman.eu L: linux-kernel@vger.kernel.org S: Maintained +F: drivers/mmc/host/wbsd.* WATCHDOG DEVICE DRIVERS P: Wim Van Sebroeck M: wim@iguana.be T: git kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git S: Maintained +F: Documentation/watchdog/ +F: drivers/watchdog/ +F: include/linux/watchdog.h WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS P: Jean Tourrilhes @@ -4942,12 +6101,15 @@ M: jt@hpl.hp.com L: linux-wireless@vger.kernel.org W: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ S: Maintained +F: Documentation/networking/wavelan.txt +F: drivers/net/wireless/wavelan* WD7000 SCSI DRIVER P: Miroslav Zagorac M: zaga@fly.cc.fer.hr L: linux-scsi@vger.kernel.org S: Maintained +F: drivers/scsi/wd7000.c WIMAX STACK P: Inaky Perez-Gonzalez @@ -4961,11 +6123,14 @@ WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM P: David Vrabel M: david.vrabel@csr.com S: Maintained +F: include/linux/wlp.h +F: drivers/uwb/wlp/ WISTRON LAPTOP BUTTON DRIVER P: Miloslav Trmac M: mitr@volny.cz S: Maintained +F: drivers/input/misc/wistron_btns.c WL3501 WIRELESS PCMCIA CARD DRIVER P: Arnaldo Carvalho de Melo @@ -4973,6 +6138,7 @@ M: acme@ghostprotocols.net L: linux-wireless@vger.kernel.org W: http://oops.ghostprotocols.net:81/blog S: Maintained +F: drivers/net/wireless/wl3501* WM97XX TOUCHSCREEN DRIVERS P: Mark Brown @@ -4983,12 +6149,17 @@ L: linux-input@vger.kernel.org T: git git://opensource.wolfsonmicro.com/linux-2.6-touch W: http://opensource.wolfsonmicro.com/node/7 S: Supported +F: drivers/input/touchscreen/*wm97* +F: include/linux/wm97xx.h X.25 NETWORK LAYER P: Henner Eisen M: eis@baty.hanse.de L: linux-x25@vger.kernel.org S: Maintained +F: Documentation/networking/x25* +F: include/net/x25* +F: net/x25/ X86 ARCHITECTURE (32-BIT AND 64-BIT) P: Thomas Gleixner @@ -5001,6 +6172,8 @@ M: x86@kernel.org L: linux-kernel@vger.kernel.org T: git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git S: Maintained +F: Documentation/x86/ +F: arch/x86/ XEN HYPERVISOR INTERFACE P: Jeremy Fitzhardinge @@ -5010,6 +6183,11 @@ M: chrisw@sous-sol.org L: virtualization@lists.osdl.org L: xen-devel@lists.xensource.com S: Supported +F: arch/x86/xen/ +F: drivers/*/xen-*front.c +F: drivers/xen/ +F: arch/x86/include/asm/xen/ +F: include/xen/ XFS FILESYSTEM P: Silicon Graphics Inc @@ -5020,6 +6198,8 @@ L: xfs@oss.sgi.com W: http://oss.sgi.com/projects/xfs T: git://oss.sgi.com/xfs/xfs.git S: Supported +F: Documentation/filesystems/xfs.txt +F: fs/xfs/ XILINX SYSTEMACE DRIVER P: Grant Likely @@ -5027,24 +6207,30 @@ M: grant.likely@secretlab.ca W: http://www.secretlab.ca/ L: linux-kernel@vger.kernel.org S: Maintained +F: drivers/block/xsysace.c XILINX UARTLITE SERIAL DRIVER P: Peter Korsgaard M: jacmet@sunsite.dk L: linux-serial@vger.kernel.org S: Maintained +F: drivers/serial/uartlite.c YAM DRIVER FOR AX.25 P: Jean-Paul Roubelat M: jpr@f6fbb.org L: linux-hams@vger.kernel.org S: Maintained +F: drivers/net/hamradio/yam* +F: include/linux/yam.h YEALINK PHONE DRIVER P: Henk Vergonet M: Henk.Vergonet@gmail.com L: usbb2k-api-dev@nongnu.org S: Maintained +F: Documentation/input/yealink.txt +F: drivers/input/misc/yealink.* Z8530 DRIVER FOR AX.25 P: Joerg Reuter @@ -5053,6 +6239,9 @@ W: http://yaina.de/jreuter/ W: http://www.qsl.net/dl1bke/ L: linux-hams@vger.kernel.org S: Maintained +F: Documentation/networking/z8530drv.txt +F: drivers/net/hamradio/*scc.c +F: drivers/net/hamradio/z8530.h ZD1211RW WIRELESS DRIVER P: Daniel Drake @@ -5063,6 +6252,7 @@ W: http://zd1211.ath.cx/wiki/DriverRewrite L: linux-wireless@vger.kernel.org L: zd1211-devs@lists.sourceforge.net (subscribers-only) S: Maintained +F: drivers/net/wireless/zd1211rw/ ZR36067 VIDEO FOR LINUX DRIVER L: mjpeg-users@lists.sourceforge.net @@ -5070,11 +6260,13 @@ L: linux-media@vger.kernel.org W: http://mjpeg.sourceforge.net/driver-zoran/ T: Mercurial http://linuxtv.org/hg/v4l-dvb S: Odd Fixes +F: drivers/media/video/zoran/ ZS DECSTATION Z85C30 SERIAL DRIVER P: Maciej W. Rozycki M: macro@linux-mips.org S: Maintained +F: drivers/serial/zs.* THE REST P: Linus Torvalds -- cgit v0.10.2 From 7d2c86b5a048e74ed375ae7ccc1106deabf8ca57 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 20:59:01 -0700 Subject: MAINTAINERS - Standardize style Use one email address per line Remove file patterns from section names Use tab after : Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 136aac6..641ffc1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -377,7 +377,7 @@ F: include/linux/agp* AHA152X SCSI DRIVER P: Juergen E. Fischer -M: Juergen Fischer +M: fischer@norbit.de L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/aha152x* @@ -460,10 +460,10 @@ F: arch/x86/kernel/amd_iommu*.c F: arch/x86/include/asm/amd_iommu*.h AMD MICROCODE UPDATE SUPPORT -P: Andreas Herrmann -M: andeas.herrmann3@amd.com -L: amd64-microcode@amd64.org -S: Supported +P: Andreas Herrmann +M: andeas.herrmann3@amd.com +L: amd64-microcode@amd64.org +S: Supported F: arch/x86/kernel/microcode_amd.c AMS (Apple Motion Sensor) DRIVER @@ -743,10 +743,10 @@ W: http://hackndev.com S: Maintained ARM/PALMZ72 SUPPORT -P: Sergey Lapin -M: slapin@ossfans.org -W: http://hackndev.com -S: Maintained +P: Sergey Lapin +M: slapin@ossfans.org +W: http://hackndev.com +S: Maintained ARM/PLEB SUPPORT P: Peter Chubb @@ -807,11 +807,11 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/NUVOTON W90X900 ARM ARCHITECTURE -P: Wan ZongShun -M: mcuos.com@gmail.com -L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -W: http://www.mcuos.com -S: Maintained +P: Wan ZongShun +M: mcuos.com@gmail.com +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.mcuos.com +S: Maintained ARPD SUPPORT P: Jonathan Layes @@ -1546,8 +1546,10 @@ S: Maintained F: sound/pci/cs5535audio/ CX18 VIDEO4LINUX DRIVER -P: Hans Verkuil, Andy Walls -M: hverkuil@xs4all.nl, awalls@radix.net +P: Hans Verkuil +M: hverkuil@xs4all.nl +P: Andy Walls +M: awalls@radix.net L: ivtv-devel@ivtvdriver.org L: ivtv-users@ivtvdriver.org L: linux-media@vger.kernel.org @@ -1795,7 +1797,7 @@ L: linux-acpi@vger.kernel.org S: Supported F: drivers/acpi/dock.c -DOCUMENTATION (/Documentation directory) +DOCUMENTATION P: Randy Dunlap M: rdunlap@xenotime.net L: linux-doc@vger.kernel.org @@ -1865,7 +1867,9 @@ F: drivers/serial/dz.* EATA-DMA SCSI DRIVER P: Michael Neuffer -L: linux-eata@i-connect.net, linux-scsi@vger.kernel.org +M: mike@i-Connect.Net +L: linux-eata@i-connect.net +L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/eata* @@ -1879,7 +1883,8 @@ F: drivers/scsi/eata.c EATA-PIO SCSI DRIVER P: Michael Neuffer M: mike@i-Connect.Net -L: linux-eata@i-connect.net, linux-scsi@vger.kernel.org +L: linux-eata@i-connect.net +L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/eata_pio.* @@ -1894,8 +1899,10 @@ F: include/linux/netfilter_bridge/ebt_*.h F: net/bridge/netfilter/ebt*.c ECRYPT FILE SYSTEM -P: Tyler Hicks, Dustin Kirkland -M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com +P: Tyler Hicks +M: tyhicks@linux.vnet.ibm.com +M: Dustin Kirkland +P: kirkland@canonical.com L: ecryptfs-devel@lists.launchpad.net W: https://launchpad.net/ecryptfs S: Supported @@ -2028,7 +2035,9 @@ F: drivers/scsi/lpfc/ EPSON 1355 FRAMEBUFFER DRIVER P: Christopher Hoover -M: ch@murgatroid.com, ch@hpl.hp.com +M: ch@murgatroid.com +P: Christopher Hoover +M: ch@hpl.hp.com S: Maintained F: drivers/video/epson1355fb.c @@ -2069,8 +2078,12 @@ F: fs/ext2/ F: include/linux/ext2* EXT3 FILE SYSTEM -P: Stephen Tweedie, Andrew Morton -M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com +P: Stephen Tweedie +M: sct@redhat.com +P: Andrew Morton +M: akpm@linux-foundation.org +P: Andreas Dilger +M: adilger@sun.com L: linux-ext4@vger.kernel.org S: Maintained F: Documentation/filesystems/ext3.txt @@ -2079,7 +2092,9 @@ F: include/linux/ext3* EXT4 FILE SYSTEM P: Theodore Ts'o -M: tytso@mit.edu, adilger@sun.com +M: tytso@mit.edu +P: Andreas Dilger +M: adilger@sun.com L: linux-ext4@vger.kernel.org W: http://ext4.wiki.kernel.org S: Maintained @@ -2131,9 +2146,11 @@ M: riku.vipio@iki.fi L: lm-sensors@lm-sensors.org S: Maintained -FIREWIRE SUBSYSTEM (drivers/firewire, ) -P: Kristian Hoegsberg, Stefan Richter -M: krh@redhat.com, stefanr@s5r6.in-berlin.de +FIREWIRE SUBSYSTEM +P: Kristian Hoegsberg +M: krh@redhat.com +P: Stefan Richter +M: stefanr@s5r6.in-berlin.de L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git @@ -2563,7 +2580,7 @@ M: perex@perex.cz S: Maintained F: drivers/net/hp100.* -HPET: High Precision Event Timers driver (drivers/char/hpet.c) +HPET: High Precision Event Timers driver P: Clemens Ladisch M: clemens@ladisch.de S: Maintained @@ -2583,7 +2600,7 @@ P: Vojtech Pavlik M: vojtech@suse.cz S: Maintained -HPET: ACPI hpet.c +HPET: ACPI P: Bob Picco M: bob.picco@hp.com S: Maintained @@ -2596,7 +2613,7 @@ W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi S: Maintained F: fs/hpfs/ -HSO 3G Modem Driver (hso.c) +HSO 3G MODEM DRIVER P: Denis Joseph Barrow M: d.barow@option.com W: http://www.pharscape.org @@ -2714,7 +2731,7 @@ L: linux-pm@lists.linux-foundation.org S: Supported F: drivers/idle/i7300_idle.c -IEEE 1394 SUBSYSTEM (drivers/ieee1394) +IEEE 1394 SUBSYSTEM P: Ben Collins M: ben.collins@ubuntu.com P: Stefan Richter @@ -2725,7 +2742,7 @@ T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git S: Maintained F: drivers/ieee1394/ -IEEE 1394 RAW I/O DRIVER (raw1394) +IEEE 1394 RAW I/O DRIVER P: Dan Dennedy M: dan@dennedy.org P: Stefan Richter @@ -3109,8 +3126,10 @@ F: include/linux/jffs2.h F: include/mtd/jffs2-user.h JOURNALLING LAYER FOR BLOCK DEVICES (JBD) -P: Stephen Tweedie, Andrew Morton -M: sct@redhat.com, akpm@linux-foundation.org +P: Stephen Tweedie +M: sct@redhat.com +P: Andrew Morton +M: akpm@linux-foundation.org L: linux-ext4@vger.kernel.org S: Maintained F: fs/jbd*/ @@ -3158,7 +3177,7 @@ L: autofs@linux.kernel.org S: Maintained F: fs/autofs4/ -KERNEL BUILD (kbuild: Makefile, scripts/Makefile.*) +KERNEL BUILD P: Sam Ravnborg M: sam@ravnborg.org T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-next.git @@ -4668,16 +4687,16 @@ S: Maintained F: drivers/net/wireless/rtl818* RTL8187 WIRELESS DRIVER -P: Herton Ronaldo Krzesinski -M: herton@mandriva.com.br -P: Hin-Tak Leung -M htl10@users.sourceforge.net -P: Larry Finger -M: Larry.Finger@lwfinger.net -L: linux-wireless@vger.kernel.org -W: http://linuxwireless.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git -S: Maintained +P: Herton Ronaldo Krzesinski +M: herton@mandriva.com.br +P: Hin-Tak Leung +M: htl10@users.sourceforge.net +P: Larry Finger +M: Larry.Finger@lwfinger.net +L: linux-wireless@vger.kernel.org +W: http://linuxwireless.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git +S: Maintained F: drivers/net/wireless/rtl818x/rtl8187* S3 SAVAGE FRAMEBUFFER DRIVER @@ -4871,7 +4890,6 @@ S: Maintained F: drivers/mmc/host/sdhci.* SECURITY SUBSYSTEM -F: security/ P: James Morris M: jmorris@namei.org L: linux-kernel@vger.kernel.org @@ -4879,6 +4897,7 @@ L: linux-security-module@vger.kernel.org (suggested Cc:) T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git W: http://security.wiki.kernel.org/ S: Supported +F: security/ SECURITY CONTACT P: Security Officers @@ -4893,7 +4912,7 @@ M: jmorris@namei.org P: Eric Paris M: eparis@parisplace.org L: linux-kernel@vger.kernel.org (kernel issues) -L: selinux@tycho.nsa.gov (subscribers-only, general discussion) +L: selinux@tycho.nsa.gov (subscribers-only, general discussion) W: http://selinuxproject.org T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git S: Supported @@ -4917,11 +4936,11 @@ S: Supported SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER P: Sathya Perla M: sathyap@serverengines.com -P: Subbu Seetharaman -M: subbus@serverengines.com -L: netdev@vger.kernel.org -W: http://www.serverengines.com -S: Supported +P: Subbu Seetharaman +M: subbus@serverengines.com +L: netdev@vger.kernel.org +W: http://www.serverengines.com +S: Supported F: drivers/net/benet/ SFC NETWORK DRIVER @@ -5190,7 +5209,7 @@ F: arch/sparc/ SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER P: Roger Wolff M: R.E.Wolff@BitWizard.nl -L: linux-kernel@vger.kernel.org ? +L: linux-kernel@vger.kernel.org S: Supported F: Documentation/serial/specialix.txt F: drivers/char/specialix* -- cgit v0.10.2 From 121ea2304436ddd0144b34d3616e552f2620e0dd Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 21:00:22 -0700 Subject: MAINTAINERS - Remove HP Fibre Channel HBA no longer in tree Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 641ffc1..ae099b3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2460,12 +2460,6 @@ S: Maintained F: Documentation/serial/hayes-esp.txt F: drivers/char/esp.c -HEWLETT-PACKARD FIBRE CHANNEL 64-bit/66MHz PCI non-intelligent HBA -P: Chirag Kantharia -M: chirag.kantharia@hp.com -L: iss_storagedev@hp.com -S: Maintained - HEWLETT-PACKARD SMART2 RAID DRIVER P: Chirag Kantharia M: chirag.kantharia@hp.com -- cgit v0.10.2 From 54e5881d0cd75821a48b1bf0977d06fba7cf1670 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 21:08:10 -0700 Subject: MAINTAINERS - standardize "T: git urls" Various forms of "T: git" entries exist: git kernel.org:/ git kernel.org/ git://git.kernel.org/ Standardize on "T: git git://git.kernel.org/" where appropriate Fix a few bad git path entries Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index ae099b3..32956d5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -180,7 +180,7 @@ P: Latchesar Ionkov M: lucho@ionkov.net L: v9fs-developer@lists.sourceforge.net W: http://swik.net/v9fs -T: git kernel.org:/pub/scm/linux/kernel/ericvh/v9fs.git +T: git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git S: Maintained F: Documentation/filesystems/9p.txt F: fs/9p/ @@ -235,7 +235,7 @@ P: Len Brown M: lenb@kernel.org L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ -T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git S: Supported F: drivers/acpi/ F: drivers/pnp/pnpacpi/ @@ -327,7 +327,7 @@ P: Michael Wu M: flamingice@sourmilk.net L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git S: Maintained F: drivers/net/wireless/adm8211.* @@ -370,7 +370,7 @@ F: net/rxrpc/af_rxrpc.c AGPGART DRIVER P: David Airlie M: airlied@linux.ie -T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained F: drivers/char/agp/ F: include/linux/agp* @@ -454,7 +454,7 @@ AMD IOMMU (AMD-VI) P: Joerg Roedel M: joerg.roedel@amd.com L: iommu@lists.linux-foundation.org -T: git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git S: Supported F: arch/x86/kernel/amd_iommu*.c F: arch/x86/include/asm/amd_iommu*.h @@ -607,7 +607,7 @@ ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE P: Paulius Zaleckas M: paulius.zaleckas@teltonika.lt L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -T: git gitorious.org/linux-gemini/mainline.git +T: git git://gitorious.org/linux-gemini/mainline.git S: Maintained ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6) @@ -990,7 +990,7 @@ P: Eric Paris M: eparis@redhat.com L: linux-audit@redhat.com (subscribers-only) W: http://people.redhat.com/sgrubb/audit/ -T: git git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git S: Maintained F: include/linux/audit.h F: kernel/audit* @@ -1134,7 +1134,7 @@ BLOCK LAYER P: Jens Axboe M: axboe@kernel.dk L: linux-kernel@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git S: Maintained F: block/ @@ -1158,7 +1158,7 @@ P: Marcel Holtmann M: marcel@holtmann.org L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git S: Maintained F: net/bluetooth/ F: include/net/bluetooth/ @@ -1223,7 +1223,7 @@ P: Chris Mason M: chris.mason@oracle.com L: linux-btrfs@vger.kernel.org W: http://btrfs.wiki.kernel.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git S: Maintained F: Documentation/filesystems/btrfs.txt F: fs/btrfs/ @@ -1233,7 +1233,7 @@ P: Mauro Carvalho Chehab M: mchehab@infradead.org L: linux-media@vger.kernel.org W: http://linuxtv.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: Documentation/video4linux/bttv/ F: drivers/media/video/bt8xx/bttv* @@ -1242,7 +1242,7 @@ CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER P: Jonathan Corbet M: corbet@lwn.net L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: Documentation/video4linux/cafe_ccic F: drivers/media/video/cafe_ccic* @@ -1390,7 +1390,7 @@ M: sfrench@samba.org L: linux-cifs-client@lists.samba.org L: samba-technical@lists.samba.org W: http://linux-cifs.samba.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git S: Supported F: Documentation/filesystems/cifs.txt F: fs/cifs/ @@ -1479,7 +1479,7 @@ P: Dave Jones M: davej@redhat.com L: cpufreq@vger.kernel.org W: http://www.codemonkey.org.uk/projects/cpufreq/ -T: git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git S: Maintained F: arch/x86/kernel/cpu/cpufreq/ F: drivers/cpufreq/ @@ -1525,7 +1525,7 @@ M: herbert@gondor.apana.org.au P: David S. Miller M: davem@davemloft.net L: linux-crypto@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git S: Maintained F: Documentation/crypto/ F: arch/*/crypto/ @@ -1553,7 +1553,7 @@ M: awalls@radix.net L: ivtv-devel@ivtvdriver.org L: ivtv-users@ivtvdriver.org L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://linuxtv.org S: Maintained F: Documentation/video4linux/cx18.txt @@ -1763,7 +1763,7 @@ P: David Teigland M: teigland@redhat.com L: cluster-devel@redhat.com W: http://sources.redhat.com/cluster/ -T: git kernel.org:/pub/scm/linux/kernel/git/teigland/dlm.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git S: Supported F: fs/dlm/ @@ -1837,7 +1837,7 @@ DRM DRIVERS P: David Airlie M: airlied@linux.ie L: dri-devel@lists.sourceforge.net -T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained F: drivers/gpu/drm/ @@ -1852,7 +1852,7 @@ DVB SUBSYSTEM AND DRIVERS P: LinuxTV.org Project M: linux-media@vger.kernel.org W: http://linuxtv.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: Documentation/dvb/ F: drivers/media/dvb/ @@ -2153,7 +2153,7 @@ P: Stefan Richter M: stefanr@s5r6.in-berlin.de L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git S: Maintained F: drivers/firewire/ F: include/linux/firewire*.h @@ -2358,8 +2358,8 @@ P: Steven Whitehouse M: swhiteho@redhat.com L: cluster-devel@redhat.com W: http://sources.redhat.com/cluster/ -T: git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git -T: git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw.git S: Supported F: Documentation/filesystems/gfs2*.txt F: fs/gfs2/ @@ -2395,7 +2395,7 @@ GSPCA FINEPIX SUBDRIVER P: Frank Zago M: frank@zago.net L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/finepix.c @@ -2403,7 +2403,7 @@ GSPCA M5602 SUBDRIVER P: Erik Andren M: erik.andren@gmail.com L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/m5602/ @@ -2411,7 +2411,7 @@ GSPCA PAC207 SONIXB SUBDRIVER P: Hans de Goede M: hdegoede@redhat.com L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/pac207.c @@ -2419,7 +2419,7 @@ GSPCA T613 SUBDRIVER P: Leandro Costantino M: lcostantino@gmail.com L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/t613.c @@ -2428,7 +2428,7 @@ P: Jean-Francois Moine M: moinejf@free.fr W: http://moinejf.free.fr L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/ @@ -2513,7 +2513,7 @@ HID CORE LAYER P: Jiri Kosina M: jkosina@suse.cz L: linux-input@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained F: drivers/hid/ F: include/linux/hid* @@ -2667,7 +2667,7 @@ F: arch/x86/boot/ i386 SETUP CODE / CPU ERRATA WORKAROUNDS P: H. Peter Anvin M: hpa@zytor.com -T: git.kernel.org:/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git S: Maintained IA64 (Itanium) PLATFORM @@ -2675,7 +2675,7 @@ P: Tony Luck M: tony.luck@intel.com L: linux-ia64@vger.kernel.org W: http://www.ia64-linux.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git S: Maintained F: arch/ia64/ @@ -2732,7 +2732,7 @@ P: Stefan Richter M: stefanr@s5r6.in-berlin.de L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git S: Maintained F: drivers/ieee1394/ @@ -2765,7 +2765,7 @@ P: Hal Rosenstock M: hal.rosenstock@gmail.com L: general@lists.openfabrics.org (moderated for non-subscribers) W: http://www.openib.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git S: Supported F: Documentation/infiniband/ F: drivers/infiniband/ @@ -2787,7 +2787,7 @@ P: Dmitry Torokhov M: dmitry.torokhov@gmail.com M: dtor@mail.ru L: linux-input@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git S: Maintained F: drivers/input/ @@ -2832,7 +2832,7 @@ INTEL IOMMU (VT-d) P: David Woodhouse M: dwmw2@infradead.org L: iommu@lists.linux-foundation.org -T: git://git.infradead.org/iommu-2.6.git +T: git git://git.infradead.org/iommu-2.6.git S: Supported F: drivers/pci/intel-iommu.c F: include/linux/intel-iommu.h @@ -2938,7 +2938,7 @@ M: reinette.chatre@intel.com L: linux-wireless@vger.kernel.org L: ipw3945-devel@lists.sourceforge.net W: http://intellinuxwireless.org -T: git kernel.org:/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git S: Supported F: drivers/net/wireless/iwlwifi/ @@ -3018,7 +3018,7 @@ M: jkosina@suse.cz P: David Sterba M: dsterba@suse.cz S: Maintained -T: git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git F: drivers/char/pcmcia/ipwireless/ IPX NETWORK LAYER @@ -3054,7 +3054,7 @@ P: Mike Christie M: michaelc@cs.wisc.edu L: open-iscsi@googlegroups.com W: www.open-iscsi.org -T: git kernel.org:/pub/scm/linux/kernel/mnc/linux-2.6-iscsi.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git S: Maintained F: drivers/scsi/*iscsi* F: include/scsi/*iscsi* @@ -3064,7 +3064,7 @@ P: Karsten Keil M: isdn@linux-pingi.de L: isdn4linux@listserv.isdn4linux.de (subscribers-only) W: http://www.isdn4linux.de -T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git S: Maintained F: Documentation/isdn/ F: drivers/isdn/ @@ -3085,7 +3085,7 @@ M: hverkuil@xs4all.nl L: ivtv-devel@ivtvdriver.org L: ivtv-users@ivtvdriver.org L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.ivtvdriver.org S: Maintained F: Documentation/video4linux/*.ivtv @@ -3097,7 +3097,7 @@ P: Dave Kleikamp M: shaggy@austin.ibm.com L: jfs-discussion@lists.sourceforge.net W: http://jfs.sourceforge.net/ -T: git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git S: Supported F: Documentation/filesystems/jfs.txt F: fs/jfs/ @@ -3174,8 +3174,8 @@ F: fs/autofs4/ KERNEL BUILD P: Sam Ravnborg M: sam@ravnborg.org -T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-next.git -T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-fixes.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git L: linux-kbuild@vger.kernel.org S: Maintained F: Documentation/kbuild/ @@ -3375,7 +3375,7 @@ P: Paul Mackerras M: paulus@samba.org W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org -T: git kernel.org:/pub/scm/linux/kernel/git/benh/powerpc.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git S: Supported LINUX FOR POWER MACINTOSH @@ -3400,7 +3400,7 @@ P: Matt Porter M: mporter@kernel.crashing.org W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org -T: git kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git S: Maintained LINUX FOR POWERPC EMBEDDED XILINX VIRTEX @@ -3437,7 +3437,7 @@ LINUX SECURITY MODULE (LSM) FRAMEWORK P: Chris Wright M: chrisw@sous-sol.org L: linux-security-module@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git S: Supported LLC (802.2) @@ -3477,7 +3477,7 @@ M: peterz@infradead.org P: Ingo Molnar M: mingo@redhat.com L: linux-kernel@vger.kernel.org -T: git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git S: Maintained F: Documentation/lockdep*.txt F: Documentation/lockstat.txt @@ -3517,7 +3517,7 @@ P: Mike Frysinger M: vapier@gentoo.org L: ltp-list@lists.sourceforge.net (subscribers-only) W: http://ltp.sourceforge.net/ -T: git kernel.org/pub/scm/linux/kernel/git/galak/ltp.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git S: Maintained M32R ARCHITECTURE @@ -3537,7 +3537,7 @@ P: Roman Zippel M: zippel@linux-m68k.org L: linux-m68k@lists.linux-m68k.org W: http://www.linux-m68k.org/ -T: git git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git S: Maintained F: arch/m68k/ @@ -3560,7 +3560,7 @@ P: Johannes Berg M: johannes@sipsolutions.net L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git S: Maintained F: Documentation/networking/mac80211-injection.txt F: include/net/mac80211.h @@ -3573,7 +3573,7 @@ P: Mattias Nissler M: mattias.nissler@gmx.de L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID -T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git S: Maintained F: net/mac80211/rc80211_pid* @@ -3689,7 +3689,7 @@ P: Ralf Baechle M: ralf@linux-mips.org W: http://www.linux-mips.org/ L: linux-mips@linux-mips.org -T: git www.linux-mips.org:/pub/scm/linux.git +T: git git://git.linux-mips.org/pub/scm/linux.git S: Supported F: Documentation/mips/ F: arch/mips/ @@ -3756,7 +3756,7 @@ MULTIFUNCTION DEVICES (MFD) P: Samuel Ortiz M: sameo@linux.intel.com L: linux-kernel@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/sameo/mfd-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git S: Supported F: drivers/mfd/ @@ -3795,7 +3795,7 @@ MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER P: Felipe Balbi M: felipe.balbi@nokia.com L: linux-usb@vger.kernel.org -T: git gitorious.org:/musb/mainline.git +T: git git://gitorious.org/musb/mainline.git S: Maintained F: drivers/usb/musb/ @@ -3917,7 +3917,7 @@ NETWORK DEVICE DRIVERS P: Jeff Garzik M: jgarzik@pobox.com L: netdev@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git S: Maintained F: drivers/net/ @@ -3944,7 +3944,7 @@ M: yoshfuji@linux-ipv6.org P: Patrick McHardy M: kaber@trash.net L: netdev@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained F: net/ipv4/ F: net/ipv6/ @@ -3960,7 +3960,7 @@ NETWORKING [WIRELESS] P: John W. Linville M: linville@tuxdriver.com L: linux-wireless@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git S: Maintained F: net/wireless/ F: include/net/ieee80211* @@ -4032,7 +4032,7 @@ M: aia21@cantab.net L: linux-ntfs-dev@lists.sourceforge.net L: linux-kernel@vger.kernel.org W: http://www.linux-ntfs.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git S: Maintained F: Documentation/filesystems/ntfs.txt F: fs/ntfs/ @@ -4070,7 +4070,7 @@ OMNIVISION OV7670 SENSOR DRIVER P: Jonathan Corbet M: corbet@lwn.net L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/ov7670.c @@ -4140,7 +4140,7 @@ P: Benny Halevy M: bhalevy@panasas.com L: osd-dev@open-osd.org W: http://open-osd.org -T: git://git.open-osd.org/open-osd.git +T: git git://git.open-osd.org/open-osd.git S: Maintained P54 WIRELESS DRIVER @@ -4148,7 +4148,7 @@ P: Michael Wu M: flamingice@sourmilk.net L: linux-wireless@vger.kernel.org W: http://prism54.org -T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git S: Maintained F: drivers/net/wireless/p54/ @@ -4224,7 +4224,7 @@ P: Helge Deller M: deller@gmx.de L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git S: Maintained F: arch/parisc/ F: drivers/parisc/ @@ -4262,7 +4262,7 @@ P: Jesse Barnes M: jbarnes@virtuousgeek.org L: linux-kernel@vger.kernel.org L: linux-pci@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git S: Supported F: Documentation/PCI/ F: drivers/pci/ @@ -4279,7 +4279,7 @@ PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org W: http://lists.infradead.org/mailman/listinfo/linux-pcmcia -T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git S: Maintained F: Documentation/pcmcia/ F: drivers/pcmcia/ @@ -4337,7 +4337,7 @@ M: cbou@mail.ru P: David Woodhouse M: dwmw2@infradead.org L: linux-kernel@vger.kernel.org -T: git git.infradead.org/battery-2.6.git +T: git git://git.infradead.org/battery-2.6.git S: Maintained F: include/linux/power_supply.h F: drivers/power/power_supply* @@ -4450,7 +4450,7 @@ M: isely@pobox.com L: pvrusb2@isely.net (subscribers-only) L: linux-media@vger.kernel.org W: http://www.isely.net/pvrusb2/ -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: Documentation/video4linux/README.pvrusb2 F: drivers/media/video/pvrusb2/ @@ -4475,14 +4475,14 @@ M: eric.miao@marvell.com P: Jason Chagas M: jason.chagas@marvell.com L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -T: git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git S: Supported PXA910 SUPPORT P: Eric Miao M: eric.miao@marvell.com L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -T: git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git S: Supported PXA MMCI DRIVER @@ -4549,7 +4549,7 @@ L: linux-wireless@vger.kernel.org L: users@rt2x00.serialmonkey.com W: http://rt2x00.serialmonkey.com/ S: Maintained -T: git kernel.org:/pub/scm/linux/kernel/git/ivd/rt2x00.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git F: drivers/net/wireless/rt2x00/ RAMDISK RAM BLOCK DEVICE DRIVER @@ -4676,7 +4676,7 @@ P: John W. Linville M: linville@tuxdriver.com L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git S: Maintained F: drivers/net/wireless/rtl818* @@ -4689,7 +4689,7 @@ P: Larry Finger M: Larry.Finger@lwfinger.net L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git S: Maintained F: drivers/net/wireless/rtl818x/rtl8187* @@ -4766,7 +4766,7 @@ SAA7146 VIDEO4LINUX-2 DRIVER P: Michael Hunold M: michael@mihu.de L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.mihu.de/linux/saa7146 S: Maintained F: drivers/media/common/saa7146* @@ -4810,9 +4810,9 @@ SCSI SUBSYSTEM P: James E.J. Bottomley M: James.Bottomley@HansenPartnership.com L: linux-scsi@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git -T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git -T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-pending-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-pending-2.6.git S: Maintained F: drivers/scsi/ F: include/scsi/ @@ -4888,7 +4888,7 @@ P: James Morris M: jmorris@namei.org L: linux-kernel@vger.kernel.org L: linux-security-module@vger.kernel.org (suggested Cc:) -T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git +T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git W: http://security.wiki.kernel.org/ S: Supported F: security/ @@ -4908,7 +4908,7 @@ M: eparis@parisplace.org L: linux-kernel@vger.kernel.org (kernel issues) L: selinux@tycho.nsa.gov (subscribers-only, general discussion) W: http://selinuxproject.org -T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git S: Supported F: include/linux/selinux* F: security/selinux/ @@ -4924,7 +4924,7 @@ SERIAL ATA (SATA) SUBSYSTEM P: Jeff Garzik M: jgarzik@pobox.com L: linux-ide@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git S: Supported SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER @@ -5118,7 +5118,7 @@ SOC-CAMERA V4L2 SUBSYSTEM P: Guennadi Liakhovetski M: g.liakhovetski@gmx.de L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: include/media/v4l2* F: drivers/media/video/v4l2* @@ -5185,7 +5185,7 @@ P: Liam Girdwood M: lrg@slimlogic.co.uk P: Mark Brown M: broonie@opensource.wolfsonmicro.com -T: git opensource.wolfsonmicro.com/linux-2.6-asoc +T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc L: alsa-devel@alsa-project.org (subscribers-only) W: http://alsa-project.org/main/index.php/ASoC S: Supported @@ -5195,8 +5195,8 @@ SPARC + UltraSPARC (sparc/sparc64) P: David S. Miller M: davem@davemloft.net L: sparclinux@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git -T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git S: Maintained F: arch/sparc/ @@ -5302,7 +5302,7 @@ P: Paul Mundt M: lethal@linux-sh.org L: linux-sh@vger.kernel.org W: http://www.linux-sh.org -T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git S: Supported F: arch/sh/ @@ -5394,7 +5394,7 @@ M: ibm-acpi@hmh.eng.br L: ibm-acpi-devel@lists.sourceforge.net W: http://ibm-acpi.sourceforge.net W: http://thinkwiki.org/wiki/Ibm-acpi -T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git +T: git git://repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git S: Maintained F: drivers/platform/x86/thinkpad_acpi.c @@ -5430,7 +5430,7 @@ M: allan.stephens@windriver.com L: tipc-discussion@lists.sourceforge.net W: http://tipc.sourceforge.net/ W: http://tipc.cslab.ericsson.net/ -T: git tipc.cslab.ericsson.net:/pub/git/tipc.git +T: git git://tipc.cslab.ericsson.net/pub/git/tipc.git S: Maintained F: include/linux/tipc*.h F: include/net/tipc/ @@ -5494,7 +5494,7 @@ TRIVIAL PATCHES P: Jiri Kosina M: trivial@kernel.org L: linux-kernel@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/jikos/trivial.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git S: Maintained TTY LAYER @@ -5668,7 +5668,7 @@ P: Luca Risolia M: luca.risolia@studio.unibo.it L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.linux-projects.org S: Maintained F: drivers/media/video/et61x251/ @@ -5686,7 +5686,7 @@ USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...) P: Jiri Kosina M: jkosina@suse.cz L: linux-usb@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained F: Documentation/usb/hiddev.txt F: drivers/hid/usbhid/ @@ -5848,7 +5848,7 @@ P: Luca Risolia M: luca.risolia@studio.unibo.it L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.linux-projects.org S: Maintained F: Documentation/video4linux/sn9c102.txt @@ -5888,7 +5888,7 @@ P: Laurent Pinchart M: laurent.pinchart@skynet.be L: linux-uvc-devel@lists.berlios.de (subscribers-only) L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://linux-uvc.berlios.de S: Maintained F: drivers/media/video/uvc/ @@ -5898,7 +5898,7 @@ P: Luca Risolia M: luca.risolia@studio.unibo.it L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.linux-projects.org S: Maintained F: Documentation/video4linux/w9968cf.txt @@ -5916,7 +5916,7 @@ P: Luca Risolia M: luca.risolia@studio.unibo.it L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://www.linux-projects.org S: Maintained F: Documentation/video4linux/zc0301.txt @@ -5935,7 +5935,7 @@ P: Antoine Jacquet M: royale@zerezo.com L: linux-usb@vger.kernel.org L: linux-media@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git W: http://royale.zerezo.com/zr364xx/ S: Maintained F: Documentation/video4linux/zr364xx.txt @@ -5969,7 +5969,7 @@ P: Karel Zak M: kzak@redhat.com L: util-linux-ng@vger.kernel.org W: http://kernel.org/~kzak/util-linux-ng/ -T: git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git +T: git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git S: Maintained UVESAFB DRIVER @@ -6024,7 +6024,7 @@ P: Mauro Carvalho Chehab M: mchehab@infradead.org L: linux-media@vger.kernel.org W: http://linuxtv.org -T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: Documentation/video4linux/ F: drivers/media/video/ @@ -6049,7 +6049,7 @@ P: Mark Brown M: broonie@opensource.wolfsonmicro.com W: http://opensource.wolfsonmicro.com/node/15 W: http://www.slimlogic.co.uk/?p=48 -T: git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git S: Supported F: drivers/regulator/ F: include/linux/regulator/ @@ -6102,7 +6102,7 @@ F: drivers/mmc/host/wbsd.* WATCHDOG DEVICE DRIVERS P: Wim Van Sebroeck M: wim@iguana.be -T: git kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git S: Maintained F: Documentation/watchdog/ F: drivers/watchdog/ @@ -6183,7 +6183,7 @@ P: H. Peter Anvin M: hpa@zytor.com M: x86@kernel.org L: linux-kernel@vger.kernel.org -T: git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git S: Maintained F: Documentation/x86/ F: arch/x86/ @@ -6209,7 +6209,7 @@ M: felixb@sgi.com M: xfs-masters@oss.sgi.com L: xfs@oss.sgi.com W: http://oss.sgi.com/projects/xfs -T: git://oss.sgi.com/xfs/xfs.git +T: git git://oss.sgi.com/xfs/xfs.git S: Supported F: Documentation/filesystems/xfs.txt F: fs/xfs/ -- cgit v0.10.2 From cfe81f76c8372175b3c9aeb4fd983f3ef246473a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 21:09:58 -0700 Subject: MAINTAINERS - Add Linus Torvalds' git Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 32956d5..b38e614 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6283,4 +6283,5 @@ F: drivers/serial/zs.* THE REST P: Linus Torvalds +T: git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git S: Buried alive in reporters -- cgit v0.10.2 From 932d18729dd0677472a7f1aea9820010df558c93 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 21:10:58 -0700 Subject: MAINTAINERS - i2c_tiny_usb T: should be W: Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index b38e614..9120f42 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2653,7 +2653,7 @@ I2C-TINY-USB DRIVER P: Till Harbaum M: till@harbaum.org L: linux-i2c@vger.kernel.org -T: http://www.harbaum.org/till/i2c_tiny_usb +W: http://www.harbaum.org/till/i2c_tiny_usb S: Maintained F: drivers/i2c/busses/i2c-tiny-usb.c -- cgit v0.10.2 From e769980feee8d4f5630aec9e06b03047aea0b9e7 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 21:12:18 -0700 Subject: MAINTAINERS - Update FPU Emulator contact address and web page Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 9120f42..de65e98 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2167,8 +2167,8 @@ F: include/linux/firmware.h FPU EMULATOR P: Bill Metzenthen -M: billm@suburbia.net -W: http://suburbia.net/~billm/floating-point/emulator/ +M: billm@melbpc.org.au +W: http://floatingpoint.sourceforge.net/emulator/index.html S: Maintained F: arch/x86/math-emu/ -- cgit v0.10.2 From 8ed01bbb89c943f714bdf4876f749b1b01792f65 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 21:13:49 -0700 Subject: MAINTAINERS - Remove x86/Voyager no longer in tree Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index de65e98..2c2a3bf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3362,12 +3362,6 @@ M: paulus@au.ibm.com W: http://www.ibm.com/linux/ltc/projects/ppc S: Supported -LINUX FOR NCR VOYAGER -P: James Bottomley -M: James.Bottomley@HansenPartnership.com -W: http://www.hansenpartnership.com/voyager -S: Maintained - LINUX FOR POWERPC (32-BIT AND 64-BIT) P: Benjamin Herrenschmidt M: benh@kernel.crashing.org -- cgit v0.10.2 From 0632973db2dc161868b2877f77bd72982d2f7017 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 7 Apr 2009 21:15:03 -0700 Subject: MAINTAINERS - Remove cyblafb frame buffer no longer in tree Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 2c2a3bf..85819e6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1582,12 +1582,6 @@ W: http://www.arm.linux.org.uk/ S: Maintained F: drivers/video/cyber2000fb.* -CYBLAFB FRAMEBUFFER DRIVER -P: Knut Petersen -M: Knut_Petersen@t-online.de -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) -S: Maintained - CYCLADES 2X SYNC CARD DRIVER P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net -- cgit v0.10.2 From 127c49ae097952b9686038392f862d69ac6a9c6a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 8 Apr 2009 08:34:04 -0700 Subject: MAINTAINERS - Coalesce sections "DVB" and "Video for Linux" Creating new section MEDIA INPUT INFRASTRUCTURE Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 85819e6..f37a1e0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1842,17 +1842,6 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/wan/dscc4.c -DVB SUBSYSTEM AND DRIVERS -P: LinuxTV.org Project -M: linux-media@vger.kernel.org -W: http://linuxtv.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git -S: Maintained -F: Documentation/dvb/ -F: drivers/media/dvb/ -F: drivers/media/common/saa7146*.c -F: include/linux/dvb/ - DZ DECSTATION DZ11 SERIAL DRIVER P: Maciej W. Rozycki M: macro@linux-mips.org @@ -3625,6 +3614,21 @@ S: Maintained F: Documentation/hwmon/max6650 F: drivers/hwmon/max6650.c +MEDIA INPUT INFRASTRUCTURE (V4L/DVB) +P: Mauro Carvalho Chehab +M: mchehab@infradead.org +P: LinuxTV.org Project +L: linux-media@vger.kernel.org +W: http://linuxtv.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +S: Maintained +F: Documentation/dvb/ +F: Documentation/video4linux/ +F: drivers/media/ +F: include/media/ +F: include/linux/dvb/ +F: include/linux/videodev*.h + MEGARAID SCSI DRIVERS P: Neela Syam Kolli M: megaraidlinux@lsi.com @@ -6007,20 +6011,6 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/via-velocity.* -VIDEO FOR LINUX (V4L) -P: Mauro Carvalho Chehab -M: mchehab@infradead.org -L: linux-media@vger.kernel.org -W: http://linuxtv.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git -S: Maintained -F: Documentation/video4linux/ -F: drivers/media/video/ -F: drivers/media/radio/ -F: include/linux/videodev.h -F: include/linux/videodev2.h -F: include/media/ - VLAN (802.1Q) P: Patrick McHardy M: kaber@trash.net -- cgit v0.10.2 From 9db35182b9528339a4655f4b894ac3305e0c3ac6 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 8 Apr 2009 08:39:56 -0700 Subject: MAINTAINERS - Update M68K patterns Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index f37a1e0..0499a21 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3517,6 +3517,7 @@ W: http://www.linux-m68k.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git S: Maintained F: arch/m68k/ +F: drivers/zorro/ M68K ON APPLE MACINTOSH P: Joshua Thompson @@ -3524,6 +3525,7 @@ M: funaho@jurai.org W: http://www.mac.linux-m68k.org/ L: linux-m68k@lists.linux-m68k.org S: Maintained +F: arch/m68k/mac/ M68K ON HP9000/300 P: Philip Blundell -- cgit v0.10.2 From 7cfc51b9d379c9b653b64791d8c6561ff61269c0 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 8 Apr 2009 10:04:18 -0700 Subject: MAINTAINERS - Update DRIVER CORE patterns Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 0499a21..45d3897 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1822,7 +1822,7 @@ L: linux-kernel@vger.kernel.org T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported F: Documentation/kobject.txt -F: drivers/base/core.c +F: drivers/base/ F: fs/sysfs/ F: include/linux/kobj* F: lib/kobj* -- cgit v0.10.2 From 80811493329eb0034e06edd0de0d448660077687 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 8 Apr 2009 20:20:27 -0700 Subject: MAINTAINERS - Add missing "/" to some pattern directories Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 45d3897..9b28eb9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3138,7 +3138,7 @@ L: kexec@lists.infradead.org L: linux-kernel@vger.kernel.org W: http://lse.sourceforge.net/kdump/ S: Maintained -F: Documentation/kdump +F: Documentation/kdump/ KERNEL AUTOMOUNTER (AUTOFS) P: H. Peter Anvin @@ -3239,7 +3239,7 @@ W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported F: Documentation/s390/kvm.txt F: arch/s390/include/asm/kvm* -F: arch/s390/kvm +F: arch/s390/kvm/ KEXEC P: Eric Biederman @@ -3885,7 +3885,7 @@ M: paul.moore@hp.com W: http://netlabel.sf.net L: netdev@vger.kernel.org S: Supported -F: Documentation/netlabel +F: Documentation/netlabel/ F: include/net/netlabel.h F: net/netlabel/ @@ -4518,7 +4518,7 @@ M: al@alarsen.net L: linux-kernel@vger.kernel.org W: http://www.alarsen.net/linux/qnx4fs/ S: Maintained -F: fs/qnx4 +F: fs/qnx4/ F: include/linux/qnx4_fs.h F: include/linux/qnxtypes.h @@ -4641,7 +4641,8 @@ P: Ivo van Doorn M: IvDoorn@gmail.com L: netdev@vger.kernel.org S: Maintained -F: net/rfkill +F Documentation/rfkill.txt +F: net/rfkill/ RISCOM8 DRIVER S: Orphan @@ -5597,7 +5598,7 @@ W: http://www.linux-mtd.infradead.org/ L: linux-mtd@lists.infradead.org T: git git://git.infradead.org/ubi-2.6.git S: Maintained -F: drivers/mtd/ubi +F: drivers/mtd/ubi/ F: include/linux/mtd/ubi.h F: include/mtd/ubi-user.h -- cgit v0.10.2 From d5ca6918bc9f336fcbdca430697f5cac150f9376 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 9 Apr 2009 02:42:01 -0700 Subject: MAINTAINERS - Add additional patterns for sections: FINTEK F75375S HARDWARE MONITOR PCA9532 LED DRIVER S390 ZCRYPT DRIVER SERIAL ATA (SATA) SUBSYSTEM TMIO MMC DRIVER Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 9b28eb9..156558c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2128,6 +2128,8 @@ P: Riku Voipio M: riku.vipio@iki.fi L: lm-sensors@lm-sensors.org S: Maintained +F: drivers/hwmon/f75375s.c +F: include/linux/f75375s.h FIREWIRE SUBSYSTEM P: Kristian Hoegsberg @@ -4241,6 +4243,8 @@ PCA9532 LED DRIVER P: Riku Voipio M: riku.voipio@iki.fi S: Maintained +F: drivers/leds/leds-pca9532.c +F: include/linux/leds-pca9532.h PCI ERROR RECOVERY P: Linas Vepstas @@ -4725,6 +4729,7 @@ M: ralph.wuerthner@de.ibm.com M: linux390@de.ibm.com L: linux-s390@vger.kernel.org S: Supported +F: drivers/s390/crypto/ S390 ZFCP DRIVER P: Christof Schmitt @@ -4921,6 +4926,9 @@ M: jgarzik@pobox.com L: linux-ide@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git S: Supported +F: drivers/ata/ +F: include/linux/ata.h +F: include/linux/libata.h SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER P: Sathya Perla @@ -5471,6 +5479,7 @@ TMIO MMC DRIVER P: Ian Molton M: ian@mnementh.co.uk S: Maintained +F: drivers/mmc/host/tmio_mmc.* TPM DEVICE DRIVER P: Debora Velarde -- cgit v0.10.2 From 69aefcead5da3bb9e4aa7e80a3b6da531560c7dc Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 9 Apr 2009 10:39:22 -0700 Subject: MAINTAINERS - Update Freescale sound patterns Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 156558c..42fd096 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1362,7 +1362,6 @@ M: timur@freescale.com L: alsa-devel@alsa-project.org S: Supported F: sound/soc/codecs/cs4270* -F: sound/soc/fsl/mpc8610_hpcd.c CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER P: Cirrus Logic Corporation (kernel 2.2 driver) @@ -2250,7 +2249,8 @@ M: timur@freescale.com L: alsa-devel@alsa-project.org L: linuxppc-dev@ozlabs.org S: Supported -F: sound/soc/fsl/ +F: sound/soc/fsl/fsl* +F: sound/soc/fsl/mpc8610_hpcd.c FREEVXFS FILESYSTEM P: Christoph Hellwig -- cgit v0.10.2 From 4a7fdb5f51a4d9228b0ff93494b95f72be5e904a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 10 Apr 2009 12:28:57 -0700 Subject: scripts/get_maintainer.pl - Allow multiple files on command line Improve handling of "by:" signoffs Sorting and frequency checks are done by name/email, not by "by:" tag. Signed-off-by: Joe Perches diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 0f3c0a5..60dc0c4 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.14'; +my $V = '0.15'; use Getopt::Long qw(:config no_auto_abbrev); @@ -34,7 +34,7 @@ my $scm = 0; my $web = 0; my $subsystem = 0; my $status = 0; -my $onefile = 0; +my $from_filename = 0; my $version = 0; my $help = 0; @@ -72,7 +72,7 @@ if (!GetOptions( 'status!' => \$status, 'scm!' => \$scm, 'web!' => \$web, - 'f|file' => \$onefile, + 'f|file' => \$from_filename, 'v|version' => \$version, 'h|help' => \$help, )) { @@ -90,8 +90,6 @@ if ($version != 0) { exit 0; } -my $infile = $ARGV[0]; - if ($#ARGV < 0) { usage(); die "$P: argument missing: patchfile or -f file please\n"; @@ -139,32 +137,35 @@ while () { } close(MAINT); -## use the filename on the command line or find the filenames in the patchfile +## use the filenames on the command line or find the filenames in the patchfiles my @files = (); -if ($onefile) { - if (!(-f $infile)) { - die "$P: file '${infile}' not found\n"; +foreach my $file (@ARGV) { + next if ((-d $file)); + if (!(-f $file)) { + die "$P: file '${file}' not found\n"; } - push(@files, $infile); -} else { - open(PATCH, "<$infile") or die "$P: Can't open ${infile}\n"; - while () { - if (m/^\+\+\+\s+(\S+)/) { - my $file = $1; - $file =~ s@^[^/]*/@@; - $file =~ s@\n@@; - push(@files, $file); + if ($from_filename) { + push(@files, $file); + } else { + my $file_cnt = @files; + open(PATCH, "<$file") or die "$P: Can't open ${file}\n"; + while () { + if (m/^\+\+\+\s+(\S+)/) { + my $filename = $1; + $filename =~ s@^[^/]*/@@; + $filename =~ s@\n@@; + push(@files, $filename); + } } + close(PATCH); + if ($file_cnt == @files) { + die "$P: file '${file}' doesn't appear to be a patch. " + . "Add -f to options?\n"; + } + @files = sort_and_uniq(@files); } - close(PATCH); - my $file_cnt = @files; - if ($file_cnt == 0) { - print STDERR "$P: file '${infile}' doesn't appear to be a patch. " - . "Add -f to options?\n"; - } - @files = sort_and_uniq(@files); } my @email_to = (); @@ -208,7 +209,7 @@ foreach my $file (@files) { } } - if ($email_git) { + if ($email && $email_git) { recent_git_signoffs($file); } @@ -240,30 +241,22 @@ if ($email) { } if ($scm) { - if (!$onefile) { - @scm = sort_and_uniq(@scm); - } + @scm = sort_and_uniq(@scm); output(@scm); } if ($status) { - if (!$onefile) { - @status = sort_and_uniq(@status); - } + @status = sort_and_uniq(@status); output(@status); } if ($subsystem) { - if (!$onefile) { - @subsystem = sort_and_uniq(@subsystem); - } + @subsystem = sort_and_uniq(@subsystem); output(@subsystem); } if ($web) { - if (!$onefile) { - @web = sort_and_uniq(@web); - } + @web = sort_and_uniq(@web); output(@web); } @@ -445,10 +438,12 @@ sub recent_git_signoffs { } $cmd = "git log --since=${email_git_since} -- ${file}"; - $cmd .= " | grep -P '^ [-A-Za-z]+by:.*\\\@'"; + $cmd .= " | grep -Pi \"^[-_ a-z]+by:.*\\\@\""; if (!$email_git_penguin_chiefs) { - $cmd .= " | grep -E -v \"${penguin_chiefs}\""; + $cmd .= " | grep -Pv \"${penguin_chiefs}\""; } + $cmd .= " | cut -f2- -d\":\""; + $cmd .= " | sed -e \"s/^\\s+//g\""; $cmd .= " | sort | uniq -c | sort -rn"; $output = `${cmd}`; @@ -456,9 +451,9 @@ sub recent_git_signoffs { @lines = split("\n", $output); foreach my $line (@lines) { - if ($line =~ m/([0-9]+)\s+([-A-Za-z]+by:)\s+(.*)/) { + if ($line =~ m/([0-9]+)\s+(.*)/) { my $sign_offs = $1; - $line = $3; + $line = $2; $count++; if ($sign_offs < $email_git_min_signatures || $count > $email_git_max_maintainers) { @@ -467,17 +462,19 @@ sub recent_git_signoffs { } else { die("$P: Unexpected git output: ${line}\n"); } - if ($line =~ m/(.*) <(.*)>/) { + if ($line =~ m/(.+)<(.+)>/) { my $git_name = $1; my $git_addr = $2; $git_name =~ tr/^\"//; + $git_name =~ tr/^\\s*//; $git_name =~ tr/\"$//; + $git_name =~ tr/\\s*$//; if ($email_usename) { push(@email_to, format_email($git_name, $git_addr)); } else { push(@email_to, $git_addr); } - } elsif ($line =~ m/<(.*)>/) { + } elsif ($line =~ m/<(.+)>/) { my $git_addr = $1; push(@email_to, $git_addr); } else { -- cgit v0.10.2 From 43fbc1eb7160dcb5202242c0c4a4d68cc5b93a5e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 10 Apr 2009 12:32:11 -0700 Subject: MAINTAINERS - Update frv arch patterns Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 42fd096..576702f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2285,7 +2285,6 @@ P: David Howells M: dhowells@redhat.com S: Maintained F: arch/frv/ -F: include/asm-frv/ FUJITSU LAPTOP EXTRAS P: Jonathan Woithe -- cgit v0.10.2 From be79b0928900ffb9567893546a8285054e772a71 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 10 Apr 2009 12:35:13 -0700 Subject: MAINTAINERS - Update MN10300 patterns Signed-off-by: Joe Perches diff --git a/MAINTAINERS b/MAINTAINERS index 576702f..ad3febb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4177,7 +4177,6 @@ W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/ S: Maintained F: Documentation/mn10300/ F: arch/mn10300/ -F: include/asm-mn10300/ PARALLEL PORT SUPPORT L: linux-parport@lists.infradead.org (subscribers-only) -- cgit v0.10.2 From 1bc571853381b81514cfc815b07a5cc2be4c86d2 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 10 Apr 2009 13:35:28 -0700 Subject: sh: urquell: Fix up address mapping in board comments. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index f217f35..beb88c4 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -23,26 +23,29 @@ #include #include -/* SWx 8765 4321 +/* + * bit 1234 5678 *---------------------------- - * SW1 1101 0010 -> Pck 66MHz version - * (0101 0010) Pck 33MHz version (check CS1BCR) - * SW2 xxxx x1x0 -> little endian + * SW1 0101 0010 -> Pck 33MHz version + * (1101 0010) Pck 66MHz version + * SW2 0x1x xxxx -> little endian * 29bit mode - * SW47 0001 1000 -> CS0 : nor flash + * SW47 0001 1000 -> CS0 : on-board flash * CS1 : SRAM, registers, LAN, PCMCIA - * 38400 bps + * 38400 bps for SCIF1 * * Address - * 0x00000000 Nor Flash - * 0x04000000 SRAM - * 0x05000000 FPGA register - * 0x05800000 LAN91C111 - * 0x06000000 PCMCIA - * 0x10000000 PCIe - * 0x14000000 LRAM/URAM - * 0x18000000 ATA/NAND-Flash - * 0x1C000000 SH7786 Control register + * 0x00000000 - 0x04000000 (CS0) Nor Flash + * 0x04000000 - 0x04200000 (CS1) SRAM + * 0x05000000 - 0x05800000 (CS1) on board register + * 0x05800000 - 0x06000000 (CS1) LAN91C111 + * 0x06000000 - 0x06400000 (CS1) PCMCIA + * 0x08000000 - 0x10000000 (CS2-CS3) DDR3 + * 0x10000000 - 0x14000000 (CS4) PCIe + * 0x14000000 - 0x14800000 (CS5) Core0 LRAM/URAM + * 0x14800000 - 0x15000000 (CS5) Core1 LRAM/URAM + * 0x18000000 - 0x1C000000 (CS6) ATA/NAND-Flash + * 0x1C000000 - (CS7) SH7786 Control register */ /* HeartBeat */ -- cgit v0.10.2 From 7933a3cfba017330ebb25f9820cb25ec9cdd67cc Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 10 Apr 2009 14:07:51 -0700 Subject: Remove stale include/asm-mn10300/.gitignore file Requested-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/include/asm-mn10300/.gitignore b/include/asm-mn10300/.gitignore deleted file mode 100644 index 0f87ba7..0000000 --- a/include/asm-mn10300/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -proc -unit -- cgit v0.10.2 From 3cc000b58360d8df402e31277c3dc0ebe34ad110 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 11 Apr 2009 08:39:27 +0900 Subject: sh: Plug in support for ARCH=sh64 using sh SRCARCH. This adds in support for building with ARCH=sh64 using the sh SRCARCH. This tidies up the randconfig generation somewhat to make sure that we don't end up with impossible configurations, and without having to rely on things like KCONFIG_ALLCONFIG to detect the proper CPU support subset. Signed-off-by: Paul Mundt diff --git a/Makefile b/Makefile index c6307b6..59b60d5 100644 --- a/Makefile +++ b/Makefile @@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh.*/sh/ ) + -e s/sh[234].*/sh/ ) # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- @@ -210,6 +210,11 @@ ifeq ($(ARCH),sparc64) SRCARCH := sparc endif +# Additional ARCH settings for sh +ifeq ($(ARCH),sh64) + SRCARCH := sh +endif + # Where to locate arch specific headers hdr-arch := $(SRCARCH) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 45f4a32..e7390dd 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -22,7 +22,7 @@ config SUPERH . config SUPERH32 - def_bool !SUPERH64 + def_bool ARCH = "sh" select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_FUNCTION_TRACER @@ -32,7 +32,7 @@ config SUPERH32 select ARCH_HIBERNATION_POSSIBLE if MMU config SUPERH64 - def_bool y if CPU_SH5 + def_bool ARCH = "sh64" config ARCH_DEFCONFIG string @@ -188,6 +188,8 @@ config ARCH_SHMOBILE bool select ARCH_SUSPEND_POSSIBLE +if SUPERH32 + choice prompt "Processor sub-type selection" @@ -409,6 +411,15 @@ config CPU_SUBTYPE_SH7366 select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_CMT +endchoice + +endif + +if SUPERH64 + +choice + prompt "Processor sub-type selection" + # SH-5 Processor Support config CPU_SUBTYPE_SH5_101 @@ -421,6 +432,8 @@ config CPU_SUBTYPE_SH5_103 endchoice +endif + source "arch/sh/mm/Kconfig" source "arch/sh/Kconfig.cpu" -- cgit v0.10.2 From 50a4da890102a455e5cd3dd358c38650d07178d3 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:38 +0000 Subject: ACPI: button: whitespace changes This patch changes a bit of whitespace to follow Linux conventions. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index d73c94b..52eb06e 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -1,5 +1,5 @@ /* - * acpi_button.c - ACPI Button Driver ($Revision: 30 $) + * button.c - ACPI Button Driver * * Copyright (C) 2001, 2002 Andy Grover * Copyright (C) 2001, 2002 Paul Diefenbaugh @@ -133,7 +133,6 @@ static int acpi_button_info_seq_show(struct seq_file *seq, void *offset) seq_printf(seq, "type: %s\n", acpi_device_name(button->device)); - return 0; } @@ -259,6 +258,7 @@ static int acpi_lid_send_state(struct acpi_button *button) &state); if (ACPI_FAILURE(status)) return -ENODEV; + /* input layer checks if event is redundant */ input_report_switch(button->input, SW_LID, !state); input_sync(button->input); @@ -299,13 +299,12 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) "Unsupported event [0x%x]\n", event)); break; } - - return; } static int acpi_button_resume(struct acpi_device *device) { struct acpi_button *button; + if (!device) return -EINVAL; button = acpi_driver_data(device); @@ -424,7 +423,6 @@ static int acpi_button_add(struct acpi_device *device) printk(KERN_INFO PREFIX "%s [%s]\n", acpi_device_name(device), acpi_device_bid(device)); - return 0; err_remove_fs: @@ -448,7 +446,6 @@ static int acpi_button_remove(struct acpi_device *device, int type) acpi_button_remove_fs(device); input_unregister_device(button->input); kfree(button); - return 0; } @@ -459,6 +456,7 @@ static int __init acpi_button_init(void) acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir); if (!acpi_button_dir) return -ENODEV; + result = acpi_bus_register_driver(&acpi_button_driver); if (result < 0) { remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir); -- cgit v0.10.2 From e2fb9754d27513918a4936e8cbaad50ff56cfd3d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:43 +0000 Subject: ACPI: button: remove unnecessary null pointer checks Better to oops and learn about a bug than to silently cover it up. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 52eb06e..c463236 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -128,9 +128,6 @@ static int acpi_button_info_seq_show(struct seq_file *seq, void *offset) { struct acpi_button *button = seq->private; - if (!button || !button->device) - return 0; - seq_printf(seq, "type: %s\n", acpi_device_name(button->device)); return 0; @@ -147,9 +144,6 @@ static int acpi_button_state_seq_show(struct seq_file *seq, void *offset) acpi_status status; unsigned long long state; - if (!button || !button->device) - return 0; - status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state); seq_printf(seq, "state: %s\n", ACPI_FAILURE(status) ? "unsupported" : @@ -171,9 +165,6 @@ static int acpi_button_add_fs(struct acpi_device *device) struct proc_dir_entry *entry = NULL; struct acpi_button *button; - if (!device || !acpi_driver_data(device)) - return -EINVAL; - button = acpi_driver_data(device); switch (button->type) { @@ -270,9 +261,6 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) struct acpi_button *button = acpi_driver_data(device); struct input_dev *input; - if (!button || !button->device) - return; - switch (event) { case ACPI_FIXED_HARDWARE_EVENT: event = ACPI_BUTTON_NOTIFY_STATUS; @@ -305,10 +293,8 @@ static int acpi_button_resume(struct acpi_device *device) { struct acpi_button *button; - if (!device) - return -EINVAL; button = acpi_driver_data(device); - if (button && button->type == ACPI_BUTTON_TYPE_LID) + if (button->type == ACPI_BUTTON_TYPE_LID) return acpi_lid_send_state(button); return 0; } @@ -319,9 +305,6 @@ static int acpi_button_add(struct acpi_device *device) struct acpi_button *button; struct input_dev *input; - if (!device) - return -EINVAL; - button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL); if (!button) return -ENOMEM; @@ -438,9 +421,6 @@ static int acpi_button_remove(struct acpi_device *device, int type) { struct acpi_button *button; - if (!device || !acpi_driver_data(device)) - return -EINVAL; - button = acpi_driver_data(device); acpi_button_remove_fs(device); -- cgit v0.10.2 From 1bce81131c71064bc3163078f24545b839a31967 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:49 +0000 Subject: ACPI: button: use Linux style for getting driver_data It's typical and slightly more compact to look up the driver_data structure by initializing the automatic variable at its definition. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index c463236..8ef8f443 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -162,10 +162,8 @@ static struct proc_dir_entry *acpi_lid_dir; static int acpi_button_add_fs(struct acpi_device *device) { + struct acpi_button *button = acpi_driver_data(device); struct proc_dir_entry *entry = NULL; - struct acpi_button *button; - - button = acpi_driver_data(device); switch (button->type) { case ACPI_BUTTON_TYPE_POWER: @@ -291,9 +289,8 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) static int acpi_button_resume(struct acpi_device *device) { - struct acpi_button *button; + struct acpi_button *button = acpi_driver_data(device); - button = acpi_driver_data(device); if (button->type == ACPI_BUTTON_TYPE_LID) return acpi_lid_send_state(button); return 0; @@ -301,9 +298,9 @@ static int acpi_button_resume(struct acpi_device *device) static int acpi_button_add(struct acpi_device *device) { - int error; struct acpi_button *button; struct input_dev *input; + int error; button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL); if (!button) @@ -419,9 +416,7 @@ static int acpi_button_add(struct acpi_device *device) static int acpi_button_remove(struct acpi_device *device, int type) { - struct acpi_button *button; - - button = acpi_driver_data(device); + struct acpi_button *button = acpi_driver_data(device); acpi_button_remove_fs(device); input_unregister_device(button->input); -- cgit v0.10.2 From bf04a77227db76f163bc2355ef4e176794987be2 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:54 +0000 Subject: ACPI: button: cache hid/name/class pointers This patch adds temporaries to cache the acpi_device_hid(), acpi_device_name(), and acpi_device_class() pointers so we don't have to clutter the code with so many uses of those interfaces. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 8ef8f443..9f6d2e6 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -300,6 +300,7 @@ static int acpi_button_add(struct acpi_device *device) { struct acpi_button *button; struct input_dev *input; + char *hid, *name, *class; int error; button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL); @@ -315,40 +316,41 @@ static int acpi_button_add(struct acpi_device *device) goto err_free_button; } + hid = acpi_device_hid(device); + name = acpi_device_name(device); + class = acpi_device_class(device); + /* * Determine the button type (via hid), as fixed-feature buttons * need to be handled a bit differently than generic-space. */ - if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) { + if (!strcmp(hid, ACPI_BUTTON_HID_POWER)) { button->type = ACPI_BUTTON_TYPE_POWER; - strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_POWER); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER); - } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_POWERF)) { button->type = ACPI_BUTTON_TYPE_POWERF; - strcpy(acpi_device_name(device), - ACPI_BUTTON_DEVICE_NAME_POWERF); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWERF); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER); - } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEP)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP)) { button->type = ACPI_BUTTON_TYPE_SLEEP; - strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_SLEEP); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP); - } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) { button->type = ACPI_BUTTON_TYPE_SLEEPF; - strcpy(acpi_device_name(device), - ACPI_BUTTON_DEVICE_NAME_SLEEPF); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEPF); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP); - } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_LID)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) { button->type = ACPI_BUTTON_TYPE_LID; - strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_LID); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID); } else { - printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", - acpi_device_hid(device)); + printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid); error = -ENODEV; goto err_free_input; } @@ -357,10 +359,9 @@ static int acpi_button_add(struct acpi_device *device) if (error) goto err_free_input; - snprintf(button->phys, sizeof(button->phys), - "%s/button/input0", acpi_device_hid(device)); + snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid); - input->name = acpi_device_name(device); + input->name = name; input->phys = button->phys; input->id.bustype = BUS_HOST; input->id.product = button->type; @@ -401,8 +402,7 @@ static int acpi_button_add(struct acpi_device *device) device->wakeup.state.enabled = 1; } - printk(KERN_INFO PREFIX "%s [%s]\n", - acpi_device_name(device), acpi_device_bid(device)); + printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device)); return 0; err_remove_fs: -- cgit v0.10.2 From 106c19e7b978e1b84ea5cabbd470a0ddced577c8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:59 +0000 Subject: ACPI: button: remove button->device pointer We no longer need a pointer from struct acpi_button back to the struct acpi_device. Everywhere we used that pointer, we either already have, or can easily get, the acpi_device pointer without using the copy from acpi_button. So this patch removes the structure element. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 9f6d2e6..c844162 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -95,7 +95,6 @@ static struct acpi_driver acpi_button_driver = { }; struct acpi_button { - struct acpi_device *device; /* Fixed button kludge */ unsigned int type; struct input_dev *input; char phys[32]; /* for input device */ @@ -126,10 +125,10 @@ static struct proc_dir_entry *acpi_button_dir; static int acpi_button_info_seq_show(struct seq_file *seq, void *offset) { - struct acpi_button *button = seq->private; + struct acpi_device *device = seq->private; seq_printf(seq, "type: %s\n", - acpi_device_name(button->device)); + acpi_device_name(device)); return 0; } @@ -140,11 +139,11 @@ static int acpi_button_info_open_fs(struct inode *inode, struct file *file) static int acpi_button_state_seq_show(struct seq_file *seq, void *offset) { - struct acpi_button *button = seq->private; + struct acpi_device *device = seq->private; acpi_status status; unsigned long long state; - status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state); + status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state); seq_printf(seq, "state: %s\n", ACPI_FAILURE(status) ? "unsupported" : (state ? "open" : "closed")); @@ -198,8 +197,7 @@ static int acpi_button_add_fs(struct acpi_device *device) /* 'info' [R] */ entry = proc_create_data(ACPI_BUTTON_FILE_INFO, S_IRUGO, acpi_device_dir(device), - &acpi_button_info_fops, - acpi_driver_data(device)); + &acpi_button_info_fops, device); if (!entry) return -ENODEV; @@ -207,8 +205,7 @@ static int acpi_button_add_fs(struct acpi_device *device) if (button->type == ACPI_BUTTON_TYPE_LID) { entry = proc_create_data(ACPI_BUTTON_FILE_STATE, S_IRUGO, acpi_device_dir(device), - &acpi_button_state_fops, - acpi_driver_data(device)); + &acpi_button_state_fops, device); if (!entry) return -ENODEV; } @@ -238,13 +235,13 @@ static int acpi_button_remove_fs(struct acpi_device *device) /* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ -static int acpi_lid_send_state(struct acpi_button *button) +static int acpi_lid_send_state(struct acpi_device *device) { + struct acpi_button *button = acpi_driver_data(device); unsigned long long state; acpi_status status; - status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, - &state); + status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state); if (ACPI_FAILURE(status)) return -ENODEV; @@ -266,7 +263,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) case ACPI_BUTTON_NOTIFY_STATUS: input = button->input; if (button->type == ACPI_BUTTON_TYPE_LID) { - acpi_lid_send_state(button); + acpi_lid_send_state(device); } else { int keycode = test_bit(KEY_SLEEP, input->keybit) ? KEY_SLEEP : KEY_POWER; @@ -277,8 +274,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) input_sync(input); } - acpi_bus_generate_proc_event(button->device, event, - ++button->pushed); + acpi_bus_generate_proc_event(device, event, ++button->pushed); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, @@ -292,7 +288,7 @@ static int acpi_button_resume(struct acpi_device *device) struct acpi_button *button = acpi_driver_data(device); if (button->type == ACPI_BUTTON_TYPE_LID) - return acpi_lid_send_state(button); + return acpi_lid_send_state(device); return 0; } @@ -307,7 +303,6 @@ static int acpi_button_add(struct acpi_device *device) if (!button) return -ENOMEM; - button->device = device; device->driver_data = button; button->input = input = input_allocate_device(); @@ -390,7 +385,7 @@ static int acpi_button_add(struct acpi_device *device) if (error) goto err_remove_fs; if (button->type == ACPI_BUTTON_TYPE_LID) - acpi_lid_send_state(button); + acpi_lid_send_state(device); if (device->wakeup.flags.valid) { /* Button's GPE is run-wake GPE */ -- cgit v0.10.2 From d68b597c883cf863c7216564cae08a4730d56cc1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:40:04 +0000 Subject: ACPI: button: remove control method/fixed hardware distinctions This patch removes the driver distinction between control method (CM) and fixed hardware (FF) buttons. We previously needed that so we could install either a fixed event handler or a notify handler, but the Linux/ACPI code now handles that for us, so we don't need to worry about it. Note that this removes the FF/CM annotation from the "info" files in /proc. For example, /proc/acpi/button/PWRF/info: -type: Power Button (FF) +type: Power Button I don't think there's anything meaningful user-space can do by knowing whether a button is a control method or a fixed hardware button, so nobody should be looking at the FF/CM. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index c844162..9195deb 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -41,17 +41,13 @@ #define ACPI_BUTTON_SUBCLASS_POWER "power" #define ACPI_BUTTON_HID_POWER "PNP0C0C" -#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button (CM)" -#define ACPI_BUTTON_DEVICE_NAME_POWERF "Power Button (FF)" +#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button" #define ACPI_BUTTON_TYPE_POWER 0x01 -#define ACPI_BUTTON_TYPE_POWERF 0x02 #define ACPI_BUTTON_SUBCLASS_SLEEP "sleep" #define ACPI_BUTTON_HID_SLEEP "PNP0C0E" -#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button (CM)" -#define ACPI_BUTTON_DEVICE_NAME_SLEEPF "Sleep Button (FF)" +#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button" #define ACPI_BUTTON_TYPE_SLEEP 0x03 -#define ACPI_BUTTON_TYPE_SLEEPF 0x04 #define ACPI_BUTTON_SUBCLASS_LID "lid" #define ACPI_BUTTON_HID_LID "PNP0C0D" @@ -166,14 +162,12 @@ static int acpi_button_add_fs(struct acpi_device *device) switch (button->type) { case ACPI_BUTTON_TYPE_POWER: - case ACPI_BUTTON_TYPE_POWERF: if (!acpi_power_dir) acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER, acpi_button_dir); entry = acpi_power_dir; break; case ACPI_BUTTON_TYPE_SLEEP: - case ACPI_BUTTON_TYPE_SLEEPF: if (!acpi_sleep_dir) acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP, acpi_button_dir); @@ -315,30 +309,18 @@ static int acpi_button_add(struct acpi_device *device) name = acpi_device_name(device); class = acpi_device_class(device); - /* - * Determine the button type (via hid), as fixed-feature buttons - * need to be handled a bit differently than generic-space. - */ - if (!strcmp(hid, ACPI_BUTTON_HID_POWER)) { + if (!strcmp(hid, ACPI_BUTTON_HID_POWER) || + !strcmp(hid, ACPI_BUTTON_HID_POWERF)) { button->type = ACPI_BUTTON_TYPE_POWER; strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER); sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER); - } else if (!strcmp(hid, ACPI_BUTTON_HID_POWERF)) { - button->type = ACPI_BUTTON_TYPE_POWERF; - strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWERF); - sprintf(class, "%s/%s", - ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER); - } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP) || + !strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) { button->type = ACPI_BUTTON_TYPE_SLEEP; strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP); sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP); - } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) { - button->type = ACPI_BUTTON_TYPE_SLEEPF; - strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEPF); - sprintf(class, "%s/%s", - ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP); } else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) { button->type = ACPI_BUTTON_TYPE_LID; strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID); @@ -364,13 +346,11 @@ static int acpi_button_add(struct acpi_device *device) switch (button->type) { case ACPI_BUTTON_TYPE_POWER: - case ACPI_BUTTON_TYPE_POWERF: input->evbit[0] = BIT_MASK(EV_KEY); set_bit(KEY_POWER, input->keybit); break; case ACPI_BUTTON_TYPE_SLEEP: - case ACPI_BUTTON_TYPE_SLEEPF: input->evbit[0] = BIT_MASK(EV_KEY); set_bit(KEY_SLEEP, input->keybit); break; -- cgit v0.10.2 From 82babbb3887e234c995626e4121d411ea9070ca5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 8 Apr 2009 09:44:29 +0800 Subject: ACPI: Revert conflicting workaround for BIOS w/ mangled PRT entries 2f894ef9c8b36a35d80709bedca276d2fc691941 in Linux-2.6.21 worked around BIOS with mangled _PRT entries: http://bugzilla.kernel.org/show_bug.cgi?id=6859 d0e184abc5983281ef189db2c759d65d56eb1b80 worked around the same issue via ACPICA, and shipped in 2.6.27. Unfortunately the two workarounds conflict: http://bugzilla.kernel.org/show_bug.cgi?id=12270 So revert the Linux specific one. Signed-off-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index 663f692..a3c23d6 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -191,8 +191,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer); for (index = 0; index < number_of_elements; index++) { - int source_name_index = 2; - int source_index_index = 3; /* * Point user_prt past this current structure @@ -261,27 +259,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, return_ACPI_STATUS(AE_BAD_DATA); } - /* - * If BIOS erroneously reversed the _PRT source_name and source_index, - * then reverse them back. - */ - if ((sub_object_list[3])->common.type != - ACPI_TYPE_INTEGER) { - if (acpi_gbl_enable_interpreter_slack) { - source_name_index = 3; - source_index_index = 2; - printk(KERN_WARNING - "ACPI: Handling Garbled _PRT entry\n"); - } else { - ACPI_ERROR((AE_INFO, - "(PRT[%X].source_index) Need Integer, found %s", - index, - acpi_ut_get_object_type_name - (sub_object_list[3]))); - return_ACPI_STATUS(AE_BAD_DATA); - } - } - user_prt->pin = (u32) obj_desc->integer.value; /* @@ -304,7 +281,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, * 3) Third subobject: Dereference the PRT.source_name * The name may be unresolved (slack mode), so allow a null object */ - obj_desc = sub_object_list[source_name_index]; + obj_desc = sub_object_list[2]; if (obj_desc) { switch (obj_desc->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: @@ -378,7 +355,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, /* 4) Fourth subobject: Dereference the PRT.source_index */ - obj_desc = sub_object_list[source_index_index]; + obj_desc = sub_object_list[3]; if (obj_desc->common.type != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "(PRT[%X].SourceIndex) Need Integer, found %s", -- cgit v0.10.2 From e047cca66c6bb0b1c346e91305011aab79dfc4b0 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 9 Apr 2009 14:24:35 +0800 Subject: ACPI video: handle indexed _BQC correctly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the current code, for a box with an indexed _BQC method, we 1. get the current brightness level by evaluating _BQC 2. set the value gotten in step 1 to _BCM 3. get the current brightness level again 4. set the _BQC_use_index flag if the results gotten in step 1 and in step 3 don't equal. But this logic doesn't work actually, because the _BQC_use_index is not set when acpi_video_device_lcd_set_level is invoked. This results in a failure in step 2. http://bugzilla.kernel.org/show_bug.cgi?id=12249#c83 Now, we set the _BQC_use_index flag after invoking _BQC for the first time. And reevaluate the _BQC to get the correct brightness level. Signed-off-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index cd4fb75..346277f 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -807,12 +807,19 @@ acpi_video_init_brightness(struct acpi_video_device *device) br->flags._BCM_use_index = br->flags._BCL_use_index; /* _BQC uses INDEX while _BCL uses VALUE in some laptops */ - br->curr = max_level; + br->curr = level_old = max_level; + + if (!device->cap._BQC) + goto set_level; + result = acpi_video_device_lcd_get_level_current(device, &level_old); if (result) goto out_free_levels; - result = acpi_video_device_lcd_set_level(device, br->curr); + /* + * Set the level to maximum and check if _BQC uses indexed value + */ + result = acpi_video_device_lcd_set_level(device, max_level); if (result) goto out_free_levels; @@ -820,25 +827,19 @@ acpi_video_init_brightness(struct acpi_video_device *device) if (result) goto out_free_levels; - if ((level != level_old) && !br->flags._BCM_use_index) { - /* Note: - * This piece of code does not work correctly if the current - * brightness levels is 0. - * But I guess boxes that boot with such a dark screen are rare - * and no more code is needed to cover this specifial case. - */ - - if (level_ac_battery != 2) { - /* - * For now, we don't support the _BCL like this: - * 16, 15, 0, 1, 2, 3, ..., 14, 15, 16 - * because we may mess up the index returned by _BQC. - * Plus: we have not got a box like this. - */ - ACPI_ERROR((AE_INFO, "_BCL not supported\n")); - } - br->flags._BQC_use_index = 1; - } + br->flags._BQC_use_index = (level == max_level ? 0 : 1); + + if (!br->flags._BQC_use_index) + goto set_level; + + if (br->flags._BCL_reversed) + level_old = (br->count - 1) - level_old; + level_old = br->levels[level_old]; + +set_level: + result = acpi_video_device_lcd_set_level(device, level_old); + if (result) + goto out_free_levels; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "found %d brightness levels\n", count - 2)); -- cgit v0.10.2 From e523b38e2f568af58baa13120a994cbf24e6dee0 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 10 Apr 2009 22:27:48 -0700 Subject: intel-iommu: Avoid panic() for DRHD at address zero. If the BIOS does something obviously stupid, like claiming that the registers for the IOMMU are at physical address zero, then print a nasty message and abort, rather than trying to set up the IOMMU and then later panicking. It's becoming more and more obvious that trusting this stuff to the BIOS was a mistake. Signed-off-by: David Woodhouse diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 25a00ce..fa3a113 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -173,12 +173,21 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header) struct dmar_drhd_unit *dmaru; int ret = 0; + drhd = (struct acpi_dmar_hardware_unit *)header; + if (!drhd->address) { + /* Promote an attitude of violence to a BIOS engineer today */ + WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n" + "BIOS vendor: %s; Ver: %s; Product Version: %s\n", + dmi_get_system_info(DMI_BIOS_VENDOR), + dmi_get_system_info(DMI_BIOS_VERSION), + dmi_get_system_info(DMI_PRODUCT_VERSION)); + return -ENODEV; + } dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL); if (!dmaru) return -ENOMEM; dmaru->hdr = header; - drhd = (struct acpi_dmar_hardware_unit *)header; dmaru->reg_base_addr = drhd->address; dmaru->segment = drhd->segment; dmaru->include_all = drhd->flags & 0x1; /* BIT0: INCLUDE_ALL */ -- cgit v0.10.2 From 79ff807cf23ffb527f3f35bdececf56cabcdee07 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sun, 29 Mar 2009 15:01:47 +0200 Subject: kbuild: fix option processing for -I in headerdep MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit -I takes an argument. Without this change only a 1 is added to @opt_include which is not helpful. Signed-off-by: Uwe Kleine-König Acked-by: Vegard Nossum Signed-off-by: Sam Ravnborg diff --git a/scripts/headerdep.pl b/scripts/headerdep.pl index 97399da..b7f6c56 100755 --- a/scripts/headerdep.pl +++ b/scripts/headerdep.pl @@ -19,7 +19,7 @@ my $opt_graph; version => \&version, all => \$opt_all, - I => \@opt_include, + "I=s" => \@opt_include, graph => \$opt_graph, ); -- cgit v0.10.2 From 612c280ef2400c70ea2fd8f2e17549c95002368c Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Wed, 8 Apr 2009 08:42:48 +0200 Subject: kconfig: fix update-po-config to accect backslash in input Massimo Maiurana reported (slightly edited): ===== In latest 2.6.29 "make update-po-config" fails at msguniq invocation with an "invalid control sequence" error. The offending string is the following, and it's located in drivers/staging/panel/Kconfig:72: "'\e[L' which are specific to the LCD, and a few ANSI codes. The" looks to me like gettext expects strings in printf format, so in this case it thinks "\e" is a control sequence but doesn't recognise it as a valid one. A valid solution would be to tell kxgettext to automatically escape this kind of strings in the */config.pot he produces, so that msguniq would not complain. ===== This patch implements the suggested escaping. Reported-by: Massimo Maiurana Tested-by: Massimo Maiurana Signed-off-by: Sam Ravnborg diff --git a/scripts/kconfig/kxgettext.c b/scripts/kconfig/kxgettext.c index 6eb72a7..8d9ce22 100644 --- a/scripts/kconfig/kxgettext.c +++ b/scripts/kconfig/kxgettext.c @@ -43,6 +43,10 @@ static char *escape(const char* text, char *bf, int len) ++text; goto next; } + else if (*text == '\\') { + *bfp++ = '\\'; + len--; + } *bfp++ = *text++; next: --len; -- cgit v0.10.2 From 4774bb1ced60a94d83b28e5a42d4cf01b83d9b60 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 26 Mar 2009 21:58:04 +0100 Subject: kbuild: use git svn instead of git-svn in setlocalversion Use the correct git syntax instead of the deprecated git-. Signed-off-by: Peter Korsgaard Signed-off-by: Sam Ravnborg diff --git a/scripts/setlocalversion b/scripts/setlocalversion index f1c4b35..47e75b6 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -21,7 +21,7 @@ if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then # Is this git on svn? if git config --get svn-remote.svn.url >/dev/null; then - printf -- '-svn%s' "`git-svn find-rev $head`" + printf -- '-svn%s' "`git svn find-rev $head`" fi # Are there uncommitted changes? -- cgit v0.10.2 From c7bb349e7c25df1ae1bbb72675b9bb02e1d9c464 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 10 Apr 2009 08:52:43 +0200 Subject: kbuild: introduce destination-y for exported headers xtensa and arm have asked for a possibility to export headers and locate them in a specific directory when exported. Introduce destiantion-y to support this. This patch in additiona adds some limited documentation for the variables used for exported headers. Signed-off-by: Sam Ravnborg Cc: Oskar Schirmer Cc: Mikael Starvik diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 51104f9..d4b0567 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -40,10 +40,16 @@ This document describes the Linux kernel Makefiles. --- 6.7 Custom kbuild commands --- 6.8 Preprocessing linker scripts - === 7 Kbuild Variables - === 8 Makefile language - === 9 Credits - === 10 TODO + === 7 Kbuild syntax for exported headers + --- 7.1 header-y + --- 7.2 objhdr-y + --- 7.3 destination-y + --- 7.4 unifdef-y (deprecated) + + === 8 Kbuild Variables + === 9 Makefile language + === 10 Credits + === 11 TODO === 1 Overview @@ -1143,8 +1149,69 @@ When kbuild executes, the following steps are followed (roughly): The kbuild infrastructure for *lds file are used in several architecture-specific files. +=== 7 Kbuild syntax for exported headers + +The kernel include a set of headers that is exported to userspace. +Many headers can be exported as-is but other headers requires a +minimal pre-processing before they are ready for user-space. +The pre-processing does: +- drop kernel specific annotations +- drop include of compiler.h +- drop all sections that is kernel internat (guarded by ifdef __KERNEL__) + +Each relevant directory contain a file name "Kbuild" which specify the +headers to be exported. +See subsequent chapter for the syntax of the Kbuild file. + + --- 7.1 header-y + + header-y specify header files to be exported. + + Example: + #include/linux/Kbuild + header-y += usb/ + header-y += aio_abi.h + + The convention is to list one file per line and + preferably in alphabetic order. + + header-y also specify which subdirectories to visit. + A subdirectory is identified by a trailing '/' which + can be seen in the example above for the usb subdirectory. + + Subdirectories are visited before their parent directories. + + --- 7.2 objhdr-y + + objhdr-y specifies generated files to be exported. + Generated files are special as they need to be looked + up in another directory when doing 'make O=...' builds. + + Example: + #include/linux/Kbuild + objhdr-y += version.h + + --- 7.3 destination-y + + When an architecture have a set of exported headers that needs to be + exported to a different directory destination-y is used. + destination-y specify the destination directory for all exported + headers in the file where it is present. + + Example: + #arch/xtensa/platforms/s6105/include/platform/Kbuild + destination-y := include/linux + + In the example above all exported headers in the Kbuild file + will be located in the directory "include/linux" when exported. + + + --- 7.4 unifdef-y (deprecated) + + unifdef-y is deprecated. A direct replacement is header-y. + -=== 7 Kbuild Variables +=== 8 Kbuild Variables The top Makefile exports the following variables: @@ -1206,7 +1273,7 @@ The top Makefile exports the following variables: INSTALL_MOD_STRIP will used as the option(s) to the strip command. -=== 8 Makefile language +=== 9 Makefile language The kernel Makefiles are designed to be run with GNU Make. The Makefiles use only the documented features of GNU Make, but they do use many @@ -1225,14 +1292,14 @@ time the left-hand side is used. There are some cases where "=" is appropriate. Usually, though, ":=" is the right choice. -=== 9 Credits +=== 10 Credits Original version made by Michael Elizabeth Chastain, Updates by Kai Germaschewski Updates by Sam Ravnborg Language QA by Jan Engelhardt -=== 10 TODO +=== 11 TODO - Describe how kbuild supports shipped files with _shipped. - Generating offset header files. diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index 612dc13..095cfc8 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -14,6 +14,8 @@ _dst := $(if $(dst),$(dst),$(obj)) kbuild-file := $(srctree)/$(obj)/Kbuild include $(kbuild-file) +_dst := $(if $(destination-y),$(destination-y),$(_dst)) + include scripts/Kbuild.include install := $(INSTALL_HDR_PATH)/$(_dst) -- cgit v0.10.2 From fe8d0a41081d6d0912386f3672ccc0bf1d675630 Mon Sep 17 00:00:00 2001 From: Kirill Smelkov Date: Thu, 9 Apr 2009 15:34:34 +0400 Subject: kbuild: fix a few typos in top-level Makefile Signed-off-by: Kirill Smelkov Acked-by: Dmitry Gryazin Signed-off-by: Sam Ravnborg diff --git a/Makefile b/Makefile index e5ad5fd..3e95d45 100644 --- a/Makefile +++ b/Makefile @@ -567,7 +567,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) # disable pointer signed / unsigned warnings in gcc 4.0 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,) -# disable invalid "can't wrap" optimzations for signed / pointers +# disable invalid "can't wrap" optimizations for signed / pointers KBUILD_CFLAGS += $(call cc-option,-fwrapv) # revert to pre-gcc-4.4 behaviour of .eh_frame @@ -1587,5 +1587,5 @@ PHONY += FORCE FORCE: # Declare the contents of the .PHONY variable as phony. We keep that -# information in a variable se we can use it in if_changed and friends. +# information in a variable so we can use it in if_changed and friends. .PHONY: $(PHONY) -- cgit v0.10.2 From 0fa3a88cfdfc910d7f335aef588edf9819c05d54 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 12:28:30 +0000 Subject: kbuild: remove pointless strdup() on arguments passed to new_module() in modpost new_module() itself already calls strdup() on its modname parameter. Signed-off-by: Jan Beulich Signed-off-by: Sam Ravnborg diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 8cc7061..df6e628 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1913,7 +1913,7 @@ static void read_dump(const char *fname, unsigned int kernel) if (!mod) { if (is_vmlinux(modname)) have_vmlinux = 1; - mod = new_module(NOFAIL(strdup(modname))); + mod = new_module(modname); mod->skip = 1; } s = sym_add_exported(symname, mod, export_no(export)); @@ -1997,7 +1997,7 @@ static void read_markers(const char *fname) mod = find_module(modname); if (!mod) { - mod = new_module(NOFAIL(strdup(modname))); + mod = new_module(modname); mod->skip = 1; } if (is_vmlinux(modname)) { -- cgit v0.10.2 From 5d7d18f5bc507b60d3d8967e2739d5e6ffdd630f Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 4 Mar 2009 11:59:07 -0800 Subject: kbuild: make it possible for the linker to discard local symbols from vmlinux Make it possible for the linker to discard local symbols from vmlinux as they cause vmlinux to balloon when CONFIG_KALLSYMS=y and they cause dump_stack() and get_wchan() to produce useless information under some circumstances. With this we add a config option (CONFIG_STRIP_ASM_SYMS) that will cause the build to supply -X to the linker to tell it to strip temporary local symbols. This doesn't seem to cause gdb any problems. Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg diff --git a/Makefile b/Makefile index 3e95d45..ad830bd 100644 --- a/Makefile +++ b/Makefile @@ -597,6 +597,10 @@ LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\ LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID) LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID) +ifeq ($(CONFIG_STRIP_ASM_SYMS),y) +LDFLAGS_vmlinux += -X +endif + # Default kernel image to build when no specific target is given. # KBUILD_IMAGE may be overruled on the command line or # set in the environment diff --git a/init/Kconfig b/init/Kconfig index f2f9b53..7be4d38 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -808,6 +808,14 @@ config KALLSYMS_EXTRA_PASS you wait for kallsyms to be fixed. +config STRIP_ASM_SYMS + bool "Strip assembler-generated symbols during link" + default n + help + Strip internal assembler-generated symbols during a link (symbols + that look like '.Lxxx') so they don't pollute the output of + get_wchan() and suchlike. + config HOTPLUG bool "Support for hot-pluggable devices" if EMBEDDED default y -- cgit v0.10.2 From 20375bf82567b5fecd331048c6cc1fc292b67710 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 10 Apr 2009 13:18:08 +0200 Subject: Documentation: explain the difference between __bitwise and __bitwise__ Simply added explanation from Al Viro in the following mail: http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/3164.html Cc: Al Viro Cc: Randy Dunlap Signed-off-by: Sam Ravnborg diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt index 42f43fa..34c76a5 100644 --- a/Documentation/sparse.txt +++ b/Documentation/sparse.txt @@ -42,6 +42,14 @@ sure that bitwise types don't get mixed up (little-endian vs big-endian vs cpu-endian vs whatever), and there the constant "0" really _is_ special. +__bitwise__ - to be used for relatively compact stuff (gfp_t, etc.) that +is mostly warning-free and is supposed to stay that way. Warnings will +be generated without __CHECK_ENDIAN__. + +__bitwise - noisy stuff; in particular, __le*/__be* are that. We really +don't want to drown in noise unless we'd explicitly asked for it. + + Getting sparse ~~~~~~~~~~~~~~ -- cgit v0.10.2 From 9e5ec8615209f6a5bf2a612120d972b6021790da Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Mon, 9 Feb 2009 18:49:52 +0100 Subject: kbuild: fix spurious initramfs rebuild When gen_initramfs_list is used to generate make dependencies, it includes symbolic links, for which make tracks the link target. Any change to that target will cause an initramfs rebuild, even if the symlink points to something outside of the initramfs directory. If the target happens to be /tmp, the rebuild occurs for each kernel build, since gen_initramfs_list uses mktemp... Proposed way to fix it is to omit symbolic links from generated dependencies, but this has a small drawback: changing perm/owner on a symlink will go unnoticed. Signed-off-by: Maxime Bizon Signed-off-by: Sam Ravnborg diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh index 3eea8f1..76af5f9 100644 --- a/scripts/gen_initramfs_list.sh +++ b/scripts/gen_initramfs_list.sh @@ -97,7 +97,7 @@ print_mtime() { } list_parse() { - echo "$1 \\" + [ ! -L "$1" ] && echo "$1 \\" || : } # for each file print a line in following format -- cgit v0.10.2 From 2810ae8c73cbfb37891aa99dfbca46ffd40dbc91 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 10 Apr 2009 14:20:54 -0700 Subject: docbook: make cleandocs Add a 'make cleandocs' target to clean up all generated DocBook files. Signed-off-by: Randy Dunlap Signed-off-by: Sam Ravnborg diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index a3a83d3..8918a32 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -31,7 +31,7 @@ PS_METHOD = $(prefer-db2x) ### # The targets that may be used. -PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs +PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs BOOKS := $(addprefix $(obj)/,$(DOCBOOKS)) xmldocs: $(BOOKS) @@ -213,11 +213,12 @@ silent_gen_xml = : dochelp: @echo ' Linux kernel internal documentation in different formats:' @echo ' htmldocs - HTML' - @echo ' installmandocs - install man pages generated by mandocs' - @echo ' mandocs - man pages' @echo ' pdfdocs - PDF' @echo ' psdocs - Postscript' @echo ' xmldocs - XML DocBook' + @echo ' mandocs - man pages' + @echo ' installmandocs - install man pages generated by mandocs' + @echo ' cleandocs - clean all generated DocBook files' ### # Temporary files left by various tools @@ -235,6 +236,10 @@ clean-files := $(DOCBOOKS) \ clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man +cleandocs: + $(Q)rm -f $(call objectify, $(clean-files)) + $(Q)rm -rf $(call objectify, $(clean-dirs)) + # Declare the contents of the .PHONY variable as phony. We keep that # information in a variable se we can use it in if_changed and friends. -- cgit v0.10.2 From d543103a0c75edc0a7a08dfd796de67466a15dfb Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 8 Apr 2009 13:15:22 +0000 Subject: net: netif_device_attach/detach should start/stop all queues Currently netif_device_attach/detach are only stopping one queue. They should be starting and stopping all the queues on a given device. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 91d792d..ea8eb22 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1430,7 +1430,7 @@ void netif_device_detach(struct net_device *dev) { if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) && netif_running(dev)) { - netif_stop_queue(dev); + netif_tx_stop_all_queues(dev); } } EXPORT_SYMBOL(netif_device_detach); @@ -1445,7 +1445,7 @@ void netif_device_attach(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) && netif_running(dev)) { - netif_wake_queue(dev); + netif_tx_wake_all_queues(dev); __netdev_watchdog_up(dev); } } -- cgit v0.10.2 From 87c1201708381c2791caa78a2caf217778633277 Mon Sep 17 00:00:00 2001 From: PJ Waskiewicz Date: Wed, 8 Apr 2009 13:20:31 +0000 Subject: ixgbe: Move the LED blink code to common, since 82599 also uses it The LED blink code is common for 82599 as well. It should be moved to ixgbe_common.c so both devices can use it, and not have it duplicated. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index de4db0d..4791238 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -885,61 +885,6 @@ static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) } /** - * ixgbe_blink_led_start_82598 - Blink LED based on index. - * @hw: pointer to hardware structure - * @index: led number to blink - **/ -static s32 ixgbe_blink_led_start_82598(struct ixgbe_hw *hw, u32 index) -{ - ixgbe_link_speed speed = 0; - bool link_up = 0; - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - /* - * Link must be up to auto-blink the LEDs on the 82598EB MAC; - * force it if link is down. - */ - hw->mac.ops.check_link(hw, &speed, &link_up, false); - - if (!link_up) { - autoc_reg |= IXGBE_AUTOC_FLU; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - msleep(10); - } - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_blink_led_stop_82598 - Stop blinking LED based on index. - * @hw: pointer to hardware structure - * @index: led number to stop blinking - **/ -static s32 ixgbe_blink_led_stop_82598(struct ixgbe_hw *hw, u32 index) -{ - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - autoc_reg &= ~IXGBE_AUTOC_FLU; - autoc_reg |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg &= ~IXGBE_LED_BLINK(index); - led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register * @hw: pointer to hardware structure * @reg: analog register to read @@ -1128,8 +1073,8 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .get_link_capabilities = &ixgbe_get_link_capabilities_82598, .led_on = &ixgbe_led_on_generic, .led_off = &ixgbe_led_off_generic, - .blink_led_start = &ixgbe_blink_led_start_82598, - .blink_led_stop = &ixgbe_blink_led_stop_82598, + .blink_led_start = &ixgbe_blink_led_start_generic, + .blink_led_stop = &ixgbe_blink_led_stop_generic, .set_rar = &ixgbe_set_rar_generic, .clear_rar = &ixgbe_clear_rar_generic, .set_vmdq = &ixgbe_set_vmdq_82598, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index beae7e0..29771fb 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -68,8 +68,6 @@ s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on); s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw); -s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index); s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw); s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val); s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val); @@ -991,40 +989,6 @@ s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw) } /** - * ixgbe_blink_led_start_82599 - Blink LED based on index. - * @hw: pointer to hardware structure - * @index: led number to blink - **/ -s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index) -{ - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_blink_led_stop_82599 - Stop blinking LED based on index. - * @hw: pointer to hardware structure - * @index: led number to stop blinking - **/ -s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index) -{ - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg &= ~IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** * ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array * @hw: pointer to hardware structure **/ @@ -1243,8 +1207,8 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .get_link_capabilities = &ixgbe_get_link_capabilities_82599, .led_on = &ixgbe_led_on_generic, .led_off = &ixgbe_led_off_generic, - .blink_led_start = &ixgbe_blink_led_start_82599, - .blink_led_stop = &ixgbe_blink_led_stop_82599, + .blink_led_start = &ixgbe_blink_led_start_generic, + .blink_led_stop = &ixgbe_blink_led_stop_generic, .set_rar = &ixgbe_set_rar_generic, .clear_rar = &ixgbe_clear_rar_generic, .set_vmdq = &ixgbe_set_vmdq_82599, diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 63ab667..5567519 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -2071,3 +2071,58 @@ s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) return 0; } + +/** + * ixgbe_blink_led_start_generic - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink + **/ +s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) +{ + ixgbe_link_speed speed = 0; + bool link_up = 0; + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* + * Link must be up to auto-blink the LEDs; + * Force it if link is down. + */ + hw->mac.ops.check_link(hw, &speed, &link_up, false); + + if (!link_up) { + autoc_reg |= IXGBE_AUTOC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + msleep(10); + } + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking + **/ +s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + autoc_reg &= ~IXGBE_AUTOC_FLU; + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg &= ~IXGBE_LED_BLINK(index); + led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index 24f73e7..dd26089 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -76,6 +76,9 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); s32 ixgbe_read_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 *val); s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val); +s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index); + #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg))) #ifndef writeq -- cgit v0.10.2 From d6c519e12984d26d96b91e4482280acbba0e0a22 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 8 Apr 2009 13:20:50 +0000 Subject: ixgbe: only allow WOL for 82599 KX4 NIC All NICs were reporting WOL support when only the KX4 NIC is capable of supporting WOL. This patch adds a function to check for and exclude all non-WOL capable nics from enabling WOL in ethtool. Signed-off-by: Alexander Duyck Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index aafc120..f0a20fa 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -943,6 +943,24 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, } +static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter, + struct ethtool_wolinfo *wol) +{ + struct ixgbe_hw *hw = &adapter->hw; + int retval = 1; + + switch(hw->device_id) { + case IXGBE_DEV_ID_82599_KX4: + retval = 0; + break; + default: + wol->supported = 0; + retval = 0; + } + + return retval; +} + static void ixgbe_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) { @@ -952,7 +970,8 @@ static void ixgbe_get_wol(struct net_device *netdev, WAKE_BCAST | WAKE_MAGIC; wol->wolopts = 0; - if (!device_can_wakeup(&adapter->pdev->dev)) + if (ixgbe_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; if (adapter->wol & IXGBE_WUFC_EX) @@ -974,6 +993,9 @@ static int ixgbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; + if (ixgbe_wol_exclusion(adapter, wol)) + return wol->wolopts ? -EOPNOTSUPP : 0; + adapter->wol = 0; if (wol->wolopts & WAKE_UCAST) -- cgit v0.10.2 From 3384901f1b1af676ccb9d75aa23a568c294c527b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 8 Apr 2009 21:27:28 +0000 Subject: tr: fix leakage of device in net/802/tr.c Add dev_put() after dev_get_by_index() to avoid leakage of device. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/net/802/tr.c b/net/802/tr.c index e7eb130..e874447 100644 --- a/net/802/tr.c +++ b/net/802/tr.c @@ -561,6 +561,9 @@ static int rif_seq_show(struct seq_file *seq, void *v) } seq_putc(seq, '\n'); } + + if (dev) + dev_put(dev); } return 0; } -- cgit v0.10.2 From 57401d5e36d2966247e9c06b94f5133609c8da21 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 11 Apr 2009 01:52:29 -0700 Subject: phy: error handling for platform_device_register_simple() platform_device_register_simple() returns ERR_PTR() and not NULL. Found by smatch (http://repo.or.cz/w/smatch.git). Compile tested. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index cf24cc3..e707051 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -19,6 +19,7 @@ #include #include #include +#include #define MII_REGS_NUM 29 @@ -207,8 +208,8 @@ static int __init fixed_mdio_bus_init(void) int ret; pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0); - if (!pdev) { - ret = -ENOMEM; + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); goto err_pdev; } -- cgit v0.10.2 From 3ca17dfbdcaf3def764e72751619b1cc2c9760b9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=C3=A9guier=20R=C3=A9gis?= Date: Thu, 9 Apr 2009 01:33:57 +0000 Subject: via-velocity : fix compilation warning. Fix this warning: drivers/net/via-velocity.c:1924: warning: passing argument 2 of 'request_irq' from incompatible pointer type Signed-off-by: Seguier Regis Signed-off-by: David S. Miller diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index fb53ef8..754a4b1 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -377,7 +377,7 @@ static void velocity_print_info(struct velocity_info *vptr); static int velocity_open(struct net_device *dev); static int velocity_change_mtu(struct net_device *dev, int mtu); static int velocity_xmit(struct sk_buff *skb, struct net_device *dev); -static int velocity_intr(int irq, void *dev_instance); +static irqreturn_t velocity_intr(int irq, void *dev_instance); static void velocity_set_multi(struct net_device *dev); static struct net_device_stats *velocity_get_stats(struct net_device *dev); static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); @@ -2215,7 +2215,7 @@ out: * efficiently as possible. */ -static int velocity_intr(int irq, void *dev_instance) +static irqreturn_t velocity_intr(int irq, void *dev_instance) { struct net_device *dev = dev_instance; struct velocity_info *vptr = netdev_priv(dev); -- cgit v0.10.2 From 48f6e8990858fc9a0ca7d3c9347e6774eb941dba Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 9 Apr 2009 05:47:41 +0000 Subject: net: Update maintainers Essentially all networking changes go through David Miller. Jeff Garzik no longer handles device drivers separately. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index c3b2159..686b3dd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3177,18 +3177,12 @@ P: Paul Clements M: Paul.Clements@steeleye.com S: Maintained -NETWORK DEVICE DRIVERS -P: Jeff Garzik -M: jgarzik@pobox.com -L: netdev@vger.kernel.org -T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git -S: Maintained - NETWORKING [GENERAL] -P: Networking Team -M: netdev@vger.kernel.org +P: David S. Miller +M: davem@davemloft.net L: netdev@vger.kernel.org W: http://linux-net.osdl.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained NETWORKING [IPv4/IPv6] -- cgit v0.10.2 From 499923c7a3254971873e55a1690d07d3700eea47 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 9 Apr 2009 17:37:33 +0000 Subject: ipv6: Fix NULL pointer dereference with time-wait sockets Commit b2f5e7cd3dee2ed721bf0675e1a1ddebb849aee6 (ipv6: Fix conflict resolutions during ipv6 binding) introduced a regression where time-wait sockets were not treated correctly. This resulted in the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000062 IP: [] ipv4_rcv_saddr_equal+0x61/0x70 ... Call Trace: [] ipv6_rcv_saddr_equal+0x1bb/0x250 [ipv6] [] inet6_csk_bind_conflict+0x88/0xd0 [ipv6] [] inet_csk_get_port+0x1ee/0x400 [] inet6_bind+0x1cf/0x3a0 [ipv6] [] ? sockfd_lookup_light+0x3c/0xd0 [] sys_bind+0x89/0x100 [] ? trace_hardirqs_on_thunk+0x3a/0x3c [] system_call_fastpath+0x16/0x1b Tested-by: Brian Haley Tested-by: Ed Tomlinson Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/net/udp.h b/include/net/udp.h index 93dbe29..90e6ce5 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -124,8 +124,6 @@ static inline void udp_lib_close(struct sock *sk, long timeout) sk_common_release(sk); } -extern int ipv4_rcv_saddr_equal(const struct sock *sk1, - const struct sock *sk2); extern int udp_lib_get_port(struct sock *sk, unsigned short snum, int (*)(const struct sock*,const struct sock*)); diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index bda08a0..7a1d1ce 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -222,7 +222,7 @@ fail: return error; } -int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2) +static int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2) { struct inet_sock *inet1 = inet_sk(sk1), *inet2 = inet_sk(sk2); @@ -1823,7 +1823,6 @@ EXPORT_SYMBOL(udp_lib_getsockopt); EXPORT_SYMBOL(udp_lib_setsockopt); EXPORT_SYMBOL(udp_poll); EXPORT_SYMBOL(udp_lib_get_port); -EXPORT_SYMBOL(ipv4_rcv_saddr_equal); #ifdef CONFIG_PROC_FS EXPORT_SYMBOL(udp_proc_register); diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 6842dd2..8905712 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -53,6 +53,8 @@ int ipv6_rcv_saddr_equal(const struct sock *sk, const struct sock *sk2) { const struct in6_addr *sk_rcv_saddr6 = &inet6_sk(sk)->rcv_saddr; const struct in6_addr *sk2_rcv_saddr6 = inet6_rcv_saddr(sk2); + __be32 sk_rcv_saddr = inet_sk(sk)->rcv_saddr; + __be32 sk2_rcv_saddr = inet_rcv_saddr(sk2); int sk_ipv6only = ipv6_only_sock(sk); int sk2_ipv6only = inet_v6_ipv6only(sk2); int addr_type = ipv6_addr_type(sk_rcv_saddr6); @@ -60,7 +62,9 @@ int ipv6_rcv_saddr_equal(const struct sock *sk, const struct sock *sk2) /* if both are mapped, treat as IPv4 */ if (addr_type == IPV6_ADDR_MAPPED && addr_type2 == IPV6_ADDR_MAPPED) - return ipv4_rcv_saddr_equal(sk, sk2); + return (!sk2_ipv6only && + (!sk_rcv_saddr || !sk2_rcv_saddr || + sk_rcv_saddr == sk2_rcv_saddr)); if (addr_type2 == IPV6_ADDR_ANY && !(sk2_ipv6only && addr_type == IPV6_ADDR_MAPPED)) -- cgit v0.10.2 From 8c02acd79867077508ffa5ed4eb6c8c79df73a96 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 9 Apr 2009 04:46:53 +0000 Subject: fs_enet: convert to netdev_ops Reported-by: Subrata Modak Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index b037ce9..a9cbc31 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1019,6 +1019,22 @@ out_put_phy: #define IS_FEC(match) 0 #endif +static const struct net_device_ops fs_enet_netdev_ops = { + .ndo_open = fs_enet_open, + .ndo_stop = fs_enet_close, + .ndo_get_stats = fs_enet_get_stats, + .ndo_start_xmit = fs_enet_start_xmit, + .ndo_tx_timeout = fs_timeout, + .ndo_set_multicast_list = fs_set_multicast_list, + .ndo_do_ioctl = fs_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = fs_enet_netpoll, +#endif +}; + static int __devinit fs_enet_probe(struct of_device *ofdev, const struct of_device_id *match) { @@ -1093,22 +1109,13 @@ static int __devinit fs_enet_probe(struct of_device *ofdev, fep->tx_ring = fpi->tx_ring; fep->rx_ring = fpi->rx_ring; - ndev->open = fs_enet_open; - ndev->hard_start_xmit = fs_enet_start_xmit; - ndev->tx_timeout = fs_timeout; + ndev->netdev_ops = &fs_enet_netdev_ops; ndev->watchdog_timeo = 2 * HZ; - ndev->stop = fs_enet_close; - ndev->get_stats = fs_enet_get_stats; - ndev->set_multicast_list = fs_set_multicast_list; -#ifdef CONFIG_NET_POLL_CONTROLLER - ndev->poll_controller = fs_enet_netpoll; -#endif if (fpi->use_napi) netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi, fpi->napi_weight); ndev->ethtool_ops = &fs_ethtool_ops; - ndev->do_ioctl = fs_ioctl; init_timer(&fep->phy_timer_list); -- cgit v0.10.2 From 15efc02b2625f1bb2b1970b1f4bc777590b9ed73 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 9 Apr 2009 15:56:14 +0000 Subject: ibm_newemac: convert to netdev_ops Reported-by: Subrata Modak Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 77e4b5b..806533c 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2686,6 +2686,32 @@ static int __devinit emac_init_config(struct emac_instance *dev) return 0; } +static const struct net_device_ops emac_netdev_ops = { + .ndo_open = emac_open, + .ndo_stop = emac_close, + .ndo_get_stats = emac_stats, + .ndo_set_multicast_list = emac_set_multicast_list, + .ndo_do_ioctl = emac_ioctl, + .ndo_tx_timeout = emac_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_start_xmit = emac_start_xmit, + .ndo_change_mtu = eth_change_mtu, +}; + +static const struct net_device_ops emac_gige_netdev_ops = { + .ndo_open = emac_open, + .ndo_stop = emac_close, + .ndo_get_stats = emac_stats, + .ndo_set_multicast_list = emac_set_multicast_list, + .ndo_do_ioctl = emac_ioctl, + .ndo_tx_timeout = emac_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_start_xmit = emac_start_xmit_sg, + .ndo_change_mtu = emac_change_mtu, +}; + static int __devinit emac_probe(struct of_device *ofdev, const struct of_device_id *match) { @@ -2827,23 +2853,14 @@ static int __devinit emac_probe(struct of_device *ofdev, if (err != 0) goto err_detach_tah; - /* Fill in the driver function table */ - ndev->open = &emac_open; if (dev->tah_dev) ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; - ndev->tx_timeout = &emac_tx_timeout; ndev->watchdog_timeo = 5 * HZ; - ndev->stop = &emac_close; - ndev->get_stats = &emac_stats; - ndev->set_multicast_list = &emac_set_multicast_list; - ndev->do_ioctl = &emac_ioctl; if (emac_phy_supports_gige(dev->phy_mode)) { - ndev->hard_start_xmit = &emac_start_xmit_sg; - ndev->change_mtu = &emac_change_mtu; + ndev->netdev_ops = &emac_gige_netdev_ops; dev->commac.ops = &emac_commac_sg_ops; - } else { - ndev->hard_start_xmit = &emac_start_xmit; - } + } else + ndev->netdev_ops = &emac_netdev_ops; SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); netif_carrier_off(ndev); -- cgit v0.10.2 From f97b1f2a416045c7a9c7e62d575a809bc32c0f1e Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Fri, 10 Apr 2009 07:59:24 +0000 Subject: ariadne: convert to net_device_ops On Fri, Apr 10, 2009 at 06:13:54PM +0200, Jan Ceuleers wrote: > Alexander Beregalov wrote: > > > > Signed-off-by: Alexander Beregalov > ... > > @@ -197,13 +209,8 @@ static int __devinit ariadne_init_one(struct zorro_dev *z, > > dev->mem_start = ZTWO_VADDR(mem_start); > > dev->mem_end = dev->mem_start+ARIADNE_RAM_SIZE; > > > > - dev->open = &ariadne_open; > > - dev->stop = &ariadne_close; > > - dev->hard_start_xmit = &ariadne_start_xmit; > > - dev->tx_timeout = &ariadne_tx_timeout; > > + dev->netdev_ops = &ariadne_netdev_ops;; > > We don't really need two semicolons there but I suppose that they won't > hurt. Thanks! David, please apply this patch Signed-off-by: David S. Miller diff --git a/drivers/net/ariadne.c b/drivers/net/ariadne.c index e1d72e0..58e8d52 100644 --- a/drivers/net/ariadne.c +++ b/drivers/net/ariadne.c @@ -155,6 +155,18 @@ static struct zorro_driver ariadne_driver = { .remove = __devexit_p(ariadne_remove_one), }; +static const struct net_device_ops ariadne_netdev_ops = { + .ndo_open = ariadne_open, + .ndo_stop = ariadne_close, + .ndo_start_xmit = ariadne_start_xmit, + .ndo_tx_timeout = ariadne_tx_timeout, + .ndo_get_stats = ariadne_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __devinit ariadne_init_one(struct zorro_dev *z, const struct zorro_device_id *ent) { @@ -197,13 +209,8 @@ static int __devinit ariadne_init_one(struct zorro_dev *z, dev->mem_start = ZTWO_VADDR(mem_start); dev->mem_end = dev->mem_start+ARIADNE_RAM_SIZE; - dev->open = &ariadne_open; - dev->stop = &ariadne_close; - dev->hard_start_xmit = &ariadne_start_xmit; - dev->tx_timeout = &ariadne_tx_timeout; + dev->netdev_ops = &ariadne_netdev_ops; dev->watchdog_timeo = 5*HZ; - dev->get_stats = &ariadne_get_stats; - dev->set_multicast_list = &set_multicast_list; err = register_netdev(dev); if (err) { -- cgit v0.10.2 From fefbfb1e09cbcd5ad6fd595c52aa8f01dc4e1126 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 9 Apr 2009 17:25:25 +0000 Subject: am79c961a: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 4bc6901..627bc75 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -665,6 +665,20 @@ static void __init am79c961_banner(void) if (net_debug && version_printed++ == 0) printk(KERN_INFO "%s", version); } +static const struct net_device_ops am79c961_netdev_ops = { + .ndo_open = am79c961_open, + .ndo_stop = am79c961_close, + .ndo_start_xmit = am79c961_sendpacket, + .ndo_get_stats = am79c961_getstats, + .ndo_set_multicast_list = am79c961_setmulticastlist, + .ndo_tx_timeout = am79c961_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = am79c961_poll_controller, +#endif +}; static int __init am79c961_probe(struct platform_device *pdev) { @@ -732,15 +746,7 @@ static int __init am79c961_probe(struct platform_device *pdev) if (am79c961_hw_init(dev)) goto release; - dev->open = am79c961_open; - dev->stop = am79c961_close; - dev->hard_start_xmit = am79c961_sendpacket; - dev->get_stats = am79c961_getstats; - dev->set_multicast_list = am79c961_setmulticastlist; - dev->tx_timeout = am79c961_timeout; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = am79c961_poll_controller; -#endif + dev->netdev_ops = &am79c961_netdev_ops; ret = register_netdev(dev); if (ret == 0) { -- cgit v0.10.2 From 531c6804a4299663c7fa798ebfa9dbf843e91e0e Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 9 Apr 2009 17:27:00 +0000 Subject: at91_ether: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 442938d..7f4bc8a 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -577,7 +577,7 @@ static void at91ether_sethashtable(struct net_device *dev) /* * Enable/Disable promiscuous and multicast modes. */ -static void at91ether_set_rx_mode(struct net_device *dev) +static void at91ether_set_multicast_list(struct net_device *dev) { unsigned long cfg; @@ -808,7 +808,7 @@ static int at91ether_close(struct net_device *dev) /* * Transmit packet. */ -static int at91ether_tx(struct sk_buff *skb, struct net_device *dev) +static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct at91_private *lp = netdev_priv(dev); @@ -828,7 +828,7 @@ static int at91ether_tx(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; } else { - printk(KERN_ERR "at91_ether.c: at91ether_tx() called, but device is busy!\n"); + printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n"); return 1; /* if we return anything but zero, dev.c:1055 calls kfree_skb(skb) on this skb, he also reports -ENETDOWN and printk's, so either we free and return(0) or don't free and return 1 */ @@ -965,6 +965,21 @@ static void at91ether_poll_controller(struct net_device *dev) } #endif +static const struct net_device_ops at91ether_netdev_ops = { + .ndo_open = at91ether_open, + .ndo_stop = at91ether_close, + .ndo_start_xmit = at91ether_start_xmit, + .ndo_get_stats = at91ether_stats, + .ndo_set_multicast_list = at91ether_set_multicast_list, + .ndo_set_mac_address = set_mac_address, + .ndo_do_ioctl = at91ether_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = at91ether_poll_controller, +#endif +}; + /* * Initialize the ethernet interface */ @@ -1005,17 +1020,8 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add spin_lock_init(&lp->lock); ether_setup(dev); - dev->open = at91ether_open; - dev->stop = at91ether_close; - dev->hard_start_xmit = at91ether_tx; - dev->get_stats = at91ether_stats; - dev->set_multicast_list = at91ether_set_rx_mode; - dev->set_mac_address = set_mac_address; + dev->netdev_ops = &at91ether_netdev_ops; dev->ethtool_ops = &at91ether_ethtool_ops; - dev->do_ioctl = at91ether_ioctl; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = at91ether_poll_controller; -#endif SET_NETDEV_DEV(dev, &pdev->dev); -- cgit v0.10.2 From 9aa7b30ce36f3bfa03b878296d55e0551682de15 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 9 Apr 2009 17:28:06 +0000 Subject: ep93xx_eth: convert to net_device_ops Also make ep93xx_dev_alloc static. Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index cc77087..4173677 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -770,7 +770,18 @@ static struct ethtool_ops ep93xx_ethtool_ops = { .get_link = ep93xx_get_link, }; -struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data) +static const struct net_device_ops ep93xx_netdev_ops = { + .ndo_open = ep93xx_open, + .ndo_stop = ep93xx_close, + .ndo_start_xmit = ep93xx_xmit, + .ndo_get_stats = ep93xx_get_stats, + .ndo_do_ioctl = ep93xx_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + +static struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data) { struct net_device *dev; @@ -780,12 +791,8 @@ struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data) memcpy(dev->dev_addr, data->dev_addr, ETH_ALEN); - dev->get_stats = ep93xx_get_stats; dev->ethtool_ops = &ep93xx_ethtool_ops; - dev->hard_start_xmit = ep93xx_xmit; - dev->open = ep93xx_open; - dev->stop = ep93xx_close; - dev->do_ioctl = ep93xx_ioctl; + dev->netdev_ops = &ep93xx_netdev_ops; dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM; -- cgit v0.10.2 From 0b179e315ad61e8969b984a4ab4acc65e5ecb506 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 9 Apr 2009 17:28:55 +0000 Subject: ether1: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c index e380de4..edf770f 100644 --- a/drivers/net/arm/ether1.c +++ b/drivers/net/arm/ether1.c @@ -991,6 +991,18 @@ static void __devinit ether1_banner(void) printk(KERN_INFO "%s", version); } +static const struct net_device_ops ether1_netdev_ops = { + .ndo_open = ether1_open, + .ndo_stop = ether1_close, + .ndo_start_xmit = ether1_sendpacket, + .ndo_get_stats = ether1_getstats, + .ndo_set_multicast_list = ether1_setmulticastlist, + .ndo_tx_timeout = ether1_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __devinit ether1_probe(struct expansion_card *ec, const struct ecard_id *id) { @@ -1031,12 +1043,7 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id) goto free; } - dev->open = ether1_open; - dev->stop = ether1_close; - dev->hard_start_xmit = ether1_sendpacket; - dev->get_stats = ether1_getstats; - dev->set_multicast_list = ether1_setmulticastlist; - dev->tx_timeout = ether1_timeout; + dev->netdev_ops = ðer1_netdev_ops; dev->watchdog_timeo = 5 * HZ / 100; ret = register_netdev(dev); -- cgit v0.10.2 From fe146be67bd73aa35db032fe3481ca20efe17fcc Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 9 Apr 2009 17:29:38 +0000 Subject: ether3: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c index 21a7bef..ec8a1ae 100644 --- a/drivers/net/arm/ether3.c +++ b/drivers/net/arm/ether3.c @@ -770,6 +770,18 @@ static void __devinit ether3_banner(void) printk(KERN_INFO "%s", version); } +static const struct net_device_ops ether3_netdev_ops = { + .ndo_open = ether3_open, + .ndo_stop = ether3_close, + .ndo_start_xmit = ether3_sendpacket, + .ndo_get_stats = ether3_getstats, + .ndo_set_multicast_list = ether3_setmulticastlist, + .ndo_tx_timeout = ether3_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __devinit ether3_probe(struct expansion_card *ec, const struct ecard_id *id) { @@ -846,12 +858,7 @@ ether3_probe(struct expansion_card *ec, const struct ecard_id *id) goto free; } - dev->open = ether3_open; - dev->stop = ether3_close; - dev->hard_start_xmit = ether3_sendpacket; - dev->get_stats = ether3_getstats; - dev->set_multicast_list = ether3_setmulticastlist; - dev->tx_timeout = ether3_timeout; + dev->netdev_ops = ðer3_netdev_ops; dev->watchdog_timeo = 5 * HZ / 100; ret = register_netdev(dev); -- cgit v0.10.2 From ff6f63dde73e0673c09cca22c5005380dfcc79a4 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 9 Apr 2009 22:49:02 +0000 Subject: igb: fix unused external references introduced with sr-iov changes There were several unused external references added with the sr-iov enablement changes. This patch changes all those references to static local references. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index f4c315b..472f3f1 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -111,7 +111,7 @@ void igb_clear_vfta(struct e1000_hw *hw) * Writes value at the given offset in the register array which stores * the VLAN filter table. **/ -void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) +static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) { array_wr32(E1000_VFTA, offset, value); wrfl(); diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index a34de52..1d690b4 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -66,7 +66,6 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); s32 igb_check_alt_mac_addr(struct e1000_hw *hw); void igb_reset_adaptive(struct e1000_hw *hw); void igb_update_adaptive(struct e1000_hw *hw); -void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); bool igb_enable_mng_pass_thru(struct e1000_hw *hw); diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c index fe71c7d..840782f 100644 --- a/drivers/net/igb/e1000_mbx.c +++ b/drivers/net/igb/e1000_mbx.c @@ -188,7 +188,7 @@ out: * returns SUCCESS if it successfully received a message notification and * copied it into the receive buffer. **/ -s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) { struct e1000_mbx_info *mbx = &hw->mbx; s32 ret_val = -E1000_ERR_MBX; @@ -214,7 +214,7 @@ out: * returns SUCCESS if it successfully copied message into the buffer and * received an ack to that message within delay * timeout period **/ -s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) { struct e1000_mbx_info *mbx = &hw->mbx; s32 ret_val = 0; @@ -232,19 +232,6 @@ out: return ret_val; } -/** - * e1000_init_mbx_ops_generic - Initialize NVM function pointers - * @hw: pointer to the HW structure - * - * Setups up the function pointers to no-op functions - **/ -void e1000_init_mbx_ops_generic(struct e1000_hw *hw) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - mbx->ops.read_posted = igb_read_posted_mbx; - mbx->ops.write_posted = igb_write_posted_mbx; -} - static s32 igb_check_for_bit_pf(struct e1000_hw *hw, u32 mask) { u32 mbvficr = rd32(E1000_MBVFICR); diff --git a/drivers/net/igb/e1000_mbx.h b/drivers/net/igb/e1000_mbx.h index 6ec9890..ebc02ea 100644 --- a/drivers/net/igb/e1000_mbx.h +++ b/drivers/net/igb/e1000_mbx.h @@ -67,8 +67,6 @@ s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16); s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16); -s32 igb_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16); -s32 igb_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16); s32 igb_check_for_msg(struct e1000_hw *, u16); s32 igb_check_for_ack(struct e1000_hw *, u16); s32 igb_check_for_rst(struct e1000_hw *, u16); -- cgit v0.10.2 From 2d165771062cae75de26fe7bc7cb2d937ff6f1b4 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 9 Apr 2009 22:49:20 +0000 Subject: igbvf: fix unused external references The igbvbf driver exposed several unused extrnal references due to the fact that code was copied from igb and then some functionality was removed. This changes that so that unused functions are either removed or made static. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h index 936ed2a..4bff35e 100644 --- a/drivers/net/igbvf/igbvf.h +++ b/drivers/net/igbvf/igbvf.h @@ -321,14 +321,11 @@ extern void igbvf_set_ethtool_ops(struct net_device *); extern int igbvf_up(struct igbvf_adapter *); extern void igbvf_down(struct igbvf_adapter *); extern void igbvf_reinit_locked(struct igbvf_adapter *); -extern void igbvf_reset(struct igbvf_adapter *); extern int igbvf_setup_rx_resources(struct igbvf_adapter *, struct igbvf_ring *); extern int igbvf_setup_tx_resources(struct igbvf_adapter *, struct igbvf_ring *); extern void igbvf_free_rx_resources(struct igbvf_ring *); extern void igbvf_free_tx_resources(struct igbvf_ring *); extern void igbvf_update_stats(struct igbvf_adapter *); -extern void igbvf_set_interrupt_capability(struct igbvf_adapter *); -extern void igbvf_reset_interrupt_capability(struct igbvf_adapter *); extern unsigned int copybreak; diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index c564842..b774666 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -52,6 +52,9 @@ static const char igbvf_driver_string[] = static const char igbvf_copyright[] = "Copyright (c) 2009 Intel Corporation."; static int igbvf_poll(struct napi_struct *napi, int budget); +static void igbvf_reset(struct igbvf_adapter *); +static void igbvf_set_interrupt_capability(struct igbvf_adapter *); +static void igbvf_reset_interrupt_capability(struct igbvf_adapter *); static struct igbvf_info igbvf_vf_info = { .mac = e1000_vfadapt, @@ -990,7 +993,7 @@ static void igbvf_configure_msix(struct igbvf_adapter *adapter) e1e_flush(); } -void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter) +static void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter) { if (adapter->msix_entries) { pci_disable_msix(adapter->pdev); @@ -1005,7 +1008,7 @@ void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter) * Attempt to configure interrupts using the best available * capabilities of the hardware and kernel. **/ -void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter) +static void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter) { int err = -ENOMEM; int i; @@ -1447,7 +1450,7 @@ static void igbvf_configure(struct igbvf_adapter *adapter) * set/changed during runtime. After reset the device needs to be * properly configured for Rx, Tx etc. */ -void igbvf_reset(struct igbvf_adapter *adapter) +static void igbvf_reset(struct igbvf_adapter *adapter) { struct e1000_mac_info *mac = &adapter->hw.mac; struct net_device *netdev = adapter->netdev; diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c index aa246c9..2a4faf9 100644 --- a/drivers/net/igbvf/vf.c +++ b/drivers/net/igbvf/vf.c @@ -44,7 +44,7 @@ static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool); * e1000_init_mac_params_vf - Inits MAC params * @hw: pointer to the HW structure **/ -s32 e1000_init_mac_params_vf(struct e1000_hw *hw) +static s32 e1000_init_mac_params_vf(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; diff --git a/drivers/net/igbvf/vf.h b/drivers/net/igbvf/vf.h index ec07228..1e8ce37 100644 --- a/drivers/net/igbvf/vf.h +++ b/drivers/net/igbvf/vf.h @@ -259,7 +259,6 @@ struct e1000_hw { /* These functions must be implemented by drivers */ void e1000_rlpml_set_vf(struct e1000_hw *, u16); void e1000_init_function_pointers_vf(struct e1000_hw *hw); -s32 e1000_init_mac_params_vf(struct e1000_hw *hw); #endif /* _E1000_VF_H_ */ -- cgit v0.10.2 From 9ca046d57412361ac4d220b96fed7fb932616d85 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 9 Apr 2009 22:49:39 +0000 Subject: igb: do not check for vf_data if we didn't enable vfs The driver is currently dumping a message in the log about failing to allocate vf data when max_vfs is equal to 0. This change makes it so the error message is only displayed if we set max_vfs to a non zero value. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index db7274e..08c8014 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1261,25 +1261,32 @@ static int __devinit igb_probe(struct pci_dev *pdev, int i; unsigned char mac_addr[ETH_ALEN]; - if (num_vfs) + if (num_vfs) { adapter->vf_data = kcalloc(num_vfs, sizeof(struct vf_data_storage), GFP_KERNEL); - if (!adapter->vf_data) { - dev_err(&pdev->dev, "Could not allocate VF private " - "data - IOV enable failed\n"); - } else { - err = pci_enable_sriov(pdev, num_vfs); - if (!err) { - adapter->vfs_allocated_count = num_vfs; - dev_info(&pdev->dev, "%d vfs allocated\n", num_vfs); - for (i = 0; i < adapter->vfs_allocated_count; i++) { - random_ether_addr(mac_addr); - igb_set_vf_mac(adapter, i, mac_addr); - } + if (!adapter->vf_data) { + dev_err(&pdev->dev, + "Could not allocate VF private data - " + "IOV enable failed\n"); } else { - kfree(adapter->vf_data); - adapter->vf_data = NULL; + err = pci_enable_sriov(pdev, num_vfs); + if (!err) { + adapter->vfs_allocated_count = num_vfs; + dev_info(&pdev->dev, + "%d vfs allocated\n", + num_vfs); + for (i = 0; + i < adapter->vfs_allocated_count; + i++) { + random_ether_addr(mac_addr); + igb_set_vf_mac(adapter, i, + mac_addr); + } + } else { + kfree(adapter->vf_data); + adapter->vf_data = NULL; + } } } } -- cgit v0.10.2 From d6de2c80e9d758d2e36c21699117db6178c0f517 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 10 Apr 2009 12:17:41 -0700 Subject: async: Fix module loading async-work regression Several drivers use asynchronous work to do device discovery, and we synchronize with them in the compiled-in case before we actually try to mount root filesystems etc. However, when compiled as modules, that synchronization is missing - the module loading completes, but the driver hasn't actually finished probing for devices, and that means that any user mode that expects to use the devices after the 'insmod' is now potentially broken. We already saw one case of a similar issue in the ACPI battery code, where the kernel itself expected the module to be all done, and unmapped the init memory - but the async device discovery was still running. That got hacked around by just removing the "__init" (see commit 5d38258ec026921a7b266f4047ebeaa75db358e5 "ACPI battery: fix async boot oops"), but the real fix is to just make the module loading wait for all async work to be completed. It will slow down module loading, but since common devices should be built in anyway, and since the bug is really annoying and hard to handle from user space (and caused several S3 resume regressions), the simple fix to wait is the right one. This fixes at least http://bugzilla.kernel.org/show_bug.cgi?id=13063 but probably a few other bugzilla entries too (12936, for example), and is confirmed to fix Rafael's storage driver breakage after resume bug report (no bugzilla entry). We should also be able to now revert that ACPI battery fix. Reported-and-tested-by: Rafael J. Wysocki Tested-by: Heinz Diehl Acked-by: Arjan van de Ven Signed-off-by: Linus Torvalds diff --git a/kernel/module.c b/kernel/module.c index 05f014e..e797812 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2388,6 +2388,9 @@ SYSCALL_DEFINE3(init_module, void __user *, umod, blocking_notifier_call_chain(&module_notify_list, MODULE_STATE_LIVE, mod); + /* We need to finish all async code before the module init sequence is done */ + async_synchronize_full(); + mutex_lock(&module_mutex); /* Drop initial reference. */ module_put(mod); -- cgit v0.10.2 From b0cbc861a3c05e634520b049b5cc27ad6febb51f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 11 Apr 2009 12:45:20 -0700 Subject: Revert "ACPI battery: fix async boot oops" This reverts commit 5d38258ec026921a7b266f4047ebeaa75db358e5, since the underlying problem got fixed properly in the previous commit ("async: Fix module loading async-work regression"). Cc: Arkadiusz Miskiewicz Cc: Vegard Nossum Cc: Len Brown Signed-off-by: Linus Torvalds diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 3c7d894..b0de631 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -903,7 +903,7 @@ static struct acpi_driver acpi_battery_driver = { }, }; -static void acpi_battery_init_async(void *unused, async_cookie_t cookie) +static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie) { if (acpi_disabled) return; -- cgit v0.10.2 From 5ea2fc6491631d2c3f346dcb0d9d6edd44ccf4cd Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 9 Apr 2009 11:36:50 -0700 Subject: Input: i8042 - introduce a tougher reset Some touchpads don't reset right the first time (MSI Wind U-100 for example). This patch will retry the reset up to 5 times. In addition, on x86, we don't fail entire i8042 initialization if controller reset fails in hope that keyboard port will still be functional and user will still get a working keyboard. This is especially important on netbooks. Signed-off-by: Arjan van de Ven Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 170f71e..3cffb70 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -712,22 +712,43 @@ static int i8042_controller_check(void) static int i8042_controller_selftest(void) { unsigned char param; + int i = 0; if (!i8042_reset) return 0; - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { - printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); - return -ENODEV; - } + /* + * We try this 5 times; on some really fragile systems this does not + * take the first time... + */ + do { + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { + printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); + return -ENODEV; + } + + if (param == I8042_RET_CTL_TEST) + return 0; - if (param != I8042_RET_CTL_TEST) { printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", - param, I8042_RET_CTL_TEST); - return -EIO; - } + param, I8042_RET_CTL_TEST); + msleep(50); + } while (i++ < 5); +#ifdef CONFIG_X86 + /* + * On x86, we don't fail entire i8042 initialization if controller + * reset fails in hopes that keyboard port will still be functional + * and user will still get a working keyboard. This is especially + * important on netbooks. On other arches we trust hardware more. + */ + printk(KERN_INFO + "i8042: giving up on controller selftest, continuing anyway...\n"); return 0; +#else + return -EIO; +#endif } /* -- cgit v0.10.2 From 7c46e23681ebca23249806b379125cf72b7435b6 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sat, 11 Apr 2009 16:50:13 -0700 Subject: Input: i8042 - add a DMI table for the i8042.reset option There are several DMI tables in the i8042 (keyboard) driver already, but not one for the i8042.reset option. This patch adds such an option. Two users for this table are added as well, the MSI Wind U-100 and the LG X110. The MSI Wind also needs to be in the "don't trust the pnp data" for the touchpad to work on my machine. Signed-off-by: Arjan van de Ven Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 83ed2d5..fb8a3cd 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -377,6 +377,24 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { { } }; +static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { + { + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "U-100"), + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + }, + }, + { + .ident = "LG Electronics X110", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "X110"), + DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), + }, + }, + { } +}; + #ifdef CONFIG_PNP static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { { @@ -386,6 +404,13 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), }, }, + { + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "U-100"), + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + }, + }, { } }; #endif @@ -698,6 +723,9 @@ static int __init i8042_platform_init(void) #endif #ifdef CONFIG_X86 + if (dmi_check_system(i8042_dmi_reset_table)) + i8042_reset = 1; + if (dmi_check_system(i8042_dmi_noloop_table)) i8042_noloop = 1; -- cgit v0.10.2 From b79e83bdd961ec9b862191c0df51aaeb3cb85664 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sat, 11 Apr 2009 16:50:15 -0700 Subject: Input: remove unnecessary synchronize_rcu() call There is no need to issue serialize_rcu() after adding a new handle to the list of handles associated with the device because new events will "see" the new handle in the list immediately. Remove it so we can boot a little bit faster. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input.c b/drivers/input/input.c index 913392f..a79c833 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1551,7 +1551,6 @@ int input_register_handle(struct input_handle *handle) return error; list_add_tail_rcu(&handle->d_node, &dev->h_list); mutex_unlock(&dev->mutex); - synchronize_rcu(); /* * Since we are supposed to be called from ->connect() -- cgit v0.10.2 From fd746d540abf8c686f5f868ae62112692e684088 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sat, 11 Apr 2009 16:54:59 -0700 Subject: Input: ads7846 - introduce platform specific way to synchronize sampling Noises can be introduced when LCD signals are being driven, some platforms provide a signal to assist the synchronization of this sampling procedure. Signed-off-by: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 7c27c8b..cf7e697 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -127,6 +127,8 @@ struct ads7846 { void (*filter_cleanup)(void *data); int (*get_pendown_state)(void); int gpio_pendown; + + void (*wait_for_sync)(void); }; /* leave chip selected when we're done, for quicker re-select? */ @@ -511,6 +513,10 @@ static int get_pendown_state(struct ads7846 *ts) return !gpio_get_value(ts->gpio_pendown); } +static void null_wait_for_sync(void) +{ +} + /* * PENIRQ only kicks the timer. The timer only reissues the SPI transfer, * to retrieve touchscreen status. @@ -686,6 +692,7 @@ static void ads7846_rx_val(void *ads) default: BUG(); } + ts->wait_for_sync(); status = spi_async(ts->spi, m); if (status) dev_err(&ts->spi->dev, "spi_async --> %d\n", @@ -723,6 +730,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle) } else { /* pen is still down, continue with the measurement */ ts->msg_idx = 0; + ts->wait_for_sync(); status = spi_async(ts->spi, &ts->msg[0]); if (status) dev_err(&ts->spi->dev, "spi_async --> %d\n", status); @@ -947,6 +955,8 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->penirq_recheck_delay_usecs = pdata->penirq_recheck_delay_usecs; + ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync; + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); input_dev->name = "ADS784x Touchscreen"; diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 05eab2f..2ea2032 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -51,5 +51,6 @@ struct ads7846_platform_data { void **filter_data); int (*filter) (void *filter_data, int data_idx, int *val); void (*filter_cleanup)(void *filter_data); + void (*wait_for_sync)(void); }; -- cgit v0.10.2 From 4f295232bef43adf648876a0cd950faa99daa5f1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Apr 2009 16:50:17 -0700 Subject: Input: wm97xx - don't specify IRQF_SAMPLE_RANDOM The input core will add entropy to the pool so this flag is not needed. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index cec480b..69af838 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -370,8 +370,7 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm) * provided. */ BUG_ON(!wm->mach_ops->irq_enable); - if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, + if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED, "wm97xx-pen", wm)) { dev_err(wm->dev, "Failed to register pen down interrupt, polling"); -- cgit v0.10.2 From 8433a40eb7f2c4883ad57f9900f63e4d59240eb7 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sat, 11 Apr 2009 15:52:18 +0800 Subject: tracing/filters: NIL-terminate user input filter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make sure messages from user space are NIL-terminated strings, otherwise we could dump random memory while reading filter file. Try this: # echo 'parent_comm ==' > events/sched/sched_process_fork/filter # cat events/sched/sched_process_fork/filter parent_comm == � Signed-off-by: Li Zefan Acked-by: Tom Zanussi Acked-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49E04C32.6060508@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 64ec4d2..054bc18 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -503,6 +503,7 @@ event_filter_write(struct file *filp, const char __user *ubuf, size_t cnt, if (copy_from_user(&buf, ubuf, cnt)) return -EFAULT; + buf[cnt] = '\0'; pred = kzalloc(sizeof(*pred), GFP_KERNEL); if (!pred) @@ -569,6 +570,7 @@ subsystem_filter_write(struct file *filp, const char __user *ubuf, size_t cnt, if (copy_from_user(&buf, ubuf, cnt)) return -EFAULT; + buf[cnt] = '\0'; pred = kzalloc(sizeof(*pred), GFP_KERNEL); if (!pred) -- cgit v0.10.2 From bcabd91c271e50eebc0cb9220ac92700332b452e Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sat, 11 Apr 2009 15:52:35 +0800 Subject: tracing/filters: fix NULL pointer dereference Try this, and you'll see NULL pointer dereference bug: # echo -n 'parent_comm ==' > sched/sched_process_fork/filter Because we passed NULL ptr to simple_strtoull(). Signed-off-by: Li Zefan Acked-by: Tom Zanussi Acked-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49E04C43.1050504@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 026be41..9d2162f 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -410,6 +410,11 @@ int filter_parse(char **pbuf, struct filter_pred *pred) } } + if (!val_str) { + pred->field_name = NULL; + return -EINVAL; + } + pred->field_name = kstrdup(pred->field_name, GFP_KERNEL); if (!pred->field_name) return -ENOMEM; -- cgit v0.10.2 From a3e0ab050774117d4a6173087c8bf3888662a83f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sat, 11 Apr 2009 15:52:51 +0800 Subject: tracing/filters: allow user input integer to be oct or hex Before patch: # echo 'parent_pid == 0x10' > events/sched/sched_process_fork/filter # cat sched/sched_process_fork/filter parent_pid == 0 After patch: # cat sched/sched_process_fork/filter parent_pid == 16 Also check the input more strictly. Signed-off-by: Li Zefan Acked-by: Tom Zanussi Acked-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49E04C53.4010600@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 9d2162f..49b3ef5 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -419,12 +419,13 @@ int filter_parse(char **pbuf, struct filter_pred *pred) if (!pred->field_name) return -ENOMEM; - pred->val = simple_strtoull(val_str, &tmp, 10); + pred->val = simple_strtoull(val_str, &tmp, 0); if (tmp == val_str) { pred->str_val = kstrdup(val_str, GFP_KERNEL); if (!pred->str_val) return -ENOMEM; - } + } else if (*tmp != '\0') + return -EINVAL; return 0; } -- cgit v0.10.2 From 44e9c8b7adc52079f0535f9de0c2c2477831389b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sat, 11 Apr 2009 15:55:28 +0800 Subject: tracing/filters: return proper error code when writing filter file - propagate return value of filter_add_pred() to the user - return -ENOSPC but not -ENOMEM or -EINVAL when the filter array is full Signed-off-by: Li Zefan Acked-by: Tom Zanussi Acked-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49E04CF0.3010105@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 054bc18..576f4fa 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -521,9 +521,10 @@ event_filter_write(struct file *filp, const char __user *ubuf, size_t cnt, return cnt; } - if (filter_add_pred(call, pred)) { + err = filter_add_pred(call, pred); + if (err < 0) { filter_free_pred(pred); - return -EINVAL; + return err; } *ppos += cnt; @@ -588,10 +589,11 @@ subsystem_filter_write(struct file *filp, const char __user *ubuf, size_t cnt, return cnt; } - if (filter_add_subsystem_pred(system, pred)) { + err = filter_add_subsystem_pred(system, pred); + if (err < 0) { filter_free_subsystem_preds(system); filter_free_pred(pred); - return -EINVAL; + return err; } *ppos += cnt; diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 49b3ef5..e03cbf1 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -215,7 +215,7 @@ static int __filter_add_pred(struct ftrace_event_call *call, } } - return -ENOMEM; + return -ENOSPC; } static int is_string_field(const char *type) @@ -319,7 +319,7 @@ int filter_add_subsystem_pred(struct event_subsystem *system, } if (i == MAX_FILTER_PRED) - return -EINVAL; + return -ENOSPC; events_for_each(call) { int err; -- cgit v0.10.2 From 575922248c0df490843ddfbcf3bc65b54c4adb08 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Sat, 11 Apr 2009 09:04:59 +0600 Subject: x86: Fix section mismatches in mpparse Impact: fix section mismatch In arch/x86/kernel/mpparse.c, smp_reserve_bootmem() has been called and also refers to a function which is in .init section. Thus causes the first warning. And check_irq_src() also requires an __init, because it refers to an .init section. Signed-off-by: Rakib Mullick Cc: Andrew Morton LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index dce99dc..70fd7e4 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -679,7 +679,7 @@ void __init get_smp_config(void) __get_smp_config(0); } -static void smp_reserve_bootmem(struct mpf_intel *mpf) +static void __init smp_reserve_bootmem(struct mpf_intel *mpf) { unsigned long size = get_mpc_size(mpf->physptr); #ifdef CONFIG_X86_32 @@ -838,7 +838,7 @@ static int __init get_MP_intsrc_index(struct mpc_intsrc *m) static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM]; -static void check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) +static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) { int i; @@ -866,7 +866,8 @@ static void check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) } } #else /* CONFIG_X86_IO_APIC */ -static inline void check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {} +static +inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {} #endif /* CONFIG_X86_IO_APIC */ static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, -- cgit v0.10.2 From 1ee4bd92a7aa49eb66c8d5672e837090d3e7b7ff Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 10 Apr 2009 22:47:17 +0200 Subject: x86: fix wrong section of pat_disable & make it static pat_disable cannot be __cpuinit anymore because it's called from pat_init and the callchain looks like this: pat_disable [cpuinit] <- pat_init <- generic_set_all <- ipi_handler <- set_mtrr <- (other non init/cpuinit functions) WARNING: arch/x86/mm/built-in.o(.text+0x449e): Section mismatch in reference from the function pat_init() to the function .cpuinit.text:pat_disable() The function pat_init() references the function __cpuinit pat_disable(). This is often because pat_init lacks a __cpuinit annotation or the annotation of pat_disable is wrong. Non CONFIG_X86_PAT version of pat_disable is static inline, so this version can be static too (and there are no callers outside of this file). Signed-off-by: Marcin Slusarz Acked-by: Sam Ravnborg LKML-Reference: <49DFB055.6070405@gmail.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 640339e..c009a24 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -31,7 +31,7 @@ #ifdef CONFIG_X86_PAT int __read_mostly pat_enabled = 1; -void __cpuinit pat_disable(const char *reason) +static inline void pat_disable(const char *reason) { pat_enabled = 0; printk(KERN_INFO "%s\n", reason); -- cgit v0.10.2 From a30469e7921a6dd2067e9e836d7787cfa0105627 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 10 Apr 2009 15:21:24 -0700 Subject: x86: add linux kernel support for YMM state Impact: save/restore Intel-AVX state properly between tasks Intel Advanced Vector Extensions (AVX) introduce 256-bit vector processing capability. More about AVX at http://software.intel.com/sites/avx Add OS support for YMM state management using xsave/xrstor infrastructure to support AVX. Signed-off-by: Suresh Siddha LKML-Reference: <1239402084.27006.8057.camel@localhost.localdomain> Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 34c5237..fcf4d92 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -352,6 +352,11 @@ struct i387_soft_struct { u32 entry_eip; }; +struct ymmh_struct { + /* 16 * 16 bytes for each YMMH-reg = 256 bytes */ + u32 ymmh_space[64]; +}; + struct xsave_hdr_struct { u64 xstate_bv; u64 reserved1[2]; @@ -361,6 +366,7 @@ struct xsave_hdr_struct { struct xsave_struct { struct i387_fxsave_struct i387; struct xsave_hdr_struct xsave_hdr; + struct ymmh_struct ymmh; /* new processor state extensions will go here */ } __attribute__ ((packed, aligned (64))); diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h index ec66649..72e5a44 100644 --- a/arch/x86/include/asm/sigcontext.h +++ b/arch/x86/include/asm/sigcontext.h @@ -269,6 +269,11 @@ struct _xsave_hdr { __u64 reserved2[5]; }; +struct _ymmh_state { + /* 16 * 16 bytes for each YMMH-reg */ + __u32 ymmh_space[64]; +}; + /* * Extended state pointed by the fpstate pointer in the sigcontext. * In addition to the fpstate, information encoded in the xstate_hdr @@ -278,6 +283,7 @@ struct _xsave_hdr { struct _xstate { struct _fpstate fpstate; struct _xsave_hdr xstate_hdr; + struct _ymmh_state ymmh; /* new processor state extensions go here */ }; diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h index 08e9a1a..727acc1 100644 --- a/arch/x86/include/asm/xsave.h +++ b/arch/x86/include/asm/xsave.h @@ -7,6 +7,7 @@ #define XSTATE_FP 0x1 #define XSTATE_SSE 0x2 +#define XSTATE_YMM 0x4 #define XSTATE_FPSSE (XSTATE_FP | XSTATE_SSE) @@ -15,7 +16,7 @@ /* * These are the features that the OS can handle currently. */ -#define XCNTXT_MASK (XSTATE_FP | XSTATE_SSE) +#define XCNTXT_MASK (XSTATE_FP | XSTATE_SSE | XSTATE_YMM) #ifdef CONFIG_X86_64 #define REX_PREFIX "0x48, " diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 2b54fe0..0a5b04a 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -324,7 +324,7 @@ void __ref xsave_cntxt_init(void) } /* - * for now OS knows only about FP/SSE + * Support only the state known to OS. */ pcntxt_mask = pcntxt_mask & XCNTXT_MASK; xsave_init(); -- cgit v0.10.2 From 9eeba6138cefc0435695463ddadb0d95e0a6bcd2 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sat, 11 Apr 2009 03:17:17 +0200 Subject: lockdep: warn about lockdep disabling after kernel taint Impact: provide useful missing info for developers Kernel taint can occur in several situations such as warnings, load of prorietary or staging modules, bad page, etc... But when such taint happens, a developer might still be working on the kernel, expecting that lockdep is still enabled. But a taint disables lockdep without ever warning about it. Such a kernel behaviour doesn't really help for kernel development. This patch adds this missing warning. Since the taint is done most of the time after the main message that explain the real source issue, it seems safe to warn about it inside add_taint() so that it appears at last, without hurting the main information. v2: Use a generic helper to disable lockdep instead of an open coded xchg(). Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra LKML-Reference: <1239412638-6739-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 096476f..493dedb 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -2,12 +2,19 @@ #define __LINUX_DEBUG_LOCKING_H #include +#include struct task_struct; extern int debug_locks; extern int debug_locks_silent; + +static inline int __debug_locks_off(void) +{ + return xchg(&debug_locks, 0); +} + /* * Generic 'turn off all lock debugging' function: */ diff --git a/kernel/panic.c b/kernel/panic.c index 3fd8c5b..940ca14 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -213,8 +213,14 @@ unsigned long get_taint(void) void add_taint(unsigned flag) { - /* can't trust the integrity of the kernel anymore: */ - debug_locks = 0; + /* + * Can't trust the integrity of the kernel anymore. + * We don't call directly debug_locks_off() because the issue + * is not necessarily serious enough to set oops_in_progress to 1 + */ + if (__debug_locks_off()) + printk(KERN_WARNING "Disabling lockdep due to kernel taint\n"); + set_bit(flag, &tainted_mask); } EXPORT_SYMBOL(add_taint); diff --git a/lib/debug_locks.c b/lib/debug_locks.c index 0218b46..bc3b117 100644 --- a/lib/debug_locks.c +++ b/lib/debug_locks.c @@ -36,7 +36,7 @@ int debug_locks_silent; */ int debug_locks_off(void) { - if (xchg(&debug_locks, 0)) { + if (__debug_locks_off()) { if (!debug_locks_silent) { oops_in_progress = 1; console_verbose(); -- cgit v0.10.2 From 574bbe782057fdf0490dc7dec906a2dc26363e20 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sat, 11 Apr 2009 03:17:18 +0200 Subject: lockdep: continue lock debugging despite some taints Impact: broaden lockdep checks Lockdep is disabled after any kernel taints. This might be convenient to ignore bad locking issues which sources come from outside the kernel tree. Nevertheless, it might be a frustrating experience for the staging developers or those who experience a warning but are focused on another things that require lockdep. The v2 of this patch simply don't disable anymore lockdep in case of TAINT_CRAP and TAINT_WARN events. Signed-off-by: Frederic Weisbecker Cc: LTP Cc: Peter Zijlstra Cc: Greg KH LKML-Reference: <1239412638-6739-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar diff --git a/kernel/panic.c b/kernel/panic.c index 940ca14..934fb37 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -217,8 +217,10 @@ void add_taint(unsigned flag) * Can't trust the integrity of the kernel anymore. * We don't call directly debug_locks_off() because the issue * is not necessarily serious enough to set oops_in_progress to 1 + * Also we want to keep up lockdep for staging development and + * post-warning case. */ - if (__debug_locks_off()) + if (flag != TAINT_CRAP && flag != TAINT_WARN && __debug_locks_off()) printk(KERN_WARNING "Disabling lockdep due to kernel taint\n"); set_bit(flag, &tainted_mask); -- cgit v0.10.2 From c306af23e19d3c94c9229263c39fe487e915e774 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Thu, 26 Mar 2009 10:16:57 +0900 Subject: nilfs2: return f_fsid for statfs2 This follows the change of Coly Li's series ("fs: return f_fsid for statfs(2)"), and make nilfs2 return f_fsid info for statfs(2). Acked-by: Coly Li Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c index e117e1e..8a965f9 100644 --- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -476,11 +476,12 @@ static int nilfs_statfs(struct dentry *dentry, struct kstatfs *buf) { struct super_block *sb = dentry->d_sb; struct nilfs_sb_info *sbi = NILFS_SB(sb); + struct the_nilfs *nilfs = sbi->s_nilfs; + u64 id = huge_encode_dev(sb->s_bdev->bd_dev); unsigned long long blocks; unsigned long overhead; unsigned long nrsvblocks; sector_t nfreeblocks; - struct the_nilfs *nilfs = sbi->s_nilfs; int err; /* @@ -514,6 +515,9 @@ static int nilfs_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_files = atomic_read(&sbi->s_inodes_count); buf->f_ffree = 0; /* nilfs_count_free_inodes(sb); */ buf->f_namelen = NILFS_NAME_LEN; + buf->f_fsid.val[0] = (u32)id; + buf->f_fsid.val[1] = (u32)(id >> 32); + return 0; } -- cgit v0.10.2 From bcb48891b05b4179edc86298d3dccb2ce90d5413 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Fri, 27 Mar 2009 02:51:39 +0900 Subject: nilfs2: fix lockdep recursive locking warning on bmap The bmap semaphore of DAT file can be held while a bmap of other files is locked. This has caused the following false detection of lockdep check: mount.nilfs2/4667 is trying to acquire lock: (&bmap->b_sem){..--}, at: [] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2] but task is already holding lock: (&bmap->b_sem){..--}, at: [] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2] This will fix the false detection by distinguishing semaphores of the DAT and other files. Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c index 24638e0..064279e 100644 --- a/fs/nilfs2/bmap.c +++ b/fs/nilfs2/bmap.c @@ -688,6 +688,8 @@ static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_gc = { .bpop_translate = NULL, }; +static struct lock_class_key nilfs_bmap_dat_lock_key; + /** * nilfs_bmap_read - read a bmap from an inode * @bmap: bmap @@ -715,6 +717,7 @@ int nilfs_bmap_read(struct nilfs_bmap *bmap, struct nilfs_inode *raw_inode) bmap->b_pops = &nilfs_bmap_ptr_ops_p; bmap->b_last_allocated_key = 0; /* XXX: use macro */ bmap->b_last_allocated_ptr = NILFS_BMAP_NEW_PTR_INIT; + lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key); break; case NILFS_CPFILE_INO: case NILFS_SUFILE_INO: @@ -772,6 +775,7 @@ void nilfs_bmap_init_gcdat(struct nilfs_bmap *gcbmap, struct nilfs_bmap *bmap) { memcpy(gcbmap, bmap, sizeof(union nilfs_bmap_union)); init_rwsem(&gcbmap->b_sem); + lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key); gcbmap->b_inode = &NILFS_BMAP_I(gcbmap)->vfs_inode; } @@ -779,5 +783,6 @@ void nilfs_bmap_commit_gcdat(struct nilfs_bmap *gcbmap, struct nilfs_bmap *bmap) { memcpy(bmap, gcbmap, sizeof(union nilfs_bmap_union)); init_rwsem(&bmap->b_sem); + lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key); bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode; } -- cgit v0.10.2 From c2698e50e304cd29a7836f05452359a3306a405e Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Fri, 27 Mar 2009 02:53:12 +0900 Subject: nilfs2: fix lockdep recursive locking warning on meta data files This fixes the following false detection of lockdep against nilfs meta data files: ============================================= [ INFO: possible recursive locking detected ] 2.6.29 #26 --------------------------------------------- mount.nilfs2/4185 is trying to acquire lock: (&mi->mi_sem){----}, at: [] nilfs_sufile_get_stat+0x1e/0x105 [nilfs2] but task is already holding lock: (&mi->mi_sem){----}, at: [] nilfs_count_free_blocks+0x48/0x84 [nilfs2] Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c index 33400cf..7f65b3b 100644 --- a/fs/nilfs2/the_nilfs.c +++ b/fs/nilfs2/the_nilfs.c @@ -115,6 +115,7 @@ void put_nilfs(struct the_nilfs *nilfs) static int nilfs_load_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi, sector_t sr_block) { + static struct lock_class_key dat_lock_key; struct buffer_head *bh_sr; struct nilfs_super_root *raw_sr; struct nilfs_super_block **sbp = nilfs->ns_sbp; @@ -163,6 +164,9 @@ static int nilfs_load_super_root(struct the_nilfs *nilfs, if (unlikely(err)) goto failed_sufile; + lockdep_set_class(&NILFS_MDT(nilfs->ns_dat)->mi_sem, &dat_lock_key); + lockdep_set_class(&NILFS_MDT(nilfs->ns_gc_dat)->mi_sem, &dat_lock_key); + nilfs_mdt_set_shadow(nilfs->ns_dat, nilfs->ns_gc_dat); nilfs_mdt_set_entry_size(nilfs->ns_cpfile, checkpoint_size, sizeof(struct nilfs_cpfile_header)); -- cgit v0.10.2 From e7a7402c0d392dcadc74cae8922f8fae4667605a Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Fri, 27 Mar 2009 10:49:11 +0900 Subject: nilfs2: remove module version A MODULE_VERSION() macro has been used in out-of-tree nilfs modules, but it's needless and not updated in tree. So, this removes it along with the version declaration. Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h index 7558c97..3d0c18a 100644 --- a/fs/nilfs2/nilfs.h +++ b/fs/nilfs2/nilfs.h @@ -35,11 +35,6 @@ #include "bmap_union.h" /* - * NILFS filesystem version - */ -#define NILFS_VERSION "2.0.5" - -/* * nilfs inode data in memory */ struct nilfs_inode_info { diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c index 8a965f9..6989b03 100644 --- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -63,7 +63,6 @@ MODULE_AUTHOR("NTT Corp."); MODULE_DESCRIPTION("A New Implementation of the Log-structured Filesystem " "(NILFS)"); -MODULE_VERSION(NILFS_VERSION); MODULE_LICENSE("GPL"); static int nilfs_remount(struct super_block *sb, int *flags, char *data); -- cgit v0.10.2 From 3efb55b496952e0d29a9ec66d0ceaab175c4e8ca Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 30 Mar 2009 00:50:19 +0900 Subject: nilfs2: simplify handling of active state of segments fix This fixes a bug of ("nilfs2: simplify handling of active state of segments") patch. The patch did not take account that a base index is increased in nilfs_sufile_get_suinfo() function if requested entries go across block boundary on sufile. Due to this bug, the active flag sometimes appears on wrong segments and has induced malfunction of garbage collection. Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c index c774cf3..1ef2b4d 100644 --- a/fs/nilfs2/sufile.c +++ b/fs/nilfs2/sufile.c @@ -625,7 +625,7 @@ ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum, si[i + j].sui_nblocks = le32_to_cpu(su->su_nblocks); si[i + j].sui_flags = le32_to_cpu(su->su_flags) & ~(1UL << NILFS_SEGMENT_USAGE_ACTIVE); - if (nilfs_segment_is_active(nilfs, segnum + i + j)) + if (nilfs_segment_is_active(nilfs, segnum + j)) si[i + j].sui_flags |= (1UL << NILFS_SEGMENT_USAGE_ACTIVE); } -- cgit v0.10.2 From 88072faf9a32c92f37c15065496bb6eb309aebe3 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 5 Apr 2009 15:03:16 +0900 Subject: nilfs2: fix wrong accounting and duplicate brelse in nilfs_sufile_set_error The nilfs_sufile_set_error() function wrongly adjusts the number of dirty segments instead of the number of clean segments. In addition, the function calls brelse() twice for the same buffer head. This fixes these bugs. Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c index 1ef2b4d..8b2f93c 100644 --- a/fs/nilfs2/sufile.c +++ b/fs/nilfs2/sufile.c @@ -523,7 +523,7 @@ int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum) struct nilfs_segment_usage *su; struct nilfs_sufile_header *header; void *kaddr; - int ret; + int suclean, ret; if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) { printk(KERN_WARNING "%s: invalid segment number: %llu\n", @@ -546,16 +546,19 @@ int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum) brelse(su_bh); goto out_header; } + suclean = nilfs_segment_usage_clean(su); nilfs_segment_usage_set_error(su); kunmap_atomic(kaddr, KM_USER0); - brelse(su_bh); - kaddr = kmap_atomic(header_bh->b_page, KM_USER0); - header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr); - le64_add_cpu(&header->sh_ndirtysegs, -1); - kunmap_atomic(kaddr, KM_USER0); - nilfs_mdt_mark_buffer_dirty(header_bh); + if (suclean) { + kaddr = kmap_atomic(header_bh->b_page, KM_USER0); + header = nilfs_sufile_block_get_header(sufile, header_bh, + kaddr); + le64_add_cpu(&header->sh_ncleansegs, -1); + kunmap_atomic(kaddr, KM_USER0); + nilfs_mdt_mark_buffer_dirty(header_bh); + } nilfs_mdt_mark_buffer_dirty(su_bh); nilfs_mdt_mark_dirty(sufile); brelse(su_bh); -- cgit v0.10.2 From a703018f7bbec8109419318f5d51f235fdce5155 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 5 Apr 2009 18:24:11 +0900 Subject: nilfs2: segment usage file cleanups This will simplify sufile.c by sharing common code which repeatedly appears in routines updating a segment usage entry; a wrapper function nilfs_sufile_update() is introduced for the purpose, and counter modifications are integrated to a new function nilfs_sufile_mod_counter(). This is a preparation for the successive bugfix patch ("nilfs2: fix possible mismatch of sufile counters on recovery"). Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c index 8b2f93c..07013f5 100644 --- a/fs/nilfs2/sufile.c +++ b/fs/nilfs2/sufile.c @@ -93,6 +93,52 @@ nilfs_sufile_get_segment_usage_block(struct inode *sufile, __u64 segnum, create, NULL, bhp); } +static void nilfs_sufile_mod_counter(struct buffer_head *header_bh, + u64 ncleanadd, u64 ndirtyadd) +{ + struct nilfs_sufile_header *header; + void *kaddr; + + kaddr = kmap_atomic(header_bh->b_page, KM_USER0); + header = kaddr + bh_offset(header_bh); + le64_add_cpu(&header->sh_ncleansegs, ncleanadd); + le64_add_cpu(&header->sh_ndirtysegs, ndirtyadd); + kunmap_atomic(kaddr, KM_USER0); + + nilfs_mdt_mark_buffer_dirty(header_bh); +} + +int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create, + void (*dofunc)(struct inode *, __u64, + struct buffer_head *, + struct buffer_head *)) +{ + struct buffer_head *header_bh, *bh; + int ret; + + if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) { + printk(KERN_WARNING "%s: invalid segment number: %llu\n", + __func__, (unsigned long long)segnum); + return -EINVAL; + } + down_write(&NILFS_MDT(sufile)->mi_sem); + + ret = nilfs_sufile_get_header_block(sufile, &header_bh); + if (ret < 0) + goto out_sem; + + ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, create, &bh); + if (!ret) { + dofunc(sufile, segnum, header_bh, bh); + brelse(bh); + } + brelse(header_bh); + + out_sem: + up_write(&NILFS_MDT(sufile)->mi_sem); + return ret; +} + /** * nilfs_sufile_alloc - allocate a segment * @sufile: inode of segment usage file @@ -113,7 +159,6 @@ nilfs_sufile_get_segment_usage_block(struct inode *sufile, __u64 segnum, int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump) { struct buffer_head *header_bh, *su_bh; - struct the_nilfs *nilfs; struct nilfs_sufile_header *header; struct nilfs_segment_usage *su; size_t susz = NILFS_MDT(sufile)->mi_entry_size; @@ -124,8 +169,6 @@ int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump) down_write(&NILFS_MDT(sufile)->mi_sem); - nilfs = NILFS_MDT(sufile)->mi_nilfs; - ret = nilfs_sufile_get_header_block(sufile, &header_bh); if (ret < 0) goto out_sem; @@ -192,165 +235,55 @@ int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump) return ret; } -/** - * nilfs_sufile_cancel_free - - * @sufile: inode of segment usage file - * @segnum: segment number - * - * Description: - * - * Return Value: On success, 0 is returned. On error, one of the following - * negative error codes is returned. - * - * %-EIO - I/O error. - * - * %-ENOMEM - Insufficient amount of memory available. - */ -int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum) +void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum, + struct buffer_head *header_bh, + struct buffer_head *su_bh) { - struct buffer_head *header_bh, *su_bh; - struct the_nilfs *nilfs; - struct nilfs_sufile_header *header; struct nilfs_segment_usage *su; void *kaddr; - int ret; - - down_write(&NILFS_MDT(sufile)->mi_sem); - - nilfs = NILFS_MDT(sufile)->mi_nilfs; - - ret = nilfs_sufile_get_header_block(sufile, &header_bh); - if (ret < 0) - goto out_sem; - - ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh); - if (ret < 0) - goto out_header; kaddr = kmap_atomic(su_bh->b_page, KM_USER0); - su = nilfs_sufile_block_get_segment_usage( - sufile, segnum, su_bh, kaddr); + su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr); if (unlikely(!nilfs_segment_usage_clean(su))) { printk(KERN_WARNING "%s: segment %llu must be clean\n", __func__, (unsigned long long)segnum); kunmap_atomic(kaddr, KM_USER0); - goto out_su_bh; + return; } nilfs_segment_usage_set_dirty(su); kunmap_atomic(kaddr, KM_USER0); - kaddr = kmap_atomic(header_bh->b_page, KM_USER0); - header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr); - le64_add_cpu(&header->sh_ncleansegs, -1); - le64_add_cpu(&header->sh_ndirtysegs, 1); - kunmap_atomic(kaddr, KM_USER0); - - nilfs_mdt_mark_buffer_dirty(header_bh); + nilfs_sufile_mod_counter(header_bh, -1, 1); nilfs_mdt_mark_buffer_dirty(su_bh); nilfs_mdt_mark_dirty(sufile); - - out_su_bh: - brelse(su_bh); - out_header: - brelse(header_bh); - out_sem: - up_write(&NILFS_MDT(sufile)->mi_sem); - return ret; } -/** - * nilfs_sufile_freev - free segments - * @sufile: inode of segment usage file - * @segnum: array of segment numbers - * @nsegs: number of segments - * - * Description: nilfs_sufile_freev() frees segments specified by @segnum and - * @nsegs, which must have been returned by a previous call to - * nilfs_sufile_alloc(). - * - * Return Value: On success, 0 is returned. On error, one of the following - * negative error codes is returned. - * - * %-EIO - I/O error. - * - * %-ENOMEM - Insufficient amount of memory available. - */ -#define NILFS_SUFILE_FREEV_PREALLOC 16 -int nilfs_sufile_freev(struct inode *sufile, __u64 *segnum, size_t nsegs) +void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum, + struct buffer_head *header_bh, + struct buffer_head *su_bh) { - struct buffer_head *header_bh, **su_bh, - *su_bh_prealloc[NILFS_SUFILE_FREEV_PREALLOC]; - struct the_nilfs *nilfs; - struct nilfs_sufile_header *header; struct nilfs_segment_usage *su; void *kaddr; - int ret, i; + int sudirty; - down_write(&NILFS_MDT(sufile)->mi_sem); - - nilfs = NILFS_MDT(sufile)->mi_nilfs; - - /* prepare resources */ - if (nsegs <= NILFS_SUFILE_FREEV_PREALLOC) - su_bh = su_bh_prealloc; - else { - su_bh = kmalloc(sizeof(*su_bh) * nsegs, GFP_NOFS); - if (su_bh == NULL) { - ret = -ENOMEM; - goto out_sem; - } - } - - ret = nilfs_sufile_get_header_block(sufile, &header_bh); - if (ret < 0) - goto out_su_bh; - for (i = 0; i < nsegs; i++) { - ret = nilfs_sufile_get_segment_usage_block(sufile, segnum[i], - 0, &su_bh[i]); - if (ret < 0) - goto out_bh; - } - - /* free segments */ - for (i = 0; i < nsegs; i++) { - kaddr = kmap_atomic(su_bh[i]->b_page, KM_USER0); - su = nilfs_sufile_block_get_segment_usage( - sufile, segnum[i], su_bh[i], kaddr); - WARN_ON(nilfs_segment_usage_error(su)); - nilfs_segment_usage_set_clean(su); + kaddr = kmap_atomic(su_bh->b_page, KM_USER0); + su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr); + if (nilfs_segment_usage_clean(su)) { + printk(KERN_WARNING "%s: segment %llu is already clean\n", + __func__, (unsigned long long)segnum); kunmap_atomic(kaddr, KM_USER0); - nilfs_mdt_mark_buffer_dirty(su_bh[i]); + return; } - kaddr = kmap_atomic(header_bh->b_page, KM_USER0); - header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr); - le64_add_cpu(&header->sh_ncleansegs, nsegs); - le64_add_cpu(&header->sh_ndirtysegs, -(u64)nsegs); - kunmap_atomic(kaddr, KM_USER0); - nilfs_mdt_mark_buffer_dirty(header_bh); - nilfs_mdt_mark_dirty(sufile); - - out_bh: - for (i--; i >= 0; i--) - brelse(su_bh[i]); - brelse(header_bh); + WARN_ON(nilfs_segment_usage_error(su)); + WARN_ON(!nilfs_segment_usage_dirty(su)); - out_su_bh: - if (su_bh != su_bh_prealloc) - kfree(su_bh); - - out_sem: - up_write(&NILFS_MDT(sufile)->mi_sem); - return ret; -} + sudirty = nilfs_segment_usage_dirty(su); + nilfs_segment_usage_set_clean(su); + kunmap_atomic(kaddr, KM_USER0); + nilfs_mdt_mark_buffer_dirty(su_bh); -/** - * nilfs_sufile_free - - * @sufile: - * @segnum: - */ -int nilfs_sufile_free(struct inode *sufile, __u64 segnum) -{ - return nilfs_sufile_freev(sufile, &segnum, 1); + nilfs_sufile_mod_counter(header_bh, 1, sudirty ? (u64)-1 : 0); + nilfs_mdt_mark_dirty(sufile); } /** @@ -500,75 +433,28 @@ int nilfs_sufile_get_ncleansegs(struct inode *sufile, unsigned long *nsegsp) return ret; } -/** - * nilfs_sufile_set_error - mark a segment as erroneous - * @sufile: inode of segment usage file - * @segnum: segment number - * - * Description: nilfs_sufile_set_error() marks the segment specified by - * @segnum as erroneous. The error segment will never be used again. - * - * Return Value: On success, 0 is returned. On error, one of the following - * negative error codes is returned. - * - * %-EIO - I/O error. - * - * %-ENOMEM - Insufficient amount of memory available. - * - * %-EINVAL - Invalid segment usage number. - */ -int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum) +void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum, + struct buffer_head *header_bh, + struct buffer_head *su_bh) { - struct buffer_head *header_bh, *su_bh; struct nilfs_segment_usage *su; - struct nilfs_sufile_header *header; void *kaddr; - int suclean, ret; - - if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) { - printk(KERN_WARNING "%s: invalid segment number: %llu\n", - __func__, (unsigned long long)segnum); - return -EINVAL; - } - down_write(&NILFS_MDT(sufile)->mi_sem); - - ret = nilfs_sufile_get_header_block(sufile, &header_bh); - if (ret < 0) - goto out_sem; - ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh); - if (ret < 0) - goto out_header; + int suclean; kaddr = kmap_atomic(su_bh->b_page, KM_USER0); su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr); if (nilfs_segment_usage_error(su)) { kunmap_atomic(kaddr, KM_USER0); - brelse(su_bh); - goto out_header; + return; } suclean = nilfs_segment_usage_clean(su); - nilfs_segment_usage_set_error(su); kunmap_atomic(kaddr, KM_USER0); - if (suclean) { - kaddr = kmap_atomic(header_bh->b_page, KM_USER0); - header = nilfs_sufile_block_get_header(sufile, header_bh, - kaddr); - le64_add_cpu(&header->sh_ncleansegs, -1); - kunmap_atomic(kaddr, KM_USER0); - nilfs_mdt_mark_buffer_dirty(header_bh); - } + if (suclean) + nilfs_sufile_mod_counter(header_bh, -1, 0); nilfs_mdt_mark_buffer_dirty(su_bh); nilfs_mdt_mark_dirty(sufile); - brelse(su_bh); - - out_header: - brelse(header_bh); - - out_sem: - up_write(&NILFS_MDT(sufile)->mi_sem); - return ret; } /** diff --git a/fs/nilfs2/sufile.h b/fs/nilfs2/sufile.h index d595f33..449a6e2 100644 --- a/fs/nilfs2/sufile.h +++ b/fs/nilfs2/sufile.h @@ -36,9 +36,6 @@ static inline unsigned long nilfs_sufile_get_nsegments(struct inode *sufile) } int nilfs_sufile_alloc(struct inode *, __u64 *); -int nilfs_sufile_cancel_free(struct inode *, __u64); -int nilfs_sufile_freev(struct inode *, __u64 *, size_t); -int nilfs_sufile_free(struct inode *, __u64); int nilfs_sufile_get_segment_usage(struct inode *, __u64, struct nilfs_segment_usage **, struct buffer_head **); @@ -46,9 +43,71 @@ void nilfs_sufile_put_segment_usage(struct inode *, __u64, struct buffer_head *); int nilfs_sufile_get_stat(struct inode *, struct nilfs_sustat *); int nilfs_sufile_get_ncleansegs(struct inode *, unsigned long *); -int nilfs_sufile_set_error(struct inode *, __u64); ssize_t nilfs_sufile_get_suinfo(struct inode *, __u64, struct nilfs_suinfo *, size_t); +int nilfs_sufile_update(struct inode *, __u64, int, + void (*dofunc)(struct inode *, __u64, + struct buffer_head *, + struct buffer_head *)); +void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *, + struct buffer_head *); +void nilfs_sufile_do_free(struct inode *, __u64, struct buffer_head *, + struct buffer_head *); +void nilfs_sufile_do_set_error(struct inode *, __u64, struct buffer_head *, + struct buffer_head *); + +/** + * nilfs_sufile_cancel_free - + * @sufile: inode of segment usage file + * @segnum: segment number + * + * Description: + * + * Return Value: On success, 0 is returned. On error, one of the following + * negative error codes is returned. + * + * %-EIO - I/O error. + * + * %-ENOMEM - Insufficient amount of memory available. + */ +static inline int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum) +{ + return nilfs_sufile_update(sufile, segnum, 0, + nilfs_sufile_do_cancel_free); +} + +/** + * nilfs_sufile_free - free segment + * @sufile: inode of segment usage file + * @segnum: segment number to be freed + */ +static inline int nilfs_sufile_free(struct inode *sufile, __u64 segnum) +{ + return nilfs_sufile_update(sufile, segnum, 0, nilfs_sufile_do_free); +} + +/** + * nilfs_sufile_set_error - mark a segment as erroneous + * @sufile: inode of segment usage file + * @segnum: segment number + * + * Description: nilfs_sufile_set_error() marks the segment specified by + * @segnum as erroneous. The error segment will never be used again. + * + * Return Value: On success, 0 is returned. On error, one of the following + * negative error codes is returned. + * + * %-EIO - I/O error. + * + * %-ENOMEM - Insufficient amount of memory available. + * + * %-EINVAL - Invalid segment usage number. + */ +static inline int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum) +{ + return nilfs_sufile_update(sufile, segnum, 0, + nilfs_sufile_do_set_error); +} #endif /* _NILFS_SUFILE_H */ -- cgit v0.10.2 From c85399c2da8b86de8f6877980294fa1a4a88a5a4 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 5 Apr 2009 18:30:58 +0900 Subject: nilfs2: fix possible mismatch of sufile counters on recovery On-disk counters ndirtysegs and ncleansegs of sufile, can go wrong after roll-forward recovery because nilfs_prepare_segment_for_recovery() function marks segments dirty without adjusting value of these counters. This fixes the problem by adding a function to sufile which does the operation adjusting the counters, and by letting the recovery function use it. Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c index 6ade096..4fc081e 100644 --- a/fs/nilfs2/recovery.c +++ b/fs/nilfs2/recovery.c @@ -413,7 +413,6 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs, struct nilfs_segment_entry *ent, *n; struct inode *sufile = nilfs->ns_sufile; __u64 segnum[4]; - time_t mtime; int err; int i; @@ -442,24 +441,13 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs, * Collecting segments written after the latest super root. * These are marked dirty to avoid being reallocated in the next write. */ - mtime = get_seconds(); list_for_each_entry_safe(ent, n, head, list) { - if (ent->segnum == segnum[0]) { - list_del(&ent->list); - nilfs_free_segment_entry(ent); - continue; - } - err = nilfs_open_segment_entry(ent, sufile); - if (unlikely(err)) - goto failed; - if (!nilfs_segment_usage_dirty(ent->raw_su)) { - /* make the segment garbage */ - ent->raw_su->su_nblocks = cpu_to_le32(0); - ent->raw_su->su_lastmod = cpu_to_le32(mtime); - nilfs_segment_usage_set_dirty(ent->raw_su); + if (ent->segnum != segnum[0]) { + err = nilfs_sufile_scrap(sufile, ent->segnum); + if (unlikely(err)) + goto failed; } list_del(&ent->list); - nilfs_close_segment_entry(ent, sufile); nilfs_free_segment_entry(ent); } diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c index 07013f5..98e6867 100644 --- a/fs/nilfs2/sufile.c +++ b/fs/nilfs2/sufile.c @@ -258,6 +258,35 @@ void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum, nilfs_mdt_mark_dirty(sufile); } +void nilfs_sufile_do_scrap(struct inode *sufile, __u64 segnum, + struct buffer_head *header_bh, + struct buffer_head *su_bh) +{ + struct nilfs_segment_usage *su; + void *kaddr; + int clean, dirty; + + kaddr = kmap_atomic(su_bh->b_page, KM_USER0); + su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr); + if (su->su_flags == cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY) && + su->su_nblocks == cpu_to_le32(0)) { + kunmap_atomic(kaddr, KM_USER0); + return; + } + clean = nilfs_segment_usage_clean(su); + dirty = nilfs_segment_usage_dirty(su); + + /* make the segment garbage */ + su->su_lastmod = cpu_to_le64(0); + su->su_nblocks = cpu_to_le32(0); + su->su_flags = cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY); + kunmap_atomic(kaddr, KM_USER0); + + nilfs_sufile_mod_counter(header_bh, clean ? (u64)-1 : 0, dirty ? 0 : 1); + nilfs_mdt_mark_buffer_dirty(su_bh); + nilfs_mdt_mark_dirty(sufile); +} + void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum, struct buffer_head *header_bh, struct buffer_head *su_bh) diff --git a/fs/nilfs2/sufile.h b/fs/nilfs2/sufile.h index 449a6e2..a2e2efd 100644 --- a/fs/nilfs2/sufile.h +++ b/fs/nilfs2/sufile.h @@ -52,6 +52,8 @@ int nilfs_sufile_update(struct inode *, __u64, int, struct buffer_head *)); void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *, struct buffer_head *); +void nilfs_sufile_do_scrap(struct inode *, __u64, struct buffer_head *, + struct buffer_head *); void nilfs_sufile_do_free(struct inode *, __u64, struct buffer_head *, struct buffer_head *); void nilfs_sufile_do_set_error(struct inode *, __u64, struct buffer_head *, @@ -78,6 +80,16 @@ static inline int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum) } /** + * nilfs_sufile_scrap - make a segment garbage + * @sufile: inode of segment usage file + * @segnum: segment number to be freed + */ +static inline int nilfs_sufile_scrap(struct inode *sufile, __u64 segnum) +{ + return nilfs_sufile_update(sufile, segnum, 1, nilfs_sufile_do_scrap); +} + +/** * nilfs_sufile_free - free segment * @sufile: inode of segment usage file * @segnum: segment number to be freed -- cgit v0.10.2 From 2b2562d38130c769ee59948ba7e1f93d3787ca43 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Wed, 8 Apr 2009 22:48:03 -0300 Subject: [ARM] pxa: fix typo of cs_deassert() in pxa2xx-spi.c Signed-off-by: Daniel Ribeiro Signed-off-by: Eric Miao diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index c1688c7..c76feea 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -195,7 +195,7 @@ static void cs_deassert(struct driver_data *drv_data) struct chip_data *chip = drv_data->cur_chip; if (chip->cs_control) { - chip->cs_control(PXA2XX_CS_ASSERT); + chip->cs_control(PXA2XX_CS_DEASSERT); return; } -- cgit v0.10.2 From 918c71c0ff302637b745104e8ffe6142a64f514c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 10 Apr 2009 10:42:50 +0800 Subject: [ARM] pxa: add missing declaration of pxa26x_init_irq() Signed-off-by: Marek Vasut Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 3465268..485fede 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -15,6 +15,9 @@ extern struct sys_timer pxa_timer; extern void __init pxa_init_irq(int irq_nr, int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa25x_init_irq(void); +#ifdef CONFIG_CPU_PXA26x +extern void __init pxa26x_init_irq(void); +#endif extern void __init pxa27x_init_irq(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa_map_io(void); -- cgit v0.10.2 From efb12cd20ace78aca03304f356f9c9c0c9ca3f66 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 12 Apr 2009 16:37:23 +0200 Subject: [ARM] pxa: PalmTX and PalmT5 USB fixes Signed-off-by: Marek Vasut Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 052bfe7..d15662a 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -37,7 +37,6 @@ /* USB */ #define GPIO_NR_PALMT5_USB_DETECT_N 15 -#define GPIO_NR_PALMT5_USB_POWER 95 #define GPIO_NR_PALMT5_USB_PULLUP 93 /* LCD/BACKLIGHT */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 9f7d62f..e74082c 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -38,7 +38,6 @@ /* USB */ #define GPIO_NR_PALMTX_USB_DETECT_N 13 -#define GPIO_NR_PALMTX_USB_POWER 95 #define GPIO_NR_PALMTX_USB_PULLUP 93 /* LCD/BACKLIGHT */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 0680f1a..d7f8106 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -72,7 +73,7 @@ static unsigned long palmt5_pin_config[] __initdata = { /* USB */ GPIO15_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* MATRIX KEYPAD */ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, @@ -344,7 +345,7 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMT5_USB_POWER, + .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -490,9 +491,9 @@ static struct platform_device *devices[] __initdata = { /* setup udc GPIOs initial state */ static void __init palmt5_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1); - gpio_free(GPIO_NR_PALMT5_USB_POWER); + if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMT5_USB_PULLUP); } } diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 59d0c1c..14393d0 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -64,6 +64,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -75,7 +76,7 @@ static unsigned long palmtx_pin_config[] __initdata = { /* USB */ GPIO13_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* PCMCIA */ GPIO48_nPOE, @@ -359,7 +360,7 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMTX_USB_POWER, + .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -514,9 +515,9 @@ static void __init palmtx_map_io(void) /* setup udc GPIOs initial state */ static void __init palmtx_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1); - gpio_free(GPIO_NR_PALMTX_USB_POWER); + if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMTX_USB_PULLUP); } } -- cgit v0.10.2 From 5a31bec014449dc9ca994e4c1dbf2802b7ca458a Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Mon, 13 Apr 2009 00:11:30 -0700 Subject: Bonding: fix zero address hole bug in arp_ip_target list Fix a zero address hole bug in the bonding arp_ip_target list that was causing the bond to ignore ARP replies (bugz 13006). Instead of just setting the array entry to zero, we now copy any additional entries down one slot, putting the zero entry at the end. With this change we can now have all the loops that walk the array stop when they hit a zero since there will be no addresses after it. Changes are based in part on code fragment provided in kernel: bugzilla 13006: http://bugzilla.kernel.org/show_bug.cgi?id=13006 by Steve Howard Signed-off-by: Brian Haley Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 5ede747..0876275 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -1242,7 +1242,7 @@ monitoring is enabled, and vice-versa. To add ARP targets: # echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target # echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target - NOTE: up to 10 target addresses may be specified. + NOTE: up to 16 target addresses may be specified. To remove an ARP target: # echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 99610f3..63369b6 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2570,7 +2570,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { if (!targets[i]) - continue; + break; pr_debug("basa: target %x\n", targets[i]); if (list_empty(&bond->vlan_list)) { pr_debug("basa: empty vlan: arp_send\n"); @@ -2677,7 +2677,6 @@ static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 int i; __be32 *targets = bond->params.arp_targets; - targets = bond->params.arp_targets; for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) { pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n", &sip, &tip, i, &targets[i], bond_has_this_ip(bond, tip)); @@ -3303,7 +3302,7 @@ static void bond_info_show_master(struct seq_file *seq) for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) { if (!bond->params.arp_targets[i]) - continue; + break; if (printed) seq_printf(seq, ","); seq_printf(seq, " %pI4", &bond->params.arp_targets[i]); diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 18cf478..d287315 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -684,17 +684,15 @@ static ssize_t bonding_store_arp_targets(struct device *d, goto out; } /* look for an empty slot to put the target in, and check for dupes */ - for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) { if (targets[i] == newtarget) { /* duplicate */ printk(KERN_ERR DRV_NAME ": %s: ARP target %pI4 is already present\n", bond->dev->name, &newtarget); - if (done) - targets[i] = 0; ret = -EINVAL; goto out; } - if (targets[i] == 0 && !done) { + if (targets[i] == 0) { printk(KERN_INFO DRV_NAME ": %s: adding ARP target %pI4.\n", bond->dev->name, &newtarget); @@ -720,12 +718,16 @@ static ssize_t bonding_store_arp_targets(struct device *d, goto out; } - for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) { if (targets[i] == newtarget) { + int j; printk(KERN_INFO DRV_NAME ": %s: removing ARP target %pI4.\n", bond->dev->name, &newtarget); - targets[i] = 0; + for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++) + targets[j] = targets[j+1]; + + targets[j] = 0; done = 1; } } -- cgit v0.10.2 From f1c22943e92473903288ccab23debc9993c3a560 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 13 Apr 2009 04:09:34 -0400 Subject: [libata] sata_via: kill uninit'd var warning Reported and initial patch by Marin Mitov. Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 98e8c50..bdd43c7 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -566,7 +566,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; unsigned int i; int rc; - struct ata_host *host; + struct ata_host *host = NULL; int board_id = (int) ent->driver_data; const unsigned *bar_sizes; -- cgit v0.10.2 From aa431dd39d560586db22209b7f78c33455e1a786 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 8 Apr 2009 14:25:31 -0700 Subject: ahci: force CAP_NCQ for earlier NV MCPs Along with MCP65, MCP67 and 73 also don't set CAP_NCQ. Force it. Reported by zaceni@yandex.ru on bko#13014 and confirmed by Peer Chen. Signed-off-by: Tejun Heo Reported-by: NightFox Cc: Peer Chen Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 57be6be..08186ec 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -114,6 +114,7 @@ enum { board_ahci_sb700 = 5, /* for SB700 and SB800 */ board_ahci_mcp65 = 6, board_ahci_nopmp = 7, + board_ahci_yesncq = 8, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -469,6 +470,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_yesncq */ + { + AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -535,30 +544,30 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */ { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */ { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */ { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */ -- cgit v0.10.2 From f6005354d6d45afeafeca90661911d777c81f1e2 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Wed, 8 Apr 2009 18:19:39 +0200 Subject: ata: fix obviously wrong comment Also remove the now-useless debug printouts which are supposed to tell us when the scan starts and ends. Signed-off-by: Vegard Nossum Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e7ea77c..065507c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6110,13 +6110,11 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) ata_port_printk(ap, KERN_INFO, "DUMMY\n"); } - /* perform each probe synchronously */ - DPRINTK("probe begin\n"); + /* perform each probe asynchronously */ for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; async_schedule(async_port_probe, ap); } - DPRINTK("probe end\n"); return 0; } -- cgit v0.10.2 From fc3f55e672e1ed917dd9e215af81939cd3d717da Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 13 Apr 2009 06:40:04 +0000 Subject: sh: ap325: use edge control for ov772x camera Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 912458f..39e4691 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -349,6 +349,7 @@ static int ov7725_power(struct device *dev, int mode) static struct ov772x_camera_info ov7725_info = { .buswidth = SOCAM_DATAWIDTH_8, .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP, + .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0), .link = { .power = ov7725_power, }, -- cgit v0.10.2 From c454dee21d589476608957ca4f57feaabde62fab Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 13 Apr 2009 17:02:13 +0200 Subject: i2c-algo-pca: Fix use of uninitialized variable in debug message A recent change broke debugging of pca_xfer(), fix it. Reported-by: Geert Uytterhoeven Signed-off-by: Jean Delvare Acked-by: Wolfram Sang diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index f68e5f8..6318f7d 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -190,7 +190,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, int completed = 1; unsigned long timeout = jiffies + i2c_adap->timeout; - while (pca_status(adap) != 0xf8) { + while ((state = pca_status(adap)) != 0xf8) { if (time_before(jiffies, timeout)) { msleep(10); } else { -- cgit v0.10.2 From 3f307fb37a6dd65b7eabda9c6208a9bd161dc16e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 13 Apr 2009 17:02:13 +0200 Subject: i2c-voodoo3: Deprecate in favor of tdfxfb Support for I2C/DDC was recently added to the tdfxfb driver, which means that the i2c-voodoo3 driver can be deprecated. Signed-off-by: Jean Delvare Cc: Krzysztof Helt diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 7e2af10..de491a3 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -428,3 +428,12 @@ Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to After a reasonable transition period, we will remove the legacy fakephp interface. Who: Alex Chiang + +--------------------------- + +What: i2c-voodoo3 driver +When: October 2009 +Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate + driver but this caused driver conflicts. +Who: Jean Delvare + Krzysztof Helt diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 94eae5c..a48c8ae 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -604,12 +604,14 @@ comment "Graphics adapter I2C/DDC channel drivers" depends on PCI config I2C_VOODOO3 - tristate "Voodoo 3" + tristate "Voodoo 3 (DEPRECATED)" depends on PCI select I2C_ALGOBIT help If you say yes to this option, support will be included for the - Voodoo 3 I2C interface. + Voodoo 3 I2C interface. This driver is deprecated and you should + use the tdfxfb driver instead, which additionally provides + framebuffer support. This driver can also be built as a module. If so, the module will be called i2c-voodoo3. -- cgit v0.10.2 From c758e8cffe3b1bc7970d579371db01b19ff440bf Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Apr 2009 17:02:14 +0200 Subject: i2c: Fix sparse warnings for I2C_BOARD_INFO() Since the first argument to I2C_BOARD_INFO() must be a string constant, there is no need to parenthesise it, and adding parentheses results in an invalid initialiser for char[]. gcc obviously accepts this syntax as an extension, but sparse complains, e.g.: drivers/net/sfc/boards.c:173:2: warning: array initialized from parenthesized string constant Therefore, remove the parentheses. Signed-off-by: Ben Hutchings Signed-off-by: Jean Delvare diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 00ee11e..ad25805 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -274,7 +274,7 @@ struct i2c_board_info { * are provided using conventional syntax. */ #define I2C_BOARD_INFO(dev_type, dev_addr) \ - .type = (dev_type), .addr = (dev_addr) + .type = dev_type, .addr = (dev_addr) /* Add-on boards should register/unregister their devices; e.g. a board -- cgit v0.10.2 From 935298696f469c0e07c73be687bd055878074ce0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 13 Apr 2009 17:02:14 +0200 Subject: i2c: Let new-style drivers implement attach_adapter While it isn't the way the standard device binding model works, it is OK for new-style drivers to implement attach_adapter. It may help convert the renaming legacy drivers to new style drivers faster. Signed-off-by: Jean Delvare Cc: David Brownell diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b6f3a0d..85e2e919 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -716,8 +716,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) /* new style driver methods can't mix with legacy ones */ if (is_newstyle_driver(driver)) { - if (driver->attach_adapter || driver->detach_adapter - || driver->detach_client) { + if (driver->detach_adapter || driver->detach_client) { printk(KERN_WARNING "i2c-core: driver [%s] is confused\n", driver->driver.name); -- cgit v0.10.2 From 0ad30b8fd5fe798aae80df6344b415d8309342cc Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 13 Apr 2009 09:56:14 -0500 Subject: add some long-missing capabilities to fs_mask When POSIX capabilities were introduced during the 2.1 Linux cycle, the fs mask, which represents the capabilities which having fsuid==0 is supposed to grant, did not include CAP_MKNOD and CAP_LINUX_IMMUTABLE. However, before capabilities the privilege to call these did in fact depend upon fsuid==0. This patch introduces those capabilities into the fsmask, restoring the old behavior. See the thread starting at http://lkml.org/lkml/2009/3/11/157 for reference. Note that if this fix is deemed valid, then earlier kernel versions (2.4 and 2.2) ought to be fixed too. Changelog: [Mar 23] Actually delete old CAP_FS_SET definition... [Mar 20] Updated against J. Bruce Fields's patch Reported-by: Igor Zhbanov Signed-off-by: Serge E. Hallyn Cc: stable@kernel.org Cc: J. Bruce Fields Signed-off-by: Linus Torvalds diff --git a/include/linux/capability.h b/include/linux/capability.h index 4864a43..c302110 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -377,7 +377,21 @@ struct cpu_vfs_cap_data { #define CAP_FOR_EACH_U32(__capi) \ for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi) +/* + * CAP_FS_MASK and CAP_NFSD_MASKS: + * + * The fs mask is all the privileges that fsuid==0 historically meant. + * At one time in the past, that included CAP_MKNOD and CAP_LINUX_IMMUTABLE. + * + * It has never meant setting security.* and trusted.* xattrs. + * + * We could also define fsmask as follows: + * 1. CAP_FS_MASK is the privilege to bypass all fs-related DAC permissions + * 2. The security.* and trusted.* xattrs are fs-related MAC permissions + */ + # define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \ + | CAP_TO_MASK(CAP_MKNOD) \ | CAP_TO_MASK(CAP_DAC_OVERRIDE) \ | CAP_TO_MASK(CAP_DAC_READ_SEARCH) \ | CAP_TO_MASK(CAP_FOWNER) \ @@ -392,11 +406,12 @@ struct cpu_vfs_cap_data { # define CAP_EMPTY_SET ((kernel_cap_t){{ 0, 0 }}) # define CAP_FULL_SET ((kernel_cap_t){{ ~0, ~0 }}) # define CAP_INIT_EFF_SET ((kernel_cap_t){{ ~CAP_TO_MASK(CAP_SETPCAP), ~0 }}) -# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0, CAP_FS_MASK_B1 } }) +# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \ + | CAP_TO_MASK(CAP_LINUX_IMMUTABLE), \ + CAP_FS_MASK_B1 } }) # define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \ - | CAP_TO_MASK(CAP_SYS_RESOURCE) \ - | CAP_TO_MASK(CAP_MKNOD), \ - CAP_FS_MASK_B1 } }) + | CAP_TO_MASK(CAP_SYS_RESOURCE), \ + CAP_FS_MASK_B1 } }) #endif /* _KERNEL_CAPABILITY_U32S != 2 */ -- cgit v0.10.2 From 01599fca6758d2cd133e78f87426fc851c9ea725 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 13 Apr 2009 10:27:49 -0700 Subject: cpufreq: use smp_call_function_[single|many]() in acpi-cpufreq.c Atttempting to rid us of the problematic work_on_cpu(). Just use smp_call_fuction_single() here. This repairs a 10% sysbench(oltp)+mysql regression which Mike reported, due to commit 6b44003e5ca66a3fffeb5bc90f40ada2c4340896 Author: Andrew Morton Date: Thu Apr 9 09:50:37 2009 -0600 work_on_cpu(): rewrite it to create a kernel thread on demand It seems that the kernel calls these acpi-cpufreq functions at a quite high frequency. Valdis Kletnieks also reports that this causes 70-90 forks per second on his hardware. Cc: Valdis.Kletnieks@vt.edu Cc: Rusty Russell Cc: Venkatesh Pallipadi Cc: Len Brown Cc: Zhao Yakui Acked-by: Dave Jones Cc: Thomas Gleixner Tested-by: Mike Galbraith Cc: "Zhang, Yanmin" Signed-off-by: Andrew Morton Acked-by: Ingo Molnar [ Made it use smp_call_function_many() instead of looping over cpu's with smp_call_function_single() - Linus ] Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 9d3af38..3e3cd3d 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -153,7 +153,8 @@ struct drv_cmd { u32 val; }; -static long do_drv_read(void *_cmd) +/* Called via smp_call_function_single(), on the target CPU */ +static void do_drv_read(void *_cmd) { struct drv_cmd *cmd = _cmd; u32 h; @@ -170,10 +171,10 @@ static long do_drv_read(void *_cmd) default: break; } - return 0; } -static long do_drv_write(void *_cmd) +/* Called via smp_call_function_many(), on the target CPUs */ +static void do_drv_write(void *_cmd) { struct drv_cmd *cmd = _cmd; u32 lo, hi; @@ -192,23 +193,18 @@ static long do_drv_write(void *_cmd) default: break; } - return 0; } static void drv_read(struct drv_cmd *cmd) { cmd->val = 0; - work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd); + smp_call_function_single(cpumask_any(cmd->mask), do_drv_read, cmd, 1); } static void drv_write(struct drv_cmd *cmd) { - unsigned int i; - - for_each_cpu(i, cmd->mask) { - work_on_cpu(i, do_drv_write, cmd); - } + smp_call_function_many(cmd->mask, do_drv_write, cmd, 1); } static u32 get_cur_val(const struct cpumask *mask) @@ -252,15 +248,13 @@ struct perf_pair { } aperf, mperf; }; - -static long read_measured_perf_ctrs(void *_cur) +/* Called via smp_call_function_single(), on the target CPU */ +static void read_measured_perf_ctrs(void *_cur) { struct perf_pair *cur = _cur; rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi); rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi); - - return 0; } /* @@ -283,7 +277,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, unsigned int perf_percent; unsigned int retval; - if (!work_on_cpu(cpu, read_measured_perf_ctrs, &readin)) + if (smp_call_function_single(cpu, read_measured_perf_ctrs, &cur, 1)) return 0; cur.aperf.whole = readin.aperf.whole - -- cgit v0.10.2 From c751085943362143f84346d274e0011419c84202 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 12 Apr 2009 20:06:56 +0200 Subject: PM/Hibernate: Wait for SCSI devices scan to complete during resume There is a race between resume from hibernation and the asynchronous scanning of SCSI devices and to prevent it from happening we need to call scsi_complete_async_scans() during resume from hibernation. In addition, if the resume from hibernation is userland-driven, it's better to wait for all device probes in the kernel to complete before attempting to open the resume device. Signed-off-by: Rafael J. Wysocki Acked-by: Arjan van de Ven Signed-off-by: Linus Torvalds diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index e185090..fbc83be 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -38,9 +38,6 @@ static inline void scsi_log_completion(struct scsi_cmnd *cmd, int disposition) { }; #endif -/* scsi_scan.c */ -int scsi_complete_async_scans(void); - /* scsi_devinfo.c */ extern int scsi_get_device_flags(struct scsi_device *sdev, const unsigned char *vendor, diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c index 8a63610..2f21af2 100644 --- a/drivers/scsi/scsi_wait_scan.c +++ b/drivers/scsi/scsi_wait_scan.c @@ -11,7 +11,7 @@ */ #include -#include "scsi_priv.h" +#include static int __init wait_scan_init(void) { diff --git a/include/scsi/scsi_scan.h b/include/scsi/scsi_scan.h new file mode 100644 index 0000000..7889888 --- /dev/null +++ b/include/scsi/scsi_scan.h @@ -0,0 +1,11 @@ +#ifndef _SCSI_SCSI_SCAN_H +#define _SCSI_SCSI_SCAN_H + +#ifdef CONFIG_SCSI +/* drivers/scsi/scsi_scan.c */ +extern int scsi_complete_async_scans(void); +#else +static inline int scsi_complete_async_scans(void) { return 0; } +#endif + +#endif /* _SCSI_SCSI_SCAN_H */ diff --git a/kernel/power/disk.c b/kernel/power/disk.c index 5f21ab2..0854770 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include "power.h" @@ -645,6 +646,13 @@ static int software_resume(void) return 0; /* + * We can't depend on SCSI devices being available after loading one of + * their modules if scsi_complete_async_scans() is not called and the + * resume device usually is a SCSI one. + */ + scsi_complete_async_scans(); + + /* * name_to_dev_t() below takes a sysfs buffer mutex when sysfs * is configured into the kernel. Since the regular hibernate * trigger path is via sysfs which takes a buffer mutex before diff --git a/kernel/power/user.c b/kernel/power/user.c index 6c85359..ed97375 100644 --- a/kernel/power/user.c +++ b/kernel/power/user.c @@ -24,6 +24,7 @@ #include #include #include +#include #include @@ -92,6 +93,7 @@ static int snapshot_open(struct inode *inode, struct file *filp) filp->private_data = data; memset(&data->handle, 0, sizeof(struct snapshot_handle)); if ((filp->f_flags & O_ACCMODE) == O_RDONLY) { + /* Hibernating. The image device should be accessible. */ data->swap = swsusp_resume_device ? swap_type_of(swsusp_resume_device, 0, NULL) : -1; data->mode = O_RDONLY; @@ -99,6 +101,13 @@ static int snapshot_open(struct inode *inode, struct file *filp) if (error) pm_notifier_call_chain(PM_POST_HIBERNATION); } else { + /* + * Resuming. We may need to wait for the image device to + * appear. + */ + wait_for_device_probe(); + scsi_complete_async_scans(); + data->swap = -1; data->mode = O_WRONLY; error = pm_notifier_call_chain(PM_RESTORE_PREPARE); -- cgit v0.10.2 From 920e4ae31cb113328e617f4a0663fb17d7b09124 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 13 Apr 2009 20:45:42 +0200 Subject: [ALSA] intel8x0: an attempt to make ac97_clock measurement more reliable - use monotonic posix clock to measure time - try to avoid reading zero from PICB (position in current buffer) register - show also measured samples - when clock is near 41000 or 44100, use exactly these values (they appears to be reference clocks for hardware manufacturers) Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 5764881..c86ff49 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -2661,8 +2661,9 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) struct snd_pcm_substream *subs; struct ichdev *ichdev; unsigned long port; - unsigned long pos, t; - struct timeval start_time, stop_time; + unsigned long pos, pos1, t; + int civ, timeout = 1000; + struct timespec start_time, stop_time; if (chip->ac97_bus->clock != 48000) return; /* specified in module option */ @@ -2693,16 +2694,27 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) iputbyte(chip, port + ICH_REG_OFF_CR, ICH_IOCE); iputdword(chip, ICHREG(ALI_DMACR), 1 << ichdev->ali_slot); } - do_gettimeofday(&start_time); + do_posix_clock_monotonic_gettime(&start_time); spin_unlock_irq(&chip->reg_lock); msleep(50); spin_lock_irq(&chip->reg_lock); /* check the position */ + do { + civ = igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV); + pos1 = igetword(chip, ichdev->reg_offset + ichdev->roff_picb); + if (pos1 == 0) { + udelay(10); + continue; + } + if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) && + pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb)) + break; + } while (timeout--); pos = ichdev->fragsize1; - pos -= igetword(chip, ichdev->reg_offset + ichdev->roff_picb) << ichdev->pos_shift; + pos -= pos1 << ichdev->pos_shift; pos += ichdev->position; chip->in_measurement = 0; - do_gettimeofday(&stop_time); + do_posix_clock_monotonic_gettime(&stop_time); /* stop */ if (chip->device_type == DEVICE_ALI) { iputdword(chip, ICHREG(ALI_DMACR), 1 << (ichdev->ali_slot + 16)); @@ -2717,19 +2729,26 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS); spin_unlock_irq(&chip->reg_lock); + pos /= 4; t = stop_time.tv_sec - start_time.tv_sec; t *= 1000000; - t += stop_time.tv_usec - start_time.tv_usec; - printk(KERN_INFO "%s: measured %lu usecs\n", __func__, t); + t += (stop_time.tv_nsec - start_time.tv_nsec) / 1000; + printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos); if (t == 0) { - snd_printk(KERN_ERR "?? calculation error..\n"); + snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n"); return; } - pos = (pos / 4) * 1000; + pos *= 1000; pos = (pos / t) * 1000 + ((pos % t) * 1000) / t; if (pos < 40000 || pos >= 60000) /* abnormal value. hw problem? */ printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos); + else if (pos > 40500 || pos < 41500) + /* first exception - 41000Hz reference clock */ + chip->ac97_bus->clock = 41000; + else if (pos > 43600 || pos < 44600) + /* second exception - 44100HZ reference clock */ + chip->ac97_bus->clock = 44100; else if (pos < 47500 || pos > 48500) /* not 48000Hz, tuning the clock.. */ chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos; -- cgit v0.10.2 From da2436a23c038055b1da6fe30b6ea2886b1e07b0 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 13 Apr 2009 21:31:25 +0200 Subject: [ALSA] intel8x0: do not use zero value from PICB register It seems that the zero value from the PICB (position in current buffer) register is not reliable. Use jiffies to correct returned value from the ring buffer pointer callback. Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index c86ff49..6962f94 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -355,6 +355,9 @@ struct ichdev { unsigned int fragsize1; unsigned int position; unsigned int pos_shift; + unsigned int last_pos; + unsigned long last_pos_jiffies; + unsigned int jiffy_to_bytes; int frags; int lvi; int lvi_frag; @@ -838,7 +841,10 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd ichdev->suspended = 0; /* fallthru */ case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: val = ICH_IOCE | ICH_STARTBM; + ichdev->last_pos = ichdev->position; + ichdev->last_pos_jiffies = jiffies; break; case SNDRV_PCM_TRIGGER_SUSPEND: ichdev->suspended = 1; @@ -849,9 +855,6 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd case SNDRV_PCM_TRIGGER_PAUSE_PUSH: val = ICH_IOCE; break; - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - val = ICH_IOCE | ICH_STARTBM; - break; default: return -EINVAL; } @@ -1045,6 +1048,7 @@ static int snd_intel8x0_pcm_prepare(struct snd_pcm_substream *substream) ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1; } snd_intel8x0_setup_periods(chip, ichdev); + ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ; return 0; } @@ -1053,7 +1057,7 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs struct intel8x0 *chip = snd_pcm_substream_chip(substream); struct ichdev *ichdev = get_ichdev(substream); size_t ptr1, ptr; - int civ, timeout = 100; + int civ, timeout = 10; unsigned int position; spin_lock(&chip->reg_lock); @@ -1069,9 +1073,19 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb)) break; } while (timeout--); - ptr1 <<= ichdev->pos_shift; - ptr = ichdev->fragsize1 - ptr1; - ptr += position; + if (ptr1 != 0) { + ptr1 <<= ichdev->pos_shift; + ptr = ichdev->fragsize1 - ptr1; + ptr += position; + ichdev->last_pos = ptr; + ichdev->last_pos_jiffies = jiffies; + } else { + ptr1 = jiffies - ichdev->last_pos_jiffies; + if (ptr1) + ptr1 -= 1; + ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes; + ptr %= ichdev->size; + } spin_unlock(&chip->reg_lock); if (ptr >= ichdev->size) return 0; @@ -2710,9 +2724,13 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb)) break; } while (timeout--); - pos = ichdev->fragsize1; - pos -= pos1 << ichdev->pos_shift; - pos += ichdev->position; + if (pos1 == 0) { /* oops, this value is not reliable */ + pos = 0; + } else { + pos = ichdev->fragsize1; + pos -= pos1 << ichdev->pos_shift; + pos += ichdev->position; + } chip->in_measurement = 0; do_posix_clock_monotonic_gettime(&stop_time); /* stop */ @@ -2729,6 +2747,11 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS); spin_unlock_irq(&chip->reg_lock); + if (pos == 0) { + snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n"); + return; + } + pos /= 4; t = stop_time.tv_sec - start_time.tv_sec; t *= 1000000; -- cgit v0.10.2 From 0d489ffb76de0fe804cf06a9d4d11fa7342d74b9 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 13 Apr 2009 14:31:51 -0700 Subject: tg3: fix big endian MAC address collection failure We noticed on parisc that our broadcoms all swapped MAC addresses going from 2.6.29 to 2.6.30-rc1: Apr 11 07:48:24 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:30:6e:4b:15:59 Apr 13 07:34:34 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:00:59:15:4b:6e The problem patch is: commit 6d348f2c1e0bb1cf7a494b51fc921095ead3f6ae Author: Matt Carlson Date: Wed Feb 25 14:25:52 2009 +0000 tg3: Eliminate tg3_nvram_read_swab() With the root cause being the use of memcpy to set the mac address: memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2); memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo)); This might work on little endian machines, but it can't on big endian ones. You have to use the original setting mechanism to be correct on all architectures. The attached patch fixes parisc. Signed-off-by: James Bottomley Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6a736dd..7a837c4 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -12443,8 +12443,13 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) /* Next, try NVRAM. */ if (!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) && !tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) { - memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2); - memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo)); + dev->dev_addr[0] = ((hi >> 16) & 0xff); + dev->dev_addr[1] = ((hi >> 24) & 0xff); + dev->dev_addr[2] = ((lo >> 0) & 0xff); + dev->dev_addr[3] = ((lo >> 8) & 0xff); + dev->dev_addr[4] = ((lo >> 16) & 0xff); + dev->dev_addr[5] = ((lo >> 24) & 0xff); + } /* Finally just fetch it out of the MAC control regs. */ else { -- cgit v0.10.2 From 066069e14f6b4651293ae0865c121bcb2b360666 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 14 Apr 2009 06:32:08 +0900 Subject: MAINTAINERS: Update sh architecture file patterns. Fill in missing entries for drivers/sh/ and Documentation/sh/. Signed-off-by: Paul Mundt diff --git a/MAINTAINERS b/MAINTAINERS index ca2997a..597cd0c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5313,7 +5313,9 @@ L: linux-sh@vger.kernel.org W: http://www.linux-sh.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git S: Supported +F: Documentation/sh/ F: arch/sh/ +F: drivers/sh/ SUSPEND TO RAM P: Len Brown -- cgit v0.10.2 From a3d03ecaf9fe722bf96e4ef4a2f5e42ef652ddeb Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Mon, 13 Apr 2009 15:23:53 +0800 Subject: tracing: Fix power tracer header Before patch: # tracer: power # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | [ 676.875865889] CSTATE: Going to C1 on cpu 0 for 0.005911463 [ 676.882938805] CSTATE: Going to C1 on cpu 0 for 0.104796532 ... After patch: # tracer: power # # TIMESTAMP STATE EVENT # | | | [ 676.875865889] CSTATE: Going to C1 on cpu 0 for 0.005911463 [ 676.882938805] CSTATE: Going to C1 on cpu 0 for 0.104796532 ... v2: Use seq_puts instead of seq_printf Signed-off-by: Zhao Lei Cc: Arjan van de Ven Cc: Steven Rostedt Cc: Frederic Weisbecker Cc: Tom Zanussi LKML-Reference: <49E2E889.5000903@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c index bae791e..1184397 100644 --- a/kernel/trace/trace_power.c +++ b/kernel/trace/trace_power.c @@ -186,6 +186,12 @@ static enum print_line_t power_print_line(struct trace_iterator *iter) return TRACE_TYPE_UNHANDLED; } +static void power_print_header(struct seq_file *s) +{ + seq_puts(s, "# TIMESTAMP STATE EVENT\n"); + seq_puts(s, "# | | |\n"); +} + static struct tracer power_tracer __read_mostly = { .name = "power", @@ -194,6 +200,7 @@ static struct tracer power_tracer __read_mostly = .stop = stop_power_trace, .reset = power_trace_reset, .print_line = power_print_line, + .print_header = power_print_header, }; static int init_power_trace(void) -- cgit v0.10.2 From 140bc92903287cff4545e358c1651e4b7312cbd3 Mon Sep 17 00:00:00 2001 From: Sergei Poselenov Date: Tue, 7 Apr 2009 02:01:41 +0000 Subject: phylib: Basic support for the M88E1121R Marvell chip Add support for the Marvell M88E1121R Dual GigE PHY Signed-off-by: Yuri Tikhonov Signed-off-by: Sergei Poselenov Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index eb6411c..e9f436b 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -69,6 +69,11 @@ #define MII_M1111_COPPER 0 #define MII_M1111_FIBER 1 +#define MII_88E1121_PHY_LED_CTRL 16 +#define MII_88E1121_PHY_LED_PAGE 3 +#define MII_88E1121_PHY_LED_DEF 0x0030 +#define MII_88E1121_PHY_PAGE 22 + #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 #define MII_M1011_PHY_STATUS_100 0x4000 @@ -154,6 +159,30 @@ static int marvell_config_aneg(struct phy_device *phydev) return err; } +static int m88e1121_config_aneg(struct phy_device *phydev) +{ + int err, temp; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1011_PHY_SCR, + MII_M1011_PHY_SCR_AUTO_CROSS); + if (err < 0) + return err; + + temp = phy_read(phydev, MII_88E1121_PHY_PAGE); + + phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); + phy_write(phydev, MII_88E1121_PHY_PAGE, temp); + + err = genphy_config_aneg(phydev); + + return err; +} + static int m88e1111_config_init(struct phy_device *phydev) { int err; @@ -482,6 +511,18 @@ static struct phy_driver marvell_drivers[] = { .driver = {.owner = THIS_MODULE,}, }, { + .phy_id = 0x01410cb0, + .phy_id_mask = 0xfffffff0, + .name = "Marvell 88E1121R", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &m88e1121_config_aneg, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = { .owner = THIS_MODULE }, + }, + { .phy_id = 0x01410cd0, .phy_id_mask = 0xfffffff0, .name = "Marvell 88E1145", -- cgit v0.10.2 From a8729eb302a5b5da8b0b4d29582c42648a2e0f12 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 7 Apr 2009 02:01:42 +0000 Subject: phylib: Allow early-out in phy_change Marvell 88E1121R Dual PHY device can be hardware-configured to use shared interrupt pin for both PHY ports. For such PHY configurations using shared PHY interrupt phy_interrupt() handler will also schedule a work for PHY port which didn't cause an interrupt. This patch adds a possibility for PHY drivers to provide did_interrupt() function which reports if the PHY (or a PHY port in a multi-PHY device) generated an interrupt. This function is called in phy_change() as phy_change() shouldn't proceed if it is invoked for a PHY which didn't cause an interrupt. So check for interrupt originator in phy_change() to allow early-out. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 3ff1f42..e3b8932 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -655,6 +655,10 @@ static void phy_change(struct work_struct *work) struct phy_device *phydev = container_of(work, struct phy_device, phy_queue); + if (phydev->drv->did_interrupt && + !phydev->drv->did_interrupt(phydev)) + goto ignore; + err = phy_disable_interrupts(phydev); if (err) @@ -681,6 +685,11 @@ static void phy_change(struct work_struct *work) return; +ignore: + atomic_dec(&phydev->irq_disable); + enable_irq(phydev->irq); + return; + irq_enable_err: disable_irq(phydev->irq); atomic_inc(&phydev->irq_disable); diff --git a/include/linux/phy.h b/include/linux/phy.h index 32cf14a..97e40cb 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -388,6 +388,12 @@ struct phy_driver { /* Enables or disables interrupts */ int (*config_intr)(struct phy_device *phydev); + /* + * Checks if the PHY generated an interrupt. + * For multi-PHY devices with shared PHY interrupt pin + */ + int (*did_interrupt)(struct phy_device *phydev); + /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); -- cgit v0.10.2 From dcd07be3ffab7d20f4d498369e7526f6f4945257 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 7 Apr 2009 02:01:43 +0000 Subject: phylib: Add interrupt source check function to M88E1121R driver Add did_interrupt() function to check if a PHY port really caused an interrupt. This is needed in the case of shared PHY interrupt pin configuration to stop interrupt event processing for PHY ports which didn't cause an interrupt. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index e9f436b..7a3ec9d 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -458,6 +458,18 @@ static int marvell_read_status(struct phy_device *phydev) return 0; } +static int m88e1121_did_interrupt(struct phy_device *phydev) +{ + int imask; + + imask = phy_read(phydev, MII_M1011_IEVENT); + + if (imask & MII_M1011_IMASK_INIT) + return 1; + + return 0; +} + static struct phy_driver marvell_drivers[] = { { .phy_id = 0x01410c60, @@ -520,6 +532,7 @@ static struct phy_driver marvell_drivers[] = { .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .did_interrupt = &m88e1121_did_interrupt, .driver = { .owner = THIS_MODULE }, }, { -- cgit v0.10.2 From 4be6f6bb66111c9468733a4ed9cad10dc3a762c0 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 13 Apr 2009 14:39:33 -0700 Subject: mm: move the scan_unevictable_pages sysctl to the vm table vm knobs should go in the vm table. Probably too late for randomize_va_space though. Signed-off-by: Peter Zijlstra Acked-by: Lee Schermerhorn Acked-by: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 4286b62..e3d2c7d 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -902,16 +902,6 @@ static struct ctl_table kern_table[] = { .proc_handler = &proc_dointvec, }, #endif -#ifdef CONFIG_UNEVICTABLE_LRU - { - .ctl_name = CTL_UNNUMBERED, - .procname = "scan_unevictable_pages", - .data = &scan_unevictable_pages, - .maxlen = sizeof(scan_unevictable_pages), - .mode = 0644, - .proc_handler = &scan_unevictable_handler, - }, -#endif #ifdef CONFIG_SLOW_WORK { .ctl_name = CTL_UNNUMBERED, @@ -1302,6 +1292,16 @@ static struct ctl_table vm_table[] = { .extra2 = &one, }, #endif +#ifdef CONFIG_UNEVICTABLE_LRU + { + .ctl_name = CTL_UNNUMBERED, + .procname = "scan_unevictable_pages", + .data = &scan_unevictable_pages, + .maxlen = sizeof(scan_unevictable_pages), + .mode = 0644, + .proc_handler = &scan_unevictable_handler, + }, +#endif /* * NOTE: do not add new entries to this table unless you have read * Documentation/sysctl/ctl_unnumbered.txt -- cgit v0.10.2 From 510f32b308d121248ea2ccd1b241fed548993670 Mon Sep 17 00:00:00 2001 From: Jan Dumon Date: Mon, 13 Apr 2009 14:39:34 -0700 Subject: MAINTAINERS: switch maintainer of the hso driver Since Denis is no longer working for Option, I will maintain the driver from now on. Signed-off-by: Jan Dumon Cc: "David S. Miller" Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index ca2997a..1f0b14d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2592,8 +2592,8 @@ S: Maintained F: fs/hpfs/ HSO 3G MODEM DRIVER -P: Denis Joseph Barrow -M: d.barow@option.com +P: Jan Dumon +M: j.dumon@option.com W: http://www.pharscape.org S: Maintained F: drivers/net/usb/hso.c -- cgit v0.10.2 From f403bb802f634d5727e4d48a987ce02ef8dd8ce0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 13 Apr 2009 14:39:36 -0700 Subject: MAINTAINERS: fix Andreas's email address Correct typo in email address. Signed-off-by: Randy Dunlap Cc: Andreas Herrmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 1f0b14d..00ca615 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -461,7 +461,7 @@ F: arch/x86/include/asm/amd_iommu*.h AMD MICROCODE UPDATE SUPPORT P: Andreas Herrmann -M: andeas.herrmann3@amd.com +M: andreas.herrmann3@amd.com L: amd64-microcode@amd64.org S: Supported F: arch/x86/kernel/microcode_amd.c -- cgit v0.10.2 From ca8b9950298c84ca528a5943409a727c04ec88f8 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 13 Apr 2009 14:39:36 -0700 Subject: Documentation/sysctl/net.txt: fix a typo s/spicified/specified Signed-off-by: Li Zefan Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index a34d55b..df38ef0 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -95,7 +95,7 @@ of struct cmsghdr structures with appended data. There is only one file in this directory. unix_dgram_qlen limits the max number of datagrams queued in Unix domain -socket's buffer. It will not take effect unless PF_UNIX flag is spicified. +socket's buffer. It will not take effect unless PF_UNIX flag is specified. 3. /proc/sys/net/ipv4 - IPV4 settings -- cgit v0.10.2 From 2f6f6c6b5c4774cfdbe759eea1f5203a4b26fe6f Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Mon, 13 Apr 2009 14:39:37 -0700 Subject: hp_accel: remove unused #include Remove unused #include in drivers/hwmon/hp_accel.c. Signed-off-by: Huang Weiyi Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index 55d3dc5..abca7e9 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From b52bb3712a64c404846f30300b339cfd01e316be Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Mon, 13 Apr 2009 14:39:38 -0700 Subject: init/initramfs: fix warning with CONFIG_BLK_DEV_RAM=n init/initramfs.c:520: warning: 'clean_rootfs' defined but not used Signed-off-by: Nikanth Karthikesan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/init/initramfs.c b/init/initramfs.c index 80cd713..e44f2d9 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -515,6 +515,7 @@ skip: initrd_end = 0; } +#ifdef CONFIG_BLK_DEV_RAM #define BUF_SIZE 1024 static void __init clean_rootfs(void) { @@ -561,6 +562,7 @@ static void __init clean_rootfs(void) sys_close(fd); kfree(buf); } +#endif static int __init populate_rootfs(void) { -- cgit v0.10.2 From 513adb58685615b0b1d47a3f0d40f5352beff189 Mon Sep 17 00:00:00 2001 From: Andrea Righi Date: Mon, 13 Apr 2009 14:39:39 -0700 Subject: fbdev: fix info->lock deadlock in fbcon_event_notify() fb_notifier_call_chain() is called with info->lock held, i.e. in do_fb_ioctl() => FBIOPUT_VSCREENINFO => fb_set_var() and the some notifier callbacks, like fbcon_event_notify(), try to re-acquire info->lock again. Remove the lock/unlock_fb_info() in all the framebuffer notifier callbacks' and be sure to always call fb_notifier_call_chain() with info->lock held. Reported-by: Pavel Roskin Reported-by: Eric Miao Signed-off-by: Andrea Righi Cc: Stefan Richter Cc: Krzysztof Helt Cc: Geert Uytterhoeven Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index dd37cbc..157057c 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -35,8 +35,6 @@ static int fb_notifier_callback(struct notifier_block *self, return 0; bd = container_of(self, struct backlight_device, fb_notif); - if (!lock_fb_info(evdata->info)) - return -ENODEV; mutex_lock(&bd->ops_lock); if (bd->ops) if (!bd->ops->check_fb || @@ -49,7 +47,6 @@ static int fb_notifier_callback(struct notifier_block *self, backlight_update_status(bd); } mutex_unlock(&bd->ops_lock); - unlock_fb_info(evdata->info); return 0; } diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index 0bb13df..b644947 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -40,8 +40,6 @@ static int fb_notifier_callback(struct notifier_block *self, if (!ld->ops) return 0; - if (!lock_fb_info(evdata->info)) - return -ENODEV; mutex_lock(&ld->ops_lock); if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) { if (event == FB_EVENT_BLANK) { @@ -53,7 +51,6 @@ static int fb_notifier_callback(struct notifier_block *self, } } mutex_unlock(&ld->ops_lock); - unlock_fb_info(evdata->info); return 0; } diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 2cd500a..471a9a6 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2263,9 +2263,12 @@ static void fbcon_generic_blank(struct vc_data *vc, struct fb_info *info, } + if (!lock_fb_info(info)) + return; event.info = info; event.data = ␣ fb_notifier_call_chain(FB_EVENT_CONBLANK, &event); + unlock_fb_info(info); } static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) @@ -2956,8 +2959,6 @@ static int fbcon_fb_unregistered(struct fb_info *info) { int i, idx; - if (!lock_fb_info(info)) - return -ENODEV; idx = info->node; for (i = first_fb_vc; i <= last_fb_vc; i++) { if (con2fb_map[i] == idx) @@ -2985,8 +2986,6 @@ static int fbcon_fb_unregistered(struct fb_info *info) if (primary_device == idx) primary_device = -1; - unlock_fb_info(info); - if (!num_registered_fb) unregister_con_driver(&fb_con); @@ -3027,11 +3026,8 @@ static int fbcon_fb_registered(struct fb_info *info) { int ret = 0, i, idx; - if (!lock_fb_info(info)) - return -ENODEV; idx = info->node; fbcon_select_primary(info); - unlock_fb_info(info); if (info_idx == -1) { for (i = first_fb_vc; i <= last_fb_vc; i++) { @@ -3152,53 +3148,23 @@ static int fbcon_event_notify(struct notifier_block *self, switch(action) { case FB_EVENT_SUSPEND: - if (!lock_fb_info(info)) { - ret = -ENODEV; - goto done; - } fbcon_suspended(info); - unlock_fb_info(info); break; case FB_EVENT_RESUME: - if (!lock_fb_info(info)) { - ret = -ENODEV; - goto done; - } fbcon_resumed(info); - unlock_fb_info(info); break; case FB_EVENT_MODE_CHANGE: - if (!lock_fb_info(info)) { - ret = -ENODEV; - goto done; - } fbcon_modechanged(info); - unlock_fb_info(info); break; case FB_EVENT_MODE_CHANGE_ALL: - if (!lock_fb_info(info)) { - ret = -ENODEV; - goto done; - } fbcon_set_all_vcs(info); - unlock_fb_info(info); break; case FB_EVENT_MODE_DELETE: mode = event->data; - if (!lock_fb_info(info)) { - ret = -ENODEV; - goto done; - } ret = fbcon_mode_deleted(info, mode); - unlock_fb_info(info); break; case FB_EVENT_FB_UNBIND: - if (!lock_fb_info(info)) { - ret = -ENODEV; - goto done; - } idx = info->node; - unlock_fb_info(info); ret = fbcon_fb_unbind(idx); break; case FB_EVENT_FB_REGISTERED: @@ -3217,29 +3183,14 @@ static int fbcon_event_notify(struct notifier_block *self, con2fb->framebuffer = con2fb_map[con2fb->console - 1]; break; case FB_EVENT_BLANK: - if (!lock_fb_info(info)) { - ret = -ENODEV; - goto done; - } fbcon_fb_blanked(info, *(int *)event->data); - unlock_fb_info(info); break; case FB_EVENT_NEW_MODELIST: - if (!lock_fb_info(info)) { - ret = -ENODEV; - goto done; - } fbcon_new_modelist(info); - unlock_fb_info(info); break; case FB_EVENT_GET_REQ: caps = event->data; - if (!lock_fb_info(info)) { - ret = -ENODEV; - goto done; - } fbcon_get_requirement(info, caps); - unlock_fb_info(info); break; } done: diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 2ac32e6..d412a1d 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1097,8 +1097,11 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, return -EINVAL; con2fb.framebuffer = -1; event.data = &con2fb; + if (!lock_fb_info(info)) + return -ENODEV; event.info = info; fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event); + unlock_fb_info(info); ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0; break; case FBIOPUT_CON2FBMAP: @@ -1115,8 +1118,11 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, break; } event.data = &con2fb; + if (!lock_fb_info(info)) + return -ENODEV; event.info = info; ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event); + unlock_fb_info(info); break; case FBIOBLANK: if (!lock_fb_info(info)) @@ -1521,7 +1527,10 @@ register_framebuffer(struct fb_info *fb_info) registered_fb[i] = fb_info; event.info = fb_info; + if (!lock_fb_info(fb_info)) + return -ENODEV; fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event); + unlock_fb_info(fb_info); return 0; } @@ -1555,8 +1564,12 @@ unregister_framebuffer(struct fb_info *fb_info) goto done; } + + if (!lock_fb_info(fb_info)) + return -ENODEV; event.info = fb_info; ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event); + unlock_fb_info(fb_info); if (ret) { ret = -EINVAL; @@ -1590,6 +1603,8 @@ void fb_set_suspend(struct fb_info *info, int state) { struct fb_event event; + if (!lock_fb_info(info)) + return; event.info = info; if (state) { fb_notifier_call_chain(FB_EVENT_SUSPEND, &event); @@ -1598,6 +1613,7 @@ void fb_set_suspend(struct fb_info *info, int state) info->state = FBINFO_STATE_RUNNING; fb_notifier_call_chain(FB_EVENT_RESUME, &event); } + unlock_fb_info(info); } /** @@ -1667,8 +1683,11 @@ int fb_new_modelist(struct fb_info *info) err = 1; if (!list_empty(&info->modelist)) { + if (!lock_fb_info(info)) + return -ENODEV; event.info = info; err = fb_notifier_call_chain(FB_EVENT_NEW_MODELIST, &event); + unlock_fb_info(info); } return err; -- cgit v0.10.2 From ebde441177da3bad156701d351509f34295282ab Mon Sep 17 00:00:00 2001 From: Michal Januszewski Date: Mon, 13 Apr 2009 14:39:41 -0700 Subject: fbdev: fix color component field length documentation The documentation about the meaning of the color component bitfield lengths in pseudocolor modes is inconsistent. Fix it, so that it indicates the correct interpretation everywhere, i.e. that 1 << length is the number of palette entries. Signed-off-by: Michal Januszewski Acked-by: Krzysztof Helt Cc: Acked-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c index a439159..89158bc 100644 --- a/drivers/video/skeletonfb.c +++ b/drivers/video/skeletonfb.c @@ -308,9 +308,11 @@ static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green, * color depth = SUM(var->{color}.length) * * Pseudocolor: - * var->{color}.offset is 0 - * var->{color}.length contains width of DAC or the number of unique - * colors available (color depth) + * var->{color}.offset is 0 unless the palette index takes less than + * bits_per_pixel bits and is stored in the upper + * bits of the pixel value + * var->{color}.length is set so that 1 << length is the number of + * available palette entries * pseudo_palette is not used * RAMDAC[X] is programmed to (red, green, blue) * color depth = var->{color}.length diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c index cc919ae..050d432 100644 --- a/drivers/video/vfb.c +++ b/drivers/video/vfb.c @@ -318,13 +318,16 @@ static int vfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * {hardwarespecific} contains width of RAMDAC * cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset) * RAMDAC[X] is programmed to (red, green, blue) - * + * * Pseudocolor: - * uses offset = 0 && length = RAMDAC register width. - * var->{color}.offset is 0 - * var->{color}.length contains widht of DAC + * var->{color}.offset is 0 unless the palette index takes less than + * bits_per_pixel bits and is stored in the upper + * bits of the pixel value + * var->{color}.length is set so that 1 << length is the number of available + * palette entries * cmap is not used * RAMDAC[X] is programmed to (red, green, blue) + * * Truecolor: * does not use DAC. Usually 3 are present. * var->{color}.offset contains start of bitfield diff --git a/include/linux/fb.h b/include/linux/fb.h index f563c50..330c4b1 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -173,8 +173,12 @@ struct fb_fix_screeninfo { /* Interpretation of offset for color fields: All offsets are from the right, * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you * can use the offset as right argument to <<). A pixel afterwards is a bit - * stream and is written to video memory as that unmodified. This implies - * big-endian byte order if bits_per_pixel is greater than 8. + * stream and is written to video memory as that unmodified. + * + * For pseudocolor: offset and length should be the same for all color + * components. Offset specifies the position of the least significant bit + * of the pallette index in a pixel value. Length indicates the number + * of available palette entries (i.e. # of entries = 1 << length). */ struct fb_bitfield { __u32 offset; /* beginning of bitfield */ -- cgit v0.10.2 From 0ca1071f7dbd673de826eb3fb01bfdfd1d423433 Mon Sep 17 00:00:00 2001 From: Michal Januszewski Date: Mon, 13 Apr 2009 14:39:43 -0700 Subject: uvesafb: fix color component length for pseudocolor modes uvesafb incorrectly sets the length of the color fields to 6 bits for PSEUDOCOLOR modes, even though 8 bits are always used per pixel. Fix this by setting the length to 8. The switch of the DAC width from the default 6 bits to 8 bits is retained and tracked internally in the driver, but never exposed to userspace. Signed-off-by: Michal Januszewski Acked-by: Krzysztof Helt Cc: Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c index 0b370ae..421770b 100644 --- a/drivers/video/uvesafb.c +++ b/drivers/video/uvesafb.c @@ -55,6 +55,7 @@ static u16 maxvf __devinitdata; /* maximum vertical frequency */ static u16 maxhf __devinitdata; /* maximum horizontal frequency */ static u16 vbemode __devinitdata; /* force use of a specific VBE mode */ static char *mode_option __devinitdata; +static u8 dac_width = 6; static struct uvesafb_ktask *uvfb_tasks[UVESAFB_TASKS_MAX]; static DEFINE_MUTEX(uvfb_lock); @@ -303,22 +304,10 @@ static void uvesafb_setup_var(struct fb_var_screeninfo *var, var->blue.offset = 0; var->transp.offset = 0; - /* - * We're assuming that we can switch the DAC to 8 bits. If - * this proves to be incorrect, we'll update the fields - * later in set_par(). - */ - if (par->vbe_ib.capabilities & VBE_CAP_CAN_SWITCH_DAC) { - var->red.length = 8; - var->green.length = 8; - var->blue.length = 8; - var->transp.length = 0; - } else { - var->red.length = 6; - var->green.length = 6; - var->blue.length = 6; - var->transp.length = 0; - } + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; } } @@ -1006,7 +995,7 @@ static int uvesafb_setcolreg(unsigned regno, unsigned red, unsigned green, struct fb_info *info) { struct uvesafb_pal_entry entry; - int shift = 16 - info->var.green.length; + int shift = 16 - dac_width; int err = 0; if (regno >= info->cmap.len) @@ -1055,7 +1044,7 @@ static int uvesafb_setcolreg(unsigned regno, unsigned red, unsigned green, static int uvesafb_setcmap(struct fb_cmap *cmap, struct fb_info *info) { struct uvesafb_pal_entry *entries; - int shift = 16 - info->var.green.length; + int shift = 16 - dac_width; int i, err = 0; if (info->var.bits_per_pixel == 8) { @@ -1317,13 +1306,9 @@ setmode: err = uvesafb_exec(task); if (err || (task->t.regs.eax & 0xffff) != 0x004f || ((task->t.regs.ebx & 0xff00) >> 8) != 8) { - /* - * We've failed to set the DAC palette format - - * time to correct var. - */ - info->var.red.length = 6; - info->var.green.length = 6; - info->var.blue.length = 6; + dac_width = 6; + } else { + dac_width = 8; } } -- cgit v0.10.2 From 133bb070e94ab41d750c6f2160c8843e46f11b78 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Mon, 13 Apr 2009 14:39:44 -0700 Subject: efifb: exit if framebuffer address is invalid efifb will attempt to ioremap a framebuffer even if its starting address is 0, failing and causing an ugly backtrace in the process. Exit before probing if this is the case. Signed-off-by: Matthew Garrett Acked-by: Peter Jones Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c index 0c5b9a9..8dea2bc 100644 --- a/drivers/video/efifb.c +++ b/drivers/video/efifb.c @@ -210,12 +210,15 @@ static int __init efifb_probe(struct platform_device *dev) unsigned int size_total; int request_succeeded = 0; - printk(KERN_INFO "efifb: probing for efifb\n"); - if (!screen_info.lfb_depth) screen_info.lfb_depth = 32; if (!screen_info.pages) screen_info.pages = 1; + if (!screen_info.lfb_base) { + printk(KERN_DEBUG "efifb: invalid framebuffer address\n"); + return -ENODEV; + } + printk(KERN_INFO "efifb: probing for efifb\n"); /* just assume they're all unset if any are */ if (!screen_info.blue_size) { -- cgit v0.10.2 From 251eb40f5ccd07a905633a816fbf8f2b6b25cced Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Mon, 13 Apr 2009 14:39:45 -0700 Subject: hwmon: sht15 humidity sensor driver Data sheet at: http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf These sensors communicate over a 2 wire bus running a device specific protocol. The complexity of the driver is mainly due to handling the substantial delays between requesting a reading and the device pulling the data line low to indicate that the data is available. This is handled by an interrupt that is disabled under all other conditions. I wasn't terribly clear on the best way to handle this, so comments on that aspect would be particularly welcome! Interpretation of the temperature depends on knowing the supply voltage. If configured in a board config as a regulator consumer this is obtained from the regulator subsystem. If not it should be provided in the platform data. I've placed this driver in the hwmon subsystem as it is definitely a device that may be used for hardware monitoring and with it's relatively slow response times (up to 120 millisecs to get a reading) a caching strategy certainly seems to make sense! Signed-off-by: Jonathan Cameron Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0e8a918..d73f5f4 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -692,6 +692,16 @@ config SENSORS_PCF8591 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. +config SENSORS_SHT15 + tristate "Sensiron humidity and temperature sensors. SHT15 and compat." + depends on GENERIC_GPIO + help + If you say yes here you get support for the Sensiron SHT10, SHT11, + SHT15, SHT71, SHT75 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht15. + config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 1d37578..0ae2698 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o +obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c new file mode 100644 index 0000000..6cbdc2f --- /dev/null +++ b/drivers/hwmon/sht15.c @@ -0,0 +1,692 @@ +/* + * sht15.c - support for the SHT15 Temperature and Humidity Sensor + * + * Copyright (c) 2009 Jonathan Cameron + * + * Copyright (c) 2007 Wouter Horre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Currently ignoring checksum on readings. + * Default resolution only (14bit temp, 12bit humidity) + * Ignoring battery status. + * Heater not enabled. + * Timings are all conservative. + * + * Data sheet available (1/2009) at + * http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf + * + * Regulator supply name = vcc + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SHT15_MEASURE_TEMP 3 +#define SHT15_MEASURE_RH 5 + +#define SHT15_READING_NOTHING 0 +#define SHT15_READING_TEMP 1 +#define SHT15_READING_HUMID 2 + +/* Min timings in nsecs */ +#define SHT15_TSCKL 100 /* clock low */ +#define SHT15_TSCKH 100 /* clock high */ +#define SHT15_TSU 150 /* data setup time */ + +/** + * struct sht15_temppair - elements of voltage dependant temp calc + * @vdd: supply voltage in microvolts + * @d1: see data sheet + */ +struct sht15_temppair { + int vdd; /* microvolts */ + int d1; +}; + +/* Table 9 from data sheet - relates temperature calculation + * to supply voltage. + */ +static const struct sht15_temppair temppoints[] = { + { 2500000, -39400 }, + { 3000000, -39600 }, + { 3500000, -39700 }, + { 4000000, -39800 }, + { 5000000, -40100 }, +}; + +/** + * struct sht15_data - device instance specific data + * @pdata: platform data (gpio's etc) + * @read_work: bh of interrupt handler + * @wait_queue: wait queue for getting values from device + * @val_temp: last temperature value read from device + * @val_humid: last humidity value read from device + * @flag: status flag used to identify what the last request was + * @valid: are the current stored values valid (start condition) + * @last_updat: time of last update + * @read_lock: mutex to ensure only one read in progress + * at a time. + * @dev: associate device structure + * @hwmon_dev: device associated with hwmon subsystem + * @reg: associated regulator (if specified) + * @nb: notifier block to handle notifications of voltage changes + * @supply_uV: local copy of supply voltage used to allow + * use of regulator consumer if available + * @supply_uV_valid: indicates that an updated value has not yet + * been obtained from the regulator and so any calculations + * based upon it will be invalid. + * @update_supply_work: work struct that is used to update the supply_uV + * @interrupt_handled: flag used to indicate a hander has been scheduled + */ +struct sht15_data { + struct sht15_platform_data *pdata; + struct work_struct read_work; + wait_queue_head_t wait_queue; + uint16_t val_temp; + uint16_t val_humid; + u8 flag; + u8 valid; + unsigned long last_updat; + struct mutex read_lock; + struct device *dev; + struct device *hwmon_dev; + struct regulator *reg; + struct notifier_block nb; + int supply_uV; + int supply_uV_valid; + struct work_struct update_supply_work; + atomic_t interrupt_handled; +}; + +/** + * sht15_connection_reset() - reset the comms interface + * @data: sht15 specific data + * + * This implements section 3.4 of the data sheet + */ +static void sht15_connection_reset(struct sht15_data *data) +{ + int i; + gpio_direction_output(data->pdata->gpio_data, 1); + ndelay(SHT15_TSCKL); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + for (i = 0; i < 9; ++i) { + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + } +} +/** + * sht15_send_bit() - send an individual bit to the device + * @data: device state data + * @val: value of bit to be sent + **/ +static inline void sht15_send_bit(struct sht15_data *data, int val) +{ + + gpio_set_value(data->pdata->gpio_data, val); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); /* clock low time */ +} + +/** + * sht15_transmission_start() - specific sequence for new transmission + * + * @data: device state data + * Timings for this are not documented on the data sheet, so very + * conservative ones used in implementation. This implements + * figure 12 on the data sheet. + **/ +static void sht15_transmission_start(struct sht15_data *data) +{ + /* ensure data is high and output */ + gpio_direction_output(data->pdata->gpio_data, 1); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_data, 0); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_data, 1); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); +} +/** + * sht15_send_byte() - send a single byte to the device + * @data: device state + * @byte: value to be sent + **/ +static void sht15_send_byte(struct sht15_data *data, u8 byte) +{ + int i; + for (i = 0; i < 8; i++) { + sht15_send_bit(data, !!(byte & 0x80)); + byte <<= 1; + } +} +/** + * sht15_wait_for_response() - checks for ack from device + * @data: device state + **/ +static int sht15_wait_for_response(struct sht15_data *data) +{ + gpio_direction_input(data->pdata->gpio_data); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + if (gpio_get_value(data->pdata->gpio_data)) { + gpio_set_value(data->pdata->gpio_sck, 0); + dev_err(data->dev, "Command not acknowledged\n"); + sht15_connection_reset(data); + return -EIO; + } + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + return 0; +} + +/** + * sht15_send_cmd() - Sends a command to the device. + * @data: device state + * @cmd: command byte to be sent + * + * On entry, sck is output low, data is output pull high + * and the interrupt disabled. + **/ +static int sht15_send_cmd(struct sht15_data *data, u8 cmd) +{ + int ret = 0; + sht15_transmission_start(data); + sht15_send_byte(data, cmd); + ret = sht15_wait_for_response(data); + return ret; +} +/** + * sht15_update_single_val() - get a new value from device + * @data: device instance specific data + * @command: command sent to request value + * @timeout_msecs: timeout after which comms are assumed + * to have failed are reset. + **/ +static inline int sht15_update_single_val(struct sht15_data *data, + int command, + int timeout_msecs) +{ + int ret; + ret = sht15_send_cmd(data, command); + if (ret) + return ret; + + gpio_direction_input(data->pdata->gpio_data); + atomic_set(&data->interrupt_handled, 0); + + enable_irq(gpio_to_irq(data->pdata->gpio_data)); + if (gpio_get_value(data->pdata->gpio_data) == 0) { + disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data)); + /* Only relevant if the interrupt hasn't occured. */ + if (!atomic_read(&data->interrupt_handled)) + schedule_work(&data->read_work); + } + ret = wait_event_timeout(data->wait_queue, + (data->flag == SHT15_READING_NOTHING), + msecs_to_jiffies(timeout_msecs)); + if (ret == 0) {/* timeout occurred */ + disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));; + sht15_connection_reset(data); + return -ETIME; + } + return 0; +} + +/** + * sht15_update_vals() - get updated readings from device if too old + * @data: device state + **/ +static int sht15_update_vals(struct sht15_data *data) +{ + int ret = 0; + int timeout = HZ; + + mutex_lock(&data->read_lock); + if (time_after(jiffies, data->last_updat + timeout) + || !data->valid) { + data->flag = SHT15_READING_HUMID; + ret = sht15_update_single_val(data, SHT15_MEASURE_RH, 160); + if (ret) + goto error_ret; + data->flag = SHT15_READING_TEMP; + ret = sht15_update_single_val(data, SHT15_MEASURE_TEMP, 400); + if (ret) + goto error_ret; + data->valid = 1; + data->last_updat = jiffies; + } +error_ret: + mutex_unlock(&data->read_lock); + + return ret; +} + +/** + * sht15_calc_temp() - convert the raw reading to a temperature + * @data: device state + * + * As per section 4.3 of the data sheet. + **/ +static inline int sht15_calc_temp(struct sht15_data *data) +{ + int d1 = 0; + int i; + + for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++) + /* Find pointer to interpolate */ + if (data->supply_uV > temppoints[i - 1].vdd) { + d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd) + * (temppoints[i].d1 - temppoints[i - 1].d1) + / (temppoints[i].vdd - temppoints[i - 1].vdd) + + temppoints[i - 1].d1; + break; + } + + return data->val_temp*10 + d1; +} + +/** + * sht15_calc_humid() - using last temperature convert raw to humid + * @data: device state + * + * This is the temperature compensated version as per section 4.2 of + * the data sheet. + **/ +static inline int sht15_calc_humid(struct sht15_data *data) +{ + int RHlinear; /* milli percent */ + int temp = sht15_calc_temp(data); + + const int c1 = -4; + const int c2 = 40500; /* x 10 ^ -6 */ + const int c3 = 2800; /* x10 ^ -9 */ + + RHlinear = c1*1000 + + c2 * data->val_humid/1000 + + (data->val_humid * data->val_humid * c3)/1000000; + return (temp - 25000) * (10000 + 800 * data->val_humid) + / 1000000 + RHlinear; +} + +static ssize_t sht15_show_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + struct sht15_data *data = dev_get_drvdata(dev); + + /* Technically no need to read humidity as well */ + ret = sht15_update_vals(data); + + return ret ? ret : sprintf(buf, "%d\n", + sht15_calc_temp(data)); +} + +static ssize_t sht15_show_humidity(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + struct sht15_data *data = dev_get_drvdata(dev); + + ret = sht15_update_vals(data); + + return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data)); + +}; +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + return sprintf(buf, "%s\n", pdev->name); +} + +static SENSOR_DEVICE_ATTR(temp1_input, + S_IRUGO, sht15_show_temp, + NULL, 0); +static SENSOR_DEVICE_ATTR(humidity1_input, + S_IRUGO, sht15_show_humidity, + NULL, 0); +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); +static struct attribute *sht15_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_humidity1_input.dev_attr.attr, + &dev_attr_name.attr, + NULL, +}; + +static const struct attribute_group sht15_attr_group = { + .attrs = sht15_attrs, +}; + +static irqreturn_t sht15_interrupt_fired(int irq, void *d) +{ + struct sht15_data *data = d; + /* First disable the interrupt */ + disable_irq_nosync(irq); + atomic_inc(&data->interrupt_handled); + /* Then schedule a reading work struct */ + if (data->flag != SHT15_READING_NOTHING) + schedule_work(&data->read_work); + return IRQ_HANDLED; +} + +/* Each byte of data is acknowledged by pulling the data line + * low for one clock pulse. + */ +static void sht15_ack(struct sht15_data *data) +{ + gpio_direction_output(data->pdata->gpio_data, 0); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_data, 1); + + gpio_direction_input(data->pdata->gpio_data); +} +/** + * sht15_end_transmission() - notify device of end of transmission + * @data: device state + * + * This is basically a NAK. (single clock pulse, data high) + **/ +static void sht15_end_transmission(struct sht15_data *data) +{ + gpio_direction_output(data->pdata->gpio_data, 1); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); +} + +static void sht15_bh_read_data(struct work_struct *work_s) +{ + int i; + uint16_t val = 0; + struct sht15_data *data + = container_of(work_s, struct sht15_data, + read_work); + /* Firstly, verify the line is low */ + if (gpio_get_value(data->pdata->gpio_data)) { + /* If not, then start the interrupt again - care + here as could have gone low in meantime so verify + it hasn't! + */ + atomic_set(&data->interrupt_handled, 0); + enable_irq(gpio_to_irq(data->pdata->gpio_data)); + /* If still not occured or another handler has been scheduled */ + if (gpio_get_value(data->pdata->gpio_data) + || atomic_read(&data->interrupt_handled)) + return; + } + /* Read the data back from the device */ + for (i = 0; i < 16; ++i) { + val <<= 1; + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + val |= !!gpio_get_value(data->pdata->gpio_data); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + if (i == 7) + sht15_ack(data); + } + /* Tell the device we are done */ + sht15_end_transmission(data); + + switch (data->flag) { + case SHT15_READING_TEMP: + data->val_temp = val; + break; + case SHT15_READING_HUMID: + data->val_humid = val; + break; + } + + data->flag = SHT15_READING_NOTHING; + wake_up(&data->wait_queue); +} + +static void sht15_update_voltage(struct work_struct *work_s) +{ + struct sht15_data *data + = container_of(work_s, struct sht15_data, + update_supply_work); + data->supply_uV = regulator_get_voltage(data->reg); +} + +/** + * sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg + * @nb: associated notification structure + * @event: voltage regulator state change event code + * @ignored: function parameter - ignored here + * + * Note that as the notification code holds the regulator lock, we have + * to schedule an update of the supply voltage rather than getting it directly. + **/ +static int sht15_invalidate_voltage(struct notifier_block *nb, + unsigned long event, + void *ignored) +{ + struct sht15_data *data = container_of(nb, struct sht15_data, nb); + + if (event == REGULATOR_EVENT_VOLTAGE_CHANGE) + data->supply_uV_valid = false; + schedule_work(&data->update_supply_work); + + return NOTIFY_OK; +} + +static int __devinit sht15_probe(struct platform_device *pdev) +{ + int ret = 0; + struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL); + + if (!data) { + ret = -ENOMEM; + dev_err(&pdev->dev, "kzalloc failed"); + goto error_ret; + } + + INIT_WORK(&data->read_work, sht15_bh_read_data); + INIT_WORK(&data->update_supply_work, sht15_update_voltage); + platform_set_drvdata(pdev, data); + mutex_init(&data->read_lock); + data->dev = &pdev->dev; + init_waitqueue_head(&data->wait_queue); + + if (pdev->dev.platform_data == NULL) { + dev_err(&pdev->dev, "no platform data supplied"); + goto err_free_data; + } + data->pdata = pdev->dev.platform_data; + data->supply_uV = data->pdata->supply_mv*1000; + +/* If a regulator is available, query what the supply voltage actually is!*/ + data->reg = regulator_get(data->dev, "vcc"); + if (!IS_ERR(data->reg)) { + data->supply_uV = regulator_get_voltage(data->reg); + regulator_enable(data->reg); + /* setup a notifier block to update this if another device + * causes the voltage to change */ + data->nb.notifier_call = &sht15_invalidate_voltage; + ret = regulator_register_notifier(data->reg, &data->nb); + } +/* Try requesting the GPIOs */ + ret = gpio_request(data->pdata->gpio_sck, "SHT15 sck"); + if (ret) { + dev_err(&pdev->dev, "gpio request failed"); + goto err_free_data; + } + gpio_direction_output(data->pdata->gpio_sck, 0); + ret = gpio_request(data->pdata->gpio_data, "SHT15 data"); + if (ret) { + dev_err(&pdev->dev, "gpio request failed"); + goto err_release_gpio_sck; + } + ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group); + if (ret) { + dev_err(&pdev->dev, "sysfs create failed"); + goto err_free_data; + } + + ret = request_irq(gpio_to_irq(data->pdata->gpio_data), + sht15_interrupt_fired, + IRQF_TRIGGER_FALLING, + "sht15 data", + data); + if (ret) { + dev_err(&pdev->dev, "failed to get irq for data line"); + goto err_release_gpio_data; + } + disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data)); + sht15_connection_reset(data); + sht15_send_cmd(data, 0x1E); + + data->hwmon_dev = hwmon_device_register(data->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto err_release_gpio_data; + } + return 0; + +err_release_gpio_data: + gpio_free(data->pdata->gpio_data); +err_release_gpio_sck: + gpio_free(data->pdata->gpio_sck); +err_free_data: + kfree(data); +error_ret: + + return ret; +} + +static int __devexit sht15_remove(struct platform_device *pdev) +{ + struct sht15_data *data = platform_get_drvdata(pdev); + + /* Make sure any reads from the device are done and + * prevent new ones beginnning */ + mutex_lock(&data->read_lock); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group); + if (!IS_ERR(data->reg)) { + regulator_unregister_notifier(data->reg, &data->nb); + regulator_disable(data->reg); + regulator_put(data->reg); + } + + free_irq(gpio_to_irq(data->pdata->gpio_data), data); + gpio_free(data->pdata->gpio_data); + gpio_free(data->pdata->gpio_sck); + mutex_unlock(&data->read_lock); + kfree(data); + return 0; +} + + +static struct platform_driver sht_drivers[] = { + { + .driver = { + .name = "sht10", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, { + .driver = { + .name = "sht11", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, { + .driver = { + .name = "sht15", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, { + .driver = { + .name = "sht71", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, { + .driver = { + .name = "sht75", + .owner = THIS_MODULE, + }, + .probe = sht15_probe, + .remove = sht15_remove, + }, +}; + + +static int __init sht15_init(void) +{ + int ret; + int i; + + for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) { + ret = platform_driver_register(&sht_drivers[i]); + if (ret) + goto error_unreg; + } + + return 0; + +error_unreg: + while (--i >= 0) + platform_driver_unregister(&sht_drivers[i]); + + return ret; +} +module_init(sht15_init); + +static void __exit sht15_exit(void) +{ + int i; + for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--) + platform_driver_unregister(&sht_drivers[i]); +} +module_exit(sht15_exit); + +MODULE_LICENSE("GPL"); diff --git a/include/linux/sht15.h b/include/linux/sht15.h new file mode 100644 index 0000000..046bce0 --- /dev/null +++ b/include/linux/sht15.h @@ -0,0 +1,24 @@ +/* + * sht15.h - support for the SHT15 Temperature and Humidity Sensor + * + * Copyright (c) 2009 Jonathan Cameron + * + * Copyright (c) 2007 Wouter Horre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/** + * struct sht15_platform_data - sht15 connectivity info + * @gpio_data: no. of gpio to which bidirectional data line is connected + * @gpio_sck: no. of gpio to which the data clock is connected. + * @supply_mv: supply voltage in mv. Overridden by regulator if available. + **/ +struct sht15_platform_data { + int gpio_data; + int gpio_sck; + int supply_mv; +}; + -- cgit v0.10.2 From eb2e5f452a1456c7a20f7566a24d5a8f6ef3edd5 Mon Sep 17 00:00:00 2001 From: Dave Anderson Date: Mon, 13 Apr 2009 14:39:46 -0700 Subject: hfs: fix memory leak when unmounting When an HFS filesystem is unmounted, it leaks a 2-page bitmap. Also, under extreme memory pressure, it's possible that hfs_releasepage() may use a tree pointer that has not been initialized, and if so, the release request should just be rejected. [akpm@linux-foundation.org: free_pages(0) is legal, remove obvious comment] Signed-off-by: Dave Anderson Tested-by: Eugene Teo Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c index 9435dda..a1cbff2 100644 --- a/fs/hfs/inode.c +++ b/fs/hfs/inode.c @@ -70,6 +70,10 @@ static int hfs_releasepage(struct page *page, gfp_t mask) BUG(); return 0; } + + if (!tree) + return 0; + if (tree->node_size >= PAGE_CACHE_SIZE) { nidx = page->index >> (tree->node_size_shift - PAGE_CACHE_SHIFT); spin_lock(&tree->hash_lock); diff --git a/fs/hfs/mdb.c b/fs/hfs/mdb.c index 36ca2e1..7b6165f 100644 --- a/fs/hfs/mdb.c +++ b/fs/hfs/mdb.c @@ -349,6 +349,7 @@ void hfs_mdb_put(struct super_block *sb) if (HFS_SB(sb)->nls_disk) unload_nls(HFS_SB(sb)->nls_disk); + free_pages((unsigned long)HFS_SB(sb)->bitmap, PAGE_SIZE < 8192 ? 1 : 0); kfree(HFS_SB(sb)); sb->s_fs_info = NULL; } -- cgit v0.10.2 From 17a5138d204014b00cb9c1d6e8ff311993041b5c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 13 Apr 2009 14:39:47 -0700 Subject: aio: remove INIT_KIOCTX Unused after 20dcae32439384b6863c626bb3b2a09bed65b33e aka "[PATCH] aio: remove kioctx from mm_struct". Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/init_task.h b/include/linux/init_task.h index dcfb933..d87247d 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -15,19 +15,6 @@ extern struct files_struct init_files; extern struct fs_struct init_fs; -#define INIT_KIOCTX(name, which_mm) \ -{ \ - .users = ATOMIC_INIT(1), \ - .dead = 0, \ - .mm = &which_mm, \ - .user_id = 0, \ - .next = NULL, \ - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \ - .ctx_lock = __SPIN_LOCK_UNLOCKED(name.ctx_lock), \ - .reqs_active = 0U, \ - .max_reqs = ~0U, \ -} - #define INIT_MM(name) \ { \ .mm_rb = RB_ROOT, \ -- cgit v0.10.2 From f26ec5baa67524b00311b8ec4626efc0a95925e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 13 Apr 2009 14:39:48 -0700 Subject: namespaces: move get_mq() inside #ifdef CONFIG_SYSCTL | ipc/mq_sysctl.c:26: warning: 'get_mq' defined but not used Signed-off-by: Geert Uytterhoeven Acked-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/ipc/mq_sysctl.c b/ipc/mq_sysctl.c index 89f60ec..24ae46d 100644 --- a/ipc/mq_sysctl.c +++ b/ipc/mq_sysctl.c @@ -22,6 +22,7 @@ #define MIN_MSGSIZEMAX 128 /* min value for msgsize_max */ #define MAX_MSGSIZEMAX (8192*128) /* max value for msgsize_max */ +#ifdef CONFIG_PROC_SYSCTL static void *get_mq(ctl_table *table) { char *which = table->data; @@ -30,7 +31,6 @@ static void *get_mq(ctl_table *table) return which; } -#ifdef CONFIG_PROC_SYSCTL static int proc_mq_dointvec(ctl_table *table, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos) { -- cgit v0.10.2 From c26d7b29d9989cfd9004e688ad517925b0db37d0 Mon Sep 17 00:00:00 2001 From: Michal Januszewski Date: Mon, 13 Apr 2009 14:39:49 -0700 Subject: s3fb: fix color component length for pseudocolor modes s3fb incorrectly sets the length of the color fields to 6 bits for PSEUDOCOLOR modes, even though 8 or 4 bits are used per pixel. Fix this by setting the length to 8 or 4, respectively. Signed-off-by: Michal Januszewski Acked-by: Ondrej Zajicek Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c index 4dcec48..c3fad34 100644 --- a/drivers/video/s3fb.c +++ b/drivers/video/s3fb.c @@ -45,11 +45,11 @@ struct s3fb_info { static const struct svga_fb_format s3fb_formats[] = { { 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16}, - { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, + { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 0, FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16}, - { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 1, + { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 1, FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16}, - { 8, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, + { 8, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8}, {16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0, FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4}, -- cgit v0.10.2 From 0a4534801468325fdb6a7b7bf73ad2a958a1e379 Mon Sep 17 00:00:00 2001 From: Michal Januszewski Date: Mon, 13 Apr 2009 14:39:51 -0700 Subject: sa1100fb: fix color component length for pseudocolor modes sa1100fb incorrectly sets the length of the color fields to 8 bits for PSEUDOCOLOR modes for which only 4 bits are used per pixel. Fix this by setting the length to 4 bits for these modes. Signed-off-by: Michal Januszewski Cc: Krzysztof Helt Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index fad58cf..10ddad8 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -199,16 +199,20 @@ extern void (*sa1100fb_backlight_power)(int on); extern void (*sa1100fb_lcd_power)(int on); -/* - * IMHO this looks wrong. In 8BPP, length should be 8. - */ -static struct sa1100fb_rgb rgb_8 = { +static struct sa1100fb_rgb rgb_4 = { .red = { .offset = 0, .length = 4, }, .green = { .offset = 0, .length = 4, }, .blue = { .offset = 0, .length = 4, }, .transp = { .offset = 0, .length = 0, }, }; +static struct sa1100fb_rgb rgb_8 = { + .red = { .offset = 0, .length = 8, }, + .green = { .offset = 0, .length = 8, }, + .blue = { .offset = 0, .length = 8, }, + .transp = { .offset = 0, .length = 0, }, +}; + static struct sa1100fb_rgb def_rgb_16 = { .red = { .offset = 11, .length = 5, }, .green = { .offset = 5, .length = 6, }, @@ -613,7 +617,7 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel); switch (var->bits_per_pixel) { case 4: - rgbidx = RGB_8; + rgbidx = RGB_4; break; case 8: rgbidx = RGB_8; @@ -1382,6 +1386,7 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) fbi->fb.monspecs = monspecs; fbi->fb.pseudo_palette = (fbi + 1); + fbi->rgb[RGB_4] = &rgb_4; fbi->rgb[RGB_8] = &rgb_8; fbi->rgb[RGB_16] = &def_rgb_16; diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h index 86831db..1c3b459 100644 --- a/drivers/video/sa1100fb.h +++ b/drivers/video/sa1100fb.h @@ -57,9 +57,10 @@ struct sa1100fb_lcd_reg { unsigned long lccr3; }; -#define RGB_8 (0) -#define RGB_16 (1) -#define NR_RGB 2 +#define RGB_4 (0) +#define RGB_8 (1) +#define RGB_16 (2) +#define NR_RGB 3 struct sa1100fb_info { struct fb_info fb; -- cgit v0.10.2 From 811a201374b10d60662504f9ea533e03914fdb27 Mon Sep 17 00:00:00 2001 From: Michal Januszewski Date: Mon, 13 Apr 2009 14:39:52 -0700 Subject: sisfb: fix color component length for pseudocolor modes sisfb incorrectly sets the length of the color fields to 6 bits for PSEUDOCOLOR modes, even though 8 bits are always used per pixel. Fix this by setting the length to 8. Signed-off-by: Michal Januszewski Cc: Thomas Winischhofer Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 346d645..7e17ee9 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -1129,7 +1129,7 @@ sisfb_bpp_to_var(struct sis_video_info *ivideo, struct fb_var_screeninfo *var) switch(var->bits_per_pixel) { case 8: var->red.offset = var->green.offset = var->blue.offset = 0; - var->red.length = var->green.length = var->blue.length = 6; + var->red.length = var->green.length = var->blue.length = 8; break; case 16: var->red.offset = 11; -- cgit v0.10.2 From 3e6210195c4e1157159779b7c700ba76f4546421 Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Mon, 13 Apr 2009 14:39:53 -0700 Subject: drivers/video/aty/radeon_base.c: fix typo in comment Signed-off-by: Paul Menzel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 16bb7e3..6c37e8e 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -698,8 +698,8 @@ static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo) found: /* * Some methods fail to retrieve SCLK and MCLK values, we apply default - * settings in this case (200Mhz). If that really happne often, we could - * fetch from registers instead... + * settings in this case (200Mhz). If that really happens often, we + * could fetch from registers instead... */ if (rinfo->pll.mclk == 0) rinfo->pll.mclk = 20000; -- cgit v0.10.2 From 5dec8bfbdd4921522565a7b0e0c8760ae042ef6d Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 13 Apr 2009 14:39:54 -0700 Subject: include/linux/fiemap.h: include types.h now that it's exported Include in fiemap.h. Sam Ravnborg pointed out that this was missing in this newly-exported header which uses the __u32 and __u64 types. Signed-off-by: Eric Sandeen Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h index 671decb..934e22d 100644 --- a/include/linux/fiemap.h +++ b/include/linux/fiemap.h @@ -11,6 +11,8 @@ #ifndef _LINUX_FIEMAP_H #define _LINUX_FIEMAP_H +#include + struct fiemap_extent { __u64 fe_logical; /* logical offset in bytes for the start of * the extent from the beginning of the file */ -- cgit v0.10.2 From 697f619fc87aa9bf5b6c8c756f7ea54e950d5cd5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 13 Apr 2009 14:39:54 -0700 Subject: filemap: fix kernel-doc warnings Fix filemap.c kernel-doc warnings: Warning(mm/filemap.c:575): No description found for parameter 'page' Warning(mm/filemap.c:575): No description found for parameter 'waiter' Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/filemap.c b/mm/filemap.c index 2e2d38e..8bd4980 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -567,8 +567,8 @@ EXPORT_SYMBOL(wait_on_page_bit); /** * add_page_wait_queue - Add an arbitrary waiter to a page's wait queue - * @page - Page defining the wait queue of interest - * @waiter - Waiter to add to the queue + * @page: Page defining the wait queue of interest + * @waiter: Waiter to add to the queue * * Add an arbitrary @waiter to the wait queue for the nominated @page. */ -- cgit v0.10.2 From 0efb2a03af7eddadb4d0db5f855b1614ba9b0a00 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Mon, 13 Apr 2009 14:39:55 -0700 Subject: cirrusfb: do not allow unsupported pixel depth Do not allow modes with unsupported pixel depth. Otherwise, one can hang a computer by setting incorrect value with fbset command. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index d42e385..4c2bf92 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -567,9 +567,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var, default: dev_dbg(info->device, "Unsupported bpp size: %d\n", var->bits_per_pixel); - assert(false); - /* should never occur */ - break; + return -EINVAL; } if (var->xres_virtual < var->xres) -- cgit v0.10.2 From 0769c2981495c3d05429840d6fc7a1b5e26accaa Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 13 Apr 2009 14:39:56 -0700 Subject: asm-generic/siginfo.h: update NSIGTRAP definition Impact: (nearly) trivial The patch commit da654b74bda14c45a7d98c731bf3c1a43b6b74e2 Author: Srinivasa Ds Date: Tue Sep 23 15:23:52 2008 +0530 signals: demultiplexing SIGTRAP signal forgot to update the NSIGTRAP define in asm-generic/siginfo.h to the new number of sigtrap subcodes. Nothing in the tree seems to use it, but presumably something in user space might. So update it. Cc: Srinivasa Ds Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h index 35752da..c840719 100644 --- a/include/asm-generic/siginfo.h +++ b/include/asm-generic/siginfo.h @@ -201,7 +201,7 @@ typedef struct siginfo { #define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */ #define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */ #define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint/watchpoint */ -#define NSIGTRAP 2 +#define NSIGTRAP 4 /* * SIGCHLD si_codes -- cgit v0.10.2 From bdff549ebeff92b1a6952e5501caf16a6f8898c8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 13 Apr 2009 14:39:57 -0700 Subject: spi: spi_write_then_read() bugfixes The "simplify spi_write_then_read()" patch included two regressions from the 2.6.27 behaviors: - The data it wrote out during the (full duplex) read side of the transfer was not zeroed. - It fails completely on half duplex hardware, such as Microwire and most "3-wire" SPI variants. So, revert that patch. A revised version should be submitted at some point, which can get the speedup on standard hardware (full duplex) without breaking on less-capable half-duplex stuff. Signed-off-by: David Brownell Cc: [2.6.28.x, 2.6.29.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 643908b..8eba98c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -658,7 +658,7 @@ int spi_write_then_read(struct spi_device *spi, int status; struct spi_message message; - struct spi_transfer x; + struct spi_transfer x[2]; u8 *local_buf; /* Use preallocated DMA-safe buffer. We can't avoid copying here, @@ -669,9 +669,15 @@ int spi_write_then_read(struct spi_device *spi, return -EINVAL; spi_message_init(&message); - memset(&x, 0, sizeof x); - x.len = n_tx + n_rx; - spi_message_add_tail(&x, &message); + memset(x, 0, sizeof x); + if (n_tx) { + x[0].len = n_tx; + spi_message_add_tail(&x[0], &message); + } + if (n_rx) { + x[1].len = n_rx; + spi_message_add_tail(&x[1], &message); + } /* ... unless someone else is using the pre-allocated buffer */ if (!mutex_trylock(&lock)) { @@ -682,15 +688,15 @@ int spi_write_then_read(struct spi_device *spi, local_buf = buf; memcpy(local_buf, txbuf, n_tx); - x.tx_buf = local_buf; - x.rx_buf = local_buf; + x[0].tx_buf = local_buf; + x[1].rx_buf = local_buf + n_tx; /* do the i/o */ status = spi_sync(spi, &message); if (status == 0) - memcpy(rxbuf, x.rx_buf + n_tx, n_rx); + memcpy(rxbuf, x[1].rx_buf, n_rx); - if (x.tx_buf == buf) + if (x[0].tx_buf == buf) mutex_unlock(&lock); else kfree(local_buf); -- cgit v0.10.2 From 5341cfab94ec05b8a45726f9fe15e71c0cd9b915 Mon Sep 17 00:00:00 2001 From: Andrea Righi Date: Mon, 13 Apr 2009 14:39:58 -0700 Subject: res_counter: update documentation After the introduction of resource counters hierarchies (28dbc4b6a01fb579a9441c7b81e3d3413dc452df) the prototypes of res_counter_init() and res_counter_charge() have been changed. Keep the documentation consistent with the actual function prototypes. Signed-off-by: Andrea Righi Cc: Paul Menage Cc: Pavel Emelyanov Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cgroups/resource_counter.txt b/Documentation/cgroups/resource_counter.txt index f196ac1..95b24d7 100644 --- a/Documentation/cgroups/resource_counter.txt +++ b/Documentation/cgroups/resource_counter.txt @@ -47,13 +47,18 @@ to work with it. 2. Basic accounting routines - a. void res_counter_init(struct res_counter *rc) + a. void res_counter_init(struct res_counter *rc, + struct res_counter *rc_parent) Initializes the resource counter. As usual, should be the first routine called for a new counter. - b. int res_counter_charge[_locked] - (struct res_counter *rc, unsigned long val) + The struct res_counter *parent can be used to define a hierarchical + child -> parent relationship directly in the res_counter structure, + NULL can be used to define no relationship. + + c. int res_counter_charge(struct res_counter *rc, unsigned long val, + struct res_counter **limit_fail_at) When a resource is about to be allocated it has to be accounted with the appropriate resource counter (controller should determine @@ -67,15 +72,25 @@ to work with it. * if the charging is performed first, then it should be uncharged on error path (if the one is called). - c. void res_counter_uncharge[_locked] + If the charging fails and a hierarchical dependency exists, the + limit_fail_at parameter is set to the particular res_counter element + where the charging failed. + + d. int res_counter_charge_locked + (struct res_counter *rc, unsigned long val) + + The same as res_counter_charge(), but it must not acquire/release the + res_counter->lock internally (it must be called with res_counter->lock + held). + + e. void res_counter_uncharge[_locked] (struct res_counter *rc, unsigned long val) When a resource is released (freed) it should be de-accounted from the resource counter it was accounted to. This is called "uncharging". - The _locked routines imply that the res_counter->lock is taken. - + The _locked routines imply that the res_counter->lock is taken. 2.1 Other accounting routines -- cgit v0.10.2 From 1faca76fad20435328e6ffd7d852022097c94fa4 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 13 Apr 2009 14:39:59 -0700 Subject: include/video/cyblafb.h: remove it, it's unused commit ddb53d48da5b0e691f35e703ac29118747f86c99 ("fbdev: remove cyblafb driver") removed drivers/video/cyblafb.c, but not its .h file Signed-off-by: Joe Perches Cc: Krzysztof Helt Cc: "Jani Monoses" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/video/cyblafb.h b/include/video/cyblafb.h deleted file mode 100644 index d3c1d4e..0000000 --- a/include/video/cyblafb.h +++ /dev/null @@ -1,175 +0,0 @@ - -#ifndef CYBLAFB_DEBUG -#define CYBLAFB_DEBUG 0 -#endif - -#if CYBLAFB_DEBUG -#define debug(f,a...) printk("%s:" f, __func__ , ## a); -#else -#define debug(f,a...) -#endif - -#define output(f, a...) printk("cyblafb: " f, ## a) - -#define Kb (1024) -#define Mb (Kb*Kb) - -/* PCI IDS of supported cards temporarily here */ - -#define CYBERBLADEi1 0x8500 - -/* these defines are for 'lcd' variable */ -#define LCD_STRETCH 0 -#define LCD_CENTER 1 -#define LCD_BIOS 2 - -/* display types */ -#define DISPLAY_CRT 0 -#define DISPLAY_FP 1 - -#define ROP_S 0xCC - -#define point(x,y) ((y)<<16|(x)) - -// -// Attribute Regs, ARxx, 3c0/3c1 -// -#define AR00 0x00 -#define AR01 0x01 -#define AR02 0x02 -#define AR03 0x03 -#define AR04 0x04 -#define AR05 0x05 -#define AR06 0x06 -#define AR07 0x07 -#define AR08 0x08 -#define AR09 0x09 -#define AR0A 0x0A -#define AR0B 0x0B -#define AR0C 0x0C -#define AR0D 0x0D -#define AR0E 0x0E -#define AR0F 0x0F -#define AR10 0x10 -#define AR12 0x12 -#define AR13 0x13 - -// -// Sequencer Regs, SRxx, 3c4/3c5 -// -#define SR00 0x00 -#define SR01 0x01 -#define SR02 0x02 -#define SR03 0x03 -#define SR04 0x04 -#define SR0D 0x0D -#define SR0E 0x0E -#define SR11 0x11 -#define SR18 0x18 -#define SR19 0x19 - -// -// -// -#define CR00 0x00 -#define CR01 0x01 -#define CR02 0x02 -#define CR03 0x03 -#define CR04 0x04 -#define CR05 0x05 -#define CR06 0x06 -#define CR07 0x07 -#define CR08 0x08 -#define CR09 0x09 -#define CR0A 0x0A -#define CR0B 0x0B -#define CR0C 0x0C -#define CR0D 0x0D -#define CR0E 0x0E -#define CR0F 0x0F -#define CR10 0x10 -#define CR11 0x11 -#define CR12 0x12 -#define CR13 0x13 -#define CR14 0x14 -#define CR15 0x15 -#define CR16 0x16 -#define CR17 0x17 -#define CR18 0x18 -#define CR19 0x19 -#define CR1A 0x1A -#define CR1B 0x1B -#define CR1C 0x1C -#define CR1D 0x1D -#define CR1E 0x1E -#define CR1F 0x1F -#define CR20 0x20 -#define CR21 0x21 -#define CR27 0x27 -#define CR29 0x29 -#define CR2A 0x2A -#define CR2B 0x2B -#define CR2D 0x2D -#define CR2F 0x2F -#define CR36 0x36 -#define CR38 0x38 -#define CR39 0x39 -#define CR3A 0x3A -#define CR55 0x55 -#define CR56 0x56 -#define CR57 0x57 -#define CR58 0x58 - -// -// -// - -#define GR00 0x01 -#define GR01 0x01 -#define GR02 0x02 -#define GR03 0x03 -#define GR04 0x04 -#define GR05 0x05 -#define GR06 0x06 -#define GR07 0x07 -#define GR08 0x08 -#define GR0F 0x0F -#define GR20 0x20 -#define GR23 0x23 -#define GR2F 0x2F -#define GR30 0x30 -#define GR31 0x31 -#define GR33 0x33 -#define GR52 0x52 -#define GR53 0x53 -#define GR5D 0x5d - - -// -// Graphics Engine -// -#define GEBase 0x2100 // could be mapped elsewhere if we like it -#define GE00 (GEBase+0x00) // source 1, p 111 -#define GE04 (GEBase+0x04) // source 2, p 111 -#define GE08 (GEBase+0x08) // destination 1, p 111 -#define GE0C (GEBase+0x0C) // destination 2, p 112 -#define GE10 (GEBase+0x10) // right view base & enable, p 112 -#define GE13 (GEBase+0x13) // left view base & enable, p 112 -#define GE18 (GEBase+0x18) // block write start address, p 112 -#define GE1C (GEBase+0x1C) // block write end address, p 112 -#define GE20 (GEBase+0x20) // engine status, p 113 -#define GE24 (GEBase+0x24) // reset all GE pointers -#define GE44 (GEBase+0x44) // command register, p 126 -#define GE48 (GEBase+0x48) // raster operation, p 127 -#define GE60 (GEBase+0x60) // foreground color, p 128 -#define GE64 (GEBase+0x64) // background color, p 128 -#define GE6C (GEBase+0x6C) // Pattern and Style, p 129, ok -#define GE9C (GEBase+0x9C) // pixel engine data port, p 125 -#define GEB8 (GEBase+0xB8) // Destination Stride / Buffer Base 0, p 133 -#define GEBC (GEBase+0xBC) // Destination Stride / Buffer Base 1, p 133 -#define GEC0 (GEBase+0xC0) // Destination Stride / Buffer Base 2, p 133 -#define GEC4 (GEBase+0xC4) // Destination Stride / Buffer Base 3, p 133 -#define GEC8 (GEBase+0xC8) // Source Stride / Buffer Base 0, p 133 -#define GECC (GEBase+0xCC) // Source Stride / Buffer Base 1, p 133 -#define GED0 (GEBase+0xD0) // Source Stride / Buffer Base 2, p 133 -#define GED4 (GEBase+0xD4) // Source Stride / Buffer Base 3, p 133 -- cgit v0.10.2 From 267b01fe8345098b9459f5bac3d97cbba3264ec4 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Mon, 13 Apr 2009 14:40:00 -0700 Subject: sysrq: remove duplicated #include Remove duplicated #include in drivers/char/sysrq.c. Signed-off-by: Huang Weiyi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index 6de020d..b0a6a3e 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From 5a52edded382c2f436721d5a044ed16c290c5750 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 13 Apr 2009 14:40:01 -0700 Subject: mm: point the UNEVICTABLE_LRU config option at the documentation Point the UNEVICTABLE_LRU config option at the documentation describing the option. Signed-off-by: David Howells Cc: Lee Schermerhorn Cc: Rik van Riel Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/Kconfig b/mm/Kconfig index b53427a..57971d2 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -213,6 +213,8 @@ config UNEVICTABLE_LRU will use one page flag and increase the code size a little, say Y unless you know what you are doing. + See Documentation/vm/unevictable-lru.txt for more information. + config HAVE_MLOCK bool default y if MMU=y -- cgit v0.10.2 From c24b720188e9a1f83caa5b6d49b4cb5b843256f1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 13 Apr 2009 14:40:01 -0700 Subject: mm: reformat the Unevictable-LRU documentation Do a bit of reformatting on the Unevictable-LRU documentation. Signed-off-by: David Howells Acked-by: Lee Schermerhorn Cc: Rik van Riel Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index 0706a72..2d70d0d 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -1,588 +1,691 @@ - -This document describes the Linux memory management "Unevictable LRU" -infrastructure and the use of this infrastructure to manage several types -of "unevictable" pages. The document attempts to provide the overall -rationale behind this mechanism and the rationale for some of the design -decisions that drove the implementation. The latter design rationale is -discussed in the context of an implementation description. Admittedly, one -can obtain the implementation details--the "what does it do?"--by reading the -code. One hopes that the descriptions below add value by provide the answer -to "why does it do that?". - -Unevictable LRU Infrastructure: - -The Unevictable LRU adds an additional LRU list to track unevictable pages -and to hide these pages from vmscan. This mechanism is based on a patch by -Larry Woodman of Red Hat to address several scalability problems with page + ============================== + UNEVICTABLE LRU INFRASTRUCTURE + ============================== + +======== +CONTENTS +======== + + (*) The Unevictable LRU + + - The unevictable page list. + - Memory control group interaction. + - Marking address spaces unevictable. + - Detecting Unevictable Pages. + - vmscan's handling of unevictable pages. + + (*) mlock()'d pages. + + - History. + - Basic management. + - mlock()/mlockall() system call handling. + - Filtering special vmas. + - munlock()/munlockall() system call handling. + - Migrating mlocked pages. + - mmap(MAP_LOCKED) system call handling. + - munmap()/exit()/exec() system call handling. + - try_to_unmap(). + - try_to_munlock() reverse map scan. + - Page reclaim in shrink_*_list(). + + +============ +INTRODUCTION +============ + +This document describes the Linux memory manager's "Unevictable LRU" +infrastructure and the use of this to manage several types of "unevictable" +pages. + +The document attempts to provide the overall rationale behind this mechanism +and the rationale for some of the design decisions that drove the +implementation. The latter design rationale is discussed in the context of an +implementation description. Admittedly, one can obtain the implementation +details - the "what does it do?" - by reading the code. One hopes that the +descriptions below add value by provide the answer to "why does it do that?". + + +=================== +THE UNEVICTABLE LRU +=================== + +The Unevictable LRU facility adds an additional LRU list to track unevictable +pages and to hide these pages from vmscan. This mechanism is based on a patch +by Larry Woodman of Red Hat to address several scalability problems with page reclaim in Linux. The problems have been observed at customer sites on large -memory x86_64 systems. For example, a non-numal x86_64 platform with 128GB -of main memory will have over 32 million 4k pages in a single zone. When a -large fraction of these pages are not evictable for any reason [see below], -vmscan will spend a lot of time scanning the LRU lists looking for the small -fraction of pages that are evictable. This can result in a situation where -all cpus are spending 100% of their time in vmscan for hours or days on end, -with the system completely unresponsive. - -The Unevictable LRU infrastructure addresses the following classes of -unevictable pages: - -+ page owned by ramfs -+ page mapped into SHM_LOCKed shared memory regions -+ page mapped into VM_LOCKED [mlock()ed] vmas - -The infrastructure might be able to handle other conditions that make pages +memory x86_64 systems. + +To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of +main memory will have over 32 million 4k pages in a single zone. When a large +fraction of these pages are not evictable for any reason [see below], vmscan +will spend a lot of time scanning the LRU lists looking for the small fraction +of pages that are evictable. This can result in a situation where all CPUs are +spending 100% of their time in vmscan for hours or days on end, with the system +completely unresponsive. + +The unevictable list addresses the following classes of unevictable pages: + + (*) Those owned by ramfs. + + (*) Those mapped into SHM_LOCK'd shared memory regions. + + (*) Those mapped into VM_LOCKED [mlock()ed] VMAs. + +The infrastructure may also be able to handle other conditions that make pages unevictable, either by definition or by circumstance, in the future. -The Unevictable LRU List +THE UNEVICTABLE PAGE LIST +------------------------- The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list called the "unevictable" list and an associated page flag, PG_unevictable, to -indicate that the page is being managed on the unevictable list. The -PG_unevictable flag is analogous to, and mutually exclusive with, the PG_active -flag in that it indicates on which LRU list a page resides when PG_lru is set. -The unevictable LRU list is source configurable based on the UNEVICTABLE_LRU -Kconfig option. +indicate that the page is being managed on the unevictable list. + +The PG_unevictable flag is analogous to, and mutually exclusive with, the +PG_active flag in that it indicates on which LRU list a page resides when +PG_lru is set. The unevictable list is compile-time configurable based on the +UNEVICTABLE_LRU Kconfig option. The Unevictable LRU infrastructure maintains unevictable pages on an additional LRU list for a few reasons: -1) We get to "treat unevictable pages just like we treat other pages in the - system, which means we get to use the same code to manipulate them, the - same code to isolate them (for migrate, etc.), the same code to keep track - of the statistics, etc..." [Rik van Riel] + (1) We get to "treat unevictable pages just like we treat other pages in the + system - which means we get to use the same code to manipulate them, the + same code to isolate them (for migrate, etc.), the same code to keep track + of the statistics, etc..." [Rik van Riel] + + (2) We want to be able to migrate unevictable pages between nodes for memory + defragmentation, workload management and memory hotplug. The linux kernel + can only migrate pages that it can successfully isolate from the LRU + lists. If we were to maintain pages elsewhere than on an LRU-like list, + where they can be found by isolate_lru_page(), we would prevent their + migration, unless we reworked migration code to find the unevictable pages + itself. -2) We want to be able to migrate unevictable pages between nodes--for memory - defragmentation, workload management and memory hotplug. The linux kernel - can only migrate pages that it can successfully isolate from the lru lists. - If we were to maintain pages elsewise than on an lru-like list, where they - can be found by isolate_lru_page(), we would prevent their migration, unless - we reworked migration code to find the unevictable pages. +The unevictable list does not differentiate between file-backed and anonymous, +swap-backed pages. This differentiation is only important while the pages are, +in fact, evictable. -The unevictable LRU list does not differentiate between file backed and swap -backed [anon] pages. This differentiation is only important while the pages -are, in fact, evictable. +The unevictable list benefits from the "arrayification" of the per-zone LRU +lists and statistics originally proposed and posted by Christoph Lameter. -The unevictable LRU list benefits from the "arrayification" of the per-zone -LRU lists and statistics originally proposed and posted by Christoph Lameter. +The unevictable list does not use the LRU pagevec mechanism. Rather, +unevictable pages are placed directly on the page's zone's unevictable list +under the zone lru_lock. This allows us to prevent the stranding of pages on +the unevictable list when one task has the page isolated from the LRU and other +tasks are changing the "evictability" state of the page. -The unevictable list does not use the lru pagevec mechanism. Rather, -unevictable pages are placed directly on the page's zone's unevictable -list under the zone lru_lock. The reason for this is to prevent stranding -of pages on the unevictable list when one task has the page isolated from the -lru and other tasks are changing the "evictability" state of the page. +MEMORY CONTROL GROUP INTERACTION +-------------------------------- -Unevictable LRU and Memory Controller Interaction +The unevictable LRU facility interacts with the memory control group [aka +memory controller; see Documentation/cgroups/memory.txt] by extending the +lru_list enum. + +The memory controller data structure automatically gets a per-zone unevictable +list as a result of the "arrayification" of the per-zone LRU lists (one per +lru_list enum element). The memory controller tracks the movement of pages to +and from the unevictable list. -The memory controller data structure automatically gets a per zone unevictable -lru list as a result of the "arrayification" of the per-zone LRU lists. The -memory controller tracks the movement of pages to and from the unevictable list. When a memory control group comes under memory pressure, the controller will not attempt to reclaim pages on the unevictable list. This has a couple of -effects. Because the pages are "hidden" from reclaim on the unevictable list, -the reclaim process can be more efficient, dealing only with pages that have -a chance of being reclaimed. On the other hand, if too many of the pages -charged to the control group are unevictable, the evictable portion of the -working set of the tasks in the control group may not fit into the available -memory. This can cause the control group to thrash or to oom-kill tasks. - - -Unevictable LRU: Detecting Unevictable Pages - -The function page_evictable(page, vma) in vmscan.c determines whether a -page is evictable or not. For ramfs pages and pages in SHM_LOCKed regions, -page_evictable() tests a new address space flag, AS_UNEVICTABLE, in the page's -address space using a wrapper function. Wrapper functions are used to set, -clear and test the flag to reduce the requirement for #ifdef's throughout the -source code. AS_UNEVICTABLE is set on ramfs inode/mapping when it is created. -This flag remains for the life of the inode. - -For shared memory regions, AS_UNEVICTABLE is set when an application -successfully SHM_LOCKs the region and is removed when the region is -SHM_UNLOCKed. Note that shmctl(SHM_LOCK, ...) does not populate the page -tables for the region as does, for example, mlock(). So, we make no special -effort to push any pages in the SHM_LOCKed region to the unevictable list. -Vmscan will do this when/if it encounters the pages during reclaim. On -SHM_UNLOCK, shmctl() scans the pages in the region and "rescues" them from the -unevictable list if no other condition keeps them unevictable. If a SHM_LOCKed -region is destroyed, the pages are also "rescued" from the unevictable list in -the process of freeing them. - -page_evictable() detects mlock()ed pages by testing an additional page flag, -PG_mlocked via the PageMlocked() wrapper. If the page is NOT mlocked, and a -non-NULL vma is supplied, page_evictable() will check whether the vma is +effects: + + (1) Because the pages are "hidden" from reclaim on the unevictable list, the + reclaim process can be more efficient, dealing only with pages that have a + chance of being reclaimed. + + (2) On the other hand, if too many of the pages charged to the control group + are unevictable, the evictable portion of the working set of the tasks in + the control group may not fit into the available memory. This can cause + the control group to thrash or to OOM-kill tasks. + + +MARKING ADDRESS SPACES UNEVICTABLE +---------------------------------- + +For facilities such as ramfs none of the pages attached to the address space +may be evicted. To prevent eviction of any such pages, the AS_UNEVICTABLE +address space flag is provided, and this can be manipulated by a filesystem +using a number of wrapper functions: + + (*) void mapping_set_unevictable(struct address_space *mapping); + + Mark the address space as being completely unevictable. + + (*) void mapping_clear_unevictable(struct address_space *mapping); + + Mark the address space as being evictable. + + (*) int mapping_unevictable(struct address_space *mapping); + + Query the address space, and return true if it is completely + unevictable. + +These are currently used in two places in the kernel: + + (1) By ramfs to mark the address spaces of its inodes when they are created, + and this mark remains for the life of the inode. + + (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called. + + Note that SHM_LOCK is not required to page in the locked pages if they're + swapped out; the application must touch the pages manually if it wants to + ensure they're in memory. + + +DETECTING UNEVICTABLE PAGES +--------------------------- + +The function page_evictable() in vmscan.c determines whether a page is +evictable or not using the query function outlined above [see section "Marking +address spaces unevictable"] to check the AS_UNEVICTABLE flag. + +For address spaces that are so marked after being populated (as SHM regions +might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate +the page tables for the region as does, for example, mlock(), nor need it make +any special effort to push any pages in the SHM_LOCK'd area to the unevictable +list. Instead, vmscan will do this if and when it encounters the pages during +a reclamation scan. + +On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan +the pages in the region and "rescue" them from the unevictable list if no other +condition is keeping them unevictable. If an unevictable region is destroyed, +the pages are also "rescued" from the unevictable list in the process of +freeing them. + +page_evictable() also checks for mlocked pages by testing an additional page +flag, PG_mlocked (as wrapped by PageMlocked()). If the page is NOT mlocked, +and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is VM_LOCKED via is_mlocked_vma(). is_mlocked_vma() will SetPageMlocked() and update the appropriate statistics if the vma is VM_LOCKED. This method allows efficient "culling" of pages in the fault path that are being faulted in to -VM_LOCKED vmas. +VM_LOCKED VMAs. -Unevictable Pages and Vmscan [shrink_*_list()] +VMSCAN'S HANDLING OF UNEVICTABLE PAGES +-------------------------------------- If unevictable pages are culled in the fault path, or moved to the unevictable -list at mlock() or mmap() time, vmscan will never encounter the pages until -they have become evictable again, for example, via munlock() and have been -"rescued" from the unevictable list. However, there may be situations where we -decide, for the sake of expediency, to leave a unevictable page on one of the -regular active/inactive LRU lists for vmscan to deal with. Vmscan checks for -such pages in all of the shrink_{active|inactive|page}_list() functions and -will "cull" such pages that it encounters--that is, it diverts those pages to -the unevictable list for the zone being scanned. - -There may be situations where a page is mapped into a VM_LOCKED vma, but the -page is not marked as PageMlocked. Such pages will make it all the way to +list at mlock() or mmap() time, vmscan will not encounter the pages until they +have become evictable again (via munlock() for example) and have been "rescued" +from the unevictable list. However, there may be situations where we decide, +for the sake of expediency, to leave a unevictable page on one of the regular +active/inactive LRU lists for vmscan to deal with. vmscan checks for such +pages in all of the shrink_{active|inactive|page}_list() functions and will +"cull" such pages that it encounters: that is, it diverts those pages to the +unevictable list for the zone being scanned. + +There may be situations where a page is mapped into a VM_LOCKED VMA, but the +page is not marked as PG_mlocked. Such pages will make it all the way to shrink_page_list() where they will be detected when vmscan walks the reverse -map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, shrink_page_list() -will cull the page at that point. +map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, +shrink_page_list() will cull the page at that point. -To "cull" an unevictable page, vmscan simply puts the page back on the lru -list using putback_lru_page()--the inverse operation to isolate_lru_page()-- -after dropping the page lock. Because the condition which makes the page -unevictable may change once the page is unlocked, putback_lru_page() will -recheck the unevictable state of a page that it places on the unevictable lru -list. If the page has become unevictable, putback_lru_page() removes it from -the list and retries, including the page_unevictable() test. Because such a -race is a rare event and movement of pages onto the unevictable list should be -rare, these extra evictabilty checks should not occur in the majority of calls -to putback_lru_page(). +To "cull" an unevictable page, vmscan simply puts the page back on the LRU list +using putback_lru_page() - the inverse operation to isolate_lru_page() - after +dropping the page lock. Because the condition which makes the page unevictable +may change once the page is unlocked, putback_lru_page() will recheck the +unevictable state of a page that it places on the unevictable list. If the +page has become unevictable, putback_lru_page() removes it from the list and +retries, including the page_unevictable() test. Because such a race is a rare +event and movement of pages onto the unevictable list should be rare, these +extra evictabilty checks should not occur in the majority of calls to +putback_lru_page(). -Mlocked Page: Prior Work +============= +MLOCKED PAGES +============= -The "Unevictable Mlocked Pages" infrastructure is based on work originally +The unevictable page list is also useful for mlock(), in addition to ramfs and +SYSV SHM. Note that mlock() is only available in CONFIG_MMU=y situations; in +NOMMU situations, all mappings are effectively mlocked. + + +HISTORY +------- + +The "Unevictable mlocked Pages" infrastructure is based on work originally posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU". -Nick posted his patch as an alternative to a patch posted by Christoph -Lameter to achieve the same objective--hiding mlocked pages from vmscan. -In Nick's patch, he used one of the struct page lru list link fields as a count -of VM_LOCKED vmas that map the page. This use of the link field for a count -prevented the management of the pages on an LRU list. Thus, mlocked pages were -not migratable as isolate_lru_page() could not find them and the lru list link -field was not available to the migration subsystem. Nick resolved this by -putting mlocked pages back on the lru list before attempting to isolate them, -thus abandoning the count of VM_LOCKED vmas. When Nick's patch was integrated -with the Unevictable LRU work, the count was replaced by walking the reverse -map to determine whether any VM_LOCKED vmas mapped the page. More on this -below. - - -Mlocked Pages: Basic Management - -Mlocked pages--pages mapped into a VM_LOCKED vma--represent one class of -unevictable pages. When such a page has been "noticed" by the memory -management subsystem, the page is marked with the PG_mlocked [PageMlocked()] -flag. A PageMlocked() page will be placed on the unevictable LRU list when -it is added to the LRU. Pages can be "noticed" by memory management in -several places: - -1) in the mlock()/mlockall() system call handlers. -2) in the mmap() system call handler when mmap()ing a region with the - MAP_LOCKED flag, or mmap()ing a region in a task that has called - mlockall() with the MCL_FUTURE flag. Both of these conditions result - in the VM_LOCKED flag being set for the vma. -3) in the fault path, if mlocked pages are "culled" in the fault path, - and when a VM_LOCKED stack segment is expanded. -4) as mentioned above, in vmscan:shrink_page_list() when attempting to - reclaim a page in a VM_LOCKED vma via try_to_unmap(). - -Mlocked pages become unlocked and rescued from the unevictable list when: - -1) mapped in a range unlocked via the munlock()/munlockall() system calls. -2) munmapped() out of the last VM_LOCKED vma that maps the page, including - unmapping at task exit. -3) when the page is truncated from the last VM_LOCKED vma of an mmap()ed file. -4) before a page is COWed in a VM_LOCKED vma. - - -Mlocked Pages: mlock()/mlockall() System Call Handling +Nick posted his patch as an alternative to a patch posted by Christoph Lameter +to achieve the same objective: hiding mlocked pages from vmscan. + +In Nick's patch, he used one of the struct page LRU list link fields as a count +of VM_LOCKED VMAs that map the page. This use of the link field for a count +prevented the management of the pages on an LRU list, and thus mlocked pages +were not migratable as isolate_lru_page() could not find them, and the LRU list +link field was not available to the migration subsystem. + +Nick resolved this by putting mlocked pages back on the lru list before +attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs. When +Nick's patch was integrated with the Unevictable LRU work, the count was +replaced by walking the reverse map to determine whether any VM_LOCKED VMAs +mapped the page. More on this below. + + +BASIC MANAGEMENT +---------------- + +mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable +pages. When such a page has been "noticed" by the memory management subsystem, +the page is marked with the PG_mlocked flag. This can be manipulated using the +PageMlocked() functions. + +A PG_mlocked page will be placed on the unevictable list when it is added to +the LRU. Such pages can be "noticed" by memory management in several places: + + (1) in the mlock()/mlockall() system call handlers; + + (2) in the mmap() system call handler when mmapping a region with the + MAP_LOCKED flag; + + (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE + flag + + (4) in the fault path, if mlocked pages are "culled" in the fault path, + and when a VM_LOCKED stack segment is expanded; or + + (5) as mentioned above, in vmscan:shrink_page_list() when attempting to + reclaim a page in a VM_LOCKED VMA via try_to_unmap() + +all of which result in the VM_LOCKED flag being set for the VMA if it doesn't +already have it set. + +mlocked pages become unlocked and rescued from the unevictable list when: + + (1) mapped in a range unlocked via the munlock()/munlockall() system calls; + + (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including + unmapping at task exit; + + (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file; + or + + (4) before a page is COW'd in a VM_LOCKED VMA. + + +mlock()/mlockall() SYSTEM CALL HANDLING +--------------------------------------- Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup() -for each vma in the range specified by the call. In the case of mlockall(), +for each VMA in the range specified by the call. In the case of mlockall(), this is the entire active address space of the task. Note that mlock_fixup() -is used for both mlock()ing and munlock()ing a range of memory. A call to -mlock() an already VM_LOCKED vma, or to munlock() a vma that is not VM_LOCKED -is treated as a no-op--mlock_fixup() simply returns. - -If the vma passes some filtering described in "Mlocked Pages: Filtering Vmas" -below, mlock_fixup() will attempt to merge the vma with its neighbors or split -off a subset of the vma if the range does not cover the entire vma. Once the -vma has been merged or split or neither, mlock_fixup() will call -__mlock_vma_pages_range() to fault in the pages via get_user_pages() and -to mark the pages as mlocked via mlock_vma_page(). - -Note that the vma being mlocked might be mapped with PROT_NONE. In this case, -get_user_pages() will be unable to fault in the pages. That's OK. If pages -do end up getting faulted into this VM_LOCKED vma, we'll handle them in the +is used for both mlocking and munlocking a range of memory. A call to mlock() +an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is +treated as a no-op, and mlock_fixup() simply returns. + +If the VMA passes some filtering as described in "Filtering Special Vmas" +below, mlock_fixup() will attempt to merge the VMA with its neighbors or split +off a subset of the VMA if the range does not cover the entire VMA. Once the +VMA has been merged or split or neither, mlock_fixup() will call +__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to +mark the pages as mlocked via mlock_vma_page(). + +Note that the VMA being mlocked might be mapped with PROT_NONE. In this case, +get_user_pages() will be unable to fault in the pages. That's okay. If pages +do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the fault path or in vmscan. Also note that a page returned by get_user_pages() could be truncated or -migrated out from under us, while we're trying to mlock it. To detect -this, __mlock_vma_pages_range() tests the page_mapping after acquiring -the page lock. If the page is still associated with its mapping, we'll -go ahead and call mlock_vma_page(). If the mapping is gone, we just -unlock the page and move on. Worse case, this results in page mapped -in a VM_LOCKED vma remaining on a normal LRU list without being -PageMlocked(). Again, vmscan will detect and cull such pages. - -mlock_vma_page(), called with the page locked [N.B., not "mlocked"], will -TestSetPageMlocked() for each page returned by get_user_pages(). We use -TestSetPageMlocked() because the page might already be mlocked by another -task/vma and we don't want to do extra work. We especially do not want to -count an mlocked page more than once in the statistics. If the page was -already mlocked, mlock_vma_page() is done. +migrated out from under us, while we're trying to mlock it. To detect this, +__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock. +If the page is still associated with its mapping, we'll go ahead and call +mlock_vma_page(). If the mapping is gone, we just unlock the page and move on. +In the worst case, this will result in a page mapped in a VM_LOCKED VMA +remaining on a normal LRU list without being PageMlocked(). Again, vmscan will +detect and cull such pages. + +mlock_vma_page() will call TestSetPageMlocked() for each page returned by +get_user_pages(). We use TestSetPageMlocked() because the page might already +be mlocked by another task/VMA and we don't want to do extra work. We +especially do not want to count an mlocked page more than once in the +statistics. If the page was already mlocked, mlock_vma_page() need do nothing +more. If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the page from the LRU, as it is likely on the appropriate active or inactive list -at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will -putback the page--putback_lru_page()--which will notice that the page is now -mlocked and divert the page to the zone's unevictable LRU list. If +at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will put +back the page - by calling putback_lru_page() - which will notice that the page +is now mlocked and divert the page to the zone's unevictable list. If mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle -it later if/when it attempts to reclaim the page. +it later if and when it attempts to reclaim the page. -Mlocked Pages: Filtering Special Vmas +FILTERING SPECIAL VMAS +---------------------- -mlock_fixup() filters several classes of "special" vmas: +mlock_fixup() filters several classes of "special" VMAs: -1) vmas with VM_IO|VM_PFNMAP set are skipped entirely. The pages behind +1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely. The pages behind these mappings are inherently pinned, so we don't need to mark them as - mlocked. In any case, most of the pages have no struct page in which to - so mark the page. Because of this, get_user_pages() will fail for these - vmas, so there is no sense in attempting to visit them. - -2) vmas mapping hugetlbfs page are already effectively pinned into memory. - We don't need nor want to mlock() these pages. However, to preserve the - prior behavior of mlock()--before the unevictable/mlock changes-- - mlock_fixup() will call make_pages_present() in the hugetlbfs vma range - to allocate the huge pages and populate the ptes. - -3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of - kernel pages, such as the vdso page, relay channel pages, etc. These pages + mlocked. In any case, most of the pages have no struct page in which to so + mark the page. Because of this, get_user_pages() will fail for these VMAs, + so there is no sense in attempting to visit them. + +2) VMAs mapping hugetlbfs page are already effectively pinned into memory. We + neither need nor want to mlock() these pages. However, to preserve the + prior behavior of mlock() - before the unevictable/mlock changes - + mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to + allocate the huge pages and populate the ptes. + +3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of + kernel pages, such as the VDSO page, relay channel pages, etc. These pages are inherently unevictable and are not managed on the LRU lists. - mlock_fixup() treats these vmas the same as hugetlbfs vmas. It calls + mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls make_pages_present() to populate the ptes. -Note that for all of these special vmas, mlock_fixup() does not set the +Note that for all of these special VMAs, mlock_fixup() does not set the VM_LOCKED flag. Therefore, we won't have to deal with them later during -munlock() or munmap()--for example, at task exit. Neither does mlock_fixup() -account these vmas against the task's "locked_vm". - -Mlocked Pages: Downgrading the Mmap Semaphore. - -mlock_fixup() must be called with the mmap semaphore held for write, because -it may have to merge or split vmas. However, mlocking a large region of -memory can take a long time--especially if vmscan must reclaim pages to -satisfy the regions requirements. Faulting in a large region with the mmap -semaphore held for write can hold off other faults on the address space, in -the case of a multi-threaded task. It can also hold off scans of the task's -address space via /proc. While testing under heavy load, it was observed that -the ps(1) command could be held off for many minutes while a large segment was -mlock()ed down. - -To address this issue, and to make the system more responsive during mlock()ing -of large segments, mlock_fixup() downgrades the mmap semaphore to read mode -during the call to __mlock_vma_pages_range(). This works fine. However, the -callers of mlock_fixup() expect the semaphore to be returned in write mode. -So, mlock_fixup() "upgrades" the semphore to write mode. Linux does not -support an atomic upgrade_sem() call, so mlock_fixup() must drop the semaphore -and reacquire it in write mode. In a multi-threaded task, it is possible for -the task memory map to change while the semaphore is dropped. Therefore, -mlock_fixup() looks up the vma at the range start address after reacquiring -the semaphore in write mode and verifies that it still covers the original -range. If not, mlock_fixup() returns an error [-EAGAIN]. All callers of -mlock_fixup() have been changed to deal with this new error condition. - -Note: when munlocking a region, all of the pages should already be resident-- -unless we have racing threads mlocking() and munlocking() regions. So, -unlocking should not have to wait for page allocations nor faults of any kind. -Therefore mlock_fixup() does not downgrade the semaphore for munlock(). - - -Mlocked Pages: munlock()/munlockall() System Call Handling - -The munlock() and munlockall() system calls are handled by the same functions-- -do_mlock[all]()--as the mlock() and mlockall() system calls with the unlock -vs lock operation indicated by an argument. So, these system calls are also -handled by mlock_fixup(). Again, if called for an already munlock()ed vma, -mlock_fixup() simply returns. Because of the vma filtering discussed above, -VM_LOCKED will not be set in any "special" vmas. So, these vmas will be +munlock(), munmap() or task exit. Neither does mlock_fixup() account these +VMAs against the task's "locked_vm". + + +munlock()/munlockall() SYSTEM CALL HANDLING +------------------------------------------- + +The munlock() and munlockall() system calls are handled by the same functions - +do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs +lock operation indicated by an argument. So, these system calls are also +handled by mlock_fixup(). Again, if called for an already munlocked VMA, +mlock_fixup() simply returns. Because of the VMA filtering discussed above, +VM_LOCKED will not be set in any "special" VMAs. So, these VMAs will be ignored for munlock. -If the vma is VM_LOCKED, mlock_fixup() again attempts to merge or split off -the specified range. The range is then munlocked via the function -__mlock_vma_pages_range()--the same function used to mlock a vma range-- +If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the +specified range. The range is then munlocked via the function +__mlock_vma_pages_range() - the same function used to mlock a VMA range - passing a flag to indicate that munlock() is being performed. -Because the vma access protections could have been changed to PROT_NONE after +Because the VMA access protections could have been changed to PROT_NONE after faulting in and mlocking pages, get_user_pages() was unreliable for visiting -these pages for munlocking. Because we don't want to leave pages mlocked(), +these pages for munlocking. Because we don't want to leave pages mlocked, get_user_pages() was enhanced to accept a flag to ignore the permissions when -fetching the pages--all of which should be resident as a result of previous -mlock()ing. +fetching the pages - all of which should be resident as a result of previous +mlocking. For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked -flag using TestClearPageMlocked(). As with mlock_vma_page(), munlock_vma_page() -use the Test*PageMlocked() function to handle the case where the page might -have already been unlocked by another task. If the page was mlocked, -munlock_vma_page() updates that zone statistics for the number of mlocked -pages. Note, however, that at this point we haven't checked whether the page -is mapped by other VM_LOCKED vmas. - -We can't call try_to_munlock(), the function that walks the reverse map to check -for other VM_LOCKED vmas, without first isolating the page from the LRU. +flag using TestClearPageMlocked(). As with mlock_vma_page(), +munlock_vma_page() use the Test*PageMlocked() function to handle the case where +the page might have already been unlocked by another task. If the page was +mlocked, munlock_vma_page() updates that zone statistics for the number of +mlocked pages. Note, however, that at this point we haven't checked whether +the page is mapped by other VM_LOCKED VMAs. + +We can't call try_to_munlock(), the function that walks the reverse map to +check for other VM_LOCKED VMAs, without first isolating the page from the LRU. try_to_munlock() is a variant of try_to_unmap() and thus requires that the page -not be on an lru list. [More on these below.] However, the call to -isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). -So, we go ahead and clear PG_mlocked up front, as this might be the only chance -we have. If we can successfully isolate the page, we go ahead and +not be on an LRU list [more on these below]. However, the call to +isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). So, +we go ahead and clear PG_mlocked up front, as this might be the only chance we +have. If we can successfully isolate the page, we go ahead and try_to_munlock(), which will restore the PG_mlocked flag and update the zone -page statistics if it finds another vma holding the page mlocked. If we fail +page statistics if it finds another VMA holding the page mlocked. If we fail to isolate the page, we'll have left a potentially mlocked page on the LRU. -This is fine, because we'll catch it later when/if vmscan tries to reclaim the -page. This should be relatively rare. - -Mlocked Pages: Migrating Them... - -A page that is being migrated has been isolated from the lru lists and is -held locked across unmapping of the page, updating the page's mapping -[address_space] entry and copying the contents and state, until the -page table entry has been replaced with an entry that refers to the new -page. Linux supports migration of mlocked pages and other unevictable -pages. This involves simply moving the PageMlocked and PageUnevictable states -from the old page to the new page. - -Note that page migration can race with mlocking or munlocking of the same -page. This has been discussed from the mlock/munlock perspective in the -respective sections above. Both processes [migration, m[un]locking], hold -the page locked. This provides the first level of synchronization. Page -migration zeros out the page_mapping of the old page before unlocking it, -so m[un]lock can skip these pages by testing the page mapping under page -lock. - -When completing page migration, we place the new and old pages back onto the -lru after dropping the page lock. The "unneeded" page--old page on success, -new page on failure--will be freed when the reference count held by the -migration process is released. To ensure that we don't strand pages on the -unevictable list because of a race between munlock and migration, page -migration uses the putback_lru_page() function to add migrated pages back to -the lru. - - -Mlocked Pages: mmap(MAP_LOCKED) System Call Handling +This is fine, because we'll catch it later if and if vmscan tries to reclaim +the page. This should be relatively rare. + + +MIGRATING MLOCKED PAGES +----------------------- + +A page that is being migrated has been isolated from the LRU lists and is held +locked across unmapping of the page, updating the page's address space entry +and copying the contents and state, until the page table entry has been +replaced with an entry that refers to the new page. Linux supports migration +of mlocked pages and other unevictable pages. This involves simply moving the +PG_mlocked and PG_unevictable states from the old page to the new page. + +Note that page migration can race with mlocking or munlocking of the same page. +This has been discussed from the mlock/munlock perspective in the respective +sections above. Both processes (migration and m[un]locking) hold the page +locked. This provides the first level of synchronization. Page migration +zeros out the page_mapping of the old page before unlocking it, so m[un]lock +can skip these pages by testing the page mapping under page lock. + +To complete page migration, we place the new and old pages back onto the LRU +after dropping the page lock. The "unneeded" page - old page on success, new +page on failure - will be freed when the reference count held by the migration +process is released. To ensure that we don't strand pages on the unevictable +list because of a race between munlock and migration, page migration uses the +putback_lru_page() function to add migrated pages back to the LRU. + + +mmap(MAP_LOCKED) SYSTEM CALL HANDLING +------------------------------------- In addition the the mlock()/mlockall() system calls, an application can request -that a region of memory be mlocked using the MAP_LOCKED flag with the mmap() +that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap() call. Furthermore, any mmap() call or brk() call that expands the heap by a task that has previously called mlockall() with the MCL_FUTURE flag will result -in the newly mapped memory being mlocked. Before the unevictable/mlock changes, -the kernel simply called make_pages_present() to allocate pages and populate -the page table. +in the newly mapped memory being mlocked. Before the unevictable/mlock +changes, the kernel simply called make_pages_present() to allocate pages and +populate the page table. To mlock a range of memory under the unevictable/mlock infrastructure, the mmap() handler and task address space expansion functions call mlock_vma_pages_range() specifying the vma and the address range to mlock. -mlock_vma_pages_range() filters vmas like mlock_fixup(), as described above in -"Mlocked Pages: Filtering Vmas". It will clear the VM_LOCKED flag, which will -have already been set by the caller, in filtered vmas. Thus these vma's need -not be visited for munlock when the region is unmapped. +mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in +"Filtering Special VMAs". It will clear the VM_LOCKED flag, which will have +already been set by the caller, in filtered VMAs. Thus these VMA's need not be +visited for munlock when the region is unmapped. -For "normal" vmas, mlock_vma_pages_range() calls __mlock_vma_pages_range() to +For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to fault/allocate the pages and mlock them. Again, like mlock_fixup(), mlock_vma_pages_range() downgrades the mmap semaphore to read mode before -attempting to fault/allocate and mlock the pages; and "upgrades" the semaphore +attempting to fault/allocate and mlock the pages and "upgrades" the semaphore back to write mode before returning. -The callers of mlock_vma_pages_range() will have already added the memory -range to be mlocked to the task's "locked_vm". To account for filtered vmas, +The callers of mlock_vma_pages_range() will have already added the memory range +to be mlocked to the task's "locked_vm". To account for filtered VMAs, mlock_vma_pages_range() returns the number of pages NOT mlocked. All of the -callers then subtract a non-negative return value from the task's locked_vm. -A negative return value represent an error--for example, from get_user_pages() -attempting to fault in a vma with PROT_NONE access. In this case, we leave -the memory range accounted as locked_vm, as the protections could be changed -later and pages allocated into that region. +callers then subtract a non-negative return value from the task's locked_vm. A +negative return value represent an error - for example, from get_user_pages() +attempting to fault in a VMA with PROT_NONE access. In this case, we leave the +memory range accounted as locked_vm, as the protections could be changed later +and pages allocated into that region. -Mlocked Pages: munmap()/exit()/exec() System Call Handling +munmap()/exit()/exec() SYSTEM CALL HANDLING +------------------------------------------- When unmapping an mlocked region of memory, whether by an explicit call to munmap() or via an internal unmap from exit() or exec() processing, we must -munlock the pages if we're removing the last VM_LOCKED vma that maps the pages. +munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages. Before the unevictable/mlock changes, mlocking did not mark the pages in any way, so unmapping them required no processing. To munlock a range of memory under the unevictable/mlock infrastructure, the -munmap() hander and task address space tear down function call +munmap() handler and task address space call tear down function munlock_vma_pages_all(). The name reflects the observation that one always -specifies the entire vma range when munlock()ing during unmap of a region. -Because of the vma filtering when mlocking() regions, only "normal" vmas that +specifies the entire VMA range when munlock()ing during unmap of a region. +Because of the VMA filtering when mlocking() regions, only "normal" VMAs that actually contain mlocked pages will be passed to munlock_vma_pages_all(). -munlock_vma_pages_all() clears the VM_LOCKED vma flag and, like mlock_fixup() +munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup() for the munlock case, calls __munlock_vma_pages_range() to walk the page table -for the vma's memory range and munlock_vma_page() each resident page mapped by -the vma. This effectively munlocks the page, only if this is the last -VM_LOCKED vma that maps the page. - +for the VMA's memory range and munlock_vma_page() each resident page mapped by +the VMA. This effectively munlocks the page, only if this is the last +VM_LOCKED VMA that maps the page. -Mlocked Page: try_to_unmap() -[Note: the code changes represented by this section are really quite small -compared to the text to describe what happening and why, and to discuss the -implications.] +try_to_unmap() +-------------- -Pages can, of course, be mapped into multiple vmas. Some of these vmas may +Pages can, of course, be mapped into multiple VMAs. Some of these VMAs may have VM_LOCKED flag set. It is possible for a page mapped into one or more -VM_LOCKED vmas not to have the PG_mlocked flag set and therefore reside on one -of the active or inactive LRU lists. This could happen if, for example, a -task in the process of munlock()ing the page could not isolate the page from -the LRU. As a result, vmscan/shrink_page_list() might encounter such a page -as described in "Unevictable Pages and Vmscan [shrink_*_list()]". To -handle this situation, try_to_unmap() has been enhanced to check for VM_LOCKED -vmas while it is walking a page's reverse map. +VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one +of the active or inactive LRU lists. This could happen if, for example, a task +in the process of munlocking the page could not isolate the page from the LRU. +As a result, vmscan/shrink_page_list() might encounter such a page as described +in section "vmscan's handling of unevictable pages". To handle this situation, +try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse +map. try_to_unmap() is always called, by either vmscan for reclaim or for page -migration, with the argument page locked and isolated from the LRU. BUG_ON() -assertions enforce this requirement. Separate functions handle anonymous and -mapped file pages, as these types of pages have different reverse map -mechanisms. - - try_to_unmap_anon() - -To unmap anonymous pages, each vma in the list anchored in the anon_vma must be -visited--at least until a VM_LOCKED vma is encountered. If the page is being -unmapped for migration, VM_LOCKED vmas do not stop the process because mlocked -pages are migratable. However, for reclaim, if the page is mapped into a -VM_LOCKED vma, the scan stops. try_to_unmap() attempts to acquire the mmap -semphore of the mm_struct to which the vma belongs in read mode. If this is -successful, try_to_unmap() will mlock the page via mlock_vma_page()--we -wouldn't have gotten to try_to_unmap() if the page were already mlocked--and -will return SWAP_MLOCK, indicating that the page is unevictable. If the -mmap semaphore cannot be acquired, we are not sure whether the page is really -unevictable or not. In this case, try_to_unmap() will return SWAP_AGAIN. - - try_to_unmap_file() -- linear mappings - -Unmapping of a mapped file page works the same, except that the scan visits -all vmas that maps the page's index/page offset in the page's mapping's -reverse map priority search tree. It must also visit each vma in the page's -mapping's non-linear list, if the list is non-empty. As for anonymous pages, -on encountering a VM_LOCKED vma for a mapped file page, try_to_unmap() will -attempt to acquire the associated mm_struct's mmap semaphore to mlock the page, -returning SWAP_MLOCK if this is successful, and SWAP_AGAIN, if not. - - try_to_unmap_file() -- non-linear mappings - -If a page's mapping contains a non-empty non-linear mapping vma list, then -try_to_un{map|lock}() must also visit each vma in that list to determine -whether the page is mapped in a VM_LOCKED vma. Again, the scan must visit -all vmas in the non-linear list to ensure that the pages is not/should not be -mlocked. If a VM_LOCKED vma is found in the list, the scan could terminate. -However, there is no easy way to determine whether the page is actually mapped -in a given vma--either for unmapping or testing whether the VM_LOCKED vma -actually pins the page. - -So, try_to_unmap_file() handles non-linear mappings by scanning a certain -number of pages--a "cluster"--in each non-linear vma associated with the page's -mapping, for each file mapped page that vmscan tries to unmap. If this happens -to unmap the page we're trying to unmap, try_to_unmap() will notice this on -return--(page_mapcount(page) == 0)--and return SWAP_SUCCESS. Otherwise, it -will return SWAP_AGAIN, causing vmscan to recirculate this page. We take -advantage of the cluster scan in try_to_unmap_cluster() as follows: - -For each non-linear vma, try_to_unmap_cluster() attempts to acquire the mmap -semaphore of the associated mm_struct for read without blocking. If this -attempt is successful and the vma is VM_LOCKED, try_to_unmap_cluster() will -retain the mmap semaphore for the scan; otherwise it drops it here. Then, -for each page in the cluster, if we're holding the mmap semaphore for a locked -vma, try_to_unmap_cluster() calls mlock_vma_page() to mlock the page. This -call is a no-op if the page is already locked, but will mlock any pages in -the non-linear mapping that happen to be unlocked. If one of the pages so -mlocked is the page passed in to try_to_unmap(), try_to_unmap_cluster() will -return SWAP_MLOCK, rather than the default SWAP_AGAIN. This will allow vmscan -to cull the page, rather than recirculating it on the inactive list. Again, -if try_to_unmap_cluster() cannot acquire the vma's mmap sem, it returns -SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED vma, but -couldn't be mlocked. - - -Mlocked pages: try_to_munlock() Reverse Map Scan - -TODO/FIXME: a better name might be page_mlocked()--analogous to the -page_referenced() reverse map walker. - -When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall() -System Call Handling" above--tries to munlock a page, it needs to -determine whether or not the page is mapped by any VM_LOCKED vma, without -actually attempting to unmap all ptes from the page. For this purpose, the -unevictable/mlock infrastructure introduced a variant of try_to_unmap() called -try_to_munlock(). +migration, with the argument page locked and isolated from the LRU. Separate +functions handle anonymous and mapped file pages, as these types of pages have +different reverse map mechanisms. + + (*) try_to_unmap_anon() + + To unmap anonymous pages, each VMA in the list anchored in the anon_vma + must be visited - at least until a VM_LOCKED VMA is encountered. If the + page is being unmapped for migration, VM_LOCKED VMAs do not stop the + process because mlocked pages are migratable. However, for reclaim, if + the page is mapped into a VM_LOCKED VMA, the scan stops. + + try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of + the mm_struct to which the VMA belongs. If this is successful, it will + mlock the page via mlock_vma_page() - we wouldn't have gotten to + try_to_unmap_anon() if the page were already mlocked - and will return + SWAP_MLOCK, indicating that the page is unevictable. + + If the mmap semaphore cannot be acquired, we are not sure whether the page + is really unevictable or not. In this case, try_to_unmap_anon() will + return SWAP_AGAIN. + + (*) try_to_unmap_file() - linear mappings + + Unmapping of a mapped file page works the same as for anonymous mappings, + except that the scan visits all VMAs that map the page's index/page offset + in the page's mapping's reverse map priority search tree. It also visits + each VMA in the page's mapping's non-linear list, if the list is + non-empty. + + As for anonymous pages, on encountering a VM_LOCKED VMA for a mapped file + page, try_to_unmap_file() will attempt to acquire the associated + mm_struct's mmap semaphore to mlock the page, returning SWAP_MLOCK if this + is successful, and SWAP_AGAIN, if not. + + (*) try_to_unmap_file() - non-linear mappings + + If a page's mapping contains a non-empty non-linear mapping VMA list, then + try_to_un{map|lock}() must also visit each VMA in that list to determine + whether the page is mapped in a VM_LOCKED VMA. Again, the scan must visit + all VMAs in the non-linear list to ensure that the pages is not/should not + be mlocked. + + If a VM_LOCKED VMA is found in the list, the scan could terminate. + However, there is no easy way to determine whether the page is actually + mapped in a given VMA - either for unmapping or testing whether the + VM_LOCKED VMA actually pins the page. + + try_to_unmap_file() handles non-linear mappings by scanning a certain + number of pages - a "cluster" - in each non-linear VMA associated with the + page's mapping, for each file mapped page that vmscan tries to unmap. If + this happens to unmap the page we're trying to unmap, try_to_unmap() will + notice this on return (page_mapcount(page) will be 0) and return + SWAP_SUCCESS. Otherwise, it will return SWAP_AGAIN, causing vmscan to + recirculate this page. We take advantage of the cluster scan in + try_to_unmap_cluster() as follows: + + For each non-linear VMA, try_to_unmap_cluster() attempts to acquire the + mmap semaphore of the associated mm_struct for read without blocking. + + If this attempt is successful and the VMA is VM_LOCKED, + try_to_unmap_cluster() will retain the mmap semaphore for the scan; + otherwise it drops it here. + + Then, for each page in the cluster, if we're holding the mmap semaphore + for a locked VMA, try_to_unmap_cluster() calls mlock_vma_page() to + mlock the page. This call is a no-op if the page is already locked, + but will mlock any pages in the non-linear mapping that happen to be + unlocked. + + If one of the pages so mlocked is the page passed in to try_to_unmap(), + try_to_unmap_cluster() will return SWAP_MLOCK, rather than the default + SWAP_AGAIN. This will allow vmscan to cull the page, rather than + recirculating it on the inactive list. + + Again, if try_to_unmap_cluster() cannot acquire the VMA's mmap sem, it + returns SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED + VMA, but couldn't be mlocked. + + +try_to_munlock() REVERSE MAP SCAN +--------------------------------- + + [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the + page_referenced() reverse map walker. + +When munlock_vma_page() [see section "munlock()/munlockall() System Call +Handling" above] tries to munlock a page, it needs to determine whether or not +the page is mapped by any VM_LOCKED VMA without actually attempting to unmap +all PTEs from the page. For this purpose, the unevictable/mlock infrastructure +introduced a variant of try_to_unmap() called try_to_munlock(). try_to_munlock() calls the same functions as try_to_unmap() for anonymous and mapped file pages with an additional argument specifing unlock versus unmap processing. Again, these functions walk the respective reverse maps looking -for VM_LOCKED vmas. When such a vma is found for anonymous pages and file +for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file pages mapped in linear VMAs, as in the try_to_unmap() case, the functions attempt to acquire the associated mmap semphore, mlock the page via mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the pre-clearing of the page's PG_mlocked done by munlock_vma_page. -If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap -semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() -to recycle the page on the inactive list and hope that it has better luck -with the page next time. - -For file pages mapped into non-linear vmas, the try_to_munlock() logic works -slightly differently. On encountering a VM_LOCKED non-linear vma that might -map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking -the page. munlock_vma_page() will just leave the page unlocked and let -vmscan deal with it--the usual fallback position. - -Note that try_to_munlock()'s reverse map walk must visit every vma in a pages' -reverse map to determine that a page is NOT mapped into any VM_LOCKED vma. -However, the scan can terminate when it encounters a VM_LOCKED vma and can -successfully acquire the vma's mmap semphore for read and mlock the page. -Although try_to_munlock() can be called many [very many!] times when -munlock()ing a large region or tearing down a large address space that has been -mlocked via mlockall(), overall this is a fairly rare event. - -Mlocked Page: Page Reclaim in shrink_*_list() - -shrink_active_list() culls any obviously unevictable pages--i.e., -!page_evictable(page, NULL)--diverting these to the unevictable lru -list. However, shrink_active_list() only sees unevictable pages that -made it onto the active/inactive lru lists. Note that these pages do not -have PageUnevictable set--otherwise, they would be on the unevictable list and -shrink_active_list would never see them. +If try_to_unmap() is unable to acquire a VM_LOCKED VMA's associated mmap +semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() to +recycle the page on the inactive list and hope that it has better luck with the +page next time. + +For file pages mapped into non-linear VMAs, the try_to_munlock() logic works +slightly differently. On encountering a VM_LOCKED non-linear VMA that might +map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking the +page. munlock_vma_page() will just leave the page unlocked and let vmscan deal +with it - the usual fallback position. + +Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's +reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA. +However, the scan can terminate when it encounters a VM_LOCKED VMA and can +successfully acquire the VMA's mmap semphore for read and mlock the page. +Although try_to_munlock() might be called a great many times when munlocking a +large region or tearing down a large address space that has been mlocked via +mlockall(), overall this is a fairly rare event. + + +PAGE RECLAIM IN shrink_*_list() +------------------------------- + +shrink_active_list() culls any obviously unevictable pages - i.e. +!page_evictable(page, NULL) - diverting these to the unevictable list. +However, shrink_active_list() only sees unevictable pages that made it onto the +active/inactive lru lists. Note that these pages do not have PageUnevictable +set - otherwise they would be on the unevictable list and shrink_active_list +would never see them. Some examples of these unevictable pages on the LRU lists are: -1) ramfs pages that have been placed on the lru lists when first allocated. + (1) ramfs pages that have been placed on the LRU lists when first allocated. + + (2) SHM_LOCK'd shared memory pages. shmctl(SHM_LOCK) does not attempt to + allocate or fault in the pages in the shared memory region. This happens + when an application accesses the page the first time after SHM_LOCK'ing + the segment. -2) SHM_LOCKed shared memory pages. shmctl(SHM_LOCK) does not attempt to - allocate or fault in the pages in the shared memory region. This happens - when an application accesses the page the first time after SHM_LOCKing - the segment. + (3) mlocked pages that could not be isolated from the LRU and moved to the + unevictable list in mlock_vma_page(). -3) Mlocked pages that could not be isolated from the lru and moved to the - unevictable list in mlock_vma_page(). + (4) Pages mapped into multiple VM_LOCKED VMAs, but try_to_munlock() couldn't + acquire the VMA's mmap semaphore to test the flags and set PageMlocked. + munlock_vma_page() was forced to let the page back on to the normal LRU + list for vmscan to handle. -3) Pages mapped into multiple VM_LOCKED vmas, but try_to_munlock() couldn't - acquire the vma's mmap semaphore to test the flags and set PageMlocked. - munlock_vma_page() was forced to let the page back on to the normal - LRU list for vmscan to handle. +shrink_inactive_list() also diverts any unevictable pages that it finds on the +inactive lists to the appropriate zone's unevictable list. -shrink_inactive_list() also culls any unevictable pages that it finds on -the inactive lists, again diverting them to the appropriate zone's unevictable -lru list. shrink_inactive_list() should only see SHM_LOCKed pages that became -SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or -pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from -the lru to recheck via try_to_munlock(). shrink_inactive_list() won't notice -the latter, but will pass on to shrink_page_list(). +shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd +after shrink_active_list() had moved them to the inactive list, or pages mapped +into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to +recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter, +but will pass on to shrink_page_list(). shrink_page_list() again culls obviously unevictable pages that it could encounter for similar reason to shrink_inactive_list(). Pages mapped into -VM_LOCKED vmas but without PG_mlocked set will make it all the way to +VM_LOCKED VMAs but without PG_mlocked set will make it all the way to try_to_unmap(). shrink_page_list() will divert them to the unevictable list when try_to_unmap() returns SWAP_MLOCK, as discussed above. -- cgit v0.10.2 From 7b102d034c0affc6ee703b576f2496ec6cb81d79 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 13 Apr 2009 14:40:02 -0700 Subject: MAINTAINERS: bluesmoke-devel list is moderated for non-subscribers Signed-off-by: Jean Delvare Acked-by: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 00ca615..fbdb809 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1894,7 +1894,7 @@ F: fs/ecryptfs/ EDAC-CORE P: Doug Thompson M: dougthompson@xmission.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Supported F: Documentation/edac.txt @@ -1906,7 +1906,7 @@ P: Mark Gross P: Doug Thompson M: mark.gross@intel.com M: dougthompson@xmission.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/e752x_edac.c @@ -1914,7 +1914,7 @@ F: drivers/edac/e752x_edac.c EDAC-E7XXX P: Doug Thompson M: dougthompson@xmission.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/e7xxx_edac.c @@ -1922,7 +1922,7 @@ F: drivers/edac/e7xxx_edac.c EDAC-I82443BXGX P: Tim Small M: tim@buttersideup.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i82443bxgx_edac.c @@ -1930,7 +1930,7 @@ F: drivers/edac/i82443bxgx_edac.c EDAC-I3000 P: Jason Uhlenkott M: juhlenko@akamai.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i3000_edac.c @@ -1938,7 +1938,7 @@ F: drivers/edac/i3000_edac.c EDAC-I5000 P: Doug Thompson M: dougthompson@xmission.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i5000_edac.c @@ -1946,7 +1946,7 @@ F: drivers/edac/i5000_edac.c EDAC-I5400 P: Mauro Carvalho Chehab M: mchehab@redhat.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i5400_edac.c @@ -1956,7 +1956,7 @@ P: Ranganathan Desikan P: Arvind R. M: rdesikan@jetzbroadband.com M: arvind@acarlab.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i82975x_edac.c @@ -1964,7 +1964,7 @@ F: drivers/edac/i82975x_edac.c EDAC-PASEMI P: Egor Martovetsky M: egor@pasemi.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/pasemi_edac.c @@ -1972,7 +1972,7 @@ F: drivers/edac/pasemi_edac.c EDAC-R82600 P: Tim Small M: tim@buttersideup.com -L: bluesmoke-devel@lists.sourceforge.net +L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/r82600_edac.c -- cgit v0.10.2 From f1671f6d783a2385d32e11f456cbe32f0e4b4b49 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 13 Apr 2009 14:40:03 -0700 Subject: ptrace: fix exit_ptrace() vs ptrace_traceme() race Pointed out by Roland. The bug was recently introduced by me in "forget_original_parent: split out the un-ptrace part", commit 39c626ae47c469abdfd30c6e42eff884931380d6. Since that patch we have a window after exit_ptrace() drops tasklist and before forget_original_parent() takes it again. In this window the child can do ptrace(PTRACE_TRACEME) and nobody can untrace this child after that. Change ptrace_traceme() to not attach to the exiting ->real_parent. We don't report the error in this case, we pretend we attach right before ->real_parent calls exit_ptrace() which should untrace us anyway. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 64191fa..dfcd83c 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -604,10 +604,11 @@ repeat: ret = security_ptrace_traceme(current->parent); /* - * Set the ptrace bit in the process ptrace flags. - * Then link us on our parent's ptraced list. + * Check PF_EXITING to ensure ->real_parent has not passed + * exit_ptrace(). Otherwise we don't report the error but + * pretend ->real_parent untraces us right after return. */ - if (!ret) { + if (!ret && !(current->real_parent->flags & PF_EXITING)) { current->ptrace |= PT_PTRACED; __ptrace_link(current, current->real_parent); } -- cgit v0.10.2 From d20d5a7456d57d8affa88f45f27ae96ea49c29e4 Mon Sep 17 00:00:00 2001 From: Randy Robertson Date: Mon, 13 Apr 2009 14:40:04 -0700 Subject: initramfs: fix initramfs to work with hardlinked init Change cb6ff208076b5f434db1b8c983429269d719cef5 ("NOMMU: Support XIP on initramfs") seems to have broken booting from initramfs with /sbin/init being a hardlink. It seems like the logic required for XIP on nommu, i.e. ftruncate to reported cpio header file size (body_len) is broken for hardlinks, which have a reported size of 0, and the truncate thus nukes the contents of the file (in my case busybox), making boot impossible and ending with runaway loop modprobe binfmt-0000 - and of course 0000 is not a valid binary format. My fix is to only call ftruncate if size is non-zero which fixes things for me, but I'm not certain whether this will break XIP for those files on nommu systems, although I would guess not. Signed-off-by: Randy Robertson Acked-by: David Howells Acked-by: Paul Mundt Acked-by: H. Peter Anvin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/init/initramfs.c b/init/initramfs.c index e44f2d9..9ee7b78 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -310,7 +310,8 @@ static int __init do_name(void) if (wfd >= 0) { sys_fchown(wfd, uid, gid); sys_fchmod(wfd, mode); - sys_ftruncate(wfd, body_len); + if (body_len) + sys_ftruncate(wfd, body_len); vcollected = kstrdup(collected, GFP_KERNEL); state = CopyFile; } -- cgit v0.10.2 From 9de100d001564f58c3fb2ec1bd03e540ac0aa357 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Mon, 13 Apr 2009 14:40:05 -0700 Subject: mm: document get_user_pages_fast() While better than get_user_pages(), the usage of gupf(), especially the return values and the fact that it can potentially only partially pin the range, warranted some documentation. Signed-off-by: Andy Grover Cc: Ingo Molnar Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/util.c b/mm/util.c index 2599e83..55bef16 100644 --- a/mm/util.c +++ b/mm/util.c @@ -223,6 +223,22 @@ void arch_pick_mmap_layout(struct mm_struct *mm) } #endif +/** + * get_user_pages_fast() - pin user pages in memory + * @start: starting user address + * @nr_pages: number of pages from start to pin + * @write: whether pages will be written to + * @pages: array that receives pointers to the pages pinned. + * Should be at least nr_pages long. + * + * Attempt to pin user pages in memory without taking mm->mmap_sem. + * If not successful, it will fall back to taking the lock and + * calling get_user_pages(). + * + * Returns number of pages pinned. This may be fewer than the number + * requested. If nr_pages is 0 or negative, returns 0. If no pages + * were pinned, returns -errno. + */ int __attribute__((weak)) get_user_pages_fast(unsigned long start, int nr_pages, int write, struct page **pages) { -- cgit v0.10.2 From 32433879480d13bc019d5a067ce884064a93dd63 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 Apr 2009 14:40:06 -0700 Subject: jbd: update locking coments Update information about locking in JBD revoke code. Reported-by: Lin Tan . Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c index c7bd649..3e9afc2 100644 --- a/fs/jbd/revoke.c +++ b/fs/jbd/revoke.c @@ -55,6 +55,25 @@ * need do nothing. * RevokeValid set, Revoked set: * buffer has been revoked. + * + * Locking rules: + * We keep two hash tables of revoke records. One hashtable belongs to the + * running transaction (is pointed to by journal->j_revoke), the other one + * belongs to the committing transaction. Accesses to the second hash table + * happen only from the kjournald and no other thread touches this table. Also + * journal_switch_revoke_table() which switches which hashtable belongs to the + * running and which to the committing transaction is called only from + * kjournald. Therefore we need no locks when accessing the hashtable belonging + * to the committing transaction. + * + * All users operating on the hash table belonging to the running transaction + * have a handle to the transaction. Therefore they are safe from kjournald + * switching hash tables under them. For operations on the lists of entries in + * the hash table j_revoke_lock is used. + * + * Finally, also replay code uses the hash tables but at this moment noone else + * can touch them (filesystem isn't mounted yet) and hence no locking is + * needed. */ #ifndef __KERNEL__ @@ -402,8 +421,6 @@ int journal_revoke(handle_t *handle, unsigned long blocknr, * the second time we would still have a pending revoke to cancel. So, * do not trust the Revoked bit on buffers unless RevokeValid is also * set. - * - * The caller must have the journal locked. */ int journal_cancel_revoke(handle_t *handle, struct journal_head *jh) { @@ -481,10 +498,7 @@ void journal_switch_revoke_table(journal_t *journal) /* * Write revoke records to the journal for all entries in the current * revoke hash, deleting the entries as we go. - * - * Called with the journal lock held. */ - void journal_write_revoke_records(journal_t *journal, transaction_t *transaction) { -- cgit v0.10.2 From 280ca299dea58180a59ec4b146595211b280f598 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 13 Apr 2009 14:40:06 -0700 Subject: at24: make input buffers of at24_*write() const | drivers/misc/eeprom/at24.c:508: warning: assignment from incompatible pointer type Signed-off-by: Geert Uytterhoeven Cc: Kevin Hilman Cc: David Brownell Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index d184dfa..db39f4a 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -278,7 +278,7 @@ static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr, * We only use page mode writes; the alternative is sloooow. This routine * writes at most one page. */ -static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf, +static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf, unsigned offset, size_t count) { struct i2c_client *client; @@ -347,8 +347,8 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf, return -ETIMEDOUT; } -static ssize_t at24_write(struct at24_data *at24, - char *buf, loff_t off, size_t count) +static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, + size_t count) { ssize_t retval = 0; @@ -406,7 +406,7 @@ static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf, return at24_read(at24, buf, offset, count); } -static ssize_t at24_macc_write(struct memory_accessor *macc, char *buf, +static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf, off_t offset, size_t count) { struct at24_data *at24 = container_of(macc, struct at24_data, macc); -- cgit v0.10.2 From 4cafbd0b94d2c8cae6ede6d1c3ab90547547a3d2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 13 Apr 2009 14:40:07 -0700 Subject: at25: make input buffers of at25_*write() const | drivers/misc/eeprom/at25.c:358: warning: assignment from incompatible pointer type Signed-off-by: Geert Uytterhoeven Cc: Kevin Hilman Cc: David Brownell Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index 6bc0dac..b34cb5f 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -140,7 +140,8 @@ at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr, static ssize_t -at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count) +at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, + size_t count) { ssize_t status = 0; unsigned written = 0; @@ -276,7 +277,7 @@ static ssize_t at25_mem_read(struct memory_accessor *mem, char *buf, return at25_ee_read(at25, buf, offset, count); } -static ssize_t at25_mem_write(struct memory_accessor *mem, char *buf, +static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf, off_t offset, size_t count) { struct at25_data *at25 = container_of(mem, struct at25_data, mem); -- cgit v0.10.2 From 3d26dcf7679c5cc6c9f3b95ffdb2152fba2b7fae Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 13 Apr 2009 14:40:08 -0700 Subject: kernel/sys.c: clean up sys_shutdown exit path Impact: cleanup, fix Clean up sys_shutdown() exit path. Factor out common code. Return correct error code instead of always 0 on failure. Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/sys.c b/kernel/sys.c index 51dbb55..e7998cf 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -360,6 +360,7 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd, void __user *, arg) { char buffer[256]; + int ret = 0; /* We only trust the superuser with rebooting the system. */ if (!capable(CAP_SYS_BOOT)) @@ -397,7 +398,7 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd, kernel_halt(); unlock_kernel(); do_exit(0); - break; + panic("cannot halt"); case LINUX_REBOOT_CMD_POWER_OFF: kernel_power_off(); @@ -417,29 +418,22 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd, #ifdef CONFIG_KEXEC case LINUX_REBOOT_CMD_KEXEC: - { - int ret; - ret = kernel_kexec(); - unlock_kernel(); - return ret; - } + ret = kernel_kexec(); + break; #endif #ifdef CONFIG_HIBERNATION case LINUX_REBOOT_CMD_SW_SUSPEND: - { - int ret = hibernate(); - unlock_kernel(); - return ret; - } + ret = hibernate(); + break; #endif default: - unlock_kernel(); - return -EINVAL; + ret = -EINVAL; + break; } unlock_kernel(); - return 0; + return ret; } static void deferred_cad(struct work_struct *dummy) -- cgit v0.10.2 From a8031cb00e286600ea08bd00a6812dbfec412376 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Mon, 13 Apr 2009 14:40:08 -0700 Subject: memcg: remove warning when CONFIG_DEBUG_VM=n mm/memcontrol.c:318: warning: `mem_cgroup_is_obsolete' defined but not used [akpm@linux-foundation.org: simplify as suggested by Balbir] Signed-off-by: KAMEZAWA Hiroyuki Reviewed-by: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 2fc6d6c..e44fb0f 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -932,7 +932,7 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm, if (unlikely(!mem)) return 0; - VM_BUG_ON(mem_cgroup_is_obsolete(mem)); + VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem)); while (1) { int ret; -- cgit v0.10.2 From a55ce6dc705c9ed0bb0d4f629dbcaf3b3ced5172 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 13 Apr 2009 14:40:09 -0700 Subject: mm: add documentation describing what tsk->active_mm means vs tsk->mm I'm sure everyone knows this, but I didn't, so I googled it, and found a nice explanation from Linus. Might be worth sticking in Documentation. Signed-off-by: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX index 2131b00..2f77ced 100644 --- a/Documentation/vm/00-INDEX +++ b/Documentation/vm/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - this file. +active_mm.txt + - An explanation from Linus about tsk->active_mm vs tsk->mm. balance - various information on memory balancing. hugetlbpage.txt diff --git a/Documentation/vm/active_mm.txt b/Documentation/vm/active_mm.txt new file mode 100644 index 0000000..4ee1f64 --- /dev/null +++ b/Documentation/vm/active_mm.txt @@ -0,0 +1,83 @@ +List: linux-kernel +Subject: Re: active_mm +From: Linus Torvalds +Date: 1999-07-30 21:36:24 + +Cc'd to linux-kernel, because I don't write explanations all that often, +and when I do I feel better about more people reading them. + +On Fri, 30 Jul 1999, David Mosberger wrote: +> +> Is there a brief description someplace on how "mm" vs. "active_mm" in +> the task_struct are supposed to be used? (My apologies if this was +> discussed on the mailing lists---I just returned from vacation and +> wasn't able to follow linux-kernel for a while). + +Basically, the new setup is: + + - we have "real address spaces" and "anonymous address spaces". The + difference is that an anonymous address space doesn't care about the + user-level page tables at all, so when we do a context switch into an + anonymous address space we just leave the previous address space + active. + + The obvious use for a "anonymous address space" is any thread that + doesn't need any user mappings - all kernel threads basically fall into + this category, but even "real" threads can temporarily say that for + some amount of time they are not going to be interested in user space, + and that the scheduler might as well try to avoid wasting time on + switching the VM state around. Currently only the old-style bdflush + sync does that. + + - "tsk->mm" points to the "real address space". For an anonymous process, + tsk->mm will be NULL, for the logical reason that an anonymous process + really doesn't _have_ a real address space at all. + + - however, we obviously need to keep track of which address space we + "stole" for such an anonymous user. For that, we have "tsk->active_mm", + which shows what the currently active address space is. + + The rule is that for a process with a real address space (ie tsk->mm is + non-NULL) the active_mm obviously always has to be the same as the real + one. + + For a anonymous process, tsk->mm == NULL, and tsk->active_mm is the + "borrowed" mm while the anonymous process is running. When the + anonymous process gets scheduled away, the borrowed address space is + returned and cleared. + +To support all that, the "struct mm_struct" now has two counters: a +"mm_users" counter that is how many "real address space users" there are, +and a "mm_count" counter that is the number of "lazy" users (ie anonymous +users) plus one if there are any real users. + +Usually there is at least one real user, but it could be that the real +user exited on another CPU while a lazy user was still active, so you do +actually get cases where you have a address space that is _only_ used by +lazy users. That is often a short-lived state, because once that thread +gets scheduled away in favour of a real thread, the "zombie" mm gets +released because "mm_users" becomes zero. + +Also, a new rule is that _nobody_ ever has "init_mm" as a real MM any +more. "init_mm" should be considered just a "lazy context when no other +context is available", and in fact it is mainly used just at bootup when +no real VM has yet been created. So code that used to check + + if (current->mm == &init_mm) + +should generally just do + + if (!current->mm) + +instead (which makes more sense anyway - the test is basically one of "do +we have a user context", and is generally done by the page fault handler +and things like that). + +Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago, +because it slightly changes the interfaces to accomodate the alpha (who +would have thought it, but the alpha actually ends up having one of the +ugliest context switch codes - unlike the other architectures where the MM +and register state is separate, the alpha PALcode joins the two, and you +need to switch both together). + +(From http://marc.info/?l=linux-kernel&m=93337278602211&w=2) -- cgit v0.10.2 From 347486bb108fa6e0fd2753c1be3519d6be2516ed Mon Sep 17 00:00:00 2001 From: Stefan Husemann Date: Mon, 13 Apr 2009 14:40:10 -0700 Subject: intelfb: support i854 Support the Intel 854 Chipset in fbdev. We test and use the patch on a Thomson IP1101 IPTV-Box. On the VGA-Port we get a normal signal. Here is the link to the Mambux-Project: http://www.mambux.de Cc: Keith Packard Cc: Dave Airlie Cc: Krzysztof Helt Signed-off-by: Stefan Husemann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 9d9490e..3686912 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -2131,6 +2131,8 @@ static const struct intel_driver_description { { PCI_DEVICE_ID_INTEL_82845G_HB, PCI_DEVICE_ID_INTEL_82845G_IG, 0, "830M", &intel_845_driver, &intel_830_driver }, { PCI_DEVICE_ID_INTEL_82850_HB, 0, 0, "i850", &intel_850_driver, NULL }, + { PCI_DEVICE_ID_INTEL_82854_HB, PCI_DEVICE_ID_INTEL_82854_IG, 0, "854", + &intel_845_driver, &intel_830_driver }, { PCI_DEVICE_ID_INTEL_82855PM_HB, 0, 0, "855PM", &intel_845_driver, NULL }, { PCI_DEVICE_ID_INTEL_82855GM_HB, PCI_DEVICE_ID_INTEL_82855GM_IG, 0, "855GM", &intel_845_driver, &intel_830_driver }, @@ -2355,6 +2357,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_82845_HB), ID(PCI_DEVICE_ID_INTEL_82845G_HB), ID(PCI_DEVICE_ID_INTEL_82850_HB), + ID(PCI_DEVICE_ID_INTEL_82854_HB), ID(PCI_DEVICE_ID_INTEL_82855PM_HB), ID(PCI_DEVICE_ID_INTEL_82855GM_HB), ID(PCI_DEVICE_ID_INTEL_82860_HB), diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/intelfb/intelfb.h index a50bea6..4098455 100644 --- a/drivers/video/intelfb/intelfb.h +++ b/drivers/video/intelfb/intelfb.h @@ -53,6 +53,7 @@ #define PCI_DEVICE_ID_INTEL_830M 0x3577 #define PCI_DEVICE_ID_INTEL_845G 0x2562 #define PCI_DEVICE_ID_INTEL_85XGM 0x3582 +#define PCI_DEVICE_ID_INTEL_854 0x358E #define PCI_DEVICE_ID_INTEL_865G 0x2572 #define PCI_DEVICE_ID_INTEL_915G 0x2582 #define PCI_DEVICE_ID_INTEL_915GM 0x2592 @@ -154,6 +155,7 @@ enum intel_chips { INTEL_85XGM, INTEL_852GM, INTEL_852GME, + INTEL_854, INTEL_855GM, INTEL_855GME, INTEL_865G, diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index b306549..487f2be 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -156,6 +156,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo) switch(dinfo->chipset) { case INTEL_830M: case INTEL_845G: + case INTEL_854: case INTEL_855GM: case INTEL_865G: dinfo->output[i].type = INTELFB_OUTPUT_DVO; diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 6d8e541..ace14fe 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -182,6 +182,7 @@ static struct pci_device_id intelfb_pci_table[] __devinitdata = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G }, diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c index 8b26b27..0689f97 100644 --- a/drivers/video/intelfb/intelfbhw.c +++ b/drivers/video/intelfb/intelfbhw.c @@ -84,6 +84,11 @@ int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo) dinfo->mobile = 0; dinfo->pll_index = PLLS_I8xx; return 0; + case PCI_DEVICE_ID_INTEL_854: + dinfo->mobile = 1; + dinfo->name = "Intel(R) 854"; + dinfo->chipset = INTEL_854; + return 0; case PCI_DEVICE_ID_INTEL_85XGM: tmp = 0; dinfo->mobile = 1; diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 2df74eb..9477af0 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -472,6 +472,7 @@ {0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x358e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} #define gamma_PCI_IDS \ @@ -533,4 +534,5 @@ {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0, 0, 0} diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ee98cd5..06ba90c 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2514,6 +2514,8 @@ #define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433 #define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 #define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 +#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c +#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e #define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 #define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582 #define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590 -- cgit v0.10.2 From 61609d01cbb3ab865c8cccaf85e6837c47096480 Mon Sep 17 00:00:00 2001 From: Yuri Tikhonov Date: Mon, 13 Apr 2009 14:40:11 -0700 Subject: shmem: fix division by zero Fix a division by zero which we have in shmem_truncate_range() and shmem_unuse_inode() when using big PAGE_SIZE values (e.g. 256kB on ppc44x). With 256kB PAGE_SIZE, the ENTRIES_PER_PAGEPAGE constant becomes too large (0x1.0000.0000) on a 32-bit kernel, so this patch just changes its type from 'unsigned long' to 'unsigned long long'. Hugh: reverted its unsigned long longs in shmem_truncate_range() and shmem_getpage(): the pagecache index cannot be more than an unsigned long, so the divisions by zero occurred in unreached code. It's a pity we need any ULL arithmetic here, but I found no pretty way to avoid it. Signed-off-by: Yuri Tikhonov Signed-off-by: Hugh Dickins Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/shmem.c b/mm/shmem.c index d94d2e9..28024ce 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -66,7 +66,7 @@ static struct vfsmount *shm_mnt; #include #define ENTRIES_PER_PAGE (PAGE_CACHE_SIZE/sizeof(unsigned long)) -#define ENTRIES_PER_PAGEPAGE (ENTRIES_PER_PAGE*ENTRIES_PER_PAGE) +#define ENTRIES_PER_PAGEPAGE ((unsigned long long)ENTRIES_PER_PAGE*ENTRIES_PER_PAGE) #define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512) #define SHMEM_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1)) -- cgit v0.10.2 From caefba1740d8016e6dfe8fda84f85bdcb8f8c85d Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 13 Apr 2009 14:40:12 -0700 Subject: shmem: respect MAX_LFS_FILESIZE SHMEM_MAX_BYTES was derived from the maximum size of its triple-indirect swap vector, forgetting to take the MAX_LFS_FILESIZE limit into account. Never mind 256kB pages, even 8kB pages on 32-bit kernels allowed files to grow slightly bigger than that supposed maximum. Fix this by using the min of both (at build time not run time). And it happens that this calculation is good as far as 8MB pages on 32-bit or 16MB pages on 64-bit: though SHMSWP_MAX_INDEX gets truncated before that, it's truncated to such large numbers that we don't need to care. [akpm@linux-foundation.org: it needs pagemap.h] [akpm@linux-foundation.org: fix sparc64 min() warnings] Signed-off-by: Hugh Dickins Cc: Yuri Tikhonov Cc: Paul Mackerras Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/shmem.c b/mm/shmem.c index 28024ce..f9cb20e 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -43,7 +44,6 @@ static struct vfsmount *shm_mnt; #include #include #include -#include #include #include #include @@ -65,13 +65,28 @@ static struct vfsmount *shm_mnt; #include #include +/* + * The maximum size of a shmem/tmpfs file is limited by the maximum size of + * its triple-indirect swap vector - see illustration at shmem_swp_entry(). + * + * With 4kB page size, maximum file size is just over 2TB on a 32-bit kernel, + * but one eighth of that on a 64-bit kernel. With 8kB page size, maximum + * file size is just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel, + * MAX_LFS_FILESIZE being then more restrictive than swap vector layout. + * + * We use / and * instead of shifts in the definitions below, so that the swap + * vector can be tested with small even values (e.g. 20) for ENTRIES_PER_PAGE. + */ #define ENTRIES_PER_PAGE (PAGE_CACHE_SIZE/sizeof(unsigned long)) #define ENTRIES_PER_PAGEPAGE ((unsigned long long)ENTRIES_PER_PAGE*ENTRIES_PER_PAGE) -#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512) -#define SHMEM_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1)) -#define SHMEM_MAX_BYTES ((unsigned long long)SHMEM_MAX_INDEX << PAGE_CACHE_SHIFT) +#define SHMSWP_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1)) +#define SHMSWP_MAX_BYTES (SHMSWP_MAX_INDEX << PAGE_CACHE_SHIFT) +#define SHMEM_MAX_BYTES min_t(unsigned long long, SHMSWP_MAX_BYTES, MAX_LFS_FILESIZE) +#define SHMEM_MAX_INDEX ((unsigned long)((SHMEM_MAX_BYTES+1) >> PAGE_CACHE_SHIFT)) + +#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512) #define VM_ACCT(size) (PAGE_CACHE_ALIGN(size) >> PAGE_SHIFT) /* info->flags needs VM_flags to handle pagein/truncate races efficiently */ @@ -2581,7 +2596,7 @@ int shmem_unuse(swp_entry_t entry, struct page *page) #define shmem_get_inode(sb, mode, dev, flags) ramfs_get_inode(sb, mode, dev) #define shmem_acct_size(flags, size) 0 #define shmem_unacct_size(flags, size) do {} while (0) -#define SHMEM_MAX_BYTES LLONG_MAX +#define SHMEM_MAX_BYTES MAX_LFS_FILESIZE #endif /* CONFIG_SHMEM */ -- cgit v0.10.2 From 316cb4ef3eb2ad6e35e15cc56d39c6cda58c093a Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 Apr 2009 14:40:14 -0700 Subject: ext2: fix data corruption for racing writes If two writers allocating blocks to file race with each other (e.g. because writepages races with ordinary write or two writepages race with each other), ext2_getblock() can be called on the same inode in parallel. Before we are going to allocate new blocks, we have to recheck the block chain we have obtained so far without holding truncate_mutex. Otherwise we could overwrite the indirect block pointer set by the other writer leading to data loss. The below test program by Ying is able to reproduce the data loss with ext2 on in BRD in a few minutes if the machine is under memory pressure: long kMemSize = 50 << 20; int kPageSize = 4096; int main(int argc, char **argv) { int status; int count = 0; int i; char *fname = "/mnt/test.mmap"; char *mem; unlink(fname); int fd = open(fname, O_CREAT | O_EXCL | O_RDWR, 0600); status = ftruncate(fd, kMemSize); mem = mmap(0, kMemSize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); // Fill the memory with 1s. memset(mem, 1, kMemSize); sleep(2); for (i = 0; i < kMemSize; i++) { int byte_good = mem[i] != 0; if (!byte_good && ((i % kPageSize) == 0)) { //printf("%d ", i / kPageSize); count++; } } munmap(mem, kMemSize); close(fd); unlink(fname); if (count > 0) { printf("Running %d bad page\n", count); return 1; } return 0; } Cc: Ying Han Cc: Nick Piggin Signed-off-by: Jan Kara Cc: Mingming Cao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c index b43b9556..acf6788 100644 --- a/fs/ext2/inode.c +++ b/fs/ext2/inode.c @@ -590,9 +590,8 @@ static int ext2_get_blocks(struct inode *inode, if (depth == 0) return (err); -reread: - partial = ext2_get_branch(inode, depth, offsets, chain, &err); + partial = ext2_get_branch(inode, depth, offsets, chain, &err); /* Simplest case - block found, no allocation needed */ if (!partial) { first_block = le32_to_cpu(chain[depth - 1].key); @@ -602,15 +601,16 @@ reread: while (count < maxblocks && count <= blocks_to_boundary) { ext2_fsblk_t blk; - if (!verify_chain(chain, partial)) { + if (!verify_chain(chain, chain + depth - 1)) { /* * Indirect block might be removed by * truncate while we were reading it. * Handling of that case: forget what we've * got now, go to reread. */ + err = -EAGAIN; count = 0; - goto changed; + break; } blk = le32_to_cpu(*(chain[depth-1].p + count)); if (blk == first_block + count) @@ -618,7 +618,8 @@ reread: else break; } - goto got_it; + if (err != -EAGAIN) + goto got_it; } /* Next simple case - plain lookup or failed read of indirect block */ @@ -626,6 +627,33 @@ reread: goto cleanup; mutex_lock(&ei->truncate_mutex); + /* + * If the indirect block is missing while we are reading + * the chain(ext3_get_branch() returns -EAGAIN err), or + * if the chain has been changed after we grab the semaphore, + * (either because another process truncated this branch, or + * another get_block allocated this branch) re-grab the chain to see if + * the request block has been allocated or not. + * + * Since we already block the truncate/other get_block + * at this point, we will have the current copy of the chain when we + * splice the branch into the tree. + */ + if (err == -EAGAIN || !verify_chain(chain, partial)) { + while (partial > chain) { + brelse(partial->bh); + partial--; + } + partial = ext2_get_branch(inode, depth, offsets, chain, &err); + if (!partial) { + count++; + mutex_unlock(&ei->truncate_mutex); + if (err) + goto cleanup; + clear_buffer_new(bh_result); + goto got_it; + } + } /* * Okay, we need to do block allocation. Lazily initialize the block @@ -683,12 +711,6 @@ cleanup: partial--; } return err; -changed: - while (partial > chain) { - brelse(partial->bh); - partial--; - } - goto reread; } int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create) -- cgit v0.10.2 From e930438c42e744ef1f8bfdbb338253c9f384df42 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Mon, 13 Apr 2009 14:40:14 -0700 Subject: Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n) This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: Yang Hongyang Cc: Russell King Cc: Tony Lindgren Cc: "David S. Miller" Cc: James Bottomley Cc: Greg KH Cc: Takashi Iwai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index fc74e91..34a56a1 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -131,14 +131,14 @@ static struct musb_hdrc_platform_data musb_plat = { .power = 50, /* up to 100 mA */ }; -static u64 musb_dmamask = DMA_32BIT_MASK; +static u64 musb_dmamask = DMA_BIT_MASK(32); static struct platform_device musb_device = { .name = "musb_hdrc", .id = -1, .dev = { .dma_mask = &musb_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &musb_plat, }, .num_resources = ARRAY_SIZE(musb_resources), @@ -146,14 +146,14 @@ static struct platform_device musb_device = { }; #ifdef CONFIG_NOP_USB_XCEIV -static u64 nop_xceiv_dmamask = DMA_32BIT_MASK; +static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32); static struct platform_device nop_xceiv_device = { .name = "nop_usb_xceiv", .id = -1, .dev = { .dma_mask = &nop_xceiv_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = NULL, }, }; diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c index 573f02c..285aae8 100644 --- a/arch/ia64/kernel/pci-swiotlb.c +++ b/arch/ia64/kernel/pci-swiotlb.c @@ -16,7 +16,7 @@ EXPORT_SYMBOL(swiotlb); static void *ia64_swiotlb_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) { - if (dev->coherent_dma_mask != DMA_64BIT_MASK) + if (dev->coherent_dma_mask != DMA_BIT_MASK(64)) gfp |= GFP_DMA; return swiotlb_alloc_coherent(dev, size, dma_handle, gfp); } diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index be20430..9359613 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -1059,7 +1059,7 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id) goto out; } - err = pci_set_dma_mask(dev, DMA_32BIT_MASK); + err = pci_set_dma_mask(dev, DMA_BIT_MASK(32)); if (err) { dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n"); goto out; diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 0ef6f08..4d4d5e0 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3505,7 +3505,7 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u /* The Inbound Post Queue only accepts 32-bit physical addresses for the CCISS commands, so they must be allocated from the lower 4GiB of memory. */ - err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) { iounmap(vaddr); return -ENOMEM; diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c index deb7b53..83a1212 100644 --- a/drivers/net/atl1c/atl1c_main.c +++ b/drivers/net/atl1c/atl1c_main.c @@ -2532,8 +2532,8 @@ static int __devinit atl1c_probe(struct pci_dev *pdev, * various kernel subsystems to support the mechanics required by a * fixed-high-32-bit system. */ - if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) || - (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) { + if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) || + (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) { dev_err(&pdev->dev, "No usable DMA configuration,aborting\n"); goto err_dma; } diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 9b75aa6..30d0c81 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1821,11 +1821,11 @@ static int __devinit be_probe(struct pci_dev *pdev, be_msix_enable(adapter); - status = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); if (!status) { netdev->features |= NETIF_F_HIGHDMA; } else { - status = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (status) { dev_err(&pdev->dev, "Could not set PCI DMA Mask\n"); goto free_netdev; diff --git a/drivers/net/jme.c b/drivers/net/jme.c index ece3504..621a7c0 100644 --- a/drivers/net/jme.c +++ b/drivers/net/jme.c @@ -2591,13 +2591,13 @@ static int jme_pci_dma64(struct pci_dev *pdev) { if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 && - !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) - if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) + !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) + if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) return 1; if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 && - !pci_set_dma_mask(pdev, DMA_40BIT_MASK)) - if (!pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK)) + !pci_set_dma_mask(pdev, DMA_BIT_MASK(40))) + if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40))) return 1; if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath9k/pci.c index 6dbc585..168411d 100644 --- a/drivers/net/wireless/ath9k/pci.c +++ b/drivers/net/wireless/ath9k/pci.c @@ -93,14 +93,14 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (pci_enable_device(pdev)) return -EIO; - ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (ret) { printk(KERN_ERR "ath9k: 32-bit DMA not available\n"); goto bad; } - ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (ret) { printk(KERN_ERR "ath9k: 32-bit DMA consistent " diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index e3569a0..b1610ea 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -492,8 +492,8 @@ static int __devinit p54p_probe(struct pci_dev *pdev, goto err_disable_dev; } - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || - pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) || + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { dev_err(&pdev->dev, "No suitable DMA available\n"); goto err_free_reg; } diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index fdb14ec..8b7983a 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -2234,10 +2234,10 @@ static int twa_resume(struct pci_dev *pdev) pci_set_master(pdev); pci_try_set_mwi(pdev); - if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) - || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) - || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume"); retval = -ENODEV; goto out_disable_device; diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 280261c..2a88985 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1378,7 +1378,7 @@ int aac_get_adapter_info(struct aac_dev* dev) if (dev->nondasd_support && !dev->in_reset) printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id); - if (dma_get_required_mask(&dev->pdev->dev) > DMA_32BIT_MASK) + if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32)) dev->needs_dac = 1; dev->dac_support = 0; if ((sizeof(dma_addr_t) > 4) && dev->needs_dac && diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 52427a8..a91f514 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -855,9 +855,9 @@ _base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev) if (sizeof(dma_addr_t) > 4) { const uint64_t required_mask = dma_get_required_mask(&pdev->dev); - if ((required_mask > DMA_32BIT_MASK) && !pci_set_dma_mask(pdev, - DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev, - DMA_64BIT_MASK)) { + if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev, + DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev, + DMA_BIT_MASK(64))) { ioc->base_add_sg_single = &_base_add_sg_single_64; ioc->sge_size = sizeof(Mpi2SGESimple64_t); desc = "64"; @@ -865,8 +865,8 @@ _base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev) } } - if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK) - && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) + && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { ioc->base_add_sg_single = &_base_add_sg_single_32; ioc->sge_size = sizeof(Mpi2SGESimple32_t); desc = "32"; diff --git a/drivers/staging/b3dfg/b3dfg.c b/drivers/staging/b3dfg/b3dfg.c index 0348072..75ebe33 100644 --- a/drivers/staging/b3dfg/b3dfg.c +++ b/drivers/staging/b3dfg/b3dfg.c @@ -1000,7 +1000,7 @@ static int __devinit b3dfg_probe(struct pci_dev *pdev, pci_set_master(pdev); - r = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + r = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (r) { dev_err(&pdev->dev, "no usable DMA configuration\n"); goto err_free_res; diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index 4b933f6..c567168 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -36,14 +36,14 @@ struct nop_usb_xceiv { struct device *dev; }; -static u64 nop_xceiv_dmamask = DMA_32BIT_MASK; +static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32); static struct platform_device nop_xceiv_device = { .name = "nop_usb_xceiv", .id = -1, .dev = { .dma_mask = &nop_xceiv_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = NULL, }, }; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 30829ee..7ba8db5 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2260,11 +2260,11 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, gcap &= ~0x01; /* allow 64bit DMA address if supported by H/W */ - if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_64BIT_MASK)) - pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK); + if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64))) + pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64)); else { - pci_set_dma_mask(pci, DMA_32BIT_MASK); - pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK); + pci_set_dma_mask(pci, DMA_BIT_MASK(32)); + pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32)); } /* read number of streams from GCAP register instead of using -- cgit v0.10.2 From c863d835b7cd9a3c08a941d4ae59b8faefa31422 Mon Sep 17 00:00:00 2001 From: Bharata B Rao Date: Mon, 13 Apr 2009 14:40:15 -0700 Subject: memcg: fix documentation The description about various statistics from memory.stat is not accurate and confusing at times. Correct this along with a few other minor cleanups. Signed-off-by: Bharata B Rao Acked-by: Balbir Singh Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index a98a7fe..1a60887 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -6,15 +6,14 @@ used here with the memory controller that is used in hardware. Salient features -a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages +a. Enable control of Anonymous, Page Cache (mapped and unmapped) and + Swap Cache memory pages. b. The infrastructure allows easy addition of other types of memory to control c. Provides *zero overhead* for non memory controller users d. Provides a double LRU: global memory pressure causes reclaim from the global LRU; a cgroup on hitting a limit, reclaims from the per cgroup LRU -NOTE: Swap Cache (unmapped) is not accounted now. - Benefits and Purpose of the memory controller The memory controller isolates the memory behaviour of a group of tasks @@ -290,34 +289,44 @@ will be charged as a new owner of it. moved to the parent. If you want to avoid that, force_empty will be useful. 5.2 stat file - memory.stat file includes following statistics (now) - cache - # of pages from page-cache and shmem. - rss - # of pages from anonymous memory. - pgpgin - # of event of charging - pgpgout - # of event of uncharging - active_anon - # of pages on active lru of anon, shmem. - inactive_anon - # of pages on active lru of anon, shmem - active_file - # of pages on active lru of file-cache - inactive_file - # of pages on inactive lru of file cache - unevictable - # of pages cannot be reclaimed.(mlocked etc) - - Below is depend on CONFIG_DEBUG_VM. - inactive_ratio - VM internal parameter. (see mm/page_alloc.c) - recent_rotated_anon - VM internal parameter. (see mm/vmscan.c) - recent_rotated_file - VM internal parameter. (see mm/vmscan.c) - recent_scanned_anon - VM internal parameter. (see mm/vmscan.c) - recent_scanned_file - VM internal parameter. (see mm/vmscan.c) - - Memo: + +memory.stat file includes following statistics + +cache - # of bytes of page cache memory. +rss - # of bytes of anonymous and swap cache memory. +pgpgin - # of pages paged in (equivalent to # of charging events). +pgpgout - # of pages paged out (equivalent to # of uncharging events). +active_anon - # of bytes of anonymous and swap cache memory on active + lru list. +inactive_anon - # of bytes of anonymous memory and swap cache memory on + inactive lru list. +active_file - # of bytes of file-backed memory on active lru list. +inactive_file - # of bytes of file-backed memory on inactive lru list. +unevictable - # of bytes of memory that cannot be reclaimed (mlocked etc). + +The following additional stats are dependent on CONFIG_DEBUG_VM. + +inactive_ratio - VM internal parameter. (see mm/page_alloc.c) +recent_rotated_anon - VM internal parameter. (see mm/vmscan.c) +recent_rotated_file - VM internal parameter. (see mm/vmscan.c) +recent_scanned_anon - VM internal parameter. (see mm/vmscan.c) +recent_scanned_file - VM internal parameter. (see mm/vmscan.c) + +Memo: recent_rotated means recent frequency of lru rotation. recent_scanned means recent # of scans to lru. showing for better debug please see the code for meanings. +Note: + Only anonymous and swap cache memory is listed as part of 'rss' stat. + This should not be confused with the true 'resident set size' or the + amount of physical memory used by the cgroup. Per-cgroup rss + accounting is not done yet. 5.3 swappiness Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only. - Following cgroup's swapiness can't be changed. + Following cgroups' swapiness can't be changed. - root cgroup (uses /proc/sys/vm/swappiness). - a cgroup which uses hierarchy and it has child cgroup. - a cgroup which uses hierarchy and not the root of hierarchy. -- cgit v0.10.2 From bbdba2737443ae7b530a453d8152f2068ca4cf56 Mon Sep 17 00:00:00 2001 From: Shen Feng Date: Mon, 13 Apr 2009 14:40:16 -0700 Subject: doc: use correct debugfs mountpoint Use the default mountpoint of debugfs in the pktcdvd ABI. Signed-off-by: Shen Feng Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/ABI/testing/debugfs-pktcdvd b/Documentation/ABI/testing/debugfs-pktcdvd index bf9c16b..cf11736 100644 --- a/Documentation/ABI/testing/debugfs-pktcdvd +++ b/Documentation/ABI/testing/debugfs-pktcdvd @@ -1,4 +1,4 @@ -What: /debug/pktcdvd/pktcdvd[0-7] +What: /sys/kernel/debug/pktcdvd/pktcdvd[0-7] Date: Oct. 2006 KernelVersion: 2.6.20 Contact: Thomas Maier @@ -10,10 +10,10 @@ debugfs interface The pktcdvd module (packet writing driver) creates these files in debugfs: -/debug/pktcdvd/pktcdvd[0-7]/ +/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/ info (0444) Lots of driver statistics and infos. Example: ------- -cat /debug/pktcdvd/pktcdvd0/info +cat /sys/kernel/debug/pktcdvd/pktcdvd0/info -- cgit v0.10.2 From a06bba4643ae10ac6b202dade1cde38bc5e08b25 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 13 Apr 2009 14:40:17 -0700 Subject: sgi-xpc: update SGI XP/XPC/XPNET maintainer Dean has moved on to other work. His responsibilities for XP/XPC/XPNET have been handed to me. Signed-off-by: Robin Holt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index fbdb809..29d74f4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4978,8 +4978,8 @@ S: Maintained for 2.6. F: Documentation/sgi-visws.txt SGI XP/XPC/XPNET DRIVER -P: Dean Nelson -M: dcn@sgi.com +P: Robin Holt +M: holt@sgi.com S: Maintained F: drivers/misc/sgi-xp/ -- cgit v0.10.2 From a374c57b0764432a80303abee3d1afd1939b5a0a Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 13 Apr 2009 14:40:18 -0700 Subject: sgi-xpc: prevent false heartbeat failures The heartbeat timeout functionality in sgi-xpc is currently not trained to the connection time. If a connection is made and the code is in the last polling window prior to doing a timeout, the next polling window will see the heartbeat as unchanged and initiate a no-heartbeat disconnect. Signed-off-by: Robin Holt Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 114444c..da32bbe 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -90,18 +90,21 @@ struct xpc_rsvd_page { short max_npartitions; /* value of XPC_MAX_PARTITIONS */ u8 version; u8 pad1[3]; /* align to next u64 in 1st 64-byte cacheline */ + unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */ union { - unsigned long vars_pa; /* phys address of struct xpc_vars */ - unsigned long activate_gru_mq_desc_gpa; /* phys addr of */ - /* activate mq's */ - /* gru mq descriptor */ + struct { + unsigned long vars_pa; /* phys addr */ + } sn2; + struct { + unsigned long heartbeat_gpa; /* phys addr */ + unsigned long activate_gru_mq_desc_gpa; /* phys addr */ + } uv; } sn; - unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */ - u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */ + u64 pad2[9]; /* align to last u64 in 2nd 64-byte cacheline */ u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */ }; -#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */ +#define XPC_RP_VERSION _XPC_VERSION(3, 0) /* version 3.0 of the reserved page */ /* * Define the structures by which XPC variables can be exported to other @@ -182,6 +185,17 @@ struct xpc_vars_part_sn2 { (XPC_RP_MACH_NASIDS(_rp) + \ xpc_nasid_mask_nlongs)) + +/* + * The following structure describes the partition's heartbeat info which + * will be periodically read by other partitions to determine whether this + * XPC is still 'alive'. + */ +struct xpc_heartbeat_uv { + unsigned long value; + unsigned long offline; /* if 0, heartbeat should be changing */ +}; + /* * Info pertinent to a GRU message queue using a watch list for irq generation. */ @@ -198,7 +212,7 @@ struct xpc_gru_mq_uv { /* * The activate_mq is used to send/receive GRU messages that affect XPC's - * heartbeat, partition active state, and channel state. This is UV only. + * partition active state and channel state. This is uv only. */ struct xpc_activate_mq_msghdr_uv { unsigned int gru_msg_hdr; /* FOR GRU INTERNAL USE ONLY */ @@ -210,33 +224,26 @@ struct xpc_activate_mq_msghdr_uv { /* activate_mq defined message types */ #define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV 0 -#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV 1 -#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV 2 -#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV 3 -#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 4 -#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 5 +#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 1 +#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 2 -#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 6 -#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 7 -#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 8 -#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 9 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 3 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 4 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 5 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 6 -#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 10 -#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 11 +#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 7 +#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 8 struct xpc_activate_mq_msg_uv { struct xpc_activate_mq_msghdr_uv hdr; }; -struct xpc_activate_mq_msg_heartbeat_req_uv { - struct xpc_activate_mq_msghdr_uv hdr; - u64 heartbeat; -}; - struct xpc_activate_mq_msg_activate_req_uv { struct xpc_activate_mq_msghdr_uv hdr; unsigned long rp_gpa; + unsigned long heartbeat_gpa; unsigned long activate_gru_mq_desc_gpa; }; @@ -687,6 +694,9 @@ struct xpc_partition_sn2 { }; struct xpc_partition_uv { + unsigned long heartbeat_gpa; /* phys addr of partition's heartbeat */ + struct xpc_heartbeat_uv cached_heartbeat; /* cached copy of */ + /* partition's heartbeat */ unsigned long activate_gru_mq_desc_gpa; /* phys addr of parititon's */ /* activate mq's gru mq */ /* descriptor */ @@ -698,14 +708,12 @@ struct xpc_partition_uv { u8 remote_act_state; /* remote partition's act_state */ u8 act_state_req; /* act_state request from remote partition */ enum xp_retval reason; /* reason for deactivate act_state request */ - u64 heartbeat; /* incremented by remote partition */ }; /* struct xpc_partition_uv flags */ -#define XPC_P_HEARTBEAT_OFFLINE_UV 0x00000001 +#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000001 #define XPC_P_ENGAGED_UV 0x00000002 -#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000004 /* struct xpc_partition_uv act_state change requests */ @@ -807,7 +815,6 @@ extern int xpc_disengage_timedout; extern int xpc_activate_IRQ_rcvd; extern spinlock_t xpc_activate_IRQ_rcvd_lock; extern wait_queue_head_t xpc_activate_IRQ_wq; -extern void *xpc_heartbeating_to_mask; extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **); extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); @@ -825,6 +832,9 @@ extern void (*xpc_increment_heartbeat) (void); extern void (*xpc_offline_heartbeat) (void); extern void (*xpc_online_heartbeat) (void); extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *); +extern void (*xpc_allow_hb) (short); +extern void (*xpc_disallow_hb) (short); +extern void (*xpc_disallow_all_hbs) (void); extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *); extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *); @@ -909,40 +919,6 @@ extern void xpc_disconnect_channel(const int, struct xpc_channel *, extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval); extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval); -static inline int -xpc_hb_allowed(short partid, void *heartbeating_to_mask) -{ - return test_bit(partid, heartbeating_to_mask); -} - -static inline int -xpc_any_hbs_allowed(void) -{ - DBUG_ON(xpc_heartbeating_to_mask == NULL); - return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions); -} - -static inline void -xpc_allow_hb(short partid) -{ - DBUG_ON(xpc_heartbeating_to_mask == NULL); - set_bit(partid, xpc_heartbeating_to_mask); -} - -static inline void -xpc_disallow_hb(short partid) -{ - DBUG_ON(xpc_heartbeating_to_mask == NULL); - clear_bit(partid, xpc_heartbeating_to_mask); -} - -static inline void -xpc_disallow_all_hbs(void) -{ - DBUG_ON(xpc_heartbeating_to_mask == NULL); - bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions); -} - static inline void xpc_wakeup_channel_mgr(struct xpc_partition *part) { diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 1ab9fda..34b084c 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved. */ /* @@ -150,7 +150,6 @@ DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq); static unsigned long xpc_hb_check_timeout; static struct timer_list xpc_hb_timer; -void *xpc_heartbeating_to_mask; /* notification that the xpc_hb_checker thread has exited */ static DECLARE_COMPLETION(xpc_hb_checker_exited); @@ -176,6 +175,10 @@ enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie, unsigned long *rp_pa, size_t *len); int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp); + +void (*xpc_allow_hb) (short partid); +void (*xpc_disallow_hb) (short partid); +void (*xpc_disallow_all_hbs) (void); void (*xpc_heartbeat_init) (void); void (*xpc_heartbeat_exit) (void); void (*xpc_increment_heartbeat) (void); @@ -1087,7 +1090,6 @@ xpc_do_exit(enum xp_retval reason) } while (1); DBUG_ON(xpc_any_partition_engaged()); - DBUG_ON(xpc_any_hbs_allowed() != 0); xpc_teardown_rsvd_page(); diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index eaaa964..43ad296 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2008-2009 Silicon Graphics, Inc. All Rights Reserved. */ /* @@ -629,7 +629,7 @@ xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp) xpc_vars_sn2 = XPC_RP_VARS(rp); - rp->sn.vars_pa = xp_pa(xpc_vars_sn2); + rp->sn.sn2.vars_pa = xp_pa(xpc_vars_sn2); /* vars_part array follows immediately after vars */ xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) + @@ -693,6 +693,33 @@ xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp) return 0; } +static int +xpc_hb_allowed_sn2(short partid, void *heartbeating_to_mask) +{ + return test_bit(partid, heartbeating_to_mask); +} + +static void +xpc_allow_hb_sn2(short partid) +{ + DBUG_ON(xpc_vars_sn2 == NULL); + set_bit(partid, xpc_vars_sn2->heartbeating_to_mask); +} + +static void +xpc_disallow_hb_sn2(short partid) +{ + DBUG_ON(xpc_vars_sn2 == NULL); + clear_bit(partid, xpc_vars_sn2->heartbeating_to_mask); +} + +static void +xpc_disallow_all_hbs_sn2(void) +{ + DBUG_ON(xpc_vars_sn2 == NULL); + bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, xp_max_npartitions); +} + static void xpc_increment_heartbeat_sn2(void) { @@ -719,7 +746,6 @@ xpc_heartbeat_init_sn2(void) DBUG_ON(xpc_vars_sn2 == NULL); bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2); - xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0]; xpc_online_heartbeat_sn2(); } @@ -751,9 +777,9 @@ xpc_get_remote_heartbeat_sn2(struct xpc_partition *part) remote_vars->heartbeating_to_mask[0]); if ((remote_vars->heartbeat == part->last_heartbeat && - remote_vars->heartbeat_offline == 0) || - !xpc_hb_allowed(sn_partition_id, - &remote_vars->heartbeating_to_mask)) { + !remote_vars->heartbeat_offline) || + !xpc_hb_allowed_sn2(sn_partition_id, + remote_vars->heartbeating_to_mask)) { ret = xpNoHeartbeat; } else { part->last_heartbeat = remote_vars->heartbeat; @@ -972,7 +998,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) return; } - remote_vars_pa = remote_rp->sn.vars_pa; + remote_vars_pa = remote_rp->sn.sn2.vars_pa; remote_rp_version = remote_rp->version; remote_rp_ts_jiffies = remote_rp->ts_jiffies; @@ -2325,6 +2351,10 @@ xpc_init_sn2(void) xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_sn2; xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2; xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2; + + xpc_allow_hb = xpc_allow_hb_sn2; + xpc_disallow_hb = xpc_disallow_hb_sn2; + xpc_disallow_all_hbs = xpc_disallow_all_hbs_sn2; xpc_increment_heartbeat = xpc_increment_heartbeat_sn2; xpc_offline_heartbeat = xpc_offline_heartbeat_sn2; xpc_online_heartbeat = xpc_online_heartbeat_sn2; diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index f7fff47..97f7cb2 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -46,8 +46,7 @@ struct uv_IO_APIC_route_entry { }; #endif -static atomic64_t xpc_heartbeat_uv; -static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); +static struct xpc_heartbeat_uv *xpc_heartbeat_uv; #define XPC_ACTIVATE_MSG_SIZE_UV (1 * GRU_CACHE_LINE_BYTES) #define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \ @@ -423,41 +422,6 @@ xpc_handle_activate_mq_msg_uv(struct xpc_partition *part, /* syncing of remote_act_state was just done above */ break; - case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: { - struct xpc_activate_mq_msg_heartbeat_req_uv *msg; - - msg = container_of(msg_hdr, - struct xpc_activate_mq_msg_heartbeat_req_uv, - hdr); - part_uv->heartbeat = msg->heartbeat; - break; - } - case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: { - struct xpc_activate_mq_msg_heartbeat_req_uv *msg; - - msg = container_of(msg_hdr, - struct xpc_activate_mq_msg_heartbeat_req_uv, - hdr); - part_uv->heartbeat = msg->heartbeat; - - spin_lock_irqsave(&part_uv->flags_lock, irq_flags); - part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV; - spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); - break; - } - case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: { - struct xpc_activate_mq_msg_heartbeat_req_uv *msg; - - msg = container_of(msg_hdr, - struct xpc_activate_mq_msg_heartbeat_req_uv, - hdr); - part_uv->heartbeat = msg->heartbeat; - - spin_lock_irqsave(&part_uv->flags_lock, irq_flags); - part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV; - spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); - break; - } case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: { struct xpc_activate_mq_msg_activate_req_uv *msg; @@ -475,6 +439,7 @@ xpc_handle_activate_mq_msg_uv(struct xpc_partition *part, part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV; part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */ part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies; + part_uv->heartbeat_gpa = msg->heartbeat_gpa; if (msg->activate_gru_mq_desc_gpa != part_uv->activate_gru_mq_desc_gpa) { @@ -759,7 +724,7 @@ xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req) /* * !!! Make our side think that the remote partition sent an activate - * !!! message our way by doing what the activate IRQ handler would + * !!! mq message our way by doing what the activate IRQ handler would * !!! do had one really been sent. */ @@ -808,88 +773,80 @@ xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa, static int xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp) { - rp->sn.activate_gru_mq_desc_gpa = + xpc_heartbeat_uv = + &xpc_partitions[sn_partition_id].sn.uv.cached_heartbeat; + rp->sn.uv.heartbeat_gpa = uv_gpa(xpc_heartbeat_uv); + rp->sn.uv.activate_gru_mq_desc_gpa = uv_gpa(xpc_activate_mq_uv->gru_mq_desc); return 0; } static void -xpc_send_heartbeat_uv(int msg_type) +xpc_allow_hb_uv(short partid) { - short partid; - struct xpc_partition *part; - struct xpc_activate_mq_msg_heartbeat_req_uv msg; - - /* - * !!! On uv we're broadcasting a heartbeat message every 5 seconds. - * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20 - * !!! seconds. This is an increase in numalink traffic. - * ??? Is this good? - */ - - msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv); - - partid = find_first_bit(xpc_heartbeating_to_mask_uv, - XP_MAX_NPARTITIONS_UV); - - while (partid < XP_MAX_NPARTITIONS_UV) { - part = &xpc_partitions[partid]; +} - xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), - msg_type); +static void +xpc_disallow_hb_uv(short partid) +{ +} - partid = find_next_bit(xpc_heartbeating_to_mask_uv, - XP_MAX_NPARTITIONS_UV, partid + 1); - } +static void +xpc_disallow_all_hbs_uv(void) +{ } static void xpc_increment_heartbeat_uv(void) { - xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV); + xpc_heartbeat_uv->value++; } static void xpc_offline_heartbeat_uv(void) { - xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV); + xpc_increment_heartbeat_uv(); + xpc_heartbeat_uv->offline = 1; } static void xpc_online_heartbeat_uv(void) { - xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV); + xpc_increment_heartbeat_uv(); + xpc_heartbeat_uv->offline = 0; } static void xpc_heartbeat_init_uv(void) { - atomic64_set(&xpc_heartbeat_uv, 0); - bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); - xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0]; + xpc_heartbeat_uv->value = 1; + xpc_heartbeat_uv->offline = 0; } static void xpc_heartbeat_exit_uv(void) { - xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV); + xpc_offline_heartbeat_uv(); } static enum xp_retval xpc_get_remote_heartbeat_uv(struct xpc_partition *part) { struct xpc_partition_uv *part_uv = &part->sn.uv; - enum xp_retval ret = xpNoHeartbeat; + enum xp_retval ret; - if (part_uv->remote_act_state != XPC_P_AS_INACTIVE && - part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) { + ret = xp_remote_memcpy(uv_gpa(&part_uv->cached_heartbeat), + part_uv->heartbeat_gpa, + sizeof(struct xpc_heartbeat_uv)); + if (ret != xpSuccess) + return ret; - if (part_uv->heartbeat != part->last_heartbeat || - (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) { + if (part_uv->cached_heartbeat.value == part->last_heartbeat && + !part_uv->cached_heartbeat.offline) { - part->last_heartbeat = part_uv->heartbeat; - ret = xpSuccess; - } + ret = xpNoHeartbeat; + } else { + part->last_heartbeat = part_uv->cached_heartbeat.value; } return ret; } @@ -904,8 +861,9 @@ xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp, part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */ part->remote_rp_ts_jiffies = remote_rp->ts_jiffies; + part->sn.uv.heartbeat_gpa = remote_rp->sn.uv.heartbeat_gpa; part->sn.uv.activate_gru_mq_desc_gpa = - remote_rp->sn.activate_gru_mq_desc_gpa; + remote_rp->sn.uv.activate_gru_mq_desc_gpa; /* * ??? Is it a good idea to make this conditional on what is @@ -913,8 +871,9 @@ xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp, */ if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) { msg.rp_gpa = uv_gpa(xpc_rsvd_page); + msg.heartbeat_gpa = xpc_rsvd_page->sn.uv.heartbeat_gpa; msg.activate_gru_mq_desc_gpa = - xpc_rsvd_page->sn.activate_gru_mq_desc_gpa; + xpc_rsvd_page->sn.uv.activate_gru_mq_desc_gpa; xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV); } @@ -1677,6 +1636,10 @@ xpc_init_uv(void) xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv; xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv; xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv; + + xpc_allow_hb = xpc_allow_hb_uv; + xpc_disallow_hb = xpc_disallow_hb_uv; + xpc_disallow_all_hbs = xpc_disallow_all_hbs_uv; xpc_increment_heartbeat = xpc_increment_heartbeat_uv; xpc_offline_heartbeat = xpc_offline_heartbeat_uv; xpc_online_heartbeat = xpc_online_heartbeat_uv; -- cgit v0.10.2 From efdd06ed181a88a11e612238c1ac04668e665395 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 13 Apr 2009 14:40:19 -0700 Subject: sgi-xpc: implement opencomplete messaging sgi-xpc has a window of failure where an open message can be sent and a subsequent data message can get lost. We have added a new message (opencomplete) which closes that window. Signed-off-by: Robin Holt Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index da32bbe..a540476 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -232,9 +232,10 @@ struct xpc_activate_mq_msghdr_uv { #define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 4 #define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 5 #define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 6 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV 7 -#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 7 -#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 8 +#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 8 +#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 9 struct xpc_activate_mq_msg_uv { struct xpc_activate_mq_msghdr_uv hdr; @@ -278,6 +279,11 @@ struct xpc_activate_mq_msg_chctl_openreply_uv { unsigned long notify_gru_mq_desc_gpa; }; +struct xpc_activate_mq_msg_chctl_opencomplete_uv { + struct xpc_activate_mq_msghdr_uv hdr; + short ch_number; +}; + /* * Functions registered by add_timer() or called by kernel_thread() only * allow for a single 64-bit argument. The following macros can be used to @@ -583,30 +589,32 @@ struct xpc_channel { #define XPC_C_WASCONNECTED 0x00000001 /* channel was connected */ -#define XPC_C_ROPENREPLY 0x00000002 /* remote open channel reply */ -#define XPC_C_OPENREPLY 0x00000004 /* local open channel reply */ -#define XPC_C_ROPENREQUEST 0x00000008 /* remote open channel request */ -#define XPC_C_OPENREQUEST 0x00000010 /* local open channel request */ +#define XPC_C_ROPENCOMPLETE 0x00000002 /* remote open channel complete */ +#define XPC_C_OPENCOMPLETE 0x00000004 /* local open channel complete */ +#define XPC_C_ROPENREPLY 0x00000008 /* remote open channel reply */ +#define XPC_C_OPENREPLY 0x00000010 /* local open channel reply */ +#define XPC_C_ROPENREQUEST 0x00000020 /* remote open channel request */ +#define XPC_C_OPENREQUEST 0x00000040 /* local open channel request */ -#define XPC_C_SETUP 0x00000020 /* channel's msgqueues are alloc'd */ -#define XPC_C_CONNECTEDCALLOUT 0x00000040 /* connected callout initiated */ +#define XPC_C_SETUP 0x00000080 /* channel's msgqueues are alloc'd */ +#define XPC_C_CONNECTEDCALLOUT 0x00000100 /* connected callout initiated */ #define XPC_C_CONNECTEDCALLOUT_MADE \ - 0x00000080 /* connected callout completed */ -#define XPC_C_CONNECTED 0x00000100 /* local channel is connected */ -#define XPC_C_CONNECTING 0x00000200 /* channel is being connected */ + 0x00000200 /* connected callout completed */ +#define XPC_C_CONNECTED 0x00000400 /* local channel is connected */ +#define XPC_C_CONNECTING 0x00000800 /* channel is being connected */ -#define XPC_C_RCLOSEREPLY 0x00000400 /* remote close channel reply */ -#define XPC_C_CLOSEREPLY 0x00000800 /* local close channel reply */ -#define XPC_C_RCLOSEREQUEST 0x00001000 /* remote close channel request */ -#define XPC_C_CLOSEREQUEST 0x00002000 /* local close channel request */ +#define XPC_C_RCLOSEREPLY 0x00001000 /* remote close channel reply */ +#define XPC_C_CLOSEREPLY 0x00002000 /* local close channel reply */ +#define XPC_C_RCLOSEREQUEST 0x00004000 /* remote close channel request */ +#define XPC_C_CLOSEREQUEST 0x00008000 /* local close channel request */ -#define XPC_C_DISCONNECTED 0x00004000 /* channel is disconnected */ -#define XPC_C_DISCONNECTING 0x00008000 /* channel is being disconnected */ +#define XPC_C_DISCONNECTED 0x00010000 /* channel is disconnected */ +#define XPC_C_DISCONNECTING 0x00020000 /* channel is being disconnected */ #define XPC_C_DISCONNECTINGCALLOUT \ - 0x00010000 /* disconnecting callout initiated */ + 0x00040000 /* disconnecting callout initiated */ #define XPC_C_DISCONNECTINGCALLOUT_MADE \ - 0x00020000 /* disconnecting callout completed */ -#define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */ + 0x00080000 /* disconnecting callout completed */ +#define XPC_C_WDISCONNECT 0x00100000 /* waiting for channel disconnect */ /* * The channel control flags (chctl) union consists of a 64-bit variable which @@ -625,11 +633,13 @@ union xpc_channel_ctl_flags { #define XPC_CHCTL_CLOSEREPLY 0x02 #define XPC_CHCTL_OPENREQUEST 0x04 #define XPC_CHCTL_OPENREPLY 0x08 -#define XPC_CHCTL_MSGREQUEST 0x10 +#define XPC_CHCTL_OPENCOMPLETE 0x10 +#define XPC_CHCTL_MSGREQUEST 0x20 #define XPC_OPENCLOSE_CHCTL_FLAGS \ (XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \ - XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY) + XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY | \ + XPC_CHCTL_OPENCOMPLETE) #define XPC_MSG_CHCTL_FLAGS XPC_CHCTL_MSGREQUEST static inline int @@ -866,6 +876,8 @@ extern void (*xpc_send_chctl_closereply) (struct xpc_channel *, extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *, unsigned long *); extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *); +extern void (*xpc_send_chctl_opencomplete) (struct xpc_channel *, + unsigned long *); extern enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *, unsigned long); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 99a2534..2eb3abf 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved. */ /* @@ -44,10 +44,10 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (ret != xpSuccess) XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags); + else + ch->flags |= XPC_C_SETUP; - ch->flags |= XPC_C_SETUP; - - if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING)) + if (ch->flags & XPC_C_DISCONNECTING) return; } @@ -59,14 +59,18 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_ROPENREPLY)) return; - ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */ + if (!(ch->flags & XPC_C_OPENCOMPLETE)) { + ch->flags |= (XPC_C_OPENCOMPLETE | XPC_C_CONNECTED); + xpc_send_chctl_opencomplete(ch, irq_flags); + } + + if (!(ch->flags & XPC_C_ROPENCOMPLETE)) + return; dev_info(xpc_chan, "channel %d to partition %d connected\n", ch->number, ch->partid); - spin_unlock_irqrestore(&ch->lock, *irq_flags); - xpc_create_kthreads(ch, 1, 0); - spin_lock_irqsave(&ch->lock, *irq_flags); + ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */ } /* @@ -184,6 +188,7 @@ xpc_process_openclose_chctl_flags(struct xpc_partition *part, int ch_number, struct xpc_channel *ch = &part->channels[ch_number]; enum xp_retval reason; enum xp_retval ret; + int create_kthread = 0; spin_lock_irqsave(&ch->lock, irq_flags); @@ -196,8 +201,7 @@ again: * has had a chance to see that the channel is disconnected. */ ch->delayed_chctl_flags |= chctl_flags; - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) { @@ -239,8 +243,7 @@ again: XPC_CHCTL_CLOSEREQUEST; spin_unlock(&part->chctl_lock); } - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } XPC_SET_REASON(ch, 0, 0); @@ -250,7 +253,8 @@ again: ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST); } - chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY); + chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY | + XPC_CHCTL_OPENCOMPLETE); /* * The meaningful CLOSEREQUEST connection state fields are: @@ -269,8 +273,7 @@ again: XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags); DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY); - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } xpc_process_disconnect(ch, &irq_flags); @@ -283,8 +286,7 @@ again: if (ch->flags & XPC_C_DISCONNECTED) { DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING); - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST)); @@ -299,8 +301,7 @@ again: XPC_CHCTL_CLOSEREPLY; spin_unlock(&part->chctl_lock); } - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } ch->flags |= XPC_C_RCLOSEREPLY; @@ -320,14 +321,12 @@ again: if (part->act_state == XPC_P_AS_DEACTIVATING || (ch->flags & XPC_C_ROPENREQUEST)) { - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) { ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST; - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } DBUG_ON(!(ch->flags & (XPC_C_DISCONNECTED | XPC_C_OPENREQUEST))); @@ -341,8 +340,7 @@ again: */ if (args->entry_size == 0 || args->local_nentries == 0) { /* assume OPENREQUEST was delayed by mistake */ - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING); @@ -352,8 +350,7 @@ again: if (args->entry_size != ch->entry_size) { XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes, &irq_flags); - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } } else { ch->entry_size = args->entry_size; @@ -375,15 +372,13 @@ again: args->local_msgqueue_pa, args->local_nentries, args->remote_nentries, ch->partid, ch->number); - if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) { - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; - } + if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) + goto out; + if (!(ch->flags & XPC_C_OPENREQUEST)) { XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError, &irq_flags); - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST)); @@ -403,8 +398,7 @@ again: ret = xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa); if (ret != xpSuccess) { XPC_DISCONNECT_CHANNEL(ch, ret, &irq_flags); - spin_unlock_irqrestore(&ch->lock, irq_flags); - return; + goto out; } ch->flags |= XPC_C_ROPENREPLY; @@ -430,7 +424,36 @@ again: xpc_process_connect(ch, &irq_flags); } + if (chctl_flags & XPC_CHCTL_OPENCOMPLETE) { + + dev_dbg(xpc_chan, "XPC_CHCTL_OPENCOMPLETE received from " + "partid=%d, channel=%d\n", ch->partid, ch->number); + + if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) + goto out; + + if (!(ch->flags & XPC_C_OPENREQUEST) || + !(ch->flags & XPC_C_OPENREPLY)) { + XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError, + &irq_flags); + goto out; + } + + DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST)); + DBUG_ON(!(ch->flags & XPC_C_ROPENREPLY)); + DBUG_ON(!(ch->flags & XPC_C_CONNECTED)); + + ch->flags |= XPC_C_ROPENCOMPLETE; + + xpc_process_connect(ch, &irq_flags); + create_kthread = 1; + } + +out: spin_unlock_irqrestore(&ch->lock, irq_flags); + + if (create_kthread) + xpc_create_kthreads(ch, 1, 0); } /* @@ -564,10 +587,6 @@ xpc_process_sent_chctl_flags(struct xpc_partition *part) if (!(ch_flags & XPC_C_OPENREQUEST)) { DBUG_ON(ch_flags & XPC_C_SETUP); (void)xpc_connect_channel(ch); - } else { - spin_lock_irqsave(&ch->lock, irq_flags); - xpc_process_connect(ch, &irq_flags); - spin_unlock_irqrestore(&ch->lock, irq_flags); } continue; } diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 34b084c..2bb070e 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -220,6 +220,8 @@ void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch, unsigned long *irq_flags); void (*xpc_send_chctl_openreply) (struct xpc_channel *ch, unsigned long *irq_flags); +void (*xpc_send_chctl_opencomplete) (struct xpc_channel *ch, + unsigned long *irq_flags); enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch, unsigned long msgqueue_pa); diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 43ad296..09bc198 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -431,6 +431,13 @@ xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) } static void +xpc_send_chctl_opencomplete_sn2(struct xpc_channel *ch, + unsigned long *irq_flags) +{ + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENCOMPLETE, irq_flags); +} + +static void xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch) { XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST, NULL); @@ -2380,6 +2387,7 @@ xpc_init_sn2(void) xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2; xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2; xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2; + xpc_send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2; xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2; diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 97f7cb2..1e475b4 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -534,6 +534,17 @@ xpc_handle_activate_mq_msg_uv(struct xpc_partition *part, xpc_wakeup_channel_mgr(part); break; } + case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV: { + struct xpc_activate_mq_msg_chctl_opencomplete_uv *msg; + + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_chctl_opencomplete_uv, hdr); + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENCOMPLETE; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + } case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV: spin_lock_irqsave(&part_uv->flags_lock, irq_flags); part_uv->flags |= XPC_P_ENGAGED_UV; @@ -1202,6 +1213,16 @@ xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags) } static void +xpc_send_chctl_opencomplete_uv(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_activate_mq_msg_chctl_opencomplete_uv msg; + + msg.ch_number = ch->number; + xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV); +} + +static void xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number) { unsigned long irq_flags; @@ -1665,6 +1686,7 @@ xpc_init_uv(void) xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv; xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv; xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv; + xpc_send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv; xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv; -- cgit v0.10.2 From a7665b0a380585fbd70a2275f3120c6086e0c92d Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 13 Apr 2009 14:40:19 -0700 Subject: sgi-xpc: clean up numerous globals Introduce xpc_arch_ops and eliminate numerous individual global definitions. Signed-off-by: Robin Holt Cc: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index a540476..b94d5f7 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -780,6 +780,62 @@ struct xpc_partition { } ____cacheline_aligned; +struct xpc_arch_operations { + int (*setup_partitions) (void); + void (*teardown_partitions) (void); + void (*process_activate_IRQ_rcvd) (void); + enum xp_retval (*get_partition_rsvd_page_pa) + (void *, u64 *, unsigned long *, size_t *); + int (*setup_rsvd_page) (struct xpc_rsvd_page *); + + void (*allow_hb) (short); + void (*disallow_hb) (short); + void (*disallow_all_hbs) (void); + void (*increment_heartbeat) (void); + void (*offline_heartbeat) (void); + void (*online_heartbeat) (void); + void (*heartbeat_init) (void); + void (*heartbeat_exit) (void); + enum xp_retval (*get_remote_heartbeat) (struct xpc_partition *); + + void (*request_partition_activation) (struct xpc_rsvd_page *, + unsigned long, int); + void (*request_partition_reactivation) (struct xpc_partition *); + void (*request_partition_deactivation) (struct xpc_partition *); + void (*cancel_partition_deactivation_request) (struct xpc_partition *); + enum xp_retval (*setup_ch_structures) (struct xpc_partition *); + void (*teardown_ch_structures) (struct xpc_partition *); + + enum xp_retval (*make_first_contact) (struct xpc_partition *); + + u64 (*get_chctl_all_flags) (struct xpc_partition *); + void (*send_chctl_closerequest) (struct xpc_channel *, unsigned long *); + void (*send_chctl_closereply) (struct xpc_channel *, unsigned long *); + void (*send_chctl_openrequest) (struct xpc_channel *, unsigned long *); + void (*send_chctl_openreply) (struct xpc_channel *, unsigned long *); + void (*send_chctl_opencomplete) (struct xpc_channel *, unsigned long *); + void (*process_msg_chctl_flags) (struct xpc_partition *, int); + + enum xp_retval (*save_remote_msgqueue_pa) (struct xpc_channel *, + unsigned long); + + enum xp_retval (*setup_msg_structures) (struct xpc_channel *); + void (*teardown_msg_structures) (struct xpc_channel *); + + void (*indicate_partition_engaged) (struct xpc_partition *); + void (*indicate_partition_disengaged) (struct xpc_partition *); + void (*assume_partition_disengaged) (short); + int (*partition_engaged) (short); + int (*any_partition_engaged) (void); + + int (*n_of_deliverable_payloads) (struct xpc_channel *); + enum xp_retval (*send_payload) (struct xpc_channel *, u32, void *, + u16, u8, xpc_notify_func, void *); + void *(*get_deliverable_payload) (struct xpc_channel *); + void (*received_payload) (struct xpc_channel *, void *); + void (*notify_senders_of_disconnect) (struct xpc_channel *); +}; + /* struct xpc_partition act_state values (for XPC HB) */ #define XPC_P_AS_INACTIVE 0x00 /* partition is not active */ @@ -820,6 +876,7 @@ extern struct xpc_registration xpc_registrations[]; /* found in xpc_main.c */ extern struct device *xpc_part; extern struct device *xpc_chan; +extern struct xpc_arch_operations xpc_arch_ops; extern int xpc_disengage_timelimit; extern int xpc_disengage_timedout; extern int xpc_activate_IRQ_rcvd; @@ -830,61 +887,6 @@ extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); -extern int (*xpc_setup_partitions_sn) (void); -extern void (*xpc_teardown_partitions_sn) (void); -extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *, - unsigned long *, - size_t *); -extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *); -extern void (*xpc_heartbeat_init) (void); -extern void (*xpc_heartbeat_exit) (void); -extern void (*xpc_increment_heartbeat) (void); -extern void (*xpc_offline_heartbeat) (void); -extern void (*xpc_online_heartbeat) (void); -extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *); -extern void (*xpc_allow_hb) (short); -extern void (*xpc_disallow_hb) (short); -extern void (*xpc_disallow_all_hbs) (void); -extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); -extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *); -extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *); -extern void (*xpc_teardown_msg_structures) (struct xpc_channel *); -extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *); -extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int); -extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *); -extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *); -extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *, - unsigned long, int); -extern void (*xpc_request_partition_reactivation) (struct xpc_partition *); -extern void (*xpc_request_partition_deactivation) (struct xpc_partition *); -extern void (*xpc_cancel_partition_deactivation_request) ( - struct xpc_partition *); -extern void (*xpc_process_activate_IRQ_rcvd) (void); -extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *); -extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *); - -extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *); -extern int (*xpc_partition_engaged) (short); -extern int (*xpc_any_partition_engaged) (void); -extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *); -extern void (*xpc_assume_partition_disengaged) (short); - -extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *, - unsigned long *); -extern void (*xpc_send_chctl_closereply) (struct xpc_channel *, - unsigned long *); -extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *, - unsigned long *); -extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *); -extern void (*xpc_send_chctl_opencomplete) (struct xpc_channel *, - unsigned long *); - -extern enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *, - unsigned long); - -extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *, - u16, u8, xpc_notify_func, void *); -extern void (*xpc_received_payload) (struct xpc_channel *, void *); /* found in xpc_sn2.c */ extern int xpc_init_sn2(void); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 2eb3abf..652593f 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -39,7 +39,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_SETUP)) { spin_unlock_irqrestore(&ch->lock, *irq_flags); - ret = xpc_setup_msg_structures(ch); + ret = xpc_arch_ops.setup_msg_structures(ch); spin_lock_irqsave(&ch->lock, *irq_flags); if (ret != xpSuccess) @@ -53,7 +53,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_OPENREPLY)) { ch->flags |= XPC_C_OPENREPLY; - xpc_send_chctl_openreply(ch, irq_flags); + xpc_arch_ops.send_chctl_openreply(ch, irq_flags); } if (!(ch->flags & XPC_C_ROPENREPLY)) @@ -61,7 +61,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_OPENCOMPLETE)) { ch->flags |= (XPC_C_OPENCOMPLETE | XPC_C_CONNECTED); - xpc_send_chctl_opencomplete(ch, irq_flags); + xpc_arch_ops.send_chctl_opencomplete(ch, irq_flags); } if (!(ch->flags & XPC_C_ROPENCOMPLETE)) @@ -100,7 +100,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) if (part->act_state == XPC_P_AS_DEACTIVATING) { /* can't proceed until the other side disengages from us */ - if (xpc_partition_engaged(ch->partid)) + if (xpc_arch_ops.partition_engaged(ch->partid)) return; } else { @@ -112,7 +112,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_CLOSEREPLY)) { ch->flags |= XPC_C_CLOSEREPLY; - xpc_send_chctl_closereply(ch, irq_flags); + xpc_arch_ops.send_chctl_closereply(ch, irq_flags); } if (!(ch->flags & XPC_C_RCLOSEREPLY)) @@ -122,7 +122,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) /* wake those waiting for notify completion */ if (atomic_read(&ch->n_to_notify) > 0) { /* we do callout while holding ch->lock, callout can't block */ - xpc_notify_senders_of_disconnect(ch); + xpc_arch_ops.notify_senders_of_disconnect(ch); } /* both sides are disconnected now */ @@ -136,7 +136,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) DBUG_ON(atomic_read(&ch->n_to_notify) != 0); /* it's now safe to free the channel's message queues */ - xpc_teardown_msg_structures(ch); + xpc_arch_ops.teardown_msg_structures(ch); ch->func = NULL; ch->key = NULL; @@ -148,8 +148,9 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) /* * Mark the channel disconnected and clear all other flags, including - * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but - * not including XPC_C_WDISCONNECT (if it was set). + * XPC_C_SETUP (because of call to + * xpc_arch_ops.teardown_msg_structures()) but not including + * XPC_C_WDISCONNECT (if it was set). */ ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT)); @@ -395,7 +396,8 @@ again: DBUG_ON(args->local_nentries == 0); DBUG_ON(args->remote_nentries == 0); - ret = xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa); + ret = xpc_arch_ops.save_remote_msgqueue_pa(ch, + args->local_msgqueue_pa); if (ret != xpSuccess) { XPC_DISCONNECT_CHANNEL(ch, ret, &irq_flags); goto out; @@ -531,7 +533,7 @@ xpc_connect_channel(struct xpc_channel *ch) /* initiate the connection */ ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING); - xpc_send_chctl_openrequest(ch, &irq_flags); + xpc_arch_ops.send_chctl_openrequest(ch, &irq_flags); xpc_process_connect(ch, &irq_flags); @@ -549,7 +551,7 @@ xpc_process_sent_chctl_flags(struct xpc_partition *part) int ch_number; u32 ch_flags; - chctl.all_flags = xpc_get_chctl_all_flags(part); + chctl.all_flags = xpc_arch_ops.get_chctl_all_flags(part); /* * Initiate channel connections for registered channels. @@ -598,7 +600,7 @@ xpc_process_sent_chctl_flags(struct xpc_partition *part) */ if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS) - xpc_process_msg_chctl_flags(part, ch_number); + xpc_arch_ops.process_msg_chctl_flags(part, ch_number); } } @@ -774,7 +776,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch, XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY | XPC_C_CONNECTING | XPC_C_CONNECTED); - xpc_send_chctl_closerequest(ch, irq_flags); + xpc_arch_ops.send_chctl_closerequest(ch, irq_flags); if (channel_was_connected) ch->flags |= XPC_C_WASCONNECTED; @@ -881,8 +883,8 @@ xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload, DBUG_ON(payload == NULL); if (xpc_part_ref(part)) { - ret = xpc_send_payload(&part->channels[ch_number], flags, - payload, payload_size, 0, NULL, NULL); + ret = xpc_arch_ops.send_payload(&part->channels[ch_number], + flags, payload, payload_size, 0, NULL, NULL); xpc_part_deref(part); } @@ -933,9 +935,8 @@ xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload, DBUG_ON(func == NULL); if (xpc_part_ref(part)) { - ret = xpc_send_payload(&part->channels[ch_number], flags, - payload, payload_size, XPC_N_CALL, func, - key); + ret = xpc_arch_ops.send_payload(&part->channels[ch_number], + flags, payload, payload_size, XPC_N_CALL, func, key); xpc_part_deref(part); } return ret; @@ -949,7 +950,7 @@ xpc_deliver_payload(struct xpc_channel *ch) { void *payload; - payload = xpc_get_deliverable_payload(ch); + payload = xpc_arch_ops.get_deliverable_payload(ch); if (payload != NULL) { /* @@ -1003,7 +1004,7 @@ xpc_initiate_received(short partid, int ch_number, void *payload) DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); ch = &part->channels[ch_number]; - xpc_received_payload(ch, payload); + xpc_arch_ops.received_payload(ch, payload); /* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload() */ xpc_msgqueue_deref(ch); diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 2bb070e..fd3688a 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -169,68 +169,7 @@ static struct notifier_block xpc_die_notifier = { .notifier_call = xpc_system_die, }; -int (*xpc_setup_partitions_sn) (void); -void (*xpc_teardown_partitions_sn) (void); -enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie, - unsigned long *rp_pa, - size_t *len); -int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp); - -void (*xpc_allow_hb) (short partid); -void (*xpc_disallow_hb) (short partid); -void (*xpc_disallow_all_hbs) (void); -void (*xpc_heartbeat_init) (void); -void (*xpc_heartbeat_exit) (void); -void (*xpc_increment_heartbeat) (void); -void (*xpc_offline_heartbeat) (void); -void (*xpc_online_heartbeat) (void); -enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part); - -enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); -void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch); -u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part); -enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch); -void (*xpc_teardown_msg_structures) (struct xpc_channel *ch); -void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number); -int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch); -void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch); - -void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp, - unsigned long remote_rp_pa, - int nasid); -void (*xpc_request_partition_reactivation) (struct xpc_partition *part); -void (*xpc_request_partition_deactivation) (struct xpc_partition *part); -void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part); - -void (*xpc_process_activate_IRQ_rcvd) (void); -enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part); -void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part); - -void (*xpc_indicate_partition_engaged) (struct xpc_partition *part); -int (*xpc_partition_engaged) (short partid); -int (*xpc_any_partition_engaged) (void); -void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part); -void (*xpc_assume_partition_disengaged) (short partid); - -void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch, - unsigned long *irq_flags); -void (*xpc_send_chctl_closereply) (struct xpc_channel *ch, - unsigned long *irq_flags); -void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch, - unsigned long *irq_flags); -void (*xpc_send_chctl_openreply) (struct xpc_channel *ch, - unsigned long *irq_flags); -void (*xpc_send_chctl_opencomplete) (struct xpc_channel *ch, - unsigned long *irq_flags); - -enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch, - unsigned long msgqueue_pa); - -enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags, - void *payload, u16 payload_size, - u8 notify_type, xpc_notify_func func, - void *key); -void (*xpc_received_payload) (struct xpc_channel *ch, void *payload); +struct xpc_arch_operations xpc_arch_ops; /* * Timer function to enforce the timelimit on the partition disengage. @@ -245,7 +184,7 @@ xpc_timeout_partition_disengage(unsigned long data) (void)xpc_partition_disengaged(part); DBUG_ON(part->disengage_timeout != 0); - DBUG_ON(xpc_partition_engaged(XPC_PARTID(part))); + DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part))); } /* @@ -256,7 +195,7 @@ xpc_timeout_partition_disengage(unsigned long data) static void xpc_hb_beater(unsigned long dummy) { - xpc_increment_heartbeat(); + xpc_arch_ops.increment_heartbeat(); if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) wake_up_interruptible(&xpc_activate_IRQ_wq); @@ -268,7 +207,7 @@ xpc_hb_beater(unsigned long dummy) static void xpc_start_hb_beater(void) { - xpc_heartbeat_init(); + xpc_arch_ops.heartbeat_init(); init_timer(&xpc_hb_timer); xpc_hb_timer.function = xpc_hb_beater; xpc_hb_beater(0); @@ -278,7 +217,7 @@ static void xpc_stop_hb_beater(void) { del_timer_sync(&xpc_hb_timer); - xpc_heartbeat_exit(); + xpc_arch_ops.heartbeat_exit(); } /* @@ -307,7 +246,7 @@ xpc_check_remote_hb(void) continue; } - ret = xpc_get_remote_heartbeat(part); + ret = xpc_arch_ops.get_remote_heartbeat(part); if (ret != xpSuccess) XPC_DEACTIVATE_PARTITION(part, ret); } @@ -358,7 +297,7 @@ xpc_hb_checker(void *ignore) force_IRQ = 0; dev_dbg(xpc_part, "processing activate IRQs " "received\n"); - xpc_process_activate_IRQ_rcvd(); + xpc_arch_ops.process_activate_IRQ_rcvd(); } /* wait for IRQ or timeout */ @@ -533,7 +472,7 @@ xpc_setup_ch_structures(struct xpc_partition *part) init_waitqueue_head(&ch->idle_wq); } - ret = xpc_setup_ch_structures_sn(part); + ret = xpc_arch_ops.setup_ch_structures(part); if (ret != xpSuccess) goto out_2; @@ -577,7 +516,7 @@ xpc_teardown_ch_structures(struct xpc_partition *part) /* now we can begin tearing down the infrastructure */ - xpc_teardown_ch_structures_sn(part); + xpc_arch_ops.teardown_ch_structures(part); kfree(part->remote_openclose_args_base); part->remote_openclose_args = NULL; @@ -625,12 +564,12 @@ xpc_activating(void *__partid) dev_dbg(xpc_part, "activating partition %d\n", partid); - xpc_allow_hb(partid); + xpc_arch_ops.allow_hb(partid); if (xpc_setup_ch_structures(part) == xpSuccess) { (void)xpc_part_ref(part); /* this will always succeed */ - if (xpc_make_first_contact(part) == xpSuccess) { + if (xpc_arch_ops.make_first_contact(part) == xpSuccess) { xpc_mark_partition_active(part); xpc_channel_mgr(part); /* won't return until partition is deactivating */ @@ -640,12 +579,12 @@ xpc_activating(void *__partid) xpc_teardown_ch_structures(part); } - xpc_disallow_hb(partid); + xpc_arch_ops.disallow_hb(partid); xpc_mark_partition_inactive(part); if (part->reason == xpReactivating) { /* interrupting ourselves results in activating partition */ - xpc_request_partition_reactivation(part); + xpc_arch_ops.request_partition_reactivation(part); } return 0; @@ -718,10 +657,13 @@ xpc_activate_kthreads(struct xpc_channel *ch, int needed) static void xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) { + int (*n_of_deliverable_payloads) (struct xpc_channel *) = + xpc_arch_ops.n_of_deliverable_payloads; + do { /* deliver messages to their intended recipients */ - while (xpc_n_of_deliverable_payloads(ch) > 0 && + while (n_of_deliverable_payloads(ch) > 0 && !(ch->flags & XPC_C_DISCONNECTING)) { xpc_deliver_payload(ch); } @@ -737,7 +679,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) "wait_event_interruptible_exclusive()\n"); (void)wait_event_interruptible_exclusive(ch->idle_wq, - (xpc_n_of_deliverable_payloads(ch) > 0 || + (n_of_deliverable_payloads(ch) > 0 || (ch->flags & XPC_C_DISCONNECTING))); atomic_dec(&ch->kthreads_idle); @@ -754,6 +696,8 @@ xpc_kthread_start(void *args) struct xpc_channel *ch; int n_needed; unsigned long irq_flags; + int (*n_of_deliverable_payloads) (struct xpc_channel *) = + xpc_arch_ops.n_of_deliverable_payloads; dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n", partid, ch_number); @@ -782,7 +726,7 @@ xpc_kthread_start(void *args) * additional kthreads to help deliver them. We only * need one less than total #of messages to deliver. */ - n_needed = xpc_n_of_deliverable_payloads(ch) - 1; + n_needed = n_of_deliverable_payloads(ch) - 1; if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING)) xpc_activate_kthreads(ch, n_needed); @@ -810,7 +754,7 @@ xpc_kthread_start(void *args) if (atomic_dec_return(&ch->kthreads_assigned) == 0 && atomic_dec_return(&part->nchannels_engaged) == 0) { - xpc_indicate_partition_disengaged(part); + xpc_arch_ops.indicate_partition_disengaged(part); } xpc_msgqueue_deref(ch); @@ -842,6 +786,8 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed, u64 args = XPC_PACK_ARGS(ch->partid, ch->number); struct xpc_partition *part = &xpc_partitions[ch->partid]; struct task_struct *kthread; + void (*indicate_partition_disengaged) (struct xpc_partition *) = + xpc_arch_ops.indicate_partition_disengaged; while (needed-- > 0) { @@ -863,7 +809,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed, } else if (atomic_inc_return(&ch->kthreads_assigned) == 1 && atomic_inc_return(&part->nchannels_engaged) == 1) { - xpc_indicate_partition_engaged(part); + xpc_arch_ops.indicate_partition_engaged(part); } (void)xpc_part_ref(part); xpc_msgqueue_ref(ch); @@ -885,7 +831,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed, if (atomic_dec_return(&ch->kthreads_assigned) == 0 && atomic_dec_return(&part->nchannels_engaged) == 0) { - xpc_indicate_partition_disengaged(part); + indicate_partition_disengaged(part); } xpc_msgqueue_deref(ch); xpc_part_deref(part); @@ -998,13 +944,13 @@ xpc_setup_partitions(void) atomic_set(&part->references, 0); } - return xpc_setup_partitions_sn(); + return xpc_arch_ops.setup_partitions(); } static void xpc_teardown_partitions(void) { - xpc_teardown_partitions_sn(); + xpc_arch_ops.teardown_partitions(); kfree(xpc_partitions); } @@ -1060,7 +1006,7 @@ xpc_do_exit(enum xp_retval reason) disengage_timeout = part->disengage_timeout; } - if (xpc_any_partition_engaged()) { + if (xpc_arch_ops.any_partition_engaged()) { if (time_is_before_jiffies(printmsg_time)) { dev_info(xpc_part, "waiting for remote " "partitions to deactivate, timeout in " @@ -1091,7 +1037,7 @@ xpc_do_exit(enum xp_retval reason) } while (1); - DBUG_ON(xpc_any_partition_engaged()); + DBUG_ON(xpc_arch_ops.any_partition_engaged()); xpc_teardown_rsvd_page(); @@ -1156,15 +1102,15 @@ xpc_die_deactivate(void) /* keep xpc_hb_checker thread from doing anything (just in case) */ xpc_exiting = 1; - xpc_disallow_all_hbs(); /*indicate we're deactivated */ + xpc_arch_ops.disallow_all_hbs(); /*indicate we're deactivated */ for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; - if (xpc_partition_engaged(partid) || + if (xpc_arch_ops.partition_engaged(partid) || part->act_state != XPC_P_AS_INACTIVE) { - xpc_request_partition_deactivation(part); - xpc_indicate_partition_disengaged(part); + xpc_arch_ops.request_partition_deactivation(part); + xpc_arch_ops.indicate_partition_disengaged(part); } } @@ -1181,7 +1127,7 @@ xpc_die_deactivate(void) wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5; while (1) { - any_engaged = xpc_any_partition_engaged(); + any_engaged = xpc_arch_ops.any_partition_engaged(); if (!any_engaged) { dev_info(xpc_part, "all partitions have deactivated\n"); break; @@ -1190,7 +1136,7 @@ xpc_die_deactivate(void) if (!keep_waiting--) { for (partid = 0; partid < xp_max_npartitions; partid++) { - if (xpc_partition_engaged(partid)) { + if (xpc_arch_ops.partition_engaged(partid)) { dev_info(xpc_part, "deactivate from " "remote partition %d timed " "out\n", partid); @@ -1237,7 +1183,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) /* fall through */ case DIE_MCA_MONARCH_ENTER: case DIE_INIT_MONARCH_ENTER: - xpc_offline_heartbeat(); + xpc_arch_ops.offline_heartbeat(); break; case DIE_KDEBUG_LEAVE: @@ -1248,7 +1194,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) /* fall through */ case DIE_MCA_MONARCH_LEAVE: case DIE_INIT_MONARCH_LEAVE: - xpc_online_heartbeat(); + xpc_arch_ops.online_heartbeat(); break; } #else diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 6722f6f..65877bc 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -70,6 +70,9 @@ xpc_get_rsvd_page_pa(int nasid) size_t buf_len = 0; void *buf = buf; void *buf_base = NULL; + enum xp_retval (*get_partition_rsvd_page_pa) + (void *, u64 *, unsigned long *, size_t *) = + xpc_arch_ops.get_partition_rsvd_page_pa; while (1) { @@ -79,8 +82,7 @@ xpc_get_rsvd_page_pa(int nasid) * ??? function or have two versions? Rename rp_pa for UV to * ??? rp_gpa? */ - ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, - &len); + ret = get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, &len); dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, " "address=0x%016lx, len=0x%016lx\n", ret, @@ -172,7 +174,7 @@ xpc_setup_rsvd_page(void) xpc_part_nasids = XPC_RP_PART_NASIDS(rp); xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp); - ret = xpc_setup_rsvd_page_sn(rp); + ret = xpc_arch_ops.setup_rsvd_page(rp); if (ret != 0) return ret; @@ -264,7 +266,7 @@ xpc_partition_disengaged(struct xpc_partition *part) short partid = XPC_PARTID(part); int disengaged; - disengaged = !xpc_partition_engaged(partid); + disengaged = !xpc_arch_ops.partition_engaged(partid); if (part->disengage_timeout) { if (!disengaged) { if (time_is_after_jiffies(part->disengage_timeout)) { @@ -280,7 +282,7 @@ xpc_partition_disengaged(struct xpc_partition *part) dev_info(xpc_part, "deactivate request to remote " "partition %d timed out\n", partid); xpc_disengage_timedout = 1; - xpc_assume_partition_disengaged(partid); + xpc_arch_ops.assume_partition_disengaged(partid); disengaged = 1; } part->disengage_timeout = 0; @@ -294,7 +296,7 @@ xpc_partition_disengaged(struct xpc_partition *part) if (part->act_state != XPC_P_AS_INACTIVE) xpc_wakeup_channel_mgr(part); - xpc_cancel_partition_deactivation_request(part); + xpc_arch_ops.cancel_partition_deactivation_request(part); } return disengaged; } @@ -339,7 +341,7 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, spin_unlock_irqrestore(&part->act_lock, irq_flags); if (reason == xpReactivating) { /* we interrupt ourselves to reactivate partition */ - xpc_request_partition_reactivation(part); + xpc_arch_ops.request_partition_reactivation(part); } return; } @@ -358,7 +360,7 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, spin_unlock_irqrestore(&part->act_lock, irq_flags); /* ask remote partition to deactivate with regard to us */ - xpc_request_partition_deactivation(part); + xpc_arch_ops.request_partition_deactivation(part); /* set a timelimit on the disengage phase of the deactivation request */ part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ); @@ -496,7 +498,7 @@ xpc_discovery(void) continue; } - xpc_request_partition_activation(remote_rp, + xpc_arch_ops.request_partition_activation(remote_rp, remote_rp_pa, nasid); } } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 09bc198..915a3b4 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -60,14 +60,14 @@ static struct xpc_vars_sn2 *xpc_vars_sn2; static struct xpc_vars_part_sn2 *xpc_vars_part_sn2; static int -xpc_setup_partitions_sn_sn2(void) +xpc_setup_partitions_sn2(void) { /* nothing needs to be done */ return 0; } static void -xpc_teardown_partitions_sn_sn2(void) +xpc_teardown_partitions_sn2(void) { /* nothing needs to be done */ } @@ -628,7 +628,7 @@ xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa, static int -xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp) +xpc_setup_rsvd_page_sn2(struct xpc_rsvd_page *rp) { struct amo *amos_page; int i; @@ -1162,7 +1162,7 @@ xpc_process_activate_IRQ_rcvd_sn2(void) * Setup the channel structures that are sn2 specific. */ static enum xp_retval -xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part) +xpc_setup_ch_structures_sn2(struct xpc_partition *part) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; struct xpc_channel_sn2 *ch_sn2; @@ -1284,7 +1284,7 @@ out_1: * Teardown the channel structures that are sn2 specific. */ static void -xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part) +xpc_teardown_ch_structures_sn2(struct xpc_partition *part) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; short partid = XPC_PARTID(part); @@ -2348,66 +2348,70 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) xpc_acknowledge_msgs_sn2(ch, get, msg->flags); } +static struct xpc_arch_operations xpc_arch_ops_sn2 = { + .setup_partitions = xpc_setup_partitions_sn2, + .teardown_partitions = xpc_teardown_partitions_sn2, + .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2, + .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2, + .setup_rsvd_page = xpc_setup_rsvd_page_sn2, + + .allow_hb = xpc_allow_hb_sn2, + .disallow_hb = xpc_disallow_hb_sn2, + .disallow_all_hbs = xpc_disallow_all_hbs_sn2, + .increment_heartbeat = xpc_increment_heartbeat_sn2, + .offline_heartbeat = xpc_offline_heartbeat_sn2, + .online_heartbeat = xpc_online_heartbeat_sn2, + .heartbeat_init = xpc_heartbeat_init_sn2, + .heartbeat_exit = xpc_heartbeat_exit_sn2, + .get_remote_heartbeat = xpc_get_remote_heartbeat_sn2, + + .request_partition_activation = + xpc_request_partition_activation_sn2, + .request_partition_reactivation = + xpc_request_partition_reactivation_sn2, + .request_partition_deactivation = + xpc_request_partition_deactivation_sn2, + .cancel_partition_deactivation_request = + xpc_cancel_partition_deactivation_request_sn2, + + .setup_ch_structures = xpc_setup_ch_structures_sn2, + .teardown_ch_structures = xpc_teardown_ch_structures_sn2, + + .make_first_contact = xpc_make_first_contact_sn2, + + .get_chctl_all_flags = xpc_get_chctl_all_flags_sn2, + .send_chctl_closerequest = xpc_send_chctl_closerequest_sn2, + .send_chctl_closereply = xpc_send_chctl_closereply_sn2, + .send_chctl_openrequest = xpc_send_chctl_openrequest_sn2, + .send_chctl_openreply = xpc_send_chctl_openreply_sn2, + .send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2, + .process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2, + + .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2, + + .setup_msg_structures = xpc_setup_msg_structures_sn2, + .teardown_msg_structures = xpc_teardown_msg_structures_sn2, + + .indicate_partition_engaged = xpc_indicate_partition_engaged_sn2, + .indicate_partition_disengaged = xpc_indicate_partition_disengaged_sn2, + .partition_engaged = xpc_partition_engaged_sn2, + .any_partition_engaged = xpc_any_partition_engaged_sn2, + .assume_partition_disengaged = xpc_assume_partition_disengaged_sn2, + + .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2, + .send_payload = xpc_send_payload_sn2, + .get_deliverable_payload = xpc_get_deliverable_payload_sn2, + .received_payload = xpc_received_payload_sn2, + .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2, +}; + int xpc_init_sn2(void) { int ret; size_t buf_size; - xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2; - xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_sn2; - xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2; - xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2; - - xpc_allow_hb = xpc_allow_hb_sn2; - xpc_disallow_hb = xpc_disallow_hb_sn2; - xpc_disallow_all_hbs = xpc_disallow_all_hbs_sn2; - xpc_increment_heartbeat = xpc_increment_heartbeat_sn2; - xpc_offline_heartbeat = xpc_offline_heartbeat_sn2; - xpc_online_heartbeat = xpc_online_heartbeat_sn2; - xpc_heartbeat_init = xpc_heartbeat_init_sn2; - xpc_heartbeat_exit = xpc_heartbeat_exit_sn2; - xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2; - - xpc_request_partition_activation = xpc_request_partition_activation_sn2; - xpc_request_partition_reactivation = - xpc_request_partition_reactivation_sn2; - xpc_request_partition_deactivation = - xpc_request_partition_deactivation_sn2; - xpc_cancel_partition_deactivation_request = - xpc_cancel_partition_deactivation_request_sn2; - - xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2; - xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2; - xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2; - xpc_make_first_contact = xpc_make_first_contact_sn2; - - xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2; - xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2; - xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2; - xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2; - xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2; - xpc_send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2; - - xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2; - - xpc_setup_msg_structures = xpc_setup_msg_structures_sn2; - xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2; - - xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2; - xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2; - xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2; - xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2; - - xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2; - xpc_indicate_partition_disengaged = - xpc_indicate_partition_disengaged_sn2; - xpc_partition_engaged = xpc_partition_engaged_sn2; - xpc_any_partition_engaged = xpc_any_partition_engaged_sn2; - xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2; - - xpc_send_payload = xpc_send_payload_sn2; - xpc_received_payload = xpc_received_payload_sn2; + xpc_arch_ops = xpc_arch_ops_sn2; if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) { dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is " diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 1e475b4..9172fcd 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -62,7 +62,7 @@ static struct xpc_gru_mq_uv *xpc_activate_mq_uv; static struct xpc_gru_mq_uv *xpc_notify_mq_uv; static int -xpc_setup_partitions_sn_uv(void) +xpc_setup_partitions_uv(void) { short partid; struct xpc_partition_uv *part_uv; @@ -78,7 +78,7 @@ xpc_setup_partitions_sn_uv(void) } static void -xpc_teardown_partitions_sn_uv(void) +xpc_teardown_partitions_uv(void) { short partid; struct xpc_partition_uv *part_uv; @@ -782,7 +782,7 @@ xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa, } static int -xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp) +xpc_setup_rsvd_page_uv(struct xpc_rsvd_page *rp) { xpc_heartbeat_uv = &xpc_partitions[sn_partition_id].sn.uv.cached_heartbeat; @@ -980,7 +980,7 @@ xpc_n_of_fifo_entries_uv(struct xpc_fifo_head_uv *head) * Setup the channel structures that are uv specific. */ static enum xp_retval -xpc_setup_ch_structures_sn_uv(struct xpc_partition *part) +xpc_setup_ch_structures_uv(struct xpc_partition *part) { struct xpc_channel_uv *ch_uv; int ch_number; @@ -999,7 +999,7 @@ xpc_setup_ch_structures_sn_uv(struct xpc_partition *part) * Teardown the channel structures that are uv specific. */ static void -xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part) +xpc_teardown_ch_structures_uv(struct xpc_partition *part) { /* nothing needs to be done */ return; @@ -1649,63 +1649,67 @@ xpc_received_payload_uv(struct xpc_channel *ch, void *payload) msg->hdr.msg_slot_number += ch->remote_nentries; } +static struct xpc_arch_operations xpc_arch_ops_uv = { + .setup_partitions = xpc_setup_partitions_uv, + .teardown_partitions = xpc_teardown_partitions_uv, + .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv, + .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv, + .setup_rsvd_page = xpc_setup_rsvd_page_uv, + + .allow_hb = xpc_allow_hb_uv, + .disallow_hb = xpc_disallow_hb_uv, + .disallow_all_hbs = xpc_disallow_all_hbs_uv, + .increment_heartbeat = xpc_increment_heartbeat_uv, + .offline_heartbeat = xpc_offline_heartbeat_uv, + .online_heartbeat = xpc_online_heartbeat_uv, + .heartbeat_init = xpc_heartbeat_init_uv, + .heartbeat_exit = xpc_heartbeat_exit_uv, + .get_remote_heartbeat = xpc_get_remote_heartbeat_uv, + + .request_partition_activation = + xpc_request_partition_activation_uv, + .request_partition_reactivation = + xpc_request_partition_reactivation_uv, + .request_partition_deactivation = + xpc_request_partition_deactivation_uv, + .cancel_partition_deactivation_request = + xpc_cancel_partition_deactivation_request_uv, + + .setup_ch_structures = xpc_setup_ch_structures_uv, + .teardown_ch_structures = xpc_teardown_ch_structures_uv, + + .make_first_contact = xpc_make_first_contact_uv, + + .get_chctl_all_flags = xpc_get_chctl_all_flags_uv, + .send_chctl_closerequest = xpc_send_chctl_closerequest_uv, + .send_chctl_closereply = xpc_send_chctl_closereply_uv, + .send_chctl_openrequest = xpc_send_chctl_openrequest_uv, + .send_chctl_openreply = xpc_send_chctl_openreply_uv, + .send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv, + .process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv, + + .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv, + + .setup_msg_structures = xpc_setup_msg_structures_uv, + .teardown_msg_structures = xpc_teardown_msg_structures_uv, + + .indicate_partition_engaged = xpc_indicate_partition_engaged_uv, + .indicate_partition_disengaged = xpc_indicate_partition_disengaged_uv, + .assume_partition_disengaged = xpc_assume_partition_disengaged_uv, + .partition_engaged = xpc_partition_engaged_uv, + .any_partition_engaged = xpc_any_partition_engaged_uv, + + .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv, + .send_payload = xpc_send_payload_uv, + .get_deliverable_payload = xpc_get_deliverable_payload_uv, + .received_payload = xpc_received_payload_uv, + .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv, +}; + int xpc_init_uv(void) { - xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv; - xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_uv; - xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv; - xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv; - xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv; - - xpc_allow_hb = xpc_allow_hb_uv; - xpc_disallow_hb = xpc_disallow_hb_uv; - xpc_disallow_all_hbs = xpc_disallow_all_hbs_uv; - xpc_increment_heartbeat = xpc_increment_heartbeat_uv; - xpc_offline_heartbeat = xpc_offline_heartbeat_uv; - xpc_online_heartbeat = xpc_online_heartbeat_uv; - xpc_heartbeat_init = xpc_heartbeat_init_uv; - xpc_heartbeat_exit = xpc_heartbeat_exit_uv; - xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv; - - xpc_request_partition_activation = xpc_request_partition_activation_uv; - xpc_request_partition_reactivation = - xpc_request_partition_reactivation_uv; - xpc_request_partition_deactivation = - xpc_request_partition_deactivation_uv; - xpc_cancel_partition_deactivation_request = - xpc_cancel_partition_deactivation_request_uv; - - xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv; - xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv; - - xpc_make_first_contact = xpc_make_first_contact_uv; - - xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv; - xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv; - xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv; - xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv; - xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv; - xpc_send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv; - - xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv; - - xpc_setup_msg_structures = xpc_setup_msg_structures_uv; - xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv; - - xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv; - xpc_indicate_partition_disengaged = - xpc_indicate_partition_disengaged_uv; - xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv; - xpc_partition_engaged = xpc_partition_engaged_uv; - xpc_any_partition_engaged = xpc_any_partition_engaged_uv; - - xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv; - xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv; - xpc_send_payload = xpc_send_payload_uv; - xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv; - xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv; - xpc_received_payload = xpc_received_payload_uv; + xpc_arch_ops = xpc_arch_ops_uv; if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) { dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n", -- cgit v0.10.2 From e6da46b273443c8cebef81a68b2d0d955b8a07b4 Mon Sep 17 00:00:00 2001 From: Jeff Haran Date: Mon, 13 Apr 2009 14:40:20 -0700 Subject: edac: fix local pci_write_bits32 Fix the edac local pci_write_bits32 to properly note the 'escape' mask if all ones in a 32-bit word. Currently no consumer of this function uses that mask, so there is no danger to existing code. Signed-off-by: Jeff Haran Signed-off-by: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 28f2c3f..6ad95c8 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -767,11 +767,19 @@ static inline void pci_write_bits16(struct pci_dev *pdev, int offset, pci_write_config_word(pdev, offset, value); } -/* write all or some bits in a dword-register*/ +/* + * pci_write_bits32 + * + * edac local routine to do pci_write_config_dword, but adds + * a mask parameter. If mask is all ones, ignore the mask. + * Otherwise utilize the mask to isolate specified bits + * + * write all or some bits in a dword-register + */ static inline void pci_write_bits32(struct pci_dev *pdev, int offset, u32 value, u32 mask) { - if (mask != 0xffff) { + if (mask != 0xffffffff) { u32 buf; pci_read_config_dword(pdev, offset, &buf); -- cgit v0.10.2 From fbeb4384748abb78531bbe1e80d627412a0abcfa Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 13 Apr 2009 14:40:21 -0700 Subject: edac: use to_delayed_work() The edac-core driver includes code which assumes that the work_struct which is included in every delayed_work is the first member of that structure. This is currently the case but might change in the future, so use to_delayed_work() instead, which doesn't make such an assumption. linux-2.6.30-rc1 has the to_delayed_work() function that will allow this patch to work Signed-off-by: Jean Delvare Signed-off-by: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index ca9113e..a7d2c71 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -389,7 +389,7 @@ static void del_edac_device_from_global_list(struct edac_device_ctl_info */ static void edac_device_workq_function(struct work_struct *work_req) { - struct delayed_work *d_work = (struct delayed_work *)work_req; + struct delayed_work *d_work = to_delayed_work(work_req); struct edac_device_ctl_info *edac_dev = to_edac_device_ctl_work(d_work); mutex_lock(&device_ctls_mutex); diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 25d6694..335b7eb 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -260,7 +260,7 @@ static int edac_mc_assert_error_check_and_clear(void) */ static void edac_mc_workq_function(struct work_struct *work_req) { - struct delayed_work *d_work = (struct delayed_work *)work_req; + struct delayed_work *d_work = to_delayed_work(work_req); struct mem_ctl_info *mci = to_edac_mem_ctl_work(d_work); mutex_lock(&mem_ctls_mutex); diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c index 5b150ae..30b585b 100644 --- a/drivers/edac/edac_pci.c +++ b/drivers/edac/edac_pci.c @@ -233,7 +233,7 @@ EXPORT_SYMBOL_GPL(edac_pci_find); */ static void edac_pci_workq_function(struct work_struct *work_req) { - struct delayed_work *d_work = (struct delayed_work *)work_req; + struct delayed_work *d_work = to_delayed_work(work_req); struct edac_pci_ctl_info *pci = to_edac_pci_ctl_work(d_work); int msec; unsigned long delay; -- cgit v0.10.2 From ccd97bb01c7404ee000bb0627d1864b84fc9d904 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:30:19 +0000 Subject: xtsonic: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/xtsonic.c b/drivers/net/xtsonic.c index a12a721..5a4ad15 100644 --- a/drivers/net/xtsonic.c +++ b/drivers/net/xtsonic.c @@ -108,6 +108,18 @@ static int xtsonic_close(struct net_device *dev) return err; } +static const struct net_device_ops xtsonic_netdev_ops = { + .ndo_open = xtsonic_open, + .ndo_stop = xtsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_get_stats = sonic_get_stats, + .ndo_set_multicast_list = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __init sonic_probe1(struct net_device *dev) { static unsigned version_printed = 0; @@ -205,12 +217,7 @@ static int __init sonic_probe1(struct net_device *dev) lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS * SONIC_BUS_SCALE(lp->dma_bitmode)); - dev->open = xtsonic_open; - dev->stop = xtsonic_close; - dev->hard_start_xmit = sonic_send_packet; - dev->get_stats = sonic_get_stats; - dev->set_multicast_list = &sonic_multicast_list; - dev->tx_timeout = sonic_tx_timeout; + dev->netdev_ops = &xtsonic_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; /* -- cgit v0.10.2 From 80ef1fc82e3feb541f9645322eab7afa778cce98 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:37:59 +0000 Subject: tsi108_eth: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index bb43e7f..0f78f99 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1561,6 +1561,18 @@ static const struct ethtool_ops tsi108_ethtool_ops = { .set_settings = tsi108_set_settings, }; +static const struct net_device_ops tsi108_netdev_ops = { + .ndo_open = tsi108_open, + .ndo_stop = tsi108_close, + .ndo_start_xmit = tsi108_send_packet, + .ndo_set_multicast_list = tsi108_set_rx_mode, + .ndo_get_stats = tsi108_get_stats, + .ndo_do_ioctl = tsi108_do_ioctl, + .ndo_set_mac_address = tsi108_set_mac, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static int tsi108_init_one(struct platform_device *pdev) { @@ -1616,14 +1628,8 @@ tsi108_init_one(struct platform_device *pdev) data->phy_type = einfo->phy_type; data->irq_num = einfo->irq_num; data->id = pdev->id; - dev->open = tsi108_open; - dev->stop = tsi108_close; - dev->hard_start_xmit = tsi108_send_packet; - dev->set_mac_address = tsi108_set_mac; - dev->set_multicast_list = tsi108_set_rx_mode; - dev->get_stats = tsi108_get_stats; netif_napi_add(dev, &data->napi, tsi108_poll, 64); - dev->do_ioctl = tsi108_do_ioctl; + dev->netdev_ops = &tsi108_netdev_ops; dev->ethtool_ops = &tsi108_ethtool_ops; /* Apparently, the Linux networking code won't use scatter-gather -- cgit v0.10.2 From 5a1c28b3e4aa0ac755d73363fd1c84c0063c06be Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:38:54 +0000 Subject: tc35815: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index d91e95b..0ce2db6 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -862,6 +862,22 @@ static int __devinit tc35815_init_dev_addr(struct net_device *dev) return 0; } +static const struct net_device_ops tc35815_netdev_ops = { + .ndo_open = tc35815_open, + .ndo_stop = tc35815_close, + .ndo_start_xmit = tc35815_send_packet, + .ndo_get_stats = tc35815_get_stats, + .ndo_set_multicast_list = tc35815_set_multicast_list, + .ndo_tx_timeout = tc35815_tx_timeout, + .ndo_do_ioctl = tc35815_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tc35815_poll_controller, +#endif +}; + static int __devinit tc35815_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -904,21 +920,12 @@ static int __devinit tc35815_init_one(struct pci_dev *pdev, ioaddr = pcim_iomap_table(pdev)[1]; /* Initialize the device structure. */ - dev->open = tc35815_open; - dev->hard_start_xmit = tc35815_send_packet; - dev->stop = tc35815_close; - dev->get_stats = tc35815_get_stats; - dev->set_multicast_list = tc35815_set_multicast_list; - dev->do_ioctl = tc35815_ioctl; + dev->netdev_ops = &tc35815_netdev_ops; dev->ethtool_ops = &tc35815_ethtool_ops; - dev->tx_timeout = tc35815_tx_timeout; dev->watchdog_timeo = TC35815_TX_TIMEOUT; #ifdef TC35815_NAPI netif_napi_add(dev, &lp->napi, tc35815_poll, NAPI_WEIGHT); #endif -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = tc35815_poll_controller; -#endif dev->irq = pdev->irq; dev->base_addr = (unsigned long)ioaddr; -- cgit v0.10.2 From 7e4fdcb99cd578c800fb7d6c298950a2938f9ca6 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:39:58 +0000 Subject: sun3_82586: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c index e0d8477..a39c0b9 100644 --- a/drivers/net/sun3_82586.c +++ b/drivers/net/sun3_82586.c @@ -331,6 +331,18 @@ out: return ERR_PTR(err); } +static const struct net_device_ops sun3_82586_netdev_ops = { + .ndo_open = sun3_82586_open, + .ndo_stop = sun3_82586_close, + .ndo_start_xmit = sun3_82586_send_packet, + .ndo_set_multicast_list = set_multicast_list, + .ndo_tx_timeout = sun3_82586_timeout, + .ndo_get_stats = sun3_82586_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static int __init sun3_82586_probe1(struct net_device *dev,int ioaddr) { int i, size, retval; @@ -381,13 +393,8 @@ static int __init sun3_82586_probe1(struct net_device *dev,int ioaddr) printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev->mem_start,size, dev->irq); - dev->open = sun3_82586_open; - dev->stop = sun3_82586_close; - dev->get_stats = sun3_82586_get_stats; - dev->tx_timeout = sun3_82586_timeout; + dev->netdev_ops = &sun3_82586_netdev_ops; dev->watchdog_timeo = HZ/20; - dev->hard_start_xmit = sun3_82586_send_packet; - dev->set_multicast_list = set_multicast_list; dev->if_port = 0; return 0; -- cgit v0.10.2 From ebf84eaa927be41a440fd4c8f81e1844922bc0b2 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:40:49 +0000 Subject: sh_eth: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 7b18827..3ab28bb 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1188,6 +1188,19 @@ out: return ret; } +static const struct net_device_ops sh_eth_netdev_ops = { + .ndo_open = sh_eth_open, + .ndo_stop = sh_eth_close, + .ndo_start_xmit = sh_eth_start_xmit, + .ndo_get_stats = sh_eth_get_stats, + .ndo_set_multicast_list = sh_eth_set_multicast_list, + .ndo_tx_timeout = sh_eth_tx_timeout, + .ndo_do_ioctl = sh_eth_do_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static int sh_eth_drv_probe(struct platform_device *pdev) { int ret, i, devno = 0; @@ -1240,13 +1253,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev) mdp->edmac_endian = pd->edmac_endian; /* set function */ - ndev->open = sh_eth_open; - ndev->hard_start_xmit = sh_eth_start_xmit; - ndev->stop = sh_eth_close; - ndev->get_stats = sh_eth_get_stats; - ndev->set_multicast_list = sh_eth_set_multicast_list; - ndev->do_ioctl = sh_eth_do_ioctl; - ndev->tx_timeout = sh_eth_tx_timeout; + ndev->netdev_ops = &sh_eth_netdev_ops; ndev->watchdog_timeo = TX_TIMEOUT; mdp->post_rx = POST_RX >> (devno << 1); -- cgit v0.10.2 From c6e6d8525c415736d961a15c449d8c98cb7562d4 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:41:28 +0000 Subject: macsonic: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index 527166e..acd143d 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -167,6 +167,18 @@ static int macsonic_close(struct net_device* dev) return err; } +static const struct net_device_ops macsonic_netdev_ops = { + .ndo_open = macsonic_open, + .ndo_stop = macsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_set_multicast_list = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_get_stats = sonic_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __init macsonic_init(struct net_device *dev) { struct sonic_local* lp = netdev_priv(dev); @@ -198,12 +210,7 @@ static int __init macsonic_init(struct net_device *dev) lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS * SONIC_BUS_SCALE(lp->dma_bitmode)); - dev->open = macsonic_open; - dev->stop = macsonic_close; - dev->hard_start_xmit = sonic_send_packet; - dev->get_stats = sonic_get_stats; - dev->set_multicast_list = &sonic_multicast_list; - dev->tx_timeout = sonic_tx_timeout; + dev->netdev_ops = &macsonic_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; /* -- cgit v0.10.2 From 5f1fa992382cf8bb82002aaf19fa03bf67330254 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:42:26 +0000 Subject: macb: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/macb.c b/drivers/net/macb.c index f505010..46073de 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -1100,6 +1100,18 @@ static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return phy_mii_ioctl(phydev, if_mii(rq), cmd); } +static const struct net_device_ops macb_netdev_ops = { + .ndo_open = macb_open, + .ndo_stop = macb_close, + .ndo_start_xmit = macb_start_xmit, + .ndo_set_multicast_list = macb_set_rx_mode, + .ndo_get_stats = macb_get_stats, + .ndo_do_ioctl = macb_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __init macb_probe(struct platform_device *pdev) { struct eth_platform_data *pdata; @@ -1175,12 +1187,7 @@ static int __init macb_probe(struct platform_device *pdev) goto err_out_iounmap; } - dev->open = macb_open; - dev->stop = macb_close; - dev->hard_start_xmit = macb_start_xmit; - dev->get_stats = macb_get_stats; - dev->set_multicast_list = macb_set_rx_mode; - dev->do_ioctl = macb_ioctl; + dev->netdev_ops = &macb_netdev_ops; netif_napi_add(dev, &bp->napi, macb_poll, 64); dev->ethtool_ops = &macb_ethtool_ops; -- cgit v0.10.2 From d0174aea3ee8d51a82b5793c3a177efff89121fa Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:43:11 +0000 Subject: mac89x0: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c index 380a1a5..384e072 100644 --- a/drivers/net/mac89x0.c +++ b/drivers/net/mac89x0.c @@ -168,6 +168,17 @@ writereg(struct net_device *dev, int portno, int value) nubus_writew(swab16(value), dev->mem_start + portno); } +static const struct net_device_ops mac89x0_netdev_ops = { + .ndo_open = net_open, + .ndo_stop = net_close, + .ndo_start_xmit = net_send_packet, + .ndo_get_stats = net_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_set_mac_address = set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + /* Probe for the CS8900 card in slot E. We won't bother looking anywhere else until we have a really good reason to do so. */ struct net_device * __init mac89x0_probe(int unit) @@ -280,12 +291,7 @@ struct net_device * __init mac89x0_probe(int unit) printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr); - dev->open = net_open; - dev->stop = net_close; - dev->hard_start_xmit = net_send_packet; - dev->get_stats = net_get_stats; - dev->set_multicast_list = &set_multicast_list; - dev->set_mac_address = &set_mac_address; + dev->netdev_ops = &mac89x0_netdev_ops; err = register_netdev(dev); if (err) -- cgit v0.10.2 From 9b6bfecd6556b9844a70147fe94dd86bb00aee97 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:44:06 +0000 Subject: isa-skeleton: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c index 3126678..73585fd 100644 --- a/drivers/net/isa-skeleton.c +++ b/drivers/net/isa-skeleton.c @@ -181,6 +181,18 @@ out: } #endif +static const struct net_device_ops netcard_netdev_ops = { + .ndo_open = net_open, + .ndo_stop = net_close, + .ndo_start_xmit = net_send_packet, + .ndo_get_stats = net_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_tx_timeout = net_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +}; + /* * This is the real probe routine. Linux has a history of friendly device * probes on the ISA bus. A good device probes avoids doing writes, and @@ -303,13 +315,7 @@ static int __init netcard_probe1(struct net_device *dev, int ioaddr) np = netdev_priv(dev); spin_lock_init(&np->lock); - dev->open = net_open; - dev->stop = net_close; - dev->hard_start_xmit = net_send_packet; - dev->get_stats = net_get_stats; - dev->set_multicast_list = &set_multicast_list; - - dev->tx_timeout = &net_tx_timeout; + dev->netdev_ops = &netcard_netdev_ops; dev->watchdog_timeo = MY_TX_TIMEOUT; err = register_netdev(dev); -- cgit v0.10.2 From 2b1425421212e38c7dade357abaf8804fe236ade Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:44:55 +0000 Subject: ioc3-eth: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c index cbc63ff..c5593f4 100644 --- a/drivers/net/ioc3-eth.c +++ b/drivers/net/ioc3-eth.c @@ -1214,6 +1214,19 @@ static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3) } #endif +static const struct net_device_ops ioc3_netdev_ops = { + .ndo_open = ioc3_open, + .ndo_stop = ioc3_close, + .ndo_start_xmit = ioc3_start_xmit, + .ndo_tx_timeout = ioc3_timeout, + .ndo_get_stats = ioc3_get_stats, + .ndo_set_multicast_list = ioc3_set_multicast_list, + .ndo_do_ioctl = ioc3_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = ioc3_set_mac_address, + .ndo_change_mtu = eth_change_mtu, +}; + static int __devinit ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1310,15 +1323,8 @@ static int __devinit ioc3_probe(struct pci_dev *pdev, ioc3_get_eaddr(ip); /* The IOC3-specific entries in the device structure. */ - dev->open = ioc3_open; - dev->hard_start_xmit = ioc3_start_xmit; - dev->tx_timeout = ioc3_timeout; dev->watchdog_timeo = 5 * HZ; - dev->stop = ioc3_close; - dev->get_stats = ioc3_get_stats; - dev->do_ioctl = ioc3_ioctl; - dev->set_multicast_list = ioc3_set_multicast_list; - dev->set_mac_address = ioc3_set_mac_address; + dev->netdev_ops = &ioc3_netdev_ops; dev->ethtool_ops = &ioc3_ethtool_ops; dev->features = NETIF_F_IP_CSUM; -- cgit v0.10.2 From a95c2a3b9d6615ef6fad69fbb787a208ad6506b3 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 07:45:55 +0000 Subject: eth_v10: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index c9806c5..7a18dc7 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -257,6 +257,23 @@ struct transceiver_ops transceivers[] = struct transceiver_ops* transceiver = &transceivers[0]; +static const struct net_device_ops e100_netdev_ops = { + .ndo_open = e100_open, + .ndo_stop = e100_close, + .ndo_start_xmit = e100_send_packet, + .ndo_tx_timeout = e100_tx_timeout, + .ndo_get_stats = e100_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_do_ioctl = e100_ioctl, + .ndo_set_mac_address = e100_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_config = e100_set_config, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = e100_netpoll, +#endif +}; + #define tx_done(dev) (*R_DMA_CH0_CMD == 0) /* @@ -300,19 +317,8 @@ etrax_ethernet_init(void) /* fill in our handlers so the network layer can talk to us in the future */ - dev->open = e100_open; - dev->hard_start_xmit = e100_send_packet; - dev->stop = e100_close; - dev->get_stats = e100_get_stats; - dev->set_multicast_list = set_multicast_list; - dev->set_mac_address = e100_set_mac_address; dev->ethtool_ops = &e100_ethtool_ops; - dev->do_ioctl = e100_ioctl; - dev->set_config = e100_set_config; - dev->tx_timeout = e100_tx_timeout; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = e100_netpoll; -#endif + dev->netdev_ops = &e100_netdev_ops; spin_lock_init(&np->lock); spin_lock_init(&np->led_lock); -- cgit v0.10.2 From 0ee50254dfe0c96f9eef4fc9fdf47a18d6a12df3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 10 Apr 2009 00:54:07 +0000 Subject: sh: sh7786: modify usb setup timeout judgment bug. This corrects a race with the PHY RST bit not being set properly if the PLL status changes right before timeout. This resulted in it potentially failing even if the device came up in time. Special thanks to Mr. Juha Leppanen and Iwamatsu-san for reporting this out and reviewing it. Reported-by: Juha Leppanen Reviewed-by: Nobuhiro Iwamatsu Tested-by: Paul Mundt Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 5a47e1c..90e8cff 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -143,14 +143,14 @@ static void __init sh7786_usb_setup(void) * Set the PHY and PLL enable bit */ __raw_writel(PHY_ENB | PLL_ENB, USBPCTL1); - while (i-- && - ((__raw_readl(USBST) & ACT_PLL_STATUS) != ACT_PLL_STATUS)) + while (i--) { + if (ACT_PLL_STATUS == (__raw_readl(USBST) & ACT_PLL_STATUS)) { + /* Set the PHY RST bit */ + __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1); + printk(KERN_INFO "sh7786 usb setup done\n"); + break; + } cpu_relax(); - - if (i) { - /* Set the PHY RST bit */ - __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1); - printk(KERN_INFO "sh7786 usb setup done\n"); } } -- cgit v0.10.2 From 03a980d162eb48a79ce21d47f45b9ec7d9db20e9 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Mon, 13 Apr 2009 15:41:50 -0700 Subject: be2net: fix for default setting of pause auto-negotiation This patch fixes the default value of pause auto-negotiation supported by PCS. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index 04f4b73..9592f22 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -319,7 +319,7 @@ be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd) be_cmd_get_flow_control(&adapter->ctrl, &ecmd->tx_pause, &ecmd->rx_pause); - ecmd->autoneg = AUTONEG_ENABLE; + ecmd->autoneg = 0; } static int @@ -328,7 +328,7 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd) struct be_adapter *adapter = netdev_priv(netdev); int status; - if (ecmd->autoneg != AUTONEG_ENABLE) + if (ecmd->autoneg != 0) return -EINVAL; status = be_cmd_set_flow_control(&adapter->ctrl, ecmd->tx_pause, -- cgit v0.10.2 From 1db9e29bb0ff3c9366e8a50fb09ca8dbc364bfd6 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 13 Apr 2009 04:41:01 +0000 Subject: gro: Normalise skb before bypassing GRO on netpoll VLAN path Hi: gro: Normalise skb before bypassing GRO on netpoll VLAN path When we detect netpoll RX on the GRO VLAN path we bail out and call the normal VLAN receive handler. However, the packet needs to be normalised by calling eth_type_trans since that's what the normal path expects (normally the GRO path does the fixup). This patch adds the necessary call to vlan_gro_frags. Signed-off-by: Herbert Xu Thanks, Signed-off-by: David S. Miller diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 654e45f..c67fe6f 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -121,8 +121,10 @@ int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp, if (!skb) return NET_RX_DROP; - if (netpoll_rx_on(skb)) + if (netpoll_rx_on(skb)) { + skb->protocol = eth_type_trans(skb, skb->dev); return vlan_hwaccel_receive_skb(skb, grp, vlan_tci); + } return napi_frags_finish(napi, skb, vlan_gro_common(napi, grp, vlan_tci, skb)); -- cgit v0.10.2 From 17a7b7b39056a82c5012539311850f202e6c3cd4 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Mon, 13 Apr 2009 11:04:19 +0900 Subject: tomoyo: add Documentation/tomoyo.txt Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris diff --git a/Documentation/tomoyo.txt b/Documentation/tomoyo.txt new file mode 100644 index 0000000..b3a232c --- /dev/null +++ b/Documentation/tomoyo.txt @@ -0,0 +1,55 @@ +--- What is TOMOYO? --- + +TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel. + +LiveCD-based tutorials are available at +http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/ +http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ . +Though these tutorials use non-LSM version of TOMOYO, they are useful for you +to know what TOMOYO is. + +--- How to enable TOMOYO? --- + +Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on +kernel's command line. + +Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details. + +--- Where is documentation? --- + +User <-> Kernel interface documentation is available at +http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html . + +Materials we prepared for seminars and symposiums are available at +http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 . +Below lists are chosen from three aspects. + +What is TOMOYO? + TOMOYO Linux Overview + http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf + TOMOYO Linux: pragmatic and manageable security for Linux + http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf + TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box + http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf + +What can TOMOYO do? + Deep inside TOMOYO Linux + http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf + The role of "pathname based access control" in security. + http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf + +History of TOMOYO? + Realities of Mainlining + http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf + +--- What is future plan? --- + +We believe that inode based security and name based security are complementary +and both should be used together. But unfortunately, so far, we cannot enable +multiple LSM modules at the same time. We feel sorry that you have to give up +SELinux/SMACK/AppArmor etc. when you want to use TOMOYO. + +We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM +version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ . +LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning +to port non-LSM version's functionalities to LSM versions. -- cgit v0.10.2 From 39826a1e17c1957bd7b5cd7815b83940e5e3a230 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 8 Apr 2009 22:31:28 +0900 Subject: tomoyo: version bump to 2.2.0. Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c index a0affd9..d4d41b3 100644 --- a/security/tomoyo/common.c +++ b/security/tomoyo/common.c @@ -5,7 +5,7 @@ * * Copyright (C) 2005-2009 NTT DATA CORPORATION * - * Version: 2.2.0-pre 2009/02/01 + * Version: 2.2.0 2009/04/01 * */ @@ -1773,7 +1773,7 @@ void tomoyo_load_policy(const char *filename) envp[2] = NULL; call_usermodehelper(argv[0], argv, envp, 1); - printk(KERN_INFO "TOMOYO: 2.2.0-pre 2009/02/01\n"); + printk(KERN_INFO "TOMOYO: 2.2.0 2009/04/01\n"); printk(KERN_INFO "Mandatory Access Control activated.\n"); tomoyo_policy_loaded = true; { /* Check all profiles currently assigned to domains are defined. */ @@ -1800,7 +1800,7 @@ void tomoyo_load_policy(const char *filename) static int tomoyo_read_version(struct tomoyo_io_buffer *head) { if (!head->read_eof) { - tomoyo_io_printf(head, "2.2.0-pre"); + tomoyo_io_printf(head, "2.2.0"); head->read_eof = true; } return 0; diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h index e77e6a6..678f4ff 100644 --- a/security/tomoyo/common.h +++ b/security/tomoyo/common.h @@ -5,7 +5,7 @@ * * Copyright (C) 2005-2009 NTT DATA CORPORATION * - * Version: 2.2.0-pre 2009/02/01 + * Version: 2.2.0 2009/04/01 * */ diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c index 2f2b449..2d67487 100644 --- a/security/tomoyo/domain.c +++ b/security/tomoyo/domain.c @@ -5,7 +5,7 @@ * * Copyright (C) 2005-2009 NTT DATA CORPORATION * - * Version: 2.2.0-pre 2009/02/01 + * Version: 2.2.0 2009/04/01 * */ diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c index 65f50c1..2316da8 100644 --- a/security/tomoyo/file.c +++ b/security/tomoyo/file.c @@ -5,7 +5,7 @@ * * Copyright (C) 2005-2009 NTT DATA CORPORATION * - * Version: 2.2.0-pre 2009/02/01 + * Version: 2.2.0 2009/04/01 * */ diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index 3bbe01a..bf8e2b4 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -5,7 +5,7 @@ * * Copyright (C) 2005-2009 NTT DATA CORPORATION * - * Version: 2.2.0-pre 2009/02/01 + * Version: 2.2.0 2009/04/01 * */ diff --git a/security/tomoyo/realpath.h b/security/tomoyo/realpath.h index 7ec9fc9c..78217a3 100644 --- a/security/tomoyo/realpath.h +++ b/security/tomoyo/realpath.h @@ -5,7 +5,7 @@ * * Copyright (C) 2005-2009 NTT DATA CORPORATION * - * Version: 2.2.0-pre 2009/02/01 + * Version: 2.2.0 2009/04/01 * */ diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index 3eeeae1..5b48191 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -5,7 +5,7 @@ * * Copyright (C) 2005-2009 NTT DATA CORPORATION * - * Version: 2.2.0-pre 2009/02/01 + * Version: 2.2.0 2009/04/01 * */ diff --git a/security/tomoyo/tomoyo.h b/security/tomoyo/tomoyo.h index a0c8f6e..41c6eba 100644 --- a/security/tomoyo/tomoyo.h +++ b/security/tomoyo/tomoyo.h @@ -5,7 +5,7 @@ * * Copyright (C) 2005-2009 NTT DATA CORPORATION * - * Version: 2.2.0-pre 2009/02/01 + * Version: 2.2.0 2009/04/01 * */ -- cgit v0.10.2 From 132380a06b24704fd6c9be55c44d4ef3972cead2 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 2 Apr 2009 14:18:25 +0800 Subject: tracing, sched: mark get_parent_ip() notrace Impact: remove overly redundant tracing entries When tracer is "function" or "function_graph", way too much "get_parent_ip" entries are recorded in ring_buffer. Signed-off-by: Lai Jiangshan Acked-by: Frederic Weisbecker Acked-by: Steven Rostedt LKML-Reference: <49D458B1.5000703@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 5724508..e90e70e 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4846,7 +4846,7 @@ void scheduler_tick(void) #endif } -unsigned long get_parent_ip(unsigned long addr) +notrace unsigned long get_parent_ip(unsigned long addr) { if (in_lock_functions(addr)) { addr = CALLER_ADDR2; -- cgit v0.10.2 From 557055bebe9212dfa6b9f5df811dfd0dac77ec55 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Mon, 13 Apr 2009 16:02:34 +0800 Subject: tracing: Fix branch tracer header Before patch: # tracer: branch # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <...>-2981 [000] 24008.872738: [ ok ] trace_irq_handler_exit:irq_event_types.h:41 <...>-2981 [000] 24008.872742: [ ok ] note_interrupt:spurious.c:229 ... After patch: # tracer: branch # # TASK-PID CPU# TIMESTAMP CORRECT FUNC:FILE:LINE # | | | | | | <...>-2985 [000] 26329.142970: [ ok ] slab_free:slub.c:1776 <...>-2985 [000] 26329.142972: [ ok ] trace_kmem_cache_free:kmem_event_types.h:191 ... Signed-off-by: Zhao Lei Acked-by: Frederic Weisbecker Cc: Steven Rostedt Cc: Tom Zanussi LKML-Reference: <49E2F19A.3040006@cn.fujitsu.com> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_branch.c b/kernel/trace/trace_branch.c index ad8c22e..8333715 100644 --- a/kernel/trace/trace_branch.c +++ b/kernel/trace/trace_branch.c @@ -155,6 +155,13 @@ static enum print_line_t trace_branch_print(struct trace_iterator *iter, return TRACE_TYPE_HANDLED; } +static void branch_print_header(struct seq_file *s) +{ + seq_puts(s, "# TASK-PID CPU# TIMESTAMP CORRECT" + " FUNC:FILE:LINE\n"); + seq_puts(s, "# | | | | | " + " |\n"); +} static struct trace_event trace_branch_event = { .type = TRACE_BRANCH, @@ -169,6 +176,7 @@ static struct tracer branch_trace __read_mostly = #ifdef CONFIG_FTRACE_SELFTEST .selftest = trace_selftest_startup_branch, #endif /* CONFIG_FTRACE_SELFTEST */ + .print_header = branch_print_header, }; __init static int init_branch_tracer(void) -- cgit v0.10.2 From ff6c6fed3a8ab9b0a7b02574e095e905e89421d9 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sun, 12 Apr 2009 23:24:21 +0530 Subject: x86: pci-swiotlb.c swiotlb_dma_ops should be static Impact: reduce kernel size a bit, address sparse warning Addresses the problem pointed out by this sparse warning: arch/x86/kernel/pci-swiotlb.c:53:20: warning: symbol 'swiotlb_dma_ops' was not declared. Should it be static? For x86: swiotlb_dma_ops can be static, because it's not used outside of pci-swiotlb.c Signed-off-by: Jaswinder Singh Rajput Acked-by: FUJITA Tomonori LKML-Reference: <1239558861.3938.2.camel@localhost.localdomain> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c index 34f12e9..221a385 100644 --- a/arch/x86/kernel/pci-swiotlb.c +++ b/arch/x86/kernel/pci-swiotlb.c @@ -50,7 +50,7 @@ static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size, return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags); } -struct dma_map_ops swiotlb_dma_ops = { +static struct dma_map_ops swiotlb_dma_ops = { .mapping_error = swiotlb_dma_mapping_error, .alloc_coherent = x86_swiotlb_alloc_coherent, .free_coherent = swiotlb_free_coherent, -- cgit v0.10.2 From 1c98aa7424ff163637d8321674ec58dee28152d4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 13 Apr 2009 18:09:20 -0700 Subject: Fix quilt merge error in acpi-cpufreq.c We ended up incorrectly using '&cur' instead of '&readin' in the work_on_cpu() -> smp_call_function_single() transformation in commit 01599fca6758d2cd133e78f87426fc851c9ea725 ("cpufreq: use smp_call_function_[single|many]() in acpi-cpufreq.c"). Andrew explains: "OK, the acpi tree went and had conflicting changes merged into it after I'd written the patch and it appears that I incorrectly reverted part of 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c while fixing the resulting rejects. Switching it to `readin' looks correct." Acked-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 3e3cd3d..837c2c4 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -277,7 +277,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, unsigned int perf_percent; unsigned int retval; - if (smp_call_function_single(cpu, read_measured_perf_ctrs, &cur, 1)) + if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin, 1)) return 0; cur.aperf.whole = readin.aperf.whole - -- cgit v0.10.2 From 1a31f2042e938f1b467aa3d807cc5666352bf8a3 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 13 Apr 2009 18:12:57 -0700 Subject: netsched: Allow meta match on vlan tag on receive When vlan acceleration is used on receive, the vlan tag is maintained outside of the skb data. The existing vlan tag match only works on TX path because it uses vlan_get_tag which tests for VLAN_HW_TX_ACCEL. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c index 72cf86e..fad596b 100644 --- a/net/sched/em_meta.c +++ b/net/sched/em_meta.c @@ -176,8 +176,10 @@ META_COLLECTOR(var_dev) META_COLLECTOR(int_vlan_tag) { - unsigned short uninitialized_var(tag); - if (vlan_get_tag(skb, &tag) < 0) + unsigned short tag; + + tag = vlan_tx_tag_get(skb); + if (!tag && __vlan_get_tag(skb, &tag)) *err = -1; else dst->value = tag; -- cgit v0.10.2 From 63fe08177f92ce21929df8af6361491b98ad12cd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 14 Apr 2009 12:01:53 +1000 Subject: md: tiny md.h cleanups - update inclusion guard and make sure it covers the whole file - remove superflous #ifdef CONFIG_BLOCK - make sure all required headers are included so that new users aren't required to include others before Signed-off-by: Christoph Hellwig Signed-off-by: NeilBrown diff --git a/drivers/md/md.h b/drivers/md/md.h index e9b7f54..8227ab9 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -12,10 +12,17 @@ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef _MD_K_H -#define _MD_K_H - -#ifdef CONFIG_BLOCK +#ifndef _MD_MD_H +#define _MD_MD_H + +#include +#include +#include +#include +#include +#include +#include +#include #define MaxSector (~(sector_t)0) @@ -408,10 +415,6 @@ static inline void safe_put_page(struct page *p) if (p) put_page(p); } -#endif /* CONFIG_BLOCK */ -#endif - - extern int register_md_personality(struct mdk_personality *p); extern int unregister_md_personality(struct mdk_personality *p); extern mdk_thread_t * md_register_thread(void (*run) (mddev_t *mddev), @@ -434,3 +437,5 @@ extern void md_new_event(mddev_t *mddev); extern int md_allow_write(mddev_t *mddev); extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev); extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors); + +#endif /* _MD_MD_H */ -- cgit v0.10.2 From 6d56e278444bc8323b1bcfcada126b8e4dbba0f4 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 14 Apr 2009 12:01:57 +1000 Subject: md: allow setting newly added device to 'in_sync' via sysfs. When adding devices to an active array via sysfs, there is currently no way to mark a device as 'in-sync' which is useful when incrementally assembling an array. So add that option. Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index ed5727c..298731b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2086,6 +2086,7 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len) * -writemostly - clears write_mostly * blocked - sets the Blocked flag * -blocked - clears the Blocked flag + * insync - sets Insync providing device isn't active */ int err = -EINVAL; if (cmd_match(buf, "faulty") && rdev->mddev->pers) { @@ -2118,6 +2119,9 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len) md_wakeup_thread(rdev->mddev->thread); err = 0; + } else if (cmd_match(buf, "insync") && rdev->raid_disk == -1) { + set_bit(In_sync, &rdev->flags); + err = 0; } if (!err && rdev->sysfs_state) sysfs_notify_dirent(rdev->sysfs_state); @@ -2190,7 +2194,7 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len) } else if (rdev->mddev->pers) { mdk_rdev_t *rdev2; /* Activating a spare .. or possibly reactivating - * if we every get bitmaps working here. + * if we ever get bitmaps working here. */ if (rdev->raid_disk != -1) -- cgit v0.10.2 From 7b41f5688c1e03c41c772cd1766d6d80189380dd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 14 Apr 2009 15:22:15 +0900 Subject: sh: Pre-allocate a reasonable number of DMA debug entries. This prevents the DMA API debugging from running out of entries right away on boot. Defines 4096 entries by default, which while a bit on the heavy side, ought to leave enough breathing room for some time. Signed-off-by: Paul Mundt diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 8c9ee85..e098ec1 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -10,12 +10,22 @@ * for more details. */ #include +#include #include #include #include +#include #include #include -#include + +#define PREALLOC_DMA_DEBUG_ENTRIES 4096 + +static int __init dma_init(void) +{ + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + return 0; +} +fs_initcall(dma_init); void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) -- cgit v0.10.2 From e588a00fe546695e93077b3f7b7009f0c31d9370 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 14 Apr 2009 15:23:40 +0900 Subject: sh: Add in PCI bus for DMA API debugging. This adds in the pci_bus_type for DMA API debug. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index e36c7b8..0d6ac7a 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -19,6 +19,7 @@ #include #include #include +#include #include static int __init pcibios_init(void) @@ -43,6 +44,8 @@ static int __init pcibios_init(void) pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); + dma_debug_add_bus(&pci_bus_type); + return 0; } subsys_initcall(pcibios_init); -- cgit v0.10.2 From acb180b0e335ad88acfed6c8a33e39c05b95dc49 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 14 Apr 2009 16:28:34 +1000 Subject: md: improve usefulness and accuracy of sysfs file md/sync_completed. The sync_completed file reports how much of a resync (or recovery or reshape) has been completed. However due to the possibility of out-of-order completion of writes, it is not certain to be accurate. We have an internal value - mddev->curr_resync_completed - which is an accurate value (though it might not always be quite so uptodate). So: - make curr_resync_completed be uptodate a little more often, particularly when raid5 reshape updates status in the metadata - report curr_resync_completed in the sysfs file - allow poll/select to report all updates to md/sync_completed. This makes sync_completed completed usable by any external metadata handler that wants to record this status information in its metadata. Signed-off-by: NeilBrown diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index f8a9f7a..e4510c9 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1479,6 +1479,7 @@ void bitmap_cond_end_sync(struct bitmap *bitmap, sector_t sector) s += blocks; } bitmap->last_end_sync = jiffies; + sysfs_notify(&bitmap->mddev->kobj, NULL, "sync_completed"); } static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed) diff --git a/drivers/md/md.c b/drivers/md/md.c index 298731b..7af64f3 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2017,6 +2017,8 @@ repeat: clear_bit(MD_CHANGE_PENDING, &mddev->flags); spin_unlock_irq(&mddev->write_lock); wake_up(&mddev->sb_wait); + if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) + sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } @@ -3486,12 +3488,15 @@ sync_completed_show(mddev_t *mddev, char *page) { unsigned long max_sectors, resync; + if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) + return sprintf(page, "none\n"); + if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) max_sectors = mddev->resync_max_sectors; else max_sectors = mddev->dev_sectors; - resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active)); + resync = mddev->curr_resync_completed; return sprintf(page, "%lu / %lu\n", resync, max_sectors); } @@ -6338,18 +6343,12 @@ void md_do_sync(mddev_t *mddev) sector_t sectors; skipped = 0; - if (j >= mddev->resync_max) { - sysfs_notify(&mddev->kobj, NULL, "sync_completed"); - wait_event(mddev->recovery_wait, - mddev->resync_max > j - || kthread_should_stop()); - } - if (kthread_should_stop()) - goto interrupted; - if (mddev->curr_resync > mddev->curr_resync_completed && - (mddev->curr_resync - mddev->curr_resync_completed) - > (max_sectors >> 4)) { + if ((mddev->curr_resync > mddev->curr_resync_completed && + (mddev->curr_resync - mddev->curr_resync_completed) + > (max_sectors >> 4)) || + j >= mddev->resync_max + ) { /* time to update curr_resync_completed */ blk_unplug(mddev->queue); wait_event(mddev->recovery_wait, @@ -6357,7 +6356,17 @@ void md_do_sync(mddev_t *mddev) mddev->curr_resync_completed = mddev->curr_resync; set_bit(MD_CHANGE_CLEAN, &mddev->flags); + sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } + + if (j >= mddev->resync_max) + wait_event(mddev->recovery_wait, + mddev->resync_max > j + || kthread_should_stop()); + + if (kthread_should_stop()) + goto interrupted; + sectors = mddev->pers->sync_request(mddev, j, &skipped, currspeed < speed_min(mddev)); if (sectors == 0) { @@ -6465,6 +6474,7 @@ void md_do_sync(mddev_t *mddev) skip: mddev->curr_resync = 0; + mddev->curr_resync_completed = 0; mddev->resync_min = 0; mddev->resync_max = MaxSector; sysfs_notify(&mddev->kobj, NULL, "sync_completed"); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 3bbc6d6..76892ac 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3845,6 +3845,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped wait_event(conf->wait_for_overlap, atomic_read(&conf->reshape_stripes)==0); mddev->reshape_position = conf->reshape_progress; + mddev->curr_resync_completed = mddev->curr_resync; conf->reshape_checkpoint = jiffies; set_bit(MD_CHANGE_DEVS, &mddev->flags); md_wakeup_thread(mddev->thread); @@ -3854,6 +3855,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped conf->reshape_safe = mddev->reshape_position; spin_unlock_irq(&conf->device_lock); wake_up(&conf->wait_for_overlap); + sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } if (mddev->delta_disks < 0) { @@ -3943,6 +3945,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped wait_event(conf->wait_for_overlap, atomic_read(&conf->reshape_stripes) == 0); mddev->reshape_position = conf->reshape_progress; + mddev->curr_resync_completed = mddev->curr_resync; conf->reshape_checkpoint = jiffies; set_bit(MD_CHANGE_DEVS, &mddev->flags); md_wakeup_thread(mddev->thread); @@ -3953,6 +3956,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped conf->reshape_safe = mddev->reshape_position; spin_unlock_irq(&conf->device_lock); wake_up(&conf->wait_for_overlap); + sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } return reshape_sectors; } -- cgit v0.10.2 From 5a9bd51810bce6ac79b65f07116035b6b217986e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 13 Apr 2009 20:51:22 +0200 Subject: microblaze: Fix problem with removing zero length files Adding one new line was recommended solution. Test with make distclean Tested-by: Jeff Garzik Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/auxvec.h b/arch/microblaze/include/asm/auxvec.h index e69de29..8b13789 100644 --- a/arch/microblaze/include/asm/auxvec.h +++ b/arch/microblaze/include/asm/auxvec.h @@ -0,0 +1 @@ + diff --git a/arch/microblaze/include/asm/cputable.h b/arch/microblaze/include/asm/cputable.h index e69de29..8b13789 100644 --- a/arch/microblaze/include/asm/cputable.h +++ b/arch/microblaze/include/asm/cputable.h @@ -0,0 +1 @@ + diff --git a/arch/microblaze/include/asm/hw_irq.h b/arch/microblaze/include/asm/hw_irq.h index e69de29..8b13789 100644 --- a/arch/microblaze/include/asm/hw_irq.h +++ b/arch/microblaze/include/asm/hw_irq.h @@ -0,0 +1 @@ + diff --git a/arch/microblaze/include/asm/user.h b/arch/microblaze/include/asm/user.h index e69de29..8b13789 100644 --- a/arch/microblaze/include/asm/user.h +++ b/arch/microblaze/include/asm/user.h @@ -0,0 +1 @@ + diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h index e69de29..8b13789 100644 --- a/arch/microblaze/include/asm/vga.h +++ b/arch/microblaze/include/asm/vga.h @@ -0,0 +1 @@ + -- cgit v0.10.2 From 6c149fd7cda601ebd178dd2f07ccff6bb0d010cf Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 14 Apr 2009 08:37:30 +0200 Subject: microblaze: Add missing empty ftrace.h file Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h new file mode 100644 index 0000000..8b13789 --- /dev/null +++ b/arch/microblaze/include/asm/ftrace.h @@ -0,0 +1 @@ + -- cgit v0.10.2 From 39141bfcad22e6d7393c0d0f81b2e180db6983df Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 14 Apr 2009 09:16:01 +0200 Subject: microblaze: Add TIMESTAMPING constants to socket.h This changes was introduce with commit: cb9eff097831007afb30d64373f29d99825d0068 net: new user space API for time stamping of incoming and outgoing packets Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h index f919b6b..8259368 100644 --- a/arch/microblaze/include/asm/socket.h +++ b/arch/microblaze/include/asm/socket.h @@ -63,4 +63,7 @@ #define SO_MARK 36 +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + #endif /* _ASM_MICROBLAZE_SOCKET_H */ -- cgit v0.10.2 From a8fb748e89957426fafb2e2efccd5ce635d6f530 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 14 Apr 2009 09:18:19 +0200 Subject: microblaze: Simplify copy_thread() Removing nr parameter from copy_tread function commit 6f2c55b843836d26528c56a0968689accaedbc67 Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 60e9ed7..436f26c 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -115,8 +115,7 @@ void flush_thread(void) { } -/* FIXME - here will be a proposed change -> remove nr parameter */ -int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, +int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long unused, struct task_struct *p, struct pt_regs *regs) { -- cgit v0.10.2 From 5a86dc1a749211fd87341ee7943f985cde71ea11 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 14 Apr 2009 09:38:06 +0200 Subject: microblaze: struct device - replace bus_id with dev_name() Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c index 717edf4..9a0f7632 100644 --- a/arch/microblaze/kernel/of_device.c +++ b/arch/microblaze/kernel/of_device.c @@ -13,7 +13,6 @@ void of_device_make_bus_id(struct of_device *dev) { static atomic_t bus_no_reg_magic; struct device_node *node = dev->node; - char *name = dev->dev.bus_id; const u32 *reg; u64 addr; int magic; @@ -25,9 +24,8 @@ void of_device_make_bus_id(struct of_device *dev) if (reg) { addr = of_translate_address(node, reg); if (addr != OF_BAD_ADDR) { - snprintf(name, BUS_ID_SIZE, - "%llx.%s", (unsigned long long)addr, - node->name); + dev_set_name(&dev->dev, "%llx.%s", + (unsigned long long)addr, node->name); return; } } @@ -37,7 +35,7 @@ void of_device_make_bus_id(struct of_device *dev) * counter (and pray...) */ magic = atomic_add_return(1, &bus_no_reg_magic); - snprintf(name, BUS_ID_SIZE, "%s.%d", node->name, magic - 1); + dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1); } EXPORT_SYMBOL(of_device_make_bus_id); @@ -58,7 +56,7 @@ struct of_device *of_device_alloc(struct device_node *np, dev->dev.archdata.of_node = np; if (bus_id) - strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE); + dev_set_name(&dev->dev, bus_id); else of_device_make_bus_id(dev); -- cgit v0.10.2 From 86bcebafc5e7f5163ccf828792fe694b112ed6fa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 14 Apr 2009 02:08:53 -0700 Subject: tcp: fix >2 iw selection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A long-standing feature in tcp_init_metrics() is such that any of its goto reset prevents call to tcp_init_cwnd(). Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 2bc8e27..c96a6bb 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -928,6 +928,8 @@ static void tcp_init_metrics(struct sock *sk) tcp_set_rto(sk); if (inet_csk(sk)->icsk_rto < TCP_TIMEOUT_INIT && !tp->rx_opt.saw_tstamp) goto reset; + +cwnd: tp->snd_cwnd = tcp_init_cwnd(tp, dst); tp->snd_cwnd_stamp = tcp_time_stamp; return; @@ -942,6 +944,7 @@ reset: tp->mdev = tp->mdev_max = tp->rttvar = TCP_TIMEOUT_INIT; inet_csk(sk)->icsk_rto = TCP_TIMEOUT_INIT; } + goto cwnd; } static void tcp_update_reordering(struct sock *sk, const int metric, -- cgit v0.10.2 From 00300d6746b96ca9dba100ea9ea8d01737cc9a4d Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 14 Apr 2009 06:56:15 +0800 Subject: microblaze: remove duplicated #include's Remove duplicated #include's in arch/microblaze/include/asm/io.h arch/microblaze/kernel/prom.c arch/microblaze/kernel/ptrace.c arch/microblaze/kernel/signal.c arch/microblaze/kernel/sys_microblaze.c Signed-off-by: Huang Weiyi Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index cfab034..8b5853e 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -12,7 +12,6 @@ #include #include #include -#include #define IO_SPACE_LIMIT (0xFFFFFFFF) diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 475b1fa..34c4871 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index 3171e39..b86aa62 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -32,7 +32,6 @@ #include #include -#include #include #include #include diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index ff347b9..3889cf4 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index d90b548..ba0568c 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -29,9 +29,7 @@ #include #include #include -#include #include -#include #include #include -- cgit v0.10.2 From 0eca93bcf73e5939053a94f7c48f8d6fe6199e00 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 14 Apr 2009 02:09:43 -0700 Subject: tun: Fix crash with non-GSO users When I made the tun driver use non-linear packets as the preferred option, it broke non-GSO users because they would end up allocating a completely non-linear packet, which triggers a crash when we call eth_type_trans. This patch reverts non-GSO users to using linear packets and adds a check to ensure that GSO users can't cause crashes in the same way. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index a1b0697..16716ae 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -518,7 +518,7 @@ static inline struct sk_buff *tun_alloc_skb(struct tun_struct *tun, int err; /* Under a page? Don't bother with paged skb. */ - if (prepad + len < PAGE_SIZE) + if (prepad + len < PAGE_SIZE || !linear) linear = len; skb = sock_alloc_send_pskb(sk, prepad + linear, len - linear, noblock, @@ -565,7 +565,8 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun, if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) { align = NET_IP_ALIGN; - if (unlikely(len < ETH_HLEN)) + if (unlikely(len < ETH_HLEN || + (gso.hdr_len && gso.hdr_len < ETH_HLEN))) return -EINVAL; } -- cgit v0.10.2 From 27b19565fe4ca5b0e9d2ae98ce4b81ca728bf445 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 14 Apr 2009 11:03:12 +0200 Subject: lockdep: warn about lockdep disabling after kernel taint, fix Impact: build fix for Sparc and s390 Stephen Rothwell reported that the Sparc build broke: In file included from kernel/panic.c:12: include/linux/debug_locks.h: In function '__debug_locks_off': include/linux/debug_locks.h:15: error: implicit declaration of function 'xchg' due to: 9eeba61: lockdep: warn about lockdep disabling after kernel taint There is some inconsistency between architectures about where exactly xchg() is defined. The traditional place is in system.h but the more logical point for it is in atomic.h - where most architectures (especially new ones) have it defined. These architecture also still offer it via system.h. Some, such as Sparc or s390 only have it in asm/system.h and not available via asm/atomic.h at all. Use the widest set of headers in debug_locks.h and also include asm/system.h. Reported-by: Stephen Rothwell Cc: Frederic Weisbecker Cc: "David S. Miller" Cc: Linus Torvalds LKML-Reference: <20090414144317.026498df.sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 493dedb..29b3ce3 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -3,6 +3,7 @@ #include #include +#include struct task_struct; -- cgit v0.10.2 From ce8632ba6b3ed0bf2efa98672e2808de34250389 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Mon, 13 Apr 2009 15:51:00 +0000 Subject: ipv6:remove useless check After switch (rthdr->type) {...},the check below is completely useless.Because: if the type is 2,then hdrlen must be 2 and segments_left must be 1,clearly the check is redundant;if the type is not 2,then goto sticky_done,the check is useless too. Signed-off-by: Yang Hongyang Reviewed-by: Shan Wei Signed-off-by: David S. Miller diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index d31df0f..a7fdf9a 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -380,10 +380,6 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, default: goto sticky_done; } - - if ((rthdr->hdrlen & 1) || - (rthdr->hdrlen >> 1) != rthdr->segments_left) - goto sticky_done; } retv = 0; -- cgit v0.10.2 From ef631b0ca01655d24e9ca7e199262c4a46416a26 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 13 Apr 2009 21:31:16 -0700 Subject: rcu: Make hierarchical RCU less IPI-happy This patch fixes a hierarchical-RCU performance bug located by Anton Blanchard. The problem stems from a misguided attempt to provide a work-around for jiffies-counter failure. This work-around uses a per-CPU n_rcu_pending counter, which is incremented on each call to rcu_pending(), which in turn is called from each scheduling-clock interrupt. Each CPU then treats this counter as a surrogate for the jiffies counter, so that if the jiffies counter fails to advance, the per-CPU n_rcu_pending counter will cause RCU to invoke force_quiescent_state(), which in turn will (among other things) send resched IPIs to CPUs that have thus far failed to pass through an RCU quiescent state. Unfortunately, each CPU resets only its own counter after sending a batch of IPIs. This means that the other CPUs will also (needlessly) send -another- round of IPIs, for a full N-squared set of IPIs in the worst case every three scheduler-clock ticks until the grace period finally ends. It is not reasonable for a given CPU to reset each and every n_rcu_pending for all the other CPUs, so this patch instead simply disables the jiffies-counter "training wheels", thus eliminating the excessive IPIs. Note that the jiffies-counter IPIs do not have this problem due to the fact that the jiffies counter is global, so that the CPU sending the IPIs can easily reset things, thus preventing the other CPUs from sending redundant IPIs. Note also that the n_rcu_pending counter remains, as it will continue to be used for tracing. It may also see use to update the jiffies counter, should an appropriate kick-the-jiffies-counter API appear. Located-by: Anton Blanchard Tested-by: Anton Blanchard Signed-off-by: Paul E. McKenney Cc: anton@samba.org Cc: akpm@linux-foundation.org Cc: dipankar@in.ibm.com Cc: manfred@colorfullife.com Cc: cl@linux-foundation.org Cc: josht@linux.vnet.ibm.com Cc: schamp@sgi.com Cc: niv@us.ibm.com Cc: dvhltc@us.ibm.com Cc: ego@in.ibm.com Cc: laijs@cn.fujitsu.com Cc: rostedt@goodmis.org Cc: peterz@infradead.org Cc: penberg@cs.helsinki.fi Cc: andi@firstfloor.org Cc: "Paul E. McKenney" LKML-Reference: <12396834793575-git-send-email-> Signed-off-by: Ingo Molnar diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 0cdda00..58b2aa5 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -161,9 +161,8 @@ struct rcu_data { unsigned long offline_fqs; /* Kicked due to being offline. */ unsigned long resched_ipi; /* Sent a resched IPI. */ - /* 5) state to allow this CPU to force_quiescent_state on others */ + /* 5) For future __rcu_pending statistics. */ long n_rcu_pending; /* rcu_pending() calls since boot. */ - long n_rcu_pending_force_qs; /* when to force quiescent states. */ int cpu; }; diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 7f32669..d2a372f 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -530,8 +530,6 @@ static void note_new_gpnum(struct rcu_state *rsp, struct rcu_data *rdp) rdp->qs_pending = 1; rdp->passed_quiesc = 0; rdp->gpnum = rsp->gpnum; - rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + - RCU_JIFFIES_TILL_FORCE_QS; } /* @@ -578,8 +576,6 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags) rsp->gpnum++; rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */ rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS; - rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + - RCU_JIFFIES_TILL_FORCE_QS; record_gp_stall_check_time(rsp); dyntick_record_completed(rsp, rsp->completed - 1); note_new_gpnum(rsp, rdp); @@ -1055,7 +1051,6 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) { unsigned long flags; long lastcomp; - struct rcu_data *rdp = rsp->rda[smp_processor_id()]; struct rcu_node *rnp = rcu_get_root(rsp); u8 signaled; @@ -1066,16 +1061,13 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) return; /* Someone else is already on the job. */ } if (relaxed && - (long)(rsp->jiffies_force_qs - jiffies) >= 0 && - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0) + (long)(rsp->jiffies_force_qs - jiffies) >= 0) goto unlock_ret; /* no emergency and done recently. */ rsp->n_force_qs++; spin_lock(&rnp->lock); lastcomp = rsp->completed; signaled = rsp->signaled; rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS; - rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + - RCU_JIFFIES_TILL_FORCE_QS; if (lastcomp == rsp->gpnum) { rsp->n_force_qs_ngp++; spin_unlock(&rnp->lock); @@ -1144,8 +1136,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) * If an RCU GP has gone long enough, go check for dyntick * idle CPUs and, if needed, send resched IPIs. */ - if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0) + if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0) force_quiescent_state(rsp, 1); /* @@ -1230,8 +1221,7 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), if (unlikely(++rdp->qlen > qhimark)) { rdp->blimit = LONG_MAX; force_quiescent_state(rsp, 0); - } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0) + } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0) force_quiescent_state(rsp, 1); local_irq_restore(flags); } @@ -1290,8 +1280,7 @@ static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp) /* Has an RCU GP gone long enough to send resched IPIs &c? */ if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) && - ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)) + ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)) return 1; /* nothing to do */ diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index 4ee954f..4b1875b 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -49,14 +49,12 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp) { if (!rdp->beenonline) return; - seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x", + seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d", rdp->cpu, cpu_is_offline(rdp->cpu) ? '!' : ' ', rdp->completed, rdp->gpnum, rdp->passed_quiesc, rdp->passed_quiesc_completed, - rdp->qs_pending, - rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending, - (int)(rdp->n_rcu_pending & 0xffff)); + rdp->qs_pending); #ifdef CONFIG_NO_HZ seq_printf(m, " dt=%d/%d dn=%d df=%lu", rdp->dynticks->dynticks, @@ -102,14 +100,12 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp) { if (!rdp->beenonline) return; - seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld", + seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d", rdp->cpu, cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"", rdp->completed, rdp->gpnum, rdp->passed_quiesc, rdp->passed_quiesc_completed, - rdp->qs_pending, - rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending, - rdp->n_rcu_pending); + rdp->qs_pending); #ifdef CONFIG_NO_HZ seq_printf(m, ",%d,%d,%d,%lu", rdp->dynticks->dynticks, @@ -123,7 +119,7 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp) static int show_rcudata_csv(struct seq_file *m, void *unused) { - seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\","); + seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\","); #ifdef CONFIG_NO_HZ seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\","); #endif /* #ifdef CONFIG_NO_HZ */ -- cgit v0.10.2 From 0a8c791437db4937bd160570f594d0286d3dd78d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 14 Apr 2009 11:38:57 +0200 Subject: microblaze: Add missing FILE tag to MAINTAINERS Signed-off-by: Michal Simek diff --git a/MAINTAINERS b/MAINTAINERS index ca2997a..782ea4f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3680,6 +3680,7 @@ L: microblaze-uclinux@itee.uq.edu.au W: http://www.monstr.eu/fdt/ T: git git://git.monstr.eu/linux-2.6-microblaze.git S: Supported +F: arch/microblaze/ MICROTEK X6 SCANNER P: Oliver Neukum -- cgit v0.10.2 From 6cececfcece2b072d29886ed7140495f3af17153 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Tue, 14 Apr 2009 14:03:43 +0530 Subject: x86, documentation: kernel-parameters replace X86-32,X86-64 with X86 X86 is same as X86-32+X86-64 so replace X86-32,X86-64 with X86. Signed-off-by: Jaswinder Singh Rajput LKML-Reference: <1239698023.3033.37.camel@ht.satnam> Signed-off-by: Ingo Molnar diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 6172e43..a19f021 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file ./include/asm/setup.h as COMMAND_LINE_SIZE. - acpi= [HW,ACPI,X86-64,i386] + acpi= [HW,ACPI,X86] Advanced Configuration and Power Interface Format: { force | off | ht | strict | noirq | rsdt } force -- enable ACPI if default was off @@ -218,7 +218,7 @@ and is between 256 and 4096 characters. It is defined in the file acpi_osi="!string2" # remove built-in string2 acpi_osi= # disable all strings - acpi_pm_good [X86-32,X86-64] + acpi_pm_good [X86] Override the pmtimer bug detection: force the kernel to assume that this machine's pmtimer latches its value and always returns good values. @@ -459,7 +459,7 @@ and is between 256 and 4096 characters. It is defined in the file Also note the kernel might malfunction if you disable some critical bits. - code_bytes [IA32/X86_64] How many bytes of object code to print + code_bytes [X86] How many bytes of object code to print in an oops report. Range: 0 - 8192 Default: 64 @@ -592,7 +592,7 @@ and is between 256 and 4096 characters. It is defined in the file MTRR settings. This parameter disables that behavior, possibly causing your machine to run very slowly. - disable_timer_pin_1 [i386,x86-64] + disable_timer_pin_1 [X86] Disable PIN 1 of APIC timer Can be useful to work around chipset bugs. @@ -624,7 +624,7 @@ and is between 256 and 4096 characters. It is defined in the file UART at the specified I/O port or MMIO address. The options are the same as for ttyS, above. - earlyprintk= [X86-32,X86-64,SH,BLACKFIN] + earlyprintk= [X86,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] earlyprintk=dbgp @@ -659,7 +659,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/block/as-iosched.txt and Documentation/block/deadline-iosched.txt for details. - elfcorehdr= [IA64,PPC,SH,X86-32,X86_64] + elfcorehdr= [IA64,PPC,SH,X86] Specifies physical address of start of kernel core image elf header. Generally kexec loader will pass this option to capture kernel. @@ -938,7 +938,7 @@ and is between 256 and 4096 characters. It is defined in the file See comment before marvel_specify_io7 in arch/alpha/kernel/core_marvel.c. - io_delay= [X86-32,X86-64] I/O delay method + io_delay= [X86] I/O delay method 0x80 Standard port 0x80 based delay 0xed @@ -1000,7 +1000,7 @@ and is between 256 and 4096 characters. It is defined in the file keepinitrd [HW,ARM] - kernelcore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter + kernelcore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter specifies the amount of memory usable by the kernel for non-movable allocations. The requested amount is spread evenly throughout all nodes in the system. The @@ -1034,7 +1034,7 @@ and is between 256 and 4096 characters. It is defined in the file Configure the RouterBoard 532 series on-chip Ethernet adapter MAC address. - kstack=N [X86-32,X86-64] Print N words from the kernel stack + kstack=N [X86] Print N words from the kernel stack in oops dumps. l2cr= [PPC] @@ -1044,7 +1044,7 @@ and is between 256 and 4096 characters. It is defined in the file lapic [X86-32,APIC] Enable the local APIC even if BIOS disabled it. - lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer + lapic_timer_c2_ok [X86,APIC] trust the local apic timer in C2 power state. libata.dma= [LIBATA] DMA control @@ -1229,7 +1229,7 @@ and is between 256 and 4096 characters. It is defined in the file [KNL,SH] Allow user to override the default size for per-device physically contiguous DMA buffers. - memmap=exactmap [KNL,X86-32,X86_64] Enable setting of an exact + memmap=exactmap [KNL,X86] Enable setting of an exact E820 memory map, as specified by the user. Such memmap=exactmap lines can be constructed based on BIOS output or other requirements. See the memmap=nn@ss @@ -1320,7 +1320,7 @@ and is between 256 and 4096 characters. It is defined in the file mousedev.yres= [MOUSE] Vertical screen resolution, used for devices reporting absolute coordinates, such as tablets - movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter + movablecore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter is similar to kernelcore except it specifies the amount of memory used for migratable allocations. If both kernelcore and movablecore is specified, @@ -1422,7 +1422,7 @@ and is between 256 and 4096 characters. It is defined in the file when a NMI is triggered. Format: [state][,regs][,debounce][,die] - nmi_watchdog= [KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels + nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels Format: [panic,][num] Valid num: 0,1,2 0 - turn nmi_watchdog off @@ -1475,11 +1475,11 @@ and is between 256 and 4096 characters. It is defined in the file nodsp [SH] Disable hardware DSP at boot time. - noefi [X86-32,X86-64] Disable EFI runtime services support. + noefi [X86] Disable EFI runtime services support. noexec [IA-64] - noexec [X86-32,X86-64] + noexec [X86] On X86-32 available only on PAE configured kernels. noexec=on: enable non-executable mappings (default) noexec=off: disable non-executable mappings @@ -1525,7 +1525,7 @@ and is between 256 and 4096 characters. It is defined in the file noirqdebug [X86-32] Disables the code which attempts to detect and disable unhandled interrupt sources. - no_timer_check [X86-32,X86_64,APIC] Disables the code which tests for + no_timer_check [X86,APIC] Disables the code which tests for broken timer IRQ sources. noisapnp [ISAPNP] Disables ISA PnP code. @@ -1689,7 +1689,7 @@ and is between 256 and 4096 characters. It is defined in the file disable the use of PCIE advanced error reporting. nodomains [PCI] Disable support for multiple PCI root domains (aka PCI segments, in ACPI-speak). - nommconf [X86-32,X86_64] Disable use of MMCONFIG for PCI + nommconf [X86] Disable use of MMCONFIG for PCI Configuration nomsi [MSI] If the PCI_MSI kernel config parameter is enabled, this kernel boot option can be used to @@ -2380,7 +2380,7 @@ and is between 256 and 4096 characters. It is defined in the file reported either. unknown_nmi_panic - [X86-32,X86-64] + [X86] Set unknown_nmi_panic=1 early on boot. usbcore.autosuspend= @@ -2447,12 +2447,12 @@ and is between 256 and 4096 characters. It is defined in the file medium is write-protected). Example: quirks=0419:aaf5:rl,0421:0433:rc - vdso= [X86-32,SH,x86-64] + vdso= [X86,SH] vdso=2: enable compat VDSO (default with COMPAT_VDSO) vdso=1: enable VDSO (default) vdso=0: disable VDSO mapping - vdso32= [X86-32,X86-64] + vdso32= [X86] vdso32=2: enable compat VDSO (default with COMPAT_VDSO) vdso32=1: enable 32-bit VDSO (default) vdso32=0: disable 32-bit VDSO mapping -- cgit v0.10.2 From ef44a1ec6eeef189998f84e7230e1d3535b01074 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 10 Apr 2009 09:43:08 +0800 Subject: ALSA: sound/core: use memdup_user() Remove open-coded memdup_user(). Signed-off-by: Li Zefan Signed-off-by: Takashi Iwai diff --git a/sound/core/control.c b/sound/core/control.c index 4b20fa2..17b8d47 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -723,14 +723,11 @@ static int snd_ctl_elem_read_user(struct snd_card *card, { struct snd_ctl_elem_value *control; int result; - - control = kmalloc(sizeof(*control), GFP_KERNEL); - if (control == NULL) - return -ENOMEM; - if (copy_from_user(control, _control, sizeof(*control))) { - kfree(control); - return -EFAULT; - } + + control = memdup_user(_control, sizeof(*control)); + if (IS_ERR(control)) + return PTR_ERR(control); + snd_power_lock(card); result = snd_power_wait(card, SNDRV_CTL_POWER_D0); if (result >= 0) @@ -784,13 +781,10 @@ static int snd_ctl_elem_write_user(struct snd_ctl_file *file, struct snd_card *card; int result; - control = kmalloc(sizeof(*control), GFP_KERNEL); - if (control == NULL) - return -ENOMEM; - if (copy_from_user(control, _control, sizeof(*control))) { - kfree(control); - return -EFAULT; - } + control = memdup_user(_control, sizeof(*control)); + if (IS_ERR(control)) + return PTR_ERR(control); + card = file->card; snd_power_lock(card); result = snd_power_wait(card, SNDRV_CTL_POWER_D0); @@ -916,13 +910,10 @@ static int snd_ctl_elem_user_tlv(struct snd_kcontrol *kcontrol, if (op_flag > 0) { if (size > 1024 * 128) /* sane value */ return -EINVAL; - new_data = kmalloc(size, GFP_KERNEL); - if (new_data == NULL) - return -ENOMEM; - if (copy_from_user(new_data, tlv, size)) { - kfree(new_data); - return -EFAULT; - } + + new_data = memdup_user(tlv, size); + if (IS_ERR(new_data)) + return PTR_ERR(new_data); change = ue->tlv_data_size != size; if (!change) change = memcmp(ue->tlv_data, new_data, size); diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c index 36d7a59..08bfed5 100644 --- a/sound/core/pcm_compat.c +++ b/sound/core/pcm_compat.c @@ -232,14 +232,11 @@ static int snd_pcm_ioctl_hw_params_compat(struct snd_pcm_substream *substream, if (! (runtime = substream->runtime)) return -ENOTTY; - data = kmalloc(sizeof(*data), GFP_KERNEL); - if (data == NULL) - return -ENOMEM; /* only fifo_size is different, so just copy all */ - if (copy_from_user(data, data32, sizeof(*data32))) { - err = -EFAULT; - goto error; - } + data = memdup_user(data32, sizeof(*data32)); + if (IS_ERR(data)) + return PTR_ERR(data); + if (refine) err = snd_pcm_hw_refine(substream, data); else diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index a151fb0..fc6f98e 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -327,21 +327,16 @@ static int snd_pcm_hw_refine_user(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params; int err; - params = kmalloc(sizeof(*params), GFP_KERNEL); - if (!params) { - err = -ENOMEM; - goto out; - } - if (copy_from_user(params, _params, sizeof(*params))) { - err = -EFAULT; - goto out; - } + params = memdup_user(_params, sizeof(*params)); + if (IS_ERR(params)) + return PTR_ERR(params); + err = snd_pcm_hw_refine(substream, params); if (copy_to_user(_params, params, sizeof(*params))) { if (!err) err = -EFAULT; } -out: + kfree(params); return err; } @@ -465,21 +460,16 @@ static int snd_pcm_hw_params_user(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params; int err; - params = kmalloc(sizeof(*params), GFP_KERNEL); - if (!params) { - err = -ENOMEM; - goto out; - } - if (copy_from_user(params, _params, sizeof(*params))) { - err = -EFAULT; - goto out; - } + params = memdup_user(_params, sizeof(*params)); + if (IS_ERR(params)) + return PTR_ERR(params); + err = snd_pcm_hw_params(substream, params); if (copy_to_user(_params, params, sizeof(*params))) { if (!err) err = -EFAULT; } -out: + kfree(params); return err; } @@ -2593,13 +2583,11 @@ static int snd_pcm_playback_ioctl1(struct file *file, return -EFAULT; if (copy_from_user(&xfern, _xfern, sizeof(xfern))) return -EFAULT; - bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL); - if (bufs == NULL) - return -ENOMEM; - if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) { - kfree(bufs); - return -EFAULT; - } + + bufs = memdup_user(xfern.bufs, + sizeof(void *) * runtime->channels); + if (IS_ERR(bufs)) + return PTR_ERR(bufs); result = snd_pcm_lib_writev(substream, bufs, xfern.frames); kfree(bufs); __put_user(result, &_xfern->result); @@ -2675,13 +2663,11 @@ static int snd_pcm_capture_ioctl1(struct file *file, return -EFAULT; if (copy_from_user(&xfern, _xfern, sizeof(xfern))) return -EFAULT; - bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL); - if (bufs == NULL) - return -ENOMEM; - if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) { - kfree(bufs); - return -EFAULT; - } + + bufs = memdup_user(xfern.bufs, + sizeof(void *) * runtime->channels); + if (IS_ERR(bufs)) + return PTR_ERR(bufs); result = snd_pcm_lib_readv(substream, bufs, xfern.frames); kfree(bufs); __put_user(result, &_xfern->result); @@ -3312,18 +3298,12 @@ static int snd_pcm_hw_refine_old_user(struct snd_pcm_substream *substream, int err; params = kmalloc(sizeof(*params), GFP_KERNEL); - if (!params) { - err = -ENOMEM; - goto out; - } - oparams = kmalloc(sizeof(*oparams), GFP_KERNEL); - if (!oparams) { - err = -ENOMEM; - goto out; - } + if (!params) + return -ENOMEM; - if (copy_from_user(oparams, _oparams, sizeof(*oparams))) { - err = -EFAULT; + oparams = memdup_user(_oparams, sizeof(*oparams)); + if (IS_ERR(oparams)) { + err = PTR_ERR(oparams); goto out; } snd_pcm_hw_convert_from_old_params(params, oparams); @@ -3333,9 +3313,10 @@ static int snd_pcm_hw_refine_old_user(struct snd_pcm_substream *substream, if (!err) err = -EFAULT; } + + kfree(oparams); out: kfree(params); - kfree(oparams); return err; } @@ -3347,17 +3328,12 @@ static int snd_pcm_hw_params_old_user(struct snd_pcm_substream *substream, int err; params = kmalloc(sizeof(*params), GFP_KERNEL); - if (!params) { - err = -ENOMEM; - goto out; - } - oparams = kmalloc(sizeof(*oparams), GFP_KERNEL); - if (!oparams) { - err = -ENOMEM; - goto out; - } - if (copy_from_user(oparams, _oparams, sizeof(*oparams))) { - err = -EFAULT; + if (!params) + return -ENOMEM; + + oparams = memdup_user(_oparams, sizeof(*oparams)); + if (IS_ERR(oparams)) { + err = PTR_ERR(oparams); goto out; } snd_pcm_hw_convert_from_old_params(params, oparams); @@ -3367,9 +3343,10 @@ static int snd_pcm_hw_params_old_user(struct snd_pcm_substream *substream, if (!err) err = -EFAULT; } + + kfree(oparams); out: kfree(params); - kfree(oparams); return err; } #endif /* CONFIG_SND_SUPPORT_OLD_API */ diff --git a/sound/core/seq/seq_compat.c b/sound/core/seq/seq_compat.c index 38693f4..c956fe4 100644 --- a/sound/core/seq/seq_compat.c +++ b/sound/core/seq/seq_compat.c @@ -48,12 +48,11 @@ static int snd_seq_call_port_info_ioctl(struct snd_seq_client *client, unsigned struct snd_seq_port_info *data; mm_segment_t fs; - data = kmalloc(sizeof(*data), GFP_KERNEL); - if (! data) - return -ENOMEM; + data = memdup_user(data32, sizeof(*data32)); + if (IS_ERR(data)) + return PTR_ERR(data); - if (copy_from_user(data, data32, sizeof(*data32)) || - get_user(data->flags, &data32->flags) || + if (get_user(data->flags, &data32->flags) || get_user(data->time_queue, &data32->time_queue)) goto error; data->kernel = NULL; diff --git a/sound/core/timer.c b/sound/core/timer.c index 3f0050d..8f8b17a 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1395,13 +1395,10 @@ static int snd_timer_user_ginfo(struct file *file, struct list_head *p; int err = 0; - ginfo = kmalloc(sizeof(*ginfo), GFP_KERNEL); - if (! ginfo) - return -ENOMEM; - if (copy_from_user(ginfo, _ginfo, sizeof(*ginfo))) { - kfree(ginfo); - return -EFAULT; - } + ginfo = memdup_user(_ginfo, sizeof(*ginfo)); + if (IS_ERR(ginfo)) + return PTR_ERR(ginfo); + tid = ginfo->tid; memset(ginfo, 0, sizeof(*ginfo)); ginfo->tid = tid; -- cgit v0.10.2 From 68425adcc419bfe90776f59e66b8c4cdb6e1b1f3 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 10 Apr 2009 09:43:36 +0800 Subject: ALSA: sound/isa: use memdup_user() Remove open-coded memdup_user(). Signed-off-by: Li Zefan Signed-off-by: Takashi Iwai diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c index 49037d0..bdc8dde 100644 --- a/sound/isa/sb/sb16_csp.c +++ b/sound/isa/sb/sb16_csp.c @@ -684,15 +684,16 @@ static int snd_sb_csp_load(struct snd_sb_csp * p, const unsigned char *buf, int static int snd_sb_csp_load_user(struct snd_sb_csp * p, const unsigned char __user *buf, int size, int load_flags) { - int err = -ENOMEM; - unsigned char *kbuf = kmalloc(size, GFP_KERNEL); - if (kbuf) { - if (copy_from_user(kbuf, buf, size)) - err = -EFAULT; - else - err = snd_sb_csp_load(p, kbuf, size, load_flags); - kfree(kbuf); - } + int err; + unsigned char *kbuf; + + kbuf = memdup_user(buf, size); + if (IS_ERR(kbuf)) + return PTR_ERR(kbuf); + + err = snd_sb_csp_load(p, kbuf, size, load_flags); + + kfree(kbuf); return err; } diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c index dfc449a..5e6870b 100644 --- a/sound/isa/wavefront/wavefront_fx.c +++ b/sound/isa/wavefront/wavefront_fx.c @@ -210,15 +210,11 @@ snd_wavefront_fx_ioctl (struct snd_hwdep *sdev, struct file *file, "> 512 bytes to FX\n"); return -EIO; } - page_data = kmalloc(r.data[2] * sizeof(short), GFP_KERNEL); - if (!page_data) - return -ENOMEM; - if (copy_from_user (page_data, - (unsigned char __user *) r.data[3], - r.data[2] * sizeof(short))) { - kfree(page_data); - return -EFAULT; - } + page_data = memdup_user((unsigned char __user *) + r.data[3], + r.data[2] * sizeof(short)); + if (IS_ERR(page_data)) + return PTR_ERR(page_data); pd = page_data; } diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c index beb312c..5d4ff48 100644 --- a/sound/isa/wavefront/wavefront_synth.c +++ b/sound/isa/wavefront/wavefront_synth.c @@ -1664,12 +1664,11 @@ snd_wavefront_synth_ioctl (struct snd_hwdep *hw, struct file *file, break; case WFCTL_WFCMD: - wc = kmalloc(sizeof(*wc), GFP_KERNEL); - if (! wc) - return -ENOMEM; - if (copy_from_user (wc, argp, sizeof (*wc))) - err = -EFAULT; - else if (wavefront_synth_control (acard, wc) < 0) + wc = memdup_user(argp, sizeof(*wc)); + if (IS_ERR(wc)) + return PTR_ERR(wc); + + if (wavefront_synth_control (acard, wc) < 0) err = -EIO; else if (copy_to_user (argp, wc, sizeof (*wc))) err = -EFAULT; -- cgit v0.10.2 From 85385c1551d509e9e377b7be07ea0e755fb2c3ce Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 10 Apr 2009 09:43:59 +0800 Subject: ALSA: sound/usb: use memdup_user() Remove open-coded memdup_user(). Signed-off-by: Li Zefan Signed-off-by: Takashi Iwai diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index 98276aa..012ff1f 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -349,14 +349,10 @@ static int usb_stream_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, if (cmd != SNDRV_USB_STREAM_IOCTL_SET_PARAMS) return -ENOTTY; - cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); - if (!cfg) - return -ENOMEM; + cfg = memdup_user((void *)arg, sizeof(*cfg)); + if (IS_ERR(cfg)) + return PTR_ERR(cfg); - if (copy_from_user(cfg, (void *)arg, sizeof(*cfg))) { - err = -EFAULT; - goto free; - } if (cfg->version != USB_STREAM_INTERFACE_VERSION) { err = -ENXIO; goto free; diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c index 4af8740..f3d8f71 100644 --- a/sound/usb/usx2y/usX2Yhwdep.c +++ b/sound/usb/usx2y/usX2Yhwdep.c @@ -203,13 +203,12 @@ static int snd_usX2Y_hwdep_dsp_load(struct snd_hwdep *hw, if (access_ok(VERIFY_READ, dsp->image, dsp->length)) { struct usb_device* dev = priv->chip.dev; - char *buf = kmalloc(dsp->length, GFP_KERNEL); - if (!buf) - return -ENOMEM; - if (copy_from_user(buf, dsp->image, dsp->length)) { - kfree(buf); - return -EFAULT; - } + char *buf; + + buf = memdup_user(dsp->image, dsp->length); + if (IS_ERR(buf)) + return PTR_ERR(buf); + err = usb_set_interface(dev, 0, 1); if (err) snd_printk(KERN_ERR "usb_set_interface error \n"); -- cgit v0.10.2 From 336500f0305dc1552e8d01a60b409a7db781ca28 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 10 Apr 2009 09:44:31 +0800 Subject: ALSA: sound/pci: use memdup_user() Remove open-coded memdup_user(). Signed-off-by: Li Zefan Signed-off-by: Takashi Iwai diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index 191e1cd..4b302d8 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -2493,24 +2493,17 @@ static int snd_emu10k1_fx8010_ioctl(struct snd_hwdep * hw, struct file *file, un case SNDRV_EMU10K1_IOCTL_CODE_POKE: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - icode = kmalloc(sizeof(*icode), GFP_KERNEL); - if (icode == NULL) - return -ENOMEM; - if (copy_from_user(icode, argp, sizeof(*icode))) { - kfree(icode); - return -EFAULT; - } + + icode = memdup_user(argp, sizeof(*icode)); + if (IS_ERR(icode)) + return PTR_ERR(icode); res = snd_emu10k1_icode_poke(emu, icode); kfree(icode); return res; case SNDRV_EMU10K1_IOCTL_CODE_PEEK: - icode = kmalloc(sizeof(*icode), GFP_KERNEL); - if (icode == NULL) - return -ENOMEM; - if (copy_from_user(icode, argp, sizeof(*icode))) { - kfree(icode); - return -EFAULT; - } + icode = memdup_user(argp, sizeof(*icode)); + if (IS_ERR(icode)) + return PTR_ERR(icode); res = snd_emu10k1_icode_peek(emu, icode); if (res == 0 && copy_to_user(argp, icode, sizeof(*icode))) { kfree(icode); @@ -2519,24 +2512,16 @@ static int snd_emu10k1_fx8010_ioctl(struct snd_hwdep * hw, struct file *file, un kfree(icode); return res; case SNDRV_EMU10K1_IOCTL_PCM_POKE: - ipcm = kmalloc(sizeof(*ipcm), GFP_KERNEL); - if (ipcm == NULL) - return -ENOMEM; - if (copy_from_user(ipcm, argp, sizeof(*ipcm))) { - kfree(ipcm); - return -EFAULT; - } + ipcm = memdup_user(argp, sizeof(*ipcm)); + if (IS_ERR(ipcm)) + return PTR_ERR(ipcm); res = snd_emu10k1_ipcm_poke(emu, ipcm); kfree(ipcm); return res; case SNDRV_EMU10K1_IOCTL_PCM_PEEK: - ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL); - if (ipcm == NULL) - return -ENOMEM; - if (copy_from_user(ipcm, argp, sizeof(*ipcm))) { - kfree(ipcm); - return -EFAULT; - } + ipcm = memdup_user(argp, sizeof(*ipcm)); + if (IS_ERR(ipcm)) + return PTR_ERR(ipcm); res = snd_emu10k1_ipcm_peek(emu, ipcm); if (res == 0 && copy_to_user(argp, ipcm, sizeof(*ipcm))) { kfree(ipcm); -- cgit v0.10.2 From e431cf45687d1ccb7c7d818defc2af34bd783db2 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 28 Mar 2009 21:19:49 +0100 Subject: ALSA: snd-usb-caiaq: clean up header includes Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/caiaq-audio.c index 08d51e0..cf37331 100644 --- a/sound/usb/caiaq/caiaq-audio.c +++ b/sound/usb/caiaq/caiaq-audio.c @@ -16,17 +16,11 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include -#include -#include -#include #include -#include #include -#include #include -#include -#include #include "caiaq-device.h" #include "caiaq-audio.h" diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/caiaq-control.c index e92c2bb..bb21fcf 100644 --- a/sound/usb/caiaq/caiaq-control.c +++ b/sound/usb/caiaq/caiaq-control.c @@ -18,14 +18,10 @@ */ #include -#include #include +#include #include -#include #include -#include -#include -#include #include "caiaq-device.h" #include "caiaq-control.h" diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c index cf573a9..89f8b68 100644 --- a/sound/usb/caiaq/caiaq-device.c +++ b/sound/usb/caiaq/caiaq-device.c @@ -19,27 +19,20 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include -#include #include #include +#include +#include #include -#include -#include -#include #include +#include #include -#include -#include #include "caiaq-device.h" #include "caiaq-audio.h" #include "caiaq-midi.h" #include "caiaq-control.h" - -#ifdef CONFIG_SND_USB_CAIAQ_INPUT #include "caiaq-input.h" -#endif MODULE_AUTHOR("Daniel Mack "); MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13"); diff --git a/sound/usb/caiaq/caiaq-input.c b/sound/usb/caiaq/caiaq-input.c index f743847..4451775 100644 --- a/sound/usb/caiaq/caiaq-input.c +++ b/sound/usb/caiaq/caiaq-input.c @@ -17,14 +17,8 @@ */ #include -#include -#include -#include #include #include -#include -#include -#include #include #include "caiaq-device.h" #include "caiaq-input.h" diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/caiaq-midi.c index f19fd36..79424c1 100644 --- a/sound/usb/caiaq/caiaq-midi.c +++ b/sound/usb/caiaq/caiaq-midi.c @@ -16,21 +16,14 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include -#include -#include -#include #include -#include -#include -#include #include +#include #include #include "caiaq-device.h" #include "caiaq-midi.h" - static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream) { return 0; -- cgit v0.10.2 From 936e7d03394bc6238091db10d060326622c87ed7 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 1 Apr 2009 19:05:39 +0200 Subject: ALSA: snd-usb-caiaq: rename files to remove redundant information in file pathes Cleanup only, no functional change. Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai diff --git a/sound/usb/caiaq/Makefile b/sound/usb/caiaq/Makefile index 23dadd5..3889996 100644 --- a/sound/usb/caiaq/Makefile +++ b/sound/usb/caiaq/Makefile @@ -1,4 +1,4 @@ -snd-usb-caiaq-y := caiaq-device.o caiaq-audio.o caiaq-midi.o caiaq-control.o -snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += caiaq-input.o +snd-usb-caiaq-y := device.o audio.o midi.o control.o +snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += input.o obj-$(CONFIG_SND_USB_CAIAQ) += snd-usb-caiaq.o diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c new file mode 100644 index 0000000..3f45c0f --- /dev/null +++ b/sound/usb/caiaq/audio.c @@ -0,0 +1,700 @@ +/* + * Copyright (c) 2006-2008 Daniel Mack, Karsten Wiese + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include + +#include "device.h" +#include "audio.h" + +#define N_URBS 32 +#define CLOCK_DRIFT_TOLERANCE 5 +#define FRAMES_PER_URB 8 +#define BYTES_PER_FRAME 512 +#define CHANNELS_PER_STREAM 2 +#define BYTES_PER_SAMPLE 3 +#define BYTES_PER_SAMPLE_USB 4 +#define MAX_BUFFER_SIZE (128*1024) +#define MAX_ENDPOINT_SIZE 512 + +#define ENDPOINT_CAPTURE 2 +#define ENDPOINT_PLAYBACK 6 + +#define MAKE_CHECKBYTE(dev,stream,i) \ + (stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1) + +static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = { + .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER), + .formats = SNDRV_PCM_FMTBIT_S24_3BE, + .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_96000), + .rate_min = 44100, + .rate_max = 0, /* will overwrite later */ + .channels_min = CHANNELS_PER_STREAM, + .channels_max = CHANNELS_PER_STREAM, + .buffer_bytes_max = MAX_BUFFER_SIZE, + .period_bytes_min = 128, + .period_bytes_max = MAX_BUFFER_SIZE, + .periods_min = 1, + .periods_max = 1024, +}; + +static void +activate_substream(struct snd_usb_caiaqdev *dev, + struct snd_pcm_substream *sub) +{ + if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) + dev->sub_playback[sub->number] = sub; + else + dev->sub_capture[sub->number] = sub; +} + +static void +deactivate_substream(struct snd_usb_caiaqdev *dev, + struct snd_pcm_substream *sub) +{ + unsigned long flags; + spin_lock_irqsave(&dev->spinlock, flags); + + if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) + dev->sub_playback[sub->number] = NULL; + else + dev->sub_capture[sub->number] = NULL; + + spin_unlock_irqrestore(&dev->spinlock, flags); +} + +static int +all_substreams_zero(struct snd_pcm_substream **subs) +{ + int i; + for (i = 0; i < MAX_STREAMS; i++) + if (subs[i] != NULL) + return 0; + return 1; +} + +static int stream_start(struct snd_usb_caiaqdev *dev) +{ + int i, ret; + + debug("%s(%p)\n", __func__, dev); + + if (dev->streaming) + return -EINVAL; + + memset(dev->sub_playback, 0, sizeof(dev->sub_playback)); + memset(dev->sub_capture, 0, sizeof(dev->sub_capture)); + dev->input_panic = 0; + dev->output_panic = 0; + dev->first_packet = 1; + dev->streaming = 1; + dev->warned = 0; + + for (i = 0; i < N_URBS; i++) { + ret = usb_submit_urb(dev->data_urbs_in[i], GFP_ATOMIC); + if (ret) { + log("unable to trigger read #%d! (ret %d)\n", i, ret); + dev->streaming = 0; + return -EPIPE; + } + } + + return 0; +} + +static void stream_stop(struct snd_usb_caiaqdev *dev) +{ + int i; + + debug("%s(%p)\n", __func__, dev); + if (!dev->streaming) + return; + + dev->streaming = 0; + + for (i = 0; i < N_URBS; i++) { + usb_kill_urb(dev->data_urbs_in[i]); + usb_kill_urb(dev->data_urbs_out[i]); + } +} + +static int snd_usb_caiaq_substream_open(struct snd_pcm_substream *substream) +{ + struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream); + debug("%s(%p)\n", __func__, substream); + substream->runtime->hw = dev->pcm_info; + snd_pcm_limit_hw_rates(substream->runtime); + return 0; +} + +static int snd_usb_caiaq_substream_close(struct snd_pcm_substream *substream) +{ + struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream); + + debug("%s(%p)\n", __func__, substream); + if (all_substreams_zero(dev->sub_playback) && + all_substreams_zero(dev->sub_capture)) { + /* when the last client has stopped streaming, + * all sample rates are allowed again */ + stream_stop(dev); + dev->pcm_info.rates = dev->samplerates; + } + + return 0; +} + +static int snd_usb_caiaq_pcm_hw_params(struct snd_pcm_substream *sub, + struct snd_pcm_hw_params *hw_params) +{ + debug("%s(%p)\n", __func__, sub); + return snd_pcm_lib_malloc_pages(sub, params_buffer_bytes(hw_params)); +} + +static int snd_usb_caiaq_pcm_hw_free(struct snd_pcm_substream *sub) +{ + struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub); + debug("%s(%p)\n", __func__, sub); + deactivate_substream(dev, sub); + return snd_pcm_lib_free_pages(sub); +} + +/* this should probably go upstream */ +#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12 +#error "Change this table" +#endif + +static unsigned int rates[] = { 5512, 8000, 11025, 16000, 22050, 32000, 44100, + 48000, 64000, 88200, 96000, 176400, 192000 }; + +static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream) +{ + int bytes_per_sample, bpp, ret, i; + int index = substream->number; + struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + + debug("%s(%p)\n", __func__, substream); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1; + else + dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE; + + if (dev->streaming) + return 0; + + /* the first client that opens a stream defines the sample rate + * setting for all subsequent calls, until the last client closed. */ + for (i=0; i < ARRAY_SIZE(rates); i++) + if (runtime->rate == rates[i]) + dev->pcm_info.rates = 1 << i; + + snd_pcm_limit_hw_rates(runtime); + + bytes_per_sample = BYTES_PER_SAMPLE; + if (dev->spec.data_alignment == 2) + bytes_per_sample++; + + bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE) + * bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams; + + if (bpp > MAX_ENDPOINT_SIZE) + bpp = MAX_ENDPOINT_SIZE; + + ret = snd_usb_caiaq_set_audio_params(dev, runtime->rate, + runtime->sample_bits, bpp); + if (ret) + return ret; + + ret = stream_start(dev); + if (ret) + return ret; + + dev->output_running = 0; + wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ); + if (!dev->output_running) { + stream_stop(dev); + return -EPIPE; + } + + return 0; +} + +static int snd_usb_caiaq_pcm_trigger(struct snd_pcm_substream *sub, int cmd) +{ + struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + activate_substream(dev, sub); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + deactivate_substream(dev, sub); + break; + default: + return -EINVAL; + } + + return 0; +} + +static snd_pcm_uframes_t +snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub) +{ + int index = sub->number; + struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub); + + if (dev->input_panic || dev->output_panic) + return SNDRV_PCM_POS_XRUN; + + if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) + return bytes_to_frames(sub->runtime, + dev->audio_out_buf_pos[index]); + else + return bytes_to_frames(sub->runtime, + dev->audio_in_buf_pos[index]); +} + +/* operators for both playback and capture */ +static struct snd_pcm_ops snd_usb_caiaq_ops = { + .open = snd_usb_caiaq_substream_open, + .close = snd_usb_caiaq_substream_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_usb_caiaq_pcm_hw_params, + .hw_free = snd_usb_caiaq_pcm_hw_free, + .prepare = snd_usb_caiaq_pcm_prepare, + .trigger = snd_usb_caiaq_pcm_trigger, + .pointer = snd_usb_caiaq_pcm_pointer +}; + +static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev, + struct snd_pcm_substream **subs) +{ + int stream, pb, *cnt; + struct snd_pcm_substream *sub; + + for (stream = 0; stream < dev->n_streams; stream++) { + sub = subs[stream]; + if (!sub) + continue; + + pb = frames_to_bytes(sub->runtime, + sub->runtime->period_size); + cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + &dev->period_out_count[stream] : + &dev->period_in_count[stream]; + + if (*cnt >= pb) { + snd_pcm_period_elapsed(sub); + *cnt %= pb; + } + } +} + +static void read_in_urb_mode0(struct snd_usb_caiaqdev *dev, + const struct urb *urb, + const struct usb_iso_packet_descriptor *iso) +{ + unsigned char *usb_buf = urb->transfer_buffer + iso->offset; + struct snd_pcm_substream *sub; + int stream, i; + + if (all_substreams_zero(dev->sub_capture)) + return; + + for (i = 0; i < iso->actual_length;) { + for (stream = 0; stream < dev->n_streams; stream++, i++) { + sub = dev->sub_capture[stream]; + if (sub) { + struct snd_pcm_runtime *rt = sub->runtime; + char *audio_buf = rt->dma_area; + int sz = frames_to_bytes(rt, rt->buffer_size); + audio_buf[dev->audio_in_buf_pos[stream]++] + = usb_buf[i]; + dev->period_in_count[stream]++; + if (dev->audio_in_buf_pos[stream] == sz) + dev->audio_in_buf_pos[stream] = 0; + } + } + } +} + +static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev, + const struct urb *urb, + const struct usb_iso_packet_descriptor *iso) +{ + unsigned char *usb_buf = urb->transfer_buffer + iso->offset; + unsigned char check_byte; + struct snd_pcm_substream *sub; + int stream, i; + + for (i = 0; i < iso->actual_length;) { + if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) { + for (stream = 0; + stream < dev->n_streams; + stream++, i++) { + if (dev->first_packet) + continue; + + check_byte = MAKE_CHECKBYTE(dev, stream, i); + + if ((usb_buf[i] & 0x3f) != check_byte) + dev->input_panic = 1; + + if (usb_buf[i] & 0x80) + dev->output_panic = 1; + } + } + dev->first_packet = 0; + + for (stream = 0; stream < dev->n_streams; stream++, i++) { + sub = dev->sub_capture[stream]; + if (dev->input_panic) + usb_buf[i] = 0; + + if (sub) { + struct snd_pcm_runtime *rt = sub->runtime; + char *audio_buf = rt->dma_area; + int sz = frames_to_bytes(rt, rt->buffer_size); + audio_buf[dev->audio_in_buf_pos[stream]++] = + usb_buf[i]; + dev->period_in_count[stream]++; + if (dev->audio_in_buf_pos[stream] == sz) + dev->audio_in_buf_pos[stream] = 0; + } + } + } +} + +static void read_in_urb(struct snd_usb_caiaqdev *dev, + const struct urb *urb, + const struct usb_iso_packet_descriptor *iso) +{ + if (!dev->streaming) + return; + + if (iso->actual_length < dev->bpp) + return; + + switch (dev->spec.data_alignment) { + case 0: + read_in_urb_mode0(dev, urb, iso); + break; + case 2: + read_in_urb_mode2(dev, urb, iso); + break; + } + + if ((dev->input_panic || dev->output_panic) && !dev->warned) { + debug("streaming error detected %s %s\n", + dev->input_panic ? "(input)" : "", + dev->output_panic ? "(output)" : ""); + dev->warned = 1; + } +} + +static void fill_out_urb(struct snd_usb_caiaqdev *dev, + struct urb *urb, + const struct usb_iso_packet_descriptor *iso) +{ + unsigned char *usb_buf = urb->transfer_buffer + iso->offset; + struct snd_pcm_substream *sub; + int stream, i; + + for (i = 0; i < iso->length;) { + for (stream = 0; stream < dev->n_streams; stream++, i++) { + sub = dev->sub_playback[stream]; + if (sub) { + struct snd_pcm_runtime *rt = sub->runtime; + char *audio_buf = rt->dma_area; + int sz = frames_to_bytes(rt, rt->buffer_size); + usb_buf[i] = + audio_buf[dev->audio_out_buf_pos[stream]]; + dev->period_out_count[stream]++; + dev->audio_out_buf_pos[stream]++; + if (dev->audio_out_buf_pos[stream] == sz) + dev->audio_out_buf_pos[stream] = 0; + } else + usb_buf[i] = 0; + } + + /* fill in the check bytes */ + if (dev->spec.data_alignment == 2 && + i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == + (dev->n_streams * CHANNELS_PER_STREAM)) + for (stream = 0; stream < dev->n_streams; stream++, i++) + usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i); + } +} + +static void read_completed(struct urb *urb) +{ + struct snd_usb_caiaq_cb_info *info = urb->context; + struct snd_usb_caiaqdev *dev; + struct urb *out; + int frame, len, send_it = 0, outframe = 0; + + if (urb->status || !info) + return; + + dev = info->dev; + + if (!dev->streaming) + return; + + out = dev->data_urbs_out[info->index]; + + /* read the recently received packet and send back one which has + * the same layout */ + for (frame = 0; frame < FRAMES_PER_URB; frame++) { + if (urb->iso_frame_desc[frame].status) + continue; + + len = urb->iso_frame_desc[outframe].actual_length; + out->iso_frame_desc[outframe].length = len; + out->iso_frame_desc[outframe].actual_length = 0; + out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame; + + if (len > 0) { + spin_lock(&dev->spinlock); + fill_out_urb(dev, out, &out->iso_frame_desc[outframe]); + read_in_urb(dev, urb, &urb->iso_frame_desc[frame]); + spin_unlock(&dev->spinlock); + check_for_elapsed_periods(dev, dev->sub_playback); + check_for_elapsed_periods(dev, dev->sub_capture); + send_it = 1; + } + + outframe++; + } + + if (send_it) { + out->number_of_packets = FRAMES_PER_URB; + out->transfer_flags = URB_ISO_ASAP; + usb_submit_urb(out, GFP_ATOMIC); + } + + /* re-submit inbound urb */ + for (frame = 0; frame < FRAMES_PER_URB; frame++) { + urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame; + urb->iso_frame_desc[frame].length = BYTES_PER_FRAME; + urb->iso_frame_desc[frame].actual_length = 0; + } + + urb->number_of_packets = FRAMES_PER_URB; + urb->transfer_flags = URB_ISO_ASAP; + usb_submit_urb(urb, GFP_ATOMIC); +} + +static void write_completed(struct urb *urb) +{ + struct snd_usb_caiaq_cb_info *info = urb->context; + struct snd_usb_caiaqdev *dev = info->dev; + + if (!dev->output_running) { + dev->output_running = 1; + wake_up(&dev->prepare_wait_queue); + } +} + +static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret) +{ + int i, frame; + struct urb **urbs; + struct usb_device *usb_dev = dev->chip.dev; + unsigned int pipe; + + pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ? + usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) : + usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE); + + urbs = kmalloc(N_URBS * sizeof(*urbs), GFP_KERNEL); + if (!urbs) { + log("unable to kmalloc() urbs, OOM!?\n"); + *ret = -ENOMEM; + return NULL; + } + + for (i = 0; i < N_URBS; i++) { + urbs[i] = usb_alloc_urb(FRAMES_PER_URB, GFP_KERNEL); + if (!urbs[i]) { + log("unable to usb_alloc_urb(), OOM!?\n"); + *ret = -ENOMEM; + return urbs; + } + + urbs[i]->transfer_buffer = + kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL); + if (!urbs[i]->transfer_buffer) { + log("unable to kmalloc() transfer buffer, OOM!?\n"); + *ret = -ENOMEM; + return urbs; + } + + for (frame = 0; frame < FRAMES_PER_URB; frame++) { + struct usb_iso_packet_descriptor *iso = + &urbs[i]->iso_frame_desc[frame]; + + iso->offset = BYTES_PER_FRAME * frame; + iso->length = BYTES_PER_FRAME; + } + + urbs[i]->dev = usb_dev; + urbs[i]->pipe = pipe; + urbs[i]->transfer_buffer_length = FRAMES_PER_URB + * BYTES_PER_FRAME; + urbs[i]->context = &dev->data_cb_info[i]; + urbs[i]->interval = 1; + urbs[i]->transfer_flags = URB_ISO_ASAP; + urbs[i]->number_of_packets = FRAMES_PER_URB; + urbs[i]->complete = (dir == SNDRV_PCM_STREAM_CAPTURE) ? + read_completed : write_completed; + } + + *ret = 0; + return urbs; +} + +static void free_urbs(struct urb **urbs) +{ + int i; + + if (!urbs) + return; + + for (i = 0; i < N_URBS; i++) { + if (!urbs[i]) + continue; + + usb_kill_urb(urbs[i]); + kfree(urbs[i]->transfer_buffer); + usb_free_urb(urbs[i]); + } + + kfree(urbs); +} + +int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) +{ + int i, ret; + + dev->n_audio_in = max(dev->spec.num_analog_audio_in, + dev->spec.num_digital_audio_in) / + CHANNELS_PER_STREAM; + dev->n_audio_out = max(dev->spec.num_analog_audio_out, + dev->spec.num_digital_audio_out) / + CHANNELS_PER_STREAM; + dev->n_streams = max(dev->n_audio_in, dev->n_audio_out); + + debug("dev->n_audio_in = %d\n", dev->n_audio_in); + debug("dev->n_audio_out = %d\n", dev->n_audio_out); + debug("dev->n_streams = %d\n", dev->n_streams); + + if (dev->n_streams > MAX_STREAMS) { + log("unable to initialize device, too many streams.\n"); + return -EINVAL; + } + + ret = snd_pcm_new(dev->chip.card, dev->product_name, 0, + dev->n_audio_out, dev->n_audio_in, &dev->pcm); + + if (ret < 0) { + log("snd_pcm_new() returned %d\n", ret); + return ret; + } + + dev->pcm->private_data = dev; + strcpy(dev->pcm->name, dev->product_name); + + memset(dev->sub_playback, 0, sizeof(dev->sub_playback)); + memset(dev->sub_capture, 0, sizeof(dev->sub_capture)); + + memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware, + sizeof(snd_usb_caiaq_pcm_hardware)); + + /* setup samplerates */ + dev->samplerates = dev->pcm_info.rates; + switch (dev->chip.usb_id) { + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_SESSIONIO): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE): + dev->samplerates |= SNDRV_PCM_RATE_192000; + /* fall thru */ + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): + dev->samplerates |= SNDRV_PCM_RATE_88200; + break; + } + + snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, + &snd_usb_caiaq_ops); + snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, + &snd_usb_caiaq_ops); + + snd_pcm_lib_preallocate_pages_for_all(dev->pcm, + SNDRV_DMA_TYPE_CONTINUOUS, + snd_dma_continuous_data(GFP_KERNEL), + MAX_BUFFER_SIZE, MAX_BUFFER_SIZE); + + dev->data_cb_info = + kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS, + GFP_KERNEL); + + if (!dev->data_cb_info) + return -ENOMEM; + + for (i = 0; i < N_URBS; i++) { + dev->data_cb_info[i].dev = dev; + dev->data_cb_info[i].index = i; + } + + dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret); + if (ret < 0) { + kfree(dev->data_cb_info); + free_urbs(dev->data_urbs_in); + return ret; + } + + dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret); + if (ret < 0) { + kfree(dev->data_cb_info); + free_urbs(dev->data_urbs_in); + free_urbs(dev->data_urbs_out); + return ret; + } + + return 0; +} + +void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev) +{ + debug("%s(%p)\n", __func__, dev); + stream_stop(dev); + free_urbs(dev->data_urbs_in); + free_urbs(dev->data_urbs_out); + kfree(dev->data_cb_info); +} + diff --git a/sound/usb/caiaq/audio.h b/sound/usb/caiaq/audio.h new file mode 100644 index 0000000..8ab1f8d --- /dev/null +++ b/sound/usb/caiaq/audio.h @@ -0,0 +1,7 @@ +#ifndef CAIAQ_AUDIO_H +#define CAIAQ_AUDIO_H + +int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev); +void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev); + +#endif /* CAIAQ_AUDIO_H */ diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/caiaq-audio.c deleted file mode 100644 index cf37331..0000000 --- a/sound/usb/caiaq/caiaq-audio.c +++ /dev/null @@ -1,700 +0,0 @@ -/* - * Copyright (c) 2006-2008 Daniel Mack, Karsten Wiese - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include -#include - -#include "caiaq-device.h" -#include "caiaq-audio.h" - -#define N_URBS 32 -#define CLOCK_DRIFT_TOLERANCE 5 -#define FRAMES_PER_URB 8 -#define BYTES_PER_FRAME 512 -#define CHANNELS_PER_STREAM 2 -#define BYTES_PER_SAMPLE 3 -#define BYTES_PER_SAMPLE_USB 4 -#define MAX_BUFFER_SIZE (128*1024) -#define MAX_ENDPOINT_SIZE 512 - -#define ENDPOINT_CAPTURE 2 -#define ENDPOINT_PLAYBACK 6 - -#define MAKE_CHECKBYTE(dev,stream,i) \ - (stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1) - -static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = { - .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER), - .formats = SNDRV_PCM_FMTBIT_S24_3BE, - .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | - SNDRV_PCM_RATE_96000), - .rate_min = 44100, - .rate_max = 0, /* will overwrite later */ - .channels_min = CHANNELS_PER_STREAM, - .channels_max = CHANNELS_PER_STREAM, - .buffer_bytes_max = MAX_BUFFER_SIZE, - .period_bytes_min = 128, - .period_bytes_max = MAX_BUFFER_SIZE, - .periods_min = 1, - .periods_max = 1024, -}; - -static void -activate_substream(struct snd_usb_caiaqdev *dev, - struct snd_pcm_substream *sub) -{ - if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) - dev->sub_playback[sub->number] = sub; - else - dev->sub_capture[sub->number] = sub; -} - -static void -deactivate_substream(struct snd_usb_caiaqdev *dev, - struct snd_pcm_substream *sub) -{ - unsigned long flags; - spin_lock_irqsave(&dev->spinlock, flags); - - if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) - dev->sub_playback[sub->number] = NULL; - else - dev->sub_capture[sub->number] = NULL; - - spin_unlock_irqrestore(&dev->spinlock, flags); -} - -static int -all_substreams_zero(struct snd_pcm_substream **subs) -{ - int i; - for (i = 0; i < MAX_STREAMS; i++) - if (subs[i] != NULL) - return 0; - return 1; -} - -static int stream_start(struct snd_usb_caiaqdev *dev) -{ - int i, ret; - - debug("%s(%p)\n", __func__, dev); - - if (dev->streaming) - return -EINVAL; - - memset(dev->sub_playback, 0, sizeof(dev->sub_playback)); - memset(dev->sub_capture, 0, sizeof(dev->sub_capture)); - dev->input_panic = 0; - dev->output_panic = 0; - dev->first_packet = 1; - dev->streaming = 1; - dev->warned = 0; - - for (i = 0; i < N_URBS; i++) { - ret = usb_submit_urb(dev->data_urbs_in[i], GFP_ATOMIC); - if (ret) { - log("unable to trigger read #%d! (ret %d)\n", i, ret); - dev->streaming = 0; - return -EPIPE; - } - } - - return 0; -} - -static void stream_stop(struct snd_usb_caiaqdev *dev) -{ - int i; - - debug("%s(%p)\n", __func__, dev); - if (!dev->streaming) - return; - - dev->streaming = 0; - - for (i = 0; i < N_URBS; i++) { - usb_kill_urb(dev->data_urbs_in[i]); - usb_kill_urb(dev->data_urbs_out[i]); - } -} - -static int snd_usb_caiaq_substream_open(struct snd_pcm_substream *substream) -{ - struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream); - debug("%s(%p)\n", __func__, substream); - substream->runtime->hw = dev->pcm_info; - snd_pcm_limit_hw_rates(substream->runtime); - return 0; -} - -static int snd_usb_caiaq_substream_close(struct snd_pcm_substream *substream) -{ - struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream); - - debug("%s(%p)\n", __func__, substream); - if (all_substreams_zero(dev->sub_playback) && - all_substreams_zero(dev->sub_capture)) { - /* when the last client has stopped streaming, - * all sample rates are allowed again */ - stream_stop(dev); - dev->pcm_info.rates = dev->samplerates; - } - - return 0; -} - -static int snd_usb_caiaq_pcm_hw_params(struct snd_pcm_substream *sub, - struct snd_pcm_hw_params *hw_params) -{ - debug("%s(%p)\n", __func__, sub); - return snd_pcm_lib_malloc_pages(sub, params_buffer_bytes(hw_params)); -} - -static int snd_usb_caiaq_pcm_hw_free(struct snd_pcm_substream *sub) -{ - struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub); - debug("%s(%p)\n", __func__, sub); - deactivate_substream(dev, sub); - return snd_pcm_lib_free_pages(sub); -} - -/* this should probably go upstream */ -#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12 -#error "Change this table" -#endif - -static unsigned int rates[] = { 5512, 8000, 11025, 16000, 22050, 32000, 44100, - 48000, 64000, 88200, 96000, 176400, 192000 }; - -static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream) -{ - int bytes_per_sample, bpp, ret, i; - int index = substream->number; - struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - - debug("%s(%p)\n", __func__, substream); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1; - else - dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE; - - if (dev->streaming) - return 0; - - /* the first client that opens a stream defines the sample rate - * setting for all subsequent calls, until the last client closed. */ - for (i=0; i < ARRAY_SIZE(rates); i++) - if (runtime->rate == rates[i]) - dev->pcm_info.rates = 1 << i; - - snd_pcm_limit_hw_rates(runtime); - - bytes_per_sample = BYTES_PER_SAMPLE; - if (dev->spec.data_alignment == 2) - bytes_per_sample++; - - bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE) - * bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams; - - if (bpp > MAX_ENDPOINT_SIZE) - bpp = MAX_ENDPOINT_SIZE; - - ret = snd_usb_caiaq_set_audio_params(dev, runtime->rate, - runtime->sample_bits, bpp); - if (ret) - return ret; - - ret = stream_start(dev); - if (ret) - return ret; - - dev->output_running = 0; - wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ); - if (!dev->output_running) { - stream_stop(dev); - return -EPIPE; - } - - return 0; -} - -static int snd_usb_caiaq_pcm_trigger(struct snd_pcm_substream *sub, int cmd) -{ - struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - activate_substream(dev, sub); - break; - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - deactivate_substream(dev, sub); - break; - default: - return -EINVAL; - } - - return 0; -} - -static snd_pcm_uframes_t -snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub) -{ - int index = sub->number; - struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub); - - if (dev->input_panic || dev->output_panic) - return SNDRV_PCM_POS_XRUN; - - if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) - return bytes_to_frames(sub->runtime, - dev->audio_out_buf_pos[index]); - else - return bytes_to_frames(sub->runtime, - dev->audio_in_buf_pos[index]); -} - -/* operators for both playback and capture */ -static struct snd_pcm_ops snd_usb_caiaq_ops = { - .open = snd_usb_caiaq_substream_open, - .close = snd_usb_caiaq_substream_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = snd_usb_caiaq_pcm_hw_params, - .hw_free = snd_usb_caiaq_pcm_hw_free, - .prepare = snd_usb_caiaq_pcm_prepare, - .trigger = snd_usb_caiaq_pcm_trigger, - .pointer = snd_usb_caiaq_pcm_pointer -}; - -static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev, - struct snd_pcm_substream **subs) -{ - int stream, pb, *cnt; - struct snd_pcm_substream *sub; - - for (stream = 0; stream < dev->n_streams; stream++) { - sub = subs[stream]; - if (!sub) - continue; - - pb = frames_to_bytes(sub->runtime, - sub->runtime->period_size); - cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - &dev->period_out_count[stream] : - &dev->period_in_count[stream]; - - if (*cnt >= pb) { - snd_pcm_period_elapsed(sub); - *cnt %= pb; - } - } -} - -static void read_in_urb_mode0(struct snd_usb_caiaqdev *dev, - const struct urb *urb, - const struct usb_iso_packet_descriptor *iso) -{ - unsigned char *usb_buf = urb->transfer_buffer + iso->offset; - struct snd_pcm_substream *sub; - int stream, i; - - if (all_substreams_zero(dev->sub_capture)) - return; - - for (i = 0; i < iso->actual_length;) { - for (stream = 0; stream < dev->n_streams; stream++, i++) { - sub = dev->sub_capture[stream]; - if (sub) { - struct snd_pcm_runtime *rt = sub->runtime; - char *audio_buf = rt->dma_area; - int sz = frames_to_bytes(rt, rt->buffer_size); - audio_buf[dev->audio_in_buf_pos[stream]++] - = usb_buf[i]; - dev->period_in_count[stream]++; - if (dev->audio_in_buf_pos[stream] == sz) - dev->audio_in_buf_pos[stream] = 0; - } - } - } -} - -static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev, - const struct urb *urb, - const struct usb_iso_packet_descriptor *iso) -{ - unsigned char *usb_buf = urb->transfer_buffer + iso->offset; - unsigned char check_byte; - struct snd_pcm_substream *sub; - int stream, i; - - for (i = 0; i < iso->actual_length;) { - if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) { - for (stream = 0; - stream < dev->n_streams; - stream++, i++) { - if (dev->first_packet) - continue; - - check_byte = MAKE_CHECKBYTE(dev, stream, i); - - if ((usb_buf[i] & 0x3f) != check_byte) - dev->input_panic = 1; - - if (usb_buf[i] & 0x80) - dev->output_panic = 1; - } - } - dev->first_packet = 0; - - for (stream = 0; stream < dev->n_streams; stream++, i++) { - sub = dev->sub_capture[stream]; - if (dev->input_panic) - usb_buf[i] = 0; - - if (sub) { - struct snd_pcm_runtime *rt = sub->runtime; - char *audio_buf = rt->dma_area; - int sz = frames_to_bytes(rt, rt->buffer_size); - audio_buf[dev->audio_in_buf_pos[stream]++] = - usb_buf[i]; - dev->period_in_count[stream]++; - if (dev->audio_in_buf_pos[stream] == sz) - dev->audio_in_buf_pos[stream] = 0; - } - } - } -} - -static void read_in_urb(struct snd_usb_caiaqdev *dev, - const struct urb *urb, - const struct usb_iso_packet_descriptor *iso) -{ - if (!dev->streaming) - return; - - if (iso->actual_length < dev->bpp) - return; - - switch (dev->spec.data_alignment) { - case 0: - read_in_urb_mode0(dev, urb, iso); - break; - case 2: - read_in_urb_mode2(dev, urb, iso); - break; - } - - if ((dev->input_panic || dev->output_panic) && !dev->warned) { - debug("streaming error detected %s %s\n", - dev->input_panic ? "(input)" : "", - dev->output_panic ? "(output)" : ""); - dev->warned = 1; - } -} - -static void fill_out_urb(struct snd_usb_caiaqdev *dev, - struct urb *urb, - const struct usb_iso_packet_descriptor *iso) -{ - unsigned char *usb_buf = urb->transfer_buffer + iso->offset; - struct snd_pcm_substream *sub; - int stream, i; - - for (i = 0; i < iso->length;) { - for (stream = 0; stream < dev->n_streams; stream++, i++) { - sub = dev->sub_playback[stream]; - if (sub) { - struct snd_pcm_runtime *rt = sub->runtime; - char *audio_buf = rt->dma_area; - int sz = frames_to_bytes(rt, rt->buffer_size); - usb_buf[i] = - audio_buf[dev->audio_out_buf_pos[stream]]; - dev->period_out_count[stream]++; - dev->audio_out_buf_pos[stream]++; - if (dev->audio_out_buf_pos[stream] == sz) - dev->audio_out_buf_pos[stream] = 0; - } else - usb_buf[i] = 0; - } - - /* fill in the check bytes */ - if (dev->spec.data_alignment == 2 && - i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == - (dev->n_streams * CHANNELS_PER_STREAM)) - for (stream = 0; stream < dev->n_streams; stream++, i++) - usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i); - } -} - -static void read_completed(struct urb *urb) -{ - struct snd_usb_caiaq_cb_info *info = urb->context; - struct snd_usb_caiaqdev *dev; - struct urb *out; - int frame, len, send_it = 0, outframe = 0; - - if (urb->status || !info) - return; - - dev = info->dev; - - if (!dev->streaming) - return; - - out = dev->data_urbs_out[info->index]; - - /* read the recently received packet and send back one which has - * the same layout */ - for (frame = 0; frame < FRAMES_PER_URB; frame++) { - if (urb->iso_frame_desc[frame].status) - continue; - - len = urb->iso_frame_desc[outframe].actual_length; - out->iso_frame_desc[outframe].length = len; - out->iso_frame_desc[outframe].actual_length = 0; - out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame; - - if (len > 0) { - spin_lock(&dev->spinlock); - fill_out_urb(dev, out, &out->iso_frame_desc[outframe]); - read_in_urb(dev, urb, &urb->iso_frame_desc[frame]); - spin_unlock(&dev->spinlock); - check_for_elapsed_periods(dev, dev->sub_playback); - check_for_elapsed_periods(dev, dev->sub_capture); - send_it = 1; - } - - outframe++; - } - - if (send_it) { - out->number_of_packets = FRAMES_PER_URB; - out->transfer_flags = URB_ISO_ASAP; - usb_submit_urb(out, GFP_ATOMIC); - } - - /* re-submit inbound urb */ - for (frame = 0; frame < FRAMES_PER_URB; frame++) { - urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame; - urb->iso_frame_desc[frame].length = BYTES_PER_FRAME; - urb->iso_frame_desc[frame].actual_length = 0; - } - - urb->number_of_packets = FRAMES_PER_URB; - urb->transfer_flags = URB_ISO_ASAP; - usb_submit_urb(urb, GFP_ATOMIC); -} - -static void write_completed(struct urb *urb) -{ - struct snd_usb_caiaq_cb_info *info = urb->context; - struct snd_usb_caiaqdev *dev = info->dev; - - if (!dev->output_running) { - dev->output_running = 1; - wake_up(&dev->prepare_wait_queue); - } -} - -static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret) -{ - int i, frame; - struct urb **urbs; - struct usb_device *usb_dev = dev->chip.dev; - unsigned int pipe; - - pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ? - usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) : - usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE); - - urbs = kmalloc(N_URBS * sizeof(*urbs), GFP_KERNEL); - if (!urbs) { - log("unable to kmalloc() urbs, OOM!?\n"); - *ret = -ENOMEM; - return NULL; - } - - for (i = 0; i < N_URBS; i++) { - urbs[i] = usb_alloc_urb(FRAMES_PER_URB, GFP_KERNEL); - if (!urbs[i]) { - log("unable to usb_alloc_urb(), OOM!?\n"); - *ret = -ENOMEM; - return urbs; - } - - urbs[i]->transfer_buffer = - kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL); - if (!urbs[i]->transfer_buffer) { - log("unable to kmalloc() transfer buffer, OOM!?\n"); - *ret = -ENOMEM; - return urbs; - } - - for (frame = 0; frame < FRAMES_PER_URB; frame++) { - struct usb_iso_packet_descriptor *iso = - &urbs[i]->iso_frame_desc[frame]; - - iso->offset = BYTES_PER_FRAME * frame; - iso->length = BYTES_PER_FRAME; - } - - urbs[i]->dev = usb_dev; - urbs[i]->pipe = pipe; - urbs[i]->transfer_buffer_length = FRAMES_PER_URB - * BYTES_PER_FRAME; - urbs[i]->context = &dev->data_cb_info[i]; - urbs[i]->interval = 1; - urbs[i]->transfer_flags = URB_ISO_ASAP; - urbs[i]->number_of_packets = FRAMES_PER_URB; - urbs[i]->complete = (dir == SNDRV_PCM_STREAM_CAPTURE) ? - read_completed : write_completed; - } - - *ret = 0; - return urbs; -} - -static void free_urbs(struct urb **urbs) -{ - int i; - - if (!urbs) - return; - - for (i = 0; i < N_URBS; i++) { - if (!urbs[i]) - continue; - - usb_kill_urb(urbs[i]); - kfree(urbs[i]->transfer_buffer); - usb_free_urb(urbs[i]); - } - - kfree(urbs); -} - -int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) -{ - int i, ret; - - dev->n_audio_in = max(dev->spec.num_analog_audio_in, - dev->spec.num_digital_audio_in) / - CHANNELS_PER_STREAM; - dev->n_audio_out = max(dev->spec.num_analog_audio_out, - dev->spec.num_digital_audio_out) / - CHANNELS_PER_STREAM; - dev->n_streams = max(dev->n_audio_in, dev->n_audio_out); - - debug("dev->n_audio_in = %d\n", dev->n_audio_in); - debug("dev->n_audio_out = %d\n", dev->n_audio_out); - debug("dev->n_streams = %d\n", dev->n_streams); - - if (dev->n_streams > MAX_STREAMS) { - log("unable to initialize device, too many streams.\n"); - return -EINVAL; - } - - ret = snd_pcm_new(dev->chip.card, dev->product_name, 0, - dev->n_audio_out, dev->n_audio_in, &dev->pcm); - - if (ret < 0) { - log("snd_pcm_new() returned %d\n", ret); - return ret; - } - - dev->pcm->private_data = dev; - strcpy(dev->pcm->name, dev->product_name); - - memset(dev->sub_playback, 0, sizeof(dev->sub_playback)); - memset(dev->sub_capture, 0, sizeof(dev->sub_capture)); - - memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware, - sizeof(snd_usb_caiaq_pcm_hardware)); - - /* setup samplerates */ - dev->samplerates = dev->pcm_info.rates; - switch (dev->chip.usb_id) { - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_SESSIONIO): - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE): - dev->samplerates |= SNDRV_PCM_RATE_192000; - /* fall thru */ - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): - dev->samplerates |= SNDRV_PCM_RATE_88200; - break; - } - - snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, - &snd_usb_caiaq_ops); - snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, - &snd_usb_caiaq_ops); - - snd_pcm_lib_preallocate_pages_for_all(dev->pcm, - SNDRV_DMA_TYPE_CONTINUOUS, - snd_dma_continuous_data(GFP_KERNEL), - MAX_BUFFER_SIZE, MAX_BUFFER_SIZE); - - dev->data_cb_info = - kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS, - GFP_KERNEL); - - if (!dev->data_cb_info) - return -ENOMEM; - - for (i = 0; i < N_URBS; i++) { - dev->data_cb_info[i].dev = dev; - dev->data_cb_info[i].index = i; - } - - dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret); - if (ret < 0) { - kfree(dev->data_cb_info); - free_urbs(dev->data_urbs_in); - return ret; - } - - dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret); - if (ret < 0) { - kfree(dev->data_cb_info); - free_urbs(dev->data_urbs_in); - free_urbs(dev->data_urbs_out); - return ret; - } - - return 0; -} - -void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev) -{ - debug("%s(%p)\n", __func__, dev); - stream_stop(dev); - free_urbs(dev->data_urbs_in); - free_urbs(dev->data_urbs_out); - kfree(dev->data_cb_info); -} - diff --git a/sound/usb/caiaq/caiaq-audio.h b/sound/usb/caiaq/caiaq-audio.h deleted file mode 100644 index 8ab1f8d..0000000 --- a/sound/usb/caiaq/caiaq-audio.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef CAIAQ_AUDIO_H -#define CAIAQ_AUDIO_H - -int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev); -void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev); - -#endif /* CAIAQ_AUDIO_H */ diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/caiaq-control.c deleted file mode 100644 index bb21fcf..0000000 --- a/sound/usb/caiaq/caiaq-control.c +++ /dev/null @@ -1,332 +0,0 @@ -/* - * Copyright (c) 2007 Daniel Mack - * friendly supported by NI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -#include "caiaq-device.h" -#include "caiaq-control.h" - -#define CNT_INTVAL 0x10000 - -static int control_info(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) -{ - struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol); - struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); - int pos = kcontrol->private_value; - int is_intval = pos & CNT_INTVAL; - unsigned int id = dev->chip.usb_id; - - uinfo->count = 1; - pos &= ~CNT_INTVAL; - - if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ) - && (pos == 0)) { - /* current input mode of A8DJ */ - uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = 2; - return 0; - } - - if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ) - && (pos == 0)) { - /* current input mode of A4DJ */ - uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = 1; - return 0; - } - - if (is_intval) { - uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = 64; - } else { - uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = 1; - } - - return 0; -} - -static int control_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol); - struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); - int pos = kcontrol->private_value; - - if (dev->chip.usb_id == - USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) { - /* A4DJ has only one control */ - /* do not expose hardware input mode 0 */ - ucontrol->value.integer.value[0] = dev->control_state[0] - 1; - return 0; - } - - if (pos & CNT_INTVAL) - ucontrol->value.integer.value[0] - = dev->control_state[pos & ~CNT_INTVAL]; - else - ucontrol->value.integer.value[0] - = !!(dev->control_state[pos / 8] & (1 << pos % 8)); - - return 0; -} - -static int control_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol); - struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); - int pos = kcontrol->private_value; - - if (dev->chip.usb_id == - USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) { - /* A4DJ has only one control */ - /* do not expose hardware input mode 0 */ - dev->control_state[0] = ucontrol->value.integer.value[0] + 1; - snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, - dev->control_state, sizeof(dev->control_state)); - return 1; - } - - if (pos & CNT_INTVAL) { - dev->control_state[pos & ~CNT_INTVAL] - = ucontrol->value.integer.value[0]; - snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, - dev->control_state, sizeof(dev->control_state)); - } else { - if (ucontrol->value.integer.value[0]) - dev->control_state[pos / 8] |= 1 << (pos % 8); - else - dev->control_state[pos / 8] &= ~(1 << (pos % 8)); - - snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, - dev->control_state, sizeof(dev->control_state)); - } - - return 1; -} - -static struct snd_kcontrol_new kcontrol_template __devinitdata = { - .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, - .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, - .index = 0, - .info = control_info, - .get = control_get, - .put = control_put, - /* name and private_value filled later */ -}; - -struct caiaq_controller { - char *name; - int index; -}; - -static struct caiaq_controller ak1_controller[] = { - { "LED left", 2 }, - { "LED middle", 1 }, - { "LED right", 0 }, - { "LED ring", 3 } -}; - -static struct caiaq_controller rk2_controller[] = { - { "LED 1", 5 }, - { "LED 2", 4 }, - { "LED 3", 3 }, - { "LED 4", 2 }, - { "LED 5", 1 }, - { "LED 6", 0 }, - { "LED pedal", 6 }, - { "LED 7seg_1b", 8 }, - { "LED 7seg_1c", 9 }, - { "LED 7seg_2a", 10 }, - { "LED 7seg_2b", 11 }, - { "LED 7seg_2c", 12 }, - { "LED 7seg_2d", 13 }, - { "LED 7seg_2e", 14 }, - { "LED 7seg_2f", 15 }, - { "LED 7seg_2g", 16 }, - { "LED 7seg_3a", 17 }, - { "LED 7seg_3b", 18 }, - { "LED 7seg_3c", 19 }, - { "LED 7seg_3d", 20 }, - { "LED 7seg_3e", 21 }, - { "LED 7seg_3f", 22 }, - { "LED 7seg_3g", 23 } -}; - -static struct caiaq_controller rk3_controller[] = { - { "LED 7seg_1a", 0 + 0 }, - { "LED 7seg_1b", 0 + 1 }, - { "LED 7seg_1c", 0 + 2 }, - { "LED 7seg_1d", 0 + 3 }, - { "LED 7seg_1e", 0 + 4 }, - { "LED 7seg_1f", 0 + 5 }, - { "LED 7seg_1g", 0 + 6 }, - { "LED 7seg_1p", 0 + 7 }, - - { "LED 7seg_2a", 8 + 0 }, - { "LED 7seg_2b", 8 + 1 }, - { "LED 7seg_2c", 8 + 2 }, - { "LED 7seg_2d", 8 + 3 }, - { "LED 7seg_2e", 8 + 4 }, - { "LED 7seg_2f", 8 + 5 }, - { "LED 7seg_2g", 8 + 6 }, - { "LED 7seg_2p", 8 + 7 }, - - { "LED 7seg_3a", 16 + 0 }, - { "LED 7seg_3b", 16 + 1 }, - { "LED 7seg_3c", 16 + 2 }, - { "LED 7seg_3d", 16 + 3 }, - { "LED 7seg_3e", 16 + 4 }, - { "LED 7seg_3f", 16 + 5 }, - { "LED 7seg_3g", 16 + 6 }, - { "LED 7seg_3p", 16 + 7 }, - - { "LED 7seg_4a", 24 + 0 }, - { "LED 7seg_4b", 24 + 1 }, - { "LED 7seg_4c", 24 + 2 }, - { "LED 7seg_4d", 24 + 3 }, - { "LED 7seg_4e", 24 + 4 }, - { "LED 7seg_4f", 24 + 5 }, - { "LED 7seg_4g", 24 + 6 }, - { "LED 7seg_4p", 24 + 7 }, - - { "LED 1", 32 + 0 }, - { "LED 2", 32 + 1 }, - { "LED 3", 32 + 2 }, - { "LED 4", 32 + 3 }, - { "LED 5", 32 + 4 }, - { "LED 6", 32 + 5 }, - { "LED 7", 32 + 6 }, - { "LED 8", 32 + 7 }, - { "LED pedal", 32 + 8 } -}; - -static struct caiaq_controller kore_controller[] = { - { "LED F1", 8 | CNT_INTVAL }, - { "LED F2", 12 | CNT_INTVAL }, - { "LED F3", 0 | CNT_INTVAL }, - { "LED F4", 4 | CNT_INTVAL }, - { "LED F5", 11 | CNT_INTVAL }, - { "LED F6", 15 | CNT_INTVAL }, - { "LED F7", 3 | CNT_INTVAL }, - { "LED F8", 7 | CNT_INTVAL }, - { "LED touch1", 10 | CNT_INTVAL }, - { "LED touch2", 14 | CNT_INTVAL }, - { "LED touch3", 2 | CNT_INTVAL }, - { "LED touch4", 6 | CNT_INTVAL }, - { "LED touch5", 9 | CNT_INTVAL }, - { "LED touch6", 13 | CNT_INTVAL }, - { "LED touch7", 1 | CNT_INTVAL }, - { "LED touch8", 5 | CNT_INTVAL }, - { "LED left", 18 | CNT_INTVAL }, - { "LED right", 22 | CNT_INTVAL }, - { "LED up", 16 | CNT_INTVAL }, - { "LED down", 20 | CNT_INTVAL }, - { "LED stop", 23 | CNT_INTVAL }, - { "LED play", 21 | CNT_INTVAL }, - { "LED record", 19 | CNT_INTVAL }, - { "LED listen", 17 | CNT_INTVAL }, - { "LED lcd", 30 | CNT_INTVAL }, - { "LED menu", 28 | CNT_INTVAL }, - { "LED sound", 31 | CNT_INTVAL }, - { "LED esc", 29 | CNT_INTVAL }, - { "LED view", 27 | CNT_INTVAL }, - { "LED enter", 24 | CNT_INTVAL }, - { "LED control", 26 | CNT_INTVAL } -}; - -static struct caiaq_controller a8dj_controller[] = { - { "Current input mode", 0 | CNT_INTVAL }, - { "GND lift for TC Vinyl mode", 24 + 0 }, - { "GND lift for TC CD/Line mode", 24 + 1 }, - { "GND lift for phono mode", 24 + 2 }, - { "Software lock", 40 } -}; - -static struct caiaq_controller a4dj_controller[] = { - { "Current input mode", 0 | CNT_INTVAL } -}; - -static int __devinit add_controls(struct caiaq_controller *c, int num, - struct snd_usb_caiaqdev *dev) -{ - int i, ret; - struct snd_kcontrol *kc; - - for (i = 0; i < num; i++, c++) { - kcontrol_template.name = c->name; - kcontrol_template.private_value = c->index; - kc = snd_ctl_new1(&kcontrol_template, dev); - ret = snd_ctl_add(dev->chip.card, kc); - if (ret < 0) - return ret; - } - - return 0; -} - -int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev) -{ - int ret = 0; - - switch (dev->chip.usb_id) { - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): - ret = add_controls(ak1_controller, - ARRAY_SIZE(ak1_controller), dev); - break; - - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): - ret = add_controls(rk2_controller, - ARRAY_SIZE(rk2_controller), dev); - break; - - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): - ret = add_controls(rk3_controller, - ARRAY_SIZE(rk3_controller), dev); - break; - - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER): - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2): - ret = add_controls(kore_controller, - ARRAY_SIZE(kore_controller), dev); - break; - - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): - ret = add_controls(a8dj_controller, - ARRAY_SIZE(a8dj_controller), dev); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): - ret = add_controls(a4dj_controller, - ARRAY_SIZE(a4dj_controller), dev); - break; - } - - return ret; -} - diff --git a/sound/usb/caiaq/caiaq-control.h b/sound/usb/caiaq/caiaq-control.h deleted file mode 100644 index 2e7ab1a..0000000 --- a/sound/usb/caiaq/caiaq-control.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef CAIAQ_CONTROL_H -#define CAIAQ_CONTROL_H - -int snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev); - -#endif /* CAIAQ_CONTROL_H */ diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c deleted file mode 100644 index 89f8b68..0000000 --- a/sound/usb/caiaq/caiaq-device.c +++ /dev/null @@ -1,521 +0,0 @@ -/* - * caiaq.c: ALSA driver for caiaq/NativeInstruments devices - * - * Copyright (c) 2007 Daniel Mack - * Karsten Wiese - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "caiaq-device.h" -#include "caiaq-audio.h" -#include "caiaq-midi.h" -#include "caiaq-control.h" -#include "caiaq-input.h" - -MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13"); -MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," - "{Native Instruments, RigKontrol3}," - "{Native Instruments, Kore Controller}," - "{Native Instruments, Kore Controller 2}," - "{Native Instruments, Audio Kontrol 1}," - "{Native Instruments, Audio 4 DJ}," - "{Native Instruments, Audio 8 DJ}," - "{Native Instruments, Session I/O}," - "{Native Instruments, GuitarRig mobile}"); - -static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ -static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */ -static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ -static int snd_card_used[SNDRV_CARDS]; - -module_param_array(index, int, NULL, 0444); -MODULE_PARM_DESC(index, "Index value for the caiaq sound device"); -module_param_array(id, charp, NULL, 0444); -MODULE_PARM_DESC(id, "ID string for the caiaq soundcard."); -module_param_array(enable, bool, NULL, 0444); -MODULE_PARM_DESC(enable, "Enable the caiaq soundcard."); - -enum { - SAMPLERATE_44100 = 0, - SAMPLERATE_48000 = 1, - SAMPLERATE_96000 = 2, - SAMPLERATE_192000 = 3, - SAMPLERATE_88200 = 4, - SAMPLERATE_INVALID = 0xff -}; - -enum { - DEPTH_NONE = 0, - DEPTH_16 = 1, - DEPTH_24 = 2, - DEPTH_32 = 3 -}; - -static struct usb_device_id snd_usb_id_table[] = { - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_RIGKONTROL2 - }, - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_RIGKONTROL3 - }, - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_KORECONTROLLER - }, - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_KORECONTROLLER2 - }, - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_AK1 - }, - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_AUDIO8DJ - }, - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_SESSIONIO - }, - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_GUITARRIGMOBILE - }, - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = USB_VID_NATIVEINSTRUMENTS, - .idProduct = USB_PID_AUDIO4DJ - }, - { /* terminator */ } -}; - -static void usb_ep1_command_reply_dispatch (struct urb* urb) -{ - int ret; - struct snd_usb_caiaqdev *dev = urb->context; - unsigned char *buf = urb->transfer_buffer; - - if (urb->status || !dev) { - log("received EP1 urb->status = %i\n", urb->status); - return; - } - - switch(buf[0]) { - case EP1_CMD_GET_DEVICE_INFO: - memcpy(&dev->spec, buf+1, sizeof(struct caiaq_device_spec)); - dev->spec.fw_version = le16_to_cpu(dev->spec.fw_version); - debug("device spec (firmware %d): audio: %d in, %d out, " - "MIDI: %d in, %d out, data alignment %d\n", - dev->spec.fw_version, - dev->spec.num_analog_audio_in, - dev->spec.num_analog_audio_out, - dev->spec.num_midi_in, - dev->spec.num_midi_out, - dev->spec.data_alignment); - - dev->spec_received++; - wake_up(&dev->ep1_wait_queue); - break; - case EP1_CMD_AUDIO_PARAMS: - dev->audio_parm_answer = buf[1]; - wake_up(&dev->ep1_wait_queue); - break; - case EP1_CMD_MIDI_READ: - snd_usb_caiaq_midi_handle_input(dev, buf[1], buf + 3, buf[2]); - break; - case EP1_CMD_READ_IO: - if (dev->chip.usb_id == - USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) { - if (urb->actual_length > sizeof(dev->control_state)) - urb->actual_length = sizeof(dev->control_state); - memcpy(dev->control_state, buf + 1, urb->actual_length); - wake_up(&dev->ep1_wait_queue); - break; - } -#ifdef CONFIG_SND_USB_CAIAQ_INPUT - case EP1_CMD_READ_ERP: - case EP1_CMD_READ_ANALOG: - snd_usb_caiaq_input_dispatch(dev, buf, urb->actual_length); -#endif - break; - } - - dev->ep1_in_urb.actual_length = 0; - ret = usb_submit_urb(&dev->ep1_in_urb, GFP_ATOMIC); - if (ret < 0) - log("unable to submit urb. OOM!?\n"); -} - -int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev, - unsigned char command, - const unsigned char *buffer, - int len) -{ - int actual_len; - struct usb_device *usb_dev = dev->chip.dev; - - if (!usb_dev) - return -EIO; - - if (len > EP1_BUFSIZE - 1) - len = EP1_BUFSIZE - 1; - - if (buffer && len > 0) - memcpy(dev->ep1_out_buf+1, buffer, len); - - dev->ep1_out_buf[0] = command; - return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1), - dev->ep1_out_buf, len+1, &actual_len, 200); -} - -int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, - int rate, int depth, int bpp) -{ - int ret; - char tmp[5]; - - switch (rate) { - case 44100: tmp[0] = SAMPLERATE_44100; break; - case 48000: tmp[0] = SAMPLERATE_48000; break; - case 88200: tmp[0] = SAMPLERATE_88200; break; - case 96000: tmp[0] = SAMPLERATE_96000; break; - case 192000: tmp[0] = SAMPLERATE_192000; break; - default: return -EINVAL; - } - - switch (depth) { - case 16: tmp[1] = DEPTH_16; break; - case 24: tmp[1] = DEPTH_24; break; - default: return -EINVAL; - } - - tmp[2] = bpp & 0xff; - tmp[3] = bpp >> 8; - tmp[4] = 1; /* packets per microframe */ - - debug("setting audio params: %d Hz, %d bits, %d bpp\n", - rate, depth, bpp); - - dev->audio_parm_answer = -1; - ret = snd_usb_caiaq_send_command(dev, EP1_CMD_AUDIO_PARAMS, - tmp, sizeof(tmp)); - - if (ret) - return ret; - - if (!wait_event_timeout(dev->ep1_wait_queue, - dev->audio_parm_answer >= 0, HZ)) - return -EPIPE; - - if (dev->audio_parm_answer != 1) - debug("unable to set the device's audio params\n"); - else - dev->bpp = bpp; - - return dev->audio_parm_answer == 1 ? 0 : -EINVAL; -} - -int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, - int digital, int analog, int erp) -{ - char tmp[3] = { digital, analog, erp }; - return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG, - tmp, sizeof(tmp)); -} - -static void __devinit setup_card(struct snd_usb_caiaqdev *dev) -{ - int ret; - char val[4]; - - /* device-specific startup specials */ - switch (dev->chip.usb_id) { - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): - /* RigKontrol2 - display centered dash ('-') */ - val[0] = 0x00; - val[1] = 0x00; - val[2] = 0x01; - snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 3); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): - /* RigKontrol2 - display two centered dashes ('--') */ - val[0] = 0x00; - val[1] = 0x40; - val[2] = 0x40; - val[3] = 0x00; - snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 4); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): - /* Audio Kontrol 1 - make USB-LED stop blinking */ - val[0] = 0x00; - snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 1); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): - /* Audio 8 DJ - trigger read of current settings */ - dev->control_state[0] = 0xff; - snd_usb_caiaq_set_auto_msg(dev, 1, 0, 0); - snd_usb_caiaq_send_command(dev, EP1_CMD_READ_IO, NULL, 0); - - if (!wait_event_timeout(dev->ep1_wait_queue, - dev->control_state[0] != 0xff, HZ)) - return; - - /* fix up some defaults */ - if ((dev->control_state[1] != 2) || - (dev->control_state[2] != 3) || - (dev->control_state[4] != 2)) { - dev->control_state[1] = 2; - dev->control_state[2] = 3; - dev->control_state[4] = 2; - snd_usb_caiaq_send_command(dev, - EP1_CMD_WRITE_IO, dev->control_state, 6); - } - - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): - /* Audio 4 DJ - default input mode to phono */ - dev->control_state[0] = 2; - snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, - dev->control_state, 1); - break; - } - - if (dev->spec.num_analog_audio_out + - dev->spec.num_analog_audio_in + - dev->spec.num_digital_audio_out + - dev->spec.num_digital_audio_in > 0) { - ret = snd_usb_caiaq_audio_init(dev); - if (ret < 0) - log("Unable to set up audio system (ret=%d)\n", ret); - } - - if (dev->spec.num_midi_in + - dev->spec.num_midi_out > 0) { - ret = snd_usb_caiaq_midi_init(dev); - if (ret < 0) - log("Unable to set up MIDI system (ret=%d)\n", ret); - } - -#ifdef CONFIG_SND_USB_CAIAQ_INPUT - ret = snd_usb_caiaq_input_init(dev); - if (ret < 0) - log("Unable to set up input system (ret=%d)\n", ret); -#endif - - /* finally, register the card and all its sub-instances */ - ret = snd_card_register(dev->chip.card); - if (ret < 0) { - log("snd_card_register() returned %d\n", ret); - snd_card_free(dev->chip.card); - } - - ret = snd_usb_caiaq_control_init(dev); - if (ret < 0) - log("Unable to set up control system (ret=%d)\n", ret); -} - -static int create_card(struct usb_device* usb_dev, struct snd_card **cardp) -{ - int devnum; - int err; - struct snd_card *card; - struct snd_usb_caiaqdev *dev; - - for (devnum = 0; devnum < SNDRV_CARDS; devnum++) - if (enable[devnum] && !snd_card_used[devnum]) - break; - - if (devnum >= SNDRV_CARDS) - return -ENODEV; - - err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, - sizeof(struct snd_usb_caiaqdev), &card); - if (err < 0) - return err; - - dev = caiaqdev(card); - dev->chip.dev = usb_dev; - dev->chip.card = card; - dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct)); - spin_lock_init(&dev->spinlock); - snd_card_set_dev(card, &usb_dev->dev); - - *cardp = card; - return 0; -} - -static int __devinit init_card(struct snd_usb_caiaqdev *dev) -{ - char *c; - struct usb_device *usb_dev = dev->chip.dev; - struct snd_card *card = dev->chip.card; - int err, len; - - if (usb_set_interface(usb_dev, 0, 1) != 0) { - log("can't set alt interface.\n"); - return -EIO; - } - - usb_init_urb(&dev->ep1_in_urb); - usb_init_urb(&dev->midi_out_urb); - - usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev, - usb_rcvbulkpipe(usb_dev, 0x1), - dev->ep1_in_buf, EP1_BUFSIZE, - usb_ep1_command_reply_dispatch, dev); - - usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev, - usb_sndbulkpipe(usb_dev, 0x1), - dev->midi_out_buf, EP1_BUFSIZE, - snd_usb_caiaq_midi_output_done, dev); - - init_waitqueue_head(&dev->ep1_wait_queue); - init_waitqueue_head(&dev->prepare_wait_queue); - - if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0) - return -EIO; - - err = snd_usb_caiaq_send_command(dev, EP1_CMD_GET_DEVICE_INFO, NULL, 0); - if (err) - return err; - - if (!wait_event_timeout(dev->ep1_wait_queue, dev->spec_received, HZ)) - return -ENODEV; - - usb_string(usb_dev, usb_dev->descriptor.iManufacturer, - dev->vendor_name, CAIAQ_USB_STR_LEN); - - usb_string(usb_dev, usb_dev->descriptor.iProduct, - dev->product_name, CAIAQ_USB_STR_LEN); - - usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, - dev->serial, CAIAQ_USB_STR_LEN); - - /* terminate serial string at first white space occurence */ - c = strchr(dev->serial, ' '); - if (c) - *c = '\0'; - - strcpy(card->driver, MODNAME); - strcpy(card->shortname, dev->product_name); - - len = snprintf(card->longname, sizeof(card->longname), - "%s %s (serial %s, ", - dev->vendor_name, dev->product_name, dev->serial); - - if (len < sizeof(card->longname) - 2) - len += usb_make_path(usb_dev, card->longname + len, - sizeof(card->longname) - len); - - card->longname[len++] = ')'; - card->longname[len] = '\0'; - setup_card(dev); - return 0; -} - -static int __devinit snd_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int ret; - struct snd_card *card; - struct usb_device *device = interface_to_usbdev(intf); - - ret = create_card(device, &card); - - if (ret < 0) - return ret; - - usb_set_intfdata(intf, card); - ret = init_card(caiaqdev(card)); - if (ret < 0) { - log("unable to init card! (ret=%d)\n", ret); - snd_card_free(card); - return ret; - } - - return 0; -} - -static void snd_disconnect(struct usb_interface *intf) -{ - struct snd_usb_caiaqdev *dev; - struct snd_card *card = usb_get_intfdata(intf); - - debug("%s(%p)\n", __func__, intf); - - if (!card) - return; - - dev = caiaqdev(card); - snd_card_disconnect(card); - -#ifdef CONFIG_SND_USB_CAIAQ_INPUT - snd_usb_caiaq_input_free(dev); -#endif - snd_usb_caiaq_audio_free(dev); - - usb_kill_urb(&dev->ep1_in_urb); - usb_kill_urb(&dev->midi_out_urb); - - snd_card_free(card); - usb_reset_device(interface_to_usbdev(intf)); -} - - -MODULE_DEVICE_TABLE(usb, snd_usb_id_table); -static struct usb_driver snd_usb_driver = { - .name = MODNAME, - .probe = snd_probe, - .disconnect = snd_disconnect, - .id_table = snd_usb_id_table, -}; - -static int __init snd_module_init(void) -{ - return usb_register(&snd_usb_driver); -} - -static void __exit snd_module_exit(void) -{ - usb_deregister(&snd_usb_driver); -} - -module_init(snd_module_init) -module_exit(snd_module_exit) - diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/caiaq-device.h deleted file mode 100644 index 4cce1ad..0000000 --- a/sound/usb/caiaq/caiaq-device.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef CAIAQ_DEVICE_H -#define CAIAQ_DEVICE_H - -#include "../usbaudio.h" - -#define USB_VID_NATIVEINSTRUMENTS 0x17cc - -#define USB_PID_RIGKONTROL2 0x1969 -#define USB_PID_RIGKONTROL3 0x1940 -#define USB_PID_KORECONTROLLER 0x4711 -#define USB_PID_KORECONTROLLER2 0x4712 -#define USB_PID_AK1 0x0815 -#define USB_PID_AUDIO4DJ 0x0839 -#define USB_PID_AUDIO8DJ 0x1978 -#define USB_PID_SESSIONIO 0x1915 -#define USB_PID_GUITARRIGMOBILE 0x0d8d - -#define EP1_BUFSIZE 64 -#define CAIAQ_USB_STR_LEN 0xff -#define MAX_STREAMS 32 - -//#define SND_USB_CAIAQ_DEBUG - -#define MODNAME "snd-usb-caiaq" -#define log(x...) snd_printk(KERN_WARNING MODNAME" log: " x) - -#ifdef SND_USB_CAIAQ_DEBUG -#define debug(x...) snd_printk(KERN_WARNING MODNAME " debug: " x) -#else -#define debug(x...) do { } while(0) -#endif - -#define EP1_CMD_GET_DEVICE_INFO 0x1 -#define EP1_CMD_READ_ERP 0x2 -#define EP1_CMD_READ_ANALOG 0x3 -#define EP1_CMD_READ_IO 0x4 -#define EP1_CMD_WRITE_IO 0x5 -#define EP1_CMD_MIDI_READ 0x6 -#define EP1_CMD_MIDI_WRITE 0x7 -#define EP1_CMD_AUDIO_PARAMS 0x9 -#define EP1_CMD_AUTO_MSG 0xb -#define EP1_CMD_DIMM_LEDS 0xc - -struct caiaq_device_spec { - unsigned short fw_version; - unsigned char hw_subtype; - unsigned char num_erp; - unsigned char num_analog_in; - unsigned char num_digital_in; - unsigned char num_digital_out; - unsigned char num_analog_audio_out; - unsigned char num_analog_audio_in; - unsigned char num_digital_audio_out; - unsigned char num_digital_audio_in; - unsigned char num_midi_out; - unsigned char num_midi_in; - unsigned char data_alignment; -} __attribute__ ((packed)); - -struct snd_usb_caiaq_cb_info; - -struct snd_usb_caiaqdev { - struct snd_usb_audio chip; - - struct urb ep1_in_urb; - struct urb midi_out_urb; - struct urb **data_urbs_in; - struct urb **data_urbs_out; - struct snd_usb_caiaq_cb_info *data_cb_info; - - unsigned char ep1_in_buf[EP1_BUFSIZE]; - unsigned char ep1_out_buf[EP1_BUFSIZE]; - unsigned char midi_out_buf[EP1_BUFSIZE]; - - struct caiaq_device_spec spec; - spinlock_t spinlock; - wait_queue_head_t ep1_wait_queue; - wait_queue_head_t prepare_wait_queue; - int spec_received, audio_parm_answer; - int midi_out_active; - - char vendor_name[CAIAQ_USB_STR_LEN]; - char product_name[CAIAQ_USB_STR_LEN]; - char serial[CAIAQ_USB_STR_LEN]; - - int n_streams, n_audio_in, n_audio_out; - int streaming, first_packet, output_running; - int audio_in_buf_pos[MAX_STREAMS]; - int audio_out_buf_pos[MAX_STREAMS]; - int period_in_count[MAX_STREAMS]; - int period_out_count[MAX_STREAMS]; - int input_panic, output_panic, warned; - char *audio_in_buf, *audio_out_buf; - unsigned int samplerates, bpp; - - struct snd_pcm_substream *sub_playback[MAX_STREAMS]; - struct snd_pcm_substream *sub_capture[MAX_STREAMS]; - - /* Controls */ - unsigned char control_state[64]; - - /* Linux input */ -#ifdef CONFIG_SND_USB_CAIAQ_INPUT - struct input_dev *input_dev; - char phys[64]; /* physical device path */ - unsigned short keycode[64]; -#endif - - /* ALSA */ - struct snd_pcm *pcm; - struct snd_pcm_hardware pcm_info; - struct snd_rawmidi *rmidi; - struct snd_rawmidi_substream *midi_receive_substream; - struct snd_rawmidi_substream *midi_out_substream; -}; - -struct snd_usb_caiaq_cb_info { - struct snd_usb_caiaqdev *dev; - int index; -}; - -#define caiaqdev(c) ((struct snd_usb_caiaqdev*)(c)->private_data) - -int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, int rate, int depth, int bbp); -int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, int digital, int analog, int erp); -int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev, - unsigned char command, - const unsigned char *buffer, - int len); - -#endif /* CAIAQ_DEVICE_H */ diff --git a/sound/usb/caiaq/caiaq-input.c b/sound/usb/caiaq/caiaq-input.c deleted file mode 100644 index 4451775..0000000 --- a/sound/usb/caiaq/caiaq-input.c +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Copyright (c) 2006,2007 Daniel Mack, Tim Ruetz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include -#include "caiaq-device.h" -#include "caiaq-input.h" - -static unsigned short keycode_ak1[] = { KEY_C, KEY_B, KEY_A }; -static unsigned short keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4, - KEY_5, KEY_6, KEY_7 }; -static unsigned short keycode_rk3[] = { KEY_1, KEY_2, KEY_3, KEY_4, - KEY_5, KEY_6, KEY_7, KEY_5, KEY_6 }; - -static unsigned short keycode_kore[] = { - KEY_FN_F1, /* "menu" */ - KEY_FN_F7, /* "lcd backlight */ - KEY_FN_F2, /* "control" */ - KEY_FN_F3, /* "enter" */ - KEY_FN_F4, /* "view" */ - KEY_FN_F5, /* "esc" */ - KEY_FN_F6, /* "sound" */ - KEY_FN_F8, /* array spacer, never triggered. */ - KEY_RIGHT, - KEY_DOWN, - KEY_UP, - KEY_LEFT, - KEY_SOUND, /* "listen" */ - KEY_RECORD, - KEY_PLAYPAUSE, - KEY_STOP, - BTN_4, /* 8 softkeys */ - BTN_3, - BTN_2, - BTN_1, - BTN_8, - BTN_7, - BTN_6, - BTN_5, - KEY_BRL_DOT4, /* touch sensitive knobs */ - KEY_BRL_DOT3, - KEY_BRL_DOT2, - KEY_BRL_DOT1, - KEY_BRL_DOT8, - KEY_BRL_DOT7, - KEY_BRL_DOT6, - KEY_BRL_DOT5 -}; - -#define DEG90 (range / 2) -#define DEG180 (range) -#define DEG270 (DEG90 + DEG180) -#define DEG360 (DEG180 * 2) -#define HIGH_PEAK (268) -#define LOW_PEAK (-7) - -/* some of these devices have endless rotation potentiometers - * built in which use two tapers, 90 degrees phase shifted. - * this algorithm decodes them to one single value, ranging - * from 0 to 999 */ -static unsigned int decode_erp(unsigned char a, unsigned char b) -{ - int weight_a, weight_b; - int pos_a, pos_b; - int ret; - int range = HIGH_PEAK - LOW_PEAK; - int mid_value = (HIGH_PEAK + LOW_PEAK) / 2; - - weight_b = abs(mid_value - a) - (range / 2 - 100) / 2; - - if (weight_b < 0) - weight_b = 0; - - if (weight_b > 100) - weight_b = 100; - - weight_a = 100 - weight_b; - - if (a < mid_value) { - /* 0..90 and 270..360 degrees */ - pos_b = b - LOW_PEAK + DEG270; - if (pos_b >= DEG360) - pos_b -= DEG360; - } else - /* 90..270 degrees */ - pos_b = HIGH_PEAK - b + DEG90; - - - if (b > mid_value) - /* 0..180 degrees */ - pos_a = a - LOW_PEAK; - else - /* 180..360 degrees */ - pos_a = HIGH_PEAK - a + DEG180; - - /* interpolate both slider values, depending on weight factors */ - /* 0..99 x DEG360 */ - ret = pos_a * weight_a + pos_b * weight_b; - - /* normalize to 0..999 */ - ret *= 10; - ret /= DEG360; - - if (ret < 0) - ret += 1000; - - if (ret >= 1000) - ret -= 1000; - - return ret; -} - -#undef DEG90 -#undef DEG180 -#undef DEG270 -#undef DEG360 -#undef HIGH_PEAK -#undef LOW_PEAK - - -static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *dev, - const unsigned char *buf, - unsigned int len) -{ - struct input_dev *input_dev = dev->input_dev; - - switch (dev->chip.usb_id) { - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): - input_report_abs(input_dev, ABS_X, (buf[4] << 8) | buf[5]); - input_report_abs(input_dev, ABS_Y, (buf[0] << 8) | buf[1]); - input_report_abs(input_dev, ABS_Z, (buf[2] << 8) | buf[3]); - input_sync(input_dev); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): - input_report_abs(input_dev, ABS_X, (buf[0] << 8) | buf[1]); - input_report_abs(input_dev, ABS_Y, (buf[2] << 8) | buf[3]); - input_report_abs(input_dev, ABS_Z, (buf[4] << 8) | buf[5]); - input_sync(input_dev); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER): - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2): - input_report_abs(input_dev, ABS_X, (buf[0] << 8) | buf[1]); - input_report_abs(input_dev, ABS_Y, (buf[2] << 8) | buf[3]); - input_report_abs(input_dev, ABS_Z, (buf[4] << 8) | buf[5]); - input_sync(input_dev); - break; - } -} - -static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev, - const char *buf, unsigned int len) -{ - struct input_dev *input_dev = dev->input_dev; - int i; - - switch (dev->chip.usb_id) { - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): - i = decode_erp(buf[0], buf[1]); - input_report_abs(input_dev, ABS_X, i); - input_sync(input_dev); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER): - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2): - i = decode_erp(buf[7], buf[5]); - input_report_abs(input_dev, ABS_HAT0X, i); - i = decode_erp(buf[12], buf[14]); - input_report_abs(input_dev, ABS_HAT0Y, i); - i = decode_erp(buf[15], buf[13]); - input_report_abs(input_dev, ABS_HAT1X, i); - i = decode_erp(buf[0], buf[2]); - input_report_abs(input_dev, ABS_HAT1Y, i); - i = decode_erp(buf[3], buf[1]); - input_report_abs(input_dev, ABS_HAT2X, i); - i = decode_erp(buf[8], buf[10]); - input_report_abs(input_dev, ABS_HAT2Y, i); - i = decode_erp(buf[11], buf[9]); - input_report_abs(input_dev, ABS_HAT3X, i); - i = decode_erp(buf[4], buf[6]); - input_report_abs(input_dev, ABS_HAT3Y, i); - input_sync(input_dev); - break; - } -} - -static void snd_caiaq_input_read_io(struct snd_usb_caiaqdev *dev, - char *buf, unsigned int len) -{ - struct input_dev *input_dev = dev->input_dev; - unsigned short *keycode = input_dev->keycode; - int i; - - if (!keycode) - return; - - if (input_dev->id.product == USB_PID_RIGKONTROL2) - for (i = 0; i < len; i++) - buf[i] = ~buf[i]; - - for (i = 0; i < input_dev->keycodemax && i < len * 8; i++) - input_report_key(input_dev, keycode[i], - buf[i / 8] & (1 << (i % 8))); - - if (dev->chip.usb_id == - USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER) || - dev->chip.usb_id == - USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2)) - input_report_abs(dev->input_dev, ABS_MISC, 255 - buf[4]); - - input_sync(input_dev); -} - -void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, - char *buf, - unsigned int len) -{ - if (!dev->input_dev || len < 1) - return; - - switch (buf[0]) { - case EP1_CMD_READ_ANALOG: - snd_caiaq_input_read_analog(dev, buf + 1, len - 1); - break; - case EP1_CMD_READ_ERP: - snd_caiaq_input_read_erp(dev, buf + 1, len - 1); - break; - case EP1_CMD_READ_IO: - snd_caiaq_input_read_io(dev, buf + 1, len - 1); - break; - } -} - -int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev) -{ - struct usb_device *usb_dev = dev->chip.dev; - struct input_dev *input; - int i, ret; - - input = input_allocate_device(); - if (!input) - return -ENOMEM; - - usb_make_path(usb_dev, dev->phys, sizeof(dev->phys)); - strlcat(dev->phys, "/input0", sizeof(dev->phys)); - - input->name = dev->product_name; - input->phys = dev->phys; - usb_to_input_id(usb_dev, &input->id); - input->dev.parent = &usb_dev->dev; - - switch (dev->chip.usb_id) { - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): - input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | - BIT_MASK(ABS_Z); - BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_rk2)); - memcpy(dev->keycode, keycode_rk2, sizeof(keycode_rk2)); - input->keycodemax = ARRAY_SIZE(keycode_rk2); - input_set_abs_params(input, ABS_X, 0, 4096, 0, 10); - input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10); - input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10); - snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): - input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | - BIT_MASK(ABS_Z); - BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_rk3)); - memcpy(dev->keycode, keycode_rk3, sizeof(keycode_rk3)); - input->keycodemax = ARRAY_SIZE(keycode_rk3); - input_set_abs_params(input, ABS_X, 0, 1024, 0, 10); - input_set_abs_params(input, ABS_Y, 0, 1024, 0, 10); - input_set_abs_params(input, ABS_Z, 0, 1024, 0, 10); - snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): - input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input->absbit[0] = BIT_MASK(ABS_X); - BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_ak1)); - memcpy(dev->keycode, keycode_ak1, sizeof(keycode_ak1)); - input->keycodemax = ARRAY_SIZE(keycode_ak1); - input_set_abs_params(input, ABS_X, 0, 999, 0, 10); - snd_usb_caiaq_set_auto_msg(dev, 1, 0, 5); - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER): - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2): - input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input->absbit[0] = BIT_MASK(ABS_HAT0X) | BIT_MASK(ABS_HAT0Y) | - BIT_MASK(ABS_HAT1X) | BIT_MASK(ABS_HAT1Y) | - BIT_MASK(ABS_HAT2X) | BIT_MASK(ABS_HAT2Y) | - BIT_MASK(ABS_HAT3X) | BIT_MASK(ABS_HAT3Y) | - BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | - BIT_MASK(ABS_Z); - input->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC); - BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_kore)); - memcpy(dev->keycode, keycode_kore, sizeof(keycode_kore)); - input->keycodemax = ARRAY_SIZE(keycode_kore); - input_set_abs_params(input, ABS_HAT0X, 0, 999, 0, 10); - input_set_abs_params(input, ABS_HAT0Y, 0, 999, 0, 10); - input_set_abs_params(input, ABS_HAT1X, 0, 999, 0, 10); - input_set_abs_params(input, ABS_HAT1Y, 0, 999, 0, 10); - input_set_abs_params(input, ABS_HAT2X, 0, 999, 0, 10); - input_set_abs_params(input, ABS_HAT2Y, 0, 999, 0, 10); - input_set_abs_params(input, ABS_HAT3X, 0, 999, 0, 10); - input_set_abs_params(input, ABS_HAT3Y, 0, 999, 0, 10); - input_set_abs_params(input, ABS_X, 0, 4096, 0, 10); - input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10); - input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10); - input_set_abs_params(input, ABS_MISC, 0, 255, 0, 1); - snd_usb_caiaq_set_auto_msg(dev, 1, 10, 5); - break; - default: - /* no input methods supported on this device */ - input_free_device(input); - return 0; - } - - input->keycode = dev->keycode; - input->keycodesize = sizeof(unsigned short); - for (i = 0; i < input->keycodemax; i++) - __set_bit(dev->keycode[i], input->keybit); - - ret = input_register_device(input); - if (ret < 0) { - input_free_device(input); - return ret; - } - - dev->input_dev = input; - return 0; -} - -void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev) -{ - if (!dev || !dev->input_dev) - return; - - input_unregister_device(dev->input_dev); - dev->input_dev = NULL; -} - diff --git a/sound/usb/caiaq/caiaq-input.h b/sound/usb/caiaq/caiaq-input.h deleted file mode 100644 index ced5355..0000000 --- a/sound/usb/caiaq/caiaq-input.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CAIAQ_INPUT_H -#define CAIAQ_INPUT_H - -void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, char *buf, unsigned int len); -int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev); -void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev); - -#endif diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/caiaq-midi.c deleted file mode 100644 index 79424c1..0000000 --- a/sound/usb/caiaq/caiaq-midi.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (c) 2006,2007 Daniel Mack - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include - -#include "caiaq-device.h" -#include "caiaq-midi.h" - -static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream) -{ - return 0; -} - -static int snd_usb_caiaq_midi_input_close(struct snd_rawmidi_substream *substream) -{ - return 0; -} - -static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *substream, int up) -{ - struct snd_usb_caiaqdev *dev = substream->rmidi->private_data; - - if (!dev) - return; - - dev->midi_receive_substream = up ? substream : NULL; -} - - -static int snd_usb_caiaq_midi_output_open(struct snd_rawmidi_substream *substream) -{ - return 0; -} - -static int snd_usb_caiaq_midi_output_close(struct snd_rawmidi_substream *substream) -{ - struct snd_usb_caiaqdev *dev = substream->rmidi->private_data; - if (dev->midi_out_active) { - usb_kill_urb(&dev->midi_out_urb); - dev->midi_out_active = 0; - } - return 0; -} - -static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev, - struct snd_rawmidi_substream *substream) -{ - int len, ret; - - dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE; - dev->midi_out_buf[1] = 0; /* port */ - len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3, - EP1_BUFSIZE - 3); - - if (len <= 0) - return; - - dev->midi_out_buf[2] = len; - dev->midi_out_urb.transfer_buffer_length = len+3; - - ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC); - if (ret < 0) - log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed," - "ret=%d, len=%d\n", - substream, ret, len); - else - dev->midi_out_active = 1; -} - -static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up) -{ - struct snd_usb_caiaqdev *dev = substream->rmidi->private_data; - - if (up) { - dev->midi_out_substream = substream; - if (!dev->midi_out_active) - snd_usb_caiaq_midi_send(dev, substream); - } else { - dev->midi_out_substream = NULL; - } -} - - -static struct snd_rawmidi_ops snd_usb_caiaq_midi_output = -{ - .open = snd_usb_caiaq_midi_output_open, - .close = snd_usb_caiaq_midi_output_close, - .trigger = snd_usb_caiaq_midi_output_trigger, -}; - -static struct snd_rawmidi_ops snd_usb_caiaq_midi_input = -{ - .open = snd_usb_caiaq_midi_input_open, - .close = snd_usb_caiaq_midi_input_close, - .trigger = snd_usb_caiaq_midi_input_trigger, -}; - -void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, - int port, const char *buf, int len) -{ - if (!dev->midi_receive_substream) - return; - - snd_rawmidi_receive(dev->midi_receive_substream, buf, len); -} - -int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device) -{ - int ret; - struct snd_rawmidi *rmidi; - - ret = snd_rawmidi_new(device->chip.card, device->product_name, 0, - device->spec.num_midi_out, - device->spec.num_midi_in, - &rmidi); - - if (ret < 0) - return ret; - - strcpy(rmidi->name, device->product_name); - - rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX; - rmidi->private_data = device; - - if (device->spec.num_midi_out > 0) { - rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT; - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, - &snd_usb_caiaq_midi_output); - } - - if (device->spec.num_midi_in > 0) { - rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT; - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, - &snd_usb_caiaq_midi_input); - } - - device->rmidi = rmidi; - - return 0; -} - -void snd_usb_caiaq_midi_output_done(struct urb* urb) -{ - struct snd_usb_caiaqdev *dev = urb->context; - - dev->midi_out_active = 0; - if (urb->status != 0) - return; - - if (!dev->midi_out_substream) - return; - - snd_usb_caiaq_midi_send(dev, dev->midi_out_substream); -} - diff --git a/sound/usb/caiaq/caiaq-midi.h b/sound/usb/caiaq/caiaq-midi.h deleted file mode 100644 index 9d16db0..0000000 --- a/sound/usb/caiaq/caiaq-midi.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CAIAQ_MIDI_H -#define CAIAQ_MIDI_H - -int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev); -void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len); -void snd_usb_caiaq_midi_output_done(struct urb* urb); - -#endif /* CAIAQ_MIDI_H */ diff --git a/sound/usb/caiaq/control.c b/sound/usb/caiaq/control.c new file mode 100644 index 0000000..537102b --- /dev/null +++ b/sound/usb/caiaq/control.c @@ -0,0 +1,332 @@ +/* + * Copyright (c) 2007 Daniel Mack + * friendly supported by NI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include "device.h" +#include "control.h" + +#define CNT_INTVAL 0x10000 + +static int control_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol); + struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); + int pos = kcontrol->private_value; + int is_intval = pos & CNT_INTVAL; + unsigned int id = dev->chip.usb_id; + + uinfo->count = 1; + pos &= ~CNT_INTVAL; + + if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ) + && (pos == 0)) { + /* current input mode of A8DJ */ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 2; + return 0; + } + + if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ) + && (pos == 0)) { + /* current input mode of A4DJ */ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; + } + + if (is_intval) { + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 64; + } else { + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + } + + return 0; +} + +static int control_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol); + struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); + int pos = kcontrol->private_value; + + if (dev->chip.usb_id == + USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) { + /* A4DJ has only one control */ + /* do not expose hardware input mode 0 */ + ucontrol->value.integer.value[0] = dev->control_state[0] - 1; + return 0; + } + + if (pos & CNT_INTVAL) + ucontrol->value.integer.value[0] + = dev->control_state[pos & ~CNT_INTVAL]; + else + ucontrol->value.integer.value[0] + = !!(dev->control_state[pos / 8] & (1 << pos % 8)); + + return 0; +} + +static int control_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol); + struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); + int pos = kcontrol->private_value; + + if (dev->chip.usb_id == + USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) { + /* A4DJ has only one control */ + /* do not expose hardware input mode 0 */ + dev->control_state[0] = ucontrol->value.integer.value[0] + 1; + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, + dev->control_state, sizeof(dev->control_state)); + return 1; + } + + if (pos & CNT_INTVAL) { + dev->control_state[pos & ~CNT_INTVAL] + = ucontrol->value.integer.value[0]; + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, + dev->control_state, sizeof(dev->control_state)); + } else { + if (ucontrol->value.integer.value[0]) + dev->control_state[pos / 8] |= 1 << (pos % 8); + else + dev->control_state[pos / 8] &= ~(1 << (pos % 8)); + + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, + dev->control_state, sizeof(dev->control_state)); + } + + return 1; +} + +static struct snd_kcontrol_new kcontrol_template __devinitdata = { + .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .index = 0, + .info = control_info, + .get = control_get, + .put = control_put, + /* name and private_value filled later */ +}; + +struct caiaq_controller { + char *name; + int index; +}; + +static struct caiaq_controller ak1_controller[] = { + { "LED left", 2 }, + { "LED middle", 1 }, + { "LED right", 0 }, + { "LED ring", 3 } +}; + +static struct caiaq_controller rk2_controller[] = { + { "LED 1", 5 }, + { "LED 2", 4 }, + { "LED 3", 3 }, + { "LED 4", 2 }, + { "LED 5", 1 }, + { "LED 6", 0 }, + { "LED pedal", 6 }, + { "LED 7seg_1b", 8 }, + { "LED 7seg_1c", 9 }, + { "LED 7seg_2a", 10 }, + { "LED 7seg_2b", 11 }, + { "LED 7seg_2c", 12 }, + { "LED 7seg_2d", 13 }, + { "LED 7seg_2e", 14 }, + { "LED 7seg_2f", 15 }, + { "LED 7seg_2g", 16 }, + { "LED 7seg_3a", 17 }, + { "LED 7seg_3b", 18 }, + { "LED 7seg_3c", 19 }, + { "LED 7seg_3d", 20 }, + { "LED 7seg_3e", 21 }, + { "LED 7seg_3f", 22 }, + { "LED 7seg_3g", 23 } +}; + +static struct caiaq_controller rk3_controller[] = { + { "LED 7seg_1a", 0 + 0 }, + { "LED 7seg_1b", 0 + 1 }, + { "LED 7seg_1c", 0 + 2 }, + { "LED 7seg_1d", 0 + 3 }, + { "LED 7seg_1e", 0 + 4 }, + { "LED 7seg_1f", 0 + 5 }, + { "LED 7seg_1g", 0 + 6 }, + { "LED 7seg_1p", 0 + 7 }, + + { "LED 7seg_2a", 8 + 0 }, + { "LED 7seg_2b", 8 + 1 }, + { "LED 7seg_2c", 8 + 2 }, + { "LED 7seg_2d", 8 + 3 }, + { "LED 7seg_2e", 8 + 4 }, + { "LED 7seg_2f", 8 + 5 }, + { "LED 7seg_2g", 8 + 6 }, + { "LED 7seg_2p", 8 + 7 }, + + { "LED 7seg_3a", 16 + 0 }, + { "LED 7seg_3b", 16 + 1 }, + { "LED 7seg_3c", 16 + 2 }, + { "LED 7seg_3d", 16 + 3 }, + { "LED 7seg_3e", 16 + 4 }, + { "LED 7seg_3f", 16 + 5 }, + { "LED 7seg_3g", 16 + 6 }, + { "LED 7seg_3p", 16 + 7 }, + + { "LED 7seg_4a", 24 + 0 }, + { "LED 7seg_4b", 24 + 1 }, + { "LED 7seg_4c", 24 + 2 }, + { "LED 7seg_4d", 24 + 3 }, + { "LED 7seg_4e", 24 + 4 }, + { "LED 7seg_4f", 24 + 5 }, + { "LED 7seg_4g", 24 + 6 }, + { "LED 7seg_4p", 24 + 7 }, + + { "LED 1", 32 + 0 }, + { "LED 2", 32 + 1 }, + { "LED 3", 32 + 2 }, + { "LED 4", 32 + 3 }, + { "LED 5", 32 + 4 }, + { "LED 6", 32 + 5 }, + { "LED 7", 32 + 6 }, + { "LED 8", 32 + 7 }, + { "LED pedal", 32 + 8 } +}; + +static struct caiaq_controller kore_controller[] = { + { "LED F1", 8 | CNT_INTVAL }, + { "LED F2", 12 | CNT_INTVAL }, + { "LED F3", 0 | CNT_INTVAL }, + { "LED F4", 4 | CNT_INTVAL }, + { "LED F5", 11 | CNT_INTVAL }, + { "LED F6", 15 | CNT_INTVAL }, + { "LED F7", 3 | CNT_INTVAL }, + { "LED F8", 7 | CNT_INTVAL }, + { "LED touch1", 10 | CNT_INTVAL }, + { "LED touch2", 14 | CNT_INTVAL }, + { "LED touch3", 2 | CNT_INTVAL }, + { "LED touch4", 6 | CNT_INTVAL }, + { "LED touch5", 9 | CNT_INTVAL }, + { "LED touch6", 13 | CNT_INTVAL }, + { "LED touch7", 1 | CNT_INTVAL }, + { "LED touch8", 5 | CNT_INTVAL }, + { "LED left", 18 | CNT_INTVAL }, + { "LED right", 22 | CNT_INTVAL }, + { "LED up", 16 | CNT_INTVAL }, + { "LED down", 20 | CNT_INTVAL }, + { "LED stop", 23 | CNT_INTVAL }, + { "LED play", 21 | CNT_INTVAL }, + { "LED record", 19 | CNT_INTVAL }, + { "LED listen", 17 | CNT_INTVAL }, + { "LED lcd", 30 | CNT_INTVAL }, + { "LED menu", 28 | CNT_INTVAL }, + { "LED sound", 31 | CNT_INTVAL }, + { "LED esc", 29 | CNT_INTVAL }, + { "LED view", 27 | CNT_INTVAL }, + { "LED enter", 24 | CNT_INTVAL }, + { "LED control", 26 | CNT_INTVAL } +}; + +static struct caiaq_controller a8dj_controller[] = { + { "Current input mode", 0 | CNT_INTVAL }, + { "GND lift for TC Vinyl mode", 24 + 0 }, + { "GND lift for TC CD/Line mode", 24 + 1 }, + { "GND lift for phono mode", 24 + 2 }, + { "Software lock", 40 } +}; + +static struct caiaq_controller a4dj_controller[] = { + { "Current input mode", 0 | CNT_INTVAL } +}; + +static int __devinit add_controls(struct caiaq_controller *c, int num, + struct snd_usb_caiaqdev *dev) +{ + int i, ret; + struct snd_kcontrol *kc; + + for (i = 0; i < num; i++, c++) { + kcontrol_template.name = c->name; + kcontrol_template.private_value = c->index; + kc = snd_ctl_new1(&kcontrol_template, dev); + ret = snd_ctl_add(dev->chip.card, kc); + if (ret < 0) + return ret; + } + + return 0; +} + +int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev) +{ + int ret = 0; + + switch (dev->chip.usb_id) { + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): + ret = add_controls(ak1_controller, + ARRAY_SIZE(ak1_controller), dev); + break; + + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): + ret = add_controls(rk2_controller, + ARRAY_SIZE(rk2_controller), dev); + break; + + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): + ret = add_controls(rk3_controller, + ARRAY_SIZE(rk3_controller), dev); + break; + + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2): + ret = add_controls(kore_controller, + ARRAY_SIZE(kore_controller), dev); + break; + + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): + ret = add_controls(a8dj_controller, + ARRAY_SIZE(a8dj_controller), dev); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): + ret = add_controls(a4dj_controller, + ARRAY_SIZE(a4dj_controller), dev); + break; + } + + return ret; +} + diff --git a/sound/usb/caiaq/control.h b/sound/usb/caiaq/control.h new file mode 100644 index 0000000..2e7ab1a --- /dev/null +++ b/sound/usb/caiaq/control.h @@ -0,0 +1,6 @@ +#ifndef CAIAQ_CONTROL_H +#define CAIAQ_CONTROL_H + +int snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev); + +#endif /* CAIAQ_CONTROL_H */ diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c new file mode 100644 index 0000000..6d51770 --- /dev/null +++ b/sound/usb/caiaq/device.c @@ -0,0 +1,521 @@ +/* + * caiaq.c: ALSA driver for caiaq/NativeInstruments devices + * + * Copyright (c) 2007 Daniel Mack + * Karsten Wiese + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "device.h" +#include "audio.h" +#include "midi.h" +#include "control.h" +#include "input.h" + +MODULE_AUTHOR("Daniel Mack "); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," + "{Native Instruments, RigKontrol3}," + "{Native Instruments, Kore Controller}," + "{Native Instruments, Kore Controller 2}," + "{Native Instruments, Audio Kontrol 1}," + "{Native Instruments, Audio 4 DJ}," + "{Native Instruments, Audio 8 DJ}," + "{Native Instruments, Session I/O}," + "{Native Instruments, GuitarRig mobile}"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ +static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */ +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ +static int snd_card_used[SNDRV_CARDS]; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for the caiaq sound device"); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for the caiaq soundcard."); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable the caiaq soundcard."); + +enum { + SAMPLERATE_44100 = 0, + SAMPLERATE_48000 = 1, + SAMPLERATE_96000 = 2, + SAMPLERATE_192000 = 3, + SAMPLERATE_88200 = 4, + SAMPLERATE_INVALID = 0xff +}; + +enum { + DEPTH_NONE = 0, + DEPTH_16 = 1, + DEPTH_24 = 2, + DEPTH_32 = 3 +}; + +static struct usb_device_id snd_usb_id_table[] = { + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_RIGKONTROL2 + }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_RIGKONTROL3 + }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_KORECONTROLLER + }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_KORECONTROLLER2 + }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_AK1 + }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_AUDIO8DJ + }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_SESSIONIO + }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_GUITARRIGMOBILE + }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_AUDIO4DJ + }, + { /* terminator */ } +}; + +static void usb_ep1_command_reply_dispatch (struct urb* urb) +{ + int ret; + struct snd_usb_caiaqdev *dev = urb->context; + unsigned char *buf = urb->transfer_buffer; + + if (urb->status || !dev) { + log("received EP1 urb->status = %i\n", urb->status); + return; + } + + switch(buf[0]) { + case EP1_CMD_GET_DEVICE_INFO: + memcpy(&dev->spec, buf+1, sizeof(struct caiaq_device_spec)); + dev->spec.fw_version = le16_to_cpu(dev->spec.fw_version); + debug("device spec (firmware %d): audio: %d in, %d out, " + "MIDI: %d in, %d out, data alignment %d\n", + dev->spec.fw_version, + dev->spec.num_analog_audio_in, + dev->spec.num_analog_audio_out, + dev->spec.num_midi_in, + dev->spec.num_midi_out, + dev->spec.data_alignment); + + dev->spec_received++; + wake_up(&dev->ep1_wait_queue); + break; + case EP1_CMD_AUDIO_PARAMS: + dev->audio_parm_answer = buf[1]; + wake_up(&dev->ep1_wait_queue); + break; + case EP1_CMD_MIDI_READ: + snd_usb_caiaq_midi_handle_input(dev, buf[1], buf + 3, buf[2]); + break; + case EP1_CMD_READ_IO: + if (dev->chip.usb_id == + USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) { + if (urb->actual_length > sizeof(dev->control_state)) + urb->actual_length = sizeof(dev->control_state); + memcpy(dev->control_state, buf + 1, urb->actual_length); + wake_up(&dev->ep1_wait_queue); + break; + } +#ifdef CONFIG_SND_USB_CAIAQ_INPUT + case EP1_CMD_READ_ERP: + case EP1_CMD_READ_ANALOG: + snd_usb_caiaq_input_dispatch(dev, buf, urb->actual_length); +#endif + break; + } + + dev->ep1_in_urb.actual_length = 0; + ret = usb_submit_urb(&dev->ep1_in_urb, GFP_ATOMIC); + if (ret < 0) + log("unable to submit urb. OOM!?\n"); +} + +int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev, + unsigned char command, + const unsigned char *buffer, + int len) +{ + int actual_len; + struct usb_device *usb_dev = dev->chip.dev; + + if (!usb_dev) + return -EIO; + + if (len > EP1_BUFSIZE - 1) + len = EP1_BUFSIZE - 1; + + if (buffer && len > 0) + memcpy(dev->ep1_out_buf+1, buffer, len); + + dev->ep1_out_buf[0] = command; + return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1), + dev->ep1_out_buf, len+1, &actual_len, 200); +} + +int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, + int rate, int depth, int bpp) +{ + int ret; + char tmp[5]; + + switch (rate) { + case 44100: tmp[0] = SAMPLERATE_44100; break; + case 48000: tmp[0] = SAMPLERATE_48000; break; + case 88200: tmp[0] = SAMPLERATE_88200; break; + case 96000: tmp[0] = SAMPLERATE_96000; break; + case 192000: tmp[0] = SAMPLERATE_192000; break; + default: return -EINVAL; + } + + switch (depth) { + case 16: tmp[1] = DEPTH_16; break; + case 24: tmp[1] = DEPTH_24; break; + default: return -EINVAL; + } + + tmp[2] = bpp & 0xff; + tmp[3] = bpp >> 8; + tmp[4] = 1; /* packets per microframe */ + + debug("setting audio params: %d Hz, %d bits, %d bpp\n", + rate, depth, bpp); + + dev->audio_parm_answer = -1; + ret = snd_usb_caiaq_send_command(dev, EP1_CMD_AUDIO_PARAMS, + tmp, sizeof(tmp)); + + if (ret) + return ret; + + if (!wait_event_timeout(dev->ep1_wait_queue, + dev->audio_parm_answer >= 0, HZ)) + return -EPIPE; + + if (dev->audio_parm_answer != 1) + debug("unable to set the device's audio params\n"); + else + dev->bpp = bpp; + + return dev->audio_parm_answer == 1 ? 0 : -EINVAL; +} + +int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, + int digital, int analog, int erp) +{ + char tmp[3] = { digital, analog, erp }; + return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG, + tmp, sizeof(tmp)); +} + +static void __devinit setup_card(struct snd_usb_caiaqdev *dev) +{ + int ret; + char val[4]; + + /* device-specific startup specials */ + switch (dev->chip.usb_id) { + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): + /* RigKontrol2 - display centered dash ('-') */ + val[0] = 0x00; + val[1] = 0x00; + val[2] = 0x01; + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 3); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): + /* RigKontrol2 - display two centered dashes ('--') */ + val[0] = 0x00; + val[1] = 0x40; + val[2] = 0x40; + val[3] = 0x00; + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 4); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): + /* Audio Kontrol 1 - make USB-LED stop blinking */ + val[0] = 0x00; + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 1); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): + /* Audio 8 DJ - trigger read of current settings */ + dev->control_state[0] = 0xff; + snd_usb_caiaq_set_auto_msg(dev, 1, 0, 0); + snd_usb_caiaq_send_command(dev, EP1_CMD_READ_IO, NULL, 0); + + if (!wait_event_timeout(dev->ep1_wait_queue, + dev->control_state[0] != 0xff, HZ)) + return; + + /* fix up some defaults */ + if ((dev->control_state[1] != 2) || + (dev->control_state[2] != 3) || + (dev->control_state[4] != 2)) { + dev->control_state[1] = 2; + dev->control_state[2] = 3; + dev->control_state[4] = 2; + snd_usb_caiaq_send_command(dev, + EP1_CMD_WRITE_IO, dev->control_state, 6); + } + + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): + /* Audio 4 DJ - default input mode to phono */ + dev->control_state[0] = 2; + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, + dev->control_state, 1); + break; + } + + if (dev->spec.num_analog_audio_out + + dev->spec.num_analog_audio_in + + dev->spec.num_digital_audio_out + + dev->spec.num_digital_audio_in > 0) { + ret = snd_usb_caiaq_audio_init(dev); + if (ret < 0) + log("Unable to set up audio system (ret=%d)\n", ret); + } + + if (dev->spec.num_midi_in + + dev->spec.num_midi_out > 0) { + ret = snd_usb_caiaq_midi_init(dev); + if (ret < 0) + log("Unable to set up MIDI system (ret=%d)\n", ret); + } + +#ifdef CONFIG_SND_USB_CAIAQ_INPUT + ret = snd_usb_caiaq_input_init(dev); + if (ret < 0) + log("Unable to set up input system (ret=%d)\n", ret); +#endif + + /* finally, register the card and all its sub-instances */ + ret = snd_card_register(dev->chip.card); + if (ret < 0) { + log("snd_card_register() returned %d\n", ret); + snd_card_free(dev->chip.card); + } + + ret = snd_usb_caiaq_control_init(dev); + if (ret < 0) + log("Unable to set up control system (ret=%d)\n", ret); +} + +static int create_card(struct usb_device* usb_dev, struct snd_card **cardp) +{ + int devnum; + int err; + struct snd_card *card; + struct snd_usb_caiaqdev *dev; + + for (devnum = 0; devnum < SNDRV_CARDS; devnum++) + if (enable[devnum] && !snd_card_used[devnum]) + break; + + if (devnum >= SNDRV_CARDS) + return -ENODEV; + + err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, + sizeof(struct snd_usb_caiaqdev), &card); + if (err < 0) + return err; + + dev = caiaqdev(card); + dev->chip.dev = usb_dev; + dev->chip.card = card; + dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct)); + spin_lock_init(&dev->spinlock); + snd_card_set_dev(card, &usb_dev->dev); + + *cardp = card; + return 0; +} + +static int __devinit init_card(struct snd_usb_caiaqdev *dev) +{ + char *c; + struct usb_device *usb_dev = dev->chip.dev; + struct snd_card *card = dev->chip.card; + int err, len; + + if (usb_set_interface(usb_dev, 0, 1) != 0) { + log("can't set alt interface.\n"); + return -EIO; + } + + usb_init_urb(&dev->ep1_in_urb); + usb_init_urb(&dev->midi_out_urb); + + usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev, + usb_rcvbulkpipe(usb_dev, 0x1), + dev->ep1_in_buf, EP1_BUFSIZE, + usb_ep1_command_reply_dispatch, dev); + + usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev, + usb_sndbulkpipe(usb_dev, 0x1), + dev->midi_out_buf, EP1_BUFSIZE, + snd_usb_caiaq_midi_output_done, dev); + + init_waitqueue_head(&dev->ep1_wait_queue); + init_waitqueue_head(&dev->prepare_wait_queue); + + if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0) + return -EIO; + + err = snd_usb_caiaq_send_command(dev, EP1_CMD_GET_DEVICE_INFO, NULL, 0); + if (err) + return err; + + if (!wait_event_timeout(dev->ep1_wait_queue, dev->spec_received, HZ)) + return -ENODEV; + + usb_string(usb_dev, usb_dev->descriptor.iManufacturer, + dev->vendor_name, CAIAQ_USB_STR_LEN); + + usb_string(usb_dev, usb_dev->descriptor.iProduct, + dev->product_name, CAIAQ_USB_STR_LEN); + + usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, + dev->serial, CAIAQ_USB_STR_LEN); + + /* terminate serial string at first white space occurence */ + c = strchr(dev->serial, ' '); + if (c) + *c = '\0'; + + strcpy(card->driver, MODNAME); + strcpy(card->shortname, dev->product_name); + + len = snprintf(card->longname, sizeof(card->longname), + "%s %s (serial %s, ", + dev->vendor_name, dev->product_name, dev->serial); + + if (len < sizeof(card->longname) - 2) + len += usb_make_path(usb_dev, card->longname + len, + sizeof(card->longname) - len); + + card->longname[len++] = ')'; + card->longname[len] = '\0'; + setup_card(dev); + return 0; +} + +static int __devinit snd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret; + struct snd_card *card; + struct usb_device *device = interface_to_usbdev(intf); + + ret = create_card(device, &card); + + if (ret < 0) + return ret; + + usb_set_intfdata(intf, card); + ret = init_card(caiaqdev(card)); + if (ret < 0) { + log("unable to init card! (ret=%d)\n", ret); + snd_card_free(card); + return ret; + } + + return 0; +} + +static void snd_disconnect(struct usb_interface *intf) +{ + struct snd_usb_caiaqdev *dev; + struct snd_card *card = usb_get_intfdata(intf); + + debug("%s(%p)\n", __func__, intf); + + if (!card) + return; + + dev = caiaqdev(card); + snd_card_disconnect(card); + +#ifdef CONFIG_SND_USB_CAIAQ_INPUT + snd_usb_caiaq_input_free(dev); +#endif + snd_usb_caiaq_audio_free(dev); + + usb_kill_urb(&dev->ep1_in_urb); + usb_kill_urb(&dev->midi_out_urb); + + snd_card_free(card); + usb_reset_device(interface_to_usbdev(intf)); +} + + +MODULE_DEVICE_TABLE(usb, snd_usb_id_table); +static struct usb_driver snd_usb_driver = { + .name = MODNAME, + .probe = snd_probe, + .disconnect = snd_disconnect, + .id_table = snd_usb_id_table, +}; + +static int __init snd_module_init(void) +{ + return usb_register(&snd_usb_driver); +} + +static void __exit snd_module_exit(void) +{ + usb_deregister(&snd_usb_driver); +} + +module_init(snd_module_init) +module_exit(snd_module_exit) + diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h new file mode 100644 index 0000000..4cce1ad --- /dev/null +++ b/sound/usb/caiaq/device.h @@ -0,0 +1,131 @@ +#ifndef CAIAQ_DEVICE_H +#define CAIAQ_DEVICE_H + +#include "../usbaudio.h" + +#define USB_VID_NATIVEINSTRUMENTS 0x17cc + +#define USB_PID_RIGKONTROL2 0x1969 +#define USB_PID_RIGKONTROL3 0x1940 +#define USB_PID_KORECONTROLLER 0x4711 +#define USB_PID_KORECONTROLLER2 0x4712 +#define USB_PID_AK1 0x0815 +#define USB_PID_AUDIO4DJ 0x0839 +#define USB_PID_AUDIO8DJ 0x1978 +#define USB_PID_SESSIONIO 0x1915 +#define USB_PID_GUITARRIGMOBILE 0x0d8d + +#define EP1_BUFSIZE 64 +#define CAIAQ_USB_STR_LEN 0xff +#define MAX_STREAMS 32 + +//#define SND_USB_CAIAQ_DEBUG + +#define MODNAME "snd-usb-caiaq" +#define log(x...) snd_printk(KERN_WARNING MODNAME" log: " x) + +#ifdef SND_USB_CAIAQ_DEBUG +#define debug(x...) snd_printk(KERN_WARNING MODNAME " debug: " x) +#else +#define debug(x...) do { } while(0) +#endif + +#define EP1_CMD_GET_DEVICE_INFO 0x1 +#define EP1_CMD_READ_ERP 0x2 +#define EP1_CMD_READ_ANALOG 0x3 +#define EP1_CMD_READ_IO 0x4 +#define EP1_CMD_WRITE_IO 0x5 +#define EP1_CMD_MIDI_READ 0x6 +#define EP1_CMD_MIDI_WRITE 0x7 +#define EP1_CMD_AUDIO_PARAMS 0x9 +#define EP1_CMD_AUTO_MSG 0xb +#define EP1_CMD_DIMM_LEDS 0xc + +struct caiaq_device_spec { + unsigned short fw_version; + unsigned char hw_subtype; + unsigned char num_erp; + unsigned char num_analog_in; + unsigned char num_digital_in; + unsigned char num_digital_out; + unsigned char num_analog_audio_out; + unsigned char num_analog_audio_in; + unsigned char num_digital_audio_out; + unsigned char num_digital_audio_in; + unsigned char num_midi_out; + unsigned char num_midi_in; + unsigned char data_alignment; +} __attribute__ ((packed)); + +struct snd_usb_caiaq_cb_info; + +struct snd_usb_caiaqdev { + struct snd_usb_audio chip; + + struct urb ep1_in_urb; + struct urb midi_out_urb; + struct urb **data_urbs_in; + struct urb **data_urbs_out; + struct snd_usb_caiaq_cb_info *data_cb_info; + + unsigned char ep1_in_buf[EP1_BUFSIZE]; + unsigned char ep1_out_buf[EP1_BUFSIZE]; + unsigned char midi_out_buf[EP1_BUFSIZE]; + + struct caiaq_device_spec spec; + spinlock_t spinlock; + wait_queue_head_t ep1_wait_queue; + wait_queue_head_t prepare_wait_queue; + int spec_received, audio_parm_answer; + int midi_out_active; + + char vendor_name[CAIAQ_USB_STR_LEN]; + char product_name[CAIAQ_USB_STR_LEN]; + char serial[CAIAQ_USB_STR_LEN]; + + int n_streams, n_audio_in, n_audio_out; + int streaming, first_packet, output_running; + int audio_in_buf_pos[MAX_STREAMS]; + int audio_out_buf_pos[MAX_STREAMS]; + int period_in_count[MAX_STREAMS]; + int period_out_count[MAX_STREAMS]; + int input_panic, output_panic, warned; + char *audio_in_buf, *audio_out_buf; + unsigned int samplerates, bpp; + + struct snd_pcm_substream *sub_playback[MAX_STREAMS]; + struct snd_pcm_substream *sub_capture[MAX_STREAMS]; + + /* Controls */ + unsigned char control_state[64]; + + /* Linux input */ +#ifdef CONFIG_SND_USB_CAIAQ_INPUT + struct input_dev *input_dev; + char phys[64]; /* physical device path */ + unsigned short keycode[64]; +#endif + + /* ALSA */ + struct snd_pcm *pcm; + struct snd_pcm_hardware pcm_info; + struct snd_rawmidi *rmidi; + struct snd_rawmidi_substream *midi_receive_substream; + struct snd_rawmidi_substream *midi_out_substream; +}; + +struct snd_usb_caiaq_cb_info { + struct snd_usb_caiaqdev *dev; + int index; +}; + +#define caiaqdev(c) ((struct snd_usb_caiaqdev*)(c)->private_data) + +int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, int rate, int depth, int bbp); +int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, int digital, int analog, int erp); +int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev, + unsigned char command, + const unsigned char *buffer, + int len); + +#endif /* CAIAQ_DEVICE_H */ diff --git a/sound/usb/caiaq/input.c b/sound/usb/caiaq/input.c new file mode 100644 index 0000000..a48d309 --- /dev/null +++ b/sound/usb/caiaq/input.c @@ -0,0 +1,358 @@ +/* + * Copyright (c) 2006,2007 Daniel Mack, Tim Ruetz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include + +#include "device.h" +#include "input.h" + +static unsigned short keycode_ak1[] = { KEY_C, KEY_B, KEY_A }; +static unsigned short keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4, + KEY_5, KEY_6, KEY_7 }; +static unsigned short keycode_rk3[] = { KEY_1, KEY_2, KEY_3, KEY_4, + KEY_5, KEY_6, KEY_7, KEY_5, KEY_6 }; + +static unsigned short keycode_kore[] = { + KEY_FN_F1, /* "menu" */ + KEY_FN_F7, /* "lcd backlight */ + KEY_FN_F2, /* "control" */ + KEY_FN_F3, /* "enter" */ + KEY_FN_F4, /* "view" */ + KEY_FN_F5, /* "esc" */ + KEY_FN_F6, /* "sound" */ + KEY_FN_F8, /* array spacer, never triggered. */ + KEY_RIGHT, + KEY_DOWN, + KEY_UP, + KEY_LEFT, + KEY_SOUND, /* "listen" */ + KEY_RECORD, + KEY_PLAYPAUSE, + KEY_STOP, + BTN_4, /* 8 softkeys */ + BTN_3, + BTN_2, + BTN_1, + BTN_8, + BTN_7, + BTN_6, + BTN_5, + KEY_BRL_DOT4, /* touch sensitive knobs */ + KEY_BRL_DOT3, + KEY_BRL_DOT2, + KEY_BRL_DOT1, + KEY_BRL_DOT8, + KEY_BRL_DOT7, + KEY_BRL_DOT6, + KEY_BRL_DOT5 +}; + +#define DEG90 (range / 2) +#define DEG180 (range) +#define DEG270 (DEG90 + DEG180) +#define DEG360 (DEG180 * 2) +#define HIGH_PEAK (268) +#define LOW_PEAK (-7) + +/* some of these devices have endless rotation potentiometers + * built in which use two tapers, 90 degrees phase shifted. + * this algorithm decodes them to one single value, ranging + * from 0 to 999 */ +static unsigned int decode_erp(unsigned char a, unsigned char b) +{ + int weight_a, weight_b; + int pos_a, pos_b; + int ret; + int range = HIGH_PEAK - LOW_PEAK; + int mid_value = (HIGH_PEAK + LOW_PEAK) / 2; + + weight_b = abs(mid_value - a) - (range / 2 - 100) / 2; + + if (weight_b < 0) + weight_b = 0; + + if (weight_b > 100) + weight_b = 100; + + weight_a = 100 - weight_b; + + if (a < mid_value) { + /* 0..90 and 270..360 degrees */ + pos_b = b - LOW_PEAK + DEG270; + if (pos_b >= DEG360) + pos_b -= DEG360; + } else + /* 90..270 degrees */ + pos_b = HIGH_PEAK - b + DEG90; + + + if (b > mid_value) + /* 0..180 degrees */ + pos_a = a - LOW_PEAK; + else + /* 180..360 degrees */ + pos_a = HIGH_PEAK - a + DEG180; + + /* interpolate both slider values, depending on weight factors */ + /* 0..99 x DEG360 */ + ret = pos_a * weight_a + pos_b * weight_b; + + /* normalize to 0..999 */ + ret *= 10; + ret /= DEG360; + + if (ret < 0) + ret += 1000; + + if (ret >= 1000) + ret -= 1000; + + return ret; +} + +#undef DEG90 +#undef DEG180 +#undef DEG270 +#undef DEG360 +#undef HIGH_PEAK +#undef LOW_PEAK + + +static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *dev, + const unsigned char *buf, + unsigned int len) +{ + struct input_dev *input_dev = dev->input_dev; + + switch (dev->chip.usb_id) { + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): + input_report_abs(input_dev, ABS_X, (buf[4] << 8) | buf[5]); + input_report_abs(input_dev, ABS_Y, (buf[0] << 8) | buf[1]); + input_report_abs(input_dev, ABS_Z, (buf[2] << 8) | buf[3]); + input_sync(input_dev); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): + input_report_abs(input_dev, ABS_X, (buf[0] << 8) | buf[1]); + input_report_abs(input_dev, ABS_Y, (buf[2] << 8) | buf[3]); + input_report_abs(input_dev, ABS_Z, (buf[4] << 8) | buf[5]); + input_sync(input_dev); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2): + input_report_abs(input_dev, ABS_X, (buf[0] << 8) | buf[1]); + input_report_abs(input_dev, ABS_Y, (buf[2] << 8) | buf[3]); + input_report_abs(input_dev, ABS_Z, (buf[4] << 8) | buf[5]); + input_sync(input_dev); + break; + } +} + +static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev, + const char *buf, unsigned int len) +{ + struct input_dev *input_dev = dev->input_dev; + int i; + + switch (dev->chip.usb_id) { + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): + i = decode_erp(buf[0], buf[1]); + input_report_abs(input_dev, ABS_X, i); + input_sync(input_dev); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2): + i = decode_erp(buf[7], buf[5]); + input_report_abs(input_dev, ABS_HAT0X, i); + i = decode_erp(buf[12], buf[14]); + input_report_abs(input_dev, ABS_HAT0Y, i); + i = decode_erp(buf[15], buf[13]); + input_report_abs(input_dev, ABS_HAT1X, i); + i = decode_erp(buf[0], buf[2]); + input_report_abs(input_dev, ABS_HAT1Y, i); + i = decode_erp(buf[3], buf[1]); + input_report_abs(input_dev, ABS_HAT2X, i); + i = decode_erp(buf[8], buf[10]); + input_report_abs(input_dev, ABS_HAT2Y, i); + i = decode_erp(buf[11], buf[9]); + input_report_abs(input_dev, ABS_HAT3X, i); + i = decode_erp(buf[4], buf[6]); + input_report_abs(input_dev, ABS_HAT3Y, i); + input_sync(input_dev); + break; + } +} + +static void snd_caiaq_input_read_io(struct snd_usb_caiaqdev *dev, + char *buf, unsigned int len) +{ + struct input_dev *input_dev = dev->input_dev; + unsigned short *keycode = input_dev->keycode; + int i; + + if (!keycode) + return; + + if (input_dev->id.product == USB_PID_RIGKONTROL2) + for (i = 0; i < len; i++) + buf[i] = ~buf[i]; + + for (i = 0; i < input_dev->keycodemax && i < len * 8; i++) + input_report_key(input_dev, keycode[i], + buf[i / 8] & (1 << (i % 8))); + + if (dev->chip.usb_id == + USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER) || + dev->chip.usb_id == + USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2)) + input_report_abs(dev->input_dev, ABS_MISC, 255 - buf[4]); + + input_sync(input_dev); +} + +void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, + char *buf, + unsigned int len) +{ + if (!dev->input_dev || len < 1) + return; + + switch (buf[0]) { + case EP1_CMD_READ_ANALOG: + snd_caiaq_input_read_analog(dev, buf + 1, len - 1); + break; + case EP1_CMD_READ_ERP: + snd_caiaq_input_read_erp(dev, buf + 1, len - 1); + break; + case EP1_CMD_READ_IO: + snd_caiaq_input_read_io(dev, buf + 1, len - 1); + break; + } +} + +int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev) +{ + struct usb_device *usb_dev = dev->chip.dev; + struct input_dev *input; + int i, ret; + + input = input_allocate_device(); + if (!input) + return -ENOMEM; + + usb_make_path(usb_dev, dev->phys, sizeof(dev->phys)); + strlcat(dev->phys, "/input0", sizeof(dev->phys)); + + input->name = dev->product_name; + input->phys = dev->phys; + usb_to_input_id(usb_dev, &input->id); + input->dev.parent = &usb_dev->dev; + + switch (dev->chip.usb_id) { + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | + BIT_MASK(ABS_Z); + BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_rk2)); + memcpy(dev->keycode, keycode_rk2, sizeof(keycode_rk2)); + input->keycodemax = ARRAY_SIZE(keycode_rk2); + input_set_abs_params(input, ABS_X, 0, 4096, 0, 10); + input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10); + input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10); + snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | + BIT_MASK(ABS_Z); + BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_rk3)); + memcpy(dev->keycode, keycode_rk3, sizeof(keycode_rk3)); + input->keycodemax = ARRAY_SIZE(keycode_rk3); + input_set_abs_params(input, ABS_X, 0, 1024, 0, 10); + input_set_abs_params(input, ABS_Y, 0, 1024, 0, 10); + input_set_abs_params(input, ABS_Z, 0, 1024, 0, 10); + snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->absbit[0] = BIT_MASK(ABS_X); + BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_ak1)); + memcpy(dev->keycode, keycode_ak1, sizeof(keycode_ak1)); + input->keycodemax = ARRAY_SIZE(keycode_ak1); + input_set_abs_params(input, ABS_X, 0, 999, 0, 10); + snd_usb_caiaq_set_auto_msg(dev, 1, 0, 5); + break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2): + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->absbit[0] = BIT_MASK(ABS_HAT0X) | BIT_MASK(ABS_HAT0Y) | + BIT_MASK(ABS_HAT1X) | BIT_MASK(ABS_HAT1Y) | + BIT_MASK(ABS_HAT2X) | BIT_MASK(ABS_HAT2Y) | + BIT_MASK(ABS_HAT3X) | BIT_MASK(ABS_HAT3Y) | + BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | + BIT_MASK(ABS_Z); + input->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC); + BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_kore)); + memcpy(dev->keycode, keycode_kore, sizeof(keycode_kore)); + input->keycodemax = ARRAY_SIZE(keycode_kore); + input_set_abs_params(input, ABS_HAT0X, 0, 999, 0, 10); + input_set_abs_params(input, ABS_HAT0Y, 0, 999, 0, 10); + input_set_abs_params(input, ABS_HAT1X, 0, 999, 0, 10); + input_set_abs_params(input, ABS_HAT1Y, 0, 999, 0, 10); + input_set_abs_params(input, ABS_HAT2X, 0, 999, 0, 10); + input_set_abs_params(input, ABS_HAT2Y, 0, 999, 0, 10); + input_set_abs_params(input, ABS_HAT3X, 0, 999, 0, 10); + input_set_abs_params(input, ABS_HAT3Y, 0, 999, 0, 10); + input_set_abs_params(input, ABS_X, 0, 4096, 0, 10); + input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10); + input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10); + input_set_abs_params(input, ABS_MISC, 0, 255, 0, 1); + snd_usb_caiaq_set_auto_msg(dev, 1, 10, 5); + break; + default: + /* no input methods supported on this device */ + input_free_device(input); + return 0; + } + + input->keycode = dev->keycode; + input->keycodesize = sizeof(unsigned short); + for (i = 0; i < input->keycodemax; i++) + __set_bit(dev->keycode[i], input->keybit); + + ret = input_register_device(input); + if (ret < 0) { + input_free_device(input); + return ret; + } + + dev->input_dev = input; + return 0; +} + +void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev) +{ + if (!dev || !dev->input_dev) + return; + + input_unregister_device(dev->input_dev); + dev->input_dev = NULL; +} + diff --git a/sound/usb/caiaq/input.h b/sound/usb/caiaq/input.h new file mode 100644 index 0000000..ced5355 --- /dev/null +++ b/sound/usb/caiaq/input.h @@ -0,0 +1,8 @@ +#ifndef CAIAQ_INPUT_H +#define CAIAQ_INPUT_H + +void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, char *buf, unsigned int len); +int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev); +void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev); + +#endif diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c new file mode 100644 index 0000000..8fa8cd8 --- /dev/null +++ b/sound/usb/caiaq/midi.c @@ -0,0 +1,173 @@ +/* + * Copyright (c) 2006,2007 Daniel Mack + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include + +#include "device.h" +#include "midi.h" + +static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream) +{ + return 0; +} + +static int snd_usb_caiaq_midi_input_close(struct snd_rawmidi_substream *substream) +{ + return 0; +} + +static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *substream, int up) +{ + struct snd_usb_caiaqdev *dev = substream->rmidi->private_data; + + if (!dev) + return; + + dev->midi_receive_substream = up ? substream : NULL; +} + + +static int snd_usb_caiaq_midi_output_open(struct snd_rawmidi_substream *substream) +{ + return 0; +} + +static int snd_usb_caiaq_midi_output_close(struct snd_rawmidi_substream *substream) +{ + struct snd_usb_caiaqdev *dev = substream->rmidi->private_data; + if (dev->midi_out_active) { + usb_kill_urb(&dev->midi_out_urb); + dev->midi_out_active = 0; + } + return 0; +} + +static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev, + struct snd_rawmidi_substream *substream) +{ + int len, ret; + + dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE; + dev->midi_out_buf[1] = 0; /* port */ + len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3, + EP1_BUFSIZE - 3); + + if (len <= 0) + return; + + dev->midi_out_buf[2] = len; + dev->midi_out_urb.transfer_buffer_length = len+3; + + ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC); + if (ret < 0) + log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed," + "ret=%d, len=%d\n", + substream, ret, len); + else + dev->midi_out_active = 1; +} + +static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up) +{ + struct snd_usb_caiaqdev *dev = substream->rmidi->private_data; + + if (up) { + dev->midi_out_substream = substream; + if (!dev->midi_out_active) + snd_usb_caiaq_midi_send(dev, substream); + } else { + dev->midi_out_substream = NULL; + } +} + + +static struct snd_rawmidi_ops snd_usb_caiaq_midi_output = +{ + .open = snd_usb_caiaq_midi_output_open, + .close = snd_usb_caiaq_midi_output_close, + .trigger = snd_usb_caiaq_midi_output_trigger, +}; + +static struct snd_rawmidi_ops snd_usb_caiaq_midi_input = +{ + .open = snd_usb_caiaq_midi_input_open, + .close = snd_usb_caiaq_midi_input_close, + .trigger = snd_usb_caiaq_midi_input_trigger, +}; + +void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, + int port, const char *buf, int len) +{ + if (!dev->midi_receive_substream) + return; + + snd_rawmidi_receive(dev->midi_receive_substream, buf, len); +} + +int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device) +{ + int ret; + struct snd_rawmidi *rmidi; + + ret = snd_rawmidi_new(device->chip.card, device->product_name, 0, + device->spec.num_midi_out, + device->spec.num_midi_in, + &rmidi); + + if (ret < 0) + return ret; + + strcpy(rmidi->name, device->product_name); + + rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX; + rmidi->private_data = device; + + if (device->spec.num_midi_out > 0) { + rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT; + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, + &snd_usb_caiaq_midi_output); + } + + if (device->spec.num_midi_in > 0) { + rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT; + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, + &snd_usb_caiaq_midi_input); + } + + device->rmidi = rmidi; + + return 0; +} + +void snd_usb_caiaq_midi_output_done(struct urb* urb) +{ + struct snd_usb_caiaqdev *dev = urb->context; + + dev->midi_out_active = 0; + if (urb->status != 0) + return; + + if (!dev->midi_out_substream) + return; + + snd_usb_caiaq_midi_send(dev, dev->midi_out_substream); +} + diff --git a/sound/usb/caiaq/midi.h b/sound/usb/caiaq/midi.h new file mode 100644 index 0000000..9d16db0 --- /dev/null +++ b/sound/usb/caiaq/midi.h @@ -0,0 +1,8 @@ +#ifndef CAIAQ_MIDI_H +#define CAIAQ_MIDI_H + +int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev); +void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len); +void snd_usb_caiaq_midi_output_done(struct urb* urb); + +#endif /* CAIAQ_MIDI_H */ -- cgit v0.10.2 From 6b82f3cb2d480b7714eb0ff61aee99c22160389e Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Tue, 14 Apr 2009 07:37:40 -0400 Subject: ext4: really print the find_group_flex fallback warning only once Missing braces caused the warning to print more than once. Signed-Off-By: Chuck Ebbert Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 47b84e8..cbce5aa 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -831,11 +831,12 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode) ret2 = find_group_flex(sb, dir, &group); if (ret2 == -1) { ret2 = find_group_other(sb, dir, &group, mode); - if (ret2 == 0 && once) + if (ret2 == 0 && once) { once = 0; printk(KERN_NOTICE "ext4: find_group_flex " "failed, fallback succeeded dir %lu\n", dir->i_ino); + } } goto got_group; } -- cgit v0.10.2 From 67c457a8c378a006a34d92f9bd3078a80a92f250 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 14 Apr 2009 07:50:56 -0400 Subject: jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records The revoke records must be written using the same way as the rest of the blocks during the commit process; that is, either marked as synchronous writes or as asynchornous writes. Signed-off-by: "Theodore Ts'o" diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 073c8c3..0b7d3b8 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -506,7 +506,8 @@ void jbd2_journal_commit_transaction(journal_t *journal) if (err) jbd2_journal_abort(journal, err); - jbd2_journal_write_revoke_records(journal, commit_transaction); + jbd2_journal_write_revoke_records(journal, commit_transaction, + write_op); jbd_debug(3, "JBD: commit phase 2\n"); diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c index bbe6d59..a360b06 100644 --- a/fs/jbd2/revoke.c +++ b/fs/jbd2/revoke.c @@ -86,6 +86,7 @@ #include #include #include +#include #endif #include @@ -118,8 +119,8 @@ struct jbd2_revoke_table_s #ifdef __KERNEL__ static void write_one_revoke_record(journal_t *, transaction_t *, struct journal_head **, int *, - struct jbd2_revoke_record_s *); -static void flush_descriptor(journal_t *, struct journal_head *, int); + struct jbd2_revoke_record_s *, int); +static void flush_descriptor(journal_t *, struct journal_head *, int, int); #endif /* Utility functions to maintain the revoke table */ @@ -499,7 +500,8 @@ void jbd2_journal_switch_revoke_table(journal_t *journal) * revoke hash, deleting the entries as we go. */ void jbd2_journal_write_revoke_records(journal_t *journal, - transaction_t *transaction) + transaction_t *transaction, + int write_op) { struct journal_head *descriptor; struct jbd2_revoke_record_s *record; @@ -523,14 +525,14 @@ void jbd2_journal_write_revoke_records(journal_t *journal, hash_list->next; write_one_revoke_record(journal, transaction, &descriptor, &offset, - record); + record, write_op); count++; list_del(&record->hash); kmem_cache_free(jbd2_revoke_record_cache, record); } } if (descriptor) - flush_descriptor(journal, descriptor, offset); + flush_descriptor(journal, descriptor, offset, write_op); jbd_debug(1, "Wrote %d revoke records\n", count); } @@ -543,7 +545,8 @@ static void write_one_revoke_record(journal_t *journal, transaction_t *transaction, struct journal_head **descriptorp, int *offsetp, - struct jbd2_revoke_record_s *record) + struct jbd2_revoke_record_s *record, + int write_op) { struct journal_head *descriptor; int offset; @@ -562,7 +565,7 @@ static void write_one_revoke_record(journal_t *journal, /* Make sure we have a descriptor with space left for the record */ if (descriptor) { if (offset == journal->j_blocksize) { - flush_descriptor(journal, descriptor, offset); + flush_descriptor(journal, descriptor, offset, write_op); descriptor = NULL; } } @@ -607,7 +610,7 @@ static void write_one_revoke_record(journal_t *journal, static void flush_descriptor(journal_t *journal, struct journal_head *descriptor, - int offset) + int offset, int write_op) { jbd2_journal_revoke_header_t *header; struct buffer_head *bh = jh2bh(descriptor); @@ -622,7 +625,7 @@ static void flush_descriptor(journal_t *journal, set_buffer_jwrite(bh); BUFFER_TRACE(bh, "write"); set_buffer_dirty(bh); - ll_rw_block(SWRITE, 1, &bh); + ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh); } #endif diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 8815a34..cc02393 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1193,7 +1193,8 @@ extern int jbd2_journal_init_revoke_caches(void); extern void jbd2_journal_destroy_revoke(journal_t *); extern int jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *); extern int jbd2_journal_cancel_revoke(handle_t *, struct journal_head *); -extern void jbd2_journal_write_revoke_records(journal_t *, transaction_t *); +extern void jbd2_journal_write_revoke_records(journal_t *, + transaction_t *, int); /* Recovery revoke support */ extern int jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t); -- cgit v0.10.2 From 6ec3cfeca04622e3d80c9270191cd7f5f88214af Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Mon, 13 Apr 2009 15:20:58 -0700 Subject: x86, irq: Remove IRQ_DISABLED check in process context IRQ move As discussed in the thread here: http://marc.info/?l=linux-kernel&m=123964468521142&w=2 Eric W. Biederman observed: > It looks like some additional bugs have slipped in since last I looked. > > set_irq_affinity does this: > ifdef CONFIG_GENERIC_PENDING_IRQ > if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) { > cpumask_copy(desc->affinity, cpumask); > desc->chip->set_affinity(irq, cpumask); > } else { > desc->status |= IRQ_MOVE_PENDING; > cpumask_copy(desc->pending_mask, cpumask); > } > #else > > That IRQ_DISABLED case is a software state and as such it has nothing to > do with how safe it is to move an irq in process context. [...] > > The only reason we migrate MSIs in interrupt context today is that there > wasn't infrastructure for support migration both in interrupt context > and outside of it. Yes. The idea here was to force the MSI migration to happen in process context. One of the patches in the series did disable_irq(dev->irq); irq_set_affinity(dev->irq, cpumask_of(dev->cpu)); enable_irq(dev->irq); with the above patch adding irq/manage code check for interrupt disabled and moving the interrupt in process context. IIRC, there was no IRQ_MOVE_PCNTXT when we were developing this HPET code and we ended up having this ugly hack. IRQ_MOVE_PCNTXT was there when we eventually submitted the patch upstream. But, looks like I did a blind rebasing instead of using IRQ_MOVE_PCNTXT in hpet MSI code. Below patch fixes this. i.e., revert commit 932775a4ab622e3c99bd59f14cc and add PCNTXT to HPET MSI setup. Also removes copying of desc->affinity in generic code as set_affinity routines are doing it internally. Reported-by: "Eric W. Biederman" Signed-off-by: Venkatesh Pallipadi Acked-by: "Eric W. Biederman" Cc: "Li Shaohua" Cc: Gary Hade Cc: "lcm@us.ibm.com" Cc: suresh.b.siddha@intel.com LKML-Reference: <20090413222058.GB8211@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a2789e4..30da617 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3670,12 +3670,14 @@ int arch_setup_hpet_msi(unsigned int irq) { int ret; struct msi_msg msg; + struct irq_desc *desc = irq_to_desc(irq); ret = msi_compose_msg(NULL, irq, &msg); if (ret < 0) return ret; hpet_msi_write(irq, &msg); + desc->status |= IRQ_MOVE_PCNTXT; set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq, "edge"); diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 7e2e7dd..2734eca 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -109,10 +109,9 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask) spin_lock_irqsave(&desc->lock, flags); #ifdef CONFIG_GENERIC_PENDING_IRQ - if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) { - cpumask_copy(desc->affinity, cpumask); + if (desc->status & IRQ_MOVE_PCNTXT) desc->chip->set_affinity(irq, cpumask); - } else { + else { desc->status |= IRQ_MOVE_PENDING; cpumask_copy(desc->pending_mask, cpumask); } -- cgit v0.10.2 From 25097bf153391f7be4c591d47061b3dc4990dac2 Mon Sep 17 00:00:00 2001 From: Christian Ehrhardt Date: Tue, 14 Apr 2009 15:36:16 +0200 Subject: [S390] s390: move machine flags to lowcore Currently the storage of the machine flags is a globally exported unsigned long long variable. By moving the storage location into the lowcore struct we allow assembler code to check machine_flags directly even without needing a register. Addtionally the lowcore and therefore the machine flags too will be in cache most of the time. Signed-off-by: Christian Ehrhardt Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/cpuid.h b/arch/s390/include/asm/cpuid.h new file mode 100644 index 0000000..07836a2 --- /dev/null +++ b/arch/s390/include/asm/cpuid.h @@ -0,0 +1,25 @@ +/* + * Copyright IBM Corp. 2000,2009 + * Author(s): Hartmut Penner , + * Martin Schwidefsky + * Christian Ehrhardt + */ + +#ifndef _ASM_S390_CPUID_H_ +#define _ASM_S390_CPUID_H_ + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * Members of this structure are referenced in head.S, so think twice + * before touching them. [mj] + */ + +typedef struct +{ + unsigned int version : 8; + unsigned int ident : 24; + unsigned int machine : 16; + unsigned int unused : 16; +} __attribute__ ((packed)) cpuid_t; + +#endif /* _ASM_S390_CPUID_H_ */ diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index c6e674f..54ea39f 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -15,6 +15,7 @@ #define ASM_KVM_HOST_H #include #include +#include #define KVM_MAX_VCPUS 64 #define KVM_MEMORY_SLOTS 32 diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index b349f1c..3aeca49 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -66,6 +66,7 @@ #define __LC_USER_EXEC_ASCE 0x02ac #define __LC_CPUID 0x02b0 #define __LC_INT_CLOCK 0x02c8 +#define __LC_MACHINE_FLAGS 0x02d8 #define __LC_IRB 0x0300 #define __LC_PFAULT_INTPARM 0x0080 #define __LC_CPU_TIMER_SAVE_AREA 0x00d8 @@ -110,6 +111,7 @@ #define __LC_CPUID 0x0320 #define __LC_INT_CLOCK 0x0340 #define __LC_VDSO_PER_CPU 0x0350 +#define __LC_MACHINE_FLAGS 0x0358 #define __LC_IRB 0x0380 #define __LC_PASTE 0x03c0 #define __LC_PFAULT_INTPARM 0x11b8 @@ -127,9 +129,9 @@ #ifndef __ASSEMBLY__ -#include +#include +#include #include -#include void restart_int_handler(void); void ext_int_handler(void); @@ -277,7 +279,8 @@ struct _lowcore __u32 ext_call_fast; /* 0x02c4 */ __u64 int_clock; /* 0x02c8 */ __u64 clock_comparator; /* 0x02d0 */ - __u8 pad_0x02d8[0x0300-0x02d8]; /* 0x02d8 */ + __u32 machine_flags; /* 0x02d8 */ + __u8 pad_0x02dc[0x0300-0x02dc]; /* 0x02dc */ /* Interrupt response block */ __u8 irb[64]; /* 0x0300 */ @@ -381,7 +384,8 @@ struct _lowcore __u64 int_clock; /* 0x0340 */ __u64 clock_comparator; /* 0x0348 */ __u64 vdso_per_cpu_data; /* 0x0350 */ - __u8 pad_0x0358[0x0380-0x0358]; /* 0x0358 */ + __u64 machine_flags; /* 0x0358 */ + __u8 pad_0x0360[0x0380-0x0360]; /* 0x0360 */ /* Interrupt response block. */ __u8 irb[64]; /* 0x0380 */ diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index 61862b3..c139fa7 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -14,7 +14,10 @@ #define __ASM_S390_PROCESSOR_H #include +#include +#include #include +#include #ifdef __KERNEL__ /* @@ -23,20 +26,6 @@ */ #define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; }) -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * Members of this structure are referenced in head.S, so think twice - * before touching them. [mj] - */ - -typedef struct -{ - unsigned int version : 8; - unsigned int ident : 24; - unsigned int machine : 16; - unsigned int unused : 16; -} __attribute__ ((packed)) cpuid_t; - static inline void get_cpu_id(cpuid_t *ptr) { asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr)); diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index f1b0516..539263f 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -313,8 +313,6 @@ typedef struct #ifdef __KERNEL__ -#include -#include /* * The pt_regs struct defines the way the registers are stored on diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index e8bd6ac..38b0fc2 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -14,6 +14,7 @@ #ifdef __KERNEL__ +#include #include #define PARMAREA 0x10400 @@ -63,7 +64,6 @@ extern unsigned int s390_noexec; /* * Machine features detected in head.S */ -extern unsigned long machine_flags; #define MACHINE_FLAG_VM (1UL << 0) #define MACHINE_FLAG_IEEE (1UL << 1) @@ -77,28 +77,28 @@ extern unsigned long machine_flags; #define MACHINE_FLAG_HPAGE (1UL << 10) #define MACHINE_FLAG_PFMF (1UL << 11) -#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM) -#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM) -#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C) +#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM) +#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM) +#define MACHINE_HAS_DIAG9C (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C) #ifndef __s390x__ -#define MACHINE_HAS_IEEE (machine_flags & MACHINE_FLAG_IEEE) -#define MACHINE_HAS_CSP (machine_flags & MACHINE_FLAG_CSP) +#define MACHINE_HAS_IEEE (S390_lowcore.machine_flags & MACHINE_FLAG_IEEE) +#define MACHINE_HAS_CSP (S390_lowcore.machine_flags & MACHINE_FLAG_CSP) #define MACHINE_HAS_IDTE (0) #define MACHINE_HAS_DIAG44 (1) -#define MACHINE_HAS_MVPG (machine_flags & MACHINE_FLAG_MVPG) +#define MACHINE_HAS_MVPG (S390_lowcore.machine_flags & MACHINE_FLAG_MVPG) #define MACHINE_HAS_MVCOS (0) #define MACHINE_HAS_HPAGE (0) #define MACHINE_HAS_PFMF (0) #else /* __s390x__ */ #define MACHINE_HAS_IEEE (1) #define MACHINE_HAS_CSP (1) -#define MACHINE_HAS_IDTE (machine_flags & MACHINE_FLAG_IDTE) -#define MACHINE_HAS_DIAG44 (machine_flags & MACHINE_FLAG_DIAG44) +#define MACHINE_HAS_IDTE (S390_lowcore.machine_flags & MACHINE_FLAG_IDTE) +#define MACHINE_HAS_DIAG44 (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44) #define MACHINE_HAS_MVPG (1) -#define MACHINE_HAS_MVCOS (machine_flags & MACHINE_FLAG_MVCOS) -#define MACHINE_HAS_HPAGE (machine_flags & MACHINE_FLAG_HPAGE) -#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF) +#define MACHINE_HAS_MVCOS (S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS) +#define MACHINE_HAS_HPAGE (S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE) +#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF) #endif /* __s390x__ */ #define ZFCPDUMP_HSA_SIZE (32UL<<20) diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index c544aa5..461f2ab 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -31,8 +31,9 @@ #define ASYNC_SIZE (PAGE_SIZE << ASYNC_ORDER) #ifndef __ASSEMBLY__ -#include #include +#include +#include /* * low level task data that entry.S needs immediate access to diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 4d221c8..d4e1e5b 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -34,6 +34,8 @@ char kernel_nss_name[NSS_NAME_SIZE + 1]; +static unsigned long machine_flags; + static void __init setup_boot_command_line(void); @@ -391,5 +393,6 @@ void __init startup_init(void) setup_hpage(); sclp_facilities_detect(); detect_memory_layout(memory_chunk); + S390_lowcore.machine_flags = machine_flags; lockdep_on(); } diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 06201b9..163bdfe 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -82,9 +82,6 @@ EXPORT_SYMBOL(console_devno); unsigned int console_irq = -1; EXPORT_SYMBOL(console_irq); -unsigned long machine_flags; -EXPORT_SYMBOL(machine_flags); - unsigned long elf_hwcap = 0; char elf_platform[ELF_PLATFORM_SIZE]; @@ -426,6 +423,7 @@ setup_lowcore(void) __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE; lc->current_task = (unsigned long) init_thread_union.thread_info.task; lc->thread_info = (unsigned long) &init_thread_union; + lc->machine_flags = S390_lowcore.machine_flags; #ifndef CONFIG_64BIT if (MACHINE_HAS_IEEE) { lc->extended_save_area_addr = (__u32) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 006ed50..7966302 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -571,6 +571,7 @@ int __cpuinit __cpu_up(unsigned int cpu) cpu_lowcore->current_task = (unsigned long) idle; cpu_lowcore->cpu_nr = cpu; cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce; + cpu_lowcore->machine_flags = S390_lowcore.machine_flags; eieio(); while (signal_processor(cpu, sigp_restart) == sigp_busy) -- cgit v0.10.2 From a93e11f9b9604134373ae790bce738d62109de60 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 14 Apr 2009 15:36:17 +0200 Subject: [S390] wire up preadv/pwritev system calls Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index c8ad350..f0f19e6 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -265,7 +265,9 @@ #define __NR_pipe2 325 #define __NR_dup3 326 #define __NR_epoll_create1 327 -#define NR_syscalls 328 +#define __NR_preadv 328 +#define __NR_pwritev 329 +#define NR_syscalls 330 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 87cf5a7..fb38af6 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1805,3 +1805,21 @@ compat_sys_keyctl_wrapper: llgfr %r5,%r5 # u32 llgfr %r6,%r6 # u32 jg compat_sys_keyctl # branch to system call + + .globl compat_sys_preadv_wrapper +compat_sys_preadv_wrapper: + llgfr %r2,%r2 # unsigned long + llgtr %r3,%r3 # compat_iovec * + llgfr %r4,%r4 # unsigned long + llgfr %r5,%r5 # u32 + llgfr %r6,%r6 # u32 + jg compat_sys_preadv # branch to system call + + .globl compat_sys_pwritev_wrapper +compat_sys_pwritev_wrapper: + llgfr %r2,%r2 # unsigned long + llgtr %r3,%r3 # compat_iovec * + llgfr %r4,%r4 # unsigned long + llgfr %r5,%r5 # u32 + llgfr %r6,%r6 # u32 + jg compat_sys_pwritev # branch to system call diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index fe5b25a..2c7739f 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -336,3 +336,5 @@ SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper) SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */ SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper) SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper) +SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper) +SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper) -- cgit v0.10.2 From 81f64b87731aa33eef6b88af9d92c3398d48cf41 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 14 Apr 2009 15:36:18 +0200 Subject: [S390] call nmi_enter/nmi_exit on machine checks nmi_enter/nmi_exit includes the lockdep calls and various other calls which were missing so far. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c index 4bfdc42..28cf196 100644 --- a/arch/s390/kernel/nmi.c +++ b/arch/s390/kernel/nmi.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include @@ -253,7 +254,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs) struct mci *mci; int umode; - lockdep_off(); + nmi_enter(); s390_idle_check(); mci = (struct mci *) &S390_lowcore.mcck_interruption_code; @@ -363,7 +364,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs) mcck->warning = 1; set_thread_flag(TIF_MCCK_PENDING); } - lockdep_on(); + nmi_exit(); } static int __init machine_check_init(void) -- cgit v0.10.2 From 0436230148c55e3afbe5c57775a1fb44ba4834ac Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 14 Apr 2009 15:36:19 +0200 Subject: [S390] stp synchronization retry timer Add a timer that retries the clock synchronization via the server time protocol if there is a usable clock but the synchronization failed. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index f72d410..05f93e7 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -1423,6 +1423,7 @@ static void *stp_page; static void stp_work_fn(struct work_struct *work); static DEFINE_MUTEX(stp_work_mutex); static DECLARE_WORK(stp_work, stp_work_fn); +static struct timer_list stp_timer; static int __init early_parse_stp(char *p) { @@ -1454,10 +1455,16 @@ static void __init stp_reset(void) } } +static void stp_timeout(unsigned long dummy) +{ + queue_work(time_sync_wq, &stp_work); +} + static int __init stp_init(void) { if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags)) return 0; + setup_timer(&stp_timer, stp_timeout, 0UL); time_init_wq(); if (!stp_online) return 0; @@ -1565,6 +1572,7 @@ static void stp_work_fn(struct work_struct *work) if (!stp_online) { chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000); + del_timer_sync(&stp_timer); goto out_unlock; } @@ -1586,6 +1594,13 @@ static void stp_work_fn(struct work_struct *work) stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map); put_online_cpus(); + if (!check_sync_clock()) + /* + * There is a usable clock but the synchonization failed. + * Retry after a second. + */ + mod_timer(&stp_timer, jiffies + HZ); + out_unlock: mutex_unlock(&stp_work_mutex); } -- cgit v0.10.2 From b6ecfa9273e27b5c7ba04655eb44f78bf4db5b64 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Tue, 14 Apr 2009 15:36:20 +0200 Subject: [S390] extend virtual timer interface by mod_virt_timer_periodic In case mod_virt_timer is used to add a non pending timer the timer is always added as a one-shot timer. If mod_virt_timer is used for periodic timers they may therfore be degraded to one-shot timers. Add mod_virt_timer_periodic to the interface to allow safe re-programming of the interval value. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/timer.h b/arch/s390/include/asm/timer.h index e4bcab7..814243c 100644 --- a/arch/s390/include/asm/timer.h +++ b/arch/s390/include/asm/timer.h @@ -41,6 +41,7 @@ extern void init_virt_timer(struct vtimer_list *timer); extern void add_virt_timer(void *new); extern void add_virt_timer_periodic(void *new); extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires); +extern int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires); extern int del_virt_timer(struct vtimer_list *timer); extern void init_cpu_vtimer(void); diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index ecf0304..694b443 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -425,17 +425,7 @@ void add_virt_timer_periodic(void *new) } EXPORT_SYMBOL(add_virt_timer_periodic); -/* - * If we change a pending timer the function must be called on the CPU - * where the timer is running on, e.g. by smp_call_function_single() - * - * The original mod_timer adds the timer if it is not pending. For - * compatibility we do the same. The timer will be added on the current - * CPU as a oneshot timer. - * - * returns whether it has modified a pending timer (1) or not (0) - */ -int mod_virt_timer(struct vtimer_list *timer, __u64 expires) +int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic) { struct vtimer_queue *vq; unsigned long flags; @@ -444,39 +434,35 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires) BUG_ON(!timer->function); BUG_ON(!expires || expires > VTIMER_MAX_SLICE); - /* - * This is a common optimization triggered by the - * networking code - if the timer is re-modified - * to be the same thing then just return: - */ if (timer->expires == expires && vtimer_pending(timer)) return 1; cpu = get_cpu(); vq = &per_cpu(virt_cpu_timer, cpu); - /* check if we run on the right CPU */ - BUG_ON(timer->cpu != cpu); - /* disable interrupts before test if timer is pending */ spin_lock_irqsave(&vq->lock, flags); /* if timer isn't pending add it on the current CPU */ if (!vtimer_pending(timer)) { spin_unlock_irqrestore(&vq->lock, flags); - /* we do not activate an interval timer with mod_virt_timer */ - timer->interval = 0; + + if (periodic) + timer->interval = expires; + else + timer->interval = 0; timer->expires = expires; timer->cpu = cpu; internal_add_vtimer(timer); return 0; } + /* check if we run on the right CPU */ + BUG_ON(timer->cpu != cpu); + list_del_init(&timer->entry); timer->expires = expires; - - /* also change the interval if we have an interval timer */ - if (timer->interval) + if (periodic) timer->interval = expires; /* the timer can't expire anymore so we can release the lock */ @@ -484,9 +470,32 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires) internal_add_vtimer(timer); return 1; } + +/* + * If we change a pending timer the function must be called on the CPU + * where the timer is running on. + * + * returns whether it has modified a pending timer (1) or not (0) + */ +int mod_virt_timer(struct vtimer_list *timer, __u64 expires) +{ + return __mod_vtimer(timer, expires, 0); +} EXPORT_SYMBOL(mod_virt_timer); /* + * If we change a pending timer the function must be called on the CPU + * where the timer is running on. + * + * returns whether it has modified a pending timer (1) or not (0) + */ +int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires) +{ + return __mod_vtimer(timer, expires, 1); +} +EXPORT_SYMBOL(mod_virt_timer_periodic); + +/* * delete a virtual timer * * returns whether the deleted timer was pending (1) or not (0) -- cgit v0.10.2 From 43ae8a1b32735c662ba7ebf3509c4f670f75e3d5 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Tue, 14 Apr 2009 15:36:21 +0200 Subject: [S390] appldata: Use new mod_virt_timer_periodic() function. mod_virt_timer() was used to modify/add cpu timers for cpus that were set online. This resulted in a one-shot timer for every cpu that was newly added or previously set offline, instead of an interval timer, which broke the appldata vtime interval setup. To fix this, the new mod_virt_timer_periodic() function is used, which adds interval timers instead of one-shot timers. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 27b70d8..aeb3cff 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -176,7 +176,7 @@ static void __appldata_mod_vtimer_wrap(void *p) { struct vtimer_list *timer; u64 expires; } *args = p; - mod_virt_timer(args->timer, args->expires); + mod_virt_timer_periodic(args->timer, args->expires); } #define APPLDATA_ADD_TIMER 0 -- cgit v0.10.2 From 75cb71f3184f3dd5b78d991d5e0e047774865f5d Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Tue, 14 Apr 2009 15:36:22 +0200 Subject: [S390] qdio: remove dead timeout handler The QDIO ccw devices are started by ccw_device_start so no timeout can occur for the interrupt handler. Remove the dead code. In case of an I/O error set the device state to error and wake up a possibly running qdio_shutdown waiter. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 9e8a291..accd957 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -881,42 +881,6 @@ no_handler: qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); } -static void qdio_call_shutdown(struct work_struct *work) -{ - struct ccw_device_private *priv; - struct ccw_device *cdev; - - priv = container_of(work, struct ccw_device_private, kick_work); - cdev = priv->cdev; - qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); - put_device(&cdev->dev); -} - -static void qdio_int_error(struct ccw_device *cdev) -{ - struct qdio_irq *irq_ptr = cdev->private->qdio_data; - - switch (irq_ptr->state) { - case QDIO_IRQ_STATE_INACTIVE: - case QDIO_IRQ_STATE_CLEANUP: - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); - break; - case QDIO_IRQ_STATE_ESTABLISHED: - case QDIO_IRQ_STATE_ACTIVE: - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); - if (get_device(&cdev->dev)) { - /* Can't call shutdown from interrupt context. */ - PREPARE_WORK(&cdev->private->kick_work, - qdio_call_shutdown); - queue_work(ccw_device_work, &cdev->private->kick_work); - } - break; - default: - WARN_ON(1); - } - wake_up(&cdev->private->wait_q); -} - static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat, int dstat) { @@ -973,10 +937,8 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, switch (PTR_ERR(irb)) { case -EIO: DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no); - return; - case -ETIMEDOUT: - DBF_ERROR("%4x IO timeout", irq_ptr->schid.sch_no); - qdio_int_error(cdev); + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); + wake_up(&cdev->private->wait_q); return; default: WARN_ON(1); @@ -1001,7 +963,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, case QDIO_IRQ_STATE_ACTIVE: if (cstat & SCHN_STAT_PCI) { qdio_int_handler_pci(irq_ptr); - /* no state change so no need to wake up wait_q */ return; } if ((cstat & ~SCHN_STAT_PCI) || dstat) { -- cgit v0.10.2 From f3445a1a656bc26b07946cc6d20de1ef07c8d116 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 14 Apr 2009 15:36:23 +0200 Subject: [S390] dasd: Use the new async framework for autoonlining. The dasd driver can automatically online detected dasds, which especially important for finding the root device. Currently, it will wait for each online operation to finish individually, which may take long if many dasds need to be onlined. When using the new async framework, these onlining operations can run in parallel and presence of the root device is ensured by the fact that prepare_namespace() waits for all async threads to finish. Signed-off-by: Cornelia Huck Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 0570794..d181527 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -480,8 +481,10 @@ static void dasd_change_state(struct dasd_device *device) if (rc && rc != -EAGAIN) device->target = device->state; - if (device->state == device->target) + if (device->state == device->target) { wake_up(&dasd_init_waitq); + dasd_put_device(device); + } /* let user-space know that the device status changed */ kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE); @@ -513,12 +516,15 @@ void dasd_kick_device(struct dasd_device *device) */ void dasd_set_target_state(struct dasd_device *device, int target) { + dasd_get_device(device); /* If we are in probeonly mode stop at DASD_STATE_READY. */ if (dasd_probeonly && target > DASD_STATE_READY) target = DASD_STATE_READY; if (device->target != target) { - if (device->state == target) + if (device->state == target) { wake_up(&dasd_init_waitq); + dasd_put_device(device); + } device->target = target; } if (device->state != device->target) @@ -2148,6 +2154,22 @@ dasd_exit(void) * SECTION: common functions for ccw_driver use */ +static void dasd_generic_auto_online(void *data, async_cookie_t cookie) +{ + struct ccw_device *cdev = data; + int ret; + + ret = ccw_device_set_online(cdev); + if (ret) + pr_warning("%s: Setting the DASD online failed with rc=%d\n", + dev_name(&cdev->dev), ret); + else { + struct dasd_device *device = dasd_device_from_cdev(cdev); + wait_event(dasd_init_waitq, _wait_for_device(device)); + dasd_put_device(device); + } +} + /* * Initial attempt at a probe function. this can be simplified once * the other detection code is gone. @@ -2180,10 +2202,7 @@ int dasd_generic_probe(struct ccw_device *cdev, */ if ((dasd_get_feature(cdev, DASD_FEATURE_INITIAL_ONLINE) > 0 ) || (dasd_autodetect && dasd_busid_known(dev_name(&cdev->dev)) != 0)) - ret = ccw_device_set_online(cdev); - if (ret) - pr_warning("%s: Setting the DASD online failed with rc=%d\n", - dev_name(&cdev->dev), ret); + async_schedule(dasd_generic_auto_online, cdev); return 0; } @@ -2290,13 +2309,7 @@ int dasd_generic_set_online(struct ccw_device *cdev, } else pr_debug("dasd_generic device %s found\n", dev_name(&cdev->dev)); - - /* FIXME: we have to wait for the root device but we don't want - * to wait for each single device but for all at once. */ - wait_event(dasd_init_waitq, _wait_for_device(device)); - dasd_put_device(device); - return rc; } -- cgit v0.10.2 From 52db45c3c55a0fca53077dfd7b123e30cd210aad Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Tue, 14 Apr 2009 15:36:24 +0200 Subject: [S390] dasd: fix idaw boundary checking for track based ccw A ccw command that reads or writes several records at once will usually transfer more data then fits into one page and needs to address memory areas using a list of indirect data address words (idaw). All but the first of these areas must start on a 4KB or 2KB block boundary (depending on the idaw format). A check for this restriction was missing and has been added with this patch. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 2125479..cb52da0 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -2019,15 +2019,23 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_track( ccw++; recid += count; new_track = 0; + /* first idaw for a ccw may start anywhere */ + if (!idaw_dst) + idaw_dst = dst; } - /* If we start a new idaw, everything is fine and the - * start of the new idaw is the start of this segment. + /* If we start a new idaw, we must make sure that it + * starts on an IDA_BLOCK_SIZE boundary. * If we continue an idaw, we must make sure that the * current segment begins where the so far accumulated * idaw ends */ - if (!idaw_dst) - idaw_dst = dst; + if (!idaw_dst) { + if (__pa(dst) & (IDA_BLOCK_SIZE-1)) { + dasd_sfree_request(cqr, startdev); + return ERR_PTR(-ERANGE); + } else + idaw_dst = dst; + } if ((idaw_dst + idaw_len) != dst) { dasd_sfree_request(cqr, startdev); return ERR_PTR(-ERANGE); -- cgit v0.10.2 From 88e012856d05a5d00ae80c691fb7aa5adda268d7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 14 Apr 2009 15:36:25 +0200 Subject: [S390] smp: fix cpu_possible_map initialization The cpu_possible_map by default is initialized with all ones in s390. If the kernel paramert possible_cpus= is passed the cpu_possible_map is supposed to have x bits set. However the current code just sets the x bits without clearing the NR_CPUS bits that were already set. So we end up with an unchanged map that has all bits set. To fix this just clear the map before setting any new bits. This broke with def6cfb70bab83c0094bc0cedd27c4eda563043e "[S390] cpumask: Use accessors code." Cc: Rusty Russell Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 7966302..a985a3b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -591,7 +591,8 @@ static int __init setup_possible_cpus(char *s) int pcpus, cpu; pcpus = simple_strtoul(s, NULL, 0); - for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++) + init_cpu_possible(cpumask_of(0)); + for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++) set_cpu_possible(cpu, true); return 0; } -- cgit v0.10.2 From b86ccca49cd8f22086c1d135ab3051cf48fb1688 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 14 Apr 2009 15:36:26 +0200 Subject: [S390] fix idle time accounting The steal time is calculated by subtracting the time the virtual cpu has been running on a physical cpu from the wall clock time. To make that work all wall time needs to be added to the steal time field first before the virtual cpu time is subtracted. The time between the last clock update and the load of the enabled wait psw needs to be added to the steal_time field as well to make the sum over all cpu accounting numbers match the wall clock. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 694b443..c0870a6 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -134,6 +134,8 @@ void vtime_start_cpu(void) /* Account time spent with enabled wait psw loaded as idle time. */ idle_time = S390_lowcore.int_clock - idle->idle_enter; account_idle_time(idle_time); + S390_lowcore.steal_timer += + idle->idle_enter - S390_lowcore.last_update_clock; S390_lowcore.last_update_clock = S390_lowcore.int_clock; /* Account system time spent going idle. */ -- cgit v0.10.2 From 5b409ed17bb32c8316b1f456466c70529454573a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 14 Apr 2009 15:36:27 +0200 Subject: [S390] cpu hotplug and accounting values Reset the cpu timer to the maximum value and correctly initialize the cpu accounting values in the lowcore when the cpu is started. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 67a6001..fa9905c 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -27,6 +27,8 @@ int main(void) DEFINE(__TI_flags, offsetof(struct thread_info, flags)); DEFINE(__TI_cpu, offsetof(struct thread_info, cpu)); DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count)); + DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer)); + DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer)); BLANK(); DEFINE(__PT_ARGS, offsetof(struct pt_regs, args)); DEFINE(__PT_PSW, offsetof(struct pt_regs, psw)); diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 1268aa2..f3e2759 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -837,16 +837,29 @@ mcck_return: __CPUINIT .globl restart_int_handler restart_int_handler: + basr %r1,0 +restart_base: + spt restart_vtime-restart_base(%r1) + stck __LC_LAST_UPDATE_CLOCK + mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1) + mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1) l %r15,__LC_SAVE_AREA+60 # load ksp lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs lam %a0,%a15,__LC_AREGS_SAVE_AREA lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone + l %r1,__LC_THREAD_INFO + mvc __LC_USER_TIMER(8),__TI_user_timer(%r1) + mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) + xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on basr %r14,0 l %r14,restart_addr-.(%r14) br %r14 # branch to start_secondary restart_addr: .long start_secondary + .align 8 +restart_vtime: + .long 0x7fffffff,0xffffffff .previous #else /* diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index c6fbde1..84a1058 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -831,14 +831,27 @@ mcck_return: __CPUINIT .globl restart_int_handler restart_int_handler: + basr %r1,0 +restart_base: + spt restart_vtime-restart_base(%r1) + stck __LC_LAST_UPDATE_CLOCK + mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1) + mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1) lg %r15,__LC_SAVE_AREA+120 # load ksp lghi %r10,__LC_CREGS_SAVE_AREA lctlg %c0,%c15,0(%r10) # get new ctl regs lghi %r10,__LC_AREGS_SAVE_AREA lam %a0,%a15,0(%r10) lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone + lg %r1,__LC_THREAD_INFO + mvc __LC_USER_TIMER(8),__TI_user_timer(%r1) + mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) + xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on jg start_secondary + .align 8 +restart_vtime: + .long 0x7fffffff,0xffffffff .previous #else /* -- cgit v0.10.2 From b6112ccbff5ec580d46b584ecc3c3a773b830da2 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 14 Apr 2009 15:36:28 +0200 Subject: [S390] add read_persistent_clock Add a read_persistent_clock function that does not just return 0. Since timekeeping_init calls the function before time_init has been called move reset_tod_clock to early.c to make sure that the TOD clock is running when read_persistent_clock is invoked. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h index d744c3d..cc21e3e 100644 --- a/arch/s390/include/asm/timex.h +++ b/arch/s390/include/asm/timex.h @@ -11,6 +11,9 @@ #ifndef _ASM_S390_TIMEX_H #define _ASM_S390_TIMEX_H +/* The value of the TOD clock for 1.1.1970. */ +#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL + /* Inline functions for clock register access. */ static inline int set_clock(__u64 time) { @@ -85,4 +88,6 @@ int get_sync_clock(unsigned long long *clock); void init_cpu_timer(void); unsigned long long monotonic_clock(void); +extern u64 sched_clock_base_cc; + #endif diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index d4e1e5b..cf09948 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -38,6 +38,21 @@ static unsigned long machine_flags; static void __init setup_boot_command_line(void); +/* + * Get the TOD clock running. + */ +static void __init reset_tod_clock(void) +{ + u64 time; + + if (store_clock(&time) == 0) + return; + /* TOD clock not running. Set the clock to Unix Epoch. */ + if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0) + disabled_wait(0); + + sched_clock_base_cc = TOD_UNIX_EPOCH; +} #ifdef CONFIG_SHARED_KERNEL int __init savesys_ipl_nss(char *cmd, const int cmdlen); @@ -372,6 +387,7 @@ static void __init setup_boot_command_line(void) */ void __init startup_init(void) { + reset_tod_clock(); ipl_save_parameters(); rescue_initrd(); clear_bss_section(); diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 1046c2c..16f8975 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -471,6 +471,8 @@ startup:basr %r13,0 # get base .LPG0: xc 0x200(256),0x200 # partially clear lowcore xc 0x300(256),0x300 + l %r1,5f-.LPG0(%r13) + stck 0(%r1) #ifndef CONFIG_MARCH_G5 # check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10} @@ -496,9 +498,10 @@ startup:basr %r13,0 # get base brct %r0,0b #endif - l %r13,0f-.LPG0(%r13) + l %r13,4f-.LPG0(%r13) b 0(%r13) -0: .long startup_continue +4: .long startup_continue +5: .long sched_clock_base_cc # # params at 10400 (setup.h) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 05f93e7..369ff02 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -52,9 +52,6 @@ #define USECS_PER_JIFFY ((unsigned long) 1000000/HZ) #define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12) -/* The value of the TOD clock for 1.1.1970. */ -#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL - /* * Create a small time difference between the timer interrupts * on the different cpus to avoid lock contention. @@ -63,9 +60,10 @@ #define TICK_SIZE tick +u64 sched_clock_base_cc = -1; /* Force to data section. */ + static ext_int_info_t ext_int_info_cc; static ext_int_info_t ext_int_etr_cc; -static u64 sched_clock_base_cc; static DEFINE_PER_CPU(struct clock_event_device, comparators); @@ -195,22 +193,12 @@ static void timing_alert_interrupt(__u16 code) static void etr_reset(void); static void stp_reset(void); -/* - * Get the TOD clock running. - */ -static u64 __init reset_tod_clock(void) +unsigned long read_persistent_clock(void) { - u64 time; + struct timespec ts; - etr_reset(); - stp_reset(); - if (store_clock(&time) == 0) - return time; - /* TOD clock not running. Set the clock to Unix Epoch. */ - if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0) - panic("TOD clock not operational."); - - return TOD_UNIX_EPOCH; + tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts); + return ts.tv_sec; } static cycle_t read_tod_clock(void) @@ -265,7 +253,9 @@ void update_vsyscall_tz(void) */ void __init time_init(void) { - sched_clock_base_cc = reset_tod_clock(); + /* Reset time synchronization interfaces. */ + etr_reset(); + stp_reset(); /* set xtime */ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime); -- cgit v0.10.2 From ab96e798cbd562a53edd802272e49a5100b29efb Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 14 Apr 2009 15:36:29 +0200 Subject: [S390] boot cputime accounting Start the cpu time accounting very early to catch the cpu time spent for the initial kernel setup. To make the output of /proc/uptime match the sum of all cpu accounting values of the boot cpu reset xtime and wall_to_monotonic to sane values based on the TOD clock. The values set by timekeeping_init are off by up to a second. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 16f8975..bba1449 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -473,7 +473,10 @@ startup:basr %r13,0 # get base xc 0x300(256),0x300 l %r1,5f-.LPG0(%r13) stck 0(%r1) - + spt 6f-.LPG0(%r13) + mvc __LC_LAST_UPDATE_CLOCK(8),0(%r1) + mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13) + mvc __LC_EXIT_TIMER(8),5f-.LPG0(%r13) #ifndef CONFIG_MARCH_G5 # check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10} stidp __LC_CPUID # store cpuid @@ -500,8 +503,11 @@ startup:basr %r13,0 # get base l %r13,4f-.LPG0(%r13) b 0(%r13) + .align 4 4: .long startup_continue 5: .long sched_clock_base_cc + .align 8 +6: .long 0x7fffffff,0xffffffff # # params at 10400 (setup.h) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 163bdfe..7402b6a 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -434,6 +434,14 @@ setup_lowcore(void) #else lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0]; #endif + lc->sync_enter_timer = S390_lowcore.sync_enter_timer; + lc->async_enter_timer = S390_lowcore.async_enter_timer; + lc->exit_timer = S390_lowcore.exit_timer; + lc->user_timer = S390_lowcore.user_timer; + lc->system_timer = S390_lowcore.system_timer; + lc->steal_timer = S390_lowcore.steal_timer; + lc->last_update_timer = S390_lowcore.last_update_timer; + lc->last_update_clock = S390_lowcore.last_update_clock; set_prefix((u32)(unsigned long) lc); lowcore_ptr[0] = lc; } diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 369ff02..6ded50d 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -253,32 +253,52 @@ void update_vsyscall_tz(void) */ void __init time_init(void) { + struct timespec ts; + unsigned long flags; + cycle_t now; + /* Reset time synchronization interfaces. */ etr_reset(); stp_reset(); - /* set xtime */ - tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); - /* request the clock comparator external interrupt */ if (register_early_external_interrupt(0x1004, clock_comparator_interrupt, &ext_int_info_cc) != 0) panic("Couldn't request external interrupt 0x1004"); - if (clocksource_register(&clocksource_tod) != 0) - panic("Could not register TOD clock source"); - /* request the timing alert external interrupt */ if (register_early_external_interrupt(0x1406, timing_alert_interrupt, &ext_int_etr_cc) != 0) panic("Couldn't request external interrupt 0x1406"); + if (clocksource_register(&clocksource_tod) != 0) + panic("Could not register TOD clock source"); + + /* + * The TOD clock is an accurate clock. The xtime should be + * initialized in a way that the difference between TOD and + * xtime is reasonably small. Too bad that timekeeping_init + * sets xtime.tv_nsec to zero. In addition the clock source + * change from the jiffies clock source to the TOD clock + * source add another error of up to 1/HZ second. The same + * function sets wall_to_monotonic to a value that is too + * small for /proc/uptime to be accurate. + * Reset xtime and wall_to_monotonic to sane values. + */ + write_seqlock_irqsave(&xtime_lock, flags); + now = get_clock(); + tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime); + clocksource_tod.cycle_last = now; + clocksource_tod.raw_time = xtime; + tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts); + set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec); + write_sequnlock_irqrestore(&xtime_lock, flags); + /* Enable TOD clock interrupts on the boot cpu. */ init_cpu_timer(); + /* Enable cpu timer interrupts on the boot cpu. */ vtime_init(); } diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index c0870a6..38ea92f 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -527,16 +527,8 @@ EXPORT_SYMBOL(del_virt_timer); */ void init_cpu_vtimer(void) { - struct thread_info *ti = current_thread_info(); struct vtimer_queue *vq; - S390_lowcore.user_timer = ti->user_timer; - S390_lowcore.system_timer = ti->system_timer; - - /* kick the virtual timer */ - asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock)); - asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer)); - /* initialize per cpu vtimer structure */ vq = &__get_cpu_var(virt_cpu_timer); INIT_LIST_HEAD(&vq->list); -- cgit v0.10.2 From 38d726d153cfe5efe5fe22d28d36ab382dda3a5c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 14 Apr 2009 10:10:47 -0400 Subject: jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records The revoke records must be written using the same way as the rest of the blocks during the commit process; that is, either marked as synchronous writes or as asynchornous writes. Signed-off-by: "Theodore Ts'o" diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index a8e8513..06560c5 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -502,7 +502,7 @@ void journal_commit_transaction(journal_t *journal) err = 0; } - journal_write_revoke_records(journal, commit_transaction); + journal_write_revoke_records(journal, commit_transaction, write_op); /* * If we found any dirty or locked buffers, then we should have diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c index c7bd649..1b1a06e 100644 --- a/fs/jbd/revoke.c +++ b/fs/jbd/revoke.c @@ -67,6 +67,7 @@ #include #include #include +#include #endif #include @@ -99,8 +100,8 @@ struct jbd_revoke_table_s #ifdef __KERNEL__ static void write_one_revoke_record(journal_t *, transaction_t *, struct journal_head **, int *, - struct jbd_revoke_record_s *); -static void flush_descriptor(journal_t *, struct journal_head *, int); + struct jbd_revoke_record_s *, int); +static void flush_descriptor(journal_t *, struct journal_head *, int, int); #endif /* Utility functions to maintain the revoke table */ @@ -486,7 +487,7 @@ void journal_switch_revoke_table(journal_t *journal) */ void journal_write_revoke_records(journal_t *journal, - transaction_t *transaction) + transaction_t *transaction, int write_op) { struct journal_head *descriptor; struct jbd_revoke_record_s *record; @@ -510,14 +511,14 @@ void journal_write_revoke_records(journal_t *journal, hash_list->next; write_one_revoke_record(journal, transaction, &descriptor, &offset, - record); + record, write_op); count++; list_del(&record->hash); kmem_cache_free(revoke_record_cache, record); } } if (descriptor) - flush_descriptor(journal, descriptor, offset); + flush_descriptor(journal, descriptor, offset, write_op); jbd_debug(1, "Wrote %d revoke records\n", count); } @@ -530,7 +531,8 @@ static void write_one_revoke_record(journal_t *journal, transaction_t *transaction, struct journal_head **descriptorp, int *offsetp, - struct jbd_revoke_record_s *record) + struct jbd_revoke_record_s *record, + int write_op) { struct journal_head *descriptor; int offset; @@ -549,7 +551,7 @@ static void write_one_revoke_record(journal_t *journal, /* Make sure we have a descriptor with space left for the record */ if (descriptor) { if (offset == journal->j_blocksize) { - flush_descriptor(journal, descriptor, offset); + flush_descriptor(journal, descriptor, offset, write_op); descriptor = NULL; } } @@ -586,7 +588,7 @@ static void write_one_revoke_record(journal_t *journal, static void flush_descriptor(journal_t *journal, struct journal_head *descriptor, - int offset) + int offset, int write_op) { journal_revoke_header_t *header; struct buffer_head *bh = jh2bh(descriptor); @@ -601,7 +603,7 @@ static void flush_descriptor(journal_t *journal, set_buffer_jwrite(bh); BUFFER_TRACE(bh, "write"); set_buffer_dirty(bh); - ll_rw_block(SWRITE, 1, &bh); + ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh); } #endif diff --git a/include/linux/jbd.h b/include/linux/jbd.h index 53ae439..c2049a0 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -978,7 +978,8 @@ extern void journal_destroy_revoke(journal_t *); extern int journal_revoke (handle_t *, unsigned long, struct buffer_head *); extern int journal_cancel_revoke(handle_t *, struct journal_head *); -extern void journal_write_revoke_records(journal_t *, transaction_t *); +extern void journal_write_revoke_records(journal_t *, + transaction_t *, int); /* Recovery revoke support */ extern int journal_set_revoke(journal_t *, unsigned long, tid_t); -- cgit v0.10.2 From 9d59065cd6fae841ca56c281189d5b8d0817d35f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 Apr 2009 16:13:58 +0200 Subject: ALSA: add private_data to struct snd_jack Added private_data and private_free fields to struct snd_jack so that the caller can assign the data. It'll be helpful for avoiding the double-free of the jack instance. Signed-off-by: Takashi Iwai diff --git a/include/sound/jack.h b/include/sound/jack.h index 6b013c6..f236e42 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -50,6 +50,8 @@ struct snd_jack { int type; const char *id; char name[100]; + void *private_data; + void (*private_free)(struct snd_jack *); }; #ifdef CONFIG_SND_JACK diff --git a/sound/core/jack.c b/sound/core/jack.c index c8254c6..d54d1a0 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -35,6 +35,9 @@ static int snd_jack_dev_free(struct snd_device *device) { struct snd_jack *jack = device->device_data; + if (jack->private_free) + jack->private_free(jack); + /* If the input device is registered with the input subsystem * then we need to use a different deallocator. */ if (jack->registered) -- cgit v0.10.2 From 95c0909961bc5ff18c78b2ab0d093cddc0a8b0b5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 Apr 2009 16:15:29 +0200 Subject: ALSA: hda - Avoid call of snd_jack_report at release Don't call snd_jack_report at release of sigmatel and conexnat codecs which results in Oops at unloading the module. The Oops is triggered by the power-up sequence during the free due to the pincfg restoration. Since the power-up sequence is involved with the unsol handling, the jack reporting may be issued during that. The Oops occurs with this jack reporting because the jack instances have been already released but the codec doesn't do the proper book-keeping. This patch adds the book-keeping of jack instances to avoid the access to bogus pointers. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 1f2ad76..56ce19e 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -350,12 +350,20 @@ static int conexant_mux_enum_put(struct snd_kcontrol *kcontrol, } #ifdef CONFIG_SND_JACK +static void conexant_free_jack_priv(struct snd_jack *jack) +{ + struct conexant_jack *jacks = jack->private_data; + jacks->nid = 0; + jacks->jack = NULL; +} + static int conexant_add_jack(struct hda_codec *codec, hda_nid_t nid, int type) { struct conexant_spec *spec; struct conexant_jack *jack; const char *name; + int err; spec = codec->spec; snd_array_init(&spec->jacks, sizeof(*jack), 32); @@ -368,7 +376,12 @@ static int conexant_add_jack(struct hda_codec *codec, jack->nid = nid; jack->type = type; - return snd_jack_new(codec->bus->card, name, type, &jack->jack); + err = snd_jack_new(codec->bus->card, name, type, &jack->jack); + if (err < 0) + return err; + jack->jack->private_data = jack; + jack->jack->private_free = conexant_free_jack_priv; + return 0; } static void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid) @@ -455,8 +468,10 @@ static void conexant_free(struct hda_codec *codec) if (spec->jacks.list) { struct conexant_jack *jacks = spec->jacks.list; int i; - for (i = 0; i < spec->jacks.used; i++) - snd_device_free(codec->bus->card, &jacks[i].jack); + for (i = 0; i < spec->jacks.used; i++, jacks++) { + if (jacks->jack) + snd_device_free(codec->bus->card, jacks->jack); + } snd_array_free(&spec->jacks); } #endif diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 61996a2..ce30b45 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3851,6 +3851,15 @@ static void stac_gpio_set(struct hda_codec *codec, unsigned int mask, AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */ } +#ifdef CONFIG_SND_JACK +static void stac92xx_free_jack_priv(struct snd_jack *jack) +{ + struct sigmatel_jack *jacks = jack->private_data; + jacks->nid = 0; + jacks->jack = NULL; +} +#endif + static int stac92xx_add_jack(struct hda_codec *codec, hda_nid_t nid, int type) { @@ -3860,6 +3869,7 @@ static int stac92xx_add_jack(struct hda_codec *codec, int def_conf = snd_hda_codec_get_pincfg(codec, nid); int connectivity = get_defcfg_connect(def_conf); char name[32]; + int err; if (connectivity && connectivity != AC_JACK_PORT_FIXED) return 0; @@ -3876,10 +3886,15 @@ static int stac92xx_add_jack(struct hda_codec *codec, snd_hda_get_jack_connectivity(def_conf), snd_hda_get_jack_location(def_conf)); - return snd_jack_new(codec->bus->card, name, type, &jack->jack); -#else - return 0; + err = snd_jack_new(codec->bus->card, name, type, &jack->jack); + if (err < 0) { + jack->nid = 0; + return err; + } + jack->jack->private_data = jack; + jack->jack->private_free = stac92xx_free_jack_priv; #endif + return 0; } static int stac_add_event(struct sigmatel_spec *spec, hda_nid_t nid, @@ -4138,8 +4153,10 @@ static void stac92xx_free_jacks(struct hda_codec *codec) if (!codec->bus->shutdown && spec->jacks.list) { struct sigmatel_jack *jacks = spec->jacks.list; int i; - for (i = 0; i < spec->jacks.used; i++) - snd_device_free(codec->bus->card, &jacks[i].jack); + for (i = 0; i < spec->jacks.used; i++, jacks++) { + if (jacks->jack) + snd_device_free(codec->bus->card, jacks->jack); + } } snd_array_free(&spec->jacks); #endif -- cgit v0.10.2 From bd9d074098afb5f8693306d22aaf005bfb50d8f7 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Tue, 14 Apr 2009 08:32:55 +0300 Subject: [ARM] pxa/em-x270: explicitly set .gpio_cs in TDO35S SPI chip data After commit a7bb3909b3293d503211d7f6af8ed62c1644b686 ("spi: pxa2xx_spi: introduce chipselect GPIO to simplify the common cases") the .gpio_cs field in pxa2xx_spi_chip has to be set explicitly. Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 67611da..de40f1695 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -644,8 +644,9 @@ static struct pxa2xx_spi_master em_x270_spi_info = { }; static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { - .rx_threshold = 1, - .tx_threshold = 1, + .rx_threshold = 1, + .tx_threshold = 1, + .gpio_cs = -1, }; static struct tdo24m_platform_data em_x270_tdo24m_pdata = { -- cgit v0.10.2 From 6845a658e09767e72c12558825ed66a9eda02737 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 9 Apr 2009 20:36:57 +0800 Subject: [ARM] pxa/em-x270: remove duplicated #include Remove duplicated #include in arch/arm/mach-pxa/em-x270.c. Signed-off-by: Huang Weiyi Acked-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index de40f1695..bc0f73f 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -28,7 +28,6 @@ #include #include #include -#include #include -- cgit v0.10.2 From 7a9a65ced11ece416b730d6f21040a18e62d78a8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 14 Apr 2009 14:57:36 +0100 Subject: cdc-acm: Fix long standing abuse of tty->low_latency ACM sets the low latency flag but calls the flip buffer routines from IRQ context which isn't permitted (and as of 2.6.29 causes a warning hence this one was caught) Fortunatelt ACM doesn't need to set this flag in the first place as it only set it to work around problems in ancient (pre tty flip rewrite) kernels. Reported-by: Chuck Ebbert Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 869d47c..0a69c09 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -546,10 +546,6 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) tty->driver_data = acm; acm->tty = tty; - /* force low_latency on so that our tty_push actually forces the data through, - otherwise it is scheduled, and with high data rates data can get lost. */ - tty->low_latency = 1; - if (usb_autopm_get_interface(acm->control) < 0) goto early_bail; else -- cgit v0.10.2 From cf5450930db0ae308584e5361f3345e0ff73e643 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 14 Apr 2009 14:58:11 +0100 Subject: tty: Fix leak in ti-usb If the ti-usb adapter returns an zero data length frame (which happens) then we leak a kref. Found by Christoph Mair who proposed a patch. The patch here is different as Christoph's patch didn't work for the case where tty = NULL and data arrived but Christoph did all the hard work chasing it down. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 2620bf6..9c4c700 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1215,20 +1215,22 @@ static void ti_bulk_in_callback(struct urb *urb) } tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { - usb_serial_debug_data(debug, dev, __func__, - urb->actual_length, urb->transfer_buffer); - - if (!tport->tp_is_open) - dbg("%s - port closed, dropping data", __func__); - else - ti_recv(&urb->dev->dev, tty, + if (tty) { + if (urb->actual_length) { + usb_serial_debug_data(debug, dev, __func__, + urb->actual_length, urb->transfer_buffer); + + if (!tport->tp_is_open) + dbg("%s - port closed, dropping data", + __func__); + else + ti_recv(&urb->dev->dev, tty, urb->transfer_buffer, urb->actual_length); - - spin_lock(&tport->tp_lock); - tport->tp_icount.rx += urb->actual_length; - spin_unlock(&tport->tp_lock); + spin_lock(&tport->tp_lock); + tport->tp_icount.rx += urb->actual_length; + spin_unlock(&tport->tp_lock); + } tty_kref_put(tty); } -- cgit v0.10.2 From 28783eb52013ad20784550bccd482e541c9619c2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 14 Apr 2009 14:58:23 +0100 Subject: parport: Fix various uses of parport_pc These got overlooked first time around. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h index dff3f02..ff9ead6 100644 --- a/arch/sparc/include/asm/parport.h +++ b/arch/sparc/include/asm/parport.h @@ -117,7 +117,7 @@ static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id if (!strcmp(parent->name, "dma")) { p = parport_pc_probe_port(base, base + 0x400, op->irqs[0], PARPORT_DMA_NOFIFO, - op->dev.parent->parent); + op->dev.parent->parent, 0); if (!p) return -ENOMEM; dev_set_drvdata(&op->dev, p); @@ -168,7 +168,8 @@ static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id p = parport_pc_probe_port(base, base + 0x400, op->irqs[0], slot, - op->dev.parent); + op->dev.parent, + 0); err = -ENOMEM; if (!p) goto out_disable_irq; diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index 4fa3bb2..33e5ade 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -434,7 +434,8 @@ static void __init superio_parport_init(void) 0 /*base_hi*/, PAR_IRQ, PARPORT_DMA_NONE /* dma */, - NULL /*struct pci_dev* */) ) + NULL /*struct pci_dev* */), + 0 /* shared irq flags */ ) printk(KERN_WARNING PFX "Probing parallel port failed.\n"); #endif /* CONFIG_PARPORT_PC */ -- cgit v0.10.2 From 19e05426201651fe24c4e07bef7f6de0d2305218 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Tue, 14 Apr 2009 14:58:41 +0100 Subject: parport_pc: Fix build failure drivers/parport/parport_pc.c for powerpc In commit 51dcdfec6a274afc1c6fce180d582add9ff512c0 ("parport: Use the PCI IRQ if offered") parport_pc_probe_port() gained an irqflags arg. This isn't being supplied on powerpc. This patch make powerpc fallback to the old behaviour, that is using "0" for irqflags. Fixes build failure: In file included from drivers/parport/parport_pc.c:68: arch/powerpc/include/asm/parport.h: In function 'parport_pc_find_nonpci_ports': arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' make[3]: *** [drivers/parport/parport_pc.o] Error 1 Signed-off-by: Tony Breeds Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h index 414c50e..94942d6 100644 --- a/arch/powerpc/include/asm/parport.h +++ b/arch/powerpc/include/asm/parport.h @@ -29,7 +29,7 @@ static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) prop = of_get_property(np, "interrupts", NULL); if (!prop) continue; - if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL) + if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL, 0) != NULL) count++; } return count; -- cgit v0.10.2 From 78c5b82ee68207a176ad5ca5eabdb2dbe5cfbfd3 Mon Sep 17 00:00:00 2001 From: Leandro Dorileo Date: Tue, 14 Apr 2009 14:59:51 +0100 Subject: tty: Update some of the USB kernel doc Updates some usb_serial_port members documentation. Signed-off-by: Leandro Dorileo Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b958425..625e9e4 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -29,7 +29,7 @@ /** * usb_serial_port: structure for the specific ports of a device. * @serial: pointer back to the struct usb_serial owner of this port. - * @tty: pointer to the corresponding tty for this port. + * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. * @mutex: mutex used to synchronize serial_open() and serial_close() * access for this port. @@ -44,19 +44,22 @@ * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe * for this port. * @bulk_in_buffer: pointer to the bulk in buffer for this port. + * @bulk_in_size: the size of the bulk_in_buffer, in bytes. * @read_urb: pointer to the bulk in struct urb for this port. * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this * port. * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. + * @write_urb_busy: port`s writing status * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. * @write_wait: a wait_queue_head_t used by the port. * @work: work queue entry for the line discipline waking up. - * @open_count: number of times this port has been opened. * @throttled: nonzero if the read urb is inactive to throttle the device * @throttle_req: nonzero if the tty wants to throttle us + * @console: attached usb serial console + * @dev: pointer to the serial device * * This structure is used by the usb-serial core and drivers for the specific * ports of a device. -- cgit v0.10.2 From 94ca8e4852807fc42d2f64fcaf248aafc4f2e6a7 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Tue, 14 Apr 2009 10:56:48 -0500 Subject: x86: UV: BAU partition-relative distribution map This patch enables each partition's BAU distribution bit map to be partition-relative. The distribution bitmap had been constructed assuming 0 as the base node number. That construct would not have allowed a total system of greater than 256 nodes. It also corrects an error that occurred when the first blade's nasid was not zero. That nasid was stored as the base node. The base node number gets added by hardware to the node numbers implied in the distribution bitmap, resulting in invalid target nasids. Tested on the UV hardware simulator. Signed-off-by: Cliff Wickman LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index fced96e..98307f9 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -25,6 +25,8 @@ static int uv_bau_retry_limit __read_mostly; /* position of pnode (which is nasid>>1): */ static int uv_nshift __read_mostly; +/* base pnode in this partition */ +static int uv_partition_base_pnode __read_mostly; static unsigned long uv_mmask __read_mostly; @@ -43,7 +45,7 @@ static int __init blade_to_first_node(int blade) if (blade == b) return node; } - BUG(); + return -1; /* shouldn't happen */ } /* @@ -359,7 +361,8 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, locals++; continue; } - bau_node_set(pnode, &bau_desc->distribution); + bau_node_set(pnode - uv_partition_base_pnode, + &bau_desc->distribution); i++; } if (i == 0) { @@ -728,7 +731,12 @@ uv_activation_descriptor_init(int node, int pnode) for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) { memset(ad2, 0, sizeof(struct bau_desc)); ad2->header.sw_ack_flag = 1; - ad2->header.base_dest_nodeid = uv_cpu_to_pnode(0); + /* + * base_dest_nodeid is the first node in the partition, so + * the bit map will indicate partition-relative node numbers. + * note that base_dest_nodeid is actually a nasid. + */ + ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1; ad2->header.command = UV_NET_ENDPOINT_INTD; ad2->header.int_both = 1; /* @@ -825,6 +833,11 @@ static int __init uv_bau_init(void) kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); BUG_ON(!uv_bau_table_bases); + uv_partition_base_pnode = 0x7fffffff; + for (blade = 0; blade < nblades; blade++) + if (uv_blade_nr_possible_cpus(blade) && + (uv_blade_to_pnode(blade) < uv_partition_base_pnode)) + uv_partition_base_pnode = uv_blade_to_pnode(blade); for (blade = 0; blade < nblades; blade++) if (uv_blade_nr_possible_cpus(blade)) uv_init_blade(blade); -- cgit v0.10.2 From 2344b5b6851466511663154e517f8b31f70c4bb6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 14 Apr 2009 17:08:34 +0100 Subject: Fix lpfc_parse_bg_err()'s use of do_div() Fix lpfc_parse_bg_err()'s use of do_div(). It should be passing a 64-bit variable as the first parameter. However, since it's only using a 32-bit variable, it doesn't need to use do_div() at all, but can instead use the division operator. This deals with the following warnings: CC drivers/scsi/lpfc/lpfc_scsi.o drivers/scsi/lpfc/lpfc_scsi.c: In function 'lpfc_parse_bg_err': drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: comparison of distinct pointer types lacks a cast drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: right shift count >= width of type drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: passing argument 1 of '__div64_32' from incompatible pointer type Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index b1bd3fc..36fd2e7 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1394,7 +1394,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, */ cmd->sense_buffer[8] = 0; /* Information */ cmd->sense_buffer[9] = 0xa; /* Add. length */ - do_div(bghm, cmd->device->sector_size); + bghm /= cmd->device->sector_size; failing_sector = scsi_get_lba(cmd); failing_sector += bghm; -- cgit v0.10.2 From 68c84342171034120c8a1f6dfb8ef51b14250f11 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 8 Apr 2009 10:58:23 +0800 Subject: drm/i915: fix scheduling while holding the new active list spinlock regression caused by commit 5e118f4139feafe97e913df67b1f7c1e5083e535: i915_gem_object_move_to_inactive() should be called in task context, as it calls fput(); Signed-off-by: Shaohua Li [anholt: Add more detail to the comment about the lock break that's added] Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6dca9fc..4642115 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1596,8 +1596,19 @@ i915_gem_retire_request(struct drm_device *dev, if (obj->write_domain != 0) i915_gem_object_move_to_flushing(obj); - else + else { + /* Take a reference on the object so it won't be + * freed while the spinlock is held. The list + * protection for this spinlock is safe when breaking + * the lock like this since the next thing we do + * is just get the head of the list again. + */ + drm_gem_object_reference(obj); i915_gem_object_move_to_inactive(obj); + spin_unlock(&dev_priv->mm.active_list_lock); + drm_gem_object_unreference(obj); + spin_lock(&dev_priv->mm.active_list_lock); + } } out: spin_unlock(&dev_priv->mm.active_list_lock); -- cgit v0.10.2 From 6f66cbc63081fd70e3191b4dbb796746780e5ae1 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 14 Apr 2009 19:25:42 +0100 Subject: x86 microcode: revert some work_on_cpu Revert part of af5c820a3169e81af869c113e18ec7588836cd50 ("x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c") That change is causing only one Intel CPU's microcode to be updated e.g. microcode: CPU3 updated from revision 0x9 to 0x17, date = 2005-04-22 where before it announced that also for CPU0 and CPU1 and CPU2. We cannot use work_on_cpu() in the CONFIG_MICROCODE_OLD_INTERFACE code, because Intel's request_microcode_user() involves a copy_from_user() from /sbin/microcode_ctl, which therefore needs to be on that CPU at the time. Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index a0f3851..2e0eb41 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -108,40 +108,29 @@ struct ucode_cpu_info ucode_cpu_info[NR_CPUS]; EXPORT_SYMBOL_GPL(ucode_cpu_info); #ifdef CONFIG_MICROCODE_OLD_INTERFACE -struct update_for_cpu { - const void __user *buf; - size_t size; -}; - -static long update_for_cpu(void *_ufc) -{ - struct update_for_cpu *ufc = _ufc; - int error; - - error = microcode_ops->request_microcode_user(smp_processor_id(), - ufc->buf, ufc->size); - if (error < 0) - return error; - if (!error) - microcode_ops->apply_microcode(smp_processor_id()); - return error; -} - static int do_microcode_update(const void __user *buf, size_t size) { + cpumask_t old; int error = 0; int cpu; - struct update_for_cpu ufc = { .buf = buf, .size = size }; + + old = current->cpus_allowed; for_each_online_cpu(cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; if (!uci->valid) continue; - error = work_on_cpu(cpu, update_for_cpu, &ufc); + + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + error = microcode_ops->request_microcode_user(cpu, buf, size); if (error < 0) - break; + goto out; + if (!error) + microcode_ops->apply_microcode(cpu); } +out: + set_cpus_allowed_ptr(current, &old); return error; } -- cgit v0.10.2 From 29dab4fd3176e25dfab6cd763beb02d87973c288 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 14 Apr 2009 22:40:04 +0200 Subject: [ALSA] intel8x0: fix wrong conditions in ac97_clock measure routine Also add a little code cleanup. Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 6962f94..10f8609 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -2689,7 +2689,7 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) } ichdev = &chip->ichd[ICHD_PCMOUT]; ichdev->physbuf = subs->dma_buffer.addr; - ichdev->size = chip->ichd[ICHD_PCMOUT].fragsize = INTEL8X0_TESTBUF_SIZE; + ichdev->size = ichdev->fragsize = INTEL8X0_TESTBUF_SIZE; ichdev->substream = NULL; /* don't process interrupts */ /* set rate */ @@ -2766,10 +2766,10 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) if (pos < 40000 || pos >= 60000) /* abnormal value. hw problem? */ printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos); - else if (pos > 40500 || pos < 41500) + else if (pos > 40500 && pos < 41500) /* first exception - 41000Hz reference clock */ chip->ac97_bus->clock = 41000; - else if (pos > 43600 || pos < 44600) + else if (pos > 43600 && pos < 44600) /* second exception - 44100HZ reference clock */ chip->ac97_bus->clock = 44100; else if (pos < 47500 || pos > 48500) -- cgit v0.10.2 From 0882e8dd3aad33eca41696d463bb896e6c8817eb Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 14 Apr 2009 13:51:48 -0700 Subject: Linux 2.6.30-rc2 diff --git a/Makefile b/Makefile index 4f7e3cc..bfdef56 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Temporary Tasmanian Devil # *DOCUMENTATION* -- cgit v0.10.2 From fc59f9a3bf8096a1f68a8b78ada7a0e0ab9236b2 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 14 Apr 2009 15:11:06 -0700 Subject: gro: Restore correct value to gso_size Since everybody has been focusing on baremetal GRO performance no one noticed when I added a bug that zapped gso_size for all GRO packets. This only gets picked up when you forward the skb out of an interface. Thanks to Mark Wagner for noticing this bug when testing kvm. Reported-by: Mark Wagner Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index ea8eb22..343883f 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2328,8 +2328,10 @@ static int napi_gro_complete(struct sk_buff *skb) struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK]; int err = -ENOENT; - if (NAPI_GRO_CB(skb)->count == 1) + if (NAPI_GRO_CB(skb)->count == 1) { + skb_shinfo(skb)->gso_size = 0; goto out; + } rcu_read_lock(); list_for_each_entry_rcu(ptype, head, list) { @@ -2348,7 +2350,6 @@ static int napi_gro_complete(struct sk_buff *skb) } out: - skb_shinfo(skb)->gso_size = 0; return netif_receive_skb(skb); } -- cgit v0.10.2 From d119b3927994e3d620d6adb0dd1ea6bf24427875 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Tue, 14 Apr 2009 15:16:55 -0700 Subject: skge: fix occasional BUG during MTU change The BUG_ON(skge->tx_ring.to_use != skge->tx_ring.to_clean) in skge_up() was sometimes observed when setting MTU. skge_down() disables the TX queue, but then reenables it by mistake via skge_tx_clean(). Fix it by moving the waking of the queue from skge_tx_clean() to the other caller. And to make sure start_xmit is not in progress on another CPU, skge_down() should call netif_tx_disable(). The bug was reported to me by Jiri Jilek whose Debian system sometimes failed to boot. He tested the patch and the bug did not happen anymore. Signed-off-by: Michal Schmidt Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/skge.c b/drivers/net/skge.c index b8978d4..c11cdd0 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2674,7 +2674,7 @@ static int skge_down(struct net_device *dev) if (netif_msg_ifdown(skge)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); - netif_stop_queue(dev); + netif_tx_disable(dev); if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC) del_timer_sync(&skge->link_timer); @@ -2881,7 +2881,6 @@ static void skge_tx_clean(struct net_device *dev) } skge->tx_ring.to_clean = e; - netif_wake_queue(dev); } static void skge_tx_timeout(struct net_device *dev) @@ -2893,6 +2892,7 @@ static void skge_tx_timeout(struct net_device *dev) skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_STOP); skge_tx_clean(dev); + netif_wake_queue(dev); } static int skge_change_mtu(struct net_device *dev, int new_mtu) -- cgit v0.10.2 From 32e8f9a8d9bd52b59b512f8e5177b08e8edfd58b Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 14 Apr 2009 15:18:00 -0700 Subject: ehea: Fix incomplete conversion to net_device_ops Reported-by: Subrata Modak Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index ac0c5b4..604c844 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -3080,7 +3080,8 @@ static const struct net_device_ops ehea_netdev_ops = { .ndo_change_mtu = ehea_change_mtu, .ndo_vlan_rx_register = ehea_vlan_rx_register, .ndo_vlan_rx_add_vid = ehea_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = ehea_vlan_rx_kill_vid + .ndo_vlan_rx_kill_vid = ehea_vlan_rx_kill_vid, + .ndo_tx_timeout = ehea_tx_watchdog, }; struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, @@ -3142,7 +3143,6 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, | NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER | NETIF_F_LLTX; - dev->tx_timeout = &ehea_tx_watchdog; dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT; INIT_WORK(&port->reset_task, ehea_reset_port); -- cgit v0.10.2 From df26fd2c594a0876b4e6b802dee7753024e484d9 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 14 Apr 2009 16:38:49 -0700 Subject: e1000/e1000: fix compile warning e1000/e1000e compile report a possible unused variable, fix that for now. Shortly after this a small refactor and bug fix will follow in the same code. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ddc5c53..4cd8b25 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3834,7 +3834,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - bool cleaned; + bool cleaned = false; unsigned int total_tx_bytes=0, total_tx_packets=0; i = tx_ring->next_to_clean; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 409b58c..3b0f087 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -621,7 +621,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - bool cleaned; + bool cleaned = false; unsigned int total_tx_bytes = 0, total_tx_packets = 0; i = tx_ring->next_to_clean; -- cgit v0.10.2 From 2690f8d62e98779c71625dba9a0fd525d8b2263d Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Tue, 14 Apr 2009 16:53:14 -0700 Subject: bonding: Remove debug printk Remove debug printk I accidently left in as part of commit: commit 6146b1a4da98377e4abddc91ba5856bef8f23f1e Author: Jay Vosburgh Date: Tue Nov 4 17:51:15 2008 -0800 bonding: Fix ALB mode to balance traffic on VLANs Reported by Duncan Gibb Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 8dc6fbb..553a899 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -370,8 +370,6 @@ static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct if (arp->op_code == htons(ARPOP_REPLY)) { /* update rx hash table for this ARP */ - printk("rar: update orig %s bond_dev %s\n", orig_dev->name, - bond_dev->name); bond = netdev_priv(bond_dev); rlb_update_entry_from_arp(bond, arp); pr_debug("Server received an ARP Reply from client\n"); -- cgit v0.10.2 From 8e255baa449df3049a8827a7f1f4f12b6921d0d1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Apr 2009 21:06:35 -0700 Subject: sparc64: Fix smp_callin() locking. Interrupts must be disabled when taking the IPI lock. Caught by lockdep. Reported-by: Meelis Roos Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index 708e12a..f7642e5 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -118,9 +118,9 @@ void __cpuinit smp_callin(void) while (!cpu_isset(cpuid, smp_commenced_mask)) rmb(); - ipi_call_lock(); + ipi_call_lock_irq(); cpu_set(cpuid, cpu_online_map); - ipi_call_unlock(); + ipi_call_unlock_irq(); /* idle thread is expected to have preempt disabled */ preempt_disable(); -- cgit v0.10.2 From c7cb1521b3289e2d107d3139ad7a902b386d7e43 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 14 Apr 2009 02:00:48 -0700 Subject: sparc: asm/atomic.h on 32bit should include asm/system.h for xchg Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h index ce46597..bb91b12 100644 --- a/arch/sparc/include/asm/atomic_32.h +++ b/arch/sparc/include/asm/atomic_32.h @@ -15,6 +15,8 @@ #ifdef __KERNEL__ +#include + #define ATOMIC_INIT(i) { (i) } extern int __atomic_add_return(int, atomic_t *); -- cgit v0.10.2 From 6c0f8bc77233d000a34a01989c42e650c8c32180 Mon Sep 17 00:00:00 2001 From: Stoyan Gaydarov Date: Tue, 14 Apr 2009 19:46:19 -0700 Subject: sbus: changed ioctls to unlocked Signed-off-by: Stoyan Gaydarov Signed-off-by: David S. Miller diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index e6d1fc8..a85ad05 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -383,18 +383,22 @@ static int jsf_ioctl_program(void __user *arg) return 0; } -static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd, - unsigned long arg) +static long jsf_ioctl(struct file *f, unsigned int cmd, unsigned long arg) { + lock_kernel(); int error = -ENOTTY; void __user *argp = (void __user *)arg; - if (!capable(CAP_SYS_ADMIN)) + if (!capable(CAP_SYS_ADMIN)) { + unlock_kernel(); return -EPERM; + } switch (cmd) { case JSFLASH_IDENT: - if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) + if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) { + unlock_kernel(); return -EFAULT; + } break; case JSFLASH_ERASE: error = jsf_ioctl_erase(arg); @@ -404,6 +408,7 @@ static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd, break; } + unlock_kernel(); return error; } @@ -439,7 +444,7 @@ static const struct file_operations jsf_fops = { .llseek = jsf_lseek, .read = jsf_read, .write = jsf_write, - .ioctl = jsf_ioctl, + .unlocked_ioctl = jsf_ioctl, .mmap = jsf_mmap, .open = jsf_open, .release = jsf_release, diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c index 27993c3..2c56fd5 100644 --- a/drivers/sbus/char/uctrl.c +++ b/drivers/sbus/char/uctrl.c @@ -197,9 +197,8 @@ static struct uctrl_driver { static void uctrl_get_event_status(struct uctrl_driver *); static void uctrl_get_external_status(struct uctrl_driver *); -static int -uctrl_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long +uctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { switch (cmd) { default: @@ -226,7 +225,7 @@ static irqreturn_t uctrl_interrupt(int irq, void *dev_id) static const struct file_operations uctrl_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = uctrl_ioctl, + .unlocked_ioctl = uctrl_ioctl, .open = uctrl_open, }; -- cgit v0.10.2 From 718cff1eec595ce6ab0635b8160a51ee37d9268d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 14 Apr 2009 19:47:46 -0700 Subject: sfc: Match calls to netif_napi_add() and netif_napi_del() sfc could call netif_napi_add() multiple times for the same napi_struct, corrupting the list of napi_structs for the associated device and leading to a busy-loop on device removal. Move the call to netif_napi_add() and add a call to netif_napi_del() in the obvious places. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index dee23b1..7269a42 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -448,9 +448,6 @@ static void efx_init_channels(struct efx_nic *efx) WARN_ON(channel->rx_pkt != NULL); efx_rx_strategy(channel); - - netif_napi_add(channel->napi_dev, &channel->napi_str, - efx_poll, napi_weight); } } @@ -1321,6 +1318,8 @@ static int efx_init_napi(struct efx_nic *efx) efx_for_each_channel(channel, efx) { channel->napi_dev = efx->net_dev; + netif_napi_add(channel->napi_dev, &channel->napi_str, + efx_poll, napi_weight); } return 0; } @@ -1330,6 +1329,8 @@ static void efx_fini_napi(struct efx_nic *efx) struct efx_channel *channel; efx_for_each_channel(channel, efx) { + if (channel->napi_dev) + netif_napi_del(&channel->napi_str); channel->napi_dev = NULL; } } -- cgit v0.10.2 From 239795adf7f1a40cf0be0e05544d37706c9b4cf9 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 14 Apr 2009 19:48:34 -0700 Subject: sfc: Use correct macro to set event bitfield falcon_sim_phy_event() used EFX_OWORD_FIELD, which operates on bitfields in 128-bit values, on an event, which is a 64-bit value. This should be harmless - these macros always use little-endian ordering, so it would read and write back the following 8 bytes unchanged - but it is obviously wrong. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index d4629ab..466a8ab 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1176,9 +1176,9 @@ void falcon_sim_phy_event(struct efx_nic *efx) EFX_POPULATE_QWORD_1(phy_event, EV_CODE, GLOBAL_EV_DECODE); if (EFX_IS10G(efx)) - EFX_SET_OWORD_FIELD(phy_event, XG_PHY_INTR, 1); + EFX_SET_QWORD_FIELD(phy_event, XG_PHY_INTR, 1); else - EFX_SET_OWORD_FIELD(phy_event, G_PHY0_INTR, 1); + EFX_SET_QWORD_FIELD(phy_event, G_PHY0_INTR, 1); falcon_generate_event(&efx->channel[0], &phy_event); } -- cgit v0.10.2 From 5e901b37e4a8a305542ad3a776bce997efd7e5e9 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Thu, 9 Apr 2009 14:07:27 +0800 Subject: [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h Signed-off-by: Eric Miao Cc: Philipp Zabel Cc: Mark Brown diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index f7c4544..0625c34 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -27,8 +27,6 @@ #include #include -#include -#include #include #include #include "../codecs/uda1380.h" -- cgit v0.10.2 From eae17754ab1ffc88190ebcbd33b6bec79e6e559a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Apr 2009 11:48:03 +0100 Subject: [ARM] pxa: merge AC97 platform data structures Currently there are two possible platform datas for the PXA AC97 driver: one supported by the generic AC97 driver only which provides callbacks to allow board-specific configuration at stream startup and teardown, and another for pxa2xx-ac97-lib which allows configuration of the reset GPIO for PXA2xx CPUs. Obviously this won't actually work when using the generic AC97 driver since the drivers will attempt to parse the platform data in both formats. Fix this by merging the two structures. Signed-off-by: Mark Brown Acked-by: Robert Jarzmik Cc: Marek Vasut Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h index f82f96d..16eb025 100644 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ b/arch/arm/mach-pxa/include/mach/audio.h @@ -4,12 +4,22 @@ #include #include +/* + * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) + * a -1 value means no gpio will be used for reset + + * reset_gpio should only be specified for pxa27x CPUs where a silicon + * bug prevents correct operation of the reset line. If not specified, + * the default behaviour on these CPUs is to consider gpio 113 as the + * AC97 reset line, which is the default on most boards. + */ typedef struct { int (*startup)(struct snd_pcm_substream *, void *); void (*shutdown)(struct snd_pcm_substream *, void *); void (*suspend)(void *); void (*resume)(void *); void *priv; + int reset_gpio; } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h index 2c894b6..2fd3d25 100644 --- a/include/sound/pxa2xx-lib.h +++ b/include/sound/pxa2xx-lib.h @@ -42,19 +42,4 @@ extern int pxa2xx_ac97_hw_resume(void); extern int pxa2xx_ac97_hw_probe(struct platform_device *dev); extern void pxa2xx_ac97_hw_remove(struct platform_device *dev); -/* AC97 platform_data */ -/** - * struct pxa2xx_ac97_platform_data - pxa ac97 platform data - * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) - * a -1 value means no gpio will be used for reset - * - * Platform data should only be specified for pxa27x CPUs where a silicon bug - * prevents correct operation of the reset line. If not specified, the default - * behaviour is to consider gpio 113 as the AC97 reset line, which is the - * default on most boards. - */ -struct pxa2xx_ac97_platform_data { - int reset_gpio; -}; - #endif diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 0afd1a8..a2c12d1 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -364,7 +364,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume); int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev) { int ret; - struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data; + pxa2xx_audio_ops_t *pdata = dev->dev.platform_data; if (pdata) { switch (pdata->reset_gpio) { -- cgit v0.10.2 From cc8d2730ad6fe79699cedd9cccfe632570830c3c Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Mon, 13 Apr 2009 16:07:55 +0200 Subject: [ARM] pxa/mioa701: use GPIO95 as AC97 reset line MioA701 board's GPIO95 is the AC97 line. The other GPIO113 is not connected to the sound chip, but to the GSM chip as a wakeup line. It happens that when the pxa2xx_ac97 driver reconfigures the gpio as an "out gpio" for AC97 reset (bug workaround), it hangs the GSM chip. As AC97 platform data now enables to specify the AC97 reset line, use it. Signed-off-by: Robert Jarzmik Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 9203b06..ff8052c 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -742,6 +742,10 @@ struct i2c_pxa_platform_data i2c_pdata = { .fast_mode = 1, }; +static pxa2xx_audio_ops_t mioa701_ac97_info = { + .reset_gpio = 95, +}; + /* * Mio global */ @@ -815,7 +819,7 @@ static void __init mioa701_machine_init(void) pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); pxa_set_udc_info(&mioa701_udc_info); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); -- cgit v0.10.2 From 6fd4777a1fec1f7757b5a302ad3fdcc1eae2abba Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Apr 2009 20:28:00 -0700 Subject: Revert "rose: zero length frame filtering in af_rose.c" This reverts commit 244f46ae6e9e18f6fc0be7d1f49febde4762c34b. Alan Cox did the research, and just like the other radio protocols zero-length frames have meaning because at the top level ROSE is X.25 PLP. So this zero-length filtering is invalid. Signed-off-by: David S. Miller diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index 0f36e8d..877a7f6 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1072,10 +1072,6 @@ static int rose_sendmsg(struct kiocb *iocb, struct socket *sock, unsigned char *asmptr; int n, size, qbit = 0; - /* ROSE empty frame has no meaning : don't send */ - if (len == 0) - return 0; - if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_EOR|MSG_CMSG_COMPAT)) return -EINVAL; @@ -1273,12 +1269,6 @@ static int rose_recvmsg(struct kiocb *iocb, struct socket *sock, skb_reset_transport_header(skb); copied = skb->len; - /* ROSE empty frame has no meaning : ignore it */ - if (copied == 0) { - skb_free_datagram(sk, skb); - return copied; - } - if (copied > size) { copied = size; msg->msg_flags |= MSG_TRUNC; -- cgit v0.10.2 From 95615d90a321349709c80091f2a9cb284757ff0d Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Tue, 14 Apr 2009 21:53:48 -0700 Subject: ixgbe: fix tx queue index Don't do the num_tx_queues based masking on calculating tx queue index. 1) num_tx_queues is not always power-of-2, because it also depends on the online cpu numbers. So the masking could be a performance bug on a 6 cpu system. 2) queue_mapping will be limited by real_num_tx_queues=num_tx_queues in the generic netdev function set_cur_queue_map(). So the bound limiting here is not necessary. Signed-off-by: Wu Fengguang Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 9ef128a..862dd34 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -4342,7 +4342,7 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) int count = 0; unsigned int f; - r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping; + r_idx = skb->queue_mapping; tx_ring = &adapter->tx_ring[r_idx]; if (adapter->vlgrp && vlan_tx_tag_present(skb)) { -- cgit v0.10.2 From af22ab1bd20e9dedf3a37cc1d401ef8bbd587ef0 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Tue, 14 Apr 2009 21:54:07 -0700 Subject: ixgbe: update real_num_tx_queues on changing num_rx_queues Move the update of real_num_tx_queues from ixgbe_acquire_msix_vectors() to ixgbe_set_num_queues(), to ensure it be always in sync with num_tx_queues. Signed-off-by: Wu Fengguang Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 862dd34..11fd153 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2723,17 +2723,21 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) **/ static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter) { - /* Start with base case */ - adapter->num_rx_queues = 1; - adapter->num_tx_queues = 1; - #ifdef CONFIG_IXGBE_DCB if (ixgbe_set_dcb_queues(adapter)) - return; + goto done; #endif if (ixgbe_set_rss_queues(adapter)) - return; + goto done; + + /* fallback to base case */ + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + +done: + /* Notify the stack of the (possibly) reduced Tx Queue count. */ + adapter->netdev->real_num_tx_queues = adapter->num_tx_queues; } static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, @@ -2992,9 +2996,6 @@ try_msi: } out: - /* Notify the stack of the (possibly) reduced Tx Queue count. */ - adapter->netdev->real_num_tx_queues = adapter->num_tx_queues; - return err; } -- cgit v0.10.2 From 444f1a92702adb9865dd8f509fd55bca9c46a78e Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 14 Apr 2009 18:30:21 +0000 Subject: a2065: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c index d0d0c2f..02f64d5 100644 --- a/drivers/net/a2065.c +++ b/drivers/net/a2065.c @@ -692,6 +692,17 @@ static struct zorro_driver a2065_driver = { .remove = __devexit_p(a2065_remove_one), }; +static const struct net_device_ops lance_netdev_ops = { + .ndo_open = lance_open, + .ndo_stop = lance_close, + .ndo_start_xmit = lance_start_xmit, + .ndo_tx_timeout = lance_tx_timeout, + .ndo_set_multicast_list = lance_set_multicast, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __devinit a2065_init_one(struct zorro_dev *z, const struct zorro_device_id *ent) { @@ -753,12 +764,8 @@ static int __devinit a2065_init_one(struct zorro_dev *z, priv->rx_ring_mod_mask = RX_RING_MOD_MASK; priv->tx_ring_mod_mask = TX_RING_MOD_MASK; - dev->open = &lance_open; - dev->stop = &lance_close; - dev->hard_start_xmit = &lance_start_xmit; - dev->tx_timeout = &lance_tx_timeout; + dev->netdev_ops = &lance_netdev_ops; dev->watchdog_timeo = 5*HZ; - dev->set_multicast_list = &lance_set_multicast; dev->dma = 0; init_timer(&priv->multicast_timer); -- cgit v0.10.2 From 8e7678fe0992a6107041b839b08ac4af55d41592 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 14 Apr 2009 18:30:22 +0000 Subject: atarilance: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c index 2d81f6a..5425ab0 100644 --- a/drivers/net/atarilance.c +++ b/drivers/net/atarilance.c @@ -453,6 +453,16 @@ static noinline int __init addr_accessible(volatile void *regp, int wordflag, return( ret ); } +static const struct net_device_ops lance_netdev_ops = { + .ndo_open = lance_open, + .ndo_stop = lance_close, + .ndo_start_xmit = lance_start_xmit, + .ndo_set_multicast_list = set_multicast_list, + .ndo_set_mac_address = lance_set_mac_address, + .ndo_tx_timeout = lance_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; static unsigned long __init lance_probe1( struct net_device *dev, struct lance_addr *init_rec ) @@ -623,15 +633,9 @@ static unsigned long __init lance_probe1( struct net_device *dev, if (did_version++ == 0) DPRINTK( 1, ( version )); - /* The LANCE-specific entries in the device structure. */ - dev->open = &lance_open; - dev->hard_start_xmit = &lance_start_xmit; - dev->stop = &lance_close; - dev->set_multicast_list = &set_multicast_list; - dev->set_mac_address = &lance_set_mac_address; + dev->netdev_ops = &lance_netdev_ops; /* XXX MSch */ - dev->tx_timeout = lance_tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; return( 1 ); -- cgit v0.10.2 From d9a92cee09d2748ec5d4126cf36083a3a8a5449d Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 14 Apr 2009 18:30:23 +0000 Subject: au1000: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 4274e4a..d58c105 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1004,12 +1004,12 @@ static void au1000_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } -static void set_rx_mode(struct net_device *dev) +static void au1000_multicast_list(struct net_device *dev) { struct au1000_private *aup = netdev_priv(dev); if (au1000_debug > 4) - printk("%s: set_rx_mode: flags=%x\n", dev->name, dev->flags); + printk("%s: au1000_multicast_list: flags=%x\n", dev->name, dev->flags); if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ aup->mac->control |= MAC_PROMISCUOUS; @@ -1047,6 +1047,18 @@ static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return phy_mii_ioctl(aup->phy_dev, if_mii(rq), cmd); } +static const struct net_device_ops au1000_netdev_ops = { + .ndo_open = au1000_open, + .ndo_stop = au1000_close, + .ndo_start_xmit = au1000_tx, + .ndo_set_multicast_list = au1000_multicast_list, + .ndo_do_ioctl = au1000_ioctl, + .ndo_tx_timeout = au1000_tx_timeout, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static struct net_device * au1000_probe(int port_num) { static unsigned version_printed = 0; @@ -1197,13 +1209,8 @@ static struct net_device * au1000_probe(int port_num) dev->base_addr = base; dev->irq = irq; - dev->open = au1000_open; - dev->hard_start_xmit = au1000_tx; - dev->stop = au1000_close; - dev->set_multicast_list = &set_rx_mode; - dev->do_ioctl = &au1000_ioctl; + dev->netdev_ops = &au1000_netdev_ops; SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); - dev->tx_timeout = au1000_tx_timeout; dev->watchdog_timeo = ETH_TX_TIMEOUT; /* -- cgit v0.10.2 From 149da651bf340b796576a078574fbb49ed09b7ae Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 14 Apr 2009 18:30:24 +0000 Subject: bfin_mac: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 9afe809..9f971ed 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -979,6 +979,20 @@ static int bfin_mac_open(struct net_device *dev) return 0; } +static const struct net_device_ops bfin_mac_netdev_ops = { + .ndo_open = bfin_mac_open, + .ndo_stop = bfin_mac_close, + .ndo_start_xmit = bfin_mac_hard_start_xmit, + .ndo_set_mac_address = bfin_mac_set_mac_address, + .ndo_tx_timeout = bfin_mac_timeout, + .ndo_set_multicast_list = bfin_mac_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = bfin_mac_poll, +#endif +}; + /* * * this makes the board clean up everything that it can @@ -1086,15 +1100,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev) /* Fill in the fields of the device structure with ethernet values. */ ether_setup(ndev); - ndev->open = bfin_mac_open; - ndev->stop = bfin_mac_close; - ndev->hard_start_xmit = bfin_mac_hard_start_xmit; - ndev->set_mac_address = bfin_mac_set_mac_address; - ndev->tx_timeout = bfin_mac_timeout; - ndev->set_multicast_list = bfin_mac_set_multicast_list; -#ifdef CONFIG_NET_POLL_CONTROLLER - ndev->poll_controller = bfin_mac_poll; -#endif + ndev->netdev_ops = &bfin_mac_netdev_ops; ndev->ethtool_ops = &bfin_mac_ethtool_ops; spin_lock_init(&lp->lock); -- cgit v0.10.2 From ad5a24e0944e8a0869d1f685ce4ae739adf84a87 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 14 Apr 2009 18:30:25 +0000 Subject: declance: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 861c867..b62405a 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -1010,6 +1010,17 @@ static void lance_set_multicast_retry(unsigned long _opaque) lance_set_multicast(dev); } +static const struct net_device_ops lance_netdev_ops = { + .ndo_open = lance_open, + .ndo_stop = lance_close, + .ndo_start_xmit = lance_start_xmit, + .ndo_tx_timeout = lance_tx_timeout, + .ndo_set_multicast_list = lance_set_multicast, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __init dec_lance_probe(struct device *bdev, const int type) { static unsigned version_printed; @@ -1223,12 +1234,8 @@ static int __init dec_lance_probe(struct device *bdev, const int type) printk(", addr = %pM, irq = %d\n", dev->dev_addr, dev->irq); - dev->open = &lance_open; - dev->stop = &lance_close; - dev->hard_start_xmit = &lance_start_xmit; - dev->tx_timeout = &lance_tx_timeout; + dev->netdev_ops = &lance_netdev_ops; dev->watchdog_timeo = 5*HZ; - dev->set_multicast_list = &lance_set_multicast; /* lp->ll is the location of the registers for lance card */ lp->ll = ll; -- cgit v0.10.2 From adf213c43898f2324cfc35c315556bc21cb65b31 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 6 Apr 2009 11:01:15 +0000 Subject: powerpc: Allow 256kB pages with SHMEM Now that shmem's divisions by zero and SHMEM_MAX_BYTES are fixed, let powerpc 256kB pages coexist with CONFIG_SHMEM again. Signed-off-by: Hugh Dickins Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 5b50e1a..4c78045 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -462,7 +462,7 @@ config PPC_64K_PAGES config PPC_256K_PAGES bool "256k page size" if 44x - depends on !STDBINUTILS && (!SHMEM || BROKEN) + depends on !STDBINUTILS help Make the page size 256k. -- cgit v0.10.2 From c58dc575f3c8bdc69fb868ec51e1c80ee7cae5e7 Mon Sep 17 00:00:00 2001 From: Mike Mason Date: Fri, 10 Apr 2009 08:57:03 +0000 Subject: powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While adding native EEH support to Emulex and Qlogic drivers, it was discovered that dev->error_state was set to pci_io_channel_normal too late in the recovery process. These drivers rely on error_state to determine if they can access the device in their slot_reset callback, thus error_state needs to be set to pci_io_channel_normal in eeh_report_reset(). Below is a detailed explanation (courtesy of Richard Lary) as to why this is necessary. Background: PCI MMIO or DMA accesses to a frozen slot generate additional EEH errors. If the number of additional EEH errors exceeds EEH_MAX_FAILS the adapter will be shutdown. To avoid triggering excessive EEH errors and an undesirable adapter shutdown, some drivers use the pci_channel_offline(dev) wrapper function to return a Boolean value based on the value of pci_dev->error_state to determine if PCI MMIO or DMA accesses are safe. If the wrapper returns TRUE, drivers must not make PCI MMIO or DMA access to their hardware. The pci_dev structure member error_state reflects one of three values, 1) pci_channel_io_normal, 2) pci_channel_io_frozen, 3) pci_channel_io_perm_failure. Function pci_channel_offline(dev) returns TRUE if error_state is pci_channel_io_frozen or pci_channel_io_perm_failure. The EEH driver sets pci_dev->error_state to pci_channel_io_frozen at the point where the PCI slot is frozen. Currently, the EEH driver restores dev->error_state to pci_channel_io_normal in eeh_report_resume() before calling the driver's resume callback. However, when the EEH driver calls the driver's slot_reset callback() from eeh_report_reset(), it incorrectly indicates the error state is still pci_channel_io_frozen. Waiting until eeh_report_resume() to restore dev->error_state to pci_channel_io_normal is too late for Emulex and QLogic FC drivers and any other drivers which are designed to use common code paths in these two cases: i) those called after the driver's slot_reset callback() and ii) those called after the PCI slot is frozen but before the driver's slot_reset callback is called. Case i) all driver paths executed to reinitialize the hardware after a reset and case ii) all code paths executed by driver kernel threads that run asynchronous to the main driver thread, such as interrupt handlers and worker threads to process driver work queues. Emulex and QLogic FC drivers are designed with common code paths which require that pci_channel_offline(dev) reflect the true state of the hardware. The state transitions that the hardware takes from Normal Operations to Slot Frozen to Reset to Normal Operations are documented in the Power Architecture™ Platform Requirements+ (PAPR+) in Table 75. PE State Control. PAPR defines the following 3 states: 0 -- Not reset, Not EEH stopped, MMIO load/store allowed, DMA allowed (Normal Operations) 1 -- Reset, Not EEH stopped, MMIO load/store disabled, DMA disabled 2 -- Not reset, EEH stopped, MMIO load/store disabled, DMA disabled (Slot Frozen) An EEH error places the slot in state 2 (Frozen) and the adapter driver is notified that an EEH error was detected. If the adapter driver returns PCI_ERS_RESULT_NEED_RESET, the EEH driver calls eeh_reset_device() to place the slot into state 1 (Reset) and eeh_reset_device completes by placing the slot into State 0 (Normal Operations). Upon return from eeh_reset_device(), the EEH driver calls eeh_report_reset, which then calls the adapter's slot_reset callback. At the time the adapter's slot_reset callback is called, the true state of the hardware is Normal Operations and should be accurately reflected by setting dev->error_state to pci_channel_io_normal. The current implementation of EEH driver does not do so and requires this change to correct this deficiency. Signed-off-by: Mike Mason Acked-by: Linas Vepstas Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 380420f..9a2a6e3 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -182,6 +182,8 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) if (!driver) return; + dev->error_state = pci_channel_io_normal; + eeh_enable_irq(dev); if (!driver->err_handler || -- cgit v0.10.2 From 306a82881b14d950d59e0b59a55093a07d82aa9a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 13 Apr 2009 14:09:09 +0000 Subject: powerpc: Fix data-corrupting bug in __futex_atomic_op Richard Henderson pointed out that the powerpc __futex_atomic_op has a bug: it will write the wrong value if the stwcx. fails and it has to retry the lwarx/stwcx. loop, since 'oparg' will have been overwritten by the result from the first time around the loop. This happens because it uses the same register for 'oparg' (an input) as it uses for the result. This fixes it by using separate registers for 'oparg' and 'ret'. Cc: stable@kernel.org Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h index 6d406c5..9696cc3 100644 --- a/arch/powerpc/include/asm/futex.h +++ b/arch/powerpc/include/asm/futex.h @@ -27,7 +27,7 @@ PPC_LONG "1b,4b,2b,4b\n" \ ".previous" \ : "=&r" (oldval), "=&r" (ret) \ - : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \ + : "b" (uaddr), "i" (-EFAULT), "r" (oparg) \ : "cr0", "memory") static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) @@ -47,19 +47,19 @@ static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("", ret, oldval, uaddr, oparg); + __futex_atomic_op("mr %1,%4\n", ret, oldval, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %1,%0,%4\n", ret, oldval, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg); + __futex_atomic_op("or %1,%0,%4\n", ret, oldval, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg); + __futex_atomic_op("andc %1,%0,%4\n", ret, oldval, uaddr, oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg); + __futex_atomic_op("xor %1,%0,%4\n", ret, oldval, uaddr, oparg); break; default: ret = -ENOSYS; -- cgit v0.10.2 From b71a0c296cee4debaf446760fbd29ead1587a7ac Mon Sep 17 00:00:00 2001 From: Sachin Sant Date: Tue, 14 Apr 2009 14:35:55 +0000 Subject: powerpc: pseries/dtl.c should include asm/firmware.h A randconfig build on powerpc failed with: dtl.c: In function 'dtl_init': dtl.c:238: error: implicit declaration of function 'firmware_has_feature' dtl.c:238: error: 'FW_FEATURE_SPLPAR' undeclared (first use in this function) - We need firmware.h for these definitions. Signed-off-by: Sachin Sant Signed-off-by: Jeremy Kerr Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index fafcaa0..ab69925 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "plpar_wrappers.h" -- cgit v0.10.2 From 8f3d8ba20e67991b531e9c0227dcd1f99271a32c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 7 Apr 2009 19:55:13 +0200 Subject: block: move bio list helpers into bio.h It's used by DM and MD and generally useful, so move the bio list helpers into bio.h. Signed-off-by: Christoph Hellwig Acked-by: Alasdair G Kergon Signed-off-by: Jens Axboe diff --git a/drivers/md/dm-bio-list.h b/drivers/md/dm-bio-list.h deleted file mode 100644 index 345098b..0000000 --- a/drivers/md/dm-bio-list.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2004 Red Hat UK Ltd. - * - * This file is released under the GPL. - */ - -#ifndef DM_BIO_LIST_H -#define DM_BIO_LIST_H - -#include - -#ifdef CONFIG_BLOCK - -struct bio_list { - struct bio *head; - struct bio *tail; -}; - -static inline int bio_list_empty(const struct bio_list *bl) -{ - return bl->head == NULL; -} - -static inline void bio_list_init(struct bio_list *bl) -{ - bl->head = bl->tail = NULL; -} - -#define bio_list_for_each(bio, bl) \ - for (bio = (bl)->head; bio; bio = bio->bi_next) - -static inline unsigned bio_list_size(const struct bio_list *bl) -{ - unsigned sz = 0; - struct bio *bio; - - bio_list_for_each(bio, bl) - sz++; - - return sz; -} - -static inline void bio_list_add(struct bio_list *bl, struct bio *bio) -{ - bio->bi_next = NULL; - - if (bl->tail) - bl->tail->bi_next = bio; - else - bl->head = bio; - - bl->tail = bio; -} - -static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio) -{ - bio->bi_next = bl->head; - - bl->head = bio; - - if (!bl->tail) - bl->tail = bio; -} - -static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2) -{ - if (!bl2->head) - return; - - if (bl->tail) - bl->tail->bi_next = bl2->head; - else - bl->head = bl2->head; - - bl->tail = bl2->tail; -} - -static inline void bio_list_merge_head(struct bio_list *bl, - struct bio_list *bl2) -{ - if (!bl2->head) - return; - - if (bl->head) - bl2->tail->bi_next = bl->head; - else - bl->tail = bl2->tail; - - bl->head = bl2->head; -} - -static inline struct bio *bio_list_pop(struct bio_list *bl) -{ - struct bio *bio = bl->head; - - if (bio) { - bl->head = bl->head->bi_next; - if (!bl->head) - bl->tail = NULL; - - bio->bi_next = NULL; - } - - return bio; -} - -static inline struct bio *bio_list_get(struct bio_list *bl) -{ - struct bio *bio = bl->head; - - bl->head = bl->tail = NULL; - - return bio; -} - -#endif /* CONFIG_BLOCK */ -#endif diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index 59ee1b0..559dbb5 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -15,8 +15,6 @@ #include -#include "dm-bio-list.h" - #define DM_MSG_PREFIX "delay" struct delay_c { diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 095f77b..6a386ab 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -8,7 +8,6 @@ #include #include "dm-path-selector.h" -#include "dm-bio-list.h" #include "dm-bio-record.h" #include "dm-uevent.h" diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 536ef0b..076fbb4 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -5,7 +5,6 @@ * This file is released under the GPL. */ -#include "dm-bio-list.h" #include "dm-bio-record.h" #include diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c index 59f8d9d..7b899be 100644 --- a/drivers/md/dm-region-hash.c +++ b/drivers/md/dm-region-hash.c @@ -14,7 +14,6 @@ #include #include "dm.h" -#include "dm-bio-list.h" #define DM_MSG_PREFIX "region hash" diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 981a041..d73f17f 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -22,7 +22,6 @@ #include #include "dm-exception-store.h" -#include "dm-bio-list.h" #define DM_MSG_PREFIX "snapshots" diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 8a994be..424f7b0 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -6,7 +6,6 @@ */ #include "dm.h" -#include "dm-bio-list.h" #include "dm-uevent.h" #include diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 274b491..36df910 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -35,7 +35,6 @@ #include #include #include "md.h" -#include "dm-bio-list.h" #include "raid1.h" #include "bitmap.h" diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index e293d92..81a54f1 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -22,7 +22,6 @@ #include #include #include "md.h" -#include "dm-bio-list.h" #include "raid10.h" #include "bitmap.h" diff --git a/include/linux/bio.h b/include/linux/bio.h index b900d2c6..b89cf2d 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -504,6 +504,115 @@ static inline int bio_has_data(struct bio *bio) return bio && bio->bi_io_vec != NULL; } +/* + * BIO list managment for use by remapping drivers (e.g. DM or MD). + * + * A bio_list anchors a singly-linked list of bios chained through the bi_next + * member of the bio. The bio_list also caches the last list member to allow + * fast access to the tail. + */ +struct bio_list { + struct bio *head; + struct bio *tail; +}; + +static inline int bio_list_empty(const struct bio_list *bl) +{ + return bl->head == NULL; +} + +static inline void bio_list_init(struct bio_list *bl) +{ + bl->head = bl->tail = NULL; +} + +#define bio_list_for_each(bio, bl) \ + for (bio = (bl)->head; bio; bio = bio->bi_next) + +static inline unsigned bio_list_size(const struct bio_list *bl) +{ + unsigned sz = 0; + struct bio *bio; + + bio_list_for_each(bio, bl) + sz++; + + return sz; +} + +static inline void bio_list_add(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = NULL; + + if (bl->tail) + bl->tail->bi_next = bio; + else + bl->head = bio; + + bl->tail = bio; +} + +static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = bl->head; + + bl->head = bio; + + if (!bl->tail) + bl->tail = bio; +} + +static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->tail) + bl->tail->bi_next = bl2->head; + else + bl->head = bl2->head; + + bl->tail = bl2->tail; +} + +static inline void bio_list_merge_head(struct bio_list *bl, + struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->head) + bl2->tail->bi_next = bl->head; + else + bl->tail = bl2->tail; + + bl->head = bl2->head; +} + +static inline struct bio *bio_list_pop(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + if (bio) { + bl->head = bl->head->bi_next; + if (!bl->head) + bl->tail = NULL; + + bio->bi_next = NULL; + } + + return bio; +} + +static inline struct bio *bio_list_get(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + bl->head = bl->tail = NULL; + + return bio; +} + #if defined(CONFIG_BLK_DEV_INTEGRITY) #define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)])) -- cgit v0.10.2 From f600abe2de81628c40effbb3f8eaf5af0d291e57 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 8 Apr 2009 14:22:01 +0200 Subject: block: fix bad spelling of quiesce Credit goes to Andrew Morton for spotting this one. Signed-off-by: Jens Axboe diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 73f36be..cac4e9f 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -209,14 +209,14 @@ static ssize_t queue_iostats_store(struct request_queue *q, const char *page, ssize_t ret = queue_var_store(&stats, page, count); spin_lock_irq(q->queue_lock); - elv_quisce_start(q); + elv_quiesce_start(q); if (stats) queue_flag_set(QUEUE_FLAG_IO_STAT, q); else queue_flag_clear(QUEUE_FLAG_IO_STAT, q); - elv_quisce_end(q); + elv_quiesce_end(q); spin_unlock_irq(q->queue_lock); return ret; diff --git a/block/blk.h b/block/blk.h index 24fcaee..5dfc412 100644 --- a/block/blk.h +++ b/block/blk.h @@ -70,8 +70,8 @@ void blk_queue_congestion_threshold(struct request_queue *q); int blk_dev_init(void); -void elv_quisce_start(struct request_queue *q); -void elv_quisce_end(struct request_queue *q); +void elv_quiesce_start(struct request_queue *q); +void elv_quiesce_end(struct request_queue *q); /* diff --git a/block/elevator.c b/block/elevator.c index fb81bcc..7073a90 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -590,7 +590,7 @@ void elv_drain_elevator(struct request_queue *q) /* * Call with queue lock held, interrupts disabled */ -void elv_quisce_start(struct request_queue *q) +void elv_quiesce_start(struct request_queue *q) { queue_flag_set(QUEUE_FLAG_ELVSWITCH, q); @@ -607,7 +607,7 @@ void elv_quisce_start(struct request_queue *q) } } -void elv_quisce_end(struct request_queue *q) +void elv_quiesce_end(struct request_queue *q) { queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q); } @@ -1126,7 +1126,7 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e) * Turn on BYPASS and drain all requests w/ elevator private data */ spin_lock_irq(q->queue_lock); - elv_quisce_start(q); + elv_quiesce_start(q); /* * Remember old elevator. @@ -1150,7 +1150,7 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e) */ elevator_exit(old_elevator); spin_lock_irq(q->queue_lock); - elv_quisce_end(q); + elv_quiesce_end(q); spin_unlock_irq(q->queue_lock); blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name); -- cgit v0.10.2 From 48e70bc18ac81881dedd3aa327c55b924fc41ecf Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 14 Apr 2009 08:19:27 +0200 Subject: Document and move the various READ/WRITE types It's a somewhat twisty maze of hints and behavioural modifiers, try and clear it up a bit with some documentation. Signed-off-by: Jens Axboe diff --git a/include/linux/fs.h b/include/linux/fs.h index 562d285..b535aec4 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -87,6 +87,60 @@ struct inodes_stat_t { */ #define FMODE_NOCMTIME ((__force fmode_t)2048) +/* + * The below are the various read and write types that we support. Some of + * them include behavioral modifiers that send information down to the + * block layer and IO scheduler. Terminology: + * + * The block layer uses device plugging to defer IO a little bit, in + * the hope that we will see more IO very shortly. This increases + * coalescing of adjacent IO and thus reduces the number of IOs we + * have to send to the device. It also allows for better queuing, + * if the IO isn't mergeable. If the caller is going to be waiting + * for the IO, then he must ensure that the device is unplugged so + * that the IO is dispatched to the driver. + * + * All IO is handled async in Linux. This is fine for background + * writes, but for reads or writes that someone waits for completion + * on, we want to notify the block layer and IO scheduler so that they + * know about it. That allows them to make better scheduling + * decisions. So when the below references 'sync' and 'async', it + * is referencing this priority hint. + * + * With that in mind, the available types are: + * + * READ A normal read operation. Device will be plugged. + * READ_SYNC A synchronous read. Device is not plugged, caller can + * immediately wait on this read without caring about + * unplugging. + * READA Used for read-ahead operations. Lower priority, and the + * block layer could (in theory) choose to ignore this + * request if it runs into resource problems. + * WRITE A normal async write. Device will be plugged. + * SWRITE Like WRITE, but a special case for ll_rw_block() that + * tells it to lock the buffer first. Normally a buffer + * must be locked before doing IO. + * WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down + * the hint that someone will be waiting on this IO + * shortly. The device must still be unplugged explicitly, + * WRITE_SYNC_PLUG does not do this as we could be + * submitting more writes before we actually wait on any + * of them. + * WRITE_SYNC Like WRITE_SYNC_PLUG, but also unplugs the device + * immediately after submission. The write equivalent + * of READ_SYNC. + * WRITE_ODIRECT Special case write for O_DIRECT only. + * SWRITE_SYNC + * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer. + * See SWRITE. + * WRITE_BARRIER Like WRITE, but tells the block layer that all + * previously submitted writes must be safely on storage + * before this one is started. Also guarantees that when + * this write is complete, it itself is also safely on + * storage. Prevents reordering of writes on both sides + * of this IO. + * + */ #define RW_MASK 1 #define RWA_MASK 2 #define READ 0 @@ -102,6 +156,11 @@ struct inodes_stat_t { (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE)) #define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG)) #define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER)) + +/* + * These aren't really reads or writes, they pass down information about + * parts of device that are now unused by the file system. + */ #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD) #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER)) -- cgit v0.10.2 From b0b78f81a5a3bfe9442fcc3a9c13e298a742556a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 8 Apr 2009 10:56:08 +0200 Subject: cfq-iosched: use rw_is_sync() to see if rw flags are sync or not Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index a4809de..f36f8b4 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2062,7 +2062,7 @@ static int cfq_may_queue(struct request_queue *q, int rw) if (!cic) return ELV_MQUEUE_MAY; - cfqq = cic_to_cfqq(cic, rw & REQ_RW_SYNC); + cfqq = cic_to_cfqq(cic, rw_is_sync(rw)); if (cfqq) { cfq_init_prio_data(cfqq, cic->ioc); cfq_prio_boost(cfqq); -- cgit v0.10.2 From ff6657c6c8ac99444e5dd4c4f7c1dc9271173382 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 8 Apr 2009 10:58:57 +0200 Subject: cfq-iosched: get rid of private SYNC/ASYNC defines We can just use the block layer BLK_RW_SYNC/ASYNC defines now. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index f36f8b4..cba8a5d 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -56,9 +56,6 @@ static DEFINE_SPINLOCK(ioc_gone_lock); #define cfq_class_idle(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE) #define cfq_class_rt(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_RT) -#define ASYNC (0) -#define SYNC (1) - #define sample_valid(samples) ((samples) > 80) /* @@ -1333,14 +1330,14 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd, if (ioc->ioc_data == cic) rcu_assign_pointer(ioc->ioc_data, NULL); - if (cic->cfqq[ASYNC]) { - cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]); - cic->cfqq[ASYNC] = NULL; + if (cic->cfqq[BLK_RW_ASYNC]) { + cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]); + cic->cfqq[BLK_RW_ASYNC] = NULL; } - if (cic->cfqq[SYNC]) { - cfq_exit_cfqq(cfqd, cic->cfqq[SYNC]); - cic->cfqq[SYNC] = NULL; + if (cic->cfqq[BLK_RW_SYNC]) { + cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_SYNC]); + cic->cfqq[BLK_RW_SYNC] = NULL; } } @@ -1449,17 +1446,18 @@ static void changed_ioprio(struct io_context *ioc, struct cfq_io_context *cic) spin_lock_irqsave(cfqd->queue->queue_lock, flags); - cfqq = cic->cfqq[ASYNC]; + cfqq = cic->cfqq[BLK_RW_ASYNC]; if (cfqq) { struct cfq_queue *new_cfqq; - new_cfqq = cfq_get_queue(cfqd, ASYNC, cic->ioc, GFP_ATOMIC); + new_cfqq = cfq_get_queue(cfqd, BLK_RW_ASYNC, cic->ioc, + GFP_ATOMIC); if (new_cfqq) { - cic->cfqq[ASYNC] = new_cfqq; + cic->cfqq[BLK_RW_ASYNC] = new_cfqq; cfq_put_queue(cfqq); } } - cfqq = cic->cfqq[SYNC]; + cfqq = cic->cfqq[BLK_RW_SYNC]; if (cfqq) cfq_mark_cfqq_prio_changed(cfqq); -- cgit v0.10.2 From 1d6bfbdf38f37bcc259e7c56c8c73664772651fb Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 8 Apr 2009 11:02:08 +0200 Subject: as-iosched: get rid of private REQ_SYNC/REQ_ASYNC defines We can just use the block layer BLK_RW_SYNC/ASYNC defines now. Signed-off-by: Jens Axboe diff --git a/block/as-iosched.c b/block/as-iosched.c index 631f6f4..c48fa67 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -17,9 +17,6 @@ #include #include -#define REQ_SYNC 1 -#define REQ_ASYNC 0 - /* * See Documentation/block/as-iosched.txt */ @@ -93,7 +90,7 @@ struct as_data { struct list_head fifo_list[2]; struct request *next_rq[2]; /* next in sort order */ - sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */ + sector_t last_sector[2]; /* last SYNC & ASYNC sectors */ unsigned long exit_prob; /* probability a task will exit while being waited on */ @@ -109,7 +106,7 @@ struct as_data { unsigned long last_check_fifo[2]; int changed_batch; /* 1: waiting for old batch to end */ int new_batch; /* 1: waiting on first read complete */ - int batch_data_dir; /* current batch REQ_SYNC / REQ_ASYNC */ + int batch_data_dir; /* current batch SYNC / ASYNC */ int write_batch_count; /* max # of reqs in a write batch */ int current_write_count; /* how many requests left this batch */ int write_batch_idled; /* has the write batch gone idle? */ @@ -554,7 +551,7 @@ static void as_update_iohist(struct as_data *ad, struct as_io_context *aic, if (aic == NULL) return; - if (data_dir == REQ_SYNC) { + if (data_dir == BLK_RW_SYNC) { unsigned long in_flight = atomic_read(&aic->nr_queued) + atomic_read(&aic->nr_dispatched); spin_lock(&aic->lock); @@ -811,7 +808,7 @@ static void as_update_rq(struct as_data *ad, struct request *rq) */ static void update_write_batch(struct as_data *ad) { - unsigned long batch = ad->batch_expire[REQ_ASYNC]; + unsigned long batch = ad->batch_expire[BLK_RW_ASYNC]; long write_time; write_time = (jiffies - ad->current_batch_expires) + batch; @@ -855,7 +852,7 @@ static void as_completed_request(struct request_queue *q, struct request *rq) kblockd_schedule_work(q, &ad->antic_work); ad->changed_batch = 0; - if (ad->batch_data_dir == REQ_SYNC) + if (ad->batch_data_dir == BLK_RW_SYNC) ad->new_batch = 1; } WARN_ON(ad->nr_dispatched == 0); @@ -869,7 +866,7 @@ static void as_completed_request(struct request_queue *q, struct request *rq) if (ad->new_batch && ad->batch_data_dir == rq_is_sync(rq)) { update_write_batch(ad); ad->current_batch_expires = jiffies + - ad->batch_expire[REQ_SYNC]; + ad->batch_expire[BLK_RW_SYNC]; ad->new_batch = 0; } @@ -960,7 +957,7 @@ static inline int as_batch_expired(struct as_data *ad) if (ad->changed_batch || ad->new_batch) return 0; - if (ad->batch_data_dir == REQ_SYNC) + if (ad->batch_data_dir == BLK_RW_SYNC) /* TODO! add a check so a complete fifo gets written? */ return time_after(jiffies, ad->current_batch_expires); @@ -986,7 +983,7 @@ static void as_move_to_dispatch(struct as_data *ad, struct request *rq) */ ad->last_sector[data_dir] = rq->sector + rq->nr_sectors; - if (data_dir == REQ_SYNC) { + if (data_dir == BLK_RW_SYNC) { struct io_context *ioc = RQ_IOC(rq); /* In case we have to anticipate after this */ copy_io_context(&ad->io_context, &ioc); @@ -1025,41 +1022,41 @@ static void as_move_to_dispatch(struct as_data *ad, struct request *rq) static int as_dispatch_request(struct request_queue *q, int force) { struct as_data *ad = q->elevator->elevator_data; - const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]); - const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]); + const int reads = !list_empty(&ad->fifo_list[BLK_RW_SYNC]); + const int writes = !list_empty(&ad->fifo_list[BLK_RW_ASYNC]); struct request *rq; if (unlikely(force)) { /* * Forced dispatch, accounting is useless. Reset * accounting states and dump fifo_lists. Note that - * batch_data_dir is reset to REQ_SYNC to avoid + * batch_data_dir is reset to BLK_RW_SYNC to avoid * screwing write batch accounting as write batch * accounting occurs on W->R transition. */ int dispatched = 0; - ad->batch_data_dir = REQ_SYNC; + ad->batch_data_dir = BLK_RW_SYNC; ad->changed_batch = 0; ad->new_batch = 0; - while (ad->next_rq[REQ_SYNC]) { - as_move_to_dispatch(ad, ad->next_rq[REQ_SYNC]); + while (ad->next_rq[BLK_RW_SYNC]) { + as_move_to_dispatch(ad, ad->next_rq[BLK_RW_SYNC]); dispatched++; } - ad->last_check_fifo[REQ_SYNC] = jiffies; + ad->last_check_fifo[BLK_RW_SYNC] = jiffies; - while (ad->next_rq[REQ_ASYNC]) { - as_move_to_dispatch(ad, ad->next_rq[REQ_ASYNC]); + while (ad->next_rq[BLK_RW_ASYNC]) { + as_move_to_dispatch(ad, ad->next_rq[BLK_RW_ASYNC]); dispatched++; } - ad->last_check_fifo[REQ_ASYNC] = jiffies; + ad->last_check_fifo[BLK_RW_ASYNC] = jiffies; return dispatched; } /* Signal that the write batch was uncontended, so we can't time it */ - if (ad->batch_data_dir == REQ_ASYNC && !reads) { + if (ad->batch_data_dir == BLK_RW_ASYNC && !reads) { if (ad->current_write_count == 0 || !writes) ad->write_batch_idled = 1; } @@ -1076,8 +1073,8 @@ static int as_dispatch_request(struct request_queue *q, int force) */ rq = ad->next_rq[ad->batch_data_dir]; - if (ad->batch_data_dir == REQ_SYNC && ad->antic_expire) { - if (as_fifo_expired(ad, REQ_SYNC)) + if (ad->batch_data_dir == BLK_RW_SYNC && ad->antic_expire) { + if (as_fifo_expired(ad, BLK_RW_SYNC)) goto fifo_expired; if (as_can_anticipate(ad, rq)) { @@ -1090,7 +1087,7 @@ static int as_dispatch_request(struct request_queue *q, int force) /* we have a "next request" */ if (reads && !writes) ad->current_batch_expires = - jiffies + ad->batch_expire[REQ_SYNC]; + jiffies + ad->batch_expire[BLK_RW_SYNC]; goto dispatch_request; } } @@ -1101,20 +1098,20 @@ static int as_dispatch_request(struct request_queue *q, int force) */ if (reads) { - BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_SYNC])); + BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_SYNC])); - if (writes && ad->batch_data_dir == REQ_SYNC) + if (writes && ad->batch_data_dir == BLK_RW_SYNC) /* * Last batch was a read, switch to writes */ goto dispatch_writes; - if (ad->batch_data_dir == REQ_ASYNC) { + if (ad->batch_data_dir == BLK_RW_ASYNC) { WARN_ON(ad->new_batch); ad->changed_batch = 1; } - ad->batch_data_dir = REQ_SYNC; - rq = rq_entry_fifo(ad->fifo_list[REQ_SYNC].next); + ad->batch_data_dir = BLK_RW_SYNC; + rq = rq_entry_fifo(ad->fifo_list[BLK_RW_SYNC].next); ad->last_check_fifo[ad->batch_data_dir] = jiffies; goto dispatch_request; } @@ -1125,9 +1122,9 @@ static int as_dispatch_request(struct request_queue *q, int force) if (writes) { dispatch_writes: - BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_ASYNC])); + BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_ASYNC])); - if (ad->batch_data_dir == REQ_SYNC) { + if (ad->batch_data_dir == BLK_RW_SYNC) { ad->changed_batch = 1; /* @@ -1137,11 +1134,11 @@ dispatch_writes: */ ad->new_batch = 0; } - ad->batch_data_dir = REQ_ASYNC; + ad->batch_data_dir = BLK_RW_ASYNC; ad->current_write_count = ad->write_batch_count; ad->write_batch_idled = 0; - rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next); - ad->last_check_fifo[REQ_ASYNC] = jiffies; + rq = rq_entry_fifo(ad->fifo_list[BLK_RW_ASYNC].next); + ad->last_check_fifo[BLK_RW_ASYNC] = jiffies; goto dispatch_request; } @@ -1164,9 +1161,9 @@ fifo_expired: if (ad->nr_dispatched) return 0; - if (ad->batch_data_dir == REQ_ASYNC) + if (ad->batch_data_dir == BLK_RW_ASYNC) ad->current_batch_expires = jiffies + - ad->batch_expire[REQ_ASYNC]; + ad->batch_expire[BLK_RW_ASYNC]; else ad->new_batch = 1; @@ -1238,8 +1235,8 @@ static int as_queue_empty(struct request_queue *q) { struct as_data *ad = q->elevator->elevator_data; - return list_empty(&ad->fifo_list[REQ_ASYNC]) - && list_empty(&ad->fifo_list[REQ_SYNC]); + return list_empty(&ad->fifo_list[BLK_RW_ASYNC]) + && list_empty(&ad->fifo_list[BLK_RW_SYNC]); } static int @@ -1346,8 +1343,8 @@ static void as_exit_queue(struct elevator_queue *e) del_timer_sync(&ad->antic_timer); cancel_work_sync(&ad->antic_work); - BUG_ON(!list_empty(&ad->fifo_list[REQ_SYNC])); - BUG_ON(!list_empty(&ad->fifo_list[REQ_ASYNC])); + BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_SYNC])); + BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_ASYNC])); put_io_context(ad->io_context); kfree(ad); @@ -1372,18 +1369,18 @@ static void *as_init_queue(struct request_queue *q) init_timer(&ad->antic_timer); INIT_WORK(&ad->antic_work, as_work_handler); - INIT_LIST_HEAD(&ad->fifo_list[REQ_SYNC]); - INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]); - ad->sort_list[REQ_SYNC] = RB_ROOT; - ad->sort_list[REQ_ASYNC] = RB_ROOT; - ad->fifo_expire[REQ_SYNC] = default_read_expire; - ad->fifo_expire[REQ_ASYNC] = default_write_expire; + INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_SYNC]); + INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_ASYNC]); + ad->sort_list[BLK_RW_SYNC] = RB_ROOT; + ad->sort_list[BLK_RW_ASYNC] = RB_ROOT; + ad->fifo_expire[BLK_RW_SYNC] = default_read_expire; + ad->fifo_expire[BLK_RW_ASYNC] = default_write_expire; ad->antic_expire = default_antic_expire; - ad->batch_expire[REQ_SYNC] = default_read_batch_expire; - ad->batch_expire[REQ_ASYNC] = default_write_batch_expire; + ad->batch_expire[BLK_RW_SYNC] = default_read_batch_expire; + ad->batch_expire[BLK_RW_ASYNC] = default_write_batch_expire; - ad->current_batch_expires = jiffies + ad->batch_expire[REQ_SYNC]; - ad->write_batch_count = ad->batch_expire[REQ_ASYNC] / 10; + ad->current_batch_expires = jiffies + ad->batch_expire[BLK_RW_SYNC]; + ad->write_batch_count = ad->batch_expire[BLK_RW_ASYNC] / 10; if (ad->write_batch_count < 2) ad->write_batch_count = 2; @@ -1432,11 +1429,11 @@ static ssize_t __FUNC(struct elevator_queue *e, char *page) \ struct as_data *ad = e->elevator_data; \ return as_var_show(jiffies_to_msecs((__VAR)), (page)); \ } -SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[REQ_SYNC]); -SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[REQ_ASYNC]); +SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[BLK_RW_SYNC]); +SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[BLK_RW_ASYNC]); SHOW_FUNCTION(as_antic_expire_show, ad->antic_expire); -SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[REQ_SYNC]); -SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[REQ_ASYNC]); +SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[BLK_RW_SYNC]); +SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[BLK_RW_ASYNC]); #undef SHOW_FUNCTION #define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX) \ @@ -1451,13 +1448,14 @@ static ssize_t __FUNC(struct elevator_queue *e, const char *page, size_t count) *(__PTR) = msecs_to_jiffies(*(__PTR)); \ return ret; \ } -STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[REQ_SYNC], 0, INT_MAX); -STORE_FUNCTION(as_write_expire_store, &ad->fifo_expire[REQ_ASYNC], 0, INT_MAX); +STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[BLK_RW_SYNC], 0, INT_MAX); +STORE_FUNCTION(as_write_expire_store, + &ad->fifo_expire[BLK_RW_ASYNC], 0, INT_MAX); STORE_FUNCTION(as_antic_expire_store, &ad->antic_expire, 0, INT_MAX); STORE_FUNCTION(as_read_batch_expire_store, - &ad->batch_expire[REQ_SYNC], 0, INT_MAX); + &ad->batch_expire[BLK_RW_SYNC], 0, INT_MAX); STORE_FUNCTION(as_write_batch_expire_store, - &ad->batch_expire[REQ_ASYNC], 0, INT_MAX); + &ad->batch_expire[BLK_RW_ASYNC], 0, INT_MAX); #undef STORE_FUNCTION #define AS_ATTR(name) \ -- cgit v0.10.2 From 329007ce25d56fc7113df7b4828d607806d8bc21 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 8 Apr 2009 11:38:50 +0200 Subject: block: update biodoc.txt on plugging We do per-device plugging, get rid of any references to tq_disk as that has been dead since 2.6.5 or so. Signed-off-by: Jens Axboe diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index ecad6ee..6fab97e 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -1040,23 +1040,21 @@ Front merges are handled by the binary trees in AS and deadline schedulers. iii. Plugging the queue to batch requests in anticipation of opportunities for merge/sort optimizations -This is just the same as in 2.4 so far, though per-device unplugging -support is anticipated for 2.5. Also with a priority-based i/o scheduler, -such decisions could be based on request priorities. - Plugging is an approach that the current i/o scheduling algorithm resorts to so that it collects up enough requests in the queue to be able to take advantage of the sorting/merging logic in the elevator. If the queue is empty when a request comes in, then it plugs the request queue -(sort of like plugging the bottom of a vessel to get fluid to build up) +(sort of like plugging the bath tub of a vessel to get fluid to build up) till it fills up with a few more requests, before starting to service the requests. This provides an opportunity to merge/sort the requests before passing them down to the device. There are various conditions when the queue is unplugged (to open up the flow again), either through a scheduled task or could be on demand. For example wait_on_buffer sets the unplugging going -(by running tq_disk) so the read gets satisfied soon. So in the read case, -the queue gets explicitly unplugged as part of waiting for completion, -in fact all queues get unplugged as a side-effect. +through sync_buffer() running blk_run_address_space(mapping). Or the caller +can do it explicity through blk_unplug(bdev). So in the read case, +the queue gets explicitly unplugged as part of waiting for completion on that +buffer. For page driven IO, the address space ->sync_page() takes care of +doing the blk_run_address_space(). Aside: This is kind of controversial territory, as it's not clear if plugging is @@ -1067,11 +1065,6 @@ Aside: multi-page bios being queued in one shot, we may not need to wait to merge a big request from the broken up pieces coming by. - Per-queue granularity unplugging (still a Todo) may help reduce some of the - concerns with just a single tq_disk flush approach. Something like - blk_kick_queue() to unplug a specific queue (right away ?) - or optionally, all queues, is in the plan. - 4.4 I/O contexts I/O contexts provide a dynamically allocated per process data area. They may be used in I/O schedulers, and in the block layer (could be used for IO statis, -- cgit v0.10.2 From 053c525fcf976810f023d96472f414c0d5e6339b Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 8 Apr 2009 13:44:08 +0200 Subject: buffer: switch do_emergency_thaw() away from pdflush_operation() This is (again) a preparatory patch similar to commit a2a9537ac0b37a5da6fbe7e1e9cb06c524d2a9c4. It open codes a simple async way of executing do_thaw_all() out of context, so we can get rid of pdflush. Signed-off-by: Jens Axboe diff --git a/fs/buffer.c b/fs/buffer.c index 13edf7a..ff8bb1f 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -547,7 +547,7 @@ repeat: return err; } -void do_thaw_all(unsigned long unused) +void do_thaw_all(struct work_struct *work) { struct super_block *sb; char b[BDEVNAME_SIZE]; @@ -567,6 +567,7 @@ restart: goto restart; } spin_unlock(&sb_lock); + kfree(work); printk(KERN_WARNING "Emergency Thaw complete\n"); } @@ -577,7 +578,13 @@ restart: */ void emergency_thaw_all(void) { - pdflush_operation(do_thaw_all, 0); + struct work_struct *work; + + work = kmalloc(sizeof(*work), GFP_ATOMIC); + if (work) { + INIT_WORK(work, do_thaw_all); + schedule_work(work); + } } /** -- cgit v0.10.2 From d6ceb25e8d8bccf826848c2621a50d02c0a7f4ae Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 14 Apr 2009 14:18:16 +0200 Subject: cfq-iosched: don't delay queue kick for a merged request "Zhang, Yanmin" reports that commit b029195dda0129b427c6e579a3bb3ae752da3a93 introduced a regression of about 50% with sequential threaded read workloads. The test case is: tiotest -k0 -k1 -k3 -f 80 -t 32 which starts 32 threads each reading a 80MB file. Twiddle the kick queue logic so that we do start IO immediately, if it appears to be a fully merged request. We can't really detect that, so just check if the request is bigger than a page or not. The assumption is that since single bio issues will first queue a single request with just one page attached and then later do merges on that, if we already have more than a page worth of data in the request, then the request is most likely good to go. Verified that this doesn't cause a regression with the test case that commit b029195dda0129b427c6e579a3bb3ae752da3a93 was fixing. It does not, we still see maximum sized requests for the queue-then-merge cases. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index cba8a5d..56e9d85 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1903,10 +1903,17 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, * Remember that we saw a request from this process, but * don't start queuing just yet. Otherwise we risk seeing lots * of tiny requests, because we disrupt the normal plugging - * and merging. + * and merging. If the request is already larger than a single + * page, let it rip immediately. For that case we assume that + * merging is already done. */ - if (cfq_cfqq_wait_request(cfqq)) + if (cfq_cfqq_wait_request(cfqq)) { + if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE) { + del_timer(&cfqd->idle_slice_timer); + blk_start_queueing(cfqd->queue); + } cfq_mark_cfqq_must_dispatch(cfqq); + } } else if (cfq_should_preempt(cfqd, cfqq, rq)) { /* * not the active queue - expire current slice if it is -- cgit v0.10.2 From 2ec775e7053c82bc90858ede011b35aeb416995b Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Wed, 15 Apr 2009 10:16:24 +0200 Subject: [ALSA] intel8x0: add one retry to the ac97_clock measurement routine It seems that on some hardware platforms, the first measurement is wrong. This patch adds second measurement to this case. Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 10f8609..5dced5b 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -2676,12 +2676,13 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) struct ichdev *ichdev; unsigned long port; unsigned long pos, pos1, t; - int civ, timeout = 1000; + int civ, timeout = 1000, attempt = 1; struct timespec start_time, stop_time; if (chip->ac97_bus->clock != 48000) return; /* specified in module option */ + __again: subs = chip->pcm[0]->streams[0].substream; if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) { snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n"); @@ -2749,6 +2750,11 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) if (pos == 0) { snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n"); + __retry: + if (attempt < 2) { + attempt++; + goto __again; + } return; } @@ -2759,14 +2765,15 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos); if (t == 0) { snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n"); - return; + goto __retry; } pos *= 1000; pos = (pos / t) * 1000 + ((pos % t) * 1000) / t; - if (pos < 40000 || pos >= 60000) + if (pos < 40000 || pos >= 60000) { /* abnormal value. hw problem? */ printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos); - else if (pos > 40500 && pos < 41500) + goto __retry; + } else if (pos > 40500 && pos < 41500) /* first exception - 41000Hz reference clock */ chip->ac97_bus->clock = 41000; else if (pos > 43600 && pos < 44600) -- cgit v0.10.2 From 41609ff43005de11dadfb0ccadb344f0e2966829 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 14 Apr 2009 11:06:49 +0100 Subject: [ARM] 5449/1: S3C: Use disable_irq_nosync() to fix boot lockups With 2.6.30-rc1 on SMDK6410 I experience a soft lockup on bootup when the Samsung serial driver attempts to disable the transmit interrupt from within the transmit interrupt handler: it calls disable_irq() which locks up due to attempting to synchronise with the running handler. Fix this by using disable_irq_nosync(). Also make the same change in the recieve path. Backtrace: [] (__irq_svc+0x34/0x80) from [] (synchr) [] (synchronize_irq+0xc/0xcc) from [] (s) [] (s3c24xx_serial_stop_tx+0x1c/0x3c) from [] (s3c24xx_serial_tx_chars+0xf8/0x104) from [] (handle_IRQ_event+0x74/0x118) from []) [] (handle_level_irq+0x100/0x118) from [) [] (s3c_irq_demux_uart+0x94/0xc4) from [) [] (_text+0x50/0x6c) from [] (__irq_svc+) Signed-off-by: Mark Brown Acked-by: Ben Dooks Signed-off-by: Russell King diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 41ac948..e06686a 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -127,7 +127,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port) struct s3c24xx_uart_port *ourport = to_ourport(port); if (tx_enabled(port)) { - disable_irq(ourport->tx_irq); + disable_irq_nosync(ourport->tx_irq); tx_enabled(port) = 0; if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_enable(port); @@ -154,7 +154,7 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port) if (rx_enabled(port)) { dbg("s3c24xx_serial_stop_rx: port=%p\n", port); - disable_irq(ourport->rx_irq); + disable_irq_nosync(ourport->rx_irq); rx_enabled(port) = 0; } } -- cgit v0.10.2 From 7fccfc00c003c855936970facdbb667bae9dbe9a Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 14 Apr 2009 13:07:35 +0100 Subject: [ARM] 5450/1: Flush only the needed range when unmapping a VMA When unmapping N pages (e.g. shared memory) the amount of TLB flushes done can be (N*PAGE_SIZE/ZAP_BLOCK_SIZE)*N although it should be N at maximum. With PREEMPT kernel ZAP_BLOCK_SIZE is 8 pages, so there is a noticeable performance penalty when unmapping a large VMA and the system is spending its time in flush_tlb_range(). The problem is that tlb_end_vma() is always flushing the full VMA range. The subrange that needs to be flushed can be calculated by tlb_remove_tlb_entry(). This approach was suggested by Hugh Dickins, and is also used by other arches. The speed increase is roughly 3x for 8M mappings and for larger mappings even more. Signed-off-by: Aaro Koskinen Signed-off-by: Russell King diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 857f1df..321c83e 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -36,6 +36,8 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; + unsigned long range_start; + unsigned long range_end; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -63,7 +65,19 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) put_cpu_var(mmu_gathers); } -#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) +/* + * Memorize the range for the TLB flush. + */ +static inline void +tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) +{ + if (!tlb->fullmm) { + if (addr < tlb->range_start) + tlb->range_start = addr; + if (addr + PAGE_SIZE > tlb->range_end) + tlb->range_end = addr + PAGE_SIZE; + } +} /* * In the case of tlb vma handling, we can optimise these away in the @@ -73,15 +87,18 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) + if (!tlb->fullmm) { flush_cache_range(vma, vma->vm_start, vma->vm_end); + tlb->range_start = TASK_SIZE; + tlb->range_end = 0; + } } static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) - flush_tlb_range(vma, vma->vm_start, vma->vm_end); + if (!tlb->fullmm && tlb->range_end > 0) + flush_tlb_range(vma, tlb->range_start, tlb->range_end); } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -- cgit v0.10.2 From d5565f76d30a164570d883ab2e77a24b6b8686a0 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Tue, 14 Apr 2009 21:38:07 +0100 Subject: [ARM] 5451/1: ep93xx:core.c: build warning fix Fix trivial build warning due to incompatible pointer type. ep93xx_timer_interrupt() has the wrong return type causing a warning during the build. Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6d9152d..ae24486 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -100,7 +100,7 @@ static unsigned int last_jiffy_time; #define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) -static int ep93xx_timer_interrupt(int irq, void *dev_id) +static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) { __raw_writel(1, EP93XX_TIMER1_CLEAR); while ((signed long) -- cgit v0.10.2 From bfb53037c61ddf7c16a40297ad16f2bcbde534dc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 Apr 2009 14:51:04 +0200 Subject: ALSA: hda - Add quirk mask for Fujitsu Amilo laptops with ALC883 Added the models for quirk bitmask 1734:110x and 1734:113x of Fujitsu laptops. This will fix the model detection for Amilo Xa3540. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f35e58a..6ed787e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8742,10 +8742,9 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION), - SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550", + SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx", ALC883_FUJITSU_PI2515), - SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515), - SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530", + SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1130, "Fujitsu AMILO Xa35xx", ALC888_FUJITSU_XA3530), SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch), SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763), -- cgit v0.10.2 From 7fa5d20d1a5e60ef7e453993b67b26c87dc09f07 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 31 Mar 2009 15:49:08 +0100 Subject: GFS2: Make quotad's waiting interruptible So we don't count its D state in the loadavg. Reported-by: Nathan Straz Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index 8d53f66..47bc5cb 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -1364,7 +1364,7 @@ int gfs2_quotad(void *data) refrigerator(); t = min(quotad_timeo, statfs_timeo); - prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_UNINTERRUPTIBLE); + prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_INTERRUPTIBLE); spin_lock(&sdp->sd_trunc_lock); empty = list_empty(&sdp->sd_trunc_list); spin_unlock(&sdp->sd_trunc_lock); -- cgit v0.10.2 From 5cf32524de745c56e1411d63eccf23fef1709d73 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 31 Mar 2009 16:06:27 +0100 Subject: GFS2: Fix symlink creation race In certain cases symlinks can appear to have zero size if a lookup on the inode occurs within a certain (very short) time after the symlink has been created. The symlink is correctly created on disk but appears to have zero size when stat()ed. This patch closes the race and prevents incorrect sizes appearing. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c index abd5429..1c70fa5 100644 --- a/fs/gfs2/ops_inode.c +++ b/fs/gfs2/ops_inode.c @@ -371,6 +371,7 @@ static int gfs2_symlink(struct inode *dir, struct dentry *dentry, ip = ghs[1].gh_gl->gl_object; ip->i_disksize = size; + i_size_write(inode, size); error = gfs2_meta_inode_buffer(ip, &dibh); -- cgit v0.10.2 From a228df6339e0d385b8149c860d81b6007f5e9c81 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 7 Apr 2009 14:01:34 +0100 Subject: GFS2: Move umount flush rwsem The rwsem, used only on umount, is in the wrong place in glock.c. This patch moves it up a bit so that it does not get called under a spinlock. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 3984e47..1afd9f2 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -597,7 +597,6 @@ __acquires(&gl->gl_spin) GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags)); - down_read(&gfs2_umount_flush_sem); if (test_bit(GLF_DEMOTE, &gl->gl_flags) && gl->gl_demote_state != gl->gl_state) { if (find_first_holder(gl)) @@ -614,15 +613,14 @@ __acquires(&gl->gl_spin) if (ret == 0) goto out_unlock; if (ret == 2) - goto out_sem; + goto out; gh = find_first_waiter(gl); gl->gl_target = gh->gh_state; if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))) do_error(gl, 0); /* Fail queued try locks */ } do_xmote(gl, gh, gl->gl_target); -out_sem: - up_read(&gfs2_umount_flush_sem); +out: return; out_sched: @@ -631,7 +629,7 @@ out_sched: gfs2_glock_put(gl); out_unlock: clear_bit(GLF_LOCK, &gl->gl_flags); - goto out_sem; + goto out; } static void glock_work_func(struct work_struct *work) @@ -641,6 +639,7 @@ static void glock_work_func(struct work_struct *work) if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) finish_xmote(gl, gl->gl_reply); + down_read(&gfs2_umount_flush_sem); spin_lock(&gl->gl_spin); if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && @@ -653,6 +652,7 @@ static void glock_work_func(struct work_struct *work) } run_queue(gl, 0); spin_unlock(&gl->gl_spin); + up_read(&gfs2_umount_flush_sem); if (!delay || queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0) gfs2_glock_put(gl); -- cgit v0.10.2 From 10d2198805d7faa2b193485446ff6b1de42c9b78 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 7 Apr 2009 19:42:17 +0200 Subject: GFS2: cleanup file_operations mess Remove the weird pointer to file_operations mess and replace it with straight-forward defining of the lockinginstance names to the _nolock variants. Signed-off-by: Christoph Hellwig Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 7b277d44..5a31d42 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -137,15 +137,15 @@ void gfs2_set_iop(struct inode *inode) if (S_ISREG(mode)) { inode->i_op = &gfs2_file_iops; if (gfs2_localflocks(sdp)) - inode->i_fop = gfs2_file_fops_nolock; + inode->i_fop = &gfs2_file_fops_nolock; else - inode->i_fop = gfs2_file_fops; + inode->i_fop = &gfs2_file_fops; } else if (S_ISDIR(mode)) { inode->i_op = &gfs2_dir_iops; if (gfs2_localflocks(sdp)) - inode->i_fop = gfs2_dir_fops_nolock; + inode->i_fop = &gfs2_dir_fops_nolock; else - inode->i_fop = gfs2_dir_fops; + inode->i_fop = &gfs2_dir_fops; } else if (S_ISLNK(mode)) { inode->i_op = &gfs2_symlink_iops; } else { diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h index dca4fee..c30be2b 100644 --- a/fs/gfs2/inode.h +++ b/fs/gfs2/inode.h @@ -101,21 +101,23 @@ void gfs2_dinode_print(const struct gfs2_inode *ip); extern const struct inode_operations gfs2_file_iops; extern const struct inode_operations gfs2_dir_iops; extern const struct inode_operations gfs2_symlink_iops; -extern const struct file_operations *gfs2_file_fops_nolock; -extern const struct file_operations *gfs2_dir_fops_nolock; +extern const struct file_operations gfs2_file_fops_nolock; +extern const struct file_operations gfs2_dir_fops_nolock; extern void gfs2_set_inode_flags(struct inode *inode); #ifdef CONFIG_GFS2_FS_LOCKING_DLM -extern const struct file_operations *gfs2_file_fops; -extern const struct file_operations *gfs2_dir_fops; +extern const struct file_operations gfs2_file_fops; +extern const struct file_operations gfs2_dir_fops; + static inline int gfs2_localflocks(const struct gfs2_sbd *sdp) { return sdp->sd_args.ar_localflocks; } #else /* Single node only */ -#define gfs2_file_fops NULL -#define gfs2_dir_fops NULL +#define gfs2_file_fops gfs2_file_fops_nolock +#define gfs2_dir_fops gfs2_dir_fops_nolock + static inline int gfs2_localflocks(const struct gfs2_sbd *sdp) { return 1; diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/ops_file.c index 70b9b85..101caf3 100644 --- a/fs/gfs2/ops_file.c +++ b/fs/gfs2/ops_file.c @@ -705,7 +705,7 @@ static int gfs2_flock(struct file *file, int cmd, struct file_lock *fl) } } -const struct file_operations *gfs2_file_fops = &(const struct file_operations){ +const struct file_operations gfs2_file_fops = { .llseek = gfs2_llseek, .read = do_sync_read, .aio_read = generic_file_aio_read, @@ -723,7 +723,7 @@ const struct file_operations *gfs2_file_fops = &(const struct file_operations){ .setlease = gfs2_setlease, }; -const struct file_operations *gfs2_dir_fops = &(const struct file_operations){ +const struct file_operations gfs2_dir_fops = { .readdir = gfs2_readdir, .unlocked_ioctl = gfs2_ioctl, .open = gfs2_open, @@ -735,7 +735,7 @@ const struct file_operations *gfs2_dir_fops = &(const struct file_operations){ #endif /* CONFIG_GFS2_FS_LOCKING_DLM */ -const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operations){ +const struct file_operations gfs2_file_fops_nolock = { .llseek = gfs2_llseek, .read = do_sync_read, .aio_read = generic_file_aio_read, @@ -751,7 +751,7 @@ const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operat .setlease = generic_setlease, }; -const struct file_operations *gfs2_dir_fops_nolock = &(const struct file_operations){ +const struct file_operations gfs2_dir_fops_nolock = { .readdir = gfs2_readdir, .unlocked_ioctl = gfs2_ioctl, .open = gfs2_open, -- cgit v0.10.2 From 1328df725239804ae30fc7257c1a3185e679b517 Mon Sep 17 00:00:00 2001 From: Xu Gang Date: Tue, 14 Apr 2009 14:54:14 +0800 Subject: GFS2: Use DEFINE_SPINLOCK SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead. (as suggested in Documentation/spinlocks.txt) Signed-off-by: Xu Gang Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index 47bc5cb..152e6c4 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -81,7 +81,7 @@ struct gfs2_quota_change_host { static LIST_HEAD(qd_lru_list); static atomic_t qd_lru_count = ATOMIC_INIT(0); -static spinlock_t qd_lru_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(qd_lru_lock); int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask) { -- cgit v0.10.2 From 636d2f68a0814d84de26c021b2c15e3b4ffa29de Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 15 Apr 2009 02:26:49 -0700 Subject: myr10ge: again fix lro_gen_skb() alignment Add LRO alignment initially committed in 621544eb8c3beaa859c75850f816dd9b056a00a3 ("[LRO]: fix lro_gen_skb() alignment") and removed in 0dcffac1a329be69bab0ac604bf7283737108e68 ("myri10ge: add multislices support") during conversion to multi-slice. Signed-off-by: Stanislaw Gruszka Signed-off-by: David S. Miller diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 9eed126..f2c4a66 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -2447,6 +2447,7 @@ static int myri10ge_open(struct net_device *dev) lro_mgr->lro_arr = ss->rx_done.lro_desc; lro_mgr->get_frag_header = myri10ge_get_frag_header; lro_mgr->max_aggr = myri10ge_lro_max_pkts; + lro_mgr->frag_align_pad = 2; if (lro_mgr->max_aggr > MAX_SKB_FRAGS) lro_mgr->max_aggr = MAX_SKB_FRAGS; -- cgit v0.10.2 From cbea270714faae389c48c2901ee7988ecd62f664 Mon Sep 17 00:00:00 2001 From: Markus Brunner Date: Wed, 15 Apr 2009 02:35:40 -0700 Subject: gianfar: stop send queue before resetting gianfar After a transmit timed out, the reset task will be called, which will free the allocated resources(stop_gfar). If gfar_poll will be called before the resources get allocated again gfar_clean_tx_ring will call dev_kfree_skb_any(NULL). Example crash: ops: Kernel access of bad area, sig: 11 [#1] PREEMPT RSBBA100 Modules linked in: NIP: c01a10c4 LR: c013b254 CTR: c013c038 REGS: c02e7d20 TRAP: 0300 Not tainted (2.6.27.20) MSR: 00001032 CR: 24000082 XER: 20000000 DAR: 000000a0, DSISR: 20000000 TASK = c02ce578[0] 'swapper' THREAD: c02e6000 GPR00: 000000a0 c02e7dd0 c02ce578 00000000 00000040 00000001 c02ec1c0 00001032 GPR08: c080d1e0 df9ea800 00000000 00000000 24000082 ffffffff 0404f000 00000000 GPR16: ffffffbf ffffffff ffffffff ffdff7ff ffffffff c02d0fd4 00100100 00200200 GPR24: c031220c 00000001 00000001 00000000 00000000 df849800 ff109000 df849b80 NIP [c01a10c4] dev_kfree_skb_irq+0x18/0x70 LR [c013b254] gfar_clean_tx_ring+0x70/0x11c Call Trace: [c02e7dd0] [c003e978] update_wall_time+0x730/0x744 (unreliable) [c02e7df0] [c013b254] gfar_clean_tx_ring+0x70/0x11c [c02e7e10] [c013c07c] gfar_poll+0x44/0x150 [c02e7e30] [c01a064c] net_rx_action+0xa8/0x19c [c02e7e70] [c00251d4] __do_softirq+0x64/0xc0 [c02e7e90] [c0006384] do_softirq+0x40/0x58 [c02e7ea0] [c00250a8] irq_exit+0x40/0x9c [c02e7eb0] [c000642c] do_IRQ+0x90/0xac [c02e7ec0] [c0010ab4] ret_from_except+0x0/0x14 --- Exception: 501 at cpu_idle+0x9c/0xf8 LR = cpu_idle+0x9c/0xf8 [c02e7f80] [c0009820] cpu_idle+0x58/0xf8 (unreliable) [c02e7fa0] [c01fb8c8] __got2_end+0x7c/0x90 [c02e7fc0] [c026c794] start_kernel+0x2c0/0x2d4 [c02e7ff0] [00003438] 0x3438 Instruction dump: 7fa00124 80010024 bba10014 38210020 7c0803a6 4e800020 9421ffe0 7c0802a6 7c6b1b78 90010024 380300a0 bfa10014 <7d200028> 3129ffff 7d20012d 40a2fff4 Kernel panic - not syncing: Fatal exception in interrupt This Patch calls netif_stop_queue before calling stop_gfar. Signed-off-by: Markus Brunner Signed-off-by: David S. Miller diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 65f5587..b2c4967 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1583,8 +1583,10 @@ static void gfar_reset_task(struct work_struct *work) struct net_device *dev = priv->ndev; if (dev->flags & IFF_UP) { + netif_stop_queue(dev); stop_gfar(dev); startup_gfar(dev); + netif_start_queue(dev); } netif_tx_schedule_all(dev); -- cgit v0.10.2 From 83b2086ce2a1458168dc8b9d624060b2d7a82d4c Mon Sep 17 00:00:00 2001 From: Justin Mattock Date: Tue, 14 Apr 2009 14:31:21 -0700 Subject: ALSA: add missing definitions(letters) to HD-Audio.txt impact: Add missing definitions(letters). Signed-off-by: Justin P. Mattock Signed-off-by: Takashi Iwai diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index c5948f2..88b7433 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -169,7 +169,7 @@ PCI SSID look-up. What `model` option values are available depends on the codec chip. Check your codec chip from the codec proc file (see "Codec Proc-File" section below). It will show the vendor/product name of your codec -chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file, +chip. Then, see Documentation/sound/alsa/HD-Audio-Models.txt file, the section of HD-audio driver. You can find a list of codecs and `model` options belonging to each codec. For example, for Realtek ALC262 codec chip, pass `model=ultra` for devices that are compatible @@ -177,7 +177,7 @@ with Samsung Q1 Ultra. Thus, the first thing you can do for any brand-new, unsupported and non-working HD-audio hardware is to check HD-audio codec and several -different `model` option values. If you have a luck, some of them +different `model` option values. If you have any luck, some of them might suit with your device well. Some codecs such as ALC880 have a special model option `model=test`. -- cgit v0.10.2 From ed247e12fe5da4417602c3c0ce22932fb0f9cac1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 15 Apr 2009 03:04:56 -0700 Subject: sparc: remove some pointless conditionals before kfree() Remove some pointless conditionals before kfree(). Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c index 6ce5d25..adf5f27 100644 --- a/arch/sparc/kernel/ldc.c +++ b/arch/sparc/kernel/ldc.c @@ -1183,8 +1183,7 @@ out_free_txq: free_queue(lp->tx_num_entries, lp->tx_base); out_free_mssbuf: - if (mssbuf) - kfree(mssbuf); + kfree(mssbuf); out_free_iommu: ldc_iommu_release(lp); @@ -1217,8 +1216,7 @@ void ldc_free(struct ldc_channel *lp) hlist_del(&lp->list); - if (lp->mssbuf) - kfree(lp->mssbuf); + kfree(lp->mssbuf); ldc_iommu_release(lp); -- cgit v0.10.2 From 91e463c8f5f7a5b09d3d034c01a88567af60c504 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 13 Apr 2009 20:03:10 +0200 Subject: block: fix SG_IO to return a proper error value blk_rq_unmap_user() returns -EFAULT if a program passes an invalid address to kernel. SG_IO path needs to pass the returned value to user space instead of ignoring it. Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 626ee27..84b7f87 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -217,7 +217,7 @@ static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq, static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr, struct bio *bio) { - int ret = 0; + int r, ret = 0; /* * fill in all the output members @@ -242,7 +242,9 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr, ret = -EFAULT; } - blk_rq_unmap_user(bio); + r = blk_rq_unmap_user(bio); + if (!ret) + ret = r; blk_put_request(rq); return ret; -- cgit v0.10.2 From b3c2d2ddd63944ef2a1e4a43077b602288107e01 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:36 +0200 Subject: splice: split up __splice_from_pipe() Split up __splice_from_pipe() into four helper functions: splice_from_pipe_begin() splice_from_pipe_next() splice_from_pipe_feed() splice_from_pipe_end() splice_from_pipe_next() will wait (if necessary) for more buffers to be added to the pipe. splice_from_pipe_feed() will feed the buffers to the supplied actor and return when there's no more data available (or if all of the requested data has been copied). This is necessary so that implementations can do locking around the non-waiting splice_from_pipe_feed(). This patch should not cause any change in behavior. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe diff --git a/fs/splice.c b/fs/splice.c index c18aa7e..fd6b278 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -601,107 +601,176 @@ out: return ret; } +static void wakeup_pipe_writers(struct pipe_inode_info *pipe) +{ + smp_mb(); + if (waitqueue_active(&pipe->wait)) + wake_up_interruptible(&pipe->wait); + kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); +} + /** - * __splice_from_pipe - splice data from a pipe to given actor + * splice_from_pipe_feed - feed available data from a pipe to a file * @pipe: pipe to splice from * @sd: information to @actor * @actor: handler that splices the data * * Description: - * This function does little more than loop over the pipe and call - * @actor to do the actual moving of a single struct pipe_buffer to - * the desired destination. See pipe_to_file, pipe_to_sendpage, or - * pipe_to_user. + + * This function loops over the pipe and calls @actor to do the + * actual moving of a single struct pipe_buffer to the desired + * destination. It returns when there's no more buffers left in + * the pipe or if the requested number of bytes (@sd->total_len) + * have been copied. It returns a positive number (one) if the + * pipe needs to be filled with more data, zero if the required + * number of bytes have been copied and -errno on error. * + * This, together with splice_from_pipe_{begin,end,next}, may be + * used to implement the functionality of __splice_from_pipe() when + * locking is required around copying the pipe buffers to the + * destination. */ -ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd, - splice_actor *actor) +int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd, + splice_actor *actor) { - int ret, do_wakeup, err; - - ret = 0; - do_wakeup = 0; - - for (;;) { - if (pipe->nrbufs) { - struct pipe_buffer *buf = pipe->bufs + pipe->curbuf; - const struct pipe_buf_operations *ops = buf->ops; + int ret; - sd->len = buf->len; - if (sd->len > sd->total_len) - sd->len = sd->total_len; + while (pipe->nrbufs) { + struct pipe_buffer *buf = pipe->bufs + pipe->curbuf; + const struct pipe_buf_operations *ops = buf->ops; - err = actor(pipe, buf, sd); - if (err <= 0) { - if (!ret && err != -ENODATA) - ret = err; + sd->len = buf->len; + if (sd->len > sd->total_len) + sd->len = sd->total_len; - break; - } + ret = actor(pipe, buf, sd); + if (ret <= 0) { + if (ret == -ENODATA) + ret = 0; + return ret; + } + buf->offset += ret; + buf->len -= ret; - ret += err; - buf->offset += err; - buf->len -= err; + sd->num_spliced += ret; + sd->len -= ret; + sd->pos += ret; + sd->total_len -= ret; - sd->len -= err; - sd->pos += err; - sd->total_len -= err; - if (sd->len) - continue; + if (!buf->len) { + buf->ops = NULL; + ops->release(pipe, buf); + pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1); + pipe->nrbufs--; + if (pipe->inode) + sd->need_wakeup = true; + } - if (!buf->len) { - buf->ops = NULL; - ops->release(pipe, buf); - pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1); - pipe->nrbufs--; - if (pipe->inode) - do_wakeup = 1; - } + if (!sd->total_len) + return 0; + } - if (!sd->total_len) - break; - } + return 1; +} +EXPORT_SYMBOL(splice_from_pipe_feed); - if (pipe->nrbufs) - continue; +/** + * splice_from_pipe_next - wait for some data to splice from + * @pipe: pipe to splice from + * @sd: information about the splice operation + * + * Description: + * This function will wait for some data and return a positive + * value (one) if pipe buffers are available. It will return zero + * or -errno if no more data needs to be spliced. + */ +int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd) +{ + while (!pipe->nrbufs) { if (!pipe->writers) - break; - if (!pipe->waiting_writers) { - if (ret) - break; - } + return 0; - if (sd->flags & SPLICE_F_NONBLOCK) { - if (!ret) - ret = -EAGAIN; - break; - } + if (!pipe->waiting_writers && sd->num_spliced) + return 0; - if (signal_pending(current)) { - if (!ret) - ret = -ERESTARTSYS; - break; - } + if (sd->flags & SPLICE_F_NONBLOCK) + return -EAGAIN; - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible_sync(&pipe->wait); - kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); - do_wakeup = 0; + if (signal_pending(current)) + return -ERESTARTSYS; + + if (sd->need_wakeup) { + wakeup_pipe_writers(pipe); + sd->need_wakeup = false; } pipe_wait(pipe); } - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible(&pipe->wait); - kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); - } + return 1; +} +EXPORT_SYMBOL(splice_from_pipe_next); - return ret; +/** + * splice_from_pipe_begin - start splicing from pipe + * @pipe: pipe to splice from + * + * Description: + * This function should be called before a loop containing + * splice_from_pipe_next() and splice_from_pipe_feed() to + * initialize the necessary fields of @sd. + */ +void splice_from_pipe_begin(struct splice_desc *sd) +{ + sd->num_spliced = 0; + sd->need_wakeup = false; +} +EXPORT_SYMBOL(splice_from_pipe_begin); + +/** + * splice_from_pipe_end - finish splicing from pipe + * @pipe: pipe to splice from + * @sd: information about the splice operation + * + * Description: + * This function will wake up pipe writers if necessary. It should + * be called after a loop containing splice_from_pipe_next() and + * splice_from_pipe_feed(). + */ +void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd) +{ + if (sd->need_wakeup) + wakeup_pipe_writers(pipe); +} +EXPORT_SYMBOL(splice_from_pipe_end); + +/** + * __splice_from_pipe - splice data from a pipe to given actor + * @pipe: pipe to splice from + * @sd: information to @actor + * @actor: handler that splices the data + * + * Description: + * This function does little more than loop over the pipe and call + * @actor to do the actual moving of a single struct pipe_buffer to + * the desired destination. See pipe_to_file, pipe_to_sendpage, or + * pipe_to_user. + * + */ +ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd, + splice_actor *actor) +{ + int ret; + + splice_from_pipe_begin(sd); + do { + ret = splice_from_pipe_next(pipe, sd); + if (ret > 0) + ret = splice_from_pipe_feed(pipe, sd, actor); + } while (ret > 0); + splice_from_pipe_end(pipe, sd); + + return sd->num_spliced ? sd->num_spliced : ret; } EXPORT_SYMBOL(__splice_from_pipe); diff --git a/include/linux/splice.h b/include/linux/splice.h index 528dcb9..8fc2a63 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -36,6 +36,8 @@ struct splice_desc { void *data; /* cookie */ } u; loff_t pos; /* file position */ + size_t num_spliced; /* number of bytes already spliced */ + bool need_wakeup; /* need to wake up writer */ }; struct partial_page { @@ -66,6 +68,14 @@ extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *, splice_actor *); extern ssize_t __splice_from_pipe(struct pipe_inode_info *, struct splice_desc *, splice_actor *); +extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *, + splice_actor *); +extern int splice_from_pipe_next(struct pipe_inode_info *, + struct splice_desc *); +extern void splice_from_pipe_begin(struct splice_desc *); +extern void splice_from_pipe_end(struct pipe_inode_info *, + struct splice_desc *); + extern ssize_t splice_to_pipe(struct pipe_inode_info *, struct splice_pipe_desc *); extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *, -- cgit v0.10.2 From 2933970b960223076d6affcf7a77e2bc546b8102 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:37 +0200 Subject: splice: remove i_mutex locking in splice_from_pipe() splice_from_pipe() is only called from two places: - generic_splice_sendpage() - splice_write_null() Neither of these require i_mutex to be taken on the destination inode. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe diff --git a/fs/splice.c b/fs/splice.c index fd6b278..349576b 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -784,7 +784,7 @@ EXPORT_SYMBOL(__splice_from_pipe); * @actor: handler that splices the data * * Description: - * See __splice_from_pipe. This function locks the input and output inodes, + * See __splice_from_pipe. This function locks the pipe inode, * otherwise it's identical to __splice_from_pipe(). * */ @@ -793,7 +793,6 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, splice_actor *actor) { ssize_t ret; - struct inode *inode = out->f_mapping->host; struct splice_desc sd = { .total_len = len, .flags = flags, @@ -801,24 +800,11 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, .u.file = out, }; - /* - * The actor worker might be calling ->write_begin and - * ->write_end. Most of the time, these expect i_mutex to - * be held. Since this may result in an ABBA deadlock with - * pipe->inode, we have to order lock acquiry here. - * - * Outer lock must be inode->i_mutex, as pipe_wait() will - * release and reacquire pipe->inode->i_mutex, AND inode must - * never be a pipe. - */ - WARN_ON(S_ISFIFO(inode->i_mode)); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); + mutex_lock(&pipe->inode->i_mutex); ret = __splice_from_pipe(pipe, &sd, actor); if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); - mutex_unlock(&inode->i_mutex); return ret; } -- cgit v0.10.2 From eb443e5a25d43996deb62b9bcee1a4ce5dea2ead Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:38 +0200 Subject: splice: fix i_mutex locking in generic_splice_write() Rearrange locking of i_mutex on destination so it's only held while buffers are copied with the pipe_to_file() actor, and not while waiting for more data on the pipe. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe diff --git a/fs/splice.c b/fs/splice.c index 349576b..a1f595b 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -895,17 +895,29 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, }; ssize_t ret; - WARN_ON(S_ISFIFO(inode->i_mode)); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); - ret = file_remove_suid(out); - if (likely(!ret)) { - if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); - ret = __splice_from_pipe(pipe, &sd, pipe_to_file); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); - } - mutex_unlock(&inode->i_mutex); + if (pipe->inode) + mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT); + + splice_from_pipe_begin(&sd); + do { + ret = splice_from_pipe_next(pipe, &sd); + if (ret <= 0) + break; + + mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD); + ret = file_remove_suid(out); + if (!ret) + ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file); + mutex_unlock(&inode->i_mutex); + } while (ret > 0); + splice_from_pipe_end(pipe, &sd); + + if (pipe->inode) + mutex_unlock(&pipe->inode->i_mutex); + + if (sd.num_spliced) + ret = sd.num_spliced; + if (ret > 0) { unsigned long nr_pages; -- cgit v0.10.2 From 328eaaba4e41a04c1dc4679d65bea3fee4349d86 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:39 +0200 Subject: ocfs2: fix i_mutex locking in ocfs2_splice_to_file() Rearrange locking of i_mutex on destination and call to ocfs2_rw_lock() so locks are only held while buffers are copied with the pipe_to_file() actor, and not while waiting for more data on the pipe. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 8672b95..c2a87c8 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1912,6 +1912,22 @@ out_sems: return written ? written : ret; } +static int ocfs2_splice_to_file(struct pipe_inode_info *pipe, + struct file *out, + struct splice_desc *sd) +{ + int ret; + + ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos, + sd->total_len, 0, NULL); + if (ret < 0) { + mlog_errno(ret); + return ret; + } + + return splice_from_pipe_feed(pipe, sd, pipe_to_file); +} + static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, @@ -1919,38 +1935,76 @@ static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, unsigned int flags) { int ret; - struct inode *inode = out->f_path.dentry->d_inode; + struct address_space *mapping = out->f_mapping; + struct inode *inode = mapping->host; + struct splice_desc sd = { + .total_len = len, + .flags = flags, + .pos = *ppos, + .u.file = out, + }; mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe, (unsigned int)len, out->f_path.dentry->d_name.len, out->f_path.dentry->d_name.name); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); + if (pipe->inode) + mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT); - ret = ocfs2_rw_lock(inode, 1); - if (ret < 0) { - mlog_errno(ret); - goto out; - } + splice_from_pipe_begin(&sd); + do { + ret = splice_from_pipe_next(pipe, &sd); + if (ret <= 0) + break; - ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0, - NULL); - if (ret < 0) { - mlog_errno(ret); - goto out_unlock; - } + mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD); + ret = ocfs2_rw_lock(inode, 1); + if (ret < 0) + mlog_errno(ret); + else { + ret = ocfs2_splice_to_file(pipe, out, &sd); + ocfs2_rw_unlock(inode, 1); + } + mutex_unlock(&inode->i_mutex); + } while (ret > 0); + splice_from_pipe_end(pipe, &sd); if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); - ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags); - if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); -out_unlock: - ocfs2_rw_unlock(inode, 1); -out: - mutex_unlock(&inode->i_mutex); + if (sd.num_spliced) + ret = sd.num_spliced; + + if (ret > 0) { + unsigned long nr_pages; + + *ppos += ret; + nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; + + /* + * If file or inode is SYNC and we actually wrote some data, + * sync it. + */ + if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) { + int err; + + mutex_lock(&inode->i_mutex); + err = ocfs2_rw_lock(inode, 1); + if (err < 0) { + mlog_errno(err); + } else { + err = generic_osync_inode(inode, mapping, + OSYNC_METADATA|OSYNC_DATA); + ocfs2_rw_unlock(inode, 1); + } + mutex_unlock(&inode->i_mutex); + + if (err) + ret = err; + } + balance_dirty_pages_ratelimited_nr(mapping, nr_pages); + } mlog_exit(ret); return ret; diff --git a/fs/splice.c b/fs/splice.c index a1f595b..584b2b7 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -555,8 +555,8 @@ static int pipe_to_sendpage(struct pipe_inode_info *pipe, * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create * a new page in the output file page cache and fill/dirty that. */ -static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, - struct splice_desc *sd) +int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, + struct splice_desc *sd) { struct file *file = sd->u.file; struct address_space *mapping = file->f_mapping; @@ -600,6 +600,7 @@ static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, out: return ret; } +EXPORT_SYMBOL(pipe_to_file); static void wakeup_pipe_writers(struct pipe_inode_info *pipe) { diff --git a/include/linux/splice.h b/include/linux/splice.h index 8fc2a63..5f3faa9 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -75,6 +75,8 @@ extern int splice_from_pipe_next(struct pipe_inode_info *, extern void splice_from_pipe_begin(struct splice_desc *); extern void splice_from_pipe_end(struct pipe_inode_info *, struct splice_desc *); +extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *, + struct splice_desc *); extern ssize_t splice_to_pipe(struct pipe_inode_info *, struct splice_pipe_desc *); -- cgit v0.10.2 From f8cc774ce4844811a55e2352f1443055e3994e28 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:40 +0200 Subject: splice: remove generic_file_splice_write_nolock() Remove the now unused generic_file_splice_write_nolock() function. It's conceptually broken anyway, because splice may need to wait for pipe events so holding locks across the whole operation is wrong. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe diff --git a/fs/splice.c b/fs/splice.c index 584b2b7..128ee36 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -811,65 +811,6 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, } /** - * generic_file_splice_write_nolock - generic_file_splice_write without mutexes - * @pipe: pipe info - * @out: file to write to - * @ppos: position in @out - * @len: number of bytes to splice - * @flags: splice modifier flags - * - * Description: - * Will either move or copy pages (determined by @flags options) from - * the given pipe inode to the given file. The caller is responsible - * for acquiring i_mutex on both inodes. - * - */ -ssize_t -generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out, - loff_t *ppos, size_t len, unsigned int flags) -{ - struct address_space *mapping = out->f_mapping; - struct inode *inode = mapping->host; - struct splice_desc sd = { - .total_len = len, - .flags = flags, - .pos = *ppos, - .u.file = out, - }; - ssize_t ret; - int err; - - err = file_remove_suid(out); - if (unlikely(err)) - return err; - - ret = __splice_from_pipe(pipe, &sd, pipe_to_file); - if (ret > 0) { - unsigned long nr_pages; - - *ppos += ret; - nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; - - /* - * If file or inode is SYNC and we actually wrote some data, - * sync it. - */ - if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) { - err = generic_osync_inode(inode, mapping, - OSYNC_METADATA|OSYNC_DATA); - - if (err) - ret = err; - } - balance_dirty_pages_ratelimited_nr(mapping, nr_pages); - } - - return ret; -} - -EXPORT_SYMBOL(generic_file_splice_write_nolock); - -/** * generic_file_splice_write - splice data from a pipe to a file * @pipe: pipe info * @out: file to write to diff --git a/include/linux/fs.h b/include/linux/fs.h index b535aec4..907d8f5 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2209,8 +2209,6 @@ extern ssize_t generic_file_splice_read(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int); extern ssize_t generic_file_splice_write(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); -extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *, - struct file *, loff_t *, size_t, unsigned int); extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *, size_t len, unsigned int flags); extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, -- cgit v0.10.2 From 61e0d47c33cc371f725bcda4a47ae0efe652dba8 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:41 +0200 Subject: splice: add helpers for locking pipe inode There are lots of sequences like this, especially in splice code: if (pipe->inode) mutex_lock(&pipe->inode->i_mutex); /* do something */ if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); so introduce helpers which do the conditional locking and unlocking. Also replace the inode_double_lock() call with a pipe_double_lock() helper to avoid spreading the use of this functionality beyond the pipe code. This patch is just a cleanup, and should cause no behavioral changes. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe diff --git a/fs/inode.c b/fs/inode.c index d06d6d2..6ad14a1 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1470,42 +1470,6 @@ static void __wait_on_freeing_inode(struct inode *inode) spin_lock(&inode_lock); } -/* - * We rarely want to lock two inodes that do not have a parent/child - * relationship (such as directory, child inode) simultaneously. The - * vast majority of file systems should be able to get along fine - * without this. Do not use these functions except as a last resort. - */ -void inode_double_lock(struct inode *inode1, struct inode *inode2) -{ - if (inode1 == NULL || inode2 == NULL || inode1 == inode2) { - if (inode1) - mutex_lock(&inode1->i_mutex); - else if (inode2) - mutex_lock(&inode2->i_mutex); - return; - } - - if (inode1 < inode2) { - mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT); - mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD); - } else { - mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT); - mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD); - } -} -EXPORT_SYMBOL(inode_double_lock); - -void inode_double_unlock(struct inode *inode1, struct inode *inode2) -{ - if (inode1) - mutex_unlock(&inode1->i_mutex); - - if (inode2 && inode2 != inode1) - mutex_unlock(&inode2->i_mutex); -} -EXPORT_SYMBOL(inode_double_unlock); - static __initdata unsigned long ihash_entries; static int __init set_ihash_entries(char *str) { diff --git a/fs/pipe.c b/fs/pipe.c index 4af7aa5..13414ec 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -37,6 +37,42 @@ * -- Manfred Spraul 2002-05-09 */ +static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass) +{ + if (pipe->inode) + mutex_lock_nested(&pipe->inode->i_mutex, subclass); +} + +void pipe_lock(struct pipe_inode_info *pipe) +{ + /* + * pipe_lock() nests non-pipe inode locks (for writing to a file) + */ + pipe_lock_nested(pipe, I_MUTEX_PARENT); +} +EXPORT_SYMBOL(pipe_lock); + +void pipe_unlock(struct pipe_inode_info *pipe) +{ + if (pipe->inode) + mutex_unlock(&pipe->inode->i_mutex); +} +EXPORT_SYMBOL(pipe_unlock); + +void pipe_double_lock(struct pipe_inode_info *pipe1, + struct pipe_inode_info *pipe2) +{ + BUG_ON(pipe1 == pipe2); + + if (pipe1 < pipe2) { + pipe_lock_nested(pipe1, I_MUTEX_PARENT); + pipe_lock_nested(pipe2, I_MUTEX_CHILD); + } else { + pipe_lock_nested(pipe2, I_MUTEX_CHILD); + pipe_lock_nested(pipe1, I_MUTEX_PARENT); + } +} + /* Drop the inode semaphore and wait for a pipe event, atomically */ void pipe_wait(struct pipe_inode_info *pipe) { @@ -47,12 +83,10 @@ void pipe_wait(struct pipe_inode_info *pipe) * is considered a noninteractive wait: */ prepare_to_wait(&pipe->wait, &wait, TASK_INTERRUPTIBLE); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); schedule(); finish_wait(&pipe->wait, &wait); - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); } static int diff --git a/fs/splice.c b/fs/splice.c index 128ee36..5384a90 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -182,8 +182,7 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe, do_wakeup = 0; page_nr = 0; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); for (;;) { if (!pipe->readers) { @@ -245,15 +244,13 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe, pipe->waiting_writers--; } - if (pipe->inode) { - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible(&pipe->wait); - kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); - } + if (do_wakeup) { + smp_mb(); + if (waitqueue_active(&pipe->wait)) + wake_up_interruptible(&pipe->wait); + kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); } while (page_nr < spd_pages) @@ -801,11 +798,9 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, .u.file = out, }; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); ret = __splice_from_pipe(pipe, &sd, actor); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -837,8 +832,7 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, }; ssize_t ret; - if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT); + pipe_lock(pipe); splice_from_pipe_begin(&sd); do { @@ -854,8 +848,7 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, } while (ret > 0); splice_from_pipe_end(pipe, &sd); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); if (sd.num_spliced) ret = sd.num_spliced; @@ -1348,8 +1341,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov, if (!pipe) return -EBADF; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); error = ret = 0; while (nr_segs) { @@ -1404,8 +1396,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov, iov++; } - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); if (!ret) ret = error; @@ -1533,7 +1524,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags) return 0; ret = 0; - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); while (!pipe->nrbufs) { if (signal_pending(current)) { @@ -1551,7 +1542,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags) pipe_wait(pipe); } - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -1571,7 +1562,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags) return 0; ret = 0; - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); while (pipe->nrbufs >= PIPE_BUFFERS) { if (!pipe->readers) { @@ -1592,7 +1583,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags) pipe->waiting_writers--; } - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -1608,10 +1599,10 @@ static int link_pipe(struct pipe_inode_info *ipipe, /* * Potential ABBA deadlock, work around it by ordering lock - * grabbing by inode address. Otherwise two different processes + * grabbing by pipe info address. Otherwise two different processes * could deadlock (one doing tee from A -> B, the other from B -> A). */ - inode_double_lock(ipipe->inode, opipe->inode); + pipe_double_lock(ipipe, opipe); do { if (!opipe->readers) { @@ -1662,7 +1653,8 @@ static int link_pipe(struct pipe_inode_info *ipipe, if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK)) ret = -EAGAIN; - inode_double_unlock(ipipe->inode, opipe->inode); + pipe_unlock(ipipe); + pipe_unlock(opipe); /* * If we put data in the output pipe, wakeup any potential readers. diff --git a/include/linux/fs.h b/include/linux/fs.h index 907d8f5..e766be0 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -797,9 +797,6 @@ enum inode_i_mutex_lock_class I_MUTEX_QUOTA }; -extern void inode_double_lock(struct inode *inode1, struct inode *inode2); -extern void inode_double_unlock(struct inode *inode1, struct inode *inode2); - /* * NOTE: in a 32bit arch with a preemptable kernel and * an UP compile the i_size_read/write must be atomic diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 8e41202..c8f0385 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -134,6 +134,11 @@ struct pipe_buf_operations { memory allocation, whereas PIPE_BUF makes atomicity guarantees. */ #define PIPE_SIZE PAGE_SIZE +/* Pipe lock and unlock operations */ +void pipe_lock(struct pipe_inode_info *); +void pipe_unlock(struct pipe_inode_info *); +void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *); + /* Drop the inode semaphore and wait for a pipe event, atomically */ void pipe_wait(struct pipe_inode_info *pipe); -- cgit v0.10.2 From 86c824b9434e764d01489688e4e38aee43b93fcf Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 15 Apr 2009 09:00:07 +0200 Subject: bio: add documentation to bio_alloc() Explain that with __GFP_WAIT set it will not fail, and that the caller must never allocate more than 1 bio at the time. Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index e0c9e54..cd42bb8 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -348,6 +348,24 @@ err: return NULL; } +/** + * bio_alloc - allocate a bio for I/O + * @gfp_mask: the GFP_ mask given to the slab allocator + * @nr_iovecs: number of iovecs to pre-allocate + * + * Description: + * bio_alloc will allocate a bio and associated bio_vec array that can hold + * at least @nr_iovecs entries. Allocations will be done from the + * fs_bio_set. Also see @bio_alloc_bioset. + * + * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate + * a bio. This is due to the mempool guarantees. To make this work, callers + * must never allocate more than 1 bio at the time from this pool. Callers + * that need to allocate more than 1 bio must always submit the previously + * allocate bio for IO before attempting to allocate a new one. Failure to + * do so can cause livelocks under memory pressure. + * + **/ struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) { struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); -- cgit v0.10.2 From 15afd1cc7b624e1c94fdf824ec5af611050b150c Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Wed, 15 Apr 2009 10:35:31 +0530 Subject: block: Remove code handling bio_alloc failure with __GFP_WAIT Remove code handling bio_alloc failure with __GFP_WAIT. GFP_KERNEL implies __GFP_WAIT. Signed-off-by: Nikanth Karthikesan Signed-off-by: Jens Axboe diff --git a/block/blk-barrier.c b/block/blk-barrier.c index f7dae57..20b4111 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -319,9 +319,6 @@ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector) return -ENXIO; bio = bio_alloc(GFP_KERNEL, 0); - if (!bio) - return -ENOMEM; - bio->bi_end_io = bio_end_empty_barrier; bio->bi_private = &wait; bio->bi_bdev = bdev; diff --git a/block/ioctl.c b/block/ioctl.c index 0f22e62..ad474d4 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -146,8 +146,6 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start, struct bio *bio; bio = bio_alloc(GFP_KERNEL, 0); - if (!bio) - return -ENOMEM; bio->bi_end_io = blk_ioc_discard_endio; bio->bi_bdev = bdev; -- cgit v0.10.2 From 4d1f9fdb6177a9bdecf26976337dd39abcc8edbc Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Wed, 15 Apr 2009 10:35:52 +0530 Subject: dio: Remove code handling bio_alloc failure with __GFP_WAIT Remove code handling bio_alloc failure with __GFP_WAIT. GFP_KERNEL implies __GFP_WAIT. Signed-off-by: Nikanth Karthikesan Signed-off-by: Jens Axboe diff --git a/fs/direct-io.c b/fs/direct-io.c index da258e7..05763bb 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -307,8 +307,6 @@ dio_bio_alloc(struct dio *dio, struct block_device *bdev, struct bio *bio; bio = bio_alloc(GFP_KERNEL, nr_vecs); - if (bio == NULL) - return -ENOMEM; bio->bi_bdev = bdev; bio->bi_sector = first_sector; -- cgit v0.10.2 From 226e7dabf5534722944adefbad01970bd38bb7ae Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Wed, 15 Apr 2009 10:36:16 +0530 Subject: ext4: Remove code handling bio_alloc failure with __GFP_WAIT Remove code handling bio_alloc failure with __GFP_WAIT. GFP_NOIO implies __GFP_WAIT. Signed-off-by: Nikanth Karthikesan Signed-off-by: Jens Axboe diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 6132353..2a1cb09 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2416,8 +2416,6 @@ static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex) len = ee_len; bio = bio_alloc(GFP_NOIO, len); - if (!bio) - return -ENOMEM; bio->bi_sector = ee_pblock; bio->bi_bdev = inode->i_sb->s_bdev; -- cgit v0.10.2 From b1fffc9ca6ca4c3feef3a7e8405252d528d312dc Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Wed, 15 Apr 2009 10:36:35 +0530 Subject: gfs2: Remove code handling bio_alloc failure with __GFP_WAIT Remove code handling bio_alloc failure with __GFP_WAIT. GFP_NOFS implies __GFP_WAIT. Signed-off-by: Nikanth Karthikesan Acked-by: Steven Whitehouse Signed-off-by: Jens Axboe diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 51883b3..650a730 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -272,11 +272,6 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector) lock_page(page); bio = bio_alloc(GFP_NOFS, 1); - if (unlikely(!bio)) { - __free_page(page); - return -ENOBUFS; - } - bio->bi_sector = sector * (sb->s_blocksize >> 9); bio->bi_bdev = sb->s_bdev; bio_add_page(bio, page, PAGE_SIZE, 0); -- cgit v0.10.2 From 297dbf50d7ab0539cf9cf7f2a66918665a18e45e Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Wed, 15 Apr 2009 10:37:04 +0530 Subject: swap: Remove code handling bio_alloc failure with __GFP_WAIT Remove code handling bio_alloc failure with __GFP_WAIT. Signed-off-by: Nikanth Karthikesan Signed-off-by: Jens Axboe diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 505f319..8ba052c 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -64,8 +64,6 @@ static int submit(int rw, pgoff_t page_off, struct page *page, struct bio *bio; bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1); - if (!bio) - return -ENOMEM; bio->bi_sector = page_off * (PAGE_SIZE >> 9); bio->bi_bdev = resume_bdev; bio->bi_end_io = end_swap_bio_read; -- cgit v0.10.2 From dfbc4752eab33e66f113f9daa2effbe241cd661d Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 15 Apr 2009 10:27:07 +0200 Subject: brd: support barriers brd is always ordered (not that it matters, as it is defined not to survive when the system goes down). So tell the block layer it is ordered, which might be of help with testing filesystems. Signed-off-by: Nick Piggin Signed-off-by: Jens Axboe diff --git a/drivers/block/brd.c b/drivers/block/brd.c index bdd4f5f..ee8ed68 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -436,6 +436,7 @@ static struct brd_device *brd_alloc(int i) if (!brd->brd_queue) goto out_free_dev; blk_queue_make_request(brd->brd_queue, brd_make_request); + blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL); blk_queue_max_sectors(brd->brd_queue, 1024); blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY); -- cgit v0.10.2 From c2572f2b4ffc27ba79211aceee3bef53a59bb5cd Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 15 Apr 2009 10:32:07 +0200 Subject: brd: fix cacheflushing brd is missing a flush_dcache_page. On 2nd thoughts, perhaps it is the pagecache's responsibility to flush user virtual aliases (the driver of course should flush kernel virtual mappings)... but anyway, there already exists cache flushing for one direction of transfer, so we should add the other. Signed-off-by: Nick Piggin Signed-off-by: Jens Axboe diff --git a/drivers/block/brd.c b/drivers/block/brd.c index ee8ed68..5f7e64b 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -275,8 +275,10 @@ static int brd_do_bvec(struct brd_device *brd, struct page *page, if (rw == READ) { copy_from_brd(mem + off, brd, sector, len); flush_dcache_page(page); - } else + } else { + flush_dcache_page(page); copy_to_brd(brd, mem + off, sector, len); + } kunmap_atomic(mem, KM_USER0); out: -- cgit v0.10.2 From 40bb54d197a10fe86d73073ee8202ba2812a05fa Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 15 Apr 2009 12:11:10 +0200 Subject: cfq-iosched: no need to save interrupts in cfq_kick_queue() It's called from the workqueue handlers from process context, so we always have irqs enabled when entered. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 56e9d85..e59f210 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2157,11 +2157,10 @@ static void cfq_kick_queue(struct work_struct *work) struct cfq_data *cfqd = container_of(work, struct cfq_data, unplug_work); struct request_queue *q = cfqd->queue; - unsigned long flags; - spin_lock_irqsave(q->queue_lock, flags); + spin_lock_irq(q->queue_lock); blk_start_queueing(q); - spin_unlock_irqrestore(q->queue_lock, flags); + spin_unlock_irq(q->queue_lock); } /* -- cgit v0.10.2 From 2d870722965211de072bb36b446a4df99dae07e1 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 15 Apr 2009 12:12:46 +0200 Subject: cfq-iosched: tweak kick logic a bit more We only kick the dispatch for an idling queue, if we think it's a (somewhat) fully merged request. Also allow a kick if we have other busy queues in the system, since we don't want to risk waiting for a potential merge in that case. It's better to get some work done and proceed. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index e59f210..579f318 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1905,10 +1905,13 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, * of tiny requests, because we disrupt the normal plugging * and merging. If the request is already larger than a single * page, let it rip immediately. For that case we assume that - * merging is already done. + * merging is already done. Ditto for a busy system that + * has other work pending, don't risk delaying until the + * idle timer unplug to continue working. */ if (cfq_cfqq_wait_request(cfqq)) { - if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE) { + if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE || + cfqd->busy_queues > 1) { del_timer(&cfqd->idle_slice_timer); blk_start_queueing(cfqd->queue); } -- cgit v0.10.2 From 9481ffdc61738a91baf0f8b7fb20922768ae1b8e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 15 Apr 2009 12:14:13 +0200 Subject: cfq-iosched: log responsible 'cfqq' in idle timer arm Makes it easier to read the traces. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 579f318..090a4ee 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -936,7 +936,7 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd) sl = min(sl, msecs_to_jiffies(CFQ_MIN_TT)); mod_timer(&cfqd->idle_slice_timer, jiffies + sl); - cfq_log(cfqd, "arm_idle: %lu", sl); + cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl); } /* -- cgit v0.10.2 From a36e71f996e25d6213f57951f7ae1874086ec57e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 15 Apr 2009 12:15:11 +0200 Subject: cfq-iosched: add close cooperator code If we have processes that are working in close proximity to each other on disk, we don't want to idle wait. Instead allow the close process to issue a request, getting better aggregate bandwidth. The anticipatory scheduler has similar checks, noop and deadline do not need it since they don't care about process <-> io mappings. The code for CFQ is a little more involved though, since we split request queues into per-process contexts. This fixes a performance problem with eg dump(8), since it uses several processes in some silly attempt to speed IO up. Even if dump(8) isn't really a valid case (it should be fixed by using CLONE_IO), there are other cases where we see close processes and where idling ends up hurting performance. Credit goes to Jeff Moyer for writing the initial implementation. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 090a4ee..0d3b70d 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -80,6 +80,14 @@ struct cfq_data { * rr list of queues with requests and the count of them */ struct cfq_rb_root service_tree; + + /* + * Each priority tree is sorted by next_request position. These + * trees are used when determining if two or more queues are + * interleaving requests (see cfq_close_cooperator). + */ + struct rb_root prio_trees[CFQ_PRIO_LISTS]; + unsigned int busy_queues; /* * Used to track any pending rt requests so we can pre-empt current @@ -144,6 +152,8 @@ struct cfq_queue { struct rb_node rb_node; /* service_tree key */ unsigned long rb_key; + /* prio tree member */ + struct rb_node p_node; /* sorted list of pending requests */ struct rb_root sort_list; /* if fifo isn't expired, next request to serve */ @@ -182,6 +192,7 @@ enum cfqq_state_flags { CFQ_CFQQ_FLAG_prio_changed, /* task priority has changed */ CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */ CFQ_CFQQ_FLAG_sync, /* synchronous queue */ + CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */ }; #define CFQ_CFQQ_FNS(name) \ @@ -208,6 +219,7 @@ CFQ_CFQQ_FNS(idle_window); CFQ_CFQQ_FNS(prio_changed); CFQ_CFQQ_FNS(slice_new); CFQ_CFQQ_FNS(sync); +CFQ_CFQQ_FNS(coop); #undef CFQ_CFQQ_FNS #define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \ @@ -416,13 +428,17 @@ static struct cfq_queue *cfq_rb_first(struct cfq_rb_root *root) return NULL; } +static void rb_erase_init(struct rb_node *n, struct rb_root *root) +{ + rb_erase(n, root); + RB_CLEAR_NODE(n); +} + static void cfq_rb_erase(struct rb_node *n, struct cfq_rb_root *root) { if (root->left == n) root->left = NULL; - - rb_erase(n, &root->rb); - RB_CLEAR_NODE(n); + rb_erase_init(n, &root->rb); } /* @@ -467,8 +483,8 @@ static unsigned long cfq_slice_offset(struct cfq_data *cfqd, * requests waiting to be processed. It is sorted in the order that * we will service the queues. */ -static void cfq_service_tree_add(struct cfq_data *cfqd, - struct cfq_queue *cfqq, int add_front) +static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq, + int add_front) { struct rb_node **p, *parent; struct cfq_queue *__cfqq; @@ -541,6 +557,63 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, rb_insert_color(&cfqq->rb_node, &cfqd->service_tree.rb); } +static struct cfq_queue * +cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector, + struct rb_node **ret_parent, struct rb_node ***rb_link) +{ + struct rb_root *root = &cfqd->prio_trees[ioprio]; + struct rb_node **p, *parent; + struct cfq_queue *cfqq = NULL; + + parent = NULL; + p = &root->rb_node; + while (*p) { + struct rb_node **n; + + parent = *p; + cfqq = rb_entry(parent, struct cfq_queue, p_node); + + /* + * Sort strictly based on sector. Smallest to the left, + * largest to the right. + */ + if (sector > cfqq->next_rq->sector) + n = &(*p)->rb_right; + else if (sector < cfqq->next_rq->sector) + n = &(*p)->rb_left; + else + break; + p = n; + } + + *ret_parent = parent; + if (rb_link) + *rb_link = p; + return NULL; +} + +static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq) +{ + struct rb_root *root = &cfqd->prio_trees[cfqq->ioprio]; + struct rb_node **p, *parent; + struct cfq_queue *__cfqq; + + if (!RB_EMPTY_NODE(&cfqq->p_node)) + rb_erase_init(&cfqq->p_node, root); + + if (cfq_class_idle(cfqq)) + return; + if (!cfqq->next_rq) + return; + + __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector, + &parent, &p); + BUG_ON(__cfqq); + + rb_link_node(&cfqq->p_node, parent, p); + rb_insert_color(&cfqq->p_node, root); +} + /* * Update cfqq's position in the service tree. */ @@ -549,8 +622,10 @@ static void cfq_resort_rr_list(struct cfq_data *cfqd, struct cfq_queue *cfqq) /* * Resorting requires the cfqq to be on the RR list already. */ - if (cfq_cfqq_on_rr(cfqq)) + if (cfq_cfqq_on_rr(cfqq)) { cfq_service_tree_add(cfqd, cfqq, 0); + cfq_prio_tree_add(cfqd, cfqq); + } } /* @@ -581,6 +656,8 @@ static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) if (!RB_EMPTY_NODE(&cfqq->rb_node)) cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree); + if (!RB_EMPTY_NODE(&cfqq->p_node)) + rb_erase_init(&cfqq->p_node, &cfqd->prio_trees[cfqq->ioprio]); BUG_ON(!cfqd->busy_queues); cfqd->busy_queues--; @@ -610,7 +687,7 @@ static void cfq_add_rq_rb(struct request *rq) { struct cfq_queue *cfqq = RQ_CFQQ(rq); struct cfq_data *cfqd = cfqq->cfqd; - struct request *__alias; + struct request *__alias, *prev; cfqq->queued[rq_is_sync(rq)]++; @@ -627,7 +704,15 @@ static void cfq_add_rq_rb(struct request *rq) /* * check if this request is a better next-serve candidate */ + prev = cfqq->next_rq; cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq); + + /* + * adjust priority tree position, if ->next_rq changes + */ + if (prev != cfqq->next_rq) + cfq_prio_tree_add(cfqd, cfqq); + BUG_ON(!cfqq->next_rq); } @@ -840,11 +925,15 @@ static struct cfq_queue *cfq_get_next_queue(struct cfq_data *cfqd) /* * Get and set a new active queue for service. */ -static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd) +static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd, + struct cfq_queue *cfqq) { - struct cfq_queue *cfqq; + if (!cfqq) { + cfqq = cfq_get_next_queue(cfqd); + if (cfqq) + cfq_clear_cfqq_coop(cfqq); + } - cfqq = cfq_get_next_queue(cfqd); __cfq_set_active_queue(cfqd, cfqq); return cfqq; } @@ -868,17 +957,89 @@ static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq) return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean; } -static int cfq_close_cooperator(struct cfq_data *cfq_data, - struct cfq_queue *cfqq) +static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, + struct cfq_queue *cur_cfqq) +{ + struct rb_root *root = &cfqd->prio_trees[cur_cfqq->ioprio]; + struct rb_node *parent, *node; + struct cfq_queue *__cfqq; + sector_t sector = cfqd->last_position; + + if (RB_EMPTY_ROOT(root)) + return NULL; + + /* + * First, if we find a request starting at the end of the last + * request, choose it. + */ + __cfqq = cfq_prio_tree_lookup(cfqd, cur_cfqq->ioprio, + sector, &parent, NULL); + if (__cfqq) + return __cfqq; + + /* + * If the exact sector wasn't found, the parent of the NULL leaf + * will contain the closest sector. + */ + __cfqq = rb_entry(parent, struct cfq_queue, p_node); + if (cfq_rq_close(cfqd, __cfqq->next_rq)) + return __cfqq; + + if (__cfqq->next_rq->sector < sector) + node = rb_next(&__cfqq->p_node); + else + node = rb_prev(&__cfqq->p_node); + if (!node) + return NULL; + + __cfqq = rb_entry(node, struct cfq_queue, p_node); + if (cfq_rq_close(cfqd, __cfqq->next_rq)) + return __cfqq; + + return NULL; +} + +/* + * cfqd - obvious + * cur_cfqq - passed in so that we don't decide that the current queue is + * closely cooperating with itself. + * + * So, basically we're assuming that that cur_cfqq has dispatched at least + * one request, and that cfqd->last_position reflects a position on the disk + * associated with the I/O issued by cur_cfqq. I'm not sure this is a valid + * assumption. + */ +static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd, + struct cfq_queue *cur_cfqq, + int probe) { + struct cfq_queue *cfqq; + + /* + * A valid cfq_io_context is necessary to compare requests against + * the seek_mean of the current cfqq. + */ + if (!cfqd->active_cic) + return NULL; + /* * We should notice if some of the queues are cooperating, eg * working closely on the same area of the disk. In that case, * we can group them together and don't waste time idling. */ - return 0; + cfqq = cfqq_close(cfqd, cur_cfqq); + if (!cfqq) + return NULL; + + if (cfq_cfqq_coop(cfqq)) + return NULL; + + if (!probe) + cfq_mark_cfqq_coop(cfqq); + return cfqq; } + #define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024)) static void cfq_arm_slice_timer(struct cfq_data *cfqd) @@ -917,13 +1078,6 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd) if (!cic || !atomic_read(&cic->ioc->nr_tasks)) return; - /* - * See if this prio level has a good candidate - */ - if (cfq_close_cooperator(cfqd, cfqq) && - (sample_valid(cic->ttime_samples) && cic->ttime_mean > 2)) - return; - cfq_mark_cfqq_wait_request(cfqq); /* @@ -1000,7 +1154,7 @@ cfq_prio_to_maxrq(struct cfq_data *cfqd, struct cfq_queue *cfqq) */ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) { - struct cfq_queue *cfqq; + struct cfq_queue *cfqq, *new_cfqq = NULL; cfqq = cfqd->active_queue; if (!cfqq) @@ -1034,6 +1188,16 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) goto keep_queue; /* + * If another queue has a request waiting within our mean seek + * distance, let it run. The expire code will check for close + * cooperators and put the close queue at the front of the service + * tree. + */ + new_cfqq = cfq_close_cooperator(cfqd, cfqq, 0); + if (new_cfqq) + goto expire; + + /* * No requests pending. If the active queue still has requests in * flight or is idling for a new request, allow either of these * conditions to happen (or time out) before selecting a new queue. @@ -1047,7 +1211,7 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) expire: cfq_slice_expired(cfqd, 0); new_queue: - cfqq = cfq_set_active_queue(cfqd); + cfqq = cfq_set_active_queue(cfqd, new_cfqq); keep_queue: return cfqq; } @@ -1508,6 +1672,7 @@ retry: } RB_CLEAR_NODE(&cfqq->rb_node); + RB_CLEAR_NODE(&cfqq->p_node); INIT_LIST_HEAD(&cfqq->fifo); atomic_set(&cfqq->ref, 0); @@ -2000,16 +2165,24 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq) * or if we want to idle in case it has no pending requests. */ if (cfqd->active_queue == cfqq) { + const bool cfqq_empty = RB_EMPTY_ROOT(&cfqq->sort_list); + if (cfq_cfqq_slice_new(cfqq)) { cfq_set_prio_slice(cfqd, cfqq); cfq_clear_cfqq_slice_new(cfqq); } + /* + * If there are no requests waiting in this queue, and + * there are other queues ready to issue requests, AND + * those other queues are issuing requests within our + * mean seek distance, give them a chance to run instead + * of idling. + */ if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq)) cfq_slice_expired(cfqd, 1); - else if (sync && !rq_noidle(rq) && - RB_EMPTY_ROOT(&cfqq->sort_list)) { + else if (cfqq_empty && !cfq_close_cooperator(cfqd, cfqq, 1) && + sync && !rq_noidle(rq)) cfq_arm_slice_timer(cfqd); - } } if (!cfqd->rq_in_driver) -- cgit v0.10.2 From b6f0a3652ea9d2296fdc98c3b2c96603be611c4d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 15 Apr 2009 12:16:19 +0200 Subject: netfilter: nf_log regression fix commit ca735b3aaa945626ba65a3e51145bfe4ecd9e222 'netfilter: use a linked list of loggers' introduced an array of list_head in "struct nf_logger", but forgot to initialize it in nf_log_register(). This resulted in oops when calling nf_log_unregister() at module unload time. Reported-and-tested-by: Mariusz Kozlowski Signed-off-by: Eric Dumazet Acked-by: Eric Leblond Signed-off-by: Patrick McHardy diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 8bb998f..beb3731 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -36,10 +36,14 @@ static struct nf_logger *__find_logger(int pf, const char *str_logger) int nf_log_register(u_int8_t pf, struct nf_logger *logger) { const struct nf_logger *llog; + int i; if (pf >= ARRAY_SIZE(nf_loggers)) return -EINVAL; + for (i = 0; i < ARRAY_SIZE(logger->list); i++) + INIT_LIST_HEAD(&logger->list[i]); + mutex_lock(&nf_log_mutex); if (pf == NFPROTO_UNSPEC) { -- cgit v0.10.2 From 719bfeaae8104fca4ca5d47c02592b08682f14fa Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 15 Apr 2009 03:39:52 -0700 Subject: packet: avoid warnings when high-order page allocation fails Latest tcpdump/libpcap triggers annoying messages because of high order page allocation failures (when lowmem exhausted or fragmented) These allocation errors are correctly handled so could be silent. [22660.208901] tcpdump: page allocation failure. order:5, mode:0xc0d0 [22660.208921] Pid: 13866, comm: tcpdump Not tainted 2.6.30-rc2 #170 [22660.208936] Call Trace: [22660.208950] [] ? printk+0x18/0x1a [22660.208965] [] __alloc_pages_internal+0x357/0x460 [22660.208980] [] __get_free_pages+0x21/0x40 [22660.208995] [] packet_set_ring+0x105/0x3d0 [22660.209009] [] packet_setsockopt+0x21d/0x4d0 [22660.209025] [] ? filemap_fault+0x0/0x450 [22660.209040] [] sys_setsockopt+0x54/0xa0 [22660.209053] [] sys_socketcall+0xef/0x270 [22660.209067] [] sysenter_do_call+0x12/0x26 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 74776de..f546e81 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1758,8 +1758,9 @@ static void free_pg_vec(char **pg_vec, unsigned int order, unsigned int len) static inline char *alloc_one_pg_vec_page(unsigned long order) { - return (char *) __get_free_pages(GFP_KERNEL | __GFP_COMP | __GFP_ZERO, - order); + gfp_t gfp_flags = GFP_KERNEL | __GFP_COMP | __GFP_ZERO | __GFP_NOWARN; + + return (char *) __get_free_pages(gfp_flags, order); } static char **alloc_pg_vec(struct tpacket_req *req, int order) -- cgit v0.10.2 From 38fb0afcd8761f8858e27135ed89a65117e2019c Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 15 Apr 2009 12:45:08 +0200 Subject: netfilter: nf_conntrack: fix crash when unloading helpers Commit ea781f197d (netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and) get rid of call_rcu() was missing one conversion to the hlist_nulls functions, causing a crash when unloading conntrack helper modules. Reported-and-tested-by: Mariusz Kozlowski Signed-off-by: Patrick McHardy diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 30b8e90..0fa5a42 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -176,7 +176,7 @@ static void __nf_conntrack_helper_unregister(struct nf_conntrack_helper *me, } /* Get rid of expecteds, set helpers to NULL. */ - hlist_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode) + hlist_nulls_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode) unhelp(h, me); for (i = 0; i < nf_conntrack_htable_size; i++) { hlist_nulls_for_each_entry(h, nn, &net->ct.hash[i], hnnode) -- cgit v0.10.2 From acd216a15db902294904a974f66e1ba18763dc4c Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Wed, 8 Apr 2009 07:11:04 +0800 Subject: [ARM] S3C: remove duplicated #include Remove duplicated #include in arch/arm/mach-s3c2412/mach-jive.c. Signed-off-by: Huang Weiyi Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 332bd32..d324f089 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -52,7 +52,6 @@ #include #include #include -#include static struct map_desc jive_iodesc[] __initdata = { }; -- cgit v0.10.2 From b7f9a94bf22e8dfa6420faac831e40d2492dd28c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 8 Apr 2009 16:12:35 +0100 Subject: [ARM] SMDK6410: Request GPIOs for LCD power control Going forward gpio_request() will be a requirement for GPIO API users so call it for the LCD power GPIOs. With present code the kernel functions but generaets loud WARN_ON()s when using the unrequested GPIOs. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 25f7935..7f473e4 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -166,6 +166,10 @@ static void __init smdk6410_machine_init(void) s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + gpio_request(S3C64XX_GPN(5), "LCD power"); + gpio_request(S3C64XX_GPF(13), "LCD power"); + gpio_request(S3C64XX_GPF(15), "LCD power"); + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); -- cgit v0.10.2 From 02884218368080f5ab891d270168d6c76c17ee5a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Apr 2009 14:56:33 +0100 Subject: [ARM] s3c2410_defconfig: update to 2.6.30-rc2 Update arch/arm/configs/s3c2410_defconfig to the latest kernel release (2.6.30-rc2). Signed-off-by: Ben Dooks diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 65a583e..f4c42cc 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Mon Jul 7 16:59:23 2008 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 15 14:54:52 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -41,11 +41,20 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,31 +63,36 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -88,11 +102,11 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +114,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +131,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +141,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,26 +156,38 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set CONFIG_PLAT_S3C24XX=y +CONFIG_S3C2410_CLOCK=y +CONFIG_S3C24XX_DCLK=y CONFIG_CPU_S3C244X=y # CONFIG_S3C24XX_PWM is not set +CONFIG_S3C24XX_GPIO_EXTRA=128 +CONFIG_S3C24XX_GPIO_EXTRA64=y +CONFIG_S3C24XX_GPIO_EXTRA128=y CONFIG_PM_SIMTEC=y CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set +# CONFIG_S3C24XX_ADC is not set CONFIG_MACH_SMDK=y CONFIG_PLAT_S3C=y CONFIG_CPU_LLSERIAL_S3C2410=y @@ -175,6 +198,7 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # # CONFIG_S3C_BOOT_WATCHDOG is not set # CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # # Power management @@ -182,6 +206,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_DEV_HSMMC=y # # S3C2400 Machines @@ -190,7 +216,6 @@ CONFIG_CPU_S3C2410=y CONFIG_CPU_S3C2410_DMA=y CONFIG_S3C2410_PM=y CONFIG_S3C2410_GPIO=y -CONFIG_S3C2410_CLOCK=y CONFIG_SIMTEC_NOR=y CONFIG_MACH_BAST_IDE=y @@ -286,25 +311,31 @@ CONFIG_ISA=y # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=200 # CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -317,6 +348,11 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -332,6 +368,8 @@ CONFIG_FPE_NWFPE_XP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y # CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set @@ -346,10 +384,6 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=m CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -363,6 +397,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -419,6 +454,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -428,8 +464,9 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -451,8 +488,7 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -462,35 +498,26 @@ CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y CONFIG_CFG80211=m -CONFIG_NL80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set CONFIG_MAC80211=m # # Rate control algorithm selection # -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# -CONFIG_MAC80211_RC_DEFAULT="pid" -CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set -# CONFIG_IEEE80211 is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -504,7 +531,9 @@ CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -513,6 +542,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y @@ -545,7 +575,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -CONFIG_MTD_MAP_BANK_WIDTH_16=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y @@ -566,8 +596,6 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set -CONFIG_MTD_BAST=y -CONFIG_MTD_BAST_MAXSIZE=4 # CONFIG_MTD_PLATRAM is not set # @@ -590,6 +618,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_S3C2410_DEBUG is not set @@ -602,6 +631,11 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -628,23 +662,32 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +CONFIG_EEPROM_LEGACY=m +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -653,7 +696,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -699,6 +741,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -711,11 +755,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_HAVE_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -731,9 +777,14 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y -# CONFIG_ENC28J60 is not set CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -742,11 +793,14 @@ CONFIG_DM9000_DEBUGLEVEL=4 # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # CONFIG_TR is not set @@ -755,7 +809,10 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -808,11 +865,12 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set @@ -837,6 +895,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -877,14 +936,17 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S3C2410=y CONFIG_SERIAL_S3C2412=y CONFIG_SERIAL_S3C2440=y +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y @@ -892,7 +954,7 @@ CONFIG_PRINTER=y CONFIG_PPDEV=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -901,33 +963,44 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # -# CONFIG_I2C_ELEKTOR is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_PCA_ISA is not set # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -943,6 +1016,7 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=m # CONFIG_SPI_BUTTERFLY is not set +# CONFIG_SPI_GPIO is not set # CONFIG_SPI_LM70_LLP is not set CONFIG_SPI_S3C24XX=m CONFIG_SPI_S3C24XX_GPIO=m @@ -950,44 +1024,56 @@ CONFIG_SPI_S3C24XX_GPIO=m # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # -# CONFIG_DEBUG_GPIO is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1003,10 +1089,16 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -1022,7 +1114,10 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1043,20 +1138,32 @@ CONFIG_S3C2410_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_MFD_SM501_GPIO is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1082,6 +1189,7 @@ CONFIG_MFD_SM501=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1105,6 +1213,9 @@ CONFIG_FB_S3C2410=y # CONFIG_FB_S3C2410_DEBUG is not set CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1125,10 +1236,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1139,12 +1246,12 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # -# USB HID Boot Protocol drivers +# Special HID drivers # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set +CONFIG_HID_APPLE=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1161,11 +1268,15 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1174,6 +1285,8 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1181,20 +1294,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1210,7 +1323,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1221,13 +1333,12 @@ CONFIG_USB_SERIAL=y # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y @@ -1251,15 +1362,19 @@ CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1268,7 +1383,7 @@ CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1276,7 +1391,6 @@ CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_LED=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1285,8 +1399,17 @@ CONFIG_USB_LD=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m @@ -1295,7 +1418,12 @@ CONFIG_LEDS_CLASS=m # CONFIG_LEDS_S3C24XX=m CONFIG_LEDS_H1940=m +# CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1304,7 +1432,13 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m # CONFIG_LEDS_TRIGGER_IDE_DISK is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1335,31 +1469,43 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_S3C=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1370,17 +1516,20 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1391,6 +1540,11 @@ CONFIG_INOTIFY_USER=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -1416,15 +1570,13 @@ CONFIG_NTFS_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1444,23 +1596,29 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1546,6 +1704,11 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1565,14 +1728,39 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1586,19 +1774,29 @@ CONFIG_DEBUG_S3C_UART=0 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1634,6 +1832,10 @@ CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1663,23 +1865,33 @@ CONFIG_CRYPTO_DES=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From 7fa6bed89af1ddb14511fddc47133e574d92dcb2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Apr 2009 15:00:18 +0100 Subject: [ARM] s3c2410_defconfig: Update network options Update the list of modules being built for the network core of the s3c2410_defconfig. This update adds such items as TCP congestion, netfilter for IPv4 and IPv6. Signed-off-by: Ben Dooks diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f4c42cc..5b92cae 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30-rc2 -# Wed Apr 15 14:54:52 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -393,29 +392,33 @@ CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=m -# CONFIG_NET_KEY is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_ASK_IP_FIB_HASH is not set +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y @@ -423,8 +426,25 @@ CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m @@ -448,7 +468,175 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +# CONFIG_IP_VS_IPV6 is not set +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +# CONFIG_IP_VS_PROTO_TCP is not set +# CONFIG_IP_VS_PROTO_UDP is not set +# CONFIG_IP_VS_PROTO_ESP is not set +# CONFIG_IP_VS_PROTO_AH is not set + +# +# IPVS scheduler +# +# CONFIG_IP_VS_RR is not set +# CONFIG_IP_VS_WRR is not set +# CONFIG_IP_VS_LC is not set +# CONFIG_IP_VS_WLC is not set +# CONFIG_IP_VS_LBLC is not set +# CONFIG_IP_VS_LBLCR is not set +# CONFIG_IP_VS_DH is not set +# CONFIG_IP_VS_SH is not set +# CONFIG_IP_VS_SED is not set +# CONFIG_IP_VS_NQ is not set + +# +# IPVS application helper +# + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -466,6 +654,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # CONFIG_DCB is not set # @@ -1828,7 +2017,7 @@ CONFIG_CRYPTO_HMAC=m # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1886,12 +2075,16 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y -- cgit v0.10.2 From 2ba4d47210354e5595ceb4464525b5ae7cff3774 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Apr 2009 15:02:47 +0100 Subject: [ARM] s3c2410_defconfig: Update machine configuration Update the machine configuration of s3c2410_defconfig to add support for newer machines, and update the s3c24xx specific options. Signed-off-by: Ben Dooks diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 5b92cae..e347de1 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -3,6 +3,7 @@ # Linux kernel version: 2.6.30-rc2 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set @@ -179,14 +180,14 @@ CONFIG_PLAT_S3C24XX=y CONFIG_S3C2410_CLOCK=y CONFIG_S3C24XX_DCLK=y CONFIG_CPU_S3C244X=y -# CONFIG_S3C24XX_PWM is not set +CONFIG_S3C24XX_PWM=y CONFIG_S3C24XX_GPIO_EXTRA=128 CONFIG_S3C24XX_GPIO_EXTRA64=y CONFIG_S3C24XX_GPIO_EXTRA128=y CONFIG_PM_SIMTEC=y CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set -# CONFIG_S3C24XX_ADC is not set +CONFIG_S3C24XX_ADC=y CONFIG_MACH_SMDK=y CONFIG_PLAT_S3C=y CONFIG_CPU_LLSERIAL_S3C2410=y @@ -196,7 +197,7 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # Boot options # # CONFIG_S3C_BOOT_WATCHDOG is not set -# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # @@ -229,7 +230,7 @@ CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y CONFIG_MACH_AML_M5900=y CONFIG_BAST_PC104_IRQ=y -# CONFIG_MACH_TCT_HAMMER is not set +CONFIG_MACH_TCT_HAMMER=y CONFIG_MACH_VR1000=y CONFIG_MACH_QT2410=y CONFIG_CPU_S3C2412=y @@ -239,10 +240,11 @@ CONFIG_S3C2412_PM=y # # S3C2412 Machines # -# CONFIG_MACH_JIVE is not set +CONFIG_MACH_JIVE=y +# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set CONFIG_MACH_SMDK2413=y CONFIG_MACH_S3C2413=y -# CONFIG_MACH_SMDK2412 is not set +CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y CONFIG_CPU_S3C2440=y CONFIG_S3C2440_DMA=y @@ -256,7 +258,7 @@ CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y -# CONFIG_MACH_AT2440EVB is not set +CONFIG_MACH_AT2440EVB=y CONFIG_CPU_S3C2442=y # @@ -402,8 +404,6 @@ CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_ASK_IP_FIB_HASH is not set -# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y @@ -1612,6 +1612,7 @@ CONFIG_LEDS_H1940=m # CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set # CONFIG_LEDS_BD2802 is not set # -- cgit v0.10.2 From 121613e431c20de9829da0e9c83b3638762417cd Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Apr 2009 15:12:11 +0100 Subject: [ARM] s3c2410_defconfig: Add MMC/SD core and drivers Add SD/MMC to the s3c2410_defconfig, building in the core and adding the rest of the drivers as modules. Signed-off-by: Ben Dooks diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index e347de1..49a0dea 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -678,6 +678,7 @@ CONFIG_BT_HIDP=m # Bluetooth device drivers # # CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -1596,7 +1597,24 @@ CONFIG_USB_LD=m # # CONFIG_USB_GPIO_VBUS is not set # CONFIG_NOP_USB_XCEIV is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +CONFIG_MMC_TEST=m + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SPI=m +CONFIG_MMC_S3C=y # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y @@ -2075,7 +2093,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -- cgit v0.10.2 From ea34f43a074af85823e49b9bf62f47d8d3f0e81a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 15 Apr 2009 08:05:13 -0700 Subject: acpi-cpufreq: fix 'smp_call_function_many()' confusion It turns out that 'smp_call_function_many()' doesn't work at all like 'smp_call_function_single()', and my change to Andrew's patch to use it rather than a loop over all CPU's acpi-cpufreq doesn't work. My bad. 'smp_call_function_many()' has two "features" (aka "documented bugs"): (a) it needs to be called with preemption disabled, because it uses smp_processor_id() without guarding the CPU lookup with 'get_cpu()' and 'put_cpu()' like the 'single' variant does. (b) even if the current CPU is part of the CPU mask, it won't do the call on that CPU. Still, we're better off trying to use 'smp_call_function_many()' than looping over CPU's, since it at least in theory allows us to use a broadcast IPI and do it all in parallel. So let's just work around the silly semantic bugs in that function. Reported-and-tested-by: Ali Gholami Rudi Cc: Ingo Molnar Cc: Andrew Morton , Cc: Rusty Russell Cc: Dave Jones Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 837c2c4..ecdb682 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -204,7 +204,13 @@ static void drv_read(struct drv_cmd *cmd) static void drv_write(struct drv_cmd *cmd) { + int this_cpu; + + this_cpu = get_cpu(); + if (cpumask_test_cpu(this_cpu, cmd->mask)) + do_drv_write(cmd); smp_call_function_many(cmd->mask, do_drv_write, cmd, 1); + put_cpu(); } static u32 get_cur_val(const struct cpumask *mask) -- cgit v0.10.2 From fcad94a4c71c36a05f4d5c6dcb174534b4e0b136 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 15 Apr 2009 17:48:35 +0200 Subject: ALSA: hda - Fix the cmd cache keys for amp verbs Fix the key value generation for get/set amp verbs. The upper bits of the parameter have to be combined with the verb value to be unique for each direction/index of amp access. This fixes the resume problem on some hardwares like Macbook after the channel mode is changed. Tested-by: Johannes Berg Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index a4e5e59..fd6e6f3 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2250,7 +2250,11 @@ int snd_hda_codec_write_cache(struct hda_codec *codec, hda_nid_t nid, err = bus->ops.command(bus, res); if (!err) { struct hda_cache_head *c; - u32 key = build_cmd_cache_key(nid, verb); + u32 key; + /* parm may contain the verb stuff for get/set amp */ + verb = verb | (parm >> 8); + parm &= 0xff; + key = build_cmd_cache_key(nid, verb); c = get_alloc_hash(&codec->cmd_cache, key); if (c) c->val = parm; -- cgit v0.10.2 From d061ebd57a046b3df8be8b76c387a95171059244 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sat, 11 Apr 2009 16:55:41 -0700 Subject: Input: hp_sdc_rtc should depend on serio Fix this build error when CONFIG_SERIO is not set hp_sdc_rtc.c:691: undefined reference to `hp_sdc_request_timer_irq' and so on.. "select should be used with care. select will force a symbol to a value without visiting the dependencies." Signed-off-by: Alexander Beregalov Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 203abac..5c0a631 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -214,7 +214,7 @@ config INPUT_SGI_BTNS config HP_SDC_RTC tristate "HP SDC Real Time Clock" - depends on GSC || HP300 + depends on (GSC || HP300) && SERIO select HP_SDC help Say Y here if you want to support the built-in real time clock -- cgit v0.10.2 From 4ced8e7cb990a2c3bbf0ac7f27b35c890e7ce895 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 13 Apr 2009 15:27:49 -0700 Subject: Input: gameport - fix attach driver code The commit 6902c0bead4ce266226fc0c5b3828b850bdc884a that moved driver registration out of kgameportd thread was incomplete and did not add the code necessary to actually attach driver to already registered devices, rectify that. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index ebf4be5..2d175b5 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -50,9 +50,8 @@ static LIST_HEAD(gameport_list); static struct bus_type gameport_bus; -static void gameport_add_driver(struct gameport_driver *drv); static void gameport_add_port(struct gameport *gameport); -static void gameport_destroy_port(struct gameport *gameport); +static void gameport_attach_driver(struct gameport_driver *drv); static void gameport_reconnect_port(struct gameport *gameport); static void gameport_disconnect_port(struct gameport *gameport); @@ -230,7 +229,6 @@ static void gameport_find_driver(struct gameport *gameport) enum gameport_event_type { GAMEPORT_REGISTER_PORT, - GAMEPORT_REGISTER_DRIVER, GAMEPORT_ATTACH_DRIVER, }; @@ -374,8 +372,8 @@ static void gameport_handle_event(void) gameport_add_port(event->object); break; - case GAMEPORT_REGISTER_DRIVER: - gameport_add_driver(event->object); + case GAMEPORT_ATTACH_DRIVER: + gameport_attach_driver(event->object); break; default: @@ -706,14 +704,14 @@ static int gameport_driver_remove(struct device *dev) return 0; } -static void gameport_add_driver(struct gameport_driver *drv) +static void gameport_attach_driver(struct gameport_driver *drv) { int error; - error = driver_register(&drv->driver); + error = driver_attach(&drv->driver); if (error) printk(KERN_ERR - "gameport: driver_register() failed for %s, error: %d\n", + "gameport: driver_attach() failed for %s, error: %d\n", drv->driver.name, error); } -- cgit v0.10.2 From 157f3a3e17cd498571db2a472dc3a15a7679ee3f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 13 Apr 2009 15:27:50 -0700 Subject: Input: atkbd - add forced release keys quirk for Samsung Q45 Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index f999dc6..f3e348e 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -1534,6 +1534,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_samsung_forced_release_keys, }, { + .ident = "Samsung SQ45S70S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { .ident = "Fujitsu Amilo PA 1510", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), -- cgit v0.10.2 From e04126c79242d2740b469292d42c239bad7807cc Mon Sep 17 00:00:00 2001 From: Barry Carroll Date: Tue, 14 Apr 2009 10:38:34 -0700 Subject: Input: atkbd - add forced release keys quirk for Samsung NC20 Signed-off-by: Barry Carroll Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index f3e348e..444dec0 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -880,7 +880,7 @@ static unsigned int atkbd_hp_zv6100_forced_release_keys[] = { }; /* - * Samsung NC10 with Fn+F? key release not working + * Samsung NC10,NC20 with Fn+F? key release not working */ static unsigned int atkbd_samsung_forced_release_keys[] = { 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U @@ -1534,6 +1534,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_samsung_forced_release_keys, }, { + .ident = "Samsung NC20", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { .ident = "Samsung SQ45S70S", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), -- cgit v0.10.2 From 93ff27c66de5c9eb0ead1e6f979afa97cbcf1e9d Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 14 Apr 2009 10:38:35 -0700 Subject: Input: da9034-ts - add Bin Yang as co-author of the driver Bin did a lot of work on this driver, without his help, this driver will not be possible. Signed-off-by: Bin Yang Signed-off-by: Eric Miao Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c index fa67d78..666a6e7 100644 --- a/drivers/input/touchscreen/da9034-ts.c +++ b/drivers/input/touchscreen/da9034-ts.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006-2008 Marvell International Ltd. * Fengwei Yin + * Bin Yang * Eric Miao * * This program is free software; you can redistribute it and/or modify @@ -385,6 +386,6 @@ static void __exit da9034_touch_exit(void) module_exit(da9034_touch_exit); MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034"); -MODULE_AUTHOR("Eric Miao "); +MODULE_AUTHOR("Eric Miao , Bin Yang "); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:da9034-touch"); -- cgit v0.10.2 From 7f6d5ff22b06d0c4db7b3b1eae336a19e88f808c Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 14 Apr 2009 10:38:35 -0700 Subject: Input: da9034-ts - make pen {down,up} events more reliable PEN_{UP/DOWN} events are expected to be available soon after stopping TSI auto measurement, but this is found not always be true. Work around this by adding delay and simulating such an event (according to pen down status bit). Signed-off-by: Bin Yang Signed-off-by: Eric Miao Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c index 666a6e7..3ffd4c4 100644 --- a/drivers/input/touchscreen/da9034-ts.c +++ b/drivers/input/touchscreen/da9034-ts.c @@ -176,6 +176,16 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) goto err_reset; touch->state = STATE_STOP; + + /* FIXME: PEN_{UP/DOWN} events are expected to be + * available by stopping TSI, but this is found not + * always true, delay and simulate such an event + * here is more reliable + */ + mdelay(1); + da9034_event_handler(touch, + is_pen_down(touch) ? EVENT_PEN_DOWN : + EVENT_PEN_UP); break; case STATE_STOP: @@ -190,8 +200,6 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) report_pen_up(touch); touch->state = STATE_IDLE; } - - input_sync(touch->input_dev); break; case STATE_WAIT: @@ -201,8 +209,10 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) if (is_pen_down(touch)) { start_tsi(touch); touch->state = STATE_BUSY; - } else + } else { + report_pen_up(touch); touch->state = STATE_IDLE; + } break; } return; @@ -227,16 +237,12 @@ static int da9034_touch_notifier(struct notifier_block *nb, struct da9034_touch *touch = container_of(nb, struct da9034_touch, notifier); - if (event & DA9034_EVENT_PEN_DOWN) { - if (is_pen_down(touch)) - da9034_event_handler(touch, EVENT_PEN_DOWN); - else - da9034_event_handler(touch, EVENT_PEN_UP); - } - if (event & DA9034_EVENT_TSI_READY) da9034_event_handler(touch, EVENT_TSI_READY); + if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE) + da9034_event_handler(touch, EVENT_PEN_DOWN); + return 0; } -- cgit v0.10.2 From 0bc69ce692bd240bef2819d9f3b3527fad524f5b Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 14 Apr 2009 10:38:36 -0700 Subject: Input: ad7877, ad7879 - remove depreciated IRQF_SAMPLE_RANDOM flag This patch removes depreciated IRQF_SAMPLE_RANDOM flags from ad7877 and ad7879 touchscreen drivers. Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index e4728a2..ecaeb7e 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -736,8 +736,8 @@ static int __devinit ad7877_probe(struct spi_device *spi) /* Request AD7877 /DAV GPIO interrupt */ - err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING | - IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts); + err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING, + spi->dev.driver->name, ts); if (err) { dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); goto err_free_mem; diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index ea4c61d..5d8a703 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -448,8 +448,7 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ad7879_setup(ts); err = request_irq(bus->irq, ad7879_irq, - IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM, - bus->dev.driver->name, ts); + IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts); if (err) { dev_err(&bus->dev, "irq %d busy?\n", bus->irq); -- cgit v0.10.2 From 3eaa750d5652afbb9c8f25308c3647f89e41cefb Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 14 Apr 2009 10:38:36 -0700 Subject: Input: bf54x-keys - remove depreciated IRQF_SAMPLE_RANDOM flag Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index e94b7d7..d427f32 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -252,7 +252,7 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) } error = request_irq(bf54x_kpad->irq, bfin_kpad_isr, - IRQF_SAMPLE_RANDOM, DRV_NAME, pdev); + 0, DRV_NAME, pdev); if (error) { printk(KERN_ERR DRV_NAME ": unable to claim irq %d; error %d\n", -- cgit v0.10.2 From 9a03fbe802f4bd676de17af61aaaab8969982439 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Wed, 15 Apr 2009 09:03:07 -0700 Subject: Input: pc110pad - remove unused variable dev MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dev is leftover from b0ee0d3eb31a163c958f2960906c44bcdfdc607b (Input: pc110pad - use no_pci_devices()). Signed-off-by: Ilpo Järvinen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c index f63995f..3941f97 100644 --- a/drivers/input/mouse/pc110pad.c +++ b/drivers/input/mouse/pc110pad.c @@ -108,7 +108,6 @@ static int pc110pad_open(struct input_dev *dev) */ static int __init pc110pad_init(void) { - struct pci_dev *dev; int err; if (!no_pci_devices()) -- cgit v0.10.2 From 180deb50880cdc5e9dd69ec97af0d6e72c5417fc Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 15 Apr 2009 09:03:07 -0700 Subject: Input: mainstone-wm97xx - fix condition in pen_up The loop body was never executed, because the condition is always false. Convert to for with more obvious condition. Signed-off-by: Jiri Slaby Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index dfa6a84..4cc047a 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -111,13 +111,12 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm) #else static void wm97xx_acc_pen_up(struct wm97xx *wm) { - int count = 16; + unsigned int count; + schedule_timeout_uninterruptible(1); - while (count < 16) { + for (count = 0; count < 16; count++) MODR; - count--; - } } #endif -- cgit v0.10.2 From 3bb4e153a7819c53911aa8a767c22bac9871a202 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 15 Apr 2009 19:34:41 +0100 Subject: MN10300: Discard duplicate PFN_xxx() macros Discard duplicate PFN_xxx() macros from arch code as they're now in the general headers. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index 71414e1..79890ed 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -136,10 +136,6 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_bus(&_etext); data_resource.end = virt_to_bus(&_edata)-1; -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) - start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT); kstart_pfn = PFN_UP(__pa(&_text)); free_pfn = PFN_UP(__pa(&_end)); -- cgit v0.10.2 From 76d320a5072f93abb913e9b9d84304f819c34b96 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 15 Apr 2009 19:34:46 +0100 Subject: MN10300: Wire up missing system calls Wire up missing system calls preadv() and pwritev(). Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index 543a4f9..fef5b43 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -344,6 +344,8 @@ #define __NR_dup3 331 #define __NR_pipe2 332 #define __NR_inotify_init1 333 +#define __NR_preadv 334 +#define __NR_pwritev 335 #ifdef __KERNEL__ diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 34ab5a2..3dc3e46 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -723,6 +723,8 @@ ENTRY(sys_call_table) .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 335 */ nr_syscalls=(.-sys_call_table)/4 -- cgit v0.10.2 From 616df135110ccae617ef9f10e0814fa48462cc37 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 15 Apr 2009 19:34:51 +0100 Subject: MN10300: Stop gcc from generating uninitialised variable warnings after BUG() Stop gcc from generating uninitialised variable warnings after BUG(). The problem is that MN10300's implementation of BUG() invokes system call 15 which doesn't return - but there's no way to tell the compiler that and also emit the bug table element with the correct file and line data. So instead, we make the do...while wrapper in _debug_bug_trap() an endless loop from which there's no escape. Also, while we're at it, (1) get rid of _debug_bug_trap() and just implement directly as BUG(), and (2) make the implementation of BUG() contingent on CONFIG_BUG=y. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h index 4fcf338..aa6a388 100644 --- a/arch/mn10300/include/asm/bug.h +++ b/arch/mn10300/include/asm/bug.h @@ -11,10 +11,12 @@ #ifndef _ASM_BUG_H #define _ASM_BUG_H +#ifdef CONFIG_BUG + /* * Tell the user there is some problem. */ -#define _debug_bug_trap() \ +#define BUG() \ do { \ asm volatile( \ " syscall 15 \n" \ @@ -25,11 +27,11 @@ do { \ : \ : "i"(__FILE__), "i"(__LINE__) \ ); \ -} while (0) - -#define BUG() _debug_bug_trap() +} while (1) #define HAVE_ARCH_BUG +#endif /* CONFIG_BUG */ + #include #endif /* _ASM_BUG_H */ -- cgit v0.10.2 From da60682c116855cf342926b4f3427079400ee7e6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 15 Apr 2009 19:34:56 +0100 Subject: The default CONFIG_BUG=n version of BUG() should have an empty do...while The default CONFIG_BUG=n version of BUG() should incorporate an empty a do...while statement to avoid compilation weirdness. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index 37b82cb..e727fe0 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -88,7 +88,7 @@ extern void warn_slowpath(const char *file, const int line, #else /* !CONFIG_BUG */ #ifndef HAVE_ARCH_BUG -#define BUG() +#define BUG() do {} while(0) #endif #ifndef HAVE_ARCH_BUG_ON -- cgit v0.10.2 From 5b1d07ed0e5b2707f786957c7a40eb2f399c84a8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 15 Apr 2009 19:35:01 +0100 Subject: RCU: Don't try and predeclare inline funcs as it upsets some versions of gcc Don't try and predeclare inline funcs like this: static inline void wait_migrated_callbacks(void) ... static void _rcu_barrier(enum rcu_barrier type) { ... wait_migrated_callbacks(); } ... static inline void wait_migrated_callbacks(void) { wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count)); } as it upsets some versions of gcc under some circumstances: kernel/rcupdate.c: In function `_rcu_barrier': kernel/rcupdate.c:125: sorry, unimplemented: inlining failed in call to 'wait_migrated_callbacks': function body not available kernel/rcupdate.c:152: sorry, unimplemented: called from here This can be dealt with by simply putting the static variables (rcu_migrate_*) at the top, and moving the implementation of the function up so that it replaces its forward declaration. Signed-off-by: David Howells Cc: Dipankar Sarma Cc: Paul E. McKenney Signed-off-by: Linus Torvalds diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index 2c7b845..a967c9f 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -58,6 +58,10 @@ static DEFINE_MUTEX(rcu_barrier_mutex); static struct completion rcu_barrier_completion; int rcu_scheduler_active __read_mostly; +static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0); +static struct rcu_head rcu_migrate_head[3]; +static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq); + /* * Awaken the corresponding synchronize_rcu() instance now that a * grace period has elapsed. @@ -122,7 +126,10 @@ static void rcu_barrier_func(void *type) } } -static inline void wait_migrated_callbacks(void); +static inline void wait_migrated_callbacks(void) +{ + wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count)); +} /* * Orchestrate the specified type of RCU barrier, waiting for all @@ -179,21 +186,12 @@ void rcu_barrier_sched(void) } EXPORT_SYMBOL_GPL(rcu_barrier_sched); -static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0); -static struct rcu_head rcu_migrate_head[3]; -static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq); - static void rcu_migrate_callback(struct rcu_head *notused) { if (atomic_dec_and_test(&rcu_migrate_type_count)) wake_up(&rcu_migrate_wq); } -static inline void wait_migrated_callbacks(void) -{ - wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count)); -} - static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self, unsigned long action, void *hcpu) { -- cgit v0.10.2 From d45b41ae8da0f54aec0eebcc6f893ba5f22a1e8e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 15 Apr 2009 23:15:14 +0200 Subject: x86: disable X86_PTRACE_BTS for now Oleg Nesterov found a couple of races in the ptrace-bts code and fixes are queued up for it but they did not get ready in time for the merge window. We'll merge them in v2.6.31 - until then mark the feature as CONFIG_BROKEN. There's no user-space yet making use of this so it's not a big issue. Cc: Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 924e156..8130334 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -506,6 +506,7 @@ config X86_PTRACE_BTS bool "Branch Trace Store" default y depends on X86_DEBUGCTLMSR + depends on BROKEN ---help--- This adds a ptrace interface to the hardware's branch trace store. -- cgit v0.10.2 From 3f3e7c6e139f704e2f48ea3b45ff7724a8d46456 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Wed, 15 Apr 2009 18:57:55 -0700 Subject: Input: ads7846 - fix unsafe disable_irq The use of disable_irq inside the handler for the interrupt being disabled has always been dangerous. disable_irq should wait for that handler to complete before returning -> deadlock. For some reason this wasn't actually the case until 3aa551c9b was merged but since this time, the ads7846 driver has deadlocked the system on first interrupt. Convert the driver to use the handler-safe _nosync variant. Signed-off-by: Ben Nizette Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index cf7e697..8b6e30a 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -754,7 +754,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle) * that here. (The "generic irq" framework may help...) */ ts->irq_disabled = 1; - disable_irq(ts->spi->irq); + disable_irq_nosync(ts->spi->irq); ts->pending = 1; hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), HRTIMER_MODE_REL); -- cgit v0.10.2 From 063adc7502890a0b115da4af4e15cc2622b348de Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 16 Apr 2009 14:12:22 +0900 Subject: rtc: rtc-sh: clock framework support. This adds clock framework support to the rtc-sh driver. With this in place, platforms can default to leaving the clock disabled rather than placing it in the always enabled state. Signed-off-by: Paul Mundt diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index ffe34a1..4e9851f 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -573,7 +573,7 @@ config RTC_DRV_SA1100 config RTC_DRV_SH tristate "SuperH On-Chip RTC" - depends on RTC_CLASS && SUPERH + depends on RTC_CLASS && SUPERH && HAVE_CLK help Say Y here to enable support for the on-chip RTC found in most SuperH processors. diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index 9b1ff12..d7310ad 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -1,7 +1,7 @@ /* * SuperH On-Chip RTC Support * - * Copyright (C) 2006, 2007, 2008 Paul Mundt + * Copyright (C) 2006 - 2009 Paul Mundt * Copyright (C) 2006 Jamie Lenehan * Copyright (C) 2008 Angelo Castello * @@ -25,10 +25,11 @@ #include #include #include +#include #include #define DRV_NAME "sh-rtc" -#define DRV_VERSION "0.2.1" +#define DRV_VERSION "0.2.2" #define RTC_REG(r) ((r) * rtc_reg_size) @@ -87,16 +88,17 @@ #define RCR2_START 0x01 /* Start bit */ struct sh_rtc { - void __iomem *regbase; - unsigned long regsize; - struct resource *res; - int alarm_irq; - int periodic_irq; - int carry_irq; - struct rtc_device *rtc_dev; - spinlock_t lock; - unsigned long capabilities; /* See asm-sh/rtc.h for cap bits */ - unsigned short periodic_freq; + void __iomem *regbase; + unsigned long regsize; + struct resource *res; + int alarm_irq; + int periodic_irq; + int carry_irq; + struct clk *clk; + struct rtc_device *rtc_dev; + spinlock_t lock; + unsigned long capabilities; /* See asm/rtc.h for cap bits */ + unsigned short periodic_freq; }; static int __sh_rtc_interrupt(struct sh_rtc *rtc) @@ -294,10 +296,10 @@ static inline void sh_rtc_setaie(struct device *dev, unsigned int enable) tmp = readb(rtc->regbase + RCR1); - if (!enable) - tmp &= ~RCR1_AIE; - else + if (enable) tmp |= RCR1_AIE; + else + tmp &= ~RCR1_AIE; writeb(tmp, rtc->regbase + RCR1); @@ -618,6 +620,7 @@ static int sh_rtc_irq_set_freq(struct device *dev, int freq) { if (!is_power_of_2(freq)) return -EINVAL; + return sh_rtc_ioctl(dev, RTC_IRQP_SET, freq); } @@ -637,7 +640,8 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) struct sh_rtc *rtc; struct resource *res; struct rtc_time r; - int ret; + char clk_name[6]; + int clk_id, ret; rtc = kzalloc(sizeof(struct sh_rtc), GFP_KERNEL); if (unlikely(!rtc)) @@ -652,6 +656,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "No IRQ resource\n"); goto err_badres; } + rtc->periodic_irq = ret; rtc->carry_irq = platform_get_irq(pdev, 1); rtc->alarm_irq = platform_get_irq(pdev, 2); @@ -663,7 +668,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) goto err_badres; } - rtc->regsize = res->end - res->start + 1; + rtc->regsize = resource_size(res); rtc->res = request_mem_region(res->start, rtc->regsize, pdev->name); if (unlikely(!rtc->res)) { @@ -677,6 +682,26 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) goto err_badmap; } + clk_id = pdev->id; + /* With a single device, the clock id is still "rtc0" */ + if (clk_id < 0) + clk_id = 0; + + snprintf(clk_name, sizeof(clk_name), "rtc%d", clk_id); + + rtc->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(rtc->clk)) { + /* + * No error handling for rtc->clk intentionally, not all + * platforms will have a unique clock for the RTC, and + * the clk API can handle the struct clk pointer being + * NULL. + */ + rtc->clk = NULL; + } + + clk_enable(rtc->clk); + rtc->rtc_dev = rtc_device_register("sh", &pdev->dev, &sh_rtc_ops, THIS_MODULE); if (IS_ERR(rtc->rtc_dev)) { @@ -759,6 +784,8 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) return 0; err_unmap: + clk_disable(rtc->clk); + clk_put(rtc->clk); iounmap(rtc->regbase); err_badmap: release_resource(rtc->res); @@ -780,6 +807,7 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev) sh_rtc_setcie(&pdev->dev, 0); free_irq(rtc->periodic_irq, rtc); + if (rtc->carry_irq > 0) { free_irq(rtc->carry_irq, rtc); free_irq(rtc->alarm_irq, rtc); @@ -789,6 +817,9 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev) iounmap(rtc->regbase); + clk_disable(rtc->clk); + clk_put(rtc->clk); + platform_set_drvdata(pdev, NULL); kfree(rtc); @@ -802,11 +833,11 @@ static void sh_rtc_set_irq_wake(struct device *dev, int enabled) struct sh_rtc *rtc = platform_get_drvdata(pdev); set_irq_wake(rtc->periodic_irq, enabled); + if (rtc->carry_irq > 0) { set_irq_wake(rtc->carry_irq, enabled); set_irq_wake(rtc->alarm_irq, enabled); } - } static int sh_rtc_suspend(struct device *dev) -- cgit v0.10.2 From 6bf853aeb1d840222aebe532ad5afc861f4d0fbb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 16 Apr 2009 14:15:38 +0900 Subject: sh: sh7722: Don't default enable the RTC clock. rtc-sh takes care of this now, so no need to have this always enabled. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 0e5d204..406747f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -256,7 +256,6 @@ static int __init sh7722_devices_setup(void) { clk_always_enable("uram0"); /* URAM */ clk_always_enable("xymem0"); /* XYMEM */ - clk_always_enable("rtc0"); /* RTC */ clk_always_enable("veu0"); /* VEU */ clk_always_enable("vpu0"); /* VPU */ clk_always_enable("jpu0"); /* JPU */ -- cgit v0.10.2 From b8c193f88ebd8705b3e916532539031cd9fc0b4c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 16 Apr 2009 14:16:33 +0900 Subject: sh: sh7723: Don't default enable the RTC clock. rtc-sh takes care of this now, so no need to have this always enabled. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 5338dac..a800466 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -267,7 +267,6 @@ static struct platform_device *sh7723_devices[] __initdata = { static int __init sh7723_devices_setup(void) { clk_always_enable("meram0"); /* MERAM */ - clk_always_enable("rtc0"); /* RTC */ clk_always_enable("veu1"); /* VEU2H1 */ clk_always_enable("veu0"); /* VEU2H0 */ clk_always_enable("vpu0"); /* VPU */ -- cgit v0.10.2 From d523b0c808a5c5cbde9ac89427d98ee6288f5f2f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 15 Apr 2009 11:39:01 -0700 Subject: ALSA: hda_intel.c - Consolidate bitfields Commit fa00e046b41663cbda9b1affc0594669e5f14219 added a new bitfield not adjacent to other bitfields in the same struct. Moved the new one. Signed-off-by: Joe Perches Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index bc882f8..21e99cf 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -312,7 +312,6 @@ struct azx_dev { unsigned int period_bytes; /* size of the period in bytes */ unsigned int frags; /* number for period in the play buffer */ unsigned int fifo_size; /* FIFO size */ - unsigned int start_flag: 1; /* stream full start flag */ unsigned long start_jiffies; /* start + minimum jiffies */ unsigned long min_jiffies; /* minimum jiffies before position is valid */ @@ -333,6 +332,7 @@ struct azx_dev { unsigned int opened :1; unsigned int running :1; unsigned int irq_pending :1; + unsigned int start_flag: 1; /* stream full start flag */ /* * For VIA: * A flag to ensure DMA position is 0 -- cgit v0.10.2 From 4611b043ce9c45cd8ac760b8379b02ceffe26b0d Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Wed, 15 Apr 2009 19:43:35 -0400 Subject: ALSA: Intel8x0: Remove conflicting quirk for SSID 0x103c0934 While cleaning up quirks, I noticed that there is a duplicated quirk for the SSID 0x103c0934. Looking back through the bug reports, I've concluded that there is only one necessary quirk (hp_mute_led), so this patch removes the conflicting one. Reference: Ubuntu #44066 (https://launchpad.net/bugs/44066) Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 5dced5b..b3180d0 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1896,12 +1896,6 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { }, { .subvendor = 0x103c, - .subdevice = 0x0934, - .name = "HP nx8220", - .type = AC97_TUNE_MUTE_LED - }, - { - .subvendor = 0x103c, .subdevice = 0x129d, .name = "HP xw8000", .type = AC97_TUNE_HP_ONLY -- cgit v0.10.2 From c82834251ceb81b7575927c767500bd8c4a7f928 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Wed, 15 Apr 2009 19:48:08 -0400 Subject: ALSA: Intel8x0: Add hp_only quirk for SSID 0x1028016a (Dell Inspiron 8600) Subject says it all. Briefly, use hp_only for another Dell Inspiron 8600. Reference: Ubuntu #41015 (https://launchpad.net/bugs/41015) Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index b3180d0..8042d53 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1854,6 +1854,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { }, { .subvendor = 0x1028, + .subdevice = 0x016a, + .name = "Dell Inspiron 8600", /* STAC9750/51 */ + .type = AC97_TUNE_HP_ONLY + }, + { + .subvendor = 0x1028, .subdevice = 0x0186, .name = "Dell Latitude D810", /* cf. Malone #41015 */ .type = AC97_TUNE_HP_MUTE_LED -- cgit v0.10.2 From cbb55092a674bcfd9774637a06d0f1511763aa2c Mon Sep 17 00:00:00 2001 From: eric miao Date: Thu, 16 Apr 2009 09:55:23 +0100 Subject: [ARM] 5453/1: fix building breakage of sys_oabi-compat.c due to missing kmalloc/kfree It seems that declarations of kmalloc/kfree are missed, explicitly include it. Signed-off-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 42623db..e04173c 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -83,6 +83,7 @@ #include #include #include +#include struct oldabi_stat64 { unsigned long long st_dev; -- cgit v0.10.2 From b43fcd7dc7bf0471b3bdda8fee3418e93ac25863 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Apr 2009 17:43:24 +0000 Subject: NET/e1000: Fix powering off during shutdown Prevent e1000 from putting the adapter into D3 during shutdown except when we're going to power off the system, since doing that may generally cause problems with kexec to happen (such problems were observed for igb and forcedeth). For this purpose seperate e1000_shutdown() from e1000_suspend() and use the appropriate PCI PM callbacks in both of them. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4cd8b25..ef12931 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -156,8 +156,8 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid); static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid); static void e1000_restore_vlan(struct e1000_adapter *adapter); -static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); #ifdef CONFIG_PM +static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); static int e1000_resume(struct pci_dev *pdev); #endif static void e1000_shutdown(struct pci_dev *pdev); @@ -4601,7 +4601,7 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) return 0; } -static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) +static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -4664,22 +4664,18 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) ew32(WUC, E1000_WUC_PME_EN); ew32(WUFC, wufc); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); } else { ew32(WUC, 0); ew32(WUFC, 0); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); } e1000_release_manageability(adapter); + *enable_wake = !!wufc; + /* make sure adapter isn't asleep if manageability is enabled */ - if (adapter->en_mng_pt) { - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } + if (adapter->en_mng_pt) + *enable_wake = true; if (hw->phy_type == e1000_phy_igp_3) e1000_phy_powerdown_workaround(hw); @@ -4693,12 +4689,29 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return 0; } #ifdef CONFIG_PM +static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) +{ + int retval; + bool wake; + + retval = __e1000_shutdown(pdev, &wake); + if (retval) + return retval; + + if (wake) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } + + return 0; +} + static int e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -4753,7 +4766,14 @@ static int e1000_resume(struct pci_dev *pdev) static void e1000_shutdown(struct pci_dev *pdev) { - e1000_suspend(pdev, PMSG_SUSPEND); + bool wake; + + __e1000_shutdown(pdev, &wake); + + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } } #ifdef CONFIG_NET_POLL_CONTROLLER -- cgit v0.10.2 From 4f9de721ab73a5271a79b126f7b5140b01a05c99 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Apr 2009 17:43:43 +0000 Subject: NET/e1000e: Fix powering off during shutdown Prevent e1000e from putting the adapter into D3 during shutdown except when we're going to power off the system, since doing that may generally cause problems with kexec to happen (such problems were observed for igb and forcedeth). For this purpose seperate e1000e_shutdown() from e1000e_suspend() and use the appropriate PCI PM callbacks in both of them. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 3b0f087..1693ed1 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4346,7 +4346,7 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) } } -static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) +static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -4409,20 +4409,16 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) ew32(WUC, E1000_WUC_PME_EN); ew32(WUFC, wufc); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); } else { ew32(WUC, 0); ew32(WUFC, 0); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); } + *enable_wake = !!wufc; + /* make sure adapter isn't asleep if manageability is enabled */ - if (adapter->flags & FLAG_MNG_PT_ENABLED) { - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } + if (adapter->flags & FLAG_MNG_PT_ENABLED) + *enable_wake = true; if (adapter->hw.phy.type == e1000_phy_igp_3) e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); @@ -4435,6 +4431,26 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_disable_device(pdev); + return 0; +} + +static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake) +{ + if (sleep && wake) { + pci_prepare_to_sleep(pdev); + return; + } + + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); +} + +static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, + bool wake) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + /* * The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To @@ -4450,14 +4466,12 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, (devctl & ~PCI_EXP_DEVCTL_CERE)); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + e1000_power_off(pdev, sleep, wake); pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl); } else { - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + e1000_power_off(pdev, sleep, wake); } - - return 0; } static void e1000e_disable_l1aspm(struct pci_dev *pdev) @@ -4486,6 +4500,18 @@ static void e1000e_disable_l1aspm(struct pci_dev *pdev) } #ifdef CONFIG_PM +static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) +{ + int retval; + bool wake; + + retval = __e1000_shutdown(pdev, &wake); + if (!retval) + e1000_complete_shutdown(pdev, true, wake); + + return retval; +} + static int e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -4549,7 +4575,12 @@ static int e1000_resume(struct pci_dev *pdev) static void e1000_shutdown(struct pci_dev *pdev) { - e1000_suspend(pdev, PMSG_SUSPEND); + bool wake = false; + + __e1000_shutdown(pdev, &wake); + + if (system_state == SYSTEM_POWER_OFF) + e1000_complete_shutdown(pdev, false, wake); } #ifdef CONFIG_NET_POLL_CONTROLLER -- cgit v0.10.2 From 9d8d05ae66f40642987486f4b107565fc561a77c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Apr 2009 17:44:01 +0000 Subject: NET/ixgbe: Fix powering off during shutdown Prevent ixgbe from putting the adapter into D3 during shutdown except when we're going to power off the system, since doing that may generally cause problems with kexec to happen (such problems were observed for igb and forcedeth). For this purpose seperate ixgbe_shutdown() from ixgbe_suspend() and use the appropriate PCI PM callbacks in both of them. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 11fd153..febde45 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3612,9 +3612,9 @@ static int ixgbe_resume(struct pci_dev *pdev) return 0; } - #endif /* CONFIG_PM */ -static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) + +static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct net_device *netdev = pci_get_drvdata(pdev); struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -3673,18 +3673,46 @@ static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } + *enable_wake = !!wufc; + ixgbe_release_hw_control(adapter); pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +#ifdef CONFIG_PM +static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) +{ + int retval; + bool wake; + + retval = __ixgbe_shutdown(pdev, &wake); + if (retval) + return retval; + + if (wake) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } return 0; } +#endif /* CONFIG_PM */ static void ixgbe_shutdown(struct pci_dev *pdev) { - ixgbe_suspend(pdev, PMSG_SUSPEND); + bool wake; + + __ixgbe_shutdown(pdev, &wake); + + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } } /** -- cgit v0.10.2 From 68c468c9d02674e7164580482320cfab92e8ad85 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Apr 2009 17:07:24 +0100 Subject: [ARM] s3c2410_defconfig: Add sound drivers Add sound drivers to the s3c2410_defconfig. Signed-off-by: Ben Dooks diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 49a0dea..a21d41e 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1344,6 +1344,7 @@ CONFIG_MFD_SM501=y # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -1426,7 +1427,54 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_CAIAQ=m +# CONFIG_SND_USB_CAIAQ_INPUT is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_S3C24XX_SOC=y +CONFIG_SND_S3C24XX_SOC_I2S=m +CONFIG_SND_S3C_I2SV2_SOC=m +CONFIG_SND_S3C2412_SOC_I2S=m +CONFIG_SND_S3C2443_SOC_AC97=m +CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m +CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m +CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m +CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AC97_CODEC=m +CONFIG_SND_SOC_L3=m +CONFIG_SND_SOC_UDA134X=m +CONFIG_SND_SOC_WM8750=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set -- cgit v0.10.2 From f04121e457f8ffd45aa6f2fb7abe85552f107db4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Apr 2009 17:15:05 +0100 Subject: [ARM] s3c2410_defconfig: Add video/radio drivers Add a set of various video and radio drivers to the s3c2410_defconfig as modules. Signed-off-by: Ben Dooks diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index a21d41e..742a985 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1363,14 +1363,189 @@ CONFIG_MFD_SM501=y # # Multimedia core support # -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_VIVI=m +CONFIG_VIDEO_PMS=m +CONFIG_VIDEO_BWQCAM=m +CONFIG_VIDEO_CQCAM=m +CONFIG_VIDEO_W9966=m +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_PP=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_CPIA2=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_VIDEO_AU0828=m +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_CADET=m +CONFIG_RADIO_RTRACK=m +CONFIG_RADIO_RTRACK2=m +CONFIG_RADIO_AZTECH=m +CONFIG_RADIO_GEMTEK=m +CONFIG_RADIO_SF16FMI=m +CONFIG_RADIO_SF16FMR2=m +CONFIG_RADIO_TERRATEC=m +CONFIG_RADIO_TRUST=m +CONFIG_RADIO_TYPHOON=m +CONFIG_RADIO_TYPHOON_PROC_FS=y +CONFIG_RADIO_ZOLTRIX=m +CONFIG_USB_DSBR=m +CONFIG_USB_SI470X=m +CONFIG_USB_MR800=m +CONFIG_RADIO_TEA5764=m +CONFIG_DVB_DYNAMIC_MINORS=y +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +# CONFIG_DVB_USB_A800 is not set +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +# CONFIG_DVB_USB_GL861 is not set +# CONFIG_DVB_USB_AU6610 is not set +# CONFIG_DVB_USB_DIGITV is not set +# CONFIG_DVB_USB_VP7045 is not set +# CONFIG_DVB_USB_VP702X is not set +# CONFIG_DVB_USB_GP8PSK is not set +# CONFIG_DVB_USB_NOVA_T_USB2 is not set +# CONFIG_DVB_USB_TTUSB2 is not set +# CONFIG_DVB_USB_DTT200U is not set +# CONFIG_DVB_USB_OPERA1 is not set +CONFIG_DVB_USB_AF9005=m +# CONFIG_DVB_USB_AF9005_REMOTE is not set +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set +# CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set +# CONFIG_DVB_USB_CE6230 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set +CONFIG_DVB_CX22702=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DAB=y +CONFIG_USB_DABUSB=m # # Graphics support -- cgit v0.10.2 From 89d44a0f006f30e8a1fa23c09f25e729eb70e3e5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Apr 2009 17:21:36 +0100 Subject: [ARM] s3c2410_defconfig: Update filesystem options Update the filesystem options in the s3c2410_defconfig, such as building ext4, enable the automounter as modules and update the network filesysyem choices. Signed-off-by: Ben Dooks diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 742a985..5f2b607 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1951,8 +1951,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1965,9 +1970,9 @@ CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m CONFIG_GENERIC_ACL=y # @@ -2027,7 +2032,9 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -2043,17 +2050,31 @@ CONFIG_ROMFS_ON_BLOCK=y # CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -2312,7 +2333,7 @@ CONFIG_CRYPTO_HW=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y -- cgit v0.10.2 From f8832a988c54dbb2e12dce78ada67b1577a166ee Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Apr 2009 17:25:39 +0100 Subject: [ARM] s3c2410_defconfig: Update USB device drivers Add more USB device driver options to the s3c2410_defconfig, mostly as modules. Signed-off-by: Ben Dooks diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 5f2b607..806dcd4 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1582,7 +1582,16 @@ CONFIG_FB_SM501=y # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_PWM is not set # # Display device support @@ -1696,6 +1705,7 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_U132_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set @@ -1718,29 +1728,29 @@ CONFIG_USB_WDM=m # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m # # USB port drivers # -# CONFIG_USB_USS720 is not set +CONFIG_USB_USS720=m CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set # CONFIG_USB_EZUSB is not set @@ -1793,24 +1803,24 @@ CONFIG_USB_SERIAL_OPTION=m # # USB Miscellaneous drivers # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_BERRY_CHARGE=m CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m CONFIG_USB_LD=m -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set -- cgit v0.10.2 From ea5a6fd810a4edc22c931f4c43b8d03c3a8c30fc Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 16 Apr 2009 10:20:47 +0100 Subject: [ARM] s3c2410_defconfig: Update miscellaneous drivers Update the driver build in the s3c2410_defconfig for the LED, IDE, Input and EEPROM options Signed-off-by: Ben Dooks diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 806dcd4..2d58b8f 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -844,7 +844,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -860,10 +860,10 @@ CONFIG_MISC_DEVICES=y # # EEPROM support # -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_AT25 is not set +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_AT25=m CONFIG_EEPROM_LEGACY=m -# CONFIG_EEPROM_93CX6 is not set +CONFIG_EEPROM_93CX6=m CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -884,7 +884,7 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_PLATFORM=y # CONFIG_BLK_DEV_IDEDMA is not set # @@ -1025,7 +1025,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -1036,7 +1036,7 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -1059,17 +1059,84 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set -# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +# CONFIG_JOYSTICK_IFORCE_USB is not set +# CONFIG_JOYSTICK_IFORCE_232 is not set +# CONFIG_JOYSTICK_WARRIOR is not set +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_DB9=m +CONFIG_JOYSTICK_GAMECON=m +CONFIG_JOYSTICK_TURBOGRAFX=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y # CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_HTCPEN is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ATI_REMOTE=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # # Hardware I/O ports @@ -1079,7 +1146,9 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set # # Character devices @@ -1206,7 +1275,7 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=m # CONFIG_SPI_BUTTERFLY is not set -# CONFIG_SPI_GPIO is not set +CONFIG_SPI_GPIO=m # CONFIG_SPI_LM70_LLP is not set CONFIG_SPI_S3C24XX=m CONFIG_SPI_S3C24XX_GPIO=m @@ -1214,8 +1283,8 @@ CONFIG_SPI_S3C24XX_GPIO=m # # SPI Protocol Masters # -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set +CONFIG_SPI_SPIDEV=m +CONFIG_SPI_TLE62X0=m CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -1591,7 +1660,7 @@ CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_BACKLIGHT_GENERIC=m -# CONFIG_BACKLIGHT_PWM is not set +CONFIG_BACKLIGHT_PWM=m # # Display device support @@ -1858,13 +1927,14 @@ CONFIG_LEDS_CLASS=m # CONFIG_LEDS_S3C24XX=m CONFIG_LEDS_H1940=m -# CONFIG_LEDS_PCA9532 is not set -# CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_PCA955X is not set -# CONFIG_LEDS_DAC124S085 is not set -# CONFIG_LEDS_PWM is not set -# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_BD2802=m # # LED Triggers @@ -1873,9 +1943,9 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m # CONFIG_LEDS_TRIGGER_IDE_DISK is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=m -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set -# CONFIG_LEDS_TRIGGER_GPIO is not set -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # # iptables trigger is under Netfilter config (LED target) -- cgit v0.10.2 From 3664090e199f10cb0282097faae8f8ca58c1e4ae Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 16 Apr 2009 02:43:37 -0700 Subject: phylib: Fix delay argument of schedule_delayed_work The commit a390d1f3 ("phylib: convert state_queue work to delayed_work") missed converting 'expires' value to 'delay' value. Signed-off-by: Atsushi Nemoto Acked-by: Marcin Slusarz Signed-off-by: David S. Miller diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index e3b8932..61755cb 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -434,7 +434,7 @@ void phy_start_machine(struct phy_device *phydev, phydev->adjust_state = handler; INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine); - schedule_delayed_work(&phydev->state_queue, jiffies + HZ); + schedule_delayed_work(&phydev->state_queue, HZ); } /** @@ -946,6 +946,5 @@ static void phy_state_machine(struct work_struct *work) if (err < 0) phy_error(phydev); - schedule_delayed_work(&phydev->state_queue, - jiffies + PHY_STATE_TIME * HZ); + schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ); } -- cgit v0.10.2 From ffd0e56c606836581da5df742a43ce8015ca7475 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 16 Apr 2009 12:20:24 +0200 Subject: ALSA: hda - Fix headphone-detection on some machines with STAC/IDT codecs When the headphone can have no unique DAC, the current code doesn't check the HP-detection although it should. Put the hp-detection check before the DAC check to fix this bug. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ce30b45..917bc5d 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3076,6 +3076,11 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs, unsigned int wid_caps; for (i = 0; i < num_outs && i < ARRAY_SIZE(chname); i++) { + if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) { + wid_caps = get_wcaps(codec, pins[i]); + if (wid_caps & AC_WCAP_UNSOL_CAP) + spec->hp_detect = 1; + } nid = dac_nids[i]; if (!nid) continue; @@ -3119,11 +3124,6 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs, err = create_controls_idx(codec, name, idx, nid, 3); if (err < 0) return err; - if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) { - wid_caps = get_wcaps(codec, pins[i]); - if (wid_caps & AC_WCAP_UNSOL_CAP) - spec->hp_detect = 1; - } } } return 0; -- cgit v0.10.2 From db756394064f4059e2f542fc0d27e91ce57bf292 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 10 Mar 2009 23:21:48 +0000 Subject: [ARM] S3C: Export s3c_gpio_cfgpin and s3c_gpio_setpull for modules Add an export of the two GPIO configuration calls s3c_gpio_cfgpin and s3c_gpio_setpull to allow modules to use them (such as ASoC drivers) Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c index 7642b97..08044de 100644 --- a/arch/arm/plat-s3c/gpio-config.c +++ b/arch/arm/plat-s3c/gpio-config.c @@ -13,6 +13,7 @@ */ #include +#include #include #include @@ -38,6 +39,7 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) return ret; } +EXPORT_SYMBOL(s3c_gpio_cfgpin); int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { @@ -56,6 +58,7 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) return ret; } +EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, -- cgit v0.10.2 From 289a689b109dfd086c0459fb35b32a1d96bdb8ce Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Tue, 31 Mar 2009 12:16:59 +0200 Subject: imx21: fixes some clocknames Signed-off-by: diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 2dee5c8..cbc5dbb 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -919,17 +919,17 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0]) _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1]) _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) - _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0]) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) _REGISTER_CLOCK(NULL, "usb", usb_clk[0]) _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0]) _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1]) - _REGISTER_CLOCK(NULL, "nfc", nfc_clk) + _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) _REGISTER_CLOCK(NULL, "dma", dma_clk[0]) _REGISTER_CLOCK(NULL, "brom", brom_clk) _REGISTER_CLOCK(NULL, "emma", emma_clk[0]) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0]) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) _REGISTER_CLOCK(NULL, "i2c", i2c_clk) _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) -- cgit v0.10.2 From 1b3c9bf2cd00e1e8a47177b92900dcff363843cb Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Wed, 1 Apr 2009 13:58:21 +0200 Subject: imx21: activate i2c Set the correct clkdev-name for the i2c clock. It also get's rid of the ARCH_NR_GPIOS define on the rationale that isn't an ARCH-wide setting anyway. If a device has two pca953x devices, the reserved number will be wrong. Signed-off-by: Holger Schurig diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index cbc5dbb..999d013 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -931,7 +931,7 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0]) _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) - _REGISTER_CLOCK(NULL, "i2c", i2c_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) _REGISTER_CLOCK(NULL, "owire", owire_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index e8c4cf5..8b070a0 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -54,9 +54,6 @@ #define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */ -/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ -#define ARCH_NR_GPIOS (6*32 + 16) - /* fixed interrupt numbers */ #define MXC_INT_USBCTRL 58 #define MXC_INT_USBCTRL 58 -- cgit v0.10.2 From f8e5143be765b2c60b9ae96477560d3f46be5e99 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 4 Apr 2009 13:40:39 +0200 Subject: pcm037 board support: Fix eth interrupt gpio setting gpio_direction_input needs the gpio number, not the pin description. Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c3648ef..b5227d8 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -226,10 +226,10 @@ static void __init mxc_board_init(void) mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); - /* SMSC9215 IRQ pin */ + /* LAN9217 IRQ pin */ if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), "pcm037-eth")) - gpio_direction_input(MX31_PIN_GPIO3_1); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); #ifdef CONFIG_I2C_IMX i2c_register_board_info(1, pcm037_i2c_devices, -- cgit v0.10.2 From 4bd962987daad2d9ec83f92b2b5351a80fb8ea68 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 19 Dec 2008 14:31:54 +0100 Subject: MX31: Add more alternate pin definitions Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index ab838cf..f4849bc 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -518,6 +518,8 @@ enum iomux_pins { */ #define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1) #define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) @@ -585,6 +587,18 @@ enum iomux_pins { #define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) #define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ -- cgit v0.10.2 From c5c96f4dce83f00f587f9ee6b8679ff2ab469971 Mon Sep 17 00:00:00 2001 From: Vladimir Barinov Date: Wed, 1 Apr 2009 16:07:14 +0400 Subject: MX31: Add I2C pin definitions Add I2C pin definitions for MX31 SoC Signed-off-by: Vladimir Barinov diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index f4849bc..01dc362 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -587,6 +587,9 @@ enum iomux_pins { #define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) #define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) -- cgit v0.10.2 From c44af41ad5dc3e26b138ddf2e399cfdd0dc2008c Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 1 Apr 2009 16:18:25 +0200 Subject: MX31: pin definition for sdhc2 This also adds the pins used on mx31moboard for WP and CD Signed-off-by: Valentin Longchamp diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 01dc362..f68fb87 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -560,6 +560,16 @@ enum iomux_pins { #define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC) +#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) #define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC) -- cgit v0.10.2 From d5f281043ae3e955430dcaa92905327587b4d17a Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 1 Apr 2009 16:32:41 +0200 Subject: mx31: pin definition for csi Signed-off-by: Valentin Longchamp diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index f68fb87..57e927a 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -600,6 +600,27 @@ enum iomux_pins { #define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) #define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) #define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) #define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) -- cgit v0.10.2 From 470f9b602e3b5fa5d5fb62c8c5b648d2139e7976 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Mon, 6 Apr 2009 16:40:52 +0300 Subject: MXC: remove orphan imx_init_uart() definition Signed-off-by: Paulius Zaleckas Cc: Sascha Hauer diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h index 83fb72c4..599217b 100644 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -27,6 +27,4 @@ struct imxuart_platform_data { unsigned int flags; }; -int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); - #endif -- cgit v0.10.2 From 9070e7afb80473c2b5c932152391b52e1e89c637 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Apr 2009 13:02:36 +0100 Subject: mx31ads: imoux pins should be passed in as unsigned int To match the mxc_iomux_setup_multiple_pins() prototype. Signed-off-by: Mark Brown diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 83e5e8e..26bfe36 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -102,7 +102,7 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int uart_pins[] = { +static unsigned int uart_pins[] = { MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, -- cgit v0.10.2 From 248ca85f0135dcb03bc054cd172453b36aad6571 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Sat, 14 Mar 2009 21:51:59 +0300 Subject: qong: remove AIPS[12] mappings from machine-specific iotable AIPS[12] are no mapped from generic MX3 code so we don't need to map them from machine-specific map_io function anymore. Signed-off-by: Ilya Yanok diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 6c4283c..5a01e48 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -251,32 +251,6 @@ static void __init qong_init_fpga(void) } /* - * This structure defines the MX31 memory map. - */ -static struct map_desc qong_io_desc[] __initdata = { - { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - } -}; - -/* - * Set up static virtual mappings. - */ -static void __init qong_map_io(void) -{ - mxc_map_io(); - iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc)); -} - -/* * Board specific initialization. */ static void __init mxc_board_init(void) @@ -305,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = qong_map_io, + .map_io = mxc_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, -- cgit v0.10.2 From 3fa6dd6a7aa7ce1a7d490ef88c2c8ec7db0f196b Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Wed, 8 Apr 2009 11:15:00 +0300 Subject: MX1ADS: remove I2C ifdefs Signed-off-by: Darius Augulis diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 7ae229b..e54057f 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -28,9 +28,7 @@ #include #include #include -#ifdef CONFIG_I2C_IMX #include -#endif #include #include "devices.h" @@ -114,7 +112,6 @@ static struct platform_device flash_device = { * I2C */ -#ifdef CONFIG_I2C_IMX static int i2c_pins[] = { PA15_PF_I2C_SDA, PA16_PF_I2C_SCL, @@ -157,7 +154,6 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { .platform_data = &pcf857x_data[1], }, }; -#endif /* * Board init @@ -172,12 +168,10 @@ static void __init mx1ads_init(void) mxc_register_device(&flash_device, &mx1ads_flash_data); /* I2C */ -#ifdef CONFIG_I2C_IMX i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data); -#endif } static void __init mx1ads_timer_init(void) -- cgit v0.10.2 From 3f2030163efe4a7ee820ae56dab9a4db8c1ebb49 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Wed, 8 Apr 2009 16:17:50 +0300 Subject: Fix ifdef in plat-mxc/irc.c Move ifdef under function brackets. This fixes compile crach when IRQ priorities are disabled. Signed-off-by: Darius Augulis diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index c02b8fc..518a365 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -45,7 +45,7 @@ #define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) -extern void imx_irq_set_priority(unsigned char irq, unsigned char prio); +extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); /* all normal IRQs can be FIQs */ #define FIQ_START 0 diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 6e7578a..0fb68a5 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -50,23 +50,27 @@ #define IIM_PROD_REV_SH 3 #define IIM_PROD_REV_LEN 5 -#ifdef CONFIG_MXC_IRQ_PRIOR -void imx_irq_set_priority(unsigned char irq, unsigned char prio) +int imx_irq_set_priority(unsigned char irq, unsigned char prio) { +#ifdef CONFIG_MXC_IRQ_PRIOR unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; - if (irq > 63) - return; + if (irq >= MXC_INTERNAL_IRQS) + return -EINVAL;; temp = __raw_readl(AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; temp |= prio & mask; __raw_writel(temp, AVIC_NIPRIORITY(irq / 8)); + + return 0; +#else + return -ENOSYS; +#endif } EXPORT_SYMBOL(imx_irq_set_priority); -#endif #ifdef CONFIG_FIQ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) -- cgit v0.10.2 From 132d3f950e4dbc4e4315e44e7abc85f8aba469fd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 14 Apr 2009 11:25:18 +0100 Subject: mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board Otherwise we'd need massive ifdefs in the code. Signed-off-by: Mark Brown diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index d623558..194b842 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -19,6 +19,8 @@ config MACH_MX31ADS config MACH_MX31ADS_WM1133_EV1 bool "Support Wolfson Microelectronics 1133-EV1 module" depends on MACH_MX31ADS + depends on MFD_WM8350_I2C + depends on REGULATOR_WM8350 select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8352_CONFIG_MODE_0 help -- cgit v0.10.2 From 0ac402fdaa4569604e802018922ae7cdbe0fc63b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Apr 2009 13:05:28 +0100 Subject: mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board This allows the regulator API to power off unused regulators at the end of init. Signed-off-by: Mark Brown diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 26bfe36..a6d6efe 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -452,6 +452,8 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) wm8350->codec.platform_data = &imx32ads_wm8350_setup; + regulator_has_full_constraints(); + return 0; } -- cgit v0.10.2 From c5ab660db9a98187667d017bb9425f0c1dc76ac1 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 8 Apr 2009 11:39:34 +0200 Subject: mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig deleted file mode 100644 index bcd95b8..0000000 --- a/arch/arm/configs/imx27ads_defconfig +++ /dev/null @@ -1,826 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:29:34 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX2=y -# CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# -CONFIG_MACH_MX27=y - -# -# MX2 Platforms -# -CONFIG_MACH_MX27ADS=y -# CONFIG_MACH_PCM038 is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_FEC_OLD is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_IMX is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig new file mode 100644 index 0000000..0200d67 --- /dev/null +++ b/arch/arm/configs/mx1_defconfig @@ -0,0 +1,1105 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:11:33 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_MX1ADS=y + +# +# Freescale MXC Implementations +# +CONFIG_ARCH_MX1=y +# CONFIG_ARCH_MX2 is not set +# CONFIG_ARCH_MX3 is not set + +# +# MX1 platforms: +# +CONFIG_MACH_MXLADS=y +CONFIG_MACH_SCB9328=y +CONFIG_MXC_IRQ_PRIOR=y +# CONFIG_MXC_PWM is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_IMX=y +CONFIG_USB_IMX=y +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig new file mode 100644 index 0000000..083516c --- /dev/null +++ b/arch/arm/configs/mx27_defconfig @@ -0,0 +1,1174 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 10:18:06 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX3 is not set +# CONFIG_MACH_MX21 is not set +CONFIG_MACH_MX27=y + +# +# MX2 platforms: +# +CONFIG_MACH_MX27ADS=y +CONFIG_MACH_PCM038=y +CONFIG_MACH_PCM970_BASEBOARD=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_IMX=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx31ads_defconfig deleted file mode 100644 index e052717..0000000 --- a/arch/arm/configs/mx31ads_defconfig +++ /dev/null @@ -1,839 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:21:11 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -# CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -CONFIG_MACH_MX31ADS=y -# CONFIG_MACH_PCM037 is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx31litekit_defconfig deleted file mode 100644 index 4f41c41..0000000 --- a/arch/arm/configs/mx31litekit_defconfig +++ /dev/null @@ -1,1100 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 14:23:39 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -CONFIG_MACH_MX31LITE=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -# CONFIG_PCMCIA is not set - -# -# PC-card bridges -# - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -# CONFIG_SUSPEND is not set -# CONFIG_APM_EMULATION is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_USB_SI470X is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_HW=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig new file mode 100644 index 0000000..72a8201 --- /dev/null +++ b/arch/arm/configs/mx3_defconfig @@ -0,0 +1,1125 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:06:37 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set +CONFIG_ARCH_MX3=y +CONFIG_ARCH_MX31=y + +# +# MX3 platforms: +# +CONFIG_MACH_MX31ADS=y +CONFIG_MACH_MX31ADS_WM1133_EV1=y +CONFIG_MACH_PCM037=y +CONFIG_MACH_MX31LITE=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_L2X0=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_NONISA_IRQ=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +CONFIG_MFD_WM8350=y +CONFIG_MFD_WM8350_CONFIG_MODE_0=y +CONFIG_MFD_WM8352_CONFIG_MODE_0=y +CONFIG_MFD_WM8350_I2C=y +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_MT9M001=y +CONFIG_SOC_CAMERA_MT9M111=y +CONFIG_SOC_CAMERA_MT9T031=y +CONFIG_SOC_CAMERA_MT9V022=y +CONFIG_SOC_CAMERA_TW9910=y +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_MX3=y +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_MX3=y +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_MX3_IPU=y +CONFIG_MX3_IPU_IRQS=4 +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_WM8350=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig deleted file mode 100644 index 6e37c77..0000000 --- a/arch/arm/configs/pcm037_defconfig +++ /dev/null @@ -1,769 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Wed Jun 25 11:52:42 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -CONFIG_MACH_PCM037=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -# CONFIG_MTD_CFI_NOSWAP is not set -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -CONFIG_SMSC911X=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig deleted file mode 100644 index 41429a0..0000000 --- a/arch/arm/configs/pcm038_defconfig +++ /dev/null @@ -1,1008 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:38:36 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_PROFILING=y -CONFIG_MARKERS=y -CONFIG_OPROFILE=y -CONFIG_HAVE_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_KRETPROBES=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX2=y -# CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# -CONFIG_MACH_MX27=y - -# -# MX2 Platforms -# -# CONFIG_MACH_MX27ADS is not set -CONFIG_MACH_PCM038=y -CONFIG_MACH_PCM970_BASEBOARD=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_ENC28J60 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -CONFIG_FEC_OLD=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_PLATFORM is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -CONFIG_SPI=y -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_BITBANG=y - -# -# SPI Protocol Masters -# -# CONFIG_EEPROM_AT25 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_LOGO is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -CONFIG_RTC_DRV_PCF8563=y -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RS5C348 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -- cgit v0.10.2 From 4dc1f87f079d5c6b01284d08b28eff2c4fbd15c4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 16 Apr 2009 14:19:19 +0200 Subject: ALSA: hda - Add upper-limit of mixer amp for AD1884A-laptop model, too Add the upper-limit of mixer amp for AD1884A-laptop model just like the mobile model for some HP laptops. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 38ad3f7..9bcd8ab 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3977,6 +3977,14 @@ static int patch_ad1884a(struct hda_codec *codec) spec->input_mux = &ad1884a_laptop_capture_source; codec->patch_ops.unsol_event = ad1884a_hp_unsol_event; codec->patch_ops.init = ad1884a_hp_init; + /* set the upper-limit for mixer amp to 0dB for avoiding the + * possible damage by overloading + */ + snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT, + (0x17 << AC_AMPCAP_OFFSET_SHIFT) | + (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) | + (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) | + (1 << AC_AMPCAP_MUTE_SHIFT)); break; case AD1884A_MOBILE: spec->mixers[0] = ad1884a_mobile_mixers; -- cgit v0.10.2 From a5735b7ede1d1ca81ebf491d699530715b105560 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 15 Apr 2009 20:24:45 +0200 Subject: ASoC: pxa-ssp: allow setting of dai format 0 pxa_ssp_set_dai_fmt() currently has an early exit if the desired format equals the current configuration. This is correct behaviour unless this function is called with a zero value parameter for the first time. Zero is a valid value for this function, but the early exit is bogus in this case. Hence, set priv->dai_fmt to -1 in the beginning so we can configure the port. Signed-off-by: Daniel Mack Cc: pHilipp Zabel Signed-off-by: Mark Brown diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index c7c1996..152118c 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -806,6 +806,7 @@ static int pxa_ssp_probe(struct platform_device *pdev, goto err_priv; } + priv->dai_fmt = (unsigned int) -1; dai->private_data = priv; return 0; -- cgit v0.10.2 From 01c4cad4f76cebdb4d0db37a9775554478fb7149 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 16 Apr 2009 10:32:20 +0100 Subject: ASoC: Fix jive_wm8750.c build problems Fix build errors in sound/soc/s3c24xx/jive_wm8750.c from changes to ASoC. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c index 3206379..93e6c87 100644 --- a/sound/soc/s3c24xx/jive_wm8750.c +++ b/sound/soc/s3c24xx/jive_wm8750.c @@ -69,8 +69,8 @@ static int jive_hw_params(struct snd_pcm_substream *substream, break; } - s3c_i2sv2_calc_rate(&div, NULL, params_rate(params), - s3c2412_get_iisclk()); + s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params), + s3c2412_get_iisclk()); /* set codec DAI configuration */ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | @@ -145,8 +145,9 @@ static struct snd_soc_dai_link jive_dai = { }; /* jive audio machine driver */ -static struct snd_soc_machine snd_soc_machine_jive = { +static struct snd_soc_card snd_soc_machine_jive = { .name = "Jive", + .platform = &s3c24xx_soc_platform, .dai_link = &jive_dai, .num_links = 1, }; @@ -157,9 +158,8 @@ static struct wm8750_setup_data jive_wm8750_setup = { /* jive audio subsystem */ static struct snd_soc_device jive_snd_devdata = { - .machine = &snd_soc_machine_jive, - .platform = &s3c24xx_soc_platform, - .codec_dev = &soc_codec_dev_wm8750_spi, + .card = &snd_soc_machine_jive, + .codec_dev = &soc_codec_dev_wm8750, .codec_data = &jive_wm8750_setup, }; -- cgit v0.10.2 From 1d2b7ae9a0994c166014e9a07a61d9cfee6215a0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 16 Apr 2009 10:32:23 +0100 Subject: ASoC: s3c-i2s-v2.c fix for s3c_i2sv2_iis_calc_rate The definition of s3c_i2sv2_iis_calc_rate was never renamed from s3c2412_iis_calc_rate, so rename this to allow the build to work. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c index 295a4c9..545cfff 100644 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -473,9 +473,9 @@ static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, /* default table of all avaialable root fs divisors */ static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 }; -int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, - unsigned int *fstab, - unsigned int rate, struct clk *clk) +int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, + unsigned int *fstab, + unsigned int rate, struct clk *clk) { unsigned long clkrate = clk_get_rate(clk); unsigned int div; @@ -531,7 +531,7 @@ int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, return 0; } -EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate); +EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate); int s3c_i2sv2_probe(struct platform_device *pdev, struct snd_soc_dai *dai, -- cgit v0.10.2 From 3715c6aaa913d9fb044b9eb36d957a8d2703723a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 16 Apr 2009 10:32:22 +0100 Subject: ASoC: Fix s3c-i2s-v2.c snd_soc_dai changes Fix the build error in s3c-i2s-v2.c caused by a change to the snd_soc_dai ops field. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c index 545cfff..689ffcd 100644 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -624,10 +624,12 @@ static int s3c2412_i2s_resume(struct snd_soc_dai *dai) int s3c_i2sv2_register_dai(struct snd_soc_dai *dai) { - dai->ops.trigger = s3c2412_i2s_trigger; - dai->ops.hw_params = s3c2412_i2s_hw_params; - dai->ops.set_fmt = s3c2412_i2s_set_fmt; - dai->ops.set_clkdiv = s3c2412_i2s_set_clkdiv; + struct snd_soc_dai_ops *ops = dai->ops; + + ops->trigger = s3c2412_i2s_trigger; + ops->hw_params = s3c2412_i2s_hw_params; + ops->set_fmt = s3c2412_i2s_set_fmt; + ops->set_clkdiv = s3c2412_i2s_set_clkdiv; dai->suspend = s3c2412_i2s_suspend; dai->resume = s3c2412_i2s_resume; -- cgit v0.10.2 From 76fff3680286d3f7f1ced5e38d613deff86caf20 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 16 Apr 2009 10:32:21 +0100 Subject: ASoC: Fix include build error in s3c2412-i2s.c Fix accidental change of to in s3c2412-i2s.c Signed-off-by: Ben Dooks Signed-off-by: Mark Brown diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c index 1ca3cda..b7e0b3f 100644 --- a/sound/soc/s3c24xx/s3c2412-i2s.c +++ b/sound/soc/s3c24xx/s3c2412-i2s.c @@ -33,8 +33,8 @@ #include -#include #include +#include #include #include "s3c24xx-pcm.h" -- cgit v0.10.2 From 36ce85824549c1aece65478bf9fe2d224ae06f86 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 15 Apr 2009 13:48:16 +0300 Subject: ASoC: OMAP: Fix DSP_B format in OMAP McBSP DAI driver The DSP format wasn't still correct in OMAP McBSP DAI even after the commit bd25867a6cbe7a00ef7dbe8d9ddebc91b00b9b3f. Thanks to Peter Ujfalusi for noticing and being part of the fix. Now the FS length definition is more clear by defining it with FWID(0). Signed-off-by: Jarkko Nikula Acked-by: Peter Ujfalusi Signed-off-by: Mark Brown diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 9c09b94..90f4df7 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -283,7 +283,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, break; case SND_SOC_DAIFMT_DSP_B: regs->srgr2 |= FPER(wlen * channels - 1); - regs->srgr1 |= FWID(wlen * channels - 2); + regs->srgr1 |= FWID(0); break; } @@ -302,6 +302,7 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, { struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data); struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs; + unsigned int temp_fmt = fmt; if (mcbsp_data->configured) return 0; @@ -328,6 +329,8 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, /* 0-bit data delay */ regs->rcr2 |= RDATDLY(0); regs->xcr2 |= XDATDLY(0); + /* Invert FS polarity configuration */ + temp_fmt ^= SND_SOC_DAIFMT_NB_IF; break; default: /* Unsupported data format */ @@ -351,7 +354,7 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, } /* Set bit clock (CLKX/CLKR) and FS polarities */ - switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + switch (temp_fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: /* * Normal BCLK + FS. -- cgit v0.10.2 From 002fbad829883a3ad9b185077f9e54c37dc7502d Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 15 Apr 2009 13:48:17 +0300 Subject: ASoC: OMAP: Fix FS polarity in OSK5912 machine driver Using inverted FS polarity in OSK5912 must be an error since TLV320AIC23 do not have support for inverted polarities. This is mostly due the hassle with the DSP formats in OMAP McBSP DAI and inversion on OMAP side probably just made this configuration working at some point. Signed-off-by: Jarkko Nikula Acked-by: Arun KS Signed-off-by: Mark Brown diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c index a952a4e..a4e149b 100644 --- a/sound/soc/omap/osk5912.c +++ b/sound/soc/omap/osk5912.c @@ -62,7 +62,7 @@ static int osk_hw_params(struct snd_pcm_substream *substream, /* Set codec DAI configuration */ err = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | - SND_SOC_DAIFMT_NB_IF | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); if (err < 0) { printk(KERN_ERR "can't set codec DAI configuration\n"); @@ -72,7 +72,7 @@ static int osk_hw_params(struct snd_pcm_substream *substream, /* Set cpu DAI configuration */ err = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B | - SND_SOC_DAIFMT_NB_IF | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); if (err < 0) { printk(KERN_ERR "can't set cpu DAI configuration\n"); -- cgit v0.10.2 From d4275354993eb6ed6a45cfd01a39dcb0cce3793b Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 Apr 2009 14:05:27 +0100 Subject: Update MAINTAINERS Update rmk's email address, and expand on what he's responsible for. Signed-off-by: Russell King diff --git a/MAINTAINERS b/MAINTAINERS index 0cb20d8..1ba1bfd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -543,6 +543,14 @@ S: Maintained F: arch/arm/lib/floppydma.S F: arch/arm/include/asm/floppy.h +ARM PORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/ + ARM PRIMECELL MMCI PL180/1 DRIVER S: Orphan F: drivers/mmc/host/mmci.* @@ -592,6 +600,13 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/CLKDEV SUPPORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +F: arch/arm/common/clkdev.c +F: arch/arm/include/asm/clkdev.h + ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT P: Mike Rapoport M: mike@compulab.co.il @@ -610,6 +625,15 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://gitorious.org/linux-gemini/mainline.git S: Maintained +ARM/EBSA110 MACHINE SUPPORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/mach-ebsa110/ +F: drivers/net/arm/am79c961a.* + ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6) P: Daniel Ribeiro M: drwyrm@gmail.com @@ -627,6 +651,15 @@ M: paulius.zaleckas@teltonika.lt L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/FOOTBRIDGE ARCHITECTURE +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/include/asm/hardware/dec21285.h +F: arch/arm/mach-footbridge/ + ARM/FREESCALE IMX / MXC ARM ARCHITECTURE P: Sascha Hauer M: kernel@pengutronix.de @@ -767,19 +800,27 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/RISCPC ARCHITECTURE +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/common/time-acorn.c +F: arch/arm/include/asm/hardware/entry-macro-iomd.S +F: arch/arm/include/asm/hardware/ioc.h +F: arch/arm/include/asm/hardware/iomd.h +F: arch/arm/include/asm/hardware/memc.h +F: arch/arm/mach-rpc/ +F: drivers/net/arm/ether* +F: drivers/scsi/arm/ + ARM/SHARK MACHINE SUPPORT P: Alexander Schulz M: alex@shark-linux.de W: http://www.shark-linux.de/shark.html S: Maintained -ARM/STRONGARM110 PORT -P: Russell King -M: rmk@arm.linux.org.uk -L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -W: http://www.arm.linux.org.uk/ -S: Maintained - ARM/S3C2410 ARM ARCHITECTURE P: Ben Dooks M: ben-linux@fluff.org @@ -813,6 +854,14 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.mcuos.com S: Maintained +ARM/VFP SUPPORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/vfp/ + ARPD SUPPORT P: Jonathan Layes L: netdev@vger.kernel.org @@ -1372,6 +1421,11 @@ S: Maintained F: Documentation/input/cs461x.txt F: sound/pci/cs46xx/ +CLK API +P: Russell King +M: linux@arm.linux.org.uk +F: include/linux/clk.h + CODA FILE SYSTEM P: Jan Harkes M: jaharkes@cs.cmu.edu @@ -1576,7 +1630,8 @@ F: drivers/infiniband/hw/cxgb3/ CYBERPRO FB DRIVER P: Russell King -M: rmk@arm.linux.org.uk +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained F: drivers/video/cyber2000fb.* -- cgit v0.10.2 From 0ad8acaf434d360ad99813d981a68e605d6c8179 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 24 Mar 2009 21:21:08 -0400 Subject: cfg80211: fix NULL pointer deference in reg_device_remove() We won't ever get here as regulatory_hint_core() can only fail on -ENOMEM and in that case we don't initialize cfg80211 but this is technically correct code. This is actually good for stable, where we don't check for -ENOMEM failure on __regulatory_hint()'s failure. Cc: stable@kernel.org Reported-by: Quentin Armitage Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 6327e16..6c1993d 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2095,11 +2095,12 @@ int set_regdom(const struct ieee80211_regdomain *rd) /* Caller must hold cfg80211_mutex */ void reg_device_remove(struct wiphy *wiphy) { - struct wiphy *request_wiphy; + struct wiphy *request_wiphy = NULL; assert_cfg80211_lock(); - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + if (last_request) + request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); kfree(wiphy->regd); if (!last_request || !request_wiphy) -- cgit v0.10.2 From b3631286aca3f54427ca0eb950981e9753866f6c Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Wed, 25 Mar 2009 18:10:18 +0530 Subject: mac80211: Fix bug in getting rx status for frames pending in reorder buffer Currently rx status for frames which are completed from reorder buffer is taken from it's cb area which is not always right, cb is not holding the rx status when driver uses mac80211's non-irq rx handler to pass it's received frames. This results in dropping almost all frames from reorder buffer when security is enabled by doing double decryption (first in hw, second in sw because of wrong rx status). This patch copies rx status into cb area before the frame is put into reorder buffer. After this patch, there is a significant improvement in throughput with ath9k + WPA2(AES). Signed-off-by: Vasanthakumar Thiagarajan Acked-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 64ebe66..5fa7aed 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -29,6 +29,7 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, struct tid_ampdu_rx *tid_agg_rx, struct sk_buff *skb, + struct ieee80211_rx_status *status, u16 mpdu_seq_num, int bar_req); /* @@ -1688,7 +1689,7 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) /* manage reordering buffer according to requested */ /* sequence number */ rcu_read_lock(); - ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, + ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, NULL, start_seq_num, 1); rcu_read_unlock(); return RX_DROP_UNUSABLE; @@ -2293,6 +2294,7 @@ static inline u16 seq_sub(u16 sq1, u16 sq2) static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, struct tid_ampdu_rx *tid_agg_rx, struct sk_buff *skb, + struct ieee80211_rx_status *rxstatus, u16 mpdu_seq_num, int bar_req) { @@ -2374,6 +2376,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, /* put the frame in the reordering buffer */ tid_agg_rx->reorder_buf[index] = skb; + memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus, + sizeof(*rxstatus)); tid_agg_rx->stored_mpdu_num++; /* release the buffer until next missing frame */ index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) @@ -2399,7 +2403,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, } static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, - struct sk_buff *skb) + struct sk_buff *skb, + struct ieee80211_rx_status *status) { struct ieee80211_hw *hw = &local->hw; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; @@ -2448,7 +2453,7 @@ static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, /* according to mpdu sequence number deal with reordering buffer */ mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4; - ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, + ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, status, mpdu_seq_num, 0); end_reorder: return ret; @@ -2512,7 +2517,7 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, return; } - if (!ieee80211_rx_reorder_ampdu(local, skb)) + if (!ieee80211_rx_reorder_ampdu(local, skb, status)) __ieee80211_rx_handle_packet(hw, skb, status, rate); rcu_read_unlock(); -- cgit v0.10.2 From ec9a1d8c13e36440eda0f3c79b8149080e3ab5ba Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 27 Mar 2009 22:51:58 +0100 Subject: b43: Poison RX buffers This patch adds poisoning and sanity checking to the RX DMA buffers. This is used for protection against buggy hardware/firmware that raises RX interrupts without doing an actual DMA transfer. This mechanism protects against rare "bad packets" (due to uninitialized skb data) and rare kernel crashes due to uninitialized RX headers. The poison is selected to not match on valid frames and to be cheap for checking. The poison check mechanism _might_ trigger incorrectly, if we are voluntarily receiving frames with bad PLCP headers. However, this is nonfatal, because the chance of such a match is basically zero and in case it happens it just results in dropping the packet. Bad-PLCP RX defaults to off, and you should leave it off unless you want to listen to the latest news broadcasted by your microwave oven. This patch also moves the initialization of the RX-header "length" field in front of the mapping of the DMA buffer. The CPU should not touch the buffer after we mapped it. Cc: stable@kernel.org Reported-by: Francesco Gringoli Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index e228c1d..dfa6c72 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -555,11 +555,32 @@ address_error: return 1; } +static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb) +{ + unsigned char *f = skb->data + ring->frameoffset; + + return ((f[0] & f[1] & f[2] & f[3] & f[4] & f[5] & f[6] & f[7]) == 0xFF); +} + +static void b43_poison_rx_buffer(struct b43_dmaring *ring, struct sk_buff *skb) +{ + struct b43_rxhdr_fw4 *rxhdr; + unsigned char *frame; + + /* This poisons the RX buffer to detect DMA failures. */ + + rxhdr = (struct b43_rxhdr_fw4 *)(skb->data); + rxhdr->frame_len = 0; + + B43_WARN_ON(ring->rx_buffersize < ring->frameoffset + sizeof(struct b43_plcp_hdr6) + 2); + frame = skb->data + ring->frameoffset; + memset(frame, 0xFF, sizeof(struct b43_plcp_hdr6) + 2 /* padding */); +} + static int setup_rx_descbuffer(struct b43_dmaring *ring, struct b43_dmadesc_generic *desc, struct b43_dmadesc_meta *meta, gfp_t gfp_flags) { - struct b43_rxhdr_fw4 *rxhdr; dma_addr_t dmaaddr; struct sk_buff *skb; @@ -568,6 +589,7 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags); if (unlikely(!skb)) return -ENOMEM; + b43_poison_rx_buffer(ring, skb); dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0); if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { /* ugh. try to realloc in zone_dma */ @@ -578,6 +600,7 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags); if (unlikely(!skb)) return -ENOMEM; + b43_poison_rx_buffer(ring, skb); dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0); if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { @@ -592,9 +615,6 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, ring->ops->fill_descriptor(ring, desc, dmaaddr, ring->rx_buffersize, 0, 0, 0); - rxhdr = (struct b43_rxhdr_fw4 *)(skb->data); - rxhdr->frame_len = 0; - return 0; } @@ -1489,6 +1509,15 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) goto drop; } } + if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) { + /* Something went wrong with the DMA. + * The device did not touch the buffer and did not overwrite the poison. */ + b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n"); + /* recycle the descriptor buffer. */ + sync_descbuffer_for_device(ring, meta->dmaaddr, + ring->rx_buffersize); + goto drop; + } if (unlikely(len > ring->rx_buffersize)) { /* The data did not fit into one descriptor buffer * and is split over multiple buffers. -- cgit v0.10.2 From cf68636a9773aa97915497fe54fa4a51e3f08f3a Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sat, 28 Mar 2009 00:41:25 +0100 Subject: b43: Refresh RX poison on buffer recycling The RX buffer poison needs to be refreshed, if we recycle an RX buffer, because it might be (partially) overwritten by some DMA operations. Cc: stable@kernel.org Cc: Francesco Gringoli Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index dfa6c72..eae680b 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1503,20 +1503,16 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) len = le16_to_cpu(rxhdr->frame_len); } while (len == 0 && i++ < 5); if (unlikely(len == 0)) { - /* recycle the descriptor buffer. */ - sync_descbuffer_for_device(ring, meta->dmaaddr, - ring->rx_buffersize); - goto drop; + dmaaddr = meta->dmaaddr; + goto drop_recycle_buffer; } } if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) { /* Something went wrong with the DMA. * The device did not touch the buffer and did not overwrite the poison. */ b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n"); - /* recycle the descriptor buffer. */ - sync_descbuffer_for_device(ring, meta->dmaaddr, - ring->rx_buffersize); - goto drop; + dmaaddr = meta->dmaaddr; + goto drop_recycle_buffer; } if (unlikely(len > ring->rx_buffersize)) { /* The data did not fit into one descriptor buffer @@ -1530,6 +1526,7 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) while (1) { desc = ops->idx2desc(ring, *slot, &meta); /* recycle the descriptor buffer. */ + b43_poison_rx_buffer(ring, meta->skb); sync_descbuffer_for_device(ring, meta->dmaaddr, ring->rx_buffersize); *slot = next_slot(ring, *slot); @@ -1548,8 +1545,7 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) err = setup_rx_descbuffer(ring, desc, meta, GFP_ATOMIC); if (unlikely(err)) { b43dbg(ring->dev->wl, "DMA RX: setup_rx_descbuffer() failed\n"); - sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize); - goto drop; + goto drop_recycle_buffer; } unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0); @@ -1559,6 +1555,11 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) b43_rx(ring->dev, skb, rxhdr); drop: return; + +drop_recycle_buffer: + /* Poison and recycle the RX buffer. */ + b43_poison_rx_buffer(ring, skb); + sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize); } void b43_dma_rx(struct b43_dmaring *ring) -- cgit v0.10.2 From 540828196e48ec54b64067a2b9defd870bff3ece Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Wed, 25 Mar 2009 03:11:44 +0100 Subject: p54: replace MAC80211_LEDS with P54_LEDS in p54.h I'm very sorry, as this change belongs to the other patch: "[PATCH] p54: fix SoftLED compile dependencies". however I must have somehow lost "git add" for that file. Signed-off-by: Christian Lamparter Acked-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h index 2dda5fe..ecf8b6e 100644 --- a/drivers/net/wireless/p54/p54.h +++ b/drivers/net/wireless/p54/p54.h @@ -14,9 +14,9 @@ * published by the Free Software Foundation. */ -#ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS #include -#endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ enum p54_control_frame_types { P54_CONTROL_TYPE_SETUP = 0, @@ -116,7 +116,7 @@ enum fw_state { FW_STATE_RESETTING, }; -#ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS #define P54_LED_MAX_NAME_LEN 31 @@ -129,7 +129,7 @@ struct p54_led_dev { unsigned int registered; }; -#endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ struct p54_common { struct ieee80211_hw *hw; @@ -177,10 +177,10 @@ struct p54_common { u8 privacy_caps; u8 rx_keycache_size; /* LED management */ - #ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS struct p54_led_dev assoc_led; struct p54_led_dev tx_led; - #endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ u16 softled_state; /* bit field of glowing LEDs */ }; -- cgit v0.10.2 From 731c6531684250c46d732e369b25b003356f3947 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 30 Mar 2009 15:55:24 +0200 Subject: p54spi: fix locking warning in p54spi_op_tx This patch fixes the following waring: > ------------[ cut here ]------------ >WARNING: at kernel/softirq.c:138 local_bh_enable+0x54/0xbc() >Modules linked in: p54spi >[] (dump_stack+0x0/0x14) >[] (warn_on_slowpath+0x0/0x68) >[] (local_bh_enable+0x0/0xbc) >[] (p54spi_op_tx+0x0/0x4c [p54spi]) >[] (p54_sta_unlock+0x0/0x78) p54spi_op_tx needs to be called from different locking contexts. Therefore we have to protect the linked list with irqsave spinlocks. Reported-by: Max Filippov Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index 2b222aa..d1fe577 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -457,9 +457,10 @@ static int p54spi_wq_tx(struct p54s_priv *priv) struct ieee80211_tx_info *info; struct p54_tx_info *minfo; struct p54s_tx_info *dinfo; + unsigned long flags; int ret = 0; - spin_lock_bh(&priv->tx_lock); + spin_lock_irqsave(&priv->tx_lock, flags); while (!list_empty(&priv->tx_pending)) { entry = list_entry(priv->tx_pending.next, @@ -467,7 +468,7 @@ static int p54spi_wq_tx(struct p54s_priv *priv) list_del_init(&entry->tx_list); - spin_unlock_bh(&priv->tx_lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); dinfo = container_of((void *) entry, struct p54s_tx_info, tx_list); @@ -479,16 +480,14 @@ static int p54spi_wq_tx(struct p54s_priv *priv) ret = p54spi_tx_frame(priv, skb); - spin_lock_bh(&priv->tx_lock); - if (ret < 0) { p54_free_skb(priv->hw, skb); - goto out; + return ret; } - } -out: - spin_unlock_bh(&priv->tx_lock); + spin_lock_irqsave(&priv->tx_lock, flags); + } + spin_unlock_irqrestore(&priv->tx_lock, flags); return ret; } @@ -498,12 +497,13 @@ static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data; struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data; + unsigned long flags; BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data))); - spin_lock_bh(&priv->tx_lock); + spin_lock_irqsave(&priv->tx_lock, flags); list_add_tail(&di->tx_list, &priv->tx_pending); - spin_unlock_bh(&priv->tx_lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); queue_work(priv->hw->workqueue, &priv->work); } @@ -604,6 +604,7 @@ out: static void p54spi_op_stop(struct ieee80211_hw *dev) { struct p54s_priv *priv = dev->priv; + unsigned long flags; if (mutex_lock_interruptible(&priv->mutex)) { /* FIXME: how to handle this error? */ @@ -615,9 +616,9 @@ static void p54spi_op_stop(struct ieee80211_hw *dev) cancel_work_sync(&priv->work); p54spi_power_off(priv); - spin_lock_bh(&priv->tx_lock); + spin_lock_irqsave(&priv->tx_lock, flags); INIT_LIST_HEAD(&priv->tx_pending); - spin_unlock_bh(&priv->tx_lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); priv->fw_state = FW_STATE_OFF; mutex_unlock(&priv->mutex); -- cgit v0.10.2 From c6dbe17f193c4adc8afc6884f26efb5fa27aa8af Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno Date: Mon, 30 Mar 2009 11:04:36 -0700 Subject: net/ps3: Fix wireless AP connect error handling This patch fixes the bug that the driver tries to continue to connect(associate) to AP even if gelic_wl_do_{wpa,wep}_setup() fails, Signed-off-by: Masakazu Mokuno Signed-off-by: Geoff Levand Signed-off-by: John W. Linville diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index a5ac2bd..4f3ada6 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2101,6 +2101,9 @@ static int gelic_wl_associate_bss(struct gelic_wl_info *wl, if (ret) { pr_debug("%s: WEP/WPA setup failed %d\n", __func__, ret); + ret = -EPERM; + gelic_wl_send_iwap_event(wl, NULL); + goto out; } /* start association */ -- cgit v0.10.2 From 853da11b94e674445e93660f47a5f0aeeea09623 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 3 Apr 2009 20:10:26 -0400 Subject: ath9k: fix access to a freed skb in ath_rx_tasklet() Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 71cb18d..dd1f301 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -493,6 +493,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) int hdrlen, padsize, retval; bool decrypt_error = false; u8 keyix; + __le16 fc; spin_lock_bh(&sc->rx.rxbuflock); @@ -606,6 +607,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) /* see if any padding is done by the hw and remove it */ hdr = (struct ieee80211_hdr *)skb->data; hdrlen = ieee80211_get_hdrlen_from_skb(skb); + fc = hdr->frame_control; /* The MAC header is padded to have 32-bit boundary if the * packet payload is non-zero. The general calculation for @@ -690,7 +692,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) sc->rx.rxotherant = 0; } - if (ieee80211_is_beacon(hdr->frame_control) && + if (ieee80211_is_beacon(fc) && (sc->sc_flags & SC_OP_WAIT_FOR_BEACON)) { sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON; ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP); -- cgit v0.10.2 From 47afbaf5af9454a7a1a64591e20cbfcc27ca67a8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 7 Apr 2009 15:22:28 +0200 Subject: mac80211: correct wext transmit power handler Wext makes no assumptions about the contents of data->txpower.fixed and data->txpower.value when data->txpower.disabled is set, so do not update the user-requested power level while disabling. Also, when wext configures a really _fixed_ power output [1], we should reject it instead of limiting it to the regulatory constraint. If the user wants to set a _limit_ [2] then we should honour that. [1] iwconfig wlan0 txpower 20dBm fixed [2] iwconfig wlan0 txpower 10dBm This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1942 Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/main.c b/net/mac80211/main.c index a6f1d8a..fbcbed6 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -258,7 +258,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) (chan->max_power - local->power_constr_level) : chan->max_power; - if (local->user_power_level) + if (local->user_power_level >= 0) power = min(power, local->user_power_level); if (local->hw.conf.power_level != power) { diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index deb4ece..ce9115c 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -417,6 +417,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_channel* chan = local->hw.conf.channel; + bool reconf = false; u32 reconf_flags = 0; int new_power_level; @@ -427,14 +428,38 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, if (!chan) return -EINVAL; - if (data->txpower.fixed) - new_power_level = min(data->txpower.value, chan->max_power); - else /* Automatic power level setting */ - new_power_level = chan->max_power; + /* only change when not disabling */ + if (!data->txpower.disabled) { + if (data->txpower.fixed) { + if (data->txpower.value < 0) + return -EINVAL; + new_power_level = data->txpower.value; + /* + * Debatable, but we cannot do a fixed power + * level above the regulatory constraint. + * Use "iwconfig wlan0 txpower 15dBm" instead. + */ + if (new_power_level > chan->max_power) + return -EINVAL; + } else { + /* + * Automatic power level setting, max being the value + * passed in from userland. + */ + if (data->txpower.value < 0) + new_power_level = -1; + else + new_power_level = data->txpower.value; + } + + reconf = true; - local->user_power_level = new_power_level; - if (local->hw.conf.power_level != new_power_level) - reconf_flags |= IEEE80211_CONF_CHANGE_POWER; + /* + * ieee80211_hw_config() will limit to the channel's + * max power and possibly power constraint from AP. + */ + local->user_power_level = new_power_level; + } if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) { local->hw.conf.radio_enabled = !(data->txpower.disabled); @@ -442,7 +467,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, ieee80211_led_radio(local, local->hw.conf.radio_enabled); } - if (reconf_flags) + if (reconf || reconf_flags) ieee80211_hw_config(local, reconf_flags); return 0; -- cgit v0.10.2 From f54930f363113a9357c9ae008965b6484a61cd29 Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Tue, 7 Apr 2009 12:41:17 -0700 Subject: libertas: don't leak skb on receive error Don't lead memory when receive errors Signed-off-by: Philip Rakity Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index 63d7e19..8e66977 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -170,6 +170,7 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) lbs_deb_rx("rx err: frame received with bad length\n"); dev->stats.rx_length_errors++; ret = 0; + dev_kfree_skb(skb); goto done; } @@ -181,6 +182,7 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) lbs_pr_alert("rxpd not ok\n"); dev->stats.rx_errors++; ret = 0; + dev_kfree_skb(skb); goto done; } -- cgit v0.10.2 From 02a9a39294017f105aedebcca5f49d552b18dbaa Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Tue, 7 Apr 2009 22:59:56 +0100 Subject: at76c50x-usb: Add device ID for OQO model 01+ Add USB device ID for OQO 01+'s internal wireless LAN An OQO employee mentions the chip's true identity here:- ftp://ftp.oqo.com/unsupported/linux/OQOLinux.html Signed-off-by: Jamie Lentin Acked-by: Kalle Valo Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 0c02f1c..744f4f4 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -250,6 +250,8 @@ static struct usb_device_id dev_table[] = { { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) }, /* Siemens Gigaset USB WLAN Adapter 11 */ { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) }, + /* OQO Model 01+ Internal Wi-Fi */ + { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) }, /* * at76c505amx-rfmd */ -- cgit v0.10.2 From 011f5c5bb20c08af93faa8bfd8d611c8cf85134f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 8 Apr 2009 10:15:17 -0400 Subject: airo: queue SIOCSIWAUTH-requested auth mode change for next commit Code was clearly wrong, plus callers expect the mode change to happen as soon as possible, not dropped on the floor until the next time some other config value changes and a commit happens. Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index f21a617..c36d3a3 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -6713,11 +6713,11 @@ static int airo_set_auth(struct net_device *dev, local->config.authType = AUTH_ENCRYPT; } else return -EINVAL; - break; /* Commit the changes to flags if needed */ if (local->config.authType != currentAuthType) set_bit (FLAG_COMMIT, &local->flags); + break; } case IW_AUTH_WPA_ENABLED: -- cgit v0.10.2 From 4fc298b86635c60061bbd81cef8de2b031e5c4a7 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 24 Mar 2009 21:58:08 +0100 Subject: ar9170: add Cace Airpcap NX usb_id This patch adds a new device to ar9170usb. Reported-by: Mike Kershaw/Dragorn Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c index ad29684..43e8d8d 100644 --- a/drivers/net/wireless/ar9170/usb.c +++ b/drivers/net/wireless/ar9170/usb.c @@ -59,6 +59,8 @@ static struct usb_device_id ar9170_usb_ids[] = { { USB_DEVICE(0x0cf3, 0x9170) }, /* Atheros TG121N */ { USB_DEVICE(0x0cf3, 0x1001) }, + /* Cace Airpcap NX */ + { USB_DEVICE(0xcace, 0x0300) }, /* D-Link DWA 160A */ { USB_DEVICE(0x07d1, 0x3c10) }, /* Netgear WNDA3100 */ -- cgit v0.10.2 From e3062403f5f71c48cf26e791e576f4feca4c9c0f Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 29 Mar 2009 22:50:28 +0200 Subject: p54usb: add Telsey 802.11g USB2.0 Adapter Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index da6640a..6cc6cbc 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -71,6 +71,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */ {USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */ {USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */ + {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */ {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ -- cgit v0.10.2 From 6aabd4c4441133836ac969a9488458b37f83b677 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 28 Mar 2009 20:52:14 +0100 Subject: rt2x00: Add rt73usb USB IDs Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 420fff4..853b2b2 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2369,6 +2369,8 @@ static struct usb_device_id rt73usb_device_table[] = { /* Buffalo */ { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) }, /* CNet */ { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) }, -- cgit v0.10.2 From 591f3dc200abb2100c473248a121ce14bfeeabd6 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Tue, 31 Mar 2009 12:27:32 +0200 Subject: b43: Do radio lock assertion in software The assertion of the lock-bit in the hardware register is unreliable, because there are devices with quirks that will randomly set the bit. Do the assertion in software, only. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 4896e08..79b685e 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3974,6 +3974,11 @@ static void setup_struct_phy_for_init(struct b43_wldev *dev, phy->next_txpwr_check_time = jiffies; /* PHY TX errors counter. */ atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); + +#if B43_DEBUG + phy->phy_locked = 0; + phy->radio_locked = 0; +#endif } static void setup_struct_wldev_for_init(struct b43_wldev *dev) diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c index 026b61c..e176b6e 100644 --- a/drivers/net/wireless/b43/phy_common.c +++ b/drivers/net/wireless/b43/phy_common.c @@ -131,12 +131,16 @@ void b43_radio_lock(struct b43_wldev *dev) { u32 macctl; +#if B43_DEBUG + B43_WARN_ON(dev->phy.radio_locked); + dev->phy.radio_locked = 1; +#endif + macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK); macctl |= B43_MACCTL_RADIOLOCK; b43_write32(dev, B43_MMIO_MACCTL, macctl); - /* Commit the write and wait for the device - * to exit any radio register access. */ + /* Commit the write and wait for the firmware + * to finish any radio register access. */ b43_read32(dev, B43_MMIO_MACCTL); udelay(10); } @@ -145,11 +149,15 @@ void b43_radio_unlock(struct b43_wldev *dev) { u32 macctl; +#if B43_DEBUG + B43_WARN_ON(!dev->phy.radio_locked); + dev->phy.radio_locked = 0; +#endif + /* Commit any write */ b43_read16(dev, B43_MMIO_PHY_VER); /* unlock */ macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK)); macctl &= ~B43_MACCTL_RADIOLOCK; b43_write32(dev, B43_MMIO_MACCTL, macctl); } diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h index c9f5430..b2d9910 100644 --- a/drivers/net/wireless/b43/phy_common.h +++ b/drivers/net/wireless/b43/phy_common.h @@ -245,8 +245,10 @@ struct b43_phy { atomic_t txerr_cnt; #ifdef CONFIG_B43_DEBUG - /* PHY registers locked by b43_phy_lock()? */ + /* PHY registers locked (w.r.t. firmware) */ bool phy_locked; + /* Radio registers locked (w.r.t. firmware) */ + bool radio_locked; #endif /* B43_DEBUG */ }; -- cgit v0.10.2 From a860402d8f1756dae48cdcabe153c974116fc37e Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Wed, 15 Apr 2009 14:41:22 -0400 Subject: mac80211: quiet beacon loss messages On Sunday 05 April 2009 11:29:38 Michael Buesch wrote: > On Sunday 05 April 2009 11:23:59 Jaswinder Singh Rajput wrote: > > With latest linus tree I am getting, .config file attached: > > > > [ 22.895051] r8169: eth0: link down > > [ 22.897564] ADDRCONF(NETDEV_UP): eth0: link is not ready > > [ 22.928047] ADDRCONF(NETDEV_UP): wlan0: link is not ready > > [ 22.982292] libvirtd used greatest stack depth: 4200 bytes left > > [ 63.709879] wlan0: authenticate with AP 00:11:95:9e:df:f6 > > [ 63.712096] wlan0: authenticated > > [ 63.712127] wlan0: associate with AP 00:11:95:9e:df:f6 > > [ 63.726831] wlan0: RX AssocResp from 00:11:95:9e:df:f6 (capab=0x471 status=0 aid=1) > > [ 63.726855] wlan0: associated > > [ 63.730093] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > > [ 74.296087] wlan0: no IPv6 routers present > > [ 79.349044] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 119.358200] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 179.354292] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 259.366044] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 359.348292] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 361.953459] packagekitd used greatest stack depth: 4160 bytes left > > [ 478.824258] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 598.813343] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 718.817292] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 838.824567] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 958.815402] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1078.848434] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1198.822913] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1318.824931] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1438.814157] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1558.827336] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1678.823011] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1798.830589] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1918.828044] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 2038.827224] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 2116.517152] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 2158.840243] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 2278.827427] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > > I think this message should only show if CONFIG_MAC80211_VERBOSE_DEBUG is set. > It's kind of expected that we lose a beacon once in a while, so we shouldn't print > verbose messages to the kernel log (even if they are KERN_DEBUG). > > And besides that, I think one can easily remotely trigger this message and flood the logs. > So it should probably _also_ be ratelimited. Something like this: Signed-off-by: Michael Buesch diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7ecda9d..1b14d02 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -945,9 +945,13 @@ void ieee80211_beacon_loss_work(struct work_struct *work) u.mgd.beacon_loss_work); struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM " - "- sending probe request\n", sdata->dev->name, - sdata->u.mgd.bssid); +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM " + "- sending probe request\n", sdata->dev->name, + sdata->u.mgd.bssid); + } +#endif ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid, @@ -1007,9 +1011,13 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata) (local->hw.conf.flags & IEEE80211_CONF_PS)) && time_after(jiffies, ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) { - printk(KERN_DEBUG "%s: beacon loss from AP %pM " - "- sending probe request\n", - sdata->dev->name, ifmgd->bssid); +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: beacon loss from AP %pM " + "- sending probe request\n", + sdata->dev->name, ifmgd->bssid); + } +#endif ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid, ifmgd->ssid_len, NULL, 0); -- cgit v0.10.2 From d60cc91acdc45f234d8830409203f504d03513c9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 9 Apr 2009 09:56:02 +0200 Subject: fix iwl3945 registration regression I forgot that iwl3945 registration is separate from iwlagn. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index ce72928..8d738d7 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4913,6 +4913,8 @@ static int iwl3945_setup_mac(struct iwl_priv *priv) hw->wiphy->custom_regulatory = true; + hw->wiphy->max_scan_ssids = 1; /* WILL FIX */ + /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; -- cgit v0.10.2 From f05faa31c387fb07f4c561350f00ba12cf673c9f Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Fri, 10 Apr 2009 18:05:14 -0300 Subject: rt2x00: prevent double kfree when failing to register hardware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In a scenario where there isn't any firmware available, we will have a double kfree of rt2x00dev->spec.channels_info when ieee80211_register_hw returns an error status inside rt2x00lib_probe_hw. The problem is that if ieee80211_register_hw fails, we call rt2x00lib_remove_hw twice: * first inside rt2x00lib_probe_hw upon failure of ieee80211_register_hw * error status is returned to rt2x00lib_probe_dev, which then sees it and calls in this case rt2x00lib_remove_dev that will again run rt2x00lib_remove_hw Prevent this avoiding calling rt2x00lib_remove_hw inside rt2x00lib_probe_hw Problem was detected with CONFIG_DEBUG_PAGEALLOC=y, CONFIG_SLUB_DEBUG=y, CONFIG_SLUB_DEBUG_ON=y, that dumps this with no firmware available: rt61pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 wmaster0 (rt61pci): not using net_device_ops yet phy0: Selected rate control algorithm 'pid' phy0: Failed to initialize wep: -2 phy0 -> rt2x00lib_probe_dev: Error - Failed to initialize hw. ============================================================================= BUG kmalloc-128: Object already free ----------------------------------------------------------------------------- INFO: Allocated in rt61pci_probe_hw+0x3e5/0x6e0 [rt61pci] age=340 cpu=0 pid=21 INFO: Freed in rt2x00lib_remove_hw+0x59/0x70 [rt2x00lib] age=0 cpu=0 pid=21 INFO: Slab 0xc13ac3e0 objects=23 used=10 fp=0xdd59f6e0 flags=0x400000c3 INFO: Object 0xdd59f6e0 @offset=1760 fp=0xdd59f790 Bytes b4 0xdd59f6d0: 15 00 00 00 b2 8a fb ff 5a 5a 5a 5a 5a 5a 5a 5a ....².ûÿZZZZZZZZ Object 0xdd59f6e0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f6f0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f700: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f710: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f720: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f730: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f740: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f750: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk¥ Redzone 0xdd59f760: bb bb bb bb »»»» Padding 0xdd59f788: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Pid: 21, comm: stage1 Not tainted 2.6.29.1-desktop-1.1mnb #1 Call Trace: [] print_trailer+0xd3/0x120 [] object_err+0x37/0x50 [] __slab_free+0xe7/0x2f0 [] kfree+0x7e/0xd0 [] ? rt2x00lib_remove_hw+0x59/0x70 [rt2x00lib] [] ? rt2x00lib_remove_hw+0x59/0x70 [rt2x00lib] [] rt2x00lib_remove_hw+0x59/0x70 [rt2x00lib] [] rt2x00lib_remove_dev+0x37/0x50 [rt2x00lib] [] rt2x00lib_probe_dev+0x1a7/0x3b0 [rt2x00lib] [] rt2x00pci_probe+0xdf/0x1ee [rt2x00pci] [] local_pci_probe+0xe/0x10 [] pci_device_probe+0x60/0x80 [] driver_probe_device+0x9a/0x2e0 [] __driver_attach+0x89/0x90 [] bus_for_each_dev+0x4b/0x70 [] ? pci_device_remove+0x0/0x40 [] driver_attach+0x19/0x20 [] ? __driver_attach+0x0/0x90 [] bus_add_driver+0x1cf/0x2a0 [] ? pci_device_remove+0x0/0x40 [] driver_register+0x69/0x140 [] __pci_register_driver+0x40/0x80 [] ? rt61pci_init+0x0/0x19 [rt61pci] [] rt61pci_init+0x17/0x19 [rt61pci] [] do_one_initcall+0x26/0x1c0 [] ? slab_pad_check+0x3c/0x120 [] ? slab_pad_check+0x3c/0x120 [] ? check_object+0xda/0x210 [] ? percpu_free+0x46/0x50 [] ? __slab_free+0x22e/0x2f0 [] ? percpu_free+0x46/0x50 [] ? percpu_free+0x46/0x50 [] ? percpu_free+0x46/0x50 [] ? stop_machine_destroy+0x3c/0x40 [] ? load_module+0xa5/0x1c50 [] ? rt61pci_eepromregister_read+0x0/0x40 [rt61pci] [] ? rt2x00pci_write_tx_data+0x0/0x90 [rt2x00pci] [] ? mutex_lock+0xb/0x20 [] ? mutex_lock+0xb/0x20 [] ? tracepoint_update_probe_range+0x76/0xa0 [] ? tracepoint_module_notify+0x2f/0x40 [] ? notifier_call_chain+0x2d/0x70 [] ? __blocking_notifier_call_chain+0x4d/0x60 [] ? blocking_notifier_call_chain+0x1a/0x20 [] sys_init_module+0x96/0x1d0 [] ? sys_munmap+0x46/0x60 [] syscall_call+0x7/0xb FIX kmalloc-128: Object at 0xdd59f6e0 not freed rt61pci 0000:00:07.0: PCI INT A disabled rt61pci: probe of 0000:00:07.0 failed with error -2 Signed-off-by: Herton Ronaldo Krzesinski Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 05f94e2..5752aaa 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -646,10 +646,8 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) * Register HW. */ status = ieee80211_register_hw(rt2x00dev->hw); - if (status) { - rt2x00lib_remove_hw(rt2x00dev); + if (status) return status; - } set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags); -- cgit v0.10.2 From 23a99840d571a237845fd0906bce78e7c76be650 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Tue, 14 Apr 2009 06:32:56 +0200 Subject: mac80211: Fragmentation threshold (typo) mac80211: Fragmentation threshold (typo) ieee80211_ioctl_siwfrag() sets the fragmentation_threshold to 2352 when frame fragmentation is to be disabled, yet the corresponding 'get' function tests for 2353 bytes instead. This causes user-space tools to display a fragmentation threshold of 2352 bytes even if fragmentation has been disabled. Signed-off-by: Gerrit Renker Signed-off-by: John W. Linville diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index ce9115c..959aa83 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -555,7 +555,7 @@ static int ieee80211_ioctl_giwfrag(struct net_device *dev, struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); frag->value = local->fragmentation_threshold; - frag->disabled = (frag->value >= IEEE80211_MAX_RTS_THRESHOLD); + frag->disabled = (frag->value >= IEEE80211_MAX_FRAG_THRESHOLD); frag->fixed = 1; return 0; -- cgit v0.10.2 From 91fe9ca74e8220f17e2fa71a92cda330857daac4 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Thu, 9 Apr 2009 21:41:05 -0400 Subject: orinoco: correct timeout logic in __orinoco_hw_set_tkip_key() If the value read from HERMES_RID_TXQUEUEEMPTY becomes 0 after exactly 100 readings, we wrongly consider it a timeout. Rewrite the clever while loop as a for loop that does the right thing and looks simpler. Reported by Juha Leppanen Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c index 081428d..632fac8 100644 --- a/drivers/net/wireless/orinoco/hw.c +++ b/drivers/net/wireless/orinoco/hw.c @@ -372,15 +372,13 @@ int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx, } /* Wait upto 100ms for tx queue to empty */ - k = 100; - do { - k--; + for (k = 100; k > 0; k--) { udelay(1000); ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, &xmitting); - if (ret) + if (ret || !xmitting) break; - } while ((k > 0) && xmitting); + } if (k == 0) ret = -ETIMEDOUT; -- cgit v0.10.2 From 1269fa737f21b3f643e4b12d3ac9938b142a7f00 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 10 Apr 2009 10:02:45 +0200 Subject: ar9170: fix struct layout on arm arm will pad even between u8's, so mark the structs/unions packed. Fixes a build bug on arm due to BUILD_BUG_ON tests in the code. Signed-off-by: Johannes Berg Reported-by: Al Viro Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ar9170/hw.h b/drivers/net/wireless/ar9170/hw.h index 13091bd..53e250a 100644 --- a/drivers/net/wireless/ar9170/hw.h +++ b/drivers/net/wireless/ar9170/hw.h @@ -310,7 +310,7 @@ struct ar9170_tx_control { struct ar9170_rx_head { u8 plcp[12]; -}; +} __packed; struct ar9170_rx_tail { union { @@ -318,16 +318,16 @@ struct ar9170_rx_tail { u8 rssi_ant0, rssi_ant1, rssi_ant2, rssi_ant0x, rssi_ant1x, rssi_ant2x, rssi_combined; - }; + } __packed; u8 rssi[7]; - }; + } __packed; u8 evm_stream0[6], evm_stream1[6]; u8 phy_err; u8 SAidx, DAidx; u8 error; u8 status; -}; +} __packed; #define AR9170_ENC_ALG_NONE 0x0 #define AR9170_ENC_ALG_WEP64 0x1 -- cgit v0.10.2 From f69955855eac55a048d26a1618f50dfaa160a006 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 15 Apr 2009 13:22:37 -0400 Subject: Export filemap_write_and_wait_range This wasn't exported before and is useful (used by the experimental ext3 data=guarded code) Signed-off-by: Chris Mason Acked-by: Theodore Tso Acked-by: Jan Kara Signed-off-by: Linus Torvalds diff --git a/mm/filemap.c b/mm/filemap.c index 8bd4980..379ff0b 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -441,6 +441,7 @@ int filemap_write_and_wait_range(struct address_space *mapping, } return err; } +EXPORT_SYMBOL(filemap_write_and_wait_range); /** * add_to_page_cache_locked - add a locked page to the pagecache -- cgit v0.10.2 From 35c80d5f400f68f2eccf3069d1c068e154bde9c9 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 15 Apr 2009 13:22:38 -0400 Subject: Add block_write_full_page_endio for passing endio handler block_write_full_page doesn't allow the caller to control what happens when the IO is over. This adds a new call named block_write_full_page_endio so the buffer head end_io handler can be provided by the caller. This will be used by the ext3 data=guarded mode to do i_size updates in a workqueue based end_io handler. end_buffer_async_write is also exported so it can be called to do the dirty work of managing page writeback for the higher level end_io handler. Signed-off-by: Chris Mason Acked-by: Theodore Tso Acked-by: Jan Kara Signed-off-by: Linus Torvalds diff --git a/fs/buffer.c b/fs/buffer.c index ff8bb1f..b3e5be7 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -360,7 +360,7 @@ still_busy: * Completion handler for block_write_full_page() - pages which are unlocked * during I/O, and which have PageWriteback cleared upon I/O completion. */ -static void end_buffer_async_write(struct buffer_head *bh, int uptodate) +void end_buffer_async_write(struct buffer_head *bh, int uptodate) { char b[BDEVNAME_SIZE]; unsigned long flags; @@ -438,11 +438,17 @@ static void mark_buffer_async_read(struct buffer_head *bh) set_buffer_async_read(bh); } -void mark_buffer_async_write(struct buffer_head *bh) +void mark_buffer_async_write_endio(struct buffer_head *bh, + bh_end_io_t *handler) { - bh->b_end_io = end_buffer_async_write; + bh->b_end_io = handler; set_buffer_async_write(bh); } + +void mark_buffer_async_write(struct buffer_head *bh) +{ + mark_buffer_async_write_endio(bh, end_buffer_async_write); +} EXPORT_SYMBOL(mark_buffer_async_write); @@ -1615,7 +1621,8 @@ EXPORT_SYMBOL(unmap_underlying_metadata); * unplugging the device queue. */ static int __block_write_full_page(struct inode *inode, struct page *page, - get_block_t *get_block, struct writeback_control *wbc) + get_block_t *get_block, struct writeback_control *wbc, + bh_end_io_t *handler) { int err; sector_t block; @@ -1700,7 +1707,7 @@ static int __block_write_full_page(struct inode *inode, struct page *page, continue; } if (test_clear_buffer_dirty(bh)) { - mark_buffer_async_write(bh); + mark_buffer_async_write_endio(bh, handler); } else { unlock_buffer(bh); } @@ -1753,7 +1760,7 @@ recover: if (buffer_mapped(bh) && buffer_dirty(bh) && !buffer_delay(bh)) { lock_buffer(bh); - mark_buffer_async_write(bh); + mark_buffer_async_write_endio(bh, handler); } else { /* * The buffer may have been set dirty during @@ -2679,7 +2686,8 @@ int nobh_writepage(struct page *page, get_block_t *get_block, out: ret = mpage_writepage(page, get_block, wbc); if (ret == -EAGAIN) - ret = __block_write_full_page(inode, page, get_block, wbc); + ret = __block_write_full_page(inode, page, get_block, wbc, + end_buffer_async_write); return ret; } EXPORT_SYMBOL(nobh_writepage); @@ -2837,9 +2845,10 @@ out: /* * The generic ->writepage function for buffer-backed address_spaces + * this form passes in the end_io handler used to finish the IO. */ -int block_write_full_page(struct page *page, get_block_t *get_block, - struct writeback_control *wbc) +int block_write_full_page_endio(struct page *page, get_block_t *get_block, + struct writeback_control *wbc, bh_end_io_t *handler) { struct inode * const inode = page->mapping->host; loff_t i_size = i_size_read(inode); @@ -2848,7 +2857,8 @@ int block_write_full_page(struct page *page, get_block_t *get_block, /* Is the page fully inside i_size? */ if (page->index < end_index) - return __block_write_full_page(inode, page, get_block, wbc); + return __block_write_full_page(inode, page, get_block, wbc, + handler); /* Is the page fully outside i_size? (truncate in progress) */ offset = i_size & (PAGE_CACHE_SIZE-1); @@ -2871,9 +2881,20 @@ int block_write_full_page(struct page *page, get_block_t *get_block, * writes to that region are not written out to the file." */ zero_user_segment(page, offset, PAGE_CACHE_SIZE); - return __block_write_full_page(inode, page, get_block, wbc); + return __block_write_full_page(inode, page, get_block, wbc, handler); } +/* + * The generic ->writepage function for buffer-backed address_spaces + */ +int block_write_full_page(struct page *page, get_block_t *get_block, + struct writeback_control *wbc) +{ + return block_write_full_page_endio(page, get_block, wbc, + end_buffer_async_write); +} + + sector_t generic_block_bmap(struct address_space *mapping, sector_t block, get_block_t *get_block) { @@ -3342,9 +3363,11 @@ EXPORT_SYMBOL(block_read_full_page); EXPORT_SYMBOL(block_sync_page); EXPORT_SYMBOL(block_truncate_page); EXPORT_SYMBOL(block_write_full_page); +EXPORT_SYMBOL(block_write_full_page_endio); EXPORT_SYMBOL(cont_write_begin); EXPORT_SYMBOL(end_buffer_read_sync); EXPORT_SYMBOL(end_buffer_write_sync); +EXPORT_SYMBOL(end_buffer_async_write); EXPORT_SYMBOL(file_fsync); EXPORT_SYMBOL(generic_block_bmap); EXPORT_SYMBOL(generic_cont_expand_simple); diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 7b73bb8..16ed028 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -155,6 +155,7 @@ void create_empty_buffers(struct page *, unsigned long, unsigned long b_state); void end_buffer_read_sync(struct buffer_head *bh, int uptodate); void end_buffer_write_sync(struct buffer_head *bh, int uptodate); +void end_buffer_async_write(struct buffer_head *bh, int uptodate); /* Things to do with buffers at mapping->private_list */ void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode); @@ -197,6 +198,8 @@ extern int buffer_heads_over_limit; void block_invalidatepage(struct page *page, unsigned long offset); int block_write_full_page(struct page *page, get_block_t *get_block, struct writeback_control *wbc); +int block_write_full_page_endio(struct page *page, get_block_t *get_block, + struct writeback_control *wbc, bh_end_io_t *handler); int block_read_full_page(struct page*, get_block_t*); int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc, unsigned long from); -- cgit v0.10.2 From 8cd50e8e2b416c7f07b267ab3457c6c25a540ba9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 Apr 2009 16:09:08 +0100 Subject: [ARM] remove .gitignore from include/asm-arm Signed-off-by: Russell King diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore deleted file mode 100644 index e02c15d..0000000 --- a/include/asm-arm/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -arch -mach-types.h -- cgit v0.10.2 From 412401029259b1ad67559cec93bcc7ee4a9551aa Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 16 Apr 2009 09:58:44 -0600 Subject: powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back In commit 364fdbc00fbdd409ade63500710123fe323aa164 ("spi_mpc83xx: rework chip selects handling"), I merged activate_cs and deactivate_cs hooks into cs_control, but I overlooked that mpc52xx_psc_spi driver is using these hooks too. And that resulted in the following build failure: CC drivers/spi/mpc52xx_psc_spi.o drivers/spi/mpc52xx_psc_spi.c: In function 'mpc52xx_psc_spi_do_probe': drivers/spi/mpc52xx_psc_spi.c:398: error: 'struct fsl_spi_platform_data' has no member named 'activate_cs' drivers/spi/mpc52xx_psc_spi.c:399: error: 'struct fsl_spi_platform_data' has no member named 'deactivate_cs' make[2]: *** [drivers/spi/mpc52xx_psc_spi.o] Error 1 This patch simply adds the legacy hooks back for 2.6.30, and for 2.6.31 we'll convert the driver to ->cs_control. Reported-by: Subrata Modak Signed-off-by: Anton Vorontsov Signed-off-by: Grant Likely diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index f2a78b5..0cde180 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -83,6 +83,10 @@ struct fsl_spi_platform_data { u16 max_chipselect; void (*cs_control)(struct spi_device *spi, bool on); u32 sysclk; + + /* Legacy hooks, used by mpc52xx_psc_spi driver. */ + void (*activate_cs)(u8 cs, u8 polarity); + void (*deactivate_cs)(u8 cs, u8 polarity); }; struct mpc8xx_pcmcia_ops { -- cgit v0.10.2 From 98d500d66cb7940747b424b245fc6a51ecfbf005 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 16 Apr 2009 18:33:01 +0200 Subject: netfilter: nf_nat: add support for persistent mappings The removal of the SAME target accidentally removed one feature that is not available from the normal NAT targets so far, having multi-range mappings that use the same mapping for each connection from a single client. The current behaviour is to choose the address from the range based on source and destination IP, which breaks when communicating with sites having multiple addresses that require all connections to originate from the same IP address. Introduce a IP_NAT_RANGE_PERSISTENT option that controls whether the destination address is taken into account for selecting addresses. http://bugzilla.kernel.org/show_bug.cgi?id=12954 Signed-off-by: Patrick McHardy diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h index 9dc1039..8df0b7f 100644 --- a/include/net/netfilter/nf_nat.h +++ b/include/net/netfilter/nf_nat.h @@ -18,6 +18,7 @@ enum nf_nat_manip_type #define IP_NAT_RANGE_MAP_IPS 1 #define IP_NAT_RANGE_PROTO_SPECIFIED 2 #define IP_NAT_RANGE_PROTO_RANDOM 4 +#define IP_NAT_RANGE_PERSISTENT 8 /* NAT sequence number modifications */ struct nf_nat_seq { diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c index fe65187..3229e0a 100644 --- a/net/ipv4/netfilter/nf_nat_core.c +++ b/net/ipv4/netfilter/nf_nat_core.c @@ -211,7 +211,8 @@ find_best_ips_proto(struct nf_conntrack_tuple *tuple, minip = ntohl(range->min_ip); maxip = ntohl(range->max_ip); j = jhash_2words((__force u32)tuple->src.u3.ip, - (__force u32)tuple->dst.u3.ip, 0); + range->flags & IP_NAT_RANGE_PERSISTENT ? + (__force u32)tuple->dst.u3.ip : 0, 0); j = ((u64)j * (maxip - minip + 1)) >> 32; *var_ipp = htonl(minip + j); } -- cgit v0.10.2 From 5e075cb5cee4faecc82e2b8a04e640176629976e Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Thu, 16 Apr 2009 17:56:10 +0100 Subject: [ARM] 5454/1: ep93xx_eth: fix sparse warnings Fix 50+ sparse warnings in the ep93xx ethernet driver. warning: incorrect type in argument 1 (different address spaces) Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index cc77087..c140c9b 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -153,7 +153,7 @@ struct ep93xx_descs struct ep93xx_priv { struct resource *res; - void *base_addr; + void __iomem *base_addr; int irq; struct ep93xx_descs *descs; -- cgit v0.10.2 From 4ea3c51d5bd3bb4eea7d7d3a1f80d1a48c2a6f92 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Thu, 16 Apr 2009 07:53:09 -0500 Subject: x86: UV BAU distribution and payload MMRs This patch correctly sets BAU memory mapped registers to point to the sending activation descriptor table and target payload table. The "Broadcast Assist Unit" is used for TLB shootdown in UV. The memory mapped registers that point to sending and receiving memory structures contain node numbers. In one case the __pa() function did not provide the node id of memory on blade zero in configurations where that id is nonzero. In another case, it was assumed that memory was allocated on the local node. That assumption is not true in a configuration in which the node has no memory. Tested on the UV hardware simulator. [ Impact: fix possible runtime crash due to incorrect TLB logic ] Signed-off-by: Cliff Wickman LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 98307f9..7842233 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -717,7 +717,7 @@ uv_activation_descriptor_init(int node, int pnode) adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node); BUG_ON(!adp); - pa = __pa((unsigned long)adp); + pa = uv_gpa(adp); /* need the real nasid*/ n = pa >> uv_nshift; m = pa & uv_mmask; @@ -754,6 +754,8 @@ static struct bau_payload_queue_entry * __init uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) { struct bau_payload_queue_entry *pqp; + unsigned long pa; + int pn; char *cp; pqp = (struct bau_payload_queue_entry *) kmalloc_node( @@ -764,10 +766,14 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) cp = (char *)pqp + 31; pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); bau_tablesp->va_queue_first = pqp; + /* + * need the pnode of where the memory was really allocated + */ + pa = uv_gpa(pqp); + pn = pa >> uv_nshift; uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, - ((unsigned long)pnode << - UV_PAYLOADQ_PNODE_SHIFT) | + ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | uv_physnodeaddr(pqp)); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, uv_physnodeaddr(pqp)); -- cgit v0.10.2 From f544847fbaf099278343f875987a983f2b913134 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 14 Apr 2009 14:17:47 -0700 Subject: drm/i915: allow tiled front buffers on 965+ This patch corrects a pretty big oversight in the KMS code for 965+ chips. The current code is missing tiled surface register programming, so userland can allocate a tiled surface and use it for mode setting, resulting in corruption. This patch fixes that, allowing for tiled front buffers on 965+. Cc: stable@kernel.org Tested-by: Arkadiusz Miskiewicz Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index e805b59..5211947 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1446,6 +1446,7 @@ #define DISPPLANE_NO_LINE_DOUBLE 0 #define DISPPLANE_STEREO_POLARITY_FIRST 0 #define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +#define DISPPLANE_TILED (1<<10) #define DSPAADDR 0x70184 #define DSPASTRIDE 0x70188 #define DSPAPOS 0x7018C /* reserved */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c2c8e95..bdcda36 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -657,6 +657,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR); int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; + int dsptileoff = (pipe == 0 ? DSPATILEOFF : DSPBTILEOFF); int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; u32 dspcntr, alignment; int ret; @@ -733,6 +734,13 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, mutex_unlock(&dev->struct_mutex); return -EINVAL; } + if (IS_I965G(dev)) { + if (obj_priv->tiling_mode != I915_TILING_NONE) + dspcntr |= DISPPLANE_TILED; + else + dspcntr &= ~DISPPLANE_TILED; + } + I915_WRITE(dspcntr_reg, dspcntr); Start = obj_priv->gtt_offset; @@ -745,6 +753,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, I915_READ(dspbase); I915_WRITE(dspsurf, Start); I915_READ(dspsurf); + I915_WRITE(dsptileoff, (y << 16) | x); } else { I915_WRITE(dspbase, Start + Offset); I915_READ(dspbase); -- cgit v0.10.2 From c4cb768f027706b3a0190309416b13f07114fe56 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 14 Apr 2009 18:08:37 -0300 Subject: [IA64] export smp_send_reschedule KVM will use smp_send_reschedule to force a cpu out of guest mode. Signed-off-by: Marcelo Tosatti Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 2ea4199..c2d9823 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -225,6 +225,7 @@ smp_send_reschedule (int cpu) { platform_send_ipi(cpu, IA64_IPI_RESCHEDULE, IA64_IPI_DM_INT, 0); } +EXPORT_SYMBOL_GPL(smp_send_reschedule); /* * Called with preemption disabled. -- cgit v0.10.2 From edb91dc01a216e84b78721b71a06db1e0db141b7 Mon Sep 17 00:00:00 2001 From: Dimitri Sivanich Date: Wed, 15 Apr 2009 10:56:25 -0500 Subject: [IA64] smp_flush_tlb_mm() should only send IPI's to cpus in cpu_vm_mask Having flush_tlb_mm->smp_flush_tlb_mm() send an IPI to every cpu on the system is occasionally triggering spin_lock contention in generic_smp_call_function_interrupt(). Follow x86 arch's lead and only sends IPIs to the cpus in mm->cpu_vm_mask. Experiments with this change have shown significant improvement in this contention issue. Signed-off-by: Dimitri Sivanich Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index c2d9823..5230eaa 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -301,15 +301,12 @@ smp_flush_tlb_mm (struct mm_struct *mm) return; } + smp_call_function_mask(mm->cpu_vm_mask, + (void (*)(void *))local_finish_flush_tlb_mm, mm, 1); + local_irq_disable(); + local_finish_flush_tlb_mm(mm); + local_irq_enable(); preempt_enable(); - /* - * We could optimize this further by using mm->cpu_vm_mask to track which CPUs - * have been running in the address space. It's not clear that this is worth the - * trouble though: to avoid races, we have to raise the IPI on the target CPU - * anyhow, and once a CPU is interrupted, the cost of local_flush_tlb_all() is - * rather trivial. - */ - on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1); } void arch_send_call_function_single_ipi(int cpu) -- cgit v0.10.2 From 79b42babbac2a5a522b8e269fb2811b6e1063030 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 06:21:10 +0900 Subject: libata: handle SEMB signature better WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by: Tejun Heo Reported-by: David Haun Reported-by: Lars Wirzenius Reported-by: Juan Manuel Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 065507c..a61af38 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1231,6 +1231,9 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * * We follow the current spec and consider that 0x69/0x96 * identifies a port multiplier and 0x3c/0xc3 a SEMB device. + * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports + * SEMB signature. This is worked around in + * ata_dev_read_id(). */ if ((tf->lbam == 0) && (tf->lbah == 0)) { DPRINTK("found ATA device by sig\n"); @@ -1248,8 +1251,8 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) } if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { - printk(KERN_INFO "ata: SEMB device ignored\n"); - return ATA_DEV_SEMB_UNSUP; /* not yet */ + DPRINTK("found SEMB device by sig (could be ATA device)\n"); + return ATA_DEV_SEMB; } DPRINTK("unknown device\n"); @@ -2080,6 +2083,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, struct ata_taskfile tf; unsigned int err_mask = 0; const char *reason; + bool is_semb = class == ATA_DEV_SEMB; int may_fallback = 1, tried_spinup = 0; int rc; @@ -2090,6 +2094,8 @@ retry: ata_tf_init(dev, &tf); switch (class) { + case ATA_DEV_SEMB: + class = ATA_DEV_ATA; /* some hard drives report SEMB sig */ case ATA_DEV_ATA: tf.command = ATA_CMD_ID_ATA; break; @@ -2126,6 +2132,14 @@ retry: return -ENOENT; } + if (is_semb) { + ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on " + "device w/ SEMB sig, disabled\n"); + /* SEMB is not supported yet */ + *p_class = ATA_DEV_SEMB_UNSUP; + return 0; + } + if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { /* Device or controller might have reported * the wrong device class. Give a shot at the -- cgit v0.10.2 From 265b7215aed36941620b65ecfff516200fb190c1 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 14 Apr 2009 18:39:14 +0400 Subject: pata_hpt37x: fix HPT370 DMA timeouts The libata driver has copied the code from the IDE driver which caused a post 2.4.18 regression on many HPT370[A] chips -- DMA stopped to work completely, only causing timeouts. Now remove hpt370_bmdma_start() for good... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 81ab5700..122c786 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2007 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. * * TODO * Look into engine reset on timeout errors. Should not be required. @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.11" +#define DRV_VERSION "0.6.12" struct hpt_clock { u8 xfer_speed; @@ -445,23 +445,6 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) } /** - * hpt370_bmdma_start - DMA engine begin - * @qc: ATA command - * - * The 370 and 370A want us to reset the DMA engine each time we - * use it. The 372 and later are fine. - */ - -static void hpt370_bmdma_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); - udelay(10); - ata_bmdma_start(qc); -} - -/** * hpt370_bmdma_end - DMA engine stop * @qc: ATA command * @@ -598,7 +581,6 @@ static struct scsi_host_template hpt37x_sht = { static struct ata_port_operations hpt370_port_ops = { .inherits = &ata_bmdma_port_ops, - .bmdma_start = hpt370_bmdma_start, .bmdma_stop = hpt370_bmdma_stop, .mode_filter = hpt370_filter, -- cgit v0.10.2 From 20cbf5f8c0fe3df2ddbde1f334993b4dda18a651 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 14 Apr 2009 12:59:03 +0900 Subject: pata_legacy: fix no device fail path When pata_legacy can't detect any device, it unregisters the platform_device and fails detection. However, it forgets to detach ata host triggering weird failures as the host later gets freed by devres while still attached. Fix it. Signed-off-by: Tejun Heo Reported-by: Peter Zijlstra Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 3f830f0..0c6dde8 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -1032,6 +1032,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) return 0; } } + ata_host_detach(host); fail: platform_device_unregister(pdev); return ret; -- cgit v0.10.2 From 62afe5d744047df8ff15a369f4c1ebad71c937d4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 13 Apr 2009 20:50:00 +0400 Subject: libata: use ATA_ID_CFA_* Use ATA_ID_CFA_* constants for CFA specific identify data words 162 and 163. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index a61af38..17c5d48 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1656,8 +1656,8 @@ unsigned long ata_id_xfermask(const u16 *id) /* * Process compact flash extended modes */ - int pio = id[163] & 0x7; - int dma = (id[163] >> 3) & 7; + int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7; + int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7; if (pio) pio_mask |= (1 << 5); @@ -2426,7 +2426,8 @@ int ata_dev_configure(struct ata_device *dev) /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { if (ata_id_is_cfa(id)) { - if (id[162] & 1) /* CPRM may make this media unusable */ + /* CPRM may make this media unusable */ + if (id[ATA_ID_CFA_KEY_MGMT] & 1) ata_dev_printk(dev, KERN_WARNING, "supports DRM functions and may " "not be fully accessable.\n"); -- cgit v0.10.2 From e3cf95dd6d352954b663d2934110d6e30af2406d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 9 Apr 2009 17:31:17 +0100 Subject: ata: Report 16/32bit PIO as best we can The legacy old IDE ioctl API for this is a bit primitive so we try and map stuff sensibly onto it. - Set PIO over DMA devices to report 32bit - Add ability to change the PIO32 settings if the controller permits it - Add that functionality into the sff drivers - Add that functionality into the VLB legacy driver - Turn on the 32bit PIO on the ninja32 and add support there Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index b9747fa..2733b0c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -647,23 +647,45 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) return rc; } +static int ata_ioc32(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_PIO_DMA) + return 1; + if (ap->pflags & ATA_PFLAG_PIO32) + return 1; + return 0; +} + int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev, int cmd, void __user *arg) { int val = -EINVAL, rc = -EINVAL; + unsigned long flags; switch (cmd) { case ATA_IOC_GET_IO32: - val = 0; + spin_lock_irqsave(ap->lock, flags); + val = ata_ioc32(ap); + spin_unlock_irqrestore(ap->lock, flags); if (copy_to_user(arg, &val, 1)) return -EFAULT; return 0; case ATA_IOC_SET_IO32: val = (unsigned long) arg; - if (val != 0) - return -EINVAL; - return 0; + rc = 0; + spin_lock_irqsave(ap->lock, flags); + if (ap->pflags & ATA_PFLAG_PIO32CHANGE) { + if (val) + ap->pflags |= ATA_PFLAG_PIO32; + else + ap->pflags &= ~ATA_PFLAG_PIO32; + } else { + if (val != ata_ioc32(ap)) + rc = -EINVAL; + } + spin_unlock_irqrestore(ap->lock, flags); + return rc; case HDIO_GET_IDENTITY: return ata_get_identity(ap, scsidev, arg); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 8332e97..bb18415 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -87,6 +87,7 @@ const struct ata_port_operations ata_bmdma32_port_ops = { .inherits = &ata_bmdma_port_ops, .sff_data_xfer = ata_sff_data_xfer32, + .port_start = ata_sff_port_start32, }; EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); @@ -769,6 +770,9 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, void __iomem *data_addr = ap->ioaddr.data_addr; unsigned int words = buflen >> 2; int slop = buflen & 3; + + if (!(ap->pflags & ATA_PFLAG_PIO32)) + return ata_sff_data_xfer(dev, buf, buflen, rw); /* Transfer multiple of 4 bytes */ if (rw == READ) @@ -2402,6 +2406,29 @@ int ata_sff_port_start(struct ata_port *ap) EXPORT_SYMBOL_GPL(ata_sff_port_start); /** + * ata_sff_port_start32 - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table if the device + * is DMA capable SFF. + * + * May be used as the port_start() entry in ata_port_operations for + * devices that are capable of 32bit PIO. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sff_port_start32(struct ata_port *ap) +{ + ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + if (ap->ioaddr.bmdma_addr) + return ata_port_start(ap); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sff_port_start32); + +/** * ata_sff_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized * diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 0c6dde8..6f985be 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -108,6 +108,7 @@ struct legacy_controller { struct ata_port_operations *ops; unsigned int pio_mask; unsigned int flags; + unsigned int pflags; int (*setup)(struct platform_device *, struct legacy_probe *probe, struct legacy_data *data); }; @@ -285,7 +286,8 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, { int slop = buflen & 3; /* 32bit I/O capable *and* we need to write a whole number of dwords */ - if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) { + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { struct ata_port *ap = dev->link->ap; unsigned long flags; @@ -736,7 +738,8 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, struct ata_port *ap = adev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) { + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { if (rw == WRITE) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else @@ -858,27 +861,30 @@ static struct ata_port_operations winbond_port_ops = { static struct legacy_controller controllers[] = { {"BIOS", &legacy_port_ops, 0x1F, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"Snooping", &simple_port_ops, 0x1F, - 0 , NULL }, + 0, 0, NULL }, {"PDC20230", &pdc20230_port_ops, 0x7, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, NULL }, {"HT6560A", &ht6560a_port_ops, 0x07, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"HT6560B", &ht6560b_port_ops, 0x1F, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"OPTI82C611A", &opti82c611a_port_ops, 0x0F, - 0 , NULL }, + 0, 0, NULL }, {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, - 0 , NULL }, + 0, 0, NULL }, {"QDI6500", &qdi6500_port_ops, 0x07, - ATA_FLAG_NO_IORDY, qdi_port }, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port }, {"QDI6580", &qdi6580_port_ops, 0x1F, - 0 , qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port }, {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, - 0 , qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port }, {"W83759A", &winbond_port_ops, 0x1F, - 0 , winbond_port } + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, + winbond_port } }; /** @@ -1008,6 +1014,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) ap->ops = ops; ap->pio_mask = pio_modes; ap->flags |= ATA_FLAG_SLAVE_POSS | iordy; + ap->pflags |= controller->pflags; ap->ioaddr.cmd_addr = io_addr; ap->ioaddr.altstatus_addr = ctrl_addr; ap->ioaddr.ctl_addr = ctrl_addr; diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 0fb6b1b..dd53a66 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.1.3" +#define DRV_VERSION "0.1.5" /** @@ -86,6 +86,7 @@ static struct ata_port_operations ninja32_port_ops = { .sff_dev_select = ninja32_dev_select, .cable_detect = ata_cable_40wire, .set_piomode = ninja32_set_piomode, + .sff_data_xfer = ata_sff_data_xfer32 }; static void ninja32_program(void __iomem *base) @@ -144,6 +145,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.altstatus_addr = base + 0x1E; ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); + ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; ninja32_program(base); /* FIXME: Should we disable them at remove ? */ diff --git a/include/linux/libata.h b/include/linux/libata.h index b450a26..3d501db 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -209,6 +209,7 @@ enum { /* bits 24:31 of ap->flags are reserved for LLD specific flags */ + /* struct ata_port pflags */ ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */ ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */ @@ -225,6 +226,9 @@ enum { ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ + ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */ + ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */ + /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */ @@ -689,7 +693,10 @@ struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ struct ata_port_operations *ops; spinlock_t *lock; + /* Flags owned by the EH context. Only EH should touch these once the + port is active */ unsigned long flags; /* ATA_FLAG_xxx */ + /* Flags that change dynamically, protected by ap->lock */ unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int print_id; /* user visible unique port ID */ unsigned int port_no; /* 0 based port no. inside the host */ @@ -1595,6 +1602,7 @@ extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc); extern void ata_sff_error_handler(struct ata_port *ap); extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern int ata_sff_port_start(struct ata_port *ap); +extern int ata_sff_port_start32(struct ata_port *ap); extern void ata_sff_std_ports(struct ata_ioports *ioaddr); extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev, unsigned long xfer_mask); -- cgit v0.10.2 From 77f4025b5e7b290f5c3cc03aa6242328694c71d4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Apr 2009 21:17:56 +0100 Subject: [ARM] 5455/1: Fix IRQ noise from VIC code The VIC code will attempt to perform som default set_irq_chip() and set_irq_chip_data() on all IRQs supported by the VIC, while the new IRQ handling code strictly checks for the global NR_IRQS to be respected also for these IRQs. This patch will respect the interrupt mask passed to the VIC driver and will prevent it from attempting to call these functions on any unused interrupts. Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index ecf0bfb..b2a781d 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -85,12 +85,11 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, writel(32, base + VIC_PL190_DEF_VECT_ADDR); for (i = 0; i < 32; i++) { - unsigned int irq = irq_start + i; - - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - if (vic_sources & (1 << i)) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &vic_chip); + set_irq_chip_data(irq, base); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } -- cgit v0.10.2 From efcc2da3fd148c9acb7d7cf1d9800e0649f950fc Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 16 Apr 2009 15:11:54 -0600 Subject: powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of It's easier to find bindings descriptions in separate files. So factor out the MTD physmap bindings into a separate file to not clutter booting-without-of.txt more. Signed-off-by: Stefan Roese Signed-off-by: Grant Likely diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 0ab0230..d16b7a1 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -43,12 +43,11 @@ Table of Contents 2) Representing devices without a current OF specification a) PHY nodes b) Interrupt controllers - c) CFI or JEDEC memory-mapped NOR flash - d) 4xx/Axon EMAC ethernet nodes - e) Xilinx IP cores - f) USB EHCI controllers - g) MDIO on GPIOs - h) SPI busses + c) 4xx/Axon EMAC ethernet nodes + d) Xilinx IP cores + e) USB EHCI controllers + f) MDIO on GPIOs + g) SPI busses VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -999,7 +998,7 @@ compatibility. translation of SOC addresses for memory mapped SOC registers. - bus-frequency: Contains the bus frequency for the SOC node. Typically, the value of this field is filled in by the boot - loader. + loader. Recommended properties: @@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model. device_type = "open-pic"; }; - c) CFI or JEDEC memory-mapped NOR flash - - Flash chips (Memory Technology Devices) are often used for solid state - file systems on embedded devices. - - - compatible : should contain the specific model of flash chip(s) - used, if known, followed by either "cfi-flash" or "jedec-flash" - - reg : Address range of the flash chip - - bank-width : Width (in bytes) of the flash bank. Equal to the - device width times the number of interleaved chips. - - device-width : (optional) Width of a single flash chip. If - omitted, assumed to be equal to 'bank-width'. - - #address-cells, #size-cells : Must be present if the flash has - sub-nodes representing partitions (see below). In this case - both #address-cells and #size-cells must be equal to 1. - - For JEDEC compatible devices, the following additional properties - are defined: - - - vendor-id : Contains the flash chip's vendor id (1 byte). - - device-id : Contains the flash chip's device id (1 byte). - - In addition to the information on the flash bank itself, the - device tree may optionally contain additional information - describing partitions of the flash address space. This can be - used on platforms which have strong conventions about which - portions of the flash are used for what purposes, but which don't - use an on-flash partition table such as RedBoot. - - Each partition is represented as a sub-node of the flash device. - Each node's name represents the name of the corresponding - partition of the flash device. - - Flash partitions - - reg : The partition's offset and size within the flash bank. - - label : (optional) The label / name for this flash partition. - If omitted, the label is taken from the node name (excluding - the unit address). - - read-only : (optional) This parameter, if present, is a hint to - Linux that this flash partition should only be mounted - read-only. This is usually used for flash partitions - containing early-boot firmware images or data which should not - be clobbered. - - Example: - - flash@ff000000 { - compatible = "amd,am29lv128ml", "cfi-flash"; - reg = ; - bank-width = <4>; - device-width = <1>; - #address-cells = <1>; - #size-cells = <1>; - fs@0 { - label = "fs"; - reg = <0 f80000>; - }; - firmware@f80000 { - label ="firmware"; - reg = ; - read-only; - }; - }; - - d) 4xx/Axon EMAC ethernet nodes + c) 4xx/Axon EMAC ethernet nodes The EMAC ethernet controller in IBM and AMCC 4xx chips, and also the Axon bridge. To operate this needs to interact with a ths @@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model. available. For Axon: 0x0000012a - e) Xilinx IP cores + d) Xilinx IP cores The Xilinx EDK toolchain ships with a set of IP cores (devices) for use in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range @@ -1761,7 +1696,7 @@ platforms are moved over to use the flattened-device-tree model. listed above, nodes for these devices should include a phy-handle property, and may include other common network device properties like local-mac-address. - + iv) Xilinx Uartlite Xilinx uartlite devices are simple fixed speed serial ports. @@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model. - reg-offset : A value of 3 is required - reg-shift : A value of 2 is required - f) USB EHCI controllers + e) USB EHCI controllers Required properties: - compatible : should be "usb-ehci". @@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model. big-endian; }; - g) MDIO on GPIOs + f) MDIO on GPIOs Currently defined compatibles: - virtual,gpio-mdio @@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model. &qe_pio_c 6>; }; - h) SPI (Serial Peripheral Interface) busses + g) SPI (Serial Peripheral Interface) busses SPI busses can be described with a node for the SPI master device and a set of child nodes for each SPI slave on the bus. For this diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt new file mode 100644 index 0000000..cd474f9 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt @@ -0,0 +1,63 @@ +CFI or JEDEC memory-mapped NOR flash + +Flash chips (Memory Technology Devices) are often used for solid state +file systems on embedded devices. + + - compatible : should contain the specific model of flash chip(s) + used, if known, followed by either "cfi-flash" or "jedec-flash" + - reg : Address range of the flash chip + - bank-width : Width (in bytes) of the flash bank. Equal to the + device width times the number of interleaved chips. + - device-width : (optional) Width of a single flash chip. If + omitted, assumed to be equal to 'bank-width'. + - #address-cells, #size-cells : Must be present if the flash has + sub-nodes representing partitions (see below). In this case + both #address-cells and #size-cells must be equal to 1. + +For JEDEC compatible devices, the following additional properties +are defined: + + - vendor-id : Contains the flash chip's vendor id (1 byte). + - device-id : Contains the flash chip's device id (1 byte). + +In addition to the information on the flash bank itself, the +device tree may optionally contain additional information +describing partitions of the flash address space. This can be +used on platforms which have strong conventions about which +portions of the flash are used for what purposes, but which don't +use an on-flash partition table such as RedBoot. + +Each partition is represented as a sub-node of the flash device. +Each node's name represents the name of the corresponding +partition of the flash device. + +Flash partitions + - reg : The partition's offset and size within the flash bank. + - label : (optional) The label / name for this flash partition. + If omitted, the label is taken from the node name (excluding + the unit address). + - read-only : (optional) This parameter, if present, is a hint to + Linux that this flash partition should only be mounted + read-only. This is usually used for flash partitions + containing early-boot firmware images or data which should not + be clobbered. + +Example: + + flash@ff000000 { + compatible = "amd,am29lv128ml", "cfi-flash"; + reg = ; + bank-width = <4>; + device-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + fs@0 { + label = "fs"; + reg = <0 f80000>; + }; + firmware@f80000 { + label ="firmware"; + reg = ; + read-only; + }; + }; -- cgit v0.10.2 From c5a88dd90cf243a17c4a8c10e1ed973192ea5825 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 16 Apr 2009 15:11:54 -0600 Subject: powerpc/device-tree: Document MTD nodes with multiple "reg" tuples Add binding for mtd nodes with multiple reg tuples. Multiple reg tuples are used when the flash region covers multiple devices of the same type, but not necessarily the same size. Signed-off-by: Stefan Roese Signed-off-by: Grant Likely diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt index cd474f9..667c9bd 100644 --- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt +++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt @@ -5,7 +5,9 @@ file systems on embedded devices. - compatible : should contain the specific model of flash chip(s) used, if known, followed by either "cfi-flash" or "jedec-flash" - - reg : Address range of the flash chip + - reg : Address range(s) of the flash chip(s) + It's possible to (optionally) define multiple "reg" tuples so that + non-identical NOR chips can be described in one flash node. - bank-width : Width (in bytes) of the flash bank. Equal to the device width times the number of interleaved chips. - device-width : (optional) Width of a single flash chip. If @@ -61,3 +63,18 @@ Example: read-only; }; }; + +Here an example with multiple "reg" tuples: + + flash@f0000000,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,PC48F4400P0VB", "cfi-flash"; + reg = <0 0x00000000 0x02000000 + 0 0x02000000 0x02000000>; + bank-width = <2>; + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + }; -- cgit v0.10.2 From bda9de2c4fff8d7e9ac3ee66ce853716280a21ea Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 16 Apr 2009 15:11:54 -0600 Subject: powerpc/5200: Add FLASH nodes to lite5200 device tree Signed-off-by: Grant Likely diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index c63e356..d13cb11 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -293,4 +293,43 @@ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xfe000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <1>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "rootfs"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "u-boot"; + reg = <0x01f00000 0x00060000>; + }; + partition@1f60000 { + label = "u-boot-env"; + reg = <0x01f60000 0x00020000>; + }; + partition@1f80000 { + label = "dtb"; + reg = <0x01f80000 0x00080000>; + }; + }; + }; + }; -- cgit v0.10.2 From 05f54c13cd0c33694eec39a265475c5d6cf223cf Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 16 Apr 2009 21:55:29 +0100 Subject: Revert "kobject: don't block for each kobject_uevent". This reverts commit f520360d93cdc37de5d972dac4bf3bdef6a7f6a7. Tetsuo Handa, running a kernel with CONFIG_DEBUG_PAGEALLOC=y and CONFIG_UEVENT_HELPER_PATH=/sbin/hotplug, has been hitting RCU detected CPU stalls: it's been spinning in the loop where do_execve() counts up the args (but why wasn't fixup_exception working? dunno). The recent change, switching kobject_uevent_env() from UMH_WAIT_EXEC to UMH_NO_WAIT, is broken: the exec uses args on the local stack here, and an env which is kfreed as soon as call_usermodehelper() returns. It very much needs to wait for the exec to be done. An alternative would be to keep the UMH_NO_WAIT, and complicate the code to allocate and free these resources correctly? but no, as GregKH pointed out when making the commit, CONFIG_UEVENT_HELPER_PATH="" is a much better optimization - though some distros are still saying /sbin/hotplug in their .config, yet with no such binary in their initrd or their root. Reported-by: Tetsuo Handa Signed-off-by: Hugh Dickins Acked-by: Greg Kroah-Hartman Acked-by: Arjan van de Ven Acked-by: Will Newton Signed-off-by: Linus Torvalds diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 97a777a..dafeecf 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -258,7 +258,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, goto exit; retval = call_usermodehelper(argv[0], argv, - env->envp, UMH_NO_WAIT); + env->envp, UMH_WAIT_EXEC); } exit: -- cgit v0.10.2 From 05fa199d45c54a9bda7aa3ae6537253d6f097aa9 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 16 Apr 2009 21:58:12 +0100 Subject: mm: pass correct mm when growing stack Tetsuo Handa reports seeing the WARN_ON(current->mm == NULL) in security_vm_enough_memory(), when do_execve() is touching the target mm's stack, to set up its args and environment. Yes, a UMH_NO_WAIT or UMH_WAIT_PROC call_usermodehelper() spawns an mm-less kernel thread to do the exec. And in any case, that vm_enough_memory check when growing stack ought to be done on the target mm, not on the execer's mm (though apart from the warning, it only makes a slight tweak to OVERCOMMIT_NEVER behaviour). Reported-by: Tetsuo Handa Signed-off-by: Hugh Dickins Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/mm/mmap.c b/mm/mmap.c index 4a38411..3303d1b 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1575,7 +1575,7 @@ static int acct_stack_growth(struct vm_area_struct *vma, unsigned long size, uns * Overcommit.. This must be the final test, as it will * update security statistics. */ - if (security_vm_enough_memory(grow)) + if (security_vm_enough_memory_mm(mm, grow)) return -ENOMEM; /* Ok, everything looks good - let it rip */ -- cgit v0.10.2 From 4b065046273afa01ec8e3de7da407e8d3599251d Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Wed, 8 Apr 2009 15:37:16 -0700 Subject: x86, PAT: Remove page granularity tracking for vm_insert_pfn maps This change resolves the problem of too many single page entries in pat_memtype_list and "freeing invalid memtype" errors with i915, reported here: http://marc.info/?l=linux-kernel&m=123845244713183&w=2 Remove page level granularity track and untrack of vm_insert_pfn. memtype tracking at page granularity does not scale and cleaner approach would be for the driver to request a type for a bigger IO address range or PCI io memory range for that device, either at mmap time or driver init time and just use that type during vm_insert_pfn. This patch just removes the track/untrack of vm_insert_pfn. That means we will be in same state as 2.6.28, with respect to these APIs. Newer APIs for the drivers to request a memtype for a bigger region is coming soon. [ Impact: fix Xorg startup warnings and hangs ] Reported-by: Arkadiusz Miskiewicz Tested-by: Arkadiusz Miskiewicz Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Cc: Jesse Barnes LKML-Reference: <20090408223716.GC3493@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index cc5e0e2..41c8057 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -669,29 +669,28 @@ static void free_pfn_range(u64 paddr, unsigned long size) * * If the vma has a linear pfn mapping for the entire range, we get the prot * from pte and reserve the entire vma range with single reserve_pfn_range call. - * Otherwise, we reserve the entire vma range, my ging through the PTEs page - * by page to get physical address and protection. */ int track_pfn_vma_copy(struct vm_area_struct *vma) { - int retval = 0; - unsigned long i, j; resource_size_t paddr; unsigned long prot; - unsigned long vma_start = vma->vm_start; - unsigned long vma_end = vma->vm_end; - unsigned long vma_size = vma_end - vma_start; + unsigned long vma_size = vma->vm_end - vma->vm_start; pgprot_t pgprot; if (!pat_enabled) return 0; + /* + * For now, only handle remap_pfn_range() vmas where + * is_linear_pfn_mapping() == TRUE. Handling of + * vm_insert_pfn() is TBD. + */ if (is_linear_pfn_mapping(vma)) { /* * reserve the whole chunk covered by vma. We need the * starting address and protection from pte. */ - if (follow_phys(vma, vma_start, 0, &prot, &paddr)) { + if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) { WARN_ON_ONCE(1); return -EINVAL; } @@ -699,28 +698,7 @@ int track_pfn_vma_copy(struct vm_area_struct *vma) return reserve_pfn_range(paddr, vma_size, &pgprot, 1); } - /* reserve entire vma page by page, using pfn and prot from pte */ - for (i = 0; i < vma_size; i += PAGE_SIZE) { - if (follow_phys(vma, vma_start + i, 0, &prot, &paddr)) - continue; - - pgprot = __pgprot(prot); - retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1); - if (retval) - goto cleanup_ret; - } return 0; - -cleanup_ret: - /* Reserve error: Cleanup partial reservation and return error */ - for (j = 0; j < i; j += PAGE_SIZE) { - if (follow_phys(vma, vma_start + j, 0, &prot, &paddr)) - continue; - - free_pfn_range(paddr, PAGE_SIZE); - } - - return retval; } /* @@ -730,50 +708,28 @@ cleanup_ret: * prot is passed in as a parameter for the new mapping. If the vma has a * linear pfn mapping for the entire range reserve the entire vma range with * single reserve_pfn_range call. - * Otherwise, we look t the pfn and size and reserve only the specified range - * page by page. - * - * Note that this function can be called with caller trying to map only a - * subrange/page inside the vma. */ int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot, unsigned long pfn, unsigned long size) { - int retval = 0; - unsigned long i, j; - resource_size_t base_paddr; resource_size_t paddr; - unsigned long vma_start = vma->vm_start; - unsigned long vma_end = vma->vm_end; - unsigned long vma_size = vma_end - vma_start; + unsigned long vma_size = vma->vm_end - vma->vm_start; if (!pat_enabled) return 0; + /* + * For now, only handle remap_pfn_range() vmas where + * is_linear_pfn_mapping() == TRUE. Handling of + * vm_insert_pfn() is TBD. + */ if (is_linear_pfn_mapping(vma)) { /* reserve the whole chunk starting from vm_pgoff */ paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT; return reserve_pfn_range(paddr, vma_size, prot, 0); } - /* reserve page by page using pfn and size */ - base_paddr = (resource_size_t)pfn << PAGE_SHIFT; - for (i = 0; i < size; i += PAGE_SIZE) { - paddr = base_paddr + i; - retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0); - if (retval) - goto cleanup_ret; - } return 0; - -cleanup_ret: - /* Reserve error: Cleanup partial reservation and return error */ - for (j = 0; j < i; j += PAGE_SIZE) { - paddr = base_paddr + j; - free_pfn_range(paddr, PAGE_SIZE); - } - - return retval; } /* @@ -784,39 +740,23 @@ cleanup_ret: void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn, unsigned long size) { - unsigned long i; resource_size_t paddr; - unsigned long prot; - unsigned long vma_start = vma->vm_start; - unsigned long vma_end = vma->vm_end; - unsigned long vma_size = vma_end - vma_start; + unsigned long vma_size = vma->vm_end - vma->vm_start; if (!pat_enabled) return; + /* + * For now, only handle remap_pfn_range() vmas where + * is_linear_pfn_mapping() == TRUE. Handling of + * vm_insert_pfn() is TBD. + */ if (is_linear_pfn_mapping(vma)) { /* free the whole chunk starting from vm_pgoff */ paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT; free_pfn_range(paddr, vma_size); return; } - - if (size != 0 && size != vma_size) { - /* free page by page, using pfn and size */ - paddr = (resource_size_t)pfn << PAGE_SHIFT; - for (i = 0; i < size; i += PAGE_SIZE) { - paddr = paddr + i; - free_pfn_range(paddr, PAGE_SIZE); - } - } else { - /* free entire vma, page by page, using the pfn from pte */ - for (i = 0; i < vma_size; i += PAGE_SIZE) { - if (follow_phys(vma, vma_start + i, 0, &prot, &paddr)) - continue; - - free_pfn_range(paddr, PAGE_SIZE); - } - } } pgprot_t pgprot_writecombine(pgprot_t prot) -- cgit v0.10.2 From 381512cf3d27f63f7a45b1bbe7d2d609c2ea3b74 Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Tue, 14 Apr 2009 09:09:36 +0530 Subject: sched: Avoid printing sched_group::__cpu_power for default case Commit 46e0bb9c12f4 ("sched: Print sched_group::__cpu_power in sched_domain_debug") produces a messy dmesg output while attempting to print the sched_group::__cpu_power for each group in the sched_domain hierarchy. Fix this by avoid printing the __cpu_power for default cases. (i.e, __cpu_power == SCHED_LOAD_SCALE). [ Impact: reduce syslog clutter ] Reported-by: Tony Luck Signed-off-by: Gautham R Shenoy Fixed-by: Tony Luck Cc: a.p.zijlstra@chello.nl LKML-Reference: <20090414033936.GA534@in.ibm.com> Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index e90e70e..b902e58 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7367,8 +7367,12 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, cpumask_or(groupmask, groupmask, sched_group_cpus(group)); cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group)); - printk(KERN_CONT " %s (__cpu_power = %d)", str, - group->__cpu_power); + + printk(KERN_CONT " %s", str); + if (group->__cpu_power != SCHED_LOAD_SCALE) { + printk(KERN_CONT " (__cpu_power = %d)", + group->__cpu_power); + } group = group->next; } while (group != sd->groups); -- cgit v0.10.2 From 0917798d82212f884fff650e7e520de3b438f947 Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Wed, 15 Apr 2009 16:51:48 +0200 Subject: x86: fix microcode driver newly spewing warnings Jeff Garzik reported this WARN_ON() noise: > Kernel: 2.6.30-rc1-00306-g8371f87 > Hardware: ICH10 x86-64 > > This is a regression from 2.6.29. Microcode spews the following WARNING > multiple times during boot: > > ------------[ cut here ]------------ > WARNING: at fs/sysfs/group.c:138 sysfs_remove_group+0xeb/0xf0() > Hardware name: sysfs group ffffffffa0209700 not found for > kobject 'cpu0' Keep sysfs files around for cpus even when we failed to locate microcode for them at the moment of module loading. The appropriate microcode firmware can become available later on. Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index a0f3851..4d420de 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -391,8 +391,6 @@ static int mc_sysdev_add(struct sys_device *sys_dev) return err; err = microcode_init_cpu(cpu); - if (err) - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); return err; } -- cgit v0.10.2 From d110271e1f4140a9fb06d968b1afe9ca56a6064e Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 25 Mar 2009 15:11:36 -0600 Subject: sysfs: don't use global workqueue in sysfs_schedule_callback() A sysfs attribute using sysfs_schedule_callback() to commit suicide may end up calling device_unregister(), which will eventually call a driver's ->remove function. Drivers may call flush_scheduled_work() in their shutdown routines, in which case lockdep will complain with something like the following: ============================================= [ INFO: possible recursive locking detected ] 2.6.29-rc8-kk #1 --------------------------------------------- events/4/56 is trying to acquire lock: (events){--..}, at: [] flush_workqueue+0x0/0xa0 but task is already holding lock: (events){--..}, at: [] run_workqueue+0x108/0x230 other info that might help us debug this: 3 locks held by events/4/56: #0: (events){--..}, at: [] run_workqueue+0x108/0x230 #1: (&ss->work){--..}, at: [] run_workqueue+0x108/0x230 #2: (pci_remove_rescan_mutex){--..}, at: [] remove_callback+0x21/0x40 stack backtrace: Pid: 56, comm: events/4 Not tainted 2.6.29-rc8-kk #1 Call Trace: [] validate_chain+0xb7d/0x1260 [] __lock_acquire+0x42e/0xa40 [] lock_acquire+0x58/0x80 [] ? flush_workqueue+0x0/0xa0 [] flush_workqueue+0x4d/0xa0 [] ? flush_workqueue+0x0/0xa0 [] flush_scheduled_work+0x10/0x20 [] e1000_remove+0x55/0xfe [e1000e] [] ? sysfs_schedule_callback_work+0x0/0x50 [] pci_device_remove+0x32/0x70 [] __device_release_driver+0x59/0x90 [] device_release_driver+0x2b/0x40 [] bus_remove_device+0xa6/0x120 [] device_del+0x12b/0x190 [] device_unregister+0x26/0x70 [] pci_stop_dev+0x49/0x60 [] pci_remove_bus_device+0x40/0xc0 [] remove_callback+0x29/0x40 [] sysfs_schedule_callback_work+0x1f/0x50 [] run_workqueue+0x15a/0x230 [] ? run_workqueue+0x108/0x230 [] worker_thread+0x9f/0x100 [] ? autoremove_wake_function+0x0/0x40 [] ? worker_thread+0x0/0x100 [] kthread+0x4d/0x80 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x80 [] ? child_rip+0x0/0x20 Although we know that the device_unregister path will never acquire a lock that a driver might try to acquire in its ->remove, in general we should never attempt to flush a workqueue from within the same workqueue, and lockdep rightly complains. So as long as sysfs attributes cannot commit suicide directly and we are stuck with this callback mechanism, put the sysfs callbacks on their own workqueue instead of the global one. This has the side benefit that if a suicidal sysfs attribute kicks off a long chain of ->remove callbacks, we no longer induce a long delay on the global queue. This also fixes a missing module_put in the error path introduced by sysfs-only-allow-one-scheduled-removal-callback-per-kobj.patch. We never destroy the workqueue, but I'm not sure that's a problem. Reported-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 289c43a..979e937 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -667,6 +667,7 @@ struct sysfs_schedule_callback_struct { struct work_struct work; }; +static struct workqueue_struct *sysfs_workqueue; static DEFINE_MUTEX(sysfs_workq_mutex); static LIST_HEAD(sysfs_workq); static void sysfs_schedule_callback_work(struct work_struct *work) @@ -715,11 +716,20 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), mutex_lock(&sysfs_workq_mutex); list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list) if (ss->kobj == kobj) { + module_put(owner); mutex_unlock(&sysfs_workq_mutex); return -EAGAIN; } mutex_unlock(&sysfs_workq_mutex); + if (sysfs_workqueue == NULL) { + sysfs_workqueue = create_workqueue("sysfsd"); + if (sysfs_workqueue == NULL) { + module_put(owner); + return -ENOMEM; + } + } + ss = kmalloc(sizeof(*ss), GFP_KERNEL); if (!ss) { module_put(owner); @@ -735,7 +745,7 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), mutex_lock(&sysfs_workq_mutex); list_add_tail(&ss->workq_list, &sysfs_workq); mutex_unlock(&sysfs_workq_mutex); - schedule_work(&ss->work); + queue_work(sysfs_workqueue, &ss->work); return 0; } EXPORT_SYMBOL_GPL(sysfs_schedule_callback); -- cgit v0.10.2 From 5247aecfe62266ffdedf2fc9e4243638554455b6 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 27 Mar 2009 21:50:00 +0800 Subject: driver core: fix driver_match_device This patch fixes a bug introduced in commit 49b420a13ff95b449947181190b08367348e3e1b. If a instance of bus_type doesn't have .match method, all .probe of drivers in the bus should be called, or else the .probe have not a chance to be called. Signed-off-by: Ming Lei Reported-by: Guennadi Liakhovetski Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/base.h b/drivers/base/base.h index ddc9749..b528145 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -115,7 +115,7 @@ extern int driver_probe_device(struct device_driver *drv, struct device *dev); static inline int driver_match_device(struct device_driver *drv, struct device *dev) { - return drv->bus->match && drv->bus->match(dev, drv); + return drv->bus->match ? drv->bus->match(dev, drv) : 1; } extern void sysdev_shutdown(void); -- cgit v0.10.2 From d094cbe998eb566d47552aa9d3c26c9123a7b858 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 3 Apr 2009 19:04:15 +0200 Subject: driver core: allow non-root users to listen to uevents Users can read sysfs files, there is no reason they should not be allowed to listen to uevents. This lets xorg and other userspace programs properly get these messages without having to be root. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index dafeecf..920a3ca 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -328,7 +328,7 @@ static int __init kobject_uevent_init(void) "kobject_uevent: unable to create netlink socket!\n"); return -ENODEV; } - + netlink_set_nonroot(NETLINK_KOBJECT_UEVENT, NL_NONROOT_RECV); return 0; } -- cgit v0.10.2 From 1af3557abdef34ee036a6de4cb79e24468544b8d Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 9 Apr 2009 13:53:22 +0900 Subject: sysfs: sysfs poll keep the poll rule of regular file. Currently, following test programs don't finished. % ruby -e ' Thread.new { sleep } File.read("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies") ' strace expose the reason. ... open("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbf9fa6b8) = -1 ENOTTY (Inappropriate ioctl for device) fstat64(3, {st_mode=S_IFREG|0444, st_size=4096, ...}) = 0 _llseek(3, 0, [0], SEEK_CUR) = 0 select(4, [3], NULL, NULL, NULL) = 1 (in [3]) read(3, "1400000 1300000 1200000 1100000 1"..., 4096) = 62 select(4, [3], NULL, NULL, NULL Because Ruby (the scripting language) VM assume select system-call against regular file don't block. it because SUSv3 says "Regular files shall always poll TRUE for reading and writing". see http://www.opengroup.org/onlinepubs/009695399/functions/poll.html it seems valid assumption. But sysfs_poll() don't keep this rule although sysfs file can read and write always. This patch restore proper poll behavior to sysfs. /sys/block/md*/md/sync_action polling application and another sysfs updating sensitive application still can use POLLERR and POLLPRI. Cc: Neil Brown Signed-off-by: KOSAKI Motohiro Signed-off-by: Greg Kroah-Hartman diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 979e937..b1606e0 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -446,11 +446,11 @@ static unsigned int sysfs_poll(struct file *filp, poll_table *wait) if (buffer->event != atomic_read(&od->event)) goto trigger; - return 0; + return DEFAULT_POLLMASK; trigger: buffer->needs_read_fill = 1; - return POLLERR|POLLPRI; + return DEFAULT_POLLMASK|POLLERR|POLLPRI; } void sysfs_notify_dirent(struct sysfs_dirent *sd) -- cgit v0.10.2 From 31b07093c44a7a442394d44423e21d783f5523b8 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 9 Apr 2009 13:57:59 +0900 Subject: proc: mounts_poll() make consistent to mdstat_poll In recently sysfs_poll discussion, Neil Brown pointed out /proc/mounts also should be fixed. SUSv3 says "Regular files shall always poll TRUE for reading and writing". see http://www.opengroup.org/onlinepubs/009695399/functions/poll.html Then, mounts_poll()'s default should be "POLLIN | POLLRDNORM". it mean always readable. In addition, event trigger should use "POLLERR | POLLPRI" instead POLLERR. it makes consistent to mdstat_poll() and sysfs_poll(). and, select(2) can handle POLLPRI easily. Reported-by: Neil Brown Signed-off-by: KOSAKI Motohiro Cc: Ram Pai Cc: Miklos Szeredi Cc: Al Viro Signed-off-by: Greg Kroah-Hartman diff --git a/fs/proc/base.c b/fs/proc/base.c index f715597..aa763ab 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -648,14 +648,14 @@ static unsigned mounts_poll(struct file *file, poll_table *wait) { struct proc_mounts *p = file->private_data; struct mnt_namespace *ns = p->ns; - unsigned res = 0; + unsigned res = POLLIN | POLLRDNORM; poll_wait(file, &ns->poll, wait); spin_lock(&vfsmount_lock); if (p->event != ns->event) { p->event = ns->event; - res = POLLERR; + res |= POLLERR | POLLPRI; } spin_unlock(&vfsmount_lock); -- cgit v0.10.2 From 13977091a988fb0d21821c2221ddc920eba36b79 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 30 Mar 2009 14:37:25 -0700 Subject: Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm Cc: Paul Mundt Cc: Kay Sievers Cc: David Brownell Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt index 83009fdc..2e2c2ea 100644 --- a/Documentation/driver-model/platform.txt +++ b/Documentation/driver-model/platform.txt @@ -169,3 +169,62 @@ three different ways to find such a match: be probed later if another device registers. (Which is OK, since this interface is only for use with non-hotpluggable devices.) + +Early Platform Devices and Drivers +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The early platform interfaces provide platform data to platform device +drivers early on during the system boot. The code is built on top of the +early_param() command line parsing and can be executed very early on. + +Example: "earlyprintk" class early serial console in 6 steps + +1. Registering early platform device data +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code registers platform device data using the function +early_platform_add_devices(). In the case of early serial console this +should be hardware configuration for the serial port. Devices registered +at this point will later on be matched against early platform drivers. + +2. Parsing kernel command line +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code calls parse_early_param() to parse the kernel +command line. This will execute all matching early_param() callbacks. +User specified early platform devices will be registered at this point. +For the early serial console case the user can specify port on the +kernel command line as "earlyprintk=serial.0" where "earlyprintk" is +the class string, "serial" is the name of the platfrom driver and +0 is the platform device id. If the id is -1 then the dot and the +id can be omitted. + +3. Installing early platform drivers belonging to a certain class +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code may optionally force registration of all early +platform drivers belonging to a certain class using the function +early_platform_driver_register_all(). User specified devices from +step 2 have priority over these. This step is omitted by the serial +driver example since the early serial driver code should be disabled +unless the user has specified port on the kernel command line. + +4. Early platform driver registration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Compiled-in platform drivers making use of early_platform_init() are +automatically registered during step 2 or 3. The serial driver example +should use early_platform_init("earlyprintk", &platform_driver). + +5. Probing of early platform drivers belonging to a certain class +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code calls early_platform_driver_probe() to match +registered early platform devices associated with a certain class with +registered early platform drivers. Matched devices will get probed(). +This step can be executed at any point during the early boot. As soon +as possible may be good for the serial port case. + +6. Inside the early platform driver probe() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver code needs to take special care during early boot, especially +when it comes to memory allocation and interrupt registration. The code +in the probe() function can use is_early_platform_device() to check if +it is called at early platform device or at the regular platform device +time. The early serial driver performs register_console() at this point. + +For further information, see . diff --git a/drivers/base/platform.c b/drivers/base/platform.c index d2198f6..b5b6c97 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -990,6 +990,8 @@ int __init platform_bus_init(void) { int error; + early_platform_cleanup(); + error = device_register(&platform_bus); if (error) return error; @@ -1020,3 +1022,240 @@ u64 dma_get_required_mask(struct device *dev) } EXPORT_SYMBOL_GPL(dma_get_required_mask); #endif + +static __initdata LIST_HEAD(early_platform_driver_list); +static __initdata LIST_HEAD(early_platform_device_list); + +/** + * early_platform_driver_register + * @edrv: early_platform driver structure + * @buf: string passed from early_param() + */ +int __init early_platform_driver_register(struct early_platform_driver *epdrv, + char *buf) +{ + unsigned long index; + int n; + + /* Simply add the driver to the end of the global list. + * Drivers will by default be put on the list in compiled-in order. + */ + if (!epdrv->list.next) { + INIT_LIST_HEAD(&epdrv->list); + list_add_tail(&epdrv->list, &early_platform_driver_list); + } + + /* If the user has specified device then make sure the driver + * gets prioritized. The driver of the last device specified on + * command line will be put first on the list. + */ + n = strlen(epdrv->pdrv->driver.name); + if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) { + list_move(&epdrv->list, &early_platform_driver_list); + + if (!strcmp(buf, epdrv->pdrv->driver.name)) + epdrv->requested_id = -1; + else if (buf[n] == '.' && strict_strtoul(&buf[n + 1], 10, + &index) == 0) + epdrv->requested_id = index; + else + epdrv->requested_id = EARLY_PLATFORM_ID_ERROR; + } + + return 0; +} + +/** + * early_platform_add_devices - add a numbers of early platform devices + * @devs: array of early platform devices to add + * @num: number of early platform devices in array + */ +void __init early_platform_add_devices(struct platform_device **devs, int num) +{ + struct device *dev; + int i; + + /* simply add the devices to list */ + for (i = 0; i < num; i++) { + dev = &devs[i]->dev; + + if (!dev->devres_head.next) { + INIT_LIST_HEAD(&dev->devres_head); + list_add_tail(&dev->devres_head, + &early_platform_device_list); + } + } +} + +/** + * early_platform_driver_register_all + * @class_str: string to identify early platform driver class + */ +void __init early_platform_driver_register_all(char *class_str) +{ + /* The "class_str" parameter may or may not be present on the kernel + * command line. If it is present then there may be more than one + * matching parameter. + * + * Since we register our early platform drivers using early_param() + * we need to make sure that they also get registered in the case + * when the parameter is missing from the kernel command line. + * + * We use parse_early_options() to make sure the early_param() gets + * called at least once. The early_param() may be called more than + * once since the name of the preferred device may be specified on + * the kernel command line. early_platform_driver_register() handles + * this case for us. + */ + parse_early_options(class_str); +} + +/** + * early_platform_match + * @edrv: early platform driver structure + * @id: id to match against + */ +static __init struct platform_device * +early_platform_match(struct early_platform_driver *epdrv, int id) +{ + struct platform_device *pd; + + list_for_each_entry(pd, &early_platform_device_list, dev.devres_head) + if (platform_match(&pd->dev, &epdrv->pdrv->driver)) + if (pd->id == id) + return pd; + + return NULL; +} + +/** + * early_platform_left + * @edrv: early platform driver structure + * @id: return true if id or above exists + */ +static __init int early_platform_left(struct early_platform_driver *epdrv, + int id) +{ + struct platform_device *pd; + + list_for_each_entry(pd, &early_platform_device_list, dev.devres_head) + if (platform_match(&pd->dev, &epdrv->pdrv->driver)) + if (pd->id >= id) + return 1; + + return 0; +} + +/** + * early_platform_driver_probe_id + * @class_str: string to identify early platform driver class + * @id: id to match against + * @nr_probe: number of platform devices to successfully probe before exiting + */ +static int __init early_platform_driver_probe_id(char *class_str, + int id, + int nr_probe) +{ + struct early_platform_driver *epdrv; + struct platform_device *match; + int match_id; + int n = 0; + int left = 0; + + list_for_each_entry(epdrv, &early_platform_driver_list, list) { + /* only use drivers matching our class_str */ + if (strcmp(class_str, epdrv->class_str)) + continue; + + if (id == -2) { + match_id = epdrv->requested_id; + left = 1; + + } else { + match_id = id; + left += early_platform_left(epdrv, id); + + /* skip requested id */ + switch (epdrv->requested_id) { + case EARLY_PLATFORM_ID_ERROR: + case EARLY_PLATFORM_ID_UNSET: + break; + default: + if (epdrv->requested_id == id) + match_id = EARLY_PLATFORM_ID_UNSET; + } + } + + switch (match_id) { + case EARLY_PLATFORM_ID_ERROR: + pr_warning("%s: unable to parse %s parameter\n", + class_str, epdrv->pdrv->driver.name); + /* fall-through */ + case EARLY_PLATFORM_ID_UNSET: + match = NULL; + break; + default: + match = early_platform_match(epdrv, match_id); + } + + if (match) { + if (epdrv->pdrv->probe(match)) + pr_warning("%s: unable to probe %s early.\n", + class_str, match->name); + else + n++; + } + + if (n >= nr_probe) + break; + } + + if (left) + return n; + else + return -ENODEV; +} + +/** + * early_platform_driver_probe + * @class_str: string to identify early platform driver class + * @nr_probe: number of platform devices to successfully probe before exiting + * @user_only: only probe user specified early platform devices + */ +int __init early_platform_driver_probe(char *class_str, + int nr_probe, + int user_only) +{ + int k, n, i; + + n = 0; + for (i = -2; n < nr_probe; i++) { + k = early_platform_driver_probe_id(class_str, i, nr_probe - n); + + if (k < 0) + break; + + n += k; + + if (user_only) + break; + } + + return n; +} + +/** + * early_platform_cleanup - clean up early platform code + */ +void __init early_platform_cleanup(void) +{ + struct platform_device *pd, *pd2; + + /* clean up the devres list used to chain devices */ + list_for_each_entry_safe(pd, pd2, &early_platform_device_list, + dev.devres_head) { + list_del(&pd->dev.devres_head); + memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head)); + } +} + diff --git a/include/linux/init.h b/include/linux/init.h index 68cb026..f121a7a 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -247,6 +247,7 @@ struct obs_kernel_param { /* Relies on boot_command_line being set */ void __init parse_early_param(void); +void __init parse_early_options(char *cmdline); #endif /* __ASSEMBLY__ */ /** diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 76e470a..72736fd 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -77,4 +77,46 @@ extern int platform_driver_probe(struct platform_driver *driver, #define platform_get_drvdata(_dev) dev_get_drvdata(&(_dev)->dev) #define platform_set_drvdata(_dev,data) dev_set_drvdata(&(_dev)->dev, (data)) +/* early platform driver interface */ +struct early_platform_driver { + const char *class_str; + struct platform_driver *pdrv; + struct list_head list; + int requested_id; +}; + +#define EARLY_PLATFORM_ID_UNSET -2 +#define EARLY_PLATFORM_ID_ERROR -3 + +extern int early_platform_driver_register(struct early_platform_driver *epdrv, + char *buf); +extern void early_platform_add_devices(struct platform_device **devs, int num); + +static inline int is_early_platform_device(struct platform_device *pdev) +{ + return !pdev->dev.driver; +} + +extern void early_platform_driver_register_all(char *class_str); +extern int early_platform_driver_probe(char *class_str, + int nr_probe, int user_only); +extern void early_platform_cleanup(void); + + +#ifndef MODULE +#define early_platform_init(class_string, platform_driver) \ +static __initdata struct early_platform_driver early_driver = { \ + .class_str = class_string, \ + .pdrv = platform_driver, \ + .requested_id = EARLY_PLATFORM_ID_UNSET, \ +}; \ +static int __init early_platform_driver_setup_func(char *buf) \ +{ \ + return early_platform_driver_register(&early_driver, buf); \ +} \ +early_param(class_string, early_platform_driver_setup_func) +#else /* MODULE */ +#define early_platform_init(class_string, platform_driver) +#endif /* MODULE */ + #endif /* _PLATFORM_DEVICE_H_ */ diff --git a/init/main.c b/init/main.c index 3585f07..3bbf93b 100644 --- a/init/main.c +++ b/init/main.c @@ -492,6 +492,11 @@ static int __init do_early_param(char *param, char *val) return 0; } +void __init parse_early_options(char *cmdline) +{ + parse_args("early options", cmdline, NULL, 0, do_early_param); +} + /* Arch code calls this early on, or if not, just before other parsing. */ void __init parse_early_param(void) { @@ -503,7 +508,7 @@ void __init parse_early_param(void) /* All fall through to do_early_param. */ strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE); - parse_args("early options", tmp_cmdline, NULL, 0, do_early_param); + parse_early_options(tmp_cmdline); done = 1; } -- cgit v0.10.2 From 4ccb457966391295bd9b3644f6bdc9ddd97b6051 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 9 Apr 2009 14:48:24 -0700 Subject: dynamic debug: resurrect old pr_debug() semantics as pr_devel() pr_debug() used to produce zero code unless DEBUG was #defined. This is now no longer the case in practice[1]. There are places where it's useful to have debugging printks, but we don't want them to generate any code in production kernels. So add a new macro, pr_devel(), for _devel_opment, to provide the old semantics, ie. if the programmer doesn't explicitly enable debugging, no code is produced. [1]: You can turn CONFIG_DYNAMIC_DEBUG off, but it's enabled in at least one distro kernel, so it's not really a solution. Signed-off-by: Michael Ellerman Cc: Jason Baron Cc: Greg Banks Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d9e75ec..883cd44 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -377,6 +377,15 @@ static inline char *pack_hex_byte(char *buf, u8 byte) #define pr_cont(fmt, ...) \ printk(KERN_CONT fmt, ##__VA_ARGS__) +/* pr_devel() should produce zero code unless DEBUG is defined */ +#ifdef DEBUG +#define pr_devel(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_devel(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + /* If you are writing a driver, please use dev_dbg instead */ #if defined(DEBUG) #define pr_debug(fmt, ...) \ -- cgit v0.10.2 From 014c90dbb9b63bae067afc80a7931a76c5268ae3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 15 Apr 2009 16:00:12 -0700 Subject: driver core: prevent device_for_each_child from oopsing David Vrabel noticed that the wireless usb stack likes to call device_for_each_chile() with an empty bus. This used to work fine, but now oopses. This patch fixes the oops and makes the code behave like it used to. Reported-by: David Vrabel Tested-by: David Vrabel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/core.c b/drivers/base/core.c index e73c92d..d230ff4 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1142,6 +1142,9 @@ int device_for_each_child(struct device *parent, void *data, struct device *child; int error = 0; + if (!parent->p) + return 0; + klist_iter_init(&parent->p->klist_children, &i); while ((child = next_device(&i)) && !error) error = fn(child, data); -- cgit v0.10.2 From 7607b1d673469d5b5dce4c9b6779d165e03c8ff5 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Wed, 8 Apr 2009 12:12:52 -0400 Subject: Driver core: remove pr_fmt() from dynamic_dev_dbg() printk When pr_fmt() was added to the pr_debug() code, we added it not only to the dynamic_pr_debug() function, but also to the dynamic_dev_dbg() funciton. However, dev_dbg() doesn't make use of pr_fmt(), so neither should dynamic_dev_dbg(). Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index baabf33..a0d9422 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -70,7 +70,7 @@ extern int ddebug_remove_module(char *mod_name); DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ if (__dynamic_dbg_enabled(descriptor)) \ dev_printk(KERN_DEBUG, dev, \ - KBUILD_MODNAME ": " pr_fmt(fmt),\ + KBUILD_MODNAME ": " fmt, \ ##__VA_ARGS__); \ } while (0) -- cgit v0.10.2 From 912335c43bb10d124471bf063a85e132aa814214 Mon Sep 17 00:00:00 2001 From: "Hans J. Koch" Date: Sat, 11 Apr 2009 04:18:25 +0200 Subject: UIO: fix specific device driver missing statement for depmod On Fri, Apr 10, 2009 at 01:50:50PM -0700, Andrew Morton wrote: > On Fri, 10 Apr 2009 13:32:01 GMT > bugzilla-daemon@bugzilla.kernel.org wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=13059 drivers/uio/uio_cif.c misses a MODULE_DEVICE_TABLE, this fixes it. Signed-off-by: Hans J. Koch Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c index c60b8fc..28034c8 100644 --- a/drivers/uio/uio_cif.c +++ b/drivers/uio/uio_cif.c @@ -147,5 +147,6 @@ static void __exit hilscher_exit_module(void) module_init(hilscher_init_module); module_exit(hilscher_exit_module); +MODULE_DEVICE_TABLE(pci, hilscher_pci_ids); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger"); -- cgit v0.10.2 From 2238aff5bbd9d928b69e579b4c95842f97da95ba Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Thu, 16 Apr 2009 16:27:23 -0700 Subject: ixgbe: Be explict with what we are !'ing in ixgbe_sfp_config_module_task() GCC warns: drivers/net/ixgbe/ixgbe_main.c: In function 'ixgbe_sfp_config_module_task': drivers/net/ixgbe/ixgbe_main.c:3920: warning: suggest parantheses around operand of '!' or change '&' to '&&' or '!' to '~' Which I think is right. Bracket to remove ambiguity. Signed-off-by: Tony Breeds Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index febde45..49a9037 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3946,7 +3946,7 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work) } hw->mac.ops.setup_sfp(hw); - if (!adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK) + if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)) /* This will also work for DA Twinax connections */ schedule_work(&adapter->multispeed_fiber_task); adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK; -- cgit v0.10.2 From 79d381c9f2354b594dcab9b04dfcc0debf7294fe Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Thu, 16 Apr 2009 19:30:18 -0400 Subject: kernel/softirq.c: fix sparse warning Fix sparse warning in kernel/softirq.c. warning: do-while statement is not a compound statement Signed-off-by: H Hartley Sweeten LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/kernel/softirq.c b/kernel/softirq.c index 2fecefa..b525dd3 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -472,9 +472,9 @@ void tasklet_kill(struct tasklet_struct *t) printk("Attempt to kill tasklet from interrupt\n"); while (test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) { - do + do { yield(); - while (test_bit(TASKLET_STATE_SCHED, &t->state)); + } while (test_bit(TASKLET_STATE_SCHED, &t->state)); } tasklet_unlock_wait(t); clear_bit(TASKLET_STATE_SCHED, &t->state); -- cgit v0.10.2 From 788873ac70a5f2a5569ad41ef9753763ab270ddf Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 16 Apr 2009 09:38:45 +0000 Subject: MAINTAINERS - Add section NETWORKING DRIVERS Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index abedca5..1ed1fa1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3962,6 +3962,13 @@ F: net/wireless/ F: include/net/ieee80211* F: include/net/wireless.h +NETWORKING DRIVERS +L: netdev@vger.kernel.org +W: http://www.linuxfoundation.org/en/Net +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git +S: Odd Fixes +F: drivers/net/ + NETXEN (1/10) GbE SUPPORT P: Dhananjay Phadke M: dhananjay@netxen.com -- cgit v0.10.2 From b1e8fd54af73116331376a7b3074932a21e7477a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 16 Apr 2009 09:38:46 +0000 Subject: MAINTAINERS - Update NETWORKING W: url and standardize T: git url Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 1ed1fa1..36ea627 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3920,8 +3920,8 @@ NETWORKING [GENERAL] P: David S. Miller M: davem@davemloft.net L: netdev@vger.kernel.org -W: http://linux-net.osdl.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git +W: http://www.linuxfoundation.org/en/Net +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained F: net/ F: include/net/ -- cgit v0.10.2 From fe4e719d82c4052751d2287de4bd18bd04e93685 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Fri, 28 Nov 2008 02:46:48 +0900 Subject: m32r: move include/asm-m32r headers to arch/m32r/include/asm Signed-off-by: Hirokazu Takata diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild new file mode 100644 index 0000000..c68e168 --- /dev/null +++ b/arch/m32r/include/asm/Kbuild @@ -0,0 +1 @@ +include include/asm-generic/Kbuild.asm diff --git a/arch/m32r/include/asm/addrspace.h b/arch/m32r/include/asm/addrspace.h new file mode 100644 index 0000000..81782c1 --- /dev/null +++ b/arch/m32r/include/asm/addrspace.h @@ -0,0 +1,57 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 by Hiroyuki Kondo + * + * Defitions for the address spaces of the M32R CPUs. + */ +#ifndef __ASM_M32R_ADDRSPACE_H +#define __ASM_M32R_ADDRSPACE_H + +/* + * Memory segments (32bit kernel mode addresses) + */ +#define KUSEG 0x00000000 +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 +#define KSEG2 0xc0000000 +#define KSEG3 0xe0000000 + +#define K0BASE KSEG0 + +/* + * Returns the kernel segment base of a given address + */ +#ifndef __ASSEMBLY__ +#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000) +#else +#define KSEGX(a) ((a) & 0xe0000000) +#endif + +/* + * Returns the physical address of a KSEG0/KSEG1 address + */ +#ifndef __ASSEMBLY__ +#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) +#else +#define PHYSADDR(a) ((a) & 0x1fffffff) +#endif + +/* + * Map an address to a certain kernel segment + */ +#ifndef __ASSEMBLY__ +#define KSEG0ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG0)) +#define KSEG1ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG1)) +#define KSEG2ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG2)) +#define KSEG3ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG3)) +#else +#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0) +#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1) +#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2) +#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3) +#endif + +#endif /* __ASM_M32R_ADDRSPACE_H */ diff --git a/arch/m32r/include/asm/assembler.h b/arch/m32r/include/asm/assembler.h new file mode 100644 index 0000000..2635153 --- /dev/null +++ b/arch/m32r/include/asm/assembler.h @@ -0,0 +1,229 @@ +#ifndef _ASM_M32R_ASSEMBLER_H +#define _ASM_M32R_ASSEMBLER_H + +/* + * linux/asm-m32r/assembler.h + * + * Copyright (C) 2004 Hirokazu Takata + * + * This file contains M32R architecture specific macro definitions. + */ + + +#ifndef __STR +#ifdef __ASSEMBLY__ +#define __STR(x) x +#else +#define __STR(x) #x +#endif +#endif /* __STR */ + +#ifdef CONFIG_SMP +#define M32R_LOCK __STR(lock) +#define M32R_UNLOCK __STR(unlock) +#else +#define M32R_LOCK __STR(ld) +#define M32R_UNLOCK __STR(st) +#endif + +#ifdef __ASSEMBLY__ +#undef ENTRY +#define ENTRY(name) ENTRY_M name + .macro ENTRY_M name + .global \name + ALIGN +\name: + .endm +#endif + + +/** + * LDIMM - load immediate value + * STI - enable interruption + * CLI - disable interruption + */ + +#ifdef __ASSEMBLY__ + +#define LDIMM(reg,x) LDIMM reg x + .macro LDIMM reg x + seth \reg, #high(\x) + or3 \reg, \reg, #low(\x) + .endm + +#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) +#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg + .macro ENABLE_INTERRUPTS reg + setpsw #0x40 -> nop + ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1). + .endm + +#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg + .macro DISABLE_INTERRUPTS reg + clrpsw #0x40 -> nop + ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1). + .endm +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ +#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg + .macro ENABLE_INTERRUPTS reg + mvfc \reg, psw + or3 \reg, \reg, #0x0040 + mvtc \reg, psw + .endm + +#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg + .macro DISABLE_INTERRUPTS reg + mvfc \reg, psw + and3 \reg, \reg, #0xffbf + mvtc \reg, psw + .endm +#endif /* CONFIG_CHIP_M32102 */ + + .macro SAVE_ALL + push r0 ; orig_r0 + push sp ; spi (r15) + push lr ; r14 + push r13 + mvfc r13, cr3 ; spu + push r13 + mvfc r13, bbpc + push r13 + mvfc r13, bbpsw + push r13 + mvfc r13, bpc + push r13 + mvfc r13, psw + push r13 +#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) + mvfaclo r13, a1 + push r13 + mvfachi r13, a1 + push r13 + mvfaclo r13, a0 + push r13 + mvfachi r13, a0 + push r13 +#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) + mvfaclo r13 + push r13 + mvfachi r13 + push r13 + ldi r13, #0 + push r13 ; dummy push acc1h + push r13 ; dummy push acc1l +#else +#error unknown isa configuration +#endif + ldi r13, #-1 + push r13 ; syscall_nr (default: -1) + push r12 + push r11 + push r10 + push r9 + push r8 + push r7 + push r3 + push r2 + push r1 + push r0 + addi sp, #-4 ; room for implicit pt_regs parameter + push r6 + push r5 + push r4 + .endm + + .macro RESTORE_ALL + pop r4 + pop r5 + pop r6 + addi sp, #4 + pop r0 + pop r1 + pop r2 + pop r3 + pop r7 + pop r8 + pop r9 + pop r10 + pop r11 + pop r12 + addi r15, #4 ; Skip syscall number +#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) + pop r13 + mvtachi r13, a0 + pop r13 + mvtaclo r13, a0 + pop r13 + mvtachi r13, a1 + pop r13 + mvtaclo r13, a1 +#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) + pop r13 ; dummy pop acc1h + pop r13 ; dummy pop acc1l + pop r13 + mvtachi r13 + pop r13 + mvtaclo r13 +#else +#error unknown isa configuration +#endif + pop r14 + mvtc r14, psw + pop r14 + mvtc r14, bpc + addi sp, #8 ; Skip bbpsw, bbpc + pop r14 + mvtc r14, cr3 ; spu + pop r13 + pop lr ; r14 + pop sp ; spi (r15) + addi sp, #4 ; Skip orig_r0 + .fillinsn +1: rte + .section .fixup,"ax" +2: bl do_exit + .previous + .section __ex_table,"a" + ALIGN + .long 1b, 2b + .previous + .endm + +#define GET_CURRENT(reg) get_current reg + .macro get_current reg + ldi \reg, #-8192 + and \reg, sp + .endm + +#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) + .macro SWITCH_TO_KERNEL_STACK + ; switch to kernel stack (spi) + clrpsw #0x80 -> nop + .endm +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + .macro SWITCH_TO_KERNEL_STACK + push r0 ; save r0 for working + mvfc r0, psw + and3 r0, r0, #0x00ff7f + mvtc r0, psw + slli r0, #16 + bltz r0, 1f ; check BSM-bit +; + ;; called from kernel context: previous stack = spi + pop r0 ; retrieve r0 + bra 2f + .fillinsn +1: + ;; called from user context: previous stack = spu + mvfc r0, cr3 ; spu + addi r0, #4 + mvtc r0, cr3 ; spu + ld r0, @(-4,r0) ; retrieve r0 + .fillinsn +2: + .endm +#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_M32R_ASSEMBLER_H */ diff --git a/arch/m32r/include/asm/atomic.h b/arch/m32r/include/asm/atomic.h new file mode 100644 index 0000000..2eed30f --- /dev/null +++ b/arch/m32r/include/asm/atomic.h @@ -0,0 +1,318 @@ +#ifndef _ASM_M32R_ATOMIC_H +#define _ASM_M32R_ATOMIC_H + +/* + * linux/include/asm-m32r/atomic.h + * + * M32R version: + * Copyright (C) 2001, 2002 Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata + */ + +#include +#include +#include + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +#define ATOMIC_INIT(i) { (i) } + +/** + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. + */ +#define atomic_read(v) ((v)->counter) + +/** + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. + */ +#define atomic_set(v,i) (((v)->counter) = (i)) + +/** + * atomic_add_return - add integer to atomic variable and return it + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v and return (@i + @v). + */ +static __inline__ int atomic_add_return(int i, atomic_t *v) +{ + unsigned long flags; + int result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_add_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n\t" + "add %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (result) + : "r" (&v->counter), "r" (i) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * atomic_sub_return - subtract integer from atomic variable and return it + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and return (@v - @i). + */ +static __inline__ int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long flags; + int result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_sub_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n\t" + "sub %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (result) + : "r" (&v->counter), "r" (i) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * atomic_add - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v. + */ +#define atomic_add(i,v) ((void) atomic_add_return((i), (v))) + +/** + * atomic_sub - subtract the atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v. + */ +#define atomic_sub(i,v) ((void) atomic_sub_return((i), (v))) + +/** + * atomic_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns + * true if the result is zero, or false for all + * other cases. + */ +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) + +/** + * atomic_inc_return - increment atomic variable and return it + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 and returns the result. + */ +static __inline__ int atomic_inc_return(atomic_t *v) +{ + unsigned long flags; + int result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_inc_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n\t" + "addi %0, #1; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (result) + : "r" (&v->counter) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * atomic_dec_return - decrement atomic variable and return it + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1 and returns the result. + */ +static __inline__ int atomic_dec_return(atomic_t *v) +{ + unsigned long flags; + int result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_dec_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n\t" + "addi %0, #-1; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (result) + : "r" (&v->counter) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * atomic_inc - increment atomic variable + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1. + */ +#define atomic_inc(v) ((void)atomic_inc_return(v)) + +/** + * atomic_dec - decrement atomic variable + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1. + */ +#define atomic_dec(v) ((void)atomic_dec_return(v)) + +/** + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +/** + * atomic_dec_and_test - decrement and test + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1 and + * returns true if the result is 0, or false for all + * other cases. + */ +#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) + +/** + * atomic_add_negative - add and test if negative + * @v: pointer of type atomic_t + * @i: integer value to add + * + * Atomically adds @i to @v and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define atomic_add_negative(i,v) (atomic_add_return((i), (v)) < 0) + +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t *addr) +{ + unsigned long flags; + unsigned long tmp; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_clear_mask \n\t" + DCACHE_CLEAR("%0", "r5", "%1") + M32R_LOCK" %0, @%1; \n\t" + "and %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (addr), "r" (~mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r5" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +static __inline__ void atomic_set_mask(unsigned long mask, atomic_t *addr) +{ + unsigned long flags; + unsigned long tmp; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# atomic_set_mask \n\t" + DCACHE_CLEAR("%0", "r5", "%1") + M32R_LOCK" %0, @%1; \n\t" + "or %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (addr), "r" (mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r5" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +/* Atomic operations are already serializing on m32r */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include +#endif /* _ASM_M32R_ATOMIC_H */ diff --git a/arch/m32r/include/asm/auxvec.h b/arch/m32r/include/asm/auxvec.h new file mode 100644 index 0000000..f76dcc8 --- /dev/null +++ b/arch/m32r/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef _ASM_M32R__AUXVEC_H +#define _ASM_M32R__AUXVEC_H + +#endif /* _ASM_M32R__AUXVEC_H */ diff --git a/arch/m32r/include/asm/bitops.h b/arch/m32r/include/asm/bitops.h new file mode 100644 index 0000000..aaddf0d --- /dev/null +++ b/arch/m32r/include/asm/bitops.h @@ -0,0 +1,275 @@ +#ifndef _ASM_M32R_BITOPS_H +#define _ASM_M32R_BITOPS_H + +/* + * linux/include/asm-m32r/bitops.h + * + * Copyright 1992, Linus Torvalds. + * + * M32R version: + * Copyright (C) 2001, 2002 Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata + */ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include +#include +#include +#include + +/* + * These have to be done with inline assembly: that way the bit-setting + * is guaranteed to be atomic. All bit operations return 0 if the bit + * was cleared before the operation and != 0 if it was not. + * + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ + +/** + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void set_bit(int nr, volatile void * addr) +{ + __u32 mask; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r6", "%1") + M32R_LOCK" %0, @%1; \n\t" + "or %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (a), "r" (mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +/** + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static __inline__ void clear_bit(int nr, volatile void * addr) +{ + __u32 mask; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r6", "%1") + M32R_LOCK" %0, @%1; \n\t" + "and %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (a), "r" (~mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/** + * change_bit - Toggle a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void change_bit(int nr, volatile void * addr) +{ + __u32 mask; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r6", "%1") + M32R_LOCK" %0, @%1; \n\t" + "xor %0, %2; \n\t" + M32R_UNLOCK" %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (a), "r" (mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +/** + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_set_bit(int nr, volatile void * addr) +{ + __u32 mask, oldbit; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "%1", "%2") + M32R_LOCK" %0, @%2; \n\t" + "mv %1, %0; \n\t" + "and %0, %3; \n\t" + "or %1, %3; \n\t" + M32R_UNLOCK" %1, @%2; \n\t" + : "=&r" (oldbit), "=&r" (tmp) + : "r" (a), "r" (mask) + : "memory" + ); + local_irq_restore(flags); + + return (oldbit != 0); +} + +/** + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_clear_bit(int nr, volatile void * addr) +{ + __u32 mask, oldbit; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "%1", "%3") + M32R_LOCK" %0, @%3; \n\t" + "mv %1, %0; \n\t" + "and %0, %2; \n\t" + "not %2, %2; \n\t" + "and %1, %2; \n\t" + M32R_UNLOCK" %1, @%3; \n\t" + : "=&r" (oldbit), "=&r" (tmp), "+r" (mask) + : "r" (a) + : "memory" + ); + local_irq_restore(flags); + + return (oldbit != 0); +} + +/** + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_change_bit(int nr, volatile void * addr) +{ + __u32 mask, oldbit; + volatile __u32 *a = addr; + unsigned long flags; + unsigned long tmp; + + a += (nr >> 5); + mask = (1 << (nr & 0x1F)); + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "%1", "%2") + M32R_LOCK" %0, @%2; \n\t" + "mv %1, %0; \n\t" + "and %0, %3; \n\t" + "xor %1, %3; \n\t" + M32R_UNLOCK" %1, @%2; \n\t" + : "=&r" (oldbit), "=&r" (tmp) + : "r" (a), "r" (mask) + : "memory" + ); + local_irq_restore(flags); + + return (oldbit != 0); +} + +#include +#include +#include +#include +#include +#include + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +#endif /* __KERNEL__ */ + +#ifdef __KERNEL__ + +#include +#include +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_BITOPS_H */ diff --git a/arch/m32r/include/asm/bug.h b/arch/m32r/include/asm/bug.h new file mode 100644 index 0000000..4cc0462 --- /dev/null +++ b/arch/m32r/include/asm/bug.h @@ -0,0 +1,4 @@ +#ifndef _M32R_BUG_H +#define _M32R_BUG_H +#include +#endif diff --git a/arch/m32r/include/asm/bugs.h b/arch/m32r/include/asm/bugs.h new file mode 100644 index 0000000..f77214e --- /dev/null +++ b/arch/m32r/include/asm/bugs.h @@ -0,0 +1,19 @@ +#ifndef _ASM_M32R_BUGS_H +#define _ASM_M32R_BUGS_H + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ +#include + +static void __init check_bugs(void) +{ + extern unsigned long loops_per_jiffy; + + current_cpu_data.loops_per_jiffy = loops_per_jiffy; +} + +#endif /* _ASM_M32R_BUGS_H */ diff --git a/arch/m32r/include/asm/byteorder.h b/arch/m32r/include/asm/byteorder.h new file mode 100644 index 0000000..21855d8 --- /dev/null +++ b/arch/m32r/include/asm/byteorder.h @@ -0,0 +1,10 @@ +#ifndef _ASM_M32R_BYTEORDER_H +#define _ASM_M32R_BYTEORDER_H + +#if defined(__LITTLE_ENDIAN__) +# include +#else +# include +#endif + +#endif /* _ASM_M32R_BYTEORDER_H */ diff --git a/arch/m32r/include/asm/cache.h b/arch/m32r/include/asm/cache.h new file mode 100644 index 0000000..40b3ee9 --- /dev/null +++ b/arch/m32r/include/asm/cache.h @@ -0,0 +1,8 @@ +#ifndef _ASM_M32R_CACHE_H +#define _ASM_M32R_CACHE_H + +/* L1 cache line size */ +#define L1_CACHE_SHIFT 4 +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#endif /* _ASM_M32R_CACHE_H */ diff --git a/arch/m32r/include/asm/cachectl.h b/arch/m32r/include/asm/cachectl.h new file mode 100644 index 0000000..2aab8f6 --- /dev/null +++ b/arch/m32r/include/asm/cachectl.h @@ -0,0 +1,26 @@ +/* + * cachectl.h -- defines for M32R cache control system calls + * + * Copyright (C) 2003 by Kazuhiro Inaoka + */ +#ifndef __ASM_M32R_CACHECTL +#define __ASM_M32R_CACHECTL + +/* + * Options for cacheflush system call + * + * cacheflush() is currently fluch_cache_all(). + */ +#define ICACHE (1<<0) /* flush instruction cache */ +#define DCACHE (1<<1) /* writeback and flush data cache */ +#define BCACHE (ICACHE|DCACHE) /* flush both caches */ + +/* + * Caching modes for the cachectl(2) call + * + * cachectl(2) is currently not supported and returns ENOSYS. + */ +#define CACHEABLE 0 /* make pages cacheable */ +#define UNCACHEABLE 1 /* make pages uncacheable */ + +#endif /* __ASM_M32R_CACHECTL */ diff --git a/arch/m32r/include/asm/cacheflush.h b/arch/m32r/include/asm/cacheflush.h new file mode 100644 index 0000000..78587c9 --- /dev/null +++ b/arch/m32r/include/asm/cacheflush.h @@ -0,0 +1,69 @@ +#ifndef _ASM_M32R_CACHEFLUSH_H +#define _ASM_M32R_CACHEFLUSH_H + +#include + +extern void _flush_cache_all(void); +extern void _flush_cache_copyback_all(void); + +#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104) +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#ifndef CONFIG_SMP +#define flush_icache_range(start, end) _flush_cache_copyback_all() +#define flush_icache_page(vma,pg) _flush_cache_copyback_all() +#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_copyback_all() +#define flush_cache_sigtramp(addr) _flush_cache_copyback_all() +#else /* CONFIG_SMP */ +extern void smp_flush_cache_all(void); +#define flush_icache_range(start, end) smp_flush_cache_all() +#define flush_icache_page(vma,pg) smp_flush_cache_all() +#define flush_icache_user_range(vma,pg,adr,len) smp_flush_cache_all() +#define flush_cache_sigtramp(addr) _flush_cache_copyback_all() +#endif /* CONFIG_SMP */ +#elif defined(CONFIG_CHIP_M32102) +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) _flush_cache_all() +#define flush_icache_page(vma,pg) _flush_cache_all() +#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_all() +#define flush_cache_sigtramp(addr) _flush_cache_all() +#else +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(addr) do { } while (0) +#endif /* CONFIG_CHIP_* */ + +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { \ + memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ +} while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +#endif /* _ASM_M32R_CACHEFLUSH_H */ diff --git a/arch/m32r/include/asm/checksum.h b/arch/m32r/include/asm/checksum.h new file mode 100644 index 0000000..a7a7c4f --- /dev/null +++ b/arch/m32r/include/asm/checksum.h @@ -0,0 +1,204 @@ +#ifdef __KERNEL__ +#ifndef _ASM_M32R_CHECKSUM_H +#define _ASM_M32R_CHECKSUM_H + +/* + * include/asm-m32r/checksum.h + * + * IP/TCP/UDP checksum routines + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Some code taken from mips and parisc architecture. + * + * Copyright (C) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata + * Copyright (C) 2004 Hirokazu Takata + */ + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * The same as csum_partial, but copies from src while it checksums. + * + * Here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + +/* + * This is a new version of the above that records errors it finds in *errp, + * but continues and zeros thre rest of the buffer. + */ +extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, + int *err_ptr); + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned long tmpreg; + __asm__( + " sll3 %1, %0, #16 \n" + " cmp %0, %0 \n" + " addx %0, %1 \n" + " ldi %1, #0 \n" + " srli %0, #16 \n" + " addx %0, %1 \n" + " xor3 %0, %0, #0x0000ffff \n" + : "=r" (sum), "=&r" (tmpreg) + : "0" (sum) + : "cbit" + ); + return (__force __sum16)sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned long tmpreg0, tmpreg1; + __wsum sum; + + __asm__ __volatile__( + " ld %0, @%1+ \n" + " addi %2, #-4 \n" + "# bgez %2, 2f \n" + " cmp %0, %0 \n" + " ld %3, @%1+ \n" + " ld %4, @%1+ \n" + " addx %0, %3 \n" + " ld %3, @%1+ \n" + " addx %0, %4 \n" + " addx %0, %3 \n" + " .fillinsn\n" + "1: \n" + " ld %4, @%1+ \n" + " addi %2, #-1 \n" + " addx %0, %4 \n" + " bgtz %2, 1b \n" + "\n" + " ldi %3, #0 \n" + " addx %0, %3 \n" + " .fillinsn\n" + "2: \n" + /* Since the input registers which are loaded with iph and ihl + are modified, we must also specify them as outputs, or gcc + will assume they contain their original values. */ + : "=&r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmpreg0), "=&r" (tmpreg1) + : "1" (iph), "2" (ihl) + : "cbit", "memory"); + + return csum_fold(sum); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ +#if defined(__LITTLE_ENDIAN) + unsigned long len_proto = (proto + len) << 8; +#else + unsigned long len_proto = proto + len; +#endif + unsigned long tmpreg; + + __asm__( + " cmp %0, %0 \n" + " addx %0, %2 \n" + " addx %0, %3 \n" + " addx %0, %4 \n" + " ldi %1, #0 \n" + " addx %0, %1 \n" + : "=r" (sum), "=&r" (tmpreg) + : "r" (daddr), "r" (saddr), "r" (len_proto), "0" (sum) + : "cbit" + ); + + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold (csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + unsigned long tmpreg0, tmpreg1, tmpreg2, tmpreg3; + __asm__( + " ld %1, @(%5) \n" + " ld %2, @(4,%5) \n" + " ld %3, @(8,%5) \n" + " ld %4, @(12,%5) \n" + " add %0, %1 \n" + " addx %0, %2 \n" + " addx %0, %3 \n" + " addx %0, %4 \n" + " ld %1, @(%6) \n" + " ld %2, @(4,%6) \n" + " ld %3, @(8,%6) \n" + " ld %4, @(12,%6) \n" + " addx %0, %1 \n" + " addx %0, %2 \n" + " addx %0, %3 \n" + " addx %0, %4 \n" + " addx %0, %7 \n" + " addx %0, %8 \n" + " ldi %1, #0 \n" + " addx %0, %1 \n" + : "=&r" (sum), "=&r" (tmpreg0), "=&r" (tmpreg1), + "=&r" (tmpreg2), "=&r" (tmpreg3) + : "r" (saddr), "r" (daddr), + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "cbit" + ); + + return csum_fold(sum); +} + +#endif /* _ASM_M32R_CHECKSUM_H */ +#endif /* __KERNEL__ */ diff --git a/arch/m32r/include/asm/cputime.h b/arch/m32r/include/asm/cputime.h new file mode 100644 index 0000000..0a47550 --- /dev/null +++ b/arch/m32r/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __M32R_CPUTIME_H +#define __M32R_CPUTIME_H + +#include + +#endif /* __M32R_CPUTIME_H */ diff --git a/arch/m32r/include/asm/current.h b/arch/m32r/include/asm/current.h new file mode 100644 index 0000000..7859d86 --- /dev/null +++ b/arch/m32r/include/asm/current.h @@ -0,0 +1,15 @@ +#ifndef _ASM_M32R_CURRENT_H +#define _ASM_M32R_CURRENT_H + +#include + +struct task_struct; + +static __inline__ struct task_struct *get_current(void) +{ + return current_thread_info()->task; +} + +#define current (get_current()) + +#endif /* _ASM_M32R_CURRENT_H */ diff --git a/arch/m32r/include/asm/delay.h b/arch/m32r/include/asm/delay.h new file mode 100644 index 0000000..9dd9e99 --- /dev/null +++ b/arch/m32r/include/asm/delay.h @@ -0,0 +1,26 @@ +#ifndef _ASM_M32R_DELAY_H +#define _ASM_M32R_DELAY_H + +/* + * Copyright (C) 1993 Linus Torvalds + * + * Delay routines calling functions in arch/m32r/lib/delay.c + */ + +extern void __bad_udelay(void); +extern void __bad_ndelay(void); + +extern void __udelay(unsigned long usecs); +extern void __ndelay(unsigned long nsecs); +extern void __const_udelay(unsigned long xloops); +extern void __delay(unsigned long loops); + +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \ + __udelay(n)) + +#define ndelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ + __ndelay(n)) + +#endif /* _ASM_M32R_DELAY_H */ diff --git a/arch/m32r/include/asm/device.h b/arch/m32r/include/asm/device.h new file mode 100644 index 0000000..d8f9872 --- /dev/null +++ b/arch/m32r/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + diff --git a/arch/m32r/include/asm/div64.h b/arch/m32r/include/asm/div64.h new file mode 100644 index 0000000..6cd978c --- /dev/null +++ b/arch/m32r/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/m32r/include/asm/dma.h b/arch/m32r/include/asm/dma.h new file mode 100644 index 0000000..52f6a22 --- /dev/null +++ b/arch/m32r/include/asm/dma.h @@ -0,0 +1,12 @@ +#ifndef _ASM_M32R_DMA_H +#define _ASM_M32R_DMA_H + +#include + +/* + * The maximum address that we can perform a DMA transfer + * to on this platform + */ +#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x20000000) + +#endif /* _ASM_M32R_DMA_H */ diff --git a/arch/m32r/include/asm/elf.h b/arch/m32r/include/asm/elf.h new file mode 100644 index 0000000..0cc34c9 --- /dev/null +++ b/arch/m32r/include/asm/elf.h @@ -0,0 +1,134 @@ +#ifndef _ASM_M32R__ELF_H +#define _ASM_M32R__ELF_H + +/* + * ELF-specific definitions. + * + * Copyright (C) 1999-2004, Renesas Technology Corp. + * Hirokazu Takata + */ + +#include +#include +#include + +/* M32R relocation types */ +#define R_M32R_NONE 0 +#define R_M32R_16 1 +#define R_M32R_32 2 +#define R_M32R_24 3 +#define R_M32R_10_PCREL 4 +#define R_M32R_18_PCREL 5 +#define R_M32R_26_PCREL 6 +#define R_M32R_HI16_ULO 7 +#define R_M32R_HI16_SLO 8 +#define R_M32R_LO16 9 +#define R_M32R_SDA16 10 +#define R_M32R_GNU_VTINHERIT 11 +#define R_M32R_GNU_VTENTRY 12 + +#define R_M32R_16_RELA 33 +#define R_M32R_32_RELA 34 +#define R_M32R_24_RELA 35 +#define R_M32R_10_PCREL_RELA 36 +#define R_M32R_18_PCREL_RELA 37 +#define R_M32R_26_PCREL_RELA 38 +#define R_M32R_HI16_ULO_RELA 39 +#define R_M32R_HI16_SLO_RELA 40 +#define R_M32R_LO16_RELA 41 +#define R_M32R_SDA16_RELA 42 +#define R_M32R_RELA_GNU_VTINHERIT 43 +#define R_M32R_RELA_GNU_VTENTRY 44 + +#define R_M32R_GOT24 48 +#define R_M32R_26_PLTREL 49 +#define R_M32R_COPY 50 +#define R_M32R_GLOB_DAT 51 +#define R_M32R_JMP_SLOT 52 +#define R_M32R_RELATIVE 53 +#define R_M32R_GOTOFF 54 +#define R_M32R_GOTPC24 55 +#define R_M32R_GOT16_HI_ULO 56 +#define R_M32R_GOT16_HI_SLO 57 +#define R_M32R_GOT16_LO 58 +#define R_M32R_GOTPC_HI_ULO 59 +#define R_M32R_GOTPC_HI_SLO 60 +#define R_M32R_GOTPC_LO 61 +#define R_M32R_GOTOFF_HI_ULO 62 +#define R_M32R_GOTOFF_HI_SLO 63 +#define R_M32R_GOTOFF_LO 64 + +#define R_M32R_NUM 256 + +/* + * ELF register definitions.. + */ +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) + +typedef unsigned long elf_greg_t; +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +/* We have no FP mumumu. */ +typedef double elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) \ + (((x)->e_machine == EM_M32R) || ((x)->e_machine == EM_CYGNUS_M32R)) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#if defined(__LITTLE_ENDIAN) +#define ELF_DATA ELFDATA2LSB +#elif defined(__BIG_ENDIAN) +#define ELF_DATA ELFDATA2MSB +#else +#error no endian defined +#endif +#define ELF_ARCH EM_M32R + +/* r0 is set by ld.so to a pointer to a function which might be + * registered using 'atexit'. This provides a mean for the dynamic + * linker to call DT_FINI functions for shared libraries that have + * been loaded before the code runs. + * + * So that we can use the same startup file with static executables, + * we start programs with a value of 0 to indicate that there is no + * such function. + */ +#define ELF_PLAT_INIT(_r, load_addr) (_r)->r0 = 0 + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* + * This is the location that an ET_DYN program is loaded if exec'ed. + * Typical use of this is to invoke "./ld.so someprog" to test out a + * new version of the loader. We need to make sure that it is out of + * the way of the program that it will "exec", and that there is + * sufficient room for the brk. + */ +#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) + +/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is + now struct_user_regs, they are different) */ + +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + memcpy((char *)pr_reg, (char *)regs, sizeof (struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. */ +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) + +#endif /* _ASM_M32R__ELF_H */ diff --git a/arch/m32r/include/asm/emergency-restart.h b/arch/m32r/include/asm/emergency-restart.h new file mode 100644 index 0000000..108d8c4 --- /dev/null +++ b/arch/m32r/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m32r/include/asm/errno.h b/arch/m32r/include/asm/errno.h new file mode 100644 index 0000000..7771492 --- /dev/null +++ b/arch/m32r/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_ERRNO_H +#define _ASM_M32R_ERRNO_H + +#include + +#endif /* _ASM_M32R_ERRNO_H */ diff --git a/arch/m32r/include/asm/fb.h b/arch/m32r/include/asm/fb.h new file mode 100644 index 0000000..d92e99c --- /dev/null +++ b/arch/m32r/include/asm/fb.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/m32r/include/asm/fcntl.h b/arch/m32r/include/asm/fcntl.h new file mode 100644 index 0000000..46ab12d --- /dev/null +++ b/arch/m32r/include/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/m32r/include/asm/flat.h b/arch/m32r/include/asm/flat.h new file mode 100644 index 0000000..d851cf0 --- /dev/null +++ b/arch/m32r/include/asm/flat.h @@ -0,0 +1,146 @@ +/* + * include/asm-m32r/flat.h + * + * uClinux flat-format executables + * + * Copyright (C) 2004 Kazuhiro Inaoka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + */ +#ifndef __ASM_M32R_FLAT_H +#define __ASM_M32R_FLAT_H + +#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0)) +#define flat_argvp_envp_on_stack() 0 +#define flat_old_ram_flag(flags) (flags) +#define flat_set_persistent(relval, p) 0 +#define flat_reloc_valid(reloc, size) \ + (((reloc) - textlen_for_m32r_lo16_data) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) \ + m32r_flat_get_addr_from_rp(rp, relval, (text_len) ) + +#define flat_put_addr_at_rp(rp, addr, relval) \ + m32r_flat_put_addr_at_rp(rp, addr, relval) + +/* Convert a relocation entry into an address. */ +static inline unsigned long +flat_get_relocate_addr (unsigned long relval) +{ + return relval & 0x00ffffff; /* Mask out top 8-bits */ +} + +#define flat_m32r_get_reloc_type(relval) ((relval) >> 24) + +#define M32R_SETH_OPCODE 0xd0c00000 /* SETH instruction code */ + +#define FLAT_M32R_32 0x00 /* 32bits reloc */ +#define FLAT_M32R_24 0x01 /* unsigned 24bits reloc */ +#define FLAT_M32R_16 0x02 /* 16bits reloc */ +#define FLAT_M32R_LO16 0x03 /* signed low 16bits reloc (low()) */ +#define FLAT_M32R_LO16_DATA 0x04 /* signed low 16bits reloc (low()) + for a symbol in .data section */ + /* High 16bits of an address used + when the lower 16bbits are treated + as unsigned. + To create SETH instruction only. + 0x1X: X means a number of register. + 0x10 - 0x3F are reserved. */ +#define FLAT_M32R_HI16_ULO 0x10 /* reloc for SETH Rn,#high(imm16) */ + /* High 16bits of an address used + when the lower 16bbits are treated + as signed. + To create SETH instruction only. + 0x2X: X means a number of register. + 0x20 - 0x4F are reserved. */ +#define FLAT_M32R_HI16_SLO 0x20 /* reloc for SETH Rn,#shigh(imm16) */ + +static unsigned long textlen_for_m32r_lo16_data = 0; + +static inline unsigned long m32r_flat_get_addr_from_rp (unsigned long *rp, + unsigned long relval, + unsigned long textlen) +{ + unsigned int reloc = flat_m32r_get_reloc_type (relval); + textlen_for_m32r_lo16_data = 0; + if (reloc & 0xf0) { + unsigned long addr = htonl(*rp); + switch (reloc & 0xf0) + { + case FLAT_M32R_HI16_ULO: + case FLAT_M32R_HI16_SLO: + if (addr == 0) { + /* put "seth Rn,#0x0" instead of 0 (addr). */ + *rp = (M32R_SETH_OPCODE | ((reloc & 0x0f)<<24)); + } + return addr; + default: + break; + } + } else { + switch (reloc) + { + case FLAT_M32R_LO16: + return htonl(*rp) & 0xFFFF; + case FLAT_M32R_LO16_DATA: + /* FIXME: The return value will decrease by textlen + at m32r_flat_put_addr_at_rp () */ + textlen_for_m32r_lo16_data = textlen; + return (htonl(*rp) & 0xFFFF) + textlen; + case FLAT_M32R_16: + return htons(*(unsigned short *)rp) & 0xFFFF; + case FLAT_M32R_24: + return htonl(*rp) & 0xFFFFFF; + case FLAT_M32R_32: + return htonl(*rp); + default: + break; + } + } + return ~0; /* bogus value */ +} + +static inline void m32r_flat_put_addr_at_rp (unsigned long *rp, + unsigned long addr, + unsigned long relval) +{ + unsigned int reloc = flat_m32r_get_reloc_type (relval); + if (reloc & 0xf0) { + unsigned long Rn = reloc & 0x0f; /* get a number of register */ + Rn <<= 24; /* 0x0R000000 */ + reloc &= 0xf0; + switch (reloc) + { + case FLAT_M32R_HI16_ULO: /* To create SETH Rn,#high(imm16) */ + *rp = (M32R_SETH_OPCODE | Rn + | ((addr >> 16) & 0xFFFF)); + break; + case FLAT_M32R_HI16_SLO: /* To create SETH Rn,#shigh(imm16) */ + *rp = (M32R_SETH_OPCODE | Rn + | (((addr >> 16) + ((addr & 0x8000) ? 1 : 0)) + & 0xFFFF)); + break; + } + } else { + switch (reloc) { + case FLAT_M32R_LO16_DATA: + addr -= textlen_for_m32r_lo16_data; + textlen_for_m32r_lo16_data = 0; + case FLAT_M32R_LO16: + *rp = (htonl(*rp) & 0xFFFF0000) | (addr & 0xFFFF); + break; + case FLAT_M32R_16: + *(unsigned short *)rp = addr & 0xFFFF; + break; + case FLAT_M32R_24: + *rp = (htonl(*rp) & 0xFF000000) | (addr & 0xFFFFFF); + break; + case FLAT_M32R_32: + *rp = addr; + break; + } + } +} + +#endif /* __ASM_M32R_FLAT_H */ diff --git a/arch/m32r/include/asm/futex.h b/arch/m32r/include/asm/futex.h new file mode 100644 index 0000000..6a332a9 --- /dev/null +++ b/arch/m32r/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include + +#endif diff --git a/arch/m32r/include/asm/hardirq.h b/arch/m32r/include/asm/hardirq.h new file mode 100644 index 0000000..cb8aa76 --- /dev/null +++ b/arch/m32r/include/asm/hardirq.h @@ -0,0 +1,36 @@ +#ifdef __KERNEL__ +#ifndef __ASM_HARDIRQ_H +#define __ASM_HARDIRQ_H + +#include +#include + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#if NR_IRQS > 256 +#define HARDIRQ_BITS 9 +#else +#define HARDIRQ_BITS 8 +#endif + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +static inline void ack_bad_irq(int irq) +{ + printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq); + BUG(); +} + +#endif /* __ASM_HARDIRQ_H */ +#endif /* __KERNEL__ */ diff --git a/arch/m32r/include/asm/hw_irq.h b/arch/m32r/include/asm/hw_irq.h new file mode 100644 index 0000000..7138537 --- /dev/null +++ b/arch/m32r/include/asm/hw_irq.h @@ -0,0 +1,4 @@ +#ifndef _ASM_M32R_HW_IRQ_H +#define _ASM_M32R_HW_IRQ_H + +#endif /* _ASM_M32R_HW_IRQ_H */ diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h new file mode 100644 index 0000000..d06933b --- /dev/null +++ b/arch/m32r/include/asm/io.h @@ -0,0 +1,200 @@ +#ifndef _ASM_M32R_IO_H +#define _ASM_M32R_IO_H + +#include +#include +#include /* __va */ + +#ifdef __KERNEL__ + +#define IO_SPACE_LIMIT 0xFFFFFFFF + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline unsigned long virt_to_phys(volatile void * address) +{ + return __pa(address); +} + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline void *phys_to_virt(unsigned long address) +{ + return __va(address); +} + +extern void __iomem * +__ioremap(unsigned long offset, unsigned long size, unsigned long flags); + +/** + * ioremap - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + */ + +static inline void __iomem *ioremap(unsigned long offset, unsigned long size) +{ + return __ioremap(offset, size, 0); +} + +extern void iounmap(volatile void __iomem *addr); +#define ioremap_nocache(off,size) ioremap(off,size) + +/* + * IO bus memory addresses are also 1:1 with the physical address + */ +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) +#define page_to_bus page_to_phys +#define virt_to_bus virt_to_phys + +extern unsigned char _inb(unsigned long); +extern unsigned short _inw(unsigned long); +extern unsigned long _inl(unsigned long); +extern unsigned char _inb_p(unsigned long); +extern unsigned short _inw_p(unsigned long); +extern unsigned long _inl_p(unsigned long); +extern void _outb(unsigned char, unsigned long); +extern void _outw(unsigned short, unsigned long); +extern void _outl(unsigned long, unsigned long); +extern void _outb_p(unsigned char, unsigned long); +extern void _outw_p(unsigned short, unsigned long); +extern void _outl_p(unsigned long, unsigned long); +extern void _insb(unsigned int, void *, unsigned long); +extern void _insw(unsigned int, void *, unsigned long); +extern void _insl(unsigned int, void *, unsigned long); +extern void _outsb(unsigned int, const void *, unsigned long); +extern void _outsw(unsigned int, const void *, unsigned long); +extern void _outsl(unsigned int, const void *, unsigned long); + +static inline unsigned char _readb(unsigned long addr) +{ + return *(volatile unsigned char __force *)addr; +} + +static inline unsigned short _readw(unsigned long addr) +{ + return *(volatile unsigned short __force *)addr; +} + +static inline unsigned long _readl(unsigned long addr) +{ + return *(volatile unsigned long __force *)addr; +} + +static inline void _writeb(unsigned char b, unsigned long addr) +{ + *(volatile unsigned char __force *)addr = b; +} + +static inline void _writew(unsigned short w, unsigned long addr) +{ + *(volatile unsigned short __force *)addr = w; +} + +static inline void _writel(unsigned long l, unsigned long addr) +{ + *(volatile unsigned long __force *)addr = l; +} + +#define inb _inb +#define inw _inw +#define inl _inl +#define outb _outb +#define outw _outw +#define outl _outl + +#define inb_p _inb_p +#define inw_p _inw_p +#define inl_p _inl_p +#define outb_p _outb_p +#define outw_p _outw_p +#define outl_p _outl_p + +#define insb _insb +#define insw _insw +#define insl _insl +#define outsb _outsb +#define outsw _outsw +#define outsl _outsl + +#define readb(addr) _readb((unsigned long)(addr)) +#define readw(addr) _readw((unsigned long)(addr)) +#define readl(addr) _readl((unsigned long)(addr)) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl + +#define writeb(val, addr) _writeb((val), (unsigned long)(addr)) +#define writew(val, addr) _writew((val), (unsigned long)(addr)) +#define writel(val, addr) _writel((val), (unsigned long)(addr)) +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +#define mmiowb() + +#define flush_write_buffers() do { } while (0) /* M32R_FIXME */ + +static inline void +memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} + +static inline void +memcpy_fromio(void *dst, volatile void __iomem *src, int count) +{ + memcpy(dst, (void __force *) src, count); +} + +static inline void +memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + memcpy((void __force *) dst, src, count); +} + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_IO_H */ diff --git a/arch/m32r/include/asm/ioctl.h b/arch/m32r/include/asm/ioctl.h new file mode 100644 index 0000000..b279fe0 --- /dev/null +++ b/arch/m32r/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/m32r/include/asm/ioctls.h b/arch/m32r/include/asm/ioctls.h new file mode 100644 index 0000000..b9f54bb --- /dev/null +++ b/arch/m32r/include/asm/ioctls.h @@ -0,0 +1,87 @@ +#ifndef __ARCH_M32R_IOCTLS_H__ +#define __ARCH_M32R_IOCTLS_H__ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ +#define FIOQSIZE 0x5460 + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __ARCH_M32R_IOCTLS_H__ */ diff --git a/arch/m32r/include/asm/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h new file mode 100644 index 0000000..8d2d7c8 --- /dev/null +++ b/arch/m32r/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef _ASM_M32R_IPCBUF_H +#define _ASM_M32R_IPCBUF_H + +/* + * The ipc64_perm structure for m32r architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_M32R_IPCBUF_H */ diff --git a/arch/m32r/include/asm/irq.h b/arch/m32r/include/asm/irq.h new file mode 100644 index 0000000..242028b --- /dev/null +++ b/arch/m32r/include/asm/irq.h @@ -0,0 +1,90 @@ +#ifdef __KERNEL__ +#ifndef _ASM_M32R_IRQ_H +#define _ASM_M32R_IRQ_H + + +#if defined(CONFIG_PLAT_USRV) +/* + * IRQ definitions for M32700UT + * M32700 Chip: 64 interrupts + * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin + */ +#define M32700UT_NUM_CPU_IRQ (64) +#define M32700UT_NUM_PLD_IRQ (32) +#define M32700UT_IRQ_BASE 0 +#define M32700UT_CPU_IRQ_BASE M32700UT_IRQ_BASE +#define M32700UT_PLD_IRQ_BASE (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ) + +#define NR_IRQS (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ) +#elif defined(CONFIG_PLAT_M32700UT) +/* + * IRQ definitions for M32700UT(Rev.C) + M32R-LAN + * M32700 Chip: 64 interrupts + * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin + * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin + * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin + */ +#define M32700UT_NUM_CPU_IRQ (64) +#define M32700UT_NUM_PLD_IRQ (32) +#define M32700UT_NUM_LCD_PLD_IRQ (32) +#define M32700UT_NUM_LAN_PLD_IRQ (32) +#define M32700UT_IRQ_BASE 0 +#define M32700UT_CPU_IRQ_BASE (M32700UT_IRQ_BASE) +#define M32700UT_PLD_IRQ_BASE \ + (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ) +#define M32700UT_LCD_PLD_IRQ_BASE \ + (M32700UT_PLD_IRQ_BASE + M32700UT_NUM_PLD_IRQ) +#define M32700UT_LAN_PLD_IRQ_BASE \ + (M32700UT_LCD_PLD_IRQ_BASE + M32700UT_NUM_LCD_PLD_IRQ) + +#define NR_IRQS \ + (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ \ + + M32700UT_NUM_LCD_PLD_IRQ + M32700UT_NUM_LAN_PLD_IRQ) +#elif defined(CONFIG_PLAT_OPSPUT) +/* + * IRQ definitions for OPSPUT + M32R-LAN + * OPSP Chip: 64 interrupts + * ICU of OPSPUT-on-board PLD: 32 interrupts cascaded to INT1# chip pin + * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin + * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin + */ +#define OPSPUT_NUM_CPU_IRQ (64) +#define OPSPUT_NUM_PLD_IRQ (32) +#define OPSPUT_NUM_LCD_PLD_IRQ (32) +#define OPSPUT_NUM_LAN_PLD_IRQ (32) +#define OPSPUT_IRQ_BASE 0 +#define OPSPUT_CPU_IRQ_BASE (OPSPUT_IRQ_BASE) +#define OPSPUT_PLD_IRQ_BASE \ + (OPSPUT_CPU_IRQ_BASE + OPSPUT_NUM_CPU_IRQ) +#define OPSPUT_LCD_PLD_IRQ_BASE \ + (OPSPUT_PLD_IRQ_BASE + OPSPUT_NUM_PLD_IRQ) +#define OPSPUT_LAN_PLD_IRQ_BASE \ + (OPSPUT_LCD_PLD_IRQ_BASE + OPSPUT_NUM_LCD_PLD_IRQ) + +#define NR_IRQS \ + (OPSPUT_NUM_CPU_IRQ + OPSPUT_NUM_PLD_IRQ \ + + OPSPUT_NUM_LCD_PLD_IRQ + OPSPUT_NUM_LAN_PLD_IRQ) + +#elif defined(CONFIG_PLAT_M32104UT) +/* + * IRQ definitions for M32104UT + * M32104 Chip: 64 interrupts + * ICU of M32104UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin + */ +#define M32104UT_NUM_CPU_IRQ (64) +#define M32104UT_NUM_PLD_IRQ (32) +#define M32104UT_IRQ_BASE 0 +#define M32104UT_CPU_IRQ_BASE M32104UT_IRQ_BASE +#define M32104UT_PLD_IRQ_BASE (M32104UT_CPU_IRQ_BASE + M32104UT_NUM_CPU_IRQ) + +#define NR_IRQS \ + (M32104UT_NUM_CPU_IRQ + M32104UT_NUM_PLD_IRQ) + +#else +#define NR_IRQS 64 +#endif + +#define irq_canonicalize(irq) (irq) + +#endif /* _ASM_M32R_IRQ_H */ +#endif /* __KERNEL__ */ diff --git a/arch/m32r/include/asm/irq_regs.h b/arch/m32r/include/asm/irq_regs.h new file mode 100644 index 0000000..3dd9c0b --- /dev/null +++ b/arch/m32r/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/m32r/include/asm/kdebug.h b/arch/m32r/include/asm/kdebug.h new file mode 100644 index 0000000..6ece1b0 --- /dev/null +++ b/arch/m32r/include/asm/kdebug.h @@ -0,0 +1 @@ +#include diff --git a/arch/m32r/include/asm/kmap_types.h b/arch/m32r/include/asm/kmap_types.h new file mode 100644 index 0000000..fa94dc6 --- /dev/null +++ b/arch/m32r/include/asm/kmap_types.h @@ -0,0 +1,29 @@ +#ifndef __M32R_KMAP_TYPES_H +#define __M32R_KMAP_TYPES_H + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif /* __M32R_KMAP_TYPES_H */ diff --git a/arch/m32r/include/asm/linkage.h b/arch/m32r/include/asm/linkage.h new file mode 100644 index 0000000..a9fb151 --- /dev/null +++ b/arch/m32r/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .balign 4 +#define __ALIGN_STR ".balign 4" + +#endif /* __ASM_LINKAGE_H */ diff --git a/arch/m32r/include/asm/local.h b/arch/m32r/include/asm/local.h new file mode 100644 index 0000000..22256d1 --- /dev/null +++ b/arch/m32r/include/asm/local.h @@ -0,0 +1,366 @@ +#ifndef __M32R_LOCAL_H +#define __M32R_LOCAL_H + +/* + * linux/include/asm-m32r/local.h + * + * M32R version: + * Copyright (C) 2001, 2002 Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata + * Copyright (C) 2007 Mathieu Desnoyers + */ + +#include +#include +#include +#include + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +/* + * Make sure gcc doesn't try to be clever and move things around + * on us. We need to use _exactly_ the address the user gave us, + * not some alias that contains the same information. + */ +typedef struct { volatile int counter; } local_t; + +#define LOCAL_INIT(i) { (i) } + +/** + * local_read - read local variable + * @l: pointer of type local_t + * + * Atomically reads the value of @l. + */ +#define local_read(l) ((l)->counter) + +/** + * local_set - set local variable + * @l: pointer of type local_t + * @i: required value + * + * Atomically sets the value of @l to @i. + */ +#define local_set(l, i) (((l)->counter) = (i)) + +/** + * local_add_return - add long to local variable and return it + * @i: long value to add + * @l: pointer of type local_t + * + * Atomically adds @i to @l and return (@i + @l). + */ +static inline long local_add_return(long i, local_t *l) +{ + unsigned long flags; + long result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_add_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n\t" + "add %0, %2; \n\t" + "st %0, @%1; \n\t" + : "=&r" (result) + : "r" (&l->counter), "r" (i) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * local_sub_return - subtract long from local variable and return it + * @i: long value to subtract + * @l: pointer of type local_t + * + * Atomically subtracts @i from @l and return (@l - @i). + */ +static inline long local_sub_return(long i, local_t *l) +{ + unsigned long flags; + long result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_sub_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n\t" + "sub %0, %2; \n\t" + "st %0, @%1; \n\t" + : "=&r" (result) + : "r" (&l->counter), "r" (i) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * local_add - add long to local variable + * @i: long value to add + * @l: pointer of type local_t + * + * Atomically adds @i to @l. + */ +#define local_add(i, l) ((void) local_add_return((i), (l))) + +/** + * local_sub - subtract the local variable + * @i: long value to subtract + * @l: pointer of type local_t + * + * Atomically subtracts @i from @l. + */ +#define local_sub(i, l) ((void) local_sub_return((i), (l))) + +/** + * local_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @l: pointer of type local_t + * + * Atomically subtracts @i from @l and returns + * true if the result is zero, or false for all + * other cases. + */ +#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0) + +/** + * local_inc_return - increment local variable and return it + * @l: pointer of type local_t + * + * Atomically increments @l by 1 and returns the result. + */ +static inline long local_inc_return(local_t *l) +{ + unsigned long flags; + long result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_inc_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n\t" + "addi %0, #1; \n\t" + "st %0, @%1; \n\t" + : "=&r" (result) + : "r" (&l->counter) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * local_dec_return - decrement local variable and return it + * @l: pointer of type local_t + * + * Atomically decrements @l by 1 and returns the result. + */ +static inline long local_dec_return(local_t *l) +{ + unsigned long flags; + long result; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_dec_return \n\t" + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n\t" + "addi %0, #-1; \n\t" + "st %0, @%1; \n\t" + : "=&r" (result) + : "r" (&l->counter) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return result; +} + +/** + * local_inc - increment local variable + * @l: pointer of type local_t + * + * Atomically increments @l by 1. + */ +#define local_inc(l) ((void)local_inc_return(l)) + +/** + * local_dec - decrement local variable + * @l: pointer of type local_t + * + * Atomically decrements @l by 1. + */ +#define local_dec(l) ((void)local_dec_return(l)) + +/** + * local_inc_and_test - increment and test + * @l: pointer of type local_t + * + * Atomically increments @l by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define local_inc_and_test(l) (local_inc_return(l) == 0) + +/** + * local_dec_and_test - decrement and test + * @l: pointer of type local_t + * + * Atomically decrements @l by 1 and + * returns true if the result is 0, or false for all + * other cases. + */ +#define local_dec_and_test(l) (local_dec_return(l) == 0) + +/** + * local_add_negative - add and test if negative + * @l: pointer of type local_t + * @i: integer value to add + * + * Atomically adds @i to @l and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define local_add_negative(i, l) (local_add_return((i), (l)) < 0) + +#define local_cmpxchg(l, o, n) (cmpxchg_local(&((l)->counter), (o), (n))) +#define local_xchg(v, new) (xchg_local(&((l)->counter), new)) + +/** + * local_add_unless - add unless the number is a given value + * @l: pointer of type local_t + * @a: the amount to add to l... + * @u: ...unless l is equal to u. + * + * Atomically adds @a to @l, so long as it was not @u. + * Returns non-zero if @l was not @u, and zero otherwise. + */ +static inline int local_add_unless(local_t *l, long a, long u) +{ + long c, old; + c = local_read(l); + for (;;) { + if (unlikely(c == (u))) + break; + old = local_cmpxchg((l), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define local_inc_not_zero(l) local_add_unless((l), 1, 0) + +static inline void local_clear_mask(unsigned long mask, local_t *addr) +{ + unsigned long flags; + unsigned long tmp; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_clear_mask \n\t" + DCACHE_CLEAR("%0", "r5", "%1") + "ld %0, @%1; \n\t" + "and %0, %2; \n\t" + "st %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (addr), "r" (~mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r5" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +static inline void local_set_mask(unsigned long mask, local_t *addr) +{ + unsigned long flags; + unsigned long tmp; + + local_irq_save(flags); + __asm__ __volatile__ ( + "# local_set_mask \n\t" + DCACHE_CLEAR("%0", "r5", "%1") + "ld %0, @%1; \n\t" + "or %0, %2; \n\t" + "st %0, @%1; \n\t" + : "=&r" (tmp) + : "r" (addr), "r" (mask) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r5" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); +} + +/* Atomic operations are already serializing on m32r */ +#define smp_mb__before_local_dec() barrier() +#define smp_mb__after_local_dec() barrier() +#define smp_mb__before_local_inc() barrier() +#define smp_mb__after_local_inc() barrier() + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ + +#define __local_inc(l) ((l)->a.counter++) +#define __local_dec(l) ((l)->a.counter++) +#define __local_add(i, l) ((l)->a.counter += (i)) +#define __local_sub(i, l) ((l)->a.counter -= (i)) + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ + +/* Need to disable preemption for the cpu local counters otherwise we could + still access a variable of a previous CPU in a non local way. */ +#define cpu_local_wrap_v(l) \ + ({ local_t res__; \ + preempt_disable(); \ + res__ = (l); \ + preempt_enable(); \ + res__; }) +#define cpu_local_wrap(l) \ + ({ preempt_disable(); \ + l; \ + preempt_enable(); }) \ + +#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) +#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) +#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) +#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) +#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) +#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) + +#define __cpu_local_inc(l) cpu_local_inc(l) +#define __cpu_local_dec(l) cpu_local_dec(l) +#define __cpu_local_add(i, l) cpu_local_add((i), (l)) +#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) + +#endif /* __M32R_LOCAL_H */ diff --git a/arch/m32r/include/asm/m32102.h b/arch/m32r/include/asm/m32102.h new file mode 100644 index 0000000..52807f8 --- /dev/null +++ b/arch/m32r/include/asm/m32102.h @@ -0,0 +1,314 @@ +#ifndef _M32102_H_ +#define _M32102_H_ + +/* + * Renesas M32R 32102 group + * + * Copyright (c) 2001 Hitoshi Yamamoto + * Copyright (c) 2003, 2004 Renesas Technology Corp. + */ + +/*======================================================================* + * Special Function Register + *======================================================================*/ +#if !defined(CONFIG_CHIP_M32104) +#define M32R_SFR_OFFSET (0x00E00000) /* 0x00E00000-0x00EFFFFF 1[MB] */ +#else +#define M32R_SFR_OFFSET (0x00700000) /* 0x00700000-0x007FFFFF 1[MB] */ +#endif + +/* + * Clock and Power Management registers. + */ +#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET) + +#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET) +#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET) +#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET) + +/* + * DMA Controller registers. + */ +#define M32R_DMA_OFFSET (0x000F8000+M32R_SFR_OFFSET) + +#define M32R_DMAEN_PORTL (0x000+M32R_DMA_OFFSET) +#define M32R_DMAISTS_PORTL (0x004+M32R_DMA_OFFSET) +#define M32R_DMAEDET_PORTL (0x008+M32R_DMA_OFFSET) +#define M32R_DMAASTS_PORTL (0x00c+M32R_DMA_OFFSET) + +#define M32R_DMA0CR0_PORTL (0x100+M32R_DMA_OFFSET) +#define M32R_DMA0CR1_PORTL (0x104+M32R_DMA_OFFSET) +#define M32R_DMA0CSA_PORTL (0x108+M32R_DMA_OFFSET) +#define M32R_DMA0RSA_PORTL (0x10c+M32R_DMA_OFFSET) +#define M32R_DMA0CDA_PORTL (0x110+M32R_DMA_OFFSET) +#define M32R_DMA0RDA_PORTL (0x114+M32R_DMA_OFFSET) +#define M32R_DMA0CBCUT_PORTL (0x118+M32R_DMA_OFFSET) +#define M32R_DMA0RBCUT_PORTL (0x11c+M32R_DMA_OFFSET) + +#define M32R_DMA1CR0_PORTL (0x200+M32R_DMA_OFFSET) +#define M32R_DMA1CR1_PORTL (0x204+M32R_DMA_OFFSET) +#define M32R_DMA1CSA_PORTL (0x208+M32R_DMA_OFFSET) +#define M32R_DMA1RSA_PORTL (0x20c+M32R_DMA_OFFSET) +#define M32R_DMA1CDA_PORTL (0x210+M32R_DMA_OFFSET) +#define M32R_DMA1RDA_PORTL (0x214+M32R_DMA_OFFSET) +#define M32R_DMA1CBCUT_PORTL (0x218+M32R_DMA_OFFSET) +#define M32R_DMA1RBCUT_PORTL (0x21c+M32R_DMA_OFFSET) + +/* + * Multi Function Timer registers. + */ +#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET) + +#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */ +#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */ + +#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET) +#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */ +#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */ +#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */ +#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */ +#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */ + +#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET) +#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */ +#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */ +#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */ +#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */ +#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */ + +#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET) +#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */ +#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */ +#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */ +#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */ +#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */ + +#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET) +#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */ +#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */ +#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */ +#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */ +#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */ + +#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET) +#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */ +#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */ +#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */ +#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */ +#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */ + +#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET) +#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */ +#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */ +#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */ +#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */ +#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */ + +#if (defined(CONFIG_CHIP_M32700) && !defined(CONFIG_PLAT_MAPPI2)) \ + || defined(CONFIG_CHIP_M32104) +#define M32R_MFTCR_MFT0MSK (1UL<<31) /* b0 */ +#define M32R_MFTCR_MFT1MSK (1UL<<30) /* b1 */ +#define M32R_MFTCR_MFT2MSK (1UL<<29) /* b2 */ +#define M32R_MFTCR_MFT3MSK (1UL<<28) /* b3 */ +#define M32R_MFTCR_MFT4MSK (1UL<<27) /* b4 */ +#define M32R_MFTCR_MFT5MSK (1UL<<26) /* b5 */ +#define M32R_MFTCR_MFT0EN (1UL<<23) /* b8 */ +#define M32R_MFTCR_MFT1EN (1UL<<22) /* b9 */ +#define M32R_MFTCR_MFT2EN (1UL<<21) /* b10 */ +#define M32R_MFTCR_MFT3EN (1UL<<20) /* b11 */ +#define M32R_MFTCR_MFT4EN (1UL<<19) /* b12 */ +#define M32R_MFTCR_MFT5EN (1UL<<18) /* b13 */ +#else +#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */ +#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */ +#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */ +#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */ +#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */ +#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */ +#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */ +#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */ +#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */ +#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */ +#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */ +#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */ +#endif + +#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */ +#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */ +#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */ +#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */ +#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */ +#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */ +#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */ +#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */ +#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */ +#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */ +#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */ +#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */ +#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */ +#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */ +#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */ + +/* + * Serial I/O registers. + */ +#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET) + +#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET) +#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET) +#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET) +#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET) +#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET) +#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET) +#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET) +#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET) +#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET) + +/* + * Interrupt Control Unit registers. + */ +#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET) +#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET) +#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET) +#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET) +#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET) +#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET) +#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */ +#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */ +#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */ +#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */ +#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */ +#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */ +#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */ +#define M32R_ICU_CR8_PORTL (0x219+M32R_ICU_OFFSET) /* INT7 */ +#define M32R_ICU_CR16_PORTL (0x23C+M32R_ICU_OFFSET) /* MFT0 */ +#define M32R_ICU_CR17_PORTL (0x240+M32R_ICU_OFFSET) /* MFT1 */ +#define M32R_ICU_CR18_PORTL (0x244+M32R_ICU_OFFSET) /* MFT2 */ +#define M32R_ICU_CR19_PORTL (0x248+M32R_ICU_OFFSET) /* MFT3 */ +#define M32R_ICU_CR20_PORTL (0x24C+M32R_ICU_OFFSET) /* MFT4 */ +#define M32R_ICU_CR21_PORTL (0x250+M32R_ICU_OFFSET) /* MFT5 */ +#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* DMA0 */ +#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* DMA1 */ +#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* SIO0 */ +#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* SIO0 */ +#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* SIO1 */ +#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* SIO1 */ +#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* SIO2 */ +#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* SIO2 */ +#define M32R_ICU_CR54_PORTL (0x2D4+M32R_ICU_OFFSET) /* SIO3 */ +#define M32R_ICU_CR55_PORTL (0x2D8+M32R_ICU_OFFSET) /* SIO3 */ +#define M32R_ICU_CR56_PORTL (0x2DC+M32R_ICU_OFFSET) /* SIO4 */ +#define M32R_ICU_CR57_PORTL (0x2E0+M32R_ICU_OFFSET) /* SIO4 */ + +#ifdef CONFIG_SMP +#define M32R_ICU_IPICR0_PORTL (0x2dc+M32R_ICU_OFFSET) /* IPI0 */ +#define M32R_ICU_IPICR1_PORTL (0x2e0+M32R_ICU_OFFSET) /* IPI1 */ +#define M32R_ICU_IPICR2_PORTL (0x2e4+M32R_ICU_OFFSET) /* IPI2 */ +#define M32R_ICU_IPICR3_PORTL (0x2e8+M32R_ICU_OFFSET) /* IPI3 */ +#define M32R_ICU_IPICR4_PORTL (0x2ec+M32R_ICU_OFFSET) /* IPI4 */ +#define M32R_ICU_IPICR5_PORTL (0x2f0+M32R_ICU_OFFSET) /* IPI5 */ +#define M32R_ICU_IPICR6_PORTL (0x2f4+M32R_ICU_OFFSET) /* IPI6 */ +#define M32R_ICU_IPICR7_PORTL (0x2f8+M32R_ICU_OFFSET) /* IPI7 */ +#endif /* CONFIG_SMP */ + +#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */ +#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */ +#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */ +#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */ +#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */ +#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */ +#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */ +#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */ + +#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */ +#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */ +#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */ +#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */ +#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/ +#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */ +#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */ +#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */ +#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */ +#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */ +#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */ +#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */ +#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */ +#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */ + +#define M32R_IRQ_INT0 (1) /* INT0 */ +#define M32R_IRQ_INT1 (2) /* INT1 */ +#define M32R_IRQ_INT2 (3) /* INT2 */ +#define M32R_IRQ_INT3 (4) /* INT3 */ +#define M32R_IRQ_INT4 (5) /* INT4 */ +#define M32R_IRQ_INT5 (6) /* INT5 */ +#define M32R_IRQ_INT6 (7) /* INT6 */ +#define M32R_IRQ_MFT0 (16) /* MFT0 */ +#define M32R_IRQ_MFT1 (17) /* MFT1 */ +#define M32R_IRQ_MFT2 (18) /* MFT2 */ +#define M32R_IRQ_MFT3 (19) /* MFT3 */ +#ifdef CONFIG_CHIP_M32104 +#define M32R_IRQ_MFTX0 (24) /* MFTX0 */ +#define M32R_IRQ_MFTX1 (25) /* MFTX1 */ +#define M32R_IRQ_DMA0 (32) /* DMA0 */ +#define M32R_IRQ_DMA1 (33) /* DMA1 */ +#define M32R_IRQ_DMA2 (34) /* DMA2 */ +#define M32R_IRQ_DMA3 (35) /* DMA3 */ +#define M32R_IRQ_SIO0_R (40) /* SIO0 send */ +#define M32R_IRQ_SIO0_S (41) /* SIO0 receive */ +#define M32R_IRQ_SIO1_R (42) /* SIO1 send */ +#define M32R_IRQ_SIO1_S (43) /* SIO1 receive */ +#define M32R_IRQ_SIO2_R (44) /* SIO2 send */ +#define M32R_IRQ_SIO2_S (45) /* SIO2 receive */ +#define M32R_IRQ_SIO3_R (46) /* SIO3 send */ +#define M32R_IRQ_SIO3_S (47) /* SIO3 receive */ +#define M32R_IRQ_ADC (56) /* ADC */ +#define M32R_IRQ_PC (57) /* PC */ +#else /* ! M32104 */ +#define M32R_IRQ_DMA0 (32) /* DMA0 */ +#define M32R_IRQ_DMA1 (33) /* DMA1 */ +#define M32R_IRQ_SIO0_R (48) /* SIO0 send */ +#define M32R_IRQ_SIO0_S (49) /* SIO0 receive */ +#define M32R_IRQ_SIO1_R (50) /* SIO1 send */ +#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */ +#define M32R_IRQ_SIO2_R (52) /* SIO2 send */ +#define M32R_IRQ_SIO2_S (53) /* SIO2 receive */ +#define M32R_IRQ_SIO3_R (54) /* SIO3 send */ +#define M32R_IRQ_SIO3_S (55) /* SIO3 receive */ +#define M32R_IRQ_SIO4_R (56) /* SIO4 send */ +#define M32R_IRQ_SIO4_S (57) /* SIO4 receive */ +#endif /* ! M32104 */ + +#ifdef CONFIG_SMP +#define M32R_IRQ_IPI0 (56) +#define M32R_IRQ_IPI1 (57) +#define M32R_IRQ_IPI2 (58) +#define M32R_IRQ_IPI3 (59) +#define M32R_IRQ_IPI4 (60) +#define M32R_IRQ_IPI5 (61) +#define M32R_IRQ_IPI6 (62) +#define M32R_IRQ_IPI7 (63) +#define M32R_CPUID_PORTL (0xffffffe0) + +#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET) + +#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME3_PORTL (0x1c+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID3_PORTL (0x2c+M32R_FPGA_TOP) +#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP) +#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP) + +#endif /* CONFIG_SMP */ + +#ifndef __ASSEMBLY__ +typedef struct { + unsigned long icucr; /* ICU Control Register */ +} icu_data_t; +#endif + +#endif /* _M32102_H_ */ diff --git a/arch/m32r/include/asm/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h new file mode 100644 index 0000000..2dc89d6 --- /dev/null +++ b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h @@ -0,0 +1,161 @@ +#ifndef _M32104UT_M32104UT_PLD_H +#define _M32104UT_M32104UT_PLD_H + +/* + * include/asm-m32r/m32104ut/m32104ut_pld.h + * + * Definitions for Programable Logic Device(PLD) on M32104UT board. + * Based on m32700ut_pld.h + * + * Copyright (c) 2002 Takeo Takahashi + * Copyright (c) 2005 Naoto Sugai + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#if defined(CONFIG_PLAT_M32104UT) +#define PLD_PLAT_BASE 0x02c00000 +#else +#error "no platform configuration" +#endif + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + */ + +#define PLD_IRQ_INT0 (M32104UT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_CFIREQ (M32104UT_PLD_IRQ_BASE + 3) /* CF IREQ */ +#define PLD_IRQ_CFC_INSERT (M32104UT_PLD_IRQ_BASE + 4) /* CF Insert */ +#define PLD_IRQ_CFC_EJECT (M32104UT_PLD_IRQ_BASE + 5) /* CF Eject */ +#define PLD_IRQ_EXINT (M32104UT_PLD_IRQ_BASE + 6) /* EXINT */ +#define PLD_IRQ_MMCCARD (M32104UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ +#define PLD_IRQ_SC_ERROR (M32104UT_PLD_IRQ_BASE + 13) /* SC error */ +#define PLD_IRQ_SC_RCV (M32104UT_PLD_IRQ_BASE + 14) /* SC receive */ +#define PLD_IRQ_SC_SND (M32104UT_PLD_IRQ_BASE + 15) /* SC send */ + +#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) +#define PLD_ICUISTS_VECB_MASK (0xf000) +#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) +#define PLD_ICUISTS_ISN_MASK (0x07c0) +#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) +#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) +#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) +#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) +#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) +#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) +#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) +#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) +#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) +#define PLD_ICUCR_IEN (0x1000) +#define PLD_ICUCR_IREQ (0x0100) +#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ +#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ +#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ +#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ +#define PLD_ICUCR_ILEVEL0 (0x0000) +#define PLD_ICUCR_ILEVEL1 (0x0001) +#define PLD_ICUCR_ILEVEL2 (0x0002) +#define PLD_ICUCR_ILEVEL3 (0x0003) +#define PLD_ICUCR_ILEVEL4 (0x0004) +#define PLD_ICUCR_ILEVEL5 (0x0005) +#define PLD_ICUCR_ILEVEL6 (0x0006) +#define PLD_ICUCR_ILEVEL7 (0x0007) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) +#define PLD_CPCR_CDP 0x0001 + +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif /* _M32104UT_M32104UT_PLD_H */ diff --git a/arch/m32r/include/asm/m32700ut/m32700ut_lan.h b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h new file mode 100644 index 0000000..aae810a --- /dev/null +++ b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h @@ -0,0 +1,103 @@ +#ifndef _M32700UT_M32700UT_LAN_H +#define _M32700UT_M32700UT_LAN_H + +/* + * include/asm-m32r/m32700ut/m32700ut_lan.h + * + * M32700UT-LAN board + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define M32700UT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */) +#else +#define M32700UT_LAN_BASE (0x10000000 + NONCACHE_OFFSET) +#endif /* __ASSEMBLY__ */ + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + * ICUCR16: control register for SIO0 receive interrupt + * ICUCR17: control register for SIO0 send interrupt + */ +#define M32700UT_LAN_IRQ_LAN (M32700UT_LAN_PLD_IRQ_BASE + 1) /* LAN */ +#define M32700UT_LAN_IRQ_I2C (M32700UT_LAN_PLD_IRQ_BASE + 3) /* I2C */ + +#define M32700UT_LAN_ICUISTS __reg16(M32700UT_LAN_BASE + 0xc0002) +#define M32700UT_LAN_ICUISTS_VECB_MASK (0xf000) +#define M32700UT_LAN_VECB(x) ((x) & M32700UT_LAN_ICUISTS_VECB_MASK) +#define M32700UT_LAN_ICUISTS_ISN_MASK (0x07c0) +#define M32700UT_LAN_ICUISTS_ISN(x) ((x) & M32700UT_LAN_ICUISTS_ISN_MASK) +#define M32700UT_LAN_ICUIREQ0 __reg16(M32700UT_LAN_BASE + 0xc0004) +#define M32700UT_LAN_ICUCR1 __reg16(M32700UT_LAN_BASE + 0xc0010) +#define M32700UT_LAN_ICUCR3 __reg16(M32700UT_LAN_BASE + 0xc0014) + +/* + * AR register on PLD + */ +#define ARVCR0 __reg32(M32700UT_LAN_BASE + 0x40000) +#define ARVCR0_VDS 0x00080000 +#define ARVCR0_RST 0x00010000 +#define ARVCR1 __reg32(M32700UT_LAN_BASE + 0x40004) +#define ARVCR1_QVGA 0x02000000 +#define ARVCR1_NORMAL 0x01000000 +#define ARVCR1_HIEN 0x00010000 +#define ARVHCOUNT __reg32(M32700UT_LAN_BASE + 0x40008) +#define ARDATA __reg32(M32700UT_LAN_BASE + 0x40010) +#define ARINTSEL __reg32(M32700UT_LAN_BASE + 0x40014) +#define ARINTSEL_INT3 0x10000000 /* CPU INT3 */ +#define ARDATA32 __reg32(M32700UT_LAN_BASE + 0x04040010) // Block 5 +/* +#define ARINTSEL_SEL2 0x00002000 +#define ARINTSEL_SEL3 0x00001000 +#define ARINTSEL_SEL6 0x00000200 +#define ARINTSEL_SEL7 0x00000100 +#define ARINTSEL_SEL9 0x00000040 +#define ARINTSEL_SEL10 0x00000020 +#define ARINTSEL_SEL11 0x00000010 +#define ARINTSEL_SEL12 0x00000008 +*/ + +/* + * I2C register on PLD + */ +#define PLDI2CCR __reg32(M32700UT_LAN_BASE + 0x40040) +#define PLDI2CCR_ES0 0x00000001 /* enable I2C interface */ +#define PLDI2CMOD __reg32(M32700UT_LAN_BASE + 0x40044) +#define PLDI2CMOD_ACKCLK 0x00000200 +#define PLDI2CMOD_DTWD 0x00000100 +#define PLDI2CMOD_10BT 0x00000004 +#define PLDI2CMOD_ATM_NORMAL 0x00000000 +#define PLDI2CMOD_ATM_AUTO 0x00000003 +#define PLDI2CACK __reg32(M32700UT_LAN_BASE + 0x40048) +#define PLDI2CACK_ACK 0x00000001 +#define PLDI2CFREQ __reg32(M32700UT_LAN_BASE + 0x4004c) +#define PLDI2CCND __reg32(M32700UT_LAN_BASE + 0x40050) +#define PLDI2CCND_START 0x00000001 +#define PLDI2CCND_STOP 0x00000002 +#define PLDI2CSTEN __reg32(M32700UT_LAN_BASE + 0x40054) +#define PLDI2CSTEN_STEN 0x00000001 +#define PLDI2CDATA __reg32(M32700UT_LAN_BASE + 0x40060) +#define PLDI2CSTS __reg32(M32700UT_LAN_BASE + 0x40064) +#define PLDI2CSTS_TRX 0x00000020 +#define PLDI2CSTS_BB 0x00000010 +#define PLDI2CSTS_NOACK 0x00000001 /* 0:ack, 1:noack */ + +#endif /* _M32700UT_M32700UT_LAN_H */ diff --git a/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h new file mode 100644 index 0000000..4c24890 --- /dev/null +++ b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h @@ -0,0 +1,55 @@ +#ifndef _M32700UT_M32700UT_LCD_H +#define _M32700UT_M32700UT_LCD_H + +/* + * include/asm-m32r/m32700ut/m32700ut_lcd.h + * + * M32700UT-LCD board + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define M32700UT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */) +#else +#define M32700UT_LCD_BASE (0x10000000 + NONCACHE_OFFSET) +#endif /* __ASSEMBLY__ */ + +/* + * ICU + */ +#define M32700UT_LCD_IRQ_BAT_INT (M32700UT_LCD_PLD_IRQ_BASE + 1) +#define M32700UT_LCD_IRQ_USB_INT1 (M32700UT_LCD_PLD_IRQ_BASE + 2) +#define M32700UT_LCD_IRQ_AUDT0 (M32700UT_LCD_PLD_IRQ_BASE + 3) +#define M32700UT_LCD_IRQ_AUDT2 (M32700UT_LCD_PLD_IRQ_BASE + 4) +#define M32700UT_LCD_IRQ_BATSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 16) +#define M32700UT_LCD_IRQ_BATSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 17) +#define M32700UT_LCD_IRQ_ASNDSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 18) +#define M32700UT_LCD_IRQ_ASNDSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 19) +#define M32700UT_LCD_IRQ_ACNLSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 21) + +#define M32700UT_LCD_ICUISTS __reg16(M32700UT_LCD_BASE + 0x300002) +#define M32700UT_LCD_ICUISTS_VECB_MASK (0xf000) +#define M32700UT_LCD_VECB(x) ((x) & M32700UT_LCD_ICUISTS_VECB_MASK) +#define M32700UT_LCD_ICUISTS_ISN_MASK (0x07c0) +#define M32700UT_LCD_ICUISTS_ISN(x) ((x) & M32700UT_LCD_ICUISTS_ISN_MASK) +#define M32700UT_LCD_ICUIREQ0 __reg16(M32700UT_LCD_BASE + 0x300004) +#define M32700UT_LCD_ICUIREQ1 __reg16(M32700UT_LCD_BASE + 0x300006) +#define M32700UT_LCD_ICUCR1 __reg16(M32700UT_LCD_BASE + 0x300020) +#define M32700UT_LCD_ICUCR2 __reg16(M32700UT_LCD_BASE + 0x300022) +#define M32700UT_LCD_ICUCR3 __reg16(M32700UT_LCD_BASE + 0x300024) +#define M32700UT_LCD_ICUCR4 __reg16(M32700UT_LCD_BASE + 0x300026) +#define M32700UT_LCD_ICUCR16 __reg16(M32700UT_LCD_BASE + 0x300030) +#define M32700UT_LCD_ICUCR17 __reg16(M32700UT_LCD_BASE + 0x300032) +#define M32700UT_LCD_ICUCR18 __reg16(M32700UT_LCD_BASE + 0x300034) +#define M32700UT_LCD_ICUCR19 __reg16(M32700UT_LCD_BASE + 0x300036) +#define M32700UT_LCD_ICUCR21 __reg16(M32700UT_LCD_BASE + 0x30003a) + +#endif /* _M32700UT_M32700UT_LCD_H */ diff --git a/arch/m32r/include/asm/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h new file mode 100644 index 0000000..57623be --- /dev/null +++ b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h @@ -0,0 +1,259 @@ +#ifndef _M32700UT_M32700UT_PLD_H +#define _M32700UT_M32700UT_PLD_H + +/* + * include/asm-m32r/m32700ut/m32700ut_pld.h + * + * Definitions for Programable Logic Device(PLD) on M32700UT board. + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_USRV) +#define PLD_PLAT_BASE 0x04c00000 +#else +#error "no platform configuration" +#endif + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) +#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + * ICUCR16: control register for SIO0 receive interrupt + * ICUCR17: control register for SIO0 send interrupt + */ +#if !defined(CONFIG_PLAT_USRV) +#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */ +#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */ +#define PLD_IRQ_CFIREQ (M32700UT_PLD_IRQ_BASE + 3) /* CF IREQ */ +#define PLD_IRQ_CFC_INSERT (M32700UT_PLD_IRQ_BASE + 4) /* CF Insert */ +#define PLD_IRQ_CFC_EJECT (M32700UT_PLD_IRQ_BASE + 5) /* CF Eject */ +#define PLD_IRQ_EXINT (M32700UT_PLD_IRQ_BASE + 6) /* EXINT */ +#define PLD_IRQ_INT7 (M32700UT_PLD_IRQ_BASE + 7) /* reserved */ +#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */ +#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */ +#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */ +#define PLD_IRQ_MMCCARD (M32700UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ +#define PLD_IRQ_INT12 (M32700UT_PLD_IRQ_BASE + 12) /* reserved */ +#define PLD_IRQ_SC_ERROR (M32700UT_PLD_IRQ_BASE + 13) /* SC error */ +#define PLD_IRQ_SC_RCV (M32700UT_PLD_IRQ_BASE + 14) /* SC receive */ +#define PLD_IRQ_SC_SND (M32700UT_PLD_IRQ_BASE + 15) /* SC send */ +#define PLD_IRQ_SIO0_RCV (M32700UT_PLD_IRQ_BASE + 16) /* SIO receive */ +#define PLD_IRQ_SIO0_SND (M32700UT_PLD_IRQ_BASE + 17) /* SIO send */ +#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */ +#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */ +#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */ +#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */ +#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */ +#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */ +#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */ +#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */ +#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */ +#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */ +#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */ +#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */ +#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */ +#define PLD_IRQ_INT31 (M32700UT_PLD_IRQ_BASE + 31) /* reserved */ + +#else /* CONFIG_PLAT_USRV */ + +#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */ +#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */ +#define PLD_IRQ_CF0 (M32700UT_PLD_IRQ_BASE + 3) /* CF0# */ +#define PLD_IRQ_CF1 (M32700UT_PLD_IRQ_BASE + 4) /* CF1# */ +#define PLD_IRQ_CF2 (M32700UT_PLD_IRQ_BASE + 5) /* CF2# */ +#define PLD_IRQ_CF3 (M32700UT_PLD_IRQ_BASE + 6) /* CF3# */ +#define PLD_IRQ_CF4 (M32700UT_PLD_IRQ_BASE + 7) /* CF4# */ +#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */ +#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */ +#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */ +#define PLD_IRQ_INT11 (M32700UT_PLD_IRQ_BASE + 11) /* reserved */ +#define PLD_IRQ_UART0 (M32700UT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */ +#define PLD_IRQ_UART1 (M32700UT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */ +#define PLD_IRQ_INT14 (M32700UT_PLD_IRQ_BASE + 14) /* reserved */ +#define PLD_IRQ_INT15 (M32700UT_PLD_IRQ_BASE + 15) /* reserved */ +#define PLD_IRQ_SNDINT (M32700UT_PLD_IRQ_BASE + 16) /* SNDINT# */ +#define PLD_IRQ_INT17 (M32700UT_PLD_IRQ_BASE + 17) /* reserved */ +#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */ +#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */ +#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */ +#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */ +#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */ +#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */ +#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */ +#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */ +#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */ +#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */ +#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */ +#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */ +#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */ + +#endif /* CONFIG_PLAT_USRV */ + +#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) +#define PLD_ICUISTS_VECB_MASK (0xf000) +#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) +#define PLD_ICUISTS_ISN_MASK (0x07c0) +#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) +#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004) +#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006) +#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100) +#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102) +#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) +#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) +#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) +#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) +#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c) +#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e) +#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110) +#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112) +#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) +#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116) +#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) +#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) +#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) +#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e) +#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120) +#define PLD_ICUCR_IEN (0x1000) +#define PLD_ICUCR_IREQ (0x0100) +#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ +#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ +#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ +#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ +#define PLD_ICUCR_ILEVEL0 (0x0000) +#define PLD_ICUCR_ILEVEL1 (0x0001) +#define PLD_ICUCR_ILEVEL2 (0x0002) +#define PLD_ICUCR_ILEVEL3 (0x0003) +#define PLD_ICUCR_ILEVEL4 (0x0004) +#define PLD_ICUCR_ILEVEL5 (0x0005) +#define PLD_ICUCR_ILEVEL6 (0x0006) +#define PLD_ICUCR_ILEVEL7 (0x0007) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) +#define PLD_CPCR_CF 0x0001 +#define PLD_CPCR_MMC 0x0002 + +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif /* _M32700UT_M32700UT_PLD.H */ diff --git a/arch/m32r/include/asm/m32r.h b/arch/m32r/include/asm/m32r.h new file mode 100644 index 0000000..214b44b --- /dev/null +++ b/arch/m32r/include/asm/m32r.h @@ -0,0 +1,160 @@ +#ifndef _ASM_M32R_M32R_H_ +#define _ASM_M32R_M32R_H_ + +/* + * Renesas M32R processor + * + * Copyright (C) 2003, 2004 Renesas Technology Corp. + */ + + +/* Chip type */ +#if defined(CONFIG_CHIP_XNUX_MP) || defined(CONFIG_CHIP_XNUX2_MP) +#include +#elif defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \ + || defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \ + || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104) +#include +#endif + +/* Platform type */ +#if defined(CONFIG_PLAT_M32700UT) +#include +#include +#include +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE +#define M32R_INT0ICU_ISTS M32700UT_LAN_ICUISTS +#define M32R_INT0ICU_IRQ_BASE M32700UT_LAN_PLD_IRQ_BASE +#define M32R_INT2ICU_ISTS M32700UT_LCD_ICUISTS +#define M32R_INT2ICU_IRQ_BASE M32700UT_LCD_PLD_IRQ_BASE +#endif /* CONFIG_PLAT_M32700UT */ + +#if defined(CONFIG_PLAT_OPSPUT) +#include +#include +#include +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE OPSPUT_PLD_IRQ_BASE +#define M32R_INT0ICU_ISTS OPSPUT_LAN_ICUISTS +#define M32R_INT0ICU_IRQ_BASE OPSPUT_LAN_PLD_IRQ_BASE +#define M32R_INT2ICU_ISTS OPSPUT_LCD_ICUISTS +#define M32R_INT2ICU_IRQ_BASE OPSPUT_LCD_PLD_IRQ_BASE +#endif /* CONFIG_PLAT_OPSPUT */ + +#if defined(CONFIG_PLAT_MAPPI2) +#include +#endif /* CONFIG_PLAT_MAPPI2 */ + +#if defined(CONFIG_PLAT_MAPPI3) +#include +#endif /* CONFIG_PLAT_MAPPI3 */ + +#if defined(CONFIG_PLAT_USRV) +#include +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE +#endif + +#if defined(CONFIG_PLAT_M32104UT) +#include +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE M32104UT_PLD_IRQ_BASE +#endif /* CONFIG_PLAT_M32104 */ + +/* + * M32R Register + */ + +/* + * MMU Register + */ + +#define MMU_REG_BASE (0xffff0000) +#define ITLB_BASE (0xfe000000) +#define DTLB_BASE (0xfe000800) + +#define NR_TLB_ENTRIES CONFIG_TLB_ENTRIES + +#define MATM MMU_REG_BASE /* MMU Address Translation Mode + Register */ +#define MPSZ (0x04 + MMU_REG_BASE) /* MMU Page Size Designation Register */ +#define MASID (0x08 + MMU_REG_BASE) /* MMU Address Space ID Register */ +#define MESTS (0x0c + MMU_REG_BASE) /* MMU Exception Status Register */ +#define MDEVA (0x10 + MMU_REG_BASE) /* MMU Operand Exception Virtual + Address Register */ +#define MDEVP (0x14 + MMU_REG_BASE) /* MMU Operand Exception Virtual Page + Number Register */ +#define MPTB (0x18 + MMU_REG_BASE) /* MMU Page Table Base Register */ +#define MSVA (0x20 + MMU_REG_BASE) /* MMU Search Virtual Address + Register */ +#define MTOP (0x24 + MMU_REG_BASE) /* MMU TLB Operation Register */ +#define MIDXI (0x28 + MMU_REG_BASE) /* MMU Index Register for + Instruciton */ +#define MIDXD (0x2c + MMU_REG_BASE) /* MMU Index Register for Operand */ + +#define MATM_offset (MATM - MMU_REG_BASE) +#define MPSZ_offset (MPSZ - MMU_REG_BASE) +#define MASID_offset (MASID - MMU_REG_BASE) +#define MESTS_offset (MESTS - MMU_REG_BASE) +#define MDEVA_offset (MDEVA - MMU_REG_BASE) +#define MDEVP_offset (MDEVP - MMU_REG_BASE) +#define MPTB_offset (MPTB - MMU_REG_BASE) +#define MSVA_offset (MSVA - MMU_REG_BASE) +#define MTOP_offset (MTOP - MMU_REG_BASE) +#define MIDXI_offset (MIDXI - MMU_REG_BASE) +#define MIDXD_offset (MIDXD - MMU_REG_BASE) + +#define MESTS_IT (1 << 0) /* Instruction TLB miss */ +#define MESTS_IA (1 << 1) /* Instruction Access Exception */ +#define MESTS_DT (1 << 4) /* Operand TLB miss */ +#define MESTS_DA (1 << 5) /* Operand Access Exception */ +#define MESTS_DRW (1 << 6) /* Operand Write Exception Flag */ + +/* + * PSW (Processor Status Word) + */ + +/* PSW bit */ +#define M32R_PSW_BIT_SM (7) /* Stack Mode */ +#define M32R_PSW_BIT_IE (6) /* Interrupt Enable */ +#define M32R_PSW_BIT_PM (3) /* Processor Mode [0:Supervisor,1:User] */ +#define M32R_PSW_BIT_C (0) /* Condition */ +#define M32R_PSW_BIT_BSM (7+8) /* Backup Stack Mode */ +#define M32R_PSW_BIT_BIE (6+8) /* Backup Interrupt Enable */ +#define M32R_PSW_BIT_BPM (3+8) /* Backup Processor Mode */ +#define M32R_PSW_BIT_BC (0+8) /* Backup Condition */ + +/* PSW bit map */ +#define M32R_PSW_SM (1UL<< M32R_PSW_BIT_SM) /* Stack Mode */ +#define M32R_PSW_IE (1UL<< M32R_PSW_BIT_IE) /* Interrupt Enable */ +#define M32R_PSW_PM (1UL<< M32R_PSW_BIT_PM) /* Processor Mode */ +#define M32R_PSW_C (1UL<< M32R_PSW_BIT_C) /* Condition */ +#define M32R_PSW_BSM (1UL<< M32R_PSW_BIT_BSM) /* Backup Stack Mode */ +#define M32R_PSW_BIE (1UL<< M32R_PSW_BIT_BIE) /* Backup Interrupt Enable */ +#define M32R_PSW_BPM (1UL<< M32R_PSW_BIT_BPM) /* Backup Processor Mode */ +#define M32R_PSW_BC (1UL<< M32R_PSW_BIT_BC) /* Backup Condition */ + +/* + * Direct address to SFR + */ + +#include +#ifdef CONFIG_MMU +#define NONCACHE_OFFSET (__PAGE_OFFSET + 0x20000000) +#else +#define NONCACHE_OFFSET __PAGE_OFFSET +#endif /* CONFIG_MMU */ + +#define M32R_ICU_ISTS_ADDR M32R_ICU_ISTS_PORTL+NONCACHE_OFFSET +#define M32R_ICU_IPICR_ADDR M32R_ICU_IPICR0_PORTL+NONCACHE_OFFSET +#define M32R_ICU_IMASK_ADDR M32R_ICU_IMASK_PORTL+NONCACHE_OFFSET +#define M32R_FPGA_CPU_NAME_ADDR M32R_FPGA_CPU_NAME0_PORTL+NONCACHE_OFFSET +#define M32R_FPGA_MODEL_ID_ADDR M32R_FPGA_MODEL_ID0_PORTL+NONCACHE_OFFSET +#define M32R_FPGA_VERSION_ADDR M32R_FPGA_VERSION0_PORTL+NONCACHE_OFFSET + +#endif /* _ASM_M32R_M32R_H_ */ diff --git a/arch/m32r/include/asm/m32r_mp_fpga.h b/arch/m32r/include/asm/m32r_mp_fpga.h new file mode 100644 index 0000000..976d2b9 --- /dev/null +++ b/arch/m32r/include/asm/m32r_mp_fpga.h @@ -0,0 +1,313 @@ +#ifndef _ASM_M32R_M32R_MP_FPGA_ +#define _ASM_M32R_M32R_MP_FPGA_ + +/* + * Renesas M32R-MP-FPGA + * + * Copyright (c) 2002 Hitoshi Yamamoto + * Copyright (c) 2003, 2004 Renesas Technology Corp. + */ + +/* + * ======================================================== + * M32R-MP-FPGA Memory Map + * ======================================================== + * 0x00000000 : Block#0 : 64[MB] + * 0x03E00000 : SFR + * 0x03E00000 : reserved + * 0x03EF0000 : FPGA + * 0x03EF1000 : reserved + * 0x03EF4000 : CKM + * 0x03EF4000 : BSELC + * 0x03EF5000 : reserved + * 0x03EFC000 : MFT + * 0x03EFD000 : SIO + * 0x03EFE000 : reserved + * 0x03EFF000 : ICU + * 0x03F00000 : Internal SRAM 64[KB] + * 0x03F10000 : reserved + * -------------------------------------------------------- + * 0x04000000 : Block#1 : 64[MB] + * 0x04000000 : Debug board SRAM 4[MB] + * 0x04400000 : reserved + * -------------------------------------------------------- + * 0x08000000 : Block#2 : 64[MB] + * -------------------------------------------------------- + * 0x0C000000 : Block#3 : 64[MB] + * -------------------------------------------------------- + * 0x10000000 : Block#4 : 64[MB] + * -------------------------------------------------------- + * 0x14000000 : Block#5 : 64[MB] + * -------------------------------------------------------- + * 0x18000000 : Block#6 : 64[MB] + * -------------------------------------------------------- + * 0x1C000000 : Block#7 : 64[MB] + * -------------------------------------------------------- + * 0xFE000000 : TLB + * 0xFE000000 : ITLB + * 0xFE000080 : reserved + * 0xFE000800 : DTLB + * 0xFE000880 : reserved + * -------------------------------------------------------- + * 0xFF000000 : System area + * 0xFFFF0000 : MMU + * 0xFFFF0030 : reserved + * 0xFFFF8000 : Debug function + * 0xFFFFA000 : reserved + * 0xFFFFC000 : CPU control + * 0xFFFFFFFF + * ======================================================== + */ + +/*======================================================================* + * Special Function Register + *======================================================================*/ +#define M32R_SFR_OFFSET (0x00E00000) /* 0x03E00000-0x03EFFFFF 1[MB] */ + +/* + * FPGA registers. + */ +#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET) + +#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP) +#define M32R_FPGA_CPU_NAME3_PORTL (0x1C+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP) +#define M32R_FPGA_MODEL_ID3_PORTL (0x2C+M32R_FPGA_TOP) +#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP) +#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP) + +/* + * Clock and Power Manager registers. + */ +#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET) + +#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET) +#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET) +#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET) + +/* + * Block SELect Controller registers. + */ +#define M32R_BSELC_OFFSET (0x000F5000+M32R_SFR_OFFSET) + +#define M32R_BSEL0_CR0_PORTL (0x000+M32R_BSELC_OFFSET) +#define M32R_BSEL0_CR1_PORTL (0x004+M32R_BSELC_OFFSET) +#define M32R_BSEL1_CR0_PORTL (0x100+M32R_BSELC_OFFSET) +#define M32R_BSEL1_CR1_PORTL (0x104+M32R_BSELC_OFFSET) +#define M32R_BSEL2_CR0_PORTL (0x200+M32R_BSELC_OFFSET) +#define M32R_BSEL2_CR1_PORTL (0x204+M32R_BSELC_OFFSET) +#define M32R_BSEL3_CR0_PORTL (0x300+M32R_BSELC_OFFSET) +#define M32R_BSEL3_CR1_PORTL (0x304+M32R_BSELC_OFFSET) +#define M32R_BSEL4_CR0_PORTL (0x400+M32R_BSELC_OFFSET) +#define M32R_BSEL4_CR1_PORTL (0x404+M32R_BSELC_OFFSET) +#define M32R_BSEL5_CR0_PORTL (0x500+M32R_BSELC_OFFSET) +#define M32R_BSEL5_CR1_PORTL (0x504+M32R_BSELC_OFFSET) +#define M32R_BSEL6_CR0_PORTL (0x600+M32R_BSELC_OFFSET) +#define M32R_BSEL6_CR1_PORTL (0x604+M32R_BSELC_OFFSET) +#define M32R_BSEL7_CR0_PORTL (0x700+M32R_BSELC_OFFSET) +#define M32R_BSEL7_CR1_PORTL (0x704+M32R_BSELC_OFFSET) + +/* + * Multi Function Timer registers. + */ +#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET) + +#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */ +#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */ + +#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET) +#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */ +#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */ +#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */ +#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */ +#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */ + +#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET) +#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */ +#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */ +#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */ +#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */ +#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */ + +#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET) +#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */ +#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */ +#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */ +#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */ +#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */ + +#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET) +#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */ +#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */ +#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */ +#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */ +#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */ + +#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET) +#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */ +#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */ +#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */ +#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */ +#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */ + +#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET) +#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */ +#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */ +#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */ +#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */ +#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */ + +#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */ +#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */ +#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */ +#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */ +#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */ +#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */ +#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */ +#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */ +#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */ +#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */ +#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */ +#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */ + +#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */ +#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */ +#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */ +#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */ +#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */ +#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */ +#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */ +#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */ +#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */ +#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */ +#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */ +#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */ +#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */ +#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */ +#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */ + +/* + * Serial I/O registers. + */ +#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET) + +#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET) +#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET) +#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET) +#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET) +#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET) +#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET) +#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET) +#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET) +#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET) + +/* + * Interrupt Control Unit registers. + */ +#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET) + +#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET) +#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET) +#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET) +#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET) +#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET) +#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */ +#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */ +#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */ +#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */ +#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */ +#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */ +#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */ +#define M32R_ICU_CR8_PORTL (0x218+M32R_ICU_OFFSET) /* INT7 */ +#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* SIO0 RX */ +#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* SIO0 TX */ +#define M32R_ICU_CR40_PORTL (0x29C+M32R_ICU_OFFSET) /* DMAC0 */ +#define M32R_ICU_CR41_PORTL (0x2A0+M32R_ICU_OFFSET) /* DMAC1 */ +#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* MFT0 */ +#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* MFT1 */ +#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* MFT2 */ +#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* MFT3 */ +#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* MFT4 */ +#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* MFT5 */ +#define M32R_ICU_IPICR0_PORTL (0x2DC+M32R_ICU_OFFSET) /* IPI0 */ +#define M32R_ICU_IPICR1_PORTL (0x2E0+M32R_ICU_OFFSET) /* IPI1 */ +#define M32R_ICU_IPICR2_PORTL (0x2E4+M32R_ICU_OFFSET) /* IPI2 */ +#define M32R_ICU_IPICR3_PORTL (0x2E8+M32R_ICU_OFFSET) /* IPI3 */ +#define M32R_ICU_IPICR4_PORTL (0x2EC+M32R_ICU_OFFSET) /* IPI4 */ +#define M32R_ICU_IPICR5_PORTL (0x2F0+M32R_ICU_OFFSET) /* IPI5 */ +#define M32R_ICU_IPICR6_PORTL (0x2F4+M32R_ICU_OFFSET) /* IPI6 */ +#define M32R_ICU_IPICR7_PORTL (0x2FC+M32R_ICU_OFFSET) /* IPI7 */ + +#define M32R_ICUISTS_VECB(val) ((val>>28) & 0xF) +#define M32R_ICUISTS_ISN(val) ((val>>22) & 0x3F) +#define M32R_ICUISTS_PIML(val) ((val>>16) & 0x7) + +#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */ +#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */ +#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */ +#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */ +#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */ +#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */ +#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */ +#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */ + +#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */ +#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */ +#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */ +#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */ +#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/ +#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */ +#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */ +#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */ +#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */ +#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */ +#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */ +#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */ +#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */ +#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */ +#define M32R_ICUCR_ILEVEL_MASK (7UL) + +#define M32R_IRQ_INT0 (1) /* INT0 */ +#define M32R_IRQ_INT1 (2) /* INT1 */ +#define M32R_IRQ_INT2 (3) /* INT2 */ +#define M32R_IRQ_INT3 (4) /* INT3 */ +#define M32R_IRQ_INT4 (5) /* INT4 */ +#define M32R_IRQ_INT5 (6) /* INT5 */ +#define M32R_IRQ_INT6 (7) /* INT6 */ +#define M32R_IRQ_INT7 (8) /* INT7 */ +#define M32R_IRQ_MFT0 (16) /* MFT0 */ +#define M32R_IRQ_MFT1 (17) /* MFT1 */ +#define M32R_IRQ_MFT2 (18) /* MFT2 */ +#define M32R_IRQ_MFT3 (19) /* MFT3 */ +#define M32R_IRQ_MFT4 (20) /* MFT4 */ +#define M32R_IRQ_MFT5 (21) /* MFT5 */ +#define M32R_IRQ_DMAC0 (32) /* DMAC0 */ +#define M32R_IRQ_DMAC1 (33) /* DMAC1 */ +#define M32R_IRQ_SIO0_R (48) /* SIO0 receive */ +#define M32R_IRQ_SIO0_S (49) /* SIO0 send */ +#define M32R_IRQ_SIO1_R (50) /* SIO1 send */ +#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */ +#define M32R_IRQ_IPI0 (56) /* IPI0 */ +#define M32R_IRQ_IPI1 (57) /* IPI1 */ +#define M32R_IRQ_IPI2 (58) /* IPI2 */ +#define M32R_IRQ_IPI3 (59) /* IPI3 */ +#define M32R_IRQ_IPI4 (60) /* IPI4 */ +#define M32R_IRQ_IPI5 (61) /* IPI5 */ +#define M32R_IRQ_IPI6 (62) /* IPI6 */ +#define M32R_IRQ_IPI7 (63) /* IPI7 */ + +/*======================================================================* + * CPU + *======================================================================*/ + +#define M32R_CPUID_PORTL (0xFFFFFFE0) +#define M32R_MCICAR_PORTL (0xFFFFFFF0) +#define M32R_MCDCAR_PORTL (0xFFFFFFF4) +#define M32R_MCCR_PORTL (0xFFFFFFFC) + +#endif /* _ASM_M32R_M32R_MP_FPGA_ */ diff --git a/arch/m32r/include/asm/mappi2/mappi2_pld.h b/arch/m32r/include/asm/mappi2/mappi2_pld.h new file mode 100644 index 0000000..2624c9d --- /dev/null +++ b/arch/m32r/include/asm/mappi2/mappi2_pld.h @@ -0,0 +1,150 @@ +#ifndef _MAPPI2_PLD_H +#define _MAPPI2_PLD_H + +/* + * include/asm-m32r/mappi2/mappi2_pld.h + * + * Definitions for Extended IO Logic on MAPPI2 board. + * based on m32700ut_pld.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* FIXME: + * Some C functions use non-cache address, so can't define non-cache address. + */ +#define PLD_BASE (0x10c00000 /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (0x10c00000 + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) + + +/*==== ICU ====*/ +#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ +#define M32R_IRQ_I2C (28) /* I2C-BUS */ +#if 1 +#define PLD_IRQ_CFIREQ (40) /* CFC Card Interrupt */ +#define PLD_IRQ_CFC_INSERT (41) /* CFC Card Insert */ +#define PLD_IRQ_CFC_EJECT (42) /* CFC Card Eject */ +#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ +#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ +#else +#define PLD_IRQ_CFIREQ (34) /* CFC Card Interrupt */ +#define PLD_IRQ_CFC_INSERT (35) /* CFC Card Insert */ +#define PLD_IRQ_CFC_EJECT (36) /* CFC Card Eject */ +#define PLD_IRQ_MMCCARD (37) /* MMC Card Insert */ +#define PLD_IRQ_MMCIRQ (38) /* MMC Transfer Done */ +#endif + + +#if 0 +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +#endif + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + + +#if 0 +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif + +#endif /* _MAPPI2_PLD.H */ diff --git a/arch/m32r/include/asm/mappi3/mappi3_pld.h b/arch/m32r/include/asm/mappi3/mappi3_pld.h new file mode 100644 index 0000000..451c40e --- /dev/null +++ b/arch/m32r/include/asm/mappi3/mappi3_pld.h @@ -0,0 +1,142 @@ +#ifndef _MAPPI3_PLD_H +#define _MAPPI3_PLD_H + +/* + * include/asm-m32r/mappi3/mappi3_pld.h + * + * Definitions for Extended IO Logic on MAPPI3 board. + * based on m32700ut_pld.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* FIXME: + * Some C functions use non-cache address, so can't define non-cache address. + */ +#define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (0x1c000000 + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) + +/* ICU */ +#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ +#define M32R_IRQ_I2C (28) /* I2C-BUS */ +#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */ +#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert & Eject */ +#define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */ +#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ +#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ + +#if 0 +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +#endif + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + +#if 0 +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif + +/* Reset Control */ +#define PLD_REBOOT __reg16(PLD_BASE + 0x38000) + +#endif /* _MAPPI3_PLD.H */ diff --git a/arch/m32r/include/asm/mc146818rtc.h b/arch/m32r/include/asm/mc146818rtc.h new file mode 100644 index 0000000..aa1b7bf --- /dev/null +++ b/arch/m32r/include/asm/mc146818rtc.h @@ -0,0 +1,29 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#include + +#ifndef RTC_PORT +#define RTC_PORT(x) ((x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#define RTC_IRQ 8 + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/m32r/include/asm/mman.h b/arch/m32r/include/asm/mman.h new file mode 100644 index 0000000..516a897 --- /dev/null +++ b/arch/m32r/include/asm/mman.h @@ -0,0 +1,17 @@ +#ifndef __M32R_MMAN_H__ +#define __M32R_MMAN_H__ + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __M32R_MMAN_H__ */ diff --git a/arch/m32r/include/asm/mmu.h b/arch/m32r/include/asm/mmu.h new file mode 100644 index 0000000..150cb92 --- /dev/null +++ b/arch/m32r/include/asm/mmu.h @@ -0,0 +1,21 @@ +#ifndef _ASM_M32R_MMU_H +#define _ASM_M32R_MMU_H + +#if !defined(CONFIG_MMU) + +typedef struct { + unsigned long end_brk; +} mm_context_t; + +#else /* CONFIG_MMU */ + +/* Default "unsigned long" context */ +#ifndef CONFIG_SMP +typedef unsigned long mm_context_t; +#else +typedef unsigned long mm_context_t[NR_CPUS]; +#endif + +#endif /* CONFIG_MMU */ + +#endif /* _ASM_M32R_MMU_H */ diff --git a/arch/m32r/include/asm/mmu_context.h b/arch/m32r/include/asm/mmu_context.h new file mode 100644 index 0000000..91909e5 --- /dev/null +++ b/arch/m32r/include/asm/mmu_context.h @@ -0,0 +1,164 @@ +#ifndef _ASM_M32R_MMU_CONTEXT_H +#define _ASM_M32R_MMU_CONTEXT_H +#ifdef __KERNEL__ + +#include + +#define MMU_CONTEXT_ASID_MASK (0x000000FF) +#define MMU_CONTEXT_VERSION_MASK (0xFFFFFF00) +#define MMU_CONTEXT_FIRST_VERSION (0x00000100) +#define NO_CONTEXT (0x00000000) + +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include +#include + +/* + * Cache of MMU context last used. + */ +#ifndef CONFIG_SMP +extern unsigned long mmu_context_cache_dat; +#define mmu_context_cache mmu_context_cache_dat +#define mm_context(mm) mm->context +#else /* not CONFIG_SMP */ +extern unsigned long mmu_context_cache_dat[]; +#define mmu_context_cache mmu_context_cache_dat[smp_processor_id()] +#define mm_context(mm) mm->context[smp_processor_id()] +#endif /* not CONFIG_SMP */ + +#define set_tlb_tag(entry, tag) (*entry = (tag & PAGE_MASK)|get_asid()) +#define set_tlb_data(entry, data) (*entry = (data | _PAGE_PRESENT)) + +#ifdef CONFIG_MMU +#define enter_lazy_tlb(mm, tsk) do { } while (0) + +static inline void get_new_mmu_context(struct mm_struct *mm) +{ + unsigned long mc = ++mmu_context_cache; + + if (!(mc & MMU_CONTEXT_ASID_MASK)) { + /* We exhaust ASID of this version. + Flush all TLB and start new cycle. */ + local_flush_tlb_all(); + /* Fix version if needed. + Note that we avoid version #0 to distingush NO_CONTEXT. */ + if (!mc) + mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION; + } + mm_context(mm) = mc; +} + +/* + * Get MMU context if needed. + */ +static inline void get_mmu_context(struct mm_struct *mm) +{ + if (mm) { + unsigned long mc = mmu_context_cache; + + /* Check if we have old version of context. + If it's old, we need to get new context with new version. */ + if ((mm_context(mm) ^ mc) & MMU_CONTEXT_VERSION_MASK) + get_new_mmu_context(mm); + } +} + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ +#ifndef CONFIG_SMP + mm->context = NO_CONTEXT; +#else /* CONFIG_SMP */ + int num_cpus = num_online_cpus(); + int i; + + for (i = 0 ; i < num_cpus ; i++) + mm->context[i] = NO_CONTEXT; +#endif /* CONFIG_SMP */ + + return 0; +} + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +#define destroy_context(mm) do { } while (0) + +static inline void set_asid(unsigned long asid) +{ + *(volatile unsigned long *)MASID = (asid & MMU_CONTEXT_ASID_MASK); +} + +static inline unsigned long get_asid(void) +{ + unsigned long asid; + + asid = *(volatile long *)MASID; + asid &= MMU_CONTEXT_ASID_MASK; + + return asid; +} + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void activate_context(struct mm_struct *mm) +{ + get_mmu_context(mm); + set_asid(mm_context(mm) & MMU_CONTEXT_ASID_MASK); +} + +static inline void switch_mm(struct mm_struct *prev, + struct mm_struct *next, struct task_struct *tsk) +{ +#ifdef CONFIG_SMP + int cpu = smp_processor_id(); +#endif /* CONFIG_SMP */ + + if (prev != next) { +#ifdef CONFIG_SMP + cpu_set(cpu, next->cpu_vm_mask); +#endif /* CONFIG_SMP */ + /* Set MPTB = next->pgd */ + *(volatile unsigned long *)MPTB = (unsigned long)next->pgd; + activate_context(next); + } +#ifdef CONFIG_SMP + else + if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) + activate_context(next); +#endif /* CONFIG_SMP */ +} + +#define deactivate_mm(tsk, mm) do { } while (0) + +#define activate_mm(prev, next) \ + switch_mm((prev), (next), NULL) + +#else /* not CONFIG_MMU */ +#define get_mmu_context(mm) do { } while (0) +#define init_new_context(tsk,mm) (0) +#define destroy_context(mm) do { } while (0) +#define set_asid(asid) do { } while (0) +#define get_asid() (0) +#define activate_context(mm) do { } while (0) +#define switch_mm(prev,next,tsk) do { } while (0) +#define deactivate_mm(mm,tsk) do { } while (0) +#define activate_mm(prev,next) do { } while (0) +#define enter_lazy_tlb(mm,tsk) do { } while (0) +#endif /* not CONFIG_MMU */ + +#endif /* not __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_M32R_MMU_CONTEXT_H */ diff --git a/arch/m32r/include/asm/mmzone.h b/arch/m32r/include/asm/mmzone.h new file mode 100644 index 0000000..9f3b5ac --- /dev/null +++ b/arch/m32r/include/asm/mmzone.h @@ -0,0 +1,59 @@ +/* + * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002 + * + */ + +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ + +#include + +#ifdef CONFIG_DISCONTIGMEM + +extern struct pglist_data *node_data[]; +#define NODE_DATA(nid) (node_data[nid]) + +#define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn) +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) \ +({ \ + pg_data_t *__pgdat = NODE_DATA(nid); \ + __pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1; \ +}) + +#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) +/* + * pfn_valid should be made as fast as possible, and the current definition + * is valid for machines that are NUMA, but still contiguous, which is what + * is currently supported. A more generalised, but slower definition would + * be something like this - mbligh: + * ( pfn_to_pgdat(pfn) && ((pfn) < node_end_pfn(pfn_to_nid(pfn))) ) + */ +#if 1 /* M32R_FIXME */ +#define pfn_valid(pfn) (1) +#else +#define pfn_valid(pfn) ((pfn) < num_physpages) +#endif + +/* + * generic node memory support, the following assumptions apply: + */ + +static __inline__ int pfn_to_nid(unsigned long pfn) +{ + int node; + + for (node = 0 ; node < MAX_NUMNODES ; node++) + if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node)) + break; + + return node; +} + +static __inline__ struct pglist_data *pfn_to_pgdat(unsigned long pfn) +{ + return(NODE_DATA(pfn_to_nid(pfn))); +} + +#endif /* CONFIG_DISCONTIGMEM */ +#endif /* _ASM_MMZONE_H_ */ diff --git a/arch/m32r/include/asm/module.h b/arch/m32r/include/asm/module.h new file mode 100644 index 0000000..eb73ee0 --- /dev/null +++ b/arch/m32r/include/asm/module.h @@ -0,0 +1,10 @@ +#ifndef _ASM_M32R_MODULE_H +#define _ASM_M32R_MODULE_H + +struct mod_arch_specific { }; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#endif /* _ASM_M32R_MODULE_H */ diff --git a/arch/m32r/include/asm/msgbuf.h b/arch/m32r/include/asm/msgbuf.h new file mode 100644 index 0000000..0d5a877 --- /dev/null +++ b/arch/m32r/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _ASM_M32R_MSGBUF_H +#define _ASM_M32R_MSGBUF_H + +/* + * The msqid64_ds structure for m32r architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_M32R_MSGBUF_H */ diff --git a/arch/m32r/include/asm/mutex.h b/arch/m32r/include/asm/mutex.h new file mode 100644 index 0000000..458c1f7 --- /dev/null +++ b/arch/m32r/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/m32r/include/asm/opsput/opsput_lan.h b/arch/m32r/include/asm/opsput/opsput_lan.h new file mode 100644 index 0000000..a5f18dd --- /dev/null +++ b/arch/m32r/include/asm/opsput/opsput_lan.h @@ -0,0 +1,52 @@ +#ifndef _OPSPUT_OPSPUT_LAN_H +#define _OPSPUT_OPSPUT_LAN_H + +/* + * include/asm-m32r/opsput/opsput_lan.h + * + * OPSPUT-LAN board + * + * Copyright (c) 2002-2004 Takeo Takahashi, Mamoru Sakugawa + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define OPSPUT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */) +#else +#define OPSPUT_LAN_BASE (0x10000000 + NONCACHE_OFFSET) +#endif /* __ASSEMBLY__ */ + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + * ICUCR16: control register for SIO0 receive interrupt + * ICUCR17: control register for SIO0 send interrupt + */ +#define OPSPUT_LAN_IRQ_LAN (OPSPUT_LAN_PLD_IRQ_BASE + 1) /* LAN */ +#define OPSPUT_LAN_IRQ_I2C (OPSPUT_LAN_PLD_IRQ_BASE + 3) /* I2C */ + +#define OPSPUT_LAN_ICUISTS __reg16(OPSPUT_LAN_BASE + 0xc0002) +#define OPSPUT_LAN_ICUISTS_VECB_MASK (0xf000) +#define OPSPUT_LAN_VECB(x) ((x) & OPSPUT_LAN_ICUISTS_VECB_MASK) +#define OPSPUT_LAN_ICUISTS_ISN_MASK (0x07c0) +#define OPSPUT_LAN_ICUISTS_ISN(x) ((x) & OPSPUT_LAN_ICUISTS_ISN_MASK) +#define OPSPUT_LAN_ICUIREQ0 __reg16(OPSPUT_LAN_BASE + 0xc0004) +#define OPSPUT_LAN_ICUCR1 __reg16(OPSPUT_LAN_BASE + 0xc0010) +#define OPSPUT_LAN_ICUCR3 __reg16(OPSPUT_LAN_BASE + 0xc0014) + +#endif /* _OPSPUT_OPSPUT_LAN_H */ diff --git a/arch/m32r/include/asm/opsput/opsput_lcd.h b/arch/m32r/include/asm/opsput/opsput_lcd.h new file mode 100644 index 0000000..369c9f0 --- /dev/null +++ b/arch/m32r/include/asm/opsput/opsput_lcd.h @@ -0,0 +1,55 @@ +#ifndef _OPSPUT_OPSPUT_LCD_H +#define _OPSPUT_OPSPUT_LCD_H + +/* + * include/asm-m32r/opsput/opsput_lcd.h + * + * OPSPUT-LCD board + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define OPSPUT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */) +#else +#define OPSPUT_LCD_BASE (0x10000000 + NONCACHE_OFFSET) +#endif /* __ASSEMBLY__ */ + +/* + * ICU + */ +#define OPSPUT_LCD_IRQ_BAT_INT (OPSPUT_LCD_PLD_IRQ_BASE + 1) +#define OPSPUT_LCD_IRQ_USB_INT1 (OPSPUT_LCD_PLD_IRQ_BASE + 2) +#define OPSPUT_LCD_IRQ_AUDT0 (OPSPUT_LCD_PLD_IRQ_BASE + 3) +#define OPSPUT_LCD_IRQ_AUDT2 (OPSPUT_LCD_PLD_IRQ_BASE + 4) +#define OPSPUT_LCD_IRQ_BATSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 16) +#define OPSPUT_LCD_IRQ_BATSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 17) +#define OPSPUT_LCD_IRQ_ASNDSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 18) +#define OPSPUT_LCD_IRQ_ASNDSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 19) +#define OPSPUT_LCD_IRQ_ACNLSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 21) + +#define OPSPUT_LCD_ICUISTS __reg16(OPSPUT_LCD_BASE + 0x300002) +#define OPSPUT_LCD_ICUISTS_VECB_MASK (0xf000) +#define OPSPUT_LCD_VECB(x) ((x) & OPSPUT_LCD_ICUISTS_VECB_MASK) +#define OPSPUT_LCD_ICUISTS_ISN_MASK (0x07c0) +#define OPSPUT_LCD_ICUISTS_ISN(x) ((x) & OPSPUT_LCD_ICUISTS_ISN_MASK) +#define OPSPUT_LCD_ICUIREQ0 __reg16(OPSPUT_LCD_BASE + 0x300004) +#define OPSPUT_LCD_ICUIREQ1 __reg16(OPSPUT_LCD_BASE + 0x300006) +#define OPSPUT_LCD_ICUCR1 __reg16(OPSPUT_LCD_BASE + 0x300020) +#define OPSPUT_LCD_ICUCR2 __reg16(OPSPUT_LCD_BASE + 0x300022) +#define OPSPUT_LCD_ICUCR3 __reg16(OPSPUT_LCD_BASE + 0x300024) +#define OPSPUT_LCD_ICUCR4 __reg16(OPSPUT_LCD_BASE + 0x300026) +#define OPSPUT_LCD_ICUCR16 __reg16(OPSPUT_LCD_BASE + 0x300030) +#define OPSPUT_LCD_ICUCR17 __reg16(OPSPUT_LCD_BASE + 0x300032) +#define OPSPUT_LCD_ICUCR18 __reg16(OPSPUT_LCD_BASE + 0x300034) +#define OPSPUT_LCD_ICUCR19 __reg16(OPSPUT_LCD_BASE + 0x300036) +#define OPSPUT_LCD_ICUCR21 __reg16(OPSPUT_LCD_BASE + 0x30003a) + +#endif /* _OPSPUT_OPSPUT_LCD_H */ diff --git a/arch/m32r/include/asm/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h new file mode 100644 index 0000000..3f11ea1 --- /dev/null +++ b/arch/m32r/include/asm/opsput/opsput_pld.h @@ -0,0 +1,255 @@ +#ifndef _OPSPUT_OPSPUT_PLD_H +#define _OPSPUT_OPSPUT_PLD_H + +/* + * include/asm-m32r/opsput/opsput_pld.h + * + * Definitions for Programable Logic Device(PLD) on OPSPUT board. + * + * Copyright (c) 2002 Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#define PLD_PLAT_BASE 0x1cc00000 + +#ifndef __ASSEMBLY__ +/* + * C functions use non-cache address. + */ +#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) +#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* ICU + * ICUISTS: status register + * ICUIREQ0: request register + * ICUIREQ1: request register + * ICUCR3: control register for CFIREQ# interrupt + * ICUCR4: control register for CFC Card insert interrupt + * ICUCR5: control register for CFC Card eject interrupt + * ICUCR6: control register for external interrupt + * ICUCR11: control register for MMC Card insert/eject interrupt + * ICUCR13: control register for SC error interrupt + * ICUCR14: control register for SC receive interrupt + * ICUCR15: control register for SC send interrupt + * ICUCR16: control register for SIO0 receive interrupt + * ICUCR17: control register for SIO0 send interrupt + */ +#if !defined(CONFIG_PLAT_USRV) +#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */ +#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */ +#define PLD_IRQ_CFIREQ (OPSPUT_PLD_IRQ_BASE + 3) /* CF IREQ */ +#define PLD_IRQ_CFC_INSERT (OPSPUT_PLD_IRQ_BASE + 4) /* CF Insert */ +#define PLD_IRQ_CFC_EJECT (OPSPUT_PLD_IRQ_BASE + 5) /* CF Eject */ +#define PLD_IRQ_EXINT (OPSPUT_PLD_IRQ_BASE + 6) /* EXINT */ +#define PLD_IRQ_INT7 (OPSPUT_PLD_IRQ_BASE + 7) /* reserved */ +#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */ +#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */ +#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */ +#define PLD_IRQ_MMCCARD (OPSPUT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ +#define PLD_IRQ_INT12 (OPSPUT_PLD_IRQ_BASE + 12) /* reserved */ +#define PLD_IRQ_SC_ERROR (OPSPUT_PLD_IRQ_BASE + 13) /* SC error */ +#define PLD_IRQ_SC_RCV (OPSPUT_PLD_IRQ_BASE + 14) /* SC receive */ +#define PLD_IRQ_SC_SND (OPSPUT_PLD_IRQ_BASE + 15) /* SC send */ +#define PLD_IRQ_SIO0_RCV (OPSPUT_PLD_IRQ_BASE + 16) /* SIO receive */ +#define PLD_IRQ_SIO0_SND (OPSPUT_PLD_IRQ_BASE + 17) /* SIO send */ +#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */ +#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */ +#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */ +#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */ +#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */ +#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */ +#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */ +#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */ +#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */ +#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */ +#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */ +#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */ +#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */ +#define PLD_IRQ_INT31 (OPSPUT_PLD_IRQ_BASE + 31) /* reserved */ + +#else /* CONFIG_PLAT_USRV */ + +#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */ +#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */ +#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */ +#define PLD_IRQ_CF0 (OPSPUT_PLD_IRQ_BASE + 3) /* CF0# */ +#define PLD_IRQ_CF1 (OPSPUT_PLD_IRQ_BASE + 4) /* CF1# */ +#define PLD_IRQ_CF2 (OPSPUT_PLD_IRQ_BASE + 5) /* CF2# */ +#define PLD_IRQ_CF3 (OPSPUT_PLD_IRQ_BASE + 6) /* CF3# */ +#define PLD_IRQ_CF4 (OPSPUT_PLD_IRQ_BASE + 7) /* CF4# */ +#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */ +#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */ +#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */ +#define PLD_IRQ_INT11 (OPSPUT_PLD_IRQ_BASE + 11) /* reserved */ +#define PLD_IRQ_UART0 (OPSPUT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */ +#define PLD_IRQ_UART1 (OPSPUT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */ +#define PLD_IRQ_INT14 (OPSPUT_PLD_IRQ_BASE + 14) /* reserved */ +#define PLD_IRQ_INT15 (OPSPUT_PLD_IRQ_BASE + 15) /* reserved */ +#define PLD_IRQ_SNDINT (OPSPUT_PLD_IRQ_BASE + 16) /* SNDINT# */ +#define PLD_IRQ_INT17 (OPSPUT_PLD_IRQ_BASE + 17) /* reserved */ +#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */ +#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */ +#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */ +#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */ +#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */ +#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */ +#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */ +#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */ +#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */ +#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */ +#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */ +#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */ +#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */ + +#endif /* CONFIG_PLAT_USRV */ + +#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) +#define PLD_ICUISTS_VECB_MASK (0xf000) +#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) +#define PLD_ICUISTS_ISN_MASK (0x07c0) +#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) +#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004) +#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006) +#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100) +#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102) +#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) +#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) +#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) +#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) +#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c) +#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e) +#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110) +#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112) +#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) +#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116) +#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) +#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) +#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) +#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e) +#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120) +#define PLD_ICUCR_IEN (0x1000) +#define PLD_ICUCR_IREQ (0x0100) +#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ +#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ +#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ +#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ +#define PLD_ICUCR_ILEVEL0 (0x0000) +#define PLD_ICUCR_ILEVEL1 (0x0001) +#define PLD_ICUCR_ILEVEL2 (0x0002) +#define PLD_ICUCR_ILEVEL3 (0x0003) +#define PLD_ICUCR_ILEVEL4 (0x0004) +#define PLD_ICUCR_ILEVEL5 (0x0005) +#define PLD_ICUCR_ILEVEL6 (0x0006) +#define PLD_ICUCR_ILEVEL7 (0x0007) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) +#define PLD_CPCR_CF 0x0001 +#define PLD_CPCR_MMC 0x0002 + +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif /* _OPSPUT_OPSPUT_PLD.H */ diff --git a/arch/m32r/include/asm/page.h b/arch/m32r/include/asm/page.h new file mode 100644 index 0000000..c933308 --- /dev/null +++ b/arch/m32r/include/asm/page.h @@ -0,0 +1,87 @@ +#ifndef _ASM_M32R_PAGE_H +#define _ASM_M32R_PAGE_H + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifndef __ASSEMBLY__ + +extern void clear_page(void *to); +extern void copy_page(void *to, void *from); + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ + alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +#define pte_val(x) ((x).pte) +#define PTE_MASK PAGE_MASK + +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#endif /* !__ASSEMBLY__ */ + +/* + * This handles the memory map.. We could make this a config + * option, but too many people screw it up, and too few need + * it. + * + * A __PAGE_OFFSET of 0xC0000000 means that the kernel has + * a virtual address space of one gigabyte, which limits the + * amount of physical memory you can use to about 950MB. + * + * If you want more physical memory than this then see the CONFIG_HIGHMEM4G + * and CONFIG_HIGHMEM64G options in the kernel configuration. + */ + +#define __MEMORY_START CONFIG_MEMORY_START +#define __MEMORY_SIZE CONFIG_MEMORY_SIZE + +#ifdef CONFIG_MMU +#define __PAGE_OFFSET (0x80000000) +#else +#define __PAGE_OFFSET (0x00000000) +#endif + +#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET) +#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET)) + +#ifndef CONFIG_DISCONTIGMEM +#define PFN_BASE (CONFIG_MEMORY_START >> PAGE_SHIFT) +#define ARCH_PFN_OFFSET PFN_BASE +#define pfn_valid(pfn) (((pfn) - PFN_BASE) < max_mapnr) +#endif /* !CONFIG_DISCONTIGMEM */ + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC ) + +#define devmem_is_allowed(x) 1 + +#include +#include + +#endif /* _ASM_M32R_PAGE_H */ diff --git a/arch/m32r/include/asm/param.h b/arch/m32r/include/asm/param.h new file mode 100644 index 0000000..94c7701 --- /dev/null +++ b/arch/m32r/include/asm/param.h @@ -0,0 +1,23 @@ +#ifndef _ASM_M32R_PARAM_H +#define _ASM_M32R_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_M32R_PARAM_H */ + diff --git a/arch/m32r/include/asm/pci.h b/arch/m32r/include/asm/pci.h new file mode 100644 index 0000000..fe785d1 --- /dev/null +++ b/arch/m32r/include/asm/pci.h @@ -0,0 +1,8 @@ +#ifndef _ASM_M32R_PCI_H +#define _ASM_M32R_PCI_H + +#include + +#define PCI_DMA_BUS_IS_PHYS (1) + +#endif /* _ASM_M32R_PCI_H */ diff --git a/arch/m32r/include/asm/percpu.h b/arch/m32r/include/asm/percpu.h new file mode 100644 index 0000000..e316930 --- /dev/null +++ b/arch/m32r/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_M32R_PERCPU__ +#define __ARCH_M32R_PERCPU__ + +#include + +#endif /* __ARCH_M32R_PERCPU__ */ diff --git a/arch/m32r/include/asm/pgalloc.h b/arch/m32r/include/asm/pgalloc.h new file mode 100644 index 0000000..f11a2b9 --- /dev/null +++ b/arch/m32r/include/asm/pgalloc.h @@ -0,0 +1,76 @@ +#ifndef _ASM_M32R_PGALLOC_H +#define _ASM_M32R_PGALLOC_H + +#include + +#include + +#define pmd_populate_kernel(mm, pmd, pte) \ + set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte))) + +static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte) +{ + set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte))); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * Allocate and free page tables. + */ +static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm) +{ + pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); + + return pgd; +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + free_page((unsigned long)pgd); +} + +static __inline__ pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); + + return pte; +} + +static __inline__ pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *pte = alloc_page(GFP_KERNEL|__GFP_ZERO); + + pgtable_page_ctor(pte); + return pte; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long)pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + __free_page(pte); +} + +#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + * (In the PAE case we free the pmds as part of the pgd.) + */ + +#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb, x) do { } while (0) +#define pgd_populate(mm, pmd, pte) BUG() + +#define check_pgt_cache() do { } while (0) + +#endif /* _ASM_M32R_PGALLOC_H */ diff --git a/arch/m32r/include/asm/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h new file mode 100644 index 0000000..bca3475 --- /dev/null +++ b/arch/m32r/include/asm/pgtable-2level.h @@ -0,0 +1,78 @@ +#ifndef _ASM_M32R_PGTABLE_2LEVEL_H +#define _ASM_M32R_PGTABLE_2LEVEL_H +#ifdef __KERNEL__ + +/* + * traditional M32R two-level paging structure: + */ + +#define PGDIR_SHIFT 22 +#define PTRS_PER_PGD 1024 + +/* + * the M32R is two-level, so we don't really have any + * PMD directory physically. + */ +#define PMD_SHIFT 22 +#define PTRS_PER_PMD 1 + +#define PTRS_PER_PTE 1024 + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * The "pgd_xxx()" functions here are trivial for a folded two-level + * setup: the pgd is never bad, and a pmd always exists (as it's folded + * into the pgd entry) + */ +static inline int pgd_none(pgd_t pgd) { return 0; } +static inline int pgd_bad(pgd_t pgd) { return 0; } +static inline int pgd_present(pgd_t pgd) { return 1; } +#define pgd_clear(xp) do { } while (0) + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * (pmds are folded into pgds so this doesnt get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) +#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval) + +#define pgd_page_vaddr(pgd) \ +((unsigned long) __va(pgd_val(pgd) & PAGE_MASK)) + +#ifndef CONFIG_DISCONTIGMEM +#define pgd_page(pgd) (mem_map + ((pgd_val(pgd) >> PAGE_SHIFT) - PFN_BASE)) +#endif /* !CONFIG_DISCONTIGMEM */ + +static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address) +{ + return (pmd_t *) dir; +} + +#define ptep_get_and_clear(mm,addr,xp) __pte(xchg(&(xp)->pte, 0)) +#define pte_same(a, b) (pte_val(a) == pte_val(b)) +#define pte_page(x) pfn_to_page(pte_pfn(x)) +#define pte_none(x) (!pte_val(x)) +#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (((pte_val(pte) >> 2) & 0x7f) | (((pte_val(pte) >> 10)) << 7)) +#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7f) << 2) | (((off) >> 7) << 10) | _PAGE_FILE }) + +#endif /* __KERNEL__ */ +#endif /* _ASM_M32R_PGTABLE_2LEVEL_H */ diff --git a/arch/m32r/include/asm/pgtable.h b/arch/m32r/include/asm/pgtable.h new file mode 100644 index 0000000..e6359c5 --- /dev/null +++ b/arch/m32r/include/asm/pgtable.h @@ -0,0 +1,363 @@ +#ifndef _ASM_M32R_PGTABLE_H +#define _ASM_M32R_PGTABLE_H + +#include + +#ifdef __KERNEL__ +/* + * The Linux memory management assumes a three-level page table setup. On + * the M32R, we use that, but "fold" the mid level into the top-level page + * table, so that we physically have the same two-level page table as the + * M32R mmu expects. + * + * This file contains the functions and defines necessary to modify and use + * the M32R page table tree. + */ + +/* CAUTION!: If you change macro definitions in this file, you might have to + * change arch/m32r/mmu.S manually. + */ + +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include +#include + +struct mm_struct; +struct vm_area_struct; + +extern pgd_t swapper_pg_dir[1024]; +extern void paging_init(void); + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern unsigned long empty_zero_page[1024]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +#endif /* !__ASSEMBLY__ */ + +#ifndef __ASSEMBLY__ +#include +#endif + +#define pgtable_cache_init() do { } while (0) + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE - 1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE - 1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#ifndef __ASSEMBLY__ +/* Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ +#define VMALLOC_START KSEG2 +#define VMALLOC_END KSEG3 + +/* + * M32R TLB format + * + * [0] [1:19] [20:23] [24:31] + * +-----------------------+----+-------------+ + * | VPN |0000| ASID | + * +-----------------------+----+-------------+ + * +-+---------------------+----+-+---+-+-+-+-+ + * |0 PPN |0000|N|AC |L|G|V| | + * +-+---------------------+----+-+---+-+-+-+-+ + * RWX + */ + +#define _PAGE_BIT_DIRTY 0 /* software: page changed */ +#define _PAGE_BIT_FILE 0 /* when !present: nonlinear file + mapping */ +#define _PAGE_BIT_PRESENT 1 /* Valid: page is valid */ +#define _PAGE_BIT_GLOBAL 2 /* Global */ +#define _PAGE_BIT_LARGE 3 /* Large */ +#define _PAGE_BIT_EXEC 4 /* Execute */ +#define _PAGE_BIT_WRITE 5 /* Write */ +#define _PAGE_BIT_READ 6 /* Read */ +#define _PAGE_BIT_NONCACHABLE 7 /* Non cachable */ +#define _PAGE_BIT_ACCESSED 8 /* software: page referenced */ +#define _PAGE_BIT_PROTNONE 9 /* software: if not present */ + +#define _PAGE_DIRTY (1UL << _PAGE_BIT_DIRTY) +#define _PAGE_FILE (1UL << _PAGE_BIT_FILE) +#define _PAGE_PRESENT (1UL << _PAGE_BIT_PRESENT) +#define _PAGE_GLOBAL (1UL << _PAGE_BIT_GLOBAL) +#define _PAGE_LARGE (1UL << _PAGE_BIT_LARGE) +#define _PAGE_EXEC (1UL << _PAGE_BIT_EXEC) +#define _PAGE_WRITE (1UL << _PAGE_BIT_WRITE) +#define _PAGE_READ (1UL << _PAGE_BIT_READ) +#define _PAGE_NONCACHABLE (1UL << _PAGE_BIT_NONCACHABLE) +#define _PAGE_ACCESSED (1UL << _PAGE_BIT_ACCESSED) +#define _PAGE_PROTNONE (1UL << _PAGE_BIT_PROTNONE) + +#define _PAGE_TABLE \ + ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \ + | _PAGE_DIRTY ) +#define _KERNPG_TABLE \ + ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \ + | _PAGE_DIRTY ) +#define _PAGE_CHG_MASK \ + ( PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY ) + +#ifdef CONFIG_MMU +#define PAGE_NONE \ + __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) +#define PAGE_SHARED \ + __pgprot(_PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED) +#define PAGE_SHARED_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ \ + | _PAGE_ACCESSED) +#define PAGE_COPY \ + __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED) +#define PAGE_COPY_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED) +#define PAGE_READONLY \ + __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED) +#define PAGE_READONLY_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED) + +#define __PAGE_KERNEL \ + ( _PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ | _PAGE_DIRTY \ + | _PAGE_ACCESSED ) +#define __PAGE_KERNEL_RO ( __PAGE_KERNEL & ~_PAGE_WRITE ) +#define __PAGE_KERNEL_NOCACHE ( __PAGE_KERNEL | _PAGE_NONCACHABLE) + +#define MAKE_GLOBAL(x) __pgprot((x) | _PAGE_GLOBAL) + +#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL) +#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO) +#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE) + +#else +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_SHARED_EXEC __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_COPY_EXEC __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_READONLY_EXEC __pgprot(0) + +#define PAGE_KERNEL __pgprot(0) +#define PAGE_KERNEL_RO __pgprot(0) +#define PAGE_KERNEL_NOCACHE __pgprot(0) +#endif /* CONFIG_MMU */ + + /* xwr */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY_EXEC +#define __P101 PAGE_READONLY_EXEC +#define __P110 PAGE_COPY_EXEC +#define __P111 PAGE_COPY_EXEC + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY_EXEC +#define __S101 PAGE_READONLY_EXEC +#define __S110 PAGE_SHARED_EXEC +#define __S111 PAGE_SHARED_EXEC + +/* page table for 0-4MB for everybody */ + +#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE)) +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) ((pmd_val(x) & ~PAGE_MASK) != _KERNPG_TABLE) + +#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_dirty(pte_t pte) +{ + return pte_val(pte) & _PAGE_DIRTY; +} + +static inline int pte_young(pte_t pte) +{ + return pte_val(pte) & _PAGE_ACCESSED; +} + +static inline int pte_write(pte_t pte) +{ + return pte_val(pte) & _PAGE_WRITE; +} + +/* + * The following only works if pte_present() is not true. + */ +static inline int pte_file(pte_t pte) +{ + return pte_val(pte) & _PAGE_FILE; +} + +static inline int pte_special(pte_t pte) +{ + return 0; +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + pte_val(pte) &= ~_PAGE_DIRTY; + return pte; +} + +static inline pte_t pte_mkold(pte_t pte) +{ + pte_val(pte) &= ~_PAGE_ACCESSED; + return pte; +} + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte_val(pte) &= ~_PAGE_WRITE; + return pte; +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + pte_val(pte) |= _PAGE_DIRTY; + return pte; +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + pte_val(pte) |= _PAGE_ACCESSED; + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte_val(pte) |= _PAGE_WRITE; + return pte; +} + +static inline pte_t pte_mkspecial(pte_t pte) +{ + return pte; +} + +static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) +{ + return test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep); +} + +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + clear_bit(_PAGE_BIT_WRITE, ptep); +} + +/* + * Macro and implementation to make a page protection as uncachable. + */ +static inline pgprot_t pgprot_noncached(pgprot_t _prot) +{ + unsigned long prot = pgprot_val(_prot); + + prot |= _PAGE_NONCACHABLE; + return __pgprot(prot); +} + +#define pgprot_writecombine(prot) pgprot_noncached(prot) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), pgprot) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) \ + | pgprot_val(newprot))); + + return pte; +} + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ + +static inline void pmd_set(pmd_t * pmdp, pte_t * ptep) +{ + pmd_val(*pmdp) = (((unsigned long) ptep) & PAGE_MASK); +} + +#define pmd_page_vaddr(pmd) \ + ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + +#ifndef CONFIG_DISCONTIGMEM +#define pmd_page(pmd) (mem_map + ((pmd_val(pmd) >> PAGE_SHIFT) - PFN_BASE)) +#endif /* !CONFIG_DISCONTIGMEM */ + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) \ + (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) + +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +#define pmd_index(address) \ + (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) + +#define pte_index(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *)pmd_page_vaddr(*(dir)) + pte_index(address)) +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address)) +#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +/* Encode and de-code a swap entry */ +#define __swp_type(x) (((x).val >> 2) & 0x1f) +#define __swp_offset(x) ((x).val >> 10) +#define __swp_entry(type, offset) \ + ((swp_entry_t) { ((type) << 2) | ((offset) << 10) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#endif /* !__ASSEMBLY__ */ + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define __HAVE_ARCH_PTE_SAME +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_PGTABLE_H */ diff --git a/arch/m32r/include/asm/poll.h b/arch/m32r/include/asm/poll.h new file mode 100644 index 0000000..c98509d --- /dev/null +++ b/arch/m32r/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/m32r/include/asm/posix_types.h b/arch/m32r/include/asm/posix_types.h new file mode 100644 index 0000000..b309c58 --- /dev/null +++ b/arch/m32r/include/asm/posix_types.h @@ -0,0 +1,118 @@ +#ifndef _ASM_M32R_POSIX_TYPES_H +#define _ASM_M32R_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) */ + +#endif /* _ASM_M32R_POSIX_TYPES_H */ diff --git a/arch/m32r/include/asm/processor.h b/arch/m32r/include/asm/processor.h new file mode 100644 index 0000000..1a997fc --- /dev/null +++ b/arch/m32r/include/asm/processor.h @@ -0,0 +1,147 @@ +#ifndef _ASM_M32R_PROCESSOR_H +#define _ASM_M32R_PROCESSOR_H + +/* + * include/asm-m32r/processor.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 Linus Torvalds + * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata + */ + +#include +#include +#include /* pt_regs */ + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l; }) + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * Members of this structure are referenced in head.S, so think twice + * before touching them. [mj] + */ + +struct cpuinfo_m32r { + unsigned long pgtable_cache_sz; + unsigned long cpu_clock; + unsigned long bus_clock; + unsigned long timer_divide; + unsigned long loops_per_jiffy; +}; + +/* + * capabilities of CPUs + */ + +extern struct cpuinfo_m32r boot_cpu_data; + +#ifdef CONFIG_SMP +extern struct cpuinfo_m32r cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#else +#define cpu_data (&boot_cpu_data) +#define current_cpu_data boot_cpu_data +#endif + +/* + * User space process size: 2GB (default). + */ +#ifdef CONFIG_MMU +#define TASK_SIZE (0x80000000UL) +#else +#define TASK_SIZE (0x00400000UL) +#endif + +#ifdef __KERNEL__ +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP +#endif + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3) + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAX_TRAPS 10 + +struct debug_trap { + int nr_trap; + unsigned long addr[MAX_TRAPS]; + unsigned long insn[MAX_TRAPS]; +}; + +struct thread_struct { + unsigned long address; + unsigned long trap_no; /* Trap number */ + unsigned long error_code; /* Error code of trap */ + unsigned long lr; /* saved pc */ + unsigned long sp; /* user stack pointer */ + struct debug_trap debug_trap; +}; + +#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) + +#define INIT_THREAD { \ + .sp = INIT_SP, \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ + +/* User process Backup PSW */ +#define USERPS_BPSW (M32R_PSW_BSM|M32R_PSW_BIE|M32R_PSW_BPM) + +#define start_thread(regs, new_pc, new_spu) \ + do { \ + set_fs(USER_DS); \ + regs->psw = (regs->psw | USERPS_BPSW) & 0x0000FFFFUL; \ + regs->bpc = new_pc; \ + regs->spu = new_spu; \ + } while (0) + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +#define prepare_to_copy(tsk) do { } while (0) + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Copy and release all segment info associated with a VM */ +extern void copy_segments(struct task_struct *p, struct mm_struct * mm); +extern void release_segments(struct mm_struct * mm); + +extern unsigned long thread_saved_pc(struct task_struct *); + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while (0) +#define release_segments(mm) do { } while (0) + +unsigned long get_wchan(struct task_struct *p); +#define KSTK_EIP(tsk) ((tsk)->thread.lr) +#define KSTK_ESP(tsk) ((tsk)->thread.sp) + +#define THREAD_SIZE (2*PAGE_SIZE) + +#define cpu_relax() barrier() + +#endif /* _ASM_M32R_PROCESSOR_H */ diff --git a/arch/m32r/include/asm/ptrace.h b/arch/m32r/include/asm/ptrace.h new file mode 100644 index 0000000..a0755b9 --- /dev/null +++ b/arch/m32r/include/asm/ptrace.h @@ -0,0 +1,148 @@ +#ifndef _ASM_M32R_PTRACE_H +#define _ASM_M32R_PTRACE_H + +/* + * linux/include/asm-m32r/ptrace.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * M32R version: + * Copyright (C) 2001-2002, 2004 Hirokazu Takata + */ + +/* 0 - 13 are integer registers (general purpose registers). */ +#define PT_R4 0 +#define PT_R5 1 +#define PT_R6 2 +#define PT_REGS 3 +#define PT_R0 4 +#define PT_R1 5 +#define PT_R2 6 +#define PT_R3 7 +#define PT_R7 8 +#define PT_R8 9 +#define PT_R9 10 +#define PT_R10 11 +#define PT_R11 12 +#define PT_R12 13 +#define PT_SYSCNR 14 +#define PT_R13 PT_FP +#define PT_R14 PT_LR +#define PT_R15 PT_SP + +/* processor status and miscellaneous context registers. */ +#define PT_ACC0H 15 +#define PT_ACC0L 16 +#define PT_ACC1H 17 /* ISA_DSP_LEVEL2 only */ +#define PT_ACC1L 18 /* ISA_DSP_LEVEL2 only */ +#define PT_PSW 19 +#define PT_BPC 20 +#define PT_BBPSW 21 +#define PT_BBPC 22 +#define PT_SPU 23 +#define PT_FP 24 +#define PT_LR 25 +#define PT_SPI 26 +#define PT_ORIGR0 27 + +/* virtual pt_reg entry for gdb */ +#define PT_PC 30 +#define PT_CBR 31 +#define PT_EVB 32 + + +/* Control registers. */ +#define SPR_CR0 PT_PSW +#define SPR_CR1 PT_CBR /* read only */ +#define SPR_CR2 PT_SPI +#define SPR_CR3 PT_SPU +#define SPR_CR4 +#define SPR_CR5 PT_EVB /* part of M32R/E, M32R/I core only */ +#define SPR_CR6 PT_BPC +#define SPR_CR7 +#define SPR_CR8 PT_BBPSW +#define SPR_CR9 +#define SPR_CR10 +#define SPR_CR11 +#define SPR_CR12 +#define SPR_CR13 PT_WR +#define SPR_CR14 PT_BBPC +#define SPR_CR15 + +/* this struct defines the way the registers are stored on the + stack during a system call. */ +struct pt_regs { + /* Saved main processor registers. */ + unsigned long r4; + unsigned long r5; + unsigned long r6; + struct pt_regs *pt_regs; + unsigned long r0; + unsigned long r1; + unsigned long r2; + unsigned long r3; + unsigned long r7; + unsigned long r8; + unsigned long r9; + unsigned long r10; + unsigned long r11; + unsigned long r12; + long syscall_nr; + + /* Saved main processor status and miscellaneous context registers. */ + unsigned long acc0h; + unsigned long acc0l; + unsigned long acc1h; /* ISA_DSP_LEVEL2 only */ + unsigned long acc1l; /* ISA_DSP_LEVEL2 only */ + unsigned long psw; + unsigned long bpc; /* saved PC for TRAP syscalls */ + unsigned long bbpsw; + unsigned long bbpc; + unsigned long spu; /* saved user stack */ + unsigned long fp; + unsigned long lr; /* saved PC for JL syscalls */ + unsigned long spi; /* saved kernel stack */ + unsigned long orig_r0; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 + +#define PTRACE_OLDSETOPTIONS 21 + +/* options set using PTRACE_SETOPTIONS */ +#define PTRACE_O_TRACESYSGOOD 0x00000001 + +#ifdef __KERNEL__ + +#include /* M32R_PSW_BSM, M32R_PSW_BPM */ + +struct task_struct; +extern void init_debug_traps(struct task_struct *); +#define arch_ptrace_attach(child) \ + init_debug_traps(child) + +#if defined(CONFIG_ISA_M32R2) || defined(CONFIG_CHIP_VDEC2) +#define user_mode(regs) ((M32R_PSW_BPM & (regs)->psw) != 0) +#elif defined(CONFIG_ISA_M32R) +#define user_mode(regs) ((M32R_PSW_BSM & (regs)->psw) != 0) +#else +#error unknown isa configuration +#endif + +#define instruction_pointer(regs) ((regs)->bpc) +#define profile_pc(regs) instruction_pointer(regs) + +extern void show_regs(struct pt_regs *); + +extern void withdraw_debug_trap(struct pt_regs *regs); + +#define task_pt_regs(task) \ + ((struct pt_regs *)(task_stack_page(task) + THREAD_SIZE) - 1) + +#endif /* __KERNEL */ + +#endif /* _ASM_M32R_PTRACE_H */ diff --git a/arch/m32r/include/asm/resource.h b/arch/m32r/include/asm/resource.h new file mode 100644 index 0000000..b1ce766 --- /dev/null +++ b/arch/m32r/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_RESOURCE_H +#define _ASM_M32R_RESOURCE_H + +#include + +#endif /* _ASM_M32R_RESOURCE_H */ diff --git a/arch/m32r/include/asm/rtc.h b/arch/m32r/include/asm/rtc.h new file mode 100644 index 0000000..0340633 --- /dev/null +++ b/arch/m32r/include/asm/rtc.h @@ -0,0 +1,65 @@ +#ifndef __RTC_H__ +#define __RTC_H__ + + /* Dallas DS1302 clock/calendar register numbers. */ +# define RTC_SECONDS 0 +# define RTC_MINUTES 1 +# define RTC_HOURS 2 +# define RTC_DAY_OF_MONTH 3 +# define RTC_MONTH 4 +# define RTC_WEEKDAY 5 +# define RTC_YEAR 6 +# define RTC_CONTROL 7 + + /* Bits in CONTROL register. */ +# define RTC_CONTROL_WRITEPROTECT 0x80 +# define RTC_TRICKLECHARGER 8 + + /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */ +# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */ +# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */ +# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */ +# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */ +# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */ +# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */ +# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */ + +#ifdef CONFIG_DS1302 +extern unsigned char ds1302_readreg(int reg); +extern void ds1302_writereg(int reg, unsigned char val); +extern int ds1302_init(void); +# define CMOS_READ(x) ds1302_readreg(x) +# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val) +# define RTC_INIT() ds1302_init() +#else + /* No RTC configured so we shouldn't try to access any. */ +# define CMOS_READ(x) 42 +# define CMOS_WRITE(x,y) +# define RTC_INIT() (-1) +#endif + +/* + * The struct used to pass data via the following ioctl. Similar to the + * struct tm in , but it needs to be here so that the kernel + * source is self contained, allowing cross-compiles, etc. etc. + */ +struct rtc_time { + int tm_sec; + int tm_min; + int tm_hour; + int tm_mday; + int tm_mon; + int tm_year; + int tm_wday; + int tm_yday; + int tm_isdst; +}; + +/* ioctl() calls that are permitted to the /dev/rtc interface. */ +#define RTC_MAGIC 'p' +#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) /* Read RTC time. */ +#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) /* Set RTC time. */ +#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int) +#define RTC_MAX_IOCTL 0x0b + +#endif /* __RTC_H__ */ diff --git a/arch/m32r/include/asm/s1d13806.h b/arch/m32r/include/asm/s1d13806.h new file mode 100644 index 0000000..248d36a --- /dev/null +++ b/arch/m32r/include/asm/s1d13806.h @@ -0,0 +1,199 @@ +//---------------------------------------------------------------------------- +// +// File generated by S1D13806CFG.EXE +// +// Copyright (c) 2000,2001 Epson Research and Development, Inc. +// All rights reserved. +// +//---------------------------------------------------------------------------- + +// Panel: (active) 640x480 77Hz STN Single 8-bit (PCLK=CLKI=25.175MHz) +// Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=33.333MHz) + +#define SWIVEL_VIEW 0 /* 0:none, 1:90 not completed */ + +static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = { + + {0x0001,0x00}, // Miscellaneous Register + {0x01FC,0x00}, // Display Mode Register +#if defined(CONFIG_PLAT_MAPPI) + {0x0004,0x00}, // General IO Pins Configuration Register 0 + {0x0005,0x00}, // General IO Pins Configuration Register 1 + {0x0008,0x00}, // General IO Pins Control Register 0 + {0x0009,0x00}, // General IO Pins Control Register 1 + {0x0010,0x00}, // Memory Clock Configuration Register + {0x0014,0x00}, // LCD Pixel Clock Configuration Register + {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register + {0x001C,0x00}, // MediaPlug Clock Configuration Register +/* + * .. 10MHz: 0x00 + * .. 30MHz: 0x01 + * 30MHz ..: 0x02 + */ + {0x001E,0x02}, // CPU To Memory Wait State Select Register + {0x0021,0x02}, // DRAM Refresh Rate Register + {0x002A,0x11}, // DRAM Timings Control Register 0 + {0x002B,0x13}, // DRAM Timings Control Register 1 + {0x0020,0x80}, // Memory Configuration Register + {0x0030,0x25}, // Panel Type Register + {0x0031,0x00}, // MOD Rate Register + {0x0032,0x4F}, // LCD Horizontal Display Width Register + {0x0034,0x12}, // LCD Horizontal Non-Display Period Register + {0x0035,0x01}, // TFT FPLINE Start Position Register + {0x0036,0x0B}, // TFT FPLINE Pulse Width Register + {0x0038,0xDF}, // LCD Vertical Display Height Register 0 + {0x0039,0x01}, // LCD Vertical Display Height Register 1 + {0x003A,0x2C}, // LCD Vertical Non-Display Period Register + {0x003B,0x0A}, // TFT FPFRAME Start Position Register + {0x003C,0x01}, // TFT FPFRAME Pulse Width Register + + {0x0041,0x00}, // LCD Miscellaneous Register + {0x0042,0x00}, // LCD Display Start Address Register 0 + {0x0043,0x00}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + +#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) + {0x0004,0x07}, // GPIO[0:7] direction + {0x0005,0x00}, // GPIO[8:12] direction + {0x0008,0x00}, // GPIO[0:7] data + {0x0009,0x00}, // GPIO[8:12] data + {0x0008,0x04}, // LCD panel Vcc on + {0x0008,0x05}, // LCD panel reset + {0x0010,0x01}, // Memory Clock Configuration Register + {0x0014,0x30}, // LCD Pixel Clock Configuration Register (CLKI 22MHz/4) + {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register + {0x001C,0x00}, // MediaPlug Clock Configuration Register(10MHz) + {0x001E,0x00}, // CPU To Memory Wait State Select Register + {0x0020,0x80}, // Memory Configuration Register + {0x0021,0x03}, // DRAM Refresh Rate Register + {0x002A,0x00}, // DRAM Timings Control Register 0 + {0x002B,0x01}, // DRAM Timings Control Register 1 + {0x0030,0x25}, // Panel Type Register + {0x0031,0x00}, // MOD Rate Register + {0x0032,0x1d}, // LCD Horizontal Display Width Register + {0x0034,0x05}, // LCD Horizontal Non-Display Period Register + {0x0035,0x01}, // TFT FPLINE Start Position Register + {0x0036,0x01}, // TFT FPLINE Pulse Width Register + {0x0038,0x3F}, // LCD Vertical Display Height Register 0 + {0x0039,0x01}, // LCD Vertical Display Height Register 1 + {0x003A,0x0b}, // LCD Vertical Non-Display Period Register + {0x003B,0x07}, // TFT FPFRAME Start Position Register + {0x003C,0x02}, // TFT FPFRAME Pulse Width Register + + {0x0041,0x00}, // LCD Miscellaneous Register +#if (SWIVEL_VIEW == 0) + {0x0042,0x00}, // LCD Display Start Address Register 0 + {0x0043,0x00}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + +#elif (SWIVEL_VIEW == 1) + // 1024 - W(320) = 0x2C0 + {0x0042,0xC0}, // LCD Display Start Address Register 0 + {0x0043,0x02}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + // 1024 + {0x0046,0x00}, // LCD Memory Address Offset Register 0 + {0x0047,0x02}, // LCD Memory Address Offset Register 1 +#else +#error unsupported SWIVEL_VIEW mode +#endif +#else +#error no platform configuration +#endif /* CONFIG_PLAT_XXX */ + + {0x0048,0x00}, // LCD Pixel Panning Register + {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register + {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register + {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register + {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register + {0x0053,0x01}, // CRT/TV HRTC Start Position Register + {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register + {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0 + {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1 + {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register + {0x0059,0x09}, // CRT/TV VRTC Start Position Register + {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register + {0x005B,0x10}, // TV Output Control Register + + {0x0062,0x00}, // CRT/TV Display Start Address Register 0 + {0x0063,0x00}, // CRT/TV Display Start Address Register 1 + {0x0064,0x00}, // CRT/TV Display Start Address Register 2 + + {0x0068,0x00}, // CRT/TV Pixel Panning Register + {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register + {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register + {0x0070,0x00}, // LCD Ink/Cursor Control Register + {0x0071,0x01}, // LCD Ink/Cursor Start Address Register + {0x0072,0x00}, // LCD Cursor X Position Register 0 + {0x0073,0x00}, // LCD Cursor X Position Register 1 + {0x0074,0x00}, // LCD Cursor Y Position Register 0 + {0x0075,0x00}, // LCD Cursor Y Position Register 1 + {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register + {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register + {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register + {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register + {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register + {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register + {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register + {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register + {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register + {0x0082,0x00}, // CRT/TV Cursor X Position Register 0 + {0x0083,0x00}, // CRT/TV Cursor X Position Register 1 + {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0 + {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1 + {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register + {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register + {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register + {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register + {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register + {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register + {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register + {0x0100,0x00}, // BitBlt Control Register 0 + {0x0101,0x00}, // BitBlt Control Register 1 + {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register + {0x0103,0x00}, // BitBlt Operation Register + {0x0104,0x00}, // BitBlt Source Start Address Register 0 + {0x0105,0x00}, // BitBlt Source Start Address Register 1 + {0x0106,0x00}, // BitBlt Source Start Address Register 2 + {0x0108,0x00}, // BitBlt Destination Start Address Register 0 + {0x0109,0x00}, // BitBlt Destination Start Address Register 1 + {0x010A,0x00}, // BitBlt Destination Start Address Register 2 + {0x010C,0x00}, // BitBlt Memory Address Offset Register 0 + {0x010D,0x00}, // BitBlt Memory Address Offset Register 1 + {0x0110,0x00}, // BitBlt Width Register 0 + {0x0111,0x00}, // BitBlt Width Register 1 + {0x0112,0x00}, // BitBlt Height Register 0 + {0x0113,0x00}, // BitBlt Height Register 1 + {0x0114,0x00}, // BitBlt Background Color Register 0 + {0x0115,0x00}, // BitBlt Background Color Register 1 + {0x0118,0x00}, // BitBlt Foreground Color Register 0 + {0x0119,0x00}, // BitBlt Foreground Color Register 1 + {0x01E0,0x00}, // Look-Up Table Mode Register + {0x01E2,0x00}, // Look-Up Table Address Register + {0x01F0,0x10}, // Power Save Configuration Register + {0x01F1,0x00}, // Power Save Status Register + {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register +#if (SWIVEL_VIEW == 0) + {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT) +#elif (SWIVEL_VIEW == 1) + {0x01FC,0x41}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT) +#else +#error unsupported SWIVEL_VIEW mode +#endif /* SWIVEL_VIEW */ + +#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) + {0x0008,0x07}, // LCD panel Vdd & Vg on +#endif + + {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp) +#if defined(CONFIG_PLAT_MAPPI) + {0x0046,0x80}, // LCD Memory Address Offset Register 0 + {0x0047,0x02}, // LCD Memory Address Offset Register 1 +#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) + {0x0046,0xf0}, // LCD Memory Address Offset Register 0 + {0x0047,0x00}, // LCD Memory Address Offset Register 1 +#endif + {0x0060,0x05}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp) + {0x0066,0x80}, // CRT/TV Memory Address Offset Register 0 // takeo + {0x0067,0x02}, // CRT/TV Memory Address Offset Register 1 +}; diff --git a/arch/m32r/include/asm/scatterlist.h b/arch/m32r/include/asm/scatterlist.h new file mode 100644 index 0000000..1ed372c --- /dev/null +++ b/arch/m32r/include/asm/scatterlist.h @@ -0,0 +1,21 @@ +#ifndef _ASM_M32R_SCATTERLIST_H +#define _ASM_M32R_SCATTERLIST_H + +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + char * address; /* Location data is to be transferred to, NULL for + * highmem page */ + unsigned long page_link; + unsigned int offset;/* for highmem, page offset */ + + dma_addr_t dma_address; + unsigned int length; +}; + +#define ISA_DMA_THRESHOLD (0x1fffffff) + +#endif /* _ASM_M32R_SCATTERLIST_H */ diff --git a/arch/m32r/include/asm/sections.h b/arch/m32r/include/asm/sections.h new file mode 100644 index 0000000..5e5d21c --- /dev/null +++ b/arch/m32r/include/asm/sections.h @@ -0,0 +1,7 @@ +#ifndef _M32R_SECTIONS_H +#define _M32R_SECTIONS_H + +/* nothing to see, move along */ +#include + +#endif /* _M32R_SECTIONS_H */ diff --git a/arch/m32r/include/asm/segment.h b/arch/m32r/include/asm/segment.h new file mode 100644 index 0000000..42b11ae --- /dev/null +++ b/arch/m32r/include/asm/segment.h @@ -0,0 +1,10 @@ +#ifndef _ASM_M32R_SEGMENT_H +#define _ASM_M32R_SEGMENT_H + +#define __KERNEL_CS 0x10 +#define __KERNEL_DS 0x18 + +#define __USER_CS 0x23 +#define __USER_DS 0x2B + +#endif /* _ASM_M32R_SEGMENT_H */ diff --git a/arch/m32r/include/asm/sembuf.h b/arch/m32r/include/asm/sembuf.h new file mode 100644 index 0000000..c9873d6 --- /dev/null +++ b/arch/m32r/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _ASM_M32R_SEMBUF_H +#define _ASM_M32R_SEMBUF_H + +/* + * The semid64_ds structure for m32r architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_M32R_SEMBUF_H */ diff --git a/arch/m32r/include/asm/serial.h b/arch/m32r/include/asm/serial.h new file mode 100644 index 0000000..5ac244c --- /dev/null +++ b/arch/m32r/include/asm/serial.h @@ -0,0 +1,9 @@ +#ifndef _ASM_M32R_SERIAL_H +#define _ASM_M32R_SERIAL_H + +/* include/asm-m32r/serial.h */ + + +#define BASE_BAUD 115200 + +#endif /* _ASM_M32R_SERIAL_H */ diff --git a/arch/m32r/include/asm/setup.h b/arch/m32r/include/asm/setup.h new file mode 100644 index 0000000..c637ab9 --- /dev/null +++ b/arch/m32r/include/asm/setup.h @@ -0,0 +1,38 @@ +#ifndef _ASM_M32R_SETUP_H +#define _ASM_M32R_SETUP_H + +/* + * This is set up by the setup-routine at boot-time + */ + +#define COMMAND_LINE_SIZE 512 + +#ifdef __KERNEL__ + +#define PARAM ((unsigned char *)empty_zero_page) + +#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) +#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) +#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) +#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) +#define INITRD_START (*(unsigned long *) (PARAM+0x010)) +#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) + +#define M32R_CPUCLK (*(unsigned long *) (PARAM+0x018)) +#define M32R_BUSCLK (*(unsigned long *) (PARAM+0x01c)) +#define M32R_TIMER_DIVIDE (*(unsigned long *) (PARAM+0x020)) + +#define COMMAND_LINE ((char *) (PARAM+0x100)) + +#define SCREEN_INFO (*(struct screen_info *) (PARAM+0x200)) + +#define RAMDISK_IMAGE_START_MASK (0x07FF) +#define RAMDISK_PROMPT_FLAG (0x8000) +#define RAMDISK_LOAD_FLAG (0x4000) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_SETUP_H */ diff --git a/arch/m32r/include/asm/shmbuf.h b/arch/m32r/include/asm/shmbuf.h new file mode 100644 index 0000000..b0cdf0a --- /dev/null +++ b/arch/m32r/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _ASM_M32R_SHMBUF_H +#define _ASM_M32R_SHMBUF_H + +/* + * The shmid64_ds structure for M32R architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_M32R_SHMBUF_H */ diff --git a/arch/m32r/include/asm/shmparam.h b/arch/m32r/include/asm/shmparam.h new file mode 100644 index 0000000..35986d8 --- /dev/null +++ b/arch/m32r/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_SHMPARAM_H +#define _ASM_M32R_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_M32R_SHMPARAM_H */ diff --git a/arch/m32r/include/asm/sigcontext.h b/arch/m32r/include/asm/sigcontext.h new file mode 100644 index 0000000..da4a9c3 --- /dev/null +++ b/arch/m32r/include/asm/sigcontext.h @@ -0,0 +1,39 @@ +#ifndef _ASM_M32R_SIGCONTEXT_H +#define _ASM_M32R_SIGCONTEXT_H + +struct sigcontext { + /* CPU registers */ + /* Saved main processor registers. */ + unsigned long sc_r4; + unsigned long sc_r5; + unsigned long sc_r6; + struct pt_regs *sc_pt_regs; + unsigned long sc_r0; + unsigned long sc_r1; + unsigned long sc_r2; + unsigned long sc_r3; + unsigned long sc_r7; + unsigned long sc_r8; + unsigned long sc_r9; + unsigned long sc_r10; + unsigned long sc_r11; + unsigned long sc_r12; + + /* Saved main processor status and miscellaneous context registers. */ + unsigned long sc_acc0h; + unsigned long sc_acc0l; + unsigned long sc_acc1h; /* ISA_DSP_LEVEL2 only */ + unsigned long sc_acc1l; /* ISA_DSP_LEVEL2 only */ + unsigned long sc_psw; + unsigned long sc_bpc; /* saved PC for TRAP syscalls */ + unsigned long sc_bbpsw; + unsigned long sc_bbpc; + unsigned long sc_spu; /* saved user stack */ + unsigned long sc_fp; + unsigned long sc_lr; /* saved PC for JL syscalls */ + unsigned long sc_spi; /* saved kernel stack */ + + unsigned long oldmask; +}; + +#endif /* _ASM_M32R_SIGCONTEXT_H */ diff --git a/arch/m32r/include/asm/siginfo.h b/arch/m32r/include/asm/siginfo.h new file mode 100644 index 0000000..7d9cd9e --- /dev/null +++ b/arch/m32r/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef _M32R_SIGINFO_H +#define _M32R_SIGINFO_H + +#include + +#endif /* _M32R_SIGINFO_H */ diff --git a/arch/m32r/include/asm/signal.h b/arch/m32r/include/asm/signal.h new file mode 100644 index 0000000..1a60706 --- /dev/null +++ b/arch/m32r/include/asm/signal.h @@ -0,0 +1,166 @@ +#ifndef _ASM_M32R_SIGNAL_H +#define _ASM_M32R_SIGNAL_H + +#include +#include +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001u +#define SA_NOCLDWAIT 0x00000002u +#define SA_SIGINFO 0x00000004u +#define SA_ONSTACK 0x08000000u +#define SA_RESTART 0x10000000u +#define SA_NODEFER 0x40000000u +#define SA_RESETHAND 0x80000000u + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include + +#undef __HAVE_ARCH_SIG_BITOPS + +struct pt_regs; +extern int do_signal(struct pt_regs *regs, sigset_t *oldset); + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_SIGNAL_H */ diff --git a/arch/m32r/include/asm/smp.h b/arch/m32r/include/asm/smp.h new file mode 100644 index 0000000..b96a6d2 --- /dev/null +++ b/arch/m32r/include/asm/smp.h @@ -0,0 +1,119 @@ +#ifndef _ASM_M32R_SMP_H +#define _ASM_M32R_SMP_H + +#ifdef CONFIG_SMP +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include + +#define PHYSID_ARRAY_SIZE 1 + +struct physid_mask +{ + unsigned long mask[PHYSID_ARRAY_SIZE]; +}; + +typedef struct physid_mask physid_mask_t; + +#define physid_set(physid, map) set_bit(physid, (map).mask) +#define physid_clear(physid, map) clear_bit(physid, (map).mask) +#define physid_isset(physid, map) test_bit(physid, (map).mask) +#define physid_test_and_set(physid, map) test_and_set_bit(physid, (map).mask) + +#define physids_and(dst, src1, src2) bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS) +#define physids_or(dst, src1, src2) bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS) +#define physids_clear(map) bitmap_zero((map).mask, MAX_APICS) +#define physids_complement(dst, src) bitmap_complement((dst).mask,(src).mask, MAX_APICS) +#define physids_empty(map) bitmap_empty((map).mask, MAX_APICS) +#define physids_equal(map1, map2) bitmap_equal((map1).mask, (map2).mask, MAX_APICS) +#define physids_weight(map) bitmap_weight((map).mask, MAX_APICS) +#define physids_shift_right(d, s, n) bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS) +#define physids_shift_left(d, s, n) bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS) +#define physids_coerce(map) ((map).mask[0]) + +#define physids_promote(physids) \ + ({ \ + physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ + __physid_mask.mask[0] = physids; \ + __physid_mask; \ + }) + +#define physid_mask_of_physid(physid) \ + ({ \ + physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ + physid_set(physid, __physid_mask); \ + __physid_mask; \ + }) + +#define PHYSID_MASK_ALL { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} } +#define PHYSID_MASK_NONE { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} } + +extern physid_mask_t phys_cpu_present_map; + +/* + * Some lowlevel functions might want to know about + * the real CPU ID <-> CPU # mapping. + */ +extern volatile int cpu_2_physid[NR_CPUS]; +#define cpu_to_physid(cpu_id) cpu_2_physid[cpu_id] + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +extern cpumask_t cpu_callout_map; + +static __inline__ int hard_smp_processor_id(void) +{ + return (int)*(volatile long *)M32R_CPUID_PORTL; +} + +static __inline__ int cpu_logical_map(int cpu) +{ + return cpu; +} + +static __inline__ int cpu_number_map(int cpu) +{ + return cpu; +} + +static __inline__ unsigned int num_booting_cpus(void) +{ + return cpus_weight(cpu_callout_map); +} + +extern void smp_send_timer(void); +extern unsigned long send_IPI_mask_phys(cpumask_t, int, int); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#endif /* not __ASSEMBLY__ */ + +#define NO_PROC_ID (0xff) /* No processor magic marker */ + +#define PROC_CHANGE_PENALTY (15) /* Schedule penalty */ + +/* + * M32R-mp IPI + */ +#define RESCHEDULE_IPI (M32R_IRQ_IPI0-M32R_IRQ_IPI0) +#define INVALIDATE_TLB_IPI (M32R_IRQ_IPI1-M32R_IRQ_IPI0) +#define CALL_FUNCTION_IPI (M32R_IRQ_IPI2-M32R_IRQ_IPI0) +#define LOCAL_TIMER_IPI (M32R_IRQ_IPI3-M32R_IRQ_IPI0) +#define INVALIDATE_CACHE_IPI (M32R_IRQ_IPI4-M32R_IRQ_IPI0) +#define CPU_BOOT_IPI (M32R_IRQ_IPI5-M32R_IRQ_IPI0) +#define CALL_FUNC_SINGLE_IPI (M32R_IRQ_IPI6-M32R_IRQ_IPI0) + +#define IPI_SHIFT (0) +#define NR_IPIS (8) + +#else /* CONFIG_SMP */ + +#define hard_smp_processor_id() 0 + +#endif /* CONFIG_SMP */ + +#endif /* _ASM_M32R_SMP_H */ diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h new file mode 100644 index 0000000..be7ed58 --- /dev/null +++ b/arch/m32r/include/asm/socket.h @@ -0,0 +1,60 @@ +#ifndef _ASM_M32R_SOCKET_H +#define _ASM_M32R_SOCKET_H + +#include + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#endif /* _ASM_M32R_SOCKET_H */ diff --git a/arch/m32r/include/asm/sockios.h b/arch/m32r/include/asm/sockios.h new file mode 100644 index 0000000..6c1fb9b --- /dev/null +++ b/arch/m32r/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef _ASM_M32R_SOCKIOS_H +#define _ASM_M32R_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_M32R_SOCKIOS_H */ diff --git a/arch/m32r/include/asm/spinlock.h b/arch/m32r/include/asm/spinlock.h new file mode 100644 index 0000000..dded923 --- /dev/null +++ b/arch/m32r/include/asm/spinlock.h @@ -0,0 +1,326 @@ +#ifndef _ASM_M32R_SPINLOCK_H +#define _ASM_M32R_SPINLOCK_H + +/* + * linux/include/asm-m32r/spinlock.h + * + * M32R version: + * Copyright (C) 2001, 2002 Hitoshi Yamamoto + * Copyright (C) 2004 Hirokazu Takata + */ + +#include +#include +#include + +/* + * Your basic SMP spinlocks, allowing only a single CPU anywhere + * + * (the type definitions are in asm/spinlock_types.h) + * + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ + +#define __raw_spin_is_locked(x) (*(volatile int *)(&(x)->slock) <= 0) +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_unlock_wait(x) \ + do { cpu_relax(); } while (__raw_spin_is_locked(x)) + +/** + * __raw_spin_trylock - Try spin lock and return a result + * @lock: Pointer to the lock variable + * + * __raw_spin_trylock() tries to get the lock and returns a result. + * On the m32r, the result value is 1 (= Success) or 0 (= Failure). + */ +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + int oldval; + unsigned long tmp1, tmp2; + + /* + * lock->slock : =1 : unlock + * : <=0 : lock + * { + * oldval = lock->slock; <--+ need atomic operation + * lock->slock = 0; <--+ + * } + */ + __asm__ __volatile__ ( + "# __raw_spin_trylock \n\t" + "ldi %1, #0; \n\t" + "mvfc %2, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%3") + "lock %0, @%3; \n\t" + "unlock %1, @%3; \n\t" + "mvtc %2, psw; \n\t" + : "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2) + : "r" (&lock->slock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + + return (oldval > 0); +} + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + unsigned long tmp0, tmp1; + + /* + * lock->slock : =1 : unlock + * : <=0 : lock + * + * for ( ; ; ) { + * lock->slock -= 1; <-- need atomic operation + * if (lock->slock == 0) break; + * for ( ; lock->slock <= 0 ; ); + * } + */ + __asm__ __volatile__ ( + "# __raw_spin_lock \n\t" + ".fillinsn \n" + "1: \n\t" + "mvfc %1, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%2") + "lock %0, @%2; \n\t" + "addi %0, #-1; \n\t" + "unlock %0, @%2; \n\t" + "mvtc %1, psw; \n\t" + "bltz %0, 2f; \n\t" + LOCK_SECTION_START(".balign 4 \n\t") + ".fillinsn \n" + "2: \n\t" + "ld %0, @%2; \n\t" + "bgtz %0, 1b; \n\t" + "bra 2b; \n\t" + LOCK_SECTION_END + : "=&r" (tmp0), "=&r" (tmp1) + : "r" (&lock->slock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + mb(); + lock->slock = 1; +} + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + * + * On x86, we implement read-write locks as a 32-bit counter + * with the high bit (sign) being the "contended" bit. + * + * The inline assembly is non-obvious. Think about it. + * + * Changed to use the same technique as rw semaphores. See + * semaphore.h for details. -ben + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(x) ((int)(x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned long tmp0, tmp1; + + /* + * rw->lock : >0 : unlock + * : <=0 : lock + * + * for ( ; ; ) { + * rw->lock -= 1; <-- need atomic operation + * if (rw->lock >= 0) break; + * rw->lock += 1; <-- need atomic operation + * for ( ; rw->lock <= 0 ; ); + * } + */ + __asm__ __volatile__ ( + "# read_lock \n\t" + ".fillinsn \n" + "1: \n\t" + "mvfc %1, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%2") + "lock %0, @%2; \n\t" + "addi %0, #-1; \n\t" + "unlock %0, @%2; \n\t" + "mvtc %1, psw; \n\t" + "bltz %0, 2f; \n\t" + LOCK_SECTION_START(".balign 4 \n\t") + ".fillinsn \n" + "2: \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%2") + "lock %0, @%2; \n\t" + "addi %0, #1; \n\t" + "unlock %0, @%2; \n\t" + "mvtc %1, psw; \n\t" + ".fillinsn \n" + "3: \n\t" + "ld %0, @%2; \n\t" + "bgtz %0, 1b; \n\t" + "bra 3b; \n\t" + LOCK_SECTION_END + : "=&r" (tmp0), "=&r" (tmp1) + : "r" (&rw->lock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + unsigned long tmp0, tmp1, tmp2; + + /* + * rw->lock : =RW_LOCK_BIAS_STR : unlock + * : !=RW_LOCK_BIAS_STR : lock + * + * for ( ; ; ) { + * rw->lock -= RW_LOCK_BIAS_STR; <-- need atomic operation + * if (rw->lock == 0) break; + * rw->lock += RW_LOCK_BIAS_STR; <-- need atomic operation + * for ( ; rw->lock != RW_LOCK_BIAS_STR ; ) ; + * } + */ + __asm__ __volatile__ ( + "# write_lock \n\t" + "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t" + "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t" + ".fillinsn \n" + "1: \n\t" + "mvfc %2, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r7", "%3") + "lock %0, @%3; \n\t" + "sub %0, %1; \n\t" + "unlock %0, @%3; \n\t" + "mvtc %2, psw; \n\t" + "bnez %0, 2f; \n\t" + LOCK_SECTION_START(".balign 4 \n\t") + ".fillinsn \n" + "2: \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r7", "%3") + "lock %0, @%3; \n\t" + "add %0, %1; \n\t" + "unlock %0, @%3; \n\t" + "mvtc %2, psw; \n\t" + ".fillinsn \n" + "3: \n\t" + "ld %0, @%3; \n\t" + "beq %0, %1, 1b; \n\t" + "bra 3b; \n\t" + LOCK_SECTION_END + : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2) + : "r" (&rw->lock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r7" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned long tmp0, tmp1; + + __asm__ __volatile__ ( + "# read_unlock \n\t" + "mvfc %1, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r6", "%2") + "lock %0, @%2; \n\t" + "addi %0, #1; \n\t" + "unlock %0, @%2; \n\t" + "mvtc %1, psw; \n\t" + : "=&r" (tmp0), "=&r" (tmp1) + : "r" (&rw->lock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r6" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + unsigned long tmp0, tmp1, tmp2; + + __asm__ __volatile__ ( + "# write_unlock \n\t" + "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t" + "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t" + "mvfc %2, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + DCACHE_CLEAR("%0", "r7", "%3") + "lock %0, @%3; \n\t" + "add %0, %1; \n\t" + "unlock %0, @%3; \n\t" + "mvtc %2, psw; \n\t" + : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2) + : "r" (&rw->lock) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r7" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); +} + +static inline int __raw_read_trylock(raw_rwlock_t *lock) +{ + atomic_t *count = (atomic_t*)lock; + if (atomic_dec_return(count) >= 0) + return 1; + atomic_inc(count); + return 0; +} + +static inline int __raw_write_trylock(raw_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + if (atomic_sub_and_test(RW_LOCK_BIAS, count)) + return 1; + atomic_add(RW_LOCK_BIAS, count); + return 0; +} + +#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock) +#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* _ASM_M32R_SPINLOCK_H */ diff --git a/arch/m32r/include/asm/spinlock_types.h b/arch/m32r/include/asm/spinlock_types.h new file mode 100644 index 0000000..83f5210 --- /dev/null +++ b/arch/m32r/include/asm/spinlock_types.h @@ -0,0 +1,23 @@ +#ifndef _ASM_M32R_SPINLOCK_TYPES_H +#define _ASM_M32R_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile int slock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 1 } + +typedef struct { + volatile int lock; +} raw_rwlock_t; + +#define RW_LOCK_BIAS 0x01000000 +#define RW_LOCK_BIAS_STR "0x01000000" + +#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif /* _ASM_M32R_SPINLOCK_TYPES_H */ diff --git a/arch/m32r/include/asm/stat.h b/arch/m32r/include/asm/stat.h new file mode 100644 index 0000000..da4518f --- /dev/null +++ b/arch/m32r/include/asm/stat.h @@ -0,0 +1,87 @@ +#ifndef _ASM_M32R_STAT_H +#define _ASM_M32R_STAT_H + +#include + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#define STAT_HAVE_NSEC 1 + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; +#define STAT64_HAS_BROKEN_ST_INO + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + +#if defined(__BIG_ENDIAN) + unsigned long __pad4; /* future possible st_blocks high bits */ + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ +#elif defined(__LITTLE_ENDIAN) + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ +#else +#error no endian defined +#endif + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif /* _ASM_M32R_STAT_H */ diff --git a/arch/m32r/include/asm/statfs.h b/arch/m32r/include/asm/statfs.h new file mode 100644 index 0000000..6eb4c60 --- /dev/null +++ b/arch/m32r/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_STATFS_H +#define _ASM_M32R_STATFS_H + +#include + +#endif /* _ASM_M32R_STATFS_H */ diff --git a/arch/m32r/include/asm/string.h b/arch/m32r/include/asm/string.h new file mode 100644 index 0000000..e61e2b0 --- /dev/null +++ b/arch/m32r/include/asm/string.h @@ -0,0 +1,13 @@ +#ifndef _ASM_M32R_STRING_H +#define _ASM_M32R_STRING_H + +#define __HAVE_ARCH_STRLEN +extern size_t strlen(const char * s); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#endif /* _ASM_M32R_STRING_H */ diff --git a/arch/m32r/include/asm/syscall.h b/arch/m32r/include/asm/syscall.h new file mode 100644 index 0000000..25f316f --- /dev/null +++ b/arch/m32r/include/asm/syscall.h @@ -0,0 +1,8 @@ +#ifndef _ASM_M32R_SYSCALL_H +#define _ASM_M32R_SYSCALL_H + +/* Definitions for the system call vector. */ +#define SYSCALL_VECTOR "2" +#define SYSCALL_VECTOR_ADDRESS "0xa0" + +#endif /* _ASM_M32R_SYSCALL_H */ diff --git a/arch/m32r/include/asm/system.h b/arch/m32r/include/asm/system.h new file mode 100644 index 0000000..c980f5b --- /dev/null +++ b/arch/m32r/include/asm/system.h @@ -0,0 +1,431 @@ +#ifndef _ASM_M32R_SYSTEM_H +#define _ASM_M32R_SYSTEM_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto + * Copyright (C) 2004, 2006 Hirokazu Takata + */ + +#include +#include + +#ifdef __KERNEL__ + +/* + * switch_to(prev, next) should switch from task `prev' to `next' + * `prev' will never be the same as `next'. + * + * `next' and `prev' should be struct task_struct, but it isn't always defined + */ + +#if defined(CONFIG_FRAME_POINTER) || \ + !defined(CONFIG_SCHED_OMIT_FRAME_POINTER) +#define M32R_PUSH_FP " push fp\n" +#define M32R_POP_FP " pop fp\n" +#else +#define M32R_PUSH_FP "" +#define M32R_POP_FP "" +#endif + +#define switch_to(prev, next, last) do { \ + __asm__ __volatile__ ( \ + " seth lr, #high(1f) \n" \ + " or3 lr, lr, #low(1f) \n" \ + " st lr, @%4 ; store old LR \n" \ + " ld lr, @%5 ; load new LR \n" \ + M32R_PUSH_FP \ + " st sp, @%2 ; store old SP \n" \ + " ld sp, @%3 ; load new SP \n" \ + " push %1 ; store `prev' on new stack \n" \ + " jmp lr \n" \ + " .fillinsn \n" \ + "1: \n" \ + " pop %0 ; restore `__last' from new stack \n" \ + M32R_POP_FP \ + : "=r" (last) \ + : "0" (prev), \ + "r" (&(prev->thread.sp)), "r" (&(next->thread.sp)), \ + "r" (&(prev->thread.lr)), "r" (&(next->thread.lr)) \ + : "memory", "lr" \ + ); \ +} while(0) + +/* Interrupt Control */ +#if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104) +#define local_irq_enable() \ + __asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory") +#define local_irq_disable() \ + __asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory") +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ +static inline void local_irq_enable(void) +{ + unsigned long tmpreg; + __asm__ __volatile__( + "mvfc %0, psw; \n\t" + "or3 %0, %0, #0x0040; \n\t" + "mvtc %0, psw; \n\t" + : "=&r" (tmpreg) : : "cbit", "memory"); +} + +static inline void local_irq_disable(void) +{ + unsigned long tmpreg0, tmpreg1; + __asm__ __volatile__( + "ld24 %0, #0 ; Use 32-bit insn. \n\t" + "mvfc %1, psw ; No interrupt can be accepted here. \n\t" + "mvtc %0, psw \n\t" + "and3 %0, %1, #0xffbf \n\t" + "mvtc %0, psw \n\t" + : "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory"); +} +#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + +#define local_save_flags(x) \ + __asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */) + +#define local_irq_restore(x) \ + __asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \ + : "r" (x) : "cbit", "memory") + +#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) +#define local_irq_save(x) \ + __asm__ __volatile__( \ + "mvfc %0, psw; \n\t" \ + "clrpsw #0x40 -> nop; \n\t" \ + : "=r" (x) : /* no input */ : "memory") +#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ +#define local_irq_save(x) \ + ({ \ + unsigned long tmpreg; \ + __asm__ __volatile__( \ + "ld24 %1, #0 \n\t" \ + "mvfc %0, psw \n\t" \ + "mvtc %1, psw \n\t" \ + "and3 %1, %0, #0xffbf \n\t" \ + "mvtc %1, psw \n\t" \ + : "=r" (x), "=&r" (tmpreg) \ + : : "cbit", "memory"); \ + }) +#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ + +#define irqs_disabled() \ + ({ \ + unsigned long flags; \ + local_save_flags(flags); \ + !(flags & 0x40); \ + }) + +#define nop() __asm__ __volatile__ ("nop" : : ) + +#define xchg(ptr, x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) +#define xchg_local(ptr, x) \ + ((__typeof__(*(ptr)))__xchg_local((unsigned long)(x), (ptr), \ + sizeof(*(ptr)))) + +extern void __xchg_called_with_bad_pointer(void); + +#ifdef CONFIG_CHIP_M32700_TS1 +#define DCACHE_CLEAR(reg0, reg1, addr) \ + "seth "reg1", #high(dcache_dummy); \n\t" \ + "or3 "reg1", "reg1", #low(dcache_dummy); \n\t" \ + "lock "reg0", @"reg1"; \n\t" \ + "add3 "reg0", "addr", #0x1000; \n\t" \ + "ld "reg0", @"reg0"; \n\t" \ + "add3 "reg0", "addr", #0x2000; \n\t" \ + "ld "reg0", @"reg0"; \n\t" \ + "unlock "reg0", @"reg1"; \n\t" + /* FIXME: This workaround code cannot handle kernel modules + * correctly under SMP environment. + */ +#else /* CONFIG_CHIP_M32700_TS1 */ +#define DCACHE_CLEAR(reg0, reg1, addr) +#endif /* CONFIG_CHIP_M32700_TS1 */ + +static __always_inline unsigned long +__xchg(unsigned long x, volatile void *ptr, int size) +{ + unsigned long flags; + unsigned long tmp = 0; + + local_irq_save(flags); + + switch (size) { +#ifndef CONFIG_SMP + case 1: + __asm__ __volatile__ ( + "ldb %0, @%2 \n\t" + "stb %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 2: + __asm__ __volatile__ ( + "ldh %0, @%2 \n\t" + "sth %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 4: + __asm__ __volatile__ ( + "ld %0, @%2 \n\t" + "st %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; +#else /* CONFIG_SMP */ + case 4: + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r4", "%2") + "lock %0, @%2; \n\t" + "unlock %1, @%2; \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) + : "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + break; +#endif /* CONFIG_SMP */ + default: + __xchg_called_with_bad_pointer(); + } + + local_irq_restore(flags); + + return (tmp); +} + +static __always_inline unsigned long +__xchg_local(unsigned long x, volatile void *ptr, int size) +{ + unsigned long flags; + unsigned long tmp = 0; + + local_irq_save(flags); + + switch (size) { + case 1: + __asm__ __volatile__ ( + "ldb %0, @%2 \n\t" + "stb %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 2: + __asm__ __volatile__ ( + "ldh %0, @%2 \n\t" + "sth %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + case 4: + __asm__ __volatile__ ( + "ld %0, @%2 \n\t" + "st %1, @%2 \n\t" + : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); + break; + default: + __xchg_called_with_bad_pointer(); + } + + local_irq_restore(flags); + + return (tmp); +} + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long +__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new) +{ + unsigned long flags; + unsigned int retval; + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r4", "%1") + M32R_LOCK" %0, @%1; \n" + " bne %0, %2, 1f; \n" + M32R_UNLOCK" %3, @%1; \n" + " bra 2f; \n" + " .fillinsn \n" + "1:" + M32R_UNLOCK" %0, @%1; \n" + " .fillinsn \n" + "2:" + : "=&r" (retval) + : "r" (p), "r" (old), "r" (new) + : "cbit", "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return retval; +} + +static inline unsigned long +__cmpxchg_local_u32(volatile unsigned int *p, unsigned int old, + unsigned int new) +{ + unsigned long flags; + unsigned int retval; + + local_irq_save(flags); + __asm__ __volatile__ ( + DCACHE_CLEAR("%0", "r4", "%1") + "ld %0, @%1; \n" + " bne %0, %2, 1f; \n" + "st %3, @%1; \n" + " bra 2f; \n" + " .fillinsn \n" + "1:" + "st %0, @%1; \n" + " .fillinsn \n" + "2:" + : "=&r" (retval) + : "r" (p), "r" (old), "r" (new) + : "cbit", "memory" +#ifdef CONFIG_CHIP_M32700_TS1 + , "r4" +#endif /* CONFIG_CHIP_M32700_TS1 */ + ); + local_irq_restore(flags); + + return retval; +} + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +static inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); +#if 0 /* we don't have __cmpxchg_u64 */ + case 8: + return __cmpxchg_u64(ptr, old, new); +#endif /* 0 */ + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) + +#include + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_local_u32(ptr, old, new); + default: + return __cmpxchg_local_generic(ptr, old, new, size); + } + + return old; +} + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* __KERNEL__ */ + +/* + * Memory barrier. + * + * mb() prevents loads and stores being reordered across this point. + * rmb() prevents loads being reordered across this point. + * wmb() prevents stores being reordered across this point. + */ +#define mb() barrier() +#define rmb() mb() +#define wmb() mb() + +/** + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * + * + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like this where there are no data dependencies. + **/ + +#define read_barrier_depends() do { } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while (0) +#define set_mb(var, value) do { var = value; barrier(); } while (0) +#endif + +#define arch_align_stack(x) (x) + +#endif /* _ASM_M32R_SYSTEM_H */ diff --git a/arch/m32r/include/asm/termbits.h b/arch/m32r/include/asm/termbits.h new file mode 100644 index 0000000..bc10400 --- /dev/null +++ b/arch/m32r/include/asm/termbits.h @@ -0,0 +1,199 @@ +#ifndef _ASM_M32R_TERMBITS_H +#define _ASM_M32R_TERMBITS_H + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /** input baud rate */ +#define CTVB 004000000000 /* VisioBraille Terminal flow control */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_M32R_TERMBITS_H */ diff --git a/arch/m32r/include/asm/termios.h b/arch/m32r/include/asm/termios.h new file mode 100644 index 0000000..93ce79f --- /dev/null +++ b/arch/m32r/include/asm/termios.h @@ -0,0 +1,91 @@ +#ifndef _M32R_TERMIOS_H +#define _M32R_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ +#include + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* _M32R_TERMIOS_H */ diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h new file mode 100644 index 0000000..8589d46 --- /dev/null +++ b/arch/m32r/include/asm/thread_info.h @@ -0,0 +1,184 @@ +#ifndef _ASM_M32R_THREAD_INFO_H +#define _ASM_M32R_THREAD_INFO_H + +/* thread_info.h: m32r low-level thread information + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + * Copyright (C) 2004 Hirokazu Takata + */ + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include +#endif + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants must also be changed + */ +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long status; /* thread-synchronous flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF for user-thread + 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + + __u8 supervisor_stack[0]; +}; + +#else /* !__ASSEMBLY__ */ + +/* offsets into the thread_info struct for assembly code access */ +#define TI_TASK 0x00000000 +#define TI_EXEC_DOMAIN 0x00000004 +#define TI_FLAGS 0x00000008 +#define TI_STATUS 0x0000000C +#define TI_CPU 0x00000010 +#define TI_PRE_COUNT 0x00000014 +#define TI_ADDR_LIMIT 0x00000018 +#define TI_RESTART_BLOCK 0x000001C + +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +#define THREAD_SIZE (2*PAGE_SIZE) + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + + __asm__ __volatile__ ( + "ldi %0, #%1 \n\t" + "and %0, sp \n\t" + : "=r" (ti) : "i" (~(THREAD_SIZE - 1)) + ); + + return ti; +} + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) \ + ({ \ + struct thread_info *ret; \ + \ + ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ + \ + ret; \ + }) +#else +#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif + +#define free_thread_info(info) kfree(info) + +#define TI_FLAG_FAULT_CODE_SHIFT 28 + +static inline void set_thread_fault_code(unsigned int val) +{ + struct thread_info *ti = current_thread_info(); + ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT))) + | (val << TI_FLAG_FAULT_CODE_SHIFT); +} + +static inline unsigned int get_thread_fault_code(void) +{ + struct thread_info *ti = current_thread_info(); + return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT; +} + +#else /* !__ASSEMBLY__ */ + +#define THREAD_SIZE 8192 + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg) GET_THREAD_INFO reg + .macro GET_THREAD_INFO reg + ldi \reg, #-THREAD_SIZE + and \reg, sp + .endm + +#endif + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */ +#define TIF_IRET 4 /* return with iret */ +#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ +#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 18 /* OOM killer killed process */ +#define TIF_FREEZE 19 /* is freezing for suspend */ + +#define _TIF_SYSCALL_TRACE (1<mm) + +#include + +#endif /* _M32R_TLB_H */ diff --git a/arch/m32r/include/asm/tlbflush.h b/arch/m32r/include/asm/tlbflush.h new file mode 100644 index 0000000..0ef9530 --- /dev/null +++ b/arch/m32r/include/asm/tlbflush.h @@ -0,0 +1,97 @@ +#ifndef _ASM_M32R_TLBFLUSH_H +#define _ASM_M32R_TLBFLUSH_H + +#include + +/* + * TLB flushing: + * + * - flush_tlb() flushes the current mm struct TLBs + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + */ + +extern void local_flush_tlb_all(void); +extern void local_flush_tlb_mm(struct mm_struct *); +extern void local_flush_tlb_page(struct vm_area_struct *, unsigned long); +extern void local_flush_tlb_range(struct vm_area_struct *, unsigned long, + unsigned long); + +#ifndef CONFIG_SMP +#ifdef CONFIG_MMU +#define flush_tlb_all() local_flush_tlb_all() +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) +#define flush_tlb_range(vma, start, end) \ + local_flush_tlb_range(vma, start, end) +#define flush_tlb_kernel_range(start, end) local_flush_tlb_all() +#else /* CONFIG_MMU */ +#define flush_tlb_all() do { } while (0) +#define flush_tlb_mm(mm) do { } while (0) +#define flush_tlb_page(vma, vmaddr) do { } while (0) +#define flush_tlb_range(vma, start, end) do { } while (0) +#endif /* CONFIG_MMU */ +#else /* CONFIG_SMP */ +extern void smp_flush_tlb_all(void); +extern void smp_flush_tlb_mm(struct mm_struct *); +extern void smp_flush_tlb_page(struct vm_area_struct *, unsigned long); +extern void smp_flush_tlb_range(struct vm_area_struct *, unsigned long, + unsigned long); + +#define flush_tlb_all() smp_flush_tlb_all() +#define flush_tlb_mm(mm) smp_flush_tlb_mm(mm) +#define flush_tlb_page(vma, page) smp_flush_tlb_page(vma, page) +#define flush_tlb_range(vma, start, end) \ + smp_flush_tlb_range(vma, start, end) +#define flush_tlb_kernel_range(start, end) smp_flush_tlb_all() +#endif /* CONFIG_SMP */ + +static __inline__ void __flush_tlb_page(unsigned long page) +{ + unsigned int tmpreg0, tmpreg1, tmpreg2; + + __asm__ __volatile__ ( + "seth %0, #high(%4) \n\t" + "st %3, @(%5, %0) \n\t" + "ldi %1, #1 \n\t" + "st %1, @(%6, %0) \n\t" + "add3 %1, %0, %7 \n\t" + ".fillinsn \n" + "1: \n\t" + "ld %2, @(%6, %0) \n\t" + "bnez %2, 1b \n\t" + "ld %0, @%1+ \n\t" + "ld %1, @%1 \n\t" + "st %2, @+%0 \n\t" + "st %2, @+%1 \n\t" + : "=&r" (tmpreg0), "=&r" (tmpreg1), "=&r" (tmpreg2) + : "r" (page), "i" (MMU_REG_BASE), "i" (MSVA_offset), + "i" (MTOP_offset), "i" (MIDXI_offset) + : "memory" + ); +} + +static __inline__ void __flush_tlb_all(void) +{ + unsigned int tmpreg0, tmpreg1; + + __asm__ __volatile__ ( + "seth %0, #high(%2) \n\t" + "or3 %0, %0, #low(%2) \n\t" + "ldi %1, #0xc \n\t" + "st %1, @%0 \n\t" + ".fillinsn \n" + "1: \n\t" + "ld %1, @%0 \n\t" + "bnez %1, 1b \n\t" + : "=&r" (tmpreg0), "=&r" (tmpreg1) + : "i" (MTOP) : "memory" + ); +} + +extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); + +#endif /* _ASM_M32R_TLBFLUSH_H */ diff --git a/arch/m32r/include/asm/topology.h b/arch/m32r/include/asm/topology.h new file mode 100644 index 0000000..d607eb3 --- /dev/null +++ b/arch/m32r/include/asm/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_TOPOLOGY_H +#define _ASM_M32R_TOPOLOGY_H + +#include + +#endif /* _ASM_M32R_TOPOLOGY_H */ diff --git a/arch/m32r/include/asm/types.h b/arch/m32r/include/asm/types.h new file mode 100644 index 0000000..bc9f7ff --- /dev/null +++ b/arch/m32r/include/asm/types.h @@ -0,0 +1,30 @@ +#ifndef _ASM_M32R_TYPES_H +#define _ASM_M32R_TYPES_H + +#include + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* DMA addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; +typedef u64 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_M32R_TYPES_H */ diff --git a/arch/m32r/include/asm/uaccess.h b/arch/m32r/include/asm/uaccess.h new file mode 100644 index 0000000..1c7047b --- /dev/null +++ b/arch/m32r/include/asm/uaccess.h @@ -0,0 +1,693 @@ +#ifndef _ASM_M32R_UACCESS_H +#define _ASM_M32R_UACCESS_H + +/* + * linux/include/asm-m32r/uaccess.h + * + * M32R version. + * Copyright (C) 2004, 2006 Hirokazu Takata + */ + +/* + * User space memory access functions + */ +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#ifdef CONFIG_MMU + +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#else /* not CONFIG_MMU */ + +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +#define USER_DS MAKE_MM_SEG(0xFFFFFFFF) +#define get_ds() (KERNEL_DS) + +static inline mm_segment_t get_fs(void) +{ + return USER_DS; +} + +static inline void set_fs(mm_segment_t s) +{ +} + +#endif /* not CONFIG_MMU */ + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define __addr_ok(addr) \ + ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) + +/* + * Test whether a block of memory is a valid user space address. + * Returns 0 if the range is valid, nonzero otherwise. + * + * This is equivalent to the following test: + * (u33)addr + (u33)size >= (u33)current->addr_limit.seg + * + * This needs 33-bit arithmetic. We have a carry... + */ +#define __range_ok(addr,size) ({ \ + unsigned long flag, roksum; \ + __chk_user_ptr(addr); \ + asm ( \ + " cmpu %1, %1 ; clear cbit\n" \ + " addx %1, %3 ; set cbit if overflow\n" \ + " subx %0, %0\n" \ + " cmpu %4, %1\n" \ + " subx %0, %5\n" \ + : "=&r" (flag), "=r" (roksum) \ + : "1" (addr), "r" ((int)(size)), \ + "r" (current_thread_info()->addr_limit.seg), "r" (0) \ + : "cbit" ); \ + flag; }) + +/** + * access_ok: - Checks if a user space pointer is valid + * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that + * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe + * to write to a block, it is always safe to read from it. + * @addr: User space pointer to start of block to check + * @size: Size of block to check + * + * Context: User context only. This function may sleep. + * + * Checks if a pointer to a block of memory in user space is valid. + * + * Returns true (nonzero) if the memory block may be valid, false (zero) + * if it is definitely invalid. + * + * Note that, depending on architecture, this function probably just + * checks that the pointer is in the user space range - after calling + * this function, memory access functions may still return -EFAULT. + */ +#ifdef CONFIG_MMU +#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0)) +#else +static inline int access_ok(int type, const void *addr, unsigned long size) +{ + unsigned long val = (unsigned long)addr; + + return ((val >= memory_start) && ((val + size) < memory_end)); +} +#endif /* CONFIG_MMU */ + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +extern int fixup_exception(struct pt_regs *regs); + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the uglyness from the user. + * + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + */ + +/* Careful: we have to cast the result to the type of the pointer for sign + reasons */ +/** + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user(x,ptr) \ + __get_user_check((x),(ptr),sizeof(*(ptr))) + +/** + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user(x,ptr) \ + __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) + +/** + * __get_user: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user(x,ptr) \ + __get_user_nocheck((x),(ptr),sizeof(*(ptr))) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err = 0; \ + unsigned long __gu_val; \ + might_sleep(); \ + __get_user_size(__gu_val,(ptr),(size),__gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_READ,__gu_addr,size)) \ + __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +extern long __get_user_bad(void); + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: __get_user_asm(x,ptr,retval,"ub"); break; \ + case 2: __get_user_asm(x,ptr,retval,"uh"); break; \ + case 4: __get_user_asm(x,ptr,retval,""); break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __get_user_asm(x, addr, err, itype) \ + __asm__ __volatile__( \ + " .fillinsn\n" \ + "1: ld"itype" %1,@%2\n" \ + " .fillinsn\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "3: ldi %0,%3\n" \ + " seth r14,#high(2b)\n" \ + " or3 r14,r14,#low(2b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : "=&r" (err), "=&r" (x) \ + : "r" (addr), "i" (-EFAULT), "0" (err) \ + : "r14", "memory") + +/** + * __put_user: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user(x,ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) + + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + might_sleep(); \ + __put_user_size((x),(ptr),(size),__pu_err); \ + __pu_err; \ +}) + + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ + __put_user_size((x),__pu_addr,(size),__pu_err); \ + __pu_err; \ +}) + +#if defined(__LITTLE_ENDIAN__) +#define __put_user_u64(x, addr, err) \ + __asm__ __volatile__( \ + " .fillinsn\n" \ + "1: st %L1,@%2\n" \ + " .fillinsn\n" \ + "2: st %H1,@(4,%2)\n" \ + " .fillinsn\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "4: ldi %0,%3\n" \ + " seth r14,#high(3b)\n" \ + " or3 r14,r14,#low(3b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b,4b\n" \ + " .long 2b,4b\n" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ + : "r14", "memory") + +#elif defined(__BIG_ENDIAN__) +#define __put_user_u64(x, addr, err) \ + __asm__ __volatile__( \ + " .fillinsn\n" \ + "1: st %H1,@%2\n" \ + " .fillinsn\n" \ + "2: st %L1,@(4,%2)\n" \ + " .fillinsn\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "4: ldi %0,%3\n" \ + " seth r14,#high(3b)\n" \ + " or3 r14,r14,#low(3b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b,4b\n" \ + " .long 2b,4b\n" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ + : "r14", "memory") +#else +#error no endian defined +#endif + +extern void __put_user_bad(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: __put_user_asm(x,ptr,retval,"b"); break; \ + case 2: __put_user_asm(x,ptr,retval,"h"); break; \ + case 4: __put_user_asm(x,ptr,retval,""); break; \ + case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\ + default: __put_user_bad(); \ + } \ +} while (0) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct *)(x)) + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ +#define __put_user_asm(x, addr, err, itype) \ + __asm__ __volatile__( \ + " .fillinsn\n" \ + "1: st"itype" %1,@%2\n" \ + " .fillinsn\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "3: ldi %0,%3\n" \ + " seth r14,#high(2b)\n" \ + " or3 r14,r14,#low(2b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ + : "r14", "memory") + +/* + * Here we special-case 1, 2 and 4-byte copy_*_user invocations. On a fault + * we return the initial request size (1, 2 or 4), as copy_*_user should do. + * If a store crosses a page boundary and gets a fault, the m32r will not write + * anything, so this is accurate. + */ + +/* + * Copy To/From Userspace + */ + +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied. */ +#define __copy_user(to,from,size) \ +do { \ + unsigned long __dst, __src, __c; \ + __asm__ __volatile__ ( \ + " mv r14, %0\n" \ + " or r14, %1\n" \ + " beq %0, %1, 9f\n" \ + " beqz %2, 9f\n" \ + " and3 r14, r14, #3\n" \ + " bnez r14, 2f\n" \ + " and3 %2, %2, #3\n" \ + " beqz %3, 2f\n" \ + " addi %0, #-4 ; word_copy \n" \ + " .fillinsn\n" \ + "0: ld r14, @%1+\n" \ + " addi %3, #-1\n" \ + " .fillinsn\n" \ + "1: st r14, @+%0\n" \ + " bnez %3, 0b\n" \ + " beqz %2, 9f\n" \ + " addi %0, #4\n" \ + " .fillinsn\n" \ + "2: ldb r14, @%1 ; byte_copy \n" \ + " .fillinsn\n" \ + "3: stb r14, @%0\n" \ + " addi %1, #1\n" \ + " addi %2, #-1\n" \ + " addi %0, #1\n" \ + " bnez %2, 2b\n" \ + " .fillinsn\n" \ + "9:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "5: addi %3, #1\n" \ + " addi %1, #-4\n" \ + " .fillinsn\n" \ + "6: slli %3, #2\n" \ + " add %2, %3\n" \ + " addi %0, #4\n" \ + " .fillinsn\n" \ + "7: seth r14, #high(9b)\n" \ + " or3 r14, r14, #low(9b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,6b\n" \ + " .long 1b,5b\n" \ + " .long 2b,9b\n" \ + " .long 3b,9b\n" \ + ".previous\n" \ + : "=&r" (__dst), "=&r" (__src), "=&r" (size), \ + "=&r" (__c) \ + : "0" (to), "1" (from), "2" (size), "3" (size / 4) \ + : "r14", "memory"); \ +} while (0) + +#define __copy_user_zeroing(to,from,size) \ +do { \ + unsigned long __dst, __src, __c; \ + __asm__ __volatile__ ( \ + " mv r14, %0\n" \ + " or r14, %1\n" \ + " beq %0, %1, 9f\n" \ + " beqz %2, 9f\n" \ + " and3 r14, r14, #3\n" \ + " bnez r14, 2f\n" \ + " and3 %2, %2, #3\n" \ + " beqz %3, 2f\n" \ + " addi %0, #-4 ; word_copy \n" \ + " .fillinsn\n" \ + "0: ld r14, @%1+\n" \ + " addi %3, #-1\n" \ + " .fillinsn\n" \ + "1: st r14, @+%0\n" \ + " bnez %3, 0b\n" \ + " beqz %2, 9f\n" \ + " addi %0, #4\n" \ + " .fillinsn\n" \ + "2: ldb r14, @%1 ; byte_copy \n" \ + " .fillinsn\n" \ + "3: stb r14, @%0\n" \ + " addi %1, #1\n" \ + " addi %2, #-1\n" \ + " addi %0, #1\n" \ + " bnez %2, 2b\n" \ + " .fillinsn\n" \ + "9:\n" \ + ".section .fixup,\"ax\"\n" \ + " .balign 4\n" \ + "5: addi %3, #1\n" \ + " addi %1, #-4\n" \ + " .fillinsn\n" \ + "6: slli %3, #2\n" \ + " add %2, %3\n" \ + " addi %0, #4\n" \ + " .fillinsn\n" \ + "7: ldi r14, #0 ; store zero \n" \ + " .fillinsn\n" \ + "8: addi %2, #-1\n" \ + " stb r14, @%0 ; ACE? \n" \ + " addi %0, #1\n" \ + " bnez %2, 8b\n" \ + " seth r14, #high(9b)\n" \ + " or3 r14, r14, #low(9b)\n" \ + " jmp r14\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,6b\n" \ + " .long 1b,5b\n" \ + " .long 2b,7b\n" \ + " .long 3b,7b\n" \ + ".previous\n" \ + : "=&r" (__dst), "=&r" (__src), "=&r" (size), \ + "=&r" (__c) \ + : "0" (to), "1" (from), "2" (size), "3" (size / 4) \ + : "r14", "memory"); \ +} while (0) + + +/* We let the __ versions of copy_from/to_user inline, because they're often + * used in fast paths and have only a small space overhead. + */ +static inline unsigned long __generic_copy_from_user_nocheck(void *to, + const void __user *from, unsigned long n) +{ + __copy_user_zeroing(to,from,n); + return n; +} + +static inline unsigned long __generic_copy_to_user_nocheck(void __user *to, + const void *from, unsigned long n) +{ + __copy_user(to,from,n); + return n; +} + +unsigned long __generic_copy_to_user(void __user *, const void *, unsigned long); +unsigned long __generic_copy_from_user(void *, const void __user *, unsigned long); + +/** + * __copy_to_user: - Copy a block of data into user space, with less checking. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +#define __copy_to_user(to,from,n) \ + __generic_copy_to_user_nocheck((to),(from),(n)) + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/** + * copy_to_user: - Copy a block of data into user space. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +#define copy_to_user(to,from,n) \ +({ \ + might_sleep(); \ + __generic_copy_to_user((to),(from),(n)); \ +}) + +/** + * __copy_from_user: - Copy a block of data from user space, with less checking. * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +#define __copy_from_user(to,from,n) \ + __generic_copy_from_user_nocheck((to),(from),(n)) + +/** + * copy_from_user: - Copy a block of data from user space. + * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +#define copy_from_user(to,from,n) \ +({ \ + might_sleep(); \ + __generic_copy_from_user((to),(from),(n)); \ +}) + +long __must_check strncpy_from_user(char *dst, const char __user *src, + long count); +long __must_check __strncpy_from_user(char *dst, + const char __user *src, long count); + +/** + * __clear_user: - Zero a block of memory in user space, with less checking. + * @to: Destination address, in user space. + * @n: Number of bytes to zero. + * + * Zero a block of memory in user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be cleared. + * On success, this will be zero. + */ +unsigned long __clear_user(void __user *mem, unsigned long len); + +/** + * clear_user: - Zero a block of memory in user space. + * @to: Destination address, in user space. + * @n: Number of bytes to zero. + * + * Zero a block of memory in user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be cleared. + * On success, this will be zero. + */ +unsigned long clear_user(void __user *mem, unsigned long len); + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) +long strnlen_user(const char __user *str, long n); + +#endif /* _ASM_M32R_UACCESS_H */ diff --git a/arch/m32r/include/asm/ucontext.h b/arch/m32r/include/asm/ucontext.h new file mode 100644 index 0000000..0932474 --- /dev/null +++ b/arch/m32r/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef _ASM_M32R_UCONTEXT_H +#define _ASM_M32R_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _ASM_M32R_UCONTEXT_H */ diff --git a/arch/m32r/include/asm/unaligned.h b/arch/m32r/include/asm/unaligned.h new file mode 100644 index 0000000..377eb20 --- /dev/null +++ b/arch/m32r/include/asm/unaligned.h @@ -0,0 +1,18 @@ +#ifndef _ASM_M32R_UNALIGNED_H +#define _ASM_M32R_UNALIGNED_H + +#if defined(__LITTLE_ENDIAN__) +# include +# include +# include +# define get_unaligned __get_unaligned_le +# define put_unaligned __put_unaligned_le +#else +# include +# include +# include +# define get_unaligned __get_unaligned_be +# define put_unaligned __put_unaligned_be +#endif + +#endif /* _ASM_M32R_UNALIGNED_H */ diff --git a/arch/m32r/include/asm/unistd.h b/arch/m32r/include/asm/unistd.h new file mode 100644 index 0000000..cf701c9 --- /dev/null +++ b/arch/m32r/include/asm/unistd.h @@ -0,0 +1,389 @@ +#ifndef _ASM_M32R_UNISTD_H +#define _ASM_M32R_UNISTD_H + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +/* 16 is unused */ +/* 17 is unused */ +/* 18 is unused */ +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +/* 23 is unused */ +/* 24 is unused */ +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +/* 28 is unused */ +#define __NR_pause 29 +#define __NR_utime 30 +/* 31 is unused */ +#define __NR_cachectl 32 /* old #define __NR_gtty 32*/ +#define __NR_access 33 +/* 34 is unused */ +/* 35 is unused */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +/* 44 is unused */ +#define __NR_brk 45 +/* 46 is unused */ +/* 47 is unused (getgid16) */ +/* 48 is unused */ +/* 49 is unused */ +/* 50 is unused */ +#define __NR_acct 51 +#define __NR_umount2 52 +/* 53 is unused */ +#define __NR_ioctl 54 +/* 55 is unused (fcntl) */ +/* 56 is unused */ +#define __NR_setpgid 57 +/* 58 is unused */ +/* 59 is unused */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +/* 67 is unused */ +/* 68 is unused*/ +/* 69 is unused*/ +/* 70 is unused */ +/* 71 is unused */ +/* 72 is unused */ +/* 73 is unused */ +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +/* 76 is unused (old getrlimit) */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +/* 80 is unused */ +/* 81 is unused */ +/* 82 is unused */ +#define __NR_symlink 83 +/* 84 is unused */ +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +/* 89 is unused */ +/* 90 is unused */ +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +/* 95 is unused */ +#define __NR_getpriority 96 +#define __NR_setpriority 97 +/* 98 is unused */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 +/* 101 is unused */ +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +/* 109 is unused */ +/* 110 is unused */ +#define __NR_vhangup 111 +/* 112 is unused */ +/* 113 is unused */ +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +/* 119 is unused */ +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +/* 123 is unused */ +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +/* 126 is unused */ +/* 127 is unused */ +#define __NR_init_module 128 +#define __NR_delete_module 129 +/* 130 is unused */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +/* 137 is unused */ +/* 138 is unused */ +/* 139 is unused */ +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +/* 164 is unused */ +/* 165 is unused */ +#define __NR_tas 166 +/* 167 is unused */ +#define __NR_poll 168 +#define __NR_nfsservctl 169 +/* 170 is unused */ +/* 171 is unused */ +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +/* 182 is unused */ +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +/* 188 is unused */ +/* 189 is unused */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 222 is unused */ +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 +/* 251 is unused */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +/* 285 is unused */ +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +/* #define __NR_timerfd 322 removed */ +#define __NR_eventfd 323 +#define __NR_fallocate 324 + +#ifdef __KERNEL__ + +#define NR_syscalls 325 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_OLD_GETRLIMIT /*will be unused*/ +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_RT_SIGACTION + +#define __IGNORE_lchown +#define __IGNORE_setuid +#define __IGNORE_getuid +#define __IGNORE_setgid +#define __IGNORE_getgid +#define __IGNORE_geteuid +#define __IGNORE_getegid +#define __IGNORE_fcntl +#define __IGNORE_setreuid +#define __IGNORE_setregid +#define __IGNORE_getrlimit +#define __IGNORE_getgroups +#define __IGNORE_setgroups +#define __IGNORE_select +#define __IGNORE_mmap +#define __IGNORE_fchown +#define __IGNORE_setfsuid +#define __IGNORE_setfsgid +#define __IGNORE_setresuid +#define __IGNORE_getresuid +#define __IGNORE_setresgid +#define __IGNORE_getresgid +#define __IGNORE_chown + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_M32R_UNISTD_H */ diff --git a/arch/m32r/include/asm/user.h b/arch/m32r/include/asm/user.h new file mode 100644 index 0000000..03b3c11 --- /dev/null +++ b/arch/m32r/include/asm/user.h @@ -0,0 +1,52 @@ +#ifndef _ASM_M32R_USER_H +#define _ASM_M32R_USER_H + +#include +#include +#include + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd). + * + * The actual file contents are as follows: + * UPAGE: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page. + * DATA: The data area is stored. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * STACK: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these off in order to be + * able to write an integer number of pages. + */ + +struct user { + struct pt_regs regs; /* entire machine state */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _ASM_M32R_USER_H */ diff --git a/arch/m32r/include/asm/vga.h b/arch/m32r/include/asm/vga.h new file mode 100644 index 0000000..a1b6306 --- /dev/null +++ b/arch/m32r/include/asm/vga.h @@ -0,0 +1,20 @@ +#ifndef _ASM_M32R_VGA_H +#define _ASM_M32R_VGA_H + +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares + */ + +/* + * On the PC, we can just recalculate addresses and then + * access the videoram directly without any black magic. + */ + +#define VGA_MAP_MEM(x,s) (unsigned long)phys_to_virt(x) + +#define vga_readb(x) (*(x)) +#define vga_writeb(x,y) (*(y) = (x)) + +#endif /* _ASM_M32R_VGA_H */ diff --git a/arch/m32r/include/asm/xor.h b/arch/m32r/include/asm/xor.h new file mode 100644 index 0000000..6d52525 --- /dev/null +++ b/arch/m32r/include/asm/xor.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M32R_XOR_H +#define _ASM_M32R_XOR_H + +#include + +#endif /* _ASM_M32R_XOR_H */ diff --git a/include/asm-m32r/Kbuild b/include/asm-m32r/Kbuild deleted file mode 100644 index c68e168..0000000 --- a/include/asm-m32r/Kbuild +++ /dev/null @@ -1 +0,0 @@ -include include/asm-generic/Kbuild.asm diff --git a/include/asm-m32r/addrspace.h b/include/asm-m32r/addrspace.h deleted file mode 100644 index 81782c1..0000000 --- a/include/asm-m32r/addrspace.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 by Hiroyuki Kondo - * - * Defitions for the address spaces of the M32R CPUs. - */ -#ifndef __ASM_M32R_ADDRSPACE_H -#define __ASM_M32R_ADDRSPACE_H - -/* - * Memory segments (32bit kernel mode addresses) - */ -#define KUSEG 0x00000000 -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 -#define KSEG2 0xc0000000 -#define KSEG3 0xe0000000 - -#define K0BASE KSEG0 - -/* - * Returns the kernel segment base of a given address - */ -#ifndef __ASSEMBLY__ -#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000) -#else -#define KSEGX(a) ((a) & 0xe0000000) -#endif - -/* - * Returns the physical address of a KSEG0/KSEG1 address - */ -#ifndef __ASSEMBLY__ -#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) -#else -#define PHYSADDR(a) ((a) & 0x1fffffff) -#endif - -/* - * Map an address to a certain kernel segment - */ -#ifndef __ASSEMBLY__ -#define KSEG0ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG0)) -#define KSEG1ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG1)) -#define KSEG2ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG2)) -#define KSEG3ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG3)) -#else -#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0) -#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1) -#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2) -#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3) -#endif - -#endif /* __ASM_M32R_ADDRSPACE_H */ diff --git a/include/asm-m32r/assembler.h b/include/asm-m32r/assembler.h deleted file mode 100644 index 2635153..0000000 --- a/include/asm-m32r/assembler.h +++ /dev/null @@ -1,229 +0,0 @@ -#ifndef _ASM_M32R_ASSEMBLER_H -#define _ASM_M32R_ASSEMBLER_H - -/* - * linux/asm-m32r/assembler.h - * - * Copyright (C) 2004 Hirokazu Takata - * - * This file contains M32R architecture specific macro definitions. - */ - - -#ifndef __STR -#ifdef __ASSEMBLY__ -#define __STR(x) x -#else -#define __STR(x) #x -#endif -#endif /* __STR */ - -#ifdef CONFIG_SMP -#define M32R_LOCK __STR(lock) -#define M32R_UNLOCK __STR(unlock) -#else -#define M32R_LOCK __STR(ld) -#define M32R_UNLOCK __STR(st) -#endif - -#ifdef __ASSEMBLY__ -#undef ENTRY -#define ENTRY(name) ENTRY_M name - .macro ENTRY_M name - .global \name - ALIGN -\name: - .endm -#endif - - -/** - * LDIMM - load immediate value - * STI - enable interruption - * CLI - disable interruption - */ - -#ifdef __ASSEMBLY__ - -#define LDIMM(reg,x) LDIMM reg x - .macro LDIMM reg x - seth \reg, #high(\x) - or3 \reg, \reg, #low(\x) - .endm - -#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) -#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg - .macro ENABLE_INTERRUPTS reg - setpsw #0x40 -> nop - ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1). - .endm - -#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg - .macro DISABLE_INTERRUPTS reg - clrpsw #0x40 -> nop - ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1). - .endm -#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ -#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg - .macro ENABLE_INTERRUPTS reg - mvfc \reg, psw - or3 \reg, \reg, #0x0040 - mvtc \reg, psw - .endm - -#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg - .macro DISABLE_INTERRUPTS reg - mvfc \reg, psw - and3 \reg, \reg, #0xffbf - mvtc \reg, psw - .endm -#endif /* CONFIG_CHIP_M32102 */ - - .macro SAVE_ALL - push r0 ; orig_r0 - push sp ; spi (r15) - push lr ; r14 - push r13 - mvfc r13, cr3 ; spu - push r13 - mvfc r13, bbpc - push r13 - mvfc r13, bbpsw - push r13 - mvfc r13, bpc - push r13 - mvfc r13, psw - push r13 -#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) - mvfaclo r13, a1 - push r13 - mvfachi r13, a1 - push r13 - mvfaclo r13, a0 - push r13 - mvfachi r13, a0 - push r13 -#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) - mvfaclo r13 - push r13 - mvfachi r13 - push r13 - ldi r13, #0 - push r13 ; dummy push acc1h - push r13 ; dummy push acc1l -#else -#error unknown isa configuration -#endif - ldi r13, #-1 - push r13 ; syscall_nr (default: -1) - push r12 - push r11 - push r10 - push r9 - push r8 - push r7 - push r3 - push r2 - push r1 - push r0 - addi sp, #-4 ; room for implicit pt_regs parameter - push r6 - push r5 - push r4 - .endm - - .macro RESTORE_ALL - pop r4 - pop r5 - pop r6 - addi sp, #4 - pop r0 - pop r1 - pop r2 - pop r3 - pop r7 - pop r8 - pop r9 - pop r10 - pop r11 - pop r12 - addi r15, #4 ; Skip syscall number -#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) - pop r13 - mvtachi r13, a0 - pop r13 - mvtaclo r13, a0 - pop r13 - mvtachi r13, a1 - pop r13 - mvtaclo r13, a1 -#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) - pop r13 ; dummy pop acc1h - pop r13 ; dummy pop acc1l - pop r13 - mvtachi r13 - pop r13 - mvtaclo r13 -#else -#error unknown isa configuration -#endif - pop r14 - mvtc r14, psw - pop r14 - mvtc r14, bpc - addi sp, #8 ; Skip bbpsw, bbpc - pop r14 - mvtc r14, cr3 ; spu - pop r13 - pop lr ; r14 - pop sp ; spi (r15) - addi sp, #4 ; Skip orig_r0 - .fillinsn -1: rte - .section .fixup,"ax" -2: bl do_exit - .previous - .section __ex_table,"a" - ALIGN - .long 1b, 2b - .previous - .endm - -#define GET_CURRENT(reg) get_current reg - .macro get_current reg - ldi \reg, #-8192 - and \reg, sp - .endm - -#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) - .macro SWITCH_TO_KERNEL_STACK - ; switch to kernel stack (spi) - clrpsw #0x80 -> nop - .endm -#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ - .macro SWITCH_TO_KERNEL_STACK - push r0 ; save r0 for working - mvfc r0, psw - and3 r0, r0, #0x00ff7f - mvtc r0, psw - slli r0, #16 - bltz r0, 1f ; check BSM-bit -; - ;; called from kernel context: previous stack = spi - pop r0 ; retrieve r0 - bra 2f - .fillinsn -1: - ;; called from user context: previous stack = spu - mvfc r0, cr3 ; spu - addi r0, #4 - mvtc r0, cr3 ; spu - ld r0, @(-4,r0) ; retrieve r0 - .fillinsn -2: - .endm -#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_M32R_ASSEMBLER_H */ diff --git a/include/asm-m32r/atomic.h b/include/asm-m32r/atomic.h deleted file mode 100644 index 2eed30f..0000000 --- a/include/asm-m32r/atomic.h +++ /dev/null @@ -1,318 +0,0 @@ -#ifndef _ASM_M32R_ATOMIC_H -#define _ASM_M32R_ATOMIC_H - -/* - * linux/include/asm-m32r/atomic.h - * - * M32R version: - * Copyright (C) 2001, 2002 Hitoshi Yamamoto - * Copyright (C) 2004 Hirokazu Takata - */ - -#include -#include -#include - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -#define ATOMIC_INIT(i) { (i) } - -/** - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. - */ -#define atomic_read(v) ((v)->counter) - -/** - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. - */ -#define atomic_set(v,i) (((v)->counter) = (i)) - -/** - * atomic_add_return - add integer to atomic variable and return it - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v and return (@i + @v). - */ -static __inline__ int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int result; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# atomic_add_return \n\t" - DCACHE_CLEAR("%0", "r4", "%1") - M32R_LOCK" %0, @%1; \n\t" - "add %0, %2; \n\t" - M32R_UNLOCK" %0, @%1; \n\t" - : "=&r" (result) - : "r" (&v->counter), "r" (i) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return result; -} - -/** - * atomic_sub_return - subtract integer from atomic variable and return it - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v and return (@v - @i). - */ -static __inline__ int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long flags; - int result; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# atomic_sub_return \n\t" - DCACHE_CLEAR("%0", "r4", "%1") - M32R_LOCK" %0, @%1; \n\t" - "sub %0, %2; \n\t" - M32R_UNLOCK" %0, @%1; \n\t" - : "=&r" (result) - : "r" (&v->counter), "r" (i) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return result; -} - -/** - * atomic_add - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v. - */ -#define atomic_add(i,v) ((void) atomic_add_return((i), (v))) - -/** - * atomic_sub - subtract the atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v. - */ -#define atomic_sub(i,v) ((void) atomic_sub_return((i), (v))) - -/** - * atomic_sub_and_test - subtract value from variable and test result - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v and returns - * true if the result is zero, or false for all - * other cases. - */ -#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) - -/** - * atomic_inc_return - increment atomic variable and return it - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 and returns the result. - */ -static __inline__ int atomic_inc_return(atomic_t *v) -{ - unsigned long flags; - int result; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# atomic_inc_return \n\t" - DCACHE_CLEAR("%0", "r4", "%1") - M32R_LOCK" %0, @%1; \n\t" - "addi %0, #1; \n\t" - M32R_UNLOCK" %0, @%1; \n\t" - : "=&r" (result) - : "r" (&v->counter) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return result; -} - -/** - * atomic_dec_return - decrement atomic variable and return it - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1 and returns the result. - */ -static __inline__ int atomic_dec_return(atomic_t *v) -{ - unsigned long flags; - int result; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# atomic_dec_return \n\t" - DCACHE_CLEAR("%0", "r4", "%1") - M32R_LOCK" %0, @%1; \n\t" - "addi %0, #-1; \n\t" - M32R_UNLOCK" %0, @%1; \n\t" - : "=&r" (result) - : "r" (&v->counter) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return result; -} - -/** - * atomic_inc - increment atomic variable - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1. - */ -#define atomic_inc(v) ((void)atomic_inc_return(v)) - -/** - * atomic_dec - decrement atomic variable - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1. - */ -#define atomic_dec(v) ((void)atomic_dec_return(v)) - -/** - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -/** - * atomic_dec_and_test - decrement and test - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1 and - * returns true if the result is 0, or false for all - * other cases. - */ -#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) - -/** - * atomic_add_negative - add and test if negative - * @v: pointer of type atomic_t - * @i: integer value to add - * - * Atomically adds @i to @v and returns true - * if the result is negative, or false when - * result is greater than or equal to zero. - */ -#define atomic_add_negative(i,v) (atomic_add_return((i), (v)) < 0) - -#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -/** - * atomic_add_unless - add unless the number is a given value - * @v: pointer of type atomic_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. - */ -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t *addr) -{ - unsigned long flags; - unsigned long tmp; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# atomic_clear_mask \n\t" - DCACHE_CLEAR("%0", "r5", "%1") - M32R_LOCK" %0, @%1; \n\t" - "and %0, %2; \n\t" - M32R_UNLOCK" %0, @%1; \n\t" - : "=&r" (tmp) - : "r" (addr), "r" (~mask) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r5" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); -} - -static __inline__ void atomic_set_mask(unsigned long mask, atomic_t *addr) -{ - unsigned long flags; - unsigned long tmp; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# atomic_set_mask \n\t" - DCACHE_CLEAR("%0", "r5", "%1") - M32R_LOCK" %0, @%1; \n\t" - "or %0, %2; \n\t" - M32R_UNLOCK" %0, @%1; \n\t" - : "=&r" (tmp) - : "r" (addr), "r" (mask) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r5" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); -} - -/* Atomic operations are already serializing on m32r */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif /* _ASM_M32R_ATOMIC_H */ diff --git a/include/asm-m32r/auxvec.h b/include/asm-m32r/auxvec.h deleted file mode 100644 index f76dcc8..0000000 --- a/include/asm-m32r/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_M32R__AUXVEC_H -#define _ASM_M32R__AUXVEC_H - -#endif /* _ASM_M32R__AUXVEC_H */ diff --git a/include/asm-m32r/bitops.h b/include/asm-m32r/bitops.h deleted file mode 100644 index aaddf0d..0000000 --- a/include/asm-m32r/bitops.h +++ /dev/null @@ -1,275 +0,0 @@ -#ifndef _ASM_M32R_BITOPS_H -#define _ASM_M32R_BITOPS_H - -/* - * linux/include/asm-m32r/bitops.h - * - * Copyright 1992, Linus Torvalds. - * - * M32R version: - * Copyright (C) 2001, 2002 Hitoshi Yamamoto - * Copyright (C) 2004 Hirokazu Takata - */ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include -#include -#include -#include - -/* - * These have to be done with inline assembly: that way the bit-setting - * is guaranteed to be atomic. All bit operations return 0 if the bit - * was cleared before the operation and != 0 if it was not. - * - * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). - */ - -/** - * set_bit - Atomically set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * This function is atomic and may not be reordered. See __set_bit() - * if you do not require the atomic guarantees. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static __inline__ void set_bit(int nr, volatile void * addr) -{ - __u32 mask; - volatile __u32 *a = addr; - unsigned long flags; - unsigned long tmp; - - a += (nr >> 5); - mask = (1 << (nr & 0x1F)); - - local_irq_save(flags); - __asm__ __volatile__ ( - DCACHE_CLEAR("%0", "r6", "%1") - M32R_LOCK" %0, @%1; \n\t" - "or %0, %2; \n\t" - M32R_UNLOCK" %0, @%1; \n\t" - : "=&r" (tmp) - : "r" (a), "r" (mask) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r6" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); -} - -/** - * clear_bit - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and may not be reordered. However, it does - * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() - * in order to ensure changes are visible on other processors. - */ -static __inline__ void clear_bit(int nr, volatile void * addr) -{ - __u32 mask; - volatile __u32 *a = addr; - unsigned long flags; - unsigned long tmp; - - a += (nr >> 5); - mask = (1 << (nr & 0x1F)); - - local_irq_save(flags); - - __asm__ __volatile__ ( - DCACHE_CLEAR("%0", "r6", "%1") - M32R_LOCK" %0, @%1; \n\t" - "and %0, %2; \n\t" - M32R_UNLOCK" %0, @%1; \n\t" - : "=&r" (tmp) - : "r" (a), "r" (~mask) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r6" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); -} - -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -/** - * change_bit - Toggle a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * change_bit() is atomic and may not be reordered. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static __inline__ void change_bit(int nr, volatile void * addr) -{ - __u32 mask; - volatile __u32 *a = addr; - unsigned long flags; - unsigned long tmp; - - a += (nr >> 5); - mask = (1 << (nr & 0x1F)); - - local_irq_save(flags); - __asm__ __volatile__ ( - DCACHE_CLEAR("%0", "r6", "%1") - M32R_LOCK" %0, @%1; \n\t" - "xor %0, %2; \n\t" - M32R_UNLOCK" %0, @%1; \n\t" - : "=&r" (tmp) - : "r" (a), "r" (mask) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r6" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); -} - -/** - * test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static __inline__ int test_and_set_bit(int nr, volatile void * addr) -{ - __u32 mask, oldbit; - volatile __u32 *a = addr; - unsigned long flags; - unsigned long tmp; - - a += (nr >> 5); - mask = (1 << (nr & 0x1F)); - - local_irq_save(flags); - __asm__ __volatile__ ( - DCACHE_CLEAR("%0", "%1", "%2") - M32R_LOCK" %0, @%2; \n\t" - "mv %1, %0; \n\t" - "and %0, %3; \n\t" - "or %1, %3; \n\t" - M32R_UNLOCK" %1, @%2; \n\t" - : "=&r" (oldbit), "=&r" (tmp) - : "r" (a), "r" (mask) - : "memory" - ); - local_irq_restore(flags); - - return (oldbit != 0); -} - -/** - * test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static __inline__ int test_and_clear_bit(int nr, volatile void * addr) -{ - __u32 mask, oldbit; - volatile __u32 *a = addr; - unsigned long flags; - unsigned long tmp; - - a += (nr >> 5); - mask = (1 << (nr & 0x1F)); - - local_irq_save(flags); - - __asm__ __volatile__ ( - DCACHE_CLEAR("%0", "%1", "%3") - M32R_LOCK" %0, @%3; \n\t" - "mv %1, %0; \n\t" - "and %0, %2; \n\t" - "not %2, %2; \n\t" - "and %1, %2; \n\t" - M32R_UNLOCK" %1, @%3; \n\t" - : "=&r" (oldbit), "=&r" (tmp), "+r" (mask) - : "r" (a) - : "memory" - ); - local_irq_restore(flags); - - return (oldbit != 0); -} - -/** - * test_and_change_bit - Change a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static __inline__ int test_and_change_bit(int nr, volatile void * addr) -{ - __u32 mask, oldbit; - volatile __u32 *a = addr; - unsigned long flags; - unsigned long tmp; - - a += (nr >> 5); - mask = (1 << (nr & 0x1F)); - - local_irq_save(flags); - __asm__ __volatile__ ( - DCACHE_CLEAR("%0", "%1", "%2") - M32R_LOCK" %0, @%2; \n\t" - "mv %1, %0; \n\t" - "and %0, %3; \n\t" - "xor %1, %3; \n\t" - M32R_UNLOCK" %1, @%2; \n\t" - : "=&r" (oldbit), "=&r" (tmp) - : "r" (a), "r" (mask) - : "memory" - ); - local_irq_restore(flags); - - return (oldbit != 0); -} - -#include -#include -#include -#include -#include -#include - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -#endif /* __KERNEL__ */ - -#ifdef __KERNEL__ - -#include -#include -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_M32R_BITOPS_H */ diff --git a/include/asm-m32r/bug.h b/include/asm-m32r/bug.h deleted file mode 100644 index 4cc0462..0000000 --- a/include/asm-m32r/bug.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _M32R_BUG_H -#define _M32R_BUG_H -#include -#endif diff --git a/include/asm-m32r/bugs.h b/include/asm-m32r/bugs.h deleted file mode 100644 index f77214e..0000000 --- a/include/asm-m32r/bugs.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_M32R_BUGS_H -#define _ASM_M32R_BUGS_H - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ -#include - -static void __init check_bugs(void) -{ - extern unsigned long loops_per_jiffy; - - current_cpu_data.loops_per_jiffy = loops_per_jiffy; -} - -#endif /* _ASM_M32R_BUGS_H */ diff --git a/include/asm-m32r/byteorder.h b/include/asm-m32r/byteorder.h deleted file mode 100644 index 21855d8..0000000 --- a/include/asm-m32r/byteorder.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_M32R_BYTEORDER_H -#define _ASM_M32R_BYTEORDER_H - -#if defined(__LITTLE_ENDIAN__) -# include -#else -# include -#endif - -#endif /* _ASM_M32R_BYTEORDER_H */ diff --git a/include/asm-m32r/cache.h b/include/asm-m32r/cache.h deleted file mode 100644 index 40b3ee9..0000000 --- a/include/asm-m32r/cache.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_M32R_CACHE_H -#define _ASM_M32R_CACHE_H - -/* L1 cache line size */ -#define L1_CACHE_SHIFT 4 -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#endif /* _ASM_M32R_CACHE_H */ diff --git a/include/asm-m32r/cachectl.h b/include/asm-m32r/cachectl.h deleted file mode 100644 index 2aab8f6..0000000 --- a/include/asm-m32r/cachectl.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * cachectl.h -- defines for M32R cache control system calls - * - * Copyright (C) 2003 by Kazuhiro Inaoka - */ -#ifndef __ASM_M32R_CACHECTL -#define __ASM_M32R_CACHECTL - -/* - * Options for cacheflush system call - * - * cacheflush() is currently fluch_cache_all(). - */ -#define ICACHE (1<<0) /* flush instruction cache */ -#define DCACHE (1<<1) /* writeback and flush data cache */ -#define BCACHE (ICACHE|DCACHE) /* flush both caches */ - -/* - * Caching modes for the cachectl(2) call - * - * cachectl(2) is currently not supported and returns ENOSYS. - */ -#define CACHEABLE 0 /* make pages cacheable */ -#define UNCACHEABLE 1 /* make pages uncacheable */ - -#endif /* __ASM_M32R_CACHECTL */ diff --git a/include/asm-m32r/cacheflush.h b/include/asm-m32r/cacheflush.h deleted file mode 100644 index 78587c9..0000000 --- a/include/asm-m32r/cacheflush.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _ASM_M32R_CACHEFLUSH_H -#define _ASM_M32R_CACHEFLUSH_H - -#include - -extern void _flush_cache_all(void); -extern void _flush_cache_copyback_all(void); - -#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104) -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#ifndef CONFIG_SMP -#define flush_icache_range(start, end) _flush_cache_copyback_all() -#define flush_icache_page(vma,pg) _flush_cache_copyback_all() -#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_copyback_all() -#define flush_cache_sigtramp(addr) _flush_cache_copyback_all() -#else /* CONFIG_SMP */ -extern void smp_flush_cache_all(void); -#define flush_icache_range(start, end) smp_flush_cache_all() -#define flush_icache_page(vma,pg) smp_flush_cache_all() -#define flush_icache_user_range(vma,pg,adr,len) smp_flush_cache_all() -#define flush_cache_sigtramp(addr) _flush_cache_copyback_all() -#endif /* CONFIG_SMP */ -#elif defined(CONFIG_CHIP_M32102) -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) _flush_cache_all() -#define flush_icache_page(vma,pg) _flush_cache_all() -#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_all() -#define flush_cache_sigtramp(addr) _flush_cache_all() -#else -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_sigtramp(addr) do { } while (0) -#endif /* CONFIG_CHIP_* */ - -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ -} while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -#endif /* _ASM_M32R_CACHEFLUSH_H */ diff --git a/include/asm-m32r/checksum.h b/include/asm-m32r/checksum.h deleted file mode 100644 index a7a7c4f..0000000 --- a/include/asm-m32r/checksum.h +++ /dev/null @@ -1,204 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_M32R_CHECKSUM_H -#define _ASM_M32R_CHECKSUM_H - -/* - * include/asm-m32r/checksum.h - * - * IP/TCP/UDP checksum routines - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Some code taken from mips and parisc architecture. - * - * Copyright (C) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata - * Copyright (C) 2004 Hirokazu Takata - */ - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * The same as csum_partial, but copies from src while it checksums. - * - * Here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); - -/* - * This is a new version of the above that records errors it finds in *errp, - * but continues and zeros thre rest of the buffer. - */ -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, - int *err_ptr); - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned long tmpreg; - __asm__( - " sll3 %1, %0, #16 \n" - " cmp %0, %0 \n" - " addx %0, %1 \n" - " ldi %1, #0 \n" - " srli %0, #16 \n" - " addx %0, %1 \n" - " xor3 %0, %0, #0x0000ffff \n" - : "=r" (sum), "=&r" (tmpreg) - : "0" (sum) - : "cbit" - ); - return (__force __sum16)sum; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned long tmpreg0, tmpreg1; - __wsum sum; - - __asm__ __volatile__( - " ld %0, @%1+ \n" - " addi %2, #-4 \n" - "# bgez %2, 2f \n" - " cmp %0, %0 \n" - " ld %3, @%1+ \n" - " ld %4, @%1+ \n" - " addx %0, %3 \n" - " ld %3, @%1+ \n" - " addx %0, %4 \n" - " addx %0, %3 \n" - " .fillinsn\n" - "1: \n" - " ld %4, @%1+ \n" - " addi %2, #-1 \n" - " addx %0, %4 \n" - " bgtz %2, 1b \n" - "\n" - " ldi %3, #0 \n" - " addx %0, %3 \n" - " .fillinsn\n" - "2: \n" - /* Since the input registers which are loaded with iph and ihl - are modified, we must also specify them as outputs, or gcc - will assume they contain their original values. */ - : "=&r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmpreg0), "=&r" (tmpreg1) - : "1" (iph), "2" (ihl) - : "cbit", "memory"); - - return csum_fold(sum); -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ -#if defined(__LITTLE_ENDIAN) - unsigned long len_proto = (proto + len) << 8; -#else - unsigned long len_proto = proto + len; -#endif - unsigned long tmpreg; - - __asm__( - " cmp %0, %0 \n" - " addx %0, %2 \n" - " addx %0, %3 \n" - " addx %0, %4 \n" - " ldi %1, #0 \n" - " addx %0, %1 \n" - : "=r" (sum), "=&r" (tmpreg) - : "r" (daddr), "r" (saddr), "r" (len_proto), "0" (sum) - : "cbit" - ); - - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold (csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum sum) -{ - unsigned long tmpreg0, tmpreg1, tmpreg2, tmpreg3; - __asm__( - " ld %1, @(%5) \n" - " ld %2, @(4,%5) \n" - " ld %3, @(8,%5) \n" - " ld %4, @(12,%5) \n" - " add %0, %1 \n" - " addx %0, %2 \n" - " addx %0, %3 \n" - " addx %0, %4 \n" - " ld %1, @(%6) \n" - " ld %2, @(4,%6) \n" - " ld %3, @(8,%6) \n" - " ld %4, @(12,%6) \n" - " addx %0, %1 \n" - " addx %0, %2 \n" - " addx %0, %3 \n" - " addx %0, %4 \n" - " addx %0, %7 \n" - " addx %0, %8 \n" - " ldi %1, #0 \n" - " addx %0, %1 \n" - : "=&r" (sum), "=&r" (tmpreg0), "=&r" (tmpreg1), - "=&r" (tmpreg2), "=&r" (tmpreg3) - : "r" (saddr), "r" (daddr), - "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) - : "cbit" - ); - - return csum_fold(sum); -} - -#endif /* _ASM_M32R_CHECKSUM_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-m32r/cputime.h b/include/asm-m32r/cputime.h deleted file mode 100644 index 0a47550..0000000 --- a/include/asm-m32r/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M32R_CPUTIME_H -#define __M32R_CPUTIME_H - -#include - -#endif /* __M32R_CPUTIME_H */ diff --git a/include/asm-m32r/current.h b/include/asm-m32r/current.h deleted file mode 100644 index 7859d86..0000000 --- a/include/asm-m32r/current.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASM_M32R_CURRENT_H -#define _ASM_M32R_CURRENT_H - -#include - -struct task_struct; - -static __inline__ struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current (get_current()) - -#endif /* _ASM_M32R_CURRENT_H */ diff --git a/include/asm-m32r/delay.h b/include/asm-m32r/delay.h deleted file mode 100644 index 9dd9e99..0000000 --- a/include/asm-m32r/delay.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _ASM_M32R_DELAY_H -#define _ASM_M32R_DELAY_H - -/* - * Copyright (C) 1993 Linus Torvalds - * - * Delay routines calling functions in arch/m32r/lib/delay.c - */ - -extern void __bad_udelay(void); -extern void __bad_ndelay(void); - -extern void __udelay(unsigned long usecs); -extern void __ndelay(unsigned long nsecs); -extern void __const_udelay(unsigned long xloops); -extern void __delay(unsigned long loops); - -#define udelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \ - __udelay(n)) - -#define ndelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ - __ndelay(n)) - -#endif /* _ASM_M32R_DELAY_H */ diff --git a/include/asm-m32r/device.h b/include/asm-m32r/device.h deleted file mode 100644 index d8f9872..0000000 --- a/include/asm-m32r/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-m32r/div64.h b/include/asm-m32r/div64.h deleted file mode 100644 index 6cd978c..0000000 --- a/include/asm-m32r/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m32r/dma.h b/include/asm-m32r/dma.h deleted file mode 100644 index 52f6a22..0000000 --- a/include/asm-m32r/dma.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_M32R_DMA_H -#define _ASM_M32R_DMA_H - -#include - -/* - * The maximum address that we can perform a DMA transfer - * to on this platform - */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x20000000) - -#endif /* _ASM_M32R_DMA_H */ diff --git a/include/asm-m32r/elf.h b/include/asm-m32r/elf.h deleted file mode 100644 index 0cc34c9..0000000 --- a/include/asm-m32r/elf.h +++ /dev/null @@ -1,134 +0,0 @@ -#ifndef _ASM_M32R__ELF_H -#define _ASM_M32R__ELF_H - -/* - * ELF-specific definitions. - * - * Copyright (C) 1999-2004, Renesas Technology Corp. - * Hirokazu Takata - */ - -#include -#include -#include - -/* M32R relocation types */ -#define R_M32R_NONE 0 -#define R_M32R_16 1 -#define R_M32R_32 2 -#define R_M32R_24 3 -#define R_M32R_10_PCREL 4 -#define R_M32R_18_PCREL 5 -#define R_M32R_26_PCREL 6 -#define R_M32R_HI16_ULO 7 -#define R_M32R_HI16_SLO 8 -#define R_M32R_LO16 9 -#define R_M32R_SDA16 10 -#define R_M32R_GNU_VTINHERIT 11 -#define R_M32R_GNU_VTENTRY 12 - -#define R_M32R_16_RELA 33 -#define R_M32R_32_RELA 34 -#define R_M32R_24_RELA 35 -#define R_M32R_10_PCREL_RELA 36 -#define R_M32R_18_PCREL_RELA 37 -#define R_M32R_26_PCREL_RELA 38 -#define R_M32R_HI16_ULO_RELA 39 -#define R_M32R_HI16_SLO_RELA 40 -#define R_M32R_LO16_RELA 41 -#define R_M32R_SDA16_RELA 42 -#define R_M32R_RELA_GNU_VTINHERIT 43 -#define R_M32R_RELA_GNU_VTENTRY 44 - -#define R_M32R_GOT24 48 -#define R_M32R_26_PLTREL 49 -#define R_M32R_COPY 50 -#define R_M32R_GLOB_DAT 51 -#define R_M32R_JMP_SLOT 52 -#define R_M32R_RELATIVE 53 -#define R_M32R_GOTOFF 54 -#define R_M32R_GOTPC24 55 -#define R_M32R_GOT16_HI_ULO 56 -#define R_M32R_GOT16_HI_SLO 57 -#define R_M32R_GOT16_LO 58 -#define R_M32R_GOTPC_HI_ULO 59 -#define R_M32R_GOTPC_HI_SLO 60 -#define R_M32R_GOTPC_LO 61 -#define R_M32R_GOTOFF_HI_ULO 62 -#define R_M32R_GOTOFF_HI_SLO 63 -#define R_M32R_GOTOFF_LO 64 - -#define R_M32R_NUM 256 - -/* - * ELF register definitions.. - */ -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) - -typedef unsigned long elf_greg_t; -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -/* We have no FP mumumu. */ -typedef double elf_fpreg_t; -typedef elf_fpreg_t elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) \ - (((x)->e_machine == EM_M32R) || ((x)->e_machine == EM_CYGNUS_M32R)) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#if defined(__LITTLE_ENDIAN) -#define ELF_DATA ELFDATA2LSB -#elif defined(__BIG_ENDIAN) -#define ELF_DATA ELFDATA2MSB -#else -#error no endian defined -#endif -#define ELF_ARCH EM_M32R - -/* r0 is set by ld.so to a pointer to a function which might be - * registered using 'atexit'. This provides a mean for the dynamic - * linker to call DT_FINI functions for shared libraries that have - * been loaded before the code runs. - * - * So that we can use the same startup file with static executables, - * we start programs with a value of 0 to indicate that there is no - * such function. - */ -#define ELF_PLAT_INIT(_r, load_addr) (_r)->r0 = 0 - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE PAGE_SIZE - -/* - * This is the location that an ET_DYN program is loaded if exec'ed. - * Typical use of this is to invoke "./ld.so someprog" to test out a - * new version of the loader. We need to make sure that it is out of - * the way of the program that it will "exec", and that there is - * sufficient room for the brk. - */ -#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) - -/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is - now struct_user_regs, they are different) */ - -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ - memcpy((char *)pr_reg, (char *)regs, sizeof (struct pt_regs)); - -/* This yields a mask that user programs can use to figure out what - instruction set this CPU supports. */ -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) - -#endif /* _ASM_M32R__ELF_H */ diff --git a/include/asm-m32r/emergency-restart.h b/include/asm-m32r/emergency-restart.h deleted file mode 100644 index 108d8c4..0000000 --- a/include/asm-m32r/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-m32r/errno.h b/include/asm-m32r/errno.h deleted file mode 100644 index 7771492..0000000 --- a/include/asm-m32r/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M32R_ERRNO_H -#define _ASM_M32R_ERRNO_H - -#include - -#endif /* _ASM_M32R_ERRNO_H */ diff --git a/include/asm-m32r/fb.h b/include/asm-m32r/fb.h deleted file mode 100644 index d92e99c..0000000 --- a/include/asm-m32r/fb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-m32r/fcntl.h b/include/asm-m32r/fcntl.h deleted file mode 100644 index 46ab12d..0000000 --- a/include/asm-m32r/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m32r/flat.h b/include/asm-m32r/flat.h deleted file mode 100644 index d851cf0..0000000 --- a/include/asm-m32r/flat.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * include/asm-m32r/flat.h - * - * uClinux flat-format executables - * - * Copyright (C) 2004 Kazuhiro Inaoka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive for - * more details. - */ -#ifndef __ASM_M32R_FLAT_H -#define __ASM_M32R_FLAT_H - -#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0)) -#define flat_argvp_envp_on_stack() 0 -#define flat_old_ram_flag(flags) (flags) -#define flat_set_persistent(relval, p) 0 -#define flat_reloc_valid(reloc, size) \ - (((reloc) - textlen_for_m32r_lo16_data) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) \ - m32r_flat_get_addr_from_rp(rp, relval, (text_len) ) - -#define flat_put_addr_at_rp(rp, addr, relval) \ - m32r_flat_put_addr_at_rp(rp, addr, relval) - -/* Convert a relocation entry into an address. */ -static inline unsigned long -flat_get_relocate_addr (unsigned long relval) -{ - return relval & 0x00ffffff; /* Mask out top 8-bits */ -} - -#define flat_m32r_get_reloc_type(relval) ((relval) >> 24) - -#define M32R_SETH_OPCODE 0xd0c00000 /* SETH instruction code */ - -#define FLAT_M32R_32 0x00 /* 32bits reloc */ -#define FLAT_M32R_24 0x01 /* unsigned 24bits reloc */ -#define FLAT_M32R_16 0x02 /* 16bits reloc */ -#define FLAT_M32R_LO16 0x03 /* signed low 16bits reloc (low()) */ -#define FLAT_M32R_LO16_DATA 0x04 /* signed low 16bits reloc (low()) - for a symbol in .data section */ - /* High 16bits of an address used - when the lower 16bbits are treated - as unsigned. - To create SETH instruction only. - 0x1X: X means a number of register. - 0x10 - 0x3F are reserved. */ -#define FLAT_M32R_HI16_ULO 0x10 /* reloc for SETH Rn,#high(imm16) */ - /* High 16bits of an address used - when the lower 16bbits are treated - as signed. - To create SETH instruction only. - 0x2X: X means a number of register. - 0x20 - 0x4F are reserved. */ -#define FLAT_M32R_HI16_SLO 0x20 /* reloc for SETH Rn,#shigh(imm16) */ - -static unsigned long textlen_for_m32r_lo16_data = 0; - -static inline unsigned long m32r_flat_get_addr_from_rp (unsigned long *rp, - unsigned long relval, - unsigned long textlen) -{ - unsigned int reloc = flat_m32r_get_reloc_type (relval); - textlen_for_m32r_lo16_data = 0; - if (reloc & 0xf0) { - unsigned long addr = htonl(*rp); - switch (reloc & 0xf0) - { - case FLAT_M32R_HI16_ULO: - case FLAT_M32R_HI16_SLO: - if (addr == 0) { - /* put "seth Rn,#0x0" instead of 0 (addr). */ - *rp = (M32R_SETH_OPCODE | ((reloc & 0x0f)<<24)); - } - return addr; - default: - break; - } - } else { - switch (reloc) - { - case FLAT_M32R_LO16: - return htonl(*rp) & 0xFFFF; - case FLAT_M32R_LO16_DATA: - /* FIXME: The return value will decrease by textlen - at m32r_flat_put_addr_at_rp () */ - textlen_for_m32r_lo16_data = textlen; - return (htonl(*rp) & 0xFFFF) + textlen; - case FLAT_M32R_16: - return htons(*(unsigned short *)rp) & 0xFFFF; - case FLAT_M32R_24: - return htonl(*rp) & 0xFFFFFF; - case FLAT_M32R_32: - return htonl(*rp); - default: - break; - } - } - return ~0; /* bogus value */ -} - -static inline void m32r_flat_put_addr_at_rp (unsigned long *rp, - unsigned long addr, - unsigned long relval) -{ - unsigned int reloc = flat_m32r_get_reloc_type (relval); - if (reloc & 0xf0) { - unsigned long Rn = reloc & 0x0f; /* get a number of register */ - Rn <<= 24; /* 0x0R000000 */ - reloc &= 0xf0; - switch (reloc) - { - case FLAT_M32R_HI16_ULO: /* To create SETH Rn,#high(imm16) */ - *rp = (M32R_SETH_OPCODE | Rn - | ((addr >> 16) & 0xFFFF)); - break; - case FLAT_M32R_HI16_SLO: /* To create SETH Rn,#shigh(imm16) */ - *rp = (M32R_SETH_OPCODE | Rn - | (((addr >> 16) + ((addr & 0x8000) ? 1 : 0)) - & 0xFFFF)); - break; - } - } else { - switch (reloc) { - case FLAT_M32R_LO16_DATA: - addr -= textlen_for_m32r_lo16_data; - textlen_for_m32r_lo16_data = 0; - case FLAT_M32R_LO16: - *rp = (htonl(*rp) & 0xFFFF0000) | (addr & 0xFFFF); - break; - case FLAT_M32R_16: - *(unsigned short *)rp = addr & 0xFFFF; - break; - case FLAT_M32R_24: - *rp = (htonl(*rp) & 0xFF000000) | (addr & 0xFFFFFF); - break; - case FLAT_M32R_32: - *rp = addr; - break; - } - } -} - -#endif /* __ASM_M32R_FLAT_H */ diff --git a/include/asm-m32r/futex.h b/include/asm-m32r/futex.h deleted file mode 100644 index 6a332a9..0000000 --- a/include/asm-m32r/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/include/asm-m32r/hardirq.h b/include/asm-m32r/hardirq.h deleted file mode 100644 index cb8aa76..0000000 --- a/include/asm-m32r/hardirq.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifdef __KERNEL__ -#ifndef __ASM_HARDIRQ_H -#define __ASM_HARDIRQ_H - -#include -#include - -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#if NR_IRQS > 256 -#define HARDIRQ_BITS 9 -#else -#define HARDIRQ_BITS 8 -#endif - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -static inline void ack_bad_irq(int irq) -{ - printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq); - BUG(); -} - -#endif /* __ASM_HARDIRQ_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-m32r/hw_irq.h b/include/asm-m32r/hw_irq.h deleted file mode 100644 index 7138537..0000000 --- a/include/asm-m32r/hw_irq.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_M32R_HW_IRQ_H -#define _ASM_M32R_HW_IRQ_H - -#endif /* _ASM_M32R_HW_IRQ_H */ diff --git a/include/asm-m32r/io.h b/include/asm-m32r/io.h deleted file mode 100644 index d06933b..0000000 --- a/include/asm-m32r/io.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef _ASM_M32R_IO_H -#define _ASM_M32R_IO_H - -#include -#include -#include /* __va */ - -#ifdef __KERNEL__ - -#define IO_SPACE_LIMIT 0xFFFFFFFF - -/** - * virt_to_phys - map virtual addresses to physical - * @address: address to remap - * - * The returned physical address is the physical (CPU) mapping for - * the memory address given. It is only valid to use this function on - * addresses directly mapped or allocated via kmalloc. - * - * This function does not give bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ - -static inline unsigned long virt_to_phys(volatile void * address) -{ - return __pa(address); -} - -/** - * phys_to_virt - map physical address to virtual - * @address: address to remap - * - * The returned virtual address is a current CPU mapping for - * the memory address given. It is only valid to use this function on - * addresses that have a kernel mapping - * - * This function does not handle bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ - -static inline void *phys_to_virt(unsigned long address) -{ - return __va(address); -} - -extern void __iomem * -__ioremap(unsigned long offset, unsigned long size, unsigned long flags); - -/** - * ioremap - map bus memory into CPU space - * @offset: bus address of the memory - * @size: size of the resource to map - * - * ioremap performs a platform specific sequence of operations to - * make bus memory CPU accessible via the readb/readw/readl/writeb/ - * writew/writel functions and the other mmio helpers. The returned - * address is not guaranteed to be usable directly as a virtual - * address. - */ - -static inline void __iomem *ioremap(unsigned long offset, unsigned long size) -{ - return __ioremap(offset, size, 0); -} - -extern void iounmap(volatile void __iomem *addr); -#define ioremap_nocache(off,size) ioremap(off,size) - -/* - * IO bus memory addresses are also 1:1 with the physical address - */ -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) -#define page_to_bus page_to_phys -#define virt_to_bus virt_to_phys - -extern unsigned char _inb(unsigned long); -extern unsigned short _inw(unsigned long); -extern unsigned long _inl(unsigned long); -extern unsigned char _inb_p(unsigned long); -extern unsigned short _inw_p(unsigned long); -extern unsigned long _inl_p(unsigned long); -extern void _outb(unsigned char, unsigned long); -extern void _outw(unsigned short, unsigned long); -extern void _outl(unsigned long, unsigned long); -extern void _outb_p(unsigned char, unsigned long); -extern void _outw_p(unsigned short, unsigned long); -extern void _outl_p(unsigned long, unsigned long); -extern void _insb(unsigned int, void *, unsigned long); -extern void _insw(unsigned int, void *, unsigned long); -extern void _insl(unsigned int, void *, unsigned long); -extern void _outsb(unsigned int, const void *, unsigned long); -extern void _outsw(unsigned int, const void *, unsigned long); -extern void _outsl(unsigned int, const void *, unsigned long); - -static inline unsigned char _readb(unsigned long addr) -{ - return *(volatile unsigned char __force *)addr; -} - -static inline unsigned short _readw(unsigned long addr) -{ - return *(volatile unsigned short __force *)addr; -} - -static inline unsigned long _readl(unsigned long addr) -{ - return *(volatile unsigned long __force *)addr; -} - -static inline void _writeb(unsigned char b, unsigned long addr) -{ - *(volatile unsigned char __force *)addr = b; -} - -static inline void _writew(unsigned short w, unsigned long addr) -{ - *(volatile unsigned short __force *)addr = w; -} - -static inline void _writel(unsigned long l, unsigned long addr) -{ - *(volatile unsigned long __force *)addr = l; -} - -#define inb _inb -#define inw _inw -#define inl _inl -#define outb _outb -#define outw _outw -#define outl _outl - -#define inb_p _inb_p -#define inw_p _inw_p -#define inl_p _inl_p -#define outb_p _outb_p -#define outw_p _outw_p -#define outl_p _outl_p - -#define insb _insb -#define insw _insw -#define insl _insl -#define outsb _outsb -#define outsw _outsw -#define outsl _outsl - -#define readb(addr) _readb((unsigned long)(addr)) -#define readw(addr) _readw((unsigned long)(addr)) -#define readl(addr) _readl((unsigned long)(addr)) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - -#define writeb(val, addr) _writeb((val), (unsigned long)(addr)) -#define writew(val, addr) _writew((val), (unsigned long)(addr)) -#define writel(val, addr) _writel((val), (unsigned long)(addr)) -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -#define mmiowb() - -#define flush_write_buffers() do { } while (0) /* M32R_FIXME */ - -static inline void -memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - memset((void __force *) addr, val, count); -} - -static inline void -memcpy_fromio(void *dst, volatile void __iomem *src, int count) -{ - memcpy(dst, (void __force *) src, count); -} - -static inline void -memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - memcpy((void __force *) dst, src, count); -} - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* _ASM_M32R_IO_H */ diff --git a/include/asm-m32r/ioctl.h b/include/asm-m32r/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/include/asm-m32r/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m32r/ioctls.h b/include/asm-m32r/ioctls.h deleted file mode 100644 index b9f54bb..0000000 --- a/include/asm-m32r/ioctls.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef __ARCH_M32R_IOCTLS_H__ -#define __ARCH_M32R_IOCTLS_H__ - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ -#define FIOQSIZE 0x5460 - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* __ARCH_M32R_IOCTLS_H__ */ diff --git a/include/asm-m32r/ipcbuf.h b/include/asm-m32r/ipcbuf.h deleted file mode 100644 index 8d2d7c8..0000000 --- a/include/asm-m32r/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASM_M32R_IPCBUF_H -#define _ASM_M32R_IPCBUF_H - -/* - * The ipc64_perm structure for m32r architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_M32R_IPCBUF_H */ diff --git a/include/asm-m32r/irq.h b/include/asm-m32r/irq.h deleted file mode 100644 index 242028b..0000000 --- a/include/asm-m32r/irq.h +++ /dev/null @@ -1,90 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_M32R_IRQ_H -#define _ASM_M32R_IRQ_H - - -#if defined(CONFIG_PLAT_USRV) -/* - * IRQ definitions for M32700UT - * M32700 Chip: 64 interrupts - * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin - */ -#define M32700UT_NUM_CPU_IRQ (64) -#define M32700UT_NUM_PLD_IRQ (32) -#define M32700UT_IRQ_BASE 0 -#define M32700UT_CPU_IRQ_BASE M32700UT_IRQ_BASE -#define M32700UT_PLD_IRQ_BASE (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ) - -#define NR_IRQS (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ) -#elif defined(CONFIG_PLAT_M32700UT) -/* - * IRQ definitions for M32700UT(Rev.C) + M32R-LAN - * M32700 Chip: 64 interrupts - * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin - * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin - * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin - */ -#define M32700UT_NUM_CPU_IRQ (64) -#define M32700UT_NUM_PLD_IRQ (32) -#define M32700UT_NUM_LCD_PLD_IRQ (32) -#define M32700UT_NUM_LAN_PLD_IRQ (32) -#define M32700UT_IRQ_BASE 0 -#define M32700UT_CPU_IRQ_BASE (M32700UT_IRQ_BASE) -#define M32700UT_PLD_IRQ_BASE \ - (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ) -#define M32700UT_LCD_PLD_IRQ_BASE \ - (M32700UT_PLD_IRQ_BASE + M32700UT_NUM_PLD_IRQ) -#define M32700UT_LAN_PLD_IRQ_BASE \ - (M32700UT_LCD_PLD_IRQ_BASE + M32700UT_NUM_LCD_PLD_IRQ) - -#define NR_IRQS \ - (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ \ - + M32700UT_NUM_LCD_PLD_IRQ + M32700UT_NUM_LAN_PLD_IRQ) -#elif defined(CONFIG_PLAT_OPSPUT) -/* - * IRQ definitions for OPSPUT + M32R-LAN - * OPSP Chip: 64 interrupts - * ICU of OPSPUT-on-board PLD: 32 interrupts cascaded to INT1# chip pin - * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin - * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin - */ -#define OPSPUT_NUM_CPU_IRQ (64) -#define OPSPUT_NUM_PLD_IRQ (32) -#define OPSPUT_NUM_LCD_PLD_IRQ (32) -#define OPSPUT_NUM_LAN_PLD_IRQ (32) -#define OPSPUT_IRQ_BASE 0 -#define OPSPUT_CPU_IRQ_BASE (OPSPUT_IRQ_BASE) -#define OPSPUT_PLD_IRQ_BASE \ - (OPSPUT_CPU_IRQ_BASE + OPSPUT_NUM_CPU_IRQ) -#define OPSPUT_LCD_PLD_IRQ_BASE \ - (OPSPUT_PLD_IRQ_BASE + OPSPUT_NUM_PLD_IRQ) -#define OPSPUT_LAN_PLD_IRQ_BASE \ - (OPSPUT_LCD_PLD_IRQ_BASE + OPSPUT_NUM_LCD_PLD_IRQ) - -#define NR_IRQS \ - (OPSPUT_NUM_CPU_IRQ + OPSPUT_NUM_PLD_IRQ \ - + OPSPUT_NUM_LCD_PLD_IRQ + OPSPUT_NUM_LAN_PLD_IRQ) - -#elif defined(CONFIG_PLAT_M32104UT) -/* - * IRQ definitions for M32104UT - * M32104 Chip: 64 interrupts - * ICU of M32104UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin - */ -#define M32104UT_NUM_CPU_IRQ (64) -#define M32104UT_NUM_PLD_IRQ (32) -#define M32104UT_IRQ_BASE 0 -#define M32104UT_CPU_IRQ_BASE M32104UT_IRQ_BASE -#define M32104UT_PLD_IRQ_BASE (M32104UT_CPU_IRQ_BASE + M32104UT_NUM_CPU_IRQ) - -#define NR_IRQS \ - (M32104UT_NUM_CPU_IRQ + M32104UT_NUM_PLD_IRQ) - -#else -#define NR_IRQS 64 -#endif - -#define irq_canonicalize(irq) (irq) - -#endif /* _ASM_M32R_IRQ_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-m32r/irq_regs.h b/include/asm-m32r/irq_regs.h deleted file mode 100644 index 3dd9c0b..0000000 --- a/include/asm-m32r/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m32r/kdebug.h b/include/asm-m32r/kdebug.h deleted file mode 100644 index 6ece1b0..0000000 --- a/include/asm-m32r/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m32r/kmap_types.h b/include/asm-m32r/kmap_types.h deleted file mode 100644 index fa94dc6..0000000 --- a/include/asm-m32r/kmap_types.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __M32R_KMAP_TYPES_H -#define __M32R_KMAP_TYPES_H - -#ifdef CONFIG_DEBUG_HIGHMEM -# define D(n) __KM_FENCE_##n , -#else -# define D(n) -#endif - -enum km_type { -D(0) KM_BOUNCE_READ, -D(1) KM_SKB_SUNRPC_DATA, -D(2) KM_SKB_DATA_SOFTIRQ, -D(3) KM_USER0, -D(4) KM_USER1, -D(5) KM_BIO_SRC_IRQ, -D(6) KM_BIO_DST_IRQ, -D(7) KM_PTE0, -D(8) KM_PTE1, -D(9) KM_IRQ0, -D(10) KM_IRQ1, -D(11) KM_SOFTIRQ0, -D(12) KM_SOFTIRQ1, -D(13) KM_TYPE_NR -}; - -#undef D - -#endif /* __M32R_KMAP_TYPES_H */ diff --git a/include/asm-m32r/linkage.h b/include/asm-m32r/linkage.h deleted file mode 100644 index a9fb151..0000000 --- a/include/asm-m32r/linkage.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .balign 4 -#define __ALIGN_STR ".balign 4" - -#endif /* __ASM_LINKAGE_H */ diff --git a/include/asm-m32r/local.h b/include/asm-m32r/local.h deleted file mode 100644 index 22256d1..0000000 --- a/include/asm-m32r/local.h +++ /dev/null @@ -1,366 +0,0 @@ -#ifndef __M32R_LOCAL_H -#define __M32R_LOCAL_H - -/* - * linux/include/asm-m32r/local.h - * - * M32R version: - * Copyright (C) 2001, 2002 Hitoshi Yamamoto - * Copyright (C) 2004 Hirokazu Takata - * Copyright (C) 2007 Mathieu Desnoyers - */ - -#include -#include -#include -#include - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -/* - * Make sure gcc doesn't try to be clever and move things around - * on us. We need to use _exactly_ the address the user gave us, - * not some alias that contains the same information. - */ -typedef struct { volatile int counter; } local_t; - -#define LOCAL_INIT(i) { (i) } - -/** - * local_read - read local variable - * @l: pointer of type local_t - * - * Atomically reads the value of @l. - */ -#define local_read(l) ((l)->counter) - -/** - * local_set - set local variable - * @l: pointer of type local_t - * @i: required value - * - * Atomically sets the value of @l to @i. - */ -#define local_set(l, i) (((l)->counter) = (i)) - -/** - * local_add_return - add long to local variable and return it - * @i: long value to add - * @l: pointer of type local_t - * - * Atomically adds @i to @l and return (@i + @l). - */ -static inline long local_add_return(long i, local_t *l) -{ - unsigned long flags; - long result; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# local_add_return \n\t" - DCACHE_CLEAR("%0", "r4", "%1") - "ld %0, @%1; \n\t" - "add %0, %2; \n\t" - "st %0, @%1; \n\t" - : "=&r" (result) - : "r" (&l->counter), "r" (i) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return result; -} - -/** - * local_sub_return - subtract long from local variable and return it - * @i: long value to subtract - * @l: pointer of type local_t - * - * Atomically subtracts @i from @l and return (@l - @i). - */ -static inline long local_sub_return(long i, local_t *l) -{ - unsigned long flags; - long result; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# local_sub_return \n\t" - DCACHE_CLEAR("%0", "r4", "%1") - "ld %0, @%1; \n\t" - "sub %0, %2; \n\t" - "st %0, @%1; \n\t" - : "=&r" (result) - : "r" (&l->counter), "r" (i) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return result; -} - -/** - * local_add - add long to local variable - * @i: long value to add - * @l: pointer of type local_t - * - * Atomically adds @i to @l. - */ -#define local_add(i, l) ((void) local_add_return((i), (l))) - -/** - * local_sub - subtract the local variable - * @i: long value to subtract - * @l: pointer of type local_t - * - * Atomically subtracts @i from @l. - */ -#define local_sub(i, l) ((void) local_sub_return((i), (l))) - -/** - * local_sub_and_test - subtract value from variable and test result - * @i: integer value to subtract - * @l: pointer of type local_t - * - * Atomically subtracts @i from @l and returns - * true if the result is zero, or false for all - * other cases. - */ -#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0) - -/** - * local_inc_return - increment local variable and return it - * @l: pointer of type local_t - * - * Atomically increments @l by 1 and returns the result. - */ -static inline long local_inc_return(local_t *l) -{ - unsigned long flags; - long result; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# local_inc_return \n\t" - DCACHE_CLEAR("%0", "r4", "%1") - "ld %0, @%1; \n\t" - "addi %0, #1; \n\t" - "st %0, @%1; \n\t" - : "=&r" (result) - : "r" (&l->counter) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return result; -} - -/** - * local_dec_return - decrement local variable and return it - * @l: pointer of type local_t - * - * Atomically decrements @l by 1 and returns the result. - */ -static inline long local_dec_return(local_t *l) -{ - unsigned long flags; - long result; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# local_dec_return \n\t" - DCACHE_CLEAR("%0", "r4", "%1") - "ld %0, @%1; \n\t" - "addi %0, #-1; \n\t" - "st %0, @%1; \n\t" - : "=&r" (result) - : "r" (&l->counter) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return result; -} - -/** - * local_inc - increment local variable - * @l: pointer of type local_t - * - * Atomically increments @l by 1. - */ -#define local_inc(l) ((void)local_inc_return(l)) - -/** - * local_dec - decrement local variable - * @l: pointer of type local_t - * - * Atomically decrements @l by 1. - */ -#define local_dec(l) ((void)local_dec_return(l)) - -/** - * local_inc_and_test - increment and test - * @l: pointer of type local_t - * - * Atomically increments @l by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define local_inc_and_test(l) (local_inc_return(l) == 0) - -/** - * local_dec_and_test - decrement and test - * @l: pointer of type local_t - * - * Atomically decrements @l by 1 and - * returns true if the result is 0, or false for all - * other cases. - */ -#define local_dec_and_test(l) (local_dec_return(l) == 0) - -/** - * local_add_negative - add and test if negative - * @l: pointer of type local_t - * @i: integer value to add - * - * Atomically adds @i to @l and returns true - * if the result is negative, or false when - * result is greater than or equal to zero. - */ -#define local_add_negative(i, l) (local_add_return((i), (l)) < 0) - -#define local_cmpxchg(l, o, n) (cmpxchg_local(&((l)->counter), (o), (n))) -#define local_xchg(v, new) (xchg_local(&((l)->counter), new)) - -/** - * local_add_unless - add unless the number is a given value - * @l: pointer of type local_t - * @a: the amount to add to l... - * @u: ...unless l is equal to u. - * - * Atomically adds @a to @l, so long as it was not @u. - * Returns non-zero if @l was not @u, and zero otherwise. - */ -static inline int local_add_unless(local_t *l, long a, long u) -{ - long c, old; - c = local_read(l); - for (;;) { - if (unlikely(c == (u))) - break; - old = local_cmpxchg((l), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define local_inc_not_zero(l) local_add_unless((l), 1, 0) - -static inline void local_clear_mask(unsigned long mask, local_t *addr) -{ - unsigned long flags; - unsigned long tmp; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# local_clear_mask \n\t" - DCACHE_CLEAR("%0", "r5", "%1") - "ld %0, @%1; \n\t" - "and %0, %2; \n\t" - "st %0, @%1; \n\t" - : "=&r" (tmp) - : "r" (addr), "r" (~mask) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r5" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); -} - -static inline void local_set_mask(unsigned long mask, local_t *addr) -{ - unsigned long flags; - unsigned long tmp; - - local_irq_save(flags); - __asm__ __volatile__ ( - "# local_set_mask \n\t" - DCACHE_CLEAR("%0", "r5", "%1") - "ld %0, @%1; \n\t" - "or %0, %2; \n\t" - "st %0, @%1; \n\t" - : "=&r" (tmp) - : "r" (addr), "r" (mask) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r5" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); -} - -/* Atomic operations are already serializing on m32r */ -#define smp_mb__before_local_dec() barrier() -#define smp_mb__after_local_dec() barrier() -#define smp_mb__before_local_inc() barrier() -#define smp_mb__after_local_inc() barrier() - -/* Use these for per-cpu local_t variables: on some archs they are - * much more efficient than these naive implementations. Note they take - * a variable, not an address. - */ - -#define __local_inc(l) ((l)->a.counter++) -#define __local_dec(l) ((l)->a.counter++) -#define __local_add(i, l) ((l)->a.counter += (i)) -#define __local_sub(i, l) ((l)->a.counter -= (i)) - -/* Use these for per-cpu local_t variables: on some archs they are - * much more efficient than these naive implementations. Note they take - * a variable, not an address. - */ - -/* Need to disable preemption for the cpu local counters otherwise we could - still access a variable of a previous CPU in a non local way. */ -#define cpu_local_wrap_v(l) \ - ({ local_t res__; \ - preempt_disable(); \ - res__ = (l); \ - preempt_enable(); \ - res__; }) -#define cpu_local_wrap(l) \ - ({ preempt_disable(); \ - l; \ - preempt_enable(); }) \ - -#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) -#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) -#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) -#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) -#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) -#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) - -#define __cpu_local_inc(l) cpu_local_inc(l) -#define __cpu_local_dec(l) cpu_local_dec(l) -#define __cpu_local_add(i, l) cpu_local_add((i), (l)) -#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) - -#endif /* __M32R_LOCAL_H */ diff --git a/include/asm-m32r/m32102.h b/include/asm-m32r/m32102.h deleted file mode 100644 index 52807f8..0000000 --- a/include/asm-m32r/m32102.h +++ /dev/null @@ -1,314 +0,0 @@ -#ifndef _M32102_H_ -#define _M32102_H_ - -/* - * Renesas M32R 32102 group - * - * Copyright (c) 2001 Hitoshi Yamamoto - * Copyright (c) 2003, 2004 Renesas Technology Corp. - */ - -/*======================================================================* - * Special Function Register - *======================================================================*/ -#if !defined(CONFIG_CHIP_M32104) -#define M32R_SFR_OFFSET (0x00E00000) /* 0x00E00000-0x00EFFFFF 1[MB] */ -#else -#define M32R_SFR_OFFSET (0x00700000) /* 0x00700000-0x007FFFFF 1[MB] */ -#endif - -/* - * Clock and Power Management registers. - */ -#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET) - -#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET) -#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET) -#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET) - -/* - * DMA Controller registers. - */ -#define M32R_DMA_OFFSET (0x000F8000+M32R_SFR_OFFSET) - -#define M32R_DMAEN_PORTL (0x000+M32R_DMA_OFFSET) -#define M32R_DMAISTS_PORTL (0x004+M32R_DMA_OFFSET) -#define M32R_DMAEDET_PORTL (0x008+M32R_DMA_OFFSET) -#define M32R_DMAASTS_PORTL (0x00c+M32R_DMA_OFFSET) - -#define M32R_DMA0CR0_PORTL (0x100+M32R_DMA_OFFSET) -#define M32R_DMA0CR1_PORTL (0x104+M32R_DMA_OFFSET) -#define M32R_DMA0CSA_PORTL (0x108+M32R_DMA_OFFSET) -#define M32R_DMA0RSA_PORTL (0x10c+M32R_DMA_OFFSET) -#define M32R_DMA0CDA_PORTL (0x110+M32R_DMA_OFFSET) -#define M32R_DMA0RDA_PORTL (0x114+M32R_DMA_OFFSET) -#define M32R_DMA0CBCUT_PORTL (0x118+M32R_DMA_OFFSET) -#define M32R_DMA0RBCUT_PORTL (0x11c+M32R_DMA_OFFSET) - -#define M32R_DMA1CR0_PORTL (0x200+M32R_DMA_OFFSET) -#define M32R_DMA1CR1_PORTL (0x204+M32R_DMA_OFFSET) -#define M32R_DMA1CSA_PORTL (0x208+M32R_DMA_OFFSET) -#define M32R_DMA1RSA_PORTL (0x20c+M32R_DMA_OFFSET) -#define M32R_DMA1CDA_PORTL (0x210+M32R_DMA_OFFSET) -#define M32R_DMA1RDA_PORTL (0x214+M32R_DMA_OFFSET) -#define M32R_DMA1CBCUT_PORTL (0x218+M32R_DMA_OFFSET) -#define M32R_DMA1RBCUT_PORTL (0x21c+M32R_DMA_OFFSET) - -/* - * Multi Function Timer registers. - */ -#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET) - -#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */ -#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */ - -#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET) -#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */ -#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */ -#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */ -#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */ -#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */ - -#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET) -#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */ -#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */ -#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */ -#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */ -#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */ - -#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET) -#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */ -#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */ -#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */ -#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */ -#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */ - -#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET) -#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */ -#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */ -#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */ -#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */ -#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */ - -#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET) -#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */ -#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */ -#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */ -#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */ -#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */ - -#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET) -#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */ -#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */ -#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */ -#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */ -#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */ - -#if (defined(CONFIG_CHIP_M32700) && !defined(CONFIG_PLAT_MAPPI2)) \ - || defined(CONFIG_CHIP_M32104) -#define M32R_MFTCR_MFT0MSK (1UL<<31) /* b0 */ -#define M32R_MFTCR_MFT1MSK (1UL<<30) /* b1 */ -#define M32R_MFTCR_MFT2MSK (1UL<<29) /* b2 */ -#define M32R_MFTCR_MFT3MSK (1UL<<28) /* b3 */ -#define M32R_MFTCR_MFT4MSK (1UL<<27) /* b4 */ -#define M32R_MFTCR_MFT5MSK (1UL<<26) /* b5 */ -#define M32R_MFTCR_MFT0EN (1UL<<23) /* b8 */ -#define M32R_MFTCR_MFT1EN (1UL<<22) /* b9 */ -#define M32R_MFTCR_MFT2EN (1UL<<21) /* b10 */ -#define M32R_MFTCR_MFT3EN (1UL<<20) /* b11 */ -#define M32R_MFTCR_MFT4EN (1UL<<19) /* b12 */ -#define M32R_MFTCR_MFT5EN (1UL<<18) /* b13 */ -#else -#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */ -#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */ -#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */ -#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */ -#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */ -#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */ -#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */ -#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */ -#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */ -#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */ -#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */ -#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */ -#endif - -#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */ -#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */ -#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */ -#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */ -#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */ -#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */ -#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */ -#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */ -#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */ -#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */ -#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */ -#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */ -#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */ -#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */ -#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */ - -/* - * Serial I/O registers. - */ -#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET) - -#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET) -#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET) -#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET) -#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET) -#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET) -#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET) -#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET) -#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET) -#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET) - -/* - * Interrupt Control Unit registers. - */ -#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET) -#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET) -#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET) -#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET) -#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET) -#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET) -#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */ -#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */ -#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */ -#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */ -#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */ -#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */ -#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */ -#define M32R_ICU_CR8_PORTL (0x219+M32R_ICU_OFFSET) /* INT7 */ -#define M32R_ICU_CR16_PORTL (0x23C+M32R_ICU_OFFSET) /* MFT0 */ -#define M32R_ICU_CR17_PORTL (0x240+M32R_ICU_OFFSET) /* MFT1 */ -#define M32R_ICU_CR18_PORTL (0x244+M32R_ICU_OFFSET) /* MFT2 */ -#define M32R_ICU_CR19_PORTL (0x248+M32R_ICU_OFFSET) /* MFT3 */ -#define M32R_ICU_CR20_PORTL (0x24C+M32R_ICU_OFFSET) /* MFT4 */ -#define M32R_ICU_CR21_PORTL (0x250+M32R_ICU_OFFSET) /* MFT5 */ -#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* DMA0 */ -#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* DMA1 */ -#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* SIO0 */ -#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* SIO0 */ -#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* SIO1 */ -#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* SIO1 */ -#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* SIO2 */ -#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* SIO2 */ -#define M32R_ICU_CR54_PORTL (0x2D4+M32R_ICU_OFFSET) /* SIO3 */ -#define M32R_ICU_CR55_PORTL (0x2D8+M32R_ICU_OFFSET) /* SIO3 */ -#define M32R_ICU_CR56_PORTL (0x2DC+M32R_ICU_OFFSET) /* SIO4 */ -#define M32R_ICU_CR57_PORTL (0x2E0+M32R_ICU_OFFSET) /* SIO4 */ - -#ifdef CONFIG_SMP -#define M32R_ICU_IPICR0_PORTL (0x2dc+M32R_ICU_OFFSET) /* IPI0 */ -#define M32R_ICU_IPICR1_PORTL (0x2e0+M32R_ICU_OFFSET) /* IPI1 */ -#define M32R_ICU_IPICR2_PORTL (0x2e4+M32R_ICU_OFFSET) /* IPI2 */ -#define M32R_ICU_IPICR3_PORTL (0x2e8+M32R_ICU_OFFSET) /* IPI3 */ -#define M32R_ICU_IPICR4_PORTL (0x2ec+M32R_ICU_OFFSET) /* IPI4 */ -#define M32R_ICU_IPICR5_PORTL (0x2f0+M32R_ICU_OFFSET) /* IPI5 */ -#define M32R_ICU_IPICR6_PORTL (0x2f4+M32R_ICU_OFFSET) /* IPI6 */ -#define M32R_ICU_IPICR7_PORTL (0x2f8+M32R_ICU_OFFSET) /* IPI7 */ -#endif /* CONFIG_SMP */ - -#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */ -#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */ -#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */ -#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */ -#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */ -#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */ -#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */ -#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */ - -#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */ -#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */ -#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */ -#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */ -#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/ -#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */ -#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */ -#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */ -#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */ -#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */ -#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */ -#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */ -#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */ -#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */ - -#define M32R_IRQ_INT0 (1) /* INT0 */ -#define M32R_IRQ_INT1 (2) /* INT1 */ -#define M32R_IRQ_INT2 (3) /* INT2 */ -#define M32R_IRQ_INT3 (4) /* INT3 */ -#define M32R_IRQ_INT4 (5) /* INT4 */ -#define M32R_IRQ_INT5 (6) /* INT5 */ -#define M32R_IRQ_INT6 (7) /* INT6 */ -#define M32R_IRQ_MFT0 (16) /* MFT0 */ -#define M32R_IRQ_MFT1 (17) /* MFT1 */ -#define M32R_IRQ_MFT2 (18) /* MFT2 */ -#define M32R_IRQ_MFT3 (19) /* MFT3 */ -#ifdef CONFIG_CHIP_M32104 -#define M32R_IRQ_MFTX0 (24) /* MFTX0 */ -#define M32R_IRQ_MFTX1 (25) /* MFTX1 */ -#define M32R_IRQ_DMA0 (32) /* DMA0 */ -#define M32R_IRQ_DMA1 (33) /* DMA1 */ -#define M32R_IRQ_DMA2 (34) /* DMA2 */ -#define M32R_IRQ_DMA3 (35) /* DMA3 */ -#define M32R_IRQ_SIO0_R (40) /* SIO0 send */ -#define M32R_IRQ_SIO0_S (41) /* SIO0 receive */ -#define M32R_IRQ_SIO1_R (42) /* SIO1 send */ -#define M32R_IRQ_SIO1_S (43) /* SIO1 receive */ -#define M32R_IRQ_SIO2_R (44) /* SIO2 send */ -#define M32R_IRQ_SIO2_S (45) /* SIO2 receive */ -#define M32R_IRQ_SIO3_R (46) /* SIO3 send */ -#define M32R_IRQ_SIO3_S (47) /* SIO3 receive */ -#define M32R_IRQ_ADC (56) /* ADC */ -#define M32R_IRQ_PC (57) /* PC */ -#else /* ! M32104 */ -#define M32R_IRQ_DMA0 (32) /* DMA0 */ -#define M32R_IRQ_DMA1 (33) /* DMA1 */ -#define M32R_IRQ_SIO0_R (48) /* SIO0 send */ -#define M32R_IRQ_SIO0_S (49) /* SIO0 receive */ -#define M32R_IRQ_SIO1_R (50) /* SIO1 send */ -#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */ -#define M32R_IRQ_SIO2_R (52) /* SIO2 send */ -#define M32R_IRQ_SIO2_S (53) /* SIO2 receive */ -#define M32R_IRQ_SIO3_R (54) /* SIO3 send */ -#define M32R_IRQ_SIO3_S (55) /* SIO3 receive */ -#define M32R_IRQ_SIO4_R (56) /* SIO4 send */ -#define M32R_IRQ_SIO4_S (57) /* SIO4 receive */ -#endif /* ! M32104 */ - -#ifdef CONFIG_SMP -#define M32R_IRQ_IPI0 (56) -#define M32R_IRQ_IPI1 (57) -#define M32R_IRQ_IPI2 (58) -#define M32R_IRQ_IPI3 (59) -#define M32R_IRQ_IPI4 (60) -#define M32R_IRQ_IPI5 (61) -#define M32R_IRQ_IPI6 (62) -#define M32R_IRQ_IPI7 (63) -#define M32R_CPUID_PORTL (0xffffffe0) - -#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET) - -#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP) -#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP) -#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP) -#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP) -#define M32R_FPGA_CPU_NAME3_PORTL (0x1c+M32R_FPGA_TOP) -#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP) -#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP) -#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP) -#define M32R_FPGA_MODEL_ID3_PORTL (0x2c+M32R_FPGA_TOP) -#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP) -#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP) - -#endif /* CONFIG_SMP */ - -#ifndef __ASSEMBLY__ -typedef struct { - unsigned long icucr; /* ICU Control Register */ -} icu_data_t; -#endif - -#endif /* _M32102_H_ */ diff --git a/include/asm-m32r/m32104ut/m32104ut_pld.h b/include/asm-m32r/m32104ut/m32104ut_pld.h deleted file mode 100644 index 2dc89d6..0000000 --- a/include/asm-m32r/m32104ut/m32104ut_pld.h +++ /dev/null @@ -1,161 +0,0 @@ -#ifndef _M32104UT_M32104UT_PLD_H -#define _M32104UT_M32104UT_PLD_H - -/* - * include/asm-m32r/m32104ut/m32104ut_pld.h - * - * Definitions for Programable Logic Device(PLD) on M32104UT board. - * Based on m32700ut_pld.h - * - * Copyright (c) 2002 Takeo Takahashi - * Copyright (c) 2005 Naoto Sugai - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#if defined(CONFIG_PLAT_M32104UT) -#define PLD_PLAT_BASE 0x02c00000 -#else -#error "no platform configuration" -#endif - -#ifndef __ASSEMBLY__ -/* - * C functions use non-cache address. - */ -#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) -#define __reg8 (volatile unsigned char *) -#define __reg16 (volatile unsigned short *) -#define __reg32 (volatile unsigned int *) -#else -#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) -#define __reg8 -#define __reg16 -#define __reg32 -#endif /* __ASSEMBLY__ */ - -/* CFC */ -#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) -#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) -#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) -#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) - -/* MMC */ -#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) -#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) -#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) -#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) -#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) -#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) -#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) -#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) -#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) -#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) -#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) -#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) - -/* ICU - * ICUISTS: status register - * ICUIREQ0: request register - * ICUIREQ1: request register - * ICUCR3: control register for CFIREQ# interrupt - * ICUCR4: control register for CFC Card insert interrupt - * ICUCR5: control register for CFC Card eject interrupt - * ICUCR6: control register for external interrupt - * ICUCR11: control register for MMC Card insert/eject interrupt - * ICUCR13: control register for SC error interrupt - * ICUCR14: control register for SC receive interrupt - * ICUCR15: control register for SC send interrupt - */ - -#define PLD_IRQ_INT0 (M32104UT_PLD_IRQ_BASE + 0) /* None */ -#define PLD_IRQ_CFIREQ (M32104UT_PLD_IRQ_BASE + 3) /* CF IREQ */ -#define PLD_IRQ_CFC_INSERT (M32104UT_PLD_IRQ_BASE + 4) /* CF Insert */ -#define PLD_IRQ_CFC_EJECT (M32104UT_PLD_IRQ_BASE + 5) /* CF Eject */ -#define PLD_IRQ_EXINT (M32104UT_PLD_IRQ_BASE + 6) /* EXINT */ -#define PLD_IRQ_MMCCARD (M32104UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ -#define PLD_IRQ_SC_ERROR (M32104UT_PLD_IRQ_BASE + 13) /* SC error */ -#define PLD_IRQ_SC_RCV (M32104UT_PLD_IRQ_BASE + 14) /* SC receive */ -#define PLD_IRQ_SC_SND (M32104UT_PLD_IRQ_BASE + 15) /* SC send */ - -#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) -#define PLD_ICUISTS_VECB_MASK (0xf000) -#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) -#define PLD_ICUISTS_ISN_MASK (0x07c0) -#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) -#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) -#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) -#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) -#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) -#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) -#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) -#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) -#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) -#define PLD_ICUCR_IEN (0x1000) -#define PLD_ICUCR_IREQ (0x0100) -#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ -#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ -#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ -#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ -#define PLD_ICUCR_ILEVEL0 (0x0000) -#define PLD_ICUCR_ILEVEL1 (0x0001) -#define PLD_ICUCR_ILEVEL2 (0x0002) -#define PLD_ICUCR_ILEVEL3 (0x0003) -#define PLD_ICUCR_ILEVEL4 (0x0004) -#define PLD_ICUCR_ILEVEL5 (0x0005) -#define PLD_ICUCR_ILEVEL6 (0x0006) -#define PLD_ICUCR_ILEVEL7 (0x0007) - -/* Power Control of MMC and CF */ -#define PLD_CPCR __reg16(PLD_BASE + 0x14000) -#define PLD_CPCR_CDP 0x0001 - -/* LED Control - * - * 1: DIP swich side - * 2: Reset switch side - */ -#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) -#define PLD_IOLED_1_ON 0x001 -#define PLD_IOLED_1_OFF 0x000 -#define PLD_IOLED_2_ON 0x002 -#define PLD_IOLED_2_OFF 0x000 - -/* DIP Switch - * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) - * 1: - - * 2: - - * 3: - - */ -#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) -#define PLD_IOSWSTS_IOSW2 0x0200 -#define PLD_IOSWSTS_IOSW1 0x0100 -#define PLD_IOSWSTS_IOWP0 0x0001 - -/* CRC */ -#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) -#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) -#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) -#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) -#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) -#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) - -/* RTC */ -#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) -#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) -#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) -#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) -#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) - -/* SIM Card */ -#define PLD_SCCR __reg16(PLD_BASE + 0x38000) -#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) -#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) -#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) -#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) -#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) -#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) - -#endif /* _M32104UT_M32104UT_PLD_H */ diff --git a/include/asm-m32r/m32700ut/m32700ut_lan.h b/include/asm-m32r/m32700ut/m32700ut_lan.h deleted file mode 100644 index aae810a..0000000 --- a/include/asm-m32r/m32700ut/m32700ut_lan.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef _M32700UT_M32700UT_LAN_H -#define _M32700UT_M32700UT_LAN_H - -/* - * include/asm-m32r/m32700ut/m32700ut_lan.h - * - * M32700UT-LAN board - * - * Copyright (c) 2002 Takeo Takahashi - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef __ASSEMBLY__ -/* - * C functions use non-cache address. - */ -#define M32700UT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */) -#else -#define M32700UT_LAN_BASE (0x10000000 + NONCACHE_OFFSET) -#endif /* __ASSEMBLY__ */ - -/* ICU - * ICUISTS: status register - * ICUIREQ0: request register - * ICUIREQ1: request register - * ICUCR3: control register for CFIREQ# interrupt - * ICUCR4: control register for CFC Card insert interrupt - * ICUCR5: control register for CFC Card eject interrupt - * ICUCR6: control register for external interrupt - * ICUCR11: control register for MMC Card insert/eject interrupt - * ICUCR13: control register for SC error interrupt - * ICUCR14: control register for SC receive interrupt - * ICUCR15: control register for SC send interrupt - * ICUCR16: control register for SIO0 receive interrupt - * ICUCR17: control register for SIO0 send interrupt - */ -#define M32700UT_LAN_IRQ_LAN (M32700UT_LAN_PLD_IRQ_BASE + 1) /* LAN */ -#define M32700UT_LAN_IRQ_I2C (M32700UT_LAN_PLD_IRQ_BASE + 3) /* I2C */ - -#define M32700UT_LAN_ICUISTS __reg16(M32700UT_LAN_BASE + 0xc0002) -#define M32700UT_LAN_ICUISTS_VECB_MASK (0xf000) -#define M32700UT_LAN_VECB(x) ((x) & M32700UT_LAN_ICUISTS_VECB_MASK) -#define M32700UT_LAN_ICUISTS_ISN_MASK (0x07c0) -#define M32700UT_LAN_ICUISTS_ISN(x) ((x) & M32700UT_LAN_ICUISTS_ISN_MASK) -#define M32700UT_LAN_ICUIREQ0 __reg16(M32700UT_LAN_BASE + 0xc0004) -#define M32700UT_LAN_ICUCR1 __reg16(M32700UT_LAN_BASE + 0xc0010) -#define M32700UT_LAN_ICUCR3 __reg16(M32700UT_LAN_BASE + 0xc0014) - -/* - * AR register on PLD - */ -#define ARVCR0 __reg32(M32700UT_LAN_BASE + 0x40000) -#define ARVCR0_VDS 0x00080000 -#define ARVCR0_RST 0x00010000 -#define ARVCR1 __reg32(M32700UT_LAN_BASE + 0x40004) -#define ARVCR1_QVGA 0x02000000 -#define ARVCR1_NORMAL 0x01000000 -#define ARVCR1_HIEN 0x00010000 -#define ARVHCOUNT __reg32(M32700UT_LAN_BASE + 0x40008) -#define ARDATA __reg32(M32700UT_LAN_BASE + 0x40010) -#define ARINTSEL __reg32(M32700UT_LAN_BASE + 0x40014) -#define ARINTSEL_INT3 0x10000000 /* CPU INT3 */ -#define ARDATA32 __reg32(M32700UT_LAN_BASE + 0x04040010) // Block 5 -/* -#define ARINTSEL_SEL2 0x00002000 -#define ARINTSEL_SEL3 0x00001000 -#define ARINTSEL_SEL6 0x00000200 -#define ARINTSEL_SEL7 0x00000100 -#define ARINTSEL_SEL9 0x00000040 -#define ARINTSEL_SEL10 0x00000020 -#define ARINTSEL_SEL11 0x00000010 -#define ARINTSEL_SEL12 0x00000008 -*/ - -/* - * I2C register on PLD - */ -#define PLDI2CCR __reg32(M32700UT_LAN_BASE + 0x40040) -#define PLDI2CCR_ES0 0x00000001 /* enable I2C interface */ -#define PLDI2CMOD __reg32(M32700UT_LAN_BASE + 0x40044) -#define PLDI2CMOD_ACKCLK 0x00000200 -#define PLDI2CMOD_DTWD 0x00000100 -#define PLDI2CMOD_10BT 0x00000004 -#define PLDI2CMOD_ATM_NORMAL 0x00000000 -#define PLDI2CMOD_ATM_AUTO 0x00000003 -#define PLDI2CACK __reg32(M32700UT_LAN_BASE + 0x40048) -#define PLDI2CACK_ACK 0x00000001 -#define PLDI2CFREQ __reg32(M32700UT_LAN_BASE + 0x4004c) -#define PLDI2CCND __reg32(M32700UT_LAN_BASE + 0x40050) -#define PLDI2CCND_START 0x00000001 -#define PLDI2CCND_STOP 0x00000002 -#define PLDI2CSTEN __reg32(M32700UT_LAN_BASE + 0x40054) -#define PLDI2CSTEN_STEN 0x00000001 -#define PLDI2CDATA __reg32(M32700UT_LAN_BASE + 0x40060) -#define PLDI2CSTS __reg32(M32700UT_LAN_BASE + 0x40064) -#define PLDI2CSTS_TRX 0x00000020 -#define PLDI2CSTS_BB 0x00000010 -#define PLDI2CSTS_NOACK 0x00000001 /* 0:ack, 1:noack */ - -#endif /* _M32700UT_M32700UT_LAN_H */ diff --git a/include/asm-m32r/m32700ut/m32700ut_lcd.h b/include/asm-m32r/m32700ut/m32700ut_lcd.h deleted file mode 100644 index 4c24890..0000000 --- a/include/asm-m32r/m32700ut/m32700ut_lcd.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef _M32700UT_M32700UT_LCD_H -#define _M32700UT_M32700UT_LCD_H - -/* - * include/asm-m32r/m32700ut/m32700ut_lcd.h - * - * M32700UT-LCD board - * - * Copyright (c) 2002 Takeo Takahashi - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef __ASSEMBLY__ -/* - * C functions use non-cache address. - */ -#define M32700UT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */) -#else -#define M32700UT_LCD_BASE (0x10000000 + NONCACHE_OFFSET) -#endif /* __ASSEMBLY__ */ - -/* - * ICU - */ -#define M32700UT_LCD_IRQ_BAT_INT (M32700UT_LCD_PLD_IRQ_BASE + 1) -#define M32700UT_LCD_IRQ_USB_INT1 (M32700UT_LCD_PLD_IRQ_BASE + 2) -#define M32700UT_LCD_IRQ_AUDT0 (M32700UT_LCD_PLD_IRQ_BASE + 3) -#define M32700UT_LCD_IRQ_AUDT2 (M32700UT_LCD_PLD_IRQ_BASE + 4) -#define M32700UT_LCD_IRQ_BATSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 16) -#define M32700UT_LCD_IRQ_BATSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 17) -#define M32700UT_LCD_IRQ_ASNDSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 18) -#define M32700UT_LCD_IRQ_ASNDSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 19) -#define M32700UT_LCD_IRQ_ACNLSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 21) - -#define M32700UT_LCD_ICUISTS __reg16(M32700UT_LCD_BASE + 0x300002) -#define M32700UT_LCD_ICUISTS_VECB_MASK (0xf000) -#define M32700UT_LCD_VECB(x) ((x) & M32700UT_LCD_ICUISTS_VECB_MASK) -#define M32700UT_LCD_ICUISTS_ISN_MASK (0x07c0) -#define M32700UT_LCD_ICUISTS_ISN(x) ((x) & M32700UT_LCD_ICUISTS_ISN_MASK) -#define M32700UT_LCD_ICUIREQ0 __reg16(M32700UT_LCD_BASE + 0x300004) -#define M32700UT_LCD_ICUIREQ1 __reg16(M32700UT_LCD_BASE + 0x300006) -#define M32700UT_LCD_ICUCR1 __reg16(M32700UT_LCD_BASE + 0x300020) -#define M32700UT_LCD_ICUCR2 __reg16(M32700UT_LCD_BASE + 0x300022) -#define M32700UT_LCD_ICUCR3 __reg16(M32700UT_LCD_BASE + 0x300024) -#define M32700UT_LCD_ICUCR4 __reg16(M32700UT_LCD_BASE + 0x300026) -#define M32700UT_LCD_ICUCR16 __reg16(M32700UT_LCD_BASE + 0x300030) -#define M32700UT_LCD_ICUCR17 __reg16(M32700UT_LCD_BASE + 0x300032) -#define M32700UT_LCD_ICUCR18 __reg16(M32700UT_LCD_BASE + 0x300034) -#define M32700UT_LCD_ICUCR19 __reg16(M32700UT_LCD_BASE + 0x300036) -#define M32700UT_LCD_ICUCR21 __reg16(M32700UT_LCD_BASE + 0x30003a) - -#endif /* _M32700UT_M32700UT_LCD_H */ diff --git a/include/asm-m32r/m32700ut/m32700ut_pld.h b/include/asm-m32r/m32700ut/m32700ut_pld.h deleted file mode 100644 index 57623be..0000000 --- a/include/asm-m32r/m32700ut/m32700ut_pld.h +++ /dev/null @@ -1,259 +0,0 @@ -#ifndef _M32700UT_M32700UT_PLD_H -#define _M32700UT_M32700UT_PLD_H - -/* - * include/asm-m32r/m32700ut/m32700ut_pld.h - * - * Definitions for Programable Logic Device(PLD) on M32700UT board. - * - * Copyright (c) 2002 Takeo Takahashi - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_USRV) -#define PLD_PLAT_BASE 0x04c00000 -#else -#error "no platform configuration" -#endif - -#ifndef __ASSEMBLY__ -/* - * C functions use non-cache address. - */ -#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) -#define __reg8 (volatile unsigned char *) -#define __reg16 (volatile unsigned short *) -#define __reg32 (volatile unsigned int *) -#else -#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) -#define __reg8 -#define __reg16 -#define __reg32 -#endif /* __ASSEMBLY__ */ - -/* CFC */ -#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) -#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) -#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) -#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) -#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008) -#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) -#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) -#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010) - -/* MMC */ -#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) -#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) -#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) -#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) -#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) -#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) -#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) -#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) -#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) -#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) -#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) -#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) - -/* ICU - * ICUISTS: status register - * ICUIREQ0: request register - * ICUIREQ1: request register - * ICUCR3: control register for CFIREQ# interrupt - * ICUCR4: control register for CFC Card insert interrupt - * ICUCR5: control register for CFC Card eject interrupt - * ICUCR6: control register for external interrupt - * ICUCR11: control register for MMC Card insert/eject interrupt - * ICUCR13: control register for SC error interrupt - * ICUCR14: control register for SC receive interrupt - * ICUCR15: control register for SC send interrupt - * ICUCR16: control register for SIO0 receive interrupt - * ICUCR17: control register for SIO0 send interrupt - */ -#if !defined(CONFIG_PLAT_USRV) -#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */ -#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */ -#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */ -#define PLD_IRQ_CFIREQ (M32700UT_PLD_IRQ_BASE + 3) /* CF IREQ */ -#define PLD_IRQ_CFC_INSERT (M32700UT_PLD_IRQ_BASE + 4) /* CF Insert */ -#define PLD_IRQ_CFC_EJECT (M32700UT_PLD_IRQ_BASE + 5) /* CF Eject */ -#define PLD_IRQ_EXINT (M32700UT_PLD_IRQ_BASE + 6) /* EXINT */ -#define PLD_IRQ_INT7 (M32700UT_PLD_IRQ_BASE + 7) /* reserved */ -#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */ -#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */ -#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */ -#define PLD_IRQ_MMCCARD (M32700UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ -#define PLD_IRQ_INT12 (M32700UT_PLD_IRQ_BASE + 12) /* reserved */ -#define PLD_IRQ_SC_ERROR (M32700UT_PLD_IRQ_BASE + 13) /* SC error */ -#define PLD_IRQ_SC_RCV (M32700UT_PLD_IRQ_BASE + 14) /* SC receive */ -#define PLD_IRQ_SC_SND (M32700UT_PLD_IRQ_BASE + 15) /* SC send */ -#define PLD_IRQ_SIO0_RCV (M32700UT_PLD_IRQ_BASE + 16) /* SIO receive */ -#define PLD_IRQ_SIO0_SND (M32700UT_PLD_IRQ_BASE + 17) /* SIO send */ -#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */ -#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */ -#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */ -#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */ -#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */ -#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */ -#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */ -#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */ -#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */ -#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */ -#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */ -#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */ -#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */ -#define PLD_IRQ_INT31 (M32700UT_PLD_IRQ_BASE + 31) /* reserved */ - -#else /* CONFIG_PLAT_USRV */ - -#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */ -#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */ -#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */ -#define PLD_IRQ_CF0 (M32700UT_PLD_IRQ_BASE + 3) /* CF0# */ -#define PLD_IRQ_CF1 (M32700UT_PLD_IRQ_BASE + 4) /* CF1# */ -#define PLD_IRQ_CF2 (M32700UT_PLD_IRQ_BASE + 5) /* CF2# */ -#define PLD_IRQ_CF3 (M32700UT_PLD_IRQ_BASE + 6) /* CF3# */ -#define PLD_IRQ_CF4 (M32700UT_PLD_IRQ_BASE + 7) /* CF4# */ -#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */ -#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */ -#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */ -#define PLD_IRQ_INT11 (M32700UT_PLD_IRQ_BASE + 11) /* reserved */ -#define PLD_IRQ_UART0 (M32700UT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */ -#define PLD_IRQ_UART1 (M32700UT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */ -#define PLD_IRQ_INT14 (M32700UT_PLD_IRQ_BASE + 14) /* reserved */ -#define PLD_IRQ_INT15 (M32700UT_PLD_IRQ_BASE + 15) /* reserved */ -#define PLD_IRQ_SNDINT (M32700UT_PLD_IRQ_BASE + 16) /* SNDINT# */ -#define PLD_IRQ_INT17 (M32700UT_PLD_IRQ_BASE + 17) /* reserved */ -#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */ -#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */ -#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */ -#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */ -#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */ -#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */ -#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */ -#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */ -#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */ -#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */ -#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */ -#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */ -#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */ - -#endif /* CONFIG_PLAT_USRV */ - -#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) -#define PLD_ICUISTS_VECB_MASK (0xf000) -#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) -#define PLD_ICUISTS_ISN_MASK (0x07c0) -#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) -#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004) -#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006) -#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100) -#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102) -#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) -#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) -#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) -#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) -#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c) -#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e) -#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110) -#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112) -#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) -#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116) -#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) -#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) -#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) -#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e) -#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120) -#define PLD_ICUCR_IEN (0x1000) -#define PLD_ICUCR_IREQ (0x0100) -#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ -#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ -#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ -#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ -#define PLD_ICUCR_ILEVEL0 (0x0000) -#define PLD_ICUCR_ILEVEL1 (0x0001) -#define PLD_ICUCR_ILEVEL2 (0x0002) -#define PLD_ICUCR_ILEVEL3 (0x0003) -#define PLD_ICUCR_ILEVEL4 (0x0004) -#define PLD_ICUCR_ILEVEL5 (0x0005) -#define PLD_ICUCR_ILEVEL6 (0x0006) -#define PLD_ICUCR_ILEVEL7 (0x0007) - -/* Power Control of MMC and CF */ -#define PLD_CPCR __reg16(PLD_BASE + 0x14000) -#define PLD_CPCR_CF 0x0001 -#define PLD_CPCR_MMC 0x0002 - -/* LED Control - * - * 1: DIP swich side - * 2: Reset switch side - */ -#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) -#define PLD_IOLED_1_ON 0x001 -#define PLD_IOLED_1_OFF 0x000 -#define PLD_IOLED_2_ON 0x002 -#define PLD_IOLED_2_OFF 0x000 - -/* DIP Switch - * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) - * 1: - - * 2: - - * 3: - - */ -#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) -#define PLD_IOSWSTS_IOSW2 0x0200 -#define PLD_IOSWSTS_IOSW1 0x0100 -#define PLD_IOSWSTS_IOWP0 0x0001 - -/* CRC */ -#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) -#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) -#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) -#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) -#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) -#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) - -/* RTC */ -#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) -#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) -#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) -#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) -#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) - -/* SIO0 */ -#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) -#define PLD_ESIO0CR_TXEN 0x0001 -#define PLD_ESIO0CR_RXEN 0x0002 -#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) -#define PLD_ESIO0MOD0_CTSS 0x0040 -#define PLD_ESIO0MOD0_RTSS 0x0080 -#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) -#define PLD_ESIO0MOD1_LMFS 0x0010 -#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) -#define PLD_ESIO0STS_TEMP 0x0001 -#define PLD_ESIO0STS_TXCP 0x0002 -#define PLD_ESIO0STS_RXCP 0x0004 -#define PLD_ESIO0STS_TXSC 0x0100 -#define PLD_ESIO0STS_RXSC 0x0200 -#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) -#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) -#define PLD_ESIO0INTCR_TXIEN 0x0002 -#define PLD_ESIO0INTCR_RXCEN 0x0004 -#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) -#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) -#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) - -/* SIM Card */ -#define PLD_SCCR __reg16(PLD_BASE + 0x38000) -#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) -#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) -#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) -#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) -#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) -#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) - -#endif /* _M32700UT_M32700UT_PLD.H */ diff --git a/include/asm-m32r/m32r.h b/include/asm-m32r/m32r.h deleted file mode 100644 index 214b44b..0000000 --- a/include/asm-m32r/m32r.h +++ /dev/null @@ -1,160 +0,0 @@ -#ifndef _ASM_M32R_M32R_H_ -#define _ASM_M32R_M32R_H_ - -/* - * Renesas M32R processor - * - * Copyright (C) 2003, 2004 Renesas Technology Corp. - */ - - -/* Chip type */ -#if defined(CONFIG_CHIP_XNUX_MP) || defined(CONFIG_CHIP_XNUX2_MP) -#include -#elif defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \ - || defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \ - || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104) -#include -#endif - -/* Platform type */ -#if defined(CONFIG_PLAT_M32700UT) -#include -#include -#include -/* for ei_handler:linux/arch/m32r/kernel/entry.S */ -#define M32R_INT1ICU_ISTS PLD_ICUISTS -#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE -#define M32R_INT0ICU_ISTS M32700UT_LAN_ICUISTS -#define M32R_INT0ICU_IRQ_BASE M32700UT_LAN_PLD_IRQ_BASE -#define M32R_INT2ICU_ISTS M32700UT_LCD_ICUISTS -#define M32R_INT2ICU_IRQ_BASE M32700UT_LCD_PLD_IRQ_BASE -#endif /* CONFIG_PLAT_M32700UT */ - -#if defined(CONFIG_PLAT_OPSPUT) -#include -#include -#include -/* for ei_handler:linux/arch/m32r/kernel/entry.S */ -#define M32R_INT1ICU_ISTS PLD_ICUISTS -#define M32R_INT1ICU_IRQ_BASE OPSPUT_PLD_IRQ_BASE -#define M32R_INT0ICU_ISTS OPSPUT_LAN_ICUISTS -#define M32R_INT0ICU_IRQ_BASE OPSPUT_LAN_PLD_IRQ_BASE -#define M32R_INT2ICU_ISTS OPSPUT_LCD_ICUISTS -#define M32R_INT2ICU_IRQ_BASE OPSPUT_LCD_PLD_IRQ_BASE -#endif /* CONFIG_PLAT_OPSPUT */ - -#if defined(CONFIG_PLAT_MAPPI2) -#include -#endif /* CONFIG_PLAT_MAPPI2 */ - -#if defined(CONFIG_PLAT_MAPPI3) -#include -#endif /* CONFIG_PLAT_MAPPI3 */ - -#if defined(CONFIG_PLAT_USRV) -#include -/* for ei_handler:linux/arch/m32r/kernel/entry.S */ -#define M32R_INT1ICU_ISTS PLD_ICUISTS -#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE -#endif - -#if defined(CONFIG_PLAT_M32104UT) -#include -/* for ei_handler:linux/arch/m32r/kernel/entry.S */ -#define M32R_INT1ICU_ISTS PLD_ICUISTS -#define M32R_INT1ICU_IRQ_BASE M32104UT_PLD_IRQ_BASE -#endif /* CONFIG_PLAT_M32104 */ - -/* - * M32R Register - */ - -/* - * MMU Register - */ - -#define MMU_REG_BASE (0xffff0000) -#define ITLB_BASE (0xfe000000) -#define DTLB_BASE (0xfe000800) - -#define NR_TLB_ENTRIES CONFIG_TLB_ENTRIES - -#define MATM MMU_REG_BASE /* MMU Address Translation Mode - Register */ -#define MPSZ (0x04 + MMU_REG_BASE) /* MMU Page Size Designation Register */ -#define MASID (0x08 + MMU_REG_BASE) /* MMU Address Space ID Register */ -#define MESTS (0x0c + MMU_REG_BASE) /* MMU Exception Status Register */ -#define MDEVA (0x10 + MMU_REG_BASE) /* MMU Operand Exception Virtual - Address Register */ -#define MDEVP (0x14 + MMU_REG_BASE) /* MMU Operand Exception Virtual Page - Number Register */ -#define MPTB (0x18 + MMU_REG_BASE) /* MMU Page Table Base Register */ -#define MSVA (0x20 + MMU_REG_BASE) /* MMU Search Virtual Address - Register */ -#define MTOP (0x24 + MMU_REG_BASE) /* MMU TLB Operation Register */ -#define MIDXI (0x28 + MMU_REG_BASE) /* MMU Index Register for - Instruciton */ -#define MIDXD (0x2c + MMU_REG_BASE) /* MMU Index Register for Operand */ - -#define MATM_offset (MATM - MMU_REG_BASE) -#define MPSZ_offset (MPSZ - MMU_REG_BASE) -#define MASID_offset (MASID - MMU_REG_BASE) -#define MESTS_offset (MESTS - MMU_REG_BASE) -#define MDEVA_offset (MDEVA - MMU_REG_BASE) -#define MDEVP_offset (MDEVP - MMU_REG_BASE) -#define MPTB_offset (MPTB - MMU_REG_BASE) -#define MSVA_offset (MSVA - MMU_REG_BASE) -#define MTOP_offset (MTOP - MMU_REG_BASE) -#define MIDXI_offset (MIDXI - MMU_REG_BASE) -#define MIDXD_offset (MIDXD - MMU_REG_BASE) - -#define MESTS_IT (1 << 0) /* Instruction TLB miss */ -#define MESTS_IA (1 << 1) /* Instruction Access Exception */ -#define MESTS_DT (1 << 4) /* Operand TLB miss */ -#define MESTS_DA (1 << 5) /* Operand Access Exception */ -#define MESTS_DRW (1 << 6) /* Operand Write Exception Flag */ - -/* - * PSW (Processor Status Word) - */ - -/* PSW bit */ -#define M32R_PSW_BIT_SM (7) /* Stack Mode */ -#define M32R_PSW_BIT_IE (6) /* Interrupt Enable */ -#define M32R_PSW_BIT_PM (3) /* Processor Mode [0:Supervisor,1:User] */ -#define M32R_PSW_BIT_C (0) /* Condition */ -#define M32R_PSW_BIT_BSM (7+8) /* Backup Stack Mode */ -#define M32R_PSW_BIT_BIE (6+8) /* Backup Interrupt Enable */ -#define M32R_PSW_BIT_BPM (3+8) /* Backup Processor Mode */ -#define M32R_PSW_BIT_BC (0+8) /* Backup Condition */ - -/* PSW bit map */ -#define M32R_PSW_SM (1UL<< M32R_PSW_BIT_SM) /* Stack Mode */ -#define M32R_PSW_IE (1UL<< M32R_PSW_BIT_IE) /* Interrupt Enable */ -#define M32R_PSW_PM (1UL<< M32R_PSW_BIT_PM) /* Processor Mode */ -#define M32R_PSW_C (1UL<< M32R_PSW_BIT_C) /* Condition */ -#define M32R_PSW_BSM (1UL<< M32R_PSW_BIT_BSM) /* Backup Stack Mode */ -#define M32R_PSW_BIE (1UL<< M32R_PSW_BIT_BIE) /* Backup Interrupt Enable */ -#define M32R_PSW_BPM (1UL<< M32R_PSW_BIT_BPM) /* Backup Processor Mode */ -#define M32R_PSW_BC (1UL<< M32R_PSW_BIT_BC) /* Backup Condition */ - -/* - * Direct address to SFR - */ - -#include -#ifdef CONFIG_MMU -#define NONCACHE_OFFSET (__PAGE_OFFSET + 0x20000000) -#else -#define NONCACHE_OFFSET __PAGE_OFFSET -#endif /* CONFIG_MMU */ - -#define M32R_ICU_ISTS_ADDR M32R_ICU_ISTS_PORTL+NONCACHE_OFFSET -#define M32R_ICU_IPICR_ADDR M32R_ICU_IPICR0_PORTL+NONCACHE_OFFSET -#define M32R_ICU_IMASK_ADDR M32R_ICU_IMASK_PORTL+NONCACHE_OFFSET -#define M32R_FPGA_CPU_NAME_ADDR M32R_FPGA_CPU_NAME0_PORTL+NONCACHE_OFFSET -#define M32R_FPGA_MODEL_ID_ADDR M32R_FPGA_MODEL_ID0_PORTL+NONCACHE_OFFSET -#define M32R_FPGA_VERSION_ADDR M32R_FPGA_VERSION0_PORTL+NONCACHE_OFFSET - -#endif /* _ASM_M32R_M32R_H_ */ diff --git a/include/asm-m32r/m32r_mp_fpga.h b/include/asm-m32r/m32r_mp_fpga.h deleted file mode 100644 index 976d2b9..0000000 --- a/include/asm-m32r/m32r_mp_fpga.h +++ /dev/null @@ -1,313 +0,0 @@ -#ifndef _ASM_M32R_M32R_MP_FPGA_ -#define _ASM_M32R_M32R_MP_FPGA_ - -/* - * Renesas M32R-MP-FPGA - * - * Copyright (c) 2002 Hitoshi Yamamoto - * Copyright (c) 2003, 2004 Renesas Technology Corp. - */ - -/* - * ======================================================== - * M32R-MP-FPGA Memory Map - * ======================================================== - * 0x00000000 : Block#0 : 64[MB] - * 0x03E00000 : SFR - * 0x03E00000 : reserved - * 0x03EF0000 : FPGA - * 0x03EF1000 : reserved - * 0x03EF4000 : CKM - * 0x03EF4000 : BSELC - * 0x03EF5000 : reserved - * 0x03EFC000 : MFT - * 0x03EFD000 : SIO - * 0x03EFE000 : reserved - * 0x03EFF000 : ICU - * 0x03F00000 : Internal SRAM 64[KB] - * 0x03F10000 : reserved - * -------------------------------------------------------- - * 0x04000000 : Block#1 : 64[MB] - * 0x04000000 : Debug board SRAM 4[MB] - * 0x04400000 : reserved - * -------------------------------------------------------- - * 0x08000000 : Block#2 : 64[MB] - * -------------------------------------------------------- - * 0x0C000000 : Block#3 : 64[MB] - * -------------------------------------------------------- - * 0x10000000 : Block#4 : 64[MB] - * -------------------------------------------------------- - * 0x14000000 : Block#5 : 64[MB] - * -------------------------------------------------------- - * 0x18000000 : Block#6 : 64[MB] - * -------------------------------------------------------- - * 0x1C000000 : Block#7 : 64[MB] - * -------------------------------------------------------- - * 0xFE000000 : TLB - * 0xFE000000 : ITLB - * 0xFE000080 : reserved - * 0xFE000800 : DTLB - * 0xFE000880 : reserved - * -------------------------------------------------------- - * 0xFF000000 : System area - * 0xFFFF0000 : MMU - * 0xFFFF0030 : reserved - * 0xFFFF8000 : Debug function - * 0xFFFFA000 : reserved - * 0xFFFFC000 : CPU control - * 0xFFFFFFFF - * ======================================================== - */ - -/*======================================================================* - * Special Function Register - *======================================================================*/ -#define M32R_SFR_OFFSET (0x00E00000) /* 0x03E00000-0x03EFFFFF 1[MB] */ - -/* - * FPGA registers. - */ -#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET) - -#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP) -#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP) -#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP) -#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP) -#define M32R_FPGA_CPU_NAME3_PORTL (0x1C+M32R_FPGA_TOP) -#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP) -#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP) -#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP) -#define M32R_FPGA_MODEL_ID3_PORTL (0x2C+M32R_FPGA_TOP) -#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP) -#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP) - -/* - * Clock and Power Manager registers. - */ -#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET) - -#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET) -#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET) -#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET) - -/* - * Block SELect Controller registers. - */ -#define M32R_BSELC_OFFSET (0x000F5000+M32R_SFR_OFFSET) - -#define M32R_BSEL0_CR0_PORTL (0x000+M32R_BSELC_OFFSET) -#define M32R_BSEL0_CR1_PORTL (0x004+M32R_BSELC_OFFSET) -#define M32R_BSEL1_CR0_PORTL (0x100+M32R_BSELC_OFFSET) -#define M32R_BSEL1_CR1_PORTL (0x104+M32R_BSELC_OFFSET) -#define M32R_BSEL2_CR0_PORTL (0x200+M32R_BSELC_OFFSET) -#define M32R_BSEL2_CR1_PORTL (0x204+M32R_BSELC_OFFSET) -#define M32R_BSEL3_CR0_PORTL (0x300+M32R_BSELC_OFFSET) -#define M32R_BSEL3_CR1_PORTL (0x304+M32R_BSELC_OFFSET) -#define M32R_BSEL4_CR0_PORTL (0x400+M32R_BSELC_OFFSET) -#define M32R_BSEL4_CR1_PORTL (0x404+M32R_BSELC_OFFSET) -#define M32R_BSEL5_CR0_PORTL (0x500+M32R_BSELC_OFFSET) -#define M32R_BSEL5_CR1_PORTL (0x504+M32R_BSELC_OFFSET) -#define M32R_BSEL6_CR0_PORTL (0x600+M32R_BSELC_OFFSET) -#define M32R_BSEL6_CR1_PORTL (0x604+M32R_BSELC_OFFSET) -#define M32R_BSEL7_CR0_PORTL (0x700+M32R_BSELC_OFFSET) -#define M32R_BSEL7_CR1_PORTL (0x704+M32R_BSELC_OFFSET) - -/* - * Multi Function Timer registers. - */ -#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET) - -#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */ -#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */ - -#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET) -#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */ -#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */ -#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */ -#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */ -#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */ - -#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET) -#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */ -#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */ -#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */ -#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */ -#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */ - -#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET) -#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */ -#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */ -#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */ -#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */ -#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */ - -#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET) -#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */ -#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */ -#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */ -#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */ -#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */ - -#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET) -#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */ -#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */ -#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */ -#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */ -#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */ - -#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET) -#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */ -#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */ -#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */ -#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */ -#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */ - -#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */ -#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */ -#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */ -#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */ -#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */ -#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */ -#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */ -#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */ -#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */ -#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */ -#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */ -#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */ - -#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */ -#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */ -#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */ -#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */ -#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */ -#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */ -#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */ -#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */ -#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */ -#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */ -#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */ -#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */ -#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */ -#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */ -#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */ - -/* - * Serial I/O registers. - */ -#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET) - -#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET) -#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET) -#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET) -#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET) -#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET) -#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET) -#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET) -#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET) -#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET) - -/* - * Interrupt Control Unit registers. - */ -#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET) - -#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET) -#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET) -#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET) -#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET) -#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET) -#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */ -#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */ -#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */ -#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */ -#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */ -#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */ -#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */ -#define M32R_ICU_CR8_PORTL (0x218+M32R_ICU_OFFSET) /* INT7 */ -#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* SIO0 RX */ -#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* SIO0 TX */ -#define M32R_ICU_CR40_PORTL (0x29C+M32R_ICU_OFFSET) /* DMAC0 */ -#define M32R_ICU_CR41_PORTL (0x2A0+M32R_ICU_OFFSET) /* DMAC1 */ -#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* MFT0 */ -#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* MFT1 */ -#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* MFT2 */ -#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* MFT3 */ -#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* MFT4 */ -#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* MFT5 */ -#define M32R_ICU_IPICR0_PORTL (0x2DC+M32R_ICU_OFFSET) /* IPI0 */ -#define M32R_ICU_IPICR1_PORTL (0x2E0+M32R_ICU_OFFSET) /* IPI1 */ -#define M32R_ICU_IPICR2_PORTL (0x2E4+M32R_ICU_OFFSET) /* IPI2 */ -#define M32R_ICU_IPICR3_PORTL (0x2E8+M32R_ICU_OFFSET) /* IPI3 */ -#define M32R_ICU_IPICR4_PORTL (0x2EC+M32R_ICU_OFFSET) /* IPI4 */ -#define M32R_ICU_IPICR5_PORTL (0x2F0+M32R_ICU_OFFSET) /* IPI5 */ -#define M32R_ICU_IPICR6_PORTL (0x2F4+M32R_ICU_OFFSET) /* IPI6 */ -#define M32R_ICU_IPICR7_PORTL (0x2FC+M32R_ICU_OFFSET) /* IPI7 */ - -#define M32R_ICUISTS_VECB(val) ((val>>28) & 0xF) -#define M32R_ICUISTS_ISN(val) ((val>>22) & 0x3F) -#define M32R_ICUISTS_PIML(val) ((val>>16) & 0x7) - -#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */ -#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */ -#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */ -#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */ -#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */ -#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */ -#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */ -#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */ - -#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */ -#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */ -#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */ -#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */ -#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/ -#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */ -#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */ -#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */ -#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */ -#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */ -#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */ -#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */ -#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */ -#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */ -#define M32R_ICUCR_ILEVEL_MASK (7UL) - -#define M32R_IRQ_INT0 (1) /* INT0 */ -#define M32R_IRQ_INT1 (2) /* INT1 */ -#define M32R_IRQ_INT2 (3) /* INT2 */ -#define M32R_IRQ_INT3 (4) /* INT3 */ -#define M32R_IRQ_INT4 (5) /* INT4 */ -#define M32R_IRQ_INT5 (6) /* INT5 */ -#define M32R_IRQ_INT6 (7) /* INT6 */ -#define M32R_IRQ_INT7 (8) /* INT7 */ -#define M32R_IRQ_MFT0 (16) /* MFT0 */ -#define M32R_IRQ_MFT1 (17) /* MFT1 */ -#define M32R_IRQ_MFT2 (18) /* MFT2 */ -#define M32R_IRQ_MFT3 (19) /* MFT3 */ -#define M32R_IRQ_MFT4 (20) /* MFT4 */ -#define M32R_IRQ_MFT5 (21) /* MFT5 */ -#define M32R_IRQ_DMAC0 (32) /* DMAC0 */ -#define M32R_IRQ_DMAC1 (33) /* DMAC1 */ -#define M32R_IRQ_SIO0_R (48) /* SIO0 receive */ -#define M32R_IRQ_SIO0_S (49) /* SIO0 send */ -#define M32R_IRQ_SIO1_R (50) /* SIO1 send */ -#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */ -#define M32R_IRQ_IPI0 (56) /* IPI0 */ -#define M32R_IRQ_IPI1 (57) /* IPI1 */ -#define M32R_IRQ_IPI2 (58) /* IPI2 */ -#define M32R_IRQ_IPI3 (59) /* IPI3 */ -#define M32R_IRQ_IPI4 (60) /* IPI4 */ -#define M32R_IRQ_IPI5 (61) /* IPI5 */ -#define M32R_IRQ_IPI6 (62) /* IPI6 */ -#define M32R_IRQ_IPI7 (63) /* IPI7 */ - -/*======================================================================* - * CPU - *======================================================================*/ - -#define M32R_CPUID_PORTL (0xFFFFFFE0) -#define M32R_MCICAR_PORTL (0xFFFFFFF0) -#define M32R_MCDCAR_PORTL (0xFFFFFFF4) -#define M32R_MCCR_PORTL (0xFFFFFFFC) - -#endif /* _ASM_M32R_M32R_MP_FPGA_ */ diff --git a/include/asm-m32r/mappi2/mappi2_pld.h b/include/asm-m32r/mappi2/mappi2_pld.h deleted file mode 100644 index 2624c9d..0000000 --- a/include/asm-m32r/mappi2/mappi2_pld.h +++ /dev/null @@ -1,150 +0,0 @@ -#ifndef _MAPPI2_PLD_H -#define _MAPPI2_PLD_H - -/* - * include/asm-m32r/mappi2/mappi2_pld.h - * - * Definitions for Extended IO Logic on MAPPI2 board. - * based on m32700ut_pld.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef __ASSEMBLY__ -/* FIXME: - * Some C functions use non-cache address, so can't define non-cache address. - */ -#define PLD_BASE (0x10c00000 /* + NONCACHE_OFFSET */) -#define __reg8 (volatile unsigned char *) -#define __reg16 (volatile unsigned short *) -#define __reg32 (volatile unsigned int *) -#else -#define PLD_BASE (0x10c00000 + NONCACHE_OFFSET) -#define __reg8 -#define __reg16 -#define __reg32 -#endif /* __ASSEMBLY__ */ - -/* CFC */ -#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) -#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) -#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) -#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) -#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) -#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) - -/* MMC */ -#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) -#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) -#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) -#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) -#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) -#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) -#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) -#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) -#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) -#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) -#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) -#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) - -/* Power Control of MMC and CF */ -#define PLD_CPCR __reg16(PLD_BASE + 0x14000) - - -/*==== ICU ====*/ -#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ -#define M32R_IRQ_I2C (28) /* I2C-BUS */ -#if 1 -#define PLD_IRQ_CFIREQ (40) /* CFC Card Interrupt */ -#define PLD_IRQ_CFC_INSERT (41) /* CFC Card Insert */ -#define PLD_IRQ_CFC_EJECT (42) /* CFC Card Eject */ -#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ -#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ -#else -#define PLD_IRQ_CFIREQ (34) /* CFC Card Interrupt */ -#define PLD_IRQ_CFC_INSERT (35) /* CFC Card Insert */ -#define PLD_IRQ_CFC_EJECT (36) /* CFC Card Eject */ -#define PLD_IRQ_MMCCARD (37) /* MMC Card Insert */ -#define PLD_IRQ_MMCIRQ (38) /* MMC Transfer Done */ -#endif - - -#if 0 -/* LED Control - * - * 1: DIP swich side - * 2: Reset switch side - */ -#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) -#define PLD_IOLED_1_ON 0x001 -#define PLD_IOLED_1_OFF 0x000 -#define PLD_IOLED_2_ON 0x002 -#define PLD_IOLED_2_OFF 0x000 - -/* DIP Switch - * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) - * 1: - - * 2: - - * 3: - - */ -#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) -#define PLD_IOSWSTS_IOSW2 0x0200 -#define PLD_IOSWSTS_IOSW1 0x0100 -#define PLD_IOSWSTS_IOWP0 0x0001 - -#endif - -/* CRC */ -#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) -#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) -#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) -#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) -#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) -#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) - - -#if 0 -/* RTC */ -#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) -#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) -#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) -#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) -#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) - -/* SIO0 */ -#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) -#define PLD_ESIO0CR_TXEN 0x0001 -#define PLD_ESIO0CR_RXEN 0x0002 -#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) -#define PLD_ESIO0MOD0_CTSS 0x0040 -#define PLD_ESIO0MOD0_RTSS 0x0080 -#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) -#define PLD_ESIO0MOD1_LMFS 0x0010 -#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) -#define PLD_ESIO0STS_TEMP 0x0001 -#define PLD_ESIO0STS_TXCP 0x0002 -#define PLD_ESIO0STS_RXCP 0x0004 -#define PLD_ESIO0STS_TXSC 0x0100 -#define PLD_ESIO0STS_RXSC 0x0200 -#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) -#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) -#define PLD_ESIO0INTCR_TXIEN 0x0002 -#define PLD_ESIO0INTCR_RXCEN 0x0004 -#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) -#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) -#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) - -/* SIM Card */ -#define PLD_SCCR __reg16(PLD_BASE + 0x38000) -#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) -#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) -#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) -#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) -#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) -#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) - -#endif - -#endif /* _MAPPI2_PLD.H */ diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/include/asm-m32r/mappi3/mappi3_pld.h deleted file mode 100644 index 451c40e..0000000 --- a/include/asm-m32r/mappi3/mappi3_pld.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef _MAPPI3_PLD_H -#define _MAPPI3_PLD_H - -/* - * include/asm-m32r/mappi3/mappi3_pld.h - * - * Definitions for Extended IO Logic on MAPPI3 board. - * based on m32700ut_pld.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef __ASSEMBLY__ -/* FIXME: - * Some C functions use non-cache address, so can't define non-cache address. - */ -#define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */) -#define __reg8 (volatile unsigned char *) -#define __reg16 (volatile unsigned short *) -#define __reg32 (volatile unsigned int *) -#else -#define PLD_BASE (0x1c000000 + NONCACHE_OFFSET) -#define __reg8 -#define __reg16 -#define __reg32 -#endif /* __ASSEMBLY__ */ - -/* CFC */ -#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) -#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) -#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) -#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) -#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) -#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) - -/* MMC */ -#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) -#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) -#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) -#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) -#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) -#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) -#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) -#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) -#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) -#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) -#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) -#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) - -/* Power Control of MMC and CF */ -#define PLD_CPCR __reg16(PLD_BASE + 0x14000) - -/* ICU */ -#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ -#define M32R_IRQ_I2C (28) /* I2C-BUS */ -#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */ -#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert & Eject */ -#define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */ -#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ -#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ - -#if 0 -/* LED Control - * - * 1: DIP swich side - * 2: Reset switch side - */ -#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) -#define PLD_IOLED_1_ON 0x001 -#define PLD_IOLED_1_OFF 0x000 -#define PLD_IOLED_2_ON 0x002 -#define PLD_IOLED_2_OFF 0x000 - -/* DIP Switch - * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) - * 1: - - * 2: - - * 3: - - */ -#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) -#define PLD_IOSWSTS_IOSW2 0x0200 -#define PLD_IOSWSTS_IOSW1 0x0100 -#define PLD_IOSWSTS_IOWP0 0x0001 - -#endif - -/* CRC */ -#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) -#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) -#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) -#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) -#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) -#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) - -#if 0 -/* RTC */ -#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) -#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) -#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) -#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) -#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) - -/* SIO0 */ -#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) -#define PLD_ESIO0CR_TXEN 0x0001 -#define PLD_ESIO0CR_RXEN 0x0002 -#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) -#define PLD_ESIO0MOD0_CTSS 0x0040 -#define PLD_ESIO0MOD0_RTSS 0x0080 -#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) -#define PLD_ESIO0MOD1_LMFS 0x0010 -#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) -#define PLD_ESIO0STS_TEMP 0x0001 -#define PLD_ESIO0STS_TXCP 0x0002 -#define PLD_ESIO0STS_RXCP 0x0004 -#define PLD_ESIO0STS_TXSC 0x0100 -#define PLD_ESIO0STS_RXSC 0x0200 -#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) -#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) -#define PLD_ESIO0INTCR_TXIEN 0x0002 -#define PLD_ESIO0INTCR_RXCEN 0x0004 -#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) -#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) -#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) - -/* SIM Card */ -#define PLD_SCCR __reg16(PLD_BASE + 0x38000) -#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) -#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) -#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) -#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) -#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) -#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) - -#endif - -/* Reset Control */ -#define PLD_REBOOT __reg16(PLD_BASE + 0x38000) - -#endif /* _MAPPI3_PLD.H */ diff --git a/include/asm-m32r/mc146818rtc.h b/include/asm-m32r/mc146818rtc.h deleted file mode 100644 index aa1b7bf..0000000 --- a/include/asm-m32r/mc146818rtc.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _ASM_MC146818RTC_H -#define _ASM_MC146818RTC_H - -#include - -#ifndef RTC_PORT -#define RTC_PORT(x) ((x)) -#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ -#endif - -/* - * The yet supported machines all access the RTC index register via - * an ISA port access but the way to access the date register differs ... - */ -#define CMOS_READ(addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -inb_p(RTC_PORT(1)); \ -}) -#define CMOS_WRITE(val, addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -outb_p((val),RTC_PORT(1)); \ -}) - -#define RTC_IRQ 8 - -#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-m32r/mman.h b/include/asm-m32r/mman.h deleted file mode 100644 index 516a897..0000000 --- a/include/asm-m32r/mman.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __M32R_MMAN_H__ -#define __M32R_MMAN_H__ - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __M32R_MMAN_H__ */ diff --git a/include/asm-m32r/mmu.h b/include/asm-m32r/mmu.h deleted file mode 100644 index 150cb92..0000000 --- a/include/asm-m32r/mmu.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _ASM_M32R_MMU_H -#define _ASM_M32R_MMU_H - -#if !defined(CONFIG_MMU) - -typedef struct { - unsigned long end_brk; -} mm_context_t; - -#else /* CONFIG_MMU */ - -/* Default "unsigned long" context */ -#ifndef CONFIG_SMP -typedef unsigned long mm_context_t; -#else -typedef unsigned long mm_context_t[NR_CPUS]; -#endif - -#endif /* CONFIG_MMU */ - -#endif /* _ASM_M32R_MMU_H */ diff --git a/include/asm-m32r/mmu_context.h b/include/asm-m32r/mmu_context.h deleted file mode 100644 index 91909e5..0000000 --- a/include/asm-m32r/mmu_context.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef _ASM_M32R_MMU_CONTEXT_H -#define _ASM_M32R_MMU_CONTEXT_H -#ifdef __KERNEL__ - -#include - -#define MMU_CONTEXT_ASID_MASK (0x000000FF) -#define MMU_CONTEXT_VERSION_MASK (0xFFFFFF00) -#define MMU_CONTEXT_FIRST_VERSION (0x00000100) -#define NO_CONTEXT (0x00000000) - -#ifndef __ASSEMBLY__ - -#include -#include -#include -#include -#include - -/* - * Cache of MMU context last used. - */ -#ifndef CONFIG_SMP -extern unsigned long mmu_context_cache_dat; -#define mmu_context_cache mmu_context_cache_dat -#define mm_context(mm) mm->context -#else /* not CONFIG_SMP */ -extern unsigned long mmu_context_cache_dat[]; -#define mmu_context_cache mmu_context_cache_dat[smp_processor_id()] -#define mm_context(mm) mm->context[smp_processor_id()] -#endif /* not CONFIG_SMP */ - -#define set_tlb_tag(entry, tag) (*entry = (tag & PAGE_MASK)|get_asid()) -#define set_tlb_data(entry, data) (*entry = (data | _PAGE_PRESENT)) - -#ifdef CONFIG_MMU -#define enter_lazy_tlb(mm, tsk) do { } while (0) - -static inline void get_new_mmu_context(struct mm_struct *mm) -{ - unsigned long mc = ++mmu_context_cache; - - if (!(mc & MMU_CONTEXT_ASID_MASK)) { - /* We exhaust ASID of this version. - Flush all TLB and start new cycle. */ - local_flush_tlb_all(); - /* Fix version if needed. - Note that we avoid version #0 to distingush NO_CONTEXT. */ - if (!mc) - mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION; - } - mm_context(mm) = mc; -} - -/* - * Get MMU context if needed. - */ -static inline void get_mmu_context(struct mm_struct *mm) -{ - if (mm) { - unsigned long mc = mmu_context_cache; - - /* Check if we have old version of context. - If it's old, we need to get new context with new version. */ - if ((mm_context(mm) ^ mc) & MMU_CONTEXT_VERSION_MASK) - get_new_mmu_context(mm); - } -} - -/* - * Initialize the context related info for a new mm_struct - * instance. - */ -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ -#ifndef CONFIG_SMP - mm->context = NO_CONTEXT; -#else /* CONFIG_SMP */ - int num_cpus = num_online_cpus(); - int i; - - for (i = 0 ; i < num_cpus ; i++) - mm->context[i] = NO_CONTEXT; -#endif /* CONFIG_SMP */ - - return 0; -} - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -#define destroy_context(mm) do { } while (0) - -static inline void set_asid(unsigned long asid) -{ - *(volatile unsigned long *)MASID = (asid & MMU_CONTEXT_ASID_MASK); -} - -static inline unsigned long get_asid(void) -{ - unsigned long asid; - - asid = *(volatile long *)MASID; - asid &= MMU_CONTEXT_ASID_MASK; - - return asid; -} - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void activate_context(struct mm_struct *mm) -{ - get_mmu_context(mm); - set_asid(mm_context(mm) & MMU_CONTEXT_ASID_MASK); -} - -static inline void switch_mm(struct mm_struct *prev, - struct mm_struct *next, struct task_struct *tsk) -{ -#ifdef CONFIG_SMP - int cpu = smp_processor_id(); -#endif /* CONFIG_SMP */ - - if (prev != next) { -#ifdef CONFIG_SMP - cpu_set(cpu, next->cpu_vm_mask); -#endif /* CONFIG_SMP */ - /* Set MPTB = next->pgd */ - *(volatile unsigned long *)MPTB = (unsigned long)next->pgd; - activate_context(next); - } -#ifdef CONFIG_SMP - else - if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) - activate_context(next); -#endif /* CONFIG_SMP */ -} - -#define deactivate_mm(tsk, mm) do { } while (0) - -#define activate_mm(prev, next) \ - switch_mm((prev), (next), NULL) - -#else /* not CONFIG_MMU */ -#define get_mmu_context(mm) do { } while (0) -#define init_new_context(tsk,mm) (0) -#define destroy_context(mm) do { } while (0) -#define set_asid(asid) do { } while (0) -#define get_asid() (0) -#define activate_context(mm) do { } while (0) -#define switch_mm(prev,next,tsk) do { } while (0) -#define deactivate_mm(mm,tsk) do { } while (0) -#define activate_mm(prev,next) do { } while (0) -#define enter_lazy_tlb(mm,tsk) do { } while (0) -#endif /* not CONFIG_MMU */ - -#endif /* not __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_M32R_MMU_CONTEXT_H */ diff --git a/include/asm-m32r/mmzone.h b/include/asm-m32r/mmzone.h deleted file mode 100644 index 9f3b5ac..0000000 --- a/include/asm-m32r/mmzone.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002 - * - */ - -#ifndef _ASM_MMZONE_H_ -#define _ASM_MMZONE_H_ - -#include - -#ifdef CONFIG_DISCONTIGMEM - -extern struct pglist_data *node_data[]; -#define NODE_DATA(nid) (node_data[nid]) - -#define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) \ -({ \ - pg_data_t *__pgdat = NODE_DATA(nid); \ - __pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1; \ -}) - -#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) -/* - * pfn_valid should be made as fast as possible, and the current definition - * is valid for machines that are NUMA, but still contiguous, which is what - * is currently supported. A more generalised, but slower definition would - * be something like this - mbligh: - * ( pfn_to_pgdat(pfn) && ((pfn) < node_end_pfn(pfn_to_nid(pfn))) ) - */ -#if 1 /* M32R_FIXME */ -#define pfn_valid(pfn) (1) -#else -#define pfn_valid(pfn) ((pfn) < num_physpages) -#endif - -/* - * generic node memory support, the following assumptions apply: - */ - -static __inline__ int pfn_to_nid(unsigned long pfn) -{ - int node; - - for (node = 0 ; node < MAX_NUMNODES ; node++) - if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node)) - break; - - return node; -} - -static __inline__ struct pglist_data *pfn_to_pgdat(unsigned long pfn) -{ - return(NODE_DATA(pfn_to_nid(pfn))); -} - -#endif /* CONFIG_DISCONTIGMEM */ -#endif /* _ASM_MMZONE_H_ */ diff --git a/include/asm-m32r/module.h b/include/asm-m32r/module.h deleted file mode 100644 index eb73ee0..0000000 --- a/include/asm-m32r/module.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_M32R_MODULE_H -#define _ASM_M32R_MODULE_H - -struct mod_arch_specific { }; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -#endif /* _ASM_M32R_MODULE_H */ diff --git a/include/asm-m32r/msgbuf.h b/include/asm-m32r/msgbuf.h deleted file mode 100644 index 0d5a877..0000000 --- a/include/asm-m32r/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASM_M32R_MSGBUF_H -#define _ASM_M32R_MSGBUF_H - -/* - * The msqid64_ds structure for m32r architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_M32R_MSGBUF_H */ diff --git a/include/asm-m32r/mutex.h b/include/asm-m32r/mutex.h deleted file mode 100644 index 458c1f7..0000000 --- a/include/asm-m32r/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-m32r/opsput/opsput_lan.h b/include/asm-m32r/opsput/opsput_lan.h deleted file mode 100644 index a5f18dd..0000000 --- a/include/asm-m32r/opsput/opsput_lan.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef _OPSPUT_OPSPUT_LAN_H -#define _OPSPUT_OPSPUT_LAN_H - -/* - * include/asm-m32r/opsput/opsput_lan.h - * - * OPSPUT-LAN board - * - * Copyright (c) 2002-2004 Takeo Takahashi, Mamoru Sakugawa - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef __ASSEMBLY__ -/* - * C functions use non-cache address. - */ -#define OPSPUT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */) -#else -#define OPSPUT_LAN_BASE (0x10000000 + NONCACHE_OFFSET) -#endif /* __ASSEMBLY__ */ - -/* ICU - * ICUISTS: status register - * ICUIREQ0: request register - * ICUIREQ1: request register - * ICUCR3: control register for CFIREQ# interrupt - * ICUCR4: control register for CFC Card insert interrupt - * ICUCR5: control register for CFC Card eject interrupt - * ICUCR6: control register for external interrupt - * ICUCR11: control register for MMC Card insert/eject interrupt - * ICUCR13: control register for SC error interrupt - * ICUCR14: control register for SC receive interrupt - * ICUCR15: control register for SC send interrupt - * ICUCR16: control register for SIO0 receive interrupt - * ICUCR17: control register for SIO0 send interrupt - */ -#define OPSPUT_LAN_IRQ_LAN (OPSPUT_LAN_PLD_IRQ_BASE + 1) /* LAN */ -#define OPSPUT_LAN_IRQ_I2C (OPSPUT_LAN_PLD_IRQ_BASE + 3) /* I2C */ - -#define OPSPUT_LAN_ICUISTS __reg16(OPSPUT_LAN_BASE + 0xc0002) -#define OPSPUT_LAN_ICUISTS_VECB_MASK (0xf000) -#define OPSPUT_LAN_VECB(x) ((x) & OPSPUT_LAN_ICUISTS_VECB_MASK) -#define OPSPUT_LAN_ICUISTS_ISN_MASK (0x07c0) -#define OPSPUT_LAN_ICUISTS_ISN(x) ((x) & OPSPUT_LAN_ICUISTS_ISN_MASK) -#define OPSPUT_LAN_ICUIREQ0 __reg16(OPSPUT_LAN_BASE + 0xc0004) -#define OPSPUT_LAN_ICUCR1 __reg16(OPSPUT_LAN_BASE + 0xc0010) -#define OPSPUT_LAN_ICUCR3 __reg16(OPSPUT_LAN_BASE + 0xc0014) - -#endif /* _OPSPUT_OPSPUT_LAN_H */ diff --git a/include/asm-m32r/opsput/opsput_lcd.h b/include/asm-m32r/opsput/opsput_lcd.h deleted file mode 100644 index 369c9f0..0000000 --- a/include/asm-m32r/opsput/opsput_lcd.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef _OPSPUT_OPSPUT_LCD_H -#define _OPSPUT_OPSPUT_LCD_H - -/* - * include/asm-m32r/opsput/opsput_lcd.h - * - * OPSPUT-LCD board - * - * Copyright (c) 2002 Takeo Takahashi - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef __ASSEMBLY__ -/* - * C functions use non-cache address. - */ -#define OPSPUT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */) -#else -#define OPSPUT_LCD_BASE (0x10000000 + NONCACHE_OFFSET) -#endif /* __ASSEMBLY__ */ - -/* - * ICU - */ -#define OPSPUT_LCD_IRQ_BAT_INT (OPSPUT_LCD_PLD_IRQ_BASE + 1) -#define OPSPUT_LCD_IRQ_USB_INT1 (OPSPUT_LCD_PLD_IRQ_BASE + 2) -#define OPSPUT_LCD_IRQ_AUDT0 (OPSPUT_LCD_PLD_IRQ_BASE + 3) -#define OPSPUT_LCD_IRQ_AUDT2 (OPSPUT_LCD_PLD_IRQ_BASE + 4) -#define OPSPUT_LCD_IRQ_BATSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 16) -#define OPSPUT_LCD_IRQ_BATSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 17) -#define OPSPUT_LCD_IRQ_ASNDSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 18) -#define OPSPUT_LCD_IRQ_ASNDSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 19) -#define OPSPUT_LCD_IRQ_ACNLSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 21) - -#define OPSPUT_LCD_ICUISTS __reg16(OPSPUT_LCD_BASE + 0x300002) -#define OPSPUT_LCD_ICUISTS_VECB_MASK (0xf000) -#define OPSPUT_LCD_VECB(x) ((x) & OPSPUT_LCD_ICUISTS_VECB_MASK) -#define OPSPUT_LCD_ICUISTS_ISN_MASK (0x07c0) -#define OPSPUT_LCD_ICUISTS_ISN(x) ((x) & OPSPUT_LCD_ICUISTS_ISN_MASK) -#define OPSPUT_LCD_ICUIREQ0 __reg16(OPSPUT_LCD_BASE + 0x300004) -#define OPSPUT_LCD_ICUIREQ1 __reg16(OPSPUT_LCD_BASE + 0x300006) -#define OPSPUT_LCD_ICUCR1 __reg16(OPSPUT_LCD_BASE + 0x300020) -#define OPSPUT_LCD_ICUCR2 __reg16(OPSPUT_LCD_BASE + 0x300022) -#define OPSPUT_LCD_ICUCR3 __reg16(OPSPUT_LCD_BASE + 0x300024) -#define OPSPUT_LCD_ICUCR4 __reg16(OPSPUT_LCD_BASE + 0x300026) -#define OPSPUT_LCD_ICUCR16 __reg16(OPSPUT_LCD_BASE + 0x300030) -#define OPSPUT_LCD_ICUCR17 __reg16(OPSPUT_LCD_BASE + 0x300032) -#define OPSPUT_LCD_ICUCR18 __reg16(OPSPUT_LCD_BASE + 0x300034) -#define OPSPUT_LCD_ICUCR19 __reg16(OPSPUT_LCD_BASE + 0x300036) -#define OPSPUT_LCD_ICUCR21 __reg16(OPSPUT_LCD_BASE + 0x30003a) - -#endif /* _OPSPUT_OPSPUT_LCD_H */ diff --git a/include/asm-m32r/opsput/opsput_pld.h b/include/asm-m32r/opsput/opsput_pld.h deleted file mode 100644 index 3f11ea1..0000000 --- a/include/asm-m32r/opsput/opsput_pld.h +++ /dev/null @@ -1,255 +0,0 @@ -#ifndef _OPSPUT_OPSPUT_PLD_H -#define _OPSPUT_OPSPUT_PLD_H - -/* - * include/asm-m32r/opsput/opsput_pld.h - * - * Definitions for Programable Logic Device(PLD) on OPSPUT board. - * - * Copyright (c) 2002 Takeo Takahashi - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#define PLD_PLAT_BASE 0x1cc00000 - -#ifndef __ASSEMBLY__ -/* - * C functions use non-cache address. - */ -#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) -#define __reg8 (volatile unsigned char *) -#define __reg16 (volatile unsigned short *) -#define __reg32 (volatile unsigned int *) -#else -#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) -#define __reg8 -#define __reg16 -#define __reg32 -#endif /* __ASSEMBLY__ */ - -/* CFC */ -#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) -#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) -#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) -#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) -#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008) -#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) -#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) -#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010) - -/* MMC */ -#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) -#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) -#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) -#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) -#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) -#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) -#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) -#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) -#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) -#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) -#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) -#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) - -/* ICU - * ICUISTS: status register - * ICUIREQ0: request register - * ICUIREQ1: request register - * ICUCR3: control register for CFIREQ# interrupt - * ICUCR4: control register for CFC Card insert interrupt - * ICUCR5: control register for CFC Card eject interrupt - * ICUCR6: control register for external interrupt - * ICUCR11: control register for MMC Card insert/eject interrupt - * ICUCR13: control register for SC error interrupt - * ICUCR14: control register for SC receive interrupt - * ICUCR15: control register for SC send interrupt - * ICUCR16: control register for SIO0 receive interrupt - * ICUCR17: control register for SIO0 send interrupt - */ -#if !defined(CONFIG_PLAT_USRV) -#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */ -#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */ -#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */ -#define PLD_IRQ_CFIREQ (OPSPUT_PLD_IRQ_BASE + 3) /* CF IREQ */ -#define PLD_IRQ_CFC_INSERT (OPSPUT_PLD_IRQ_BASE + 4) /* CF Insert */ -#define PLD_IRQ_CFC_EJECT (OPSPUT_PLD_IRQ_BASE + 5) /* CF Eject */ -#define PLD_IRQ_EXINT (OPSPUT_PLD_IRQ_BASE + 6) /* EXINT */ -#define PLD_IRQ_INT7 (OPSPUT_PLD_IRQ_BASE + 7) /* reserved */ -#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */ -#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */ -#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */ -#define PLD_IRQ_MMCCARD (OPSPUT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ -#define PLD_IRQ_INT12 (OPSPUT_PLD_IRQ_BASE + 12) /* reserved */ -#define PLD_IRQ_SC_ERROR (OPSPUT_PLD_IRQ_BASE + 13) /* SC error */ -#define PLD_IRQ_SC_RCV (OPSPUT_PLD_IRQ_BASE + 14) /* SC receive */ -#define PLD_IRQ_SC_SND (OPSPUT_PLD_IRQ_BASE + 15) /* SC send */ -#define PLD_IRQ_SIO0_RCV (OPSPUT_PLD_IRQ_BASE + 16) /* SIO receive */ -#define PLD_IRQ_SIO0_SND (OPSPUT_PLD_IRQ_BASE + 17) /* SIO send */ -#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */ -#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */ -#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */ -#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */ -#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */ -#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */ -#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */ -#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */ -#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */ -#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */ -#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */ -#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */ -#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */ -#define PLD_IRQ_INT31 (OPSPUT_PLD_IRQ_BASE + 31) /* reserved */ - -#else /* CONFIG_PLAT_USRV */ - -#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */ -#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */ -#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */ -#define PLD_IRQ_CF0 (OPSPUT_PLD_IRQ_BASE + 3) /* CF0# */ -#define PLD_IRQ_CF1 (OPSPUT_PLD_IRQ_BASE + 4) /* CF1# */ -#define PLD_IRQ_CF2 (OPSPUT_PLD_IRQ_BASE + 5) /* CF2# */ -#define PLD_IRQ_CF3 (OPSPUT_PLD_IRQ_BASE + 6) /* CF3# */ -#define PLD_IRQ_CF4 (OPSPUT_PLD_IRQ_BASE + 7) /* CF4# */ -#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */ -#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */ -#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */ -#define PLD_IRQ_INT11 (OPSPUT_PLD_IRQ_BASE + 11) /* reserved */ -#define PLD_IRQ_UART0 (OPSPUT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */ -#define PLD_IRQ_UART1 (OPSPUT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */ -#define PLD_IRQ_INT14 (OPSPUT_PLD_IRQ_BASE + 14) /* reserved */ -#define PLD_IRQ_INT15 (OPSPUT_PLD_IRQ_BASE + 15) /* reserved */ -#define PLD_IRQ_SNDINT (OPSPUT_PLD_IRQ_BASE + 16) /* SNDINT# */ -#define PLD_IRQ_INT17 (OPSPUT_PLD_IRQ_BASE + 17) /* reserved */ -#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */ -#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */ -#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */ -#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */ -#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */ -#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */ -#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */ -#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */ -#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */ -#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */ -#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */ -#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */ -#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */ - -#endif /* CONFIG_PLAT_USRV */ - -#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) -#define PLD_ICUISTS_VECB_MASK (0xf000) -#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) -#define PLD_ICUISTS_ISN_MASK (0x07c0) -#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) -#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004) -#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006) -#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100) -#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102) -#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) -#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) -#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) -#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) -#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c) -#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e) -#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110) -#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112) -#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) -#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116) -#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) -#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) -#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) -#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e) -#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120) -#define PLD_ICUCR_IEN (0x1000) -#define PLD_ICUCR_IREQ (0x0100) -#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ -#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ -#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ -#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ -#define PLD_ICUCR_ILEVEL0 (0x0000) -#define PLD_ICUCR_ILEVEL1 (0x0001) -#define PLD_ICUCR_ILEVEL2 (0x0002) -#define PLD_ICUCR_ILEVEL3 (0x0003) -#define PLD_ICUCR_ILEVEL4 (0x0004) -#define PLD_ICUCR_ILEVEL5 (0x0005) -#define PLD_ICUCR_ILEVEL6 (0x0006) -#define PLD_ICUCR_ILEVEL7 (0x0007) - -/* Power Control of MMC and CF */ -#define PLD_CPCR __reg16(PLD_BASE + 0x14000) -#define PLD_CPCR_CF 0x0001 -#define PLD_CPCR_MMC 0x0002 - -/* LED Control - * - * 1: DIP swich side - * 2: Reset switch side - */ -#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) -#define PLD_IOLED_1_ON 0x001 -#define PLD_IOLED_1_OFF 0x000 -#define PLD_IOLED_2_ON 0x002 -#define PLD_IOLED_2_OFF 0x000 - -/* DIP Switch - * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) - * 1: - - * 2: - - * 3: - - */ -#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) -#define PLD_IOSWSTS_IOSW2 0x0200 -#define PLD_IOSWSTS_IOSW1 0x0100 -#define PLD_IOSWSTS_IOWP0 0x0001 - -/* CRC */ -#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) -#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) -#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) -#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) -#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) -#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) - -/* RTC */ -#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) -#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) -#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) -#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) -#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) - -/* SIO0 */ -#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) -#define PLD_ESIO0CR_TXEN 0x0001 -#define PLD_ESIO0CR_RXEN 0x0002 -#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) -#define PLD_ESIO0MOD0_CTSS 0x0040 -#define PLD_ESIO0MOD0_RTSS 0x0080 -#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) -#define PLD_ESIO0MOD1_LMFS 0x0010 -#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) -#define PLD_ESIO0STS_TEMP 0x0001 -#define PLD_ESIO0STS_TXCP 0x0002 -#define PLD_ESIO0STS_RXCP 0x0004 -#define PLD_ESIO0STS_TXSC 0x0100 -#define PLD_ESIO0STS_RXSC 0x0200 -#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) -#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) -#define PLD_ESIO0INTCR_TXIEN 0x0002 -#define PLD_ESIO0INTCR_RXCEN 0x0004 -#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) -#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) -#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) - -/* SIM Card */ -#define PLD_SCCR __reg16(PLD_BASE + 0x38000) -#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) -#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) -#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) -#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) -#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) -#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) - -#endif /* _OPSPUT_OPSPUT_PLD.H */ diff --git a/include/asm-m32r/page.h b/include/asm-m32r/page.h deleted file mode 100644 index c933308..0000000 --- a/include/asm-m32r/page.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef _ASM_M32R_PAGE_H -#define _ASM_M32R_PAGE_H - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#ifndef __ASSEMBLY__ - -extern void clear_page(void *to); -extern void copy_page(void *to, void *from); - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ - alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) -#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -#define pte_val(x) ((x).pte) -#define PTE_MASK PAGE_MASK - -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#endif /* !__ASSEMBLY__ */ - -/* - * This handles the memory map.. We could make this a config - * option, but too many people screw it up, and too few need - * it. - * - * A __PAGE_OFFSET of 0xC0000000 means that the kernel has - * a virtual address space of one gigabyte, which limits the - * amount of physical memory you can use to about 950MB. - * - * If you want more physical memory than this then see the CONFIG_HIGHMEM4G - * and CONFIG_HIGHMEM64G options in the kernel configuration. - */ - -#define __MEMORY_START CONFIG_MEMORY_START -#define __MEMORY_SIZE CONFIG_MEMORY_SIZE - -#ifdef CONFIG_MMU -#define __PAGE_OFFSET (0x80000000) -#else -#define __PAGE_OFFSET (0x00000000) -#endif - -#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET) -#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET) -#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET)) - -#ifndef CONFIG_DISCONTIGMEM -#define PFN_BASE (CONFIG_MEMORY_START >> PAGE_SHIFT) -#define ARCH_PFN_OFFSET PFN_BASE -#define pfn_valid(pfn) (((pfn) - PFN_BASE) < max_mapnr) -#endif /* !CONFIG_DISCONTIGMEM */ - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC ) - -#define devmem_is_allowed(x) 1 - -#include -#include - -#endif /* _ASM_M32R_PAGE_H */ diff --git a/include/asm-m32r/param.h b/include/asm-m32r/param.h deleted file mode 100644 index 94c7701..0000000 --- a/include/asm-m32r/param.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_M32R_PARAM_H -#define _ASM_M32R_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _ASM_M32R_PARAM_H */ - diff --git a/include/asm-m32r/pci.h b/include/asm-m32r/pci.h deleted file mode 100644 index fe785d1..0000000 --- a/include/asm-m32r/pci.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_M32R_PCI_H -#define _ASM_M32R_PCI_H - -#include - -#define PCI_DMA_BUS_IS_PHYS (1) - -#endif /* _ASM_M32R_PCI_H */ diff --git a/include/asm-m32r/percpu.h b/include/asm-m32r/percpu.h deleted file mode 100644 index e316930..0000000 --- a/include/asm-m32r/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_M32R_PERCPU__ -#define __ARCH_M32R_PERCPU__ - -#include - -#endif /* __ARCH_M32R_PERCPU__ */ diff --git a/include/asm-m32r/pgalloc.h b/include/asm-m32r/pgalloc.h deleted file mode 100644 index f11a2b9..0000000 --- a/include/asm-m32r/pgalloc.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef _ASM_M32R_PGALLOC_H -#define _ASM_M32R_PGALLOC_H - -#include - -#include - -#define pmd_populate_kernel(mm, pmd, pte) \ - set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte))) - -static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd, - pgtable_t pte) -{ - set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte))); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * Allocate and free page tables. - */ -static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm) -{ - pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); - - return pgd; -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - free_page((unsigned long)pgd); -} - -static __inline__ pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO); - - return pte; -} - -static __inline__ pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - struct page *pte = alloc_page(GFP_KERNEL|__GFP_ZERO); - - pgtable_page_ctor(pte); - return pte; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long)pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - __free_page(pte); -} - -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - * (In the PAE case we free the pmds as part of the pgd.) - */ - -#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) -#define pgd_populate(mm, pmd, pte) BUG() - -#define check_pgt_cache() do { } while (0) - -#endif /* _ASM_M32R_PGALLOC_H */ diff --git a/include/asm-m32r/pgtable-2level.h b/include/asm-m32r/pgtable-2level.h deleted file mode 100644 index bca3475..0000000 --- a/include/asm-m32r/pgtable-2level.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef _ASM_M32R_PGTABLE_2LEVEL_H -#define _ASM_M32R_PGTABLE_2LEVEL_H -#ifdef __KERNEL__ - -/* - * traditional M32R two-level paging structure: - */ - -#define PGDIR_SHIFT 22 -#define PTRS_PER_PGD 1024 - -/* - * the M32R is two-level, so we don't really have any - * PMD directory physically. - */ -#define PMD_SHIFT 22 -#define PTRS_PER_PMD 1 - -#define PTRS_PER_PTE 1024 - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -#define pgd_clear(xp) do { } while (0) - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) (*(pteptr) = pteval) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * (pmds are folded into pgds so this doesnt get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) -#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval) - -#define pgd_page_vaddr(pgd) \ -((unsigned long) __va(pgd_val(pgd) & PAGE_MASK)) - -#ifndef CONFIG_DISCONTIGMEM -#define pgd_page(pgd) (mem_map + ((pgd_val(pgd) >> PAGE_SHIFT) - PFN_BASE)) -#endif /* !CONFIG_DISCONTIGMEM */ - -static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address) -{ - return (pmd_t *) dir; -} - -#define ptep_get_and_clear(mm,addr,xp) __pte(xchg(&(xp)->pte, 0)) -#define pte_same(a, b) (pte_val(a) == pte_val(b)) -#define pte_page(x) pfn_to_page(pte_pfn(x)) -#define pte_none(x) (!pte_val(x)) -#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (((pte_val(pte) >> 2) & 0x7f) | (((pte_val(pte) >> 10)) << 7)) -#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7f) << 2) | (((off) >> 7) << 10) | _PAGE_FILE }) - -#endif /* __KERNEL__ */ -#endif /* _ASM_M32R_PGTABLE_2LEVEL_H */ diff --git a/include/asm-m32r/pgtable.h b/include/asm-m32r/pgtable.h deleted file mode 100644 index e6359c5..0000000 --- a/include/asm-m32r/pgtable.h +++ /dev/null @@ -1,363 +0,0 @@ -#ifndef _ASM_M32R_PGTABLE_H -#define _ASM_M32R_PGTABLE_H - -#include - -#ifdef __KERNEL__ -/* - * The Linux memory management assumes a three-level page table setup. On - * the M32R, we use that, but "fold" the mid level into the top-level page - * table, so that we physically have the same two-level page table as the - * M32R mmu expects. - * - * This file contains the functions and defines necessary to modify and use - * the M32R page table tree. - */ - -/* CAUTION!: If you change macro definitions in this file, you might have to - * change arch/m32r/mmu.S manually. - */ - -#ifndef __ASSEMBLY__ - -#include -#include -#include -#include -#include - -struct mm_struct; -struct vm_area_struct; - -extern pgd_t swapper_pg_dir[1024]; -extern void paging_init(void); - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned long empty_zero_page[1024]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -#endif /* !__ASSEMBLY__ */ - -#ifndef __ASSEMBLY__ -#include -#endif - -#define pgtable_cache_init() do { } while (0) - -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE - 1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE - 1)) - -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#ifndef __ASSEMBLY__ -/* Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -#define VMALLOC_START KSEG2 -#define VMALLOC_END KSEG3 - -/* - * M32R TLB format - * - * [0] [1:19] [20:23] [24:31] - * +-----------------------+----+-------------+ - * | VPN |0000| ASID | - * +-----------------------+----+-------------+ - * +-+---------------------+----+-+---+-+-+-+-+ - * |0 PPN |0000|N|AC |L|G|V| | - * +-+---------------------+----+-+---+-+-+-+-+ - * RWX - */ - -#define _PAGE_BIT_DIRTY 0 /* software: page changed */ -#define _PAGE_BIT_FILE 0 /* when !present: nonlinear file - mapping */ -#define _PAGE_BIT_PRESENT 1 /* Valid: page is valid */ -#define _PAGE_BIT_GLOBAL 2 /* Global */ -#define _PAGE_BIT_LARGE 3 /* Large */ -#define _PAGE_BIT_EXEC 4 /* Execute */ -#define _PAGE_BIT_WRITE 5 /* Write */ -#define _PAGE_BIT_READ 6 /* Read */ -#define _PAGE_BIT_NONCACHABLE 7 /* Non cachable */ -#define _PAGE_BIT_ACCESSED 8 /* software: page referenced */ -#define _PAGE_BIT_PROTNONE 9 /* software: if not present */ - -#define _PAGE_DIRTY (1UL << _PAGE_BIT_DIRTY) -#define _PAGE_FILE (1UL << _PAGE_BIT_FILE) -#define _PAGE_PRESENT (1UL << _PAGE_BIT_PRESENT) -#define _PAGE_GLOBAL (1UL << _PAGE_BIT_GLOBAL) -#define _PAGE_LARGE (1UL << _PAGE_BIT_LARGE) -#define _PAGE_EXEC (1UL << _PAGE_BIT_EXEC) -#define _PAGE_WRITE (1UL << _PAGE_BIT_WRITE) -#define _PAGE_READ (1UL << _PAGE_BIT_READ) -#define _PAGE_NONCACHABLE (1UL << _PAGE_BIT_NONCACHABLE) -#define _PAGE_ACCESSED (1UL << _PAGE_BIT_ACCESSED) -#define _PAGE_PROTNONE (1UL << _PAGE_BIT_PROTNONE) - -#define _PAGE_TABLE \ - ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \ - | _PAGE_DIRTY ) -#define _KERNPG_TABLE \ - ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \ - | _PAGE_DIRTY ) -#define _PAGE_CHG_MASK \ - ( PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY ) - -#ifdef CONFIG_MMU -#define PAGE_NONE \ - __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) -#define PAGE_SHARED \ - __pgprot(_PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED) -#define PAGE_SHARED_EXEC \ - __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ \ - | _PAGE_ACCESSED) -#define PAGE_COPY \ - __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED) -#define PAGE_COPY_EXEC \ - __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED) -#define PAGE_READONLY \ - __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED) -#define PAGE_READONLY_EXEC \ - __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED) - -#define __PAGE_KERNEL \ - ( _PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ | _PAGE_DIRTY \ - | _PAGE_ACCESSED ) -#define __PAGE_KERNEL_RO ( __PAGE_KERNEL & ~_PAGE_WRITE ) -#define __PAGE_KERNEL_NOCACHE ( __PAGE_KERNEL | _PAGE_NONCACHABLE) - -#define MAKE_GLOBAL(x) __pgprot((x) | _PAGE_GLOBAL) - -#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL) -#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO) -#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE) - -#else -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_SHARED_EXEC __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_COPY_EXEC __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_READONLY_EXEC __pgprot(0) - -#define PAGE_KERNEL __pgprot(0) -#define PAGE_KERNEL_RO __pgprot(0) -#define PAGE_KERNEL_NOCACHE __pgprot(0) -#endif /* CONFIG_MMU */ - - /* xwr */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY_EXEC -#define __P101 PAGE_READONLY_EXEC -#define __P110 PAGE_COPY_EXEC -#define __P111 PAGE_COPY_EXEC - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY_EXEC -#define __S101 PAGE_READONLY_EXEC -#define __S110 PAGE_SHARED_EXEC -#define __S111 PAGE_SHARED_EXEC - -/* page table for 0-4MB for everybody */ - -#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE)) -#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) -#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) -#define pmd_bad(x) ((pmd_val(x) & ~PAGE_MASK) != _KERNPG_TABLE) - -#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_dirty(pte_t pte) -{ - return pte_val(pte) & _PAGE_DIRTY; -} - -static inline int pte_young(pte_t pte) -{ - return pte_val(pte) & _PAGE_ACCESSED; -} - -static inline int pte_write(pte_t pte) -{ - return pte_val(pte) & _PAGE_WRITE; -} - -/* - * The following only works if pte_present() is not true. - */ -static inline int pte_file(pte_t pte) -{ - return pte_val(pte) & _PAGE_FILE; -} - -static inline int pte_special(pte_t pte) -{ - return 0; -} - -static inline pte_t pte_mkclean(pte_t pte) -{ - pte_val(pte) &= ~_PAGE_DIRTY; - return pte; -} - -static inline pte_t pte_mkold(pte_t pte) -{ - pte_val(pte) &= ~_PAGE_ACCESSED; - return pte; -} - -static inline pte_t pte_wrprotect(pte_t pte) -{ - pte_val(pte) &= ~_PAGE_WRITE; - return pte; -} - -static inline pte_t pte_mkdirty(pte_t pte) -{ - pte_val(pte) |= _PAGE_DIRTY; - return pte; -} - -static inline pte_t pte_mkyoung(pte_t pte) -{ - pte_val(pte) |= _PAGE_ACCESSED; - return pte; -} - -static inline pte_t pte_mkwrite(pte_t pte) -{ - pte_val(pte) |= _PAGE_WRITE; - return pte; -} - -static inline pte_t pte_mkspecial(pte_t pte) -{ - return pte; -} - -static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) -{ - return test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep); -} - -static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - clear_bit(_PAGE_BIT_WRITE, ptep); -} - -/* - * Macro and implementation to make a page protection as uncachable. - */ -static inline pgprot_t pgprot_noncached(pgprot_t _prot) -{ - unsigned long prot = pgprot_val(_prot); - - prot |= _PAGE_NONCACHABLE; - return __pgprot(prot); -} - -#define pgprot_writecombine(prot) pgprot_noncached(prot) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), pgprot) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) \ - | pgprot_val(newprot))); - - return pte; -} - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ - -static inline void pmd_set(pmd_t * pmdp, pte_t * ptep) -{ - pmd_val(*pmdp) = (((unsigned long) ptep) & PAGE_MASK); -} - -#define pmd_page_vaddr(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) - -#ifndef CONFIG_DISCONTIGMEM -#define pmd_page(pmd) (mem_map + ((pmd_val(pmd) >> PAGE_SHIFT) - PFN_BASE)) -#endif /* !CONFIG_DISCONTIGMEM */ - -/* to find an entry in a page-table-directory. */ -#define pgd_index(address) \ - (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) - -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -#define pmd_index(address) \ - (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) - -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *)pmd_page_vaddr(*(dir)) + pte_index(address)) -#define pte_offset_map(dir, address) \ - ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address)) -#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -/* Encode and de-code a swap entry */ -#define __swp_type(x) (((x).val >> 2) & 0x1f) -#define __swp_offset(x) ((x).val >> 10) -#define __swp_entry(type, offset) \ - ((swp_entry_t) { ((type) << 2) | ((offset) << 10) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#endif /* !__ASSEMBLY__ */ - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define __HAVE_ARCH_PTE_SAME -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_M32R_PGTABLE_H */ diff --git a/include/asm-m32r/poll.h b/include/asm-m32r/poll.h deleted file mode 100644 index c98509d..0000000 --- a/include/asm-m32r/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m32r/posix_types.h b/include/asm-m32r/posix_types.h deleted file mode 100644 index b309c58..0000000 --- a/include/asm-m32r/posix_types.h +++ /dev/null @@ -1,118 +0,0 @@ -#ifndef _ASM_M32R_POSIX_TYPES_H -#define _ASM_M32R_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) */ - -#endif /* _ASM_M32R_POSIX_TYPES_H */ diff --git a/include/asm-m32r/processor.h b/include/asm-m32r/processor.h deleted file mode 100644 index 1a997fc..0000000 --- a/include/asm-m32r/processor.h +++ /dev/null @@ -1,147 +0,0 @@ -#ifndef _ASM_M32R_PROCESSOR_H -#define _ASM_M32R_PROCESSOR_H - -/* - * include/asm-m32r/processor.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 Linus Torvalds - * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto - * Copyright (C) 2004 Hirokazu Takata - */ - -#include -#include -#include /* pt_regs */ - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l; }) - -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * Members of this structure are referenced in head.S, so think twice - * before touching them. [mj] - */ - -struct cpuinfo_m32r { - unsigned long pgtable_cache_sz; - unsigned long cpu_clock; - unsigned long bus_clock; - unsigned long timer_divide; - unsigned long loops_per_jiffy; -}; - -/* - * capabilities of CPUs - */ - -extern struct cpuinfo_m32r boot_cpu_data; - -#ifdef CONFIG_SMP -extern struct cpuinfo_m32r cpu_data[]; -#define current_cpu_data cpu_data[smp_processor_id()] -#else -#define cpu_data (&boot_cpu_data) -#define current_cpu_data boot_cpu_data -#endif - -/* - * User space process size: 2GB (default). - */ -#ifdef CONFIG_MMU -#define TASK_SIZE (0x80000000UL) -#else -#define TASK_SIZE (0x00400000UL) -#endif - -#ifdef __KERNEL__ -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP -#endif - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3) - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAX_TRAPS 10 - -struct debug_trap { - int nr_trap; - unsigned long addr[MAX_TRAPS]; - unsigned long insn[MAX_TRAPS]; -}; - -struct thread_struct { - unsigned long address; - unsigned long trap_no; /* Trap number */ - unsigned long error_code; /* Error code of trap */ - unsigned long lr; /* saved pc */ - unsigned long sp; /* user stack pointer */ - struct debug_trap debug_trap; -}; - -#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) - -#define INIT_THREAD { \ - .sp = INIT_SP, \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ - -/* User process Backup PSW */ -#define USERPS_BPSW (M32R_PSW_BSM|M32R_PSW_BIE|M32R_PSW_BPM) - -#define start_thread(regs, new_pc, new_spu) \ - do { \ - set_fs(USER_DS); \ - regs->psw = (regs->psw | USERPS_BPSW) & 0x0000FFFFUL; \ - regs->bpc = new_pc; \ - regs->spu = new_spu; \ - } while (0) - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -#define prepare_to_copy(tsk) do { } while (0) - -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* Copy and release all segment info associated with a VM */ -extern void copy_segments(struct task_struct *p, struct mm_struct * mm); -extern void release_segments(struct mm_struct * mm); - -extern unsigned long thread_saved_pc(struct task_struct *); - -/* Copy and release all segment info associated with a VM */ -#define copy_segments(p, mm) do { } while (0) -#define release_segments(mm) do { } while (0) - -unsigned long get_wchan(struct task_struct *p); -#define KSTK_EIP(tsk) ((tsk)->thread.lr) -#define KSTK_ESP(tsk) ((tsk)->thread.sp) - -#define THREAD_SIZE (2*PAGE_SIZE) - -#define cpu_relax() barrier() - -#endif /* _ASM_M32R_PROCESSOR_H */ diff --git a/include/asm-m32r/ptrace.h b/include/asm-m32r/ptrace.h deleted file mode 100644 index a0755b9..0000000 --- a/include/asm-m32r/ptrace.h +++ /dev/null @@ -1,148 +0,0 @@ -#ifndef _ASM_M32R_PTRACE_H -#define _ASM_M32R_PTRACE_H - -/* - * linux/include/asm-m32r/ptrace.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * M32R version: - * Copyright (C) 2001-2002, 2004 Hirokazu Takata - */ - -/* 0 - 13 are integer registers (general purpose registers). */ -#define PT_R4 0 -#define PT_R5 1 -#define PT_R6 2 -#define PT_REGS 3 -#define PT_R0 4 -#define PT_R1 5 -#define PT_R2 6 -#define PT_R3 7 -#define PT_R7 8 -#define PT_R8 9 -#define PT_R9 10 -#define PT_R10 11 -#define PT_R11 12 -#define PT_R12 13 -#define PT_SYSCNR 14 -#define PT_R13 PT_FP -#define PT_R14 PT_LR -#define PT_R15 PT_SP - -/* processor status and miscellaneous context registers. */ -#define PT_ACC0H 15 -#define PT_ACC0L 16 -#define PT_ACC1H 17 /* ISA_DSP_LEVEL2 only */ -#define PT_ACC1L 18 /* ISA_DSP_LEVEL2 only */ -#define PT_PSW 19 -#define PT_BPC 20 -#define PT_BBPSW 21 -#define PT_BBPC 22 -#define PT_SPU 23 -#define PT_FP 24 -#define PT_LR 25 -#define PT_SPI 26 -#define PT_ORIGR0 27 - -/* virtual pt_reg entry for gdb */ -#define PT_PC 30 -#define PT_CBR 31 -#define PT_EVB 32 - - -/* Control registers. */ -#define SPR_CR0 PT_PSW -#define SPR_CR1 PT_CBR /* read only */ -#define SPR_CR2 PT_SPI -#define SPR_CR3 PT_SPU -#define SPR_CR4 -#define SPR_CR5 PT_EVB /* part of M32R/E, M32R/I core only */ -#define SPR_CR6 PT_BPC -#define SPR_CR7 -#define SPR_CR8 PT_BBPSW -#define SPR_CR9 -#define SPR_CR10 -#define SPR_CR11 -#define SPR_CR12 -#define SPR_CR13 PT_WR -#define SPR_CR14 PT_BBPC -#define SPR_CR15 - -/* this struct defines the way the registers are stored on the - stack during a system call. */ -struct pt_regs { - /* Saved main processor registers. */ - unsigned long r4; - unsigned long r5; - unsigned long r6; - struct pt_regs *pt_regs; - unsigned long r0; - unsigned long r1; - unsigned long r2; - unsigned long r3; - unsigned long r7; - unsigned long r8; - unsigned long r9; - unsigned long r10; - unsigned long r11; - unsigned long r12; - long syscall_nr; - - /* Saved main processor status and miscellaneous context registers. */ - unsigned long acc0h; - unsigned long acc0l; - unsigned long acc1h; /* ISA_DSP_LEVEL2 only */ - unsigned long acc1l; /* ISA_DSP_LEVEL2 only */ - unsigned long psw; - unsigned long bpc; /* saved PC for TRAP syscalls */ - unsigned long bbpsw; - unsigned long bbpc; - unsigned long spu; /* saved user stack */ - unsigned long fp; - unsigned long lr; /* saved PC for JL syscalls */ - unsigned long spi; /* saved kernel stack */ - unsigned long orig_r0; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 - -#define PTRACE_OLDSETOPTIONS 21 - -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 - -#ifdef __KERNEL__ - -#include /* M32R_PSW_BSM, M32R_PSW_BPM */ - -struct task_struct; -extern void init_debug_traps(struct task_struct *); -#define arch_ptrace_attach(child) \ - init_debug_traps(child) - -#if defined(CONFIG_ISA_M32R2) || defined(CONFIG_CHIP_VDEC2) -#define user_mode(regs) ((M32R_PSW_BPM & (regs)->psw) != 0) -#elif defined(CONFIG_ISA_M32R) -#define user_mode(regs) ((M32R_PSW_BSM & (regs)->psw) != 0) -#else -#error unknown isa configuration -#endif - -#define instruction_pointer(regs) ((regs)->bpc) -#define profile_pc(regs) instruction_pointer(regs) - -extern void show_regs(struct pt_regs *); - -extern void withdraw_debug_trap(struct pt_regs *regs); - -#define task_pt_regs(task) \ - ((struct pt_regs *)(task_stack_page(task) + THREAD_SIZE) - 1) - -#endif /* __KERNEL */ - -#endif /* _ASM_M32R_PTRACE_H */ diff --git a/include/asm-m32r/resource.h b/include/asm-m32r/resource.h deleted file mode 100644 index b1ce766..0000000 --- a/include/asm-m32r/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M32R_RESOURCE_H -#define _ASM_M32R_RESOURCE_H - -#include - -#endif /* _ASM_M32R_RESOURCE_H */ diff --git a/include/asm-m32r/rtc.h b/include/asm-m32r/rtc.h deleted file mode 100644 index 0340633..0000000 --- a/include/asm-m32r/rtc.h +++ /dev/null @@ -1,65 +0,0 @@ -#ifndef __RTC_H__ -#define __RTC_H__ - - /* Dallas DS1302 clock/calendar register numbers. */ -# define RTC_SECONDS 0 -# define RTC_MINUTES 1 -# define RTC_HOURS 2 -# define RTC_DAY_OF_MONTH 3 -# define RTC_MONTH 4 -# define RTC_WEEKDAY 5 -# define RTC_YEAR 6 -# define RTC_CONTROL 7 - - /* Bits in CONTROL register. */ -# define RTC_CONTROL_WRITEPROTECT 0x80 -# define RTC_TRICKLECHARGER 8 - - /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */ -# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */ -# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */ -# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */ -# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */ -# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */ -# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */ -# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */ - -#ifdef CONFIG_DS1302 -extern unsigned char ds1302_readreg(int reg); -extern void ds1302_writereg(int reg, unsigned char val); -extern int ds1302_init(void); -# define CMOS_READ(x) ds1302_readreg(x) -# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val) -# define RTC_INIT() ds1302_init() -#else - /* No RTC configured so we shouldn't try to access any. */ -# define CMOS_READ(x) 42 -# define CMOS_WRITE(x,y) -# define RTC_INIT() (-1) -#endif - -/* - * The struct used to pass data via the following ioctl. Similar to the - * struct tm in , but it needs to be here so that the kernel - * source is self contained, allowing cross-compiles, etc. etc. - */ -struct rtc_time { - int tm_sec; - int tm_min; - int tm_hour; - int tm_mday; - int tm_mon; - int tm_year; - int tm_wday; - int tm_yday; - int tm_isdst; -}; - -/* ioctl() calls that are permitted to the /dev/rtc interface. */ -#define RTC_MAGIC 'p' -#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) /* Read RTC time. */ -#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) /* Set RTC time. */ -#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int) -#define RTC_MAX_IOCTL 0x0b - -#endif /* __RTC_H__ */ diff --git a/include/asm-m32r/s1d13806.h b/include/asm-m32r/s1d13806.h deleted file mode 100644 index 248d36a..0000000 --- a/include/asm-m32r/s1d13806.h +++ /dev/null @@ -1,199 +0,0 @@ -//---------------------------------------------------------------------------- -// -// File generated by S1D13806CFG.EXE -// -// Copyright (c) 2000,2001 Epson Research and Development, Inc. -// All rights reserved. -// -//---------------------------------------------------------------------------- - -// Panel: (active) 640x480 77Hz STN Single 8-bit (PCLK=CLKI=25.175MHz) -// Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=33.333MHz) - -#define SWIVEL_VIEW 0 /* 0:none, 1:90 not completed */ - -static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = { - - {0x0001,0x00}, // Miscellaneous Register - {0x01FC,0x00}, // Display Mode Register -#if defined(CONFIG_PLAT_MAPPI) - {0x0004,0x00}, // General IO Pins Configuration Register 0 - {0x0005,0x00}, // General IO Pins Configuration Register 1 - {0x0008,0x00}, // General IO Pins Control Register 0 - {0x0009,0x00}, // General IO Pins Control Register 1 - {0x0010,0x00}, // Memory Clock Configuration Register - {0x0014,0x00}, // LCD Pixel Clock Configuration Register - {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register - {0x001C,0x00}, // MediaPlug Clock Configuration Register -/* - * .. 10MHz: 0x00 - * .. 30MHz: 0x01 - * 30MHz ..: 0x02 - */ - {0x001E,0x02}, // CPU To Memory Wait State Select Register - {0x0021,0x02}, // DRAM Refresh Rate Register - {0x002A,0x11}, // DRAM Timings Control Register 0 - {0x002B,0x13}, // DRAM Timings Control Register 1 - {0x0020,0x80}, // Memory Configuration Register - {0x0030,0x25}, // Panel Type Register - {0x0031,0x00}, // MOD Rate Register - {0x0032,0x4F}, // LCD Horizontal Display Width Register - {0x0034,0x12}, // LCD Horizontal Non-Display Period Register - {0x0035,0x01}, // TFT FPLINE Start Position Register - {0x0036,0x0B}, // TFT FPLINE Pulse Width Register - {0x0038,0xDF}, // LCD Vertical Display Height Register 0 - {0x0039,0x01}, // LCD Vertical Display Height Register 1 - {0x003A,0x2C}, // LCD Vertical Non-Display Period Register - {0x003B,0x0A}, // TFT FPFRAME Start Position Register - {0x003C,0x01}, // TFT FPFRAME Pulse Width Register - - {0x0041,0x00}, // LCD Miscellaneous Register - {0x0042,0x00}, // LCD Display Start Address Register 0 - {0x0043,0x00}, // LCD Display Start Address Register 1 - {0x0044,0x00}, // LCD Display Start Address Register 2 - -#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) - {0x0004,0x07}, // GPIO[0:7] direction - {0x0005,0x00}, // GPIO[8:12] direction - {0x0008,0x00}, // GPIO[0:7] data - {0x0009,0x00}, // GPIO[8:12] data - {0x0008,0x04}, // LCD panel Vcc on - {0x0008,0x05}, // LCD panel reset - {0x0010,0x01}, // Memory Clock Configuration Register - {0x0014,0x30}, // LCD Pixel Clock Configuration Register (CLKI 22MHz/4) - {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register - {0x001C,0x00}, // MediaPlug Clock Configuration Register(10MHz) - {0x001E,0x00}, // CPU To Memory Wait State Select Register - {0x0020,0x80}, // Memory Configuration Register - {0x0021,0x03}, // DRAM Refresh Rate Register - {0x002A,0x00}, // DRAM Timings Control Register 0 - {0x002B,0x01}, // DRAM Timings Control Register 1 - {0x0030,0x25}, // Panel Type Register - {0x0031,0x00}, // MOD Rate Register - {0x0032,0x1d}, // LCD Horizontal Display Width Register - {0x0034,0x05}, // LCD Horizontal Non-Display Period Register - {0x0035,0x01}, // TFT FPLINE Start Position Register - {0x0036,0x01}, // TFT FPLINE Pulse Width Register - {0x0038,0x3F}, // LCD Vertical Display Height Register 0 - {0x0039,0x01}, // LCD Vertical Display Height Register 1 - {0x003A,0x0b}, // LCD Vertical Non-Display Period Register - {0x003B,0x07}, // TFT FPFRAME Start Position Register - {0x003C,0x02}, // TFT FPFRAME Pulse Width Register - - {0x0041,0x00}, // LCD Miscellaneous Register -#if (SWIVEL_VIEW == 0) - {0x0042,0x00}, // LCD Display Start Address Register 0 - {0x0043,0x00}, // LCD Display Start Address Register 1 - {0x0044,0x00}, // LCD Display Start Address Register 2 - -#elif (SWIVEL_VIEW == 1) - // 1024 - W(320) = 0x2C0 - {0x0042,0xC0}, // LCD Display Start Address Register 0 - {0x0043,0x02}, // LCD Display Start Address Register 1 - {0x0044,0x00}, // LCD Display Start Address Register 2 - // 1024 - {0x0046,0x00}, // LCD Memory Address Offset Register 0 - {0x0047,0x02}, // LCD Memory Address Offset Register 1 -#else -#error unsupported SWIVEL_VIEW mode -#endif -#else -#error no platform configuration -#endif /* CONFIG_PLAT_XXX */ - - {0x0048,0x00}, // LCD Pixel Panning Register - {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register - {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register - {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register - {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register - {0x0053,0x01}, // CRT/TV HRTC Start Position Register - {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register - {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0 - {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1 - {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register - {0x0059,0x09}, // CRT/TV VRTC Start Position Register - {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register - {0x005B,0x10}, // TV Output Control Register - - {0x0062,0x00}, // CRT/TV Display Start Address Register 0 - {0x0063,0x00}, // CRT/TV Display Start Address Register 1 - {0x0064,0x00}, // CRT/TV Display Start Address Register 2 - - {0x0068,0x00}, // CRT/TV Pixel Panning Register - {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register - {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register - {0x0070,0x00}, // LCD Ink/Cursor Control Register - {0x0071,0x01}, // LCD Ink/Cursor Start Address Register - {0x0072,0x00}, // LCD Cursor X Position Register 0 - {0x0073,0x00}, // LCD Cursor X Position Register 1 - {0x0074,0x00}, // LCD Cursor Y Position Register 0 - {0x0075,0x00}, // LCD Cursor Y Position Register 1 - {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register - {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register - {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register - {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register - {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register - {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register - {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register - {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register - {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register - {0x0082,0x00}, // CRT/TV Cursor X Position Register 0 - {0x0083,0x00}, // CRT/TV Cursor X Position Register 1 - {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0 - {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1 - {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register - {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register - {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register - {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register - {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register - {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register - {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register - {0x0100,0x00}, // BitBlt Control Register 0 - {0x0101,0x00}, // BitBlt Control Register 1 - {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register - {0x0103,0x00}, // BitBlt Operation Register - {0x0104,0x00}, // BitBlt Source Start Address Register 0 - {0x0105,0x00}, // BitBlt Source Start Address Register 1 - {0x0106,0x00}, // BitBlt Source Start Address Register 2 - {0x0108,0x00}, // BitBlt Destination Start Address Register 0 - {0x0109,0x00}, // BitBlt Destination Start Address Register 1 - {0x010A,0x00}, // BitBlt Destination Start Address Register 2 - {0x010C,0x00}, // BitBlt Memory Address Offset Register 0 - {0x010D,0x00}, // BitBlt Memory Address Offset Register 1 - {0x0110,0x00}, // BitBlt Width Register 0 - {0x0111,0x00}, // BitBlt Width Register 1 - {0x0112,0x00}, // BitBlt Height Register 0 - {0x0113,0x00}, // BitBlt Height Register 1 - {0x0114,0x00}, // BitBlt Background Color Register 0 - {0x0115,0x00}, // BitBlt Background Color Register 1 - {0x0118,0x00}, // BitBlt Foreground Color Register 0 - {0x0119,0x00}, // BitBlt Foreground Color Register 1 - {0x01E0,0x00}, // Look-Up Table Mode Register - {0x01E2,0x00}, // Look-Up Table Address Register - {0x01F0,0x10}, // Power Save Configuration Register - {0x01F1,0x00}, // Power Save Status Register - {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register -#if (SWIVEL_VIEW == 0) - {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT) -#elif (SWIVEL_VIEW == 1) - {0x01FC,0x41}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT) -#else -#error unsupported SWIVEL_VIEW mode -#endif /* SWIVEL_VIEW */ - -#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) - {0x0008,0x07}, // LCD panel Vdd & Vg on -#endif - - {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp) -#if defined(CONFIG_PLAT_MAPPI) - {0x0046,0x80}, // LCD Memory Address Offset Register 0 - {0x0047,0x02}, // LCD Memory Address Offset Register 1 -#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3) - {0x0046,0xf0}, // LCD Memory Address Offset Register 0 - {0x0047,0x00}, // LCD Memory Address Offset Register 1 -#endif - {0x0060,0x05}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp) - {0x0066,0x80}, // CRT/TV Memory Address Offset Register 0 // takeo - {0x0067,0x02}, // CRT/TV Memory Address Offset Register 1 -}; diff --git a/include/asm-m32r/scatterlist.h b/include/asm-m32r/scatterlist.h deleted file mode 100644 index 1ed372c..0000000 --- a/include/asm-m32r/scatterlist.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _ASM_M32R_SCATTERLIST_H -#define _ASM_M32R_SCATTERLIST_H - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - char * address; /* Location data is to be transferred to, NULL for - * highmem page */ - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - - dma_addr_t dma_address; - unsigned int length; -}; - -#define ISA_DMA_THRESHOLD (0x1fffffff) - -#endif /* _ASM_M32R_SCATTERLIST_H */ diff --git a/include/asm-m32r/sections.h b/include/asm-m32r/sections.h deleted file mode 100644 index 5e5d21c..0000000 --- a/include/asm-m32r/sections.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _M32R_SECTIONS_H -#define _M32R_SECTIONS_H - -/* nothing to see, move along */ -#include - -#endif /* _M32R_SECTIONS_H */ diff --git a/include/asm-m32r/segment.h b/include/asm-m32r/segment.h deleted file mode 100644 index 42b11ae..0000000 --- a/include/asm-m32r/segment.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_M32R_SEGMENT_H -#define _ASM_M32R_SEGMENT_H - -#define __KERNEL_CS 0x10 -#define __KERNEL_DS 0x18 - -#define __USER_CS 0x23 -#define __USER_DS 0x2B - -#endif /* _ASM_M32R_SEGMENT_H */ diff --git a/include/asm-m32r/sembuf.h b/include/asm-m32r/sembuf.h deleted file mode 100644 index c9873d6..0000000 --- a/include/asm-m32r/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_M32R_SEMBUF_H -#define _ASM_M32R_SEMBUF_H - -/* - * The semid64_ds structure for m32r architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_M32R_SEMBUF_H */ diff --git a/include/asm-m32r/serial.h b/include/asm-m32r/serial.h deleted file mode 100644 index 5ac244c..0000000 --- a/include/asm-m32r/serial.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _ASM_M32R_SERIAL_H -#define _ASM_M32R_SERIAL_H - -/* include/asm-m32r/serial.h */ - - -#define BASE_BAUD 115200 - -#endif /* _ASM_M32R_SERIAL_H */ diff --git a/include/asm-m32r/setup.h b/include/asm-m32r/setup.h deleted file mode 100644 index c637ab9..0000000 --- a/include/asm-m32r/setup.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ASM_M32R_SETUP_H -#define _ASM_M32R_SETUP_H - -/* - * This is set up by the setup-routine at boot-time - */ - -#define COMMAND_LINE_SIZE 512 - -#ifdef __KERNEL__ - -#define PARAM ((unsigned char *)empty_zero_page) - -#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) -#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) -#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) -#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) -#define INITRD_START (*(unsigned long *) (PARAM+0x010)) -#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) - -#define M32R_CPUCLK (*(unsigned long *) (PARAM+0x018)) -#define M32R_BUSCLK (*(unsigned long *) (PARAM+0x01c)) -#define M32R_TIMER_DIVIDE (*(unsigned long *) (PARAM+0x020)) - -#define COMMAND_LINE ((char *) (PARAM+0x100)) - -#define SCREEN_INFO (*(struct screen_info *) (PARAM+0x200)) - -#define RAMDISK_IMAGE_START_MASK (0x07FF) -#define RAMDISK_PROMPT_FLAG (0x8000) -#define RAMDISK_LOAD_FLAG (0x4000) - -extern unsigned long memory_start; -extern unsigned long memory_end; - -#endif /* __KERNEL__ */ - -#endif /* _ASM_M32R_SETUP_H */ diff --git a/include/asm-m32r/shmbuf.h b/include/asm-m32r/shmbuf.h deleted file mode 100644 index b0cdf0a..0000000 --- a/include/asm-m32r/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASM_M32R_SHMBUF_H -#define _ASM_M32R_SHMBUF_H - -/* - * The shmid64_ds structure for M32R architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_M32R_SHMBUF_H */ diff --git a/include/asm-m32r/shmparam.h b/include/asm-m32r/shmparam.h deleted file mode 100644 index 35986d8..0000000 --- a/include/asm-m32r/shmparam.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M32R_SHMPARAM_H -#define _ASM_M32R_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_M32R_SHMPARAM_H */ diff --git a/include/asm-m32r/sigcontext.h b/include/asm-m32r/sigcontext.h deleted file mode 100644 index da4a9c3..0000000 --- a/include/asm-m32r/sigcontext.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef _ASM_M32R_SIGCONTEXT_H -#define _ASM_M32R_SIGCONTEXT_H - -struct sigcontext { - /* CPU registers */ - /* Saved main processor registers. */ - unsigned long sc_r4; - unsigned long sc_r5; - unsigned long sc_r6; - struct pt_regs *sc_pt_regs; - unsigned long sc_r0; - unsigned long sc_r1; - unsigned long sc_r2; - unsigned long sc_r3; - unsigned long sc_r7; - unsigned long sc_r8; - unsigned long sc_r9; - unsigned long sc_r10; - unsigned long sc_r11; - unsigned long sc_r12; - - /* Saved main processor status and miscellaneous context registers. */ - unsigned long sc_acc0h; - unsigned long sc_acc0l; - unsigned long sc_acc1h; /* ISA_DSP_LEVEL2 only */ - unsigned long sc_acc1l; /* ISA_DSP_LEVEL2 only */ - unsigned long sc_psw; - unsigned long sc_bpc; /* saved PC for TRAP syscalls */ - unsigned long sc_bbpsw; - unsigned long sc_bbpc; - unsigned long sc_spu; /* saved user stack */ - unsigned long sc_fp; - unsigned long sc_lr; /* saved PC for JL syscalls */ - unsigned long sc_spi; /* saved kernel stack */ - - unsigned long oldmask; -}; - -#endif /* _ASM_M32R_SIGCONTEXT_H */ diff --git a/include/asm-m32r/siginfo.h b/include/asm-m32r/siginfo.h deleted file mode 100644 index 7d9cd9e..0000000 --- a/include/asm-m32r/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M32R_SIGINFO_H -#define _M32R_SIGINFO_H - -#include - -#endif /* _M32R_SIGINFO_H */ diff --git a/include/asm-m32r/signal.h b/include/asm-m32r/signal.h deleted file mode 100644 index 1a60706..0000000 --- a/include/asm-m32r/signal.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef _ASM_M32R_SIGNAL_H -#define _ASM_M32R_SIGNAL_H - -#include -#include -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001u -#define SA_NOCLDWAIT 0x00000002u -#define SA_SIGINFO 0x00000004u -#define SA_ONSTACK 0x08000000u -#define SA_RESTART 0x10000000u -#define SA_NODEFER 0x40000000u -#define SA_RESETHAND 0x80000000u - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include - -#undef __HAVE_ARCH_SIG_BITOPS - -struct pt_regs; -extern int do_signal(struct pt_regs *regs, sigset_t *oldset); - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_M32R_SIGNAL_H */ diff --git a/include/asm-m32r/smp.h b/include/asm-m32r/smp.h deleted file mode 100644 index b96a6d2..0000000 --- a/include/asm-m32r/smp.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef _ASM_M32R_SMP_H -#define _ASM_M32R_SMP_H - -#ifdef CONFIG_SMP -#ifndef __ASSEMBLY__ - -#include -#include -#include -#include - -#define PHYSID_ARRAY_SIZE 1 - -struct physid_mask -{ - unsigned long mask[PHYSID_ARRAY_SIZE]; -}; - -typedef struct physid_mask physid_mask_t; - -#define physid_set(physid, map) set_bit(physid, (map).mask) -#define physid_clear(physid, map) clear_bit(physid, (map).mask) -#define physid_isset(physid, map) test_bit(physid, (map).mask) -#define physid_test_and_set(physid, map) test_and_set_bit(physid, (map).mask) - -#define physids_and(dst, src1, src2) bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS) -#define physids_or(dst, src1, src2) bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS) -#define physids_clear(map) bitmap_zero((map).mask, MAX_APICS) -#define physids_complement(dst, src) bitmap_complement((dst).mask,(src).mask, MAX_APICS) -#define physids_empty(map) bitmap_empty((map).mask, MAX_APICS) -#define physids_equal(map1, map2) bitmap_equal((map1).mask, (map2).mask, MAX_APICS) -#define physids_weight(map) bitmap_weight((map).mask, MAX_APICS) -#define physids_shift_right(d, s, n) bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS) -#define physids_shift_left(d, s, n) bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS) -#define physids_coerce(map) ((map).mask[0]) - -#define physids_promote(physids) \ - ({ \ - physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ - __physid_mask.mask[0] = physids; \ - __physid_mask; \ - }) - -#define physid_mask_of_physid(physid) \ - ({ \ - physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ - physid_set(physid, __physid_mask); \ - __physid_mask; \ - }) - -#define PHYSID_MASK_ALL { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} } -#define PHYSID_MASK_NONE { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} } - -extern physid_mask_t phys_cpu_present_map; - -/* - * Some lowlevel functions might want to know about - * the real CPU ID <-> CPU # mapping. - */ -extern volatile int cpu_2_physid[NR_CPUS]; -#define cpu_to_physid(cpu_id) cpu_2_physid[cpu_id] - -#define raw_smp_processor_id() (current_thread_info()->cpu) - -extern cpumask_t cpu_callout_map; - -static __inline__ int hard_smp_processor_id(void) -{ - return (int)*(volatile long *)M32R_CPUID_PORTL; -} - -static __inline__ int cpu_logical_map(int cpu) -{ - return cpu; -} - -static __inline__ int cpu_number_map(int cpu) -{ - return cpu; -} - -static __inline__ unsigned int num_booting_cpus(void) -{ - return cpus_weight(cpu_callout_map); -} - -extern void smp_send_timer(void); -extern unsigned long send_IPI_mask_phys(cpumask_t, int, int); - -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -#endif /* not __ASSEMBLY__ */ - -#define NO_PROC_ID (0xff) /* No processor magic marker */ - -#define PROC_CHANGE_PENALTY (15) /* Schedule penalty */ - -/* - * M32R-mp IPI - */ -#define RESCHEDULE_IPI (M32R_IRQ_IPI0-M32R_IRQ_IPI0) -#define INVALIDATE_TLB_IPI (M32R_IRQ_IPI1-M32R_IRQ_IPI0) -#define CALL_FUNCTION_IPI (M32R_IRQ_IPI2-M32R_IRQ_IPI0) -#define LOCAL_TIMER_IPI (M32R_IRQ_IPI3-M32R_IRQ_IPI0) -#define INVALIDATE_CACHE_IPI (M32R_IRQ_IPI4-M32R_IRQ_IPI0) -#define CPU_BOOT_IPI (M32R_IRQ_IPI5-M32R_IRQ_IPI0) -#define CALL_FUNC_SINGLE_IPI (M32R_IRQ_IPI6-M32R_IRQ_IPI0) - -#define IPI_SHIFT (0) -#define NR_IPIS (8) - -#else /* CONFIG_SMP */ - -#define hard_smp_processor_id() 0 - -#endif /* CONFIG_SMP */ - -#endif /* _ASM_M32R_SMP_H */ diff --git a/include/asm-m32r/socket.h b/include/asm-m32r/socket.h deleted file mode 100644 index be7ed58..0000000 --- a/include/asm-m32r/socket.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _ASM_M32R_SOCKET_H -#define _ASM_M32R_SOCKET_H - -#include - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* _ASM_M32R_SOCKET_H */ diff --git a/include/asm-m32r/sockios.h b/include/asm-m32r/sockios.h deleted file mode 100644 index 6c1fb9b..0000000 --- a/include/asm-m32r/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_M32R_SOCKIOS_H -#define _ASM_M32R_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_M32R_SOCKIOS_H */ diff --git a/include/asm-m32r/spinlock.h b/include/asm-m32r/spinlock.h deleted file mode 100644 index dded923..0000000 --- a/include/asm-m32r/spinlock.h +++ /dev/null @@ -1,326 +0,0 @@ -#ifndef _ASM_M32R_SPINLOCK_H -#define _ASM_M32R_SPINLOCK_H - -/* - * linux/include/asm-m32r/spinlock.h - * - * M32R version: - * Copyright (C) 2001, 2002 Hitoshi Yamamoto - * Copyright (C) 2004 Hirokazu Takata - */ - -#include -#include -#include - -/* - * Your basic SMP spinlocks, allowing only a single CPU anywhere - * - * (the type definitions are in asm/spinlock_types.h) - * - * Simple spin lock operations. There are two variants, one clears IRQ's - * on the local processor, one does not. - * - * We make no fairness assumptions. They have a cost. - */ - -#define __raw_spin_is_locked(x) (*(volatile int *)(&(x)->slock) <= 0) -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) -#define __raw_spin_unlock_wait(x) \ - do { cpu_relax(); } while (__raw_spin_is_locked(x)) - -/** - * __raw_spin_trylock - Try spin lock and return a result - * @lock: Pointer to the lock variable - * - * __raw_spin_trylock() tries to get the lock and returns a result. - * On the m32r, the result value is 1 (= Success) or 0 (= Failure). - */ -static inline int __raw_spin_trylock(raw_spinlock_t *lock) -{ - int oldval; - unsigned long tmp1, tmp2; - - /* - * lock->slock : =1 : unlock - * : <=0 : lock - * { - * oldval = lock->slock; <--+ need atomic operation - * lock->slock = 0; <--+ - * } - */ - __asm__ __volatile__ ( - "# __raw_spin_trylock \n\t" - "ldi %1, #0; \n\t" - "mvfc %2, psw; \n\t" - "clrpsw #0x40 -> nop; \n\t" - DCACHE_CLEAR("%0", "r6", "%3") - "lock %0, @%3; \n\t" - "unlock %1, @%3; \n\t" - "mvtc %2, psw; \n\t" - : "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2) - : "r" (&lock->slock) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r6" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - - return (oldval > 0); -} - -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - unsigned long tmp0, tmp1; - - /* - * lock->slock : =1 : unlock - * : <=0 : lock - * - * for ( ; ; ) { - * lock->slock -= 1; <-- need atomic operation - * if (lock->slock == 0) break; - * for ( ; lock->slock <= 0 ; ); - * } - */ - __asm__ __volatile__ ( - "# __raw_spin_lock \n\t" - ".fillinsn \n" - "1: \n\t" - "mvfc %1, psw; \n\t" - "clrpsw #0x40 -> nop; \n\t" - DCACHE_CLEAR("%0", "r6", "%2") - "lock %0, @%2; \n\t" - "addi %0, #-1; \n\t" - "unlock %0, @%2; \n\t" - "mvtc %1, psw; \n\t" - "bltz %0, 2f; \n\t" - LOCK_SECTION_START(".balign 4 \n\t") - ".fillinsn \n" - "2: \n\t" - "ld %0, @%2; \n\t" - "bgtz %0, 1b; \n\t" - "bra 2b; \n\t" - LOCK_SECTION_END - : "=&r" (tmp0), "=&r" (tmp1) - : "r" (&lock->slock) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r6" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - mb(); - lock->slock = 1; -} - -/* - * Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * NOTE! it is quite common to have readers in interrupts - * but no interrupt writers. For those circumstances we - * can "mix" irq-safe locks - any writer needs to get a - * irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - * - * On x86, we implement read-write locks as a 32-bit counter - * with the high bit (sign) being the "contended" bit. - * - * The inline assembly is non-obvious. Think about it. - * - * Changed to use the same technique as rw semaphores. See - * semaphore.h for details. -ben - */ - -/** - * read_can_lock - would read_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_read_can_lock(x) ((int)(x)->lock > 0) - -/** - * write_can_lock - would write_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) - -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - unsigned long tmp0, tmp1; - - /* - * rw->lock : >0 : unlock - * : <=0 : lock - * - * for ( ; ; ) { - * rw->lock -= 1; <-- need atomic operation - * if (rw->lock >= 0) break; - * rw->lock += 1; <-- need atomic operation - * for ( ; rw->lock <= 0 ; ); - * } - */ - __asm__ __volatile__ ( - "# read_lock \n\t" - ".fillinsn \n" - "1: \n\t" - "mvfc %1, psw; \n\t" - "clrpsw #0x40 -> nop; \n\t" - DCACHE_CLEAR("%0", "r6", "%2") - "lock %0, @%2; \n\t" - "addi %0, #-1; \n\t" - "unlock %0, @%2; \n\t" - "mvtc %1, psw; \n\t" - "bltz %0, 2f; \n\t" - LOCK_SECTION_START(".balign 4 \n\t") - ".fillinsn \n" - "2: \n\t" - "clrpsw #0x40 -> nop; \n\t" - DCACHE_CLEAR("%0", "r6", "%2") - "lock %0, @%2; \n\t" - "addi %0, #1; \n\t" - "unlock %0, @%2; \n\t" - "mvtc %1, psw; \n\t" - ".fillinsn \n" - "3: \n\t" - "ld %0, @%2; \n\t" - "bgtz %0, 1b; \n\t" - "bra 3b; \n\t" - LOCK_SECTION_END - : "=&r" (tmp0), "=&r" (tmp1) - : "r" (&rw->lock) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r6" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); -} - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - unsigned long tmp0, tmp1, tmp2; - - /* - * rw->lock : =RW_LOCK_BIAS_STR : unlock - * : !=RW_LOCK_BIAS_STR : lock - * - * for ( ; ; ) { - * rw->lock -= RW_LOCK_BIAS_STR; <-- need atomic operation - * if (rw->lock == 0) break; - * rw->lock += RW_LOCK_BIAS_STR; <-- need atomic operation - * for ( ; rw->lock != RW_LOCK_BIAS_STR ; ) ; - * } - */ - __asm__ __volatile__ ( - "# write_lock \n\t" - "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t" - "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t" - ".fillinsn \n" - "1: \n\t" - "mvfc %2, psw; \n\t" - "clrpsw #0x40 -> nop; \n\t" - DCACHE_CLEAR("%0", "r7", "%3") - "lock %0, @%3; \n\t" - "sub %0, %1; \n\t" - "unlock %0, @%3; \n\t" - "mvtc %2, psw; \n\t" - "bnez %0, 2f; \n\t" - LOCK_SECTION_START(".balign 4 \n\t") - ".fillinsn \n" - "2: \n\t" - "clrpsw #0x40 -> nop; \n\t" - DCACHE_CLEAR("%0", "r7", "%3") - "lock %0, @%3; \n\t" - "add %0, %1; \n\t" - "unlock %0, @%3; \n\t" - "mvtc %2, psw; \n\t" - ".fillinsn \n" - "3: \n\t" - "ld %0, @%3; \n\t" - "beq %0, %1, 1b; \n\t" - "bra 3b; \n\t" - LOCK_SECTION_END - : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2) - : "r" (&rw->lock) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r7" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); -} - -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - unsigned long tmp0, tmp1; - - __asm__ __volatile__ ( - "# read_unlock \n\t" - "mvfc %1, psw; \n\t" - "clrpsw #0x40 -> nop; \n\t" - DCACHE_CLEAR("%0", "r6", "%2") - "lock %0, @%2; \n\t" - "addi %0, #1; \n\t" - "unlock %0, @%2; \n\t" - "mvtc %1, psw; \n\t" - : "=&r" (tmp0), "=&r" (tmp1) - : "r" (&rw->lock) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r6" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - unsigned long tmp0, tmp1, tmp2; - - __asm__ __volatile__ ( - "# write_unlock \n\t" - "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t" - "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t" - "mvfc %2, psw; \n\t" - "clrpsw #0x40 -> nop; \n\t" - DCACHE_CLEAR("%0", "r7", "%3") - "lock %0, @%3; \n\t" - "add %0, %1; \n\t" - "unlock %0, @%3; \n\t" - "mvtc %2, psw; \n\t" - : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2) - : "r" (&rw->lock) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r7" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); -} - -static inline int __raw_read_trylock(raw_rwlock_t *lock) -{ - atomic_t *count = (atomic_t*)lock; - if (atomic_dec_return(count) >= 0) - return 1; - atomic_inc(count); - return 0; -} - -static inline int __raw_write_trylock(raw_rwlock_t *lock) -{ - atomic_t *count = (atomic_t *)lock; - if (atomic_sub_and_test(RW_LOCK_BIAS, count)) - return 1; - atomic_add(RW_LOCK_BIAS, count); - return 0; -} - -#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock) -#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock) - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* _ASM_M32R_SPINLOCK_H */ diff --git a/include/asm-m32r/spinlock_types.h b/include/asm-m32r/spinlock_types.h deleted file mode 100644 index 83f5210..0000000 --- a/include/asm-m32r/spinlock_types.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_M32R_SPINLOCK_TYPES_H -#define _ASM_M32R_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile int slock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 1 } - -typedef struct { - volatile int lock; -} raw_rwlock_t; - -#define RW_LOCK_BIAS 0x01000000 -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } - -#endif /* _ASM_M32R_SPINLOCK_TYPES_H */ diff --git a/include/asm-m32r/stat.h b/include/asm-m32r/stat.h deleted file mode 100644 index da4518f..0000000 --- a/include/asm-m32r/stat.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef _ASM_M32R_STAT_H -#define _ASM_M32R_STAT_H - -#include - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; -#define STAT64_HAS_BROKEN_ST_INO - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - -#if defined(__BIG_ENDIAN) - unsigned long __pad4; /* future possible st_blocks high bits */ - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ -#elif defined(__LITTLE_ENDIAN) - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ -#else -#error no endian defined -#endif - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#endif /* _ASM_M32R_STAT_H */ diff --git a/include/asm-m32r/statfs.h b/include/asm-m32r/statfs.h deleted file mode 100644 index 6eb4c60..0000000 --- a/include/asm-m32r/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M32R_STATFS_H -#define _ASM_M32R_STATFS_H - -#include - -#endif /* _ASM_M32R_STATFS_H */ diff --git a/include/asm-m32r/string.h b/include/asm-m32r/string.h deleted file mode 100644 index e61e2b0..0000000 --- a/include/asm-m32r/string.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_M32R_STRING_H -#define _ASM_M32R_STRING_H - -#define __HAVE_ARCH_STRLEN -extern size_t strlen(const char * s); - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *__to, __const__ void *__from, size_t __n); - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *__s, int __c, size_t __count); - -#endif /* _ASM_M32R_STRING_H */ diff --git a/include/asm-m32r/syscall.h b/include/asm-m32r/syscall.h deleted file mode 100644 index 25f316f..0000000 --- a/include/asm-m32r/syscall.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_M32R_SYSCALL_H -#define _ASM_M32R_SYSCALL_H - -/* Definitions for the system call vector. */ -#define SYSCALL_VECTOR "2" -#define SYSCALL_VECTOR_ADDRESS "0xa0" - -#endif /* _ASM_M32R_SYSCALL_H */ diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h deleted file mode 100644 index c980f5b..0000000 --- a/include/asm-m32r/system.h +++ /dev/null @@ -1,431 +0,0 @@ -#ifndef _ASM_M32R_SYSTEM_H -#define _ASM_M32R_SYSTEM_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto - * Copyright (C) 2004, 2006 Hirokazu Takata - */ - -#include -#include - -#ifdef __KERNEL__ - -/* - * switch_to(prev, next) should switch from task `prev' to `next' - * `prev' will never be the same as `next'. - * - * `next' and `prev' should be struct task_struct, but it isn't always defined - */ - -#if defined(CONFIG_FRAME_POINTER) || \ - !defined(CONFIG_SCHED_OMIT_FRAME_POINTER) -#define M32R_PUSH_FP " push fp\n" -#define M32R_POP_FP " pop fp\n" -#else -#define M32R_PUSH_FP "" -#define M32R_POP_FP "" -#endif - -#define switch_to(prev, next, last) do { \ - __asm__ __volatile__ ( \ - " seth lr, #high(1f) \n" \ - " or3 lr, lr, #low(1f) \n" \ - " st lr, @%4 ; store old LR \n" \ - " ld lr, @%5 ; load new LR \n" \ - M32R_PUSH_FP \ - " st sp, @%2 ; store old SP \n" \ - " ld sp, @%3 ; load new SP \n" \ - " push %1 ; store `prev' on new stack \n" \ - " jmp lr \n" \ - " .fillinsn \n" \ - "1: \n" \ - " pop %0 ; restore `__last' from new stack \n" \ - M32R_POP_FP \ - : "=r" (last) \ - : "0" (prev), \ - "r" (&(prev->thread.sp)), "r" (&(next->thread.sp)), \ - "r" (&(prev->thread.lr)), "r" (&(next->thread.lr)) \ - : "memory", "lr" \ - ); \ -} while(0) - -/* Interrupt Control */ -#if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104) -#define local_irq_enable() \ - __asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory") -#define local_irq_disable() \ - __asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory") -#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ -static inline void local_irq_enable(void) -{ - unsigned long tmpreg; - __asm__ __volatile__( - "mvfc %0, psw; \n\t" - "or3 %0, %0, #0x0040; \n\t" - "mvtc %0, psw; \n\t" - : "=&r" (tmpreg) : : "cbit", "memory"); -} - -static inline void local_irq_disable(void) -{ - unsigned long tmpreg0, tmpreg1; - __asm__ __volatile__( - "ld24 %0, #0 ; Use 32-bit insn. \n\t" - "mvfc %1, psw ; No interrupt can be accepted here. \n\t" - "mvtc %0, psw \n\t" - "and3 %0, %1, #0xffbf \n\t" - "mvtc %0, psw \n\t" - : "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory"); -} -#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ - -#define local_save_flags(x) \ - __asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */) - -#define local_irq_restore(x) \ - __asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \ - : "r" (x) : "cbit", "memory") - -#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) -#define local_irq_save(x) \ - __asm__ __volatile__( \ - "mvfc %0, psw; \n\t" \ - "clrpsw #0x40 -> nop; \n\t" \ - : "=r" (x) : /* no input */ : "memory") -#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ -#define local_irq_save(x) \ - ({ \ - unsigned long tmpreg; \ - __asm__ __volatile__( \ - "ld24 %1, #0 \n\t" \ - "mvfc %0, psw \n\t" \ - "mvtc %1, psw \n\t" \ - "and3 %1, %0, #0xffbf \n\t" \ - "mvtc %1, psw \n\t" \ - : "=r" (x), "=&r" (tmpreg) \ - : : "cbit", "memory"); \ - }) -#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ - -#define irqs_disabled() \ - ({ \ - unsigned long flags; \ - local_save_flags(flags); \ - !(flags & 0x40); \ - }) - -#define nop() __asm__ __volatile__ ("nop" : : ) - -#define xchg(ptr, x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) -#define xchg_local(ptr, x) \ - ((__typeof__(*(ptr)))__xchg_local((unsigned long)(x), (ptr), \ - sizeof(*(ptr)))) - -extern void __xchg_called_with_bad_pointer(void); - -#ifdef CONFIG_CHIP_M32700_TS1 -#define DCACHE_CLEAR(reg0, reg1, addr) \ - "seth "reg1", #high(dcache_dummy); \n\t" \ - "or3 "reg1", "reg1", #low(dcache_dummy); \n\t" \ - "lock "reg0", @"reg1"; \n\t" \ - "add3 "reg0", "addr", #0x1000; \n\t" \ - "ld "reg0", @"reg0"; \n\t" \ - "add3 "reg0", "addr", #0x2000; \n\t" \ - "ld "reg0", @"reg0"; \n\t" \ - "unlock "reg0", @"reg1"; \n\t" - /* FIXME: This workaround code cannot handle kernel modules - * correctly under SMP environment. - */ -#else /* CONFIG_CHIP_M32700_TS1 */ -#define DCACHE_CLEAR(reg0, reg1, addr) -#endif /* CONFIG_CHIP_M32700_TS1 */ - -static __always_inline unsigned long -__xchg(unsigned long x, volatile void *ptr, int size) -{ - unsigned long flags; - unsigned long tmp = 0; - - local_irq_save(flags); - - switch (size) { -#ifndef CONFIG_SMP - case 1: - __asm__ __volatile__ ( - "ldb %0, @%2 \n\t" - "stb %1, @%2 \n\t" - : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); - break; - case 2: - __asm__ __volatile__ ( - "ldh %0, @%2 \n\t" - "sth %1, @%2 \n\t" - : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); - break; - case 4: - __asm__ __volatile__ ( - "ld %0, @%2 \n\t" - "st %1, @%2 \n\t" - : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); - break; -#else /* CONFIG_SMP */ - case 4: - __asm__ __volatile__ ( - DCACHE_CLEAR("%0", "r4", "%2") - "lock %0, @%2; \n\t" - "unlock %1, @%2; \n\t" - : "=&r" (tmp) : "r" (x), "r" (ptr) - : "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - break; -#endif /* CONFIG_SMP */ - default: - __xchg_called_with_bad_pointer(); - } - - local_irq_restore(flags); - - return (tmp); -} - -static __always_inline unsigned long -__xchg_local(unsigned long x, volatile void *ptr, int size) -{ - unsigned long flags; - unsigned long tmp = 0; - - local_irq_save(flags); - - switch (size) { - case 1: - __asm__ __volatile__ ( - "ldb %0, @%2 \n\t" - "stb %1, @%2 \n\t" - : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); - break; - case 2: - __asm__ __volatile__ ( - "ldh %0, @%2 \n\t" - "sth %1, @%2 \n\t" - : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); - break; - case 4: - __asm__ __volatile__ ( - "ld %0, @%2 \n\t" - "st %1, @%2 \n\t" - : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory"); - break; - default: - __xchg_called_with_bad_pointer(); - } - - local_irq_restore(flags); - - return (tmp); -} - -#define __HAVE_ARCH_CMPXCHG 1 - -static inline unsigned long -__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new) -{ - unsigned long flags; - unsigned int retval; - - local_irq_save(flags); - __asm__ __volatile__ ( - DCACHE_CLEAR("%0", "r4", "%1") - M32R_LOCK" %0, @%1; \n" - " bne %0, %2, 1f; \n" - M32R_UNLOCK" %3, @%1; \n" - " bra 2f; \n" - " .fillinsn \n" - "1:" - M32R_UNLOCK" %0, @%1; \n" - " .fillinsn \n" - "2:" - : "=&r" (retval) - : "r" (p), "r" (old), "r" (new) - : "cbit", "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return retval; -} - -static inline unsigned long -__cmpxchg_local_u32(volatile unsigned int *p, unsigned int old, - unsigned int new) -{ - unsigned long flags; - unsigned int retval; - - local_irq_save(flags); - __asm__ __volatile__ ( - DCACHE_CLEAR("%0", "r4", "%1") - "ld %0, @%1; \n" - " bne %0, %2, 1f; \n" - "st %3, @%1; \n" - " bra 2f; \n" - " .fillinsn \n" - "1:" - "st %0, @%1; \n" - " .fillinsn \n" - "2:" - : "=&r" (retval) - : "r" (p), "r" (old), "r" (new) - : "cbit", "memory" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r4" -#endif /* CONFIG_CHIP_M32700_TS1 */ - ); - local_irq_restore(flags); - - return retval; -} - -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid cmpxchg(). */ -extern void __cmpxchg_called_with_bad_pointer(void); - -static inline unsigned long -__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); -#if 0 /* we don't have __cmpxchg_u64 */ - case 8: - return __cmpxchg_u64(ptr, old, new); -#endif /* 0 */ - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) - -#include - -static inline unsigned long __cmpxchg_local(volatile void *ptr, - unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 4: - return __cmpxchg_local_u32(ptr, old, new); - default: - return __cmpxchg_local_generic(ptr, old, new, size); - } - - return old; -} - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#endif /* __KERNEL__ */ - -/* - * Memory barrier. - * - * mb() prevents loads and stores being reordered across this point. - * rmb() prevents loads being reordered across this point. - * wmb() prevents stores being reordered across this point. - */ -#define mb() barrier() -#define rmb() mb() -#define wmb() mb() - -/** - * read_barrier_depends - Flush all pending reads that subsequents reads - * depend on. - * - * No data-dependent reads from memory-like regions are ever reordered - * over this barrier. All reads preceding this primitive are guaranteed - * to access memory (but not necessarily other CPUs' caches) before any - * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than - * rmb() on most CPUs, and is never heavier weight than is - * rmb(). - * - * These ordering constraints are respected by both the local CPU - * and the compiler. - * - * Ordering is not guaranteed by anything other than these primitives, - * not even by data dependencies. See the documentation for - * memory_barrier() for examples and URLs to more information. - * - * For example, the following code would force ordering (the initial - * value of "a" is zero, "b" is one, and "p" is "&a"): - * - * - * CPU 0 CPU 1 - * - * b = 2; - * memory_barrier(); - * p = &b; q = p; - * read_barrier_depends(); - * d = *q; - * - * - * - * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, - * the following code, with the same initial values for "a" and "b": - * - * - * CPU 0 CPU 1 - * - * a = 2; - * memory_barrier(); - * b = 3; y = b; - * read_barrier_depends(); - * x = a; - * - * - * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such - * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() - * in cases like this where there are no data dependencies. - **/ - -#define read_barrier_depends() do { } while (0) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while (0) -#define set_mb(var, value) do { var = value; barrier(); } while (0) -#endif - -#define arch_align_stack(x) (x) - -#endif /* _ASM_M32R_SYSTEM_H */ diff --git a/include/asm-m32r/termbits.h b/include/asm-m32r/termbits.h deleted file mode 100644 index bc10400..0000000 --- a/include/asm-m32r/termbits.h +++ /dev/null @@ -1,199 +0,0 @@ -#ifndef _ASM_M32R_TERMBITS_H -#define _ASM_M32R_TERMBITS_H - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /** input baud rate */ -#define CTVB 004000000000 /* VisioBraille Terminal flow control */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_M32R_TERMBITS_H */ diff --git a/include/asm-m32r/termios.h b/include/asm-m32r/termios.h deleted file mode 100644 index 93ce79f..0000000 --- a/include/asm-m32r/termios.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef _M32R_TERMIOS_H -#define _M32R_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ -#include - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* _M32R_TERMIOS_H */ diff --git a/include/asm-m32r/thread_info.h b/include/asm-m32r/thread_info.h deleted file mode 100644 index 8589d46..0000000 --- a/include/asm-m32r/thread_info.h +++ /dev/null @@ -1,184 +0,0 @@ -#ifndef _ASM_M32R_THREAD_INFO_H -#define _ASM_M32R_THREAD_INFO_H - -/* thread_info.h: m32r low-level thread information - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - * Copyright (C) 2004 Hirokazu Takata - */ - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#include -#endif - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants must also be changed - */ -#ifndef __ASSEMBLY__ - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF for user-thread - 0-0xFFFFFFFF for kernel-thread - */ - struct restart_block restart_block; - - __u8 supervisor_stack[0]; -}; - -#else /* !__ASSEMBLY__ */ - -/* offsets into the thread_info struct for assembly code access */ -#define TI_TASK 0x00000000 -#define TI_EXEC_DOMAIN 0x00000004 -#define TI_FLAGS 0x00000008 -#define TI_STATUS 0x0000000C -#define TI_CPU 0x00000010 -#define TI_PRE_COUNT 0x00000014 -#define TI_ADDR_LIMIT 0x00000018 -#define TI_RESTART_BLOCK 0x000001C - -#endif - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -#define THREAD_SIZE (2*PAGE_SIZE) - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - - __asm__ __volatile__ ( - "ldi %0, #%1 \n\t" - "and %0, sp \n\t" - : "=r" (ti) : "i" (~(THREAD_SIZE - 1)) - ); - - return ti; -} - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) \ - ({ \ - struct thread_info *ret; \ - \ - ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ - \ - ret; \ - }) -#else -#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) -#endif - -#define free_thread_info(info) kfree(info) - -#define TI_FLAG_FAULT_CODE_SHIFT 28 - -static inline void set_thread_fault_code(unsigned int val) -{ - struct thread_info *ti = current_thread_info(); - ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT))) - | (val << TI_FLAG_FAULT_CODE_SHIFT); -} - -static inline unsigned int get_thread_fault_code(void) -{ - struct thread_info *ti = current_thread_info(); - return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT; -} - -#else /* !__ASSEMBLY__ */ - -#define THREAD_SIZE 8192 - -/* how to get the thread information struct from ASM */ -#define GET_THREAD_INFO(reg) GET_THREAD_INFO reg - .macro GET_THREAD_INFO reg - ldi \reg, #-THREAD_SIZE - and \reg, sp - .endm - -#endif - -/* - * thread information flags - * - these are process state flags that various assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */ -#define TIF_IRET 4 /* return with iret */ -#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ -#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ -#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 18 /* OOM killer killed process */ -#define TIF_FREEZE 19 /* is freezing for suspend */ - -#define _TIF_SYSCALL_TRACE (1<mm) - -#include - -#endif /* _M32R_TLB_H */ diff --git a/include/asm-m32r/tlbflush.h b/include/asm-m32r/tlbflush.h deleted file mode 100644 index 0ef9530..0000000 --- a/include/asm-m32r/tlbflush.h +++ /dev/null @@ -1,97 +0,0 @@ -#ifndef _ASM_M32R_TLBFLUSH_H -#define _ASM_M32R_TLBFLUSH_H - -#include - -/* - * TLB flushing: - * - * - flush_tlb() flushes the current mm struct TLBs - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - */ - -extern void local_flush_tlb_all(void); -extern void local_flush_tlb_mm(struct mm_struct *); -extern void local_flush_tlb_page(struct vm_area_struct *, unsigned long); -extern void local_flush_tlb_range(struct vm_area_struct *, unsigned long, - unsigned long); - -#ifndef CONFIG_SMP -#ifdef CONFIG_MMU -#define flush_tlb_all() local_flush_tlb_all() -#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) -#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) -#define flush_tlb_range(vma, start, end) \ - local_flush_tlb_range(vma, start, end) -#define flush_tlb_kernel_range(start, end) local_flush_tlb_all() -#else /* CONFIG_MMU */ -#define flush_tlb_all() do { } while (0) -#define flush_tlb_mm(mm) do { } while (0) -#define flush_tlb_page(vma, vmaddr) do { } while (0) -#define flush_tlb_range(vma, start, end) do { } while (0) -#endif /* CONFIG_MMU */ -#else /* CONFIG_SMP */ -extern void smp_flush_tlb_all(void); -extern void smp_flush_tlb_mm(struct mm_struct *); -extern void smp_flush_tlb_page(struct vm_area_struct *, unsigned long); -extern void smp_flush_tlb_range(struct vm_area_struct *, unsigned long, - unsigned long); - -#define flush_tlb_all() smp_flush_tlb_all() -#define flush_tlb_mm(mm) smp_flush_tlb_mm(mm) -#define flush_tlb_page(vma, page) smp_flush_tlb_page(vma, page) -#define flush_tlb_range(vma, start, end) \ - smp_flush_tlb_range(vma, start, end) -#define flush_tlb_kernel_range(start, end) smp_flush_tlb_all() -#endif /* CONFIG_SMP */ - -static __inline__ void __flush_tlb_page(unsigned long page) -{ - unsigned int tmpreg0, tmpreg1, tmpreg2; - - __asm__ __volatile__ ( - "seth %0, #high(%4) \n\t" - "st %3, @(%5, %0) \n\t" - "ldi %1, #1 \n\t" - "st %1, @(%6, %0) \n\t" - "add3 %1, %0, %7 \n\t" - ".fillinsn \n" - "1: \n\t" - "ld %2, @(%6, %0) \n\t" - "bnez %2, 1b \n\t" - "ld %0, @%1+ \n\t" - "ld %1, @%1 \n\t" - "st %2, @+%0 \n\t" - "st %2, @+%1 \n\t" - : "=&r" (tmpreg0), "=&r" (tmpreg1), "=&r" (tmpreg2) - : "r" (page), "i" (MMU_REG_BASE), "i" (MSVA_offset), - "i" (MTOP_offset), "i" (MIDXI_offset) - : "memory" - ); -} - -static __inline__ void __flush_tlb_all(void) -{ - unsigned int tmpreg0, tmpreg1; - - __asm__ __volatile__ ( - "seth %0, #high(%2) \n\t" - "or3 %0, %0, #low(%2) \n\t" - "ldi %1, #0xc \n\t" - "st %1, @%0 \n\t" - ".fillinsn \n" - "1: \n\t" - "ld %1, @%0 \n\t" - "bnez %1, 1b \n\t" - : "=&r" (tmpreg0), "=&r" (tmpreg1) - : "i" (MTOP) : "memory" - ); -} - -extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); - -#endif /* _ASM_M32R_TLBFLUSH_H */ diff --git a/include/asm-m32r/topology.h b/include/asm-m32r/topology.h deleted file mode 100644 index d607eb3..0000000 --- a/include/asm-m32r/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M32R_TOPOLOGY_H -#define _ASM_M32R_TOPOLOGY_H - -#include - -#endif /* _ASM_M32R_TOPOLOGY_H */ diff --git a/include/asm-m32r/types.h b/include/asm-m32r/types.h deleted file mode 100644 index bc9f7ff..0000000 --- a/include/asm-m32r/types.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _ASM_M32R_TYPES_H -#define _ASM_M32R_TYPES_H - -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* DMA addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; -typedef u64 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_M32R_TYPES_H */ diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h deleted file mode 100644 index 1c7047b..0000000 --- a/include/asm-m32r/uaccess.h +++ /dev/null @@ -1,693 +0,0 @@ -#ifndef _ASM_M32R_UACCESS_H -#define _ASM_M32R_UACCESS_H - -/* - * linux/include/asm-m32r/uaccess.h - * - * M32R version. - * Copyright (C) 2004, 2006 Hirokazu Takata - */ - -/* - * User space memory access functions - */ -#include -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#ifdef CONFIG_MMU - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#else /* not CONFIG_MMU */ - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(0xFFFFFFFF) -#define get_ds() (KERNEL_DS) - -static inline mm_segment_t get_fs(void) -{ - return USER_DS; -} - -static inline void set_fs(mm_segment_t s) -{ -} - -#endif /* not CONFIG_MMU */ - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * Test whether a block of memory is a valid user space address. - * Returns 0 if the range is valid, nonzero otherwise. - * - * This is equivalent to the following test: - * (u33)addr + (u33)size >= (u33)current->addr_limit.seg - * - * This needs 33-bit arithmetic. We have a carry... - */ -#define __range_ok(addr,size) ({ \ - unsigned long flag, roksum; \ - __chk_user_ptr(addr); \ - asm ( \ - " cmpu %1, %1 ; clear cbit\n" \ - " addx %1, %3 ; set cbit if overflow\n" \ - " subx %0, %0\n" \ - " cmpu %4, %1\n" \ - " subx %0, %5\n" \ - : "=&r" (flag), "=r" (roksum) \ - : "1" (addr), "r" ((int)(size)), \ - "r" (current_thread_info()->addr_limit.seg), "r" (0) \ - : "cbit" ); \ - flag; }) - -/** - * access_ok: - Checks if a user space pointer is valid - * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that - * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe - * to write to a block, it is always safe to read from it. - * @addr: User space pointer to start of block to check - * @size: Size of block to check - * - * Context: User context only. This function may sleep. - * - * Checks if a pointer to a block of memory in user space is valid. - * - * Returns true (nonzero) if the memory block may be valid, false (zero) - * if it is definitely invalid. - * - * Note that, depending on architecture, this function probably just - * checks that the pointer is in the user space range - after calling - * this function, memory access functions may still return -EFAULT. - */ -#ifdef CONFIG_MMU -#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0)) -#else -static inline int access_ok(int type, const void *addr, unsigned long size) -{ - unsigned long val = (unsigned long)addr; - - return ((val >= memory_start) && ((val + size) < memory_end)); -} -#endif /* CONFIG_MMU */ - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int fixup_exception(struct pt_regs *regs); - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the uglyness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - */ - -/* Careful: we have to cast the result to the type of the pointer for sign - reasons */ -/** - * get_user: - Get a simple variable from user space. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define get_user(x,ptr) \ - __get_user_check((x),(ptr),sizeof(*(ptr))) - -/** - * put_user: - Write a simple value into user space. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Returns zero on success, or -EFAULT on error. - */ -#define put_user(x,ptr) \ - __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - -/** - * __get_user: - Get a simple variable from user space, with less checking. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err = 0; \ - unsigned long __gu_val; \ - might_sleep(); \ - __get_user_size(__gu_val,(ptr),(size),__gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_READ,__gu_addr,size)) \ - __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: __get_user_asm(x,ptr,retval,"ub"); break; \ - case 2: __get_user_asm(x,ptr,retval,"uh"); break; \ - case 4: __get_user_asm(x,ptr,retval,""); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_asm(x, addr, err, itype) \ - __asm__ __volatile__( \ - " .fillinsn\n" \ - "1: ld"itype" %1,@%2\n" \ - " .fillinsn\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "3: ldi %0,%3\n" \ - " seth r14,#high(2b)\n" \ - " or3 r14,r14,#low(2b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=&r" (err), "=&r" (x) \ - : "r" (addr), "i" (-EFAULT), "0" (err) \ - : "r14", "memory") - -/** - * __put_user: - Write a simple value into user space, with less checking. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - */ -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - might_sleep(); \ - __put_user_size((x),(ptr),(size),__pu_err); \ - __pu_err; \ -}) - - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err); \ - __pu_err; \ -}) - -#if defined(__LITTLE_ENDIAN__) -#define __put_user_u64(x, addr, err) \ - __asm__ __volatile__( \ - " .fillinsn\n" \ - "1: st %L1,@%2\n" \ - " .fillinsn\n" \ - "2: st %H1,@(4,%2)\n" \ - " .fillinsn\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "4: ldi %0,%3\n" \ - " seth r14,#high(3b)\n" \ - " or3 r14,r14,#low(3b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=&r" (err) \ - : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ - : "r14", "memory") - -#elif defined(__BIG_ENDIAN__) -#define __put_user_u64(x, addr, err) \ - __asm__ __volatile__( \ - " .fillinsn\n" \ - "1: st %H1,@%2\n" \ - " .fillinsn\n" \ - "2: st %L1,@(4,%2)\n" \ - " .fillinsn\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "4: ldi %0,%3\n" \ - " seth r14,#high(3b)\n" \ - " or3 r14,r14,#low(3b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=&r" (err) \ - : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ - : "r14", "memory") -#else -#error no endian defined -#endif - -extern void __put_user_bad(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: __put_user_asm(x,ptr,retval,"b"); break; \ - case 2: __put_user_asm(x,ptr,retval,"h"); break; \ - case 4: __put_user_asm(x,ptr,retval,""); break; \ - case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\ - default: __put_user_bad(); \ - } \ -} while (0) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) - -/* - * Tell gcc we read from memory instead of writing: this is because - * we do not write to any memory gcc knows about, so there are no - * aliasing issues. - */ -#define __put_user_asm(x, addr, err, itype) \ - __asm__ __volatile__( \ - " .fillinsn\n" \ - "1: st"itype" %1,@%2\n" \ - " .fillinsn\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "3: ldi %0,%3\n" \ - " seth r14,#high(2b)\n" \ - " or3 r14,r14,#low(2b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=&r" (err) \ - : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \ - : "r14", "memory") - -/* - * Here we special-case 1, 2 and 4-byte copy_*_user invocations. On a fault - * we return the initial request size (1, 2 or 4), as copy_*_user should do. - * If a store crosses a page boundary and gets a fault, the m32r will not write - * anything, so this is accurate. - */ - -/* - * Copy To/From Userspace - */ - -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied. */ -#define __copy_user(to,from,size) \ -do { \ - unsigned long __dst, __src, __c; \ - __asm__ __volatile__ ( \ - " mv r14, %0\n" \ - " or r14, %1\n" \ - " beq %0, %1, 9f\n" \ - " beqz %2, 9f\n" \ - " and3 r14, r14, #3\n" \ - " bnez r14, 2f\n" \ - " and3 %2, %2, #3\n" \ - " beqz %3, 2f\n" \ - " addi %0, #-4 ; word_copy \n" \ - " .fillinsn\n" \ - "0: ld r14, @%1+\n" \ - " addi %3, #-1\n" \ - " .fillinsn\n" \ - "1: st r14, @+%0\n" \ - " bnez %3, 0b\n" \ - " beqz %2, 9f\n" \ - " addi %0, #4\n" \ - " .fillinsn\n" \ - "2: ldb r14, @%1 ; byte_copy \n" \ - " .fillinsn\n" \ - "3: stb r14, @%0\n" \ - " addi %1, #1\n" \ - " addi %2, #-1\n" \ - " addi %0, #1\n" \ - " bnez %2, 2b\n" \ - " .fillinsn\n" \ - "9:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "5: addi %3, #1\n" \ - " addi %1, #-4\n" \ - " .fillinsn\n" \ - "6: slli %3, #2\n" \ - " add %2, %3\n" \ - " addi %0, #4\n" \ - " .fillinsn\n" \ - "7: seth r14, #high(9b)\n" \ - " or3 r14, r14, #low(9b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,6b\n" \ - " .long 1b,5b\n" \ - " .long 2b,9b\n" \ - " .long 3b,9b\n" \ - ".previous\n" \ - : "=&r" (__dst), "=&r" (__src), "=&r" (size), \ - "=&r" (__c) \ - : "0" (to), "1" (from), "2" (size), "3" (size / 4) \ - : "r14", "memory"); \ -} while (0) - -#define __copy_user_zeroing(to,from,size) \ -do { \ - unsigned long __dst, __src, __c; \ - __asm__ __volatile__ ( \ - " mv r14, %0\n" \ - " or r14, %1\n" \ - " beq %0, %1, 9f\n" \ - " beqz %2, 9f\n" \ - " and3 r14, r14, #3\n" \ - " bnez r14, 2f\n" \ - " and3 %2, %2, #3\n" \ - " beqz %3, 2f\n" \ - " addi %0, #-4 ; word_copy \n" \ - " .fillinsn\n" \ - "0: ld r14, @%1+\n" \ - " addi %3, #-1\n" \ - " .fillinsn\n" \ - "1: st r14, @+%0\n" \ - " bnez %3, 0b\n" \ - " beqz %2, 9f\n" \ - " addi %0, #4\n" \ - " .fillinsn\n" \ - "2: ldb r14, @%1 ; byte_copy \n" \ - " .fillinsn\n" \ - "3: stb r14, @%0\n" \ - " addi %1, #1\n" \ - " addi %2, #-1\n" \ - " addi %0, #1\n" \ - " bnez %2, 2b\n" \ - " .fillinsn\n" \ - "9:\n" \ - ".section .fixup,\"ax\"\n" \ - " .balign 4\n" \ - "5: addi %3, #1\n" \ - " addi %1, #-4\n" \ - " .fillinsn\n" \ - "6: slli %3, #2\n" \ - " add %2, %3\n" \ - " addi %0, #4\n" \ - " .fillinsn\n" \ - "7: ldi r14, #0 ; store zero \n" \ - " .fillinsn\n" \ - "8: addi %2, #-1\n" \ - " stb r14, @%0 ; ACE? \n" \ - " addi %0, #1\n" \ - " bnez %2, 8b\n" \ - " seth r14, #high(9b)\n" \ - " or3 r14, r14, #low(9b)\n" \ - " jmp r14\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,6b\n" \ - " .long 1b,5b\n" \ - " .long 2b,7b\n" \ - " .long 3b,7b\n" \ - ".previous\n" \ - : "=&r" (__dst), "=&r" (__src), "=&r" (size), \ - "=&r" (__c) \ - : "0" (to), "1" (from), "2" (size), "3" (size / 4) \ - : "r14", "memory"); \ -} while (0) - - -/* We let the __ versions of copy_from/to_user inline, because they're often - * used in fast paths and have only a small space overhead. - */ -static inline unsigned long __generic_copy_from_user_nocheck(void *to, - const void __user *from, unsigned long n) -{ - __copy_user_zeroing(to,from,n); - return n; -} - -static inline unsigned long __generic_copy_to_user_nocheck(void __user *to, - const void *from, unsigned long n) -{ - __copy_user(to,from,n); - return n; -} - -unsigned long __generic_copy_to_user(void __user *, const void *, unsigned long); -unsigned long __generic_copy_from_user(void *, const void __user *, unsigned long); - -/** - * __copy_to_user: - Copy a block of data into user space, with less checking. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -#define __copy_to_user(to,from,n) \ - __generic_copy_to_user_nocheck((to),(from),(n)) - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/** - * copy_to_user: - Copy a block of data into user space. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -#define copy_to_user(to,from,n) \ -({ \ - might_sleep(); \ - __generic_copy_to_user((to),(from),(n)); \ -}) - -/** - * __copy_from_user: - Copy a block of data from user space, with less checking. * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -#define __copy_from_user(to,from,n) \ - __generic_copy_from_user_nocheck((to),(from),(n)) - -/** - * copy_from_user: - Copy a block of data from user space. - * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -#define copy_from_user(to,from,n) \ -({ \ - might_sleep(); \ - __generic_copy_from_user((to),(from),(n)); \ -}) - -long __must_check strncpy_from_user(char *dst, const char __user *src, - long count); -long __must_check __strncpy_from_user(char *dst, - const char __user *src, long count); - -/** - * __clear_user: - Zero a block of memory in user space, with less checking. - * @to: Destination address, in user space. - * @n: Number of bytes to zero. - * - * Zero a block of memory in user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be cleared. - * On success, this will be zero. - */ -unsigned long __clear_user(void __user *mem, unsigned long len); - -/** - * clear_user: - Zero a block of memory in user space. - * @to: Destination address, in user space. - * @n: Number of bytes to zero. - * - * Zero a block of memory in user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be cleared. - * On success, this will be zero. - */ -unsigned long clear_user(void __user *mem, unsigned long len); - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) -long strnlen_user(const char __user *str, long n); - -#endif /* _ASM_M32R_UACCESS_H */ diff --git a/include/asm-m32r/ucontext.h b/include/asm-m32r/ucontext.h deleted file mode 100644 index 0932474..0000000 --- a/include/asm-m32r/ucontext.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_M32R_UCONTEXT_H -#define _ASM_M32R_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _ASM_M32R_UCONTEXT_H */ diff --git a/include/asm-m32r/unaligned.h b/include/asm-m32r/unaligned.h deleted file mode 100644 index 377eb20..0000000 --- a/include/asm-m32r/unaligned.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_M32R_UNALIGNED_H -#define _ASM_M32R_UNALIGNED_H - -#if defined(__LITTLE_ENDIAN__) -# include -# include -# include -# define get_unaligned __get_unaligned_le -# define put_unaligned __put_unaligned_le -#else -# include -# include -# include -# define get_unaligned __get_unaligned_be -# define put_unaligned __put_unaligned_be -#endif - -#endif /* _ASM_M32R_UNALIGNED_H */ diff --git a/include/asm-m32r/unistd.h b/include/asm-m32r/unistd.h deleted file mode 100644 index cf701c9..0000000 --- a/include/asm-m32r/unistd.h +++ /dev/null @@ -1,389 +0,0 @@ -#ifndef _ASM_M32R_UNISTD_H -#define _ASM_M32R_UNISTD_H - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -/* 16 is unused */ -/* 17 is unused */ -/* 18 is unused */ -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -/* 23 is unused */ -/* 24 is unused */ -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -/* 28 is unused */ -#define __NR_pause 29 -#define __NR_utime 30 -/* 31 is unused */ -#define __NR_cachectl 32 /* old #define __NR_gtty 32*/ -#define __NR_access 33 -/* 34 is unused */ -/* 35 is unused */ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -/* 44 is unused */ -#define __NR_brk 45 -/* 46 is unused */ -/* 47 is unused (getgid16) */ -/* 48 is unused */ -/* 49 is unused */ -/* 50 is unused */ -#define __NR_acct 51 -#define __NR_umount2 52 -/* 53 is unused */ -#define __NR_ioctl 54 -/* 55 is unused (fcntl) */ -/* 56 is unused */ -#define __NR_setpgid 57 -/* 58 is unused */ -/* 59 is unused */ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -/* 67 is unused */ -/* 68 is unused*/ -/* 69 is unused*/ -/* 70 is unused */ -/* 71 is unused */ -/* 72 is unused */ -/* 73 is unused */ -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -/* 76 is unused (old getrlimit) */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -/* 80 is unused */ -/* 81 is unused */ -/* 82 is unused */ -#define __NR_symlink 83 -/* 84 is unused */ -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -/* 89 is unused */ -/* 90 is unused */ -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -/* 95 is unused */ -#define __NR_getpriority 96 -#define __NR_setpriority 97 -/* 98 is unused */ -#define __NR_statfs 99 -#define __NR_fstatfs 100 -/* 101 is unused */ -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -/* 109 is unused */ -/* 110 is unused */ -#define __NR_vhangup 111 -/* 112 is unused */ -/* 113 is unused */ -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -/* 119 is unused */ -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -/* 123 is unused */ -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -/* 126 is unused */ -/* 127 is unused */ -#define __NR_init_module 128 -#define __NR_delete_module 129 -/* 130 is unused */ -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -/* 137 is unused */ -/* 138 is unused */ -/* 139 is unused */ -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -/* 164 is unused */ -/* 165 is unused */ -#define __NR_tas 166 -/* 167 is unused */ -#define __NR_poll 168 -#define __NR_nfsservctl 169 -/* 170 is unused */ -/* 171 is unused */ -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -/* 182 is unused */ -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -/* 188 is unused */ -/* 189 is unused */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -/* 222 is unused */ -/* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 -/* 251 is unused */ -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -/* 285 is unused */ -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_ioprio_set 289 -#define __NR_ioprio_get 290 -#define __NR_inotify_init 291 -#define __NR_inotify_add_watch 292 -#define __NR_inotify_rm_watch 293 -#define __NR_migrate_pages 294 -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 -#define __NR_set_robust_list 311 -#define __NR_get_robust_list 312 -#define __NR_splice 313 -#define __NR_sync_file_range 314 -#define __NR_tee 315 -#define __NR_vmsplice 316 -#define __NR_move_pages 317 -#define __NR_getcpu 318 -#define __NR_epoll_pwait 319 -#define __NR_utimensat 320 -#define __NR_signalfd 321 -/* #define __NR_timerfd 322 removed */ -#define __NR_eventfd 323 -#define __NR_fallocate 324 - -#ifdef __KERNEL__ - -#define NR_syscalls 325 - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_OLD_GETRLIMIT /*will be unused*/ -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_RT_SIGACTION - -#define __IGNORE_lchown -#define __IGNORE_setuid -#define __IGNORE_getuid -#define __IGNORE_setgid -#define __IGNORE_getgid -#define __IGNORE_geteuid -#define __IGNORE_getegid -#define __IGNORE_fcntl -#define __IGNORE_setreuid -#define __IGNORE_setregid -#define __IGNORE_getrlimit -#define __IGNORE_getgroups -#define __IGNORE_setgroups -#define __IGNORE_select -#define __IGNORE_mmap -#define __IGNORE_fchown -#define __IGNORE_setfsuid -#define __IGNORE_setfsgid -#define __IGNORE_setresuid -#define __IGNORE_getresuid -#define __IGNORE_setresgid -#define __IGNORE_getresgid -#define __IGNORE_chown - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_M32R_UNISTD_H */ diff --git a/include/asm-m32r/user.h b/include/asm-m32r/user.h deleted file mode 100644 index 03b3c11..0000000 --- a/include/asm-m32r/user.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef _ASM_M32R_USER_H -#define _ASM_M32R_USER_H - -#include -#include -#include - -/* - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd). - * - * The actual file contents are as follows: - * UPAGE: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page. - * DATA: The data area is stored. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * STACK: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these off in order to be - * able to write an integer number of pages. - */ - -struct user { - struct pt_regs regs; /* entire machine state */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* _ASM_M32R_USER_H */ diff --git a/include/asm-m32r/vga.h b/include/asm-m32r/vga.h deleted file mode 100644 index a1b6306..0000000 --- a/include/asm-m32r/vga.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_M32R_VGA_H -#define _ASM_M32R_VGA_H - -/* - * Access to VGA videoram - * - * (c) 1998 Martin Mares - */ - -/* - * On the PC, we can just recalculate addresses and then - * access the videoram directly without any black magic. - */ - -#define VGA_MAP_MEM(x,s) (unsigned long)phys_to_virt(x) - -#define vga_readb(x) (*(x)) -#define vga_writeb(x,y) (*(y) = (x)) - -#endif /* _ASM_M32R_VGA_H */ diff --git a/include/asm-m32r/xor.h b/include/asm-m32r/xor.h deleted file mode 100644 index 6d52525..0000000 --- a/include/asm-m32r/xor.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M32R_XOR_H -#define _ASM_M32R_XOR_H - -#include - -#endif /* _ASM_M32R_XOR_H */ -- cgit v0.10.2 From c03f6a19699fce4389888a45db8245969311d868 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 17 Apr 2009 11:06:30 +1000 Subject: md: update sync_completed and reshape_position even more often. There are circumstances when a user-space process might need to "oversee" a resync/reshape process. For example when doing an in-place reshape of a raid5, it is prudent to take a backup of each section before reshaping it as this is the only way to provide safety against an unplanned shutdown (i.e. crash/power failure). The sync_max sysfs value can be used to stop the resync from advancing beyond a particular point. So user-space can: suspend IO to the first section and back it up set 'sync_max' to the end of the section wait for 'sync_completed' to reach that point resume IO on the first section and move on to the next section. However this process requires the kernel and user-space to run in lock-step which could introduce unnecessary delays. It would be better if a 'double buffered' approach could be used with userspace and kernel space working on different sections with the 'next' section always ready when the 'current' section is finished. One problem with implementing this is that sync_completed is only guaranteed to be updated when the sync process reaches sync_max. (it is updated on a time basis at other times, but it is hard to rely on that). This defeats some of the double buffering. With this patch, sync_completed (and reshape_position) get updated as the current position approaches sync_max, so there is room for userspace to advance sync_max early without losing updates. To be precise, sync_completed is updated when the current sync position reaches half way between the current value of sync_completed and the value of sync_max. This will usually be a good time for user space to update sync_max. If sync_max does not get updated, the updates to sync_completed (together with associated metadata updates) will occur at an exponentially increasing frequency which will get unreasonably fast (one update every page) immediately before the process hits sync_max and stops. So the update rate will be unreasonably fast only for an insignificant period of time. Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 7af64f3..612343f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6347,7 +6347,8 @@ void md_do_sync(mddev_t *mddev) if ((mddev->curr_resync > mddev->curr_resync_completed && (mddev->curr_resync - mddev->curr_resync_completed) > (max_sectors >> 4)) || - j >= mddev->resync_max + (j - mddev->curr_resync_completed)*2 + >= mddev->resync_max - mddev->curr_resync_completed ) { /* time to update curr_resync_completed */ blk_unplug(mddev->queue); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 76892ac..4616bc3 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3940,7 +3940,8 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped * then we need to write out the superblock. */ sector_nr += reshape_sectors; - if (sector_nr >= mddev->resync_max) { + if ((sector_nr - mddev->curr_resync_completed) * 2 + >= mddev->resync_max - mddev->curr_resync_completed) { /* Cannot proceed until we've updated the superblock... */ wait_event(conf->wait_for_overlap, atomic_read(&conf->reshape_stripes) == 0); -- cgit v0.10.2 From ca713c2ab0eea3458962983e4a7e13430ea479b8 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 15 Apr 2009 18:39:13 -0700 Subject: x86/irq: mark NUMA_MIGRATE_IRQ_DESC broken It causes crash on system with lots of cards with MSI-X when irq_balancer enabled... The patches fixing it were both complex and fragile, according to Eric they were also doing quite dangerous things to the hardware. Instead we now have patches that solve this problem via static NUMA node mappings - not dynamic allocation and balancing. The patches are much simpler than this method but are still too large outside of the merge window, so we mark the dynamic balancer as broken for now, and queue up the new approach for v2.6.31. [ Impact: deactivate broken kernel feature ] Reported-by: Suresh Siddha Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: "Eric W. Biederman" Cc: Rusty Russell LKML-Reference: <49E68C41.4020801@kernel.org> Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bc25b9f..b1d2be7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -277,6 +277,7 @@ config SPARSE_IRQ config NUMA_MIGRATE_IRQ_DESC bool "Move irq desc when changing irq smp_affinity" depends on SPARSE_IRQ && NUMA + depends on BROKEN default n ---help--- This enables moving irq_desc to cpu/node that irq will use handled. -- cgit v0.10.2 From 0f4d634c59a4e062bef81c00d9e63333f2a83b46 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 26 Mar 2009 13:35:37 -0400 Subject: cifs: flush data on any setattr We already flush all the dirty pages for an inode before doing ATTR_SIZE and ATTR_MTIME changes. There's another problem though -- if we change the mode so that the file becomes read-only then we may not be able to write data to it after a reconnect. Fix this by just going back to flushing all the dirty data on any setattr call. There are probably some cases that can be optimized out, but I'm not sure they're worthwhile and we need to consider them more carefully to make sure that we don't cause regressions if we have to reconnect before writeback occurs. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index f121a80..89063f1 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1792,20 +1792,21 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) goto out; } - if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) { - /* - Flush data before changing file size or changing the last - write time of the file on the server. If the - flush returns error, store it to report later and continue. - BB: This should be smarter. Why bother flushing pages that - will be truncated anyway? Also, should we error out here if - the flush returns error? - */ - rc = filemap_write_and_wait(inode->i_mapping); - if (rc != 0) { - cifsInode->write_behind_rc = rc; - rc = 0; - } + /* + * Attempt to flush data before changing attributes. We need to do + * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the + * ownership or mode then we may also need to do this. Here, we take + * the safe way out and just do the flush on all setattr requests. If + * the flush returns error, store it to report later and continue. + * + * BB: This should be smarter. Why bother flushing pages that + * will be truncated anyway? Also, should we error out here if + * the flush returns error? + */ + rc = filemap_write_and_wait(inode->i_mapping); + if (rc != 0) { + cifsInode->write_behind_rc = rc; + rc = 0; } if (attrs->ia_valid & ATTR_SIZE) { @@ -1903,20 +1904,21 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs) return -ENOMEM; } - if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) { - /* - Flush data before changing file size or changing the last - write time of the file on the server. If the - flush returns error, store it to report later and continue. - BB: This should be smarter. Why bother flushing pages that - will be truncated anyway? Also, should we error out here if - the flush returns error? - */ - rc = filemap_write_and_wait(inode->i_mapping); - if (rc != 0) { - cifsInode->write_behind_rc = rc; - rc = 0; - } + /* + * Attempt to flush data before changing attributes. We need to do + * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the + * ownership or mode then we may also need to do this. Here, we take + * the safe way out and just do the flush on all setattr requests. If + * the flush returns error, store it to report later and continue. + * + * BB: This should be smarter. Why bother flushing pages that + * will be truncated anyway? Also, should we error out here if + * the flush returns error? + */ + rc = filemap_write_and_wait(inode->i_mapping); + if (rc != 0) { + cifsInode->write_behind_rc = rc; + rc = 0; } if (attrs->ia_valid & ATTR_SIZE) { -- cgit v0.10.2 From 74496d365ad171d11f21da4a8be71c945f6ec825 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 31 Mar 2009 16:28:36 +0800 Subject: cifs: remove some pointless conditionals before kfree() Remove some pointless conditionals before kfree(). Signed-off-by: Wei Yongjun Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0de3b56..b173b01 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2673,8 +2673,7 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses, /* We look for obvious messed up bcc or strings in response so we do not go off the end since (at least) WIN2K and Windows XP have a major bug in not null terminating last Unicode string in response */ - if (ses->serverOS) - kfree(ses->serverOS); + kfree(ses->serverOS); ses->serverOS = kzalloc(2 * (len + 1), GFP_KERNEL); if (ses->serverOS == NULL) @@ -2710,8 +2709,7 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses, len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words); /* last string is not always null terminated (for e.g. for Windows XP & 2000) */ - if (ses->serverDomain) - kfree(ses->serverDomain); + kfree(ses->serverDomain); ses->serverDomain = kzalloc(2*(len+1), GFP_KERNEL); @@ -2725,8 +2723,7 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses, ses->serverDomain[1+(2*len)] = 0; } else { /* else no more room so create dummy domain string */ - if (ses->serverDomain) - kfree(ses->serverDomain); + kfree(ses->serverDomain); ses->serverDomain = kzalloc(2, GFP_KERNEL); } @@ -2772,8 +2769,7 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses, bcc_ptr++; len = strnlen(bcc_ptr, 1024); - if (ses->serverDomain) - kfree(ses->serverDomain); + kfree(ses->serverDomain); ses->serverDomain = kzalloc(len + 1, GFP_KERNEL); if (ses->serverDomain == NULL) @@ -3013,8 +3009,7 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid, /* We look for obvious messed up bcc or strings in response so we do not go off the end since (at least) WIN2K and Windows XP have a major bug in not null terminating last Unicode string in response */ - if (ses->serverOS) - kfree(ses->serverOS); + kfree(ses->serverOS); ses->serverOS = kzalloc(2 * (len + 1), GFP_KERNEL); cifs_strfromUCS_le(ses->serverOS, @@ -3086,8 +3081,7 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid, if (((long) bcc_ptr + len) - (long) pByteArea(smb_buffer_response) <= BCC(smb_buffer_response)) { - if (ses->serverOS) - kfree(ses->serverOS); + kfree(ses->serverOS); ses->serverOS = kzalloc(len + 1, GFP_KERNEL); @@ -3414,8 +3408,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses, /* We look for obvious messed up bcc or strings in response so we do not go off the end since (at least) WIN2K and Windows XP have a major bug in not null terminating last Unicode string in response */ - if (ses->serverOS) - kfree(ses->serverOS); + kfree(ses->serverOS); ses->serverOS = kzalloc(2 * (len + 1), GFP_KERNEL); cifs_strfromUCS_le(ses->serverOS, @@ -3448,8 +3441,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses, if (remaining_words > 0) { len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words); /* last string not always null terminated (e.g. for Windows XP & 2000) */ - if (ses->serverDomain) - kfree(ses->serverDomain); + kfree(ses->serverDomain); ses->serverDomain = kzalloc(2 * (len + @@ -3476,13 +3468,11 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses, = 0; } /* else no more room so create dummy domain string */ else { - if (ses->serverDomain) - kfree(ses->serverDomain); + kfree(ses->serverDomain); ses->serverDomain = kzalloc(2,GFP_KERNEL); } } else { /* no room so create dummy domain and NOS string */ - if (ses->serverDomain) - kfree(ses->serverDomain); + kfree(ses->serverDomain); ses->serverDomain = kzalloc(2, GFP_KERNEL); kfree(ses->serverNOS); ses->serverNOS = kzalloc(2, GFP_KERNEL); @@ -3492,8 +3482,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses, if (((long) bcc_ptr + len) - (long) pByteArea(smb_buffer_response) <= BCC(smb_buffer_response)) { - if (ses->serverOS) - kfree(ses->serverOS); + kfree(ses->serverOS); ses->serverOS = kzalloc(len + 1, GFP_KERNEL); strncpy(ses->serverOS,bcc_ptr, len); @@ -3512,8 +3501,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses, bcc_ptr++; len = strnlen(bcc_ptr, 1024); - if (ses->serverDomain) - kfree(ses->serverDomain); + kfree(ses->serverDomain); ses->serverDomain = kzalloc(len+1, GFP_KERNEL); -- cgit v0.10.2 From 85a6dac54a7e28112488b02523202985edc7e639 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 1 Apr 2009 05:22:00 +0000 Subject: [CIFS] Endian convert UniqueId when reporting inode numbers from server files Jeff made a good point that we should endian convert the UniqueId when we use it to set i_ino Even though this value is opaque to the client, when comparing the inode numbers of the same server file from two different clients (one big endian, one little endian) or when we compare a big endian client's view of i_ino with what the server thinks - we should get the same value Signed-off-by: Steve French diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 6598400..9d1fb6e 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -15,7 +15,8 @@ Posix file open support added (turned off after one attempt if server fails to support it properly, as with Samba server versions prior to 3.3.2) Fix "redzone overwritten" bug in cifs_put_tcon (CIFSTcon may allocate too little memory for the "nativeFileSystem" field returned by the server -during mount). +during mount). Endian convert inode numbers if necessary (makes it easier +to compare inode numbers on network files from big endian systems). Version 1.56 ------------ diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index b370489..a785f69 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -2163,7 +2163,7 @@ typedef struct { __le32 Type; __le64 DevMajor; __le64 DevMinor; - __u64 UniqueId; + __le64 UniqueId; __le64 Permissions; __le64 Nlinks; } __attribute__((packed)) FILE_UNIX_BASIC_INFO; /* level 0x200 QPathInfo */ @@ -2308,7 +2308,7 @@ struct unlink_psx_rq { /* level 0x20a SetPathInfo */ } __attribute__((packed)); struct file_internal_info { - __u64 UniqueId; /* inode number */ + __le64 UniqueId; /* inode number */ } __attribute__((packed)); /* level 0x3ee */ struct file_mode_info { @@ -2338,7 +2338,7 @@ typedef struct { __le32 Type; __le64 DevMajor; __le64 DevMinor; - __u64 UniqueId; + __le64 UniqueId; __le64 Permissions; __le64 Nlinks; char FileName[1]; @@ -2386,7 +2386,7 @@ typedef struct { __le32 FileNameLength; __le32 EaSize; /* EA size */ __le32 Reserved; - __u64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/ + __le64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/ char FileName[1]; } __attribute__((packed)) SEARCH_ID_FULL_DIR_INFO; /* level 0x105 FF rsp data */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index bc09c99..3f36b1e 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3918,7 +3918,7 @@ GetInodeNumberRetry: } pfinfo = (struct file_internal_info *) (data_offset + (char *) &pSMBr->hdr.Protocol); - *inode_number = pfinfo->UniqueId; + *inode_number = le64_to_cpu(pfinfo->UniqueId); } } GetInodeNumOut: diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 54dce78..e457e14 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -187,8 +187,10 @@ int cifs_posix_open(char *full_path, struct inode **pinode, if (!pinode) goto posix_open_ret; /* caller does not need info */ - if (*pinode == NULL) - *pinode = cifs_new_inode(sb, &presp_data->UniqueId); + if (*pinode == NULL) { + __u64 unique_id = le64_to_cpu(presp_data->UniqueId); + *pinode = cifs_new_inode(sb, &unique_id); + } /* else an inode was passed in. Update its info, don't create one */ /* We do not need to close the file if new_inode fails since diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 89063f1..fceebee 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -276,7 +276,8 @@ int cifs_get_inode_info_unix(struct inode **pinode, /* get new inode */ if (*pinode == NULL) { - *pinode = cifs_new_inode(sb, &find_data.UniqueId); + __u64 unique_id = le64_to_cpu(find_data.UniqueId); + *pinode = cifs_new_inode(sb, &unique_id); if (*pinode == NULL) { rc = -ENOMEM; goto cgiiu_exit; @@ -1138,6 +1139,7 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode) cFYI(1, ("posix mkdir returned 0x%x", rc)); d_drop(direntry); } else { + __u64 unique_id; if (pInfo->Type == cpu_to_le32(-1)) { /* no return info, go query for it */ kfree(pInfo); @@ -1151,8 +1153,8 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode) else direntry->d_op = &cifs_dentry_ops; - newinode = cifs_new_inode(inode->i_sb, - &pInfo->UniqueId); + unique_id = le64_to_cpu(pInfo->UniqueId); + newinode = cifs_new_inode(inode->i_sb, &unique_id); if (newinode == NULL) { kfree(pInfo); goto mkdir_get_info; diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index c2c01ff..c3c3e62 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -840,7 +840,7 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst, len = strnlen(filename, PATH_MAX); } - *pinum = pFindData->UniqueId; + *pinum = le64_to_cpu(pFindData->UniqueId); } else if (level == SMB_FIND_FILE_DIRECTORY_INFO) { FILE_DIRECTORY_INFO *pFindData = (FILE_DIRECTORY_INFO *)current_entry; @@ -856,7 +856,7 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst, (SEARCH_ID_FULL_DIR_INFO *)current_entry; filename = &pFindData->FileName[0]; len = le32_to_cpu(pFindData->FileNameLength); - *pinum = pFindData->UniqueId; + *pinum = le64_to_cpu(pFindData->UniqueId); } else if (level == SMB_FIND_FILE_BOTH_DIRECTORY_INFO) { FILE_BOTH_DIRECTORY_INFO *pFindData = (FILE_BOTH_DIRECTORY_INFO *)current_entry; -- cgit v0.10.2 From 1bfe73c258addc388b90fe8c2c6bbc0f0c9c10dd Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Wed, 1 Apr 2009 17:54:42 +0400 Subject: Remote DFS root support. Allows to mount share on a server that returns -EREMOTE at the tree connect stage or at the check on a full path accessibility. Signed-off-by: Igor Mammedov Acked-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index b173b01..2e7a4ea 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2214,9 +2214,56 @@ is_path_accessible(int xid, struct cifsTconInfo *tcon, return rc; } +static void +cleanup_volume_info(struct smb_vol **pvolume_info) +{ + struct smb_vol *volume_info; + + if (!pvolume_info && !*pvolume_info) + return; + + volume_info = *pvolume_info; + kzfree(volume_info->password); + kfree(volume_info->UNC); + kfree(volume_info->prepath); + kfree(volume_info); + *pvolume_info = NULL; + return; +} + +/* build_path_to_root returns full path to root when + * we do not have an exiting connection (tcon) */ +static char * +build_unc_path_to_root(const struct smb_vol *volume_info, + const struct cifs_sb_info *cifs_sb) +{ + char *full_path; + + int unc_len = strnlen(volume_info->UNC, MAX_TREE_SIZE + 1); + full_path = kmalloc(unc_len + cifs_sb->prepathlen + 1, GFP_KERNEL); + if (full_path == NULL) + return ERR_PTR(-ENOMEM); + + strncpy(full_path, volume_info->UNC, unc_len); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) { + int i; + for (i = 0; i < unc_len; i++) { + if (full_path[i] == '\\') + full_path[i] = '/'; + } + } + + if (cifs_sb->prepathlen) + strncpy(full_path + unc_len, cifs_sb->prepath, + cifs_sb->prepathlen); + + full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */ + return full_path; +} + int cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, - char *mount_data, const char *devname) + char *mount_data_global, const char *devname) { int rc = 0; int xid; @@ -2225,6 +2272,13 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, struct cifsTconInfo *tcon = NULL; struct TCP_Server_Info *srvTcp = NULL; char *full_path; + struct dfs_info3_param *referrals = NULL; + unsigned int num_referrals = 0; + + char *mount_data = mount_data_global; + +try_mount_again: + full_path = NULL; xid = GetXid(); @@ -2371,11 +2425,9 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - /* check for null share name ie connect to dfs root */ if ((strchr(volume_info->UNC + 3, '\\') == NULL) && (strchr(volume_info->UNC + 3, '/') == NULL)) { - /* rc = connect_to_dfs_path(...) */ - cFYI(1, ("DFS root not supported")); + cERROR(1, ("Missing share name")); rc = -ENODEV; goto mount_fail_check; } else { @@ -2392,7 +2444,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } if (rc) - goto mount_fail_check; + goto remote_path_check; tcon->seal = volume_info->seal; write_lock(&cifs_tcp_ses_lock); list_add(&tcon->tcon_list, &pSesInfo->tcon_list); @@ -2417,19 +2469,9 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* BB FIXME fix time_gran to be larger for LANMAN sessions */ sb->s_time_gran = 100; -mount_fail_check: - /* on error free sesinfo and tcon struct if needed */ - if (rc) { - /* If find_unc succeeded then rc == 0 so we can not end */ - /* up accidently freeing someone elses tcon struct */ - if (tcon) - cifs_put_tcon(tcon); - else if (pSesInfo) - cifs_put_smb_ses(pSesInfo); - else - cifs_put_tcp_session(srvTcp); - goto out; - } + if (rc) + goto remote_path_check; + cifs_sb->tcon = tcon; /* do not care if following two calls succeed - informational */ @@ -2461,7 +2503,9 @@ mount_fail_check: cifs_sb->rsize = min(cifs_sb->rsize, (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE)); - if (!rc && cifs_sb->prepathlen) { +remote_path_check: + /* check if a whole path (including prepath) is not remote */ + if (!rc && cifs_sb->prepathlen && tcon) { /* build_path_to_root works only when we have a valid tcon */ full_path = cifs_build_path_to_root(cifs_sb); if (full_path == NULL) { @@ -2469,31 +2513,75 @@ mount_fail_check: goto mount_fail_check; } rc = is_path_accessible(xid, tcon, cifs_sb, full_path); - if (rc) { - cERROR(1, ("Path %s in not accessible: %d", - full_path, rc)); + if (rc != -EREMOTE) { kfree(full_path); goto mount_fail_check; } kfree(full_path); } + /* get referral if needed */ + if (rc == -EREMOTE) { + /* convert forward to back slashes in prepath here if needed */ + if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) + convert_delimiter(cifs_sb->prepath, + CIFS_DIR_SEP(cifs_sb)); + full_path = build_unc_path_to_root(volume_info, cifs_sb); + if (IS_ERR(full_path)) { + rc = PTR_ERR(full_path); + goto mount_fail_check; + } + + cFYI(1, ("Getting referral for: %s", full_path)); + rc = get_dfs_path(xid, pSesInfo , full_path + 1, + cifs_sb->local_nls, &num_referrals, &referrals, + cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); + if (!rc && num_referrals > 0) { + char *fake_devname = NULL; + + if (mount_data != mount_data_global) + kfree(mount_data); + mount_data = cifs_compose_mount_options( + cifs_sb->mountdata, full_path + 1, + referrals, &fake_devname); + kfree(fake_devname); + free_dfs_info_array(referrals, num_referrals); + + if (tcon) + cifs_put_tcon(tcon); + else if (pSesInfo) + cifs_put_smb_ses(pSesInfo); + + cleanup_volume_info(&volume_info); + FreeXid(xid); + kfree(full_path); + goto try_mount_again; + } + } + +mount_fail_check: + /* on error free sesinfo and tcon struct if needed */ + if (rc) { + if (mount_data != mount_data_global) + kfree(mount_data); + /* If find_unc succeeded then rc == 0 so we can not end */ + /* up accidently freeing someone elses tcon struct */ + if (tcon) + cifs_put_tcon(tcon); + else if (pSesInfo) + cifs_put_smb_ses(pSesInfo); + else + cifs_put_tcp_session(srvTcp); + goto out; + } + /* volume_info->password is freed above when existing session found (in which case it is not needed anymore) but when new sesion is created the password ptr is put in the new session structure (in which case the password will be freed at unmount time) */ out: /* zero out password before freeing */ - if (volume_info) { - if (volume_info->password != NULL) { - memset(volume_info->password, 0, - strlen(volume_info->password)); - kfree(volume_info->password); - } - kfree(volume_info->UNC); - kfree(volume_info->prepath); - kfree(volume_info); - } + cleanup_volume_info(&volume_info); FreeXid(xid); return rc; } -- cgit v0.10.2 From d036f50fc202e1a851a25dc5edc215ebd0086201 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 3 Apr 2009 03:12:08 +0000 Subject: [CIFS] Fix build break from recent DFS patch when DFS support not enabled Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 2e7a4ea..6926023 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2522,6 +2522,7 @@ remote_path_check: /* get referral if needed */ if (rc == -EREMOTE) { +#ifdef CONFIG_CIFS_DFS_UPCALL /* convert forward to back slashes in prepath here if needed */ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) convert_delimiter(cifs_sb->prepath, @@ -2557,6 +2558,9 @@ remote_path_check: kfree(full_path); goto try_mount_again; } +#else /* No DFS support, return error on mount */ + rc = -EOPNOTSUPP; +#endif } mount_fail_check: -- cgit v0.10.2 From fbec9ab952d4810960e620035c8e95f0fbbae4be Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 3 Apr 2009 13:44:00 -0400 Subject: cifs: vary timeout on writes past EOF based on offset (try #5) This is the fourth version of this patch: The first three generated a compiler warning asking for explicit curly braces. The first two didn't handle update the size correctly when writes that didn't start at the eof were done. The first patch also didn't update the size correctly when it explicitly set via truncate(). This patch adds code to track the client's current understanding of the size of the file on the server separate from the i_size, and then to use this info to semi-intelligently set the timeout for writes past the EOF. This helps prevent timeouts when trying to write large, sparse files on windows servers. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 38491fd..34f5701 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -316,6 +316,7 @@ cifs_alloc_inode(struct super_block *sb) cifs_inode->clientCanCacheAll = false; cifs_inode->delete_pending = false; cifs_inode->vfs_inode.i_blkbits = 14; /* 2**14 = CIFS_MAX_MSGSIZE */ + cifs_inode->server_eof = 0; /* Can not set i_flags here - they get immediately overwritten to zero by the VFS */ diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 9fbf4df..7ae1986 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -370,6 +370,7 @@ struct cifsInodeInfo { bool clientCanCacheAll:1; /* read and writebehind oplock */ bool oplockPending:1; bool delete_pending:1; /* DELETE_ON_CLOSE is set */ + u64 server_eof; /* current file size on server */ struct inode vfs_inode; }; diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 3f36b1e..a0845dc 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1626,6 +1626,8 @@ CIFSSMBWrite2(const int xid, struct cifsTconInfo *tcon, int smb_hdr_len; int resp_buf_type = 0; + *nbytes = 0; + cFYI(1, ("write2 at %lld %d bytes", (long long)offset, count)); if (tcon->ses->capabilities & CAP_LARGE_FILES) { @@ -1682,11 +1684,9 @@ CIFSSMBWrite2(const int xid, struct cifsTconInfo *tcon, cifs_stats_inc(&tcon->num_writes); if (rc) { cFYI(1, ("Send error Write2 = %d", rc)); - *nbytes = 0; } else if (resp_buf_type == 0) { /* presumably this can not happen, but best to be safe */ rc = -EIO; - *nbytes = 0; } else { WRITE_RSP *pSMBr = (WRITE_RSP *)iov[0].iov_base; *nbytes = le16_to_cpu(pSMBr->CountHigh); diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 81747ac..dfd3e6c 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -971,6 +971,40 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock) return rc; } +/* + * Set the timeout on write requests past EOF. For some servers (Windows) + * these calls can be very long. + * + * If we're writing >10M past the EOF we give a 180s timeout. Anything less + * than that gets a 45s timeout. Writes not past EOF get 15s timeouts. + * The 10M cutoff is totally arbitrary. A better scheme for this would be + * welcome if someone wants to suggest one. + * + * We may be able to do a better job with this if there were some way to + * declare that a file should be sparse. + */ +static int +cifs_write_timeout(struct cifsInodeInfo *cifsi, loff_t offset) +{ + if (offset <= cifsi->server_eof) + return CIFS_STD_OP; + else if (offset > (cifsi->server_eof + (10 * 1024 * 1024))) + return CIFS_VLONG_OP; + else + return CIFS_LONG_OP; +} + +/* update the file size (if needed) after a write */ +static void +cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset, + unsigned int bytes_written) +{ + loff_t end_of_write = offset + bytes_written; + + if (end_of_write > cifsi->server_eof) + cifsi->server_eof = end_of_write; +} + ssize_t cifs_user_write(struct file *file, const char __user *write_data, size_t write_size, loff_t *poffset) { @@ -981,6 +1015,7 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data, struct cifsTconInfo *pTcon; int xid, long_op; struct cifsFileInfo *open_file; + struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode); cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); @@ -1000,11 +1035,7 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data, xid = GetXid(); - if (*poffset > file->f_path.dentry->d_inode->i_size) - long_op = CIFS_VLONG_OP; /* writes past EOF take long time */ - else - long_op = CIFS_LONG_OP; - + long_op = cifs_write_timeout(cifsi, *poffset); for (total_written = 0; write_size > total_written; total_written += bytes_written) { rc = -EAGAIN; @@ -1048,8 +1079,10 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data, FreeXid(xid); return rc; } - } else + } else { + cifs_update_eof(cifsi, *poffset, bytes_written); *poffset += bytes_written; + } long_op = CIFS_STD_OP; /* subsequent writes fast - 15 seconds is plenty */ } @@ -1085,6 +1118,7 @@ static ssize_t cifs_write(struct file *file, const char *write_data, struct cifsTconInfo *pTcon; int xid, long_op; struct cifsFileInfo *open_file; + struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode); cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); @@ -1099,11 +1133,7 @@ static ssize_t cifs_write(struct file *file, const char *write_data, xid = GetXid(); - if (*poffset > file->f_path.dentry->d_inode->i_size) - long_op = CIFS_VLONG_OP; /* writes past EOF can be slow */ - else - long_op = CIFS_LONG_OP; - + long_op = cifs_write_timeout(cifsi, *poffset); for (total_written = 0; write_size > total_written; total_written += bytes_written) { rc = -EAGAIN; @@ -1166,8 +1196,10 @@ static ssize_t cifs_write(struct file *file, const char *write_data, FreeXid(xid); return rc; } - } else + } else { + cifs_update_eof(cifsi, *poffset, bytes_written); *poffset += bytes_written; + } long_op = CIFS_STD_OP; /* subsequent writes fast - 15 seconds is plenty */ } @@ -1380,11 +1412,12 @@ static int cifs_writepages(struct address_space *mapping, int nr_pages; __u64 offset = 0; struct cifsFileInfo *open_file; + struct cifsInodeInfo *cifsi = CIFS_I(mapping->host); struct page *page; struct pagevec pvec; int rc = 0; int scanned = 0; - int xid; + int xid, long_op; cifs_sb = CIFS_SB(mapping->host->i_sb); @@ -1528,12 +1561,15 @@ retry: cERROR(1, ("No writable handles for inode")); rc = -EBADF; } else { + long_op = cifs_write_timeout(cifsi, offset); rc = CIFSSMBWrite2(xid, cifs_sb->tcon, open_file->netfid, bytes_to_write, offset, &bytes_written, iov, n_iov, - CIFS_LONG_OP); + long_op); atomic_dec(&open_file->wrtPending); + cifs_update_eof(cifsi, offset, bytes_written); + if (rc || bytes_written < bytes_to_write) { cERROR(1, ("Write2 ret %d, wrote %d", rc, bytes_written)); diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fceebee..09082ac 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -143,6 +143,7 @@ static void cifs_unix_info_to_inode(struct inode *inode, inode->i_nlink = le64_to_cpu(info->Nlinks); + cifsInfo->server_eof = end_of_file; spin_lock(&inode->i_lock); if (is_size_safe_to_change(cifsInfo, end_of_file)) { /* @@ -606,12 +607,12 @@ int cifs_get_inode_info(struct inode **pinode, inode->i_mode |= S_IFREG; } + cifsInfo->server_eof = le64_to_cpu(pfindData->EndOfFile); spin_lock(&inode->i_lock); - if (is_size_safe_to_change(cifsInfo, - le64_to_cpu(pfindData->EndOfFile))) { + if (is_size_safe_to_change(cifsInfo, cifsInfo->server_eof)) { /* can not safely shrink the file size here if the client is writing to it due to potential races */ - i_size_write(inode, le64_to_cpu(pfindData->EndOfFile)); + i_size_write(inode, cifsInfo->server_eof); /* 512 bytes (2**9) is the fake blocksize that must be used for this calculation */ @@ -1755,6 +1756,7 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, } if (rc == 0) { + cifsInode->server_eof = attrs->ia_size; rc = cifs_vmtruncate(inode, attrs->ia_size); cifs_truncate_page(inode->i_mapping, inode->i_size); } diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index c3c3e62..1a8be62 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -239,6 +239,7 @@ static void fill_in_inode(struct inode *tmp_inode, int new_buf_type, if (atomic_read(&cifsInfo->inUse) == 0) atomic_set(&cifsInfo->inUse, 1); + cifsInfo->server_eof = end_of_file; spin_lock(&tmp_inode->i_lock); if (is_size_safe_to_change(cifsInfo, end_of_file)) { /* can not safely change the file size here if the @@ -375,6 +376,7 @@ static void unix_fill_in_inode(struct inode *tmp_inode, tmp_inode->i_gid = le64_to_cpu(pfindData->Gid); tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks); + cifsInfo->server_eof = end_of_file; spin_lock(&tmp_inode->i_lock); if (is_size_safe_to_change(cifsInfo, end_of_file)) { /* can not safely change the file size here if the -- cgit v0.10.2 From 2d6d589d8009b37ae03244059c93e0e8cf46910e Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 9 Apr 2009 00:36:44 +0000 Subject: [CIFS] remove some build warnings Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 6926023..01e280c 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2231,6 +2231,7 @@ cleanup_volume_info(struct smb_vol **pvolume_info) return; } +#ifdef CONFIG_CIFS_DFS_UPCALL /* build_path_to_root returns full path to root when * we do not have an exiting connection (tcon) */ static char * @@ -2260,6 +2261,7 @@ build_unc_path_to_root(const struct smb_vol *volume_info, full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */ return full_path; } +#endif int cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, @@ -2272,12 +2274,12 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, struct cifsTconInfo *tcon = NULL; struct TCP_Server_Info *srvTcp = NULL; char *full_path; + char *mount_data = mount_data_global; +#ifdef CONFIG_CIFS_DFS_UPCALL struct dfs_info3_param *referrals = NULL; unsigned int num_referrals = 0; - - char *mount_data = mount_data_global; - try_mount_again: +#endif full_path = NULL; xid = GetXid(); -- cgit v0.10.2 From 5144ebf408ed08380917126493450ee22e63fe3f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 23 Mar 2009 01:47:12 -0400 Subject: cifs: remove dnotify thread code cifs: remove dnotify thread code Al Viro recently removed the dir_notify code from the kernel along with the CIFS code that used it. We can also get rid of the dnotify thread as well. In actuality, it never had anything to do with dir_notify anyway. All it did was unnecessarily wake up all the tasks waiting on the response queues every 15s. Previously that happened to prevent tasks from hanging indefinitely when the server went unresponsive, but we put those to sleep with proper timeouts now so there's no reason to keep this around. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 34f5701..0d6d8b5 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -66,9 +66,6 @@ unsigned int sign_CIFS_PDUs = 1; extern struct task_struct *oplockThread; /* remove sparse warning */ struct task_struct *oplockThread = NULL; /* extern struct task_struct * dnotifyThread; remove sparse warning */ -#ifdef CONFIG_CIFS_EXPERIMENTAL -static struct task_struct *dnotifyThread = NULL; -#endif static const struct super_operations cifs_super_ops; unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE; module_param(CIFSMaxBufSize, int, 0); @@ -1041,34 +1038,6 @@ static int cifs_oplock_thread(void *dummyarg) return 0; } -#ifdef CONFIG_CIFS_EXPERIMENTAL -static int cifs_dnotify_thread(void *dummyarg) -{ - struct list_head *tmp; - struct TCP_Server_Info *server; - - do { - if (try_to_freeze()) - continue; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(15*HZ); - /* check if any stuck requests that need - to be woken up and wakeq so the - thread can wake up and error out */ - read_lock(&cifs_tcp_ses_lock); - list_for_each(tmp, &cifs_tcp_ses_list) { - server = list_entry(tmp, struct TCP_Server_Info, - tcp_ses_list); - if (atomic_read(&server->inFlight)) - wake_up_all(&server->response_q); - } - read_unlock(&cifs_tcp_ses_lock); - } while (!kthread_should_stop()); - - return 0; -} -#endif - static int __init init_cifs(void) { @@ -1145,21 +1114,8 @@ init_cifs(void) goto out_unregister_dfs_key_type; } -#ifdef CONFIG_CIFS_EXPERIMENTAL - dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd"); - if (IS_ERR(dnotifyThread)) { - rc = PTR_ERR(dnotifyThread); - cERROR(1, ("error %d create dnotify thread", rc)); - goto out_stop_oplock_thread; - } -#endif - return 0; -#ifdef CONFIG_CIFS_EXPERIMENTAL - out_stop_oplock_thread: -#endif - kthread_stop(oplockThread); out_unregister_dfs_key_type: #ifdef CONFIG_CIFS_DFS_UPCALL unregister_key_type(&key_type_dns_resolver); @@ -1197,9 +1153,6 @@ exit_cifs(void) cifs_destroy_inodecache(); cifs_destroy_mids(); cifs_destroy_request_bufs(); -#ifdef CONFIG_CIFS_EXPERIMENTAL - kthread_stop(dnotifyThread); -#endif kthread_stop(oplockThread); } -- cgit v0.10.2 From d9fb5c091b419e0495c50c1cce9e4cf9f7105072 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 23 Mar 2009 01:47:11 -0400 Subject: cifs: no need to use rcu_assign_pointer on immutable keys cifs: no need to use rcu_assign_pointer on immutable keys Neither keytype in use by CIFS has an "update" method. This means that the keys are immutable once instantiated. We don't need to use RCU to set the payload data pointers. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index 3fd3a9d..67bf93a 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -41,7 +41,7 @@ cifs_spnego_key_instantiate(struct key *key, const void *data, size_t datalen) /* attach the data */ memcpy(payload, data, datalen); - rcu_assign_pointer(key->payload.data, payload); + key->payload.data = payload; ret = 0; error: diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index 1e0c1bd..df4a306 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -78,7 +78,7 @@ dns_resolver_instantiate(struct key *key, const void *data, } key->type_data.x[0] = datalen; - rcu_assign_pointer(key->payload.data, ip); + key->payload.data = ip; return rc; } -- cgit v0.10.2 From a6ce4932fbdbcd8f8e8c6df76812014351c32892 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 9 Apr 2009 01:14:32 +0000 Subject: [CIFS] Add support for posix open during lookup This patch by utilizing lookup intents, and thus removing a network roundtrip in the open path, improves performance dramatically on open (30% or more) to Samba and other servers which support the cifs posix extensions Signed-off-by: Shirish Pargaonkar Signed-off-by: Steve French diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 7ae1986..df40ab6 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -350,7 +350,7 @@ struct cifsFileInfo { bool invalidHandle:1; /* file closed via session abend */ bool messageMode:1; /* for pipes: message vs byte mode */ atomic_t wrtPending; /* handle in use - defer close */ - struct semaphore fh_sem; /* prevents reopen race after dead ses*/ + struct mutex fh_mutex; /* prevents reopen race after dead ses*/ struct cifs_search_info srch_inf; }; diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index e457e14..d9006b0 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -129,12 +129,64 @@ cifs_bp_rename_retry: return full_path; } +static void +cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle, + struct cifsTconInfo *tcon, bool write_only) +{ + int oplock = 0; + struct cifsFileInfo *pCifsFile; + struct cifsInodeInfo *pCifsInode; + + pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL); + + if (pCifsFile == NULL) + return; + + if (oplockEnabled) + oplock = REQ_OPLOCK; + + pCifsFile->netfid = fileHandle; + pCifsFile->pid = current->tgid; + pCifsFile->pInode = newinode; + pCifsFile->invalidHandle = false; + pCifsFile->closePend = false; + mutex_init(&pCifsFile->fh_mutex); + mutex_init(&pCifsFile->lock_mutex); + INIT_LIST_HEAD(&pCifsFile->llist); + atomic_set(&pCifsFile->wrtPending, 0); + + /* set the following in open now + pCifsFile->pfile = file; */ + write_lock(&GlobalSMBSeslock); + list_add(&pCifsFile->tlist, &tcon->openFileList); + pCifsInode = CIFS_I(newinode); + if (pCifsInode) { + /* if readable file instance put first in list*/ + if (write_only) { + list_add_tail(&pCifsFile->flist, + &pCifsInode->openFileList); + } else { + list_add(&pCifsFile->flist, + &pCifsInode->openFileList); + } + if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) { + pCifsInode->clientCanCacheAll = true; + pCifsInode->clientCanCacheRead = true; + cFYI(1, ("Exclusive Oplock inode %p", + newinode)); + } else if ((oplock & 0xF) == OPLOCK_READ) + pCifsInode->clientCanCacheRead = true; + } + write_unlock(&GlobalSMBSeslock); +} + int cifs_posix_open(char *full_path, struct inode **pinode, struct super_block *sb, int mode, int oflags, int *poplock, __u16 *pnetfid, int xid) { int rc; __u32 oplock; + bool write_only = false; FILE_UNIX_BASIC_INFO *presp_data; __u32 posix_flags = 0; struct cifs_sb_info *cifs_sb = CIFS_SB(sb); @@ -172,6 +224,8 @@ int cifs_posix_open(char *full_path, struct inode **pinode, if (oflags & O_DIRECT) posix_flags |= SMB_O_DIRECT; + if (!(oflags & FMODE_READ)) + write_only = true; rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode, pnetfid, presp_data, &oplock, full_path, @@ -200,6 +254,8 @@ int cifs_posix_open(char *full_path, struct inode **pinode, posix_fill_in_inode(*pinode, presp_data, 1); + cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only); + posix_open_ret: kfree(presp_data); return rc; @@ -241,7 +297,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, char *full_path = NULL; FILE_ALL_INFO *buf = NULL; struct inode *newinode = NULL; - struct cifsInodeInfo *pCifsInode; int disposition = FILE_OVERWRITE_IF; bool write_only = false; @@ -412,44 +467,8 @@ cifs_create_set_dentry: /* mknod case - do not leave file open */ CIFSSMBClose(xid, tcon, fileHandle); } else if (newinode) { - struct cifsFileInfo *pCifsFile = - kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL); - - if (pCifsFile == NULL) - goto cifs_create_out; - pCifsFile->netfid = fileHandle; - pCifsFile->pid = current->tgid; - pCifsFile->pInode = newinode; - pCifsFile->invalidHandle = false; - pCifsFile->closePend = false; - init_MUTEX(&pCifsFile->fh_sem); - mutex_init(&pCifsFile->lock_mutex); - INIT_LIST_HEAD(&pCifsFile->llist); - atomic_set(&pCifsFile->wrtPending, 0); - - /* set the following in open now - pCifsFile->pfile = file; */ - write_lock(&GlobalSMBSeslock); - list_add(&pCifsFile->tlist, &tcon->openFileList); - pCifsInode = CIFS_I(newinode); - if (pCifsInode) { - /* if readable file instance put first in list*/ - if (write_only) { - list_add_tail(&pCifsFile->flist, - &pCifsInode->openFileList); - } else { - list_add(&pCifsFile->flist, - &pCifsInode->openFileList); - } - if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) { - pCifsInode->clientCanCacheAll = true; - pCifsInode->clientCanCacheRead = true; - cFYI(1, ("Exclusive Oplock inode %p", - newinode)); - } else if ((oplock & 0xF) == OPLOCK_READ) - pCifsInode->clientCanCacheRead = true; - } - write_unlock(&GlobalSMBSeslock); + cifs_fill_fileinfo(newinode, fileHandle, + cifs_sb->tcon, write_only); } cifs_create_out: kfree(buf); @@ -582,17 +601,21 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, return rc; } - struct dentry * cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, struct nameidata *nd) { int xid; int rc = 0; /* to get around spurious gcc warning, set to zero here */ + int oplock = 0; + int mode; + __u16 fileHandle = 0; + bool posix_open = false; struct cifs_sb_info *cifs_sb; struct cifsTconInfo *pTcon; struct inode *newInode = NULL; char *full_path = NULL; + struct file *filp; xid = GetXid(); @@ -634,12 +657,27 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, } cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode)); - if (pTcon->unix_ext) - rc = cifs_get_inode_info_unix(&newInode, full_path, - parent_dir_inode->i_sb, xid); - else + if (pTcon->unix_ext) { + if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) && + (nd->flags & LOOKUP_OPEN)) { + if (!((nd->intent.open.flags & O_CREAT) && + (nd->intent.open.flags & O_EXCL))) { + mode = nd->intent.open.create_mode & + ~current->fs->umask; + rc = cifs_posix_open(full_path, &newInode, + parent_dir_inode->i_sb, mode, + nd->intent.open.flags, &oplock, + &fileHandle, xid); + if ((rc != -EINVAL) && (rc != -EOPNOTSUPP)) + posix_open = true; + } + } + if (!posix_open) + rc = cifs_get_inode_info_unix(&newInode, full_path, + parent_dir_inode->i_sb, xid); + } else rc = cifs_get_inode_info(&newInode, full_path, NULL, - parent_dir_inode->i_sb, xid, NULL); + parent_dir_inode->i_sb, xid, NULL); if ((rc == 0) && (newInode != NULL)) { if (pTcon->nocase) @@ -647,7 +685,8 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, else direntry->d_op = &cifs_dentry_ops; d_add(direntry, newInode); - + if (posix_open) + filp = lookup_instantiate_filp(nd, direntry, NULL); /* since paths are not looked up by component - the parent directories are presumed to be good here */ renew_parental_timestamps(direntry); diff --git a/fs/cifs/file.c b/fs/cifs/file.c index dfd3e6c..48c9ae0 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -46,7 +46,7 @@ static inline struct cifsFileInfo *cifs_init_private( memset(private_data, 0, sizeof(struct cifsFileInfo)); private_data->netfid = netfid; private_data->pid = current->tgid; - init_MUTEX(&private_data->fh_sem); + mutex_init(&private_data->fh_mutex); mutex_init(&private_data->lock_mutex); INIT_LIST_HEAD(&private_data->llist); private_data->pfile = file; /* needed for writepage */ @@ -284,35 +284,34 @@ int cifs_open(struct inode *inode, struct file *file) cifs_sb = CIFS_SB(inode->i_sb); tcon = cifs_sb->tcon; - if (file->f_flags & O_CREAT) { - /* search inode for this file and fill in file->private_data */ - pCifsInode = CIFS_I(file->f_path.dentry->d_inode); - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &pCifsInode->openFileList) { - pCifsFile = list_entry(tmp, struct cifsFileInfo, - flist); - if ((pCifsFile->pfile == NULL) && - (pCifsFile->pid == current->tgid)) { - /* mode set in cifs_create */ - - /* needed for writepage */ - pCifsFile->pfile = file; - - file->private_data = pCifsFile; - break; - } - } - read_unlock(&GlobalSMBSeslock); - if (file->private_data != NULL) { - rc = 0; - FreeXid(xid); - return rc; - } else { - if (file->f_flags & O_EXCL) - cERROR(1, ("could not find file instance for " - "new file %p", file)); + /* search inode for this file and fill in file->private_data */ + pCifsInode = CIFS_I(file->f_path.dentry->d_inode); + read_lock(&GlobalSMBSeslock); + list_for_each(tmp, &pCifsInode->openFileList) { + pCifsFile = list_entry(tmp, struct cifsFileInfo, + flist); + if ((pCifsFile->pfile == NULL) && + (pCifsFile->pid == current->tgid)) { + /* mode set in cifs_create */ + + /* needed for writepage */ + pCifsFile->pfile = file; + + file->private_data = pCifsFile; + break; } } + read_unlock(&GlobalSMBSeslock); + + if (file->private_data != NULL) { + rc = 0; + FreeXid(xid); + return rc; + } else { + if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL)) + cERROR(1, ("could not find file instance for " + "new file %p", file)); + } full_path = build_path_from_dentry(file->f_path.dentry); if (full_path == NULL) { @@ -500,9 +499,9 @@ static int cifs_reopen_file(struct file *file, bool can_flush) return -EBADF; xid = GetXid(); - down(&pCifsFile->fh_sem); + mutex_unlock(&pCifsFile->fh_mutex); if (!pCifsFile->invalidHandle) { - up(&pCifsFile->fh_sem); + mutex_lock(&pCifsFile->fh_mutex); FreeXid(xid); return 0; } @@ -533,7 +532,7 @@ static int cifs_reopen_file(struct file *file, bool can_flush) if (full_path == NULL) { rc = -ENOMEM; reopen_error_exit: - up(&pCifsFile->fh_sem); + mutex_lock(&pCifsFile->fh_mutex); FreeXid(xid); return rc; } @@ -575,14 +574,14 @@ reopen_error_exit: cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (rc) { - up(&pCifsFile->fh_sem); + mutex_lock(&pCifsFile->fh_mutex); cFYI(1, ("cifs_open returned 0x%x", rc)); cFYI(1, ("oplock: %d", oplock)); } else { reopen_success: pCifsFile->netfid = netfid; pCifsFile->invalidHandle = false; - up(&pCifsFile->fh_sem); + mutex_lock(&pCifsFile->fh_mutex); pCifsInode = CIFS_I(inode); if (pCifsInode) { if (can_flush) { -- cgit v0.10.2 From bc8cd4390c9129fbd286b10fa99972dfb68cd069 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sun, 12 Apr 2009 18:18:40 +0000 Subject: [CIFS] Fix sparse warnings Signed-off-by: Shirish Pargaonkar CC: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index d9006b0..e937da7 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -149,7 +149,7 @@ cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle, pCifsFile->pid = current->tgid; pCifsFile->pInode = newinode; pCifsFile->invalidHandle = false; - pCifsFile->closePend = false; + pCifsFile->closePend = false; mutex_init(&pCifsFile->fh_mutex); mutex_init(&pCifsFile->lock_mutex); INIT_LIST_HEAD(&pCifsFile->llist); @@ -162,20 +162,18 @@ cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle, pCifsInode = CIFS_I(newinode); if (pCifsInode) { /* if readable file instance put first in list*/ - if (write_only) { + if (write_only) list_add_tail(&pCifsFile->flist, &pCifsInode->openFileList); - } else { - list_add(&pCifsFile->flist, - &pCifsInode->openFileList); - } + else + list_add(&pCifsFile->flist, &pCifsInode->openFileList); + if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) { pCifsInode->clientCanCacheAll = true; pCifsInode->clientCanCacheRead = true; - cFYI(1, ("Exclusive Oplock inode %p", - newinode)); + cFYI(1, ("Exclusive Oplock inode %p", newinode)); } else if ((oplock & 0xF) == OPLOCK_READ) - pCifsInode->clientCanCacheRead = true; + pCifsInode->clientCanCacheRead = true; } write_unlock(&GlobalSMBSeslock); } @@ -668,6 +666,16 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, parent_dir_inode->i_sb, mode, nd->intent.open.flags, &oplock, &fileHandle, xid); + /* + * This code works around a bug in + * samba posix open in samba versions 3.3.1 + * and earlier where create works + * but open fails with invalid parameter. + * If either of these error codes are + * returned, follow the normal lookup. + * Otherwise, the error during posix open + * is handled. + */ if ((rc != -EINVAL) && (rc != -EOPNOTSUPP)) posix_open = true; } diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 48c9ae0..50ca088 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -307,11 +307,9 @@ int cifs_open(struct inode *inode, struct file *file) rc = 0; FreeXid(xid); return rc; - } else { - if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL)) + } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL)) cERROR(1, ("could not find file instance for " "new file %p", file)); - } full_path = build_path_from_dentry(file->f_path.dentry); if (full_path == NULL) { -- cgit v0.10.2 From 88dd47fff4891545bfcfdf39146dde8380771766 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 15 Apr 2009 03:09:39 +0000 Subject: [CIFS] Fix build break caused by change to new current_umask helper function Signed-off-by: Steve French diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index e937da7..461750e 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -661,7 +661,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, if (!((nd->intent.open.flags & O_CREAT) && (nd->intent.open.flags & O_EXCL))) { mode = nd->intent.open.create_mode & - ~current->fs->umask; + ~current_umask(); rc = cifs_posix_open(full_path, &newInode, parent_dir_inode->i_sb, mode, nd->intent.open.flags, &oplock, -- cgit v0.10.2 From 27b87fe52baba0a55e9723030e76fce94fabcea4 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 14 Apr 2009 11:00:53 -0400 Subject: cifs: fix unicode string area word alignment in session setup The handling of unicode string area alignment is wrong. decode_unicode_ssetup improperly assumes that it will always be preceded by a pad byte. This isn't the case if the string area is already word-aligned. This problem, combined with the bad buffer sizing for the serverDomain string can cause memory corruption. The bad alignment can make it so that the alignment of the characters is off. This can make them translate to characters that are greater than 2 bytes each. If this happens we can overflow the allocation. Fix this by fixing the alignment in CIFS_SessSetup instead so we can verify it against the head of the response. Also, clean up the workaround for improperly terminated strings by checking for a odd-length unicode buffers and then forcibly terminating them. Finally, resize the buffer for serverDomain. Now that we've fixed the alignment, it's probably fine, but a malicious server could overflow it. A better solution for handling these strings is still needed, but this should be a suitable bandaid. Signed-off-by: Jeff Layton CC: Stable Signed-off-by: Steve French diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 5c68b42..70d04d0 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -285,27 +285,26 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft, int words_left, len; char *data = *pbcc_area; - - cFYI(1, ("bleft %d", bleft)); - - /* SMB header is unaligned, so cifs servers word align start of - Unicode strings */ - data++; - bleft--; /* Windows servers do not always double null terminate - their final Unicode string - in which case we - now will not attempt to decode the byte of junk - which follows it */ + /* + * Windows servers do not always double null terminate their final + * Unicode string. Check to see if there are an uneven number of bytes + * left. If so, then add an extra NULL pad byte to the end of the + * response. + * + * See section 2.7.2 in "Implementing CIFS" for details + */ + if (bleft % 2) { + data[bleft] = 0; + ++bleft; + } words_left = bleft / 2; /* save off server operating system */ len = UniStrnlen((wchar_t *) data, words_left); -/* We look for obvious messed up bcc or strings in response so we do not go off - the end since (at least) WIN2K and Windows XP have a major bug in not null - terminating last Unicode string in response */ if (len >= words_left) return rc; @@ -343,13 +342,10 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft, return rc; kfree(ses->serverDomain); - ses->serverDomain = kzalloc(2 * (len + 1), GFP_KERNEL); /* BB FIXME wrong length */ - if (ses->serverDomain != NULL) { + ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL); + if (ses->serverDomain != NULL) cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len, nls_cp); - ses->serverDomain[2*len] = 0; - ses->serverDomain[(2*len) + 1] = 0; - } data += 2 * (len + 1); words_left -= len + 1; @@ -702,12 +698,18 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time, } /* BB check if Unicode and decode strings */ - if (smb_buf->Flags2 & SMBFLG2_UNICODE) + if (smb_buf->Flags2 & SMBFLG2_UNICODE) { + /* unicode string area must be word-aligned */ + if (((unsigned long) bcc_ptr - (unsigned long) smb_buf) % 2) { + ++bcc_ptr; + --bytes_remaining; + } rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining, - ses, nls_cp); - else + ses, nls_cp); + } else { rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining, ses, nls_cp); + } ssetup_exit: if (spnego_key) { -- cgit v0.10.2 From f083def68f84b04fe3f97312498911afce79609e Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 16 Apr 2009 11:21:52 -0400 Subject: cifs: fix buffer size for tcon->nativeFileSystem field The buffer for this was resized recently to fix a bug. It's still possible however that a malicious server could overflow this field by sending characters in it that are >2 bytes in the local charset. Double the size of the buffer to account for this possibility. Also get rid of some really strange and seemingly pointless NULL termination. It's NULL terminating the string in the source buffer, but by the time that happens, we've already copied the string. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 01e280c..1a93604 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3756,16 +3756,13 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, BCC(smb_buffer_response)) { kfree(tcon->nativeFileSystem); tcon->nativeFileSystem = - kzalloc(2*(length + 1), GFP_KERNEL); + kzalloc((4 * length) + 2, GFP_KERNEL); if (tcon->nativeFileSystem) cifs_strfromUCS_le( tcon->nativeFileSystem, (__le16 *) bcc_ptr, length, nls_codepage); - bcc_ptr += 2 * length; - bcc_ptr[0] = 0; /* null terminate the string */ - bcc_ptr[1] = 0; - bcc_ptr += 2; + bcc_ptr += (2 * length) + 2; } /* else do not bother copying these information fields*/ } else { -- cgit v0.10.2 From 313fecfa69bbad0a10d3313a50a89d3064f47ce1 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 16 Apr 2009 11:21:53 -0400 Subject: cifs: add cFYI messages with some of the saved strings from ssetup/tcon ...to make it easier to find problems in this area in the future. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 1a93604..4a04ecd 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3757,11 +3757,14 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, kfree(tcon->nativeFileSystem); tcon->nativeFileSystem = kzalloc((4 * length) + 2, GFP_KERNEL); - if (tcon->nativeFileSystem) + if (tcon->nativeFileSystem) { cifs_strfromUCS_le( tcon->nativeFileSystem, (__le16 *) bcc_ptr, length, nls_codepage); + cFYI(1, ("nativeFileSystem=%s", + tcon->nativeFileSystem)); + } bcc_ptr += (2 * length) + 2; } /* else do not bother copying these information fields*/ diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 70d04d0..c652c73 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -311,8 +311,10 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft, kfree(ses->serverOS); /* UTF-8 string will not grow more than four times as big as UCS-16 */ ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL); - if (ses->serverOS != NULL) + if (ses->serverOS != NULL) { cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp); + cFYI(1, ("serverOS=%s", ses->serverOS)); + } data += 2 * (len + 1); words_left -= len + 1; @@ -327,6 +329,7 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft, if (ses->serverNOS != NULL) { cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len, nls_cp); + cFYI(1, ("serverNOS=%s", ses->serverNOS)); if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) { cFYI(1, ("NT4 server")); ses->flags |= CIFS_SES_NT4; @@ -343,9 +346,11 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft, kfree(ses->serverDomain); ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL); - if (ses->serverDomain != NULL) + if (ses->serverDomain != NULL) { cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len, nls_cp); + cFYI(1, ("serverDomain=%s", ses->serverDomain)); + } data += 2 * (len + 1); words_left -= len + 1; -- cgit v0.10.2 From 22c9d52bc03b880045ab1081890a38f11b272ae7 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 16 Apr 2009 13:48:49 -0400 Subject: cifs: remove unneeded bcc_ptr update in CIFSTCon This pointer isn't used again after this point. It's also not updated in the ascii case, so there's no need to update it here. Pointed-out-by: Dave Kleikamp Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 4a04ecd..bacdef1 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3765,7 +3765,6 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, cFYI(1, ("nativeFileSystem=%s", tcon->nativeFileSystem)); } - bcc_ptr += (2 * length) + 2; } /* else do not bother copying these information fields*/ } else { -- cgit v0.10.2 From 78a49990269a539fc77e9a669d9e74e1dfaec657 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Fri, 17 Apr 2009 10:46:25 +0900 Subject: m32r: move include/asm-m32r/* to arch/m32r/include/asm/ Move remained files, ftrace.h and swab.h, to arch/m32r/include/asm/. Signed-off-by: Hirokazu Takata diff --git a/arch/m32r/include/asm/ftrace.h b/arch/m32r/include/asm/ftrace.h new file mode 100644 index 0000000..40a8c17 --- /dev/null +++ b/arch/m32r/include/asm/ftrace.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/m32r/include/asm/swab.h b/arch/m32r/include/asm/swab.h new file mode 100644 index 0000000..54dab00 --- /dev/null +++ b/arch/m32r/include/asm/swab.h @@ -0,0 +1,10 @@ +#ifndef _ASM_M32R_SWAB_H +#define _ASM_M32R_SWAB_H + +#include + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __SWAB_64_THRU_32__ +#endif + +#endif /* _ASM_M32R_SWAB_H */ diff --git a/include/asm-m32r/ftrace.h b/include/asm-m32r/ftrace.h deleted file mode 100644 index 40a8c17..0000000 --- a/include/asm-m32r/ftrace.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-m32r/swab.h b/include/asm-m32r/swab.h deleted file mode 100644 index 54dab00..0000000 --- a/include/asm-m32r/swab.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_M32R_SWAB_H -#define _ASM_M32R_SWAB_H - -#include - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#endif /* _ASM_M32R_SWAB_H */ -- cgit v0.10.2 From a86043c2ad92aa6312807039198d6ab6171164ef Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 16 Apr 2009 16:59:28 +0000 Subject: e1000e: fix bug in restart queue logic If the e1000e transmit cleanup inner loop exited early, then cleaned might not be true. This could cause tx hangs or other badness. Use count to track the total number of descriptors cleaned instead of basing a tx queue restart off of a temporary working state variable. This code now makes the flow the same for e1000/e1000e/igb/ixgbe Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 1693ed1..ca82f19 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -621,7 +621,6 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - bool cleaned = false; unsigned int total_tx_bytes = 0, total_tx_packets = 0; i = tx_ring->next_to_clean; @@ -630,7 +629,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { - for (cleaned = 0; !cleaned; count++) { + bool cleaned = false; + for (; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); @@ -661,8 +661,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) tx_ring->next_to_clean = i; #define TX_WAKE_THRESHOLD 32 - if (cleaned && netif_carrier_ok(netdev) && - e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) { + if (count && netif_carrier_ok(netdev) && + e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) { /* Make sure that anybody stopping the queue after this * sees the new next_to_clean. */ -- cgit v0.10.2 From 843f42678f6c47a2c8d1648e584cb57ebff3750f Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 16 Apr 2009 16:59:47 +0000 Subject: e1000: fix transmit routine exit bug If the e1000 transmit cleanup inner loop exited early, then cleaned might not be true. This could cause tx hangs or other badness. Use count to track the total number of descriptors cleaned instead of basing a tx queue restart off of a temporary working state variable. This code now makes the flow the same for e1000/e1000e/igb/ixgbe Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ef12931..6a46cee 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3834,7 +3834,6 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - bool cleaned = false; unsigned int total_tx_bytes=0, total_tx_packets=0; i = tx_ring->next_to_clean; @@ -3843,7 +3842,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { - for (cleaned = false; !cleaned; count++) { + bool cleaned = false; + for ( ; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); @@ -3871,7 +3871,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, tx_ring->next_to_clean = i; #define TX_WAKE_THRESHOLD 32 - if (unlikely(cleaned && netif_carrier_ok(netdev) && + if (unlikely(count && netif_carrier_ok(netdev) && E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) { /* Make sure that anybody stopping the queue after this * sees the new next_to_clean. -- cgit v0.10.2 From f92ef202988ffb07bb86cf94d0b09f2a61192da7 Mon Sep 17 00:00:00 2001 From: PJ Waskiewicz Date: Thu, 16 Apr 2009 15:00:20 +0000 Subject: ixgbe: Fix DCB traffic class mapping for 82599 The traffic classes in hardware are not symmetrical for Rx and Tx. Rx is every 16 descriptor queues, Tx is not. It runs 32-32-16-16-8-8-8 when running with 8 traffic classes, and runs 64-32-16 when running with 4 traffic classes. This patch fixes the mapping. Signed-off-by: Peter P Waskiewicz Jr Cc: stable@kernel.org Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 49a9037..0188425 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2841,11 +2841,55 @@ static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter) } ret = true; } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { - for (i = 0; i < dcb_i; i++) { - adapter->rx_ring[i].reg_idx = i << 4; - adapter->tx_ring[i].reg_idx = i << 4; + if (dcb_i == 8) { + /* + * Tx TC0 starts at: descriptor queue 0 + * Tx TC1 starts at: descriptor queue 32 + * Tx TC2 starts at: descriptor queue 64 + * Tx TC3 starts at: descriptor queue 80 + * Tx TC4 starts at: descriptor queue 96 + * Tx TC5 starts at: descriptor queue 104 + * Tx TC6 starts at: descriptor queue 112 + * Tx TC7 starts at: descriptor queue 120 + * + * Rx TC0-TC7 are offset by 16 queues each + */ + for (i = 0; i < 3; i++) { + adapter->tx_ring[i].reg_idx = i << 5; + adapter->rx_ring[i].reg_idx = i << 4; + } + for ( ; i < 5; i++) { + adapter->tx_ring[i].reg_idx = + ((i + 2) << 4); + adapter->rx_ring[i].reg_idx = i << 4; + } + for ( ; i < dcb_i; i++) { + adapter->tx_ring[i].reg_idx = + ((i + 8) << 3); + adapter->rx_ring[i].reg_idx = i << 4; + } + + ret = true; + } else if (dcb_i == 4) { + /* + * Tx TC0 starts at: descriptor queue 0 + * Tx TC1 starts at: descriptor queue 64 + * Tx TC2 starts at: descriptor queue 96 + * Tx TC3 starts at: descriptor queue 112 + * + * Rx TC0-TC3 are offset by 32 queues each + */ + adapter->tx_ring[0].reg_idx = 0; + adapter->tx_ring[1].reg_idx = 64; + adapter->tx_ring[2].reg_idx = 96; + adapter->tx_ring[3].reg_idx = 112; + for (i = 0 ; i < dcb_i; i++) + adapter->rx_ring[i].reg_idx = i << 5; + + ret = true; + } else { + ret = false; } - ret = true; } else { ret = false; } -- cgit v0.10.2 From 2f3889f42ec7c2b0c3049ecdd8e4687b6930779a Mon Sep 17 00:00:00 2001 From: PJ Waskiewicz Date: Thu, 16 Apr 2009 15:00:41 +0000 Subject: ixgbe: Fix the DCB PFC thresholds for 82599 The thresholds for the DCB priority flow control are incorrect for 82599. This fixes the thresholds to be correct. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c index 470b676..f4417fc 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82599.c +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c @@ -290,7 +290,7 @@ s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw, s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, struct ixgbe_dcb_config *dcb_config) { - u32 i, reg; + u32 i, reg, rx_pba_size; /* If PFC is disabled globally then fall back to LFC. */ if (!dcb_config->pfc_mode_enable) { @@ -301,17 +301,23 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, /* Configure PFC Tx thresholds per TC */ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { - /* Config and remember Tx */ + if (dcb_config->rx_pba_cfg == pba_equal) + rx_pba_size = IXGBE_RXPBSIZE_64KB; + else + rx_pba_size = (i < 4) ? IXGBE_RXPBSIZE_80KB + : IXGBE_RXPBSIZE_48KB; + + reg = ((rx_pba_size >> 5) & 0xFFE0); if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full || - dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) { - reg = hw->fc.high_water | IXGBE_FCRTH_FCEN; - IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg); - reg = hw->fc.low_water | IXGBE_FCRTL_XONE; - IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg); - } else { - IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0); - } + dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) + reg |= IXGBE_FCRTL_XONE; + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg); + + reg = ((rx_pba_size >> 2) & 0xFFE0); + if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full || + dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) + reg |= IXGBE_FCRTH_FCEN; + IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg); } /* Configure pause time (2 TCs per register) */ -- cgit v0.10.2 From ee33c58541bae92669fe64a39f695ab533d0de14 Mon Sep 17 00:00:00 2001 From: Erik Waling Date: Wed, 15 Apr 2009 23:32:10 +0000 Subject: macb: Handle Retry Limit Exceeded errors When transfering large amounts of data we sometimes experienced that the Retry Limit Exceeded (RLE) bit got set in TSR during transmission attempts. When this happened the driver would stall in a state that prevented any more data from being sent. Signed-off-by: Erik Waling Signed-off-by: Haavard Skinnemoen Signed-off-by: David S. Miller diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 46073de..9fcc717 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -316,10 +316,11 @@ static void macb_tx(struct macb *bp) dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n", (unsigned long)status); - if (status & MACB_BIT(UND)) { + if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) { int i; - printk(KERN_ERR "%s: TX underrun, resetting buffers\n", - bp->dev->name); + printk(KERN_ERR "%s: TX %s, resetting buffers\n", + bp->dev->name, status & MACB_BIT(UND) ? + "underrun" : "retry limit exceeded"); /* Transfer ongoing, disable transmitter, to avoid confusion */ if (status & MACB_BIT(TGO)) @@ -590,7 +591,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) } } - if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND))) + if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND) | + MACB_BIT(ISR_RLE))) macb_tx(bp); /* -- cgit v0.10.2 From f72f550c5885419ee1b32f47213087e6640e766b Mon Sep 17 00:00:00 2001 From: Erik Waling Date: Wed, 15 Apr 2009 23:32:11 +0000 Subject: macb: process the RX ring regardless of interrupt status Suppose that we receive lots of frames, start processing them, but exhaust our budget so that we return before we had a chance to look at all of them. Then, when the network layer calls us again, we will only continue processing the buffers if the REC bit was set in the mean time, which it might not be if there was a brief pause in the flow of packets. If this happens, we'll simply display a warning and call netif_rx_complete() with potentially lots of unprocessed packets in the RX ring... Fix this by scanning the ring no matter what flags are set in the interrupt status register. Signed-off-by: Erik Waling Signed-off-by: Haavard Skinnemoen Signed-off-by: David S. Miller diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 9fcc717..e82aee4 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -521,27 +521,10 @@ static int macb_poll(struct napi_struct *napi, int budget) macb_writel(bp, RSR, status); work_done = 0; - if (!status) { - /* - * This may happen if an interrupt was pending before - * this function was called last time, and no packets - * have been received since. - */ - napi_complete(napi); - goto out; - } dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n", (unsigned long)status, budget); - if (!(status & MACB_BIT(REC))) { - dev_warn(&bp->pdev->dev, - "No RX buffers complete, status = %02lx\n", - (unsigned long)status); - napi_complete(napi); - goto out; - } - work_done = macb_rx(bp, budget); if (work_done < budget) napi_complete(napi); @@ -550,7 +533,6 @@ static int macb_poll(struct napi_struct *napi, int budget) * We've done what we can to clean the buffers. Make sure we * get notified when new packets arrive. */ -out: macb_writel(bp, IER, MACB_RX_INT_FLAGS); /* TODO: Handle errors */ -- cgit v0.10.2 From 62bcaa13039538c7f794b0cfcbc26e0313e7fcd5 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Fri, 17 Apr 2009 01:38:46 -0700 Subject: can: Network Drop Monitor: Make use of consume_skb() in af_can.c Since commit ead2ceb0ec9f85cff19c43b5cdb2f8a054484431 ("Network Drop Monitor: Adding kfree_skb_clean for non-drops and modifying end-of-line points for skbs") so called end-of-line points for skb's should use consume_skb() to free the socket buffer. In opposite to consume_skb() the function kfree_skb() is intended to be used for unexpected skb drops e.g. in error conditions that now can trigger the network drop monitor if enabled. This patch moves the skb end-of-line point in af_can.c to use consume_skb(). Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller diff --git a/net/can/af_can.c b/net/can/af_can.c index 547bafc..10f0528 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -674,8 +674,8 @@ static int can_rcv(struct sk_buff *skb, struct net_device *dev, rcu_read_unlock(); - /* free the skbuff allocated by the netdevice driver */ - kfree_skb(skb); + /* consume the skbuff allocated by the netdevice driver */ + consume_skb(skb); if (matches > 0) { can_stats.matches++; -- cgit v0.10.2 From 9dd014eb9804f19d6230c3cbc10fa25f5416bda7 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 17 Apr 2009 01:40:19 -0700 Subject: pegasus: Handle disconnect error code correctly. EPERM means that disconnect() is runnung. It should be treated like ENODEV Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index a8228d8..2138535 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -899,6 +899,7 @@ static int pegasus_start_xmit(struct sk_buff *skb, struct net_device *net) /* cleanup should already have been scheduled */ break; case -ENODEV: /* disconnect() upcoming */ + case -EPERM: netif_device_detach(pegasus->net); break; default: -- cgit v0.10.2 From a0a69a0106dab8d20596f97f6674bed3b394d1ee Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 17 Apr 2009 02:34:38 -0700 Subject: gro: Fix use after free in tcp_gro_receive After calling skb_gro_receive skb->len can no longer be relied on since if the skb was merged using frags, then its pages will have been removed and the length reduced. This caused tcp_gro_receive to prematurely end merging which resulted in suboptimal performance with ixgbe. The fix is to store skb->len on the stack. Reported-by: Mark Wagner Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index fafbec8..1d7f49c 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2511,6 +2511,7 @@ struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb) struct sk_buff *p; struct tcphdr *th; struct tcphdr *th2; + unsigned int len; unsigned int thlen; unsigned int flags; unsigned int mss = 1; @@ -2531,6 +2532,7 @@ struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb) skb_gro_pull(skb, thlen); + len = skb_gro_len(skb); flags = tcp_flag_word(th); for (; (p = *head); head = &p->next) { @@ -2561,7 +2563,7 @@ found: mss = skb_shinfo(p)->gso_size; - flush |= (skb_gro_len(skb) > mss) | !skb_gro_len(skb); + flush |= (len > mss) | !len; flush |= (ntohl(th2->seq) + skb_gro_len(p)) ^ ntohl(th->seq); if (flush || skb_gro_receive(head, skb)) { @@ -2574,7 +2576,7 @@ found: tcp_flag_word(th2) |= flags & (TCP_FLAG_FIN | TCP_FLAG_PSH); out_check_final: - flush = skb_gro_len(skb) < mss; + flush = len < mss; flush |= flags & (TCP_FLAG_URG | TCP_FLAG_PSH | TCP_FLAG_RST | TCP_FLAG_SYN | TCP_FLAG_FIN); -- cgit v0.10.2 From 243b706d8a71364ad6080328d45b73516c8af5f3 Mon Sep 17 00:00:00 2001 From: Christophe Borivant Date: Fri, 17 Apr 2009 11:39:39 +0200 Subject: HID: Add support for the G25 force feedback wheel in native mode Add Product Id 0xc299 for the Logitech G25 force feedback wheel The Logitech G25 force feedback wheel, is first recognize by the kernel with the product id "0xc294". In this mode, we can't use all the axes and buttons of the wheel. Using a userland utility, it is possible to make the wheel switch to native mode -- http://svn.vdrift.net/viewvc.cgi/trunk/tools/G25manage/?root=VDrift In native mode, the wheel change its id number to "0xc299". The packet that needs to be sent to the wheel to swtich to native mode and change its PID is { 0xf8, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00 } Signed-off-by: Christophe Borivant Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5746a59..c7075d2 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1293,6 +1293,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index bdeda4c..aa1b995 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -292,6 +292,7 @@ #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286 #define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294 #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295 +#define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299 #define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a #define USB_DEVICE_ID_S510_RECEIVER 0xc50c #define USB_DEVICE_ID_S510_RECEIVER_2 0xc517 diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index 7b80cb6..7afbaa0 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -297,6 +297,8 @@ static const struct hid_device_id lg_devices[] = { .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2), .driver_data = LG_FF }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL), + .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2), .driver_data = LG_FF2 }, { } -- cgit v0.10.2 From 5a47fa3d30b5d1977b4e7d1daf5ba5b577258ce1 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 16 Apr 2009 23:54:04 +0200 Subject: ALSA: emu10k1 - off by 1 in snd_emu10k1_wait() With `while (count++ < 16384)' count reaches 16385. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c index 4bfc31d..c1a5aa1 100644 --- a/sound/pci/emu10k1/io.c +++ b/sound/pci/emu10k1/io.c @@ -490,7 +490,7 @@ void snd_emu10k1_wait(struct snd_emu10k1 *emu, unsigned int wait) if (newtime != curtime) break; } - if (count >= 16384) + if (count > 16384) break; curtime = newtime; } -- cgit v0.10.2 From 3126a1790e897252868941bd29a3dd526b506804 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 15 Apr 2009 23:38:45 -0700 Subject: ALSA: MAINTAINERS - Update SOUND Signed-off-by: Joe Perches Signed-off-by: Takashi Iwai diff --git a/MAINTAINERS b/MAINTAINERS index 0cb20d8..c7ba935 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5187,7 +5187,12 @@ M: perex@perex.cz P: Takashi Iwai M: tiwai@suse.de L: alsa-devel@alsa-project.org (subscribers-only) +W: http://www.alsa-project.org/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git +T: git git://git.alsa-project.org/alsa-kernel.git S: Maintained +F: Documentation/sound/ +F: include/sound/ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) -- cgit v0.10.2 From 60c8a774fb7971cec4a72fd5d002f39668826808 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Apr 2009 03:59:42 -0700 Subject: sparc64: Update defconfig. Signed-off-by: David S. Miller diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index ade4994..b5d63bd 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 -# Fri Jan 2 18:14:26 2009 +# Linux kernel version: 2.6.30-rc2 +# Fri Apr 17 02:03:07 2009 # +CONFIG_64BIT=y CONFIG_SPARC=y +# CONFIG_SPARC32 is not set CONFIG_SPARC64=y CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig" CONFIG_BITS=64 -CONFIG_64BIT=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -22,6 +23,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_MMU=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,17 +38,27 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y @@ -55,24 +67,28 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -82,6 +98,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -91,15 +108,16 @@ CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -107,10 +125,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -127,11 +143,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -185,11 +196,12 @@ CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set @@ -210,6 +222,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC64_PCI=y @@ -229,8 +243,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -292,25 +304,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y - -# -# DCCP CCIDs Configuration (EXPERIMENTAL) -# -CONFIG_IP_DCCP_CCID2=m -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# CONFIG_NET_DCCPPROBE is not set +# CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set @@ -326,6 +320,7 @@ CONFIG_VLAN_8021Q=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -334,18 +329,19 @@ CONFIG_VLAN_8021Q=m # CONFIG_NET_PKTGEN=m CONFIG_NET_TCPPROBE=m +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -389,19 +385,27 @@ CONFIG_SUNVDC=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set @@ -439,6 +443,7 @@ CONFIG_BLK_DEV_ALI15X3=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -506,8 +511,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -528,6 +535,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SUNESP is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -536,7 +544,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m -# CONFIG_MD_RAID5_RESHAPE is not set +CONFIG_MD_RAID6_PQ=m CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -561,6 +569,7 @@ CONFIG_DM_ZERO=m # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -589,14 +598,16 @@ CONFIG_PHYLIB=m # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m -# CONFIG_SUNLANCE is not set -# CONFIG_HAPPYMEAL is not set +CONFIG_SUNLANCE=m +CONFIG_HAPPYMEAL=m # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set -# CONFIG_SUNGEM is not set -CONFIG_CASSINI=m +CONFIG_SUNGEM=m +# CONFIG_CASSINI is not set CONFIG_SUNVNET=m # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -631,9 +642,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000E is not set +CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -648,6 +660,7 @@ CONFIG_BNX2=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -657,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set CONFIG_NIU=m @@ -666,6 +680,7 @@ CONFIG_NIU=m # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -673,7 +688,10 @@ CONFIG_NIU=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -738,7 +756,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -805,6 +822,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_N2RNG=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -867,12 +885,9 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -897,12 +912,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -917,10 +934,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -957,10 +978,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -1053,6 +1076,7 @@ CONFIG_FB_ATY_GX=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1141,6 +1165,8 @@ CONFIG_SND_ALI5451=m # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1197,28 +1223,31 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1247,6 +1276,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1268,18 +1298,17 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1315,7 +1344,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1327,6 +1355,11 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1390,6 +1423,7 @@ CONFIG_RTC_DRV_BQ4802=y CONFIG_RTC_DRV_SUN4V=y CONFIG_RTC_DRV_STARFIRE=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1412,6 +1446,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -1426,6 +1461,7 @@ CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1435,6 +1471,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1460,10 +1501,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -1473,6 +1511,7 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1481,6 +1520,7 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -1555,6 +1595,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1590,10 +1633,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1602,18 +1647,21 @@ CONFIG_TRACING=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_DCFLUSH is not set # CONFIG_STACK_DEBUG is not set -# CONFIG_DEBUG_PAGEALLOC is not set # # Security options @@ -1642,10 +1690,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=m @@ -1715,6 +1765,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1723,11 +1774,13 @@ CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set @@ -1737,8 +1790,11 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y -- cgit v0.10.2 From a40ac3414eb4122345efd071f787a349a30fccf7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Apr 2009 04:05:06 -0700 Subject: sparc32: Update defconfig. Signed-off-by: David S. Miller diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig index 09ab46e..8bcd27a 100644 --- a/arch/sparc/configs/sparc32_defconfig +++ b/arch/sparc/configs/sparc32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 -# Thu Jan 8 16:45:44 2009 +# Linux kernel version: 2.6.30-rc2 +# Fri Apr 17 04:04:46 2009 # # CONFIG_64BIT is not set CONFIG_SPARC=y @@ -30,17 +30,27 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -49,24 +59,28 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -75,12 +89,15 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -93,7 +110,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -109,11 +125,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -144,6 +155,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_SUN_PM=y # CONFIG_SPARC_LED is not set CONFIG_SERIAL_CONSOLE=y @@ -159,6 +172,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC32_PCI=y @@ -175,8 +189,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -251,6 +263,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -263,7 +276,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -313,12 +325,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -375,8 +391,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -398,6 +416,7 @@ CONFIG_SCSI_QLOGICPTI=m CONFIG_SCSI_SUNESP=y # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -413,6 +432,7 @@ CONFIG_SCSI_SUNESP=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -430,6 +450,8 @@ CONFIG_SUNQE=m # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -448,6 +470,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -462,6 +485,7 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -471,6 +495,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -480,6 +505,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -487,7 +513,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -537,7 +562,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -597,6 +621,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -688,7 +713,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -700,7 +724,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -750,6 +774,7 @@ CONFIG_RTC_DRV_M48T59=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -777,6 +802,7 @@ CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -786,6 +812,11 @@ CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -820,14 +851,20 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -838,7 +875,6 @@ CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -911,6 +947,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -939,15 +978,7 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y @@ -979,10 +1010,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1059,6 +1093,7 @@ CONFIG_CRYPTO_DEFLATE=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1074,7 +1109,10 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From ec5cfbfc05b180a026b4ebce72f341ee196de262 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:36:43 +0100 Subject: [ARM] S3C24XX: Fix sparse error in gpiolib.c Fix the following sparse error generated by including instead of gpiolib.c:78:22: warning: symbol 's3c24xx_gpios' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 94a341a..5c0491b 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include -- cgit v0.10.2 From ad14ff37496baa4bee98ea99db8bb8615c648b49 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:36:44 +0100 Subject: [ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon' Fix the following sparse warning due to s3c_device_hwmon being missing from devs.c:380:24: warning: symbol 's3c_device_hwmon' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 6b1b523..26f0cec 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -34,6 +34,7 @@ extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; extern struct platform_device s3c_device_hsmmc2; -- cgit v0.10.2 From 59c1ab60909ffacbf978ac72e4bb1d40d79f1465 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:36:45 +0100 Subject: [ARM] JIVE: Fix sparse warnings about items which should be static Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as they are not exported, and are generating the following sparse warnings: mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static? mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index d324f089..8f0d37d 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -277,7 +277,7 @@ __setup("mtdset=", jive_mtdset); #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN) #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN) -struct s3c2410fb_display jive_vgg2432a4_display[] = { +static struct s3c2410fb_display jive_vgg2432a4_display[] = { [0] = { .width = LCD_XRES, .height = LCD_YRES, @@ -310,7 +310,7 @@ struct s3c2410fb_display jive_vgg2432a4_display[] = { #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) -struct s3c2410fb_mach_info jive_lcd_config = { +static struct s3c2410fb_mach_info jive_lcd_config = { .displays = jive_vgg2432a4_display, .num_displays = ARRAY_SIZE(jive_vgg2432a4_display), .default_display = 0, -- cgit v0.10.2 From 019dbaa11db56d8e5d868e02421ff236a054c0d8 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:36:46 +0100 Subject: [ARM] Anubis: Fix sparse warnings for items that should be static Make 'anubis_ide_platdata' statis as it is not used outside the file it is in, fixing the following sparse warning: mach-anubis.c:246:27: warning: symbol 'anubis_ide_platdata' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index b05d56e..9c6abf9 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -243,7 +243,7 @@ static struct s3c2410_platform_nand anubis_nand_info = { /* IDE channels */ -struct pata_platform_info anubis_ide_platdata = { +static struct pata_platform_info anubis_ide_platdata = { .ioport_shift = 5, }; -- cgit v0.10.2 From 2a96ad05e93be75398871a2fce932ed234d03112 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:36:47 +0100 Subject: [ARM] Osiris: Fix double initialisation in machine block The .init_machine entry in mach-osiris.c had the same entry twice, so remove one definition to fix the following warning from sparse: mach-osiris.c:416:3: warning: Initializer entry defined twice mach-osiris.c:418:3: also defined here Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 41a00f5..c8a4668 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -413,7 +413,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = osiris_map_io, - .init_machine = osiris_init, .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, -- cgit v0.10.2 From f8c8ac8109ecdd3583b0ac9fd3adf058678a802e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:36:49 +0100 Subject: [ARM] S3C: Fix ADC driver sparse warning The symbol 's3c_adc_try' in arch/arm/plat-s3c24xx/adc.c does not need to be exported and thus should be static. This fixes the following sparse warning: adc.c:103:6: warning: symbol 's3c_adc_try' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 9a5c767..bc6f6a1 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -100,7 +100,7 @@ static void s3c_adc_dbgshow(struct adc_device *adc) readl(adc->regs + S3C2410_ADCDLY)); } -void s3c_adc_try(struct adc_device *adc) +static void s3c_adc_try(struct adc_device *adc) { struct s3c_adc_client *next = adc->ts_pend; -- cgit v0.10.2 From 0c3ee078251b85812e585b5cf5d1635afd73f4e2 Mon Sep 17 00:00:00 2001 From: Ramax Lo Date: Tue, 14 Apr 2009 23:56:18 +0800 Subject: [ARM] S3C24XX: ADC: Check pending queue before freeing adc client Check pending queue and remove the adc client being released. Signed-off-by: Ramax Lo Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index bc6f6a1..91adfa7 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -190,6 +190,23 @@ EXPORT_SYMBOL_GPL(s3c_adc_register); void s3c_adc_release(struct s3c_adc_client *client) { /* We should really check that nothing is in progress. */ + if (adc_dev->cur == client) + adc_dev->cur = NULL; + if (adc_dev->ts_pend == client) + adc_dev->ts_pend = NULL; + else { + struct list_head *p, *n; + struct s3c_adc_client *tmp; + + list_for_each_safe(p, n, &adc_pending) { + tmp = list_entry(p, struct s3c_adc_client, pend); + if (tmp == client) + list_del(&tmp->pend); + } + } + + if (adc_dev->cur == NULL) + s3c_adc_try(adc_dev); kfree(client); } EXPORT_SYMBOL_GPL(s3c_adc_release); -- cgit v0.10.2 From f600f6c4824d7e40be370f7e26ab0fbc3f6f911c Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Thu, 16 Apr 2009 19:35:01 +0200 Subject: ALSA: us122l: Fix signedness in comparisions Within 2.6.30's mergewindow, struct urb's transfer_buffer_length has become unsigned. This changed an "int > int" comparision to an "unsigned > int" one in snd_usb_122l. Fix this by using a local int variable instead of urb->transfer_buffer_length in comparisions. Shorten playback_prep_freqn() a bit and tweak error-paths in usb_stream_prepare_playback(). Signed-off-by: Karsten Wiese Signed-off-by: Takashi Iwai diff --git a/sound/usb/usx2y/usb_stream.c b/sound/usb/usx2y/usb_stream.c index 24393da..12ae034 100644 --- a/sound/usb/usx2y/usb_stream.c +++ b/sound/usb/usx2y/usb_stream.c @@ -33,32 +33,26 @@ static unsigned usb_stream_next_packet_size(struct usb_stream_kernel *sk) static void playback_prep_freqn(struct usb_stream_kernel *sk, struct urb *urb) { struct usb_stream *s = sk->s; - unsigned l = 0; - int pack; - - urb->iso_frame_desc[0].offset = 0; - urb->iso_frame_desc[0].length = usb_stream_next_packet_size(sk); - sk->out_phase = sk->out_phase_peeked; - urb->transfer_buffer_length = urb->iso_frame_desc[0].length; - - for (pack = 1; pack < sk->n_o_ps; pack++) { - l = usb_stream_next_packet_size(sk); - if (s->idle_outsize + urb->transfer_buffer_length + l > - s->period_size) + int pack, lb = 0; + + for (pack = 0; pack < sk->n_o_ps; pack++) { + int l = usb_stream_next_packet_size(sk); + if (s->idle_outsize + lb + l > s->period_size) goto check; sk->out_phase = sk->out_phase_peeked; - urb->iso_frame_desc[pack].offset = urb->transfer_buffer_length; + urb->iso_frame_desc[pack].offset = lb; urb->iso_frame_desc[pack].length = l; - urb->transfer_buffer_length += l; + lb += l; } - snd_printdd(KERN_DEBUG "%i\n", urb->transfer_buffer_length); + snd_printdd(KERN_DEBUG "%i\n", lb); check: urb->number_of_packets = pack; - s->idle_outsize += urb->transfer_buffer_length - s->period_size; + urb->transfer_buffer_length = lb; + s->idle_outsize += lb - s->period_size; snd_printdd(KERN_DEBUG "idle=%i ul=%i ps=%i\n", s->idle_outsize, - urb->transfer_buffer_length, s->period_size); + lb, s->period_size); } static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize, @@ -282,21 +276,20 @@ static int usb_stream_prepare_playback(struct usb_stream_kernel *sk, struct usb_stream *s = sk->s; struct urb *io; struct usb_iso_packet_descriptor *id, *od; - int p, l = 0; + int p = 0, lb = 0, l = 0; io = sk->idle_outurb; od = io->iso_frame_desc; - io->transfer_buffer_length = 0; - for (p = 0; s->sync_packet < 0; ++p, ++s->sync_packet) { + for (; s->sync_packet < 0; ++p, ++s->sync_packet) { struct urb *ii = sk->completed_inurb; id = ii->iso_frame_desc + ii->number_of_packets + s->sync_packet; l = id->actual_length; od[p].length = l; - od[p].offset = io->transfer_buffer_length; - io->transfer_buffer_length += l; + od[p].offset = lb; + lb += l; } for (; @@ -304,38 +297,38 @@ static int usb_stream_prepare_playback(struct usb_stream_kernel *sk, ++p, ++s->sync_packet) { l = inurb->iso_frame_desc[s->sync_packet].actual_length; - if (s->idle_outsize + io->transfer_buffer_length + l > - s->period_size) + if (s->idle_outsize + lb + l > s->period_size) goto check_ok; od[p].length = l; - od[p].offset = io->transfer_buffer_length; - io->transfer_buffer_length += l; + od[p].offset = lb; + lb += l; } check_ok: s->sync_packet -= inurb->number_of_packets; - if (s->sync_packet < -2 || s->sync_packet > 0) { + if (unlikely(s->sync_packet < -2 || s->sync_packet > 0)) { snd_printk(KERN_WARNING "invalid sync_packet = %i;" " p=%i nop=%i %i %x %x %x > %x\n", s->sync_packet, p, inurb->number_of_packets, - s->idle_outsize + io->transfer_buffer_length + l, - s->idle_outsize, io->transfer_buffer_length, l, + s->idle_outsize + lb + l, + s->idle_outsize, lb, l, s->period_size); return -1; } - if (io->transfer_buffer_length % s->cfg.frame_size) { + if (unlikely(lb % s->cfg.frame_size)) { snd_printk(KERN_WARNING"invalid outsize = %i\n", - io->transfer_buffer_length); + lb); return -1; } - s->idle_outsize += io->transfer_buffer_length - s->period_size; + s->idle_outsize += lb - s->period_size; io->number_of_packets = p; - if (s->idle_outsize > 0) { - snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize); - return -1; - } - return 0; + io->transfer_buffer_length = lb; + if (s->idle_outsize <= 0) + return 0; + + snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize); + return -1; } static void prepare_inurb(int number_of_packets, struct urb *iu) -- cgit v0.10.2 From b80901bbf599553f483b9509f2dce416b938aae8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 16 Apr 2009 19:09:55 -0700 Subject: splice: fix new kernel-doc warnings splice: fix kernel-doc warnings Warning(fs/splice.c:617): bad line: Warning(fs/splice.c:722): No description found for parameter 'sd' Warning(fs/splice.c:722): Excess function parameter 'pipe' description in 'splice_from_pipe_begin' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds diff --git a/fs/splice.c b/fs/splice.c index 5384a90..666953d5 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -614,7 +614,6 @@ static void wakeup_pipe_writers(struct pipe_inode_info *pipe) * @actor: handler that splices the data * * Description: - * This function loops over the pipe and calls @actor to do the * actual moving of a single struct pipe_buffer to the desired * destination. It returns when there's no more buffers left in @@ -711,7 +710,7 @@ EXPORT_SYMBOL(splice_from_pipe_next); /** * splice_from_pipe_begin - start splicing from pipe - * @pipe: pipe to splice from + * @sd: information about the splice operation * * Description: * This function should be called before a loop containing -- cgit v0.10.2 From 1a297286868e13274ab02ec0626a00054fb0a5de Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 17 Apr 2009 11:39:38 +0200 Subject: ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR Those macros are just screwed as soon as CONFIG_PXA25x is enabled. This patch - changes ssp_set_scr to take an ssp_dev pointer instead of ssp_device - adds a corresponding ssp_get_scr function. Signed-off-by: Philipp Zabel Signed-off-by: Mark Brown diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 152118c..74ff69e 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -280,12 +280,33 @@ static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) * ssp_set_clkdiv - set SSP clock divider * @div: serial clock rate divider */ -static void ssp_set_scr(struct ssp_dev *dev, u32 div) +static void ssp_set_scr(struct ssp_device *ssp, u32 div) { - struct ssp_device *ssp = dev->ssp; - u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR; + u32 sscr0 = ssp_read_reg(ssp, SSCR0); + + if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) { + sscr0 &= ~0x0000ff00; + sscr0 |= ((div - 2)/2) << 8; /* 2..512 */ + } else { + sscr0 &= ~0x000fff00; + sscr0 |= (div - 1) << 8; /* 1..4096 */ + } + ssp_write_reg(ssp, SSCR0, sscr0); +} + +/** + * ssp_get_clkdiv - get SSP clock divider + */ +static u32 ssp_get_scr(struct ssp_device *ssp) +{ + u32 sscr0 = ssp_read_reg(ssp, SSCR0); + u32 div; - ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div))); + if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) + div = ((sscr0 >> 8) & 0xff) * 2 + 2; + else + div = ((sscr0 >> 8) & 0xfff) + 1; + return div; } /* @@ -326,7 +347,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, break; case PXA_SSP_CLK_AUDIO: priv->sysclk = 0; - ssp_set_scr(&priv->dev, 1); + ssp_set_scr(ssp, 1); sscr0 |= SSCR0_ACS; break; default: @@ -387,7 +408,7 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, ssp_write_reg(ssp, SSACD, val); break; case PXA_SSP_DIV_SCR: - ssp_set_scr(&priv->dev, div); + ssp_set_scr(ssp, div); break; default: return -ENODEV; @@ -674,8 +695,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, case SND_SOC_DAIFMT_I2S: sspsp = ssp_read_reg(ssp, SSPSP); - if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) && - (width == 16)) { + if ((ssp_get_scr(ssp) == 4) && (width == 16)) { /* This is a special case where the bitclk is 64fs * and we're not dealing with 2*32 bits of audio * samples. -- cgit v0.10.2 From b08f7a62cafd7998862072a1c353219e3d84bbef Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 17 Apr 2009 14:42:26 +0300 Subject: ASoC: OMAP: Update contact addresses My email address is going to expire soon so update it. Adding also Peter Ujfalusi as a second contact to OMAP core drivers since I won't have anymore access to non-public OMAP documentation in the future and Peter is working with these drivers as well. Signed-off-by: Jarkko Nikula Cc: Peter Ujfalusi Signed-off-by: Mark Brown diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index a6d1178..91ef179 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -3,7 +3,7 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -417,6 +417,6 @@ static void __exit n810_soc_exit(void) module_init(n810_soc_init); module_exit(n810_soc_exit); -MODULE_AUTHOR("Jarkko Nikula "); +MODULE_AUTHOR("Jarkko Nikula "); MODULE_DESCRIPTION("ALSA SoC Nokia N810"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 90f4df7..9126142 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -3,7 +3,8 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula + * Peter Ujfalusi * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -532,6 +533,6 @@ static void __exit snd_omap_mcbsp_exit(void) } module_exit(snd_omap_mcbsp_exit); -MODULE_AUTHOR("Jarkko Nikula "); +MODULE_AUTHOR("Jarkko Nikula "); MODULE_DESCRIPTION("OMAP I2S SoC Interface"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h index df7ad13..c8147aa 100644 --- a/sound/soc/omap/omap-mcbsp.h +++ b/sound/soc/omap/omap-mcbsp.h @@ -3,7 +3,8 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula + * Peter Ujfalusi * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 8e1431c..b078ed5 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -3,7 +3,8 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula + * Peter Ujfalusi * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -367,6 +368,6 @@ static void __exit omap_soc_platform_exit(void) } module_exit(omap_soc_platform_exit); -MODULE_AUTHOR("Jarkko Nikula "); +MODULE_AUTHOR("Jarkko Nikula "); MODULE_DESCRIPTION("OMAP PCM DMA module"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap-pcm.h b/sound/soc/omap/omap-pcm.h index e4369bd..8d9d269 100644 --- a/sound/soc/omap/omap-pcm.h +++ b/sound/soc/omap/omap-pcm.h @@ -3,7 +3,8 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula + * Peter Ujfalusi * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License -- cgit v0.10.2 From 150ace0db360373d2016a2497d252138a59c5ba8 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 17 Apr 2009 17:47:31 +0200 Subject: netfilter: ctnetlink: report error if event message allocation fails This patch fixes an inconsistency that results in no error reports to user-space listeners if we fail to allocate the event message. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index c6439c7..0ea36e0 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -512,7 +512,7 @@ static int ctnetlink_conntrack_event(struct notifier_block *this, skb = ctnetlink_alloc_skb(tuple(ct, IP_CT_DIR_ORIGINAL), GFP_ATOMIC); if (!skb) - return NOTIFY_DONE; + goto errout; b = skb->tail; @@ -591,8 +591,9 @@ static int ctnetlink_conntrack_event(struct notifier_block *this, nla_put_failure: rcu_read_unlock(); nlmsg_failure: - nfnetlink_set_err(0, group, -ENOBUFS); kfree_skb(skb); +errout: + nfnetlink_set_err(0, group, -ENOBUFS); return NOTIFY_DONE; } #endif /* CONFIG_NF_CONNTRACK_EVENTS */ @@ -1564,7 +1565,7 @@ static int ctnetlink_expect_event(struct notifier_block *this, skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC); if (!skb) - return NOTIFY_DONE; + goto errout; b = skb->tail; @@ -1589,8 +1590,9 @@ static int ctnetlink_expect_event(struct notifier_block *this, nla_put_failure: rcu_read_unlock(); nlmsg_failure: - nfnetlink_set_err(0, 0, -ENOBUFS); kfree_skb(skb); +errout: + nfnetlink_set_err(0, 0, -ENOBUFS); return NOTIFY_DONE; } #endif -- cgit v0.10.2 From a0142733a7ef2f3476e63938b330026a08c53f37 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 17 Apr 2009 17:48:44 +0200 Subject: netfilter: nfnetlink: return ENOMEM if we fail to create netlink socket With this patch, nfnetlink returns -ENOMEM instead of -EPERM if we fail to create the nfnetlink netlink socket during the module loading. This is exactly what rtnetlink does in this case. Ideally, it would be better if we propagate the error that has happened in netlink_kernel_create(), however, this function still does not implement this yet. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 2785d66..b8ab37a 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -203,7 +203,7 @@ static int __init nfnetlink_init(void) nfnetlink_rcv, NULL, THIS_MODULE); if (!nfnl) { printk(KERN_ERR "cannot initialize nfnetlink!\n"); - return -1; + return -ENOMEM; } return 0; -- cgit v0.10.2 From c8a250058656495be02c00de61e26b017c86ef00 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 17 Apr 2009 09:40:49 +0200 Subject: lockdep: more robust lockdep_map init sequence Steven Rostedt reported: > OK, I think I figured this bug out. This is a lockdep issue with respect > to tracepoints. > > The trace points in lockdep are called all the time. Outside the lockdep > logic. But if lockdep were to trigger an error / warning (which this run > did) we might be in trouble. For new locks, like the dentry->d_lock, that > are created, they will not get a name: > > void lockdep_init_map(struct lockdep_map *lock, const char *name, > struct lock_class_key *key, int subclass) > { > if (unlikely(!debug_locks)) > return; > > When a problem is found by lockdep, debug_locks becomes false. Thus we > stop allocating names for locks. This dentry->d_lock I had, now has no > name. Worse yet, I have CONFIG_DEBUG_VM set, that scrambles non > initialized memory. Thus, when the trace point was hit, it had junk for > the lock->name, and the machine crashed. Ah, nice catch. I think we should put at least the name in regardless. Ensure we at least initialize the trivial entries of the depmap so that they can be relied upon, even when lockdep itself decided to pack up and go home. [ Impact: fix lock tracing after lockdep warnings. ] Reported-by: Steven Rostedt Signed-off-by: Peter Zijlstra Acked-by: Steven Rostedt Cc: Andrew Morton Cc: Frederic Weisbecker LKML-Reference: <1239954049.23397.4156.camel@laptop> Signed-off-by: Ingo Molnar diff --git a/kernel/lockdep.c b/kernel/lockdep.c index b0f0118..accb40c 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -2490,13 +2490,20 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this, void lockdep_init_map(struct lockdep_map *lock, const char *name, struct lock_class_key *key, int subclass) { - if (unlikely(!debug_locks)) + lock->class_cache = NULL; +#ifdef CONFIG_LOCK_STAT + lock->cpu = raw_smp_processor_id(); +#endif + + if (DEBUG_LOCKS_WARN_ON(!name)) { + lock->name = "NULL"; return; + } + + lock->name = name; if (DEBUG_LOCKS_WARN_ON(!key)) return; - if (DEBUG_LOCKS_WARN_ON(!name)) - return; /* * Sanity check, the lock-class key must be persistent: */ @@ -2505,12 +2512,11 @@ void lockdep_init_map(struct lockdep_map *lock, const char *name, DEBUG_LOCKS_WARN_ON(1); return; } - lock->name = name; lock->key = key; - lock->class_cache = NULL; -#ifdef CONFIG_LOCK_STAT - lock->cpu = raw_smp_processor_id(); -#endif + + if (unlikely(!debug_locks)) + return; + if (subclass) register_lock_class(lock, subclass, 1); } -- cgit v0.10.2 From 93e82ae781e1ca4797cf2a226d3c303975bd99c7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 17 Apr 2009 18:04:41 +0200 Subject: ALSA: hda - Set function_id only on FG nodes (Re)set function_id only from the value on FG nodes. The current code overrides the value with the last widget. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index fd6e6f3..8820faf 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -642,19 +642,21 @@ static int get_codec_name(struct hda_codec *codec) */ static void /*__devinit*/ setup_fg_nodes(struct hda_codec *codec) { - int i, total_nodes; + int i, total_nodes, function_id; hda_nid_t nid; total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid); for (i = 0; i < total_nodes; i++, nid++) { - codec->function_id = snd_hda_param_read(codec, nid, + function_id = snd_hda_param_read(codec, nid, AC_PAR_FUNCTION_TYPE) & 0xff; - switch (codec->function_id) { + switch (function_id) { case AC_GRP_AUDIO_FUNCTION: codec->afg = nid; + codec->function_id = function_id; break; case AC_GRP_MODEM_FUNCTION: codec->mfg = nid; + codec->function_id = function_id; break; default: break; -- cgit v0.10.2 From d29a2e943867bfa48f72ee6e99723a1b29fe6f7e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 17 Apr 2009 12:22:35 +0100 Subject: vfat: Note the NLS requirement Close bug #4754. Stop people getting into a situation where they can't get their FAT filesystems to mount as they expect. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig index d0a69ff..182f9ff 100644 --- a/fs/fat/Kconfig +++ b/fs/fat/Kconfig @@ -95,3 +95,6 @@ config FAT_DEFAULT_IOCHARSET Note that "utf8" is not recommended for FAT filesystems. If unsure, you shouldn't set "utf8" here. See for more information. + + Enable any character sets you need in File Systems/Native Language + Support. -- cgit v0.10.2 From 6566abdbd0566fc1b5950c9f87ef57c7443d6fa8 Mon Sep 17 00:00:00 2001 From: Matt Kraai Date: Fri, 17 Apr 2009 12:56:38 +0100 Subject: AFS: Guard afs_file_readpage_read_complete() definition with CONFIG_AFS_FSCACHE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_AFS_FSCACHE is not defined, the following warning is displayed when fs/afs/file.c is compiled: fs/afs/file.c:111: warning: ‘afs_file_readpage_read_complete’ defined but not used This occurs because all calls to this function are guarded by CONFIG_AFS_FSCACHE. Thus, guard its definition as well. Signed-off-by: Matt Kraai Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/fs/afs/file.c b/fs/afs/file.c index 7a1d942..0149dab 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -102,6 +102,7 @@ int afs_release(struct inode *inode, struct file *file) return 0; } +#ifdef CONFIG_AFS_FSCACHE /* * deal with notification that a page was read from the cache */ @@ -117,6 +118,7 @@ static void afs_file_readpage_read_complete(struct page *page, SetPageUptodate(page); unlock_page(page); } +#endif /* * AFS read page from file, directory or symlink -- cgit v0.10.2 From df42654e90b3045691f4c327075897aed9691ebe Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 17 Apr 2009 09:59:27 -0700 Subject: Get rid of final remnants of include/asm-$(ARCH) This renames include/asm-h8300/timer.h into arch/h8300/include/asm: it was left over just because that file had been created in the -mm tree before the whole h8300 header subdirectory had been moved, and then got merged in the old location afterwards. (See commits e0b0f9e4ead2468f84c26332ec42b118e76af572: "h8300: update timer handler - new files" and 758db3f2118703a1e36374dae5d58bed963e7e0d: "[h8300] move include/asm-h8300 to arch/h8300/include/asm" for details). This also removes a left-over .gitignore file in include/asm-arm that became stale when the ARM header files were moved (which happened in multiple commits, just see "git log -- include/asm-arm" for details). Signed-off-by: Linus Torvalds diff --git a/arch/h8300/include/asm/timer.h b/arch/h8300/include/asm/timer.h new file mode 100644 index 0000000..def8046 --- /dev/null +++ b/arch/h8300/include/asm/timer.h @@ -0,0 +1,25 @@ +#ifndef __H8300_TIMER_H +#define __H8300_TIMER_H + +void h8300_timer_tick(void); +void h8300_timer_setup(void); +void h8300_gettod(unsigned int *year, unsigned int *mon, unsigned int *day, + unsigned int *hour, unsigned int *min, unsigned int *sec); + +#define TIMER_FREQ (CONFIG_CPU_CLOCK*10000) /* Timer input freq. */ + +#define calc_param(cnt, div, rate, limit) \ +do { \ + cnt = TIMER_FREQ / HZ; \ + for (div = 0; div < ARRAY_SIZE(divide_rate); div++) { \ + if (rate[div] == 0) \ + continue; \ + if ((cnt / rate[div]) > limit) \ + break; \ + } \ + if (div == ARRAY_SIZE(divide_rate)) \ + panic("Timer counter overflow"); \ + cnt /= divide_rate[div]; \ +} while(0) + +#endif diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore deleted file mode 100644 index e02c15d..0000000 --- a/include/asm-arm/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -arch -mach-types.h diff --git a/include/asm-h8300/timer.h b/include/asm-h8300/timer.h deleted file mode 100644 index def8046..0000000 --- a/include/asm-h8300/timer.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __H8300_TIMER_H -#define __H8300_TIMER_H - -void h8300_timer_tick(void); -void h8300_timer_setup(void); -void h8300_gettod(unsigned int *year, unsigned int *mon, unsigned int *day, - unsigned int *hour, unsigned int *min, unsigned int *sec); - -#define TIMER_FREQ (CONFIG_CPU_CLOCK*10000) /* Timer input freq. */ - -#define calc_param(cnt, div, rate, limit) \ -do { \ - cnt = TIMER_FREQ / HZ; \ - for (div = 0; div < ARRAY_SIZE(divide_rate); div++) { \ - if (rate[div] == 0) \ - continue; \ - if ((cnt / rate[div]) > limit) \ - break; \ - } \ - if (div == ARRAY_SIZE(divide_rate)) \ - panic("Timer counter overflow"); \ - cnt /= divide_rate[div]; \ -} while(0) - -#endif -- cgit v0.10.2 From 237e75bf1e558f7330f8deb167fa3116405bef2c Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Thu, 26 Mar 2009 00:45:27 -0700 Subject: usb gadget: fix ethernet link reports to ethtool The g_ether USB gadget driver currently decides whether or not there's a link to report back for eth_get_link based on if the USB link speed is set. The USB gadget speed is however often set even before the device is enumerated. It seems more sensible to only report a "link" if we're actually connected to a host that wants to talk to us. The patch below does this for me - tested with the PXA27x UDC driver. Signed-off-by: Jonathan McDowell Signed-off-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 96d65ca..4007770 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -175,12 +175,6 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info); } -static u32 eth_get_link(struct net_device *net) -{ - struct eth_dev *dev = netdev_priv(net); - return dev->gadget->speed != USB_SPEED_UNKNOWN; -} - /* REVISIT can also support: * - WOL (by tracking suspends and issuing remote wakeup) * - msglevel (implies updated messaging) @@ -189,7 +183,7 @@ static u32 eth_get_link(struct net_device *net) static struct ethtool_ops ops = { .get_drvinfo = eth_get_drvinfo, - .get_link = eth_get_link + .get_link = ethtool_op_get_link, }; static void defer_kevent(struct eth_dev *dev, int flag) -- cgit v0.10.2 From ae27d84351f1f3568118318a8c40ff3a154bd629 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Wed, 25 Mar 2009 11:32:59 +0100 Subject: USB: ftdi_sio: add vendor/project id for JETI specbos 1201 spectrometer Signed-off-by: Peter Korsgaard Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index dcc87aa..8100f1d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -668,6 +668,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(DE_VID, WHT_PID) }, { USB_DEVICE(ADI_VID, ADI_GNICE_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index daaf63d..c09f658 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -913,6 +913,13 @@ #define ADI_GNICE_PID 0xF000 /* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 -- cgit v0.10.2 From c00deaa542100a697acb5be200b9f54317c1cf69 Mon Sep 17 00:00:00 2001 From: Pascal Terjan Date: Tue, 7 Apr 2009 14:40:42 +0200 Subject: USB: option: Add ids for D-Link DWM-652 3.5G modem This patch allows D-Link DWM-652 3.5G modem to work. It is an express card but was only tested with the provided usb adapter as I don't have machines with express card connector. /dev/ttyUSB{0,1,2} get created, and using comgt on ttyUSB1 works fine : [root@plop tmp]# comgt -d /dev/ttyUSB1 -e Enter PIN number: XXXX Waiting for Registration..(120 sec max). Registered on Home network: "Orange France",2 Signal Quality: 15,99 From: Pascal Terjan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d560c0b..47bd070 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -300,6 +300,10 @@ static int option_resume(struct usb_serial *serial); #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 +#define DLINK_VENDOR_ID 0x1186 +#define DLINK_PRODUCT_DWM_652 0x3e04 + + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -516,6 +520,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, + { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ }; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1c1f643..6ff2b28 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1376,6 +1376,14 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, 0), +/* Reported by Pascal Terjan + * Ignore driver CD mode and force into modem mode by default. + */ +UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, + "D-Link", + "USB Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0), + /* Reported by Kevin Lloyd * Entry is needed for the initializer function override, * which instructs the device to load as a modem -- cgit v0.10.2 From f05932c0caf40c43af8a2c21adf7c46a00c436c4 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Sat, 4 Apr 2009 17:24:24 +0100 Subject: USB: qcserial: Add extra device IDs Add a set of device IDs from the Windows drivers. These aren't complete (there's a couple of cases where a QDL device is identified without the associated modem being identified), but it's better than the current situation. Signed-off-by: Matthew Garrett Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index e6d6b0c..7528b8d 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -26,6 +26,27 @@ static struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */ + {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */ + {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */ + {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */ + {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v0.10.2 From e13c594f3a1fc2c78e7a20d1a07974f71e4b448f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sat, 4 Apr 2009 09:25:15 +0200 Subject: USB: fix oops in cdc-wdm in case of malformed descriptors cdc-wdm needs to ignore extremely malformed descriptors. Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 3771d6e..34e6108 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -652,7 +652,7 @@ next_desc: iface = &intf->altsetting[0]; ep = &iface->endpoint[0].desc; - if (!usb_endpoint_is_int_in(ep)) { + if (!ep || !usb_endpoint_is_int_in(ep)) { rv = -EINVAL; goto err; } -- cgit v0.10.2 From 74bb35083d889c696a0f54be76ffe85a66dcbdc1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 26 Mar 2009 17:36:57 -0700 Subject: USB: musb_host, minor enqueue locking fix (v2) Someone noted that the enqueue path used an unlocked access for usb_host_endpoint->hcpriv ... fix that, by being safe and always accessing it under spinlock protection. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 499c431..ff09595 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1841,7 +1841,7 @@ static int musb_urb_enqueue( unsigned long flags; struct musb *musb = hcd_to_musb(hcd); struct usb_host_endpoint *hep = urb->ep; - struct musb_qh *qh = hep->hcpriv; + struct musb_qh *qh; struct usb_endpoint_descriptor *epd = &hep->desc; int ret; unsigned type_reg; @@ -1853,22 +1853,21 @@ static int musb_urb_enqueue( spin_lock_irqsave(&musb->lock, flags); ret = usb_hcd_link_urb_to_ep(hcd, urb); + qh = ret ? NULL : hep->hcpriv; + if (qh) + urb->hcpriv = qh; spin_unlock_irqrestore(&musb->lock, flags); - if (ret) - return ret; /* DMA mapping was already done, if needed, and this urb is on - * hep->urb_list ... so there's little to do unless hep wasn't - * yet scheduled onto a live qh. + * hep->urb_list now ... so we're done, unless hep wasn't yet + * scheduled onto a live qh. * * REVISIT best to keep hep->hcpriv valid until the endpoint gets * disabled, testing for empty qh->ring and avoiding qh setup costs * except for the first urb queued after a config change. */ - if (qh) { - urb->hcpriv = qh; - return 0; - } + if (qh || ret) + return ret; /* Allocate and initialize qh, minimizing the work done each time * hw_ep gets reprogrammed, or with irqs blocked. Then schedule it. -- cgit v0.10.2 From e4813eec8d47c8299d968bd5349dc881fa481c26 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Mar 2009 10:39:13 -0400 Subject: USB: usb-storage: augment unusual_devs entry for Simple Tech/Datafab This patch (as1227) adds the MAX_SECTORS_64 flag to the unusual_devs entry for the Simple Tech/Datafab controller. This fixes Bugzilla #12882. Signed-off-by: Alan Stern Reported-and-tested-by: binbin Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 6ff2b28..96db479 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -975,12 +975,14 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), -/* Reported by Rauch Wolke */ +/* Reported by Rauch Wolke + * and augmented by binbin (Bugzilla #12882) + */ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, "Simple Tech/Datafab", "CF+SM Reader", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_RESIDUE ), + US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ), /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant * to the USB storage specification in two ways: -- cgit v0.10.2 From 78322c1a64387673f46afb8b5e31edec94e9603d Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 26 Mar 2009 17:38:30 -0700 Subject: USB: musb_host, fix ep0 fifo flushing The MUSB host side can't share generic TX FIFO flush logic with EP0; the EP0 TX status register bits are different from those for other entpoints. Resolve this issue by providing a new EP0-specific routine to flush and reset the FIFO, which pays careful attention to restrictions listed in the latest programmer's guide. This gets rid of an open issue whereby the usbtest control write test (#14) failed. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index ff09595..521fd83 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -125,6 +125,29 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) } } +static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep) +{ + void __iomem *epio = ep->regs; + u16 csr; + int retries = 5; + + /* scrub any data left in the fifo */ + do { + csr = musb_readw(epio, MUSB_TXCSR); + if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY))) + break; + musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO); + csr = musb_readw(epio, MUSB_TXCSR); + udelay(10); + } while (--retries); + + WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n", + ep->epnum, csr); + + /* and reset for the next transfer */ + musb_writew(epio, MUSB_TXCSR, 0); +} + /* * Start transmit. Caller is responsible for locking shared resources. * musb must be locked. @@ -694,10 +717,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, csr = musb_readw(epio, MUSB_TXCSR); } else { /* endpoint 0: just flush */ - musb_writew(epio, MUSB_CSR0, - csr | MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, - csr | MUSB_CSR0_FLUSHFIFO); + musb_h_ep0_flush_fifo(hw_ep); } /* target addr and (for multipoint) hub addr/port */ @@ -1063,11 +1083,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) csr &= ~MUSB_CSR0_H_NAKTIMEOUT; musb_writew(epio, MUSB_CSR0, csr); } else { - csr |= MUSB_CSR0_FLUSHFIFO; - musb_writew(epio, MUSB_CSR0, csr); - musb_writew(epio, MUSB_CSR0, csr); - csr &= ~MUSB_CSR0_H_NAKTIMEOUT; - musb_writew(epio, MUSB_CSR0, csr); + musb_h_ep0_flush_fifo(hw_ep); } musb_writeb(epio, MUSB_NAKLIMIT0, 0); @@ -1081,10 +1097,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) * SHOULD NEVER HAPPEN! */ ERR("no URB for end 0\n"); - musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, 0); - + musb_h_ep0_flush_fifo(hw_ep); goto done; } @@ -2043,7 +2056,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in) * endpoint's irq status here to avoid bogus irqs. * clearing that status is platform-specific... */ - } else { + } else if (ep->epnum) { musb_h_tx_flush_fifo(ep); csr = musb_readw(epio, MUSB_TXCSR); csr &= ~(MUSB_TXCSR_AUTOSET @@ -2057,6 +2070,8 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in) musb_writew(epio, MUSB_TXCSR, csr); /* flush cpu writebuffer */ csr = musb_readw(epio, MUSB_TXCSR); + } else { + musb_h_ep0_flush_fifo(ep); } if (status == 0) musb_advance_schedule(ep->musb, urb, ep, is_in); -- cgit v0.10.2 From c7bbc056a92476b3b3d70a8df7cc746ac5d56de7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Mar 2009 18:26:40 -0700 Subject: USB: musb: bugfixes for multi-packet TXDMA support We really want to use DMA mode 1 for all multi-packet transfers; that's one IRQ on DMA completion, instead of one per packet. There is an important issue with such transfers, especially on the host side: when such transfers end with a full-size packet, we must defer musb_dma_completion() calls until the FIFO empties. Else we report URB completions too soon, and may clobber data in the FIFO fifo when writing the next packet (losing data). The Inventra DMA support uses DMA mode 1, but it ignores that issue. The CPPI DMA support uses mode 0, but doesn't handle its TXPKTRDY interrupts quite right either; it can get stale "packet ready" interrupts, and report transfer completion too early using slightly different code paths, also losing data. So I'm solving it in a generic way -- by adding a sort of the "interrupt filter" into musb_host_tx(), catching these cases where a DMA completion IRQ doesn't suffice and removing some needlessly controller-specific logic. When a TXDMA interrupt happens and DMA request mode 1 is active, that filter resets to mode 0 and defers URB completion processing until TXPKTRDY, unless the FIFO is already empty. Related filtering logic in Inventra and CPPI code gets removed. Since it should be competely safe now to use the DMA request mode 1 for host side transfers with the CPPI DMA controller, set it in musb_h_tx_dma_start() ... now renamed (and shared). [ dbrownell@users.sourceforge.net: don't introduce more CamElCase; use more concise explanations ] Signed-off-by: Sergei Shtylyov Cc: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 569ef0f..30e2489 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1228,27 +1228,7 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx) hw_ep = tx_ch->hw_ep; - /* Peripheral role never repurposes the - * endpoint, so immediate completion is - * safe. Host role waits for the fifo - * to empty (TXPKTRDY irq) before going - * to the next queued bulk transfer. - */ - if (is_host_active(cppi->musb)) { -#if 0 - /* WORKAROUND because we may - * not always get TXKPTRDY ... - */ - int csr; - - csr = musb_readw(hw_ep->regs, - MUSB_TXCSR); - if (csr & MUSB_TXCSR_TXPKTRDY) -#endif - completed = false; - } - if (completed) - musb_dma_completion(musb, index + 1, 1); + musb_dma_completion(musb, index + 1, 1); } else { /* Bigger transfer than we could fit in diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 521fd83..518abfc 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -4,6 +4,7 @@ * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation + * Copyright (C) 2008-2009 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -168,13 +169,15 @@ static inline void musb_h_tx_start(struct musb_hw_ep *ep) } -static inline void cppi_host_txdma_start(struct musb_hw_ep *ep) +static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep) { u16 txcsr; /* NOTE: no locks here; caller should lock and select EP */ txcsr = musb_readw(ep->regs, MUSB_TXCSR); txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS; + if (is_cppi_enabled()) + txcsr |= MUSB_TXCSR_DMAMODE; musb_writew(ep->regs, MUSB_TXCSR, txcsr); } @@ -279,7 +282,7 @@ start: if (!hw_ep->tx_channel) musb_h_tx_start(hw_ep); else if (is_cppi_enabled() || tusb_dma_omap()) - cppi_host_txdma_start(hw_ep); + musb_h_tx_dma_start(hw_ep); } } @@ -1250,6 +1253,67 @@ void musb_host_tx(struct musb *musb, u8 epnum) } + if (is_dma_capable() && dma && !status) { + /* + * DMA has completed. But if we're using DMA mode 1 (multi + * packet DMA), we need a terminal TXPKTRDY interrupt before + * we can consider this transfer completed, lest we trash + * its last packet when writing the next URB's data. So we + * switch back to mode 0 to get that interrupt; we'll come + * back here once it happens. + */ + if (tx_csr & MUSB_TXCSR_DMAMODE) { + /* + * We shouldn't clear DMAMODE with DMAENAB set; so + * clear them in a safe order. That should be OK + * once TXPKTRDY has been set (and I've never seen + * it being 0 at this moment -- DMA interrupt latency + * is significant) but if it hasn't been then we have + * no choice but to stop being polite and ignore the + * programmer's guide... :-) + * + * Note that we must write TXCSR with TXPKTRDY cleared + * in order not to re-trigger the packet send (this bit + * can't be cleared by CPU), and there's another caveat: + * TXPKTRDY may be set shortly and then cleared in the + * double-buffered FIFO mode, so we do an extra TXCSR + * read for debouncing... + */ + tx_csr &= musb_readw(epio, MUSB_TXCSR); + if (tx_csr & MUSB_TXCSR_TXPKTRDY) { + tx_csr &= ~(MUSB_TXCSR_DMAENAB | + MUSB_TXCSR_TXPKTRDY); + musb_writew(epio, MUSB_TXCSR, + tx_csr | MUSB_TXCSR_H_WZC_BITS); + } + tx_csr &= ~(MUSB_TXCSR_DMAMODE | + MUSB_TXCSR_TXPKTRDY); + musb_writew(epio, MUSB_TXCSR, + tx_csr | MUSB_TXCSR_H_WZC_BITS); + + /* + * There is no guarantee that we'll get an interrupt + * after clearing DMAMODE as we might have done this + * too late (after TXPKTRDY was cleared by controller). + * Re-read TXCSR as we have spoiled its previous value. + */ + tx_csr = musb_readw(epio, MUSB_TXCSR); + } + + /* + * We may get here from a DMA completion or TXPKTRDY interrupt. + * In any case, we must check the FIFO status here and bail out + * only if the FIFO still has data -- that should prevent the + * "missed" TXPKTRDY interrupts and deal with double-buffered + * FIFO mode too... + */ + if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) { + DBG(2, "DMA complete but packet still in FIFO, " + "CSR %04x\n", tx_csr); + return; + } + } + /* REVISIT this looks wrong... */ if (!status || dma || usb_pipeisoc(pipe)) { if (dma) diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 8662e9e..de0e242 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -304,12 +304,9 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) musb_channel->epnum, MUSB_TXCSR), MUSB_TXCSR_TXPKTRDY); - } else { - musb_dma_completion( - musb, - musb_channel->epnum, - musb_channel->transmit); } + musb_dma_completion(musb, musb_channel->epnum, + musb_channel->transmit); } } } -- cgit v0.10.2 From b6e434a5404b9ce8c285ea081b6ea5c523b29db4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Mar 2009 18:27:47 -0700 Subject: USB: musb: sanitize clearing TXCSR DMA bits (take 2) The MUSB code clears TXCSR_DMAMODE incorrectly in several places, either asserting that TXCSR_DMAENAB is clear (when sometimes it isn't) or clearing both bits together. Recent versions of the programmer's guide require DMAENAB to be cleared first, although some older ones didn't. Fix this and while at it: - In musb_gadget::txstate(), stop clearing the AUTOSET and DMAMODE bits for the CPPI case since they never get set anyway (the former bit is reserved on DaVinci); but do clear the DMAENAB bit on the DMA error path. - In musb_host::musb_ep_program(), remove the duplicate DMA controller specific code code clearing the TXCSR previous state, add the code to clear TXCSR DMA bits on the Inventra DMA error path, to replace such code (executed late) on the PIO path. - In musbhsdma::dma_channel_abort()/dma_controller_irq(), add/use the 'offset' variable to avoid MUSB_EP_OFFSET() invocations on every RXCSR/TXCSR access. [dbrownell@users.sourceforge.net: don't introduce CamelCase, shrink diff] Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c7ebd08..f79440c 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -165,9 +165,15 @@ static void nuke(struct musb_ep *ep, const int status) if (is_dma_capable() && ep->dma) { struct dma_controller *c = ep->musb->dma_controller; int value; + if (ep->is_in) { + /* + * The programming guide says that we must not clear + * the DMAMODE bit before DMAENAB, so we only + * clear it in the second write... + */ musb_writew(epio, MUSB_TXCSR, - 0 | MUSB_TXCSR_FLUSHFIFO); + MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO); musb_writew(epio, MUSB_TXCSR, 0 | MUSB_TXCSR_FLUSHFIFO); } else { @@ -230,7 +236,7 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep) | IN token(s) are recd from Host. | -> DMA interrupt on completion | calls TxAvail. - | -> stop DMA, ~DmaEenab, + | -> stop DMA, ~DMAENAB, | -> set TxPktRdy for last short pkt or zlp | -> Complete Request | -> Continue next request (call txstate) @@ -315,9 +321,17 @@ static void txstate(struct musb *musb, struct musb_request *req) request->dma, request_size); if (use_dma) { if (musb_ep->dma->desired_mode == 0) { - /* ASSERT: DMAENAB is clear */ - csr &= ~(MUSB_TXCSR_AUTOSET | - MUSB_TXCSR_DMAMODE); + /* + * We must not clear the DMAMODE bit + * before the DMAENAB bit -- and the + * latter doesn't always get cleared + * before we get here... + */ + csr &= ~(MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAENAB); + musb_writew(epio, MUSB_TXCSR, csr + | MUSB_TXCSR_P_WZC_BITS); + csr &= ~MUSB_TXCSR_DMAMODE; csr |= (MUSB_TXCSR_DMAENAB | MUSB_TXCSR_MODE); /* against programming guide */ @@ -334,10 +348,7 @@ static void txstate(struct musb *musb, struct musb_request *req) #elif defined(CONFIG_USB_TI_CPPI_DMA) /* program endpoint CSR first, then setup DMA */ - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_P_UNDERRUN - | MUSB_TXCSR_TXPKTRDY); + csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY); csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB; musb_writew(epio, MUSB_TXCSR, (MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN) @@ -364,8 +375,8 @@ static void txstate(struct musb *musb, struct musb_request *req) if (!use_dma) { c->channel_release(musb_ep->dma); musb_ep->dma = NULL; - /* ASSERT: DMAENAB clear */ - csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); + csr &= ~MUSB_TXCSR_DMAENAB; + musb_writew(epio, MUSB_TXCSR, csr); /* invariant: prequest->buf is non-null */ } #elif defined(CONFIG_USB_TUSB_OMAP_DMA) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 518abfc..1dfaaa6 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -593,10 +593,17 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) csr = musb_readw(ep->regs, MUSB_TXCSR); if (csr & MUSB_TXCSR_MODE) { musb_h_tx_flush_fifo(ep); + csr = musb_readw(ep->regs, MUSB_TXCSR); musb_writew(ep->regs, MUSB_TXCSR, - MUSB_TXCSR_FRCDATATOG); + csr | MUSB_TXCSR_FRCDATATOG); } - /* clear mode (and everything else) to enable Rx */ + + /* + * Clear the MODE bit (and everything else) to enable Rx. + * NOTE: we mustn't clear the DMAMODE bit before DMAENAB. + */ + if (csr & MUSB_TXCSR_DMAMODE) + musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE); musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ @@ -693,12 +700,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* general endpoint setup */ if (epnum) { - /* ASSERT: TXCSR_DMAENAB was already cleared */ - /* flush all old state, set default */ musb_h_tx_flush_fifo(hw_ep); + + /* + * We must not clear the DMAMODE bit before or in + * the same cycle with the DMAENAB bit, so we clear + * the latter first... + */ csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT - | MUSB_TXCSR_DMAMODE + | MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAENAB | MUSB_TXCSR_FRCDATATOG | MUSB_TXCSR_H_RXSTALL | MUSB_TXCSR_H_ERROR @@ -706,16 +718,15 @@ static void musb_ep_program(struct musb *musb, u8 epnum, ); csr |= MUSB_TXCSR_MODE; - if (usb_gettoggle(urb->dev, - qh->epnum, 1)) + if (usb_gettoggle(urb->dev, qh->epnum, 1)) csr |= MUSB_TXCSR_H_WR_DATATOGGLE | MUSB_TXCSR_H_DATATOGGLE; else csr |= MUSB_TXCSR_CLRDATATOG; - /* twice in case of double packet buffering */ musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may need to clear FLUSHFIFO ... */ + csr &= ~MUSB_TXCSR_DMAMODE; musb_writew(epio, MUSB_TXCSR, csr); csr = musb_readw(epio, MUSB_TXCSR); } else { @@ -759,34 +770,19 @@ static void musb_ep_program(struct musb *musb, u8 epnum, #ifdef CONFIG_USB_INVENTRA_DMA if (dma_channel) { - - /* clear previous state */ - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_DMAENAB); - csr |= MUSB_TXCSR_MODE; - musb_writew(epio, MUSB_TXCSR, - csr | MUSB_TXCSR_MODE); - qh->segsize = min(len, dma_channel->max_len); - if (qh->segsize <= packet_sz) dma_channel->desired_mode = 0; else dma_channel->desired_mode = 1; - if (dma_channel->desired_mode == 0) { - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE); + /* Against the programming guide */ csr |= (MUSB_TXCSR_DMAENAB); - /* against programming guide */ } else csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE); - musb_writew(epio, MUSB_TXCSR, csr); dma_ok = dma_controller->channel_program( @@ -803,6 +799,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum, else hw_ep->rx_channel = NULL; dma_channel = NULL; + + /* + * The programming guide says that we must + * clear the DMAENAB bit before DMAMODE... + */ + csr = musb_readw(epio, MUSB_TXCSR); + csr &= ~(MUSB_TXCSR_DMAENAB + | MUSB_TXCSR_AUTOSET); + musb_writew(epio, MUSB_TXCSR, csr); + csr &= ~MUSB_TXCSR_DMAMODE; + musb_writew(epio, MUSB_TXCSR, csr); } } #endif @@ -810,18 +817,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* candidate for DMA */ if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) { - /* program endpoint CSRs first, then setup DMA. - * assume CPPI setup succeeds. - * defer enabling dma. - */ - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_DMAENAB); - csr |= MUSB_TXCSR_MODE; - musb_writew(epio, MUSB_TXCSR, - csr | MUSB_TXCSR_MODE); - + /* Defer enabling DMA */ dma_channel->actual_len = 0L; qh->segsize = len; @@ -850,20 +846,9 @@ static void musb_ep_program(struct musb *musb, u8 epnum, } if (load_count) { - /* ASSERT: TXCSR_DMAENAB was already cleared */ - /* PIO to load FIFO */ qh->segsize = load_count; musb_write_fifo(hw_ep, load_count, buf); - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_DMAENAB - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_AUTOSET); - /* write CSR */ - csr |= MUSB_TXCSR_MODE; - - if (epnum) - musb_writew(epio, MUSB_TXCSR, csr); } /* re-enable interrupt */ diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index de0e242..5e83f96 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -195,30 +195,32 @@ static int dma_channel_abort(struct dma_channel *channel) void __iomem *mbase = musb_channel->controller->base; u8 bchannel = musb_channel->idx; + int offset; u16 csr; if (channel->status == MUSB_DMA_STATUS_BUSY) { if (musb_channel->transmit) { - - csr = musb_readw(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, - MUSB_TXCSR)); - csr &= ~(MUSB_TXCSR_AUTOSET | - MUSB_TXCSR_DMAENAB | - MUSB_TXCSR_DMAMODE); - musb_writew(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR), - csr); + offset = MUSB_EP_OFFSET(musb_channel->epnum, + MUSB_TXCSR); + + /* + * The programming guide says that we must clear + * the DMAENAB bit before the DMAMODE bit... + */ + csr = musb_readw(mbase, offset); + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); + musb_writew(mbase, offset, csr); + csr &= ~MUSB_TXCSR_DMAMODE; + musb_writew(mbase, offset, csr); } else { - csr = musb_readw(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, - MUSB_RXCSR)); + offset = MUSB_EP_OFFSET(musb_channel->epnum, + MUSB_RXCSR); + + csr = musb_readw(mbase, offset); csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB | MUSB_RXCSR_DMAMODE); - musb_writew(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR), - csr); + musb_writew(mbase, offset, csr); } musb_writew(mbase, @@ -296,14 +298,25 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) && ((channel->desired_mode == 0) || (channel->actual_len & (musb_channel->max_packet_sz - 1))) - ) { + ) { + u8 epnum = musb_channel->epnum; + int offset = MUSB_EP_OFFSET(epnum, + MUSB_TXCSR); + u16 txcsr; + + /* + * The programming guide says that we + * must clear DMAENAB before DMAMODE. + */ + musb_ep_select(mbase, epnum); + txcsr = musb_readw(mbase, offset); + txcsr &= ~(MUSB_TXCSR_DMAENAB + | MUSB_TXCSR_AUTOSET); + musb_writew(mbase, offset, txcsr); /* Send out the packet */ - musb_ep_select(mbase, - musb_channel->epnum); - musb_writew(mbase, MUSB_EP_OFFSET( - musb_channel->epnum, - MUSB_TXCSR), - MUSB_TXCSR_TXPKTRDY); + txcsr &= ~MUSB_TXCSR_DMAMODE; + txcsr |= MUSB_TXCSR_TXPKTRDY; + musb_writew(mbase, offset, txcsr); } musb_dma_completion(musb, musb_channel->epnum, musb_channel->transmit); -- cgit v0.10.2 From 6b6e97107f12f3a9f7b5b43a6c3b94409240bcff Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Mar 2009 18:29:19 -0700 Subject: USB: musb: fix isochronous TXDMA (take 2) Multi-frame isochronous TX URBs transfers in DMA mode never complete with CPPI DMA because musb_host_tx() doesn't restart DMA on the second frame, only emitting a debug message. With Inventra DMA they complete, but in PIO mode. To fix: - Factor out programming of the DMA transfer from musb_ep_program() into musb_tx_dma_program(); - Reorder the code at the end of musb_host_tx() to facilitate the fallback to PIO iff DMA fails; - Handle the buffer offset consistently for both PIO and DMA modes; - Add an argument to musb_ep_program() for the same reason (it only worked correctly with non-zero offset of the first frame in PIO mode); - Set the completed isochronous frame descriptor's 'actual_length' and 'status' fields correctly in DMA mode. Also, since CPPI reportedly doesn't like sending isochronous packets in the RNDIS mode, change the criterion for this mode to be used only for multi-packet transfers. (There's no need for that mode in the single-packet case anyway.) [ dbrownell@users.sourceforge.net: split comment paragraph into bullet list, shrink patch delta, style tweaks ] Signed-off-by: Pavel Kiryukhin Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 30e2489..1976e9b 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -579,6 +579,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) * trigger the "send a ZLP?" confusion. */ rndis = (maxpacket & 0x3f) == 0 + && length > maxpacket && length < 0xffff && (length % maxpacket) != 0; diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 1dfaaa6..db1b574 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -97,8 +97,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum, - struct urb *urb, unsigned int nOut, - u8 *buf, u32 len); + struct urb *urb, int is_out, + u8 *buf, u32 offset, u32 len); /* * Clear TX fifo. Needed to avoid BABBLE errors. @@ -192,9 +192,10 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) { u16 frame; u32 len; - void *buf; void __iomem *mbase = musb->mregs; struct urb *urb = next_urb(qh); + void *buf = urb->transfer_buffer; + u32 offset = 0; struct musb_hw_ep *hw_ep = qh->hw_ep; unsigned pipe = urb->pipe; u8 address = usb_pipedevice(pipe); @@ -217,7 +218,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: qh->iso_idx = 0; qh->frame = 0; - buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset; + offset = urb->iso_frame_desc[0].offset; len = urb->iso_frame_desc[0].length; break; default: /* bulk, interrupt */ @@ -235,14 +236,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break; default: s = "-intr"; break; }; s; }), - epnum, buf, len); + epnum, buf + offset, len); /* Configure endpoint */ if (is_in || hw_ep->is_shared_fifo) hw_ep->in_qh = qh; else hw_ep->out_qh = qh; - musb_ep_program(musb, epnum, urb, !is_in, buf, len); + musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len); /* transmit may have more work: start it when it is time */ if (is_in) @@ -253,7 +254,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: DBG(3, "check whether there's still time for periodic Tx\n"); - qh->iso_idx = 0; frame = musb_readw(mbase, MUSB_FRAME); /* FIXME this doesn't implement that scheduling policy ... * or handle framecounter wrapping @@ -634,14 +634,68 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) ep->rx_reinit = 0; } +static bool musb_tx_dma_program(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, struct musb_qh *qh, + struct urb *urb, u32 offset, u32 length) +{ + struct dma_channel *channel = hw_ep->tx_channel; + void __iomem *epio = hw_ep->regs; + u16 pkt_size = qh->maxpacket; + u16 csr; + u8 mode; + +#ifdef CONFIG_USB_INVENTRA_DMA + if (length > channel->max_len) + length = channel->max_len; + + csr = musb_readw(epio, MUSB_TXCSR); + if (length > pkt_size) { + mode = 1; + csr |= MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAMODE + | MUSB_TXCSR_DMAENAB; + } else { + mode = 0; + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); + csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */ + } + channel->desired_mode = mode; + musb_writew(epio, MUSB_TXCSR, csr); +#else + if (!is_cppi_enabled() && !tusb_dma_omap()) + return false; + + channel->actual_len = 0; + + /* + * TX uses "RNDIS" mode automatically but needs help + * to identify the zero-length-final-packet case. + */ + mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0; +#endif + + qh->segsize = length; + + if (!dma->channel_program(channel, pkt_size, mode, + urb->transfer_dma + offset, length)) { + dma->channel_release(channel); + hw_ep->tx_channel = NULL; + + csr = musb_readw(epio, MUSB_TXCSR); + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); + musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS); + return false; + } + return true; +} /* * Program an HDRC endpoint as per the given URB * Context: irqs blocked, controller lock held */ static void musb_ep_program(struct musb *musb, u8 epnum, - struct urb *urb, unsigned int is_out, - u8 *buf, u32 len) + struct urb *urb, int is_out, + u8 *buf, u32 offset, u32 len) { struct dma_controller *dma_controller; struct dma_channel *dma_channel; @@ -768,82 +822,9 @@ static void musb_ep_program(struct musb *musb, u8 epnum, else load_count = min((u32) packet_sz, len); -#ifdef CONFIG_USB_INVENTRA_DMA - if (dma_channel) { - qh->segsize = min(len, dma_channel->max_len); - if (qh->segsize <= packet_sz) - dma_channel->desired_mode = 0; - else - dma_channel->desired_mode = 1; - - if (dma_channel->desired_mode == 0) { - /* Against the programming guide */ - csr |= (MUSB_TXCSR_DMAENAB); - } else - csr |= (MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAENAB - | MUSB_TXCSR_DMAMODE); - musb_writew(epio, MUSB_TXCSR, csr); - - dma_ok = dma_controller->channel_program( - dma_channel, packet_sz, - dma_channel->desired_mode, - urb->transfer_dma, - qh->segsize); - if (dma_ok) { - load_count = 0; - } else { - dma_controller->channel_release(dma_channel); - if (is_out) - hw_ep->tx_channel = NULL; - else - hw_ep->rx_channel = NULL; - dma_channel = NULL; - - /* - * The programming guide says that we must - * clear the DMAENAB bit before DMAMODE... - */ - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_DMAENAB - | MUSB_TXCSR_AUTOSET); - musb_writew(epio, MUSB_TXCSR, csr); - csr &= ~MUSB_TXCSR_DMAMODE; - musb_writew(epio, MUSB_TXCSR, csr); - } - } -#endif - - /* candidate for DMA */ - if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) { - - /* Defer enabling DMA */ - dma_channel->actual_len = 0L; - qh->segsize = len; - - /* TX uses "rndis" mode automatically, but needs help - * to identify the zero-length-final-packet case. - */ - dma_ok = dma_controller->channel_program( - dma_channel, packet_sz, - (urb->transfer_flags - & URB_ZERO_PACKET) - == URB_ZERO_PACKET, - urb->transfer_dma, - qh->segsize); - if (dma_ok) { - load_count = 0; - } else { - dma_controller->channel_release(dma_channel); - hw_ep->tx_channel = NULL; - dma_channel = NULL; - - /* REVISIT there's an error path here that - * needs handling: can't do dma, but - * there's no pio buffer address... - */ - } - } + if (dma_channel && musb_tx_dma_program(dma_controller, + hw_ep, qh, urb, offset, len)) + load_count = 0; if (load_count) { /* PIO to load FIFO */ @@ -903,7 +884,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, dma_channel, packet_sz, !(urb->transfer_flags & URB_SHORT_NOT_OK), - urb->transfer_dma, + urb->transfer_dma + offset, qh->segsize); if (!dma_ok) { dma_controller->channel_release( @@ -1146,8 +1127,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) int pipe; bool done = false; u16 tx_csr; - size_t wLength = 0; - u8 *buf = NULL; + size_t length = 0; + size_t offset = 0; struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; void __iomem *epio = hw_ep->regs; @@ -1165,7 +1146,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* with CPPI, DMA sometimes triggers "extra" irqs */ if (!urb) { DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); - goto finish; + return; } pipe = urb->pipe; @@ -1202,7 +1183,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); - goto finish; + return; } if (status) { @@ -1234,8 +1215,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* second cppi case */ if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); - goto finish; - + return; } if (is_dma_capable() && dma && !status) { @@ -1299,25 +1279,25 @@ void musb_host_tx(struct musb *musb, u8 epnum) } } - /* REVISIT this looks wrong... */ if (!status || dma || usb_pipeisoc(pipe)) { if (dma) - wLength = dma->actual_len; + length = dma->actual_len; else - wLength = qh->segsize; - qh->offset += wLength; + length = qh->segsize; + qh->offset += length; if (usb_pipeisoc(pipe)) { struct usb_iso_packet_descriptor *d; d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length = qh->segsize; + d->actual_length = length; + d->status = status; if (++qh->iso_idx >= urb->number_of_packets) { done = true; } else { d++; - buf = urb->transfer_buffer + d->offset; - wLength = d->length; + offset = d->offset; + length = d->length; } } else if (dma) { done = true; @@ -1330,10 +1310,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) & URB_ZERO_PACKET)) done = true; if (!done) { - buf = urb->transfer_buffer - + qh->offset; - wLength = urb->transfer_buffer_length - - qh->offset; + offset = qh->offset; + length = urb->transfer_buffer_length - offset; } } } @@ -1352,28 +1330,31 @@ void musb_host_tx(struct musb *musb, u8 epnum) urb->status = status; urb->actual_length = qh->offset; musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT); + return; + } else if (usb_pipeisoc(pipe) && dma) { + if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb, + offset, length)) + return; + } else if (tx_csr & MUSB_TXCSR_DMAENAB) { + DBG(1, "not complete, but DMA enabled?\n"); + return; + } - } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) { - /* WARN_ON(!buf); */ - - /* REVISIT: some docs say that when hw_ep->tx_double_buffered, - * (and presumably, fifo is not half-full) we should write TWO - * packets before updating TXCSR ... other docs disagree ... - */ - /* PIO: start next packet in this URB */ - if (wLength > qh->maxpacket) - wLength = qh->maxpacket; - musb_write_fifo(hw_ep, wLength, buf); - qh->segsize = wLength; - - musb_ep_select(mbase, epnum); - musb_writew(epio, MUSB_TXCSR, - MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); - } else - DBG(1, "not complete, but dma enabled?\n"); + /* + * PIO: start next packet in this URB. + * + * REVISIT: some docs say that when hw_ep->tx_double_buffered, + * (and presumably, FIFO is not half-full) we should write *two* + * packets before updating TXCSR; other docs disagree... + */ + if (length > qh->maxpacket) + length = qh->maxpacket; + musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); + qh->segsize = length; -finish: - return; + musb_ep_select(mbase, epnum); + musb_writew(epio, MUSB_TXCSR, + MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); } -- cgit v0.10.2 From 0ec8fd70fbd7327e1bf747c4a2f6b67efdf16618 Mon Sep 17 00:00:00 2001 From: Kim Kyuwon Date: Thu, 26 Mar 2009 18:56:51 -0700 Subject: USB: musb: fix possible panic while resuming During driver resume processing, musb could cause a kernel panic. Fix by enabling the clock earlier, with the resume_early method. Signed-off-by: Kim Kyuwon Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 338cd16..0112353 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2170,26 +2170,22 @@ static int musb_suspend(struct platform_device *pdev, pm_message_t message) return 0; } -static int musb_resume(struct platform_device *pdev) +static int musb_resume_early(struct platform_device *pdev) { - unsigned long flags; struct musb *musb = dev_to_musb(&pdev->dev); if (!musb->clock) return 0; - spin_lock_irqsave(&musb->lock, flags); - if (musb->set_clock) musb->set_clock(musb->clock, 1); else clk_enable(musb->clock); /* for static cmos like DaVinci, register values were preserved - * unless for some reason the whole soc powered down and we're - * not treating that as a whole-system restart (e.g. swsusp) + * unless for some reason the whole soc powered down or the USB + * module got reset through the PSC (vs just being disabled). */ - spin_unlock_irqrestore(&musb->lock, flags); return 0; } @@ -2207,7 +2203,7 @@ static struct platform_driver musb_driver = { .remove = __devexit_p(musb_remove), .shutdown = musb_shutdown, .suspend = musb_suspend, - .resume = musb_resume, + .resume_early = musb_resume_early, }; /*-------------------------------------------------------------------------*/ -- cgit v0.10.2 From c7877e1983f051cc267e1ec8c232a02d23c0a82a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 7 Apr 2009 11:56:32 -0700 Subject: Revert USB: usb-serial ch341: support for DTR/RTS/CTS Reverts commit 664d5df92e88b6ef091048a802b3750f4e989180 as the commit log information was not complete, and we didn't have a proper signed-off-by by the author of the original BSD code. Cc: Werner Cornelius Cc: Boris Hajduk Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index ab4cc27..d33d39d 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -1,7 +1,5 @@ /* * Copyright 2007, Frank A Kingswood - * Copyright 2007, Werner Cornelius - * Copyright 2009, Boris Hajduk * * ch341.c implements a serial port driver for the Winchiphead CH341. * @@ -23,39 +21,9 @@ #include #include -#define DEFAULT_BAUD_RATE 9600 +#define DEFAULT_BAUD_RATE 2400 #define DEFAULT_TIMEOUT 1000 -/* flags for IO-Bits */ -#define CH341_BIT_RTS (1 << 6) -#define CH341_BIT_DTR (1 << 5) - -/******************************/ -/* interrupt pipe definitions */ -/******************************/ -/* always 4 interrupt bytes */ -/* first irq byte normally 0x08 */ -/* second irq byte base 0x7d + below */ -/* third irq byte base 0x94 + below */ -/* fourth irq byte normally 0xee */ - -/* second interrupt byte */ -#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */ - -/* status returned in third interrupt answer byte, inverted in data - from irq */ -#define CH341_BIT_CTS 0x01 -#define CH341_BIT_DSR 0x02 -#define CH341_BIT_RI 0x04 -#define CH341_BIT_DCD 0x08 -#define CH341_BITS_MODEM_STAT 0x0f /* all bits */ - -/*******************************/ -/* baudrate calculation factor */ -/*******************************/ -#define CH341_BAUDBASE_FACTOR 1532620800 -#define CH341_BAUDBASE_DIVMAX 3 - static int debug; static struct usb_device_id id_table [] = { @@ -66,12 +34,9 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); struct ch341_private { - spinlock_t lock; /* access lock */ - wait_queue_head_t delta_msr_wait; /* wait queue for modem status */ - unsigned baud_rate; /* set baud rate */ - u8 line_control; /* set line control value RTS/DTR */ - u8 line_status; /* active status of modem control inputs */ - u8 multi_status_change; /* status changed multiple since last call */ + unsigned baud_rate; + u8 dtr; + u8 rts; }; static int ch341_control_out(struct usb_device *dev, u8 request, @@ -107,28 +72,37 @@ static int ch341_set_baudrate(struct usb_device *dev, { short a, b; int r; - unsigned long factor; - short divisor; dbg("ch341_set_baudrate(%d)", priv->baud_rate); - - if (!priv->baud_rate) + switch (priv->baud_rate) { + case 2400: + a = 0xd901; + b = 0x0038; + break; + case 4800: + a = 0x6402; + b = 0x001f; + break; + case 9600: + a = 0xb202; + b = 0x0013; + break; + case 19200: + a = 0xd902; + b = 0x000d; + break; + case 38400: + a = 0x6403; + b = 0x000a; + break; + case 115200: + a = 0xcc03; + b = 0x0008; + break; + default: return -EINVAL; - factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate); - divisor = CH341_BAUDBASE_DIVMAX; - - while ((factor > 0xfff0) && divisor) { - factor >>= 3; - divisor--; } - if (factor > 0xfff0) - return -EINVAL; - - factor = 0x10000 - factor; - a = (factor & 0xff00) | divisor; - b = factor & 0xff; - r = ch341_control_out(dev, 0x9a, 0x1312, a); if (!r) r = ch341_control_out(dev, 0x9a, 0x0f2c, b); @@ -136,18 +110,19 @@ static int ch341_set_baudrate(struct usb_device *dev, return r; } -static int ch341_set_handshake(struct usb_device *dev, u8 control) +static int ch341_set_handshake(struct usb_device *dev, + struct ch341_private *priv) { - dbg("ch341_set_handshake(0x%02x)", control); - return ch341_control_out(dev, 0xa4, ~control, 0); + dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts); + return ch341_control_out(dev, 0xa4, + ~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0); } -static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) +static int ch341_get_status(struct usb_device *dev) { char *buffer; int r; const unsigned size = 8; - unsigned long flags; dbg("ch341_get_status()"); @@ -159,15 +134,10 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - /* setup the private status if available */ - if (r == 2) { - r = 0; - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; - priv->multi_status_change = 0; - spin_unlock_irqrestore(&priv->lock, flags); - } else - r = -EPROTO; + /* Not having the datasheet for the CH341, we ignore the bytes returned + * from the device. Return error if the device did not respond in time. + */ + r = 0; out: kfree(buffer); return r; @@ -210,7 +180,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) goto out; /* expect 0xff 0xee */ - r = ch341_get_status(dev, priv); + r = ch341_get_status(dev); if (r < 0) goto out; @@ -222,12 +192,12 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - r = ch341_set_handshake(dev, priv->line_control); + r = ch341_set_handshake(dev, priv); if (r < 0) goto out; /* expect 0x9f 0xee */ - r = ch341_get_status(dev, priv); + r = ch341_get_status(dev); out: kfree(buffer); return r; @@ -246,10 +216,9 @@ static int ch341_attach(struct usb_serial *serial) if (!priv) return -ENOMEM; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; + priv->dtr = 1; + priv->rts = 1; r = ch341_configure(serial->dev, priv); if (r < 0) @@ -262,35 +231,6 @@ error: kfree(priv); return r; } -static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) -{ - struct ch341_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int c_cflag; - - dbg("%s - port %d", __func__, port->number); - - /* shutdown our urbs */ - dbg("%s - shutting down urbs", __func__); - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - ch341_set_handshake(port->serial->dev, 0); - } - } - wake_up_interruptible(&priv->delta_msr_wait); -} - - /* open this device, set default parameters */ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) @@ -302,13 +242,14 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("ch341_open()"); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; + priv->dtr = 1; + priv->rts = 1; r = ch341_configure(serial->dev, priv); if (r) goto out; - r = ch341_set_handshake(serial->dev, priv->line_control); + r = ch341_set_handshake(serial->dev, priv); if (r) goto out; @@ -316,16 +257,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, if (r) goto out; - dbg("%s - submitting interrupt urb", __func__); - port->interrupt_in_urb->dev = serial->dev; - r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); - if (r) { - dev_err(&port->dev, "%s - failed submitting interrupt urb," - " error %d\n", __func__, r); - ch341_close(tty, port, NULL); - return -EPROTO; - } - r = usb_serial_generic_open(tty, port, filp); out: return r; @@ -339,194 +270,38 @@ static void ch341_set_termios(struct tty_struct *tty, { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned baud_rate; - unsigned long flags; dbg("ch341_set_termios()"); - if (!tty || !tty->termios) - return; - baud_rate = tty_get_baud_rate(tty); - priv->baud_rate = baud_rate; - - if (baud_rate) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); - ch341_set_baudrate(port->serial->dev, priv); - } else { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); + switch (baud_rate) { + case 2400: + case 4800: + case 9600: + case 19200: + case 38400: + case 115200: + priv->baud_rate = baud_rate; + break; + default: + dbg("Rate %d not supported, using %d", + baud_rate, DEFAULT_BAUD_RATE); + priv->baud_rate = DEFAULT_BAUD_RATE; } - ch341_set_handshake(port->serial->dev, priv->line_control); + ch341_set_baudrate(port->serial->dev, priv); /* Unimplemented: * (cflag & CSIZE) : data bits [5, 8] * (cflag & PARENB) : parity {NONE, EVEN, ODD} * (cflag & CSTOPB) : stop bits [1, 2] */ -} - -static int ch341_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct usb_serial_port *port = tty->driver_data; - struct ch341_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - u8 control; - - spin_lock_irqsave(&priv->lock, flags); - if (set & TIOCM_RTS) - priv->line_control |= CH341_BIT_RTS; - if (set & TIOCM_DTR) - priv->line_control |= CH341_BIT_DTR; - if (clear & TIOCM_RTS) - priv->line_control &= ~CH341_BIT_RTS; - if (clear & TIOCM_DTR) - priv->line_control &= ~CH341_BIT_DTR; - control = priv->line_control; - spin_unlock_irqrestore(&priv->lock, flags); - - return ch341_set_handshake(port->serial->dev, control); -} - -static void ch341_read_int_callback(struct urb *urb) -{ - struct usb_serial_port *port = (struct usb_serial_port *) urb->context; - unsigned char *data = urb->transfer_buffer; - unsigned int actual_length = urb->actual_length; - int status; - - dbg("%s (%d)", __func__, port->number); - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __func__, - urb->status); - goto exit; - } - - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, urb->transfer_buffer); - - if (actual_length >= 4) { - struct ch341_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT; - if ((data[1] & CH341_MULT_STAT)) - priv->multi_status_change = 1; - spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible(&priv->delta_msr_wait); - } - -exit: - status = usb_submit_urb(urb, GFP_ATOMIC); - if (status) - dev_err(&urb->dev->dev, - "%s - usb_submit_urb failed with result %d\n", - __func__, status); -} - -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) -{ - struct ch341_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - u8 prevstatus; - u8 status; - u8 changed; - u8 multi_change = 0; - - spin_lock_irqsave(&priv->lock, flags); - prevstatus = priv->line_status; - priv->multi_status_change = 0; - spin_unlock_irqrestore(&priv->lock, flags); - - while (!multi_change) { - interruptible_sleep_on(&priv->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - spin_lock_irqsave(&priv->lock, flags); - status = priv->line_status; - multi_change = priv->multi_status_change; - spin_unlock_irqrestore(&priv->lock, flags); - - changed = prevstatus ^ status; - - if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) || - ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) || - ((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) || - ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) { - return 0; - } - prevstatus = status; - } - - return 0; -} - -/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/ -static int ch341_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct usb_serial_port *port = tty->driver_data; - dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); - - switch (cmd) { - case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); - return wait_modem_info(port, arg); - - default: - dbg("%s not supported = 0x%04x", __func__, cmd); - break; - } - - return -ENOIOCTLCMD; -} - -static int ch341_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct usb_serial_port *port = tty->driver_data; - struct ch341_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - u8 mcr; - u8 status; - unsigned int result; - - dbg("%s (%d)", __func__, port->number); - - spin_lock_irqsave(&priv->lock, flags); - mcr = priv->line_control; - status = priv->line_status; - spin_unlock_irqrestore(&priv->lock, flags); - - result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0) - | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0) - | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0) - | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0) - | ((status & CH341_BIT_RI) ? TIOCM_RI : 0) - | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0); - - dbg("%s - result = %x", __func__, result); - return result; + /* Copy back the old hardware settings */ + tty_termios_copy_hw(tty->termios, old_termios); + /* And re-encode with the new baud */ + tty_encode_baud_rate(tty, baud_rate, baud_rate); } @@ -564,17 +339,12 @@ static struct usb_serial_driver ch341_device = { .owner = THIS_MODULE, .name = "ch341-uart", }, - .id_table = id_table, - .usb_driver = &ch341_driver, - .num_ports = 1, - .open = ch341_open, - .close = ch341_close, - .ioctl = ch341_ioctl, - .set_termios = ch341_set_termios, - .tiocmget = ch341_tiocmget, - .tiocmset = ch341_tiocmset, - .read_int_callback = ch341_read_int_callback, - .attach = ch341_attach, + .id_table = id_table, + .usb_driver = &ch341_driver, + .num_ports = 1, + .open = ch341_open, + .set_termios = ch341_set_termios, + .attach = ch341_attach, }; static int __init ch341_init(void) -- cgit v0.10.2 From f4c1a8379a6d1ba39ac7b87f75d1352ef05cffff Mon Sep 17 00:00:00 2001 From: Werner Cornelius Date: Fri, 16 Jan 2009 21:02:41 +0100 Subject: USB: usb-serial ch341: support for DTR/RTS/CTS commit 664d5df92e88b6ef091048a802b3750f4e989180 upstream. Fixup of Werner Cornelius patch to the ch341 USB-serial driver, which adds: - support all baudrates, not just a hard-coded set - support for controlling DTR, RTS and CTS Features still missing: - character length other than 8 bits - parity settings - break control I adapted his patch for the new usb_serial API introduced in 2.6.25-git8 by Alan Cox on 22 July 2008. Non-compliance to the new API was a reason for refusing a similar patch from Tollef Fog Heen. Usage example by Tollef Fog Heen : TEMPer USB thermometer based on a patch by: From: Tollef Fog Heen * Implement support for all baud rates rather than just a hard coded set. * Make it possible to control status and control lines * Grab a bunch of #defines from FreeBSD to reduce the number of magic numbers in the file Signed-off-by: Werner Cornelius Signed-off-by: Boris Hajduk Cc: Alan Cox Signed-off-by: Tollef Fog Heen Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index d33d39d..ab4cc27 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -1,5 +1,7 @@ /* * Copyright 2007, Frank A Kingswood + * Copyright 2007, Werner Cornelius + * Copyright 2009, Boris Hajduk * * ch341.c implements a serial port driver for the Winchiphead CH341. * @@ -21,9 +23,39 @@ #include #include -#define DEFAULT_BAUD_RATE 2400 +#define DEFAULT_BAUD_RATE 9600 #define DEFAULT_TIMEOUT 1000 +/* flags for IO-Bits */ +#define CH341_BIT_RTS (1 << 6) +#define CH341_BIT_DTR (1 << 5) + +/******************************/ +/* interrupt pipe definitions */ +/******************************/ +/* always 4 interrupt bytes */ +/* first irq byte normally 0x08 */ +/* second irq byte base 0x7d + below */ +/* third irq byte base 0x94 + below */ +/* fourth irq byte normally 0xee */ + +/* second interrupt byte */ +#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */ + +/* status returned in third interrupt answer byte, inverted in data + from irq */ +#define CH341_BIT_CTS 0x01 +#define CH341_BIT_DSR 0x02 +#define CH341_BIT_RI 0x04 +#define CH341_BIT_DCD 0x08 +#define CH341_BITS_MODEM_STAT 0x0f /* all bits */ + +/*******************************/ +/* baudrate calculation factor */ +/*******************************/ +#define CH341_BAUDBASE_FACTOR 1532620800 +#define CH341_BAUDBASE_DIVMAX 3 + static int debug; static struct usb_device_id id_table [] = { @@ -34,9 +66,12 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); struct ch341_private { - unsigned baud_rate; - u8 dtr; - u8 rts; + spinlock_t lock; /* access lock */ + wait_queue_head_t delta_msr_wait; /* wait queue for modem status */ + unsigned baud_rate; /* set baud rate */ + u8 line_control; /* set line control value RTS/DTR */ + u8 line_status; /* active status of modem control inputs */ + u8 multi_status_change; /* status changed multiple since last call */ }; static int ch341_control_out(struct usb_device *dev, u8 request, @@ -72,37 +107,28 @@ static int ch341_set_baudrate(struct usb_device *dev, { short a, b; int r; + unsigned long factor; + short divisor; dbg("ch341_set_baudrate(%d)", priv->baud_rate); - switch (priv->baud_rate) { - case 2400: - a = 0xd901; - b = 0x0038; - break; - case 4800: - a = 0x6402; - b = 0x001f; - break; - case 9600: - a = 0xb202; - b = 0x0013; - break; - case 19200: - a = 0xd902; - b = 0x000d; - break; - case 38400: - a = 0x6403; - b = 0x000a; - break; - case 115200: - a = 0xcc03; - b = 0x0008; - break; - default: + + if (!priv->baud_rate) return -EINVAL; + factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate); + divisor = CH341_BAUDBASE_DIVMAX; + + while ((factor > 0xfff0) && divisor) { + factor >>= 3; + divisor--; } + if (factor > 0xfff0) + return -EINVAL; + + factor = 0x10000 - factor; + a = (factor & 0xff00) | divisor; + b = factor & 0xff; + r = ch341_control_out(dev, 0x9a, 0x1312, a); if (!r) r = ch341_control_out(dev, 0x9a, 0x0f2c, b); @@ -110,19 +136,18 @@ static int ch341_set_baudrate(struct usb_device *dev, return r; } -static int ch341_set_handshake(struct usb_device *dev, - struct ch341_private *priv) +static int ch341_set_handshake(struct usb_device *dev, u8 control) { - dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts); - return ch341_control_out(dev, 0xa4, - ~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0); + dbg("ch341_set_handshake(0x%02x)", control); + return ch341_control_out(dev, 0xa4, ~control, 0); } -static int ch341_get_status(struct usb_device *dev) +static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) { char *buffer; int r; const unsigned size = 8; + unsigned long flags; dbg("ch341_get_status()"); @@ -134,10 +159,15 @@ static int ch341_get_status(struct usb_device *dev) if (r < 0) goto out; - /* Not having the datasheet for the CH341, we ignore the bytes returned - * from the device. Return error if the device did not respond in time. - */ - r = 0; + /* setup the private status if available */ + if (r == 2) { + r = 0; + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; + priv->multi_status_change = 0; + spin_unlock_irqrestore(&priv->lock, flags); + } else + r = -EPROTO; out: kfree(buffer); return r; @@ -180,7 +210,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) goto out; /* expect 0xff 0xee */ - r = ch341_get_status(dev); + r = ch341_get_status(dev, priv); if (r < 0) goto out; @@ -192,12 +222,12 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - r = ch341_set_handshake(dev, priv); + r = ch341_set_handshake(dev, priv->line_control); if (r < 0) goto out; /* expect 0x9f 0xee */ - r = ch341_get_status(dev); + r = ch341_get_status(dev, priv); out: kfree(buffer); return r; @@ -216,9 +246,10 @@ static int ch341_attach(struct usb_serial *serial) if (!priv) return -ENOMEM; + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->dtr = 1; - priv->rts = 1; + priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(serial->dev, priv); if (r < 0) @@ -231,6 +262,35 @@ error: kfree(priv); return r; } +static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int c_cflag; + + dbg("%s - port %d", __func__, port->number); + + /* shutdown our urbs */ + dbg("%s - shutting down urbs", __func__); + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + usb_kill_urb(port->interrupt_in_urb); + + if (tty) { + c_cflag = tty->termios->c_cflag; + if (c_cflag & HUPCL) { + /* drop DTR and RTS */ + spin_lock_irqsave(&priv->lock, flags); + priv->line_control = 0; + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_handshake(port->serial->dev, 0); + } + } + wake_up_interruptible(&priv->delta_msr_wait); +} + + /* open this device, set default parameters */ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) @@ -242,14 +302,13 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("ch341_open()"); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->dtr = 1; - priv->rts = 1; + priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(serial->dev, priv); if (r) goto out; - r = ch341_set_handshake(serial->dev, priv); + r = ch341_set_handshake(serial->dev, priv->line_control); if (r) goto out; @@ -257,6 +316,16 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, if (r) goto out; + dbg("%s - submitting interrupt urb", __func__); + port->interrupt_in_urb->dev = serial->dev; + r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (r) { + dev_err(&port->dev, "%s - failed submitting interrupt urb," + " error %d\n", __func__, r); + ch341_close(tty, port, NULL); + return -EPROTO; + } + r = usb_serial_generic_open(tty, port, filp); out: return r; @@ -270,38 +339,194 @@ static void ch341_set_termios(struct tty_struct *tty, { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned baud_rate; + unsigned long flags; dbg("ch341_set_termios()"); + if (!tty || !tty->termios) + return; + baud_rate = tty_get_baud_rate(tty); - switch (baud_rate) { - case 2400: - case 4800: - case 9600: - case 19200: - case 38400: - case 115200: - priv->baud_rate = baud_rate; - break; - default: - dbg("Rate %d not supported, using %d", - baud_rate, DEFAULT_BAUD_RATE); - priv->baud_rate = DEFAULT_BAUD_RATE; + priv->baud_rate = baud_rate; + + if (baud_rate) { + spin_lock_irqsave(&priv->lock, flags); + priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_baudrate(port->serial->dev, priv); + } else { + spin_lock_irqsave(&priv->lock, flags); + priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); } - ch341_set_baudrate(port->serial->dev, priv); + ch341_set_handshake(port->serial->dev, priv->line_control); /* Unimplemented: * (cflag & CSIZE) : data bits [5, 8] * (cflag & PARENB) : parity {NONE, EVEN, ODD} * (cflag & CSTOPB) : stop bits [1, 2] */ +} + +static int ch341_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (set & TIOCM_RTS) + priv->line_control |= CH341_BIT_RTS; + if (set & TIOCM_DTR) + priv->line_control |= CH341_BIT_DTR; + if (clear & TIOCM_RTS) + priv->line_control &= ~CH341_BIT_RTS; + if (clear & TIOCM_DTR) + priv->line_control &= ~CH341_BIT_DTR; + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + return ch341_set_handshake(port->serial->dev, control); +} + +static void ch341_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned int actual_length = urb->actual_length; + int status; + + dbg("%s (%d)", __func__, port->number); + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __func__, + urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __func__, + urb->status); + goto exit; + } + + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, urb->transfer_buffer); + + if (actual_length >= 4) { + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT; + if ((data[1] & CH341_MULT_STAT)) + priv->multi_status_change = 1; + spin_unlock_irqrestore(&priv->lock, flags); + wake_up_interruptible(&priv->delta_msr_wait); + } + +exit: + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, status); +} + +static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 prevstatus; + u8 status; + u8 changed; + u8 multi_change = 0; + + spin_lock_irqsave(&priv->lock, flags); + prevstatus = priv->line_status; + priv->multi_status_change = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + while (!multi_change) { + interruptible_sleep_on(&priv->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&priv->lock, flags); + status = priv->line_status; + multi_change = priv->multi_status_change; + spin_unlock_irqrestore(&priv->lock, flags); + + changed = prevstatus ^ status; + + if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) || + ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) || + ((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) || + ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) { + return 0; + } + prevstatus = status; + } + + return 0; +} + +/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/ +static int ch341_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); + + switch (cmd) { + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + return wait_modem_info(port, arg); + + default: + dbg("%s not supported = 0x%04x", __func__, cmd); + break; + } + + return -ENOIOCTLCMD; +} + +static int ch341_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct usb_serial_port *port = tty->driver_data; + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 mcr; + u8 status; + unsigned int result; + + dbg("%s (%d)", __func__, port->number); + + spin_lock_irqsave(&priv->lock, flags); + mcr = priv->line_control; + status = priv->line_status; + spin_unlock_irqrestore(&priv->lock, flags); + + result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0) + | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0) + | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0) + | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0) + | ((status & CH341_BIT_RI) ? TIOCM_RI : 0) + | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0); + + dbg("%s - result = %x", __func__, result); - /* Copy back the old hardware settings */ - tty_termios_copy_hw(tty->termios, old_termios); - /* And re-encode with the new baud */ - tty_encode_baud_rate(tty, baud_rate, baud_rate); + return result; } @@ -339,12 +564,17 @@ static struct usb_serial_driver ch341_device = { .owner = THIS_MODULE, .name = "ch341-uart", }, - .id_table = id_table, - .usb_driver = &ch341_driver, - .num_ports = 1, - .open = ch341_open, - .set_termios = ch341_set_termios, - .attach = ch341_attach, + .id_table = id_table, + .usb_driver = &ch341_driver, + .num_ports = 1, + .open = ch341_open, + .close = ch341_close, + .ioctl = ch341_ioctl, + .set_termios = ch341_set_termios, + .tiocmget = ch341_tiocmget, + .tiocmset = ch341_tiocmset, + .read_int_callback = ch341_read_int_callback, + .attach = ch341_attach, }; static int __init ch341_init(void) -- cgit v0.10.2 From dfc15e8955338fedf5c5d15622c4042c1e4ee332 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 9 Apr 2009 14:59:44 -0400 Subject: usb-storage: fix mistake in Makefile This patch (as1228) fixes a Makefile error introduced when the subdrivers in usb-storage were split out into separate modules. The intention is that when CONFIG_USB_LIBUSUAL is set, libusual.o and usual-tables.o should be combined into a single object file (called usb-libusual). The current Makefile will instead create two separate objects, and the result won't load properly. Signed-off-by: Alan Stern Reported-and-tested-by: Alan Jenkins Reported-and-tested-by: Mike Galbraith Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 5be54c0..ef7e5a8 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -17,7 +17,8 @@ usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ ifeq ($(CONFIG_USB_LIBUSUAL),) usb-storage-objs += usual-tables.o else - obj-$(CONFIG_USB) += libusual.o usual-tables.o + obj-$(CONFIG_USB) += usb-libusual.o + usb-libusual-objs := libusual.o usual-tables.o endif obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o -- cgit v0.10.2 From d45e230bf03850f17394a760dfa003d986a67729 Mon Sep 17 00:00:00 2001 From: "Dr. Greg Wettstein" Date: Sat, 11 Apr 2009 09:12:08 -0500 Subject: USB device codes for Motorola phone. The v950 appears to be a ruggedized version of the Motorola Razor phone. Tethering to the phone to use it in 'phone as modem' mode requires the use of the specialized moto-modem driver which layers over the usb-serial driver. Support for the v950 was added simply adding the device ID's for the phone. Signed-off-by: Dr. Greg Wettstein Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index 2e8e054..b66b71c 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -25,6 +25,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ + { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v0.10.2 From 3444b26afa145148951112534f298bdc554ec789 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Apr 2009 17:36:28 +0000 Subject: USB: add reset endpoint operations Wireless USB endpoint state has a sequence number and a current window and not just a single toggle bit. So allow HCDs to provide a endpoint_reset method and call this or clear the software toggles as required (after a clear halt, set configuration etc.). usb_settoggle() and friends are then HCD internal and are moved into core/hcd.h and all device drivers call usb_reset_endpoint() instead. If the device endpoint state has been reset (with a clear halt) but the host endpoint state has not then subsequent data transfers will not complete. The device will only work again after it is reset or disconnected. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 69b7f8e..689cd27 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1025,6 +1025,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct urb *urb = &sc->work_urb; struct bulk_cs_wrap *bcs; + int endp; int len; int rc; @@ -1033,6 +1034,10 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return; } + endp = usb_pipeendpoint(sc->last_pipe); + if (usb_pipein(sc->last_pipe)) + endp |= USB_DIR_IN; + if (cmd->state == UB_CMDST_CLEAR) { if (urb->status == -EPIPE) { /* @@ -1048,9 +1053,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_sense(sc, cmd); @@ -1065,9 +1068,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_stat(sc, cmd); @@ -1082,9 +1083,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_stat_counted(sc, cmd); @@ -2119,8 +2118,7 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe) del_timer_sync(&timer); usb_kill_urb(&sc->work_urb); - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); return 0; } diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c index ec3c0e5..2b3a055 100644 --- a/drivers/isdn/hisax/st5481_usb.c +++ b/drivers/isdn/hisax/st5481_usb.c @@ -149,14 +149,7 @@ static void usb_ctrl_complete(struct urb *urb) if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) { /* Special case handling for pipe reset */ le16_to_cpus(&ctrl_msg->dr.wIndex); - - /* toggle is reset on clear */ - usb_settoggle(adapter->usb_dev, - ctrl_msg->dr.wIndex & ~USB_DIR_IN, - (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0, - 0); - - + usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex); } if (ctrl_msg->complete) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index d9d974a..add3395 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1461,7 +1461,6 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) return ret; } - usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0); usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f)); pipe = usb_sndctrlpipe(hdw->usb_dev, 0); diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index df3c539..3086090 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -841,7 +841,7 @@ static int proc_resetep(struct dev_state *ps, void __user *arg) ret = checkintf(ps, ret); if (ret) return ret; - usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0); + usb_reset_endpoint(ps->dev, ep); return 0; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 81fa850..42b93da 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1539,6 +1539,32 @@ void usb_hcd_disable_endpoint(struct usb_device *udev, hcd->driver->endpoint_disable(hcd, ep); } +/** + * usb_hcd_reset_endpoint - reset host endpoint state + * @udev: USB device. + * @ep: the endpoint to reset. + * + * Resets any host endpoint state such as the toggle bit, sequence + * number and current window. + */ +void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (hcd->driver->endpoint_reset) + hcd->driver->endpoint_reset(hcd, ep); + else { + int epnum = usb_endpoint_num(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + int is_control = usb_endpoint_xfer_control(&ep->desc); + + usb_settoggle(udev, epnum, is_out, 0); + if (is_control) + usb_settoggle(udev, epnum, !is_out, 0); + } +} + /* Protect against drivers that try to unlink URBs after the device * is gone, by waiting until all unlinks for @udev are finished. * Since we don't currently track URBs by device, simply wait until diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index f750eb1..e7d4479 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -206,6 +206,11 @@ struct hc_driver { void (*endpoint_disable)(struct usb_hcd *hcd, struct usb_host_endpoint *ep); + /* (optional) reset any endpoint state such as sequence number + and current window */ + void (*endpoint_reset)(struct usb_hcd *hcd, + struct usb_host_endpoint *ep); + /* root hub support */ int (*hub_status_data) (struct usb_hcd *hcd, char *buf); int (*hub_control) (struct usb_hcd *hcd, @@ -234,6 +239,8 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); extern void usb_hcd_disable_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); +extern void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep); extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); extern int usb_hcd_get_frame_number(struct usb_device *udev); @@ -279,6 +286,13 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); extern void usb_hc_died(struct usb_hcd *hcd); extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); +/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ +#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) +#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) +#define usb_settoggle(dev, ep, out, bit) \ + ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ + ((bit) << (ep))) + /* -------------------------------------------------------------------------- */ /* Enumeration is only for the hub driver, or HCD virtual root hubs */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 30a0690..b626283 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1002,8 +1002,7 @@ int usb_clear_halt(struct usb_device *dev, int pipe) * the copy in usb-storage, for as long as we need two copies. */ - /* toggle was reset by the clear */ - usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0); + usb_reset_endpoint(dev, endp); return 0; } @@ -1076,6 +1075,30 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, } /** + * usb_reset_endpoint - Reset an endpoint's state. + * @dev: the device whose endpoint is to be reset + * @epaddr: the endpoint's address. Endpoint number for output, + * endpoint number + USB_DIR_IN for input + * + * Resets any host-side endpoint state such as the toggle bit, + * sequence number or current window. + */ +void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr) +{ + unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; + struct usb_host_endpoint *ep; + + if (usb_endpoint_out(epaddr)) + ep = dev->ep_out[epnum]; + else + ep = dev->ep_in[epnum]; + if (ep) + usb_hcd_reset_endpoint(dev, ep); +} +EXPORT_SYMBOL_GPL(usb_reset_endpoint); + + +/** * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled * @intf: pointer to the interface descriptor @@ -1117,7 +1140,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) usb_disable_endpoint(dev, i, true); usb_disable_endpoint(dev, i + USB_DIR_IN, true); } - dev->toggle[0] = dev->toggle[1] = 0; /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) @@ -1154,28 +1176,24 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) * usb_enable_endpoint - Enable an endpoint for USB communications * @dev: the device whose interface is being enabled * @ep: the endpoint - * @reset_toggle: flag to set the endpoint's toggle back to 0 + * @reset_ep: flag to reset the endpoint state * - * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers. + * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers. * For control endpoints, both the input and output sides are handled. */ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, - bool reset_toggle) + bool reset_ep) { int epnum = usb_endpoint_num(&ep->desc); int is_out = usb_endpoint_dir_out(&ep->desc); int is_control = usb_endpoint_xfer_control(&ep->desc); - if (is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 1, 0); + if (reset_ep) + usb_hcd_reset_endpoint(dev, ep); + if (is_out || is_control) dev->ep_out[epnum] = ep; - } - if (!is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 0, 0); + if (!is_out || is_control) dev->ep_in[epnum] = ep; - } ep->enabled = 1; } @@ -1183,18 +1201,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, * usb_enable_interface - Enable all the endpoints for an interface * @dev: the device whose interface is being enabled * @intf: pointer to the interface descriptor - * @reset_toggles: flag to set the endpoints' toggles back to 0 + * @reset_eps: flag to reset the endpoints' state * * Enables all the endpoints for the interface's current altsetting. */ void usb_enable_interface(struct usb_device *dev, - struct usb_interface *intf, bool reset_toggles) + struct usb_interface *intf, bool reset_eps) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) - usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles); + usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps); } /** @@ -1335,7 +1353,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * This issues a standard SET_CONFIGURATION request to the device using * the current configuration. The effect is to reset most USB-related * state in the device, including interface altsettings (reset to zero), - * endpoint halts (cleared), and data toggle (only for bulk and interrupt + * endpoint halts (cleared), and endpoint state (only for bulk and interrupt * endpoints). Other usbcore state is unchanged, including bindings of * usb device drivers to interfaces. * @@ -1343,7 +1361,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * (multi-interface) devices. Instead, the driver for each interface may * use usb_set_interface() on the interfaces it claims. Be careful though; * some devices don't support the SET_INTERFACE request, and others won't - * reset all the interface state (notably data toggles). Resetting the whole + * reset all the interface state (notably endpoint state). Resetting the whole * configuration would affect other drivers' interfaces. * * The caller must own the device lock. @@ -1376,8 +1394,6 @@ int usb_reset_configuration(struct usb_device *dev) if (retval < 0) return retval; - dev->toggle[0] = dev->toggle[1] = 0; - /* re-init hc/hcd interface/endpoint state */ for (i = 0; i < config->desc.bNumInterfaces; i++) { struct usb_interface *intf = config->interface[i]; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index dcfc072..7eee400 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE; dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT; /* ep0 maxpacket comes later, from device descriptor */ - usb_enable_endpoint(dev, &dev->ep0, true); + usb_enable_endpoint(dev, &dev->ep0, false); dev->can_submit = 1; /* Save readable and stable topology id, distinguishing devices diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 49aedb3..fcb3202 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -247,10 +247,8 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) USB_ENDPOINT_HALT, endp, NULL, 0, 3*HZ); - /* reset the endpoint toggle */ if (result >= 0) - usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe), - usb_pipeout(pipe), 0); + usb_reset_endpoint(us->pusb_dev, endp); US_DEBUGP("%s: result = %d\n", __func__, result); return result; diff --git a/include/linux/usb.h b/include/linux/usb.h index c6b2ab4..3aa2cd1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1387,6 +1387,7 @@ extern int usb_string(struct usb_device *dev, int index, extern int usb_clear_halt(struct usb_device *dev, int pipe); extern int usb_reset_configuration(struct usb_device *dev); extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); +extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr); /* this request isn't really synchronous, but it belongs with the others */ extern int usb_driver_set_configuration(struct usb_device *udev, int config); @@ -1491,14 +1492,6 @@ void usb_sg_wait(struct usb_sg_request *io); #define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL) #define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK) -/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ -#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) -#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) -#define usb_settoggle(dev, ep, out, bit) \ - ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ - ((bit) << (ep))) - - static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint) { -- cgit v0.10.2 From 7f0406db5fe4dd3ad3cbd53830239a87d68156fd Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Apr 2009 17:36:29 +0000 Subject: USB: whci-hcd: provide a endpoint_reset method Provide a endpoint_reset method to reset sequence number and current window. This QHead information can only be changed while the qset is not in a schedule. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 958751c..be753f6 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -122,7 +122,8 @@ static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) process_inactive_qtd(whc, qset, td); } - update |= qset_add_qtds(whc, qset); + if (!qset->remove) + update |= qset_add_qtds(whc, qset); done: /* diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index 1569afd..e019a50 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -186,6 +186,28 @@ static void whc_endpoint_disable(struct usb_hcd *usb_hcd, } } +static void whc_endpoint_reset(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + struct whc_qset *qset; + + qset = ep->hcpriv; + if (qset) { + qset->remove = 1; + + if (usb_endpoint_xfer_bulk(&ep->desc) + || usb_endpoint_xfer_control(&ep->desc)) + queue_work(whc->workqueue, &whc->async_work); + else + queue_work(whc->workqueue, &whc->periodic_work); + + qset_reset(whc, qset); + } +} + + static struct hc_driver whc_hc_driver = { .description = "whci-hcd", .product_desc = "Wireless host controller", @@ -200,6 +222,7 @@ static struct hc_driver whc_hc_driver = { .urb_enqueue = whc_urb_enqueue, .urb_dequeue = whc_urb_dequeue, .endpoint_disable = whc_endpoint_disable, + .endpoint_reset = whc_endpoint_reset, .hub_status_data = wusbhc_rh_status_data, .hub_control = wusbhc_rh_control, diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index df8b85f..0c40022 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -128,7 +128,8 @@ static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) process_inactive_qtd(whc, qset, td); } - update |= qset_add_qtds(whc, qset); + if (!qset->remove) + update |= qset_add_qtds(whc, qset); done: /* @@ -353,7 +354,6 @@ void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) qset_delete(whc, qset); } - /** * pzl_init - initialize the periodic zone list * @whc: the WHCI host controller diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index 7be7431..640b38f 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -89,11 +89,16 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) QH_INFO3_TX_RATE_53_3 | QH_INFO3_TX_PWR(0) /* 0 == max power */ ); + + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); } /** * qset_clear - clear fields in a qset so it may be reinserted into a - * schedule + * schedule. + * + * The sequence number and current window are not cleared (see + * qset_reset()). */ void qset_clear(struct whc *whc, struct whc_qset *qset) { @@ -101,9 +106,8 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) qset->remove = 0; qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); - qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start)); + qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; qset->qh.err_count = 0; - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); qset->qh.scratch[0] = 0; qset->qh.scratch[1] = 0; qset->qh.scratch[2] = 0; @@ -114,6 +118,20 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) } /** + * qset_reset - reset endpoint state in a qset. + * + * Clears the sequence number and current window. This qset must not + * be in the ASL or PZL. + */ +void qset_reset(struct whc *whc, struct whc_qset *qset) +{ + wait_for_completion(&qset->remove_complete); + + qset->qh.status &= ~QH_STATUS_SEQ_MASK; + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); +} + +/** * get_qset - get the qset for an async endpoint * * A new qset is created if one does not already exist. diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index d3543a1..24e94d9 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -184,6 +184,7 @@ void qset_free(struct whc *whc, struct whc_qset *qset); struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); void qset_delete(struct whc *whc, struct whc_qset *qset); void qset_clear(struct whc *whc, struct whc_qset *qset); +void qset_reset(struct whc *whc, struct whc_qset *qset); int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, gfp_t mem_flags); void qset_free_std(struct whc *whc, struct whc_std *std); diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h index 51df7e3..794dba0 100644 --- a/drivers/usb/host/whci/whci-hc.h +++ b/drivers/usb/host/whci/whci-hc.h @@ -185,6 +185,7 @@ struct whc_qhead { #define QH_STATUS_FLOW_CTRL (1 << 15) #define QH_STATUS_ICUR(i) ((i) << 5) #define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) +#define QH_STATUS_SEQ_MASK 0x1f /** * usb_pipe_to_qh_type - USB core pipe type to QH transfer type -- cgit v0.10.2 From f720af91ec2c67e9a1abbd935570f4b4e1f0dd54 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Apr 2009 17:36:31 +0000 Subject: USB: whci-hcd: check return value of usb_hcd_link_urb_to_ep() Check the return value of usb_hcd_link_urb_to_ep() and do not add the urb to the ASL/PZL if it returns an error. Omitting the check results in urbs that appear to be submitted successfully but then cannot be unliked (because usb_hcd_check_unlink_urb() returns an error). This can cause khubd (for example) to block forever in usb_kill_urb(). Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index be753f6..c205078 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -255,23 +255,29 @@ int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) spin_lock_irqsave(&whc->lock, flags); + err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (err < 0) { + spin_unlock_irqrestore(&whc->lock, flags); + return err; + } + qset = get_qset(whc, urb, GFP_ATOMIC); if (qset == NULL) err = -ENOMEM; else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); if (!qset->in_sw_list) asl_qset_insert_begin(whc, qset); - } + } else + usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); spin_unlock_irqrestore(&whc->lock, flags); if (!err) queue_work(whc->workqueue, &whc->async_work); - return 0; + return err; } /** diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 0c40022..ff4ef9e 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -283,23 +283,29 @@ int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) spin_lock_irqsave(&whc->lock, flags); + err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (err < 0) { + spin_unlock_irqrestore(&whc->lock, flags); + return err; + } + qset = get_qset(whc, urb, GFP_ATOMIC); if (qset == NULL) err = -ENOMEM; else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); if (!qset->in_sw_list) qset_insert_in_sw_list(whc, qset); - } + } else + usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); spin_unlock_irqrestore(&whc->lock, flags); if (!err) queue_work(whc->workqueue, &whc->periodic_work); - return 0; + return err; } /** -- cgit v0.10.2 From 8db324ec4322a15cf8819b8a7f0eff5aa98b2ff6 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Apr 2009 17:36:33 +0000 Subject: WUSB: disconnect all devices when stopping a WUSB HCD Make sure all WUSB devices are disconnected when stopping a WUSB HCD so that we don't leak the devices' wusb_dev structures. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 386eaa2..63f200e 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -396,7 +396,8 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, /* After a device disconnects, change the GTK (see [WUSB] * section 6.2.11.2). */ - wusbhc_gtk_rekey(wusbhc); + if (wusbhc->active) + wusbhc_gtk_rekey(wusbhc); /* The Wireless USB part has forgotten about the device already; now * khubd's timer will pick up the disconnection and remove the USB @@ -1084,15 +1085,21 @@ error_mmcie_set: * wusbhc_devconnect_stop - stop managing connected devices * @wusbhc: the WUSB HC * - * Removes the Host Info IE and stops the keep alives. - * - * FIXME: should this disconnect all devices? + * Disconnects any devices still connected, stops the keep alives and + * removes the Host Info IE. */ void wusbhc_devconnect_stop(struct wusbhc *wusbhc) { - cancel_delayed_work_sync(&wusbhc->keep_alive_timer); - WARN_ON(!list_empty(&wusbhc->cack_list)); + int i; + mutex_lock(&wusbhc->mutex); + for (i = 0; i < wusbhc->ports_max; i++) { + if (wusbhc->port[i].wusb_dev) + __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]); + } + mutex_unlock(&wusbhc->mutex); + + cancel_delayed_work_sync(&wusbhc->keep_alive_timer); wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr); kfree(wusbhc->wuie_host_info); wusbhc->wuie_host_info = NULL; -- cgit v0.10.2 From 5936ac7f93965931c508e1928d142076998ce65d Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Apr 2009 17:36:32 +0000 Subject: WUSB: fix oops when completing URBs for disconnected devices Fix an oops in wusbhc_giveback_urb() if the wusb device had disconnected while an urb was in progress. Also release the ref count obtained here. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 63f200e..4ac4300 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -267,6 +267,8 @@ static void wusbhc_devconnect_acked_work(struct work_struct *work) mutex_lock(&wusbhc->mutex); wusbhc_devconnect_acked(wusbhc, wusb_dev); mutex_unlock(&wusbhc->mutex); + + wusb_dev_put(wusb_dev); } /* diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index 07c63a3..3638cc6 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -339,13 +339,15 @@ void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) { struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); - if (status == 0) { + if (status == 0 && wusb_dev) { wusb_dev->entry_ts = jiffies; - /* wusbhc_devconnect_acked() can't be called from from + /* wusbhc_devconnect_acked() can't be called from atomic context so defer it to a work queue. */ if (!list_empty(&wusb_dev->cack_node)) queue_work(wusbd, &wusb_dev->devconnect_acked_work); + else + wusb_dev_put(wusb_dev); } usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); -- cgit v0.10.2 From fca10c81d99ff9956179058460dfddc0418f3902 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Apr 2009 17:36:30 +0000 Subject: WUSB: correct format of wusb_chid sysfs file Make the wusb_chid sysfs file match the ABI documentation. Print all zeros if the WUSB host is stopped (instead of an empty file) and end the file with a newline. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index 3638cc6..ee6256f 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -88,33 +88,31 @@ static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show, wusb_trust_timeout_store); /* - * Show & store the current WUSB CHID + * Show the current WUSB CHID. */ static ssize_t wusb_chid_show(struct device *dev, struct device_attribute *attr, char *buf) { struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + const struct wusb_ckhdid *chid; ssize_t result = 0; if (wusbhc->wuie_host_info != NULL) - result += ckhdid_printf(buf, PAGE_SIZE, - &wusbhc->wuie_host_info->CHID); + chid = &wusbhc->wuie_host_info->CHID; + else + chid = &wusb_ckhdid_zero; + + result += ckhdid_printf(buf, PAGE_SIZE, chid); + result += sprintf(buf + result, "\n"); + return result; } /* - * Store a new CHID - * - * This will (FIXME) trigger many changes. - * - * - Send an all zeros CHID and it will stop the controller - * - Send a non-zero CHID and it will start it - * (unless it was started, it will just change the CHID, - * diconnecting all devices first). + * Store a new CHID. * - * So first we scan the MMC we are sent and then we act on it. We - * read it in the same format as we print it, an ASCII string of 16 - * hex bytes. + * - Write an all zeros CHID and it will stop the controller + * - Write a non-zero CHID and it will start it. * * See wusbhc_chid_set() for more info. */ -- cgit v0.10.2 From 3a3236827372a1d3ddfb2ea8abf84ba89e856b44 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:23:34 +0400 Subject: Staging: at76: convert to netdev_ops Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c index 6f6e36a..c8af9a8 100644 --- a/drivers/staging/at76_usb/at76_usb.c +++ b/drivers/staging/at76_usb/at76_usb.c @@ -5259,6 +5259,18 @@ static int at76_alloc_urbs(struct at76_priv *priv, return 0; } +static const struct net_device_ops at76_netdev_ops = { + .ndo_open = at76_open, + .ndo_stop = at76_stop, + .ndo_get_stats = at76_get_stats, + .ndo_start_xmit = at76_tx, + .ndo_tx_timeout = at76_tx_timeout, + .ndo_set_multicast_list = at76_set_multicast, + .ndo_set_mac_address = at76_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + /* Register network device and initialize the hardware */ static int at76_init_new_device(struct at76_priv *priv, struct usb_interface *interface) @@ -5303,21 +5315,15 @@ static int at76_init_new_device(struct at76_priv *priv, priv->scan_mode = SCAN_TYPE_ACTIVE; netdev->flags &= ~IFF_MULTICAST; /* not yet or never */ - netdev->open = at76_open; - netdev->stop = at76_stop; - netdev->get_stats = at76_get_stats; + netdev->netdev_ops = &at76_netdev_ops; netdev->ethtool_ops = &at76_ethtool_ops; /* Add pointers to enable iwspy support. */ priv->wireless_data.spy_data = &priv->spy_data; netdev->wireless_data = &priv->wireless_data; - netdev->hard_start_xmit = at76_tx; - netdev->tx_timeout = at76_tx_timeout; netdev->watchdog_timeo = 2 * HZ; netdev->wireless_handlers = &at76_handler_def; - netdev->set_multicast_list = at76_set_multicast; - netdev->set_mac_address = at76_set_mac_address; dev_alloc_name(netdev, "wlan%d"); ret = register_netdev(priv->netdev); -- cgit v0.10.2 From 0e46ff33d4a698bf0b69fec0eab076d65709e357 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:24:32 +0400 Subject: Staging: epl: convert to netdev_ops Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/epl/VirtualEthernetLinux.c b/drivers/staging/epl/VirtualEthernetLinux.c index 21206c4..077724a 100644 --- a/drivers/staging/epl/VirtualEthernetLinux.c +++ b/drivers/staging/epl/VirtualEthernetLinux.c @@ -284,6 +284,17 @@ static tEplKernel VEthRecvFrame(tEplFrameInfo * pFrameInfo_p) return Ret; } +static const struct net_device_ops epl_netdev_ops = { + .ndo_open = VEthOpen, + .ndo_stop = VEthClose, + .ndo_get_stats = VEthGetStats, + .ndo_start_xmit = VEthXmit, + .ndo_tx_timeout = VEthTimeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p) { tEplKernel Ret = kEplSuccessful; @@ -299,11 +310,7 @@ tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p) goto Exit; } - pVEthNetDevice_g->open = VEthOpen; - pVEthNetDevice_g->stop = VEthClose; - pVEthNetDevice_g->get_stats = VEthGetStats; - pVEthNetDevice_g->hard_start_xmit = VEthXmit; - pVEthNetDevice_g->tx_timeout = VEthTimeout; + pVEthNetDevice_g->netdev_ops = &epl_netdev_ops; pVEthNetDevice_g->watchdog_timeo = EPL_VETH_TX_TIMEOUT; pVEthNetDevice_g->destructor = free_netdev; -- cgit v0.10.2 From fa5a602a62d7dca6d8ea24cfb4aae349dbaabc7b Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:25:33 +0400 Subject: Staging: et131x: convert to netdev_ops Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c index de65972..951c73d 100644 --- a/drivers/staging/et131x/et131x_netdev.c +++ b/drivers/staging/et131x/et131x_netdev.c @@ -112,6 +112,19 @@ void et131x_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp); void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); +static const struct net_device_ops et131x_netdev_ops = { + .ndo_open = et131x_open, + .ndo_stop = et131x_close, + .ndo_start_xmit = et131x_tx, + .ndo_set_multicast_list = et131x_multicast, + .ndo_tx_timeout = et131x_tx_timeout, + .ndo_change_mtu = et131x_change_mtu, + .ndo_set_mac_address = et131x_set_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_get_stats = et131x_stats, + .ndo_do_ioctl = et131x_ioctl, +}; + /** * et131x_device_alloc * @@ -142,16 +155,8 @@ struct net_device *et131x_device_alloc(void) */ //netdev->init = &et131x_init; //netdev->set_config = &et131x_config; - netdev->get_stats = &et131x_stats; - netdev->open = &et131x_open; - netdev->stop = &et131x_close; - netdev->do_ioctl = &et131x_ioctl; - netdev->set_multicast_list = &et131x_multicast; - netdev->hard_start_xmit = &et131x_tx; - netdev->tx_timeout = &et131x_tx_timeout; netdev->watchdog_timeo = ET131X_TX_TIMEOUT; - netdev->change_mtu = &et131x_change_mtu; - netdev->set_mac_address = &et131x_set_mac_addr; + netdev->netdev_ops = &et131x_netdev_ops; //netdev->ethtool_ops = &et131x_ethtool_ops; -- cgit v0.10.2 From 17a23b384f88a336a5230e80dea2013aad03b6f7 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:26:25 +0400 Subject: Staging: otus: convert to netdev_ops Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/otus/usbdrv.c b/drivers/staging/otus/usbdrv.c index 565a839..540cbbb 100644 --- a/drivers/staging/otus/usbdrv.c +++ b/drivers/staging/otus/usbdrv.c @@ -822,6 +822,21 @@ int zfLnxVapXmitFrame(struct sk_buff *skb, struct net_device *dev) return 0; } +static const struct net_device_ops vap_netdev_ops = { + .ndo_open = zfLnxVapOpen, + .ndo_stop = zfLnxVapClose, + .ndo_start_xmit = zfLnxVapXmitFrame, + .ndo_get_stats = usbdrv_get_stats, + .ndo_change_mtu = usbdrv_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef ZM_HOSTAPD_SUPPORT + .ndo_do_ioctl = usbdrv_ioctl, +#else + .ndo_do_ioctl = NULL, +#endif +}; + int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId) { /* Allocate net device structure */ @@ -846,16 +861,7 @@ int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId) vap[vapId].dev->ml_priv = parentDev->ml_priv; //dev->hard_start_xmit = &zd1212_wds_xmit_frame; - vap[vapId].dev->hard_start_xmit = &zfLnxVapXmitFrame; - vap[vapId].dev->open = &zfLnxVapOpen; - vap[vapId].dev->stop = &zfLnxVapClose; - vap[vapId].dev->get_stats = &usbdrv_get_stats; - vap[vapId].dev->change_mtu = &usbdrv_change_mtu; -#ifdef ZM_HOSTAPD_SUPPORT - vap[vapId].dev->do_ioctl = usbdrv_ioctl; -#else - vap[vapId].dev->do_ioctl = NULL; -#endif + vap[vapId].dev->netdev_ops = &vap_netdev_ops; vap[vapId].dev->destructor = free_netdev; vap[vapId].dev->tx_queue_len = 0; @@ -1068,6 +1074,18 @@ void zfLnxUnlinkAllUrbs(struct usbdrv_private *macp) usb_unlink_urb(macp->RegInUrb); } +static const struct net_device_ops otus_netdev_ops = { + .ndo_open = usbdrv_open, + .ndo_stop = usbdrv_close, + .ndo_start_xmit = usbdrv_xmit_frame, + .ndo_change_mtu = usbdrv_change_mtu, + .ndo_get_stats = usbdrv_get_stats, + .ndo_set_multicast_list = usbdrv_set_multi, + .ndo_set_mac_address = usbdrv_set_mac, + .ndo_do_ioctl = usbdrv_ioctl, + .ndo_validate_addr = eth_validate_addr, +}; + u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp) { //unsigned char addr[6]; @@ -1092,14 +1110,7 @@ u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp) dev->wireless_handlers = (struct iw_handler_def *)&p80211wext_handler_def; #endif - dev->open = usbdrv_open; - dev->hard_start_xmit = usbdrv_xmit_frame; - dev->stop = usbdrv_close; - dev->change_mtu = &usbdrv_change_mtu; - dev->get_stats = usbdrv_get_stats; - dev->set_multicast_list = usbdrv_set_multi; - dev->set_mac_address = usbdrv_set_mac; - dev->do_ioctl = usbdrv_ioctl; + dev->netdev_ops = &otus_netdev_ops; dev->flags |= IFF_MULTICAST; -- cgit v0.10.2 From ca7d2dbbadd6c3d6d10e98b94e25cb9566ed3af1 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:27:21 +0400 Subject: Staging: rt2860: convert to netdev_ops Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index cf17bcd..6c4396f 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -722,6 +722,20 @@ err: return (-1); } /* End of rt28xx_open */ +static const struct net_device_ops rt2860_netdev_ops = { + .ndo_open = MainVirtualIF_open, + .ndo_stop = MainVirtualIF_close, + .ndo_do_ioctl = rt28xx_ioctl, + .ndo_get_stats = RT28xx_get_ether_stats, + .ndo_validate_addr = NULL, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef IKANOS_VX_1X0 + .ndo_start_xmit = IKANOS_DataFramesTx, +#else + .ndo_start_xmit = rt28xx_send_packets, +#endif +}; /* Must not be called for mdev and apdev */ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd) @@ -733,11 +747,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p //ether_setup(dev); - dev->hard_start_xmit = rt28xx_send_packets; - -#ifdef IKANOS_VX_1X0 - dev->hard_start_xmit = IKANOS_DataFramesTx; -#endif // IKANOS_VX_1X0 // #ifdef CONFIG_STA_SUPPORT #if WIRELESS_EXT >= 12 @@ -760,12 +769,8 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p #if WIRELESS_EXT < 21 dev->get_wireless_stats = rt28xx_get_wireless_stats; #endif - dev->get_stats = RT28xx_get_ether_stats; - dev->open = MainVirtualIF_open; //rt28xx_open; - dev->stop = MainVirtualIF_close; //rt28xx_close; dev->priv_flags = INT_MAIN; - dev->do_ioctl = rt28xx_ioctl; - dev->validate_addr = NULL; + dev->netdev_ops = &rt2860_netdev_ops; // find available device name for (i = 0; i < 8; i++) { -- cgit v0.10.2 From 4d562f74ec2cd3e957fbc222b0e975554bb5f2c2 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:28:11 +0400 Subject: Staging: rt2870: convert to netdev_ops Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rt2870/rt_main_dev.c b/drivers/staging/rt2870/rt_main_dev.c index 313ecea..48ad411 100644 --- a/drivers/staging/rt2870/rt_main_dev.c +++ b/drivers/staging/rt2870/rt_main_dev.c @@ -855,6 +855,20 @@ err: return (-1); } /* End of rt28xx_open */ +static const struct net_device_ops rt2870_netdev_ops = { + .ndo_open = MainVirtualIF_open, + .ndo_stop = MainVirtualIF_close, + .ndo_do_ioctl = rt28xx_ioctl, + .ndo_get_stats = RT28xx_get_ether_stats, + .ndo_validate_addr = NULL, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef IKANOS_VX_1X0 + .ndo_start_xmit = IKANOS_DataFramesTx, +#else + .ndo_start_xmit = rt28xx_send_packets, +#endif +}; /* Must not be called for mdev and apdev */ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd) @@ -866,12 +880,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p //ether_setup(dev); - dev->hard_start_xmit = rt28xx_send_packets; - -#ifdef IKANOS_VX_1X0 - dev->hard_start_xmit = IKANOS_DataFramesTx; -#endif // IKANOS_VX_1X0 // - // dev->set_multicast_list = ieee80211_set_multicast_list; // dev->change_mtu = ieee80211_change_mtu; #ifdef CONFIG_STA_SUPPORT @@ -895,16 +903,10 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p #if WIRELESS_EXT < 21 dev->get_wireless_stats = rt28xx_get_wireless_stats; #endif - dev->get_stats = RT28xx_get_ether_stats; - dev->open = MainVirtualIF_open; //rt28xx_open; - dev->stop = MainVirtualIF_close; //rt28xx_close; // dev->uninit = ieee80211_if_reinit; // dev->destructor = ieee80211_if_free; dev->priv_flags = INT_MAIN; - dev->do_ioctl = rt28xx_ioctl; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) - dev->validate_addr = NULL; -#endif + dev->netdev_ops = &rt2870_netdev_ops; // find available device name for (i = 0; i < 8; i++) { -- cgit v0.10.2 From d39efb24eaf7cbda4d161b152f1eab82939fb6e9 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:29:18 +0400 Subject: Staging: rt3070: convert to netdev_ops Also remove unused variable. Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rt3070/rt_main_dev.c b/drivers/staging/rt3070/rt_main_dev.c index c000646..81f769c 100644 --- a/drivers/staging/rt3070/rt_main_dev.c +++ b/drivers/staging/rt3070/rt_main_dev.c @@ -436,7 +436,6 @@ static int rt28xx_init(IN struct net_device *net_dev) // OID_SET_HT_PHYMODE SetHT; // WPDMA_GLO_CFG_STRUC GloCfg; UINT32 MacCsr0 = 0; - UINT32 MacValue = 0; #ifdef RT2870 #ifdef INF_AMAZON_SE @@ -849,6 +848,20 @@ err: return (-1); } /* End of rt28xx_open */ +static const struct net_device_ops rt3070_netdev_ops = { + .ndo_open = MainVirtualIF_open, + .ndo_stop = MainVirtualIF_close, + .ndo_do_ioctl = rt28xx_ioctl, + .ndo_get_stats = RT28xx_get_ether_stats, + .ndo_validate_addr = NULL, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef IKANOS_VX_1X0 + .ndo_start_xmit = IKANOS_DataFramesTx, +#else + .ndo_start_xmit = rt28xx_send_packets, +#endif +}; /* Must not be called for mdev and apdev */ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd) @@ -860,12 +873,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p //ether_setup(dev); - dev->hard_start_xmit = rt28xx_send_packets; - -#ifdef IKANOS_VX_1X0 - dev->hard_start_xmit = IKANOS_DataFramesTx; -#endif // IKANOS_VX_1X0 // - // dev->set_multicast_list = ieee80211_set_multicast_list; // dev->change_mtu = ieee80211_change_mtu; #ifdef CONFIG_STA_SUPPORT @@ -889,16 +896,10 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p #if WIRELESS_EXT < 21 dev->get_wireless_stats = rt28xx_get_wireless_stats; #endif - dev->get_stats = RT28xx_get_ether_stats; - dev->open = MainVirtualIF_open; //rt28xx_open; - dev->stop = MainVirtualIF_close; //rt28xx_close; // dev->uninit = ieee80211_if_reinit; // dev->destructor = ieee80211_if_free; dev->priv_flags = INT_MAIN; - dev->do_ioctl = rt28xx_ioctl; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) - dev->validate_addr = NULL; -#endif + dev->netdev_ops = &rt3070_netdev_ops; // find available device name for (i = 0; i < 8; i++) { -- cgit v0.10.2 From 79bd1096bb31445a04b43e470e03d40d700a14a1 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:30:08 +0400 Subject: Staging: slicoss: convert to netdev_ops Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c index 9481563..79b3d1f 100644 --- a/drivers/staging/slicoss/slicoss.c +++ b/drivers/staging/slicoss/slicoss.c @@ -345,6 +345,19 @@ static void slic_init_adapter(struct net_device *netdev, return; } +static const struct net_device_ops slic_netdev_ops = { + .ndo_open = slic_entry_open, + .ndo_stop = slic_entry_halt, + .ndo_start_xmit = slic_xmit_start, + .ndo_do_ioctl = slic_ioctl, + .ndo_set_mac_address = slic_mac_set_address, + .ndo_get_stats = slic_get_stats, + .ndo_set_multicast_list = slic_mcast_set_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static int __devinit slic_entry_probe(struct pci_dev *pcidev, const struct pci_device_id *pci_tbl_entry) { @@ -442,13 +455,7 @@ static int __devinit slic_entry_probe(struct pci_dev *pcidev, netdev->base_addr = (unsigned long)adapter->memorybase; netdev->irq = adapter->irq; - netdev->open = slic_entry_open; - netdev->stop = slic_entry_halt; - netdev->hard_start_xmit = slic_xmit_start; - netdev->do_ioctl = slic_ioctl; - netdev->set_mac_address = slic_mac_set_address; - netdev->get_stats = slic_get_stats; - netdev->set_multicast_list = slic_mcast_set_list; + netdev->netdev_ops = &slic_netdev_ops; slic_debug_adapter_create(adapter); -- cgit v0.10.2 From 7bea36118ee888f0428d22ea6a5560de33e6e739 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:30:46 +0400 Subject: Staging: sxg: convert to netdev_ops Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c index 891f6e3..848d4be 100644 --- a/drivers/staging/sxg/sxg.c +++ b/drivers/staging/sxg/sxg.c @@ -896,6 +896,22 @@ static inline int sxg_read_config(struct adapter_t *adapter) return status; } +static const struct net_device_ops sxg_netdev_ops = { + .ndo_open = sxg_entry_open, + .ndo_stop = sxg_entry_halt, + .ndo_start_xmit = sxg_send_packets, + .ndo_do_ioctl = sxg_ioctl, + .ndo_change_mtu = sxg_change_mtu, + .ndo_get_stats = sxg_get_stats, + .ndo_set_multicast_list = sxg_mcast_set_list, + .ndo_validate_addr = eth_validate_addr, +#if XXXTODO + .ndo_set_mac_address = sxg_mac_set_address, +#else + .ndo_set_mac_address = eth_mac_addr, +#endif +}; + static int sxg_entry_probe(struct pci_dev *pcidev, const struct pci_device_id *pci_tbl_entry) { @@ -1095,16 +1111,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev, netdev->base_addr = (unsigned long)adapter->base_addr; netdev->irq = adapter->irq; - netdev->open = sxg_entry_open; - netdev->stop = sxg_entry_halt; - netdev->hard_start_xmit = sxg_send_packets; - netdev->do_ioctl = sxg_ioctl; - netdev->change_mtu = sxg_change_mtu; -#if XXXTODO - netdev->set_mac_address = sxg_mac_set_address; -#endif - netdev->get_stats = sxg_get_stats; - netdev->set_multicast_list = sxg_mcast_set_list; + netdev->netdev_ops = &sxg_netdev_ops; SET_ETHTOOL_OPS(netdev, &sxg_nic_ethtool_ops); netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; err = sxg_set_interrupt_capability(adapter); -- cgit v0.10.2 From cea96778196dcf7127d6bbbf296c1651848650f2 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:31:28 +0400 Subject: Staging: wlan-ng: convert to netdev_ops Signed-off-by: Alexander Beregalov Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c index b2a606a..393e4df 100644 --- a/drivers/staging/wlan-ng/p80211netdev.c +++ b/drivers/staging/wlan-ng/p80211netdev.c @@ -711,6 +711,20 @@ static int wlan_change_mtu(netdevice_t *dev, int new_mtu) return 0; } +static const struct net_device_ops p80211_netdev_ops = { + .ndo_init = p80211knetdev_init, + .ndo_open = p80211knetdev_open, + .ndo_stop = p80211knetdev_stop, + .ndo_get_stats = p80211knetdev_get_stats, + .ndo_start_xmit = p80211knetdev_hard_start_xmit, + .ndo_set_multicast_list = p80211knetdev_set_multicast_list, + .ndo_do_ioctl = p80211knetdev_do_ioctl, + .ndo_set_mac_address = p80211knetdev_set_mac_address, + .ndo_tx_timeout = p80211knetdev_tx_timeout, + .ndo_change_mtu = wlan_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + /*---------------------------------------------------------------- * wlan_setup * @@ -756,11 +770,7 @@ int wlan_setup(wlandevice_t *wlandev) } else { wlandev->netdev = dev; dev->ml_priv = wlandev; - dev->hard_start_xmit = p80211knetdev_hard_start_xmit; - dev->get_stats = p80211knetdev_get_stats; - dev->init = p80211knetdev_init; - dev->open = p80211knetdev_open; - dev->stop = p80211knetdev_stop; + dev->netdev_ops = &p80211_netdev_ops; mutex_init(&wlandev->ioctl_lock); /* block ioctls until fully initialised. Don't forget to call -- cgit v0.10.2 From a405f43ee336fb890fd967625cc133f9d2e59a9f Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 29 Mar 2009 19:59:13 +0400 Subject: Staging: line6: convert to snd_card_create() Signed-off-by: Alexander Beregalov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/line6/audio.c b/drivers/staging/line6/audio.c index 3aa9468..e2ac8d6 100644 --- a/drivers/staging/line6/audio.c +++ b/drivers/staging/line6/audio.c @@ -27,11 +27,12 @@ int line6_init_audio(struct usb_line6 *line6) { static int dev; struct snd_card *card; + int err; - card = snd_card_new(line6_index[dev], line6_id[dev], THIS_MODULE, 0); - - if (card == NULL) - return -ENOMEM; + err = snd_card_create(line6_index[dev], line6_id[dev], THIS_MODULE, 0, + &card); + if (err < 0) + return err; line6->card = card; -- cgit v0.10.2 From 7cf94029bc0ba99f85a95f19d6823391dffbcf5a Mon Sep 17 00:00:00 2001 From: Daniele Napolitano Date: Wed, 1 Apr 2009 14:53:39 -0700 Subject: Staging: rt2870: add ID for Sitecom WL-315 Signed-off-by: Daniele Napolitano Cc: Arnd Bergmann Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h index 5dd15aa..a42caa3 100644 --- a/drivers/staging/rt2870/rt2870.h +++ b/drivers/staging/rt2870/rt2870.h @@ -96,6 +96,7 @@ {USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */ \ {USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */ \ {USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */ \ + {USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */ \ {USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \ {USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \ {USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \ -- cgit v0.10.2 From 20aa9e9b5465a2566e23d78643735dfae3277dab Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 7 Apr 2009 18:43:43 +0100 Subject: Staging: aten2011: Clean up some tty bits Minor fixes for tty layer stuff in this driver Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c index 85b7054..9c62f78 100644 --- a/drivers/staging/uc2322/aten2011.c +++ b/drivers/staging/uc2322/aten2011.c @@ -603,10 +603,9 @@ static void ATEN2011_bulk_out_data_callback(struct urb *urb) tty = tty_port_tty_get(&ATEN2011_port->port->port); - if (tty && ATEN2011_port->open) { + if (tty && ATEN2011_port->open) /* tell the tty driver that something has changed */ - wake_up_interruptible(&tty->write_wait); - } + tty_wakeup(tty); /* schedule_work(&ATEN2011_port->port->work); */ tty_kref_put(tty); @@ -825,12 +824,6 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port, status = 0; status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data); - /* force low_latency on so that our tty_push actually forces * - * the data through,otherwise it is scheduled, and with * - * high data rates (like with OHCI) data can get lost. */ - - if (tty) - tty->low_latency = 1; /* * Check to see if we've set up our endpoint info yet * (can't set it up in ATEN2011_startup as the structures @@ -1473,22 +1466,7 @@ static void ATEN2011_set_termios(struct tty_struct *tty, cflag = tty->termios->c_cflag; - if (!cflag) { - dbg("%s %s", __func__, "cflag is NULL"); - return; - } - - /* check that they really want us to change something */ - if (old_termios) { - if ((cflag == old_termios->c_cflag) && - (RELEVANT_IFLAG(tty->termios->c_iflag) == - RELEVANT_IFLAG(old_termios->c_iflag))) { - dbg("%s", "Nothing to change"); - return; - } - } - - dbg("%s - clfag %08x iflag %08x", __func__, + dbg("%s - cflag %08x iflag %08x", __func__, tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); if (old_termios) { -- cgit v0.10.2 From 1d8cbcf5d66b1f23f776a2c10ef9574a338cd109 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Mon, 6 Apr 2009 15:12:53 -0700 Subject: Staging: binder: Remove VM_EXEC check. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Many platforms do not support mappings without VM_EXEC. Signed-off-by: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 79e90fe..b62cd2a 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -54,11 +54,7 @@ static int binder_read_proc_proc( #define SZ_4M 0x400000 #endif -#ifndef __i386__ -#define FORBIDDEN_MMAP_FLAGS (VM_WRITE | VM_EXEC) -#else #define FORBIDDEN_MMAP_FLAGS (VM_WRITE) -#endif #define BINDER_SMALL_BUF_SIZE (PAGE_SIZE * 64) -- cgit v0.10.2 From 85e0b0cbbfc17e7f7baa9e76f9a937249108fc52 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Mon, 6 Apr 2009 15:12:54 -0700 Subject: Staging: binder: Don't create two proc entries with the same name if the driver is opened twice in one process. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index b62cd2a..39871da 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -2776,6 +2776,7 @@ static int binder_open(struct inode *nodp, struct file *filp) if (binder_proc_dir_entry_proc) { char strbuf[11]; snprintf(strbuf, sizeof(strbuf), "%u", proc->pid); + remove_proc_entry(strbuf, binder_proc_dir_entry_proc); create_proc_read_entry(strbuf, S_IRUGO, binder_proc_dir_entry_proc, binder_read_proc_proc, proc); } -- cgit v0.10.2 From 4ddfc911e39a01f95ad9765d3b9e6f43e14eeff4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Mon, 6 Apr 2009 15:12:55 -0700 Subject: Staging: binder: mmap fixes. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only allow a binder file pointer to be mmapped once. The buffer management code cannot deal with more then one area. Also remove leftover mutex_unlock if mmap fails. Signed-off-by: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 39871da..761f5d6 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -2694,6 +2694,12 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) } vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE; + if (proc->buffer) { + ret = -EBUSY; + failure_string = "already mapped"; + goto err_already_mapped; + } + area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP); if (area == NULL) { ret = -ENOMEM; @@ -2741,10 +2747,12 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) err_alloc_small_buf_failed: kfree(proc->pages); + proc->pages = NULL; err_alloc_pages_failed: vfree(proc->buffer); + proc->buffer = NULL; err_get_vm_area_failed: - mutex_unlock(&binder_lock); +err_already_mapped: err_bad_arg: printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret); return ret; -- cgit v0.10.2 From ea5c4cc68e2b5f4ec41d666376d3606d4d5c3426 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Mon, 6 Apr 2009 15:12:56 -0700 Subject: Staging: binder: Add more offset validation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Check that datasize is not smaller than one flat_binder_object. Check that offsets are aligned. Check that offsets_size is aligned. Signed-off-by: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 761f5d6..64f95ee 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -1430,10 +1430,19 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread, return_error = BR_FAILED_REPLY; goto err_copy_data_failed; } + if (!IS_ALIGNED(tr->offsets_size, sizeof(size_t))) { + binder_user_error("binder: %d:%d got transaction with " + "invalid offsets size, %zd\n", + proc->pid, thread->pid, tr->offsets_size); + return_error = BR_FAILED_REPLY; + goto err_bad_offset; + } off_end = (void *)offp + tr->offsets_size; for (; offp < off_end; offp++) { struct flat_binder_object *fp; - if (*offp > t->buffer->data_size - sizeof(*fp)) { + if (*offp > t->buffer->data_size - sizeof(*fp) || + t->buffer->data_size < sizeof(*fp) || + !IS_ALIGNED(*offp, sizeof(void *))) { binder_user_error("binder: %d:%d got transaction with " "invalid offset, %zd\n", proc->pid, thread->pid, *offp); @@ -1651,7 +1660,9 @@ binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer off_end = (void *)offp + buffer->offsets_size; for (; offp < off_end; offp++) { struct flat_binder_object *fp; - if (*offp > buffer->data_size - sizeof(*fp)) { + if (*offp > buffer->data_size - sizeof(*fp) || + buffer->data_size < sizeof(*fp) || + !IS_ALIGNED(*offp, sizeof(void *))) { printk(KERN_ERR "binder: transaction release %d bad" "offset %zd, size %zd\n", debug_id, *offp, buffer->data_size); continue; -- cgit v0.10.2 From 282ca175d4c440ec4d74bc622ee497e5b3530ce5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Mon, 6 Apr 2009 15:12:57 -0700 Subject: Staging: binder: Keep a reference to the files_struct while the driver is mmapped MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This prevents breaking fget_light if a single threaded application allows incoming file descriptors (in replies or on nodes). Should also prevent inserting a file in the wrong files_struct if the receving process execs in the middle of a transaction (between task_get_unused_fd_flags and task_fd_install). Signed-off-by: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 64f95ee..09962e8 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -41,6 +41,8 @@ static int binder_last_id; static struct proc_dir_entry *binder_proc_dir_entry_root; static struct proc_dir_entry *binder_proc_dir_entry_proc; static struct hlist_head binder_dead_nodes; +static HLIST_HEAD(binder_release_files_list); +static DEFINE_MUTEX(binder_release_files_lock); static int binder_read_proc_proc( char *page, char **start, off_t off, int count, int *eof, void *data); @@ -241,6 +243,8 @@ struct binder_proc { int pid; struct vm_area_struct *vma; struct task_struct *tsk; + struct files_struct *files; + struct hlist_node release_files_node; void *buffer; size_t user_buffer_offset; @@ -309,9 +313,9 @@ struct binder_transaction { /* * copied from get_unused_fd_flags */ -int task_get_unused_fd_flags(struct task_struct *tsk, int flags) +int task_get_unused_fd_flags(struct binder_proc *proc, int flags) { - struct files_struct *files = get_files_struct(tsk); + struct files_struct *files = proc->files; int fd, error; struct fdtable *fdt; unsigned long rlim_cur; @@ -333,9 +337,9 @@ repeat: * will limit the total number of files that can be opened. */ rlim_cur = 0; - if (lock_task_sighand(tsk, &irqs)) { - rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur; - unlock_task_sighand(tsk, &irqs); + if (lock_task_sighand(proc->tsk, &irqs)) { + rlim_cur = proc->tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur; + unlock_task_sighand(proc->tsk, &irqs); } if (fd >= rlim_cur) goto out; @@ -371,7 +375,6 @@ repeat: out: spin_unlock(&files->file_lock); - put_files_struct(files); return error; } @@ -379,9 +382,9 @@ out: * copied from fd_install */ static void task_fd_install( - struct task_struct *tsk, unsigned int fd, struct file *file) + struct binder_proc *proc, unsigned int fd, struct file *file) { - struct files_struct *files = get_files_struct(tsk); + struct files_struct *files = proc->files; struct fdtable *fdt; if (files == NULL) @@ -392,7 +395,6 @@ static void task_fd_install( BUG_ON(fdt->fd[fd] != NULL); rcu_assign_pointer(fdt->fd[fd], file); spin_unlock(&files->file_lock); - put_files_struct(files); } /* @@ -409,10 +411,10 @@ static void __put_unused_fd(struct files_struct *files, unsigned int fd) /* * copied from sys_close */ -static long task_close_fd(struct task_struct *tsk, unsigned int fd) +static long task_close_fd(struct binder_proc *proc, unsigned int fd) { struct file *filp; - struct files_struct *files = get_files_struct(tsk); + struct files_struct *files = proc->files; struct fdtable *fdt; int retval; @@ -439,12 +441,10 @@ static long task_close_fd(struct task_struct *tsk, unsigned int fd) retval == -ERESTART_RESTARTBLOCK)) retval = -EINTR; - put_files_struct(files); return retval; out_unlock: spin_unlock(&files->file_lock); - put_files_struct(files); return -EBADF; } @@ -1549,13 +1549,13 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread, return_error = BR_FAILED_REPLY; goto err_fget_failed; } - target_fd = task_get_unused_fd_flags(target_proc->tsk, O_CLOEXEC); + target_fd = task_get_unused_fd_flags(target_proc, O_CLOEXEC); if (target_fd < 0) { fput(file); return_error = BR_FAILED_REPLY; goto err_get_unused_fd_failed; } - task_fd_install(target_proc->tsk, target_fd, file); + task_fd_install(target_proc, target_fd, file); if (binder_debug_mask & BINDER_DEBUG_TRANSACTION) printk(KERN_INFO " fd %ld -> %d\n", fp->handle, target_fd); /* TODO: fput? */ @@ -1698,7 +1698,7 @@ binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer if (binder_debug_mask & BINDER_DEBUG_TRANSACTION) printk(KERN_INFO " fd %ld\n", fp->handle); if (failed_at) - task_close_fd(proc->tsk, fp->handle); + task_close_fd(proc, fp->handle); break; default: @@ -2663,6 +2663,34 @@ static void binder_vma_open(struct vm_area_struct *vma) (unsigned long)pgprot_val(vma->vm_page_prot)); dump_stack(); } + +static void binder_release_files(struct work_struct *work) +{ + struct binder_proc *proc; + struct files_struct *files; + do { + mutex_lock(&binder_lock); + mutex_lock(&binder_release_files_lock); + if (!hlist_empty(&binder_release_files_list)) { + proc = hlist_entry(binder_release_files_list.first, + struct binder_proc, release_files_node); + hlist_del_init(&proc->release_files_node); + files = proc->files; + if (files) + proc->files = NULL; + } else { + proc = NULL; + files = NULL; + } + mutex_unlock(&binder_release_files_lock); + mutex_unlock(&binder_lock); + if (files) + put_files_struct(files); + } while (proc); +} + +static DECLARE_WORK(binder_release_files_work, binder_release_files); + static void binder_vma_close(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; @@ -2673,6 +2701,13 @@ static void binder_vma_close(struct vm_area_struct *vma) (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, (unsigned long)pgprot_val(vma->vm_page_prot)); proc->vma = NULL; + mutex_lock(&binder_release_files_lock); + if (proc->files) { + hlist_add_head(&proc->release_files_node, + &binder_release_files_list); + schedule_work(&binder_release_files_work); + } + mutex_unlock(&binder_release_files_lock); } static struct vm_operations_struct binder_vm_ops = { @@ -2751,6 +2786,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) binder_insert_free_buffer(proc, buffer); proc->free_async_space = proc->buffer_size / 2; barrier(); + proc->files = get_files_struct(current); proc->vma = vma; /*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/ @@ -2831,6 +2867,7 @@ static int binder_release(struct inode *nodp, struct file *filp) struct hlist_node *pos; struct binder_transaction *t; struct rb_node *n; + struct files_struct *files; struct binder_proc *proc = filp->private_data; int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count; @@ -2840,6 +2877,14 @@ static int binder_release(struct inode *nodp, struct file *filp) remove_proc_entry(strbuf, binder_proc_dir_entry_proc); } mutex_lock(&binder_lock); + mutex_lock(&binder_release_files_lock); + if (!hlist_unhashed(&proc->release_files_node)) + hlist_del(&proc->release_files_node); + files = proc->files; + if (files) + proc->files = NULL; + mutex_unlock(&binder_release_files_lock); + hlist_del(&proc->proc_node); if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) { if (binder_debug_mask & BINDER_DEBUG_DEAD_BINDER) @@ -2937,6 +2982,8 @@ static int binder_release(struct inode *nodp, struct file *filp) proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count); kfree(proc); + if (files) + put_files_struct(files); return 0; } -- cgit v0.10.2 From 7af7467efa64affc6505375ceac97d68cfb58e94 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Mon, 6 Apr 2009 15:12:58 -0700 Subject: Staging: binder: Cast to uintptr_t instead of size_t when aligning pointers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 09962e8..91a9629 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -246,7 +246,7 @@ struct binder_proc { struct files_struct *files; struct hlist_node release_files_node; void *buffer; - size_t user_buffer_offset; + ptrdiff_t user_buffer_offset; struct list_head buffers; struct rb_root free_buffers; @@ -614,7 +614,8 @@ static int binder_update_page_range(struct binder_proc *proc, int allocate, proc->pid, page_addr); goto err_map_kernel_failed; } - user_page_addr = (size_t)page_addr + proc->user_buffer_offset; + user_page_addr = + (uintptr_t)page_addr + proc->user_buffer_offset; ret = vm_insert_page(vma, user_page_addr, page[0]); if (ret) { printk(KERN_ERR "binder: %d: binder_alloc_buf failed " @@ -635,7 +636,7 @@ free_range: page_addr -= PAGE_SIZE) { page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE]; if (vma) - zap_page_range(vma, (size_t)page_addr + + zap_page_range(vma, (uintptr_t)page_addr + proc->user_buffer_offset, PAGE_SIZE, NULL); err_vm_insert_page_failed: unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE); @@ -716,18 +717,19 @@ static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc, "er %p size %zd\n", proc->pid, size, buffer, buffer_size); has_page_addr = - (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK); + (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK); if (n == NULL) { if (size + sizeof(struct binder_buffer) + 4 >= buffer_size) buffer_size = size; /* no room for other buffers */ else buffer_size = size + sizeof(struct binder_buffer); } - end_page_addr = (void *)PAGE_ALIGN((size_t)buffer->data + buffer_size); + end_page_addr = + (void *)PAGE_ALIGN((uintptr_t)buffer->data + buffer_size); if (end_page_addr > has_page_addr) end_page_addr = has_page_addr; if (binder_update_page_range(proc, 1, - (void *)PAGE_ALIGN((size_t)buffer->data), end_page_addr, NULL)) + (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL)) return NULL; rb_erase(best_fit, &proc->free_buffers); @@ -758,12 +760,12 @@ static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc, static void *buffer_start_page(struct binder_buffer *buffer) { - return (void *)((size_t)buffer & PAGE_MASK); + return (void *)((uintptr_t)buffer & PAGE_MASK); } static void *buffer_end_page(struct binder_buffer *buffer) { - return (void *)(((size_t)(buffer + 1) - 1) & PAGE_MASK); + return (void *)(((uintptr_t)(buffer + 1) - 1) & PAGE_MASK); } static void binder_delete_free_buffer( @@ -841,8 +843,8 @@ static void binder_free_buf( } binder_update_page_range(proc, 0, - (void *)PAGE_ALIGN((size_t)buffer->data), - (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK), + (void *)PAGE_ALIGN((uintptr_t)buffer->data), + (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK), NULL); rb_erase(&buffer->rb_node, &proc->allocated_buffers); buffer->free = 1; @@ -2347,7 +2349,7 @@ retry: tr.data_size = t->buffer->data_size; tr.offsets_size = t->buffer->offsets_size; - tr.data.ptr.buffer = (void *)((void *)t->buffer->data + proc->user_buffer_offset); + tr.data.ptr.buffer = (void *)t->buffer->data + proc->user_buffer_offset; tr.data.ptr.offsets = tr.data.ptr.buffer + ALIGN(t->buffer->data_size, sizeof(void *)); if (put_user(cmd, (uint32_t __user *)ptr)) @@ -2753,7 +2755,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) goto err_get_vm_area_failed; } proc->buffer = area->addr; - proc->user_buffer_offset = vma->vm_start - (size_t)proc->buffer; + proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer; #ifdef CONFIG_CPU_CACHE_VIPT if (cache_is_vipt_aliasing()) { -- cgit v0.10.2 From 0cf24a7dc9123ddf63c413b6d4b38017b19db713 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Mon, 6 Apr 2009 15:12:59 -0700 Subject: Staging: binder: Prevent the wrong thread from adding a transaction to the stack. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a thread is part of a transaction stack, it is only allowed to make another call if it was the target of the top transaction on the stack. Signed-off-by: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 91a9629..b0127a3 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -1343,6 +1343,17 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread, if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) { struct binder_transaction *tmp; tmp = thread->transaction_stack; + if (tmp->to_thread != thread) { + binder_user_error("binder: %d:%d got new " + "transaction with bad transaction stack" + ", transaction %d has target %d:%d\n", + proc->pid, thread->pid, tmp->debug_id, + tmp->to_proc ? tmp->to_proc->pid : 0, + tmp->to_thread ? + tmp->to_thread->pid : 0); + return_error = BR_FAILED_REPLY; + goto err_bad_call_stack; + } while (tmp) { if (tmp->from && tmp->from->proc == target_proc) target_thread = tmp->from; -- cgit v0.10.2 From 861a0dcc397f3e94024cc311086799393ec517df Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Mon, 6 Apr 2009 15:13:00 -0700 Subject: Staging: binder: Defer flush and release operations to avoid deadlocks. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a transaction that contains a file descriptor fails on a later object, the new file descriptor needs to be closed. If this is a binder file descriptor we would deadlock in flush. If there were no other references to the file at this point release would also be called. Signed-off-by: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index b0127a3..299d29d 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -41,8 +41,8 @@ static int binder_last_id; static struct proc_dir_entry *binder_proc_dir_entry_root; static struct proc_dir_entry *binder_proc_dir_entry_proc; static struct hlist_head binder_dead_nodes; -static HLIST_HEAD(binder_release_files_list); -static DEFINE_MUTEX(binder_release_files_lock); +static HLIST_HEAD(binder_deferred_list); +static DEFINE_MUTEX(binder_deferred_lock); static int binder_read_proc_proc( char *page, char **start, off_t off, int count, int *eof, void *data); @@ -234,6 +234,12 @@ struct binder_buffer { uint8_t data[0]; }; +enum { + BINDER_DEFERRED_PUT_FILES = 0x01, + BINDER_DEFERRED_FLUSH = 0x02, + BINDER_DEFERRED_RELEASE = 0x04, +}; + struct binder_proc { struct hlist_node proc_node; struct rb_root threads; @@ -244,7 +250,8 @@ struct binder_proc { struct vm_area_struct *vma; struct task_struct *tsk; struct files_struct *files; - struct hlist_node release_files_node; + struct hlist_node deferred_work_node; + int deferred_work; void *buffer; ptrdiff_t user_buffer_offset; @@ -310,6 +317,8 @@ struct binder_transaction { uid_t sender_euid; }; +static void binder_defer_work(struct binder_proc *proc, int defer); + /* * copied from get_unused_fd_flags */ @@ -2677,33 +2686,6 @@ static void binder_vma_open(struct vm_area_struct *vma) dump_stack(); } -static void binder_release_files(struct work_struct *work) -{ - struct binder_proc *proc; - struct files_struct *files; - do { - mutex_lock(&binder_lock); - mutex_lock(&binder_release_files_lock); - if (!hlist_empty(&binder_release_files_list)) { - proc = hlist_entry(binder_release_files_list.first, - struct binder_proc, release_files_node); - hlist_del_init(&proc->release_files_node); - files = proc->files; - if (files) - proc->files = NULL; - } else { - proc = NULL; - files = NULL; - } - mutex_unlock(&binder_release_files_lock); - mutex_unlock(&binder_lock); - if (files) - put_files_struct(files); - } while (proc); -} - -static DECLARE_WORK(binder_release_files_work, binder_release_files); - static void binder_vma_close(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; @@ -2714,13 +2696,7 @@ static void binder_vma_close(struct vm_area_struct *vma) (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, (unsigned long)pgprot_val(vma->vm_page_prot)); proc->vma = NULL; - mutex_lock(&binder_release_files_lock); - if (proc->files) { - hlist_add_head(&proc->release_files_node, - &binder_release_files_list); - schedule_work(&binder_release_files_work); - } - mutex_unlock(&binder_release_files_lock); + binder_defer_work(proc, BINDER_DEFERRED_PUT_FILES); } static struct vm_operations_struct binder_vm_ops = { @@ -2853,11 +2829,17 @@ static int binder_open(struct inode *nodp, struct file *filp) static int binder_flush(struct file *filp, fl_owner_t id) { - struct rb_node *n; struct binder_proc *proc = filp->private_data; - int wake_count = 0; - mutex_lock(&binder_lock); + binder_defer_work(proc, BINDER_DEFERRED_FLUSH); + + return 0; +} + +static void binder_deferred_flush(struct binder_proc *proc) +{ + struct rb_node *n; + int wake_count = 0; for (n = rb_first(&proc->threads); n != NULL; n = rb_next(n)) { struct binder_thread *thread = rb_entry(n, struct binder_thread, rb_node); thread->looper |= BINDER_LOOPER_STATE_NEED_RETURN; @@ -2867,36 +2849,34 @@ static int binder_flush(struct file *filp, fl_owner_t id) } } wake_up_interruptible_all(&proc->wait); - mutex_unlock(&binder_lock); if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) printk(KERN_INFO "binder_flush: %d woke %d threads\n", proc->pid, wake_count); - - return 0; } static int binder_release(struct inode *nodp, struct file *filp) { - struct hlist_node *pos; - struct binder_transaction *t; - struct rb_node *n; - struct files_struct *files; struct binder_proc *proc = filp->private_data; - int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count; - if (binder_proc_dir_entry_proc) { char strbuf[11]; snprintf(strbuf, sizeof(strbuf), "%u", proc->pid); remove_proc_entry(strbuf, binder_proc_dir_entry_proc); } - mutex_lock(&binder_lock); - mutex_lock(&binder_release_files_lock); - if (!hlist_unhashed(&proc->release_files_node)) - hlist_del(&proc->release_files_node); - files = proc->files; - if (files) - proc->files = NULL; - mutex_unlock(&binder_release_files_lock); + + binder_defer_work(proc, BINDER_DEFERRED_RELEASE); + + return 0; +} + +static void binder_deferred_release(struct binder_proc *proc) +{ + struct hlist_node *pos; + struct binder_transaction *t; + struct rb_node *n; + int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count; + + BUG_ON(proc->vma); + BUG_ON(proc->files); hlist_del(&proc->proc_node); if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) { @@ -2971,7 +2951,6 @@ static int binder_release(struct inode *nodp, struct file *filp) } binder_stats.obj_deleted[BINDER_STAT_PROC]++; - mutex_unlock(&binder_lock); page_count = 0; if (proc->pages) { @@ -2995,9 +2974,57 @@ static int binder_release(struct inode *nodp, struct file *filp) proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count); kfree(proc); - if (files) - put_files_struct(files); - return 0; +} + +static void binder_deferred_func(struct work_struct *work) +{ + struct binder_proc *proc; + struct files_struct *files; + + int defer; + do { + mutex_lock(&binder_lock); + mutex_lock(&binder_deferred_lock); + if (!hlist_empty(&binder_deferred_list)) { + proc = hlist_entry(binder_deferred_list.first, + struct binder_proc, deferred_work_node); + hlist_del_init(&proc->deferred_work_node); + defer = proc->deferred_work; + proc->deferred_work = 0; + } else { + proc = NULL; + defer = 0; + } + mutex_unlock(&binder_deferred_lock); + + files = NULL; + if (defer & BINDER_DEFERRED_PUT_FILES) + if ((files = proc->files)) + proc->files = NULL; + + if (defer & BINDER_DEFERRED_FLUSH) + binder_deferred_flush(proc); + + if (defer & BINDER_DEFERRED_RELEASE) + binder_deferred_release(proc); /* frees proc */ + + mutex_unlock(&binder_lock); + if (files) + put_files_struct(files); + } while (proc); +} +static DECLARE_WORK(binder_deferred_work, binder_deferred_func); + +static void binder_defer_work(struct binder_proc *proc, int defer) +{ + mutex_lock(&binder_deferred_lock); + proc->deferred_work |= defer; + if (hlist_unhashed(&proc->deferred_work_node)) { + hlist_add_head(&proc->deferred_work_node, + &binder_deferred_list); + schedule_work(&binder_deferred_work); + } + mutex_unlock(&binder_deferred_lock); } static char *print_binder_transaction(char *buf, char *end, const char *prefix, struct binder_transaction *t) -- cgit v0.10.2 From d203eea8db0b4acbd19ade1aa025ad9b9e0d8863 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 6 Apr 2009 15:15:55 +0200 Subject: Staging: STLC45XX should depend on GENERIC_HARDIRQS m68k allmodconfig: | drivers/staging/stlc45xx/stlc45xx.c: In function 'stlc45xx_probe': | drivers/staging/stlc45xx/stlc45xx.c:2456: error: implicit declaration of function 'set_irq_type' | make[6]: *** [drivers/staging/stlc45xx/stlc45xx.o] Error 1 Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/stlc45xx/Kconfig b/drivers/staging/stlc45xx/Kconfig index 8d3f46f..947fb75 100644 --- a/drivers/staging/stlc45xx/Kconfig +++ b/drivers/staging/stlc45xx/Kconfig @@ -1,6 +1,6 @@ config STLC45XX tristate "stlc4550/4560 support" - depends on MAC80211 && WLAN_80211 && SPI_MASTER + depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS ---help--- This is a driver for stlc4550 and stlc4560 chipsets. -- cgit v0.10.2 From f7ed550b3ecab4a14f78019ff3e8899add607f92 Mon Sep 17 00:00:00 2001 From: Lior Dotan Date: Wed, 11 Feb 2009 13:35:10 +0200 Subject: Revert Staging: SLICOSS: use gfp_kernel where possible Revert commit 2bb347361e2c19799431f56488a3f64de40a3aa6 This commit has been reported to cause problems: Mar 24 11:50:31 linuxdev kernel: BUG: sleeping function called from invalid context at mm/slub.c:1599 Mar 24 11:50:31 linuxdev kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 3251, name: avahi-daemon Cc: Lior Dotan Cc: Christopher Harrer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c index 79b3d1f..6f5d0bf 100644 --- a/drivers/staging/slicoss/slicoss.c +++ b/drivers/staging/slicoss/slicoss.c @@ -1267,7 +1267,7 @@ static int slic_mcast_add_list(struct adapter *adapter, char *address) } /* Doesn't already exist. Allocate a structure to hold it */ - mcaddr = kmalloc(sizeof(struct mcast_address), GFP_KERNEL); + mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC); if (mcaddr == NULL) return 1; @@ -2291,7 +2291,7 @@ static u32 slic_card_locate(struct adapter *adapter) } if (!physcard) { /* no structure allocated for this physical card yet */ - physcard = kzalloc(sizeof(struct physcard), GFP_KERNEL); + physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC); ASSERT(physcard); physcard->next = slic_global.phys_card; -- cgit v0.10.2 From 288a9a8955cd28bf6a0f48ec821cf9028e96081b Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:18 +0300 Subject: Staging: pohmelfs: Populate dentry cache when receiving the new readdir entry. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c index c9b8540..93a5921 100644 --- a/drivers/staging/pohmelfs/net.c +++ b/drivers/staging/pohmelfs/net.c @@ -450,8 +450,24 @@ static int pohmelfs_readdir_response(struct netfs_state *st) if (err != -EEXIST) goto err_out_put; } else { + struct dentry *dentry, *alias, *pd; + set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state); clear_bit(NETFS_INODE_OWNED, &npi->state); + + pd = d_find_alias(&parent->vfs_inode); + if (pd) { + str.hash = full_name_hash(str.name, str.len); + dentry = d_alloc(pd, &str); + if (dentry) { + alias = d_materialise_unique(dentry, &npi->vfs_inode); + if (alias) + dput(dentry); + } + + dput(dentry); + dput(pd); + } } } out: -- cgit v0.10.2 From f3b8fa701b4bd8ec6d378896ad005f01e8382381 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:19 +0300 Subject: Staging: Pohmelfs: Move parent lock to the place where we really have to send a lookup request to the server. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c index 7a41183..26da75c 100644 --- a/drivers/staging/pohmelfs/dir.c +++ b/drivers/staging/pohmelfs/dir.c @@ -389,11 +389,11 @@ static int pohmelfs_readdir(struct file *file, void *dirent, filldir_t filldir) dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n", __func__, pi->ino, (u64)file->f_pos, (unsigned long)file->private_data); - +#if 0 err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK); if (err) return err; - +#endif err = pohmelfs_sync_remote_dir(pi); if (err) return err; @@ -513,10 +513,6 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct need_lock = pohmelfs_need_lock(parent, lock_type); - err = pohmelfs_data_lock(parent, 0, ~0, lock_type); - if (err) - goto out; - str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0); mutex_lock(&parent->offset_lock); @@ -525,7 +521,7 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct ino = n->ino; mutex_unlock(&parent->offset_lock); - dprintk("%s: 1 ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n", + dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n", __func__, ino, inode, str.name, str.hash, parent->state); if (ino) { @@ -534,7 +530,7 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct goto out; } - dprintk("%s: dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n", + dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n", __func__, dir, parent->ino, str.name, str.len, parent->state, ino); @@ -543,6 +539,10 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct goto out; } + err = pohmelfs_data_lock(parent, 0, ~0, lock_type); + if (err) + goto out; + err = pohmelfs_lookup_single(parent, &str, ino); if (err) goto out; -- cgit v0.10.2 From 86ac7253e81b47808f2702596efdfcbfb1a62372 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:20 +0300 Subject: Staging: Pohmelfs: Disable read lock in pohmelfs_getattr(). Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c index 5bf1650..a19e532 100644 --- a/drivers/staging/pohmelfs/inode.c +++ b/drivers/staging/pohmelfs/inode.c @@ -1171,11 +1171,11 @@ static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct struct inode *inode = dentry->d_inode; struct pohmelfs_inode *pi = POHMELFS_I(inode); int err; - +#if 0 err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK); if (err) return err; - +#endif dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n", __func__, pi->ino, inode->i_mode, inode->i_uid, inode->i_gid, inode->i_size); -- cgit v0.10.2 From b522efdd6f8ab8eaae8c8aa984ab7f06a08bcc8e Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:21 +0300 Subject: Staging: Pohmelfs: Added 'need_lock' variable into debug print. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c index 26da75c..c99d91b 100644 --- a/drivers/staging/pohmelfs/dir.c +++ b/drivers/staging/pohmelfs/dir.c @@ -521,8 +521,8 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct ino = n->ino; mutex_unlock(&parent->offset_lock); - dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n", - __func__, ino, inode, str.name, str.hash, parent->state); + dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n", + __func__, ino, inode, str.name, str.hash, parent->state, need_lock); if (ino) { inode = ilookup(dir->i_sb, ino); -- cgit v0.10.2 From 872dc5e500cc25e3c35d83510dfbd6fb8d78221b Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:22 +0300 Subject: Staging: Pohmelfs: Set NETFS_INODE_REMOTE_SYNCED and clear NETFS_INODE_OWNED bits in the root inode. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c index a19e532..00570d9 100644 --- a/drivers/staging/pohmelfs/inode.c +++ b/drivers/staging/pohmelfs/inode.c @@ -1845,6 +1845,8 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent) err = PTR_ERR(npi); goto err_out_crypto_exit; } + set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state); + clear_bit(NETFS_INODE_OWNED, &npi->state); root = &npi->vfs_inode; -- cgit v0.10.2 From e504342448375ffd73dec2b540a5aaf5da6f8439 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:23 +0300 Subject: Staging: Pohmelfs: Extend remount option. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c index 00570d9..3fef09f 100644 --- a/drivers/staging/pohmelfs/inode.c +++ b/drivers/staging/pohmelfs/inode.c @@ -1169,16 +1169,17 @@ err_out_put: static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) { struct inode *inode = dentry->d_inode; +#if 0 struct pohmelfs_inode *pi = POHMELFS_I(inode); int err; -#if 0 + err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK); if (err) return err; -#endif dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n", __func__, pi->ino, inode->i_mode, inode->i_uid, inode->i_gid, inode->i_size); +#endif generic_fillattr(inode, stat); return 0; @@ -1346,12 +1347,6 @@ static void pohmelfs_put_super(struct super_block *sb) pohmelfs_ftrans_exit(); } -static int pohmelfs_remount(struct super_block *sb, int *flags, char *data) -{ - *flags |= MS_RDONLY; - return 0; -} - static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf) { struct super_block *sb = dentry->d_sb; @@ -1394,42 +1389,33 @@ static int pohmelfs_show_options(struct seq_file *seq, struct vfsmount *vfs) return 0; } -static const struct super_operations pohmelfs_sb_ops = { - .alloc_inode = pohmelfs_alloc_inode, - .destroy_inode = pohmelfs_destroy_inode, - .drop_inode = pohmelfs_drop_inode, - .write_inode = pohmelfs_write_inode, - .put_super = pohmelfs_put_super, - .remount_fs = pohmelfs_remount, - .statfs = pohmelfs_statfs, - .show_options = pohmelfs_show_options, -}; - enum { pohmelfs_opt_idx, + pohmelfs_opt_crypto_thread_num, + pohmelfs_opt_trans_max_pages, + pohmelfs_opt_crypto_fail_unsupported, + + /* Remountable options */ pohmelfs_opt_trans_scan_timeout, pohmelfs_opt_drop_scan_timeout, pohmelfs_opt_wait_on_page_timeout, pohmelfs_opt_trans_retries, - pohmelfs_opt_crypto_thread_num, - pohmelfs_opt_trans_max_pages, - pohmelfs_opt_crypto_fail_unsupported, pohmelfs_opt_mcache_timeout, }; static struct match_token pohmelfs_tokens[] = { {pohmelfs_opt_idx, "idx=%u"}, + {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"}, + {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"}, + {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"}, {pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"}, {pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"}, {pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"}, {pohmelfs_opt_trans_retries, "trans_retries=%u"}, - {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"}, - {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"}, - {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"}, {pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"}, }; -static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb) +static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount) { char *p; substring_t args[MAX_OPT_ARGS]; @@ -1449,6 +1435,9 @@ static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb) if (err) return err; + if (remount && token <= pohmelfs_opt_crypto_fail_unsupported) + continue; + switch (token) { case pohmelfs_opt_idx: psb->idx = option; @@ -1485,6 +1474,25 @@ static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb) return 0; } +static int pohmelfs_remount(struct super_block *sb, int *flags, char *data) +{ + int err; + struct pohmelfs_sb *psb = POHMELFS_SB(sb); + unsigned long old_sb_flags = sb->s_flags; + + err = pohmelfs_parse_options(data, psb, 1); + if (err) + goto err_out_restore; + + if (!(*flags & MS_RDONLY)) + sb->s_flags &= ~MS_RDONLY; + return 0; + +err_out_restore: + sb->s_flags = old_sb_flags; + return err; +} + static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count) { struct inode *inode = &pi->vfs_inode; @@ -1753,6 +1761,17 @@ err_out_exit: return err; } +static const struct super_operations pohmelfs_sb_ops = { + .alloc_inode = pohmelfs_alloc_inode, + .destroy_inode = pohmelfs_destroy_inode, + .drop_inode = pohmelfs_drop_inode, + .write_inode = pohmelfs_write_inode, + .put_super = pohmelfs_put_super, + .remount_fs = pohmelfs_remount, + .statfs = pohmelfs_statfs, + .show_options = pohmelfs_show_options, +}; + /* * Allocate private superblock and create root dir. */ @@ -1816,7 +1835,7 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent) mutex_init(&psb->state_lock); INIT_LIST_HEAD(&psb->state_list); - err = pohmelfs_parse_options((char *) data, psb); + err = pohmelfs_parse_options((char *) data, psb, 0); if (err) goto err_out_free_sb; -- cgit v0.10.2 From cee9bb2ebdc1697f9be7ee5bdd6867daaa712179 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:24 +0300 Subject: Staging: Pohmelfs: Sync fs before killing it, since dentry cache is shrunk before writeback is invoked via generic_shutdown_super() Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c index 3fef09f..af99f66 100644 --- a/drivers/staging/pohmelfs/inode.c +++ b/drivers/staging/pohmelfs/inode.c @@ -1908,11 +1908,29 @@ static int pohmelfs_get_sb(struct file_system_type *fs_type, mnt); } +/* + * We need this to sync all inodes earlier, since when writeback + * is invoked from the umount/mntput path dcache is already shrunk, + * see generic_shutdown_super(), and no inodes can access the path. + */ +static void pohmelfs_kill_super(struct super_block *sb) +{ + struct writeback_control wbc = { + .sync_mode = WB_SYNC_ALL, + .range_start = 0, + .range_end = LLONG_MAX, + .nr_to_write = LONG_MAX, + }; + generic_sync_sb_inodes(sb, &wbc); + + kill_anon_super(sb); +} + static struct file_system_type pohmel_fs_type = { .owner = THIS_MODULE, .name = "pohmel", .get_sb = pohmelfs_get_sb, - .kill_sb = kill_anon_super, + .kill_sb = pohmelfs_kill_super, }; /* -- cgit v0.10.2 From d1ec64409bf6fed877d0e55e23587b2b6f5d7d58 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:25 +0300 Subject: Staging: Pohmelfs: Reduce debugging noise about non-existing objects. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c index c99d91b..10d21a4 100644 --- a/drivers/staging/pohmelfs/dir.c +++ b/drivers/staging/pohmelfs/dir.c @@ -557,10 +557,10 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct if (ino) { inode = ilookup(dir->i_sb, ino); - printk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n", + dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n", __func__, ino, inode, str.name, str.hash); if (!inode) { - printk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n", + dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n", __func__, ino, str.name, str.hash); //return NULL; return ERR_PTR(-EACCES); -- cgit v0.10.2 From b82ba780a769a2735c86b5197457972a7df0af08 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:26 +0300 Subject: Staging: Pohmelfs: Use wait_on_page_timeout when waiting for remote directory sync instead of hardcoded 25 seconds. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c index 10d21a4..b579984 100644 --- a/drivers/staging/pohmelfs/dir.c +++ b/drivers/staging/pohmelfs/dir.c @@ -328,7 +328,7 @@ static int pohmelfs_sync_remote_dir(struct pohmelfs_inode *pi) { struct inode *inode = &pi->vfs_inode; struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - long ret = msecs_to_jiffies(25000); + long ret = psb->wait_on_page_timeout; int err; dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n", -- cgit v0.10.2 From 50e4babfb0c36f1665ffcdc9a1826021aedb173f Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:27 +0300 Subject: Staging: Pohmelfs: Drop ftrans debugging code. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c index af99f66..a12fcc6 100644 --- a/drivers/staging/pohmelfs/inode.c +++ b/drivers/staging/pohmelfs/inode.c @@ -1343,8 +1343,6 @@ static void pohmelfs_put_super(struct super_block *sb) kfree(psb); sb->s_fs_info = NULL; - - pohmelfs_ftrans_exit(); } static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf) @@ -1783,8 +1781,6 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent) struct pohmelfs_inode *npi; struct qstr str; - pohmelfs_ftrans_init(); - psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL); if (!psb) goto err_out_exit; diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c index 93a5921..11ecac0 100644 --- a/drivers/staging/pohmelfs/net.c +++ b/drivers/staging/pohmelfs/net.c @@ -26,55 +26,6 @@ #include "netfs.h" -static int pohmelfs_ftrans_size = 10240; -static u32 *pohmelfs_ftrans; - -int pohmelfs_ftrans_init(void) -{ - pohmelfs_ftrans = vmalloc(pohmelfs_ftrans_size * 4); - if (!pohmelfs_ftrans) - return -ENOMEM; - - return 0; -} - -void pohmelfs_ftrans_exit(void) -{ - vfree(pohmelfs_ftrans); -} - -void pohmelfs_ftrans_clean(u64 id) -{ - if (pohmelfs_ftrans) { - u32 i = id & 0xffffffff; - int idx = i % pohmelfs_ftrans_size; - - pohmelfs_ftrans[idx] = 0; - } -} - -void pohmelfs_ftrans_update(u64 id) -{ - if (pohmelfs_ftrans) { - u32 i = id & 0xffffffff; - int idx = i % pohmelfs_ftrans_size; - - pohmelfs_ftrans[idx] = i; - } -} - -int pohmelfs_ftrans_check(u64 id) -{ - if (pohmelfs_ftrans) { - u32 i = id & 0xffffffff; - int idx = i % pohmelfs_ftrans_size; - - return (pohmelfs_ftrans[idx] == i); - } - - return -1; -} - /* * Async machinery lives here. * All commands being sent to server do _not_ require sync reply, @@ -654,15 +605,12 @@ static int pohmelfs_transaction_response(struct netfs_state *st) if (dst) { netfs_trans_remove_nolock(dst, st); t = dst->trans; - - pohmelfs_ftrans_update(cmd->start); } mutex_unlock(&st->trans_lock); if (!t) { - int check = pohmelfs_ftrans_check(cmd->start); - printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u, double: %d.\n", - __func__, cmd->start, cmd->id, cmd->size, cmd->ext, check); + printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n", + __func__, cmd->start, cmd->id, cmd->size, cmd->ext); err = -EINVAL; goto out; } diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h index 2ff21ae..59f81cb 100644 --- a/drivers/staging/pohmelfs/netfs.h +++ b/drivers/staging/pohmelfs/netfs.h @@ -921,12 +921,6 @@ static inline void pohmelfs_mcache_put(struct pohmelfs_sb *psb, pohmelfs_mcache_free(psb, m); } -int pohmelfs_ftrans_init(void); -void pohmelfs_ftrans_exit(void); -void pohmelfs_ftrans_update(u64 id); -int pohmelfs_ftrans_check(u64 id); -void pohmelfs_ftrans_clean(u64 id); - #endif /* __KERNEL__*/ #endif /* __NETFS_H */ diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c index bcb5942..b89f9f3 100644 --- a/drivers/staging/pohmelfs/trans.c +++ b/drivers/staging/pohmelfs/trans.c @@ -501,8 +501,6 @@ int netfs_trans_finish(struct netfs_trans *t, struct pohmelfs_sb *psb) t->gen = atomic_inc_return(&psb->trans_gen); - pohmelfs_ftrans_clean(t->gen); - cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) + t->attached_size + t->attached_pages * sizeof(struct netfs_cmd); cmd->cmd = NETFS_TRANS; -- cgit v0.10.2 From f2739de19176009b14475207d5418cd79e7f0ba3 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:28 +0300 Subject: Staging: Pohmelfs: Added ->show_stats() callback. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c index a12fcc6..b2eaf90 100644 --- a/drivers/staging/pohmelfs/inode.c +++ b/drivers/staging/pohmelfs/inode.c @@ -1759,6 +1759,45 @@ err_out_exit: return err; } +static int pohmelfs_show_stats(struct seq_file *m, struct vfsmount *mnt) +{ + struct netfs_state *st; + struct pohmelfs_ctl *ctl; + struct pohmelfs_sb *psb = POHMELFS_SB(mnt->mnt_sb); + struct pohmelfs_config *c; + + mutex_lock(&psb->state_lock); + + seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n"); + + list_for_each_entry(c, &psb->state_list, config_entry) { + st = &c->state; + ctl = &st->ctl; + + seq_printf(m, "%u ", ctl->idx); + if (ctl->addr.sa_family == AF_INET) { + struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr; + //seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port)); + seq_printf(m, "%u.%u.%u.%u:%u", NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port)); + } else if (ctl->addr.sa_family == AF_INET6) { + struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr; + seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port)); + } else { + unsigned int i; + for (i=0; iaddrlen; ++i) + seq_printf(m, "%02x.", ctl->addr.addr[i]); + } + + seq_printf(m, " %u %u %d %u %x\n", + ctl->type, ctl->proto, + st->socket != NULL, + ctl->prio, ctl->perm); + } + mutex_unlock(&psb->state_lock); + + return 0; +} + static const struct super_operations pohmelfs_sb_ops = { .alloc_inode = pohmelfs_alloc_inode, .destroy_inode = pohmelfs_destroy_inode, @@ -1768,6 +1807,7 @@ static const struct super_operations pohmelfs_sb_ops = { .remount_fs = pohmelfs_remount, .statfs = pohmelfs_statfs, .show_options = pohmelfs_show_options, + .show_stats = pohmelfs_show_stats, }; /* diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h index 59f81cb..7700e2b 100644 --- a/drivers/staging/pohmelfs/netfs.h +++ b/drivers/staging/pohmelfs/netfs.h @@ -116,16 +116,20 @@ struct pohmelfs_crypto unsigned char data[0]; /* Algorithm string, key and IV */ }; +#define POHMELFS_IO_PERM_READ (1<<0) +#define POHMELFS_IO_PERM_WRITE (1<<1) + /* * Configuration command used to create table of different remote servers. */ struct pohmelfs_ctl { - unsigned int idx; /* Config index */ - unsigned int type; /* Socket type */ - unsigned int proto; /* Socket protocol */ - unsigned int addrlen; /* Size of the address */ - unsigned short unused; /* Align structure by 4 bytes */ + __u32 idx; /* Config index */ + __u32 type; /* Socket type */ + __u32 proto; /* Socket protocol */ + __u16 addrlen; /* Size of the address */ + __u16 perm; /* IO permission */ + __u16 prio; /* IO priority */ struct saddr addr; /* Remote server address */ }; -- cgit v0.10.2 From e0ca87391694dfacd01465d5c01c579c3b8b63e0 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:29 +0300 Subject: Staging: Pohmelfs: Added IO permissions and priorities. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt index 6d6db60..dcf8335 100644 --- a/Documentation/filesystems/pohmelfs/design_notes.txt +++ b/Documentation/filesystems/pohmelfs/design_notes.txt @@ -56,9 +56,10 @@ workloads and can fully utilize the bandwidth to the servers when doing bulk data transfers. POHMELFS clients operate with a working set of servers and are capable of balancing read-only -operations (like lookups or directory listings) between them. +operations (like lookups or directory listings) between them according to IO priorities. Administrators can add or remove servers from the set at run-time via special commands (described -in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers. +in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected +with write permission turned on. IO priority and permissions can be changed in run-time. POHMELFS is capable of full data channel encryption and/or strong crypto hashing. One can select any kernel supported cipher, encryption mode, hash type and operation mode diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt index 4e3d501..db2e413 100644 --- a/Documentation/filesystems/pohmelfs/info.txt +++ b/Documentation/filesystems/pohmelfs/info.txt @@ -1,6 +1,8 @@ POHMELFS usage information. -Mount options: +Mount options. +All but index, number of crypto threads and maximum IO size can changed via remount. + idx=%u Each mountpoint is associated with a special index via this option. Administrator can add or remove servers from the given index, so all mounts, @@ -52,16 +54,27 @@ mcache_timeout=%u Usage examples. -Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx +Add server server1.net:1025 into the working set with index $idx with appropriate hash algorithm and key file and cipher algorithm, mode and key file: -$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key +$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key Mount filesystem with given index $idx to /mnt mountpoint. Client will connect to all servers specified in the working set via previous command: mount -t pohmel -o idx=$idx q /mnt -One can add or remove servers from working set after mounting too. +Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw): +$cfg A modify -a server1.net -p 1025 -i $idx -I 1 + +Change IO priority to 123 (node with the highest priority gets read requests). +$cfg A modify -a server1.net -p 1025 -i $idx -P 123 +One can check currect status of all connections in the mountstats file: +# cat /proc/$PID/mountstats +... +device none mounted on /mnt with fstype pohmel +idx addr(:port) socket_type protocol active priority permissions +0 server1.net:1026 1 6 1 250 1 +0 server2.net:1025 1 6 1 123 3 Server installation. diff --git a/drivers/staging/pohmelfs/config.c b/drivers/staging/pohmelfs/config.c index 3e67da9..a6eaa42 100644 --- a/drivers/staging/pohmelfs/config.c +++ b/drivers/staging/pohmelfs/config.c @@ -81,6 +81,45 @@ static struct pohmelfs_config_group *pohmelfs_find_create_config_group(unsigned return g; } +static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst) +{ + struct pohmelfs_config *tmp; + + INIT_LIST_HEAD(&dst->config_entry); + + list_for_each_entry(tmp, &psb->state_list, config_entry) { + if (dst->state.ctl.prio > tmp->state.ctl.prio) + list_add_tail(&dst->config_entry, &tmp->config_entry); + } + if (list_empty(&dst->config_entry)) + list_add_tail(&dst->config_entry, &psb->state_list); +} + +static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb, + struct pohmelfs_config *dst, struct pohmelfs_config *new) +{ + if ((dst->state.ctl.prio == new->state.ctl.prio) && + (dst->state.ctl.perm == new->state.ctl.perm)) + return 0; + + dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n", + __func__, dst->state.ctl.prio, dst->state.ctl.perm, + new->state.ctl.prio, new->state.ctl.perm); + dst->state.ctl.prio = new->state.ctl.prio; + dst->state.ctl.perm = new->state.ctl.perm; + + list_del_init(&dst->config_entry); + pohmelfs_insert_config_entry(psb, dst); + return 0; +} + +/* + * pohmelfs_copy_config() is used to copy new state configs from the + * config group (controlled by the netlink messages) into the superblock. + * This happens either at startup time where no transactions can access + * the list of the configs (and thus list of the network states), or at + * run-time, where it is protected by the psb->state_lock. + */ int pohmelfs_copy_config(struct pohmelfs_sb *psb) { struct pohmelfs_config_group *g; @@ -103,7 +142,9 @@ int pohmelfs_copy_config(struct pohmelfs_sb *psb) err = 0; list_for_each_entry(dst, &psb->state_list, config_entry) { if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) { - err = -EEXIST; + err = pohmelfs_move_config_entry(psb, dst, c); + if (!err) + err = -EEXIST; break; } } @@ -119,7 +160,7 @@ int pohmelfs_copy_config(struct pohmelfs_sb *psb) memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl)); - list_add_tail(&dst->config_entry, &psb->state_list); + pohmelfs_insert_config_entry(psb, dst); err = pohmelfs_state_init_one(psb, dst); if (err) { @@ -248,6 +289,13 @@ out_unlock: return err; } +static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new) +{ + old->perm = new->perm; + old->prio = new->prio; + return 0; +} + static int pohmelfs_cn_ctl(struct cn_msg *msg, int action) { struct pohmelfs_config_group *g; @@ -278,6 +326,9 @@ static int pohmelfs_cn_ctl(struct cn_msg *msg, int action) g->num_entry--; kfree(c); goto out_unlock; + } else if (action == POHMELFS_FLAGS_MODIFY) { + err = pohmelfs_modify_config(sc, ctl); + goto out_unlock; } else { err = -EEXIST; goto out_unlock; @@ -296,6 +347,7 @@ static int pohmelfs_cn_ctl(struct cn_msg *msg, int action) } memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl)); g->num_entry++; + list_add_tail(&c->config_entry, &g->config_list); out_unlock: @@ -401,10 +453,9 @@ static void pohmelfs_cn_callback(void *data) switch (msg->flags) { case POHMELFS_FLAGS_ADD: - err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_ADD); - break; case POHMELFS_FLAGS_DEL: - err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_DEL); + case POHMELFS_FLAGS_MODIFY: + err = pohmelfs_cn_ctl(msg, msg->flags); break; case POHMELFS_FLAGS_SHOW: err = pohmelfs_cn_disp(msg); diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h index 7700e2b..c78cfcb 100644 --- a/drivers/staging/pohmelfs/netfs.h +++ b/drivers/staging/pohmelfs/netfs.h @@ -87,6 +87,7 @@ enum { POHMELFS_FLAGS_DEL, /* Network state control message for DEL */ POHMELFS_FLAGS_SHOW, /* Network state control message for SHOW */ POHMELFS_FLAGS_CRYPTO, /* Crypto data control message */ + POHMELFS_FLAGS_MODIFY, /* Network state modification message */ }; /* diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c index b89f9f3..168fc89 100644 --- a/drivers/staging/pohmelfs/trans.c +++ b/drivers/staging/pohmelfs/trans.c @@ -456,34 +456,22 @@ int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb) __func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state); #endif mutex_lock(&psb->state_lock); - - if ((t->flags & NETFS_TRANS_SINGLE_DST) && psb->active_state) { - st = &psb->active_state->state; - - err = -EPIPE; - if (netfs_state_poll(st) & POLLOUT) { - err = netfs_trans_push_dst(t, st); - if (!err) { - err = netfs_trans_send(t, st); - if (err) { - netfs_trans_drop_last(t, st); - } else { - pohmelfs_switch_active(psb); - goto out; - } - } - } - pohmelfs_switch_active(psb); - } - list_for_each_entry(c, &psb->state_list, config_entry) { st = &c->state; + if (t->flags & NETFS_TRANS_SINGLE_DST) { + if (!(st->ctl.perm & POHMELFS_IO_PERM_READ)) + continue; + } else { + if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE)) + continue; + } + err = netfs_trans_push(t, st); if (!err && (t->flags & NETFS_TRANS_SINGLE_DST)) break; } -out: + mutex_unlock(&psb->state_lock); #if 0 dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n", -- cgit v0.10.2 From d43f3612818b13f44e12bfc2ad75b4b46628b3da Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 27 Mar 2009 15:04:30 +0300 Subject: Staging: Pohmelfs: Add load balancing between network states with the same priority. Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/pohmelfs/lock.c b/drivers/staging/pohmelfs/lock.c index ad4a185..22fef18 100644 --- a/drivers/staging/pohmelfs/lock.c +++ b/drivers/staging/pohmelfs/lock.c @@ -41,7 +41,8 @@ static int pohmelfs_send_lock_trans(struct pohmelfs_inode *pi, path_len = err; err = -ENOMEM; - t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, 0, 0); + t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, + NETFS_TRANS_SINGLE_DST, 0); if (!t) goto err_out_exit; diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c index 168fc89..fef5f9b 100644 --- a/drivers/staging/pohmelfs/trans.c +++ b/drivers/staging/pohmelfs/trans.c @@ -467,6 +467,9 @@ int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb) continue; } + if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio)) + st = &psb->active_state->state; + err = netfs_trans_push(t, st); if (!err && (t->flags & NETFS_TRANS_SINGLE_DST)) break; -- cgit v0.10.2 From 1f895130c0b0dd293b924b1c6cecac90a2e35dc6 Mon Sep 17 00:00:00 2001 From: Mithlesh Thukral Date: Wed, 25 Mar 2009 15:49:58 +0530 Subject: Staging: sxg: Fire watchdog timer at end of open routine to change the link The watchdog timer which updates the link status was not fired at the end of sxg_entry_open(). Add that. Signed-off-by: LinSysSoft Sahara Team Signed-off-by: Mithlesh Thukral Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c index 848d4be..52d2ab9 100644 --- a/drivers/staging/sxg/sxg.c +++ b/drivers/staging/sxg/sxg.c @@ -2254,6 +2254,8 @@ static int sxg_entry_open(struct net_device *dev) DBG_ERROR("sxg: %s EXIT\n", __func__); spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags); + mod_timer(&adapter->watchdog_timer, jiffies); + return STATUS_SUCCESS; } -- cgit v0.10.2 From 8d17e6ad8113f7534d978b1b3511f62637483fcc Mon Sep 17 00:00:00 2001 From: Mithlesh Thukral Date: Wed, 25 Mar 2009 15:50:34 +0530 Subject: Staging: sxg: Use correct queue_id for transmitting non-TCP packets Use correct queue_id while transmitting non-TCP packets. They should always use queue 0. Signed-off-by: LinSysSoft Sahara Team Signed-off-by: Mithlesh Thukral diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c index 52d2ab9..d8edf42 100644 --- a/drivers/staging/sxg/sxg.c +++ b/drivers/staging/sxg/sxg.c @@ -2615,7 +2615,9 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, struct iphdr *ip; ip = ip_hdr(skb); - if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof( + if (ip->protocol != IPPROTO_TCP || !tcp_hdr(skb)) + queue_id = 0; + else if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof( struct tcphdr))){ queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ? (ntohs (tcp_hdr(skb)->source) & @@ -2624,8 +2626,10 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, SXG_LARGE_SEND_QUEUE_MASK)); } } else if (skb->protocol == htons(ETH_P_IPV6)) { - if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength >= - sizeof(struct tcphdr)) ) { + if (ipv6_hdr(skb)->nexthdr != IPPROTO_TCP || !tcp_hdr(skb)) + queue_id = 0; + else if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength + >= sizeof(struct tcphdr)) ) { queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ? (ntohs (tcp_hdr(skb)->source) & SXG_LARGE_SEND_QUEUE_MASK): -- cgit v0.10.2 From cc4b8dfc3ff32f890cd5de0ce22de44f124d0d05 Mon Sep 17 00:00:00 2001 From: Mithlesh Thukral Date: Wed, 25 Mar 2009 15:51:14 +0530 Subject: Staging: sxg: Fix sleep in atomic context warning while loading driver Leave a spinlock before calling request_irq(). request_irq() calls kmalloc which can sleep. This was generating a warning dump while driver is loaded. Signed-off-by: LinSysSoft Sahara Team Signed-off-by: Mithlesh Thukral Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c index d8edf42..583fbb4 100644 --- a/drivers/staging/sxg/sxg.c +++ b/drivers/staging/sxg/sxg.c @@ -322,6 +322,8 @@ int sxg_add_msi_isr(struct adapter_t *adapter) int ret,i; if (!adapter->intrregistered) { + spin_unlock_irqrestore(&sxg_global.driver_lock, + sxg_global.flags); for (i=0; inr_msix_entries; i++) { ret = request_irq (adapter->msi_entries[i].vector, sxg_isr, @@ -329,6 +331,8 @@ int sxg_add_msi_isr(struct adapter_t *adapter) adapter->netdev->name, adapter->netdev); if (ret) { + spin_lock_irqsave(&sxg_global.driver_lock, + sxg_global.flags); DBG_ERROR("sxg: MSI-X request_irq (%s) " "FAILED [%x]\n", adapter->netdev->name, ret); @@ -336,6 +340,7 @@ int sxg_add_msi_isr(struct adapter_t *adapter) } } } + spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags); adapter->msi_enabled = TRUE; adapter->intrregistered = 1; adapter->IntRegistered = TRUE; -- cgit v0.10.2 From b824adc9686fb9a6edca164c13107bfed3e41d4e Mon Sep 17 00:00:00 2001 From: Mithlesh Thukral Date: Wed, 25 Mar 2009 15:51:49 +0530 Subject: Staging: sxg: Fix leaks and checksum errors in transmit code path Fix the transmit function for the following: * Free XmtCmd in the error code path. This use to leak memory in error conditions. * Do pci mapping after the checksum operations are over. They can reallocate the skb at a different location. * Fix UDP checksum errors which were seen in wireshark Signed-off-by: LinSysSoft Sahara Team Signed-off-by: Mithlesh Thukral Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c index 583fbb4..076b3f7 100644 --- a/drivers/staging/sxg/sxg.c +++ b/drivers/staging/sxg/sxg.c @@ -2582,6 +2582,7 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, u64 phys_addr; unsigned long flags; unsigned long queue_id=0; + int offload_cksum = 0; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl", pSgl, SxgSgl, 0, 0); @@ -2620,9 +2621,11 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, struct iphdr *ip; ip = ip_hdr(skb); - if (ip->protocol != IPPROTO_TCP || !tcp_hdr(skb)) + if (ip->protocol == IPPROTO_TCP) + offload_cksum = 1; + if (!offload_cksum || !tcp_hdr(skb)) queue_id = 0; - else if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof( + else if (offload_cksum && (DataLength >= sizeof( struct tcphdr))){ queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ? (ntohs (tcp_hdr(skb)->source) & @@ -2631,10 +2634,11 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, SXG_LARGE_SEND_QUEUE_MASK)); } } else if (skb->protocol == htons(ETH_P_IPV6)) { - if (ipv6_hdr(skb)->nexthdr != IPPROTO_TCP || !tcp_hdr(skb)) + if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) + offload_cksum = 1; + if (!offload_cksum || !tcp_hdr(skb)) queue_id = 0; - else if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength - >= sizeof(struct tcphdr)) ) { + else if (offload_cksum && (DataLength>=sizeof(struct tcphdr))){ queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ? (ntohs (tcp_hdr(skb)->source) & SXG_LARGE_SEND_QUEUE_MASK): @@ -2663,23 +2667,38 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, } SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd", XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0); - /* Update stats */ - adapter->stats.tx_packets++; - adapter->stats.tx_bytes += DataLength; -#if XXXTODO /* Stats stuff */ - if (SXG_MULTICAST_PACKET(EtherHdr)) { - if (SXG_BROADCAST_PACKET(EtherHdr)) { - adapter->Stats.DumbXmtBcastPkts++; - adapter->Stats.DumbXmtBcastBytes += DataLength; + memset(XmtCmd, '\0', sizeof(*XmtCmd)); + XmtCmd->SgEntries = 1; + XmtCmd->Flags = 0; + if (skb->ip_summed == CHECKSUM_PARTIAL) { + /* + * We need to set the Checkum in IP header to 0. This is + * required by hardware. + */ + if (offload_cksum) { + ip_hdr(skb)->check = 0x0; + XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP; + XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP; + /* + * Dont know if length will require a change in + * case of VLAN + */ + XmtCmd->CsumFlags.MacLen = ETH_HLEN; + XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >> + SXG_NW_HDR_LEN_SHIFT; } else { - adapter->Stats.DumbXmtMcastPkts++; - adapter->Stats.DumbXmtMcastBytes += DataLength; + if (skb_checksum_help(skb)){ + printk(KERN_EMERG "Dropped UDP packet for" + " incorrect checksum calculation\n"); + if (XmtCmd) + SXG_ABORT_CMD(XmtRingInfo); + spin_unlock_irqrestore(&adapter->XmtZeroLock, + flags); + return STATUS_SUCCESS; + } } - } else { - adapter->Stats.DumbXmtUcastPkts++; - adapter->Stats.DumbXmtUcastBytes += DataLength; } -#endif + /* * Fill in the command * Copy out the first SGE to the command and adjust for offset @@ -2697,31 +2716,17 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, (SXG_INVALID_SGL(phys_addr,skb->data_len))) { spin_unlock_irqrestore(&adapter->XmtZeroLock, flags); + if (XmtCmd) + SXG_ABORT_CMD(XmtRingInfo); /* Silently drop this packet */ printk(KERN_EMERG"Dropped a packet for 64k boundary problem\n"); return STATUS_SUCCESS; } - memset(XmtCmd, '\0', sizeof(*XmtCmd)); XmtCmd->Buffer.FirstSgeAddress = phys_addr; XmtCmd->Buffer.FirstSgeLength = DataLength; XmtCmd->Buffer.SgeOffset = 0; XmtCmd->Buffer.TotalLength = DataLength; - XmtCmd->SgEntries = 1; - XmtCmd->Flags = 0; - if (skb->ip_summed == CHECKSUM_PARTIAL) { - /* - * We need to set the Checkum in IP header to 0. This is - * required by hardware. - */ - ip_hdr(skb)->check = 0x0; - XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP; - XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP; - /* Dont know if length will require a change in case of VLAN */ - XmtCmd->CsumFlags.MacLen = ETH_HLEN; - XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >> - SXG_NW_HDR_LEN_SHIFT; - } /* * Advance transmit cmd descripter by 1. * NOTE - See comments in SxgTcpOutput where we write @@ -2733,6 +2738,24 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, ASSERT((queue_id & ~SXG_LARGE_SEND_QUEUE_MASK) == 0); WRITE_REG(adapter->UcodeRegs[0].XmtCmd, ((queue_id << 16) | 1), TRUE); adapter->Stats.XmtQLen++; /* Stats within lock */ + /* Update stats */ + adapter->stats.tx_packets++; + adapter->stats.tx_bytes += DataLength; +#if XXXTODO /* Stats stuff */ + if (SXG_MULTICAST_PACKET(EtherHdr)) { + if (SXG_BROADCAST_PACKET(EtherHdr)) { + adapter->Stats.DumbXmtBcastPkts++; + adapter->Stats.DumbXmtBcastBytes += DataLength; + } else { + adapter->Stats.DumbXmtMcastPkts++; + adapter->Stats.DumbXmtMcastBytes += DataLength; + } + } else { + adapter->Stats.DumbXmtUcastPkts++; + adapter->Stats.DumbXmtUcastBytes += DataLength; + } +#endif + spin_unlock_irqrestore(&adapter->XmtZeroLock, flags); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2", XmtCmd, pSgl, SxgSgl, 0); -- cgit v0.10.2 From 86a79d2e7094589413880eefa5c6111032382584 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 13 Apr 2009 13:16:54 -0700 Subject: Staging: go7007: fix build issues Now that TUNER_SET_TYPE_ADDR is gone from the tree, the older code kicks in and tries to use TUNER_SET_TYPE, which went away a long time ago. This patch removes all of this logic, as it should not be needed anymore now, and by doing so, fixes the build. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c index 58bfc8d..f47c0ce 100644 --- a/drivers/staging/go7007/go7007-driver.c +++ b/drivers/staging/go7007/go7007-driver.c @@ -268,21 +268,6 @@ int go7007_register_encoder(struct go7007 *go) init_i2c_module(&go->i2c_adapter, go->board_info->i2c_devs[i].id, go->board_info->i2c_devs[i].addr); -#ifdef TUNER_SET_TYPE_ADDR - if (go->tuner_type >= 0) { - struct tuner_setup tun_setup = { - .mode_mask = T_ANALOG_TV, - .addr = ADDR_UNSET, - .type = go->tuner_type - }; - i2c_clients_command(&go->i2c_adapter, - TUNER_SET_TYPE_ADDR, &tun_setup); - } -#else - if (go->tuner_type >= 0) - i2c_clients_command(&go->i2c_adapter, - TUNER_SET_TYPE, &go->tuner_type); -#endif if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) i2c_clients_command(&go->i2c_adapter, DECODER_SET_CHANNEL, &go->channel_number); diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c index 58fddb1..0a7eeef 100644 --- a/drivers/staging/go7007/wis-sony-tuner.c +++ b/drivers/staging/go7007/wis-sony-tuner.c @@ -386,6 +386,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct wis_sony_tuner *t = i2c_get_clientdata(client); switch (cmd) { +#if 0 #ifdef TUNER_SET_TYPE_ADDR case TUNER_SET_TYPE_ADDR: { @@ -463,6 +464,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) t->type, sony_tuners[t->type - 200].name); break; } +#endif case VIDIOC_G_FREQUENCY: { struct v4l2_frequency *f = arg; -- cgit v0.10.2 From 5672487d29bd6a3cb0bff941d4f4535ccacc41ed Mon Sep 17 00:00:00 2001 From: Daniele Napolitano Date: Tue, 14 Apr 2009 16:58:33 -0700 Subject: otus/zdusb.c: additional USB idnetifier Provide support for WN111v2 USB 802.11n adapter. Signed-off-by: Daniele Napolitano Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/otus/zdusb.c b/drivers/staging/otus/zdusb.c index 78f1d22..2a6d937 100644 --- a/drivers/staging/otus/zdusb.c +++ b/drivers/staging/otus/zdusb.c @@ -48,7 +48,8 @@ static const char driver_name[] = "Otus"; static struct usb_device_id zd1221_ids [] = { { USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) }, { USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) }, - { USB_DEVICE(0x0846, 0x9010) }, + { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) }, + { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WN111v2) }, { } /* Terminating entry */ }; diff --git a/drivers/staging/otus/zdusb.h b/drivers/staging/otus/zdusb.h index 656dc21..9f8ab2e 100644 --- a/drivers/staging/otus/zdusb.h +++ b/drivers/staging/otus/zdusb.h @@ -40,4 +40,8 @@ #define VENDOR_DLINK 0x07D1 //Dlink #define PRODUCT_DWA160A 0x3C10 +#define VENDOR_NETGEAR 0x0846 /* NetGear */ +#define PRODUCT_WNDA3100 0x9010 +#define PRODUCT_WN111v2 0x9001 + #endif -- cgit v0.10.2 From 1a92e82a86556727da1626393f2a6becf7e62f39 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 15 Apr 2009 16:52:16 -0700 Subject: staging: slicoss: update README I looked, I gagged, I left Signed-off-by: Stephen Hemminger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/slicoss/README b/drivers/staging/slicoss/README index 2d5b112..70f49099 100644 --- a/drivers/staging/slicoss/README +++ b/drivers/staging/slicoss/README @@ -10,7 +10,36 @@ TODO: - move firmware loading to request_firmware() - remove direct memory access of structures - any remaining sparse and checkpatch.pl warnings - - any netdev recommended changes + + - use net_device_ops + - use dev->stats rather than adapter->stats + - don't cast netdev_priv it is already void + - use compare_ether_addr + - GET RID OF MACROS + - work on all architectures + - without CONFIG_X86_64 confusion + - do 64 bit correctly + - don't depend on order of union + - get rid of ASSERT(), use BUG() instead but only where necessary + looks like most aren't really useful + - no new SIOCDEVPRIVATE ioctl allowed + - don't use module_param for configuring interrupt mitigation + use ethtool instead + - reorder code to elminate use of forward declarations + - don't keep private linked list of drivers. + - remove all the gratiutous debug infrastructure + - use PCI_DEVICE() + - do ethtool correctly using ethtool_ops + - NAPI? + - wasted overhead of extra stats + - state variables for things that are + easily availble and shouldn't be kept in card structure, cardnum, ... + slotnumber, events, ... + - get rid of slic_spinlock wrapper + - volatile == bad design => bad code + - locking too fine grained, not designed just throw more locks + at problem + Please send patches to: Greg Kroah-Hartman -- cgit v0.10.2 From 7181d4673710888b6d7084b37b9d77ed4f4e41b2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 15 Apr 2009 21:33:15 +0200 Subject: mac80211: avoid crashing when no scan sdata Using the scan_sdata variable here is terribly wrong, if there has never been a scan then we fail. However, we need a bandaid... Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.29] Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1b14d02..dc60804 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2113,12 +2113,13 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work) struct ieee80211_local *local = container_of(work, struct ieee80211_local, dynamic_ps_enable_work); + /* XXX: using scan_sdata is completely broken! */ struct ieee80211_sub_if_data *sdata = local->scan_sdata; if (local->hw.conf.flags & IEEE80211_CONF_PS) return; - if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) + if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata) ieee80211_send_nullfunc(local, sdata, 1); local->hw.conf.flags |= IEEE80211_CONF_PS; -- cgit v0.10.2 From 160002fe845218f5789a26954048592c3920ac7b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 16 Apr 2009 12:15:38 +0200 Subject: cfg80211: copy hold when replacing BSS When we receive a probe response frame we can replace the BSS struct in our list -- but if that struct is held then we need to hold the new one as well. We really should fix this completely and not replace the struct, but this is a bandaid for now. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 2a00e36..4c77669 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -364,6 +364,8 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, list_replace(&found->list, &res->list); rb_replace_node(&found->rbn, &res->rbn, &dev->bss_tree); + /* XXX: workaround */ + res->hold = found->hold; kref_put(&found->ref, bss_release); found = res; } else if (found) { -- cgit v0.10.2 From cd1658f592a60d028dd2e48d86724b737a82cab0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 16 Apr 2009 15:00:58 +0200 Subject: cfg80211: do not replace BSS structs Instead, allocate extra IE memory if necessary. Normally, this isn't even necessary since there's enough space. This is a better way of correcting the "held BSS can disappear" issue, but also a lot more code. It is also necessary for proper auth/assoc BSS handling in the future. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/core.h b/net/wireless/core.h index d43daa2..0a592e4 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -90,7 +90,7 @@ struct cfg80211_internal_bss { struct rb_node rbn; unsigned long ts; struct kref ref; - bool hold; + bool hold, ies_allocated; /* must be last because of priv member */ struct cfg80211_bss pub; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 4c77669..2ae65b3 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -58,6 +58,10 @@ static void bss_release(struct kref *ref) bss = container_of(ref, struct cfg80211_internal_bss, ref); if (bss->pub.free_priv) bss->pub.free_priv(&bss->pub); + + if (bss->ies_allocated) + kfree(bss->pub.information_elements); + kfree(bss); } @@ -360,21 +364,41 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, found = rb_find_bss(dev, res); - if (found && overwrite) { - list_replace(&found->list, &res->list); - rb_replace_node(&found->rbn, &res->rbn, - &dev->bss_tree); - /* XXX: workaround */ - res->hold = found->hold; - kref_put(&found->ref, bss_release); - found = res; - } else if (found) { + if (found) { kref_get(&found->ref); found->pub.beacon_interval = res->pub.beacon_interval; found->pub.tsf = res->pub.tsf; found->pub.signal = res->pub.signal; found->pub.capability = res->pub.capability; found->ts = res->ts; + + /* overwrite IEs */ + if (overwrite) { + size_t used = dev->wiphy.bss_priv_size + sizeof(*res); + size_t ielen = res->pub.len_information_elements; + + if (ksize(found) >= used + ielen) { + memcpy(found->pub.information_elements, + res->pub.information_elements, ielen); + found->pub.len_information_elements = ielen; + } else { + u8 *ies = found->pub.information_elements; + + if (found->ies_allocated) { + if (ksize(ies) < ielen) + ies = krealloc(ies, ielen, + GFP_ATOMIC); + } else + ies = kmalloc(ielen, GFP_ATOMIC); + + if (ies) { + memcpy(ies, res->pub.information_elements, ielen); + found->ies_allocated = true; + found->pub.information_elements = ies; + } + } + } + kref_put(&res->ref, bss_release); } else { /* this "consumes" the reference */ -- cgit v0.10.2 From 60375541f7c8a577b977d344565259776c3acfc1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 17 Apr 2009 00:54:23 +0200 Subject: mac80211: validate TIM IE length The TIM IE must not be shorter than 4 bytes, so verify that when parsing it. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index dc60804..1619e0c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -441,6 +441,9 @@ static bool ieee80211_check_tim(struct ieee802_11_elems *elems, u16 aid) u8 index, indexn1, indexn2; struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) elems->tim; + if (unlikely(!tim || elems->tim_len < 4)) + return false; + aid &= 0x3fff; index = aid / 8; mask = 1 << (aid & 7); -- cgit v0.10.2 From 957b0516f7881284b48f2f2e4a909a1c5de0ddf8 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 17 Apr 2009 14:52:23 +0200 Subject: ar9170usb: add ZyXEL NWD271N Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c index 43e8d8d..c9e422e 100644 --- a/drivers/net/wireless/ar9170/usb.c +++ b/drivers/net/wireless/ar9170/usb.c @@ -69,6 +69,8 @@ static struct usb_device_id ar9170_usb_ids[] = { { USB_DEVICE(0x0846, 0x9001) }, /* Zydas ZD1221 */ { USB_DEVICE(0x0ace, 0x1221) }, + /* ZyXEL NWD271N */ + { USB_DEVICE(0x0586, 0x3417) }, /* Z-Com UB81 BG */ { USB_DEVICE(0x0cde, 0x0023) }, /* Z-Com UB82 ABG */ -- cgit v0.10.2 From 07f4f8bf436e3f389a12cb792ad16275b9091b51 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 16 Apr 2009 13:46:12 -0700 Subject: drm/i915: Don't let an oops get triggered from irq_emit without dma init. Userland is broken if it's trying this, but we also shouldn't allow oopses. Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index ee7ce7b..98bb4c8 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -406,7 +406,7 @@ int i915_irq_emit(struct drm_device *dev, void *data, drm_i915_irq_emit_t *emit = data; int result; - if (!dev_priv) { + if (!dev_priv || !dev_priv->ring.virtual_start) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } -- cgit v0.10.2 From 5b0bdd6f7284ed39ee553f8a8c4f0d372c87133a Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 16 Apr 2009 15:17:39 -0700 Subject: drm/i915: fix transition to I915_TILING_NONE Transitions to TILING_NONE skipped the call to unbind the object, which left the fence register set and caused future CPU access through the GTT to access the object in tiled mode. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index f27e523..52a0593 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -283,7 +283,6 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); if (args->tiling_mode == I915_TILING_NONE) { - obj_priv->tiling_mode = I915_TILING_NONE; args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE; } else { if (args->tiling_mode == I915_TILING_X) -- cgit v0.10.2 From d770e3cfe5a274a343d896b2cc1646af85646fbc Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 15 Apr 2009 21:46:36 +0100 Subject: drm/i915: Register ACPI video even when not modesetting The ACPI video driver defers registration to the i915 driver if the system supports opregion-mediated backlight control. This registration was only being performed in the KMS case. Ensure it's done even if we don't have modesetting enabled. Signed-off-by: Matthew Garrett Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c index 6942772..8dc1fd3 100644 --- a/drivers/gpu/drm/i915/i915_opregion.c +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -370,11 +370,8 @@ int intel_opregion_init(struct drm_device *dev, int resume) if (mboxes & MBOX_ACPI) { DRM_DEBUG("Public ACPI methods supported\n"); opregion->acpi = base + OPREGION_ACPI_OFFSET; - if (drm_core_check_feature(dev, DRIVER_MODESET)) { + if (drm_core_check_feature(dev, DRIVER_MODESET)) intel_didl_outputs(dev); - if (!resume) - acpi_video_register(); - } } else { DRM_DEBUG("Public ACPI methods not supported\n"); err = -ENOTSUPP; @@ -391,6 +388,10 @@ int intel_opregion_init(struct drm_device *dev, int resume) opregion->asle = base + OPREGION_ASLE_OFFSET; } + if (!resume) + acpi_video_register(); + + /* Notify BIOS we are ready to handle ACPI video ext notifs. * Right now, all the events are handled by the ACPI video module. * We don't actually need to do anything with them. */ -- cgit v0.10.2 From 3b1c1c1118880921da1188b7245e0470742802f8 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 1 Apr 2009 19:52:29 +0100 Subject: drm/i915: Unregister ACPI video driver when exiting The i915 DRM triggers registration of the ACPI video driver on load. It should unregister it at unload in order to avoid generating backtraces on being reloaded. Signed-off-by: Matthew Garrett Signed-off-by: Eric Anholt diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index cd4fb75..8961e61 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -2293,7 +2293,7 @@ static int __init acpi_video_init(void) return acpi_video_register(); } -static void __exit acpi_video_exit(void) +void __exit acpi_video_exit(void) { acpi_bus_unregister_driver(&acpi_video_bus); @@ -2302,6 +2302,7 @@ static void __exit acpi_video_exit(void) return; } +EXPORT_SYMBOL(acpi_video_exit); module_init(acpi_video_init); module_exit(acpi_video_exit); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index a000cf0..27261438 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1232,7 +1232,7 @@ int i915_driver_unload(struct drm_device *dev) if (dev_priv->regs != NULL) iounmap(dev_priv->regs); - intel_opregion_free(dev); + intel_opregion_free(dev, 0); if (drm_core_check_feature(dev, DRIVER_MODESET)) { intel_modeset_cleanup(dev); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 6503e22..98560e1 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -77,7 +77,7 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) drm_irq_uninstall(dev); } - intel_opregion_free(dev); + intel_opregion_free(dev, 1); if (state.event == PM_EVENT_SUSPEND) { /* Shut down the device */ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 473a8f7..d7471fe 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -674,12 +674,12 @@ extern int i915_restore_state(struct drm_device *dev); #ifdef CONFIG_ACPI /* i915_opregion.c */ extern int intel_opregion_init(struct drm_device *dev, int resume); -extern void intel_opregion_free(struct drm_device *dev); +extern void intel_opregion_free(struct drm_device *dev, int suspend); extern void opregion_asle_intr(struct drm_device *dev); extern void opregion_enable_asle(struct drm_device *dev); #else static inline int intel_opregion_init(struct drm_device *dev, int resume) { return 0; } -static inline void intel_opregion_free(struct drm_device *dev) { return; } +static inline void intel_opregion_free(struct drm_device *dev, int suspend) { return; } static inline void opregion_asle_intr(struct drm_device *dev) { return; } static inline void opregion_enable_asle(struct drm_device *dev) { return; } #endif diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c index 8dc1fd3..3eceefe 100644 --- a/drivers/gpu/drm/i915/i915_opregion.c +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -409,7 +409,7 @@ err_out: return err; } -void intel_opregion_free(struct drm_device *dev) +void intel_opregion_free(struct drm_device *dev, int suspend) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_opregion *opregion = &dev_priv->opregion; @@ -417,6 +417,9 @@ void intel_opregion_free(struct drm_device *dev) if (!opregion->enabled) return; + if (!suspend) + acpi_video_exit(); + opregion->acpi->drdy = 0; system_opregion = NULL; diff --git a/include/acpi/video.h b/include/acpi/video.h index f0275bb..af6fe95 100644 --- a/include/acpi/video.h +++ b/include/acpi/video.h @@ -3,8 +3,10 @@ #if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE) extern int acpi_video_register(void); +extern int acpi_video_exit(void); #else static inline int acpi_video_register(void) { return 0; } +static inline void acpi_video_exit(void) { return; } #endif #endif -- cgit v0.10.2 From 44ab43155e8071fbf037513e57de9a79044edf56 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 1 Apr 2009 19:53:33 +0100 Subject: drm/i915: Enable ASLE if present The changes to opregion initialisation order meant that the ASLE setup code might not be run at the correct time. Ensure that the interrupts are set up. Signed-off-by: Matthew Garrett Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c index 3eceefe..dc425e7 100644 --- a/drivers/gpu/drm/i915/i915_opregion.c +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -386,6 +386,7 @@ int intel_opregion_init(struct drm_device *dev, int resume) if (mboxes & MBOX_ASLE) { DRM_DEBUG("ASLE supported\n"); opregion->asle = base + OPREGION_ASLE_OFFSET; + opregion_enable_asle(dev); } if (!resume) -- cgit v0.10.2 From dc098551918093901d8ac8936e9d1a1b891b56ed Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Fri, 17 Apr 2009 09:22:42 -0500 Subject: x86/uv: fix init of memory-less nodes Add support for nodes that have cpus but no memory. The current code was failing to add these nodes to the nodes_present_map. v2: Fixes case caught by David Rientjes - missed support for the x2apic SRAT table. [ Impact: fix potential boot crash on memory-less UV nodes. ] Reported-by: David Rientjes Signed-off-by: Jack Steiner LKML-Reference: <20090417142242.GA23743@sgi.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index c7d272b..33c5fa5 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -28,6 +28,7 @@ int acpi_numa __initdata; static struct acpi_table_slit *acpi_slit; static nodemask_t nodes_parsed __initdata; +static nodemask_t cpu_nodes_parsed __initdata; static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode nodes_add[MAX_NUMNODES]; static int found_add_area __initdata; @@ -141,6 +142,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) apic_id = pa->apic_id; apicid_to_node[apic_id] = node; + node_set(node, cpu_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n", pxm, apic_id, node); @@ -174,6 +176,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) else apic_id = pa->apic_id; apicid_to_node[apic_id] = node; + node_set(node, cpu_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n", pxm, apic_id, node); @@ -402,7 +405,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) return -1; } - node_possible_map = nodes_parsed; + /* Account for nodes with cpus and no memory */ + nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed); /* Finally register nodes */ for_each_node_mask(i, node_possible_map) -- cgit v0.10.2 From 27229ca63269c1be0a710f074fa9de4024f283f1 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Fri, 17 Apr 2009 09:24:47 -0500 Subject: x86/uv: fix init of cpu-less nodes Fix an endcase in the UV initialization code for the "UV large system mode" of apicids. If node zero contains no cpus, cpus on another node will be the boot cpu. The percpu data that contains the extra apicid bits was not being initialized early enough. [ Impact: fix potential boot crash on cpu-less UV nodes ] Signed-off-by: Jack Steiner LKML-Reference: <20090417142447.GA23759@sgi.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 1248318..49d2f5c 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -34,6 +35,17 @@ DEFINE_PER_CPU(int, x2apic_extra_bits); static enum uv_system_type uv_system_type; +static int early_get_nodeid(void) +{ + union uvh_node_id_u node_id; + unsigned long *mmr; + + mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr)); + node_id.v = *mmr; + early_iounmap(mmr, sizeof(*mmr)); + return node_id.s.node_id; +} + static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (!strcmp(oem_id, "SGI")) { @@ -42,6 +54,8 @@ static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) else if (!strcmp(oem_table_id, "UVX")) uv_system_type = UV_X2APIC; else if (!strcmp(oem_table_id, "UVH")) { + __get_cpu_var(x2apic_extra_bits) = + early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1); uv_system_type = UV_NON_UNIQUE_APIC; return 1; } -- cgit v0.10.2 From 1648e4f805063137b55b869666e936ffd4419cdf Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 17 Apr 2009 10:46:37 -0700 Subject: x86, kbuild: make "make install" not depend on vmlinux It is common to use "make install" in restricted environments which differ from the one which was actually used to build the kernel. In such environments it is highly undesirable to trigger a rebuild of any part of the system. Worse, the rebuild may be spurious, triggered by differences in the environment. Signed-off-by: H. Peter Anvin Cc: Sam Ravnborg LKML-Reference: <20090415234642.GA28531@uranus.ravnborg.org> diff --git a/arch/x86/Makefile b/arch/x86/Makefile index f05d8c9..8c86b72 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -153,7 +153,7 @@ endif boot := arch/x86/boot -BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install +BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage PHONY += bzImage $(BOOT_TARGETS) @@ -171,6 +171,10 @@ bzImage: vmlinux $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ +PHONY += install +install: + $(Q)$(MAKE) $(build)=$(boot) $@ + PHONY += vdso_install vdso_install: $(Q)$(MAKE) $(build)=arch/x86/vdso $@ -- cgit v0.10.2 From a81b6314e0aa480b8ac6dd02779d44cd0bee0a34 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 17 Apr 2009 23:31:20 +0530 Subject: x86: mm/numa_32.c calculate_numa_remap_pages should use __init calculate_numa_remap_pages() is called only by __init initmem_init() further calculate_numa_remap_pages is calling: __init find_e820_area() and __init reserve_early() So calculate_numa_remap_pages() should be __init calculate_numa_remap_pages(). WARNING: arch/x86/built-in.o(.text+0x82ea3): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:find_e820_area() The function calculate_numa_remap_pages() references the function __init find_e820_area(). This is often because calculate_numa_remap_pages lacks a __init annotation or the annotation of find_e820_area is wrong. WARNING: arch/x86/built-in.o(.text+0x82f5f): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:reserve_early() The function calculate_numa_remap_pages() references the function __init reserve_early(). This is often because calculate_numa_remap_pages lacks a __init annotation or the annotation of reserve_early is wrong. [ Impact: save memory, address Section mismatch warning ] Signed-off-by: Jaswinder Singh Rajput Cc: Sam Ravnborg LKML-Reference: <1239991281.3153.4.camel@ht.satnam> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 3daefa0..d253006 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -257,7 +257,7 @@ void resume_map_numa_kva(pgd_t *pgd_base) } #endif -static unsigned long calculate_numa_remap_pages(void) +static __init unsigned long calculate_numa_remap_pages(void) { int nid; unsigned long size, reserve_pages = 0; -- cgit v0.10.2 From fc6f394332ef1bf6ff5fbeaba0f2cd7a3c7971b6 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 17 Apr 2009 11:45:30 -0400 Subject: cifs: when renaming don't try to unlink negative dentry When attempting to rename a file on a read-only share, the kernel can call cifs_unlink on a negative dentry, which causes an oops. Only try to unlink the file if it's a positive dentry. Signed-off-by: Jeff Layton Tested-by: Shirish Pargaonkar CC: Stable Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 09082ac..f36b4e4 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1453,7 +1453,8 @@ int cifs_rename(struct inode *source_dir, struct dentry *source_dentry, checking the UniqueId via FILE_INTERNAL_INFO */ unlink_target: - if ((rc == -EACCES) || (rc == -EEXIST)) { + /* Try unlinking the target dentry if it's not negative */ + if (target_dentry->d_inode && (rc == -EACCES || rc == -EEXIST)) { tmprc = cifs_unlink(target_dir, target_dentry); if (tmprc) goto cifs_rename_exit; -- cgit v0.10.2 From 7816a0a862d851d0b05710e7d94bfe390f3180e2 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Fri, 17 Apr 2009 15:59:23 -0700 Subject: vlan/macvlan: fix NULL pointer dereferences in ethtool handlers Check whether the underlying device provides a set of ethtool ops before checking for individual handlers to avoid NULL pointer dereferences. Reported-by: Art van Breemen Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 70d3ef4a..214a8cf 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -376,7 +376,8 @@ static u32 macvlan_ethtool_get_rx_csum(struct net_device *dev) const struct macvlan_dev *vlan = netdev_priv(dev); struct net_device *lowerdev = vlan->lowerdev; - if (lowerdev->ethtool_ops->get_rx_csum == NULL) + if (lowerdev->ethtool_ops == NULL || + lowerdev->ethtool_ops->get_rx_csum == NULL) return 0; return lowerdev->ethtool_ops->get_rx_csum(lowerdev); } @@ -387,7 +388,8 @@ static int macvlan_ethtool_get_settings(struct net_device *dev, const struct macvlan_dev *vlan = netdev_priv(dev); struct net_device *lowerdev = vlan->lowerdev; - if (!lowerdev->ethtool_ops->get_settings) + if (!lowerdev->ethtool_ops || + !lowerdev->ethtool_ops->get_settings) return -EOPNOTSUPP; return lowerdev->ethtool_ops->get_settings(lowerdev, cmd); @@ -398,7 +400,8 @@ static u32 macvlan_ethtool_get_flags(struct net_device *dev) const struct macvlan_dev *vlan = netdev_priv(dev); struct net_device *lowerdev = vlan->lowerdev; - if (!lowerdev->ethtool_ops->get_flags) + if (!lowerdev->ethtool_ops || + !lowerdev->ethtool_ops->get_flags) return 0; return lowerdev->ethtool_ops->get_flags(lowerdev); } diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 1b34135..6b09213 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -668,7 +668,8 @@ static int vlan_ethtool_get_settings(struct net_device *dev, const struct vlan_dev_info *vlan = vlan_dev_info(dev); struct net_device *real_dev = vlan->real_dev; - if (!real_dev->ethtool_ops->get_settings) + if (!real_dev->ethtool_ops || + !real_dev->ethtool_ops->get_settings) return -EOPNOTSUPP; return real_dev->ethtool_ops->get_settings(real_dev, cmd); -- cgit v0.10.2 From 8d2b450d0f9233f221d545f26720eebbc468e857 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 13 Apr 2009 11:27:18 -0400 Subject: sata_mv: tidy up qc->tf usage in qc_prep() functions Tidy up qc->tf accesses in the mv_qc_prep() functions. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 37ae5dc..c7da602 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1898,17 +1898,17 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct mv_port_priv *pp = ap->private_data; __le16 *cw; - struct ata_taskfile *tf; + struct ata_taskfile *tf = &qc->tf; u16 flags = 0; unsigned in_index; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) + if ((tf->protocol != ATA_PROT_DMA) && + (tf->protocol != ATA_PROT_NCQ)) return; /* Fill in command request block */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + if (!(tf->flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; @@ -1924,7 +1924,6 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags); cw = &pp->crqb[in_index].ata_cmd[0]; - tf = &qc->tf; /* Sadly, the CRQB cannot accomodate all registers--there are * only 11 bytes...so we must pick and choose required @@ -1990,16 +1989,16 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct mv_port_priv *pp = ap->private_data; struct mv_crqb_iie *crqb; - struct ata_taskfile *tf; + struct ata_taskfile *tf = &qc->tf; unsigned in_index; u32 flags = 0; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) + if ((tf->protocol != ATA_PROT_DMA) && + (tf->protocol != ATA_PROT_NCQ)) return; /* Fill in Gen IIE command request block */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + if (!(tf->flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); @@ -2015,7 +2014,6 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16); crqb->flags = cpu_to_le32(flags); - tf = &qc->tf; crqb->ata_cmd[0] = cpu_to_le32( (tf->command << 16) | (tf->feature << 24) -- cgit v0.10.2 From 299b3f8df90a3f7416d8df121d8a42b1a2aeced4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 13 Apr 2009 11:29:34 -0400 Subject: sata_mv: workaround for multi_count errata sata24 Workaround for errata SATA#24 in sata_mv. This errata affects WRITE_MULTI* commands when the device multi_count produces a DRQ block size >= 4Kbytes. We work around it here by converting such operations into ordinary PIO_WRITEs instead. Note that this might result in a PIO FUA write unavoidably being converted into a non-FUA write. In practice, any system using FUA is also going to be using DMA rather than PIO, so this shouldn't affect anyone in the real world. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index c7da602..870dcfd 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1881,6 +1881,39 @@ static u8 mv_bmdma_status(struct ata_port *ap) return status; } +static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + /* + * Workaround for 88SX60x1 FEr SATA#24. + * + * Chip may corrupt WRITEs if multi_count >= 4kB. + * Note that READs are unaffected. + * + * It's not clear if this errata really means "4K bytes", + * or if it always happens for multi_count > 7 + * regardless of device sector_size. + * + * So, for safety, any write with multi_count > 7 + * gets converted here into a regular PIO write instead: + */ + if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) { + if (qc->dev->multi_count > 7) { + switch (tf->command) { + case ATA_CMD_WRITE_MULTI: + tf->command = ATA_CMD_PIO_WRITE; + break; + case ATA_CMD_WRITE_MULTI_FUA_EXT: + tf->flags &= ~ATA_TFLAG_FUA; /* ugh */ + /* fall through */ + case ATA_CMD_WRITE_MULTI_EXT: + tf->command = ATA_CMD_PIO_WRITE_EXT; + break; + } + } + } +} + /** * mv_qc_prep - Host specific command preparation. * @qc: queued command to prepare @@ -1902,9 +1935,16 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) u16 flags = 0; unsigned in_index; - if ((tf->protocol != ATA_PROT_DMA) && - (tf->protocol != ATA_PROT_NCQ)) + switch (tf->protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NCQ: + break; /* continue below */ + case ATA_PROT_PIO: + mv_rw_multi_errata_sata24(qc); return; + default: + return; + } /* Fill in command request block */ -- cgit v0.10.2 From b4746ed785d776b1be647458bc911cc607c6ef1c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 17 Apr 2009 12:21:21 +0100 Subject: pata_via: Cache and rewrite the device bit Some VIA chipsets will reset the DEV bit after IEN changes on ctl. Our optimised write path avoids doing this but we need to remove the optimisation on these devices. [Identified and some original patches proposed by Josehn Chan @ VIA but discussion then all ground to a halt so given a test case I dug it back out] Signed-off-by: Alan Cox diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index b08e6e0..45657ca 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -62,7 +62,7 @@ #include #define DRV_NAME "pata_via" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.4" /* * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx @@ -136,6 +136,9 @@ static const struct via_isa_bridge { { NULL } }; +struct via_port { + u8 cached_device; +}; /* * Cable special cases @@ -346,14 +349,70 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) */ static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { - struct ata_taskfile tmp_tf; + struct ata_ioports *ioaddr = &ap->ioaddr; + struct via_port *vp = ap->private_data; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + int newctl = 0; + + if (tf->ctl != ap->last_ctl) { + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + newctl = 1; + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + iowrite8(tf->device, ioaddr->device_addr); + vp->cached_device = tf->device; + } else if (newctl) + iowrite8(vp->cached_device, ioaddr->device_addr); + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + WARN_ON_ONCE(!ioaddr->ctl_addr); + iowrite8(tf->hob_feature, ioaddr->feature_addr); + iowrite8(tf->hob_nsect, ioaddr->nsect_addr); + iowrite8(tf->hob_lbal, ioaddr->lbal_addr); + iowrite8(tf->hob_lbam, ioaddr->lbam_addr); + iowrite8(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } - if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) { - tmp_tf = *tf; - tmp_tf.flags |= ATA_TFLAG_DEVICE; - tf = &tmp_tf; + if (is_addr) { + iowrite8(tf->feature, ioaddr->feature_addr); + iowrite8(tf->nsect, ioaddr->nsect_addr); + iowrite8(tf->lbal, ioaddr->lbal_addr); + iowrite8(tf->lbam, ioaddr->lbam_addr); + iowrite8(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); } - ata_sff_tf_load(ap, tf); + + ata_wait_idle(ap); +} + +static int via_port_start(struct ata_port *ap) +{ + struct via_port *vp; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + int ret = ata_sff_port_start(ap); + if (ret < 0) + return ret; + + vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL); + if (vp == NULL) + return -ENOMEM; + ap->private_data = vp; + return 0; } static struct scsi_host_template via_sht = { @@ -367,6 +426,7 @@ static struct ata_port_operations via_port_ops = { .set_dmamode = via_set_dmamode, .prereset = via_pre_reset, .sff_tf_load = via_tf_load, + .port_start = via_port_start, }; static struct ata_port_operations via_port_ops_noirq = { -- cgit v0.10.2 From 16e6aeca9e86fb0effb847c1687c9b2cc8e3fb4c Mon Sep 17 00:00:00 2001 From: Zhenwen Xu Date: Fri, 17 Apr 2009 15:32:59 +0800 Subject: [libata] fix build error on drivers/ata/pata_legacy.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix those errors: drivers/ata/pata_legacy.c: In function ‘pdc_data_xfer_vlb’: drivers/ata/pata_legacy.c:289: error: ‘ap’ undeclared (first use in this function) drivers/ata/pata_legacy.c:289: error: (Each undeclared identifier is reported only once drivers/ata/pata_legacy.c:289: error: for each function it appears in.) drivers/ata/pata_legacy.c: At top level: drivers/ata/pata_legacy.c:869: error: ‘ATA_PFLAG_PIO32_CHANGE’ undeclared here (not in a +function) make[2]: *** [drivers/ata/pata_legacy.o] Error 1 make[1]: *** [drivers/ata] Error 2 Signed-off-by: Zhenwen Xu Acked-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 6f985be..f72c6c5 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -285,10 +285,11 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) { int slop = buflen & 3; + struct ata_port *ap = dev->link->ap; + /* 32bit I/O capable *and* we need to write a whole number of dwords */ if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3) && (ap->pflags & ATA_PFLAG_PIO32)) { - struct ata_port *ap = dev->link->ap; unsigned long flags; local_irq_save(flags); @@ -866,7 +867,7 @@ static struct legacy_controller controllers[] = { 0, 0, NULL }, {"PDC20230", &pdc20230_port_ops, 0x7, ATA_FLAG_NO_IORDY, - ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, NULL }, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL }, {"HT6560A", &ht6560a_port_ops, 0x07, ATA_FLAG_NO_IORDY, 0, NULL }, {"HT6560B", &ht6560b_port_ops, 0x1F, @@ -877,13 +878,13 @@ static struct legacy_controller controllers[] = { 0, 0, NULL }, {"QDI6500", &qdi6500_port_ops, 0x07, ATA_FLAG_NO_IORDY, - ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port }, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, {"QDI6580", &qdi6580_port_ops, 0x1F, - 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, - 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, {"W83759A", &winbond_port_ops, 0x1F, - 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, winbond_port } }; -- cgit v0.10.2 From defc433ba3bc587826bb467ce0e63452deafa65d Mon Sep 17 00:00:00 2001 From: Etienne Basset Date: Thu, 16 Apr 2009 23:58:42 +0200 Subject: Smack: check for SMACK xattr validity in smack_inode_setxattr the following patch moves checks for SMACK xattr validity from smack_inode_post_setxattr (which cannot return an error to the user) to smack_inode_setxattr (which can return an error). Signed-off-by: Etienne Basset Acked-by: Casey Schaufler Signed-off-by: James Morris diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 9215149..98b3195 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -609,8 +609,12 @@ static int smack_inode_setxattr(struct dentry *dentry, const char *name, strcmp(name, XATTR_NAME_SMACKIPOUT) == 0) { if (!capable(CAP_MAC_ADMIN)) rc = -EPERM; - /* a label cannot be void and cannot begin with '-' */ - if (size == 0 || (size > 0 && ((char *)value)[0] == '-')) + /* + * check label validity here so import wont fail on + * post_setxattr + */ + if (size == 0 || size >= SMK_LABELLEN || + smk_import(value, size) == NULL) rc = -EINVAL; } else rc = cap_inode_setxattr(dentry, name, value, size, flags); @@ -644,9 +648,6 @@ static void smack_inode_post_setxattr(struct dentry *dentry, const char *name, if (strcmp(name, XATTR_NAME_SMACK)) return; - if (size >= SMK_LABELLEN) - return; - isp = dentry->d_inode->i_security; /* -- cgit v0.10.2 From 96f15efcea94545987715f453a8c2b8ea592d000 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 17 Apr 2009 23:32:20 -0400 Subject: ACPI: Disable _GTS and _BFS support by default Executing BIOS code paths not exercised by Windows tends to get Linux into trouble. However, if a system does benefit from _GTS or _BFS, acpi.gts=1 an acpi.bfs=1 are now available to enable them. http://bugzilla.kernel.org/show_bug.cgi?id=13041 Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index baa5fc0..db307a3 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -211,6 +211,12 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) +static unsigned int gts, bfs; +module_param(gts, uint, 0644); +module_param(bfs, uint, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); + /******************************************************************************* * * FUNCTION: acpi_enter_sleep_state @@ -278,16 +284,18 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } - /* Execute the _GTS method */ + if (gts) { + /* Execute the _GTS method */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); + status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + return_ACPI_STATUS(status); + } } /* Get current value of PM1A control */ @@ -513,18 +521,19 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) } } - /* Execute the _BFS method */ + if (bfs) { + /* Execute the _BFS method */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); + status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); + } } - return_ACPI_STATUS(status); } diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 779e4e5..9042875 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -713,6 +713,32 @@ static void acpi_power_off(void) acpi_enter_sleep_state(ACPI_STATE_S5); } +/* + * ACPI 2.0 created the optional _GTS and _BFS, + * but industry adoption has been neither rapid nor broad. + * + * Linux gets into trouble when it executes poorly validated + * paths through the BIOS, so disable _GTS and _BFS by default, + * but do speak up and offer the option to enable them. + */ +void __init acpi_gts_bfs_check(void) +{ + acpi_handle dummy; + + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy))) + { + printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); + printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " + "please notify linux-acpi@vger.kernel.org\n"); + } + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy))) + { + printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); + printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " + "please notify linux-acpi@vger.kernel.org\n"); + } +} + int __init acpi_sleep_init(void) { acpi_status status; @@ -771,5 +797,6 @@ int __init acpi_sleep_init(void) * object can also be evaluated when the system enters S5. */ register_reboot_notifier(&tts_notifier); + acpi_gts_bfs_check(); return 0; } -- cgit v0.10.2 From 0f751719e4e689efbe537233552e5f0529ecb8ce Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Fri, 17 Apr 2009 20:35:57 -0700 Subject: Input: omap-keypad - use disable_irq_nosync() in irq handler disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 058fa8b..87ec7b1 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -100,8 +100,20 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) /* disable keyboard interrupt and schedule for handling */ if (cpu_is_omap24xx()) { int i; - for (i = 0; i < omap_kp->rows; i++) - disable_irq(gpio_to_irq(row_gpios[i])); + + for (i = 0; i < omap_kp->rows; i++) { + int gpio_irq = gpio_to_irq(row_gpios[i]); + /* + * The interrupt which we're currently handling should + * be disabled _nosync() to avoid deadlocks waiting + * for this handler to complete. All others should + * be disabled the regular way for SMP safety. + */ + if (gpio_irq == irq) + disable_irq_nosync(gpio_irq); + else + disable_irq(gpio_irq); + } } else /* disable keyboard interrupt and schedule for handling */ omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); -- cgit v0.10.2 From e4bd3e591c8cc52ccf7a0b27f33aa7a5a19058d7 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Fri, 17 Apr 2009 20:35:57 -0700 Subject: Input: sa1111ps2 - use disable_irq_nosync() in irq handlers disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index 57953c0..f412c69 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -77,7 +77,7 @@ static irqreturn_t ps2_txint(int irq, void *dev_id) spin_lock(&ps2if->lock); status = sa1111_readl(ps2if->base + SA1111_PS2STAT); if (ps2if->head == ps2if->tail) { - disable_irq(irq); + disable_irq_nosync(irq); /* done */ } else if (status & PS2STAT_TXE) { sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA); -- cgit v0.10.2 From 29fa98bd9b50b5e9c17d99e961640ffafb765d71 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Fri, 17 Apr 2009 20:35:57 -0700 Subject: Input: tsc2007 - use disable_irq_nosync() in irq handler disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 4ab0702..536668f 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -235,7 +235,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle) spin_lock_irqsave(&ts->lock, flags); if (likely(ts->get_pendown_state())) { - disable_irq(ts->irq); + disable_irq_nosync(ts->irq); hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), HRTIMER_MODE_REL); } -- cgit v0.10.2 From 3deb649e654ff87b87de9e415ac43ca8afbdff07 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Fri, 17 Apr 2009 20:35:58 -0700 Subject: Input: ucb1400 - use disable_irq_nosync() in irq handler disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index e868264..f100c7f 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -256,7 +256,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid) struct ucb1400_ts *ucb = devid; if (irqnr == ucb->irq) { - disable_irq(ucb->irq); + disable_irq_nosync(ucb->irq); ucb->irq_pending = 1; wake_up(&ucb->ts_wait); return IRQ_HANDLED; -- cgit v0.10.2 From 67405439bca28c4dbecd3fefd97fbdb282a302d9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 14 Apr 2009 20:16:45 +0100 Subject: thermal: Fix polling frequency for systems without passive cooling The polling interval (in deciseconds) was accidently interpreted as being in milliseconds in one codepath, resulting in excessively frequent polling. Ensure that the conversion is performed. Signed-off-by: Matthew Garrett Acked-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 9cd15e8..564ea14 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -909,7 +909,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) thermal_zone_device_register("acpitz", trips, tz, &acpi_thermal_zone_ops, 0, 0, 0, - tz->polling_frequency); + tz->polling_frequency*100); if (IS_ERR(tz->thermal_zone)) return -ENODEV; -- cgit v0.10.2 From 406e988bef742aa74cdc1f5fafc812ecebf7c02b Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:10 +0000 Subject: thinkpad-acpi: silence hotkey enable warning for module parameter Avoid the WARN() when the procfs handler for hotkey enable is used by a module parameter. Instead, urge the user to stop doing that. Reported-by: Niel Lambrechts Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a40b075..a186c5b 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -2946,12 +2946,18 @@ static int hotkey_read(char *p) return len; } -static void hotkey_enabledisable_warn(void) +static void hotkey_enabledisable_warn(bool enable) { tpacpi_log_usertask("procfs hotkey enable/disable"); - WARN(1, TPACPI_WARN - "hotkey enable/disable functionality has been " - "removed from the driver. Hotkeys are always enabled.\n"); + if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable), + TPACPI_WARN + "hotkey enable/disable functionality has been " + "removed from the driver. Hotkeys are always " + "enabled\n")) + printk(TPACPI_ERR + "Please remove the hotkey=enable module " + "parameter, it is deprecated. Hotkeys are always " + "enabled\n"); } static int hotkey_write(char *buf) @@ -2971,9 +2977,9 @@ static int hotkey_write(char *buf) res = 0; while ((cmd = next_cmd(&buf))) { if (strlencmp(cmd, "enable") == 0) { - hotkey_enabledisable_warn(); + hotkey_enabledisable_warn(1); } else if (strlencmp(cmd, "disable") == 0) { - hotkey_enabledisable_warn(); + hotkey_enabledisable_warn(0); res = -EPERM; } else if (strlencmp(cmd, "reset") == 0) { mask = hotkey_orig_mask; -- cgit v0.10.2 From 75bd3bf2ade9d548be0d2bde60b5ee0fdce0b127 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:11 +0000 Subject: thinkpad-acpi: fix LED blinking through timer trigger The set_blink hook code in the LED subdriver would never manage to get a LED to blink, and instead it would just turn it on. The consequence of this is that the "timer" trigger would not cause the LED to blink if given default parameters. This problem exists since 2.6.26-rc1. To fix it, switch the deferred LED work handling to use the thinkpad-acpi-specific LED status (off/on/blink) directly. This also makes the code easier to read, and to extend later. Signed-off-by: Henrique de Moraes Holschuh Cc: stable@kernel.org Signed-off-by: Len Brown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a186c5b..a1d2abc 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -303,11 +303,17 @@ static u32 dbg_level; static struct workqueue_struct *tpacpi_wq; +enum led_status_t { + TPACPI_LED_OFF = 0, + TPACPI_LED_ON, + TPACPI_LED_BLINK, +}; + /* Special LED class that can defer work */ struct tpacpi_led_classdev { struct led_classdev led_classdev; struct work_struct work; - enum led_brightness new_brightness; + enum led_status_t new_state; unsigned int led; }; @@ -4213,7 +4219,7 @@ static void light_set_status_worker(struct work_struct *work) container_of(work, struct tpacpi_led_classdev, work); if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING)) - light_set_status((data->new_brightness != LED_OFF)); + light_set_status((data->new_state != TPACPI_LED_OFF)); } static void light_sysfs_set(struct led_classdev *led_cdev, @@ -4223,7 +4229,8 @@ static void light_sysfs_set(struct led_classdev *led_cdev, container_of(led_cdev, struct tpacpi_led_classdev, led_classdev); - data->new_brightness = brightness; + data->new_state = (brightness != LED_OFF) ? + TPACPI_LED_ON : TPACPI_LED_OFF; queue_work(tpacpi_wq, &data->work); } @@ -4730,12 +4737,6 @@ enum { /* For TPACPI_LED_OLD */ TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ }; -enum led_status_t { - TPACPI_LED_OFF = 0, - TPACPI_LED_ON, - TPACPI_LED_BLINK, -}; - static enum led_access_mode led_supported; TPACPI_HANDLE(led, ec, "SLED", /* 570 */ @@ -4847,23 +4848,13 @@ static int led_set_status(const unsigned int led, return rc; } -static void led_sysfs_set_status(unsigned int led, - enum led_brightness brightness) -{ - led_set_status(led, - (brightness == LED_OFF) ? - TPACPI_LED_OFF : - (tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ? - TPACPI_LED_BLINK : TPACPI_LED_ON); -} - static void led_set_status_worker(struct work_struct *work) { struct tpacpi_led_classdev *data = container_of(work, struct tpacpi_led_classdev, work); if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING)) - led_sysfs_set_status(data->led, data->new_brightness); + led_set_status(data->led, data->new_state); } static void led_sysfs_set(struct led_classdev *led_cdev, @@ -4872,7 +4863,13 @@ static void led_sysfs_set(struct led_classdev *led_cdev, struct tpacpi_led_classdev *data = container_of(led_cdev, struct tpacpi_led_classdev, led_classdev); - data->new_brightness = brightness; + if (brightness == LED_OFF) + data->new_state = TPACPI_LED_OFF; + else if (tpacpi_led_state_cache[data->led] != TPACPI_LED_BLINK) + data->new_state = TPACPI_LED_ON; + else + data->new_state = TPACPI_LED_BLINK; + queue_work(tpacpi_wq, &data->work); } @@ -4890,7 +4887,7 @@ static int led_sysfs_blink_set(struct led_classdev *led_cdev, } else if ((*delay_on != 500) || (*delay_off != 500)) return -EINVAL; - data->new_brightness = TPACPI_LED_BLINK; + data->new_state = TPACPI_LED_BLINK; queue_work(tpacpi_wq, &data->work); return 0; -- cgit v0.10.2 From f68f53a217b827580647d23fdc34eecdcb3739c6 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:12 +0000 Subject: thinkpad-acpi: fix use of MODULE_AUTHOR Fix the module to use one instance of MODULE_AUTHOR per author. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a1d2abc..7a7cac2 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7883,7 +7883,8 @@ IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]"); IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]"); IBM_BIOS_MODULE_ALIAS("K[UX-Z]"); -MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); +MODULE_AUTHOR("Borislav Deianov "); +MODULE_AUTHOR("Henrique de Moraes Holschuh "); MODULE_DESCRIPTION(TPACPI_DESC); MODULE_VERSION(TPACPI_VERSION); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 922fe097b1e8f2f2f23dbed61cfe6e0316fecff1 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:13 +0000 Subject: thinkpad-acpi: simplify module autoloading Simplify the module autoloading a great deal, by keying to the HID for the HKEY interface. Only _really_ ancient IBM ThinkPad models like the 240, 240x and 570 lack the HKEY interface, and they're getting their own trimmed-down driver one of these days. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 7a7cac2..caa774a 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7861,6 +7861,15 @@ static int __init thinkpad_acpi_module_init(void) MODULE_ALIAS(TPACPI_DRVR_SHORTNAME); /* + * This will autoload the driver in almost every ThinkPad + * in widespread use. + * + * Only _VERY_ old models, like the 240, 240x and 570 lack + * the HKEY event interface. + */ +MODULE_DEVICE_TABLE(acpi, ibm_htk_device_ids); + +/* * DMI matching for module autoloading * * See http://thinkwiki.org/wiki/List_of_DMI_IDs @@ -7872,16 +7881,10 @@ MODULE_ALIAS(TPACPI_DRVR_SHORTNAME); #define IBM_BIOS_MODULE_ALIAS(__type) \ MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*") -/* Non-ancient thinkpads */ -MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*"); -MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*"); - /* Ancient thinkpad BIOSes have to be identified by * BIOS type or model number, and there are far less * BIOS types than model numbers... */ -IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]"); -IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]"); -IBM_BIOS_MODULE_ALIAS("K[UX-Z]"); +IBM_BIOS_MODULE_ALIAS("I[MU]"); /* 570, 570e */ MODULE_AUTHOR("Borislav Deianov "); MODULE_AUTHOR("Henrique de Moraes Holschuh "); -- cgit v0.10.2 From b57f7e7b836d271902b8b7b1ec8cf9312dc5d228 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:14 +0000 Subject: thinkpad-acpi: bump up version to 0.23 Plenty of high-profile changes, so it deserves a new version number. Features added since 0.22: * Restrict unsafe LEDs * New race-less brightness control strategy for IBM ThinkPads * Disclose TGID of driver access from userspace (debug) * Warn when deprecated functions are used Other changes: * Better debug messages in some subdrivers * Removed "hotkey disable" support, since it breaks the driver * Dropped "ibm-acpi" alias Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 3d76507..e7e9a690 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.22 - November 23rd, 2008 + Version 0.23 + April 10th, 2009 Borislav Deianov Henrique de Moraes Holschuh diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index caa774a..912be65 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define TPACPI_VERSION "0.22" +#define TPACPI_VERSION "0.23" #define TPACPI_SYSFS_VERSION 0x020300 /* -- cgit v0.10.2 From 0300e7f1a525ae4e4ac05344624adf0e5f13ea52 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 17 Apr 2009 08:33:52 -0400 Subject: lockdep, x86: account for irqs enabled in paranoid_exit I hit the check_flags error of lockdep: WARNING: at kernel/lockdep.c:2893 check_flags+0x1a7/0x1d0() [...] hardirqs last enabled at (12567): [] local_bh_enable+0xaa/0x110 hardirqs last disabled at (12569): [] int3+0x16/0x40 softirqs last enabled at (12566): [] lock_sock_nested+0xfb/0x110 softirqs last disabled at (12568): [] tcp_prequeue_process+0x2e/0xa0 The check_flags warning of lockdep tells me that lockdep thought interrupts were disabled, but they were really enabled. The numbers in the above parenthesis show the order of events: 12566: softirqs last enabled: lock_sock_nested 12567: hardirqs last enabled: local_bh_enable 12568: softirqs last disabled: tcp_prequeue_process 12566: hardirqs last disabled: int3 int3 is a breakpoint! Examining this further, I have CONFIG_NET_TCPPROBE enabled which adds break points into the kernel. The paranoid_exit of the return of int3 does not account for enabling interrupts on return to kernel. This code is a bit tricky since it is also used by the nmi handler (when lockdep is off), and we must be careful about the swapgs. We can not call kernel code after the swapgs has been performed. [ Impact: fix lockdep check_flags warning + self-turn-off ] Acked-by: Peter Zijlsta Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index a331ec3..38946c6 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1410,7 +1410,10 @@ ENTRY(paranoid_exit) paranoid_swapgs: TRACE_IRQS_IRETQ 0 SWAPGS_UNSAFE_STACK + RESTORE_ALL 8 + jmp irq_return paranoid_restore: + TRACE_IRQS_IRETQ 0 RESTORE_ALL 8 jmp irq_return paranoid_userspace: -- cgit v0.10.2 From 8b5b94e4e9813cdd77103827f48d58c806ab45c6 Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 17 Apr 2009 16:42:12 +0800 Subject: docs, x86: add nox2apic back to kernel-parameters.txt "nox2apic" was removed from kernel-parameters.txt by mistake, when entries were sorted in alpha order (commit 0cb55ad2). But this early parameter is still there, add it back to kernel-parameters.txt. [ Impact: add boot parameter description ] Signed-off-by: Suresh Siddha Signed-off-by: Weidong Han Cc: Randy Dunlap Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-2-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a19f021..9e4fe72 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1588,6 +1588,8 @@ and is between 256 and 4096 characters. It is defined in the file nowb [ARM] + nox2apic [X86-64,APIC] Do not enable x2APIC mode. + nptcg= [IA64] Override max number of concurrent global TLB purges which is reported from either PAL_VM_SUMMARY or SAL PALO. -- cgit v0.10.2 From 516ef69f160fb2f092d71f2cb635a9394ff8a71a Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sat, 18 Apr 2009 10:11:53 +0100 Subject: ASoC: Fix warning in wm9705 I notice that the fixes were merged, minus one: sound/soc/codecs/wm9705.c: At top level: sound/soc/codecs/wm9705.c:445: warning: initialization from incompatible pointer type so you might find this trivial patch useful. Signed-off-by: Russell King Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c index 6e23a81..c2d1a7a 100644 --- a/sound/soc/codecs/wm9705.c +++ b/sound/soc/codecs/wm9705.c @@ -318,7 +318,7 @@ static int wm9705_reset(struct snd_soc_codec *codec) } #ifdef CONFIG_PM -static int wm9705_soc_suspend(struct platform_device *pdev) +static int wm9705_soc_suspend(struct platform_device *pdev, pm_message_t msg) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = socdev->card->codec; -- cgit v0.10.2 From c018f1ee5cf81e58b93d9e93a2ee39cad13dc1ac Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 18 Apr 2009 17:42:19 +0200 Subject: hpt366: fix HPT370 DMA timeouts The big driver change in 2.4.19-rc1 introduced a regression for many HPT370[A] chips -- DMA stopped to work completely, only causing endless timeouts... The culprit has been identified (at last!): it turned to be the code resetting the DMA state machine before each transfer. Stop doing it now as this counter- measure has clearly caused more harm than good. This should fix the kernel.org bug #7703. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index a0eb87f..cea1ac2 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -114,6 +114,8 @@ * the register setting lists into the table indexed by the clock selected * - set the correct hwif->ultra_mask for each individual chip * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards + * - stop resetting HPT370's state machine before each DMA transfer as that has + * caused more harm than good * Sergei Shtylyov, or */ @@ -133,7 +135,7 @@ #define DRV_NAME "hpt366" /* various tuning parameters */ -#define HPT_RESET_STATE_ENGINE +#undef HPT_RESET_STATE_ENGINE #undef HPT_DELAY_INTERRUPT static const char *quirk_drives[] = { -- cgit v0.10.2 From 59c8d04f5ee97ea46da854e9adbbaa45d988c39d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 18 Apr 2009 17:42:19 +0200 Subject: hpt366: use ATA_DMA_* constants Use ATA_DMA_* constants instead of the bare numbers for the BMIDE register bits. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index cea1ac2..0feb66c 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -3,7 +3,7 @@ * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc * Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * Portions Copyright (C) 2005-2008 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. * * Thanks to HighPoint Technologies for their assistance, and hardware. * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his @@ -810,7 +810,7 @@ static void hpt370_irq_timeout(ide_drive_t *drive) /* get DMA command mode */ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); /* stop DMA */ - outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD); + outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD); hpt370_clear_engine(drive); } @@ -827,11 +827,11 @@ static int hpt370_dma_end(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - if (dma_stat & 0x01) { + if (dma_stat & ATA_DMA_ACTIVE) { /* wait a little */ udelay(20); dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); - if (dma_stat & 0x01) + if (dma_stat & ATA_DMA_ACTIVE) hpt370_irq_timeout(drive); } return ide_dma_end(drive); @@ -853,7 +853,7 @@ static int hpt374_dma_test_irq(ide_drive_t *drive) dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); /* return 1 if INTR asserted */ - if (dma_stat & 4) + if (dma_stat & ATA_DMA_INTR) return 1; return 0; -- cgit v0.10.2 From d5f840bf74c09ca5a31e518c9d984999926b5f44 Mon Sep 17 00:00:00 2001 From: Jack Stone Date: Sat, 18 Apr 2009 17:42:19 +0200 Subject: ide: Remove void casts Remove uneeded void casts Signed-off-by: Jack Stone Cc: jeff@garzik.org Cc: kernel-janitors@vger.kernel.org Cc: Jack Stone Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 052b9bf..f76e4e6 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -1682,7 +1682,7 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, * The +2 is +1 for the stop command and +1 to allow for * aligning the start address to a multiple of 16 bytes. */ - pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent( + pmif->dma_table_cpu = pci_alloc_consistent( dev, (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd), &hwif->dmatable_dma); -- cgit v0.10.2 From f505d49ffd25ed062e76ffd17568d3937fcd338c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 18 Apr 2009 17:42:20 +0200 Subject: ide: fix barriers support Freeing non-slab objects is bad and results in an oops. Fix it. Reported-and-tested-by: Andrew Price Cc: Theodore Tso Cc: "Rafael J. Wysocki" Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 2ae02b8..35dc38d 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -102,11 +102,14 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) drive->dev_flags |= IDE_DFLAG_PARKED; } - if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE) - memcpy(rq->special, cmd, sizeof(*cmd)); + if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { + struct ide_cmd *orig_cmd = rq->special; - if (cmd->tf_flags & IDE_TFLAG_DYN) - kfree(cmd); + if (cmd->tf_flags & IDE_TFLAG_DYN) + kfree(orig_cmd); + else + memcpy(orig_cmd, cmd, sizeof(*cmd)); + } } /* obsolete, blk_rq_bytes() should be used instead */ -- cgit v0.10.2 From 15da90b516e9da92cc1d90001e640fd6707d0e27 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 18 Apr 2009 17:42:20 +0200 Subject: cs5536: define dma_sff_read_status() method The driver somehow got merged with the initializer for the dma_sff_read_status() method missing which caused kernel panic on bootup. This should fix the kernel.org bug #13026... Signed-off-by: Sergei Shtylyov Reported-by: Arnd Hannemann Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c index 353a35b..0332a95 100644 --- a/drivers/ide/cs5536.c +++ b/drivers/ide/cs5536.c @@ -236,6 +236,7 @@ static const struct ide_dma_ops cs5536_dma_ops = { .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, .dma_timer_expiry = ide_dma_sff_timer_expiry, + .dma_sff_read_status = ide_dma_sff_read_status, }; static const struct ide_port_info cs5536_info = { -- cgit v0.10.2 From a21e25536169432cf9174d631972bc1cd4c75062 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 18 Apr 2009 17:23:41 +0200 Subject: PM/Hibernate: Fix memory shrinking Commit d979677c4c0 ("mm: shrink_all_memory(): use sc.nr_reclaimed") broke the memory shrinking used by hibernation, becuse it did not update shrink_all_zones() in accordance with the other changes it made. Fix this by making shrink_all_zones() update sc->nr_reclaimed instead of overwriting its value. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13058 Reported-and-tested-by: Alan Jenkins Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 39fdfb1..99155b7 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2088,13 +2088,13 @@ static void shrink_all_zones(unsigned long nr_pages, int prio, nr_reclaimed += shrink_list(l, nr_to_scan, zone, sc, prio); if (nr_reclaimed >= nr_pages) { - sc->nr_reclaimed = nr_reclaimed; + sc->nr_reclaimed += nr_reclaimed; return; } } } } - sc->nr_reclaimed = nr_reclaimed; + sc->nr_reclaimed += nr_reclaimed; } /* @@ -2115,6 +2115,7 @@ unsigned long shrink_all_memory(unsigned long nr_pages) .may_unmap = 0, .may_writepage = 1, .isolate_pages = isolate_pages_global, + .nr_reclaimed = 0, }; current->reclaim_state = &reclaim_state; -- cgit v0.10.2 From 4af94f39004a0d1a074e7573457e238a29557848 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 17 Apr 2009 18:30:28 -0700 Subject: doc: fix kernel-parameters.txt mistaken deletions Re-add missing kernel-parameters documentation that was accidentally deleted in commit 0cb55ad2. Thanks to Ingo and Weidong Han for the heads-up on this. Signed-off-by: Randy Dunlap cc: Ingo Molnar cc: Len Brown Signed-off-by: Linus Torvalds diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a19f021..600cdd7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -231,6 +231,35 @@ and is between 256 and 4096 characters. It is defined in the file power state again in power transition. 1 : disable the power state check + acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode + Format: { level | edge | high | low } + + acpi_serialize [HW,ACPI] force serialization of AML methods + + acpi_skip_timer_override [HW,ACPI] + Recognize and ignore IRQ0/pin2 Interrupt Override. + For broken nForce2 BIOS resulting in XT-PIC timer. + + acpi_sleep= [HW,ACPI] Sleep options + Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, + old_ordering, s4_nonvs } + See Documentation/power/video.txt for information on + s3_bios and s3_mode. + s3_beep is for debugging; it makes the PC's speaker beep + as soon as the kernel's real-mode entry point is called. + s4_nohwsig prevents ACPI hardware signature from being + used during resume from hibernation. + old_ordering causes the ACPI 1.0 ordering of the _PTS + control method, with respect to putting devices into + low power states, to be enforced (the ACPI 2.0 ordering + of _PTS is used by default). + s4_nonvs prevents the kernel from saving/restoring the + ACPI NVS memory during hibernation. + + acpi_use_timer_override [HW,ACPI] + Use timer override. For some broken Nvidia NF5 boards + that require a timer override, but don't have HPET + acpi_enforce_resources= [ACPI] { strict | lax | no } Check for resource conflicts between native drivers @@ -250,6 +279,9 @@ and is between 256 and 4096 characters. It is defined in the file ad1848= [HW,OSS] Format: ,,,, + add_efi_memmap [EFI; X86] Include EFI memory map in + kernel's map of available physical RAM. + advansys= [HW,SCSI] See header of drivers/scsi/advansys.c. @@ -1838,6 +1870,12 @@ and is between 256 and 4096 characters. It is defined in the file autoconfiguration. Ranges are in pairs (memory base and size). + ports= [IP_VS_FTP] IPVS ftp helper module + Default is 21. + Up to 8 (IP_VS_APP_MAX_PORTS) ports + may be specified. + Format: ,.... + print-fatal-signals= [KNL] debug: print fatal signals print-fatal-signals=1: print segfault info to -- cgit v0.10.2 From 3f8c0df43dec51fbdfb2627f7574aa00a5fce98c Mon Sep 17 00:00:00 2001 From: Arjan Opmeer Date: Sat, 18 Apr 2009 19:05:40 -0700 Subject: Input: elantech - provide a workaround for jumpy cursor on firmware 2.34 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It seems that Elantech touchpad firmware version 2.34 on the Hercules eCAFÉ suffers from a problem where bogus coordinates get reported at the beginning of a touch action. This causes the mouse cursor or the scrolled page to jump. Included patch provides a workaround that discards mouse packets that are likely to contain bogus coordinates. The workaround is activated when we detect touchpad with fimware version 2.34. Signed-off-by: Arjan Opmeer Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 6ab0eb1a..d3b5916 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer + * Copyright (C) 2007-2009 Arjan Opmeer * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; int fingers; + static int old_fingers; if (etd->fw_version_maj == 0x01) { /* byte 0: D U p1 p2 1 p3 R L @@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) fingers = (packet[0] & 0xc0) >> 6; } + if (etd->jumpy_cursor) { + /* Discard packets that are likely to have bogus coordinates */ + if (fingers > old_fingers) { + elantech_debug("elantech.c: discarding packet\n"); + goto discard_packet_v1; + } + } + input_report_key(dev, BTN_TOUCH, fingers != 0); /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 @@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) } input_sync(dev); + + discard_packet_v1: + old_fingers = fingers; } /* @@ -662,6 +674,17 @@ int elantech_init(struct psmouse *psmouse) param[0], param[1], param[2]); etd->capabilities = param[0]; + /* + * This firmware seems to suffer from misreporting coordinates when + * a touch action starts causing the mouse cursor or scrolled page + * to jump. Enable a workaround. + */ + if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) { + pr_info("elantech.c: firmware version 2.34 detected, " + "enabling jumpy cursor workaround\n"); + etd->jumpy_cursor = 1; + } + if (elantech_set_absolute_mode(psmouse)) { pr_err("elantech.c: failed to put touchpad into absolute mode.\n"); goto init_fail; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index bee282b..ed848cc 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer + * Copyright (C) 2007-2009 Arjan Opmeer * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -104,6 +104,7 @@ struct elantech_data { unsigned char fw_version_min; unsigned char hw_version; unsigned char paritycheck; + unsigned char jumpy_cursor; unsigned char parity[256]; }; -- cgit v0.10.2 From b2546df69b6bef19513112fd54ffb5d37cb3eb7a Mon Sep 17 00:00:00 2001 From: Arjan Opmeer Date: Sat, 18 Apr 2009 19:10:17 -0700 Subject: Input: elantech - make sure touchpad is really in absolute mode There exist laptops with Elantech touchpads where switching to absolute mode does not happen, although writing the configuration register succeeds without error. Reading back the register afterwards reveils that the absolute mode bit is not set as if masked out by the touchpad firmware. Always read back register 0x10, make sure that for hardware version 1 the absolute mode bit is actually set and fail otherwise. This prevents the case where the touchpad is claimed by the Elantech driver but is nonetheless not working. Signed-off-by: Arjan Opmeer Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index d3b5916..4bc78892 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -375,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) rc = -1; break; } + } + + if (rc == 0) { /* - * Read back reg 0x10. The touchpad is probably initalising - * and not ready until we read back the value we just wrote. + * Read back reg 0x10. For hardware version 1 we must make + * sure the absolute mode bit is set. For hardware version 2 + * the touchpad is probably initalising and not ready until + * we read back the value we just wrote. */ do { rc = elantech_read_reg(psmouse, 0x10, &val); @@ -385,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) break; tries--; elantech_debug("elantech.c: retrying read (%d).\n", - tries); + tries); msleep(ETP_READ_BACK_DELAY); } while (tries > 0); - if (rc) + + if (rc) { pr_err("elantech.c: failed to read back register 0x10.\n"); - break; + } else if (etd->hw_version == 1 && + !(val & ETP_R10_ABSOLUTE_MODE)) { + pr_err("elantech.c: touchpad refuses " + "to switch to absolute mode.\n"); + rc = -1; + } } if (rc) -- cgit v0.10.2 From ff54250a0ebab7f90a5f848a0ba63f999830c872 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 18 Apr 2009 21:44:24 -0700 Subject: Remove 'recurse into child resources' logic from 'reserve_region_with_split()' This function is not actually used right now, since the original use case for it was done with insert_resource_expand_to_fit() instead. However, we now have another usage case that wants to basically do a "reserve IO resource, splitting around existing resources", however that one doesn't actually want the "recurse into the conflicting resource" logic at all. And since recursing into the conflicting resource was the most complex part, and isn't wanted, just remove it. Maybe we'll some day want both versions, but we can just resurrect the logic then. Tested-by: Yinghai Lu Signed-off-by: Linus Torvalds diff --git a/kernel/resource.c b/kernel/resource.c index fd5d7d5..ac5f3a3 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -533,43 +533,21 @@ static void __init __reserve_region_with_split(struct resource *root, res->end = end; res->flags = IORESOURCE_BUSY; - for (;;) { - conflict = __request_resource(parent, res); - if (!conflict) - break; - if (conflict != parent) { - parent = conflict; - if (!(conflict->flags & IORESOURCE_BUSY)) - continue; - } - - /* Uhhuh, that didn't work out.. */ - kfree(res); - res = NULL; - break; - } - - if (!res) { - /* failed, split and try again */ - - /* conflict covered whole area */ - if (conflict->start <= start && conflict->end >= end) - return; + conflict = __request_resource(parent, res); + if (!conflict) + return; - if (conflict->start > start) - __reserve_region_with_split(root, start, conflict->start-1, name); - if (!(conflict->flags & IORESOURCE_BUSY)) { - resource_size_t common_start, common_end; + /* failed, split and try again */ + kfree(res); - common_start = max(conflict->start, start); - common_end = min(conflict->end, end); - if (common_start < common_end) - __reserve_region_with_split(root, common_start, common_end, name); - } - if (conflict->end < end) - __reserve_region_with_split(root, conflict->end+1, end, name); - } + /* conflict covered whole area */ + if (conflict->start <= start && conflict->end >= end) + return; + if (conflict->start > start) + __reserve_region_with_split(root, start, conflict->start-1, name); + if (conflict->end < end) + __reserve_region_with_split(root, conflict->end+1, end, name); } void __init reserve_region_with_split(struct resource *root, -- cgit v0.10.2 From f14875a3e0cc35d7dbe15ee39763a6ae922e7034 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 18 Apr 2009 23:51:08 +0200 Subject: kbuild: support include/generated We need a location for generated files. Today they are spread over several places and bringing them together to a common place makes it obvious hat is generated and what isreal files. Al Viro originally suggested: include/gen Linus suggested to spell it out. This patch implement support for include/generated All files in include/generated are ignored by git. include/generated is removed during "make mrproper". With this we are ready to implement support for include/generated in the various architctures and in the base kernel. Signed-off-by: Sam Ravnborg Cc: Al Viro Cc: Linus Torvalds diff --git a/.gitignore b/.gitignore index 869e1a3..51bd99d 100644 --- a/.gitignore +++ b/.gitignore @@ -49,6 +49,7 @@ include/linux/compile.h include/linux/version.h include/linux/utsrelease.h include/linux/bounds.h +include/generated # stgit generated dirs patches-* diff --git a/Makefile b/Makefile index bfdef56..6f4208f 100644 --- a/Makefile +++ b/Makefile @@ -1200,7 +1200,7 @@ CLEAN_FILES += vmlinux System.map \ .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map # Directories & files removed with 'make mrproper' -MRPROPER_DIRS += include/config include2 usr/include +MRPROPER_DIRS += include/config include2 usr/include include/generated MRPROPER_FILES += .config .config.old include/asm .version .old_version \ include/linux/autoconf.h include/linux/version.h \ include/linux/utsrelease.h \ -- cgit v0.10.2 From 720097d895956c0bf15b8440f7845159a04b74da Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 19 Apr 2009 11:04:26 +0200 Subject: kbuild: introduce subdir-ccflags-y Following patch introduce support for setting options to gcc that has effect for current directory and all subdirectories. The typical use case are an architecture or a subsystem that decide to cover all files with -Werror. Today alpha, mips and sparc uses -Werror in almost all their Makefile- with subdir-ccflag-y it is now simpler to do so as only the top-level directories needs to be covered. Likewise if we decide to cover a full subsystem such as net/ with -Werror this is done by adding a single line to net/Makefile. Signed-off-by: Sam Ravnborg Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Thomas Gleixner diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index d4b0567..d76cfd8 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -316,6 +316,16 @@ more details, with real examples. #arch/m68k/fpsp040/Makefile ldflags-y := -x + subdir-ccflags-y, subdir-asflags-y + The two flags listed above are similar to ccflags-y and as-falgs-y. + The difference is that the subdir- variants has effect for the kbuild + file where tey are present and all subdirectories. + Options specified using subdir-* are added to the commandline before + the options specified using the non-subdir variants. + + Example: + subdir-ccflags-y := -Werror + CFLAGS_$@, AFLAGS_$@ CFLAGS_$@ and AFLAGS_$@ only apply to commands in current diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 39a9642..5c4b7a4 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -27,6 +27,9 @@ ccflags-y := cppflags-y := ldflags-y := +subdir-asflags-y := +subdir-ccflags-y := + # Read auto.conf if it exists, otherwise ignore -include include/config/auto.conf diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 9796195..cba61ca 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -4,6 +4,11 @@ ccflags-y += $(EXTRA_CFLAGS) cppflags-y += $(EXTRA_CPPFLAGS) ldflags-y += $(EXTRA_LDFLAGS) +# +# flags that take effect in sub directories +export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y) +export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y) + # Figure out what we need to build from the various variables # =========================================================================== @@ -104,10 +109,10 @@ else debug_flags = endif -orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) \ +orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \ $(ccflags-y) $(CFLAGS_$(basetarget).o) _c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags)) -_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) \ +_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \ $(asflags-y) $(AFLAGS_$(basetarget).o) _cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F)) -- cgit v0.10.2 From 88df781afb788fa588dbf2e77f205214022a8893 Mon Sep 17 00:00:00 2001 From: Matias Zabaljauregui Date: Wed, 8 Apr 2009 17:58:39 -0300 Subject: lguest: fix crash on vmlinux images Typical message: 'lguest: unhandled trap 6 at 0x418726 (0x0)' vmlinux guests were broken by 4cd8b5e2a159f18a1507f1187b44a1acbfa6341b 'lguest: use KVM hypercalls', which rewrites guest text from kvm hypercalls to trap 31. The Launcher mmaps the kernel image. The Guest executes and immediately faults in the first text page (read-only). Then it hits a hypercall, and we rewrite that hypercall, causing a copy-on-write. But the Guest pagetables still refer to the old page: we fault again, but as Host we see the hypercall already rewritten, and pass the fault back to the Guest. The Guest hasn't set up an IDT yet, so we kill it. This doesn't happen with bzImages: they unpack themselves and so the text pages are already read-write. Signed-off-by: Rusty Russell Tested-by: Patrick McHardy diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index a6b7176..d6d7ac0 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -324,6 +324,11 @@ static void rewrite_hypercall(struct lg_cpu *cpu) u8 insn[3] = {0xcd, 0x1f, 0x90}; __lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn)); + /* The above write might have caused a copy of that page to be made + * (if it was read-only). We need to make sure the Guest has + * up-to-date pagetables. As this doesn't happen often, we can just + * drop them all. */ + guest_pagetable_clear_all(cpu); } static bool is_hypercall(struct lg_cpu *cpu) -- cgit v0.10.2 From a489f0b555b753f9df8ddc24c7e74f657ef7ee7b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sun, 19 Apr 2009 23:14:00 -0600 Subject: lguest: fix guest crash on non-linear addresses in gdt pvops Fixes guest crash 'lguest: bad read address 0x4800000 len 256' The new per-cpu allocator ends up handing a non-linear address to write_gdt_entry. We do __pa() on it, and hand it to the host, which kills us. I've long wanted to make the hypercall "LOAD_GDT_ENTRY" to match the IDT code, but had no pressing reason until now. Signed-off-by: Rusty Russell Cc: lguest@ozlabs.org diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h index 0f4ee71..faae199 100644 --- a/arch/x86/include/asm/lguest_hcall.h +++ b/arch/x86/include/asm/lguest_hcall.h @@ -5,7 +5,6 @@ #define LHCALL_FLUSH_ASYNC 0 #define LHCALL_LGUEST_INIT 1 #define LHCALL_SHUTDOWN 2 -#define LHCALL_LOAD_GDT 3 #define LHCALL_NEW_PGTABLE 4 #define LHCALL_FLUSH_TLB 5 #define LHCALL_LOAD_IDT_ENTRY 6 @@ -17,6 +16,7 @@ #define LHCALL_SET_PMD 15 #define LHCALL_LOAD_TLS 16 #define LHCALL_NOTIFY 17 +#define LHCALL_LOAD_GDT_ENTRY 18 #define LGUEST_TRAP_ENTRY 0x1F diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index e94a11e..a208536 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -273,15 +273,15 @@ static void lguest_load_idt(const struct desc_ptr *desc) * controls the entire thing and the Guest asks it to make changes using the * LOAD_GDT hypercall. * - * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY - * hypercall and use that repeatedly to load a new IDT. I don't think it - * really matters, but wouldn't it be nice if they were the same? Wouldn't - * it be even better if you were the one to send the patch to fix it? + * This is the exactly like the IDT code. */ static void lguest_load_gdt(const struct desc_ptr *desc) { - BUG_ON((desc->size + 1) / 8 != GDT_ENTRIES); - kvm_hypercall2(LHCALL_LOAD_GDT, __pa(desc->address), GDT_ENTRIES); + unsigned int i; + struct desc_struct *gdt = (void *)desc->address; + + for (i = 0; i < (desc->size+1)/8; i++) + kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b); } /* For a single GDT entry which changes, we do the lazy thing: alter our GDT, @@ -291,7 +291,9 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum, const void *desc, int type) { native_write_gdt_entry(dt, entrynum, desc, type); - kvm_hypercall2(LHCALL_LOAD_GDT, __pa(dt), GDT_ENTRIES); + /* Tell Host about this new entry. */ + kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, entrynum, + dt[entrynum].a, dt[entrynum].b); } /* OK, I lied. There are three "thread local storage" GDT entries which change diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index ac8a4a3..af92a17 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -158,7 +158,8 @@ void free_interrupts(void); /* segments.c: */ void setup_default_gdt_entries(struct lguest_ro_state *state); void setup_guest_gdt(struct lg_cpu *cpu); -void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num); +void load_guest_gdt_entry(struct lg_cpu *cpu, unsigned int i, + u32 low, u32 hi); void guest_load_tls(struct lg_cpu *cpu, unsigned long tls_array); void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt); void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt); diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c index 4f15439..7ede64f 100644 --- a/drivers/lguest/segments.c +++ b/drivers/lguest/segments.c @@ -144,18 +144,19 @@ void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt) gdt[i] = cpu->arch.gdt[i]; } -/*H:620 This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT). - * We copy it from the Guest and tweak the entries. */ -void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num) +/*H:620 This is where the Guest asks us to load a new GDT entry + * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in. */ +void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi) { /* We assume the Guest has the same number of GDT entries as the * Host, otherwise we'd have to dynamically allocate the Guest GDT. */ if (num > ARRAY_SIZE(cpu->arch.gdt)) kill_guest(cpu, "too many gdt entries %i", num); - /* We read the whole thing in, then fix it up. */ - __lgread(cpu, cpu->arch.gdt, table, num * sizeof(cpu->arch.gdt[0])); - fixup_gdt_table(cpu, 0, ARRAY_SIZE(cpu->arch.gdt)); + /* Set it up, then fix it. */ + cpu->arch.gdt[num].a = lo; + cpu->arch.gdt[num].b = hi; + fixup_gdt_table(cpu, num, num+1); /* Mark that the GDT changed so the core knows it has to copy it again, * even if the Guest is run on the same CPU. */ cpu->changed |= CHANGED_GDT; diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index d6d7ac0..1a83910 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -568,8 +568,8 @@ void __exit lguest_arch_host_fini(void) int lguest_arch_do_hcall(struct lg_cpu *cpu, struct hcall_args *args) { switch (args->arg0) { - case LHCALL_LOAD_GDT: - load_guest_gdt(cpu, args->arg1, args->arg2); + case LHCALL_LOAD_GDT_ENTRY: + load_guest_gdt_entry(cpu, args->arg1, args->arg2, args->arg3); break; case LHCALL_LOAD_IDT_ENTRY: load_guest_idt_entry(cpu, args->arg1, args->arg2, args->arg3); -- cgit v0.10.2 From 84a139a985300901dfad99bd93c7345d180af860 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 16 Apr 2009 21:14:04 -0300 Subject: virtio: fix suspend when using virtio_balloon Break out of wait_event_interruptible() if freezing has been requested, in the vballoon thread. Without this change vballoon refuses to stop and the system can't suspend. Signed-off-by: Marcelo Tosatti Signed-off-by: Rusty Russell Cc: stable@kernel.org diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 5926826..9c76a06 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -190,7 +190,8 @@ static int balloon(void *_vballoon) try_to_freeze(); wait_event_interruptible(vb->config_change, (diff = towards_target(vb)) != 0 - || kthread_should_stop()); + || kthread_should_stop() + || freezing(current)); if (diff > 0) fill_balloon(vb, diff); else if (diff < 0) -- cgit v0.10.2 From 9536c26b31ae34ba6371a1b8f406028e9756f913 Mon Sep 17 00:00:00 2001 From: Matt Kraai Date: Thu, 16 Apr 2009 23:46:20 -0700 Subject: lguest: tell git to ignore Documentation/lguest/lguest This is the example lguest launcher binary. Signed-off-by: Matt Kraai Signed-off-by: Rusty Russell diff --git a/Documentation/lguest/.gitignore b/Documentation/lguest/.gitignore new file mode 100644 index 0000000..115587f --- /dev/null +++ b/Documentation/lguest/.gitignore @@ -0,0 +1 @@ +lguest -- cgit v0.10.2 From 38cfe968040250b89c3554a17219a9fda45b9665 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sun, 19 Apr 2009 23:14:02 -0600 Subject: lguest: document 32-bit and PAE requirements Robert noted that we don't actually document that lguest is 32-bit only, nor that PAE must be off (CONFIG_PAE is now prompted for if HIGHMEM is set to "off). Signed-off-by: Rusty Russell Cc: lguest@ozlabs.org Cc: "Robert P. J. Day" diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt index 29510dc..28c7473 100644 --- a/Documentation/lguest/lguest.txt +++ b/Documentation/lguest/lguest.txt @@ -3,11 +3,11 @@ /, /` - or, A Young Coder's Illustrated Hypervisor \\"--\\ http://lguest.ozlabs.org -Lguest is designed to be a minimal hypervisor for the Linux kernel, for -Linux developers and users to experiment with virtualization with the -minimum of complexity. Nonetheless, it should have sufficient -features to make it useful for specific tasks, and, of course, you are -encouraged to fork and enhance it (see drivers/lguest/README). +Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel, +for Linux developers and users to experiment with virtualization with the +minimum of complexity. Nonetheless, it should have sufficient features to +make it useful for specific tasks, and, of course, you are encouraged to fork +and enhance it (see drivers/lguest/README). Features: @@ -37,6 +37,7 @@ Running Lguest: "Paravirtualized guest support" = Y "Lguest guest support" = Y "High Memory Support" = off/4GB + "PAE (Physical Address Extension) Support" = N "Alignment value to which kernel should be aligned" = 0x100000 (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and CONFIG_PHYSICAL_ALIGN=0x100000) -- cgit v0.10.2 From e91fb9137dd235ab959d7675d0e4104974dad5eb Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 17 Apr 2009 11:37:35 +0200 Subject: [ARM] pxa/palm27x: General fix for Palm27x aSoC driver Firstly, this patch makes the palm27x asoc driver a little more sane. Also, since all affected devices use GPIO95 as AC97_nRESET, this patch sets that properly. Affected are PalmT5, TX and LifeDrive. Signed-off-by: Marek Vasut Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h index 6c4b1f7..58afb30 100644 --- a/arch/arm/mach-pxa/include/mach/palmasoc.h +++ b/arch/arm/mach-pxa/include/mach/palmasoc.h @@ -1,13 +1,8 @@ #ifndef _INCLUDE_PALMASOC_H_ #define _INCLUDE_PALMASOC_H_ + struct palm27x_asoc_info { int jack_gpio; }; -#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X -void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data); -#else -static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {} -#endif - #endif diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index ecf5910..1cec180 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -477,10 +477,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmld_asoc_pdata = { .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmld_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmld_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmld_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -544,6 +556,7 @@ static struct platform_device *devices[] __initdata = { &palmld_backlight, &palmld_leds, &power_supply, + &palmld_asoc, }; static struct map_desc palmld_io_desc[] __initdata = { @@ -573,11 +586,10 @@ static void __init palmld_init(void) set_pxa_fb_info(&palmld_lcd_screen); pxa_set_mci_info(&palmld_mci_platform_data); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&palmld_ac97_pdata); pxa_set_ficp_info(&palmld_ficp_platform_data); pxa_set_keypad_info(&palmld_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index d7f8106..3066236 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -420,10 +420,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmt5_asoc_pdata = { .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmt5_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmt5_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmt5_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -486,6 +498,7 @@ static struct platform_device *devices[] __initdata = { #endif &palmt5_backlight, &power_supply, + &palmt5_asoc, }; /* setup udc GPIOs initial state */ @@ -504,12 +517,11 @@ static void __init palmt5_init(void) set_pxa_fb_info(&palmt5_lcd_screen); pxa_set_mci_info(&palmt5_mci_platform_data); palmt5_udc_init(); + pxa_set_ac97_info(&palmt5_ac97_pdata); pxa_set_udc_info(&palmt5_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmt5_ficp_platform_data); pxa_set_keypad_info(&palmt5_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 14393d0..e2d44b1 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "generic.h" #include "devices.h" @@ -434,6 +435,25 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { }; /****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palmtx_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT, +}; + +static pxa2xx_audio_ops_t palmtx_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmtx_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmtx_asoc_pdata, + }, +}; + +/****************************************************************************** * Framebuffer ******************************************************************************/ static struct pxafb_mode_info palmtx_lcd_modes[] = { @@ -495,6 +515,7 @@ static struct platform_device *devices[] __initdata = { #endif &palmtx_backlight, &power_supply, + &palmtx_asoc, }; static struct map_desc palmtx_io_desc[] __initdata = { @@ -529,8 +550,8 @@ static void __init palmtx_init(void) set_pxa_fb_info(&palmtx_lcd_screen); pxa_set_mci_info(&palmtx_mci_platform_data); palmtx_udc_init(); + pxa_set_ac97_info(&palmtx_ac97_pdata); pxa_set_udc_info(&palmtx_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmtx_ficp_platform_data); pxa_set_keypad_info(&palmtx_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c index 48a73f6..44fcc4e 100644 --- a/sound/soc/pxa/palm27x.c +++ b/sound/soc/pxa/palm27x.c @@ -200,7 +200,7 @@ static struct snd_soc_device palm27x_snd_devdata = { static struct platform_device *palm27x_snd_device; -static int __init palm27x_asoc_init(void) +static int palm27x_asoc_probe(struct platform_device *pdev) { int ret; @@ -208,6 +208,10 @@ static int __init palm27x_asoc_init(void) machine_is_palmld())) return -ENODEV; + if (pdev->dev.platform_data) + palm27x_ep_gpio = ((struct palm27x_asoc_info *) + (pdev->dev.platform_data))->jack_gpio; + ret = gpio_request(palm27x_ep_gpio, "Headphone Jack"); if (ret) return ret; @@ -245,16 +249,31 @@ err_alloc: return ret; } -static void __exit palm27x_asoc_exit(void) +static int __devexit palm27x_asoc_remove(struct platform_device *pdev) { free_irq(gpio_to_irq(palm27x_ep_gpio), NULL); gpio_free(palm27x_ep_gpio); platform_device_unregister(palm27x_snd_device); + return 0; } -void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) +static struct platform_driver palm27x_wm9712_driver = { + .probe = palm27x_asoc_probe, + .remove = __devexit_p(palm27x_asoc_remove), + .driver = { + .name = "palm27x-asoc", + .owner = THIS_MODULE, + }, +}; + +static int __init palm27x_asoc_init(void) +{ + return platform_driver_register(&palm27x_wm9712_driver); +} + +static void __exit palm27x_asoc_exit(void) { - palm27x_ep_gpio = data->jack_gpio; + platform_driver_unregister(&palm27x_wm9712_driver); } module_init(palm27x_asoc_init); -- cgit v0.10.2 From a48dc30da44769ea3f3562c18f54878a9a3e78a1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 15 Apr 2009 13:56:08 +0200 Subject: [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones As a result of an off-by-1 error pcm990 leaves one unused GPIO number between built-in GPIOs and the pca9536 extender. Fix it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6112740..6c12b5a 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -377,7 +377,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = { #include static struct pca953x_platform_data pca9536_data = { - .gpio_base = NR_BUILTIN_GPIO + 1, + .gpio_base = NR_BUILTIN_GPIO, }; static int gpio_bus_switch; @@ -405,9 +405,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) int ret; if (!gpio_bus_switch) { - ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera"); + ret = gpio_request(NR_BUILTIN_GPIO, "camera"); if (!ret) { - gpio_bus_switch = NR_BUILTIN_GPIO + 1; + gpio_bus_switch = NR_BUILTIN_GPIO; gpio_direction_output(gpio_bus_switch, 0); } else gpio_bus_switch = -EINVAL; -- cgit v0.10.2 From e2139b32726e5dd184974c785ea3f62026590801 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Thu, 26 Mar 2009 16:41:56 +0200 Subject: Bluetooth: Fix removing of RFCOMM DLC timer with DEFER_SETUP There is a missing call to rfcomm_dlc_clear_timer in the case that DEFER_SETUP is used and so the connection gets disconnected after the timeout even if it was successfully accepted previously. This patch adds a call to rfcomm_dlc_clear_timer to rfcomm_dlc_accept which will get called when the user accepts the connection by calling read() on the socket. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 1d0fb0f..374536e 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1194,6 +1194,8 @@ void rfcomm_dlc_accept(struct rfcomm_dlc *d) rfcomm_send_ua(d->session, d->dlci); + rfcomm_dlc_clear_timer(d); + rfcomm_dlc_lock(d); d->state = BT_CONNECTED; d->state_change(d, 0); -- cgit v0.10.2 From 732547f96ea2442965a24e0ed529d285321a0fff Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 19 Apr 2009 19:14:14 +0200 Subject: Bluetooth: Fallback from eSCO to SCO on unspecified error Some Bluetooth chips (like the ones from Texas Instruments) don't do proper eSCO negotiations inside the Link Manager. They just return an error code and in case of the Kyocera ED-8800 headset it is just a random error. < HCI Command: Setup Synchronous Connection 0x01|0x0028) plen 17 handle 1 voice setting 0x0060 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1f handle 257 bdaddr 00:14:0A:xx:xx:xx type eSCO Error: Unspecified Error In these cases it is up to the host stack to fallback to a SCO setup and so retry with SCO parameters. Based on a report by Nick Pelly Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 5553424..963f966 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1646,20 +1646,28 @@ static inline void hci_sync_conn_complete_evt(struct hci_dev *hdev, struct sk_bu conn->type = SCO_LINK; } - if (conn->out && ev->status == 0x1c && conn->attempt < 2) { - conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) | - (hdev->esco_type & EDR_ESCO_MASK); - hci_setup_sync(conn, conn->link->handle); - goto unlock; - } - - if (!ev->status) { + switch (ev->status) { + case 0x00: conn->handle = __le16_to_cpu(ev->handle); conn->state = BT_CONNECTED; hci_conn_add_sysfs(conn); - } else + break; + + case 0x1c: /* SCO interval rejected */ + case 0x1f: /* Unspecified error */ + if (conn->out && conn->attempt < 2) { + conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) | + (hdev->esco_type & EDR_ESCO_MASK); + hci_setup_sync(conn, conn->link->handle); + goto unlock; + } + /* fall through */ + + default: conn->state = BT_CLOSED; + break; + } hci_proto_connect_cfm(conn, ev->status); if (ev->status) -- cgit v0.10.2 From 9499237a1c42a27fbcc7ed1d59e34df2b574cdfb Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 19 Apr 2009 19:30:03 +0200 Subject: Bluetooth: Add workaround for wrong HCI event in eSCO setup The Broadcom chips with 2.1 firmware handle the fallback case to a SCO link wrongly when setting up eSCO connections. < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 11 voice setting 0x0060 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 1 bdaddr 00:1E:3A:xx:xx:xx type SCO encrypt 0x01 The Link Manager negotiates the fallback to SCO, but then sends out a Connect Complete event. This is wrong and the Link Manager should actually send a Synchronous Connection Complete event if the Setup Synchronous Connection has been used. Only the remote side is allowed to use Connect Complete to indicate the missing support for eSCO in the host stack. This patch adds a workaround for this which clearly should not be needed, but reality is that broken Broadcom devices are deployed. Based on a report by Ville Tervo Signed-off-by: Marcel Holtman diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 963f966..15f40ea 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -866,8 +866,16 @@ static inline void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *s hci_dev_lock(hdev); conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr); - if (!conn) - goto unlock; + if (!conn) { + if (ev->link_type != SCO_LINK) + goto unlock; + + conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr); + if (!conn) + goto unlock; + + conn->type = SCO_LINK; + } if (!ev->status) { conn->handle = __le16_to_cpu(ev->handle); -- cgit v0.10.2 From 613cbe3d4870429bf2e816d4bbe3146d157ee5c1 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sun, 19 Apr 2009 18:40:43 +0200 Subject: Don't set relatime when noatime is specified Since commit 0a1c01c9477602ee8b44548a9405b2c1d587b5a2 ("Make relatime default") when a file system is mounted explicitely with noatime it gets both the MNT_RELATIME and MNT_NOATIME bits set. This shows up like this in /proc/mounts: /dev/xxx /yyy ext3 rw,noatime,relatime,errors=continue,data=writeback 0 0 That looks strange. The VFS uses noatime in this case, but both flags are set. So it's more a cosmetic issue, but still better to fix. Cc: mjg@redhat.com Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds diff --git a/fs/namespace.c b/fs/namespace.c index c6f54e4..d9138f8 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1920,8 +1920,9 @@ long do_mount(char *dev_name, char *dir_name, char *type_page, if (data_page) ((char *)data_page)[PAGE_SIZE - 1] = 0; - /* Default to relatime */ - mnt_flags |= MNT_RELATIME; + /* Default to relatime unless overriden */ + if (!(flags & MS_NOATIME)) + mnt_flags |= MNT_RELATIME; /* Separate the per-mountpoint flags */ if (flags & MS_NOSUID) -- cgit v0.10.2 From 42a17ad2762f465d291c3bc0b6ed2b3738f65481 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 18 Apr 2009 11:30:56 +0200 Subject: needs to include . uses EINVAL so should include . This fixes a build error on 64-bit MIPS if CONFIG_SECCOMP is disabled. Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h index 262a8dc..167c333 100644 --- a/include/linux/seccomp.h +++ b/include/linux/seccomp.h @@ -21,6 +21,8 @@ extern long prctl_set_seccomp(unsigned long); #else /* CONFIG_SECCOMP */ +#include + typedef struct { } seccomp_t; #define secure_computing(x) do { } while (0) -- cgit v0.10.2 From c0b7988200a82290287c6f4cd49585007f73175a Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Sat, 18 Apr 2009 22:17:17 +0200 Subject: Revert "console ASCII glyph 1:1 mapping" This reverts commit 1c55f18717304100a5f624c923f7cb6511b4116d. Ingo Brueckl was assuming that reverting to 1:1 mapping for chars >= 128 was not useful, but it happens to be: due to the limitations of the Linux console, when a blind user wants to read BIG5 on it, he has no other way than loading a font without SFM and let the 1:1 mapping permit the screen reader to get the BIG5 encoding. Signed-off-by: Samuel Thibault Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 2c1d133..08151d4 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2274,7 +2274,7 @@ rescan_last_byte: continue; /* nothing to display */ } /* Glyph not found */ - if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) { + if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) { /* In legacy mode use the glyph we get by a 1:1 mapping. This would make absolutely no sense with Unicode in mind, but do this for ASCII characters since a font may lack -- cgit v0.10.2 From 6a7c7eaf71b636f197d73b381a2ab729ebdcfb2e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 19 Apr 2009 20:08:42 +0200 Subject: PM/Suspend: Introduce two new platform callbacks to avoid breakage Commit 900af0d973856d6feb6fc088c2d0d3fde57707d3 (PM: Change suspend code ordering) changed the ordering of suspend code in such a way that the platform .prepare() callback is now executed after the device drivers' late suspend callbacks have run. Unfortunately, this turns out to break ARM platforms that need to talk via I2C to power control devices during the .prepare() callback. For this reason introduce two new platform suspend callbacks, .prepare_late() and .wake(), that will be called just prior to disabling non-boot CPUs and right after bringing them back on line, respectively, and use them instead of .prepare() and .finish() for ACPI suspend. Make the PM core execute the .prepare() and .finish() platform suspend callbacks where they were executed previously (that is, right after calling the regular suspend methods provided by device drivers and right before executing their regular resume methods, respectively). It is not necessary to make analogous changes to the hibernation code and data structures at the moment, because they are only used by ACPI platforms. Signed-off-by: Rafael J. Wysocki Reported-by: Russell King Acked-by: Len Brown diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 779e4e5..d060e6f 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -300,9 +300,9 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state) static struct platform_suspend_ops acpi_suspend_ops = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin, - .prepare = acpi_pm_prepare, + .prepare_late = acpi_pm_prepare, .enter = acpi_suspend_enter, - .finish = acpi_pm_finish, + .wake = acpi_pm_finish, .end = acpi_pm_end, }; @@ -328,9 +328,9 @@ static int acpi_suspend_begin_old(suspend_state_t pm_state) static struct platform_suspend_ops acpi_suspend_ops_old = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin_old, - .prepare = acpi_pm_disable_gpes, + .prepare_late = acpi_pm_disable_gpes, .enter = acpi_suspend_enter, - .finish = acpi_pm_finish, + .wake = acpi_pm_finish, .end = acpi_pm_end, .recover = acpi_pm_finish, }; diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 3e3a436..795032e 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -58,10 +58,17 @@ typedef int __bitwise suspend_state_t; * by @begin(). * @prepare() is called right after devices have been suspended (ie. the * appropriate .suspend() method has been executed for each device) and - * before the nonboot CPUs are disabled (it is executed with IRQs enabled). - * This callback is optional. It returns 0 on success or a negative - * error code otherwise, in which case the system cannot enter the desired - * sleep state (@enter() and @finish() will not be called in that case). + * before device drivers' late suspend callbacks are executed. It returns + * 0 on success or a negative error code otherwise, in which case the + * system cannot enter the desired sleep state (@prepare_late(), @enter(), + * @wake(), and @finish() will not be called in that case). + * + * @prepare_late: Finish preparing the platform for entering the system sleep + * state indicated by @begin(). + * @prepare_late is called before disabling nonboot CPUs and after + * device drivers' late suspend callbacks have been executed. It returns + * 0 on success or a negative error code otherwise, in which case the + * system cannot enter the desired sleep state (@enter() and @wake()). * * @enter: Enter the system sleep state indicated by @begin() or represented by * the argument if @begin() is not implemented. @@ -69,19 +76,26 @@ typedef int __bitwise suspend_state_t; * error code otherwise, in which case the system cannot enter the desired * sleep state. * - * @finish: Called when the system has just left a sleep state, right after - * the nonboot CPUs have been enabled and before devices are resumed (it is - * executed with IRQs enabled). + * @wake: Called when the system has just left a sleep state, right after + * the nonboot CPUs have been enabled and before device drivers' early + * resume callbacks are executed. + * This callback is optional, but should be implemented by the platforms + * that implement @prepare_late(). If implemented, it is always called + * after @enter(), even if @enter() fails. + * + * @finish: Finish wake-up of the platform. + * @finish is called right prior to calling device drivers' regular suspend + * callbacks. * This callback is optional, but should be implemented by the platforms * that implement @prepare(). If implemented, it is always called after - * @enter() (even if @enter() fails). + * @enter() and @wake(), if implemented, even if any of them fails. * * @end: Called by the PM core right after resuming devices, to indicate to * the platform that the system has returned to the working state or * the transition to the sleep state has been aborted. * This callback is optional, but should be implemented by the platforms - * that implement @begin(), but platforms implementing @begin() should - * also provide a @end() which cleans up transitions aborted before + * that implement @begin(). Accordingly, platforms implementing @begin() + * should also provide a @end() which cleans up transitions aborted before * @enter(). * * @recover: Recover the platform from a suspend failure. @@ -93,7 +107,9 @@ struct platform_suspend_ops { int (*valid)(suspend_state_t state); int (*begin)(suspend_state_t state); int (*prepare)(void); + int (*prepare_late)(void); int (*enter)(suspend_state_t state); + void (*wake)(void); void (*finish)(void); void (*end)(void); void (*recover)(void); diff --git a/kernel/power/main.c b/kernel/power/main.c index f172f41..f99ed6a 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -291,20 +291,26 @@ static int suspend_enter(suspend_state_t state) device_pm_lock(); + if (suspend_ops->prepare) { + error = suspend_ops->prepare(); + if (error) + goto Done; + } + error = device_power_down(PMSG_SUSPEND); if (error) { printk(KERN_ERR "PM: Some devices failed to power down\n"); - goto Done; + goto Platfrom_finish; } - if (suspend_ops->prepare) { - error = suspend_ops->prepare(); + if (suspend_ops->prepare_late) { + error = suspend_ops->prepare_late(); if (error) goto Power_up_devices; } if (suspend_test(TEST_PLATFORM)) - goto Platfrom_finish; + goto Platform_wake; error = disable_nonboot_cpus(); if (error || suspend_test(TEST_CPUS)) @@ -326,13 +332,17 @@ static int suspend_enter(suspend_state_t state) Enable_cpus: enable_nonboot_cpus(); - Platfrom_finish: - if (suspend_ops->finish) - suspend_ops->finish(); + Platform_wake: + if (suspend_ops->wake) + suspend_ops->wake(); Power_up_devices: device_power_up(PMSG_RESUME); + Platfrom_finish: + if (suspend_ops->finish) + suspend_ops->finish(); + Done: device_pm_unlock(); -- cgit v0.10.2 From d9c6f546469f33f9aa48ae5991c33da8cd535b37 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 16 Apr 2009 22:57:46 +0200 Subject: drm: count reaches -1 With a postfix decrement in the test count will reach -1 rather than 0, subsequent tests fail. Signed-off-by: Roel Kluin Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/via/via_dma.c b/drivers/gpu/drm/via/via_dma.c index 7a339db..bfb92d2 100644 --- a/drivers/gpu/drm/via/via_dma.c +++ b/drivers/gpu/drm/via/via_dma.c @@ -481,11 +481,13 @@ static int via_wait_idle(drm_via_private_t * dev_priv) { int count = 10000000; - while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && count--); + while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count) + ; - while (count-- && (VIA_READ(VIA_REG_STATUS) & + while (count && (VIA_READ(VIA_REG_STATUS) & (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | - VIA_3D_ENG_BUSY))) ; + VIA_3D_ENG_BUSY))) + --count; return count; } @@ -705,7 +707,7 @@ static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file * switch (d_siz->func) { case VIA_CMDBUF_SPACE: while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size) - && count--) { + && --count) { if (!d_siz->wait) { break; } @@ -717,7 +719,7 @@ static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file * break; case VIA_CMDBUF_LAG: while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size) - && count--) { + && --count) { if (!d_siz->wait) { break; } -- cgit v0.10.2 From 77d26dc9b9805f322f5a1f6e559b18ad66205bd9 Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Thu, 16 Apr 2009 17:51:25 +0800 Subject: drm: clean dirty memory after device release In current code we register/unregister connector object by drm_sysfs_connector_add/remove function. However under some cases, we need to dynamically register or unregister device multiple times, so we have to go through register -> unregister ->register routine. Because after device_unregister function our memory is dirty, we need to do clean operation in order to re-register the device, otherwise the system will crash. The patch intends to clean device after device release. Signed-off-by: Ma Ling Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index bc0c684..022876a 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -132,6 +132,7 @@ void drm_sysfs_destroy(void) */ static void drm_sysfs_device_release(struct device *dev) { + memset(dev, 0, sizeof(struct device)); return; } -- cgit v0.10.2 From 6b0084266c1d4917ad9259759a1e7bd623cb3888 Mon Sep 17 00:00:00 2001 From: Jonas Bonn Date: Thu, 16 Apr 2009 09:00:02 +0200 Subject: drm: set/clear is_master when master changed The variable is_master is being used to track the drm_file that is currently master, so its value needs to be updated accordingly when the master is changed. Signed-off-by: Jonas Bonn Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index d009661..1b3e0ff 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -159,6 +159,9 @@ void drm_master_put(struct drm_master **master) int drm_setmaster_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { + if (file_priv->is_master) + return 0; + if (file_priv->minor->master && file_priv->minor->master != file_priv->master) return -EINVAL; @@ -169,6 +172,7 @@ int drm_setmaster_ioctl(struct drm_device *dev, void *data, file_priv->minor->master != file_priv->master) { mutex_lock(&dev->struct_mutex); file_priv->minor->master = drm_master_get(file_priv->master); + file_priv->is_master = 1; mutex_unlock(&dev->struct_mutex); } @@ -178,10 +182,12 @@ int drm_setmaster_ioctl(struct drm_device *dev, void *data, int drm_dropmaster_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - if (!file_priv->master) + if (!file_priv->is_master) return -EINVAL; + mutex_lock(&dev->struct_mutex); drm_master_put(&file_priv->minor->master); + file_priv->is_master = 0; mutex_unlock(&dev->struct_mutex); return 0; } -- cgit v0.10.2 From 07f1c7a7f6736d9ec2eba57d209c5f48888d841e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 20 Apr 2009 09:32:50 +1000 Subject: drm: check for minor master before allowing drop master. When fast user switching a lot eventually we get to the point, where we were checking for the wrong thing in this function. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index 1b3e0ff..ef87861 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -185,6 +185,9 @@ int drm_dropmaster_ioctl(struct drm_device *dev, void *data, if (!file_priv->is_master) return -EINVAL; + if (!file_priv->minor->master) + return -EINVAL; + mutex_lock(&dev->struct_mutex); drm_master_put(&file_priv->minor->master); file_priv->is_master = 0; -- cgit v0.10.2 From 59de2bebabc5027f93df999d59cc65df591c3e6e Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 20 Apr 2009 10:08:35 +1000 Subject: agp: zero pages before sending to userspace AGP pages might be mapped into userspace finally, so the pages should be set to zero before userspace can use it. Otherwise there is potential information leakage. Signed-off-by: Shaohua Li Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 10d6cbd..2224b76 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -1226,7 +1226,7 @@ int agp_generic_alloc_pages(struct agp_bridge_data *bridge, struct agp_memory *m int i, ret = -ENOMEM; for (i = 0; i < num_pages; i++) { - page = alloc_page(GFP_KERNEL | GFP_DMA32); + page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO); /* agp_free_memory() needs gart address */ if (page == NULL) goto out; @@ -1257,7 +1257,7 @@ void *agp_generic_alloc_page(struct agp_bridge_data *bridge) { struct page * page; - page = alloc_page(GFP_KERNEL | GFP_DMA32); + page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO); if (page == NULL) return NULL; -- cgit v0.10.2 From 1f59390339f263c0fe7908fbe54466dbf3a64b58 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 20 Apr 2009 11:50:24 +1000 Subject: md: support bitmaps on RAID10 arrays larger then 2 terabytes .. and other arrays with components larger than 2 terabytes. We use a "long" rather than a "sector_t" in part of the bitmap size calculations, which is sad. Reported-by: "Mario 'BitKoenig' Holbe" Signed-off-by: NeilBrown diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index e4510c9..1fb91ed 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1590,7 +1590,7 @@ void bitmap_destroy(mddev_t *mddev) int bitmap_create(mddev_t *mddev) { struct bitmap *bitmap; - unsigned long blocks = mddev->resync_max_sectors; + sector_t blocks = mddev->resync_max_sectors; unsigned long chunks; unsigned long pages; struct file *file = mddev->bitmap_file; @@ -1632,8 +1632,8 @@ int bitmap_create(mddev_t *mddev) bitmap->chunkshift = ffz(~bitmap->chunksize); /* now that chunksize and chunkshift are set, we can use these macros */ - chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) / - CHUNK_BLOCK_RATIO(bitmap); + chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >> + CHUNK_BLOCK_SHIFT(bitmap); pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO; BUG_ON(!pages); -- cgit v0.10.2 From 093f13e23137b9e5f7629dd5932ceea1419e2b61 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Wed, 15 Apr 2009 10:37:33 -0700 Subject: x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perf Fix for a regression that was introduced by earlier commit 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c on Mon Apr 6 11:26:08 2009 Regression resulted in the below error happened on systems with software coordination where per_cpu acpi data will not be initiated for secondary CPUs in a P-state domain. On Tue, 2009-04-14 at 23:01 -0700, Zhang, Yanmin wrote: My machine hanged with kernel 2.6.30-rc2 when script read > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor. > > opps happens in get_measured_perf: > > cur.aperf.whole = readin.aperf.whole - > per_cpu(drv_data, cpu)->saved_aperf; > > Because per_cpu(drv_data, cpu)=NULL. > > So function get_measured_perf should check if (per_cpu(drv_data, > cpu)==NULL) > and return 0 if it's NULL. --------------sys log------------------ BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [] get_measured_perf+0x4a/0xf9 PGD a7dd88067 PUD a7ccf5067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor CPU 0 Modules linked in: video output Pid: 2091, comm: kondemand/0 Not tainted 2.6.30-rc2 #1 MP Server RIP: 0010:[] [] get_measured_perf+0x4a/0xf9 RSP: 0018:ffff880a7d56de20 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000046241a42b6 RCX: ffff88004d219000 RDX: 000000000000b660 RSI: 0000000000000020 RDI: 0000000000000001 RBP: ffff880a7f052000 R08: 00000046241a42b6 R09: ffffffff807639f0 R10: 00000000ffffffea R11: ffffffff802207f4 R12: ffff880a7f052000 R13: ffff88004d20e460 R14: 0000000000ddd5a6 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88004d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000020 CR3: 0000000a7f1bf000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kondemand/0 (pid: 2091, threadinfo ffff880a7d56c000, task ffff880a7d4d18c0) Stack: ffff880a7f052078 ffffffff803efd54 00000046241a42b6 000000462ffa9e95 0000000000000001 0000000000000001 00000000ffffffea ffffffff8064f41a 0000000000000012 0000000000000012 ffff880a7f052000 ffffffff80650547 Call Trace: [] ? kobject_get+0x12/0x17 [] ? __cpufreq_driver_getavg+0x42/0x57 [] ? do_dbs_timer+0x147/0x272 [] ? do_dbs_timer+0x0/0x272 [] ? worker_thread+0x15b/0x1f5 [] ? autoremove_wake_function+0x0/0x2e [] ? worker_thread+0x0/0x1f5 [] ? kthread+0x54/0x83 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0x83 [] ? child_rip+0x0/0x20 Code: 99 a6 03 00 31 c9 85 c0 0f 85 c3 00 00 00 89 df 4c 8b 44 24 10 48 c7 c2 60 b6 00 00 48 8b 0c fd e0 30 a5 80 4c 89 c3 48 8b 04 0a <48> 2b 58 20 48 8b 44 24 18 48 89 1c 24 48 8b 34 0a 48 2b 46 28 RIP [] get_measured_perf+0x4a/0xf9 RSP CR2: 0000000000000020 ---[ end trace 2b8fac9a49e19ad4 ]--- Tested-by: "Zhang, Yanmin" Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index ecdb682..dd0bd76 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -68,11 +68,16 @@ struct acpi_cpufreq_data { unsigned int max_freq; unsigned int resume; unsigned int cpu_feature; - u64 saved_aperf, saved_mperf; }; static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data); +struct acpi_msr_data { + u64 saved_aperf, saved_mperf; +}; + +static DEFINE_PER_CPU(struct acpi_msr_data, msr_data); + DEFINE_TRACE(power_mark); /* acpi_perf_data is a pointer to percpu data. */ @@ -287,11 +292,11 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, return 0; cur.aperf.whole = readin.aperf.whole - - per_cpu(drv_data, cpu)->saved_aperf; + per_cpu(msr_data, cpu).saved_aperf; cur.mperf.whole = readin.mperf.whole - - per_cpu(drv_data, cpu)->saved_mperf; - per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole; - per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole; + per_cpu(msr_data, cpu).saved_mperf; + per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole; + per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole; #ifdef __i386__ /* -- cgit v0.10.2 From e0e8c4e512e92bc25c19bd8d4926de17d2f8fbf2 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 17 Apr 2009 16:22:06 +0200 Subject: acpi-cpufreq: Cleanup: Use printk_once Signed-off-by: Thomas Renninger Signed-off-by: Len Brown diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index dd0bd76..4eab747 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -693,13 +693,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) /* Check for high latency (>20uS) from buggy BIOSes, like on T42 */ if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && policy->cpuinfo.transition_latency > 20 * 1000) { - static int print_once; policy->cpuinfo.transition_latency = 20 * 1000; - if (!print_once) { - print_once = 1; - printk(KERN_INFO "Capping off P-state tranision latency" - " at 20 uS\n"); - } + printk_once(KERN_INFO "Capping off P-state tranision" + " latency at 20 uS\n"); } data->max_freq = perf->states[0].core_frequency * 1000; -- cgit v0.10.2 From d91758f5ddb80e91176fa2cf80c88c1633950b3d Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 17 Apr 2009 16:22:07 +0200 Subject: acpi-cpufreq: style-only: add parens to math expression Signed-off-by: Thomas Renninger Signed-off-by: Len Brown diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 4eab747..aec3161 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -340,7 +340,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, #endif - retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100; + retval = (per_cpu(drv_data, policy->cpu)->max_freq * perf_percent) / 100; return retval; } -- cgit v0.10.2 From d876dfbbf5c8728102fb4f683450fa9ae3259cda Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 17 Apr 2009 16:22:08 +0200 Subject: acpi-cpufreq: Do not let get_measured perf depend on internal variable Take already available policy->cpuinfo.max_freq and get rid of acpi-cpufreq specific max_freq variable. This implies that P0 is always the highest frequency which should always be true as ACPI spec says: As a result, the zeroth entry describes the highest performance state Signed-off-by: Thomas Renninger Acked-by: Venkatesh Pallipadi Signed-off-by: Len Brown diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index aec3161..208ecf6 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -65,7 +65,6 @@ enum { struct acpi_cpufreq_data { struct acpi_processor_performance *acpi_data; struct cpufreq_frequency_table *freq_table; - unsigned int max_freq; unsigned int resume; unsigned int cpu_feature; }; @@ -340,7 +339,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, #endif - retval = (per_cpu(drv_data, policy->cpu)->max_freq * perf_percent) / 100; + retval = (policy->cpuinfo.max_freq * perf_percent) / 100; return retval; } @@ -698,7 +697,6 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) " latency at 20 uS\n"); } - data->max_freq = perf->states[0].core_frequency * 1000; /* table init */ for (i = 0; i < perf->state_count; i++) { if (i > 0 && perf->states[i].core_frequency >= @@ -717,6 +715,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (result) goto err_freqfree; + if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) + printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n"); + switch (perf->control_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: /* Current speed is unknown and not detectable by IO port */ -- cgit v0.10.2 From 90af2cf6205bfc8def8c5a64c9134031d60b10fb Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 14 Apr 2009 11:02:18 +0800 Subject: ACPI video: fix an error when the brightness levels on AC and on Battery are same when the brightness level on AC and brightness level on Battery are same, the level_ac_battery is 1 in the current code, which is wrong. Signed-off-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index cd4fb75..21968ae 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -770,10 +770,12 @@ acpi_video_init_brightness(struct acpi_video_device *device) * In this case, the first two elements in _BCL packages * are also supported brightness levels that OS should take care of. */ - for (i = 2; i < count; i++) - if (br->levels[i] == br->levels[0] || - br->levels[i] == br->levels[1]) + for (i = 2; i < count; i++) { + if (br->levels[i] == br->levels[0]) level_ac_battery++; + if (br->levels[i] == br->levels[1]) + level_ac_battery++; + } if (level_ac_battery < 2) { level_ac_battery = 2 - level_ac_battery; -- cgit v0.10.2 From 52fcd11c0900b0cbc584eeda12a6e27dd6c9d046 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 20 Apr 2009 08:58:45 +0100 Subject: GFS2: Clear dirty bit at end of inode glock sync The dirty bit can get set during the inode glock sync. Its too complicated to change that at the moment, so this is the quick fix - to clear the bit again at the end of the function. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c index bf23a62..70f87f4 100644 --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -156,6 +156,12 @@ static void inode_go_sync(struct gfs2_glock *gl) error = filemap_fdatawait(metamapping); mapping_set_error(metamapping, error); gfs2_ail_empty_gl(gl); + /* + * Writeback of the data mapping may cause the dirty flag to be set + * so we have to clear it again here. + */ + smp_mb__before_clear_bit(); + clear_bit(GLF_DIRTY, &gl->gl_flags); } /** -- cgit v0.10.2 From 3851c66cf0d130ae49f99fe1dea42950d9835037 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 17 Apr 2009 12:21:11 +0000 Subject: cxgb3: fix link fault handling Use the existing periodic task to handle link faults. The link fault interrupt handler is also called in work queue context, which is wrong and might cause potential deadlocks. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index ab0e5fe..9fdfe0b 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2493,6 +2493,7 @@ static void check_link_status(struct adapter *adapter) spin_lock_irq(&adapter->work_lock); if (p->link_fault) { + t3_link_fault(adapter, i); spin_unlock_irq(&adapter->work_lock); continue; } @@ -2554,9 +2555,7 @@ static void t3_adap_check_task(struct work_struct *work) adapter->check_task_cnt++; - /* Check link status for PHYs without interrupts */ - if (p->linkpoll_period) - check_link_status(adapter); + check_link_status(adapter); /* Accumulate MAC stats if needed */ if (!p->linkpoll_period || @@ -2680,21 +2679,6 @@ void t3_os_ext_intr_handler(struct adapter *adapter) spin_unlock(&adapter->work_lock); } -static void link_fault_task(struct work_struct *work) -{ - struct adapter *adapter = container_of(work, struct adapter, - link_fault_handler_task); - int i; - - for_each_port(adapter, i) { - struct net_device *netdev = adapter->port[i]; - struct port_info *pi = netdev_priv(netdev); - - if (pi->link_fault) - t3_link_fault(adapter, i); - } -} - void t3_os_link_fault_handler(struct adapter *adapter, int port_id) { struct net_device *netdev = adapter->port[port_id]; @@ -2702,7 +2686,6 @@ void t3_os_link_fault_handler(struct adapter *adapter, int port_id) spin_lock(&adapter->work_lock); pi->link_fault = 1; - queue_work(cxgb3_wq, &adapter->link_fault_handler_task); spin_unlock(&adapter->work_lock); } @@ -3082,7 +3065,6 @@ static int __devinit init_one(struct pci_dev *pdev, INIT_LIST_HEAD(&adapter->adapter_list); INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task); - INIT_WORK(&adapter->link_fault_handler_task, link_fault_task); INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task); INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task); diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 31ed31a..e1bd690 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -1202,7 +1202,6 @@ void t3_link_changed(struct adapter *adapter, int port_id) struct cphy *phy = &pi->phy; struct cmac *mac = &pi->mac; struct link_config *lc = &pi->link_config; - int force_link_down = 0; phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); @@ -1218,14 +1217,9 @@ void t3_link_changed(struct adapter *adapter, int port_id) status = t3_read_reg(adapter, A_XGM_INT_STATUS + mac->offset); if (status & F_LINKFAULTCHANGE) { mac->stats.link_faults++; - force_link_down = 1; + pi->link_fault = 1; } t3_open_rx_traffic(mac, rx_cfg, rx_hash_high, rx_hash_low); - - if (force_link_down) { - t3_os_link_fault_handler(adapter, port_id); - return; - } } if (lc->requested_fc & PAUSE_AUTONEG) @@ -1292,9 +1286,6 @@ void t3_link_fault(struct adapter *adapter, int port_id) /* Account link faults only when the phy reports a link up */ if (link_ok) mac->stats.link_faults++; - - msleep(1000); - t3_os_link_fault_handler(adapter, port_id); } else { if (link_ok) t3_write_reg(adapter, A_XGM_XAUI_ACT_CTRL + mac->offset, -- cgit v0.10.2 From c80b0c28caed5cd9165caab6295ed86b4e9fc327 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 17 Apr 2009 12:21:17 +0000 Subject: cxgb3: fix workqueue flush issues The fatal error task can be scheduled while processing an offload packet in NAPI context when the connection handle is bogus. this can race with the ports being brought down and the cxgb3 workqueue being flushed. Stop napi processing before flushing the work queue. The ULP drivers (iSCSI, iWARP) might also schedule a task on keventd_wk while releasing a connection handle (cxgb3_offload.c::cxgb3_queue_tid_release()). The driver however does not flush any work on keventd_wq while being unloaded. This patch also fixes this. Also call cancel_delayed_work_sync in place of the the deprecated cancel_rearming_delayed_workqueue. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 9fdfe0b..99b5032 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1117,8 +1117,8 @@ static void cxgb_down(struct adapter *adapter) spin_unlock_irq(&adapter->work_lock); free_irq_resources(adapter); - flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */ quiesce_rx(adapter); + flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */ } static void schedule_chk_task(struct adapter *adap) @@ -1187,6 +1187,9 @@ static int offload_close(struct t3cdev *tdev) sysfs_remove_group(&tdev->lldev->dev.kobj, &offload_attr_group); + /* Flush work scheduled while releasing TIDs */ + flush_scheduled_work(); + tdev->lldev = NULL; cxgb3_set_dummy_ops(tdev); t3_tp_set_offload_mode(adapter, 0); @@ -1247,8 +1250,7 @@ static int cxgb_close(struct net_device *dev) spin_unlock_irq(&adapter->work_lock); if (!(adapter->open_device_map & PORT_MASK)) - cancel_rearming_delayed_workqueue(cxgb3_wq, - &adapter->adap_check_task); + cancel_delayed_work_sync(&adapter->adap_check_task); if (!adapter->open_device_map) cxgb_down(adapter); -- cgit v0.10.2 From 2c2f409f32d55d901b28b4e9a06c40e9d899ad25 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 17 Apr 2009 12:21:22 +0000 Subject: cxgb3: Fix potential msi-x vector leak Release vectors when a MSI-X allocation fails. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 99b5032..cbd59fe 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2917,8 +2917,13 @@ static int __devinit cxgb_enable_msix(struct adapter *adap) while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0) vectors = err; - if (!err && vectors < (adap->params.nports + 1)) + if (err < 0) + pci_disable_msix(adap->pdev); + + if (!err && vectors < (adap->params.nports + 1)) { + pci_disable_msix(adap->pdev); err = -1; + } if (!err) { for (i = 0; i < vectors; ++i) -- cgit v0.10.2 From e8d19370734f11e5880bb9ae2125f586e9e5d15c Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 17 Apr 2009 12:21:27 +0000 Subject: cxgb3: Fix EEH final recovery attempt EEH attempts to recover up 6 times. The last attempt leaves all the ports and adapter down.hen The driver is then unloaded, bringing the adapter down again unconditionally. The unload will hang. Check if the adapter is already down before trying to bring it down again. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index cbd59fe..7ea4841 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1235,6 +1235,10 @@ static int cxgb_close(struct net_device *dev) struct port_info *pi = netdev_priv(dev); struct adapter *adapter = pi->adapter; + + if (!adapter->open_device_map) + return 0; + /* Stop link fault interrupts */ t3_xgm_intr_disable(adapter, pi->port_id); t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset); @@ -2823,6 +2827,9 @@ static pci_ers_result_t t3_io_error_detected(struct pci_dev *pdev, struct adapter *adapter = pci_get_drvdata(pdev); int ret; + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + ret = t3_adapter_error(adapter, 0); /* Request a slot reset. */ -- cgit v0.10.2 From c7c1a0f60b90955855ba8cd9cfc480167bf6c3da Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 17 Apr 2009 04:19:36 +0000 Subject: ax25: proc uid file misses header This has been broken for a while. I happened to catch it testing because one app "knew" that the top line of the calls data was the policy line and got confused. Put the header back. Signed-off-by: Alan Cox Signed-off-by: David S. Miller diff --git a/net/ax25/ax25_uid.c b/net/ax25/ax25_uid.c index 57aeba7..832bcf0 100644 --- a/net/ax25/ax25_uid.c +++ b/net/ax25/ax25_uid.c @@ -148,9 +148,13 @@ static void *ax25_uid_seq_start(struct seq_file *seq, loff_t *pos) { struct ax25_uid_assoc *pt; struct hlist_node *node; - int i = 0; + int i = 1; read_lock(&ax25_uid_lock); + + if (*pos == 0) + return SEQ_START_TOKEN; + ax25_uid_for_each(pt, node, &ax25_uid_list) { if (i == *pos) return pt; @@ -162,8 +166,10 @@ static void *ax25_uid_seq_start(struct seq_file *seq, loff_t *pos) static void *ax25_uid_seq_next(struct seq_file *seq, void *v, loff_t *pos) { ++*pos; - - return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next, + if (v == SEQ_START_TOKEN) + return ax25_uid_list.first; + else + return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next, ax25_uid_assoc, uid_node); } -- cgit v0.10.2 From 8caf153974f2274301e583fda732cc8e5b80331f Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Fri, 17 Apr 2009 10:08:49 +0000 Subject: net: sch_netem: Fix an inconsistency in ingress netem timestamps. Alex Sidorenko reported: "while experimenting with 'netem' we have found some strange behaviour. It seemed that ingress delay as measured by 'ping' command shows up on some hosts but not on others. After some investigation I have found that the problem is that skbuff->tstamp field value depends on whether there are any packet sniffers enabled. That is: - if any ptype_all handler is registered, the tstamp field is as expected - if there are no ptype_all handlers, the tstamp field does not show the delay" This patch prevents unnecessary update of tstamp in dev_queue_xmit_nit() on ingress path (with act_mirred) adding a check, so minimal overhead on the fast path, but only when sniffers etc. are active. Since netem at ingress seems to logically emulate a network before a host, tstamp is zeroed to trigger the update and pretend delays are from the outside. Reported-by: Alex Sidorenko Tested-by: Alex Sidorenko Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 343883f..dcc357e 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1336,7 +1336,12 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev) { struct packet_type *ptype; +#ifdef CONFIG_NET_CLS_ACT + if (!(skb->tstamp.tv64 && (G_TC_FROM(skb->tc_verd) & AT_INGRESS))) + net_timestamp(skb); +#else net_timestamp(skb); +#endif rcu_read_lock(); list_for_each_entry_rcu(ptype, &ptype_all, list) { diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index d876b87..2b88295 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -280,6 +280,14 @@ static struct sk_buff *netem_dequeue(struct Qdisc *sch) if (unlikely(!skb)) return NULL; +#ifdef CONFIG_NET_CLS_ACT + /* + * If it's at ingress let's pretend the delay is + * from the network (tstamp will be updated). + */ + if (G_TC_FROM(skb->tc_verd) & AT_INGRESS) + skb->tstamp.tv64 = 0; +#endif pr_debug("netem_dequeue: return skb=%p\n", skb); sch->q.qlen--; return skb; -- cgit v0.10.2 From 52cf3cc8acea52ecb93ef1dddb4ef2ae4e35c319 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Sat, 18 Apr 2009 05:48:48 +0000 Subject: tcp: fix mid-wq adjustment helper MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Just noticed while doing some new work that the recent mid-wq adjustment logic will misbehave when FACK is not in use (happens either due sysctl'ed off or auto-detected reordering) because I forgot the relevant TCPCB tagbit. Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 53300fa..59aec60 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -778,7 +778,7 @@ static void tcp_adjust_pcount(struct sock *sk, struct sk_buff *skb, int decr) if (tp->lost_skb_hint && before(TCP_SKB_CB(skb)->seq, TCP_SKB_CB(tp->lost_skb_hint)->seq) && - (tcp_is_fack(tp) || TCP_SKB_CB(skb)->sacked)) + (tcp_is_fack(tp) || (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED))) tp->lost_cnt_hint -= decr; tcp_verify_left_out(tp); -- cgit v0.10.2 From eb39c57ff7782bc015da517af1d9c3b2592e721e Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 19 Apr 2009 07:24:24 +0000 Subject: net: fix "compatibility" typos Signed-off-by: Marcin Slusarz Signed-off-by: David S. Miller diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9e92154..214a92d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -28,9 +28,9 @@ if NETDEVICES config COMPAT_NET_DEV_OPS default y - bool "Enable older network device API compatiablity" + bool "Enable older network device API compatibility" ---help--- - This option enables kernel compatiability with older network devices + This option enables kernel compatibility with older network devices that do not use net_device_ops interface. If unsure, say Y. diff --git a/net/core/dev.c b/net/core/dev.c index dcc357e..001a4c5 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4405,7 +4405,7 @@ int register_netdevice(struct net_device *dev) dev->iflink = -1; #ifdef CONFIG_COMPAT_NET_DEV_OPS - /* Netdevice_ops API compatiability support. + /* Netdevice_ops API compatibility support. * This is temporary until all network devices are converted. */ if (dev->netdev_ops) { @@ -4416,7 +4416,7 @@ int register_netdevice(struct net_device *dev) dev->name, netdev_drivername(dev, drivername, 64)); /* This works only because net_device_ops and the - compatiablity structure are the same. */ + compatibility structure are the same. */ dev->netdev_ops = (void *) &(dev->init); } #endif -- cgit v0.10.2 From 5db8765a86a4cbaf45adaf8c231cf9a6ca2dcfaf Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 16 Apr 2009 08:04:20 +0000 Subject: net: Fix GRO for multiple page fragments This loop over fragments in napi_fraginfo_skb() was "interesting". Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 001a4c5..308a7d0 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2545,9 +2545,9 @@ struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi, } BUG_ON(info->nr_frags > MAX_SKB_FRAGS); - frag = &info->frags[info->nr_frags - 1]; + frag = info->frags; - for (i = skb_shinfo(skb)->nr_frags; i < info->nr_frags; i++) { + for (i = 0; i < info->nr_frags; i++) { skb_fill_page_desc(skb, i, frag->page, frag->page_offset, frag->size); frag++; -- cgit v0.10.2 From 9c3fea6ab04a7bd9298e635bf29b4a5379f6c476 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 18 Apr 2009 14:15:52 +0000 Subject: tun: Only free a netdev when all tun descriptors are closed The commit c70f182940f988448f3c12a209d18b1edc276e33 ("tun: Fix races between tun_net_close and free_netdev") fixed a race where an asynchronous deletion of a tun device can hose a poll(2) on a tun fd attached to that device. However, this came at the cost of moving the tun wait queue into the tun file data structure. The problem with this is that it imposes restrictions on when and where the tun device can access the wait queue since the tun file may change at any time due to detaching and reattaching. In particular, now that we need to use the wait queue on the receive path it becomes difficult to properly synchronise this with the detachment of the tun device. This patch solves the original race in a different way. Since the race is only because the underlying memory gets freed, we can prevent it simply by ensuring that we don't do that until all tun descriptors ever attached to the device (even if they have since be detached because they may still be sitting in poll) have been closed. This is done by using reference counting the attached tun file descriptors. The refcount in tun->sk has been reappropriated for this purpose since it was already being used for that, albeit from the opposite angle. Note that we no longer zero tfile->tun since tun_get will return NULL anyway after the refcount on tfile hits zero. Instead it represents whether this device has ever been attached to a device. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 16716ae..95ae40a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -156,6 +156,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file) tfile->tun = tun; tun->tfile = tfile; dev_hold(tun->dev); + sock_hold(tun->sk); atomic_inc(&tfile->count); out: @@ -165,11 +166,8 @@ out: static void __tun_detach(struct tun_struct *tun) { - struct tun_file *tfile = tun->tfile; - /* Detach from net device */ netif_tx_lock_bh(tun->dev); - tfile->tun = NULL; tun->tfile = NULL; netif_tx_unlock_bh(tun->dev); @@ -339,6 +337,13 @@ static void tun_net_uninit(struct net_device *dev) } } +static void tun_free_netdev(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + + sock_put(tun->sk); +} + /* Net device open. */ static int tun_net_open(struct net_device *dev) { @@ -811,7 +816,7 @@ static void tun_setup(struct net_device *dev) tun->group = -1; dev->ethtool_ops = &tun_ethtool_ops; - dev->destructor = free_netdev; + dev->destructor = tun_free_netdev; } /* Trivial set of netlink ops to allow deleting tun or tap @@ -848,7 +853,7 @@ static void tun_sock_write_space(struct sock *sk) static void tun_sock_destruct(struct sock *sk) { - dev_put(container_of(sk, struct tun_sock, sk)->tun->dev); + free_netdev(container_of(sk, struct tun_sock, sk)->tun->dev); } static struct proto tun_proto = { @@ -920,11 +925,8 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) if (!sk) goto err_free_dev; - /* This ref count is for tun->sk. */ - dev_hold(dev); sock_init_data(&tun->socket, sk); sk->sk_write_space = tun_sock_write_space; - sk->sk_destruct = tun_sock_destruct; sk->sk_sndbuf = INT_MAX; sk->sk_sleep = &tfile->read_wait; @@ -942,11 +944,13 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) err = -EINVAL; err = register_netdevice(tun->dev); if (err < 0) - goto err_free_dev; + goto err_free_sk; + + sk->sk_destruct = tun_sock_destruct; err = tun_attach(tun, file); if (err < 0) - goto err_free_dev; + goto failed; } DBG(KERN_INFO "%s: tun_set_iff\n", tun->dev->name); @@ -1284,14 +1288,16 @@ static int tun_chr_close(struct inode *inode, struct file *file) __tun_detach(tun); /* If desireable, unregister the netdevice. */ - if (!(tun->flags & TUN_PERSIST)) { - sock_put(tun->sk); + if (!(tun->flags & TUN_PERSIST)) unregister_netdevice(tun->dev); - } rtnl_unlock(); } + tun = tfile->tun; + if (tun) + sock_put(tun->sk); + put_net(tfile->net); kfree(tfile); -- cgit v0.10.2 From c40af84a6726f63e35740d26f841992e8f31f92c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 19 Apr 2009 22:35:50 +0000 Subject: tun: Fix sk_sleep races when attaching/detaching As the sk_sleep wait queue actually lives in tfile, which may be detached from the tun device, bad things will happen when we use sk_sleep after detaching. Since the tun device is the persistent data structure here (when requested by the user), it makes much more sense to have the wait queue live there. There is no reason to have it in tfile at all since the only time we can wait is if we have a tun attached. In fact we already have a wait queue in tun_struct, so we might as well use it. Reported-by: Eric W. Biederman Tested-by: Christian Borntraeger Tested-by: Patrick McHardy Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 95ae40a..735bf41 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -93,7 +93,6 @@ struct tun_file { atomic_t count; struct tun_struct *tun; struct net *net; - wait_queue_head_t read_wait; }; struct tun_sock; @@ -331,7 +330,7 @@ static void tun_net_uninit(struct net_device *dev) /* Inform the methods they need to stop using the dev. */ if (tfile) { - wake_up_all(&tfile->read_wait); + wake_up_all(&tun->socket.wait); if (atomic_dec_and_test(&tfile->count)) __tun_detach(tun); } @@ -398,7 +397,7 @@ static int tun_net_xmit(struct sk_buff *skb, struct net_device *dev) /* Notify and wake up reader process */ if (tun->flags & TUN_FASYNC) kill_fasync(&tun->fasync, SIGIO, POLL_IN); - wake_up_interruptible(&tun->tfile->read_wait); + wake_up_interruptible(&tun->socket.wait); return 0; drop: @@ -495,7 +494,7 @@ static unsigned int tun_chr_poll(struct file *file, poll_table * wait) DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name); - poll_wait(file, &tfile->read_wait, wait); + poll_wait(file, &tun->socket.wait, wait); if (!skb_queue_empty(&tun->readq)) mask |= POLLIN | POLLRDNORM; @@ -768,7 +767,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv, goto out; } - add_wait_queue(&tfile->read_wait, &wait); + add_wait_queue(&tun->socket.wait, &wait); while (len) { current->state = TASK_INTERRUPTIBLE; @@ -799,7 +798,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv, } current->state = TASK_RUNNING; - remove_wait_queue(&tfile->read_wait, &wait); + remove_wait_queue(&tun->socket.wait, &wait); out: tun_put(tun); @@ -867,7 +866,6 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) struct sock *sk; struct tun_struct *tun; struct net_device *dev; - struct tun_file *tfile = file->private_data; int err; dev = __dev_get_by_name(net, ifr->ifr_name); @@ -925,10 +923,10 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) if (!sk) goto err_free_dev; + init_waitqueue_head(&tun->socket.wait); sock_init_data(&tun->socket, sk); sk->sk_write_space = tun_sock_write_space; sk->sk_sndbuf = INT_MAX; - sk->sk_sleep = &tfile->read_wait; tun->sk = sk; container_of(sk, struct tun_sock, sk)->tun = tun; @@ -1270,7 +1268,6 @@ static int tun_chr_open(struct inode *inode, struct file * file) atomic_set(&tfile->count, 0); tfile->tun = NULL; tfile->net = get_net(current->nsproxy->net_ns); - init_waitqueue_head(&tfile->read_wait); file->private_data = tfile; return 0; } -- cgit v0.10.2 From 5d4af1be06affa2b42cdf59cd376752be1f934b3 Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Mon, 20 Apr 2009 13:01:21 +0200 Subject: ALSA: us122l: add snd_us122l_free() Use it to clean up snd_us122l_card_used[]. Without patch unplugging of an US122L soundcard didn't reset the corresponding element of snd_us122l_card_used[] to 0. The (SNDRV_CARDS + 1)th plugging in did not result in creating the soundcard device anymore. Index values supplied with the modprobe command line were not used correctly anymore after the first unplugging of an US122L. Signed-off-by: Karsten Wiese Cc: stable@kernel.org Signed-off-by: Takashi Iwai diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index 98276aa..463f3ff 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -478,6 +478,14 @@ static bool us122l_create_card(struct snd_card *card) return true; } +static void snd_us122l_free(struct snd_card *card) +{ + struct us122l *us122l = US122L(card); + int index = us122l->chip.index; + if (index >= 0 && index < SNDRV_CARDS) + snd_us122l_card_used[index] = 0; +} + static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp) { int dev; @@ -494,7 +502,7 @@ static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp) if (err < 0) return err; snd_us122l_card_used[US122L(card)->chip.index = dev] = 1; - + card->private_free = snd_us122l_free; US122L(card)->chip.dev = device; US122L(card)->chip.card = card; mutex_init(&US122L(card)->mutex); @@ -588,7 +596,7 @@ static void snd_us122l_disconnect(struct usb_interface *intf) } usb_put_intf(intf); - usb_put_dev(US122L(card)->chip.dev); + usb_put_dev(us122l->chip.dev); while (atomic_read(&us122l->mmap_count)) msleep(500); -- cgit v0.10.2 From e3ba906ad17330e44fad5af42a423417249c6e09 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Mon, 20 Apr 2009 07:09:11 -0400 Subject: ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model) Reference: Ubuntu #84973 (https://launchpad.net/bugs/84973) Reference: Linux #8001 (http://bugzilla.kernel.org/show_bug.cgi?id=8001) Make the mute LED function properly on this unknown HP model. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c index 9ce8548..71515dd 100644 --- a/sound/pci/atiixp.c +++ b/sound/pci/atiixp.c @@ -1393,6 +1393,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .name = "HP nx6125", .type = AC97_TUNE_MUTE_LED }, + { + .subvendor = 0x103c, + .subdevice = 0x3091, + .name = "unknown HP", + .type = AC97_TUNE_MUTE_LED + }, { } /* terminator */ }; -- cgit v0.10.2 From eb8f3142fa30201426feb7b3f9046fcd730e17d3 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sat, 18 Apr 2009 21:26:57 +0100 Subject: [ARM] 5456/1: add sys_preadv and sys_pwritev Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs but not ARM, resulting in :1421:2: warning: #warning syscall preadv not implemented :1425:2: warning: #warning syscall pwritev not implemented This patch adds sys_preadv and sys_pwritev to ARM. These syscalls simply take five long-sized parameters, so they should have no calling-convention/ABI issues in the kernel. Tested on armv5tel eabi using a preadv/pwritev test program posted on linuxppc-dev earlier this month. It would be nice to get this into the kernel before 2.6.30 final, so that glibc's kernel version feature test for these syscalls doesn't have to special-case ARM. Signed-off-by: Mikael Pettersson Signed-off-by: Russell King diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 0106184..94cc58e 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -387,6 +387,8 @@ #define __NR_dup3 (__NR_SYSCALL_BASE+358) #define __NR_pipe2 (__NR_SYSCALL_BASE+359) #define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) +#define __NR_preadv (__NR_SYSCALL_BASE+361) +#define __NR_pwritev (__NR_SYSCALL_BASE+362) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 9ca8d13..1680e9e 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -370,6 +370,8 @@ CALL(sys_dup3) CALL(sys_pipe2) /* 360 */ CALL(sys_inotify_init1) + CALL(sys_preadv) + CALL(sys_pwritev) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v0.10.2 From 4a014a240b5a3c3b167702948a22dbe9e9a150a8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 20 Apr 2009 03:33:09 +0100 Subject: [ARM] 5457/1: mach-imx gpio buildfix From: David Brownell Fix GPIO-related build error on mach-imx platform: CC drivers/spi/spi_gpio.o In file included from /home/db/kernel/scratch/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:7, from drivers/spi/spi_gpio.c:23: arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_get_value': arch/arm/mach-imx/include/mach/gpio.h:27: error: implicit declaration of function '__REG2' arch/arm/mach-imx/include/mach/gpio.h:27: error: 'IMX_IO_BASE' undeclared (first use in this function) arch/arm/mach-imx/include/mach/gpio.h:27: error: (Each undeclared identifier is reported only once arch/arm/mach-imx/include/mach/gpio.h:27: error: for each function it appears in.) arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_set_value_inline': arch/arm/mach-imx/include/mach/gpio.h:36: error: 'IMX_IO_BASE' undeclared (first use in this function) arch/arm/mach-imx/include/mach/gpio.h:36: error: lvalue required as left operand of assignment arch/arm/mach-imx/include/mach/gpio.h:38: error: lvalue required as left operand of assignment ... Signed-off-by: David Brownell Signed-off-by: Russell King diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h index 502d5aa..6c2942f 100644 --- a/arch/arm/mach-imx/include/mach/gpio.h +++ b/arch/arm/mach-imx/include/mach/gpio.h @@ -1,6 +1,7 @@ #ifndef _IMX_GPIO_H #include +#include #include #define IMX_GPIO_ALLOC_MODE_NORMAL 0 -- cgit v0.10.2 From e56985da455b9dc0591b8cb2006cc94b6f4fb0f4 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 20 Apr 2009 09:45:54 +0100 Subject: GFS2: Fix page_mkwrite() return code This allows for the possibility of returning VM_FAULT_OOM as well as VM_FAULT_SIGBUS. This ensures that the correct action is taken. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/ops_file.c index 101caf3..5d82e91 100644 --- a/fs/gfs2/ops_file.c +++ b/fs/gfs2/ops_file.c @@ -413,7 +413,9 @@ out_unlock: gfs2_glock_dq(&gh); out: gfs2_holder_uninit(&gh); - if (ret) + if (ret == -ENOMEM) + ret = VM_FAULT_OOM; + else if (ret) ret = VM_FAULT_SIGBUS; return ret; } -- cgit v0.10.2 From c197facc8ea08062f8f949aade6a33649ee06771 Mon Sep 17 00:00:00 2001 From: "hummerbliss@gmail.com" Date: Mon, 20 Apr 2009 17:12:35 +0200 Subject: netfilter: bridge: allow fragmentation of VLAN packets traversing a bridge br_nf_dev_queue_xmit only checks for ETH_P_IP packets for fragmenting but not VLAN packets. This results in dropping of large VLAN packets. This can be observed when connection tracking is enabled. Connection tracking re-assembles fragmented packets, and these have to re-fragmented when transmitting out. Also, make sure only refragmented packets are defragmented as per suggestion from Patrick McHardy. Signed-off-by: Saikiran Madugula Signed-off-by: Patrick McHardy diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index 3953ac4..e4a418f 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -788,15 +788,23 @@ static unsigned int br_nf_local_out(unsigned int hook, struct sk_buff *skb, return NF_STOLEN; } +#if defined(CONFIG_NF_CONNTRACK_IPV4) || defined(CONFIG_NF_CONNTRACK_IPV4_MODULE) static int br_nf_dev_queue_xmit(struct sk_buff *skb) { - if (skb->protocol == htons(ETH_P_IP) && + if (skb->nfct != NULL && + (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb)) && skb->len > skb->dev->mtu && !skb_is_gso(skb)) return ip_fragment(skb, br_dev_queue_push_xmit); else return br_dev_queue_push_xmit(skb); } +#else +static int br_nf_dev_queue_xmit(struct sk_buff *skb) +{ + return br_dev_queue_push_xmit(skb); +} +#endif /* PF_BRIDGE/POST_ROUTING ********************************************/ static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff *skb, -- cgit v0.10.2 From 8a577ffc75d9194fe8cdb7479236f2081c26ca1f Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 18 Apr 2009 15:05:45 -0700 Subject: driver: dont update dev_name via device_add path notice one system /proc/iomem some entries missed the name for pci_devices it turns that dev->dev.kobj name is changed after device_add. for pci code: via acpi_pci_root_driver.ops.add (aka acpi_pci_root_add) ==> pci_acpi_scan_root is used to scan pci bus/device, and at the same time we read the resource for pci_dev in the pci_read_bases, we have res->name = pci_name(pci_dev); pci_name is calling dev_name. later via acpi_pci_root_driver.ops.start (aka acpi_pci_root_start) ==> pci_bus_add_device to add all pci_dev in kobj tree. pci_bus_add_device will call device_add. actually in device_add /* first, register with generic layer. */ error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev)); if (error) goto Error; will get one new name for that kobj, old name is freed. [Impact: fix corrupted names in /proc/iomem ] Signed-off-by: Yinghai Lu Signed-off-by: Linus Torvalds diff --git a/drivers/base/core.c b/drivers/base/core.c index d230ff4..4aa527b 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -891,7 +891,8 @@ int device_add(struct device *dev) set_dev_node(dev, dev_to_node(parent)); /* first, register with generic layer. */ - error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev)); + /* we require the name to be set before, and pass NULL */ + error = kobject_add(&dev->kobj, dev->kobj.parent, NULL); if (error) goto Error; diff --git a/lib/kobject.c b/lib/kobject.c index a6dec32..bacf6fe 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -218,6 +218,9 @@ int kobject_set_name_vargs(struct kobject *kobj, const char *fmt, const char *old_name = kobj->name; char *s; + if (kobj->name && !fmt) + return 0; + kobj->name = kvasprintf(GFP_KERNEL, fmt, vargs); if (!kobj->name) return -ENOMEM; -- cgit v0.10.2 From f297bfee71df4f1cc5bacd4dea330e1241ba61ae Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 20 Apr 2009 12:46:24 +0100 Subject: FRV: Don't attempt to #include as it doesn't exist Stop the FRV arch from attempting to #include as it doesn't exist. Reported-by: Robert P. J. Day Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index 0669e13..55e4fab 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -46,7 +46,6 @@ #include #ifdef CONFIG_BLK_DEV_INITRD -#include #include #endif -- cgit v0.10.2 From a5432f5ad43822802ba6f8ba8662ca6361712044 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 20 Apr 2009 15:46:45 +0100 Subject: FS-Cache: Add MAINTAINERS record for FS-Cache and CacheFiles Add MAINTAINERS record for FS-Cache and CacheFiles. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 1e067a6..6baace3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1287,6 +1287,14 @@ S: Maintained F: Documentation/video4linux/bttv/ F: drivers/media/video/bt8xx/bttv* +CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS +P: David Howells +M: dhowells@redhat.com +L: linux-cachefs@redhat.com +S: Supported +F: Documentation/filesystems/caching/cachefiles.txt +F: fs/cachefiles/ + CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER P: Jonathan Corbet M: corbet@lwn.net @@ -2325,6 +2333,15 @@ F: Documentation/power/freezing-of-tasks.txt F: include/linux/freezer.h F: kernel/freezer.c +FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS +P: David Howells +M: dhowells@redhat.com +L: linux-cachefs@redhat.com +S: Supported +F: Documentation/filesystems/caching/ +F: fs/fscache/ +F: include/linux/fscache*.h + FTRACE P: Steven Rostedt M: rostedt@goodmis.org -- cgit v0.10.2 From fc61e6636d13eb3a23eb29b4327eeee9de0ef3bc Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Mon, 20 Apr 2009 08:25:31 -0500 Subject: x86/uv: fix for no memory at paddr 0 Fix endcase where the memory at physical address 0 does not really exist AND one of the sockets on blade 0 has no active cpus. The memory that _appears_ to be at physical address 0 is actually memory that located at a different address but has been remapped by the chipset so that it appears to be at physical address 0. When determining the UV pnode, the algorithm for determining the pnode incorrectly used the relocated physical address instead of the actual (global) address. [ Impact: boot failure on partitioned systems ] Signed-off-by: Jack Steiner LKML-Reference: <20090420132530.GA23156@sgi.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index d671233..2bda693 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -652,6 +652,7 @@ void __init uv_system_init(void) if (uv_node_to_blade[nid] >= 0) continue; paddr = node_start_pfn(nid) << PAGE_SHIFT; + paddr = uv_soc_phys_ram_to_gpa(paddr); pnode = (paddr >> m_val) & pnode_mask; blade = boot_pnode_to_blade(pnode); uv_node_to_blade[nid] = blade; -- cgit v0.10.2 From 05f0ecbda5c215279f8e0f852e1606f441a11236 Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Sat, 18 Apr 2009 12:15:23 +0900 Subject: [IA64] fix allmodconfig compilation breakage. This patch fixes the following compilation error caused by recursive inclusion of kernel.h which defines BUILD_BUG_ON(). In this case, the case it catches will be caught by the case CONFIG_PARAVIRT=n, so removing it would not hurt compile time check very much. So fix the breakage by removing it. CC arch/ia64/kernel/asm-offsets.s In file included from include/linux/bitops.h:17, from include/linux/kernel.h:15, from include/linux/sched.h:52, from arch/ia64/kernel/asm-offsets.c:9: arch/ia64/include/asm/bitops.h: In function 'set_bit': arch/ia64/include/asm/bitops.h:47: error: implicit declaration of function 'BUILD_BUG_ON' Signed-off-by: Isaku Yamahata Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h index 3d29511..8f6cb11 100644 --- a/arch/ia64/include/asm/paravirt_privop.h +++ b/arch/ia64/include/asm/paravirt_privop.h @@ -445,7 +445,6 @@ paravirt_set_rr0_to_rr4(unsigned long val0, unsigned long val1, register unsigned long ia64_intri_res asm ("r8"); \ register unsigned long __reg asm ("r8") = (reg); \ \ - BUILD_BUG_ON(!__builtin_constant_p(reg)); \ asm volatile (paravirt_alt_bundle(__PARAVIRT_BR, \ PARAVIRT_TYPE(GETREG) \ + (reg)) \ @@ -464,7 +463,6 @@ paravirt_set_rr0_to_rr4(unsigned long val0, unsigned long val1, register unsigned long ia64_clobber1 asm ("r8"); \ register unsigned long ia64_clobber2 asm ("r9"); \ \ - BUILD_BUG_ON(!__builtin_constant_p(reg)); \ asm volatile (paravirt_alt_bundle(__PARAVIRT_BR, \ PARAVIRT_TYPE(SETREG) \ + (reg)) \ -- cgit v0.10.2 From 8db70d3deee33e661d091b3e317fccc87bf0975d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 20 Apr 2009 11:33:12 -0600 Subject: powerpc/5200: defconfig updates Signed-off-by: Grant Likely diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 1239c61..3838b77 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:47:44 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -232,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -275,7 +286,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -440,7 +450,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -505,10 +514,12 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -537,6 +548,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -555,7 +568,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -657,7 +669,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -786,11 +797,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -831,7 +842,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -846,6 +856,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -853,6 +864,7 @@ CONFIG_USB_STORAGE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -863,6 +875,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -885,6 +898,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -941,6 +959,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -953,7 +972,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1024,6 +1042,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1039,11 +1058,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1061,6 +1081,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1089,9 +1112,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1099,17 +1125,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1140,10 +1168,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1211,6 +1241,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index b7b8805..29b0f34 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:14 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:04 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -95,19 +97,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -117,10 +122,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -128,6 +135,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -140,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -161,8 +168,6 @@ CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -170,6 +175,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set CONFIG_PPC_LITE5200=y +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -180,6 +186,8 @@ CONFIG_PPC_LITE5200=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -241,9 +249,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +283,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +306,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -412,6 +423,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -477,9 +489,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -502,6 +516,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -578,6 +593,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -611,6 +627,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -632,6 +650,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -642,10 +661,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -655,6 +674,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -664,6 +684,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -671,7 +692,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -795,7 +815,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -876,7 +895,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -892,6 +911,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -902,6 +922,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -924,6 +945,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -966,6 +992,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -978,7 +1005,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -994,6 +1020,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1007,11 +1034,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1029,6 +1058,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1057,9 +1089,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1067,17 +1102,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1108,10 +1145,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1180,6 +1219,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index fb10f22..07b6b26 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:42:29 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:22 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -233,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -276,7 +287,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -344,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -441,7 +451,6 @@ CONFIG_MTD_ROM=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -466,6 +475,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -516,8 +526,10 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -528,6 +540,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -556,6 +569,8 @@ CONFIG_ICPLUS_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -574,7 +589,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -665,7 +679,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -696,6 +709,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -710,11 +724,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -800,7 +817,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -810,6 +829,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -866,8 +889,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -878,6 +902,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -900,6 +925,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -956,6 +986,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -968,7 +999,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1039,6 +1069,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1054,11 +1085,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1076,6 +1108,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1104,9 +1139,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1114,17 +1152,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1155,10 +1195,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1226,6 +1268,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 00944c0..afb1a3d 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:33 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:42 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +71,7 @@ CONFIG_LOCALVERSION="trunk" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -97,18 +100,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -117,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -129,6 +134,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -141,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -162,8 +167,6 @@ CONFIG_DEFAULT_IOSCHED="noop" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -171,6 +174,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -181,6 +185,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -242,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -290,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -340,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -352,7 +362,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -451,7 +460,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -504,6 +512,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -580,6 +589,7 @@ CONFIG_PATA_MPC52xx=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -613,6 +623,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -636,7 +648,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -702,6 +713,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -767,7 +779,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -889,11 +900,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -934,7 +945,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -949,6 +959,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1007,8 +1018,9 @@ CONFIG_RTC_DRV_PCF8563=m # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1019,6 +1031,7 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1040,6 +1053,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1096,6 +1114,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1107,7 +1126,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1162,6 +1180,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1177,11 +1196,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1200,13 +1219,25 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 65237ad..8585c7c 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:42:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:57 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -138,7 +146,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,8 +166,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -168,6 +173,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -178,6 +184,8 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -238,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -281,7 +292,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -337,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -514,8 +523,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -527,6 +538,7 @@ CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -555,6 +567,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -573,7 +587,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -675,7 +688,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -706,6 +718,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -720,11 +733,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -857,11 +873,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -902,7 +918,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -917,6 +932,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -976,8 +992,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -988,6 +1005,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1010,6 +1028,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1066,6 +1089,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1078,7 +1102,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1149,6 +1172,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1164,11 +1188,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1186,6 +1211,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1214,9 +1242,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1224,17 +1255,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1265,10 +1298,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1337,6 +1372,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index af0cd55..aaa4416 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Fri Feb 6 09:48:53 2009 +# Linux kernel version: 2.6.30-rc2 +# Mon Apr 20 11:06:25 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -39,6 +40,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -55,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -91,19 +94,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,10 +119,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -124,6 +132,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -136,7 +145,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,8 +165,6 @@ CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -166,8 +172,9 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_EFIKA=y CONFIG_PPC_LITE5200=y +CONFIG_PPC_MEDIA5200=y CONFIG_PPC_MPC5200_BUGFIX=y -# CONFIG_PPC_MPC5200_GPIO is not set +CONFIG_PPC_MPC5200_GPIO=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -176,7 +183,9 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -241,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +307,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -388,12 +400,9 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -447,6 +456,8 @@ CONFIG_MTD_PHYSMAP_OF=y # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -465,14 +476,23 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -500,12 +520,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y @@ -564,9 +586,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -589,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -666,6 +691,7 @@ CONFIG_PATA_PLATFORM=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -699,6 +725,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -722,7 +751,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -802,6 +830,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -854,6 +883,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -883,22 +913,63 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_MPC52xx_PSC=m + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -915,10 +986,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -929,11 +1002,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -952,6 +1030,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -989,6 +1068,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set @@ -1084,9 +1164,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y @@ -1127,15 +1211,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y # CONFIG_HID_APPLE is not set CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set @@ -1204,11 +1290,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1250,7 +1336,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1265,6 +1350,8 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1317,6 +1404,13 @@ CONFIG_RTC_DRV_DS1307=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers @@ -1336,8 +1430,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1348,6 +1443,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1370,6 +1466,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1416,6 +1517,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1426,6 +1533,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1438,7 +1546,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1493,6 +1600,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1500,7 +1608,7 @@ CONFIG_NLS_ISO8859_1=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1508,11 +1616,14 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1530,6 +1641,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1558,9 +1672,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1568,17 +1685,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1609,10 +1728,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1680,8 +1801,9 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=m # # Random Number Generation -- cgit v0.10.2 From 6d25b688ecc488753af3c9e6f6a9a575b863cf37 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Mon, 20 Apr 2009 12:18:43 -0600 Subject: powerpc: Fix of_node_put() exit path in of_irq_map_one() Signed-off-by: Grant Likely diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 8f0856f..8362620 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -971,7 +971,7 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq struct device_node *p; const u32 *intspec, *tmp, *addr; u32 intsize, intlen; - int res; + int res = -EINVAL; DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index); @@ -995,21 +995,20 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq /* Get size of interrupt specifier */ tmp = of_get_property(p, "#interrupt-cells", NULL); - if (tmp == NULL) { - of_node_put(p); - return -EINVAL; - } + if (tmp == NULL) + goto out; intsize = *tmp; DBG(" intsize=%d intlen=%d\n", intsize, intlen); /* Check index */ if ((index + 1) * intsize > intlen) - return -EINVAL; + goto out; /* Get new specifier and map it */ res = of_irq_map_raw(p, intspec + index * intsize, intsize, addr, out_irq); +out: of_node_put(p); return res; } -- cgit v0.10.2 From ffbd517d5a8c8e93ddd11046434fb029f3df73aa Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 20 Apr 2009 15:50:09 -0400 Subject: Btrfs: use WRITE_SYNC for synchronous writes Part of reducing fsync/O_SYNC/O_DIRECT latencies is using WRITE_SYNC for writes we plan on waiting on in the near future. This patch mirrors recent changes in other filesystems and the generic code to use WRITE_SYNC when WB_SYNC_ALL is passed and to use WRITE_SYNC for other latency critical writes. Btrfs uses async worker threads for checksumming before the write is done, and then again to actually submit the bios. The bio submission code just runs a per-device list of bios that need to be sent down the pipe. This list is split into low priority and high priority lists so the WRITE_SYNC IO happens first. Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 92caa80..fec18b4 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2095,10 +2095,10 @@ static int write_dev_supers(struct btrfs_device *device, device->barriers = 0; get_bh(bh); lock_buffer(bh); - ret = submit_bh(WRITE, bh); + ret = submit_bh(WRITE_SYNC, bh); } } else { - ret = submit_bh(WRITE, bh); + ret = submit_bh(WRITE_SYNC, bh); } if (!ret && wait) { diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index eb2bee8..483b672 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -50,7 +50,10 @@ struct extent_page_data { /* tells writepage not to lock the state bits for this range * it still does the unlocking */ - int extent_locked; + unsigned int extent_locked:1; + + /* tells the submit_bio code to use a WRITE_SYNC */ + unsigned int sync_io:1; }; int __init extent_io_init(void) @@ -2136,8 +2139,14 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc, u64 delalloc_end; int page_started; int compressed; + int write_flags; unsigned long nr_written = 0; + if (wbc->sync_mode == WB_SYNC_ALL) + write_flags = WRITE_SYNC_PLUG; + else + write_flags = WRITE; + WARN_ON(!PageLocked(page)); pg_offset = i_size & (PAGE_CACHE_SIZE - 1); if (page->index > end_index || @@ -2314,9 +2323,9 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc, (unsigned long long)end); } - ret = submit_extent_page(WRITE, tree, page, sector, - iosize, pg_offset, bdev, - &epd->bio, max_nr, + ret = submit_extent_page(write_flags, tree, page, + sector, iosize, pg_offset, + bdev, &epd->bio, max_nr, end_bio_extent_writepage, 0, 0, 0); if (ret) @@ -2460,15 +2469,23 @@ retry: return ret; } -static noinline void flush_write_bio(void *data) +static void flush_epd_write_bio(struct extent_page_data *epd) { - struct extent_page_data *epd = data; if (epd->bio) { - submit_one_bio(WRITE, epd->bio, 0, 0); + if (epd->sync_io) + submit_one_bio(WRITE_SYNC, epd->bio, 0, 0); + else + submit_one_bio(WRITE, epd->bio, 0, 0); epd->bio = NULL; } } +static noinline void flush_write_bio(void *data) +{ + struct extent_page_data *epd = data; + flush_epd_write_bio(epd); +} + int extent_write_full_page(struct extent_io_tree *tree, struct page *page, get_extent_t *get_extent, struct writeback_control *wbc) @@ -2480,6 +2497,7 @@ int extent_write_full_page(struct extent_io_tree *tree, struct page *page, .tree = tree, .get_extent = get_extent, .extent_locked = 0, + .sync_io = wbc->sync_mode == WB_SYNC_ALL, }; struct writeback_control wbc_writepages = { .bdi = wbc->bdi, @@ -2490,13 +2508,11 @@ int extent_write_full_page(struct extent_io_tree *tree, struct page *page, .range_end = (loff_t)-1, }; - ret = __extent_writepage(page, wbc, &epd); extent_write_cache_pages(tree, mapping, &wbc_writepages, __extent_writepage, &epd, flush_write_bio); - if (epd.bio) - submit_one_bio(WRITE, epd.bio, 0, 0); + flush_epd_write_bio(&epd); return ret; } @@ -2515,6 +2531,7 @@ int extent_write_locked_range(struct extent_io_tree *tree, struct inode *inode, .tree = tree, .get_extent = get_extent, .extent_locked = 1, + .sync_io = mode == WB_SYNC_ALL, }; struct writeback_control wbc_writepages = { .bdi = inode->i_mapping->backing_dev_info, @@ -2540,8 +2557,7 @@ int extent_write_locked_range(struct extent_io_tree *tree, struct inode *inode, start += PAGE_CACHE_SIZE; } - if (epd.bio) - submit_one_bio(WRITE, epd.bio, 0, 0); + flush_epd_write_bio(&epd); return ret; } @@ -2556,13 +2572,13 @@ int extent_writepages(struct extent_io_tree *tree, .tree = tree, .get_extent = get_extent, .extent_locked = 0, + .sync_io = wbc->sync_mode == WB_SYNC_ALL, }; ret = extent_write_cache_pages(tree, mapping, wbc, __extent_writepage, &epd, flush_write_bio); - if (epd.bio) - submit_one_bio(WRITE, epd.bio, 0, 0); + flush_epd_write_bio(&epd); return ret; } diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index 53c87b1..d6f0806 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -489,7 +489,7 @@ again: /* start IO across the range first to instantiate any delalloc * extents */ - btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_NONE); + btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL); /* The compression code will leave pages locked but return from * writepage without setting the page writeback. Starting again diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index e0913e4..e53835b 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -125,6 +125,20 @@ static noinline struct btrfs_fs_devices *find_fsid(u8 *fsid) return NULL; } +static void requeue_list(struct btrfs_pending_bios *pending_bios, + struct bio *head, struct bio *tail) +{ + + struct bio *old_head; + + old_head = pending_bios->head; + pending_bios->head = head; + if (pending_bios->tail) + tail->bi_next = old_head; + else + pending_bios->tail = tail; +} + /* * we try to collect pending bios for a device so we don't get a large * number of procs sending bios down to the same device. This greatly @@ -141,10 +155,12 @@ static noinline int run_scheduled_bios(struct btrfs_device *device) struct bio *pending; struct backing_dev_info *bdi; struct btrfs_fs_info *fs_info; + struct btrfs_pending_bios *pending_bios; struct bio *tail; struct bio *cur; int again = 0; - unsigned long num_run = 0; + unsigned long num_run; + unsigned long num_sync_run; unsigned long limit; unsigned long last_waited = 0; @@ -153,20 +169,30 @@ static noinline int run_scheduled_bios(struct btrfs_device *device) limit = btrfs_async_submit_limit(fs_info); limit = limit * 2 / 3; + /* we want to make sure that every time we switch from the sync + * list to the normal list, we unplug + */ + num_sync_run = 0; + loop: spin_lock(&device->io_lock); + num_run = 0; loop_lock: + /* take all the bios off the list at once and process them * later on (without the lock held). But, remember the * tail and other pointers so the bios can be properly reinserted * into the list if we hit congestion */ - pending = device->pending_bios; - tail = device->pending_bio_tail; + if (device->pending_sync_bios.head) + pending_bios = &device->pending_sync_bios; + else + pending_bios = &device->pending_bios; + + pending = pending_bios->head; + tail = pending_bios->tail; WARN_ON(pending && !tail); - device->pending_bios = NULL; - device->pending_bio_tail = NULL; /* * if pending was null this time around, no bios need processing @@ -176,16 +202,41 @@ loop_lock: * device->running_pending is used to synchronize with the * schedule_bio code. */ - if (pending) { - again = 1; - device->running_pending = 1; - } else { + if (device->pending_sync_bios.head == NULL && + device->pending_bios.head == NULL) { again = 0; device->running_pending = 0; + } else { + again = 1; + device->running_pending = 1; } + + pending_bios->head = NULL; + pending_bios->tail = NULL; + spin_unlock(&device->io_lock); + /* + * if we're doing the regular priority list, make sure we unplug + * for any high prio bios we've sent down + */ + if (pending_bios == &device->pending_bios && num_sync_run > 0) { + num_sync_run = 0; + blk_run_backing_dev(bdi, NULL); + } + while (pending) { + + rmb(); + if (pending_bios != &device->pending_sync_bios && + device->pending_sync_bios.head && + num_run > 16) { + cond_resched(); + spin_lock(&device->io_lock); + requeue_list(pending_bios, pending, tail); + goto loop_lock; + } + cur = pending; pending = pending->bi_next; cur->bi_next = NULL; @@ -196,10 +247,18 @@ loop_lock: wake_up(&fs_info->async_submit_wait); BUG_ON(atomic_read(&cur->bi_cnt) == 0); - bio_get(cur); submit_bio(cur->bi_rw, cur); - bio_put(cur); num_run++; + if (bio_sync(cur)) + num_sync_run++; + + if (need_resched()) { + if (num_sync_run) { + blk_run_backing_dev(bdi, NULL); + num_sync_run = 0; + } + cond_resched(); + } /* * we made progress, there is more work to do and the bdi @@ -208,7 +267,6 @@ loop_lock: */ if (pending && bdi_write_congested(bdi) && num_run > 16 && fs_info->fs_devices->open_devices > 1) { - struct bio *old_head; struct io_context *ioc; ioc = current->io_context; @@ -233,17 +291,17 @@ loop_lock: * against it before looping */ last_waited = ioc->last_waited; + if (need_resched()) { + if (num_sync_run) { + blk_run_backing_dev(bdi, NULL); + num_sync_run = 0; + } + cond_resched(); + } continue; } spin_lock(&device->io_lock); - - old_head = device->pending_bios; - device->pending_bios = pending; - if (device->pending_bio_tail) - tail->bi_next = old_head; - else - device->pending_bio_tail = tail; - + requeue_list(pending_bios, pending, tail); device->running_pending = 1; spin_unlock(&device->io_lock); @@ -251,11 +309,18 @@ loop_lock: goto done; } } + + if (num_sync_run) { + num_sync_run = 0; + blk_run_backing_dev(bdi, NULL); + } + + cond_resched(); if (again) goto loop; spin_lock(&device->io_lock); - if (device->pending_bios) + if (device->pending_bios.head || device->pending_sync_bios.head) goto loop_lock; spin_unlock(&device->io_lock); @@ -2497,7 +2562,7 @@ again: max_errors = 1; } } - if (multi_ret && rw == WRITE && + if (multi_ret && (rw & (1 << BIO_RW)) && stripes_allocated < stripes_required) { stripes_allocated = map->num_stripes; free_extent_map(em); @@ -2762,6 +2827,7 @@ static noinline int schedule_bio(struct btrfs_root *root, int rw, struct bio *bio) { int should_queue = 1; + struct btrfs_pending_bios *pending_bios; /* don't bother with additional async steps for reads, right now */ if (!(rw & (1 << BIO_RW))) { @@ -2783,13 +2849,17 @@ static noinline int schedule_bio(struct btrfs_root *root, bio->bi_rw |= rw; spin_lock(&device->io_lock); + if (bio_sync(bio)) + pending_bios = &device->pending_sync_bios; + else + pending_bios = &device->pending_bios; - if (device->pending_bio_tail) - device->pending_bio_tail->bi_next = bio; + if (pending_bios->tail) + pending_bios->tail->bi_next = bio; - device->pending_bio_tail = bio; - if (!device->pending_bios) - device->pending_bios = bio; + pending_bios->tail = bio; + if (!pending_bios->head) + pending_bios->head = bio; if (device->running_pending) should_queue = 0; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index 2185de7..5836327 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -23,13 +23,22 @@ #include "async-thread.h" struct buffer_head; +struct btrfs_pending_bios { + struct bio *head; + struct bio *tail; +}; + struct btrfs_device { struct list_head dev_list; struct list_head dev_alloc_list; struct btrfs_fs_devices *fs_devices; struct btrfs_root *dev_root; - struct bio *pending_bios; - struct bio *pending_bio_tail; + + /* regular prio bios */ + struct btrfs_pending_bios pending_bios; + /* WRITE_SYNC bios */ + struct btrfs_pending_bios pending_sync_bios; + int running_pending; u64 generation; -- cgit v0.10.2 From d313d7a31a752c88f7288692bd98e66d0789779b Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 20 Apr 2009 15:50:09 -0400 Subject: Btrfs: add a priority queue to the async thread helpers Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a higher priority. But, the checksumming helper threads prevent it from being fully effective. There are two problems. First, a big queue of pending checksumming will delay the synchronous IO behind other lower priority writes. Second, the checksumming uses an ordered async work queue. The ordering makes sure that IOs are sent to the block layer in the same order they are sent to the checksumming threads. Usually this gives us less seeky IO. But, when we start mixing IO priorities, the lower priority IO can delay the higher priority IO. This patch solves both problems by adding a high priority list to the async helper threads, and a new btrfs_set_work_high_prio(), which is used to make put a new async work item onto the higher priority list. The ordering is still done on high priority IO, but all of the high priority bios are ordered separately from the low priority bios. This ordering is purely an IO optimization, it is not involved in data or metadata integrity. Signed-off-by: Chris Mason diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index 51bfdfc..502c3d6 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -25,6 +25,7 @@ #define WORK_QUEUED_BIT 0 #define WORK_DONE_BIT 1 #define WORK_ORDER_DONE_BIT 2 +#define WORK_HIGH_PRIO_BIT 3 /* * container for the kthread task pointer and the list of pending work @@ -36,6 +37,7 @@ struct btrfs_worker_thread { /* list of struct btrfs_work that are waiting for service */ struct list_head pending; + struct list_head prio_pending; /* list of worker threads from struct btrfs_workers */ struct list_head worker_list; @@ -103,10 +105,16 @@ static noinline int run_ordered_completions(struct btrfs_workers *workers, spin_lock_irqsave(&workers->lock, flags); - while (!list_empty(&workers->order_list)) { - work = list_entry(workers->order_list.next, - struct btrfs_work, order_list); - + while (1) { + if (!list_empty(&workers->prio_order_list)) { + work = list_entry(workers->prio_order_list.next, + struct btrfs_work, order_list); + } else if (!list_empty(&workers->order_list)) { + work = list_entry(workers->order_list.next, + struct btrfs_work, order_list); + } else { + break; + } if (!test_bit(WORK_DONE_BIT, &work->flags)) break; @@ -143,8 +151,14 @@ static int worker_loop(void *arg) do { spin_lock_irq(&worker->lock); again_locked: - while (!list_empty(&worker->pending)) { - cur = worker->pending.next; + while (1) { + if (!list_empty(&worker->prio_pending)) + cur = worker->prio_pending.next; + else if (!list_empty(&worker->pending)) + cur = worker->pending.next; + else + break; + work = list_entry(cur, struct btrfs_work, list); list_del(&work->list); clear_bit(WORK_QUEUED_BIT, &work->flags); @@ -163,7 +177,6 @@ again_locked: spin_lock_irq(&worker->lock); check_idle_worker(worker); - } if (freezing(current)) { worker->working = 0; @@ -178,7 +191,8 @@ again_locked: * jump_in? */ smp_mb(); - if (!list_empty(&worker->pending)) + if (!list_empty(&worker->pending) || + !list_empty(&worker->prio_pending)) continue; /* @@ -191,7 +205,8 @@ again_locked: */ schedule_timeout(1); smp_mb(); - if (!list_empty(&worker->pending)) + if (!list_empty(&worker->pending) || + !list_empty(&worker->prio_pending)) continue; if (kthread_should_stop()) @@ -200,7 +215,8 @@ again_locked: /* still no more work?, sleep for real */ spin_lock_irq(&worker->lock); set_current_state(TASK_INTERRUPTIBLE); - if (!list_empty(&worker->pending)) + if (!list_empty(&worker->pending) || + !list_empty(&worker->prio_pending)) goto again_locked; /* @@ -248,6 +264,7 @@ void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max) INIT_LIST_HEAD(&workers->worker_list); INIT_LIST_HEAD(&workers->idle_list); INIT_LIST_HEAD(&workers->order_list); + INIT_LIST_HEAD(&workers->prio_order_list); spin_lock_init(&workers->lock); workers->max_workers = max; workers->idle_thresh = 32; @@ -273,6 +290,7 @@ int btrfs_start_workers(struct btrfs_workers *workers, int num_workers) } INIT_LIST_HEAD(&worker->pending); + INIT_LIST_HEAD(&worker->prio_pending); INIT_LIST_HEAD(&worker->worker_list); spin_lock_init(&worker->lock); atomic_set(&worker->num_pending, 0); @@ -396,7 +414,10 @@ int btrfs_requeue_work(struct btrfs_work *work) goto out; spin_lock_irqsave(&worker->lock, flags); - list_add_tail(&work->list, &worker->pending); + if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags)) + list_add_tail(&work->list, &worker->prio_pending); + else + list_add_tail(&work->list, &worker->pending); atomic_inc(&worker->num_pending); /* by definition we're busy, take ourselves off the idle @@ -422,6 +443,11 @@ out: return 0; } +void btrfs_set_work_high_prio(struct btrfs_work *work) +{ + set_bit(WORK_HIGH_PRIO_BIT, &work->flags); +} + /* * places a struct btrfs_work into the pending queue of one of the kthreads */ @@ -438,7 +464,12 @@ int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) worker = find_worker(workers); if (workers->ordered) { spin_lock_irqsave(&workers->lock, flags); - list_add_tail(&work->order_list, &workers->order_list); + if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags)) { + list_add_tail(&work->order_list, + &workers->prio_order_list); + } else { + list_add_tail(&work->order_list, &workers->order_list); + } spin_unlock_irqrestore(&workers->lock, flags); } else { INIT_LIST_HEAD(&work->order_list); @@ -446,7 +477,10 @@ int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) spin_lock_irqsave(&worker->lock, flags); - list_add_tail(&work->list, &worker->pending); + if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags)) + list_add_tail(&work->list, &worker->prio_pending); + else + list_add_tail(&work->list, &worker->pending); atomic_inc(&worker->num_pending); check_busy_worker(worker); diff --git a/fs/btrfs/async-thread.h b/fs/btrfs/async-thread.h index 31be4ed..1b511c1 100644 --- a/fs/btrfs/async-thread.h +++ b/fs/btrfs/async-thread.h @@ -85,6 +85,7 @@ struct btrfs_workers { * of work items waiting for completion */ struct list_head order_list; + struct list_head prio_order_list; /* lock for finding the next worker thread to queue on */ spinlock_t lock; @@ -98,4 +99,5 @@ int btrfs_start_workers(struct btrfs_workers *workers, int num_workers); int btrfs_stop_workers(struct btrfs_workers *workers); void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max); int btrfs_requeue_work(struct btrfs_work *work); +void btrfs_set_work_high_prio(struct btrfs_work *work); #endif diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index fec18b4..a6b8374 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -579,6 +579,10 @@ int btrfs_wq_submit_bio(struct btrfs_fs_info *fs_info, struct inode *inode, async->bio_flags = bio_flags; atomic_inc(&fs_info->nr_async_submits); + + if (rw & (1 << BIO_RW_SYNCIO)) + btrfs_set_work_high_prio(&async->work); + btrfs_queue_worker(&fs_info->workers, &async->work); #if 0 int limit = btrfs_async_submit_limit(fs_info); @@ -656,6 +660,7 @@ static int btree_submit_bio_hook(struct inode *inode, int rw, struct bio *bio, return btrfs_map_bio(BTRFS_I(inode)->root, rw, bio, mirror_num, 0); } + /* * kthread helpers are used to submit writes so that checksumming * can happen in parallel across all CPUs diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 483b672..5d66cb2 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2501,7 +2501,7 @@ int extent_write_full_page(struct extent_io_tree *tree, struct page *page, }; struct writeback_control wbc_writepages = { .bdi = wbc->bdi, - .sync_mode = WB_SYNC_NONE, + .sync_mode = wbc->sync_mode, .older_than_this = NULL, .nr_to_write = 64, .range_start = page_offset(page) + PAGE_CACHE_SIZE, diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 9c9fb46..e21c006 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1131,7 +1131,7 @@ static ssize_t btrfs_file_write(struct file *file, const char __user *buf, if (will_write) { btrfs_fdatawrite_range(inode->i_mapping, pos, pos + write_bytes - 1, - WB_SYNC_NONE); + WB_SYNC_ALL); } else { balance_dirty_pages_ratelimited_nr(inode->i_mapping, num_pages); -- cgit v0.10.2 From 11c8349b4eb68f2b04cd8ece577377e6c0e5dd4b Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 20 Apr 2009 15:50:09 -0400 Subject: Btrfs: fix oops on page->mapping->host during writepage The extent_io writepage call updates the writepage index in the inode as it makes progress. But, it was doing the update after unlocking the page, which isn't legal because page->mapping can't be trusted once the page is unlocked. This lead to an oops, especially common with compression turned on. The fix here is to update the writeback index before unlocking the page. Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 5d66cb2..05a1c42 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2104,6 +2104,16 @@ int extent_read_full_page(struct extent_io_tree *tree, struct page *page, return ret; } +static noinline void update_nr_written(struct page *page, + struct writeback_control *wbc, + unsigned long nr_written) +{ + wbc->nr_to_write -= nr_written; + if (wbc->range_cyclic || (wbc->nr_to_write > 0 && + wbc->range_start == 0 && wbc->range_end == LLONG_MAX)) + page->mapping->writeback_index = page->index + nr_written; +} + /* * the writepage semantics are similar to regular writepage. extent * records are inserted to lock ranges in the tree, and as dirty areas @@ -2173,6 +2183,12 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc, delalloc_end = 0; page_started = 0; if (!epd->extent_locked) { + /* + * make sure the wbc mapping index is at least updated + * to this page. + */ + update_nr_written(page, wbc, 0); + while (delalloc_end < page_end) { nr_delalloc = find_lock_delalloc_range(inode, tree, page, @@ -2194,7 +2210,13 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc, */ if (page_started) { ret = 0; - goto update_nr_written; + /* + * we've unlocked the page, so we can't update + * the mapping's writeback index, just update + * nr_to_write. + */ + wbc->nr_to_write -= nr_written; + goto done_unlocked; } } lock_extent(tree, start, page_end, GFP_NOFS); @@ -2207,13 +2229,18 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc, if (ret == -EAGAIN) { unlock_extent(tree, start, page_end, GFP_NOFS); redirty_page_for_writepage(wbc, page); + update_nr_written(page, wbc, nr_written); unlock_page(page); ret = 0; - goto update_nr_written; + goto done_unlocked; } } - nr_written++; + /* + * we don't want to touch the inode after unlocking the page, + * so we update the mapping writeback index now + */ + update_nr_written(page, wbc, nr_written + 1); end = page_end; if (test_range_bit(tree, start, page_end, EXTENT_DELALLOC, 0)) @@ -2345,11 +2372,8 @@ done: unlock_extent(tree, unlock_start, page_end, GFP_NOFS); unlock_page(page); -update_nr_written: - wbc->nr_to_write -= nr_written; - if (wbc->range_cyclic || (wbc->nr_to_write > 0 && - wbc->range_start == 0 && wbc->range_end == LLONG_MAX)) - page->mapping->writeback_index = page->index + nr_written; +done_unlocked: + return 0; } -- cgit v0.10.2 From 8c594ea81d7abbbffdda447b127f8ba8d76f319d Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 20 Apr 2009 15:50:10 -0400 Subject: Btrfs: use the right node in reada_for_balance reada_for_balance was using the wrong index into the path node array, so it wasn't reading the right blocks. We never directly used the results of the read done by this function because the btree search is started over at the end. This fixes reada_for_balance to reada in the correct node and to avoid searching past the last slot in the node. It also makes sure to hold the parent lock while we are finding the nodes to read. Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index e5b2533..a99f1c2 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1325,12 +1325,12 @@ static noinline int reada_for_balance(struct btrfs_root *root, int ret = 0; int blocksize; - parent = path->nodes[level - 1]; + parent = path->nodes[level + 1]; if (!parent) return 0; nritems = btrfs_header_nritems(parent); - slot = path->slots[level]; + slot = path->slots[level + 1]; blocksize = btrfs_level_size(root, level); if (slot > 0) { @@ -1341,7 +1341,7 @@ static noinline int reada_for_balance(struct btrfs_root *root, block1 = 0; free_extent_buffer(eb); } - if (slot < nritems) { + if (slot + 1 < nritems) { block2 = btrfs_node_blockptr(parent, slot + 1); gen = btrfs_node_ptr_generation(parent, slot + 1); eb = btrfs_find_tree_block(root, block2, blocksize); @@ -1351,7 +1351,11 @@ static noinline int reada_for_balance(struct btrfs_root *root, } if (block1 || block2) { ret = -EAGAIN; + + /* release the whole path */ btrfs_release_path(root, path); + + /* read the blocks */ if (block1) readahead_tree_block(root, block1, blocksize, 0); if (block2) @@ -1361,7 +1365,7 @@ static noinline int reada_for_balance(struct btrfs_root *root, eb = read_tree_block(root, block1, blocksize, 0); free_extent_buffer(eb); } - if (block1) { + if (block2) { eb = read_tree_block(root, block2, blocksize, 0); free_extent_buffer(eb); } @@ -1481,12 +1485,15 @@ read_block_for_search(struct btrfs_trans_handle *trans, * of the btree by dropping locks before * we read. */ - btrfs_release_path(NULL, p); + btrfs_unlock_up_safe(p, level + 1); + btrfs_set_path_blocking(p); + if (tmp) free_extent_buffer(tmp); if (p->reada) reada_for_search(root, p, level, slot, key->objectid); + btrfs_release_path(NULL, p); tmp = read_tree_block(root, blocknr, blocksize, gen); if (tmp) free_extent_buffer(tmp); -- cgit v0.10.2 From 499a214ca2765522d6a59ff73825d40e7bb31510 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 28 Mar 2009 20:51:58 +0100 Subject: rt2x00: Don't free register information on suspend After suspend & resume the rt2x00 devices won't wakeup anymore due to a broken register information setup. The most important problem is the release of the EEPROM buffer which is completely cleared and never read again after the suspend. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 43fa0f8..9730b4f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -369,8 +369,6 @@ int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state) if (retval) return retval; - rt2x00pci_free_reg(rt2x00dev); - pci_save_state(pci_dev); pci_disable_device(pci_dev); return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); @@ -381,7 +379,6 @@ int rt2x00pci_resume(struct pci_dev *pci_dev) { struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; if (pci_set_power_state(pci_dev, PCI_D0) || pci_enable_device(pci_dev) || @@ -390,20 +387,7 @@ int rt2x00pci_resume(struct pci_dev *pci_dev) return -EIO; } - retval = rt2x00pci_alloc_reg(rt2x00dev); - if (retval) - return retval; - - retval = rt2x00lib_resume(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00pci_free_reg(rt2x00dev); - - return retval; + return rt2x00lib_resume(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00pci_resume); #endif /* CONFIG_PM */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 7d50ca8..5015448 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -702,8 +702,6 @@ int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) if (retval) return retval; - rt2x00usb_free_reg(rt2x00dev); - /* * Decrease usbdev refcount. */ @@ -717,24 +715,10 @@ int rt2x00usb_resume(struct usb_interface *usb_intf) { struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; usb_get_dev(interface_to_usbdev(usb_intf)); - retval = rt2x00usb_alloc_reg(rt2x00dev); - if (retval) - return retval; - - retval = rt2x00lib_resume(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00usb_free_reg(rt2x00dev); - - return retval; + return rt2x00lib_resume(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00usb_resume); #endif /* CONFIG_PM */ -- cgit v0.10.2 From 125143966f02bd7366eb9040aa74392d19955da8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 16 Apr 2009 16:23:26 -0700 Subject: iwl3945-base.c: Add missing space to debug print "not" is not printed without a space after %pM Signed-off-by: Joe Perches Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 8d738d7..da61ecd 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4075,7 +4075,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (!static_key) { sta_id = iwl3945_hw_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_MAC80211(priv, "leave - %pMnot in station map.\n", + IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n", addr); return -EINVAL; } -- cgit v0.10.2 From c3b93c878d7912a01467890bc0785071c2dc4bc1 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 17 Apr 2009 15:14:22 +0200 Subject: p54: deactivate broken powersave function This patch deactivates powersave in station mode. It does not work correctly yet, so the code does more harm than good. Reported-by: Johannes Berg Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 0c1b057..c8f0232 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -2543,8 +2543,6 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) priv->basic_rate_mask = 0x15f; skb_queue_head_init(&priv->tx_queue); dev->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; -- cgit v0.10.2 From 230f7af0d8f6f2019e64920378b3b66e7d3e99a5 Mon Sep 17 00:00:00 2001 From: Joerg Albert Date: Sat, 18 Apr 2009 02:10:45 +0200 Subject: mwl8k: fix module re-insertion bug swap mwl8k_remove and mwl8k_shutdown functions to allow "rmmod mwl8k; modprobe mwl8k" Signed-off-by: Joerg Albert Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 57a0268..b5dbf6d 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3720,12 +3720,12 @@ err_free_reg: return rc; } -static void __devexit mwl8k_remove(struct pci_dev *pdev) +static void __devexit mwl8k_shutdown(struct pci_dev *pdev) { printk(KERN_ERR "===>%s(%u)\n", __func__, __LINE__); } -static void __devexit mwl8k_shutdown(struct pci_dev *pdev) +static void __devexit mwl8k_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct mwl8k_priv *priv; -- cgit v0.10.2 From 18aaab15f9a9cd4f20dc596aa38408c5e5d208ed Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 18 Apr 2009 09:33:55 -0400 Subject: MAC80211: Remove unused MAC80211_VERBOSE_SPECT_MGMT_DEBUG. Remove this unused Kconfig variable, which Intel apparently once promised to make use of but never did. Signed-off-by: Robert P. J. Day Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index f3d9ae3..ecc3faf 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -202,10 +202,3 @@ config MAC80211_DEBUG_COUNTERS and show them in debugfs. If unsure, say N. - -config MAC80211_VERBOSE_SPECT_MGMT_DEBUG - bool "Verbose Spectrum Management (IEEE 802.11h)debugging" - depends on MAC80211_DEBUG_MENU - ---help--- - Say Y here to print out verbose Spectrum Management (IEEE 802.11h) - debug messages. -- cgit v0.10.2 From e10a9dfc35ae6bd62bbb83df08297ea06b54d9ce Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 18 Apr 2009 17:12:18 +0200 Subject: ar9170usb: fix hang on resume This patch fixes a hang on resume when the filesystem is not available and request_firmware blocks. However, the device does not accept the firmware on resume. and it will exit with: > firmware part 1 upload failed (-71). > device is in a bad state. please reconnect it! Reported-by: Johannes Berg Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c index c9e422e..fddda47 100644 --- a/drivers/net/wireless/ar9170/usb.c +++ b/drivers/net/wireless/ar9170/usb.c @@ -623,6 +623,39 @@ static int ar9170_usb_open(struct ar9170 *ar) return 0; } +static int ar9170_usb_init_device(struct ar9170_usb *aru) +{ + int err; + + err = ar9170_usb_alloc_rx_irq_urb(aru); + if (err) + goto err_out; + + err = ar9170_usb_alloc_rx_bulk_urbs(aru); + if (err) + goto err_unrx; + + err = ar9170_usb_upload_firmware(aru); + if (err) { + err = ar9170_echo_test(&aru->common, 0x60d43110); + if (err) { + /* force user invention, by disabling the device */ + err = usb_driver_set_configuration(aru->udev, -1); + dev_err(&aru->udev->dev, "device is in a bad state. " + "please reconnect it!\n"); + goto err_unrx; + } + } + + return 0; + +err_unrx: + ar9170_usb_cancel_urbs(aru); + +err_out: + return err; +} + static int ar9170_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -658,32 +691,16 @@ static int ar9170_usb_probe(struct usb_interface *intf, err = ar9170_usb_reset(aru); if (err) - goto err_unlock; + goto err_freehw; err = ar9170_usb_request_firmware(aru); if (err) - goto err_unlock; + goto err_freehw; - err = ar9170_usb_alloc_rx_irq_urb(aru); + err = ar9170_usb_init_device(aru); if (err) goto err_freefw; - err = ar9170_usb_alloc_rx_bulk_urbs(aru); - if (err) - goto err_unrx; - - err = ar9170_usb_upload_firmware(aru); - if (err) { - err = ar9170_echo_test(&aru->common, 0x60d43110); - if (err) { - /* force user invention, by disabling the device */ - err = usb_driver_set_configuration(aru->udev, -1); - dev_err(&aru->udev->dev, "device is in a bad state. " - "please reconnect it!\n"); - goto err_unrx; - } - } - err = ar9170_usb_open(ar); if (err) goto err_unrx; @@ -703,7 +720,7 @@ err_freefw: release_firmware(aru->init_values); release_firmware(aru->firmware); -err_unlock: +err_freehw: usb_set_intfdata(intf, NULL); usb_put_dev(udev); ieee80211_free_hw(ar->hw); @@ -730,12 +747,65 @@ static void ar9170_usb_disconnect(struct usb_interface *intf) ieee80211_free_hw(aru->common.hw); } +#ifdef CONFIG_PM +static int ar9170_suspend(struct usb_interface *intf, + pm_message_t message) +{ + struct ar9170_usb *aru = usb_get_intfdata(intf); + + if (!aru) + return -ENODEV; + + aru->common.state = AR9170_IDLE; + ar9170_usb_cancel_urbs(aru); + + return 0; +} + +static int ar9170_resume(struct usb_interface *intf) +{ + struct ar9170_usb *aru = usb_get_intfdata(intf); + int err; + + if (!aru) + return -ENODEV; + + usb_unpoison_anchored_urbs(&aru->rx_submitted); + usb_unpoison_anchored_urbs(&aru->tx_submitted); + + /* + * FIXME: firmware upload will fail on resume. + * but this is better than a hang! + */ + + err = ar9170_usb_init_device(aru); + if (err) + goto err_unrx; + + err = ar9170_usb_open(&aru->common); + if (err) + goto err_unrx; + + return 0; + +err_unrx: + aru->common.state = AR9170_IDLE; + ar9170_usb_cancel_urbs(aru); + + return err; +} +#endif /* CONFIG_PM */ + static struct usb_driver ar9170_driver = { .name = "ar9170usb", .probe = ar9170_usb_probe, .disconnect = ar9170_usb_disconnect, .id_table = ar9170_usb_ids, .soft_unbind = 1, +#ifdef CONFIG_PM + .suspend = ar9170_suspend, + .resume = ar9170_resume, +#endif /* CONFIG_PM */ }; static int __init ar9170_init(void) -- cgit v0.10.2 From d91c01c757bd9659ac10549504586fae610265a4 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sat, 18 Apr 2009 21:53:15 +0300 Subject: nl80211: Make nl80211_send_mlme_event() atomic One of the code paths sending deauth/disassoc events ends up calling this function with rcu_read_lock held, so we must use GFP_ATOMIC in allocation routines. Reported-by: Johannes Berg Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 353e1a4..2456e4e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3334,7 +3334,7 @@ static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev, struct sk_buff *msg; void *hdr; - msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); + msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC); if (!msg) return; @@ -3353,7 +3353,7 @@ static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev, return; } - genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_KERNEL); + genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC); return; nla_put_failure: -- cgit v0.10.2 From ad935687dbe7307f5abd9e3f610a965a287324a9 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 19 Apr 2009 08:47:19 +0300 Subject: mac80211: fix beacon loss detection after scan Currently beacon loss detection triggers after a scan. A probe request is sent and a message like this is printed to the log: wlan0: beacon loss from AP 00:12:17:e7:98:de - sending probe request But in fact there is no beacon loss, the beacons are just not received because of the ongoing scan. Fix it by updating last_beacon after the scan has finished. Reported-by: Jaswinder Singh Rajput Signed-off-by: Kalle Valo Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1619e0c..ccfc21a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1913,9 +1913,17 @@ static void ieee80211_sta_work(struct work_struct *work) static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) { - if (sdata->vif.type == NL80211_IFTYPE_STATION) + if (sdata->vif.type == NL80211_IFTYPE_STATION) { + /* + * Need to update last_beacon to avoid beacon loss + * test to trigger. + */ + sdata->u.mgd.last_beacon = jiffies; + + queue_work(sdata->local->hw.workqueue, &sdata->u.mgd.work); + } } /* interface setup */ -- cgit v0.10.2 From 7e0986c17f695952ce5d61ed793ce048ba90a661 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 19 Apr 2009 13:22:11 +0200 Subject: mac80211: fix basic rate bitmap calculation "mac80211: fix basic rates setting from association response" introduced a copy/paste error. Unfortunately, this not just leads to wrong data being passed to the driver but is remotely exploitable for some hardware or driver combinations. Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.29] Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ccfc21a..132938b 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1366,7 +1366,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, for (i = 0; i < elems.ext_supp_rates_len; i++) { int rate = (elems.ext_supp_rates[i] & 0x7f) * 5; - bool is_basic = !!(elems.supp_rates[i] & 0x80); + bool is_basic = !!(elems.ext_supp_rates[i] & 0x80); if (rate > 110) have_higher_than_11mbit = true; -- cgit v0.10.2 From 96ac7e88922da6ab33efea87c6b560ba5ab11e75 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 20 Apr 2009 13:53:15 -0700 Subject: RDMA/cxgb3: Adjust ORD/IRD (if needed) for peer2peer connections NFS/RDMA currently fails to set up connections if peer2peer is on. This is due to the fact that the NFS/RDMA client sets its ORD to 0. If peer2peer is set, make sure the active side ORD is >= 1 and the passive side IRD is >=1. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index fef3f1a..52d7bb0 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1830,6 +1830,10 @@ int iwch_accept_cr(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) ep->com.rpl_err = 0; ep->ird = conn_param->ird; ep->ord = conn_param->ord; + + if (peer2peer && ep->ird == 0) + ep->ird = 1; + PDBG("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord); get_ep(&ep->com); @@ -1915,6 +1919,10 @@ int iwch_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) conn_param->private_data, ep->plen); ep->ird = conn_param->ird; ep->ord = conn_param->ord; + + if (peer2peer && ep->ord == 0) + ep->ord = 1; + ep->com.tdev = h->rdev.t3cdev_p; cm_id->add_ref(cm_id); -- cgit v0.10.2 From e028cc55cc5c90a1c57eefe560a0cbb4df1fed14 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Mon, 20 Apr 2009 13:58:08 -0700 Subject: IPoIB: Disable NAPI while CQ is being drained If NAPI is enabled while IPoIB's CQ is being drained, it creates a race on priv->ibwc between ipoib_poll() and ipoib_drain_cq(), leading to memory corruption. The solution is to enable/disable NAPI in ipoib_ib_dev_{open/stop}() instead of in ipoib_{open/stop}(), and sync NAPI on the INITIALIZED flag instead on the ADMIN_UP flag. This way NAPI will be disabled when ipoib_drain_cq() is called. This fixes . Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index da60827..e7e5adf 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -685,7 +685,8 @@ int ipoib_ib_dev_open(struct net_device *dev) queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task, round_jiffies_relative(HZ)); - set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags); + if (!test_and_set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) + napi_enable(&priv->napi); return 0; } @@ -804,7 +805,8 @@ int ipoib_ib_dev_stop(struct net_device *dev, int flush) struct ipoib_tx_buf *tx_req; int i; - clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags); + if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) + napi_disable(&priv->napi); ipoib_cm_dev_stop(dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 421a664..ab2c192 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -106,8 +106,7 @@ int ipoib_open(struct net_device *dev) ipoib_dbg(priv, "bringing up interface\n"); - if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) - napi_enable(&priv->napi); + set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); if (ipoib_pkey_dev_delay_open(dev)) return 0; @@ -143,7 +142,6 @@ err_stop: ipoib_ib_dev_stop(dev, 1); err_disable: - napi_disable(&priv->napi); clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); return -EINVAL; @@ -156,7 +154,6 @@ static int ipoib_stop(struct net_device *dev) ipoib_dbg(priv, "stopping interface\n"); clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); - napi_disable(&priv->napi); netif_stop_queue(dev); -- cgit v0.10.2 From 06c38d5e36b12d040839ff224e805146c0368556 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 9 Apr 2009 15:24:34 -0700 Subject: x86-64: fix FPU corruption with signals and preemption In 64bit signal delivery path, clear_used_math() was happening before saving the current active FPU state on to the user stack for signal handling. Between clear_used_math() and the state store on to the user stack, potentially we can get a page fault for the user address and can block. Infact, while testing we were hitting the might_fault() in __clear_user() which can do a schedule(). At a later point in time, we will schedule back into this process and resume the save state (using "xsave/fxsave" instruction) which can lead to DNA fault. And as used_math was cleared before, we will reinit the FP state in the DNA fault and continue. This reinit will result in loosing the FPU state of the process. Move clear_used_math() to a point after the FPU state has been stored onto the user stack. This issue is present from a long time (even before the xsave changes and the x86 merge). But it can easily be exposed in 2.6.28.x and 2.6.29.x series because of the __clear_user() in this path, which has an explicit __cond_resched() leading to a context switch with CONFIG_PREEMPT_VOLUNTARY. [ Impact: fix FPU state corruption ] Signed-off-by: Suresh Siddha Cc: [2.6.28.x, 2.6.29.x] Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 0a5b04a..c5ee17e 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -89,7 +89,7 @@ int save_i387_xstate(void __user *buf) if (!used_math()) return 0; - clear_used_math(); /* trigger finit */ + if (task_thread_info(tsk)->status & TS_USEDFPU) { /* * Start with clearing the user buffer. This will present a @@ -114,6 +114,8 @@ int save_i387_xstate(void __user *buf) return -1; } + clear_used_math(); /* trigger finit */ + if (task_thread_info(tsk)->status & TS_XSAVE) { struct _fpstate __user *fx = buf; struct _xstate __user *x = buf; -- cgit v0.10.2 From 1af9222b5223a7b04102dc8c403fa55fa15d5184 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 20 Apr 2009 14:50:36 -0700 Subject: RDMA/nes: Fix compiler warning at nes_verbs.c:1955 Initialize pbl_count_256 to 0 to get rid of the warning: drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_reg_mr': drivers/infiniband/hw/nes/nes_verbs.c:1955: warning: 'pbl_count_256' may be used uninitialized in this function Reported-by: Roland Dreier Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 7e5b5ba..9279d05 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1952,7 +1952,7 @@ static int nes_reg_mr(struct nes_device *nesdev, struct nes_pd *nespd, int ret; struct nes_adapter *nesadapter = nesdev->nesadapter; uint pg_cnt = 0; - u16 pbl_count_256; + u16 pbl_count_256 = 0; u16 pbl_count = 0; u8 use_256_pbls = 0; u8 use_4k_pbls = 0; -- cgit v0.10.2 From 62cedd11f63c99efd2962fb69763a09e2778f6e6 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 20 Apr 2009 14:52:29 -0700 Subject: tg3: Fix SEEPROM accesses The recent NVRAM patches sanitized how the driver deals with NVRAM data, but they failed to bring the SEEPROM interfaces inline with the new strategy. This patch brings the SEEPROM interfaces up to date. This patch also reverts commit 0d489ffb76de0fe804cf06a9d4d11fa7342d74b9 ("tg3: fix big endian MAC address collection failure"). Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Tested-by: Robin Holt Tested-by: James Bottomley Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 7a837c4..201be42 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -2190,7 +2190,14 @@ static int tg3_nvram_read_using_eeprom(struct tg3 *tp, if (!(tmp & EEPROM_ADDR_COMPLETE)) return -EBUSY; - *val = tr32(GRC_EEPROM_DATA); + tmp = tr32(GRC_EEPROM_DATA); + + /* + * The data will always be opposite the native endian + * format. Perform a blind byteswap to compensate. + */ + *val = swab32(tmp); + return 0; } @@ -10663,7 +10670,13 @@ static int tg3_nvram_write_block_using_eeprom(struct tg3 *tp, memcpy(&data, buf + i, 4); - tw32(GRC_EEPROM_DATA, be32_to_cpu(data)); + /* + * The SEEPROM interface expects the data to always be opposite + * the native endian format. We accomplish this by reversing + * all the operations that would have been performed on the + * data from a call to tg3_nvram_read_be32(). + */ + tw32(GRC_EEPROM_DATA, swab32(be32_to_cpu(data))); val = tr32(GRC_EEPROM_ADDR); tw32(GRC_EEPROM_ADDR, val | EEPROM_ADDR_COMPLETE); @@ -12443,13 +12456,8 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) /* Next, try NVRAM. */ if (!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) && !tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) { - dev->dev_addr[0] = ((hi >> 16) & 0xff); - dev->dev_addr[1] = ((hi >> 24) & 0xff); - dev->dev_addr[2] = ((lo >> 0) & 0xff); - dev->dev_addr[3] = ((lo >> 8) & 0xff); - dev->dev_addr[4] = ((lo >> 16) & 0xff); - dev->dev_addr[5] = ((lo >> 24) & 0xff); - + memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2); + memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo)); } /* Finally just fetch it out of the MAC control regs. */ else { -- cgit v0.10.2 From 3f32eb1185170524a81dadff2e67521585943a53 Mon Sep 17 00:00:00 2001 From: Don Wood Date: Mon, 20 Apr 2009 14:53:00 -0700 Subject: RDMA/nes: Fix bugs in nes_reg_phys_mr() The code incorrectly failed memory registration if the buffer was not page aligned. Also, the length field is mangled causing the hardware to think the registration is much larger than it really is. The fix is to remove the page alignment restriction as well the incorrect length adjustment. Also make sure that all buffers after the first start at a page boundary, and all buffers except the last end on a page boundary. Signed-off-by: Don Wood Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 9279d05..f04bb1a 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -2122,6 +2122,7 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd, struct nes_root_vpbl root_vpbl; u32 stag; u32 i; + unsigned long mask; u32 stag_index = 0; u32 next_stag_index = 0; u32 driver_key = 0; @@ -2150,6 +2151,9 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd, return ERR_PTR(-E2BIG); } + if ((buffer_list[0].addr ^ *iova_start) & ~PAGE_MASK) + return ERR_PTR(-EINVAL); + err = nes_alloc_resource(nesadapter, nesadapter->allocated_mrs, nesadapter->max_mr, &stag_index, &next_stag_index); if (err) { @@ -2215,19 +2219,16 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd, root_pbl_index++; cur_pbl_index = 0; } - if (buffer_list[i].addr & ~PAGE_MASK) { - /* TODO: Unwind allocated buffers */ - nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index); - nes_debug(NES_DBG_MR, "Unaligned Memory Buffer: 0x%x\n", - (unsigned int) buffer_list[i].addr); - ibmr = ERR_PTR(-EINVAL); - kfree(nesmr); - goto reg_phys_err; - } - if (!buffer_list[i].size) { + mask = !buffer_list[i].size; + if (i != 0) + mask |= buffer_list[i].addr; + if (i != num_phys_buf - 1) + mask |= buffer_list[i].addr + buffer_list[i].size; + + if (mask & ~PAGE_MASK) { nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index); - nes_debug(NES_DBG_MR, "Invalid Buffer Size\n"); + nes_debug(NES_DBG_MR, "Invalid buffer addr or size\n"); ibmr = ERR_PTR(-EINVAL); kfree(nesmr); goto reg_phys_err; @@ -2238,7 +2239,7 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd, if ((buffer_list[i-1].addr+PAGE_SIZE) != buffer_list[i].addr) single_page = 0; } - vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr); + vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr & PAGE_MASK); vpbl.pbl_vbase[cur_pbl_index++].pa_high = cpu_to_le32((u32)((((u64)buffer_list[i].addr) >> 32))); } @@ -2251,8 +2252,6 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd, " length = 0x%016lX, index = 0x%08X\n", stag, (unsigned long)*iova_start, (unsigned long)region_length, stag_index); - region_length -= (*iova_start)&PAGE_MASK; - /* Make the leaf PBL the root if only one PBL */ if (root_pbl_index == 1) { root_vpbl.pbl_pbase = vpbl.pbl_pbase; -- cgit v0.10.2 From 8c31813f31cd4403b46802866949a95a6e8fa584 Mon Sep 17 00:00:00 2001 From: Toshinobu Sugioka Date: Tue, 21 Apr 2009 07:34:53 +0900 Subject: sh: Fix mmap2 for handling differing PAGE_SIZEs. mmap2 uses a fixed page shift of 12, regardless of the PAGE_SIZE setting. Fix up the mmap2 code to add some sanity checks on the mapping, and to update pgoff accordingly. Error handling bits based on 4280e3126f641898f0ed1a931645373d3489e2a6 ("frv: fix mmap2 error handling"). Signed-off-by: Toshinobu Sugioka Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 58dfc02..e3a7e36 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -63,6 +63,15 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { + /* + * The shift for mmap2 is constant, regardless of PAGE_SIZE + * setting. + */ + if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1)) + return -EINVAL; + + pgoff >>= PAGE_SHIFT - 12; + return do_mmap2(addr, len, prot, flags, fd, pgoff); } -- cgit v0.10.2 From cde9e2f9307dd6af6bf8c5f02e41a6e27da9682a Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 20 Apr 2009 17:00:53 -0700 Subject: RDMA/cxgb3: Don't zero QP attrs when moving to IDLE QP attributes must stay initialized when moving back to IDLE. Zeroing them will crash the system in _flush_qp() if the QP is subsequently moved to ERROR and back to IDLE. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 2f546a6..27bbdc8 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -1069,7 +1069,6 @@ int iwch_modify_qp(struct iwch_dev *rhp, struct iwch_qp *qhp, goto out; } qhp->attr.state = IWCH_QP_STATE_IDLE; - memset(&qhp->attr, 0, sizeof(qhp->attr)); break; case IWCH_QP_STATE_TERMINATE: if (!internal) { -- cgit v0.10.2 From cf2706a340ae98616d4e2a54900393e0e0b6b72c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 7 Apr 2009 09:03:30 -0400 Subject: Fix AUTOFS_DEV_IOCTL_REQUESTER_CMD Missing conversion from kernel to userland dev_t; this sucker breaks as soon as we get sufficiently many autofs mounts for new_encode_dev(s_dev) != s_dev. Note: this is the minimal fix. Signed-off-by: Al Viro diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 9e5ae8a..463f798 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -488,7 +488,7 @@ static int autofs_dev_ioctl_requester(struct file *fp, } path = param->path; - devid = sbi->sb->s_dev; + devid = new_encode_dev(sbi->sb->s_dev); param->requester.uid = param->requester.gid = -1; -- cgit v0.10.2 From e5d67f0715bc60f6c19abdd86d007d7bb29c9951 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 7 Apr 2009 12:15:39 -0400 Subject: Touch all affected namespaces on propagation of mount We shouldn't just touch the namespace of current process Caught-by: Trond Myklebust Signed-off-by: Al Viro diff --git a/fs/namespace.c b/fs/namespace.c index d9138f8..4119620 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1377,7 +1377,7 @@ static int attach_recursive_mnt(struct vfsmount *source_mnt, if (parent_path) { detach_mnt(source_mnt, parent_path); attach_mnt(source_mnt, path); - touch_mnt_namespace(current->nsproxy->mnt_ns); + touch_mnt_namespace(parent_path->mnt->mnt_ns); } else { mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt); commit_tree(source_mnt); -- cgit v0.10.2 From 1644ccc8a99ae73859c39372f96afdbf03c9f80d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Apr 2009 02:32:31 -0400 Subject: Safer nfsd_cross_mnt() AFAICS, we have a subtle bug there: if we have crossed mountpoint *and* it got mount --move'd away, we'll be holding only one reference to fs containing dentry - exp->ex_path.mnt. IOW, we ought to dput() before exp_put(). Signed-off-by: Al Viro diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index ab93fcf..46e6bd2 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -116,10 +116,15 @@ nfsd_cross_mnt(struct svc_rqst *rqstp, struct dentry **dpp, } if ((exp->ex_flags & NFSEXP_CROSSMOUNT) || EX_NOHIDE(exp2)) { /* successfully crossed mount point */ - exp_put(exp); - *expp = exp2; + /* + * This is subtle: dentry is *not* under mnt at this point. + * The only reason we are safe is that original mnt is pinned + * down by exp, so we should dput before putting exp. + */ dput(dentry); *dpp = mounts; + exp_put(exp); + *expp = exp2; } else { exp_put(exp2); dput(mounts); -- cgit v0.10.2 From 24b6f16ecf37f918a1934d590e9e71c100d6388f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Apr 2009 03:25:41 -0400 Subject: No need for crossing to mountpoint in audit_tag_tree() is_under() will DTRT anyway. And yes, is_subdir() behaviour is intentional. Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index 761d30b..1fcffeb 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -2149,7 +2149,6 @@ int is_subdir(struct dentry *new_dentry, struct dentry *old_dentry) int result; unsigned long seq; - /* FIXME: This is old behavior, needed? Please check callers. */ if (new_dentry == old_dentry) return 1; diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 917ab95..6e73517 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -734,9 +734,6 @@ int audit_tag_tree(char *old, char *new) dentry = dget(path.dentry); path_put(&path); - if (dentry == tagged->mnt_root && dentry == mnt->mnt_root) - follow_up(&mnt, &dentry); - list_add_tail(&list, &tagged->mnt_list); mutex_lock(&audit_filter_mutex); -- cgit v0.10.2 From 117aff744a20a2a04ccdb36cd5978316e1af0c3a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Apr 2009 11:19:26 -0400 Subject: Fix autofs_expire() mnt should remain the same for all iterations through the list; as it is, if we have a busy mount, mnt follows into it and isn't restored for the next iteration. Signed-off-by: Al Viro diff --git a/fs/autofs/dirhash.c b/fs/autofs/dirhash.c index bf8c8af..4eb4d8d 100644 --- a/fs/autofs/dirhash.c +++ b/fs/autofs/dirhash.c @@ -39,10 +39,12 @@ struct autofs_dir_ent *autofs_expire(struct super_block *sb, { struct autofs_dirhash *dh = &sbi->dirhash; struct autofs_dir_ent *ent; - struct dentry *dentry; unsigned long timeout = sbi->exp_timeout; while (1) { + struct path path; + int umount_ok; + if ( list_empty(&dh->expiry_head) || sbi->catatonic ) return NULL; /* No entries */ /* We keep the list sorted by last_usage and want old stuff */ @@ -57,17 +59,17 @@ struct autofs_dir_ent *autofs_expire(struct super_block *sb, return ent; /* Symlinks are always expirable */ /* Get the dentry for the autofs subdirectory */ - dentry = ent->dentry; + path.dentry = ent->dentry; - if ( !dentry ) { + if (!path.dentry) { /* Should only happen in catatonic mode */ printk("autofs: dentry == NULL but inode range is directory, entry %s\n", ent->name); autofs_delete_usage(ent); continue; } - if ( !dentry->d_inode ) { - dput(dentry); + if (!path.dentry->d_inode) { + dput(path.dentry); printk("autofs: negative dentry on expiry queue: %s\n", ent->name); autofs_delete_usage(ent); @@ -76,29 +78,29 @@ struct autofs_dir_ent *autofs_expire(struct super_block *sb, /* Make sure entry is mounted and unused; note that dentry will point to the mounted-on-top root. */ - if (!S_ISDIR(dentry->d_inode->i_mode)||!d_mountpoint(dentry)) { + if (!S_ISDIR(path.dentry->d_inode->i_mode) || + !d_mountpoint(path.dentry)) { DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name)); continue; } - mntget(mnt); - dget(dentry); - if (!follow_down(&mnt, &dentry)) { - dput(dentry); - mntput(mnt); + path.mnt = mnt; + path_get(&path); + if (!follow_down(&path.mnt, &path.dentry)) { + path_put(&path); DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name)); continue; } - while (d_mountpoint(dentry) && follow_down(&mnt, &dentry)) + while (d_mountpoint(path.dentry) && + follow_down(&path.mnt, &path.dentry)) ; - dput(dentry); + umount_ok = may_umount(path.mnt); + path_put(&path); - if ( may_umount(mnt) ) { - mntput(mnt); + if (umount_ok) { DPRINTK(("autofs: signaling expire on %s\n", ent->name)); return ent; /* Expirable! */ } DPRINTK(("autofs: didn't expire due to may_umount: %s\n", ent->name)); - mntput(mnt); } return NULL; /* No expirable entries */ } -- cgit v0.10.2 From 1ba0c7dbbbc24230394100c5f0d0df38cb400cff Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Mon, 20 Apr 2009 12:23:02 +0400 Subject: fs/compat_ioctl: fix build when !BLOCK In file included from fs/compat_ioctl.c:61: include/linux/loop.h:59: error: field 'lo_bio_list' has incomplete type Signed-off-by: Alexander Beregalov Signed-off-by: Al Viro diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 3e87ce4..b83f6bc 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -58,7 +58,6 @@ #include #include #include -#include #include #include @@ -68,6 +67,7 @@ #include #ifdef CONFIG_BLOCK +#include #include #include #include @@ -2660,6 +2660,8 @@ HANDLE_IOCTL(SONET_GETFRAMING, do_atm_ioctl) HANDLE_IOCTL(SONET_GETFRSENSE, do_atm_ioctl) /* block stuff */ #ifdef CONFIG_BLOCK +/* loop */ +IGNORE_IOCTL(LOOP_CLR_FD) /* Raw devices */ HANDLE_IOCTL(RAW_SETBIND, raw_ioctl) HANDLE_IOCTL(RAW_GETBIND, raw_ioctl) @@ -2728,9 +2730,6 @@ HANDLE_IOCTL(LPSETTIMEOUT, lp_timeout_trans) IGNORE_IOCTL(VFAT_IOCTL_READDIR_BOTH32) IGNORE_IOCTL(VFAT_IOCTL_READDIR_SHORT32) -/* loop */ -IGNORE_IOCTL(LOOP_CLR_FD) - #ifdef CONFIG_SPARC /* Sparc framebuffers, handled in sbusfb_compat_ioctl() */ IGNORE_IOCTL(FBIOGTYPE) -- cgit v0.10.2 From 2f9092e1020246168b1309b35e085ecd7ff9ff72 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 20 Apr 2009 23:18:37 +0100 Subject: Fix i_mutex vs. readdir handling in nfsd Commit 14f7dd63 ("Copy XFS readdir hack into nfsd code") introduced a bug to generic code which had been extant for a long time in the XFS version -- it started to call through into lookup_one_len() and hence into the file systems' ->lookup() methods without i_mutex held on the directory. This patch fixes it by locking the directory's i_mutex again before calling the filldir functions. The original deadlocks which commit 14f7dd63 was designed to avoid are still avoided, because they were due to fs-internal locking, not i_mutex. While we're at it, fix the return type of nfsd_buffered_readdir() which should be a __be32 not an int -- it's an NFS errno, not a Linux errno. And return nfserrno(-ENOMEM) when allocation fails, not just -ENOMEM. Sparse would have caught that, if it wasn't so busy bitching about __cold__. Commit 05f4f678 ("nfsd4: don't do lookup within readdir in recovery code") introduced a similar problem with calling lookup_one_len() without i_mutex, which this patch also addresses. To fix that, it was necessary to fix the called functions so that they expect i_mutex to be held; that part was done by J. Bruce Fields. Signed-off-by: David Woodhouse Umm-I-can-live-with-that-by: Al Viro Reported-by: J. R. Okajima Tested-by: J. Bruce Fields LKML-Reference: <8036.1237474444@jrobl> Cc: stable@kernel.org Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index b8433eb..78f253c 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1248,6 +1248,8 @@ struct dentry *lookup_one_len(const char *name, struct dentry *base, int len) int err; struct qstr this; + WARN_ON_ONCE(!mutex_is_locked(&base->d_inode->i_mutex)); + err = __lookup_one_len(name, &this, base, len); if (err) return ERR_PTR(err); diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c index 3444c00..5275097 100644 --- a/fs/nfsd/nfs4recover.c +++ b/fs/nfsd/nfs4recover.c @@ -229,21 +229,23 @@ nfsd4_list_rec_dir(struct dentry *dir, recdir_func *f) goto out; status = vfs_readdir(filp, nfsd4_build_namelist, &names); fput(filp); + mutex_lock(&dir->d_inode->i_mutex); while (!list_empty(&names)) { entry = list_entry(names.next, struct name_list, list); dentry = lookup_one_len(entry->name, dir, HEXDIR_LEN-1); if (IS_ERR(dentry)) { status = PTR_ERR(dentry); - goto out; + break; } status = f(dir, dentry); dput(dentry); if (status) - goto out; + break; list_del(&entry->list); kfree(entry); } + mutex_unlock(&dir->d_inode->i_mutex); out: while (!list_empty(&names)) { entry = list_entry(names.next, struct name_list, list); @@ -255,36 +257,6 @@ out: } static int -nfsd4_remove_clid_file(struct dentry *dir, struct dentry *dentry) -{ - int status; - - if (!S_ISREG(dir->d_inode->i_mode)) { - printk("nfsd4: non-file found in client recovery directory\n"); - return -EINVAL; - } - mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT); - status = vfs_unlink(dir->d_inode, dentry); - mutex_unlock(&dir->d_inode->i_mutex); - return status; -} - -static int -nfsd4_clear_clid_dir(struct dentry *dir, struct dentry *dentry) -{ - int status; - - /* For now this directory should already be empty, but we empty it of - * any regular files anyway, just in case the directory was created by - * a kernel from the future.... */ - nfsd4_list_rec_dir(dentry, nfsd4_remove_clid_file); - mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT); - status = vfs_rmdir(dir->d_inode, dentry); - mutex_unlock(&dir->d_inode->i_mutex); - return status; -} - -static int nfsd4_unlink_clid_dir(char *name, int namlen) { struct dentry *dentry; @@ -294,18 +266,18 @@ nfsd4_unlink_clid_dir(char *name, int namlen) mutex_lock(&rec_dir.dentry->d_inode->i_mutex); dentry = lookup_one_len(name, rec_dir.dentry, namlen); - mutex_unlock(&rec_dir.dentry->d_inode->i_mutex); if (IS_ERR(dentry)) { status = PTR_ERR(dentry); - return status; + goto out_unlock; } status = -ENOENT; if (!dentry->d_inode) goto out; - - status = nfsd4_clear_clid_dir(rec_dir.dentry, dentry); + status = vfs_rmdir(rec_dir.dentry->d_inode, dentry); out: dput(dentry); +out_unlock: + mutex_unlock(&rec_dir.dentry->d_inode->i_mutex); return status; } @@ -348,7 +320,7 @@ purge_old(struct dentry *parent, struct dentry *child) if (nfs4_has_reclaimed_state(child->d_name.name, false)) return 0; - status = nfsd4_clear_clid_dir(parent, child); + status = vfs_rmdir(parent->d_inode, child); if (status) printk("failed to remove client recovery directory %s\n", child->d_name.name); diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 46e6bd2..6c68ffd 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1890,8 +1890,8 @@ static int nfsd_buffered_filldir(void *__buf, const char *name, int namlen, return 0; } -static int nfsd_buffered_readdir(struct file *file, filldir_t func, - struct readdir_cd *cdp, loff_t *offsetp) +static __be32 nfsd_buffered_readdir(struct file *file, filldir_t func, + struct readdir_cd *cdp, loff_t *offsetp) { struct readdir_data buf; struct buffered_dirent *de; @@ -1901,11 +1901,12 @@ static int nfsd_buffered_readdir(struct file *file, filldir_t func, buf.dirent = (void *)__get_free_page(GFP_KERNEL); if (!buf.dirent) - return -ENOMEM; + return nfserrno(-ENOMEM); offset = *offsetp; while (1) { + struct inode *dir_inode = file->f_path.dentry->d_inode; unsigned int reclen; cdp->err = nfserr_eof; /* will be cleared on successful read */ @@ -1924,26 +1925,38 @@ static int nfsd_buffered_readdir(struct file *file, filldir_t func, if (!size) break; + /* + * Various filldir functions may end up calling back into + * lookup_one_len() and the file system's ->lookup() method. + * These expect i_mutex to be held, as it would within readdir. + */ + host_err = mutex_lock_killable(&dir_inode->i_mutex); + if (host_err) + break; + de = (struct buffered_dirent *)buf.dirent; while (size > 0) { offset = de->offset; if (func(cdp, de->name, de->namlen, de->offset, de->ino, de->d_type)) - goto done; + break; if (cdp->err != nfs_ok) - goto done; + break; reclen = ALIGN(sizeof(*de) + de->namlen, sizeof(u64)); size -= reclen; de = (struct buffered_dirent *)((char *)de + reclen); } + mutex_unlock(&dir_inode->i_mutex); + if (size > 0) /* We bailed out early */ + break; + offset = vfs_llseek(file, 0, SEEK_CUR); } - done: free_page((unsigned long)(buf.dirent)); if (host_err) -- cgit v0.10.2 From 66672fefaa91802fec51c3fe0cc55bc9baea5a2d Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Mon, 20 Apr 2009 18:38:28 -0700 Subject: Documentation/filesystems: remove out of date reference to BKL being held Documentation/filesystems/vfs.txt incorrectly states that the kernel is locked during the call to statfs (Documentation/filesystems/Locking correctly says it is not). This patch removes the offending sentence. remove reference to BKL being held in statfs Signed-off-by: Adrian McMenamin Signed-off-by: Randy Dunlap Cc: Alexander Viro Signed-off-by: Al Viro diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index deeeed0..f49eecf 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -277,8 +277,7 @@ or bottom half). unfreeze_fs: called when VFS is unlocking a filesystem and making it writable again. - statfs: called when the VFS needs to get filesystem statistics. This - is called with the kernel lock held + statfs: called when the VFS needs to get filesystem statistics. remount_fs: called when the filesystem is remounted. This is called with the kernel lock held -- cgit v0.10.2 From 3eac8778a237d83a1e553eba0c6f4fd4b39eeec0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 7 Apr 2009 11:12:46 -0400 Subject: autofs4: use memchr() in invalid_string() Signed-off-by: Al Viro diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 463f798..84168c0 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -54,11 +54,10 @@ static int check_name(const char *name) * Check a string doesn't overrun the chunk of * memory we copied from user land. */ -static int invalid_str(char *str, void *end) +static int invalid_str(char *str, size_t size) { - while ((void *) str <= end) - if (!*str++) - return 0; + if (memchr(str, 0, size)) + return 0; return -EINVAL; } @@ -138,8 +137,7 @@ static int validate_dev_ioctl(int cmd, struct autofs_dev_ioctl *param) } if (param->size > sizeof(*param)) { - err = invalid_str(param->path, - (void *) ((size_t) param + param->size)); + err = invalid_str(param->path, param->size - sizeof(*param)); if (err) { AUTOFS_WARN( "path string terminator missing for cmd(0x%08x)", -- cgit v0.10.2 From 3939fcde24473dc09ce16e922c88df9b3bee45d9 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 8 Apr 2009 15:06:12 +0800 Subject: xattr: use memdup_user() Remove open-coded memdup_user() Signed-off-by: Li Zefan Signed-off-by: Al Viro diff --git a/fs/xattr.c b/fs/xattr.c index 197c4fc..d51b8f9 100644 --- a/fs/xattr.c +++ b/fs/xattr.c @@ -237,13 +237,9 @@ setxattr(struct dentry *d, const char __user *name, const void __user *value, if (size) { if (size > XATTR_SIZE_MAX) return -E2BIG; - kvalue = kmalloc(size, GFP_KERNEL); - if (!kvalue) - return -ENOMEM; - if (copy_from_user(kvalue, value, size)) { - kfree(kvalue); - return -EFAULT; - } + kvalue = memdup_user(value, size); + if (IS_ERR(kvalue)) + return PTR_ERR(kvalue); } error = vfs_setxattr(d, kname, kvalue, size, flags); -- cgit v0.10.2 From dae7b665cf6d6e6e733f1c9c16cf55547dd37e33 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 8 Apr 2009 15:06:54 +0800 Subject: btrfs: use memdup_user() Remove open-coded memdup_user(). Note this changes some GFP_NOFS to GFP_KERNEL, since copy_from_user() may cause pagefault, it's pointless to pass GFP_NOFS to kmalloc(). Signed-off-by: Li Zefan Signed-off-by: Al Viro diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 7594bec..9f135e8 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -461,15 +461,9 @@ static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg) if (!capable(CAP_SYS_ADMIN)) return -EPERM; - vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS); - - if (!vol_args) - return -ENOMEM; - - if (copy_from_user(vol_args, arg, sizeof(*vol_args))) { - ret = -EFAULT; - goto out; - } + vol_args = memdup_user(arg, sizeof(*vol_args)); + if (IS_ERR(vol_args)) + return PTR_ERR(vol_args); vol_args->name[BTRFS_PATH_NAME_MAX] = '\0'; namelen = strlen(vol_args->name); @@ -545,7 +539,6 @@ static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg) out_unlock: mutex_unlock(&root->fs_info->volume_mutex); -out: kfree(vol_args); return ret; } @@ -565,15 +558,9 @@ static noinline int btrfs_ioctl_snap_create(struct file *file, if (root->fs_info->sb->s_flags & MS_RDONLY) return -EROFS; - vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS); - - if (!vol_args) - return -ENOMEM; - - if (copy_from_user(vol_args, arg, sizeof(*vol_args))) { - ret = -EFAULT; - goto out; - } + vol_args = memdup_user(arg, sizeof(*vol_args)); + if (IS_ERR(vol_args)) + return PTR_ERR(vol_args); vol_args->name[BTRFS_PATH_NAME_MAX] = '\0'; namelen = strlen(vol_args->name); @@ -675,19 +662,13 @@ static long btrfs_ioctl_add_dev(struct btrfs_root *root, void __user *arg) if (!capable(CAP_SYS_ADMIN)) return -EPERM; - vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS); + vol_args = memdup_user(arg, sizeof(*vol_args)); + if (IS_ERR(vol_args)) + return PTR_ERR(vol_args); - if (!vol_args) - return -ENOMEM; - - if (copy_from_user(vol_args, arg, sizeof(*vol_args))) { - ret = -EFAULT; - goto out; - } vol_args->name[BTRFS_PATH_NAME_MAX] = '\0'; ret = btrfs_init_new_device(root, vol_args->name); -out: kfree(vol_args); return ret; } @@ -703,19 +684,13 @@ static long btrfs_ioctl_rm_dev(struct btrfs_root *root, void __user *arg) if (root->fs_info->sb->s_flags & MS_RDONLY) return -EROFS; - vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS); + vol_args = memdup_user(arg, sizeof(*vol_args)); + if (IS_ERR(vol_args)) + return PTR_ERR(vol_args); - if (!vol_args) - return -ENOMEM; - - if (copy_from_user(vol_args, arg, sizeof(*vol_args))) { - ret = -EFAULT; - goto out; - } vol_args->name[BTRFS_PATH_NAME_MAX] = '\0'; ret = btrfs_rm_device(root, vol_args->name); -out: kfree(vol_args); return ret; } diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 9744af9..a7acfe6 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -635,14 +635,9 @@ static long btrfs_control_ioctl(struct file *file, unsigned int cmd, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - vol = kmalloc(sizeof(*vol), GFP_KERNEL); - if (!vol) - return -ENOMEM; - - if (copy_from_user(vol, (void __user *)arg, sizeof(*vol))) { - ret = -EFAULT; - goto out; - } + vol = memdup_user((void __user *)arg, sizeof(*vol)); + if (IS_ERR(vol)) + return PTR_ERR(vol); switch (cmd) { case BTRFS_IOC_SCAN_DEV: @@ -650,7 +645,7 @@ static long btrfs_control_ioctl(struct file *file, unsigned int cmd, &btrfs_fs_type, &fs_devices); break; } -out: + kfree(vol); return ret; } -- cgit v0.10.2 From 1c8542c7bb239ef02fe21477acd9cdac04c1b640 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 8 Apr 2009 15:07:30 +0800 Subject: sysfs: use memdup_user() Remove open-coded memdup_user(). Signed-off-by: Li Zefan Signed-off-by: Al Viro diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c index 93e0c02..9345806 100644 --- a/fs/sysfs/bin.c +++ b/fs/sysfs/bin.c @@ -157,14 +157,9 @@ static ssize_t write(struct file *file, const char __user *userbuf, count = size - offs; } - temp = kmalloc(count, GFP_KERNEL); - if (!temp) - return -ENOMEM; - - if (copy_from_user(temp, userbuf, count)) { - count = -EFAULT; - goto out_free; - } + temp = memdup_user(userbuf, count); + if (IS_ERR(temp)) + return PTR_ERR(temp); mutex_lock(&bb->mutex); @@ -176,8 +171,6 @@ static ssize_t write(struct file *file, const char __user *userbuf, if (count > 0) *off = offs + count; -out_free: - kfree(temp); return count; } -- cgit v0.10.2 From 0e639bdeef26faf287db77a15530f3f295a4ae04 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 8 Apr 2009 15:08:04 +0800 Subject: xfs: use memdup_user() Remove open-coded memdup_user() Signed-off-by: Li Zefan Signed-off-by: Al Viro diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index d0b4994..34eaab6 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -489,17 +489,12 @@ xfs_attrmulti_attr_set( if (len > XATTR_SIZE_MAX) return EINVAL; - kbuf = kmalloc(len, GFP_KERNEL); - if (!kbuf) - return ENOMEM; - - if (copy_from_user(kbuf, ubuf, len)) - goto out_kfree; + kbuf = memdup_user(ubuf, len); + if (IS_ERR(kbuf)) + return PTR_ERR(kbuf); error = xfs_attr_set(XFS_I(inode), name, kbuf, len, flags); - out_kfree: - kfree(kbuf); return error; } @@ -540,20 +535,16 @@ xfs_attrmulti_by_handle( if (!size || size > 16 * PAGE_SIZE) goto out_dput; - error = ENOMEM; - ops = kmalloc(size, GFP_KERNEL); - if (!ops) + ops = memdup_user(am_hreq.ops, size); + if (IS_ERR(ops)) { + error = PTR_ERR(ops); goto out_dput; - - error = EFAULT; - if (copy_from_user(ops, am_hreq.ops, size)) - goto out_kfree_ops; + } attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL); if (!attr_name) goto out_kfree_ops; - error = 0; for (i = 0; i < am_hreq.opcount; i++) { ops[i].am_error = strncpy_from_user(attr_name, diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c index c70c4e3..0882d16 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl32.c +++ b/fs/xfs/linux-2.6/xfs_ioctl32.c @@ -427,20 +427,16 @@ xfs_compat_attrmulti_by_handle( if (!size || size > 16 * PAGE_SIZE) goto out_dput; - error = ENOMEM; - ops = kmalloc(size, GFP_KERNEL); - if (!ops) + ops = memdup_user(compat_ptr(am_hreq.ops), size); + if (IS_ERR(ops)) { + error = PTR_ERR(ops); goto out_dput; - - error = EFAULT; - if (copy_from_user(ops, compat_ptr(am_hreq.ops), size)) - goto out_kfree_ops; + } attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL); if (!attr_name) goto out_kfree_ops; - error = 0; for (i = 0; i < am_hreq.opcount; i++) { ops[i].am_error = strncpy_from_user(attr_name, -- cgit v0.10.2 From a9482ebcdedbc5872ed34a266e6a45c35116f264 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 8 Apr 2009 15:08:53 +0800 Subject: ncpfs: use memdup_user() Remove open-coded memdup_user() Signed-off-by: Li Zefan Signed-off-by: Al Viro diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c index f54360f..fa038df 100644 --- a/fs/ncpfs/ioctl.c +++ b/fs/ncpfs/ioctl.c @@ -660,13 +660,10 @@ outrel: if (user.object_name_len > NCP_OBJECT_NAME_MAX_LEN) return -ENOMEM; if (user.object_name_len) { - newname = kmalloc(user.object_name_len, GFP_USER); - if (!newname) - return -ENOMEM; - if (copy_from_user(newname, user.object_name, user.object_name_len)) { - kfree(newname); - return -EFAULT; - } + newname = memdup_user(user.object_name, + user.object_name_len); + if (IS_ERR(newname)) + return PTR_ERR(newname); } else { newname = NULL; } @@ -760,13 +757,9 @@ outrel: if (user.len > NCP_PRIVATE_DATA_MAX_LEN) return -ENOMEM; if (user.len) { - new = kmalloc(user.len, GFP_USER); - if (!new) - return -ENOMEM; - if (copy_from_user(new, user.data, user.len)) { - kfree(new); - return -EFAULT; - } + new = memdup_user(user.data, user.len); + if (IS_ERR(new)) + return PTR_ERR(new); } else { new = NULL; } -- cgit v0.10.2 From fd56d242b3b80b6f2ca174272b20029aae61df75 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 8 Apr 2009 15:09:29 +0800 Subject: ecryptfs: use memdup_user() Remove open-coded memdup_user(). Signed-off-by: Li Zefan Signed-off-by: Al Viro diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c index a67fea6..dda3c58 100644 --- a/fs/ecryptfs/miscdev.c +++ b/fs/ecryptfs/miscdev.c @@ -418,18 +418,13 @@ ecryptfs_miscdev_write(struct file *file, const char __user *buf, if (count == 0) goto out; - data = kmalloc(count, GFP_KERNEL); - if (!data) { - printk(KERN_ERR "%s: Out of memory whilst attempting to " - "kmalloc([%zd], GFP_KERNEL)\n", __func__, count); + + data = memdup_user(buf, count); + if (IS_ERR(data)) { + printk(KERN_ERR "%s: memdup_user returned error [%ld]\n", + __func__, PTR_ERR(data)); goto out; } - rc = copy_from_user(data, buf, count); - if (rc) { - printk(KERN_ERR "%s: copy_from_user returned error [%d]\n", - __func__, rc); - goto out_free; - } sz = count; i = 0; switch (data[i++]) { -- cgit v0.10.2 From 0112fc2229847feb6c4eb011e6833d8f1742a375 Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Wed, 8 Apr 2009 20:05:42 +0400 Subject: Separate out common fstatat code into vfs_fstatat This is a version incorporating Christoph's suggestion. Separate out common *fstatat functionality into a single function instead of duplicating it all over the code. Signed-off-by: Oleg Drokin Signed-off-by: Al Viro diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index e04173c..d59a0cd 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -177,21 +177,12 @@ asmlinkage long sys_oabi_fstatat64(int dfd, int flag) { struct kstat stat; - int error = -EINVAL; + int error; - if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) - goto out; - - if (flag & AT_SYMLINK_NOFOLLOW) - error = vfs_lstat_fd(dfd, filename, &stat); - else - error = vfs_stat_fd(dfd, filename, &stat); - - if (!error) - error = cp_oldabi_stat64(&stat, statbuf); - -out: - return error; + error = vfs_fstatat(dfd, filename, &stat, flag); + if (error) + return error; + return cp_oldabi_stat64(&stat, statbuf); } struct oabi_flock64 { diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 6cc87d8..002c70d 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -702,20 +702,12 @@ asmlinkage long sys32_fstatat64(unsigned int dfd, char __user *filename, struct stat64_emu31 __user* statbuf, int flag) { struct kstat stat; - int error = -EINVAL; - - if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) - goto out; - - if (flag & AT_SYMLINK_NOFOLLOW) - error = vfs_lstat_fd(dfd, filename, &stat); - else - error = vfs_stat_fd(dfd, filename, &stat); + int error; - if (!error) - error = cp_stat64(statbuf, &stat); -out: - return error; + error = vfs_fstatat(dfd, filename, &stat, flag); + if (error) + return error; + return cp_stat64(statbuf, &stat); } /* diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c index e800503..f5000a4 100644 --- a/arch/sparc/kernel/sys_sparc32.c +++ b/arch/sparc/kernel/sys_sparc32.c @@ -206,21 +206,12 @@ asmlinkage long compat_sys_fstatat64(unsigned int dfd, char __user *filename, struct compat_stat64 __user * statbuf, int flag) { struct kstat stat; - int error = -EINVAL; - - if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) - goto out; - - if (flag & AT_SYMLINK_NOFOLLOW) - error = vfs_lstat_fd(dfd, filename, &stat); - else - error = vfs_stat_fd(dfd, filename, &stat); - - if (!error) - error = cp_compat_stat64(&stat, statbuf); + int error; -out: - return error; + error = vfs_fstatat(dfd, filename, &stat, flag); + if (error) + return error; + return cp_compat_stat64(&stat, statbuf); } asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2) diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c index efac92f..085a8c3 100644 --- a/arch/x86/ia32/sys_ia32.c +++ b/arch/x86/ia32/sys_ia32.c @@ -129,21 +129,12 @@ asmlinkage long sys32_fstatat(unsigned int dfd, char __user *filename, struct stat64 __user *statbuf, int flag) { struct kstat stat; - int error = -EINVAL; + int error; - if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) - goto out; - - if (flag & AT_SYMLINK_NOFOLLOW) - error = vfs_lstat_fd(dfd, filename, &stat); - else - error = vfs_stat_fd(dfd, filename, &stat); - - if (!error) - error = cp_stat64(statbuf, &stat); - -out: - return error; + error = vfs_fstatat(dfd, filename, &stat, flag); + if (error) + return error; + return cp_stat64(statbuf, &stat); } /* diff --git a/fs/compat.c b/fs/compat.c index 3f84d5f..dda72e2 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -204,21 +204,12 @@ asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user *filename, struct compat_stat __user *statbuf, int flag) { struct kstat stat; - int error = -EINVAL; - - if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) - goto out; - - if (flag & AT_SYMLINK_NOFOLLOW) - error = vfs_lstat_fd(dfd, filename, &stat); - else - error = vfs_stat_fd(dfd, filename, &stat); - - if (!error) - error = cp_compat_stat(&stat, statbuf); + int error; -out: - return error; + error = vfs_fstatat(dfd, filename, &stat, flag); + if (error) + return error; + return cp_compat_stat(&stat, statbuf); } #endif diff --git a/fs/stat.c b/fs/stat.c index 2db740a..5471166 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -109,6 +109,24 @@ int vfs_fstat(unsigned int fd, struct kstat *stat) EXPORT_SYMBOL(vfs_fstat); +int vfs_fstatat(int dfd, char __user *filename, struct kstat *stat, int flag) +{ + int error = -EINVAL; + + if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) + goto out; + + if (flag & AT_SYMLINK_NOFOLLOW) + error = vfs_lstat_fd(dfd, filename, stat); + else + error = vfs_stat_fd(dfd, filename, stat); +out: + return error; +} + +EXPORT_SYMBOL(vfs_fstatat); + + #ifdef __ARCH_WANT_OLD_STAT /* @@ -264,21 +282,12 @@ SYSCALL_DEFINE4(newfstatat, int, dfd, char __user *, filename, struct stat __user *, statbuf, int, flag) { struct kstat stat; - int error = -EINVAL; - - if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) - goto out; - - if (flag & AT_SYMLINK_NOFOLLOW) - error = vfs_lstat_fd(dfd, filename, &stat); - else - error = vfs_stat_fd(dfd, filename, &stat); - - if (!error) - error = cp_new_stat(&stat, statbuf); + int error; -out: - return error; + error = vfs_fstatat(dfd, filename, &stat, flag); + if (error) + return error; + return cp_new_stat(&stat, statbuf); } #endif @@ -404,21 +413,12 @@ SYSCALL_DEFINE4(fstatat64, int, dfd, char __user *, filename, struct stat64 __user *, statbuf, int, flag) { struct kstat stat; - int error = -EINVAL; - - if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) - goto out; - - if (flag & AT_SYMLINK_NOFOLLOW) - error = vfs_lstat_fd(dfd, filename, &stat); - else - error = vfs_stat_fd(dfd, filename, &stat); - - if (!error) - error = cp_new_stat64(&stat, statbuf); + int error; -out: - return error; + error = vfs_fstatat(dfd, filename, &stat, flag); + if (error) + return error; + return cp_new_stat64(&stat, statbuf); } #endif /* __ARCH_WANT_STAT64 */ diff --git a/include/linux/fs.h b/include/linux/fs.h index e766be0..257f4d3 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2302,6 +2302,7 @@ extern int vfs_lstat(char __user *, struct kstat *); extern int vfs_stat_fd(int dfd, char __user *, struct kstat *); extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *); extern int vfs_fstat(unsigned int, struct kstat *); +extern int vfs_fstatat(int , char __user *, struct kstat *, int); extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd, unsigned long arg); -- cgit v0.10.2 From 2eae7a1874ca5be3232765d89e0250a449f1bc90 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 8 Apr 2009 16:34:03 -0400 Subject: kill vfs_stat_fd / vfs_lstat_fd There's really no reason to keep vfs_stat_fd and vfs_lstat_fd with Oleg's vfs_fstatat. Use vfs_fstatat for the few cases having the directory fd, and switch all others to vfs_stat / vfs_lstat. Reviewed-by: Christoph Hellwig Signed-off-by: Al Viro diff --git a/fs/compat.c b/fs/compat.c index dda72e2..379a399 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -181,22 +181,24 @@ asmlinkage long compat_sys_newstat(char __user * filename, struct compat_stat __user *statbuf) { struct kstat stat; - int error = vfs_stat_fd(AT_FDCWD, filename, &stat); + int error; - if (!error) - error = cp_compat_stat(&stat, statbuf); - return error; + error = vfs_stat(filename, &stat); + if (error) + return error; + return cp_compat_stat(&stat, statbuf); } asmlinkage long compat_sys_newlstat(char __user * filename, struct compat_stat __user *statbuf) { struct kstat stat; - int error = vfs_lstat_fd(AT_FDCWD, filename, &stat); + int error; - if (!error) - error = cp_compat_stat(&stat, statbuf); - return error; + error = vfs_lstat(filename, &stat); + if (error) + return error; + return cp_compat_stat(&stat, statbuf); } #ifndef __ARCH_WANT_STAT64 diff --git a/fs/stat.c b/fs/stat.c index 5471166..075694e 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -55,46 +55,6 @@ int vfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) EXPORT_SYMBOL(vfs_getattr); -int vfs_stat_fd(int dfd, char __user *name, struct kstat *stat) -{ - struct path path; - int error; - - error = user_path_at(dfd, name, LOOKUP_FOLLOW, &path); - if (!error) { - error = vfs_getattr(path.mnt, path.dentry, stat); - path_put(&path); - } - return error; -} - -int vfs_stat(char __user *name, struct kstat *stat) -{ - return vfs_stat_fd(AT_FDCWD, name, stat); -} - -EXPORT_SYMBOL(vfs_stat); - -int vfs_lstat_fd(int dfd, char __user *name, struct kstat *stat) -{ - struct path path; - int error; - - error = user_path_at(dfd, name, 0, &path); - if (!error) { - error = vfs_getattr(path.mnt, path.dentry, stat); - path_put(&path); - } - return error; -} - -int vfs_lstat(char __user *name, struct kstat *stat) -{ - return vfs_lstat_fd(AT_FDCWD, name, stat); -} - -EXPORT_SYMBOL(vfs_lstat); - int vfs_fstat(unsigned int fd, struct kstat *stat) { struct file *f = fget(fd); @@ -106,26 +66,43 @@ int vfs_fstat(unsigned int fd, struct kstat *stat) } return error; } - EXPORT_SYMBOL(vfs_fstat); int vfs_fstatat(int dfd, char __user *filename, struct kstat *stat, int flag) { + struct path path; int error = -EINVAL; + int lookup_flags = 0; if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) goto out; - if (flag & AT_SYMLINK_NOFOLLOW) - error = vfs_lstat_fd(dfd, filename, stat); - else - error = vfs_stat_fd(dfd, filename, stat); + if (!(flag & AT_SYMLINK_NOFOLLOW)) + lookup_flags |= LOOKUP_FOLLOW; + + error = user_path_at(dfd, filename, lookup_flags, &path); + if (error) + goto out; + + error = vfs_getattr(path.mnt, path.dentry, stat); + path_put(&path); out: return error; } - EXPORT_SYMBOL(vfs_fstatat); +int vfs_stat(char __user *name, struct kstat *stat) +{ + return vfs_fstatat(AT_FDCWD, name, stat, 0); +} +EXPORT_SYMBOL(vfs_stat); + +int vfs_lstat(char __user *name, struct kstat *stat) +{ + return vfs_fstatat(AT_FDCWD, name, stat, AT_SYMLINK_NOFOLLOW); +} +EXPORT_SYMBOL(vfs_lstat); + #ifdef __ARCH_WANT_OLD_STAT @@ -173,23 +150,25 @@ static int cp_old_stat(struct kstat *stat, struct __old_kernel_stat __user * sta SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf) { struct kstat stat; - int error = vfs_stat_fd(AT_FDCWD, filename, &stat); + int error; - if (!error) - error = cp_old_stat(&stat, statbuf); + error = vfs_stat(filename, &stat); + if (error) + return error; - return error; + return cp_old_stat(&stat, statbuf); } SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf) { struct kstat stat; - int error = vfs_lstat_fd(AT_FDCWD, filename, &stat); + int error; - if (!error) - error = cp_old_stat(&stat, statbuf); + error = vfs_lstat(filename, &stat); + if (error) + return error; - return error; + return cp_old_stat(&stat, statbuf); } SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, statbuf) @@ -258,23 +237,23 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf) SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf) { struct kstat stat; - int error = vfs_stat_fd(AT_FDCWD, filename, &stat); - - if (!error) - error = cp_new_stat(&stat, statbuf); + int error = vfs_stat(filename, &stat); - return error; + if (error) + return error; + return cp_new_stat(&stat, statbuf); } SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf) { struct kstat stat; - int error = vfs_lstat_fd(AT_FDCWD, filename, &stat); + int error; - if (!error) - error = cp_new_stat(&stat, statbuf); + error = vfs_lstat(filename, &stat); + if (error) + return error; - return error; + return cp_new_stat(&stat, statbuf); } #if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT) diff --git a/include/linux/fs.h b/include/linux/fs.h index 257f4d3..8f42b35 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2299,8 +2299,6 @@ extern int vfs_readdir(struct file *, filldir_t, void *); extern int vfs_stat(char __user *, struct kstat *); extern int vfs_lstat(char __user *, struct kstat *); -extern int vfs_stat_fd(int dfd, char __user *, struct kstat *); -extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *); extern int vfs_fstat(unsigned int, struct kstat *); extern int vfs_fstatat(int , char __user *, struct kstat *, int); -- cgit v0.10.2 From 38e23c95f92a84fb8505a9f572b8a209c9c372c1 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 9 Apr 2009 20:17:52 +0900 Subject: fs: Mark get_filesystem_list() as __init function. "int get_filesystem_list(char * buf)" is called by only "static void __init get_fs_names(char *page)". We can mark get_filesystem_list() as "__init". Signed-off-by: Tetsuo Handa Signed-off-by: Al Viro diff --git a/fs/filesystems.c b/fs/filesystems.c index 1aa7026..a24c58e 100644 --- a/fs/filesystems.c +++ b/fs/filesystems.c @@ -199,7 +199,7 @@ SYSCALL_DEFINE3(sysfs, int, option, unsigned long, arg1, unsigned long, arg2) return retval; } -int get_filesystem_list(char * buf) +int __init get_filesystem_list(char *buf) { int len = 0; struct file_system_type * tmp; diff --git a/include/linux/fs.h b/include/linux/fs.h index 8f42b35..5bed436 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2448,7 +2448,7 @@ struct ctl_table; int proc_nr_files(struct ctl_table *table, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos); -int get_filesystem_list(char * buf); +int __init get_filesystem_list(char *buf); #endif /* __KERNEL__ */ #endif /* _LINUX_FS_H */ -- cgit v0.10.2 From be9208dff23af904655807672dd8235abf6ac039 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 20 Apr 2009 23:29:41 -0400 Subject: reiserfs: fix j_last_flush_trans_id type Conversion in commit 600ed41675d8c384519d8f0b3c76afed39ef2f4b had missed that one, but converted format from %lu to %u. As the result, /proc/..../journal got buggered on 64bit boxen. Signed-off-by: Al Viro diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h index 5621d87..6b361d2 100644 --- a/include/linux/reiserfs_fs_sb.h +++ b/include/linux/reiserfs_fs_sb.h @@ -193,7 +193,7 @@ struct reiserfs_journal { atomic_t j_wcount; /* count of writers for current commit */ unsigned long j_bcount; /* batch count. allows turning X transactions into 1 */ unsigned long j_first_unflushed_offset; /* first unflushed transactions offset */ - unsigned long j_last_flush_trans_id; /* last fully flushed journal timestamp */ + unsigned j_last_flush_trans_id; /* last fully flushed journal timestamp */ struct buffer_head *j_header_bh; time_t j_trans_start_time; /* time this transaction started */ -- cgit v0.10.2 From 8531f1f14a85c004d5063a0a78c72d0b686ccb8e Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 20 Apr 2009 21:12:25 -0700 Subject: IB/mthca: Fix timeout for INIT_HCA and a few other commands Commands INIT_HCA, CLOSE_HCA, SYS_EN, SYS_DIS, and CLOSE_IB all have 1 second timeouts. For INIT_HCA this causes problems when had more than 2^18 are QPs configured, since the command takes more than 1 second to complete. All other commands have 60-second timeouts. This patch makes the above commands consistent with the rest of the commands (and with the chip documentation). This patch is an expansion of a patch from Arthur Kepner fixing just the INIT_HCA timeout. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index c33e1c5..6d55f9d 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -157,13 +157,15 @@ enum { enum { CMD_TIME_CLASS_A = (HZ + 999) / 1000 + 1, CMD_TIME_CLASS_B = (HZ + 99) / 100 + 1, - CMD_TIME_CLASS_C = (HZ + 9) / 10 + 1 + CMD_TIME_CLASS_C = (HZ + 9) / 10 + 1, + CMD_TIME_CLASS_D = 60 * HZ }; #else enum { CMD_TIME_CLASS_A = 60 * HZ, CMD_TIME_CLASS_B = 60 * HZ, - CMD_TIME_CLASS_C = 60 * HZ + CMD_TIME_CLASS_C = 60 * HZ, + CMD_TIME_CLASS_D = 60 * HZ }; #endif @@ -598,7 +600,7 @@ int mthca_SYS_EN(struct mthca_dev *dev, u8 *status) u64 out; int ret; - ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, HZ, status); + ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, CMD_TIME_CLASS_D, status); if (*status == MTHCA_CMD_STAT_DDR_MEM_ERR) mthca_warn(dev, "SYS_EN DDR error: syn=%x, sock=%d, " @@ -611,7 +613,7 @@ int mthca_SYS_EN(struct mthca_dev *dev, u8 *status) int mthca_SYS_DIS(struct mthca_dev *dev, u8 *status) { - return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, HZ, status); + return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, CMD_TIME_CLASS_C, status); } static int mthca_map_cmd(struct mthca_dev *dev, u16 op, struct mthca_icm *icm, @@ -1390,7 +1392,7 @@ int mthca_INIT_HCA(struct mthca_dev *dev, MTHCA_PUT(inbox, param->uarc_base, INIT_HCA_UAR_CTX_BASE_OFFSET); } - err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, HZ, status); + err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, CMD_TIME_CLASS_D, status); mthca_free_mailbox(dev, mailbox); return err; @@ -1450,12 +1452,12 @@ int mthca_INIT_IB(struct mthca_dev *dev, int mthca_CLOSE_IB(struct mthca_dev *dev, int port, u8 *status) { - return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, HZ, status); + return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, CMD_TIME_CLASS_A, status); } int mthca_CLOSE_HCA(struct mthca_dev *dev, int panic, u8 *status) { - return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, HZ, status); + return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, CMD_TIME_CLASS_C, status); } int mthca_SET_IB(struct mthca_dev *dev, struct mthca_set_ib_param *param, -- cgit v0.10.2 From 88bea188b85f9cefefbbd56b8a48d0f798409177 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 21 Apr 2009 00:35:47 -0400 Subject: ACPI: add /sys/firmware/acpi/interrupts/sci_not counter This counter may prove useful in debugging some spurious interrupt issues seen in the field. Signed-off-by: Len Brown diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index e8ffc70..4f9ba3c 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -69,9 +69,13 @@ Description: gpe1F: 0 invalid gpe_all: 1192 sci: 1194 + sci_not: 0 - sci - The total number of times the ACPI SCI - has claimed an interrupt. + sci - The number of times the ACPI SCI + has been called and claimed an interrupt. + + sci_not - The number of times the ACPI SCI + has been called and NOT claimed an interrupt. gpe_all - count of SCI caused by GPEs. diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index d59f08e..d916bea 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -353,8 +353,10 @@ static irqreturn_t acpi_irq(int irq, void *dev_id) if (handled) { acpi_irq_handled++; return IRQ_HANDLED; - } else + } else { + acpi_irq_not_handled++; return IRQ_NONE; + } } acpi_status diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index da51f05..0944dae 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -38,6 +38,7 @@ ACPI_MODULE_NAME("system"); #define ACPI_SYSTEM_DEVICE_NAME "System" u32 acpi_irq_handled; +u32 acpi_irq_not_handled; /* * Make ACPICA version work as module param @@ -214,8 +215,9 @@ err: #define COUNT_GPE 0 #define COUNT_SCI 1 /* acpi_irq_handled */ -#define COUNT_ERROR 2 /* other */ -#define NUM_COUNTERS_EXTRA 3 +#define COUNT_SCI_NOT 2 /* acpi_irq_not_handled */ +#define COUNT_ERROR 3 /* other */ +#define NUM_COUNTERS_EXTRA 4 struct event_counter { u32 count; @@ -317,6 +319,8 @@ static ssize_t counter_show(struct kobject *kobj, all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count = acpi_irq_handled; + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count = + acpi_irq_not_handled; all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count = acpi_gpe_count; @@ -363,6 +367,7 @@ static ssize_t counter_set(struct kobject *kobj, all_counters[i].count = 0; acpi_gpe_count = 0; acpi_irq_handled = 0; + acpi_irq_not_handled = 0; goto end; } @@ -456,6 +461,8 @@ void acpi_irq_stats_init(void) sprintf(buffer, "gpe_all"); else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) sprintf(buffer, "sci"); + else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT) + sprintf(buffer, "sci_not"); else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR) sprintf(buffer, "error"); else diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 6586cbd..88be890 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -111,6 +111,7 @@ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base); int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base); void acpi_irq_stats_init(void); extern u32 acpi_irq_handled; +extern u32 acpi_irq_not_handled; extern struct acpi_mcfg_allocation *pci_mmcfg_config; extern int pci_mmcfg_config_num; -- cgit v0.10.2 From cfbf1eecd70db9a7a49c42a0613c00f7a2a86dfb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 20 Apr 2009 22:54:25 +0200 Subject: ALSA: AOA: Convert onyx and tas codecs to new-style i2c drivers The legacy i2c binding model is going away soon, so convert the AOA codec drivers to the new model or they'll break. Signed-off-by: Jean Delvare Tested-by: Johannes Berg Tested-by: Andreas Schwab Cc: Benjamin Herrenschmidt Signed-off-by: Takashi Iwai diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c index 15500b9..84bb07d 100644 --- a/sound/aoa/codecs/onyx.c +++ b/sound/aoa/codecs/onyx.c @@ -47,7 +47,7 @@ MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa"); struct onyx { /* cache registers 65 to 80, they are write-only! */ u8 cache[16]; - struct i2c_client i2c; + struct i2c_client *i2c; struct aoa_codec codec; u32 initialised:1, spdif_locked:1, @@ -72,7 +72,7 @@ static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value) *value = onyx->cache[reg-FIRSTREGISTER]; return 0; } - v = i2c_smbus_read_byte_data(&onyx->i2c, reg); + v = i2c_smbus_read_byte_data(onyx->i2c, reg); if (v < 0) return -1; *value = (u8)v; @@ -84,7 +84,7 @@ static int onyx_write_register(struct onyx *onyx, u8 reg, u8 value) { int result; - result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value); + result = i2c_smbus_write_byte_data(onyx->i2c, reg, value); if (!result) onyx->cache[reg-FIRSTREGISTER] = value; return result; @@ -996,12 +996,45 @@ static void onyx_exit_codec(struct aoa_codec *codec) onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx); } -static struct i2c_driver onyx_driver; - static int onyx_create(struct i2c_adapter *adapter, struct device_node *node, int addr) { + struct i2c_board_info info; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE); + info.addr = addr; + info.platform_data = node; + client = i2c_new_device(adapter, &info); + if (!client) + return -ENODEV; + + /* + * We know the driver is already loaded, so the device should be + * already bound. If not it means binding failed, which suggests + * the device doesn't really exist and should be deleted. + * Ideally this would be replaced by better checks _before_ + * instantiating the device. + */ + if (!client->driver) { + i2c_unregister_device(client); + return -ENODEV; + } + + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); + return 0; +} + +static int onyx_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *node = client->dev.platform_data; struct onyx *onyx; u8 dummy; @@ -1011,20 +1044,12 @@ static int onyx_create(struct i2c_adapter *adapter, return -ENOMEM; mutex_init(&onyx->mutex); - onyx->i2c.driver = &onyx_driver; - onyx->i2c.adapter = adapter; - onyx->i2c.addr = addr & 0x7f; - strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE); - - if (i2c_attach_client(&onyx->i2c)) { - printk(KERN_ERR PFX "failed to attach to i2c\n"); - goto fail; - } + onyx->i2c = client; + i2c_set_clientdata(client, onyx); /* we try to read from register ONYX_REG_CONTROL * to check if the codec is present */ if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) { - i2c_detach_client(&onyx->i2c); printk(KERN_ERR PFX "failed to read control register\n"); goto fail; } @@ -1036,14 +1061,14 @@ static int onyx_create(struct i2c_adapter *adapter, onyx->codec.node = of_node_get(node); if (aoa_codec_register(&onyx->codec)) { - i2c_detach_client(&onyx->i2c); goto fail; } printk(KERN_DEBUG PFX "created and attached onyx instance\n"); return 0; fail: + i2c_set_clientdata(client, NULL); kfree(onyx); - return -EINVAL; + return -ENODEV; } static int onyx_i2c_attach(struct i2c_adapter *adapter) @@ -1080,28 +1105,33 @@ static int onyx_i2c_attach(struct i2c_adapter *adapter) return onyx_create(adapter, NULL, 0x47); } -static int onyx_i2c_detach(struct i2c_client *client) +static int onyx_i2c_remove(struct i2c_client *client) { - struct onyx *onyx = container_of(client, struct onyx, i2c); - int err; + struct onyx *onyx = i2c_get_clientdata(client); - if ((err = i2c_detach_client(client))) - return err; aoa_codec_unregister(&onyx->codec); of_node_put(onyx->codec.node); if (onyx->codec_info) kfree(onyx->codec_info); + i2c_set_clientdata(client, onyx); kfree(onyx); return 0; } +static const struct i2c_device_id onyx_i2c_id[] = { + { "aoa_codec_onyx", 0 }, + { } +}; + static struct i2c_driver onyx_driver = { .driver = { .name = "aoa_codec_onyx", .owner = THIS_MODULE, }, .attach_adapter = onyx_i2c_attach, - .detach_client = onyx_i2c_detach, + .probe = onyx_i2c_probe, + .remove = onyx_i2c_remove, + .id_table = onyx_i2c_id, }; static int __init onyx_init(void) diff --git a/sound/aoa/codecs/tas.c b/sound/aoa/codecs/tas.c index 008e0f8..f0ebc971 100644 --- a/sound/aoa/codecs/tas.c +++ b/sound/aoa/codecs/tas.c @@ -82,7 +82,7 @@ MODULE_DESCRIPTION("tas codec driver for snd-aoa"); struct tas { struct aoa_codec codec; - struct i2c_client i2c; + struct i2c_client *i2c; u32 mute_l:1, mute_r:1 , controls_created:1 , drc_enabled:1, @@ -108,9 +108,9 @@ static struct tas *codec_to_tas(struct aoa_codec *codec) static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data) { if (len == 1) - return i2c_smbus_write_byte_data(&tas->i2c, reg, *data); + return i2c_smbus_write_byte_data(tas->i2c, reg, *data); else - return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data); + return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data); } static void tas3004_set_drc(struct tas *tas) @@ -882,12 +882,34 @@ static void tas_exit_codec(struct aoa_codec *codec) } -static struct i2c_driver tas_driver; - static int tas_create(struct i2c_adapter *adapter, struct device_node *node, int addr) { + struct i2c_board_info info; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE); + info.addr = addr; + info.platform_data = node; + + client = i2c_new_device(adapter, &info); + if (!client) + return -ENODEV; + + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); + return 0; +} + +static int tas_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *node = client->dev.platform_data; struct tas *tas; tas = kzalloc(sizeof(struct tas), GFP_KERNEL); @@ -896,17 +918,11 @@ static int tas_create(struct i2c_adapter *adapter, return -ENOMEM; mutex_init(&tas->mtx); - tas->i2c.driver = &tas_driver; - tas->i2c.adapter = adapter; - tas->i2c.addr = addr; + tas->i2c = client; + i2c_set_clientdata(client, tas); + /* seems that half is a saner default */ tas->drc_range = TAS3004_DRC_MAX / 2; - strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE); - - if (i2c_attach_client(&tas->i2c)) { - printk(KERN_ERR PFX "failed to attach to i2c\n"); - goto fail; - } strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN); tas->codec.owner = THIS_MODULE; @@ -915,14 +931,12 @@ static int tas_create(struct i2c_adapter *adapter, tas->codec.node = of_node_get(node); if (aoa_codec_register(&tas->codec)) { - goto detach; + goto fail; } printk(KERN_DEBUG "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n", - addr, node->full_name); + (unsigned int)client->addr, node->full_name); return 0; - detach: - i2c_detach_client(&tas->i2c); fail: mutex_destroy(&tas->mtx); kfree(tas); @@ -970,14 +984,11 @@ static int tas_i2c_attach(struct i2c_adapter *adapter) return -ENODEV; } -static int tas_i2c_detach(struct i2c_client *client) +static int tas_i2c_remove(struct i2c_client *client) { - struct tas *tas = container_of(client, struct tas, i2c); - int err; + struct tas *tas = i2c_get_clientdata(client); u8 tmp = TAS_ACR_ANALOG_PDOWN; - if ((err = i2c_detach_client(client))) - return err; aoa_codec_unregister(&tas->codec); of_node_put(tas->codec.node); @@ -989,13 +1000,20 @@ static int tas_i2c_detach(struct i2c_client *client) return 0; } +static const struct i2c_device_id tas_i2c_id[] = { + { "aoa_codec_tas", 0 }, + { } +}; + static struct i2c_driver tas_driver = { .driver = { .name = "aoa_codec_tas", .owner = THIS_MODULE, }, .attach_adapter = tas_i2c_attach, - .detach_client = tas_i2c_detach, + .probe = tas_i2c_probe, + .remove = tas_i2c_remove, + .id_table = tas_i2c_id, }; static int __init tas_init(void) -- cgit v0.10.2 From 5de4155bb3760fc13a172c5cef2368ce218ebe1c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 20 Apr 2009 22:56:59 +0200 Subject: ALSA: keywest: Convert to new-style i2c driver The legacy i2c binding model is going away soon, so convert the ppc keywest sound driver to the new model or it will break. Signed-off-by: Jean Delvare Cc: Benjamin Herrenschmidt Signed-off-by: Takashi Iwai diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c index 6ff99ed..a5afb26 100644 --- a/sound/ppc/keywest.c +++ b/sound/ppc/keywest.c @@ -33,26 +33,25 @@ static struct pmac_keywest *keywest_ctx; -static int keywest_attach_adapter(struct i2c_adapter *adapter); -static int keywest_detach_client(struct i2c_client *client); - -struct i2c_driver keywest_driver = { - .driver = { - .name = "PMac Keywest Audio", - }, - .attach_adapter = &keywest_attach_adapter, - .detach_client = &keywest_detach_client, -}; - - #ifndef i2c_device_name #define i2c_device_name(x) ((x)->name) #endif +static int keywest_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + i2c_set_clientdata(client, keywest_ctx); + return 0; +} + +/* + * This is kind of a hack, best would be to turn powermac to fixed i2c + * bus numbers and declare the sound device as part of platform + * initialization + */ static int keywest_attach_adapter(struct i2c_adapter *adapter) { - int err; - struct i2c_client *new_client; + struct i2c_board_info info; if (! keywest_ctx) return -EINVAL; @@ -60,46 +59,47 @@ static int keywest_attach_adapter(struct i2c_adapter *adapter) if (strncmp(i2c_device_name(adapter), "mac-io", 6)) return 0; /* ignored */ - new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (! new_client) - return -ENOMEM; - - new_client->addr = keywest_ctx->addr; - i2c_set_clientdata(new_client, keywest_ctx); - new_client->adapter = adapter; - new_client->driver = &keywest_driver; - new_client->flags = 0; - - strcpy(i2c_device_name(new_client), keywest_ctx->name); - keywest_ctx->client = new_client; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "keywest", I2C_NAME_SIZE); + info.addr = keywest_ctx->addr; + keywest_ctx->client = i2c_new_device(adapter, &info); - /* Tell the i2c layer a new client has arrived */ - if (i2c_attach_client(new_client)) { - snd_printk(KERN_ERR "tumbler: cannot attach i2c client\n"); - err = -ENODEV; - goto __err; - } - + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&keywest_ctx->client->detected, + &keywest_ctx->client->driver->clients); return 0; - - __err: - kfree(new_client); - keywest_ctx->client = NULL; - return err; } -static int keywest_detach_client(struct i2c_client *client) +static int keywest_remove(struct i2c_client *client) { + i2c_set_clientdata(client, NULL); if (! keywest_ctx) return 0; if (client == keywest_ctx->client) keywest_ctx->client = NULL; - i2c_detach_client(client); - kfree(client); return 0; } + +static const struct i2c_device_id keywest_i2c_id[] = { + { "keywest", 0 }, + { } +}; + +struct i2c_driver keywest_driver = { + .driver = { + .name = "PMac Keywest Audio", + }, + .attach_adapter = keywest_attach_adapter, + .probe = keywest_probe, + .remove = keywest_remove, + .id_table = keywest_i2c_id, +}; + /* exported */ void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c) { -- cgit v0.10.2 From bb023080fe72f1f80648e9b60771d9a94ce75aca Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 21 Apr 2009 07:35:25 +0200 Subject: ALSA: hda - Fix alc662_init_verbs Don't unmute unneeded amps for input mixers of ALC662 & co. It caused possible recording noises. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6ed787e..78bea2c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -15641,14 +15641,7 @@ static struct hda_verb alc662_init_verbs[] = { /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ /* Input mixer */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* always trun on EAPD */ {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2}, -- cgit v0.10.2 From 622e84cdff719b9dcd3f495ddb0afb54995799cc Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 21 Apr 2009 07:39:04 +0200 Subject: ALSA: hda - Add quirks for Realtek codecs - Support ASUS F81Se F5Q P80 U20A U80 U50 UX50 for ALC269 - Support ASUS F70SL UX20 X58LE F50Z N80Vc N81Te N505Tp Vx3V N5051A for ALC663 - Support DELL ZM1 for ALC272 Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 78bea2c..c9300a3 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -188,6 +188,8 @@ enum { ALC663_ASUS_MODE4, ALC663_ASUS_MODE5, ALC663_ASUS_MODE6, + ALC272_DELL, + ALC272_DELL_ZM1, ALC662_AUTO, ALC662_MODEL_LAST, }; @@ -12976,10 +12978,17 @@ static struct snd_pci_quirk alc269_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1), SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_EEEPC_P703), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901", ALC269_ASUS_EEEPC_P901), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101", ALC269_ASUS_EEEPC_P901), + SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_EEEPC_P901), SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU), SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK), {} @@ -15210,12 +15219,23 @@ static hda_nid_t alc662_dac_nids[4] = { 0x02, 0x03, 0x04 }; +static hda_nid_t alc272_dac_nids[2] = { + 0x02, 0x03 +}; + static hda_nid_t alc662_adc_nids[1] = { /* ADC1-2 */ 0x09, }; +static hda_nid_t alc272_adc_nids[1] = { + /* ADC1-2 */ + 0x08, +}; + static hda_nid_t alc662_capsrc_nids[1] = { 0x22 }; +static hda_nid_t alc272_capsrc_nids[1] = { 0x23 }; + /* input MUX */ /* FIXME: should be a matrix-type input source selection */ @@ -15836,12 +15856,48 @@ static struct hda_verb alc662_ecs_init_verbs[] = { {} }; +static struct hda_verb alc272_dell_zm1_init_verbs[] = { + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)}, + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT}, + {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {} +}; + +static struct hda_verb alc272_dell_init_verbs[] = { + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */ + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)}, + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT}, + {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {} +}; + static struct snd_kcontrol_new alc662_auto_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT), { } /* end */ }; +static struct snd_kcontrol_new alc272_auto_capture_mixer[] = { + HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), + { } /* end */ +}; + static void alc662_lenovo_101e_ispeaker_automute(struct hda_codec *codec) { unsigned int present; @@ -16353,6 +16409,8 @@ static const char *alc662_models[ALC662_MODEL_LAST] = { static struct snd_pci_quirk alc662_cfg_tbl[] = { SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS), + SND_PCI_QUIRK(0x1028, 0x02d6, "DELL", ALC272_DELL), + SND_PCI_QUIRK(0x1028, 0x02f4, "DELL ZM1", ALC272_DELL_ZM1), SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3), SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3), @@ -16365,26 +16423,36 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6), SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6), SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x17c3, "ASUS UX20", ALC663_ASUS_M51VA), + SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5), SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6), SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA), /*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/ SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3), SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V), /*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/ SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x19d3, "ASUS NB", ALC663_ASUS_M51VA), SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4), SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG), @@ -16633,6 +16701,36 @@ static struct alc_config_preset alc662_presets[] = { .unsol_event = alc663_mode6_unsol_event, .init_hook = alc663_mode6_inithook, }, + [ALC272_DELL] = { + .mixers = { alc663_m51va_mixer }, + .cap_mixer = alc272_auto_capture_mixer, + .init_verbs = { alc662_init_verbs, alc272_dell_init_verbs }, + .num_dacs = ARRAY_SIZE(alc272_dac_nids), + .dac_nids = alc662_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .adc_nids = alc272_adc_nids, + .num_adc_nids = ARRAY_SIZE(alc272_adc_nids), + .capsrc_nids = alc272_capsrc_nids, + .channel_mode = alc662_3ST_2ch_modes, + .input_mux = &alc663_m51va_capture_source, + .unsol_event = alc663_m51va_unsol_event, + .init_hook = alc663_m51va_inithook, + }, + [ALC272_DELL_ZM1] = { + .mixers = { alc663_m51va_mixer }, + .cap_mixer = alc662_auto_capture_mixer, + .init_verbs = { alc662_init_verbs, alc272_dell_zm1_init_verbs }, + .num_dacs = ARRAY_SIZE(alc272_dac_nids), + .dac_nids = alc662_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .adc_nids = alc662_adc_nids, + .num_adc_nids = ARRAY_SIZE(alc662_adc_nids), + .capsrc_nids = alc662_capsrc_nids, + .channel_mode = alc662_3ST_2ch_modes, + .input_mux = &alc663_m51va_capture_source, + .unsol_event = alc663_m51va_unsol_event, + .init_hook = alc663_m51va_inithook, + }, }; -- cgit v0.10.2 From 2f537a9f8e82f55c241b002c8cfbf34303b45ada Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 21 Apr 2009 16:00:15 +0930 Subject: x86: fix boot crash in NMI watchdog with CONFIG_CPUMASK_OFFSTACK=y and flat APIC fcef8576d8a64fc603e719c97d423f9f6d4e0e8b converted backtrace_mask to a cpumask_var_t, and assumed check_nmi_watchdog was called before nmi_watchdog_tick was ever called. Steven's oops shows I was wrong. This is something of a bandaid: I'm not sure we *should* be calling nmi_watchdog_tick before check_nmi_watchdog. Note that gcc eliminates this test for the CONFIG_CPUMASK_OFFSTACK=n case. [ Impact: fix boot crash in rare configs ] Reported-by: Steven Rostedt Signed-off-by: Rusty Russell LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index d6bd624..2ba52f3 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -414,7 +414,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } - if (cpumask_test_cpu(cpu, backtrace_mask)) { + /* We can be called before check_nmi_watchdog, hence NULL check. */ + if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) { static DEFINE_SPINLOCK(lock); /* Serialise the printks */ spin_lock(&lock); -- cgit v0.10.2 From fcc5c4a2feea3886dc058498b28508b2731720d5 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 21 Apr 2009 16:03:41 +0930 Subject: x86: avoid theoretical spurious NMI backtraces with CONFIG_CPUMASK_OFFSTACK=y In theory (though not shown in practice) alloc_cpumask_var() doesn't zero memory, so CPUs might print an "NMI backtrace for cpu %d" once on boot. (Bug introduced in fcef8576d8a64fc603e719c97d423f9f6d4e0e8b). [ Impact: avoid theoretical syslog noise in rare configs ] Signed-off-by: Rusty Russell Cc: Steven Rostedt LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index 2ba52f3..ce4fbfa 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -138,7 +138,7 @@ int __init check_nmi_watchdog(void) if (!prev_nmi_count) goto error; - alloc_cpumask_var(&backtrace_mask, GFP_KERNEL); + alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO); printk(KERN_INFO "Testing NMI watchdog ... "); #ifdef CONFIG_SMP -- cgit v0.10.2 From 9a4f92a603cd72ee534cead20cbc627b34cfc884 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:24:28 +0000 Subject: mlx4_en: Fix error handling while activating RX rings In case of failure of either srq creation or page allocation, the cleanup code handled the failed ring as well, and tried to destroy resources that where not allocated. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 7e40741..8673008 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -436,8 +436,9 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv) /* Initialize page allocators */ err = mlx4_en_init_allocator(priv, ring); if (err) { - mlx4_err(mdev, "Failed initializing ring allocator\n"); - goto err_allocator; + mlx4_err(mdev, "Failed initializing ring allocator\n"); + ring_ind--; + goto err_allocator; } /* Fill Rx buffers */ @@ -467,6 +468,7 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv) ring->wqres.db.dma, &ring->srq); if (err){ mlx4_err(mdev, "Failed to allocate srq\n"); + ring_ind--; goto err_srq; } ring->srq.event = mlx4_en_srq_event; -- cgit v0.10.2 From 1e338db56e5a6a5bb93884c1fb3b0b9f01958f93 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:26:05 +0000 Subject: mlx4_en: Fix a race at restart task The query whether the port is up or not should be done at the execution of the restart task and not when it is queued. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index 303c23d..09fb7cf 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -348,11 +348,9 @@ static void mlx4_en_tx_timeout(struct net_device *dev) if (netif_msg_timer(priv)) mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port); - if (netif_carrier_ok(dev)) { - priv->port_stats.tx_timeout++; - mlx4_dbg(DRV, priv, "Scheduling watchdog\n"); - queue_work(mdev->workqueue, &priv->watchdog_task); - } + priv->port_stats.tx_timeout++; + mlx4_dbg(DRV, priv, "Scheduling watchdog\n"); + queue_work(mdev->workqueue, &priv->watchdog_task); } @@ -761,9 +759,14 @@ static void mlx4_en_restart(struct work_struct *work) struct net_device *dev = priv->dev; mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port); - mlx4_en_stop_port(dev); - if (mlx4_en_start_port(dev)) - mlx4_err(mdev, "Failed restarting port %d\n", priv->port); + + mutex_lock(&mdev->state_lock); + if (priv->port_up) { + mlx4_en_stop_port(dev); + if (mlx4_en_start_port(dev)) + mlx4_err(mdev, "Failed restarting port %d\n", priv->port); + } + mutex_unlock(&mdev->state_lock); } -- cgit v0.10.2 From 966508f7a591399a0b0dcfc0336e88480e5ed520 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:30:03 +0000 Subject: mlx4_en: Assign dummy event handler for TX queue The low level driver always assumes this handler exists. The lack of it could cause kernel panic Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/mlx4/en_resources.c b/drivers/net/mlx4/en_resources.c index a054520..65ca706 100644 --- a/drivers/net/mlx4/en_resources.c +++ b/drivers/net/mlx4/en_resources.c @@ -94,3 +94,9 @@ void mlx4_en_unmap_buffer(struct mlx4_buf *buf) vunmap(buf->direct.buf); } + +void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event) +{ + return; +} + diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 8673008..0cbb78c 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -928,12 +928,6 @@ void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv, } } -static void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event) -{ - return; -} - - static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, int qpn, int srqn, int cqn, enum mlx4_qp_state *state, diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 4afd599..ac6fc49 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -112,6 +112,7 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn); goto err_reserve; } + ring->qp.event = mlx4_en_sqp_event; return 0; diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index e9af32d..ef840ab 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -538,6 +538,7 @@ int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget); void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, int is_tx, int rss, int qpn, int cqn, int srqn, struct mlx4_qp_context *context); +void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event); int mlx4_en_map_buffer(struct mlx4_buf *buf); void mlx4_en_unmap_buffer(struct mlx4_buf *buf); -- cgit v0.10.2 From 45b4d66d690600dac1aa805b75763331483acf22 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:33:15 +0000 Subject: mlx4_en: use NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM for tx csum at initialization The former usage was to set the NETIF_F_HW_CSUM flag which is not used in get_tx_csum. It caused Ethtool to show tx checksum as "on" even though it was turned off in previous operation. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index 09fb7cf..438678a 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -1057,7 +1057,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, * Set driver features */ dev->features |= NETIF_F_SG; - dev->features |= NETIF_F_HW_CSUM; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | -- cgit v0.10.2 From b1b243afac302d181d19c8024c355d9677beab49 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:34:38 +0000 Subject: mlx4_en: Move to SW counters for total bytes and packets The per ring counters are implemented in SW. Now moving to have the total counters as the sum of all rings. This way the numbers will always be consistent and we no longer depend on HW buffer size limitations for those counters that can be insufficient in some cases. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/mlx4/en_port.c index c5a4c03..a29abe8 100644 --- a/drivers/net/mlx4/en_port.c +++ b/drivers/net/mlx4/en_port.c @@ -151,6 +151,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) struct mlx4_cmd_mailbox *mailbox; u64 in_mod = reset << 8 | port; int err; + int i; mailbox = mlx4_alloc_cmd_mailbox(mdev->dev); if (IS_ERR(mailbox)) @@ -165,38 +166,18 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) spin_lock_bh(&priv->stats_lock); - stats->rx_packets = be32_to_cpu(mlx4_en_stats->RTOTFRMS) - - be32_to_cpu(mlx4_en_stats->RDROP); - stats->tx_packets = be64_to_cpu(mlx4_en_stats->TTOT_prio_0) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_1) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_2) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_3) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_4) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_5) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_6) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_7) + - be64_to_cpu(mlx4_en_stats->TTOT_novlan) + - be64_to_cpu(mlx4_en_stats->TTOT_loopbk); - stats->rx_bytes = be64_to_cpu(mlx4_en_stats->ROCT_prio_0) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_1) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_2) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_3) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_4) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_5) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_6) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_7) + - be64_to_cpu(mlx4_en_stats->ROCT_novlan); - - stats->tx_bytes = be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_0) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_1) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_2) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_3) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_4) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_5) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_6) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_7) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_novlan) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_loopbk); + stats->rx_packets = 0; + stats->rx_bytes = 0; + for (i = 0; i < priv->rx_ring_num; i++) { + stats->rx_packets += priv->rx_ring[i].packets; + stats->rx_bytes += priv->rx_ring[i].bytes; + } + stats->tx_packets = 0; + stats->tx_bytes = 0; + for (i = 0; i <= priv->tx_ring_num; i++) { + stats->tx_packets += priv->tx_ring[i].packets; + stats->tx_bytes += priv->tx_ring[i].bytes; + } stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) + be32_to_cpu(mlx4_en_stats->RdropLength) + -- cgit v0.10.2 From 1a44cc3778f63dca5795708da2a2a7696da7fd61 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 20 Apr 2009 18:32:08 +0000 Subject: mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails If creating a workqueue fails, don't jump to the error path where that same workqueue is destroyed, since destroy_workqueue() can't handle a NULL pointer. This was spotted by the Coverity checker (CID 2617). Signed-off-by: Roland Dreier Signed-off-by: David S. Miller diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c index eda72dd..510633f 100644 --- a/drivers/net/mlx4/en_main.c +++ b/drivers/net/mlx4/en_main.c @@ -181,7 +181,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev) mdev->workqueue = create_singlethread_workqueue("mlx4_en"); if (!mdev->workqueue) { err = -ENOMEM; - goto err_close_nic; + goto err_mr; } /* At this stage all non-port specific tasks are complete: @@ -214,9 +214,8 @@ err_free_netdev: flush_workqueue(mdev->workqueue); /* Stop event queue before we drop down to release shared SW state */ - -err_close_nic: destroy_workqueue(mdev->workqueue); + err_mr: mlx4_mr_free(dev, &mdev->mr); err_uar: -- cgit v0.10.2 From 99b28c47091db2bb7f594a5088831d341a800a33 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sat, 18 Apr 2009 13:44:44 +0000 Subject: pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 2fbf9f9..652a368 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1758,7 +1758,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"), - PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"), + PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), diff --git a/firmware/Makefile b/firmware/Makefile index 142c17a..25200d1 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -46,6 +46,7 @@ fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ e100/d102e_ucode.bin fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin +fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ advansys/3550.bin advansys/38C0800.bin diff --git a/firmware/WHENCE b/firmware/WHENCE index 10f61c9..4c52984 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -576,6 +576,16 @@ Found in hex form in kernel source. -------------------------------------------------------------------------- +Driver: PCMCIA_PCNET - NE2000 compatible PCMCIA adapter + +File: cis/LA-PCM.cis + +Licence: GPL + +Originally developed by the pcmcia-cs project + +-------------------------------------------------------------------------- + Driver: PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA File: ositech/Xilinx7OD.bin diff --git a/firmware/cis/LA-PCM.cis.ihex b/firmware/cis/LA-PCM.cis.ihex new file mode 100644 index 0000000..a0ff0c7 --- /dev/null +++ b/firmware/cis/LA-PCM.cis.ihex @@ -0,0 +1,20 @@ +:100000000105D4F953E9FF17035338FF20040FC04B +:1000100002002102060315390401416C6C69656414 +:100020002054656C657369732C4B2E4B00457468C6 +:1000300065726E6574204C414E20436172640043CA +:10004000656E747265434F4D004C412D50434D0019 +:10005000FF1A0602100000020B1B08810108E06075 +:1000600000021F1B08820108E06020021F1B08839A +:100070000108E06040021F1B08840108E060600284 +:100080001F1B08850108E06080021F1B088601080D +:10009000E060A0021F1B08870108E060C0021F1B70 +:1000A00008880108E060E0021F1B08890108E06081 +:1000B00000031F1B088A0108E06020031F1B088B38 +:1000C0000108E06040031F1B088C0108E06060032A +:1000D0001F1B088D0108E06080031F1B088E0108AC +:1000E000E060A0031F1B088F0108E060C0031F1B16 +:0D00F00008900108E060E0031F1400FF000D +:00000001FF +# +# Replacement CIS for Allied Telesis LA-PCM +# -- cgit v0.10.2 From 1bb593801ee32dd9d983dea3cbedf68f71345f78 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2009 02:08:51 -0700 Subject: atmel: fix netdev ops conversion sparse says: drivers/net/wireless/atmel.c:1501:3: warning: Initializer entry defined twice drivers/net/wireless/atmel.c:1505:3: also defined here and it's correct; atmel has its own ndo_change_mtu and shouldn't use eth_change_mtu. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 857d841..27eef8f 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1502,7 +1502,6 @@ static const struct net_device_ops atmel_netdev_ops = { .ndo_set_mac_address = atmel_set_mac_address, .ndo_start_xmit = start_tx, .ndo_do_ioctl = atmel_ioctl, - .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, }; -- cgit v0.10.2 From e10f9d87c9ac9fdfadb6305dbbc9052e49a02fdd Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 21 Apr 2009 15:17:54 +0200 Subject: [ALSA] ac97_codec: increase timeout for analog subsections On some hardware platforms, the AC97 codec requires more time to wake up. Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 97ee127..78288db 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -2122,7 +2122,7 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template, } /* nothing should be in powerdown mode */ snd_ac97_write_cache(ac97, AC97_GENERAL_PURPOSE, 0); - end_time = jiffies + msecs_to_jiffies(100); + end_time = jiffies + msecs_to_jiffies(120); do { if ((snd_ac97_read(ac97, AC97_POWERDOWN) & 0x0f) == 0x0f) goto __ready_ok; -- cgit v0.10.2 From 30fd9940eee910d847f48bd8740b2d0eaa8d2cfc Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 21 Apr 2009 15:30:31 +0200 Subject: [ALSA] intel8x0: another attempt to fix ac97_clock measure routine Appearently, a big delay ~300ms is required before hw is settled and ready to transfer samples on some hardware variants. Also, return back "clocking to 48000Hz" message when something fails. Signed-off-by: Jaroslav Kysela diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 5dced5b..c4ba486 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -2751,11 +2751,12 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) if (pos == 0) { snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n"); __retry: - if (attempt < 2) { + if (attempt < 3) { + msleep(300); attempt++; goto __again; } - return; + goto __end; } pos /= 4; @@ -2782,6 +2783,7 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) else if (pos < 47500 || pos > 48500) /* not 48000Hz, tuning the clock.. */ chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos; + __end: printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock); snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0); } -- cgit v0.10.2 From 8340437210390676f687633a80e3748c40885dc8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 20 Apr 2009 14:58:35 -0400 Subject: NFS: Fix the XDR iovec calculation in nfs3_xdr_setaclargs Commit ae46141ff08f1965b17c531b571953c39ce8b9e2 (NFSv3: Fix posix ACL code) introduces a bug in the calculation of the XDR header iovec. In the case where we are inlining the acls, we need to adjust the length of the iovec req->rq_svec, in addition to adjusting the total buffer length. Tested-by: Leonardo Chiquitto Tested-by: Suresh Jayaraman Signed-off-by: Trond Myklebust Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c index e6a1932..35869a4 100644 --- a/fs/nfs/nfs3xdr.c +++ b/fs/nfs/nfs3xdr.c @@ -713,7 +713,8 @@ nfs3_xdr_setaclargs(struct rpc_rqst *req, __be32 *p, if (args->npages != 0) xdr_encode_pages(buf, args->pages, 0, args->len); else - req->rq_slen += args->len; + req->rq_slen = xdr_adjust_iovec(req->rq_svec, + p + XDR_QUADLEN(args->len)); err = nfsacl_encode(buf, base, args->inode, (args->mask & NFS_ACL) ? -- cgit v0.10.2 From 8b9cf76d0fa6cd98fe42dd2f86460d6ede55fed8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 21 Apr 2009 13:44:13 +0200 Subject: Fix SYSCALL_ALIAS for older MIPS assembler Older MIPS assembler don't support .set for defining aliases. Using = works for old and new assembers. Signed-off-by: Thomas Bogendoerfer Acked-by: Ralf Baechle Signed-off-by: Linus Torvalds diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index dabe4ad..40617c1 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -148,7 +148,7 @@ struct old_linux_dirent; asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \ "\t.globl ." #alias "\n\t.set ." #alias ", ." #name) #else -#ifdef CONFIG_ALPHA +#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS) #define SYSCALL_ALIAS(alias, name) \ asm ( #alias " = " #name "\n\t.globl " #alias) #else -- cgit v0.10.2 From ce88168f5b5eca7f40394fa6b05ae29f4b685569 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 21 Apr 2009 12:35:15 +0100 Subject: ASoC: Fix offset of freqmode in WM8580 PLL configuration Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index 442ea6f..41aab4a 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -522,7 +522,7 @@ static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai, reg = wm8580_read(codec, WM8580_PLLA4 + offset); reg &= ~0x3f; reg |= pll_div.prescale | pll_div.postscale << 1 | - pll_div.freqmode << 4; + pll_div.freqmode << 3; wm8580_write(codec, WM8580_PLLA4 + offset, reg); -- cgit v0.10.2 From 5bd3729f6818721f76a2a2f7d2ecad899bace340 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 21 Apr 2009 18:36:30 +0200 Subject: ALSA: hda - Add quirk for Packard Bell RS65 Added a quirk (model=m51va) for Packard Bell RS65 with ALC663. Reference: Novell bnc#496787 https://bugzilla.novell.com/show_bug.cgi?id=496787 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c9300a3..b8a0d3e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -16464,6 +16464,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = { SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L", ALC662_3ST_6ch_DIG), SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG), + SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA), SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E), SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0", ALC662_3ST_6ch_DIG), -- cgit v0.10.2 From 546888da82082555a56528730a83f0afd12f33bf Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 21 Apr 2009 11:53:38 -0400 Subject: Btrfs: fix btrfs fallocate oops and deadlock Btrfs fallocate was incorrectly starting a transaction with a lock held on the extent_io tree for the file, which could deadlock. Strictly speaking it was using join_transaction which would be safe, but it is better to move the transaction outside of the lock. When preallocated extents are overwritten, btrfs_mark_buffer_dirty was being called on an unlocked buffer. This was triggering an assertion and oops because the lock is supposed to be held. The bug was calling btrfs_mark_buffer_dirty on a leaf after btrfs_del_item had been run. btrfs_del_item takes care of dirtying things, so the solution is a to skip the btrfs_mark_buffer_dirty call in this case. Signed-off-by: Chris Mason diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index e21c006..482f8db 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -830,7 +830,7 @@ again: ret = btrfs_del_items(trans, root, path, del_slot, del_nr); BUG_ON(ret); - goto done; + goto release; } else if (split == start) { if (locked_end < extent_end) { ret = try_lock_extent(&BTRFS_I(inode)->io_tree, @@ -926,6 +926,8 @@ again: } done: btrfs_mark_buffer_dirty(leaf); + +release: btrfs_release_path(root, path); if (split_end && split == start) { split = end; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a0d1dd4..65219f6 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4970,10 +4970,10 @@ out_fail: return err; } -static int prealloc_file_range(struct inode *inode, u64 start, u64 end, +static int prealloc_file_range(struct btrfs_trans_handle *trans, + struct inode *inode, u64 start, u64 end, u64 alloc_hint, int mode) { - struct btrfs_trans_handle *trans; struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_key ins; u64 alloc_size; @@ -4981,10 +4981,6 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, u64 num_bytes = end - start; int ret = 0; - trans = btrfs_join_transaction(root, 1); - BUG_ON(!trans); - btrfs_set_trans_block_group(trans, inode); - while (num_bytes > 0) { alloc_size = min(num_bytes, root->fs_info->max_extent); ret = btrfs_reserve_extent(trans, root, alloc_size, @@ -5015,7 +5011,6 @@ out: BUG_ON(ret); } - btrfs_end_transaction(trans, root); return ret; } @@ -5029,11 +5024,18 @@ static long btrfs_fallocate(struct inode *inode, int mode, u64 alloc_hint = 0; u64 mask = BTRFS_I(inode)->root->sectorsize - 1; struct extent_map *em; + struct btrfs_trans_handle *trans; int ret; alloc_start = offset & ~mask; alloc_end = (offset + len + mask) & ~mask; + /* + * wait for ordered IO before we have any locks. We'll loop again + * below with the locks held. + */ + btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start); + mutex_lock(&inode->i_mutex); if (alloc_start > inode->i_size) { ret = btrfs_cont_expand(inode, alloc_start); @@ -5043,6 +5045,16 @@ static long btrfs_fallocate(struct inode *inode, int mode, while (1) { struct btrfs_ordered_extent *ordered; + + trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1); + if (!trans) { + ret = -EIO; + goto out; + } + + /* the extent lock is ordered inside the running + * transaction + */ lock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1, GFP_NOFS); ordered = btrfs_lookup_first_ordered_extent(inode, @@ -5053,6 +5065,12 @@ static long btrfs_fallocate(struct inode *inode, int mode, btrfs_put_ordered_extent(ordered); unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1, GFP_NOFS); + btrfs_end_transaction(trans, BTRFS_I(inode)->root); + + /* + * we can't wait on the range with the transaction + * running or with the extent lock held + */ btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start); } else { @@ -5070,7 +5088,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, last_byte = min(extent_map_end(em), alloc_end); last_byte = (last_byte + mask) & ~mask; if (em->block_start == EXTENT_MAP_HOLE) { - ret = prealloc_file_range(inode, cur_offset, + ret = prealloc_file_range(trans, inode, cur_offset, last_byte, alloc_hint, mode); if (ret < 0) { free_extent_map(em); @@ -5089,6 +5107,8 @@ static long btrfs_fallocate(struct inode *inode, int mode, } unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1, GFP_NOFS); + + btrfs_end_transaction(trans, BTRFS_I(inode)->root); out: mutex_unlock(&inode->i_mutex); return ret; -- cgit v0.10.2 From 5bf0da7dd0ae193e072412519cba1d77b6196c61 Mon Sep 17 00:00:00 2001 From: Nicolas Morey-Chaisemartin Date: Tue, 21 Apr 2009 10:11:06 -0700 Subject: mlx4_core: Fix memory leak in mlx4_enable_msi_x() When the msi_x option is enabled but pci_enable_msix() fails (not enough vectors are available etc), the entries array was not freed on the error path. Signed-off-by: Nicolas Morey-Chaisemartin Signed-off-by: Roland Dreier diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 102bac9..30bea96 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -976,7 +976,7 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev) nreq = err; goto retry; } - + kfree(entries); goto no_msi; } -- cgit v0.10.2 From cc005fa20c5229c283bea4958869da1e3c8a3720 Mon Sep 17 00:00:00 2001 From: Matt Kraai Date: Tue, 21 Apr 2009 10:43:21 -0700 Subject: RDMA/nes: Remove root_256()'s unused pbl_count_256 parameter Signed-off-by: Matt Kraai Acked-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index f04bb1a..504e31d 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1895,8 +1895,7 @@ static int nes_destroy_cq(struct ib_cq *ib_cq) static u32 root_256(struct nes_device *nesdev, struct nes_root_vpbl *root_vpbl, struct nes_root_vpbl *new_root, - u16 pbl_count_4k, - u16 pbl_count_256) + u16 pbl_count_4k) { u64 leaf_pbl; int i, j, k; @@ -2012,7 +2011,7 @@ static int nes_reg_mr(struct nes_device *nesdev, struct nes_pd *nespd, } if (use_256_pbls && use_two_level) { - if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k, pbl_count_256) == 1) { + if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k) == 1) { if (new_root.pbl_pbase != 0) root_vpbl = &new_root; } else { -- cgit v0.10.2 From 7400516ab40d8fe55031dc8d614e2b365bd95f1c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 21 Apr 2009 21:47:22 +0200 Subject: go7007: Convert to the new i2c device binding model Move the go7007 driver away from the legacy i2c binding model, which is going away really soon now. The I2C addresses of the audio and video chips in s2250-board didn't look quite right, apparently they were left-aligned values when Linux wants right-aligned values, so I fixed them too. Signed-off-by: Jean Delvare Cc: Greg Kroah-Hartman diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c index f47c0ce..77b1e76 100644 --- a/drivers/staging/go7007/go7007-driver.c +++ b/drivers/staging/go7007/go7007-driver.c @@ -191,8 +191,10 @@ int go7007_reset_encoder(struct go7007 *go) /* * Attempt to instantiate an I2C client by ID, probably loading a module. */ -static int init_i2c_module(struct i2c_adapter *adapter, int id, int addr) +static int init_i2c_module(struct i2c_adapter *adapter, const char *type, + int id, int addr) { + struct i2c_board_info info; char *modname; switch (id) { @@ -226,7 +228,11 @@ static int init_i2c_module(struct i2c_adapter *adapter, int id, int addr) } if (modname != NULL) request_module(modname); - if (wis_i2c_probe_device(adapter, id, addr) == 1) + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = addr; + strlcpy(info.type, type, I2C_NAME_SIZE); + if (!i2c_new_device(adapter, &info)) return 0; if (modname != NULL) printk(KERN_INFO @@ -266,6 +272,7 @@ int go7007_register_encoder(struct go7007 *go) if (go->i2c_adapter_online) { for (i = 0; i < go->board_info->num_i2c_devs; ++i) init_i2c_module(&go->i2c_adapter, + go->board_info->i2c_devs[i].type, go->board_info->i2c_devs[i].id, go->board_info->i2c_devs[i].addr); if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) diff --git a/drivers/staging/go7007/go7007-i2c.c b/drivers/staging/go7007/go7007-i2c.c index cd55b76..c82867f 100644 --- a/drivers/staging/go7007/go7007-i2c.c +++ b/drivers/staging/go7007/go7007-i2c.c @@ -31,87 +31,6 @@ #include "go7007-priv.h" #include "wis-i2c.h" -/************** Registration interface for I2C client drivers **************/ - -/* Since there's no way to auto-probe the I2C devices connected to the I2C - * bus on the go7007, we have this silly little registration system that - * client drivers can use to register their I2C driver ID and their - * detect_client function (the one that's normally passed to i2c_probe). - * - * When a new go7007 device is connected, we can look up in a board info - * table by the USB or PCI vendor/product/revision ID to determine - * which I2C client module to load. The client driver module will register - * itself here, and then we can call the registered detect_client function - * to force-load a new client at the address listed in the board info table. - * - * Really the I2C subsystem should have a way to force-load I2C client - * drivers when we have a priori knowledge of what's on the bus, especially - * since the existing I2C auto-probe mechanism is so hokey, but we'll use - * our own mechanism for the time being. */ - -struct wis_i2c_client_driver { - unsigned int id; - found_proc found_proc; - struct list_head list; -}; - -static LIST_HEAD(i2c_client_drivers); -static DECLARE_MUTEX(i2c_client_driver_list_lock); - -/* Client drivers register here by their I2C driver ID */ -int wis_i2c_add_driver(unsigned int id, found_proc found_proc) -{ - struct wis_i2c_client_driver *driver; - - driver = kmalloc(sizeof(struct wis_i2c_client_driver), GFP_KERNEL); - if (driver == NULL) - return -ENOMEM; - driver->id = id; - driver->found_proc = found_proc; - - down(&i2c_client_driver_list_lock); - list_add_tail(&driver->list, &i2c_client_drivers); - up(&i2c_client_driver_list_lock); - - return 0; -} -EXPORT_SYMBOL(wis_i2c_add_driver); - -void wis_i2c_del_driver(found_proc found_proc) -{ - struct wis_i2c_client_driver *driver, *next; - - down(&i2c_client_driver_list_lock); - list_for_each_entry_safe(driver, next, &i2c_client_drivers, list) - if (driver->found_proc == found_proc) { - list_del(&driver->list); - kfree(driver); - } - up(&i2c_client_driver_list_lock); -} -EXPORT_SYMBOL(wis_i2c_del_driver); - -/* The main go7007 driver calls this to instantiate a client by driver - * ID and bus address, which are both stored in the board info table */ -int wis_i2c_probe_device(struct i2c_adapter *adapter, - unsigned int id, int addr) -{ - struct wis_i2c_client_driver *driver; - int found = 0; - - if (addr < 0 || addr > 0x7f) - return -1; - down(&i2c_client_driver_list_lock); - list_for_each_entry(driver, &i2c_client_drivers, list) - if (driver->id == id) { - if (driver->found_proc(adapter, addr, 0) == 0) - found = 1; - break; - } - up(&i2c_client_driver_list_lock); - return found; -} - /********************* Driver for on-board I2C adapter *********************/ /* #define GO7007_I2C_DEBUG */ @@ -287,9 +206,7 @@ static struct i2c_algorithm go7007_algo = { static struct i2c_adapter go7007_adap_templ = { .owner = THIS_MODULE, - .class = I2C_CLASS_TV_ANALOG, .name = "WIS GO7007SB", - .id = I2C_ALGO_GO7007, .algo = &go7007_algo, }; diff --git a/drivers/staging/go7007/go7007-priv.h b/drivers/staging/go7007/go7007-priv.h index 372f1f1..178d181 100644 --- a/drivers/staging/go7007/go7007-priv.h +++ b/drivers/staging/go7007/go7007-priv.h @@ -87,6 +87,7 @@ struct go7007_board_info { int audio_main_div; int num_i2c_devs; struct { + const char *type; int id; int addr; } i2c_devs[4]; diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c index 83eec92..aa4a9e0 100644 --- a/drivers/staging/go7007/go7007-usb.c +++ b/drivers/staging/go7007/go7007-usb.c @@ -91,6 +91,7 @@ static struct go7007_usb_board board_matrix_ii = { .num_i2c_devs = 1, .i2c_devs = { { + .type = "wis_saa7115", .id = I2C_DRIVERID_WIS_SAA7115, .addr = 0x20, }, @@ -127,6 +128,7 @@ static struct go7007_usb_board board_matrix_reload = { .num_i2c_devs = 1, .i2c_devs = { { + .type = "wis_saa7113", .id = I2C_DRIVERID_WIS_SAA7113, .addr = 0x25, }, @@ -164,6 +166,7 @@ static struct go7007_usb_board board_star_trek = { .num_i2c_devs = 1, .i2c_devs = { { + .type = "wis_saa7115", .id = I2C_DRIVERID_WIS_SAA7115, .addr = 0x20, }, @@ -209,14 +212,17 @@ static struct go7007_usb_board board_px_tv402u = { .num_i2c_devs = 3, .i2c_devs = { { + .type = "wis_saa7115", .id = I2C_DRIVERID_WIS_SAA7115, .addr = 0x20, }, { + .type = "wis_uda1342", .id = I2C_DRIVERID_WIS_UDA1342, .addr = 0x1a, }, { + .type = "wis_sony_tuner", .id = I2C_DRIVERID_WIS_SONY_TUNER, .addr = 0x60, }, @@ -264,6 +270,7 @@ static struct go7007_usb_board board_xmen = { .num_i2c_devs = 1, .i2c_devs = { { + .type = "wis_ov7640", .id = I2C_DRIVERID_WIS_OV7640, .addr = 0x21, }, @@ -296,6 +303,7 @@ static struct go7007_usb_board board_matrix_revolution = { .num_i2c_devs = 1, .i2c_devs = { { + .type = "wis_tw9903", .id = I2C_DRIVERID_WIS_TW9903, .addr = 0x44, }, @@ -385,6 +393,7 @@ static struct go7007_usb_board board_adlink_mpg24 = { .num_i2c_devs = 1, .i2c_devs = { { + .type = "wis_twTW2804", .id = I2C_DRIVERID_WIS_TW2804, .addr = 0x00, /* yes, really */ }, @@ -415,8 +424,9 @@ static struct go7007_usb_board board_sensoray_2250 = { .num_i2c_devs = 1, .i2c_devs = { { + .type = "s2250_board", .id = I2C_DRIVERID_S2250, - .addr = 0x34, + .addr = 0x43, }, }, .num_inputs = 2, @@ -943,9 +953,7 @@ static struct i2c_algorithm go7007_usb_algo = { static struct i2c_adapter go7007_usb_adap_templ = { .owner = THIS_MODULE, - .class = I2C_CLASS_TV_ANALOG, .name = "WIS GO7007SB EZ-USB", - .id = I2C_ALGO_GO7007_USB, .algo = &go7007_usb_algo, }; diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/go7007/s2250-board.c index d333ea2..1706fbf 100644 --- a/drivers/staging/go7007/s2250-board.c +++ b/drivers/staging/go7007/s2250-board.c @@ -28,7 +28,6 @@ extern int s2250loader_init(void); extern void s2250loader_cleanup(void); #define TLV320_ADDRESS 0x34 -#define S2250_VIDDEC 0x86 #define VPX322_ADDR_ANALOGCONTROL1 0x02 #define VPX322_ADDR_BRIGHTNESS0 0x0127 #define VPX322_ADDR_BRIGHTNESS1 0x0131 @@ -123,6 +122,7 @@ struct s2250 { int hue; int reg12b_val; int audio_input; + struct i2c_client *audio; }; /* from go7007-usb.c which is Copyright (C) 2005-2006 Micronas USA Inc.*/ @@ -452,16 +452,15 @@ static int s2250_command(struct i2c_client *client, { struct v4l2_audio *audio = arg; - client->addr = TLV320_ADDRESS; switch (audio->index) { case 0: - write_reg(client, 0x08, 0x02); /* Line In */ + write_reg(dec->audio, 0x08, 0x02); /* Line In */ break; case 1: - write_reg(client, 0x08, 0x04); /* Mic */ + write_reg(dec->audio, 0x08, 0x04); /* Mic */ break; case 2: - write_reg(client, 0x08, 0x05); /* Mic Boost */ + write_reg(dec->audio, 0x08, 0x05); /* Mic Boost */ break; default: return -EINVAL; @@ -477,31 +476,23 @@ static int s2250_command(struct i2c_client *client, return 0; } -static struct i2c_driver s2250_driver; - -static struct i2c_client s2250_client_templ = { - .name = "Sensoray 2250", - .driver = &s2250_driver, -}; - -static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind) +static int s2250_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_client *audio; + struct i2c_adapter *adapter = client->adapter; struct s2250 *dec; u8 *data; struct go7007 *go = i2c_get_adapdata(adapter); struct go7007_usb *usb = go->hpi_context; - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) + audio = i2c_new_dummy(adapter, TLV320_ADDRESS >> 1); + if (audio == NULL) return -ENOMEM; - memcpy(client, &s2250_client_templ, - sizeof(s2250_client_templ)); - client->adapter = adapter; dec = kmalloc(sizeof(struct s2250), GFP_KERNEL); if (dec == NULL) { - kfree(client); + i2c_unregister_device(audio); return -ENOMEM; } @@ -510,7 +501,7 @@ static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind) dec->contrast = 50; dec->saturation = 50; dec->hue = 0; - client->addr = TLV320_ADDRESS; + dec->audio = audio; i2c_set_clientdata(client, dec); printk(KERN_DEBUG @@ -518,28 +509,25 @@ static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind) adapter->name); /* initialize the audio */ - client->addr = TLV320_ADDRESS; - if (write_regs(client, aud_regs) < 0) { + if (write_regs(audio, aud_regs) < 0) { printk(KERN_ERR "s2250: error initializing audio\n"); - kfree(client); + i2c_unregister_device(audio); kfree(dec); return 0; } - client->addr = S2250_VIDDEC; - i2c_set_clientdata(client, dec); if (write_regs(client, vid_regs) < 0) { printk(KERN_ERR "s2250: error initializing decoder\n"); - kfree(client); + i2c_unregister_device(audio); kfree(dec); return 0; } if (write_regs_fp(client, vid_regs_fp) < 0) { printk(KERN_ERR "s2250: error initializing decoder\n"); - kfree(client); + i2c_unregister_device(audio); kfree(dec); return 0; } @@ -575,32 +563,33 @@ static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind) up(&usb->i2c_lock); } - i2c_attach_client(client); printk("s2250: initialized successfully\n"); return 0; } -static int s2250_detach(struct i2c_client *client) +static int s2250_remove(struct i2c_client *client) { struct s2250 *dec = i2c_get_clientdata(client); - int r; - - r = i2c_detach_client(client); - if (r < 0) - return r; - kfree(client); + i2c_set_clientdata(client, NULL); + i2c_unregister_device(dec->audio); kfree(dec); return 0; } +static struct i2c_device_id s2250_id[] = { + { "s2250_board", 0 }, + { } +}; + static struct i2c_driver s2250_driver = { .driver = { .name = "Sensoray 2250 board driver", }, - .id = I2C_DRIVERID_S2250, - .detach_client = s2250_detach, + .probe = s2250_probe, + .remove = s2250_remove, .command = s2250_command, + .id_table = s2250_id, }; static int __init s2250_init(void) @@ -613,13 +602,13 @@ static int __init s2250_init(void) r = i2c_add_driver(&s2250_driver); if (r < 0) - return r; - return wis_i2c_add_driver(s2250_driver.id, s2250_detect); + s2250loader_cleanup(); + + return r; } static void __exit s2250_cleanup(void) { - wis_i2c_del_driver(s2250_detect); i2c_del_driver(&s2250_driver); s2250loader_cleanup(); diff --git a/drivers/staging/go7007/wis-i2c.h b/drivers/staging/go7007/wis-i2c.h index 431f41d..3c2b9be 100644 --- a/drivers/staging/go7007/wis-i2c.h +++ b/drivers/staging/go7007/wis-i2c.h @@ -24,21 +24,12 @@ #define I2C_DRIVERID_WIS_OV7640 0xf0f5 #define I2C_DRIVERID_WIS_TW2804 0xf0f6 #define I2C_DRIVERID_S2250 0xf0f7 -#define I2C_ALGO_GO7007 0xf00000 -#define I2C_ALGO_GO7007_USB 0xf10000 /* Flag to indicate that the client needs to be accessed with SCCB semantics */ /* We re-use the I2C_M_TEN value so the flag passes through the masks in the * core I2C code. Major kludge, but the I2C layer ain't exactly flexible. */ #define I2C_CLIENT_SCCB 0x10 -typedef int (*found_proc) (struct i2c_adapter *, int, int); -int wis_i2c_add_driver(unsigned int id, found_proc found_proc); -void wis_i2c_del_driver(found_proc found_proc); - -int wis_i2c_probe_device(struct i2c_adapter *adapter, - unsigned int id, int addr); - /* Definitions for new video decoder commands */ struct video_decoder_resolution { diff --git a/drivers/staging/go7007/wis-ov7640.c b/drivers/staging/go7007/wis-ov7640.c index 2f9efca..04d6d3a 100644 --- a/drivers/staging/go7007/wis-ov7640.c +++ b/drivers/staging/go7007/wis-ov7640.c @@ -50,76 +50,54 @@ static int write_regs(struct i2c_client *client, u8 *regs) return 0; } -static struct i2c_driver wis_ov7640_driver; - -static struct i2c_client wis_ov7640_client_templ = { - .name = "OV7640 (WIS)", - .driver = &wis_ov7640_driver, -}; - -static int wis_ov7640_detect(struct i2c_adapter *adapter, int addr, int kind) +static int wis_ov7640_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; - - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &wis_ov7640_client_templ, - sizeof(wis_ov7640_client_templ)); - client->adapter = adapter; - client->addr = addr; + return -ENODEV; + client->flags = I2C_CLIENT_SCCB; printk(KERN_DEBUG "wis-ov7640: initializing OV7640 at address %d on %s\n", - addr, adapter->name); + client->addr, adapter->name); if (write_regs(client, initial_registers) < 0) { printk(KERN_ERR "wis-ov7640: error initializing OV7640\n"); - kfree(client); - return 0; + return -ENODEV; } - i2c_attach_client(client); return 0; } -static int wis_ov7640_detach(struct i2c_client *client) +static int wis_ov7640_remove(struct i2c_client *client) { - int r; - - r = i2c_detach_client(client); - if (r < 0) - return r; - - kfree(client); return 0; } +static struct i2c_device_id wis_ov7640_id[] = { + { "wis_ov7640", 0 }, + { } +}; + static struct i2c_driver wis_ov7640_driver = { .driver = { .name = "WIS OV7640 I2C driver", }, - .id = I2C_DRIVERID_WIS_OV7640, - .detach_client = wis_ov7640_detach, + .probe = wis_ov7640_probe, + .remove = wis_ov7640_remove, + .id_table = wis_ov7640_id, }; static int __init wis_ov7640_init(void) { - int r; - - r = i2c_add_driver(&wis_ov7640_driver); - if (r < 0) - return r; - return wis_i2c_add_driver(wis_ov7640_driver.id, wis_ov7640_detect); + return i2c_add_driver(&wis_ov7640_driver); } static void __exit wis_ov7640_cleanup(void) { - wis_i2c_del_driver(wis_ov7640_detect); i2c_del_driver(&wis_ov7640_driver); } diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/go7007/wis-saa7113.c index 1168972..9ab893b 100644 --- a/drivers/staging/go7007/wis-saa7113.c +++ b/drivers/staging/go7007/wis-saa7113.c @@ -261,34 +261,19 @@ static int wis_saa7113_command(struct i2c_client *client, return 0; } -static struct i2c_driver wis_saa7113_driver; - -static struct i2c_client wis_saa7113_client_templ = { - .name = "SAA7113 (WIS)", - .driver = &wis_saa7113_driver, -}; - -static int wis_saa7113_detect(struct i2c_adapter *adapter, int addr, int kind) +static int wis_saa7113_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; struct wis_saa7113 *dec; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; - - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &wis_saa7113_client_templ, - sizeof(wis_saa7113_client_templ)); - client->adapter = adapter; - client->addr = addr; + return -ENODEV; dec = kmalloc(sizeof(struct wis_saa7113), GFP_KERNEL); - if (dec == NULL) { - kfree(client); + if (dec == NULL) return -ENOMEM; - } + dec->norm = V4L2_STD_NTSC; dec->brightness = 128; dec->contrast = 71; @@ -298,56 +283,49 @@ static int wis_saa7113_detect(struct i2c_adapter *adapter, int addr, int kind) printk(KERN_DEBUG "wis-saa7113: initializing SAA7113 at address %d on %s\n", - addr, adapter->name); + client->addr, adapter->name); if (write_regs(client, initial_registers) < 0) { printk(KERN_ERR "wis-saa7113: error initializing SAA7113\n"); - kfree(client); kfree(dec); - return 0; + return -ENODEV; } - i2c_attach_client(client); return 0; } -static int wis_saa7113_detach(struct i2c_client *client) +static int wis_saa7113_remove(struct i2c_client *client) { struct wis_saa7113 *dec = i2c_get_clientdata(client); - int r; - - r = i2c_detach_client(client); - if (r < 0) - return r; - kfree(client); + i2c_set_clientdata(client, NULL); kfree(dec); return 0; } +static struct i2c_device_id wis_saa7113_id[] = { + { "wis_saa7113", 0 }, + { } +}; + static struct i2c_driver wis_saa7113_driver = { .driver = { .name = "WIS SAA7113 I2C driver", }, - .id = I2C_DRIVERID_WIS_SAA7113, - .detach_client = wis_saa7113_detach, + .probe = wis_saa7113_probe, + .remove = wis_saa7113_remove, .command = wis_saa7113_command, + .id_table = wis_saa7113_id, }; static int __init wis_saa7113_init(void) { - int r; - - r = i2c_add_driver(&wis_saa7113_driver); - if (r < 0) - return r; - return wis_i2c_add_driver(wis_saa7113_driver.id, wis_saa7113_detect); + return i2c_add_driver(&wis_saa7113_driver); } static void __exit wis_saa7113_cleanup(void) { - wis_i2c_del_driver(wis_saa7113_detect); i2c_del_driver(&wis_saa7113_driver); } diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/go7007/wis-saa7115.c index 59417a7..8687ad2 100644 --- a/drivers/staging/go7007/wis-saa7115.c +++ b/drivers/staging/go7007/wis-saa7115.c @@ -394,34 +394,19 @@ static int wis_saa7115_command(struct i2c_client *client, return 0; } -static struct i2c_driver wis_saa7115_driver; - -static struct i2c_client wis_saa7115_client_templ = { - .name = "SAA7115 (WIS)", - .driver = &wis_saa7115_driver, -}; - -static int wis_saa7115_detect(struct i2c_adapter *adapter, int addr, int kind) +static int wis_saa7115_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; struct wis_saa7115 *dec; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; - - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &wis_saa7115_client_templ, - sizeof(wis_saa7115_client_templ)); - client->adapter = adapter; - client->addr = addr; + return -ENODEV; dec = kmalloc(sizeof(struct wis_saa7115), GFP_KERNEL); - if (dec == NULL) { - kfree(client); + if (dec == NULL) return -ENOMEM; - } + dec->norm = V4L2_STD_NTSC; dec->brightness = 128; dec->contrast = 64; @@ -431,56 +416,49 @@ static int wis_saa7115_detect(struct i2c_adapter *adapter, int addr, int kind) printk(KERN_DEBUG "wis-saa7115: initializing SAA7115 at address %d on %s\n", - addr, adapter->name); + client->addr, adapter->name); if (write_regs(client, initial_registers) < 0) { printk(KERN_ERR "wis-saa7115: error initializing SAA7115\n"); - kfree(client); kfree(dec); - return 0; + return -ENODEV; } - i2c_attach_client(client); return 0; } -static int wis_saa7115_detach(struct i2c_client *client) +static int wis_saa7115_remove(struct i2c_client *client) { struct wis_saa7115 *dec = i2c_get_clientdata(client); - int r; - - r = i2c_detach_client(client); - if (r < 0) - return r; - kfree(client); + i2c_set_clientdata(client, NULL); kfree(dec); return 0; } +static struct i2c_device_id wis_saa7115_id[] = { + { "wis_saa7115", 0 }, + { } +}; + static struct i2c_driver wis_saa7115_driver = { .driver = { .name = "WIS SAA7115 I2C driver", }, - .id = I2C_DRIVERID_WIS_SAA7115, - .detach_client = wis_saa7115_detach, + .probe = wis_saa7115_probe, + .remove = wis_saa7115_remove, .command = wis_saa7115_command, + .id_table = wis_saa7115_id, }; static int __init wis_saa7115_init(void) { - int r; - - r = i2c_add_driver(&wis_saa7115_driver); - if (r < 0) - return r; - return wis_i2c_add_driver(wis_saa7115_driver.id, wis_saa7115_detect); + return i2c_add_driver(&wis_saa7115_driver); } static void __exit wis_saa7115_cleanup(void) { - wis_i2c_del_driver(wis_saa7115_detect); i2c_del_driver(&wis_saa7115_driver); } diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c index 0a7eeef..c965c60 100644 --- a/drivers/staging/go7007/wis-sony-tuner.c +++ b/drivers/staging/go7007/wis-sony-tuner.c @@ -653,35 +653,19 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } -static struct i2c_driver wis_sony_tuner_driver; - -static struct i2c_client wis_sony_tuner_client_templ = { - .name = "Sony TV Tuner (WIS)", - .driver = &wis_sony_tuner_driver, -}; - -static int wis_sony_tuner_detect(struct i2c_adapter *adapter, - int addr, int kind) +static int wis_sony_tuner_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; struct wis_sony_tuner *t; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) - return 0; - - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &wis_sony_tuner_client_templ, - sizeof(wis_sony_tuner_client_templ)); - client->adapter = adapter; - client->addr = addr; + return -ENODEV; t = kmalloc(sizeof(struct wis_sony_tuner), GFP_KERNEL); - if (t == NULL) { - kfree(client); + if (t == NULL) return -ENOMEM; - } + t->type = -1; t->freq = 0; t->mpxmode = 0; @@ -690,50 +674,42 @@ static int wis_sony_tuner_detect(struct i2c_adapter *adapter, printk(KERN_DEBUG "wis-sony-tuner: initializing tuner at address %d on %s\n", - addr, adapter->name); - - i2c_attach_client(client); + client->addr, adapter->name); return 0; } -static int wis_sony_tuner_detach(struct i2c_client *client) +static int wis_sony_tuner_remove(struct i2c_client *client) { struct wis_sony_tuner *t = i2c_get_clientdata(client); - int r; - - r = i2c_detach_client(client); - if (r < 0) - return r; + i2c_set_clientdata(client, NULL); kfree(t); - kfree(client); return 0; } +static struct i2c_device_id wis_sony_tuner_id[] = { + { "wis_sony_tuner", 0 }, + { } +}; + static struct i2c_driver wis_sony_tuner_driver = { .driver = { .name = "WIS Sony TV Tuner I2C driver", }, - .id = I2C_DRIVERID_WIS_SONY_TUNER, - .detach_client = wis_sony_tuner_detach, + .probe = wis_sony_tuner_probe, + .remove = wis_sony_tuner_remove, .command = tuner_command, + .id_table = wis_sony_tuner_id, }; static int __init wis_sony_tuner_init(void) { - int r; - - r = i2c_add_driver(&wis_sony_tuner_driver); - if (r < 0) - return r; - return wis_i2c_add_driver(wis_sony_tuner_driver.id, - wis_sony_tuner_detect); + return i2c_add_driver(&wis_sony_tuner_driver); } static void __exit wis_sony_tuner_cleanup(void) { - wis_i2c_del_driver(wis_sony_tuner_detect); i2c_del_driver(&wis_sony_tuner_driver); } diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/go7007/wis-tw2804.c index 57b8f2b..e15794a 100644 --- a/drivers/staging/go7007/wis-tw2804.c +++ b/drivers/staging/go7007/wis-tw2804.c @@ -291,34 +291,19 @@ static int wis_tw2804_command(struct i2c_client *client, return 0; } -static struct i2c_driver wis_tw2804_driver; - -static struct i2c_client wis_tw2804_client_templ = { - .name = "TW2804 (WIS)", - .driver = &wis_tw2804_driver, -}; - -static int wis_tw2804_detect(struct i2c_adapter *adapter, int addr, int kind) +static int wis_tw2804_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; struct wis_tw2804 *dec; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; - - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &wis_tw2804_client_templ, - sizeof(wis_tw2804_client_templ)); - client->adapter = adapter; - client->addr = addr; + return -ENODEV; dec = kmalloc(sizeof(struct wis_tw2804), GFP_KERNEL); - if (dec == NULL) { - kfree(client); + if (dec == NULL) return -ENOMEM; - } + dec->channel = -1; dec->norm = V4L2_STD_NTSC; dec->brightness = 128; @@ -328,48 +313,42 @@ static int wis_tw2804_detect(struct i2c_adapter *adapter, int addr, int kind) i2c_set_clientdata(client, dec); printk(KERN_DEBUG "wis-tw2804: creating TW2804 at address %d on %s\n", - addr, adapter->name); + client->addr, adapter->name); - i2c_attach_client(client); return 0; } -static int wis_tw2804_detach(struct i2c_client *client) +static int wis_tw2804_remove(struct i2c_client *client) { struct wis_tw2804 *dec = i2c_get_clientdata(client); - int r; - - r = i2c_detach_client(client); - if (r < 0) - return r; - kfree(client); + i2c_set_clientdata(client, NULL); kfree(dec); return 0; } +static struct i2c_device_id wis_tw2804_id[] = { + { "wis_tw2804", 0 }, + { } +}; + static struct i2c_driver wis_tw2804_driver = { .driver = { .name = "WIS TW2804 I2C driver", }, - .id = I2C_DRIVERID_WIS_TW2804, - .detach_client = wis_tw2804_detach, + .probe = wis_tw2804_probe, + .remove = wis_tw2804_remove, .command = wis_tw2804_command, + .id_table = wis_tw2804_id, }; static int __init wis_tw2804_init(void) { - int r; - - r = i2c_add_driver(&wis_tw2804_driver); - if (r < 0) - return r; - return wis_i2c_add_driver(wis_tw2804_driver.id, wis_tw2804_detect); + return i2c_add_driver(&wis_tw2804_driver); } static void __exit wis_tw2804_cleanup(void) { - wis_i2c_del_driver(wis_tw2804_detect); i2c_del_driver(&wis_tw2804_driver); } diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/go7007/wis-tw9903.c index 40627b2..6c3427b 100644 --- a/drivers/staging/go7007/wis-tw9903.c +++ b/drivers/staging/go7007/wis-tw9903.c @@ -267,34 +267,19 @@ static int wis_tw9903_command(struct i2c_client *client, return 0; } -static struct i2c_driver wis_tw9903_driver; - -static struct i2c_client wis_tw9903_client_templ = { - .name = "TW9903 (WIS)", - .driver = &wis_tw9903_driver, -}; - -static int wis_tw9903_detect(struct i2c_adapter *adapter, int addr, int kind) +static int wis_tw9903_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; struct wis_tw9903 *dec; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; - - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &wis_tw9903_client_templ, - sizeof(wis_tw9903_client_templ)); - client->adapter = adapter; - client->addr = addr; + return -ENODEV; dec = kmalloc(sizeof(struct wis_tw9903), GFP_KERNEL); - if (dec == NULL) { - kfree(client); + if (dec == NULL) return -ENOMEM; - } + dec->norm = V4L2_STD_NTSC; dec->brightness = 0; dec->contrast = 0x60; @@ -303,55 +288,48 @@ static int wis_tw9903_detect(struct i2c_adapter *adapter, int addr, int kind) printk(KERN_DEBUG "wis-tw9903: initializing TW9903 at address %d on %s\n", - addr, adapter->name); + client->addr, adapter->name); if (write_regs(client, initial_registers) < 0) { printk(KERN_ERR "wis-tw9903: error initializing TW9903\n"); - kfree(client); kfree(dec); - return 0; + return -ENODEV; } - i2c_attach_client(client); return 0; } -static int wis_tw9903_detach(struct i2c_client *client) +static int wis_tw9903_remove(struct i2c_client *client) { struct wis_tw9903 *dec = i2c_get_clientdata(client); - int r; - - r = i2c_detach_client(client); - if (r < 0) - return r; - kfree(client); + i2c_set_clientdata(client, NULL); kfree(dec); return 0; } +static struct i2c_device_id wis_tw9903_id[] = { + { "wis_tw9903", 0 }, + { } +}; + static struct i2c_driver wis_tw9903_driver = { .driver = { .name = "WIS TW9903 I2C driver", }, - .id = I2C_DRIVERID_WIS_TW9903, - .detach_client = wis_tw9903_detach, + .probe = wis_tw9903_probe, + .remove = wis_tw9903_remove, .command = wis_tw9903_command, + .id_table = wis_tw9903_id, }; static int __init wis_tw9903_init(void) { - int r; - - r = i2c_add_driver(&wis_tw9903_driver); - if (r < 0) - return r; - return wis_i2c_add_driver(wis_tw9903_driver.id, wis_tw9903_detect); + return i2c_add_driver(&wis_tw9903_driver); } static void __exit wis_tw9903_cleanup(void) { - wis_i2c_del_driver(wis_tw9903_detect); i2c_del_driver(&wis_tw9903_driver); } diff --git a/drivers/staging/go7007/wis-uda1342.c b/drivers/staging/go7007/wis-uda1342.c index 555645c..739c7ae 100644 --- a/drivers/staging/go7007/wis-uda1342.c +++ b/drivers/staging/go7007/wis-uda1342.c @@ -59,73 +59,51 @@ static int wis_uda1342_command(struct i2c_client *client, return 0; } -static struct i2c_driver wis_uda1342_driver; - -static struct i2c_client wis_uda1342_client_templ = { - .name = "UDA1342 (WIS)", - .driver = &wis_uda1342_driver, -}; - -static int wis_uda1342_detect(struct i2c_adapter *adapter, int addr, int kind) +static int wis_uda1342_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return 0; - - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &wis_uda1342_client_templ, - sizeof(wis_uda1342_client_templ)); - client->adapter = adapter; - client->addr = addr; + return -ENODEV; printk(KERN_DEBUG "wis-uda1342: initializing UDA1342 at address %d on %s\n", - addr, adapter->name); + client->addr, adapter->name); write_reg(client, 0x00, 0x8000); /* reset registers */ write_reg(client, 0x00, 0x1241); /* select input 1 */ - i2c_attach_client(client); return 0; } -static int wis_uda1342_detach(struct i2c_client *client) +static int wis_uda1342_remove(struct i2c_client *client) { - int r; - - r = i2c_detach_client(client); - if (r < 0) - return r; - - kfree(client); return 0; } +static struct i2c_device_id wis_uda1342_id[] = { + { "wis_uda1342", 0 }, + { } +}; + static struct i2c_driver wis_uda1342_driver = { .driver = { .name = "WIS UDA1342 I2C driver", }, - .id = I2C_DRIVERID_WIS_UDA1342, - .detach_client = wis_uda1342_detach, + .probe = wis_uda1342_probe, + .remove = wis_uda1342_remove, .command = wis_uda1342_command, + .id_table = wis_uda1342_id, }; static int __init wis_uda1342_init(void) { - int r; - - r = i2c_add_driver(&wis_uda1342_driver); - if (r < 0) - return r; - return wis_i2c_add_driver(wis_uda1342_driver.id, wis_uda1342_detect); + return i2c_add_driver(&wis_uda1342_driver); } static void __exit wis_uda1342_cleanup(void) { - wis_i2c_del_driver(wis_uda1342_detect); i2c_del_driver(&wis_uda1342_driver); } -- cgit v0.10.2 From 3c48f23adada870db612a0dd3488605c4af5c0a5 Mon Sep 17 00:00:00 2001 From: Subrata Modak Date: Sun, 19 Apr 2009 01:10:03 +0530 Subject: configfs: Fix Trivial Warning in fs/configfs/symlink.c I observed the following build warning with fs/configfs/symlink.c: fs/configfs/symlink.c: In function 'configfs_symlink': fs/configfs/symlink.c:138: warning: 'target_item' may be used uninitialized in this function Here is a small fix for this. Cc: Patrick Mochel Cc: Balbir Singh Cc: Sachin P Sant Signed-Off-By: Subrata Modak Signed-off-by: Joel Becker diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index 932a92b..c8afa6b 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -135,7 +135,7 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna struct path path; struct configfs_dirent *sd; struct config_item *parent_item; - struct config_item *target_item; + struct config_item *target_item = NULL; struct config_item_type *type; ret = -EPERM; /* What lack-of-symlink returns */ -- cgit v0.10.2 From 0dbbbf1a0e305ad900b733e2ba1cac304d31696e Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 18 Apr 2009 21:48:52 +0400 Subject: fsl_rio: Pass the proper device to dma mapping routines The driver should pass a device that specifies internal DMA ops, but currently NULL pointer is passed, therefore following bug appears during boot up: ------------[ cut here ]------------ Kernel BUG at c0018a7c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] [...] NIP [c0018a7c] fsl_rio_doorbell_init+0x34/0x60 LR [c0018a70] fsl_rio_doorbell_init+0x28/0x60 Call Trace: [ef82bda0] [c0018a70] fsl_rio_doorbell_init+0x28/0x60 (unreliable) [ef82bdc0] [c0019160] fsl_rio_setup+0x6b8/0x84c [ef82be20] [c02d28ac] fsl_of_rio_rpn_probe+0x30/0x50 [ef82be40] [c0234f20] of_platform_device_probe+0x5c/0x84 [...] ---[ end trace 561bb236c800851f ]--- This patch fixes the issue. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index a0fa4eb..abdb124 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -159,6 +160,7 @@ struct rio_msg_rx_ring { }; struct rio_priv { + struct device *dev; void __iomem *regs_win; struct rio_atmu_regs __iomem *atmu_regs; struct rio_atmu_regs __iomem *maint_atmu_regs; @@ -484,13 +486,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr for (i = 0; i < priv->msg_tx_ring.size; i++) { priv->msg_tx_ring.virt_buffer[i] = - dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL); if (!priv->msg_tx_ring.virt_buffer[i]) { rc = -ENOMEM; for (j = 0; j < priv->msg_tx_ring.size; j++) if (priv->msg_tx_ring.virt_buffer[j]) - dma_free_coherent(NULL, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring. virt_buffer[j], @@ -501,7 +503,7 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr } /* Initialize outbound message descriptor ring */ - priv->msg_tx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, &priv->msg_tx_ring.phys, GFP_KERNEL); if (!priv->msg_tx_ring.virt) { @@ -549,12 +551,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr return rc; out_irq: - dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + dma_free_coherent(priv->dev, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); out_dma: for (i = 0; i < priv->msg_tx_ring.size; i++) - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring.virt_buffer[i], priv->msg_tx_ring.phys_buffer[i]); @@ -576,7 +579,8 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox) out_be32(&priv->msg_regs->omr, 0); /* Free ring */ - dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + dma_free_coherent(priv->dev, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); /* Free interrupt */ @@ -654,7 +658,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri priv->msg_rx_ring.virt_buffer[i] = NULL; /* Initialize inbound message ring */ - priv->msg_rx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, &priv->msg_rx_ring.phys, GFP_KERNEL); if (!priv->msg_rx_ring.virt) { @@ -673,7 +677,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0, "msg_rx", (void *)mport); if (rc < 0) { - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring.virt_buffer[i], priv->msg_tx_ring.phys_buffer[i]); goto out; @@ -713,7 +717,7 @@ void rio_close_inb_mbox(struct rio_mport *mport, int mbox) out_be32(&priv->msg_regs->imr, 0); /* Free ring */ - dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, + dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, priv->msg_rx_ring.virt, priv->msg_rx_ring.phys); /* Free interrupt */ @@ -890,7 +894,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) } /* Initialize inbound doorbells */ - priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 * + priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL); if (!priv->dbell_ring.virt) { printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); @@ -911,7 +915,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) "dbell_rx", (void *)mport); if (rc < 0) { iounmap(priv->dbell_win); - dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, + dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE, priv->dbell_ring.virt, priv->dbell_ring.phys); printk(KERN_ERR "MPC85xx RIO: unable to request inbound doorbell irq"); @@ -1087,6 +1091,8 @@ int fsl_rio_setup(struct of_device *dev) rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); strcpy(port->name, "RIO0 mport"); + priv->dev = &dev->dev; + port->ops = ops; port->host_deviceid = fsl_rio_get_hdid(port->id); -- cgit v0.10.2 From 595e23f390b675a5a264af48a42eda81413f2598 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 20 Apr 2009 10:54:35 -0500 Subject: powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD The ULI 1575 PCI quirk function for the Freescale MPC8610 HPCD was disabling the SATA INTx interrupt, even when SATA support was enabled. This was safe, because the SATA driver re-enabled it. But with commit a5bfc471 ("ahci: drop intx manipulation on msi enable"), the driver no longer does this, and so SATA support on the 8610 HPCD is broken. The original quirk function disabled INTx because it caused some other interrupt problem during early development on this board, but no one remembers any more what that problem was, and it doesn't seem to occur any more. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index 1db6b9e..65a35f3 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -275,11 +275,6 @@ static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev) if (!machine_is(mpc86xx_hpcd)) return; - /* Interrupt Disable, Needed when SATA disabled */ - pci_read_config_word(dev, PCI_COMMAND, &temp); - temp |= 1<<10; - pci_write_config_word(dev, PCI_COMMAND, temp); - pci_read_config_byte(dev, 0x83, &c); c |= 0x80; pci_write_config_byte(dev, 0x83, c); -- cgit v0.10.2 From 44aa417910ec9cda6da42be914105e789273b507 Mon Sep 17 00:00:00 2001 From: Vlada Peric Date: Tue, 21 Apr 2009 12:23:59 -0700 Subject: asiliantfb: add missing return statement Commit 032220ba (asiliantfb: fix cmap memory leaks) changed the function init_asiliant from void to int, resulting in the following compile warning: drivers/video/asiliantfb.c: In function `init_asiliant': drivers/video/asiliantfb.c:536: warning: control reaches end of non-void function Fix the warning by returning 0. Signed-off-by: Vlada Peric Cc: Andres Salomon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c index 1a1f946..9fe90ce 100644 --- a/drivers/video/asiliantfb.c +++ b/drivers/video/asiliantfb.c @@ -533,6 +533,7 @@ static int __devinit init_asiliant(struct fb_info *p, unsigned long addr) writeb(0xff, mmio_base + 0x78c); chips_hw_init(p); + return 0; } static int __devinit -- cgit v0.10.2 From ff14ed5db6e7e5e5dc23712d3c877891d4d9a1a8 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Tue, 21 Apr 2009 12:23:59 -0700 Subject: pxafb: lcsr1 is unused without CONFIG_FB_PXA_OVERLAY Fixes the warning: drivers/video/pxafb.c: In function 'pxafb_handle_irq': drivers/video/pxafb.c:1442: warning: unused variable 'lcsr1' [akpm@linux-foundation.org: save an ifdef] Signed-off-by: Denis V. Lunev Cc: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 84f63205..0889d50 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1439,7 +1439,7 @@ static void pxafb_disable_controller(struct pxafb_info *fbi) static irqreturn_t pxafb_handle_irq(int irq, void *dev_id) { struct pxafb_info *fbi = dev_id; - unsigned int lccr0, lcsr, lcsr1; + unsigned int lccr0, lcsr; lcsr = lcd_readl(fbi, LCSR); if (lcsr & LCSR_LDD) { @@ -1455,14 +1455,16 @@ static irqreturn_t pxafb_handle_irq(int irq, void *dev_id) lcd_writel(fbi, LCSR, lcsr); #ifdef CONFIG_FB_PXA_OVERLAY - lcsr1 = lcd_readl(fbi, LCSR1); - if (lcsr1 & LCSR1_BS(1)) - complete(&fbi->overlay[0].branch_done); + { + unsigned int lcsr1 = lcd_readl(fbi, LCSR1); + if (lcsr1 & LCSR1_BS(1)) + complete(&fbi->overlay[0].branch_done); - if (lcsr1 & LCSR1_BS(2)) - complete(&fbi->overlay[1].branch_done); + if (lcsr1 & LCSR1_BS(2)) + complete(&fbi->overlay[1].branch_done); - lcd_writel(fbi, LCSR1, lcsr1); + lcd_writel(fbi, LCSR1, lcsr1); + } #endif return IRQ_HANDLED; } -- cgit v0.10.2 From 8e19608e8b5c001e4a66ce482edc474f05fb7355 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 21 Apr 2009 12:24:00 -0700 Subject: clocksource: pass clocksource to read() callback Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm Acked-by: John Stultz Cc: Thomas Gleixner Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 1ff1bda..309f351 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -85,7 +85,7 @@ static struct irqaction at91rm9200_timer_irq = { .handler = at91rm9200_timer_interrupt }; -static cycle_t read_clk32k(void) +static cycle_t read_clk32k(struct clocksource *cs) { return read_CRTR(); } diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index b63e1d5..4bd56ae 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -31,7 +31,7 @@ static u32 pit_cnt; /* access only w/system irq blocked */ * Clocksource: just a monotonic counter of MCK/16 cycles. * We don't care whether or not PIT irqs are enabled. */ -static cycle_t read_pit_clk(void) +static cycle_t read_pit_clk(struct clocksource *cs) { unsigned long flags; u32 elapsed; diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index f8bcd29..6c227d4 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -238,7 +238,7 @@ static void __init timer_init(void) /* * clocksource */ -static cycle_t read_cycles(void) +static cycle_t read_cycles(struct clocksource *cs) { struct timer_s *t = &timers[TID_CLOCKSOURCE]; diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index aff0ebc..5aef18b 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -73,7 +73,7 @@ static void __init imx_timer_hardware_init(void) IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN; } -cycle_t imx_get_cycles(void) +cycle_t imx_get_cycles(struct clocksource *cs) { return IMX_TCN(TIMER_BASE); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index f4656d2..1e93dfe 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -401,7 +401,7 @@ void __init ixp4xx_sys_init(void) /* * clocksource */ -cycle_t ixp4xx_get_cycles(void) +cycle_t ixp4xx_get_cycles(struct clocksource *cs) { return *IXP4XX_OSTS; } diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 444d9c0..4855b8c 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -57,12 +57,12 @@ static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static cycle_t msm_gpt_read(void) +static cycle_t msm_gpt_read(struct clocksource *cs) { return readl(MSM_GPT_BASE + TIMER_COUNT_VAL); } -static cycle_t msm_dgt_read(void) +static cycle_t msm_dgt_read(struct clocksource *cs) { return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT; } diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index f201fdd..82801db 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -104,7 +104,7 @@ static struct irqaction netx_timer_irq = { .handler = netx_timer_interrupt, }; -cycle_t netx_get_cycles(void) +cycle_t netx_get_cycles(struct clocksource *cs) { return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE)); } diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c index 41df697..7728126 100644 --- a/arch/arm/mach-ns9xxx/time-ns9360.c +++ b/arch/arm/mach-ns9xxx/time-ns9360.c @@ -25,7 +25,7 @@ #define TIMER_CLOCKEVENT 1 static u32 latch; -static cycle_t ns9360_clocksource_read(void) +static cycle_t ns9360_clocksource_read(struct clocksource *cs) { return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE)); } diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 495a32c..4d56408 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -198,7 +198,7 @@ static struct irqaction omap_mpu_timer2_irq = { .handler = omap_mpu_timer2_interrupt, }; -static cycle_t mpu_read(void) +static cycle_t mpu_read(struct clocksource *cs) { return ~omap_mpu_timer_read(1); } diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 9fc13a2..1cb2c09 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -138,7 +138,7 @@ static inline void __init omap2_gp_clocksource_init(void) {} * clocksource */ static struct omap_dm_timer *gpt_clocksource; -static cycle_t clocksource_read_cycles(void) +static cycle_t clocksource_read_cycles(struct clocksource *cs) { return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource); } diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 8eb3830..750c448 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -125,7 +125,7 @@ static struct clock_event_device ckevt_pxa_osmr0 = { .set_mode = pxa_osmr0_set_mode, }; -static cycle_t pxa_read_oscr(void) +static cycle_t pxa_read_oscr(struct clocksource *cs) { return OSCR; } diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 9ab947c..942e1a7 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -715,7 +715,7 @@ static struct irqaction realview_timer_irq = { .handler = realview_timer_interrupt, }; -static cycle_t realview_get_cycles(void) +static cycle_t realview_get_cycles(struct clocksource *cs) { return ~readl(timer3_va_base + TIMER_VALUE); } diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 5657766..1f929c3 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -948,7 +948,7 @@ static struct irqaction versatile_timer_irq = { .handler = versatile_timer_interrupt, }; -static cycle_t versatile_get_cycles(void) +static cycle_t versatile_get_cycles(struct clocksource *cs) { return ~readl(TIMER3_VA_BASE + TIMER_VALUE); } diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index ef1b3cd..dab3357 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -36,7 +36,7 @@ static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; /* clock source */ -static cycle_t mxc_get_cycles(void) +static cycle_t mxc_get_cycles(struct clocksource *cs) { return __raw_readl(TIMER_BASE + MXC_TCN); } diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index d179714..433021f 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -185,7 +185,7 @@ console_initcall(omap_add_serial_console); #include -static cycle_t omap_32k_read(void) +static cycle_t omap_32k_read(struct clocksource *cs) { return omap_readl(TIMER_32K_SYNCHRONIZED); } @@ -207,7 +207,7 @@ unsigned long long sched_clock(void) { unsigned long long ret; - ret = (unsigned long long)omap_32k_read(); + ret = (unsigned long long)omap_32k_read(&clocksource_32k); ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; return ret; } diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 6fa2923..2faf9db 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -41,7 +41,7 @@ static u32 ticks_per_jiffy; /* * Clocksource handling. */ -static cycle_t orion_clksrc_read(void) +static cycle_t orion_clksrc_read(struct clocksource *cs) { return 0xffffffff - readl(TIMER0_VAL); } diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 0ff46bf..f27aa3b 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -18,7 +18,7 @@ #include -static cycle_t read_cycle_count(void) +static cycle_t read_cycle_count(struct clocksource *cs) { return (cycle_t)sysreg_read(COUNT); } diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 0ed2bad..2764612 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -58,16 +58,11 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc) return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; } -static cycle_t read_cycles(void) +static cycle_t read_cycles(struct clocksource *cs) { return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod); } -unsigned long long sched_clock(void) -{ - return cycles_2_ns(read_cycles()); -} - static struct clocksource clocksource_bfin = { .name = "bfin_cycles", .rating = 350, @@ -77,6 +72,11 @@ static struct clocksource clocksource_bfin = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +unsigned long long sched_clock(void) +{ + return cycles_2_ns(read_cycles(&clocksource_bfin)); +} + static int __init bfin_clocksource_init(void) { set_cyc2ns_scale(get_cclk() / 1000); diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c index 790ef0d8..71e3586 100644 --- a/arch/ia64/kernel/cyclone.c +++ b/arch/ia64/kernel/cyclone.c @@ -21,7 +21,7 @@ void __init cyclone_setup(void) static void __iomem *cyclone_mc; -static cycle_t read_cyclone(void) +static cycle_t read_cyclone(struct clocksource *cs) { return (cycle_t)readq((void __iomem *)cyclone_mc); } diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 641c8b6..604c1a3 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -33,7 +33,7 @@ #include "fsyscall_gtod_data.h" -static cycle_t itc_get_cycles(void); +static cycle_t itc_get_cycles(struct clocksource *cs); struct fsyscall_gtod_data_t fsyscall_gtod_data = { .lock = SEQLOCK_UNLOCKED, @@ -383,7 +383,7 @@ ia64_init_itm (void) } } -static cycle_t itc_get_cycles(void) +static cycle_t itc_get_cycles(struct clocksource *cs) { u64 lcycle, now, ret; diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c index cf67fc5..21d6f09 100644 --- a/arch/ia64/sn/kernel/sn2/timer.c +++ b/arch/ia64/sn/kernel/sn2/timer.c @@ -23,7 +23,7 @@ extern unsigned long sn_rtc_cycles_per_second; -static cycle_t read_sn2(void) +static cycle_t read_sn2(struct clocksource *cs) { return (cycle_t)readq(RTC_COUNTER_ADDR); } diff --git a/arch/m68knommu/platform/68328/timers.c b/arch/m68knommu/platform/68328/timers.c index 6bafefa..309f725 100644 --- a/arch/m68knommu/platform/68328/timers.c +++ b/arch/m68knommu/platform/68328/timers.c @@ -75,7 +75,7 @@ static struct irqaction m68328_timer_irq = { /***************************************************************************/ -static cycle_t m68328_read_clk(void) +static cycle_t m68328_read_clk(struct clocksource *cs) { unsigned long flags; u32 cycles; diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c index 772578b..a5f5628 100644 --- a/arch/m68knommu/platform/coldfire/dma_timer.c +++ b/arch/m68knommu/platform/coldfire/dma_timer.c @@ -34,7 +34,7 @@ #define DMA_DTMR_CLK_DIV_16 (2 << 1) #define DMA_DTMR_ENABLE (1 << 0) -static cycle_t cf_dt_get_cycles(void) +static cycle_t cf_dt_get_cycles(struct clocksource *cs) { return __raw_readl(DTCN0); } diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c index 2a12e7f..61b9621 100644 --- a/arch/m68knommu/platform/coldfire/pit.c +++ b/arch/m68knommu/platform/coldfire/pit.c @@ -125,7 +125,7 @@ static struct irqaction pit_irq = { /***************************************************************************/ -static cycle_t pit_read_clk(void) +static cycle_t pit_read_clk(struct clocksource *cs) { unsigned long flags; u32 cycles; diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c index 454f254..1ba8a37 100644 --- a/arch/m68knommu/platform/coldfire/timers.c +++ b/arch/m68knommu/platform/coldfire/timers.c @@ -78,7 +78,7 @@ static struct irqaction mcftmr_timer_irq = { /***************************************************************************/ -static cycle_t mcftmr_read_clk(void) +static cycle_t mcftmr_read_clk(struct clocksource *cs) { unsigned long flags; u32 cycles; diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index eccf7d6..2e911e3 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -22,7 +22,7 @@ static struct txx9_tmr_reg __iomem *txx9_cs_tmrptr; -static cycle_t txx9_cs_read(void) +static cycle_t txx9_cs_read(struct clocksource *cs) { return __raw_readl(&txx9_cs_tmrptr->trr); } diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c index 868745e..51489f8 100644 --- a/arch/mips/kernel/csrc-bcm1480.c +++ b/arch/mips/kernel/csrc-bcm1480.c @@ -28,7 +28,7 @@ #include -static cycle_t bcm1480_hpt_read(void) +static cycle_t bcm1480_hpt_read(struct clocksource *cs) { return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT)); } diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c index 1d5f63c..b551f48 100644 --- a/arch/mips/kernel/csrc-ioasic.c +++ b/arch/mips/kernel/csrc-ioasic.c @@ -25,7 +25,7 @@ #include #include -static cycle_t dec_ioasic_hpt_read(void) +static cycle_t dec_ioasic_hpt_read(struct clocksource *cs) { return ioasic_read(IO_REG_FCTR); } @@ -47,13 +47,13 @@ void __init dec_ioasic_clocksource_init(void) while (!ds1287_timer_state()) ; - start = dec_ioasic_hpt_read(); + start = dec_ioasic_hpt_read(&clocksource_dec); while (i--) while (!ds1287_timer_state()) ; - end = dec_ioasic_hpt_read(); + end = dec_ioasic_hpt_read(&clocksource_dec); freq = (end - start) * 10; printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq); diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c index f1a2893..e95a3cd 100644 --- a/arch/mips/kernel/csrc-r4k.c +++ b/arch/mips/kernel/csrc-r4k.c @@ -10,7 +10,7 @@ #include -static cycle_t c0_hpt_read(void) +static cycle_t c0_hpt_read(struct clocksource *cs) { return read_c0_count(); } diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c index 92212bb..d14d3d1 100644 --- a/arch/mips/kernel/csrc-sb1250.c +++ b/arch/mips/kernel/csrc-sb1250.c @@ -33,7 +33,7 @@ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over * again. */ -static cycle_t sb1250_hpt_read(void) +static cycle_t sb1250_hpt_read(struct clocksource *cs) { unsigned int count; diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 689719e..ed20e7f 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -128,7 +128,7 @@ void __init setup_pit_timer(void) * to just read by itself. So use jiffies to emulate a free * running counter: */ -static cycle_t pit_read(void) +static cycle_t pit_read(struct clocksource *cs) { unsigned long flags; int count; diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c index cf293b2..8df43e9 100644 --- a/arch/mips/nxp/pnx8550/common/time.c +++ b/arch/mips/nxp/pnx8550/common/time.c @@ -35,7 +35,7 @@ static unsigned long cpj; -static cycle_t hpt_read(void) +static cycle_t hpt_read(struct clocksource *cs) { return read_c0_count2(); } diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index f024057..f10a7cd 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -159,7 +159,7 @@ static void __init hub_rt_clock_event_global_init(void) setup_irq(irq, &hub_rt_irqaction); } -static cycle_t hub_rt_read(void) +static cycle_t hub_rt_read(struct clocksource *cs) { return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT); } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 926ea86..48571ac 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -77,7 +77,7 @@ #include #include -static cycle_t rtc_read(void); +static cycle_t rtc_read(struct clocksource *); static struct clocksource clocksource_rtc = { .name = "rtc", .rating = 400, @@ -88,7 +88,7 @@ static struct clocksource clocksource_rtc = { .read = rtc_read, }; -static cycle_t timebase_read(void); +static cycle_t timebase_read(struct clocksource *); static struct clocksource clocksource_timebase = { .name = "timebase", .rating = 400, @@ -766,12 +766,12 @@ unsigned long read_persistent_clock(void) } /* clocksource code */ -static cycle_t rtc_read(void) +static cycle_t rtc_read(struct clocksource *cs) { return (cycle_t)get_rtc(); } -static cycle_t timebase_read(void) +static cycle_t timebase_read(struct clocksource *cs) { return (cycle_t)get_tb(); } diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 6ded50d..ef596d0 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -201,7 +201,7 @@ unsigned long read_persistent_clock(void) return ts.tv_sec; } -static cycle_t read_tod_clock(void) +static cycle_t read_tod_clock(struct clocksource *cs) { return get_clock(); } diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index c34e1e0..1700d24 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -208,7 +208,7 @@ unsigned long long sched_clock(void) if (!clocksource_sh.rating) return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); - cycles = clocksource_sh.read(); + cycles = clocksource_sh.read(&clocksource_sh); return cyc2ns(&clocksource_sh, cycles); } #endif diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index c5d3396..fe8d893 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -81,7 +81,7 @@ static int tmu_timer_stop(void) */ static int tmus_are_scaled; -static cycle_t tmu_timer_read(void) +static cycle_t tmu_timer_read(struct clocksource *cs) { return ((cycle_t)(~_tmu_read(TMU1)))<get_tick(); +} + void __init time_init(void) { unsigned long freq = sparc64_init_timers(); @@ -827,7 +832,7 @@ void __init time_init(void) clocksource_tick.mult = clocksource_hz2mult(freq, clocksource_tick.shift); - clocksource_tick.read = tick_ops->get_tick; + clocksource_tick.read = clocksource_tick_read; printk("clocksource: mult[%x] shift[%d]\n", clocksource_tick.mult, clocksource_tick.shift); diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index b13a87a..c8b9c46 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -65,7 +65,7 @@ static irqreturn_t um_timer(int irq, void *dev) return IRQ_HANDLED; } -static cycle_t itimer_read(void) +static cycle_t itimer_read(struct clocksource *cs) { return os_nsecs() / 1000; } diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 648b3a2..3f0019e 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -722,7 +722,7 @@ static int hpet_cpuhp_notify(struct notifier_block *n, /* * Clock source related code */ -static cycle_t read_hpet(void) +static cycle_t read_hpet(struct clocksource *cs) { return (cycle_t)hpet_readl(HPET_COUNTER); } @@ -756,7 +756,7 @@ static int hpet_clocksource_register(void) hpet_restart_counter(); /* Verify whether hpet counter works */ - t1 = read_hpet(); + t1 = hpet_readl(HPET_COUNTER); rdtscll(start); /* @@ -770,7 +770,7 @@ static int hpet_clocksource_register(void) rdtscll(now); } while ((now - start) < 200000UL); - if (t1 == read_hpet()) { + if (t1 == hpet_readl(HPET_COUNTER)) { printk(KERN_WARNING "HPET counter not counting. HPET disabled\n"); return -ENODEV; diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c index 3475440..c2e0bb0 100644 --- a/arch/x86/kernel/i8253.c +++ b/arch/x86/kernel/i8253.c @@ -129,7 +129,7 @@ void __init setup_pit_timer(void) * to just read by itself. So use jiffies to emulate a free * running counter: */ -static cycle_t pit_read(void) +static cycle_t pit_read(struct clocksource *cs) { static int old_count; static u32 old_jifs; diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 137f2e8..223af43 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -77,6 +77,11 @@ static cycle_t kvm_clock_read(void) return ret; } +static cycle_t kvm_clock_get_cycles(struct clocksource *cs) +{ + return kvm_clock_read(); +} + /* * If we don't do that, there is the possibility that the guest * will calibrate under heavy load - thus, getting a lower lpj - @@ -107,7 +112,7 @@ static void kvm_get_preset_lpj(void) static struct clocksource kvm_clock = { .name = "kvm-clock", - .read = kvm_clock_read, + .read = kvm_clock_get_cycles, .rating = 400, .mask = CLOCKSOURCE_MASK(64), .mult = 1 << KVM_SCALE, diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 7a567eb..d57de05 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -699,7 +699,7 @@ static struct clocksource clocksource_tsc; * code, which is necessary to support wrapping clocksources like pm * timer. */ -static cycle_t read_tsc(void) +static cycle_t read_tsc(struct clocksource *cs) { cycle_t ret = (cycle_t)get_cycles(); diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c index d303369..2b3eb82 100644 --- a/arch/x86/kernel/vmiclock_32.c +++ b/arch/x86/kernel/vmiclock_32.c @@ -283,7 +283,7 @@ void __devinit vmi_time_ap_init(void) /** vmi clocksource */ static struct clocksource clocksource_vmi; -static cycle_t read_real_cycles(void) +static cycle_t read_real_cycles(struct clocksource *cs) { cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL); return max(ret, clocksource_vmi.cycle_last); diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index a208536..ca7ec44 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -663,7 +663,7 @@ static unsigned long lguest_tsc_khz(void) /* If we can't use the TSC, the kernel falls back to our lower-priority * "lguest_clock", where we read the time value given to us by the Host. */ -static cycle_t lguest_clock_read(void) +static cycle_t lguest_clock_read(struct clocksource *cs) { unsigned long sec, nsec; diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 14f2406..0a5aa44 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -213,6 +213,11 @@ cycle_t xen_clocksource_read(void) return ret; } +static cycle_t xen_clocksource_get_cycles(struct clocksource *cs) +{ + return xen_clocksource_read(); +} + static void xen_read_wallclock(struct timespec *ts) { struct shared_info *s = HYPERVISOR_shared_info; @@ -241,7 +246,7 @@ int xen_set_wallclock(unsigned long now) static struct clocksource xen_clocksource __read_mostly = { .name = "xen", .rating = 400, - .read = xen_clocksource_read, + .read = xen_clocksource_get_cycles, .mask = ~0, .mult = 1< value1) diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c index 8615059..64e528e 100644 --- a/drivers/clocksource/cyclone.c +++ b/drivers/clocksource/cyclone.c @@ -19,7 +19,7 @@ int use_cyclone = 0; static void __iomem *cyclone_ptr; -static cycle_t read_cyclone(void) +static cycle_t read_cyclone(struct clocksource *cs) { return (cycle_t)readl(cyclone_ptr); } diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c index b92da67..27f4d96 100644 --- a/drivers/clocksource/scx200_hrt.c +++ b/drivers/clocksource/scx200_hrt.c @@ -43,7 +43,7 @@ MODULE_PARM_DESC(ppm, "+-adjust to actual XO freq (ppm)"); /* The base timer frequency, * 27 if selected */ #define HRT_FREQ 1000000 -static cycle_t read_hrt(void) +static cycle_t read_hrt(struct clocksource *cs) { /* Read the timer value */ return (cycle_t) inl(scx200_cb_base + SCx200_TIMER_OFFSET); diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c index 254f106..01b886e 100644 --- a/drivers/clocksource/tcb_clksrc.c +++ b/drivers/clocksource/tcb_clksrc.c @@ -39,7 +39,7 @@ static void __iomem *tcaddr; -static cycle_t tc_get_cycles(void) +static cycle_t tc_get_cycles(struct clocksource *cs) { unsigned long flags; u32 lower, upper; diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 573819e..0d96cde 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -143,7 +143,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * 400-499: Perfect * The ideal clocksource. A must-use where * available. - * @read: returns a cycle value + * @read: returns a cycle value, passes clocksource as argument * @mask: bitmask for two's complement * subtraction of non 64 bit counters * @mult: cycle to nanosecond multiplier (adjusted by NTP) @@ -162,7 +162,7 @@ struct clocksource { char *name; struct list_head list; int rating; - cycle_t (*read)(void); + cycle_t (*read)(struct clocksource *cs); cycle_t mask; u32 mult; u32 mult_orig; @@ -271,7 +271,7 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant) */ static inline cycle_t clocksource_read(struct clocksource *cs) { - return cs->read(); + return cs->read(cs); } /** diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index c46c931..ecfd7b5 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -181,12 +181,12 @@ static void clocksource_watchdog(unsigned long data) resumed = test_and_clear_bit(0, &watchdog_resumed); - wdnow = watchdog->read(); + wdnow = watchdog->read(watchdog); wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask); watchdog_last = wdnow; list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) { - csnow = cs->read(); + csnow = cs->read(cs); if (unlikely(resumed)) { cs->wd_last = csnow; @@ -247,7 +247,7 @@ static void clocksource_check_watchdog(struct clocksource *cs) list_add(&cs->wd_list, &watchdog_list); if (!started && watchdog) { - watchdog_last = watchdog->read(); + watchdog_last = watchdog->read(watchdog); watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL; add_timer_on(&watchdog_timer, cpumask_first(cpu_online_mask)); @@ -268,7 +268,7 @@ static void clocksource_check_watchdog(struct clocksource *cs) cse->flags &= ~CLOCK_SOURCE_WATCHDOG; /* Start if list is not empty */ if (!list_empty(&watchdog_list)) { - watchdog_last = watchdog->read(); + watchdog_last = watchdog->read(watchdog); watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL; add_timer_on(&watchdog_timer, diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c index 06f1975..c3f6c30 100644 --- a/kernel/time/jiffies.c +++ b/kernel/time/jiffies.c @@ -50,7 +50,7 @@ */ #define JIFFIES_SHIFT 8 -static cycle_t jiffies_read(void) +static cycle_t jiffies_read(struct clocksource *cs) { return (cycle_t) jiffies; } -- cgit v0.10.2 From 4614e6adafa2c5e6c3a9c245af2807fa7bc5117a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 21 Apr 2009 12:24:02 -0700 Subject: clocksource: add enable() and disable() callbacks Add enable() and disable() callbacks for clocksources. This allows us to put unused clocksources in power save mode. The functions clocksource_enable() and clocksource_disable() wrap the callbacks and are inserted in the timekeeping code to enable before use and disable after switching to a new clocksource. Signed-off-by: Magnus Damm Acked-by: John Stultz Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 0d96cde..5a40d14 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -144,6 +144,8 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * The ideal clocksource. A must-use where * available. * @read: returns a cycle value, passes clocksource as argument + * @enable: optional function to enable the clocksource + * @disable: optional function to disable the clocksource * @mask: bitmask for two's complement * subtraction of non 64 bit counters * @mult: cycle to nanosecond multiplier (adjusted by NTP) @@ -163,6 +165,8 @@ struct clocksource { struct list_head list; int rating; cycle_t (*read)(struct clocksource *cs); + int (*enable)(struct clocksource *cs); + void (*disable)(struct clocksource *cs); cycle_t mask; u32 mult; u32 mult_orig; @@ -275,6 +279,33 @@ static inline cycle_t clocksource_read(struct clocksource *cs) } /** + * clocksource_enable: - enable clocksource + * @cs: pointer to clocksource + * + * Enables the specified clocksource. The clocksource callback + * function should start up the hardware and setup mult and field + * members of struct clocksource to reflect hardware capabilities. + */ +static inline int clocksource_enable(struct clocksource *cs) +{ + return cs->enable ? cs->enable(cs) : 0; +} + +/** + * clocksource_disable: - disable clocksource + * @cs: pointer to clocksource + * + * Disables the specified clocksource. The clocksource callback + * function should power down the now unused hardware block to + * save power. + */ +static inline void clocksource_disable(struct clocksource *cs) +{ + if (cs->disable) + cs->disable(cs); +} + +/** * cyc2ns - converts clocksource cycles to nanoseconds * @cs: Pointer to clocksource * @cycles: Cycles diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 900f1b6..687dff4 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -182,7 +182,7 @@ EXPORT_SYMBOL(do_settimeofday); */ static void change_clocksource(void) { - struct clocksource *new; + struct clocksource *new, *old; new = clocksource_get_next(); @@ -191,11 +191,16 @@ static void change_clocksource(void) clocksource_forward_now(); - new->raw_time = clock->raw_time; + if (clocksource_enable(new)) + return; + new->raw_time = clock->raw_time; + old = clock; clock = new; + clocksource_disable(old); + clock->cycle_last = 0; - clock->cycle_last = clocksource_read(new); + clock->cycle_last = clocksource_read(clock); clock->error = 0; clock->xtime_nsec = 0; clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH); @@ -292,6 +297,7 @@ void __init timekeeping_init(void) ntp_init(); clock = clocksource_get_next(); + clocksource_enable(clock); clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH); clock->cycle_last = clocksource_read(clock); -- cgit v0.10.2 From 8b32b5d0dca2f5ab632e8bedcd57fe4c109c13fe Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 21 Apr 2009 12:24:02 -0700 Subject: ipmi: fix platform return check The wrong return value is being tested when allocating a platform device in the IPMI SI code. Check the right value. Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index e58ea4c..2438fdf 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2863,7 +2863,7 @@ static int try_smi_init(struct smi_info *new_smi) */ new_smi->pdev = platform_device_alloc("ipmi_si", new_smi->intf_num); - if (rv) { + if (!new_smi->pdev) { printk(KERN_ERR "ipmi_si_intf:" " Unable to allocate platform device\n"); -- cgit v0.10.2 From 40112ae7504745799e75ef418057f0d2cb745050 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 21 Apr 2009 12:24:03 -0700 Subject: ipmi: test for event buffer before using The IPMI driver would attempt to use the event buffer even if that didn't exist on the BMC. This patch modified the IPMI driver to check for the event buffer's existence before trying to use it. Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 2438fdf..2596446 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -82,12 +82,6 @@ #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a short timeout */ -/* Bit for BMC global enables. */ -#define IPMI_BMC_RCV_MSG_INTR 0x01 -#define IPMI_BMC_EVT_MSG_INTR 0x02 -#define IPMI_BMC_EVT_MSG_BUFF 0x04 -#define IPMI_BMC_SYS_LOG 0x08 - enum si_intf_state { SI_NORMAL, SI_GETTING_FLAGS, @@ -220,6 +214,9 @@ struct smi_info { OEM2_DATA_AVAIL) unsigned char msg_flags; + /* Does the BMC have an event buffer? */ + char has_event_buffer; + /* * If set to true, this will request events the next time the * state machine is idle. @@ -968,7 +965,8 @@ static void request_events(void *send_info) { struct smi_info *smi_info = send_info; - if (atomic_read(&smi_info->stop_operation)) + if (atomic_read(&smi_info->stop_operation) || + !smi_info->has_event_buffer) return; atomic_set(&smi_info->req_events, 1); @@ -2407,26 +2405,9 @@ static struct of_platform_driver ipmi_of_platform_driver = { }; #endif /* CONFIG_PPC_OF */ - -static int try_get_dev_id(struct smi_info *smi_info) +static int wait_for_msg_done(struct smi_info *smi_info) { - unsigned char msg[2]; - unsigned char *resp; - unsigned long resp_len; enum si_sm_result smi_result; - int rv = 0; - - resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); - if (!resp) - return -ENOMEM; - - /* - * Do a Get Device ID command, since it comes back with some - * useful info. - */ - msg[0] = IPMI_NETFN_APP_REQUEST << 2; - msg[1] = IPMI_GET_DEVICE_ID_CMD; - smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); smi_result = smi_info->handlers->event(smi_info->si_sm, 0); for (;;) { @@ -2441,16 +2422,39 @@ static int try_get_dev_id(struct smi_info *smi_info) } else break; } - if (smi_result == SI_SM_HOSED) { + if (smi_result == SI_SM_HOSED) /* * We couldn't get the state machine to run, so whatever's at * the port is probably not an IPMI SMI interface. */ - rv = -ENODEV; + return -ENODEV; + + return 0; +} + +static int try_get_dev_id(struct smi_info *smi_info) +{ + unsigned char msg[2]; + unsigned char *resp; + unsigned long resp_len; + int rv = 0; + + resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + /* + * Do a Get Device ID command, since it comes back with some + * useful info. + */ + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_DEVICE_ID_CMD; + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + + rv = wait_for_msg_done(smi_info); + if (rv) goto out; - } - /* Otherwise, we got some data. */ resp_len = smi_info->handlers->get_result(smi_info->si_sm, resp, IPMI_MAX_MSG_LENGTH); @@ -2462,6 +2466,88 @@ static int try_get_dev_id(struct smi_info *smi_info) return rv; } +static int try_enable_event_buffer(struct smi_info *smi_info) +{ + unsigned char msg[3]; + unsigned char *resp; + unsigned long resp_len; + int rv = 0; + + resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + + rv = wait_for_msg_done(smi_info); + if (rv) { + printk(KERN_WARNING + "ipmi_si: Error getting response from get global," + " enables command, the event buffer is not" + " enabled.\n"); + goto out; + } + + resp_len = smi_info->handlers->get_result(smi_info->si_sm, + resp, IPMI_MAX_MSG_LENGTH); + + if (resp_len < 4 || + resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 || + resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD || + resp[2] != 0) { + printk(KERN_WARNING + "ipmi_si: Invalid return from get global" + " enables command, cannot enable the event" + " buffer.\n"); + rv = -EINVAL; + goto out; + } + + if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) + /* buffer is already enabled, nothing to do. */ + goto out; + + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF; + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3); + + rv = wait_for_msg_done(smi_info); + if (rv) { + printk(KERN_WARNING + "ipmi_si: Error getting response from set global," + " enables command, the event buffer is not" + " enabled.\n"); + goto out; + } + + resp_len = smi_info->handlers->get_result(smi_info->si_sm, + resp, IPMI_MAX_MSG_LENGTH); + + if (resp_len < 3 || + resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 || + resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) { + printk(KERN_WARNING + "ipmi_si: Invalid return from get global," + "enables command, not enable the event" + " buffer.\n"); + rv = -EINVAL; + goto out; + } + + if (resp[2] != 0) + /* + * An error when setting the event buffer bit means + * that the event buffer is not supported. + */ + rv = -ENOENT; + out: + kfree(resp); + return rv; +} + static int type_file_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data) { @@ -2847,6 +2933,10 @@ static int try_smi_init(struct smi_info *new_smi) new_smi->intf_num = smi_num; smi_num++; + rv = try_enable_event_buffer(new_smi); + if (rv == 0) + new_smi->has_event_buffer = 1; + /* * Start clearing the flags before we enable interrupts or the * timer to avoid racing with the timer. diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h index b56a158..a079f58 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/linux/ipmi_msgdefs.h @@ -58,6 +58,12 @@ #define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 #define IPMI_GET_CHANNEL_INFO_CMD 0x42 +/* Bit for BMC global enables. */ +#define IPMI_BMC_RCV_MSG_INTR 0x01 +#define IPMI_BMC_EVT_MSG_INTR 0x02 +#define IPMI_BMC_EVT_MSG_BUFF 0x04 +#define IPMI_BMC_SYS_LOG 0x08 + #define IPMI_NETFN_STORAGE_REQUEST 0x0a #define IPMI_NETFN_STORAGE_RESPONSE 0x0b #define IPMI_ADD_SEL_ENTRY_CMD 0x44 -- cgit v0.10.2 From 25176ed670121e1e0aae5c8161713c332b786538 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 21 Apr 2009 12:24:04 -0700 Subject: ipmi: fix statistics counting issues Bela Lubkin noticed that the statistics for send IPMB and LAN commands in the IPMI driver could be incremented even if an error occurred. Move the increments to the proper place to avoid this. Also add some statistics for retransmissions that failed, and some little helper functions to neaten up the code a little. Signed-off-by: Corey Minyard Cc: Bela Lubkin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index e93fc8d..83c7477 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -285,6 +285,11 @@ enum ipmi_stat_indexes { /* Events that were received with the proper format. */ IPMI_STAT_events, + /* Retransmissions on IPMB that failed. */ + IPMI_STAT_dropped_rexmit_ipmb_commands, + + /* Retransmissions on LAN that failed. */ + IPMI_STAT_dropped_rexmit_lan_commands, /* This *must* remain last, add new values above this. */ IPMI_NUM_STATS @@ -445,6 +450,20 @@ static DEFINE_MUTEX(smi_watchers_mutex); #define ipmi_get_stat(intf, stat) \ ((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat])) +static int is_lan_addr(struct ipmi_addr *addr) +{ + return addr->addr_type == IPMI_LAN_ADDR_TYPE; +} + +static int is_ipmb_addr(struct ipmi_addr *addr) +{ + return addr->addr_type == IPMI_IPMB_ADDR_TYPE; +} + +static int is_ipmb_bcast_addr(struct ipmi_addr *addr) +{ + return addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE; +} static void free_recv_msg_list(struct list_head *q) { @@ -601,8 +620,7 @@ ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2) return (smi_addr1->lun == smi_addr2->lun); } - if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE) - || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) { + if (is_ipmb_addr(addr1) || is_ipmb_bcast_addr(addr1)) { struct ipmi_ipmb_addr *ipmb_addr1 = (struct ipmi_ipmb_addr *) addr1; struct ipmi_ipmb_addr *ipmb_addr2 @@ -612,7 +630,7 @@ ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2) && (ipmb_addr1->lun == ipmb_addr2->lun)); } - if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) { + if (is_lan_addr(addr1)) { struct ipmi_lan_addr *lan_addr1 = (struct ipmi_lan_addr *) addr1; struct ipmi_lan_addr *lan_addr2 @@ -644,14 +662,13 @@ int ipmi_validate_addr(struct ipmi_addr *addr, int len) || (addr->channel < 0)) return -EINVAL; - if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) - || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) { + if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) { if (len < sizeof(struct ipmi_ipmb_addr)) return -EINVAL; return 0; } - if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { + if (is_lan_addr(addr)) { if (len < sizeof(struct ipmi_lan_addr)) return -EINVAL; return 0; @@ -1503,8 +1520,7 @@ static int i_ipmi_request(ipmi_user_t user, memcpy(&(smi_msg->data[2]), msg->data, msg->data_len); smi_msg->data_size = msg->data_len + 2; ipmi_inc_stat(intf, sent_local_commands); - } else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) - || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) { + } else if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) { struct ipmi_ipmb_addr *ipmb_addr; unsigned char ipmb_seq; long seqid; @@ -1583,8 +1599,6 @@ static int i_ipmi_request(ipmi_user_t user, spin_lock_irqsave(&(intf->seq_lock), flags); - ipmi_inc_stat(intf, sent_ipmb_commands); - /* * Create a sequence number with a 1 second * timeout and 4 retries. @@ -1606,6 +1620,8 @@ static int i_ipmi_request(ipmi_user_t user, goto out_err; } + ipmi_inc_stat(intf, sent_ipmb_commands); + /* * Store the sequence number in the message, * so that when the send message response @@ -1635,7 +1651,7 @@ static int i_ipmi_request(ipmi_user_t user, */ spin_unlock_irqrestore(&(intf->seq_lock), flags); } - } else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { + } else if (is_lan_addr(addr)) { struct ipmi_lan_addr *lan_addr; unsigned char ipmb_seq; long seqid; @@ -1696,8 +1712,6 @@ static int i_ipmi_request(ipmi_user_t user, spin_lock_irqsave(&(intf->seq_lock), flags); - ipmi_inc_stat(intf, sent_lan_commands); - /* * Create a sequence number with a 1 second * timeout and 4 retries. @@ -1719,6 +1733,8 @@ static int i_ipmi_request(ipmi_user_t user, goto out_err; } + ipmi_inc_stat(intf, sent_lan_commands); + /* * Store the sequence number in the message, * so that when the send message response @@ -1937,6 +1953,10 @@ static int stat_file_read_proc(char *page, char **start, off_t off, ipmi_get_stat(intf, invalid_events)); out += sprintf(out, "events: %u\n", ipmi_get_stat(intf, events)); + out += sprintf(out, "failed rexmit LAN msgs: %u\n", + ipmi_get_stat(intf, dropped_rexmit_lan_commands)); + out += sprintf(out, "failed rexmit IPMB msgs: %u\n", + ipmi_get_stat(intf, dropped_rexmit_ipmb_commands)); return (out - ((char *) page)); } @@ -3730,7 +3750,7 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, list_add_tail(&msg->link, timeouts); if (ent->broadcast) ipmi_inc_stat(intf, timed_out_ipmb_broadcasts); - else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE) + else if (is_lan_addr(&ent->recv_msg->addr)) ipmi_inc_stat(intf, timed_out_lan_commands); else ipmi_inc_stat(intf, timed_out_ipmb_commands); @@ -3744,15 +3764,17 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, */ ent->timeout = MAX_MSG_TIMEOUT; ent->retries_left--; - if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE) - ipmi_inc_stat(intf, retransmitted_lan_commands); - else - ipmi_inc_stat(intf, retransmitted_ipmb_commands); - smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot, ent->seqid); - if (!smi_msg) + if (!smi_msg) { + if (is_lan_addr(&ent->recv_msg->addr)) + ipmi_inc_stat(intf, + dropped_rexmit_lan_commands); + else + ipmi_inc_stat(intf, + dropped_rexmit_ipmb_commands); return; + } spin_unlock_irqrestore(&intf->seq_lock, *flags); @@ -3764,10 +3786,17 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, * resent. */ handlers = intf->handlers; - if (handlers) + if (handlers) { + if (is_lan_addr(&ent->recv_msg->addr)) + ipmi_inc_stat(intf, + retransmitted_lan_commands); + else + ipmi_inc_stat(intf, + retransmitted_ipmb_commands); + intf->handlers->sender(intf->send_info, smi_msg, 0); - else + } else ipmi_free_smi_msg(smi_msg); spin_lock_irqsave(&intf->seq_lock, *flags); -- cgit v0.10.2 From 4dec302ff71ebf48f5784a2d2fc5e3745e6d4d52 Mon Sep 17 00:00:00 2001 From: dann frazier Date: Tue, 21 Apr 2009 12:24:05 -0700 Subject: ipmi: add oem message handling Enable userspace to receive messages that a BMC transmits using an OEM medium. This is used by the HP iLO2. Based on code originally written by Patrick Schoeller. Signed-off-by: dann frazier Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 83c7477..aa83a08 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -3284,6 +3284,114 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t intf, return rv; } +/* + * This routine will handle "Get Message" command responses with + * channels that use an OEM Medium. The message format belongs to + * the OEM. See IPMI 2.0 specification, Chapter 6 and + * Chapter 22, sections 22.6 and 22.24 for more details. + */ +static int handle_oem_get_msg_cmd(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct cmd_rcvr *rcvr; + int rv = 0; + unsigned char netfn; + unsigned char cmd; + unsigned char chan; + ipmi_user_t user = NULL; + struct ipmi_system_interface_addr *smi_addr; + struct ipmi_recv_msg *recv_msg; + + /* + * We expect the OEM SW to perform error checking + * so we just do some basic sanity checks + */ + if (msg->rsp_size < 4) { + /* Message not big enough, just ignore it. */ + ipmi_inc_stat(intf, invalid_commands); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + /* + * This is an OEM Message so the OEM needs to know how + * handle the message. We do no interpretation. + */ + netfn = msg->rsp[0] >> 2; + cmd = msg->rsp[1]; + chan = msg->rsp[3] & 0xf; + + rcu_read_lock(); + rcvr = find_cmd_rcvr(intf, netfn, cmd, chan); + if (rcvr) { + user = rcvr->user; + kref_get(&user->refcount); + } else + user = NULL; + rcu_read_unlock(); + + if (user == NULL) { + /* We didn't find a user, just give up. */ + ipmi_inc_stat(intf, unhandled_commands); + + /* + * Don't do anything with these messages, just allow + * them to be freed. + */ + + rv = 0; + } else { + /* Deliver the message to the user. */ + ipmi_inc_stat(intf, handled_commands); + + recv_msg = ipmi_alloc_recv_msg(); + if (!recv_msg) { + /* + * We couldn't allocate memory for the + * message, so requeue it for handling + * later. + */ + rv = 1; + kref_put(&user->refcount, free_user); + } else { + /* + * OEM Messages are expected to be delivered via + * the system interface to SMS software. We might + * need to visit this again depending on OEM + * requirements + */ + smi_addr = ((struct ipmi_system_interface_addr *) + &(recv_msg->addr)); + smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr->channel = IPMI_BMC_CHANNEL; + smi_addr->lun = msg->rsp[0] & 3; + + recv_msg->user = user; + recv_msg->user_msg_data = NULL; + recv_msg->recv_type = IPMI_OEM_RECV_TYPE; + recv_msg->msg.netfn = msg->rsp[0] >> 2; + recv_msg->msg.cmd = msg->rsp[1]; + recv_msg->msg.data = recv_msg->msg_data; + + /* + * The message starts at byte 4 which follows the + * the Channel Byte in the "GET MESSAGE" command + */ + recv_msg->msg.data_len = msg->rsp_size - 4; + memcpy(recv_msg->msg_data, + &(msg->rsp[4]), + msg->rsp_size - 4); + deliver_response(recv_msg); + } + } + + return rv; +} + static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg, struct ipmi_smi_msg *msg) { @@ -3539,6 +3647,17 @@ static int handle_new_recv_msg(ipmi_smi_t intf, goto out; } + /* + ** We need to make sure the channels have been initialized. + ** The channel_handler routine will set the "curr_channel" + ** equal to or greater than IPMI_MAX_CHANNELS when all the + ** channels for this interface have been initialized. + */ + if (intf->curr_channel < IPMI_MAX_CHANNELS) { + requeue = 1; /* Just put the message back for now */ + goto out; + } + switch (intf->channels[chan].medium) { case IPMI_CHANNEL_MEDIUM_IPMB: if (msg->rsp[4] & 0x04) { @@ -3574,11 +3693,20 @@ static int handle_new_recv_msg(ipmi_smi_t intf, break; default: - /* - * We don't handle the channel type, so just - * free the message. - */ - requeue = 0; + /* Check for OEM Channels. Clients had better + register for these commands. */ + if ((intf->channels[chan].medium + >= IPMI_CHANNEL_MEDIUM_OEM_MIN) + && (intf->channels[chan].medium + <= IPMI_CHANNEL_MEDIUM_OEM_MAX)) { + requeue = handle_oem_get_msg_cmd(intf, msg); + } else { + /* + * We don't handle the channel type, so just + * free the message. + */ + requeue = 0; + } } } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 7ebdb4f..65aae34 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -198,6 +198,8 @@ struct kernel_ipmi_msg { response. When you send a response message, this will be returned. */ +#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */ + /* Note that async events and received commands do not have a completion code as the first byte of the incoming data, unlike a response. */ diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h index a079f58..df97e6e 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/linux/ipmi_msgdefs.h @@ -115,5 +115,7 @@ #define IPMI_CHANNEL_MEDIUM_USB1 10 #define IPMI_CHANNEL_MEDIUM_USB2 11 #define IPMI_CHANNEL_MEDIUM_SYSINTF 12 +#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60 +#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f #endif /* __LINUX_IPMI_MSGDEFS_H */ -- cgit v0.10.2 From c12ddba09394c60e1120e6997794fa6ed52da884 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 21 Apr 2009 12:24:05 -0700 Subject: hugetlbfs: return negative error code for bad mount option This fixes the following BUG: # mount -o size=MM -t hugetlbfs none /huge hugetlbfs: Bad value 'MM' for mount option 'size=MM' ------------[ cut here ]------------ kernel BUG at fs/super.c:996! Due to BUG_ON(!mnt->mnt_sb); in vfs_kern_mount(). Also, remove unused #include Cc: William Irwin Cc: Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index 23a3c76..153d968 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -842,7 +841,7 @@ hugetlbfs_parse_options(char *options, struct hugetlbfs_config *pconfig) bad_val: printk(KERN_ERR "hugetlbfs: Bad value '%s' for mount option '%s'\n", args[0].from, p); - return 1; + return -EINVAL; } static int -- cgit v0.10.2 From e638c1394010859a015a3b533ee452d768e62cea Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 21 Apr 2009 12:24:41 -0700 Subject: memcg: use rcu_dereference to access mm->owner mm->owner should be accessed with rcu_dereference(). Reported-by: KOSAKI Motohiro Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 18146c9..a9e3b76 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -75,7 +75,7 @@ int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup) { struct mem_cgroup *mem; rcu_read_lock(); - mem = mem_cgroup_from_task((mm)->owner); + mem = mem_cgroup_from_task(rcu_dereference((mm)->owner)); rcu_read_unlock(); return cgroup == mem; } -- cgit v0.10.2 From aa0b8f3687f06ac0e5a2b24547fdf431e923c475 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 21 Apr 2009 12:24:42 -0700 Subject: drivers/input/serio/hp_sdc.c: fix crash when removing hp_sdc module On parisc machines, which don't have HIL, removing the hp_sdc module panics the kernel. Fix this by returning early in hp_sdc_exit() if no HP SDC controller was found. Add functionality to probe for the hp_sdc_mlc kernel module (which takes care of the upper layer HIL functionality on parisc) after two seconds. This is needed to get all the other HIL drivers (keyboard / mouse/ ..) drivers automatically loaded by udev later as well. Signed-off-by: Helge Deller Cc: Geert Uytterhoeven Cc: Frans Pop Cc: Kyle McMartin Cc: Grant Grundler Acked-by: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index bfe4924..1c9410d 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -819,6 +819,7 @@ static const struct parisc_device_id hp_sdc_tbl[] = { MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl); static int __init hp_sdc_init_hppa(struct parisc_device *d); +static struct delayed_work moduleloader_work; static struct parisc_driver hp_sdc_driver = { .name = "hp_sdc", @@ -930,8 +931,15 @@ static int __init hp_sdc_init(void) #if defined(__hppa__) +static void request_module_delayed(struct work_struct *work) +{ + request_module("hp_sdc_mlc"); +} + static int __init hp_sdc_init_hppa(struct parisc_device *d) { + int ret; + if (!d) return 1; if (hp_sdc.dev != NULL) @@ -944,13 +952,26 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) hp_sdc.data_io = d->hpa.start + 0x800; hp_sdc.status_io = d->hpa.start + 0x801; - return hp_sdc_init(); + INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed); + + ret = hp_sdc_init(); + /* after sucessfull initialization give SDC some time to settle + * and then load the hp_sdc_mlc upper layer driver */ + if (!ret) + schedule_delayed_work(&moduleloader_work, + msecs_to_jiffies(2000)); + + return ret; } #endif /* __hppa__ */ static void hp_sdc_exit(void) { + /* do nothing if we don't have a SDC */ + if (!hp_sdc.dev) + return; + write_lock_irq(&hp_sdc.lock); /* Turn off all maskable "sub-function" irq's. */ @@ -969,6 +990,7 @@ static void hp_sdc_exit(void) tasklet_kill(&hp_sdc.task); #if defined(__hppa__) + cancel_delayed_work_sync(&moduleloader_work); if (unregister_parisc_driver(&hp_sdc_driver)) printk(KERN_WARNING PREFIX "Error unregistering HP SDC"); #endif -- cgit v0.10.2 From 148da331200a0df8195e10eb8a38fd77bd7003af Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Tue, 21 Apr 2009 12:24:43 -0700 Subject: pxa2xx_spi: restore DRCMR on resume If DMA is enabled, any spi_sync call after suspend/resume would block forever, because DRCMR is lost on suspend. This patch restores DRCMR to the same values set by probe. Signed-off-by: Daniel Ribeiro Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index c76feea..1a00b41 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1700,6 +1700,13 @@ static int pxa2xx_spi_resume(struct platform_device *pdev) struct ssp_device *ssp = drv_data->ssp; int status = 0; + if (drv_data->rx_channel != -1) + DRCMR(drv_data->ssp->drcmr_rx) = + DRCMR_MAPVLD | drv_data->rx_channel; + if (drv_data->tx_channel != -1) + DRCMR(drv_data->ssp->drcmr_tx) = + DRCMR_MAPVLD | drv_data->tx_channel; + /* Enable the SSP clock */ clk_enable(ssp->clk); -- cgit v0.10.2 From 3285821bc5850f5bb099e803a55b0fd884a153b8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 21 Apr 2009 12:24:44 -0700 Subject: MAINTAINERS: remove include/asm-*/suspend* file patterns There are no more arches with suspend support using these directories. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 6baace3..8106118 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2562,7 +2562,6 @@ F: kernel/power/ F: include/linux/suspend.h F: include/linux/freezer.h F: include/linux/pm.h -F: include/asm-*/suspend*.h F: arch/*/include/asm/suspend*.h HID CORE LAYER @@ -5404,7 +5403,6 @@ F: kernel/power/ F: include/linux/suspend.h F: include/linux/freezer.h F: include/linux/pm.h -F: include/asm-*/suspend.h SVGA HANDLING P: Martin Mares -- cgit v0.10.2 From dc8c7f8919aeb2d89247bdf302ad68b569a2b1e2 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 21 Apr 2009 12:24:45 -0700 Subject: MAINTAINERS: update KMEMTRACE pattern after file rename Signed-off-by: Joe Perches Acked-by: Pekka Enberg Acked-by: Eduard - Gabriel Munteanu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 8106118..72485b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3339,7 +3339,7 @@ P: Eduard - Gabriel Munteanu M: eduard.munteanu@linux360.ro L: linux-kernel@vger.kernel.org S: Maintained -F: Documentation/vm/kmemtrace.txt +F: Documentation/trace/kmemtrace.txt F: include/trace/kmemtrace.h F: kernel/trace/kmemtrace.c -- cgit v0.10.2 From 306c68aaa7c62010428196d309fda30b6bf57710 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 21 Apr 2009 12:24:46 -0700 Subject: spi: pxa2xx: limit reaches -1 On line 944 the return value of flush() is considered as a boolean, but limit reaches -1 upon timeout which evaluates to true. On 540, 594, 720 the same occurs for wait_ssp_rx_stall() On 536 the same occurs for wait_dma_channel_stop() Signed-off-by: Roel Kluin Acked-by: Eric Miao Cc: David Brownell Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 1a00b41..885194a 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -213,7 +213,7 @@ static int flush(struct driver_data *drv_data) while (read_SSSR(reg) & SSSR_RNE) { read_SSDR(reg); } - } while ((read_SSSR(reg) & SSSR_BSY) && limit--); + } while ((read_SSSR(reg) & SSSR_BSY) && --limit); write_SSSR(SSSR_ROR, reg); return limit; @@ -484,7 +484,7 @@ static int wait_ssp_rx_stall(void const __iomem *ioaddr) { unsigned long limit = loops_per_jiffy << 1; - while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--) + while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit) cpu_relax(); return limit; @@ -494,7 +494,7 @@ static int wait_dma_channel_stop(int channel) { unsigned long limit = loops_per_jiffy << 1; - while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--) + while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit) cpu_relax(); return limit; -- cgit v0.10.2 From 0f249221813150b92c9d85b6bd232e7ee695ec6e Mon Sep 17 00:00:00 2001 From: Matt Mackall Date: Tue, 21 Apr 2009 12:24:47 -0700 Subject: MAINTAINERS: add Matt Mackall to embedded maintainers Impact: make more work for myself Signed-off-by: Matt Mackall Cc: David Woodhouse Acked-by: Paul Gortmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 72485b6..8aa117b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2065,6 +2065,8 @@ F: drivers/infiniband/hw/ehca/ EMBEDDED LINUX P: Paul Gortmaker M: paul.gortmaker@windriver.com +P: Matt Mackall +M: mpm@selenic.com P: David Woodhouse M: dwmw2@infradead.org L: linux-embedded@vger.kernel.org -- cgit v0.10.2 From 14fadca793e39742f442df53391cdd1437b9262f Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Tue, 21 Apr 2009 12:24:47 -0700 Subject: MAINTAINERS: add a more searchable string for the H8300 architecture. Add a parenthesized string of "H8300" for more convenient searchability in the MAINTAINERS file. Signed-off-by: Robert P. J. Day Cc: Yoshinori Sato Cc: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 8aa117b..cb95710 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5638,7 +5638,7 @@ L: uclinux-dev@uclinux.org (subscribers-only) S: Maintained F: arch/m68knommu/ -UCLINUX FOR RENESAS H8/300 +UCLINUX FOR RENESAS H8/300 (H8300) P: Yoshinori Sato M: ysato@users.sourceforge.jp W: http://uclinux-h8.sourceforge.jp/ -- cgit v0.10.2 From 6e538aaf50ae782a890cbc02c27950448d8193e1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 21 Apr 2009 12:24:49 -0700 Subject: spi: documentation: emphasise spi_master.setup() semantics This is a doc-only patch which I hope will reduce the number of spi_master controller driver patches starting out with a common implementation bug. (As in: almost every spi_master driver I see starts out with its version of this bug. Sigh.) It just re-emphasizes that the setup() method may be called for one device while a transfer is active on another ... which means that most driver implementations shouldn't touch any registers. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 0f5122e..4a02d25 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -511,10 +511,16 @@ SPI MASTER METHODS This sets up the device clock rate, SPI mode, and word sizes. Drivers may change the defaults provided by board_info, and then call spi_setup(spi) to invoke this routine. It may sleep. + Unless each SPI slave has its own configuration registers, don't change them right away ... otherwise drivers could corrupt I/O that's in progress for other SPI devices. + ** BUG ALERT: for some reason the first version of + ** many spi_master drivers seems to get this wrong. + ** When you code setup(), ASSUME that the controller + ** is actively processing transfers for another device. + master->transfer(struct spi_device *spi, struct spi_message *message) This must not sleep. Its responsibility is arrange that the transfer happens and its complete() callback is issued. The two diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 2cc43fa..a0faa18 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -245,7 +245,12 @@ struct spi_master { */ u16 dma_alignment; - /* setup mode and clock, etc (spi driver may call many times) */ + /* Setup mode and clock, etc (spi driver may call many times). + * + * IMPORTANT: this may be called when transfers to another + * device are active. DO NOT UPDATE SHARED REGISTERS in ways + * which could break those transfers. + */ int (*setup)(struct spi_device *spi); /* bidirectional bulk transfers -- cgit v0.10.2 From 6d029b645175ae71fdeedea84b246ecb1362d003 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Tue, 21 Apr 2009 12:24:49 -0700 Subject: rtc-cmos: fix printk output With no IRQ available/defined, RTC-CMOS driver prints something like: rtc0: alarms up to one no, y3k, 114 bytes nvram ^^^^ I guess the following is a bit easier to understand: rtc0: no alarms, y3k, 114 bytes nvram Signed-off-by: Krzysztof Halasa Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index b6d35f5..23e10b6 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -797,17 +797,15 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) goto cleanup2; } - pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n", - dev_name(&cmos_rtc.rtc->dev), - is_valid_irq(rtc_irq) - ? (cmos_rtc.mon_alrm - ? "year" - : (cmos_rtc.day_alrm - ? "month" : "day")) - : "no", - cmos_rtc.century ? ", y3k" : "", - nvram.size, - is_hpet_enabled() ? ", hpet irqs" : ""); + pr_info("%s: %s%s, %zd bytes nvram%s\n", + dev_name(&cmos_rtc.rtc->dev), + !is_valid_irq(rtc_irq) ? "no alarms" : + cmos_rtc.mon_alrm ? "alarms up to one year" : + cmos_rtc.day_alrm ? "alarms up to one month" : + "alarms up to one day", + cmos_rtc.century ? ", y3k" : "", + nvram.size, + is_hpet_enabled() ? ", hpet irqs" : ""); return 0; -- cgit v0.10.2 From 77e38a554aae2c3cdbf852117bc09bac6f95dae1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Apr 2009 12:24:51 -0700 Subject: frv: insert PCI root bus resources for the MB93090 devel motherboard Insert PCI root bus resources for the FRV-based MB93090 development kit motherboard. This is required because the CPU's window onto the PCI bus address space is considerably smaller than the CPU's full address space and non-PCI devices lie outside of the PCI window that we might want to access. Without this patch, the PCI root bus uses the platform-level bus resources, and these are then confined to the PCI window, thus making platform_device_add() reject devices outside of this window. Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c index 0f41c3a..c0dcec6 100644 --- a/arch/frv/mb93090-mb00/pci-vdk.c +++ b/arch/frv/mb93090-mb00/pci-vdk.c @@ -31,6 +31,29 @@ struct pci_bus *__nongpreldata pci_root_bus; struct pci_ops *__nongpreldata pci_root_ops; /* + * The accessible PCI window does not cover the entire CPU address space, but + * there are devices we want to access outside of that window, so we need to + * insert specific PCI bus resources instead of using the platform-level bus + * resources directly for the PCI root bus. + * + * These are configured and inserted by pcibios_init() and are attached to the + * root bus by pcibios_fixup_bus(). + */ +static struct resource pci_ioport_resource = { + .name = "PCI IO", + .start = 0, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct resource pci_iomem_resource = { + .name = "PCI mem", + .start = 0, + .end = -1, + .flags = IORESOURCE_MEM, +}; + +/* * Functions for accessing PCI configuration space */ @@ -304,6 +327,12 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) #if 0 printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number); #endif + + if (bus->number == 0) { + bus->resource[0] = &pci_ioport_resource; + bus->resource[1] = &pci_iomem_resource; + } + pci_read_bridge_bases(bus); if (bus->number == 0) { @@ -350,28 +379,36 @@ int __init pcibios_init(void) /* enable PCI arbitration */ __reg_MB86943_pci_arbiter = MB86943_PCIARB_EN; - ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00; - ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff; - ioport_resource.end += ioport_resource.start; + pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00; + pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff; + pci_ioport_resource.end += pci_ioport_resource.start; printk("PCI IO window: %08llx-%08llx\n", - (unsigned long long) ioport_resource.start, - (unsigned long long) ioport_resource.end); + (unsigned long long) pci_ioport_resource.start, + (unsigned long long) pci_ioport_resource.end); - iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00; + pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00; + pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff; + pci_iomem_resource.end += pci_iomem_resource.start; - /* Reserve somewhere to write to flush posted writes. */ - iomem_resource.start += 0x400; - - iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff; - iomem_resource.end += iomem_resource.start; + /* Reserve somewhere to write to flush posted writes. This is used by + * __flush_PCI_writes() from asm/io.h to force the write FIFO in the + * CPU-PCI bridge to flush as this doesn't happen automatically when a + * read is performed on the MB93090 development kit motherboard. + */ + pci_iomem_resource.start += 0x400; printk("PCI MEM window: %08llx-%08llx\n", - (unsigned long long) iomem_resource.start, - (unsigned long long) iomem_resource.end); + (unsigned long long) pci_iomem_resource.start, + (unsigned long long) pci_iomem_resource.end); printk("PCI DMA memory: %08lx-%08lx\n", dma_coherent_mem_start, dma_coherent_mem_end); + if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0) + panic("Unable to insert PCI IOMEM resource\n"); + if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0) + panic("Unable to insert PCI IOPORT resource\n"); + if (!pci_probe) return -ENXIO; -- cgit v0.10.2 From 2d7197f412e75587037449960bc4c7ea06155a7f Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 21 Apr 2009 12:24:52 -0700 Subject: uml: kill a kconfig warning Got this warning from Kconfig: boolean symbol INPUT tested for 'm'? test forced to 'n' because INPUT is tristate, not bool. Signed-off-by: WANG Cong Cc: Sam Ravnborg Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest index 7b5cea7..0ccad0f 100644 --- a/arch/um/Kconfig.rest +++ b/arch/um/Kconfig.rest @@ -36,7 +36,7 @@ source "drivers/leds/Kconfig" #This is just to shut up some Kconfig warnings, so no prompt. config INPUT - bool + tristate default n source "arch/um/Kconfig.debug" -- cgit v0.10.2 From e873cff0fada2b0532ca5104d5b5f5b02aa442b2 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Tue, 21 Apr 2009 12:24:53 -0700 Subject: sgi-xp/sgi-gru: allow modules to load on non-uv systems For an upcoming distro release, we need to have the xp kernel module loadable even when not on UV equipment. The xpc module will not load. This will allow one set of modules dependent upon xp to work on either UV or non-UV equipment. Signed-off-by: Robin Holt Signed-off-by: Jack Steiner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 3e6e42d..bbefe77 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -375,7 +375,7 @@ static int __init gru_init(void) void *gru_start_vaddr; if (!is_uv_system()) - return -ENODEV; + return 0; #if defined CONFIG_IA64 gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */ diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index 16f8dca..7896849 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -248,19 +248,19 @@ xp_init(void) enum xp_retval ret; int ch_number; + /* initialize the connection registration mutex */ + for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) + mutex_init(&xpc_registrations[ch_number].mutex); + if (is_shub()) ret = xp_init_sn2(); else if (is_uv()) ret = xp_init_uv(); else - ret = xpUnsupported; + ret = 0; if (ret != xpSuccess) - return -ENODEV; - - /* initialize the connection registration mutex */ - for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) - mutex_init(&xpc_registrations[ch_number].mutex); + return ret; return 0; } -- cgit v0.10.2 From b298cecb3deddf76d60022473a57f1cb776cbdcd Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 21 Apr 2009 12:24:54 -0700 Subject: scsi: mpt: suppress debugobjects warning Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13133 ODEBUG: object is on stack, but not annotated ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:253 __debug_object_init+0x1f3/0x276() Hardware name: VMware Virtual Platform Modules linked in: mptspi(+) mptscsih mptbase scsi_transport_spi ext3 jbd mbcache Pid: 540, comm: insmod Not tainted 2.6.28-mm1 #2 Call Trace: [] warn_slowpath+0x74/0x8a [] ? start_critical_timing+0x96/0xb7 [] ? _spin_unlock_irqrestore+0x2f/0x3c [] ? trace_hardirqs_off_caller+0x18/0xaf [] ? trace_hardirqs_off+0xb/0xd [] ? _spin_unlock_irqrestore+0x2f/0x3c [] ? release_console_sem+0x1a5/0x1ad [] __debug_object_init+0x1f3/0x276 [] debug_object_init+0x13/0x17 [] init_timer+0x10/0x1a [] mpt_config+0x1c1/0x2b7 [mptbase] [] ? kmalloc+0x8/0xa [mptbase] [] ? kmalloc+0x8/0xa [mptbase] [] mpt_do_ioc_recovery+0x950/0x1212 [mptbase] [] ? __lock_acquire+0xa69/0xacc [] ? _spin_unlock_irqrestore+0x36/0x3c [] ? _spin_unlock_irq+0x22/0x26 [] ? string+0x2b/0x76 [] ? vsnprintf+0x338/0x7b3 [] ? __lock_acquire+0xa69/0xacc [] ? _spin_unlock_irqrestore+0x2f/0x3c [] ? __lock_acquire+0xa69/0xacc [] ? debug_check_no_locks_freed+0xeb/0x105 [] ? _spin_unlock_irqrestore+0x36/0x3c [] ? debug_check_no_locks_freed+0x2a/0x105 [] ? lock_release_holdtime+0x43/0x48 [] ? up_read+0x16/0x29 [] ? pci_get_slot+0x66/0x72 [] mpt_attach+0x881/0x9b1 [mptbase] [] mptspi_probe+0x11/0x354 [mptspi] Noticing that every caller of mpt_config has its CONFIGPARMS struct declared on the stack and thus the &pCfg->timer is always on the stack I changed init_timer() to init_timer_on_stack() and it seems to have shut up..... Cc: "Moore, Eric Dean" Cc: James Bottomley Cc: Thomas Gleixner Acked-by: "Desai, Kashyap" Cc: [2.6.29.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index d0d126c..5d496a9 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -5934,7 +5934,7 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) /* Initalize the timer */ - init_timer(&pCfg->timer); + init_timer_on_stack(&pCfg->timer); pCfg->timer.data = (unsigned long) ioc; pCfg->timer.function = mpt_timer_expired; pCfg->wait_done = 0; -- cgit v0.10.2 From 55e5750b3e979bac853c0809ad0ef75b7cebd18c Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 21 Apr 2009 12:24:56 -0700 Subject: edac: ppc mpc85xx fix mc err detect Error found by Jeff Haran. The error detect register is 0s when no errors are detected. The check code is incorrect, so reverse check sense. Reported-by: Jeff Haran Signed-off-by: Dave Jiang Signed-off-by: Doug Thompson Cc: Benjamin Herrenschmidt Acked-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 4637a4a..7c8c2d7 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -674,7 +674,7 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci) int row_index; err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT); - if (err_detect) + if (!err_detect) return; mpc85xx_mc_printk(mci, KERN_ERR, "Err Detect Register: %#8.8x\n", -- cgit v0.10.2 From 2e2e425989080cc534fc0fca154cae515f971cf5 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 21 Apr 2009 12:24:57 -0700 Subject: vmscan,memcg: reintroduce sc->may_swap Commit a6dc60f8975ad96d162915e07703a4439c80dcf0 ("vmscan: rename sc.may_swap to may_unmap") removed the may_swap flag, but memcg had used it as a flag for "we need to use swap?", as the name indicate. And in the current implementation, memcg cannot reclaim mapped file caches when mem+swap hits the limit. re-introduce may_swap flag and handle it at get_scan_ratio(). This patch doesn't influence any scan_control users other than memcg. Signed-off-by: KOSAKI Motohiro Signed-off-by: Daisuke Nishimura Acked-by: Johannes Weiner Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 99155b7..eac9577 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -63,6 +63,9 @@ struct scan_control { /* Can mapped pages be reclaimed? */ int may_unmap; + /* Can pages be swapped as part of reclaim? */ + int may_swap; + /* This context's SWAP_CLUSTER_MAX. If freeing memory for * suspend, we effectively ignore SWAP_CLUSTER_MAX. * In this context, it doesn't matter that we scan the @@ -1380,7 +1383,7 @@ static void get_scan_ratio(struct zone *zone, struct scan_control *sc, struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc); /* If we have no swap space, do not bother scanning anon pages. */ - if (nr_swap_pages <= 0) { + if (!sc->may_swap || (nr_swap_pages <= 0)) { percent[0] = 0; percent[1] = 100; return; @@ -1697,6 +1700,7 @@ unsigned long try_to_free_pages(struct zonelist *zonelist, int order, .may_writepage = !laptop_mode, .swap_cluster_max = SWAP_CLUSTER_MAX, .may_unmap = 1, + .may_swap = 1, .swappiness = vm_swappiness, .order = order, .mem_cgroup = NULL, @@ -1717,6 +1721,7 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, struct scan_control sc = { .may_writepage = !laptop_mode, .may_unmap = 1, + .may_swap = !noswap, .swap_cluster_max = SWAP_CLUSTER_MAX, .swappiness = swappiness, .order = 0, @@ -1726,9 +1731,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, }; struct zonelist *zonelist; - if (noswap) - sc.may_unmap = 0; - sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) | (GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK); zonelist = NODE_DATA(numa_node_id())->node_zonelists; @@ -1767,6 +1769,7 @@ static unsigned long balance_pgdat(pg_data_t *pgdat, int order) struct scan_control sc = { .gfp_mask = GFP_KERNEL, .may_unmap = 1, + .may_swap = 1, .swap_cluster_max = SWAP_CLUSTER_MAX, .swappiness = vm_swappiness, .order = order, @@ -2298,6 +2301,7 @@ static int __zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) struct scan_control sc = { .may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE), .may_unmap = !!(zone_reclaim_mode & RECLAIM_SWAP), + .may_swap = 1, .swap_cluster_max = max_t(unsigned long, nr_pages, SWAP_CLUSTER_MAX), .gfp_mask = gfp_mask, -- cgit v0.10.2 From daba0280fdebce0761088cf541d6e6dd7c232850 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 21 Apr 2009 12:24:58 -0700 Subject: bfin_5xx: misplaced parentheses `!' has a higher precedence than `&', parentheses are misplaced. Signed-off-by: Roel Kluin Cc: Alan Cox Acked-by: Sonic Zhang Cc: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 18ba812..d86123e 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -166,7 +166,7 @@ static void bfin_serial_start_tx(struct uart_port *port) struct tty_struct *tty = uart->port.info->port.tty; #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { uart->scts = 0; uart_handle_cts_change(&uart->port, uart->scts); } @@ -368,7 +368,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) struct bfin_serial_port *uart = dev_id; #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { uart->scts = 0; uart_handle_cts_change(&uart->port, uart->scts); } @@ -504,7 +504,7 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) struct circ_buf *xmit = &uart->port.info->xmit; #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { uart->scts = 0; uart_handle_cts_change(&uart->port, uart->scts); } -- cgit v0.10.2 From 4b6f764e148a194f792e75d43dc3504bc0d81064 Mon Sep 17 00:00:00 2001 From: Jay Sternberg Date: Mon, 20 Apr 2009 14:36:54 -0700 Subject: iwlwifi: fix EEPROM validation mask to include OTP only devices Fix the bug where some revisions of 6000 series hardware cannot be used. Later versions of 6000 series have the EEPROM replaced by OTP. For these devices to be used we need to expand valid EEPROM mask. Signed-off-by: Jay Sternberg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 2f12424..6e98314 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -223,7 +223,7 @@ #define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000) /* EEPROM GP */ -#define CSR_EEPROM_GP_VALID_MSK (0x00000006) +#define CSR_EEPROM_GP_VALID_MSK (0x00000007) #define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000) #define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) -- cgit v0.10.2 From 71d449b55abf5018d7c711b2b62abc0c083723c4 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 20 Apr 2009 14:37:01 -0700 Subject: iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll Users reported lockup with work still trying to run after module has been unloaded. http://thread.gmane.org/gmane.linux.kernel.wireless.general/30594/focus=30601 Signed-off-by: Reinette Chatre Reported-by: TJ Reported-by: Huaxu Wan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index da61ecd..1299479 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -5196,7 +5196,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); iwl_rfkill_unregister(priv); - cancel_delayed_work(&priv->rfkill_poll); + cancel_delayed_work_sync(&priv->rfkill_poll); iwl3945_dealloc_ucode_pci(priv); -- cgit v0.10.2 From 7d42081a271bd8a82f2100524085c4f029e47717 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 20 Apr 2009 15:36:19 -0700 Subject: mac80211: do not print WARN if config interface It is expected that config interface will always succeed as mac80211 will only request what driver supports. The exception here is when a device has rfkill enabled. At this time the rfkill state is unknown to mac80211 and config interface can fail. When this happens we deal with this error instead of printing a WARN. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 0273023..81985d2 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -156,8 +156,19 @@ int __ieee80211_resume(struct ieee80211_hw *hw) case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_AP: case NL80211_IFTYPE_MESH_POINT: - WARN_ON(ieee80211_if_config(sdata, changed)); - ieee80211_bss_info_change_notify(sdata, ~0); + /* + * Driver's config_interface can fail if rfkill is + * enabled. Accommodate this return code. + * FIXME: When mac80211 has knowledge of rfkill + * state the code below can change back to: + * WARN(ieee80211_if_config(sdata, changed)); + * ieee80211_bss_info_change_notify(sdata, ~0); + */ + if (ieee80211_if_config(sdata, changed)) + printk(KERN_DEBUG "%s: failed to configure interface during resume\n", + sdata->dev->name); + else + ieee80211_bss_info_change_notify(sdata, ~0); break; case NL80211_IFTYPE_WDS: break; -- cgit v0.10.2 From d1bcb9f1273adee6d2ce5edf84f19409a5cc31b9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2009 01:36:59 +0200 Subject: mac80211: fix alignment calculation bug When checking whether or not a given frame needs to be moved to be properly aligned to a 4-byte boundary, we use & 4 which wasn't intended, this code should check the lowest two bits. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 5fa7aed..9776f73 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1397,7 +1397,7 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx) * mac80211. That also explains the __skb_push() * below. */ - align = (unsigned long)skb->data & 4; + align = (unsigned long)skb->data & 3; if (align) { if (WARN_ON(skb_headroom(skb) < 3)) { dev_kfree_skb(skb); -- cgit v0.10.2 From c491bf1205485c83086bf4f2f26ca6598d48133a Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 21 Apr 2009 16:22:01 +0300 Subject: mwl8: fix build warning. This patch fixes a build warning in mwl8.c. (Marvell TOPDOG wireless driver) The warning it fixes is: "large integer implicitly truncated to unsigned type." The rx_ctrl member of the mwl8k_rx_desc struct is 8 bit (__u8 ), whereas trying to assign it a 32 bit value (which is returned from cpu_to_le32()) causes the compiler to issue a truncation warning. Signed-off-by: Rami Rosen Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index b5dbf6d..a9a9704 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -893,8 +893,7 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index) rx_desc->next_rx_desc_phys_addr = cpu_to_le32(rxq->rx_desc_dma + nexti * sizeof(*rx_desc)); - rx_desc->rx_ctrl = - cpu_to_le32(MWL8K_RX_CTRL_OWNED_BY_HOST); + rx_desc->rx_ctrl = MWL8K_RX_CTRL_OWNED_BY_HOST; } return 0; -- cgit v0.10.2 From d2ee9cd2e2bdfa2e5817142d6f044697066d3977 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Tue, 21 Apr 2009 10:55:47 -0700 Subject: iwlwifi: add debugging for TX path When debugging TX issues it is helpful to know the seq nr of the frame being transmitted. The seq nr is printed as part of ucode's log informing us which frame is being processed. Having this information printed in driver log makes it easy to match activities between driver and firmware. Also make possible to print TX flags directly. These are already printed as part of entire TX command, but having it printed directly in cpu format makes it easier to look at. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 1f117a4..8ef53e2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -875,8 +875,10 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq->need_update = 0; } + IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags)); iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); /* Set up entry for this TFD in Tx byte-count array */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 1299479..acefc37 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1146,8 +1146,10 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq->need_update = 0; } + IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags)); iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr, ieee80211_hdrlen(fc)); -- cgit v0.10.2 From df833b1d73680f9f9dc72cbc3215edbbc6ab740d Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Tue, 21 Apr 2009 10:55:48 -0700 Subject: iwlwifi: DMA fixes A few issues wrt DMA were uncovered when using the driver with swiotlb. - driver should not use memory after it has been mapped - iwl3945's RX queue management cannot use all of iwlagn because the size of the RX buffer is different. Revert back to using iwl3945 specific routines that map/unmap memory. - no need to "dma_syn_single_range_for_cpu" followed by pci_unmap_single, we can just call pci_unmap_single initially - only map the memory area that will be used by device. this is especially relevant to the mapping of iwl_cmd. we should not map the entire structure because the meta data at the beginning of structure contains the address to be used later for unmapping. If the address to be used for unmapping is stored in mapped data it creates a problem. - ensure that _if_ memory needs to be modified after it is mapped that we call _sync_single_for_cpu first, and then release it back to device with _sync_single_for_device - we mapped the wrong length of data for host commands, with mapped length differing with length provided to device, fix that. Thanks to Jason Andryuk for significant bisecting help to find these issues. This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1964 Signed-off-by: Reinette Chatre Tested-by: Jason Andryuk Tested-by: Ben Gamari Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 2399328..527525c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -1192,7 +1192,7 @@ int iwl3945_hw_nic_init(struct iwl_priv *priv) return -ENOMEM; } } else - iwl_rx_queue_reset(priv, rxq); + iwl3945_rx_queue_reset(priv, rxq); iwl3945_rx_replenish(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index ab7aaf6..5518884 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -215,6 +215,7 @@ extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm); extern int iwl3945_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int count, u32 id); extern void iwl3945_rx_replenish(void *data); +extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq); extern void iwl3945_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq); extern int iwl3945_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 3889158..1ef4192 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -976,11 +976,9 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - dma_sync_single_range_for_cpu( - &priv->pci_dev->dev, rxb->real_dma_addr, - rxb->aligned_dma_addr - rxb->real_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, + priv->hw_params.rx_buf_size + 256, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response @@ -1031,9 +1029,6 @@ void iwl_rx_handle(struct iwl_priv *priv) rxb->skb = NULL; } - pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, - priv->hw_params.rx_buf_size + 256, - PCI_DMA_FROMDEVICE); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &priv->rxq.rx_used); spin_unlock_irqrestore(&rxq->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index ec9a138..cf7f0db 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -360,12 +360,16 @@ struct iwl_host_cmd { /** * struct iwl_rx_queue - Rx queue + * @bd: driver's pointer to buffer of receive buffer descriptors (rbd) + * @dma_addr: bus address of buffer of receive buffer descriptors (rbd) * @read: Shared index to newest available Rx buffer * @write: Shared index to oldest written Rx packet * @free_count: Number of pre-allocated buffers in rx_free * @rx_free: list of free SKBs for use * @rx_used: List of Rx buffers with no SKB * @need_update: flag to indicate we need to update read/write index + * @rb_stts: driver's pointer to receive buffer status + * @rb_stts_dma: bus address of receive buffer status * * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers */ diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 8ef53e2..71d5b8a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -799,6 +799,22 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Copy MAC header from skb into command buffer */ memcpy(tx_cmd->hdr, hdr, hdr_len); + + /* Total # bytes to be transmitted */ + len = (u16)skb->len; + tx_cmd->len = cpu_to_le16(len); + + if (info->control.hw_key) + iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); + + /* TODO need this for burst mode later on */ + iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id); + + /* set is_hcca to 0; it probably will never be implemented */ + iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0); + + iwl_update_tx_stats(priv, le16_to_cpu(fc), len); + /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -819,21 +835,30 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) else len_org = 0; + /* Tell NIC about any 2-byte padding after MAC header */ + if (len_org) + tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; + /* Physical address of this Tx command's header (not MAC header!), * within command buffer array. */ txcmd_phys = pci_map_single(priv->pci_dev, - out_cmd, sizeof(struct iwl_cmd), + &out_cmd->hdr, len, PCI_DMA_BIDIRECTIONAL); pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys); - pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd)); + pci_unmap_len_set(&out_cmd->meta, len, len); /* Add buffer containing Tx command and MAC(!) header to TFD's * first entry */ - txcmd_phys += offsetof(struct iwl_cmd, hdr); priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, txcmd_phys, len, 1, 0); - if (info->control.hw_key) - iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + if (qc) + priv->stations[sta_id].tid[tid].seq_number = seq_number; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -846,35 +871,17 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) 0, 0); } - /* Tell NIC about any 2-byte padding after MAC header */ - if (len_org) - tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; - - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - tx_cmd->len = cpu_to_le16(len); - /* TODO need this for burst mode later on */ - iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id); - - /* set is_hcca to 0; it probably will never be implemented */ - iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0); - - iwl_update_tx_stats(priv, le16_to_cpu(fc), len); - scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) + - offsetof(struct iwl_tx_cmd, scratch); + offsetof(struct iwl_tx_cmd, scratch); + + len = sizeof(struct iwl_tx_cmd) + + sizeof(struct iwl_cmd_header) + hdr_len; + /* take back ownership of DMA buffer to enable update */ + pci_dma_sync_single_for_cpu(priv->pci_dev, txcmd_phys, + len, PCI_DMA_BIDIRECTIONAL); tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - if (qc) - priv->stations[sta_id].tid[tid].seq_number = seq_number; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", le16_to_cpu(out_cmd->hdr.sequence)); IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags)); @@ -882,7 +889,11 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); /* Set up entry for this TFD in Tx byte-count array */ - priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, len); + priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, + le16_to_cpu(tx_cmd->len)); + + pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys, + len, PCI_DMA_BIDIRECTIONAL); /* Tell device the write index *just past* this latest filled TFD */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); @@ -970,18 +981,9 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) INDEX_TO_SEQ(q->write_ptr)); if (out_cmd->meta.flags & CMD_SIZE_HUGE) out_cmd->hdr.sequence |= SEQ_HUGE_FRAME; - len = (idx == TFD_CMD_SLOTS) ? - IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); + len = sizeof(struct iwl_cmd) - sizeof(struct iwl_cmd_meta); + len += (idx == TFD_CMD_SLOTS) ? IWL_MAX_SCAN_SIZE : 0; - phys_addr = pci_map_single(priv->pci_dev, out_cmd, - len, PCI_DMA_BIDIRECTIONAL); - pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr); - pci_unmap_len_set(&out_cmd->meta, len, len); - phys_addr += offsetof(struct iwl_cmd, hdr); - - priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, - phys_addr, fix_size, 1, - U32_PAD(cmd->len)); #ifdef CONFIG_IWLWIFI_DEBUG switch (out_cmd->hdr.cmd) { @@ -1009,6 +1011,15 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) /* Set up entry in queue's byte count circular buffer */ priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0); + phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr, + fix_size, PCI_DMA_BIDIRECTIONAL); + pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr); + pci_unmap_len_set(&out_cmd->meta, len, fix_size); + + priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, + phys_addr, fix_size, 1, + U32_PAD(cmd->len)); + /* Increment and update queue's write index */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); ret = iwl_txq_update_write_ptr(priv, txq); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index acefc37..617c423 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -972,7 +972,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) dma_addr_t phys_addr; dma_addr_t txcmd_phys; int txq_id = skb_get_queue_mapping(skb); - u16 len, idx, len_org, hdr_len; + u16 len, idx, len_org, hdr_len; /* TODO: len_org is not used */ u8 id; u8 unicast; u8 sta_id; @@ -1074,6 +1074,40 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Copy MAC header from skb into command buffer */ memcpy(tx->hdr, hdr, hdr_len); + + if (info->control.hw_key) + iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id); + + /* TODO need this for burst mode later on */ + iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id); + + /* set is_hcca to 0; it probably will never be implemented */ + iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0); + + /* Total # bytes to be transmitted */ + len = (u16)skb->len; + tx->len = cpu_to_le16(len); + + + tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; + tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + if (qc) + priv->stations_39[sta_id].tid[tid].seq_number = seq_number; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } + + IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags)); + iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx)); + iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr, + ieee80211_hdrlen(fc)); + /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -1096,22 +1130,18 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Physical address of this Tx command's header (not MAC header!), * within command buffer array. */ - txcmd_phys = pci_map_single(priv->pci_dev, - out_cmd, sizeof(struct iwl_cmd), - PCI_DMA_TODEVICE); + txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr, + len, PCI_DMA_TODEVICE); + /* we do not map meta data ... so we can safely access address to + * provide to unmap command*/ pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys); - pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd)); - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - txcmd_phys += offsetof(struct iwl_cmd, hdr); + pci_unmap_len_set(&out_cmd->meta, len, len); /* Add buffer containing Tx command and MAC(!) header to TFD's * first entry */ priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, txcmd_phys, len, 1, 0); - if (info->control.hw_key) - iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id); /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -1124,34 +1154,6 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) 0, U32_PAD(len)); } - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - tx->len = cpu_to_le16(len); - - /* TODO need this for burst mode later on */ - iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id); - - /* set is_hcca to 0; it probably will never be implemented */ - iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0); - - tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; - tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; - - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - if (qc) - priv->stations_39[sta_id].tid[tid].seq_number = seq_number; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", - le16_to_cpu(out_cmd->hdr.sequence)); - IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags)); - iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr, - ieee80211_hdrlen(fc)); /* Tell device the write index *just past* this latest filled TFD */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); @@ -1663,6 +1665,37 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv) spin_unlock_irqrestore(&rxq->lock, flags); } +void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + unsigned long flags; + int i; + spin_lock_irqsave(&rxq->lock, flags); + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { + /* In the reset function, these buffers may have been allocated + * to an SKB, so we need to unmap and free potential storage */ + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + priv->alloc_rxb_skb--; + dev_kfree_skb(rxq->pool[i].skb); + rxq->pool[i].skb = NULL; + } + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + } + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->free_count = 0; + spin_unlock_irqrestore(&rxq->lock, flags); +} +EXPORT_SYMBOL(iwl3945_rx_queue_reset); + /* * this should be called while priv->lock is locked */ @@ -1687,6 +1720,34 @@ void iwl3945_rx_replenish(void *data) spin_unlock_irqrestore(&priv->lock, flags); } +/* Assumes that the skb field of the buffers in 'pool' is kept accurate. + * If an SKB has been detached, the POOL needs to have its SKB set to NULL + * This free routine walks the list of POOL entries and if SKB is set to + * non NULL it is unmapped and freed + */ +static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + int i; + for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(rxq->pool[i].skb); + } + } + + pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd, + rxq->dma_addr); + pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status), + rxq->rb_stts, rxq->rb_stts_dma); + rxq->bd = NULL; + rxq->rb_stts = NULL; +} +EXPORT_SYMBOL(iwl3945_rx_queue_free); + + /* Convert linear signal-to-noise ratio into dB */ static u8 ratio2dB[100] = { /* 0 1 2 3 4 5 6 7 8 9 */ @@ -1804,9 +1865,9 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->real_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response @@ -1854,9 +1915,6 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) rxb->skb = NULL; } - pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &priv->rxq.rx_used); spin_unlock_irqrestore(&rxq->lock, flags); @@ -5203,7 +5261,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) iwl3945_dealloc_ucode_pci(priv); if (priv->rxq.bd) - iwl_rx_queue_free(priv, &priv->rxq); + iwl3945_rx_queue_free(priv, &priv->rxq); iwl3945_hw_txq_ctx_free(priv); iwl3945_unset_hw_params(priv); -- cgit v0.10.2 From 778544e59857bed3f8c152e3c8755b12f7f3971f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 16:10:20 -0500 Subject: powerpc/85xx: Updated generic mpc85xx_defconfig Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index fb08819..6a3ea1a 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:37 2009 +# Linux kernel version: 2.6.30-rc2 +# Tue Apr 21 15:38:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,11 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -93,22 +105,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,10 +132,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,6 +146,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -142,7 +159,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,11 +174,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -178,6 +189,7 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y +# CONFIG_SOCRATES is not set CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y @@ -249,9 +261,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -278,6 +293,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -291,17 +307,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -389,6 +405,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -401,7 +418,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -456,13 +472,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -521,9 +544,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -546,6 +571,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -622,6 +648,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -655,6 +682,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -675,6 +704,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -685,11 +715,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_UCC_GETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -699,6 +731,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -708,6 +741,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -715,7 +749,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -885,12 +918,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -969,7 +999,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -978,6 +1008,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -1017,103 +1048,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1193,6 +1128,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1247,15 +1184,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1329,11 +1268,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1375,7 +1314,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1392,6 +1330,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1406,6 +1345,8 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y +# CONFIG_EDAC_AMD8131 is not set +# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1460,7 +1401,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set CONFIG_DMADEVICES=y # @@ -1473,7 +1414,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1484,6 +1427,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1508,6 +1452,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1562,6 +1511,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1577,7 +1527,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1648,6 +1597,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1662,11 +1612,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1684,6 +1635,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1714,9 +1668,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1724,17 +1681,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1765,10 +1725,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1837,6 +1799,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # -- cgit v0.10.2 From 8db3dca86e0a1b74b87ffb612f1e57c481a122b9 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 21 Apr 2009 15:40:51 -0500 Subject: powerpc/85xx: Enabled a bunch of FSL specific drivers/options * Add new 85xx boards * Added QE/FSL gpio * Enabled PHY drivers that exist on various boards * Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE) * FSL HW Crypto Engine * CPM I2C * QE Serial Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 6a3ea1a..c162724 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30-rc2 -# Tue Apr 21 15:38:23 2009 +# Tue Apr 21 15:40:23 2009 # # CONFIG_PPC64 is not set @@ -189,9 +189,9 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y -# CONFIG_SOCRATES is not set +CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_STX_GP3 is not set +CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y CONFIG_TQM8548=y @@ -212,11 +212,11 @@ CONFIG_PPC_I8259=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y -# CONFIG_QE_GPIO is not set +CONFIG_QE_GPIO=y CONFIG_CPM2=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y -# CONFIG_MPC8xxx_GPIO is not set +CONFIG_MPC8xxx_GPIO=y # CONFIG_SIMPLE_GPIO is not set # @@ -661,11 +661,11 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set +CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set @@ -674,7 +674,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -696,7 +696,10 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_ATL2 is not set -# CONFIG_FS_ENET is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FCC=y +# CONFIG_FS_ENET_MDIO_FCC is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -717,7 +720,9 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_UCC_GETH is not set +CONFIG_UCC_GETH=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -846,14 +851,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CPM is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_QE is not set +CONFIG_SERIAL_QE=m CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -890,7 +896,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_I2C_CPM is not set +CONFIG_I2C_CPM=m # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -1253,6 +1259,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set @@ -1597,6 +1604,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y # CONFIG_BINARY_PRINTF is not set # @@ -1719,6 +1729,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y @@ -1732,7 +1743,7 @@ CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # @@ -1808,7 +1819,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_CRYPTO_DEV_TALITOS=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 3de0e075486cc1a175d63bb7167bfc66e9ac16f4 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 16:33:08 -0500 Subject: powerpc/85xx: Added SMP defconfig Since the vast majority of 85xx platforms are UP we introduce a new SMP config for the few platforms that have more than one core. Beyond CONFIG_SMP=y and its dependencies this should be identical to mpc85xx_defconfig. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig new file mode 100644 index 0000000..1aa1c50 --- /dev/null +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -0,0 +1,1829 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Tue Apr 21 15:41:18 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_E500=y +# CONFIG_PPC_E500MC is not set +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y +CONFIG_MPC8540_ADS=y +CONFIG_MPC8560_ADS=y +CONFIG_MPC85xx_CDS=y +CONFIG_MPC85xx_MDS=y +CONFIG_MPC8536_DS=y +CONFIG_MPC85xx_DS=y +CONFIG_SOCRATES=y +CONFIG_KSI8560=y +CONFIG_STX_GP3=y +CONFIG_TQM8540=y +CONFIG_TQM8541=y +CONFIG_TQM8548=y +CONFIG_TQM8555=y +CONFIG_TQM8560=y +CONFIG_SBC8548=y +# CONFIG_SBC8560 is not set +CONFIG_TQM85xx=y +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +CONFIG_PPC_I8259=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y +CONFIG_CPM2=y +CONFIG_FSL_ULI1575=y +CONFIG_CPM=y +CONFIG_MPC8xxx_GPIO=y +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +CONFIG_HIGHMEM=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +CONFIG_PATA_ALI=y +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FCC=y +# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y +CONFIG_GIANFAR=y +CONFIG_UCC_GETH=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_QE=m +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_NVRAM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_CPM=m +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y + +# +# Supported SAA7146 based PCI Adapters +# +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_BUDGET_CORE is not set + +# +# Supported USB Adapters +# +# CONFIG_DVB_USB is not set +# CONFIG_DVB_TTUSB_BUDGET is not set +# CONFIG_DVB_TTUSB_DEC is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported BT878 Adapters +# + +# +# Supported Pluto2 Adapters +# +# CONFIG_DVB_PLUTO2 is not set + +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +CONFIG_SND_INTEL8X0=y +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_PPC=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y +# CONFIG_EDAC_AMD8131 is not set +# CONFIG_EDAC_AMD8111 is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_FSL_DMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +CONFIG_VXFS_FS=m +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +# CONFIG_ROMFS_FS is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +CONFIG_VIRQ_DEBUG=y +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_CRYPTO_DEV_TALITOS=y +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 0658c16056660886ea2f35c4f038be70a94b1532 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 16:48:50 -0500 Subject: powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig deleted file mode 100644 index e31b6a4..0000000 --- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig +++ /dev/null @@ -1,1802 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:04 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -CONFIG_MPC8536_DS=y -# CONFIG_MPC85xx_DS is not set -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=524288 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -# CONFIG_SATA_AHCI is not set -CONFIG_SATA_SIL24=y -CONFIG_SATA_FSL=y -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -CONFIG_SKGE=y -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKY2=y -# CONFIG_SKY2_DEBUG is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -CONFIG_FSL_DMA=y -CONFIG_DMA_ENGINE=y - -# -# DMA Clients -# -# CONFIG_NET_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_VIRQ_DEBUG is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig deleted file mode 100644 index f6fa0b7..0000000 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ /dev/null @@ -1,1802 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:07 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8536_DS is not set -CONFIG_MPC85xx_DS=y -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -CONFIG_FSL_ULI1575=y -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -CONFIG_SATA_AHCI=y -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_PATA_ALI=y -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -CONFIG_FSL_DMA=y -CONFIG_DMA_ENGINE=y - -# -# DMA Clients -# -# CONFIG_NET_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig deleted file mode 100644 index 186c101..0000000 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ /dev/null @@ -1,1309 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:10 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -CONFIG_MPC85xx_MDS=y -# CONFIG_MPC8536_DS is not set -# CONFIG_MPC85xx_DS is not set -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -CONFIG_QUICC_ENGINE=y -# CONFIG_QE_GPIO is not set -# CONFIG_CPM2 is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -# CONFIG_BLK_DEV_SD is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_UCC_GETH is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_QE is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_BOOKE_WDT is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set -# CONFIG_HID_PID is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -CONFIG_RTC_DRV_DS1374=y -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -CONFIG_PPC_EARLY_DEBUG=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set -# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set -# CONFIG_PPC_EARLY_DEBUG_BEAT is not set -# CONFIG_PPC_EARLY_DEBUG_44x is not set -# CONFIG_PPC_EARLY_DEBUG_40x is not set -# CONFIG_PPC_EARLY_DEBUG_CPM is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=m -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_LIB_RHEAP=y -# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig deleted file mode 100644 index 813223a..0000000 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ /dev/null @@ -1,1794 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:12 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -CONFIG_GENERIC_TBSYNC=y -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_STOP_MACHINE=y -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8536_DS is not set -CONFIG_MPC85xx_DS=y -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -CONFIG_FSL_ULI1575=y -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -# CONFIG_IRQ_ALL_CPUS is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -CONFIG_SATA_AHCI=y -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_PATA_ALI=y -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 5d1af5c83232c5a02b9dc0fe43053b4ddc005224 Mon Sep 17 00:00:00 2001 From: Miroslaw Walukiewicz Date: Tue, 21 Apr 2009 16:16:48 -0700 Subject: RDMA/nes: Fix resource issues in nes_create_cq() and nes_destroy_cq() In error paths where a CQ is not created, pbl is not freeed properly. In nes_destroy_cq(), add the corresponding check for nescq->mcrqf to not call nes_free_resource() when it is already done in nes_create_cq(). Signed-off-by: Miroslaw Walukiewicz Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 504e31d..8b460c2 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1627,6 +1627,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff; else nescq->hw_cq.cq_number = nesvnic->mcrq_qp_id + nes_ucontext->mcrqf-1; + nescq->mcrqf = nes_ucontext->mcrqf; nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num); } nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n", @@ -1682,6 +1683,12 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, if (!context) pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem, nescq->hw_cq.cq_pbase); + else { + pci_free_consistent(nesdev->pcidev, nespbl->pbl_size, + nespbl->pbl_vbase, nespbl->pbl_pbase); + kfree(nespbl); + } + nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num); kfree(nescq); return ERR_PTR(-ENOMEM); @@ -1705,6 +1712,11 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, if (!context) pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem, nescq->hw_cq.cq_pbase); + else { + pci_free_consistent(nesdev->pcidev, nespbl->pbl_size, + nespbl->pbl_vbase, nespbl->pbl_pbase); + kfree(nespbl); + } nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num); kfree(nescq); return ERR_PTR(-ENOMEM); @@ -1722,6 +1734,11 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, if (!context) pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem, nescq->hw_cq.cq_pbase); + else { + pci_free_consistent(nesdev->pcidev, nespbl->pbl_size, + nespbl->pbl_vbase, nespbl->pbl_pbase); + kfree(nespbl); + } nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num); kfree(nescq); return ERR_PTR(-ENOMEM); @@ -1774,6 +1791,11 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, if (!context) pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem, nescq->hw_cq.cq_pbase); + else { + pci_free_consistent(nesdev->pcidev, nespbl->pbl_size, + nespbl->pbl_vbase, nespbl->pbl_pbase); + kfree(nespbl); + } nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num); kfree(nescq); return ERR_PTR(-EIO); @@ -1855,7 +1877,9 @@ static int nes_destroy_cq(struct ib_cq *ib_cq) set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_OPCODE_IDX, opcode); set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX, (nescq->hw_cq.cq_number | ((u32)PCI_FUNC(nesdev->pcidev->devfn) << 16))); - nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number); + if (!nescq->mcrqf) + nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number); + atomic_set(&cqp_request->refcount, 2); nes_post_cqp_request(nesdev, cqp_request); diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h index 5e48f67..41c07f2 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.h +++ b/drivers/infiniband/hw/nes/nes_verbs.h @@ -112,6 +112,7 @@ struct nes_cq { spinlock_t lock; u8 virtual_cq; u8 pad[3]; + u32 mcrqf; }; struct nes_wq { -- cgit v0.10.2 From 0fba813748f16f4eaf24d492c505226c4026d58f Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 19 Mar 2009 05:08:43 +0800 Subject: ocfs2: Fix 2 warning during ocfs2 make. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fs/ocfs2/dir.c: In function ‘ocfs2_extend_dir’: fs/ocfs2/dir.c:2700: warning: ‘ret’ may be used uninitialized in this function fs/ocfs2/suballoc.c: In function ‘ocfs2_get_suballoc_slot_bit’: fs/ocfs2/suballoc.c:2216: warning: comparison is always true due to limited range of data type Signed-off-by: Tao Ma Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index 07d8920..c575230 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -2697,7 +2697,7 @@ static int ocfs2_dx_dir_index_block(struct inode *dir, u32 *num_dx_entries, struct buffer_head *dirent_bh) { - int ret, namelen, i; + int ret = 0, namelen, i; char *de_buf, *limit; struct ocfs2_dir_entry *de; struct buffer_head *dx_leaf_bh; diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index b4ca591..eb21dbb 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -2213,7 +2213,7 @@ static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno, goto bail; } - if (le16_to_cpu(inode_fe->i_suballoc_slot) != OCFS2_INVALID_SLOT && + if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT && (u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) { mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n", blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot)); -- cgit v0.10.2 From 5b09b507daaa882d888b6cd78ee89ba9caace44b Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Tue, 21 Apr 2009 16:31:20 -0700 Subject: ocfs2: Fix some printk() warnings. The old %llu vs u64 battle. Cast them correctly. Signed-off-by: Joel Becker diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c index de3da8e..15713cb 100644 --- a/fs/ocfs2/export.c +++ b/fs/ocfs2/export.c @@ -100,7 +100,8 @@ static struct dentry *ocfs2_get_dentry(struct super_block *sb, /* If the inode allocator bit is clear, this inode must be stale */ if (!set) { - mlog(0, "inode %llu suballoc bit is clear\n", blkno); + mlog(0, "inode %llu suballoc bit is clear\n", + (unsigned long long)blkno); status = -ESTALE; goto unlock_nfs_sync; } @@ -114,7 +115,7 @@ check_err: if (status < 0) { if (status == -ESTALE) { mlog(0, "stale inode ino: %llu generation: %u\n", - blkno, handle->ih_generation); + (unsigned long long)blkno, handle->ih_generation); } result = ERR_PTR(status); goto bail; @@ -129,8 +130,8 @@ check_err: check_gen: if (handle->ih_generation != inode->i_generation) { iput(inode); - mlog(0, "stale inode ino: %llu generation: %u\n", blkno, - handle->ih_generation); + mlog(0, "stale inode ino: %llu generation: %u\n", + (unsigned long long)blkno, handle->ih_generation); result = ERR_PTR(-ESTALE); goto bail; } diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index eb21dbb..8439f6b 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -2197,18 +2197,20 @@ static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno, struct buffer_head *inode_bh = NULL; struct ocfs2_dinode *inode_fe; - mlog_entry("blkno: %llu\n", blkno); + mlog_entry("blkno: %llu\n", (unsigned long long)blkno); /* dirty read disk */ status = ocfs2_read_blocks_sync(osb, blkno, 1, &inode_bh); if (status < 0) { - mlog(ML_ERROR, "read block %llu failed %d\n", blkno, status); + mlog(ML_ERROR, "read block %llu failed %d\n", + (unsigned long long)blkno, status); goto bail; } inode_fe = (struct ocfs2_dinode *) inode_bh->b_data; if (!OCFS2_IS_VALID_DINODE(inode_fe)) { - mlog(ML_ERROR, "invalid inode %llu requested\n", blkno); + mlog(ML_ERROR, "invalid inode %llu requested\n", + (unsigned long long)blkno); status = -EINVAL; goto bail; } @@ -2216,7 +2218,8 @@ static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno, if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT && (u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) { mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n", - blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot)); + (unsigned long long)blkno, + (u32)le16_to_cpu(inode_fe->i_suballoc_slot)); status = -EINVAL; goto bail; } @@ -2251,7 +2254,8 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb, u64 bg_blkno; int status; - mlog_entry("blkno: %llu bit: %u\n", blkno, (unsigned int)bit); + mlog_entry("blkno: %llu bit: %u\n", (unsigned long long)blkno, + (unsigned int)bit); alloc_fe = (struct ocfs2_dinode *)alloc_bh->b_data; if ((bit + 1) > ocfs2_bits_per_group(&alloc_fe->id2.i_chain)) { @@ -2266,7 +2270,8 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb, status = ocfs2_read_group_descriptor(suballoc, alloc_fe, bg_blkno, &group_bh); if (status < 0) { - mlog(ML_ERROR, "read group %llu failed %d\n", bg_blkno, status); + mlog(ML_ERROR, "read group %llu failed %d\n", + (unsigned long long)bg_blkno, status); goto bail; } @@ -2300,7 +2305,7 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res) struct inode *inode_alloc_inode; struct buffer_head *alloc_bh = NULL; - mlog_entry("blkno: %llu", blkno); + mlog_entry("blkno: %llu", (unsigned long long)blkno); status = ocfs2_get_suballoc_slot_bit(osb, blkno, &suballoc_slot, &suballoc_bit); -- cgit v0.10.2 From 72021788678523047161e97b3dfed695e802a5fd Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 17 Nov 2008 13:58:11 +0800 Subject: drm/i915: add support for G41 chipset This had been delayed for some time due to failure to work on the one piece of G41 hardware we had, and lack of success reports from anybody else. Current hardware appears to be OK. Signed-off-by: Zhenyu Wang [anholt: hand-applied due to conflicts with IGD patches] Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d7471fe..2506592 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -787,7 +787,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); (dev)->pci_device == 0x2A42 || \ (dev)->pci_device == 0x2E02 || \ (dev)->pci_device == 0x2E12 || \ - (dev)->pci_device == 0x2E22) + (dev)->pci_device == 0x2E22 || \ + (dev)->pci_device == 0x2E32) #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) @@ -796,6 +797,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \ (dev)->pci_device == 0x2E12 || \ (dev)->pci_device == 0x2E22 || \ + (dev)->pci_device == 0x2E32 || \ IS_GM45(dev)) #define IS_IGDG(dev) ((dev)->pci_device == 0xa001) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 9477af0..fc55db7 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -532,6 +532,7 @@ {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2e32, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ -- cgit v0.10.2 From d816f6ac4f9877509baa3610be0d25b7afc29c00 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Sat, 18 Apr 2009 10:43:32 +0800 Subject: drm/i915: fix unpaired i915 device mutex on entervt failure. Signed-off-by: Wu Fengguang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 4642115..ee896d9 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4087,8 +4087,10 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data, dev_priv->mm.suspended = 0; ret = i915_gem_init_ringbuffer(dev); - if (ret != 0) + if (ret != 0) { + mutex_unlock(&dev->struct_mutex); return ret; + } spin_lock(&dev_priv->mm.active_list_lock); BUG_ON(!list_empty(&dev_priv->mm.active_list)); -- cgit v0.10.2 From 355d7f370b51bbb6f31aaf9f98861057e1e6bbb2 Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Fri, 17 Apr 2009 01:18:55 +0000 Subject: drm/i915: fix up error path leak in i915_cmdbuffer Commit 201361a5 introduces a leak when unwinding on error. Reorder unwind, and eliminate leak. Cc: Eric Anholt Cc: Keith Packard Cc: Jesse Barnes Signed-off-by: Chris Wright [anholt: fixed uninit variable use introduced in original patch] Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 27261438..051134c 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -713,18 +713,18 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, mutex_unlock(&dev->struct_mutex); if (ret) { DRM_ERROR("i915_dispatch_cmdbuffer failed\n"); - goto fail_batch_free; + goto fail_clip_free; } if (sarea_priv) sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); -fail_batch_free: - drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER); fail_clip_free: drm_free(cliprects, cmdbuf->num_cliprects * sizeof(struct drm_clip_rect), DRM_MEM_DRIVER); +fail_batch_free: + drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER); return ret; } -- cgit v0.10.2 From 2a3313f494c2f3f74a27d66f0f14b38558b7dba2 Mon Sep 17 00:00:00 2001 From: "Michael K. Johnson" Date: Tue, 21 Apr 2009 21:44:48 -0400 Subject: x86: more than 8 32-bit CPUs requires X86_BIGSMP $ cat x86-more-than-8-cpus-requires-bigsmp.patch Enforce NR_CPUS <= 8 limitation if X86_BIGSMP not set Configuring more than 8 logical CPUs on 32-bit x86 requires X86_BIGSMP to be set in order to boot successfully, if more than 8 logical CPUs are actually found at boot time. The X86_BIGSMP help text describes that it is required to be set if more than 8 CPUs are configured, but this was previously not enforced. This configuration error has affected multiple distributions: https://bugzilla.redhat.com/show_bug.cgi?id=480844 https://issues.rpath.com/browse/RPL-3022 Signed-off-by: Michael K Johnson LKML-Reference: <20090422014448.GB32541@logo.rdu.rpath.com> Signed-off-by: H. Peter Anvin diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c9086e6..b5cda6c 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -664,6 +664,7 @@ config MAXSMP config NR_CPUS int "Maximum number of CPUs" if SMP && !MAXSMP + range 2 8 if SMP && X86_32 && !X86_BIGSMP range 2 512 if SMP && !MAXSMP default "1" if !SMP default "4096" if MAXSMP -- cgit v0.10.2 From 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Apr 2009 23:00:24 +0100 Subject: FRV: Fix the section attribute on UP DECLARE_PER_CPU() In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU() does not agree with that specified by DEFINE_PER_CPU(). This means that architectures that have a small data section references relative to a base register may throw up linkage errors due to too great a displacement between where the base register points and the per-CPU variable. On FRV, the .h declaration says that the variable is in the .sdata section, but the .c definition says it's actually in the .data section. The linker throws up the following errors: kernel/built-in.o: In function `release_task': kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o To fix this, DECLARE_PER_CPU() should simply apply the same section attribute as does DEFINE_PER_CPU(). However, this is made slightly more complex by virtue of the fact that there are several variants on DEFINE, so these need to be matched by variants on DECLARE. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h index 3495e8e..e9e0bb5 100644 --- a/arch/alpha/include/asm/percpu.h +++ b/arch/alpha/include/asm/percpu.h @@ -73,6 +73,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #endif /* SMP */ -#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name) +#include #endif /* __ALPHA_PERCPU_H */ diff --git a/arch/ia64/include/asm/smp.h b/arch/ia64/include/asm/smp.h index 5984083..d217d1d 100644 --- a/arch/ia64/include/asm/smp.h +++ b/arch/ia64/include/asm/smp.h @@ -58,7 +58,7 @@ extern struct smp_boot_data { extern char no_int_routing __devinitdata; extern cpumask_t cpu_core_map[NR_CPUS]; -DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); +DECLARE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map); extern int smp_num_siblings; extern void __iomem *ipi_base_addr; extern unsigned char smp_int_redirect; diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index 5623c50..c45f415 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -37,7 +37,7 @@ extern gate_desc idt_table[]; struct gdt_page { struct desc_struct gdt[GDT_ENTRIES]; } __attribute__((aligned(PAGE_SIZE))); -DECLARE_PER_CPU(struct gdt_page, gdt_page); +DECLARE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page); static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu) { diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h index 039db6a..37555e5 100644 --- a/arch/x86/include/asm/hardirq.h +++ b/arch/x86/include/asm/hardirq.h @@ -26,7 +26,7 @@ typedef struct { #endif } ____cacheline_aligned irq_cpustat_t; -DECLARE_PER_CPU(irq_cpustat_t, irq_stat); +DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); /* We can have at most NR_VECTORS irqs routed to a cpu at a time */ #define MAX_HARDIRQS_PER_CPU NR_VECTORS diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index fcf4d92..c2cceae 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -138,7 +138,7 @@ extern struct tss_struct doublefault_tss; extern __u32 cleared_cpu_caps[NCAPINTS]; #ifdef CONFIG_SMP -DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info); +DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info); #define cpu_data(cpu) per_cpu(cpu_info, cpu) #define current_cpu_data __get_cpu_var(cpu_info) #else @@ -270,7 +270,7 @@ struct tss_struct { } ____cacheline_aligned; -DECLARE_PER_CPU(struct tss_struct, init_tss); +DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss); /* * Save the original ist values for checking stack pointers during debugging @@ -393,7 +393,7 @@ union irq_stack_union { }; }; -DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); +DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union); DECLARE_INIT_PER_CPU(irq_stack_union); DECLARE_PER_CPU(char *, irq_stack_ptr); diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index d3539f9..16a5c84 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -152,7 +152,7 @@ struct tlb_state { struct mm_struct *active_mm; int state; }; -DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate); +DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); static inline void reset_lazy_tlbstate(void) { diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index b0e63c6..af47b9e 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -73,11 +73,50 @@ extern void setup_per_cpu_areas(void); #endif /* SMP */ +#ifndef PER_CPU_BASE_SECTION +#ifdef CONFIG_SMP +#define PER_CPU_BASE_SECTION ".data.percpu" +#else +#define PER_CPU_BASE_SECTION ".data" +#endif +#endif + +#ifdef CONFIG_SMP + +#ifdef MODULE +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#else +#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" +#endif +#define PER_CPU_FIRST_SECTION ".first" + +#else + +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#define PER_CPU_FIRST_SECTION "" + +#endif + #ifndef PER_CPU_ATTRIBUTES #define PER_CPU_ATTRIBUTES #endif -#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \ - __typeof__(type) per_cpu_var(name) +#define DECLARE_PER_CPU_SECTION(type, name, section) \ + extern \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +#define DECLARE_PER_CPU(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, "") + +#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") + +#define DECLARE_PER_CPU_FIRST(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) #endif /* _ASM_GENERIC_PERCPU_H_ */ diff --git a/include/linux/percpu.h b/include/linux/percpu.h index cfda2d5..f052d81 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -9,30 +9,6 @@ #include -#ifndef PER_CPU_BASE_SECTION -#ifdef CONFIG_SMP -#define PER_CPU_BASE_SECTION ".data.percpu" -#else -#define PER_CPU_BASE_SECTION ".data" -#endif -#endif - -#ifdef CONFIG_SMP - -#ifdef MODULE -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#else -#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" -#endif -#define PER_CPU_FIRST_SECTION ".first" - -#else - -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#define PER_CPU_FIRST_SECTION "" - -#endif - #define DEFINE_PER_CPU_SECTION(type, name, section) \ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name diff --git a/net/rds/rds.h b/net/rds/rds.h index 619f0a3..7179444 100644 --- a/net/rds/rds.h +++ b/net/rds/rds.h @@ -638,7 +638,7 @@ struct rds_message *rds_send_get_message(struct rds_connection *, void rds_rdma_unuse(struct rds_sock *rs, u32 r_key, int force); /* stats.c */ -DECLARE_PER_CPU(struct rds_statistics, rds_stats); +DECLARE_PER_CPU_SHARED_ALIGNED(struct rds_statistics, rds_stats); #define rds_stats_inc_which(which, member) do { \ per_cpu(which, get_cpu()).member++; \ put_cpu(); \ -- cgit v0.10.2 From 5028eaa97dd1dab9cd7c30c4d38f71c708ca64bc Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Apr 2009 23:00:29 +0100 Subject: PERCPU: Collect the DECLARE/DEFINE declarations together Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so that they're in one place, and give them descriptive comments, particularly the SHARED_ALIGNED variant. It would be nice to collect these in linux/percpu.h, but that's not possible without sorting out the severe #include recursion between the x86 arch headers and the general headers (and possibly other arches too). Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index af47b9e..d7d50d7 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -1,13 +1,9 @@ #ifndef _ASM_GENERIC_PERCPU_H_ #define _ASM_GENERIC_PERCPU_H_ + #include #include - -/* - * Determine the real variable name from the name visible in the - * kernel sources. - */ -#define per_cpu_var(var) per_cpu__##var +#include #ifdef CONFIG_SMP @@ -101,22 +97,4 @@ extern void setup_per_cpu_areas(void); #define PER_CPU_ATTRIBUTES #endif -#define DECLARE_PER_CPU_SECTION(type, name, section) \ - extern \ - __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name - -#define DECLARE_PER_CPU(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, "") - -#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ - ____cacheline_aligned_in_smp - -#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") - -#define DECLARE_PER_CPU_FIRST(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) - #endif /* _ASM_GENERIC_PERCPU_H_ */ diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h new file mode 100644 index 0000000..8f921d7 --- /dev/null +++ b/include/linux/percpu-defs.h @@ -0,0 +1,84 @@ +#ifndef _LINUX_PERCPU_DEFS_H +#define _LINUX_PERCPU_DEFS_H + +/* + * Determine the real variable name from the name visible in the + * kernel sources. + */ +#define per_cpu_var(var) per_cpu__##var + +/* + * Base implementations of per-CPU variable declarations and definitions, where + * the section in which the variable is to be placed is provided by the + * 'section' argument. This may be used to affect the parameters governing the + * variable's storage. + * + * NOTE! The sections for the DECLARE and for the DEFINE must match, lest + * linkage errors occur due the compiler generating the wrong code to access + * that section. + */ +#define DECLARE_PER_CPU_SECTION(type, name, section) \ + extern \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +#define DEFINE_PER_CPU_SECTION(type, name, section) \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +/* + * Variant on the per-CPU variable declaration/definition theme used for + * ordinary per-CPU variables. + */ +#define DECLARE_PER_CPU(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, "") + +#define DEFINE_PER_CPU(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, "") + +/* + * Declaration/definition used for per-CPU variables that must come first in + * the set of variables. + */ +#define DECLARE_PER_CPU_FIRST(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) + +#define DEFINE_PER_CPU_FIRST(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) + +/* + * Declaration/definition used for per-CPU variables that must be cacheline + * aligned under SMP conditions so that, whilst a particular instance of the + * data corresponds to a particular CPU, inefficiencies due to direct access by + * other CPUs are reduced by preventing the data from unnecessarily spanning + * cachelines. + * + * An example of this would be statistical data, where each CPU's set of data + * is updated by that CPU alone, but the data from across all CPUs is collated + * by a CPU processing a read from a proc file. + */ +#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +/* + * Declaration/definition used for per-CPU variables that must be page aligned. + */ +#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") + +#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") + +/* + * Intermodule exports for per-CPU variables. + */ +#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var) +#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var) + + +#endif /* _LINUX_PERCPU_DEFS_H */ diff --git a/include/linux/percpu.h b/include/linux/percpu.h index f052d81..1581ff2 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -9,26 +9,6 @@ #include -#define DEFINE_PER_CPU_SECTION(type, name, section) \ - __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name - -#define DEFINE_PER_CPU(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, "") - -#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ - ____cacheline_aligned_in_smp - -#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") - -#define DEFINE_PER_CPU_FIRST(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) - -#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var) -#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var) - /* enough to cover all DEFINE_PER_CPUs in modules */ #ifdef CONFIG_MODULES #define PERCPU_MODULE_RESERVE (8 << 10) -- cgit v0.10.2 From 5dd559f020c98a2a4b3e063f09c0e4bc771ed838 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Tue, 21 Apr 2009 16:30:32 -0600 Subject: Trivial: fix a typo in slow-work.h Fix a comment typo in slow-work.h ...a trivial mistake, but it will mess up kerneldoc if nothing else. Signed-off-by: Jonathan Corbet Signed-off-by: Linus Torvalds diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index 8595827..b65c888 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -67,7 +67,7 @@ static inline void slow_work_init(struct slow_work *work, } /** - * slow_work_init - Initialise a very slow work item + * vslow_work_init - Initialise a very slow work item * @work: The work item to initialise * @ops: The operations to use to handle the slow work item * -- cgit v0.10.2 From d4d5291c8cd499b1b590336059d5cc3e24c1ced6 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 21 Apr 2009 13:32:54 -0700 Subject: driver synchronization: make scsi_wait_scan more advanced There is currently only one way for userspace to say "wait for my storage device to get ready for the modules I just loaded": to load the scsi_wait_scan module. Expectations of userspace are that once this module is loaded, all the (storage) devices for which the drivers were loaded before the module load are present. Now, there are some issues with the implementation, and the async stuff got caught in the middle of this: The existing code only waits for the scsy async probing to finish, but it did not take into account at all that probing might not have begun yet. (Russell ran into this problem on his computer and the fix works for him) This patch fixes this more thoroughly than the previous "fix", which had some bad side effects (namely, for kernel code that wanted to wait for the scsi scan it would also do an async sync, which would deadlock if you did it from async context already.. there's a report about that on lkml): The patch makes the module first wait for all device driver probes, and then it will wait for the scsi parallel scan to finish. Signed-off-by: Arjan van de Ven Tested-by: Russell King Signed-off-by: Linus Torvalds diff --git a/drivers/base/dd.c b/drivers/base/dd.c index f17c326..742cbe6 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -179,6 +179,7 @@ void wait_for_device_probe(void) wait_event(probe_waitqueue, atomic_read(&probe_count) == 0); async_synchronize_full(); } +EXPORT_SYMBOL_GPL(wait_for_device_probe); /** * driver_probe_device - attempt to bind device & driver together diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index a14d245..6f51ca4 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -180,8 +180,6 @@ int scsi_complete_async_scans(void) spin_unlock(&async_scan_lock); kfree(data); - /* Synchronize async operations globally */ - async_synchronize_full(); return 0; } diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c index 2f21af2..74708fc 100644 --- a/drivers/scsi/scsi_wait_scan.c +++ b/drivers/scsi/scsi_wait_scan.c @@ -11,10 +11,21 @@ */ #include +#include #include static int __init wait_scan_init(void) { + /* + * First we need to wait for device probing to finish; + * the drivers we just loaded might just still be probing + * and might not yet have reached the scsi async scanning + */ + wait_for_device_probe(); + /* + * and then we wait for the actual asynchronous scsi scan + * to finish. + */ scsi_complete_async_scans(); return 0; } diff --git a/include/linux/device.h b/include/linux/device.h index 2918c0e..6a69caa 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -551,6 +551,7 @@ extern int (*platform_notify_remove)(struct device *dev); extern struct device *get_device(struct device *dev); extern void put_device(struct device *dev); +extern void wait_for_device_probe(void); /* drivers/base/power/shutdown.c */ extern void device_shutdown(void); -- cgit v0.10.2 From 091069740304c979f957ceacec39c461d0192158 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Apr 2009 20:07:00 -0700 Subject: Linux 2.6.30-rc3 diff --git a/Makefile b/Makefile index 6f4208f..9e5dc8f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Temporary Tasmanian Devil # *DOCUMENTATION* -- cgit v0.10.2 From 592578a1dd1be0c940e36f769acdd3cc6651a7a1 Mon Sep 17 00:00:00 2001 From: Richard Retanubun Date: Wed, 8 Apr 2009 11:51:27 +1000 Subject: m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC. This processor only have one FEC and its MDIO pins are located at a different offset than the code used for the current CONFIG_M527x. Tesed on M5271EVB eval platform. Without this patch the FEC driver will report no PHY attached if the bootloader does not pre-initialize the PAR_FECI2C GPIO register. Signed-off-by: Richard Retanubun Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c index 49343fb..428b159 100644 --- a/arch/m68knommu/platform/527x/config.c +++ b/arch/m68knommu/platform/527x/config.c @@ -189,10 +189,15 @@ static void __init m527x_fec_init(void) m527x_fec_irq_init(0); /* Set multi-function pins to ethernet mode for fec0 */ +#if defined(CONFIG_M5271) + v = readb(MCF_IPSBAR + 0x100047); + writeb(v | 0xf0, MCF_IPSBAR + 0x100047); +#else par = readw(MCF_IPSBAR + 0x100082); writew(par | 0xf00, MCF_IPSBAR + 0x100082); v = readb(MCF_IPSBAR + 0x100078); writeb(v | 0xc0, MCF_IPSBAR + 0x100078); +#endif #ifdef CONFIG_FEC2 m527x_fec_irq_init(1); -- cgit v0.10.2 From a14f5e4feb3efd907df7f1b176c2367910a8e796 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 17 Apr 2009 22:55:06 +1000 Subject: m68knommu: fix missing .data.cacheline_aligned section Add a .data.cacheline_aligned section to the data segment. Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 69ba9b1..b7fe505 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -147,6 +147,8 @@ SECTIONS { . = ALIGN(4); _sdata = . ; DATA_DATA + . = ALIGN(32); + *(.data.cacheline_aligned) . = ALIGN(8192) ; *(.data.init_task) _edata = . ; -- cgit v0.10.2 From 830c072b1ea0078396c42db120452fc36516ed1d Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 17 Apr 2009 22:56:50 +1000 Subject: m68knommu: remove unused kernel stats offsets The irq field of the kernel stats struct is not used by the assembly support code, so remove it from the offsets. Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index c785d07..f500dd6 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -30,9 +30,6 @@ int main(void) DEFINE(TASK_MM, offsetof(struct task_struct, mm)); DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); - /* offsets into the kernel_stat struct */ - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); - /* offsets into the irq_cpustat_t struct */ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); @@ -69,9 +66,6 @@ int main(void) DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4); #endif - /* offsets into the kernel_stat struct */ - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); - /* signal defines */ DEFINE(SIGSEGV, SIGSEGV); DEFINE(SEGV_MAPERR, SEGV_MAPERR); -- cgit v0.10.2 From ec40f95db753d3bfdbcc43b1505ecf7980cb6492 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 17 Apr 2009 23:11:38 +1000 Subject: m68knommu: fix DMA support for ColdFire ColdFire CPU family members support DMA (all those with the FEC ethernet core use it, the rest have dedicated DMA engines). The code support is just missing a handful of routines for it to be usable by drivers. Add the missing dma_ functions. Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 4beb59d..5343762 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -16,6 +16,7 @@ config MMU config NO_DMA bool + depends on !COLDFIRE default y config FPU diff --git a/arch/m68knommu/kernel/dma.c b/arch/m68knommu/kernel/dma.c index 9361258..aaf38bb 100644 --- a/arch/m68knommu/kernel/dma.c +++ b/arch/m68knommu/kernel/dma.c @@ -7,10 +7,9 @@ #include #include -#include #include #include -#include +#include void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -36,7 +35,39 @@ void dma_free_coherent(struct device *dev, size_t size, free_pages((unsigned long)vaddr, get_order(size)); } -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) +void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) { + switch (dir) { + case DMA_TO_DEVICE: + flush_dcache_range(handle, size); + break; + case DMA_FROM_DEVICE: + /* Should be clear already */ + break; + default: + if (printk_ratelimit()) + printk("dma_sync_single_for_device: unsupported dir %u\n", dir); + break; + } +} + +EXPORT_SYMBOL(dma_sync_single_for_device); +dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t handle = virt_to_phys(addr); + flush_dcache_range(handle, size); + return handle; } +EXPORT_SYMBOL(dma_map_single); +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t handle = page_to_phys(page) + offset; + dma_sync_single_for_device(dev, handle, size, dir); + return handle; +} +EXPORT_SYMBOL(dma_map_page); -- cgit v0.10.2 From 24f1ce803c55f645429e6a7dd94763fbace84b0a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 16 Apr 2009 04:47:32 +0000 Subject: powerpc: Fix crash on CPU hotplug early_init_mmu_secondary() is called at CPU hotplug time, so it must be marked as __cpuinit, not __init. Caused by 757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit"). Tested-by: Sachin Sant Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index db556d2..1ade7eb 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -753,7 +753,7 @@ void __init early_init_mmu(void) } #ifdef CONFIG_SMP -void __init early_init_mmu_secondary(void) +void __cpuinit early_init_mmu_secondary(void) { /* Initialize hash table for that CPU */ if (!firmware_has_feature(FW_FEATURE_LPAR)) -- cgit v0.10.2 From 59e4c3a2fe9cb1681bb2cff508ff79466f7585ba Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Thu, 16 Apr 2009 06:22:01 +0000 Subject: powerpc/32: Don't clobber personality flags on exec Now that ppc32 implements address randomization it also wants to inherit personality flags like ADDR_NO_RANDOMIZE across exec, for things like `setarch ppc -R' to work. But the ppc32 version of SET_PERSONALITY forcefully sets PER_LINUX, clearing all personality flags. So be careful about preserving the flags. Signed-off-by: Andreas Schwab Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 1a856b1..087c22f 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -258,7 +258,8 @@ do { \ # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ (exec_stk != EXSTACK_DISABLE_X) : 0) #else -# define SET_PERSONALITY(ex) set_personality(PER_LINUX) +# define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX | (current->personality & (~PER_MASK))) #endif /* __powerpc64__ */ extern int dcache_bsize; -- cgit v0.10.2 From 0d3b2ab6be1500041e11059bee97e83da9da28cc Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 16 Apr 2009 09:05:38 +0000 Subject: powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning Fix build warnings like these when CONFIG_PS3_FLASH=n: arch/powerpc/platforms/ps3/os-area.c: warning: 'update_flash_db' defined but not used Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index 86e392b1..cf1cd0f 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -578,7 +578,7 @@ static void os_area_db_init(struct os_area_db *db) * */ -static void update_flash_db(void) +static void __maybe_unused update_flash_db(void) { int result; int file; -- cgit v0.10.2 From fec629b827335154366ecd8b38f007d649338fb3 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 16 Apr 2009 09:05:40 +0000 Subject: maintainers: Fix PS3 patterns Correct the MAINTAINERS file patterns for PS3. Removes some PS3 patterns that were under 'CELL BROADBAND ENGINE ARCHITECTURE', and adds missing PS3 sound and RTC driver patterns. CC: Arnd Bergmann Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras diff --git a/MAINTAINERS b/MAINTAINERS index 0cb20d8..e133ba4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1280,12 +1280,9 @@ L: cbe-oss-dev@ozlabs.org W: http://www.ibm.com/developerworks/power/cell/ S: Supported F: arch/powerpc/include/asm/cell*.h -F: arch/powerpc/include/asm/lv1call.h -F: arch/powerpc/include/asm/ps3*.h F: arch/powerpc/include/asm/spu*.h F: arch/powerpc/oprofile/*cell* F: arch/powerpc/platforms/cell/ -F: arch/powerpc/platforms/ps3/ CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM: P: David Vrabel @@ -4441,7 +4438,9 @@ F: arch/powerpc/include/asm/ps3*.h F: arch/powerpc/platforms/ps3/ F: drivers/*/ps3* F: drivers/ps3/ +F: drivers/rtc/rtc-ps3.c F: drivers/usb/host/*ps3.c +F: sound/ppc/snd_ps3* PS3VRAM DRIVER P: Jim Paris -- cgit v0.10.2 From bcd71fe6b1a8694747b0b451c9ec22d813ad7e27 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Fri, 17 Apr 2009 00:15:13 +0000 Subject: powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK Fixes this build error: In file included from drivers/macintosh/mediabay.c:21: include/linux/ide.h:605: error: field 'request_sense_rq' has incomplete type Signed-off-by: Alexander Beregalov Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 173cf55..3d90683 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -123,7 +123,7 @@ config PMAC_APM_EMU config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" - depends on PPC_PMAC && PPC32 + depends on PPC_PMAC && PPC32 && BLOCK help This option adds support for older PowerBook's hotswap media bay that can contains batteries, floppy drives, or IDE devices. PCI -- cgit v0.10.2 From 2d6b3de2374dd8c9f5ab23d57c7bbcda08553356 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 17 Apr 2009 06:36:37 +0000 Subject: powerpc/pasemi: Fix build error on UP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A non-SMP version of smp_send_stop() is now included in smp.h. Remove the unneeded definition in the pasemi setup.c. Fixes build errors like these when CONFIG_SMP=n: arch/powerpc/platforms/pasemi/setup.c:48: error: redefinition of ‘smp_send_stop’ include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here Reported-by: subrata@linux.vnet.ibm.com Signed-off-by: Geoff Levand Acked-by: Olof Johansson Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index c64fb5b..153051e 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -44,10 +44,6 @@ #include "pasemi.h" -#if !defined(CONFIG_SMP) -static void smp_send_stop(void) {} -#endif - /* SDC reset register, must be pre-mapped at reset time */ static void __iomem *reset_reg; -- cgit v0.10.2 From 6329db8bd60fbc0832f30c350b0181b8d865573e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 21 Apr 2009 09:04:37 +0000 Subject: powerpc: Fix modular build of ide-pmac when mediabay is built in MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that the powermac IDE host driver can be modular, we need to export check_media_bay_by_base() and media_bay_set_ide_infos() from drivers/macintosh/mediabay.c for it. This fixes the following build error: > CC [M] drivers/ide/pmac.o > drivers/ide/pmac.c: In function ‘pmac_ide_init_dev’: > drivers/ide/pmac.c:955: error: implicit declaration of function > ‘check_media_bay_by_base’ > drivers/ide/pmac.c: In function ‘pmac_ide_setup_device’: > drivers/ide/pmac.c:1090: error: implicit declaration of function > ‘media_bay_set_ide_infos’ > make[2]: *** [drivers/ide/pmac.o] Error 1 > make[1]: *** [drivers/ide] Error 2 > make: *** [drivers] Error 2 Reported-by: Subrata Modak Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index d7e46d3..cf02188 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -447,6 +447,7 @@ int check_media_bay_by_base(unsigned long base, int what) return -ENODEV; } +EXPORT_SYMBOL_GPL(check_media_bay_by_base); int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, int irq, ide_hwif_t *hwif) @@ -486,6 +487,7 @@ int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, return -ENODEV; } +EXPORT_SYMBOL_GPL(media_bay_set_ide_infos); #endif /* CONFIG_BLK_DEV_IDE_PMAC */ static void media_bay_step(int i) -- cgit v0.10.2 From 23c560a99d78bddf5c251bfa97bce19e4da4b3f3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 22:10:23 +0900 Subject: scatterlist: make sure sg_miter_next() doesn't return 0 sized mappings Impact: fix not-so-critical but annoying bug sg_miter_next() returns 0 sized mapping if there is an zero sized sg entry in the list or at the end of each iteration. As the users always check the ->length field, this bug shouldn't be critical other than causing unnecessary iteration. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe diff --git a/lib/scatterlist.c b/lib/scatterlist.c index b7b449d..a295e40 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -347,9 +347,12 @@ bool sg_miter_next(struct sg_mapping_iter *miter) sg_miter_stop(miter); /* get to the next sg if necessary. __offset is adjusted by stop */ - if (miter->__offset == miter->__sg->length && --miter->__nents) { - miter->__sg = sg_next(miter->__sg); - miter->__offset = 0; + while (miter->__offset == miter->__sg->length) { + if (--miter->__nents) { + miter->__sg = sg_next(miter->__sg); + miter->__offset = 0; + } else + return false; } /* map the next page */ -- cgit v0.10.2 From 25636e282fe95508cae96bb27f86407aef935817 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 22:10:24 +0900 Subject: block: fix SG_IO vector request data length handling Impact: fix SG_IO behavior such that it matches the documentation SG_IO howto says that if ->dxfer_len and sum of iovec disagress, the shorter one wins. However, the current implementation returns -EINVAL for such cases. Trim iovc if it's longer than ->dxfer_len. This patch uses iov_*() helpers which take struct iovec * by casting struct sg_iovec * to it. sg_iovec is always identical to iovec and this will be further cleaned up with later patches. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 84b7f87..82a0ca2 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -290,6 +290,7 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk, if (hdr->iovec_count) { const int size = sizeof(struct sg_iovec) * hdr->iovec_count; + size_t iov_data_len; struct sg_iovec *iov; iov = kmalloc(size, GFP_KERNEL); @@ -304,8 +305,18 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk, goto out; } + /* SG_IO howto says that the shorter of the two wins */ + iov_data_len = iov_length((struct iovec *)iov, + hdr->iovec_count); + if (hdr->dxfer_len < iov_data_len) { + hdr->iovec_count = iov_shorten((struct iovec *)iov, + hdr->iovec_count, + hdr->dxfer_len); + iov_data_len = hdr->dxfer_len; + } + ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count, - hdr->dxfer_len, GFP_KERNEL); + iov_data_len, GFP_KERNEL); kfree(iov); } else if (hdr->dxfer_len) ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len, -- cgit v0.10.2 From cd0aca2d550f238d80ba58e7dcade4ea3d0a3aa7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 22:10:25 +0900 Subject: block: fix queue bounce limit setting Impact: don't set GFP_DMA in q->bounce_gfp unnecessarily All DMA address limits are expressed in terms of the last addressable unit (byte or page) instead of one plus that. However, when determining bounce_gfp for 64bit machines in blk_queue_bounce_limit(), it compares the specified limit against 0x100000000UL to determine whether it's below 4G ending up falsely setting GFP_DMA in q->bounce_gfp. As DMA zone is very small on x86_64, this makes larger SG_IO transfers very eager to trigger OOM killer. Fix it. While at it, rename the parameter to @dma_mask for clarity and convert comment to proper winged style. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe diff --git a/block/blk-settings.c b/block/blk-settings.c index 69c42ad..57af728 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -156,26 +156,28 @@ EXPORT_SYMBOL(blk_queue_make_request); /** * blk_queue_bounce_limit - set bounce buffer limit for queue - * @q: the request queue for the device - * @dma_addr: bus address limit + * @q: the request queue for the device + * @dma_mask: the maximum address the device can handle * * Description: * Different hardware can have different requirements as to what pages * it can do I/O directly to. A low level driver can call * blk_queue_bounce_limit to have lower memory pages allocated as bounce - * buffers for doing I/O to pages residing above @dma_addr. + * buffers for doing I/O to pages residing above @dma_mask. **/ -void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr) +void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask) { - unsigned long b_pfn = dma_addr >> PAGE_SHIFT; + unsigned long b_pfn = dma_mask >> PAGE_SHIFT; int dma = 0; q->bounce_gfp = GFP_NOIO; #if BITS_PER_LONG == 64 - /* Assume anything <= 4GB can be handled by IOMMU. - Actually some IOMMUs can handle everything, but I don't - know of a way to test this here. */ - if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT)) + /* + * Assume anything <= 4GB can be handled by IOMMU. Actually + * some IOMMUs can handle everything, but I don't know of a + * way to test this here. + */ + if (b_pfn < (min_t(u64, 0xffffffffUL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT)) dma = 1; q->bounce_pfn = max_low_pfn; #else -- cgit v0.10.2 From 451a9ebf653d28337ba53ed5b4b70b0b9543cca1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 19:50:51 +0200 Subject: bio: fix bio_kmalloc() Impact: fix bio_kmalloc() and its destruction path bio_kmalloc() was broken in two ways. * bvec_alloc_bs() first allocates bvec using kmalloc() and then ignores it and allocates again like non-kmalloc bvecs. * bio_kmalloc_destructor() didn't check for and free bio integrity data. This patch fixes the above problems. kmalloc patch is separated out from bio_alloc_bioset() and allocates the requested number of bvecs as inline bvecs. * bio_alloc_bioset() no longer takes NULL @bs. None other than bio_kmalloc() used it and outside users can't know how it was allocated anyway. * Define and use BIO_POOL_NONE so that pool index check in bvec_free_bs() triggers if inline or kmalloc allocated bvec gets there. * Relocate destructors on top of each allocation function so that how they're used is more clear. Jens Axboe suggested allocating bvecs inline. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index cd42bb8..d35588f 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -175,14 +175,6 @@ struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, struct bio_vec *bvl; /* - * If 'bs' is given, lookup the pool and do the mempool alloc. - * If not, this is a bio_kmalloc() allocation and just do a - * kzalloc() for the exact number of vecs right away. - */ - if (!bs) - bvl = kmalloc(nr * sizeof(struct bio_vec), gfp_mask); - - /* * see comment near bvec_array define! */ switch (nr) { @@ -260,21 +252,6 @@ void bio_free(struct bio *bio, struct bio_set *bs) mempool_free(p, bs->bio_pool); } -/* - * default destructor for a bio allocated with bio_alloc_bioset() - */ -static void bio_fs_destructor(struct bio *bio) -{ - bio_free(bio, fs_bio_set); -} - -static void bio_kmalloc_destructor(struct bio *bio) -{ - if (bio_has_allocated_vec(bio)) - kfree(bio->bi_io_vec); - kfree(bio); -} - void bio_init(struct bio *bio) { memset(bio, 0, sizeof(*bio)); @@ -301,21 +278,15 @@ void bio_init(struct bio *bio) **/ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs) { + unsigned long idx = BIO_POOL_NONE; struct bio_vec *bvl = NULL; - struct bio *bio = NULL; - unsigned long idx = 0; - void *p = NULL; - - if (bs) { - p = mempool_alloc(bs->bio_pool, gfp_mask); - if (!p) - goto err; - bio = p + bs->front_pad; - } else { - bio = kmalloc(sizeof(*bio), gfp_mask); - if (!bio) - goto err; - } + struct bio *bio; + void *p; + + p = mempool_alloc(bs->bio_pool, gfp_mask); + if (unlikely(!p)) + return NULL; + bio = p + bs->front_pad; bio_init(bio); @@ -332,22 +303,50 @@ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs) nr_iovecs = bvec_nr_vecs(idx); } +out_set: bio->bi_flags |= idx << BIO_POOL_OFFSET; bio->bi_max_vecs = nr_iovecs; -out_set: bio->bi_io_vec = bvl; - return bio; err_free: - if (bs) - mempool_free(p, bs->bio_pool); - else - kfree(bio); -err: + mempool_free(p, bs->bio_pool); return NULL; } +static void bio_fs_destructor(struct bio *bio) +{ + bio_free(bio, fs_bio_set); +} + +/** + * bio_alloc - allocate a new bio, memory pool backed + * @gfp_mask: allocation mask to use + * @nr_iovecs: number of iovecs + * + * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask + * contains __GFP_WAIT, the allocation is guaranteed to succeed. + * + * RETURNS: + * Pointer to new bio on success, NULL on failure. + */ +struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) +{ + struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); + + if (bio) + bio->bi_destructor = bio_fs_destructor; + + return bio; +} + +static void bio_kmalloc_destructor(struct bio *bio) +{ + if (bio_integrity(bio)) + bio_integrity_free(bio); + kfree(bio); +} + /** * bio_alloc - allocate a bio for I/O * @gfp_mask: the GFP_ mask given to the slab allocator @@ -366,29 +365,20 @@ err: * do so can cause livelocks under memory pressure. * **/ -struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) -{ - struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); - - if (bio) - bio->bi_destructor = bio_fs_destructor; - - return bio; -} - -/* - * Like bio_alloc(), but doesn't use a mempool backing. This means that - * it CAN fail, but while bio_alloc() can only be used for allocations - * that have a short (finite) life span, bio_kmalloc() should be used - * for more permanent bio allocations (like allocating some bio's for - * initalization or setup purposes). - */ struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs) { - struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, NULL); + struct bio *bio; - if (bio) - bio->bi_destructor = bio_kmalloc_destructor; + bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec), + gfp_mask); + if (unlikely(!bio)) + return NULL; + + bio_init(bio); + bio->bi_flags |= BIO_POOL_NONE << BIO_POOL_OFFSET; + bio->bi_max_vecs = nr_iovecs; + bio->bi_io_vec = bio->bi_inline_vecs; + bio->bi_destructor = bio_kmalloc_destructor; return bio; } diff --git a/include/linux/bio.h b/include/linux/bio.h index b89cf2d..7b214fd 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -132,6 +132,7 @@ struct bio { * top 4 bits of bio flags indicate the pool this bio came from */ #define BIO_POOL_BITS (4) +#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1) #define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS) #define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET) #define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET) -- cgit v0.10.2 From a9e9dc24bbc3e084450a22cf4fb82f5f5d4cbeea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 22:10:27 +0900 Subject: bio: use bio_kmalloc() in copy/map functions Impact: remove possible deadlock condition There is no reason to use mempool backed allocation for map functions. Also, because kern mapping is used inside LLDs (e.g. for EH), using mempool backed allocation can lead to deadlock under extreme conditions (mempool already consumed by the time a request reached EH and requests are blocked on EH). Switch copy/map functions to bio_kmalloc(). Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index d35588f..7bbc98f 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -822,7 +822,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, return ERR_PTR(-ENOMEM); ret = -ENOMEM; - bio = bio_alloc(gfp_mask, nr_pages); + bio = bio_kmalloc(gfp_mask, nr_pages); if (!bio) goto out_bmd; @@ -946,7 +946,7 @@ static struct bio *__bio_map_user_iov(struct request_queue *q, if (!nr_pages) return ERR_PTR(-EINVAL); - bio = bio_alloc(gfp_mask, nr_pages); + bio = bio_kmalloc(gfp_mask, nr_pages); if (!bio) return ERR_PTR(-ENOMEM); @@ -1130,7 +1130,7 @@ static struct bio *__bio_map_kern(struct request_queue *q, void *data, int offset, i; struct bio *bio; - bio = bio_alloc(gfp_mask, nr_pages); + bio = bio_kmalloc(gfp_mask, nr_pages); if (!bio) return ERR_PTR(-ENOMEM); -- cgit v0.10.2 From 71982a409f12c50d011325a4471aa20666bb908d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 17 Apr 2009 08:34:48 +0200 Subject: block: include empty disks in /proc/diskstats /proc/diskstats used to show stats for all disks whether they're zero-sized or not and their non-zero partitions. Commit 074a7aca7afa6f230104e8e65eba3420263714a5 accidentally changed the behavior such that it doesn't print out zero sized disks. This patch implements DISK_PITER_INCL_EMPTY_PART0 flag to partition iterator and uses it in diskstats_show() such that empty part0 is shown in /proc/diskstats. Reported and bisectd by Dianel Collins. Signed-off-by: Tejun Heo Reported-by: Daniel Collins Signed-off-by: Jens Axboe diff --git a/block/genhd.c b/block/genhd.c index a9ec910..1a4916e 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -98,7 +98,7 @@ void disk_part_iter_init(struct disk_part_iter *piter, struct gendisk *disk, if (flags & DISK_PITER_REVERSE) piter->idx = ptbl->len - 1; - else if (flags & DISK_PITER_INCL_PART0) + else if (flags & (DISK_PITER_INCL_PART0 | DISK_PITER_INCL_EMPTY_PART0)) piter->idx = 0; else piter->idx = 1; @@ -134,7 +134,8 @@ struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter) /* determine iteration parameters */ if (piter->flags & DISK_PITER_REVERSE) { inc = -1; - if (piter->flags & DISK_PITER_INCL_PART0) + if (piter->flags & (DISK_PITER_INCL_PART0 | + DISK_PITER_INCL_EMPTY_PART0)) end = -1; else end = 0; @@ -150,7 +151,10 @@ struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter) part = rcu_dereference(ptbl->part[piter->idx]); if (!part) continue; - if (!(piter->flags & DISK_PITER_INCL_EMPTY) && !part->nr_sects) + if (!part->nr_sects && + !(piter->flags & DISK_PITER_INCL_EMPTY) && + !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 && + piter->idx == 0)) continue; get_device(part_to_dev(part)); @@ -1011,7 +1015,7 @@ static int diskstats_show(struct seq_file *seqf, void *v) "\n\n"); */ - disk_part_iter_init(&piter, gp, DISK_PITER_INCL_PART0); + disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0); while ((hd = disk_part_iter_next(&piter))) { cpu = part_stat_lock(); part_round_stats(cpu, hd); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 634c530..a1a28ca 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -214,6 +214,7 @@ static inline void disk_put_part(struct hd_struct *part) #define DISK_PITER_REVERSE (1 << 0) /* iterate in the reverse direction */ #define DISK_PITER_INCL_EMPTY (1 << 1) /* include 0-sized parts */ #define DISK_PITER_INCL_PART0 (1 << 2) /* include partition 0 */ +#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */ struct disk_part_iter { struct gendisk *disk; -- cgit v0.10.2 From b759113499d6c7cb75fab04f56772579308bc0f8 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 17 Apr 2009 08:36:50 +0200 Subject: block: make blk_abort_queue() ignore non-request based devices There's nothing to do for those devices, since the timeout handling is based on requests. Signed-off-by: Jens Axboe diff --git a/block/blk-timeout.c b/block/blk-timeout.c index bbbdc4b..8f570c4 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -211,6 +211,12 @@ void blk_abort_queue(struct request_queue *q) struct request *rq, *tmp; LIST_HEAD(list); + /* + * Not a request based block device, nothing to abort + */ + if (!q->request_fn) + return; + spin_lock_irqsave(q->queue_lock, flags); elv_abort_queue(q); -- cgit v0.10.2 From 4d00aa47e2337dcfe2d8a7215dbde3765b507167 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Tue, 21 Apr 2009 07:25:04 +0200 Subject: cfq-iosched: make seek_mean converge more quickly Right now, depending on the first sector to which a process issues I/O, the seek time may start out way out of whack. So make sure we start with 0 sectors in seek, instead of the offset of the first request issued. Signed-off-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 0d3b70d..0eb4aff 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1908,7 +1908,9 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_io_context *cic, sector_t sdist; u64 total; - if (cic->last_request_pos < rq->sector) + if (!cic->last_request_pos) + sdist = 0; + else if (cic->last_request_pos < rq->sector) sdist = rq->sector - cic->last_request_pos; else sdist = cic->last_request_pos - rq->sector; -- cgit v0.10.2 From 04dc6e71a28d4815bf9431efcafc107bb0ad2792 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Tue, 21 Apr 2009 07:31:56 +0200 Subject: cfq-iosched: use the default seek distance when there aren't enough seek samples If the cfq io context doesn't have enough samples yet to provide a mean seek distance, then use the default threshold we have for seeky IO instead of defaulting to 0. Signed-off-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 0eb4aff..7e13f04 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -947,14 +947,18 @@ static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd, return cfqd->last_position - rq->sector; } +#define CIC_SEEK_THR 8 * 1024 +#define CIC_SEEKY(cic) ((cic)->seek_mean > CIC_SEEK_THR) + static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq) { struct cfq_io_context *cic = cfqd->active_cic; + sector_t sdist = cic->seek_mean; if (!sample_valid(cic->seek_samples)) - return 0; + sdist = CIC_SEEK_THR; - return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean; + return cfq_dist_from_last(cfqd, rq) <= sdist; } static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, @@ -1039,9 +1043,6 @@ static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd, return cfqq; } - -#define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024)) - static void cfq_arm_slice_timer(struct cfq_data *cfqd) { struct cfq_queue *cfqq = cfqd->active_queue; -- cgit v0.10.2 From bbe188c8f16effd902d1ad391e06e41ce649b22e Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 21 Apr 2009 06:04:20 +0000 Subject: af_iucv: consider state IUCV_CLOSING when closing a socket Make sure a second invocation of iucv_sock_close() guarantees proper freeing of an iucv path. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 49e7865..2941ee5 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -172,6 +172,7 @@ static void iucv_sock_close(struct sock *sk) err = iucv_sock_wait_state(sk, IUCV_CLOSED, 0, timeo); } + case IUCV_CLOSING: /* fall through */ sk->sk_state = IUCV_CLOSED; sk->sk_state_change(sk); @@ -224,6 +225,8 @@ static struct sock *iucv_sock_alloc(struct socket *sock, int proto, gfp_t prio) spin_lock_init(&iucv_sk(sk)->message_q.lock); skb_queue_head_init(&iucv_sk(sk)->backlog_skb_q); iucv_sk(sk)->send_tag = 0; + iucv_sk(sk)->path = NULL; + memset(&iucv_sk(sk)->src_user_id , 0, 32); sk->sk_destruct = iucv_sock_destruct; sk->sk_sndtimeo = IUCV_CONN_TIMEOUT; -- cgit v0.10.2 From 60d3705fcbfe7deca8e94bc7ddecd6f9f1a4647e Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:21 +0000 Subject: af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag If iucv_sock_recvmsg() is called with MSG_PEEK flag set, the skb is enqueued twice. If the socket is then closed, the pointer to the skb is freed twice. Remove the skb_queue_head() call for MSG_PEEK, because the skb_recv_datagram() function already handles MSG_PEEK (does not dequeue the skb). Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 2941ee5..42b3be3 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -814,6 +814,8 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, target = sock_rcvlowat(sk, flags & MSG_WAITALL, len); + /* receive/dequeue next skb: + * the function understands MSG_PEEK and, thus, does not dequeue skb */ skb = skb_recv_datagram(sk, flags, noblock, &err); if (!skb) { if (sk->sk_shutdown & RCV_SHUTDOWN) @@ -861,9 +863,7 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, iucv_process_message_q(sk); spin_unlock_bh(&iucv->message_q.lock); } - - } else - skb_queue_head(&sk->sk_receive_queue, skb); + } done: return err ? : copied; -- cgit v0.10.2 From fe86e54ef9465c97a16337d2a41a4cf486b937ae Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:22 +0000 Subject: af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set Reject incoming iucv messages if the receive direction has been shut down. It avoids that the queue of outstanding messages increases and exceeds the message limit of the iucv communication path. Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 42b3be3..ee51710 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1116,8 +1116,10 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg) struct sock_msg_q *save_msg; int len; - if (sk->sk_shutdown & RCV_SHUTDOWN) + if (sk->sk_shutdown & RCV_SHUTDOWN) { + iucv_message_reject(path, msg); return; + } if (!list_empty(&iucv->message_q.list) || !skb_queue_empty(&iucv->backlog_skb_q)) -- cgit v0.10.2 From e14ad5fa8705fb354e72312479abbe420ebc3f8e Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:23 +0000 Subject: af_iucv: Test additional sk states in iucv_sock_shutdown Add few more sk states in iucv_sock_shutdown(). Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index ee51710..9cfdaad 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -937,6 +937,9 @@ static int iucv_sock_shutdown(struct socket *sock, int how) lock_sock(sk); switch (sk->sk_state) { + case IUCV_DISCONN: + case IUCV_CLOSING: + case IUCV_SEVERED: case IUCV_CLOSED: err = -ENOTCONN; goto fail; -- cgit v0.10.2 From 3fa6b5adbe46b3d665267dee0f879858ab464f44 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:24 +0000 Subject: af_iucv: Fix race when queuing incoming iucv messages AF_IUCV runs into a race when queuing incoming iucv messages and receiving the resulting backlog. If the Linux system is under pressure (high load or steal time), the message queue grows up, but messages are not received and queued onto the backlog queue. In that case, applications do not receive any data with recvmsg() even if AF_IUCV puts incoming messages onto the message queue. The race can be avoided if the message queue spinlock in the message_pending callback is spreaded across the entire callback function. Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 9cfdaad..b51c918 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1124,6 +1124,8 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg) return; } + spin_lock(&iucv->message_q.lock); + if (!list_empty(&iucv->message_q.list) || !skb_queue_empty(&iucv->backlog_skb_q)) goto save_message; @@ -1137,9 +1139,8 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg) if (!skb) goto save_message; - spin_lock(&iucv->message_q.lock); iucv_process_message(sk, skb, path, msg); - spin_unlock(&iucv->message_q.lock); + goto out_unlock; return; @@ -1150,8 +1151,9 @@ save_message: save_msg->path = path; save_msg->msg = *msg; - spin_lock(&iucv->message_q.lock); list_add_tail(&save_msg->list, &iucv->message_q.list); + +out_unlock: spin_unlock(&iucv->message_q.lock); } -- cgit v0.10.2 From c5505081cd734a409eb11e1f844b6bf5427a7925 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 17:10:46 +1000 Subject: m68knommu: update the defconfig for the ColdFire 5208evb board Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig index 6fae33a..854a4f3 100644 --- a/arch/m68knommu/configs/m5208evb_defconfig +++ b/arch/m68knommu/configs/m5208evb_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,53 +34,55 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -93,7 +96,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -145,44 +148,39 @@ CONFIG_RAM16BIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -223,6 +221,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -232,7 +231,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -243,14 +244,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -289,10 +284,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -303,10 +296,6 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -315,7 +304,6 @@ CONFIG_MTD_RAM=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set @@ -337,6 +325,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -351,6 +344,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -364,7 +358,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -374,10 +368,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC=y # CONFIG_FEC2 is not set @@ -389,8 +388,10 @@ CONFIG_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -415,7 +416,7 @@ CONFIG_FEC=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -428,7 +429,6 @@ CONFIG_FEC=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=115200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -447,19 +447,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -470,11 +474,12 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y # # Graphics support @@ -488,10 +493,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -499,7 +500,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -507,11 +511,13 @@ CONFIG_SSB_POSSIBLE=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -520,6 +526,11 @@ CONFIG_EXT2_FS=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -540,10 +551,7 @@ CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -553,13 +561,20 @@ CONFIG_PROC_SYSCTL=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -581,10 +596,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_FULLDEBUG=y # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -592,19 +611,23 @@ CONFIG_FULLDEBUG=y # Security options # # CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From f170ea24c218905f78791b15a6dcb3c99b730a60 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 17:26:49 +1000 Subject: m68knommu: add a defconfig for the ColdFire M5272C3 board Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/configs/m5272c3_defconfig b/arch/m68knommu/configs/m5272c3_defconfig new file mode 100644 index 0000000..f37852a --- /dev/null +++ b/arch/m68knommu/configs/m5272c3_defconfig @@ -0,0 +1,645 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 17:17:30 2009 +# +CONFIG_M68K=y +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_ZONE_DMA=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_NO_IOPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# Processor type and features +# +# CONFIG_M68328 is not set +# CONFIG_M68EZ328 is not set +# CONFIG_M68VZ328 is not set +# CONFIG_M68360 is not set +# CONFIG_M5206 is not set +# CONFIG_M5206e is not set +# CONFIG_M520x is not set +# CONFIG_M523x is not set +# CONFIG_M5249 is not set +# CONFIG_M5271 is not set +CONFIG_M5272=y +# CONFIG_M5275 is not set +# CONFIG_M528x is not set +# CONFIG_M5307 is not set +# CONFIG_M532x is not set +# CONFIG_M5407 is not set +CONFIG_COLDFIRE=y +CONFIG_CLOCK_SET=y +CONFIG_CLOCK_FREQ=66666666 +CONFIG_CLOCK_DIV=1 + +# +# Platform +# +# CONFIG_UC5272 is not set +CONFIG_M5272C3=y +# CONFIG_COBRA5272 is not set +# CONFIG_CANCam is not set +# CONFIG_SCALES is not set +# CONFIG_NETtel is not set +# CONFIG_CPU16B is not set +# CONFIG_MOD5272 is not set +CONFIG_FREESCALE=y +CONFIG_4KSTACKS=y +CONFIG_HZ=100 + +# +# RAM configuration +# +CONFIG_RAMBASE=0x00000000 +CONFIG_RAMSIZE=0x00800000 +CONFIG_VECTORBASE=0x00000000 +CONFIG_KERNELBASE=0x00020000 +CONFIG_RAMAUTOBIT=y +# CONFIG_RAM8BIT is not set +# CONFIG_RAM16BIT is not set +# CONFIG_RAM32BIT is not set + +# +# ROM configuration +# +# CONFIG_ROM is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MCF=y +CONFIG_SERIAL_MCF_BAUDRATE=19200 +CONFIG_SERIAL_MCF_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_SAMPLES is not set +# CONFIG_FULLDEBUG is not set +# CONFIG_HIGHPROFILE is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" +# CONFIG_NO_KERNEL_MSG is not set +# CONFIG_BDM_DISABLE is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From 3f9738f73ad08ef770df64f145007bd27ac2fa16 Mon Sep 17 00:00:00 2001 From: Jianjun kong Date: Mon, 20 Apr 2009 23:48:25 +0000 Subject: 8139too: fix HW initial flow While ifconfig eth0 up kernel calls open() of 8139 driver(8139too.c). In rtl8139_hw_start() of rtl8139_open(), 8139 driver enable RX before setting up the DMA buffer address. In this interval where RX was enabled and DMA buffer address is not yet set up, any incoming broadcast packet would be send to a strange physical address: 0x003e8800 which is the default value of DMA buffer address. Unfortunately, this address is used by Linux kernel. So kernel panics. This patch fix it by setting up DMA buffer address before RX enabled and everything is fine even under broadcast packets attack. Signed-off-by: Jonathan Lin Signed-off-by: Amos Kong Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 29df398..1fc4543 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -1383,6 +1383,11 @@ static void rtl8139_hw_start (struct net_device *dev) RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0))); RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4))); + tp->cur_rx = 0; + + /* init Rx ring buffer DMA address */ + RTL_W32_F (RxBuf, tp->rx_ring_dma); + /* Must enable Tx/Rx before setting transfer thresholds! */ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); @@ -1390,8 +1395,6 @@ static void rtl8139_hw_start (struct net_device *dev) RTL_W32 (RxConfig, tp->rx_config); RTL_W32 (TxConfig, rtl8139_tx_config); - tp->cur_rx = 0; - rtl_check_media (dev, 1); if (tp->chipset >= CH_8139B) { @@ -1406,9 +1409,6 @@ static void rtl8139_hw_start (struct net_device *dev) /* Lock Config[01234] and BMCR register writes */ RTL_W8 (Cfg9346, Cfg9346_Lock); - /* init Rx ring buffer DMA address */ - RTL_W32_F (RxBuf, tp->rx_ring_dma); - /* init Tx buffer DMA addresses */ for (i = 0; i < NUM_TX_DESC; i++) RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs)); -- cgit v0.10.2 From cef309cf6112f9a44b1ebcefc1641d01d35c83dc Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 20 Apr 2009 22:36:43 +0000 Subject: ucc_geth.c: Fix upsmr setting in RMII mode If using the UCC on a MPC8360 in RMII mode, don;t set UCC_GETH_UPSMR_RPM bit in the upsmr register. Signed-off-by: Heiko Schocher Acked-by: Li Yang Signed-off-by: David S. Miller diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index d3f39e8..44f8392 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1394,7 +1394,8 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth) (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) || (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) || (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) { - upsmr |= UCC_GETH_UPSMR_RPM; + if (ugeth->phy_interface != PHY_INTERFACE_MODE_RMII) + upsmr |= UCC_GETH_UPSMR_RPM; switch (ugeth->max_speed) { case SPEED_10: upsmr |= UCC_GETH_UPSMR_R10M; -- cgit v0.10.2 From 50b2ff1bc47baacb8e9882b2b2a74b240ddbeecf Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 21 Apr 2009 10:04:22 +0000 Subject: netlabel: Always remove the correct address selector The NetLabel address selector mechanism has a problem where it can get mistakenly remove the wrong selector when similar addresses are used. The problem is caused when multiple addresses are configured that have different netmasks but the same address, e.g. 127.0.0.0/8 and 127.0.0.0/24. This patch fixes the problem. Reported-by: Etienne Basset Signed-off-by: Paul Moore Acked-by: James Morris Tested-by: Etienne Basset Signed-off-by: David S. Miller diff --git a/net/netlabel/netlabel_addrlist.c b/net/netlabel/netlabel_addrlist.c index 834c6eb..c051913 100644 --- a/net/netlabel/netlabel_addrlist.c +++ b/net/netlabel/netlabel_addrlist.c @@ -256,13 +256,11 @@ struct netlbl_af4list *netlbl_af4list_remove(__be32 addr, __be32 mask, { struct netlbl_af4list *entry; - entry = netlbl_af4list_search(addr, head); - if (entry != NULL && entry->addr == addr && entry->mask == mask) { - netlbl_af4list_remove_entry(entry); - return entry; - } - - return NULL; + entry = netlbl_af4list_search_exact(addr, mask, head); + if (entry == NULL) + return NULL; + netlbl_af4list_remove_entry(entry); + return entry; } #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) @@ -299,15 +297,11 @@ struct netlbl_af6list *netlbl_af6list_remove(const struct in6_addr *addr, { struct netlbl_af6list *entry; - entry = netlbl_af6list_search(addr, head); - if (entry != NULL && - ipv6_addr_equal(&entry->addr, addr) && - ipv6_addr_equal(&entry->mask, mask)) { - netlbl_af6list_remove_entry(entry); - return entry; - } - - return NULL; + entry = netlbl_af6list_search_exact(addr, mask, head); + if (entry == NULL) + return NULL; + netlbl_af6list_remove_entry(entry); + return entry; } #endif /* IPv6 */ -- cgit v0.10.2 From cc29c70dd581f85ee7a3e7980fb031f90b90a2ab Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 22 Apr 2009 00:49:51 -0700 Subject: net/netrom: Fix socket locking Patch "af_rose/x25: Sanity check the maximum user frame size" (commit 83e0bbcbe2145f160fbaa109b0439dae7f4a38a9) from Alan Cox got locking wrong. If we bail out due to user frame size being too large, we must unlock the socket beforehand. Signed-off-by: Jean Delvare Signed-off-by: David S. Miller diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 4e705f8..3be0e01 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1084,8 +1084,10 @@ static int nr_sendmsg(struct kiocb *iocb, struct socket *sock, /* Build a packet - the conventional user limit is 236 bytes. We can do ludicrously large NetROM frames but must not overflow */ - if (len > 65536) - return -EMSGSIZE; + if (len > 65536) { + err = -EMSGSIZE; + goto out; + } SOCK_DEBUG(sk, "NET/ROM: sendto: building packet.\n"); size = len + NR_NETWORK_LEN + NR_TRANSPORT_LEN; -- cgit v0.10.2 From ae6e84596e7b321d9a08e81679c6a3f799634636 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Thu, 12 Mar 2009 00:19:46 -0500 Subject: eCryptfs: Copy lower inode attrs before dentry instantiation Copies the lower inode attributes to the upper inode before passing the upper inode to d_instantiate(). This is important for security_d_instantiate(). The problem was discovered by a user seeing SELinux denials like so: type=AVC msg=audit(1236812817.898:47): avc: denied { 0x100000 } for pid=3584 comm="httpd" name="testdir" dev=ecryptfs ino=943872 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:httpd_sys_content_t:s0 tclass=file Notice target class is file while testdir is really a directory, confusing the permission translation (0x100000) due to the wrong i_mode. Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index aed56c2..7638b0a 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -190,14 +190,14 @@ int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry, init_special_inode(inode, lower_inode->i_mode, lower_inode->i_rdev); dentry->d_op = &ecryptfs_dops; - if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD) - d_add(dentry, inode); - else - d_instantiate(dentry, inode); fsstack_copy_attr_all(inode, lower_inode, NULL); /* This size will be overwritten for real files w/ headers and * other metadata */ fsstack_copy_inode_size(inode, lower_inode); + if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD) + d_add(dentry, inode); + else + d_instantiate(dentry, inode); out: return rc; } -- cgit v0.10.2 From 57ea34d19963781d05eb12f9b31bd4f70d61ec16 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Sun, 15 Mar 2009 14:17:01 -0500 Subject: eCryptfs: NULL pointer dereference in ecryptfs_send_miscdev() If data is NULL, msg_ctx->msg is set to NULL and then dereferenced afterwards. ecryptfs_send_raw_message() is the only place that ecryptfs_send_miscdev() is called with data being NULL, but the only caller of that function (ecryptfs_process_helo()) is never called. In short, there is currently no way to trigger the NULL pointer dereference. This patch removes the two unused functions and modifies ecryptfs_send_miscdev() to remove the NULL dereferences. Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c index 295e7fa5..f1c17e8 100644 --- a/fs/ecryptfs/messaging.c +++ b/fs/ecryptfs/messaging.c @@ -133,45 +133,6 @@ out: return rc; } -static int -ecryptfs_send_message_locked(char *data, int data_len, u8 msg_type, - struct ecryptfs_msg_ctx **msg_ctx); - -/** - * ecryptfs_send_raw_message - * @msg_type: Message type - * @daemon: Daemon struct for recipient of message - * - * A raw message is one that does not include an ecryptfs_message - * struct. It simply has a type. - * - * Must be called with ecryptfs_daemon_hash_mux held. - * - * Returns zero on success; non-zero otherwise - */ -static int ecryptfs_send_raw_message(u8 msg_type, - struct ecryptfs_daemon *daemon) -{ - struct ecryptfs_msg_ctx *msg_ctx; - int rc; - - rc = ecryptfs_send_message_locked(NULL, 0, msg_type, &msg_ctx); - if (rc) { - printk(KERN_ERR "%s: Error whilst attempting to send " - "message to ecryptfsd; rc = [%d]\n", __func__, rc); - goto out; - } - /* Raw messages are logically context-free (e.g., no - * reply is expected), so we set the state of the - * ecryptfs_msg_ctx object to indicate that it should - * be freed as soon as the message is sent. */ - mutex_lock(&msg_ctx->mux); - msg_ctx->state = ECRYPTFS_MSG_CTX_STATE_NO_REPLY; - mutex_unlock(&msg_ctx->mux); -out: - return rc; -} - /** * ecryptfs_spawn_daemon - Create and initialize a new daemon struct * @daemon: Pointer to set to newly allocated daemon struct @@ -212,49 +173,6 @@ out: } /** - * ecryptfs_process_helo - * @euid: The user ID owner of the message - * @user_ns: The namespace in which @euid applies - * @pid: The process ID for the userspace program that sent the - * message - * - * Adds the euid and pid values to the daemon euid hash. If an euid - * already has a daemon pid registered, the daemon will be - * unregistered before the new daemon is put into the hash list. - * Returns zero after adding a new daemon to the hash list; - * non-zero otherwise. - */ -int ecryptfs_process_helo(uid_t euid, struct user_namespace *user_ns, - struct pid *pid) -{ - struct ecryptfs_daemon *new_daemon; - struct ecryptfs_daemon *old_daemon; - int rc; - - mutex_lock(&ecryptfs_daemon_hash_mux); - rc = ecryptfs_find_daemon_by_euid(&old_daemon, euid, user_ns); - if (rc != 0) { - printk(KERN_WARNING "Received request from user [%d] " - "to register daemon [0x%p]; unregistering daemon " - "[0x%p]\n", euid, pid, old_daemon->pid); - rc = ecryptfs_send_raw_message(ECRYPTFS_MSG_QUIT, old_daemon); - if (rc) - printk(KERN_WARNING "Failed to send QUIT " - "message to daemon [0x%p]; rc = [%d]\n", - old_daemon->pid, rc); - hlist_del(&old_daemon->euid_chain); - kfree(old_daemon); - } - rc = ecryptfs_spawn_daemon(&new_daemon, euid, user_ns, pid); - if (rc) - printk(KERN_ERR "%s: The gods are displeased with this attempt " - "to create a new daemon object for euid [%d]; pid " - "[0x%p]; rc = [%d]\n", __func__, euid, pid, rc); - mutex_unlock(&ecryptfs_daemon_hash_mux); - return rc; -} - -/** * ecryptfs_exorcise_daemon - Destroy the daemon struct * * Must be called ceremoniously while in possession of diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c index dda3c58..4ec8f61 100644 --- a/fs/ecryptfs/miscdev.c +++ b/fs/ecryptfs/miscdev.c @@ -193,26 +193,20 @@ int ecryptfs_send_miscdev(char *data, size_t data_size, int rc = 0; mutex_lock(&msg_ctx->mux); - if (data) { - msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size), - GFP_KERNEL); - if (!msg_ctx->msg) { - rc = -ENOMEM; - printk(KERN_ERR "%s: Out of memory whilst attempting " - "to kmalloc(%zd, GFP_KERNEL)\n", __func__, - (sizeof(*msg_ctx->msg) + data_size)); - goto out_unlock; - } - } else - msg_ctx->msg = NULL; + msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size), + GFP_KERNEL); + if (!msg_ctx->msg) { + rc = -ENOMEM; + printk(KERN_ERR "%s: Out of memory whilst attempting " + "to kmalloc(%zd, GFP_KERNEL)\n", __func__, + (sizeof(*msg_ctx->msg) + data_size)); + goto out_unlock; + } msg_ctx->msg->index = msg_ctx->index; msg_ctx->msg->data_len = data_size; msg_ctx->type = msg_type; - if (data) { - memcpy(msg_ctx->msg->data, data, data_size); - msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size); - } else - msg_ctx->msg_size = 0; + memcpy(msg_ctx->msg->data, data, data_size); + msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size); mutex_lock(&daemon->mux); list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue); daemon->num_queued_msg_ctx++; -- cgit v0.10.2 From 3a5203ab3c0c31e0f1434c69e893bfb85c6e6657 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 16 Mar 2009 12:35:12 -0500 Subject: eCryptfs: Print FNEK sig properly in /proc/mounts The filename encryption key signature is not properly displayed in /proc/mounts. The "ecryptfs_sig=" mount option name is displayed for all global authentication tokens, included those for filename keys. This patch checks the global authentication token flags to determine if the key is a FEKEK or FNEK and prints the appropriate mount option name before the signature. Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c index c27ac2b..b500302 100644 --- a/fs/ecryptfs/super.c +++ b/fs/ecryptfs/super.c @@ -170,7 +170,10 @@ static int ecryptfs_show_options(struct seq_file *m, struct vfsmount *mnt) list_for_each_entry(walker, &mount_crypt_stat->global_auth_tok_list, mount_crypt_stat_list) { - seq_printf(m, ",ecryptfs_sig=%s", walker->sig); + if (walker->flags & ECRYPTFS_AUTH_TOK_FNEK) + seq_printf(m, ",ecryptfs_fnek_sig=%s", walker->sig); + else + seq_printf(m, ",ecryptfs_sig=%s", walker->sig); } mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex); -- cgit v0.10.2 From 13a791b4e63eb0537a7f804a340d6527485983b4 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 13 Apr 2009 15:29:27 -0500 Subject: eCryptfs: Fix data corruption when using ecryptfs_passthrough ecryptfs_passthrough is a mount option that allows eCryptfs to allow data to be written to non-eCryptfs files in the lower filesystem. The passthrough option was causing data corruption due to it not always being treated as a non-eCryptfs file. The first 8 bytes of an eCryptfs file contains the decrypted file size. This value was being written to the non-eCryptfs files, too. Also, extra 0x00 characters were being written to make the file size a multiple of PAGE_CACHE_SIZE. Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 8b65f28..b91851f 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -483,15 +483,7 @@ int ecryptfs_encrypt_page(struct page *page) ecryptfs_inode = page->mapping->host; crypt_stat = &(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat); - if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { - rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page, - 0, PAGE_CACHE_SIZE); - if (rc) - printk(KERN_ERR "%s: Error attempting to copy " - "page at index [%ld]\n", __func__, - page->index); - goto out; - } + BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)); enc_extent_page = alloc_page(GFP_USER); if (!enc_extent_page) { rc = -ENOMEM; @@ -620,16 +612,7 @@ int ecryptfs_decrypt_page(struct page *page) ecryptfs_inode = page->mapping->host; crypt_stat = &(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat); - if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { - rc = ecryptfs_read_lower_page_segment(page, page->index, 0, - PAGE_CACHE_SIZE, - ecryptfs_inode); - if (rc) - printk(KERN_ERR "%s: Error attempting to copy " - "page at index [%ld]\n", __func__, - page->index); - goto out; - } + BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)); enc_extent_page = alloc_page(GFP_USER); if (!enc_extent_page) { rc = -ENOMEM; diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 55b3145..5ed86e2 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -814,6 +814,13 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) size_t num_zeros = (PAGE_CACHE_SIZE - (new_length & ~PAGE_CACHE_MASK)); + if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { + rc = vmtruncate(inode, new_length); + if (rc) + goto out_free; + rc = vmtruncate(lower_dentry->d_inode, new_length); + goto out_free; + } if (num_zeros) { char *zeros_virt; @@ -915,8 +922,6 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) } rc = 0; crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED); - mutex_unlock(&crypt_stat->cs_mutex); - goto out; } } mutex_unlock(&crypt_stat->cs_mutex); diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c index 46cec2b..5c6bab9 100644 --- a/fs/ecryptfs/mmap.c +++ b/fs/ecryptfs/mmap.c @@ -449,6 +449,7 @@ int ecryptfs_write_inode_size_to_metadata(struct inode *ecryptfs_inode) struct ecryptfs_crypt_stat *crypt_stat; crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; + BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)); if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR) return ecryptfs_write_inode_size_to_xattr(ecryptfs_inode); else @@ -490,6 +491,16 @@ static int ecryptfs_write_end(struct file *file, ecryptfs_printk(KERN_DEBUG, "Not a new file\n"); ecryptfs_printk(KERN_DEBUG, "Calling fill_zeros_to_end_of_page" "(page w/ index = [0x%.16x], to = [%d])\n", index, to); + if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { + rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page, 0, + to); + if (!rc) { + rc = copied; + fsstack_copy_inode_size(ecryptfs_inode, + ecryptfs_inode_to_lower(ecryptfs_inode)); + } + goto out; + } /* Fills in zeros if 'to' goes beyond inode size */ rc = fill_zeros_to_end_of_page(page, to); if (rc) { diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c index 75c2ea9..a137c6e 100644 --- a/fs/ecryptfs/read_write.c +++ b/fs/ecryptfs/read_write.c @@ -117,13 +117,15 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, size_t size) { struct page *ecryptfs_page; + struct ecryptfs_crypt_stat *crypt_stat; + struct inode *ecryptfs_inode = ecryptfs_file->f_dentry->d_inode; char *ecryptfs_page_virt; - loff_t ecryptfs_file_size = - i_size_read(ecryptfs_file->f_dentry->d_inode); + loff_t ecryptfs_file_size = i_size_read(ecryptfs_inode); loff_t data_offset = 0; loff_t pos; int rc = 0; + crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; /* * if we are writing beyond current size, then start pos * at the current size - we'll fill in zeros from there. @@ -184,7 +186,13 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, flush_dcache_page(ecryptfs_page); SetPageUptodate(ecryptfs_page); unlock_page(ecryptfs_page); - rc = ecryptfs_encrypt_page(ecryptfs_page); + if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) + rc = ecryptfs_encrypt_page(ecryptfs_page); + else + rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, + ecryptfs_page, + start_offset_in_page, + data_offset); page_cache_release(ecryptfs_page); if (rc) { printk(KERN_ERR "%s: Error encrypting " @@ -194,14 +202,16 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, pos += num_bytes; } if ((offset + size) > ecryptfs_file_size) { - i_size_write(ecryptfs_file->f_dentry->d_inode, (offset + size)); - rc = ecryptfs_write_inode_size_to_metadata( - ecryptfs_file->f_dentry->d_inode); - if (rc) { - printk(KERN_ERR "Problem with " - "ecryptfs_write_inode_size_to_metadata; " - "rc = [%d]\n", rc); - goto out; + i_size_write(ecryptfs_inode, (offset + size)); + if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) { + rc = ecryptfs_write_inode_size_to_metadata( + ecryptfs_inode); + if (rc) { + printk(KERN_ERR "Problem with " + "ecryptfs_write_inode_size_to_metadata; " + "rc = [%d]\n", rc); + goto out; + } } } out: -- cgit v0.10.2 From e77cc8d243f9f1e1d3f0799e23cc14e837ccc8c6 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 22 Apr 2009 04:08:46 -0500 Subject: eCryptfs: Remove ecryptfs_unlink_sigs warnings A feature was added to the eCryptfs umount helper to automatically unlink the keys used for an eCryptfs mount from the kernel keyring upon umount. This patch keeps the unrecognized mount option warnings for ecryptfs_unlink_sigs out of the logs. Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 064c582..00b30a2 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -269,6 +269,7 @@ struct ecryptfs_crypt_stat { #define ECRYPTFS_ENCRYPT_FILENAMES 0x00000800 #define ECRYPTFS_ENCFN_USE_MOUNT_FNEK 0x00001000 #define ECRYPTFS_ENCFN_USE_FEK 0x00002000 +#define ECRYPTFS_UNLINK_SIGS 0x00004000 u32 flags; unsigned int file_version; size_t iv_bytes; diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 7638b0a..ccabd5f 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -208,7 +208,7 @@ enum { ecryptfs_opt_sig, ecryptfs_opt_ecryptfs_sig, ecryptfs_opt_passthrough, ecryptfs_opt_xattr_metadata, ecryptfs_opt_encrypted_view, ecryptfs_opt_fnek_sig, ecryptfs_opt_fn_cipher, ecryptfs_opt_fn_cipher_key_bytes, - ecryptfs_opt_err }; + ecryptfs_opt_unlink_sigs, ecryptfs_opt_err }; static const match_table_t tokens = { {ecryptfs_opt_sig, "sig=%s"}, @@ -222,6 +222,7 @@ static const match_table_t tokens = { {ecryptfs_opt_fnek_sig, "ecryptfs_fnek_sig=%s"}, {ecryptfs_opt_fn_cipher, "ecryptfs_fn_cipher=%s"}, {ecryptfs_opt_fn_cipher_key_bytes, "ecryptfs_fn_key_bytes=%u"}, + {ecryptfs_opt_unlink_sigs, "ecryptfs_unlink_sigs"}, {ecryptfs_opt_err, NULL} }; @@ -402,6 +403,9 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options) fn_cipher_key_bytes; fn_cipher_key_bytes_set = 1; break; + case ecryptfs_opt_unlink_sigs: + mount_crypt_stat->flags |= ECRYPTFS_UNLINK_SIGS; + break; case ecryptfs_opt_err: default: printk(KERN_WARNING diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c index b500302..fa4c7e7 100644 --- a/fs/ecryptfs/super.c +++ b/fs/ecryptfs/super.c @@ -189,6 +189,8 @@ static int ecryptfs_show_options(struct seq_file *m, struct vfsmount *mnt) seq_printf(m, ",ecryptfs_xattr_metadata"); if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED) seq_printf(m, ",ecryptfs_encrypted_view"); + if (mount_crypt_stat->flags & ECRYPTFS_UNLINK_SIGS) + seq_printf(m, ",ecryptfs_unlink_sigs"); return 0; } -- cgit v0.10.2 From 29fe1b481283a1bada994a69f65736db4ae6f35f Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 22 Apr 2009 02:26:37 -0700 Subject: netfilter: ctnetlink: fix gcc warning during compilation This patch fixes a (bogus?) gcc warning during compilation: net/netfilter/nf_conntrack_netlink.c:1234: warning: 'helpname' may be used uninitialized in this function net/netfilter/nf_conntrack_netlink.c:991: warning: 'helpname' may be used uninitialized in this function In fact, helpname is initialized by ctnetlink_parse_help() so I cannot see a way to use it without being initialized. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 0ea36e0..f13fc57 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -988,7 +988,7 @@ ctnetlink_change_helper(struct nf_conn *ct, struct nlattr *cda[]) { struct nf_conntrack_helper *helper; struct nf_conn_help *help = nfct_help(ct); - char *helpname; + char *helpname = NULL; int err; /* don't change helper of sibling connections */ @@ -1231,7 +1231,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[], rcu_read_lock(); if (cda[CTA_HELP]) { - char *helpname; + char *helpname = NULL; err = ctnetlink_parse_help(cda[CTA_HELP], &helpname); if (err < 0) -- cgit v0.10.2 From ccb077fd466ec3f35662d6c66412b42b36e11bc3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 21 Apr 2009 12:57:00 +0100 Subject: ASoC: Fix WM8580 volume update handling for large register changes The driver is out of sync with the core functions it is using. Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index 41aab4a..9f6be3d 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -268,9 +268,11 @@ static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1); static int wm8580_out_vu(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - int reg = kcontrol->private_value & 0xff; - int reg2 = (kcontrol->private_value >> 24) & 0xff; + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; int ret; u16 val; @@ -292,15 +294,17 @@ static int wm8580_out_vu(struct snd_kcontrol *kcontrol, return 0; } -#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \ +#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \ + xinvert, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ SNDRV_CTL_ELEM_ACCESS_READWRITE, \ .tlv.p = (tlv_array), \ .info = snd_soc_info_volsw_2r, \ .get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \ - .private_value = (reg_left) | ((shift) << 8) | \ - ((max) << 12) | ((invert) << 20) | ((reg_right) << 24) } + .private_value = (unsigned long)&(struct soc_mixer_control) \ + {.reg = reg_left, .rreg = reg_right, .shift = xshift, \ + .max = xmax, .invert = xinvert} } static const struct snd_kcontrol_new wm8580_snd_controls[] = { SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume", -- cgit v0.10.2 From 956d039a2537cf79ca608450d36cc70e0e515482 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Apr 2009 04:14:15 -0700 Subject: sparc: Fix bus type probing for ESP and LE devices. If there is a dummy "espdma" or "ledma" parent device above ESP scsi or LE ethernet device nodes, we have to match the bus as SBUS. Otherwise the address and size cell counts are wrong and we don't calculate the final physical device resource values correctly at all. Commit 5280267c1dddb8d413595b87dc406624bb497946 ("sparc: Fix handling of LANCE and ESP parent nodes in of_device.c") was meant to fix this problem, but that only influences the inner loop of build_device_resources(). We need this logic to also kick in at the beginning of build_device_resources() as well, when we make the first attempt to determine the device's immediate parent bus type for 'reg' property element extraction. Based almost entirely upon a patch by Friedrich Oslage. Tested-by: Meelis Roos Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c index 0a83bd7..c8f14c1 100644 --- a/arch/sparc/kernel/of_device_32.c +++ b/arch/sparc/kernel/of_device_32.c @@ -246,8 +246,25 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags) static int of_bus_sbus_match(struct device_node *np) { - return !strcmp(np->name, "sbus") || - !strcmp(np->name, "sbi"); + struct device_node *dp = np; + + while (dp) { + if (!strcmp(dp->name, "sbus") || + !strcmp(dp->name, "sbi")) + return 1; + + /* Have a look at use_1to1_mapping(). We're trying + * to match SBUS if that's the top-level bus and we + * don't have some intervening real bus that provides + * ranges based translations. + */ + if (of_find_property(dp, "ranges", NULL) != NULL) + break; + + dp = dp->parent; + } + + return 0; } static void of_bus_sbus_count_cells(struct device_node *child, diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index 27381f1..5ac287a 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -300,8 +300,25 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags) static int of_bus_sbus_match(struct device_node *np) { - return !strcmp(np->name, "sbus") || - !strcmp(np->name, "sbi"); + struct device_node *dp = np; + + while (dp) { + if (!strcmp(dp->name, "sbus") || + !strcmp(dp->name, "sbi")) + return 1; + + /* Have a look at use_1to1_mapping(). We're trying + * to match SBUS if that's the top-level bus and we + * don't have some intervening real bus that provides + * ranges based translations. + */ + if (of_find_property(dp, "ranges", NULL) != NULL) + break; + + dp = dp->parent; + } + + return 0; } static void of_bus_sbus_count_cells(struct device_node *child, -- cgit v0.10.2 From 99894a799f09cf9e28296bb16e75bd5830fd2c4e Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 29 Mar 2009 16:31:25 +0300 Subject: KVM: MMU: Fix off-by-one calculating large page count The large page initialization code concludes there are two large pages spanned by a slot covering 1 (small) page starting at gfn 1. This is incorrect, and also results in incorrect write_count initialization in some cases (base = 1, npages = 513 for example). Cc: stable@kernel.org Signed-off-by: Avi Kivity diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 605697e..28d693a 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -920,6 +920,7 @@ int __kvm_set_memory_region(struct kvm *kvm, int r; gfn_t base_gfn; unsigned long npages; + int largepages; unsigned long i; struct kvm_memory_slot *memslot; struct kvm_memory_slot old, new; @@ -995,11 +996,8 @@ int __kvm_set_memory_region(struct kvm *kvm, new.userspace_addr = 0; } if (npages && !new.lpage_info) { - int largepages = npages / KVM_PAGES_PER_HPAGE; - if (npages % KVM_PAGES_PER_HPAGE) - largepages++; - if (base_gfn % KVM_PAGES_PER_HPAGE) - largepages++; + largepages = 1 + (base_gfn + npages - 1) / KVM_PAGES_PER_HPAGE; + largepages -= base_gfn / KVM_PAGES_PER_HPAGE; new.lpage_info = vmalloc(largepages * sizeof(*new.lpage_info)); -- cgit v0.10.2 From d24d2c1cc4156102f9df9cd0425d58cabf955519 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 9 Apr 2009 16:38:14 +0200 Subject: KVM: ia64: fix locking order entering guest Reorder locking as down_read() may return with local interrupts enabled, which means we could go into vti_vcpu_run() with interrupts enabled. This caused random crashes on the Altix as the timer interrupt tried to read a memory mapped clock source, for which the TLB had not yet been reinstated in the exit, before ipsr was retored. Signed-off-by: Jes Sorensen Acked-by: Xiantao Zhang Signed-off-by: Avi Kivity diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 28af6a7..d20a5db 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -610,20 +610,22 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) int r; again: - preempt_disable(); - local_irq_disable(); - if (signal_pending(current)) { - local_irq_enable(); - preempt_enable(); r = -EINTR; kvm_run->exit_reason = KVM_EXIT_INTR; goto out; } + /* + * down_read() may sleep and return with interrupts enabled + */ + down_read(&vcpu->kvm->slots_lock); + + preempt_disable(); + local_irq_disable(); + vcpu->guest_mode = 1; kvm_guest_enter(); - down_read(&vcpu->kvm->slots_lock); r = vti_vcpu_run(vcpu, kvm_run); if (r < 0) { local_irq_enable(); -- cgit v0.10.2 From bf47a760f66add7870fba33ab50f58b550d6bbd1 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Sun, 5 Apr 2009 14:54:46 -0300 Subject: KVM: MMU: disable global page optimization Complexity to fix it not worthwhile the gains, as discussed in http://article.gmane.org/gmane.comp.emulators.kvm.devel/28649. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 2a36f7f..b6caf13 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1248,7 +1248,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu, pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word); sp->gfn = gfn; sp->role = role; - sp->global = role.cr4_pge; + sp->global = 0; hlist_add_head(&sp->hash_link, bucket); if (!direct) { if (rmap_write_protect(vcpu->kvm, gfn)) -- cgit v0.10.2 From 4cd481f68dde99ac416003b825c835f71e364393 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Mon, 13 Apr 2009 11:59:32 +0200 Subject: KVM: Fix overlapping check for memory slots When checking for overlapping slots on registration of a new one, kvm currently also considers zero-length (ie. deleted) slots and rejects requests incorrectly. This finally denies user space from joining slots. Fix the check by skipping deleted slots and advertise this via a KVM_CAP_JOIN_MEMORY_REGIONS_WORKS. Cc: stable@kernel.org Signed-off-by: Jan Kiszka Signed-off-by: Avi Kivity diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 311a073..8cc1379 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -409,6 +409,8 @@ struct kvm_trace_rec { #ifdef __KVM_HAVE_DEVICE_ASSIGNMENT #define KVM_CAP_DEVICE_DEASSIGNMENT 27 #endif +/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */ +#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 28d693a..1ecbe23 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -961,7 +961,7 @@ int __kvm_set_memory_region(struct kvm *kvm, for (i = 0; i < KVM_MEMORY_SLOTS; ++i) { struct kvm_memory_slot *s = &kvm->memslots[i]; - if (s == memslot) + if (s == memslot || !s->npages) continue; if (!((base_gfn + npages <= s->base_gfn) || (base_gfn >= s->base_gfn + s->npages))) @@ -1983,6 +1983,7 @@ static long kvm_dev_ioctl_check_extension_generic(long arg) switch (arg) { case KVM_CAP_USER_MEMORY: case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: + case KVM_CAP_JOIN_MEMORY_REGIONS_WORKS: return 1; #ifdef CONFIG_HAVE_KVM_IRQCHIP case KVM_CAP_IRQ_ROUTING: -- cgit v0.10.2 From 7f1ea208968f021943d4103ba59e06bb6d8239cb Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 25 Feb 2009 16:08:31 +0100 Subject: KVM: x86: release time_page on vcpu destruction Not releasing the time_page causes a leak of that page or the compound page it is situated in. Cc: stable@kernel.org Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8ca100a..a1ecec5 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4159,6 +4159,11 @@ EXPORT_SYMBOL_GPL(kvm_put_guest_fpu); void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) { + if (vcpu->arch.time_page) { + kvm_release_page_dirty(vcpu->arch.time_page); + vcpu->arch.time_page = NULL; + } + kvm_x86_ops->vcpu_free(vcpu); } -- cgit v0.10.2 From 888d256e9c565cb61505bd218eb37c81fe77a325 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 17 Apr 2009 19:24:58 +0200 Subject: KVM: Unregister cpufreq notifier on unload Properly unregister cpufreq notifier on onload if it was registered during init. Signed-off-by: Jan Kiszka Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index a1ecec5..7c1ce5a 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2775,6 +2775,9 @@ out: void kvm_arch_exit(void) { + if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + cpufreq_unregister_notifier(&kvmclock_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); kvm_x86_ops = NULL; kvm_mmu_module_exit(); } -- cgit v0.10.2 From 92ea599c9757bc31c279b34737fd79a4f074f91c Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 23:16:21 +1000 Subject: m68knommu: update the default config for the ColdFire 5249EVB. Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig index cc64583..2efba32 100644 --- a/arch/m68knommu/configs/m5249evb_defconfig +++ b/arch/m68knommu/configs/m5249evb_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 17:32:41 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -29,11 +31,23 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -41,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -92,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -144,45 +151,103 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -194,6 +259,7 @@ CONFIG_BINFMT_FLAT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -259,6 +325,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -266,14 +337,15 @@ CONFIG_MTD_UCLINUX=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -285,6 +357,56 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # @@ -302,7 +424,7 @@ CONFIG_HAVE_IDE=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -315,7 +437,6 @@ CONFIG_HAVE_IDE=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -323,7 +444,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -334,19 +456,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -356,11 +482,13 @@ CONFIG_SSB_POSSIBLE=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y # # Graphics support @@ -374,10 +502,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -385,7 +509,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -393,19 +520,28 @@ CONFIG_SSB_POSSIBLE=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -427,10 +563,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -440,13 +573,21 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -454,6 +595,7 @@ CONFIG_ROMFS_FS=y # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set +# CONFIG_DLM is not set # # Kernel hacking @@ -468,10 +610,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -480,18 +626,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From 2d4f9efa2a529f352dafd41a616c91531bb13ccd Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 23:30:48 +1000 Subject: m68knommu: update the default config for the ColdFire 5257EVB board Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig index 0d1256f..dc5c621 100644 --- a/arch/m68knommu/configs/m5275evb_defconfig +++ b/arch/m68knommu/configs/m5275evb_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 23:29:01 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -44,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -148,44 +152,39 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -226,6 +225,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -235,7 +235,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -246,14 +248,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -333,6 +329,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -347,6 +348,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -360,7 +362,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -370,10 +372,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC=y CONFIG_FEC2=y @@ -385,8 +392,10 @@ CONFIG_FEC2=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -421,7 +430,7 @@ CONFIG_SLHC=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -434,7 +443,6 @@ CONFIG_SLHC=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -442,7 +450,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -453,19 +462,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -476,6 +489,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -494,10 +508,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -505,7 +515,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -513,12 +526,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -527,6 +542,11 @@ CONFIG_EXT2_FS=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -548,10 +568,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -561,21 +578,21 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -598,10 +615,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -610,18 +631,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From 7a6f9cbb37120c745fc187083fb5c3de4dca4f97 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 21 Apr 2009 20:00:37 +0200 Subject: x86: hpet: fix periodic mode programming on AMD 81xx (See http://bugzilla.kernel.org/show_bug.cgi?id=12961) It partially reverts commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403 (x86: hpet: stop HPET_COUNTER when programming periodic mode) HPET on AMD 81xx chipset needs a second write (with HPET_TN_SETVAL cleared) to T0_CMP register to set the period in periodic mode. With this patch HPET_COUNTER is still stopped but not reset when HPET is programmed in periodic mode. This should help to avoid races when HPET is programmed in periodic mode and fixes a boot time hang that I've observed on a machine when using 1000HZ. [ Impact: fix boot time hang on machines with AMD 81xx chipset ] Reported-by: Jeff Mahoney Signed-off-by: Andreas Herrmann Tested-by: Jeff Mahoney LKML-Reference: <20090421180037.GA2763@alberich.amd.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 3f0019e..81408b9 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -236,6 +236,10 @@ static void hpet_stop_counter(void) unsigned long cfg = hpet_readl(HPET_CFG); cfg &= ~HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); +} + +static void hpet_reset_counter(void) +{ hpet_writel(0, HPET_COUNTER); hpet_writel(0, HPET_COUNTER + 4); } @@ -250,6 +254,7 @@ static void hpet_start_counter(void) static void hpet_restart_counter(void) { hpet_stop_counter(); + hpet_reset_counter(); hpet_start_counter(); } @@ -309,7 +314,7 @@ static int hpet_setup_msi_irq(unsigned int irq); static void hpet_set_mode(enum clock_event_mode mode, struct clock_event_device *evt, int timer) { - unsigned long cfg; + unsigned long cfg, cmp, now; uint64_t delta; switch (mode) { @@ -317,12 +322,23 @@ static void hpet_set_mode(enum clock_event_mode mode, hpet_stop_counter(); delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult; delta >>= evt->shift; + now = hpet_readl(HPET_COUNTER); + cmp = now + (unsigned long) delta; cfg = hpet_readl(HPET_Tn_CFG(timer)); /* Make sure we use edge triggered interrupts */ cfg &= ~HPET_TN_LEVEL; cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | HPET_TN_32BIT; hpet_writel(cfg, HPET_Tn_CFG(timer)); + hpet_writel(cmp, HPET_Tn_CMP(timer)); + udelay(1); + /* + * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL + * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL + * bit is automatically cleared after the first write. + * (See AMD-8111 HyperTransport I/O Hub Data Sheet, + * Publication # 24674) + */ hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer)); hpet_start_counter(); hpet_print_config(); -- cgit v0.10.2 From 73fc267615fd547538d4afb602f51de6b5ab0a31 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 23 Apr 2009 00:11:23 +1000 Subject: m68knommu: update the default config for the ColdFire 5307C3 board Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig index fe2acdf..3a3f673 100644 --- a/arch/m68knommu/configs/m5307c3_defconfig +++ b/arch/m68knommu/configs/m5307c3_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,10 +34,21 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -44,44 +56,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,7 +100,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -127,12 +132,11 @@ CONFIG_CLOCK_DIV=2 # # CONFIG_ARN5307 is not set CONFIG_M5307C3=y -# CONFIG_eLIA is not set # CONFIG_SECUREEDGEMP3 is not set # CONFIG_CLEOPATRA is not set # CONFIG_NETtel is not set CONFIG_FREESCALE=y -# CONFIG_4KSTACKS is not set +CONFIG_4KSTACKS=y CONFIG_HZ=100 # @@ -153,45 +157,36 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_COMEMPCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -232,6 +227,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -241,7 +237,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -252,14 +250,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -274,7 +266,79 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -286,6 +350,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -299,7 +364,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -309,10 +374,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -322,8 +392,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -381,7 +453,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -394,13 +466,12 @@ CONFIG_INPUT=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_GEN_RTC is not set @@ -413,19 +484,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -436,6 +511,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -454,10 +530,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -466,7 +538,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -474,12 +549,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -488,6 +565,11 @@ CONFIG_EXT2_FS=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -509,10 +591,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -520,14 +599,22 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -551,10 +638,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_FULLDEBUG=y # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -563,18 +654,22 @@ CONFIG_FULLDEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From c5428e950ad42640f00092949fd17e356dfdeafa Mon Sep 17 00:00:00 2001 From: Coly Li Date: Wed, 22 Apr 2009 23:21:56 +0800 Subject: uv_time: add parameter to uv_read_rtc() uv_read_rtc() is referenced by read member of struct clocksource clocksource_uv. In include/linux/clocksource.h, read of struct clocksource is declared as: cycle_t (*read)(struct clocksource *cs) This got introduced recently in: 8e19608: clocksource: pass clocksource to read() callback But arch/x86/kernel/uv_time.c was not properly converted by that pach. This patch adds a dummy parameter (struct clocksource type) to uv_read_rtc() to fix the incompatible reference in clocksource_uv, and add a NULL parameter in all places where uv_read_rtc() gets called. [ Impact: cleanup, address compiler warning ] Signed-off-by: Coly Li Cc: Dimitri Sivanich Cc: Magnus Damm Cc: Andrew Morton Cc: Hugh Dickins LKML-Reference: <49EF3614.1050806@suse.de> Signed-off-by: Ingo Molnar Cc: Dimitri Sivanich diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c index 2ffb6c5..583f11d 100644 --- a/arch/x86/kernel/uv_time.c +++ b/arch/x86/kernel/uv_time.c @@ -29,7 +29,7 @@ #define RTC_NAME "sgi_rtc" -static cycle_t uv_read_rtc(void); +static cycle_t uv_read_rtc(struct clocksource *cs); static int uv_rtc_next_event(unsigned long, struct clock_event_device *); static void uv_rtc_timer_setup(enum clock_event_mode, struct clock_event_device *); @@ -123,7 +123,7 @@ static int uv_setup_intr(int cpu, u64 expires) /* Initialize comparator value */ uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires); - return (expires < uv_read_rtc() && !uv_intr_pending(pnode)); + return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode)); } /* @@ -256,7 +256,7 @@ static int uv_rtc_unset_timer(int cpu) spin_lock_irqsave(&head->lock, flags); - if (head->next_cpu == bcpu && uv_read_rtc() >= *t) + if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t) rc = 1; *t = ULLONG_MAX; @@ -278,7 +278,7 @@ static int uv_rtc_unset_timer(int cpu) /* * Read the RTC. */ -static cycle_t uv_read_rtc(void) +static cycle_t uv_read_rtc(struct clocksource *cs) { return (cycle_t)uv_read_local_mmr(UVH_RTC); } @@ -291,7 +291,7 @@ static int uv_rtc_next_event(unsigned long delta, { int ced_cpu = cpumask_first(ced->cpumask); - return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc()); + return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc(NULL)); } /* -- cgit v0.10.2 From db2f38c22ea3f545be3b5772e5f9dc5861b74536 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 22 Apr 2009 20:33:40 +0200 Subject: palm_bk3710: UDMA performance fix Fix UDMA throughput bug: tCYC averages t2CYCTYP/2, but the code previously assumed it was the same as t2CYCTYP. (That is, it was using just one clock edge, not both.) Move the table's type declaration so it's adjacent to the table, making it more clear what those numbers mean. On one system this change increased throughput by almost 4x: UDMA/66 sometimes topped 23 MB/sec (on a drive known to do much better). On another system it was around a 10% win (UDMA/66 up to 7+ MB/sec). The difference might be caused by the ratio between memory and IDE clocks. In the system with large speedup, this was exactly 2 (as a workaround for a rev 1.1 silicon bug). The other system used a more standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch might have some issues, they're not unheard-of. Signed-off-by: David Brownell Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index c7acca0..d1513b4 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -39,14 +39,6 @@ /* Primary Control Offset */ #define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6 -/* - * PalmChip 3710 IDE Controller UDMA timing structure Definition - */ -struct palm_bk3710_udmatiming { - unsigned int rptime; /* Ready to pause time */ - unsigned int cycletime; /* Cycle Time */ -}; - #define BK3710_BMICP 0x00 #define BK3710_BMISP 0x02 #define BK3710_BMIDTP 0x04 @@ -75,13 +67,19 @@ struct palm_bk3710_udmatiming { static unsigned ideclk_period; /* in nanoseconds */ +struct palm_bk3710_udmatiming { + unsigned int rptime; /* tRP -- Ready to pause time (nsec) */ + unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */ + /* tENV is always a minimum of 20 nsec */ +}; + static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { - {160, 240}, /* UDMA Mode 0 */ - {125, 160}, /* UDMA Mode 1 */ - {100, 120}, /* UDMA Mode 2 */ - {100, 90}, /* UDMA Mode 3 */ - {100, 60}, /* UDMA Mode 4 */ - {85, 40}, /* UDMA Mode 5 */ + {160, 240 / 2,}, /* UDMA Mode 0 */ + {125, 160 / 2,}, /* UDMA Mode 1 */ + {100, 120 / 2,}, /* UDMA Mode 2 */ + {100, 90 / 2,}, /* UDMA Mode 3 */ + {100, 60 / 2,}, /* UDMA Mode 4 */ + {85, 40 / 2,}, /* UDMA Mode 5 */ }; static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, -- cgit v0.10.2 From a1f9a89c90b4ac143c5b6054c2a157572b272cd2 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 22 Apr 2009 20:33:40 +0200 Subject: ide-cd: fix kernel crash on hppa regression With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture due to ide-cd when udev creates the device nodes at startup: Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024) IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0 IIR: 4ab30048 ISR: 00000000 IOR: 00000024 CPU: 0 CR30: 8ed34000 CR31: ffff55ff ORIG_R28: 00000000 IAOQ[0]: ide_complete_rq+0x2c/0x70 IAOQ[1]: ide_complete_rq+0x30/0x70 RP(r2): cdrom_newpc_intr+0x178/0x46c Backtrace: [<1035c608>] cdrom_newpc_intr+0x178/0x46c [<1034c494>] ide_intr+0x1b0/0x214 [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<102f7864>] superio_interrupt+0x88/0xbc [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<10112efc>] do_cpu_irq_mask+0x9c/0xd0 [<10116068>] intr_return+0x0/0x4 This crash seems to happen due to an uninitialized variable "rc". The compiler even warns about that: CC drivers/ide/ide-cd.o /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr': /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function After applying the trivial patch below, which just initializes the variable to zero, the kernel doesn't crash any longer: Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events... hda: command error: status=0x51 { DriveReady SeekComplete Error } hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown done. Signed-off-by: Helge Deller Acked-by: Borislav Petkov Cc: Linus Cc: Kyle McMartin Cc: "Rafael J. Wysocki" Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3aec19d..3d4e099 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -609,7 +609,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) struct request *rq = hwif->rq; ide_expiry_t *expiry = NULL; int dma_error = 0, dma, thislen, uptodate = 0; - int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc, nsectors; + int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors; int sense = blk_sense_request(rq); unsigned int timeout; u16 len; -- cgit v0.10.2 From b0aedb04eae79372fbe101d98513773d6b89935d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Wed, 22 Apr 2009 20:33:41 +0200 Subject: ide: Stop disks on reboot for laptop which cuts power MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My laptop (Acer Travelmate 660) always cuts the power when rebooting which causes the disk to emergency-park it's head. Add a dmi check to stop disk as for shutdown on this laptop. Signed-off-by: Bruno Prémont Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 1aebdf1..4b6b71e 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -7,6 +7,7 @@ #include #include #include +#include #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) #define IDE_DISK_MINORS (1 << PARTN_BITS) @@ -99,6 +100,19 @@ static void ide_gd_resume(ide_drive_t *drive) (void)drive->disk_ops->get_capacity(drive); } +static const struct dmi_system_id ide_coldreboot_table[] = { + { + /* Acer TravelMate 66x cuts power during reboot */ + .ident = "Acer TravelMate 660", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"), + }, + }, + + { } /* terminate list */ +}; + static void ide_gd_shutdown(ide_drive_t *drive) { #ifdef CONFIG_ALPHA @@ -115,7 +129,8 @@ static void ide_gd_shutdown(ide_drive_t *drive) the disk to expire its write cache. */ if (system_state != SYSTEM_POWER_OFF) { #else - if (system_state == SYSTEM_RESTART) { + if (system_state == SYSTEM_RESTART && + !dmi_check_system(ide_coldreboot_table)) { #endif drive->disk_ops->flush(drive); return; -- cgit v0.10.2 From 83cff839268feb2f31ae7667b9b2b7641dc10575 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 22 Apr 2009 20:33:41 +0200 Subject: mediabay: fix build for CONFIG_BLOCK=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote: > Observed the following build error: > --- > CC drivers/macintosh/mediabay.o > In file included from drivers/macintosh/mediabay.c:21: > include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete > type > make[2]: *** [drivers/macintosh/mediabay.o] Error 1 > make[1]: *** [drivers/macintosh] Error 2 > make: *** [drivers] Error 2 > --- mediabay shouldn't include unconditionally so remove the superfluous include from mediabay.c ( will pull in for CONFIG_BLK_DEV_IDE_PMAC=y). Reported-by: Subrata Modak Cc: Paul Mackerras Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index d7e46d3..eca55ef 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 2d138ae09935cec055f65d18300727a7a46d92b9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 Apr 2009 21:22:42 +0200 Subject: scsi: a4000 - Correct driver unregistration in case of failure commit 7a192ec334cab9fafe3a8665a65af398b0e24730 ("platform driver: fix incorrect use of 'platform_bus_type' with 'struct device_driver') turned a driver_UNregister into platform_driver_REGISTER. Correct this to platform_driver_UNregister. Signed-off-by: Geert Uytterhoeven diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c index 61af3d9..e3519fa 100644 --- a/drivers/scsi/a4000t.c +++ b/drivers/scsi/a4000t.c @@ -129,7 +129,7 @@ static int __init a4000t_scsi_init(void) a4000t_scsi_device = platform_device_register_simple("a4000t-scsi", -1, NULL, 0); if (IS_ERR(a4000t_scsi_device)) { - platform_driver_register(&a4000t_scsi_driver); + platform_driver_unregister(&a4000t_scsi_driver); return PTR_ERR(a4000t_scsi_device); } -- cgit v0.10.2 From cc7c0fa3b90a047751f50371639b90dc119e63ea Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 Apr 2009 22:23:51 +0200 Subject: m68k,m68knommu: Wire up preadv and pwritev Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 3c19027..aa29a86 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -332,10 +332,12 @@ #define __NR_dup3 326 #define __NR_pipe2 327 #define __NR_inotify_init1 328 +#define __NR_preadv 329 +#define __NR_pwritev 330 #ifdef __KERNEL__ -#define NR_syscalls 329 +#define NR_syscalls 331 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 5c332f2..8744f60 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -753,4 +753,6 @@ sys_call_table: .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 330 */ diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index 1017e76..c0b8782 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -347,6 +347,8 @@ ENTRY(sys_call_table) .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 330 */ .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall -- cgit v0.10.2 From adfe7c69891128f5e238a5e6823709b4bb85b340 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 29 Mar 2009 14:23:44 +0200 Subject: m68k: Update defconfigs for 2.6.30-rc3 Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 23597be..0f69fa5 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:42 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:52 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -157,7 +169,7 @@ CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -# CONFIG_HEARTBEAT is not set +CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ISA=y CONFIG_GENERIC_ISA_DMA=y @@ -184,7 +196,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set @@ -258,6 +273,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +282,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +293,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +372,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +407,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +421,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -453,15 +468,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -469,7 +489,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -478,7 +497,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_GAYLE=y -CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y # CONFIG_BLK_DEV_IDEDMA is not set @@ -530,6 +548,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -547,6 +567,7 @@ CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -554,7 +575,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -567,6 +588,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -577,14 +599,16 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -CONFIG_ARIADNE=m -CONFIG_A2065=m -CONFIG_HYDRA=m -CONFIG_ZORRO8390=m -CONFIG_APNE=m +CONFIG_ARIADNE=y +CONFIG_A2065=y +CONFIG_HYDRA=y +CONFIG_ZORRO8390=y +CONFIG_APNE=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -609,7 +633,10 @@ CONFIG_APNE=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -719,7 +746,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_A2232=m +CONFIG_A2232=y # # Serial drivers @@ -730,6 +757,7 @@ CONFIG_A2232=m # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -821,6 +849,7 @@ CONFIG_FB_FM2=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -856,7 +885,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -867,14 +895,13 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_MULTIFACE_III_TTY=m -# CONFIG_SERIAL_CONSOLE is not set +CONFIG_SERIAL_CONSOLE=y # # File systems @@ -883,6 +910,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -909,13 +937,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -924,6 +954,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -935,8 +970,8 @@ CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -954,10 +989,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -966,6 +998,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -976,23 +1011,24 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=m +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1067,11 +1103,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1092,13 +1123,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1113,7 +1152,7 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m @@ -1132,7 +1171,7 @@ CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m @@ -1154,7 +1193,7 @@ CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m @@ -1168,6 +1207,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1175,11 +1215,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1191,10 +1233,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 935108d..5fff581 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:43 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:54 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -256,6 +268,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -264,6 +277,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -274,6 +288,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -352,25 +367,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -392,8 +402,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -404,8 +416,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,9 +453,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -491,8 +507,11 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -522,6 +542,8 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -538,7 +560,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -596,7 +621,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -636,6 +660,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -718,6 +743,7 @@ CONFIG_FB_APOLLO=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -749,7 +775,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -774,6 +799,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -800,13 +826,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -815,6 +843,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -845,10 +878,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -857,6 +887,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -867,6 +900,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -883,7 +917,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -958,11 +991,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -983,13 +1011,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1059,6 +1095,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1066,11 +1103,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1082,10 +1121,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index a594a1d..d92a90e 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:44 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:56 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -180,7 +192,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set @@ -254,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -262,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -272,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -350,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -390,8 +403,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -402,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -445,15 +460,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -461,7 +481,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -516,11 +535,14 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ATARI_SCSI=y # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set # CONFIG_ATARI_SCSI_RESET_BOOT is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -528,7 +550,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -541,6 +563,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -550,7 +573,9 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ATARILANCE=m +CONFIG_ATARILANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -568,7 +593,10 @@ CONFIG_ATARILANCE=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -625,11 +653,10 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_ATARI_KBD_CORE=y CONFIG_KEYBOARD_ATARI=y CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -649,7 +676,7 @@ CONFIG_INPUT_M68K_BEEP=m CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -673,6 +700,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -760,6 +788,7 @@ CONFIG_FB_ATARI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -794,7 +823,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -805,14 +833,14 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # -CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_MIDI=m +CONFIG_ATARI_MFPSER=y +CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m +CONFIG_SERIAL_CONSOLE=y # # File systems @@ -821,6 +849,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -847,13 +876,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -862,6 +893,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -892,10 +928,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -904,6 +937,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -914,22 +950,24 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set +CONFIG_NFS_V4=y +# CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=m +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1004,11 +1042,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1029,13 +1062,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1050,7 +1091,7 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m @@ -1069,7 +1110,7 @@ CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m @@ -1091,7 +1132,7 @@ CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m @@ -1105,6 +1146,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1112,11 +1154,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1128,10 +1172,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index d3d9814..6e6b1aa 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:45 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:59 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_BVME6000_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,6 +547,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_BVME6000_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -543,7 +565,10 @@ CONFIG_BVME6000_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -717,7 +742,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -742,6 +766,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -768,13 +793,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -783,6 +810,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -813,10 +845,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -825,6 +854,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -835,6 +867,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -851,7 +884,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -927,11 +959,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -952,13 +979,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1028,6 +1063,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1035,11 +1071,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=m +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1051,10 +1089,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 5556ef0..bc0565f 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:46 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:01 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -141,12 +152,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -257,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -265,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -275,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -353,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -393,8 +403,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -405,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -442,9 +454,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -492,8 +508,11 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -501,7 +520,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -514,6 +533,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -524,6 +544,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_HPLANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -540,7 +562,10 @@ CONFIG_HPLANCE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -646,6 +670,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -728,6 +753,7 @@ CONFIG_FB_HP300=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -759,7 +785,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -767,9 +792,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -782,6 +807,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -808,13 +834,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -823,6 +851,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -853,10 +886,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -865,6 +895,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -875,6 +908,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -891,7 +925,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -966,11 +999,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -991,13 +1019,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1067,6 +1103,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1074,11 +1111,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1090,10 +1129,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index c6de257..9991b64 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:47 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:03 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -142,12 +153,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -429,6 +441,7 @@ CONFIG_CONNECTOR=m # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_SWIM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m @@ -443,15 +456,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -459,7 +477,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -514,10 +531,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -525,7 +545,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -547,6 +567,7 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -561,6 +582,8 @@ CONFIG_MAC89x0=m CONFIG_MACSONIC=m CONFIG_MACMACE=y # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -577,7 +600,10 @@ CONFIG_MACMACE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -635,7 +661,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -677,6 +702,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -760,6 +786,7 @@ CONFIG_FB_MAC=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -793,7 +820,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -801,9 +827,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -819,6 +845,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -845,13 +872,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -860,6 +889,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -890,10 +924,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=y @@ -902,6 +933,9 @@ CONFIG_HFSPLUS_FS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -912,6 +946,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -927,7 +962,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1003,11 +1037,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1028,13 +1057,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1104,6 +1141,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1111,11 +1149,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1127,10 +1167,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 7069358..69c43e2 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:48 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:06 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -146,12 +157,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -268,6 +280,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -276,6 +289,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -286,6 +300,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -364,25 +379,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -408,8 +418,10 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -420,8 +432,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +466,7 @@ CONFIG_PARPORT_NOT_PC=y CONFIG_BLK_DEV=y CONFIG_AMIGA_FLOPPY=y CONFIG_ATARI_FLOPPY=y +CONFIG_BLK_DEV_SWIM=y CONFIG_AMIGA_Z2RAM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -469,15 +482,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -485,7 +503,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -494,7 +511,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_GAYLE=y -CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_BLK_DEV_MAC_IDE=y @@ -549,6 +565,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -575,6 +593,7 @@ CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -582,7 +601,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -604,6 +623,7 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -614,24 +634,26 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ARIADNE=m -CONFIG_A2065=m -CONFIG_HYDRA=m -CONFIG_ZORRO8390=m -CONFIG_APNE=m +CONFIG_ARIADNE=y +CONFIG_A2065=y +CONFIG_HYDRA=y +CONFIG_ZORRO8390=y +CONFIG_APNE=y CONFIG_MAC8390=y -CONFIG_MAC89x0=m -CONFIG_MACSONIC=m +CONFIG_MAC89x0=y +CONFIG_MACSONIC=y CONFIG_MACMACE=y CONFIG_MVME147_NET=y CONFIG_MVME16x_NET=y CONFIG_BVME6000_NET=y -CONFIG_ATARILANCE=m +CONFIG_ATARILANCE=y CONFIG_SUN3LANCE=y CONFIG_HPLANCE=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -657,7 +679,10 @@ CONFIG_NE2000=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -717,11 +742,10 @@ CONFIG_KEYBOARD_ATARI=y CONFIG_KEYBOARD_HIL_OLD=y CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -732,7 +756,7 @@ CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_AMIGA=m CONFIG_MOUSE_ATARI=m # CONFIG_MOUSE_VSXXXAA is not set -CONFIG_MOUSE_HIL=m +CONFIG_MOUSE_HIL=y CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set # CONFIG_JOYSTICK_A3D is not set @@ -763,18 +787,18 @@ CONFIG_JOYSTICK_AMIGA=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m # CONFIG_INPUT_UINPUT is not set -CONFIG_HP_SDC_RTC=m +CONFIG_HP_SDC_RTC=y # # Hardware I/O ports # CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_Q40KBD=m +CONFIG_SERIO_Q40KBD=y # CONFIG_SERIO_PARKBD is not set CONFIG_HP_SDC=y CONFIG_HIL_MLC=y -CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -788,7 +812,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_A2232=m +CONFIG_A2232=y # # Serial drivers @@ -799,6 +823,7 @@ CONFIG_A2232=m # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -807,7 +832,7 @@ CONFIG_PRINTER=m # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=m +CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -898,6 +923,7 @@ CONFIG_FB_HP300=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -937,7 +963,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -948,13 +973,12 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # -CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_MIDI=m +CONFIG_ATARI_MFPSER=y +CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_MULTIFACE_III_TTY=m @@ -974,6 +998,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1000,13 +1025,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -1015,6 +1042,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -1045,10 +1077,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=y @@ -1057,6 +1086,9 @@ CONFIG_HFSPLUS_FS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -1067,6 +1099,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1083,7 +1116,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1163,11 +1195,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1188,13 +1215,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1264,6 +1299,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1271,11 +1307,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1287,10 +1325,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 52d4271..7dceb5d 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:50 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:08 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,9 +509,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_MVME147_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -503,7 +522,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -516,6 +535,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -526,6 +546,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MVME147_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -542,7 +564,10 @@ CONFIG_MVME147_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -640,6 +664,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -716,7 +741,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -724,9 +748,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -741,6 +765,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -767,13 +792,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -782,6 +809,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -812,10 +844,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -824,6 +853,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -834,6 +866,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -850,7 +883,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -926,11 +958,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -951,13 +978,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1027,6 +1062,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1034,11 +1070,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1050,10 +1088,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 3403ed2..890594f 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:51 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:10 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_MVME16x_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,6 +547,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MVME16x_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -543,7 +565,10 @@ CONFIG_MVME16x_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -717,7 +742,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -743,6 +767,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -769,13 +794,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -784,6 +811,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -814,10 +846,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -826,6 +855,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -836,6 +868,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -852,7 +885,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -928,11 +960,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -953,13 +980,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1029,6 +1064,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1036,11 +1072,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1052,10 +1090,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 3459c59..7cf58c2 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:52 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:13 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -391,8 +401,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,15 +453,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -457,7 +474,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -516,6 +532,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -527,6 +545,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -534,7 +553,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -547,6 +566,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -559,7 +579,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -584,7 +606,10 @@ CONFIG_NE2000=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -642,7 +667,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -688,6 +712,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -771,6 +796,7 @@ CONFIG_FB_Q40=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -805,7 +831,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -813,9 +838,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -828,6 +853,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -854,13 +880,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -869,6 +897,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -899,10 +932,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -911,6 +941,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -921,6 +954,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -936,7 +970,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1011,11 +1044,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1036,13 +1064,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1112,6 +1148,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1119,11 +1156,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1135,10 +1174,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index f404917..f27c1a4 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:53 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:16 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -138,12 +149,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -253,6 +265,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -261,6 +274,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -271,6 +285,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -349,25 +364,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -389,8 +399,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -401,8 +413,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -438,9 +450,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -488,9 +504,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -498,7 +517,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -511,6 +530,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -522,6 +542,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_SUN3LANCE=y CONFIG_SUN3_82586=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -537,7 +559,10 @@ CONFIG_SUN3_82586=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -595,7 +620,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -635,6 +659,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -710,6 +735,7 @@ CONFIG_FB=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -741,16 +767,15 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -763,6 +788,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -789,13 +815,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -804,6 +832,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -834,10 +867,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -846,6 +876,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -856,6 +889,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -872,7 +906,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -948,11 +981,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -973,13 +1001,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1049,6 +1085,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1056,11 +1093,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1072,9 +1111,12 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 4d8a1e8..c40edb9 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:54 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:20 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -391,8 +401,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -440,9 +452,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -490,9 +506,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3X_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -523,6 +543,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_SUN3LANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -539,7 +561,10 @@ CONFIG_SUN3LANCE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -597,7 +622,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -637,6 +661,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -718,6 +743,7 @@ CONFIG_FB=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -749,7 +775,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -772,6 +797,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -798,13 +824,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -813,6 +841,11 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -843,10 +876,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -855,6 +885,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -865,6 +898,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -881,7 +915,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -957,11 +990,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -982,13 +1010,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1058,6 +1094,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1065,11 +1102,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1081,10 +1120,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From 162dedd39dcc6eca3fc0d29cf19658c6c13b840e Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 3 Apr 2009 06:34:00 -0700 Subject: PCI quirk: disable MSI on VIA VT3364 chipsets Without this patch, Broadcom BCM5906 Ethernet controllers set up via MSI cause the machine to hang. Tejun agreed that the best is to blacklist the whole chipset and after adding it, seeing the other VIA quirks disabling MSI, this very much looks like the right way. Cc: Signed-off-by: Thomas Renninger Signed-off-by: Jesse Barnes diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 0254741..3067673 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2033,6 +2033,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_di DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); /* Disable MSI on chipsets that are known to not support it */ static void __devinit quirk_disable_msi(struct pci_dev *dev) -- cgit v0.10.2 From 6298c512bc1007c3ff5c9ce20e6996781651cc45 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 9 Apr 2009 12:28:22 +0200 Subject: x86, mce: make polling timer interval per CPU The polling timer while running per CPU still uses a global next_interval variable, which lead to some CPUs either polling too fast or too slow. This was not a serious problem because all errors get picked up eventually, but it's still better to avoid it. Turn next_interval into a per cpu variable. v2: Fix check_interval == 0 case (Hidetoshi Seto) [ Impact: minor bug fix ] Signed-off-by: Andi Kleen Reviewed-by: Hidetoshi Seto Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 863f895..82614f1 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -452,13 +452,14 @@ void mce_log_therm_throt_event(__u64 status) */ static int check_interval = 5 * 60; /* 5 minutes */ -static int next_interval; /* in jiffies */ +static DEFINE_PER_CPU(int, next_interval); /* in jiffies */ static void mcheck_timer(unsigned long); static DEFINE_PER_CPU(struct timer_list, mce_timer); static void mcheck_timer(unsigned long data) { struct timer_list *t = &per_cpu(mce_timer, data); + int *n; WARN_ON(smp_processor_id() != data); @@ -470,14 +471,14 @@ static void mcheck_timer(unsigned long data) * Alert userspace if needed. If we logged an MCE, reduce the * polling interval, otherwise increase the polling interval. */ + n = &__get_cpu_var(next_interval); if (mce_notify_user()) { - next_interval = max(next_interval/2, HZ/100); + *n = max(*n/2, HZ/100); } else { - next_interval = min(next_interval * 2, - (int)round_jiffies_relative(check_interval*HZ)); + *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ)); } - t->expires = jiffies + next_interval; + t->expires = jiffies + *n; add_timer(t); } @@ -632,14 +633,13 @@ static void mce_cpu_features(struct cpuinfo_x86 *c) static void mce_init_timer(void) { struct timer_list *t = &__get_cpu_var(mce_timer); + int *n = &__get_cpu_var(next_interval); - /* data race harmless because everyone sets to the same value */ - if (!next_interval) - next_interval = check_interval * HZ; - if (!next_interval) + *n = check_interval * HZ; + if (!*n) return; setup_timer(t, mcheck_timer, smp_processor_id()); - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + *n); add_timer(t); } @@ -907,7 +907,6 @@ static void mce_cpu_restart(void *data) /* Reinit MCEs after user configuration changes */ static void mce_restart(void) { - next_interval = check_interval * HZ; on_each_cpu(mce_cpu_restart, NULL, 1); } @@ -1110,7 +1109,8 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb, break; case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + + __get_cpu_var(next_interval)); add_timer_on(t, cpu); smp_call_function_single(cpu, mce_reenable_cpu, &action, 1); break; -- cgit v0.10.2 From 5679af4c1625a1534a4321e1ecc3c48a1cf65eb8 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 7 Apr 2009 17:06:55 +0200 Subject: x86, mce: fix boot logging logic The earlier patch to change the poller to a separate function subtly broke the boot logging logic. This could lead to machine checks getting logged at boot even when disabled or defaulting to off on some systems. Fix that. [ Impact: bug fix - avoid spurious MCE in log ] Signed-off-by: Andi Kleen Reviewed-by: Hidetoshi Seto Signed-off-by: H. Peter Anvin diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 563933e..4f8c199 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -137,6 +137,7 @@ DECLARE_PER_CPU(mce_banks_t, mce_poll_banks); enum mcp_flags { MCP_TIMESTAMP = (1 << 0), /* log time stamp */ MCP_UC = (1 << 1), /* log uncorrected errors */ + MCP_DONTLOG = (1 << 2), /* only clear, don't log */ }; extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b); diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 82614f1..6fb0b35 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -239,9 +239,10 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) * Don't get the IP here because it's unlikely to * have anything to do with the actual error location. */ - - mce_log(&m); - add_taint(TAINT_MACHINE_CHECK); + if (!(flags & MCP_DONTLOG)) { + mce_log(&m); + add_taint(TAINT_MACHINE_CHECK); + } /* * Clear state for this bank. @@ -585,7 +586,7 @@ static void mce_init(void *dummy) * Log the machine checks left over from the previous reset. */ bitmap_fill(all_banks, MAX_NR_BANKS); - machine_check_poll(MCP_UC, &all_banks); + machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks); set_in_cr4(X86_CR4_MCE); -- cgit v0.10.2 From 044cd80942e47b9de0915b627902adf05c52377f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 18 Apr 2009 01:43:46 -0700 Subject: x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case e820_all_mapped need end is (addr + size) instead of (addr + size - 1) Cc: stable@kernel.org Acked-by: Ingo Molnar Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 905bb52..5fa10bb 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -375,7 +375,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, if (!fixmem32) return AE_OK; if ((mcfg_res->start >= fixmem32->address) && - (mcfg_res->end < (fixmem32->address + + (mcfg_res->end <= (fixmem32->address + fixmem32->address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; @@ -392,7 +392,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, return AE_OK; if ((mcfg_res->start >= address.minimum) && - (mcfg_res->end < (address.minimum + address.address_length))) { + (mcfg_res->end <= (address.minimum + address.address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; } @@ -439,7 +439,7 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved, u64 old_size = size; int valid = 0; - while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) { + while (!is_reserved(addr, addr + size, E820_RESERVED)) { size >>= 1; if (size < (16UL<<20)) break; -- cgit v0.10.2 From 0bb1be3e30bfc3e09fa0ff1e887ac7da4a16c3a2 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 16 Apr 2009 13:31:10 -0600 Subject: x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86 Commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029 introduced a new function to set the PCI bus resources. Unfortunately, neither the author, nor the committers seemed to know that we already have somewhere to do that -- pcibios_fixup_bus(). This patch moves the hook (used only by the K8 code) into x86-specific code where it should have been in the first place. Cc: Yinghai Lu Signed-off-by: Matthew Wilcox Acked-by: Ingo Molnar Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 8c362b9..f80ece5 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -142,15 +142,20 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) } } +void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b) +{ +} + /* * Called after each bus is probed, but before its children * are examined. */ -void __devinit pcibios_fixup_bus(struct pci_bus *b) +void __devinit pcibios_fixup_bus(struct pci_bus *b) { struct pci_dev *dev; + set_pci_bus_resources_arch_default(b); pci_read_bridge_bases(b); list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 8eb50df..e3c3e08 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1118,10 +1118,6 @@ unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus) return max; } -void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b) -{ -} - struct pci_bus * pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata) { @@ -1180,8 +1176,6 @@ struct pci_bus * pci_create_bus(struct device *parent, b->resource[0] = &ioport_resource; b->resource[1] = &iomem_resource; - set_pci_bus_resources_arch_default(b); - return b; dev_create_file_err: -- cgit v0.10.2 From ca8e34f2b05a8289b47907b083dc01dd654ecbde Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 22 Apr 2009 16:27:12 -0500 Subject: eCryptfs: Lock lower directory inode mutex during lookup This patch locks the lower directory inode's i_mutex before calling lookup_one_len() to find the appropriate dentry in the lower filesystem. This bug was found thanks to the warning set in commit 2f9092e1. Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 5ed86e2..d832526 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -379,9 +379,11 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode, goto out_d_drop; } lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent); + mutex_lock(&lower_dir_dentry->d_inode->i_mutex); lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name, lower_dir_dentry, ecryptfs_dentry->d_name.len); + mutex_unlock(&lower_dir_dentry->d_inode->i_mutex); if (IS_ERR(lower_dentry)) { rc = PTR_ERR(lower_dentry); printk(KERN_ERR "%s: lookup_one_len() returned [%d] on " @@ -406,9 +408,11 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode, "filename; rc = [%d]\n", __func__, rc); goto out_d_drop; } + mutex_lock(&lower_dir_dentry->d_inode->i_mutex); lower_dentry = lookup_one_len(encrypted_and_encoded_name, lower_dir_dentry, encrypted_and_encoded_name_size - 1); + mutex_unlock(&lower_dir_dentry->d_inode->i_mutex); if (IS_ERR(lower_dentry)) { rc = PTR_ERR(lower_dentry); printk(KERN_ERR "%s: lookup_one_len() returned [%d] on " -- cgit v0.10.2 From 0e94ecd098347874e776f7818728613a335880d1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 18 Apr 2009 10:11:25 -0700 Subject: x86/PCI: set_pci_bus_resources_arch_default cleanups Rename set_pci_bus_resources_arch_default to x86_pci_root_bus_res_quirks, move the weak version from common.c to i386.c, and before calling, make sure it's a root bus. Reviewed-by: Matthew Wilcox Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 892b119..f44b49a 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -200,7 +200,7 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) } struct pci_bus; -void set_pci_bus_resources_arch_default(struct pci_bus *b); +void x86_pci_root_bus_res_quirks(struct pci_bus *b); #ifdef CONFIG_SMP #define mc_capable() (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids) diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 9bb0982..e121ee0 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -94,7 +94,7 @@ struct pci_root_info { static int pci_root_num; static struct pci_root_info pci_root_info[PCI_ROOT_NR]; -void set_pci_bus_resources_arch_default(struct pci_bus *b) +void x86_pci_root_bus_res_quirks(struct pci_bus *b) { int i; int j; diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index f80ece5..2202b62 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -142,10 +142,6 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) } } -void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b) -{ -} - /* * Called after each bus is probed, but before its children * are examined. @@ -155,7 +151,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b) { struct pci_dev *dev; - set_pci_bus_resources_arch_default(b); + /* root bus? */ + if (!b->parent) + x86_pci_root_bus_res_quirks(b); pci_read_bridge_bases(b); list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index f1817f7..a85bef2 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -238,6 +238,10 @@ void __init pcibios_resource_survey(void) */ fs_initcall(pcibios_assign_resources); +void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b) +{ +} + /* * If we set up a device for bus mastering, we need to check the latency * timer as certain crappy BIOSes forget to set it properly. -- cgit v0.10.2 From 681bf597215c62bd6f5ae1180a58a38997122b5b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 13 Apr 2009 18:28:54 -0700 Subject: PCI: cleanup debug output resources Remove outputs for 0 sized resources and indicate prefetchability. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 8d9da9d..a00f854 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -536,11 +536,13 @@ static void pci_bus_dump_res(struct pci_bus *bus) for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { struct resource *res = bus->resource[i]; - if (!res) + if (!res || !res->end) continue; dev_printk(KERN_DEBUG, &bus->dev, "resource %d %s %pR\n", i, - (res->flags & IORESOURCE_IO) ? "io: " : "mem:", res); + (res->flags & IORESOURCE_IO) ? "io: " : + ((res->flags & IORESOURCE_PREFETCH)? "pref mem":"mem:"), + res); } } -- cgit v0.10.2 From cffb2fafb726c898fec1c5ae33717741f94fda83 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 10 Apr 2009 15:17:50 -0700 Subject: docbooks: add/fix PCI kernel-doc Add drivers/pci/*.c source files to DocBook/kernel-api.tmpl and update those pci/*.c source files that need kernel-doc fixes. Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index d6ac5d6..44b3def 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -190,16 +190,20 @@ X!Ekernel/module.c !Edrivers/pci/pci.c !Edrivers/pci/pci-driver.c !Edrivers/pci/remove.c -!Edrivers/pci/pci-acpi.c !Edrivers/pci/search.c !Edrivers/pci/msi.c !Edrivers/pci/bus.c +!Edrivers/pci/access.c +!Edrivers/pci/irq.c +!Edrivers/pci/htirq.c !Edrivers/pci/probe.c +!Edrivers/pci/slot.c !Edrivers/pci/rom.c !Edrivers/pci/iov.c +!Idrivers/pci/pci-sysfs.c PCI Hotplug Support Library !Edrivers/pci/hotplug/pci_hotplug_core.c diff --git a/drivers/pci/access.c b/drivers/pci/access.c index 64dd7df..0f37065 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -87,8 +87,8 @@ EXPORT_SYMBOL(pci_read_vpd); * pci_write_vpd - Write entry to Vital Product Data * @dev: pci device struct * @pos: offset in vpd space - * @count: number of bytes to read - * @val: value to write + * @count: number of bytes to write + * @buf: buffer containing write data * */ ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf) diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c index bf7d6ce..6808d83 100644 --- a/drivers/pci/htirq.c +++ b/drivers/pci/htirq.c @@ -158,6 +158,7 @@ int ht_create_irq(struct pci_dev *dev, int idx) /** * ht_destroy_irq - destroy an irq created with ht_create_irq + * @irq: irq to be destroyed * * This reverses ht_create_irq removing the specified irq from * existence. The irq should be free before this happens. diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index a7eb1b4..85ebd02 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -492,6 +492,7 @@ write_vpd_attr(struct kobject *kobj, struct bin_attribute *bin_attr, /** * pci_read_legacy_io - read byte(s) from legacy I/O port space * @kobj: kobject corresponding to file to read from + * @bin_attr: struct bin_attribute for this file * @buf: buffer to store results * @off: offset into legacy I/O port space * @count: number of bytes to read @@ -517,6 +518,7 @@ pci_read_legacy_io(struct kobject *kobj, struct bin_attribute *bin_attr, /** * pci_write_legacy_io - write byte(s) to legacy I/O port space * @kobj: kobject corresponding to file to read from + * @bin_attr: struct bin_attribute for this file * @buf: buffer containing value to be written * @off: offset into legacy I/O port space * @count: number of bytes to write @@ -733,9 +735,9 @@ pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr, /** * pci_remove_resource_files - cleanup resource files - * @dev: dev to cleanup + * @pdev: dev to cleanup * - * If we created resource files for @dev, remove them from sysfs and + * If we created resource files for @pdev, remove them from sysfs and * free their resources. */ static void @@ -793,9 +795,9 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) /** * pci_create_resource_files - create resource files in sysfs for @dev - * @dev: dev in question + * @pdev: dev in question * - * Walk the resources in @dev creating files for each resource available. + * Walk the resources in @pdev creating files for each resource available. */ static int pci_create_resource_files(struct pci_dev *pdev) { @@ -829,6 +831,7 @@ void __weak pci_remove_resource_files(struct pci_dev *dev) { return; } /** * pci_write_rom - used to enable access to the PCI ROM display * @kobj: kernel object handle + * @bin_attr: struct bin_attribute for this file * @buf: user input * @off: file offset * @count: number of byte in input @@ -852,6 +855,7 @@ pci_write_rom(struct kobject *kobj, struct bin_attribute *bin_attr, /** * pci_read_rom - read a PCI ROM * @kobj: kernel object handle + * @bin_attr: struct bin_attribute for this file * @buf: where to put the data we read from the ROM * @off: file offset * @count: number of bytes to read diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 2118944..fe95ce2 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -264,8 +264,8 @@ EXPORT_SYMBOL_GPL(pci_create_slot); /** * pci_renumber_slot - update %struct pci_slot -> number - * @slot - %struct pci_slot to update - * @slot_nr - new number for slot + * @slot: &struct pci_slot to update + * @slot_nr: new number for slot * * The primary purpose of this interface is to allow callers who earlier * created a placeholder slot in pci_create_slot() by passing a -1 as -- cgit v0.10.2 From 3a6b42cadc112b01daf0525e5fcd90bb333a5bb3 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Thu, 16 Apr 2009 18:35:37 -0500 Subject: eCryptfs: Larger buffer for encrypted symlink targets When using filename encryption with eCryptfs, the value of the symlink in the lower filesystem is encrypted and stored as a Tag 70 packet. This results in a longer symlink target than if the target value wasn't encrypted. Users were reporting these messages in their syslog: [ 45.653441] ecryptfs_parse_tag_70_packet: max_packet_size is [56]; real packet size is [51] [ 45.653444] ecryptfs_decode_and_decrypt_filename: Could not parse tag 70 packet from filename; copying through filename as-is This was due to bufsiz, one the arguments in readlink(), being used to when allocating the buffer passed to the lower inode's readlink(). That symlink target may be very large, but when decoded and decrypted, could end up being smaller than bufsize. To fix this, the buffer passed to the lower inode's readlink() will always be PATH_MAX in size when filename encryption is enabled. Any necessary truncation occurs after the decoding and decrypting. Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index d832526..93bc0f8 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -640,8 +640,9 @@ static int ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) { char *lower_buf; + size_t lower_bufsiz; struct dentry *lower_dentry; - struct ecryptfs_crypt_stat *crypt_stat; + struct ecryptfs_mount_crypt_stat *mount_crypt_stat; char *plaintext_name; size_t plaintext_name_size; mm_segment_t old_fs; @@ -652,12 +653,21 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) rc = -EINVAL; goto out; } - crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat; + mount_crypt_stat = &ecryptfs_superblock_to_private( + dentry->d_sb)->mount_crypt_stat; + /* + * If the lower filename is encrypted, it will result in a significantly + * longer name. If needed, truncate the name after decode and decrypt. + */ + if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES) + lower_bufsiz = PATH_MAX; + else + lower_bufsiz = bufsiz; /* Released in this function */ - lower_buf = kmalloc(bufsiz, GFP_KERNEL); + lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL); if (lower_buf == NULL) { printk(KERN_ERR "%s: Out of memory whilst attempting to " - "kmalloc [%d] bytes\n", __func__, bufsiz); + "kmalloc [%d] bytes\n", __func__, lower_bufsiz); rc = -ENOMEM; goto out; } @@ -665,7 +675,7 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) set_fs(get_ds()); rc = lower_dentry->d_inode->i_op->readlink(lower_dentry, (char __user *)lower_buf, - bufsiz); + lower_bufsiz); set_fs(old_fs); if (rc >= 0) { rc = ecryptfs_decode_and_decrypt_filename(&plaintext_name, @@ -678,7 +688,9 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) rc); goto out_free_lower_buf; } - rc = copy_to_user(buf, plaintext_name, plaintext_name_size); + /* Check for bufsiz <= 0 done in sys_readlinkat() */ + rc = copy_to_user(buf, plaintext_name, + min((unsigned) bufsiz, plaintext_name_size)); if (rc) rc = -EFAULT; else -- cgit v0.10.2 From b10ceb5530df7ee6e81f92910589a34dd3e5690b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 20 Apr 2009 18:35:40 -0700 Subject: x86/PCI: don't bother with root quirks if _CRS is used It will be overwriten later if _CRS is used, so don't bother to set it. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index e121ee0..f893d6a 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -100,6 +100,10 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) int j; struct pci_root_info *info; + /* don't go for it if _CRS is used */ + if (pci_probe & PCI_USE__CRS) + return; + /* if only one root bus, don't need to anything */ if (pci_root_num < 2) return; -- cgit v0.10.2 From 1b6b8ce2ac372ea1f2065b89228ede105eb68dc5 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Thu, 9 Apr 2009 14:57:39 +0800 Subject: PCI: only save/restore existent registers in the PCIe capability PCIe 1.1 base neither requires the endpoint to implement the entire PCIe capability structure nor specifies default values of registers that are not implemented by the device. So we only save and restore registers that must be implemented by different device types if the device PCIe capability version is 1. PCIe 1.1 Capability Structure Expansion ECN and PCIe 2.0 requires all registers in the PCIe capability to be either implemented or hardwired to 0. Their PCIe capability version is 2. Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 16fd0d4..34bf0fd 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -681,11 +681,34 @@ EXPORT_SYMBOL(pci_choose_state); #define PCI_EXP_SAVE_REGS 7 +#define pcie_cap_has_devctl(type, flags) 1 +#define pcie_cap_has_lnkctl(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \ + (type == PCI_EXP_TYPE_ROOT_PORT || \ + type == PCI_EXP_TYPE_ENDPOINT || \ + type == PCI_EXP_TYPE_LEG_END)) +#define pcie_cap_has_sltctl(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \ + ((type == PCI_EXP_TYPE_ROOT_PORT) || \ + (type == PCI_EXP_TYPE_DOWNSTREAM && \ + (flags & PCI_EXP_FLAGS_SLOT)))) +#define pcie_cap_has_rtctl(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \ + (type == PCI_EXP_TYPE_ROOT_PORT || \ + type == PCI_EXP_TYPE_RC_EC)) +#define pcie_cap_has_devctl2(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1) +#define pcie_cap_has_lnkctl2(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1) +#define pcie_cap_has_sltctl2(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1) + static int pci_save_pcie_state(struct pci_dev *dev) { int pos, i = 0; struct pci_cap_saved_state *save_state; u16 *cap; + u16 flags; pos = pci_find_capability(dev, PCI_CAP_ID_EXP); if (pos <= 0) @@ -698,13 +721,22 @@ static int pci_save_pcie_state(struct pci_dev *dev) } cap = (u16 *)&save_state->data[0]; - pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]); - pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]); - pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]); - pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]); - pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]); - pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]); - pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]); + pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags); + + if (pcie_cap_has_devctl(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]); + if (pcie_cap_has_lnkctl(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]); + if (pcie_cap_has_sltctl(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]); + if (pcie_cap_has_rtctl(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]); + if (pcie_cap_has_devctl2(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]); + if (pcie_cap_has_lnkctl2(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]); + if (pcie_cap_has_sltctl2(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]); return 0; } @@ -714,6 +746,7 @@ static void pci_restore_pcie_state(struct pci_dev *dev) int i = 0, pos; struct pci_cap_saved_state *save_state; u16 *cap; + u16 flags; save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP); pos = pci_find_capability(dev, PCI_CAP_ID_EXP); @@ -721,13 +754,22 @@ static void pci_restore_pcie_state(struct pci_dev *dev) return; cap = (u16 *)&save_state->data[0]; - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]); - pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]); - pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]); - pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]); - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]); - pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]); - pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]); + pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags); + + if (pcie_cap_has_devctl(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]); + if (pcie_cap_has_lnkctl(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]); + if (pcie_cap_has_sltctl(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]); + if (pcie_cap_has_rtctl(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]); + if (pcie_cap_has_devctl2(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]); + if (pcie_cap_has_lnkctl2(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]); + if (pcie_cap_has_sltctl2(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]); } diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index e4d08c1..616bf8b 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -376,6 +376,7 @@ #define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ #define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ #define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ +#define PCI_EXP_TYPE_RC_EC 0x10 /* Root Complex Event Collector */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ #define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ #define PCI_EXP_DEVCAP 4 /* Device capabilities */ -- cgit v0.10.2 From a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 21 Apr 2009 00:50:11 -0400 Subject: ACPI: idle: mark_tsc_unstable() at init-time, not run-time The c2 and c3 idle handlers check tsc_halts_in_c() after every time they return from idle. Um, when?:-) Move this check to init-time to remove the unnecessary run-time overhead, and also to have the check complete before the first entry into the idle handler. ff69f2bba67bd45514923aaedbf40fe351787c59 (acpi: fix of pmtimer overflow that make Cx states time incorrect) replaced the hard-coded use of the PM-timer inside idle, with ktime_get_readl(), which possibly uses the TSC -- so it is now especially prudent to detect a broken TSC before entering idle. http://bugzilla.kernel.org/show_bug.cgi?id=13087 Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6fe1214..9d1f01e 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -581,6 +581,11 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { struct acpi_processor_cx *cx = &pr->power.states[i]; +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) + /* TSC could halt in idle, so notify users */ + if (tsc_halts_in_c(cx->type)) + mark_tsc_unstable("TSC halts in idle");; +#endif switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; @@ -871,11 +876,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, kt2 = ktime_get_real(); idle_time = ktime_to_us(ktime_sub(kt2, kt1)); -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC could halt in idle, so notify users */ - if (tsc_halts_in_c(cx->type)) - mark_tsc_unstable("TSC halts in idle");; -#endif sleep_ticks = us_to_pm_timer_ticks(idle_time); /* Tell the scheduler how much we idled: */ @@ -989,11 +989,6 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, spin_unlock(&c3_lock); } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC could halt in idle, so notify users */ - if (tsc_halts_in_c(ACPI_STATE_C3)) - mark_tsc_unstable("TSC halts in idle"); -#endif sleep_ticks = us_to_pm_timer_ticks(idle_time); /* Tell the scheduler how much we idled: */ sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); -- cgit v0.10.2 From 64f68416e794d59a42ddffdf1c5b7f026a4f23d5 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 23 Apr 2009 09:23:32 +1000 Subject: m68knommu: update the default config for the ColdFire 5407C3 board Signed-off-by: Greg Ungerer diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig index 1118936..97b6cde 100644 --- a/arch/m68knommu/configs/m5407c3_defconfig +++ b/arch/m68knommu/configs/m5407c3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 -# Wed May 7 10:25:16 2008 +# Linux kernel version: 2.6.30-rc2 +# Thu Apr 23 09:21:40 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -16,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -45,44 +55,43 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -96,7 +105,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -149,45 +158,36 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_COMEMPCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -228,6 +228,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -237,7 +238,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -248,14 +251,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -274,6 +271,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -335,6 +333,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -349,6 +352,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -362,7 +366,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -372,10 +376,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -385,8 +394,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -409,39 +420,22 @@ CONFIG_SLHC=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -454,7 +448,6 @@ CONFIG_INPUT=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -473,19 +466,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -496,6 +493,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -514,19 +512,17 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -534,12 +530,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -548,6 +546,11 @@ CONFIG_EXT2_FS=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -569,10 +572,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -582,13 +582,20 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -611,11 +618,17 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -624,18 +637,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From 92614610774072ea68131f16e024ee8fc15be9be Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 22 Apr 2009 19:28:15 -0400 Subject: ACPI: delete obsolete "bus master activity" proc field Linux-2.6.29 deleted the legacy ACPI idle handler, leaving the CPU_IDLE handler, which does not track bus master activity. So delete the unused bm_activity field -- it is confusing to print an always zero value. This patch could break programs that parse /proc/acpi/processor/*/power, since it deletes this line from that file: bus master activity: 00000000 http://bugzilla.kernel.org/show_bug.cgi?id=13145 is not fixed by this patch, but provoked this patch. Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 9d1f01e..eed3b45 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -662,11 +662,9 @@ static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset) seq_printf(seq, "active state: C%zd\n" "max_cstate: C%d\n" - "bus master activity: %08x\n" "maximum allowed latency: %d usec\n", pr->power.state ? pr->power.state - pr->power.states : 0, - max_cstate, (unsigned)pr->power.bm_activity, - pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)); + max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)); seq_puts(seq, "states:\n"); diff --git a/include/acpi/processor.h b/include/acpi/processor.h index b09c4fd..4927c06 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -84,7 +84,6 @@ struct acpi_processor_power { struct acpi_processor_cx *state; unsigned long bm_check_timestamp; u32 default_state; - u32 bm_activity; int count; struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER]; int timer_broadcast_on_state; -- cgit v0.10.2 From e84a26ce178345498a7eca0590852bcc36f1092f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 22 Apr 2009 20:52:25 -0400 Subject: ext4: Make the extent validity check more paranoid Instead of just checking that the extent block number is greater or equal than s_first_data_block, make sure it it is not pointing into the block group descriptors, since that is clearly wrong. This helps prevent filesystem from getting very badly corrupted in case an extent block is corrupted. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 6132353..c28ffe2 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -326,11 +326,14 @@ ext4_ext_max_entries(struct inode *inode, int depth) static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext) { - ext4_fsblk_t block = ext_pblock(ext); + ext4_fsblk_t block = ext_pblock(ext), valid_block; int len = ext4_ext_get_actual_len(ext); struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es; - if (unlikely(block < le32_to_cpu(es->s_first_data_block) || - ((block + len) > ext4_blocks_count(es)))) + + valid_block = le32_to_cpu(es->s_first_data_block) + + EXT4_SB(inode->i_sb)->s_gdb_count; + if (unlikely(block <= valid_block || + ((block + len) > ext4_blocks_count(es)))) return 0; else return 1; @@ -339,10 +342,13 @@ static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext) static int ext4_valid_extent_idx(struct inode *inode, struct ext4_extent_idx *ext_idx) { - ext4_fsblk_t block = idx_pblock(ext_idx); + ext4_fsblk_t block = idx_pblock(ext_idx), valid_block; struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es; - if (unlikely(block < le32_to_cpu(es->s_first_data_block) || - (block >= ext4_blocks_count(es)))) + + valid_block = le32_to_cpu(es->s_first_data_block) + + EXT4_SB(inode->i_sb)->s_gdb_count; + if (unlikely(block <= valid_block || + (block >= ext4_blocks_count(es)))) return 0; else return 1; -- cgit v0.10.2 From b5451f7b2694b04d9f912f6cf09db1729f291996 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 22 Apr 2009 21:00:36 -0400 Subject: ext4: Fix potential inode allocation soft lockup in Orlov allocator If the Orlov allocator is having trouble finding an appropriate block group, the fallback code could loop forever, causing a soft lockup warning in find_group_orlov(): BUG: soft lockup - CPU#0 stuck for 61s! [cp:11728] ... Pid: 11728, comm: cp Not tainted (2.6.30-rc1-dirty #77) Lenovo EIP: 0060:[] EFLAGS: 00000246 CPU: 0 EIP is at ext4_get_group_desc+0x54/0x9d ... Call Trace: [] find_group_orlov+0x2ee/0x334 [] ? sched_clock+0x8/0xb [] ext4_new_inode+0x2cf/0xb1a Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index cbce5aa..f18e0a0 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -585,6 +585,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent, fallback: ngroups = sbi->s_groups_count; avefreei = freei / ngroups; +fallback_retry: parent_group = EXT4_I(parent)->i_block_group; for (i = 0; i < ngroups; i++) { grp = (parent_group + i) % ngroups; @@ -602,7 +603,7 @@ fallback: * filesystems the above test can fail to find any blockgroups */ avefreei = 0; - goto fallback; + goto fallback_retry; } return -1; -- cgit v0.10.2 From c8088112fd96ad8b0f0bcd2f168fe6a17bf3cb41 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 22 Apr 2009 19:48:53 -0600 Subject: OMAP2xxx clock: pre-initialize struct clks early Commit 3f0a820c4c0b4670fb5f164baa5582e23c2ef118 breaks OMAP2xxx boot during initial propagate_rate() on osc_ck and sys_ck. Fix by pre-initializing all struct clks before running any other clock init code. Incorporates review comments from Russell King . Resolves <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000 <1>pgd = c0004000 <1>[00000000] *pgd=00000000 Internal error: Oops: 5 [#1] Modules linked in: CPU: 0 Not tainted (2.6.29-omap1 #37) PC is at propagate_rate+0x10/0x60 LR is at omap2_clk_init+0x30/0x218 ... Signed-off-by: Paul Walmsley Tested-by: Jarkko Nikula Cc: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 1e839c5..984fb86 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -720,14 +720,14 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_init_one(c->lk.clk); + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); - cpu_mask = 0; if (cpu_is_omap2420()) cpu_mask |= CK_242X; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 2e06145..29efc27 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -239,6 +239,13 @@ void recalculate_root_clocks(void) } } +/** + * clk_init_one - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ void clk_init_one(struct clk *clk) { INIT_LIST_HEAD(&clk->children); -- cgit v0.10.2 From a1992db55d80297544a65160ddb98afba45f7759 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 23 Apr 2009 08:22:23 +0200 Subject: ASoC: remove non-existing referece to CONFIG_SND_SOC_CODEC_WM8991 Signed-off-by: Takashi Iwai diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 030d245..f265380 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -56,7 +56,6 @@ obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o -obj-$(CONFIG_SND_SOC_WM8991) += snd-soc-wm8991.o obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o -- cgit v0.10.2 From 7315613f87f4aa0a52f60814f4ee3802e0bb1ec5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 23 Apr 2009 08:24:48 +0200 Subject: ALSA: hda - Fix init verbs of AD1884A mobile model The current ad1884a-mobile model has a problem that the speaker output doesn't work sometimes after boot or power-saving on some HP laptops. It seems that the verbs accessing to the non-functional widgets cause this problem. This patch simplifies the init verbs for mobile model not to touch unnecessary setups so that it avoids the speaker-mute problem. Reference: Novell bnc#495668 https://bugzilla.novell.com/show_bug.cgi?id=495668 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 9bcd8ab..84cc49c 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3817,6 +3817,49 @@ static struct hda_verb ad1884a_laptop_verbs[] = { { } /* end */ }; +static struct hda_verb ad1884a_mobile_verbs[] = { + /* DACs; unmute as default */ + {0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */ + /* Port-A (HP) mixer - route only from analog mixer */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + /* Port-A pin */ + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Port-A (HP) pin - always unmuted */ + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Port-B (mic jack) pin */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */ + /* Port-C (int mic) pin */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */ + /* Port-F (int speaker) mixer - route only from analog mixer */ + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + /* Port-F pin */ + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Analog mixer; mute as default */ + {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, + /* Analog Mix output amp */ + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* capture sources */ + /* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */ + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x0d, AC_VERB_SET_CONNECT_SEL, 0x0}, + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* unsolicited event for pin-sense */ + {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT}, + {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT}, + { } /* end */ +}; + /* * Thinkpad X300 * 0x11 - HP @@ -3988,7 +4031,7 @@ static int patch_ad1884a(struct hda_codec *codec) break; case AD1884A_MOBILE: spec->mixers[0] = ad1884a_mobile_mixers; - spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs; + spec->init_verbs[0] = ad1884a_mobile_verbs; spec->multiout.dig_out_nid = 0; codec->patch_ops.unsol_event = ad1884a_hp_unsol_event; codec->patch_ops.init = ad1884a_hp_init; -- cgit v0.10.2 From b48ccb095a0c9257241261ec2bd1cbb1bdabc48b Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 23 Apr 2009 09:36:52 +0200 Subject: locking: clarify kernel-taint warning message Andi Kleen reported this message triggering on non-lockdep kernels: Disabling lockdep due to kernel taint Clarify the message to say 'lock debugging' - debug_locks_off() turns off all things lock debugging, not just lockdep. [ Impact: change kernel warning message text ] Reported-by: Andi Kleen Cc: Peter Zijlstra Cc: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/kernel/panic.c b/kernel/panic.c index 934fb37..3dcaa16 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -221,7 +221,7 @@ void add_taint(unsigned flag) * post-warning case. */ if (flag != TAINT_CRAP && flag != TAINT_WARN && __debug_locks_off()) - printk(KERN_WARNING "Disabling lockdep due to kernel taint\n"); + printk(KERN_WARNING "Disabling lock debugging due to kernel taint\n"); set_bit(flag, &tainted_mask); } -- cgit v0.10.2 From 4c31e92b97b6d7e7b19ee5e54a22571ffdebb305 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 22 Apr 2009 14:19:27 -0700 Subject: x86: check boundary in setup_node_bootmem() Commit dc09855 ("x86/uv: fix init of memory-less nodes") causes a two sockets system (where node-1 doesn't have RAM installed) to crash. That commit makes node_possible include cpu nodes that do not have memory. So check boundary in setup_node_bootmem(). [ Impact: fix boot crash on RAM-less NUMA node system ] Signed-off-by: Yinghai Lu Cc: Jack Steiner LKML-Reference: <49EF89DF.9090404@kernel.org> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index d73aaa8..2d05a12 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -188,6 +188,9 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE); int nid; + if (!end) + return; + start = roundup(start, ZONE_ALIGN); printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid, -- cgit v0.10.2 From 952043ac12a117d8e94bddd9088338d7ad20ca7d Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 23 Apr 2009 08:48:15 +0100 Subject: bitops: Add __ffs64 bitop Finds the first set bit in a 64 bit word. This is required in order to fix a bug in GFS2, but I think it should be a generic function in case of future users. Signed-off-by: Steven Whitehouse Reviewed-by: Christoph Lameter Reviewed-by: Willy Tarreau diff --git a/include/linux/bitops.h b/include/linux/bitops.h index 6182913..c05a29c 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -112,6 +112,25 @@ static inline unsigned fls_long(unsigned long l) return fls64(l); } +/** + * __ffs64 - find first set bit in a 64 bit word + * @word: The 64 bit word + * + * On 64 bit arches this is a synomyn for __ffs + * The result is not defined if no bits are set, so check that @word + * is non-zero before calling this. + */ +static inline unsigned long __ffs64(u64 word) +{ +#if BITS_PER_LONG == 32 + if (((u32)word) == 0UL) + return __ffs((u32)(word >> 32)) + 32; +#elif BITS_PER_LONG != 64 +#error BITS_PER_LONG not 32 or 64 +#endif + return __ffs((unsigned long)word); +} + #ifdef __KERNEL__ #ifdef CONFIG_GENERIC_FIND_FIRST_BIT -- cgit v0.10.2 From d8bd504ab800c8e9aadb983914a33e7166320bec Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 23 Apr 2009 08:54:02 +0100 Subject: GFS2: Fix bug in block allocation The new bitfit algorithm was counting from the wrong end of 64 bit words in the bitfield. This fixes it by using __ffs64 instead of fls64 Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index f03d024..c9786a4 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -212,8 +212,7 @@ static u32 gfs2_bitfit(const u8 *buf, const unsigned int len, if (tmp == 0) return BFITNOENT; ptr--; - bit = fls64(tmp); - bit--; /* fls64 always adds one to the bit count */ + bit = __ffs64(tmp); bit /= 2; /* two bits per entry in the bitmap */ return (((const unsigned char *)ptr - buf) * GFS2_NBBY) + bit; } -- cgit v0.10.2 From d9ba7615bfd8bb06f79c853f9dfff9e93a837941 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 23 Apr 2009 08:59:41 +0100 Subject: GFS2: Ensure that the inode goal block settings are updated GFS2 has a goal block associated with each inode indicating the search start position for future block allocations (in fact there are two, but thats for backward compatibility with GFS1 as they are set to identical locations in GFS2). In some circumstances, depending on the ordering of updates to the inode it was possible for the goal block settings to not be updated on disk. This patch ensures that the goal block will always get updated, thus reducing the potential for searching the same (already allocated) blocks again when looking for free space during block allocation. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index c9786a4..5650382 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -1444,10 +1444,12 @@ static struct gfs2_rgrpd *rgblk_free(struct gfs2_sbd *sdp, u64 bstart, u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n) { struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode); + struct buffer_head *dibh; struct gfs2_alloc *al = ip->i_alloc; struct gfs2_rgrpd *rgd = al->al_rgd; u32 goal, blk; u64 block; + int error; if (rgrp_contains_block(rgd, ip->i_goal)) goal = ip->i_goal - rgd->rd_data0; @@ -1460,7 +1462,13 @@ u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n) rgd->rd_last_alloc = blk; block = rgd->rd_data0 + blk; ip->i_goal = block; - + error = gfs2_meta_inode_buffer(ip, &dibh); + if (error == 0) { + struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data; + gfs2_trans_add_bh(ip->i_gl, dibh, 1); + di->di_goal_meta = di->di_goal_data = cpu_to_be64(ip->i_goal); + brelse(dibh); + } gfs2_assert_withdraw(sdp, rgd->rd_free >= *n); rgd->rd_free -= *n; -- cgit v0.10.2 From 3bd5f3ef290627efa3c219fa21a82eea90bc4cb0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 23 Apr 2009 13:58:06 +0200 Subject: [S390] ipl: fix compile breakage Fix this for !CONFIG_SMP: arch/s390/kernel/ipl.c: In function 'stop_run': arch/s390/kernel/ipl.c:1461: error: implicit declaration of function 'signal_processor' Reported-by: Sachin Sant Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 6f3711a..b8bf4b1 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #define IPL_PARM_BLOCK_VERSION 0 -- cgit v0.10.2 From b1ad171efa089ae26aba750d747d8149a4f860d5 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 23 Apr 2009 13:58:07 +0200 Subject: [S390] appldata: avoid deadlock with appldata_mem The appldata_ops callbacks are called with a spin_lock held. But the appldata_mem callback then calls all_vm_events(), which calls get_online_cpus(), which might sleep. This possible deadlock is fixed by using a mutex instead of a spin_lock. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index aeb3cff..1dfc710 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -98,7 +98,7 @@ static DECLARE_WORK(appldata_work, appldata_work_fn); /* * Ops list */ -static DEFINE_SPINLOCK(appldata_ops_lock); +static DEFINE_MUTEX(appldata_ops_mutex); static LIST_HEAD(appldata_ops_list); @@ -129,14 +129,14 @@ static void appldata_work_fn(struct work_struct *work) i = 0; get_online_cpus(); - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { ops = list_entry(lh, struct appldata_ops, list); if (ops->active == 1) { ops->callback(ops->data); } } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); put_online_cpus(); } @@ -338,7 +338,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, struct list_head *lh; found = 0; - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); if (&tmp_ops->ctl_table[2] == ctl) { @@ -346,15 +346,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } } if (!found) { - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); return -ENODEV; } ops = ctl->data; if (!try_module_get(ops->owner)) { // protect this function - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); return -ENODEV; } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); if (!*lenp || *ppos) { *lenp = 0; @@ -378,11 +378,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, return -EFAULT; } - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); if ((buf[0] == '1') && (ops->active == 0)) { // protect work queue callback if (!try_module_get(ops->owner)) { - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); module_put(ops->owner); return -ENODEV; } @@ -407,7 +407,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, "failed with rc=%d\n", ops->name, rc); module_put(ops->owner); } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); out: *lenp = len; *ppos += len; @@ -433,9 +433,9 @@ int appldata_register_ops(struct appldata_ops *ops) if (!ops->ctl_table) return -ENOMEM; - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_add(&ops->list, &appldata_ops_list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); ops->ctl_table[0].procname = appldata_proc_name; ops->ctl_table[0].maxlen = 0; @@ -452,9 +452,9 @@ int appldata_register_ops(struct appldata_ops *ops) goto out; return 0; out: - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_del(&ops->list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); kfree(ops->ctl_table); return -ENOMEM; } @@ -466,9 +466,9 @@ out: */ void appldata_unregister_ops(struct appldata_ops *ops) { - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_del(&ops->list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); unregister_sysctl_table(ops->sysctl_header); kfree(ops->ctl_table); } diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index 3ed56b7..4188cbe 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -78,7 +78,7 @@ static void appldata_get_mem_data(void *data) { /* * don't put large structures on the stack, we are - * serialized through the appldata_ops_lock and can use static + * serialized through the appldata_ops_mutex and can use static */ static struct sysinfo val; unsigned long ev[NR_VM_EVENT_ITEMS]; -- cgit v0.10.2 From e1c805309d19c69d4ebeac38724076fa86feacdf Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 23 Apr 2009 13:58:08 +0200 Subject: [S390] /proc/stat idle field for idle cpus The cpu idle field in the output of /proc/stat is too small for cpus that have been idle for more than a tick. Add the architecture hook arch_idle_time that allows to add the not accounted idle time of a sleeping cpu without waking the cpu. The s390 implementation of arch_idle_time uses the already existing s390_idle_data per_cpu variable to find the sleep time of a neighboring idle cpu. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index 95b0f7d..941384f 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -174,4 +174,8 @@ cputime64_to_clock_t(cputime64_t cputime) return __div(cputime, 4096000000ULL / USER_HZ); } +cputime64_t s390_get_idle_time(int cpu); + +#define arch_idle_time(cpu) s390_get_idle_time(cpu) + #endif /* _S390_CPUTIME_H */ diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 38ea92f..c87f59b 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -240,6 +240,22 @@ void vtime_stop_cpu(void) } } +cputime64_t s390_get_idle_time(int cpu) +{ + struct s390_idle_data *idle; + unsigned long long now, idle_time, idle_enter; + + idle = &per_cpu(s390_idle, cpu); + spin_lock(&idle->lock); + now = get_clock(); + idle_time = 0; + idle_enter = idle->idle_enter; + if (idle_enter != 0ULL && idle_enter < now) + idle_time = now - idle_enter; + spin_unlock(&idle->lock); + return idle_time; +} + /* * Sorted add to a list. List is linear searched until first bigger * element is found. diff --git a/fs/proc/stat.c b/fs/proc/stat.c index f75efa2..81e4eb6 100644 --- a/fs/proc/stat.c +++ b/fs/proc/stat.c @@ -18,6 +18,9 @@ #ifndef arch_irq_stat #define arch_irq_stat() 0 #endif +#ifndef arch_idle_time +#define arch_idle_time(cpu) 0 +#endif static int show_stat(struct seq_file *p, void *v) { @@ -40,6 +43,7 @@ static int show_stat(struct seq_file *p, void *v) nice = cputime64_add(nice, kstat_cpu(i).cpustat.nice); system = cputime64_add(system, kstat_cpu(i).cpustat.system); idle = cputime64_add(idle, kstat_cpu(i).cpustat.idle); + idle = cputime64_add(idle, arch_idle_time(i)); iowait = cputime64_add(iowait, kstat_cpu(i).cpustat.iowait); irq = cputime64_add(irq, kstat_cpu(i).cpustat.irq); softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq); @@ -69,6 +73,7 @@ static int show_stat(struct seq_file *p, void *v) nice = kstat_cpu(i).cpustat.nice; system = kstat_cpu(i).cpustat.system; idle = kstat_cpu(i).cpustat.idle; + idle = cputime64_add(idle, arch_idle_time(i)); iowait = kstat_cpu(i).cpustat.iowait; irq = kstat_cpu(i).cpustat.irq; softirq = kstat_cpu(i).cpustat.softirq; -- cgit v0.10.2 From 4d7a3cdfb4c9aa1e2ce61f3b16b24eb6acf6726d Mon Sep 17 00:00:00 2001 From: Frank Munzert Date: Thu, 23 Apr 2009 13:58:09 +0200 Subject: [S390] Use tape_generic_offline directly. tape_3590_offline and tape_34xx_offline are removed and tape_generic_offline is called directly instead. Signed-off-by: Frank Munzert Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h index c07809c..5469e09 100644 --- a/drivers/s390/char/tape.h +++ b/drivers/s390/char/tape.h @@ -285,7 +285,7 @@ extern int tape_mtop(struct tape_device *, int, int); extern void tape_state_set(struct tape_device *, enum tape_state); extern int tape_generic_online(struct tape_device *, struct tape_discipline *); -extern int tape_generic_offline(struct tape_device *device); +extern int tape_generic_offline(struct ccw_device *); /* Externals from tape_devmap.c */ extern int tape_generic_probe(struct ccw_device *); diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c index 807ded5..5f8e8ef 100644 --- a/drivers/s390/char/tape_34xx.c +++ b/drivers/s390/char/tape_34xx.c @@ -1294,12 +1294,6 @@ tape_34xx_online(struct ccw_device *cdev) ); } -static int -tape_34xx_offline(struct ccw_device *cdev) -{ - return tape_generic_offline(cdev->dev.driver_data); -} - static struct ccw_driver tape_34xx_driver = { .name = "tape_34xx", .owner = THIS_MODULE, @@ -1307,7 +1301,7 @@ static struct ccw_driver tape_34xx_driver = { .probe = tape_generic_probe, .remove = tape_generic_remove, .set_online = tape_34xx_online, - .set_offline = tape_34xx_offline, + .set_offline = tape_generic_offline, }; static int diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index fc1d912..823b05b 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -1707,19 +1707,13 @@ tape_3590_online(struct ccw_device *cdev) &tape_discipline_3590); } -static int -tape_3590_offline(struct ccw_device *cdev) -{ - return tape_generic_offline(cdev->dev.driver_data); -} - static struct ccw_driver tape_3590_driver = { .name = "tape_3590", .owner = THIS_MODULE, .ids = tape_3590_ids, .probe = tape_generic_probe, .remove = tape_generic_remove, - .set_offline = tape_3590_offline, + .set_offline = tape_generic_offline, .set_online = tape_3590_online, }; diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index 08c09d3..8a109f3 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -387,8 +387,11 @@ tape_cleanup_device(struct tape_device *device) * Manual offline is only allowed while the drive is not in use. */ int -tape_generic_offline(struct tape_device *device) +tape_generic_offline(struct ccw_device *cdev) { + struct tape_device *device; + + device = cdev->dev.driver_data; if (!device) { return -ENODEV; } -- cgit v0.10.2 From 75ee034addc9ac3f6a38a9e6b30e9b54be15d4e5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 23 Apr 2009 13:58:10 +0200 Subject: [S390] omit frame pointers on s390 when possible Always omit frame pointers on s390. They aren't too useful for the kernel since we have already the kernel stack backchain which allows us to walk the kernel stack. So eleminate the extra code for frame pointers. Only allow the extra code for the function tracer since the gcc compile options -pg and -fomit-frame-pointer are incompatible. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index c6e854f..812c282 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -440,7 +440,7 @@ config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select STACKTRACE - select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND + select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND && !S390 select KALLSYMS select KALLSYMS_ALL @@ -620,7 +620,7 @@ config ARCH_WANT_FRAME_POINTERS config FRAME_POINTER bool "Compile the kernel with frame pointers" depends on DEBUG_KERNEL && \ - (CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \ + (CRIS || M68K || M68KNOMMU || FRV || UML || \ AVR32 || SUPERH || BLACKFIN || MN10300) || \ ARCH_WANT_FRAME_POINTERS default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS @@ -809,13 +809,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT depends on !X86_64 select STACKTRACE - select FRAME_POINTER if !PPC + select FRAME_POINTER if !PPC && !S390 help Provide stacktrace filter for fault-injection capabilities config LATENCYTOP bool "Latency measuring infrastructure" - select FRAME_POINTER if !MIPS && !PPC + select FRAME_POINTER if !MIPS && !PPC && !S390 select KALLSYMS select KALLSYMS_ALL select STACKTRACE -- cgit v0.10.2 From e655dc8873b2390d92888095af6adad822a8b386 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 23 Apr 2009 13:58:11 +0200 Subject: [S390] update default configuration. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 31e809c..d401d56 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc4 -# Wed Feb 11 10:07:16 2009 +# Linux kernel version: 2.6.30-rc3 +# Thu Apr 23 09:29:52 2009 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_NO_DMA=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_PGSTE=y CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_S390=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -37,6 +38,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y @@ -77,21 +79,24 @@ CONFIG_IPC_NS=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -99,10 +104,12 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_HAVE_SYSCALL_WRAPPERS=y @@ -111,6 +118,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -124,7 +133,6 @@ CONFIG_MODVERSIONS=y CONFIG_INIT_ALL_POSSIBLE=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -211,11 +219,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # I/O subsystem configuration # -CONFIG_MACHCHK_WARNING=y CONFIG_QDIO=y CONFIG_CHSC_SCH=m @@ -247,12 +256,12 @@ CONFIG_S390_HYPFS_FS=y CONFIG_KEXEC=y # CONFIG_ZFCPDUMP is not set CONFIG_S390_GUEST=y +CONFIG_SECCOMP=y CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -374,6 +383,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -438,7 +448,6 @@ CONFIG_CAN_BCM=m CONFIG_CAN_VCAN=m # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -537,6 +546,7 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ZFCP=y CONFIG_SCSI_DH=m @@ -544,6 +554,10 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y @@ -564,6 +578,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m @@ -667,6 +682,7 @@ CONFIG_S390_VMUR=m # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set CONFIG_ACCESSIBILITY=y +# CONFIG_AUXDISPLAY is not set # CONFIG_STAGING is not set # @@ -676,6 +692,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -701,6 +718,11 @@ CONFIG_INOTIFY_USER=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -744,6 +766,8 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_EXOFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -758,7 +782,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -806,6 +829,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -830,7 +854,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -840,7 +863,9 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -850,14 +875,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set -# CONFIG_DEBUG_PAGEALLOC is not set # # Security options @@ -882,10 +910,12 @@ CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -954,6 +984,7 @@ CONFIG_CRYPTO_SEED=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -969,6 +1000,7 @@ CONFIG_CRYPTO_SHA512_S390=m # CONFIG_CRYPTO_DES_S390 is not set # CONFIG_CRYPTO_AES_S390 is not set CONFIG_S390_PRNG=m +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -982,9 +1014,14 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=m CONFIG_CRC7=m CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_NLATTR=y CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m -- cgit v0.10.2 From 323d23aeac4918c7a540b597a26fa7a67645593a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 23 Apr 2009 08:51:22 -0500 Subject: Revert "powerpc: Add support for early tlbilx opcode" This reverts commit e9965577406a2148ade97b5e0ce7c448b4ba4ef6. Our HW guys were able to fix this so it never sees the light of day. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 86d2366..cbf1543 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -52,12 +52,6 @@ */ #define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000) -/* This indicates that the processor uses the wrong opcode for tlbilx - * instructions. During the ISA 2.06 development the opcode for tlbilx - * changed and some early implementations used to old opcode - */ -#define MMU_FTR_TLBILX_EARLY_OPCODE ASM_CONST(0x00400000) - #ifndef __ASSEMBLY__ #include diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index ef4da37..640ccbb 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -44,7 +44,6 @@ #define PPC_INST_STSWI 0x7c0005aa #define PPC_INST_STSWX 0x7c00052a #define PPC_INST_TLBILX 0x7c000024 -#define PPC_INST_TLBILX_EARLY 0x7c000626 #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ @@ -64,18 +63,10 @@ #define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI) #define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI) #define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \ - __PPC_T_TLB(t) | \ - __PPC_RA(a) | __PPC_RB(b)) + __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b)) #define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b) #define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b) #define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b) - -#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \ - __PPC_T_TLB(t) | \ - __PPC_RA(a) | __PPC_RB(b)) -#define PPC_TLBILX_ALL_EARLY(a, b) PPC_TLBILX_EARLY(0, a, b) -#define PPC_TLBILX_PID_EARLY(a, b) PPC_TLBILX_EARLY(1, a, b) -#define PPC_TLBILX_VA_EARLY(a, b) PPC_TLBILX_EARLY(3, a, b) #define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \ __PPC_WC(w)) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 57db50f..cd1b687 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1766,7 +1766,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_features = CPU_FTRS_E500MC, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | - MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE, + MMU_FTR_USE_TLBILX, .icache_bsize = 64, .dcache_bsize = 64, .num_pmcs = 4, diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 45fed36..788b87c 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -138,11 +138,7 @@ BEGIN_MMU_FTR_SECTION andi. r3,r3,MMUCSR0_TLBFI@l bne 1b MMU_FTR_SECTION_ELSE - BEGIN_MMU_FTR_SECTION_NESTED(96) - PPC_TLBILX_ALL(0,r3) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_ALL_EARLY(0,r3) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) + PPC_TLBILX_ALL(0,0) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync @@ -155,11 +151,7 @@ BEGIN_MMU_FTR_SECTION wrteei 0 mfspr r4,SPRN_MAS6 /* save MAS6 */ mtspr SPRN_MAS6,r3 - BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_PID(0,0) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_PID_EARLY(0,0) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) mtspr SPRN_MAS6,r4 /* restore MAS6 */ wrtee r10 MMU_FTR_SECTION_ELSE @@ -193,11 +185,7 @@ BEGIN_MMU_FTR_SECTION mtspr SPRN_MAS1,r4 tlbwe MMU_FTR_SECTION_ELSE - BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_VA(0,r3) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_VA_EARLY(0,r3) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync -- cgit v0.10.2 From b62c31ae401c6df25c61b206681a6e904ef97169 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 23 Apr 2009 22:56:11 +1000 Subject: powerpc: fix for long standing bug noticed by gcc 4.4.0 Previous gcc versions didn't notice this because one of the preceding #ifs always evaluated to true. gcc 4.4.0 produced this error: arch/powerpc/mm/tlb_nohash_low.S:206:6: error: #elif with no expression Signed-off-by: Stephen Rothwell Acked-by: Josh Boyer Signed-off-by: Kumar Gala diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 788b87c..3037911 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -191,6 +191,6 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) isync 1: wrtee r10 blr -#elif +#else #error Unsupported processor type ! #endif -- cgit v0.10.2 From f2ec24fd42d52a52829070b5e31d9a17d145df30 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:36:54 +0200 Subject: microblaze: Remove unneded per cpu SYSCALL_SAVE variable Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h index 7f57e42..1019d88 100644 --- a/arch/microblaze/include/asm/entry.h +++ b/arch/microblaze/include/asm/entry.h @@ -29,7 +29,6 @@ DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */ DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ -DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */ # endif /* __ASSEMBLY__ */ #endif /* _ASM_MICROBLAZE_ENTRY_H */ -- cgit v0.10.2 From 51eb6dc9ca40d086c102bb868ba7f29f33a30f6f Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:41:45 +0200 Subject: microblaze: Remove while(1) loop from show_regs function I removed it because of show_regs can't break die function. If process/kernel failed, die (do_exit) function resolve it. Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 436f26c..bdc8b2c 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -37,8 +37,6 @@ void show_regs(struct pt_regs *regs) regs->r29, regs->r30, regs->r31, regs->pc); printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", regs->msr, regs->ear, regs->esr, regs->fsr); - while (1) - ; } void (*pm_idle)(void); -- cgit v0.10.2 From ceb8944b3a3dd3ec4094a476a44802cc32c4fc02 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:46:37 +0200 Subject: microblaze: Remove uncache shadow condition Uncached shadow feature is not supported in current kernel code that's why I removed it. Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h index c4c64b4..c209c47 100644 --- a/arch/microblaze/include/asm/cache.h +++ b/arch/microblaze/include/asm/cache.h @@ -37,9 +37,4 @@ void _invalidate_dcache(unsigned int addr); #define __disable_dcache() _disable_dcache() #define __invalidate_dcache(addr) _invalidate_dcache(addr) -/* FIXME - I don't think this is right */ -#ifdef CONFIG_XILINX_UNCACHED_SHADOW -#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE) -#endif - #endif /* _ASM_MICROBLAZE_CACHE_H */ -- cgit v0.10.2 From ac3efab50621bd6d01e5b40f3134dc7824788390 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:58:47 +0200 Subject: microblaze: Rename kernel_mode to pt_mode in pt_regs Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index d8e1543..4bed76d 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -62,7 +62,7 @@ static inline void start_thread(struct pt_regs *regs, { regs->pc = pc; regs->r1 = usp; - regs->kernel_mode = 0; + regs->pt_mode = 0; } /* Free all resources held by a thread. */ diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h index f1f0348..55015bc 100644 --- a/arch/microblaze/include/asm/ptrace.h +++ b/arch/microblaze/include/asm/ptrace.h @@ -52,10 +52,10 @@ struct pt_regs { microblaze_reg_t ear; microblaze_reg_t esr; microblaze_reg_t fsr; - int kernel_mode; + int pt_mode; }; -#define kernel_mode(regs) ((regs)->kernel_mode) +#define kernel_mode(regs) ((regs)->pt_mode) #define user_mode(regs) (!kernel_mode(regs)) #define instruction_pointer(regs) ((regs)->pc) diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c index 38e1a2e..aabd9e9 100644 --- a/arch/microblaze/kernel/asm-offsets.c +++ b/arch/microblaze/kernel/asm-offsets.c @@ -57,7 +57,7 @@ int main(int argc, char *argv[]) DEFINE(PT_R29, offsetof(struct pt_regs, r29)); DEFINE(PT_R30, offsetof(struct pt_regs, r30)); DEFINE(PT_R31, offsetof(struct pt_regs, r31)); - DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode)); + DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode)); BLANK(); /* Magic offsets for PTRACE PEEK/POKE etc */ diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index bdc8b2c..40cc148 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -18,7 +18,7 @@ void show_regs(struct pt_regs *regs) { - printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode); + printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode); printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", regs->r1, regs->r2, regs->r3, regs->r4); printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", @@ -169,7 +169,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.r6 = (unsigned long)arg; local_save_flags(regs.msr); regs.pc = (unsigned long)kernel_thread_helper; - regs.kernel_mode = 1; + regs.pt_mode = 1; ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); -- cgit v0.10.2 From 2eba318e0db1114726e69660d6b9e1bd59b10ba1 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:05:26 +0200 Subject: microblaze: Move task_pt_regs up This change is important for easier merge with Microblaze MMU code. Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 4bed76d..cea42a3 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -26,6 +26,9 @@ extern const struct seq_operations cpuinfo_op; # endif /* __ASSEMBLY__ */ +#define task_pt_regs(tsk) \ + (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) + /* * User space process size: memory size * @@ -84,9 +87,6 @@ extern unsigned long get_wchan(struct task_struct *p); */ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); -# define task_pt_regs(tsk) \ - (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) - # define KSTK_EIP(tsk) (0) # define KSTK_ESP(tsk) (0) -- cgit v0.10.2 From bf7e9da4e70a9d4bf9dc5829ff854398e0e4b7f7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:10:07 +0200 Subject: microblaze: Remove sparse error in traps.c CHECK arch/microblaze/kernel/traps.c arch/microblaze/kernel/traps.c:37:47: warning: Using plain integer as NULL pointer CC arch/microblaze/kernel/traps.o Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index fbdc533..293ef48 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -34,7 +34,7 @@ static int kstack_depth_to_print = 24; static int __init kstack_setup(char *s) { - kstack_depth_to_print = strict_strtoul(s, 0, 0); + kstack_depth_to_print = strict_strtoul(s, 0, NULL); return 1; } -- cgit v0.10.2 From ce0b755f7dda4f1c06b89f7e903667f538dadd3c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:11:22 +0200 Subject: microblaze: Add missing declaration for die and _exception func This change remove sparse errors. Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h index 4cdd215..24ca540 100644 --- a/arch/microblaze/include/asm/exceptions.h +++ b/arch/microblaze/include/asm/exceptions.h @@ -61,6 +61,9 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, int fsr, int addr); +void die(const char *str, struct pt_regs *fp, long err); +void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr); + #if defined(CONFIG_XMON) extern void xmon(struct pt_regs *regs); extern int xmon_bpt(struct pt_regs *regs); -- cgit v0.10.2 From df4f3eb7c318e34899e9499bc5c9295690f7a106 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:29:13 +0200 Subject: microblaze: Add missing preadv and pwritev syscalls Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index d9d3903..b5e2f5f 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -378,8 +378,10 @@ #define __NR_sendmsg 360 /* new */ #define __NR_recvmsg 361 /* new */ #define __NR_accept04 362 /* new */ +#define __NR_preadv 363 /* new */ +#define __NR_pwritev 364 /* new */ -#define __NR_syscalls 363 +#define __NR_syscalls 365 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 529b0db..3bb42ec 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -363,3 +363,5 @@ ENTRY(sys_call_table) .long sys_sendmsg /* 360 */ .long sys_recvmsg .long sys_ni_syscall + .long sys_ni_syscall + .long sys_ni_syscall -- cgit v0.10.2 From e1c4bd0897b6d03eff4b32197d6ab017f83fc836 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:30:16 +0200 Subject: microblaze: Move start_thread to process.c This change is due to upcomming MMU merge Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index cea42a3..89aa395 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -29,6 +29,9 @@ extern const struct seq_operations cpuinfo_op; #define task_pt_regs(tsk) \ (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) +/* Do necessary setup to start up a newly executed thread. */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp); + /* * User space process size: memory size * @@ -58,16 +61,6 @@ struct task_struct; struct thread_struct { }; # define INIT_THREAD { } -/* Do necessary setup to start up a newly executed thread. */ -static inline void start_thread(struct pt_regs *regs, - unsigned long pc, - unsigned long usp) -{ - regs->pc = pc; - regs->r1 = usp; - regs->pt_mode = 0; -} - /* Free all resources held by a thread. */ static inline void release_thread(struct task_struct *dead_task) { diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 40cc148..dd15de9 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -182,3 +182,12 @@ unsigned long get_wchan(struct task_struct *p) /* TBD (used by procfs) */ return 0; } + +/* Set up a thread for executing a new program */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) +{ + set_fs(USER_DS); + regs->pc = pc; + regs->r1 = usp; + regs->pt_mode = 0; +} -- cgit v0.10.2 From 6714fcc34e1bcf247fe542ebdea36b699ff8e2b8 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:32:21 +0200 Subject: microblaze: Remove redundant variable Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index dd15de9..07d4fa3 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -161,7 +161,6 @@ static void kernel_thread_helper(int (*fn)(void *), void *arg) int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) { struct pt_regs regs; - int ret; memset(®s, 0, sizeof(regs)); /* store them in non-volatile registers */ @@ -171,10 +170,8 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.pc = (unsigned long)kernel_thread_helper; regs.pt_mode = 1; - ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); - - return ret; } unsigned long get_wchan(struct task_struct *p) -- cgit v0.10.2 From 04e3a553e0cbed369e5649c472ac317b6c45215d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 20 Apr 2009 09:56:24 +0200 Subject: microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig Makefile contained different cpu config flag than is in Kconfig.auto in platform folder Signed-off-by: Michal Simek diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 0dcbb98..ee302f9 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -26,7 +26,7 @@ ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) endif CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift -CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare +CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) -- cgit v0.10.2 From 6e60c14810d8da792e418fdcb2110b4185d1b9a2 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 16 Apr 2009 22:49:17 +0200 Subject: microblaze: iowrite upon timeout retries reaches -1, so the iowrite occurrs upon timeout. Acked-by: John Williams Signed-off-by: Roel Kluin Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c index 62cc789..4b0f0fd 100644 --- a/arch/microblaze/kernel/early_printk.c +++ b/arch/microblaze/kernel/early_printk.c @@ -36,7 +36,7 @@ static void early_printk_putc(char c) unsigned retries = 10000; /* read status bit - 0x8 offset */ - while (retries-- && (in_be32(base_addr + 8) & (1 << 3))) + while (--retries && (in_be32(base_addr + 8) & (1 << 3))) ; /* Only attempt the iowrite if we didn't timeout */ -- cgit v0.10.2 From 79533fd4cb7c261694d3b7d5bdde78836bc35b49 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:04:39 +0200 Subject: microblaze: Fix USR1/2 pvr printing message Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c index 3b6212b..4dcfccd 100644 --- a/arch/microblaze/kernel/cpu/mb.c +++ b/arch/microblaze/kernel/cpu/mb.c @@ -115,8 +115,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) cpuinfo.hw_debug ? "yes" : "no"); count += seq_printf(m, - "PVR-USR1:\t%x\n" - "PVR-USR2:\t%x\n", + "PVR-USR1:\t%02x\n" + "PVR-USR2:\t%08x\n", cpuinfo.pvr_user1, cpuinfo.pvr_user2); -- cgit v0.10.2 From fbeda67782689bf80109512b16ac47264a282d01 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:06:08 +0200 Subject: microblaze: Do not use PVR configuration for broken MB version Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index cf7424a..153f57c 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -30,6 +30,13 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) int temp; /* for saving temp value */ get_pvr(&pvr); + CI(ver_code, VERSION); + if (!ci->ver_code) { + printk(KERN_ERR "ERROR: MB has broken PVR regs " + "-> use DTS setting\n"); + return; + } + temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\ PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr); if (ci->use_instr != temp) @@ -60,8 +67,6 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(mmu, USE_MMU); - CI(ver_code, VERSION); - CI(use_icache, USE_ICACHE); CI(icache_tagbits, ICACHE_ADDR_TAG_BITS); CI(icache_write, ICACHE_ALLOW_WR); diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 4a740df..a10bea1 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -71,7 +71,7 @@ void __init setup_cpuinfo(void) __func__); set_cpuinfo_static(&cpuinfo, cpu); break; -/* FIXME I found weird behavior with MB 7.00.a/b +/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a * please do not use FULL PVR with MMU */ case 1: printk(KERN_INFO "%s: Using full CPU PVR support\n", -- cgit v0.10.2 From 6dfb79aa114ac69032f3931235ffc90799e9630b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:07:00 +0200 Subject: microblaze: Do not check use_dcache It is not necessary to check cpuinfo.use_dcache because this checking is done in function which call that functions Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index be9fecc..af866a4 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -100,7 +100,6 @@ void _enable_dcache(void) void _disable_dcache(void) { - if (cpuinfo.use_dcache) { #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR __asm__ __volatile__ (" \ msrclr r0, %0; \ @@ -119,12 +118,10 @@ void _disable_dcache(void) : "i" (MSR_DCE) \ : "memory", "r12"); #endif - } } void _invalidate_dcache(unsigned int addr) { - if (cpuinfo.use_dcache) __asm__ __volatile__ (" \ wdc %0, r0" \ : \ -- cgit v0.10.2 From 2921e2bd679949a7892d308b414e6a3b3c705260 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:08:47 +0200 Subject: microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too For noMMU kernel this change nothing bring but this change helps with MMU synchronization. Signed-off-by: Michal Simek diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h index 1019d88..e4c3aef 100644 --- a/arch/microblaze/include/asm/entry.h +++ b/arch/microblaze/include/asm/entry.h @@ -31,4 +31,7 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ # endif /* __ASSEMBLY__ */ +/* noMMU hasn't any space for args */ +# define STATE_SAVE_ARG_SPACE (0) + #endif /* _ASM_MICROBLAZE_ENTRY_H */ diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 89aa395..9329029 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -15,6 +15,8 @@ #include #include #include +#include +#include # ifndef __ASSEMBLY__ /* from kernel/cpu/mb.c */ diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 3889cf4..40d3693 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -178,7 +178,9 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p) asmlinkage int sys_sigreturn(struct pt_regs *regs) { - struct sigframe *frame = (struct sigframe *)regs->r1; + struct sigframe *frame = + (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); + sigset_t set; int rval; @@ -209,7 +211,9 @@ badframe: asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) { - struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1; + struct rt_sigframe *frame = + (struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); + sigset_t set; stack_t st; int rval; @@ -336,7 +340,8 @@ static void setup_frame(int sig, struct k_sigaction *ka, goto give_sigsegv; /* Set up registers for signal handler */ - regs->r1 = (unsigned long) frame; + regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE; + /* Signal handler args: */ regs->r5 = signal; /* Arg 0: signum */ regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */ @@ -414,7 +419,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, goto give_sigsegv; /* Set up registers for signal handler */ - regs->r1 = (unsigned long) frame; + regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE; + /* Signal handler args: */ regs->r5 = signal; /* arg 0: signum */ regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */ -- cgit v0.10.2 From 993ce24078eac1442078741cd204584b63de0881 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:12:18 +0200 Subject: microblaze: Use CFLAGS_KERNEL instead of CFLAGS Signed-off-by: Michal Simek diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index ee302f9..aaadfa7 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -32,15 +32,13 @@ CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) # The various CONFIG_XILINX cpu features options are integers 0/1/2... # rather than bools y/n -CFLAGS += $(CPUFLAGS-1) -CFLAGS += $(CPUFLAGS-2) # r31 holds current when in kernel mode -CFLAGS += -ffixed-r31 +CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) LDFLAGS_BLOB := --format binary --oformat elf32-microblaze -LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) +LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name) head-y := arch/microblaze/kernel/head.o libs-y += arch/microblaze/lib/ $(LIBGCC) -- cgit v0.10.2 From f57f2fe2a39338c47b67fbd564a9d3b7587bcbee Mon Sep 17 00:00:00 2001 From: Coly Li Date: Thu, 23 Apr 2009 03:05:31 +0800 Subject: microblaze: add parameter to microblaze_read() This patch modifies parameter of microblaze_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li Cc: Michal Simek Cc: Ingo Molnar Signed-off-by: Michal Simek diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 05a497e..bdfa2f9 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -176,7 +176,7 @@ static __init void microblaze_clockevent_init(void) clockevents_register_device(&clockevent_microblaze_timer); } -static cycle_t microblaze_read(void) +static cycle_t microblaze_read(struct clocksource *cs) { /* reading actual value of timer 1 */ return (cycle_t) (in_be32(TIMER_BASE + TCR1)); -- cgit v0.10.2 From a396e32ef0f3b98700abb9a6da3530c945e55908 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 23 Apr 2009 15:43:45 +0100 Subject: ASoC: s3c-i2s-v2 needs to declare a license for modular builds It relies on EXPORT_SYMBOL_GPL() symbols. Signed-off-by: Mark Brown diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c index 689ffcd..ab680aa 100644 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -636,5 +636,6 @@ int s3c_i2sv2_register_dai(struct snd_soc_dai *dai) return snd_soc_register_dai(dai); } - EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai); + +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 9232fcc99948e39d5be04fc1c1025bd4f7998739 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 8 Apr 2009 14:49:38 -0700 Subject: davinci: add default Kconfig, add HAVE_IDE Signed-off-by: Kevin Hilman diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893..bb57f35 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -585,6 +585,7 @@ config ARCH_DAVINCI select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select ZONE_DMA + select HAVE_IDE help Support for TI's DaVinci platform. diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig new file mode 100644 index 0000000..eb2738b --- /dev/null +++ b/arch/arm/configs/davinci_all_defconfig @@ -0,0 +1,1784 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 15 08:16:53 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +CONFIG_ARCH_DAVINCI_DM644x=y + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_EVM=y +CONFIG_DAVINCI_MUX=y +CONFIG_DAVINCI_MUX_DEBUG=y +CONFIG_DAVINCI_MUX_WARNINGS=y +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_DAVINCI=m +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=m +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y +CONFIG_BLK_DEV_PALMCHIP_BK3710=m +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_DAVINCI_WATCHDOG=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=m +# CONFIG_SND_DAVINCI_SOC is not set +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# DaVinci 35x and 644x USB support +# +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From e653034e66ec406f37427f588115badc6fc6af64 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 20 Mar 2009 17:37:21 -0700 Subject: davinci: add runtime CPU detection support Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c index bf067d6..379f2ba 100644 --- a/arch/arm/mach-davinci/id.c +++ b/arch/arm/mach-davinci/id.c @@ -17,6 +17,8 @@ #define JTAG_ID_BASE 0x01c40028 +static unsigned int davinci_revision; + struct davinci_id { u8 variant; /* JTAG ID bits 31:28 */ u16 part_no; /* JTAG ID bits 27:12 */ @@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = { .manufacturer = 0x017, .type = 0x64460000, }, + { + /* DM646X */ + .part_no = 0xb770, + .variant = 0x0, + .manufacturer = 0x017, + .type = 0x64670000, + }, + { + /* DM355 */ + .part_no = 0xb73b, + .variant = 0x0, + .manufacturer = 0x00f, + .type = 0x03550000, + }, }; /* @@ -63,6 +79,12 @@ static u8 __init davinci_get_variant(void) return variant; } +unsigned int davinci_rev(void) +{ + return davinci_revision >> 16; +} +EXPORT_SYMBOL(davinci_rev); + void __init davinci_check_revision(void) { int i; @@ -75,7 +97,7 @@ void __init davinci_check_revision(void) /* First check only the major version in a safe way */ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == (davinci_ids[i].part_no)) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } @@ -84,10 +106,11 @@ void __init davinci_check_revision(void) for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == davinci_ids[i].part_no && variant == davinci_ids[i].variant) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } - printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant); + printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", + davinci_rev(), variant); } diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h new file mode 100644 index 0000000..27cfb1b --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -0,0 +1,49 @@ +/* + * DaVinci CPU type detection + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Defines the cpu_is_*() macros for runtime detection of DaVinci + * device type. In addtion, if support for a given device is not + * compiled in to the kernel, the macros return 0 so that + * resulting code can be optimized out. + * + * 2009 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _ASM_ARCH_CPU_H +#define _ASM_ARCH_CPU_H + +extern unsigned int davinci_rev(void); + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_dm ##type(void) \ +{ \ + return (davinci_rev() == (id)) ? 1 : 0; \ +} + +IS_DAVINCI_CPU(644x, 0x6446) +IS_DAVINCI_CPU(646x, 0x6467) +IS_DAVINCI_CPU(355, 0x355) + +#ifdef CONFIG_ARCH_DAVINCI_DM644x +#define cpu_is_davinci_dm644x() is_davinci_dm644x() +#else +#define cpu_is_davinci_dm644x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM646x +#define cpu_is_davinci_dm646x() is_davinci_dm646x() +#else +#define cpu_is_davinci_dm646x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM355 +#define cpu_is_davinci_dm355() is_davinci_dm355() +#else +#define cpu_is_davinci_dm355() 0 +#endif + +#endif -- cgit v0.10.2 From c5b736d093217890245a33e9a98fe92d6f3529bf Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 20 Mar 2009 17:29:01 -0700 Subject: davinci: major rework of clock, PLL, PSC infrastructure This is a significant rework of the low-level clock, PLL and Power Sleep Controller (PSC) implementation for the DaVinci family. The primary goal is to have better modeling if the hardware clocks and features with the aim of DVFS functionality. Highlights: - model PLLs and all PLL-derived clocks - model parent/child relationships of PLLs and clocks - convert to new clkdev layer - view clock frequency and refcount via /proc/davinci_clocks Special thanks to significant contributions and testing by David Brownell. Cc: David Brownell Signed-off-by: Kevin Hilman diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bb57f35..cfd9964 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -586,6 +586,7 @@ config ARCH_DAVINCI select HAVE_CLK select ZONE_DMA select HAVE_IDE + select COMMON_CLKDEV help Support for TI's DaVinci platform. diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index bac988e..af88673 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -18,6 +18,18 @@ config MACH_DAVINCI_EVM Configure this option to specify the whether the board used for development is a DaVinci EVM +config DAVINCI_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_DAVINCI + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. + endmenu endif diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index 0b97a52..1b745c3 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -406,8 +406,6 @@ davinci_evm_map_io(void) static __init void davinci_evm_init(void) { - davinci_psc_init(); - #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) #if defined(CONFIG_MTD_PHYSMAP) || \ diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index abb92b7..f0baaa1 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -1,7 +1,8 @@ /* - * TI DaVinci clock config file + * Clock and PLL control for DaVinci devices * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -21,98 +23,50 @@ #include #include +#include #include "clock.h" -/* PLL/Reset register offsets */ -#define PLLM 0x110 - static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned int commonrate; -static unsigned int armrate; -static unsigned int fixedrate = 27000000; /* 27 MHZ */ - -extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable); - -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk *clk_get(struct device *dev, const char *id) +static unsigned psc_domain(struct clk *clk) { - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; + return (clk->flags & PSC_DSP) + ? DAVINCI_GPSC_DSPDOMAIN + : DAVINCI_GPSC_ARMDOMAIN; } -EXPORT_SYMBOL(clk_get); -void clk_put(struct clk *clk) +static void __clk_enable(struct clk *clk) { - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - -static int __clk_enable(struct clk *clk) -{ - if (clk->flags & ALWAYS_ENABLED) - return 0; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1); - return 0; + if (clk->parent) + __clk_enable(clk->parent); + if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 1); } static void __clk_disable(struct clk *clk) { - if (clk->usecount) + if (WARN_ON(clk->usecount == 0)) return; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0); + if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + if (clk->parent) + __clk_disable(clk->parent); } int clk_enable(struct clk *clk) { unsigned long flags; - int ret = 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; - if (clk->usecount++ == 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); - return ret; + return 0; } EXPORT_SYMBOL(clk_enable); @@ -123,11 +77,9 @@ void clk_disable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return; - if (clk->usecount > 0 && !(--clk->usecount)) { - spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); @@ -164,10 +116,23 @@ int clk_register(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (WARN(clk->parent && !clk->parent->rate, + "CLK: %s parent %s has no rate!\n", + clk->name, clk->parent->name)) + return -EINVAL; + mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); + list_add_tail(&clk->node, &clocks); mutex_unlock(&clocks_mutex); + /* If rate is already set, use it */ + if (clk->rate) + return 0; + + /* Otherwise, default to parent rate */ + if (clk->parent) + clk->rate = clk->parent->rate; + return 0; } EXPORT_SYMBOL(clk_register); @@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -static struct clk davinci_clks[] = { - { - .name = "ARMCLK", - .rate = &armrate, - .lpsc = -1, - .flags = ALWAYS_ENABLED, - }, - { - .name = "UART", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_UART0, - }, - { - .name = "EMACCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, - }, - { - .name = "I2CCLK", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_I2C, - }, - { - .name = "IDECLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_ATA, - }, - { - .name = "McBSPCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_McBSP, - }, - { - .name = "MMCSDCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_MMC_SD, - }, - { - .name = "SPICLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_SPI, - }, - { - .name = "gpio", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_GPIO, - }, - { - .name = "usb", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_USB, - }, - { - .name = "AEMIFCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_AEMIF, - .usecount = 1, +#ifdef CONFIG_DAVINCI_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + + spin_lock_irq(&clockfw_lock); + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0) + continue; + if (!(ck->flags & CLK_PSC)) + continue; + + /* ignore if in Disabled or SwRstDisable states */ + if (!davinci_psc_is_clk_active(ck->lpsc)) + continue; + + pr_info("Clocks: disable unused %s\n", ck->name); + davinci_psc_config(psc_domain(ck), ck->lpsc, 0); } -}; + spin_unlock_irq(&clockfw_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#endif -int __init davinci_clk_init(void) +static void clk_sysclk_recalc(struct clk *clk) { - struct clk *clkp; - int count = 0; - u32 pll_mult; - - pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM); - commonrate = ((pll_mult + 1) * 27000000) / 6; - armrate = ((pll_mult + 1) * 27000000) / 2; - - for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks); - count++, clkp++) { - clk_register(clkp); - - /* Turn on clocks that have been enabled in the - * table above */ - if (clkp->usecount) - clk_enable(clkp); + u32 v, plldiv; + struct pll_data *pll; + + /* If this is the PLL base clock, no more calculations needed */ + if (clk->pll_data) + return; + + if (WARN_ON(!clk->parent)) + return; + + clk->rate = clk->parent->rate; + + /* Otherwise, the parent must be a PLL */ + if (WARN_ON(!clk->parent->pll_data)) + return; + + pll = clk->parent->pll_data; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + clk->rate = pll->input_rate; + + if (!clk->div_reg) + return; + + v = __raw_readl(pll->base + clk->div_reg); + if (v & PLLDIV_EN) { + plldiv = (v & PLLDIV_RATIO_MASK) + 1; + if (plldiv) + clk->rate /= plldiv; + } +} + +static void __init clk_pll_init(struct clk *clk) +{ + u32 ctrl, mult = 1, prediv = 1, postdiv = 1; + u8 bypass; + struct pll_data *pll = clk->pll_data; + + pll->base = IO_ADDRESS(pll->phys_base); + ctrl = __raw_readl(pll->base + PLLCTL); + clk->rate = pll->input_rate = clk->parent->rate; + + if (ctrl & PLLCTL_PLLEN) { + bypass = 0; + mult = __raw_readl(pll->base + PLLM); + mult = (mult & PLLM_PLLM_MASK) + 1; + } else + bypass = 1; + + if (pll->flags & PLL_HAS_PREDIV) { + prediv = __raw_readl(pll->base + PREDIV); + if (prediv & PLLDIV_EN) + prediv = (prediv & PLLDIV_RATIO_MASK) + 1; + else + prediv = 1; + } + + /* pre-divider is fixed, but (some?) chips won't report that */ + if (cpu_is_davinci_dm355() && pll->num == 1) + prediv = 8; + + if (pll->flags & PLL_HAS_POSTDIV) { + postdiv = __raw_readl(pll->base + POSTDIV); + if (postdiv & PLLDIV_EN) + postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1; + else + postdiv = 1; + } + + if (!bypass) { + clk->rate /= prediv; + clk->rate *= mult; + clk->rate /= postdiv; + } + + pr_debug("PLL%d: input = %lu MHz [ ", + pll->num, clk->parent->rate / 1000000); + if (bypass) + pr_debug("bypass "); + if (prediv > 1) + pr_debug("/ %d ", prediv); + if (mult > 1) + pr_debug("* %d ", mult); + if (postdiv > 1) + pr_debug("/ %d ", postdiv); + pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); +} + +int __init davinci_clk_init(struct davinci_clk *clocks) + { + struct davinci_clk *c; + struct clk *clk; + + for (c = clocks; c->lk.clk; c++) { + clk = c->lk.clk; + + if (clk->pll_data) + clk_pll_init(clk); + + /* Calculate rates for PLL-derived clocks */ + else if (clk->flags & CLK_PLL) + clk_sysclk_recalc(clk); + + if (clk->lpsc) + clk->flags |= CLK_PSC; + + clkdev_add(&c->lk); + clk_register(clk); + + /* Turn on clocks that Linux doesn't otherwise manage */ + if (clk->flags & ALWAYS_ENABLED) + clk_enable(clk); } return 0; @@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v) { } -static int davinci_ck_show(struct seq_file *m, void *v) +#define CLKNAME_MAX 10 /* longest clock name */ +#define NEST_DELTA 2 +#define NEST_MAX 4 + +static void +dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) { - struct clk *cp; + char *state; + char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; + struct clk *clk; + unsigned i; + + if (parent->flags & CLK_PLL) + state = "pll"; + else if (parent->flags & CLK_PSC) + state = "psc"; + else + state = ""; + + /* name */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", + buf, parent->usecount, state, clk_get_rate(parent)); + /* REVISIT show device associations too */ + + /* cost is now small, but not linear... */ + list_for_each_entry(clk, &clocks, node) { + if (clk->parent == parent) + dump_clock(s, nest + NEST_DELTA, clk); + } +} - list_for_each_entry(cp, &clocks, node) - seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount); +static int davinci_ck_show(struct seq_file *m, void *v) +{ + /* Show clock tree; we know the main oscillator is first. + * We trust nonzero usecounts equate to PSC enables... + */ + mutex_lock(&clocks_mutex); + if (!list_empty(&clocks)) + dump_clock(m, 0, list_first_entry(&clocks, struct clk, node)); + mutex_unlock(&clocks_mutex); return 0; } @@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void) } __initcall(davinci_ck_proc_init); -#endif /* CONFIG_DEBUG_PROC_FS */ +#endif /* CONFIG_DEBUG_PROC_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index ed47079..35736ec 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -1,7 +1,8 @@ /* * TI DaVinci clock definitions * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,23 +12,85 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H +#include +#include + +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define MAX_PLL 2 + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_CLKMODE BIT(8) + +#define PLLM 0x110 +#define PLLM_PLLM_MASK 0xff + +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f + +struct pll_data { + u32 phys_base; + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; +}; +#define PLL_HAS_PREDIV 0x01 +#define PLL_HAS_POSTDIV 0x02 + struct clk { struct list_head node; struct module *owner; const char *name; - unsigned int *rate; - int id; - __s8 usecount; - __u8 flags; - __u8 lpsc; + unsigned long rate; + u8 usecount; + u8 flags; + u8 lpsc; + struct clk *parent; + struct pll_data *pll_data; + u32 div_reg; }; /* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 +#define ALWAYS_ENABLED BIT(1) +#define CLK_PSC BIT(2) +#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ +#define CLK_PLL BIT(4) /* PLL-derived clock */ +#define PRE_PLL BIT(5) /* source is before PLL mult/div */ + +struct davinci_clk { + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck) \ + { \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } +int davinci_clk_init(struct davinci_clk *clocks); #endif diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h new file mode 100644 index 0000000..730c49d --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index 38bdd49..a3b0402 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -17,6 +17,5 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); #endif diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 4977aa0..55a90d4 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -38,8 +38,6 @@ #define DAVINCI_LPSC_TPTC1 4 #define DAVINCI_LPSC_EMAC 5 #define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 #define DAVINCI_LPSC_USB 9 #define DAVINCI_LPSC_ATA 10 #define DAVINCI_LPSC_VLYNQ 11 @@ -47,7 +45,6 @@ #define DAVINCI_LPSC_DDR_EMIF 13 #define DAVINCI_LPSC_AEMIF 14 #define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 #define DAVINCI_LPSC_McBSP 17 #define DAVINCI_LPSC_I2C 18 #define DAVINCI_LPSC_UART0 19 @@ -73,4 +70,54 @@ #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DM355_LPSC_TIMER3 5 +#define DM355_LPSC_SPI1 6 +#define DM355_LPSC_MMC_SD1 7 +#define DM355_LPSC_McBSP1 8 +#define DM355_LPSC_PWM3 10 +#define DM355_LPSC_SPI2 11 +#define DM355_LPSC_RTO 12 +#define DM355_LPSC_VPSS_DAC 41 + +/* + * LPSC Assignments + */ +#define DM646X_LPSC_ARM 0 +#define DM646X_LPSC_C64X_CPU 1 +#define DM646X_LPSC_HDVICP0 2 +#define DM646X_LPSC_HDVICP1 3 +#define DM646X_LPSC_TPCC 4 +#define DM646X_LPSC_TPTC0 5 +#define DM646X_LPSC_TPTC1 6 +#define DM646X_LPSC_TPTC2 7 +#define DM646X_LPSC_TPTC3 8 +#define DM646X_LPSC_PCI 13 +#define DM646X_LPSC_EMAC 14 +#define DM646X_LPSC_VDCE 15 +#define DM646X_LPSC_VPSSMSTR 16 +#define DM646X_LPSC_VPSSSLV 17 +#define DM646X_LPSC_TSIF0 18 +#define DM646X_LPSC_TSIF1 19 +#define DM646X_LPSC_DDR_EMIF 20 +#define DM646X_LPSC_AEMIF 21 +#define DM646X_LPSC_McASP0 22 +#define DM646X_LPSC_McASP1 23 +#define DM646X_LPSC_CRGEN0 24 +#define DM646X_LPSC_CRGEN1 25 +#define DM646X_LPSC_UART0 26 +#define DM646X_LPSC_UART1 27 +#define DM646X_LPSC_UART2 28 +#define DM646X_LPSC_PWM0 29 +#define DM646X_LPSC_PWM1 30 +#define DM646X_LPSC_I2C 31 +#define DM646X_LPSC_SPI 32 +#define DM646X_LPSC_GPIO 33 +#define DM646X_LPSC_TIMER0 34 +#define DM646X_LPSC_TIMER1 35 +#define DM646X_LPSC_ARM_INTC 45 + +extern int davinci_psc_is_clk_active(unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int id, + char enable); + #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 299515f..71a7ae3 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -53,5 +53,4 @@ void __init davinci_map_common_io(void) void __init davinci_init_common_hw(void) { - davinci_clk_init(); } diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 58754f0..c509883 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -36,76 +37,57 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 -/* System control register offsets */ -#define VDD3P3V_PWDN 0x48 -static void davinci_psc_mux(unsigned int id) +/* Return nonzero iff the domain's clock is active */ +int __init davinci_psc_is_clk_active(unsigned int id) { - switch (id) { - case DAVINCI_LPSC_ATA: - davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1); - davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1); - break; - case DAVINCI_LPSC_MMC_SD: - /* VDD power manupulations are done in U-Boot for CPMAC - * so applies to MMC as well - */ - /*Set up the pull regiter for MMC */ - davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN); - davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0); - break; - case DAVINCI_LPSC_I2C: - davinci_mux_peripheral(DAVINCI_MUX_I2C, 1); - break; - case DAVINCI_LPSC_McBSP: - davinci_mux_peripheral(DAVINCI_MUX_ASP, 1); - break; - default: - break; - } + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + + /* if clocked, state can be "Enable" or "SyncReset" */ + return mdstat & BIT(12); } /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); if (enable) mdctl |= 0x00000003; /* Enable Module */ else - mdctl &= 0xFFFFFFF2; /* Disable Module */ - davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + mdctl &= 0xFFFFFFE2; /* Disable Module */ + __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT); if ((pdstat & 0x00000001) == 0) { - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - EPCPR); + epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x100; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } else { ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - PTSTAT); + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } @@ -115,23 +97,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) mdstat_mask = 0x2; do { - mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - MDSTAT + 4 * id); + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); } while (!((mdstat & 0x0000001F) == mdstat_mask)); - - if (enable) - davinci_psc_mux(id); -} - -void __init davinci_psc_init(void) -{ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1); - - /* Turn on WatchDog timer LPSC. Needed for RESET to work */ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1); } -- cgit v0.10.2 From f5c122da543ebf98a5ccb3166768e38eea3120dd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 07:04:16 -0500 Subject: davinci: add arch_ioremap() which uses existing static mappings Add arch-specific ioremap() which uses any existing static mappings in place of doing a new mapping. From now on, drivers should always use ioremap() instead of IO_ADDRESS(). In addition, remove the davinci_[read|write]* macros in favor of using ioremap. Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index 1b745c3..c2701d7 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -36,6 +36,9 @@ #include #include +#define DAVINCI_CFC_ATA_BASE 0x01C66000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + /* other misc. init functions */ void __init davinci_psc_init(void); void __init davinci_irq_init(void); @@ -422,7 +425,6 @@ static __init void davinci_evm_init(void) static __init void davinci_evm_irq_init(void) { - davinci_init_common_hw(); davinci_irq_init(); } diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 808633f..3ea6d47 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -22,6 +22,8 @@ #include #include +#define DAVINCI_I2C_BASE 0x01C21000 + static struct resource i2c_resources[] = { { .start = DAVINCI_I2C_BASE, diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c index 379f2ba..018b994 100644 --- a/arch/arm/mach-davinci/id.c +++ b/arch/arm/mach-davinci/id.c @@ -15,7 +15,7 @@ #include #include -#define JTAG_ID_BASE 0x01c40028 +#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) static unsigned int davinci_revision; @@ -58,7 +58,7 @@ static u16 __init davinci_get_part_no(void) { u32 dev_id, part_no; - dev_id = davinci_readl(JTAG_ID_BASE); + dev_id = __raw_readl(JTAG_ID_BASE); part_no = ((dev_id >> 12) & 0xffff); @@ -72,7 +72,7 @@ static u8 __init davinci_get_variant(void) { u32 variant; - variant = davinci_readl(JTAG_ID_BASE); + variant = __raw_readl(JTAG_ID_BASE); variant = (variant >> 28) & 0xf; diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index b456f07..5e7c36b 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -15,9 +15,11 @@ #include #include -#include + #include +#define DAVINCI_GPIO_BASE 0x01C67000 + /* * basic gpio routines * diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index a2e8969..48c7793 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -1,9 +1,9 @@ /* - * Common hardware definitions + * Hardware definitions common to all DaVinci family processors * - * Author: Kevin Hilman, MontaVista Software, Inc. + * Author: Kevin Hilman, Deep Root Systems, LLC * - * 2007 (c) MontaVista Software, Inc. This file is licensed under + * 2007 (c) Deep Root Systems, LLC. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -12,41 +12,16 @@ #define __ASM_ARCH_HARDWARE_H /* - * Base register addresses + * Before you add anything to ths file: + * + * This header is for defines common to ALL DaVinci family chips. + * Anything that is chip specific should go in .h, + * and the chip/board init code should then explicitly include + * .h */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) +#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 + +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h index a48795f..2479785 100644 --- a/arch/arm/mach-davinci/include/mach/io.h +++ b/arch/arm/mach-davinci/include/mach/io.h @@ -40,22 +40,12 @@ #else #define IOMEM(x) ((void __force __iomem *)(x)) -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) __raw_readb(IO_ADDRESS(a)) -#define davinci_readw(a) __raw_readw(IO_ADDRESS(a)) -#define davinci_readl(a) __raw_readl(IO_ADDRESS(a)) +#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) +#define __arch_iounmap(v) davinci_iounmap(v) -#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a)) -#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a)) -#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a)) +void __iomem *davinci_ioremap(unsigned long phys, size_t size, + unsigned int type); +void davinci_iounmap(volatile void __iomem *addr); #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 71a7ae3..a548abb 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -51,6 +51,26 @@ void __init davinci_map_common_io(void) davinci_check_revision(); } -void __init davinci_init_common_hw(void) +#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(davinci_ioremap); + +void davinci_iounmap(volatile void __iomem *addr) { + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); } +EXPORT_SYMBOL(davinci_iounmap); diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 38021af..e76835c 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -40,14 +40,16 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + static inline unsigned int davinci_irq_readl(int offset) { - return davinci_readl(DAVINCI_ARM_INTC_BASE + offset); + return __raw_readl(INTC_BASE + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset); + __raw_writel(value, INTC_BASE + offset); } /* Disable interrupt */ diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 8ff9d8a..53734de 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -23,6 +23,7 @@ static DEFINE_SPINLOCK(mux_lock); void davinci_mux_peripheral(unsigned int mux, unsigned int enable) { + void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); u32 pinmux, muxreg = PINMUX0; if (mux >= DAVINCI_MUX_LEVEL2) { @@ -31,11 +32,11 @@ void davinci_mux_peripheral(unsigned int mux, unsigned int enable) } spin_lock(&mux_lock); - pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg); + pinmux = __raw_readl(base + muxreg); if (enable) pinmux |= (1 << mux); else pinmux &= ~(1 << mux); - davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg); + __raw_writel(pinmux, base + muxreg); spin_unlock(&mux_lock); } diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index c509883..e44544a 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -28,6 +28,8 @@ #include #include +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 6c227d4..88864ae 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -16,6 +16,9 @@ #include #include #include +#include +#include +#include #include #include @@ -24,6 +27,8 @@ #include #include #include +#include +#include "clock.h" static struct clock_event_device clockevent_davinci; @@ -99,9 +104,9 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; - unsigned long reg_base; - unsigned long tim_reg; - unsigned long prd_reg; + void __iomem *base; + unsigned long tim_off; + unsigned long prd_off; unsigned long enamode_shift; struct irqaction irqaction; }; @@ -114,15 +119,15 @@ static struct timer_s timers[]; static int timer32_config(struct timer_s *t) { - u32 tcr = davinci_readl(t->reg_base + TCR); + u32 tcr = __raw_readl(t->base + TCR); /* disable timer */ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); /* reset counter to zero, set new period */ - davinci_writel(0, t->tim_reg); - davinci_writel(t->period, t->prd_reg); + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); /* Set enable mode */ if (t->opts & TIMER_OPTS_ONESHOT) { @@ -131,13 +136,13 @@ static int timer32_config(struct timer_s *t) tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; } - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); return 0; } static inline u32 timer32_read(struct timer_s *t) { - return davinci_readl(t->tim_reg); + return __raw_readl(t->base + t->tim_off); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -176,51 +181,54 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { - u32 tgcr, base = bases[i]; + u32 tgcr; + void __iomem *base = IO_ADDRESS(phys_bases[i]); /* Disabled, Internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset both timers, no pre-scaler for timer34 */ tgcr = 0; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Set both timers to unchained 32-bit */ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Unreset timers */ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Init both counters to zero */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); } /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; + u32 phys_base; if (t->name) { t->id = i; - t->reg_base = (IS_TIMER1(t->id) ? + phys_base = (IS_TIMER1(t->id) ? DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); + t->base = IO_ADDRESS(phys_base); if (IS_TIMER_BOT(t->id)) { t->enamode_shift = 6; - t->tim_reg = t->reg_base + TIM12; - t->prd_reg = t->reg_base + PRD12; + t->tim_off = TIM12; + t->prd_off = PRD12; } else { t->enamode_shift = 22; - t->tim_reg = t->reg_base + TIM34; - t->prd_reg = t->reg_base + PRD34; + t->tim_off = TIM34; + t->prd_off = PRD34; } /* Register interrupt */ @@ -333,42 +341,43 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ void davinci_watchdog_reset(void) { - u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE; + u32 tgcr, wdtcr; + void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); /* disable, internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset timer, set mode to 64-bit watchdog, and unreset */ tgcr = 0; - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT; tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); /* clear counter and period regs */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); - davinci_writel(0, base + PRD12); - davinci_writel(0, base + PRD34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); + __raw_writel(0, base + PRD12); + __raw_writel(0, base + PRD34); /* enable */ - wdtcr = davinci_readl(base + WDTCR); + wdtcr = __raw_readl(base + WDTCR); wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in pre-active state */ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in active state */ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* write an invalid value to the WDKEY field to trigger * a watchdog reset */ wdtcr = 0x00004000; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); } diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 2429b79..abedb63 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -14,6 +14,8 @@ #include #include +#define DAVINCI_USB_OTG_BASE 0x01C64000 + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, -- cgit v0.10.2 From da1b94e6a68e1bdeb9cdda016cceb17228b37d25 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 23 Apr 2009 11:10:40 -0700 Subject: ARM: OMAP: Fix for possible race condition in omap_free_dma() Fix the possible race condition in omap_free_dma(). Function omap_free_dma() sets the dev_id = -1 and then accesses the channel afterwards to clear it. But setting the dev_id=-1 makes the channel available for allocation again. So it is possible someone else can grab it and results are unpredictable. To avod this DMA channle is cleared first and then the dev_id = -1 is set. Thanks to McNeil, Sean for ointing out this issue. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 21cc014..7fc8c04 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -760,19 +760,12 @@ void omap_free_dma(int lch) { unsigned long flags; - spin_lock_irqsave(&dma_chan_lock, flags); if (dma_chan[lch].dev_id == -1) { pr_err("omap_dma: trying to free unallocated DMA channel %d\n", lch); - spin_unlock_irqrestore(&dma_chan_lock, flags); return; } - dma_chan[lch].dev_id = -1; - dma_chan[lch].next_lch = -1; - dma_chan[lch].callback = NULL; - spin_unlock_irqrestore(&dma_chan_lock, flags); - if (cpu_class_is_omap1()) { /* Disable all DMA interrupts for the channel. */ dma_write(0, CICR(lch)); @@ -798,6 +791,12 @@ void omap_free_dma(int lch) dma_write(0, CCR(lch)); omap_clear_dma(lch); } + + spin_lock_irqsave(&dma_chan_lock, flags); + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); } EXPORT_SYMBOL(omap_free_dma); -- cgit v0.10.2 From ba16ec7cabb3f1aa7bbcb7b9982c4402a2e8ec02 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 23 Apr 2009 11:10:40 -0700 Subject: ARM: OMAP: Remove old dead gpio expander code This should be done with GPIO calls. Patches against the mainline tree welcome to add the necessary working functionality back. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4695965..f597968 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -39,12 +39,10 @@ #include #include -#include #include #include #include #include -#include #include #include #include @@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = { .resource = h3_kp_resources, }; - -/* Select between the IrDA and aGPS module - */ -static int h3_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x26))) { - printk(KERN_ERR "Error reading from I/O EXPANDER \n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDA */ - if ((err = write_gpio_expa(expa | 0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x27)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x03; - - if (mode & IR_SIRMODE) { - expa |= 0x01; - } else { /* MIR/FIR */ - expa |= 0x03; - } - - if ((err = write_gpio_expa(expa, 0x27)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h3_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h3_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h3_transceiver_mode, - .select_irda = h3_select_irda, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource h3_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device h3_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &h3_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(h3_irda_resources), - .resource = h3_irda_resources, -}; - static struct platform_device h3_lcd_device = { .name = "lcd_h3", .id = -1, @@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = { &nand_device, &smc91x_device, &intlat_device, - &h3_irda_device, &h3_kp_device, &h3_lcd_device, }; diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a0267a9..e7d017c 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,10 +33,8 @@ #include #include -#include #include #include -#include #include #include #include @@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -/* Select between the IrDA and aGPS module - */ -static int h4_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x21))) { - printk(KERN_ERR "Error reading from I/O expander\n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDa */ - if ((err = write_gpio_expa(expa | 0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x20)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x01; - - if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ - expa |= 0x01; - } - - if ((err = write_gpio_expa(expa, 0x20)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h4_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h4_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h4_transceiver_mode, - .select_irda = h4_select_irda, - .rx_channel = OMAP24XX_DMA_UART3_RX, - .tx_channel = OMAP24XX_DMA_UART3_TX, - .dest_start = OMAP_UART3_BASE, - .src_start = OMAP_UART3_BASE, - .tx_trigger = OMAP24XX_DMA_UART3_TX, - .rx_trigger = OMAP24XX_DMA_UART3_RX, -}; - -static struct resource h4_irda_resources[] = { - [0] = { - .start = INT_24XX_UART3_IRQ, - .end = INT_24XX_UART3_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &h4_irda_data, - }, - .num_resources = 1, - .resource = h4_irda_resources, -}; - static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, @@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = { static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_irda_device, &h4_kp_device, &h4_lcd_device, }; diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h deleted file mode 100644 index 90444a0..0000000 --- a/arch/arm/plat-omap/include/mach/gpioexpander.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h index 8372a00..40f6033 100644 --- a/arch/arm/plat-omap/include/mach/irda.h +++ b/arch/arm/plat-omap/include/mach/irda.h @@ -21,10 +21,6 @@ struct omap_irda_config { int transceiver_cap; int (*transceiver_mode)(struct device *dev, int mode); int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; int rx_channel; int tx_channel; unsigned long dest_start; -- cgit v0.10.2 From 1748ae0e95760d62de501743f883af6833f33357 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 23 Apr 2009 11:10:44 -0700 Subject: ARM: OMAP: MMC: Remove unused power_pin Remove unused power_pin Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index 4435bd4..81d5b36 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -79,7 +79,6 @@ struct omap_mmc_platform_data { /* use the internal clock */ unsigned internal_clock:1; - s16 power_pin; int switch_pin; /* gpio (card detect) */ int gpio_wp; /* gpio (write protect) */ diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 5570849..bfa25c0 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -157,8 +157,6 @@ struct mmc_omap_host { struct timer_list dma_timer; unsigned dma_len; - short power_pin; - struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS]; struct mmc_omap_slot *current_slot; spinlock_t slot_lock; -- cgit v0.10.2 From 6a3260755fc0d86adacd912e3acf40e9ac5bbe2e Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 23 Apr 2009 11:10:47 -0700 Subject: ARM: OMAP1: Simplify board-h2 MMC setup Simplify board-h2 MMC setup Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 44d4a96..46098f5 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -26,19 +26,13 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } static int mmc_late_init(struct device *dev) { - int ret; - - ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); + int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); if (ret < 0) return ret; @@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev) return ret; } -static void mmc_shutdown(struct device *dev) +static void mmc_cleanup(struct device *dev) { gpio_free(H2_TPS_GPIO_MMC_PWR_EN); } @@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev) static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, - .shutdown = mmc_shutdown, + .cleanup = mmc_cleanup, .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, -- cgit v0.10.2 From bac5b29fb9582df22b4c1386162ac31b62edf121 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 23 Apr 2009 11:10:48 -0700 Subject: ARM: OMAP1: Fix mmc_set_power GPIO usage Simple simplification... Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 0d8a3c1..5e8877c 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -26,11 +26,7 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7bc7a3c..d1ed136 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1); - else - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0); - + gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); return 0; } -- cgit v0.10.2 From 6b7bff3169192e2870f68f47fde25a22e136918e Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 23 Apr 2009 11:10:48 -0700 Subject: ARM: OMAP2: Remove defines and resource init for OMAP24XX EAC There is no anymore legacy driver for OMAP24XX Enhanced Audio Controller in linux-omap and it was newer in mainline so cleanup these unneeded defines and initialization code. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d6b4b2f..496983a 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -366,38 +365,6 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif -#ifdef CONFIG_SND_OMAP24XX_EAC - -#define OMAP2_EAC_BASE 0x48090000 - -static struct resource omap2_eac_resources[] = { - { - .start = OMAP2_EAC_BASE, - .end = OMAP2_EAC_BASE + 0x109, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_eac_device = { - .name = "omap24xx-eac", - .id = -1, - .num_resources = ARRAY_SIZE(omap2_eac_resources), - .resource = omap2_eac_resources, - .dev = { - .platform_data = NULL, - }, -}; - -void omap_init_eac(struct eac_platform_data *pdata) -{ - omap2_eac_device.dev.platform_data = pdata; - platform_device_register(&omap2_eac_device); -} - -#else -void omap_init_eac(struct eac_platform_data *pdata) {} -#endif - #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h deleted file mode 100644 index 9e62cf0..0000000 --- a/arch/arm/plat-omap/include/mach/eac.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include -#include -#include - -#include - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ -- cgit v0.10.2 From d94a2eddf50c4aa1553acf3025f45d03704a1f97 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 23 Apr 2009 11:10:49 -0700 Subject: ARM: OMAP2: possible division by 0 In linus' git tree the functions can be found at: vi arch/arm/mach-omap2/usb-tusb6010.c +200 - tusb6010_platform_retime() vi arch/arm/mach-omap2/gpmc.c +94 - gpmc_get_fclk_period() vi arch/arm/mach-omap2/usb-tusb6010.c +53 - tusb_set_async_mode() vi arch/arm/mach-omap2/usb-tusb6010.c +111 - tusb_set_sync_mode() is -ENODEV appropriate when sysclk_ps == 0? This was found by code analysis, please review. ------------------------------>8-------------8<--------------------------------- gpmc_get_fclk_period() may return 0 when gpmc_l3_clk is not enabled. This is not checked in tusb6010_platform_retime() nor in tusb_set_async_mode() it seems. In tusb_set_sync_mode() this may result in a division by zero. Signed-off-by: Roel Kluin Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 15e5090..8df55f4 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec) + if (!refclk_psec || sysclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; -- cgit v0.10.2 From b3bb4f688c225d9455bbd59e98f634f98c1074d0 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 23 Apr 2009 11:10:49 -0700 Subject: ARM: OMAP2/3: GPIO: do not attempt to wake-enable The GPIO IRQ enable/disable path attempts to also enable IRQ wake support for the parent GPIO bank IRQ as well. However, since there is no 'set_wake' hook for the bank IRQs, these calls will always fail. Also, since the enable will fail on the suspend path, the disable on the resume path will trigger unbalanced enable/disable warnings. This was discovered in the suspend/resume path on OMAP3/Beagle using the gpio-keys driver which disables/re-enables GPIO IRQ wakeups in the suspend/resume path. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d3fa41e..210a1c0 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -921,13 +921,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -940,13 +937,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif -- cgit v0.10.2 From c485ab50dd90412d88e25ed30b4e0d5ff636ffe2 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 23 Apr 2009 11:10:49 -0700 Subject: ARM: OMAP3: remove duplicated #include Removed duplicated #include in arch/arm/mach-omap2/board-rx51.c. Signed-off-by: Huang Weiyi Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3a0daac..374ff63 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From bedfd15410a331e4183d3d926bb944682cad61f3 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 23 Apr 2009 11:10:50 -0700 Subject: ARM: OMAP3: Fixed spurious IRQ issue for GPIO interrupts Flush posted write to IRQSTATUS register in GPIO IRQ handler. This eliminates the below error for all peripherals that use GPIO interrupts. <4>Spurious irq 95: 0xffffffdf, please flush posted write for irq 31 Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 210a1c0..17d7afe 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; if (cpu_is_omap24xx() || cpu_is_omap34xx()) - __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); #endif } -- cgit v0.10.2 From 846c29f109fc27bd93817271689a752afc9168f8 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 23 Apr 2009 11:10:50 -0700 Subject: ARM: OMAP3: Clean up spurious interrupt check logic SPURIOUSIRQ is contained in bits 31:7 of INTC_SIR, so INTC_SIR must be right shifted by 7, not 6. No change in logic, only changes for better readability. Refer to register definition of INTCPS_SIR_IRQ in OMAP3 Manual. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 9ba20d9..998c5c4 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq) u32 sir, spurious; sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); - spurious = sir >> 6; + spurious = sir >> 7; - if (spurious > 1) { + if (spurious) { printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " "posted write for irq %i\n", irq, sir, previous_irq); -- cgit v0.10.2 From 33e86019f77b6358bfe06767e08154be032d8751 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 23 Apr 2009 22:53:43 +0200 Subject: palm_bk3710: those registers/bitfields don't exist Bugfixes noted by checking the code against the controller documentation (TI document number SPRUE21): - Remove declarations for eight non-existent registers (!); and remove accesses to two of them. - Remove access to various non-existent bitfields in some of the registers which *do* exist (those fields must-be-zero). - Provide comment to replace bogus reset logic (removed above, it relied on non-existent bitfields). Resets require GPIO help; this driver doesn't currently know about that. With some minor cleanup: relocate a comment, avoid an extra lookup of the PIO timings. Signed-off-by: David Brownell Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index d1513b4..13a5449 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -42,16 +42,9 @@ #define BK3710_BMICP 0x00 #define BK3710_BMISP 0x02 #define BK3710_BMIDTP 0x04 -#define BK3710_BMICS 0x08 -#define BK3710_BMISS 0x0A -#define BK3710_BMIDTS 0x0C #define BK3710_IDETIMP 0x40 -#define BK3710_IDETIMS 0x42 -#define BK3710_SIDETIM 0x44 -#define BK3710_SLEWCTL 0x45 #define BK3710_IDESTATUS 0x47 #define BK3710_UDMACTL 0x48 -#define BK3710_UDMATIM 0x4A #define BK3710_MISCCTL 0x50 #define BK3710_REGSTB 0x54 #define BK3710_REGRCVR 0x58 @@ -63,7 +56,6 @@ #define BK3710_UDMATRP 0x70 #define BK3710_UDMAENV 0x74 #define BK3710_IORDYTMP 0x78 -#define BK3710_IORDYTMS 0x7C static unsigned ideclk_period; /* in nanoseconds */ @@ -96,11 +88,6 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime, ideclk_period) - 1; - /* udmatim Register */ - val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0); - val16 |= (mode << (dev ? 4 : 0)); - writew(val16, base + BK3710_UDMATIM); - /* udmastb Ultra DMA Access Strobe Width */ val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8)); val32 |= (t0 << (dev ? 8 : 0)); @@ -161,10 +148,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, u32 val32; struct ide_timing *t; + t = ide_timing_find_mode(XFER_PIO_0 + mode); + /* PIO Data Setup */ t0 = DIV_ROUND_UP(cycletime, ideclk_period); - t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active, - ideclk_period); + t2 = DIV_ROUND_UP(t->active, ideclk_period); t2i = t0 - t2 - 1; t2 -= 1; @@ -185,7 +173,6 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, } /* TASKFILE Setup */ - t = ide_timing_find_mode(XFER_PIO_0 + mode); t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period); t2 = DIV_ROUND_UP(t->act8b, ideclk_period); @@ -234,42 +221,23 @@ static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) static void __devinit palm_bk3710_chipinit(void __iomem *base) { /* - * enable the reset_en of ATA controller so that when ata signals - * are brought out, by writing into device config. at that - * time por_n signal should not be 'Z' and have a stable value. + * REVISIT: the ATA reset signal needs to be managed through a + * GPIO, which means it should come from platform_data. Until + * we get and use such information, we have to trust that things + * have been reset before we get here. */ - writel(0x0300, base + BK3710_MISCCTL); - - /* wait for some time and deassert the reset of ATA Device. */ - mdelay(100); - - /* Deassert the Reset */ - writel(0x0200, base + BK3710_MISCCTL); /* * Program the IDETIMP Register Value based on the following assumptions * * (ATA_IDETIMP_IDEEN , ENABLE ) | - * (ATA_IDETIMP_SLVTIMEN , DISABLE) | - * (ATA_IDETIMP_RDYSMPL , 70NS) | - * (ATA_IDETIMP_RDYRCVRY , 50NS) | - * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) | * (ATA_IDETIMP_PREPOST1 , DISABLE) | - * (ATA_IDETIMP_RDYSEN1 , DISABLE) | - * (ATA_IDETIMP_PIOFTIM1 , DISABLE) | - * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) | * (ATA_IDETIMP_PREPOST0 , DISABLE) | - * (ATA_IDETIMP_RDYSEN0 , DISABLE) | - * (ATA_IDETIMP_PIOFTIM0 , DISABLE) - */ - writew(0xB388, base + BK3710_IDETIMP); - - /* - * Configure SIDETIM Register - * (ATA_SIDETIM_RDYSMPS1 ,120NS ) | - * (ATA_SIDETIM_RDYRCYS1 ,120NS ) + * + * DM6446 silicon rev 2.1 and earlier have no observed net benefit + * from enabling prefetch/postwrite. */ - writeb(0, base + BK3710_SIDETIM); + writew(BIT(15), base + BK3710_IDETIMP); /* * UDMACTL Ultra-ATA DMA Control @@ -281,11 +249,11 @@ static void __devinit palm_bk3710_chipinit(void __iomem *base) /* * MISCCTL Miscellaneous Conrol Register - * (ATA_MISCCTL_RSTMODEP , 1) | - * (ATA_MISCCTL_RESETP , 0) | + * (ATA_MISCCTL_HWNHLD1P , 1 cycle) + * (ATA_MISCCTL_HWNHLD0P , 1 cycle) * (ATA_MISCCTL_TIMORIDE , 1) */ - writel(0x201, base + BK3710_MISCCTL); + writel(0x001, base + BK3710_MISCCTL); /* * IORDYTMP IORDY Timer for Primary Register @@ -355,10 +323,9 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) clk_enable(clk); rate = clk_get_rate(clk); - ideclk_period = 1000000000UL / rate; - /* Register the IDE interface with Linux ATA Interface */ - memset(&hw, 0, sizeof(hw)); + /* NOTE: round *down* to meet minimum timings; we count in clocks */ + ideclk_period = 1000000000UL / rate; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (mem == NULL) { @@ -388,6 +355,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) /* Configure the Palm Chip controller */ palm_bk3710_chipinit(base); + memset(&hw, 0, sizeof(hw)); for (i = 0; i < IDE_NR_PORTS - 2; i++) hw.io_ports_array[i] = (unsigned long) (base + IDE_PALM_ATA_PRI_REG_OFFSET + i); @@ -400,6 +368,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 : ATA_UDMA5; + /* Register the IDE interface with Linux */ rc = ide_host_add(&palm_bk3710_port_info, hws, NULL); if (rc) goto out; -- cgit v0.10.2 From d7f5143522d938ea7c4f117c6fa6b1d3fa5af994 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 23 Apr 2009 22:53:45 +0200 Subject: palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup Remove superfluous commas and add missing whitespaces. Noticed-by: Joe Perches Cc: David Brownell Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index 13a5449..09d813d 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -66,12 +66,12 @@ struct palm_bk3710_udmatiming { }; static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { - {160, 240 / 2,}, /* UDMA Mode 0 */ - {125, 160 / 2,}, /* UDMA Mode 1 */ - {100, 120 / 2,}, /* UDMA Mode 2 */ - {100, 90 / 2,}, /* UDMA Mode 3 */ - {100, 60 / 2,}, /* UDMA Mode 4 */ - {85, 40 / 2,}, /* UDMA Mode 5 */ + { 160, 240 / 2 }, /* UDMA Mode 0 */ + { 125, 160 / 2 }, /* UDMA Mode 1 */ + { 100, 120 / 2 }, /* UDMA Mode 2 */ + { 100, 90 / 2 }, /* UDMA Mode 3 */ + { 100, 60 / 2 }, /* UDMA Mode 4 */ + { 85, 40 / 2 }, /* UDMA Mode 5 */ }; static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, -- cgit v0.10.2 From b930f964cfe65941c6b1ba61efedfe49da3f6353 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 23 Apr 2009 22:53:45 +0200 Subject: MAINTAINERS: update IDE entry By a popular demand quilt tree was replaced by a git one. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/MAINTAINERS b/MAINTAINERS index 0beac8a..2431b05 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2743,7 +2743,7 @@ IDE SUBSYSTEM P: Bartlomiej Zolnierkiewicz M: bzolnier@gmail.com L: linux-ide@vger.kernel.org -T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git S: Maintained F: Documentation/ide/ F: drivers/ide/ -- cgit v0.10.2 From 2d93148ab6988cad872e65d694c95e8944e1b626 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 Apr 2009 11:31:02 -0400 Subject: USB: serial: fix lifetime and locking problems This patch (as1229) fixes a few lifetime and locking problems in the usb-serial driver. The main symptom is that an invalid kevent is created when the serial device is unplugged while a connection is active. Ports should be unregistered when device is disconnected, not when the parent usb_serial structure is deallocated. Each open file should hold a reference to the corresponding port structure, and the reference should be released when the file is closed. serial->disc_mutex should be acquired in serial_open(), to resolve the classic race between open and disconnect. serial_close() doesn't need to hold both serial->disc_mutex and port->mutex at the same time. Release the subdriver's module reference only after releasing all the other references, in case one of the release routines needs to invoke some code in the subdriver module. Replace a call to flush_scheduled_work() (which is prone to deadlocks) with cancel_work_sync(). Also, add a call to cancel_work_sync() in the disconnect routine. Reduce the scope of serial->disc_mutex in serial_disconnect(). The only place it really needs to protect is where the "disconnected" flag is set. This fixes the bug reported in http://bugs.freedesktop.org/show_bug.cgi?id=20703 Signed-off-by: Alan Stern Tested-by: Dan Williams Tested-by: Ming Lei Reviewed-by: Oliver Neukum Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 2a70563..0a566ee 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -137,22 +137,10 @@ static void destroy_serial(struct kref *kref) dbg("%s - %s", __func__, serial->type->description); - serial->type->shutdown(serial); - /* return the minor range that this device had */ if (serial->minor != SERIAL_TTY_NO_MINOR) return_serial(serial); - for (i = 0; i < serial->num_ports; ++i) - serial->port[i]->port.count = 0; - - /* the ports are cleaned up and released in port_release() */ - for (i = 0; i < serial->num_ports; ++i) - if (serial->port[i]->dev.parent != NULL) { - device_unregister(&serial->port[i]->dev); - serial->port[i] = NULL; - } - /* If this is a "fake" port, we have to clean it up here, as it will * not get cleaned up in port_release() as it was never registered with * the driver core */ @@ -187,7 +175,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp) struct usb_serial *serial; struct usb_serial_port *port; unsigned int portNumber; - int retval; + int retval = 0; dbg("%s", __func__); @@ -198,21 +186,24 @@ static int serial_open (struct tty_struct *tty, struct file *filp) return -ENODEV; } + mutex_lock(&serial->disc_mutex); portNumber = tty->index - serial->minor; port = serial->port[portNumber]; - if (!port) { - retval = -ENODEV; - goto bailout_kref_put; - } - - if (port->serial->disconnected) { + if (!port || serial->disconnected) retval = -ENODEV; - goto bailout_kref_put; - } + else + get_device(&port->dev); + /* + * Note: Our locking order requirement does not allow port->mutex + * to be acquired while serial->disc_mutex is held. + */ + mutex_unlock(&serial->disc_mutex); + if (retval) + goto bailout_serial_put; if (mutex_lock_interruptible(&port->mutex)) { retval = -ERESTARTSYS; - goto bailout_kref_put; + goto bailout_port_put; } ++port->port.count; @@ -232,14 +223,20 @@ static int serial_open (struct tty_struct *tty, struct file *filp) goto bailout_mutex_unlock; } - retval = usb_autopm_get_interface(serial->interface); + mutex_lock(&serial->disc_mutex); + if (serial->disconnected) + retval = -ENODEV; + else + retval = usb_autopm_get_interface(serial->interface); if (retval) goto bailout_module_put; + /* only call the device specific open if this * is the first time the port is opened */ retval = serial->type->open(tty, port, filp); if (retval) goto bailout_interface_put; + mutex_unlock(&serial->disc_mutex); } mutex_unlock(&port->mutex); @@ -248,13 +245,16 @@ static int serial_open (struct tty_struct *tty, struct file *filp) bailout_interface_put: usb_autopm_put_interface(serial->interface); bailout_module_put: + mutex_unlock(&serial->disc_mutex); module_put(serial->type->driver.owner); bailout_mutex_unlock: port->port.count = 0; tty->driver_data = NULL; tty_port_tty_set(&port->port, NULL); mutex_unlock(&port->mutex); -bailout_kref_put: +bailout_port_put: + put_device(&port->dev); +bailout_serial_put: usb_serial_put(serial); return retval; } @@ -262,6 +262,9 @@ bailout_kref_put: static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial; + struct module *owner; + int count; if (!port) return; @@ -269,6 +272,8 @@ static void serial_close(struct tty_struct *tty, struct file *filp) dbg("%s - port %d", __func__, port->number); mutex_lock(&port->mutex); + serial = port->serial; + owner = serial->type->driver.owner; if (port->port.count == 0) { mutex_unlock(&port->mutex); @@ -281,7 +286,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp) * this before we drop the port count. The call is protected * by the port mutex */ - port->serial->type->close(tty, port, filp); + serial->type->close(tty, port, filp); if (port->port.count == (port->console ? 2 : 1)) { struct tty_struct *tty = tty_port_tty_get(&port->port); @@ -295,17 +300,23 @@ static void serial_close(struct tty_struct *tty, struct file *filp) } } - if (port->port.count == 1) { - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) - usb_autopm_put_interface(port->serial->interface); - mutex_unlock(&port->serial->disc_mutex); - module_put(port->serial->type->driver.owner); - } --port->port.count; - + count = port->port.count; mutex_unlock(&port->mutex); - usb_serial_put(port->serial); + put_device(&port->dev); + + /* Mustn't dereference port any more */ + if (count == 0) { + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + usb_autopm_put_interface(serial->interface); + mutex_unlock(&serial->disc_mutex); + } + usb_serial_put(serial); + + /* Mustn't dereference serial any more */ + if (count == 0) + module_put(owner); } static int serial_write(struct tty_struct *tty, const unsigned char *buf, @@ -549,7 +560,13 @@ static void kill_traffic(struct usb_serial_port *port) static void port_free(struct usb_serial_port *port) { + /* + * Stop all the traffic before cancelling the work, so that + * nobody will restart it by calling usb_serial_port_softint. + */ kill_traffic(port); + cancel_work_sync(&port->work); + usb_free_urb(port->read_urb); usb_free_urb(port->write_urb); usb_free_urb(port->interrupt_in_urb); @@ -558,7 +575,6 @@ static void port_free(struct usb_serial_port *port) kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); kfree(port->interrupt_out_buffer); - flush_scheduled_work(); /* port->work */ kfree(port); } @@ -1043,6 +1059,12 @@ void usb_serial_disconnect(struct usb_interface *interface) usb_set_intfdata(interface, NULL); /* must set a flag, to signal subdrivers */ serial->disconnected = 1; + mutex_unlock(&serial->disc_mutex); + + /* Unfortunately, many of the sub-drivers expect the port structures + * to exist when their shutdown method is called, so we have to go + * through this awkward two-step unregistration procedure. + */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (port) { @@ -1052,11 +1074,21 @@ void usb_serial_disconnect(struct usb_interface *interface) tty_kref_put(tty); } kill_traffic(port); + cancel_work_sync(&port->work); + device_del(&port->dev); + } + } + serial->type->shutdown(serial); + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + if (port) { + put_device(&port->dev); + serial->port[i] = NULL; } } + /* let the last holder of this object * cause it to be cleaned up */ - mutex_unlock(&serial->disc_mutex); usb_serial_put(serial); dev_info(dev, "device disconnected\n"); } -- cgit v0.10.2 From 46c6e93faa85d1362e1d127dc28cf9d0b304a6f1 Mon Sep 17 00:00:00 2001 From: Chuck Short Date: Tue, 14 Apr 2009 20:50:31 +0200 Subject: USB: Unusual Device support for Gold MP3 Player Energy Reported by Alessio Treglia on https://bugs.launchpad.net/ubuntu/+source/linux/+bug/125250 User was getting the following errors in dmesg: [ 2158.139386] sd 5:0:0:1: ioctl_internal_command return code = 8000002 [ 2158.139390] : Current: sense key: No Sense [ 2158.139393] Additional sense: No additional sense information Adds unusual device support. modified: drivers/usb/storage/unusual_devs.h Signed-off-by: Chuck Short Signed-off-by: Tim Gardner Signed-off-by: Stefan Bader Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 96db479..fa65a3b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1851,6 +1851,12 @@ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_CAPACITY_HEURISTICS), +/* Reported by Alessio Treglia */ +UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, + "TGE", + "Digital MP3 Audio Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), + /* Control/Bulk transport for all SubClass values */ USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), -- cgit v0.10.2 From f23e649bb605523b960434c5e18c8e9ad3f0b5bd Mon Sep 17 00:00:00 2001 From: David Lopo Date: Thu, 16 Apr 2009 14:35:24 -0700 Subject: USB: Gadget: MIPS CI13xxx UDC bugfixes Bug Fix: high speed detection in LPM mode Bug Fix: max packet size configuration when switching between HS and FS Signed-off-by: David Lopo Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 22c6596..05af881 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -142,7 +142,7 @@ static struct { #define CAP_DEVICEADDR (0x014UL) #define CAP_ENDPTLISTADDR (0x018UL) #define CAP_PORTSC (0x044UL) -#define CAP_DEVLC (0x0B4UL) +#define CAP_DEVLC (0x084UL) #define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL) #define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL) #define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL) @@ -1986,6 +1986,8 @@ static int ep_enable(struct usb_ep *ep, do { dbg_event(_usb_addr(mEp), "ENABLE", 0); + mEp->qh[mEp->dir].ptr->cap = 0; + if (mEp->type == USB_ENDPOINT_XFER_CONTROL) mEp->qh[mEp->dir].ptr->cap |= QH_IOS; else if (mEp->type == USB_ENDPOINT_XFER_ISOC) -- cgit v0.10.2 From 9cceedb8a87f31e341c1bf1bc6c28a13f9632aff Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 17 Apr 2009 13:52:00 +0300 Subject: USB: musb: Remove my email address from few musb related drivers This email address is going to expire soon and my contribution to musb is next to zero so remove it. Signed-off-by: Jarkko Nikula Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 901dffd..60924ce 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -3,7 +3,6 @@ * Some code has been taken from tusb6010.c * Copyrights for that are attributable to: * Copyright (C) 2006 Nokia Corporation - * Jarkko Nikula * Tony Lindgren * * This file is part of the Inventra Controller Driver for Linux. diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 9e20fd0..4ac1477 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -2,7 +2,6 @@ * TUSB6010 USB 2.0 OTG Dual Role controller * * Copyright (C) 2006 Nokia Corporation - * Jarkko Nikula * Tony Lindgren * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h index ab8c962..35c933a 100644 --- a/drivers/usb/musb/tusb6010.h +++ b/drivers/usb/musb/tusb6010.h @@ -2,7 +2,6 @@ * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller * * Copyright (C) 2006 Nokia Corporation - * Jarkko Nikula * Tony Lindgren * * This program is free software; you can redistribute it and/or modify -- cgit v0.10.2 From 10c966c310da12e1e3f68d717a8e15274fdadf29 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Fri, 17 Apr 2009 15:19:14 +0400 Subject: USB: musb: fix build when !CONFIG_PM Fix this build error when CONFIG_PM is not set: drivers/usb/musb/musb_core.c:2232: error: 'musb_resume_early' undeclared here Signed-off-by: Alexander Beregalov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 0112353..4000cf6 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2191,7 +2191,7 @@ static int musb_resume_early(struct platform_device *pdev) #else #define musb_suspend NULL -#define musb_resume NULL +#define musb_resume_early NULL #endif static struct platform_driver musb_driver = { -- cgit v0.10.2 From e9b8cffa923e8eb3fe70ea05d3fcfffc90a71a57 Mon Sep 17 00:00:00 2001 From: Tony Cook Date: Sat, 18 Apr 2009 22:42:18 +0930 Subject: USB: mos7840: add new device id add USB ids for the mos7840 based ATEN International serial devices. Contributed by: Phillip Branch Signed-off-by: Tony Cook Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2c20e88..567985b 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -123,6 +123,11 @@ #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 #define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 +/* This driver also supports the ATEN UC2324 device since it is mos7840 based + * - if I knew the device id it would also support the ATEN UC2322 */ +#define USB_VENDOR_ID_ATENINTL 0x0557 +#define ATENINTL_DEVICE_ID_UC2324 0x2011 + /* Interrupt Routine Defines */ #define SERIAL_IIR_RLS 0x06 @@ -170,6 +175,7 @@ static struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {} /* terminating entry */ }; @@ -178,6 +184,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {} /* terminating entry */ }; -- cgit v0.10.2 From 37768adf9a1d49aeac0db1ba3dc28b3274b7b789 Mon Sep 17 00:00:00 2001 From: Tony Cook Date: Sat, 18 Apr 2009 22:42:18 +0930 Subject: USB: fix mos7840 problem with minor numbers This patch fixes a problem with any mos7840 device where the use of the field "minor" before it is initialised results in all the devices being overlaid in memory (minor = 0 for all instances) Contributed by: Phillip Branch Signed-off-by: Tony Cook Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 567985b..499b7b8 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -38,7 +38,7 @@ /* * Version Information */ -#define DRIVER_VERSION "1.3.1" +#define DRIVER_VERSION "1.3.2" #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver" /* @@ -2484,9 +2484,14 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_set_port_private(serial->port[i], mos7840_port); spin_lock_init(&mos7840_port->pool_lock); - mos7840_port->port_num = ((serial->port[i]->number - - (serial->port[i]->serial->minor)) + - 1); + /* minor is not initialised until later by + * usb-serial.c:get_free_serial() and cannot therefore be used + * to index device instances */ + mos7840_port->port_num = i + 1; + dbg ("serial->port[i]->number = %d", serial->port[i]->number); + dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor); + dbg ("mos7840_port->port_num = %d", mos7840_port->port_num); + dbg ("serial->minor = %d", serial->minor); if (mos7840_port->port_num == 1) { mos7840_port->SpRegOffset = 0x0; @@ -2697,13 +2702,16 @@ static void mos7840_shutdown(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = mos7840_get_port_private(serial->port[i]); - spin_lock_irqsave(&mos7840_port->pool_lock, flags); - mos7840_port->zombie = 1; - spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); - usb_kill_urb(mos7840_port->control_urb); - kfree(mos7840_port->ctrl_buf); - kfree(mos7840_port->dr); - kfree(mos7840_port); + dbg ("mos7840_port %d = %p", i, mos7840_port); + if (mos7840_port) { + spin_lock_irqsave(&mos7840_port->pool_lock, flags); + mos7840_port->zombie = 1; + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); + usb_kill_urb(mos7840_port->control_urb); + kfree(mos7840_port->ctrl_buf); + kfree(mos7840_port->dr); + kfree(mos7840_port); + } mos7840_set_port_private(serial->port[i], NULL); } -- cgit v0.10.2 From c065c60e83c006611caed23d1320450fcd709398 Mon Sep 17 00:00:00 2001 From: Dan Streetman Date: Tue, 21 Apr 2009 13:37:12 -0400 Subject: USB: ehci-sched.c: EHCI SITD scheduling bugfix Without this patch, the driver won't check that the last fully-occupied uframe for a new split transaction was vacant beforehand. This can lead to a situation in which the first 188 bytes of a 192-byte isochronous transfer are scheduled in the same uframe as an existing interrupt transfer. The resulting schedule looks like this: uframe 0: 188-byte isoc-OUT SSPLIT, 8-byte int-IN SSPLIT uframe 1: 4-byte isoc-OUT SSPLIT The SSPLITs are intermingled, causing an error in the downstream hub's TT. If you are having problems with devices or hub ports resetting, or failed interrupt transfers, when you start using a USB audio or video (Isochronous) device, this patch may help. Signed-off-by: Dan Streetman Reported-by: Kung James Acked-by: David Brownell Cc: Alan Stern diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index ada5d2b..556d0ec 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -323,7 +323,7 @@ static int tt_available ( * already scheduled transactions */ if (125 < usecs) { - int ufs = (usecs / 125) - 1; + int ufs = (usecs / 125); int i; for (i = uframe; i < (uframe + ufs) && i < 8; i++) if (0 < tt_usecs[i]) { -- cgit v0.10.2 From 82a10a81c853be3859b3d222db0f372ee8d2eaa2 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 16 Apr 2009 15:37:28 -0400 Subject: USB: g_file_storage: fix use-after-free bug when closing files This patch (as1231) fixes a use-after-free bug in g_file_storage. A device's name may not be available after the device is unregistered, even if the device structure itself is still allocated. Since close_backing_file() prints a LUN's name for debugging, it shouldn't be called after the LUN has been unregistered. That whole area needed to be cleaned up; the backing files were getting closed in a couple of different places. The patch fixes things so that they get closed in just one place, as part of the unbind procedure, immediately before the LUN is unregistered. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 5c030b0..381a53b 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -738,7 +738,6 @@ static struct fsg_dev *the_fsg; static struct usb_gadget_driver fsg_driver; static void close_backing_file(struct lun *curlun); -static void close_all_backing_files(struct fsg_dev *fsg); /*-------------------------------------------------------------------------*/ @@ -3593,12 +3592,10 @@ static int fsg_main_thread(void *fsg_) fsg->thread_task = NULL; spin_unlock_irq(&fsg->lock); - /* In case we are exiting because of a signal, unregister the - * gadget driver and close the backing file. */ - if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) { + /* If we are exiting because of a signal, unregister the + * gadget driver. */ + if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) usb_gadget_unregister_driver(&fsg_driver); - close_all_backing_files(fsg); - } /* Let the unbind and cleanup routines know the thread has exited */ complete_and_exit(&fsg->thread_notifier, 0); @@ -3703,14 +3700,6 @@ static void close_backing_file(struct lun *curlun) } } -static void close_all_backing_files(struct fsg_dev *fsg) -{ - int i; - - for (i = 0; i < fsg->nluns; ++i) - close_backing_file(&fsg->luns[i]); -} - static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf) { @@ -3845,6 +3834,7 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) if (curlun->registered) { device_remove_file(&curlun->dev, &dev_attr_ro); device_remove_file(&curlun->dev, &dev_attr_file); + close_backing_file(curlun); device_unregister(&curlun->dev); curlun->registered = 0; } @@ -4190,7 +4180,6 @@ autoconf_fail: out: fsg->state = FSG_STATE_TERMINATED; // The thread is dead fsg_unbind(gadget); - close_all_backing_files(fsg); complete(&fsg->thread_notifier); return rc; } @@ -4284,7 +4273,6 @@ static void __exit fsg_cleanup(void) /* Wait for the thread to finish up */ wait_for_completion(&fsg->thread_notifier); - close_all_backing_files(fsg); kref_put(&fsg->ref, fsg_release); } module_exit(fsg_cleanup); -- cgit v0.10.2 From a8aa401f38cfb5fa26e970b48e93fb851d68fe64 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 18 Apr 2009 11:00:39 +0200 Subject: USB: pass mem_flags to dma_alloc_coherent When I want to use my webcam, I get: vvvvvvv cheese: page allocation failure. order:5, mode:0x8004 Pid: 8100, comm: cheese Not tainted 2.6.30-rc2-wl-dirty #102 Call Trace: [] __alloc_pages_internal+0x3fe/0x520 [] dma_generic_alloc_coherent+0x90/0x120 [] hcd_buffer_alloc+0xee/0x130 [usbcore] [] usb_buffer_alloc+0x2d/0x40 [usbcore] [] uvc_alloc_urb_buffers+0x84/0x140 [uvcvideo] [] uvc_init_video+0x126/0x400 [uvcvideo] [...] Oddly, I remembered fixing this and putting in __GFP_NOWARN because uvcvideo retries a smaller allocation. However, the allocation function doesn't pass the gfp flags through to dma_alloc_coherent so we still get the warning! Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index cadb2dc..3ba2fff 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -119,7 +119,7 @@ void *hcd_buffer_alloc( if (size <= pool_max [i]) return dma_pool_alloc(hcd->pool [i], mem_flags, dma); } - return dma_alloc_coherent(hcd->self.controller, size, dma, 0); + return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags); } void hcd_buffer_free( -- cgit v0.10.2 From fbfc396efbc11d784b4325adfc02e82a0df01a8d Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Tue, 21 Apr 2009 20:52:54 -0700 Subject: USB: musb: Prevent multiple includes of musb.h Add #ifndef to musb header file to prevent multiple inclusions. Signed-off-by: Mark A. Greer Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index d6aad0e..d437556 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -7,6 +7,9 @@ * key configuration differences between boards. */ +#ifndef __LINUX_USB_MUSB_H +#define __LINUX_USB_MUSB_H + /* The USB role is defined by the connector used on the board, so long as * standards are being followed. (Developer boards sometimes won't.) */ @@ -101,3 +104,5 @@ extern int __init tusb6010_setup_interface( extern int tusb6010_platform_retime(unsigned is_refclk); #endif /* OMAP2 */ + +#endif /* __LINUX_USB_MUSB_H */ -- cgit v0.10.2 From 36825a2deca913a11915893b6ecf5e1d817b6e75 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 15 Apr 2009 22:28:36 +0200 Subject: USB: ci13xxx_udc: fix build error Fix build error in the MIPS USB IP core family device controller driver. The driver calls udelay() without including linux/delay.h Signed-off-by: Matthias Kaehlcke Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 05af881..38e531e 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -51,6 +51,7 @@ * - Gadget API (majority of optional features) * - Suspend & Remote Wakeup */ +#include #include #include #include -- cgit v0.10.2 From 864e28b4f24106b799e991fa136fa6fa2b638a68 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 16 Apr 2009 13:51:46 -0700 Subject: USB: gadget: omap_udc uses platform_driver_probe() We now have a more correct solution for shrinking runtime driver footprints than just marking probe() as __init ... use it. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 57d9641..a2db0e1 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -3104,7 +3104,6 @@ static int omap_udc_resume(struct platform_device *dev) /*-------------------------------------------------------------------------*/ static struct platform_driver udc_driver = { - .probe = omap_udc_probe, .remove = __exit_p(omap_udc_remove), .suspend = omap_udc_suspend, .resume = omap_udc_resume, @@ -3122,7 +3121,7 @@ static int __init udc_init(void) #endif "%s\n", driver_desc, use_dma ? " (dma)" : ""); - return platform_driver_register(&udc_driver); + return platform_driver_probe(&udc_driver, omap_udc_probe); } module_init(udc_init); -- cgit v0.10.2 From 212b8f0c3f5a2280bfa1d6ab13a6fe98552becaa Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Tue, 21 Apr 2009 17:54:42 -0700 Subject: USB: serial: sierra driver bug fix for composite interface This patch fixes a problem in sierra_send_setup() function when composite devices are used. One should not be sending ACM commands to interfaces that are OBEX. Doing this causes an apparent failure as the ACM command has to time out before the interface can start being used. Signed-off-by: Elina Pasheva Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index d9bf9a5..7da3775 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -14,7 +14,7 @@ Whom based his on the Keyspan driver by Hugh Blemings */ -#define DRIVER_VERSION "v.1.3.2" +#define DRIVER_VERSION "v.1.3.3" #define DRIVER_AUTHOR "Kevin Lloyd " #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -259,9 +259,21 @@ static int sierra_send_setup(struct tty_struct *tty, val |= 0x02; /* If composite device then properly report interface */ - if (serial->num_ports == 1) + if (serial->num_ports == 1) { interface = sierra_calc_interface(serial); + /* Control message is sent only to interfaces with + * interrupt_in endpoints + */ + if (port->interrupt_in_urb) { + /* send control message */ + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, + NULL, 0, USB_CTRL_SET_TIMEOUT); + } + } + /* Otherwise the need to do non-composite mapping */ else { if (port->bulk_out_endpointAddress == 2) @@ -270,12 +282,13 @@ static int sierra_send_setup(struct tty_struct *tty, interface = 1; else if (port->bulk_out_endpointAddress == 5) interface = 2; - } - return usb_control_msg(serial->dev, + return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + + } } return 0; -- cgit v0.10.2 From 2400a2bfbd0e912193fe3b077f492d4980141813 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 20 Apr 2009 17:28:53 +0200 Subject: USB: removal of tty->low_latency hack dating back to the old serial code This removes tty->low_latency from all USB serial drivers that push data into the tty layer at hard interrupt context. It's no longer needed and actually harmful. Signed-off-by: Oliver Neukum Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 858bdd0..dd501bb 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -175,13 +175,6 @@ static int cyberjack_open(struct tty_struct *tty, dbg("%s - usb_clear_halt", __func__); usb_clear_halt(port->serial->dev, port->write_urb->pipe); - /* force low_latency on so that our tty_push actually forces - * the data through, otherwise it is scheduled, and with high - * data rates (like with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - priv = usb_get_serial_port_data(port); spin_lock_irqsave(&priv->lock, flags); priv->rdtodo = 0; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index eae4740..e568710 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -656,10 +656,6 @@ static int cypress_open(struct tty_struct *tty, priv->rx_flags = 0; spin_unlock_irqrestore(&priv->lock, flags); - /* setting to zero could cause data loss */ - if (tty) - tty->low_latency = 1; - /* raise both lines and set termios */ spin_lock_irqsave(&priv->lock, flags); priv->line_control = CONTROL_DTR | CONTROL_RTS; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 8a69cce..c709ec4 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -478,12 +478,6 @@ static void empeg_set_termios(struct tty_struct *tty, termios->c_cflag |= CS8; /* character size 8 bits */ - /* - * Force low_latency on; otherwise the pushes are scheduled; - * this is bad as it opens up the possibility of dropping bytes - * on the floor. We don't want to drop bytes on the floor. :) - */ - tty->low_latency = 1; tty_encode_baud_rate(tty, 115200, 115200); } diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index a26a0e2..586d30f 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -973,14 +973,6 @@ static int garmin_open(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->mode = initial_mode; garmin_data_p->count = 0; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 9d57cac..4cec990 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -122,12 +122,6 @@ int usb_serial_generic_open(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - /* force low_latency on so that our tty_push actually forces the data - through, otherwise it is scheduled, and with high data rates (like - with OHCI) data can get lost. */ - if (tty) - tty->low_latency = 1; - /* clear the throttle flags */ spin_lock_irqsave(&port->lock, flags); port->throttled = 0; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index e85c8c0..fb4a73d 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -193,8 +193,6 @@ static const struct divisor_table_entry divisor_table[] = { /* local variables */ static int debug; -static int low_latency = 1; /* tty low latency flag, on by default */ - static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ @@ -867,9 +865,6 @@ static int edge_open(struct tty_struct *tty, if (edge_port == NULL) return -ENODEV; - if (tty) - tty->low_latency = low_latency; - /* see if we've set up our endpoint info yet (can't set it up in edge_startup as the structures were not set up at that time.) */ serial = port->serial; @@ -3299,6 +3294,3 @@ MODULE_FIRMWARE("edgeport/down2.fw"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); - -module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, "Low latency enabled or not"); diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index c3cdd00..513b25e 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -76,7 +76,6 @@ struct edgeport_uart_buf_desc { #define EDGE_READ_URB_STOPPING 1 #define EDGE_READ_URB_STOPPED 2 -#define EDGE_LOW_LATENCY 1 #define EDGE_CLOSING_WAIT 4000 /* in .01 sec */ #define EDGE_OUT_BUF_SIZE 1024 @@ -232,7 +231,6 @@ static unsigned short OperationalBuildNumber; static int debug; -static int low_latency = EDGE_LOW_LATENCY; static int closing_wait = EDGE_CLOSING_WAIT; static int ignore_cpu_rev; static int default_uart_mode; /* RS232 */ @@ -1850,9 +1848,6 @@ static int edge_open(struct tty_struct *tty, if (edge_port == NULL) return -ENODEV; - if (tty) - tty->low_latency = low_latency; - port_number = port->number - port->serial->minor; switch (port_number) { case 0: @@ -3008,9 +3003,6 @@ MODULE_FIRMWARE("edgeport/down3.bin"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, "Low latency enabled or not"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs"); diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index ef92095..cd62825 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -631,13 +631,7 @@ static int ipaq_open(struct tty_struct *tty, priv->free_len += PACKET_SIZE; } - /* - * Force low latency on. This will immediately push data to the line - * discipline instead of queueing. - */ - if (tty) { - tty->low_latency = 1; /* FIXME: These two are bogus */ tty->raw = 1; tty->real_raw = 1; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index f530032..da2a2b4 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -207,9 +207,6 @@ static int ipw_open(struct tty_struct *tty, if (!buf_flow_init) return -ENOMEM; - if (tty) - tty->low_latency = 1; - /* --1: Tell the modem to initialize (we think) From sniffs this is * always the first thing that gets sent to the modem during * opening of the device */ diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 2314c6a..4473d44 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -1051,7 +1051,6 @@ static int iuu_open(struct tty_struct *tty, tty->termios->c_oflag = 0; tty->termios->c_iflag = 0; priv->termios_initialized = 1; - tty->low_latency = 1; priv->poll = 0; } spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 6286baa..c148544 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -231,13 +231,7 @@ static int kobil_open(struct tty_struct *tty, /* someone sets the dev to 0 if the close method has been called */ port->interrupt_in_urb->dev = port->serial->dev; - - /* force low_latency on so that our tty_push actually forces - * the data through, otherwise it is scheduled, and with high - * data rates (like with OHCI) data can get lost. - */ if (tty) { - tty->low_latency = 1; /* Default to echo off and other sane device settings */ tty->termios->c_lflag = 0; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index e772cc0..24e3b5d 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -446,13 +446,6 @@ static int mos7720_open(struct tty_struct *tty, data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); - /* force low_latency on so that our tty_push actually forces * - * the data through,otherwise it is scheduled, and with * - * high data rates (like with OHCI) data can get lost. */ - - if (tty) - tty->low_latency = 1; - /* see if we've set up our endpoint info yet * * (can't set it up in mos7720_startup as the * * structures were not set up at that time.) */ diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 499b7b8..84fb1dc 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1007,12 +1007,6 @@ static int mos7840_open(struct tty_struct *tty, status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); - /* force low_latency on so that our tty_push actually forces * - * the data through,otherwise it is scheduled, and with * - * high data rates (like with OHCI) data can get lost. */ - if (tty) - tty->low_latency = 1; - /* Check to see if we've set up our endpoint info yet * * (can't set it up in mos7840_startup as the structures * * were not set up at that time.) */ diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 839583d..b500ad1 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -159,14 +159,6 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port, priv->port = port; spin_unlock_irqrestore(&priv->lock, flags); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - /* Start reading from the device */ usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev, usb_rcvbulkpipe(priv->udev, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 47bd070..7817b82 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -936,9 +936,6 @@ static int option_open(struct tty_struct *tty, usb_pipeout(urb->pipe), 0); */ } - if (tty) - tty->low_latency = 1; - option_send_setup(tty, port); return 0; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 7da3775..913225c 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -598,9 +598,6 @@ static int sierra_open(struct tty_struct *tty, } } - if (tty) - tty->low_latency = 1; - sierra_send_setup(tty, port); /* start up the interrupt endpoint if we have one */ diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 9c4c700..0a64bac 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -50,11 +50,10 @@ #define TI_TRANSFER_TIMEOUT 2 -#define TI_DEFAULT_LOW_LATENCY 0 #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */ /* supported setserial flags */ -#define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY) +#define TI_SET_SERIAL_FLAGS 0 /* read urb states */ #define TI_READ_URB_RUNNING 0 @@ -161,7 +160,6 @@ static int ti_buf_get(struct circ_buf *cb, char *buf, int count); /* module parameters */ static int debug; -static int low_latency = TI_DEFAULT_LOW_LATENCY; static int closing_wait = TI_DEFAULT_CLOSING_WAIT; static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_3410_count; @@ -296,10 +294,6 @@ MODULE_FIRMWARE("mts_edge.fw"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes"); -module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, - "TTY low_latency flag, 0=off, 1=on, default is off"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000"); @@ -448,7 +442,6 @@ static int ti_startup(struct usb_serial *serial) spin_lock_init(&tport->tp_lock); tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); - tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0; tport->tp_closing_wait = closing_wait; init_waitqueue_head(&tport->tp_msr_wait); init_waitqueue_head(&tport->tp_write_wait); @@ -528,10 +521,6 @@ static int ti_open(struct tty_struct *tty, if (mutex_lock_interruptible(&tdev->td_open_close_lock)) return -ERESTARTSYS; - if (tty) - tty->low_latency = - (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; - port_number = port->number - port->serial->minor; memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount)); @@ -1454,7 +1443,6 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, return -EFAULT; tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; - tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; tport->tp_closing_wait = new_serial.closing_wait; return 0; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 4facce3..5ac414b 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -296,14 +296,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, priv->throttled = 0; spin_unlock_irqrestore(&priv->lock, flags); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - /* Start reading from the device */ usb_fill_bulk_urb(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, -- cgit v0.10.2 From 052fbc0d7f76106725c998183d64dcacecd21f8f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 20 Apr 2009 17:24:49 +0200 Subject: USB: correct error handling in cdc-wdm This patch to cdc-wdm - checks for partial extra descriptors - fixes a leak in the error case of probe - checks for an exact number of endpoints - adds a clarifying comment Signed-off-by: Oliver Neukum Cc: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 34e6108..0fe4345 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -3,7 +3,7 @@ * * This driver supports USB CDC WCM Device Management. * - * Copyright (c) 2007-2008 Oliver Neukum + * Copyright (c) 2007-2009 Oliver Neukum * * Some code taken from cdc-acm.c * @@ -610,7 +610,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) if (!buffer) goto out; - while (buflen > 0) { + while (buflen > 2) { if (buffer [1] != USB_DT_CS_INTERFACE) { dev_err(&intf->dev, "skipping garbage\n"); goto next_desc; @@ -646,16 +646,18 @@ next_desc: spin_lock_init(&desc->iuspin); init_waitqueue_head(&desc->wait); desc->wMaxCommand = maxcom; + /* this will be expanded and needed in hardware endianness */ desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber); desc->intf = intf; INIT_WORK(&desc->rxwork, wdm_rxwork); - iface = &intf->altsetting[0]; + rv = -EINVAL; + iface = intf->cur_altsetting; + if (iface->desc.bNumEndpoints != 1) + goto err; ep = &iface->endpoint[0].desc; - if (!ep || !usb_endpoint_is_int_in(ep)) { - rv = -EINVAL; + if (!ep || !usb_endpoint_is_int_in(ep)) goto err; - } desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize); desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0; @@ -711,12 +713,19 @@ next_desc: usb_set_intfdata(intf, desc); rv = usb_register_dev(intf, &wdm_class); - dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n", - intf->minor - WDM_MINOR_BASE); if (rv < 0) - goto err; + goto err3; + else + dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n", + intf->minor - WDM_MINOR_BASE); out: return rv; +err3: + usb_set_intfdata(intf, NULL); + usb_buffer_free(interface_to_usbdev(desc->intf), + desc->bMaxPacketSize0, + desc->inbuf, + desc->response->transfer_dma); err2: usb_buffer_free(interface_to_usbdev(desc->intf), desc->wMaxPacketSize, -- cgit v0.10.2 From ecf85e481a716cfe07406439fdc7ba9526bbfaeb Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Tue, 21 Apr 2009 20:33:10 -0700 Subject: USB: otg: Fix bug on remove path without transceiver In the case where a gadget driver is removed while no transceiver was found at probe time, a bug in otg_put_transceiver() will trigger. Provide symetric calls for otg_get_transceiver() and otg_put_transceiver(), wherever a transceiver was found or not. Signed-off-by: Robert Jarzmik Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c index ff318fa..0a43a7d 100644 --- a/drivers/usb/otg/otg.c +++ b/drivers/usb/otg/otg.c @@ -43,7 +43,8 @@ EXPORT_SYMBOL(otg_get_transceiver); */ void otg_put_transceiver(struct otg_transceiver *x) { - put_device(x->dev); + if (x) + put_device(x->dev); } EXPORT_SYMBOL(otg_put_transceiver); -- cgit v0.10.2 From 6b35ca0d3d586b8ecb8396821af21186e20afaf0 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Tue, 21 Apr 2009 21:48:09 +0200 Subject: USB: pwc : do not pass stack allocated buffers to USB core. This is causes problems on platforms that have alignment requirements for DMA transfers. Signed-off-by: Martin Fuzzey Acked-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index f9fbe02..50b415e 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -159,35 +159,67 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev); /****************************************************************************/ +static int _send_control_msg(struct pwc_device *pdev, + u8 request, u16 value, int index, void *buf, int buflen, int timeout) +{ + int rc; + void *kbuf = NULL; + + if (buflen) { + kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */ + if (kbuf == NULL) + return -ENOMEM; + memcpy(kbuf, buf, buflen); + } -#define SendControlMsg(request, value, buflen) \ - usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \ - request, \ - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ - value, \ - pdev->vcinterface, \ - &buf, buflen, 500) + rc = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), + request, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + kbuf, buflen, timeout); -#define RecvControlMsg(request, value, buflen) \ - usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \ - request, \ - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ - value, \ - pdev->vcinterface, \ - &buf, buflen, 500) + kfree(kbuf); + return rc; +} +static int recv_control_msg(struct pwc_device *pdev, + u8 request, u16 value, void *buf, int buflen) +{ + int rc; + void *kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */ + + if (kbuf == NULL) + return -ENOMEM; + + rc = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), + request, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + pdev->vcinterface, + kbuf, buflen, 500); + memcpy(buf, kbuf, buflen); + kfree(kbuf); + return rc; +} -static int send_video_command(struct usb_device *udev, int index, void *buf, int buflen) +static inline int send_video_command(struct pwc_device *pdev, + int index, void *buf, int buflen) { - return usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), + return _send_control_msg(pdev, SET_EP_STREAM_CTL, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, VIDEO_OUTPUT_CONTROL_FORMATTER, index, buf, buflen, 1000); } +static inline int send_control_msg(struct pwc_device *pdev, + u8 request, u16 value, void *buf, int buflen) +{ + return _send_control_msg(pdev, + request, value, pdev->vcinterface, buf, buflen, 500); +} + static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames) @@ -224,7 +256,7 @@ static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames) return -EINVAL; memcpy(buf, pEntry->mode, 3); - ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3); + ret = send_video_command(pdev, pdev->vendpoint, buf, 3); if (ret < 0) { PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret); return ret; @@ -285,7 +317,7 @@ static int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, i memcpy(buf, pChoose->mode, 13); if (snapshot) buf[0] |= 0x80; - ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13); + ret = send_video_command(pdev, pdev->vendpoint, buf, 13); if (ret < 0) return ret; @@ -358,7 +390,7 @@ static int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, i buf[0] |= 0x80; /* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */ - ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12); + ret = send_video_command(pdev, 4 /* pdev->vendpoint */, buf, 12); if (ret < 0) return ret; @@ -530,7 +562,8 @@ int pwc_get_brightness(struct pwc_device *pdev) char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; return buf; @@ -545,7 +578,8 @@ int pwc_set_brightness(struct pwc_device *pdev, int value) if (value > 0xffff) value = 0xffff; buf = (value >> 9) & 0x7f; - return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf)); } /* CONTRAST */ @@ -555,7 +589,8 @@ int pwc_get_contrast(struct pwc_device *pdev) char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; return buf; @@ -570,7 +605,8 @@ int pwc_set_contrast(struct pwc_device *pdev, int value) if (value > 0xffff) value = 0xffff; buf = (value >> 10) & 0x3f; - return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf)); } /* GAMMA */ @@ -580,7 +616,8 @@ int pwc_get_gamma(struct pwc_device *pdev) char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; return buf; @@ -595,7 +632,8 @@ int pwc_set_gamma(struct pwc_device *pdev, int value) if (value > 0xffff) value = 0xffff; buf = (value >> 11) & 0x1f; - return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf)); } @@ -613,7 +651,8 @@ int pwc_get_saturation(struct pwc_device *pdev, int *value) saturation_register = SATURATION_MODE_FORMATTER2; else saturation_register = SATURATION_MODE_FORMATTER1; - ret = RecvControlMsg(GET_CHROM_CTL, saturation_register, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, saturation_register, &buf, sizeof(buf)); if (ret < 0) return ret; *value = (signed)buf; @@ -636,7 +675,8 @@ int pwc_set_saturation(struct pwc_device *pdev, int value) saturation_register = SATURATION_MODE_FORMATTER2; else saturation_register = SATURATION_MODE_FORMATTER1; - return SendControlMsg(SET_CHROM_CTL, saturation_register, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, saturation_register, &buf, sizeof(buf)); } /* AGC */ @@ -651,7 +691,8 @@ int pwc_set_agc(struct pwc_device *pdev, int mode, int value) else buf = 0xff; /* fixed */ - ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf)); if (!mode && ret >= 0) { if (value < 0) @@ -659,7 +700,8 @@ int pwc_set_agc(struct pwc_device *pdev, int mode, int value) if (value > 0xffff) value = 0xffff; buf = (value >> 10) & 0x3F; - ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf)); } if (ret < 0) return ret; @@ -671,12 +713,14 @@ int pwc_get_agc(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; if (buf != 0) { /* fixed */ - ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; if (buf > 0x3F) @@ -684,7 +728,8 @@ int pwc_get_agc(struct pwc_device *pdev, int *value) *value = (buf << 10); } else { /* auto */ - ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; /* Gah... this value ranges from 0x00 ... 0x9F */ @@ -707,7 +752,8 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) else buf[0] = 0xff; /* fixed */ - ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf)); if (!mode && ret >= 0) { if (value < 0) @@ -726,7 +772,9 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) buf[0] = value >> 8; } - ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2); + ret = send_control_msg(pdev, + SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, + &buf, sizeof(buf)); } return ret; } @@ -737,7 +785,8 @@ int pwc_get_shutter_speed(struct pwc_device *pdev, int *value) unsigned char buf[2]; int ret; - ret = RecvControlMsg(GET_STATUS_CTL, READ_SHUTTER_FORMATTER, 2); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf[0] + (buf[1] << 8); @@ -764,7 +813,9 @@ int pwc_camera_power(struct pwc_device *pdev, int power) buf = 0x00; /* active */ else buf = 0xFF; /* power save */ - return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1); + return send_control_msg(pdev, + SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, + &buf, sizeof(buf)); } @@ -773,20 +824,20 @@ int pwc_camera_power(struct pwc_device *pdev, int power) int pwc_restore_user(struct pwc_device *pdev) { - char buf; /* dummy */ - return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0); + return send_control_msg(pdev, + SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0); } int pwc_save_user(struct pwc_device *pdev) { - char buf; /* dummy */ - return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0); + return send_control_msg(pdev, + SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0); } int pwc_restore_factory(struct pwc_device *pdev) { - char buf; /* dummy */ - return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0); + return send_control_msg(pdev, + SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0); } /* ************************************************* */ @@ -814,7 +865,8 @@ int pwc_set_awb(struct pwc_device *pdev, int mode) buf = mode & 0x07; /* just the lowest three bits */ - ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; @@ -826,7 +878,8 @@ int pwc_get_awb(struct pwc_device *pdev) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; @@ -843,7 +896,9 @@ int pwc_set_red_gain(struct pwc_device *pdev, int value) value = 0xffff; /* only the msb is considered */ buf = value >> 8; - return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, + &buf, sizeof(buf)); } int pwc_get_red_gain(struct pwc_device *pdev, int *value) @@ -851,7 +906,9 @@ int pwc_get_red_gain(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 8; @@ -869,7 +926,9 @@ int pwc_set_blue_gain(struct pwc_device *pdev, int value) value = 0xffff; /* only the msb is considered */ buf = value >> 8; - return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, + &buf, sizeof(buf)); } int pwc_get_blue_gain(struct pwc_device *pdev, int *value) @@ -877,7 +936,9 @@ int pwc_get_blue_gain(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 8; @@ -894,7 +955,8 @@ static int pwc_read_red_gain(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 8; @@ -906,7 +968,8 @@ static int pwc_read_blue_gain(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 8; @@ -920,7 +983,8 @@ static int pwc_set_wb_speed(struct pwc_device *pdev, int speed) /* useful range is 0x01..0x20 */ buf = speed / 0x7f0; - return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf)); } static int pwc_get_wb_speed(struct pwc_device *pdev, int *value) @@ -928,7 +992,8 @@ static int pwc_get_wb_speed(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf * 0x7f0; @@ -942,7 +1007,8 @@ static int pwc_set_wb_delay(struct pwc_device *pdev, int delay) /* useful range is 0x01..0x3F */ buf = (delay >> 10); - return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf)); } static int pwc_get_wb_delay(struct pwc_device *pdev, int *value) @@ -950,7 +1016,8 @@ static int pwc_get_wb_delay(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 10; @@ -978,7 +1045,8 @@ int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value) buf[0] = on_value; buf[1] = off_value; - return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2); + return send_control_msg(pdev, + SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf)); } static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) @@ -992,7 +1060,8 @@ static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) return 0; } - ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *on_value = buf[0] * 100; @@ -1009,7 +1078,8 @@ int pwc_set_contour(struct pwc_device *pdev, int contour) buf = 0xff; /* auto contour on */ else buf = 0x0; /* auto contour off */ - ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; @@ -1019,7 +1089,8 @@ int pwc_set_contour(struct pwc_device *pdev, int contour) contour = 0xffff; buf = (contour >> 10); /* contour preset is [0..3f] */ - ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; return 0; @@ -1030,13 +1101,16 @@ int pwc_get_contour(struct pwc_device *pdev, int *contour) unsigned char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; if (buf == 0) { /* auto mode off, query current preset value */ - ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *contour = buf << 10; @@ -1055,7 +1129,9 @@ int pwc_set_backlight(struct pwc_device *pdev, int backlight) buf = 0xff; else buf = 0x0; - return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, + &buf, sizeof(buf)); } int pwc_get_backlight(struct pwc_device *pdev, int *backlight) @@ -1063,7 +1139,9 @@ int pwc_get_backlight(struct pwc_device *pdev, int *backlight) int ret; unsigned char buf; - ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *backlight = !!buf; @@ -1078,7 +1156,8 @@ int pwc_set_colour_mode(struct pwc_device *pdev, int colour) buf = 0xff; else buf = 0x0; - return SendControlMsg(SET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf)); } int pwc_get_colour_mode(struct pwc_device *pdev, int *colour) @@ -1086,7 +1165,8 @@ int pwc_get_colour_mode(struct pwc_device *pdev, int *colour) int ret; unsigned char buf; - ret = RecvControlMsg(GET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *colour = !!buf; @@ -1102,7 +1182,8 @@ int pwc_set_flicker(struct pwc_device *pdev, int flicker) buf = 0xff; else buf = 0x0; - return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf)); } int pwc_get_flicker(struct pwc_device *pdev, int *flicker) @@ -1110,7 +1191,8 @@ int pwc_get_flicker(struct pwc_device *pdev, int *flicker) int ret; unsigned char buf; - ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *flicker = !!buf; @@ -1126,7 +1208,9 @@ int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise) if (noise > 3) noise = 3; buf = noise; - return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, + &buf, sizeof(buf)); } int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise) @@ -1134,7 +1218,9 @@ int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise) int ret; unsigned char buf; - ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *noise = buf; @@ -1146,7 +1232,8 @@ static int _pwc_mpt_reset(struct pwc_device *pdev, int flags) unsigned char buf; buf = flags & 0x03; // only lower two bits are currently used - return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1); + return send_control_msg(pdev, + SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, &buf, sizeof(buf)); } int pwc_mpt_reset(struct pwc_device *pdev, int flags) @@ -1175,7 +1262,8 @@ static int _pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) buf[1] = (pan >> 8) & 0xFF; buf[2] = tilt & 0xFF; buf[3] = (tilt >> 8) & 0xFF; - return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4); + return send_control_msg(pdev, + SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, &buf, sizeof(buf)); } int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) @@ -1211,7 +1299,8 @@ static int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *st int ret; unsigned char buf[5]; - ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5); + ret = recv_control_msg(pdev, + GET_MPT_CTL, PT_STATUS_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; status->status = buf[0] & 0x7; // 3 bits are used for reporting @@ -1233,7 +1322,8 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) else request = SENSOR_TYPE_FORMATTER2; - ret = RecvControlMsg(GET_STATUS_CTL, request, 1); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, request, &buf, sizeof(buf)); if (ret < 0) return ret; if (pdev->type < 675) -- cgit v0.10.2 From a5a0a630922a2f6a774b6dac19f70cb5abd86bb0 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 20 Apr 2009 21:34:18 -0700 Subject: ocfs2: Add missing iput() during error handling in ocfs2_dentry_attach_lock() In ocfs2_dentry_attach_lock(), if unable to get the dentry lock, we need to call iput(inode) because a failure here means no d_instantiate(), which means the normally matching iput() will not be called during dput(dentry). This patch fixes the oops that accompanies the following message: (3996,1):dlm_empty_lockres:2708 ERROR: lockres W00000000000000000a1046b06a4382 still has local locks! kernel BUG in dlm_empty_lockres at /rpmbuild/smushran/BUILD/ocfs2-1.4.2/fs/ocfs2/dlm/dlmmaster.c:2709! Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c index 7d60448..b574431 100644 --- a/fs/ocfs2/dcache.c +++ b/fs/ocfs2/dcache.c @@ -290,6 +290,21 @@ out_attach: else mlog_errno(ret); + /* + * In case of error, manually free the allocation and do the iput(). + * We need to do this because error here means no d_instantiate(), + * which means iput() will not be called during dput(dentry). + */ + if (ret < 0 && !alias) { + ocfs2_lock_res_free(&dl->dl_lockres); + BUG_ON(dl->dl_count != 1); + spin_lock(&dentry_attach_lock); + dentry->d_fsdata = NULL; + spin_unlock(&dentry_attach_lock); + kfree(dl); + iput(inode); + } + dput(alias); return ret; -- cgit v0.10.2 From ae1036a2f4e8f83b544ddce4f875a1e4e2ac7b62 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 20 Apr 2009 17:48:28 +0100 Subject: [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config Check if we really have Scoop config, otherwice we can get a nice Oops during probe. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Russell King diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index 1cd02f5..bc43f78 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -255,6 +255,9 @@ static int __init sharpsl_pcmcia_init(void) { int ret; + if (!platform_scoop_config) + return -ENODEV; + sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs; sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); -- cgit v0.10.2 From fdd8b079e33d4711527ace19798e9db99a056469 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 22 Apr 2009 20:08:17 +0100 Subject: [ARM] 5460/1: Orion: reduce namespace pollution Symbols like SOFT_RESET are way too generic to be exported at large. To avoid this, let's move the mbus bridge register defines into a separate file and include it where needed. This affects mach-kirkwood, mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all share code in plat-orion which relies on those defines. Some other defines have been moved to narrower scopes, or simply deleted when they had no user. This fixes compilation problem with mpt2sas on the above listed platforms. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 16dc9ea..eeb0024 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h new file mode 100644 index 0000000..4f7029f --- /dev/null +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -0,0 +1,42 @@ +/* + * arch/arm/mach-kirkwood/include/mach/bridge-regs.h + * + * Mbus-L to Mbus Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_RESET 0x00000002 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_LOW_OFF 0x0000 +#define IRQ_MASK_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_WRITETHROUGH 0x00000010 + +#endif diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index c0cc5b5..a4a55c1 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -6,7 +6,7 @@ * published by the Free Software Foundation. */ -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S index 83e0cba..8939d36 100644 --- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 38c9868..b3e1395 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -44,44 +44,6 @@ #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M /* - * MBUS bridge registers. - */ -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -/* - * Supported devices and revisions. - */ -#define MV88F6281_DEV_ID 0x6281 -#define MV88F6281_REV_Z0 0 -#define MV88F6281_REV_A0 2 - -#define MV88F6192_DEV_ID 0x6192 -#define MV88F6192_REV_Z0 0 -#define MV88F6192_REV_A0 2 - -#define MV88F6180_DEV_ID 0x6180 -#define MV88F6180_REV_A0 2 - -/* * Register Map */ #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) @@ -99,6 +61,8 @@ #define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) + #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -119,5 +83,18 @@ #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) +/* + * Supported devices and revisions. + */ +#define MV88F6281_DEV_ID 0x6281 +#define MV88F6281_REV_Z0 0 +#define MV88F6281_REV_A0 2 + +#define MV88F6192_DEV_ID 0x6192 +#define MV88F6192_REV_Z0 0 +#define MV88F6192_REV_A0 2 + +#define MV88F6180_DEV_ID 0x6180 +#define MV88F6180_REV_A0 2 #endif diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h index 23a1914..7568e95 100644 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ b/arch/arm/mach-kirkwood/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 06083b2..28020ab 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include "common.h" diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c index 0332d8f..b9537c9 100644 --- a/arch/arm/mach-loki/addr-map.c +++ b/arch/arm/mach-loki/addr-map.c @@ -38,6 +38,7 @@ /* * CPU Address Decode Windows registers */ +#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h new file mode 100644 index 0000000..a3fabf7 --- /dev/null +++ b/arch/arm/mach-loki/include/mach/bridge-regs.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-loki/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) + +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR 0x0004 + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_OFF 0x0000 +#define IRQ_MASK_OFF 0x0004 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S index 332af38..bc917ed 100644 --- a/arch/arm/mach-loki/include/mach/entry-macro.S +++ b/arch/arm/mach-loki/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h index c00af6b..bfca7c2 100644 --- a/arch/arm/mach-loki/include/mach/loki.h +++ b/arch/arm/mach-loki/include/mach/loki.h @@ -58,20 +58,6 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR 0x0004 -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_OFF 0x0000 -#define IRQ_MASK_OFF 0x0004 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) #define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h index c1de36f..7189519 100644 --- a/arch/arm/mach-loki/include/mach/system.h +++ b/arch/arm/mach-loki/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c index e1f9733..76b211b 100644 --- a/arch/arm/mach-loki/irq.c +++ b/arch/arm/mach-loki/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include "common.h" diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index a575daa..9ba5950 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h new file mode 100644 index 0000000..2d14c4f --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define L2_WRITETHROUGH 0x00020000 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_ERR_OFF 0x0000 +#define IRQ_CAUSE_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0008 +#define IRQ_MASK_ERR_OFF 0x000c +#define IRQ_MASK_LOW_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S index fbfb269..66ae2d2 100644 --- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 582cffc..d715b92 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -59,37 +59,6 @@ * Core-specific peripheral registers. */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define L2_WRITETHROUGH 0x00020000 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_ERR_OFF 0x0000 -#define IRQ_CAUSE_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0008 -#define IRQ_MASK_ERR_OFF 0x000c -#define IRQ_MASK_LOW_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -/* - * Supported devices and revisions. - */ -#define MV78X00_Z0_DEV_ID 0x6381 -#define MV78X00_REV_Z0 1 - -#define MV78100_DEV_ID 0x7810 -#define MV78100_REV_A0 1 - -#define MV78200_DEV_ID 0x7820 -#define MV78200_REV_A0 1 /* * Register Map @@ -135,5 +104,16 @@ #define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) +/* + * Supported devices and revisions. + */ +#define MV78X00_Z0_DEV_ID 0x6381 +#define MV78X00_REV_Z0 1 + +#define MV78100_DEV_ID 0x7810 +#define MV78100_REV_A0 1 + +#define MV78200_DEV_ID 0x7820 +#define MV78200_REV_A0 1 #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h index 1d6350b..66e7ce4 100644 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ b/arch/arm/mach-mv78xx0/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 30b7e4b..f289b0e 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include "common.h" diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 719957e..c14d121 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -57,12 +57,14 @@ /* * Helpers to get DDR bank info */ +#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3)) #define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3)) /* * CPU Address Decode Windows registers */ +#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h new file mode 100644 index 0000000..be896e5 --- /dev/null +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-orion5x/include/mach/bridge-regs.h + * + * Orion CPU Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100) + +#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) + +#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define WDT_RESET 0x0002 + +#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) + +#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C) + +#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) +#define WDT_INT_REQ 0x0008 + +#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200) + +#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) + +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) + +#endif diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S index 4351937..d658992 100644 --- a/arch/arm/mach-orion5x/include/mach/entry-macro.S +++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 67bda31..377a773 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -61,30 +61,10 @@ #define ORION5X_PCI_MEM_SIZE SZ_128M /******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -#define MV88F5181L_REV_A0 8 -#define MV88F5181L_REV_A1 9 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D0 4 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 -/* Orion-1-90 (88F6183) */ -#define MV88F6183_DEV_ID 0x6183 -#define MV88F6183_REV_B0 3 - -/******************************************************************************* * Orion Registers Map ******************************************************************************/ + #define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) @@ -97,34 +77,25 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) -#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) #define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) #define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) -#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) #define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900) #define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900) -#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x)) #define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) #define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) -#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) #define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) #define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) -#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) #define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) #define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) -#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) /******************************************************************************* * Device Bus Registers @@ -142,23 +113,24 @@ #define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) #define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION5X_BRIDGE_REG(0x100) -#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) -#define WDT_RESET 0x0002 -#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) -#define WDT_INT_REQ 0x0008 -#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) - +/******************************************************************************* + * Supported Devices & Revisions + ******************************************************************************/ +/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +#define MV88F5181L_REV_A0 8 +#define MV88F5181L_REV_A1 9 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D0 4 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 +/* Orion-1-90 (88F6183) */ +#define MV88F6183_DEV_ID 0x6183 +#define MV88F6183_REV_B0 3 #endif diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index 9b8db1d..e912490 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -11,8 +11,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index e03f7b4..d7512b9 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include "common.h" diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 68acca9..41e6d50 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index d0a785a..36dc541 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -196,6 +196,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /***************************************************************************** * PCI controller ****************************************************************************/ +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define PCI_MODE ORION5X_PCI_REG(0xd00) #define PCI_CMD ORION5X_PCI_REG(0xc00) #define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 6fa2923..bdeb166 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include /* * Number of timer ticks per jiffy. diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c index 7529616..2cde568 100644 --- a/drivers/watchdog/orion5x_wdt.c +++ b/drivers/watchdog/orion5x_wdt.c @@ -22,6 +22,7 @@ #include #include #include +#include #include /* -- cgit v0.10.2 From f461ddea0af8b98e2b7940eba9c693b0ee44d64a Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 23 Apr 2009 18:59:43 -0400 Subject: ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M Linux tells ICH4 users that they can (manually) invoke "hpet=force" to enable the undocumented ICH-4M HPET. The HPET becomes available for both clocksource and clockevents. But as of ff69f2bba67bd45514923aaedbf40fe351787c59 (acpi: fix of pmtimer overflow that make Cx states time incorrect) the HPET may be used via clocksource for idle accounting, and hpet=force on an ICH4 box hangs boot. It turns out that touching the MMIO HPET withing the ARB_DIS part of C3 will hang the hardware. The fix is to simply move the timer access outside the ARB_DIS region. This is a no-op on modern hardware because ARB_DIS is no longer used. http://bugzilla.kernel.org/show_bug.cgi?id=13087 Acked-by: Venkatesh Pallipadi Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6fe1214..ea23c64 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -955,6 +955,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, */ acpi_state_timer_broadcast(pr, cx, 1); + kt1 = ktime_get_real(); /* * disable bus master * bm_check implies we need ARB_DIS @@ -976,10 +977,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, ACPI_FLUSH_CPU_CACHE(); } - kt1 = ktime_get_real(); acpi_idle_do_entry(cx); - kt2 = ktime_get_real(); - idle_time = ktime_to_us(ktime_sub(kt2, kt1)); /* Re-enable bus master arbitration */ if (pr->flags.bm_check && pr->flags.bm_control) { @@ -988,6 +986,8 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, c3_cpu_count--; spin_unlock(&c3_lock); } + kt2 = ktime_get_real(); + idle_time = ktime_to_us(ktime_sub(kt2, kt1)); #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC could halt in idle, so notify users */ -- cgit v0.10.2 From b75d17285b9de74a0f19e64e1389efcc6626d3fc Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 23 Apr 2009 19:25:51 -0700 Subject: Input: ALPS - add signature for Toshiba Satellite Pro M10 This toshiba has a touchpad with trackpoint and 2 sets of left and right buttons (above and below touchpad). Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index cbedf95..daecc75 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -37,6 +37,7 @@ #define ALPS_FW_BK_2 0x40 static const struct alps_model_info alps_model_data[] = { + { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ { { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */ { { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, -- cgit v0.10.2 From 15ca78f7925899fee7bc265651a69ab51f449eea Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 23 Apr 2009 21:11:06 -0600 Subject: OMAP2xxx clock: fix broken cpu_mask code Commit 8ad8ff6548f1c0bcbeaa02f274b3927c5015a921 breaks the OMAP2xxx cpu_mask code, which causes OMAP2xxx to panic on boot. Fix by removing the cpu_mask auto variable and by changing CK_242X and CK_243X to use RATE_IN_242X/RATE_IN_243X. Resolves <1>Unable to handle kernel NULL pointer dereference at virtual address 0000000c <1>pgd = c0004000 <1>[0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] Modules linked in: CPU: 0 Not tainted (2.6.29-omap1 #32) PC is at omap2_clk_set_parent+0x104/0x120 LR is at omap2_clk_set_parent+0x28/0x120 Signed-off-by: Paul Walmsley Tested-by: Jarkko Nikula Cc: Russell King diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 984fb86..5ea4183 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -60,8 +60,8 @@ struct omap_clk { }, \ } -#define CK_243X (1 << 0) -#define CK_242X (1 << 1) +#define CK_243X RATE_IN_243X +#define CK_242X RATE_IN_242X static struct omap_clk omap24xx_clks[] = { /* external root sources */ @@ -711,7 +711,7 @@ int __init omap2_clk_init(void) { struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate, cpu_mask; + u32 clkrate; if (cpu_is_omap242x()) cpu_mask = RATE_IN_242X; @@ -728,12 +728,6 @@ int __init omap2_clk_init(void) sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); - cpu_mask = 0; - if (cpu_is_omap2420()) - cpu_mask |= CK_242X; - if (cpu_is_omap2430()) - cpu_mask |= CK_243X; - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) if (c->cpu & cpu_mask) { clkdev_add(&c->lk); -- cgit v0.10.2 From 9e53dd7180a1fd59a785dbfb9c633f01c96c388f Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Thu, 23 Apr 2009 21:11:07 -0600 Subject: OMAP3: clock: Camera module doesn't have IDLEST bit This patch avoids waiting for the camera module to become ready, since it doesn't have IDLEST bit. Based on a earlier hack done by Paul Walmsley on Sep 9 2008 on linux-omap tree. Signed-off-by: Sergio Aguirre Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 70ec10d..f009017 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2052,7 +2052,7 @@ static struct clk dss_ick = { static struct clk cam_mclk = { .name = "cam_mclk", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll4_m5x2_ck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, @@ -2063,7 +2063,7 @@ static struct clk cam_mclk = { static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2074,7 +2074,7 @@ static struct clk cam_ick = { static struct clk csi2_96m_fck = { .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &core_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), -- cgit v0.10.2 From d53eb73795c55101453ea6ca4f486ea2ff7b0496 Mon Sep 17 00:00:00 2001 From: Arun KS Date: Thu, 23 Apr 2009 21:11:07 -0600 Subject: OMAP1: clock: Typo fix for clock in omap1 Typo error when requesting for clock for dsp in omap1 Signed-off-by: Arun KS Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index d040c3f..a2d7814 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id) */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (dsp_use++ == 0) { - api_clk = clk_get(NULL, "api_clk"); - dsp_clk = clk_get(NULL, "dsp_clk"); + api_clk = clk_get(NULL, "api_ck"); + dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { clk_enable(api_clk); clk_enable(dsp_clk); -- cgit v0.10.2 From 9198a40620fc69d577e854fb571e76af3313bc53 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 23 Apr 2009 21:11:08 -0600 Subject: OMAP3 GPTIMER: fix GPTIMER12 IRQ GPTIMER12 IRQ is at IRQ 95 on OMAP3, unlike OMAP2. (ref: OMAP34xx Multimedia High Security (HS) Device Silicon Revision 3.0 Security Addendum Rev. B, SWPU119B) Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index bfd4757..c99d611 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_timers[] = { { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, + { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ }, }; static const char *omap3_dm_source_names[] __initdata = { -- cgit v0.10.2 From 219c5b98d5eb86c75abc716087f494fe06c6b64e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 23 Apr 2009 21:11:08 -0600 Subject: OMAP: dmtimer: enable all timers to be wakeup events All GP timers on OMAP2/3 can generate wakeup events. The wakeup status is cleared in the PRCM interrupt handler. Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index c99d611..a05205c 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ /* - * Enable wake-up only for GPT1 on OMAP2 CPUs. - * FIXME: All timers should have wake-up enabled and clear - * PRCM status. + * Enable wake-up on OMAP2 CPUs. */ - if (cpu_class_is_omap2() && (timer == &dm_timers[0])) + if (cpu_class_is_omap2()) l |= 1 << 2; omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); -- cgit v0.10.2 From f248076c0dad45b7e50f27096e1aac6a617665db Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 23 Apr 2009 21:11:10 -0600 Subject: OMAP2/3 GPTIMER: allow system tick GPTIMER to be changed in board-*.c files Add a function omap2_gp_clockevent_set_gptimer() for board-*.c files to use in .init_irq functions to configure the system tick GPTIMER. Practical choices at this point are GPTIMER1 or GPTIMER12. Both of these timers are in the WKUP powerdomain, and so are unaffected by chip power management. GPTIMER1 can use sys_clk as a source, for applications where a high-resolution timer is more important than power management. GPTIMER12 has the special property that it has the secure 32kHz oscillator as its source clock, which may be less prone to glitches than the off-chip 32kHz oscillator. But on HS devices, it may not be available for Linux use. It appears that most boards are fine with GPTIMER1, but BeagleBoard should use GPTIMER12 when using a 32KiHz timer source, due to hardware bugs in revisions B4 and below. Modify board-omap3beagle.c to use GPTIMER12. This patch originally used a Kbuild config option to select the GPTIMER, but was changed to allow this to be specified in board-*.c files, per Tony's request. Kalle Vallo found a bug in an earlier version of this patch - thanks Kalle. Tested on Beagle rev B4 ES2.1, with and without CONFIG_OMAP_32K_TIMER, and 3430SDP. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Cc: Kalle Valo diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 744740a..3a7a29d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "mmc-twl4030.h" @@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void) { omap2_init_common_hw(NULL); omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 5ea4183..efc59c4 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -66,6 +66,7 @@ struct omap_clk { static struct omap_clk omap24xx_clks[] = { /* external root sources */ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 33c3e5b..88c5acb 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -625,6 +625,14 @@ static struct clk func_32k_ck = { .clkdm_name = "wkup_clkdm", }; +static struct clk secure_32k_ck = { + .name = "secure_32k_ck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, + .clkdm_name = "wkup_clkdm", +}; + /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", @@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_omap2_dflt_wait, - .parent = &func_32k_ck, + .parent = &secure_32k_ck, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index f009017..6763b8f 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = { /* SECURE_32K_FCK clocks */ -/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 9fc13a2..7835048 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -3,6 +3,8 @@ * * OMAP2 GP timer support. * + * Copyright (C) 2009 Nokia Corporation + * * Update to use new clocksource/clockevent layers * Author: Kevin Hilman, MontaVista Software, Inc. * Copyright (C) 2007 MontaVista Software, Inc. @@ -36,8 +38,13 @@ #include #include +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 + static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; +static u8 __initdata gptimer_id = 1; +static u8 __initdata inited; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +/** + * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents + * @id: GPTIMER to use (1..MAX_GPTIMER_ID) + * + * Define the GPTIMER that the system should use for the tick timer. + * Meant to be called from board-*.c files in the event that GPTIMER1, the + * default, is unsuitable. Returns -EINVAL on error or 0 on success. + */ +int __init omap2_gp_clockevent_set_gptimer(u8 id) +{ + if (id < 1 || id > MAX_GPTIMER_ID) + return -EINVAL; + + BUG_ON(inited); + + gptimer_id = id; + + return 0; +} + static void __init omap2_gp_clockevent_init(void) { u32 tick_rate; + int src; + + inited = 1; - gptimer = omap_dm_timer_request_specific(1); + gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); #if defined(CONFIG_OMAP_32K_TIMER) - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); + src = OMAP_TIMER_SRC_32_KHZ; #else - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); + src = OMAP_TIMER_SRC_SYS_CLK; + WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " + "secure 32KiHz clock source\n"); #endif + + if (gptimer_id != 12) + WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), + "timer-gp: omap_dm_timer_set_source() failed\n"); + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", + gptimer_id, tick_rate); + omap2_gp_timer_irq.dev_id = (void *)gptimer; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); @@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void) clockevents_register_device(&clockevent_gpt); } +/* Clocksource code */ + #ifdef CONFIG_OMAP_32K_TIMER /* * When 32k-timer is enabled, don't use GPTimer for clocksource diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index a05205c..55bb996 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -509,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); #ifdef CONFIG_ARCH_OMAP1 -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int n = (timer - dm_timers) << 1; u32 l; @@ -517,23 +517,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; omap_writel(l, MOD_CONF_CTRL_1); + + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #else -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { + int ret = -EINVAL; + if (source < 0 || source >= 3) - return; + return -EINVAL; clk_disable(timer->fclk); - clk_set_parent(timer->fclk, dm_source_clocks[source]); + ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); clk_enable(timer->fclk); - /* When the functional clock disappears, too quick writes seem to - * cause an abort. */ + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ __delay(150000); + + return ret; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h index 6dc70313..20f1054 100644 --- a/arch/arm/plat-omap/include/mach/dmtimer.h +++ b/arch/arm/plat-omap/include/mach/dmtimer.h @@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer); void omap_dm_timer_start(struct omap_dm_timer *timer); void omap_dm_timer_stop(struct omap_dm_timer *timer); -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h new file mode 100644 index 0000000..c88d346 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/timer-gp.h @@ -0,0 +1,17 @@ +/* + * OMAP2/3 GPTIMER support.headers + * + * Copyright (C) 2009 Nokia Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H + +int __init omap2_gp_clockevent_set_gptimer(u8 id); + +#endif + -- cgit v0.10.2 From 615dfd93e2346b604232b559e7ea0835d24abe26 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 23 Apr 2009 23:21:29 -0400 Subject: ACPI: prevent processor.max_cstate=0 boot crash As processor.max_cstate is an init-time-only modparam, sanity checking it at init-time is sufficient. http://bugzilla.kernel.org/show_bug.cgi?id=13142 Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6fe1214..436127e 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1037,6 +1037,9 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) dev->states[i].desc[0] = '\0'; } + if (max_cstate == 0) + max_cstate = 1; + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { cx = &pr->power.states[i]; state = &dev->states[count]; -- cgit v0.10.2 From 226fced325e2865369cbeac41c6a97536d4daa1b Mon Sep 17 00:00:00 2001 From: "Almer S. Tigelaar" Date: Sun, 12 Apr 2009 11:26:26 +0000 Subject: sony-laptop: Duplicate SNC 127 Event Fix Fixes a duplicate mapping in the SNC sony_127_events structure. Signed-off-by: Almer S. Tigelaar Signed-off-by: Mattia Dongili Signed-off-by: Len Brown diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index d3c92d7..87080d0 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -905,7 +905,6 @@ static struct sony_nc_event sony_127_events[] = { { 0x05, SONYPI_EVENT_ANYBUTTON_RELEASED }, { 0x86, SONYPI_EVENT_PKEY_P5 }, { 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED }, - { 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED }, { 0x87, SONYPI_EVENT_SETTINGKEY_PRESSED }, { 0x07, SONYPI_EVENT_ANYBUTTON_RELEASED }, { 0, 0 }, -- cgit v0.10.2 From 560e84ac1b92d2a704fbfda29b46ad1b0a8d457e Mon Sep 17 00:00:00 2001 From: "Almer S. Tigelaar" Date: Sun, 12 Apr 2009 11:26:27 +0000 Subject: sony-laptop: SNC 127 Initialization Fix Fixes additional special key initialization for SNC 127 key events. Verified / tested on a Sony VAIO SR model. Signed-off-by: Almer S. Tigelaar Signed-off-by: Mattia Dongili Signed-off-by: Len Brown diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 87080d0..4ff41a7 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1003,6 +1003,7 @@ static int sony_nc_function_setup(struct acpi_device *device) sony_call_snc_handle(0x0100, 0, &result); sony_call_snc_handle(0x0101, 0, &result); sony_call_snc_handle(0x0102, 0x100, &result); + sony_call_snc_handle(0x0127, 0, &result); return 0; } -- cgit v0.10.2 From a83021a229016f93b4e532d9cef21b01be5a8bb7 Mon Sep 17 00:00:00 2001 From: "Almer S. Tigelaar" Date: Sun, 12 Apr 2009 11:26:28 +0000 Subject: sony-laptop: SNC input event 38 fix Fixes the "unknown input event 38" messages. ANYBUTTON_RELEASED is now treated the same way as FN_KEY_RELEASED. Signed-off-by: Almer S. Tigelaar Signed-off-by: Mattia Dongili Signed-off-by: Len Brown diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 4ff41a7..3541ca0 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -317,7 +317,8 @@ static void sony_laptop_report_input_event(u8 event) struct input_dev *key_dev = sony_laptop_input.key_dev; struct sony_laptop_keypress kp = { NULL }; - if (event == SONYPI_EVENT_FNKEY_RELEASED) { + if (event == SONYPI_EVENT_FNKEY_RELEASED || + event == SONYPI_EVENT_ANYBUTTON_RELEASED) { /* Nothing, not all VAIOs generate this event */ return; } -- cgit v0.10.2 From 5aa63f038f042fd1acd6e720a95df72857db0bc7 Mon Sep 17 00:00:00 2001 From: "Almer S. Tigelaar" Date: Sun, 12 Apr 2009 11:26:29 +0000 Subject: ACPI: EC: Fix ACPI EC resume non-query interrupt message When resuming from standby (on a laptop) I see the following message in my kernel.log: "ACPI: EC: non-query interrupt received, switching to interrupt mode" This apparently prevented sony-laptop to properly restore the brightness level on resume. The cause: In drivers/acpi/ec.c the acpi_ec_suspend function clears the GPE mode bit, but this is not restored in acpi_ec_resume (the function below it). The patch below fixes this by properly restoring the GPE_MODE bit. Tested and confirmed to work. Signed-off-by: Almer S. Tigelaar Signed-off-by: Mattia Dongili Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 04e9044..391f331 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1065,6 +1065,7 @@ static int acpi_ec_resume(struct acpi_device *device) struct acpi_ec *ec = acpi_driver_data(device); /* Enable use of GPE back */ clear_bit(EC_FLAGS_NO_GPE, &ec->flags); + set_bit(EC_FLAGS_GPE_MODE, &ec->flags); acpi_enable_gpe(NULL, ec->gpe); return 0; } -- cgit v0.10.2 From c35d4b3532ed3e2076fb14c25385cf6cef41cc69 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Sun, 12 Apr 2009 11:26:30 +0000 Subject: sony-laptop: fix bogus error message display on resume sony_backlight_update_status returns 0 on success -1 on failure (i.e.: the return value from acpi_callsetfunc. The return value in the resume path was broken and thus always displaying a bogus warning about not being able to restore the brightness level. Signed-off-by: Mattia Dongili Signed-off-by: Len Brown diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 3541ca0..d93cff6 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1041,7 +1041,7 @@ static int sony_nc_resume(struct acpi_device *device) /* set the last requested brightness level */ if (sony_backlight_device && - !sony_backlight_update_status(sony_backlight_device)) + sony_backlight_update_status(sony_backlight_device) < 0) printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n"); return 0; -- cgit v0.10.2 From 53005a0a1b53bda5810c45efe3025d1884aa6bb3 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Sun, 12 Apr 2009 11:26:31 +0000 Subject: sony-laptop: always try to unblock rfkill on load This fixes an inconsistent behaviour when loading the driver with the switch on or off. In the former case you would also need to soft unblock the switch via the sysfs file entries to really disable rfkill, in the latter you wouldn't. Signed-off-by: Mattia Dongili Cc: Matthias Welwarsky Acked-by: Matthew Garrett Signed-off-by: Len Brown diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index d93cff6..5529585 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1103,8 +1103,11 @@ static int sony_nc_setup_wifi_rfkill(struct acpi_device *device) err = rfkill_register(sony_wifi_rfkill); if (err) rfkill_free(sony_wifi_rfkill); - else + else { sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill; + sony_nc_rfkill_set(sony_wifi_rfkill->data, + RFKILL_STATE_UNBLOCKED); + } return err; } @@ -1125,8 +1128,11 @@ static int sony_nc_setup_bluetooth_rfkill(struct acpi_device *device) err = rfkill_register(sony_bluetooth_rfkill); if (err) rfkill_free(sony_bluetooth_rfkill); - else + else { sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill; + sony_nc_rfkill_set(sony_bluetooth_rfkill->data, + RFKILL_STATE_UNBLOCKED); + } return err; } @@ -1146,8 +1152,11 @@ static int sony_nc_setup_wwan_rfkill(struct acpi_device *device) err = rfkill_register(sony_wwan_rfkill); if (err) rfkill_free(sony_wwan_rfkill); - else + else { sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill; + sony_nc_rfkill_set(sony_wwan_rfkill->data, + RFKILL_STATE_UNBLOCKED); + } return err; } @@ -1167,8 +1176,11 @@ static int sony_nc_setup_wimax_rfkill(struct acpi_device *device) err = rfkill_register(sony_wimax_rfkill); if (err) rfkill_free(sony_wimax_rfkill); - else + else { sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill; + sony_nc_rfkill_set(sony_wimax_rfkill->data, + RFKILL_STATE_UNBLOCKED); + } return err; } -- cgit v0.10.2 From a65131e942e25c707a652fa4ec2cfcd8b63fec11 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 16 Apr 2009 15:18:16 +0800 Subject: I/O port protection: update for windows compatibility. For windows compatibility, 1) On a port protection violation, simply ignore the request and do not return an exception (allow the control method to continue execution.) 2) If only part of the request overlaps a protected port, read/write the individual ports that are not protected. http://bugzilla.kernel.org/show_bug.cgi?id=13036 Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c index 7737afb..9c83457 100644 --- a/drivers/acpi/acpica/hwvalid.c +++ b/drivers/acpi/acpica/hwvalid.c @@ -151,7 +151,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) ACPI_ERROR((AE_INFO, "Illegal I/O port address/length above 64K: 0x%p/%X", ACPI_CAST_PTR(void, address), byte_width)); - return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS); + return_ACPI_STATUS(AE_LIMIT); } /* Exit if requested address is not within the protected port table */ @@ -178,11 +178,12 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) /* Port illegality may depend on the _OSI calls made by the BIOS */ if (acpi_gbl_osi_data >= port_info->osi_dependency) { - ACPI_ERROR((AE_INFO, - "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)", - ACPI_CAST_PTR(void, address), - byte_width, port_info->name, - port_info->start, port_info->end)); + ACPI_DEBUG_PRINT((ACPI_DB_IO, + "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)", + ACPI_CAST_PTR(void, address), + byte_width, port_info->name, + port_info->start, + port_info->end)); return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS); } @@ -206,7 +207,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) * Value Where value is placed * Width Number of bits * - * RETURN: Value read from port + * RETURN: Status and value read from port * * DESCRIPTION: Read data from an I/O port or register. This is a front-end * to acpi_os_read_port that performs validation on both the port @@ -217,14 +218,43 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) { acpi_status status; + u32 one_byte; + u32 i; + + /* Validate the entire request and perform the I/O */ status = acpi_hw_validate_io_request(address, width); - if (ACPI_FAILURE(status)) { + if (ACPI_SUCCESS(status)) { + status = acpi_os_read_port(address, value, width); return status; } - status = acpi_os_read_port(address, value, width); - return status; + if (status != AE_AML_ILLEGAL_ADDRESS) { + return status; + } + + /* + * There has been a protection violation within the request. Fall + * back to byte granularity port I/O and ignore the failing bytes. + * This provides Windows compatibility. + */ + for (i = 0, *value = 0; i < width; i += 8) { + + /* Validate and read one byte */ + + if (acpi_hw_validate_io_request(address, 8) == AE_OK) { + status = acpi_os_read_port(address, &one_byte, 8); + if (ACPI_FAILURE(status)) { + return status; + } + + *value |= (one_byte << i); + } + + address++; + } + + return AE_OK; } /****************************************************************************** @@ -235,7 +265,7 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) * Value Value to write * Width Number of bits * - * RETURN: None + * RETURN: Status * * DESCRIPTION: Write data to an I/O port or register. This is a front-end * to acpi_os_write_port that performs validation on both the port @@ -246,12 +276,39 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width) { acpi_status status; + u32 i; + + /* Validate the entire request and perform the I/O */ status = acpi_hw_validate_io_request(address, width); - if (ACPI_FAILURE(status)) { + if (ACPI_SUCCESS(status)) { + status = acpi_os_write_port(address, value, width); return status; } - status = acpi_os_write_port(address, value, width); - return status; + if (status != AE_AML_ILLEGAL_ADDRESS) { + return status; + } + + /* + * There has been a protection violation within the request. Fall + * back to byte granularity port I/O and ignore the failing bytes. + * This provides Windows compatibility. + */ + for (i = 0; i < width; i += 8) { + + /* Validate and write one byte */ + + if (acpi_hw_validate_io_request(address, 8) == AE_OK) { + status = + acpi_os_write_port(address, (value >> i) & 0xFF, 8); + if (ACPI_FAILURE(status)) { + return status; + } + } + + address++; + } + + return AE_OK; } -- cgit v0.10.2 From a38d75fa2e48d4960b656eac39bc8a6b584a83c0 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 24 Apr 2009 00:32:52 -0400 Subject: Revert "ACPICA: delete check for AML access to port 0x81-83" This reverts commit fdbdc7fc79c02ae4ede869d514179a2c65633d28. That temporary quick-fix is no longer necessary, as the previous patch, a65131e942e25c707a652fa4ec2cfcd8b63fec11, "I/O port protection: update for windows compatibility" should handle this issue for all ports, including this one. Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c index 9c83457..ec33f27 100644 --- a/drivers/acpi/acpica/hwvalid.c +++ b/drivers/acpi/acpica/hwvalid.c @@ -90,6 +90,7 @@ static const struct acpi_port_info acpi_protected_ports[] = { {"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP}, {"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP}, {"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP}, + {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP}, {"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP}, {"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP}, {"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP}, -- cgit v0.10.2 From b7f0ab460f772b09a9c664d746236a280fec714c Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 15 Apr 2009 21:46:36 +0100 Subject: ACPI, i915: Register ACPI video even when not modesetting The ACPI video driver defers registration to the i915 driver if the system supports opregion-mediated backlight control. This registration was only being performed in the KMS case. Ensure it's done even if we don't have modesetting enabled. http://bugzilla.kernel.org/show_bug.cgi?id=13048 Signed-off-by: Matthew Garrett Signed-off-by: Len Brown diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c index 6942772..8dc1fd3 100644 --- a/drivers/gpu/drm/i915/i915_opregion.c +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -370,11 +370,8 @@ int intel_opregion_init(struct drm_device *dev, int resume) if (mboxes & MBOX_ACPI) { DRM_DEBUG("Public ACPI methods supported\n"); opregion->acpi = base + OPREGION_ACPI_OFFSET; - if (drm_core_check_feature(dev, DRIVER_MODESET)) { + if (drm_core_check_feature(dev, DRIVER_MODESET)) intel_didl_outputs(dev); - if (!resume) - acpi_video_register(); - } } else { DRM_DEBUG("Public ACPI methods not supported\n"); err = -ENOTSUPP; @@ -391,6 +388,10 @@ int intel_opregion_init(struct drm_device *dev, int resume) opregion->asle = base + OPREGION_ASLE_OFFSET; } + if (!resume) + acpi_video_register(); + + /* Notify BIOS we are ready to handle ACPI video ext notifs. * Right now, all the events are handled by the ACPI video module. * We don't actually need to do anything with them. */ -- cgit v0.10.2 From e8a1344119f3787b822d110336e5dd33f6ffca70 Mon Sep 17 00:00:00 2001 From: Maciej Cencora Date: Fri, 17 Apr 2009 15:55:09 +0200 Subject: drm/radeon: bump minor version for occlusion queries support We already added support, just need to let userspace know when it can use them. Signed-off-by: Maciej Cencora Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index ed4d27e..8071d96 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -99,9 +99,10 @@ * 1.27- Add support for IGP GART * 1.28- Add support for VBL on CRTC2 * 1.29- R500 3D cmd buffer support + * 1.30- Add support for occlusion queries */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 29 +#define DRIVER_MINOR 30 #define DRIVER_PATCHLEVEL 0 /* -- cgit v0.10.2 From c964b129425c98cb37da365e772bdbe5281f3a05 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 22 Apr 2009 18:32:56 +1000 Subject: drm/kms: don't try to shortcut drm mode set function We have a drm_set_config which takes a crtc/encoder/mode setup, and checks it to see if it can shortcut and just do a base setup, or whether a complete mode setting is required. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index a04639d..4589044 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -561,7 +561,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, int saved_x, saved_y; struct drm_encoder *encoder; bool ret = true; - bool depth_changed, bpp_changed; adjusted_mode = drm_mode_duplicate(dev, mode); @@ -570,15 +569,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (!crtc->enabled) return true; - if (old_fb && crtc->fb) { - depth_changed = (old_fb->depth != crtc->fb->depth); - bpp_changed = (old_fb->bits_per_pixel != - crtc->fb->bits_per_pixel); - } else { - depth_changed = true; - bpp_changed = true; - } - saved_mode = crtc->mode; saved_x = crtc->x; saved_y = crtc->y; @@ -590,15 +580,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, crtc->x = x; crtc->y = y; - if (drm_mode_equal(&saved_mode, &crtc->mode)) { - if (saved_x != crtc->x || saved_y != crtc->y || - depth_changed || bpp_changed) { - ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, - old_fb); - goto done; - } - } - /* Pass our mode to the connectors and the CRTC to give them a chance to * adjust it according to limitations or connector properties, and also * a chance to reject the mode entirely. -- cgit v0.10.2 From 59738d5c974d81b566cb53c203f5db268b7b3545 Mon Sep 17 00:00:00 2001 From: Jonas Bonn Date: Fri, 24 Apr 2009 15:05:02 +1000 Subject: drm: add control node checks missing from kms merge This line that checks the DRM_CONTROL_ALLOW flag was missed from the KMS merge. Re-add the check on the IOCTL, as this is currently the only use of this flag. Signed-off-by: Jonas Bonn Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index c4ada8b..f01def1 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -456,7 +456,8 @@ int drm_ioctl(struct inode *inode, struct file *filp, retcode = -EINVAL; } else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) || ((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) || - ((ioctl->flags & DRM_MASTER) && !file_priv->is_master)) { + ((ioctl->flags & DRM_MASTER) && !file_priv->is_master) || + (!(ioctl->flags & DRM_CONTROL_ALLOW) && (file_priv->minor->type == DRM_MINOR_CONTROL))) { retcode = -EACCES; } else { if (cmd & (IOC_IN | IOC_OUT)) { -- cgit v0.10.2 From 400138bc8b9fca66d7d40511eaed2dc3a75426c8 Mon Sep 17 00:00:00 2001 From: Jonas Bonn Date: Fri, 24 Apr 2009 15:06:36 +1000 Subject: drm: remove unreachable code in drm_sysfs.c This code was never going to get called in there. Signed-off-by: Jonas Bonn Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 022876a..8f93729 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -489,9 +489,7 @@ int drm_sysfs_device_add(struct drm_minor *minor) return 0; - device_unregister(&minor->kdev); err_out: - return err; } -- cgit v0.10.2 From 30ddbd94401a132f4d932775d1902b3c9a8c41b5 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 2 Mar 2009 11:13:04 +1000 Subject: drm: clean the map list before destroying the hash table The hash tables contains some of the mapping so its really nice to have it for the deletion phase. Signed-off-by: Ben Skeggs Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index ef87861..e8c2fd4 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -502,11 +502,11 @@ void drm_put_dev(struct drm_device *dev) dev->agp = NULL; } - drm_ht_remove(&dev->map_hash); - drm_ctxbitmap_cleanup(dev); - list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) drm_rmmap(dev, r_list->map); + drm_ht_remove(&dev->map_hash); + + drm_ctxbitmap_cleanup(dev); if (drm_core_check_feature(dev, DRIVER_MODESET)) drm_put_minor(&dev->control); -- cgit v0.10.2 From 3788f48a0fad246dbab826e8b2f07b403b0e3279 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 2 Mar 2009 10:37:44 +1000 Subject: drm: cleanup properly in drm_get_dev() failure paths Signed-off-by: Ben Skeggs Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index e8c2fd4..b9631e3 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -402,14 +402,14 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, if (dev->driver->load) { ret = dev->driver->load(dev, ent->driver_data); if (ret) - goto err_g3; + goto err_g4; } /* setup the grouping for the legacy output */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group); if (ret) - goto err_g3; + goto err_g4; } list_add_tail(&dev->driver_item, &driver->device_list); @@ -420,8 +420,11 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, return 0; -err_g3: +err_g4: drm_put_minor(&dev->primary); +err_g3: + if (drm_core_check_feature(dev, DRIVER_MODESET)) + drm_put_minor(&dev->control); err_g2: pci_disable_device(pdev); err_g1: -- cgit v0.10.2 From d2c8604121648b744ebb127991f1c5876931885e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 23 Apr 2009 19:19:42 -0400 Subject: x86, hpet: Stop soliciting hpet=force users on ICH4M The HPET in the ICH4M is not documented in the data sheet because it was not officially validated. While it is fine for hackers to continue to use "hpet=force" to enable the hardware that they have, it is not prudent to solicit additional "hpet=force" users on this hardware. [ Impact: remove hpet=force syslog message on old-ICH systems ] Signed-off-by: Len Brown Acked-by: Venkatesh Pallipadi LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index e95022e..7563b31 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -261,8 +261,6 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); - else - hpet_print_force_info(); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, -- cgit v0.10.2 From 097102c2d04974bdfcfa16a5f3062d499842139c Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 21 Apr 2009 09:33:14 +0200 Subject: pktcdvd.h should include mempool.h Fix this build error: In file included from fs/compat_ioctl.c:104: include/linux/pktcdvd.h:285: error: expected specifier-qualifier-list before 'mempool_t' Signed-off-by: Alexander Beregalov Signed-off-by: Jens Axboe diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h index 04b4d73..d745f5b 100644 --- a/include/linux/pktcdvd.h +++ b/include/linux/pktcdvd.h @@ -113,6 +113,7 @@ struct pkt_ctrl_command { #include #include #include +#include /* default bio write queue congestion marks */ #define PKT_WRITE_CONGESTION_ON 10000 -- cgit v0.10.2 From 42dad7647aec49b3ad20dd0cb832b232a6ae514f Mon Sep 17 00:00:00 2001 From: Jerome Marchand Date: Wed, 22 Apr 2009 14:01:49 +0200 Subject: block: simplify I/O stat accounting This simplifies I/O stat accounting switching code and separates it completely from I/O scheduler switch code. Requests are accounted according to the state of their request queue at the time of the request allocation. There is no need anymore to flush the request queue when switching I/O accounting state. Signed-off-by: Jerome Marchand Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index 07ab754..2998fe3 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -643,7 +643,7 @@ static inline void blk_free_request(struct request_queue *q, struct request *rq) } static struct request * -blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask) +blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask) { struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask); @@ -652,7 +652,7 @@ blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask) blk_rq_init(q, rq); - rq->cmd_flags = rw | REQ_ALLOCED; + rq->cmd_flags = flags | REQ_ALLOCED; if (priv) { if (unlikely(elv_set_request(q, rq, gfp_mask))) { @@ -792,6 +792,8 @@ static struct request *get_request(struct request_queue *q, int rw_flags, if (priv) rl->elvpriv++; + if (blk_queue_io_stat(q)) + rw_flags |= REQ_IO_STAT; spin_unlock_irq(q->queue_lock); rq = blk_alloc_request(q, rw_flags, priv, gfp_mask); diff --git a/block/blk-merge.c b/block/blk-merge.c index 63760ca..23d2a6f 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -402,7 +402,10 @@ static int attempt_merge(struct request_queue *q, struct request *req, elv_merge_requests(q, req, next); - blk_account_io_merge(req); + /* + * 'next' is going away, so update stats accordingly + */ + blk_account_io_merge(next); req->ioprio = ioprio_best(req->ioprio, next->ioprio); if (blk_rq_cpu_valid(next)) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index cac4e9f..3ff9bba 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -209,14 +209,10 @@ static ssize_t queue_iostats_store(struct request_queue *q, const char *page, ssize_t ret = queue_var_store(&stats, page, count); spin_lock_irq(q->queue_lock); - elv_quiesce_start(q); - if (stats) queue_flag_set(QUEUE_FLAG_IO_STAT, q); else queue_flag_clear(QUEUE_FLAG_IO_STAT, q); - - elv_quiesce_end(q); spin_unlock_irq(q->queue_lock); return ret; diff --git a/block/blk.h b/block/blk.h index 5dfc412..79c85f7 100644 --- a/block/blk.h +++ b/block/blk.h @@ -114,12 +114,7 @@ static inline int blk_cpu_to_group(int cpu) static inline int blk_do_io_stat(struct request *rq) { - struct gendisk *disk = rq->rq_disk; - - if (!disk || !disk->queue) - return 0; - - return blk_queue_io_stat(disk->queue) && (rq->cmd_flags & REQ_ELVPRIV); + return rq->rq_disk && blk_rq_io_stat(rq); } #endif diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ba54c83..2755d5c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -118,6 +118,7 @@ enum rq_flag_bits { __REQ_COPY_USER, /* contains copies of user pages */ __REQ_INTEGRITY, /* integrity metadata has been remapped */ __REQ_NOIDLE, /* Don't anticipate more IO after this one */ + __REQ_IO_STAT, /* account I/O stat */ __REQ_NR_BITS, /* stops here */ }; @@ -145,6 +146,7 @@ enum rq_flag_bits { #define REQ_COPY_USER (1 << __REQ_COPY_USER) #define REQ_INTEGRITY (1 << __REQ_INTEGRITY) #define REQ_NOIDLE (1 << __REQ_NOIDLE) +#define REQ_IO_STAT (1 << __REQ_IO_STAT) #define BLK_MAX_CDB 16 @@ -598,6 +600,7 @@ enum { blk_failfast_transport(rq) || \ blk_failfast_driver(rq)) #define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED) +#define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT) #define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) -- cgit v0.10.2 From f3c737de8f57b5ce756010c2175f7d574194b30d Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Thu, 23 Apr 2009 08:37:58 +0200 Subject: umem: fix request_queue lock warning The umem driver issues two warnings on boot, due to blk_plug_device() and blk_remove_plug() being called without q->queue_lock held. Starting with e48ec690 (block: extend queue_flag bitops), the queue_flag_* functions warn if q->queue_lock doesn't appear to be locked. In fact, q->queue_lock is NULL (though that apparently isn't otherwise a problem as the driver is using card->lock for everything). Although blk_init_queue() with take a request_fn_proc and spinlock_t*, there isn't a corresponding init helper that takes a make_request_fn. Setting queue_lock to &card->lock explicitly seems to work fine for me. The warning goes away and the device appears to behave. [ 1.531881] v2.3 : Micro Memory(tm) PCI memory board block driver [ 1.538136] umem 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.545018] umem 0000:02:01.0: Micro Memory(tm) controller found (PCI Mem Module (Battery Backup)) [ 1.554176] umem 0000:02:01.0: CSR 0xfc9ffc00 -> 0xffffc200013d0c00 (0x100) [ 1.561279] umem 0000:02:01.0: Size 1048576 KB, Battery 1 Disabled (FAILURE), Battery 2 Disabled (FAILURE) [ 1.571114] umem 0000:02:01.0: Window size 16777216 bytes, IRQ 20 [ 1.577304] umem 0000:02:01.0: memory NOT initialized. Consider over-writing whole device. [ 1.585989] umema:<4>------------[ cut here ]------------ [ 1.591775] WARNING: at include/linux/blkdev.h:492 blk_plug_device+0x6d/0x106() [ 1.592025] Hardware name: H8SSL [ 1.592025] Modules linked in: [ 1.592025] Pid: 1, comm: swapper Not tainted 2.6.29 #8 [ 1.592025] Call Trace: [ 1.592025] [] warn_slowpath+0xd3/0xf2 [ 1.592025] [] ? save_trace+0x3f/0x9b [ 1.592025] [] ? add_lock_to_list+0x7a/0xba [ 1.592025] [] ? validate_chain+0xb3b/0xce8 [ 1.592025] [] ? mm_make_request+0x27/0x59 [ 1.592025] [] ? mm_make_request+0x27/0x59 [ 1.592025] [] ? __lock_acquire+0x74e/0x7b9 [ 1.592025] [] ? get_lock_stats+0x34/0x5e [ 1.592025] [] ? put_lock_stats+0xe/0x27 [ 1.592025] [] ? mm_make_request+0x27/0x59 [ 1.592025] [] blk_plug_device+0x6d/0x106 [ 1.592025] [] mm_make_request+0x46/0x59 [ 1.592025] [] generic_make_request+0x335/0x3cf [ 1.592025] [] ? mempool_alloc_slab+0x11/0x13 [ 1.592025] [] ? mempool_alloc+0x45/0x101 [ 1.592025] [] ? put_lock_stats+0xe/0x27 [ 1.592025] [] submit_bio+0x10a/0x119 [ 1.592025] [] submit_bh+0xe5/0x109 [ 1.592025] [] block_read_full_page+0x2aa/0x2cb [ 1.592025] [] ? blkdev_get_block+0x0/0x4c [ 1.592025] [] ? _spin_unlock_irq+0x36/0x51 [ 1.592025] [] ? __lru_cache_add+0x92/0xb2 [ 1.592025] [] blkdev_readpage+0x13/0x15 [ 1.592025] [] read_cache_page_async+0x90/0x134 [ 1.592025] [] ? blkdev_readpage+0x0/0x15 [ 1.592025] [] ? adfspart_check_ICS+0x0/0x16c [ 1.592025] [] read_cache_page+0xe/0x45 [ 1.592025] [] read_dev_sector+0x2e/0x93 [ 1.592025] [] adfspart_check_ICS+0x28/0x16c [ 1.592025] [] ? trace_hardirqs_on+0xd/0xf [ 1.592025] [] ? adfspart_check_ICS+0x0/0x16c [ 1.592025] [] rescan_partitions+0x168/0x2fb [ 1.592025] [] __blkdev_get+0x259/0x336 [ 1.592025] [] ? kobject_put+0x47/0x4b [ 1.592025] [] blkdev_get+0xb/0xd [ 1.592025] [] register_disk+0xc4/0x12b [ 1.592025] [] add_disk+0xc3/0x12d [ 1.592025] [] ? mm_init+0x0/0x1a5 [ 1.592025] [] mm_init+0x129/0x1a5 [ 1.592025] [] ? mm_init+0x0/0x1a5 [ 1.592025] [] _stext+0x56/0x130 [ 1.592025] [] ? register_irq_proc+0xae/0xca [ 1.592025] [] ? proc_pid_lookup+0xb4/0x18b [ 1.592025] [] kernel_init+0x132/0x18b [ 1.592025] [] child_rip+0xa/0x20 [ 1.592025] [] ? restore_args+0x0/0x30 [ 1.592025] [] ? kernel_init+0x0/0x18b [ 1.592025] [] ? child_rip+0x0/0x20 [ 1.592025] ---[ end trace 7150b3b86da74e1e ]--- [ 1.889858] ------------[ cut here ]------------[ve_plug+0x5f/0x91() [ 1.893848] Hardware name: H8SSL [ 1.893848] Modules linked in: [ 1.893848] Pid: 1, comm: swapper Tainted: G W 2.6.29 #8 [ 1.893848] Call Trace: [ 1.893848] [] warn_slowpath+0xd3/0xf2 [ 1.893848] [] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1.893848] [] ? restore_args+0x0/0x30 [ 1.893848] [] ? __atomic_notifier_call_chain+0x0/0xb2 [ 1.893848] [] ? _spin_unlock_irq+0x31/0x51 [ 1.893848] [] ? _spin_unlock_irq+0x4d/0x51 [ 1.893848] [] ? mm_make_request+0x4e/0x59 [ 1.893848] [] ? get_lock_stats+0x34/0x5e [ 1.893848] [] ? put_lock_stats+0x25/0x27 [ 1.893848] [] ? mm_unplug_device+0x25/0x50 [ 1.893848] [] blk_remove_plug+0x5f/0x91 [ 1.893848] [] mm_unplug_device+0x30/0x50 [ 1.893848] [] blk_unplug+0x78/0x7d [ 1.893848] [] blk_backing_dev_unplug+0xd/0xf [ 1.893848] [] block_sync_page+0x4a/0x4c [ 1.893848] [] sync_page+0x44/0x4d [ 1.893848] [] __wait_on_bit_lock+0x42/0x8a [ 1.893848] [] ? sync_page+0x0/0x4d [ 1.893848] [] __lock_page+0x64/0x6b [ 1.893848] [] ? wake_bit_function+0x0/0x2a [ 1.893848] [] read_cache_page_async+0xd4/0x134 [ 1.893848] [] ? blkdev_readpage+0x0/0x15 [ 1.893848] [] ? adfspart_check_ICS+0x0/0x16c [ 1.893848] [] read_cache_page+0xe/0x45 [ 1.893848] [] read_dev_sector+0x2e/0x93 [ 1.893848] [] adfspart_check_ICS+0x28/0x16c [ 1.893848] [] ? trace_hardirqs_on+0xd/0xf [ 1.893848] [] ? adfspart_check_ICS+0x0/0x16c [ 1.893848] [] rescan_partitions+0x168/0x2fb [ 1.893848] [] __blkdev_get+0x259/0x336 [ 1.893848] [] ? kobject_put+0x47/0x4b [ 1.893848] [] blkdev_get+0xb/0xd [ 1.893848] [] register_disk+0xc4/0x12b [ 1.893848] [] add_disk+0xc3/0x12d [ 1.893848] [] ? mm_init+0x0/0x1a5 [ 1.893848] [] mm_init+0x129/0x1a5 [ 1.893848] [] ? mm_init+0x0/0x1a5 [ 1.893848] [] _stext+0x56/0x130 [ 1.893848] [] ? register_irq_proc+0xae/0xca [ 1.893848] [] ? proc_pid_lookup+0xb4/0x18b [ 1.893848] [] kernel_init+0x132/0x18b [ 1.893848] [] child_rip+0xa/0x20 [ 1.893848] [] ? restore_args+0x0/0x30 [ 1.893848] [] ? kernel_init+0x0/0x18b [ 1.893848] [] ? child_rip+0x0/0x20 [ 1.893848] ---[ end trace 7150b3b86da74e1f ]--- Signed-off-by: Sage Weil Signed-off-by: Jens Axboe diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 9744d59..858c34d 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -906,6 +906,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, goto failed_alloc; blk_queue_make_request(card->queue, mm_make_request); + card->queue->queue_lock = &card->lock; card->queue->queuedata = card; card->queue->unplug_fn = mm_unplug_device; -- cgit v0.10.2 From 17d5c8ca7572124c9623045f24b0c21d4aa2b47f Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Thu, 23 Apr 2009 10:32:59 +0200 Subject: block: fix intermittent dm timeout based oops Very rarely under stress testing of dm, oopses are occuring as something tampers with an old stack frame. This has been traced back to blk_abort_queue() leaving a timeout_list pointing to the stack. The reason is that sometimes blk_abort_request() won't delete the timer (if the request is marked as complete but before the timer has been removed, a small race window). Fix this by splicing back from the ususally empty list to the q->timeout_list. Signed-off-by: Hannes Reinecke Signed-off-by: Jens Axboe diff --git a/block/blk-timeout.c b/block/blk-timeout.c index 8f570c4..1ec0d50 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -230,6 +230,13 @@ void blk_abort_queue(struct request_queue *q) list_for_each_entry_safe(rq, tmp, &list, timeout_list) blk_abort_request(rq); + /* + * Occasionally, blk_abort_request() will return without + * deleting the element from the list. Make sure we add those back + * instead of leaving them on the local stack list. + */ + list_splice(&list, &q->timeout_list); + spin_unlock_irqrestore(q->queue_lock, flags); } -- cgit v0.10.2 From 26a2ac009c2b07e1959c8864ca23486c1c485587 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 23 Apr 2009 12:13:27 +0200 Subject: cfq-iosched: clear ->prio_trees[] on cfqd alloc Not strictly needed, but we should make it clear that we init the rbtree roots here. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 7e13f04..20a54b8 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2446,12 +2446,22 @@ static void cfq_exit_queue(struct elevator_queue *e) static void *cfq_init_queue(struct request_queue *q) { struct cfq_data *cfqd; + int i; cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node); if (!cfqd) return NULL; cfqd->service_tree = CFQ_RB_ROOT; + + /* + * Not strictly needed (since RB_ROOT just clears the node and we + * zeroed cfqd on alloc), but better be safe in case someone decides + * to add magic to the rb code + */ + for (i = 0; i < CFQ_PRIO_LISTS; i++) + cfqd->prio_trees[i] = RB_ROOT; + INIT_LIST_HEAD(&cfqd->cic_list); cfqd->queue = q; -- cgit v0.10.2 From 3ac6c9f8a66726745136e46f63600550c3eb6cec Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 23 Apr 2009 12:14:56 +0200 Subject: cfq-iosched: fix bug with aliased request and cooperation detection cfq_prio_tree_lookup() should return the direct match, yet it always returns zero. Fix that. cfq_prio_tree_add() assumes that we don't get a direct match, while it is very possible that we do. Using O_DIRECT, you can have different cfqq with matching requests, since you don't have the page cache to serialize things for you. Fix this bug by only adding the cfqq if there isn't an existing match. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 20a54b8..b0b754a 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -584,12 +584,13 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector, else break; p = n; + cfqq = NULL; } *ret_parent = parent; if (rb_link) *rb_link = p; - return NULL; + return cfqq; } static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq) @@ -608,10 +609,10 @@ static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq) __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector, &parent, &p); - BUG_ON(__cfqq); - - rb_link_node(&cfqq->p_node, parent, p); - rb_insert_color(&cfqq->p_node, root); + if (!__cfqq) { + rb_link_node(&cfqq->p_node, parent, p); + rb_insert_color(&cfqq->p_node, root); + } } /* -- cgit v0.10.2 From f2d1f0ae7851be5ebd9613a80dac139270938809 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 23 Apr 2009 12:19:38 +0200 Subject: cfq-iosched: cache prio_tree root in cfqq->p_root Currently we look it up from ->ioprio, but ->ioprio can change if either the process gets its IO priority changed explicitly, or if cfq decides to temporarily boost it. So if we are unlucky, we can end up attempting to remove a node from a different rbtree root than where it was added. Fix this by using ->org_ioprio as the prio_tree index, since that will only change for explicit IO priority settings (not for a boost). Additionally cache the rbtree root inside the cfqq, then we don't have to add code to reinsert the cfqq in the prio_tree if IO priority changes. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index b0b754a..a55a9bd 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -154,6 +154,8 @@ struct cfq_queue { unsigned long rb_key; /* prio tree member */ struct rb_node p_node; + /* prio tree root we belong to, if any */ + struct rb_root *p_root; /* sorted list of pending requests */ struct rb_root sort_list; /* if fifo isn't expired, next request to serve */ @@ -558,10 +560,10 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq, } static struct cfq_queue * -cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector, - struct rb_node **ret_parent, struct rb_node ***rb_link) +cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root, + sector_t sector, struct rb_node **ret_parent, + struct rb_node ***rb_link) { - struct rb_root *root = &cfqd->prio_trees[ioprio]; struct rb_node **p, *parent; struct cfq_queue *cfqq = NULL; @@ -595,24 +597,27 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector, static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq) { - struct rb_root *root = &cfqd->prio_trees[cfqq->ioprio]; struct rb_node **p, *parent; struct cfq_queue *__cfqq; - if (!RB_EMPTY_NODE(&cfqq->p_node)) - rb_erase_init(&cfqq->p_node, root); + if (cfqq->p_root) { + rb_erase(&cfqq->p_node, cfqq->p_root); + cfqq->p_root = NULL; + } if (cfq_class_idle(cfqq)) return; if (!cfqq->next_rq) return; - __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector, + cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio]; + __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector, &parent, &p); if (!__cfqq) { rb_link_node(&cfqq->p_node, parent, p); - rb_insert_color(&cfqq->p_node, root); - } + rb_insert_color(&cfqq->p_node, cfqq->p_root); + } else + cfqq->p_root = NULL; } /* @@ -657,8 +662,10 @@ static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) if (!RB_EMPTY_NODE(&cfqq->rb_node)) cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree); - if (!RB_EMPTY_NODE(&cfqq->p_node)) - rb_erase_init(&cfqq->p_node, &cfqd->prio_trees[cfqq->ioprio]); + if (cfqq->p_root) { + rb_erase(&cfqq->p_node, cfqq->p_root); + cfqq->p_root = NULL; + } BUG_ON(!cfqd->busy_queues); cfqd->busy_queues--; @@ -965,7 +972,7 @@ static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq) static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, struct cfq_queue *cur_cfqq) { - struct rb_root *root = &cfqd->prio_trees[cur_cfqq->ioprio]; + struct rb_root *root = &cfqd->prio_trees[cur_cfqq->org_ioprio]; struct rb_node *parent, *node; struct cfq_queue *__cfqq; sector_t sector = cfqd->last_position; @@ -977,8 +984,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, * First, if we find a request starting at the end of the last * request, choose it. */ - __cfqq = cfq_prio_tree_lookup(cfqd, cur_cfqq->ioprio, - sector, &parent, NULL); + __cfqq = cfq_prio_tree_lookup(cfqd, root, sector, &parent, NULL); if (__cfqq) return __cfqq; -- cgit v0.10.2 From 9ae2ccf26416ed52874718e2b0c8e6813253263a Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Fri, 24 Apr 2009 08:57:47 -0400 Subject: maintainers: Fix PowerPC 4xx git tree Update the git tree URL for the PowerPC 4xx git tree. Reported-by: Denis ChengRq Signed-off-by: Josh Boyer diff --git a/MAINTAINERS b/MAINTAINERS index e133ba4..53d6e61 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3375,7 +3375,7 @@ P: Matt Porter M: mporter@kernel.crashing.org W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git S: Maintained LINUX FOR POWERPC EMBEDDED XILINX VIRTEX -- cgit v0.10.2 From 644e28f3426810710b176080cc906995ebc24b63 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Thu, 23 Apr 2009 10:55:06 +0000 Subject: powerpc/44x: Correct memory size calculation for denali-based boards Some U-Boot versions incorrectly set the number of chipselects to two for Sequoia/Rainier boards while they only have one chipselect hardwired. This patch adds a workaround for this, hardcoding the number of chipselects to one for sequioa/rainer board models and reading the actual value from the memory controller register DDR0_10 otherwise. It also fixes another error in the way ibm4xx_denali_fixup_memsize calculates memory size. When testing the DDR_REDUC bit, the polarity is backwards. A "1" implies 32-bit wide memory while a "0" implies 64-bit wide memory. Signed-off-by: Mikhail Zolotaryov Signed-off-by: Valentine Barshak Signed-off-by: Steven A. Falco Acked-by: Stefan Roese Signed-off-by: Josh Boyer diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index 5c87843..325b310 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -158,21 +158,33 @@ void ibm440spe_fixup_memsize(void) #define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) -void ibm4xx_denali_fixup_memsize(void) +/* + * Some U-Boot versions set the number of chipselects to two + * for Sequoia/Rainier boards while they only have one chipselect + * hardwired. Hardcode the number of chipselects to one + * for sequioa/rainer board models or read the actual value + * from the memory controller register DDR0_10 otherwise. + */ +static inline u32 ibm4xx_denali_get_cs(void) { - u32 val, max_cs, max_col, max_row; - u32 cs, col, row, bank, dpath; - unsigned long memsize; + void *devp; + char model[64]; + u32 val, cs; - val = SDRAM0_READ(DDR0_02); - if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) - fatal("DDR controller is not initialized\n"); + devp = finddevice("/"); + if (!devp) + goto read_cs; - /* get maximum cs col and row values */ - max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); - max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); - max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + if (getprop(devp, "model", model, sizeof(model)) <= 0) + goto read_cs; + model[sizeof(model)-1] = 0; + + if (!strcmp(model, "amcc,sequoia") || + !strcmp(model, "amcc,rainier")) + return 1; + +read_cs: /* get CS value */ val = SDRAM0_READ(DDR0_10); @@ -183,7 +195,25 @@ void ibm4xx_denali_fixup_memsize(void) cs++; val = val >> 1; } + return cs; +} + +void ibm4xx_denali_fixup_memsize(void) +{ + u32 val, max_cs, max_col, max_row; + u32 cs, col, row, bank, dpath; + unsigned long memsize; + + val = SDRAM0_READ(DDR0_02); + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) + fatal("DDR controller is not initialized\n"); + /* get maximum cs col and row values */ + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + + cs = ibm4xx_denali_get_cs(); if (!cs) fatal("No memory installed\n"); if (cs > max_cs) @@ -193,9 +223,9 @@ void ibm4xx_denali_fixup_memsize(void) val = SDRAM0_READ(DDR0_14); if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) - dpath = 8; /* 64 bits */ - else dpath = 4; /* 32 bits */ + else + dpath = 8; /* 64 bits */ /* get address pins (rows) */ val = SDRAM0_READ(DDR0_42); -- cgit v0.10.2 From 5ff482940f5aa2cdc3424c4a8ea94b9833b2af5f Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Fri, 24 Apr 2009 15:37:44 +0200 Subject: netfilter: nf_ct_dccp/udplite: fix protocol registration error Commit d0dba725 (netfilter: ctnetlink: add callbacks to the per-proto nlattrs) changed the protocol registration function to abort if the to-be registered protocol doesn't provide a new callback function. The DCCP and UDP-Lite IPv6 protocols were missed in this conversion, add the required callback pointer. Reported-and-tested-by: Steven Jan Springl Signed-off-by: Patrick McHardy diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c index 50dac8db..5411d63 100644 --- a/net/netfilter/nf_conntrack_proto_dccp.c +++ b/net/netfilter/nf_conntrack_proto_dccp.c @@ -777,6 +777,7 @@ static struct nf_conntrack_l4proto dccp_proto6 __read_mostly = { .print_conntrack = dccp_print_conntrack, #if defined(CONFIG_NF_CT_NETLINK) || defined(CONFIG_NF_CT_NETLINK_MODULE) .to_nlattr = dccp_to_nlattr, + .nlattr_size = dccp_nlattr_size, .from_nlattr = nlattr_to_dccp, .tuple_to_nlattr = nf_ct_port_tuple_to_nlattr, .nlattr_tuple_size = nf_ct_port_nlattr_tuple_size, diff --git a/net/netfilter/nf_conntrack_proto_udplite.c b/net/netfilter/nf_conntrack_proto_udplite.c index 4614696..0badedc 100644 --- a/net/netfilter/nf_conntrack_proto_udplite.c +++ b/net/netfilter/nf_conntrack_proto_udplite.c @@ -204,6 +204,7 @@ static struct nf_conntrack_l4proto nf_conntrack_l4proto_udplite6 __read_mostly = .error = udplite_error, #if defined(CONFIG_NF_CT_NETLINK) || defined(CONFIG_NF_CT_NETLINK_MODULE) .tuple_to_nlattr = nf_ct_port_tuple_to_nlattr, + .nlattr_tuple_size = nf_ct_port_nlattr_tuple_size, .nlattr_to_tuple = nf_ct_port_nlattr_to_tuple, .nla_policy = nf_ct_port_nla_policy, #endif -- cgit v0.10.2 From 8c652f96d3852b97a49c331cd0bb02d22f3cb31b Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 24 Apr 2009 01:01:56 +0200 Subject: do_execve() must not clear fs->in_exec if it was set by another thread If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec unconditionally. This is wrong if we race with our sub-thread which also does do_execve: Two threads T1 and T2 and another process P, all share the same ->fs. T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since ->fs is shared, we set LSM_UNSAFE but not ->in_exec. P exits and decrements fs->users. T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not shared, we set fs->in_exec. T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and return to the user-space. T1 does clone(CLONE_FS /* without CLONE_THREAD */). T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with another process. Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change do_execve() to clear ->in_exec depending on res. When do_execve() suceeds, it is safe to clear ->in_exec unconditionally. It can be set only if we don't share ->fs with another process, and since we already killed all sub-threads either ->in_exec == 0 or we are the only user of this ->fs. Also, we do not need fs->lock to clear fs->in_exec. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath Acked-by: Hugh Dickins Signed-off-by: Linus Torvalds diff --git a/fs/compat.c b/fs/compat.c index 379a399..681ed81 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1476,6 +1476,7 @@ int compat_do_execve(char * filename, struct linux_binprm *bprm; struct file *file; struct files_struct *displaced; + bool clear_in_exec; int retval; retval = unshare_files(&displaced); @@ -1498,8 +1499,9 @@ int compat_do_execve(char * filename, goto out_unlock; retval = check_unsafe_exec(bprm); - if (retval) + if (retval < 0) goto out_unlock; + clear_in_exec = retval; file = open_exec(filename); retval = PTR_ERR(file); @@ -1546,9 +1548,7 @@ int compat_do_execve(char * filename, goto out; /* execve succeeded */ - write_lock(¤t->fs->lock); current->fs->in_exec = 0; - write_unlock(¤t->fs->lock); current->in_execve = 0; mutex_unlock(¤t->cred_exec_mutex); acct_update_integrals(current); @@ -1568,9 +1568,8 @@ out_file: } out_unmark: - write_lock(¤t->fs->lock); - current->fs->in_exec = 0; - write_unlock(¤t->fs->lock); + if (clear_in_exec) + current->fs->in_exec = 0; out_unlock: current->in_execve = 0; diff --git a/fs/exec.c b/fs/exec.c index 052a961..a2e6989 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1077,9 +1077,11 @@ int check_unsafe_exec(struct linux_binprm *bprm) if (p->fs->users > n_fs) { bprm->unsafe |= LSM_UNSAFE_SHARE; } else { - if (p->fs->in_exec) - res = -EAGAIN; - p->fs->in_exec = 1; + res = -EAGAIN; + if (!p->fs->in_exec) { + p->fs->in_exec = 1; + res = 1; + } } unlock_task_sighand(p, &flags); @@ -1284,6 +1286,7 @@ int do_execve(char * filename, struct linux_binprm *bprm; struct file *file; struct files_struct *displaced; + bool clear_in_exec; int retval; retval = unshare_files(&displaced); @@ -1306,8 +1309,9 @@ int do_execve(char * filename, goto out_unlock; retval = check_unsafe_exec(bprm); - if (retval) + if (retval < 0) goto out_unlock; + clear_in_exec = retval; file = open_exec(filename); retval = PTR_ERR(file); @@ -1355,9 +1359,7 @@ int do_execve(char * filename, goto out; /* execve succeeded */ - write_lock(¤t->fs->lock); current->fs->in_exec = 0; - write_unlock(¤t->fs->lock); current->in_execve = 0; mutex_unlock(¤t->cred_exec_mutex); acct_update_integrals(current); @@ -1377,9 +1379,8 @@ out_file: } out_unmark: - write_lock(¤t->fs->lock); - current->fs->in_exec = 0; - write_unlock(¤t->fs->lock); + if (clear_in_exec) + current->fs->in_exec = 0; out_unlock: current->in_execve = 0; -- cgit v0.10.2 From 437f7fdb607f32b737e4da9f14bebcfdac2c90c3 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 24 Apr 2009 01:02:45 +0200 Subject: check_unsafe_exec: s/lock_task_sighand/rcu_read_lock/ write_lock(¤t->fs->lock) guarantees we can't wrongly miss LSM_UNSAFE_SHARE, this is what we care about. Use rcu_read_lock() instead of ->siglock to iterate over the sub-threads. We must see all CLONE_THREAD|CLONE_FS threads which didn't pass exit_fs(), it takes fs->lock too. With or without this patch we can miss the freshly cloned thread and set LSM_UNSAFE_SHARE, we don't care. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath [ Fixed lock/unlock typo - Hugh ] Acked-by: Hugh Dickins Signed-off-by: Linus Torvalds diff --git a/fs/exec.c b/fs/exec.c index a2e6989..a3a8ce8 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1060,7 +1060,6 @@ EXPORT_SYMBOL(install_exec_creds); int check_unsafe_exec(struct linux_binprm *bprm) { struct task_struct *p = current, *t; - unsigned long flags; unsigned n_fs; int res = 0; @@ -1068,11 +1067,12 @@ int check_unsafe_exec(struct linux_binprm *bprm) n_fs = 1; write_lock(&p->fs->lock); - lock_task_sighand(p, &flags); + rcu_read_lock(); for (t = next_thread(p); t != p; t = next_thread(t)) { if (t->fs == p->fs) n_fs++; } + rcu_read_unlock(); if (p->fs->users > n_fs) { bprm->unsafe |= LSM_UNSAFE_SHARE; @@ -1083,8 +1083,6 @@ int check_unsafe_exec(struct linux_binprm *bprm) res = 1; } } - - unlock_task_sighand(p, &flags); write_unlock(&p->fs->lock); return res; -- cgit v0.10.2 From 418df63c2d94f238ac7e1d1d53be35dd6b7a7252 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Wed, 22 Apr 2009 12:01:49 +0100 Subject: Delete slow-work timers properly Slow-work appears to delete its timer as soon as the first user unregisters, even though other users could be active. At the same time, it never seems to delete slow_work_oom_timer. Arrange for both to happen in the shutdown path. Signed-off-by: Jonathan Corbet Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/kernel/slow-work.c b/kernel/slow-work.c index cf2bc01..b28d1913 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -609,14 +609,14 @@ void slow_work_unregister_user(void) if (slow_work_user_count == 0) { printk(KERN_NOTICE "Slow work thread pool: Shutting down\n"); slow_work_threads_should_exit = true; + del_timer_sync(&slow_work_cull_timer); + del_timer_sync(&slow_work_oom_timer); wake_up_all(&slow_work_thread_wq); wait_for_completion(&slow_work_last_thread_exited); printk(KERN_NOTICE "Slow work thread pool:" " Shut down complete\n"); } - del_timer_sync(&slow_work_cull_timer); - mutex_unlock(&slow_work_user_lock); } EXPORT_SYMBOL(slow_work_unregister_user); -- cgit v0.10.2 From 596a5c4e43b08e90c0cd788861f859bf7ed6eddc Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 22 Apr 2009 12:10:07 +0100 Subject: MN10300: Update the ASB2303 defconfig Update the defconfig for the ASB2303 evaluation board. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig index 3aa8906..3acce23 100644 --- a/arch/mn10300/configs/asb2303_defconfig +++ b/arch/mn10300/configs/asb2303_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Tue Feb 19 18:52:24 2008 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 11:13:22 2009 # CONFIG_MN10300=y CONFIG_AM33=y @@ -18,7 +18,6 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_BUG=y CONFIG_QUICKLIST=y CONFIG_ARCH_HAS_ILOG2_U32=y -# CONFIG_ARCH_SUPPORTS_AOUT is not set CONFIG_GENERIC_HARDIRQS=y # CONFIG_HOTPLUG_CPU is not set CONFIG_HZ=1000 @@ -40,52 +39,58 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set -CONFIG_OPROFILE=y -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set -CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set +# CONFIG_FREEZER is not set # # Matsushita MN10300 system setup @@ -107,7 +112,6 @@ CONFIG_INTERRUPT_VECTOR_BASE=0x90000000 CONFIG_KERNEL_TEXT_ADDRESS=0x90001000 CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000 CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y CONFIG_MN10300_CURRENT_IN_E2=y CONFIG_MN10300_USING_JTAG=y CONFIG_MN10300_RTC=y @@ -135,13 +139,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # Power management options @@ -152,11 +158,9 @@ CONFIG_VIRT_TO_BUS=y # Executable formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -194,8 +198,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -203,6 +205,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -212,7 +215,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -223,14 +228,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -255,6 +254,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -297,9 +297,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PLATRAM is not set # @@ -319,14 +317,23 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HAVE_IDE is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set # # SCSI device support @@ -334,7 +341,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -345,10 +352,15 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -358,6 +370,10 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -382,6 +398,7 @@ CONFIG_SMC91X=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -403,6 +420,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -411,34 +429,43 @@ CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -453,21 +480,17 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -481,20 +504,23 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -506,19 +532,17 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_ROMFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -535,12 +559,16 @@ CONFIG_SUNRPC=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set # @@ -548,26 +576,26 @@ CONFIG_MAGIC_SYSRQ=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y - -# -# Profiling support -# +CONFIG_NLATTR=y -- cgit v0.10.2 From 67cd724f6d0919072a284f150a5761a160ac5cfa Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 22 Apr 2009 15:02:23 +0100 Subject: cafe_nand: Fix warning Wrong types on IRQ handler Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 7c5b257..29acd06 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -332,7 +332,7 @@ static void cafe_select_chip(struct mtd_info *mtd, int chipnr) cafe->ctl1 &= ~CTRL1_CHIPSELECT; } -static int cafe_nand_interrupt(int irq, void *id) +static irqreturn_t cafe_nand_interrupt(int irq, void *id) { struct mtd_info *mtd = id; struct cafe_priv *cafe = mtd->priv; -- cgit v0.10.2 From 79e95eba026944ec3353754f24e316d3aaa209fe Mon Sep 17 00:00:00 2001 From: Niels de Vos Date: Wed, 22 Apr 2009 15:02:44 +0100 Subject: serial: remove contact data Remove my name and emailaddress from note in the source. Wincor Nixdorf only has some ITE-chips on their mainboards, other chips are not available for me for testing. Signed-off-by: Niels de Vos Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 7ddff3f..938bc1b 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -771,8 +771,6 @@ static int pci_netmos_init(struct pci_dev *dev) } /* - * ITE support by Niels de Vos - * * These chips are available with optionally one parallel port and up to * two serial ports. Unfortunately they all have the same product id. * -- cgit v0.10.2 From ec5f5bf80501abfe2da2897cfcde8452b545aacb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 22 Apr 2009 15:03:15 +0100 Subject: radio_si470x: Fix free memory corruption The release path for a disconnected device frees the object then unlocks the mutex in the freed object... Found by Dan Carpenter using Smatch Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 92c2977..bd945d0 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -1200,7 +1200,7 @@ static int si470x_fops_release(struct file *file) video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); - goto unlock; + goto done; } /* stop rds reception */ -- cgit v0.10.2 From 4b0706624930dc75c3b0d0df463d89759ef7de29 Mon Sep 17 00:00:00 2001 From: Laszlo Attila Toth Date: Fri, 24 Apr 2009 16:55:25 +0200 Subject: netfilter: Kconfig: TProxy doesn't depend on NF_CONNTRACK Signed-off-by: Laszlo Attila Toth Signed-off-by: Patrick McHardy diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 2329c5f..881203c 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -275,6 +275,8 @@ config NF_CT_NETLINK help This option enables support for a netlink-based userspace interface +endif # NF_CONNTRACK + # transparent proxy support config NETFILTER_TPROXY tristate "Transparent proxying support (EXPERIMENTAL)" @@ -290,8 +292,6 @@ config NETFILTER_TPROXY To compile it as a module, choose M here. If unsure, say N. -endif # NF_CONNTRACK - config NETFILTER_XTABLES tristate "Netfilter Xtables support (required for ip_tables)" default m if NETFILTER_ADVANCED=n -- cgit v0.10.2 From 71951b64a5a87c09eb6fde59ce51aaab2fdaeab2 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 24 Apr 2009 16:58:41 +0200 Subject: netfilter: nf_ct_dccp: add missing role attributes for DCCP This patch adds missing role attribute to the DCCP type, otherwise the creation of entries is not of any use. The attribute added is CTA_PROTOINFO_DCCP_ROLE which contains the role of the conntrack original tuple. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index 29fe9ea..1a865e4 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -100,6 +100,7 @@ enum ctattr_protoinfo_tcp { enum ctattr_protoinfo_dccp { CTA_PROTOINFO_DCCP_UNSPEC, CTA_PROTOINFO_DCCP_STATE, + CTA_PROTOINFO_DCCP_ROLE, __CTA_PROTOINFO_DCCP_MAX, }; #define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1) diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c index 5411d63..8e757dd 100644 --- a/net/netfilter/nf_conntrack_proto_dccp.c +++ b/net/netfilter/nf_conntrack_proto_dccp.c @@ -633,6 +633,8 @@ static int dccp_to_nlattr(struct sk_buff *skb, struct nlattr *nla, if (!nest_parms) goto nla_put_failure; NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_STATE, ct->proto.dccp.state); + NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_ROLE, + ct->proto.dccp.role[IP_CT_DIR_ORIGINAL]); nla_nest_end(skb, nest_parms); read_unlock_bh(&dccp_lock); return 0; @@ -644,6 +646,7 @@ nla_put_failure: static const struct nla_policy dccp_nla_policy[CTA_PROTOINFO_DCCP_MAX + 1] = { [CTA_PROTOINFO_DCCP_STATE] = { .type = NLA_U8 }, + [CTA_PROTOINFO_DCCP_ROLE] = { .type = NLA_U8 }, }; static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct) @@ -661,11 +664,21 @@ static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct) return err; if (!tb[CTA_PROTOINFO_DCCP_STATE] || - nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]) >= CT_DCCP_IGNORE) + !tb[CTA_PROTOINFO_DCCP_ROLE] || + nla_get_u8(tb[CTA_PROTOINFO_DCCP_ROLE]) > CT_DCCP_ROLE_MAX || + nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]) >= CT_DCCP_IGNORE) { return -EINVAL; + } write_lock_bh(&dccp_lock); ct->proto.dccp.state = nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]); + if (nla_get_u8(tb[CTA_PROTOINFO_DCCP_ROLE]) == CT_DCCP_ROLE_CLIENT) { + ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_CLIENT; + ct->proto.dccp.role[IP_CT_DIR_REPLY] = CT_DCCP_ROLE_SERVER; + } else { + ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_SERVER; + ct->proto.dccp.role[IP_CT_DIR_REPLY] = CT_DCCP_ROLE_CLIENT; + } write_unlock_bh(&dccp_lock); return 0; } -- cgit v0.10.2 From 37e55cf0ceb8803256bf69a3e45bd668bf90b76f Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 24 Apr 2009 17:05:21 +0200 Subject: netfilter: xt_recent: fix stack overread in compat code Related-to: commit 325fb5b4d26038cba665dd0d8ee09555321061f0 The compat path suffers from a similar problem. It only uses a __be32 when all of the recent code uses, and expects, an nf_inet_addr everywhere. As a result, addresses stored by xt_recents were filled with whatever other stuff was on the stack following the be32. Signed-off-by: Jan Engelhardt With a minor compile fix from Roman. Reported-and-tested-by: Roman Hoog Antink Signed-off-by: Patrick McHardy diff --git a/net/netfilter/xt_recent.c b/net/netfilter/xt_recent.c index 791e030..eb0ceb8 100644 --- a/net/netfilter/xt_recent.c +++ b/net/netfilter/xt_recent.c @@ -474,7 +474,7 @@ static ssize_t recent_old_proc_write(struct file *file, struct recent_table *t = pde->data; struct recent_entry *e; char buf[sizeof("+255.255.255.255")], *c = buf; - __be32 addr; + union nf_inet_addr addr = {}; int add; if (size > sizeof(buf)) @@ -506,14 +506,13 @@ static ssize_t recent_old_proc_write(struct file *file, add = 1; break; } - addr = in_aton(c); + addr.ip = in_aton(c); spin_lock_bh(&recent_lock); - e = recent_entry_lookup(t, (const void *)&addr, NFPROTO_IPV4, 0); + e = recent_entry_lookup(t, &addr, NFPROTO_IPV4, 0); if (e == NULL) { if (add) - recent_entry_init(t, (const void *)&addr, - NFPROTO_IPV4, 0); + recent_entry_init(t, &addr, NFPROTO_IPV4, 0); } else { if (add) recent_entry_update(t, e); -- cgit v0.10.2 From 485c26ec70f823f2a9cf45982b724893e53a859e Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 24 Apr 2009 13:43:20 -0400 Subject: ext4: Fix softlockup caused by illegal i_file_acl value in on-disk inode If the block containing external extended attributes (which is stored in i_file_acl and i_file_acl_high) is larger than the on-disk filesystem, the process which tried to access the extended attributes will endlessly issue kernel printks complaining that "__find_get_block_slow() failed", locking up that CPU until the system is forcibly rebooted. So when we read in the inode, make sure the i_file_acl value is legal, and if not, flag the filesystem as being corrupted. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c6bd6ce..cab75bb 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4409,7 +4409,17 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) (__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32; } - if (ei->i_flags & EXT4_EXTENTS_FL) { + if (ei->i_file_acl && + ((ei->i_file_acl < + (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) + + EXT4_SB(sb)->s_gdb_count)) || + (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) { + ext4_error(sb, __func__, + "bad extended attribute block %llu in inode #%lu", + ei->i_file_acl, inode->i_ino); + ret = -EIO; + goto bad_inode; + } else if (ei->i_flags & EXT4_EXTENTS_FL) { /* Validate extent which is part of inode */ ret = ext4_ext_check_inode(inode); } else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || -- cgit v0.10.2 From 97e728d4353f38c87bf0804cdfd79a9b13fc2c3e Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 21 Apr 2009 17:40:57 -0400 Subject: Btrfs: try to keep a healthy ratio of metadata vs data block groups This patch makes the chunk allocator keep a good ratio of metadata vs data block groups. By default for every 8 data block groups, we'll allocate 1 metadata chunk, or about 12% of the disk will be allocated for metadata. This can be changed by specifying the metadata_ratio mount option. This is simply the number of data block groups that have to be allocated to force a metadata chunk allocation. By making sure we allocate metadata chunks more often, we are less likely to get into situations where the whole disk has been allocated as data block groups. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index ad96495..213535f 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -881,6 +881,9 @@ struct btrfs_fs_info { u64 metadata_alloc_profile; u64 system_alloc_profile; + unsigned data_chunk_allocations; + unsigned metadata_ratio; + void *bdev_holder; }; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index a6b8374..44c94d8 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1604,6 +1604,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, fs_info->btree_inode = new_inode(sb); fs_info->btree_inode->i_ino = 1; fs_info->btree_inode->i_nlink = 1; + fs_info->metadata_ratio = 8; fs_info->thread_pool_size = min_t(unsigned long, num_online_cpus() + 2, 8); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 178df4c..2895a83 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -1918,15 +1918,29 @@ void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode, spin_unlock(&info->lock); } +static void force_metadata_allocation(struct btrfs_fs_info *info) +{ + struct list_head *head = &info->space_info; + struct btrfs_space_info *found; + + rcu_read_lock(); + list_for_each_entry_rcu(found, head, list) { + if (found->flags & BTRFS_BLOCK_GROUP_METADATA) + found->force_alloc = 1; + } + rcu_read_unlock(); +} + static int do_chunk_alloc(struct btrfs_trans_handle *trans, struct btrfs_root *extent_root, u64 alloc_bytes, u64 flags, int force) { struct btrfs_space_info *space_info; + struct btrfs_fs_info *fs_info = extent_root->fs_info; u64 thresh; int ret = 0; - mutex_lock(&extent_root->fs_info->chunk_mutex); + mutex_lock(&fs_info->chunk_mutex); flags = btrfs_reduce_alloc_profile(extent_root, flags); @@ -1958,6 +1972,18 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans, } spin_unlock(&space_info->lock); + /* + * if we're doing a data chunk, go ahead and make sure that + * we keep a reasonable number of metadata chunks allocated in the + * FS as well. + */ + if (flags & BTRFS_BLOCK_GROUP_DATA) { + fs_info->data_chunk_allocations++; + if (!(fs_info->data_chunk_allocations % + fs_info->metadata_ratio)) + force_metadata_allocation(fs_info); + } + ret = btrfs_alloc_chunk(trans, extent_root, flags); if (ret) space_info->full = 1; diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 9744af9..30c9a8c 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -68,7 +68,7 @@ enum { Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow, Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier, Opt_ssd, Opt_thread_pool, Opt_noacl, Opt_compress, Opt_notreelog, - Opt_flushoncommit, Opt_err, + Opt_ratio, Opt_flushoncommit, Opt_err, }; static match_table_t tokens = { @@ -87,6 +87,7 @@ static match_table_t tokens = { {Opt_noacl, "noacl"}, {Opt_notreelog, "notreelog"}, {Opt_flushoncommit, "flushoncommit"}, + {Opt_ratio, "metadata_ratio=%d"}, {Opt_err, NULL}, }; @@ -234,6 +235,15 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) printk(KERN_INFO "btrfs: turning on flush-on-commit\n"); btrfs_set_opt(info->mount_opt, FLUSHONCOMMIT); break; + case Opt_ratio: + intarg = 0; + match_int(&args[0], &intarg); + if (intarg) { + info->metadata_ratio = intarg; + printk(KERN_INFO "btrfs: metadata ratio %d\n", + info->metadata_ratio); + } + break; default: break; } -- cgit v0.10.2 From 2ea2544ef5dad5cac52f1e4c7b812631274fc1cb Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 13 Apr 2009 15:32:28 +0200 Subject: Btrfs: simplify makefile Get rid of the hacks for building out of tree, and always use += for assigning to the object lists. Signed-off-by: Christoph Hellwig Signed-off-by: Chris Mason diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile index 9adf5e4..9421284 100644 --- a/fs/btrfs/Makefile +++ b/fs/btrfs/Makefile @@ -1,25 +1,10 @@ -ifneq ($(KERNELRELEASE),) -# kbuild part of makefile obj-$(CONFIG_BTRFS_FS) := btrfs.o -btrfs-y := super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \ + +btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \ file-item.o inode-item.o inode-map.o disk-io.o \ transaction.o inode.o file.o tree-defrag.o \ extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \ extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \ ref-cache.o export.o tree-log.o acl.o free-space-cache.o zlib.o \ compression.o delayed-ref.o -else - -# Normal Makefile - -KERNELDIR := /lib/modules/`uname -r`/build -all: - $(MAKE) -C $(KERNELDIR) M=`pwd` CONFIG_BTRFS_FS=m modules - -modules_install: - $(MAKE) -C $(KERNELDIR) M=`pwd` modules_install -clean: - $(MAKE) -C $(KERNELDIR) M=`pwd` clean - -endif -- cgit v0.10.2 From 0d4bf11e5309eff64272a49e1ea55658372abc56 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 13 Apr 2009 15:33:56 +0200 Subject: Btrfs: don't export symbols Currently the extent_map code is only for btrfs so don't export it's symbols. Signed-off-by: Christoph Hellwig Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index b187917..9827fa1 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -43,7 +43,6 @@ void extent_map_tree_init(struct extent_map_tree *tree, gfp_t mask) tree->map.rb_node = NULL; spin_lock_init(&tree->lock); } -EXPORT_SYMBOL(extent_map_tree_init); /** * alloc_extent_map - allocate new extent map structure @@ -64,7 +63,6 @@ struct extent_map *alloc_extent_map(gfp_t mask) atomic_set(&em->refs, 1); return em; } -EXPORT_SYMBOL(alloc_extent_map); /** * free_extent_map - drop reference count of an extent_map @@ -83,7 +81,6 @@ void free_extent_map(struct extent_map *em) kmem_cache_free(extent_map_cache, em); } } -EXPORT_SYMBOL(free_extent_map); static struct rb_node *tree_insert(struct rb_root *root, u64 offset, struct rb_node *node) @@ -264,7 +261,6 @@ int add_extent_mapping(struct extent_map_tree *tree, out: return ret; } -EXPORT_SYMBOL(add_extent_mapping); /* simple helper to do math around the end of an extent, handling wrap */ static u64 range_end(u64 start, u64 len) @@ -326,7 +322,6 @@ found: out: return em; } -EXPORT_SYMBOL(lookup_extent_mapping); /** * remove_extent_mapping - removes an extent_map from the extent tree @@ -346,4 +341,3 @@ int remove_extent_mapping(struct extent_map_tree *tree, struct extent_map *em) em->in_tree = 0; return ret; } -EXPORT_SYMBOL(remove_extent_mapping); -- cgit v0.10.2 From 9601e3f6336f6ca66929f451b1f66085e68e36e3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 13 Apr 2009 15:33:09 +0200 Subject: Btrfs: kill btrfs_cache_create Just use kmem_cache_create directly. Signed-off-by: Christoph Hellwig Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 05a1c42..c33b540 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -17,12 +17,6 @@ #include "ctree.h" #include "btrfs_inode.h" -/* temporary define until extent_map moves out of btrfs */ -struct kmem_cache *btrfs_cache_create(const char *name, size_t size, - unsigned long extra_flags, - void (*ctor)(void *, struct kmem_cache *, - unsigned long)); - static struct kmem_cache *extent_state_cache; static struct kmem_cache *extent_buffer_cache; @@ -58,15 +52,15 @@ struct extent_page_data { int __init extent_io_init(void) { - extent_state_cache = btrfs_cache_create("extent_state", - sizeof(struct extent_state), 0, - NULL); + extent_state_cache = kmem_cache_create("extent_state", + sizeof(struct extent_state), 0, + SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL); if (!extent_state_cache) return -ENOMEM; - extent_buffer_cache = btrfs_cache_create("extent_buffers", - sizeof(struct extent_buffer), 0, - NULL); + extent_buffer_cache = kmem_cache_create("extent_buffers", + sizeof(struct extent_buffer), 0, + SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL); if (!extent_buffer_cache) goto free_state_cache; return 0; diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index 9827fa1..30c9365 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -6,19 +6,14 @@ #include #include "extent_map.h" -/* temporary define until extent_map moves out of btrfs */ -struct kmem_cache *btrfs_cache_create(const char *name, size_t size, - unsigned long extra_flags, - void (*ctor)(void *, struct kmem_cache *, - unsigned long)); static struct kmem_cache *extent_map_cache; int __init extent_map_init(void) { - extent_map_cache = btrfs_cache_create("extent_map", - sizeof(struct extent_map), 0, - NULL); + extent_map_cache = kmem_cache_create("extent_map", + sizeof(struct extent_map), 0, + SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL); if (!extent_map_cache) return -ENOMEM; return 0; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 65219f6..176b6cc 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4640,39 +4640,35 @@ void btrfs_destroy_cachep(void) kmem_cache_destroy(btrfs_path_cachep); } -struct kmem_cache *btrfs_cache_create(const char *name, size_t size, - unsigned long extra_flags, - void (*ctor)(void *)) -{ - return kmem_cache_create(name, size, 0, (SLAB_RECLAIM_ACCOUNT | - SLAB_MEM_SPREAD | extra_flags), ctor); -} - int btrfs_init_cachep(void) { - btrfs_inode_cachep = btrfs_cache_create("btrfs_inode_cache", - sizeof(struct btrfs_inode), - 0, init_once); + btrfs_inode_cachep = kmem_cache_create("btrfs_inode_cache", + sizeof(struct btrfs_inode), 0, + SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, init_once); if (!btrfs_inode_cachep) goto fail; - btrfs_trans_handle_cachep = - btrfs_cache_create("btrfs_trans_handle_cache", - sizeof(struct btrfs_trans_handle), - 0, NULL); + + btrfs_trans_handle_cachep = kmem_cache_create("btrfs_trans_handle_cache", + sizeof(struct btrfs_trans_handle), 0, + SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL); if (!btrfs_trans_handle_cachep) goto fail; - btrfs_transaction_cachep = btrfs_cache_create("btrfs_transaction_cache", - sizeof(struct btrfs_transaction), - 0, NULL); + + btrfs_transaction_cachep = kmem_cache_create("btrfs_transaction_cache", + sizeof(struct btrfs_transaction), 0, + SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL); if (!btrfs_transaction_cachep) goto fail; - btrfs_path_cachep = btrfs_cache_create("btrfs_path_cache", - sizeof(struct btrfs_path), - 0, NULL); + + btrfs_path_cachep = kmem_cache_create("btrfs_path_cache", + sizeof(struct btrfs_path), 0, + SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL); if (!btrfs_path_cachep) goto fail; - btrfs_bit_radix_cachep = btrfs_cache_create("btrfs_radix", 256, - SLAB_DESTROY_BY_RCU, NULL); + + btrfs_bit_radix_cachep = kmem_cache_create("btrfs_radix", 256, 0, + SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD | + SLAB_DESTROY_BY_RCU, NULL); if (!btrfs_bit_radix_cachep) goto fail; return 0; -- cgit v0.10.2 From e980b50cda1610f1c17978d9b7fd311a9dd93877 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 24 Apr 2009 14:39:24 -0400 Subject: Btrfs: fix fallocate deadlock on inode extent lock The btrfs fallocate call takes an extent lock on the entire range being fallocated, and then runs through insert_reserved_extent on each extent as they are allocated. The problem with this is that btrfs_drop_extents may decide to try and take the same extent lock fallocate was already holding. The solution used here is to push down knowledge of the range that is already locked going into btrfs_drop_extents. It turns out that at least one other caller had the same bug. Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 213535f..4414a5d 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2177,7 +2177,8 @@ int btrfs_check_file(struct btrfs_root *root, struct inode *inode); extern struct file_operations btrfs_file_operations; int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode, - u64 start, u64 end, u64 inline_limit, u64 *hint_block); + u64 start, u64 end, u64 locked_end, + u64 inline_limit, u64 *hint_block); int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode, u64 start, u64 end); diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 482f8db..da3ed96 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -363,15 +363,16 @@ out: */ noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode, - u64 start, u64 end, u64 inline_limit, u64 *hint_byte) + u64 start, u64 end, u64 locked_end, + u64 inline_limit, u64 *hint_byte) { u64 extent_end = 0; - u64 locked_end = end; u64 search_start = start; u64 leaf_start; u64 ram_bytes = 0; u64 orig_parent = 0; u64 disk_bytenr = 0; + u64 orig_locked_end = locked_end; u8 compression; u8 encryption; u16 other_encoding = 0; @@ -684,9 +685,9 @@ next_slot: } out: btrfs_free_path(path); - if (locked_end > end) { - unlock_extent(&BTRFS_I(inode)->io_tree, end, locked_end - 1, - GFP_NOFS); + if (locked_end > orig_locked_end) { + unlock_extent(&BTRFS_I(inode)->io_tree, orig_locked_end, + locked_end - 1, GFP_NOFS); } btrfs_check_file(root, inode); return ret; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 176b6cc..2fdb299 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -234,7 +234,7 @@ static noinline int cow_file_range_inline(struct btrfs_trans_handle *trans, } ret = btrfs_drop_extents(trans, root, inode, start, - aligned_end, start, &hint_byte); + aligned_end, aligned_end, start, &hint_byte); BUG_ON(ret); if (isize > actual_end) @@ -1439,6 +1439,7 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, struct inode *inode, u64 file_pos, u64 disk_bytenr, u64 disk_num_bytes, u64 num_bytes, u64 ram_bytes, + u64 locked_end, u8 compression, u8 encryption, u16 other_encoding, int extent_type) { @@ -1455,7 +1456,8 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, path->leave_spinning = 1; ret = btrfs_drop_extents(trans, root, inode, file_pos, - file_pos + num_bytes, file_pos, &hint); + file_pos + num_bytes, locked_end, + file_pos, &hint); BUG_ON(ret); ins.objectid = inode->i_ino; @@ -1590,6 +1592,8 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) ordered_extent->disk_len, ordered_extent->len, ordered_extent->len, + ordered_extent->file_offset + + ordered_extent->len, compressed, 0, 0, BTRFS_FILE_EXTENT_REG); BUG_ON(ret); @@ -2877,6 +2881,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t size) err = btrfs_drop_extents(trans, root, inode, cur_offset, cur_offset + hole_size, + block_end, cur_offset, &hint_byte); if (err) break; @@ -4968,7 +4973,7 @@ out_fail: static int prealloc_file_range(struct btrfs_trans_handle *trans, struct inode *inode, u64 start, u64 end, - u64 alloc_hint, int mode) + u64 locked_end, u64 alloc_hint, int mode) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_key ins; @@ -4989,7 +4994,8 @@ static int prealloc_file_range(struct btrfs_trans_handle *trans, ret = insert_reserved_file_extent(trans, inode, cur_offset, ins.objectid, ins.offset, ins.offset, - ins.offset, 0, 0, 0, + ins.offset, locked_end, + 0, 0, 0, BTRFS_FILE_EXTENT_PREALLOC); BUG_ON(ret); num_bytes -= ins.offset; @@ -5018,6 +5024,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, u64 alloc_start; u64 alloc_end; u64 alloc_hint = 0; + u64 locked_end; u64 mask = BTRFS_I(inode)->root->sectorsize - 1; struct extent_map *em; struct btrfs_trans_handle *trans; @@ -5039,6 +5046,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, goto out; } + locked_end = alloc_end - 1; while (1) { struct btrfs_ordered_extent *ordered; @@ -5051,8 +5059,8 @@ static long btrfs_fallocate(struct inode *inode, int mode, /* the extent lock is ordered inside the running * transaction */ - lock_extent(&BTRFS_I(inode)->io_tree, alloc_start, - alloc_end - 1, GFP_NOFS); + lock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end, + GFP_NOFS); ordered = btrfs_lookup_first_ordered_extent(inode, alloc_end - 1); if (ordered && @@ -5060,7 +5068,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, ordered->file_offset < alloc_end) { btrfs_put_ordered_extent(ordered); unlock_extent(&BTRFS_I(inode)->io_tree, - alloc_start, alloc_end - 1, GFP_NOFS); + alloc_start, locked_end, GFP_NOFS); btrfs_end_transaction(trans, BTRFS_I(inode)->root); /* @@ -5085,7 +5093,8 @@ static long btrfs_fallocate(struct inode *inode, int mode, last_byte = (last_byte + mask) & ~mask; if (em->block_start == EXTENT_MAP_HOLE) { ret = prealloc_file_range(trans, inode, cur_offset, - last_byte, alloc_hint, mode); + last_byte, locked_end + 1, + alloc_hint, mode); if (ret < 0) { free_extent_map(em); break; @@ -5101,7 +5110,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, break; } } - unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1, + unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end, GFP_NOFS); btrfs_end_transaction(trans, BTRFS_I(inode)->root); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 7594bec..f4e5d2e 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -830,7 +830,8 @@ static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, BUG_ON(!trans); /* punch hole in destination first */ - btrfs_drop_extents(trans, root, inode, off, off+len, 0, &hint_byte); + btrfs_drop_extents(trans, root, inode, off, off + len, + off + len, 0, &hint_byte); /* clone data */ key.objectid = src->i_ino; diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 25f20ea..db5e212 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -536,7 +536,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, saved_nbytes = inode_get_bytes(inode); /* drop any overlapping extents */ ret = btrfs_drop_extents(trans, root, inode, - start, extent_end, start, &alloc_hint); + start, extent_end, extent_end, start, &alloc_hint); BUG_ON(ret); if (found_type == BTRFS_FILE_EXTENT_REG || -- cgit v0.10.2 From 59bc5c758ece00fb0b2a170dd8fbbf31f1856c8a Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 24 Apr 2009 14:39:25 -0400 Subject: Btrfs: fix deadlocks and stalls on dead root removal After a transaction commit, the old root of the subvol btrees are sent through snapshot removal. This is what actually frees up any blocks replaced by COW, and anything the old blocks pointed to. Snapshot deletion will pause when a transaction commit has started, which helps to avoid a huge amount of delayed reference count updates piling up as the transaction is trying to close. But, this pause happens after the snapshot deletion process has asked other procs on the system to throttle back a bit so that it can make progress. We don't want to throttle everyone while we're waiting for the transaction commit, it leads to deadlocks in the user transaction ioctls used by Ceph and makes things slower in general. This patch changes things to avoid the throttling while we sleep. Signed-off-by: Chris Mason diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 2869b33..01b1436 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -687,7 +687,13 @@ static noinline int wait_transaction_pre_flush(struct btrfs_fs_info *info) prepare_to_wait(&info->transaction_wait, &wait, TASK_UNINTERRUPTIBLE); mutex_unlock(&info->trans_mutex); + + atomic_dec(&info->throttles); + wake_up(&info->transaction_throttle); + schedule(); + + atomic_inc(&info->throttles); mutex_lock(&info->trans_mutex); finish_wait(&info->transaction_wait, &wait); } -- cgit v0.10.2 From a9e817425dc0baede8ebe5fbc9984a640257432b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 24 Apr 2009 16:11:18 -0400 Subject: ext4: Ignore i_file_acl_high unless EXT4_FEATURE_INCOMPAT_64BIT is present Don't try to look at i_file_acl_high unless the INCOMPAT_64BIT feature bit is set. The field is normally zero, but older versions of e2fsck didn't automatically check to make sure of this, so in the spirit of "be liberal in what you accept", don't look at i_file_acl_high unless we are using a 64-bit filesystem. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index cab75bb..1146003 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4357,11 +4357,9 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) ei->i_flags = le32_to_cpu(raw_inode->i_flags); inode->i_blocks = ext4_inode_blocks(raw_inode, ei); ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo); - if (EXT4_SB(inode->i_sb)->s_es->s_creator_os != - cpu_to_le32(EXT4_OS_HURD)) { + if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT)) ei->i_file_acl |= ((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32; - } inode->i_size = ext4_isize(raw_inode); ei->i_disksize = inode->i_size; inode->i_generation = le32_to_cpu(raw_inode->i_generation); -- cgit v0.10.2 From e5b89542ea18020961882228c26db3ba87f6e608 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 23 Apr 2009 16:42:59 +0930 Subject: virtio-rng: Remove false BUG for spurious callbacks The virtio-rng drivers checks for spurious callbacks. Since callbacks can be implemented via shared interrupts (e.g. PCI) this could lead to guest kernel oopses with lots of virtio devices. Signed-off-by: Christian Borntraeger Cc: Rusty Russell Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index d0e563e..86e83f8 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -37,9 +37,9 @@ static void random_recv_done(struct virtqueue *vq) { int len; - /* We never get spurious callbacks. */ + /* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */ if (!vq->vq_ops->get_buf(vq, &len)) - BUG(); + return; data_left = len / sizeof(random_data[0]); complete(&have_data); -- cgit v0.10.2 From 91ac033d8377552d3654501a105ab55bf546940e Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Thu, 23 Apr 2009 11:21:55 +0100 Subject: CacheFiles: Fix the documentation to use the correct credential pointer names Adjust the CacheFiles documentation to use the correct names of the credential pointers in task_struct. The documentation was using names from the old versions of the credentials patches. Signed-off-by: Marc Dionne Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt index c78a49b..748a1ae 100644 --- a/Documentation/filesystems/caching/cachefiles.txt +++ b/Documentation/filesystems/caching/cachefiles.txt @@ -407,7 +407,7 @@ A NOTE ON SECURITY ================== CacheFiles makes use of the split security in the task_struct. It allocates -its own task_security structure, and redirects current->act_as to point to it +its own task_security structure, and redirects current->cred to point to it when it acts on behalf of another process, in that process's context. The reason it does this is that it calls vfs_mkdir() and suchlike rather than @@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what the process looks like in /proc. So CacheFiles makes use of a logical split in the security between the -objective security (task->sec) and the subjective security (task->act_as). The -objective security holds the intrinsic security properties of a process and is -never overridden. This is what appears in /proc, and is what is used when a +objective security (task->real_cred) and the subjective security (task->cred). +The objective security holds the intrinsic security properties of a process and +is never overridden. This is what appears in /proc, and is what is used when a process is the target of an operation by some other process (SIGKILL for example). -- cgit v0.10.2 From a5422a5111811401f7756345e4c237ff06cf6d1e Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Thu, 23 Apr 2009 16:40:32 +0300 Subject: lib: find_last_bit.o needed by a module only, move it from lib to obj Currently, although find_last_bit is EXPORTed, it is statically linked with the kernel and is referenced only under CONFIG_SMP. When CONFIG_SMP is undefined and find_last_bit is referenced only by modules, linking fails with: ERROR: "find_last_bit" [fs/nfs/nfs.ko] undefined! Cc: Rusty Russell Cc: Trond Myklebust Signed-off-by: Fred Isaman Signed-off-by: Benny Halevy Signed-off-by: Linus Torvalds diff --git a/lib/Makefile b/lib/Makefile index d6edd67..33a40e4 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -38,7 +38,7 @@ lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o lib-$(CONFIG_GENERIC_FIND_FIRST_BIT) += find_next_bit.o lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o -lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o +obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o -- cgit v0.10.2 From 84baf74bf23bbe9f3deafb5d2f27e2b5dc0bc052 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 23 Apr 2009 16:41:13 +0100 Subject: ROMFS: romfs_lookup() shouldn't be doing a partial name comparison romfs_lookup() should be using a routine akin to strcmp() on the backing store, rather than one akin to strncmp(). If it uses the latter, it's liable to match /bin/shutdown when looking up /bin/sh. Signed-off-by: David Howells Tested-by: Michal Simek Signed-off-by: Linus Torvalds diff --git a/fs/romfs/internal.h b/fs/romfs/internal.h index 06044a9..95217b8 100644 --- a/fs/romfs/internal.h +++ b/fs/romfs/internal.h @@ -43,5 +43,5 @@ extern int romfs_dev_read(struct super_block *sb, unsigned long pos, void *buf, size_t buflen); extern ssize_t romfs_dev_strnlen(struct super_block *sb, unsigned long pos, size_t maxlen); -extern int romfs_dev_strncmp(struct super_block *sb, unsigned long pos, - const char *str, size_t size); +extern int romfs_dev_strcmp(struct super_block *sb, unsigned long pos, + const char *str, size_t size); diff --git a/fs/romfs/storage.c b/fs/romfs/storage.c index 7e3e1e1..66ce9dd 100644 --- a/fs/romfs/storage.c +++ b/fs/romfs/storage.c @@ -67,26 +67,35 @@ static ssize_t romfs_mtd_strnlen(struct super_block *sb, * compare a string to one in a romfs image on MTD * - return 1 if matched, 0 if differ, -ve if error */ -static int romfs_mtd_strncmp(struct super_block *sb, unsigned long pos, - const char *str, size_t size) +static int romfs_mtd_strcmp(struct super_block *sb, unsigned long pos, + const char *str, size_t size) { - u_char buf[16]; + u_char buf[17]; size_t len, segment; int ret; - /* scan the string up to 16 bytes at a time */ + /* scan the string up to 16 bytes at a time, and attempt to grab the + * trailing NUL whilst we're at it */ + buf[0] = 0xff; + while (size > 0) { - segment = min_t(size_t, size, 16); + segment = min_t(size_t, size + 1, 17); ret = ROMFS_MTD_READ(sb, pos, segment, &len, buf); if (ret < 0) return ret; + len--; if (memcmp(buf, str, len) != 0) return 0; + buf[0] = buf[len]; size -= len; pos += len; str += len; } + /* check the trailing NUL was */ + if (buf[0]) + return 0; + return 1; } #endif /* CONFIG_ROMFS_ON_MTD */ @@ -154,28 +163,48 @@ static ssize_t romfs_blk_strnlen(struct super_block *sb, * compare a string to one in a romfs image on a block device * - return 1 if matched, 0 if differ, -ve if error */ -static int romfs_blk_strncmp(struct super_block *sb, unsigned long pos, - const char *str, size_t size) +static int romfs_blk_strcmp(struct super_block *sb, unsigned long pos, + const char *str, size_t size) { struct buffer_head *bh; unsigned long offset; size_t segment; - bool x; + bool matched, terminated = false; - /* scan the string up to 16 bytes at a time */ + /* compare string up to a block at a time */ while (size > 0) { offset = pos & (ROMBSIZE - 1); segment = min_t(size_t, size, ROMBSIZE - offset); bh = sb_bread(sb, pos >> ROMBSBITS); if (!bh) return -EIO; - x = (memcmp(bh->b_data + offset, str, segment) != 0); - brelse(bh); - if (x) - return 0; + matched = (memcmp(bh->b_data + offset, str, segment) == 0); + size -= segment; pos += segment; str += segment; + if (matched && size == 0 && offset + segment < ROMBSIZE) { + if (!bh->b_data[offset + segment]) + terminated = true; + else + matched = false; + } + brelse(bh); + if (!matched) + return 0; + } + + if (!terminated) { + /* the terminating NUL must be on the first byte of the next + * block */ + BUG_ON((pos & (ROMBSIZE - 1)) != 0); + bh = sb_bread(sb, pos >> ROMBSBITS); + if (!bh) + return -EIO; + matched = !bh->b_data[0]; + brelse(bh); + if (!matched) + return 0; } return 1; @@ -234,10 +263,12 @@ ssize_t romfs_dev_strnlen(struct super_block *sb, /* * compare a string to one in romfs + * - the string to be compared to, str, may not be NUL-terminated; instead the + * string is of the specified size * - return 1 if matched, 0 if differ, -ve if error */ -int romfs_dev_strncmp(struct super_block *sb, unsigned long pos, - const char *str, size_t size) +int romfs_dev_strcmp(struct super_block *sb, unsigned long pos, + const char *str, size_t size) { size_t limit; @@ -246,16 +277,16 @@ int romfs_dev_strncmp(struct super_block *sb, unsigned long pos, return -EIO; if (size > ROMFS_MAXFN) return -ENAMETOOLONG; - if (size > limit - pos) + if (size + 1 > limit - pos) return -EIO; #ifdef CONFIG_ROMFS_ON_MTD if (sb->s_mtd) - return romfs_mtd_strncmp(sb, pos, str, size); + return romfs_mtd_strcmp(sb, pos, str, size); #endif #ifdef CONFIG_ROMFS_ON_BLOCK if (sb->s_bdev) - return romfs_blk_strncmp(sb, pos, str, size); + return romfs_blk_strcmp(sb, pos, str, size); #endif return -EIO; } diff --git a/fs/romfs/super.c b/fs/romfs/super.c index 10ca7d9..c53b5ef 100644 --- a/fs/romfs/super.c +++ b/fs/romfs/super.c @@ -240,8 +240,8 @@ static struct dentry *romfs_lookup(struct inode *dir, struct dentry *dentry, goto error; /* try to match the first 16 bytes of name */ - ret = romfs_dev_strncmp(dir->i_sb, offset + ROMFH_SIZE, name, - len); + ret = romfs_dev_strcmp(dir->i_sb, offset + ROMFH_SIZE, name, + len); if (ret < 0) goto error; if (ret == 1) -- cgit v0.10.2 From 4b2b0b9753194cad44d7295c32044b89710efd70 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 23 Apr 2009 16:41:18 +0100 Subject: ROMFS: Advance destination buffer pointer when reading from a blockdev RomFS should advance the destination buffer pointer when reading data from a blockdev source (the data may be split over multiple blocks, each requiring its own sb_read() call). Without this, all the data is copied to the beginning of the output buffer. Signed-off-by: David Howells Tested-by: Michal Simek Signed-off-by: Linus Torvalds diff --git a/fs/romfs/storage.c b/fs/romfs/storage.c index 66ce9dd..b3208ad 100644 --- a/fs/romfs/storage.c +++ b/fs/romfs/storage.c @@ -120,6 +120,7 @@ static int romfs_blk_read(struct super_block *sb, unsigned long pos, return -EIO; memcpy(buf, bh->b_data + offset, segment); brelse(bh); + buf += segment; buflen -= segment; pos += segment; } -- cgit v0.10.2 From 6b9ff696ba1176b6fca78d01fc590dd4335c8743 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 24 Apr 2009 12:01:47 -0700 Subject: Input: lifebook - add DMI entry for Fujitsu B-2130 Although we already have entry for ZEPHYR the match is done on product name whereas B-2130 BIOS has it in board name. Reported-by: Yuriy Zhuravlev Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index df81b0a..15ac320 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -61,6 +61,12 @@ static const struct dmi_system_id lifebook_dmi_table[] = { }, }, { + .ident = "Lifebook B-2130", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"), + }, + }, + { .ident = "Lifebook B213x/B2150", .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"), -- cgit v0.10.2 From 0c8454f56623505a99463405fd7d5664adfbb094 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 25 Apr 2009 00:16:06 +0200 Subject: PM/Hibernate: Fix waiting for image device to appear on resume Commit c751085943362143f84346d274e0011419c84202 ("PM/Hibernate: Wait for SCSI devices scan to complete during resume") added a call to scsi_complete_async_scans() to software_resume(), so that it waited for the SCSI scanning to complete, but the call was added at a wrong place. Namely, it should have been added after wait_for_device_probe(), which is called only if the image partition hasn't been specified yet. Also, it's reasonable to check if the image partition is present and only wait for the device probing and SCSI scanning to complete if it is not the case. Additionally, since noresume is checked right at the beginning of software_resume() and the function returns immediately if it's set, it doesn't make sense to check it once again later. Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds diff --git a/kernel/power/disk.c b/kernel/power/disk.c index 0854770..e71ca9c 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -646,13 +646,6 @@ static int software_resume(void) return 0; /* - * We can't depend on SCSI devices being available after loading one of - * their modules if scsi_complete_async_scans() is not called and the - * resume device usually is a SCSI one. - */ - scsi_complete_async_scans(); - - /* * name_to_dev_t() below takes a sysfs buffer mutex when sysfs * is configured into the kernel. Since the regular hibernate * trigger path is via sysfs which takes a buffer mutex before @@ -663,32 +656,42 @@ static int software_resume(void) * here to avoid lockdep complaining. */ mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING); + + if (swsusp_resume_device) + goto Check_image; + + if (!strlen(resume_file)) { + error = -ENOENT; + goto Unlock; + } + + pr_debug("PM: Checking image partition %s\n", resume_file); + + /* Check if the device is there */ + swsusp_resume_device = name_to_dev_t(resume_file); if (!swsusp_resume_device) { - if (!strlen(resume_file)) { - mutex_unlock(&pm_mutex); - return -ENOENT; - } /* * Some device discovery might still be in progress; we need * to wait for this to finish. */ wait_for_device_probe(); + /* + * We can't depend on SCSI devices being available after loading + * one of their modules until scsi_complete_async_scans() is + * called and the resume device usually is a SCSI one. + */ + scsi_complete_async_scans(); + swsusp_resume_device = name_to_dev_t(resume_file); - pr_debug("PM: Resume from partition %s\n", resume_file); - } else { - pr_debug("PM: Resume from partition %d:%d\n", - MAJOR(swsusp_resume_device), - MINOR(swsusp_resume_device)); + if (!swsusp_resume_device) { + error = -ENODEV; + goto Unlock; + } } - if (noresume) { - /** - * FIXME: If noresume is specified, we need to find the - * partition and reset it back to normal swap space. - */ - mutex_unlock(&pm_mutex); - return 0; - } + Check_image: + pr_debug("PM: Resume from partition %d:%d\n", + MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device)); pr_debug("PM: Checking hibernation image.\n"); error = swsusp_check(); -- cgit v0.10.2 From c4b5a614316c505922a522b2e35ba05ea3e08a7c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 24 Apr 2009 18:45:35 -0400 Subject: ext4: Do not try to validate extents on special files The EXTENTS_FL flag should never be set on special files, but if it is, don't bother trying to validate that the extents tree is valid, since only files, directories, and non-fast symlinks will ever have an extent data structure. We perhaps should flag the filesystem as being corrupted if we see a special file (named pipes, device nodes, Unix domain sockets, etc.) with the EXTENTS_FL flag, but e2fsck doesn't currently check this case, so we'll just ignore this for now, since it's harmless. Without this fix, a special device with the extents flag is flagged as an error by the kernel, so it is impossible to access or delete the inode, but e2fsck doesn't see it as a problem, leading to confused/frustrated users. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 1146003..e91f978 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4407,6 +4407,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) (__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32; } + ret = 0; if (ei->i_file_acl && ((ei->i_file_acl < (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) + @@ -4418,8 +4419,11 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) ret = -EIO; goto bad_inode; } else if (ei->i_flags & EXT4_EXTENTS_FL) { - /* Validate extent which is part of inode */ - ret = ext4_ext_check_inode(inode); + if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || + (S_ISLNK(inode->i_mode) && + !ext4_inode_is_fast_symlink(inode))) + /* Validate extent which is part of inode */ + ret = ext4_ext_check_inode(inode); } else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || (S_ISLNK(inode->i_mode) && !ext4_inode_is_fast_symlink(inode))) { -- cgit v0.10.2 From adc667e84f086aa110d810f3476c494e48eaabaa Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Sat, 25 Apr 2009 18:03:35 -0700 Subject: vlan: update vlan carrier state for admin up/down Currently, the VLAN event handler does not adjust the VLAN device's carrier state when the real device or the VLAN device is set administratively up or down. The following patch adds a transfer of operating state from the real device to the VLAN device when the real device is administratively set up or down, and sets the carrier state up or down during init, open and close of the VLAN device. This permits observers above the VLAN device that care about the carrier state (bonding's link monitor, for example) to receive updates for administrative changes by more closely mimicing the behavior of real devices. Signed-off-by: Jay Vosburgh Signed-off-by: Patrick McHardy diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 2b7390e..d1e1054 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -492,6 +492,7 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event, continue; dev_change_flags(vlandev, flgs & ~IFF_UP); + vlan_transfer_operstate(dev, vlandev); } break; @@ -507,6 +508,7 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event, continue; dev_change_flags(vlandev, flgs | IFF_UP); + vlan_transfer_operstate(dev, vlandev); } break; diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 6b09213..b4b9068 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -462,6 +462,7 @@ static int vlan_dev_open(struct net_device *dev) if (vlan->flags & VLAN_FLAG_GVRP) vlan_gvrp_request_join(dev); + netif_carrier_on(dev); return 0; clear_allmulti: @@ -471,6 +472,7 @@ del_unicast: if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr)) dev_unicast_delete(real_dev, dev->dev_addr, ETH_ALEN); out: + netif_carrier_off(dev); return err; } @@ -492,6 +494,7 @@ static int vlan_dev_stop(struct net_device *dev) if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr)) dev_unicast_delete(real_dev, dev->dev_addr, dev->addr_len); + netif_carrier_off(dev); return 0; } @@ -612,6 +615,8 @@ static int vlan_dev_init(struct net_device *dev) struct net_device *real_dev = vlan_dev_info(dev)->real_dev; int subclass = 0; + netif_carrier_off(dev); + /* IFF_BROADCAST|IFF_MULTICAST; ??? */ dev->flags = real_dev->flags & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI); dev->iflink = real_dev->ifindex; -- cgit v0.10.2 From 5876ee950f28612814cc4e01c5549718f8b79dce Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Apr 2009 13:56:01 +0100 Subject: [ARM] lart: fix build error arch/arm/mach-sa1100/lart.c:36: error: 'PAGE_SHIFT' undeclared here (not in a function) Signed-off-by: Russell King diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 0cd5269..1f940df 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From c80d471a476b6d6fe0bc1fd25293c24c66b7aaaf Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:56 -0400 Subject: Add new HEAD_TEXT_SECTION macro. This patch is preparation for replacing all uses of ".head.text" or ".text.head" in the kernel with macros, so that the section name can later be changed without having to touch a lot of the kernel. Since some linker scripts do more complex things than referencing HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the actual name. I've defined HEAD_TEXT_SECTION in a new header, include/linux/section-names.h, so that this section name only needs to appear in one place. I anticipate creating similar macro structures for a number of other section names. The long-term goal here is to be able to change the kernel's magic section names to those that are compatible with -ffunction-sections -fdata-sections. This requires renaming all magic sections with names of the form ".text.foo". Signed-off-by: Tim Abbott Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 7fa660f..eaa06ef 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -1,3 +1,5 @@ +#include + #ifndef LOAD_OFFSET #define LOAD_OFFSET 0 #endif @@ -331,7 +333,7 @@ #endif /* Section used for early init (in .S files) */ -#define HEAD_TEXT *(.head.text) +#define HEAD_TEXT *(HEAD_TEXT_SECTION) /* init and exit section handling */ #define INIT_DATA \ diff --git a/include/linux/init.h b/include/linux/init.h index f121a7a..20a1334 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -2,6 +2,8 @@ #define _LINUX_INIT_H #include +#include +#include /* These macros are used to mark some functions or * initialized data (doesn't apply to uninitialized data) @@ -107,7 +109,7 @@ #define __memexitconst __section(.memexit.rodata) /* For assembly routines */ -#define __HEAD .section ".head.text","ax" +#define __HEAD .section __stringify(HEAD_TEXT_SECTION),"ax" #define __INIT .section ".init.text","ax" #define __FINIT .previous diff --git a/include/linux/section-names.h b/include/linux/section-names.h new file mode 100644 index 0000000..c956f4e --- /dev/null +++ b/include/linux/section-names.h @@ -0,0 +1,6 @@ +#ifndef __LINUX_SECTION_NAMES_H +#define __LINUX_SECTION_NAMES_H + +#define HEAD_TEXT_SECTION .head.text + +#endif /* !__LINUX_SECTION_NAMES_H */ -- cgit v0.10.2 From 0ebdcb4d0480d1b8219cf5f9eab0fb5d889af0ad Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:57 -0400 Subject: xtensa: convert to use __HEAD and HEAD_TEXT macros. Signed-off-by: Tim Abbott Cc: Chris Zankel Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 0817f9d..d9ddc1b 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -19,6 +19,7 @@ #include #include +#include #include /* @@ -45,7 +46,7 @@ * instruction. */ - .section .head.text, "ax" + __HEAD .globl _start _start: _j 2f .align 4 diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index c1be9a4..5accf51 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -85,8 +85,8 @@ SECTIONS .text : { - /* The .head.text section must be the first section! */ - *(.head.text) + /* The HEAD_TEXT section must be the first section! */ + HEAD_TEXT *(.literal .text) VMLINUX_SYMBOL(__sched_text_start) = .; *(.sched.literal .sched.text) -- cgit v0.10.2 From 92ca52343ca503c1f957bd649df4ef914d5fc1e8 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:58 -0400 Subject: alpha: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Richard Henderson Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/alpha/kernel/head.S b/arch/alpha/kernel/head.S index 7ac1f13..4bdd1d2 100644 --- a/arch/alpha/kernel/head.S +++ b/arch/alpha/kernel/head.S @@ -7,10 +7,11 @@ * the kernel global pointer and jump to the kernel entry-point. */ +#include #include #include -.section .text.head, "ax" +__HEAD .globl swapper_pg_dir .globl _stext swapper_pg_dir=SWAPPER_PGD diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index ef37fc1..b9d6568 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -16,7 +16,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v0.10.2 From b6a8d95c95814079ded93c14c4b394015d8b65cd Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:59 -0400 Subject: frv: convert frv to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/frv/kernel/head.S b/arch/frv/kernel/head.S index fecf751..b825ef3 100644 --- a/arch/frv/kernel/head.S +++ b/arch/frv/kernel/head.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -27,7 +28,7 @@ # command line string # ############################################################################### - .section .text.head,"ax" + __HEAD .balign 4 .globl _boot, __head_reference diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index b95c4ea..22d9787 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -26,7 +26,7 @@ SECTIONS _sinittext = .; .init.text : { - *(.text.head) + HEAD_TEXT #ifndef CONFIG_DEBUG_INFO INIT_TEXT EXIT_TEXT -- cgit v0.10.2 From 34963696629b6d1e0066a5f2e67993e409c9434b Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:02 -0400 Subject: m32r: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Hirokazu Takata Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S index 9091606..0a71944 100644 --- a/arch/m32r/kernel/head.S +++ b/arch/m32r/kernel/head.S @@ -23,7 +23,7 @@ __INITDATA /* * References to members of the boot_cpu_data structure. */ -.section .text.head, "ax" +__HEAD .global start_kernel .global __bss_start .global _end diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 9db05df..4179adf 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -27,7 +27,7 @@ SECTIONS _text = .; /* Text and read-only data */ .boot : { *(.boot) } = 0 .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v0.10.2 From 6f335cab0431d5df4995bcd4fd952d4c746d5a86 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:03 -0400 Subject: m68k: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Geert Uytterhoeven Cc: Roman Zippel Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index f513f53..86edb5f 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -577,7 +577,7 @@ func_define putn,1 #endif .endm -.section ".text.head","ax" +__HEAD ENTRY(_stext) /* * Version numbers of the bootinfo interface diff --git a/arch/m68k/kernel/sun3-head.S b/arch/m68k/kernel/sun3-head.S index aad0159..9e5c3e5 100644 --- a/arch/m68k/kernel/sun3-head.S +++ b/arch/m68k/kernel/sun3-head.S @@ -29,7 +29,7 @@ kernel_pmd_table: .skip 0x2000 .globl kernel_pg_dir .equ kernel_pg_dir,kernel_pmd_table - .section .text.head + __HEAD ENTRY(_stext) ENTRY(_start) diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index f846d4e..01d212b 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -12,7 +12,7 @@ SECTIONS . = 0x1000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index d9368c0..c192f77 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -12,7 +12,7 @@ SECTIONS . = 0xE002000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v0.10.2 From 9760f8fc60766f8fde0ef5cf7df714c2ce864ab6 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:04 -0400 Subject: mn10300: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index 8a8309f..14f27f3 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -9,6 +9,7 @@ * 2 of the Licence, or (at your option) any later version. */ +#include #include #include #include @@ -19,7 +20,7 @@ #include #include - .section .text.head,"ax" + __HEAD ############################################################################### # diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index b825966..24de6b9 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -27,10 +27,7 @@ SECTIONS _stext = .; _text = .; /* Text and read-only data */ .text : { - *( - .text.head - .text - ) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v0.10.2 From e70398458738fd26f96adc95eea8efe908809f08 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:05 -0400 Subject: powerpc: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Benjamin Herrenschmidt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 54e68c1..c01467f 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -21,6 +21,7 @@ * */ +#include #include #include #include @@ -50,7 +51,7 @@ mtspr SPRN_DBAT##n##L,RB; \ 1: - .section .text.head, "ax" + __HEAD .stabs "arch/powerpc/kernel/",N_SO,0,0,0f .stabs "head_32.S",N_SO,0,0,0f 0: diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 56d8e5d..0c96911 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -31,6 +31,7 @@ * */ +#include #include #include #include @@ -52,7 +53,7 @@ * * This is all going to change RSN when we add bi_recs....... -- Dan */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index b56fecc..18d8a16 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -28,6 +28,7 @@ * option) any later version. */ +#include #include #include #include @@ -50,7 +51,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); /* diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 3c9452d..52ff8c5 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -19,6 +19,7 @@ * */ +#include #include #include #include @@ -38,7 +39,7 @@ #else #define DO_8xx_CPU6(val, reg) #endif - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 4c22620..5bdcc06 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -30,6 +30,7 @@ * option) any later version. */ +#include #include #include #include @@ -53,7 +54,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); /* diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index b9ef164..d7425ff 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -52,7 +52,7 @@ SECTIONS /* Text and gots */ .text : AT(ADDR(.text) - LOAD_OFFSET) { ALIGN_FUNCTION(); - *(.text.head) + HEAD_TEXT _text = .; *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*) SCHED_TEXT -- cgit v0.10.2 From 2133bb8d8c691c08d47f16d5971ba98f0ac241bf Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:06 -0400 Subject: s390: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Martin Schwidefsky Cc: Heiko Carstens Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index bba1449..22596d7 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -23,6 +23,7 @@ * */ +#include #include #include #include @@ -35,7 +36,7 @@ #define ARCH_OFFSET 0 #endif -.section ".text.head","ax" +__HEAD #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 7a2063e..89399b8 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -29,8 +29,8 @@ SECTIONS . = 0x00000000; .text : { _text = .; /* Text and read-only data */ - *(.text.head) - TEXT_TEXT + HEAD_TEXT + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v0.10.2 From bbe215c231ac809e42b037345c1fa8e8eb09b00a Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:07 -0400 Subject: sh: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Paul Mundt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S index 788605f..a78be74 100644 --- a/arch/sh/kernel/head_32.S +++ b/arch/sh/kernel/head_32.S @@ -10,6 +10,7 @@ * * Head.S contains the SH exception handlers and startup code. */ +#include #include #include @@ -40,7 +41,7 @@ ENTRY(empty_zero_page) 1: .skip PAGE_SIZE - empty_zero_page - 1b - .section .text.head, "ax" + __HEAD /* * Condition at the entry of _stext: diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S index 7ccfb99..3ea7658 100644 --- a/arch/sh/kernel/head_64.S +++ b/arch/sh/kernel/head_64.S @@ -8,6 +8,9 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ + +#include + #include #include #include @@ -110,7 +113,7 @@ empty_bad_pte_table: fpu_in_use: .quad 0 - .section .text.head, "ax" + __HEAD .balign L1_CACHE_BYTES /* * Condition at the entry of __stext: diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S index d0b2a71..dd9b2ee 100644 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -31,7 +31,7 @@ SECTIONS } = 0 .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S index 33fa464..6966446 100644 --- a/arch/sh/kernel/vmlinux_64.lds.S +++ b/arch/sh/kernel/vmlinux_64.lds.S @@ -42,7 +42,7 @@ SECTIONS } = 0 .text : C_PHYS(.text) { - *(.text.head) + HEAD_TEXT TEXT_TEXT *(.text64) *(.text..SHmedia32) -- cgit v0.10.2 From ce8a7424d23a36f043d0de8484f888971c831119 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:08 -0400 Subject: sparc: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: David S. Miller Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S index f0b4b51..e91f01a 100644 --- a/arch/sparc/kernel/head_32.S +++ b/arch/sparc/kernel/head_32.S @@ -72,7 +72,7 @@ sun4e_notsup: .align 4 /* The Sparc trap table, bootloader gives us control at _start. */ - .section .text.head,"ax" + __HEAD .globl start, _stext, _start, __stext .globl trapbase _start: /* danger danger */ diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index 7626708..fcbbd00 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -41,7 +41,7 @@ SECTIONS .text TEXTSTART : { _text = .; - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v0.10.2 From 992d7ced75322307035a0e94074eb7188612a680 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 24 Apr 2009 23:10:06 +0800 Subject: locking: Documentation: lockdep-design.txt, fix note of state bits From source code of get_usage_char(), the previous note is not correct, so fix it. static char get_usage_char(struct lock_class *class, enum lock_usage_bit bit) { char c = '.'; if (class->usage_mask & lock_flag(bit + 2))/*LOCK_ENABLED_##STATE*/ c = '+'; if (class->usage_mask & lock_flag(bit)) {/*LOCK_USED_IN_##STATE*/ c = '-'; if (class->usage_mask & lock_flag(bit + 2)) c = '?'; } return c; } note: 1) The 'bit' parameter always is passed as LOCK_USED_IN_##STATE or LOCK_USED_IN_##STATE_READ , from get_usage_chars(). Signed-off-by: Ming Lei LKML-Reference: <1240585806-5744-1-git-send-email-tom.leiming@gmail.com> Signed-off-by: Ingo Molnar diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt index 938ea22..e20d913 100644 --- a/Documentation/lockdep-design.txt +++ b/Documentation/lockdep-design.txt @@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example: The bit position indicates STATE, STATE-read, for each of the states listed above, and the character displayed in each indicates: - '.' acquired while irqs disabled - '+' acquired in irq context - '-' acquired with irqs enabled + '.' acquired while irqs disabled and not in irq context + '-' acquired in irq context + '+' acquired with irqs enabled '?' acquired in irq context with irqs enabled. Unused mutexes cannot be part of the cause of an error. -- cgit v0.10.2 From 314eeac9e35d8b934dd7a09ed3a8e00d41977b84 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 24 Apr 2009 14:35:57 +0200 Subject: dma-debug: remove broken dma memory leak detection for 2.6.30 The feature needs some more work because the notfier which is used to check for pending allocations is called before the device drivers ->remove() function. Therefore this feature reports false positives. A real fix for this issue is to introduce a new notifier event which sent _after_ the driver has deinitialized itself. That will done for the next kernel version. [ Impact: reduce the scope of CONFIG_DMA_API_DEBUG=y checks ] Signed-off-by: Joerg Roedel Cc: iommu@lists.linux-foundation.org LKML-Reference: <1240576557-22442-1-git-send-email-joerg.roedel@amd.com> Signed-off-by: Ingo Molnar diff --git a/lib/dma-debug.c b/lib/dma-debug.c index d3da7ed..69da09a 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -400,60 +400,9 @@ out_err: return -ENOMEM; } -static int device_dma_allocations(struct device *dev) -{ - struct dma_debug_entry *entry; - unsigned long flags; - int count = 0, i; - - for (i = 0; i < HASH_SIZE; ++i) { - spin_lock_irqsave(&dma_entry_hash[i].lock, flags); - list_for_each_entry(entry, &dma_entry_hash[i].list, list) { - if (entry->dev == dev) - count += 1; - } - spin_unlock_irqrestore(&dma_entry_hash[i].lock, flags); - } - - return count; -} - -static int dma_debug_device_change(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct device *dev = data; - int count; - - - switch (action) { - case BUS_NOTIFY_UNBIND_DRIVER: - count = device_dma_allocations(dev); - if (count == 0) - break; - err_printk(dev, NULL, "DMA-API: device driver has pending " - "DMA allocations while released from device " - "[count=%d]\n", count); - break; - default: - break; - } - - return 0; -} - void dma_debug_add_bus(struct bus_type *bus) { - struct notifier_block *nb; - - nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL); - if (nb == NULL) { - printk(KERN_ERR "dma_debug_add_bus: out of memory\n"); - return; - } - - nb->notifier_call = dma_debug_device_change; - - bus_register_notifier(bus, nb); + /* FIXME: register notifier */ } /* -- cgit v0.10.2 From 40f4a6d522e68a0203ebefb57f3cbdac4a622169 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 22 Apr 2009 10:50:19 +0000 Subject: sh: sh7785lcr: fix defconfig for 29-bit mode Fix the problem that cannot work 29-bit mode when use sh7785lcr_defconfig. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index 8a42bbe..e4fac2e 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:15:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 19:17:56 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -79,6 +80,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -106,6 +109,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -118,7 +123,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -166,6 +170,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -175,8 +180,6 @@ CONFIG_CPU_SUBTYPE_SH7785=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -186,38 +189,31 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 -# CONFIG_29BIT is not set -CONFIG_32BIT=y -CONFIG_PMB_ENABLE=y -# CONFIG_PMB is not set -CONFIG_PMB_FIXED=y +CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y # CONFIG_NUMA is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_MAX_ACTIVE_REGIONS=2 +CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -249,6 +245,7 @@ CONFIG_CPU_HAS_FPU=y # # CONFIG_SH_HIGHLANDER is not set CONFIG_SH_SH7785LCR=y +CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y # # Timer and clock configuration @@ -672,6 +669,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -1009,15 +1007,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1218,6 +1218,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1240,6 +1241,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1289,6 +1295,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1377,6 +1384,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1413,6 +1423,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1422,9 +1433,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1542,6 +1558,7 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines -- cgit v0.10.2 From 6b3480855aad6e22ca90981a4c7893a7f41ffb47 Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Sat, 25 Apr 2009 20:43:18 +0000 Subject: maple: input: fix up maple mouse driver The maple mouse driver currently in mainline is broken: bash-3.1# modprobe maplemouse [ 56.886378] input: Dreamcast Mouse as /devices/virtual/input/input3 [ 56.918379] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 56.930543] pc = c003304e [ 56.934973] *pde = 00000000 [ 56.944948] Oops: 0000 [#1] [ 56.947867] Modules linked in: maplemouse(+) [ 56.952353] [ 56.953921] Pid : 1157, Comm: \0x09\0x09modprobe [ 56.958021] CPU : 0 \0x09\0x09Not tainted (2.6.30-rc2-00130-g3e98f9f #1) [ 56.958052] [ 56.966567] PC is at dc_mouse_open+0xe/0x40 [maplemouse] [ 56.972125] PR is at input_open_device+0x8a/0xc0 [ 56.976944] PC : c003304e SP : 8c88bdcc SR : 40008100 TEA : c0033834 [ 56.983854] R0 : 000006c4 R1 : 00000000 R2 : 40008101 R3 : 00000000 [ 56.990744] R4 : 8c8db800 R5 : c0033080 R6 : 00000005 R7 : 00000200 [ 56.997635] R8 : 8c8db800 R9 : 8c8dbe3c R10 : 00000000 R11 : 8c98881c [ 57.004525] R12 : 8c8dbe64 R13 : 8ca50140 R14 : 8c88bdd4 [ 57.010063] MACH: 00000497 MACL: 00000348 GBR : 29674440 PR : 8c1b4d0a [ 57.016939] ... Here is a fix for this, keeping an open and close, so reducing the load on the system when the mouse is not in use, and also properly referencing the maple device buffer following the recent update. Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c index d196abf..5f27817 100644 --- a/drivers/input/mouse/maplemouse.c +++ b/drivers/input/mouse/maplemouse.c @@ -2,8 +2,8 @@ * SEGA Dreamcast mouse driver * Based on drivers/usb/usbmouse.c * - * Copyright Yaegashi Takeshi, 2001 - * Adrian McMenamin, 2008 + * Copyright (c) Yaegashi Takeshi, 2001 + * Copyright (c) Adrian McMenamin, 2008 - 2009 */ #include @@ -29,7 +29,7 @@ static void dc_mouse_callback(struct mapleq *mq) struct maple_device *mapledev = mq->dev; struct dc_mouse *mse = maple_get_drvdata(mapledev); struct input_dev *dev = mse->dev; - unsigned char *res = mq->recvbuf; + unsigned char *res = mq->recvbuf->buf; buttons = ~res[8]; relx = *(unsigned short *)(res + 12) - 512; @@ -47,7 +47,7 @@ static void dc_mouse_callback(struct mapleq *mq) static int dc_mouse_open(struct input_dev *dev) { - struct dc_mouse *mse = dev->dev.platform_data; + struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev)); maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50, MAPLE_FUNC_MOUSE); @@ -57,29 +57,33 @@ static int dc_mouse_open(struct input_dev *dev) static void dc_mouse_close(struct input_dev *dev) { - struct dc_mouse *mse = dev->dev.platform_data; + struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev)); maple_getcond_callback(mse->mdev, dc_mouse_callback, 0, MAPLE_FUNC_MOUSE); } - +/* allow the mouse to be used */ static int __devinit probe_maple_mouse(struct device *dev) { struct maple_device *mdev = to_maple_dev(dev); struct maple_driver *mdrv = to_maple_driver(dev->driver); + int error; struct input_dev *input_dev; struct dc_mouse *mse; - int error; mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL); - input_dev = input_allocate_device(); - - if (!mse || !input_dev) { + if (!mse) { error = -ENOMEM; goto fail; } + input_dev = input_allocate_device(); + if (!input_dev) { + error = -ENOMEM; + goto fail_nomem; + } + mse->dev = input_dev; mse->mdev = mdev; @@ -89,25 +93,24 @@ static int __devinit probe_maple_mouse(struct device *dev) BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) | BIT_MASK(REL_WHEEL); - input_dev->name = mdev->product_name; - input_dev->id.bustype = BUS_HOST; input_dev->open = dc_mouse_open; input_dev->close = dc_mouse_close; + input_dev->name = mdev->product_name; + input_dev->id.bustype = BUS_HOST; + error = input_register_device(input_dev); + if (error) + goto fail_register; mdev->driver = mdrv; maple_set_drvdata(mdev, mse); - error = input_register_device(input_dev); - if (error) - goto fail; - - return 0; + return error; -fail: +fail_register: input_free_device(input_dev); - maple_set_drvdata(mdev, NULL); +fail_nomem: kfree(mse); - mdev->driver = NULL; +fail: return error; } -- cgit v0.10.2 From a8f6faebaf5b3f0f56b7c12a4f99d97c56938b37 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 21 Apr 2009 14:39:07 +0800 Subject: [ARM] pxa: fix issue of muxed GPIO irq_chip functions touching non-muxed GPIOs pxa_gpio_irq_type() and pxa_unmask_muxed_gpio() will touch non-muxed GPIOs (0 and 1 on PXA2xx/PXA3xx) bits in GRERx and GFERx, which is incorrect. Actually, only those bits should get updated if the corresponding bits are set in c->irq_mask as well. Fix this by updating only those relevant bits. Reported-and-tested-by: Daniel Ribeiro Signed-off-by: Eric Miao diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index af819bf..abc79d4 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end) return -ENOMEM; } + memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; @@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end) return 0; } +/* Update only those GRERx and GFERx edge detection register bits if those + * bits are set in c->irq_mask + */ +static inline void update_edge_detect(struct pxa_gpio_chip *c) +{ + uint32_t grer, gfer; + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; + grer |= c->irq_edge_rise & c->irq_mask; + gfer |= c->irq_edge_fall & c->irq_mask; + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); +} + static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { struct pxa_gpio_chip *c; @@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) else c->irq_edge_fall &= ~mask; - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), @@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq) struct pxa_gpio_chip *c = gpio_to_chip(gpio); c->irq_mask |= GPIO_bit(gpio); - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); } static struct irq_chip pxa_muxed_gpio_chip = { -- cgit v0.10.2 From fd87e081723089cba99df0b3d6f36ae2235c700a Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 16 Apr 2009 11:23:08 +0200 Subject: [ARM] pxa: remove duplicate select statements from Kconfig ARCH_PXA selects HAVE_CLK and COMMON_CLKDEV twice in arch/arm/Kconfig. Remove the second entry. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Eric Miao diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893..9909a93 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -486,8 +486,6 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT -- cgit v0.10.2 From 36b5437f33fb95196bef2345dede39fdcab3e431 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 17 Apr 2009 11:37:10 +0200 Subject: [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol cpufreq drivers for pxa2xx/3xx are now built-in automatically as soon as CPU_FREQ is enabled. Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9909a93..fb667cd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1169,12 +1169,6 @@ config CPU_FREQ_IMX If in doubt, say N. -config CPU_FREQ_PXA - bool - depends on CPU_FREQ && ARCH_PXA && PXA25x - default y - select CPU_FREQ_DEFAULT_GOV_USERSPACE - endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 30f463d..6ab5dd5 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PXA=y # # Floating point emulation -- cgit v0.10.2 From 3e36c0deea118e277f4ff9fa947bcde5f88426ca Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 6 Feb 2009 16:49:23 +0800 Subject: [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index cdf21dd..930e364 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = { .num_chipselect = 3, }; +static void corgi_wait_for_hsync(void) +{ + while (gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data corgi_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = CORGI_GPIO_TP_INT, + .wait_for_sync = corgi_wait_for_hsync, }; static void corgi_ads7846_cs(u32 command) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 8c61dda..c18e34a 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = { .num_chipselect = 3, }; +static void spitz_wait_for_hsync(void) +{ + while (gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data spitz_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = SPITZ_GPIO_TP_INT, + .wait_for_sync = spitz_wait_for_hsync, }; static void spitz_ads7846_cs(u32 command) -- cgit v0.10.2 From 15fbc938576175eeb53798221f045d4ace52e5dc Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 22 Apr 2009 18:34:36 +0800 Subject: [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working GPIO17_SDATA_IN_1 and GPIO36_SDATA_IN_1 are originally designed for the 2nd codec but unused on the board, yet they are initialized incorrectly by the bootloader as the SDATA_IN_1 alternate function, thus causing AC97 fail to work. Fix this issue by configuring these pins as normal GPIO to avoid the noise from these pins being treated as signals from the 2nd codec. Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index c1f7320..e99555b 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO25_AC97_SDATA_IN_0, GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO91_SSP3_SCLK, diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 4e1c488..cc5a228 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO38_AC97_SYNC, GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO89_SSP3_SCLK, -- cgit v0.10.2 From b49e385fc7cb4e6ed4206dfdab2b2579c5076120 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 22 Apr 2009 18:38:40 +0800 Subject: [ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index e99555b..c256c57 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -127,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* GPIO */ + GPIO18_GPIO, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { -- cgit v0.10.2 From fc76132b1e72efe45b5a5a693caadd54c3037f55 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 13 Apr 2009 11:06:49 +0800 Subject: [ARM] pxa/littleton: add missing da9034 touchscreen support Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index e13f6a8..c872b9f 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = { }, }; +static struct da9034_touch_pdata littleton_da9034_touch = { + .x_inverted = 1, + .interval_ms = 20, +}; + static struct da903x_subdev_info littleton_da9034_subdevs[] = { { .name = "da903x-led", @@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = { }, { .name = "da903x-backlight", .id = DA9034_ID_WLED, + }, { + .name = "da9034-touch", + .id = DA9034_ID_TOUCH, + .platform_data = &littleton_da9034_touch, }, }; -- cgit v0.10.2 From ecd4ca52bfdb4108f47aa480781b97f037051a72 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 27 Apr 2009 17:05:38 +0900 Subject: sh: Fix up unsigned syscall_nr in SH-5 pt_regs. syscall_nr is presently defined as unsigned in the SH-5 pt_regs, while the syscall restarting code wants it to be signed. Fix this up, and bring it in line with the other SH parts. Reported-by: Roel Kluin Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index d3f6caa..68e20ff 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -9,7 +9,7 @@ struct pt_regs { unsigned long long pc; unsigned long long sr; - unsigned long long syscall_nr; + long long syscall_nr; unsigned long long regs[63]; unsigned long long tregs[8]; unsigned long long pad[2]; -- cgit v0.10.2 From a4233304bb43f87f97fc2ac9143b513814dcf094 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Sun, 26 Apr 2009 20:41:34 +0000 Subject: mlx4_en: Fix cleanup flow on cq activation In case of mlx4_en_activate_cq() failure, the cleanup code would go to rx_err and try to disable unactivated rings. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index 438678a..7bcc49d 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -583,7 +583,7 @@ int mlx4_en_start_port(struct net_device *dev) err = mlx4_en_activate_cq(priv, cq); if (err) { mlx4_err(mdev, "Failed activating Rx CQ\n"); - goto rx_err; + goto cq_err; } for (j = 0; j < cq->size; j++) cq->buf[j].owner_sr_opcode = MLX4_CQE_OWNER_MASK; -- cgit v0.10.2 From 785a0982eaaeae2fbe3372d1c9c769e8156a7a5a Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Sun, 26 Apr 2009 20:42:57 +0000 Subject: mlx4_en: Handle page allocation failure during receive If we failed to allocate new fragments for receive buffer, the packet should be dropped and packets should be reused. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 0cbb78c..7942c4d 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -610,6 +610,10 @@ static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv, used_frags = mlx4_en_complete_rx_desc(priv, rx_desc, skb_frags, skb_shinfo(skb)->frags, page_alloc, length); + if (unlikely(!used_frags)) { + kfree_skb(skb); + return NULL; + } skb_shinfo(skb)->nr_frags = used_frags; /* Copy headers into the skb linear buffer */ -- cgit v0.10.2 From c759a6b4e1cae6aff71f58c9c85404ebcd81b6e0 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 27 Apr 2009 02:36:20 -0700 Subject: net: Fix LL_MAX_HEADER for CONFIG_TR_MODULE Unless I miss anything this should fix a bug. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2e7783f..453be9a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -104,7 +104,7 @@ struct wireless_dev; # else # define LL_MAX_HEADER 96 # endif -#elif defined(CONFIG_TR) +#elif defined(CONFIG_TR) || defined(CONFIG_TR_MODULE) # define LL_MAX_HEADER 48 #else # define LL_MAX_HEADER 32 -- cgit v0.10.2 From 8f955d7f042e4ac44891a400d5000928f8db9f58 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Sat, 25 Apr 2009 09:17:56 +0000 Subject: forcedeth: tx timeout fix This patch fixes the tx_timeout() to properly handle the clean up of the tx ring. It also sets the tx put pointer back to the correct position to be in sync with HW. Signed-off-by: Ayaz Abdulla Signed-off-by: David S. Miller diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 11d5db1..f9a846b 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -1880,6 +1880,7 @@ static void nv_init_tx(struct net_device *dev) np->tx_pkts_in_progress = 0; np->tx_change_owner = NULL; np->tx_end_flip = NULL; + np->tx_stop = 0; for (i = 0; i < np->tx_ring_size; i++) { if (!nv_optimized(np)) { @@ -2530,6 +2531,8 @@ static void nv_tx_timeout(struct net_device *dev) struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); u32 status; + union ring_type put_tx; + int saved_tx_limit; if (np->msi_flags & NV_MSI_X_ENABLED) status = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK; @@ -2589,24 +2592,32 @@ static void nv_tx_timeout(struct net_device *dev) /* 1) stop tx engine */ nv_stop_tx(dev); - /* 2) check that the packets were not sent already: */ + /* 2) complete any outstanding tx and do not give HW any limited tx pkts */ + saved_tx_limit = np->tx_limit; + np->tx_limit = 0; /* prevent giving HW any limited pkts */ + np->tx_stop = 0; /* prevent waking tx queue */ if (!nv_optimized(np)) nv_tx_done(dev, np->tx_ring_size); else nv_tx_done_optimized(dev, np->tx_ring_size); - /* 3) if there are dead entries: clear everything */ - if (np->get_tx_ctx != np->put_tx_ctx) { - printk(KERN_DEBUG "%s: tx_timeout: dead entries!\n", dev->name); - nv_drain_tx(dev); - nv_init_tx(dev); - setup_hw_rings(dev, NV_SETUP_TX_RING); - } + /* save current HW postion */ + if (np->tx_change_owner) + put_tx.ex = np->tx_change_owner->first_tx_desc; + else + put_tx = np->put_tx; - netif_wake_queue(dev); + /* 3) clear all tx state */ + nv_drain_tx(dev); + nv_init_tx(dev); + + /* 4) restore state to current HW position */ + np->get_tx = np->put_tx = put_tx; + np->tx_limit = saved_tx_limit; - /* 4) restart tx engine */ + /* 5) restart tx engine */ nv_start_tx(dev); + netif_wake_queue(dev); spin_unlock_irq(&np->lock); } -- cgit v0.10.2 From 6a783c9067e3f71aac61a9262fe42c1f68efd4fc Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 27 Apr 2009 02:58:59 -0700 Subject: xfrm: wrong hash value for temporary SA When kernel inserts a temporary SA for IKE, it uses the wrong hash value for dst list. Two hash values were calcultated before: one with source address and one with a wildcard source address. Bug hinted by Junwei Zhang Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 8227172..5f1f865 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -794,7 +794,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr, { static xfrm_address_t saddr_wildcard = { }; struct net *net = xp_net(pol); - unsigned int h; + unsigned int h, h_wildcard; struct hlist_node *entry; struct xfrm_state *x, *x0, *to_put; int acquire_in_progress = 0; @@ -819,8 +819,8 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr, if (best) goto found; - h = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family); - hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h, bydst) { + h_wildcard = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family); + hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h_wildcard, bydst) { if (x->props.family == family && x->props.reqid == tmpl->reqid && !(x->props.flags & XFRM_STATE_WILDRECV) && -- cgit v0.10.2 From ae0e8e82205c903978a79ebf5e31c670b61fa5b4 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 27 Apr 2009 03:04:58 -0700 Subject: veth: prevent oops caused by netdev destructor From: Stephen Hemminger The veth driver will oops if sysfs hooks are open while module is removed. The net device destructor can not point to code in a module; basically there are only two possible safe values: NULL - no destructor, or free_netdev - free on last use Signed-off-by: David S. Miller diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 015db1c..8e56fcf 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -210,14 +210,11 @@ rx_drop: static struct net_device_stats *veth_get_stats(struct net_device *dev) { - struct veth_priv *priv; - struct net_device_stats *dev_stats; - int cpu; + struct veth_priv *priv = netdev_priv(dev); + struct net_device_stats *dev_stats = &dev->stats; + unsigned int cpu; struct veth_net_stats *stats; - priv = netdev_priv(dev); - dev_stats = &dev->stats; - dev_stats->rx_packets = 0; dev_stats->tx_packets = 0; dev_stats->rx_bytes = 0; @@ -225,16 +222,17 @@ static struct net_device_stats *veth_get_stats(struct net_device *dev) dev_stats->tx_dropped = 0; dev_stats->rx_dropped = 0; - for_each_online_cpu(cpu) { - stats = per_cpu_ptr(priv->stats, cpu); + if (priv->stats) + for_each_online_cpu(cpu) { + stats = per_cpu_ptr(priv->stats, cpu); - dev_stats->rx_packets += stats->rx_packets; - dev_stats->tx_packets += stats->tx_packets; - dev_stats->rx_bytes += stats->rx_bytes; - dev_stats->tx_bytes += stats->tx_bytes; - dev_stats->tx_dropped += stats->tx_dropped; - dev_stats->rx_dropped += stats->rx_dropped; - } + dev_stats->rx_packets += stats->rx_packets; + dev_stats->tx_packets += stats->tx_packets; + dev_stats->rx_bytes += stats->rx_bytes; + dev_stats->tx_bytes += stats->tx_bytes; + dev_stats->tx_dropped += stats->tx_dropped; + dev_stats->rx_dropped += stats->rx_dropped; + } return dev_stats; } @@ -261,6 +259,8 @@ static int veth_close(struct net_device *dev) netif_carrier_off(dev); netif_carrier_off(priv->peer); + free_percpu(priv->stats); + priv->stats = NULL; return 0; } @@ -291,15 +291,6 @@ static int veth_dev_init(struct net_device *dev) return 0; } -static void veth_dev_free(struct net_device *dev) -{ - struct veth_priv *priv; - - priv = netdev_priv(dev); - free_percpu(priv->stats); - free_netdev(dev); -} - static const struct net_device_ops veth_netdev_ops = { .ndo_init = veth_dev_init, .ndo_open = veth_open, @@ -317,7 +308,7 @@ static void veth_setup(struct net_device *dev) dev->netdev_ops = &veth_netdev_ops; dev->ethtool_ops = &veth_ethtool_ops; dev->features |= NETIF_F_LLTX; - dev->destructor = veth_dev_free; + dev->destructor = free_netdev; } /* -- cgit v0.10.2 From 495dce123ceabbae035552437fcaa0f69247ff08 Mon Sep 17 00:00:00 2001 From: "Waskiewicz Jr, Peter P" Date: Thu, 23 Apr 2009 11:15:18 +0000 Subject: ixgbe: Fix WoL functionality for 82599 KX4 devices The current code writes the PME enabled bit in PCI config space which is wrong. This was needed for pre-release hardware, and was not removed from the driver. Also, we need to clear the WUS (wake up status) after we resume. Otherwise we can't wake for the same event again since it's still asserted in the hardware. Plus, the multicast lists were being written improperly, causing multicast WoL to fail. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 5567519..186a650 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -50,7 +50,6 @@ static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw); static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index); static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index); static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); -static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr); static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq); /** @@ -1377,8 +1376,7 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list, * Clear accounting of old secondary address list, * don't count RAR[0] */ - uc_addr_in_use = hw->addr_ctrl.rar_used_count - - hw->addr_ctrl.mc_addr_in_rar_count - 1; + uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1; hw->addr_ctrl.rar_used_count -= uc_addr_in_use; hw->addr_ctrl.overflow_promisc = 0; @@ -1493,40 +1491,6 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) } /** - * ixgbe_add_mc_addr - Adds a multicast address. - * @hw: pointer to hardware structure - * @mc_addr: new multicast address - * - * Adds it to unused receive address register or to the multicast table. - **/ -static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) -{ - u32 rar_entries = hw->mac.num_rar_entries; - u32 rar; - - hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n", - mc_addr[0], mc_addr[1], mc_addr[2], - mc_addr[3], mc_addr[4], mc_addr[5]); - - /* - * Place this multicast address in the RAR if there is room, - * else put it in the MTA - */ - if (hw->addr_ctrl.rar_used_count < rar_entries) { - /* use RAR from the end up for multicast */ - rar = rar_entries - hw->addr_ctrl.mc_addr_in_rar_count - 1; - hw->mac.ops.set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV); - hw_dbg(hw, "Added a multicast address to RAR[%d]\n", rar); - hw->addr_ctrl.rar_used_count++; - hw->addr_ctrl.mc_addr_in_rar_count++; - } else { - ixgbe_set_mta(hw, mc_addr); - } - - hw_dbg(hw, "ixgbe_add_mc_addr Complete\n"); -} - -/** * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses * @hw: pointer to hardware structure * @mc_addr_list: the list of new multicast addresses @@ -1542,7 +1506,6 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, u32 mc_addr_count, ixgbe_mc_addr_itr next) { u32 i; - u32 rar_entries = hw->mac.num_rar_entries; u32 vmdq; /* @@ -1550,18 +1513,8 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, * use. */ hw->addr_ctrl.num_mc_addrs = mc_addr_count; - hw->addr_ctrl.rar_used_count -= hw->addr_ctrl.mc_addr_in_rar_count; - hw->addr_ctrl.mc_addr_in_rar_count = 0; hw->addr_ctrl.mta_in_use = 0; - /* Zero out the other receive addresses. */ - hw_dbg(hw, "Clearing RAR[%d-%d]\n", hw->addr_ctrl.rar_used_count, - rar_entries - 1); - for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); - } - /* Clear the MTA */ hw_dbg(hw, " Clearing MTA\n"); for (i = 0; i < hw->mac.mcft_size; i++) @@ -1570,7 +1523,7 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, /* Add the new addresses */ for (i = 0; i < mc_addr_count; i++) { hw_dbg(hw, " Adding the multicast addresses:\n"); - ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq)); + ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq)); } /* Enable mta */ diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 0188425..07e778d 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3646,6 +3646,8 @@ static int ixgbe_resume(struct pci_dev *pdev) ixgbe_reset(adapter); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); + if (netif_running(netdev)) { err = ixgbe_open(adapter->netdev); if (err) @@ -4575,7 +4577,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; static int cards_found; int i, err, pci_using_dac; - u16 pm_value = 0; u32 part_num, eec; err = pci_enable_device(pdev); @@ -4763,11 +4764,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, switch (pdev->device) { case IXGBE_DEV_ID_82599_KX4: -#define IXGBE_PCIE_PMCSR 0x44 - adapter->wol = IXGBE_WUFC_MAG; - pci_read_config_word(pdev, IXGBE_PCIE_PMCSR, &pm_value); - pci_write_config_word(pdev, IXGBE_PCIE_PMCSR, - (pm_value | (1 << 8))); + adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX | + IXGBE_WUFC_MC | IXGBE_WUFC_BC); break; default: adapter->wol = 0; -- cgit v0.10.2 From cad81bc2529ab8c62b6fdc83a1c0c7f4a87209eb Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 27 Apr 2009 01:41:34 +0200 Subject: ptrace: ptrace_attach: fix the usage of ->cred_exec_mutex ptrace_attach() needs task->cred_exec_mutex, not current->cred_exec_mutex. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath Acked-by: David Howells Signed-off-by: James Morris diff --git a/kernel/ptrace.c b/kernel/ptrace.c index dfcd83c..0692ab5 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -188,7 +188,7 @@ int ptrace_attach(struct task_struct *task) /* Protect exec's credential calculations against our interference; * SUID, SGID and LSM creds get determined differently under ptrace. */ - retval = mutex_lock_interruptible(¤t->cred_exec_mutex); + retval = mutex_lock_interruptible(&task->cred_exec_mutex); if (retval < 0) goto out; @@ -232,7 +232,7 @@ repeat: bad: write_unlock_irqrestore(&tasklist_lock, flags); task_unlock(task); - mutex_unlock(¤t->cred_exec_mutex); + mutex_unlock(&task->cred_exec_mutex); out: return retval; } -- cgit v0.10.2 From a9b487fa1e00b42f9667abfeca4a5295a71333db Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 27 Apr 2009 12:18:05 +0200 Subject: ALSA: snd-usb-caiaq: fix reported elapsed periods Reset the internal period position counter upon stream startup. This fixes initial aplay underruns and problems related to latency picky applications such as pulseaudio. Bumped the version number to 1.3.14. Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index 3f45c0f..b13ce76 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -195,11 +195,14 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream) debug("%s(%p)\n", __func__, substream); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + dev->period_out_count[index] = BYTES_PER_SAMPLE + 1; dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1; - else + } else { + dev->period_in_count[index] = BYTES_PER_SAMPLE; dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE; - + } + if (dev->streaming) return 0; @@ -300,8 +303,7 @@ static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev, if (!sub) continue; - pb = frames_to_bytes(sub->runtime, - sub->runtime->period_size); + pb = snd_pcm_lib_period_bytes(sub); cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ? &dev->period_out_count[stream] : &dev->period_in_count[stream]; diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c index 6d51770..515de1c 100644 --- a/sound/usb/caiaq/device.c +++ b/sound/usb/caiaq/device.c @@ -35,7 +35,7 @@ #include "input.h" MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13"); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, RigKontrol3}," -- cgit v0.10.2 From d6397baee468809ef311e763dfc6e9f73418f8a6 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Mon, 27 Apr 2009 07:29:03 -0400 Subject: Btrfs: When shrinking, only update disk size on success Previously, we updated a device's size prior to attempting a shrink operation. This patch moves the device resizing logic to only happen if the shrink completes successfully. In the process, it introduces a new field to btrfs_device -- disk_total_bytes -- to track the on-disk size. Signed-off-by: Chris Ball Signed-off-by: Chris Mason diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index e53835b..5f01dad 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1543,7 +1543,7 @@ static noinline int btrfs_update_device(struct btrfs_trans_handle *trans, btrfs_set_device_io_align(leaf, dev_item, device->io_align); btrfs_set_device_io_width(leaf, dev_item, device->io_width); btrfs_set_device_sector_size(leaf, dev_item, device->sector_size); - btrfs_set_device_total_bytes(leaf, dev_item, device->total_bytes); + btrfs_set_device_total_bytes(leaf, dev_item, device->disk_total_bytes); btrfs_set_device_bytes_used(leaf, dev_item, device->bytes_used); btrfs_mark_buffer_dirty(leaf); @@ -1940,14 +1940,6 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size) device->total_bytes = new_size; if (device->writeable) device->fs_devices->total_rw_bytes -= diff; - ret = btrfs_update_device(trans, device); - if (ret) { - unlock_chunks(root); - btrfs_end_transaction(trans, root); - goto done; - } - WARN_ON(diff > old_total); - btrfs_set_super_total_bytes(super_copy, old_total - diff); unlock_chunks(root); btrfs_end_transaction(trans, root); @@ -1979,7 +1971,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size) length = btrfs_dev_extent_length(l, dev_extent); if (key.offset + length <= new_size) - goto done; + break; chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent); chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent); @@ -1992,6 +1984,26 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size) goto done; } + /* Shrinking succeeded, else we would be at "done". */ + trans = btrfs_start_transaction(root, 1); + if (!trans) { + ret = -ENOMEM; + goto done; + } + lock_chunks(root); + + device->disk_total_bytes = new_size; + /* Now btrfs_update_device() will change the on-disk size. */ + ret = btrfs_update_device(trans, device); + if (ret) { + unlock_chunks(root); + btrfs_end_transaction(trans, root); + goto done; + } + WARN_ON(diff > old_total); + btrfs_set_super_total_bytes(super_copy, old_total - diff); + unlock_chunks(root); + btrfs_end_transaction(trans, root); done: btrfs_free_path(path); return ret; @@ -3076,7 +3088,8 @@ static int fill_device_from_item(struct extent_buffer *leaf, unsigned long ptr; device->devid = btrfs_device_id(leaf, dev_item); - device->total_bytes = btrfs_device_total_bytes(leaf, dev_item); + device->disk_total_bytes = btrfs_device_total_bytes(leaf, dev_item); + device->total_bytes = device->disk_total_bytes; device->bytes_used = btrfs_device_bytes_used(leaf, dev_item); device->type = btrfs_device_type(leaf, dev_item); device->io_align = btrfs_device_io_align(leaf, dev_item); diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index 5836327..5c3ff6d 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -61,6 +61,9 @@ struct btrfs_device { /* size of the device */ u64 total_bytes; + /* size of the disk */ + u64 disk_total_bytes; + /* bytes used */ u64 bytes_used; -- cgit v0.10.2 From b7967db75a38df4891b22efe1b0969b9357eb946 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 27 Apr 2009 07:29:04 -0400 Subject: Btrfs: remove #if 0 code Btrfs had some old code sitting around under #if 0, this drops it. Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 44c94d8..77f9a3b 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -584,18 +584,7 @@ int btrfs_wq_submit_bio(struct btrfs_fs_info *fs_info, struct inode *inode, btrfs_set_work_high_prio(&async->work); btrfs_queue_worker(&fs_info->workers, &async->work); -#if 0 - int limit = btrfs_async_submit_limit(fs_info); - if (atomic_read(&fs_info->nr_async_submits) > limit) { - wait_event_timeout(fs_info->async_submit_wait, - (atomic_read(&fs_info->nr_async_submits) < limit), - HZ/10); - wait_event_timeout(fs_info->async_submit_wait, - (atomic_read(&fs_info->nr_async_bios) < limit), - HZ/10); - } -#endif while (atomic_read(&fs_info->async_submit_draining) && atomic_read(&fs_info->nr_async_submits)) { wait_event(fs_info->async_submit_wait, @@ -770,27 +759,6 @@ static void btree_invalidatepage(struct page *page, unsigned long offset) } } -#if 0 -static int btree_writepage(struct page *page, struct writeback_control *wbc) -{ - struct buffer_head *bh; - struct btrfs_root *root = BTRFS_I(page->mapping->host)->root; - struct buffer_head *head; - if (!page_has_buffers(page)) { - create_empty_buffers(page, root->fs_info->sb->s_blocksize, - (1 << BH_Dirty)|(1 << BH_Uptodate)); - } - head = page_buffers(page); - bh = head; - do { - if (buffer_dirty(bh)) - csum_tree_block(root, bh, 0); - bh = bh->b_this_page; - } while (bh != head); - return block_write_full_page(page, btree_get_block, wbc); -} -#endif - static struct address_space_operations btree_aops = { .readpage = btree_readpage, .writepage = btree_writepage, @@ -1278,11 +1246,7 @@ static int btrfs_congested_fn(void *congested_data, int bdi_bits) int ret = 0; struct btrfs_device *device; struct backing_dev_info *bdi; -#if 0 - if ((bdi_bits & (1 << BDI_write_congested)) && - btrfs_congested_async(info, 0)) - return 1; -#endif + list_for_each_entry(device, &info->fs_devices->devices, dev_list) { if (!device->bdev) continue; @@ -2334,16 +2298,6 @@ int close_ctree(struct btrfs_root *root) btrfs_stop_workers(&fs_info->endio_write_workers); btrfs_stop_workers(&fs_info->submit_workers); -#if 0 - while (!list_empty(&fs_info->hashers)) { - struct btrfs_hasher *hasher; - hasher = list_entry(fs_info->hashers.next, struct btrfs_hasher, - hashers); - list_del(&hasher->hashers); - crypto_free_hash(&fs_info->hash_tfm); - kfree(hasher); - } -#endif btrfs_close_devices(fs_info->fs_devices); btrfs_mapping_tree_free(&fs_info->mapping_tree); diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index c33b540..fe9eb99 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1401,69 +1401,6 @@ out: return total_bytes; } -#if 0 -/* - * helper function to lock both pages and extents in the tree. - * pages must be locked first. - */ -static int lock_range(struct extent_io_tree *tree, u64 start, u64 end) -{ - unsigned long index = start >> PAGE_CACHE_SHIFT; - unsigned long end_index = end >> PAGE_CACHE_SHIFT; - struct page *page; - int err; - - while (index <= end_index) { - page = grab_cache_page(tree->mapping, index); - if (!page) { - err = -ENOMEM; - goto failed; - } - if (IS_ERR(page)) { - err = PTR_ERR(page); - goto failed; - } - index++; - } - lock_extent(tree, start, end, GFP_NOFS); - return 0; - -failed: - /* - * we failed above in getting the page at 'index', so we undo here - * up to but not including the page at 'index' - */ - end_index = index; - index = start >> PAGE_CACHE_SHIFT; - while (index < end_index) { - page = find_get_page(tree->mapping, index); - unlock_page(page); - page_cache_release(page); - index++; - } - return err; -} - -/* - * helper function to unlock both pages and extents in the tree. - */ -static int unlock_range(struct extent_io_tree *tree, u64 start, u64 end) -{ - unsigned long index = start >> PAGE_CACHE_SHIFT; - unsigned long end_index = end >> PAGE_CACHE_SHIFT; - struct page *page; - - while (index <= end_index) { - page = find_get_page(tree->mapping, index); - unlock_page(page); - page_cache_release(page); - index++; - } - unlock_extent(tree, start, end, GFP_NOFS); - return 0; -} -#endif - /* * set the private field for a given byte offset in the tree. If there isn't * an extent_state there already, this does nothing. diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index da3ed96..1d51dc3 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -272,83 +272,6 @@ int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, return 0; } -int btrfs_check_file(struct btrfs_root *root, struct inode *inode) -{ - return 0; -#if 0 - struct btrfs_path *path; - struct btrfs_key found_key; - struct extent_buffer *leaf; - struct btrfs_file_extent_item *extent; - u64 last_offset = 0; - int nritems; - int slot; - int found_type; - int ret; - int err = 0; - u64 extent_end = 0; - - path = btrfs_alloc_path(); - ret = btrfs_lookup_file_extent(NULL, root, path, inode->i_ino, - last_offset, 0); - while (1) { - nritems = btrfs_header_nritems(path->nodes[0]); - if (path->slots[0] >= nritems) { - ret = btrfs_next_leaf(root, path); - if (ret) - goto out; - nritems = btrfs_header_nritems(path->nodes[0]); - } - slot = path->slots[0]; - leaf = path->nodes[0]; - btrfs_item_key_to_cpu(leaf, &found_key, slot); - if (found_key.objectid != inode->i_ino) - break; - if (found_key.type != BTRFS_EXTENT_DATA_KEY) - goto out; - - if (found_key.offset < last_offset) { - WARN_ON(1); - btrfs_print_leaf(root, leaf); - printk(KERN_ERR "inode %lu found offset %llu " - "expected %llu\n", inode->i_ino, - (unsigned long long)found_key.offset, - (unsigned long long)last_offset); - err = 1; - goto out; - } - extent = btrfs_item_ptr(leaf, slot, - struct btrfs_file_extent_item); - found_type = btrfs_file_extent_type(leaf, extent); - if (found_type == BTRFS_FILE_EXTENT_REG) { - extent_end = found_key.offset + - btrfs_file_extent_num_bytes(leaf, extent); - } else if (found_type == BTRFS_FILE_EXTENT_INLINE) { - struct btrfs_item *item; - item = btrfs_item_nr(leaf, slot); - extent_end = found_key.offset + - btrfs_file_extent_inline_len(leaf, extent); - extent_end = (extent_end + root->sectorsize - 1) & - ~((u64)root->sectorsize - 1); - } - last_offset = extent_end; - path->slots[0]++; - } - if (0 && last_offset < inode->i_size) { - WARN_ON(1); - btrfs_print_leaf(root, leaf); - printk(KERN_ERR "inode %lu found offset %llu size %llu\n", - inode->i_ino, (unsigned long long)last_offset, - (unsigned long long)inode->i_size); - err = 1; - - } -out: - btrfs_free_path(path); - return err; -#endif -} - /* * this is very complex, but the basic idea is to drop all extents * in the range start - end. hint_block is filled in with a block number @@ -689,7 +612,6 @@ out: unlock_extent(&BTRFS_I(inode)->io_tree, orig_locked_end, locked_end - 1, GFP_NOFS); } - btrfs_check_file(root, inode); return ret; } -- cgit v0.10.2 From 193f284d4985db0370a8a1bbdfb20df548cf9ffb Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 27 Apr 2009 07:29:05 -0400 Subject: Btrfs: ratelimit IO error printks Btrfs has printks for various IO errors, including bad checksums and mismatches between what we expect the block headers to contain and what we actually find on the disk. Longer term we need a real reporting mechanism for this, but for now printk is going to have to do. Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 77f9a3b..aa0c259 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -232,10 +232,14 @@ static int csum_tree_block(struct btrfs_root *root, struct extent_buffer *buf, memcpy(&found, result, csum_size); read_extent_buffer(buf, &val, 0, csum_size); - printk(KERN_INFO "btrfs: %s checksum verify failed " - "on %llu wanted %X found %X level %d\n", - root->fs_info->sb->s_id, - buf->start, val, found, btrfs_header_level(buf)); + if (printk_ratelimit()) { + printk(KERN_INFO "btrfs: %s checksum verify " + "failed on %llu wanted %X found %X " + "level %d\n", + root->fs_info->sb->s_id, + (unsigned long long)buf->start, val, found, + btrfs_header_level(buf)); + } if (result != (char *)&inline_result) kfree(result); return 1; @@ -268,10 +272,13 @@ static int verify_parent_transid(struct extent_io_tree *io_tree, ret = 0; goto out; } - printk("parent transid verify failed on %llu wanted %llu found %llu\n", - (unsigned long long)eb->start, - (unsigned long long)parent_transid, - (unsigned long long)btrfs_header_generation(eb)); + if (printk_ratelimit()) { + printk("parent transid verify failed on %llu wanted %llu " + "found %llu\n", + (unsigned long long)eb->start, + (unsigned long long)parent_transid, + (unsigned long long)btrfs_header_generation(eb)); + } ret = 1; clear_extent_buffer_uptodate(io_tree, eb); out: @@ -415,9 +422,12 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, found_start = btrfs_header_bytenr(eb); if (found_start != start) { - printk(KERN_INFO "btrfs bad tree block start %llu %llu\n", - (unsigned long long)found_start, - (unsigned long long)eb->start); + if (printk_ratelimit()) { + printk(KERN_INFO "btrfs bad tree block start " + "%llu %llu\n", + (unsigned long long)found_start, + (unsigned long long)eb->start); + } ret = -EIO; goto err; } @@ -429,8 +439,10 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, goto err; } if (check_tree_block_fsid(root, eb)) { - printk(KERN_INFO "btrfs bad fsid on block %llu\n", - (unsigned long long)eb->start); + if (printk_ratelimit()) { + printk(KERN_INFO "btrfs bad fsid on block %llu\n", + (unsigned long long)eb->start); + } ret = -EIO; goto err; } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 2fdb299..552e08a 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1823,10 +1823,12 @@ good: return 0; zeroit: - printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u " - "private %llu\n", page->mapping->host->i_ino, - (unsigned long long)start, csum, - (unsigned long long)private); + if (printk_ratelimit()) { + printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u " + "private %llu\n", page->mapping->host->i_ino, + (unsigned long long)start, csum, + (unsigned long long)private); + } memset(kaddr + offset, 1, end - start + 1); flush_dcache_page(page); kunmap_atomic(kaddr, KM_USER0); -- cgit v0.10.2 From 395a434e39cb6dc6e1ff53bb43722b534a3c68d6 Mon Sep 17 00:00:00 2001 From: Subrata Modak Date: Mon, 27 Apr 2009 16:42:37 +0530 Subject: ALSA: Fix Trivial Warnining in sound/pci/cmipci.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed the compile warning below by initializatin iomidi variable properly. sound/pci/cmipci.c: In function ‘snd_cmipci_probe’: sound/pci/cmipci.c:3017: warning: ‘iomidi’ may be used uninitialized in this function Signed-off-by: Subrata Modak Cc: linux-pci Cc: Balbir Singh Cc: Sachin P Sant Signed-off-by: Takashi Iwai diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index c7899c3..449fe02 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -3014,7 +3014,7 @@ static int __devinit snd_cmipci_create(struct snd_card *card, struct pci_dev *pc .dev_free = snd_cmipci_dev_free, }; unsigned int val; - long iomidi; + long iomidi = 0; int integrated_midi = 0; char modelstr[16]; int pcm_index, pcm_spdif_index; -- cgit v0.10.2 From 7ced70c47f68ad672f50781de5adc6d41e6d2866 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Thu, 23 Apr 2009 02:24:21 +0000 Subject: update Documentation/isdn/00-INDEX After the merging of mISDN, state which files refer only to the old isdn4linux subsystem. Also add a few missing files. Signed-off-by: Tilman Schmidt Signed-off-by: Karsten Keil Signed-off-by: David S. Miller diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX index 9fee5f2..d9660ee 100644 --- a/Documentation/isdn/00-INDEX +++ b/Documentation/isdn/00-INDEX @@ -2,8 +2,12 @@ - this file (info on ISDN implementation for Linux) CREDITS - list of the kind folks that brought you this stuff. +HiSax.cert + - information about the ITU approval certification of the HiSax driver. INTERFACE - - description of Linklevel and Hardwarelevel ISDN interface. + - description of isdn4linux Link Level and Hardware Level interfaces. +INTERFACE.fax + - description of the fax subinterface of isdn4linux. README - general info on what you need and what to do for Linux ISDN. README.FAQ @@ -12,6 +16,8 @@ README.audio - info for running audio over ISDN. README.fax - info for using Fax over ISDN. +README.gigaset + - info on the drivers for Siemens Gigaset ISDN adapters. README.icn - info on the ICN-ISDN-card and its driver. README.HiSax @@ -37,7 +43,8 @@ README.diversion README.sc - info on driver for Spellcaster cards. README.x25 - _ info for running X.25 over ISDN. + - info for running X.25 over ISDN. README.hysdn - - info on driver for Hypercope active HYSDN cards - + - info on driver for Hypercope active HYSDN cards +README.mISDN + - info on the Modular ISDN subsystem (mISDN). -- cgit v0.10.2 From 554f200e22a13e19bd407d0037e41be0ec8a0a2e Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Thu, 23 Apr 2009 02:24:21 +0000 Subject: Documentation/isdn/INTERFACE.CAPI isdn: document Kernel CAPI driver interface Create a file Documentation/isdn/INTERFACE.CAPI describing the interface between the kernel CAPI subsystem and ISDN device drivers, analogous to the existing Documentation/isdn/INTERFACE for the old isdn4linux subsystem. Also add kerneldoc comments to the exported functions in drivers/isdn/capi/kcapi.c. Impact: Documentation Signed-off-by: Tilman Schmidt Signed-off-by: Karsten Keil Signed-off-by: David S. Miller diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX index d9660ee..5a2d699 100644 --- a/Documentation/isdn/00-INDEX +++ b/Documentation/isdn/00-INDEX @@ -8,6 +8,8 @@ INTERFACE - description of isdn4linux Link Level and Hardware Level interfaces. INTERFACE.fax - description of the fax subinterface of isdn4linux. +INTERFACE.CAPI + - description of kernel CAPI Link Level to Hardware Level interface. README - general info on what you need and what to do for Linux ISDN. README.FAQ diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI new file mode 100644 index 0000000..8947ffc --- /dev/null +++ b/Documentation/isdn/INTERFACE.CAPI @@ -0,0 +1,207 @@ +Kernel CAPI Interface to Hardware Drivers +----------------------------------------- + +1. Overview + +Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI +hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI +lingo) with Kernel CAPI to indicate their readiness to provide their service +to CAPI applications. CAPI applications also register with Kernel CAPI, +requesting association with a CAPI device. Kernel CAPI then dispatches the +application registration to an available device, forwarding it to the +corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both +directions between the application and the hardware driver. + + +2. Driver and Device Registration + +CAPI drivers optionally register themselves with Kernel CAPI by calling the +Kernel CAPI function register_capi_driver() with a pointer to a struct +capi_driver. This structure must be filled with the name and revision of the +driver, and optionally a pointer to a callback function, add_card(). The +registration can be revoked by calling the function unregister_capi_driver() +with a pointer to the same struct capi_driver. + +CAPI drivers must register each of the ISDN devices they control with Kernel +CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a +struct capi_ctr before they can be used. This structure must be filled with +the names of the driver and controller, and a number of callback function +pointers which are subsequently used by Kernel CAPI for communicating with the +driver. The registration can be revoked by calling the function +detach_capi_ctr() with a pointer to the same struct capi_ctr. + +Before the device can be actually used, the driver must fill in the device +information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr +structure of the device, and signal its readiness by calling capi_ctr_ready(). +From then on, Kernel CAPI may call the registered callback functions for the +device. + +If the device becomes unusable for any reason (shutdown, disconnect ...), the +driver has to call capi_ctr_reseted(). This will prevent further calls to the +callback functions by Kernel CAPI. + + +3. Application Registration and Communication + +Kernel CAPI forwards registration requests from applications (calls to CAPI +operation CAPI_REGISTER) to an appropriate hardware driver by calling its +register_appl() callback function. A unique Application ID (ApplID, u16) is +allocated by Kernel CAPI and passed to register_appl() along with the +parameter structure provided by the application. This is analogous to the +open() operation on regular files or character devices. + +After a successful return from register_appl(), CAPI messages from the +application may be passed to the driver for the device via calls to the +send_message() callback function. The CAPI message to send is stored in the +data portion of a skb. Conversely, the driver may call Kernel CAPI's +capi_ctr_handle_message() function to pass a received CAPI message to Kernel +CAPI for forwarding to an application, specifying its ApplID. + +Format and semantics of CAPI messages are specified in the CAPI 2.0 standard. + +Deregistration requests (CAPI operation CAPI_RELEASE) from applications are +forwarded as calls to the release_appl() callback function, passing the same +ApplID as with register_appl(). After return from release_appl(), no CAPI +messages for that application may be passed to or from the device anymore. + + +4. Data Structures + +4.1 struct capi_driver + +This structure describes a Kernel CAPI driver itself. It is used in the +register_capi_driver() and unregister_capi_driver() functions, and contains +the following non-private fields, all to be set by the driver before calling +register_capi_driver(): + +char name[32] + the name of the driver, as a zero terminated ASCII string +char revision[32] + the revision number of the driver, as a zero terminated ASCII string +int (*add_card)(struct capi_driver *driver, capicardparams *data) + a callback function pointer (may be NULL) + + +4.2 struct capi_ctr + +This structure describes an ISDN device (controller) handled by a Kernel CAPI +driver. After registration via the attach_capi_ctr() function it is passed to +all controller specific lower layer interface and callback functions to +identify the controller to operate on. + +It contains the following non-private fields: + +- to be set by the driver before calling attach_capi_ctr(): + +struct module *owner + pointer to the driver module owning the device + +void *driverdata + an opaque pointer to driver specific data, not touched by Kernel CAPI + +char name[32] + the name of the controller, as a zero terminated ASCII string + +char *driver_name + the name of the driver, as a zero terminated ASCII string + +int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata) + (optional) pointer to a callback function for sending firmware and + configuration data to the device + +void (*reset_ctr)(struct capi_ctr *ctrlr) + pointer to a callback function for performing a reset on the device, + releasing all registered applications + +void (*register_appl)(struct capi_ctr *ctrlr, u16 applid, + capi_register_params *rparam) +void (*release_appl)(struct capi_ctr *ctrlr, u16 applid) + pointers to callback functions for registration and deregistration of + applications with the device + +u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb) + pointer to a callback function for sending a CAPI message to the + device + +char *(*procinfo)(struct capi_ctr *ctrlr) + pointer to a callback function returning the entry for the device in + the CAPI controller info table, /proc/capi/controller + +read_proc_t *ctr_read_proc + pointer to the read_proc callback function for the device's proc file + system entry, /proc/capi/controllers/; will be called with a + pointer to the device's capi_ctr structure as the last (data) argument + +- to be filled in before calling capi_ctr_ready(): + +u8 manu[CAPI_MANUFACTURER_LEN] + value to return for CAPI_GET_MANUFACTURER + +capi_version version + value to return for CAPI_GET_VERSION + +capi_profile profile + value to return for CAPI_GET_PROFILE + +u8 serial[CAPI_SERIAL_LEN] + value to return for CAPI_GET_SERIAL + + +5. Lower Layer Interface Functions + +(declared in ) + +void register_capi_driver(struct capi_driver *drvr) +void unregister_capi_driver(struct capi_driver *drvr) + register/unregister a driver with Kernel CAPI + +int attach_capi_ctr(struct capi_ctr *ctrlr) +int detach_capi_ctr(struct capi_ctr *ctrlr) + register/unregister a device (controller) with Kernel CAPI + +void capi_ctr_ready(struct capi_ctr *ctrlr) +void capi_ctr_reseted(struct capi_ctr *ctrlr) + signal controller ready/not ready + +void capi_ctr_suspend_output(struct capi_ctr *ctrlr) +void capi_ctr_resume_output(struct capi_ctr *ctrlr) + signal suspend/resume + +void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid, + struct sk_buff *skb) + pass a received CAPI message to Kernel CAPI + for forwarding to the specified application + + +6. Helper Functions and Macros + +Library functions (from ): + +void capilib_new_ncci(struct list_head *head, u16 applid, + u32 ncci, u32 winsize) +void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci) +void capilib_release_appl(struct list_head *head, u16 applid) +void capilib_release(struct list_head *head) +void capilib_data_b3_conf(struct list_head *head, u16 applid, + u32 ncci, u16 msgid) +u16 capilib_data_b3_req(struct list_head *head, u16 applid, + u32 ncci, u16 msgid) + + +Macros to extract/set element values from/in a CAPI message header +(from ): + +Get Macro Set Macro Element (Type) + +CAPIMSG_LEN(m) CAPIMSG_SETLEN(m, len) Total Length (u16) +CAPIMSG_APPID(m) CAPIMSG_SETAPPID(m, applid) ApplID (u16) +CAPIMSG_COMMAND(m) CAPIMSG_SETCOMMAND(m,cmd) Command (u8) +CAPIMSG_SUBCOMMAND(m) CAPIMSG_SETSUBCOMMAND(m, cmd) Subcommand (u8) +CAPIMSG_CMD(m) - Command*256 + + Subcommand (u16) +CAPIMSG_MSGID(m) CAPIMSG_SETMSGID(m, msgid) Message Number (u16) + +CAPIMSG_CONTROL(m) CAPIMSG_SETCONTROL(m, contr) Controller/PLCI/NCCI + (u32) +CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16) + diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c index 5360c4f..f331703 100644 --- a/drivers/isdn/capi/kcapi.c +++ b/drivers/isdn/capi/kcapi.c @@ -270,6 +270,15 @@ static void recv_handler(struct work_struct *work) mutex_unlock(&ap->recv_mtx); } +/** + * capi_ctr_handle_message() - handle incoming CAPI message + * @card: controller descriptor structure. + * @appl: application ID. + * @skb: message. + * + * Called by hardware driver to pass a CAPI message to the application. + */ + void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb) { struct capi20_appl *ap; @@ -348,6 +357,13 @@ error: EXPORT_SYMBOL(capi_ctr_handle_message); +/** + * capi_ctr_ready() - signal CAPI controller ready + * @card: controller descriptor structure. + * + * Called by hardware driver to signal that the controller is up and running. + */ + void capi_ctr_ready(struct capi_ctr * card) { card->cardstate = CARD_RUNNING; @@ -360,6 +376,14 @@ void capi_ctr_ready(struct capi_ctr * card) EXPORT_SYMBOL(capi_ctr_ready); +/** + * capi_ctr_reseted() - signal CAPI controller reset + * @card: controller descriptor structure. + * + * Called by hardware driver to signal that the controller is down and + * unavailable for use. + */ + void capi_ctr_reseted(struct capi_ctr * card) { u16 appl; @@ -391,6 +415,13 @@ void capi_ctr_reseted(struct capi_ctr * card) EXPORT_SYMBOL(capi_ctr_reseted); +/** + * capi_ctr_suspend_output() - suspend controller + * @card: controller descriptor structure. + * + * Called by hardware driver to stop data flow. + */ + void capi_ctr_suspend_output(struct capi_ctr *card) { if (!card->blocked) { @@ -401,6 +432,13 @@ void capi_ctr_suspend_output(struct capi_ctr *card) EXPORT_SYMBOL(capi_ctr_suspend_output); +/** + * capi_ctr_resume_output() - resume controller + * @card: controller descriptor structure. + * + * Called by hardware driver to resume data flow. + */ + void capi_ctr_resume_output(struct capi_ctr *card) { if (card->blocked) { @@ -413,6 +451,14 @@ EXPORT_SYMBOL(capi_ctr_resume_output); /* ------------------------------------------------------------- */ +/** + * attach_capi_ctr() - register CAPI controller + * @card: controller descriptor structure. + * + * Called by hardware driver to register a controller with the CAPI subsystem. + * Return value: 0 on success, error code < 0 on error + */ + int attach_capi_ctr(struct capi_ctr *card) { @@ -459,6 +505,15 @@ attach_capi_ctr(struct capi_ctr *card) EXPORT_SYMBOL(attach_capi_ctr); +/** + * detach_capi_ctr() - unregister CAPI controller + * @card: controller descriptor structure. + * + * Called by hardware driver to remove the registration of a controller + * with the CAPI subsystem. + * Return value: 0 on success, error code < 0 on error + */ + int detach_capi_ctr(struct capi_ctr *card) { if (card->cardstate != CARD_DETECTED) @@ -479,6 +534,13 @@ int detach_capi_ctr(struct capi_ctr *card) EXPORT_SYMBOL(detach_capi_ctr); +/** + * register_capi_driver() - register CAPI driver + * @driver: driver descriptor structure. + * + * Called by hardware driver to register itself with the CAPI subsystem. + */ + void register_capi_driver(struct capi_driver *driver) { unsigned long flags; @@ -490,6 +552,13 @@ void register_capi_driver(struct capi_driver *driver) EXPORT_SYMBOL(register_capi_driver); +/** + * unregister_capi_driver() - unregister CAPI driver + * @driver: driver descriptor structure. + * + * Called by hardware driver to unregister itself from the CAPI subsystem. + */ + void unregister_capi_driver(struct capi_driver *driver) { unsigned long flags; @@ -505,6 +574,13 @@ EXPORT_SYMBOL(unregister_capi_driver); /* -------- CAPI2.0 Interface ---------------------------------- */ /* ------------------------------------------------------------- */ +/** + * capi20_isinstalled() - CAPI 2.0 operation CAPI_INSTALLED + * + * Return value: CAPI result code (CAPI_NOERROR if at least one ISDN controller + * is ready for use, CAPI_REGNOTINSTALLED otherwise) + */ + u16 capi20_isinstalled(void) { int i; @@ -517,6 +593,18 @@ u16 capi20_isinstalled(void) EXPORT_SYMBOL(capi20_isinstalled); +/** + * capi20_register() - CAPI 2.0 operation CAPI_REGISTER + * @ap: CAPI application descriptor structure. + * + * Register an application's presence with CAPI. + * A unique application ID is assigned and stored in @ap->applid. + * After this function returns successfully, the message receive + * callback function @ap->recv_message() may be called at any time + * until capi20_release() has been called for the same @ap. + * Return value: CAPI result code + */ + u16 capi20_register(struct capi20_appl *ap) { int i; @@ -571,6 +659,16 @@ u16 capi20_register(struct capi20_appl *ap) EXPORT_SYMBOL(capi20_register); +/** + * capi20_release() - CAPI 2.0 operation CAPI_RELEASE + * @ap: CAPI application descriptor structure. + * + * Terminate an application's registration with CAPI. + * After this function returns successfully, the message receive + * callback function @ap->recv_message() will no longer be called. + * Return value: CAPI result code + */ + u16 capi20_release(struct capi20_appl *ap) { int i; @@ -603,6 +701,15 @@ u16 capi20_release(struct capi20_appl *ap) EXPORT_SYMBOL(capi20_release); +/** + * capi20_put_message() - CAPI 2.0 operation CAPI_PUT_MESSAGE + * @ap: CAPI application descriptor structure. + * @skb: CAPI message. + * + * Transfer a single message to CAPI. + * Return value: CAPI result code + */ + u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb) { struct capi_ctr *card; @@ -668,6 +775,16 @@ u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb) EXPORT_SYMBOL(capi20_put_message); +/** + * capi20_get_manufacturer() - CAPI 2.0 operation CAPI_GET_MANUFACTURER + * @contr: controller number. + * @buf: result buffer (64 bytes). + * + * Retrieve information about the manufacturer of the specified ISDN controller + * or (for @contr == 0) the driver itself. + * Return value: CAPI result code + */ + u16 capi20_get_manufacturer(u32 contr, u8 *buf) { struct capi_ctr *card; @@ -685,6 +802,16 @@ u16 capi20_get_manufacturer(u32 contr, u8 *buf) EXPORT_SYMBOL(capi20_get_manufacturer); +/** + * capi20_get_version() - CAPI 2.0 operation CAPI_GET_VERSION + * @contr: controller number. + * @verp: result structure. + * + * Retrieve version information for the specified ISDN controller + * or (for @contr == 0) the driver itself. + * Return value: CAPI result code + */ + u16 capi20_get_version(u32 contr, struct capi_version *verp) { struct capi_ctr *card; @@ -703,6 +830,16 @@ u16 capi20_get_version(u32 contr, struct capi_version *verp) EXPORT_SYMBOL(capi20_get_version); +/** + * capi20_get_serial() - CAPI 2.0 operation CAPI_GET_SERIAL_NUMBER + * @contr: controller number. + * @serial: result buffer (8 bytes). + * + * Retrieve the serial number of the specified ISDN controller + * or (for @contr == 0) the driver itself. + * Return value: CAPI result code + */ + u16 capi20_get_serial(u32 contr, u8 *serial) { struct capi_ctr *card; @@ -721,6 +858,16 @@ u16 capi20_get_serial(u32 contr, u8 *serial) EXPORT_SYMBOL(capi20_get_serial); +/** + * capi20_get_profile() - CAPI 2.0 operation CAPI_GET_PROFILE + * @contr: controller number. + * @profp: result structure. + * + * Retrieve capability information for the specified ISDN controller + * or (for @contr == 0) the number of installed controllers. + * Return value: CAPI result code + */ + u16 capi20_get_profile(u32 contr, struct capi_profile *profp) { struct capi_ctr *card; @@ -903,6 +1050,15 @@ static int old_capi_manufacturer(unsigned int cmd, void __user *data) } #endif +/** + * capi20_manufacturer() - CAPI 2.0 operation CAPI_MANUFACTURER + * @cmd: command. + * @data: parameter. + * + * Perform manufacturer specific command. + * Return value: CAPI result code + */ + int capi20_manufacturer(unsigned int cmd, void __user *data) { struct capi_ctr *card; @@ -981,6 +1137,21 @@ int capi20_manufacturer(unsigned int cmd, void __user *data) EXPORT_SYMBOL(capi20_manufacturer); /* temporary hack */ + +/** + * capi20_set_callback() - set CAPI application notification callback function + * @ap: CAPI application descriptor structure. + * @callback: callback function (NULL to remove). + * + * If not NULL, the callback function will be called to notify the + * application of the addition or removal of a controller. + * The first argument (cmd) will tell whether the controller was added + * (KCI_CONTRUP) or removed (KCI_CONTRDOWN). + * The second argument (contr) will be the controller number. + * For cmd==KCI_CONTRUP the third argument (data) will be a pointer to the + * new controller's capability profile structure. + */ + void capi20_set_callback(struct capi20_appl *ap, void (*callback) (unsigned int cmd, __u32 contr, void *data)) { -- cgit v0.10.2 From 2296e5a0136f7ba64c99f3a48a55a687aa9abcc8 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Thu, 23 Apr 2009 02:24:21 +0000 Subject: Add reference to CAPI 2.0 standard Move the entry about CAPI 2.0 to the beginning and add a URL. Incorporate changes suggested by Randy Dunlap, thanks for proofreading. Signed-off-by: Karsten Keil Signed-off-by: David S. Miller diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI index 8947ffc..786d619 100644 --- a/Documentation/isdn/INTERFACE.CAPI +++ b/Documentation/isdn/INTERFACE.CAPI @@ -3,6 +3,11 @@ Kernel CAPI Interface to Hardware Drivers 1. Overview +From the CAPI 2.0 specification: +COMMON-ISDN-API (CAPI) is an application programming interface standard used +to access ISDN equipment connected to basic rate interfaces (BRI) and primary +rate interfaces (PRI). + Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI lingo) with Kernel CAPI to indicate their readiness to provide their service @@ -12,6 +17,9 @@ application registration to an available device, forwarding it to the corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both directions between the application and the hardware driver. +Format and semantics of CAPI messages are specified in the CAPI 2.0 standard. +This standard is freely available from http://www.capi.org. + 2. Driver and Device Registration @@ -53,12 +61,10 @@ open() operation on regular files or character devices. After a successful return from register_appl(), CAPI messages from the application may be passed to the driver for the device via calls to the send_message() callback function. The CAPI message to send is stored in the -data portion of a skb. Conversely, the driver may call Kernel CAPI's +data portion of an skb. Conversely, the driver may call Kernel CAPI's capi_ctr_handle_message() function to pass a received CAPI message to Kernel CAPI for forwarding to an application, specifying its ApplID. -Format and semantics of CAPI messages are specified in the CAPI 2.0 standard. - Deregistration requests (CAPI operation CAPI_RELEASE) from applications are forwarded as calls to the release_appl() callback function, passing the same ApplID as with register_appl(). After return from release_appl(), no CAPI @@ -75,9 +81,9 @@ the following non-private fields, all to be set by the driver before calling register_capi_driver(): char name[32] - the name of the driver, as a zero terminated ASCII string + the name of the driver, as a zero-terminated ASCII string char revision[32] - the revision number of the driver, as a zero terminated ASCII string + the revision number of the driver, as a zero-terminated ASCII string int (*add_card)(struct capi_driver *driver, capicardparams *data) a callback function pointer (may be NULL) @@ -100,10 +106,10 @@ void *driverdata an opaque pointer to driver specific data, not touched by Kernel CAPI char name[32] - the name of the controller, as a zero terminated ASCII string + the name of the controller, as a zero-terminated ASCII string char *driver_name - the name of the driver, as a zero terminated ASCII string + the name of the driver, as a zero-terminated ASCII string int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata) (optional) pointer to a callback function for sending firmware and -- cgit v0.10.2 From 45c06543afe2772c02f21efee0e2138b4e1c911e Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 27 Apr 2009 07:49:10 -0400 Subject: Btrfs: remove unused btrfs_bit_radix slab Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 552e08a..98bd506 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -70,7 +70,6 @@ static struct extent_io_ops btrfs_extent_io_ops; static struct kmem_cache *btrfs_inode_cachep; struct kmem_cache *btrfs_trans_handle_cachep; struct kmem_cache *btrfs_transaction_cachep; -struct kmem_cache *btrfs_bit_radix_cachep; struct kmem_cache *btrfs_path_cachep; #define S_SHIFT 12 @@ -4641,8 +4640,6 @@ void btrfs_destroy_cachep(void) kmem_cache_destroy(btrfs_trans_handle_cachep); if (btrfs_transaction_cachep) kmem_cache_destroy(btrfs_transaction_cachep); - if (btrfs_bit_radix_cachep) - kmem_cache_destroy(btrfs_bit_radix_cachep); if (btrfs_path_cachep) kmem_cache_destroy(btrfs_path_cachep); } @@ -4673,11 +4670,6 @@ int btrfs_init_cachep(void) if (!btrfs_path_cachep) goto fail; - btrfs_bit_radix_cachep = kmem_cache_create("btrfs_radix", 256, 0, - SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD | - SLAB_DESTROY_BY_RCU, NULL); - if (!btrfs_bit_radix_cachep) - goto fail; return 0; fail: btrfs_destroy_cachep(); -- cgit v0.10.2 From e63b6a6c0ffa2ebd8617cc1a10969000296831aa Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Tue, 21 Apr 2009 12:38:30 -0700 Subject: Btrfs: Fix a trivial warning using max() of u64 vs ULL. A small warning popped up on ia64 because inode-map.c was comparing a u64 object id with the ULL FIRST_FREE_OBJECTID. My first thought was that all the OBJECTID constants should contain the u64 cast because btrfs code deals entirely in u64s. But then I saw how large that was, and figured I'd just fix the max() call. Signed-off-by: Joel Becker Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index cc7334d..9abbced 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -79,7 +79,7 @@ int btrfs_find_free_objectid(struct btrfs_trans_handle *trans, } path = btrfs_alloc_path(); BUG_ON(!path); - search_start = max(search_start, BTRFS_FIRST_FREE_OBJECTID); + search_start = max(search_start, (u64)BTRFS_FIRST_FREE_OBJECTID); search_key.objectid = search_start; search_key.type = 0; search_key.offset = 0; -- cgit v0.10.2 From 21380931eb4da4e29ac663d0221581282cbba208 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Tue, 21 Apr 2009 12:38:29 -0700 Subject: Btrfs: Fix a bunch of printk() warnings. Just happened to notice a bunch of %llu vs u64 warnings. Here's a patch to cast them all. Signed-off-by: Joel Becker Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index aa0c259..0ff16d3 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1671,7 +1671,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, if (features) { printk(KERN_ERR "BTRFS: couldn't mount because of " "unsupported optional features (%Lx).\n", - features); + (unsigned long long)features); err = -EINVAL; goto fail_iput; } @@ -1681,7 +1681,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, if (!(sb->s_flags & MS_RDONLY) && features) { printk(KERN_ERR "BTRFS: couldn't mount RDWR because of " "unsupported option features (%Lx).\n", - features); + (unsigned long long)features); err = -EINVAL; goto fail_iput; } @@ -2273,7 +2273,7 @@ int close_ctree(struct btrfs_root *root) if (fs_info->delalloc_bytes) { printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n", - fs_info->delalloc_bytes); + (unsigned long long)fs_info->delalloc_bytes); } if (fs_info->total_ref_cache_size) { printk(KERN_INFO "btrfs: at umount reference cache size %llu\n", diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 2895a83..e496644 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -1844,10 +1844,14 @@ again: printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes" ", %llu bytes_used, %llu bytes_reserved, " "%llu bytes_pinned, %llu bytes_readonly, %llu may use" - "%llu total\n", bytes, data_sinfo->bytes_delalloc, - data_sinfo->bytes_used, data_sinfo->bytes_reserved, - data_sinfo->bytes_pinned, data_sinfo->bytes_readonly, - data_sinfo->bytes_may_use, data_sinfo->total_bytes); + "%llu total\n", (unsigned long long)bytes, + (unsigned long long)data_sinfo->bytes_delalloc, + (unsigned long long)data_sinfo->bytes_used, + (unsigned long long)data_sinfo->bytes_reserved, + (unsigned long long)data_sinfo->bytes_pinned, + (unsigned long long)data_sinfo->bytes_readonly, + (unsigned long long)data_sinfo->bytes_may_use, + (unsigned long long)data_sinfo->total_bytes); return -ENOSPC; } data_sinfo->bytes_may_use += bytes; @@ -2824,9 +2828,12 @@ static void dump_space_info(struct btrfs_space_info *info, u64 bytes) info->bytes_pinned - info->bytes_reserved), (info->full) ? "" : "not "); printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu," - " may_use=%llu, used=%llu\n", info->total_bytes, - info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use, - info->bytes_used); + " may_use=%llu, used=%llu\n", + (unsigned long long)info->total_bytes, + (unsigned long long)info->bytes_pinned, + (unsigned long long)info->bytes_delalloc, + (unsigned long long)info->bytes_may_use, + (unsigned long long)info->bytes_used); down_read(&info->groups_sem); list_for_each_entry(cache, &info->block_groups, list) { diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 768b952..0bc9365 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -332,13 +332,17 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, printk(KERN_ERR "couldn't find space %llu to free\n", (unsigned long long)offset); printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n", - block_group->cached, block_group->key.objectid, - block_group->key.offset); + block_group->cached, + (unsigned long long)block_group->key.objectid, + (unsigned long long)block_group->key.offset); btrfs_dump_free_space(block_group, bytes); } else if (info) { printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, " "but wanted offset=%llu bytes=%llu\n", - info->offset, info->bytes, offset, bytes); + (unsigned long long)info->offset, + (unsigned long long)info->bytes, + (unsigned long long)offset, + (unsigned long long)bytes); } WARN_ON(1); } @@ -357,8 +361,9 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group, info = rb_entry(n, struct btrfs_free_space, offset_index); if (info->bytes >= bytes) count++; - printk(KERN_ERR "entry offset %llu, bytes %llu\n", info->offset, - info->bytes); + printk(KERN_ERR "entry offset %llu, bytes %llu\n", + (unsigned long long)info->offset, + (unsigned long long)info->bytes); } printk(KERN_INFO "%d blocks of free space at or bigger than bytes is" "\n", count); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index f4e5d2e..48762aa 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -483,11 +483,13 @@ static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg) *devstr = '\0'; devstr = vol_args->name; devid = simple_strtoull(devstr, &end, 10); - printk(KERN_INFO "resizing devid %llu\n", devid); + printk(KERN_INFO "resizing devid %llu\n", + (unsigned long long)devid); } device = btrfs_find_device(root, devid, NULL, NULL); if (!device) { - printk(KERN_INFO "resizer unable to find device %llu\n", devid); + printk(KERN_INFO "resizer unable to find device %llu\n", + (unsigned long long)devid); ret = -EINVAL; goto out_unlock; } diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 30c9a8c..bf0e84c 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -196,7 +196,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) info->max_extent = max_t(u64, info->max_extent, root->sectorsize); printk(KERN_INFO "btrfs: max_extent at %llu\n", - info->max_extent); + (unsigned long long)info->max_extent); } break; case Opt_max_inline: @@ -211,7 +211,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) root->sectorsize); } printk(KERN_INFO "btrfs: max_inline at %llu\n", - info->max_inline); + (unsigned long long)info->max_inline); } break; case Opt_alloc_start: @@ -221,7 +221,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) kfree(num); printk(KERN_INFO "btrfs: allocations start at %llu\n", - info->alloc_start); + (unsigned long long)info->alloc_start); } break; case Opt_noacl: @@ -420,11 +420,14 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs) if (btrfs_test_opt(root, NOBARRIER)) seq_puts(seq, ",nobarrier"); if (info->max_extent != (u64)-1) - seq_printf(seq, ",max_extent=%llu", info->max_extent); + seq_printf(seq, ",max_extent=%llu", + (unsigned long long)info->max_extent); if (info->max_inline != 8192 * 1024) - seq_printf(seq, ",max_inline=%llu", info->max_inline); + seq_printf(seq, ",max_inline=%llu", + (unsigned long long)info->max_inline); if (info->alloc_start != 0) - seq_printf(seq, ",alloc_start=%llu", info->alloc_start); + seq_printf(seq, ",alloc_start=%llu", + (unsigned long long)info->alloc_start); if (info->thread_pool_size != min_t(unsigned long, num_online_cpus() + 2, 8)) seq_printf(seq, ",thread_pool=%d", info->thread_pool_size); -- cgit v0.10.2 From c9503e0fe052020e0294cd07d0ecd982eb7c9177 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 27 Apr 2009 05:42:24 -0700 Subject: ipv4: Limit size of route cache hash table Right now we have no upper limit on the size of the route cache hash table. On a 128GB POWER6 box it ends up as 32MB: IP route cache hash table entries: 4194304 (order: 9, 33554432 bytes) It would be nice to cap this for memory consumption reasons, but a massive hashtable also causes a significant spike when measuring OS jitter. With a 32MB hashtable and 4 million entries, rt_worker_func is taking 5 ms to complete. On another system with more memory it's taking 14 ms. Even though rt_worker_func does call cond_sched() to limit its impact, in an HPC environment we want to keep all sources of OS jitter to a minimum. With the patch applied we limit the number of entries to 512k which can still be overriden by using the rt_entries boot option: IP route cache hash table entries: 524288 (order: 6, 4194304 bytes) With this patch rt_worker_func now takes 0.460 ms on the same system. Signed-off-by: Anton Blanchard Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index c40debe..c4c60e9 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3397,7 +3397,7 @@ int __init ip_rt_init(void) 0, &rt_hash_log, &rt_hash_mask, - 0); + rhash_entries ? 0 : 512 * 1024); memset(rt_hash_table, 0, (rt_hash_mask + 1) * sizeof(struct rt_hash_bucket)); rt_hash_lock_init(); -- cgit v0.10.2 From 37b607c5ac3b7c92a6a3624bb29f1cdcdcf7044a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 27 Apr 2009 05:45:54 -0700 Subject: net: Fix typo in net_device_ops description. Signed-off-by: Mike Rapoport Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 453be9a..5a96a1a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -500,7 +500,7 @@ struct netdev_queue { * * int (*ndo_set_mac_address)(struct net_device *dev, void *addr); * This function is called when the Media Access Control address - * needs to be changed. If not this interface is not defined, the + * needs to be changed. If this interface is not defined, the * mac address can not be changed. * * int (*ndo_validate_addr)(struct net_device *dev); -- cgit v0.10.2 From 96bcc722c47d07b6fd05c9d0cb3ab8ea5574c5b1 Mon Sep 17 00:00:00 2001 From: Peter Jones Date: Fri, 11 Jul 2008 16:17:05 -0400 Subject: [SCSI] sr: report more accurate drive status after closing the tray. So, what's happening here is that the drive is reporting a sense of 2/4/1 ("logical unit is becoming ready") from sr_test_unit_ready(), and then we ask for the media event notification before checking that result at all. The check_media_event_descriptor() call isn't getting a check condition, but it's also reporting that the tray is closed and that there's no media. In actuality it doesn't yet know if there's media or not, but there's no way to express that in the media event status field. My current thought is that if it told us the device isn't yet ready, we should return that immediately, since there's nothing that'll tell us any more data than that reliably: Signed-off-by: James Bottomley diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index d92ff51..291236e 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -309,6 +309,11 @@ int sr_drive_status(struct cdrom_device_info *cdi, int slot) if (0 == sr_test_unit_ready(cd->device, &sshdr)) return CDS_DISC_OK; + /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */ + if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY + && sshdr.asc == 0x04 && sshdr.ascq == 0x01) + return CDS_DRIVE_NOT_READY; + if (!cdrom_get_media_event(cdi, &med)) { if (med.media_present) return CDS_DISC_OK; -- cgit v0.10.2 From e7ee4cc04b058d1eae9c1ac359031301b1798e3f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sat, 4 Apr 2009 00:35:42 +0900 Subject: [SCSI] sg: return EFAULT for an invalid user address blk_rq_unmap_user() returns EFAULT if a program passes an invalid address to kernel (the kernel fails to copy data to user space). sg needs to pass the returned value to user space instead of ignoring it. Before the block layer conversion, sg returns EFAULT properly. This restores the old behavior. Signed-off-by: FUJITA Tomonori Acked-by: Douglas Gilbert Signed-off-by: James Bottomley diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 82312df..e1716f1 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -179,7 +179,7 @@ typedef struct sg_device { /* holds the state of each scsi generic device */ /* tasklet or soft irq callback */ static void sg_rq_end_io(struct request *rq, int uptodate); static int sg_start_req(Sg_request *srp, unsigned char *cmd); -static void sg_finish_rem_req(Sg_request * srp); +static int sg_finish_rem_req(Sg_request * srp); static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size); static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp); @@ -518,7 +518,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp) goto err_out; } err_out: - sg_finish_rem_req(srp); + err = sg_finish_rem_req(srp); return (0 == err) ? count : err; } @@ -1696,9 +1696,10 @@ static int sg_start_req(Sg_request *srp, unsigned char *cmd) return res; } -static void -sg_finish_rem_req(Sg_request * srp) +static int sg_finish_rem_req(Sg_request * srp) { + int ret = 0; + Sg_fd *sfp = srp->parentfp; Sg_scatter_hold *req_schp = &srp->data; @@ -1710,12 +1711,14 @@ sg_finish_rem_req(Sg_request * srp) if (srp->rq) { if (srp->bio) - blk_rq_unmap_user(srp->bio); + ret = blk_rq_unmap_user(srp->bio); blk_put_request(srp->rq); } sg_remove_request(sfp, srp); + + return ret; } static int -- cgit v0.10.2 From 3621a710a7dbb2d22a8e95d94bcf0c2d13ef57fc Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 6 Apr 2009 18:47:14 -0400 Subject: [SCSI] lpfc 8.3.1 : Fix up kernel-doc function comments Signed-off-by: James Smart Signed-off-by: James Bottomley diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 40cf0f4..69296cd 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -51,7 +51,7 @@ #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8" /** - * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules. + * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules * @incr: integer to convert. * @hdw: ascii string holding converted integer plus a string terminator. * @@ -82,7 +82,7 @@ lpfc_jedec_to_ascii(int incr, char hdw[]) } /** - * lpfc_drvr_version_show: Return the Emulex driver string with version number. + * lpfc_drvr_version_show - Return the Emulex driver string with version number * @dev: class unused variable. * @attr: device attribute, not used. * @buf: on return contains the module description text. @@ -152,7 +152,7 @@ lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_info_show: Return some pci info about the host in ascii. + * lpfc_info_show - Return some pci info about the host in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text from lpfc_info(). @@ -169,7 +169,7 @@ lpfc_info_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_serialnum_show: Return the hba serial number in ascii. + * lpfc_serialnum_show - Return the hba serial number in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text serial number. @@ -188,7 +188,7 @@ lpfc_serialnum_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_temp_sensor_show: Return the temperature sensor level. + * lpfc_temp_sensor_show - Return the temperature sensor level * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted support level. @@ -210,7 +210,7 @@ lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_modeldesc_show: Return the model description of the hba. + * lpfc_modeldesc_show - Return the model description of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model description. @@ -229,7 +229,7 @@ lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_modelname_show: Return the model name of the hba. + * lpfc_modelname_show - Return the model name of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model name. @@ -248,7 +248,7 @@ lpfc_modelname_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_programtype_show: Return the program type of the hba. + * lpfc_programtype_show - Return the program type of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -267,7 +267,7 @@ lpfc_programtype_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag. + * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the Menlo Maintenance sli flag. @@ -286,7 +286,7 @@ lpfc_mlomgmt_show(struct device *dev, struct device_attribute *attr, char *buf) } /** - * lpfc_vportnum_show: Return the port number in ascii of the hba. + * lpfc_vportnum_show - Return the port number in ascii of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains scsi vpd program type. @@ -305,7 +305,7 @@ lpfc_vportnum_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_fwrev_show: Return the firmware rev running in the hba. + * lpfc_fwrev_show - Return the firmware rev running in the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -326,7 +326,7 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_hdw_show: Return the jedec information about the hba. + * lpfc_hdw_show - Return the jedec information about the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -347,7 +347,7 @@ lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf) } /** - * lpfc_option_rom_version_show: Return the adapter ROM FCode version. + * lpfc_option_rom_version_show - Return the adapter ROM FCode version * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the ROM and FCode ascii strings. @@ -366,7 +366,7 @@ lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_state_show: Return the link state of the port. + * lpfc_state_show - Return the link state of the port * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains text describing the state of the link. @@ -451,7 +451,7 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports. + * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the sum of fc mapped and unmapped. @@ -474,7 +474,7 @@ lpfc_num_discovered_ports_show(struct device *dev, } /** - * lpfc_issue_lip: Misnomer, name carried over from long ago. + * lpfc_issue_lip - Misnomer, name carried over from long ago * @shost: Scsi_Host pointer. * * Description: @@ -529,7 +529,7 @@ lpfc_issue_lip(struct Scsi_Host *shost) } /** - * lpfc_do_offline: Issues a mailbox command to bring the link down. + * lpfc_do_offline - Issues a mailbox command to bring the link down * @phba: lpfc_hba pointer. * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL. * @@ -537,7 +537,7 @@ lpfc_issue_lip(struct Scsi_Host *shost) * Assumes any error from lpfc_do_offline() will be negative. * Can wait up to 5 seconds for the port ring buffers count * to reach zero, prints a warning if it is not zero and continues. - * lpfc_workq_post_event() returns a non-zero return coce if call fails. + * lpfc_workq_post_event() returns a non-zero return code if call fails. * * Returns: * -EIO error posting the event @@ -591,7 +591,7 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) } /** - * lpfc_selective_reset: Offline then onlines the port. + * lpfc_selective_reset - Offline then onlines the port * @phba: lpfc_hba pointer. * * Description: @@ -632,7 +632,7 @@ lpfc_selective_reset(struct lpfc_hba *phba) } /** - * lpfc_issue_reset: Selectively resets an adapter. + * lpfc_issue_reset - Selectively resets an adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string "selective". @@ -672,7 +672,7 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, } /** - * lpfc_nport_evt_cnt_show: Return the number of nport events. + * lpfc_nport_evt_cnt_show - Return the number of nport events * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the ascii number of nport events. @@ -691,7 +691,7 @@ lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_board_mode_show: Return the state of the board. + * lpfc_board_mode_show - Return the state of the board * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the state of the adapter. @@ -720,7 +720,7 @@ lpfc_board_mode_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state. + * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing one of the strings "online", "offline", "warm" or "error". @@ -766,14 +766,14 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, } /** - * lpfc_get_hba_info: Return various bits of informaton about the adapter. + * lpfc_get_hba_info - Return various bits of informaton about the adapter * @phba: pointer to the adapter structure. - * @mxri max xri count. - * @axri available xri count. - * @mrpi max rpi count. - * @arpi available rpi count. - * @mvpi max vpi count. - * @avpi available vpi count. + * @mxri: max xri count. + * @axri: available xri count. + * @mrpi: max rpi count. + * @arpi: available rpi count. + * @mvpi: max vpi count. + * @avpi: available vpi count. * * Description: * If an integer pointer for an count is not null then the value for the @@ -846,7 +846,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba, } /** - * lpfc_max_rpi_show: Return maximum rpi. + * lpfc_max_rpi_show - Return maximum rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum rpi count in decimal or "Unknown". @@ -874,7 +874,7 @@ lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_used_rpi_show: Return maximum rpi minus available rpi. + * lpfc_used_rpi_show - Return maximum rpi minus available rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the used rpi count in decimal or "Unknown". @@ -902,7 +902,7 @@ lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_max_xri_show: Return maximum xri. + * lpfc_max_xri_show - Return maximum xri * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum xri count in decimal or "Unknown". @@ -930,7 +930,7 @@ lpfc_max_xri_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_used_xri_show: Return maximum xpi minus the available xpi. + * lpfc_used_xri_show - Return maximum xpi minus the available xpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used xri count in decimal or "Unknown". @@ -958,7 +958,7 @@ lpfc_used_xri_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_max_vpi_show: Return maximum vpi. + * lpfc_max_vpi_show - Return maximum vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum vpi count in decimal or "Unknown". @@ -986,7 +986,7 @@ lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_used_vpi_show: Return maximum vpi minus the available vpi. + * lpfc_used_vpi_show - Return maximum vpi minus the available vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used vpi count in decimal or "Unknown". @@ -1014,7 +1014,7 @@ lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_npiv_info_show: Return text about NPIV support for the adapter. + * lpfc_npiv_info_show - Return text about NPIV support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: text that must be interpreted to determine if npiv is supported. @@ -1042,7 +1042,7 @@ lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_poll_show: Return text about poll support for the adapter. + * lpfc_poll_show - Return text about poll support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the cfg_poll in hex. @@ -1064,7 +1064,7 @@ lpfc_poll_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_poll_store: Set the value of cfg_poll for the adapter. + * lpfc_poll_store - Set the value of cfg_poll for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: one or more lpfc_polling_flags values. @@ -1136,7 +1136,7 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr, } /** - * lpfc_param_show: Return a cfg attribute value in decimal. + * lpfc_param_show - Return a cfg attribute value in decimal * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1164,7 +1164,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_param_hex_show: Return a cfg attribute value in hex. + * lpfc_param_hex_show - Return a cfg attribute value in hex * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1173,7 +1173,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the attribute value in hexidecimal. + * @buf: on return contains the attribute value in hexadecimal. * * Returns: size of formatted string. **/ @@ -1192,7 +1192,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_param_init: Intializes a cfg attribute. + * lpfc_param_init - Intializes a cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1226,7 +1226,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, int val) \ } /** - * lpfc_param_set: Set a cfg attribute value. + * lpfc_param_set - Set a cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1260,7 +1260,7 @@ lpfc_##attr##_set(struct lpfc_hba *phba, int val) \ } /** - * lpfc_param_store: Set a vport attribute value. + * lpfc_param_store - Set a vport attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1300,7 +1300,7 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_vport_param_show: Return decimal formatted cfg attribute value. + * lpfc_vport_param_show - Return decimal formatted cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1326,17 +1326,17 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_vport_param_hex_show: Return hex formatted attribute value. + * lpfc_vport_param_hex_show - Return hex formatted attribute value * * Description: * Macro that given an attr e.g. * hba_queue_depth expands into a function with the name * lpfc_hba_queue_depth_show * - * lpfc_##attr##_show: prints the attribute value in hexidecimal. + * lpfc_##attr##_show: prints the attribute value in hexadecimal. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the attribute value in hexidecimal. + * @buf: on return contains the attribute value in hexadecimal. * * Returns: length of formatted string. **/ @@ -1353,7 +1353,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_vport_param_init: Initialize a vport cfg attribute. + * lpfc_vport_param_init - Initialize a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1386,7 +1386,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \ } /** - * lpfc_vport_param_set: Set a vport cfg attribute. + * lpfc_vport_param_set - Set a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1417,7 +1417,7 @@ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \ } /** - * lpfc_vport_param_store: Set a vport attribute. + * lpfc_vport_param_store - Set a vport attribute * * Description: * Macro that given an attr e.g. hba_queue_depth @@ -1576,7 +1576,7 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL); static char *lpfc_soft_wwn_key = "C99G71SL8032A"; /** - * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid. + * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string lpfc_soft_wwn_key. @@ -1623,10 +1623,10 @@ static DEVICE_ATTR(lpfc_soft_wwn_enable, S_IWUSR, NULL, lpfc_soft_wwn_enable_store); /** - * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter. + * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the wwpn in hexidecimal. + * @buf: on return contains the wwpn in hexadecimal. * * Returns: size of formatted string. **/ @@ -1643,10 +1643,10 @@ lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_soft_wwpn_store: Set the ww port name of the adapter. + * lpfc_soft_wwpn_store - Set the ww port name of the adapter * @dev class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: contains the wwpn in hexidecimal. + * @buf: contains the wwpn in hexadecimal. * @count: number of wwpn bytes in buf * * Returns: @@ -1729,10 +1729,10 @@ static DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\ lpfc_soft_wwpn_show, lpfc_soft_wwpn_store); /** - * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter. + * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the wwnn in hexidecimal. + * @buf: on return contains the wwnn in hexadecimal. * * Returns: size of formatted string. **/ @@ -1747,9 +1747,9 @@ lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_soft_wwnn_store: sets the ww node name of the adapter. + * lpfc_soft_wwnn_store - sets the ww node name of the adapter * @cdev: class device that is converted into a Scsi_host. - * @buf: contains the ww node name in hexidecimal. + * @buf: contains the ww node name in hexadecimal. * @count: number of wwnn bytes in buf. * * Returns: @@ -1845,7 +1845,7 @@ MODULE_PARM_DESC(lpfc_nodev_tmo, "for a device to come back"); /** - * lpfc_nodev_tmo_show: Return the hba dev loss timeout value. + * lpfc_nodev_tmo_show - Return the hba dev loss timeout value * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the dev loss timeout in decimal. @@ -1864,7 +1864,7 @@ lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_nodev_tmo_init: Set the hba nodev timeout value. + * lpfc_nodev_tmo_init - Set the hba nodev timeout value * @vport: lpfc vport structure pointer. * @val: contains the nodev timeout value. * @@ -1905,7 +1905,7 @@ lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) } /** - * lpfc_update_rport_devloss_tmo: Update dev loss tmo value. + * lpfc_update_rport_devloss_tmo - Update dev loss tmo value * @vport: lpfc vport structure pointer. * * Description: @@ -1926,7 +1926,7 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) } /** - * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values. + * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * @@ -1982,7 +1982,7 @@ lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO, lpfc_vport_param_show(devloss_tmo) /** - * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit. + * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * @@ -2094,7 +2094,7 @@ MODULE_PARM_DESC(lpfc_restrict_login, lpfc_vport_param_show(restrict_login); /** - * lpfc_restrict_login_init: Set the vport restrict login flag. + * lpfc_restrict_login_init - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * @@ -2128,7 +2128,7 @@ lpfc_restrict_login_init(struct lpfc_vport *vport, int val) } /** - * lpfc_restrict_login_set: Set the vport restrict login flag. + * lpfc_restrict_login_set - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * @@ -2201,7 +2201,7 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, */ /** - * lpfc_topology_set: Set the adapters topology field. + * lpfc_topology_set - Set the adapters topology field * @phba: lpfc_hba pointer. * @val: topology value. * @@ -2246,8 +2246,7 @@ static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, /** - * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl - * sysfs file. + * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file * @dev: Pointer to class device. * @buf: Data buffer. * @count: Size of the data buffer. @@ -2411,8 +2410,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr, /** - * lpfc_stat_data_ctrl_show: Read callback function for - * lpfc_stat_data_ctrl sysfs file. + * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file * @dev: Pointer to class device object. * @buf: Data buffer. * @@ -2489,8 +2487,7 @@ static DEVICE_ATTR(lpfc_stat_data_ctrl, S_IRUGO | S_IWUSR, /** - * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data - * sysfs attribute. + * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute * @kobj: Pointer to the kernel object * @bin_attr: Attribute object * @buff: Buffer pointer @@ -2585,7 +2582,7 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = { */ /** - * lpfc_link_speed_set: Set the adapters link speed. + * lpfc_link_speed_set - Set the adapters link speed * @phba: lpfc_hba pointer. * @val: link speed value. * @@ -2637,7 +2634,7 @@ MODULE_PARM_DESC(lpfc_link_speed, "Select link speed"); lpfc_param_show(link_speed) /** - * lpfc_link_speed_init: Set the adapters link speed. + * lpfc_link_speed_init - Set the adapters link speed * @phba: lpfc_hba pointer. * @val: link speed value. * @@ -2865,7 +2862,7 @@ MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type"); /* - * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count + * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count * This value can be set to values between 64 and 256. The default value is * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE). @@ -2967,7 +2964,7 @@ struct device_attribute *lpfc_vport_attrs[] = { }; /** - * sysfs_ctlreg_write: Write method for writing to ctlreg. + * sysfs_ctlreg_write - Write method for writing to ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to the adapter IOREG space. @@ -3017,7 +3014,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, } /** - * sysfs_ctlreg_read: Read method for reading from ctlreg. + * sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: if succesful contains the data from the adapter IOREG space. @@ -3078,7 +3075,7 @@ static struct bin_attribute sysfs_ctlreg_attr = { }; /** - * sysfs_mbox_idle: frees the sysfs mailbox. + * sysfs_mbox_idle - frees the sysfs mailbox * @phba: lpfc_hba pointer **/ static void @@ -3095,7 +3092,7 @@ sysfs_mbox_idle(struct lpfc_hba *phba) } /** - * sysfs_mbox_write: Write method for writing information via mbox. + * sysfs_mbox_write - Write method for writing information via mbox * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to sysfs mbox. @@ -3170,7 +3167,7 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr, } /** - * sysfs_mbox_read: Read method for reading information via mbox. + * sysfs_mbox_read - Read method for reading information via mbox * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be read from sysfs mbox. @@ -3374,7 +3371,7 @@ static struct bin_attribute sysfs_mbox_attr = { }; /** - * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries. + * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries * @vport: address of lpfc vport structure. * * Return codes: @@ -3415,7 +3412,7 @@ out: } /** - * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries. + * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries * @vport: address of lpfc vport structure. **/ void @@ -3437,7 +3434,7 @@ lpfc_free_sysfs_attr(struct lpfc_vport *vport) */ /** - * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id. + * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id * @shost: kernel scsi host pointer. **/ static void @@ -3450,7 +3447,7 @@ lpfc_get_host_port_id(struct Scsi_Host *shost) } /** - * lpfc_get_host_port_type: Set the value of the scsi host port type. + * lpfc_get_host_port_type - Set the value of the scsi host port type * @shost: kernel scsi host pointer. **/ static void @@ -3482,7 +3479,7 @@ lpfc_get_host_port_type(struct Scsi_Host *shost) } /** - * lpfc_get_host_port_state: Set the value of the scsi host port state. + * lpfc_get_host_port_state - Set the value of the scsi host port state * @shost: kernel scsi host pointer. **/ static void @@ -3520,7 +3517,7 @@ lpfc_get_host_port_state(struct Scsi_Host *shost) } /** - * lpfc_get_host_speed: Set the value of the scsi host speed. + * lpfc_get_host_speed - Set the value of the scsi host speed * @shost: kernel scsi host pointer. **/ static void @@ -3556,7 +3553,7 @@ lpfc_get_host_speed(struct Scsi_Host *shost) } /** - * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name. + * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name * @shost: kernel scsi host pointer. **/ static void @@ -3582,7 +3579,7 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost) } /** - * lpfc_get_stats: Return statistical information about the adapter. + * lpfc_get_stats - Return statistical information about the adapter * @shost: kernel scsi host pointer. * * Notes: @@ -3707,7 +3704,7 @@ lpfc_get_stats(struct Scsi_Host *shost) } /** - * lpfc_reset_stats: Copy the adapter link stats information. + * lpfc_reset_stats - Copy the adapter link stats information * @shost: kernel scsi host pointer. **/ static void @@ -3788,7 +3785,7 @@ lpfc_reset_stats(struct Scsi_Host *shost) */ /** - * lpfc_get_node_by_target: Return the nodelist for a target. + * lpfc_get_node_by_target - Return the nodelist for a target * @starget: kernel scsi target pointer. * * Returns: @@ -3817,7 +3814,7 @@ lpfc_get_node_by_target(struct scsi_target *starget) } /** - * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1. + * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1 * @starget: kernel scsi target pointer. **/ static void @@ -3829,7 +3826,7 @@ lpfc_get_starget_port_id(struct scsi_target *starget) } /** - * lpfc_get_starget_node_name: Set the target node name. + * lpfc_get_starget_node_name - Set the target node name * @starget: kernel scsi target pointer. * * Description: Set the target node name to the ndlp node name wwn or zero. @@ -3844,7 +3841,7 @@ lpfc_get_starget_node_name(struct scsi_target *starget) } /** - * lpfc_get_starget_port_name: Set the target port name. + * lpfc_get_starget_port_name - Set the target port name * @starget: kernel scsi target pointer. * * Description: set the target port name to the ndlp port name wwn or zero. @@ -3859,7 +3856,7 @@ lpfc_get_starget_port_name(struct scsi_target *starget) } /** - * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo. + * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo * @rport: fc rport address. * @timeout: new value for dev loss tmo. * @@ -3877,7 +3874,7 @@ lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) } /** - * lpfc_rport_show_function: Return rport target information. + * lpfc_rport_show_function - Return rport target information * * Description: * Macro that uses field to generate a function with the name lpfc_show_rport_ @@ -3905,7 +3902,7 @@ lpfc_show_rport_##field (struct device *dev, \ static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL) /** - * lpfc_set_vport_symbolic_name: Set the vport's symbolic name. + * lpfc_set_vport_symbolic_name - Set the vport's symbolic name * @fc_vport: The fc_vport who's symbolic name has been changed. * * Description: @@ -4048,7 +4045,7 @@ struct fc_function_template lpfc_vport_transport_functions = { }; /** - * lpfc_get_cfgparam: Used during probe_one to init the adapter structure. + * lpfc_get_cfgparam - Used during probe_one to init the adapter structure * @phba: lpfc_hba pointer. **/ void @@ -4097,7 +4094,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) } /** - * lpfc_get_vport_cfgparam: Used during port create, init the vport structure. + * lpfc_get_vport_cfgparam - Used during port create, init the vport structure * @vport: lpfc_vport pointer. **/ void diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 81cdcf4..abb870e 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -47,7 +47,7 @@ #include "lpfc_debugfs.h" #ifdef CONFIG_SCSI_LPFC_DEBUG_FS -/** +/* * debugfs interface * * To access this interface the user should: @@ -127,7 +127,7 @@ static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0); static unsigned long lpfc_debugfs_start_time = 0L; /** - * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer. + * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer * @vport: The vport to gather the log info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -187,7 +187,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) } /** - * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer. + * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer * @phba: The HBA to gather the log info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -250,7 +250,7 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size) static int lpfc_debugfs_last_hbq = -1; /** - * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer. + * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer * @phba: The HBA to gather host buffer info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -369,7 +369,7 @@ skipit: static int lpfc_debugfs_last_hba_slim_off; /** - * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer. + * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer * @phba: The HBA to gather SLIM info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -426,7 +426,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) } /** - * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer. + * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer * @phba: The HBA to gather Host SLIM info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -501,7 +501,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) } /** - * lpfc_debugfs_nodelist_data - Dump target node list to a buffer. + * lpfc_debugfs_nodelist_data - Dump target node list to a buffer * @vport: The vport to gather target node info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -599,7 +599,7 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) #endif /** - * lpfc_debugfs_disc_trc - Store discovery trace log. + * lpfc_debugfs_disc_trc - Store discovery trace log * @vport: The vport to associate this trace string with for retrieval. * @mask: Log entry classification. * @fmt: Format string to be displayed when dumping the log. @@ -643,7 +643,7 @@ lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt, } /** - * lpfc_debugfs_slow_ring_trc - Store slow ring trace log. + * lpfc_debugfs_slow_ring_trc - Store slow ring trace log * @phba: The phba to associate this trace string with for retrieval. * @fmt: Format string to be displayed when dumping the log. * @data1: 1st data parameter to be applied to @fmt. @@ -682,7 +682,7 @@ lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt, #ifdef CONFIG_SCSI_LPFC_DEBUG_FS /** - * lpfc_debugfs_disc_trc_open - Open the discovery trace log. + * lpfc_debugfs_disc_trc_open - Open the discovery trace log * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -732,7 +732,7 @@ out: } /** - * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log. + * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -782,7 +782,7 @@ out: } /** - * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer. + * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -824,7 +824,7 @@ out: } /** - * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer. + * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -866,7 +866,7 @@ out: } /** - * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer. + * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -993,7 +993,7 @@ lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf, /** - * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file. + * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -1035,7 +1035,7 @@ out: } /** - * lpfc_debugfs_lseek - Seek through a debugfs file. + * lpfc_debugfs_lseek - Seek through a debugfs file * @file: The file pointer to seek through. * @off: The offset to seek to or the amount to seek by. * @whence: Indicates how to seek. @@ -1073,7 +1073,7 @@ lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) } /** - * lpfc_debugfs_read - Read a debugfs file. + * lpfc_debugfs_read - Read a debugfs file * @file: The file pointer to read from. * @buf: The buffer to copy the data to. * @nbytes: The number of bytes to read. @@ -1098,7 +1098,7 @@ lpfc_debugfs_read(struct file *file, char __user *buf, } /** - * lpfc_debugfs_release - Release the buffer used to store debugfs file data. + * lpfc_debugfs_release - Release the buffer used to store debugfs file data * @inode: The inode pointer that contains a vport pointer. (unused) * @file: The file pointer that contains the buffer to release. * @@ -1210,7 +1210,7 @@ static atomic_t lpfc_debugfs_hba_count; #endif /** - * lpfc_debugfs_initialize - Initialize debugfs for a vport. + * lpfc_debugfs_initialize - Initialize debugfs for a vport * @vport: The vport pointer to initialize. * * Description: @@ -1434,7 +1434,7 @@ debug_failed: } /** - * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport. + * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport * @vport: The vport pointer to remove from debugfs. * * Description: diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index a730248..d32c98b 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -55,7 +55,7 @@ static void lpfc_register_new_vport(struct lpfc_hba *phba, static int lpfc_max_els_tries = 3; /** - * lpfc_els_chk_latt: Check host link attention event for a vport. + * lpfc_els_chk_latt - Check host link attention event for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether there is an outstanding host link @@ -116,7 +116,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vport) } /** - * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure. + * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure * @vport: pointer to a host virtual N_Port data structure. * @expectRsp: flag indicating whether response is expected. * @cmdSize: size of the ELS command. @@ -290,7 +290,7 @@ els_iocb_free_pcmb_exit: } /** - * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport. + * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues a fabric registration login for a @vport. An @@ -386,7 +386,7 @@ fail: } /** - * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port. + * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @sp: pointer to service parameter data structure. @@ -509,7 +509,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port. + * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @sp: pointer to service parameter data structure. @@ -626,7 +626,7 @@ fail: } /** - * lpfc_cmpl_els_flogi: Completion callback function for flogi. + * lpfc_cmpl_els_flogi - Completion callback function for flogi * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -751,7 +751,7 @@ out: } /** - * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport. + * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -849,7 +849,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs. + * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs * @phba: pointer to lpfc hba data structure. * * This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs @@ -898,7 +898,7 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba) } /** - * lpfc_initial_flogi: Issue an initial fabric login for a vport. + * lpfc_initial_flogi - Issue an initial fabric login for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues an initial Fabric Login (FLOGI) for the @vport @@ -949,7 +949,7 @@ lpfc_initial_flogi(struct lpfc_vport *vport) } /** - * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport. + * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues an initial Fabric Discover (FDISC) for the @vport @@ -998,7 +998,7 @@ lpfc_initial_fdisc(struct lpfc_vport *vport) } /** - * lpfc_more_plogi: Check and issue remaining plogis for a vport. + * lpfc_more_plogi - Check and issue remaining plogis for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether there are more remaining Port Logins @@ -1031,7 +1031,7 @@ lpfc_more_plogi(struct lpfc_vport *vport) } /** - * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp. + * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp * @phba: pointer to lpfc hba data structure. * @prsp: pointer to response IOCB payload. * @ndlp: pointer to a node-list data structure. @@ -1165,7 +1165,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, } /** - * lpfc_end_rscn: Check and handle more rscn for a vport. + * lpfc_end_rscn - Check and handle more rscn for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether more Registration State Change @@ -1197,7 +1197,7 @@ lpfc_end_rscn(struct lpfc_vport *vport) } /** - * lpfc_cmpl_els_plogi: Completion callback function for plogi. + * lpfc_cmpl_els_plogi - Completion callback function for plogi * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1322,7 +1322,7 @@ out: } /** - * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport. + * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @did: destination port identifier. * @retry: number of retries to the command IOCB. @@ -1401,7 +1401,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) } /** - * lpfc_cmpl_els_prli: Completion callback function for prli. + * lpfc_cmpl_els_prli - Completion callback function for prli * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1472,7 +1472,7 @@ out: } /** - * lpfc_issue_els_prli: Issue a prli iocb command for a vport. + * lpfc_issue_els_prli - Issue a prli iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1562,7 +1562,7 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_rscn_disc: Perform rscn discovery for a vport. + * lpfc_rscn_disc - Perform rscn discovery for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine performs Registration State Change Notification (RSCN) @@ -1588,7 +1588,7 @@ lpfc_rscn_disc(struct lpfc_vport *vport) } /** - * lpfc_adisc_done: Complete the adisc phase of discovery. + * lpfc_adisc_done - Complete the adisc phase of discovery * @vport: pointer to lpfc_vport hba data structure that finished all ADISCs. * * This function is called when the final ADISC is completed during discovery. @@ -1639,7 +1639,7 @@ lpfc_adisc_done(struct lpfc_vport *vport) } /** - * lpfc_more_adisc: Issue more adisc as needed. + * lpfc_more_adisc - Issue more adisc as needed * @vport: pointer to a host virtual N_Port data structure. * * This routine determines whether there are more ndlps on a @vport @@ -1672,7 +1672,7 @@ lpfc_more_adisc(struct lpfc_vport *vport) } /** - * lpfc_cmpl_els_adisc: Completion callback function for adisc. + * lpfc_cmpl_els_adisc - Completion callback function for adisc * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1760,7 +1760,7 @@ out: } /** - * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport. + * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1833,7 +1833,7 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_logo: Completion callback function for logo. + * lpfc_cmpl_els_logo - Completion callback function for logo * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1910,7 +1910,7 @@ out: } /** - * lpfc_issue_els_logo: Issue a logo to an node on a vport. + * lpfc_issue_els_logo - Issue a logo to an node on a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1991,7 +1991,7 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_cmd: Completion callback function for generic els command. + * lpfc_cmpl_els_cmd - Completion callback function for generic els command * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2031,7 +2031,7 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_issue_els_scr: Issue a scr to an node on a vport. + * lpfc_issue_els_scr - Issue a scr to an node on a vport * @vport: pointer to a host virtual N_Port data structure. * @nportid: N_Port identifier to the remote node. * @retry: number of retries to the command IOCB. @@ -2125,7 +2125,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) } /** - * lpfc_issue_els_farpr: Issue a farp to an node on a vport. + * lpfc_issue_els_farpr - Issue a farp to an node on a vport * @vport: pointer to a host virtual N_Port data structure. * @nportid: N_Port identifier to the remote node. * @retry: number of retries to the command IOCB. @@ -2236,7 +2236,7 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) } /** - * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry. + * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry * @vport: pointer to a host virtual N_Port data structure. * @nlp: pointer to a node-list data structure. * @@ -2291,7 +2291,7 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp) } /** - * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer. + * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer * @ptr: holder for the pointer to the timer function associated data (ndlp). * * This routine is invoked by the ndlp delayed-function timer to check @@ -2333,7 +2333,7 @@ lpfc_els_retry_delay(unsigned long ptr) } /** - * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function. + * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function * @ndlp: pointer to a node-list data structure. * * This routine is the worker-thread handler for processing the @ndlp delayed @@ -2404,7 +2404,7 @@ lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp) } /** - * lpfc_els_retry: Make retry decision on an els command iocb. + * lpfc_els_retry - Make retry decision on an els command iocb * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2732,7 +2732,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb. + * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb * @phba: pointer to lpfc hba data structure. * @buf_ptr1: pointer to the lpfc DMA buffer data structure. * @@ -2764,7 +2764,7 @@ lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) } /** - * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl. + * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl * @phba: pointer to lpfc hba data structure. * @buf_ptr: pointer to the lpfc dma buffer data structure. * @@ -2784,7 +2784,7 @@ lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr) } /** - * lpfc_els_free_iocb: Free a command iocb and its associated resources. + * lpfc_els_free_iocb - Free a command iocb and its associated resources * @phba: pointer to lpfc hba data structure. * @elsiocb: pointer to lpfc els command iocb data structure. * @@ -2877,7 +2877,7 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) } /** - * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response. + * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2931,7 +2931,7 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd. + * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -2965,7 +2965,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd. + * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -3136,7 +3136,7 @@ out: } /** - * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command. + * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command * @vport: pointer to a host virtual N_Port data structure. * @flag: the els command code to be accepted. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3275,7 +3275,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag, } /** - * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command. + * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command * @vport: pointer to a virtual N_Port data structure. * @rejectError: * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3356,7 +3356,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError, } /** - * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd. + * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd * @vport: pointer to a virtual N_Port data structure. * @oldiocb: pointer to the original lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -3431,7 +3431,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, } /** - * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd. + * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd * @vport: pointer to a virtual N_Port data structure. * @oldiocb: pointer to the original lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -3529,7 +3529,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, } /** - * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command. + * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command * @vport: pointer to a virtual N_Port data structure. * @format: rnid command format. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3635,7 +3635,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format, } /** - * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport. + * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues Address Discover (ADISC) ELS commands to those @@ -3693,7 +3693,7 @@ lpfc_els_disc_adisc(struct lpfc_vport *vport) } /** - * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc. + * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc * @vport: pointer to a host virtual N_Port data structure. * * This routine issues Port Login (PLOGI) ELS commands to all the N_Ports @@ -3752,7 +3752,7 @@ lpfc_els_disc_plogi(struct lpfc_vport *vport) } /** - * lpfc_els_flush_rscn: Clean up any rscn activities with a vport. + * lpfc_els_flush_rscn - Clean up any rscn activities with a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine cleans up any Registration State Change Notification @@ -3791,7 +3791,7 @@ lpfc_els_flush_rscn(struct lpfc_vport *vport) } /** - * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did. + * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did * @vport: pointer to a host virtual N_Port data structure. * @did: remote destination port identifier. * @@ -3866,7 +3866,7 @@ return_did_out: } /** - * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn + * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn * @vport: pointer to a host virtual N_Port data structure. * * This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the @@ -3895,7 +3895,7 @@ lpfc_rscn_recovery_check(struct lpfc_vport *vport) } /** - * lpfc_send_rscn_event: Send an RSCN event to management application. + * lpfc_send_rscn_event - Send an RSCN event to management application * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @@ -3938,7 +3938,7 @@ lpfc_send_rscn_event(struct lpfc_vport *vport, } /** - * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb. + * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4134,7 +4134,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_handle_rscn: Handle rscn for a vport. + * lpfc_els_handle_rscn - Handle rscn for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine handles the Registration State Configuration Notification @@ -4222,7 +4222,7 @@ lpfc_els_handle_rscn(struct lpfc_vport *vport) } /** - * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb. + * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4336,7 +4336,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb. + * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4391,7 +4391,7 @@ lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb. + * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4419,7 +4419,7 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd. + * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -4513,7 +4513,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_els_rcv_rps: Process an unsolicited rps iocb. + * lpfc_els_rcv_rps - Process an unsolicited rps iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4590,7 +4590,7 @@ reject_out: } /** - * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command. + * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command * @vport: pointer to a host virtual N_Port data structure. * @cmdsize: size of the ELS command. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -4662,7 +4662,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize, } /** - * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb. + * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4721,7 +4721,7 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_farp: Process an unsolicited farp request els command. + * lpfc_els_rcv_farp - Process an unsolicited farp request els command * @vport: pointer to a virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4804,7 +4804,7 @@ lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb. + * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4842,7 +4842,7 @@ lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_fan: Process an unsolicited fan iocb command. + * lpfc_els_rcv_fan - Process an unsolicited fan iocb command * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @fan_ndlp: pointer to a node-list data structure. @@ -4890,7 +4890,7 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_timeout: Handler funciton to the els timer. + * lpfc_els_timeout - Handler funciton to the els timer * @ptr: holder for the timer function associated data. * * This routine is invoked by the ELS timer after timeout. It posts the ELS @@ -4919,7 +4919,7 @@ lpfc_els_timeout(unsigned long ptr) } /** - * lpfc_els_timeout_handler: Process an els timeout event. + * lpfc_els_timeout_handler - Process an els timeout event * @vport: pointer to a virtual N_Port data structure. * * This routine is the actual handler function that processes an ELS timeout @@ -4994,7 +4994,7 @@ lpfc_els_timeout_handler(struct lpfc_vport *vport) } /** - * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport. + * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine is used to clean up all the outstanding ELS commands on a @@ -5076,7 +5076,7 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) } /** - * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA. + * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA * @phba: pointer to lpfc hba data structure. * * This routine is used to clean up all the outstanding ELS commands on a @@ -5137,7 +5137,7 @@ lpfc_els_flush_all_cmd(struct lpfc_hba *phba) } /** - * lpfc_send_els_failure_event: Posts an ELS command failure event. + * lpfc_send_els_failure_event - Posts an ELS command failure event * @phba: Pointer to hba context object. * @cmdiocbp: Pointer to command iocb which reported error. * @rspiocbp: Pointer to response iocb which reported error. @@ -5204,7 +5204,7 @@ lpfc_send_els_failure_event(struct lpfc_hba *phba, } /** - * lpfc_send_els_event: Posts unsolicited els event. + * lpfc_send_els_event - Posts unsolicited els event * @vport: Pointer to vport object. * @ndlp: Pointer FC node object. * @cmd: ELS command code. @@ -5284,7 +5284,7 @@ lpfc_send_els_event(struct lpfc_vport *vport, /** - * lpfc_els_unsol_buffer: Process an unsolicited event data buffer. + * lpfc_els_unsol_buffer - Process an unsolicited event data buffer * @phba: pointer to lpfc hba data structure. * @pring: pointer to a SLI ring. * @vport: pointer to a host virtual N_Port data structure. @@ -5592,7 +5592,7 @@ dropit: } /** - * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier. + * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier * @phba: pointer to lpfc hba data structure. * @vpi: host virtual N_Port identifier. * @@ -5622,7 +5622,7 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) } /** - * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring. + * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring * @phba: pointer to lpfc hba data structure. * @pring: pointer to a SLI ring. * @elsiocb: pointer to lpfc els iocb data structure. @@ -5710,7 +5710,7 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr. + * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr * @phba: pointer to lpfc hba data structure. * @vport: pointer to a virtual N_Port data structure. * @@ -5781,7 +5781,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport) } /** - * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport. + * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -5850,7 +5850,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_register_new_vport: Register a new vport with a HBA. + * lpfc_register_new_vport - Register a new vport with a HBA * @phba: pointer to lpfc hba data structure. * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. @@ -5899,7 +5899,7 @@ mbox_err_exit: } /** - * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command. + * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6007,7 +6007,7 @@ out: } /** - * lpfc_issue_els_fdisc: Issue a fdisc iocb command. + * lpfc_issue_els_fdisc - Issue a fdisc iocb command * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -6101,7 +6101,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_npiv_logo: Completion function with vport logo. + * lpfc_cmpl_els_npiv_logo - Completion function with vport logo * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6136,7 +6136,7 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_issue_els_npiv_logo: Issue a logo off a vport. + * lpfc_issue_els_npiv_logo - Issue a logo off a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @@ -6197,7 +6197,7 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) } /** - * lpfc_fabric_block_timeout: Handler function to the fabric block timer. + * lpfc_fabric_block_timeout - Handler function to the fabric block timer * @ptr: holder for the timer function associated data. * * This routine is invoked by the fabric iocb block timer after @@ -6226,7 +6226,7 @@ lpfc_fabric_block_timeout(unsigned long ptr) } /** - * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list. + * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list * @phba: pointer to lpfc hba data structure. * * This routine issues one fabric iocb from the driver internal list to @@ -6285,7 +6285,7 @@ repeat: } /** - * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command. + * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command * @phba: pointer to lpfc hba data structure. * * This routine unblocks the issuing fabric iocb command. The function @@ -6303,7 +6303,7 @@ lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba) } /** - * lpfc_block_fabric_iocbs: Block issuing fabric iocb command. + * lpfc_block_fabric_iocbs - Block issuing fabric iocb command * @phba: pointer to lpfc hba data structure. * * This routine blocks the issuing fabric iocb for a specified amount of @@ -6325,7 +6325,7 @@ lpfc_block_fabric_iocbs(struct lpfc_hba *phba) } /** - * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb. + * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6384,7 +6384,7 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_issue_fabric_iocb: Issue a fabric iocb command. + * lpfc_issue_fabric_iocb - Issue a fabric iocb command * @phba: pointer to lpfc hba data structure. * @iocb: pointer to lpfc command iocb data structure. * @@ -6453,7 +6453,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb) } /** - * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list. + * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list * @vport: pointer to a virtual N_Port data structure. * * This routine aborts all the IOCBs associated with a @vport from the @@ -6493,7 +6493,7 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) } /** - * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list. + * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list * @ndlp: pointer to a node-list data structure. * * This routine aborts all the IOCBs associated with an @ndlp from the @@ -6533,7 +6533,7 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) } /** - * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list. + * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list * @phba: pointer to lpfc hba data structure. * * This routine aborts all the IOCBs currently on the driver internal diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 311ed6d..9373a9e 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -276,7 +276,7 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) } /** - * lpfc_alloc_fast_evt: Allocates data structure for posting event. + * lpfc_alloc_fast_evt - Allocates data structure for posting event * @phba: Pointer to hba context object. * * This function is called from the functions which need to post @@ -303,7 +303,7 @@ lpfc_alloc_fast_evt(struct lpfc_hba *phba) { } /** - * lpfc_free_fast_evt: Frees event data structure. + * lpfc_free_fast_evt - Frees event data structure * @phba: Pointer to hba context object. * @evt: Event object which need to be freed. * @@ -319,7 +319,7 @@ lpfc_free_fast_evt(struct lpfc_hba *phba, } /** - * lpfc_send_fastpath_evt: Posts events generated from fast path. + * lpfc_send_fastpath_evt - Posts events generated from fast path * @phba: Pointer to hba context object. * @evtp: Event data structure. * @@ -1858,7 +1858,7 @@ lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) NLP_STE_UNUSED_NODE); } /** - * lpfc_initialize_node: Initialize all fields of node object. + * lpfc_initialize_node - Initialize all fields of node object * @vport: Pointer to Virtual Port object. * @ndlp: Pointer to FC node object. * @did: FC_ID of the node. diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 06874e6..e3645e8 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -60,7 +60,7 @@ static struct scsi_transport_template *lpfc_vport_transport_template = NULL; static DEFINE_IDR(lpfc_hba_index); /** - * lpfc_config_port_prep: Perform lpfc initialization prior to config port. + * lpfc_config_port_prep - Perform lpfc initialization prior to config port * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization prior to issuing the CONFIG_PORT @@ -221,7 +221,7 @@ out_free_mbox: } /** - * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd. + * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -242,8 +242,7 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) } /** - * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox - * command used for getting wake up parameters. + * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -287,7 +286,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) } /** - * lpfc_config_port_post: Perform lpfc initialization after config port. + * lpfc_config_port_post - Perform lpfc initialization after config port * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization after the CONFIG_PORT mailbox @@ -551,7 +550,7 @@ lpfc_config_port_post(struct lpfc_hba *phba) } /** - * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset. + * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset * @phba: pointer to lpfc HBA data structure. * * This routine will do LPFC uninitialization before the HBA is reset when @@ -583,7 +582,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) } /** - * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset. + * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset * @phba: pointer to lpfc HBA data structure. * * This routine will do uninitialization after the HBA is reset when bring @@ -652,7 +651,7 @@ lpfc_hba_down_post(struct lpfc_hba *phba) } /** - * lpfc_hb_timeout: The HBA-timer timeout handler. + * lpfc_hb_timeout - The HBA-timer timeout handler * @ptr: unsigned long holds the pointer to lpfc hba data structure. * * This is the HBA-timer timeout handler registered to the lpfc driver. When @@ -686,7 +685,7 @@ lpfc_hb_timeout(unsigned long ptr) } /** - * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function. + * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -721,7 +720,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) } /** - * lpfc_hb_timeout_handler: The HBA-timer timeout handler. + * lpfc_hb_timeout_handler - The HBA-timer timeout handler * @phba: pointer to lpfc hba data structure. * * This is the actual HBA-timer timeout handler to be invoked by the worker @@ -830,7 +829,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) } /** - * lpfc_offline_eratt: Bring lpfc offline on hardware error attention. + * lpfc_offline_eratt - Bring lpfc offline on hardware error attention * @phba: pointer to lpfc hba data structure. * * This routine is called to bring the HBA offline when HBA hardware error @@ -857,7 +856,7 @@ lpfc_offline_eratt(struct lpfc_hba *phba) } /** - * lpfc_handle_eratt: The HBA hardware error handler. + * lpfc_handle_eratt - The HBA hardware error handler * @phba: pointer to lpfc hba data structure. * * This routine is invoked to handle the following HBA hardware error @@ -976,7 +975,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) } /** - * lpfc_handle_latt: The HBA link event handler. + * lpfc_handle_latt - The HBA link event handler * @phba: pointer to lpfc hba data structure. * * This routine is invoked from the worker thread to handle a HBA host @@ -1063,7 +1062,7 @@ lpfc_handle_latt_err_exit: } /** - * lpfc_parse_vpd: Parse VPD (Vital Product Data). + * lpfc_parse_vpd - Parse VPD (Vital Product Data) * @phba: pointer to lpfc hba data structure. * @vpd: pointer to the vital product data. * @len: length of the vital product data in bytes. @@ -1213,7 +1212,7 @@ lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len) } /** - * lpfc_get_hba_model_desc: Retrieve HBA device model name and description. + * lpfc_get_hba_model_desc - Retrieve HBA device model name and description * @phba: pointer to lpfc hba data structure. * @mdp: pointer to the data structure to hold the derived model name. * @descp: pointer to the data structure to hold the derived description. @@ -1392,7 +1391,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) } /** - * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring. + * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring * @phba: pointer to lpfc hba data structure. * @pring: pointer to a IOCB ring. * @cnt: the number of IOCBs to be posted to the IOCB ring. @@ -1493,7 +1492,7 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt) } /** - * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring. + * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring * @phba: pointer to lpfc hba data structure. * * This routine posts initial receive IOCB buffers to the ELS ring. The @@ -1518,7 +1517,7 @@ lpfc_post_rcv_buf(struct lpfc_hba *phba) #define S(N,V) (((V)<<(N))|((V)>>(32-(N)))) /** - * lpfc_sha_init: Set up initial array of hash table entries. + * lpfc_sha_init - Set up initial array of hash table entries * @HashResultPointer: pointer to an array as hash table. * * This routine sets up the initial values to the array of hash table entries @@ -1535,7 +1534,7 @@ lpfc_sha_init(uint32_t * HashResultPointer) } /** - * lpfc_sha_iterate: Iterate initial hash table with the working hash table. + * lpfc_sha_iterate - Iterate initial hash table with the working hash table * @HashResultPointer: pointer to an initial/result hash table. * @HashWorkingPointer: pointer to an working hash table. * @@ -1592,7 +1591,7 @@ lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) } /** - * lpfc_challenge_key: Create challenge key based on WWPN of the HBA. + * lpfc_challenge_key - Create challenge key based on WWPN of the HBA * @RandomChallenge: pointer to the entry of host challenge random number array. * @HashWorking: pointer to the entry of the working hash array. * @@ -1608,7 +1607,7 @@ lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking) } /** - * lpfc_hba_init: Perform special handling for LC HBA initialization. + * lpfc_hba_init - Perform special handling for LC HBA initialization * @phba: pointer to lpfc hba data structure. * @hbainit: pointer to an array of unsigned 32-bit integers. * @@ -1637,7 +1636,7 @@ lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) } /** - * lpfc_cleanup: Performs vport cleanups before deleting a vport. + * lpfc_cleanup - Performs vport cleanups before deleting a vport * @vport: pointer to a virtual N_Port data structure. * * This routine performs the necessary cleanups before deleting the @vport. @@ -1724,7 +1723,7 @@ lpfc_cleanup(struct lpfc_vport *vport) } /** - * lpfc_stop_vport_timers: Stop all the timers associated with a vport. + * lpfc_stop_vport_timers - Stop all the timers associated with a vport * @vport: pointer to a virtual N_Port data structure. * * This routine stops all the timers associated with a @vport. This function @@ -1741,7 +1740,7 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport) } /** - * lpfc_stop_phba_timers: Stop all the timers associated with an HBA. + * lpfc_stop_phba_timers - Stop all the timers associated with an HBA * @phba: pointer to lpfc hba data structure. * * This routine stops all the timers associated with a HBA. This function is @@ -1761,7 +1760,7 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba) } /** - * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked. + * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as blocked. Once the HBA's @@ -1781,7 +1780,7 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba) } /** - * lpfc_online: Initialize and bring a HBA online. + * lpfc_online - Initialize and bring a HBA online * @phba: pointer to lpfc hba data structure. * * This routine initializes the HBA and brings a HBA online. During this @@ -1839,7 +1838,7 @@ lpfc_online(struct lpfc_hba *phba) } /** - * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked. + * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as not blocked. Once the @@ -1860,7 +1859,7 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba) } /** - * lpfc_offline_prep: Prepare a HBA to be brought offline. + * lpfc_offline_prep - Prepare a HBA to be brought offline * @phba: pointer to lpfc hba data structure. * * This routine is invoked to prepare a HBA to be brought offline. It performs @@ -1917,7 +1916,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) } /** - * lpfc_offline: Bring a HBA offline. + * lpfc_offline - Bring a HBA offline * @phba: pointer to lpfc hba data structure. * * This routine actually brings a HBA offline. It stops all the timers @@ -1962,7 +1961,7 @@ lpfc_offline(struct lpfc_hba *phba) } /** - * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists. + * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists * @phba: pointer to lpfc hba data structure. * * This routine is to free all the SCSI buffers and IOCBs from the driver @@ -2001,7 +2000,7 @@ lpfc_scsi_free(struct lpfc_hba *phba) } /** - * lpfc_create_port: Create an FC port. + * lpfc_create_port - Create an FC port * @phba: pointer to lpfc hba data structure. * @instance: a unique integer ID to this FC port. * @dev: pointer to the device data structure. @@ -2091,7 +2090,7 @@ out: } /** - * destroy_port: Destroy an FC port. + * destroy_port - destroy an FC port * @vport: pointer to an lpfc virtual N_Port data structure. * * This routine destroys a FC port from the upper layer protocol. All the @@ -2116,7 +2115,7 @@ destroy_port(struct lpfc_vport *vport) } /** - * lpfc_get_instance: Get a unique integer ID. + * lpfc_get_instance - Get a unique integer ID * * This routine allocates a unique integer ID from lpfc_hba_index pool. It * uses the kernel idr facility to perform the task. @@ -2139,7 +2138,7 @@ lpfc_get_instance(void) } /** - * lpfc_scan_finished: method for SCSI layer to detect whether scan is done. + * lpfc_scan_finished - method for SCSI layer to detect whether scan is done * @shost: pointer to SCSI host data structure. * @time: elapsed time of the scan in jiffies. * @@ -2197,7 +2196,7 @@ finished: } /** - * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port. + * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port * @shost: pointer to SCSI host data structure. * * This routine initializes a given SCSI host attributes on a FC port. The @@ -2252,7 +2251,7 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost) } /** - * lpfc_enable_msix: Enable MSI-X interrupt mode. + * lpfc_enable_msix - Enable MSI-X interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable the MSI-X interrupt vectors. The kernel @@ -2366,7 +2365,7 @@ msi_fail_out: } /** - * lpfc_disable_msix: Disable MSI-X interrupt mode. + * lpfc_disable_msix - Disable MSI-X interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to release the MSI-X vectors and then disable the @@ -2385,7 +2384,7 @@ lpfc_disable_msix(struct lpfc_hba *phba) } /** - * lpfc_enable_msi: Enable MSI interrupt mode. + * lpfc_enable_msi - Enable MSI interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable the MSI interrupt mode. The kernel @@ -2423,7 +2422,7 @@ lpfc_enable_msi(struct lpfc_hba *phba) } /** - * lpfc_disable_msi: Disable MSI interrupt mode. + * lpfc_disable_msi - Disable MSI interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to disable the MSI interrupt mode. The driver @@ -2441,7 +2440,7 @@ lpfc_disable_msi(struct lpfc_hba *phba) } /** - * lpfc_log_intr_mode: Log the active interrupt mode + * lpfc_log_intr_mode - Log the active interrupt mode * @phba: pointer to lpfc hba data structure. * @intr_mode: active interrupt mode adopted. * @@ -2490,7 +2489,7 @@ lpfc_stop_port(struct lpfc_hba *phba) } /** - * lpfc_enable_intr: Enable device interrupt. + * lpfc_enable_intr - Enable device interrupt * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable device interrupt and associate driver's @@ -2547,7 +2546,7 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode) } /** - * lpfc_disable_intr: Disable device interrupt. + * lpfc_disable_intr - Disable device interrupt * @phba: pointer to lpfc hba data structure. * * This routine is invoked to disable device interrupt and disassociate the @@ -2574,7 +2573,7 @@ lpfc_disable_intr(struct lpfc_hba *phba) } /** - * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem. + * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem * @pdev: pointer to PCI device * @pid: pointer to PCI device identifier * @@ -3010,7 +3009,7 @@ out: } /** - * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem. + * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem. When an @@ -3095,7 +3094,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev) } /** - * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management. + * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management * @pdev: pointer to PCI device * @msg: power management message * @@ -3139,7 +3138,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg) } /** - * lpfc_pci_resume_one: lpfc PCI func to resume device for power management. + * lpfc_pci_resume_one - lpfc PCI func to resume device for power management * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem to support @@ -3204,7 +3203,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev) } /** - * lpfc_io_error_detected: Driver method for handling PCI I/O error detected. + * lpfc_io_error_detected - Driver method for handling PCI I/O error detected * @pdev: pointer to PCI device. * @state: the current PCI connection state. * @@ -3254,7 +3253,7 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, } /** - * lpfc_io_slot_reset: Restart a PCI device from scratch. + * lpfc_io_slot_reset - Restart a PCI device from scratch * @pdev: pointer to PCI device. * * This routine is registered to the PCI subsystem for error handling. This is @@ -3313,7 +3312,7 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) } /** - * lpfc_io_resume: Resume PCI I/O operation. + * lpfc_io_resume - Resume PCI I/O operation * @pdev: pointer to PCI device * * This routine is registered to the PCI subsystem for error handling. It is @@ -3426,7 +3425,7 @@ static struct pci_driver lpfc_driver = { }; /** - * lpfc_init: lpfc module initialization routine. + * lpfc_init - lpfc module initialization routine * * This routine is to be invoked when the lpfc module is loaded into the * kernel. The special kernel macro module_init() is used to indicate the @@ -3472,7 +3471,7 @@ lpfc_init(void) } /** - * lpfc_exit: lpfc module removal routine. + * lpfc_exit - lpfc module removal routine * * This routine is invoked when the lpfc module is removed from the kernel. * The special kernel macro module_exit() is used to indicate the role of diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 34eeb08..134fc7f 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -39,7 +39,7 @@ #include "lpfc_compat.h" /** - * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory. + * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @offset: offset for dumping VPD memory mailbox command. @@ -77,9 +77,10 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) } /** - * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params. + * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. + * * This function create a dump memory mailbox command to dump wake up * parameters. */ @@ -109,7 +110,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param. + * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -132,7 +133,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_async: Prepare a mailbox command for enabling HBA async event. + * lpfc_config_async - Prepare a mailbox command for enabling HBA async event * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @ring: ring number for the asynchronous event to be configured. @@ -159,7 +160,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, } /** - * lpfc_heart_beat: Prepare a mailbox command for heart beat. + * lpfc_heart_beat - Prepare a mailbox command for heart beat * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -184,7 +185,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_read_la: Prepare a mailbox command for reading HBA link attention. + * lpfc_read_la - Prepare a mailbox command for reading HBA link attention * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @mp: DMA buffer memory for reading the link attention information into. @@ -228,7 +229,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) } /** - * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention. + * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -257,7 +258,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA. + * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -305,7 +306,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_msi: Prepare a mailbox command for configuring msi-x. + * lpfc_config_msi - Prepare a mailbox command for configuring msi-x * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -383,7 +384,7 @@ lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA. + * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @topology: the link topology for the link to be initialized to. @@ -463,7 +464,7 @@ lpfc_init_link(struct lpfc_hba * phba, } /** - * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters. + * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @vpi: virtual N_Port identifier. @@ -523,7 +524,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) } /** - * lpfc_unreg_did: Prepare a mailbox command for unregistering DID. + * lpfc_unreg_did - Prepare a mailbox command for unregistering DID * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -555,7 +556,7 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, } /** - * lpfc_read_config: Prepare a mailbox command for reading HBA configuration. + * lpfc_read_config - Prepare a mailbox command for reading HBA configuration * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -581,7 +582,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats. + * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -606,7 +607,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_reg_login: Prepare a mailbox command for registering remote login. + * lpfc_reg_login - Prepare a mailbox command for registering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -677,7 +678,7 @@ lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, } /** - * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login. + * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @rpi: remote port identifier @@ -709,7 +710,7 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, } /** - * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier. + * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port). @@ -741,7 +742,7 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, } /** - * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id. + * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @pmb: pointer to the driver internal queue element for mailbox command. @@ -771,7 +772,7 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) } /** - * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB) + * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB) * @phba: pointer to lpfc hba data structure. * * This routine sets up and initializes the IOCB rings in the Port Control @@ -835,7 +836,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) } /** - * lpfc_read_rev: Prepare a mailbox command for reading HBA revision. + * lpfc_read_rev - Prepare a mailbox command for reading HBA revision * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -861,7 +862,7 @@ lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2. + * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -880,7 +881,7 @@ lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb, } /** - * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3. + * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -902,7 +903,7 @@ lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb, } /** - * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5. + * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -925,7 +926,7 @@ lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb, } /** - * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ. + * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ * @phba: pointer to lpfc hba data structure. * @id: HBQ identifier. * @hbq_desc: pointer to the HBA descriptor data structure. @@ -999,7 +1000,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, } /** - * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring. + * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring * @phba: pointer to lpfc hba data structure. * @ring: * @pmb: pointer to the driver internal queue element for mailbox command. @@ -1057,7 +1058,7 @@ lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_port: Prepare a mailbox command for configuring port. + * lpfc_config_port - Prepare a mailbox command for configuring port * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -1227,7 +1228,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_kill_board: Prepare a mailbox command for killing board. + * lpfc_kill_board - Prepare a mailbox command for killing board * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -1253,7 +1254,7 @@ lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue. + * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * @@ -1277,7 +1278,7 @@ lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) } /** - * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue. + * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue * @phba: pointer to lpfc hba data structure. * * Driver maintains a internal mailbox command queue implemented as a linked @@ -1304,7 +1305,7 @@ lpfc_mbox_get(struct lpfc_hba * phba) } /** - * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list. + * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * @@ -1327,7 +1328,7 @@ lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) } /** - * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value. + * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value * @phba: pointer to lpfc hba data structure. * @cmd: mailbox command code. * diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index a4bba20..35a9767 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -41,7 +41,7 @@ /** - * lpfc_mem_alloc: create and allocate all PCI and memory pools + * lpfc_mem_alloc - create and allocate all PCI and memory pools * @phba: HBA to allocate pools for * * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool, @@ -136,12 +136,12 @@ lpfc_mem_alloc(struct lpfc_hba * phba) } /** - * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc + * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc * @phba: HBA to free memory for * * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, * lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and - * lpfc_nodelist. Also frees the VPI bitmask. + * lpfc_nodelist. Also frees the VPI bitmask * * Returns: None **/ @@ -212,7 +212,7 @@ lpfc_mem_free(struct lpfc_hba * phba) } /** - * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool + * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool * @phba: HBA which owns the pool to allocate from * @mem_flags: indicates if this is a priority (MEM_PRI) allocation * @handle: used to return the DMA-mapped address of the mbuf @@ -249,7 +249,7 @@ lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle) } /** - * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) + * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) * @phba: HBA which owns the pool to return to * @virt: mbuf to free * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed @@ -278,7 +278,7 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) } /** - * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) + * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) * @phba: HBA which owns the pool to return to * @virt: mbuf to free * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed @@ -291,7 +291,6 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) * Returns: None **/ void - lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) { unsigned long iflags; @@ -303,7 +302,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) } /** - * lpfc_els_hbq_alloc: Allocate an HBQ buffer + * lpfc_els_hbq_alloc - Allocate an HBQ buffer * @phba: HBA to allocate HBQ buffer for * * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI @@ -335,7 +334,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba) } /** - * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc + * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc * @phba: HBA buffer was allocated for * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc * @@ -355,7 +354,7 @@ lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp) } /** - * lpfc_in_buf_free: Free a DMA buffer + * lpfc_in_buf_free - Free a DMA buffer * @phba: HBA buffer is associated with * @mp: Buffer to free * diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 36fd2e7..6eedb23 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -112,7 +112,7 @@ lpfc_debug_save_dif(struct scsi_cmnd *cmnd) } /** - * lpfc_update_stats: Update statistical data for the command completion. + * lpfc_update_stats - Update statistical data for the command completion * @phba: Pointer to HBA object. * @lpfc_cmd: lpfc scsi command object pointer. * @@ -165,8 +165,7 @@ lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) } /** - * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change - * event. + * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event * @phba: Pointer to HBA context object. * @vport: Pointer to vport object. * @ndlp: Pointer to FC node associated with the target. @@ -220,7 +219,7 @@ lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba, } /** - * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread. + * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread * @phba: The Hba for which this call is being executed. * * This routine is called when there is resource error in driver or firmware. @@ -261,7 +260,7 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba) } /** - * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread. + * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread * @phba: The Hba for which this call is being executed. * * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine @@ -303,7 +302,7 @@ lpfc_rampup_queue_depth(struct lpfc_vport *vport, } /** - * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler. + * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler * @phba: The Hba for which this call is being executed. * * This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker @@ -361,7 +360,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) } /** - * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler. + * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler * @phba: The Hba for which this call is being executed. * * This routine is called to process WORKER_RAMP_UP_QUEUE event for worker @@ -410,7 +409,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) } /** - * lpfc_scsi_dev_block: set all scsi hosts to block state. + * lpfc_scsi_dev_block - set all scsi hosts to block state * @phba: Pointer to HBA context object. * * This function walks vport list and set each SCSI host to block state @@ -439,7 +438,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba) } /** - * lpfc_new_scsi_buf: Scsi buffer allocator. + * lpfc_new_scsi_buf - Scsi buffer allocator * @vport: The virtual port for which this call being executed. * * This routine allocates a scsi buffer, which contains all the necessary @@ -563,7 +562,7 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport) } /** - * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba. + * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba * @phba: The Hba for which this call is being executed. * * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list @@ -592,7 +591,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba) } /** - * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list. + * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is being released. * @@ -611,7 +610,7 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) } /** - * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer. + * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be mapped. * @@ -823,9 +822,9 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc) /** * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command * @sc: in: SCSI command - * @apptagmask out: app tag mask - * @apptagval out: app tag value - * @reftag out: ref tag (reference tag) + * @apptagmask: out: app tag mask + * @apptagval: out: app tag value + * @reftag: out: ref tag (reference tag) * * Description: * Extract DIF paramters from the command if possible. Otherwise, @@ -1413,7 +1412,7 @@ out: } /** - * lpfc_send_scsi_error_event: Posts an event when there is SCSI error. + * lpfc_send_scsi_error_event - Posts an event when there is SCSI error * @phba: Pointer to hba context object. * @vport: Pointer to vport object. * @lpfc_cmd: Pointer to lpfc scsi command which reported the error. @@ -1505,7 +1504,7 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport, } /** - * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather. + * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is going to be un-mapped. * @@ -1530,7 +1529,7 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) } /** - * lpfc_handler_fcp_err: FCP response handler. + * lpfc_handler_fcp_err - FCP response handler * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @rsp_iocb: The response IOCB which contains FCP error. @@ -1674,7 +1673,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine. + * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine * @phba: The Hba for which this call is being executed. * @pIocbIn: The command IOCBQ for the scsi cmnd. * @pIocbOut: The response IOCBQ for the scsi cmnd . @@ -1935,7 +1934,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, } /** - * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB. + * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB * @data: A pointer to the immediate command data portion of the IOCB. * @fcp_cmnd: The FCP Command that is provided by the SCSI layer. * @@ -1953,7 +1952,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd) } /** - * lpfc_scsi_prep_cmnd: Routine to convert scsi cmnd to FCP information unit. + * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: The scsi command which needs to send. * @pnode: Pointer to lpfc_nodelist. @@ -2047,7 +2046,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit. + * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @lun: Logical unit number. @@ -2110,7 +2109,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, } /** - * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command. + * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command * @phba: The Hba for which this call is being executed. * @cmdiocbq: Pointer to lpfc_iocbq data structure. * @rspiocbq: Pointer to lpfc_iocbq data structure. @@ -2131,7 +2130,7 @@ lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba, } /** - * lpfc_scsi_tgt_reset: Target reset handler. + * lpfc_scsi_tgt_reset - Target reset handler * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure * @vport: The virtual port for which this call is being executed. * @tgt_id: Target ID. @@ -2198,7 +2197,7 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport, } /** - * lpfc_info: Info entry point of scsi_host_template data structure. + * lpfc_info - Info entry point of scsi_host_template data structure * @host: The scsi host for which this call is being executed. * * This routine provides module information about hba. @@ -2236,7 +2235,7 @@ lpfc_info(struct Scsi_Host *host) } /** - * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba. + * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba * @phba: The Hba for which this call is being executed. * * This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo. @@ -2253,7 +2252,7 @@ static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba) } /** - * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA. + * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA * @phba: The Hba for which this call is being executed. * * This routine starts the fcp_poll_timer of @phba. @@ -2264,7 +2263,7 @@ void lpfc_poll_start_timer(struct lpfc_hba * phba) } /** - * lpfc_poll_timeout: Restart polling timer. + * lpfc_poll_timeout - Restart polling timer * @ptr: Map to lpfc_hba data structure pointer. * * This routine restarts fcp_poll timer, when FCP ring polling is enable @@ -2283,8 +2282,7 @@ void lpfc_poll_timeout(unsigned long ptr) } /** - * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data - * structure. + * lpfc_queuecommand - scsi_host_template queuecommand entry point * @cmnd: Pointer to scsi_cmnd data structure. * @done: Pointer to done routine. * @@ -2450,7 +2448,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) } /** - * lpfc_block_error_handler: Routine to block error handler. + * lpfc_block_error_handler - Routine to block error handler * @cmnd: Pointer to scsi_cmnd data structure. * * This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD. @@ -2472,8 +2470,7 @@ lpfc_block_error_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data - *structure. + * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine aborts @cmnd pending in base driver. @@ -2578,8 +2575,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template - *data structure. + * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine does a device reset by sending a TARGET_RESET task management @@ -2587,7 +2583,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) * * Return code : * 0x2003 - Error - * 0ex2002 - Success + * 0x2002 - Success **/ static int lpfc_device_reset_handler(struct scsi_cmnd *cmnd) @@ -2707,8 +2703,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host - * Template data structure. + * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine does target reset to all target on @cmnd->device->host. @@ -2808,8 +2803,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data - * structure. + * lpfc_slave_alloc - scsi_host_template slave_alloc entry point * @sdev: Pointer to scsi_device. * * This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's @@ -2883,8 +2877,7 @@ lpfc_slave_alloc(struct scsi_device *sdev) } /** - * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data - * structure. + * lpfc_slave_configure - scsi_host_template slave_configure entry point * @sdev: Pointer to scsi_device. * * This routine configures following items @@ -2925,7 +2918,7 @@ lpfc_slave_configure(struct scsi_device *sdev) } /** - * lpfc_slave_destroy: slave_destroy entry point of SHT data structure. + * lpfc_slave_destroy - slave_destroy entry point of SHT data structure * @sdev: Pointer to scsi_device. * * This routine sets @sdev hostatdata filed to null. diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index a36a120..74cfa96 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -68,7 +68,7 @@ typedef enum _lpfc_iocb_type { } lpfc_iocb_type; /** - * lpfc_cmd_iocb: Get next command iocb entry in the ring. + * lpfc_cmd_iocb - Get next command iocb entry in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -85,7 +85,7 @@ lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_resp_iocb: Get next response iocb entry in the ring. + * lpfc_resp_iocb - Get next response iocb entry in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -102,7 +102,7 @@ lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool * @phba: Pointer to HBA context object. * * This function is called with hbalock held. This function @@ -121,7 +121,7 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba) } /** - * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool * @phba: Pointer to HBA context object. * * This function is called with no lock held. This function @@ -142,7 +142,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba) } /** - * __lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * __lpfc_sli_release_iocbq - Release iocb to the iocb pool * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -164,7 +164,7 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** - * lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * lpfc_sli_release_iocbq - Release iocb to the iocb pool * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -185,8 +185,8 @@ lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** - * lpfc_sli_iocb_cmd_type: Get the iocb type. - * @iocb_cmnd : iocb command code. + * lpfc_sli_iocb_cmd_type - Get the iocb type + * @iocb_cmnd: iocb command code. * * This function is called by ring event handler function to get the iocb type. * This function translates the iocb command to an iocb command type used to @@ -295,7 +295,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd) } /** - * lpfc_sli_ring_map: Issue config_ring mbox for all rings. + * lpfc_sli_ring_map - Issue config_ring mbox for all rings * @phba: Pointer to HBA context object. * * This function is called from SLI initialization code @@ -338,7 +338,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba) } /** - * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq. + * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to the driver iocb object. @@ -370,7 +370,7 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_ringtx_get: Get first element of the txq. + * lpfc_sli_ringtx_get - Get first element of the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -391,7 +391,7 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring. + * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -445,7 +445,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_next_iotag: Get an iotag for the iocb. + * lpfc_sli_next_iotag - Get an iotag for the iocb * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -520,7 +520,7 @@ lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** - * lpfc_sli_submit_iocb: Submit an iocb to the firmware. + * lpfc_sli_submit_iocb - Submit an iocb to the firmware * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @iocb: Pointer to iocb slot in the ring. @@ -577,7 +577,7 @@ lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_update_full_ring: Update the chip attention register. + * lpfc_sli_update_full_ring - Update the chip attention register * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -608,7 +608,7 @@ lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_update_ring: Update chip attention register. + * lpfc_sli_update_ring - Update chip attention register * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -632,7 +632,7 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_resume_iocb: Process iocbs in the txq. + * lpfc_sli_resume_iocb - Process iocbs in the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -672,7 +672,7 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ. + * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @@ -717,7 +717,7 @@ lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno) } /** - * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers. + * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers * @phba: Pointer to HBA context object. * * This function is called with no lock held to free all the @@ -771,7 +771,7 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba) } /** - * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware. + * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @hbq_buf: Pointer to HBQ buffer. @@ -841,7 +841,7 @@ struct lpfc_hbq_init *lpfc_hbq_defs[] = { }; /** - * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ. + * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @count: Number of HBQ buffers to be posted. @@ -901,7 +901,7 @@ err: } /** - * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware. + * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware * @phba: Pointer to HBA context object. * @qno: HBQ number. * @@ -917,7 +917,7 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) } /** - * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ. + * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ * @phba: Pointer to HBA context object. * @qno: HBQ queue number. * @@ -933,7 +933,7 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) } /** - * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag. + * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag * @phba: Pointer to HBA context object. * @tag: Tag of the hbq buffer. * @@ -966,7 +966,7 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag) } /** - * lpfc_sli_free_hbq: Give back the hbq buffer to firmware. + * lpfc_sli_free_hbq - Give back the hbq buffer to firmware * @phba: Pointer to HBA context object. * @hbq_buffer: Pointer to HBQ buffer. * @@ -988,7 +988,7 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer) } /** - * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox. + * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox * @mbxCommand: mailbox command code. * * This function is called by the mailbox event handler function to verify @@ -1064,8 +1064,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) } /** - * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from - * lpfc_sli_issue_mbox_wait. + * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler * @phba: Pointer to HBA context object. * @pmboxq: Pointer to mailbox command. * @@ -1096,7 +1095,7 @@ lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) /** - * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler. + * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler * @phba: Pointer to HBA context object. * @pmb: Pointer to mailbox object. * @@ -1140,7 +1139,7 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware. + * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware * @phba: Pointer to HBA context object. * * This function is called with no lock held. This function processes all @@ -1260,7 +1259,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) } /** - * lpfc_sli_get_buff: Get the buffer associated with the buffer tag. + * lpfc_sli_get_buff - Get the buffer associated with the buffer tag * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @tag: buffer tag. @@ -1288,7 +1287,7 @@ lpfc_sli_get_buff(struct lpfc_hba *phba, /** - * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler. + * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @saveq: Pointer to the unsolicited iocb. @@ -1484,7 +1483,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb. + * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @prspiocb: Pointer to response iocb object. @@ -1521,7 +1520,7 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, } /** - * lpfc_sli_process_sol_iocb: process solicited iocb completion. + * lpfc_sli_process_sol_iocb - process solicited iocb completion * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @saveq: Pointer to the response iocb to be processed. @@ -1614,7 +1613,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_rsp_pointers_error: Response ring pointer error handler. + * lpfc_sli_rsp_pointers_error - Response ring pointer error handler * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -1652,7 +1651,7 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_poll_eratt: Error attention polling timer timeout handler. + * lpfc_poll_eratt - Error attention polling timer timeout handler * @ptr: Pointer to address of HBA context object. * * This function is invoked by the Error Attention polling timer when the @@ -1682,7 +1681,7 @@ void lpfc_poll_eratt(unsigned long ptr) } /** - * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode. + * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode * @phba: Pointer to HBA context object. * * This function is called from lpfc_queuecommand, lpfc_poll_timeout, @@ -1845,7 +1844,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) } /** - * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring. + * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mask: Host attention register mask for this ring. @@ -2037,7 +2036,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, } /** - * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings. + * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mask: Host attention register mask for this ring. @@ -2311,7 +2310,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, } /** - * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring. + * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -2360,7 +2359,7 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring. + * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring * @phba: Pointer to HBA context object. * * This function flushes all iocbs in the fcp ring and frees all the iocb @@ -2424,7 +2423,7 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) } /** - * lpfc_sli_brdready: Check for host status bits. + * lpfc_sli_brdready - Check for host status bits * @phba: Pointer to HBA context object. * @mask: Bit mask to be checked. * @@ -2484,7 +2483,7 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask) #define BARRIER_TEST_PATTERN (0xdeadbeef) /** - * lpfc_reset_barrier: Make HBA ready for HBA reset. + * lpfc_reset_barrier - Make HBA ready for HBA reset * @phba: Pointer to HBA context object. * * This function is called before resetting an HBA. This @@ -2564,7 +2563,7 @@ restore_hc: } /** - * lpfc_sli_brdkill: Issue a kill_board mailbox command. + * lpfc_sli_brdkill - Issue a kill_board mailbox command * @phba: Pointer to HBA context object. * * This function issues a kill_board mailbox command and waits for @@ -2651,7 +2650,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba) } /** - * lpfc_sli_brdreset: Reset the HBA. + * lpfc_sli_brdreset - Reset the HBA * @phba: Pointer to HBA context object. * * This function resets the HBA by writing HC_INITFF to the control @@ -2714,7 +2713,7 @@ lpfc_sli_brdreset(struct lpfc_hba *phba) } /** - * lpfc_sli_brdrestart: Restart the HBA. + * lpfc_sli_brdrestart - Restart the HBA * @phba: Pointer to HBA context object. * * This function is called in the SLI initialization code path to @@ -2781,7 +2780,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba) } /** - * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart. + * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart * @phba: Pointer to HBA context object. * * This function is called after a HBA restart to wait for successful @@ -2876,7 +2875,7 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) } /** - * lpfc_sli_hbq_count: Get the number of HBQs to be configured. + * lpfc_sli_hbq_count - Get the number of HBQs to be configured * * This function calculates and returns the number of HBQs required to be * configured. @@ -2888,7 +2887,7 @@ lpfc_sli_hbq_count(void) } /** - * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries. + * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries * * This function adds the number of hbq entries in every HBQ to get * the total number of hbq entries required for the HBA and returns @@ -2907,7 +2906,7 @@ lpfc_sli_hbq_entry_count(void) } /** - * lpfc_sli_hbq_size: Calculate memory required for all hbq entries. + * lpfc_sli_hbq_size - Calculate memory required for all hbq entries * * This function calculates amount of memory required for all hbq entries * to be configured and returns the total memory required. @@ -2919,7 +2918,7 @@ lpfc_sli_hbq_size(void) } /** - * lpfc_sli_hbq_setup: configure and initialize HBQs. + * lpfc_sli_hbq_setup - configure and initialize HBQs * @phba: Pointer to HBA context object. * * This function is called during the SLI initialization to configure @@ -2988,7 +2987,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_config_port: Issue config port mailbox command. + * lpfc_sli_config_port - Issue config port mailbox command * @phba: Pointer to HBA context object. * @sli_mode: sli mode - 2/3 * @@ -3114,7 +3113,7 @@ do_prep_failed: /** - * lpfc_sli_hba_setup: SLI intialization function. + * lpfc_sli_hba_setup - SLI intialization function * @phba: Pointer to HBA context object. * * This function is the main SLI intialization function. This function @@ -3206,7 +3205,7 @@ lpfc_sli_hba_setup_error: /** - * lpfc_mbox_timeout: Timeout call back function for mbox timer. + * lpfc_mbox_timeout - Timeout call back function for mbox timer * @ptr: context object - pointer to hba structure. * * This is the callback function for mailbox timer. The mailbox @@ -3237,7 +3236,7 @@ lpfc_mbox_timeout(unsigned long ptr) /** - * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout. + * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout * @phba: Pointer to HBA context object. * * This function is called from worker thread when a mailbox command times out. @@ -3295,7 +3294,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) } /** - * lpfc_sli_issue_mbox: Issue a mailbox command to firmware. + * lpfc_sli_issue_mbox - Issue a mailbox command to firmware * @phba: Pointer to HBA context object. * @pmbox: Pointer to mailbox object. * @flag: Flag indicating how the mailbox need to be processed. @@ -3632,7 +3631,7 @@ out_not_finished: } /** - * __lpfc_sli_ringtx_put: Add an iocb to the txq. + * __lpfc_sli_ringtx_put - Add an iocb to the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to address of newly added command iocb. @@ -3651,7 +3650,7 @@ __lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_next_iocb: Get the next iocb in the txq. + * lpfc_sli_next_iocb - Get the next iocb in the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to address of newly added command iocb. @@ -3683,7 +3682,7 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb. + * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to command iocb. @@ -3813,7 +3812,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, /** - * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb. + * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to command iocb. @@ -3840,7 +3839,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_extra_ring_setup: Extra ring setup function. + * lpfc_extra_ring_setup - Extra ring setup function * @phba: Pointer to HBA context object. * * This function is called while driver attaches with the @@ -3886,7 +3885,7 @@ lpfc_extra_ring_setup( struct lpfc_hba *phba) } /** - * lpfc_sli_async_event_handler: ASYNC iocb handler function. + * lpfc_sli_async_event_handler - ASYNC iocb handler function * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @iocbq: Pointer to iocb object. @@ -3954,7 +3953,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, /** - * lpfc_sli_setup: SLI ring setup function. + * lpfc_sli_setup - SLI ring setup function * @phba: Pointer to HBA context object. * * lpfc_sli_setup sets up rings of the SLI interface with @@ -4076,7 +4075,7 @@ lpfc_sli_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_queue_setup: Queue initialization function. + * lpfc_sli_queue_setup - Queue initialization function * @phba: Pointer to HBA context object. * * lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each @@ -4115,7 +4114,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_host_down: Vport cleanup function. + * lpfc_sli_host_down - Vport cleanup function * @vport: Pointer to virtual port object. * * lpfc_sli_host_down is called to clean up the resources @@ -4194,7 +4193,7 @@ lpfc_sli_host_down(struct lpfc_vport *vport) } /** - * lpfc_sli_hba_down: Resource cleanup function for the HBA. + * lpfc_sli_hba_down - Resource cleanup function for the HBA * @phba: Pointer to HBA context object. * * This function cleans up all iocb, buffers, mailbox commands @@ -4299,7 +4298,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } /** - * lpfc_sli_pcimem_bcopy: SLI memory copy function. + * lpfc_sli_pcimem_bcopy - SLI memory copy function * @srcp: Source memory pointer. * @destp: Destination memory pointer. * @cnt: Number of words required to be copied. @@ -4329,7 +4328,7 @@ lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt) /** - * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq. + * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mp: Pointer to driver buffer object. @@ -4352,8 +4351,7 @@ lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted - * using CMD_QUE_XRI64_CX iocb. + * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer * @phba: Pointer to HBA context object. * * When HBQ is enabled, buffers are searched based on tags. This function @@ -4378,8 +4376,7 @@ lpfc_sli_get_buffer_tag(struct lpfc_hba *phba) } /** - * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with - * posted using CMD_QUE_XRI64_CX iocb. + * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @tag: Buffer tag. @@ -4422,8 +4419,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for - * unsolicited ct and els events. + * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @phys: DMA address of the buffer. @@ -4466,7 +4462,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs. + * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs * @phba: Pointer to HBA context object. * @cmdiocb: Pointer to driver command iocb object. * @rspiocb: Pointer to driver response iocb object. @@ -4542,7 +4538,7 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command. + * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command * @phba: Pointer to HBA context object. * @cmdiocb: Pointer to driver command iocb object. * @rspiocb: Pointer to driver response iocb object. @@ -4572,7 +4568,7 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_sli_issue_abort_iotag: Abort function for a command iocb. + * lpfc_sli_issue_abort_iotag - Abort function for a command iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @cmdiocb: Pointer to driver command iocb object. @@ -4658,15 +4654,14 @@ abort_iotag_exit: } /** - * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands - * associated with a vport/SCSI target/lun. + * lpfc_sli_validate_fcp_iocb - find commands associated with a vport or LUN * @iocbq: Pointer to driver iocb object. * @vport: Pointer to driver virtual port object. * @tgt_id: SCSI ID of the target. * @lun_id: LUN ID of the scsi device. * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST * - * This function acts as iocb filter for functions which abort or count + * This function acts as an iocb filter for functions which abort or count * all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return * 0 if the filtering criteria is met for the given iocb and will return * 1 if the filtering criteria is not met. @@ -4724,7 +4719,7 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport, } /** - * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending. + * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending * @vport: Pointer to virtual port. * @tgt_id: SCSI ID of the target. * @lun_id: LUN ID of the scsi device. @@ -4762,8 +4757,7 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id, } /** - * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted - * FCP iocb. + * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs * @phba: Pointer to HBA context object * @cmdiocb: Pointer to command iocb object. * @rspiocb: Pointer to response iocb object. @@ -4781,8 +4775,7 @@ lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands - * pending on a SCSI host(vport)/target/lun. + * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN * @vport: Pointer to virtual port. * @pring: Pointer to driver SLI ring object. * @tgt_id: SCSI ID of the target. @@ -4854,8 +4847,7 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using - * lpfc_sli_issue_iocb_wait. + * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler * @phba: Pointer to HBA context object. * @cmdiocbq: Pointer to command iocb. * @rspiocbq: Pointer to response iocb. @@ -4893,7 +4885,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba, } /** - * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands. + * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands * @phba: Pointer to HBA context object.. * @pring: Pointer to sli ring. * @piocb: Pointer to command iocb. @@ -5000,7 +4992,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba, } /** - * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox. + * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox * @phba: Pointer to HBA context object. * @pmboxq: Pointer to driver mailbox object. * @timeout: Timeout in number of seconds. @@ -5070,7 +5062,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, } /** - * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function. + * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function * @phba: Pointer to HBA context. * * This function is called to cleanup any pending mailbox @@ -5113,7 +5105,7 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) } /** - * lpfc_sli_check_eratt: check error attention events + * lpfc_sli_check_eratt - check error attention events * @phba: Pointer to HBA context. * * This function is called form timer soft interrupt context to check HBA's @@ -5162,7 +5154,7 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba) } /** - * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver. + * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5423,7 +5415,7 @@ send_current_mbox: } /* lpfc_sp_intr_handler */ /** - * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver. + * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5510,7 +5502,7 @@ lpfc_fp_intr_handler(int irq, void *dev_id) } /* lpfc_fp_intr_handler */ /** - * lpfc_intr_handler: The device-level interrupt handler of lpfc driver. + * lpfc_intr_handler - The device-level interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 63b54c6..917ad56 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -206,7 +206,7 @@ lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) } /** - * lpfc_discovery_wait: Wait for driver discovery to quiesce. + * lpfc_discovery_wait - Wait for driver discovery to quiesce * @vport: The virtual port for which this call is being executed. * * This driver calls this routine specifically from lpfc_vport_delete @@ -741,7 +741,7 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) /** - * lpfc_vport_reset_stat_data: Reset the statistical data for the vport. + * lpfc_vport_reset_stat_data - Reset the statistical data for the vport * @vport: Pointer to vport object. * * This function resets the statistical data for the vport. This function @@ -763,8 +763,7 @@ lpfc_vport_reset_stat_data(struct lpfc_vport *vport) /** - * lpfc_alloc_bucket: Allocate data buffer required for collecting - * statistical data. + * lpfc_alloc_bucket - Allocate data buffer required for statistical data * @vport: Pointer to vport object. * * This function allocates data buffer required for all the FC @@ -797,8 +796,7 @@ lpfc_alloc_bucket(struct lpfc_vport *vport) } /** - * lpfc_free_bucket: Free data buffer required for collecting - * statistical data. + * lpfc_free_bucket - Free data buffer required for statistical data * @vport: Pointer to vport object. * * Th function frees statistical data buffer of all the FC -- cgit v0.10.2 From a257bf905efd22fd2c055580b0ab2e8e7ed1b6a1 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 6 Apr 2009 18:48:10 -0400 Subject: [SCSI] lpfc 8.3.1: misc fixes/changes 8.3.1 Fixes/Changes : - Fix incorrect byte-swapping on word 4 of IOCB (data length) which caused LUNs to not be discovered on big-endian (e.g. PPC) - Remove a bad cast of MBslimaddr which loses the __iomem (sparse) - Make lpfc_debugfs_mask_disc_trc static (sparse) - Correct misspelled word BlockGuard in lpfc_logmsg.h comment - Replaced repeated code segment for canceling IOCBs from a list with a function call, lpfc_sli_cancel_iocbs(). - Increased HBQ buffers to support 40KB SSC sequences. - Added sysfs interface to update speed and topology parameter without link bounce. - Fixed bug with sysfs fc_host WWNs not being updated after changing the WWNs. - Check if the active mailbox is NULL in the beginning of the mailbox timeout handler - fixes panic in the mailbox timeout handler while running IO stress test - Fixed system panic in lpfc_pci_remove_one() due to ndlp indirect reference to phba through vport - Removed de-reference of scsi device after call to scsi_done() to fix panic in scsi completion path while accessing scsi device after scsi_done is called. - Fixed "Nodelist not empty" message when unloading the driver after target reboot test - Added LP2105 HBA model description - Added code to print all 16 words of unrecognized ASYNC events - Fixed memory leak in vport create + delete loop - Added support for handling dual error bit from HBA - Fixed a driver NULL pointer dereference in lpfc_sli_process_sol_iocb - Fixed a discovery bug with FC switch reboot in lpfc_setup_disc_node - Take NULL termintator into account when calculating available buffer space Signed-off-by: James Smart Signed-off-by: James Bottomley diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index dcba267..1105f9a 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -443,6 +443,7 @@ struct lpfc_hba { uint32_t hba_flag; /* hba generic flags */ #define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */ +#define DEFER_ERATT 0x4 /* Deferred error attention in progress */ struct lpfc_dmabuf slim2p; MAILBOX_t *mbox; @@ -723,4 +724,3 @@ lpfc_sli_read_hs(struct lpfc_hba *phba) return; } - diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 69296cd..c14f0cb 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -2216,18 +2216,41 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ -static int -lpfc_topology_set(struct lpfc_hba *phba, int val) +static ssize_t +lpfc_topology_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0; + int nolip = 0; + const char *val_buf = buf; int err; uint32_t prev_val; + + if (!strncmp(buf, "nolip ", strlen("nolip "))) { + nolip = 1; + val_buf = &buf[strlen("nolip ")]; + } + + if (!isdigit(val_buf[0])) + return -EINVAL; + if (sscanf(val_buf, "%i", &val) != 1) + return -EINVAL; + if (val >= 0 && val <= 6) { prev_val = phba->cfg_topology; phba->cfg_topology = val; + if (nolip) + return strlen(buf); + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); - if (err) + if (err) { phba->cfg_topology = prev_val; - return err; + return -EINVAL; + } else + return strlen(buf); } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "%d:0467 lpfc_topology attribute cannot be set to %d, " @@ -2240,7 +2263,6 @@ module_param(lpfc_topology, int, 0); MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology"); lpfc_param_show(topology) lpfc_param_init(topology, 0, 0, 6) -lpfc_param_store(topology) static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, lpfc_topology_show, lpfc_topology_store); @@ -2281,7 +2303,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr, unsigned long base, step, bucket_type; if (!strncmp(buf, "setbucket", strlen("setbucket"))) { - if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN) + if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1)) return -EINVAL; strcpy(bucket_data, buf); @@ -2598,12 +2620,29 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = { * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ -static int -lpfc_link_speed_set(struct lpfc_hba *phba, int val) +static ssize_t +lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0; + int nolip = 0; + const char *val_buf = buf; int err; uint32_t prev_val; + if (!strncmp(buf, "nolip ", strlen("nolip "))) { + nolip = 1; + val_buf = &buf[strlen("nolip ")]; + } + + if (!isdigit(val_buf[0])) + return -EINVAL; + if (sscanf(val_buf, "%i", &val) != 1) + return -EINVAL; + if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) || ((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) || ((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) || @@ -2611,14 +2650,19 @@ lpfc_link_speed_set(struct lpfc_hba *phba, int val) ((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb))) return -EINVAL; - if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED) + if ((val >= 0 && val <= 8) && (LPFC_LINK_SPEED_BITMAP & (1 << val))) { prev_val = phba->cfg_link_speed; phba->cfg_link_speed = val; + if (nolip) + return strlen(buf); + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); - if (err) + if (err) { phba->cfg_link_speed = prev_val; - return err; + return -EINVAL; + } else + return strlen(buf); } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -2665,7 +2709,6 @@ lpfc_link_speed_init(struct lpfc_hba *phba, int val) return -EINVAL; } -lpfc_param_store(link_speed) static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, lpfc_link_speed_show, lpfc_link_speed_store); diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 07f4976..f88ce3f 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -184,6 +184,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *); struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *); void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *); uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *); +void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t, + uint32_t); void lpfc_reset_barrier(struct lpfc_hba * phba); int lpfc_sli_brdready(struct lpfc_hba *, uint32_t); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index abb870e..52be564 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -95,7 +95,7 @@ module_param(lpfc_debugfs_max_slow_ring_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc, "Set debugfs slow ring trace depth"); -int lpfc_debugfs_mask_disc_trc; +static int lpfc_debugfs_mask_disc_trc; module_param(lpfc_debugfs_mask_disc_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, "Set debugfs discovery trace mask"); @@ -399,8 +399,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) len += snprintf(buf+len, size-len, "HBA SLIM\n"); lpfc_memcpy_from_slim(buffer, - ((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off, - 1024); + phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024); ptr = (uint32_t *)&buffer[0]; off = lpfc_debugfs_last_hba_slim_off; diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index f29e548..ffd1089 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -99,6 +99,7 @@ struct lpfc_nodelist { #define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */ struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ + struct lpfc_hba *phba; struct fc_rport *rport; /* Corresponding FC transport port structure */ struct lpfc_vport *vport; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index d32c98b..b8b34cf 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -5058,19 +5058,9 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &piocb->iocb; - list_del_init(&piocb->list); - - if (!piocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, piocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } - } + /* Cancell all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); return; } @@ -5121,18 +5111,11 @@ lpfc_els_flush_all_cmd(struct lpfc_hba *phba) lpfc_sli_issue_abort_iotag(phba, pring, piocb); } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &piocb->iocb; - list_del_init(&piocb->list); - if (!piocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, piocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } - } + + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + return; } @@ -6468,7 +6451,6 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) LIST_HEAD(completions); struct lpfc_hba *phba = vport->phba; struct lpfc_iocbq *tmp_iocb, *piocb; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list, @@ -6481,15 +6463,9 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** @@ -6506,10 +6482,9 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) { LIST_HEAD(completions); - struct lpfc_hba *phba = ndlp->vport->phba; + struct lpfc_hba *phba = ndlp->phba; struct lpfc_iocbq *tmp_iocb, *piocb; struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING]; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list, @@ -6521,15 +6496,9 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** @@ -6546,20 +6515,12 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) void lpfc_fabric_abort_hba(struct lpfc_hba *phba) { LIST_HEAD(completions); - struct lpfc_iocbq *piocb; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_splice_init(&phba->fabric_iocb_list, &completions); spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 9373a9e..e764ce0 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -78,7 +78,7 @@ lpfc_terminate_rport_io(struct fc_rport *rport) return; } - phba = ndlp->vport->phba; + phba = ndlp->phba; lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT, "rport terminate: sid:x%x did:x%x flg:x%x", @@ -1862,9 +1862,14 @@ lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) * @vport: Pointer to Virtual Port object. * @ndlp: Pointer to FC node object. * @did: FC_ID of the node. - * This function is always called when node object need to - * be initialized. It initializes all the fields of the node - * object. + * + * This function is always called when node object need to be initialized. + * It initializes all the fields of the node object. Although the reference + * to phba from @ndlp can be obtained indirectly through it's reference to + * @vport, a direct reference to phba is taken here by @ndlp. This is due + * to the life-span of the @ndlp might go beyond the existence of @vport as + * the final release of ndlp is determined by its reference count. And, the + * operation on @ndlp needs the reference to phba. **/ static inline void lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, @@ -1877,6 +1882,7 @@ lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_delayfunc.data = (unsigned long)ndlp; ndlp->nlp_DID = did; ndlp->vport = vport; + ndlp->phba = vport->phba; ndlp->nlp_sid = NLP_NO_SID; kref_init(&ndlp->kref); NLP_INT_NODE_ACT(ndlp); @@ -2086,7 +2092,6 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) struct lpfc_sli *psli; struct lpfc_sli_ring *pring; struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *icmd; uint32_t rpi, i; lpfc_fabric_abort_nport(ndlp); @@ -2122,19 +2127,9 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } } - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - icmd = &iocb->iocb; - icmd->ulpStatus = IOSTAT_LOCAL_REJECT; - icmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl)(phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); return 0; } @@ -2186,9 +2181,13 @@ lpfc_unreg_all_rpis(struct lpfc_vport *vport) mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); - if (rc == MBX_NOT_FINISHED) { + if (rc != MBX_TIMEOUT) mempool_free(mbox, phba->mbox_mem_pool); - } + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) + lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, + "1836 Could not issue " + "unreg_login(all_rpis) status %d\n", rc); } } @@ -2206,12 +2205,14 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport) mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); - if (rc == MBX_NOT_FINISHED) { + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, "1815 Could not issue " - "unreg_did (default rpis)\n"); - mempool_free(mbox, phba->mbox_mem_pool); - } + "unreg_did (default rpis) status %d\n", + rc); } } @@ -2470,14 +2471,13 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) if (ndlp->nlp_flag & NLP_RCV_PLOGI) return NULL; - spin_lock_irq(shost->host_lock); - ndlp->nlp_flag |= NLP_NPR_2B_DISC; - spin_unlock_irq(shost->host_lock); - /* Since this node is marked for discovery, * delay timeout is not needed. */ lpfc_cancel_retry_delay_tmo(vport, ndlp); + spin_lock_irq(shost->host_lock); + ndlp->nlp_flag |= NLP_NPR_2B_DISC; + spin_unlock_irq(shost->host_lock); } else ndlp = NULL; } else { @@ -2740,19 +2740,9 @@ lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - icmd = &iocb->iocb; - icmd->ulpStatus = IOSTAT_LOCAL_REJECT; - icmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } static void @@ -3173,7 +3163,7 @@ lpfc_nlp_release(struct kref *kref) lpfc_nlp_remove(ndlp->vport, ndlp); /* clear the ndlp active flag for all release cases */ - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); NLP_CLR_NODE_ACT(ndlp); spin_unlock_irqrestore(&phba->ndlp_lock, flags); @@ -3181,7 +3171,7 @@ lpfc_nlp_release(struct kref *kref) /* free ndlp memory for final ndlp release */ if (NLP_CHK_FREE_REQ(ndlp)) { kfree(ndlp->lat_data); - mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool); + mempool_free(ndlp, ndlp->phba->nlp_mem_pool); } } @@ -3204,7 +3194,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp) * ndlp reference count that is in the process of being * released. */ - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) { spin_unlock_irqrestore(&phba->ndlp_lock, flags); @@ -3240,7 +3230,7 @@ lpfc_nlp_put(struct lpfc_nodelist *ndlp) "node put: did:x%x flg:x%x refcnt:x%x", ndlp->nlp_DID, ndlp->nlp_flag, atomic_read(&ndlp->kref.refcount)); - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); /* Check the ndlp memory free acknowledge flag to avoid the * possible race condition that kref_put got invoked again diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e3645e8..86d1bdc 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -302,6 +302,7 @@ int lpfc_config_port_post(struct lpfc_hba *phba) { struct lpfc_vport *vport = phba->pport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); LPFC_MBOXQ_t *pmb; MAILBOX_t *mb; struct lpfc_dmabuf *mp; @@ -359,6 +360,11 @@ lpfc_config_port_post(struct lpfc_hba *phba) sizeof (struct lpfc_name)); memcpy(&vport->fc_portname, &vport->fc_sparam.portName, sizeof (struct lpfc_name)); + + /* Update the fc_host data structures with new wwn. */ + fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn); + fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn); + /* If no serial number in VPD data, use low 6 bytes of WWNN */ /* This should be consolidated into parse_vpd ? - mr */ if (phba->SerialNumber[0] == 0) { @@ -598,8 +604,6 @@ lpfc_hba_down_post(struct lpfc_hba *phba) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; struct lpfc_dmabuf *mp, *next_mp; - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; LIST_HEAD(completions); int i; @@ -627,20 +631,9 @@ lpfc_hba_down_post(struct lpfc_hba *phba) pring->txcmplq_cnt = 0; spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, - list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); lpfc_sli_abort_iocb_ring(phba, pring); spin_lock_irq(&phba->hbalock); @@ -856,6 +849,72 @@ lpfc_offline_eratt(struct lpfc_hba *phba) } /** + * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to handle the deferred HBA hardware error + * conditions. This type of error is indicated by HBA by setting ER1 + * and another ER bit in the host status register. The driver will + * wait until the ER1 bit clears before handling the error condition. + **/ +static void +lpfc_handle_deferred_eratt(struct lpfc_hba *phba) +{ + uint32_t old_host_status = phba->work_hs; + struct lpfc_sli_ring *pring; + struct lpfc_sli *psli = &phba->sli; + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0479 Deferred Adapter Hardware Error " + "Data: x%x x%x x%x\n", + phba->work_hs, + phba->work_status[0], phba->work_status[1]); + + spin_lock_irq(&phba->hbalock); + psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + spin_unlock_irq(&phba->hbalock); + + + /* + * Firmware stops when it triggred erratt. That could cause the I/Os + * dropped by the firmware. Error iocb (I/O) on txcmplq and let the + * SCSI layer retry it after re-establishing link. + */ + pring = &psli->ring[psli->fcp_ring]; + lpfc_sli_abort_iocb_ring(phba, pring); + + /* + * There was a firmware error. Take the hba offline and then + * attempt to restart it. + */ + lpfc_offline_prep(phba); + lpfc_offline(phba); + + /* Wait for the ER1 bit to clear.*/ + while (phba->work_hs & HS_FFER1) { + msleep(100); + phba->work_hs = readl(phba->HSregaddr); + /* If driver is unloading let the worker thread continue */ + if (phba->pport->load_flag & FC_UNLOADING) { + phba->work_hs = 0; + break; + } + } + + /* + * This is to ptrotect against a race condition in which + * first write to the host attention register clear the + * host status register. + */ + if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING))) + phba->work_hs = old_host_status & ~HS_FFER1; + + phba->hba_flag &= ~DEFER_ERATT; + phba->work_status[0] = readl(phba->MBslimaddr + 0xa8); + phba->work_status[1] = readl(phba->MBslimaddr + 0xac); +} + +/** * lpfc_handle_eratt - The HBA hardware error handler * @phba: pointer to lpfc hba data structure. * @@ -894,6 +953,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba) (char *) &board_event, LPFC_NL_VENDOR_ID); + if (phba->hba_flag & DEFER_ERATT) + lpfc_handle_deferred_eratt(phba); + if (phba->work_hs & HS_FFER6) { /* Re-establishing Link */ lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, @@ -1321,7 +1383,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) m = (typeof(m)){"LPe11000", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_ZEPHYR_DCSP: - m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"}; + m = (typeof(m)){"LP2105", max_speed, "PCIe"}; + GE = 1; break; case PCI_DEVICE_ID_ZMID: m = (typeof(m)){"LPe1150", max_speed, "PCIe"}; @@ -3032,8 +3095,6 @@ lpfc_pci_remove_one(struct pci_dev *pdev) lpfc_free_sysfs_attr(vport); - kthread_stop(phba->worker_thread); - /* Release all the vports against this physical port */ vports = lpfc_create_vport_work_array(phba); if (vports != NULL) @@ -3051,7 +3112,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev) * clears the rings, discards all mailbox commands, and resets * the HBA. */ + + /* HBA interrupt will be diabled after this call */ lpfc_sli_hba_down(phba); + /* Stop kthread signal shall trigger work_done one more time */ + kthread_stop(phba->worker_thread); + /* Final cleanup of txcmplq and reset the HBA */ lpfc_sli_brdrestart(phba); lpfc_stop_phba_timers(phba); diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h index a85b7c1..1aa8570 100644 --- a/drivers/scsi/lpfc/lpfc_logmsg.h +++ b/drivers/scsi/lpfc/lpfc_logmsg.h @@ -27,7 +27,7 @@ #define LOG_FCP 0x40 /* FCP traffic history */ #define LOG_NODE 0x80 /* Node table events */ #define LOG_TEMP 0x100 /* Temperature sensor events */ -#define LOG_BG 0x200 /* BlockBuard events */ +#define LOG_BG 0x200 /* BlockGuard events */ #define LOG_MISC 0x400 /* Miscellaneous events */ #define LOG_SLI 0x800 /* SLI events */ #define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */ diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 8f548ad..08cdc77 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -192,7 +192,6 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING]; struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *cmd; /* Abort outstanding I/O on NPort */ lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY, @@ -223,19 +222,10 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + lpfc_cancel_retry_delay_tmo(phba->pport, ndlp); return 0; } diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 6eedb23..167b66d 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -272,14 +272,14 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba) **/ static inline void lpfc_rampup_queue_depth(struct lpfc_vport *vport, - struct scsi_device *sdev) + uint32_t queue_depth) { unsigned long flags; struct lpfc_hba *phba = vport->phba; uint32_t evt_posted; atomic_inc(&phba->num_cmd_success); - if (vport->cfg_lun_queue_depth <= sdev->queue_depth) + if (vport->cfg_lun_queue_depth <= queue_depth) return; spin_lock_irqsave(&phba->hbalock, flags); if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) || @@ -737,7 +737,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * Due to difference in data length between DIF/non-DIF paths, * we need to set word 4 of IOCB here */ - iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd)); + iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd); return 0; } @@ -1693,10 +1693,12 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, struct lpfc_nodelist *pnode = rdata->pnode; struct scsi_cmnd *cmd = lpfc_cmd->pCmd; int result; - struct scsi_device *sdev, *tmp_sdev; + struct scsi_device *tmp_sdev; int depth = 0; unsigned long flags; struct lpfc_fast_path_event *fast_path_evt; + struct Scsi_Host *shost = cmd->device->host; + uint32_t queue_depth, scsi_id; lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; @@ -1807,11 +1809,10 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_update_stats(phba, lpfc_cmd); result = cmd->result; - sdev = cmd->device; if (vport->cfg_max_scsicmpl_time && time_after(jiffies, lpfc_cmd->start_time + msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) { - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); if (pnode && NLP_CHK_NODE_ACT(pnode)) { if (pnode->cmd_qdepth > atomic_read(&pnode->cmd_pending) && @@ -1824,22 +1825,26 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, pnode->last_change_time = jiffies; } - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); } else if (pnode && NLP_CHK_NODE_ACT(pnode)) { if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) && time_after(jiffies, pnode->last_change_time + msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) { - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); pnode->cmd_qdepth += pnode->cmd_qdepth * LPFC_TGTQ_RAMPUP_PCENT / 100; if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH) pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; pnode->last_change_time = jiffies; - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); } } lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); + + /* The sdev is not guaranteed to be valid post scsi_done upcall. */ + queue_depth = cmd->device->queue_depth; + scsi_id = cmd->device->id; cmd->scsi_done(cmd); if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { @@ -1847,28 +1852,28 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, * If there is a thread waiting for command completion * wake up the thread. */ - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); lpfc_release_scsi_buf(phba, lpfc_cmd); return; } if (!result) - lpfc_rampup_queue_depth(vport, sdev); + lpfc_rampup_queue_depth(vport, queue_depth); if (!result && pnode && NLP_CHK_NODE_ACT(pnode) && ((jiffies - pnode->last_ramp_up_time) > LPFC_Q_RAMP_UP_INTERVAL * HZ) && ((jiffies - pnode->last_q_full_time) > LPFC_Q_RAMP_UP_INTERVAL * HZ) && - (vport->cfg_lun_queue_depth > sdev->queue_depth)) { - shost_for_each_device(tmp_sdev, sdev->host) { + (vport->cfg_lun_queue_depth > queue_depth)) { + shost_for_each_device(tmp_sdev, shost) { if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){ - if (tmp_sdev->id != sdev->id) + if (tmp_sdev->id != scsi_id) continue; if (tmp_sdev->ordered_tags) scsi_adjust_queue_depth(tmp_sdev, @@ -1884,7 +1889,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, } lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode, 0xFFFFFFFF, - sdev->queue_depth - 1, sdev->queue_depth); + queue_depth , queue_depth + 1); } /* @@ -1895,8 +1900,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, NLP_CHK_NODE_ACT(pnode)) { pnode->last_q_full_time = jiffies; - shost_for_each_device(tmp_sdev, sdev->host) { - if (tmp_sdev->id != sdev->id) + shost_for_each_device(tmp_sdev, shost) { + if (tmp_sdev->id != scsi_id) continue; depth = scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1); @@ -1908,7 +1913,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, * scsi_track_queue_full. */ if (depth == -1) - depth = sdev->host->cmd_per_lun; + depth = shost->cmd_per_lun; if (depth) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, @@ -1924,11 +1929,11 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, * If there is a thread waiting for command completion * wake up the thread. */ - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); lpfc_release_scsi_buf(phba, lpfc_cmd); } diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 74cfa96..eb5c75c 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -185,6 +185,38 @@ lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** + * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list. + * @phba: Pointer to HBA context object. + * @iocblist: List of IOCBs. + * @ulpstatus: ULP status in IOCB command field. + * @ulpWord4: ULP word-4 in IOCB command field. + * + * This function is called with a list of IOCBs to cancel. It cancels the IOCB + * on the list by invoking the complete callback function associated with the + * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond + * fields. + **/ +void +lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist, + uint32_t ulpstatus, uint32_t ulpWord4) +{ + struct lpfc_iocbq *piocb; + + while (!list_empty(iocblist)) { + list_remove_head(iocblist, piocb, struct lpfc_iocbq, list); + + if (!piocb->iocb_cmpl) + lpfc_sli_release_iocbq(phba, piocb); + else { + piocb->iocb.ulpStatus = ulpstatus; + piocb->iocb.un.ulpWord[4] = ulpWord4; + (piocb->iocb_cmpl) (phba, piocb, piocb); + } + } + return; +} + +/** * lpfc_sli_iocb_cmd_type - Get the iocb type * @iocb_cmnd: iocb command code. * @@ -818,8 +850,8 @@ static struct lpfc_hbq_init lpfc_els_hbq = { .profile = 0, .ring_mask = (1 << LPFC_ELS_RING), .buffer_count = 0, - .init_count = 20, - .add_count = 5, + .init_count = 40, + .add_count = 40, }; /* HBQ for the extra ring if needed */ @@ -1596,7 +1628,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, * Ring handler: unexpected completion IoTag * */ - lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI, + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, "0322 Ring %d handler: " "unexpected completion IoTag x%x " "Data: x%x x%x x%x x%x\n", @@ -2324,7 +2356,6 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { LIST_HEAD(completions); struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *cmd = NULL; if (pring->ringno == LPFC_ELS_RING) { lpfc_fabric_abort_hba(phba); @@ -2343,19 +2374,9 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** @@ -2373,8 +2394,6 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) { LIST_HEAD(txq); LIST_HEAD(txcmplq); - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; @@ -2392,34 +2411,12 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); /* Flush the txq */ - while (!list_empty(&txq)) { - iocb = list_get_first(&txq, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); /* Flush the txcmpq */ - while (!list_empty(&txcmplq)) { - iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); } /** @@ -3251,6 +3248,21 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; + /* Check the pmbox pointer first. There is a race condition + * between the mbox timeout handler getting executed in the + * worklist and the mailbox actually completing. When this + * race condition occurs, the mbox_active will be NULL. + */ + spin_lock_irq(&phba->hbalock); + if (pmbox == NULL) { + lpfc_printf_log(phba, KERN_WARNING, + LOG_MBOX | LOG_SLI, + "0353 Active Mailbox cleared - mailbox timeout " + "exiting\n"); + spin_unlock_irq(&phba->hbalock); + return; + } + /* Mbox cmd timeout */ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "0310 Mailbox command x%x timeout Data: x%x x%x x%p\n", @@ -3258,6 +3270,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) phba->pport->port_state, phba->sli.sli_flag, phba->sli.mbox_active); + spin_unlock_irq(&phba->hbalock); /* Setting state unknown so lpfc_sli_abort_iocb_ring * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing @@ -3364,6 +3377,12 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) goto out_not_finished; } + /* If HBA has a deferred error attention, fail the iocb. */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irqrestore(&phba->hbalock, drvr_flag); + goto out_not_finished; + } + psli = &phba->sli; mb = &pmbox->mb; @@ -3728,6 +3747,10 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, if (unlikely(pci_channel_offline(phba->pcidev))) return IOCB_ERROR; + /* If HBA has a deferred error attention, fail the iocb. */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) + return IOCB_ERROR; + /* * We should never get an IOCB if we are in a < LINK_DOWN state */ @@ -3906,6 +3929,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, uint16_t temp; struct temp_event temp_event_data; struct Scsi_Host *shost; + uint32_t *iocb_w; icmd = &iocbq->iocb; evt_code = icmd->un.asyncstat.evt_code; @@ -3913,13 +3937,23 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, if ((evt_code != ASYNC_TEMP_WARN) && (evt_code != ASYNC_TEMP_SAFE)) { + iocb_w = (uint32_t *) icmd; lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0346 Ring %d handler: unexpected ASYNC_STATUS" - " evt_code 0x%x\n", + " evt_code 0x%x \n" + "W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n" + "W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n" + "W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n" + "W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n", pring->ringno, - icmd->un.asyncstat.evt_code); + icmd->un.asyncstat.evt_code, + iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3], + iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7], + iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11], + iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]); + return; } temp_event_data.data = (uint32_t)temp; @@ -4178,17 +4212,9 @@ lpfc_sli_host_down(struct lpfc_vport *vport) spin_unlock_irqrestore(&phba->hbalock, flags); - while (!list_empty(&completions)) { - list_remove_head(&completions, iocb, struct lpfc_iocbq, list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT; - iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); return 1; } @@ -4215,8 +4241,6 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) struct lpfc_sli_ring *pring; struct lpfc_dmabuf *buf_ptr; LPFC_MBOXQ_t *pmb; - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; int i; unsigned long flags = 0; @@ -4244,18 +4268,9 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } spin_unlock_irqrestore(&phba->hbalock, flags); - while (!list_empty(&completions)) { - list_remove_head(&completions, iocb, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); spin_lock_irqsave(&phba->hbalock, flags); list_splice_init(&phba->elsbuf, &completions); @@ -5137,11 +5152,31 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba) return 0; } + /* + * If there is deferred error attention, do not check for error + * attention + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return 0; + } + /* Read chip Host Attention (HA) register */ ha_copy = readl(phba->HAregaddr); if (ha_copy & HA_ERATT) { /* Read host status register to retrieve error event */ lpfc_sli_read_hs(phba); + + /* Check if there is a deferred error condition is active */ + if ((HS_FFER1 & phba->work_hs) && + ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | + HS_FFER6 | HS_FFER7) & phba->work_hs)) { + phba->hba_flag |= DEFER_ERATT; + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); + } + /* Set the driver HA work bitmap */ phba->work_ha |= HA_ERATT; /* Indicate polling handles this ERATT */ @@ -5230,6 +5265,16 @@ lpfc_sp_intr_handler(int irq, void *dev_id) /* Indicate interrupt handler handles ERATT */ phba->hba_flag |= HBA_ERATT_HANDLED; } + + /* + * If there is deferred error attention, do not check for any + * interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } + /* Clear up only attention source related to slow-path */ writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)), phba->HAregaddr); @@ -5301,8 +5346,22 @@ lpfc_sp_intr_handler(int irq, void *dev_id) } } spin_lock_irqsave(&phba->hbalock, iflag); - if (work_ha_copy & HA_ERATT) + if (work_ha_copy & HA_ERATT) { lpfc_sli_read_hs(phba); + /* + * Check if there is a deferred error condition + * is active + */ + if ((HS_FFER1 & phba->work_hs) && + ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | + HS_FFER6 | HS_FFER7) & phba->work_hs)) { + phba->hba_flag |= DEFER_ERATT; + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); + } + } + if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) { pmb = phba->sli.mbox_active; pmbox = &pmb->mb; @@ -5466,6 +5525,14 @@ lpfc_fp_intr_handler(int irq, void *dev_id) ha_copy = readl(phba->HAregaddr); /* Clear up only attention source related to fast-path */ spin_lock_irqsave(&phba->hbalock, iflag); + /* + * If there is deferred error attention, do not check for + * any interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)), phba->HAregaddr); readl(phba->HAregaddr); /* flush */ @@ -5558,6 +5625,14 @@ lpfc_intr_handler(int irq, void *dev_id) phba->hba_flag |= HBA_ERATT_HANDLED; } + /* + * If there is deferred error attention, do not check for any interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } + /* Clear attention sources except link and error attentions */ writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr); readl(phba->HAregaddr); /* flush */ -- cgit v0.10.2 From e832b3ca653895d479c872f995d0a31a0b0bdecd Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 6 Apr 2009 18:48:17 -0400 Subject: [SCSI] lpfc 8.3.1 : Update version to 8.3.1 Update driver version to 8.3.1 Also update copyright end year for driver. Signed-off-by: James Smart Signed-off-by: James Bottomley diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 7e32e95..e599519 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2008 Emulex. All rights reserved. * + * Copyright (C) 2004-2009 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.0" +#define LPFC_DRIVER_VERSION "8.3.1" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" @@ -26,4 +26,4 @@ #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \ LPFC_DRIVER_VERSION -#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex. All rights reserved." +#define LPFC_COPYRIGHT "Copyright(c) 2004-2009 Emulex. All rights reserved." -- cgit v0.10.2 From b4efdd586bc08cdf5977cad0a90091f44546a930 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 9 Apr 2009 15:57:10 -0500 Subject: [SCSI] fix q->lock not held warning when target is busy We cannot call blk_plug_device from scsi_target_queue_ready because the q lock is not held. And we do not need to call it from there because when we return 0, the scsi_request_fn not_ready handling will plug the queue for us if needed. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d1cb64a..bb218c8 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1291,10 +1291,8 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost, if (--starget->target_blocked == 0) { SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget, "unblocking target at zero depth\n")); - } else { - blk_plug_device(sdev->request_queue); + } else return 0; - } } if (scsi_target_is_busy(starget)) { -- cgit v0.10.2 From fd1b52435a6d9663de896e8437ef067372916ef3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 7 Apr 2009 18:10:06 +0200 Subject: quota: remove obsolete comments in fs/quota/Makefile Get rid of useless comments and the equally useless obj-y initialization. Signed-off-by: Christoph Hellwig Signed-off-by: Jan Kara diff --git a/fs/quota/Makefile b/fs/quota/Makefile index 385a083..68d4f6d 100644 --- a/fs/quota/Makefile +++ b/fs/quota/Makefile @@ -1,12 +1,3 @@ -# -# Makefile for the Linux filesystems. -# -# 14 Sep 2000, Christoph Hellwig -# Rewritten to use lists instead of if-statements. -# - -obj-y := - obj-$(CONFIG_QUOTA) += dquot.o obj-$(CONFIG_QFMT_V1) += quota_v1.o obj-$(CONFIG_QFMT_V2) += quota_v2.o -- cgit v0.10.2 From a069e9cee1dba2f847839d325f46ce6976ed1b76 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 9 Apr 2009 18:07:10 +0200 Subject: ext2: missing unlock in ext2_quota_write() The inode->i_mutex should be unlocked. Found by smatch (http://repo.or.cz/w/smatch.git). Compile tested. Signed-off-by: Dan Carpenter Signed-off-by: Jan Kara diff --git a/fs/ext2/super.c b/fs/ext2/super.c index f983225..5c4afe6 100644 --- a/fs/ext2/super.c +++ b/fs/ext2/super.c @@ -1395,8 +1395,10 @@ static ssize_t ext2_quota_write(struct super_block *sb, int type, blk++; } out: - if (len == towrite) + if (len == towrite) { + mutex_unlock(&inode->i_mutex); return err; + } if (inode->i_size < off+len-towrite) i_size_write(inode, off+len-towrite); inode->i_version++; -- cgit v0.10.2 From e37469f68a15feb40ee9f6325d1e1793f90afe39 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 27 Apr 2009 11:55:17 +0100 Subject: FRV: Wire up new syscalls Wire up new system calls for the FRV arch (preadv and pwritev). Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index edcfaf5..96d78d5 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -339,10 +339,12 @@ #define __NR_dup3 330 #define __NR_pipe2 331 #define __NR_inotify_init1 332 +#define __NR_preadv 333 +#define __NR_pwritev 334 #ifdef __KERNEL__ -#define NR_syscalls 333 +#define NR_syscalls 335 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 99060ab..1da523b 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1525,5 +1525,7 @@ sys_call_table: .long sys_dup3 /* 330 */ .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev syscall_table_size = (. - sys_call_table) -- cgit v0.10.2 From 9a523d427dc5908a79ce3ff742e9606e852802d6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 27 Apr 2009 11:55:23 +0100 Subject: FRV: Stop gcc from generating uninitialised variable warnings after BUG() Stop gcc from generating uninitialised variable warnings after BUG(). The problem is that FRV's call into its gdbstub appears to return (if the function is marked noreturn, then the compiler is under no obligation to pass it a return address, and so GDB won't know where the bug happened). To get around this, we make the do...while wrapper in _debug_bug_trap() an endless loop from which there's no escape. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/frv/include/asm/bug.h b/arch/frv/include/asm/bug.h index 6b1b44d..2e05450 100644 --- a/arch/frv/include/asm/bug.h +++ b/arch/frv/include/asm/bug.h @@ -30,7 +30,7 @@ extern void __debug_bug_printk(const char *file, unsigned line); do { \ __debug_bug_trap(signr); \ asm volatile("nop"); \ -} while(0) +} while(1) #define HAVE_ARCH_BUG #define BUG() \ @@ -46,7 +46,8 @@ do { \ #define HAVE_ARCH_KGDB_BAD_PAGE #define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0) #endif -#endif + +#endif /* CONFIG_BUG */ #include -- cgit v0.10.2 From 135ea137e3c2872448c12d3a8890389fa64990c6 Mon Sep 17 00:00:00 2001 From: Martin Petermann Date: Fri, 17 Apr 2009 15:08:01 +0200 Subject: [SCSI] zfcp: Avoid referencing freed memory in req send Avoid referencing a fsf request after sending it in fcp_fsf_req_send, it might have already completed and deallocated. Signed-off-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index b29f312..fa896dc 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -766,8 +766,9 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter, static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; - unsigned long flags; - int idx; + unsigned long flags; + int idx; + int with_qtcb = (req->qtcb != NULL); /* put allocated FSF request into hash table */ spin_lock_irqsave(&adapter->req_list_lock, flags); @@ -789,7 +790,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) } /* Don't increase for unsolicited status */ - if (req->qtcb) + if (with_qtcb) adapter->fsf_req_seq_no++; adapter->req_no++; -- cgit v0.10.2 From 306b6edcdd7b6cc5fee50d48fc398201fa3df841 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Fri, 17 Apr 2009 15:08:02 +0200 Subject: [SCSI] zfcp: Enable auto-port discovery for NPIV. Since we're setting the host port type now to FC_PORTTYPE_NPIV for adapters running in NPIV mode we should allow this port type for auto-port scanning as well. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index e8d032b..e56141d 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -637,7 +637,8 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter) max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES; max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE; - if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) + if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT && + fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV) return 0; ret = zfcp_wka_port_get(&adapter->nsp); -- cgit v0.10.2 From ada81b748b768eb5b75567fd1db5e87ba5c98bf0 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 17 Apr 2009 15:08:03 +0200 Subject: [SCSI] zfcp: Dont call zfcp_fsf_req_free on NULL pointer Fix problem that zfcp_fsf_exchange_config_data_sync and zfcp_fsf_exchange_config_data_sync could try to call zfcp_fsf_req_free with a NULL pointer. Reviewed-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index fa896dc..a8e8406 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1254,13 +1254,13 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) - goto out; + goto out_unlock; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA, 0, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); - goto out; + goto out_unlock; } sbale = zfcp_qdio_sbale_req(req); @@ -1279,14 +1279,16 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); -out: spin_unlock_bh(&adapter->req_q_lock); if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); zfcp_fsf_req_free(req); + return retval; +out_unlock: + spin_unlock_bh(&adapter->req_q_lock); return retval; } @@ -1353,13 +1355,13 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) - goto out; + goto out_unlock; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); - goto out; + goto out_unlock; } if (data) @@ -1372,14 +1374,18 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, req->handler = zfcp_fsf_exchange_port_data_handler; zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); -out: spin_unlock_bh(&adapter->req_q_lock); + if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); zfcp_fsf_req_free(req); return retval; + +out_unlock: + spin_unlock_bh(&adapter->req_q_lock); + return retval; } static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req) -- cgit v0.10.2 From 92d5193b467c68e8432d6878980621c787e735af Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Fri, 17 Apr 2009 15:08:04 +0200 Subject: [SCSI] zfcp: Dont block zfcp_wq with scan When running the scsi_scan from the zfcp workqueue and the target device does not respond, the zfcp workqueue can block until the scsi_scan hits a timeout. Move the work to the scsi host workqueue, since this one is also used for the scan from the SCSI midlayer. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 616c60f..5a01ef9 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -97,9 +97,7 @@ static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun) ccw_device_set_online(adapter->ccw_device); zfcp_erp_wait(adapter); - wait_event(adapter->erp_done_wqh, - !(atomic_read(&unit->status) & - ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)); + flush_work(&unit->scsi_work); down(&zfcp_data.config_sema); zfcp_unit_put(unit); @@ -279,6 +277,7 @@ struct zfcp_unit *zfcp_unit_enqueue(struct zfcp_port *port, u64 fcp_lun) atomic_set(&unit->refcount, 0); init_waitqueue_head(&unit->remove_wq); + INIT_WORK(&unit->scsi_work, zfcp_scsi_scan); unit->port = port; unit->fcp_lun = fcp_lun; diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index a031863..4c362a9 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -255,7 +255,6 @@ enum zfcp_wka_status { /* logical unit status */ #define ZFCP_STATUS_UNIT_SHARED 0x00000004 #define ZFCP_STATUS_UNIT_READONLY 0x00000008 -#define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING 0x00000020 /* FSF request status (this does not have a common part) */ #define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT 0x00000002 @@ -530,6 +529,7 @@ struct zfcp_unit { struct zfcp_erp_action erp_action; /* pending error recovery */ atomic_t erp_counter; struct zfcp_latencies latencies; + struct work_struct scsi_work; }; /* FSF request */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 631bdb1..4e16052 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -1176,48 +1176,6 @@ static void zfcp_erp_action_dequeue(struct zfcp_erp_action *erp_action) } } -struct zfcp_erp_add_work { - struct zfcp_unit *unit; - struct work_struct work; -}; - -static void zfcp_erp_scsi_scan(struct work_struct *work) -{ - struct zfcp_erp_add_work *p = - container_of(work, struct zfcp_erp_add_work, work); - struct zfcp_unit *unit = p->unit; - struct fc_rport *rport = unit->port->rport; - - if (rport && rport->port_state == FC_PORTSTATE_ONLINE) - scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, - scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); - atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); - zfcp_unit_put(unit); - wake_up(&unit->port->adapter->erp_done_wqh); - kfree(p); -} - -static void zfcp_erp_schedule_work(struct zfcp_unit *unit) -{ - struct zfcp_erp_add_work *p; - - p = kzalloc(sizeof(*p), GFP_KERNEL); - if (!p) { - dev_err(&unit->port->adapter->ccw_device->dev, - "Registering unit 0x%016Lx on port 0x%016Lx failed\n", - (unsigned long long)unit->fcp_lun, - (unsigned long long)unit->port->wwpn); - return; - } - - zfcp_unit_get(unit); - atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); - INIT_WORK(&p->work, zfcp_erp_scsi_scan); - p->unit = unit; - if (!queue_work(zfcp_data.work_queue, &p->work)) - zfcp_unit_put(unit); -} - static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) { struct zfcp_adapter *adapter = act->adapter; @@ -1226,11 +1184,11 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) switch (act->action) { case ZFCP_ERP_ACTION_REOPEN_UNIT: - flush_work(&port->rport_work); if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) { - if (!(atomic_read(&unit->status) & - ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)) - zfcp_erp_schedule_work(unit); + zfcp_unit_get(unit); + if (scsi_queue_work(unit->port->adapter->scsi_host, + &unit->scsi_work) <= 0) + zfcp_unit_put(unit); } zfcp_unit_put(unit); break; diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index f6399ca..df740f1 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -158,6 +158,7 @@ extern void zfcp_scsi_rport_work(struct work_struct *); extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *); extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *); extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *); +extern void zfcp_scsi_scan(struct work_struct *); /* zfcp_sysfs.c */ extern struct attribute_group zfcp_sysfs_unit_attrs; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 58201e1..5b11386 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -583,6 +583,23 @@ void zfcp_scsi_rport_work(struct work_struct *work) } +void zfcp_scsi_scan(struct work_struct *work) +{ + struct zfcp_unit *unit = container_of(work, struct zfcp_unit, + scsi_work); + struct fc_rport *rport; + + flush_work(&unit->port->rport_work); + rport = unit->port->rport; + + if (rport && rport->port_state == FC_PORTSTATE_ONLINE) + scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, + scsilun_to_int((struct scsi_lun *) + &unit->fcp_lun), 0); + + zfcp_unit_put(unit); +} + struct fc_function_template zfcp_transport_functions = { .show_starget_port_id = 1, .show_starget_port_name = 1, -- cgit v0.10.2 From 828bc1212a685918bbdb5866504b63eea2c241f5 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Fri, 17 Apr 2009 15:08:05 +0200 Subject: [SCSI] zfcp: Set WKA-port to offline on adapter deactivation The nameserver port might be in state online when the adapter is offlined. On adapter reactivation the nameserver port is not re-opened due to the PORT_ONLINE status. This results in an unsuccessful recovery. In forcing the nameserver port status to offline on all adapter offline events this issue is prevented. Waiting for the reference count to drop to zero in zfcp_wka_port_offline is not required, so remove it. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 5a01ef9..a00d2bb 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -524,6 +524,8 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device) atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status); + zfcp_fc_nameserver_init(adapter); + if (!zfcp_adapter_scsi_register(adapter)) return 0; @@ -552,7 +554,6 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter) cancel_work_sync(&adapter->scan_work); cancel_work_sync(&adapter->stat_work); - cancel_delayed_work_sync(&adapter->nsp.work); zfcp_adapter_scsi_unregister(adapter); sysfs_remove_group(&adapter->ccw_device->dev.kobj, &zfcp_sysfs_adapter_attrs); diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index cfb0dcb..733fe3b 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -108,7 +108,6 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) /* initialize request counter */ BUG_ON(!zfcp_reqlist_isempty(adapter)); adapter->req_no = 0; - zfcp_fc_nameserver_init(adapter); zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 4e16052..b73e370 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -719,6 +719,7 @@ static void zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *act) zfcp_qdio_close(adapter); zfcp_fsf_req_dismiss_all(adapter); adapter->fsf_req_seq_no = 0; + zfcp_fc_wka_port_force_offline(&adapter->nsp); /* all ports and units are closed */ zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index df740f1..2e31b53 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -106,6 +106,7 @@ extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *); extern void zfcp_test_link(struct zfcp_port *); extern void zfcp_fc_link_test_work(struct work_struct *); extern void zfcp_fc_nameserver_init(struct zfcp_adapter *); +extern void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *); /* zfcp_fsf.c */ extern int zfcp_fsf_open_port(struct zfcp_erp_action *); diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index e56141d..5d42929 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -98,13 +98,6 @@ static void zfcp_wka_port_offline(struct work_struct *work) struct zfcp_wka_port *wka_port = container_of(dw, struct zfcp_wka_port, work); - /* Don't wait forvever. If the wka_port is too busy take it offline - through a new call later */ - if (!wait_event_timeout(wka_port->completion_wq, - atomic_read(&wka_port->refcount) == 0, - HZ >> 1)) - return; - mutex_lock(&wka_port->mutex); if ((atomic_read(&wka_port->refcount) != 0) || (wka_port->status != ZFCP_WKA_PORT_ONLINE)) @@ -142,6 +135,14 @@ void zfcp_fc_nameserver_init(struct zfcp_adapter *adapter) INIT_DELAYED_WORK(&wka_port->work, zfcp_wka_port_offline); } +void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka) +{ + cancel_delayed_work_sync(&wka->work); + mutex_lock(&wka->mutex); + wka->status = ZFCP_WKA_PORT_OFFLINE; + mutex_unlock(&wka->mutex); +} + static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, struct fcp_rscn_element *elem) { -- cgit v0.10.2 From 94ab4b38b2ab35a8ca955f4821c970a0ed7ec9ec Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Fri, 17 Apr 2009 15:08:06 +0200 Subject: [SCSI] zfcp: avoid false ERP complete due to sema race The ERP thread is performing a task before it is executing the corresponding down on the semaphore. The response handler of the just started exchange config should wait for the completion by performing a down on this semaphore. Since this semaphore is still positive from the ERP enqueue the handler won't wait and therefore the exchange config will always fail leaving the adapter in error. The problem can be solved by performing the down on the semaphore before starting an ERP task. This is the logically correct order. Only walk the ERP loop if there is a task to perform. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index b73e370..fdc9b43 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -1311,6 +1311,11 @@ static int zfcp_erp_thread(void *data) while (!(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL)) { + + zfcp_rec_dbf_event_thread_lock("erthrd1", adapter); + ignore = down_interruptible(&adapter->erp_ready_sem); + zfcp_rec_dbf_event_thread_lock("erthrd2", adapter); + write_lock_irqsave(&adapter->erp_lock, flags); next = adapter->erp_ready_head.next; write_unlock_irqrestore(&adapter->erp_lock, flags); @@ -1322,10 +1327,6 @@ static int zfcp_erp_thread(void *data) if (zfcp_erp_strategy(act) != ZFCP_ERP_DISMISSED) zfcp_erp_wakeup(adapter); } - - zfcp_rec_dbf_event_thread_lock("erthrd1", adapter); - ignore = down_interruptible(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread_lock("erthrd2", adapter); } atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status); -- cgit v0.10.2 From d81ad31c6cf4e318e6b94c959bd9a56ca440b279 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Fri, 17 Apr 2009 15:08:07 +0200 Subject: [SCSI] zfcp: no port recovery after storage side error inject The remote port remains in error state even if the connection is re-established. A wrong precondition check was performed on the port status leading to a cancellation of the port reopen. Remove the pre-req check because it's not required and better handled within the ERP. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 5d42929..a0f9250 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -432,11 +432,6 @@ void zfcp_fc_link_test_work(struct work_struct *work) container_of(work, struct zfcp_port, test_link_work); int retval; - if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) { - zfcp_port_put(port); - return; /* port erp is running and will update rport status */ - } - zfcp_port_get(port); port->rport_task = RPORT_DEL; zfcp_scsi_rport_work(&port->rport_work); -- cgit v0.10.2 From 048225e3f44f07c0f67e9665be0b4f18788de0eb Mon Sep 17 00:00:00 2001 From: Martin Petermann Date: Fri, 17 Apr 2009 15:08:08 +0200 Subject: [SCSI] zfcp: remove unit will fail if add unit is not finished On some hardware it can take some time to add a unit. If some remove this unit during this process the remove will fail. Signed-off-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c index 9a3b8e2..3e51e64 100644 --- a/drivers/s390/scsi/zfcp_sysfs.c +++ b/drivers/s390/scsi/zfcp_sysfs.c @@ -254,12 +254,21 @@ static ssize_t zfcp_sysfs_unit_remove_store(struct device *dev, write_lock_irq(&zfcp_data.config_lock); unit = zfcp_get_unit_by_lun(port, fcp_lun); - if (unit && (atomic_read(&unit->refcount) == 0)) { - zfcp_unit_get(unit); - atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status); - list_move(&unit->list, &unit_remove_lh); - } else - unit = NULL; + if (unit) { + write_unlock_irq(&zfcp_data.config_lock); + /* wait for possible timeout during SCSI probe */ + flush_work(&unit->scsi_work); + write_lock_irq(&zfcp_data.config_lock); + + if (atomic_read(&unit->refcount) == 0) { + zfcp_unit_get(unit); + atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, + &unit->status); + list_move(&unit->list, &unit_remove_lh); + } else { + unit = NULL; + } + } write_unlock_irq(&zfcp_data.config_lock); -- cgit v0.10.2 From f7306bf6150161689aaa445c433699895f446208 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 17 Apr 2009 15:08:09 +0200 Subject: [SCSI] zfcp: Let actcli handle control file errors Error codes specific to the control file requests are evaluated by the actcli tool, so don't report -ENXIO for those. Generic problems are still checked for outside the command specific handler. Reviewed-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index a8e8406..bd2b237 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -2479,8 +2479,6 @@ out: static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req) { - if (req->qtcb->header.fsf_status != FSF_GOOD) - req->status |= ZFCP_STATUS_FSFREQ_ERROR; } /** -- cgit v0.10.2 From 5b43e719308143ac02e6f4ee24132f8acad99ea7 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Fri, 17 Apr 2009 15:08:10 +0200 Subject: [SCSI] zfcp: no port recovery after ADISC request timeout A remote port remains in error state even if we receive a RSCN stating that the connection is re-established. The port recovery is not started due to a flag which is not reset. The solution is to clear the flag in question before we trigger a ERP. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index a0f9250..db40968 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -373,7 +373,8 @@ static void zfcp_fc_adisc_handler(unsigned long data) if (adisc->els.status) { /* request rejected or timed out */ - zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL); + zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, + "fcadh_1", NULL); goto out; } -- cgit v0.10.2 From c6936e7f34383db2f5038dfa2f0c168ebc2920e5 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 17 Apr 2009 15:08:11 +0200 Subject: [SCSI] zfcp: Fix abort handler for completions in progress When the abort handler cannot find a pending FSF request, the request completion could just be running. This means we cannot return SUCCESS, since this would lead to call to scsi_done after exiting the SCSI error handler which is not allowed. Reviewed-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 5b11386..e7d0652 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -171,7 +171,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt) write_unlock_irqrestore(&adapter->abort_lock, flags); zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL, old_req_id); - return SUCCESS; + return FAILED; /* completion could be in progress */ } old_req->data = NULL; -- cgit v0.10.2 From 7001f0c4863230dd1560425fa0f5aad9e21716b8 Mon Sep 17 00:00:00 2001 From: Martin Petermann Date: Fri, 17 Apr 2009 15:08:12 +0200 Subject: [SCSI] zfcp: revert previous patch for sbal counting The current sbal counting can be wrong if a fsf request is waiting for free sbals and at the same time qdio request queue is shutdown and re-opened. Revering a previous patch fixes this issue. Signed-off-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index bd2b237..3f365ac 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -645,30 +645,30 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req) } } -static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) - __releases(&adapter->req_q_lock) - __acquires(&adapter->req_q_lock) +static int zfcp_fsf_sbal_check(struct zfcp_adapter *adapter) { struct zfcp_qdio_queue *req_q = &adapter->req_q; - long ret; - if (atomic_read(&req_q->count) <= -REQUEST_LIST_SIZE) - return -EIO; - if (atomic_read(&req_q->count) > 0) - return 0; + spin_lock_bh(&adapter->req_q_lock); + if (atomic_read(&req_q->count)) + return 1; + spin_unlock_bh(&adapter->req_q_lock); + return 0; +} + +static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) +{ + long ret; - atomic_dec(&req_q->count); spin_unlock_bh(&adapter->req_q_lock); ret = wait_event_interruptible_timeout(adapter->request_wq, - atomic_read(&req_q->count) >= 0, - 5 * HZ); - spin_lock_bh(&adapter->req_q_lock); - atomic_inc(&req_q->count); - + zfcp_fsf_sbal_check(adapter), 5 * HZ); if (ret > 0) return 0; if (!ret) atomic_inc(&adapter->qdio_outb_full); + + spin_lock_bh(&adapter->req_q_lock); return -EIO; } -- cgit v0.10.2 From 6ab35c0713daf8cd68f272a4be8dfc02c86bbd3b Mon Sep 17 00:00:00 2001 From: Martin Petermann Date: Fri, 17 Apr 2009 15:08:13 +0200 Subject: [SCSI] zfcp: Fix port reference counting If this problem appears zfcp ports cannot be de-queued since it is checked for a zero refcount. The port reference counting is wrong for existing zfcp ports when e.g. an adapter gets on-line again. During port scanning the reference counting for existing ports should not be changed. Signed-off-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index db40968..19ae084 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -539,6 +539,9 @@ static void zfcp_validate_port(struct zfcp_port *port) { struct zfcp_adapter *adapter = port->adapter; + if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC)) + return; + atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status); if ((port->supported_classes != 0) || @@ -599,10 +602,8 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft, int max_entries) if (acc->wwpn == fc_host_port_name(adapter->scsi_host)) continue; port = zfcp_get_port_by_wwpn(adapter, acc->wwpn); - if (port) { - zfcp_port_get(port); + if (port) continue; - } port = zfcp_port_enqueue(adapter, acc->wwpn, ZFCP_STATUS_COMMON_NOESC, d_id); -- cgit v0.10.2 From 3869bb6e73f5f55ce16b13025726b0bfdf1f4aae Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 17 Apr 2009 15:08:14 +0200 Subject: [SCSI] zfcp: Reference counting for cfdc requests Before dropping the reference count with zfcp_adapter_put, increase it with zfcp_adapter_get when issuing cfdc requests. Reviewed-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c index 10cbfd1..8305c87 100644 --- a/drivers/s390/scsi/zfcp_cfdc.c +++ b/drivers/s390/scsi/zfcp_cfdc.c @@ -4,7 +4,7 @@ * Userspace interface for accessing the * Access Control Lists / Control File Data Channel * - * Copyright IBM Corporation 2008 + * Copyright IBM Corporation 2008, 2009 */ #define KMSG_COMPONENT "zfcp" @@ -197,6 +197,7 @@ static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command, retval = -ENXIO; goto free_buffer; } + zfcp_adapter_get(adapter); retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg, data_user->control_file); -- cgit v0.10.2 From 70932935b61ee3dcc5a419ec4c367feb2ff808e4 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 17 Apr 2009 15:08:15 +0200 Subject: [SCSI] zfcp: Fix oops when port disappears The zfcp_port might have been removed, while the FC fast_io_fail timer is still running and could trigger the terminate_rport_io callback. Set the pointer to the zfcp_port to NULL and check accordingly before using it. Reviewed-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index a00d2bb..3ac27ee 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -671,8 +671,7 @@ void zfcp_port_dequeue(struct zfcp_port *port) list_del(&port->list); write_unlock_irq(&zfcp_data.config_lock); if (port->rport) - fc_remote_port_delete(port->rport); - port->rport = NULL; + port->rport->dd_data = NULL; zfcp_adapter_put(port->adapter); sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs); device_unregister(&port->sysfs_device); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 3f365ac..74dee32 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -172,12 +172,16 @@ static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, char *id, struct fsf_link_down_info *link_down) { struct zfcp_adapter *adapter = req->adapter; + unsigned long flags; if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED) return; atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status); + + read_lock_irqsave(&zfcp_data.config_lock, flags); zfcp_scsi_schedule_rports_block(adapter); + read_unlock_irqrestore(&zfcp_data.config_lock, flags); if (!link_down) goto out; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index e7d0652..e8fbeae 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -486,10 +486,12 @@ static void zfcp_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout) */ static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport) { - struct zfcp_port *port = rport->dd_data; + struct zfcp_port *port; write_lock_irq(&zfcp_data.config_lock); - port->rport = NULL; + port = rport->dd_data; + if (port) + port->rport = NULL; write_unlock_irq(&zfcp_data.config_lock); } @@ -503,9 +505,18 @@ static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport) */ static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport) { - struct zfcp_port *port = rport->dd_data; + struct zfcp_port *port; + + write_lock_irq(&zfcp_data.config_lock); + port = rport->dd_data; + if (port) + zfcp_port_get(port); + write_unlock_irq(&zfcp_data.config_lock); - zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL); + if (port) { + zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL); + zfcp_port_put(port); + } } static void zfcp_scsi_rport_register(struct zfcp_port *port) @@ -534,8 +545,10 @@ static void zfcp_scsi_rport_register(struct zfcp_port *port) static void zfcp_scsi_rport_block(struct zfcp_port *port) { - if (port->rport) - fc_remote_port_delete(port->rport); + struct fc_rport *rport = port->rport; + + if (rport) + fc_remote_port_delete(rport); } void zfcp_scsi_schedule_rport_register(struct zfcp_port *port) -- cgit v0.10.2 From 9a6510eb3f030cedba32664498a610dc6d084d46 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 21 Apr 2009 15:32:31 -0500 Subject: [SCSI] iscsi_tcp: don't fire conn error if pdu init fails If a command's scsi cmd pdu setup fails then we can just fail the IO to the scsi layer. If a DATA_OUT for a R2T fails then we will want to drop the session, because it means we got a bad request from the target (iscsi protocol error). This patch has us propogate the error upwards so libiscsi_tcp or libiscsi can decide what the best action is to take. It also fixes a bug where we could try to grab the session lock while holding it, because if iscsi_tcp drops the session in the pdu setup callout the session lock is held when setting up the scsi cmd pdu. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index b3e5e08..f97fc7e 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -463,7 +463,7 @@ static int iscsi_sw_tcp_pdu_init(struct iscsi_task *task, } if (err) { - iscsi_conn_failure(conn, err); + /* got invalid offset/len */ return -EIO; } return 0; diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 91f8ce4..b579ca9 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -1036,8 +1036,11 @@ flush: rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent, r2t->data_count); - if (rc) + if (rc) { + iscsi_conn_failure(conn, ISCSI_ERR_XMIT_FAILED); return rc; + } + r2t->sent += r2t->data_count; goto flush; } -- cgit v0.10.2 From 6b5d6c443a9b4fd71b633cef66b5db4de8a85787 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 21 Apr 2009 15:32:32 -0500 Subject: [SCSI] cxgb3i, iser, iscsi_tcp: set target can queue Set target can queue limit to the number of preallocated session tasks we have. This along with the cxgb3i can_queue patch will fix a throughput problem where it could only queue one LU worth of data at a time. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 13d7674..75223f5 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -599,6 +599,7 @@ static struct scsi_host_template iscsi_iser_sht = { .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler= iscsi_eh_device_reset, .eh_target_reset_handler= iscsi_eh_target_reset, + .target_alloc = iscsi_target_alloc, .use_clustering = DISABLE_CLUSTERING, .proc_name = "iscsi_iser", .this_id = -1, diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index fff8e43..b3ca3a0 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -883,6 +883,7 @@ static struct scsi_host_template cxgb3i_host_template = { .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler = iscsi_eh_device_reset, .eh_target_reset_handler = iscsi_eh_target_reset, + .target_alloc = iscsi_target_alloc, .use_clustering = DISABLE_CLUSTERING, .this_id = -1, }; diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index f97fc7e..b7c092d 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -851,6 +851,7 @@ static struct scsi_host_template iscsi_sw_tcp_sht = { .use_clustering = DISABLE_CLUSTERING, .slave_alloc = iscsi_sw_tcp_slave_alloc, .slave_configure = iscsi_sw_tcp_slave_configure, + .target_alloc = iscsi_target_alloc, .proc_name = "iscsi_tcp", .this_id = -1, }; diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 6896283..e72b4ad 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1463,6 +1463,16 @@ int iscsi_change_queue_depth(struct scsi_device *sdev, int depth) } EXPORT_SYMBOL_GPL(iscsi_change_queue_depth); +int iscsi_target_alloc(struct scsi_target *starget) +{ + struct iscsi_cls_session *cls_session = starget_to_session(starget); + struct iscsi_session *session = cls_session->dd_data; + + starget->can_queue = session->scsi_cmds_max; + return 0; +} +EXPORT_SYMBOL_GPL(iscsi_target_alloc); + void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session) { struct iscsi_session *session = cls_session->dd_data; diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 7ffaed2..0289f57 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -36,6 +36,7 @@ struct scsi_transport_template; struct scsi_host_template; struct scsi_device; struct Scsi_Host; +struct scsi_target; struct scsi_cmnd; struct socket; struct iscsi_transport; @@ -350,6 +351,7 @@ extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, bool xmit_can_sleep); extern void iscsi_host_remove(struct Scsi_Host *shost); extern void iscsi_host_free(struct Scsi_Host *shost); +extern int iscsi_target_alloc(struct scsi_target *starget); /* * session management -- cgit v0.10.2 From dd0af9f94e54efb13ee050ebac11909215ef02c2 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 21 Apr 2009 15:32:33 -0500 Subject: [SCSI] cxgb3i: fix can_queue and cmd_per_lun initialization cxgb3i was setting can_queue to only 128 commands, and was setting the can_queue and cmd_per_lun to the same value. This sets the can_queue to 1024 commands, and sets the cmd_per_lun to a safer default of 32. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h index d362860..59b0958 100644 --- a/drivers/scsi/cxgb3i/cxgb3i.h +++ b/drivers/scsi/cxgb3i/cxgb3i.h @@ -34,7 +34,7 @@ #include "cxgb3i_offload.h" #include "cxgb3i_ddp.h" -#define CXGB3I_SCSI_QDEPTH_DFLT 128 +#define CXGB3I_SCSI_HOST_QDEPTH 1024 #define CXGB3I_MAX_TARGET CXGB3I_MAX_CONN #define CXGB3I_MAX_LUN 512 #define ISCSI_PDU_NONPAYLOAD_MAX \ diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index b3ca3a0..9212400 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -876,10 +876,10 @@ static struct scsi_host_template cxgb3i_host_template = { .proc_name = "cxgb3i", .queuecommand = iscsi_queuecommand, .change_queue_depth = iscsi_change_queue_depth, - .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1, + .can_queue = CXGB3I_SCSI_HOST_QDEPTH, .sg_tablesize = SG_ALL, .max_sectors = 0xFFFF, - .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT, + .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler = iscsi_eh_device_reset, .eh_target_reset_handler = iscsi_eh_target_reset, -- cgit v0.10.2 From 1393109f23f8ad753a60a3e461c6caa96d8524f3 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 21 Apr 2009 15:32:34 -0500 Subject: [SCSI] cxgb3i: fix cpu use abuse during writes When doing a lot (128) of large writes (256K) we can hit the cxgb3_snd_win check pretty easily. The driver's xmit thread then takes 100% of the cpu. The driver should not be returning -EAGAIN for this problem. It should be returing -ENOBUFS, then when the window is opened again it should queue the xmit thread (it already wakes the xmit thread). Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index 4d8654c..e11c9c1 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -1737,7 +1737,7 @@ int cxgb3i_c3cn_send_pdus(struct s3_conn *c3cn, struct sk_buff *skb) c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n", c3cn, c3cn->write_seq, c3cn->snd_una, cxgb3_snd_win); - err = -EAGAIN; + err = -ENOBUFS; goto out_err; } @@ -1775,6 +1775,8 @@ done: out_err: if (copied == 0 && err == -EPIPE) copied = c3cn->err ? c3cn->err : -EPIPE; + else + copied = err; goto done; } diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c index 7eebc9a..7091050 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c @@ -400,17 +400,18 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task) return 0; } - if (err < 0 && err != -EAGAIN) { - kfree_skb(skb); - cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", - task->itt, skb, skb->len, skb->data_len, err); - iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); - iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); + if (err == -EAGAIN || err == -ENOBUFS) { + /* reset skb to send when we are called again */ + tdata->skb = skb; return err; } - /* reset skb to send when we are called again */ - tdata->skb = skb; - return -EAGAIN; + + kfree_skb(skb); + cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", + task->itt, skb, skb->len, skb->data_len, err); + iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); + iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); + return err; } int cxgb3i_pdu_init(void) -- cgit v0.10.2 From a53922ddcf69f4bd8aa321b1fb30418df7a86c61 Mon Sep 17 00:00:00 2001 From: "kxie@chelsio.com" Date: Tue, 21 Apr 2009 15:32:35 -0500 Subject: [SCSI] cxgb3i: fix ddp map overrun (version 2) Fixed a bug in calculating ddp map range when search for free entries: it was going beyond the end by one, thus corrupting gl_skb[0]. Signed-off-by: Karen Xie Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c index d06a661..99c9125 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c +++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c @@ -120,20 +120,26 @@ static void clear_ddp_map(struct cxgb3i_ddp_info *ddp, unsigned int tag, } static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp, - int start, int max, int count, + unsigned int start, unsigned int max, + unsigned int count, struct cxgb3i_gather_list *gl) { - unsigned int i, j; + unsigned int i, j, k; + /* not enough entries */ + if ((max - start) < count) + return -EBUSY; + + max -= count; spin_lock(&ddp->map_lock); - for (i = start; i <= max;) { - for (j = 0; j < count; j++) { - if (ddp->gl_map[i + j]) + for (i = start; i < max;) { + for (j = 0, k = i; j < count; j++, k++) { + if (ddp->gl_map[k]) break; } if (j == count) { - for (j = 0; j < count; j++) - ddp->gl_map[i + j] = gl; + for (j = 0, k = i; j < count; j++, k++) + ddp->gl_map[k] = gl; spin_unlock(&ddp->map_lock); return i; } @@ -354,7 +360,7 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid, struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi; struct pagepod_hdr hdr; unsigned int npods; - int idx = -1, idx_max; + int idx = -1; int err = -ENOMEM; u32 sw_tag = *tagp; u32 tag; @@ -367,17 +373,17 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid, } npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT; - idx_max = ddp->nppods - npods + 1; if (ddp->idx_last == ddp->nppods) - idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl); + idx = ddp_find_unused_entries(ddp, 0, ddp->nppods, npods, gl); else { idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1, - idx_max, npods, gl); - if (idx < 0 && ddp->idx_last >= npods) + ddp->nppods, npods, gl); + if (idx < 0 && ddp->idx_last >= npods) { idx = ddp_find_unused_entries(ddp, 0, - ddp->idx_last - npods + 1, + min(ddp->idx_last + npods, ddp->nppods), npods, gl); + } } if (idx < 0) { ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n", -- cgit v0.10.2 From 0d228c0f7f9e3ade147e57682915c55b92448230 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Tue, 21 Apr 2009 16:26:52 -0700 Subject: [SCSI] libfc: Hold disc mutex while processing gpn ft resp gpn_ft_resp processing currently does not hold the discovery lock. disc_done() thus gets called from gpn_ft_resp or from gpn_ft_parse without the lock held. This then sets disc->pending to zero or calls gpn_ft_req() without disc_lock held. - Hold disc mutex during gpn_ft resp processing - In disc_done, release the disc mutex while calling lport callback Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index e57556ea..4480630 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -461,21 +461,29 @@ static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport) /** * fc_disc_done() - Discovery has been completed * @disc: FC discovery context + * Locking Note: This function expects that the disc mutex is locked before + * it is called. The discovery callback is then made with the lock released, + * and the lock is re-taken before returning from this function */ static void fc_disc_done(struct fc_disc *disc) { struct fc_lport *lport = disc->lport; + enum fc_disc_event event; FC_DEBUG_DISC("Discovery complete for port (%6x)\n", fc_host_port_id(lport->host)); - disc->disc_callback(lport, disc->event); + event = disc->event; disc->event = DISC_EV_NONE; if (disc->requested) fc_disc_gpn_ft_req(disc); else disc->pending = 0; + + mutex_unlock(&disc->disc_mutex); + disc->disc_callback(lport, event); + mutex_lock(&disc->disc_mutex); } /** @@ -681,8 +689,8 @@ static void fc_disc_timeout(struct work_struct *work) * @fp: response frame * @lp_arg: Fibre Channel host port instance * - * Locking Note: This function expects that the disc_mutex is locked - * before it is called. + * Locking Note: This function is called without disc mutex held, and + * should do all its processing with the mutex held */ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, void *disc_arg) @@ -695,11 +703,13 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, unsigned int len; int error; + mutex_lock(&disc->disc_mutex); FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n", fc_host_port_id(disc->lport->host)); if (IS_ERR(fp)) { fc_disc_error(disc, fp); + mutex_unlock(&disc->disc_mutex); return; } @@ -744,6 +754,8 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, disc->seq_count++; } fc_frame_free(fp); + + mutex_unlock(&disc->disc_mutex); } /** -- cgit v0.10.2 From 76f6804e7e7bb836cbdf4a73fe6c5485e4cc04c2 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Tue, 21 Apr 2009 16:26:58 -0700 Subject: [SCSI] libfc: Do not retry if the new state is not the same as old state For instance, if there is a Plogi pending (remote port is in Plogi state), and the state changes to say NONE (because the port is being logged off), then when the Plogi resp times out, do not start a retry. This patch partially reverts an earlier patch (libfc: check for err when recv and state is incorrect), by moving the state check back to before checking for error. However, if the state does not match, then there is an additional check to see if its an error ptr or a real frame before jumping to err or out respectively. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index b8178ef..52c4f2d 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1032,17 +1032,19 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RFT_ID response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_RFT_ID) { FC_DBG("Received a RFT_ID response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); @@ -1084,17 +1086,19 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RPN_ID response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_RPN_ID) { FC_DBG("Received a RPN_ID response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); if (fh && ct && fh->fh_type == FC_TYPE_CT && @@ -1134,17 +1138,19 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a SCR response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_SCR) { FC_DBG("Received a SCR response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_ready(lport); @@ -1360,17 +1366,19 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a LOGO response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_LOGO) { FC_DBG("Received a LOGO response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_reset(lport); @@ -1444,17 +1452,19 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a FLOGI response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_FLOGI) { FC_DBG("Received a FLOGI response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); did = ntoh24(fh->fh_d_id); if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) { diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 0472bb7..eef70b4 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -505,17 +505,19 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_PLOGI) { FC_DBG("Received a PLOGI response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC && (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { @@ -614,17 +616,19 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_PRLI) { FC_DBG("Received a PRLI response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { pp = fc_frame_payload_get(fp, sizeof(*pp)); @@ -678,17 +682,19 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_LOGO) { FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { fc_rport_enter_rtv(rport); @@ -764,17 +770,19 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_RTV) { FC_DBG("Received a RTV response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { struct fc_els_rtv_acc *rtv; -- cgit v0.10.2 From b4c6f54632ad664a3d9e7f05e4ea0f1803e32755 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Tue, 21 Apr 2009 16:27:04 -0700 Subject: [SCSI] libfc: Track rogue remote ports Rogue ports are currently not tracked on any list. The only reference to them is through any outstanding exchanges pending on the rogue ports. If the module is removed while a retry is set on a rogue port (say a Plogi retry for instance), this retry is not cancelled because there is no reference to the rogue port in the discovery rports list. Thus the local port can clean itself up, delete the exchange pool, and then the rogue port timeout can fire and try to start up another exchange. This patch tracks the rogue ports in a new list disc->rogue_rports. Creating a new list instead of using the disc->rports list keeps remote port code change to a minimum. 1) Whenever a rogue port is created, it is immediately added to the disc->rogue_rports list. 2) When the rogues port goes to ready, it is removed from the rogue list and the real remote port is added to the disc->rports list 3) The removal of the rogue from the disc->rogue_rports list is done in the context of the fc_rport_work() workQ thread in discovery callback. 4) Real rports are removed from the disc->rports list like before. Lookup is done only in the real rports list. This avoids making large changes to the remote port code. 5) In fc_disc_stop_rports, the rogues list is traversed in addition to the real list to stop the rogue ports and issue logoffs on them. This way, rogue ports get cleaned up when the local port goes away. 6) rogue remote ports are not removed from the list right away, but removed late in fc_rport_work() context, multiple threads can find the same remote port in the list and call rport_logoff(). Rport_logoff() only continues with the logoff if port is not in NONE state, thus preventing multiple logoffs and multiple list deletions. 7) Since the rport is removed from the disc list at a later stage (in the disc callback), incoming frames can find the rport even if rport_logoff() has been called on the rport. When rport_logoff() is called, the rport state is set to NONE, and we are trying to cancel all exchanges and retries on that port. While in this state, if an incoming Plogi/Prli/Logo or other frames match the rport, we should not reply because the rport is in the NONE state. Just drop the frame, since the rport will be deleted soon in the disc callback (fc_rport_work) 8) In fc_disc_single(), remove rport lookup and call to fc_disc_del_target. fc_disc_single() is called from recv_rscn_req() where rport lookup and rport_logoff is already done. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 4480630..4c88065 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -113,6 +113,11 @@ void fc_disc_stop_rports(struct fc_disc *disc) lport->tt.rport_logoff(rport); } + list_for_each_entry_safe(rdata, next, &disc->rogue_rports, peers) { + rport = PRIV_TO_RPORT(rdata); + lport->tt.rport_logoff(rport); + } + mutex_unlock(&disc->disc_mutex); } @@ -131,23 +136,32 @@ static void fc_disc_rport_callback(struct fc_lport *lport, { struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_disc *disc = &lport->disc; - int found = 0; FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event, rport->port_id); - if (event == RPORT_EV_CREATED) { + switch (event) { + case RPORT_EV_CREATED: if (disc) { - found = 1; mutex_lock(&disc->disc_mutex); list_add_tail(&rdata->peers, &disc->rports); mutex_unlock(&disc->disc_mutex); } + break; + case RPORT_EV_LOGO: + case RPORT_EV_FAILED: + case RPORT_EV_STOP: + mutex_lock(&disc->disc_mutex); + mutex_lock(&rdata->rp_mutex); + if (rdata->trans_state == FC_PORTSTATE_ROGUE) + list_del(&rdata->peers); + mutex_unlock(&rdata->rp_mutex); + mutex_unlock(&disc->disc_mutex); + break; + default: + break; } - if (!found) - FC_DEBUG_DISC("The rport (%6x) is not maintained " - "by the discovery layer\n", rport->port_id); } /** @@ -439,6 +453,7 @@ static int fc_disc_new_target(struct fc_disc *disc, rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; rdata->rp_state = RPORT_ST_INIT; + list_add_tail(&rdata->peers, &disc->rogue_rports); lport->tt.rport_login(rport); } } @@ -630,6 +645,8 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; rdata->local_port = lport; + list_add_tail(&rdata->peers, + &disc->rogue_rports); lport->tt.rport_login(rport); } else FC_DBG("Failed to allocate memory for " @@ -769,7 +786,6 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) { struct fc_lport *lport; - struct fc_rport *rport; struct fc_rport *new_rport; struct fc_rport_libfc_priv *rdata; @@ -778,15 +794,12 @@ static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) if (dp->ids.port_id == fc_host_port_id(lport->host)) goto out; - rport = lport->tt.rport_lookup(lport, dp->ids.port_id); - if (rport) - fc_disc_del_target(disc, rport); - new_rport = lport->tt.rport_create(dp); if (new_rport) { rdata = new_rport->dd_data; rdata->ops = &fc_disc_rport_ops; kfree(dp); + list_add_tail(&rdata->peers, &disc->rogue_rports); lport->tt.rport_login(new_rport); } return; @@ -848,6 +861,7 @@ int fc_disc_init(struct fc_lport *lport) INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout); mutex_init(&disc->disc_mutex); INIT_LIST_HEAD(&disc->rports); + INIT_LIST_HEAD(&disc->rogue_rports); disc->lport = lport; disc->delay = FC_DISC_DELAY; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index eef70b4..5bf7a94 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -267,6 +267,10 @@ static void fc_rport_work(struct work_struct *work) "(%6x).\n", ids.port_id); event = RPORT_EV_FAILED; } + if (rport->port_id != FC_FID_DIR_SERV) + if (rport_ops->event_callback) + rport_ops->event_callback(lport, rport, + RPORT_EV_FAILED); put_device(&rport->dev); rport = new_rport; rdata = new_rport->dd_data; @@ -325,11 +329,20 @@ int fc_rport_login(struct fc_rport *rport) int fc_rport_logoff(struct fc_rport *rport) { struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; mutex_lock(&rdata->rp_mutex); FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id); + if (rdata->rp_state == RPORT_ST_NONE) { + FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state," + " not removing", fc_host_port_id(lport->host), + rport->port_id); + mutex_unlock(&rdata->rp_mutex); + goto out; + } + fc_rport_enter_logo(rport); /* @@ -349,6 +362,7 @@ int fc_rport_logoff(struct fc_rport *rport) mutex_unlock(&rdata->rp_mutex); +out: return 0; } @@ -1015,6 +1029,8 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport, default: FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected " "state %d\n", sid, rdata->rp_state); + fc_frame_free(fp); + return; break; } @@ -1106,6 +1122,8 @@ static void fc_rport_recv_prli_req(struct fc_rport *rport, reason = ELS_RJT_NONE; break; default: + fc_frame_free(rx_fp); + return; break; } len = fr_len(rx_fp) - sizeof(*fh); @@ -1235,6 +1253,11 @@ static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp, "while in state %s\n", ntoh24(fh->fh_s_id), fc_rport_state(rport)); + if (rdata->rp_state == RPORT_ST_NONE) { + fc_frame_free(fp); + return; + } + rjt_data.fp = NULL; rjt_data.reason = ELS_RJT_UNAB; rjt_data.explan = ELS_EXPL_NONE; @@ -1264,6 +1287,11 @@ static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp, "while in state %s\n", ntoh24(fh->fh_s_id), fc_rport_state(rport)); + if (rdata->rp_state == RPORT_ST_NONE) { + fc_frame_free(fp); + return; + } + rdata->event = RPORT_EV_LOGO; queue_work(rport_event_queue, &rdata->event_work); diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 0303a6a..45f9cc6 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -637,6 +637,7 @@ struct fc_disc { enum fc_disc_event); struct list_head rports; + struct list_head rogue_rports; struct fc_lport *lport; struct mutex disc_mutex; struct fc_gpn_ft_resp partial_buf; /* partial name buffer */ -- cgit v0.10.2 From a0fd2e49ec75bf74d3d202df51dfe65ad4c32605 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Tue, 21 Apr 2009 16:27:09 -0700 Subject: [SCSI] libfc: During fabric logoff, flush the rport Q after logging off dns port We want to generate the rport queue event (from the logoff) before flushing the queue otherwise the event may still be in the queue when we logoff. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 52c4f2d..4cd9533 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -618,6 +618,11 @@ int fc_fabric_logoff(struct fc_lport *lport) { lport->tt.disc_stop_final(lport); mutex_lock(&lport->lp_mutex); + if (lport->dns_rp) + lport->tt.rport_logoff(lport->dns_rp); + mutex_unlock(&lport->lp_mutex); + lport->tt.rport_flush_queue(); + mutex_lock(&lport->lp_mutex); fc_lport_enter_logo(lport); mutex_unlock(&lport->lp_mutex); cancel_delayed_work_sync(&lport->retry_work); @@ -1408,10 +1413,6 @@ static void fc_lport_enter_logo(struct fc_lport *lport) fc_lport_state_enter(lport, LPORT_ST_LOGO); - /* DNS session should be closed so we can release it here */ - if (lport->dns_rp) - lport->tt.rport_logoff(lport->dns_rp); - fp = fc_frame_alloc(lport, sizeof(*logo)); if (!fp) { fc_lport_error(lport, fp); -- cgit v0.10.2 From bbf156697a6332f9074e2b275a9157d99a431398 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Tue, 21 Apr 2009 16:27:14 -0700 Subject: [SCSI] libfc: Change state to NONE in fc_lport_destroy After lport_destroy, the local port should not be used again. Transition to state NONE, any incoming frames or link up should not transition out of this state since we are deleting exchange table and cleaning up the local port. Also, mark link as down. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 4cd9533..e0c2477 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -644,7 +644,12 @@ EXPORT_SYMBOL(fc_fabric_logoff); */ int fc_lport_destroy(struct fc_lport *lport) { + mutex_lock(&lport->lp_mutex); + lport->state = LPORT_ST_NONE; + lport->link_up = 0; lport->tt.frame_send = fc_frame_drop; + mutex_unlock(&lport->lp_mutex); + lport->tt.fcp_abort_io(lport); lport->tt.exch_mgr_reset(lport, 0, 0); return 0; -- cgit v0.10.2 From 55c7a60cf0c9113cb52d2b87abb120e951bdb332 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Tue, 21 Apr 2009 16:27:19 -0700 Subject: [SCSI] libfc: whenever queueing delete ev for rport, set state to NONE When a delete event is queued for an rport, set state to NONE so that no other processing is done on the rport as it is being removed. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 5bf7a94..e675f5a 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -444,6 +444,7 @@ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) case RPORT_ST_PRLI: case RPORT_ST_LOGO: rdata->event = RPORT_EV_FAILED; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); break; @@ -664,6 +665,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, } else { FC_DBG("Bad ELS response\n"); rdata->event = RPORT_EV_FAILED; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); } @@ -715,6 +717,7 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, } else { FC_DBG("Bad ELS response\n"); rdata->event = RPORT_EV_LOGO; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); } @@ -1293,6 +1296,7 @@ static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp, } rdata->event = RPORT_EV_LOGO; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); -- cgit v0.10.2 From 3caf02ee280a171074476d346d01dc0f5e05b22c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Apr 2009 16:27:25 -0700 Subject: [SCSI] fcoe: kfree() -> kfree_skb() sk_buff pointers should use kfree_skb() instead of vanilla kfree(). Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 94e1e31..13a0a6f 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1011,7 +1011,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) wlen = skb->len / FCOE_WORD_TO_BYTE; if (!lp->link_up) { - kfree(skb); + kfree_skb(skb); return 0; } -- cgit v0.10.2 From fc224a5bc949aa30df572e990201c8f95767658f Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Tue, 21 Apr 2009 16:27:30 -0700 Subject: [SCSI] fcoe: don't export functions that are internal to fcoe These probably never should have been exported. If they were needed outside of the fcoe module, they would have been moved to libfcoe. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 13a0a6f..7bd0e82 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -884,7 +884,6 @@ err2: kfree_skb(skb); return -1; } -EXPORT_SYMBOL_GPL(fcoe_rcv); /** * fcoe_start_io() - pass to netdev to start xmit for fcoe @@ -1123,7 +1122,6 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) return 0; } -EXPORT_SYMBOL_GPL(fcoe_xmit); /** * fcoe_percpu_receive_thread() - recv thread per cpu @@ -1652,7 +1650,6 @@ int fcoe_link_ok(struct fc_lport *lp) return rc; } -EXPORT_SYMBOL_GPL(fcoe_link_ok); /** * fcoe_percpu_clean() - Clear the pending skbs for an lport @@ -1684,7 +1681,6 @@ void fcoe_percpu_clean(struct fc_lport *lp) spin_unlock_bh(&pp->fcoe_rx_list.lock); } } -EXPORT_SYMBOL_GPL(fcoe_percpu_clean); /** * fcoe_clean_pending_queue() - Dequeue a skb and free it @@ -1705,7 +1701,6 @@ void fcoe_clean_pending_queue(struct fc_lport *lp) } spin_unlock_bh(&fc->fcoe_pending_queue.lock); } -EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue); /** * fcoe_reset() - Resets the fcoe @@ -1719,7 +1714,6 @@ int fcoe_reset(struct Scsi_Host *shost) fc_lport_reset(lport); return 0; } -EXPORT_SYMBOL_GPL(fcoe_reset); /** * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device @@ -1757,7 +1751,6 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev) return (fc) ? fc->ctlr.lp : NULL; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup); /** * fcoe_hostlist_add() - Add a lport to lports list @@ -1778,7 +1771,6 @@ int fcoe_hostlist_add(const struct fc_lport *lp) } return 0; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_add); /** * fcoe_hostlist_remove() - remove a lport from lports list @@ -1798,7 +1790,6 @@ int fcoe_hostlist_remove(const struct fc_lport *lp) return 0; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_remove); /** * fcoe_init() - fcoe module loading initialization -- cgit v0.10.2 From dd3fd72e692c8af007f70df4433c0cffe8582d8b Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Tue, 21 Apr 2009 16:27:36 -0700 Subject: [SCSI] fcoe: fix spelling typos and bad comments Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 7bd0e82..8ad1265 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -57,7 +57,7 @@ DEFINE_RWLOCK(fcoe_hostlist_lock); DEFINE_TIMER(fcoe_timer, NULL, 0, 0); DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu); -/* Function Prototyes */ +/* Function Prototypes */ static int fcoe_reset(struct Scsi_Host *shost); static int fcoe_xmit(struct fc_lport *, struct fc_frame *); static int fcoe_rcv(struct sk_buff *, struct net_device *, @@ -138,7 +138,6 @@ static struct scsi_host_template fcoe_shost_template = { /** * fcoe_lport_config() - sets up the fc_lport * @lp: ptr to the fc_lport - * @shost: ptr to the parent scsi host * * Returns: 0 for success */ @@ -380,7 +379,7 @@ static int fcoe_if_destroy(struct net_device *netdev) dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0); rtnl_unlock(); - /* Free the per-CPU revieve threads */ + /* Free the per-CPU receive threads */ fcoe_percpu_clean(lp); /* Free existing skbs */ @@ -720,7 +719,7 @@ static void fcoe_percpu_thread_destroy(unsigned int cpu) } #else /* - * This a non-SMP scenario where the singluar Rx thread is + * This a non-SMP scenario where the singular Rx thread is * being removed. Free all skbs and stop the thread. */ spin_lock_bh(&p->fcoe_rx_list.lock); @@ -777,7 +776,7 @@ static struct notifier_block fcoe_cpu_notifier = { * @skb: the receive skb * @dev: associated net device * @ptype: context - * @odldev: last device + * @olddev: last device * * this function will receive the packet and build fc frame and pass it up * @@ -904,7 +903,7 @@ static inline int fcoe_start_io(struct sk_buff *skb) } /** - * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof + * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof * @skb: the skb to be xmitted * @tlen: total len * @@ -946,7 +945,7 @@ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen) /** * fcoe_fc_crc() - calculates FC CRC in this fcoe skb - * @fp: the fc_frame containg data to be checksummed + * @fp: the fc_frame containing data to be checksummed * * This uses crc32() to calculate the crc for fc frame * Return : 32 bit crc @@ -1061,7 +1060,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) cp = NULL; } - /* adjust skb netowrk/transport offsets to match mac/fcoe/fc */ + /* adjust skb network/transport offsets to match mac/fcoe/fc */ skb_push(skb, elen + hlen); skb_reset_mac_header(skb); skb_reset_network_header(skb); @@ -1294,17 +1293,16 @@ void fcoe_watchdog(ulong vp) /** - * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue - * @lp: the fc_port for this skb - * @skb: the associated skb to be xmitted + * fcoe_check_wait_queue() - attempt to clear the transmit backlog + * @lp: the fc_lport * * This empties the wait_queue, dequeue the head of the wait_queue queue * and calls fcoe_start_io() for each packet, if all skb have been * transmitted, return qlen or -1 if a error occurs, then restore - * wait_queue and try again later. + * wait_queue and try again later. * * The wait_queue is used when the skb transmit fails. skb will go - * in the wait_queue which will be emptied by the time function OR + * in the wait_queue which will be emptied by the timer function or * by the next skb transmit. * * Returns: 0 for success @@ -1353,10 +1351,6 @@ out: */ static void fcoe_dev_setup() { - /* - * here setup a interface specific wd time to - * monitor the link state - */ register_netdevice_notifier(&fcoe_notifier); } @@ -1435,10 +1429,9 @@ out: /** * fcoe_if_to_netdev() - parse a name buffer to get netdev - * @ifname: fixed array for output parsed ifname * @buffer: incoming buffer to be copied * - * Returns: NULL or ptr to netdeive + * Returns: NULL or ptr to net_device */ static struct net_device *fcoe_if_to_netdev(const char *buffer) { @@ -1456,7 +1449,7 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) } /** - * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev + * fcoe_netdev_to_module_owner() - finds out the driver module of the netdev * @netdev: the target netdev * * Returns: ptr to the struct module, NULL for failure @@ -1486,7 +1479,7 @@ fcoe_netdev_to_module_owner(const struct net_device *netdev) * Holds the Ethernet driver module by try_module_get() for * the corresponding netdev. * - * Returns: 0 for succsss + * Returns: 0 for success */ static int fcoe_ethdrv_get(const struct net_device *netdev) { @@ -1508,7 +1501,7 @@ static int fcoe_ethdrv_get(const struct net_device *netdev) * Releases the Ethernet driver module by module_put for * the corresponding netdev. * - * Returns: 0 for succsss + * Returns: 0 for success */ static int fcoe_ethdrv_put(const struct net_device *netdev) { @@ -1526,7 +1519,7 @@ static int fcoe_ethdrv_put(const struct net_device *netdev) /** * fcoe_destroy() - handles the destroy from sysfs - * @buffer: expcted to be a eth if name + * @buffer: expected to be an eth if name * @kp: associated kernel param * * Returns: 0 for success @@ -1563,7 +1556,7 @@ out_nodev: /** * fcoe_create() - Handles the create call from sysfs - * @buffer: expcted to be a eth if name + * @buffer: expected to be an eth if name * @kp: associated kernel param * * Returns: 0 for success @@ -1717,7 +1710,7 @@ int fcoe_reset(struct Scsi_Host *shost) /** * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device - * @device: this is currently ptr to net_device + * @dev: this is currently ptr to net_device * * Returns: NULL or the located fcoe_softc */ @@ -1754,7 +1747,7 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev) /** * fcoe_hostlist_add() - Add a lport to lports list - * @lp: ptr to the fc_lport to badded + * @lp: ptr to the fc_lport to be added * * Returns: 0 for success */ @@ -1774,7 +1767,7 @@ int fcoe_hostlist_add(const struct fc_lport *lp) /** * fcoe_hostlist_remove() - remove a lport from lports list - * @lp: ptr to the fc_lport to badded + * @lp: ptr to the fc_lport to be removed * * Returns: 0 for success */ diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index f410f4a..62ba0f3 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -122,7 +122,7 @@ static void fcoe_ctlr_reset_fcfs(struct fcoe_ctlr *fip) } /** - * fcoe_ctrl_destroy() - Disable and tear-down the FCoE controller. + * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller. * @fip: FCoE controller. * * This is called by FCoE drivers before freeing the &fcoe_ctlr. -- cgit v0.10.2 From a29e7646f42a325a7f6cce34adbeb52e8db15566 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Tue, 21 Apr 2009 16:27:41 -0700 Subject: [SCSI] libfc: Fix compilation warnings with allmodconfig When building with a .config generated from 'make allmodconfig' some build warnings are generated. This patch corrects the warnings, adds a FC_FID_NONE (= 0) enumeration for FC-IDs and cleans up one variable naming to meet our variable naming conventions. For example, fc_lport's should be named "lport," not "lp." Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c index dd47fe6..5878b34 100644 --- a/drivers/scsi/libfc/fc_elsct.c +++ b/drivers/scsi/libfc/fc_elsct.c @@ -41,7 +41,7 @@ static struct fc_seq *fc_elsct_send(struct fc_lport *lport, void *arg, u32 timer_msec) { enum fc_rctl r_ctl; - u32 did; + u32 did = FC_FID_NONE; enum fc_fh_type fh_type; int rc; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index f555ae9..521f996 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -713,7 +713,7 @@ done: static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) { struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; - struct fc_lport *lp; + struct fc_lport *lport = fsp->lp; struct fc_frame_header *fh; struct fcp_txrdy *dd; u8 r_ctl; @@ -724,9 +724,8 @@ static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) fh = fc_frame_header_get(fp); r_ctl = fh->fh_r_ctl; - lp = fsp->lp; - if (!(lp->state & LPORT_ST_READY)) + if (!(lport->state & LPORT_ST_READY)) goto out; if (fc_fcp_lock_pkt(fsp)) goto out; @@ -779,7 +778,7 @@ errout: if (IS_ERR(fp)) fc_fcp_error(fsp, fp); else if (rc == -ENOMEM) - fc_fcp_reduce_can_queue(lp); + fc_fcp_reduce_can_queue(lport); } static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index e675f5a..747d73c 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -509,7 +509,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, struct fc_rport *rport = rp_arg; struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_lport *lport = rdata->local_port; - struct fc_els_flogi *plp; + struct fc_els_flogi *plp = NULL; unsigned int tov; u16 csp_seq; u16 cssp_seq; diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h index 1b7af3a..ac4cd38 100644 --- a/include/scsi/fc/fc_fs.h +++ b/include/scsi/fc/fc_fs.h @@ -149,6 +149,7 @@ enum fc_rctl { * Well-known fabric addresses. */ enum fc_well_known_fid { + FC_FID_NONE = 0x000000, /* No destination */ FC_FID_BCAST = 0xffffff, /* broadcast */ FC_FID_FLOGI = 0xfffffe, /* fabric login */ FC_FID_FCTRL = 0xfffffd, /* fabric controller */ -- cgit v0.10.2 From 6401bdcad536cc00589c38e7e1c140d3acc00087 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Tue, 21 Apr 2009 16:27:46 -0700 Subject: [SCSI] fcoe: fip: add multicast filter to receive FIP advertisements. The FCoE forwarder (FCF) would be selected, but then would soon time out after three advertisements were missed. This would be 24 seconds by default, or 3 times the keep-alive interval configured on the switch. The cause was that the multicast address for all FIP E-nodes was never added. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 8ad1265..03e1926 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -255,6 +255,7 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev) rtnl_lock(); memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN); dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN); + dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0); rtnl_unlock(); /* -- cgit v0.10.2 From dd406ef8950e76b17d74c5764a1e3d3a87d4a855 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 22 Apr 2009 08:58:02 -0500 Subject: [SCSI] ipr: Fix sleeping function called with interrupts disabled The ata_sas_slave_configure was changed such that it now allocates some memory for a drain buffer for ATAPI devices. Fixup the ipr driver such that we no longer make this call with interrupts disabled. Signed-off-by: Brian King Signed-off-by: James Bottomley diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index c09d775..dd689de 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -3654,6 +3654,7 @@ static int ipr_slave_configure(struct scsi_device *sdev) { struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; struct ipr_resource_entry *res; + struct ata_port *ap = NULL; unsigned long lock_flags = 0; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); @@ -3672,12 +3673,16 @@ static int ipr_slave_configure(struct scsi_device *sdev) } if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res)) sdev->allow_restart = 1; - if (ipr_is_gata(res) && res->sata_port) { + if (ipr_is_gata(res) && res->sata_port) + ap = res->sata_port->ap; + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + + if (ap) { scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN); - ata_sas_slave_configure(sdev, res->sata_port->ap); - } else { + ata_sas_slave_configure(sdev, ap); + } else scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); - } + return 0; } spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); return 0; -- cgit v0.10.2 From 8f76d151b010980d137bfdc736d1d8f64b489165 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Tue, 21 Apr 2009 16:43:27 -0700 Subject: [SCSI] fix sign extension with 1.5TB usb-storage LBD=y Shifting an unsigned char implicitly casts it to a signed int. This caused 'lba' to sign-extend and Linux would then try READ CAPACITY 16 which was not supported by at least one drive. Using the get_unaligned_be*() helpers keeps us from having to worry about how the extension might occur. Signed-off-by: Dave Hansen Reviewed-by: Matthew Wilcox Signed-off-by: James Bottomley diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 3fcb64b..8404423 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -50,6 +50,7 @@ #include #include #include +#include #include #include @@ -1344,12 +1345,8 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, return -EINVAL; } - sector_size = (buffer[8] << 24) | (buffer[9] << 16) | - (buffer[10] << 8) | buffer[11]; - lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) | - ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) | - ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) | - ((u64)buffer[6] << 8) | (u64)buffer[7]); + sector_size = get_unaligned_be32(&buffer[8]); + lba = get_unaligned_be64(&buffer[0]); sd_read_protection_type(sdkp, buffer); @@ -1400,10 +1397,8 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, return -EINVAL; } - sector_size = (buffer[4] << 24) | (buffer[5] << 16) | - (buffer[6] << 8) | buffer[7]; - lba = (buffer[0] << 24) | (buffer[1] << 16) | - (buffer[2] << 8) | buffer[3]; + sector_size = get_unaligned_be32(&buffer[4]); + lba = get_unaligned_be32(&buffer[0]); if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) { sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " -- cgit v0.10.2 From fd01825c70006638dee16f48c810c20c54f6cd15 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:37:20 -0600 Subject: [SCSI] mpt2sas : unique ioctl magic number The current magic number is shared with mptsas driver. This to be unique to fix issues with register_ioctls32_conversion in older kernels. We are making this change across all versions of the sas2.0 drivers. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h index dbb6c0c..5bd7d4c 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h @@ -50,7 +50,7 @@ #endif #define MPT2SAS_DEV_NAME "mpt2ctl" -#define MPT2_MAGIC_NUMBER 'm' +#define MPT2_MAGIC_NUMBER 'L' #define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ /** -- cgit v0.10.2 From 03ea1115506c53b46cec2177deb189d186bb80dd Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:37:57 -0600 Subject: [SCSI] mpt2sas : the sanity check in base_interrupt needs to be on dword boundary The poison sanity check on the reply_post_free register needs to be by 32bit, not 64bit. The poison check is there because its possible that the driver read the 1st 32bit before the 2nd 32bit has been written to by firmware. In other words, this handles race between driver reading the 64 bit register, and it being dma'd across pci memory from controller firmware as two 32bit pci writes. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index a91f514..12ecffbf 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -636,6 +636,14 @@ _base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc) static irqreturn_t _base_interrupt(int irq, void *bus_id) { + union reply_descriptor { + u64 word; + struct { + u32 low; + u32 high; + } u; + }; + union reply_descriptor rd; u32 post_index, post_index_next, completed_cmds; u8 request_desript_type; u16 smid; @@ -656,7 +664,8 @@ _base_interrupt(int irq, void *bus_id) completed_cmds = 0; do { - if (ioc->reply_post_free[post_index].Words == ~0ULL) + rd.word = ioc->reply_post_free[post_index].Words; + if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) goto out; reply = 0; cb_idx = 0xFF; @@ -721,7 +730,7 @@ _base_interrupt(int irq, void *bus_id) for (i = 0 ; i < completed_cmds; i++) { post_index = post_index_next; /* poison the reply post descriptor */ - ioc->reply_post_free[post_index_next].Words = ~0ULL; + ioc->reply_post_free[post_index_next].Words = ULLONG_MAX; post_index_next = (post_index == (ioc->reply_post_queue_depth - 1)) ? 0 : post_index + 1; @@ -3068,7 +3077,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, /* initialize Reply Post Free Queue */ for (i = 0; i < ioc->reply_post_queue_depth; i++) - ioc->reply_post_free[i].Words = ~0ULL; + ioc->reply_post_free[i].Words = ULLONG_MAX; r = _base_send_ioc_init(ioc, VF_ID, sleep_flag); if (r) -- cgit v0.10.2 From 0d04df9b4a83c50ebe2143f20c2d5469c83ba314 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:38:43 -0600 Subject: [SCSI] mpt2sas : fix oops when firmware sends large sense buffer size There is a bug in firmware where the reply message frame says there is a 16kb sense buffer, when in reality its only 20 bytes. This fix insures the memcpy action doesn't corrupte the memory beyond the 90 bytes allocated in the scsi command for sense buffer. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 0c463c4..f2d967c 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2863,8 +2863,9 @@ scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) struct sense_info data; const void *sense_data = mpt2sas_base_get_sense_buffer(ioc, smid); - memcpy(scmd->sense_buffer, sense_data, + u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, le32_to_cpu(mpi_reply->SenseCount)); + memcpy(scmd->sense_buffer, sense_data, sz); _scsih_normalize_sense(scmd->sense_buffer, &data); /* failure prediction threshold exceeded */ if (data.asc == 0x5D) -- cgit v0.10.2 From 77bdd9ee1e1d94fa853c354dcde881ddc5d277a5 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:39:24 -0600 Subject: [SCSI] mpt2sas : running out of message frames The driver is not freeing message frame when returning failure from _ctl_do_task_abort. If you call this function 500 times when its unable to find an active task mid, you end up with no message frames. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 2d4f85c..e0eab0a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -714,8 +714,10 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { - if (_ctl_do_task_abort(ioc, &karg, tm_request)) + if (_ctl_do_task_abort(ioc, &karg, tm_request)) { + mpt2sas_base_free_smid(ioc, smid); goto out; + } } mutex_lock(&ioc->tm_cmds.mutex); -- cgit v0.10.2 From e5f9bb198aa47d06553b66cc5f24ded49ed0b70d Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:40:01 -0600 Subject: [SCSI] mpt2sas : driver name needs to be in the MPT2IOCINFO ioctl The driver name needs to be at the beginining of the driver_version string in MPT2IOCINFO ioctl. This is the same behaviour is there already in the mptsas driver. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index e0eab0a..2dc3859 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -917,9 +917,9 @@ _ctl_getiocinfo(void __user *arg) karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn); karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus); karg.firmware_version = ioc->facts.FWVersion.Word; - strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION, - MPT2_IOCTL_VERSION_LENGTH); - karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0'; + strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME); + strcat(karg.driver_version, "-"); + strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION); karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); if (copy_to_user(arg, &karg, sizeof(karg))) { -- cgit v0.10.2 From f0f9cc1fb8a21f3ff90900505fc82a43d29d0975 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:40:48 -0600 Subject: [SCSI] mpt2sas : Identify Dell series-7 adapters at driver load time The Dell branding along with the VID, DID, SSVID, SSDID following the LSI branding that contains the card firmware/chip/bios versions. If the SSDID is not known but it is a Dell HBA, the driver will print the SSDID instead of the Dell branding string. Nothing will be printed for non Dell HBAs Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 12ecffbf..f3da592 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -1396,6 +1396,64 @@ mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, } /** + * _base_display_dell_branding - Disply branding string + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc) +{ + char dell_branding[MPT2SAS_DELL_BRANDING_SIZE]; + + if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL) + return; + + memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE); + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_6GBPS_SAS_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + default: + sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device); + break; + } + + printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X)," + " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding, + ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor, + ioc->pdev->subsystem_device); +} + +/** * _base_display_ioc_capabilities - Disply IOC's capabilities. * @ioc: per adapter object * @@ -1436,6 +1494,8 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) i++; } + _base_display_dell_branding(ioc); + i = 0; printk("), "); printk("Capabilities=("); diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 6945ff4..b39a5d6 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -130,6 +130,30 @@ #define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT /* + * Dell HBA branding + */ +#define MPT2SAS_DELL_BRANDING_SIZE 32 + +#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA" +#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter" +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated" +#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular" +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded" +#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200" +#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS" + +/* + * Dell HBA SSDIDs + */ +#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C +#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E +#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20 +#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21 +#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22 + +/* * per target private data */ #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 -- cgit v0.10.2 From 8901cbb45e2a6657adf0e6eea4276ef452dee011 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:41:32 -0600 Subject: [SCSI] mpt2sas : Broadcast Primative AEN bug fix Bug fix in the broadcast primative async event code where the driver would stop sending tm queries after the first queury was completed. This was due driver not reseting the tm_cmds.status field back to MPT2_CMD_NOT_USED after completing a task management request. An addtional fix adding sanity check to insure sas_device->starget set to NULL. During multipath testing fail over/fail back, the mid layer was holding onto sdev longer than the fail back period, thus starget was getting set to NULL for device being added. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index f2d967c..4dffbec 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -516,12 +516,8 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc, handle = sas_device->handle; parent_handle = sas_device->parent_handle; sas_address = sas_device->sas_address; - if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) _scsih_sas_device_remove(ioc, sas_device); - } else if (!sas_device->starget) { - mpt2sas_transport_port_remove(ioc, sas_address, parent_handle); - _scsih_sas_device_remove(ioc, sas_device); - } } /** @@ -1203,7 +1199,9 @@ scsih_target_destroy(struct scsi_target *starget) rphy = dev_to_rphy(starget->dev.parent); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, rphy->identify.sas_address); - if (sas_device) + if (sas_device && (sas_device->starget == starget) && + (sas_device->id == starget->id) && + (sas_device->channel == starget->channel)) sas_device->starget = NULL; spin_unlock_irqrestore(&ioc->sas_device_lock, flags); @@ -3924,7 +3922,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, mpt2sas_scsih_issue_tm(ioc, handle, lun, MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30); - termination_count += le32_to_cpu(mpi_reply->TerminationCount); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) && (mpi_reply->ResponseCode == @@ -3934,10 +3932,10 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, continue; mpt2sas_scsih_issue_tm(ioc, handle, lun, - MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30); + MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; termination_count += le32_to_cpu(mpi_reply->TerminationCount); } - ioc->tm_cmds.status = MPT2_CMD_NOT_USED; ioc->broadcast_aen_busy = 0; mutex_unlock(&ioc->tm_cmds.mutex); -- cgit v0.10.2 From 99bb214b1b652c475bb3d79cede47ecb76b758fa Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:42:13 -0600 Subject: [SCSI] mpt2sas : release diagnotic buffers prior host reset Diagnostic buffer support is already there in the driver. This support allows applications to pull ring buffers from controller firmware for debugging firmware related issues. What this patch does is sends reqeust to firmware to release the buffers prior to host reset. This will allow what ever debug info is there prior to reset to be dma'd to host memory. With out this fix, some of the debug data would been lost. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 2dc3859..ba6ab17 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -64,6 +64,9 @@ static struct fasync_struct *async_queue; static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait); +static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, + u8 *issue_reset); + /** * enum block_state - blocking state * @NON_BLOCKING: non blocking @@ -378,10 +381,22 @@ _ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp) void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) { + int i; + u8 issue_reset; + switch (reset_phase) { case MPT2_IOC_PRE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_RELEASED)) + continue; + _ctl_send_release(ioc, i, &issue_reset); + } break; case MPT2_IOC_AFTER_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " @@ -395,6 +410,17 @@ mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) case MPT2_IOC_DONE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_RELEASED)) + continue; + ioc->diag_buffer_status[i] |= + MPT2_DIAG_BUFFER_IS_DIAG_RESET; + } break; } } @@ -1553,81 +1579,38 @@ _ctl_diag_query(void __user *arg) } /** - * _ctl_diag_release - request to send Diag Release Message to firmware - * @arg - user space buffer containing ioctl content - * @state - NON_BLOCKING or BLOCKING + * _ctl_send_release - Diag Release Message + * @ioc: per adapter object + * @buffer_type - specifies either TRACE or SNAPSHOT + * @issue_reset - specifies whether host reset is required. * - * This allows ownership of the specified buffer to returned to the driver, - * allowing an application to read the buffer without fear that firmware is - * overwritting information in the buffer. */ -static long -_ctl_diag_release(void __user *arg, enum block_state state) +static int +_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset) { - struct mpt2_diag_release karg; - struct MPT2SAS_ADAPTER *ioc; - void *request_data; - int rc; Mpi2DiagReleaseRequest_t *mpi_request; Mpi2DiagReleaseReply_t *mpi_reply; - u8 buffer_type; - unsigned long timeleft; u16 smid; u16 ioc_status; - u8 issue_reset = 0; - - if (copy_from_user(&karg, arg, sizeof(karg))) { - printk(KERN_ERR "failure at %s:%d/%s()!\n", - __FILE__, __LINE__, __func__); - return -EFAULT; - } - if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) - return -ENODEV; + u32 ioc_state; + int rc; + unsigned long timeleft; dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, __func__)); - buffer_type = karg.unique_id & 0x000000ff; - if (!_ctl_diag_capability(ioc, buffer_type)) { - printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " - "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); - return -EPERM; - } - - if ((ioc->diag_buffer_status[buffer_type] & - MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { - printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " - "registered\n", ioc->name, __func__, buffer_type); - return -EINVAL; - } - - if (karg.unique_id != ioc->unique_id[buffer_type]) { - printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " - "registered\n", ioc->name, __func__, karg.unique_id); - return -EINVAL; - } - - if (ioc->diag_buffer_status[buffer_type] & - MPT2_DIAG_BUFFER_IS_RELEASED) { - printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " - "is already released\n", ioc->name, __func__, - buffer_type); - return 0; - } - - request_data = ioc->diag_buffer[buffer_type]; + rc = 0; + *issue_reset = 0; - if (!request_data) { - printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " - "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); - return -ENOMEM; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "skipping due to FAULT state\n", ioc->name, + __func__)); + rc = -EAGAIN; + goto out; } - if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) - return -EAGAIN; - else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) - return -ERESTARTSYS; - if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", ioc->name, __func__); @@ -1643,7 +1626,6 @@ _ctl_diag_release(void __user *arg, enum block_state state) goto out; } - rc = 0; ioc->ctl_cmds.status = MPT2_CMD_PENDING; memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); @@ -1662,8 +1644,9 @@ _ctl_diag_release(void __user *arg, enum block_state state) _debug_dump_mf(mpi_request, sizeof(Mpi2DiagReleaseRequest_t)/4); if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) - issue_reset = 1; - goto issue_host_reset; + *issue_reset = 1; + rc = -EFAULT; + goto out; } /* process the completed Reply Message Frame */ @@ -1689,14 +1672,101 @@ _ctl_diag_release(void __user *arg, enum block_state state) rc = -EFAULT; } - issue_host_reset: + out: + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + return rc; +} + +/** + * _ctl_diag_release - request to send Diag Release Message to firmware + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +static long +_ctl_diag_release(void __user *arg, enum block_state state) +{ + struct mpt2_diag_release karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + int rc; + u8 buffer_type; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "is already released\n", ioc->name, __func__, + buffer_type); + return 0; + } + + request_data = ioc->diag_buffer[buffer_type]; + + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + /* buffers were released by due to host reset */ + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_DIAG_RESET)) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_RELEASED; + ioc->diag_buffer_status[buffer_type] &= + ~MPT2_DIAG_BUFFER_IS_DIAG_RESET; + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "was released due to host reset\n", ioc->name, __func__, + buffer_type); + return 0; + } + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + rc = _ctl_send_release(ioc, buffer_type, &issue_reset); + if (issue_reset) mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); - out: - - ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; mutex_unlock(&ioc->ctl_cmds.mutex); return rc; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h index 5bd7d4c..4da1143 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h @@ -295,8 +295,9 @@ struct mpt2_ioctl_btdh_mapping { /* status bits for ioc->diag_buffer_status */ -#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) -#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) +#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) +#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) +#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04) /* application flags for mpt2_diag_register, mpt2_diag_query */ #define MPT2_APP_FLAGS_APP_OWNED (0x0001) -- cgit v0.10.2 From 6f92a7a0aff413cdf42955a187647e3736ebd8f3 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:43:33 -0600 Subject: [SCSI] mpt2sas: fix hotplug event processing Here's a fix for hotplug events. The useage of queue_delayed_work seems to broke the fifo for processing of firmware events. After several iterations of adding and removing cabling connected to jbods, the devices are not getting added becuase kernel thread is activited out of order. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 4dffbec..e3a7967 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -119,7 +119,7 @@ struct sense_info { */ struct fw_event_work { struct list_head list; - struct delayed_work work; + struct work_struct work; struct MPT2SAS_ADAPTER *ioc; u8 VF_ID; u8 host_reset_handling; @@ -2007,8 +2007,8 @@ _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) spin_lock_irqsave(&ioc->fw_event_lock, flags); list_add_tail(&fw_event->list, &ioc->fw_event_list); - INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work); - queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1); + INIT_WORK(&fw_event->work, _firmware_event_work); + queue_work(ioc->firmware_event_thread, &fw_event->work); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } @@ -2052,7 +2052,7 @@ _scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work return; spin_lock_irqsave(&ioc->fw_event_lock, flags); - queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay); + queue_work(ioc->firmware_event_thread, &fw_event->work); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } @@ -4961,7 +4961,7 @@ static void _firmware_event_work(struct work_struct *work) { struct fw_event_work *fw_event = container_of(work, - struct fw_event_work, work.work); + struct fw_event_work, work); unsigned long flags; struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; -- cgit v0.10.2 From 3b8b5c9b1f08660583e5dfe095c24170df62f1d2 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Tue, 21 Apr 2009 15:44:27 -0600 Subject: [SCSI] mpt2sas : bump driver version to 01.100.02.00 Bump driver version. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index b39a5d6..babd4cc 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -68,11 +68,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "00.100.11.16" +#define MPT2SAS_DRIVER_VERSION "01.100.02.00" #define MPT2SAS_MAJOR_VERSION 00 #define MPT2SAS_MINOR_VERSION 100 -#define MPT2SAS_BUILD_VERSION 11 -#define MPT2SAS_RELEASE_VERSION 16 +#define MPT2SAS_BUILD_VERSION 02 +#define MPT2SAS_RELEASE_VERSION 00 /* * Set MPT2SAS_SG_DEPTH value based on user input. -- cgit v0.10.2 From bf5e84f69618f416e89a5a53434a8c865e70252e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 19 Apr 2009 19:07:47 +0300 Subject: [SCSI] libosd: fix potential ERR_PTR dereference in osd_initiator.c bio_map_kern() returns an ERR_PTR() not NULL. Found by smatch (http://repo.or.cz/w/smatch.git). Compile tested. Signed-off-by: Dan Carpenter Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 2a5f077..76de889 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -612,9 +612,9 @@ static int _osd_req_list_objects(struct osd_request *or, WARN_ON(or->in.bio); bio = bio_map_kern(q, list, len, or->alloc_flags); - if (!bio) { + if (IS_ERR(bio)) { OSD_ERR("!!! Failed to allocate list_objects BIO\n"); - return -ENOMEM; + return PTR_ERR(bio); } bio->bi_rw &= ~(1 << BIO_RW); -- cgit v0.10.2 From 71f32e31e5638df37904697e2d04182935add85d Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 19 Apr 2009 19:11:42 +0300 Subject: [SCSI] libosd: OSD2r05: Prepare for rev5 attribute list changes In OSD2r05 draft each attribute list element header was changed so attribute-value would be 8 bytes aligned. In OSD2r01-r04 it was aligned on 2 bytes. (This is because in OSD2r01 the complete element was 8 bytes padded at end but the header was not adjusted and caused permanent miss-alignment.) OSD1 elements are not padded and might be or might not be aligned. OSD1 is still supported. In this code we do all the code re-factoring to separate OSD1/OSD2 differences but do not change actual wire format. All wire format changes will happen in one patch later, for bisect-ability. Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 76de889..e266f80 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -205,6 +205,69 @@ static unsigned _osd_req_alist_elem_size(struct osd_request *or, unsigned len) osdv2_attr_list_elem_size(len); } +static void _osd_req_alist_elem_encode(struct osd_request *or, + void *attr_last, const struct osd_attr *oa) +{ + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_element *attr = attr_last; + + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + } else { + struct osdv2_attributes_list_element *attr = attr_last; + + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + } +} + +static int _osd_req_alist_elem_decode(struct osd_request *or, + void *cur_p, struct osd_attr *oa, unsigned max_bytes) +{ + unsigned inc; + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_element *attr = cur_p; + + if (max_bytes < sizeof(*attr)) + return -1; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + if (inc > max_bytes) + return -1; + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + + /* OSD1: On empty attributes we return a pointer to 2 bytes + * of zeros. This keeps similar behaviour with OSD2. + * (See below) + */ + oa->val_ptr = likely(oa->len) ? attr->attr_val : + (u8 *)&attr->attr_bytes; + } else { + struct osdv2_attributes_list_element *attr = cur_p; + + if (max_bytes < sizeof(*attr)) + return -1; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + if (inc > max_bytes) + return -1; + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + + oa->val_ptr = attr->attr_val; + } + return inc; +} + static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head) { return osd_req_is_ver1(or) ? @@ -798,7 +861,6 @@ int osd_req_add_set_attr_list(struct osd_request *or, attr_last = or->set_attr.buff + total_bytes; for (; nelem; --nelem) { - struct osd_attributes_list_element *attr; unsigned elem_size = _osd_req_alist_elem_size(or, oa->len); total_bytes += elem_size; @@ -811,11 +873,7 @@ int osd_req_add_set_attr_list(struct osd_request *or, or->set_attr.buff + or->set_attr.total_bytes; } - attr = attr_last; - attr->attr_page = cpu_to_be32(oa->attr_page); - attr->attr_id = cpu_to_be32(oa->attr_id); - attr->attr_bytes = cpu_to_be16(oa->len); - memcpy(attr->attr_val, oa->val_ptr, oa->len); + _osd_req_alist_elem_encode(or, attr_last, oa); attr_last += elem_size; ++oa; @@ -1070,15 +1128,10 @@ int osd_req_decode_get_attr_list(struct osd_request *or, } for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) { - struct osd_attributes_list_element *attr = cur_p; - unsigned inc; + int inc = _osd_req_alist_elem_decode(or, cur_p, oa, + returned_bytes - cur_bytes); - oa->len = be16_to_cpu(attr->attr_bytes); - inc = _osd_req_alist_elem_size(or, oa->len); - OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n", - oa->len, inc, cur_bytes); - cur_bytes += inc; - if (cur_bytes > returned_bytes) { + if (inc < 0) { OSD_ERR("BAD FOOD from target. list not valid!" "c=%d r=%d n=%d\n", cur_bytes, returned_bytes, n); @@ -1086,10 +1139,7 @@ int osd_req_decode_get_attr_list(struct osd_request *or, break; } - oa->attr_page = be32_to_cpu(attr->attr_page); - oa->attr_id = be32_to_cpu(attr->attr_id); - oa->val_ptr = attr->attr_val; - + cur_bytes += inc; cur_p += inc; ++oa; } diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h index cd3cbf7..fa8343c 100644 --- a/include/scsi/osd_protocol.h +++ b/include/scsi/osd_protocol.h @@ -301,14 +301,24 @@ struct osd_attributes_list_attrid { } __packed; /* + * NOTE: v1: is not aligned. + */ +struct osdv1_attributes_list_element { + __be32 attr_page; + __be32 attr_id; + __be16 attr_bytes; /* valid bytes at attr_val without padding */ + u8 attr_val[0]; +} __packed; + +/* * osd2r03: 7.1.3.3 List entry format for retrieved attributes and * for setting attributes - * NOTE: v2 is 8-bytes aligned, v1 is not aligned. + * NOTE: v2 is 8-bytes aligned */ -struct osd_attributes_list_element { +struct osdv2_attributes_list_element { __be32 attr_page; __be32 attr_id; - __be16 attr_bytes; + __be16 attr_bytes; /* valid bytes at attr_val without padding */ u8 attr_val[0]; } __packed; @@ -324,13 +334,13 @@ enum { static inline unsigned osdv1_attr_list_elem_size(unsigned len) { - return ALIGN(len + sizeof(struct osd_attributes_list_element), + return ALIGN(len + sizeof(struct osdv1_attributes_list_element), OSDv1_ATTRIBUTES_ELEM_ALIGN); } static inline unsigned osdv2_attr_list_elem_size(unsigned len) { - return ALIGN(len + sizeof(struct osd_attributes_list_element), + return ALIGN(len + sizeof(struct osdv2_attributes_list_element), OSD_ATTRIBUTES_ELEM_ALIGN); } -- cgit v0.10.2 From f8d3a644bec74fd55dbfb11f95af7bf98fa963dc Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 19 Apr 2009 19:13:39 +0300 Subject: [SCSI] libosd: OSD2r05: OSD_CRYPTO_KEYID_SIZE will grow 20 => 32 bytes In OSD2r04 draft, cryptographic key size changed to 32 bytes from OSD1's 20 bytes. This causes a couple of on-the-wire structures to change, including the CDB. In this patch the OSD1/OSD2 handling is separated out in regard to affected structures, but on-the-wire is still the same. All on the wire changes will be submitted in one patch for bisect-ability. Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index e266f80..f61ab84 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -345,9 +345,9 @@ _osd_req_sec_params(struct osd_request *or) struct osd_cdb *ocdb = &or->cdb; if (osd_req_is_ver1(or)) - return &ocdb->v1.sec_params; + return (struct osd_security_parameters *)&ocdb->v1.sec_params; else - return &ocdb->v2.sec_params; + return (struct osd_security_parameters *)&ocdb->v2.sec_params; } void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) @@ -1209,6 +1209,24 @@ static int _osd_req_finalize_attr_page(struct osd_request *or) return ret; } +static inline void osd_sec_parms_set_out_offset(bool is_v1, + struct osd_security_parameters *sec_parms, osd_cdb_offset offset) +{ + if (is_v1) + sec_parms->v1.data_out_integrity_check_offset = offset; + else + sec_parms->v2.data_out_integrity_check_offset = offset; +} + +static inline void osd_sec_parms_set_in_offset(bool is_v1, + struct osd_security_parameters *sec_parms, osd_cdb_offset offset) +{ + if (is_v1) + sec_parms->v1.data_in_integrity_check_offset = offset; + else + sec_parms->v2.data_in_integrity_check_offset = offset; +} + static int _osd_req_finalize_data_integrity(struct osd_request *or, bool has_in, bool has_out, const u8 *cap_key) { @@ -1232,8 +1250,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or, or->out_data_integ.get_attributes_bytes = cpu_to_be64( or->enc_get_attr.total_bytes); - sec_parms->data_out_integrity_check_offset = - osd_req_encode_offset(or, or->out.total_bytes, &pad); + osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms, + osd_req_encode_offset(or, or->out.total_bytes, &pad)); ret = _req_append_segment(or, pad, &seg, or->out.last_seg, &or->out); @@ -1253,8 +1271,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or, }; unsigned pad; - sec_parms->data_in_integrity_check_offset = - osd_req_encode_offset(or, or->in.total_bytes, &pad); + osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms, + osd_req_encode_offset(or, or->in.total_bytes, &pad)); ret = _req_append_segment(or, pad, &seg, or->in.last_seg, &or->in); diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h index fa8343c..bbeceeb 100644 --- a/include/scsi/osd_protocol.h +++ b/include/scsi/osd_protocol.h @@ -33,8 +33,10 @@ enum { OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */ OSD_SYSTEMID_LEN = 20, - OSD_CRYPTO_KEYID_SIZE = 20, + OSDv1_CRYPTO_KEYID_SIZE = 20, /*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/ + OSDv2_CRYPTO_KEYID_SIZE = 20, + OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE, OSD_CRYPTO_SEED_SIZE = 4, OSD_CRYPTO_NONCE_SIZE = 12, OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */ @@ -204,29 +206,40 @@ struct osd_cdb_head { /*80*/ /*160 v1*/ -/*184 v2*/ -struct osd_security_parameters { -/*160*/u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; +struct osdv1_security_parameters { +/*160*/u8 integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE]; /*180*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE]; /*192*/osd_cdb_offset data_in_integrity_check_offset; /*196*/osd_cdb_offset data_out_integrity_check_offset; } __packed; /*200 v1*/ -/*224 v2*/ -/* FIXME: osdv2_security_parameters */ +/*184 v2*/ +struct osdv2_security_parameters { +/*184*/u8 integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE]; +/*216*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE]; +/*228*/osd_cdb_offset data_in_integrity_check_offset; +/*232*/osd_cdb_offset data_out_integrity_check_offset; +} __packed; +/*236 v2*/ + +struct osd_security_parameters { + union { + struct osdv1_security_parameters v1; + struct osdv2_security_parameters v2; + }; +}; struct osdv1_cdb { struct osd_cdb_head h; u8 caps[OSDv1_CAP_LEN]; - struct osd_security_parameters sec_params; + struct osdv1_security_parameters sec_params; } __packed; struct osdv2_cdb { struct osd_cdb_head h; u8 caps[OSD_CAP_LEN]; - struct osd_security_parameters sec_params; - /* FIXME: osdv2_security_parameters */ + struct osdv2_security_parameters sec_params; } __packed; struct osd_cdb { @@ -429,15 +442,35 @@ struct osd_data_out_integrity_info { __be64 data_bytes; __be64 set_attributes_bytes; __be64 get_attributes_bytes; - __be64 integrity_check_value; + __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; } __packed; +/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference + * Is the sizeof the structure since in OSD1 the last array is smaller. Use + * below for version independent handling of this structure + */ +static inline int osd_data_out_integrity_info_sizeof(bool is_ver1) +{ + return sizeof(struct osd_data_out_integrity_info) - + (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE)); +} + struct osd_data_in_integrity_info { __be64 data_bytes; __be64 retrieved_attributes_bytes; - __be64 integrity_check_value; + __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; } __packed; +/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference + * Is the sizeof the structure since in OSD1 the last array is smaller. Use + * below for version independent handling of this structure + */ +static inline int osd_data_in_integrity_info_sizeof(bool is_ver1) +{ + return sizeof(struct osd_data_in_integrity_info) - + (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE)); +} + struct osd_timestamp { u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */ } __packed; -- cgit v0.10.2 From e9da4d7f731dafc2b93ce7b31aa09c4d935ef978 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 19 Apr 2009 19:17:54 +0300 Subject: [SCSI] libosd: OSD2r05: on-the-wire changes for latest OSD2 revision 5. OSC's OSD2 target: [git clone git://git.open-osd.org/osc-osd/ master] (Initiator code prior to this patch must use: "git checkout CDB_VER_OSD2r01" in the target tree above) This is a summery of the wire changes: * OSDv2_ADDITIONAL_CDB_LENGTH == 192 => 228 (Total CDB is now 236 bytes) * Attributes List Element Header grew, so attribute values are 8 bytes aligned. * Cryptographic keys and signatures are 20 => 32 * Few new definitions. (Still missing new standard definitions attribute values, these do not change wire format and will be added later when needed) Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index f61ab84..1ce6b24 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -263,7 +263,12 @@ static int _osd_req_alist_elem_decode(struct osd_request *or, oa->attr_page = be32_to_cpu(attr->attr_page); oa->attr_id = be32_to_cpu(attr->attr_id); - oa->val_ptr = attr->attr_val; + /* OSD2: For convenience, on empty attributes, we return 8 bytes + * of zeros here. This keeps the same behaviour with OSD2r04, + * and is nice with null terminating ASCII fields. + * oa->val_ptr == NULL marks the end-of-list, or error. + */ + oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved; } return inc; } diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h index bbeceeb..62b2ab8 100644 --- a/include/scsi/osd_protocol.h +++ b/include/scsi/osd_protocol.h @@ -24,18 +24,17 @@ enum { OSDv1_ADDITIONAL_CDB_LENGTH = 192, OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8, OSDv1_CAP_LEN = 80, + /* Latest supported version */ -/* OSD_ADDITIONAL_CDB_LENGTH = 216,*/ + OSDv2_ADDITIONAL_CDB_LENGTH = 228, OSD_ADDITIONAL_CDB_LENGTH = - OSDv1_ADDITIONAL_CDB_LENGTH, /* FIXME: Pete rev-001 sup */ + OSDv2_ADDITIONAL_CDB_LENGTH, OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8, -/* OSD_CAP_LEN = 104,*/ - OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */ + OSD_CAP_LEN = 104, OSD_SYSTEMID_LEN = 20, OSDv1_CRYPTO_KEYID_SIZE = 20, - /*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/ - OSDv2_CRYPTO_KEYID_SIZE = 20, + OSDv2_CRYPTO_KEYID_SIZE = 32, OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE, OSD_CRYPTO_SEED_SIZE = 4, OSD_CRYPTO_NONCE_SIZE = 12, @@ -166,7 +165,11 @@ struct osd_cdb_head { /* called allocation_length in some commands */ /*32*/ __be64 length; /*40*/ __be64 start_address; -/*48*/ __be32 list_identifier;/* Rarely used */ + union { +/*48*/ __be32 list_identifier;/* Rarely used */ + /* OSD2r05 5.2.5 CDB continuation length */ +/*48*/ __be32 cdb_continuation_length; + }; } __packed v2; }; /*52*/ union { /* selected attributes mode Page/List/Single */ @@ -331,6 +334,7 @@ struct osdv1_attributes_list_element { struct osdv2_attributes_list_element { __be32 attr_page; __be32 attr_id; + u8 reserved[6]; __be16 attr_bytes; /* valid bytes at attr_val without padding */ u8 attr_val[0]; } __packed; @@ -520,7 +524,7 @@ enum osd_capability_bit_masks { OSD_SEC_CAP_NONE1 = BIT(8), OSD_SEC_CAP_NONE2 = BIT(9), - OSD_SEC_CAP_NONE3 = BIT(10), + OSD_SEC_GBL_REM = BIT(10), /*v2 only*/ OSD_SEC_CAP_QUERY = BIT(11), /*v2 only*/ OSD_SEC_CAP_M_OBJECT = BIT(12), /*v2 only*/ OSD_SEC_CAP_POL_SEC = BIT(13), @@ -595,8 +599,7 @@ struct osdv1_capability { struct osd_capability { struct osd_capability_head h; -/* struct osd_cap_object_descriptor od;*/ - struct osdv1_cap_object_descriptor od; /* FIXME: Pete rev-001 sup */ + struct osd_cap_object_descriptor od; } __packed; /** -- cgit v0.10.2 From e60990023cac11bc6185e7a7f1007fbbb8d30e4d Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 07:06:37 -0500 Subject: davinci: timers: use clk_get_rate() Use clock framework instead of hard-coded CLOCK_TICK_RATE for determining timer tick frequencies. Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 88864ae..494e01b 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -31,6 +31,7 @@ #include "clock.h" static struct clock_event_device clockevent_davinci; +static unsigned int davinci_clock_tick_rate; #define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) #define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) @@ -282,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - t->period = CLOCK_TICK_RATE / (HZ); + t->period = davinci_clock_tick_rate / (HZ); t->opts = TIMER_OPTS_PERIODIC; timer32_config(t); break; @@ -309,21 +310,29 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { + struct clk *timer_clk; + static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; /* init timer hw */ timer_init(); + timer_clk = clk_get(NULL, "timer0"); + BUG_ON(IS_ERR(timer_clk)); + clk_enable(timer_clk); + + davinci_clock_tick_rate = clk_get_rate(timer_clk); + /* setup clocksource */ clocksource_davinci.mult = - clocksource_khz2mult(CLOCK_TICK_RATE/1000, + clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); if (clocksource_register(&clocksource_davinci)) printk(err, clocksource_davinci.name); /* setup clockevent */ - clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); @@ -343,6 +352,15 @@ struct sys_timer davinci_timer = { void davinci_watchdog_reset(void) { u32 tgcr, wdtcr; void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); + struct device dev; + struct clk *wd_clk; + char *name = "watchdog"; + + dev_set_name(&dev, name); + wd_clk = clk_get(&dev, NULL); + if (WARN_ON(IS_ERR(wd_clk))) + return; + clk_enable(wd_clk); /* disable, internal clock source */ __raw_writel(0, base + TCR); -- cgit v0.10.2 From a4768d2275cb7c0d2a665b9ad4de07834be0714b Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 07:18:14 -0500 Subject: davinci: add EDMA driver Original code for 2.6.10 and 2.6.28 series done by Texas Instruments and MontaVista, but major updates and rework done by Troy Kisky and David Brownell. Cc: Sergei Shtylyov Cc: Sudhakar Rajashekhara Cc: Troy Kisky Cc: David Brownell Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 4dc4585..3ee3d73 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o usb.o + gpio.o mux.o devices.o dma.o usb.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c new file mode 100644 index 0000000..15e9eb1 --- /dev/null +++ b/arch/arm/mach-davinci/dma.c @@ -0,0 +1,1135 @@ +/* + * EDMA3 support for DaVinci + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + + +/* Offsets matching "struct edmacc_param" */ +#define PARM_OPT 0x00 +#define PARM_SRC 0x04 +#define PARM_A_B_CNT 0x08 +#define PARM_DST 0x0c +#define PARM_SRC_DST_BIDX 0x10 +#define PARM_LINK_BCNTRLD 0x14 +#define PARM_SRC_DST_CIDX 0x18 +#define PARM_CCNT 0x1c + +#define PARM_SIZE 0x20 + +/* Offsets for EDMA CC global channel registers and their shadows */ +#define SH_ER 0x00 /* 64 bits */ +#define SH_ECR 0x08 /* 64 bits */ +#define SH_ESR 0x10 /* 64 bits */ +#define SH_CER 0x18 /* 64 bits */ +#define SH_EER 0x20 /* 64 bits */ +#define SH_EECR 0x28 /* 64 bits */ +#define SH_EESR 0x30 /* 64 bits */ +#define SH_SER 0x38 /* 64 bits */ +#define SH_SECR 0x40 /* 64 bits */ +#define SH_IER 0x50 /* 64 bits */ +#define SH_IECR 0x58 /* 64 bits */ +#define SH_IESR 0x60 /* 64 bits */ +#define SH_IPR 0x68 /* 64 bits */ +#define SH_ICR 0x70 /* 64 bits */ +#define SH_IEVAL 0x78 +#define SH_QER 0x80 +#define SH_QEER 0x84 +#define SH_QEECR 0x88 +#define SH_QEESR 0x8c +#define SH_QSER 0x90 +#define SH_QSECR 0x94 +#define SH_SIZE 0x200 + +/* Offsets for EDMA CC global registers */ +#define EDMA_REV 0x0000 +#define EDMA_CCCFG 0x0004 +#define EDMA_QCHMAP 0x0200 /* 8 registers */ +#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ +#define EDMA_QDMAQNUM 0x0260 +#define EDMA_QUETCMAP 0x0280 +#define EDMA_QUEPRI 0x0284 +#define EDMA_EMR 0x0300 /* 64 bits */ +#define EDMA_EMCR 0x0308 /* 64 bits */ +#define EDMA_QEMR 0x0310 +#define EDMA_QEMCR 0x0314 +#define EDMA_CCERR 0x0318 +#define EDMA_CCERRCLR 0x031c +#define EDMA_EEVAL 0x0320 +#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ +#define EDMA_QRAE 0x0380 /* 4 registers */ +#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ +#define EDMA_QSTAT 0x0600 /* 2 registers */ +#define EDMA_QWMTHRA 0x0620 +#define EDMA_QWMTHRB 0x0624 +#define EDMA_CCSTAT 0x0640 + +#define EDMA_M 0x1000 /* global channel registers */ +#define EDMA_ECR 0x1008 +#define EDMA_ECRH 0x100C +#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ +#define EDMA_PARM 0x4000 /* 128 param entries */ + +#define DAVINCI_DMA_3PCC_BASE 0x01C00000 + +#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) + +#define EDMA_MAX_DMACH 64 +#define EDMA_MAX_PARAMENTRY 512 +#define EDMA_MAX_EVQUE 2 /* FIXME too small */ + + +/*****************************************************************************/ + +static void __iomem *edmacc_regs_base; + +static inline unsigned int edma_read(int offset) +{ + return (unsigned int)__raw_readl(edmacc_regs_base + offset); +} + +static inline void edma_write(int offset, int val) +{ + __raw_writel(val, edmacc_regs_base + offset); +} +static inline void edma_modify(int offset, unsigned and, unsigned or) +{ + unsigned val = edma_read(offset); + val &= and; + val |= or; + edma_write(offset, val); +} +static inline void edma_and(int offset, unsigned and) +{ + unsigned val = edma_read(offset); + val &= and; + edma_write(offset, val); +} +static inline void edma_or(int offset, unsigned or) +{ + unsigned val = edma_read(offset); + val |= or; + edma_write(offset, val); +} +static inline unsigned int edma_read_array(int offset, int i) +{ + return edma_read(offset + (i << 2)); +} +static inline void edma_write_array(int offset, int i, unsigned val) +{ + edma_write(offset + (i << 2), val); +} +static inline void edma_modify_array(int offset, int i, + unsigned and, unsigned or) +{ + edma_modify(offset + (i << 2), and, or); +} +static inline void edma_or_array(int offset, int i, unsigned or) +{ + edma_or(offset + (i << 2), or); +} +static inline void edma_or_array2(int offset, int i, int j, unsigned or) +{ + edma_or(offset + ((i*2 + j) << 2), or); +} +static inline void edma_write_array2(int offset, int i, int j, unsigned val) +{ + edma_write(offset + ((i*2 + j) << 2), val); +} +static inline unsigned int edma_shadow0_read(int offset) +{ + return edma_read(EDMA_SHADOW0 + offset); +} +static inline unsigned int edma_shadow0_read_array(int offset, int i) +{ + return edma_read(EDMA_SHADOW0 + offset + (i << 2)); +} +static inline void edma_shadow0_write(int offset, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset, val); +} +static inline void edma_shadow0_write_array(int offset, int i, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset + (i << 2), val); +} +static inline unsigned int edma_parm_read(int offset, int param_no) +{ + return edma_read(EDMA_PARM + offset + (param_no << 5)); +} +static inline void edma_parm_write(int offset, int param_no, unsigned val) +{ + edma_write(EDMA_PARM + offset + (param_no << 5), val); +} +static inline void edma_parm_modify(int offset, int param_no, + unsigned and, unsigned or) +{ + edma_modify(EDMA_PARM + offset + (param_no << 5), and, or); +} +static inline void edma_parm_and(int offset, int param_no, unsigned and) +{ + edma_and(EDMA_PARM + offset + (param_no << 5), and); +} +static inline void edma_parm_or(int offset, int param_no, unsigned or) +{ + edma_or(EDMA_PARM + offset + (param_no << 5), or); +} + +/*****************************************************************************/ + +/* actual number of DMA channels and slots on this silicon */ +static unsigned num_channels; +static unsigned num_slots; + +static struct dma_interrupt_data { + void (*callback)(unsigned channel, unsigned short ch_status, + void *data); + void *data; +} intr_data[EDMA_MAX_DMACH]; + +/* The edma_inuse bit for each PaRAM slot is clear unless the + * channel is in use ... by ARM or DSP, for QDMA, or whatever. + */ +static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); + +/* The edma_noevent bit for each channel is clear unless + * it doesn't trigger DMA events on this platform. It uses a + * bit of SOC-specific initialization code. + */ +static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + +/* dummy param set used to (re)initialize parameter RAM slots */ +static const struct edmacc_param dummy_paramset = { + .link_bcntrld = 0xffff, + .ccnt = 1, +}; + +static const int __initconst +queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = { +/* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1} +}; + +static const int __initconst +queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1} +}; + +/*****************************************************************************/ + +static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) +{ + int bit = (ch_no & 0x7) * 4; + + /* default to low priority queue */ + if (queue_no == EVENTQ_DEFAULT) + queue_no = EVENTQ_1; + + queue_no &= 7; + edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3), + ~(0x7 << bit), queue_no << bit); +} + +static void __init map_queue_tc(int queue_no, int tc_no) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); +} + +static void __init assign_priority_to_queue(int queue_no, int priority) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit)); +} + +static inline void +setup_dma_interrupt(unsigned lch, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data) +{ + if (!callback) { + edma_shadow0_write_array(SH_IECR, lch >> 5, + (1 << (lch & 0x1f))); + } + + intr_data[lch].callback = callback; + intr_data[lch].data = data; + + if (callback) { + edma_shadow0_write_array(SH_ICR, lch >> 5, + (1 << (lch & 0x1f))); + edma_shadow0_write_array(SH_IESR, lch >> 5, + (1 << (lch & 0x1f))); + } +} + +/****************************************************************************** + * + * DMA interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_irq_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_irq_handler\n"); + + if ((edma_shadow0_read_array(SH_IPR, 0) == 0) + && (edma_shadow0_read_array(SH_IPR, 1) == 0)) + return IRQ_NONE; + + while (1) { + int j; + if (edma_shadow0_read_array(SH_IPR, 0)) + j = 0; + else if (edma_shadow0_read_array(SH_IPR, 1)) + j = 1; + else + break; + dev_dbg(data, "IPR%d %08x\n", j, + edma_shadow0_read_array(SH_IPR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_shadow0_write_array(SH_ICR, j, (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, DMA_COMPLETE, + intr_data[k].data); + } + } + } + cnt++; + if (cnt > 10) + break; + } + edma_shadow0_write(SH_IEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * DMA error interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_ccerr_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_ccerr_handler\n"); + + if ((edma_read_array(EDMA_EMR, 0) == 0) && + (edma_read_array(EDMA_EMR, 1) == 0) && + (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0)) + return IRQ_NONE; + + while (1) { + int j = -1; + if (edma_read_array(EDMA_EMR, 0)) + j = 0; + else if (edma_read_array(EDMA_EMR, 1)) + j = 1; + if (j >= 0) { + dev_dbg(data, "EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_read_array(EDMA_EMR, j) & (1 << i)) { + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, 1 << i); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, + (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, + DMA_CC_ERROR, + intr_data + [k].data); + } + } + } + } else if (edma_read(EDMA_QEMR)) { + dev_dbg(data, "QEMR %02x\n", + edma_read(EDMA_QEMR)); + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_QEMR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_QEMCR, 1 << i); + edma_shadow0_write(SH_QSECR, (1 << i)); + + /* NOTE: not reported!! */ + } + } + } else if (edma_read(EDMA_CCERR)) { + dev_dbg(data, "CCERR %08x\n", + edma_read(EDMA_CCERR)); + /* FIXME: CCERR.BIT(16) ignored! much better + * to just write CCERRCLR with CCERR value... + */ + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_CCERR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_CCERRCLR, 1 << i); + + /* NOTE: not reported!! */ + } + } + } + if ((edma_read_array(EDMA_EMR, 0) == 0) + && (edma_read_array(EDMA_EMR, 1) == 0) + && (edma_read(EDMA_QEMR) == 0) + && (edma_read(EDMA_CCERR) == 0)) { + break; + } + cnt++; + if (cnt > 10) + break; + } + edma_write(EDMA_EEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * Transfer controller error interrupt handlers + * + *****************************************************************************/ + +#define tc_errs_handled false /* disabled as long as they're NOPs */ + +static irqreturn_t dma_tc0err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc0err_handler\n"); + return IRQ_HANDLED; +} + +static irqreturn_t dma_tc1err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc1err_handler\n"); + return IRQ_HANDLED; +} + +/*-----------------------------------------------------------------------*/ + +/* Resource alloc/free: dma channels, parameter RAM slots */ + +/** + * edma_alloc_channel - allocate DMA channel and paired parameter RAM + * @channel: specific channel to allocate; negative for "any unmapped channel" + * @callback: optional; to be issued on DMA completion or errors + * @data: passed to callback + * @eventq_no: an EVENTQ_* constant, used to choose which Transfer + * Controller (TC) executes requests using this channel. Use + * EVENTQ_DEFAULT unless you really need a high priority queue. + * + * This allocates a DMA channel and its associated parameter RAM slot. + * The parameter RAM is initialized to hold a dummy transfer. + * + * Normal use is to pass a specific channel number as @channel, to make + * use of hardware events mapped to that channel. When the channel will + * be used only for software triggering or event chaining, channels not + * mapped to hardware events (or mapped to unused events) are preferable. + * + * DMA transfers start from a channel using edma_start(), or by + * chaining. When the transfer described in that channel's parameter RAM + * slot completes, that slot's data may be reloaded through a link. + * + * DMA errors are only reported to the @callback associated with the + * channel driving that transfer, but transfer completion callbacks can + * be sent to another channel under control of the TCC field in + * the option word of the transfer's parameter RAM set. Drivers must not + * use DMA transfer completion callbacks for channels they did not allocate. + * (The same applies to TCC codes used in transfer chaining.) + * + * Returns the number of the channel, else negative errno. + */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, + enum dma_event_q eventq_no) +{ + if (channel < 0) { + channel = 0; + for (;;) { + channel = find_next_bit(edma_noevent, + num_channels, channel); + if (channel == num_channels) + return -ENOMEM; + if (!test_and_set_bit(channel, edma_inuse)) + break; + channel++; + } + } else if (channel >= num_channels) { + return -EINVAL; + } else if (test_and_set_bit(channel, edma_inuse)) { + return -EBUSY; + } + + /* ensure access through shadow region 0 */ + edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); + + /* ensure no events are pending */ + edma_stop(channel); + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + + if (callback) + setup_dma_interrupt(channel, callback, data); + + map_dmach_queue(channel, eventq_no); + + return channel; +} +EXPORT_SYMBOL(edma_alloc_channel); + + +/** + * edma_free_channel - deallocate DMA channel + * @channel: dma channel returned from edma_alloc_channel() + * + * This deallocates the DMA channel and associated parameter RAM slot + * allocated by edma_alloc_channel(). + * + * Callers are responsible for ensuring the channel is inactive, and + * will not be reactivated by linking, chaining, or software calls to + * edma_start(). + */ +void edma_free_channel(unsigned channel) +{ + if (channel >= num_channels) + return; + + setup_dma_interrupt(channel, NULL, NULL); + /* REVISIT should probably take out of shadow region 0 */ + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + clear_bit(channel, edma_inuse); +} +EXPORT_SYMBOL(edma_free_channel); + +/** + * edma_alloc_slot - allocate DMA parameter RAM + * @slot: specific slot to allocate; negative for "any unused slot" + * + * This allocates a parameter RAM slot, initializing it to hold a + * dummy transfer. Slots allocated using this routine have not been + * mapped to a hardware DMA channel, and will normally be used by + * linking to them from a slot associated with a DMA channel. + * + * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific + * slots may be allocated on behalf of DSP firmware. + * + * Returns the number of the slot, else negative errno. + */ +int edma_alloc_slot(int slot) +{ + if (slot < 0) { + slot = num_channels; + for (;;) { + slot = find_next_zero_bit(edma_inuse, + num_slots, slot); + if (slot == num_slots) + return -ENOMEM; + if (!test_and_set_bit(slot, edma_inuse)) + break; + } + } else if (slot < num_channels || slot >= num_slots) { + return -EINVAL; + } else if (test_and_set_bit(slot, edma_inuse)) { + return -EBUSY; + } + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + + return slot; +} +EXPORT_SYMBOL(edma_alloc_slot); + +/** + * edma_free_slot - deallocate DMA parameter RAM + * @slot: parameter RAM slot returned from edma_alloc_slot() + * + * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). + * Callers are responsible for ensuring the slot is inactive, and will + * not be activated. + */ +void edma_free_slot(unsigned slot) +{ + if (slot < num_channels || slot >= num_slots) + return; + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + clear_bit(slot, edma_inuse); +} +EXPORT_SYMBOL(edma_free_slot); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (i) -- read/write partial slots */ + +/** + * edma_set_src - set initial DMA source address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma_set_src_index(). + */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set SAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); + } else { + /* clear SAM */ + i &= ~SAM; + } + edma_parm_write(PARM_OPT, slot, i); + + /* set the source port address + in source register of param structure */ + edma_parm_write(PARM_SRC, slot, src_port); + } +} +EXPORT_SYMBOL(edma_set_src); + +/** + * edma_set_dest - set initial DMA destination address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @dest_port: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma_set_dest_index(). + */ +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set DAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); + } else { + /* clear DAM */ + i &= ~DAM; + } + edma_parm_write(PARM_OPT, slot, i); + /* set the destination port address + in dest register of param structure */ + edma_parm_write(PARM_DST, slot, dest_port); + } +} +EXPORT_SYMBOL(edma_set_dest); + +/** + * edma_get_position - returns the current transfer points + * @slot: parameter RAM slot being examined + * @src: pointer to source port position + * @dst: pointer to destination port position + * + * Returns current source and destination addresses for a particular + * parameter RAM slot. Its channel should not be active when this is called. + */ +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +{ + struct edmacc_param temp; + + edma_read_slot(slot, &temp); + if (src != NULL) + *src = temp.src; + if (dst != NULL) + *dst = temp.dst; +} +EXPORT_SYMBOL(edma_get_position); + +/** + * edma_set_src_index - configure DMA source address indexing + * @slot: parameter RAM slot being configured + * @src_bidx: byte offset between source arrays in a frame + * @src_cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0xffff0000, src_bidx); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0xffff0000, src_cidx); + } +} +EXPORT_SYMBOL(edma_set_src_index); + +/** + * edma_set_dest_index - configure DMA destination address indexing + * @slot: parameter RAM slot being configured + * @dest_bidx: byte offset between destination arrays in a frame + * @dest_cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0x0000ffff, dest_bidx << 16); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0x0000ffff, dest_cidx << 16); + } +} +EXPORT_SYMBOL(edma_set_dest_index); + +/** + * edma_set_transfer_params - configure DMA transfer parameters + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma_set_transfer_params(unsigned slot, + u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_LINK_BCNTRLD, slot, + 0x0000ffff, bcnt_rld << 16); + if (sync_mode == ASYNC) + edma_parm_and(PARM_OPT, slot, ~SYNCDIM); + else + edma_parm_or(PARM_OPT, slot, SYNCDIM); + /* Set the acount, bcount, ccount registers */ + edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt); + edma_parm_write(PARM_CCNT, slot, ccnt); + } +} +EXPORT_SYMBOL(edma_set_transfer_params); + +/** + * edma_link - link one parameter RAM slot to another + * @from: parameter RAM slot originating the link + * @to: parameter RAM slot which is the link target + * + * The originating slot should not be part of any active DMA transfer. + */ +void edma_link(unsigned from, unsigned to) +{ + if (from >= num_slots) + return; + if (to >= num_slots) + return; + edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to)); +} +EXPORT_SYMBOL(edma_link); + +/** + * edma_unlink - cut link from one parameter RAM slot + * @from: parameter RAM slot originating the link + * + * The originating slot should not be part of any active DMA transfer. + * Its link is set to 0xffff. + */ +void edma_unlink(unsigned from) +{ + if (from >= num_slots) + return; + edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff); +} +EXPORT_SYMBOL(edma_unlink); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (ii) -- read/write whole parameter sets */ + +/** + * edma_write_slot - write parameter RAM data for slot + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma_write_slot(unsigned slot, const struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE); +} +EXPORT_SYMBOL(edma_write_slot); + +/** + * edma_read_slot - read parameter RAM data from slot + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma_read_slot(unsigned slot, struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE); +} +EXPORT_SYMBOL(edma_read_slot); + +/*-----------------------------------------------------------------------*/ + +/* Various EDMA channel control operations */ + +/** + * edma_pause - pause dma on a channel + * @channel: on which edma_start() has been called + * + * This temporarily disables EDMA hardware events on the specified channel, + * preventing them from triggering new transfers on its behalf + */ +void edma_pause(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_pause); + +/** + * edma_resume - resumes dma on a paused channel + * @channel: on which edma_pause() has been called + * + * This re-enables EDMA hardware events on the specified channel. + */ +void edma_resume(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EESR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_resume); + +/** + * edma_start - start dma on a channel + * @channel: channel being activated + * + * Channels with event associations will be triggered by their hardware + * events, and channels without such associations will be triggered by + * software. (At this writing there is no interface for using software + * triggers except with channels that don't support hardware triggers.) + * + * Returns zero on success, else negative errno. + */ +int edma_start(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + /* EDMA channels without event association */ + if (test_bit(channel, edma_noevent)) { + pr_debug("EDMA: ESR%d %08x\n", j, + edma_shadow0_read_array(SH_ESR, j)); + edma_shadow0_write_array(SH_ESR, j, mask); + return 0; + } + + /* EDMA channel with event association */ + pr_debug("EDMA: ER%d %08x\n", j, + edma_shadow0_read_array(SH_ER, j)); + /* Clear any pending error */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_shadow0_write_array(SH_EESR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL(edma_start); + +/** + * edma_stop - stops dma on the channel passed + * @channel: channel being deactivated + * + * When @lch is a channel, any active transfer is paused and + * all pending hardware events are cleared. The current transfer + * may not be resumed, and the channel's Parameter RAM should be + * reinitialized before being reused. + */ +void edma_stop(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, j, mask); + edma_shadow0_write_array(SH_ECR, j, mask); + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write_array(EDMA_EMCR, j, mask); + + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + + /* REVISIT: consider guarding against inappropriate event + * chaining by overwriting with dummy_paramset. + */ + } +} +EXPORT_SYMBOL(edma_stop); + +/****************************************************************************** + * + * It cleans ParamEntry qand bring back EDMA to initial state if media has + * been removed before EDMA has finished.It is usedful for removable media. + * Arguments: + * ch_no - channel no + * + * Return: zero on success, or corresponding error no on failure + * + * FIXME this should not be needed ... edma_stop() should suffice. + * + *****************************************************************************/ + +void edma_clean_channel(unsigned channel) +{ + if (channel < num_channels) { + int j = (channel >> 5); + unsigned int mask = 1 << (channel & 0x1f); + + pr_debug("EDMA: EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + edma_shadow0_write_array(SH_ECR, j, mask); + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3); + } +} +EXPORT_SYMBOL(edma_clean_channel); + +/* + * edma_clear_event - clear an outstanding event on the DMA channel + * Arguments: + * channel - channel number + */ +void edma_clear_event(unsigned channel) +{ + if (channel >= num_channels) + return; + if (channel < 32) + edma_write(EDMA_ECR, 1 << channel); + else + edma_write(EDMA_ECRH, 1 << (channel - 32)); +} +EXPORT_SYMBOL(edma_clear_event); + +/*-----------------------------------------------------------------------*/ + +static int __init edma_probe(struct platform_device *pdev) +{ + struct edma_soc_info *info = pdev->dev.platform_data; + int i; + int status; + const s8 *noevent; + int irq = 0, err_irq = 0; + struct resource *r; + resource_size_t len; + + if (!info) + return -ENODEV; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc"); + if (!r) + return -ENODEV; + + len = r->end - r->start + 1; + + r = request_mem_region(r->start, len, r->name); + if (!r) + return -EBUSY; + + edmacc_regs_base = ioremap(r->start, len); + if (!edmacc_regs_base) { + status = -EBUSY; + goto fail1; + } + + num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH); + num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY); + + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base); + + for (i = 0; i < num_slots; i++) + memcpy_toio(edmacc_regs_base + PARM_OFFSET(i), + &dummy_paramset, PARM_SIZE); + + noevent = info->noevent; + if (noevent) { + while (*noevent != -1) + set_bit(*noevent++, edma_noevent); + } + + irq = platform_get_irq(pdev, 0); + status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + irq, status); + goto fail; + } + + err_irq = platform_get_irq(pdev, 1); + status = request_irq(err_irq, dma_ccerr_handler, 0, + "edma_error", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + err_irq, status); + goto fail; + } + + if (tc_errs_handled) { + status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0, + "edma_tc0", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + IRQ_TCERRINT0, status); + return status; + } + status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0, + "edma_tc1", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d --> %d\n", + IRQ_TCERRINT, status); + return status; + } + } + + /* Everything lives on transfer controller 1 until otherwise specified. + * This way, long transfers on the low priority queue + * started by the codec engine will not cause audio defects. + */ + for (i = 0; i < num_channels; i++) + map_dmach_queue(i, EVENTQ_1); + + /* Event queue to TC mapping */ + for (i = 0; queue_tc_mapping[i][0] != -1; i++) + map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]); + + /* Event queue priority mapping */ + for (i = 0; queue_priority_mapping[i][0] != -1; i++) + assign_priority_to_queue(queue_priority_mapping[i][0], + queue_priority_mapping[i][1]); + + for (i = 0; i < info->n_region; i++) { + edma_write_array2(EDMA_DRAE, i, 0, 0x0); + edma_write_array2(EDMA_DRAE, i, 1, 0x0); + edma_write_array(EDMA_QRAE, i, 0x0); + } + + return 0; + +fail: + if (err_irq) + free_irq(err_irq, NULL); + if (irq) + free_irq(irq, NULL); + iounmap(edmacc_regs_base); +fail1: + release_mem_region(r->start, len); + return status; +} + + +static struct platform_driver edma_driver = { + .driver.name = "edma", +}; + +static int __init edma_init(void) +{ + return platform_driver_probe(&edma_driver, edma_probe); +} +arch_initcall(edma_init); + diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h new file mode 100644 index 0000000..f6fc539 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -0,0 +1,228 @@ +/* + * TI DAVINCI dma definitions + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + unsigned int opt; + unsigned int src; + unsigned int a_b_cnt; + unsigned int dst; + unsigned int src_dst_bidx; + unsigned int link_bcntrld; + unsigned int src_dst_cidx; + unsigned int ccnt; +}; + +#define CCINT0_INTERRUPT 16 +#define CCERRINT_INTERRUPT 17 +#define TCERRINT0_INTERRUPT 18 +#define TCERRINT1_INTERRUPT 19 + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +#define TRWORD (0x7<<2) +#define PAENTRY (0x1ff<<5) + +/* Drivers should avoid using these symbolic names for dm644x + * channels, and use platform_device IORESOURCE_DMA resources + * instead. (Other DaVinci chips have different peripherals + * and thus have different DMA channel mappings.) + */ +#define DAVINCI_DMA_MCBSP_TX 2 +#define DAVINCI_DMA_MCBSP_RX 3 +#define DAVINCI_DMA_VPSS_HIST 4 +#define DAVINCI_DMA_VPSS_H3A 5 +#define DAVINCI_DMA_VPSS_PRVU 6 +#define DAVINCI_DMA_VPSS_RSZ 7 +#define DAVINCI_DMA_IMCOP_IMXINT 8 +#define DAVINCI_DMA_IMCOP_VLCDINT 9 +#define DAVINCI_DMA_IMCO_PASQINT 10 +#define DAVINCI_DMA_IMCOP_DSQINT 11 +#define DAVINCI_DMA_SPI_SPIX 16 +#define DAVINCI_DMA_SPI_SPIR 17 +#define DAVINCI_DMA_UART0_URXEVT0 18 +#define DAVINCI_DMA_UART0_UTXEVT0 19 +#define DAVINCI_DMA_UART1_URXEVT1 20 +#define DAVINCI_DMA_UART1_UTXEVT1 21 +#define DAVINCI_DMA_UART2_URXEVT2 22 +#define DAVINCI_DMA_UART2_UTXEVT2 23 +#define DAVINCI_DMA_MEMSTK_MSEVT 24 +#define DAVINCI_DMA_MMCRXEVT 26 +#define DAVINCI_DMA_MMCTXEVT 27 +#define DAVINCI_DMA_I2C_ICREVT 28 +#define DAVINCI_DMA_I2C_ICXEVT 29 +#define DAVINCI_DMA_GPIO_GPINT0 32 +#define DAVINCI_DMA_GPIO_GPINT1 33 +#define DAVINCI_DMA_GPIO_GPINT2 34 +#define DAVINCI_DMA_GPIO_GPINT3 35 +#define DAVINCI_DMA_GPIO_GPINT4 36 +#define DAVINCI_DMA_GPIO_GPINT5 37 +#define DAVINCI_DMA_GPIO_GPINT6 38 +#define DAVINCI_DMA_GPIO_GPINT7 39 +#define DAVINCI_DMA_GPIO_GPBNKINT0 40 +#define DAVINCI_DMA_GPIO_GPBNKINT1 41 +#define DAVINCI_DMA_GPIO_GPBNKINT2 42 +#define DAVINCI_DMA_GPIO_GPBNKINT3 43 +#define DAVINCI_DMA_GPIO_GPBNKINT4 44 +#define DAVINCI_DMA_TIMER0_TINT0 48 +#define DAVINCI_DMA_TIMER1_TINT1 49 +#define DAVINCI_DMA_TIMER2_TINT2 50 +#define DAVINCI_DMA_TIMER3_TINT3 51 +#define DAVINCI_DMA_PWM0 52 +#define DAVINCI_DMA_PWM1 53 +#define DAVINCI_DMA_PWM2 54 + +/*ch_status paramater of callback function possible values*/ +#define DMA_COMPLETE 1 +#define DMA_CC_ERROR 2 +#define DMA_TC1_ERROR 3 +#define DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(int slot); +void edma_free_slot(unsigned slot); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +/* UNRELATED TO DMA */ +int davinci_alloc_iram(unsigned size); +void davinci_free_iram(unsigned addr, unsigned size); + +/* platform_data for EDMA driver */ +struct edma_soc_info { + + /* how many dma resources of each type */ + unsigned n_channel; + unsigned n_region; + unsigned n_slot; + unsigned n_tc; + + /* list of channels with no even trigger; terminated by "-1" */ + const s8 *noevent; +}; + +#endif -- cgit v0.10.2 From 474dad54baee8f8abe63ac334357a37021147701 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 7 Dec 2008 11:46:23 -0800 Subject: davinci: gpio bugfixes Update the DaVinci GPIO code to work better on non-dm6446 parts, notably the dm355: - Only handle the number of GPIOs the chip actually has. So for example on dm6467, GPIO-42 is the last GPIO, and trying to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446. - Enable GPIO interrupts on each 16-bit GPIO-irq bank ... previously, only the first five were enabled, so GPIO-80 and above (on dm355) wouldn't trigger IRQs. - Use the right IRQ for each GPIO bank. The wrong values were used for dm355 chips, so GPIO IRQs got routed incorrectly. - Handle up to four pairs of 16-bit GPIO banks ... previously only three were handled, so accessing GPIO-96 and up (e.g. on dm355) would oops. - Update several comments that were dm6446-specific. Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs on the DM355 EVM. One thing this doesn't do is handle the way some of the GPIO numbers on dm6467 are reserved but aren't valid as GPIOs. Some bitmap logic could fix that if needed. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index b49e9d0..1aba41c 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -36,9 +37,10 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; +static unsigned __initdata ngpio; /* create a non-inlined version */ -static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio) +static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } @@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void) { int i, base; - for (i = 0, base = 0; - i < ARRAY_SIZE(chips); - i++, base += 32) { + /* The gpio banks conceptually expose a segmented bitmap, + * and "ngpio" is one more than the largest zero-based + * bit index that's valid. + */ + if (cpu_is_davinci_dm355()) { /* or dm335() */ + ngpio = 104; + } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ + ngpio = 71; + } else if (cpu_is_davinci_dm646x()) { + /* NOTE: each bank has several "reserved" bits, + * unusable as GPIOs. Only 33 of the GPIO numbers + * are usable, and we're not rejecting the others. + */ + ngpio = 43; + } else { + /* if cpu_is_davinci_dm643x() ngpio = 111 */ + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(DAVINCI_N_GPIO < ngpio)) + ngpio = DAVINCI_N_GPIO; + + for (i = 0, base = 0; base < ngpio; i++, base += 32) { chips[i].chip.label = "DaVinci"; chips[i].chip.direction_input = davinci_direction_in; @@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void) chips[i].chip.set = davinci_gpio_set; chips[i].chip.base = base; - chips[i].chip.ngpio = DAVINCI_N_GPIO - base; + chips[i].chip.ngpio = ngpio - base; if (chips[i].chip.ngpio > 32) chips[i].chip.ngpio = 32; @@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup); * We expect irqs will normally be set up as input pins, but they can also be * used as output pins ... which is convenient for testing. * - * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition - * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have - * a good way to hook those up ... + * NOTE: The first few GPIOs also have direct INTC hookups in addition + * to their GPIOBNK0 irq, with a bit less overhead but less flexibility + * on triggering (e.g. no edge options). We don't try to use those. * - * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also + * All those INTC hookups (direct, plus several IRQ banks) can also * serve as EDMA event triggers. */ @@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) } /* - * NOTE: for suspend/resume, probably best to make a sysdev (and class) - * with its suspend/resume calls hooking into the results of the set_wake() + * NOTE: for suspend/resume, probably best to make a platform_device with + * suspend_late/resume_resume calls hooking into results of the set_wake() * calls ... so if no gpios are wakeup events the clock can be disabled, * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * can be set appropriately for GPIOV33 pins. + * (dm6446) can be set appropriately for GPIOV33 pins. */ static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; + unsigned bank_irq; struct clk *clk; + u32 binten = 0; + + if (cpu_is_davinci_dm355()) { /* or dm335() */ + bank_irq = IRQ_DM355_GPIOBNK0; + } else if (cpu_is_davinci_dm644x()) { + bank_irq = IRQ_GPIOBNK0; + } else if (cpu_is_davinci_dm646x()) { + bank_irq = IRQ_DM646X_GPIOBNK0; + } else { + printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); + return -EINVAL; + } clk = clk_get(NULL, "gpio"); if (IS_ERR(clk)) { printk(KERN_ERR "Error %ld getting gpio clock?\n", PTR_ERR(clk)); - return 0; + return PTR_ERR(clk); } - clk_enable(clk); - for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0; - gpio < DAVINCI_N_GPIO; bank++) { + for (gpio = 0, irq = gpio_to_irq(0), bank = 0; + gpio < ngpio; + bank++, bank_irq++) { struct gpio_controller *__iomem g = gpio2controller(gpio); unsigned i; @@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void) __raw_writel(~0, &g->clr_rising); /* set up all irqs in this bank */ - set_irq_chained_handler(bank, gpio_irq_handler); - set_irq_chip_data(bank, g); - set_irq_data(bank, (void *)irq); + set_irq_chained_handler(bank_irq, gpio_irq_handler); + set_irq_chip_data(bank_irq, g); + set_irq_data(bank_irq, (void *)irq); - for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO; - i++, irq++, gpio++) { + for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); set_irq_chip_data(irq, g); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + + binten |= BIT(bank); } /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(0x1f, (void *__iomem) + __raw_writel(binten, (void *__iomem) IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } - arch_initcall(davinci_gpio_irq_setup); diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index 5e7c36b..efe3281 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -28,23 +28,18 @@ * go through boot loaders. * * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are + * need to pay attention to PINMUX registers to be sure those pins are * used as gpios, not with other peripherals. * * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. * * GPIOs can also be on external chips, numbered after the ones built-in * to the DaVinci chip. For now, they won't be usable as IRQ sources. */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ struct gpio_controller { u32 dir; @@ -73,12 +68,14 @@ __gpio_to_controller(unsigned gpio) { void *__iomem ptr; - if (gpio < 32) + if (gpio < 32 * 1) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) + else if (gpio < 32 * 2) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) + else if (gpio < 32 * 3) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + else if (gpio < 32 * 4) + ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); else ptr = NULL; return ptr; -- cgit v0.10.2 From fe277d9bbba9c2851ec11edcd5701f82e034ddd4 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Thu, 26 Mar 2009 19:33:21 -0700 Subject: davinci: PSC: Clear bits in MDCTL reg before setting new bits Clear any set bits in the 'NEXT' field of the MDCTL register in the Power and Sleep Controller (PSC) before setting any new bits. This also allows some minor cleanup by removing some no longer needed lines of code. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index e44544a..84171ab 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -39,6 +39,7 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 +#define MDSTAT_STATE_MASK 0x1f /* Return nonzero iff the domain's clock is active */ int __init davinci_psc_is_clk_active(unsigned int id) @@ -53,14 +54,13 @@ int __init davinci_psc_is_clk_active(unsigned int id) /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ mdctl = __raw_readl(psc_base + MDCTL + 4 * id); - if (enable) - mdctl |= 0x00000003; /* Enable Module */ - else - mdctl &= 0xFFFFFFE2; /* Disable Module */ + mdctl &= ~MDSTAT_STATE_MASK; + mdctl |= next_state; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); @@ -93,12 +93,7 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) } while (!(((ptstat >> domain) & 1) == 0)); } - if (enable) - mdstat_mask = 0x3; - else - mdstat_mask = 0x2; - do { mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); - } while (!((mdstat & 0x0000001F) == mdstat_mask)); + } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); } -- cgit v0.10.2 From 9e16469c83167d6869ad6cbe83312027ec529c64 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Tue, 14 Apr 2009 07:53:02 -0500 Subject: davinci: DM646x: add interrupt number and priorities Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index f4c5ca6..9b0e412 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -96,10 +96,60 @@ #define IRQ_EMUINT 63 #define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 +#define DAVINCI_N_GPIO 104 #define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 +/* DaVinci DM6467-specific Interrupts */ +#define IRQ_DM646X_VP_VERTINT0 0 +#define IRQ_DM646X_VP_VERTINT1 1 +#define IRQ_DM646X_VP_VERTINT2 2 +#define IRQ_DM646X_VP_VERTINT3 3 +#define IRQ_DM646X_VP_ERRINT 4 +#define IRQ_DM646X_RESERVED_1 5 +#define IRQ_DM646X_RESERVED_2 6 +#define IRQ_DM646X_WDINT 7 +#define IRQ_DM646X_CRGENINT0 8 +#define IRQ_DM646X_CRGENINT1 9 +#define IRQ_DM646X_TSIFINT0 10 +#define IRQ_DM646X_TSIFINT1 11 +#define IRQ_DM646X_VDCEINT 12 +#define IRQ_DM646X_USBINT 13 +#define IRQ_DM646X_USBDMAINT 14 +#define IRQ_DM646X_PCIINT 15 +#define IRQ_DM646X_TCERRINT2 20 +#define IRQ_DM646X_TCERRINT3 21 +#define IRQ_DM646X_IDE 22 +#define IRQ_DM646X_HPIINT 23 +#define IRQ_DM646X_EMACRXTHINT 24 +#define IRQ_DM646X_EMACRXINT 25 +#define IRQ_DM646X_EMACTXINT 26 +#define IRQ_DM646X_EMACMISCINT 27 +#define IRQ_DM646X_MCASP0TXINT 28 +#define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_RESERVED_3 31 +#define IRQ_DM646X_MCASP1TXINT 32 +#define IRQ_DM646X_VLQINT 38 +#define IRQ_DM646X_UARTINT2 42 +#define IRQ_DM646X_SPINT0 43 +#define IRQ_DM646X_SPINT1 44 +#define IRQ_DM646X_DSP2ARMINT 45 +#define IRQ_DM646X_RESERVED_4 46 +#define IRQ_DM646X_PSCINT 47 +#define IRQ_DM646X_GPIO0 48 +#define IRQ_DM646X_GPIO1 49 +#define IRQ_DM646X_GPIO2 50 +#define IRQ_DM646X_GPIO3 51 +#define IRQ_DM646X_GPIO4 52 +#define IRQ_DM646X_GPIO5 53 +#define IRQ_DM646X_GPIO6 54 +#define IRQ_DM646X_GPIO7 55 +#define IRQ_DM646X_GPIOBNK0 56 +#define IRQ_DM646X_GPIOBNK1 57 +#define IRQ_DM646X_GPIOBNK2 58 +#define IRQ_DM646X_DDRINT 59 +#define IRQ_DM646X_AEMIFINT 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index e76835c..cf08ef2 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -25,6 +25,7 @@ #include #include +#include #include #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -40,6 +41,8 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +const u8 *davinci_def_priorities; + #define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) static inline unsigned int davinci_irq_readl(int offset) @@ -110,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { +static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_VDINT0] = 2, [IRQ_VDINT1] = 6, [IRQ_VDINT2] = 6, @@ -179,11 +181,82 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_EMUINT] = 7, }; +static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - const u8 *priority = default_priorities; + + if (cpu_is_davinci_dm644x()) + davinci_def_priorities = dm644x_default_priorities; + else if (cpu_is_davinci_dm646x()) + davinci_def_priorities = dm646x_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); @@ -211,8 +284,8 @@ void __init davinci_irq_init(void) unsigned j; u32 pri; - for (j = 0, pri = 0; j < 32; j += 4, priority++) - pri |= (*priority & 0x07) << j; + for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) + pri |= (*davinci_def_priorities & 0x07) << j; davinci_irq_writel(pri, i); } -- cgit v0.10.2 From f9337405b21bafb1c1a24316b3e43b3d3d697925 Mon Sep 17 00:00:00 2001 From: "s-paulraj@ti.com" Date: Thu, 18 Sep 2008 15:35:00 -0400 Subject: davinci: DM355 IRQ Definitions Adding IRQ defintions for DaVinci DM355 and default interrupt priorities for DM355 Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 9b0e412..1806607 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -152,4 +152,55 @@ #define IRQ_DM646X_DDRINT 59 #define IRQ_DM646X_AEMIFINT 60 +/* DaVinci DM355-specific Interrupts */ +#define IRQ_DM355_CCDC_VDINT0 0 +#define IRQ_DM355_CCDC_VDINT1 1 +#define IRQ_DM355_CCDC_VDINT2 2 +#define IRQ_DM355_IPIPE_HST 3 +#define IRQ_DM355_H3AINT 4 +#define IRQ_DM355_IPIPE_SDR 5 +#define IRQ_DM355_IPIPEIFINT 6 +#define IRQ_DM355_OSDINT 7 +#define IRQ_DM355_VENCINT 8 +#define IRQ_DM355_IMCOPINT 11 +#define IRQ_DM355_RTOINT 13 +#define IRQ_DM355_TINT4 13 +#define IRQ_DM355_TINT2_TINT12 13 +#define IRQ_DM355_UARTINT2 14 +#define IRQ_DM355_TINT5 14 +#define IRQ_DM355_TINT2_TINT34 14 +#define IRQ_DM355_TINT6 15 +#define IRQ_DM355_TINT3_TINT12 15 +#define IRQ_DM355_SPINT1_0 17 +#define IRQ_DM355_SPINT1_1 18 +#define IRQ_DM355_SPINT2_0 19 +#define IRQ_DM355_SPINT2_1 21 +#define IRQ_DM355_TINT7 22 +#define IRQ_DM355_TINT3_TINT34 22 +#define IRQ_DM355_SDIOINT0 23 +#define IRQ_DM355_MMCINT0 26 +#define IRQ_DM355_MSINT 26 +#define IRQ_DM355_MMCINT1 27 +#define IRQ_DM355_PWMINT3 28 +#define IRQ_DM355_SDIOINT1 31 +#define IRQ_DM355_SPINT0_0 42 +#define IRQ_DM355_SPINT0_1 43 +#define IRQ_DM355_GPIO0 44 +#define IRQ_DM355_GPIO1 45 +#define IRQ_DM355_GPIO2 46 +#define IRQ_DM355_GPIO3 47 +#define IRQ_DM355_GPIO4 48 +#define IRQ_DM355_GPIO5 49 +#define IRQ_DM355_GPIO6 50 +#define IRQ_DM355_GPIO7 51 +#define IRQ_DM355_GPIO8 52 +#define IRQ_DM355_GPIO9 53 +#define IRQ_DM355_GPIOBNK0 54 +#define IRQ_DM355_GPIOBNK1 55 +#define IRQ_DM355_GPIOBNK2 56 +#define IRQ_DM355_GPIOBNK3 57 +#define IRQ_DM355_GPIOBNK4 58 +#define IRQ_DM355_GPIOBNK5 59 +#define IRQ_DM355_GPIOBNK6 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index cf08ef2..5a324c9 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -248,6 +248,71 @@ static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_EMUINT] = 7, }; +static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { @@ -257,6 +322,8 @@ void __init davinci_irq_init(void) davinci_def_priorities = dm644x_default_priorities; else if (cpu_is_davinci_dm646x()) davinci_def_priorities = dm646x_default_priorities; + else if (cpu_is_davinci_dm355()) + davinci_def_priorities = dm355_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); -- cgit v0.10.2 From 617b925f94e0126841164ffd40dd3a8879502b57 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 08:04:26 -0500 Subject: davinci: serial: generalize for more SoCs Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index fb8cb22..632847d 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -13,8 +13,23 @@ #include -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) +#define DAVINCI_MAX_NR_UARTS 3 +#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) +#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) +#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* DaVinci UART register offsets */ +#define UART_DAVINCI_PWREMU 0x0c +#define UART_DM646X_SCR 0x10 +#define UART_DM646X_SCR_TX_WATERMARK 0x08 + +struct davinci_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +extern void davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 3010f99..6950757 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -32,32 +32,47 @@ #include #include #include +#include +#include "clock.h" -#define UART_DAVINCI_PWREMU 0x0c - -static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up, - int offset) +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) { offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset); } -static inline void davinci_serial_outp(struct plat_serial8250_port *p, - int offset, int value) +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) { offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE), - .mapbase = (unsigned long)DAVINCI_UART0_BASE, + .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = 27000000, }, { .flags = 0 @@ -74,22 +89,68 @@ static struct platform_device serial_device = { static void __init davinci_serial_reset(struct plat_serial8250_port *p) { - /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ unsigned int pwremu = 0; - davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */ + serial_write_reg(p, UART_IER, 0); /* disable all interrupts */ - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); mdelay(10); pwremu |= (0x3 << 13); pwremu |= 0x1; - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); + + if (cpu_is_davinci_dm646x()) + serial_write_reg(p, UART_DM646X_SCR, + UART_DM646X_SCR_TX_WATERMARK); +} + +void __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i; + char name[16]; + struct clk *uart_clk; + struct device *dev = &serial_device.dev; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->flags = 0; + continue; + } + + if (cpu_is_davinci_dm646x()) + p->iotype = UPIO_MEM32; + + if (cpu_is_davinci_dm355()) { + if (i == 2) { + p->mapbase = (unsigned long)DM355_UART2_BASE; + p->irq = IRQ_DM355_UARTINT2; + } + } + + sprintf(name, "uart%d", i); + uart_clk = clk_get(dev, name); + if (IS_ERR(uart_clk)) + printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, i); + else { + clk_enable(uart_clk); + p->uartclk = clk_get_rate(uart_clk); + davinci_serial_reset(p); + } + } } static int __init davinci_init(void) { - davinci_serial_reset(&serial_platform_data[0]); return platform_device_register(&serial_device); } -- cgit v0.10.2 From 5526b3f7e3317bdd0dcc0483214935ae64236efb Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 09:50:37 -0500 Subject: davinci: update pin-multiplexing support Update MUX support to be more general and useful across multiple SoCs in the DaVinci family. Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index af88673..f18090e 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -18,6 +18,32 @@ config MACH_DAVINCI_EVM Configure this option to specify the whether the board used for development is a DaVinci EVM + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + config DAVINCI_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 3ee3d73..b27871a 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,9 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o dma.o usb.o + gpio.o devices.o dma.o usb.o + +obj-$(CONFIG_DAVINCI_MUX) += mux.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 3ea6d47..a31370b 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #define DAVINCI_I2C_BASE 0x01C21000 @@ -45,6 +47,9 @@ static struct platform_device davinci_i2c_device = { void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) { + if (cpu_is_davinci_dm644x()) + davinci_cfg_reg(DM644X_I2C); + davinci_i2c_device.dev.platform_data = pdata; (void) platform_device_register(&davinci_i2c_device); } diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index c24b678..bae22cb 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -1,55 +1,183 @@ /* - * DaVinci pin multiplexing defines + * Table of the DAVINCI register configurations for the PINMUX combinations * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/include/asm-arm/arch-omap/mux.h: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) - -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); - -#endif /* __ASM_ARCH_MUX_H */ + +#ifndef __INC_MACH_MUX_H +#define __INC_MACH_MUX_H + +/* System module registers */ +#define PINMUX0 0x00 +#define PINMUX1 0x04 +/* dm355 only */ +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +struct mux_config { + const char *name; + const char *mux_reg_name; + const unsigned char mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + const unsigned char mode; + bool debug; +}; + +enum davinci_dm644x_index { + /* ATA and HDDIR functions */ + DM644X_HDIREN, + DM644X_ATAEN, + DM644X_ATAEN_DISABLE, + + /* HPI functions */ + DM644X_HPIEN_DISABLE, + + /* AEAW functions */ + DM644X_AEAW, + + /* Memory Stick */ + DM644X_MSTK, + + /* I2C */ + DM644X_I2C, + + /* ASP function */ + DM644X_MCBSP, + + /* UART1 */ + DM644X_UART1, + + /* UART2 */ + DM644X_UART2, + + /* PWM0 */ + DM644X_PWM0, + + /* PWM1 */ + DM644X_PWM1, + + /* PWM2 */ + DM644X_PWM2, + + /* VLYNQ function */ + DM644X_VLYNQEN, + DM644X_VLSCREN, + DM644X_VLYNQWD, + + /* EMAC and MDIO function */ + DM644X_EMACEN, + + /* GPIO3V[0:16] pins */ + DM644X_GPIO3V, + + /* GPIO pins */ + DM644X_GPIO0, + DM644X_GPIO3, + DM644X_GPIO43_44, + DM644X_GPIO46_47, + + /* VPBE */ + DM644X_RGB666, + + /* LCD */ + DM644X_LOEEN, + DM644X_LFLDEN, +}; + +enum davinci_dm646x_index { + /* ATA function */ + DM646X_ATAEN, + + /* AUDIO Clock */ + DM646X_AUDCK1, + DM646X_AUDCK0, + + /* CRGEN Control */ + DM646X_CRGMUX, + + /* VPIF Control */ + DM646X_STSOMUX_DISABLE, + DM646X_STSIMUX_DISABLE, + DM646X_PTSOMUX_DISABLE, + DM646X_PTSIMUX_DISABLE, + + /* TSIF Control */ + DM646X_STSOMUX, + DM646X_STSIMUX, + DM646X_PTSOMUX_PARALLEL, + DM646X_PTSIMUX_PARALLEL, + DM646X_PTSOMUX_SERIAL, + DM646X_PTSIMUX_SERIAL, +}; + +enum davinci_dm355_index { + /* MMC/SD 0 */ + DM355_MMCSD0, + + /* MMC/SD 1 */ + DM355_SD1_CLK, + DM355_SD1_CMD, + DM355_SD1_DATA3, + DM355_SD1_DATA2, + DM355_SD1_DATA1, + DM355_SD1_DATA0, + + /* I2C */ + DM355_I2C_SDA, + DM355_I2C_SCL, + + /* ASP0 function */ + DM355_MCBSP0_BDX, + DM355_MCBSP0_X, + DM355_MCBSP0_BFSX, + DM355_MCBSP0_BDR, + DM355_MCBSP0_R, + DM355_MCBSP0_BFSR, + + /* SPI0 */ + DM355_SPI0_SDI, + DM355_SPI0_SDENA0, + DM355_SPI0_SDENA1, + + /* IRQ muxing */ + DM355_INT_EDMA_CC, + DM355_INT_EDMA_TC0_ERR, + DM355_INT_EDMA_TC1_ERR, + + /* EDMA event muxing */ + DM355_EVT8_ASP1_TX, + DM355_EVT9_ASP1_RX, + DM355_EVT26_MMC0_RX, +}; + +#ifdef CONFIG_DAVINCI_MUX +/* setup pin muxing */ +extern void davinci_mux_init(void); +extern int davinci_mux_register(const struct mux_config *pins, + unsigned long size); +extern int davinci_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ +static inline void davinci_mux_init(void) {} +static inline int davinci_mux_register(const struct mux_config *pins, + unsigned long size) { return 0; } +static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif /* __INC_MACH_MUX_H */ diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 53734de..bbba0b2 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -1,42 +1,103 @@ /* - * DaVinci pin multiplexing configurations + * Utility to set the DAVINCI MUX register from a table in mux.h * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/arch/arm/plat-omap/mux.c: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ #include +#include #include #include - #include -/* System control register offsets */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 +static const struct mux_config *mux_table; +static unsigned long pin_table_sz; + +int __init davinci_mux_register(const struct mux_config *pins, + unsigned long size) +{ + mux_table = pins; + pin_table_sz = size; -static DEFINE_SPINLOCK(mux_lock); + return 0; +} -void davinci_mux_peripheral(unsigned int mux, unsigned int enable) +/* + * Sets the DAVINCI MUX register based on the table + */ +int __init_or_module davinci_cfg_reg(const unsigned long index) { + static DEFINE_SPINLOCK(mux_spin_lock); void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); - u32 pinmux, muxreg = PINMUX0; + unsigned long flags; + const struct mux_config *cfg; + unsigned int reg_orig = 0, reg = 0; + unsigned int mask, warn = 0; + + if (!mux_table) + BUG(); + + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; + } + + cfg = &mux_table[index]; + + if (cfg->name == NULL) { + printk(KERN_ERR "No entry for the specified index\n"); + return -ENODEV; + } + + /* Update the mux register in question */ + if (cfg->mask) { + unsigned tmp1, tmp2; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg_orig = __raw_readl(base + cfg->mux_reg); + + mask = (cfg->mask << cfg->mask_offset); + tmp1 = reg_orig & mask; + reg = reg_orig & ~mask; + + tmp2 = (cfg->mode << cfg->mask_offset); + reg |= tmp2; + + if (tmp1 != tmp2) + warn = 1; + + __raw_writel(reg, base + cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + if (warn) { +#ifdef CONFIG_DAVINCI_MUX_WARNINGS + printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); +#endif + } - if (mux >= DAVINCI_MUX_LEVEL2) { - muxreg = PINMUX1; - mux -= DAVINCI_MUX_LEVEL2; +#ifdef CONFIG_DAVINCI_MUX_DEBUG + if (cfg->debug || warn) { + printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name); + printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); } +#endif - spin_lock(&mux_lock); - pinmux = __raw_readl(base + muxreg); - if (enable) - pinmux |= (1 << mux); - else - pinmux &= ~(1 << mux); - __raw_writel(pinmux, base + muxreg); - spin_unlock(&mux_lock); + return 0; } +EXPORT_SYMBOL(davinci_cfg_reg); diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h new file mode 100644 index 0000000..adc8694 --- /dev/null +++ b/arch/arm/mach-davinci/mux.h @@ -0,0 +1,51 @@ +/* + * Pin-multiplex helper macros for TI DaVinci family devices + * + * Author: Vladimir Barinov, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2008 Texas Instruments. + */ +#ifndef _MACH_DAVINCI_MUX_H_ +#define _MACH_DAVINCI_MUX_H_ + +#include + +#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "PINMUX"#muxreg, \ + .mux_reg = PINMUX##muxreg, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "INTMUX", \ + .mux_reg = INTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "EVTMUX", \ + .mux_reg = EVTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#endif /* _MACH_DAVINCI_MUX_H */ -- cgit v0.10.2 From 73d3c68f09e608be983013dc8b3e49aebe89298c Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 10:57:40 -0500 Subject: davinci: DM644x: rename board file Rename DM6446 EVM board file, no functional changes. Code is updated and reworked in following patch. Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c new file mode 100644 index 0000000..c2701d7 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -0,0 +1,440 @@ +/* + * TI DaVinci EVM board support + * + * Author: Kevin Hilman, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include +#include + +#define DAVINCI_CFC_ATA_BASE 0x01C66000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* other misc. init functions */ +void __init davinci_psc_init(void); +void __init davinci_irq_init(void); +void __init davinci_map_common_io(void); +void __init davinci_init_common_hw(void); + +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) + +static struct mtd_partition davinci_evm_norflash_partitions[] = { + /* bootloader (U-Boot, etc) in first 4 sectors */ + { + .name = "bootloader", + .offset = 0, + .size = 4 * SZ_64K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next 1 sectors */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct physmap_flash_data davinci_evm_norflash_data = { + .width = 2, + .parts = davinci_evm_norflash_partitions, + .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), +}; + +/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF + * limits addresses to 16M, so using addresses past 16M will wrap */ +static struct resource davinci_evm_norflash_resource = { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device davinci_evm_norflash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &davinci_evm_norflash_data, + }, + .num_resources = 1, + .resource = &davinci_evm_norflash_resource, +}; + +#endif + +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) + +static struct resource ide_resources[] = { + { + .start = DAVINCI_CFC_ATA_BASE, + .end = DAVINCI_CFC_ATA_BASE + 0x7ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_IDE, + .end = IRQ_IDE, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ide_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device ide_dev = { + .name = "palm_bk3710", + .id = -1, + .resource = ide_resources, + .num_resources = ARRAY_SIZE(ide_resources), + .dev = { + .dma_mask = &ide_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +#endif + +/*----------------------------------------------------------------------*/ + +/* + * I2C GPIO expanders + */ + +#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) + + +/* U2 -- LEDs */ + +static struct gpio_led evm_leds[] = { + { .name = "DS8", .active_low = 1, + .default_trigger = "heartbeat", }, + { .name = "DS7", .active_low = 1, }, + { .name = "DS6", .active_low = 1, }, + { .name = "DS5", .active_low = 1, }, + { .name = "DS4", .active_low = 1, }, + { .name = "DS3", .active_low = 1, }, + { .name = "DS2", .active_low = 1, + .default_trigger = "mmc0", }, + { .name = "DS1", .active_low = 1, + .default_trigger = "ide-disk", }, +}; + +static const struct gpio_led_platform_data evm_led_data = { + .num_leds = ARRAY_SIZE(evm_leds), + .leds = evm_leds, +}; + +static struct platform_device *evm_led_dev; + +static int +evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + struct gpio_led *leds = evm_leds; + int status; + + while (ngpio--) { + leds->gpio = gpio++; + leds++; + } + + /* what an extremely annoying way to be forced to handle + * device unregistration ... + */ + evm_led_dev = platform_device_alloc("leds-gpio", 0); + platform_device_add_data(evm_led_dev, + &evm_led_data, sizeof evm_led_data); + + evm_led_dev->dev.parent = &client->dev; + status = platform_device_add(evm_led_dev); + if (status < 0) { + platform_device_put(evm_led_dev); + evm_led_dev = NULL; + } + return status; +} + +static int +evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + if (evm_led_dev) { + platform_device_unregister(evm_led_dev); + evm_led_dev = NULL; + } + return 0; +} + +static struct pcf857x_platform_data pcf_data_u2 = { + .gpio_base = PCF_Uxx_BASE(0), + .setup = evm_led_setup, + .teardown = evm_led_teardown, +}; + + +/* U18 - A/V clock generator and user switch */ + +static int sw_gpio; + +static ssize_t +sw_show(struct device *d, struct device_attribute *a, char *buf) +{ + char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; + + strcpy(buf, s); + return strlen(s); +} + +static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); + +static int +evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + int status; + + /* export dip switch option */ + sw_gpio = gpio + 7; + status = gpio_request(sw_gpio, "user_sw"); + if (status == 0) + status = gpio_direction_input(sw_gpio); + if (status == 0) + status = device_create_file(&client->dev, &dev_attr_user_sw); + else + gpio_free(sw_gpio); + if (status != 0) + sw_gpio = -EINVAL; + + /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ + gpio_request(gpio + 3, "pll_fs2"); + gpio_direction_output(gpio + 3, 0); + + gpio_request(gpio + 2, "pll_fs1"); + gpio_direction_output(gpio + 2, 0); + + gpio_request(gpio + 1, "pll_sr"); + gpio_direction_output(gpio + 1, 0); + + return 0; +} + +static int +evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + gpio_free(gpio + 1); + gpio_free(gpio + 2); + gpio_free(gpio + 3); + + if (sw_gpio > 0) { + device_remove_file(&client->dev, &dev_attr_user_sw); + gpio_free(sw_gpio); + } + return 0; +} + +static struct pcf857x_platform_data pcf_data_u18 = { + .gpio_base = PCF_Uxx_BASE(1), + .n_latch = (1 << 3) | (1 << 2) | (1 << 1), + .setup = evm_u18_setup, + .teardown = evm_u18_teardown, +}; + + +/* U35 - various I/O signals used to manage USB, CF, ATA, etc */ + +static int +evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + /* p0 = nDRV_VBUS (initial: don't supply it) */ + gpio_request(gpio + 0, "nDRV_VBUS"); + gpio_direction_output(gpio + 0, 1); + + /* p1 = VDDIMX_EN */ + gpio_request(gpio + 1, "VDDIMX_EN"); + gpio_direction_output(gpio + 1, 1); + + /* p2 = VLYNQ_EN */ + gpio_request(gpio + 2, "VLYNQ_EN"); + gpio_direction_output(gpio + 2, 1); + + /* p3 = n3V3_CF_RESET (initial: stay in reset) */ + gpio_request(gpio + 3, "nCF_RESET"); + gpio_direction_output(gpio + 3, 0); + + /* (p4 unused) */ + + /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ + gpio_request(gpio + 5, "WLAN_RESET"); + gpio_direction_output(gpio + 5, 1); + + /* p6 = nATA_SEL (initial: select) */ + gpio_request(gpio + 6, "nATA_SEL"); + gpio_direction_output(gpio + 6, 0); + + /* p7 = nCF_SEL (initial: deselect) */ + gpio_request(gpio + 7, "nCF_SEL"); + gpio_direction_output(gpio + 7, 1); + + /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + setup_usb(500, 8); + + return 0; +} + +static int +evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + gpio_free(gpio + 7); + gpio_free(gpio + 6); + gpio_free(gpio + 5); + gpio_free(gpio + 3); + gpio_free(gpio + 2); + gpio_free(gpio + 1); + gpio_free(gpio + 0); + return 0; +} + +static struct pcf857x_platform_data pcf_data_u35 = { + .gpio_base = PCF_Uxx_BASE(2), + .setup = evm_u35_setup, + .teardown = evm_u35_teardown, +}; + +/*----------------------------------------------------------------------*/ + +/* Most of this EEPROM is unused, but U-Boot uses some data: + * - 0x7f00, 6 bytes Ethernet Address + * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) + * - ... newer boards may have more + */ +static struct at24_platform_data eeprom_info = { + .byte_len = (256*1024) / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("pcf8574", 0x38), + .platform_data = &pcf_data_u2, + }, + { + I2C_BOARD_INFO("pcf8574", 0x39), + .platform_data = &pcf_data_u18, + }, + { + I2C_BOARD_INFO("pcf8574", 0x3a), + .platform_data = &pcf_data_u35, + }, + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &eeprom_info, + }, + /* ALSO: + * - tvl320aic33 audio codec (0x1b) + * - msp430 microcontroller (0x23) + * - tvp5146 video decoder (0x5d) + */ +}; + +/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), + * which requires 100 usec of idle bus after i2c writes sent to it. + */ +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static struct platform_device *davinci_evm_devices[] __initdata = { +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) + &davinci_evm_norflash_device, +#endif +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) + &ide_dev, +#endif +}; + +static void __init +davinci_evm_map_io(void) +{ + davinci_map_common_io(); +} + +static __init void davinci_evm_init(void) +{ +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) + printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " + "but share pins.\n\t Disable IDE for NOR support.\n"); +#endif +#endif + + platform_add_devices(davinci_evm_devices, + ARRAY_SIZE(davinci_evm_devices)); + evm_init_i2c(); +} + +static __init void davinci_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_EVM, "DaVinci EVM") + /* Maintainer: MontaVista Software */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_evm_map_io, + .init_irq = davinci_evm_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_evm_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c deleted file mode 100644 index c2701d7..0000000 --- a/arch/arm/mach-davinci/board-evm.c +++ /dev/null @@ -1,440 +0,0 @@ -/* - * TI DaVinci EVM board support - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include -#include - -#define DAVINCI_CFC_ATA_BASE 0x01C66000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 - -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); - -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - -static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ - { - .name = "bootloader", - .offset = 0, - .size = 4 * SZ_64K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next 1 sectors */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data davinci_evm_norflash_data = { - .width = 2, - .parts = davinci_evm_norflash_partitions, - .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), -}; - -/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF - * limits addresses to 16M, so using addresses past 16M will wrap */ -static struct resource davinci_evm_norflash_resource = { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device davinci_evm_norflash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &davinci_evm_norflash_data, - }, - .num_resources = 1, - .resource = &davinci_evm_norflash_resource, -}; - -#endif - -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - -static struct resource ide_resources[] = { - { - .start = DAVINCI_CFC_ATA_BASE, - .end = DAVINCI_CFC_ATA_BASE + 0x7ff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_IDE, - .end = IRQ_IDE, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ide_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ide_dev = { - .name = "palm_bk3710", - .id = -1, - .resource = ide_resources, - .num_resources = ARRAY_SIZE(ide_resources), - .dev = { - .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#endif - -/*----------------------------------------------------------------------*/ - -/* - * I2C GPIO expanders - */ - -#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) - - -/* U2 -- LEDs */ - -static struct gpio_led evm_leds[] = { - { .name = "DS8", .active_low = 1, - .default_trigger = "heartbeat", }, - { .name = "DS7", .active_low = 1, }, - { .name = "DS6", .active_low = 1, }, - { .name = "DS5", .active_low = 1, }, - { .name = "DS4", .active_low = 1, }, - { .name = "DS3", .active_low = 1, }, - { .name = "DS2", .active_low = 1, - .default_trigger = "mmc0", }, - { .name = "DS1", .active_low = 1, - .default_trigger = "ide-disk", }, -}; - -static const struct gpio_led_platform_data evm_led_data = { - .num_leds = ARRAY_SIZE(evm_leds), - .leds = evm_leds, -}; - -static struct platform_device *evm_led_dev; - -static int -evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - struct gpio_led *leds = evm_leds; - int status; - - while (ngpio--) { - leds->gpio = gpio++; - leds++; - } - - /* what an extremely annoying way to be forced to handle - * device unregistration ... - */ - evm_led_dev = platform_device_alloc("leds-gpio", 0); - platform_device_add_data(evm_led_dev, - &evm_led_data, sizeof evm_led_data); - - evm_led_dev->dev.parent = &client->dev; - status = platform_device_add(evm_led_dev); - if (status < 0) { - platform_device_put(evm_led_dev); - evm_led_dev = NULL; - } - return status; -} - -static int -evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - if (evm_led_dev) { - platform_device_unregister(evm_led_dev); - evm_led_dev = NULL; - } - return 0; -} - -static struct pcf857x_platform_data pcf_data_u2 = { - .gpio_base = PCF_Uxx_BASE(0), - .setup = evm_led_setup, - .teardown = evm_led_teardown, -}; - - -/* U18 - A/V clock generator and user switch */ - -static int sw_gpio; - -static ssize_t -sw_show(struct device *d, struct device_attribute *a, char *buf) -{ - char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; - - strcpy(buf, s); - return strlen(s); -} - -static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); - -static int -evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - int status; - - /* export dip switch option */ - sw_gpio = gpio + 7; - status = gpio_request(sw_gpio, "user_sw"); - if (status == 0) - status = gpio_direction_input(sw_gpio); - if (status == 0) - status = device_create_file(&client->dev, &dev_attr_user_sw); - else - gpio_free(sw_gpio); - if (status != 0) - sw_gpio = -EINVAL; - - /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ - gpio_request(gpio + 3, "pll_fs2"); - gpio_direction_output(gpio + 3, 0); - - gpio_request(gpio + 2, "pll_fs1"); - gpio_direction_output(gpio + 2, 0); - - gpio_request(gpio + 1, "pll_sr"); - gpio_direction_output(gpio + 1, 0); - - return 0; -} - -static int -evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 1); - gpio_free(gpio + 2); - gpio_free(gpio + 3); - - if (sw_gpio > 0) { - device_remove_file(&client->dev, &dev_attr_user_sw); - gpio_free(sw_gpio); - } - return 0; -} - -static struct pcf857x_platform_data pcf_data_u18 = { - .gpio_base = PCF_Uxx_BASE(1), - .n_latch = (1 << 3) | (1 << 2) | (1 << 1), - .setup = evm_u18_setup, - .teardown = evm_u18_teardown, -}; - - -/* U35 - various I/O signals used to manage USB, CF, ATA, etc */ - -static int -evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - /* p0 = nDRV_VBUS (initial: don't supply it) */ - gpio_request(gpio + 0, "nDRV_VBUS"); - gpio_direction_output(gpio + 0, 1); - - /* p1 = VDDIMX_EN */ - gpio_request(gpio + 1, "VDDIMX_EN"); - gpio_direction_output(gpio + 1, 1); - - /* p2 = VLYNQ_EN */ - gpio_request(gpio + 2, "VLYNQ_EN"); - gpio_direction_output(gpio + 2, 1); - - /* p3 = n3V3_CF_RESET (initial: stay in reset) */ - gpio_request(gpio + 3, "nCF_RESET"); - gpio_direction_output(gpio + 3, 0); - - /* (p4 unused) */ - - /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ - gpio_request(gpio + 5, "WLAN_RESET"); - gpio_direction_output(gpio + 5, 1); - - /* p6 = nATA_SEL (initial: select) */ - gpio_request(gpio + 6, "nATA_SEL"); - gpio_direction_output(gpio + 6, 0); - - /* p7 = nCF_SEL (initial: deselect) */ - gpio_request(gpio + 7, "nCF_SEL"); - gpio_direction_output(gpio + 7, 1); - - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ - setup_usb(500, 8); - - return 0; -} - -static int -evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 7); - gpio_free(gpio + 6); - gpio_free(gpio + 5); - gpio_free(gpio + 3); - gpio_free(gpio + 2); - gpio_free(gpio + 1); - gpio_free(gpio + 0); - return 0; -} - -static struct pcf857x_platform_data pcf_data_u35 = { - .gpio_base = PCF_Uxx_BASE(2), - .setup = evm_u35_setup, - .teardown = evm_u35_teardown, -}; - -/*----------------------------------------------------------------------*/ - -/* Most of this EEPROM is unused, but U-Boot uses some data: - * - 0x7f00, 6 bytes Ethernet Address - * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) - * - ... newer boards may have more - */ -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info __initdata i2c_info[] = { - { - I2C_BOARD_INFO("pcf8574", 0x38), - .platform_data = &pcf_data_u2, - }, - { - I2C_BOARD_INFO("pcf8574", 0x39), - .platform_data = &pcf_data_u18, - }, - { - I2C_BOARD_INFO("pcf8574", 0x3a), - .platform_data = &pcf_data_u35, - }, - { - I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, - }, - /* ALSO: - * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) - * - tvp5146 video decoder (0x5d) - */ -}; - -/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), - * which requires 100 usec of idle bus after i2c writes sent to it. - */ -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static void __init evm_init_i2c(void) -{ - davinci_init_i2c(&i2c_pdata); - i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); -} - -static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif -}; - -static void __init -davinci_evm_map_io(void) -{ - davinci_map_common_io(); -} - -static __init void davinci_evm_init(void) -{ -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); -#endif -#endif - - platform_add_devices(davinci_evm_devices, - ARRAY_SIZE(davinci_evm_devices)); - evm_init_i2c(); -} - -static __init void davinci_evm_irq_init(void) -{ - davinci_irq_init(); -} - -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") - /* Maintainer: MontaVista Software */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, - .boot_params = (DAVINCI_DDR_BASE + 0x100), - .map_io = davinci_evm_map_io, - .init_irq = davinci_evm_irq_init, - .timer = &davinci_timer, - .init_machine = davinci_evm_init, -MACHINE_END -- cgit v0.10.2 From d0e47fba054a55e0066c6ae2c807d98d086af5a9 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 11:30:11 -0500 Subject: davinci: update DM644x support in preparation for more SoCs Rework DM644x code into SoC specific and board specific parts. This is also to generalize the structure a bit so it's easier to add support for new SoCs in the DaVinci family. Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index f18090e..a9c78bc 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,19 +4,18 @@ menu "TI DaVinci Implementations" comment "DaVinci Core Type" -config ARCH_DAVINCI644x - default y +config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" comment "DaVinci Board Type" config MACH_DAVINCI_EVM - bool "TI DaVinci EVM" + bool "TI DM644x EVM" default y - depends on ARCH_DAVINCI644x + depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used - for development is a DaVinci EVM + for development is a DM644x EVM config DAVINCI_MUX diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index b27871a..1674661 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -9,5 +9,8 @@ obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ obj-$(CONFIG_DAVINCI_MUX) += mux.o +# Chip specific +obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o + # Board specific -obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o +obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index c2701d7..5387e6b 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -15,15 +15,19 @@ #include #include #include +#include #include #include #include - +#include #include +#include #include #include #include +#include +#include #include #include @@ -32,28 +36,34 @@ #include #include -#include +#include #include #include +#include +#include +#include +#include + +#define DM644X_EVM_PHY_MASK (0x2) +#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ #define DAVINCI_CFC_ATA_BASE 0x01C66000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) +#define LXT971_PHY_ID (0x001378e2) +#define LXT971_PHY_MASK (0xfffffff0) static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ + /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ { .name = "bootloader", .offset = 0, - .size = 4 * SZ_64K, + .size = 5 * SZ_64K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next 1 sectors */ @@ -103,10 +113,60 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; -#endif +struct mtd_partition davinci_evm_nandflash_partition[] = { + /* 5 MB space at the beginning for bootloader and kernel */ + { + .name = "NAND filesystem", + .offset = 5 * SZ_1M, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +static struct davinci_nand_pdata davinci_evm_nandflash_data = { + .parts = davinci_evm_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), + .ecc_mode = NAND_ECC_HW, +}; + +static struct resource davinci_evm_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_evm_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_32BIT_MASK; + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = 0, +}; + +static struct platform_device rtc_dev = { + .name = "rtc_davinci_evm", + .id = -1, +}; static struct resource ide_resources[] = { { @@ -121,7 +181,7 @@ static struct resource ide_resources[] = { }, }; -static u64 ide_dma_mask = DMA_BIT_MASK(32); +static u64 ide_dma_mask = DMA_32BIT_MASK; static struct platform_device ide_dev = { .name = "palm_bk3710", @@ -130,12 +190,10 @@ static struct platform_device ide_dev = { .num_resources = ARRAY_SIZE(ide_resources), .dev = { .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), + .coherent_dma_mask = DMA_32BIT_MASK, }, }; -#endif - /*----------------------------------------------------------------------*/ /* @@ -314,7 +372,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + /* irlml6401 switches over 1A, in under 8 msec; + * now it can be managed by nDRV_VBUS ... + */ setup_usb(500, 8); return 0; @@ -346,14 +406,120 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ +static struct memory_accessor *at24_mem_acc; + +static void at24_setup(struct memory_accessor *mem_acc, void *context) +{ + DECLARE_MAC_BUF(mac_str); + char mac_addr[6]; + + at24_mem_acc = mem_acc; + + /* Read MAC addr from EEPROM */ + if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { + printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", + print_mac(mac_str, mac_addr)); + } +} + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, + .setup = at24_setup, +}; + +int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->read(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_read); + +int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->write(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_write); + +/* + * MSP430 supports RTC, card detection, input from IR remote, and + * a bit more. It triggers interrupts on GPIO(7) from pressing + * buttons on the IR remote, and for card detect switches. + */ +static struct i2c_client *dm6446evm_msp; + +static int dm6446evm_msp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + dm6446evm_msp = client; + return 0; +} + +static int dm6446evm_msp_remove(struct i2c_client *client) +{ + dm6446evm_msp = NULL; + return 0; +} + +static const struct i2c_device_id dm6446evm_msp_ids[] = { + { "dm6446evm_msp", 0, }, + { /* end of list */ }, +}; + +static struct i2c_driver dm6446evm_msp_driver = { + .driver.name = "dm6446evm_msp", + .id_table = dm6446evm_msp_ids, + .probe = dm6446evm_msp_probe, + .remove = dm6446evm_msp_remove, }; +static int dm6444evm_msp430_get_pins(void) +{ + static const char txbuf[2] = { 2, 4, }; + char buf[4]; + struct i2c_msg msg[2] = { + { + .addr = dm6446evm_msp->addr, + .flags = 0, + .len = 2, + .buf = (void __force *)txbuf, + }, + { + .addr = dm6446evm_msp->addr, + .flags = I2C_M_RD, + .len = 4, + .buf = buf, + }, + }; + int status; + + if (!dm6446evm_msp) + return -ENXIO; + + /* Command 4 == get input state, returns port 2 and port3 data + * S Addr W [A] len=2 [A] cmd=4 [A] + * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P + */ + status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); + if (status < 0) + return status; + + dev_dbg(&dm6446evm_msp->dev, + "PINS: %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3]); + + return (buf[3] << 8) | buf[2]; +} + static struct i2c_board_info __initdata i2c_info[] = { { + I2C_BOARD_INFO("dm6446evm_msp", 0x23), + }, + { I2C_BOARD_INFO("pcf8574", 0x38), .platform_data = &pcf_data_u2, }, @@ -371,7 +537,6 @@ static struct i2c_board_info __initdata i2c_info[] = { }, /* ALSO: * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) * - tvp5146 video decoder (0x5d) */ }; @@ -387,40 +552,101 @@ static struct davinci_i2c_platform_data i2c_pdata = { static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif + &davinci_fb_device, + &rtc_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), }; static void __init davinci_evm_map_io(void) { davinci_map_common_io(); + dm644x_init(); } -static __init void davinci_evm_init(void) +static int davinci_phy_fixup(struct phy_device *phydev) { + unsigned int control; + /* CRITICAL: Fix for increasing PHY signal drive strength for + * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY + * signal strength was low causing TX to fail randomly. The + * fix is to Set bit 11 (Increased MII drive strength) of PHY + * register 26 (Digital Config register) on this phy. */ + control = phy_read(phydev, 26); + phy_write(phydev, 26, (control | 0x800)); + return 0; +} + #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + #if defined(CONFIG_MTD_PHYSMAP) || \ defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); +#define HAS_NOR 1 +#else +#define HAS_NOR 0 #endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 #endif +static __init void davinci_evm_init(void) +{ + struct clk *aemif_clk; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND || HAS_NOR) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND || HAS_NOR) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) { + platform_device_register(&davinci_evm_nandflash_device); + evm_leds[7].default_trigger = "nand-disk"; + if (HAS_NOR) + pr_warning("WARNING: both NAND and NOR flash " + "are enabled; disable one of them.\n"); + } else if (HAS_NOR) + platform_device_register(&davinci_evm_norflash_device); + } + platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + + davinci_serial_init(&uart_config); + + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } static __init void davinci_evm_irq_init(void) @@ -428,7 +654,7 @@ static __init void davinci_evm_irq_init(void) davinci_irq_init(); } -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") +MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software */ .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c new file mode 100644 index 0000000..d428ef1 --- /dev/null +++ b/arch/arm/mach-davinci/dm644x.c @@ -0,0 +1,461 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM644X_REF_FREQ 27000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM644X_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclk2 = { + .name = "pll2_sysclk2", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_GEM, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vicp_clk = { + .name = "vicp", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_IMCOP, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk ide_clk = { + .name = "ide", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_ATA, +}; + +static struct clk asp_clk = { + .name = "asp0", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk mmcsd_clk = { + .name = "mmcsd", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk spi_clk = { + .name = "spi", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct clk vlynq_clk = { + .name = "vlynq", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VLYNQ, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +struct davinci_clk dm644x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "vicp", &vicp_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("palm_bk3710", NULL, &ide_clk), + CLK("soc-audio.0", NULL, &asp_clk), + CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK(NULL, "spi", &spi_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, "vlynq", &vlynq_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, NULL, NULL), +}; + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +static struct resource dm644x_emac_resources[] = { + { + .start = DM644X_EMAC_BASE, + .end = DM644X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EMACINT, + .end = IRQ_EMACINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_emac_device = { + .name = "davinci_emac", + .id = 1, + .num_resources = ARRAY_SIZE(dm644x_emac_resources), + .resource = dm644x_emac_resources, +}; + +#endif + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm644x_pins[] = { +MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) +MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) +MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) + +MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) + +MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) + +MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) + +MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false) + +MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false) + +MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true) +MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true) + +MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false) + +MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false) + +MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false) + +MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false) +MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false) +MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false) + +MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true) + +MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true) + +MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true) +MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false) +MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false) +MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true) + +MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) + +MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) +MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +}; + + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm644x_no_event[] = { + 0, 1, 12, 13, 14, + 15, 25, 30, 31, 45, + 46, 47, 55, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm644x_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm644x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm644x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm644x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ +void __init dm644x_init(void) +{ + davinci_clk_init(dm644x_clks); + davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); +} + +static int __init dm644x_init_devices(void) +{ + if (!cpu_is_davinci_dm644x()) + return 0; + + platform_device_register(&dm644x_edma_device); + return 0; +} +postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h new file mode 100644 index 0000000..3216f21 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h @@ -0,0 +1,20 @@ +/* + * DaVinci DM6446 EVM board specific headers + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or ifndef. + */ + +#ifndef _MACH_DAVINCI_DM6446EVM_H +#define _MACH_DAVINCI_DM6446EVM_H + +#include + +int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); +int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); + +#endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 4b522e5..1917709 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -16,6 +16,12 @@ struct sys_timer; extern struct sys_timer davinci_timer; +extern void davinci_irq_init(void); +extern void davinci_map_common_io(void); + +/* parameters describe VBUS sourcing for host mode */ +extern void setup_usb(unsigned mA, unsigned potpgt_msec); + /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h new file mode 100644 index 0000000..3dcb9f4 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -0,0 +1,37 @@ +/* + * This file contains the processor specific definitions + * of the TI DM644x. + * + * Copyright (C) 2008 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_DM644X_H +#define __ASM_ARCH_DM644X_H + +#include +#include + +#define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_CNTRL_OFFSET (0x0000) +#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM644X_EMAC_MDIO_OFFSET (0x4000) +#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm644x_init(void); + +#endif /* __ASM_ARCH_DM644X_H */ -- cgit v0.10.2 From 3e9c18e1dc71b9a0fac302e2defe99d850ad3d79 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 15 Apr 2009 14:19:21 -0500 Subject: davinci: DM644x: NAND: update partitioning Update NAND partitioning for the dm6446 evm, unmasking the hidden data at the beginning and letting the kernel be updated from Linux. - This is boot-compatible with TI's software (U-Boot 1.20 and both the 2.6.10 and 2.6.18 kernels), in terms of startup and loading kernels from flash. - In the same way, it's also boot-compatible with mainline U-Boot, which stores U-Boot params in block 0 not block 16. - It's not quite compatible with systems that previously used NAND partitions to hold (filesystem) data. The compatibilities are a bit different based on which kernel was used previously + Users of TI/MV kernels no longer see mtd2 "params" (mainline u-boot env is in a different place) * Filesystem is now mtd2 ... vs mtd3 + Users of GIT kernels now see mtd0 and mtd1 partitions * Filesystem partition starts 640 KBytes earlier * Filesystem is now mtd2 ... vs mtd0 * Linux now *uses* the flash-resident BBT * Removes annoying slowdown/hiccup during boot * Potentially ~64KB less space available with TI/MV kernels If you *used* NAND partitions from Linux, there is no solution that's fully compatible with all previous kernels in those respects ... ergo this "best compromise". It'd be good to back back up the filesystem data; or, carry your own backwards-compatibility patch for awhile. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 5387e6b..c039674 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -16,11 +16,12 @@ #include #include #include +#include #include #include #include -#include + #include #include #include @@ -113,20 +114,49 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; +/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). + * It may used instead of the (default) NOR chip to boot, using TI's + * tools to install the secondary boot loader (UBL) and U-Boot. + */ struct mtd_partition davinci_evm_nandflash_partition[] = { - /* 5 MB space at the beginning for bootloader and kernel */ + /* Bootloader layout depends on whose u-boot is installed, but we + * can hide all the details. + * - block 0 for u-boot environment ... in mainline u-boot + * - block 1 for UBL (plus up to four backup copies in blocks 2..5) + * - blocks 6...? for u-boot + * - blocks 16..23 for u-boot environment ... in TI's u-boot + */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K + SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* Kernel */ { - .name = "NAND filesystem", - .offset = 5 * SZ_1M, + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + /* File system (older GIT kernels started this on the 5MB mark) */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, .mask_flags = 0, } + /* A few blocks at end hold a flash BBT ... created by TI's CCS + * using flashwriter_nand.out, but ignored by TI's versions of + * Linux and u-boot. We boot faster by using them. + */ }; static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, }; static struct resource davinci_evm_nandflash_resource[] = { @@ -151,14 +181,14 @@ static struct platform_device davinci_evm_nandflash_device = { .resource = davinci_evm_nandflash_resource, }; -static u64 davinci_fb_dma_mask = DMA_32BIT_MASK; +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); static struct platform_device davinci_fb_device = { .name = "davincifb", .id = -1, .dev = { .dma_mask = &davinci_fb_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = 0, }; -- cgit v0.10.2 From 7b1a14bbb0e547aaa4d30cc376e6c8c12539ab0f Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 27 Apr 2009 10:49:53 -0400 Subject: Btrfs: fix acl caching Linus noticed the btrfs code to cache acls wasn't properly caching a NULL acl when the inode didn't have any acls. This meant the common case of no acls resulted in expensive btree searches every time the kernel checked permissions (which is quite often). This is a modified version of Linus' original patch: Properly set initial acl fields to BTRFS_ACL_NOT_CACHED in the inode. This forces an acl lookup when permission checks are done. Fix btrfs_get_acl to avoid lookups and locking when the inode acls fields are set to null. Fix btrfs_get_acl to use the right return value from __btrfs_getxattr when deciding to cache a NULL acl. It was storing a NULL acl when __btrfs_getxattr return -ENOENT, but __btrfs_getxattr was actually returning -ENODATA for this case. Signed-off-by: Chris Mason diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c index 7fdd184..cbba000 100644 --- a/fs/btrfs/acl.c +++ b/fs/btrfs/acl.c @@ -60,15 +60,20 @@ static struct posix_acl *btrfs_get_acl(struct inode *inode, int type) return ERR_PTR(-EINVAL); } + /* Handle the cached NULL acl case without locking */ + acl = ACCESS_ONCE(*p_acl); + if (!acl) + return acl; + spin_lock(&inode->i_lock); - if (*p_acl != BTRFS_ACL_NOT_CACHED) - acl = posix_acl_dup(*p_acl); + acl = *p_acl; + if (acl != BTRFS_ACL_NOT_CACHED) + acl = posix_acl_dup(acl); spin_unlock(&inode->i_lock); - if (acl) + if (acl != BTRFS_ACL_NOT_CACHED) return acl; - size = __btrfs_getxattr(inode, name, "", 0); if (size > 0) { value = kzalloc(size, GFP_NOFS); @@ -80,9 +85,12 @@ static struct posix_acl *btrfs_get_acl(struct inode *inode, int type) btrfs_update_cached_acl(inode, p_acl, acl); } kfree(value); - } else if (size == -ENOENT) { + } else if (size == -ENOENT || size == -ENODATA || size == 0) { + /* FIXME, who returns -ENOENT? I think nobody */ acl = NULL; btrfs_update_cached_acl(inode, p_acl, acl); + } else { + acl = ERR_PTR(-EIO); } return acl; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 98bd506..dc812ec 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3047,8 +3047,8 @@ static noinline void init_btrfs_i(struct inode *inode) { struct btrfs_inode *bi = BTRFS_I(inode); - bi->i_acl = NULL; - bi->i_default_acl = NULL; + bi->i_acl = BTRFS_ACL_NOT_CACHED; + bi->i_default_acl = BTRFS_ACL_NOT_CACHED; bi->generation = 0; bi->sequence = 0; -- cgit v0.10.2 From 46a53cca826e71effe59e3cb4f383622c33ebdcb Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 27 Apr 2009 11:47:50 -0400 Subject: Btrfs: look for acls during btrfs_read_locked_inode This changes btrfs_read_locked_inode() to peek ahead in the btree for acl items. If it is certain a given inode has no acls, it will set the in memory acl fields to null to avoid acl lookups completely. Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index dc812ec..90c23eb 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2016,6 +2016,57 @@ void btrfs_orphan_cleanup(struct btrfs_root *root) } /* + * very simple check to peek ahead in the leaf looking for xattrs. If we + * don't find any xattrs, we know there can't be any acls. + * + * slot is the slot the inode is in, objectid is the objectid of the inode + */ +static noinline int acls_after_inode_item(struct extent_buffer *leaf, + int slot, u64 objectid) +{ + u32 nritems = btrfs_header_nritems(leaf); + struct btrfs_key found_key; + int scanned = 0; + + slot++; + while (slot < nritems) { + btrfs_item_key_to_cpu(leaf, &found_key, slot); + + /* we found a different objectid, there must not be acls */ + if (found_key.objectid != objectid) + return 0; + + /* we found an xattr, assume we've got an acl */ + if (found_key.type == BTRFS_XATTR_ITEM_KEY) + return 1; + + /* + * we found a key greater than an xattr key, there can't + * be any acls later on + */ + if (found_key.type > BTRFS_XATTR_ITEM_KEY) + return 0; + + slot++; + scanned++; + + /* + * it goes inode, inode backrefs, xattrs, extents, + * so if there are a ton of hard links to an inode there can + * be a lot of backrefs. Don't waste time searching too hard, + * this is just an optimization + */ + if (scanned >= 8) + break; + } + /* we hit the end of the leaf before we found an xattr or + * something larger than an xattr. We have to assume the inode + * has acls + */ + return 1; +} + +/* * read an inode from the btree into the in-memory inode */ void btrfs_read_locked_inode(struct inode *inode) @@ -2026,6 +2077,7 @@ void btrfs_read_locked_inode(struct inode *inode) struct btrfs_timespec *tspec; struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_key location; + int maybe_acls; u64 alloc_group_block; u32 rdev; int ret; @@ -2072,6 +2124,16 @@ void btrfs_read_locked_inode(struct inode *inode) alloc_group_block = btrfs_inode_block_group(leaf, inode_item); + /* + * try to precache a NULL acl entry for files that don't have + * any xattrs or acls + */ + maybe_acls = acls_after_inode_item(leaf, path->slots[0], inode->i_ino); + if (!maybe_acls) { + BTRFS_I(inode)->i_acl = NULL; + BTRFS_I(inode)->i_default_acl = NULL; + } + BTRFS_I(inode)->block_group = btrfs_find_block_group(root, 0, alloc_group_block, 0); btrfs_free_path(path); -- cgit v0.10.2 From 28853da20c840f0d147674ac850c539d3306109f Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Mon, 27 Apr 2009 17:24:28 +0100 Subject: powerpc/86xx: Add device_type entry to soc for ppc9a The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase() to return the correct address. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index d47ad07..53a7a62 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -161,6 +161,7 @@ #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; + device_type = "soc"; compatible = "fsl,mpc8641-soc", "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; reg = <0xfef00000 0x100000>; // CCSRBAR 1M -- cgit v0.10.2 From 802b352f2934f799ec2e159f61db6506094a936e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 27 Apr 2009 21:24:28 -0700 Subject: ecryptfs: fix printk format warning fs/ecryptfs/inode.c:670: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by: Randy Dunlap Signed-off-by: Tyler Hicks Cc: Dustin Kirkland Signed-off-by: Andrew Morton diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 93bc0f8..1940edd 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -667,7 +667,7 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL); if (lower_buf == NULL) { printk(KERN_ERR "%s: Out of memory whilst attempting to " - "kmalloc [%d] bytes\n", __func__, lower_bufsiz); + "kmalloc [%zd] bytes\n", __func__, lower_bufsiz); rc = -ENOMEM; goto out; } -- cgit v0.10.2 From ac20100df7a7a042423dcb8847f42d9f6ddb8d00 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 27 Apr 2009 13:31:12 -0500 Subject: eCryptfs: Fix min function comparison warning This warning shows up on 64 bit builds: fs/ecryptfs/inode.c:693: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 1940edd..2f0945d 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -690,7 +690,7 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) } /* Check for bufsiz <= 0 done in sys_readlinkat() */ rc = copy_to_user(buf, plaintext_name, - min((unsigned) bufsiz, plaintext_name_size)); + min((size_t) bufsiz, plaintext_name_size)); if (rc) rc = -EFAULT; else -- cgit v0.10.2 From 3d4f16348b77efbf81b7fa186a18a0eb815b6b84 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 27 Apr 2009 12:00:27 -0700 Subject: Revert "linux.conf.au 2009: Tuz" This reverts commit 8032b526d1a3bd91ad633dd3a3b5fdbc47ad54f1. Hey, it was only meant to be a single release. Now they can all die as far as I'm concerned. [ Just kidding. They're cute and cuddly. Except when they have horrible nasty facial diseases. Oh, and I guess they're not actually that cuddly even when disease-free. ] Signed-off-by: Linus Torvalds diff --git a/Documentation/logo.gif b/Documentation/logo.gif new file mode 100644 index 0000000..2eae75f Binary files /dev/null and b/Documentation/logo.gif differ diff --git a/Documentation/logo.svg b/Documentation/logo.svg deleted file mode 100644 index cb9e485..0000000 --- a/Documentation/logo.svg +++ /dev/null @@ -1,2911 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - image/svg+xml - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/Documentation/logo.txt b/Documentation/logo.txt index a2e6244..296f0f7 100644 --- a/Documentation/logo.txt +++ b/Documentation/logo.txt @@ -1,4 +1,13 @@ -Tux is taking a three month sabbatical to work as a barber, so Tuz is -standing in. He's taken pains to ensure you'll hardly notice. +This is the full-colour version of the currently unofficial Linux logo +("currently unofficial" just means that there has been no paperwork and +that I have not really announced it yet). It was created by Larry Ewing, +and is freely usable as long as you acknowledge Larry as the original +artist. + +Note that there are black-and-white versions of this available that +scale down to smaller sizes and are better for letterheads or whatever +you want to use it for: for the full range of logos take a look at +Larry's web-page: + + http://www.isc.tamu.edu/~lewing/linux/ -Image by Andrew McGown and Josh Bush. Image is licensed CC BY-SA. diff --git a/drivers/video/logo/logo_linux_clut224.ppm b/drivers/video/logo/logo_linux_clut224.ppm index de93ff3..3c14e43 100644 --- a/drivers/video/logo/logo_linux_clut224.ppm +++ b/drivers/video/logo/logo_linux_clut224.ppm @@ -1,2828 +1,1604 @@ P3 -145 113 +# Standard 224-color Linux logo +80 80 255 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 3 4 4 6 7 7 -8 10 10 8 10 10 6 8 8 6 7 7 3 4 4 2 2 2 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 4 5 5 17 18 17 -27 29 28 35 37 36 40 43 41 43 45 43 40 43 41 37 39 37 -32 34 33 27 30 29 23 25 24 17 21 21 15 18 18 12 15 15 -11 13 13 8 10 10 6 7 7 3 4 4 1 1 1 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 13 13 13 32 34 33 49 51 48 60 60 56 58 59 55 -55 57 54 55 56 53 49 51 48 43 45 43 39 40 39 33 37 35 -28 31 30 23 27 26 20 23 23 17 20 20 14 17 17 13 16 16 -11 14 14 10 13 13 10 12 12 9 11 11 8 10 10 6 7 7 -2 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 12 15 15 -12 15 15 8 9 9 2 3 3 0 0 0 1 1 1 25 27 26 -55 56 53 68 70 65 65 66 61 65 66 61 63 64 60 63 64 60 -58 59 55 51 52 50 47 48 46 41 42 42 35 37 36 30 32 31 -26 28 27 20 24 24 18 22 22 16 19 19 14 17 17 13 16 16 -12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10 -8 9 9 6 8 8 3 3 3 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 6 7 7 20 24 24 23 27 26 -23 27 26 18 22 22 11 13 13 23 24 24 61 63 57 72 73 67 -72 73 67 68 70 65 68 70 65 68 70 65 63 64 60 58 59 55 -55 56 53 47 48 46 41 42 42 35 37 36 30 32 31 26 28 27 -20 24 24 18 22 22 16 20 20 15 19 19 14 17 17 13 16 16 -12 15 15 12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 -8 10 10 8 9 9 7 9 9 6 7 7 1 2 2 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 1 1 1 4 5 5 5 6 5 4 5 5 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 15 19 19 40 41 39 53 55 47 -33 36 34 27 30 29 51 52 50 72 73 67 72 73 67 72 73 67 -72 73 67 68 70 65 68 70 65 63 64 60 58 59 55 51 52 50 -47 48 46 40 43 41 33 37 35 30 32 31 26 28 27 20 24 24 -18 22 22 17 21 21 16 19 19 14 18 18 14 17 17 13 17 17 -13 16 16 12 15 15 12 15 15 11 14 14 10 13 13 10 12 12 -9 11 11 8 10 10 8 9 9 7 9 9 6 8 8 3 4 4 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -2 2 2 6 8 8 10 12 12 10 12 12 10 12 12 10 12 12 -6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 20 23 23 71 71 57 131 127 93 -115 113 82 63 64 60 72 73 67 72 73 67 72 73 67 72 73 67 -68 70 65 65 66 61 61 63 57 55 57 54 49 51 48 43 45 43 -39 40 39 33 36 34 28 31 30 23 27 26 20 24 24 20 23 23 -17 21 21 16 20 20 15 19 19 15 18 18 14 18 18 14 17 17 -13 17 17 13 16 16 12 15 15 12 15 15 11 14 14 10 13 13 -10 12 12 9 11 11 8 10 10 7 9 9 7 9 9 6 8 8 -4 5 5 0 0 0 0 0 0 0 0 0 1 1 1 6 7 7 -10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 -10 12 12 3 4 4 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 18 22 22 71 71 57 144 139 99 -84 83 72 68 70 65 72 73 67 72 73 67 68 70 65 65 66 61 -63 64 60 55 57 54 51 52 50 47 48 46 40 43 41 35 37 36 -30 32 31 27 29 28 23 27 26 20 24 24 18 22 22 17 21 21 -16 20 20 15 19 19 15 19 19 15 19 19 15 18 18 14 18 18 -14 17 17 13 17 17 13 16 16 12 15 15 12 15 15 11 14 14 -10 13 13 9 12 12 9 11 11 8 10 10 7 9 9 6 8 8 -6 8 8 3 4 4 0 0 0 2 2 2 8 10 10 10 12 12 -10 12 12 10 12 12 11 13 13 36 38 35 61 61 53 48 49 45 -10 12 12 7 9 9 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 15 19 19 61 61 53 84 83 72 -68 70 65 72 73 67 68 70 65 68 70 65 63 64 60 58 59 55 -51 52 50 47 48 46 41 42 42 37 39 37 32 35 33 28 31 30 -23 27 26 20 24 24 20 23 23 18 22 22 17 21 21 17 21 21 -17 21 21 17 21 21 17 20 20 16 20 20 16 20 20 16 19 19 -15 18 18 14 18 18 13 17 17 13 16 16 12 15 15 12 15 15 -11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 7 9 9 -6 8 8 6 8 8 5 6 5 9 11 11 10 12 12 10 12 12 -19 20 18 82 81 62 149 145 103 160 154 106 142 137 94 96 95 69 -10 12 12 10 12 12 1 1 1 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 10 12 12 44 46 43 68 70 65 -72 73 67 68 70 65 68 70 65 63 64 60 55 57 54 49 51 48 -43 45 43 39 40 39 33 37 35 30 32 31 26 28 27 23 27 26 -20 24 24 18 22 22 18 22 22 18 22 22 18 22 22 20 23 23 -20 24 24 23 25 24 23 25 24 22 24 23 20 23 23 18 22 22 -17 20 20 15 19 19 15 18 18 14 17 17 13 16 16 12 15 15 -11 14 14 11 13 13 10 12 12 9 11 11 8 10 10 8 9 9 -7 9 9 7 9 9 10 12 12 10 12 12 10 12 12 71 71 57 -164 159 111 186 182 128 186 182 128 171 165 117 151 147 98 96 95 69 -10 12 12 10 12 12 3 3 3 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 8 10 10 63 64 60 68 70 65 -72 73 67 68 70 65 63 64 60 55 57 54 47 48 46 40 43 41 -33 37 35 30 32 31 27 29 28 23 27 26 20 24 24 20 23 23 -18 22 22 18 22 22 20 23 22 21 25 23 23 27 26 27 29 28 -28 31 30 31 33 31 31 33 31 31 33 31 28 31 30 26 28 27 -23 25 24 20 23 22 16 20 20 15 18 18 14 17 17 13 16 16 -12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10 -10 12 12 10 13 13 10 12 12 12 14 14 96 95 69 165 161 109 -186 182 128 192 187 134 192 187 134 176 171 126 160 154 106 103 101 77 -10 12 12 10 12 12 5 6 5 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 35 37 36 68 70 65 72 73 67 -68 70 65 65 66 61 58 59 55 49 51 48 40 43 41 33 37 35 -28 31 30 23 27 26 20 24 24 20 23 23 18 22 22 18 22 22 -18 22 22 20 23 23 23 27 26 27 30 29 32 35 33 37 39 37 -40 43 41 44 46 43 46 47 43 44 46 43 40 43 41 36 38 35 -31 33 31 27 29 28 22 24 23 17 21 21 15 18 18 14 17 17 -13 16 16 12 15 15 11 14 14 11 14 14 11 13 13 13 16 16 -13 16 16 11 14 14 10 12 12 79 78 62 142 137 94 164 159 111 -178 174 128 192 187 134 192 187 134 176 171 126 160 154 106 96 95 69 -10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 55 57 54 68 70 65 72 73 67 -68 70 65 63 64 60 55 56 53 43 45 43 35 37 36 28 31 30 -23 27 26 20 24 24 18 22 22 17 21 21 17 21 21 17 21 21 -20 24 24 25 27 26 31 33 31 38 39 37 46 47 43 53 55 47 -61 61 53 66 65 55 66 65 55 66 65 55 61 61 53 53 55 47 -46 47 43 37 39 37 30 33 30 24 26 24 17 21 21 15 18 18 -13 17 17 12 15 15 12 15 15 13 16 16 14 18 18 14 18 18 -14 17 17 12 15 15 30 31 28 118 116 76 134 131 96 160 154 106 -174 170 121 178 174 128 178 174 128 171 165 117 151 147 98 96 95 69 -10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 63 64 60 68 70 65 68 70 65 -65 66 61 58 59 55 49 51 48 39 40 39 30 32 31 23 27 26 -20 24 24 18 22 22 17 21 21 16 20 20 17 21 21 20 23 23 -25 27 26 32 35 33 43 44 41 53 55 47 66 65 55 75 75 61 -82 81 62 84 83 72 87 86 72 87 86 72 82 81 62 75 75 61 -66 65 55 53 55 47 40 41 39 31 33 31 23 25 24 17 20 20 -14 18 18 13 16 16 12 15 15 12 15 15 13 17 17 14 18 18 -14 18 18 13 16 16 46 47 43 96 95 69 125 122 87 142 137 94 -160 154 106 165 161 109 164 159 111 155 149 109 142 137 94 75 75 61 -10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 60 60 56 68 70 65 68 70 65 -63 64 60 55 57 54 46 47 45 35 37 36 27 30 29 23 25 24 -18 22 22 17 21 21 16 20 20 17 21 21 18 22 22 23 27 26 -31 33 31 43 44 41 55 56 53 71 71 57 84 83 72 92 91 72 -103 101 77 92 91 72 82 81 62 82 81 62 87 86 72 92 91 72 -84 83 72 71 71 57 55 56 53 43 44 41 30 33 30 22 24 23 -16 19 19 14 17 17 12 15 15 12 15 15 13 16 16 14 18 18 -14 18 18 14 17 17 43 44 41 82 81 62 118 116 76 125 122 87 -142 137 94 144 139 99 144 139 99 134 131 96 118 116 76 53 55 47 -10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 47 48 46 63 64 60 63 64 60 -55 57 54 49 51 48 40 43 41 32 34 33 26 28 27 20 24 24 -18 22 22 16 20 20 16 20 20 17 21 21 20 24 24 28 31 30 -40 41 39 53 55 47 75 75 61 90 89 73 87 86 72 48 49 45 -14 14 13 2 2 2 1 2 2 1 1 1 1 1 1 2 2 2 -19 20 18 43 44 41 66 65 55 53 55 47 38 39 37 26 28 27 -18 22 22 14 18 18 13 16 16 12 15 15 12 15 15 13 17 17 -14 18 18 14 18 18 30 31 28 66 65 55 96 95 69 103 101 77 -118 116 76 118 116 76 118 116 76 118 116 76 103 101 77 36 38 35 -10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 28 31 30 55 57 54 51 52 50 -49 51 48 41 42 42 35 37 36 28 31 30 23 27 26 20 23 23 -17 21 21 16 20 20 16 20 20 18 22 22 23 27 26 33 36 34 -48 49 45 71 71 57 82 81 62 43 44 41 8 9 9 6 7 7 -6 7 7 6 7 7 6 7 7 5 6 5 4 5 5 3 4 4 -2 3 3 1 2 2 4 5 4 36 38 35 48 49 45 32 35 33 -21 25 23 16 19 19 13 17 17 12 15 15 12 15 15 13 16 16 -14 18 18 14 18 18 16 18 16 36 38 35 61 61 53 82 81 62 -96 95 69 96 95 69 96 95 69 96 95 69 79 78 62 19 20 18 -10 12 12 10 12 12 4 5 5 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 13 13 13 46 47 45 43 45 43 -40 43 41 35 37 36 30 32 31 23 27 26 20 24 24 18 22 22 -17 21 21 16 20 20 17 21 21 20 23 23 27 30 29 40 41 39 -61 61 53 53 55 47 16 17 16 9 11 11 10 12 12 10 12 12 -10 12 12 10 12 12 10 12 12 9 11 11 8 10 10 8 9 9 -6 8 8 5 6 5 4 5 5 2 3 3 19 20 18 38 39 37 -26 28 27 17 21 21 14 17 17 13 16 16 12 15 15 12 15 15 -13 17 17 14 18 18 12 15 15 13 12 7 30 31 28 46 47 43 -53 55 47 66 65 55 66 65 55 53 55 47 36 38 35 10 12 12 -10 12 12 10 12 12 2 3 3 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 1 1 1 33 37 35 35 37 36 -32 35 33 28 31 30 23 27 26 20 24 24 18 22 22 17 21 21 -16 20 20 16 20 20 17 21 21 21 25 23 31 33 31 44 46 43 -31 33 31 11 13 13 12 14 14 12 15 15 13 16 16 14 17 17 -14 17 17 14 17 17 14 17 17 13 16 16 12 15 15 12 14 14 -11 13 13 9 11 11 8 10 10 6 8 8 4 5 5 17 18 17 -30 33 30 20 23 22 15 18 18 13 16 16 12 15 15 12 14 14 -13 16 16 14 17 17 14 18 18 11 12 11 7 7 5 16 17 12 -21 22 20 30 31 28 25 27 25 21 22 20 14 14 13 10 12 12 -10 12 12 9 11 11 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 18 22 22 27 30 29 -27 29 28 40 41 39 53 55 47 53 55 47 53 55 47 46 47 43 -25 27 25 16 20 20 17 21 21 23 25 24 31 33 31 20 20 20 -12 15 15 14 17 17 15 19 19 16 20 20 17 21 21 18 22 22 -18 22 22 18 22 22 18 22 22 17 21 21 17 21 21 16 19 19 -15 18 18 13 16 16 12 15 15 10 12 12 8 10 10 6 8 8 -21 22 21 22 24 23 15 19 19 13 17 17 13 16 16 12 15 15 -12 15 15 13 17 17 14 18 18 14 18 18 13 15 14 10 9 6 -7 7 5 7 7 5 7 7 5 9 11 11 10 12 12 10 12 12 -10 12 12 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 82 81 62 -118 116 76 118 116 76 161 156 96 161 156 96 161 156 96 118 116 76 -118 116 76 96 95 69 53 55 47 22 24 23 14 17 17 13 16 16 -15 19 19 17 21 21 18 22 22 20 24 24 20 24 24 23 27 26 -23 27 26 23 27 26 23 27 26 23 27 26 23 27 26 20 24 24 -20 23 23 17 21 21 16 19 19 14 17 17 12 15 15 10 12 12 -9 11 11 20 23 22 16 19 19 14 17 17 13 16 16 12 15 15 -11 14 14 13 16 16 14 17 17 14 18 18 14 17 17 12 15 15 -10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 -9 11 11 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 53 55 47 161 156 96 -161 156 96 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 161 156 96 118 116 76 96 95 69 21 22 20 16 19 19 -18 22 22 20 24 24 23 27 26 23 27 26 26 28 27 27 30 29 -27 30 29 18 22 22 12 14 14 8 10 10 9 11 11 17 21 21 -23 27 26 23 27 26 20 24 24 18 22 22 16 20 20 14 17 17 -12 14 14 14 17 17 16 20 20 14 17 17 13 17 17 13 16 16 -12 15 15 12 15 15 13 17 17 14 18 18 14 17 17 13 16 16 -11 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 -4 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 13 12 7 118 116 76 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 30 31 28 -20 24 24 23 27 26 27 30 29 28 31 30 30 32 31 23 27 26 -16 19 19 17 21 21 12 15 15 9 11 11 10 12 12 9 11 11 -20 24 24 28 31 30 26 28 27 23 27 26 20 24 24 17 21 21 -15 19 19 13 16 16 16 19 19 14 18 18 14 17 17 13 16 16 -12 15 15 11 14 14 13 16 16 14 17 17 14 18 18 14 17 17 -12 15 15 10 12 12 10 12 12 10 12 12 10 12 12 8 9 9 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 82 81 62 161 156 96 230 229 82 -230 229 82 233 233 100 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 -27 29 28 27 30 29 30 32 31 30 32 31 23 27 26 20 24 24 -26 28 27 17 21 21 6 7 7 72 73 67 145 141 105 15 15 15 -14 17 17 33 37 35 30 32 31 28 31 30 26 28 27 23 27 26 -20 23 23 16 20 20 15 19 19 14 18 18 14 17 17 13 16 16 -12 15 15 11 14 14 12 15 15 13 17 17 14 18 18 14 17 17 -13 16 16 11 13 13 10 12 12 10 12 12 9 11 11 1 1 1 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 16 17 12 161 156 96 230 229 82 230 229 82 -243 242 120 235 234 117 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 -82 81 62 28 31 30 28 31 30 27 30 29 28 31 30 30 32 31 -33 37 35 13 16 16 3 3 3 105 104 92 210 208 158 12 14 14 -17 21 21 33 37 35 33 37 35 32 35 33 30 32 31 27 30 29 -23 27 26 20 23 23 17 20 20 15 18 18 14 18 18 13 17 17 -13 16 16 12 15 15 11 14 14 13 16 16 14 17 17 14 18 18 -13 17 17 12 15 15 10 12 12 10 12 12 3 4 4 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 96 95 69 230 229 82 230 229 82 244 244 132 -241 241 143 243 242 120 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -161 156 96 46 47 43 32 35 33 33 37 35 33 37 35 33 37 35 -40 43 41 23 27 26 1 1 1 2 2 2 24 26 24 14 17 17 -23 27 26 33 37 35 33 37 35 33 37 35 33 37 35 30 32 31 -27 30 29 23 27 26 20 23 23 15 18 18 14 18 18 14 17 17 -13 16 16 12 15 15 11 14 14 12 15 15 13 17 17 14 17 17 -14 17 17 13 16 16 11 13 13 6 8 8 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 16 17 12 161 156 96 230 229 82 235 234 117 239 239 170 -239 239 170 236 236 101 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 118 116 76 33 37 35 33 37 35 37 39 37 37 39 37 -43 45 43 49 51 48 20 24 24 8 10 10 17 20 20 35 37 36 -33 37 35 40 43 41 37 39 37 35 37 36 33 37 35 33 37 35 -30 32 31 27 30 29 23 27 26 15 19 19 14 18 18 14 17 17 -13 17 17 13 16 16 12 15 15 11 14 14 13 16 16 14 17 17 -14 17 17 13 17 17 11 14 14 4 5 5 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 96 95 69 230 229 82 230 229 82 239 239 170 251 251 187 -241 241 143 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 161 156 96 36 38 35 33 37 35 33 37 35 33 37 35 -37 39 37 47 48 46 55 57 54 55 57 54 49 51 48 43 45 43 -43 45 43 43 45 43 40 43 41 40 43 41 37 39 37 33 37 35 -33 37 35 28 31 30 26 28 27 16 20 20 15 18 18 14 18 18 -14 17 17 13 16 16 12 15 15 11 14 14 12 15 15 13 17 17 -14 17 17 14 17 17 8 10 10 5 7 7 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -16 17 12 230 229 82 230 229 82 243 242 120 251 251 187 251 251 187 -246 246 123 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 66 65 55 30 32 31 32 35 33 33 37 35 -33 37 35 37 39 37 40 43 41 47 48 46 49 51 48 51 52 50 -55 57 54 55 57 54 51 52 50 47 48 46 43 45 43 39 40 39 -33 37 35 30 32 31 26 28 27 17 21 21 15 19 19 14 18 18 -14 17 17 13 16 16 12 15 15 12 14 14 11 14 14 13 16 16 -14 17 17 12 15 15 7 9 9 6 8 8 1 1 1 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -96 95 69 230 229 82 230 229 82 239 239 170 251 251 187 239 239 170 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 96 95 69 27 30 29 28 31 30 30 32 31 -33 37 35 40 43 41 46 47 45 55 57 54 63 64 60 72 73 67 -72 73 67 72 73 67 72 73 67 65 66 61 55 57 54 47 48 46 -39 40 39 32 35 33 27 30 29 17 21 21 15 19 19 15 18 18 -14 18 18 13 17 17 13 16 16 12 15 15 11 14 14 12 14 14 -13 16 16 9 11 11 7 9 9 9 11 11 66 65 55 115 113 82 -21 22 20 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 12 7 -230 229 82 230 229 82 236 236 101 251 251 187 251 251 187 246 246 123 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 118 116 76 23 27 26 26 28 27 32 35 33 -51 52 50 90 89 73 110 109 94 145 141 105 168 163 120 177 172 135 -177 172 135 188 184 146 188 184 146 181 176 137 194 191 148 188 184 146 -184 179 149 188 184 146 188 184 146 156 151 111 177 172 135 181 176 137 -177 172 135 168 163 120 168 163 120 158 153 112 156 151 111 158 153 112 -156 151 111 158 153 112 177 172 135 188 184 146 188 184 146 194 189 146 -36 38 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 82 81 62 -230 229 82 230 229 82 244 244 132 251 251 187 244 244 132 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 82 81 62 -96 95 69 230 229 82 181 178 103 110 109 94 156 151 111 188 184 146 -188 184 146 197 193 154 188 184 146 184 181 136 188 184 146 168 163 120 -168 163 120 178 174 128 156 151 111 158 153 112 174 170 121 156 151 111 -156 151 111 158 153 112 156 151 111 168 163 120 178 174 128 181 176 137 -176 171 126 178 174 128 184 181 136 176 171 126 178 174 128 184 181 136 -176 171 126 178 174 128 184 181 136 164 159 111 155 149 109 96 95 69 -1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 2 2 1 161 156 96 -230 229 82 230 229 82 244 244 132 244 244 132 236 236 101 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 46 47 43 82 81 62 -158 153 112 197 193 154 194 189 146 184 181 136 188 184 146 168 163 120 -156 151 111 137 133 100 131 127 93 137 133 100 137 133 100 158 153 112 -121 119 87 137 133 100 156 151 111 145 141 105 99 98 80 84 83 72 -63 64 60 52 53 49 40 43 41 33 36 34 36 38 35 36 38 35 -38 39 37 43 44 41 43 44 41 46 47 43 48 49 45 48 49 45 -46 47 43 36 38 35 30 31 28 19 20 18 6 7 7 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 36 38 35 230 229 82 -230 229 82 230 229 82 246 246 123 236 236 101 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 53 55 47 121 119 87 -176 171 126 171 165 117 161 156 96 82 81 62 53 55 47 33 37 35 -39 40 39 63 64 60 99 98 80 121 119 87 137 133 100 177 172 135 -176 171 126 184 181 136 131 127 93 131 127 93 110 109 94 84 83 72 -51 52 50 39 40 39 27 29 28 18 22 22 16 19 19 15 19 19 -15 19 19 14 18 18 14 17 17 13 16 16 12 15 15 11 14 14 -10 13 13 9 12 12 9 11 11 8 9 9 7 9 9 1 1 1 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 -230 229 82 230 229 82 236 236 101 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 96 95 69 71 71 57 -36 38 35 118 116 76 118 116 76 12 15 15 15 18 18 20 24 24 -33 37 35 55 56 53 84 83 72 110 109 94 145 141 105 110 109 94 -168 163 120 121 119 87 156 151 111 131 127 93 87 86 72 61 63 57 -47 48 46 28 31 30 18 22 22 15 19 19 15 18 18 15 19 19 -15 19 19 14 18 18 14 17 17 13 17 17 13 16 16 12 15 15 -11 13 13 10 12 12 9 11 11 8 10 10 7 9 9 3 3 3 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 1 1 0 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 -161 156 96 230 229 82 118 116 76 11 14 14 14 17 17 18 22 22 -27 30 29 40 43 41 60 60 56 84 83 72 105 104 92 110 109 94 -110 109 94 110 109 94 99 98 80 90 89 73 68 70 65 47 48 46 -32 34 33 23 25 24 20 23 23 17 21 21 15 19 19 14 17 17 -15 19 19 15 18 18 14 18 18 13 17 17 13 16 16 12 15 15 -11 14 14 10 12 12 9 11 11 8 10 10 7 9 9 4 5 5 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 161 156 96 118 116 76 11 13 13 13 16 16 15 19 19 -20 24 24 30 32 31 40 43 41 51 52 50 63 64 60 72 73 67 -65 66 61 65 66 61 65 66 61 55 57 54 46 47 45 33 37 35 -27 29 28 20 24 24 17 21 21 16 20 20 16 20 20 15 19 19 -15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15 -11 14 14 10 13 13 9 12 12 8 10 10 7 9 9 6 7 7 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 53 55 47 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -161 156 96 118 116 76 53 55 47 10 13 13 12 15 15 14 17 17 -17 20 20 20 24 24 27 29 28 32 34 33 37 39 37 40 43 41 -43 45 43 41 42 42 35 37 36 30 32 31 28 31 30 23 27 26 -20 23 23 17 21 21 16 20 20 16 20 20 16 20 20 16 19 19 -15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15 -11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 10 12 12 -1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 82 81 62 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96 -118 116 76 82 81 62 13 14 12 10 13 13 12 15 15 13 17 17 -15 19 19 16 20 20 20 23 23 20 24 24 23 27 26 26 28 27 -26 28 27 26 28 27 23 27 26 18 22 22 20 23 23 17 21 21 -17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 19 19 -15 19 19 15 19 19 15 18 18 14 17 17 13 17 17 13 16 16 -12 15 15 12 14 14 12 14 14 12 14 14 12 14 14 23 24 24 -6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 161 156 96 161 156 96 118 116 76 -71 71 57 13 14 12 9 12 12 10 13 13 12 15 15 13 17 17 -15 18 18 15 19 19 16 20 20 17 21 21 17 21 21 18 22 22 -18 22 22 18 22 22 17 21 21 16 19 19 15 18 18 14 18 18 -16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -15 19 19 15 19 19 15 18 18 14 18 18 16 20 20 23 25 24 -17 21 21 25 27 26 47 48 46 47 48 46 51 52 50 72 73 67 -33 36 34 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 161 156 96 118 116 76 118 116 76 46 47 43 -9 11 11 9 11 11 10 12 12 11 13 13 12 15 15 14 17 17 -15 18 18 15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -15 19 19 16 20 20 20 24 24 55 56 53 32 34 33 84 83 72 -90 89 73 110 109 94 110 109 94 105 104 92 110 109 94 110 109 94 -72 73 67 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 96 95 69 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 161 156 96 118 116 76 82 81 62 16 17 12 9 11 11 -9 11 11 9 12 12 10 13 13 12 14 14 13 16 16 14 18 18 -15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 19 19 33 36 34 99 98 80 156 151 111 145 141 105 184 179 149 -168 163 120 184 179 149 177 172 135 156 151 111 145 141 105 110 109 94 -90 89 73 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 71 71 57 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 -230 229 82 161 156 96 230 229 82 230 229 82 230 229 82 161 156 96 -118 116 76 82 81 62 30 31 28 9 11 11 9 11 11 9 11 11 -10 12 12 10 13 13 11 14 14 13 16 16 14 17 17 15 18 18 -15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -18 22 22 58 59 55 137 133 100 197 193 154 214 212 158 210 208 158 -197 193 154 184 179 149 184 179 149 137 133 100 110 109 94 99 98 80 -84 83 72 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 -161 156 96 161 156 96 161 156 96 161 156 96 118 116 76 71 71 57 -21 22 20 12 14 14 11 13 13 10 12 12 10 12 12 10 13 13 -11 13 13 12 15 15 13 16 16 14 17 17 14 18 18 15 19 19 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 17 21 21 -23 27 26 84 83 72 184 179 149 251 251 187 210 208 158 184 179 149 -184 179 149 156 151 111 110 109 94 84 83 72 63 64 60 51 52 50 -18 22 22 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 -230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96 -161 156 96 161 156 96 118 116 76 53 55 47 20 23 22 16 19 19 -13 16 16 12 15 15 12 14 14 11 14 14 11 14 14 11 14 14 -12 15 15 13 16 16 14 17 17 15 19 19 16 20 20 17 21 21 -23 27 26 18 22 22 20 24 24 23 27 26 30 32 31 17 21 21 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -23 27 26 33 37 35 137 133 100 156 151 111 158 153 112 105 104 92 -105 104 92 68 70 65 39 40 39 18 22 22 12 14 14 12 15 15 -9 11 11 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 -230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 118 116 76 -118 116 76 66 65 55 43 45 43 32 34 33 25 27 26 20 23 22 -17 20 20 15 18 18 14 17 17 15 18 18 13 16 16 14 17 17 -14 18 18 16 20 20 32 34 33 55 57 54 58 59 55 72 73 67 -105 104 92 55 57 54 65 66 61 63 64 60 40 43 41 33 37 35 -41 42 42 20 24 24 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -17 21 21 26 28 27 30 32 31 35 37 36 68 70 65 39 40 39 -23 27 26 15 18 18 13 16 16 11 14 14 9 12 12 8 10 10 -7 9 9 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35 -230 229 82 230 229 82 230 229 82 96 95 69 30 31 28 49 51 48 -90 89 73 68 70 65 55 57 54 47 48 46 47 48 46 43 45 43 -32 34 33 43 45 43 43 45 43 23 27 26 25 27 26 40 43 41 -40 43 41 90 89 73 110 109 94 145 141 105 156 151 111 156 151 111 -184 179 149 184 179 149 177 172 135 184 179 149 137 133 100 84 83 72 -105 104 92 63 64 60 49 51 48 47 48 46 28 31 30 18 22 22 -16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 15 19 19 15 19 19 15 19 19 18 22 22 15 19 19 -13 16 16 12 15 15 11 14 14 10 13 13 9 12 12 9 11 11 -8 10 10 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -30 31 28 230 229 82 71 71 57 2 2 1 0 0 0 58 59 55 -105 104 92 84 83 72 65 66 61 84 83 72 110 109 94 110 109 94 -145 141 105 105 104 92 110 109 94 110 109 94 84 83 72 110 109 94 -158 153 112 197 193 154 197 193 154 239 239 170 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 197 193 154 -197 193 154 184 179 149 145 141 105 137 133 100 105 104 92 47 48 46 -20 23 23 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 19 19 15 19 19 15 19 19 14 18 18 14 17 17 -13 17 17 13 16 16 12 14 14 12 14 14 13 13 13 13 13 13 -13 13 13 12 12 12 10 10 9 6 7 7 2 2 2 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 65 66 61 -105 104 92 84 83 72 84 83 72 110 109 94 184 179 149 210 208 158 -210 208 158 210 208 158 214 212 158 197 193 154 214 212 158 210 208 158 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 251 251 187 239 239 170 251 251 187 184 179 149 84 83 72 -26 28 27 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18 -13 17 17 13 16 16 15 15 15 14 14 13 14 14 13 14 14 13 -13 13 13 13 13 13 12 12 12 12 12 12 12 12 12 3 4 4 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 72 73 67 -105 104 92 99 98 80 84 83 72 99 98 80 177 172 135 197 193 154 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 214 212 158 197 193 154 99 98 80 -23 27 26 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18 -14 17 17 16 16 16 16 16 16 16 16 16 15 15 15 14 14 13 -14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12 -3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 84 83 72 -110 109 94 99 98 80 72 73 67 63 64 60 99 98 80 177 172 135 -184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 210 208 158 184 179 149 177 172 135 110 109 94 33 37 35 -17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -16 20 20 16 20 20 15 19 19 15 19 19 15 19 19 14 18 18 -15 18 18 18 19 18 18 19 18 17 17 17 16 16 16 15 15 15 -14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12 -10 10 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 105 104 92 -108 107 93 99 98 80 72 73 67 63 64 60 51 52 50 87 86 72 -105 104 92 110 109 94 108 107 93 156 151 111 184 179 149 184 179 149 -197 193 154 197 193 154 197 193 154 184 179 149 184 179 149 177 172 135 -197 193 154 156 151 111 177 172 135 184 179 149 168 163 120 137 133 100 -145 141 105 110 109 94 99 98 80 47 48 46 55 57 54 15 19 19 -16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 -17 20 20 17 21 21 16 20 20 16 19 19 15 19 19 16 19 19 -20 20 20 21 22 21 20 20 20 19 20 19 18 19 18 16 16 16 -15 15 15 14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 -12 12 12 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 58 59 55 110 109 94 -105 104 92 90 89 73 72 73 67 55 57 54 43 45 43 39 40 39 -43 45 43 46 47 45 43 45 43 68 70 65 65 66 61 63 64 60 -108 107 93 72 73 67 105 104 92 90 89 73 72 73 67 40 43 41 -72 73 67 68 70 65 68 70 65 58 59 55 63 64 60 49 51 48 -43 45 43 33 36 34 27 30 29 20 24 24 16 20 20 15 19 19 -15 19 19 15 19 19 15 19 19 16 19 19 16 20 20 16 20 20 -17 21 21 20 24 24 20 23 22 17 21 21 17 20 20 20 20 20 -21 22 21 21 22 21 21 22 21 21 22 21 20 20 20 18 19 18 -16 16 16 15 15 15 13 13 13 13 13 13 12 12 12 12 12 12 -12 12 12 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 21 22 21 110 109 94 110 109 94 -105 104 92 84 83 72 68 70 65 51 52 50 41 42 42 33 37 35 -28 31 30 23 27 26 20 23 23 18 22 22 17 20 20 25 27 26 -26 28 27 27 30 29 25 27 26 20 23 23 23 27 26 30 32 31 -20 24 24 17 21 21 18 22 22 15 19 19 26 28 27 20 23 23 -14 18 18 15 19 19 15 18 18 15 19 19 15 19 19 15 19 19 -15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 16 19 19 -16 20 20 22 24 23 24 26 24 22 24 23 20 23 22 22 24 23 -24 26 24 24 26 24 23 24 24 22 24 23 21 22 21 19 20 19 -17 17 17 15 15 15 14 14 13 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 2 2 2 99 98 80 110 109 94 108 107 93 -105 104 92 84 83 72 63 64 60 49 51 48 39 40 39 32 34 33 -27 30 29 23 25 24 20 23 23 17 20 20 15 19 19 14 18 18 -14 17 17 13 17 17 13 17 17 13 17 17 13 17 17 13 17 17 -14 17 17 14 17 17 14 17 17 14 17 17 14 17 17 14 17 17 -14 18 18 14 18 18 14 18 18 14 18 18 15 18 18 15 19 19 -15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 -15 19 19 17 21 21 27 29 28 26 28 27 25 27 26 25 27 26 -27 29 28 27 29 28 26 28 27 24 26 24 21 22 21 20 20 20 -18 19 18 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 51 52 50 110 109 94 110 109 94 105 104 92 -90 89 73 72 73 67 55 57 54 43 45 43 35 37 36 30 32 31 -26 28 27 20 24 24 17 21 21 16 19 19 15 18 18 14 17 17 -13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 -13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17 -14 17 17 14 17 17 14 17 17 14 18 18 14 18 18 14 18 18 -15 18 18 15 18 18 15 19 19 15 19 19 15 19 19 15 19 19 -15 19 19 15 19 19 27 29 28 32 34 33 28 31 30 27 29 28 -30 32 31 30 32 31 30 31 28 26 28 27 23 24 24 21 22 21 -19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 3 3 3 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 10 10 9 108 107 93 110 109 94 108 107 93 99 98 80 -84 83 72 63 64 60 49 51 48 40 43 41 33 36 34 27 30 29 -23 27 26 18 22 22 17 20 20 15 18 18 14 17 17 13 16 16 -13 16 16 13 16 16 12 15 15 12 15 15 12 15 15 12 15 15 -13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 -13 17 17 13 17 17 14 17 17 14 17 17 14 17 17 14 18 18 -14 18 18 14 18 18 15 18 18 15 18 18 15 19 19 15 19 19 -15 19 19 15 19 19 17 21 21 33 36 34 32 34 33 31 33 31 -33 36 34 33 36 34 31 33 31 27 29 28 25 27 26 21 22 21 -19 20 19 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 63 64 60 137 133 100 43 45 43 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 68 70 65 110 109 94 110 109 94 105 104 92 84 83 72 -68 70 65 55 57 54 43 45 43 35 37 36 30 32 31 26 28 27 -20 24 24 17 21 21 16 19 19 14 17 17 13 16 16 12 15 15 -12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 -12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16 -13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17 -14 17 17 14 17 17 14 18 18 14 18 18 14 18 18 15 18 18 -15 19 19 15 19 19 15 19 19 20 24 24 32 34 33 35 37 36 -37 39 37 35 37 36 33 36 34 30 32 31 26 28 27 22 24 23 -20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -1 1 1 99 98 80 184 179 149 184 179 149 68 70 65 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -15 15 15 110 109 94 110 109 94 108 107 93 99 98 80 72 73 67 -61 63 57 49 51 48 39 40 39 33 36 34 27 30 29 23 25 24 -18 22 22 16 19 19 14 17 17 13 16 16 12 15 15 12 15 15 -11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 -11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15 -12 15 15 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 -13 17 17 14 17 17 14 17 17 14 17 17 14 18 18 14 18 18 -14 18 18 15 18 18 15 19 19 15 19 19 30 32 31 38 39 37 -39 40 39 39 40 39 35 37 36 31 33 31 27 29 28 22 24 23 -20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 -110 109 94 197 193 154 210 208 158 184 179 149 68 70 65 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -68 70 65 110 109 94 110 109 94 105 104 92 84 83 72 65 66 61 -51 52 50 43 45 43 35 37 36 30 32 31 25 27 26 20 23 23 -17 20 20 15 18 18 13 16 16 12 15 15 12 15 15 11 14 14 -11 14 14 11 14 14 11 13 13 11 13 13 11 13 13 11 13 13 -11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 -12 15 15 12 15 15 12 15 15 12 15 15 13 16 16 13 16 16 -13 16 16 13 16 16 13 17 17 13 17 17 14 17 17 14 17 17 -14 18 18 14 18 18 14 18 18 16 19 19 37 39 37 41 42 42 -41 42 42 41 42 42 38 39 37 32 34 33 27 29 28 23 24 24 -21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 11 11 11 137 133 100 -197 193 154 251 251 187 239 239 170 184 179 149 31 33 31 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 12 12 12 -110 109 94 110 109 94 105 104 92 90 89 73 72 73 67 58 59 55 -46 47 45 37 39 37 31 33 31 26 28 27 20 24 24 17 21 21 -15 18 18 13 16 16 12 15 15 12 14 14 11 13 13 11 13 13 -10 13 13 10 13 13 10 13 13 10 13 13 10 13 13 10 13 13 -10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14 -11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15 -13 16 16 13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 -14 17 17 14 17 17 14 18 18 23 27 26 41 42 42 41 42 42 -43 45 43 41 42 42 39 40 39 33 36 34 27 29 28 23 24 24 -21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 27 29 28 168 163 120 210 208 158 -251 251 187 251 251 187 210 208 158 137 133 100 1 1 1 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 60 60 56 -110 109 94 105 104 92 105 104 92 84 83 72 65 66 61 51 52 50 -40 43 41 33 36 34 27 30 29 23 25 24 18 22 22 16 19 19 -14 17 17 12 15 15 11 14 14 11 14 14 10 13 13 10 13 13 -10 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 -10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13 -11 13 13 11 14 14 11 14 14 11 14 14 11 14 14 12 15 15 -12 15 15 12 15 15 12 15 15 13 16 16 13 16 16 13 16 16 -13 17 17 13 17 17 14 17 17 32 34 33 43 45 43 43 45 43 -43 45 43 43 45 43 39 40 39 33 36 34 27 29 28 23 24 24 -21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 1 1 1 68 70 65 184 179 149 210 208 158 251 251 187 -251 251 187 214 212 158 184 179 149 37 39 37 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 105 104 92 -105 104 92 105 104 92 99 98 80 72 73 67 58 59 55 46 47 45 -35 37 36 30 32 31 25 27 26 20 23 23 16 19 19 14 17 17 -12 15 15 12 14 14 11 13 13 10 13 13 10 12 12 10 12 12 -10 12 12 10 12 12 9 12 12 9 12 12 9 12 12 9 12 12 -10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 13 13 -10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14 -11 14 14 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16 -13 16 16 13 16 16 17 20 20 41 42 42 46 47 45 46 47 45 -46 47 45 43 45 43 40 41 39 33 36 34 27 29 28 23 24 24 -20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -15 15 15 110 109 94 197 193 154 214 212 158 251 251 187 251 251 187 -239 239 170 184 179 149 84 83 72 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 47 48 46 105 104 92 -105 104 92 99 98 80 84 83 72 68 70 65 51 52 50 40 43 41 -32 34 33 27 29 28 22 24 23 17 21 21 15 18 18 13 16 16 -12 15 15 11 13 13 10 13 13 10 12 12 9 12 12 9 12 12 -9 12 12 9 12 12 9 11 11 9 11 11 9 11 11 9 11 11 -9 12 12 9 12 12 9 12 12 9 12 12 10 12 12 10 12 12 -10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13 -11 14 14 11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 -12 15 15 13 16 16 28 31 30 43 45 43 47 48 46 47 48 46 -47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23 -20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 3 4 4 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 60 60 56 -177 172 135 197 193 154 251 251 187 251 251 187 251 251 187 251 251 187 -184 179 149 110 109 94 3 4 4 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 1 1 1 99 98 80 105 104 92 -99 98 80 87 86 72 84 83 72 63 64 60 46 47 45 35 37 36 -30 32 31 25 27 26 18 22 22 16 19 19 14 17 17 12 15 15 -11 14 14 10 13 13 9 12 12 9 12 12 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 11 11 9 12 12 9 12 12 -9 12 12 10 12 12 10 12 12 10 12 12 10 13 13 10 13 13 -10 13 13 11 13 13 11 14 14 11 14 14 11 14 14 12 15 15 -12 15 15 14 17 17 41 42 42 47 48 46 49 51 48 51 52 50 -47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23 -19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 23 24 24 137 133 100 184 179 149 -210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 184 179 149 -110 109 94 13 13 13 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 30 32 31 105 104 92 99 98 80 -84 83 72 84 83 72 72 73 67 55 57 54 41 42 42 32 34 33 -27 29 28 20 24 24 17 20 20 14 17 17 13 16 16 12 14 14 -10 13 13 10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 12 12 9 12 12 10 12 12 10 12 12 10 12 12 -10 13 13 10 13 13 10 13 13 11 13 13 11 14 14 11 14 14 -11 14 14 27 29 28 55 56 53 72 73 67 51 52 50 51 52 50 -49 51 48 43 45 43 39 40 39 32 34 33 26 28 27 21 22 21 -19 20 19 16 16 16 18 19 17 13 13 13 12 12 12 12 12 12 -12 12 12 12 12 12 1 1 1 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 8 8 7 84 83 72 184 179 149 197 193 154 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 184 179 149 145 141 105 -19 20 19 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 14 14 13 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 72 73 67 105 104 92 84 83 72 -72 73 67 84 83 72 68 70 65 49 51 48 39 40 39 30 32 31 -25 27 26 18 22 22 15 18 18 13 16 16 12 15 15 11 13 13 -10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 12 12 9 12 12 9 12 12 -10 12 12 10 12 12 10 12 12 10 13 13 10 13 13 11 13 13 -13 16 16 41 42 42 99 98 80 158 153 112 65 66 61 51 52 50 -49 51 48 43 45 43 39 40 39 31 33 31 25 27 26 21 22 21 -21 22 21 68 70 65 55 56 53 13 13 13 12 12 12 12 12 12 -12 12 12 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 -63 64 60 158 153 112 184 179 149 210 208 158 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 184 179 149 137 133 100 27 29 28 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -21 22 21 110 109 94 5 6 5 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 13 13 13 105 104 92 90 89 73 72 73 67 -68 70 65 84 83 72 63 64 60 46 47 45 35 37 36 27 29 28 -22 24 23 17 20 20 14 17 17 12 15 15 11 14 14 10 12 12 -10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 12 12 9 12 12 10 12 12 10 12 12 10 13 13 10 13 13 -30 32 31 47 48 46 177 172 135 210 208 158 137 133 100 55 56 53 -49 51 48 43 45 43 38 39 37 31 33 31 25 27 26 22 24 23 -110 109 94 184 179 149 63 64 60 13 13 13 12 12 12 12 12 12 -12 12 12 8 9 9 0 0 0 1 1 1 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 21 22 21 105 104 92 -184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 251 251 187 184 179 149 145 141 105 23 24 24 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -68 70 65 184 179 149 105 104 92 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 51 52 50 99 98 80 84 83 72 63 64 60 -68 70 65 72 73 67 55 57 54 41 42 42 32 34 33 25 27 26 -20 23 23 16 19 19 13 16 16 12 14 14 10 13 13 10 12 12 -9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 11 11 9 12 12 9 12 12 10 12 12 17 20 20 -46 47 45 72 73 67 210 208 158 251 251 187 210 208 158 63 64 60 -49 51 48 43 45 43 37 39 37 30 32 31 24 26 24 105 104 92 -210 208 158 197 193 154 47 48 46 13 13 13 12 12 12 12 12 12 -12 12 12 6 7 7 33 36 34 48 49 45 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 8 8 7 23 24 24 55 56 53 110 109 94 -210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 184 179 149 110 109 94 20 20 20 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -110 109 94 251 251 187 210 208 158 47 48 46 0 0 0 0 0 0 -0 0 0 1 1 1 90 89 73 90 89 73 72 73 67 55 56 53 -72 73 67 68 70 65 51 52 50 37 39 37 28 31 30 23 25 24 -17 21 21 15 18 18 12 15 15 11 14 14 10 13 13 9 12 12 -9 11 11 9 11 11 9 11 11 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 9 12 12 13 16 16 41 42 42 -49 51 48 110 109 94 251 251 187 251 251 187 251 251 187 105 104 92 -49 51 48 43 45 43 35 37 36 30 31 28 47 48 46 197 193 154 -251 251 187 197 193 154 31 33 31 12 12 12 12 12 12 12 12 12 -12 12 12 51 52 50 184 179 149 72 73 67 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 -11 11 11 21 22 21 30 32 31 40 41 39 60 60 56 145 141 105 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158 -184 179 149 110 109 94 13 13 13 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 4 5 4 61 61 53 48 49 45 3 4 3 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -156 151 111 251 251 187 251 251 187 184 179 149 11 11 11 0 0 0 -0 0 0 26 28 27 99 98 80 84 83 72 60 60 56 43 45 43 -72 73 67 65 66 61 49 51 48 35 37 36 27 29 28 20 24 24 -17 20 20 14 17 17 12 15 15 11 13 13 10 12 12 9 11 11 -9 11 11 9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11 -9 11 11 9 11 11 9 11 11 11 13 13 37 39 37 47 48 46 -51 52 50 184 179 149 251 251 187 251 251 187 251 251 187 145 141 105 -47 48 46 41 42 42 35 37 36 27 29 28 137 133 100 251 251 187 -251 251 187 197 193 154 19 20 19 12 12 12 12 12 12 12 12 12 -27 29 28 184 179 149 214 212 158 63 64 60 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 1 1 1 6 7 7 16 16 16 24 26 24 -30 32 31 38 39 37 47 48 46 55 57 54 68 70 65 110 109 94 -197 193 154 251 251 187 251 251 187 251 251 187 210 208 158 184 179 149 -105 104 92 8 8 7 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 65 66 61 184 179 149 156 151 111 -30 32 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -168 163 120 251 251 187 251 251 187 251 251 187 110 109 94 0 0 0 -0 0 0 60 60 56 84 83 72 68 70 65 51 52 50 38 39 37 -84 83 72 63 64 60 43 45 43 33 36 34 25 27 26 20 23 22 -15 18 18 13 16 16 12 14 14 10 13 13 9 12 12 9 11 11 -9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -9 11 11 9 11 11 10 12 12 33 36 34 46 47 45 51 52 50 -72 73 67 210 208 158 251 251 187 251 251 187 251 251 187 177 172 135 -47 48 46 41 42 42 35 37 36 37 39 37 184 179 149 251 251 187 -251 251 187 197 193 154 13 13 13 12 12 12 12 12 12 12 12 12 -110 109 94 251 251 187 251 251 187 37 39 37 0 0 0 0 0 0 -0 0 0 21 22 20 2 2 1 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -4 5 5 12 12 12 21 22 21 25 27 26 30 32 31 38 39 37 -46 47 45 55 56 53 60 60 56 65 66 61 68 70 65 105 104 92 -110 109 94 197 193 154 210 208 158 197 193 154 184 179 149 84 83 72 -2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 13 13 13 184 179 149 251 251 187 -197 193 154 43 44 41 0 0 0 0 0 0 0 0 0 0 0 0 -145 141 105 251 251 187 251 251 187 251 251 187 214 212 158 43 45 43 -2 2 2 84 83 72 72 73 67 58 59 55 41 42 42 38 39 37 -72 73 67 58 59 55 41 42 42 31 33 31 25 27 26 18 22 22 -14 17 17 12 15 15 12 14 14 10 12 12 9 12 12 9 11 11 -9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 9 12 12 31 33 31 43 45 43 49 51 48 55 56 53 -110 109 94 251 251 187 251 251 187 251 251 187 251 251 187 168 163 120 -47 48 46 41 42 42 33 36 34 63 64 60 197 193 154 251 251 187 -251 251 187 184 179 149 13 13 13 12 12 12 12 12 12 16 16 16 -197 193 154 251 251 187 239 239 170 20 20 20 0 0 0 2 2 1 -108 107 93 110 109 94 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 1 1 1 4 5 5 11 11 11 18 19 18 -22 24 23 26 28 27 32 34 33 39 40 39 46 47 45 51 52 50 -55 57 54 60 60 56 63 64 60 63 64 60 63 64 60 58 59 55 -63 64 60 99 98 80 145 141 105 137 133 100 43 45 43 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 3 4 3 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 110 109 94 251 251 187 -251 251 187 184 179 149 25 27 26 0 0 0 0 0 0 0 0 0 -99 98 80 251 251 187 251 251 187 251 251 187 251 251 187 156 151 111 -25 27 26 84 83 72 65 66 61 47 48 46 32 34 33 39 40 39 -72 73 67 55 57 54 40 41 39 30 32 31 23 25 24 18 22 22 -14 17 17 12 15 15 11 13 13 10 12 12 9 11 11 9 11 11 -9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -9 11 11 28 31 30 41 42 42 47 48 46 55 56 53 58 59 55 -137 133 100 251 251 187 251 251 187 251 251 187 210 208 158 137 133 100 -47 48 46 40 41 39 32 34 33 75 75 61 184 179 149 239 239 170 -251 251 187 177 172 135 13 13 13 12 12 12 12 12 12 43 44 41 -197 193 154 251 251 187 210 208 158 10 10 9 0 0 0 84 83 72 -251 251 187 84 83 72 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 -6 7 7 11 11 11 17 17 17 20 20 20 23 24 24 27 29 28 -32 34 33 38 39 37 43 45 43 47 48 46 51 52 50 55 56 53 -58 59 55 58 59 55 55 57 54 55 56 53 47 48 46 41 42 42 -35 37 36 31 33 31 47 48 46 14 14 13 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 66 65 55 99 98 80 20 20 20 -0 0 0 0 0 0 0 0 0 0 0 0 43 45 43 214 212 158 -251 251 187 251 251 187 145 141 105 3 3 3 0 0 0 0 0 0 -48 49 45 184 179 149 239 239 170 251 251 187 239 239 170 177 172 135 -84 83 72 72 73 67 55 56 53 39 40 39 26 28 27 39 40 39 -68 70 65 51 52 50 39 40 39 28 31 30 22 24 23 17 20 20 -14 17 17 12 14 14 10 13 13 9 11 11 9 11 11 9 11 11 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -27 29 28 40 41 39 46 47 45 51 52 50 55 57 54 63 64 60 -131 127 93 197 193 154 210 208 158 197 193 154 168 163 120 96 95 69 -47 48 46 40 41 39 32 34 33 71 71 57 145 141 105 184 179 149 -184 179 149 131 127 93 13 13 13 12 12 12 12 12 12 48 49 45 -168 163 120 184 179 149 156 151 111 6 7 7 14 14 13 177 172 135 -239 239 170 40 41 39 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 3 3 3 6 7 7 11 11 11 16 16 16 -18 19 18 21 22 21 23 24 24 27 29 28 32 34 33 37 39 37 -41 42 42 43 45 43 47 48 46 51 52 50 51 52 50 51 52 50 -51 52 50 49 51 48 46 47 45 40 41 39 32 34 33 25 27 26 -20 20 20 14 14 13 2 2 2 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 33 36 34 197 193 154 184 179 149 -41 42 42 0 0 0 0 0 0 0 0 0 3 3 3 184 179 149 -251 251 187 251 251 187 184 179 149 48 49 45 0 0 0 0 0 0 -16 17 12 121 119 87 177 172 135 194 189 146 188 184 146 145 141 105 -82 81 62 63 64 60 46 47 45 31 33 31 21 22 21 35 37 36 -68 70 65 51 52 50 37 39 37 27 30 29 22 24 23 17 20 20 -13 16 16 12 14 14 10 13 13 9 11 11 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 25 27 26 -38 39 37 43 45 43 51 52 50 55 56 53 60 60 56 63 64 60 -92 91 72 158 153 112 176 171 126 171 165 117 149 143 98 82 81 62 -44 46 43 38 39 37 30 32 31 71 71 57 131 127 93 160 154 106 -149 143 98 82 81 62 13 13 13 12 12 12 12 12 12 46 47 43 -121 119 87 134 131 96 96 95 69 7 7 6 38 39 37 131 127 93 -145 141 105 12 13 12 0 0 0 1 1 1 3 3 3 6 7 7 -10 10 9 12 12 12 14 14 13 16 16 16 18 19 18 21 22 21 -22 24 23 26 28 27 30 31 28 33 36 34 37 39 37 40 41 39 -41 42 42 43 45 43 46 47 45 46 47 45 46 47 45 43 45 43 -41 42 42 37 39 37 31 33 31 26 28 27 21 22 21 16 16 16 -6 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 177 172 135 251 251 187 -197 193 154 27 29 28 0 0 0 0 0 0 0 0 0 110 109 94 -239 239 170 239 239 170 184 179 149 87 86 72 2 2 1 0 0 0 -1 1 1 82 81 62 142 137 94 165 161 109 165 161 109 131 127 93 -75 75 61 55 56 53 37 39 37 25 27 26 19 20 19 32 34 33 -65 66 61 49 51 48 35 37 36 27 29 28 20 23 23 16 19 19 -13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10 -8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 22 24 23 35 37 36 -41 42 42 47 48 46 55 56 53 58 59 55 63 64 60 65 66 61 -71 71 57 131 127 93 160 154 106 160 154 106 142 137 94 82 81 62 -46 47 43 40 41 39 33 36 34 66 65 55 125 122 87 149 143 98 -142 137 94 82 81 62 17 17 17 18 19 17 14 14 13 46 47 43 -118 116 76 125 122 87 96 95 69 16 17 12 71 71 57 103 101 77 -82 81 62 11 11 11 11 11 11 13 13 13 14 14 13 14 14 13 -15 15 15 16 16 16 17 17 17 19 20 19 21 22 21 23 24 24 -26 28 27 27 29 28 31 33 31 33 36 34 35 37 36 38 39 37 -39 40 39 39 40 39 38 39 37 37 39 37 35 37 36 31 33 31 -27 29 28 24 26 24 21 22 21 17 17 17 12 12 12 2 2 2 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 68 70 65 251 251 187 -251 251 187 156 151 111 2 2 1 0 0 0 0 0 0 43 44 41 -177 172 135 184 179 149 158 153 112 103 101 77 19 20 18 0 0 0 -0 0 0 46 47 43 131 127 93 160 154 106 160 154 106 131 127 93 -71 71 57 43 45 43 30 32 31 21 22 21 16 16 16 26 28 27 -63 64 60 47 48 46 35 37 36 26 28 27 20 23 23 16 19 19 -13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10 -7 9 9 7 9 9 8 9 9 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 20 20 20 33 36 34 40 41 39 -46 47 45 51 52 50 55 57 54 60 60 56 63 64 60 65 66 61 -66 65 55 118 116 76 151 147 98 165 161 109 151 147 98 121 119 87 -96 95 69 96 95 69 96 95 69 103 101 77 142 137 94 151 147 98 -142 137 94 103 101 77 82 81 62 82 81 62 82 81 62 96 95 69 -131 127 93 142 137 94 103 101 77 46 47 43 96 95 69 118 116 76 -71 71 57 14 14 13 14 14 13 15 15 15 15 15 15 16 16 16 -16 16 16 17 17 17 18 19 18 20 20 20 21 22 21 23 24 24 -25 27 26 27 29 28 30 31 28 30 32 31 31 33 31 31 33 31 -31 33 31 31 33 31 30 31 28 27 29 28 25 27 26 22 24 23 -20 20 20 16 16 16 13 13 13 6 7 7 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -58 59 55 68 70 65 8 8 7 0 0 0 10 10 9 210 208 158 -251 251 187 184 179 149 38 39 37 0 0 0 0 0 0 8 8 7 -103 101 77 149 143 98 149 143 98 118 116 76 40 41 39 25 27 25 -53 55 47 82 81 62 144 139 99 165 161 109 165 161 109 142 137 94 -71 71 57 35 37 36 24 26 24 18 19 18 15 15 15 22 24 23 -63 64 60 46 47 45 33 36 34 26 28 27 20 23 22 17 18 17 -12 15 15 11 13 13 10 12 12 9 11 11 8 10 10 8 10 10 -7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 16 16 16 30 31 28 35 37 36 41 42 42 -47 48 46 55 56 53 58 59 55 63 64 60 65 66 61 65 66 61 -61 61 53 103 101 77 151 147 98 171 165 117 171 165 117 168 163 120 -158 153 112 158 153 112 155 149 109 151 147 98 151 147 98 160 154 106 -151 147 98 149 143 98 142 137 94 149 143 98 149 143 98 149 143 98 -155 149 109 151 147 98 131 127 93 103 101 77 125 122 87 118 116 76 -71 71 57 16 16 16 16 16 16 16 16 16 17 17 17 17 17 17 -17 17 17 17 17 17 18 19 18 19 20 19 20 20 20 21 22 21 -23 24 24 24 26 24 25 27 26 26 28 27 26 28 27 26 28 27 -25 27 26 24 26 24 22 24 23 21 22 21 19 20 19 16 16 16 -14 14 13 8 8 7 1 1 1 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -20 20 20 184 179 149 168 163 120 21 22 21 0 0 0 105 104 92 -177 172 135 145 141 105 71 71 57 0 0 0 0 0 0 0 0 0 -66 65 55 131 127 93 151 147 98 142 137 94 118 116 76 121 119 87 -145 141 105 158 153 112 176 171 126 178 174 128 176 171 126 149 145 103 -96 95 69 31 33 31 21 22 21 16 16 16 14 14 13 18 19 18 -60 60 56 46 47 45 33 36 34 25 27 26 21 22 21 15 18 18 -12 15 15 11 13 13 9 11 11 8 10 10 8 10 10 8 9 9 -7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 -8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 10 12 12 26 28 27 31 33 31 38 39 37 43 45 43 -51 52 50 55 56 53 60 60 56 63 64 60 65 66 61 68 70 65 -63 64 60 96 95 69 158 153 112 178 174 128 188 184 146 194 189 146 -194 189 146 188 184 146 184 181 136 176 171 126 171 165 117 173 167 111 -173 167 111 165 161 109 171 165 117 174 170 121 176 171 126 178 174 128 -178 174 128 174 170 121 160 154 106 149 143 98 149 143 98 125 122 87 -71 71 57 16 16 16 16 16 16 17 17 17 17 17 17 17 17 17 -17 17 17 17 17 17 17 17 17 18 19 18 19 20 19 20 20 20 -21 22 21 21 22 21 21 22 21 22 24 23 21 22 21 21 22 21 -21 22 21 19 20 19 18 19 18 16 16 16 14 14 13 11 11 11 -3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 105 104 92 197 193 154 110 109 94 9 9 8 36 38 35 -121 119 87 131 127 93 96 95 69 18 19 17 30 31 28 66 65 55 -96 95 69 142 137 94 160 154 106 160 154 106 160 154 106 168 163 120 -184 181 136 194 191 148 197 193 154 197 193 154 194 189 146 168 163 120 -125 122 87 46 47 43 18 19 18 15 15 15 13 13 13 14 14 13 -55 57 54 43 45 43 32 34 33 25 27 26 18 22 22 17 17 17 -12 14 14 10 12 12 9 11 11 8 10 10 8 9 9 7 9 9 -6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 -7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 32 34 33 41 42 42 35 37 36 39 40 39 37 39 37 -35 37 36 55 57 54 60 60 56 63 64 60 65 66 61 65 66 61 -61 63 57 115 113 82 168 163 120 194 191 148 204 201 155 210 208 158 -210 208 158 210 208 158 197 193 154 194 189 146 186 182 128 176 171 126 -174 170 121 176 171 126 186 182 128 190 186 136 194 191 148 197 193 154 -197 193 154 188 184 146 181 176 137 174 170 121 165 161 109 142 137 94 -82 81 62 24 26 24 16 16 16 16 16 16 16 16 16 16 16 16 -17 17 17 17 17 17 17 17 17 17 17 17 18 19 18 19 20 19 -19 20 19 19 20 19 20 20 20 19 20 19 19 20 19 18 19 18 -17 17 17 15 15 15 13 13 13 12 12 12 6 7 7 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 17 18 17 137 133 100 115 113 82 53 55 47 19 20 18 -103 101 77 144 139 99 137 133 100 115 113 82 137 133 100 156 151 111 -158 153 112 164 159 111 171 165 117 174 170 121 178 174 128 194 189 146 -204 201 155 214 212 158 214 212 158 214 212 158 210 208 158 188 184 146 -158 153 112 87 86 72 17 17 17 13 13 13 13 13 13 15 15 15 -55 56 53 43 45 43 32 34 33 24 26 24 17 20 20 16 16 16 -12 14 14 10 12 12 8 10 10 8 10 10 7 9 9 6 8 8 -6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9 -7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10 -8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 -8 10 10 110 109 94 84 83 72 49 51 48 26 28 27 8 10 10 -8 9 9 51 52 50 58 59 55 63 64 60 63 64 60 63 64 60 -66 65 55 134 131 96 181 176 137 210 208 158 214 212 158 239 239 170 -239 239 170 224 223 159 210 208 158 204 201 155 194 189 146 186 182 128 -186 182 128 184 181 136 194 189 146 204 201 155 210 208 158 210 208 158 -210 208 158 210 208 158 197 193 154 190 186 136 176 171 126 155 149 109 -118 116 76 36 38 35 15 15 15 16 16 16 16 16 16 16 16 16 -16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 17 17 17 -17 17 17 17 17 17 17 17 17 16 16 16 16 16 16 15 15 15 -13 13 13 12 12 12 8 8 7 2 2 2 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 53 55 47 103 101 77 96 95 69 53 55 47 -103 101 77 158 153 112 177 172 135 184 179 149 188 184 146 197 193 154 -194 189 146 190 186 136 184 181 136 184 181 136 194 189 146 210 208 158 -214 212 158 239 239 170 251 251 187 251 251 187 224 223 159 204 201 155 -177 172 135 121 119 87 30 31 28 13 13 13 12 12 12 39 40 39 -60 60 56 43 45 43 32 34 33 23 25 24 18 19 18 13 16 16 -13 13 13 9 11 11 8 10 10 8 9 9 6 8 8 6 8 8 -6 8 8 6 8 8 6 8 8 6 8 8 6 8 8 7 9 9 -7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 -7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10 -14 17 17 197 193 154 158 153 112 55 57 54 7 9 9 7 9 9 -8 10 10 51 52 50 58 59 55 60 60 56 63 64 60 63 64 60 -71 71 57 155 149 109 194 191 148 214 212 158 251 251 187 251 251 187 -251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 190 186 136 -190 186 136 194 189 146 204 201 155 210 208 158 224 223 159 239 239 170 -239 239 170 224 223 159 210 208 158 204 201 155 190 186 136 164 159 111 -125 122 87 40 41 39 15 15 15 15 15 15 15 15 15 15 15 15 -16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 -16 16 16 16 16 16 15 15 15 14 14 13 13 13 13 12 12 12 -8 9 9 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 21 22 20 96 95 69 125 122 87 121 119 87 -144 139 99 177 172 135 197 193 154 210 208 158 214 212 158 214 212 158 -210 208 158 204 201 155 194 191 148 194 189 146 204 201 155 214 212 158 -239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158 -188 184 146 145 141 105 53 55 47 12 12 12 15 15 15 63 64 60 -63 64 60 41 42 42 31 33 31 23 24 24 17 18 17 12 15 15 -11 13 13 9 11 11 8 9 9 7 9 9 6 8 8 6 8 8 -6 7 7 6 7 7 6 8 8 6 8 8 6 8 8 6 8 8 -6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 -7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 8 7 -43 45 43 251 251 187 156 151 111 8 10 10 7 9 9 7 9 9 -21 22 21 51 52 50 55 56 53 55 57 54 58 59 55 58 59 55 -75 75 61 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 214 212 158 204 201 155 194 189 146 -190 186 136 197 193 154 210 208 158 224 223 159 251 251 187 251 251 187 -251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 176 171 126 -125 122 87 36 38 35 14 14 13 14 14 13 15 15 15 15 15 15 -15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 -15 15 15 14 14 13 13 13 13 12 12 12 10 10 9 3 4 4 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 7 7 5 71 71 57 131 127 93 158 153 112 -177 172 135 197 193 154 214 212 158 239 239 170 251 251 187 251 251 187 -238 237 168 210 208 158 204 201 155 197 193 154 204 201 155 214 212 158 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158 -197 193 154 156 151 111 66 65 55 12 12 12 37 39 37 58 59 55 -58 59 55 41 42 42 31 33 31 22 24 23 17 17 17 12 14 14 -10 12 12 8 10 10 6 8 8 6 8 8 6 7 7 6 7 7 -6 7 7 5 7 7 6 7 7 6 7 7 6 8 8 6 8 8 -6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9 -7 9 9 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8 -61 63 57 197 193 154 16 19 19 6 8 8 6 8 8 8 9 9 -41 42 42 47 48 46 51 52 50 51 52 50 55 56 53 55 56 53 -71 71 57 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187 -251 251 187 251 251 187 239 239 170 214 212 158 204 201 155 194 189 146 -190 186 136 197 193 154 210 208 158 239 239 170 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 224 223 159 204 201 155 177 172 135 -121 119 87 30 31 28 13 13 13 14 14 13 14 14 13 14 14 13 -14 14 13 14 14 13 15 15 15 15 15 15 14 14 13 13 13 13 -12 12 12 12 12 12 10 10 9 4 5 5 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 48 49 45 131 127 93 174 170 121 -194 189 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187 -251 251 187 214 212 158 204 201 155 197 193 154 204 201 155 210 208 158 -239 239 170 251 251 187 251 251 187 251 251 187 239 239 170 214 212 158 -194 191 148 156 151 111 71 71 57 19 20 19 51 52 50 51 52 50 -51 52 50 41 42 42 30 32 31 21 22 21 17 17 17 13 13 13 -9 11 11 8 9 9 6 8 8 6 7 7 6 7 7 5 7 7 -5 6 5 5 6 5 5 7 7 5 7 7 6 7 7 6 7 7 -6 8 8 6 8 8 6 8 8 6 7 7 6 7 7 6 7 7 -6 7 7 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8 -55 56 53 43 45 43 6 8 8 6 8 8 6 8 8 47 48 46 -60 60 56 47 48 46 46 47 45 47 48 46 38 39 37 10 12 12 -66 65 55 145 141 105 197 193 154 214 212 158 251 251 187 251 251 187 -251 251 187 251 251 187 224 223 159 210 208 158 194 191 148 184 181 136 -184 181 136 194 189 146 204 201 155 224 223 159 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 181 176 137 -115 113 82 21 22 20 13 13 13 13 13 13 13 13 13 13 13 13 -14 14 13 13 13 13 13 13 13 13 13 13 12 12 12 11 11 11 -10 10 9 6 7 7 1 1 1 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 2 2 1 66 65 55 144 139 99 178 174 128 -204 201 155 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 214 212 158 204 201 155 194 191 148 197 193 154 204 201 155 -214 212 158 239 239 170 239 239 170 239 239 170 214 212 158 210 208 158 -184 181 136 149 145 103 66 65 55 41 42 42 47 48 46 46 47 45 -43 45 43 39 40 39 28 31 30 21 22 21 16 16 16 10 12 12 -8 10 10 6 8 8 6 7 7 6 7 7 5 6 5 5 6 5 -5 6 5 5 6 5 5 6 5 5 6 5 5 7 7 5 7 7 -6 7 7 6 7 7 6 7 7 5 7 7 5 7 7 5 7 7 -5 7 7 6 7 7 6 7 7 6 7 7 6 7 7 6 8 8 -6 8 8 6 8 8 6 7 7 6 7 7 46 47 45 156 151 111 -105 104 92 58 59 55 43 45 43 32 34 33 6 8 8 6 8 8 -49 51 48 125 122 87 181 176 137 204 201 155 214 212 158 239 239 170 -239 239 170 214 212 158 210 208 158 197 193 154 181 176 137 176 171 126 -176 171 126 184 181 136 197 193 154 210 208 158 239 239 170 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135 -99 98 80 13 13 13 12 12 12 12 12 12 13 13 13 12 12 12 -12 12 12 12 12 12 11 11 11 11 11 11 8 9 9 4 5 5 -1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 1 1 0 61 61 53 142 137 94 181 176 137 -204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187 -251 251 187 214 212 158 197 193 154 190 186 136 184 181 136 188 184 146 -197 193 154 204 201 155 210 208 158 210 208 158 204 201 155 194 189 146 -176 171 126 134 131 96 66 65 55 43 45 43 41 42 42 39 40 39 -35 37 36 33 36 34 27 29 28 20 20 20 15 15 15 9 11 11 -8 9 9 6 7 7 5 6 5 5 6 5 4 5 5 4 5 5 -4 5 5 4 5 5 4 5 5 4 5 5 5 6 5 4 5 5 -4 5 5 5 6 5 4 5 5 5 6 5 5 6 5 5 6 5 -5 7 7 5 7 7 5 7 7 5 7 7 5 7 7 5 7 7 -6 7 7 6 7 7 6 7 7 28 31 30 184 179 149 184 179 149 -145 141 105 84 83 72 27 29 28 5 7 7 5 6 5 16 16 16 -43 44 41 96 95 69 158 153 112 188 184 146 204 201 155 210 208 158 -204 201 155 197 193 154 184 179 149 177 172 135 168 163 120 164 159 111 -164 159 111 174 170 121 184 181 136 197 193 154 214 212 158 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135 -71 71 57 11 11 11 12 12 12 11 11 11 11 11 11 11 11 11 -10 10 9 10 10 9 8 8 7 3 4 4 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 31 33 31 121 119 87 176 171 126 -197 193 154 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187 -239 239 170 210 208 158 194 189 146 178 174 128 174 170 121 176 171 126 -177 172 135 181 176 137 184 179 149 184 179 149 181 176 137 178 174 128 -158 153 112 121 119 87 53 55 47 37 39 37 33 36 34 30 32 31 -27 29 28 25 27 26 24 26 24 19 20 19 13 13 13 8 10 10 -6 8 8 6 7 7 5 6 5 4 5 5 4 5 5 4 5 5 -4 5 5 4 5 5 4 5 5 3 4 4 3 4 4 4 5 5 -4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 -5 6 5 5 6 5 5 6 5 5 6 5 5 6 5 5 6 5 -5 6 5 5 6 5 12 14 14 145 141 105 184 179 149 177 172 135 -90 89 73 21 22 21 5 6 5 5 6 5 4 5 5 37 39 37 -38 39 37 61 61 53 134 131 96 168 163 120 184 181 136 188 184 146 -184 179 149 177 172 135 168 163 120 164 159 111 155 149 109 151 147 98 -151 147 98 164 159 111 176 171 126 184 179 149 210 208 158 239 239 170 -251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 158 153 112 -46 47 43 10 10 9 10 10 9 10 10 9 8 9 9 8 9 9 -6 7 7 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 13 12 7 82 81 62 158 153 112 -188 184 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187 -224 223 159 204 201 155 184 181 136 171 165 117 164 159 111 160 154 106 -158 153 112 164 159 111 168 163 120 168 163 120 168 163 120 164 159 111 -142 137 94 96 95 69 43 44 41 27 29 28 26 28 27 23 24 24 -21 22 21 18 19 18 17 17 17 18 19 18 13 13 13 8 8 7 -6 7 7 5 6 5 4 5 5 3 4 4 3 4 4 3 4 4 -3 4 4 3 4 4 3 3 3 3 3 3 3 4 4 3 4 4 -3 4 4 3 4 4 4 5 5 4 5 5 4 5 5 4 5 5 -4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 -4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 -4 5 5 4 5 5 4 5 5 4 5 5 31 33 31 65 66 61 -37 39 37 38 39 37 96 95 69 144 139 99 168 163 120 174 170 121 -168 163 120 164 159 111 155 149 109 149 145 103 149 143 98 142 137 94 -149 143 98 151 147 98 164 159 111 177 172 135 197 193 154 210 208 158 -251 251 187 251 251 187 251 251 187 239 239 170 197 193 154 137 133 100 -24 26 24 8 9 9 8 9 9 8 8 7 6 7 7 2 2 2 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 46 47 43 125 122 87 -176 171 126 197 193 154 210 208 158 239 239 170 251 251 187 239 239 170 -214 212 158 197 193 154 181 176 137 164 159 111 151 147 98 149 143 98 -149 143 98 149 143 98 149 145 103 155 149 109 160 154 106 149 143 98 -118 116 76 82 81 62 30 31 28 21 22 21 19 20 19 17 17 17 -14 14 13 12 12 12 10 10 9 12 12 12 10 12 12 6 8 8 -4 5 5 3 4 4 3 4 4 3 4 4 3 3 3 3 3 3 -3 3 3 3 3 3 3 3 3 3 3 3 2 3 3 2 3 3 -3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 4 5 5 -4 5 5 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 -4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 -4 5 5 3 4 4 3 4 4 23 24 24 110 109 94 72 73 67 -39 40 39 22 24 23 46 47 43 103 101 77 142 137 94 155 149 109 -160 154 106 155 149 109 149 143 98 142 137 94 142 137 94 142 137 94 -142 137 94 149 143 98 155 149 109 176 171 126 184 179 149 210 208 158 -239 239 170 251 251 187 251 251 187 214 212 158 184 179 149 105 104 92 -10 10 9 6 7 7 3 4 4 1 1 1 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 12 12 9 82 81 62 -149 145 103 181 176 137 197 193 154 210 208 158 214 212 158 214 212 158 -210 208 158 197 193 154 177 172 135 158 153 112 149 143 98 142 137 94 -142 137 94 142 137 94 149 143 98 151 147 98 151 147 98 131 127 93 -103 101 77 71 71 57 22 24 23 15 15 15 13 13 13 11 11 11 -8 9 9 6 7 7 6 7 7 4 5 5 8 9 9 6 7 7 -4 5 5 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 -2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 -2 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4 -3 4 4 3 4 4 3 3 3 3 4 4 3 4 4 3 4 4 -3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 -3 4 4 3 4 4 21 22 21 145 141 105 145 141 105 72 73 67 -17 18 17 3 4 4 21 22 20 66 65 55 118 116 76 142 137 94 -149 143 98 151 147 98 149 143 98 142 137 94 142 137 94 142 137 94 -142 137 94 149 143 98 155 149 109 168 163 120 184 179 149 210 208 158 -239 239 170 251 251 187 251 251 187 210 208 158 177 172 135 71 71 57 -3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35 -115 113 82 158 153 112 181 176 137 197 193 154 204 201 155 210 208 158 -204 201 155 188 184 146 177 172 135 164 159 111 149 145 103 142 137 94 -142 137 94 142 137 94 149 143 98 151 147 98 149 143 98 125 122 87 -96 95 69 61 61 53 16 17 12 8 9 9 8 8 7 6 7 7 -4 5 5 3 4 4 3 3 3 3 3 3 3 3 3 5 6 5 -3 4 4 2 3 3 2 2 2 2 2 2 2 2 2 2 2 2 -2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 -2 2 2 2 2 2 2 3 3 2 3 3 2 3 3 2 3 3 -3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 -3 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4 -3 4 4 3 4 4 3 4 4 8 9 9 8 8 7 3 3 3 -3 3 3 3 3 3 9 9 8 36 38 35 82 81 62 118 116 76 -142 137 94 151 147 98 151 147 98 151 147 98 149 143 98 149 143 98 -149 143 98 151 147 98 160 154 106 176 171 126 188 184 146 210 208 158 -239 239 170 251 251 187 239 239 170 210 208 158 156 151 111 31 33 31 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5 -66 65 55 125 122 87 158 153 112 181 176 137 194 189 146 197 193 154 -197 193 154 184 179 149 177 172 135 168 163 120 156 151 111 151 147 98 -151 147 98 151 147 98 151 147 98 161 156 96 149 143 98 118 116 76 -82 81 62 53 55 47 12 12 9 4 5 5 3 4 4 3 3 3 -3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1 2 2 -3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 -1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 -1 2 2 1 2 2 1 2 2 2 2 2 2 2 2 2 3 3 -2 3 3 2 3 3 2 3 3 2 3 3 2 2 2 2 2 2 -2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 -2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 3 3 3 -3 3 3 3 3 3 72 73 67 61 61 53 53 55 47 96 95 69 -131 127 93 151 147 98 161 156 96 161 156 96 151 147 98 151 147 98 -161 156 96 160 154 106 164 159 111 177 172 135 197 193 154 210 208 158 -239 239 170 251 251 187 224 223 159 197 193 154 131 127 93 9 9 8 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -24 26 24 82 81 62 131 127 93 164 159 111 178 174 128 188 184 146 -188 184 146 188 184 146 181 176 137 176 171 126 168 163 120 164 159 111 -160 154 106 160 154 106 160 154 106 160 154 106 151 147 98 125 122 87 -82 81 62 61 61 53 12 12 9 3 3 3 3 3 3 2 2 2 -2 2 2 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 -0 0 0 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 2 2 1 2 2 1 2 2 1 2 2 -1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 -2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 -2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 -2 3 3 30 32 31 72 73 67 31 33 31 36 38 35 82 81 62 -118 116 76 149 143 98 161 156 96 161 156 96 161 156 96 160 154 106 -165 161 109 165 161 109 176 171 126 188 184 146 204 201 155 214 212 158 -239 239 170 239 239 170 214 212 158 184 179 149 82 81 62 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -2 2 2 43 44 41 96 95 69 131 127 93 160 154 106 176 171 126 -184 181 136 184 181 136 184 181 136 181 176 137 178 174 128 174 170 121 -171 165 117 173 167 111 173 167 111 173 167 111 160 154 106 131 127 93 -96 95 69 66 65 55 16 17 12 2 2 2 1 1 1 1 1 1 -1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2 -2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 -2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 -2 2 2 2 2 2 2 2 2 10 9 6 30 31 28 71 71 57 -118 116 76 149 143 98 165 161 109 165 161 109 165 161 109 173 167 111 -173 167 111 176 171 126 184 181 136 197 193 154 210 208 158 224 223 159 -251 251 187 239 239 170 210 208 158 168 163 120 40 41 39 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 13 12 7 61 61 53 96 95 69 131 127 93 160 154 106 -176 171 126 184 181 136 184 181 136 188 184 146 184 181 136 184 181 136 -184 181 136 186 182 128 186 182 128 178 174 128 174 170 121 149 145 103 -118 116 76 82 81 62 21 22 20 1 1 1 1 1 1 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 -1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2 -2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 -2 2 2 2 2 2 2 2 2 3 3 3 30 31 28 66 65 55 -118 116 76 149 143 98 165 161 109 173 167 111 173 167 111 174 170 121 -186 182 128 190 186 136 197 193 154 210 208 158 224 223 159 251 251 187 -251 251 187 239 239 170 197 193 154 137 133 100 12 12 9 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 30 31 28 71 71 57 103 101 77 134 131 96 -164 159 111 176 171 126 184 181 136 188 184 146 194 189 146 197 193 154 -197 193 154 197 193 154 194 191 148 194 189 146 190 186 136 176 171 126 -145 141 105 103 101 77 40 41 39 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 -1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 -1 2 2 1 2 2 1 2 2 1 2 2 30 31 28 71 71 57 -118 116 76 160 154 106 173 167 111 178 174 128 186 182 128 190 186 136 -194 191 148 204 201 155 210 208 158 224 223 159 251 251 187 251 251 187 -251 251 187 214 212 158 184 179 149 84 83 72 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 5 5 3 43 44 41 82 81 62 103 101 77 -142 137 94 165 161 109 178 174 128 190 186 136 197 193 154 204 201 155 -210 208 158 210 208 158 210 208 158 210 208 158 210 208 158 197 193 154 -177 172 135 145 141 105 79 78 62 5 4 3 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 2 2 1 2 2 30 31 28 82 81 62 -142 137 94 165 161 109 178 174 128 190 186 136 194 191 148 204 201 155 -210 208 158 214 212 158 239 239 170 251 251 187 251 251 187 251 251 187 -251 251 187 210 208 158 168 163 120 36 38 35 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 16 17 12 53 55 47 82 81 62 -118 116 76 151 147 98 171 165 117 184 181 136 194 191 148 210 208 158 -214 212 158 224 223 159 239 239 170 239 239 170 224 223 159 214 212 158 -197 193 154 176 171 126 115 113 82 24 26 24 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 40 41 39 103 101 77 -151 147 98 176 171 126 190 186 136 197 193 154 210 208 158 214 212 158 -239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -239 239 170 197 193 154 110 109 94 3 4 3 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 30 31 28 66 65 55 -96 95 69 125 122 87 160 154 106 178 174 128 194 189 146 204 201 155 -214 212 158 239 239 170 251 251 187 251 251 187 251 251 187 239 239 170 -210 208 158 188 184 146 149 145 103 61 61 53 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 61 61 53 131 127 93 -164 159 111 184 181 136 197 193 154 210 208 158 224 223 159 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 -210 208 158 168 163 120 43 44 41 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 4 3 2 36 38 35 -71 71 57 96 95 69 142 137 94 165 161 109 184 181 136 197 193 154 -210 208 158 239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 -214 212 158 197 193 154 168 163 120 103 101 77 7 7 5 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -1 1 1 0 0 0 0 0 0 0 0 0 82 81 62 142 137 94 -174 170 121 194 189 146 210 208 158 224 223 159 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 224 223 159 -184 179 149 99 98 80 3 3 3 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5 -43 44 41 82 81 62 118 116 76 142 137 94 171 165 117 190 186 136 -204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187 -214 212 158 197 193 154 174 170 121 125 122 87 30 31 28 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 3 4 3 82 81 62 149 143 98 -176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 251 251 187 239 239 170 204 201 155 -145 141 105 30 31 28 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -10 9 6 46 47 43 82 81 62 118 116 76 149 143 98 174 170 121 -194 189 146 210 208 158 224 223 159 251 251 187 251 251 187 224 223 159 -210 208 158 194 191 148 174 170 121 134 131 96 53 55 47 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98 -176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187 -251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 177 172 135 -75 75 61 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 10 9 6 46 47 43 82 81 62 118 116 76 149 143 98 -176 171 126 194 191 148 210 208 158 214 212 158 214 212 158 210 208 158 -197 193 154 184 181 136 164 159 111 131 127 93 53 55 47 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98 -174 170 121 194 189 146 204 201 155 214 212 158 239 239 170 251 251 187 -251 251 187 251 251 187 239 239 170 210 208 158 184 179 149 110 109 94 -12 12 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 10 9 6 43 44 41 82 81 62 115 113 82 -144 139 99 168 163 120 188 184 146 197 193 154 197 193 154 194 189 146 -184 181 136 174 170 121 151 147 98 118 116 76 36 38 35 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 4 3 2 82 81 62 142 137 94 -171 165 117 186 182 128 194 191 148 210 208 158 214 212 158 224 223 159 -239 239 170 224 223 159 210 208 158 184 179 149 137 133 100 36 38 35 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 7 7 5 36 38 35 71 71 57 -103 101 77 131 127 93 155 149 109 168 163 120 168 163 120 168 163 120 -164 159 111 149 143 98 125 122 87 82 81 62 13 12 7 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 61 61 53 125 122 87 -160 154 106 174 170 121 184 181 136 194 189 146 204 201 155 210 208 158 -210 208 158 204 201 155 184 179 149 145 141 105 61 61 53 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 3 3 2 30 31 28 -61 61 53 82 81 62 103 101 77 121 119 87 125 122 87 125 122 87 -118 116 76 103 101 77 79 78 62 24 26 24 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 25 27 25 96 95 69 -142 137 94 160 154 106 171 165 117 178 174 128 184 181 136 184 181 136 -181 176 137 177 172 135 145 141 105 75 75 61 5 5 3 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -16 17 12 40 41 39 61 61 53 71 71 57 71 71 57 71 71 57 -66 65 55 43 44 41 12 12 9 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 46 47 43 -96 95 69 125 122 87 142 137 94 149 145 103 155 149 109 155 149 109 -145 141 105 121 119 87 66 65 55 7 7 5 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 1 1 1 16 17 12 24 26 24 25 27 25 19 20 18 -7 7 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 1 -25 27 25 61 61 53 82 81 62 96 95 69 96 95 69 82 81 62 -61 61 53 25 27 25 2 2 1 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 5 6 5 13 12 7 10 9 6 3 4 3 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 6 6 6 10 10 10 10 10 10 + 10 10 10 6 6 6 6 6 6 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 6 6 6 10 10 10 14 14 14 + 22 22 22 26 26 26 30 30 30 34 34 34 + 30 30 30 30 30 30 26 26 26 18 18 18 + 14 14 14 10 10 10 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 1 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 14 14 14 26 26 26 42 42 42 + 54 54 54 66 66 66 78 78 78 78 78 78 + 78 78 78 74 74 74 66 66 66 54 54 54 + 42 42 42 26 26 26 18 18 18 10 10 10 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 1 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 22 22 22 42 42 42 66 66 66 86 86 86 + 66 66 66 38 38 38 38 38 38 22 22 22 + 26 26 26 34 34 34 54 54 54 66 66 66 + 86 86 86 70 70 70 46 46 46 26 26 26 + 14 14 14 6 6 6 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 1 0 0 1 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 10 10 10 26 26 26 + 50 50 50 82 82 82 58 58 58 6 6 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 6 6 6 54 54 54 86 86 86 66 66 66 + 38 38 38 18 18 18 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 6 6 6 22 22 22 50 50 50 + 78 78 78 34 34 34 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 6 6 6 70 70 70 + 78 78 78 46 46 46 22 22 22 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 1 0 0 1 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 18 18 18 42 42 42 82 82 82 + 26 26 26 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 14 14 14 + 46 46 46 34 34 34 6 6 6 2 2 6 + 42 42 42 78 78 78 42 42 42 18 18 18 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 1 0 0 0 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 10 10 10 30 30 30 66 66 66 58 58 58 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 26 26 26 + 86 86 86 101 101 101 46 46 46 10 10 10 + 2 2 6 58 58 58 70 70 70 34 34 34 + 10 10 10 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 1 0 0 1 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 14 14 14 42 42 42 86 86 86 10 10 10 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 30 30 30 + 94 94 94 94 94 94 58 58 58 26 26 26 + 2 2 6 6 6 6 78 78 78 54 54 54 + 22 22 22 6 6 6 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 22 22 22 62 62 62 62 62 62 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 26 26 26 + 54 54 54 38 38 38 18 18 18 10 10 10 + 2 2 6 2 2 6 34 34 34 82 82 82 + 38 38 38 14 14 14 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 1 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 30 30 30 78 78 78 30 30 30 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 10 10 10 + 10 10 10 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 78 78 78 + 50 50 50 18 18 18 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 1 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 38 38 38 86 86 86 14 14 14 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 54 54 54 + 66 66 66 26 26 26 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 1 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 42 42 42 82 82 82 2 2 6 2 2 6 + 2 2 6 6 6 6 10 10 10 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 6 6 6 + 14 14 14 10 10 10 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 18 18 18 + 82 82 82 34 34 34 10 10 10 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 1 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 46 46 46 86 86 86 2 2 6 2 2 6 + 6 6 6 6 6 6 22 22 22 34 34 34 + 6 6 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 18 18 18 34 34 34 + 10 10 10 50 50 50 22 22 22 2 2 6 + 2 2 6 2 2 6 2 2 6 10 10 10 + 86 86 86 42 42 42 14 14 14 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 1 0 0 1 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 46 46 46 86 86 86 2 2 6 2 2 6 + 38 38 38 116 116 116 94 94 94 22 22 22 + 22 22 22 2 2 6 2 2 6 2 2 6 + 14 14 14 86 86 86 138 138 138 162 162 162 +154 154 154 38 38 38 26 26 26 6 6 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 86 86 86 46 46 46 14 14 14 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 46 46 46 86 86 86 2 2 6 14 14 14 +134 134 134 198 198 198 195 195 195 116 116 116 + 10 10 10 2 2 6 2 2 6 6 6 6 +101 98 89 187 187 187 210 210 210 218 218 218 +214 214 214 134 134 134 14 14 14 6 6 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 86 86 86 50 50 50 18 18 18 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 1 0 0 0 + 0 0 1 0 0 1 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 46 46 46 86 86 86 2 2 6 54 54 54 +218 218 218 195 195 195 226 226 226 246 246 246 + 58 58 58 2 2 6 2 2 6 30 30 30 +210 210 210 253 253 253 174 174 174 123 123 123 +221 221 221 234 234 234 74 74 74 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 70 70 70 58 58 58 22 22 22 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 46 46 46 82 82 82 2 2 6 106 106 106 +170 170 170 26 26 26 86 86 86 226 226 226 +123 123 123 10 10 10 14 14 14 46 46 46 +231 231 231 190 190 190 6 6 6 70 70 70 + 90 90 90 238 238 238 158 158 158 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 70 70 70 58 58 58 22 22 22 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 1 0 0 0 + 0 0 1 0 0 1 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 42 42 42 86 86 86 6 6 6 116 116 116 +106 106 106 6 6 6 70 70 70 149 149 149 +128 128 128 18 18 18 38 38 38 54 54 54 +221 221 221 106 106 106 2 2 6 14 14 14 + 46 46 46 190 190 190 198 198 198 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 74 74 74 62 62 62 22 22 22 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 1 0 0 0 + 0 0 1 0 0 0 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 42 42 42 94 94 94 14 14 14 101 101 101 +128 128 128 2 2 6 18 18 18 116 116 116 +118 98 46 121 92 8 121 92 8 98 78 10 +162 162 162 106 106 106 2 2 6 2 2 6 + 2 2 6 195 195 195 195 195 195 6 6 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 74 74 74 62 62 62 22 22 22 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 1 0 0 1 + 0 0 1 0 0 0 0 0 1 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 38 38 38 90 90 90 14 14 14 58 58 58 +210 210 210 26 26 26 54 38 6 154 114 10 +226 170 11 236 186 11 225 175 15 184 144 12 +215 174 15 175 146 61 37 26 9 2 2 6 + 70 70 70 246 246 246 138 138 138 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 70 70 70 66 66 66 26 26 26 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 38 38 38 86 86 86 14 14 14 10 10 10 +195 195 195 188 164 115 192 133 9 225 175 15 +239 182 13 234 190 10 232 195 16 232 200 30 +245 207 45 241 208 19 232 195 16 184 144 12 +218 194 134 211 206 186 42 42 42 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 50 50 50 74 74 74 30 30 30 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 34 34 34 86 86 86 14 14 14 2 2 6 +121 87 25 192 133 9 219 162 10 239 182 13 +236 186 11 232 195 16 241 208 19 244 214 54 +246 218 60 246 218 38 246 215 20 241 208 19 +241 208 19 226 184 13 121 87 25 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 50 50 50 82 82 82 34 34 34 10 10 10 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 34 34 34 82 82 82 30 30 30 61 42 6 +180 123 7 206 145 10 230 174 11 239 182 13 +234 190 10 238 202 15 241 208 19 246 218 74 +246 218 38 246 215 20 246 215 20 246 215 20 +226 184 13 215 174 15 184 144 12 6 6 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 26 26 26 94 94 94 42 42 42 14 14 14 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 30 30 30 78 78 78 50 50 50 104 69 6 +192 133 9 216 158 10 236 178 12 236 186 11 +232 195 16 241 208 19 244 214 54 245 215 43 +246 215 20 246 215 20 241 208 19 198 155 10 +200 144 11 216 158 10 156 118 10 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 6 6 6 90 90 90 54 54 54 18 18 18 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 30 30 30 78 78 78 46 46 46 22 22 22 +137 92 6 210 162 10 239 182 13 238 190 10 +238 202 15 241 208 19 246 215 20 246 215 20 +241 208 19 203 166 17 185 133 11 210 150 10 +216 158 10 210 150 10 102 78 10 2 2 6 + 6 6 6 54 54 54 14 14 14 2 2 6 + 2 2 6 62 62 62 74 74 74 30 30 30 + 10 10 10 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 34 34 34 78 78 78 50 50 50 6 6 6 + 94 70 30 139 102 15 190 146 13 226 184 13 +232 200 30 232 195 16 215 174 15 190 146 13 +168 122 10 192 133 9 210 150 10 213 154 11 +202 150 34 182 157 106 101 98 89 2 2 6 + 2 2 6 78 78 78 116 116 116 58 58 58 + 2 2 6 22 22 22 90 90 90 46 46 46 + 18 18 18 6 6 6 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 38 38 38 86 86 86 50 50 50 6 6 6 +128 128 128 174 154 114 156 107 11 168 122 10 +198 155 10 184 144 12 197 138 11 200 144 11 +206 145 10 206 145 10 197 138 11 188 164 115 +195 195 195 198 198 198 174 174 174 14 14 14 + 2 2 6 22 22 22 116 116 116 116 116 116 + 22 22 22 2 2 6 74 74 74 70 70 70 + 30 30 30 10 10 10 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 18 18 18 + 50 50 50 101 101 101 26 26 26 10 10 10 +138 138 138 190 190 190 174 154 114 156 107 11 +197 138 11 200 144 11 197 138 11 192 133 9 +180 123 7 190 142 34 190 178 144 187 187 187 +202 202 202 221 221 221 214 214 214 66 66 66 + 2 2 6 2 2 6 50 50 50 62 62 62 + 6 6 6 2 2 6 10 10 10 90 90 90 + 50 50 50 18 18 18 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 10 10 10 34 34 34 + 74 74 74 74 74 74 2 2 6 6 6 6 +144 144 144 198 198 198 190 190 190 178 166 146 +154 121 60 156 107 11 156 107 11 168 124 44 +174 154 114 187 187 187 190 190 190 210 210 210 +246 246 246 253 253 253 253 253 253 182 182 182 + 6 6 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 62 62 62 + 74 74 74 34 34 34 14 14 14 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 10 10 10 22 22 22 54 54 54 + 94 94 94 18 18 18 2 2 6 46 46 46 +234 234 234 221 221 221 190 190 190 190 190 190 +190 190 190 187 187 187 187 187 187 190 190 190 +190 190 190 195 195 195 214 214 214 242 242 242 +253 253 253 253 253 253 253 253 253 253 253 253 + 82 82 82 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 14 14 14 + 86 86 86 54 54 54 22 22 22 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 18 18 18 46 46 46 90 90 90 + 46 46 46 18 18 18 6 6 6 182 182 182 +253 253 253 246 246 246 206 206 206 190 190 190 +190 190 190 190 190 190 190 190 190 190 190 190 +206 206 206 231 231 231 250 250 250 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +202 202 202 14 14 14 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 42 42 42 86 86 86 42 42 42 18 18 18 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 14 14 14 38 38 38 74 74 74 66 66 66 + 2 2 6 6 6 6 90 90 90 250 250 250 +253 253 253 253 253 253 238 238 238 198 198 198 +190 190 190 190 190 190 195 195 195 221 221 221 +246 246 246 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 82 82 82 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 78 78 78 70 70 70 34 34 34 + 14 14 14 6 6 6 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 34 34 34 66 66 66 78 78 78 6 6 6 + 2 2 6 18 18 18 218 218 218 253 253 253 +253 253 253 253 253 253 253 253 253 246 246 246 +226 226 226 231 231 231 246 246 246 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 178 178 178 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 18 18 18 90 90 90 62 62 62 + 30 30 30 10 10 10 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 10 10 10 26 26 26 + 58 58 58 90 90 90 18 18 18 2 2 6 + 2 2 6 110 110 110 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +250 250 250 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 231 231 231 18 18 18 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 18 18 18 94 94 94 + 54 54 54 26 26 26 10 10 10 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 6 6 6 22 22 22 50 50 50 + 90 90 90 26 26 26 2 2 6 2 2 6 + 14 14 14 195 195 195 250 250 250 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +250 250 250 242 242 242 54 54 54 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 38 38 38 + 86 86 86 50 50 50 22 22 22 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 14 14 14 38 38 38 82 82 82 + 34 34 34 2 2 6 2 2 6 2 2 6 + 42 42 42 195 195 195 246 246 246 253 253 253 +253 253 253 253 253 253 253 253 253 250 250 250 +242 242 242 242 242 242 250 250 250 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 250 250 250 246 246 246 238 238 238 +226 226 226 231 231 231 101 101 101 6 6 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 38 38 38 82 82 82 42 42 42 14 14 14 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 10 10 10 26 26 26 62 62 62 66 66 66 + 2 2 6 2 2 6 2 2 6 6 6 6 + 70 70 70 170 170 170 206 206 206 234 234 234 +246 246 246 250 250 250 250 250 250 238 238 238 +226 226 226 231 231 231 238 238 238 250 250 250 +250 250 250 250 250 250 246 246 246 231 231 231 +214 214 214 206 206 206 202 202 202 202 202 202 +198 198 198 202 202 202 182 182 182 18 18 18 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 62 62 62 66 66 66 30 30 30 + 10 10 10 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 14 14 14 42 42 42 82 82 82 18 18 18 + 2 2 6 2 2 6 2 2 6 10 10 10 + 94 94 94 182 182 182 218 218 218 242 242 242 +250 250 250 253 253 253 253 253 253 250 250 250 +234 234 234 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 246 246 246 +238 238 238 226 226 226 210 210 210 202 202 202 +195 195 195 195 195 195 210 210 210 158 158 158 + 6 6 6 14 14 14 50 50 50 14 14 14 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 6 6 6 86 86 86 46 46 46 + 18 18 18 6 6 6 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 22 22 22 54 54 54 70 70 70 2 2 6 + 2 2 6 10 10 10 2 2 6 22 22 22 +166 166 166 231 231 231 250 250 250 253 253 253 +253 253 253 253 253 253 253 253 253 250 250 250 +242 242 242 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 246 246 246 +231 231 231 206 206 206 198 198 198 226 226 226 + 94 94 94 2 2 6 6 6 6 38 38 38 + 30 30 30 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 62 62 62 66 66 66 + 26 26 26 10 10 10 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 30 30 30 74 74 74 50 50 50 2 2 6 + 26 26 26 26 26 26 2 2 6 106 106 106 +238 238 238 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 246 246 246 218 218 218 202 202 202 +210 210 210 14 14 14 2 2 6 2 2 6 + 30 30 30 22 22 22 2 2 6 2 2 6 + 2 2 6 2 2 6 18 18 18 86 86 86 + 42 42 42 14 14 14 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 42 42 42 90 90 90 22 22 22 2 2 6 + 42 42 42 2 2 6 18 18 18 218 218 218 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 250 250 250 221 221 221 +218 218 218 101 101 101 2 2 6 14 14 14 + 18 18 18 38 38 38 10 10 10 2 2 6 + 2 2 6 2 2 6 2 2 6 78 78 78 + 58 58 58 22 22 22 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 18 18 18 + 54 54 54 82 82 82 2 2 6 26 26 26 + 22 22 22 2 2 6 123 123 123 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 250 250 250 +238 238 238 198 198 198 6 6 6 38 38 38 + 58 58 58 26 26 26 38 38 38 2 2 6 + 2 2 6 2 2 6 2 2 6 46 46 46 + 78 78 78 30 30 30 10 10 10 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 10 10 10 30 30 30 + 74 74 74 58 58 58 2 2 6 42 42 42 + 2 2 6 22 22 22 231 231 231 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 250 250 250 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 246 246 246 46 46 46 38 38 38 + 42 42 42 14 14 14 38 38 38 14 14 14 + 2 2 6 2 2 6 2 2 6 6 6 6 + 86 86 86 46 46 46 14 14 14 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 6 6 6 14 14 14 42 42 42 + 90 90 90 18 18 18 18 18 18 26 26 26 + 2 2 6 116 116 116 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 250 250 250 238 238 238 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 94 94 94 6 6 6 + 2 2 6 2 2 6 10 10 10 34 34 34 + 2 2 6 2 2 6 2 2 6 2 2 6 + 74 74 74 58 58 58 22 22 22 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 10 10 10 26 26 26 66 66 66 + 82 82 82 2 2 6 38 38 38 6 6 6 + 14 14 14 210 210 210 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 246 246 246 242 242 242 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 144 144 144 2 2 6 + 2 2 6 2 2 6 2 2 6 46 46 46 + 2 2 6 2 2 6 2 2 6 2 2 6 + 42 42 42 74 74 74 30 30 30 10 10 10 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 14 14 14 42 42 42 90 90 90 + 26 26 26 6 6 6 42 42 42 2 2 6 + 74 74 74 250 250 250 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 242 242 242 242 242 242 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 182 182 182 2 2 6 + 2 2 6 2 2 6 2 2 6 46 46 46 + 2 2 6 2 2 6 2 2 6 2 2 6 + 10 10 10 86 86 86 38 38 38 10 10 10 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 10 10 10 26 26 26 66 66 66 82 82 82 + 2 2 6 22 22 22 18 18 18 2 2 6 +149 149 149 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 234 234 234 242 242 242 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 206 206 206 2 2 6 + 2 2 6 2 2 6 2 2 6 38 38 38 + 2 2 6 2 2 6 2 2 6 2 2 6 + 6 6 6 86 86 86 46 46 46 14 14 14 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 18 18 18 46 46 46 86 86 86 18 18 18 + 2 2 6 34 34 34 10 10 10 6 6 6 +210 210 210 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 234 234 234 242 242 242 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 221 221 221 6 6 6 + 2 2 6 2 2 6 6 6 6 30 30 30 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 82 82 82 54 54 54 18 18 18 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 26 26 26 66 66 66 62 62 62 2 2 6 + 2 2 6 38 38 38 10 10 10 26 26 26 +238 238 238 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 231 231 231 238 238 238 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 231 231 231 6 6 6 + 2 2 6 2 2 6 10 10 10 30 30 30 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 66 66 66 58 58 58 22 22 22 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 38 38 38 78 78 78 6 6 6 2 2 6 + 2 2 6 46 46 46 14 14 14 42 42 42 +246 246 246 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 231 231 231 242 242 242 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 234 234 234 10 10 10 + 2 2 6 2 2 6 22 22 22 14 14 14 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 66 66 66 62 62 62 22 22 22 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 18 18 18 + 50 50 50 74 74 74 2 2 6 2 2 6 + 14 14 14 70 70 70 34 34 34 62 62 62 +250 250 250 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 231 231 231 246 246 246 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 234 234 234 14 14 14 + 2 2 6 2 2 6 30 30 30 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 66 66 66 62 62 62 22 22 22 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 18 18 18 + 54 54 54 62 62 62 2 2 6 2 2 6 + 2 2 6 30 30 30 46 46 46 70 70 70 +250 250 250 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 231 231 231 246 246 246 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 226 226 226 10 10 10 + 2 2 6 6 6 6 30 30 30 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 66 66 66 58 58 58 22 22 22 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 22 22 22 + 58 58 58 62 62 62 2 2 6 2 2 6 + 2 2 6 2 2 6 30 30 30 78 78 78 +250 250 250 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 231 231 231 246 246 246 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 206 206 206 2 2 6 + 22 22 22 34 34 34 18 14 6 22 22 22 + 26 26 26 18 18 18 6 6 6 2 2 6 + 2 2 6 82 82 82 54 54 54 18 18 18 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 26 26 26 + 62 62 62 106 106 106 74 54 14 185 133 11 +210 162 10 121 92 8 6 6 6 62 62 62 +238 238 238 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 231 231 231 246 246 246 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 158 158 158 18 18 18 + 14 14 14 2 2 6 2 2 6 2 2 6 + 6 6 6 18 18 18 66 66 66 38 38 38 + 6 6 6 94 94 94 50 50 50 18 18 18 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 10 10 10 10 10 10 18 18 18 38 38 38 + 78 78 78 142 134 106 216 158 10 242 186 14 +246 190 14 246 190 14 156 118 10 10 10 10 + 90 90 90 238 238 238 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 231 231 231 250 250 250 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 246 230 190 +238 204 91 238 204 91 181 142 44 37 26 9 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 38 38 38 46 46 46 + 26 26 26 106 106 106 54 54 54 18 18 18 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 6 6 6 14 14 14 22 22 22 + 30 30 30 38 38 38 50 50 50 70 70 70 +106 106 106 190 142 34 226 170 11 242 186 14 +246 190 14 246 190 14 246 190 14 154 114 10 + 6 6 6 74 74 74 226 226 226 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 231 231 231 250 250 250 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 228 184 62 +241 196 14 241 208 19 232 195 16 38 30 10 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 6 6 6 30 30 30 26 26 26 +203 166 17 154 142 90 66 66 66 26 26 26 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 18 18 18 38 38 38 58 58 58 + 78 78 78 86 86 86 101 101 101 123 123 123 +175 146 61 210 150 10 234 174 13 246 186 14 +246 190 14 246 190 14 246 190 14 238 190 10 +102 78 10 2 2 6 46 46 46 198 198 198 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 234 234 234 242 242 242 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 224 178 62 +242 186 14 241 196 14 210 166 10 22 18 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 6 6 6 121 92 8 +238 202 15 232 195 16 82 82 82 34 34 34 + 10 10 10 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 14 14 14 38 38 38 70 70 70 154 122 46 +190 142 34 200 144 11 197 138 11 197 138 11 +213 154 11 226 170 11 242 186 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +225 175 15 46 32 6 2 2 6 22 22 22 +158 158 158 250 250 250 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 250 250 250 242 242 242 224 178 62 +239 182 13 236 186 11 213 154 11 46 32 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 61 42 6 225 175 15 +238 190 10 236 186 11 112 100 78 42 42 42 + 14 14 14 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 22 22 22 54 54 54 154 122 46 213 154 11 +226 170 11 230 174 11 226 170 11 226 170 11 +236 178 12 242 186 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +241 196 14 184 144 12 10 10 10 2 2 6 + 6 6 6 116 116 116 242 242 242 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 231 231 231 198 198 198 214 170 54 +236 178 12 236 178 12 210 150 10 137 92 6 + 18 14 6 2 2 6 2 2 6 2 2 6 + 6 6 6 70 47 6 200 144 11 236 178 12 +239 182 13 239 182 13 124 112 88 58 58 58 + 22 22 22 6 6 6 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 30 30 30 70 70 70 180 133 36 226 170 11 +239 182 13 242 186 14 242 186 14 246 186 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 232 195 16 98 70 6 2 2 6 + 2 2 6 2 2 6 66 66 66 221 221 221 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 206 206 206 198 198 198 214 166 58 +230 174 11 230 174 11 216 158 10 192 133 9 +163 110 8 116 81 8 102 78 10 116 81 8 +167 114 7 197 138 11 226 170 11 239 182 13 +242 186 14 242 186 14 162 146 94 78 78 78 + 34 34 34 14 14 14 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 30 30 30 78 78 78 190 142 34 226 170 11 +239 182 13 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 241 196 14 203 166 17 22 18 6 + 2 2 6 2 2 6 2 2 6 38 38 38 +218 218 218 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +250 250 250 206 206 206 198 198 198 202 162 69 +226 170 11 236 178 12 224 166 10 210 150 10 +200 144 11 197 138 11 192 133 9 197 138 11 +210 150 10 226 170 11 242 186 14 246 190 14 +246 190 14 246 186 14 225 175 15 124 112 88 + 62 62 62 30 30 30 14 14 14 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 30 30 30 78 78 78 174 135 50 224 166 10 +239 182 13 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 241 196 14 139 102 15 + 2 2 6 2 2 6 2 2 6 2 2 6 + 78 78 78 250 250 250 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +250 250 250 214 214 214 198 198 198 190 150 46 +219 162 10 236 178 12 234 174 13 224 166 10 +216 158 10 213 154 11 213 154 11 216 158 10 +226 170 11 239 182 13 246 190 14 246 190 14 +246 190 14 246 190 14 242 186 14 206 162 42 +101 101 101 58 58 58 30 30 30 14 14 14 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 30 30 30 74 74 74 174 135 50 216 158 10 +236 178 12 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 241 196 14 226 184 13 + 61 42 6 2 2 6 2 2 6 2 2 6 + 22 22 22 238 238 238 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 226 226 226 187 187 187 180 133 36 +216 158 10 236 178 12 239 182 13 236 178 12 +230 174 11 226 170 11 226 170 11 230 174 11 +236 178 12 242 186 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 186 14 239 182 13 +206 162 42 106 106 106 66 66 66 34 34 34 + 14 14 14 6 6 6 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 26 26 26 70 70 70 163 133 67 213 154 11 +236 178 12 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 241 196 14 +190 146 13 18 14 6 2 2 6 2 2 6 + 46 46 46 246 246 246 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 221 221 221 86 86 86 156 107 11 +216 158 10 236 178 12 242 186 14 246 186 14 +242 186 14 239 182 13 239 182 13 242 186 14 +242 186 14 246 186 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +242 186 14 225 175 15 142 122 72 66 66 66 + 30 30 30 10 10 10 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 26 26 26 70 70 70 163 133 67 210 150 10 +236 178 12 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +232 195 16 121 92 8 34 34 34 106 106 106 +221 221 221 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +242 242 242 82 82 82 18 14 6 163 110 8 +216 158 10 236 178 12 242 186 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 242 186 14 163 133 67 + 46 46 46 18 18 18 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 10 10 10 + 30 30 30 78 78 78 163 133 67 210 150 10 +236 178 12 246 186 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +241 196 14 215 174 15 190 178 144 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 218 218 218 + 58 58 58 2 2 6 22 18 6 167 114 7 +216 158 10 236 178 12 246 186 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 186 14 242 186 14 190 150 46 + 54 54 54 22 22 22 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 38 38 38 86 86 86 180 133 36 213 154 11 +236 178 12 246 186 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 232 195 16 190 146 13 214 214 214 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 250 250 250 170 170 170 26 26 26 + 2 2 6 2 2 6 37 26 9 163 110 8 +219 162 10 239 182 13 246 186 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 186 14 236 178 12 224 166 10 142 122 72 + 46 46 46 18 18 18 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 18 18 18 + 50 50 50 109 106 95 192 133 9 224 166 10 +242 186 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +242 186 14 226 184 13 210 162 10 142 110 46 +226 226 226 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +253 253 253 253 253 253 253 253 253 253 253 253 +198 198 198 66 66 66 2 2 6 2 2 6 + 2 2 6 2 2 6 50 34 6 156 107 11 +219 162 10 239 182 13 246 186 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 242 186 14 +234 174 13 213 154 11 154 122 46 66 66 66 + 30 30 30 10 10 10 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 22 22 22 + 58 58 58 154 121 60 206 145 10 234 174 13 +242 186 14 246 186 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 186 14 236 178 12 210 162 10 163 110 8 + 61 42 6 138 138 138 218 218 218 250 250 250 +253 253 253 253 253 253 253 253 253 250 250 250 +242 242 242 210 210 210 144 144 144 66 66 66 + 6 6 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 61 42 6 163 110 8 +216 158 10 236 178 12 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 239 182 13 230 174 11 216 158 10 +190 142 34 124 112 88 70 70 70 38 38 38 + 18 18 18 6 6 6 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 22 22 22 + 62 62 62 168 124 44 206 145 10 224 166 10 +236 178 12 239 182 13 242 186 14 242 186 14 +246 186 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 236 178 12 216 158 10 175 118 6 + 80 54 7 2 2 6 6 6 6 30 30 30 + 54 54 54 62 62 62 50 50 50 38 38 38 + 14 14 14 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 6 6 6 80 54 7 167 114 7 +213 154 11 236 178 12 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 190 14 242 186 14 239 182 13 239 182 13 +230 174 11 210 150 10 174 135 50 124 112 88 + 82 82 82 54 54 54 34 34 34 18 18 18 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 18 18 18 + 50 50 50 158 118 36 192 133 9 200 144 11 +216 158 10 219 162 10 224 166 10 226 170 11 +230 174 11 236 178 12 239 182 13 239 182 13 +242 186 14 246 186 14 246 190 14 246 190 14 +246 190 14 246 190 14 246 190 14 246 190 14 +246 186 14 230 174 11 210 150 10 163 110 8 +104 69 6 10 10 10 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 6 6 6 91 60 6 167 114 7 +206 145 10 230 174 11 242 186 14 246 190 14 +246 190 14 246 190 14 246 186 14 242 186 14 +239 182 13 230 174 11 224 166 10 213 154 11 +180 133 36 124 112 88 86 86 86 58 58 58 + 38 38 38 22 22 22 10 10 10 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 14 14 14 + 34 34 34 70 70 70 138 110 50 158 118 36 +167 114 7 180 123 7 192 133 9 197 138 11 +200 144 11 206 145 10 213 154 11 219 162 10 +224 166 10 230 174 11 239 182 13 242 186 14 +246 186 14 246 186 14 246 186 14 246 186 14 +239 182 13 216 158 10 185 133 11 152 99 6 +104 69 6 18 14 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 2 2 6 2 2 6 2 2 6 + 2 2 6 6 6 6 80 54 7 152 99 6 +192 133 9 219 162 10 236 178 12 239 182 13 +246 186 14 242 186 14 239 182 13 236 178 12 +224 166 10 206 145 10 192 133 9 154 121 60 + 94 94 94 62 62 62 42 42 42 22 22 22 + 14 14 14 6 6 6 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 18 18 18 34 34 34 58 58 58 78 78 78 +101 98 89 124 112 88 142 110 46 156 107 11 +163 110 8 167 114 7 175 118 6 180 123 7 +185 133 11 197 138 11 210 150 10 219 162 10 +226 170 11 236 178 12 236 178 12 234 174 13 +219 162 10 197 138 11 163 110 8 130 83 6 + 91 60 6 10 10 10 2 2 6 2 2 6 + 18 18 18 38 38 38 38 38 38 38 38 38 + 38 38 38 38 38 38 38 38 38 38 38 38 + 38 38 38 38 38 38 26 26 26 2 2 6 + 2 2 6 6 6 6 70 47 6 137 92 6 +175 118 6 200 144 11 219 162 10 230 174 11 +234 174 13 230 174 11 219 162 10 210 150 10 +192 133 9 163 110 8 124 112 88 82 82 82 + 50 50 50 30 30 30 14 14 14 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 14 14 14 22 22 22 34 34 34 + 42 42 42 58 58 58 74 74 74 86 86 86 +101 98 89 122 102 70 130 98 46 121 87 25 +137 92 6 152 99 6 163 110 8 180 123 7 +185 133 11 197 138 11 206 145 10 200 144 11 +180 123 7 156 107 11 130 83 6 104 69 6 + 50 34 6 54 54 54 110 110 110 101 98 89 + 86 86 86 82 82 82 78 78 78 78 78 78 + 78 78 78 78 78 78 78 78 78 78 78 78 + 78 78 78 82 82 82 86 86 86 94 94 94 +106 106 106 101 101 101 86 66 34 124 80 6 +156 107 11 180 123 7 192 133 9 200 144 11 +206 145 10 200 144 11 192 133 9 175 118 6 +139 102 15 109 106 95 70 70 70 42 42 42 + 22 22 22 10 10 10 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 10 10 10 + 14 14 14 22 22 22 30 30 30 38 38 38 + 50 50 50 62 62 62 74 74 74 90 90 90 +101 98 89 112 100 78 121 87 25 124 80 6 +137 92 6 152 99 6 152 99 6 152 99 6 +138 86 6 124 80 6 98 70 6 86 66 30 +101 98 89 82 82 82 58 58 58 46 46 46 + 38 38 38 34 34 34 34 34 34 34 34 34 + 34 34 34 34 34 34 34 34 34 34 34 34 + 34 34 34 34 34 34 38 38 38 42 42 42 + 54 54 54 82 82 82 94 86 76 91 60 6 +134 86 6 156 107 11 167 114 7 175 118 6 +175 118 6 167 114 7 152 99 6 121 87 25 +101 98 89 62 62 62 34 34 34 18 18 18 + 6 6 6 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 6 6 6 6 6 6 10 10 10 + 18 18 18 22 22 22 30 30 30 42 42 42 + 50 50 50 66 66 66 86 86 86 101 98 89 +106 86 58 98 70 6 104 69 6 104 69 6 +104 69 6 91 60 6 82 62 34 90 90 90 + 62 62 62 38 38 38 22 22 22 14 14 14 + 10 10 10 10 10 10 10 10 10 10 10 10 + 10 10 10 10 10 10 6 6 6 10 10 10 + 10 10 10 10 10 10 10 10 10 14 14 14 + 22 22 22 42 42 42 70 70 70 89 81 66 + 80 54 7 104 69 6 124 80 6 137 92 6 +134 86 6 116 81 8 100 82 52 86 86 86 + 58 58 58 30 30 30 14 14 14 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 6 6 6 10 10 10 14 14 14 + 18 18 18 26 26 26 38 38 38 54 54 54 + 70 70 70 86 86 86 94 86 76 89 81 66 + 89 81 66 86 86 86 74 74 74 50 50 50 + 30 30 30 14 14 14 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 18 18 18 34 34 34 58 58 58 + 82 82 82 89 81 66 89 81 66 89 81 66 + 94 86 66 94 86 76 74 74 74 50 50 50 + 26 26 26 14 14 14 6 6 6 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 6 6 6 6 6 6 14 14 14 18 18 18 + 30 30 30 38 38 38 46 46 46 54 54 54 + 50 50 50 42 42 42 30 30 30 18 18 18 + 10 10 10 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 6 6 6 14 14 14 26 26 26 + 38 38 38 50 50 50 58 58 58 58 58 58 + 54 54 54 42 42 42 30 30 30 18 18 18 + 10 10 10 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 6 6 6 10 10 10 14 14 14 18 18 18 + 18 18 18 14 14 14 10 10 10 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 6 6 6 + 14 14 14 18 18 18 22 22 22 22 22 22 + 18 18 18 14 14 14 10 10 10 6 6 6 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 diff --git a/drivers/video/logo/logo_linux_vga16.ppm b/drivers/video/logo/logo_linux_vga16.ppm index 12ac3a54..1850c15 100644 --- a/drivers/video/logo/logo_linux_vga16.ppm +++ b/drivers/video/logo/logo_linux_vga16.ppm @@ -1,2739 +1,1604 @@ P3 -142 114 +# Standard 16-color Linux logo +80 80 255 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 -0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 -255 255 85 170 170 170 170 170 170 170 85 0 85 255 85 170 85 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 170 85 0 -170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 170 170 170 -170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 255 85 -255 85 85 85 255 85 170 170 170 170 85 0 170 170 170 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 85 85 85 -170 170 170 170 85 0 170 170 170 85 85 85 170 85 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 -85 85 85 85 85 85 170 85 0 85 255 85 85 85 85 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 170 85 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 170 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -170 85 0 85 255 85 170 85 0 170 85 0 170 85 0 85 255 85 -170 85 0 170 85 0 0 170 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 170 85 0 -255 255 85 170 85 0 255 255 85 255 255 85 255 255 85 170 85 0 -255 255 85 85 255 85 170 85 0 170 85 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 -85 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 -255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 -255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 85 255 85 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85 -255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 -255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 170 85 0 -170 85 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 170 85 0 255 255 85 85 255 85 255 255 85 -170 170 170 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85 -85 255 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 170 85 0 255 255 85 255 255 85 255 255 85 -255 255 255 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 -255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 -170 85 0 170 85 0 0 170 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 170 85 0 85 255 85 255 255 85 170 170 170 255 255 255 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 -255 255 85 85 255 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 255 255 85 255 255 85 255 255 85 255 255 255 255 255 85 -255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 85 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 -255 255 85 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -170 85 0 170 85 0 255 255 85 255 255 85 255 255 255 170 170 170 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 -255 255 85 85 255 85 170 85 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -255 255 85 85 255 85 255 255 85 170 170 170 255 255 255 255 255 85 -255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 85 255 85 170 85 0 -255 255 85 170 85 0 170 85 0 0 0 0 85 85 85 0 0 0 -85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170 -85 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 -170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 85 255 85 255 255 85 170 85 0 170 85 0 -170 85 0 85 255 85 255 255 85 85 85 85 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 85 255 85 170 170 170 170 170 170 -85 85 85 170 170 170 170 170 170 170 85 0 170 170 170 170 170 170 -85 255 85 170 170 170 170 85 0 170 170 170 85 255 85 255 85 85 -85 255 85 170 170 170 255 255 85 85 85 85 255 255 85 170 170 170 -85 255 85 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 255 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 -255 255 85 255 255 85 255 255 85 170 85 0 0 170 0 85 85 85 -170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 -255 85 85 85 255 85 85 85 85 255 85 85 85 85 85 170 170 170 -170 85 0 170 170 170 85 85 85 85 255 85 85 85 85 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 -170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 170 85 0 255 255 85 85 85 85 85 85 85 -255 255 85 170 170 170 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 85 85 85 170 170 170 170 85 0 170 170 170 -170 170 170 255 255 85 170 170 170 85 85 85 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 170 85 0 170 85 0 0 170 0 -0 0 0 170 85 0 170 85 0 0 170 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85 -170 170 170 85 85 85 85 85 85 170 170 170 170 85 0 85 85 85 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 170 85 0 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 -255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 -170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0 -170 85 0 255 255 85 170 85 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 255 255 85 -255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 -85 255 85 170 85 0 0 170 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 170 0 170 85 0 255 255 85 -85 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0 -85 255 85 170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 170 85 0 -255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85 -170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0 -255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 85 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 170 85 0 -0 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85 -255 255 85 85 255 85 170 85 0 170 85 0 85 255 85 170 85 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 85 255 85 -255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85 -255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 -170 85 0 170 85 0 85 255 85 170 85 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 255 255 85 -170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 -255 255 85 85 255 85 170 85 0 255 255 85 170 85 0 85 255 85 -170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 85 255 85 -170 85 0 255 255 85 170 85 0 85 255 85 170 85 0 170 85 0 -0 170 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170 -170 170 170 170 170 170 85 85 85 85 85 85 85 85 85 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 255 85 255 255 85 -170 85 0 255 255 85 255 255 85 170 85 0 85 255 85 170 85 0 -255 255 85 170 85 0 0 170 0 170 85 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 85 85 85 -85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 -255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 170 85 0 -0 170 0 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -255 255 85 255 255 85 170 85 0 0 170 0 85 85 85 85 85 85 -85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 85 85 85 -170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 170 85 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -170 170 170 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255 -255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170 -170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 -255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170 -255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 -255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 -255 255 255 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 -255 255 255 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 -255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 -255 255 255 255 255 255 170 170 170 255 255 255 255 255 255 255 255 255 -255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 -170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 -255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255 -255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 -170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 170 170 170 -170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -170 170 170 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85 -85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85 -85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 85 85 85 170 170 170 85 85 85 85 85 85 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 170 170 170 170 170 170 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 170 170 170 85 85 85 85 85 85 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 255 255 255 170 170 170 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 -170 170 170 255 255 255 170 170 170 170 170 170 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 -255 255 255 255 255 255 170 170 170 170 170 170 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 255 255 255 -255 255 255 170 170 170 170 170 170 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -170 170 170 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 -170 170 170 170 170 170 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 -170 170 170 170 170 170 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 -170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 -170 170 170 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 170 170 170 -255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 -255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 170 170 170 255 255 255 85 85 85 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255 -255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 170 170 170 255 255 255 170 170 170 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 -170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 255 255 255 255 255 255 255 255 255 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 -255 255 255 170 170 170 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 -170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 -170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -170 170 170 255 255 255 255 255 255 170 170 170 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 255 255 255 -255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 -170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -170 170 170 255 255 255 255 255 255 255 255 255 85 85 85 0 0 0 -0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 -0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255 -255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 255 255 255 255 255 255 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 -170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255 -170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 255 255 255 255 255 255 255 255 255 255 255 255 0 0 0 -0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 -85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 255 255 255 -255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 -170 170 170 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 170 170 170 85 85 85 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 -255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 -0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255 -170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 85 85 85 -170 170 170 255 255 255 255 255 255 0 0 0 0 0 0 85 85 85 -255 255 255 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 -85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255 -255 255 255 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 -85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 -85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 170 170 170 -170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 -170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 170 170 170 -170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 -255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 170 170 170 170 170 170 255 255 85 85 85 85 -85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 -85 85 85 170 170 170 170 170 170 170 170 170 170 85 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 170 85 0 -170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -170 85 0 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85 -170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255 -170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 85 85 85 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 -85 85 85 170 85 0 85 255 85 170 85 0 170 170 170 85 85 85 -85 85 85 0 0 0 0 0 0 85 85 85 170 85 0 85 255 85 -170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -85 85 85 85 85 85 170 85 0 0 0 0 85 85 85 85 85 85 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255 -255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 -170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 170 170 170 170 85 0 170 170 170 170 85 0 -85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 255 85 85 170 170 170 85 255 85 170 85 0 -85 85 85 85 85 85 170 85 0 85 85 85 170 170 170 85 85 85 -170 170 170 170 85 0 85 85 85 85 85 85 85 85 85 85 85 85 -170 85 0 85 255 85 85 85 85 85 85 85 85 85 85 170 85 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 170 170 170 -255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 85 0 170 170 170 170 85 0 85 85 85 0 0 0 -85 85 85 85 85 85 85 255 85 170 170 170 170 170 170 170 85 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 85 255 85 255 85 85 170 170 170 170 170 170 -170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 85 0 -170 170 170 85 85 85 85 255 85 170 85 0 170 170 170 170 85 0 -170 170 170 170 170 170 170 85 0 85 85 85 85 85 85 85 255 85 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 170 170 170 170 170 170 0 0 0 0 0 0 85 85 85 -170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 255 255 85 85 85 85 85 85 85 85 85 85 -85 255 85 255 85 85 170 170 170 170 85 0 170 170 170 85 255 85 -85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 -170 170 170 255 85 85 170 170 170 170 170 170 255 255 85 170 170 170 -85 255 85 170 170 170 255 85 85 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 85 85 85 -85 85 85 170 85 0 85 85 85 0 0 0 85 85 85 85 85 85 -85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 -170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 85 85 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170 -170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0 -170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 85 -170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 85 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 170 170 170 85 85 85 85 85 85 0 0 0 -85 85 85 85 85 85 170 170 170 85 85 85 170 170 170 170 85 0 -170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 170 170 -255 255 85 170 170 170 170 170 170 255 255 255 255 255 85 170 170 170 -255 255 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 255 -170 170 170 255 255 255 255 255 85 170 170 170 255 255 85 170 170 170 -255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 255 85 85 170 170 170 170 170 170 -85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 85 85 85 -85 85 85 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 -255 255 85 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 -170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170 -170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 85 255 85 170 170 170 255 255 85 255 255 255 255 255 255 -255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 -255 255 85 255 255 255 255 255 85 170 170 170 170 170 170 170 85 0 -170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 -170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85 -255 255 255 255 255 255 255 255 85 255 255 255 255 255 255 170 170 170 -255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 -85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 170 170 170 170 170 170 170 170 170 255 255 255 170 170 170 -255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 255 255 85 -170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255 -255 255 255 255 255 255 170 170 170 255 255 85 170 170 170 255 255 85 -85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170 -255 255 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 -170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 -255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 -170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 -85 85 85 170 85 0 255 255 255 170 170 170 255 255 255 255 255 255 -255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 255 255 85 255 255 255 255 255 255 -170 170 170 255 255 255 255 255 255 170 170 170 170 170 170 170 170 170 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 255 85 170 170 170 -170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255 -255 255 255 255 255 255 255 255 85 170 170 170 170 170 170 255 255 255 -170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 255 255 85 -170 170 170 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255 -255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 255 255 85 -170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255 -255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 255 255 85 -85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170 -170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 -170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 -255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 -170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85 -0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -85 85 85 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170 -255 255 255 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 -255 85 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255 -170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 170 170 -255 255 85 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255 -255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170 -170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 85 -170 170 170 170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 -170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170 -255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85 -85 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 -255 255 255 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 -170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 -255 255 255 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85 -170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 -170 170 170 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 -85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 170 170 170 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 85 255 85 -255 85 85 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255 -255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 170 170 170 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 -170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255 -170 170 170 170 170 170 255 255 85 170 170 170 255 85 85 85 255 85 -170 170 170 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 -170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 85 85 85 85 85 85 85 85 85 170 170 170 255 255 85 -170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85 -170 170 170 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170 -170 170 170 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 -170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 -255 255 255 170 170 170 170 170 170 170 85 0 170 170 170 85 85 85 -170 170 170 170 170 170 170 85 0 170 170 170 170 85 0 85 85 85 -85 255 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -85 85 85 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170 -170 85 0 170 170 170 85 255 85 170 85 0 170 170 170 85 85 85 -170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255 -255 255 85 255 255 255 170 170 170 170 170 170 170 170 170 170 85 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 -170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 170 170 -170 85 0 170 85 0 170 170 170 85 255 85 85 85 85 170 170 170 -170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 85 85 85 -0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 -170 170 170 170 85 0 170 170 170 85 85 85 170 170 170 170 85 0 -170 170 170 85 255 85 170 85 0 170 170 170 170 170 170 170 170 170 -255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -170 85 0 170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 -170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0 -170 170 170 85 255 85 170 85 0 170 170 170 170 85 0 85 85 85 -85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -85 255 85 170 170 170 170 85 0 170 170 170 170 85 0 85 255 85 -170 170 170 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85 -170 170 170 255 255 255 170 170 170 170 170 170 170 170 170 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 85 0 85 85 85 170 170 170 255 255 85 170 170 170 -170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0 -170 170 170 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85 -170 85 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 85 0 -85 85 85 255 85 85 85 255 85 170 85 0 170 170 170 170 170 170 -170 85 0 170 170 170 85 85 85 255 255 85 170 170 170 170 170 170 -255 255 255 170 170 170 255 255 255 255 255 85 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 255 255 85 85 85 85 170 170 170 -85 255 85 255 85 85 170 170 170 85 255 85 255 85 85 85 255 85 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 -85 85 85 85 255 85 255 85 85 170 170 170 85 255 85 170 85 0 -170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255 -170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 170 170 170 85 85 85 255 255 85 -170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85 -85 85 85 255 255 85 170 170 170 170 85 0 170 170 170 85 85 85 -170 85 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -170 170 170 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170 -170 85 0 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 -255 255 85 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170 -170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 85 0 -85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -170 85 0 85 255 85 170 170 170 170 170 170 255 255 85 170 170 170 -255 255 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255 -255 255 255 170 170 170 255 255 85 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 -170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 -170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 -170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170 -170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 255 -170 170 170 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 -170 85 0 170 170 170 170 85 0 255 255 85 170 170 170 170 170 170 -170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 -255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 -170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 -170 170 170 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 85 85 85 -170 85 0 85 255 85 170 170 170 170 170 170 170 170 170 255 255 85 -255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 -170 170 170 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -170 85 0 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 -170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 -255 255 255 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 -170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 -170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 255 85 -170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255 -255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 -170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 85 85 85 170 85 0 170 170 170 170 170 170 -255 255 85 170 170 170 255 255 255 255 255 85 255 255 255 255 255 255 -170 170 170 255 255 85 170 170 170 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 -170 170 170 170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 -170 170 170 255 255 255 170 170 170 255 255 255 255 255 85 255 255 255 -170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170 -170 170 170 255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 -255 255 85 170 170 170 170 170 170 170 85 0 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 -255 255 85 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255 -255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 -170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 85 85 85 85 85 85 170 85 0 170 170 170 -255 255 85 170 170 170 255 255 85 255 255 255 170 170 170 255 255 255 -170 170 170 170 170 170 170 170 170 170 170 170 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 -170 85 0 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 -255 255 255 255 255 255 170 170 170 255 255 255 255 255 85 170 170 170 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170 -170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 -255 255 85 170 170 170 170 85 0 85 255 85 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 -170 170 170 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255 -255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 -170 170 170 170 170 170 170 170 170 170 85 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -255 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 -255 255 255 170 170 170 255 255 85 170 170 170 85 85 85 85 85 85 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 170 170 170 -170 85 0 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 -170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 -170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -85 85 85 85 85 85 85 85 85 170 85 0 85 85 85 170 85 0 -85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 -85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85 -170 170 170 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 -85 85 85 85 255 85 170 85 0 170 170 170 170 85 0 170 170 170 -85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 -85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 85 85 85 85 85 85 85 85 85 + 85 85 85 85 85 85 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 85 85 85 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 85 85 85 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 170 170 170 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 +170 170 170 170 170 170 85 85 85 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 85 85 85 170 170 170 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 170 170 170 170 170 170 +170 170 170 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 85 85 85 170 170 170 170 170 170 170 170 170 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 170 170 170 255 255 255 255 255 255 +255 255 255 170 170 170 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 85 85 85 +170 170 170 170 170 170 255 255 255 255 255 255 + 0 0 0 0 0 0 0 0 0 0 0 0 +170 170 170 255 255 255 170 170 170 170 170 170 +255 255 255 170 170 170 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 85 85 85 +170 170 170 0 0 0 0 0 0 255 255 255 + 85 85 85 0 0 0 0 0 0 0 0 0 +255 255 255 170 170 170 0 0 0 85 85 85 +170 170 170 255 255 255 170 170 170 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 85 85 85 + 85 85 85 0 0 0 0 0 0 170 170 170 + 85 85 85 0 0 0 0 0 0 0 0 0 +255 255 255 85 85 85 0 0 0 0 0 0 + 85 85 85 255 255 255 170 170 170 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 85 85 85 +170 170 170 0 0 0 0 0 0 170 170 170 + 85 85 85 85 85 85 85 85 85 85 85 85 +255 255 255 85 85 85 0 0 0 0 0 0 + 85 85 85 255 255 255 170 170 170 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 +255 255 255 0 0 0 0 0 0 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 0 0 0 0 0 0 + 85 85 85 255 255 255 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 +170 170 170 170 170 170 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 170 170 170 170 170 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 85 85 85 0 0 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 170 85 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 85 85 85 0 0 0 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 170 85 0 +170 85 0 170 85 0 85 85 85 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 85 85 85 0 0 0 + 85 85 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 85 0 170 85 0 85 85 85 0 0 0 + 0 0 0 85 85 85 170 170 170 85 85 85 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 85 85 85 0 0 0 + 85 85 85 170 85 0 170 85 0 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 170 170 170 170 170 170 170 170 0 0 0 + 0 0 0 0 0 0 170 170 170 170 170 170 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 85 85 85 170 170 170 170 85 0 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 85 0 170 85 0 170 170 170 170 170 170 +170 170 170 170 170 170 170 170 170 85 85 85 + 0 0 0 0 0 0 85 85 85 85 85 85 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 85 85 85 170 170 170 170 170 170 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 170 170 170 170 170 170 170 170 170 170 170 +255 255 255 255 255 255 255 255 255 170 170 170 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 85 85 85 +255 255 255 255 255 255 170 170 170 170 170 170 +170 170 170 170 170 170 170 170 170 170 170 170 +170 170 170 170 170 170 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 170 170 170 +255 255 255 255 255 255 170 170 170 170 170 170 +170 170 170 170 170 170 170 170 170 170 170 170 +170 170 170 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +170 170 170 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 85 85 85 255 255 255 +255 255 255 255 255 255 255 255 255 170 170 170 +170 170 170 170 170 170 170 170 170 170 170 170 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 85 85 85 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 85 85 85 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 170 170 170 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 85 85 85 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 85 85 85 170 170 170 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 170 170 170 170 170 170 170 170 170 +255 255 255 255 255 255 255 255 255 170 170 170 +170 170 170 170 170 170 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +170 170 170 170 170 170 170 170 170 170 170 170 +170 170 170 170 170 170 170 170 170 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 +170 170 170 170 170 170 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +170 170 170 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 170 170 170 +170 170 170 170 170 170 170 170 170 85 85 85 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 +170 170 170 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 170 170 170 170 170 170 170 170 170 + 0 0 0 0 0 0 0 0 0 85 85 85 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 85 85 85 0 0 0 0 0 0 85 85 85 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 170 170 170 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 170 170 170 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +170 170 170 85 85 85 0 0 0 0 0 0 + 0 0 0 85 85 85 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 85 85 85 + 0 0 0 0 0 0 85 85 85 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 170 170 170 0 0 0 85 85 85 + 85 85 85 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 85 85 85 + 0 0 0 85 85 85 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 170 170 170 0 0 0 85 85 85 + 85 85 85 0 0 0 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 85 85 85 + 0 0 0 170 170 170 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 85 85 85 0 0 0 + 0 0 0 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 85 85 85 0 0 0 + 85 85 85 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 85 85 85 0 0 0 0 0 0 +170 170 170 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 85 85 85 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 85 85 85 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 85 85 85 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 0 0 0 + 85 85 85 85 85 85 85 85 85 85 85 85 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 0 0 0 170 85 0 +255 255 85 170 85 0 0 0 0 0 0 0 + 85 85 85 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 85 85 85 85 85 85 0 0 0 + 0 0 0 85 85 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 0 0 0 + 0 0 0 85 85 85 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 85 170 85 0 255 255 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 85 85 85 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 + 0 0 0 0 0 0 85 85 85 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 85 +170 85 0 255 255 85 170 85 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 +170 85 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 0 0 0 0 0 0 85 85 85 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 170 85 0 +255 255 85 170 85 0 255 255 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 170 85 0 +255 255 85 170 85 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 0 0 0 0 0 0 0 0 0 + 85 85 85 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 85 +170 85 0 255 255 85 170 85 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 255 255 85 +170 85 0 255 255 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 0 0 0 0 0 0 + 0 0 0 85 85 85 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 255 255 85 170 85 0 +255 255 85 170 85 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 0 0 0 + 0 0 0 0 0 0 85 85 85 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 170 170 170 170 170 170 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 170 170 170 170 170 170 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 170 170 170 170 170 170 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 0 0 0 0 0 0 0 0 0 + 0 0 0 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 170 170 170 170 170 170 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 0 0 0 0 0 0 0 0 0 + 85 85 85 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 170 170 170 85 85 85 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 85 85 85 85 85 85 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +170 170 170 85 85 85 85 85 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 170 170 170 + 85 85 85 0 0 0 0 0 0 170 85 0 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 85 85 85 + 0 0 0 0 0 0 0 0 0 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +170 170 170 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +170 170 170 85 85 85 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 170 85 0 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 170 85 0 +170 85 0 170 170 170 255 255 255 255 255 255 +255 255 255 255 255 255 255 255 255 255 255 255 +255 255 255 255 255 255 170 170 170 85 85 85 + 85 85 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +170 85 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 170 85 0 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 170 85 0 170 85 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 170 85 0 +170 85 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +170 85 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +170 85 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 85 85 85 170 85 0 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 170 85 0 170 85 0 170 85 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 170 85 0 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 170 85 0 +170 85 0 0 0 0 0 0 0 0 0 0 + 85 85 85 85 85 85 85 85 85 85 85 85 + 85 85 85 85 85 85 85 85 85 85 85 85 + 85 85 85 85 85 85 85 85 85 0 0 0 + 0 0 0 0 0 0 0 0 0 170 85 0 +170 85 0 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 255 255 85 170 85 0 +170 85 0 170 85 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 170 85 0 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 85 0 170 85 0 255 255 85 170 85 0 +255 255 85 170 85 0 170 85 0 170 85 0 + 85 85 85 85 85 85 85 85 85 85 85 85 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 85 85 85 + 85 85 85 85 85 85 85 85 85 170 85 0 +170 85 0 170 85 0 170 85 0 255 255 85 +170 85 0 255 255 85 170 85 0 170 85 0 +170 85 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 85 0 170 85 0 170 85 0 170 85 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 170 85 0 170 85 0 170 85 0 +170 85 0 170 85 0 170 85 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 +170 85 0 170 85 0 170 85 0 170 85 0 +170 85 0 170 85 0 170 85 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 -- cgit v0.10.2 From 5e42336a461a2354b640001323cd07cebd9ade6e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Apr 2009 19:18:22 +0100 Subject: ASoC: Fix logic in WM8350 master clocking check We need to check only if the WM8350 is master and only when starting the stream so if either is not true then we can skip the check. Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 3b1d099..0275321 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -968,7 +968,7 @@ static int wm8350_pcm_trigger(struct snd_pcm_substream *substream, * required for LRC in master mode. The DACs or ADCs need a * valid audio path i.e. pin -> ADC or DAC -> pin before * the LRC will be enabled in master mode. */ - if (!master && cmd != SNDRV_PCM_TRIGGER_START) + if (!master || cmd != SNDRV_PCM_TRIGGER_START) return 0; if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { -- cgit v0.10.2 From 0c95de73a711d376dc17afe484f919bd5b66c016 Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Mon, 27 Apr 2009 12:44:41 -0400 Subject: ASoC: Set the MPC5200 i2s driver to BROKEN status. Signed-off-by: Jon Smirl Acked-by: Grant Likely Signed-off-by: Mark Brown diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 9fc9082..e7dd79a1 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -21,7 +21,7 @@ config SND_SOC_MPC8610_HPCD config SND_SOC_MPC5200_I2S tristate "Freescale MPC5200 PSC in I2S mode driver" - depends on PPC_MPC52xx && PPC_BESTCOMM + depends on PPC_MPC52xx && PPC_BESTCOMM && BROKEN select SND_SOC_OF_SIMPLE select PPC_BESTCOMM_GEN_BD help -- cgit v0.10.2 From 010db4d127d1ae7324d5e00035fe4362e27f0508 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 27 Apr 2009 13:27:21 -0700 Subject: RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal Change thermo mitigation code to flip the SerDes1 reference clock to internal, to match the change in commit a4849fc1 ("RDMA/nes: Add wide_ppm_offset parm for switch compatibility"). Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index d6fc9ae..7e20a7f 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -550,11 +550,8 @@ struct nes_adapter *nes_init_adapter(struct nes_device *nesdev, u8 hw_rev) { msleep(1); } if (int_cnt > 1) { - u32 sds; spin_lock_irqsave(&nesadapter->phy_lock, flags); - sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1); - sds |= 0x00000040; - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds); + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, 0x0000F0C8); mh_detected++; reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET); reset_value |= 0x0000003d; @@ -579,7 +576,7 @@ struct nes_adapter *nes_init_adapter(struct nes_device *nesdev, u8 hw_rev) { if (++ext_cnt > int_cnt) { spin_lock_irqsave(&nesadapter->phy_lock, flags); nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, - 0x0000F0C8); + 0x0000F088); mh_detected++; reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET); reset_value |= 0x0000003d; -- cgit v0.10.2 From 366835e24977f4590ef353bdc70f0dda278c2a84 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 27 Apr 2009 13:28:41 -0700 Subject: RDMA/nes: Correct CDR loop filter setting for port 1 In commit 1b949324 ("RDMA/nes: Fix SFP+ PHY initialization") there is a mistake in the clean up code that removed port 1 CDR loop filter settings for 10G cards other than CX4. Put the correct setting back for appropriate PHY types. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 7e20a7f..b5d9c4b 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -761,6 +761,9 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count, return 0; /* init serdes 1 */ + if (!(OneG_Mode && (nesadapter->phy_type[1] != NES_PHY_TYPE_PUMA_1G))) + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF); + switch (nesadapter->phy_type[1]) { case NES_PHY_TYPE_ARGUS: case NES_PHY_TYPE_SFP_D: @@ -768,21 +771,20 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count, nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x00000000); break; case NES_PHY_TYPE_CX4: - sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1); - sds &= 0xFFFFFFBF; - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds); if (wide_ppm_offset) nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000FFFAA); - else - nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF); break; case NES_PHY_TYPE_PUMA_1G: sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1); sds |= 0x000000100; nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds); } - if (!OneG_Mode) + if (!OneG_Mode) { nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE1, 0x11110000); + sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1); + sds &= 0xFFFFFFBF; + nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds); + } } else { /* init serdes 0 */ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, 0x00000008); -- cgit v0.10.2 From e998c25bc29f2b409b39fa63dad3df499982a887 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 27 Apr 2009 13:29:42 -0700 Subject: RDMA/nes: Enable repause timer for port 1 Enable repause timer for port 1. Without this setting, under stress, the chip may misbehave. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index b5d9c4b..2aa0216 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -912,6 +912,12 @@ static void nes_init_csr_ne020(struct nes_device *nesdev, u8 hw_rev, u8 port_cou u32temp &= 0x7fffffff; u32temp |= 0x7fff0010; nes_write_indexed(nesdev, 0x000021f8, u32temp); + if (port_count > 1) { + u32temp = nes_read_indexed(nesdev, 0x000023f8); + u32temp &= 0x7fffffff; + u32temp |= 0x7fff0010; + nes_write_indexed(nesdev, 0x000023f8, u32temp); + } } } -- cgit v0.10.2 From 923223776b53013443d062a87e0a3d57d6513f04 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 27 Apr 2009 13:30:35 -0700 Subject: RDMA/nes: Set trace length to 1 inch for SFP_D With updated PHY firmware for SFP_D, setting the trace length to 1 inch for SFP_D provides a more stable link. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 2aa0216..b832a7b 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -1371,13 +1371,14 @@ int nes_init_phy(struct nes_device *nesdev) if (phy_type == NES_PHY_TYPE_ARGUS) { nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x000C); nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0008); + nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001); } else { nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x0004); nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0038); + nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0013); } nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc31a, 0x0098); nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0026, 0x0E00); - nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001); /* setup LEDs */ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd006, 0x0007); -- cgit v0.10.2 From 0e4562da9e533188108d00022cf3650cb9e29aae Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 27 Apr 2009 13:33:48 -0700 Subject: RDMA/nes: Fix fw_ver in /sys /sys/class/infiniband/nes?/fw_ver is not displaying firmware version properly (it shows 0.0.0 with the current code). Fill in the correct firmware version number. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 8b460c2..64d5cfd 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -2808,10 +2808,9 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, struct nes_vnic *nesvnic = nesibdev->nesvnic; nes_debug(NES_DBG_INIT, "\n"); - return sprintf(buf, "%x.%x.%x\n", - (int)(nesvnic->nesdev->nesadapter->fw_ver >> 32), - (int)(nesvnic->nesdev->nesadapter->fw_ver >> 16) & 0xffff, - (int)(nesvnic->nesdev->nesadapter->fw_ver & 0xffff)); + return sprintf(buf, "%u.%u\n", + (nesvnic->nesdev->nesadapter->firmware_version >> 16), + (nesvnic->nesdev->nesadapter->firmware_version & 0x000000ff)); } -- cgit v0.10.2 From 1f0dba1e51cfc93bf4545811839a84c879086fd4 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 27 Apr 2009 13:36:03 -0700 Subject: RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n Remove the NES_DEBUG that is causing the compile warning about an unused variable when INFINIBAND_NES_DEBUG is not enabled. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index dbd9a75..7da5437 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -854,7 +854,6 @@ static struct nes_cm_listener *find_listener(struct nes_cm_core *cm_core, { unsigned long flags; struct nes_cm_listener *listen_node; - __be32 tmp_addr = cpu_to_be32(dst_addr); /* walk list and find cm_node associated with this session ID */ spin_lock_irqsave(&cm_core->listen_list_lock, flags); @@ -871,9 +870,6 @@ static struct nes_cm_listener *find_listener(struct nes_cm_core *cm_core, } spin_unlock_irqrestore(&cm_core->listen_list_lock, flags); - nes_debug(NES_DBG_CM, "Unable to find listener for %pI4:%x\n", - &tmp_addr, dst_port); - /* no listener */ return NULL; } -- cgit v0.10.2 From 53094c388f11d79f742eaf743c9fd740a881f2c0 Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Mon, 27 Apr 2009 13:37:34 -0700 Subject: RDMA/nes: Do not set apbvt entry for loopback When a connect request comes, apbvt should only be set for non-loopback connections. Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 7da5437..1efe0be 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -2955,6 +2955,7 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) struct nes_device *nesdev; struct nes_cm_node *cm_node; struct nes_cm_info cm_info; + int apbvt_set = 0; ibqp = nes_get_qp(cm_id->device, conn_param->qpn); if (!ibqp) @@ -2992,9 +2993,11 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) conn_param->private_data_len); if (cm_id->local_addr.sin_addr.s_addr != - cm_id->remote_addr.sin_addr.s_addr) + cm_id->remote_addr.sin_addr.s_addr) { nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port), PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD); + apbvt_set = 1; + } /* set up the connection params for the node */ cm_info.loc_addr = htonl(cm_id->local_addr.sin_addr.s_addr); @@ -3011,8 +3014,7 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) conn_param->private_data_len, (void *)conn_param->private_data, &cm_info); if (!cm_node) { - if (cm_id->local_addr.sin_addr.s_addr != - cm_id->remote_addr.sin_addr.s_addr) + if (apbvt_set) nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port), PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_DEL); @@ -3021,7 +3023,7 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) return -ENOMEM; } - cm_node->apbvt_set = 1; + cm_node->apbvt_set = apbvt_set; nesqp->cm_node = cm_node; cm_node->nesqp = nesqp; nes_add_ref(&nesqp->ibqp); -- cgit v0.10.2 From c11470f9f4d4490cd7e9563f604c4c7868caf6de Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Mon, 27 Apr 2009 13:38:31 -0700 Subject: RDMA/nes: Check for sequence number wrap-around check_seq() was not checking if the seq#s have wrapped. Fix it. Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 1efe0be..1f7a659 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -56,6 +56,7 @@ #include #include #include +#include #include "nes.h" @@ -1514,7 +1515,7 @@ static int check_seq(struct nes_cm_node *cm_node, struct tcphdr *tcph, rcv_wnd = cm_node->tcp_cntxt.rcv_wnd; if (ack_seq != loc_seq_num) err = 1; - else if ((seq + rcv_wnd) < rcv_nxt) + else if (!between(seq, rcv_nxt, (rcv_nxt+rcv_wnd))) err = 1; if (err) { nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p " -- cgit v0.10.2 From 4e9c390036196f89208cf9574dfd19daae146776 Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Mon, 27 Apr 2009 13:39:36 -0700 Subject: RDMA/nes: Increase rexmit timeout interval Under heavy load with large cluster testing, it may take longer to receive a response to MPA requests. Change the driver to wait longer after each rexmit to max time value. Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 1f7a659..4969c38 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -541,6 +541,7 @@ static void nes_cm_timer_tick(unsigned long pass) struct list_head *list_node; struct nes_cm_core *cm_core = g_cm_core; u32 settimer = 0; + unsigned long timetosend; int ret = NETDEV_TX_OK; struct list_head timer_list; @@ -645,8 +646,11 @@ static void nes_cm_timer_tick(unsigned long pass) send_entry->retrycount); if (send_entry->send_retrans) { send_entry->retranscount--; + timetosend = (NES_RETRY_TIMEOUT << + (NES_DEFAULT_RETRANS - send_entry->retranscount)); + send_entry->timetosend = jiffies + - NES_RETRY_TIMEOUT; + min(timetosend, NES_MAX_TIMEOUT); if (nexttimeout > send_entry->timetosend || !settimer) { nexttimeout = send_entry->timetosend; diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h index 80bba18..8b7e7c0 100644 --- a/drivers/infiniband/hw/nes/nes_cm.h +++ b/drivers/infiniband/hw/nes/nes_cm.h @@ -149,6 +149,7 @@ struct nes_timer_entry { #endif #define NES_SHORT_TIME (10) #define NES_LONG_TIME (2000*HZ/1000) +#define NES_MAX_TIMEOUT ((unsigned long) (12*HZ)) #define NES_CM_HASHTABLE_SIZE 1024 #define NES_CM_TCP_TIMER_INTERVAL 3000 -- cgit v0.10.2 From 109d67e4f12b828113ca8ccf4a735972dd984f40 Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Mon, 27 Apr 2009 13:41:06 -0700 Subject: RDMA/nes: Fix hang issues for large cluster dynamic connections Running large cluster setup, we are hanging after many hours of testing. Fixing this required going over the code and making sure the rexmit entry was properly removed based on the cm_node's state and packet received. Also when receiving a FIN packet, check seq# and make sure there were no errors before calling handle_fin(). Following are the changes done in nes_cm.c: * handle_ack_pkt() needs to return error value, so in case of error, handle_fin() is not called. Some cleanup done while going over the code. * handle_rst_pkt(), handling of cm_node's NES_CM_STATE_LAST_ACK is missing. * process_packet(), in case of FIN only packet is received, call check_seq() before processing. * in handle_fin_pkt(), we are calling cleanup_retrans_entry() for all conditions, even if the packets need to be dropped. Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 4969c38..2c90b38 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1326,18 +1326,20 @@ static void handle_fin_pkt(struct nes_cm_node *cm_node) nes_debug(NES_DBG_CM, "Received FIN, cm_node = %p, state = %u. " "refcnt=%d\n", cm_node, cm_node->state, atomic_read(&cm_node->ref_count)); - cm_node->tcp_cntxt.rcv_nxt++; - cleanup_retrans_entry(cm_node); switch (cm_node->state) { case NES_CM_STATE_SYN_RCVD: case NES_CM_STATE_SYN_SENT: case NES_CM_STATE_ESTABLISHED: case NES_CM_STATE_MPAREQ_SENT: case NES_CM_STATE_MPAREJ_RCVD: + cm_node->tcp_cntxt.rcv_nxt++; + cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_LAST_ACK; send_fin(cm_node, NULL); break; case NES_CM_STATE_FIN_WAIT1: + cm_node->tcp_cntxt.rcv_nxt++; + cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_CLOSING; send_ack(cm_node, NULL); /* Wait for ACK as this is simultanous close.. @@ -1345,11 +1347,15 @@ static void handle_fin_pkt(struct nes_cm_node *cm_node) * Just rm the node.. Done.. */ break; case NES_CM_STATE_FIN_WAIT2: + cm_node->tcp_cntxt.rcv_nxt++; + cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_TIME_WAIT; send_ack(cm_node, NULL); schedule_nes_timer(cm_node, NULL, NES_TIMER_TYPE_CLOSE, 1, 0); break; case NES_CM_STATE_TIME_WAIT: + cm_node->tcp_cntxt.rcv_nxt++; + cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_CLOSED; rem_ref_cm_node(cm_node->cm_core, cm_node); break; @@ -1385,7 +1391,6 @@ static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, passive_state = atomic_add_return(1, &cm_node->passive_state); if (passive_state == NES_SEND_RESET_EVENT) create_event(cm_node, NES_CM_EVENT_RESET); - cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_CLOSED; dev_kfree_skb_any(skb); break; @@ -1399,17 +1404,16 @@ static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, active_open_err(cm_node, skb, reset); break; case NES_CM_STATE_CLOSED: - cleanup_retrans_entry(cm_node); drop_packet(skb); break; + case NES_CM_STATE_LAST_ACK: + cm_node->cm_id->rem_ref(cm_node->cm_id); case NES_CM_STATE_TIME_WAIT: - cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_CLOSED; rem_ref_cm_node(cm_node->cm_core, cm_node); drop_packet(skb); break; case NES_CM_STATE_FIN_WAIT1: - cleanup_retrans_entry(cm_node); nes_debug(NES_DBG_CM, "Bad state %s[%u]\n", __func__, __LINE__); default: drop_packet(skb); @@ -1456,6 +1460,7 @@ static void handle_rcv_mpa(struct nes_cm_node *cm_node, struct sk_buff *skb) NES_PASSIVE_STATE_INDICATED); break; case NES_CM_STATE_MPAREQ_SENT: + cleanup_retrans_entry(cm_node); if (res_type == NES_MPA_REQUEST_REJECT) { type = NES_CM_EVENT_MPA_REJECT; cm_node->state = NES_CM_STATE_MPAREJ_RCVD; @@ -1653,49 +1658,39 @@ static void handle_synack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, } } -static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, +static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, struct tcphdr *tcph) { int datasize = 0; u32 inc_sequence; u32 rem_seq_ack; u32 rem_seq; - int ret; + int ret = 0; int optionsize; optionsize = (tcph->doff << 2) - sizeof(struct tcphdr); if (check_seq(cm_node, tcph, skb)) - return; + return -EINVAL; skb_pull(skb, tcph->doff << 2); inc_sequence = ntohl(tcph->seq); rem_seq = ntohl(tcph->seq); rem_seq_ack = ntohl(tcph->ack_seq); datasize = skb->len; - cleanup_retrans_entry(cm_node); switch (cm_node->state) { case NES_CM_STATE_SYN_RCVD: /* Passive OPEN */ + cleanup_retrans_entry(cm_node); ret = handle_tcp_options(cm_node, tcph, skb, optionsize, 1); if (ret) break; cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq); - if (cm_node->tcp_cntxt.rem_ack_num != - cm_node->tcp_cntxt.loc_seq_num) { - nes_debug(NES_DBG_CM, "rem_ack_num != loc_seq_num\n"); - cleanup_retrans_entry(cm_node); - send_reset(cm_node, skb); - return; - } cm_node->state = NES_CM_STATE_ESTABLISHED; - cleanup_retrans_entry(cm_node); if (datasize) { cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize; handle_rcv_mpa(cm_node, skb); - } else { /* rcvd ACK only */ + } else /* rcvd ACK only */ dev_kfree_skb_any(skb); - cleanup_retrans_entry(cm_node); - } break; case NES_CM_STATE_ESTABLISHED: /* Passive OPEN */ @@ -1707,15 +1702,12 @@ static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, drop_packet(skb); break; case NES_CM_STATE_MPAREQ_SENT: - cleanup_retrans_entry(cm_node); cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq); if (datasize) { cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize; handle_rcv_mpa(cm_node, skb); - } else { /* Could be just an ack pkt.. */ - cleanup_retrans_entry(cm_node); + } else /* Could be just an ack pkt.. */ dev_kfree_skb_any(skb); - } break; case NES_CM_STATE_LISTENING: case NES_CM_STATE_CLOSED: @@ -1723,11 +1715,10 @@ static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, send_reset(cm_node, skb); break; case NES_CM_STATE_LAST_ACK: + case NES_CM_STATE_CLOSING: cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_CLOSED; cm_node->cm_id->rem_ref(cm_node->cm_id); - case NES_CM_STATE_CLOSING: - cleanup_retrans_entry(cm_node); rem_ref_cm_node(cm_node->cm_core, cm_node); drop_packet(skb); break; @@ -1742,9 +1733,11 @@ static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb, case NES_CM_STATE_MPAREQ_RCVD: case NES_CM_STATE_UNKNOWN: default: + cleanup_retrans_entry(cm_node); drop_packet(skb); break; } + return ret; } @@ -1850,6 +1843,7 @@ static void process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb, enum nes_tcpip_pkt_type pkt_type = NES_PKT_TYPE_UNKNOWN; struct tcphdr *tcph = tcp_hdr(skb); u32 fin_set = 0; + int ret = 0; skb_pull(skb, ip_hdr(skb)->ihl << 2); nes_debug(NES_DBG_CM, "process_packet: cm_node=%p state =%d syn=%d " @@ -1875,17 +1869,17 @@ static void process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb, handle_synack_pkt(cm_node, skb, tcph); break; case NES_PKT_TYPE_ACK: - handle_ack_pkt(cm_node, skb, tcph); - if (fin_set) + ret = handle_ack_pkt(cm_node, skb, tcph); + if (fin_set && !ret) handle_fin_pkt(cm_node); break; case NES_PKT_TYPE_RST: handle_rst_pkt(cm_node, skb, tcph); break; default: - drop_packet(skb); - if (fin_set) + if ((fin_set) && (!check_seq(cm_node, tcph, skb))) handle_fin_pkt(cm_node); + drop_packet(skb); break; } } -- cgit v0.10.2 From 9256b2513074164b4555617c4a3b82d36abf03e5 Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Mon, 27 Apr 2009 13:45:19 -0700 Subject: RDMA/nes: Fix error path in nes_accept() If reg_phys_mem() fails, we need to free memory allocated for MPA frame with private data before returning the error. Also move nes_add_ref() after the reg_phys_mem() is successful. Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 2c90b38..11c7d66 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -2705,7 +2705,6 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) /* associate the node with the QP */ nesqp->cm_node = (void *)cm_node; cm_node->nesqp = nesqp; - nes_add_ref(&nesqp->ibqp); nes_debug(NES_DBG_CM, "QP%u, cm_node=%p, jiffies = %lu listener = %p\n", nesqp->hwqp.qp_id, cm_node, jiffies, cm_node->listener); @@ -2758,6 +2757,9 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) nes_debug(NES_DBG_CM, "Unable to register memory region" "for lSMM for cm_node = %p \n", cm_node); + pci_free_consistent(nesdev->pcidev, + nesqp->private_data_len+sizeof(struct ietf_mpa_frame), + nesqp->ietf_frame, nesqp->ietf_frame_pbase); return -ENOMEM; } @@ -2874,6 +2876,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) /* notify OF layer that accept event was successful */ cm_id->add_ref(cm_id); + nes_add_ref(&nesqp->ibqp); cm_event.event = IW_CM_EVENT_ESTABLISHED; cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED; -- cgit v0.10.2 From 26cc5e57bbe770916bc67af169477fdd3ea1be4c Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 27 Apr 2009 13:46:29 -0700 Subject: RDMA/nes: Update iw_nes version Update version number to 1.5.0.0 Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h index 17621de..bf1720f 100644 --- a/drivers/infiniband/hw/nes/nes.h +++ b/drivers/infiniband/hw/nes/nes.h @@ -56,10 +56,8 @@ #define QUEUE_DISCONNECTS -#define DRV_BUILD "1" - #define DRV_NAME "iw_nes" -#define DRV_VERSION "1.0 KO Build " DRV_BUILD +#define DRV_VERSION "1.5.0.0" #define PFX DRV_NAME ": " /* -- cgit v0.10.2 From b2ad5e1e709e404dd637097411f1853d37926a6a Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 28 Apr 2009 00:37:53 +0100 Subject: FRV: Remove unused header asm/init.h. It seems nothing has included the frv asm/init.h header for some time, and its actual contents are out of date with include/linux/init.h. So just delete it. Signed-off-by: Tim Abbott Signed-off-by: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/frv/include/asm/init.h b/arch/frv/include/asm/init.h deleted file mode 100644 index 8b15838..0000000 --- a/arch/frv/include/asm/init.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_INIT_H -#define _ASM_INIT_H - -#define __init __attribute__ ((__section__ (".text.init"))) -#define __initdata __attribute__ ((__section__ (".data.init"))) -/* For assembly routines */ -#define __INIT .section ".text.init",#alloc,#execinstr -#define __FINIT .previous -#define __INITDATA .section ".data.init",#alloc,#write - -#endif - -- cgit v0.10.2 From df1f6d200c1e20788184251c49f349b38d90889c Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 28 Apr 2009 00:37:58 +0100 Subject: FRV: Use __INIT macro instead of .text.init. FRV is placing some code in the .text.init section but does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott Signed-off-by: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/frv/kernel/head-mmu-fr451.S b/arch/frv/kernel/head-mmu-fr451.S index c8f210d..98f87d5 100644 --- a/arch/frv/kernel/head-mmu-fr451.S +++ b/arch/frv/kernel/head-mmu-fr451.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -31,7 +32,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/arch/frv/kernel/head-uc-fr401.S b/arch/frv/kernel/head-uc-fr401.S index ee282be..438643c 100644 --- a/arch/frv/kernel/head-uc-fr401.S +++ b/arch/frv/kernel/head-uc-fr401.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -30,7 +31,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/arch/frv/kernel/head-uc-fr451.S b/arch/frv/kernel/head-uc-fr451.S index b10d9c8..b2a76c4 100644 --- a/arch/frv/kernel/head-uc-fr451.S +++ b/arch/frv/kernel/head-uc-fr451.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -30,7 +31,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/arch/frv/kernel/head-uc-fr555.S b/arch/frv/kernel/head-uc-fr555.S index 39937c1..5497aaf 100644 --- a/arch/frv/kernel/head-uc-fr555.S +++ b/arch/frv/kernel/head-uc-fr555.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -29,7 +30,7 @@ #define __551_LCR 0xfeff1100 #define __551_LSBR 0xfeff1c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### -- cgit v0.10.2 From 991da17ec0b9f396154c8120ffd10e5d7d7aa361 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:22 -0400 Subject: arm: Use __INIT macro instead of .text.init. arm is placing some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott Acked-by: Russell King Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index f0cc599..087e239 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -10,6 +10,7 @@ * * This is the "shell" of the ARMv6 processor support. */ +#include #include #include #include @@ -132,7 +133,7 @@ cpu_v6_name: .asciz "ARMv6-compatible processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v6_setup diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index d1ebec4..c221e26 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -9,6 +9,7 @@ * * This is the "shell" of the ARMv7 processor support. */ +#include #include #include #include @@ -153,7 +154,7 @@ cpu_v7_name: .ascii "ARMv7 Processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v7_setup diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 20f84bb..73d7d89 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -10,6 +10,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include #include #include #include @@ -87,7 +88,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) mcr p15, 0, r2, c7, c5, 4 @ prefetch flush mov pc, lr - .section ".text.init", #alloc, #execinstr + __INIT .type v6wbi_tlb_fns, #object ENTRY(v6wbi_tlb_fns) diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 24ba510..b637e73 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -11,6 +11,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include #include #include #include @@ -80,7 +81,7 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov pc, lr ENDPROC(v7wbi_flush_kern_tlb_range) - .section ".text.init", #alloc, #execinstr + __INIT .type v7wbi_tlb_fns, #object ENTRY(v7wbi_tlb_fns) -- cgit v0.10.2 From edada399e81303e85a1090b3cf0f3c5b13ff5f53 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:23 -0400 Subject: powerpc: Use TEXT_TEXT macro in linker script. Rather than adding .ref.text to the powerpc linker script so that we can use __REF on the powerpc architecture, it seems simpler to switch to using the generic TEXT_TEXT macro. Signed-off-by: Tim Abbott Cc: Benjamin Herrenschmidt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index d7425ff..433ae11 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -54,7 +54,8 @@ SECTIONS ALIGN_FUNCTION(); HEAD_TEXT _text = .; - *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*) + TEXT_TEXT + *(.fixup __ftr_alt_*) SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v0.10.2 From 9203fc9c1266ed21c327f679ad05e53509dfbee1 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:24 -0400 Subject: powerpc: Use __REF macro instead of old .text.init.refok. The section .text.init.refok is deprecated and __REF (.ref.text) should be used in assembly files instead. This patch cleans up a few uses of .text.init.refok in the powerpc architecture. Signed-off-by: Tim Abbott Cc: Benjamin Herrenschmidt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index f59a666..384d90c 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -4,6 +4,7 @@ #ifndef _ASM_POWERPC_PPC_ASM_H #define _ASM_POWERPC_PPC_ASM_H +#include #include #include #include @@ -189,7 +190,7 @@ name: \ GLUE(.,name): #define _INIT_GLOBAL(name) \ - .section ".text.init.refok"; \ + __REF; \ .align 2 ; \ .globl name; \ .globl GLUE(.,name); \ @@ -229,7 +230,7 @@ name: \ GLUE(.,name): #define _INIT_STATIC(name) \ - .section ".text.init.refok"; \ + __REF; \ .align 2 ; \ .section ".opd","aw"; \ name: \ -- cgit v0.10.2 From 882016ff3659126f6da50cf7cb84a0a15d00a87b Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:25 -0400 Subject: sh: Use __INIT macro instead of .text.init. The sh architecture has some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott Acked-by: Sam Ravnborg Acked-by: Paul Mundt Signed-off-by: Linus Torvalds diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index e640c63..7e49cb8 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -10,6 +10,7 @@ * for more details. */ #include +#include #include #include #include @@ -2058,10 +2059,10 @@ asm_uaccess_end: /* - * --- .text.init Section + * --- .init.text Section */ - .section .text.init, "ax" + __INIT /* * void trap_init (void) -- cgit v0.10.2 From a0871e8cb8c3f5ee2ecc560ae73a35cd420440f9 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:26 -0400 Subject: sparc: cleanup references to deprecated .text.init* sections. The section .text.init.refok is deprecated and __REF (.ref.text) should be used in assembly files instead. This patch cleans up a few uses of .text.init.refok in the sparc architecture. Also fix a reference to .text.init in a comment that wasn't updated to .init.text. Signed-off-by: Tim Abbott Cc: David S. Miller Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S index e91f01a..6b4d8ac 100644 --- a/arch/sparc/kernel/head_32.S +++ b/arch/sparc/kernel/head_32.S @@ -735,7 +735,7 @@ go_to_highmem: nop /* The code above should be at beginning and we have to take care about - * short jumps, as branching to .text.init section from .text is usually + * short jumps, as branching to .init.text section from .text is usually * impossible */ __INIT /* Acquire boot time privileged register values, this will help debugging. diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index 3a1b7bf..91bf4c7 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -467,7 +467,7 @@ jump_to_sun4u_init: jmpl %g2 + %g0, %g0 nop - .section .text.init.refok + __REF sun4u_init: BRANCH_IF_SUN4V(g1, sun4v_init) -- cgit v0.10.2 From 27b1833279995e7c290a40cac4ef36ccea7e9283 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:27 -0400 Subject: Remove unused support code for refok sections. The old refok sections .text.init.refok .data.init.refok .exit.text.refok have been deprecated since commit 312b1485fb509c9bc32eda28ad29537896658cb8. After the other patches in this patch series nothing is put in these sections, so clean things up by eliminating all the remaining references to them. Signed-off-by: Tim Abbott Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index eaa06ef..89853bc 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -90,7 +90,6 @@ /* .data section */ #define DATA_DATA \ *(.data) \ - *(.data.init.refok) \ *(.ref.data) \ DEV_KEEP(init.data) \ DEV_KEEP(exit.data) \ @@ -289,8 +288,6 @@ *(.text.hot) \ *(.text) \ *(.ref.text) \ - *(.text.init.refok) \ - *(.exit.text.refok) \ DEV_KEEP(init.text) \ DEV_KEEP(exit.text) \ CPU_KEEP(init.text) \ diff --git a/include/linux/init.h b/include/linux/init.h index 20a1334..0e06c17 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -62,14 +62,6 @@ #define __refdata __section(.ref.data) #define __refconst __section(.ref.rodata) -/* backward compatibility note - * A few places hardcode the old section names: - * .text.init.refok - * .data.init.refok - * .exit.text.refok - * They should be converted to use the defines from this file - */ - /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index df6e628..8d46ea7 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -794,15 +794,6 @@ static const char *init_exit_sections[] = /* data section */ static const char *data_sections[] = { DATA_SECTIONS, NULL }; -/* sections that may refer to an init/exit section with no warning */ -static const char *initref_sections[] = -{ - ".text.init.refok*", - ".exit.text.refok*", - ".data.init.refok*", - NULL -}; - /* symbols in .data that may refer to init/exit sections */ static const char *symbol_white_list[] = @@ -915,11 +906,6 @@ static int section_mismatch(const char *fromsec, const char *tosec) /** * Whitelist to allow certain references to pass with no warning. * - * Pattern 0: - * Do not warn if funtion/data are marked with __init_refok/__initdata_refok. - * The pattern is identified by: - * fromsec = .text.init.refok* | .data.init.refok* - * * Pattern 1: * If a module parameter is declared __initdata and permissions=0 * then this is legal despite the warning generated. @@ -958,10 +944,6 @@ static int section_mismatch(const char *fromsec, const char *tosec) static int secref_whitelist(const char *fromsec, const char *fromsym, const char *tosec, const char *tosym) { - /* Check for pattern 0 */ - if (match(fromsec, initref_sections)) - return 0; - /* Check for pattern 1 */ if (match(tosec, init_data_sections) && match(fromsec, data_sections) && -- cgit v0.10.2 From 2e8aead1b57ede7979bd4e24797c77e181775d9c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 17 Apr 2009 08:03:01 +0000 Subject: powerpc: ppc32 needs elf_read_implies_exec() On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries because old toolchains had bugs where they didn't mark program segments executable that needed to be. For some reason we didn't do this on ppc32 builds. This hadn't been an issue until commit 8d30c14c ("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side effect that we are now enforcing execute permissions to some extent on 32-bit 4xx and Book E processors. This fixes it by defining elf_read_implies_exec on 32-bit to turn on the read-implies-exec behaviour on programs that are sufficiently old that they don't have a PT_GNU_STACK program header. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 087c22f..d6b4a12 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -260,6 +260,7 @@ do { \ #else # define SET_PERSONALITY(ex) \ set_personality(PER_LINUX | (current->personality & (~PER_MASK))) +# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X) #endif /* __powerpc64__ */ extern int dcache_bsize; -- cgit v0.10.2 From ff61e5ccc35b7159a50741fc4b992817785acd5c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 22 Apr 2009 22:43:03 +0000 Subject: powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not select PCI. This can lead to a config with the former and the latter disabled, which does not build. To fix this PPC_CELL_NATIVE should select PCI. However, that would force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So instead move the select of PPC_OF_PLATFORM_PCI and PCI under both IBM_CELL_BLADE and CELLEB. Signed-off-by: Michael Ellerman Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 40e24c3..50f17bd 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -13,7 +13,6 @@ config PPC_CELL_COMMON config PPC_CELL_NATIVE bool select PPC_CELL_COMMON - select PPC_OF_PLATFORM_PCI select MPIC select IBM_NEW_EMAC_EMAC4 select IBM_NEW_EMAC_RGMII @@ -25,6 +24,8 @@ config PPC_IBM_CELL_BLADE bool "IBM Cell Blade" depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE + select PPC_OF_PLATFORM_PCI + select PCI select MMIO_NVRAM select PPC_UDBG_16550 select UDBG_RTAS_CONSOLE @@ -33,6 +34,8 @@ config PPC_CELLEB bool "Toshiba's Cell Reference Set 'Celleb' Architecture" depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE + select PPC_OF_PLATFORM_PCI + select PCI select HAS_TXX9_SERIAL select PPC_UDBG_BEAT select USB_OHCI_BIG_ENDIAN_MMIO -- cgit v0.10.2 From d8f48457d5af6601abdecaad7a95c45bfeef90d5 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 16 Apr 2009 09:05:37 +0000 Subject: powerpc/ps3: Fix build error on UP A non-SMP version of smp_send_stop() is now included in smp.h. Remove the unneeded definition in the PS3 smp.c. Fixes build errors like these when CONFIG_SMP=n: arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop' include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here Reported-by: Subrata Modak Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index 6618182..1a7b5ae 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -45,10 +45,6 @@ DEFINE_MUTEX(ps3_gpu_mutex); EXPORT_SYMBOL_GPL(ps3_gpu_mutex); -#if !defined(CONFIG_SMP) -static void smp_send_stop(void) {} -#endif - static union ps3_firmware_version ps3_firmware_version; void ps3_get_firmware_version(union ps3_firmware_version *v) -- cgit v0.10.2 From 3f68165e234233255a789c827c5d3d6fa965ddce Mon Sep 17 00:00:00 2001 From: Giuliano Pochini Date: Mon, 27 Apr 2009 23:23:29 +0200 Subject: ALSA: indigo-express: add missing 64KHz flags Indigo-express cards also support 64KHz sampling rate: this patch adds missing SNDRV_PCM_RATE_64000 flags. Signed-off-by: Giuliano Pochini Signed-off-by: Takashi Iwai diff --git a/sound/pci/echoaudio/indigodjx.c b/sound/pci/echoaudio/indigodjx.c index 3482ef6..2e44316 100644 --- a/sound/pci/echoaudio/indigodjx.c +++ b/sound/pci/echoaudio/indigodjx.c @@ -88,6 +88,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = { .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_64000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000, .rate_min = 32000, diff --git a/sound/pci/echoaudio/indigoiox.c b/sound/pci/echoaudio/indigoiox.c index aebee27..eb3819f 100644 --- a/sound/pci/echoaudio/indigoiox.c +++ b/sound/pci/echoaudio/indigoiox.c @@ -89,6 +89,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = { .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_64000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000, .rate_min = 32000, -- cgit v0.10.2 From bf368e4e70cd4e0f880923c44e95a4273d725ab4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Apr 2009 02:24:21 -0700 Subject: net: Avoid extra wakeups of threads blocked in wait_for_packet() In 2.6.25 we added UDP mem accounting. This unfortunatly added a penalty when a frame is transmitted, since we have at TX completion time to call sock_wfree() to perform necessary memory accounting. This calls sock_def_write_space() and utimately scheduler if any thread is waiting on the socket. Thread(s) waiting for an incoming frame was scheduled, then had to sleep again as event was meaningless. (All threads waiting on a socket are using same sk_sleep anchor) This adds lot of extra wakeups and increases latencies, as noted by Christoph Lameter, and slows down softirq handler. Reference : http://marc.info/?l=linux-netdev&m=124060437012283&w=2 Fortunatly, Davide Libenzi recently added concept of keyed wakeups into kernel, and particularly for sockets (see commit 37e5540b3c9d838eb20f2ca8ea2eb8072271e403 epoll keyed wakeups: make sockets use keyed wakeups) Davide goal was to optimize epoll, but this new wakeup infrastructure can help non epoll users as well, if they care to setup an appropriate handler. This patch introduces new DEFINE_WAIT_FUNC() helper and uses it in wait_for_packet(), so that only relevant event can wakeup a thread blocked in this function. Trace of function calls from bnx2 TX completion bnx2_poll_work() is : __kfree_skb() skb_release_head_state() sock_wfree() sock_def_write_space() __wake_up_sync_key() __wake_up_common() receiver_wake_function() : Stops here since thread is waiting for an INPUT Reported-by: Christoph Lameter Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/wait.h b/include/linux/wait.h index 5d631c1..bc02463 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -440,13 +440,15 @@ void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait, int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key); int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key); -#define DEFINE_WAIT(name) \ +#define DEFINE_WAIT_FUNC(name, function) \ wait_queue_t name = { \ .private = current, \ - .func = autoremove_wake_function, \ + .func = function, \ .task_list = LIST_HEAD_INIT((name).task_list), \ } +#define DEFINE_WAIT(name) DEFINE_WAIT_FUNC(name, autoremove_wake_function) + #define DEFINE_WAIT_BIT(name, word, bit) \ struct wait_bit_queue name = { \ .key = __WAIT_BIT_KEY_INITIALIZER(word, bit), \ diff --git a/net/core/datagram.c b/net/core/datagram.c index d0de644..b01a76a 100644 --- a/net/core/datagram.c +++ b/net/core/datagram.c @@ -64,13 +64,25 @@ static inline int connection_based(struct sock *sk) return sk->sk_type == SOCK_SEQPACKET || sk->sk_type == SOCK_STREAM; } +static int receiver_wake_function(wait_queue_t *wait, unsigned mode, int sync, + void *key) +{ + unsigned long bits = (unsigned long)key; + + /* + * Avoid a wakeup if event not interesting for us + */ + if (bits && !(bits & (POLLIN | POLLERR))) + return 0; + return autoremove_wake_function(wait, mode, sync, key); +} /* * Wait for a packet.. */ static int wait_for_packet(struct sock *sk, int *err, long *timeo_p) { int error; - DEFINE_WAIT(wait); + DEFINE_WAIT_FUNC(wait, receiver_wake_function); prepare_to_wait_exclusive(sk->sk_sleep, &wait, TASK_INTERRUPTIBLE); -- cgit v0.10.2 From 2008f137e92220b98120c4803499cdddb2b0fb06 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 28 Apr 2009 12:25:59 +0200 Subject: ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some drivers Added SNDRV_PCM_INFO_BATCH flag to PCM info field of some drivers that really don't give the precise pointer value. Signed-off-by: Takashi Iwai diff --git a/sound/isa/msnd/msnd.c b/sound/isa/msnd/msnd.c index 9064544..3a1526a 100644 --- a/sound/isa/msnd/msnd.c +++ b/sound/isa/msnd/msnd.c @@ -438,7 +438,8 @@ static void snd_msnd_capture_reset_queue(struct snd_msnd *chip, static struct snd_pcm_hardware snd_msnd_playback = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_8000_48000, .rate_min = 8000, @@ -456,7 +457,8 @@ static struct snd_pcm_hardware snd_msnd_playback = { static struct snd_pcm_hardware snd_msnd_capture = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_8000_48000, .rate_min = 8000, diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index a299340..ce3f2e9 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -349,7 +349,8 @@ static struct snd_pcm_hardware snd_bt87x_digital_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = 0, /* set at runtime */ .channels_min = 2, @@ -365,7 +366,8 @@ static struct snd_pcm_hardware snd_bt87x_analog_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8, .rates = SNDRV_PCM_RATE_KNOT, .rate_min = ANALOG_CLOCK / CLOCK_DIV_MAX, diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c index 8b79969..7cc38a1 100644 --- a/sound/pci/korg1212/korg1212.c +++ b/sound/pci/korg1212/korg1212.c @@ -1238,7 +1238,8 @@ static struct snd_pcm_hardware snd_korg1212_playback_info = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED), + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000), @@ -1258,7 +1259,8 @@ static struct snd_pcm_hardware snd_korg1212_capture_info = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED), + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000), diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c index 01066c9..d057e64 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c @@ -240,7 +240,8 @@ static int pdacf_pcm_prepare(struct snd_pcm_substream *subs) static struct snd_pcm_hardware pdacf_pcm_capture_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME | - SNDRV_PCM_INFO_MMAP_VALID), + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE, diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c index 30490a2..594c6c5 100644 --- a/sound/soc/au1x/dbdma2.c +++ b/sound/soc/au1x/dbdma2.c @@ -82,7 +82,7 @@ static struct au1xpsc_audio_dmadata *au1xpsc_audio_pcmdma[2]; /* PCM hardware DMA capabilities - platform specific */ static const struct snd_pcm_hardware au1xpsc_pcm_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED, + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH, .formats = AU1XPSC_PCM_FMTS, .period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES, .period_bytes_max = 4096 * 1024 - 1, diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c index 3aa729d..1111c71 100644 --- a/sound/soc/fsl/mpc5200_psc_i2s.c +++ b/sound/soc/fsl/mpc5200_psc_i2s.c @@ -504,7 +504,8 @@ static struct snd_soc_dai psc_i2s_dai_template = { static const struct snd_pcm_hardware psc_i2s_pcm_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER, + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE, .rate_min = 8000, diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c index 0dad3a0..baddb12 100644 --- a/sound/soc/sh/dma-sh7760.c +++ b/sound/soc/sh/dma-sh7760.c @@ -103,7 +103,8 @@ static struct snd_pcm_hardware camelot_pcm_hardware = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID), + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), .formats = DMABRG_FMTS, .rates = DMABRG_RATES, .rate_min = 8000, diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index af95ff1..1d2e51b 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -1975,7 +1975,8 @@ static struct snd_pcm_hardware snd_dbri_pcm_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_MU_LAW | SNDRV_PCM_FMTBIT_A_LAW | SNDRV_PCM_FMTBIT_U8 | diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c index 9a608fa..dd1ab61 100644 --- a/sound/usb/usx2y/usbusx2yaudio.c +++ b/sound/usb/usx2y/usbusx2yaudio.c @@ -870,7 +870,8 @@ static struct snd_pcm_hardware snd_usX2Y_2c = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID), + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE, .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000, .rate_min = 44100, -- cgit v0.10.2 From 3e5b50165fd0be080044586f43fcdd460ed27610 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 28 Apr 2009 12:07:08 +0200 Subject: ALSA: pcm core - Avoid jiffies check for devices with BATCH flag The hardware devices with SNDRV_PCM_INFO_BATCH flag can't give the precise current position. And such hardwares have often big FIFO in addition to the ring buffer, and it screws up the jiffies check in pcm_lib.c. This patch adds a simple check of info flag so that the driver skips the jiffies check in snd_pcm_period_elapsed() when BATCH flag is set. Signed-off-by: Takashi Iwai diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 63d088f..a2a792c 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -249,6 +249,12 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; } } + /* Skip the jiffies check for hardwares with BATCH flag. + * Such hardware usually just increases the position at each IRQ, + * thus it can't give any strange position. + */ + if (runtime->hw.info & SNDRV_PCM_INFO_BATCH) + goto no_jiffies_check; hdelta = new_hw_ptr - old_hw_ptr; jdelta = jiffies - runtime->hw_ptr_jiffies; if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) { @@ -272,6 +278,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) hw_base -= hw_base % runtime->buffer_size; delta = 0; } + no_jiffies_check: if (delta > runtime->period_size + runtime->period_size / 2) { hw_ptr_error(substream, "Lost interrupts? " -- cgit v0.10.2 From 18cc8d8d9b74c446832336d8f6e1afb145f9431b Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Tue, 28 Apr 2009 18:18:05 +0900 Subject: ASoC: TWL4030: Fix gain control for earpiece amplifier The gain control for earpiece amplifier uses 0dB ~ 12dB according to the TRM, but the present code is implemented to -6dB ~ 6dB. Signed-off-by: Joonyoung Shim Acked-by: Peter Ujfalusi Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 921b205..df7c8c2 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -836,6 +836,12 @@ static DECLARE_TLV_DB_SCALE(analog_tlv, -2400, 200, 0); static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1); /* + * Gain control for earpiece amplifier + * 0 dB to 12 dB in 6 dB steps (mute instead of -6) + */ +static DECLARE_TLV_DB_SCALE(output_ear_tvl, -600, 600, 1); + +/* * Capture gain after the ADCs * from 0 dB to 31 dB in 1 dB steps */ @@ -900,7 +906,7 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = { 4, 3, 0, output_tvl), SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume", - TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl), + TWL4030_REG_EAR_CTL, 4, 3, 0, output_ear_tvl), /* Common capture gain controls */ SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume", -- cgit v0.10.2 From f3784d834c71689336fa272df420b45345cb6b84 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 23 Apr 2009 14:50:54 +0300 Subject: Bluetooth: Ensure that HCI sysfs add/del is preempt safe Use a different work_struct variables for add_conn() and del_conn() and use single work queue instead of two for adding and deleting connections. It eliminates the following error on a preemptible kernel: [ 204.358032] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 204.370697] pgd = c0004000 [ 204.373443] [0000000c] *pgd=00000000 [ 204.378601] Internal error: Oops: 17 [#1] PREEMPT [ 204.383361] Modules linked in: vfat fat rfcomm sco l2cap sd_mod scsi_mod iphb pvr2d drm omaplfb ps [ 204.438537] CPU: 0 Not tainted (2.6.28-maemo2 #1) [ 204.443664] PC is at klist_put+0x2c/0xb4 [ 204.447601] LR is at klist_put+0x18/0xb4 [ 204.451568] pc : [] lr : [] psr: a0000113 [ 204.451568] sp : cf1b3f10 ip : cf1b3f10 fp : cf1b3f2c [ 204.463104] r10: 00000000 r9 : 00000000 r8 : bf08029c [ 204.468353] r7 : c7869200 r6 : cfbe2690 r5 : c78692c8 r4 : 00000001 [ 204.474945] r3 : 00000001 r2 : cf1b2000 r1 : 00000001 r0 : 00000000 [ 204.481506] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 204.488861] Control: 10c5387d Table: 887fc018 DAC: 00000017 [ 204.494628] Process btdelconn (pid: 515, stack limit = 0xcf1b22e0) Signed-off-by: Roger Quadros Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 01f9316..1224bba 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -180,7 +180,8 @@ struct hci_conn { struct timer_list disc_timer; struct timer_list idle_timer; - struct work_struct work; + struct work_struct work_add; + struct work_struct work_del; struct device dev; diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index ed82796..b7c5108 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -9,8 +9,7 @@ struct class *bt_class = NULL; EXPORT_SYMBOL_GPL(bt_class); -static struct workqueue_struct *btaddconn; -static struct workqueue_struct *btdelconn; +static struct workqueue_struct *bluetooth; static inline char *link_typetostr(int type) { @@ -88,9 +87,10 @@ static struct device_type bt_link = { static void add_conn(struct work_struct *work) { - struct hci_conn *conn = container_of(work, struct hci_conn, work); + struct hci_conn *conn = container_of(work, struct hci_conn, work_add); - flush_workqueue(btdelconn); + /* ensure previous add/del is complete */ + flush_workqueue(bluetooth); if (device_add(&conn->dev) < 0) { BT_ERR("Failed to register connection device"); @@ -114,9 +114,9 @@ void hci_conn_add_sysfs(struct hci_conn *conn) device_initialize(&conn->dev); - INIT_WORK(&conn->work, add_conn); + INIT_WORK(&conn->work_add, add_conn); - queue_work(btaddconn, &conn->work); + queue_work(bluetooth, &conn->work_add); } /* @@ -131,9 +131,12 @@ static int __match_tty(struct device *dev, void *data) static void del_conn(struct work_struct *work) { - struct hci_conn *conn = container_of(work, struct hci_conn, work); + struct hci_conn *conn = container_of(work, struct hci_conn, work_del); struct hci_dev *hdev = conn->hdev; + /* ensure previous add/del is complete */ + flush_workqueue(bluetooth); + while (1) { struct device *dev; @@ -156,9 +159,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn) if (!device_is_registered(&conn->dev)) return; - INIT_WORK(&conn->work, del_conn); + INIT_WORK(&conn->work_del, del_conn); - queue_work(btdelconn, &conn->work); + queue_work(bluetooth, &conn->work_del); } static inline char *host_typetostr(int type) @@ -435,20 +438,13 @@ void hci_unregister_sysfs(struct hci_dev *hdev) int __init bt_sysfs_init(void) { - btaddconn = create_singlethread_workqueue("btaddconn"); - if (!btaddconn) - return -ENOMEM; - - btdelconn = create_singlethread_workqueue("btdelconn"); - if (!btdelconn) { - destroy_workqueue(btaddconn); + bluetooth = create_singlethread_workqueue("bluetooth"); + if (!bluetooth) return -ENOMEM; - } bt_class = class_create(THIS_MODULE, "bluetooth"); if (IS_ERR(bt_class)) { - destroy_workqueue(btdelconn); - destroy_workqueue(btaddconn); + destroy_workqueue(bluetooth); return PTR_ERR(bt_class); } @@ -457,8 +453,7 @@ int __init bt_sysfs_init(void) void bt_sysfs_cleanup(void) { - destroy_workqueue(btaddconn); - destroy_workqueue(btdelconn); + destroy_workqueue(bluetooth); class_destroy(bt_class); } -- cgit v0.10.2 From 052b30b0a8eec8db5b18ad49effdf2a9ba4c1e1a Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 26 Apr 2009 20:01:22 +0200 Subject: Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index f69f015..ed3aea1 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -101,6 +101,7 @@ enum { /* HCI timeouts */ #define HCI_CONNECT_TIMEOUT (40000) /* 40 seconds */ #define HCI_DISCONN_TIMEOUT (2000) /* 2 seconds */ +#define HCI_PAIRING_TIMEOUT (60000) /* 60 seconds */ #define HCI_IDLE_TIMEOUT (6000) /* 6 seconds */ #define HCI_INIT_TIMEOUT (10000) /* 10 seconds */ diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 1224bba..be5bd71 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -171,6 +171,7 @@ struct hci_conn { __u8 auth_type; __u8 sec_level; __u8 power_save; + __u16 disc_timeout; unsigned long pend; unsigned int sent; @@ -349,9 +350,9 @@ static inline void hci_conn_put(struct hci_conn *conn) if (conn->type == ACL_LINK) { del_timer(&conn->idle_timer); if (conn->state == BT_CONNECTED) { - timeo = msecs_to_jiffies(HCI_DISCONN_TIMEOUT); + timeo = msecs_to_jiffies(conn->disc_timeout); if (!conn->out) - timeo *= 5; + timeo *= 2; } else timeo = msecs_to_jiffies(10); } else diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 1181db0..75ebbe2 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -215,6 +215,7 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst) conn->state = BT_OPEN; conn->power_save = 1; + conn->disc_timeout = HCI_DISCONN_TIMEOUT; switch (type) { case ACL_LINK: diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 15f40ea..4e7cb88 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -883,6 +883,7 @@ static inline void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *s if (conn->type == ACL_LINK) { conn->state = BT_CONFIG; hci_conn_hold(conn); + conn->disc_timeout = HCI_DISCONN_TIMEOUT; } else conn->state = BT_CONNECTED; @@ -1063,9 +1064,14 @@ static inline void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *s hci_proto_connect_cfm(conn, ev->status); hci_conn_put(conn); } - } else + } else { hci_auth_cfm(conn, ev->status); + hci_conn_hold(conn); + conn->disc_timeout = HCI_DISCONN_TIMEOUT; + hci_conn_put(conn); + } + if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) { if (!ev->status) { struct hci_cp_set_conn_encrypt cp; @@ -1479,7 +1485,21 @@ static inline void hci_mode_change_evt(struct hci_dev *hdev, struct sk_buff *skb static inline void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff *skb) { + struct hci_ev_pin_code_req *ev = (void *) skb->data; + struct hci_conn *conn; + BT_DBG("%s", hdev->name); + + hci_dev_lock(hdev); + + conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); + if (conn) { + hci_conn_hold(conn); + conn->disc_timeout = HCI_PAIRING_TIMEOUT; + hci_conn_put(conn); + } + + hci_dev_unlock(hdev); } static inline void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb) @@ -1489,7 +1509,21 @@ static inline void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff static inline void hci_link_key_notify_evt(struct hci_dev *hdev, struct sk_buff *skb) { + struct hci_ev_link_key_notify *ev = (void *) skb->data; + struct hci_conn *conn; + BT_DBG("%s", hdev->name); + + hci_dev_lock(hdev); + + conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); + if (conn) { + hci_conn_hold(conn); + conn->disc_timeout = HCI_DISCONN_TIMEOUT; + hci_conn_put(conn); + } + + hci_dev_unlock(hdev); } static inline void hci_clock_offset_evt(struct hci_dev *hdev, struct sk_buff *skb) -- cgit v0.10.2 From 3fdca1e1370ffe89980927cdef0583bebcd8caaf Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 28 Apr 2009 09:04:55 -0700 Subject: Bluetooth: Fix connection establishment with low security requirement The Bluetooth 2.1 specification introduced four different security modes that can be mapped using Legacy Pairing and Simple Pairing. With the usage of Simple Pairing it is required that all connections (except the ones for SDP) are encrypted. So even the low security requirement mandates an encrypted connection when using Simple Pairing. When using Legacy Pairing (for Bluetooth 2.0 devices and older) this is not required since it causes interoperability issues. To support this properly the low security requirement translates into different host controller transactions depending if Simple Pairing is supported or not. However in case of Simple Pairing the command to switch on encryption after a successful authentication is not triggered for the low security mode. This patch fixes this and actually makes the logic to differentiate between Simple Pairing and Legacy Pairing a lot simpler. Based on a report by Ville Tervo Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 75ebbe2..375f4b4 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -425,12 +425,9 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) if (sec_level == BT_SECURITY_SDP) return 1; - if (sec_level == BT_SECURITY_LOW) { - if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0) - return hci_conn_auth(conn, sec_level, auth_type); - else - return 1; - } + if (sec_level == BT_SECURITY_LOW && + (!conn->ssp_mode || !conn->hdev->ssp_mode)) + return 1; if (conn->link_mode & HCI_LM_ENCRYPT) return hci_conn_auth(conn, sec_level, auth_type); -- cgit v0.10.2 From 384318ecd2eb4fdbcbe7c4df6e8bb55986bf52d4 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Tue, 28 Apr 2009 07:49:54 -0700 Subject: Input: wacom - fix TabletPC touch bug This patch fixed a bug that was introduced in kernel 2.6.28 for TabletPC touch data. The wacom_parse_hid routine in wacom_sys.c should always return 0 even when usb_control_msg got an error. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index 677680e..9710bfd 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -11,7 +11,7 @@ * Copyright (c) 2000 Daniel Egger * Copyright (c) 2001 Frederic Lepied * Copyright (c) 2004 Panagiotis Issaris - * Copyright (c) 2002-2008 Ping Cheng + * Copyright (c) 2002-2009 Ping Cheng * * ChangeLog: * v0.1 (vp) - Initial release @@ -67,6 +67,7 @@ * v1.47 (pc) - Added support for Bamboo * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) + * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28 */ /* @@ -87,7 +88,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.49" +#define DRIVER_VERSION "v1.50" #define DRIVER_AUTHOR "Vojtech Pavlik " #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 484496d..b8624f2 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -289,6 +289,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi 5000); /* 5 secs */ } while (result < 0 && limit++ < 5); + /* No need to parse the Descriptor. It isn't an error though */ if (result < 0) goto out; @@ -368,9 +369,8 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi } } - result = 0; - out: + result = 0; kfree(report); return result; } @@ -425,6 +425,15 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i endpoint = &intf->cur_altsetting->endpoint[0].desc; + /* Initialize touch_x_max and touch_y_max in case it is not defined */ + if (wacom_wac->features->type == TABLETPC) { + features->touch_x_max = 1023; + features->touch_y_max = 1023; + } else { + features->touch_x_max = 0; + features->touch_y_max = 0; + } + /* TabletPC need to retrieve the physical and logical maximum from report descriptor */ if (wacom_wac->features->type == TABLETPC) { if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { -- cgit v0.10.2 From 0385c5ee3ca96bfe244610bf459abf66682ff202 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Tue, 28 Apr 2009 07:49:53 -0700 Subject: Input: appletouch - fix DMA to/from stack buffer CONFIG_DMA_API_DEBUG spotted an instance of appletouch using an array on the stack as a DMA buffer for certain hardware. Change it to use a kmalloc()ed buffer instead. Signed-off-by: Bob Copeland Reviewed-by: Johannes Berg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 454b961..e0140fd 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -255,15 +255,22 @@ MODULE_PARM_DESC(debug, "Activate debugging output"); */ static int atp_geyser_init(struct usb_device *udev) { - char data[8]; + char *data; int size; int i; + int ret; + + data = kmalloc(8, GFP_KERNEL); + if (!data) { + err("Out of memory"); + return -ENOMEM; + } size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), ATP_GEYSER_MODE_READ_REQUEST_ID, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: read error\n"); @@ -271,7 +278,8 @@ static int atp_geyser_init(struct usb_device *udev) dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to read mode from device."); - return -EIO; + ret = -EIO; + goto out_free; } /* Apply the mode switch */ @@ -281,7 +289,7 @@ static int atp_geyser_init(struct usb_device *udev) ATP_GEYSER_MODE_WRITE_REQUEST_ID, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: write error\n"); @@ -289,9 +297,13 @@ static int atp_geyser_init(struct usb_device *udev) dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to request geyser raw mode"); - return -EIO; + ret = -EIO; + goto out_free; } - return 0; + ret = 0; +out_free: + kfree(data); + return ret; } /* -- cgit v0.10.2 From 9894cf0ff5e9ccda60d8d0e2d37bd61539b08826 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Mon, 27 Apr 2009 11:52:42 -0700 Subject: Input: bcm5974 - prepare for a new trackpad header type The new unibody Macbooks are equipped with an integrated button and trackpad. The package header of the trackpad interface has changed to also contain information about the integrated button. This patch performs the necessary preparations to allow for the new package header. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 2998a6a..bda8733 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -96,14 +96,15 @@ struct bt_data { u8 rel_y; /* relative y coordinate */ }; -/* trackpad header structure */ -struct tp_header { - u8 unknown1[16]; /* constants, timers, etc */ - u8 fingers; /* number of fingers on trackpad */ - u8 unknown2[9]; /* constants, timers, etc */ +/* trackpad header types */ +enum tp_type { + TYPE1 /* plain trackpad */ }; -/* trackpad finger structure */ +/* trackpad finger data offsets, le16-aligned */ +#define FINGER_TYPE1 (13 * sizeof(__le16)) + +/* trackpad finger structure, le16-aligned */ struct tp_finger { __le16 origin; /* zero when switching track finger */ __le16 abs_x; /* absolute x coodinate */ @@ -117,13 +118,11 @@ struct tp_finger { __le16 force_minor; /* trackpad force, minor axis? */ __le16 unused[3]; /* zeros */ __le16 multi; /* one finger: varies, more fingers: constant */ -}; +} __attribute__((packed,aligned(2))); -/* trackpad data structure, empirically at least ten fingers */ -struct tp_data { - struct tp_header header; - struct tp_finger finger[16]; -}; +/* trackpad finger data size, empirically at least ten fingers */ +#define SIZEOF_FINGER sizeof(struct tp_finger) +#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER) /* device-specific parameters */ struct bcm5974_param { @@ -139,6 +138,8 @@ struct bcm5974_config { int bt_ep; /* the endpoint of the button interface */ int bt_datalen; /* data length of the button interface */ int tp_ep; /* the endpoint of the trackpad interface */ + enum tp_type tp_type; /* type of trackpad interface */ + int tp_offset; /* offset to trackpad finger data */ int tp_datalen; /* data length of the trackpad interface */ struct bcm5974_param p; /* finger pressure limits */ struct bcm5974_param w; /* finger width limits */ @@ -158,7 +159,7 @@ struct bcm5974 { struct urb *bt_urb; /* button usb request block */ struct bt_data *bt_data; /* button transferred data */ struct urb *tp_urb; /* trackpad usb request block */ - struct tp_data *tp_data; /* trackpad transferred data */ + u8 *tp_data; /* trackpad transferred data */ int fingers; /* number of fingers on trackpad */ }; @@ -184,7 +185,7 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING_ISO, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 5342 }, @@ -195,7 +196,7 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 4824 }, @@ -276,18 +277,21 @@ static int report_bt_state(struct bcm5974 *dev, int size) static int report_tp_state(struct bcm5974 *dev, int size) { const struct bcm5974_config *c = &dev->cfg; - const struct tp_finger *f = dev->tp_data->finger; + const struct tp_finger *f; struct input_dev *input = dev->input; - const int fingers = (size - 26) / 28; - int raw_p, raw_w, raw_x, raw_y; + int raw_p, raw_w, raw_x, raw_y, raw_n; int ptest = 0, origin = 0, nmin = 0, nmax = 0; int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; - if (size < 26 || (size - 26) % 28 != 0) + if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0) return -EIO; + /* finger data, le16-aligned */ + f = (const struct tp_finger *)(dev->tp_data + c->tp_offset); + raw_n = (size - c->tp_offset) / SIZEOF_FINGER; + /* always track the first finger; when detached, start over */ - if (fingers) { + if (raw_n) { raw_p = raw2int(f->force_major); raw_w = raw2int(f->size_major); raw_x = raw2int(f->abs_x); @@ -307,12 +311,13 @@ static int report_tp_state(struct bcm5974 *dev, int size) abs_w = int2bound(&c->w, raw_w); abs_x = int2bound(&c->x, raw_x - c->x.devmin); abs_y = int2bound(&c->y, c->y.devmax - raw_y); - for (; f != dev->tp_data->finger + fingers; f++) { + while (raw_n--) { ptest = int2bound(&c->p, raw2int(f->force_major)); if (ptest > PRESSURE_LOW) nmax++; if (ptest > PRESSURE_HIGH) nmin++; + f++; } } -- cgit v0.10.2 From 6916d97f6e25cc66a32d6e9a16419067d843b14f Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Mon, 27 Apr 2009 11:52:43 -0700 Subject: Input: bcm5974 - add quad-finger tapping The integrated button on the new unibody Macbooks presents a need to report explicit four-finger actions. Evidently, the finger pressing the button is also touching the trackpad, so in order to fully support three-finger actions, the driver must be able to report four-finger actions. This patch adds a new button, BTN_TOOL_QUADTAP, which achieves this. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index bda8733..2ddf05e 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -258,6 +258,7 @@ static void setup_events_to_report(struct input_dev *input_dev, __set_bit(BTN_TOOL_FINGER, input_dev->keybit); __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); } @@ -329,7 +330,8 @@ static int report_tp_state(struct bcm5974 *dev, int size) input_report_key(input, BTN_TOUCH, dev->fingers > 0); input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1); input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2); - input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3); + input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3); input_report_abs(input, ABS_PRESSURE, abs_p); input_report_abs(input, ABS_TOOL_WIDTH, abs_w); diff --git a/include/linux/input.h b/include/linux/input.h index 6b28048..32cb825 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -445,6 +445,7 @@ struct input_absinfo { #define BTN_STYLUS2 0x14c #define BTN_TOOL_DOUBLETAP 0x14d #define BTN_TOOL_TRIPLETAP 0x14e +#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ #define BTN_WHEEL 0x150 #define BTN_GEAR_DOWN 0x150 -- cgit v0.10.2 From 158e928741e58eb4aa379da422290c10fef23f00 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 28 Apr 2009 07:03:54 -0700 Subject: Input: bcm5974 - Add support for the Macbook 5 (Unibody) This patch adds support for the new unibody Macbook, with physically integrated button and trackpad. Since the integrated button changes the logic for touch-and-click, a device capability bit mask is now reported in input_id.version, which can be picked up by user space via a EVIOCGID call. Signed-off-by: Henrik Rydberg Tested-by: David M. Lary Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 2ddf05e..f2b3826 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -51,6 +51,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +/* Macbook5,1 (unibody), aka wellspring3 */ +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -72,6 +76,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), + /* Macbook5,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), /* Terminating entry */ {} }; @@ -98,11 +106,19 @@ struct bt_data { /* trackpad header types */ enum tp_type { - TYPE1 /* plain trackpad */ + TYPE1, /* plain trackpad */ + TYPE2 /* button integrated in trackpad */ }; /* trackpad finger data offsets, le16-aligned */ #define FINGER_TYPE1 (13 * sizeof(__le16)) +#define FINGER_TYPE2 (15 * sizeof(__le16)) + +/* trackpad button data offsets */ +#define BUTTON_TYPE2 15 + +/* list of device capability bits */ +#define HAS_INTEGRATED_BUTTON 1 /* trackpad finger structure, le16-aligned */ struct tp_finger { @@ -135,6 +151,7 @@ struct bcm5974_param { /* device-specific configuration */ struct bcm5974_config { int ansi, iso, jis; /* the product id of this device */ + int caps; /* device capability bitmask */ int bt_ep; /* the endpoint of the button interface */ int bt_datalen; /* data length of the button interface */ int tp_ep; /* the endpoint of the trackpad interface */ @@ -184,6 +201,7 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, + 0, 0x84, sizeof(struct bt_data), 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, @@ -195,6 +213,7 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, + 0, 0x84, sizeof(struct bt_data), 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, @@ -202,6 +221,18 @@ static const struct bcm5974_config bcm5974_config_table[] = { { DIM_X, DIM_X / SN_COORD, -4824, 4824 }, { DIM_Y, DIM_Y / SN_COORD, -172, 4290 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING3_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING3_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, + { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } + }, {} }; @@ -281,7 +312,7 @@ static int report_tp_state(struct bcm5974 *dev, int size) const struct tp_finger *f; struct input_dev *input = dev->input; int raw_p, raw_w, raw_x, raw_y, raw_n; - int ptest = 0, origin = 0, nmin = 0, nmax = 0; + int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0; int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0) @@ -304,6 +335,10 @@ static int report_tp_state(struct bcm5974 *dev, int size) ptest = int2bound(&c->p, raw_p); origin = raw2int(f->origin); + + /* set the integrated button if applicable */ + if (c->tp_type == TYPE2) + ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); } /* while tracking finger still valid, count all fingers */ @@ -347,6 +382,10 @@ static int report_tp_state(struct bcm5974 *dev, int size) } + /* type 2 reports button events via ibt only */ + if (c->tp_type == TYPE2) + input_report_key(input, BTN_LEFT, ibt); + input_sync(input); return 0; @@ -656,6 +695,8 @@ static int bcm5974_probe(struct usb_interface *iface, input_dev->name = "bcm5974"; input_dev->phys = dev->phys; usb_to_input_id(dev->udev, &input_dev->id); + /* report driver capabilities via the version field */ + input_dev->id.version = cfg->caps; input_dev->dev.parent = &iface->dev; input_set_drvdata(input_dev, dev); -- cgit v0.10.2 From 5340219317a3370a4b76a2b6f31b1e5a3dbc648b Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 28 Apr 2009 07:04:42 -0700 Subject: Input: bcm5974 - augment debug information Add more button and finger data to the debug output. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index f2b3826..2d8fc0b 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -299,6 +299,11 @@ static int report_bt_state(struct bcm5974 *dev, int size) if (size != sizeof(struct bt_data)) return -EIO; + dprintk(7, + "bcm5974: button data: %x %x %x %x\n", + dev->bt_data->unknown1, dev->bt_data->button, + dev->bt_data->rel_x, dev->bt_data->rel_y); + input_report_key(dev->input, BTN_LEFT, dev->bt_data->button); input_sync(dev->input); @@ -330,8 +335,9 @@ static int report_tp_state(struct bcm5974 *dev, int size) raw_y = raw2int(f->abs_y); dprintk(9, - "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n", - raw_p, raw_w, raw_x, raw_y); + "bcm5974: " + "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n", + raw_p, raw_w, raw_x, raw_y, raw_n); ptest = int2bound(&c->p, raw_p); origin = raw2int(f->origin); @@ -377,8 +383,8 @@ static int report_tp_state(struct bcm5974 *dev, int size) dprintk(8, "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d " - "nmin: %d nmax: %d n: %d\n", - abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers); + "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w, + abs_x, abs_y, nmin, nmax, dev->fingers, ibt); } -- cgit v0.10.2 From 4c57e379f4e318847dd06f60c7e1ff4d8bde1bdb Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 28 Apr 2009 07:07:07 -0700 Subject: Input: bcm5974 - add documentation for the driver This patch adds documentation for the bcm5974 to Documentation/input/. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/Documentation/input/bcm5974.txt b/Documentation/input/bcm5974.txt new file mode 100644 index 0000000..5e22dcf --- /dev/null +++ b/Documentation/input/bcm5974.txt @@ -0,0 +1,65 @@ +BCM5974 Driver (bcm5974) +------------------------ + Copyright (C) 2008-2009 Henrik Rydberg + +The USB initialization and package decoding was made by Scott Shawcroft as +part of the touchd user-space driver project: + Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com) + +The BCM5974 driver is based on the appletouch driver: + Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) + Copyright (C) 2005 Stelian Pop (stelian@popies.net) + Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) + Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) + Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) + +This driver adds support for the multi-touch trackpad on the new Apple +Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on +those computers, and integrates well with the synaptics driver of the Xorg +system. + +Known to work on Macbook Air, Macbook Pro Penryn and the new unibody +Macbook 5 and Macbook Pro 5. + +Usage +----- + +The driver loads automatically for the supported usb device ids, and +becomes available both as an event device (/dev/input/event*) and as a +mouse via the mousedev driver (/dev/input/mice). + +USB Race +-------- + +The Apple multi-touch trackpads report both mouse and keyboard events via +different interfaces of the same usb device. This creates a race condition +with the HID driver, which, if not told otherwise, will find the standard +HID mouse and keyboard, and claim the whole device. To remedy, the usb +product id must be listed in the mouse_ignore list of the hid driver. + +Debug output +------------ + +To ease the development for new hardware version, verbose packet output can +be switched on with the debug kernel module parameter. The range [1-9] +yields different levels of verbosity. Example (as root): + +echo -n 9 > /sys/module/bcm5974/parameters/debug + +tail -f /var/log/debug + +echo -n 0 > /sys/module/bcm5974/parameters/debug + +Trivia +------ + +The driver was developed at the ubuntu forums in June 2008 [1], and now has +a more permanent home at bitmath.org [2]. + +Links +----- + +[1] http://ubuntuforums.org/showthread.php?t=840040 +[2] http://http://bitmath.org/code/ -- cgit v0.10.2 From 61994a61bcedf328cb1d6e96c393fc91ce64563d Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 28 Apr 2009 07:45:31 -0700 Subject: Input: allow certain EV_ABS events to bypass all filtering With the upcoming multi-touch interface as an example, there is a need to make certain that all reported events actually get passed to the event handler. This patch equips the input core with the ability to bypass all filtering for certain EV_ABS events. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input.c b/drivers/input/input.c index 935a1835..8ff92aa 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -29,6 +29,14 @@ MODULE_LICENSE("GPL"); #define INPUT_DEVICES 256 +/* + * EV_ABS events which should not be cached are listed here. + */ +static unsigned int input_abs_bypass_init_data[] __initdata = { + 0 +}; +static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; + static LIST_HEAD(input_dev_list); static LIST_HEAD(input_handler_list); @@ -192,6 +200,11 @@ static void input_handle_event(struct input_dev *dev, case EV_ABS: if (is_event_supported(code, dev->absbit, ABS_MAX)) { + if (test_bit(code, input_abs_bypass)) { + disposition = INPUT_PASS_TO_HANDLERS; + break; + } + value = input_defuzz_abs_event(value, dev->abs[code], dev->absfuzz[code]); @@ -1634,10 +1647,20 @@ static const struct file_operations input_fops = { .open = input_open_file, }; +static void __init input_init_abs_bypass(void) +{ + const unsigned int *p; + + for (p = input_abs_bypass_init_data; *p; p++) + input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p); +} + static int __init input_init(void) { int err; + input_init_abs_bypass(); + err = class_register(&input_class); if (err) { printk(KERN_ERR "input: unable to register input_dev class\n"); -- cgit v0.10.2 From 5e5ee686e3c0f8a3cbe9b75c2690326bf91af10d Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 28 Apr 2009 07:47:33 -0700 Subject: Input: add detailed multi-touch finger data report protocol In order to utilize the full power of the new multi-touch devices, a way to report detailed finger data to user space is needed. This patch adds a multi-touch (MT) protocol which allows drivers to report details for an arbitrary number of fingers. The driver sends a SYN_MT_REPORT event via the input_mt_sync() function when a complete finger has been reported. In order to stay compatible with existing applications, the data reported in a finger packet must not be recognized as single-touch events. In addition, all finger data must bypass input filtering, since subsequent events of the same type refer to different fingers. A set of ABS_MT events with the desired properties are defined. The events are divided into categories, to allow for partial implementation. The minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size of the approaching finger. Anisotropy and direction may be specified with ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with more granular information may specify general shapes as blobs, i.e., as a sequence of rectangular shapes grouped together by a ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a finger or a pen. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input.c b/drivers/input/input.c index 8ff92aa..e54e002 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -33,6 +33,15 @@ MODULE_LICENSE("GPL"); * EV_ABS events which should not be cached are listed here. */ static unsigned int input_abs_bypass_init_data[] __initdata = { + ABS_MT_TOUCH_MAJOR, + ABS_MT_TOUCH_MINOR, + ABS_MT_WIDTH_MAJOR, + ABS_MT_WIDTH_MINOR, + ABS_MT_ORIENTATION, + ABS_MT_POSITION_X, + ABS_MT_POSITION_Y, + ABS_MT_TOOL_TYPE, + ABS_MT_BLOB_ID, 0 }; static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; @@ -169,6 +178,10 @@ static void input_handle_event(struct input_dev *dev, disposition = INPUT_PASS_TO_HANDLERS; } break; + case SYN_MT_REPORT: + dev->sync = 0; + disposition = INPUT_PASS_TO_HANDLERS; + break; } break; diff --git a/include/linux/input.h b/include/linux/input.h index 32cb825..0e6ff5d 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -106,6 +106,7 @@ struct input_absinfo { #define SYN_REPORT 0 #define SYN_CONFIG 1 +#define SYN_MT_REPORT 2 /* * Keys and buttons @@ -645,6 +646,17 @@ struct input_absinfo { #define ABS_TOOL_WIDTH 0x1c #define ABS_VOLUME 0x20 #define ABS_MISC 0x28 + +#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ +#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ +#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ +#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ +#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ +#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ +#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ +#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ + #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) @@ -744,6 +756,12 @@ struct input_absinfo { #define BUS_ATARI 0x1B /* + * MT_TOOL types + */ +#define MT_TOOL_FINGER 0 +#define MT_TOOL_PEN 1 + +/* * Values describing the status of a force-feedback effect */ #define FF_STATUS_STOPPED 0x00 @@ -1312,6 +1330,11 @@ static inline void input_sync(struct input_dev *dev) input_event(dev, EV_SYN, SYN_REPORT, 0); } +static inline void input_mt_sync(struct input_dev *dev) +{ + input_event(dev, EV_SYN, SYN_MT_REPORT, 0); +} + void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code); static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat) -- cgit v0.10.2 From 9f6532519feab921856f41b30a2397ee25f4de49 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 3 Apr 2009 21:31:30 -0700 Subject: regulator: fix header file missing kernel-doc Add regulator header file missing kernel-doc: Warning(include/linux/regulator/driver.h:117): No description found for parameter 'set_mode' Signed-off-by: Randy Dunlap cc: Liam Girdwood cc: Mark Brown Signed-off-by: Liam Girdwood diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 4848d8d..225f733 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -50,6 +50,7 @@ enum regulator_status { * @set_current_limit: Configure a limit for a current-limited regulator. * @get_current_limit: Get the configured limit for a current-limited regulator. * + * @set_mode: Set the configured operating mode for the regulator. * @get_mode: Get the configured operating mode for the regulator. * @get_status: Return actual (not as-configured) status of regulator, as a * REGULATOR_STATUS value (or negative errno) -- cgit v0.10.2 From 036de8efae4b81f8e1504fab654070cecce6dfa9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 8 Apr 2009 13:52:39 +0300 Subject: unreachable code in drms_uA_update() I removed the extra semi-colon and indented the return statement. The unreachable code was found by smatch (http://repo.or.cz/w/smatch.git). The patch was compile tested. regards, dan carpenter Signed-off-by: Dan Carpenter Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 01f7702..47fc6e6 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -540,8 +540,8 @@ static void drms_uA_update(struct regulator_dev *rdev) err = regulator_check_drms(rdev); if (err < 0 || !rdev->desc->ops->get_optimum_mode || - !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode); - return; + !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode) + return; /* get output voltage */ output_uV = rdev->desc->ops->get_voltage(rdev); -- cgit v0.10.2 From cd78dfc6c6e321a310a73ef7b0df3d262704dd55 Mon Sep 17 00:00:00 2001 From: Diego Liziero Date: Tue, 14 Apr 2009 03:04:47 +0200 Subject: drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or REGULATOR_CURRENT When regulator_desc->type is something different from REGULATOR_VOLTAGE or REGULATOR_CURRENT the if should probably return ERR_PTR(-EINVAL) The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) @@ expression E; constant C; @@ ( - !E == C + E != C ) Signed-off-by: Diego Liziero Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 47fc6e6..cb62be6 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2001,8 +2001,8 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, if (regulator_desc->name == NULL || regulator_desc->ops == NULL) return ERR_PTR(-EINVAL); - if (!regulator_desc->type == REGULATOR_VOLTAGE && - !regulator_desc->type == REGULATOR_CURRENT) + if (regulator_desc->type != REGULATOR_VOLTAGE && + regulator_desc->type != REGULATOR_CURRENT) return ERR_PTR(-EINVAL); if (!init_data) -- cgit v0.10.2 From 53032dafc6b93ac178ca2340ff8eb4ee2b3d1a92 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sat, 25 Apr 2009 05:28:36 -0600 Subject: regulator core: fix double-free in regulator_register() error path During regulator registration, any error after device_register() will cause a double-free on the struct regulator_dev 'rdev'. The bug is in drivers/regulator/core.c:regulator_register(): ... scrub: device_unregister(&rdev->dev); clean: kfree(rdev); <--- rdev = ERR_PTR(ret); goto out; ... device_unregister() calls regulator_dev_release() which frees rdev. The subsequent kfree corrupts memory and causes some OMAP3 systems to oops on boot in regulator_get(). Applies against 2.6.30-rc3. Signed-off-by: Paul Walmsley Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index cb62be6..2f14c16 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2080,6 +2080,10 @@ out: scrub: device_unregister(&rdev->dev); + /* device core frees rdev */ + rdev = ERR_PTR(ret); + goto out; + clean: kfree(rdev); rdev = ERR_PTR(ret); -- cgit v0.10.2 From aa61d558f0f9f8b303b9cab1e51e9886896ba1a3 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 26 Apr 2009 11:49:30 +0300 Subject: regulator/virtual: fix strings compare predicates Signed-off-by: Mike Rapoport Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c index 3d08348..71403fa 100644 --- a/drivers/regulator/virtual.c +++ b/drivers/regulator/virtual.c @@ -230,13 +230,13 @@ static ssize_t set_mode(struct device *dev, struct device_attribute *attr, * sysfs_streq() doesn't need the \n's, but we add them so the strings * will be shared with show_mode(), above. */ - if (sysfs_streq(buf, "fast\n") == 0) + if (sysfs_streq(buf, "fast\n")) mode = REGULATOR_MODE_FAST; - else if (sysfs_streq(buf, "normal\n") == 0) + else if (sysfs_streq(buf, "normal\n")) mode = REGULATOR_MODE_NORMAL; - else if (sysfs_streq(buf, "idle\n") == 0) + else if (sysfs_streq(buf, "idle\n")) mode = REGULATOR_MODE_IDLE; - else if (sysfs_streq(buf, "standby\n") == 0) + else if (sysfs_streq(buf, "standby\n")) mode = REGULATOR_MODE_STANDBY; else { dev_err(dev, "Configuring invalid mode\n"); -- cgit v0.10.2 From 030853b7abdd6effb9cb44f29e60d1d7a9592210 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 28 Apr 2009 13:34:14 +0200 Subject: regulator/bq24022: fix bug in is_enabled function This seems to be fallout from last October's regulator core rework. It got noticed only because of recent regulator framework changes. Signed-off-by: Philipp Zabel Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 7ecb820..d08cd9b 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -61,8 +61,7 @@ static int bq24022_disable(struct regulator_dev *rdev) static int bq24022_is_enabled(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); return !gpio_get_value(pdata->gpio_nce); } -- cgit v0.10.2 From 3e59091828ed5406c879b899b4257fcef7271e2c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 28 Apr 2009 11:09:38 +0100 Subject: regulator: Fix default constraints for fixed voltage regulators Default voltage constraints were being provided for fixed voltage regulator where board constraints were not provided but these constraints used INT_MIN as the default minimum voltage which is not a valid value since it is less than zero. Use 1uV instead. Also set the default values we set in the constraints themselves since otherwise the max_uV constraint we determine will not be stored in the actual constraint strucutre and will therefore not be used. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 2f14c16..98c3a74 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -703,10 +703,13 @@ static int set_machine_constraints(struct regulator_dev *rdev, int cmin = constraints->min_uV; int cmax = constraints->max_uV; - /* it's safe to autoconfigure fixed-voltage supplies */ + /* it's safe to autoconfigure fixed-voltage supplies + and the constraints are used by list_voltage. */ if (count == 1 && !cmin) { - cmin = INT_MIN; + cmin = 1; cmax = INT_MAX; + constraints->min_uV = cmin; + constraints->max_uV = cmax; } /* voltage constraints are optional */ -- cgit v0.10.2 From 39f36b47caae1443eb37c34c6def108bb79f8d25 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 12:38:32 +0900 Subject: mg_disk: fix locking IRQ and timeout handlers call functions which expect locked queue lock without locking it. Fix it. While at it, convert 0s used as null pointer constant to NULLs. [ Impact: fix locking, cleanup ] Signed-off-by: Tejun Heo Cc: unsik Kim diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index fb39d9a..d3e72ad 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -160,11 +160,16 @@ static irqreturn_t mg_irq(int irq, void *dev_id) struct mg_host *host = dev_id; void (*handler)(struct mg_host *) = host->mg_do_intr; - host->mg_do_intr = 0; + spin_lock(&host->lock); + + host->mg_do_intr = NULL; del_timer(&host->timer); if (!handler) handler = mg_unexpected_intr; handler(host); + + spin_unlock(&host->lock); + return IRQ_HANDLED; } @@ -319,7 +324,7 @@ static void mg_read(struct request *req) remains = req->nr_sectors; - if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, 0) != + if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, NULL) != MG_ERR_NONE) mg_bad_rw_intr(host); @@ -363,7 +368,7 @@ static void mg_write(struct request *req) remains = req->nr_sectors; - if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, 0) != + if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, NULL) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; @@ -521,9 +526,11 @@ void mg_times_out(unsigned long data) char *name; struct request *req; + spin_lock_irq(&host->lock); + req = elv_next_request(host->breq); if (!req) - return; + goto out_unlock; host->mg_do_intr = NULL; @@ -534,6 +541,8 @@ void mg_times_out(unsigned long data) mg_bad_rw_intr(host); mg_request(host->breq); +out_unlock: + spin_unlock_irq(&host->lock); } static void mg_request_poll(struct request_queue *q) -- cgit v0.10.2 From 0d9f346fb0cd6d6fc70827c5396a0d83939530e4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 28 Apr 2009 12:38:33 +0900 Subject: mg_disk: fix CONFIG_LBD=y warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/block/mg_disk.c: In function ‘mg_dump_status’: drivers/block/mg_disk.c:265: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘sector_t’ [ Impact: kill build warning ] Cc: unsik Kim Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index d3e72ad..f389835 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -79,7 +79,7 @@ static void mg_dump_status(const char *msg, unsigned int stat, if (host->breq) { req = elv_next_request(host->breq); if (req) - printk(", sector=%ld", req->sector); + printk(", sector=%u", (u32)req->sector); } } -- cgit v0.10.2 From 0191944282e84931f92915b5f06b348a92dac7e1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 12:38:33 +0900 Subject: hd: fix locking hd dance around local irq and HD_IRQ enable without achieving much. It ends up transferring data from irq handler with both local irq and HD_IRQ disabled. The only place it actually does something is while transferring the first block of a request which it does with HD_IRQ disabled but local irq enabled. Unfortunately, the dancing is horribly broken from locking POV. IRQ and timeout handlers access block queue without grabbing the queue lock and running the driver in SMP configuration crashes the whole machine pretty quickly. Remove meaningless irq enable/disable dancing and add proper locking in issue, irq and timeout paths. Signed-off-by: Tejun Heo diff --git a/drivers/block/hd.c b/drivers/block/hd.c index 3c11f06..baaa9e4 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -509,7 +509,6 @@ ok_to_write: if (i > 0) { SET_HANDLER(&write_intr); outsw(HD_DATA, req->buffer, 256); - local_irq_enable(); } else { #if (HD_DELAY > 0) last_req = read_timer(); @@ -541,8 +540,7 @@ static void hd_times_out(unsigned long dummy) if (!CURRENT) return; - disable_irq(HD_IRQ); - local_irq_enable(); + spin_lock_irq(hd_queue->queue_lock); reset = 1; name = CURRENT->rq_disk->disk_name; printk("%s: timeout\n", name); @@ -552,9 +550,8 @@ static void hd_times_out(unsigned long dummy) #endif end_request(CURRENT, 0); } - local_irq_disable(); hd_request(); - enable_irq(HD_IRQ); + spin_unlock_irq(hd_queue->queue_lock); } static int do_special_op(struct hd_i_struct *disk, struct request *req) @@ -592,7 +589,6 @@ static void hd_request(void) return; repeat: del_timer(&device_timer); - local_irq_enable(); req = CURRENT; if (!req) { @@ -601,7 +597,6 @@ repeat: } if (reset) { - local_irq_disable(); reset_hd(); return; } @@ -660,9 +655,7 @@ repeat: static void do_hd_request(struct request_queue *q) { - disable_irq(HD_IRQ); hd_request(); - enable_irq(HD_IRQ); } static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo) @@ -684,12 +677,16 @@ static irqreturn_t hd_interrupt(int irq, void *dev_id) { void (*handler)(void) = do_hd; + spin_lock(hd_queue->queue_lock); + do_hd = NULL; del_timer(&device_timer); if (!handler) handler = unexpected_hd_interrupt; handler(); - local_irq_enable(); + + spin_unlock(hd_queue->queue_lock); + return IRQ_HANDLED; } -- cgit v0.10.2 From 69838727bcd819a8fd73a88447801221788b0c6d Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 28 Apr 2009 20:24:29 +0200 Subject: bio: fix memcpy corruption in bio_copy_user_iov() st driver uses blk_rq_map_user() in order to just build a request out of page frames. In this case, map_data->offset is a non zero value and iov[0].iov_base is NULL. We need to increase nr_pages for that. Cc: stable@kernel.org Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index 7bbc98f..9871164 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -817,6 +817,9 @@ struct bio *bio_copy_user_iov(struct request_queue *q, len += iov[i].iov_len; } + if (offset) + nr_pages++; + bmd = bio_alloc_map_data(nr_pages, iov_count, gfp_mask); if (!bmd) return ERR_PTR(-ENOMEM); -- cgit v0.10.2 From 6269b731560d69c5eaa929909891edec39496d71 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 22 Apr 2009 15:11:05 +1000 Subject: wireless: remove unneeded EXPORT_SYMBOL the tickles a powerpc compiler bug drivers/net/wireless/iwlwifi/iwl3945-base.c:1415: error: __ksymtab_iwl3945_rx_queue_reset causes a section type conflict I am pretty sure that this is a compiler bug, so not to worry. However, as far as I can see, iwl-3945.o (the only user) and iwl3945-base.o are always linked into the same module, so the EXPORT_SYMBOL (which causes the problem) should not be needed. Correct? Signed-off-by: Stephen Rothwell Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 617c423..70a00c8 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1694,7 +1694,6 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) rxq->free_count = 0; spin_unlock_irqrestore(&rxq->lock, flags); } -EXPORT_SYMBOL(iwl3945_rx_queue_reset); /* * this should be called while priv->lock is locked -- cgit v0.10.2 From e805e4d0b53506dff4255a2792483f094e7fcd2c Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Wed, 22 Apr 2009 10:59:37 +0300 Subject: rndis_wlan: fix initialization order for workqueue&workers rndis_wext_link_change() might be called from rndis_command() at initialization stage and priv->workqueue/priv->work have not been initialized yet. This causes invalid opcode at rndis_wext_bind on some brands of bcm4320. Fix by initializing workqueue/workers in rndis_wext_bind() before rndis_command is used. This bug has existed since 2.6.25, reported at: http://bugzilla.kernel.org/show_bug.cgi?id=12794 Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index db91db7..bebf735 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2558,6 +2558,11 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) mutex_init(&priv->command_lock); spin_lock_init(&priv->stats_lock); + /* because rndis_command() sleeps we need to use workqueue */ + priv->workqueue = create_singlethread_workqueue("rndis_wlan"); + INIT_WORK(&priv->work, rndis_wext_worker); + INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); + /* try bind rndis_host */ retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS); if (retval < 0) @@ -2603,16 +2608,17 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) disassociate(usbdev, 1); netif_carrier_off(usbdev->net); - /* because rndis_command() sleeps we need to use workqueue */ - priv->workqueue = create_singlethread_workqueue("rndis_wlan"); - INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); queue_delayed_work(priv->workqueue, &priv->stats_work, round_jiffies_relative(STATS_UPDATE_JIFFIES)); - INIT_WORK(&priv->work, rndis_wext_worker); return 0; fail: + cancel_delayed_work_sync(&priv->stats_work); + cancel_work_sync(&priv->work); + flush_workqueue(priv->workqueue); + destroy_workqueue(priv->workqueue); + kfree(priv); return retval; } -- cgit v0.10.2 From 74aa9be0ea0ffeb233f45c39f3cf594b68bbbb89 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2009 10:45:04 +0200 Subject: iwlwifi: notify on scan completion even when shutting down Under certain circumstances iwlwifi can get stuck and will no longer accept scan requests, because the core code (cfg80211) thinks that it's still processing one. This fixes one of the points where it can happen, but I've still seen it (although only with my radio-off-when-idle patch). Signed-off-by: Johannes Berg Acked-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 23644cf..e7c65c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -925,11 +925,11 @@ void iwl_bg_scan_completed(struct work_struct *work) IWL_DEBUG_SCAN(priv, "SCAN complete scan\n"); + ieee80211_scan_completed(priv->hw, false); + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - ieee80211_scan_completed(priv->hw, false); - /* Since setting the TXPOWER may have been deferred while * performing the scan, fire one off */ mutex_lock(&priv->mutex); -- cgit v0.10.2 From b7fcb5c4a4c27da2f6d86cb03d18687e537442cf Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 27 Apr 2009 22:12:43 -0400 Subject: ath5k: fix buffer overrun in rate debug code char bname[5] is too small for the string "X GHz" when the null terminator is taken into account. Thus, turning on rate debugging can crash unless we have lucky stack alignment. Cc: stable@kernel.org Reported-by: Paride Legovini Signed-off-by: Bob Copeland Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 9770bb3..4904a07 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -424,7 +424,7 @@ ath5k_debug_dump_bands(struct ath5k_softc *sc) for (b = 0; b < IEEE80211_NUM_BANDS; b++) { struct ieee80211_supported_band *band = &sc->sbands[b]; - char bname[5]; + char bname[6]; switch (band->band) { case IEEE80211_BAND_2GHZ: strcpy(bname, "2 GHz"); -- cgit v0.10.2 From 13beadd91f148933f47947a88ab2c97a1ca9768d Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 28 Apr 2009 11:47:15 -0400 Subject: powerpc: Revert switch to TEXT_TEXT in linker script Commit edada399 broke the build on 64-bit powerpc because it moved the __ftr_alt_* sections of a file away from the .text section, causing link failures due to relative conditional branch targets being too far away from the branch instructions. This happens on pretty much all 64-bit powerpc configs. This change reverts commit edada399 while preserving the update from the *.refok sections to .ref.text that has happened since. Signed-off-by: Tim Abbott Requested-by: Paul Mackerras Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 433ae11..a047a6c 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -54,8 +54,8 @@ SECTIONS ALIGN_FUNCTION(); HEAD_TEXT _text = .; - TEXT_TEXT - *(.fixup __ftr_alt_*) + /* careful! __ftr_alt_* sections need to be close to .text */ + *(.text .fixup __ftr_alt_* .ref.text) SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v0.10.2 From 16752e2ead535c0e616c64d3fee8401ebd0c9f62 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Apr 2009 21:20:11 +0200 Subject: m68k: arch/m68k/kernel/sun3-head.S needs Fix this: arch/m68k/kernel/sun3-head.S: Assembler messages: arch/m68k/kernel/sun3-head.S:32: Error: Unknown operator -- statement `__head' ignored Introduced by commit 6f335cab0431d5df4995bcd4fd952d4c746d5a86 ("m68k: convert to use __HEAD and HEAD_TEXT macros."), which started using __HEAD without adding the appropriate include. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds diff --git a/arch/m68k/kernel/sun3-head.S b/arch/m68k/kernel/sun3-head.S index 9e5c3e5..43036bf 100644 --- a/arch/m68k/kernel/sun3-head.S +++ b/arch/m68k/kernel/sun3-head.S @@ -1,4 +1,5 @@ #include +#include #include #include -- cgit v0.10.2 From 942e4a2bd680c606af0211e64eb216be2e19bf61 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 28 Apr 2009 22:36:33 -0700 Subject: netfilter: revised locking for x_tables The x_tables are organized with a table structure and a per-cpu copies of the counters and rules. On older kernels there was a reader/writer lock per table which was a performance bottleneck. In 2.6.30-rc, this was converted to use RCU and the counters/rules which solved the performance problems for do_table but made replacing rules much slower because of the necessary RCU grace period. This version uses a per-cpu set of spinlocks and counters to allow to table processing to proceed without the cache thrashing of a global reader lock and keeps the same performance for table updates. Signed-off-by: Stephen Hemminger Acked-by: Linus Torvalds Signed-off-by: David S. Miller diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 7b1a652..1b2e435 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -354,9 +354,6 @@ struct xt_table /* What hooks you will enter on */ unsigned int valid_hooks; - /* Lock for the curtain */ - struct mutex lock; - /* Man behind the curtain... */ struct xt_table_info *private; @@ -434,8 +431,74 @@ extern void xt_proto_fini(struct net *net, u_int8_t af); extern struct xt_table_info *xt_alloc_table_info(unsigned int size); extern void xt_free_table_info(struct xt_table_info *info); -extern void xt_table_entry_swap_rcu(struct xt_table_info *old, - struct xt_table_info *new); + +/* + * Per-CPU spinlock associated with per-cpu table entries, and + * with a counter for the "reading" side that allows a recursive + * reader to avoid taking the lock and deadlocking. + * + * "reading" is used by ip/arp/ip6 tables rule processing which runs per-cpu. + * It needs to ensure that the rules are not being changed while the packet + * is being processed. In some cases, the read lock will be acquired + * twice on the same CPU; this is okay because of the count. + * + * "writing" is used when reading counters. + * During replace any readers that are using the old tables have to complete + * before freeing the old table. This is handled by the write locking + * necessary for reading the counters. + */ +struct xt_info_lock { + spinlock_t lock; + unsigned char readers; +}; +DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks); + +/* + * Note: we need to ensure that preemption is disabled before acquiring + * the per-cpu-variable, so we do it as a two step process rather than + * using "spin_lock_bh()". + * + * We _also_ need to disable bottom half processing before updating our + * nesting count, to make sure that the only kind of re-entrancy is this + * code being called by itself: since the count+lock is not an atomic + * operation, we can allow no races. + * + * _Only_ that special combination of being per-cpu and never getting + * re-entered asynchronously means that the count is safe. + */ +static inline void xt_info_rdlock_bh(void) +{ + struct xt_info_lock *lock; + + local_bh_disable(); + lock = &__get_cpu_var(xt_info_locks); + if (!lock->readers++) + spin_lock(&lock->lock); +} + +static inline void xt_info_rdunlock_bh(void) +{ + struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks); + + if (!--lock->readers) + spin_unlock(&lock->lock); + local_bh_enable(); +} + +/* + * The "writer" side needs to get exclusive access to the lock, + * regardless of readers. This must be called with bottom half + * processing (and thus also preemption) disabled. + */ +static inline void xt_info_wrlock(unsigned int cpu) +{ + spin_lock(&per_cpu(xt_info_locks, cpu).lock); +} + +static inline void xt_info_wrunlock(unsigned int cpu) +{ + spin_unlock(&per_cpu(xt_info_locks, cpu).lock); +} /* * This helper is performance critical and must be inlined diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c index 5ba533d..831fe18 100644 --- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -253,9 +253,9 @@ unsigned int arpt_do_table(struct sk_buff *skb, indev = in ? in->name : nulldevname; outdev = out ? out->name : nulldevname; - rcu_read_lock_bh(); - private = rcu_dereference(table->private); - table_base = rcu_dereference(private->entries[smp_processor_id()]); + xt_info_rdlock_bh(); + private = table->private; + table_base = private->entries[smp_processor_id()]; e = get_entry(table_base, private->hook_entry[hook]); back = get_entry(table_base, private->underflow[hook]); @@ -273,6 +273,7 @@ unsigned int arpt_do_table(struct sk_buff *skb, hdr_len = sizeof(*arp) + (2 * sizeof(struct in_addr)) + (2 * skb->dev->addr_len); + ADD_COUNTER(e->counters, hdr_len, 1); t = arpt_get_target(e); @@ -328,8 +329,7 @@ unsigned int arpt_do_table(struct sk_buff *skb, e = (void *)e + e->next_offset; } } while (!hotdrop); - - rcu_read_unlock_bh(); + xt_info_rdunlock_bh(); if (hotdrop) return NF_DROP; @@ -711,9 +711,12 @@ static void get_counters(const struct xt_table_info *t, /* Instead of clearing (by a previous call to memset()) * the counters and using adds, we set the counters * with data used by 'current' CPU - * We dont care about preemption here. + * + * Bottom half has to be disabled to prevent deadlock + * if new softirq were to run and call ipt_do_table */ - curcpu = raw_smp_processor_id(); + local_bh_disable(); + curcpu = smp_processor_id(); i = 0; ARPT_ENTRY_ITERATE(t->entries[curcpu], @@ -726,73 +729,22 @@ static void get_counters(const struct xt_table_info *t, if (cpu == curcpu) continue; i = 0; + xt_info_wrlock(cpu); ARPT_ENTRY_ITERATE(t->entries[cpu], t->size, add_entry_to_counter, counters, &i); + xt_info_wrunlock(cpu); } -} - - -/* We're lazy, and add to the first CPU; overflow works its fey magic - * and everything is OK. */ -static int -add_counter_to_entry(struct arpt_entry *e, - const struct xt_counters addme[], - unsigned int *i) -{ - ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt); - - (*i)++; - return 0; -} - -/* Take values from counters and add them back onto the current cpu */ -static void put_counters(struct xt_table_info *t, - const struct xt_counters counters[]) -{ - unsigned int i, cpu; - - local_bh_disable(); - cpu = smp_processor_id(); - i = 0; - ARPT_ENTRY_ITERATE(t->entries[cpu], - t->size, - add_counter_to_entry, - counters, - &i); local_bh_enable(); } -static inline int -zero_entry_counter(struct arpt_entry *e, void *arg) -{ - e->counters.bcnt = 0; - e->counters.pcnt = 0; - return 0; -} - -static void -clone_counters(struct xt_table_info *newinfo, const struct xt_table_info *info) -{ - unsigned int cpu; - const void *loc_cpu_entry = info->entries[raw_smp_processor_id()]; - - memcpy(newinfo, info, offsetof(struct xt_table_info, entries)); - for_each_possible_cpu(cpu) { - memcpy(newinfo->entries[cpu], loc_cpu_entry, info->size); - ARPT_ENTRY_ITERATE(newinfo->entries[cpu], newinfo->size, - zero_entry_counter, NULL); - } -} - static struct xt_counters *alloc_counters(struct xt_table *table) { unsigned int countersize; struct xt_counters *counters; struct xt_table_info *private = table->private; - struct xt_table_info *info; /* We need atomic snapshot of counters: rest doesn't change * (other than comefrom, which userspace doesn't care @@ -802,30 +754,11 @@ static struct xt_counters *alloc_counters(struct xt_table *table) counters = vmalloc_node(countersize, numa_node_id()); if (counters == NULL) - goto nomem; - - info = xt_alloc_table_info(private->size); - if (!info) - goto free_counters; - - clone_counters(info, private); - - mutex_lock(&table->lock); - xt_table_entry_swap_rcu(private, info); - synchronize_net(); /* Wait until smoke has cleared */ + return ERR_PTR(-ENOMEM); - get_counters(info, counters); - put_counters(private, counters); - mutex_unlock(&table->lock); - - xt_free_table_info(info); + get_counters(private, counters); return counters; - - free_counters: - vfree(counters); - nomem: - return ERR_PTR(-ENOMEM); } static int copy_entries_to_user(unsigned int total_size, @@ -1094,8 +1027,9 @@ static int __do_replace(struct net *net, const char *name, (newinfo->number <= oldinfo->initial_entries)) module_put(t->me); - /* Get the old counters. */ + /* Get the old counters, and synchronize with replace */ get_counters(oldinfo, counters); + /* Decrease module usage counts and free resource */ loc_cpu_old_entry = oldinfo->entries[raw_smp_processor_id()]; ARPT_ENTRY_ITERATE(loc_cpu_old_entry, oldinfo->size, cleanup_entry, @@ -1165,10 +1099,23 @@ static int do_replace(struct net *net, void __user *user, unsigned int len) return ret; } +/* We're lazy, and add to the first CPU; overflow works its fey magic + * and everything is OK. */ +static int +add_counter_to_entry(struct arpt_entry *e, + const struct xt_counters addme[], + unsigned int *i) +{ + ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt); + + (*i)++; + return 0; +} + static int do_add_counters(struct net *net, void __user *user, unsigned int len, int compat) { - unsigned int i; + unsigned int i, curcpu; struct xt_counters_info tmp; struct xt_counters *paddc; unsigned int num_counters; @@ -1224,26 +1171,26 @@ static int do_add_counters(struct net *net, void __user *user, unsigned int len, goto free; } - mutex_lock(&t->lock); + local_bh_disable(); private = t->private; if (private->number != num_counters) { ret = -EINVAL; goto unlock_up_free; } - preempt_disable(); i = 0; /* Choose the copy that is on our node */ - loc_cpu_entry = private->entries[smp_processor_id()]; + curcpu = smp_processor_id(); + loc_cpu_entry = private->entries[curcpu]; + xt_info_wrlock(curcpu); ARPT_ENTRY_ITERATE(loc_cpu_entry, private->size, add_counter_to_entry, paddc, &i); - preempt_enable(); + xt_info_wrunlock(curcpu); unlock_up_free: - mutex_unlock(&t->lock); - + local_bh_enable(); xt_table_unlock(t); module_put(t->me); free: diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index 810c0b6..2ec8d72 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -338,10 +338,9 @@ ipt_do_table(struct sk_buff *skb, tgpar.hooknum = hook; IP_NF_ASSERT(table->valid_hooks & (1 << hook)); - - rcu_read_lock_bh(); - private = rcu_dereference(table->private); - table_base = rcu_dereference(private->entries[smp_processor_id()]); + xt_info_rdlock_bh(); + private = table->private; + table_base = private->entries[smp_processor_id()]; e = get_entry(table_base, private->hook_entry[hook]); @@ -436,8 +435,7 @@ ipt_do_table(struct sk_buff *skb, e = (void *)e + e->next_offset; } } while (!hotdrop); - - rcu_read_unlock_bh(); + xt_info_rdunlock_bh(); #ifdef DEBUG_ALLOW_ALL return NF_ACCEPT; @@ -896,10 +894,13 @@ get_counters(const struct xt_table_info *t, /* Instead of clearing (by a previous call to memset()) * the counters and using adds, we set the counters - * with data used by 'current' CPU - * We dont care about preemption here. + * with data used by 'current' CPU. + * + * Bottom half has to be disabled to prevent deadlock + * if new softirq were to run and call ipt_do_table */ - curcpu = raw_smp_processor_id(); + local_bh_disable(); + curcpu = smp_processor_id(); i = 0; IPT_ENTRY_ITERATE(t->entries[curcpu], @@ -912,74 +913,22 @@ get_counters(const struct xt_table_info *t, if (cpu == curcpu) continue; i = 0; + xt_info_wrlock(cpu); IPT_ENTRY_ITERATE(t->entries[cpu], t->size, add_entry_to_counter, counters, &i); + xt_info_wrunlock(cpu); } - -} - -/* We're lazy, and add to the first CPU; overflow works its fey magic - * and everything is OK. */ -static int -add_counter_to_entry(struct ipt_entry *e, - const struct xt_counters addme[], - unsigned int *i) -{ - ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt); - - (*i)++; - return 0; -} - -/* Take values from counters and add them back onto the current cpu */ -static void put_counters(struct xt_table_info *t, - const struct xt_counters counters[]) -{ - unsigned int i, cpu; - - local_bh_disable(); - cpu = smp_processor_id(); - i = 0; - IPT_ENTRY_ITERATE(t->entries[cpu], - t->size, - add_counter_to_entry, - counters, - &i); local_bh_enable(); } - -static inline int -zero_entry_counter(struct ipt_entry *e, void *arg) -{ - e->counters.bcnt = 0; - e->counters.pcnt = 0; - return 0; -} - -static void -clone_counters(struct xt_table_info *newinfo, const struct xt_table_info *info) -{ - unsigned int cpu; - const void *loc_cpu_entry = info->entries[raw_smp_processor_id()]; - - memcpy(newinfo, info, offsetof(struct xt_table_info, entries)); - for_each_possible_cpu(cpu) { - memcpy(newinfo->entries[cpu], loc_cpu_entry, info->size); - IPT_ENTRY_ITERATE(newinfo->entries[cpu], newinfo->size, - zero_entry_counter, NULL); - } -} - static struct xt_counters * alloc_counters(struct xt_table *table) { unsigned int countersize; struct xt_counters *counters; struct xt_table_info *private = table->private; - struct xt_table_info *info; /* We need atomic snapshot of counters: rest doesn't change (other than comefrom, which userspace doesn't care @@ -988,30 +937,11 @@ static struct xt_counters * alloc_counters(struct xt_table *table) counters = vmalloc_node(countersize, numa_node_id()); if (counters == NULL) - goto nomem; + return ERR_PTR(-ENOMEM); - info = xt_alloc_table_info(private->size); - if (!info) - goto free_counters; - - clone_counters(info, private); - - mutex_lock(&table->lock); - xt_table_entry_swap_rcu(private, info); - synchronize_net(); /* Wait until smoke has cleared */ - - get_counters(info, counters); - put_counters(private, counters); - mutex_unlock(&table->lock); - - xt_free_table_info(info); + get_counters(private, counters); return counters; - - free_counters: - vfree(counters); - nomem: - return ERR_PTR(-ENOMEM); } static int @@ -1306,8 +1236,9 @@ __do_replace(struct net *net, const char *name, unsigned int valid_hooks, (newinfo->number <= oldinfo->initial_entries)) module_put(t->me); - /* Get the old counters. */ + /* Get the old counters, and synchronize with replace */ get_counters(oldinfo, counters); + /* Decrease module usage counts and free resource */ loc_cpu_old_entry = oldinfo->entries[raw_smp_processor_id()]; IPT_ENTRY_ITERATE(loc_cpu_old_entry, oldinfo->size, cleanup_entry, @@ -1377,11 +1308,23 @@ do_replace(struct net *net, void __user *user, unsigned int len) return ret; } +/* We're lazy, and add to the first CPU; overflow works its fey magic + * and everything is OK. */ +static int +add_counter_to_entry(struct ipt_entry *e, + const struct xt_counters addme[], + unsigned int *i) +{ + ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt); + + (*i)++; + return 0; +} static int do_add_counters(struct net *net, void __user *user, unsigned int len, int compat) { - unsigned int i; + unsigned int i, curcpu; struct xt_counters_info tmp; struct xt_counters *paddc; unsigned int num_counters; @@ -1437,25 +1380,26 @@ do_add_counters(struct net *net, void __user *user, unsigned int len, int compat goto free; } - mutex_lock(&t->lock); + local_bh_disable(); private = t->private; if (private->number != num_counters) { ret = -EINVAL; goto unlock_up_free; } - preempt_disable(); i = 0; /* Choose the copy that is on our node */ - loc_cpu_entry = private->entries[raw_smp_processor_id()]; + curcpu = smp_processor_id(); + loc_cpu_entry = private->entries[curcpu]; + xt_info_wrlock(curcpu); IPT_ENTRY_ITERATE(loc_cpu_entry, private->size, add_counter_to_entry, paddc, &i); - preempt_enable(); + xt_info_wrunlock(curcpu); unlock_up_free: - mutex_unlock(&t->lock); + local_bh_enable(); xt_table_unlock(t); module_put(t->me); free: diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 800ae85..219e165 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -365,9 +365,9 @@ ip6t_do_table(struct sk_buff *skb, IP_NF_ASSERT(table->valid_hooks & (1 << hook)); - rcu_read_lock_bh(); - private = rcu_dereference(table->private); - table_base = rcu_dereference(private->entries[smp_processor_id()]); + xt_info_rdlock_bh(); + private = table->private; + table_base = private->entries[smp_processor_id()]; e = get_entry(table_base, private->hook_entry[hook]); @@ -466,7 +466,7 @@ ip6t_do_table(struct sk_buff *skb, #ifdef CONFIG_NETFILTER_DEBUG ((struct ip6t_entry *)table_base)->comefrom = NETFILTER_LINK_POISON; #endif - rcu_read_unlock_bh(); + xt_info_rdunlock_bh(); #ifdef DEBUG_ALLOW_ALL return NF_ACCEPT; @@ -926,9 +926,12 @@ get_counters(const struct xt_table_info *t, /* Instead of clearing (by a previous call to memset()) * the counters and using adds, we set the counters * with data used by 'current' CPU - * We dont care about preemption here. + * + * Bottom half has to be disabled to prevent deadlock + * if new softirq were to run and call ipt_do_table */ - curcpu = raw_smp_processor_id(); + local_bh_disable(); + curcpu = smp_processor_id(); i = 0; IP6T_ENTRY_ITERATE(t->entries[curcpu], @@ -941,72 +944,22 @@ get_counters(const struct xt_table_info *t, if (cpu == curcpu) continue; i = 0; + xt_info_wrlock(cpu); IP6T_ENTRY_ITERATE(t->entries[cpu], t->size, add_entry_to_counter, counters, &i); + xt_info_wrunlock(cpu); } -} - -/* We're lazy, and add to the first CPU; overflow works its fey magic - * and everything is OK. */ -static int -add_counter_to_entry(struct ip6t_entry *e, - const struct xt_counters addme[], - unsigned int *i) -{ - ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt); - - (*i)++; - return 0; -} - -/* Take values from counters and add them back onto the current cpu */ -static void put_counters(struct xt_table_info *t, - const struct xt_counters counters[]) -{ - unsigned int i, cpu; - - local_bh_disable(); - cpu = smp_processor_id(); - i = 0; - IP6T_ENTRY_ITERATE(t->entries[cpu], - t->size, - add_counter_to_entry, - counters, - &i); local_bh_enable(); } -static inline int -zero_entry_counter(struct ip6t_entry *e, void *arg) -{ - e->counters.bcnt = 0; - e->counters.pcnt = 0; - return 0; -} - -static void -clone_counters(struct xt_table_info *newinfo, const struct xt_table_info *info) -{ - unsigned int cpu; - const void *loc_cpu_entry = info->entries[raw_smp_processor_id()]; - - memcpy(newinfo, info, offsetof(struct xt_table_info, entries)); - for_each_possible_cpu(cpu) { - memcpy(newinfo->entries[cpu], loc_cpu_entry, info->size); - IP6T_ENTRY_ITERATE(newinfo->entries[cpu], newinfo->size, - zero_entry_counter, NULL); - } -} - static struct xt_counters *alloc_counters(struct xt_table *table) { unsigned int countersize; struct xt_counters *counters; struct xt_table_info *private = table->private; - struct xt_table_info *info; /* We need atomic snapshot of counters: rest doesn't change (other than comefrom, which userspace doesn't care @@ -1015,30 +968,11 @@ static struct xt_counters *alloc_counters(struct xt_table *table) counters = vmalloc_node(countersize, numa_node_id()); if (counters == NULL) - goto nomem; + return ERR_PTR(-ENOMEM); - info = xt_alloc_table_info(private->size); - if (!info) - goto free_counters; - - clone_counters(info, private); - - mutex_lock(&table->lock); - xt_table_entry_swap_rcu(private, info); - synchronize_net(); /* Wait until smoke has cleared */ - - get_counters(info, counters); - put_counters(private, counters); - mutex_unlock(&table->lock); - - xt_free_table_info(info); + get_counters(private, counters); return counters; - - free_counters: - vfree(counters); - nomem: - return ERR_PTR(-ENOMEM); } static int @@ -1334,8 +1268,9 @@ __do_replace(struct net *net, const char *name, unsigned int valid_hooks, (newinfo->number <= oldinfo->initial_entries)) module_put(t->me); - /* Get the old counters. */ + /* Get the old counters, and synchronize with replace */ get_counters(oldinfo, counters); + /* Decrease module usage counts and free resource */ loc_cpu_old_entry = oldinfo->entries[raw_smp_processor_id()]; IP6T_ENTRY_ITERATE(loc_cpu_old_entry, oldinfo->size, cleanup_entry, @@ -1405,11 +1340,24 @@ do_replace(struct net *net, void __user *user, unsigned int len) return ret; } +/* We're lazy, and add to the first CPU; overflow works its fey magic + * and everything is OK. */ +static int +add_counter_to_entry(struct ip6t_entry *e, + const struct xt_counters addme[], + unsigned int *i) +{ + ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt); + + (*i)++; + return 0; +} + static int do_add_counters(struct net *net, void __user *user, unsigned int len, int compat) { - unsigned int i; + unsigned int i, curcpu; struct xt_counters_info tmp; struct xt_counters *paddc; unsigned int num_counters; @@ -1465,25 +1413,28 @@ do_add_counters(struct net *net, void __user *user, unsigned int len, goto free; } - mutex_lock(&t->lock); + + local_bh_disable(); private = t->private; if (private->number != num_counters) { ret = -EINVAL; goto unlock_up_free; } - preempt_disable(); i = 0; /* Choose the copy that is on our node */ - loc_cpu_entry = private->entries[raw_smp_processor_id()]; + curcpu = smp_processor_id(); + xt_info_wrlock(curcpu); + loc_cpu_entry = private->entries[curcpu]; IP6T_ENTRY_ITERATE(loc_cpu_entry, private->size, add_counter_to_entry, paddc, &i); - preempt_enable(); + xt_info_wrunlock(curcpu); + unlock_up_free: - mutex_unlock(&t->lock); + local_bh_enable(); xt_table_unlock(t); module_put(t->me); free: diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c index 509a956..150e5cf 100644 --- a/net/netfilter/x_tables.c +++ b/net/netfilter/x_tables.c @@ -625,20 +625,6 @@ void xt_free_table_info(struct xt_table_info *info) } EXPORT_SYMBOL(xt_free_table_info); -void xt_table_entry_swap_rcu(struct xt_table_info *oldinfo, - struct xt_table_info *newinfo) -{ - unsigned int cpu; - - for_each_possible_cpu(cpu) { - void *p = oldinfo->entries[cpu]; - rcu_assign_pointer(oldinfo->entries[cpu], newinfo->entries[cpu]); - newinfo->entries[cpu] = p; - } - -} -EXPORT_SYMBOL_GPL(xt_table_entry_swap_rcu); - /* Find table by name, grabs mutex & ref. Returns ERR_PTR() on error. */ struct xt_table *xt_find_table_lock(struct net *net, u_int8_t af, const char *name) @@ -676,32 +662,43 @@ void xt_compat_unlock(u_int8_t af) EXPORT_SYMBOL_GPL(xt_compat_unlock); #endif +DEFINE_PER_CPU(struct xt_info_lock, xt_info_locks); +EXPORT_PER_CPU_SYMBOL_GPL(xt_info_locks); + + struct xt_table_info * xt_replace_table(struct xt_table *table, unsigned int num_counters, struct xt_table_info *newinfo, int *error) { - struct xt_table_info *oldinfo, *private; + struct xt_table_info *private; /* Do the substitution. */ - mutex_lock(&table->lock); + local_bh_disable(); private = table->private; + /* Check inside lock: is the old number correct? */ if (num_counters != private->number) { duprintf("num_counters != table->private->number (%u/%u)\n", num_counters, private->number); - mutex_unlock(&table->lock); + local_bh_enable(); *error = -EAGAIN; return NULL; } - oldinfo = private; - rcu_assign_pointer(table->private, newinfo); - newinfo->initial_entries = oldinfo->initial_entries; - mutex_unlock(&table->lock); - synchronize_net(); - return oldinfo; + table->private = newinfo; + newinfo->initial_entries = private->initial_entries; + + /* + * Even though table entries have now been swapped, other CPU's + * may still be using the old entries. This is okay, because + * resynchronization happens because of the locking done + * during the get_counters() routine. + */ + local_bh_enable(); + + return private; } EXPORT_SYMBOL_GPL(xt_replace_table); @@ -734,7 +731,6 @@ struct xt_table *xt_register_table(struct net *net, struct xt_table *table, /* Simplifies replace_table code. */ table->private = bootstrap; - mutex_init(&table->lock); if (!xt_replace_table(table, 0, newinfo, &ret)) goto unlock; @@ -1147,7 +1143,14 @@ static struct pernet_operations xt_net_ops = { static int __init xt_init(void) { - int i, rv; + unsigned int i; + int rv; + + for_each_possible_cpu(i) { + struct xt_info_lock *lock = &per_cpu(xt_info_locks, i); + spin_lock_init(&lock->lock); + lock->readers = 0; + } xt = kmalloc(sizeof(struct xt_af) * NFPROTO_NUMPROTO, GFP_KERNEL); if (!xt) -- cgit v0.10.2 From ac7c992cac0c8f276aa8e4a8273204a6db707bb3 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 28 Apr 2009 22:42:39 -0700 Subject: e100: do not go D3 in shutdown unless system is powering off After experimenting with kexec with the last merges after 2.6.29, I've had some problems when probing e100. It would not read the eeprom. After some bisects, I realized this has been like that since forever (at least 2.6.18). The problem is that shutdown is doing the same thing that suspend does and puts the device in D3 state. I couldn't find a way to get the device back to a sane state in the probe function. So, based on some similar patches from Rafael J. Wysocki for e1000, e1000e, and ixgbe, I wrote this one for e100. Signed-off-by: Thadeu Lima de Souza Cascardo Acked-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 5c0b457..0f9ee13 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2728,7 +2728,7 @@ static void __devexit e100_remove(struct pci_dev *pdev) #define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */ #define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */ #define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */ -static int e100_suspend(struct pci_dev *pdev, pm_message_t state) +static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct net_device *netdev = pci_get_drvdata(pdev); struct nic *nic = netdev_priv(netdev); @@ -2749,19 +2749,32 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state) E100_82552_SMARTSPEED, smartspeed | E100_82552_REV_ANEG | E100_82552_ANEG_NOW); } - if (pci_enable_wake(pdev, PCI_D3cold, true)) - pci_enable_wake(pdev, PCI_D3hot, true); + *enable_wake = true; } else { - pci_enable_wake(pdev, PCI_D3hot, false); + *enable_wake = false; } pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); +} - return 0; +static int __e100_power_off(struct pci_dev *pdev, bool wake) +{ + if (wake) { + return pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + return pci_set_power_state(pdev, PCI_D3hot); + } } #ifdef CONFIG_PM +static int e100_suspend(struct pci_dev *pdev, pm_message_t state) +{ + bool wake; + __e100_shutdown(pdev, &wake); + return __e100_power_off(pdev, wake); +} + static int e100_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -2792,7 +2805,10 @@ static int e100_resume(struct pci_dev *pdev) static void e100_shutdown(struct pci_dev *pdev) { - e100_suspend(pdev, PMSG_SUSPEND); + bool wake; + __e100_shutdown(pdev, &wake); + if (system_state == SYSTEM_POWER_OFF) + __e100_power_off(pdev, wake); } /* ------------------ PCI Error Recovery infrastructure -------------- */ -- cgit v0.10.2 From 7267fa6819467669f5cc2ba81a615dcc88158b4b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 29 Apr 2009 00:16:21 -0400 Subject: tracing: fix ref count in splice pages The pages allocated for the splice binary buffer did not initialize the ref count correctly. This caused pages not to be freed and causes a drastic memory leak. Thanks to logdev I was able to trace the tracer to find where the leak was. [ Impact: stop memory leak when using splice ] Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1ce5dc6..a884c09 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3448,6 +3448,7 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, if (!ref) break; + ref->ref = 1; ref->buffer = info->tr->buffer; ref->page = ring_buffer_alloc_read_page(ref->buffer); if (!ref->page) { -- cgit v0.10.2 From 33015c85995716d03f6293346cf05a1908b0fb9a Mon Sep 17 00:00:00 2001 From: Stuart Bennett Date: Tue, 28 Apr 2009 20:17:48 +0100 Subject: tracing: x86, mmiotrace: fix range test Matching on (addr == (p->addr + p->len)) causes problems when mappings are adjacent. [ Impact: fix mmiotrace confusion on adjacent iomaps ] Signed-off-by: Stuart Bennett Acked-by: Pekka Paalanen Cc: Steven Rostedt LKML-Reference: <1240946271-7083-2-git-send-email-stuart@freedesktop.org> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 4f115e0..50dc802 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -87,7 +87,7 @@ static struct kmmio_probe *get_kmmio_probe(unsigned long addr) { struct kmmio_probe *p; list_for_each_entry_rcu(p, &kmmio_probes, list) { - if (addr >= p->addr && addr <= (p->addr + p->len)) + if (addr >= p->addr && addr < (p->addr + p->len)) return p; } return NULL; -- cgit v0.10.2 From 2feaace40e5c3133fea795333402f30929a200d9 Mon Sep 17 00:00:00 2001 From: Ulrich Dangel Date: Tue, 28 Apr 2009 16:23:51 +0200 Subject: HID: Fix the support for apple mini aluminium keyboard Quirks for the apple mini keyboard was recently added but keyboard was recognized as a powerbook keyboard. Adjusted boundary to the lowest product id for the apple mini keyboard to get the right translation. Signed-off-by: Ulrich Dangel Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 7359d9d..acbce57 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -151,7 +151,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input, if (fnmode) { int do_translate; - trans = apple_find_translation((hid->product < 0x220 || + trans = apple_find_translation((hid->product < 0x21d || hid->product >= 0x300) ? powerbook_fn_keys : apple_fn_keys, usage->code); -- cgit v0.10.2 From f5f293a4e3d0a0c52cec31de6762c95050156516 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 Apr 2009 14:44:49 +0200 Subject: sched: account system time properly Andrew Gallatin reported that IRQ and SOFTIRQ times were sometime not reported correctly on recent kernels, and even bisected to commit 457533a7d3402d1d91fbc125c8bd1bd16dcd3cd4 ([PATCH] fix scaled & unscaled cputime accounting) as the first bad commit. Further analysis pointed that commit 79741dd35713ff4f6fd0eafd59fa94e8a4ba922d ([PATCH] idle cputime accounting) was the real cause of the problem. account_process_tick() was not taking into account timer IRQ interrupting the idle task servicing a hard or soft irq. On mostly idle cpu, irqs were thus not accounted and top or mpstat could tell user/admin that cpu was 100 % idle, 0.00 % irq, 0.00 % softirq, while it was not. [ Impact: fix occasionally incorrect CPU statistics in top/mpstat ] Reported-by: Andrew Gallatin Re-reported-by: Andrew Morton Signed-off-by: Eric Dumazet Acked-by: Martin Schwidefsky Cc: rick.jones2@hp.com Cc: brice@myri.com Cc: Paul Mackerras Cc: Benjamin Herrenschmidt LKML-Reference: <49F84BC1.7080602@cosmosbay.com> Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index b902e58..26efa47 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4732,7 +4732,7 @@ void account_process_tick(struct task_struct *p, int user_tick) if (user_tick) account_user_time(p, one_jiffy, one_jiffy_scaled); - else if (p != rq->idle) + else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET)) account_system_time(p, HARDIRQ_OFFSET, one_jiffy, one_jiffy_scaled); else -- cgit v0.10.2 From 89092ddd7aca598e3b8874f7a49216e7917d8f3f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 29 Apr 2009 17:12:12 +0200 Subject: HID: fix possible deadlock in usbhid_close() This patch switches usbhid_close() from flush_scheduled_work() to canceling the outstanding work. This fixes a possible deadlock due to work taking the mutex usbhid_close() holds. Lockdep reported the problem. Signed-off-by: Oliver Neukum -- Signed-off-by: Jiri Kosina diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 4306cb1..900ce18 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -662,8 +662,8 @@ void usbhid_close(struct hid_device *hid) spin_lock_irq(&usbhid->lock); if (!--hid->open) { spin_unlock_irq(&usbhid->lock); + hid_cancel_delayed_stuff(usbhid); usb_kill_urb(usbhid->urbin); - flush_scheduled_work(); usbhid->intf->needs_remote_wakeup = 0; } else { spin_unlock_irq(&usbhid->lock); -- cgit v0.10.2 From 7e31a966ad270ba32a77c157c015cd7c82faaa55 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 29 Apr 2009 01:20:55 +0800 Subject: ocfs2/trivial: Remove unused variable in ocfs2_rename. With indexed dir enabled, now we use ocfs2_dir_lookup_result to wrap all the bh used for dir. So remove the 2 unused variables. Signed-off-by: Tao Ma Signed-off-by: Joel Becker diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 2220f93..33464c6 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -1025,10 +1025,8 @@ static int ocfs2_rename(struct inode *old_dir, struct inode *orphan_dir = NULL; struct ocfs2_dinode *newfe = NULL; char orphan_name[OCFS2_ORPHAN_NAMELEN + 1]; - struct buffer_head *orphan_entry_bh = NULL; struct buffer_head *newfe_bh = NULL; struct buffer_head *old_inode_bh = NULL; - struct buffer_head *insert_entry_bh = NULL; struct ocfs2_super *osb = NULL; u64 newfe_blkno, old_de_ino; handle_t *handle = NULL; @@ -1455,8 +1453,6 @@ bail: brelse(old_inode_bh); brelse(old_dir_bh); brelse(new_dir_bh); - brelse(orphan_entry_bh); - brelse(insert_entry_bh); mlog_exit(status); -- cgit v0.10.2 From 92ab9baee3e075e4d84d9b74f6da5b047539e323 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Mon, 13 Apr 2009 21:43:31 -0300 Subject: V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers A late v4l2_subdev framework change accidentally sent the audio input routing value to the external multiplexer, instead of the muxer input routing value to the external multiplexer. This change corrects that error. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c index 1519e91..7a8ad59 100644 --- a/drivers/media/video/cx18/cx18-audio.c +++ b/drivers/media/video/cx18/cx18-audio.c @@ -44,7 +44,7 @@ int cx18_audio_set_io(struct cx18 *cx) /* handle muxer chips */ v4l2_subdev_call(cx->sd_extmux, audio, s_routing, - in->audio_input, 0, 0); + (u32) in->muxer_input, 0, 0); err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl, audio, s_routing, in->audio_input, 0, 0); -- cgit v0.10.2 From 3964b58a25fdca066011600bf58b38d00e9ae28d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Apr 2009 13:56:58 -0300 Subject: V4L/DVB (11494a): cx231xx Kconfig fixes selecting ALSA module breaks if !SND. Just remove select. While here, let's fix the whitespacing at the Kconfig. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig index 9115654..477d4ab 100644 --- a/drivers/media/video/cx231xx/Kconfig +++ b/drivers/media/video/cx231xx/Kconfig @@ -1,12 +1,11 @@ config VIDEO_CX231XX - tristate "Conexant cx231xx USB video capture support" - depends on VIDEO_DEV && I2C && INPUT - select VIDEO_TUNER - select VIDEO_TVEEPROM - select VIDEO_IR - select VIDEOBUF_VMALLOC - select VIDEO_CX25840 - select VIDEO_CX231XX_ALSA + tristate "Conexant cx231xx USB video capture support" + depends on VIDEO_DEV && I2C && INPUT + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_IR + select VIDEOBUF_VMALLOC + select VIDEO_CX25840 ---help--- This is a video4linux driver for Conexant 231xx USB based TV cards. @@ -15,21 +14,22 @@ config VIDEO_CX231XX module will be called cx231xx config VIDEO_CX231XX_ALSA - tristate "Conexant Cx231xx ALSA audio module" - depends on VIDEO_CX231XX && SND - select SND_PCM + tristate "Conexant Cx231xx ALSA audio module" + depends on VIDEO_CX231XX && SND + select SND_PCM - ---help--- - This is an ALSA driver for Cx231xx USB based TV cards. + ---help--- + This is an ALSA driver for Cx231xx USB based TV cards. - To compile this driver as a module, choose M here: the - module will be called cx231xx-alsa + To compile this driver as a module, choose M here: the + module will be called cx231xx-alsa config VIDEO_CX231XX_DVB - tristate "DVB/ATSC Support for Cx231xx based TV cards" - depends on VIDEO_CX231XX && DVB_CORE - select VIDEOBUF_DVB - select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE - ---help--- - This adds support for DVB cards based on the - Conexant cx231xx chips. + tristate "DVB/ATSC Support for Cx231xx based TV cards" + depends on VIDEO_CX231XX && DVB_CORE + select VIDEOBUF_DVB + select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE + + ---help--- + This adds support for DVB cards based on the + Conexant cx231xx chips. -- cgit v0.10.2 From 5b83cfa98569663b6fa6cda85a1f2fd371a082c7 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 14 Apr 2009 19:50:33 -0300 Subject: V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak I moved the kfree() down a couple lines. t->vdev is going to be in freed memory so there is no point setting it to NULL. I added a kfree(t) on a Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 48b27fe..271d6e9 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -598,6 +598,7 @@ static int saa5249_probe(struct i2c_client *client, /* Now create a video4linux device */ t->vdev = video_device_alloc(); if (t->vdev == NULL) { + kfree(t); kfree(client); return -ENOMEM; } @@ -617,9 +618,8 @@ static int saa5249_probe(struct i2c_client *client, /* Register it */ err = video_register_device(t->vdev, VFL_TYPE_VTX, -1); if (err < 0) { - kfree(t); video_device_release(t->vdev); - t->vdev = NULL; + kfree(t); return err; } return 0; -- cgit v0.10.2 From 9401608bb34be14960311dbb91d4a82ee07a03fa Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 14 Apr 2009 19:51:30 -0300 Subject: V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free I lowered the kfree(t) down a couple lines and removed the superflous "t->vdev = NULL;" Signed-off-by: Dan Carpenter Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index da47b2f..155804b 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -1092,9 +1092,8 @@ static int saa5246a_probe(struct i2c_client *client, /* Register it */ err = video_register_device(t->vdev, VFL_TYPE_VTX, -1); if (err < 0) { - kfree(t); video_device_release(t->vdev); - t->vdev = NULL; + kfree(t); return err; } return 0; -- cgit v0.10.2 From a357482a1e8fdd39f0a58c33ed2ffd0f1becb825 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 21 Apr 2009 04:22:38 -0300 Subject: V4L/DVB (11561a): move media after i2c Currently drivers/media drivers are linked very early - directly after base, block, misc, and mfd and before ata, scsi, ide, input, firewire, usb, and i2c. This breaks static build of video4linux drivers, that use generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because during video4linux probing the v4l2-subdev core requires a struct i2c_adapter context, which cannot be satisfied before the i2c subsystem is initialised. Moving drivers/media after drivers/i2c fixes this problem. The best way to trigger action is by submitting a patch:-) So, let's see what comes out of it - on the one hand I don't see any reason why media has to be linked this early, and nobody was able to give me one yesterday as this problem has been discussed on linux-media, OTOH, maybe indeed it would be better to move i2c the whole way up above media, but that'd be much bigger of a change, I think. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Guennadi Liakhovetski Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/Makefile b/drivers/Makefile index 2618a61..1266ead 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -36,7 +36,7 @@ obj-$(CONFIG_FB_INTEL) += video/intelfb/ obj-y += serial/ obj-$(CONFIG_PARPORT) += parport/ -obj-y += base/ block/ misc/ mfd/ media/ +obj-y += base/ block/ misc/ mfd/ obj-$(CONFIG_NUBUS) += nubus/ obj-y += macintosh/ obj-$(CONFIG_IDE) += ide/ @@ -71,7 +71,7 @@ obj-$(CONFIG_GAMEPORT) += input/gameport/ obj-$(CONFIG_INPUT) += input/ obj-$(CONFIG_I2O) += message/ obj-$(CONFIG_RTC_LIB) += rtc/ -obj-y += i2c/ +obj-y += i2c/ media/ obj-$(CONFIG_W1) += w1/ obj-$(CONFIG_POWER_SUPPLY) += power/ obj-$(CONFIG_HWMON) += hwmon/ -- cgit v0.10.2 From 272aa3966b3244e576c5c07bfff77ea320b89317 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 17 Apr 2009 10:56:51 -0300 Subject: V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error * Return actual error values as returned by the i2c subsystem, rather than 0 or 1. * If the registration of the second bus fails, unregister the first one before exiting, otherwise we are leaking resources. Signed-off-by: Jean Delvare Acked-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index b9b7064..8591e4f 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -211,7 +211,7 @@ static struct i2c_algo_bit_data cx18_i2c_algo_template = { /* init + register i2c algo-bit adapter */ int init_cx18_i2c(struct cx18 *cx) { - int i; + int i, err; CX18_DEBUG_I2C("i2c init\n"); for (i = 0; i < 2; i++) { @@ -268,8 +268,18 @@ int init_cx18_i2c(struct cx18 *cx) cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL, core, reset, (u32) CX18_GPIO_RESET_I2C); - return i2c_bit_add_bus(&cx->i2c_adap[0]) || - i2c_bit_add_bus(&cx->i2c_adap[1]); + err = i2c_bit_add_bus(&cx->i2c_adap[0]); + if (err) + goto err; + err = i2c_bit_add_bus(&cx->i2c_adap[1]); + if (err) + goto err_del_bus_0; + return 0; + + err_del_bus_0: + i2c_del_adapter(&cx->i2c_adap[0]); + err: + return err; } void exit_cx18_i2c(struct cx18 *cx) -- cgit v0.10.2 From 9d63cec16829ac3600c5014d207a659df3b93c9a Mon Sep 17 00:00:00 2001 From: Dean Anderson Date: Mon, 20 Apr 2009 19:07:44 -0300 Subject: V4L/DVB (11570): patch: s2255drv: fix race condition on set mode set_modeready flag must be set before command sent to USB in s2255_write_config. Signed-off-by: Dean Anderson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 5202cad..30f4698 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -1237,6 +1237,7 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, buffer[1] = (u32) chn_rev; buffer[2] = CMD_SET_MODE; memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode)); + dev->setmode_ready[chn] = 0; res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); if (debug) dump_verify_mode(dev, mode); @@ -1245,7 +1246,6 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, /* wait at least 3 frames before continuing */ if (mode->restart) { - dev->setmode_ready[chn] = 0; wait_event_timeout(dev->wait_setmode[chn], (dev->setmode_ready[chn] != 0), msecs_to_jiffies(S2255_SETMODE_TIMEOUT)); -- cgit v0.10.2 From e39c9047975f4302354c16c33eecfe59946d3fc4 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 24 Apr 2009 12:58:24 -0300 Subject: V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM Signed-off-by: Sascha Hauer Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index c462b81..2d07811 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -1063,10 +1063,6 @@ static struct soc_camera_host_ops mx3_soc_camera_host_ops = { .owner = THIS_MODULE, .add = mx3_camera_add_device, .remove = mx3_camera_remove_device, -#ifdef CONFIG_PM - .suspend = mx3_camera_suspend, - .resume = mx3_camera_resume, -#endif .set_crop = mx3_camera_set_crop, .set_fmt = mx3_camera_set_fmt, .try_fmt = mx3_camera_try_fmt, -- cgit v0.10.2 From d4dc673da9a94716ca2410306c1b36b5faf6c4cc Mon Sep 17 00:00:00 2001 From: Christopher Pascoe Date: Mon, 27 Apr 2009 11:27:04 -0300 Subject: V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express Two fixes for DViCO FusionHDTV DVB-T Dual Express: * Reset correct tuner when reinitializing xc3028. * Disable the I2C gate control to avoid locking up the I2C bus. Tested-by: John Knops Reviewed-by: Steven Toth Signed-off-by: Christopher Pascoe Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index a3c0565..6d6293f 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -441,9 +441,9 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: /* Two identical tuners on two different i2c buses, * we need to reset the correct gpio. */ - if (port->nr == 0) + if (port->nr == 1) bitmask = 0x01; - else if (port->nr == 1) + else if (port->nr == 2) bitmask = 0x04; break; } diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index f48454a..0c49a98 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -314,6 +314,7 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = { .demod_address = 0x0f, .if2 = 45600, .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, }; static struct stv0900_config netup_stv0900_config = { -- cgit v0.10.2 From fe78a49c8ae009d33d6e2c80d4f7f2634440d523 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 28 Apr 2009 13:14:07 -0300 Subject: V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect. A regression was introduced in hg changeset 33810c734a0d, which resulted in a kernel panic whenever the device was disconnected from USB. The call to 4l2_device_register() was overwriting the pointer for usb_set_intfdata(), so when au0828_usb_disconnect() was called, the usb_get_intfdata() returned a pointer to the v4l2_device instead of the au0828_dev structure. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c index 4cee0b9..a1e4c0d 100644 --- a/drivers/media/video/au0828/au0828-core.c +++ b/drivers/media/video/au0828/au0828-core.c @@ -192,8 +192,6 @@ static int au0828_usb_probe(struct usb_interface *interface, dev->usbdev = usbdev; dev->boardnr = id->driver_info; - usb_set_intfdata(interface, dev); - /* Create the v4l2_device */ retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev); if (retval) { @@ -222,6 +220,10 @@ static int au0828_usb_probe(struct usb_interface *interface, /* Digital TV */ au0828_dvb_register(dev); + /* Store the pointer to the au0828_dev so it can be accessed in + au0828_usb_disconnect */ + usb_set_intfdata(interface, dev); + printk(KERN_INFO "Registered device AU0828 [%s]\n", dev->board.name == NULL ? "Unset" : dev->board.name); -- cgit v0.10.2 From d4c4a9a1bce1912ed5681251f0037fd4f2364a3e Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Wed, 29 Apr 2009 11:41:24 +0100 Subject: mac80211: fix modprobe deadlock by not calling wep_init under rtnl_lock - ieee80211_wep_init(), which is called with rtnl_lock held, blocks in request_module() [waiting for modprobe to load a crypto module]. - modprobe blocks in a call to flush_workqueue(), when it closes a TTY [presumably when it exits]. - The workqueue item linkwatch_event() blocks on rtnl_lock. There's no reason for wep_init() to be called with rtnl_lock held, so just move it outside the critical section. Signed-off-by: Alan Jenkins Signed-off-by: John W. Linville diff --git a/net/mac80211/main.c b/net/mac80211/main.c index fbcbed6..00968c2 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -909,6 +909,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (result < 0) goto fail_sta_info; + result = ieee80211_wep_init(local); + if (result < 0) { + printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", + wiphy_name(local->hw.wiphy), result); + goto fail_wep; + } + rtnl_lock(); result = dev_alloc_name(local->mdev, local->mdev->name); if (result < 0) @@ -930,14 +937,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) goto fail_rate; } - result = ieee80211_wep_init(local); - - if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", - wiphy_name(local->hw.wiphy), result); - goto fail_wep; - } - /* add one default STA interface if supported */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) { result = ieee80211_if_add(local, "wlan%d", NULL, @@ -967,13 +966,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) return 0; -fail_wep: - rate_control_deinitialize(local); fail_rate: unregister_netdevice(local->mdev); local->mdev = NULL; fail_dev: rtnl_unlock(); + ieee80211_wep_free(local); +fail_wep: sta_info_stop(local); fail_sta_info: debugfs_hw_del(local); -- cgit v0.10.2 From c428c89201a57a0ce24c37ed79e540d1f4101cf3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 29 Apr 2009 00:28:18 +0200 Subject: mac80211: default to automatic power control In "mac80211: correct wext transmit power handler" I fixed the wext handler, but forgot to make the default of the user_power_level -1 (aka "auto"), so that now the transmit power is always set to 0, causing associations to time out and similar problems since we're transmitting with very little power. Correct this by correcting the default user_power_level to -1. Signed-off-by: Johannes Berg Bisected-by: Niel Lambrechts Signed-off-by: John W. Linville diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 00968c2..1413419 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -757,6 +757,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->hw.conf.long_frame_max_tx_count = 4; local->hw.conf.short_frame_max_tx_count = 7; local->hw.conf.radio_enabled = true; + local->user_power_level = -1; INIT_LIST_HEAD(&local->interfaces); mutex_init(&local->iflist_mtx); -- cgit v0.10.2 From 1319ebadf185933e6b7ff95211d3cef9004e9754 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 29 Apr 2009 11:57:34 +0000 Subject: mv643xx_eth: OOM handling fixes Currently, when OOM occurs during rx ring refill, mv643xx_eth will get into an infinite loop, due to the refill function setting the OOM bit but not clearing the 'rx refill needed' bit for this queue, while the calling function (the NAPI poll handler) will call the refill function in a loop until the 'rx refill needed' bit goes off, without checking the OOM bit. This patch fixes this by checking the OOM bit in the NAPI poll handler before attempting to do rx refill. This means that once OOM occurs, we won't try to do any memory allocations again until the next invocation of the poll handler. While we're at it, change the OOM flag to be a single bit instead of one bit per receive queue since OOM is a system state rather than a per-queue state, and cancel the OOM timer on entry to the NAPI poll handler if it's running to prevent it from firing when we've already come out of OOM. Signed-off-by: Lennert Buytenhek Cc: stable@kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b3185bf..038beff 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -393,12 +393,12 @@ struct mv643xx_eth_private { struct work_struct tx_timeout_task; struct napi_struct napi; + u8 oom; u8 work_link; u8 work_tx; u8 work_tx_end; u8 work_rx; u8 work_rx_refill; - u8 work_rx_oom; int skb_size; struct sk_buff_head rx_recycle; @@ -661,7 +661,7 @@ static int rxq_refill(struct rx_queue *rxq, int budget) dma_get_cache_alignment() - 1); if (skb == NULL) { - mp->work_rx_oom |= 1 << rxq->index; + mp->oom = 1; goto oom; } @@ -2167,8 +2167,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) mp = container_of(napi, struct mv643xx_eth_private, napi); - mp->work_rx_refill |= mp->work_rx_oom; - mp->work_rx_oom = 0; + if (unlikely(mp->oom)) { + mp->oom = 0; + del_timer(&mp->rx_oom); + } work_done = 0; while (work_done < budget) { @@ -2182,8 +2184,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) continue; } - queue_mask = mp->work_tx | mp->work_tx_end | - mp->work_rx | mp->work_rx_refill; + queue_mask = mp->work_tx | mp->work_tx_end | mp->work_rx; + if (likely(!mp->oom)) + queue_mask |= mp->work_rx_refill; + if (!queue_mask) { if (mv643xx_eth_collect_events(mp)) continue; @@ -2204,7 +2208,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) txq_maybe_wake(mp->txq + queue); } else if (mp->work_rx & queue_mask) { work_done += rxq_process(mp->rxq + queue, work_tbd); - } else if (mp->work_rx_refill & queue_mask) { + } else if (!mp->oom && (mp->work_rx_refill & queue_mask)) { work_done += rxq_refill(mp->rxq + queue, work_tbd); } else { BUG(); @@ -2212,7 +2216,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) } if (work_done < budget) { - if (mp->work_rx_oom) + if (mp->oom) mod_timer(&mp->rx_oom, jiffies + (HZ / 10)); napi_complete(napi); wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT); @@ -2372,7 +2376,7 @@ static int mv643xx_eth_open(struct net_device *dev) rxq_refill(mp->rxq + i, INT_MAX); } - if (mp->work_rx_oom) { + if (mp->oom) { mp->rx_oom.expires = jiffies + (HZ / 10); add_timer(&mp->rx_oom); } -- cgit v0.10.2 From 93af7aca44f0e82e67bda10a0fb73d383edcc8bd Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 29 Apr 2009 11:58:18 +0000 Subject: mv643xx_eth: 64bit mib counter read fix On several mv643xx_eth hardware versions, the two 64bit mib counters for 'good octets received' and 'good octets sent' are actually 32bit counters, and reading from the upper half of the register has the same effect as reading from the lower half of the register: an atomic read-and-clear of the entire 32bit counter value. This can under heavy traffic occasionally lead to small numbers being added to the upper half of the 64bit mib counter even though no 32bit wrap has occured. Since we poll the mib counters at least every 30 seconds anyway, we might as well just skip the reads of the upper halves of the hardware counters without breaking the stats, which this patch does. Signed-off-by: Lennert Buytenhek Cc: stable@kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 038beff..a400d71 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1255,7 +1255,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) spin_lock_bh(&mp->mib_counters_lock); p->good_octets_received += mib_read(mp, 0x00); - p->good_octets_received += (u64)mib_read(mp, 0x04) << 32; p->bad_octets_received += mib_read(mp, 0x08); p->internal_mac_transmit_err += mib_read(mp, 0x0c); p->good_frames_received += mib_read(mp, 0x10); @@ -1269,7 +1268,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) p->frames_512_to_1023_octets += mib_read(mp, 0x30); p->frames_1024_to_max_octets += mib_read(mp, 0x34); p->good_octets_sent += mib_read(mp, 0x38); - p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32; p->good_frames_sent += mib_read(mp, 0x40); p->excessive_collision += mib_read(mp, 0x44); p->multicast_frames_sent += mib_read(mp, 0x48); -- cgit v0.10.2 From 091438dd5668396328a3419abcbc6591159eb8d1 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 29 Apr 2009 21:48:16 -0700 Subject: Linux 2.6.30-rc4 diff --git a/Makefile b/Makefile index 9e5dc8f..eb38c83 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc3 -NAME = Temporary Tasmanian Devil +EXTRAVERSION = -rc4 +NAME = Vindictive Armadillo # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v0.10.2 From def6b3ba56b637d58126ef67fc19bab57945fcc4 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Thu, 23 Apr 2009 22:18:00 -0400 Subject: xfs_file_last_byte() needs to acquire ilock We had some systems crash with this stack: [] ia64_leave_kernel+0x0/0x280 [] xfs_bmbt_get_startoff+0x0/0x20 [xfs] [] xfs_bmap_last_offset+0x210/0x280 [xfs] [] xfs_file_last_byte+0x70/0x1a0 [xfs] [] xfs_itruncate_start+0xc0/0x1a0 [xfs] [] xfs_inactive_free_eofblocks+0x290/0x460 [xfs] [] xfs_release+0x1b0/0x240 [xfs] [] xfs_file_release+0x70/0xa0 [xfs] [] __fput+0x1a0/0x420 [] fput+0x40/0x60 The problem here is that xfs_file_last_byte() does not acquire the inode lock and can therefore race with another thread that is modifying the extext list. While xfs_bmap_last_offset() is trying to lookup what was the last extent some extents were merged and the extent list shrunk so the index we lookup is now beyond the end of the extent list and potentially in a freed buffer. Signed-off-by: Lachlan McIlroy Reviewed-by: Christoph Hellwig Reviewed-by: Felix Blyakher Signed-off-by: Felix Blyakher diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index e7ae08d..123b20c 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1258,8 +1258,10 @@ xfs_file_last_byte( * necessary. */ if (ip->i_df.if_flags & XFS_IFEXTENTS) { + xfs_ilock(ip, XFS_ILOCK_SHARED); error = xfs_bmap_last_offset(NULL, ip, &last_block, XFS_DATA_FORK); + xfs_iunlock(ip, XFS_ILOCK_SHARED); if (error) { last_block = 0; } -- cgit v0.10.2 From b9ec9068d79e039507a247ebc5bc9c0ce53654ce Mon Sep 17 00:00:00 2001 From: Olaf Weber Date: Fri, 17 Apr 2009 16:12:45 -0500 Subject: xfs: add more checks to superblock validation There had been reports where xfs filesystem was randomly corrupted with fsfuzzer, and xfs failed to handle it gracefully. This patch fixes couple of reported problem by providing additional checks in the superblock validation routine. Signed-off-by: Olaf Weber Reviewed-by: Josef 'Jeff' Sipek Reviewed-by: Christoph Hellwig Signed-off-by: Felix Blyakher diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index b101990..65a9972 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -291,14 +291,17 @@ xfs_mount_validate_sb( sbp->sb_sectsize > XFS_MAX_SECTORSIZE || sbp->sb_sectlog < XFS_MIN_SECTORSIZE_LOG || sbp->sb_sectlog > XFS_MAX_SECTORSIZE_LOG || + sbp->sb_sectsize != (1 << sbp->sb_sectlog) || sbp->sb_blocksize < XFS_MIN_BLOCKSIZE || sbp->sb_blocksize > XFS_MAX_BLOCKSIZE || sbp->sb_blocklog < XFS_MIN_BLOCKSIZE_LOG || sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG || + sbp->sb_blocksize != (1 << sbp->sb_blocklog) || sbp->sb_inodesize < XFS_DINODE_MIN_SIZE || sbp->sb_inodesize > XFS_DINODE_MAX_SIZE || sbp->sb_inodelog < XFS_DINODE_MIN_LOG || sbp->sb_inodelog > XFS_DINODE_MAX_LOG || + sbp->sb_inodesize != (1 << sbp->sb_inodelog) || (sbp->sb_blocklog - sbp->sb_inodelog != sbp->sb_inopblog) || (sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE) || (sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE) || -- cgit v0.10.2 From 5f79ed685fc6122018c4b5826e2e5bdb7bc6f109 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 29 Apr 2009 10:50:48 -0400 Subject: xfs: a couple getbmap cleanups - reshuffle various conditionals for data vs attr fork to make the code more readable - do fine-grainded goto-based error handling - exit early from conditionals instead of keeping a long else branch around - allow kmem_alloc to fail Signed-off-by: Christoph Hellwig Reviewed-by: Eric Sandeen Reviewed-by: Felix Blyakher Signed-off-by: Felix Blyakher diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 3a6ed42..abe4244 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -5880,7 +5880,7 @@ xfs_getbmap( void *arg) /* formatter arg */ { __int64_t bmvend; /* last block requested */ - int error; /* return value */ + int error = 0; /* return value */ __int64_t fixlen; /* length for -1 case */ int i; /* extent number */ int lock; /* lock state */ @@ -5899,30 +5899,8 @@ xfs_getbmap( mp = ip->i_mount; iflags = bmv->bmv_iflags; - whichfork = iflags & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK; - /* If the BMV_IF_NO_DMAPI_READ interface bit specified, do not - * generate a DMAPI read event. Otherwise, if the DM_EVENT_READ - * bit is set for the file, generate a read event in order - * that the DMAPI application may do its thing before we return - * the extents. Usually this means restoring user file data to - * regions of the file that look like holes. - * - * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify - * BMV_IF_NO_DMAPI_READ so that read events are generated. - * If this were not true, callers of ioctl( XFS_IOC_GETBMAP ) - * could misinterpret holes in a DMAPI file as true holes, - * when in fact they may represent offline user data. - */ - if ((iflags & BMV_IF_NO_DMAPI_READ) == 0 && - DM_EVENT_ENABLED(ip, DM_EVENT_READ) && - whichfork == XFS_DATA_FORK) { - error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL); - if (error) - return XFS_ERROR(error); - } - if (whichfork == XFS_ATTR_FORK) { if (XFS_IFORK_Q(ip)) { if (ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS && @@ -5936,11 +5914,37 @@ xfs_getbmap( ip->i_mount); return XFS_ERROR(EFSCORRUPTED); } - } else if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS && - ip->i_d.di_format != XFS_DINODE_FMT_BTREE && - ip->i_d.di_format != XFS_DINODE_FMT_LOCAL) - return XFS_ERROR(EINVAL); - if (whichfork == XFS_DATA_FORK) { + + prealloced = 0; + fixlen = 1LL << 32; + } else { + /* + * If the BMV_IF_NO_DMAPI_READ interface bit specified, do + * not generate a DMAPI read event. Otherwise, if the + * DM_EVENT_READ bit is set for the file, generate a read + * event in order that the DMAPI application may do its thing + * before we return the extents. Usually this means restoring + * user file data to regions of the file that look like holes. + * + * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify + * BMV_IF_NO_DMAPI_READ so that read events are generated. + * If this were not true, callers of ioctl(XFS_IOC_GETBMAP) + * could misinterpret holes in a DMAPI file as true holes, + * when in fact they may represent offline user data. + */ + if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) && + !(iflags & BMV_IF_NO_DMAPI_READ)) { + error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, + 0, 0, 0, NULL); + if (error) + return XFS_ERROR(error); + } + + if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS && + ip->i_d.di_format != XFS_DINODE_FMT_BTREE && + ip->i_d.di_format != XFS_DINODE_FMT_LOCAL) + return XFS_ERROR(EINVAL); + if (xfs_get_extsz_hint(ip) || ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC|XFS_DIFLAG_APPEND)){ prealloced = 1; @@ -5949,42 +5953,34 @@ xfs_getbmap( prealloced = 0; fixlen = ip->i_size; } - } else { - prealloced = 0; - fixlen = 1LL << 32; } if (bmv->bmv_length == -1) { fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, fixlen)); - bmv->bmv_length = MAX( (__int64_t)(fixlen - bmv->bmv_offset), - (__int64_t)0); - } else if (bmv->bmv_length < 0) - return XFS_ERROR(EINVAL); - if (bmv->bmv_length == 0) { + bmv->bmv_length = + max_t(__int64_t, fixlen - bmv->bmv_offset, 0); + } else if (bmv->bmv_length == 0) { bmv->bmv_entries = 0; return 0; + } else if (bmv->bmv_length < 0) { + return XFS_ERROR(EINVAL); } + nex = bmv->bmv_count - 1; if (nex <= 0) return XFS_ERROR(EINVAL); bmvend = bmv->bmv_offset + bmv->bmv_length; xfs_ilock(ip, XFS_IOLOCK_SHARED); - - if (((iflags & BMV_IF_DELALLOC) == 0) && - (whichfork == XFS_DATA_FORK) && - (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size)) { - /* xfs_fsize_t last_byte = xfs_file_last_byte(ip); */ - error = xfs_flush_pages(ip, (xfs_off_t)0, - -1, 0, FI_REMAPF); - if (error) { - xfs_iunlock(ip, XFS_IOLOCK_SHARED); - return error; + if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) { + if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) { + error = xfs_flush_pages(ip, 0, -1, 0, FI_REMAPF); + if (error) + goto out_unlock_iolock; } - } - ASSERT(whichfork == XFS_ATTR_FORK || (iflags & BMV_IF_DELALLOC) || - ip->i_delayed_blks == 0); + ASSERT(ip->i_delayed_blks == 0); + } lock = xfs_ilock_map_shared(ip); @@ -5995,23 +5991,25 @@ xfs_getbmap( if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1) nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1; - bmapi_flags = xfs_bmapi_aflag(whichfork) | - ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE); + bmapi_flags = xfs_bmapi_aflag(whichfork); + if (!(iflags & BMV_IF_PREALLOC)) + bmapi_flags |= XFS_BMAPI_IGSTATE; /* * Allocate enough space to handle "subnex" maps at a time. */ + error = ENOMEM; subnex = 16; - map = kmem_alloc(subnex * sizeof(*map), KM_SLEEP); + map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL); + if (!map) + goto out_unlock_ilock; bmv->bmv_entries = 0; - if ((XFS_IFORK_NEXTENTS(ip, whichfork) == 0)) { - if (((iflags & BMV_IF_DELALLOC) == 0) || - whichfork == XFS_ATTR_FORK) { - error = 0; - goto unlock_and_return; - } + if (XFS_IFORK_NEXTENTS(ip, whichfork) == 0 && + (whichfork == XFS_ATTR_FORK || !(iflags & BMV_IF_DELALLOC))) { + error = 0; + goto out_free_map; } nexleft = nex; @@ -6023,10 +6021,12 @@ xfs_getbmap( bmapi_flags, NULL, 0, map, &nmap, NULL, NULL); if (error) - goto unlock_and_return; + goto out_free_map; ASSERT(nmap <= subnex); for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) { + int full = 0; /* user array is full */ + out.bmv_oflags = 0; if (map[i].br_state == XFS_EXT_UNWRITTEN) out.bmv_oflags |= BMV_OF_PREALLOC; @@ -6041,36 +6041,32 @@ xfs_getbmap( whichfork == XFS_ATTR_FORK) { /* came to the end of attribute fork */ out.bmv_oflags |= BMV_OF_LAST; - goto unlock_and_return; - } else { - int full = 0; /* user array is full */ - - if (!xfs_getbmapx_fix_eof_hole(ip, &out, - prealloced, bmvend, - map[i].br_startblock)) { - goto unlock_and_return; - } - - /* format results & advance arg */ - error = formatter(&arg, &out, &full); - if (error || full) - goto unlock_and_return; - nexleft--; - bmv->bmv_offset = - out.bmv_offset + out.bmv_length; - bmv->bmv_length = MAX((__int64_t)0, - (__int64_t)(bmvend - bmv->bmv_offset)); - bmv->bmv_entries++; + goto out_free_map; } + + if (!xfs_getbmapx_fix_eof_hole(ip, &out, prealloced, + bmvend, map[i].br_startblock)) + goto out_free_map; + + /* format results & advance arg */ + error = formatter(&arg, &out, &full); + if (error || full) + goto out_free_map; + nexleft--; + bmv->bmv_offset = + out.bmv_offset + out.bmv_length; + bmv->bmv_length = + max_t(__int64_t, 0, bmvend - bmv->bmv_offset); + bmv->bmv_entries++; } } while (nmap && nexleft && bmv->bmv_length); -unlock_and_return: + out_free_map: + kmem_free(map); + out_unlock_ilock: xfs_iunlock_map_shared(ip, lock); + out_unlock_iolock: xfs_iunlock(ip, XFS_IOLOCK_SHARED); - - kmem_free(map); - return error; } -- cgit v0.10.2 From 28e211700a81b0a934b6c7a4b8e7dda843634d2f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 24 Feb 2009 08:39:02 -0500 Subject: xfs: fix getbmap vs mmap deadlock xfs_getbmap (or rather the formatters called by it) copy out the getbmap structures under the ilock, which can deadlock against mmap. This has been reported via bugzilla a while ago (#717) and has recently also shown up via lockdep. So allocate a temporary buffer to format the kernel getbmap structures into and then copy them out after dropping the locks. A little problem with this is that we limit the number of extents we can copy out by the maximum allocation size, but I see no real way around that. Signed-off-by: Christoph Hellwig Reviewed-by: Eric Sandeen Reviewed-by: Felix Blyakher Signed-off-by: Felix Blyakher diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index abe4244..ca7c600 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -5890,12 +5890,13 @@ xfs_getbmap( int nexleft; /* # of user extents left */ int subnex; /* # of bmapi's can do */ int nmap; /* number of map entries */ - struct getbmapx out; /* output structure */ + struct getbmapx *out; /* output structure */ int whichfork; /* data or attr fork */ int prealloced; /* this is a file with * preallocated data space */ int iflags; /* interface flags */ int bmapi_flags; /* flags for xfs_bmapi */ + int cur_ext = 0; mp = ip->i_mount; iflags = bmv->bmv_iflags; @@ -5971,6 +5972,13 @@ xfs_getbmap( return XFS_ERROR(EINVAL); bmvend = bmv->bmv_offset + bmv->bmv_length; + + if (bmv->bmv_count > ULONG_MAX / sizeof(struct getbmapx)) + return XFS_ERROR(ENOMEM); + out = kmem_zalloc(bmv->bmv_count * sizeof(struct getbmapx), KM_MAYFAIL); + if (!out) + return XFS_ERROR(ENOMEM); + xfs_ilock(ip, XFS_IOLOCK_SHARED); if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) { if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) { @@ -6025,39 +6033,39 @@ xfs_getbmap( ASSERT(nmap <= subnex); for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) { - int full = 0; /* user array is full */ - - out.bmv_oflags = 0; + out[cur_ext].bmv_oflags = 0; if (map[i].br_state == XFS_EXT_UNWRITTEN) - out.bmv_oflags |= BMV_OF_PREALLOC; + out[cur_ext].bmv_oflags |= BMV_OF_PREALLOC; else if (map[i].br_startblock == DELAYSTARTBLOCK) - out.bmv_oflags |= BMV_OF_DELALLOC; - out.bmv_offset = XFS_FSB_TO_BB(mp, map[i].br_startoff); - out.bmv_length = XFS_FSB_TO_BB(mp, map[i].br_blockcount); - out.bmv_unused1 = out.bmv_unused2 = 0; + out[cur_ext].bmv_oflags |= BMV_OF_DELALLOC; + out[cur_ext].bmv_offset = + XFS_FSB_TO_BB(mp, map[i].br_startoff); + out[cur_ext].bmv_length = + XFS_FSB_TO_BB(mp, map[i].br_blockcount); + out[cur_ext].bmv_unused1 = 0; + out[cur_ext].bmv_unused2 = 0; ASSERT(((iflags & BMV_IF_DELALLOC) != 0) || (map[i].br_startblock != DELAYSTARTBLOCK)); if (map[i].br_startblock == HOLESTARTBLOCK && whichfork == XFS_ATTR_FORK) { /* came to the end of attribute fork */ - out.bmv_oflags |= BMV_OF_LAST; + out[cur_ext].bmv_oflags |= BMV_OF_LAST; goto out_free_map; } - if (!xfs_getbmapx_fix_eof_hole(ip, &out, prealloced, - bmvend, map[i].br_startblock)) + if (!xfs_getbmapx_fix_eof_hole(ip, &out[cur_ext], + prealloced, bmvend, + map[i].br_startblock)) goto out_free_map; - /* format results & advance arg */ - error = formatter(&arg, &out, &full); - if (error || full) - goto out_free_map; nexleft--; bmv->bmv_offset = - out.bmv_offset + out.bmv_length; + out[cur_ext].bmv_offset + + out[cur_ext].bmv_length; bmv->bmv_length = max_t(__int64_t, 0, bmvend - bmv->bmv_offset); bmv->bmv_entries++; + cur_ext++; } } while (nmap && nexleft && bmv->bmv_length); @@ -6067,6 +6075,16 @@ xfs_getbmap( xfs_iunlock_map_shared(ip, lock); out_unlock_iolock: xfs_iunlock(ip, XFS_IOLOCK_SHARED); + + for (i = 0; i < cur_ext; i++) { + int full = 0; /* user array is full */ + + /* format results & advance arg */ + error = formatter(&arg, &out[i], &full); + if (error || full) + break; + } + return error; } -- cgit v0.10.2 From 6e85c5ba73c07b990798087e9b858c065db2b234 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 29 Apr 2009 19:14:32 -0400 Subject: kernel/posix-cpu-timers.c: fix sparse warning Sparse reports the following in kernel/posix-cpu-timers.c: warning: symbol 'firing' shadows an earlier one Signed-off-by: H Hartley Sweeten Cc: Subrata Modak LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index c9dcf98..bece7c0 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1420,19 +1420,19 @@ void run_posix_cpu_timers(struct task_struct *tsk) * timer call will interfere. */ list_for_each_entry_safe(timer, next, &firing, it.cpu.entry) { - int firing; + int cpu_firing; + spin_lock(&timer->it_lock); list_del_init(&timer->it.cpu.entry); - firing = timer->it.cpu.firing; + cpu_firing = timer->it.cpu.firing; timer->it.cpu.firing = 0; /* * The firing flag is -1 if we collided with a reset * of the timer, which already reported this * almost-firing as an overrun. So don't generate an event. */ - if (likely(firing >= 0)) { + if (likely(cpu_firing >= 0)) cpu_timer_fire(timer); - } spin_unlock(&timer->it_lock); } } -- cgit v0.10.2 From 2f65dd475c6a8a997145ea83cc3d2d5e6dc55af1 Mon Sep 17 00:00:00 2001 From: John Wright Date: Wed, 29 Apr 2009 14:32:01 -0600 Subject: x86: gettimeofday() vDSO: fix segfault when tv == NULL According to the gettimeofday(2) manual: If either tv or tz is NULL, the corresponding structure is not set or returned. Since it is legal to give NULL as the tv argument, the code should make sure tv is not NULL before trying to dereference it. This issue manifests itself on x86_64 when vdso=0 is not on the kernel command-line and libc uses the vDSO for gettimeofday() (e.g. glibc >= 2.7). A simple reproducer: #include #include int main(void) { struct timezone tz; gettimeofday(NULL, &tz); return 0; } See http://bugs.debian.org/466491 for more details. [ Impact: fix gettimeofday(NULL, &tz) segfault ] Signed-off-by: John Wright Cc: Andi Kleen Cc: John Wright LKML-Reference: <1241037121-14805-1-git-send-email-john.wright@hp.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index d9d3582..6a40b78 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -104,11 +104,13 @@ notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) { long ret; if (likely(gtod->sysctl_enabled && gtod->clock.vread)) { - BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != - offsetof(struct timespec, tv_nsec) || - sizeof(*tv) != sizeof(struct timespec)); - do_realtime((struct timespec *)tv); - tv->tv_usec /= 1000; + if (likely(tv != NULL)) { + BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != + offsetof(struct timespec, tv_nsec) || + sizeof(*tv) != sizeof(struct timespec)); + do_realtime((struct timespec *)tv); + tv->tv_usec /= 1000; + } if (unlikely(tz != NULL)) { /* Avoid memcpy. Some old compilers fail to inline it */ tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest; -- cgit v0.10.2 From 7a67e56fd362d3edfde1f19170893508c3940d3a Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Thu, 30 Apr 2009 05:41:19 -0700 Subject: net: Fix oops when splicing skbs from a frag_list. Lennert Buytenhek wrote: > Since 4fb669948116d928ae44262ab7743732c574630d ("net: Optimize memory > usage when splicing from sockets.") I'm seeing this oops (e.g. in > 2.6.30-rc3) when splicing from a TCP socket to /dev/null on a driver > (mv643xx_eth) that uses LRO in the skb mode (lro_receive_skb) rather > than the frag mode: My patch incorrectly assumed skb->sk was always valid, but for "frag_listed" skbs we can only use skb->sk of their parent. Reported-by: Lennert Buytenhek Debugged-by: Lennert Buytenhek Tested-by: Lennert Buytenhek Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index ce6356c..f091a5a 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1365,9 +1365,8 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) static inline struct page *linear_to_page(struct page *page, unsigned int *len, unsigned int *offset, - struct sk_buff *skb) + struct sk_buff *skb, struct sock *sk) { - struct sock *sk = skb->sk; struct page *p = sk->sk_sndmsg_page; unsigned int off; @@ -1405,13 +1404,14 @@ new_page: */ static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page, unsigned int *len, unsigned int offset, - struct sk_buff *skb, int linear) + struct sk_buff *skb, int linear, + struct sock *sk) { if (unlikely(spd->nr_pages == PIPE_BUFFERS)) return 1; if (linear) { - page = linear_to_page(page, len, &offset, skb); + page = linear_to_page(page, len, &offset, skb, sk); if (!page) return 1; } else @@ -1442,7 +1442,8 @@ static inline void __segment_seek(struct page **page, unsigned int *poff, static inline int __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, unsigned int *len, struct sk_buff *skb, - struct splice_pipe_desc *spd, int linear) + struct splice_pipe_desc *spd, int linear, + struct sock *sk) { if (!*len) return 1; @@ -1465,7 +1466,7 @@ static inline int __splice_segment(struct page *page, unsigned int poff, /* the linear region may spread across several pages */ flen = min_t(unsigned int, flen, PAGE_SIZE - poff); - if (spd_fill_page(spd, page, &flen, poff, skb, linear)) + if (spd_fill_page(spd, page, &flen, poff, skb, linear, sk)) return 1; __segment_seek(&page, &poff, &plen, flen); @@ -1481,8 +1482,8 @@ static inline int __splice_segment(struct page *page, unsigned int poff, * pipe is full or if we already spliced the requested length. */ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, - unsigned int *len, - struct splice_pipe_desc *spd) + unsigned int *len, struct splice_pipe_desc *spd, + struct sock *sk) { int seg; @@ -1492,7 +1493,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, if (__splice_segment(virt_to_page(skb->data), (unsigned long) skb->data & (PAGE_SIZE - 1), skb_headlen(skb), - offset, len, skb, spd, 1)) + offset, len, skb, spd, 1, sk)) return 1; /* @@ -1502,7 +1503,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, const skb_frag_t *f = &skb_shinfo(skb)->frags[seg]; if (__splice_segment(f->page, f->page_offset, f->size, - offset, len, skb, spd, 0)) + offset, len, skb, spd, 0, sk)) return 1; } @@ -1528,12 +1529,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset, .ops = &sock_pipe_buf_ops, .spd_release = sock_spd_release, }; + struct sock *sk = skb->sk; /* * __skb_splice_bits() only fails if the output has no room left, * so no point in going over the frag_list for the error case. */ - if (__skb_splice_bits(skb, &offset, &tlen, &spd)) + if (__skb_splice_bits(skb, &offset, &tlen, &spd, sk)) goto done; else if (!tlen) goto done; @@ -1545,14 +1547,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset, struct sk_buff *list = skb_shinfo(skb)->frag_list; for (; list && tlen; list = list->next) { - if (__skb_splice_bits(list, &offset, &tlen, &spd)) + if (__skb_splice_bits(list, &offset, &tlen, &spd, sk)) break; } } done: if (spd.nr_pages) { - struct sock *sk = skb->sk; int ret; /* -- cgit v0.10.2 From 96c16743973e8c1a7b9c655d10b7973408d6d1dd Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 30 Apr 2009 18:24:34 +0200 Subject: ide-cd: fix REQ_QUIET tests in cdrom_decode_status Original patch (dfa4411cc3a690011cab90e9a536938795366cf9) was buggy. This is a more proper fix which introduces blk_rq_quiet() macro alleviating the need for dumb, too short caching variables. Thanks to Helge Deller and Bart for debugging this. Signed-off-by: Borislav Petkov Cc: Jens Axboe Cc: Sergei Shtylyov Reported-and-tested-by: Helge Deller Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3d4e099..925eb9e 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -312,7 +312,6 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; int err, sense_key, do_end_request = 0; - u8 quiet = rq->cmd_flags & REQ_QUIET; /* get the IDE error register */ err = ide_read_error(drive); @@ -347,7 +346,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) } else { cdrom_saw_media_change(drive); - if (blk_fs_request(rq) && !quiet) + if (blk_fs_request(rq) && !blk_rq_quiet(rq)) printk(KERN_ERR PFX "%s: tray open\n", drive->name); } @@ -382,7 +381,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * No point in retrying after an illegal request or data * protect error. */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "command error", stat); do_end_request = 1; break; @@ -391,14 +390,14 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * No point in re-trying a zillion times on a bad sector. * If we got here the error is not correctable. */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "media error " "(bad sector)", stat); do_end_request = 1; break; case BLANK_CHECK: /* disk appears blank? */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "media error (blank)", stat); do_end_request = 1; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ba54c83..6f841fb 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -598,6 +598,7 @@ enum { blk_failfast_transport(rq) || \ blk_failfast_driver(rq)) #define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED) +#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET) #define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) -- cgit v0.10.2 From eacaad01b4e67336b5b3f4db6dc15ef92c64b47d Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 28 Apr 2009 07:49:21 -0700 Subject: Input: document the multi-touch (MT) protocol This patchs adds documentation for the multi-touch protocol to Documentation/input/. [randy.dunlap@oracle.com: grammar fixes] Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt new file mode 100644 index 0000000..9f09557 --- /dev/null +++ b/Documentation/input/multi-touch-protocol.txt @@ -0,0 +1,140 @@ +Multi-touch (MT) Protocol +------------------------- + Copyright (C) 2009 Henrik Rydberg + + +Introduction +------------ + +In order to utilize the full power of the new multi-touch devices, a way to +report detailed finger data to user space is needed. This document +describes the multi-touch (MT) protocol which allows kernel drivers to +report details for an arbitrary number of fingers. + + +Usage +----- + +Anonymous finger details are sent sequentially as separate packets of ABS +events. Only the ABS_MT events are recognized as part of a finger +packet. The end of a packet is marked by calling the input_mt_sync() +function, which generates a SYN_MT_REPORT event. The end of multi-touch +transfer is marked by calling the usual input_sync() function. + +A set of ABS_MT events with the desired properties is defined. The events +are divided into categories, to allow for partial implementation. The +minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and +ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the +device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size +of the approaching finger. Anisotropy and direction may be specified with +ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with +more granular information may specify general shapes as blobs, i.e., as a +sequence of rectangular shapes grouped together by an +ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify +whether the touching tool is a finger or a pen or something else. + + +Event Semantics +--------------- + +The word "contact" is used to describe a tool which is in direct contact +with the surface. A finger, a pen or a rubber all classify as contacts. + +ABS_MT_TOUCH_MAJOR + +The length of the major axis of the contact. The length should be given in +surface units. If the surface has an X times Y resolution, the largest +possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal. + +ABS_MT_TOUCH_MINOR + +The length, in surface units, of the minor axis of the contact. If the +contact is circular, this event can be omitted. + +ABS_MT_WIDTH_MAJOR + +The length, in surface units, of the major axis of the approaching +tool. This should be understood as the size of the tool itself. The +orientation of the contact and the approaching tool are assumed to be the +same. + +ABS_MT_WIDTH_MINOR + +The length, in surface units, of the minor axis of the approaching +tool. Omit if circular. + +The above four values can be used to derive additional information about +the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates +the notion of pressure. The fingers of the hand and the palm all have +different characteristic widths [1]. + +ABS_MT_ORIENTATION + +The orientation of the ellipse. The value should describe half a revolution +clockwise around the touch center. The scale of the value is arbitrary, but +zero should be returned for an ellipse aligned along the Y axis of the +surface. As an example, an index finger placed straight onto the axis could +return zero orientation, something negative when twisted to the left, and +something positive when twisted to the right. This value can be omitted if +the touching object is circular, or if the information is not available in +the kernel driver. + +ABS_MT_POSITION_X + +The surface X coordinate of the center of the touching ellipse. + +ABS_MT_POSITION_Y + +The surface Y coordinate of the center of the touching ellipse. + +ABS_MT_TOOL_TYPE + +The type of approaching tool. A lot of kernel drivers cannot distinguish +between different tool types, such as a finger or a pen. In such cases, the +event should be omitted. The protocol currently supports MT_TOOL_FINGER and +MT_TOOL_PEN [2]. + +ABS_MT_BLOB_ID + +The BLOB_ID groups several packets together into one arbitrarily shaped +contact. This is a low-level anonymous grouping, and should not be confused +with the high-level contactID, explained below. Most kernel drivers will +not have this capability, and can safely omit the event. + + +Finger Tracking +--------------- + +The kernel driver should generate an arbitrary enumeration of the set of +anonymous contacts currently on the surface. The order in which the packets +appear in the event stream is not important. + +The process of finger tracking, i.e., to assign a unique contactID to each +initiated contact on the surface, is left to user space; preferably the +multi-touch X driver [3]. In that driver, the contactID stays the same and +unique until the contact vanishes (when the finger leaves the surface). The +problem of assigning a set of anonymous fingers to a set of identified +fingers is a euclidian bipartite matching problem at each event update, and +relies on a sufficiently rapid update rate. + +Notes +----- + +In order to stay compatible with existing applications, the data +reported in a finger packet must not be recognized as single-touch +events. In addition, all finger data must bypass input filtering, +since subsequent events of the same type refer to different fingers. + +The first kernel driver to utilize the MT protocol is the bcm5974 driver, +where examples can be found. + +[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the +difference between the contact position and the approaching tool position +could be used to derive tilt. +[2] The list can of course be extended. +[3] The multi-touch X driver is currently in the prototyping stage. At the +time of writing (April 2009), the MT protocol is not yet merged, and the +prototype implements finger matching, basic mouse support and two-finger +scrolling. The project aims at improving the quality of current multi-touch +functionality available in the synaptics X driver, and in addition +implement more advanced gestures. -- cgit v0.10.2 From 9cba3ccc8fe77b67aff2db8f5827d7cb752ce11f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:03 +0100 Subject: [ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail This patch implements the recommended workaround for erratum 411920 (ARM1136, ARM1156, ARM1176). Signed-off-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 99875dd..e28a76b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -740,6 +740,15 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 && !SMP + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 2c6c2a7..8f5c13f 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -20,6 +20,31 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 +#ifdef CONFIG_ARM_ERRATA_411920 +/* + * Invalidate the entire I cache (this code is a workaround for the ARM1136 + * erratum 411920 - Invalidate Instruction Cache operation can fail. This + * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted + */ +ENTRY(v6_icache_inval_all) + mov r0, #0 + mrs r1, cpsr + cpsid ifa @ disable interrupts + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + msr cpsr_cx, r1 @ restore interrupts + .rept 11 @ ARM Ltd recommends at least + nop @ 11 NOPs + .endr + mov pc, lr +#endif + /* * v6_flush_cache_all() * @@ -31,8 +56,12 @@ ENTRY(v6_flush_kern_cache_all) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif mov pc, lr @@ -103,8 +132,12 @@ ENTRY(v6_coherent_user_range) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif mov pc, lr diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 4e28348..c07222e 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -18,6 +18,10 @@ #include "mm.h" +#ifdef CONFIG_ARM_ERRATA_411920 +extern void v6_icache_inval_all(void); +#endif + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) asm( "mcrr p15, 0, %1, %0, c14\n" " mcr p15, 0, %2, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %2, c7, c5, 0\n" +#endif : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } void flush_cache_mm(struct mm_struct *mm) @@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm) if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } @@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } -- cgit v0.10.2 From 7ce236fcd6fd45b0441a2d49acb2ceb2de2e8a47 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:09 +0100 Subject: [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch This patch adds the workaround for the 430973 Cortex-A8 (r1p0..r1p2) erratum. The BTAC/BTB is now flushed at every context switch. Signed-off-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e28a76b..84e4816 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -749,6 +749,22 @@ config ARM_ERRATA_411920 It does not affect the MPCore. This option enables the ARM Ltd. recommended workaround. +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index d1ebec4..fc81159 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -95,6 +95,9 @@ ENTRY(cpu_v7_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_FLAGS +#ifdef CONFIG_ARM_ERRATA_430973 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID isb 1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -180,6 +183,11 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} +#ifdef CONFIG_ARM_ERRATA_430973 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 6) @ set IBE to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate -- cgit v0.10.2 From 855c551f5b8cc3815d58e1056c1f1e7c461e2d24 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:15 +0100 Subject: [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is created This patch adds a workaround for the 458693 Cortex-A8 (r2p0) erratum. It sets the corresponding bits in the auxiliary control register so that the PLD instruction becomes a NOP. Signed-off-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 84e4816..49f8566 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -765,6 +765,19 @@ config ARM_ERRATA_430973 Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index fc81159..370baa7 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -188,6 +188,12 @@ __v7_setup: orr r10, r10, #(1 << 6) @ set IBE to 1 mcr p15, 0, r10, c1, c0, 1 @ write aux control register #endif +#ifdef CONFIG_ARM_ERRATA_458693 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 5) @ set L1NEON to 1 + orr r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate -- cgit v0.10.2 From 0516e4643cd22fc9f535aef02ad1de66c382c93b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:20 +0100 Subject: [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten with stale data This patch is a workaround for the 460075 Cortex-A8 (r2p0) erratum. It configures the L2 cache auxiliary control register so that the Write Allocate mode for the L2 cache is disabled. Signed-off-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49f8566..9faccc4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -778,6 +778,18 @@ config ARM_ERRATA_458693 in the ACTLR register. Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 370baa7..f230544 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -194,6 +194,11 @@ __v7_setup: orr r10, r10, #(1 << 9) @ set PLDNOP to 1 mcr p15, 0, r10, c1, c0, 1 @ write aux control register #endif +#ifdef CONFIG_ARM_ERRATA_460075 + mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register +#endif mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate -- cgit v0.10.2 From dfa13f39b798fee68250abe1aed851395c8b51b5 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Wed, 29 Apr 2009 17:55:08 -0700 Subject: ocfs2: Fix a missing credit when deleting from indexed directories. The ocfs2 directory index updates two blocks when we remove an entry - the dx root and the dx leaf. OCFS2_DELETE_INODE_CREDITS was only accounting for the dx leaf. This shows up when ocfs2_delete_inode() runs out of credits in jbd2_journal_dirty_metadata() at "J_ASSERT_JH(jh, handle->h_buffer_credits > 0);". The test that caught this was running dirop_file_racer from the ocfs2-test suite with a 250-character filename PREFIX. Run on a 512B blocksize, it forces the orphan dir index to grow large enough to trigger. Signed-off-by: Joel Becker diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index 619dd7f..eb7b763 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -437,8 +437,9 @@ static inline int ocfs2_unlink_credits(struct super_block *sb) } /* dinode + orphan dir dinode + inode alloc dinode + orphan dir entry + - * inode alloc group descriptor + orphan dir index leaf */ -#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 3) + * inode alloc group descriptor + orphan dir index root + + * orphan dir index leaf */ +#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 4) /* dinode update, old dir dinode update, new dir dinode update, old * dir dir entry, new dir dir entry, dir entry update for renaming -- cgit v0.10.2 From 2191aebaf9af9125bfee32808babe6f61446c8a6 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 17 Apr 2009 15:58:50 -0700 Subject: ocfs2: Change repository in MAINTAINERS. The ocfs2.git repository is moving to my kernel.org account. Signed-off-by: Joel Becker Acked-by: Mark Fasheh diff --git a/MAINTAINERS b/MAINTAINERS index c3b2159..7625387 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3335,7 +3335,7 @@ P: Joel Becker M: joel.becker@oracle.com L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers) W: http://oss.oracle.com/projects/ocfs2/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git S: Supported ORINOCO DRIVER -- cgit v0.10.2 From 79af6c49a93ea80952fd42dc180c8827cd8c984c Mon Sep 17 00:00:00 2001 From: Michael Wolf Date: Mon, 27 Apr 2009 06:17:54 +0000 Subject: powerpc adjust oprofile_cpu_type version 3 Oprofile is changing the naming it is using for the compatibility modes. Instead of having compat-power, oprofile will go to family naming convention and use ibm-compat-v. Currently only ibm-compat-v1 will be defined. The notion of compatibility events just started with POWER6. So there is no way that any other tool could exist that is using these oprofile_cpu_type strings we want to change. Signed-off-by: Mike Wolf Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index cd1b687..5e925db 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -382,7 +382,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power5+", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", }, { /* Power6 */ @@ -416,7 +417,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power6", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power6", }, { /* 2.06-compliant processor, i.e. Power7 "architected" mode */ @@ -429,7 +431,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power7", + .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_cpu_type = "ppc64/ibm-compat-v1", .platform = "power7", }, { /* Power7 */ @@ -1833,8 +1836,10 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * and, in that case, keep the current value for * oprofile_cpu_type. */ - if (old.oprofile_cpu_type == NULL) + if (old.oprofile_cpu_type == NULL) { t->oprofile_cpu_type = s->oprofile_cpu_type; + t->oprofile_type = s->oprofile_type; + } } *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; -- cgit v0.10.2 From 9d37a90f9c5271440c8f62b4adc71a726b4b86b6 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 28 Apr 2009 06:50:15 +0000 Subject: powerpc: Update MPC5xxx and Xilinx Virtex maintainer entries - Add git tree URLs - Drop Sylvain from the 5xxx maintainers list. He hasn't been active for a while now. Signed-off-by: Grant Likely Signed-off-by: Benjamin Herrenschmidt diff --git a/MAINTAINERS b/MAINTAINERS index c547f4a..30cc6af 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3434,11 +3434,10 @@ L: linuxppc-dev@ozlabs.org S: Maintained LINUX FOR POWERPC EMBEDDED MPC5XXX -P: Sylvain Munaut -M: tnt@246tNt.com P: Grant Likely M: grant.likely@secretlab.ca L: linuxppc-dev@ozlabs.org +T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC4XX @@ -3456,6 +3455,7 @@ P: Grant Likely M: grant.likely@secretlab.ca W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex L: linuxppc-dev@ozlabs.org +T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC8XX -- cgit v0.10.2 From 0203d6ec4e88062f20558fbed3cdff2af758a53b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 29 Apr 2009 19:39:38 +0000 Subject: powerpc: Fix setting of oprofile cpu type commit 2657dd4e301d4841ed67a4fac7d145ad8f3e1b28 introduced a bug where we would now always override the "real" oprofile CPU type with the "compatible" one provided by a pseudo-PVR in the device-tree which is incorrect and breaks oprofile on all current configs since the "compatible" ones aren't yet recognized. This fixes it. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 5e925db..f9c40f8 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1837,8 +1837,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * oprofile_cpu_type. */ if (old.oprofile_cpu_type == NULL) { - t->oprofile_cpu_type = s->oprofile_cpu_type; - t->oprofile_type = s->oprofile_type; + t->oprofile_cpu_type = old.oprofile_cpu_type; + t->oprofile_type = old.oprofile_type; } } -- cgit v0.10.2 From c520f72172814c202ee47c51a63a1b1dde7f22f2 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 20 Apr 2009 20:02:16 +0200 Subject: avr32: drop unused CLEAN_FILES Left over from before we used arch/avr32/include Signed-off-by: Sam Ravnborg Cc: Jesper Nilsson diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 0b97e14..c21a329 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -43,8 +43,6 @@ core-y += arch/avr32/mm/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ -CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch - BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec .PHONY: $(BOOT_TARGETS) install -- cgit v0.10.2 From 0c56042adc02fa460a2d6bc507a1e3f9bde326fc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Bri=C3=A8re?= Date: Sun, 19 Apr 2009 12:58:40 -0400 Subject: kbuild: clean Module.markers and modules.order for out-of-tree modules MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Frédéric Brière Signed-off-by: Sam Ravnborg diff --git a/Makefile b/Makefile index eb38c83..b309fca 100644 --- a/Makefile +++ b/Makefile @@ -1421,7 +1421,9 @@ $(clean-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) clean: rm-dirs := $(MODVERDIR) -clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers +clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \ + $(KBUILD_EXTMOD)/Module.markers \ + $(KBUILD_EXTMOD)/modules.order clean: $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) -- cgit v0.10.2 From c4d5ee67ce26503d7eaf2aca5bb13c58e89d1be8 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Fri, 24 Apr 2009 12:35:23 -0400 Subject: kbuild: "make prepare" should be "make modules_prepare" Correct the Makefile help text to read "make modules_prepare". Signed-off-by: Robert P. J. Day Signed-off-by: Sam Ravnborg diff --git a/Makefile b/Makefile index b309fca..b18afad 100644 --- a/Makefile +++ b/Makefile @@ -1293,7 +1293,7 @@ help: @echo ' dir/ - Build all files in dir and below' @echo ' dir/file.[ois] - Build specified target only' @echo ' dir/file.ko - Build module including final link' - @echo ' prepare - Set up for building external modules' + @echo ' modules_prepare - Set up for building external modules' @echo ' tags/TAGS - Generate tags file for editors' @echo ' cscope - Generate cscope index' @echo ' kernelrelease - Output the release version string' -- cgit v0.10.2 From 2e6cb8b0dc602ba4aa23d1ec7e3524a7268f59d9 Mon Sep 17 00:00:00 2001 From: Matt Kraai Date: Tue, 21 Apr 2009 20:38:23 -0700 Subject: kbuild: remove a tag file before it is regenerated If a tag file is not removed before it is regenerated, the newly generated data is appended to the old, which preserves stale data and makes the tag file grow over time. Signed-off-by: Matt Kraai Signed-off-by: Sam Ravnborg diff --git a/scripts/tags.sh b/scripts/tags.sh index 5bd8b10..4a34ec5 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -164,10 +164,12 @@ case "$1" in ;; "tags") + rm -f tags xtags ctags ;; "TAGS") + rm -f TAGS xtags etags ;; esac -- cgit v0.10.2 From 64e3da109404eed27f825ee3eb1fe465ded47979 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 17 Apr 2009 18:28:55 -0700 Subject: docs: also clean index.html Missed index.html in "make cleandocs", so add it. Signed-off-by: Randy Dunlap Signed-off-by: Sam Ravnborg diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 8918a32..b1eb661 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF $@ $(call cmd,db2pdf) -main_idx = Documentation/DocBook/index.html +index = index.html +main_idx = Documentation/DocBook/$(index) build_main_index = rm -rf $(main_idx) && \ echo '

Linux Kernel HTML Documentation

' >> $(main_idx) && \ echo '

Kernel Version: $(KERNELVERSION)

' >> $(main_idx) && \ @@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \ $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \ $(patsubst %.xml, %.html, $(DOCBOOKS)) \ $(patsubst %.xml, %.9, $(DOCBOOKS)) \ - $(C-procfs-example) + $(C-procfs-example) $(index) clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man -- cgit v0.10.2 From 99e3a1eb3c22bb671c6f3d22d8244bfc9fad8185 Mon Sep 17 00:00:00 2001 From: Cedric Hombourger Date: Sat, 25 Apr 2009 09:38:21 +0200 Subject: kbuild: fix Module.markers permission error under cygwin While building the kernel, we end-up calling modpost with -K and -M options for the same file (Modules.markers). This is resulting in modpost's main function calling read_markers() and then write_markers() on the same file. We then have read_markers() mmap'ing the file, and writer_markers() opening that same file for writing. The issue is that read_markers() exits without munmap'ing the file and is as a matter holding a reference on Modules.markers. When write_markers() is opening that very same file for writing, we still have a reference on it and cygwin (Windows?) is then making fopen() fail with EPERM. Calling release_file() before exiting read_markers() clears that reference (and memory leak) and fopen() then succeeds. Tested on both cygwin (1.3.22) and Linux. Also ran modpost within valgrind on Linux to make sure that the munmap'ed file was not accessed after read_markers() Signed-off-by: Cedric Hombourger Cc: Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 8d46ea7..57d71a5 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1990,6 +1990,7 @@ static void read_markers(const char *fname) if (!mod->skip) add_marker(mod, marker, fmt); } + release_file(file, size); return; fail: fatal("parse error in markers list file\n"); -- cgit v0.10.2 From a182ad3d0f858f50bb719a48bb35a013e12366c5 Mon Sep 17 00:00:00 2001 From: Nico Schottelius Date: Sat, 25 Apr 2009 09:48:39 +0200 Subject: kbuild: fix scripts/setlocalversion with git When using trees like wireless-testing, which have untagged tags, scripts/setlocalversion does not display any git indication for localversion. This patch fixes it: If git is available, but no usable tag is found, it uses -g${head}. It skips the detection of unanottated tags via git name-rev. Signed-off-by: Nico Schottelius Signed-off-by: Sam Ravnborg diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 47e75b6..32c8554 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -10,13 +10,12 @@ cd "${1:-.}" || usage # Check for git and a git repo. if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then - # Do we have an untagged version? - if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then - if tag=`git describe 2>/dev/null`; then - echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' - else - printf '%s%s' -g $head - fi + # Do we have an untagged tag? + if atag=`git describe 2>/dev/null`; then + echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' + # add -g${head}, if there is no usable tag + else + printf '%s%s' -g $head fi # Is this git on svn? -- cgit v0.10.2 From c993971f4a7dc7ae43963aecb958395353c109ae Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 26 Apr 2009 11:17:42 +0200 Subject: kbuild: fix comment in modpost.c There is some confusion on naming of the head section. Correct naming is .head.text. Fix comment so we use correct naming. Signed-off-by: Sam Ravnborg diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 57d71a5..e5ae695 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -928,8 +928,7 @@ static int section_mismatch(const char *fromsec, const char *tosec) * *probe_one, *_console, *_timer * * Pattern 3: - * Whitelist all refereces from .text.head to .init.data - * Whitelist all refereces from .text.head to .init.text + * Whitelist all references from .head.text to any init section * * Pattern 4: * Some symbols belong to init section but still it is ok to reference -- cgit v0.10.2 From b614a697dc17dff82f140d72d21a095f810fa7fb Mon Sep 17 00:00:00 2001 From: Anders Kaseorg Date: Thu, 23 Apr 2009 16:49:33 -0400 Subject: kbuild, modpost: Check the section flags, to catch missing "ax"/"aw" When you put .section ".foo" in an assembly file instead of .section "foo", "ax" , one of the possible symptoms is that modpost will see an ld-generated section name ".foo.1" in section_rel() or section_rela(). But this heuristic has two problems: it will miss a bad section that has no relocations, and it will incorrectly flag many gcc-generated sections as bad when compiling with -ffunction-sections -fdata-sections. On mips it fixes a lot of bogus warnings with gcc 4.4.0 lije this one: WARNING: crypto/cryptd.o (.text.T.349): unexpected section name. So instead of checking whether the section name matches a particular pattern, we directly check for a missing SHF_ALLOC in the section flags. Signed-off-by: Anders Kaseorg Tested-by: Ralf Baechle Signed-off-by: Sam Ravnborg diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index e5ae695..936b6f8 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -716,41 +716,27 @@ int match(const char *sym, const char * const pat[]) /* sections that we do not want to do full section mismatch check on */ static const char *section_white_list[] = - { ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL }; + { ".comment", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL }; /* - * Is this section one we do not want to check? - * This is often debug sections. - * If we are going to check this section then - * test if section name ends with a dot and a number. - * This is used to find sections where the linker have - * appended a dot-number to make the name unique. + * This is used to find sections missing the SHF_ALLOC flag. * The cause of this is often a section specified in assembler - * without "ax" / "aw" and the same section used in .c - * code where gcc add these. + * without "ax" / "aw". */ -static int check_section(const char *modname, const char *sec) -{ - const char *e = sec + strlen(sec) - 1; - if (match(sec, section_white_list)) - return 1; - - if (*e && isdigit(*e)) { - /* consume all digits */ - while (*e && e != sec && isdigit(*e)) - e--; - if (*e == '.' && !strstr(sec, ".linkonce")) { - warn("%s (%s): unexpected section name.\n" - "The (.[number]+) following section name are " - "ld generated and not expected.\n" - "Did you forget to use \"ax\"/\"aw\" " - "in a .S file?\n" - "Note that for example contains\n" - "section definitions for use in .S files.\n\n", - modname, sec); - } +static void check_section(const char *modname, struct elf_info *elf, + Elf_Shdr *sechdr) +{ + const char *sec = sech_name(elf, sechdr); + + if (sechdr->sh_type == SHT_PROGBITS && + !(sechdr->sh_flags & SHF_ALLOC) && + !match(sec, section_white_list)) { + warn("%s (%s): unexpected non-allocatable section.\n" + "Did you forget to use \"ax\"/\"aw\" in a .S file?\n" + "Note that for example contains\n" + "section definitions for use in .S files.\n\n", + modname, sec); } - return 0; } @@ -1358,7 +1344,7 @@ static void section_rela(const char *modname, struct elf_info *elf, fromsec = sech_name(elf, sechdr); fromsec += strlen(".rela"); /* if from section (name) is know good then skip it */ - if (check_section(modname, fromsec)) + if (match(fromsec, section_white_list)) return; for (rela = start; rela < stop; rela++) { @@ -1402,7 +1388,7 @@ static void section_rel(const char *modname, struct elf_info *elf, fromsec = sech_name(elf, sechdr); fromsec += strlen(".rel"); /* if from section (name) is know good then skip it */ - if (check_section(modname, fromsec)) + if (match(fromsec, section_white_list)) return; for (rel = start; rel < stop; rel++) { @@ -1465,6 +1451,7 @@ static void check_sec_ref(struct module *mod, const char *modname, /* Walk through all sections */ for (i = 0; i < elf->hdr->e_shnum; i++) { + check_section(modname, elf, &elf->sechdrs[i]); /* We want to process only relocation sections and not .init */ if (sechdrs[i].sh_type == SHT_RELA) section_rela(modname, elf, &elf->sechdrs[i]); -- cgit v0.10.2 From d7226fb6ec5d4f325e4e7fd905894e2ea3eb3ae0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 1 May 2009 15:16:04 +0200 Subject: Revert "genirq: assert that irq handlers are indeed running in hardirq context" This reverts commit 044d408409cc4e1bc75c886e27ca85c270db104c. The commit added a warning when handle_IRQ_event() is called outside of hard interrupt context. This breaks the generic tasklet based interrupt resend mechanism which is used when the hardware has no way to retrigger the interrupt. So we get a warning for a use case which is correct and worked for years. Remove it. Signed-off-by: Thomas Gleixner diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c index d82142b..26e0875 100644 --- a/kernel/irq/handle.c +++ b/kernel/irq/handle.c @@ -363,8 +363,6 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action) irqreturn_t ret, retval = IRQ_NONE; unsigned int status = 0; - WARN_ONCE(!in_irq(), "BUG: IRQ handler called from non-hardirq context!"); - if (!(action->flags & IRQF_DISABLED)) local_irq_enable_in_hardirq(); -- cgit v0.10.2 From ec581f6a42bbbea5271c66da9769a41b46c74e10 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 1 May 2009 09:05:06 -0700 Subject: net: Fix skb_tx_hash() for forwarding workloads. When skb_rx_queue_recorded() is true, we dont want to use jash distribution as the device driver exactly told us which queue was selected at RX time. jhash makes a statistical shuffle, but this wont work with 8 static inputs. Later improvements would be to compute reciprocal value of real_num_tx_queues to avoid a divide here. But this computation should be done once, when real_num_tx_queues is set. This needs a separate patch, and a new field in struct net_device. Reported-by: Andrew Dickinson Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 308a7d0..e2e9e4a 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1735,11 +1735,12 @@ u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb) { u32 hash; - if (skb_rx_queue_recorded(skb)) { - hash = skb_get_rx_queue(skb); - } else if (skb->sk && skb->sk->sk_hash) { + if (skb_rx_queue_recorded(skb)) + return skb_get_rx_queue(skb) % dev->real_num_tx_queues; + + if (skb->sk && skb->sk->sk_hash) hash = skb->sk->sk_hash; - } else + else hash = skb->protocol; hash = jhash_1word(hash, skb_tx_hashrnd); -- cgit v0.10.2 From 0f3d042ed2f934f149ccb78300454beaf0c1134b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 1 May 2009 09:10:46 -0700 Subject: netfilter: use likely() in xt_info_rdlock_bh() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 1b2e435..c9efe03 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -472,7 +472,7 @@ static inline void xt_info_rdlock_bh(void) local_bh_disable(); lock = &__get_cpu_var(xt_info_locks); - if (!lock->readers++) + if (likely(!lock->readers++)) spin_lock(&lock->lock); } @@ -480,7 +480,7 @@ static inline void xt_info_rdunlock_bh(void) { struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks); - if (!--lock->readers) + if (likely(!--lock->readers)) spin_unlock(&lock->lock); local_bh_enable(); } -- cgit v0.10.2 From 00b64f2aa5e8741b49e48ebad1116cc78dbbf0fd Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Fri, 1 May 2009 09:15:09 -0700 Subject: =?UTF-8?q?cxgb3:=20fixing=20gcc=204.4=20compiler=20warning:=20sug?= =?UTF-8?q?gest=20parentheses=20around=20operand=20of=20=E2=80=98!?= =?UTF-8?q?=E2=80=99?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Trivial: fixing gcc 4.4 compiler warning: drivers/net/cxgb3/t3_hw.c: In function ‘t3_prep_adapter’: drivers/net/cxgb3/t3_hw.c:3782: warning: suggest parentheses around operand of ‘!’ or change ‘|’ to ‘||’ or ‘!’ to ‘~’ Signed-off-by: Sergey Senozhatsky Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index e1bd690..4f68aeb 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -3779,7 +3779,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, adapter->params.info = ai; adapter->params.nports = ai->nports0 + ai->nports1; - adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1); + adapter->params.chan_map = (!!ai->nports0) | (!!ai->nports1 << 1); adapter->params.rev = t3_read_reg(adapter, A_PL_REV); /* * We used to only run the "adapter check task" once a second if -- cgit v0.10.2 From f9a196b8dceba3c1e5fe885b81e45043ad7c60fc Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 1 May 2009 20:59:25 +0200 Subject: x86: initialize io_bitmap_base on 32bit commit db949bba3c7cf2e664ac12e237c6d4c914f0c69d (x86-32: use non-lazy io bitmap context switching) broke ioperm for 32bit because it removed the lazy initialization of io_bitmap_base and did not set it to the real bitmap offset. [ Impact: fix non-working sys_ioperm() on 32-bit kernels ] Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c4f6678..c1caefc 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1203,6 +1203,8 @@ void __cpuinit cpu_init(void) load_TR_desc(); load_LDT(&init_mm.context); + t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + #ifdef CONFIG_DOUBLEFAULT /* Set up doublefault TSS pointer in the GDT */ __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); -- cgit v0.10.2 From e5288eb5ea89bd82d897cb687348bc608278f920 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Sat, 2 May 2009 00:02:57 +0200 Subject: HID: fix oops in hid_check_keys_pressed() If the device is not claimed by hid-input (i.e devices driver by userspace hiddev/hidraw-based drivers, or completely detached from HID and driver by libusb), we must not check the hid->inptus, as it is not guaranteed to be initialized, as this is performed only for devices handled by hid-input. Reported-by: Guillaume Chazarain Tested-by: Guillaume Chazarain Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index c7075d2..8551693 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1825,6 +1825,9 @@ int hid_check_keys_pressed(struct hid_device *hid) struct hid_input *hidinput; int i; + if (!(hid->claimed & HID_CLAIMED_INPUT)) + return 0; + list_for_each_entry(hidinput, &hid->inputs, list) { for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++) if (hidinput->input->key[i]) -- cgit v0.10.2 From 689c96cca7ec3d2ba7fba00481810f99f1803c63 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 23 Apr 2009 03:39:04 +0000 Subject: bonding: bond_slave_info_query() fix bond_slave_info_query() should keep a read lock while accessing slave info, or risk accessing stale data and corruption. Signed-off-by: Eric Dumazet Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 63369b6..67515b7 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2213,33 +2213,24 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in { struct bonding *bond = netdev_priv(bond_dev); struct slave *slave; - int i, found = 0; - - if (info->slave_id < 0) { - return -ENODEV; - } + int i, res = -ENODEV; read_lock(&bond->lock); bond_for_each_slave(bond, slave, i) { if (i == (int)info->slave_id) { - found = 1; + res = 0; + strcpy(info->slave_name, slave->dev->name); + info->link = slave->link; + info->state = slave->state; + info->link_failure_count = slave->link_failure_count; break; } } read_unlock(&bond->lock); - if (found) { - strcpy(info->slave_name, slave->dev->name); - info->link = slave->link; - info->state = slave->state; - info->link_failure_count = slave->link_failure_count; - } else { - return -ENODEV; - } - - return 0; + return res; } /*-------------------------------- Monitoring -------------------------------*/ -- cgit v0.10.2 From acda074390270ca9e28f2a9729f7b835e2ad6da4 Mon Sep 17 00:00:00 2001 From: Laszlo Attila Toth Date: Fri, 1 May 2009 15:23:10 -0700 Subject: xt_socket: checks for the state of nf_conntrack xt_socket can use connection tracking, and checks whether it is a module. Signed-off-by: Laszlo Attila Toth Signed-off-by: David S. Miller diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 881203c..cb3ad74 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -837,6 +837,7 @@ config NETFILTER_XT_MATCH_SOCKET depends on NETFILTER_TPROXY depends on NETFILTER_XTABLES depends on NETFILTER_ADVANCED + depends on !NF_CONNTRACK || NF_CONNTRACK select NF_DEFRAG_IPV4 help This option adds a `socket' match, which can be used to match -- cgit v0.10.2 From 2382b15bcc39228572ccf1d9a1185dcabb84c833 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Wed, 29 Apr 2009 20:45:17 +0000 Subject: netconsole: take care of NETDEV_UNREGISTER event MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When netconsole is loaded and a network interface fades away (e.g. on rmmod $interface_driver_module) the rmmod remains stuck and some locks are taken that prevent any additional module loading/unloading as well as interface up/down changes. In addition kernel logs (and console) get flooded at 10s interval with [ 122.464065] unregister_netdevice: waiting for eth0 to become free. Usage count = 1 [ 132.704059] unregister_netdevice: waiting for eth0 to become free. Usage count = 1 This patch lets netconsole take NETDEV_UNREGISTER event into account and release the affected interface if it was in use. Signed-off-by: Bruno Prémont Acked-by: Matt Mackall Signed-off-by: David S. Miller diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index eceadf7..bf4af52 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -664,7 +664,7 @@ static int netconsole_netdev_event(struct notifier_block *this, struct netconsole_target *nt; struct net_device *dev = ptr; - if (!(event == NETDEV_CHANGENAME)) + if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER)) goto done; spin_lock_irqsave(&target_list_lock, flags); @@ -675,6 +675,15 @@ static int netconsole_netdev_event(struct notifier_block *this, case NETDEV_CHANGENAME: strlcpy(nt->np.dev_name, dev->name, IFNAMSIZ); break; + case NETDEV_UNREGISTER: + if (!nt->enabled) + break; + netpoll_cleanup(&nt->np); + nt->enabled = 0; + printk(KERN_INFO "netconsole: network logging stopped" + ", interface %s unregistered\n", + dev->name); + break; } } netconsole_target_put(nt); -- cgit v0.10.2 From f293501c61c50b014ad2347661c6acd951c80fed Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Fri, 1 May 2009 05:46:51 +0000 Subject: smsc95xx: configure LED outputs SMSC LAN9500 has dual purpose GPIO/LED pins, and by default at power-on these are configured as GPIOs. This means that if LEDs are fitted they won't ever light. This patch sets them to be LED outputs for speed, duplex and link/activity. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index dc16653..0fd68a5 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -941,6 +941,16 @@ static int smsc95xx_reset(struct usbnet *dev) if (netif_msg_ifup(dev)) devdbg(dev, "ID_REV = 0x%08x", read_buf); + /* Configure GPIO pins as LED outputs */ + write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | + LED_GPIO_CFG_FDX_LED; + ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); + if (ret < 0) { + devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d", + ret); + return ret; + } + /* Init Tx */ write_buf = 0; ret = smsc95xx_write_reg(dev, FLOW, write_buf); diff --git a/drivers/net/usb/smsc95xx.h b/drivers/net/usb/smsc95xx.h index 66b5c84..86bc449 100644 --- a/drivers/net/usb/smsc95xx.h +++ b/drivers/net/usb/smsc95xx.h @@ -99,6 +99,9 @@ #define PM_CTL_WUPS_MULTI_ (0x00000003) #define LED_GPIO_CFG (0x24) +#define LED_GPIO_CFG_SPD_LED (0x01000000) +#define LED_GPIO_CFG_LNK_LED (0x00100000) +#define LED_GPIO_CFG_FDX_LED (0x00010000) #define GPIO_CFG (0x28) -- cgit v0.10.2 From 726474b8cd0f0f49c570b1dbbab44be898797550 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Fri, 1 May 2009 06:07:22 +0000 Subject: smsc95xx: add support for LAN9512 and LAN9514 LAN9512 and LAN9514 are USB hubs with an integrated 10/100 ethernet controller. Logically this looks like an ethernet controller (similar to LAN9500) permanently attached to one of the hub's downstream ports. This patch adds the usb device id of the new ethernet controller to the smsc95xx driver. This id is the same in both new devices. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 0fd68a5..5a72833 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1241,6 +1241,11 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0424, 0x9500), .driver_info = (unsigned long) &smsc95xx_info, }, + { + /* SMSC9512/9514 USB Hub & Ethernet Device */ + USB_DEVICE(0x0424, 0xec00), + .driver_info = (unsigned long) &smsc95xx_info, + }, { }, /* END */ }; MODULE_DEVICE_TABLE(usb, products); -- cgit v0.10.2 From c047fcd245975f40312ed57bf43e7d4abd188e6b Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 1 May 2009 15:34:02 -0700 Subject: virtio: add missing include to virtio_net.h virtio_net.h uses the macro ETH_ALEN which is defined in linux/if_ether.h. Discovered when hacking on virtio-over-pci patches. Signed-off-by: Grant Likely Signed-off-by: David S. Miller diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 242348b..cec79ad 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -4,6 +4,7 @@ * compatible drivers/servers. */ #include #include +#include /* The ID for virtio_net */ #define VIRTIO_ID_NET 1 -- cgit v0.10.2 From 1363d9b135270662852ed2e6629fb79a36de5400 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 1 May 2009 15:35:28 -0700 Subject: bonding: correct the cleanup in bond_create() This patch makes the cleanup in bond_create nicer :) Also now the forgotten free_netdev is called. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 67515b7..2188a96 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -5158,16 +5158,15 @@ int bond_create(char *name, struct bond_params *params) up_write(&bonding_rwsem); rtnl_unlock(); /* allows sysfs registration of net device */ res = bond_create_sysfs_entry(netdev_priv(bond_dev)); - if (res < 0) { - rtnl_lock(); - down_write(&bonding_rwsem); - bond_deinit(bond_dev); - unregister_netdevice(bond_dev); - goto out_rtnl; - } + if (res < 0) + goto out_unreg; return 0; +out_unreg: + rtnl_lock(); + down_write(&bonding_rwsem); + unregister_netdevice(bond_dev); out_bond: bond_deinit(bond_dev); out_netdev: -- cgit v0.10.2 From 23e258e1a871c0c0cd91c294f7e66ccac74ef243 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Fri, 1 May 2009 17:27:56 +0000 Subject: virtio_net: Cleanup command queue scatterlist usage We were avoiding calling sg_init* on scatterlists passed into virtnet_send_command to prevent extraneous end markers. This caused build warnings for uninitialized variables. Cleanup the code to create proper scatterlists. Signed-off-by: Alex Williamson Signed-off-by: David S. Miller diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 9c82a39..23eb282 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -616,10 +616,11 @@ static int virtnet_open(struct net_device *dev) static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, struct scatterlist *data, int out, int in) { - struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; + struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; struct virtio_net_ctrl_hdr ctrl; virtio_net_ctrl_ack status = ~0; unsigned int tmp; + int i; if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) { BUG(); /* Caller should know better */ @@ -637,7 +638,8 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, sg_init_table(sg, out + in); sg_set_buf(&sg[0], &ctrl, sizeof(ctrl)); - memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2)); + for_each_sg(data, s, out + in - 2, i) + sg_set_buf(&sg[i + 1], sg_virt(s), s->length); sg_set_buf(&sg[out + in - 1], &status, sizeof(status)); if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0) @@ -692,7 +694,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) promisc = ((dev->flags & IFF_PROMISC) != 0); allmulti = ((dev->flags & IFF_ALLMULTI) != 0); - sg_set_buf(sg, &promisc, sizeof(promisc)); + sg_init_one(sg, &promisc, sizeof(promisc)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_PROMISC, @@ -700,7 +702,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) dev_warn(&dev->dev, "Failed to %sable promisc mode.\n", promisc ? "en" : "dis"); - sg_set_buf(sg, &allmulti, sizeof(allmulti)); + sg_init_one(sg, &allmulti, sizeof(allmulti)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_ALLMULTI, @@ -716,6 +718,8 @@ static void virtnet_set_rx_mode(struct net_device *dev) return; } + sg_init_table(sg, 2); + /* Store the unicast list and count in the front of the buffer */ mac_data->entries = dev->uc_count; addr = dev->uc_list; @@ -749,7 +753,7 @@ static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0)) @@ -761,7 +765,7 @@ static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0)) -- cgit v0.10.2 From 1824a9897473fda5e5e42f991ddc674c175e3a09 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Fri, 1 May 2009 17:31:10 +0000 Subject: virtio_net: Fix function name typo Signed-off-by: Alex Williamson Signed-off-by: David S. Miller diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 23eb282..4d1d479 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -748,7 +748,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) kfree(buf); } -static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; @@ -760,7 +760,7 @@ static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid); } -static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; @@ -798,8 +798,8 @@ static const struct net_device_ops virtnet_netdev = { .ndo_set_mac_address = virtnet_set_mac_address, .ndo_set_rx_mode = virtnet_set_rx_mode, .ndo_change_mtu = virtnet_change_mtu, - .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid, + .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = virtnet_netpoll, #endif -- cgit v0.10.2 From 74a03b69d1b5ce00a568e142ca97e76b7f5239c6 Mon Sep 17 00:00:00 2001 From: john stultz Date: Fri, 1 May 2009 13:10:25 -0700 Subject: clockevents: prevent endless loop in tick_handle_periodic() tick_handle_periodic() can lock up hard when a one shot clock event device is used in combination with jiffies clocksource. Avoid an endless loop issue by requiring that a highres valid clocksource be installed before we call tick_periodic() in a loop when using ONESHOT mode. The result is we will only increment jiffies once per interrupt until a continuous hardware clocksource is available. Without this, we can run into a endless loop, where each cycle through the loop, jiffies is updated which increments time by tick_period or more (due to clock steering), which can cause the event programming to think the next event was before the newly incremented time and fail causing tick_periodic() to be called again and the whole process loops forever. [ Impact: prevent hard lock up ] Signed-off-by: John Stultz Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner Cc: stable@kernel.org diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 21a5ca8..83c4417 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -93,7 +93,17 @@ void tick_handle_periodic(struct clock_event_device *dev) for (;;) { if (!clockevents_program_event(dev, next, ktime_get())) return; - tick_periodic(cpu); + /* + * Have to be careful here. If we're in oneshot mode, + * before we call tick_periodic() in a loop, we need + * to be sure we're using a real hardware clocksource. + * Otherwise we could get trapped in an infinite + * loop, as the tick_periodic() increments jiffies, + * when then will increment time, posibly causing + * the loop to trigger again and again. + */ + if (timekeeping_valid_for_hres()) + tick_periodic(cpu); next = ktime_add(next, tick_period); } } -- cgit v0.10.2 From 9c88b06dc7589fb0bccd617c4659066fb803cfda Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 2 May 2009 20:29:00 +0900 Subject: m32r: build fix for __stringify macro This patch fixes the following build error of 2.6.30-rc3-git2: AS arch/m32r/kernel/head.o In file included from /include/linux/init.h:7, from /arch/m32r/kernel/head.S:11: /include/linux/stringify.h:9: error: syntax error in macro parameter list /include/linux/stringify.h:10: error: syntax error in macro parameter list This build error was caused at __HEAD macro in arch/m32r/kernel/head.S, which uses __stringify() macro. Remove -traditional option from EXTRA_AFLAGS for the m32r, because the __stringify() macro depends on the gcc's variadic macro extension function, due to commit: Make __stringify support variable argument macros too commit: 8f7c2c37319a81ef4c2bfdec67b1ccd5744d97e4 Signed-off-by: Hirokazu Takata diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index d908e1d..560484a 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -6,7 +6,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \ piggy.o vmlinux.lds -EXTRA_AFLAGS := -traditional OBJECTS = $(obj)/head.o $(obj)/misc.o diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile index 09200d4..b1a4b60 100644 --- a/arch/m32r/kernel/Makefile +++ b/arch/m32r/kernel/Makefile @@ -9,5 +9,3 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_MODULES) += module.o - -EXTRA_AFLAGS := -traditional -- cgit v0.10.2 From 9cd67243de582c206758adff152c5fcc1b2aa069 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 2 May 2009 22:08:33 +0900 Subject: m32r: use __stringify() macro in assembler.h Replace #x with __stringify(x). Also, #ifndef __STR is removed and undefine __STR macro at the beginning. The __STR() macro is still remained, because the assembler.h might be included from assembly codes as well as C codes. Signed-off-by: Hirokazu Takata diff --git a/arch/m32r/include/asm/assembler.h b/arch/m32r/include/asm/assembler.h index 2635153..728799f 100644 --- a/arch/m32r/include/asm/assembler.h +++ b/arch/m32r/include/asm/assembler.h @@ -9,14 +9,15 @@ * This file contains M32R architecture specific macro definitions. */ +#include + +#undef __STR -#ifndef __STR #ifdef __ASSEMBLY__ #define __STR(x) x #else -#define __STR(x) #x +#define __STR(x) __stringify(x) #endif -#endif /* __STR */ #ifdef CONFIG_SMP #define M32R_LOCK __STR(lock) -- cgit v0.10.2 From 53951bd57dfe2da58f86cdf276719082d80d8485 Mon Sep 17 00:00:00 2001 From: Robert Moore Date: Sat, 2 May 2009 11:48:37 -0700 Subject: acpica: validate package element more carefully in acpi_rs_get_pci_routing_table_length acpi_rs_get_pci_routing_table_length is not performing sufficient validation on the package returned from _PRT. It assumes a package of packages and fails/faults if this is not the case. We should validate each subpackage when extracted from the parent package, and not accept objects of the wrong type, since that will just cause the scanning to fail (likely with a kernel oops). This can only happen with a serious BIOS bug, and is accompanied by a warning something like this: ACPI Warning (nspredef-0949): \_SB_.PCI0.PEG4._PRT: Return Package type mismatch at index 0 - found Integer, expected Package [20090320] Signed-off-by: Linus Torvalds diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index b6667ff..88b5a2c 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -543,6 +543,13 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, package_element = *top_object_list; + /* We must have a valid Package object */ + + if (!package_element || + (package_element->common.type != ACPI_TYPE_PACKAGE)) { + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + /* * The sub_object_list will now point to an array of the * four IRQ elements: Address, Pin, Source and source_index -- cgit v0.10.2 From d0ab8ff81bf1b01bae7d6b92ca067badbbb02cc9 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Sat, 2 May 2009 13:48:32 -0700 Subject: net: Only store high 16 bits of kernel generated filter priorities The kernel should only be using the high 16 bits of a kernel generated priority. Filter priorities in all other cases only use the upper 16 bits of the u32 'prio' field of 'struct tcf_proto', but when the kernel generates the priority of a filter is saves all 32 bits which can result in incorrect lookup failures when a filter needs to be deleted or modified. Signed-off-by: Robert Love Signed-off-by: David S. Miller diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 173fcc4..0759f32 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -254,7 +254,7 @@ replay: } tp->ops = tp_ops; tp->protocol = protocol; - tp->prio = nprio ? : tcf_auto_prio(*back); + tp->prio = nprio ? : TC_H_MAJ(tcf_auto_prio(*back)); tp->q = q; tp->classify = tp_ops->classify; tp->classid = parent; -- cgit v0.10.2 From 902e5ea15f8471a3213a37b11b98196f3406aeaf Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sat, 2 May 2009 13:49:36 -0700 Subject: Subject: [PATCH] br2684: restore net_dev initialization Commit 0ba25ff4c669e5395110ba6ab4958a97a9f96922 ("br2684: convert to net_device_ops") inadvertently deleted the initialization of the net_dev pointer in the br2684_dev structure, leading to crashes. This patch adds it back. Reported-by: Mikko Vinni Tested-by: Mikko Vinni Signed-off-by: Rabin Vincent Signed-off-by: David S. Miller diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 334fcd4..3100a89 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -549,6 +549,7 @@ static void br2684_setup(struct net_device *netdev) struct br2684_dev *brdev = BRPRIV(netdev); ether_setup(netdev); + brdev->net_dev = netdev; netdev->netdev_ops = &br2684_netdev_ops; -- cgit v0.10.2 From 379b026ecc20c4657d37e40ead789f7f28f1a1c1 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 2 May 2009 13:52:13 -0700 Subject: ne2k-pci: Do not register device until initialized. Doing it in reverse order causes uevent to be sent before we have a MAC address, which confuses udev. Signed-off-by: Lubomir Rintel Acked-by: Jeff Garzik Signed-off-by: David S. Miller diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index eb66f65..7d83896 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -374,18 +374,17 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, dev->ethtool_ops = &ne2k_pci_ethtool_ops; NS8390_init(dev, 0); + memcpy(dev->dev_addr, SA_prom, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + i = register_netdev(dev); if (i) goto err_out_free_netdev; - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SA_prom[i]; printk("%s: %s found at %#lx, IRQ %d, %pM.\n", dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq, dev->dev_addr); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - return 0; err_out_free_netdev: -- cgit v0.10.2 From bc43f75cd9815833b27831600ccade672edb5e43 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 30 Apr 2009 15:08:08 -0700 Subject: mm: fix pageref leak in do_swap_page() By the time the memory cgroup code is notified about a swapin we already hold a reference on the fault page. If the cgroup callback fails make sure to unlock AND release the page reference which was taken by lookup_swap_cach(), or we leak the reference. Signed-off-by: Johannes Weiner Cc: Balbir Singh Reviewed-by: Minchan Kim Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index cf6873e..6a4ef0f 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2458,8 +2458,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma, if (mem_cgroup_try_charge_swapin(mm, page, GFP_KERNEL, &ptr)) { ret = VM_FAULT_OOM; - unlock_page(page); - goto out; + goto out_page; } /* @@ -2521,6 +2520,7 @@ out: out_nomap: mem_cgroup_cancel_charge_swapin(ptr); pte_unmap_unlock(page_table, ptl); +out_page: unlock_page(page); page_cache_release(page); return ret; -- cgit v0.10.2 From a8985f3ac503b51c5abf8883fc4fb912e13b955c Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Thu, 30 Apr 2009 15:08:09 -0700 Subject: autofs4: fix incorrect return in autofs4_mount_busy() Fix an obvious incorrect return status in autofs4_mount_busy(). Signed-off-by: Ian Kent Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c index 75f7dda..3077d8f 100644 --- a/fs/autofs4/expire.c +++ b/fs/autofs4/expire.c @@ -70,8 +70,10 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry) * Otherwise it's an offset mount and we need to check * if we can umount its mount, if there is one. */ - if (!d_mountpoint(dentry)) + if (!d_mountpoint(dentry)) { + status = 0; goto done; + } } /* Update the expiry counter if fs is busy */ -- cgit v0.10.2 From 1e50cc9022d6c0b9175d804573e3f401d00d1381 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 30 Apr 2009 15:08:10 -0700 Subject: MAINTAINERS: Florian has moved I will finish school soon, so replace my student address with this one. Signed-off-by: Florian Fainelli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index c547f4a..585b244 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4666,13 +4666,13 @@ F: kernel/rcutorture.c RDC R-321X SoC P: Florian Fainelli -M: florian.fainelli@telecomint.eu +M: florian@openwrt.org L: linux-kernel@vger.kernel.org S: Maintained RDC R6040 FAST ETHERNET DRIVER P: Florian Fainelli -M: florian.fainelli@telecomint.eu +M: florian@openwrt.org L: netdev@vger.kernel.org S: Maintained F: drivers/net/r6040.c -- cgit v0.10.2 From c0bd3f63ce01a1757dbce6373122a05fbf99ced7 Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Thu, 30 Apr 2009 15:08:11 -0700 Subject: memcg: fix try_get_mem_cgroup_from_swapcache() This is a bugfix for commit 3c776e64660028236313f0e54f3a9945764422df ("memcg: charge swapcache to proper memcg"). Used bit of swapcache is solid under page lock, but considering move_account, pc->mem_cgroup is not. We need lock_page_cgroup() anyway. Signed-off-by: Daisuke Nishimura Acked-by: KAMEZAWA Hiroyuki Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index e44fb0f..575203a 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1024,9 +1024,7 @@ static struct mem_cgroup *try_get_mem_cgroup_from_swapcache(struct page *page) return NULL; pc = lookup_page_cgroup(page); - /* - * Used bit of swapcache is solid under page lock. - */ + lock_page_cgroup(pc); if (PageCgroupUsed(pc)) { mem = pc->mem_cgroup; if (mem && !css_tryget(&mem->css)) @@ -1040,6 +1038,7 @@ static struct mem_cgroup *try_get_mem_cgroup_from_swapcache(struct page *page) mem = NULL; rcu_read_unlock(); } + unlock_page_cgroup(pc); return mem; } -- cgit v0.10.2 From cf94a4d116fa7a1b81868d4b5410a41efe831a49 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 30 Apr 2009 15:08:12 -0700 Subject: MAINTAINERS: add ptrace entry Add Roland and Oleg as formal ptrace maintainers, they've been doing the job for a while. Includes the file patterns requested by Joe. Signed-off-by: Christoph Hellwig Acked-by: Roland McGrath Cc: Oleg Nesterov Cc: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 585b244..066644a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4521,6 +4521,19 @@ M: jim@jtan.com L: cbe-oss-dev@ozlabs.org S: Maintained +PTRACE SUPPORT +P: Roland McGrath +M: roland@redhat.com +P: Oleg Nesterov +M: oleg@redhat.com +L: linux-kernel@vger.kernel.org +S: Maintained +F: include/asm-generic/syscall.h +F: include/linux/ptrace.h +F: include/linux/regset.h +F: include/linux/tracehook.h +F: kernel/ptrace.c + PVRUSB2 VIDEO4LINUX DRIVER P: Mike Isely M: isely@pobox.com -- cgit v0.10.2 From 9e040a3e915d0a3da6caa665da7a458973e8f33e Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Thu, 30 Apr 2009 15:08:13 -0700 Subject: CRISv10: fix serial driver proc-usage drivers/serial/crisv10.c:4428: error: unknown field 'read_proc' specified in initializer Commit 0f043a81ebe84be3576667f04fdda481609e3816 ("proc tty: remove struct tty_operations::read_proc") removes the read_proc entry from struct tty_operations. Rework the proc handling in the CRISv10 serial driver to use proc_fops instead. Signed-off-by: Jesper Nilsson Cc: Alexey Dobriyan Cc: Alan Cox Cc: Mikael Starvik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 7ba7d70..7be52fe 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -23,16 +23,18 @@ static char *serial_version = "$Revision: 1.25 $"; #include #include #include -#include #include #include #include +#include +#include +#include +#include +#include -#include #include #include #include -#include #include @@ -456,7 +458,6 @@ static struct e100_serial rs_table[] = { #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) -static struct ktermios *serial_termios[NR_PORTS]; #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER static struct fast_timer fast_timers[NR_PORTS]; #endif @@ -4257,151 +4258,132 @@ rs_open(struct tty_struct *tty, struct file * filp) return 0; } +#ifdef CONFIG_PROC_FS /* * /proc fs routines.... */ -static int line_info(char *buf, struct e100_serial *info) +static void seq_line_info(struct seq_file *m, struct e100_serial *info) { - char stat_buf[30]; - int ret; unsigned long tmp; - ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->ioport, info->irq); + seq_printf(m, "%d: uart:E100 port:%lX irq:%d", + info->line, (unsigned long)info->ioport, info->irq); if (!info->ioport || (info->type == PORT_UNKNOWN)) { - ret += sprintf(buf+ret, "\n"); - return ret; + seq_printf(m, "\n"); + return; } - stat_buf[0] = 0; - stat_buf[1] = 0; - if (!E100_RTS_GET(info)) - strcat(stat_buf, "|RTS"); - if (!E100_CTS_GET(info)) - strcat(stat_buf, "|CTS"); - if (!E100_DTR_GET(info)) - strcat(stat_buf, "|DTR"); - if (!E100_DSR_GET(info)) - strcat(stat_buf, "|DSR"); - if (!E100_CD_GET(info)) - strcat(stat_buf, "|CD"); - if (!E100_RI_GET(info)) - strcat(stat_buf, "|RI"); - - ret += sprintf(buf+ret, " baud:%d", info->baud); - - ret += sprintf(buf+ret, " tx:%lu rx:%lu", + seq_printf(m, " baud:%d", info->baud); + seq_printf(m, " tx:%lu rx:%lu", (unsigned long)info->icount.tx, (unsigned long)info->icount.rx); tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (tmp) { - ret += sprintf(buf+ret, " tx_pend:%lu/%lu", - (unsigned long)tmp, - (unsigned long)SERIAL_XMIT_SIZE); - } + if (tmp) + seq_printf(m, " tx_pend:%lu/%lu", + (unsigned long)tmp, + (unsigned long)SERIAL_XMIT_SIZE); - ret += sprintf(buf+ret, " rx_pend:%lu/%lu", - (unsigned long)info->recv_cnt, - (unsigned long)info->max_recv_cnt); + seq_printf(m, " rx_pend:%lu/%lu", + (unsigned long)info->recv_cnt, + (unsigned long)info->max_recv_cnt); #if 1 if (info->port.tty) { - if (info->port.tty->stopped) - ret += sprintf(buf+ret, " stopped:%i", - (int)info->port.tty->stopped); + seq_printf(m, " stopped:%i", + (int)info->port.tty->stopped); if (info->port.tty->hw_stopped) - ret += sprintf(buf+ret, " hw_stopped:%i", - (int)info->port.tty->hw_stopped); + seq_printf(m, " hw_stopped:%i", + (int)info->port.tty->hw_stopped); } { unsigned char rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) - ret += sprintf(buf+ret, " xoff_detect:1"); + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) + seq_printf(m, " xoff_detect:1"); } #endif - - - if (info->icount.frame) - ret += sprintf(buf+ret, " fe:%lu", - (unsigned long)info->icount.frame); + seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); if (info->icount.parity) - ret += sprintf(buf+ret, " pe:%lu", - (unsigned long)info->icount.parity); + seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); if (info->icount.brk) - ret += sprintf(buf+ret, " brk:%lu", - (unsigned long)info->icount.brk); + seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); if (info->icount.overrun) - ret += sprintf(buf+ret, " oe:%lu", - (unsigned long)info->icount.overrun); + seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); /* * Last thing is the RS-232 status lines */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); - return ret; + if (!E100_RTS_GET(info)) + seq_puts(m, "|RTS"); + if (!E100_CTS_GET(info)) + seq_puts(m, "|CTS"); + if (!E100_DTR_GET(info)) + seq_puts(m, "|DTR"); + if (!E100_DSR_GET(info)) + seq_puts(m, "|DSR"); + if (!E100_CD_GET(info)) + seq_puts(m, "|CD"); + if (!E100_RI_GET(info)) + seq_puts(m, "|RI"); + seq_puts(m, "\n"); } -int rs_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) + +static int crisv10_proc_show(struct seq_file *m, void *v) { - int i, len = 0, l; - off_t begin = 0; + int i; - len += sprintf(page, "serinfo:1.0 driver:%s\n", - serial_version); - for (i = 0; i < NR_PORTS && len < 4000; i++) { + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + + for (i = 0; i < NR_PORTS; i++) { if (!rs_table[i].enabled) continue; - l = line_info(page + len, &rs_table[i]); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_line_info(m, &rs_table[i]); } #ifdef DEBUG_LOG_INCLUDED for (i = 0; i < debug_log_pos; i++) { - len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data)); - len += sprintf(page + len, debug_log[i].string, debug_log[i].value); - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_printf(m, "%-4i %lu.%lu ", + i, debug_log[i].time, + timer_data_to_ns(debug_log[i].timer_data)); + seq_printf(m, debug_log[i].string, debug_log[i].value); } - len += sprintf(page + len, "debug_log %i/%i %li bytes\n", - i, DEBUG_LOG_SIZE, begin+len); + seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); debug_log_pos = 0; #endif + return 0; +} - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); +static int crisv10_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, crisv10_proc_show, NULL); } +static const struct file_operations crisv10_proc_fops = { + .owner = THIS_MODULE, + .open = crisv10_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + + /* Finally, routines used to initialize the serial driver. */ -static void -show_serial_version(void) +static void show_serial_version(void) { printk(KERN_INFO - "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n", + "ETRAX 100LX serial-driver %s, " + "(c) 2000-2004 Axis Communications AB\r\n", &serial_version[11]); /* "$Revision: x.yy" */ } @@ -4425,13 +4407,14 @@ static const struct tty_operations rs_ops = { .break_ctl = rs_break, .send_xchar = rs_send_xchar, .wait_until_sent = rs_wait_until_sent, - .read_proc = rs_read_proc, .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset + .tiocmset = rs_tiocmset, +#ifdef CONFIG_PROC_FS + .proc_fops = &crisv10_proc_fops, +#endif }; -static int __init -rs_init(void) +static int __init rs_init(void) { int i; struct e100_serial *info; -- cgit v0.10.2 From a5fc1abe438b87a9d128beebc377f78e2681a76d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 30 Apr 2009 15:08:14 -0700 Subject: atomic: fix atomic_long_cmpxchg/xchg for 64 bit architectures On a linux-next allyesconfig build: kernel/trace/ring_buffer.c:1726: warning: passing argument 1 of 'atomic_cmpxchg' from incompatible pointer type linux-next/arch/s390/include/asm/atomic.h:112: note: expected 'struct atomic_t *' but argument is of type 'struct atomic64_t *' atomic_long_cmpxchg and atomic_long_xchg are incorrectly defined for 64 bit architectures. They should be mapped to the atomic64_* variants. Acked-by: Mathieu Desnoyers Signed-off-by: Heiko Carstens Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h index 7abdaa9..3673a13 100644 --- a/include/asm-generic/atomic.h +++ b/include/asm-generic/atomic.h @@ -132,9 +132,9 @@ static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u) #define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l)) #define atomic_long_cmpxchg(l, old, new) \ - (atomic_cmpxchg((atomic64_t *)(l), (old), (new))) + (atomic64_cmpxchg((atomic64_t *)(l), (old), (new))) #define atomic_long_xchg(v, new) \ - (atomic_xchg((atomic64_t *)(l), (new))) + (atomic64_xchg((atomic64_t *)(l), (new))) #else /* BITS_PER_LONG == 64 */ -- cgit v0.10.2 From b827e496c893de0c0f142abfaeb8730a2fd6b37f Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 30 Apr 2009 15:08:16 -0700 Subject: mm: close page_mkwrite races Change page_mkwrite to allow implementations to return with the page locked, and also change it's callers (in page fault paths) to hold the lock until the page is marked dirty. This allows the filesystem to have full control of page dirtying events coming from the VM. Rather than simply hold the page locked over the page_mkwrite call, we call page_mkwrite with the page unlocked and allow callers to return with it locked, so filesystems can avoid LOR conditions with page lock. The problem with the current scheme is this: a filesystem that wants to associate some metadata with a page as long as the page is dirty, will perform this manipulation in its ->page_mkwrite. It currently then must return with the page unlocked and may not hold any other locks (according to existing page_mkwrite convention). In this window, the VM could write out the page, clearing page-dirty. The filesystem has no good way to detect that a dirty pte is about to be attached, so it will happily write out the page, at which point, the filesystem may manipulate the metadata to reflect that the page is no longer dirty. It is not always possible to perform the required metadata manipulation in ->set_page_dirty, because that function cannot block or fail. The filesystem may need to allocate some data structure, for example. And the VM cannot mark the pte dirty before page_mkwrite, because page_mkwrite is allowed to fail, so we must not allow any window where the page could be written to if page_mkwrite does fail. This solution of holding the page locked over the 3 critical operations (page_mkwrite, setting the pte dirty, and finally setting the page dirty) closes out races nicely, preventing page cleaning for writeout being initiated in that window. This provides the filesystem with a strong synchronisation against the VM here. - Sage needs this race closed for ceph filesystem. - Trond for NFS (http://bugzilla.kernel.org/show_bug.cgi?id=12913). - I need it for fsblock. - I suspect other filesystems may need it too (eg. btrfs). - I have converted buffer.c to the new locking. Even simple block allocation under dirty pages might be susceptible to i_size changing under partial page at the end of file (we also have a buffer.c-side problem here, but it cannot be fixed properly without this patch). - Other filesystems (eg. NFS, maybe btrfs) will need to change their page_mkwrite functions themselves. [ This also moves page_mkwrite another step closer to fault, which should eventually allow page_mkwrite to be moved into ->fault, and thus avoiding a filesystem calldown and page lock/unlock cycle in __do_fault. ] [akpm@linux-foundation.org: fix derefs of NULL ->mapping] Cc: Sage Weil Cc: Trond Myklebust Signed-off-by: Nick Piggin Cc: Valdis Kletnieks Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 76efe5b..3120f8d 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -512,16 +512,24 @@ locking rules: BKL mmap_sem PageLocked(page) open: no yes close: no yes -fault: no yes -page_mkwrite: no yes no +fault: no yes can return with page locked +page_mkwrite: no yes can return with page locked access: no yes - ->page_mkwrite() is called when a previously read-only page is -about to become writeable. The file system is responsible for -protecting against truncate races. Once appropriate action has been -taking to lock out truncate, the page range should be verified to be -within i_size. The page mapping should also be checked that it is not -NULL. + ->fault() is called when a previously not present pte is about +to be faulted in. The filesystem must find and return the page associated +with the passed in "pgoff" in the vm_fault structure. If it is possible that +the page may be truncated and/or invalidated, then the filesystem must lock +the page, then ensure it is not already truncated (the page lock will block +subsequent truncate), and then return with VM_FAULT_LOCKED, and the page +locked. The VM will unlock the page. + + ->page_mkwrite() is called when a previously read-only pte is +about to become writeable. The filesystem again must ensure that there are +no truncate/invalidate races, and then return with the page locked. If +the page has been truncated, the filesystem should not look up a new page +like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which +will cause the VM to retry the fault. ->access() is called when get_user_pages() fails in acces_process_vm(), typically used to debug a process through diff --git a/fs/buffer.c b/fs/buffer.c index b3e5be7..aed2977 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -2397,7 +2397,8 @@ block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf, if ((page->mapping != inode->i_mapping) || (page_offset(page) > size)) { /* page got truncated out from underneath us */ - goto out_unlock; + unlock_page(page); + goto out; } /* page is wholly or partially inside EOF */ @@ -2411,14 +2412,15 @@ block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf, ret = block_commit_write(page, 0, end); if (unlikely(ret)) { + unlock_page(page); if (ret == -ENOMEM) ret = VM_FAULT_OOM; else /* -ENOSPC, -EIO, etc */ ret = VM_FAULT_SIGBUS; - } + } else + ret = VM_FAULT_LOCKED; -out_unlock: - unlock_page(page); +out: return ret; } diff --git a/mm/memory.c b/mm/memory.c index 6a4ef0f..4126dd1 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1971,6 +1971,15 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, ret = tmp; goto unwritable_page; } + if (unlikely(!(tmp & VM_FAULT_LOCKED))) { + lock_page(old_page); + if (!old_page->mapping) { + ret = 0; /* retry the fault */ + unlock_page(old_page); + goto unwritable_page; + } + } else + VM_BUG_ON(!PageLocked(old_page)); /* * Since we dropped the lock we need to revalidate @@ -1980,9 +1989,11 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, */ page_table = pte_offset_map_lock(mm, pmd, address, &ptl); - page_cache_release(old_page); - if (!pte_same(*page_table, orig_pte)) + if (!pte_same(*page_table, orig_pte)) { + unlock_page(old_page); + page_cache_release(old_page); goto unlock; + } page_mkwrite = 1; } @@ -2094,9 +2105,6 @@ gotten: unlock: pte_unmap_unlock(page_table, ptl); if (dirty_page) { - if (vma->vm_file) - file_update_time(vma->vm_file); - /* * Yes, Virginia, this is actually required to prevent a race * with clear_page_dirty_for_io() from clearing the page dirty @@ -2105,16 +2113,41 @@ unlock: * * do_no_page is protected similarly. */ - wait_on_page_locked(dirty_page); - set_page_dirty_balance(dirty_page, page_mkwrite); + if (!page_mkwrite) { + wait_on_page_locked(dirty_page); + set_page_dirty_balance(dirty_page, page_mkwrite); + } put_page(dirty_page); + if (page_mkwrite) { + struct address_space *mapping = dirty_page->mapping; + + set_page_dirty(dirty_page); + unlock_page(dirty_page); + page_cache_release(dirty_page); + if (mapping) { + /* + * Some device drivers do not set page.mapping + * but still dirty their pages + */ + balance_dirty_pages_ratelimited(mapping); + } + } + + /* file_update_time outside page_lock */ + if (vma->vm_file) + file_update_time(vma->vm_file); } return ret; oom_free_new: page_cache_release(new_page); oom: - if (old_page) + if (old_page) { + if (page_mkwrite) { + unlock_page(old_page); + page_cache_release(old_page); + } page_cache_release(old_page); + } return VM_FAULT_OOM; unwritable_page: @@ -2664,27 +2697,22 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma, int tmp; unlock_page(page); - vmf.flags |= FAULT_FLAG_MKWRITE; + vmf.flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE; tmp = vma->vm_ops->page_mkwrite(vma, &vmf); if (unlikely(tmp & (VM_FAULT_ERROR | VM_FAULT_NOPAGE))) { ret = tmp; - anon = 1; /* no anon but release vmf.page */ - goto out_unlocked; - } - lock_page(page); - /* - * XXX: this is not quite right (racy vs - * invalidate) to unlock and relock the page - * like this, however a better fix requires - * reworking page_mkwrite locking API, which - * is better done later. - */ - if (!page->mapping) { - ret = 0; - anon = 1; /* no anon but release vmf.page */ - goto out; + goto unwritable_page; } + if (unlikely(!(tmp & VM_FAULT_LOCKED))) { + lock_page(page); + if (!page->mapping) { + ret = 0; /* retry the fault */ + unlock_page(page); + goto unwritable_page; + } + } else + VM_BUG_ON(!PageLocked(page)); page_mkwrite = 1; } } @@ -2736,19 +2764,35 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma, pte_unmap_unlock(page_table, ptl); out: - unlock_page(vmf.page); -out_unlocked: - if (anon) - page_cache_release(vmf.page); - else if (dirty_page) { - if (vma->vm_file) - file_update_time(vma->vm_file); + if (dirty_page) { + struct address_space *mapping = page->mapping; - set_page_dirty_balance(dirty_page, page_mkwrite); + if (set_page_dirty(dirty_page)) + page_mkwrite = 1; + unlock_page(dirty_page); put_page(dirty_page); + if (page_mkwrite && mapping) { + /* + * Some device drivers do not set page.mapping but still + * dirty their pages + */ + balance_dirty_pages_ratelimited(mapping); + } + + /* file_update_time outside page_lock */ + if (vma->vm_file) + file_update_time(vma->vm_file); + } else { + unlock_page(vmf.page); + if (anon) + page_cache_release(vmf.page); } return ret; + +unwritable_page: + page_cache_release(page); + return ret; } static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma, -- cgit v0.10.2 From 0816178638c15ce5472d39d771a96860dff4141a Mon Sep 17 00:00:00 2001 From: Vitaly Mayatskikh Date: Thu, 30 Apr 2009 15:08:18 -0700 Subject: pagemap: require aligned-length, non-null reads of /proc/pid/pagemap The intention of commit aae8679b0ebcaa92f99c1c3cb0cd651594a43915 ("pagemap: fix bug in add_to_pagemap, require aligned-length reads of /proc/pid/pagemap") was to force reads of /proc/pid/pagemap to be a multiple of 8 bytes, but now it allows to read 0 bytes, which actually puts some data to user's buffer. According to POSIX, if count is zero, read() should return zero and has no other results. Signed-off-by: Vitaly Mayatskikh Cc: Thomas Tuttle Acked-by: Matt Mackall Cc: Alexey Dobriyan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 39e4ad4..6f61b7c 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -665,6 +665,10 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, goto out_task; ret = 0; + + if (!count) + goto out_task; + mm = get_task_mm(task); if (!mm) goto out_task; -- cgit v0.10.2 From ae3abae64f177586be55b04a7fb7047a34b21a3e Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Thu, 30 Apr 2009 15:08:19 -0700 Subject: memcg: fix mem_cgroup_shrink_usage() Current mem_cgroup_shrink_usage() has two problems. 1. It doesn't call mem_cgroup_out_of_memory and doesn't update last_oom_jiffies, so pagefault_out_of_memory invokes global OOM. 2. Considering hierarchy, shrinking has to be done from the mem_over_limit, not from the memcg which the page would be charged to. mem_cgroup_try_charge_swapin() does all of these things properly, so we use it and call cancel_charge_swapin when it succeeded. The name of "shrink_usage" is not appropriate for this behavior, so we change it too. Signed-off-by: Daisuke Nishimura Acked-by: KAMEZAWA Hiroyuki Cc: Li Zefan Cc: Paul Menage Cc: Dhaval Giani Cc: Daisuke Nishimura Cc: YAMAMOTO Takashi Cc: KOSAKI Motohiro Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index a9e3b76..25b9ca9 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -56,7 +56,7 @@ extern void mem_cgroup_move_lists(struct page *page, enum lru_list from, enum lru_list to); extern void mem_cgroup_uncharge_page(struct page *page); extern void mem_cgroup_uncharge_cache_page(struct page *page); -extern int mem_cgroup_shrink_usage(struct page *page, +extern int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask); extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan, @@ -155,7 +155,7 @@ static inline void mem_cgroup_uncharge_cache_page(struct page *page) { } -static inline int mem_cgroup_shrink_usage(struct page *page, +static inline int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask) { return 0; diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 575203a..01c2d8f 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1617,37 +1617,28 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem, } /* - * A call to try to shrink memory usage under specified resource controller. - * This is typically used for page reclaiming for shmem for reducing side - * effect of page allocation from shmem, which is used by some mem_cgroup. + * A call to try to shrink memory usage on charge failure at shmem's swapin. + * Calling hierarchical_reclaim is not enough because we should update + * last_oom_jiffies to prevent pagefault_out_of_memory from invoking global OOM. + * Moreover considering hierarchy, we should reclaim from the mem_over_limit, + * not from the memcg which this page would be charged to. + * try_charge_swapin does all of these works properly. */ -int mem_cgroup_shrink_usage(struct page *page, +int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask) { struct mem_cgroup *mem = NULL; - int progress = 0; - int retry = MEM_CGROUP_RECLAIM_RETRIES; + int ret; if (mem_cgroup_disabled()) return 0; - if (page) - mem = try_get_mem_cgroup_from_swapcache(page); - if (!mem && mm) - mem = try_get_mem_cgroup_from_mm(mm); - if (unlikely(!mem)) - return 0; - do { - progress = mem_cgroup_hierarchical_reclaim(mem, - gfp_mask, true, false); - progress += mem_cgroup_check_under_limit(mem); - } while (!progress && --retry); + ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem); + if (!ret) + mem_cgroup_cancel_charge_swapin(mem); /* it does !mem check */ - css_put(&mem->css); - if (!retry) - return -ENOMEM; - return 0; + return ret; } static DEFINE_MUTEX(set_limit_mutex); diff --git a/mm/shmem.c b/mm/shmem.c index f9cb20e..b25f95c 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1340,8 +1340,12 @@ repeat: shmem_swp_unmap(entry); spin_unlock(&info->lock); if (error == -ENOMEM) { - /* allow reclaim from this memory cgroup */ - error = mem_cgroup_shrink_usage(swappage, + /* + * reclaim from proper memory cgroup and + * call memcg's OOM if needed. + */ + error = mem_cgroup_shmem_charge_fallback( + swappage, current->mm, gfp); if (error) { -- cgit v0.10.2 From b175dc09285b36200a83b78baf167905181fb4e5 Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Thu, 30 Apr 2009 15:08:44 -0700 Subject: vgacon: return the upper half of 512 character fonts Uwe Geuder noted that he gets random bitmaps on a text console if he tried to type extended characters (like the e acute). For him everything above unicode 0xa0 was corrupted. After some digging there seems to be a little culprit in vgacon since the beginning of ages (well git). The function vgacon_font_get will store the number of characters correctly in font->charcount but then calls to vgacon_do_font_op(..., 0, 0). Which means only the lower 256 characters are actually stored to the fontdata. The rest is left untouched. So the next time that saved data is used, the garbled font appears. This happens on every switch between text consoles. Addresses https://bugs.launchpad.net/ubuntu/+source/linux/+bug/355057 Signed-off-by: Stefan Bader Tested-by: Uwe Geuder Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index d012edd..38e86b8 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1282,7 +1282,7 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font) font->charcount = vga_512_chars ? 512 : 256; if (!font->data) return 0; - return vgacon_do_font_op(&state, font->data, 0, 0); + return vgacon_do_font_op(&state, font->data, 0, vga_512_chars); } #else -- cgit v0.10.2 From 1ffb1c0c64b4a2b75eed1f63cc47f2beb711c92f Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:45 -0700 Subject: alpha: titan and marvel build fixes These platforms got broken after u64 => 'long long' conversion. Apparently that change was compile-tested with 'make allmodconfig', but it doesn't include systems that depend on !ALPHA_LEGACY_START_ADDRESS. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c index 985e5c1..8ca6345 100644 --- a/arch/alpha/kernel/err_ev6.c +++ b/arch/alpha/kernel/err_ev6.c @@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print) } void -ev6_machine_check(u64 vector, u64 la_ptr) +ev6_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c index 73770c6..d738a67 100644 --- a/arch/alpha/kernel/err_ev7.c +++ b/arch/alpha/kernel/err_ev7.c @@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr, } void -ev7_machine_check(u64 vector, u64 la_ptr) +ev7_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; char *saved_err_prefix = err_print_prefix; @@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header) switch(header->type) { case EL_TYPE__PAL__LOGOUT_FRAME: - printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n", + printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n", err_print_prefix, packet->by_type.logout.whami, packet->by_type.logout.rbox_whami); diff --git a/arch/alpha/kernel/err_impl.h b/arch/alpha/kernel/err_impl.h index 3c12258..0c010ca 100644 --- a/arch/alpha/kernel/err_impl.h +++ b/arch/alpha/kernel/err_impl.h @@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets * ev7_collect_logout_frame_subpackets(struct el_subpacket *, struct ev7_lf_subpackets *); extern void ev7_register_error_handlers(void); -extern void ev7_machine_check(u64, u64); +extern void ev7_machine_check(unsigned long, unsigned long); /* * err_ev6.c */ extern void ev6_register_error_handlers(void); extern int ev6_process_logout_frame(struct el_common *, int); -extern void ev6_machine_check(u64, u64); +extern void ev6_machine_check(unsigned long, unsigned long); /* * err_marvel.c */ -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_register_error_handlers(void); /* * err_titan.c */ extern int titan_process_logout_frame(struct el_common *, int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_register_error_handlers(void); extern int privateer_process_logout_frame(struct el_common *, int); -extern void privateer_machine_check(u64, u64); +extern void privateer_machine_check(unsigned long, unsigned long); diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c index 6bfd243..52a79df 100644 --- a/arch/alpha/kernel/err_marvel.c +++ b/arch/alpha/kernel/err_marvel.c @@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print) } void -marvel_machine_check(u64 vector, u64 la_ptr) +marvel_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL; diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c index c7e28a8..f7ed97c 100644 --- a/arch/alpha/kernel/err_titan.c +++ b/arch/alpha/kernel/err_titan.c @@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print) } void -titan_machine_check(u64 vector, u64 la_ptr) +titan_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = @@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print) } void -privateer_machine_check(u64 vector, u64 la_ptr) +privateer_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h index 567f259..3d2627e 100644 --- a/arch/alpha/kernel/proto.h +++ b/arch/alpha/kernel/proto.h @@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops irongate_pci_ops; extern int irongate_pci_clr_err(void); extern void irongate_init_arch(void); -extern void irongate_machine_check(u64, u64); #define irongate_pci_tbi ((void *)0) /* core_lca.c */ @@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops marvel_pci_ops; extern void marvel_init_arch(void); extern void marvel_kill_arch(int); -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern int marvel_pa_to_nid(unsigned long); extern int marvel_cpuid_to_nid(int); @@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops titan_pci_ops; extern void titan_init_arch(void); extern void titan_kill_arch(int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct _alpha_agp_info *titan_agp_info(void); -- cgit v0.10.2 From 08a42e86bce511b45ca3eee40f51674b02a777d1 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:47 -0700 Subject: alpha: exception table sorting Exception fixups for sections other than .text (like one in futex_init()) break the natural ordering of fixup entries, so sorting is required. Without that the result of the exception table search depends on phase of the moon. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index 163f305..b49ec2f 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -507,5 +507,7 @@ struct exception_table_entry (pc) + (_fixup)->fixup.bits.nextinsn; \ }) +#define ARCH_HAS_SORT_EXTABLE +#define ARCH_HAS_SEARCH_EXTABLE #endif /* __ALPHA_UACCESS_H */ diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c index dc7aeda..62dc379 100644 --- a/arch/alpha/mm/extable.c +++ b/arch/alpha/mm/extable.c @@ -3,11 +3,49 @@ */ #include +#include #include +static inline unsigned long ex_to_addr(const struct exception_table_entry *x) +{ + return (unsigned long)&x->insn + x->insn; +} + +static void swap_ex(void *a, void *b, int size) +{ + struct exception_table_entry *ex_a = a, *ex_b = b; + unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b); + unsigned int t = ex_a->fixup.unit; + + ex_a->fixup.unit = ex_b->fixup.unit; + ex_b->fixup.unit = t; + ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn); + ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn); +} + +/* + * The exception table needs to be sorted so that the binary + * search that we use to find entries in it works properly. + * This is used both for the kernel exception table and for + * the exception tables of modules that get loaded. + */ +static int cmp_ex(const void *a, const void *b) +{ + const struct exception_table_entry *x = a, *y = b; + + /* avoid overflow */ + if (ex_to_addr(x) > ex_to_addr(y)) + return 1; + if (ex_to_addr(x) < ex_to_addr(y)) + return -1; + return 0; +} + void sort_extable(struct exception_table_entry *start, struct exception_table_entry *finish) { + sort(start, finish - start, sizeof(struct exception_table_entry), + cmp_ex, swap_ex); } const struct exception_table_entry * @@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first, unsigned long mid_value; mid = (last - first) / 2 + first; - mid_value = (unsigned long)&mid->insn + mid->insn; + mid_value = ex_to_addr(mid); if (mid_value == value) return mid; else if (mid_value < value) -- cgit v0.10.2 From 77b4cf5cb0c9d6010a18030a0e0a8d2aaf6b43ec Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:48 -0700 Subject: alpha: futex implementation Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h index ac78eba..ce8860a 100644 --- a/arch/alpha/include/asm/barrier.h +++ b/arch/alpha/include/asm/barrier.h @@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory") __asm__ __volatile__("mb": : :"memory") #ifdef CONFIG_SMP +#define __ASM_SMP_MB "\tmb\n" #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() #define smp_read_barrier_depends() read_barrier_depends() #else +#define __ASM_SMP_MB #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h index 6a332a9..945de22 100644 --- a/arch/alpha/include/asm/futex.h +++ b/arch/alpha/include/asm/futex.h @@ -1,6 +1,116 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef _ASM_ALPHA_FUTEX_H +#define _ASM_ALPHA_FUTEX_H -#include +#ifdef __KERNEL__ -#endif +#include +#include +#include +#include + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile__( \ + __ASM_SMP_MB \ + "1: ldl_l %0,0(%2)\n" \ + insn \ + "2: stl_c %1,0(%2)\n" \ + " beq %1,4f\n" \ + " mov $31,%1\n" \ + "3: .subsection 2\n" \ + "4: br 1b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .long 1b-.\n" \ + " lda $31,3b-1b(%1)\n" \ + " .long 2b-.\n" \ + " lda $31,3b-2b(%1)\n" \ + " .previous\n" \ + : "=&r" (oldval), "=&r"(ret) \ + : "r" (uaddr), "r"(oparg) \ + : "memory") + +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int prev, cmp; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + __asm__ __volatile__ ( + __ASM_SMP_MB + "1: ldl_l %0,0(%2)\n" + " cmpeq %0,%3,%1\n" + " beq %1,3f\n" + " mov %4,%1\n" + "2: stl_c %1,0(%2)\n" + " beq %1,4f\n" + "3: .subsection 2\n" + "4: br 1b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + " .long 1b-.\n" + " lda $31,3b-1b(%0)\n" + " .long 2b-.\n" + " lda $31,3b-2b(%0)\n" + " .previous\n" + : "=&r"(prev), "=&r"(cmp) + : "r"(uaddr), "r"((long)oldval), "r"(newval) + : "memory"); + + return prev; +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_ALPHA_FUTEX_H */ -- cgit v0.10.2 From 74641f584da8eccf30becfbb5507ab457187db22 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:49 -0700 Subject: alpha: binfmt_aout fix This fixes the problem introduced by commit 3bfacef412 (get rid of special-casing the /sbin/loader on alpha): osf/1 ecoff binary segfaults when binfmt_aout built as module. That happens because aout binary handler gets on the top of the binfmt list due to late registration, and kernel attempts to execute the binary without preparatory work that must be done by binfmt_loader. Fixed by changing the registration order of the default binfmt handlers using list_add_tail() and introducing insert_binfmt() function which places new handler on the top of the binfmt list. This might be generally useful for installing arch-specific frontends for default handlers or just for overriding them. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile index a427538..7739a62 100644 --- a/arch/alpha/kernel/Makefile +++ b/arch/alpha/kernel/Makefile @@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compare obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ - alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o + alpha_ksyms.o systbls.o err_common.o io.o obj-$(CONFIG_VGA_HOSE) += console.o obj-$(CONFIG_SMP) += smp.o @@ -43,6 +43,10 @@ else # Misc support obj-$(CONFIG_ALPHA_SRM) += srmcons.o +ifdef CONFIG_BINFMT_AOUT +obj-y += binfmt_loader.o +endif + # Core logic support obj-$(CONFIG_ALPHA_APECS) += core_apecs.o obj-$(CONFIG_ALPHA_CIA) += core_cia.o diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c index 4a0af90..3fcfad4 100644 --- a/arch/alpha/kernel/binfmt_loader.c +++ b/arch/alpha/kernel/binfmt_loader.c @@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = { static int __init init_loader_binfmt(void) { - return register_binfmt(&loader_format); + return insert_binfmt(&loader_format); } arch_initcall(init_loader_binfmt); diff --git a/fs/exec.c b/fs/exec.c index a3a8ce8..639177b 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -69,17 +69,18 @@ int suid_dumpable = 0; static LIST_HEAD(formats); static DEFINE_RWLOCK(binfmt_lock); -int register_binfmt(struct linux_binfmt * fmt) +int __register_binfmt(struct linux_binfmt * fmt, int insert) { if (!fmt) return -EINVAL; write_lock(&binfmt_lock); - list_add(&fmt->lh, &formats); + insert ? list_add(&fmt->lh, &formats) : + list_add_tail(&fmt->lh, &formats); write_unlock(&binfmt_lock); return 0; } -EXPORT_SYMBOL(register_binfmt); +EXPORT_SYMBOL(__register_binfmt); void unregister_binfmt(struct linux_binfmt * fmt) { diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 6638b81..61ee18c 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -82,7 +82,19 @@ struct linux_binfmt { int hasvdso; }; -extern int register_binfmt(struct linux_binfmt *); +extern int __register_binfmt(struct linux_binfmt *fmt, int insert); + +/* Registration of default binfmt handlers */ +static inline int register_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 0); +} +/* Same as above, but adds a new binfmt at the top of the list */ +static inline int insert_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 1); +} + extern void unregister_binfmt(struct linux_binfmt *); extern int prepare_binprm(struct linux_binprm *); -- cgit v0.10.2 From 0763ed2355198cdef2f6a2098e9d52eb1fe4365d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 30 Apr 2009 15:08:50 -0700 Subject: of: make of_(un)register_platform_driver common code Some drivers using of_register_platform_driver() wrapper break on sparc because the wrapper isn't in the header file. This patch moves it from Microblaze and PowerPC implementations and makes it common code. Fixes this sparc64 allmodconfig build error (at least): drivers/leds/leds-gpio.c: In function `gpio_led_init': drivers/leds/leds-gpio.c:295: error: implicit declaration of function `of_register_platform_driver' drivers/leds/leds-gpio.c: In function `gpio_led_exit': drivers/leds/leds-gpio.c:311: error: implicit declaration of function `of_unregister_platform_driver' Signed-off-by: Grant Likely Acked-by: David S. Miller Cc: Michal Simek Cc: Benjamin Herrenschmidt Cc: Stephen Rothwell Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h index 187c0ee..3749127 100644 --- a/arch/microblaze/include/asm/of_platform.h +++ b/arch/microblaze/include/asm/of_platform.h @@ -36,16 +36,6 @@ static const struct of_device_id of_default_bus_ids[] = { {}, }; -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h index 53b4650..d4aaa34 100644 --- a/arch/powerpc/include/asm/of_platform.h +++ b/arch/powerpc/include/asm/of_platform.h @@ -11,16 +11,6 @@ * */ -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3d327b6..9084066 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -51,6 +51,16 @@ extern int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus); extern void of_unregister_driver(struct of_platform_driver *drv); +/* Platform drivers register/unregister */ +static inline int of_register_platform_driver(struct of_platform_driver *drv) +{ + return of_register_driver(drv, &of_platform_bus_type); +} +static inline void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + of_unregister_driver(drv); +} + #include extern struct of_device *of_find_device_by_node(struct device_node *np); -- cgit v0.10.2 From 00a62ce91e554198ef28234c91c36f850f5a3bc9 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 30 Apr 2009 15:08:51 -0700 Subject: mm: fix Committed_AS underflow on large NR_CPUS environment The Committed_AS field can underflow in certain situations: > # while true; do cat /proc/meminfo | grep _AS; sleep 1; done | uniq -c > 1 Committed_AS: 18446744073709323392 kB > 11 Committed_AS: 18446744073709455488 kB > 6 Committed_AS: 35136 kB > 5 Committed_AS: 18446744073709454400 kB > 7 Committed_AS: 35904 kB > 3 Committed_AS: 18446744073709453248 kB > 2 Committed_AS: 34752 kB > 9 Committed_AS: 18446744073709453248 kB > 8 Committed_AS: 34752 kB > 3 Committed_AS: 18446744073709320960 kB > 7 Committed_AS: 18446744073709454080 kB > 3 Committed_AS: 18446744073709320960 kB > 5 Committed_AS: 18446744073709454080 kB > 6 Committed_AS: 18446744073709320960 kB Because NR_CPUS can be greater than 1000 and meminfo_proc_show() does not check for underflow. But NR_CPUS proportional isn't good calculation. In general, possibility of lock contention is proportional to the number of online cpus, not theorical maximum cpus (NR_CPUS). The current kernel has generic percpu-counter stuff. using it is right way. it makes code simplify and percpu_counter_read_positive() don't make underflow issue. Reported-by: Dave Hansen Signed-off-by: KOSAKI Motohiro Cc: Eric B Munson Cc: Mel Gorman Cc: Christoph Lameter Cc: [All kernel versions] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c index 74ea974..c6b0302 100644 --- a/fs/proc/meminfo.c +++ b/fs/proc/meminfo.c @@ -35,7 +35,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v) #define K(x) ((x) << (PAGE_SHIFT - 10)) si_meminfo(&i); si_swapinfo(&i); - committed = atomic_long_read(&vm_committed_space); + committed = percpu_counter_read_positive(&vm_committed_as); allowed = ((totalram_pages - hugetlb_total_pages()) * sysctl_overcommit_ratio / 100) + total_swap_pages; diff --git a/include/linux/mman.h b/include/linux/mman.h index 30d1073..9872d6c 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -12,21 +12,18 @@ #ifdef __KERNEL__ #include +#include #include extern int sysctl_overcommit_memory; extern int sysctl_overcommit_ratio; -extern atomic_long_t vm_committed_space; +extern struct percpu_counter vm_committed_as; -#ifdef CONFIG_SMP -extern void vm_acct_memory(long pages); -#else static inline void vm_acct_memory(long pages) { - atomic_long_add(pages, &vm_committed_space); + percpu_counter_add(&vm_committed_as, pages); } -#endif static inline void vm_unacct_memory(long pages) { diff --git a/mm/mmap.c b/mm/mmap.c index 3303d1b..6b7b1a9 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -85,7 +85,7 @@ EXPORT_SYMBOL(vm_get_page_prot); int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT; -atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0); +struct percpu_counter vm_committed_as; /* * Check that a process has enough memory to allocate a new virtual @@ -179,11 +179,7 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) if (mm) allowed -= mm->total_vm / 32; - /* - * cast `allowed' as a signed long because vm_committed_space - * sometimes has a negative value - */ - if (atomic_long_read(&vm_committed_space) < (long)allowed) + if (percpu_counter_read_positive(&vm_committed_as) < allowed) return 0; error: vm_unacct_memory(pages); @@ -2481,4 +2477,8 @@ void mm_drop_all_locks(struct mm_struct *mm) */ void __init mmap_init(void) { + int ret; + + ret = percpu_counter_init(&vm_committed_as, 0); + VM_BUG_ON(ret); } diff --git a/mm/nommu.c b/mm/nommu.c index 72eda4a..809998a 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -62,7 +62,7 @@ void *high_memory; struct page *mem_map; unsigned long max_mapnr; unsigned long num_physpages; -atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0); +struct percpu_counter vm_committed_as; int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT; @@ -463,6 +463,10 @@ SYSCALL_DEFINE1(brk, unsigned long, brk) */ void __init mmap_init(void) { + int ret; + + ret = percpu_counter_init(&vm_committed_as, 0); + VM_BUG_ON(ret); vm_region_jar = KMEM_CACHE(vm_region, SLAB_PANIC); } @@ -1847,12 +1851,9 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) if (mm) allowed -= mm->total_vm / 32; - /* - * cast `allowed' as a signed long because vm_committed_space - * sometimes has a negative value - */ - if (atomic_long_read(&vm_committed_space) < (long)allowed) + if (percpu_counter_read_positive(&vm_committed_as) < allowed) return 0; + error: vm_unacct_memory(pages); diff --git a/mm/swap.c b/mm/swap.c index bede23c..cb29ae5 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -491,49 +491,6 @@ unsigned pagevec_lookup_tag(struct pagevec *pvec, struct address_space *mapping, EXPORT_SYMBOL(pagevec_lookup_tag); -#ifdef CONFIG_SMP -/* - * We tolerate a little inaccuracy to avoid ping-ponging the counter between - * CPUs - */ -#define ACCT_THRESHOLD max(16, NR_CPUS * 2) - -static DEFINE_PER_CPU(long, committed_space); - -void vm_acct_memory(long pages) -{ - long *local; - - preempt_disable(); - local = &__get_cpu_var(committed_space); - *local += pages; - if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) { - atomic_long_add(*local, &vm_committed_space); - *local = 0; - } - preempt_enable(); -} - -#ifdef CONFIG_HOTPLUG_CPU - -/* Drop the CPU's cached committed space back into the central pool. */ -static int cpu_swap_callback(struct notifier_block *nfb, - unsigned long action, - void *hcpu) -{ - long *committed; - - committed = &per_cpu(committed_space, (long)hcpu); - if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) { - atomic_long_add(*committed, &vm_committed_space); - *committed = 0; - drain_cpu_pagevecs((long)hcpu); - } - return NOTIFY_OK; -} -#endif /* CONFIG_HOTPLUG_CPU */ -#endif /* CONFIG_SMP */ - /* * Perform any setup for the swap system */ @@ -554,7 +511,4 @@ void __init swap_setup(void) * Right now other parts of the system means that we * _really_ don't want to cluster much more */ -#ifdef CONFIG_HOTPLUG_CPU - hotcpu_notifier(cpu_swap_callback, 0); -#endif } -- cgit v0.10.2 From 52dc5aec9fe2eb591f1490278ae767448860118b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 30 Apr 2009 15:08:53 -0700 Subject: kernel-doc: restrict syntax for private: and public: scripts/kernel-doc can (incorrectly) delete struct members that are surrounded by /* ... */ /* ... */ if there is a /* private: */ comment in there somewhere also. Fix that by making the "/* private:" only allow whitespace between /* and "private:", not anything/everything in the world. This fixes some erroneous kernel-doc warnings that popped up while processing include/linux/usb/composite.h. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 026ec7d..4d04572 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants. Inside a struct description, you can use the "private:" and "public:" comment tags. Structure fields that are inside a "private:" area -are not listed in the generated output documentation. +are not listed in the generated output documentation. The "private:" +and "public:" tags must begin immediately following a "/*" comment +marker. They may optionally include comments between the ":" and the +ending "*/" marker. Example: @@ -283,7 +286,7 @@ Example: struct my_struct { int a; int b; -/* private: */ +/* private: internal use only */ int c; }; diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 0f11870..3208a3a 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1411,7 +1411,8 @@ sub dump_struct($$) { my $file = shift; my $nested; - if ($x =~/(struct|union)\s+(\w+)\s*{(.*)}/) { + if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) { + #my $decl_type = $1; $declaration_name = $2; my $members = $3; @@ -1420,8 +1421,8 @@ sub dump_struct($$) { $nested = $1; # ignore members marked private: - $members =~ s/\/\*.*?private:.*?public:.*?\*\///gos; - $members =~ s/\/\*.*?private:.*//gos; + $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos; + $members =~ s/\/\*\s*private:.*//gos; # strip comments: $members =~ s/\/\*.*?\*\///gos; $nested =~ s/\/\*.*?\*\///gos; -- cgit v0.10.2 From 0ae05fb254a5f2617fc8fcfff7be959b54a5e963 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 30 Apr 2009 15:08:54 -0700 Subject: ptrace: s/parent/real_parent/ in binfmt_elf_fdpic.c ->real_parent is the parent. ->parent may be the tracer. Signed-off-by: Oleg Nesterov Acked-by: David Howells Acked-by: Roland McGrath Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 70cfc4b..fdb66fa 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -1388,7 +1388,7 @@ static void fill_prstatus(struct elf_prstatus *prstatus, prstatus->pr_sigpend = p->pending.signal.sig[0]; prstatus->pr_sighold = p->blocked.sig[0]; prstatus->pr_pid = task_pid_vnr(p); - prstatus->pr_ppid = task_pid_vnr(p->parent); + prstatus->pr_ppid = task_pid_vnr(p->real_parent); prstatus->pr_pgrp = task_pgrp_vnr(p); prstatus->pr_sid = task_session_vnr(p); if (thread_group_leader(p)) { @@ -1433,7 +1433,7 @@ static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p, psinfo->pr_psargs[len] = 0; psinfo->pr_pid = task_pid_vnr(p); - psinfo->pr_ppid = task_pid_vnr(p->parent); + psinfo->pr_ppid = task_pid_vnr(p->real_parent); psinfo->pr_pgrp = task_pgrp_vnr(p); psinfo->pr_sid = task_session_vnr(p); -- cgit v0.10.2 From 8713e01295140f674a41f2199b0f7ca99dfb69d5 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 30 Apr 2009 15:08:55 -0700 Subject: vmscan: avoid multiplication overflow in shrink_zone() Local variable `scan' can overflow on zones which are larger than (2G * 4k) / 100 = 80GB. Making it 64-bit on 64-bit will fix that up. Cc: KOSAKI Motohiro Cc: Wu Fengguang Cc: Peter Zijlstra Cc: Rik van Riel Cc: Lee Schermerhorn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index eac9577..5fa3eda 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1471,7 +1471,7 @@ static void shrink_zone(int priority, struct zone *zone, for_each_evictable_lru(l) { int file = is_file_lru(l); - int scan; + unsigned long scan; scan = zone_nr_pages(zone, sc, l); if (priority) { -- cgit v0.10.2 From 9e4a5bda89034502fb144331e71a0efdfd5fae97 Mon Sep 17 00:00:00 2001 From: Andrea Righi Date: Thu, 30 Apr 2009 15:08:57 -0700 Subject: mm: prevent divide error for small values of vm_dirty_bytes Avoid setting less than two pages for vm_dirty_bytes: this is necessary to avoid potential division by 0 (like the following) in get_dirty_limits(). [ 49.951610] divide error: 0000 [#1] PREEMPT SMP [ 49.952195] last sysfs file: /sys/devices/pci0000:00/0000:00:01.1/host0/target0:0:0/0:0:0:0/block/sda/uevent [ 49.952195] CPU 1 [ 49.952195] Modules linked in: pcspkr [ 49.952195] Pid: 3064, comm: dd Not tainted 2.6.30-rc3 #1 [ 49.952195] RIP: 0010:[] [] get_dirty_limits+0xe9/0x2c0 [ 49.952195] RSP: 0018:ffff88001de03a98 EFLAGS: 00010202 [ 49.952195] RAX: 00000000000000c0 RBX: ffff88001de03b80 RCX: 28f5c28f5c28f5c3 [ 49.952195] RDX: 0000000000000000 RSI: 00000000000000c0 RDI: 0000000000000000 [ 49.952195] RBP: ffff88001de03ae8 R08: 0000000000000000 R09: 0000000000000000 [ 49.952195] R10: ffff88001ddda9a0 R11: 0000000000000001 R12: 0000000000000001 [ 49.952195] R13: ffff88001fbc8218 R14: ffff88001de03b70 R15: ffff88001de03b78 [ 49.952195] FS: 00007fe9a435b6f0(0000) GS:ffff8800025d9000(0000) knlGS:0000000000000000 [ 49.952195] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 49.952195] CR2: 00007fe9a39ab000 CR3: 000000001de38000 CR4: 00000000000006e0 [ 49.952195] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 49.952195] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 49.952195] Process dd (pid: 3064, threadinfo ffff88001de02000, task ffff88001ddda250) [ 49.952195] Stack: [ 49.952195] ffff88001fa0de00 ffff88001f2dbd70 ffff88001f9fe800 000080b900000000 [ 49.952195] 00000000000000c0 ffff8800027a6100 0000000000000400 ffff88001fbc8218 [ 49.952195] 0000000000000000 0000000000000600 ffff88001de03bb8 ffffffff802d3ed7 [ 49.952195] Call Trace: [ 49.952195] [] balance_dirty_pages_ratelimited_nr+0x1d7/0x3f0 [ 49.952195] [] ? ext3_writeback_write_end+0x9e/0x120 [ 49.952195] [] generic_file_buffered_write+0x12f/0x330 [ 49.952195] [] __generic_file_aio_write_nolock+0x26d/0x460 [ 49.952195] [] ? generic_file_aio_write+0x52/0xd0 [ 49.952195] [] generic_file_aio_write+0x69/0xd0 [ 49.952195] [] ext3_file_write+0x26/0xc0 [ 49.952195] [] do_sync_write+0xf1/0x140 [ 49.952195] [] ? get_lock_stats+0x2a/0x60 [ 49.952195] [] ? autoremove_wake_function+0x0/0x40 [ 49.952195] [] vfs_write+0xcb/0x190 [ 49.952195] [] sys_write+0x50/0x90 [ 49.952195] [] system_call_fastpath+0x16/0x1b [ 49.952195] Code: 00 00 00 2b 05 09 1c 17 01 48 89 c6 49 0f af f4 48 c1 ee 02 48 89 f0 48 f7 e1 48 89 d6 31 d2 48 c1 ee 02 48 0f af 75 d0 48 89 f0 <48> f7 f7 41 8b 95 ac 01 00 00 48 89 c7 49 0f af d4 48 c1 ea 02 [ 49.952195] RIP [] get_dirty_limits+0xe9/0x2c0 [ 49.952195] RSP [ 50.096523] ---[ end trace 008d7aa02f244d7b ]--- Signed-off-by: Andrea Righi Cc: Peter Zijlstra Cc: David Rientjes Cc: Dave Chinner Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 97c4b32..b716d33 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -90,6 +90,10 @@ will itself start writeback. If dirty_bytes is written, dirty_ratio becomes a function of its value (dirty_bytes / the amount of dirtyable system memory). +Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any +value lower than this limit will be ignored and the old configuration will be +retained. + ============================================================== dirty_expire_centisecs diff --git a/kernel/sysctl.c b/kernel/sysctl.c index e3d2c7d..ea78fa1 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -103,6 +103,9 @@ static unsigned long one_ul = 1; static int one_hundred = 100; static int one_thousand = 1000; +/* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */ +static unsigned long dirty_bytes_min = 2 * PAGE_SIZE; + /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */ static int maxolduid = 65535; static int minolduid; @@ -1006,7 +1009,7 @@ static struct ctl_table vm_table[] = { .mode = 0644, .proc_handler = &dirty_bytes_handler, .strategy = &sysctl_intvec, - .extra1 = &one_ul, + .extra1 = &dirty_bytes_min, }, { .procname = "dirty_writeback_centisecs", -- cgit v0.10.2 From 65fd21058a791f35aff11eeccd2e270f0faf11ec Mon Sep 17 00:00:00 2001 From: Ashutosh Naik Date: Thu, 30 Apr 2009 15:08:58 -0700 Subject: ibft: fix the display of a few fields in the NIC attribute structure in sysfs Fix the display of a few fields in the iBFT NIC attribute structure in sysfs. Ensure that, if the DHCP IP address and the subnet mask for the interface is present in the iBFT NIC structure, the corresponding entries are created in sysfs tree for the device. This would hence create the additional entries in the tree based on the iBFT table and would not delete any existing entries. Signed-off-by: Ashutosh Naik Cc: Vishnu V Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index 7b7ddc2..420a96e 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -754,11 +754,11 @@ static int __init ibft_check_nic_for(struct ibft_nic *nic, int entry) rc = 1; break; case ibft_eth_ip_addr: - if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp))) + if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr))) rc = 1; break; case ibft_eth_subnet_mask: - if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp))) + if (nic->subnet_mask_prefix) rc = 1; break; case ibft_eth_origin: -- cgit v0.10.2 From f75e6745aa3084124ae1434fd7629853bdaf6798 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 21 Apr 2009 17:18:20 -0400 Subject: SUNRPC: Fix the problem of EADDRNOTAVAIL syslog floods on reconnect See http://bugzilla.kernel.org/show_bug.cgi?id=13034 If the port gets into a TIME_WAIT state, then we cannot reconnect without binding to a new port. Tested-by: Petr Vandrovec Tested-by: Jean Delvare Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 1758d9f..08afe43 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -261,6 +261,7 @@ void xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie); #define XPRT_BINDING (5) #define XPRT_CLOSING (6) #define XPRT_CONNECTION_ABORT (7) +#define XPRT_CONNECTION_CLOSE (8) static inline void xprt_set_connected(struct rpc_xprt *xprt) { diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index a0bfe53..06ca058 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -672,10 +672,8 @@ xprt_init_autodisconnect(unsigned long data) if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) goto out_abort; spin_unlock(&xprt->transport_lock); - if (xprt_connecting(xprt)) - xprt_release_write(xprt, NULL); - else - queue_work(rpciod_workqueue, &xprt->task_cleanup); + set_bit(XPRT_CONNECTION_CLOSE, &xprt->state); + queue_work(rpciod_workqueue, &xprt->task_cleanup); return; out_abort: spin_unlock(&xprt->transport_lock); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index d40ff50..e185961 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -807,6 +807,9 @@ static void xs_reset_transport(struct sock_xprt *transport) * * This is used when all requests are complete; ie, no DRC state remains * on the server we want to save. + * + * The caller _must_ be holding XPRT_LOCKED in order to avoid issues with + * xs_reset_transport() zeroing the socket from underneath a writer. */ static void xs_close(struct rpc_xprt *xprt) { @@ -824,6 +827,14 @@ static void xs_close(struct rpc_xprt *xprt) xprt_disconnect_done(xprt); } +static void xs_tcp_close(struct rpc_xprt *xprt) +{ + if (test_and_clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state)) + xs_close(xprt); + else + xs_tcp_shutdown(xprt); +} + /** * xs_destroy - prepare to shutdown a transport * @xprt: doomed transport @@ -1772,6 +1783,15 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt, xprt, -status, xprt_connected(xprt), sock->sk->sk_state); switch (status) { + default: + printk("%s: connect returned unhandled error %d\n", + __func__, status); + case -EADDRNOTAVAIL: + /* We're probably in TIME_WAIT. Get rid of existing socket, + * and retry + */ + set_bit(XPRT_CONNECTION_CLOSE, &xprt->state); + xprt_force_disconnect(xprt); case -ECONNREFUSED: case -ECONNRESET: case -ENETUNREACH: @@ -1782,10 +1802,6 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt, xprt_clear_connecting(xprt); return; } - /* get rid of existing socket, and retry */ - xs_tcp_shutdown(xprt); - printk("%s: connect returned unhandled error %d\n", - __func__, status); out_eagain: status = -EAGAIN; out: @@ -1994,7 +2010,7 @@ static struct rpc_xprt_ops xs_tcp_ops = { .buf_free = rpc_free, .send_request = xs_tcp_send_request, .set_retrans_timeout = xprt_set_retrans_timeout_def, - .close = xs_tcp_shutdown, + .close = xs_tcp_close, .destroy = xs_destroy, .print_stats = xs_tcp_print_stats, }; -- cgit v0.10.2 From 9fffb55f66127b52c937ede5196ebfa0c0d50bce Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 30 Apr 2009 15:25:53 +1000 Subject: Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc The powerpc kernel always requires an Open Firmware like device tree to supply device information. On systems without OF, this comes from a flattened device tree blob. This blob is usually generated by dtc, a tool which compiles a text description of the device tree into the flattened format used by the kernel. Sometimes, the bootwrapper makes small changes to the pre-compiled device tree blob (e.g. filling in the size of RAM). To do this it uses the libfdt library. Because these are only used on powerpc, the code for both these tools is included under arch/powerpc/boot (these were imported and are periodically updated from the upstream dtc tree). However, the microblaze architecture, currently being prepared for merging to mainline also uses dtc to produce device tree blobs. A few other archs have also mentioned some interest in using dtc. Therefore, this patch moves dtc and libfdt from arch/powerpc into scripts, where it can be used by any architecture. The vast bulk of this patch is a literal move, the rest is adjusting the various Makefiles to use dtc and libfdt correctly from their new locations. Signed-off-by: David Gibson Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4c78045..a0d1146 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION default y if PMAC_APM_EMU bool +config DTC + bool + default y + config DEFAULT_UIMAGE bool help diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4458abb..8da2bf9 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-protector),y) BOOTCFLAGS += -fno-stack-protector endif -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) DTS_FLAGS ?= -p 1024 @@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil.h $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdtheader := fdt.h libfdt.h libfdt_internal.h + +$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \ + $(addprefix $(obj)/,$(libfdtheader)) + src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ - $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ + $(libfdt) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ @@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_zliblinuxheader) +quiet_cmd_copy_libfdt = COPY $@ + cmd_copy_libfdt = cp $< $@ + +$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,copy_libfdt) + $(obj)/empty.c: @touch $@ @@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ + $(libfdt) $(libfdtheader) \ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ @@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS $@ quiet_cmd_bootar = BOOTAR $@ cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ +$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE + $(call if_changed_dep,bootcc) $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootcc) @@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE $(obj)/wrapper.a: $(obj-wlib) FORCE $(call if_changed,bootar) -hostprogs-y := addnote addRamDisk hack-coff mktree dtc +hostprogs-y := addnote addRamDisk hack-coff mktree targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ @@ -133,47 +147,10 @@ extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ dtstree := $(srctree)/$(src)/dts wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \ +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ $(wrapper) FORCE ############# -# Bits for building dtc -# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output - -dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o -dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o -dtc-objs := $(addprefix dtc-src/, $(dtc-objs)) - -# prerequisites on generated files needs to be explicit -$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h -$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h - -HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/ - -targets += dtc-src/dtc-parser.tab.c -targets += dtc-src/dtc-lexer.lex.c - -clean-files += dtc-src/dtc-parser.tab.h - -ifdef DTC_GENPARSER -BISON = bison -FLEX = flex - -quiet_cmd_bison = BISON $@ - cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped -quiet_cmd_flex = FLEX $@ - cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped - -$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE - $(call if_changed,bison) - -$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c - -$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE - $(call if_changed,flex) -endif - -############# # Bits for building various flavours of zImage ifneq ($(CROSS32_COMPILE),) @@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) # Rule to build device tree blobs -$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc - $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts +DTC = $(objtree)/scripts/dtc/dtc + +$(obj)/%.dtb: $(dtstree)/%.dts + $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/arch/powerpc/boot/dtc-src/Makefile.dtc deleted file mode 100644 index 6ddf9ec..0000000 --- a/arch/powerpc/boot/dtc-src/Makefile.dtc +++ /dev/null @@ -1,9 +0,0 @@ -# Makefile.dtc -# -# This is not a complete Makefile of itself. Instead, it is designed to -# be easily embeddable into other systems of Makefiles. -# -DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \ - checks.c -DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c -DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o) diff --git a/arch/powerpc/boot/dtc-src/checks.c b/arch/powerpc/boot/dtc-src/checks.c deleted file mode 100644 index 9548579..0000000 --- a/arch/powerpc/boot/dtc-src/checks.c +++ /dev/null @@ -1,587 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2007. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -#ifdef TRACE_CHECKS -#define TRACE(c, ...) \ - do { \ - fprintf(stderr, "=== %s: ", (c)->name); \ - fprintf(stderr, __VA_ARGS__); \ - fprintf(stderr, "\n"); \ - } while (0) -#else -#define TRACE(c, fmt, ...) do { } while (0) -#endif - -enum checklevel { - IGNORE = 0, - WARN = 1, - ERROR = 2, -}; - -enum checkstatus { - UNCHECKED = 0, - PREREQ, - PASSED, - FAILED, -}; - -struct check; - -typedef void (*tree_check_fn)(struct check *c, struct node *dt); -typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node); -typedef void (*prop_check_fn)(struct check *c, struct node *dt, - struct node *node, struct property *prop); - -struct check { - const char *name; - tree_check_fn tree_fn; - node_check_fn node_fn; - prop_check_fn prop_fn; - void *data; - enum checklevel level; - enum checkstatus status; - int inprogress; - int num_prereqs; - struct check **prereq; -}; - -#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \ - static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \ - static struct check nm = { \ - .name = #nm, \ - .tree_fn = (tfn), \ - .node_fn = (nfn), \ - .prop_fn = (pfn), \ - .data = (d), \ - .level = (lvl), \ - .status = UNCHECKED, \ - .num_prereqs = ARRAY_SIZE(nm##_prereqs), \ - .prereq = nm##_prereqs, \ - }; - -#define TREE_CHECK(nm, d, lvl, ...) \ - CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__) -#define NODE_CHECK(nm, d, lvl, ...) \ - CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__) -#define PROP_CHECK(nm, d, lvl, ...) \ - CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__) -#define BATCH_CHECK(nm, lvl, ...) \ - CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__) - -#ifdef __GNUC__ -static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3))); -#endif -static inline void check_msg(struct check *c, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - - if ((c->level < WARN) || (c->level <= quiet)) - return; /* Suppress message */ - - fprintf(stderr, "%s (%s): ", - (c->level == ERROR) ? "ERROR" : "Warning", c->name); - vfprintf(stderr, fmt, ap); - fprintf(stderr, "\n"); -} - -#define FAIL(c, ...) \ - do { \ - TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \ - (c)->status = FAILED; \ - check_msg((c), __VA_ARGS__); \ - } while (0) - -static void check_nodes_props(struct check *c, struct node *dt, struct node *node) -{ - struct node *child; - struct property *prop; - - TRACE(c, "%s", node->fullpath); - if (c->node_fn) - c->node_fn(c, dt, node); - - if (c->prop_fn) - for_each_property(node, prop) { - TRACE(c, "%s\t'%s'", node->fullpath, prop->name); - c->prop_fn(c, dt, node, prop); - } - - for_each_child(node, child) - check_nodes_props(c, dt, child); -} - -static int run_check(struct check *c, struct node *dt) -{ - int error = 0; - int i; - - assert(!c->inprogress); - - if (c->status != UNCHECKED) - goto out; - - c->inprogress = 1; - - for (i = 0; i < c->num_prereqs; i++) { - struct check *prq = c->prereq[i]; - error |= run_check(prq, dt); - if (prq->status != PASSED) { - c->status = PREREQ; - check_msg(c, "Failed prerequisite '%s'", - c->prereq[i]->name); - } - } - - if (c->status != UNCHECKED) - goto out; - - if (c->node_fn || c->prop_fn) - check_nodes_props(c, dt, dt); - - if (c->tree_fn) - c->tree_fn(c, dt); - if (c->status == UNCHECKED) - c->status = PASSED; - - TRACE(c, "\tCompleted, status %d", c->status); - -out: - c->inprogress = 0; - if ((c->status != PASSED) && (c->level == ERROR)) - error = 1; - return error; -} - -/* - * Utility check functions - */ - -static void check_is_string(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - char *propname = c->data; - - prop = get_property(node, propname); - if (!prop) - return; /* Not present, assumed ok */ - - if (!data_is_one_string(prop->val)) - FAIL(c, "\"%s\" property in %s is not a string", - propname, node->fullpath); -} -#define CHECK_IS_STRING(nm, propname, lvl) \ - CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl)) - -static void check_is_cell(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - char *propname = c->data; - - prop = get_property(node, propname); - if (!prop) - return; /* Not present, assumed ok */ - - if (prop->val.len != sizeof(cell_t)) - FAIL(c, "\"%s\" property in %s is not a single cell", - propname, node->fullpath); -} -#define CHECK_IS_CELL(nm, propname, lvl) \ - CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl)) - -/* - * Structural check functions - */ - -static void check_duplicate_node_names(struct check *c, struct node *dt, - struct node *node) -{ - struct node *child, *child2; - - for_each_child(node, child) - for (child2 = child->next_sibling; - child2; - child2 = child2->next_sibling) - if (streq(child->name, child2->name)) - FAIL(c, "Duplicate node name %s", - child->fullpath); -} -NODE_CHECK(duplicate_node_names, NULL, ERROR); - -static void check_duplicate_property_names(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop, *prop2; - - for_each_property(node, prop) - for (prop2 = prop->next; prop2; prop2 = prop2->next) - if (streq(prop->name, prop2->name)) - FAIL(c, "Duplicate property name %s in %s", - prop->name, node->fullpath); -} -NODE_CHECK(duplicate_property_names, NULL, ERROR); - -#define LOWERCASE "abcdefghijklmnopqrstuvwxyz" -#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ" -#define DIGITS "0123456789" -#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-" - -static void check_node_name_chars(struct check *c, struct node *dt, - struct node *node) -{ - int n = strspn(node->name, c->data); - - if (n < strlen(node->name)) - FAIL(c, "Bad character '%c' in node %s", - node->name[n], node->fullpath); -} -NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR); - -static void check_node_name_format(struct check *c, struct node *dt, - struct node *node) -{ - if (strchr(get_unitname(node), '@')) - FAIL(c, "Node %s has multiple '@' characters in name", - node->fullpath); -} -NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars); - -static void check_property_name_chars(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - int n = strspn(prop->name, c->data); - - if (n < strlen(prop->name)) - FAIL(c, "Bad character '%c' in property name \"%s\", node %s", - prop->name[n], prop->name, node->fullpath); -} -PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR); - -static void check_explicit_phandles(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - struct node *other; - cell_t phandle; - - prop = get_property(node, "linux,phandle"); - if (! prop) - return; /* No phandle, that's fine */ - - if (prop->val.len != sizeof(cell_t)) { - FAIL(c, "%s has bad length (%d) linux,phandle property", - node->fullpath, prop->val.len); - return; - } - - phandle = propval_cell(prop); - if ((phandle == 0) || (phandle == -1)) { - FAIL(c, "%s has invalid linux,phandle value 0x%x", - node->fullpath, phandle); - return; - } - - other = get_node_by_phandle(root, phandle); - if (other) { - FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)", - node->fullpath, phandle, other->fullpath); - return; - } - - node->phandle = phandle; -} -NODE_CHECK(explicit_phandles, NULL, ERROR); - -static void check_name_properties(struct check *c, struct node *root, - struct node *node) -{ - struct property **pp, *prop = NULL; - - for (pp = &node->proplist; *pp; pp = &((*pp)->next)) - if (streq((*pp)->name, "name")) { - prop = *pp; - break; - } - - if (!prop) - return; /* No name property, that's fine */ - - if ((prop->val.len != node->basenamelen+1) - || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) { - FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead" - " of base node name)", node->fullpath, prop->val.val); - } else { - /* The name property is correct, and therefore redundant. - * Delete it */ - *pp = prop->next; - free(prop->name); - data_free(prop->val); - free(prop); - } -} -CHECK_IS_STRING(name_is_string, "name", ERROR); -NODE_CHECK(name_properties, NULL, ERROR, &name_is_string); - -/* - * Reference fixup functions - */ - -static void fixup_phandle_references(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - struct marker *m = prop->val.markers; - struct node *refnode; - cell_t phandle; - - for_each_marker_of_type(m, REF_PHANDLE) { - assert(m->offset + sizeof(cell_t) <= prop->val.len); - - refnode = get_node_by_ref(dt, m->ref); - if (! refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); - continue; - } - - phandle = get_node_phandle(dt, refnode); - *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); - } -} -CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR, - &duplicate_node_names, &explicit_phandles); - -static void fixup_path_references(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - struct marker *m = prop->val.markers; - struct node *refnode; - char *path; - - for_each_marker_of_type(m, REF_PATH) { - assert(m->offset <= prop->val.len); - - refnode = get_node_by_ref(dt, m->ref); - if (!refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); - continue; - } - - path = refnode->fullpath; - prop->val = data_insert_at_marker(prop->val, m, path, - strlen(path) + 1); - } -} -CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR, - &duplicate_node_names); - -/* - * Semantic checks - */ -CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN); -CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN); -CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN); - -CHECK_IS_STRING(device_type_is_string, "device_type", WARN); -CHECK_IS_STRING(model_is_string, "model", WARN); -CHECK_IS_STRING(status_is_string, "status", WARN); - -static void fixup_addr_size_cells(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - - node->addr_cells = -1; - node->size_cells = -1; - - prop = get_property(node, "#address-cells"); - if (prop) - node->addr_cells = propval_cell(prop); - - prop = get_property(node, "#size-cells"); - if (prop) - node->size_cells = propval_cell(prop); -} -CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN, - &address_cells_is_cell, &size_cells_is_cell); - -#define node_addr_cells(n) \ - (((n)->addr_cells == -1) ? 2 : (n)->addr_cells) -#define node_size_cells(n) \ - (((n)->size_cells == -1) ? 1 : (n)->size_cells) - -static void check_reg_format(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - int addr_cells, size_cells, entrylen; - - prop = get_property(node, "reg"); - if (!prop) - return; /* No "reg", that's fine */ - - if (!node->parent) { - FAIL(c, "Root node has a \"reg\" property"); - return; - } - - if (prop->val.len == 0) - FAIL(c, "\"reg\" property in %s is empty", node->fullpath); - - addr_cells = node_addr_cells(node->parent); - size_cells = node_size_cells(node->parent); - entrylen = (addr_cells + size_cells) * sizeof(cell_t); - - if ((prop->val.len % entrylen) != 0) - FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " - "(#address-cells == %d, #size-cells == %d)", - node->fullpath, prop->val.len, addr_cells, size_cells); -} -NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells); - -static void check_ranges_format(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen; - - prop = get_property(node, "ranges"); - if (!prop) - return; - - if (!node->parent) { - FAIL(c, "Root node has a \"ranges\" property"); - return; - } - - p_addr_cells = node_addr_cells(node->parent); - p_size_cells = node_size_cells(node->parent); - c_addr_cells = node_addr_cells(node); - c_size_cells = node_size_cells(node); - entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t); - - if (prop->val.len == 0) { - if (p_addr_cells != c_addr_cells) - FAIL(c, "%s has empty \"ranges\" property but its " - "#address-cells (%d) differs from %s (%d)", - node->fullpath, c_addr_cells, node->parent->fullpath, - p_addr_cells); - if (p_size_cells != c_size_cells) - FAIL(c, "%s has empty \"ranges\" property but its " - "#size-cells (%d) differs from %s (%d)", - node->fullpath, c_size_cells, node->parent->fullpath, - p_size_cells); - } else if ((prop->val.len % entrylen) != 0) { - FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) " - "(parent #address-cells == %d, child #address-cells == %d, " - "#size-cells == %d)", node->fullpath, prop->val.len, - p_addr_cells, c_addr_cells, c_size_cells); - } -} -NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells); - -/* - * Style checks - */ -static void check_avoid_default_addr_size(struct check *c, struct node *dt, - struct node *node) -{ - struct property *reg, *ranges; - - if (!node->parent) - return; /* Ignore root node */ - - reg = get_property(node, "reg"); - ranges = get_property(node, "ranges"); - - if (!reg && !ranges) - return; - - if ((node->parent->addr_cells == -1)) - FAIL(c, "Relying on default #address-cells value for %s", - node->fullpath); - - if ((node->parent->size_cells == -1)) - FAIL(c, "Relying on default #size-cells value for %s", - node->fullpath); -} -NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells); - -static void check_obsolete_chosen_interrupt_controller(struct check *c, - struct node *dt) -{ - struct node *chosen; - struct property *prop; - - chosen = get_node_by_path(dt, "/chosen"); - if (!chosen) - return; - - prop = get_property(chosen, "interrupt-controller"); - if (prop) - FAIL(c, "/chosen has obsolete \"interrupt-controller\" " - "property"); -} -TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN); - -static struct check *check_table[] = { - &duplicate_node_names, &duplicate_property_names, - &node_name_chars, &node_name_format, &property_name_chars, - &name_is_string, &name_properties, - &explicit_phandles, - &phandle_references, &path_references, - - &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell, - &device_type_is_string, &model_is_string, &status_is_string, - - &addr_size_cells, ®_format, &ranges_format, - - &avoid_default_addr_size, - &obsolete_chosen_interrupt_controller, -}; - -void process_checks(int force, struct boot_info *bi) -{ - struct node *dt = bi->dt; - int i; - int error = 0; - - for (i = 0; i < ARRAY_SIZE(check_table); i++) { - struct check *c = check_table[i]; - - if (c->level != IGNORE) - error = error || run_check(c, dt); - } - - if (error) { - if (!force) { - fprintf(stderr, "ERROR: Input tree has errors, aborting " - "(use -f to force output)\n"); - exit(2); - } else if (quiet < 3) { - fprintf(stderr, "Warning: Input tree has errors, " - "output forced\n"); - } - } -} diff --git a/arch/powerpc/boot/dtc-src/data.c b/arch/powerpc/boot/dtc-src/data.c deleted file mode 100644 index dd2e3d3..0000000 --- a/arch/powerpc/boot/dtc-src/data.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -void data_free(struct data d) -{ - struct marker *m, *nm; - - m = d.markers; - while (m) { - nm = m->next; - free(m->ref); - free(m); - m = nm; - } - - if (d.val) - free(d.val); -} - -struct data data_grow_for(struct data d, int xlen) -{ - struct data nd; - int newsize; - - if (xlen == 0) - return d; - - nd = d; - - newsize = xlen; - - while ((d.len + xlen) > newsize) - newsize *= 2; - - nd.val = xrealloc(d.val, newsize); - - return nd; -} - -struct data data_copy_mem(const char *mem, int len) -{ - struct data d; - - d = data_grow_for(empty_data, len); - - d.len = len; - memcpy(d.val, mem, len); - - return d; -} - -static char get_oct_char(const char *s, int *i) -{ - char x[4]; - char *endx; - long val; - - x[3] = '\0'; - strncpy(x, s + *i, 3); - - val = strtol(x, &endx, 8); - - assert(endx > x); - - (*i) += endx - x; - return val; -} - -static char get_hex_char(const char *s, int *i) -{ - char x[3]; - char *endx; - long val; - - x[2] = '\0'; - strncpy(x, s + *i, 2); - - val = strtol(x, &endx, 16); - if (!(endx > x)) - die("\\x used with no following hex digits\n"); - - (*i) += endx - x; - return val; -} - -struct data data_copy_escape_string(const char *s, int len) -{ - int i = 0; - struct data d; - char *q; - - d = data_grow_for(empty_data, strlen(s)+1); - - q = d.val; - while (i < len) { - char c = s[i++]; - - if (c != '\\') { - q[d.len++] = c; - continue; - } - - c = s[i++]; - assert(c); - switch (c) { - case 'a': - q[d.len++] = '\a'; - break; - case 'b': - q[d.len++] = '\b'; - break; - case 't': - q[d.len++] = '\t'; - break; - case 'n': - q[d.len++] = '\n'; - break; - case 'v': - q[d.len++] = '\v'; - break; - case 'f': - q[d.len++] = '\f'; - break; - case 'r': - q[d.len++] = '\r'; - break; - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - i--; /* need to re-read the first digit as - * part of the octal value */ - q[d.len++] = get_oct_char(s, &i); - break; - case 'x': - q[d.len++] = get_hex_char(s, &i); - break; - default: - q[d.len++] = c; - } - } - - q[d.len++] = '\0'; - return d; -} - -struct data data_copy_file(FILE *f, size_t maxlen) -{ - struct data d = empty_data; - - while (!feof(f) && (d.len < maxlen)) { - size_t chunksize, ret; - - if (maxlen == -1) - chunksize = 4096; - else - chunksize = maxlen - d.len; - - d = data_grow_for(d, chunksize); - ret = fread(d.val + d.len, 1, chunksize, f); - - if (ferror(f)) - die("Error reading file into data: %s", strerror(errno)); - - if (d.len + ret < d.len) - die("Overflow reading file into data\n"); - - d.len += ret; - } - - return d; -} - -struct data data_append_data(struct data d, const void *p, int len) -{ - d = data_grow_for(d, len); - memcpy(d.val + d.len, p, len); - d.len += len; - return d; -} - -struct data data_insert_at_marker(struct data d, struct marker *m, - const void *p, int len) -{ - d = data_grow_for(d, len); - memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset); - memcpy(d.val + m->offset, p, len); - d.len += len; - - /* Adjust all markers after the one we're inserting at */ - m = m->next; - for_each_marker(m) - m->offset += len; - return d; -} - -struct data data_append_markers(struct data d, struct marker *m) -{ - struct marker **mp = &d.markers; - - /* Find the end of the markerlist */ - while (*mp) - mp = &((*mp)->next); - *mp = m; - return d; -} - -struct data data_merge(struct data d1, struct data d2) -{ - struct data d; - struct marker *m2 = d2.markers; - - d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2); - - /* Adjust for the length of d1 */ - for_each_marker(m2) - m2->offset += d1.len; - - d2.markers = NULL; /* So data_free() doesn't clobber them */ - data_free(d2); - - return d; -} - -struct data data_append_cell(struct data d, cell_t word) -{ - cell_t beword = cpu_to_fdt32(word); - - return data_append_data(d, &beword, sizeof(beword)); -} - -struct data data_append_re(struct data d, const struct fdt_reserve_entry *re) -{ - struct fdt_reserve_entry bere; - - bere.address = cpu_to_fdt64(re->address); - bere.size = cpu_to_fdt64(re->size); - - return data_append_data(d, &bere, sizeof(bere)); -} - -struct data data_append_addr(struct data d, uint64_t addr) -{ - uint64_t beaddr = cpu_to_fdt64(addr); - - return data_append_data(d, &beaddr, sizeof(beaddr)); -} - -struct data data_append_byte(struct data d, uint8_t byte) -{ - return data_append_data(d, &byte, 1); -} - -struct data data_append_zeroes(struct data d, int len) -{ - d = data_grow_for(d, len); - - memset(d.val + d.len, 0, len); - d.len += len; - return d; -} - -struct data data_append_align(struct data d, int align) -{ - int newlen = ALIGN(d.len, align); - return data_append_zeroes(d, newlen - d.len); -} - -struct data data_add_marker(struct data d, enum markertype type, char *ref) -{ - struct marker *m; - - m = xmalloc(sizeof(*m)); - m->offset = d.len; - m->type = type; - m->ref = ref; - m->next = NULL; - - return data_append_markers(d, m); -} - -int data_is_one_string(struct data d) -{ - int i; - int len = d.len; - - if (len == 0) - return 0; - - for (i = 0; i < len-1; i++) - if (d.val[i] == '\0') - return 0; - - if (d.val[len-1] != '\0') - return 0; - - return 1; -} diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/arch/powerpc/boot/dtc-src/dtc-lexer.l deleted file mode 100644 index 44dbfd3..0000000 --- a/arch/powerpc/boot/dtc-src/dtc-lexer.l +++ /dev/null @@ -1,320 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -%option noyywrap nounput yylineno - -%x INCLUDE -%x BYTESTRING -%x PROPNODENAME -%s V1 - -PROPNODECHAR [a-zA-Z0-9,._+*#?@-] -PATHCHAR ({PROPNODECHAR}|[/]) -LABEL [a-zA-Z_][a-zA-Z0-9_]* -STRING \"([^\\"]|\\.)*\" -WS [[:space:]] -COMMENT "/*"([^*]|\*+[^*/])*\*+"/" -LINECOMMENT "//".*\n - -%{ -#include "dtc.h" -#include "srcpos.h" -#include "dtc-parser.tab.h" - - -/*#define LEXDEBUG 1*/ - -#ifdef LEXDEBUG -#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) -#else -#define DPRINT(fmt, ...) do { } while (0) -#endif - -static int dts_version; /* = 0 */ - -#define BEGIN_DEFAULT() if (dts_version == 0) { \ - DPRINT("\n"); \ - BEGIN(INITIAL); \ - } else { \ - DPRINT("\n"); \ - BEGIN(V1); \ - } - -static void push_input_file(const char *filename); -static int pop_input_file(void); -%} - -%% -<*>"/include/"{WS}*{STRING} { - char *name = strchr(yytext, '\"') + 1; - yytext[yyleng-1] = '\0'; - push_input_file(name); - } - -<*><> { - if (!pop_input_file()) { - yyterminate(); - } - } - -<*>{STRING} { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("String: %s\n", yytext); - yylval.data = data_copy_escape_string(yytext+1, - yyleng-2); - yylloc.first_line = yylineno; - return DT_STRING; - } - -<*>"/dts-v1/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /dts-v1/\n"); - dts_version = 1; - BEGIN_DEFAULT(); - return DT_V1; - } - -<*>"/memreserve/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); - return DT_MEMRESERVE; - } - -<*>{LABEL}: { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Label: %s\n", yytext); - yylval.labelref = strdup(yytext); - yylval.labelref[yyleng-1] = '\0'; - return DT_LABEL; - } - -[bodh]# { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - if (*yytext == 'b') - yylval.cbase = 2; - else if (*yytext == 'o') - yylval.cbase = 8; - else if (*yytext == 'd') - yylval.cbase = 10; - else - yylval.cbase = 16; - DPRINT("Base: %d\n", yylval.cbase); - return DT_BASE; - } - -[0-9a-fA-F]+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LEGACYLITERAL; - } - -[0-9]+|0[xX][0-9a-fA-F]+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LITERAL; - } - -\&{LABEL} { /* label reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - -"&{/"{PATHCHAR}+\} { /* new-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yytext[yyleng-1] = '\0'; - DPRINT("Ref: %s\n", yytext+2); - yylval.labelref = strdup(yytext+2); - return DT_REF; - } - -"&/"{PATHCHAR}+ { /* old-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - -[0-9a-fA-F]{2} { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.byte = strtol(yytext, NULL, 16); - DPRINT("Byte: %02x\n", (int)yylval.byte); - return DT_BYTE; - } - -"]" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("/BYTESTRING\n"); - BEGIN_DEFAULT(); - return ']'; - } - -{PROPNODECHAR}+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("PropNodeName: %s\n", yytext); - yylval.propnodename = strdup(yytext); - BEGIN_DEFAULT(); - return DT_PROPNODENAME; - } - -"/incbin/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Binary Include\n"); - return DT_INCBIN; - } - -<*>{WS}+ /* eat whitespace */ -<*>{COMMENT}+ /* eat C-style comments */ -<*>{LINECOMMENT}+ /* eat C++-style comments */ - -<*>. { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Char: %c (\\x%02x)\n", yytext[0], - (unsigned)yytext[0]); - if (yytext[0] == '[') { - DPRINT("\n"); - BEGIN(BYTESTRING); - } - if ((yytext[0] == '{') - || (yytext[0] == ';')) { - DPRINT("\n"); - BEGIN(PROPNODENAME); - } - return yytext[0]; - } - -%% - - -/* - * Stack of nested include file contexts. - */ - -struct incl_file { - struct dtc_file *file; - YY_BUFFER_STATE yy_prev_buf; - int yy_prev_lineno; - struct incl_file *prev; -}; - -static struct incl_file *incl_file_stack; - - -/* - * Detect infinite include recursion. - */ -#define MAX_INCLUDE_DEPTH (100) - -static int incl_depth = 0; - - -static void push_input_file(const char *filename) -{ - struct incl_file *incl_file; - struct dtc_file *newfile; - struct search_path search, *searchptr = NULL; - - assert(filename); - - if (incl_depth++ >= MAX_INCLUDE_DEPTH) - die("Includes nested too deeply"); - - if (srcpos_file) { - search.dir = srcpos_file->dir; - search.next = NULL; - search.prev = NULL; - searchptr = &search; - } - - newfile = dtc_open_file(filename, searchptr); - - incl_file = xmalloc(sizeof(struct incl_file)); - - /* - * Save current context. - */ - incl_file->yy_prev_buf = YY_CURRENT_BUFFER; - incl_file->yy_prev_lineno = yylineno; - incl_file->file = srcpos_file; - incl_file->prev = incl_file_stack; - - incl_file_stack = incl_file; - - /* - * Establish new context. - */ - srcpos_file = newfile; - yylineno = 1; - yyin = newfile->file; - yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); -} - - -static int pop_input_file(void) -{ - struct incl_file *incl_file; - - if (incl_file_stack == 0) - return 0; - - dtc_close_file(srcpos_file); - - /* - * Pop. - */ - --incl_depth; - incl_file = incl_file_stack; - incl_file_stack = incl_file->prev; - - /* - * Recover old context. - */ - yy_delete_buffer(YY_CURRENT_BUFFER); - yy_switch_to_buffer(incl_file->yy_prev_buf); - yylineno = incl_file->yy_prev_lineno; - srcpos_file = incl_file->file; - yyin = incl_file->file ? incl_file->file->file : NULL; - - /* - * Free old state. - */ - free(incl_file); - - return 1; -} diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped deleted file mode 100644 index ac392cb..0000000 --- a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped +++ /dev/null @@ -1,2187 +0,0 @@ -#line 2 "dtc-lexer.lex.c" - -#line 4 "dtc-lexer.lex.c" - -#define YY_INT_ALIGNED short int - -/* A lexical scanner generated by flex */ - -#define FLEX_SCANNER -#define YY_FLEX_MAJOR_VERSION 2 -#define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 34 -#if YY_FLEX_SUBMINOR_VERSION > 0 -#define FLEX_BETA -#endif - -/* First, we deal with platform-specific or compiler-specific issues. */ - -/* begin standard C headers. */ -#include -#include -#include -#include - -/* end standard C headers. */ - -/* flex integer type definitions */ - -#ifndef FLEXINT_H -#define FLEXINT_H - -/* C99 systems have . Non-C99 systems may or may not. */ - -#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L - -/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, - * if you want the limit (max/min) macros for int types. - */ -#ifndef __STDC_LIMIT_MACROS -#define __STDC_LIMIT_MACROS 1 -#endif - -#include -typedef int8_t flex_int8_t; -typedef uint8_t flex_uint8_t; -typedef int16_t flex_int16_t; -typedef uint16_t flex_uint16_t; -typedef int32_t flex_int32_t; -typedef uint32_t flex_uint32_t; -#else -typedef signed char flex_int8_t; -typedef short int flex_int16_t; -typedef int flex_int32_t; -typedef unsigned char flex_uint8_t; -typedef unsigned short int flex_uint16_t; -typedef unsigned int flex_uint32_t; -#endif /* ! C99 */ - -/* Limits of integral types. */ -#ifndef INT8_MIN -#define INT8_MIN (-128) -#endif -#ifndef INT16_MIN -#define INT16_MIN (-32767-1) -#endif -#ifndef INT32_MIN -#define INT32_MIN (-2147483647-1) -#endif -#ifndef INT8_MAX -#define INT8_MAX (127) -#endif -#ifndef INT16_MAX -#define INT16_MAX (32767) -#endif -#ifndef INT32_MAX -#define INT32_MAX (2147483647) -#endif -#ifndef UINT8_MAX -#define UINT8_MAX (255U) -#endif -#ifndef UINT16_MAX -#define UINT16_MAX (65535U) -#endif -#ifndef UINT32_MAX -#define UINT32_MAX (4294967295U) -#endif - -#endif /* ! FLEXINT_H */ - -#ifdef __cplusplus - -/* The "const" storage-class-modifier is valid. */ -#define YY_USE_CONST - -#else /* ! __cplusplus */ - -/* C99 requires __STDC__ to be defined as 1. */ -#if defined (__STDC__) - -#define YY_USE_CONST - -#endif /* defined (__STDC__) */ -#endif /* ! __cplusplus */ - -#ifdef YY_USE_CONST -#define yyconst const -#else -#define yyconst -#endif - -/* Returned upon end-of-file. */ -#define YY_NULL 0 - -/* Promotes a possibly negative, possibly signed char to an unsigned - * integer for use as an array index. If the signed char is negative, - * we want to instead treat it as an 8-bit unsigned char, hence the - * double cast. - */ -#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) - -/* Enter a start condition. This macro really ought to take a parameter, - * but we do it the disgusting crufty way forced on us by the ()-less - * definition of BEGIN. - */ -#define BEGIN (yy_start) = 1 + 2 * - -/* Translate the current start state into a value that can be later handed - * to BEGIN to return to the state. The YYSTATE alias is for lex - * compatibility. - */ -#define YY_START (((yy_start) - 1) / 2) -#define YYSTATE YY_START - -/* Action number for EOF rule of a given start state. */ -#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) - -/* Special action meaning "start processing a new file". */ -#define YY_NEW_FILE yyrestart(yyin ) - -#define YY_END_OF_BUFFER_CHAR 0 - -/* Size of default input buffer. */ -#ifndef YY_BUF_SIZE -#define YY_BUF_SIZE 16384 -#endif - -/* The state buf must be large enough to hold one state per character in the main buffer. - */ -#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) - -#ifndef YY_TYPEDEF_YY_BUFFER_STATE -#define YY_TYPEDEF_YY_BUFFER_STATE -typedef struct yy_buffer_state *YY_BUFFER_STATE; -#endif - -extern int yyleng; - -extern FILE *yyin, *yyout; - -#define EOB_ACT_CONTINUE_SCAN 0 -#define EOB_ACT_END_OF_FILE 1 -#define EOB_ACT_LAST_MATCH 2 - - /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires - * access to the local variable yy_act. Since yyless() is a macro, it would break - * existing scanners that call yyless() from OUTSIDE yylex. - * One obvious solution it to make yy_act a global. I tried that, and saw - * a 5% performance hit in a non-yylineno scanner, because yy_act is - * normally declared as a register variable-- so it is not worth it. - */ - #define YY_LESS_LINENO(n) \ - do { \ - int yyl;\ - for ( yyl = n; yyl < yyleng; ++yyl )\ - if ( yytext[yyl] == '\n' )\ - --yylineno;\ - }while(0) - -/* Return all but the first "n" matched characters back to the input stream. */ -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - *yy_cp = (yy_hold_char); \ - YY_RESTORE_YY_MORE_OFFSET \ - (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ - YY_DO_BEFORE_ACTION; /* set up yytext again */ \ - } \ - while ( 0 ) - -#define unput(c) yyunput( c, (yytext_ptr) ) - -/* The following is because we cannot portably get our hands on size_t - * (without autoconf's help, which isn't available because we want - * flex-generated scanners to compile on their own). - * Given that the standard has decreed that size_t exists since 1989, - * I guess we can afford to depend on it. Manoj. - */ - -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - -#ifndef YY_STRUCT_YY_BUFFER_STATE -#define YY_STRUCT_YY_BUFFER_STATE -struct yy_buffer_state - { - FILE *yy_input_file; - - char *yy_ch_buf; /* input buffer */ - char *yy_buf_pos; /* current position in input buffer */ - - /* Size of input buffer in bytes, not including room for EOB - * characters. - */ - yy_size_t yy_buf_size; - - /* Number of characters read into yy_ch_buf, not including EOB - * characters. - */ - int yy_n_chars; - - /* Whether we "own" the buffer - i.e., we know we created it, - * and can realloc() it to grow it, and should free() it to - * delete it. - */ - int yy_is_our_buffer; - - /* Whether this is an "interactive" input source; if so, and - * if we're using stdio for input, then we want to use getc() - * instead of fread(), to make sure we stop fetching input after - * each newline. - */ - int yy_is_interactive; - - /* Whether we're considered to be at the beginning of a line. - * If so, '^' rules will be active on the next match, otherwise - * not. - */ - int yy_at_bol; - - int yy_bs_lineno; /**< The line count. */ - int yy_bs_column; /**< The column count. */ - - /* Whether to try to fill the input buffer when we reach the - * end of it. - */ - int yy_fill_buffer; - - int yy_buffer_status; - -#define YY_BUFFER_NEW 0 -#define YY_BUFFER_NORMAL 1 - /* When an EOF's been seen but there's still some text to process - * then we mark the buffer as YY_EOF_PENDING, to indicate that we - * shouldn't try reading from the input source any more. We might - * still have a bunch of tokens to match, though, because of - * possible backing-up. - * - * When we actually see the EOF, we change the status to "new" - * (via yyrestart()), so that the user can continue scanning by - * just pointing yyin at a new input file. - */ -#define YY_BUFFER_EOF_PENDING 2 - - }; -#endif /* !YY_STRUCT_YY_BUFFER_STATE */ - -/* Stack of input buffers. */ -static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ -static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ -static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ - -/* We provide macros for accessing buffer states in case in the - * future we want to put the buffer states in a more general - * "scanner state". - * - * Returns the top of the stack, or NULL. - */ -#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ - ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ - : NULL) - -/* Same as previous macro, but useful when we know that the buffer stack is not - * NULL or when we need an lvalue. For internal use only. - */ -#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] - -/* yy_hold_char holds the character lost when yytext is formed. */ -static char yy_hold_char; -static int yy_n_chars; /* number of characters read into yy_ch_buf */ -int yyleng; - -/* Points to current character in buffer. */ -static char *yy_c_buf_p = (char *) 0; -static int yy_init = 0; /* whether we need to initialize */ -static int yy_start = 0; /* start state number */ - -/* Flag which is used to allow yywrap()'s to do buffer switches - * instead of setting up a fresh yyin. A bit of a hack ... - */ -static int yy_did_buffer_switch_on_eof; - -void yyrestart (FILE *input_file ); -void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); -YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); -void yy_delete_buffer (YY_BUFFER_STATE b ); -void yy_flush_buffer (YY_BUFFER_STATE b ); -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); -void yypop_buffer_state (void ); - -static void yyensure_buffer_stack (void ); -static void yy_load_buffer_state (void ); -static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); - -#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) - -YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); -YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); -YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); - -void *yyalloc (yy_size_t ); -void *yyrealloc (void *,yy_size_t ); -void yyfree (void * ); - -#define yy_new_buffer yy_create_buffer - -#define yy_set_interactive(is_interactive) \ - { \ - if ( ! YY_CURRENT_BUFFER ){ \ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ - } - -#define yy_set_bol(at_bol) \ - { \ - if ( ! YY_CURRENT_BUFFER ){\ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ - } - -#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) - -/* Begin user sect3 */ - -#define yywrap(n) 1 -#define YY_SKIP_YYWRAP - -typedef unsigned char YY_CHAR; - -FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; - -typedef int yy_state_type; - -extern int yylineno; - -int yylineno = 1; - -extern char *yytext; -#define yytext_ptr yytext - -static yy_state_type yy_get_previous_state (void ); -static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); -static int yy_get_next_buffer (void ); -static void yy_fatal_error (yyconst char msg[] ); - -/* Done after the current pattern has been matched and before the - * corresponding action - sets up yytext. - */ -#define YY_DO_BEFORE_ACTION \ - (yytext_ptr) = yy_bp; \ - yyleng = (size_t) (yy_cp - yy_bp); \ - (yy_hold_char) = *yy_cp; \ - *yy_cp = '\0'; \ - (yy_c_buf_p) = yy_cp; - -#define YY_NUM_RULES 20 -#define YY_END_OF_BUFFER 21 -/* This struct is not used in this scanner, - but its presence is necessary. */ -struct yy_trans_info - { - flex_int32_t yy_verify; - flex_int32_t yy_nxt; - }; -static yyconst flex_int16_t yy_accept[104] = - { 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 21, 19, 16, 16, 19, 19, 19, 7, 7, 19, - 7, 19, 19, 19, 19, 13, 14, 14, 19, 8, - 8, 16, 0, 2, 0, 0, 9, 0, 0, 0, - 0, 0, 0, 7, 7, 5, 0, 6, 0, 12, - 12, 14, 14, 8, 0, 11, 9, 0, 0, 0, - 0, 18, 0, 0, 0, 0, 8, 0, 17, 0, - 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 3, 15, - 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, - - 0, 4, 0 - } ; - -static yyconst flex_int32_t yy_ec[256] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, - 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 2, 1, 4, 5, 1, 1, 6, 1, 1, - 1, 7, 8, 8, 9, 8, 10, 11, 12, 13, - 13, 13, 13, 13, 13, 13, 13, 14, 1, 1, - 1, 1, 8, 8, 15, 15, 15, 15, 15, 15, - 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, - 16, 16, 16, 16, 16, 16, 16, 17, 16, 16, - 1, 18, 19, 1, 16, 1, 15, 20, 21, 22, - - 23, 15, 16, 24, 25, 16, 16, 26, 27, 28, - 24, 16, 16, 29, 30, 31, 32, 33, 16, 17, - 16, 16, 34, 1, 35, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1 - } ; - -static yyconst flex_int32_t yy_meta[36] = - { 0, - 1, 1, 1, 1, 2, 1, 2, 2, 2, 3, - 4, 4, 4, 5, 6, 7, 7, 1, 1, 6, - 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 8, 1 - } ; - -static yyconst flex_int16_t yy_base[117] = - { 0, - 0, 0, 30, 0, 44, 0, 67, 0, 97, 105, - 302, 303, 35, 44, 40, 94, 112, 0, 129, 152, - 296, 295, 159, 0, 176, 303, 0, 116, 95, 165, - 49, 46, 102, 303, 296, 0, 0, 288, 290, 293, - 264, 266, 270, 0, 0, 303, 0, 303, 264, 303, - 0, 0, 195, 101, 0, 0, 0, 0, 284, 125, - 277, 265, 225, 230, 216, 218, 0, 202, 224, 221, - 217, 107, 196, 188, 303, 206, 179, 186, 178, 185, - 183, 162, 161, 150, 169, 160, 145, 125, 303, 303, - 137, 109, 190, 103, 203, 167, 108, 197, 303, 123, - - 29, 303, 303, 215, 221, 226, 229, 234, 240, 246, - 250, 257, 265, 270, 275, 282 - } ; - -static yyconst flex_int16_t yy_def[117] = - { 0, - 103, 1, 1, 3, 3, 5, 103, 7, 3, 3, - 103, 103, 103, 103, 104, 105, 103, 106, 103, 19, - 19, 20, 103, 107, 20, 103, 108, 109, 105, 103, - 103, 103, 104, 103, 104, 110, 111, 103, 112, 113, - 103, 103, 103, 106, 19, 103, 20, 103, 103, 103, - 20, 108, 109, 103, 114, 110, 111, 115, 112, 112, - 113, 103, 103, 103, 103, 103, 114, 115, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 116, 103, 116, 103, 116, - - 103, 103, 0, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103 - } ; - -static yyconst flex_int16_t yy_nxt[339] = - { 0, - 12, 13, 14, 15, 12, 16, 12, 12, 12, 17, - 18, 18, 18, 12, 19, 20, 20, 12, 12, 21, - 19, 21, 19, 22, 20, 20, 20, 20, 20, 20, - 20, 20, 20, 12, 12, 12, 32, 32, 102, 23, - 12, 12, 12, 34, 20, 32, 32, 32, 32, 20, - 20, 20, 20, 20, 24, 24, 24, 35, 25, 54, - 54, 54, 26, 25, 25, 25, 25, 12, 13, 14, - 15, 27, 12, 27, 27, 27, 23, 27, 27, 27, - 12, 28, 28, 28, 12, 12, 28, 28, 28, 28, - 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, - - 12, 12, 29, 36, 103, 34, 17, 30, 31, 31, - 29, 54, 54, 54, 17, 30, 31, 31, 39, 35, - 52, 40, 52, 52, 52, 103, 78, 38, 38, 46, - 101, 60, 79, 41, 69, 97, 42, 94, 43, 45, - 45, 45, 46, 45, 47, 47, 93, 92, 45, 45, - 45, 45, 47, 47, 47, 47, 47, 47, 47, 47, - 47, 47, 47, 47, 47, 39, 47, 91, 40, 90, - 99, 47, 47, 47, 47, 54, 54, 54, 89, 88, - 41, 55, 87, 49, 100, 43, 51, 51, 51, 86, - 51, 95, 95, 96, 85, 51, 51, 51, 51, 52, - - 99, 52, 52, 52, 95, 95, 96, 84, 46, 83, - 82, 81, 39, 79, 100, 33, 33, 33, 33, 33, - 33, 33, 33, 37, 80, 77, 37, 37, 37, 44, - 40, 44, 50, 76, 50, 52, 75, 52, 74, 52, - 52, 53, 73, 53, 53, 53, 53, 56, 56, 56, - 72, 56, 56, 57, 71, 57, 57, 59, 59, 59, - 59, 59, 59, 59, 59, 61, 61, 61, 61, 61, - 61, 61, 61, 67, 70, 67, 68, 68, 68, 62, - 68, 68, 98, 98, 98, 98, 98, 98, 98, 98, - 60, 66, 65, 64, 63, 62, 60, 58, 103, 48, - - 48, 103, 11, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103 - } ; - -static yyconst flex_int16_t yy_chk[339] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 3, 13, 13, 101, 3, - 3, 3, 3, 15, 3, 14, 14, 32, 32, 3, - 3, 3, 3, 3, 5, 5, 5, 15, 5, 31, - 31, 31, 5, 5, 5, 5, 5, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - - 7, 7, 9, 16, 29, 33, 9, 9, 9, 9, - 10, 54, 54, 54, 10, 10, 10, 10, 17, 33, - 28, 17, 28, 28, 28, 100, 72, 16, 29, 28, - 97, 60, 72, 17, 60, 94, 17, 92, 17, 19, - 19, 19, 19, 19, 19, 19, 91, 88, 19, 19, - 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, - 19, 19, 20, 20, 20, 23, 20, 87, 23, 86, - 96, 20, 20, 20, 20, 30, 30, 30, 85, 84, - 23, 30, 83, 23, 96, 23, 25, 25, 25, 82, - 25, 93, 93, 93, 81, 25, 25, 25, 25, 53, - - 98, 53, 53, 53, 95, 95, 95, 80, 53, 79, - 78, 77, 76, 74, 98, 104, 104, 104, 104, 104, - 104, 104, 104, 105, 73, 71, 105, 105, 105, 106, - 70, 106, 107, 69, 107, 108, 68, 108, 66, 108, - 108, 109, 65, 109, 109, 109, 109, 110, 110, 110, - 64, 110, 110, 111, 63, 111, 111, 112, 112, 112, - 112, 112, 112, 112, 112, 113, 113, 113, 113, 113, - 113, 113, 113, 114, 62, 114, 115, 115, 115, 61, - 115, 115, 116, 116, 116, 116, 116, 116, 116, 116, - 59, 49, 43, 42, 41, 40, 39, 38, 35, 22, - - 21, 11, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103 - } ; - -/* Table of booleans, true if rule could match eol. */ -static yyconst flex_int32_t yy_rule_can_match_eol[21] = - { 0, -1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, - 0, }; - -static yy_state_type yy_last_accepting_state; -static char *yy_last_accepting_cpos; - -extern int yy_flex_debug; -int yy_flex_debug = 0; - -/* The intent behind this definition is that it'll catch - * any uses of REJECT which flex missed. - */ -#define REJECT reject_used_but_not_detected -#define yymore() yymore_used_but_not_detected -#define YY_MORE_ADJ 0 -#define YY_RESTORE_YY_MORE_OFFSET -char *yytext; -#line 1 "dtc-lexer.l" -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - - - - -#line 37 "dtc-lexer.l" -#include "dtc.h" -#include "srcpos.h" -#include "dtc-parser.tab.h" - - -/*#define LEXDEBUG 1*/ - -#ifdef LEXDEBUG -#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) -#else -#define DPRINT(fmt, ...) do { } while (0) -#endif - -static int dts_version; /* = 0 */ - -#define BEGIN_DEFAULT() if (dts_version == 0) { \ - DPRINT("\n"); \ - BEGIN(INITIAL); \ - } else { \ - DPRINT("\n"); \ - BEGIN(V1); \ - } - -static void push_input_file(const char *filename); -static int pop_input_file(void); -#line 638 "dtc-lexer.lex.c" - -#define INITIAL 0 -#define INCLUDE 1 -#define BYTESTRING 2 -#define PROPNODENAME 3 -#define V1 4 - -#ifndef YY_NO_UNISTD_H -/* Special case for "unistd.h", since it is non-ANSI. We include it way - * down here because we want the user's section 1 to have been scanned first. - * The user has a chance to override it with an option. - */ -#include -#endif - -#ifndef YY_EXTRA_TYPE -#define YY_EXTRA_TYPE void * -#endif - -static int yy_init_globals (void ); - -/* Macros after this point can all be overridden by user definitions in - * section 1. - */ - -#ifndef YY_SKIP_YYWRAP -#ifdef __cplusplus -extern "C" int yywrap (void ); -#else -extern int yywrap (void ); -#endif -#endif - -#ifndef yytext_ptr -static void yy_flex_strncpy (char *,yyconst char *,int ); -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * ); -#endif - -#ifndef YY_NO_INPUT - -#ifdef __cplusplus -static int yyinput (void ); -#else -static int input (void ); -#endif - -#endif - -/* Amount of stuff to slurp up with each read. */ -#ifndef YY_READ_BUF_SIZE -#define YY_READ_BUF_SIZE 8192 -#endif - -/* Copy whatever the last rule matched to the standard output. */ -#ifndef ECHO -/* This used to be an fputs(), but since the string might contain NUL's, - * we now use fwrite(). - */ -#define ECHO fwrite( yytext, yyleng, 1, yyout ) -#endif - -/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, - * is returned in "result". - */ -#ifndef YY_INPUT -#define YY_INPUT(buf,result,max_size) \ - if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ - { \ - int c = '*'; \ - int n; \ - for ( n = 0; n < max_size && \ - (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ - buf[n] = (char) c; \ - if ( c == '\n' ) \ - buf[n++] = (char) c; \ - if ( c == EOF && ferror( yyin ) ) \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - result = n; \ - } \ - else \ - { \ - errno=0; \ - while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ - { \ - if( errno != EINTR) \ - { \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - break; \ - } \ - errno=0; \ - clearerr(yyin); \ - } \ - }\ -\ - -#endif - -/* No semi-colon after return; correct usage is to write "yyterminate();" - - * we don't want an extra ';' after the "return" because that will cause - * some compilers to complain about unreachable statements. - */ -#ifndef yyterminate -#define yyterminate() return YY_NULL -#endif - -/* Number of entries by which start-condition stack grows. */ -#ifndef YY_START_STACK_INCR -#define YY_START_STACK_INCR 25 -#endif - -/* Report a fatal error. */ -#ifndef YY_FATAL_ERROR -#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) -#endif - -/* end tables serialization structures and prototypes */ - -/* Default declaration of generated scanner - a define so the user can - * easily add parameters. - */ -#ifndef YY_DECL -#define YY_DECL_IS_OURS 1 - -extern int yylex (void); - -#define YY_DECL int yylex (void) -#endif /* !YY_DECL */ - -/* Code executed at the beginning of each rule, after yytext and yyleng - * have been set up. - */ -#ifndef YY_USER_ACTION -#define YY_USER_ACTION -#endif - -/* Code executed at the end of each rule. */ -#ifndef YY_BREAK -#define YY_BREAK break; -#endif - -#define YY_RULE_SETUP \ - YY_USER_ACTION - -/** The main scanner function which does all the work. - */ -YY_DECL -{ - register yy_state_type yy_current_state; - register char *yy_cp, *yy_bp; - register int yy_act; - -#line 64 "dtc-lexer.l" - -#line 795 "dtc-lexer.lex.c" - - if ( !(yy_init) ) - { - (yy_init) = 1; - -#ifdef YY_USER_INIT - YY_USER_INIT; -#endif - - if ( ! (yy_start) ) - (yy_start) = 1; /* first start state */ - - if ( ! yyin ) - yyin = stdin; - - if ( ! yyout ) - yyout = stdout; - - if ( ! YY_CURRENT_BUFFER ) { - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_load_buffer_state( ); - } - - while ( 1 ) /* loops until end-of-file is reached */ - { - yy_cp = (yy_c_buf_p); - - /* Support of yytext. */ - *yy_cp = (yy_hold_char); - - /* yy_bp points to the position in yy_ch_buf of the start of - * the current run. - */ - yy_bp = yy_cp; - - yy_current_state = (yy_start); -yy_match: - do - { - register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - ++yy_cp; - } - while ( yy_base[yy_current_state] != 303 ); - -yy_find_action: - yy_act = yy_accept[yy_current_state]; - if ( yy_act == 0 ) - { /* have to back up */ - yy_cp = (yy_last_accepting_cpos); - yy_current_state = (yy_last_accepting_state); - yy_act = yy_accept[yy_current_state]; - } - - YY_DO_BEFORE_ACTION; - - if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] ) - { - int yyl; - for ( yyl = 0; yyl < yyleng; ++yyl ) - if ( yytext[yyl] == '\n' ) - - yylineno++; -; - } - -do_action: /* This label is used only to access EOF actions. */ - - switch ( yy_act ) - { /* beginning of action switch */ - case 0: /* must back up */ - /* undo the effects of YY_DO_BEFORE_ACTION */ - *yy_cp = (yy_hold_char); - yy_cp = (yy_last_accepting_cpos); - yy_current_state = (yy_last_accepting_state); - goto yy_find_action; - -case 1: -/* rule 1 can match eol */ -YY_RULE_SETUP -#line 65 "dtc-lexer.l" -{ - char *name = strchr(yytext, '\"') + 1; - yytext[yyleng-1] = '\0'; - push_input_file(name); - } - YY_BREAK -case YY_STATE_EOF(INITIAL): -case YY_STATE_EOF(INCLUDE): -case YY_STATE_EOF(BYTESTRING): -case YY_STATE_EOF(PROPNODENAME): -case YY_STATE_EOF(V1): -#line 71 "dtc-lexer.l" -{ - if (!pop_input_file()) { - yyterminate(); - } - } - YY_BREAK -case 2: -/* rule 2 can match eol */ -YY_RULE_SETUP -#line 77 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("String: %s\n", yytext); - yylval.data = data_copy_escape_string(yytext+1, - yyleng-2); - yylloc.first_line = yylineno; - return DT_STRING; - } - YY_BREAK -case 3: -YY_RULE_SETUP -#line 87 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /dts-v1/\n"); - dts_version = 1; - BEGIN_DEFAULT(); - return DT_V1; - } - YY_BREAK -case 4: -YY_RULE_SETUP -#line 96 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); - return DT_MEMRESERVE; - } - YY_BREAK -case 5: -YY_RULE_SETUP -#line 104 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Label: %s\n", yytext); - yylval.labelref = strdup(yytext); - yylval.labelref[yyleng-1] = '\0'; - return DT_LABEL; - } - YY_BREAK -case 6: -YY_RULE_SETUP -#line 113 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - if (*yytext == 'b') - yylval.cbase = 2; - else if (*yytext == 'o') - yylval.cbase = 8; - else if (*yytext == 'd') - yylval.cbase = 10; - else - yylval.cbase = 16; - DPRINT("Base: %d\n", yylval.cbase); - return DT_BASE; - } - YY_BREAK -case 7: -YY_RULE_SETUP -#line 128 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LEGACYLITERAL; - } - YY_BREAK -case 8: -YY_RULE_SETUP -#line 136 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LITERAL; - } - YY_BREAK -case 9: -YY_RULE_SETUP -#line 144 "dtc-lexer.l" -{ /* label reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - YY_BREAK -case 10: -YY_RULE_SETUP -#line 152 "dtc-lexer.l" -{ /* new-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yytext[yyleng-1] = '\0'; - DPRINT("Ref: %s\n", yytext+2); - yylval.labelref = strdup(yytext+2); - return DT_REF; - } - YY_BREAK -case 11: -YY_RULE_SETUP -#line 161 "dtc-lexer.l" -{ /* old-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - YY_BREAK -case 12: -YY_RULE_SETUP -#line 169 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.byte = strtol(yytext, NULL, 16); - DPRINT("Byte: %02x\n", (int)yylval.byte); - return DT_BYTE; - } - YY_BREAK -case 13: -YY_RULE_SETUP -#line 177 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("/BYTESTRING\n"); - BEGIN_DEFAULT(); - return ']'; - } - YY_BREAK -case 14: -YY_RULE_SETUP -#line 185 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("PropNodeName: %s\n", yytext); - yylval.propnodename = strdup(yytext); - BEGIN_DEFAULT(); - return DT_PROPNODENAME; - } - YY_BREAK -case 15: -YY_RULE_SETUP -#line 194 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Binary Include\n"); - return DT_INCBIN; - } - YY_BREAK -case 16: -/* rule 16 can match eol */ -YY_RULE_SETUP -#line 201 "dtc-lexer.l" -/* eat whitespace */ - YY_BREAK -case 17: -/* rule 17 can match eol */ -YY_RULE_SETUP -#line 202 "dtc-lexer.l" -/* eat C-style comments */ - YY_BREAK -case 18: -/* rule 18 can match eol */ -YY_RULE_SETUP -#line 203 "dtc-lexer.l" -/* eat C++-style comments */ - YY_BREAK -case 19: -YY_RULE_SETUP -#line 205 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Char: %c (\\x%02x)\n", yytext[0], - (unsigned)yytext[0]); - if (yytext[0] == '[') { - DPRINT("\n"); - BEGIN(BYTESTRING); - } - if ((yytext[0] == '{') - || (yytext[0] == ';')) { - DPRINT("\n"); - BEGIN(PROPNODENAME); - } - return yytext[0]; - } - YY_BREAK -case 20: -YY_RULE_SETUP -#line 222 "dtc-lexer.l" -ECHO; - YY_BREAK -#line 1120 "dtc-lexer.lex.c" - - case YY_END_OF_BUFFER: - { - /* Amount of text matched not including the EOB char. */ - int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; - - /* Undo the effects of YY_DO_BEFORE_ACTION. */ - *yy_cp = (yy_hold_char); - YY_RESTORE_YY_MORE_OFFSET - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) - { - /* We're scanning a new file or input source. It's - * possible that this happened because the user - * just pointed yyin at a new source and called - * yylex(). If so, then we have to assure - * consistency between YY_CURRENT_BUFFER and our - * globals. Here is the right place to do so, because - * this is the first action (other than possibly a - * back-up) that will match for the new input source. - */ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; - } - - /* Note that here we test for yy_c_buf_p "<=" to the position - * of the first EOB in the buffer, since yy_c_buf_p will - * already have been incremented past the NUL character - * (since all states make transitions on EOB to the - * end-of-buffer state). Contrast this with the test - * in input(). - */ - if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - { /* This was really a NUL. */ - yy_state_type yy_next_state; - - (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - /* Okay, we're now positioned to make the NUL - * transition. We couldn't have - * yy_get_previous_state() go ahead and do it - * for us because it doesn't know how to deal - * with the possibility of jamming (and we don't - * want to build jamming into it because then it - * will run more slowly). - */ - - yy_next_state = yy_try_NUL_trans( yy_current_state ); - - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - - if ( yy_next_state ) - { - /* Consume the NUL. */ - yy_cp = ++(yy_c_buf_p); - yy_current_state = yy_next_state; - goto yy_match; - } - - else - { - yy_cp = (yy_c_buf_p); - goto yy_find_action; - } - } - - else switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_END_OF_FILE: - { - (yy_did_buffer_switch_on_eof) = 0; - - if ( yywrap( ) ) - { - /* Note: because we've taken care in - * yy_get_next_buffer() to have set up - * yytext, we can now set up - * yy_c_buf_p so that if some total - * hoser (like flex itself) wants to - * call the scanner after we return the - * YY_NULL, it'll still work - another - * YY_NULL will get returned. - */ - (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; - - yy_act = YY_STATE_EOF(YY_START); - goto do_action; - } - - else - { - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; - } - break; - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = - (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_match; - - case EOB_ACT_LAST_MATCH: - (yy_c_buf_p) = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_find_action; - } - break; - } - - default: - YY_FATAL_ERROR( - "fatal flex scanner internal error--no action found" ); - } /* end of action switch */ - } /* end of scanning one token */ -} /* end of yylex */ - -/* yy_get_next_buffer - try to read in a new buffer - * - * Returns a code representing an action: - * EOB_ACT_LAST_MATCH - - * EOB_ACT_CONTINUE_SCAN - continue scanning from current position - * EOB_ACT_END_OF_FILE - end of file - */ -static int yy_get_next_buffer (void) -{ - register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; - register char *source = (yytext_ptr); - register int number_to_move, i; - int ret_val; - - if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) - YY_FATAL_ERROR( - "fatal flex scanner internal error--end of buffer missed" ); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) - { /* Don't try to fill the buffer, so this is an EOF. */ - if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) - { - /* We matched a single character, the EOB, so - * treat this as a final EOF. - */ - return EOB_ACT_END_OF_FILE; - } - - else - { - /* We matched some text prior to the EOB, first - * process it. - */ - return EOB_ACT_LAST_MATCH; - } - } - - /* Try to read more data. */ - - /* First move last chars to start of buffer. */ - number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; - - for ( i = 0; i < number_to_move; ++i ) - *(dest++) = *(source++); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) - /* don't do the read, it's not guaranteed to return an EOF, - * just force an EOF - */ - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; - - else - { - int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) - { /* Not enough room in the buffer - grow it. */ - - /* just a shorter name for the current buffer */ - YY_BUFFER_STATE b = YY_CURRENT_BUFFER; - - int yy_c_buf_p_offset = - (int) ((yy_c_buf_p) - b->yy_ch_buf); - - if ( b->yy_is_our_buffer ) - { - int new_size = b->yy_buf_size * 2; - - if ( new_size <= 0 ) - b->yy_buf_size += b->yy_buf_size / 8; - else - b->yy_buf_size *= 2; - - b->yy_ch_buf = (char *) - /* Include room in for 2 EOB chars. */ - yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); - } - else - /* Can't grow it, we don't own it. */ - b->yy_ch_buf = 0; - - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( - "fatal error - scanner input buffer overflow" ); - - (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; - - num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - - number_to_move - 1; - - } - - if ( num_to_read > YY_READ_BUF_SIZE ) - num_to_read = YY_READ_BUF_SIZE; - - /* Read in more data. */ - YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), - (yy_n_chars), (size_t) num_to_read ); - - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - if ( (yy_n_chars) == 0 ) - { - if ( number_to_move == YY_MORE_ADJ ) - { - ret_val = EOB_ACT_END_OF_FILE; - yyrestart(yyin ); - } - - else - { - ret_val = EOB_ACT_LAST_MATCH; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = - YY_BUFFER_EOF_PENDING; - } - } - - else - ret_val = EOB_ACT_CONTINUE_SCAN; - - if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { - /* Extend the array by 50%, plus the number we really need. */ - yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); - if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); - } - - (yy_n_chars) += number_to_move; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; - - (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; - - return ret_val; -} - -/* yy_get_previous_state - get the state just before the EOB char was reached */ - - static yy_state_type yy_get_previous_state (void) -{ - register yy_state_type yy_current_state; - register char *yy_cp; - - yy_current_state = (yy_start); - - for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) - { - register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - } - - return yy_current_state; -} - -/* yy_try_NUL_trans - try to make a transition on the NUL character - * - * synopsis - * next_state = yy_try_NUL_trans( current_state ); - */ - static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) -{ - register int yy_is_jam; - register char *yy_cp = (yy_c_buf_p); - - register YY_CHAR yy_c = 1; - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - yy_is_jam = (yy_current_state == 103); - - return yy_is_jam ? 0 : yy_current_state; -} - -#ifndef YY_NO_INPUT -#ifdef __cplusplus - static int yyinput (void) -#else - static int input (void) -#endif - -{ - int c; - - *(yy_c_buf_p) = (yy_hold_char); - - if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) - { - /* yy_c_buf_p now points to the character we want to return. - * If this occurs *before* the EOB characters, then it's a - * valid NUL; if not, then we've hit the end of the buffer. - */ - if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - /* This was really a NUL. */ - *(yy_c_buf_p) = '\0'; - - else - { /* need more input */ - int offset = (yy_c_buf_p) - (yytext_ptr); - ++(yy_c_buf_p); - - switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_LAST_MATCH: - /* This happens because yy_g_n_b() - * sees that we've accumulated a - * token and flags that we need to - * try matching the token before - * proceeding. But for input(), - * there's no matching to consider. - * So convert the EOB_ACT_LAST_MATCH - * to EOB_ACT_END_OF_FILE. - */ - - /* Reset buffer status. */ - yyrestart(yyin ); - - /*FALLTHROUGH*/ - - case EOB_ACT_END_OF_FILE: - { - if ( yywrap( ) ) - return EOF; - - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; -#ifdef __cplusplus - return yyinput(); -#else - return input(); -#endif - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = (yytext_ptr) + offset; - break; - } - } - } - - c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ - *(yy_c_buf_p) = '\0'; /* preserve yytext */ - (yy_hold_char) = *++(yy_c_buf_p); - - if ( c == '\n' ) - - yylineno++; -; - - return c; -} -#endif /* ifndef YY_NO_INPUT */ - -/** Immediately switch to a different input stream. - * @param input_file A readable stream. - * - * @note This function does not reset the start condition to @c INITIAL . - */ - void yyrestart (FILE * input_file ) -{ - - if ( ! YY_CURRENT_BUFFER ){ - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_init_buffer(YY_CURRENT_BUFFER,input_file ); - yy_load_buffer_state( ); -} - -/** Switch to a different input buffer. - * @param new_buffer The new input buffer. - * - */ - void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) -{ - - /* TODO. We should be able to replace this entire function body - * with - * yypop_buffer_state(); - * yypush_buffer_state(new_buffer); - */ - yyensure_buffer_stack (); - if ( YY_CURRENT_BUFFER == new_buffer ) - return; - - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - YY_CURRENT_BUFFER_LVALUE = new_buffer; - yy_load_buffer_state( ); - - /* We don't actually know whether we did this switch during - * EOF (yywrap()) processing, but the only time this flag - * is looked at is after yywrap() is called, so it's safe - * to go ahead and always set it. - */ - (yy_did_buffer_switch_on_eof) = 1; -} - -static void yy_load_buffer_state (void) -{ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; - yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; - (yy_hold_char) = *(yy_c_buf_p); -} - -/** Allocate and initialize an input buffer state. - * @param file A readable stream. - * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * - * @return the allocated buffer state. - */ - YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) -{ - YY_BUFFER_STATE b; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_buf_size = size; - - /* yy_ch_buf has to be 2 characters longer than the size given because - * we need to put in 2 end-of-buffer characters. - */ - b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_is_our_buffer = 1; - - yy_init_buffer(b,file ); - - return b; -} - -/** Destroy the buffer. - * @param b a buffer created with yy_create_buffer() - * - */ - void yy_delete_buffer (YY_BUFFER_STATE b ) -{ - - if ( ! b ) - return; - - if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ - YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; - - if ( b->yy_is_our_buffer ) - yyfree((void *) b->yy_ch_buf ); - - yyfree((void *) b ); -} - -#ifndef __cplusplus -extern int isatty (int ); -#endif /* __cplusplus */ - -/* Initializes or reinitializes a buffer. - * This function is sometimes called more than once on the same buffer, - * such as during a yyrestart() or at EOF. - */ - static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) - -{ - int oerrno = errno; - - yy_flush_buffer(b ); - - b->yy_input_file = file; - b->yy_fill_buffer = 1; - - /* If b is the current buffer, then yy_init_buffer was _probably_ - * called from yyrestart() or through yy_get_next_buffer. - * In that case, we don't want to reset the lineno or column. - */ - if (b != YY_CURRENT_BUFFER){ - b->yy_bs_lineno = 1; - b->yy_bs_column = 0; - } - - b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; - - errno = oerrno; -} - -/** Discard all buffered characters. On the next scan, YY_INPUT will be called. - * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. - * - */ - void yy_flush_buffer (YY_BUFFER_STATE b ) -{ - if ( ! b ) - return; - - b->yy_n_chars = 0; - - /* We always need two end-of-buffer characters. The first causes - * a transition to the end-of-buffer state. The second causes - * a jam in that state. - */ - b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; - b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; - - b->yy_buf_pos = &b->yy_ch_buf[0]; - - b->yy_at_bol = 1; - b->yy_buffer_status = YY_BUFFER_NEW; - - if ( b == YY_CURRENT_BUFFER ) - yy_load_buffer_state( ); -} - -/** Pushes the new state onto the stack. The new state becomes - * the current state. This function will allocate the stack - * if necessary. - * @param new_buffer The new state. - * - */ -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) -{ - if (new_buffer == NULL) - return; - - yyensure_buffer_stack(); - - /* This block is copied from yy_switch_to_buffer. */ - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - /* Only push if top exists. Otherwise, replace top. */ - if (YY_CURRENT_BUFFER) - (yy_buffer_stack_top)++; - YY_CURRENT_BUFFER_LVALUE = new_buffer; - - /* copied from yy_switch_to_buffer. */ - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; -} - -/** Removes and deletes the top of the stack, if present. - * The next element becomes the new top. - * - */ -void yypop_buffer_state (void) -{ - if (!YY_CURRENT_BUFFER) - return; - - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - if ((yy_buffer_stack_top) > 0) - --(yy_buffer_stack_top); - - if (YY_CURRENT_BUFFER) { - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; - } -} - -/* Allocates the stack if it does not exist. - * Guarantees space for at least one push. - */ -static void yyensure_buffer_stack (void) -{ - int num_to_alloc; - - if (!(yy_buffer_stack)) { - - /* First allocation is just for 2 elements, since we don't know if this - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ - num_to_alloc = 1; - (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); - - (yy_buffer_stack_max) = num_to_alloc; - (yy_buffer_stack_top) = 0; - return; - } - - if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ - - /* Increase the buffer to prepare for a possible push. */ - int grow_size = 8 /* arbitrary grow size */; - - num_to_alloc = (yy_buffer_stack_max) + grow_size; - (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc - ((yy_buffer_stack), - num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - /* zero only the new slots.*/ - memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); - (yy_buffer_stack_max) = num_to_alloc; - } -} - -/** Setup the input buffer state to scan directly from a user-specified character buffer. - * @param base the character buffer - * @param size the size in bytes of the character buffer - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) -{ - YY_BUFFER_STATE b; - - if ( size < 2 || - base[size-2] != YY_END_OF_BUFFER_CHAR || - base[size-1] != YY_END_OF_BUFFER_CHAR ) - /* They forgot to leave room for the EOB's. */ - return 0; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); - - b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ - b->yy_buf_pos = b->yy_ch_buf = base; - b->yy_is_our_buffer = 0; - b->yy_input_file = 0; - b->yy_n_chars = b->yy_buf_size; - b->yy_is_interactive = 0; - b->yy_at_bol = 1; - b->yy_fill_buffer = 0; - b->yy_buffer_status = YY_BUFFER_NEW; - - yy_switch_to_buffer(b ); - - return b; -} - -/** Setup the input buffer state to scan a string. The next call to yylex() will - * scan from a @e copy of @a str. - * @param yystr a NUL-terminated string to scan - * - * @return the newly allocated buffer state object. - * @note If you want to scan bytes that may contain NUL values, then use - * yy_scan_bytes() instead. - */ -YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) -{ - - return yy_scan_bytes(yystr,strlen(yystr) ); -} - -/** Setup the input buffer state to scan the given bytes. The next call to yylex() will - * scan from a @e copy of @a bytes. - * @param bytes the byte buffer to scan - * @param len the number of bytes in the buffer pointed to by @a bytes. - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) -{ - YY_BUFFER_STATE b; - char *buf; - yy_size_t n; - int i; - - /* Get memory for full buffer, including space for trailing EOB's. */ - n = _yybytes_len + 2; - buf = (char *) yyalloc(n ); - if ( ! buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); - - for ( i = 0; i < _yybytes_len; ++i ) - buf[i] = yybytes[i]; - - buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; - - b = yy_scan_buffer(buf,n ); - if ( ! b ) - YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); - - /* It's okay to grow etc. this buffer, and we should throw it - * away when we're done. - */ - b->yy_is_our_buffer = 1; - - return b; -} - -#ifndef YY_EXIT_FAILURE -#define YY_EXIT_FAILURE 2 -#endif - -static void yy_fatal_error (yyconst char* msg ) -{ - (void) fprintf( stderr, "%s\n", msg ); - exit( YY_EXIT_FAILURE ); -} - -/* Redefine yyless() so it works in section 3 code. */ - -#undef yyless -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - yytext[yyleng] = (yy_hold_char); \ - (yy_c_buf_p) = yytext + yyless_macro_arg; \ - (yy_hold_char) = *(yy_c_buf_p); \ - *(yy_c_buf_p) = '\0'; \ - yyleng = yyless_macro_arg; \ - } \ - while ( 0 ) - -/* Accessor methods (get/set functions) to struct members. */ - -/** Get the current line number. - * - */ -int yyget_lineno (void) -{ - - return yylineno; -} - -/** Get the input stream. - * - */ -FILE *yyget_in (void) -{ - return yyin; -} - -/** Get the output stream. - * - */ -FILE *yyget_out (void) -{ - return yyout; -} - -/** Get the length of the current token. - * - */ -int yyget_leng (void) -{ - return yyleng; -} - -/** Get the current token. - * - */ - -char *yyget_text (void) -{ - return yytext; -} - -/** Set the current line number. - * @param line_number - * - */ -void yyset_lineno (int line_number ) -{ - - yylineno = line_number; -} - -/** Set the input stream. This does not discard the current - * input buffer. - * @param in_str A readable stream. - * - * @see yy_switch_to_buffer - */ -void yyset_in (FILE * in_str ) -{ - yyin = in_str ; -} - -void yyset_out (FILE * out_str ) -{ - yyout = out_str ; -} - -int yyget_debug (void) -{ - return yy_flex_debug; -} - -void yyset_debug (int bdebug ) -{ - yy_flex_debug = bdebug ; -} - -static int yy_init_globals (void) -{ - /* Initialization is the same as for the non-reentrant scanner. - * This function is called from yylex_destroy(), so don't allocate here. - */ - - /* We do not touch yylineno unless the option is enabled. */ - yylineno = 1; - - (yy_buffer_stack) = 0; - (yy_buffer_stack_top) = 0; - (yy_buffer_stack_max) = 0; - (yy_c_buf_p) = (char *) 0; - (yy_init) = 0; - (yy_start) = 0; - -/* Defined in main.c */ -#ifdef YY_STDINIT - yyin = stdin; - yyout = stdout; -#else - yyin = (FILE *) 0; - yyout = (FILE *) 0; -#endif - - /* For future reference: Set errno on error, since we are called by - * yylex_init() - */ - return 0; -} - -/* yylex_destroy is for both reentrant and non-reentrant scanners. */ -int yylex_destroy (void) -{ - - /* Pop the buffer stack, destroying each element. */ - while(YY_CURRENT_BUFFER){ - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - yypop_buffer_state(); - } - - /* Destroy the stack itself. */ - yyfree((yy_buffer_stack) ); - (yy_buffer_stack) = NULL; - - /* Reset the globals. This is important in a non-reentrant scanner so the next time - * yylex() is called, initialization will occur. */ - yy_init_globals( ); - - return 0; -} - -/* - * Internal utility routines. - */ - -#ifndef yytext_ptr -static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) -{ - register int i; - for ( i = 0; i < n; ++i ) - s1[i] = s2[i]; -} -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * s ) -{ - register int n; - for ( n = 0; s[n]; ++n ) - ; - - return n; -} -#endif - -void *yyalloc (yy_size_t size ) -{ - return (void *) malloc( size ); -} - -void *yyrealloc (void * ptr, yy_size_t size ) -{ - /* The cast to (char *) in the following accommodates both - * implementations that use char* generic pointers, and those - * that use void* generic pointers. It works with the latter - * because both ANSI C and C++ allow castless assignment from - * any pointer type to void*, and deal with argument conversions - * as though doing an assignment. - */ - return (void *) realloc( (char *) ptr, size ); -} - -void yyfree (void * ptr ) -{ - free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ -} - -#define YYTABLES_NAME "yytables" - -#line 222 "dtc-lexer.l" - - - - -/* - * Stack of nested include file contexts. - */ - -struct incl_file { - struct dtc_file *file; - YY_BUFFER_STATE yy_prev_buf; - int yy_prev_lineno; - struct incl_file *prev; -}; - -static struct incl_file *incl_file_stack; - - -/* - * Detect infinite include recursion. - */ -#define MAX_INCLUDE_DEPTH (100) - -static int incl_depth = 0; - - -static void push_input_file(const char *filename) -{ - struct incl_file *incl_file; - struct dtc_file *newfile; - struct search_path search, *searchptr = NULL; - - assert(filename); - - if (incl_depth++ >= MAX_INCLUDE_DEPTH) - die("Includes nested too deeply"); - - if (srcpos_file) { - search.dir = srcpos_file->dir; - search.next = NULL; - search.prev = NULL; - searchptr = &search; - } - - newfile = dtc_open_file(filename, searchptr); - - incl_file = xmalloc(sizeof(struct incl_file)); - - /* - * Save current context. - */ - incl_file->yy_prev_buf = YY_CURRENT_BUFFER; - incl_file->yy_prev_lineno = yylineno; - incl_file->file = srcpos_file; - incl_file->prev = incl_file_stack; - - incl_file_stack = incl_file; - - /* - * Establish new context. - */ - srcpos_file = newfile; - yylineno = 1; - yyin = newfile->file; - yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); -} - - -static int pop_input_file(void) -{ - struct incl_file *incl_file; - - if (incl_file_stack == 0) - return 0; - - dtc_close_file(srcpos_file); - - /* - * Pop. - */ - --incl_depth; - incl_file = incl_file_stack; - incl_file_stack = incl_file->prev; - - /* - * Recover old context. - */ - yy_delete_buffer(YY_CURRENT_BUFFER); - yy_switch_to_buffer(incl_file->yy_prev_buf); - yylineno = incl_file->yy_prev_lineno; - srcpos_file = incl_file->file; - yyin = incl_file->file ? incl_file->file->file : NULL; - - /* - * Free old state. - */ - free(incl_file); - - return 1; -} - diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped deleted file mode 100644 index 2712937..0000000 --- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped +++ /dev/null @@ -1,2040 +0,0 @@ -/* A Bison parser, made by GNU Bison 2.3. */ - -/* Skeleton implementation for Bison's Yacc-like parsers in C - - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -/* As a special exception, you may create a larger work that contains - part or all of the Bison parser skeleton and distribute that work - under terms of your choice, so long as that work isn't itself a - parser generator using the skeleton or a modified version thereof - as a parser skeleton. Alternatively, if you modify or redistribute - the parser skeleton itself, you may (at your option) remove this - special exception, which will cause the skeleton and the resulting - Bison output files to be licensed under the GNU General Public - License without this special exception. - - This special exception was added by the Free Software Foundation in - version 2.2 of Bison. */ - -/* C LALR(1) parser skeleton written by Richard Stallman, by - simplifying the original so-called "semantic" parser. */ - -/* All symbols defined below should begin with yy or YY, to avoid - infringing on user name space. This should be done even for local - variables, as they might otherwise be expanded by user macros. - There are some unavoidable exceptions within include files to - define necessary library symbols; they are noted "INFRINGES ON - USER NAME SPACE" below. */ - -/* Identify Bison output. */ -#define YYBISON 1 - -/* Bison version. */ -#define YYBISON_VERSION "2.3" - -/* Skeleton name. */ -#define YYSKELETON_NAME "yacc.c" - -/* Pure parsers. */ -#define YYPURE 0 - -/* Using locations. */ -#define YYLSP_NEEDED 1 - - - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_PROPNODENAME = 260, - DT_LITERAL = 261, - DT_LEGACYLITERAL = 262, - DT_BASE = 263, - DT_BYTE = 264, - DT_STRING = 265, - DT_LABEL = 266, - DT_REF = 267, - DT_INCBIN = 268 - }; -#endif -/* Tokens. */ -#define DT_V1 258 -#define DT_MEMRESERVE 259 -#define DT_PROPNODENAME 260 -#define DT_LITERAL 261 -#define DT_LEGACYLITERAL 262 -#define DT_BASE 263 -#define DT_BYTE 264 -#define DT_STRING 265 -#define DT_LABEL 266 -#define DT_REF 267 -#define DT_INCBIN 268 - - - - -/* Copy the first part of user declarations. */ -#line 23 "dtc-parser.y" - -#include - -#include "dtc.h" -#include "srcpos.h" - -extern int yylex(void); - -extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); - - -/* Enabling traces. */ -#ifndef YYDEBUG -# define YYDEBUG 0 -#endif - -/* Enabling verbose error messages. */ -#ifdef YYERROR_VERBOSE -# undef YYERROR_VERBOSE -# define YYERROR_VERBOSE 1 -#else -# define YYERROR_VERBOSE 0 -#endif - -/* Enabling the token table. */ -#ifndef YYTOKEN_TABLE -# define YYTOKEN_TABLE 0 -#endif - -#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE -#line 37 "dtc-parser.y" -{ - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} -/* Line 187 of yacc.c. */ -#line 153 "dtc-parser.tab.c" - YYSTYPE; -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ -# define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 -#endif - -#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED -typedef struct YYLTYPE -{ - int first_line; - int first_column; - int last_line; - int last_column; -} YYLTYPE; -# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ -# define YYLTYPE_IS_DECLARED 1 -# define YYLTYPE_IS_TRIVIAL 1 -#endif - - -/* Copy the second part of user declarations. */ - - -/* Line 216 of yacc.c. */ -#line 178 "dtc-parser.tab.c" - -#ifdef short -# undef short -#endif - -#ifdef YYTYPE_UINT8 -typedef YYTYPE_UINT8 yytype_uint8; -#else -typedef unsigned char yytype_uint8; -#endif - -#ifdef YYTYPE_INT8 -typedef YYTYPE_INT8 yytype_int8; -#elif (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -typedef signed char yytype_int8; -#else -typedef short int yytype_int8; -#endif - -#ifdef YYTYPE_UINT16 -typedef YYTYPE_UINT16 yytype_uint16; -#else -typedef unsigned short int yytype_uint16; -#endif - -#ifdef YYTYPE_INT16 -typedef YYTYPE_INT16 yytype_int16; -#else -typedef short int yytype_int16; -#endif - -#ifndef YYSIZE_T -# ifdef __SIZE_TYPE__ -# define YYSIZE_T __SIZE_TYPE__ -# elif defined size_t -# define YYSIZE_T size_t -# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include /* INFRINGES ON USER NAME SPACE */ -# define YYSIZE_T size_t -# else -# define YYSIZE_T unsigned int -# endif -#endif - -#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) - -#ifndef YY_ -# if YYENABLE_NLS -# if ENABLE_NLS -# include /* INFRINGES ON USER NAME SPACE */ -# define YY_(msgid) dgettext ("bison-runtime", msgid) -# endif -# endif -# ifndef YY_ -# define YY_(msgid) msgid -# endif -#endif - -/* Suppress unused-variable warnings by "using" E. */ -#if ! defined lint || defined __GNUC__ -# define YYUSE(e) ((void) (e)) -#else -# define YYUSE(e) /* empty */ -#endif - -/* Identity function, used to suppress warnings about constant conditions. */ -#ifndef lint -# define YYID(n) (n) -#else -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static int -YYID (int i) -#else -static int -YYID (i) - int i; -#endif -{ - return i; -} -#endif - -#if ! defined yyoverflow || YYERROR_VERBOSE - -/* The parser invokes alloca or malloc; define the necessary symbols. */ - -# ifdef YYSTACK_USE_ALLOCA -# if YYSTACK_USE_ALLOCA -# ifdef __GNUC__ -# define YYSTACK_ALLOC __builtin_alloca -# elif defined __BUILTIN_VA_ARG_INCR -# include /* INFRINGES ON USER NAME SPACE */ -# elif defined _AIX -# define YYSTACK_ALLOC __alloca -# elif defined _MSC_VER -# include /* INFRINGES ON USER NAME SPACE */ -# define alloca _alloca -# else -# define YYSTACK_ALLOC alloca -# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 -# endif -# endif -# endif -# endif -# endif - -# ifdef YYSTACK_ALLOC - /* Pacify GCC's `empty if-body' warning. */ -# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) -# ifndef YYSTACK_ALLOC_MAXIMUM - /* The OS might guarantee only one guard page at the bottom of the stack, - and a page size can be as small as 4096 bytes. So we cannot safely - invoke alloca (N) if N exceeds 4096. Use a slightly smaller number - to allow for a few compiler-allocated temporary stack slots. */ -# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ -# endif -# else -# define YYSTACK_ALLOC YYMALLOC -# define YYSTACK_FREE YYFREE -# ifndef YYSTACK_ALLOC_MAXIMUM -# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM -# endif -# if (defined __cplusplus && ! defined _STDLIB_H \ - && ! ((defined YYMALLOC || defined malloc) \ - && (defined YYFREE || defined free))) -# include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 -# endif -# endif -# ifndef YYMALLOC -# define YYMALLOC malloc -# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# ifndef YYFREE -# define YYFREE free -# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void free (void *); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# endif -#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ - - -#if (! defined yyoverflow \ - && (! defined __cplusplus \ - || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \ - && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) - -/* A type that is properly aligned for any stack member. */ -union yyalloc -{ - yytype_int16 yyss; - YYSTYPE yyvs; - YYLTYPE yyls; -}; - -/* The size of the maximum gap between one aligned stack and the next. */ -# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) - -/* The size of an array large to enough to hold all stacks, each with - N elements. */ -# define YYSTACK_BYTES(N) \ - ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ - + 2 * YYSTACK_GAP_MAXIMUM) - -/* Copy COUNT objects from FROM to TO. The source and destination do - not overlap. */ -# ifndef YYCOPY -# if defined __GNUC__ && 1 < __GNUC__ -# define YYCOPY(To, From, Count) \ - __builtin_memcpy (To, From, (Count) * sizeof (*(From))) -# else -# define YYCOPY(To, From, Count) \ - do \ - { \ - YYSIZE_T yyi; \ - for (yyi = 0; yyi < (Count); yyi++) \ - (To)[yyi] = (From)[yyi]; \ - } \ - while (YYID (0)) -# endif -# endif - -/* Relocate STACK from its old location to the new one. The - local variables YYSIZE and YYSTACKSIZE give the old and new number of - elements in the stack, and YYPTR gives the new location of the - stack. Advance YYPTR to a properly aligned location for the next - stack. */ -# define YYSTACK_RELOCATE(Stack) \ - do \ - { \ - YYSIZE_T yynewbytes; \ - YYCOPY (&yyptr->Stack, Stack, yysize); \ - Stack = &yyptr->Stack; \ - yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ - yyptr += yynewbytes / sizeof (*yyptr); \ - } \ - while (YYID (0)) - -#endif - -/* YYFINAL -- State number of the termination state. */ -#define YYFINAL 9 -/* YYLAST -- Last index in YYTABLE. */ -#define YYLAST 73 - -/* YYNTOKENS -- Number of terminals. */ -#define YYNTOKENS 27 -/* YYNNTS -- Number of nonterminals. */ -#define YYNNTS 20 -/* YYNRULES -- Number of rules. */ -#define YYNRULES 45 -/* YYNRULES -- Number of states. */ -#define YYNSTATES 76 - -/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ -#define YYUNDEFTOK 2 -#define YYMAXUTOK 268 - -#define YYTRANSLATE(YYX) \ - ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) - -/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ -static const yytype_uint8 yytranslate[] = -{ - 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 24, 26, 2, 2, 25, 15, 2, 16, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 14, - 20, 19, 21, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 22, 2, 23, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 17, 2, 18, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, - 5, 6, 7, 8, 9, 10, 11, 12, 13 -}; - -#if YYDEBUG -/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in - YYRHS. */ -static const yytype_uint8 yyprhs[] = -{ - 0, 0, 3, 8, 11, 12, 15, 21, 22, 25, - 27, 34, 36, 38, 41, 47, 48, 51, 57, 61, - 64, 69, 74, 77, 87, 93, 96, 97, 100, 103, - 104, 107, 110, 113, 114, 116, 118, 121, 122, 125, - 128, 129, 132, 135, 139, 140 -}; - -/* YYRHS -- A `-1'-separated list of the rules' RHS. */ -static const yytype_int8 yyrhs[] = -{ - 28, 0, -1, 3, 14, 29, 34, -1, 31, 34, - -1, -1, 30, 29, -1, 46, 4, 33, 33, 14, - -1, -1, 32, 31, -1, 30, -1, 46, 4, 33, - 15, 33, 14, -1, 6, -1, 7, -1, 16, 35, - -1, 17, 36, 44, 18, 14, -1, -1, 36, 37, - -1, 46, 5, 19, 38, 14, -1, 46, 5, 14, - -1, 39, 10, -1, 39, 20, 40, 21, -1, 39, - 22, 43, 23, -1, 39, 12, -1, 39, 13, 24, - 10, 25, 33, 25, 33, 26, -1, 39, 13, 24, - 10, 26, -1, 38, 11, -1, -1, 38, 25, -1, - 39, 11, -1, -1, 40, 42, -1, 40, 12, -1, - 40, 11, -1, -1, 8, -1, 6, -1, 41, 7, - -1, -1, 43, 9, -1, 43, 11, -1, -1, 45, - 44, -1, 45, 37, -1, 46, 5, 35, -1, -1, - 11, -1 -}; - -/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ -static const yytype_uint16 yyrline[] = -{ - 0, 89, 89, 93, 101, 104, 111, 119, 122, 129, - 133, 140, 144, 151, 158, 166, 169, 176, 180, 187, - 191, 195, 199, 203, 220, 231, 239, 242, 246, 254, - 257, 261, 266, 274, 277, 281, 285, 293, 296, 300, - 308, 311, 315, 323, 331, 334 -}; -#endif - -#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE -/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. - First, the terminals, then, starting at YYNTOKENS, nonterminals. */ -static const char *const yytname[] = -{ - "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", - "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE", - "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'", - "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','", - "')'", "$accept", "sourcefile", "memreserves", "memreserve", - "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef", - "proplist", "propdef", "propdata", "propdataprefix", "celllist", - "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0 -}; -#endif - -# ifdef YYPRINT -/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to - token YYLEX-NUM. */ -static const yytype_uint16 yytoknum[] = -{ - 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, - 265, 266, 267, 268, 59, 45, 47, 123, 125, 61, - 60, 62, 91, 93, 40, 44, 41 -}; -# endif - -/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ -static const yytype_uint8 yyr1[] = -{ - 0, 27, 28, 28, 29, 29, 30, 31, 31, 32, - 32, 33, 33, 34, 35, 36, 36, 37, 37, 38, - 38, 38, 38, 38, 38, 38, 39, 39, 39, 40, - 40, 40, 40, 41, 41, 42, 42, 43, 43, 43, - 44, 44, 44, 45, 46, 46 -}; - -/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ -static const yytype_uint8 yyr2[] = -{ - 0, 2, 4, 2, 0, 2, 5, 0, 2, 1, - 6, 1, 1, 2, 5, 0, 2, 5, 3, 2, - 4, 4, 2, 9, 5, 2, 0, 2, 2, 0, - 2, 2, 2, 0, 1, 1, 2, 0, 2, 2, - 0, 2, 2, 3, 0, 1 -}; - -/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state - STATE-NUM when YYTABLE doesn't specify something else to do. Zero - means the default is an error. */ -static const yytype_uint8 yydefact[] = -{ - 7, 0, 45, 0, 9, 0, 7, 0, 4, 1, - 0, 3, 8, 0, 0, 4, 0, 15, 13, 11, - 12, 0, 2, 5, 0, 40, 0, 0, 0, 16, - 0, 40, 0, 0, 6, 0, 42, 41, 0, 10, - 14, 18, 26, 43, 0, 0, 25, 17, 27, 19, - 28, 22, 0, 29, 37, 0, 33, 0, 0, 35, - 34, 32, 31, 20, 0, 30, 38, 39, 21, 0, - 24, 36, 0, 0, 0, 23 -}; - -/* YYDEFGOTO[NTERM-NUM]. */ -static const yytype_int8 yydefgoto[] = -{ - -1, 3, 14, 4, 5, 6, 27, 11, 18, 25, - 29, 44, 45, 56, 64, 65, 57, 30, 31, 7 -}; - -/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing - STATE-NUM. */ -#define YYPACT_NINF -14 -static const yytype_int8 yypact[] = -{ - 30, -11, -14, 7, -14, -1, 27, 13, 27, -14, - 8, -14, -14, 40, -1, 27, 35, -14, -14, -14, - -14, 21, -14, -14, 40, 24, 40, 28, 40, -14, - 32, 24, 46, 38, -14, 39, -14, -14, 26, -14, - -14, -14, -14, -14, -9, 10, -14, -14, -14, -14, - -14, -14, 31, -14, -14, 44, -2, 3, 23, -14, - -14, -14, -14, -14, 50, -14, -14, -14, -14, 40, - -14, -14, 33, 40, 36, -14 -}; - -/* YYPGOTO[NTERM-NUM]. */ -static const yytype_int8 yypgoto[] = -{ - -14, -14, 48, 29, 53, -14, -13, 47, 34, -14, - 37, -14, -14, -14, -14, -14, -14, 42, -14, -7 -}; - -/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If - positive, shift that token. If negative, reduce the rule which - number is the opposite. If zero, do what YYDEFACT says. - If YYTABLE_NINF, syntax error. */ -#define YYTABLE_NINF -45 -static const yytype_int8 yytable[] = -{ - 21, 16, 46, 8, 59, 47, 60, 9, 16, 61, - 62, 28, 66, 33, 67, 10, 48, 13, 32, 63, - 49, 50, 51, 52, 32, 17, 68, 19, 20, -44, - 53, -44, 54, 1, -44, 2, 26, 15, 2, 24, - 41, 2, 34, 17, 15, 42, 19, 20, 69, 70, - 35, 38, 39, 40, 58, 55, 72, 71, 73, 12, - 74, 22, 75, 23, 0, 0, 0, 0, 36, 0, - 0, 0, 43, 37 -}; - -static const yytype_int8 yycheck[] = -{ - 13, 8, 11, 14, 6, 14, 8, 0, 15, 11, - 12, 24, 9, 26, 11, 16, 25, 4, 25, 21, - 10, 11, 12, 13, 31, 17, 23, 6, 7, 5, - 20, 4, 22, 3, 4, 11, 15, 8, 11, 4, - 14, 11, 14, 17, 15, 19, 6, 7, 25, 26, - 18, 5, 14, 14, 10, 24, 69, 7, 25, 6, - 73, 14, 26, 15, -1, -1, -1, -1, 31, -1, - -1, -1, 38, 31 -}; - -/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing - symbol of state STATE-NUM. */ -static const yytype_uint8 yystos[] = -{ - 0, 3, 11, 28, 30, 31, 32, 46, 14, 0, - 16, 34, 31, 4, 29, 30, 46, 17, 35, 6, - 7, 33, 34, 29, 4, 36, 15, 33, 33, 37, - 44, 45, 46, 33, 14, 18, 37, 44, 5, 14, - 14, 14, 19, 35, 38, 39, 11, 14, 25, 10, - 11, 12, 13, 20, 22, 24, 40, 43, 10, 6, - 8, 11, 12, 21, 41, 42, 9, 11, 23, 25, - 26, 7, 33, 25, 33, 26 -}; - -#define yyerrok (yyerrstatus = 0) -#define yyclearin (yychar = YYEMPTY) -#define YYEMPTY (-2) -#define YYEOF 0 - -#define YYACCEPT goto yyacceptlab -#define YYABORT goto yyabortlab -#define YYERROR goto yyerrorlab - - -/* Like YYERROR except do call yyerror. This remains here temporarily - to ease the transition to the new meaning of YYERROR, for GCC. - Once GCC version 2 has supplanted version 1, this can go. */ - -#define YYFAIL goto yyerrlab - -#define YYRECOVERING() (!!yyerrstatus) - -#define YYBACKUP(Token, Value) \ -do \ - if (yychar == YYEMPTY && yylen == 1) \ - { \ - yychar = (Token); \ - yylval = (Value); \ - yytoken = YYTRANSLATE (yychar); \ - YYPOPSTACK (1); \ - goto yybackup; \ - } \ - else \ - { \ - yyerror (YY_("syntax error: cannot back up")); \ - YYERROR; \ - } \ -while (YYID (0)) - - -#define YYTERROR 1 -#define YYERRCODE 256 - - -/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. - If N is 0, then set CURRENT to the empty location which ends - the previous symbol: RHS[0] (always defined). */ - -#define YYRHSLOC(Rhs, K) ((Rhs)[K]) -#ifndef YYLLOC_DEFAULT -# define YYLLOC_DEFAULT(Current, Rhs, N) \ - do \ - if (YYID (N)) \ - { \ - (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ - (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ - (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ - (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ - } \ - else \ - { \ - (Current).first_line = (Current).last_line = \ - YYRHSLOC (Rhs, 0).last_line; \ - (Current).first_column = (Current).last_column = \ - YYRHSLOC (Rhs, 0).last_column; \ - } \ - while (YYID (0)) -#endif - - -/* YY_LOCATION_PRINT -- Print the location on the stream. - This macro was not mandated originally: define only if we know - we won't break user code: when these are the locations we know. */ - -#ifndef YY_LOCATION_PRINT -# if YYLTYPE_IS_TRIVIAL -# define YY_LOCATION_PRINT(File, Loc) \ - fprintf (File, "%d.%d-%d.%d", \ - (Loc).first_line, (Loc).first_column, \ - (Loc).last_line, (Loc).last_column) -# else -# define YY_LOCATION_PRINT(File, Loc) ((void) 0) -# endif -#endif - - -/* YYLEX -- calling `yylex' with the right arguments. */ - -#ifdef YYLEX_PARAM -# define YYLEX yylex (YYLEX_PARAM) -#else -# define YYLEX yylex () -#endif - -/* Enable debugging if requested. */ -#if YYDEBUG - -# ifndef YYFPRINTF -# include /* INFRINGES ON USER NAME SPACE */ -# define YYFPRINTF fprintf -# endif - -# define YYDPRINTF(Args) \ -do { \ - if (yydebug) \ - YYFPRINTF Args; \ -} while (YYID (0)) - -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ -do { \ - if (yydebug) \ - { \ - YYFPRINTF (stderr, "%s ", Title); \ - yy_symbol_print (stderr, \ - Type, Value, Location); \ - YYFPRINTF (stderr, "\n"); \ - } \ -} while (YYID (0)) - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) -#else -static void -yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; - YYLTYPE const * const yylocationp; -#endif -{ - if (!yyvaluep) - return; - YYUSE (yylocationp); -# ifdef YYPRINT - if (yytype < YYNTOKENS) - YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); -# else - YYUSE (yyoutput); -# endif - switch (yytype) - { - default: - break; - } -} - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) -#else -static void -yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; - YYLTYPE const * const yylocationp; -#endif -{ - if (yytype < YYNTOKENS) - YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); - else - YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); - - YY_LOCATION_PRINT (yyoutput, *yylocationp); - YYFPRINTF (yyoutput, ": "); - yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp); - YYFPRINTF (yyoutput, ")"); -} - -/*------------------------------------------------------------------. -| yy_stack_print -- Print the state stack from its BOTTOM up to its | -| TOP (included). | -`------------------------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) -#else -static void -yy_stack_print (bottom, top) - yytype_int16 *bottom; - yytype_int16 *top; -#endif -{ - YYFPRINTF (stderr, "Stack now"); - for (; bottom <= top; ++bottom) - YYFPRINTF (stderr, " %d", *bottom); - YYFPRINTF (stderr, "\n"); -} - -# define YY_STACK_PRINT(Bottom, Top) \ -do { \ - if (yydebug) \ - yy_stack_print ((Bottom), (Top)); \ -} while (YYID (0)) - - -/*------------------------------------------------. -| Report that the YYRULE is going to be reduced. | -`------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule) -#else -static void -yy_reduce_print (yyvsp, yylsp, yyrule) - YYSTYPE *yyvsp; - YYLTYPE *yylsp; - int yyrule; -#endif -{ - int yynrhs = yyr2[yyrule]; - int yyi; - unsigned long int yylno = yyrline[yyrule]; - YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", - yyrule - 1, yylno); - /* The symbols being reduced. */ - for (yyi = 0; yyi < yynrhs; yyi++) - { - fprintf (stderr, " $%d = ", yyi + 1); - yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], - &(yyvsp[(yyi + 1) - (yynrhs)]) - , &(yylsp[(yyi + 1) - (yynrhs)]) ); - fprintf (stderr, "\n"); - } -} - -# define YY_REDUCE_PRINT(Rule) \ -do { \ - if (yydebug) \ - yy_reduce_print (yyvsp, yylsp, Rule); \ -} while (YYID (0)) - -/* Nonzero means print parse trace. It is left uninitialized so that - multiple parsers can coexist. */ -int yydebug; -#else /* !YYDEBUG */ -# define YYDPRINTF(Args) -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) -# define YY_STACK_PRINT(Bottom, Top) -# define YY_REDUCE_PRINT(Rule) -#endif /* !YYDEBUG */ - - -/* YYINITDEPTH -- initial size of the parser's stacks. */ -#ifndef YYINITDEPTH -# define YYINITDEPTH 200 -#endif - -/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only - if the built-in stack extension method is used). - - Do not make this value too large; the results are undefined if - YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) - evaluated with infinite-precision integer arithmetic. */ - -#ifndef YYMAXDEPTH -# define YYMAXDEPTH 10000 -#endif - - - -#if YYERROR_VERBOSE - -# ifndef yystrlen -# if defined __GLIBC__ && defined _STRING_H -# define yystrlen strlen -# else -/* Return the length of YYSTR. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static YYSIZE_T -yystrlen (const char *yystr) -#else -static YYSIZE_T -yystrlen (yystr) - const char *yystr; -#endif -{ - YYSIZE_T yylen; - for (yylen = 0; yystr[yylen]; yylen++) - continue; - return yylen; -} -# endif -# endif - -# ifndef yystpcpy -# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE -# define yystpcpy stpcpy -# else -/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in - YYDEST. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static char * -yystpcpy (char *yydest, const char *yysrc) -#else -static char * -yystpcpy (yydest, yysrc) - char *yydest; - const char *yysrc; -#endif -{ - char *yyd = yydest; - const char *yys = yysrc; - - while ((*yyd++ = *yys++) != '\0') - continue; - - return yyd - 1; -} -# endif -# endif - -# ifndef yytnamerr -/* Copy to YYRES the contents of YYSTR after stripping away unnecessary - quotes and backslashes, so that it's suitable for yyerror. The - heuristic is that double-quoting is unnecessary unless the string - contains an apostrophe, a comma, or backslash (other than - backslash-backslash). YYSTR is taken from yytname. If YYRES is - null, do not copy; instead, return the length of what the result - would have been. */ -static YYSIZE_T -yytnamerr (char *yyres, const char *yystr) -{ - if (*yystr == '"') - { - YYSIZE_T yyn = 0; - char const *yyp = yystr; - - for (;;) - switch (*++yyp) - { - case '\'': - case ',': - goto do_not_strip_quotes; - - case '\\': - if (*++yyp != '\\') - goto do_not_strip_quotes; - /* Fall through. */ - default: - if (yyres) - yyres[yyn] = *yyp; - yyn++; - break; - - case '"': - if (yyres) - yyres[yyn] = '\0'; - return yyn; - } - do_not_strip_quotes: ; - } - - if (! yyres) - return yystrlen (yystr); - - return yystpcpy (yyres, yystr) - yyres; -} -# endif - -/* Copy into YYRESULT an error message about the unexpected token - YYCHAR while in state YYSTATE. Return the number of bytes copied, - including the terminating null byte. If YYRESULT is null, do not - copy anything; just return the number of bytes that would be - copied. As a special case, return 0 if an ordinary "syntax error" - message will do. Return YYSIZE_MAXIMUM if overflow occurs during - size calculation. */ -static YYSIZE_T -yysyntax_error (char *yyresult, int yystate, int yychar) -{ - int yyn = yypact[yystate]; - - if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) - return 0; - else - { - int yytype = YYTRANSLATE (yychar); - YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); - YYSIZE_T yysize = yysize0; - YYSIZE_T yysize1; - int yysize_overflow = 0; - enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; - char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; - int yyx; - -# if 0 - /* This is so xgettext sees the translatable formats that are - constructed on the fly. */ - YY_("syntax error, unexpected %s"); - YY_("syntax error, unexpected %s, expecting %s"); - YY_("syntax error, unexpected %s, expecting %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); -# endif - char *yyfmt; - char const *yyf; - static char const yyunexpected[] = "syntax error, unexpected %s"; - static char const yyexpecting[] = ", expecting %s"; - static char const yyor[] = " or %s"; - char yyformat[sizeof yyunexpected - + sizeof yyexpecting - 1 - + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) - * (sizeof yyor - 1))]; - char const *yyprefix = yyexpecting; - - /* Start YYX at -YYN if negative to avoid negative indexes in - YYCHECK. */ - int yyxbegin = yyn < 0 ? -yyn : 0; - - /* Stay within bounds of both yycheck and yytname. */ - int yychecklim = YYLAST - yyn + 1; - int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; - int yycount = 1; - - yyarg[0] = yytname[yytype]; - yyfmt = yystpcpy (yyformat, yyunexpected); - - for (yyx = yyxbegin; yyx < yyxend; ++yyx) - if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) - { - if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) - { - yycount = 1; - yysize = yysize0; - yyformat[sizeof yyunexpected - 1] = '\0'; - break; - } - yyarg[yycount++] = yytname[yyx]; - yysize1 = yysize + yytnamerr (0, yytname[yyx]); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - yyfmt = yystpcpy (yyfmt, yyprefix); - yyprefix = yyor; - } - - yyf = YY_(yyformat); - yysize1 = yysize + yystrlen (yyf); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - - if (yysize_overflow) - return YYSIZE_MAXIMUM; - - if (yyresult) - { - /* Avoid sprintf, as that infringes on the user's name space. - Don't have undefined behavior even if the translation - produced a string with the wrong number of "%s"s. */ - char *yyp = yyresult; - int yyi = 0; - while ((*yyp = *yyf) != '\0') - { - if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) - { - yyp += yytnamerr (yyp, yyarg[yyi++]); - yyf += 2; - } - else - { - yyp++; - yyf++; - } - } - } - return yysize; - } -} -#endif /* YYERROR_VERBOSE */ - - -/*-----------------------------------------------. -| Release the memory associated to this symbol. | -`-----------------------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp) -#else -static void -yydestruct (yymsg, yytype, yyvaluep, yylocationp) - const char *yymsg; - int yytype; - YYSTYPE *yyvaluep; - YYLTYPE *yylocationp; -#endif -{ - YYUSE (yyvaluep); - YYUSE (yylocationp); - - if (!yymsg) - yymsg = "Deleting"; - YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); - - switch (yytype) - { - - default: - break; - } -} - - -/* Prevent warnings from -Wmissing-prototypes. */ - -#ifdef YYPARSE_PARAM -#if defined __STDC__ || defined __cplusplus -int yyparse (void *YYPARSE_PARAM); -#else -int yyparse (); -#endif -#else /* ! YYPARSE_PARAM */ -#if defined __STDC__ || defined __cplusplus -int yyparse (void); -#else -int yyparse (); -#endif -#endif /* ! YYPARSE_PARAM */ - - - -/* The look-ahead symbol. */ -int yychar; - -/* The semantic value of the look-ahead symbol. */ -YYSTYPE yylval; - -/* Number of syntax errors so far. */ -int yynerrs; -/* Location data for the look-ahead symbol. */ -YYLTYPE yylloc; - - - -/*----------. -| yyparse. | -`----------*/ - -#ifdef YYPARSE_PARAM -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void *YYPARSE_PARAM) -#else -int -yyparse (YYPARSE_PARAM) - void *YYPARSE_PARAM; -#endif -#else /* ! YYPARSE_PARAM */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void) -#else -int -yyparse () - -#endif -#endif -{ - - int yystate; - int yyn; - int yyresult; - /* Number of tokens to shift before error messages enabled. */ - int yyerrstatus; - /* Look-ahead token as an internal (translated) token number. */ - int yytoken = 0; -#if YYERROR_VERBOSE - /* Buffer for error messages, and its allocated size. */ - char yymsgbuf[128]; - char *yymsg = yymsgbuf; - YYSIZE_T yymsg_alloc = sizeof yymsgbuf; -#endif - - /* Three stacks and their tools: - `yyss': related to states, - `yyvs': related to semantic values, - `yyls': related to locations. - - Refer to the stacks thru separate pointers, to allow yyoverflow - to reallocate them elsewhere. */ - - /* The state stack. */ - yytype_int16 yyssa[YYINITDEPTH]; - yytype_int16 *yyss = yyssa; - yytype_int16 *yyssp; - - /* The semantic value stack. */ - YYSTYPE yyvsa[YYINITDEPTH]; - YYSTYPE *yyvs = yyvsa; - YYSTYPE *yyvsp; - - /* The location stack. */ - YYLTYPE yylsa[YYINITDEPTH]; - YYLTYPE *yyls = yylsa; - YYLTYPE *yylsp; - /* The locations where the error started and ended. */ - YYLTYPE yyerror_range[2]; - -#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N)) - - YYSIZE_T yystacksize = YYINITDEPTH; - - /* The variables used to return semantic value and location from the - action routines. */ - YYSTYPE yyval; - YYLTYPE yyloc; - - /* The number of symbols on the RHS of the reduced rule. - Keep to zero when no symbol should be popped. */ - int yylen = 0; - - YYDPRINTF ((stderr, "Starting parse\n")); - - yystate = 0; - yyerrstatus = 0; - yynerrs = 0; - yychar = YYEMPTY; /* Cause a token to be read. */ - - /* Initialize stack pointers. - Waste one element of value and location stack - so that they stay on the same level as the state stack. - The wasted elements are never initialized. */ - - yyssp = yyss; - yyvsp = yyvs; - yylsp = yyls; -#if YYLTYPE_IS_TRIVIAL - /* Initialize the default location before parsing starts. */ - yylloc.first_line = yylloc.last_line = 1; - yylloc.first_column = yylloc.last_column = 0; -#endif - - goto yysetstate; - -/*------------------------------------------------------------. -| yynewstate -- Push a new state, which is found in yystate. | -`------------------------------------------------------------*/ - yynewstate: - /* In all cases, when you get here, the value and location stacks - have just been pushed. So pushing a state here evens the stacks. */ - yyssp++; - - yysetstate: - *yyssp = yystate; - - if (yyss + yystacksize - 1 <= yyssp) - { - /* Get the current used size of the three stacks, in elements. */ - YYSIZE_T yysize = yyssp - yyss + 1; - -#ifdef yyoverflow - { - /* Give user a chance to reallocate the stack. Use copies of - these so that the &'s don't force the real ones into - memory. */ - YYSTYPE *yyvs1 = yyvs; - yytype_int16 *yyss1 = yyss; - YYLTYPE *yyls1 = yyls; - - /* Each stack pointer address is followed by the size of the - data in use in that stack, in bytes. This used to be a - conditional around just the two extra args, but that might - be undefined if yyoverflow is a macro. */ - yyoverflow (YY_("memory exhausted"), - &yyss1, yysize * sizeof (*yyssp), - &yyvs1, yysize * sizeof (*yyvsp), - &yyls1, yysize * sizeof (*yylsp), - &yystacksize); - yyls = yyls1; - yyss = yyss1; - yyvs = yyvs1; - } -#else /* no yyoverflow */ -# ifndef YYSTACK_RELOCATE - goto yyexhaustedlab; -# else - /* Extend the stack our own way. */ - if (YYMAXDEPTH <= yystacksize) - goto yyexhaustedlab; - yystacksize *= 2; - if (YYMAXDEPTH < yystacksize) - yystacksize = YYMAXDEPTH; - - { - yytype_int16 *yyss1 = yyss; - union yyalloc *yyptr = - (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); - if (! yyptr) - goto yyexhaustedlab; - YYSTACK_RELOCATE (yyss); - YYSTACK_RELOCATE (yyvs); - YYSTACK_RELOCATE (yyls); -# undef YYSTACK_RELOCATE - if (yyss1 != yyssa) - YYSTACK_FREE (yyss1); - } -# endif -#endif /* no yyoverflow */ - - yyssp = yyss + yysize - 1; - yyvsp = yyvs + yysize - 1; - yylsp = yyls + yysize - 1; - - YYDPRINTF ((stderr, "Stack size increased to %lu\n", - (unsigned long int) yystacksize)); - - if (yyss + yystacksize - 1 <= yyssp) - YYABORT; - } - - YYDPRINTF ((stderr, "Entering state %d\n", yystate)); - - goto yybackup; - -/*-----------. -| yybackup. | -`-----------*/ -yybackup: - - /* Do appropriate processing given the current state. Read a - look-ahead token if we need one and don't already have one. */ - - /* First try to decide what to do without reference to look-ahead token. */ - yyn = yypact[yystate]; - if (yyn == YYPACT_NINF) - goto yydefault; - - /* Not known => get a look-ahead token if don't already have one. */ - - /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ - if (yychar == YYEMPTY) - { - YYDPRINTF ((stderr, "Reading a token: ")); - yychar = YYLEX; - } - - if (yychar <= YYEOF) - { - yychar = yytoken = YYEOF; - YYDPRINTF ((stderr, "Now at end of input.\n")); - } - else - { - yytoken = YYTRANSLATE (yychar); - YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); - } - - /* If the proper action on seeing token YYTOKEN is to reduce or to - detect an error, take that action. */ - yyn += yytoken; - if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) - goto yydefault; - yyn = yytable[yyn]; - if (yyn <= 0) - { - if (yyn == 0 || yyn == YYTABLE_NINF) - goto yyerrlab; - yyn = -yyn; - goto yyreduce; - } - - if (yyn == YYFINAL) - YYACCEPT; - - /* Count tokens shifted since error; after three, turn off error - status. */ - if (yyerrstatus) - yyerrstatus--; - - /* Shift the look-ahead token. */ - YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); - - /* Discard the shifted token unless it is eof. */ - if (yychar != YYEOF) - yychar = YYEMPTY; - - yystate = yyn; - *++yyvsp = yylval; - *++yylsp = yylloc; - goto yynewstate; - - -/*-----------------------------------------------------------. -| yydefault -- do the default action for the current state. | -`-----------------------------------------------------------*/ -yydefault: - yyn = yydefact[yystate]; - if (yyn == 0) - goto yyerrlab; - goto yyreduce; - - -/*-----------------------------. -| yyreduce -- Do a reduction. | -`-----------------------------*/ -yyreduce: - /* yyn is the number of a rule to reduce with. */ - yylen = yyr2[yyn]; - - /* If YYLEN is nonzero, implement the default value of the action: - `$$ = $1'. - - Otherwise, the following line sets YYVAL to garbage. - This behavior is undocumented and Bison - users should not rely upon it. Assigning to YYVAL - unconditionally makes the parser a bit smaller, and it avoids a - GCC warning that YYVAL may be used uninitialized. */ - yyval = yyvsp[1-yylen]; - - /* Default location. */ - YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); - YY_REDUCE_PRINT (yyn); - switch (yyn) - { - case 2: -#line 90 "dtc-parser.y" - { - the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0); - ;} - break; - - case 3: -#line 94 "dtc-parser.y" - { - the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0); - ;} - break; - - case 4: -#line 101 "dtc-parser.y" - { - (yyval.re) = NULL; - ;} - break; - - case 5: -#line 105 "dtc-parser.y" - { - (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} - break; - - case 6: -#line 112 "dtc-parser.y" - { - (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref)); - ;} - break; - - case 7: -#line 119 "dtc-parser.y" - { - (yyval.re) = NULL; - ;} - break; - - case 8: -#line 123 "dtc-parser.y" - { - (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} - break; - - case 9: -#line 130 "dtc-parser.y" - { - (yyval.re) = (yyvsp[(1) - (1)].re); - ;} - break; - - case 10: -#line 134 "dtc-parser.y" - { - (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref)); - ;} - break; - - case 11: -#line 141 "dtc-parser.y" - { - (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); - ;} - break; - - case 12: -#line 145 "dtc-parser.y" - { - (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64); - ;} - break; - - case 13: -#line 152 "dtc-parser.y" - { - (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL); - ;} - break; - - case 14: -#line 159 "dtc-parser.y" - { - (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); - ;} - break; - - case 15: -#line 166 "dtc-parser.y" - { - (yyval.proplist) = NULL; - ;} - break; - - case 16: -#line 170 "dtc-parser.y" - { - (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); - ;} - break; - - case 17: -#line 177 "dtc-parser.y" - { - (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref)); - ;} - break; - - case 18: -#line 181 "dtc-parser.y" - { - (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref)); - ;} - break; - - case 19: -#line 188 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); - ;} - break; - - case 20: -#line 192 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} - break; - - case 21: -#line 196 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} - break; - - case 22: -#line 200 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 23: -#line 204 "dtc-parser.y" - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path); - struct data d = empty_data; - - if ((yyvsp[(6) - (9)].addr) != 0) - if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0) - yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)(yyvsp[(6) - (9)].addr), - (yyvsp[(4) - (9)].data).val, strerror(errno)); - - d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr)); - - (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); - dtc_close_file(file); - ;} - break; - - case 24: -#line 221 "dtc-parser.y" - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path); - struct data d = empty_data; - - d = data_copy_file(file->file, -1); - - (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); - dtc_close_file(file); - ;} - break; - - case 25: -#line 232 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 26: -#line 239 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 27: -#line 243 "dtc-parser.y" - { - (yyval.data) = (yyvsp[(1) - (2)].data); - ;} - break; - - case 28: -#line 247 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 29: -#line 254 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 30: -#line 258 "dtc-parser.y" - { - (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell)); - ;} - break; - - case 31: -#line 262 "dtc-parser.y" - { - (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE, - (yyvsp[(2) - (2)].labelref)), -1); - ;} - break; - - case 32: -#line 267 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 33: -#line 274 "dtc-parser.y" - { - (yyval.cbase) = 16; - ;} - break; - - case 35: -#line 282 "dtc-parser.y" - { - (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32); - ;} - break; - - case 36: -#line 286 "dtc-parser.y" - { - (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32); - ;} - break; - - case 37: -#line 293 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 38: -#line 297 "dtc-parser.y" - { - (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); - ;} - break; - - case 39: -#line 301 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 40: -#line 308 "dtc-parser.y" - { - (yyval.nodelist) = NULL; - ;} - break; - - case 41: -#line 312 "dtc-parser.y" - { - (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); - ;} - break; - - case 42: -#line 316 "dtc-parser.y" - { - yyerror("syntax error: properties must precede subnodes"); - YYERROR; - ;} - break; - - case 43: -#line 324 "dtc-parser.y" - { - (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref)); - ;} - break; - - case 44: -#line 331 "dtc-parser.y" - { - (yyval.labelref) = NULL; - ;} - break; - - case 45: -#line 335 "dtc-parser.y" - { - (yyval.labelref) = (yyvsp[(1) - (1)].labelref); - ;} - break; - - -/* Line 1267 of yacc.c. */ -#line 1780 "dtc-parser.tab.c" - default: break; - } - YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); - - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - - *++yyvsp = yyval; - *++yylsp = yyloc; - - /* Now `shift' the result of the reduction. Determine what state - that goes to, based on the state we popped back to and the rule - number reduced by. */ - - yyn = yyr1[yyn]; - - yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; - if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) - yystate = yytable[yystate]; - else - yystate = yydefgoto[yyn - YYNTOKENS]; - - goto yynewstate; - - -/*------------------------------------. -| yyerrlab -- here on detecting error | -`------------------------------------*/ -yyerrlab: - /* If not already recovering from an error, report this error. */ - if (!yyerrstatus) - { - ++yynerrs; -#if ! YYERROR_VERBOSE - yyerror (YY_("syntax error")); -#else - { - YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); - if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) - { - YYSIZE_T yyalloc = 2 * yysize; - if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) - yyalloc = YYSTACK_ALLOC_MAXIMUM; - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); - yymsg = (char *) YYSTACK_ALLOC (yyalloc); - if (yymsg) - yymsg_alloc = yyalloc; - else - { - yymsg = yymsgbuf; - yymsg_alloc = sizeof yymsgbuf; - } - } - - if (0 < yysize && yysize <= yymsg_alloc) - { - (void) yysyntax_error (yymsg, yystate, yychar); - yyerror (yymsg); - } - else - { - yyerror (YY_("syntax error")); - if (yysize != 0) - goto yyexhaustedlab; - } - } -#endif - } - - yyerror_range[0] = yylloc; - - if (yyerrstatus == 3) - { - /* If just tried and failed to reuse look-ahead token after an - error, discard it. */ - - if (yychar <= YYEOF) - { - /* Return failure if at end of input. */ - if (yychar == YYEOF) - YYABORT; - } - else - { - yydestruct ("Error: discarding", - yytoken, &yylval, &yylloc); - yychar = YYEMPTY; - } - } - - /* Else will try to reuse look-ahead token after shifting the error - token. */ - goto yyerrlab1; - - -/*---------------------------------------------------. -| yyerrorlab -- error raised explicitly by YYERROR. | -`---------------------------------------------------*/ -yyerrorlab: - - /* Pacify compilers like GCC when the user code never invokes - YYERROR and the label yyerrorlab therefore never appears in user - code. */ - if (/*CONSTCOND*/ 0) - goto yyerrorlab; - - yyerror_range[0] = yylsp[1-yylen]; - /* Do not reclaim the symbols of the rule which action triggered - this YYERROR. */ - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - yystate = *yyssp; - goto yyerrlab1; - - -/*-------------------------------------------------------------. -| yyerrlab1 -- common code for both syntax error and YYERROR. | -`-------------------------------------------------------------*/ -yyerrlab1: - yyerrstatus = 3; /* Each real token shifted decrements this. */ - - for (;;) - { - yyn = yypact[yystate]; - if (yyn != YYPACT_NINF) - { - yyn += YYTERROR; - if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) - { - yyn = yytable[yyn]; - if (0 < yyn) - break; - } - } - - /* Pop the current state because it cannot handle the error token. */ - if (yyssp == yyss) - YYABORT; - - yyerror_range[0] = *yylsp; - yydestruct ("Error: popping", - yystos[yystate], yyvsp, yylsp); - YYPOPSTACK (1); - yystate = *yyssp; - YY_STACK_PRINT (yyss, yyssp); - } - - if (yyn == YYFINAL) - YYACCEPT; - - *++yyvsp = yylval; - - yyerror_range[1] = yylloc; - /* Using YYLLOC is tempting, but would change the location of - the look-ahead. YYLOC is available though. */ - YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2); - *++yylsp = yyloc; - - /* Shift the error token. */ - YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); - - yystate = yyn; - goto yynewstate; - - -/*-------------------------------------. -| yyacceptlab -- YYACCEPT comes here. | -`-------------------------------------*/ -yyacceptlab: - yyresult = 0; - goto yyreturn; - -/*-----------------------------------. -| yyabortlab -- YYABORT comes here. | -`-----------------------------------*/ -yyabortlab: - yyresult = 1; - goto yyreturn; - -#ifndef yyoverflow -/*-------------------------------------------------. -| yyexhaustedlab -- memory exhaustion comes here. | -`-------------------------------------------------*/ -yyexhaustedlab: - yyerror (YY_("memory exhausted")); - yyresult = 2; - /* Fall through. */ -#endif - -yyreturn: - if (yychar != YYEOF && yychar != YYEMPTY) - yydestruct ("Cleanup: discarding lookahead", - yytoken, &yylval, &yylloc); - /* Do not reclaim the symbols of the rule which action triggered - this YYABORT or YYACCEPT. */ - YYPOPSTACK (yylen); - YY_STACK_PRINT (yyss, yyssp); - while (yyssp != yyss) - { - yydestruct ("Cleanup: popping", - yystos[*yyssp], yyvsp, yylsp); - YYPOPSTACK (1); - } -#ifndef yyoverflow - if (yyss != yyssa) - YYSTACK_FREE (yyss); -#endif -#if YYERROR_VERBOSE - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); -#endif - /* Make sure YYID is used. */ - return YYID (yyresult); -} - - -#line 340 "dtc-parser.y" - - -void yyerrorf(char const *s, ...) -{ - const char *fname = srcpos_file ? srcpos_file->name : ""; - va_list va; - va_start(va, s); - - if (strcmp(fname, "-") == 0) - fname = "stdin"; - - fprintf(stderr, "%s:%d ", fname, yylloc.first_line); - vfprintf(stderr, s, va); - fprintf(stderr, "\n"); - - treesource_error = 1; - va_end(va); -} - -void yyerror (char const *s) -{ - yyerrorf("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) - yyerror("bad characters in literal"); - else if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - yyerror("literal out of range"); - else if (errno != 0) - yyerror("bad literal"); - return val; -} - diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped deleted file mode 100644 index ba99100..0000000 --- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped +++ /dev/null @@ -1,113 +0,0 @@ -/* A Bison parser, made by GNU Bison 2.3. */ - -/* Skeleton interface for Bison's Yacc-like parsers in C - - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -/* As a special exception, you may create a larger work that contains - part or all of the Bison parser skeleton and distribute that work - under terms of your choice, so long as that work isn't itself a - parser generator using the skeleton or a modified version thereof - as a parser skeleton. Alternatively, if you modify or redistribute - the parser skeleton itself, you may (at your option) remove this - special exception, which will cause the skeleton and the resulting - Bison output files to be licensed under the GNU General Public - License without this special exception. - - This special exception was added by the Free Software Foundation in - version 2.2 of Bison. */ - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_PROPNODENAME = 260, - DT_LITERAL = 261, - DT_LEGACYLITERAL = 262, - DT_BASE = 263, - DT_BYTE = 264, - DT_STRING = 265, - DT_LABEL = 266, - DT_REF = 267, - DT_INCBIN = 268 - }; -#endif -/* Tokens. */ -#define DT_V1 258 -#define DT_MEMRESERVE 259 -#define DT_PROPNODENAME 260 -#define DT_LITERAL 261 -#define DT_LEGACYLITERAL 262 -#define DT_BASE 263 -#define DT_BYTE 264 -#define DT_STRING 265 -#define DT_LABEL 266 -#define DT_REF 267 -#define DT_INCBIN 268 - - - - -#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE -#line 37 "dtc-parser.y" -{ - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} -/* Line 1489 of yacc.c. */ -#line 92 "dtc-parser.tab.h" - YYSTYPE; -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ -# define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 -#endif - -extern YYSTYPE yylval; - -#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED -typedef struct YYLTYPE -{ - int first_line; - int first_column; - int last_line; - int last_column; -} YYLTYPE; -# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ -# define YYLTYPE_IS_DECLARED 1 -# define YYLTYPE_IS_TRIVIAL 1 -#endif - -extern YYLTYPE yylloc; diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/arch/powerpc/boot/dtc-src/dtc-parser.y deleted file mode 100644 index b2ab562..0000000 --- a/arch/powerpc/boot/dtc-src/dtc-parser.y +++ /dev/null @@ -1,379 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -%locations - -%{ -#include - -#include "dtc.h" -#include "srcpos.h" - -extern int yylex(void); - -extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); -%} - -%union { - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} - -%token DT_V1 -%token DT_MEMRESERVE -%token DT_PROPNODENAME -%token DT_LITERAL -%token DT_LEGACYLITERAL -%token DT_BASE -%token DT_BYTE -%token DT_STRING -%token DT_LABEL -%token DT_REF -%token DT_INCBIN - -%type propdata -%type propdataprefix -%type memreserve -%type memreserves -%type v0_memreserve -%type v0_memreserves -%type addr -%type celllist -%type cellbase -%type cellval -%type bytestring -%type propdef -%type proplist - -%type devicetree -%type nodedef -%type subnode -%type subnodes -%type label - -%% - -sourcefile: - DT_V1 ';' memreserves devicetree - { - the_boot_info = build_boot_info($3, $4, 0); - } - | v0_memreserves devicetree - { - the_boot_info = build_boot_info($1, $2, 0); - } - ; - -memreserves: - /* empty */ - { - $$ = NULL; - } - | memreserve memreserves - { - $$ = chain_reserve_entry($1, $2); - } - ; - -memreserve: - label DT_MEMRESERVE addr addr ';' - { - $$ = build_reserve_entry($3, $4, $1); - } - ; - -v0_memreserves: - /* empty */ - { - $$ = NULL; - } - | v0_memreserve v0_memreserves - { - $$ = chain_reserve_entry($1, $2); - }; - ; - -v0_memreserve: - memreserve - { - $$ = $1; - } - | label DT_MEMRESERVE addr '-' addr ';' - { - $$ = build_reserve_entry($3, $5 - $3 + 1, $1); - } - ; - -addr: - DT_LITERAL - { - $$ = eval_literal($1, 0, 64); - } - | DT_LEGACYLITERAL - { - $$ = eval_literal($1, 16, 64); - } - ; - -devicetree: - '/' nodedef - { - $$ = name_node($2, "", NULL); - } - ; - -nodedef: - '{' proplist subnodes '}' ';' - { - $$ = build_node($2, $3); - } - ; - -proplist: - /* empty */ - { - $$ = NULL; - } - | proplist propdef - { - $$ = chain_property($2, $1); - } - ; - -propdef: - label DT_PROPNODENAME '=' propdata ';' - { - $$ = build_property($2, $4, $1); - } - | label DT_PROPNODENAME ';' - { - $$ = build_property($2, empty_data, $1); - } - ; - -propdata: - propdataprefix DT_STRING - { - $$ = data_merge($1, $2); - } - | propdataprefix '<' celllist '>' - { - $$ = data_merge($1, $3); - } - | propdataprefix '[' bytestring ']' - { - $$ = data_merge($1, $3); - } - | propdataprefix DT_REF - { - $$ = data_add_marker($1, REF_PATH, $2); - } - | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')' - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file($4.val, &path); - struct data d = empty_data; - - if ($6 != 0) - if (fseek(file->file, $6, SEEK_SET) != 0) - yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)$6, - $4.val, strerror(errno)); - - d = data_copy_file(file->file, $8); - - $$ = data_merge($1, d); - dtc_close_file(file); - } - | propdataprefix DT_INCBIN '(' DT_STRING ')' - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file($4.val, &path); - struct data d = empty_data; - - d = data_copy_file(file->file, -1); - - $$ = data_merge($1, d); - dtc_close_file(file); - } - | propdata DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -propdataprefix: - /* empty */ - { - $$ = empty_data; - } - | propdata ',' - { - $$ = $1; - } - | propdataprefix DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -celllist: - /* empty */ - { - $$ = empty_data; - } - | celllist cellval - { - $$ = data_append_cell($1, $2); - } - | celllist DT_REF - { - $$ = data_append_cell(data_add_marker($1, REF_PHANDLE, - $2), -1); - } - | celllist DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -cellbase: - /* empty */ - { - $$ = 16; - } - | DT_BASE - ; - -cellval: - DT_LITERAL - { - $$ = eval_literal($1, 0, 32); - } - | cellbase DT_LEGACYLITERAL - { - $$ = eval_literal($2, $1, 32); - } - ; - -bytestring: - /* empty */ - { - $$ = empty_data; - } - | bytestring DT_BYTE - { - $$ = data_append_byte($1, $2); - } - | bytestring DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -subnodes: - /* empty */ - { - $$ = NULL; - } - | subnode subnodes - { - $$ = chain_node($1, $2); - } - | subnode propdef - { - yyerror("syntax error: properties must precede subnodes"); - YYERROR; - } - ; - -subnode: - label DT_PROPNODENAME nodedef - { - $$ = name_node($3, $2, $1); - } - ; - -label: - /* empty */ - { - $$ = NULL; - } - | DT_LABEL - { - $$ = $1; - } - ; - -%% - -void yyerrorf(char const *s, ...) -{ - const char *fname = srcpos_file ? srcpos_file->name : ""; - va_list va; - va_start(va, s); - - if (strcmp(fname, "-") == 0) - fname = "stdin"; - - fprintf(stderr, "%s:%d ", fname, yylloc.first_line); - vfprintf(stderr, s, va); - fprintf(stderr, "\n"); - - treesource_error = 1; - va_end(va); -} - -void yyerror (char const *s) -{ - yyerrorf("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) - yyerror("bad characters in literal"); - else if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - yyerror("literal out of range"); - else if (errno != 0) - yyerror("bad literal"); - return val; -} diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/arch/powerpc/boot/dtc-src/dtc.c deleted file mode 100644 index d8fd43b..0000000 --- a/arch/powerpc/boot/dtc-src/dtc.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -#include "version_gen.h" - -/* - * Command line options - */ -int quiet; /* Level of quietness */ -int reservenum; /* Number of memory reservation slots */ -int minsize; /* Minimum blob size */ -int padsize; /* Additional padding to blob */ - -char *join_path(const char *path, const char *name) -{ - int lenp = strlen(path); - int lenn = strlen(name); - int len; - int needslash = 1; - char *str; - - len = lenp + lenn + 2; - if ((lenp > 0) && (path[lenp-1] == '/')) { - needslash = 0; - len--; - } - - str = xmalloc(len); - memcpy(str, path, lenp); - if (needslash) { - str[lenp] = '/'; - lenp++; - } - memcpy(str+lenp, name, lenn+1); - return str; -} - -static void fill_fullpaths(struct node *tree, const char *prefix) -{ - struct node *child; - const char *unit; - - tree->fullpath = join_path(prefix, tree->name); - - unit = strchr(tree->name, '@'); - if (unit) - tree->basenamelen = unit - tree->name; - else - tree->basenamelen = strlen(tree->name); - - for_each_child(tree, child) - fill_fullpaths(child, tree->fullpath); -} - -static void __attribute__ ((noreturn)) usage(void) -{ - fprintf(stderr, "Usage:\n"); - fprintf(stderr, "\tdtc [options] \n"); - fprintf(stderr, "\nOptions:\n"); - fprintf(stderr, "\t-h\n"); - fprintf(stderr, "\t\tThis help text\n"); - fprintf(stderr, "\t-q\n"); - fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n"); - fprintf(stderr, "\t-I \n"); - fprintf(stderr, "\t\tInput formats are:\n"); - fprintf(stderr, "\t\t\tdts - device tree source text\n"); - fprintf(stderr, "\t\t\tdtb - device tree blob\n"); - fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n"); - fprintf(stderr, "\t-o \n"); - fprintf(stderr, "\t-O \n"); - fprintf(stderr, "\t\tOutput formats are:\n"); - fprintf(stderr, "\t\t\tdts - device tree source text\n"); - fprintf(stderr, "\t\t\tdtb - device tree blob\n"); - fprintf(stderr, "\t\t\tasm - assembler source\n"); - fprintf(stderr, "\t-V \n"); - fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION); - fprintf(stderr, "\t-R \n"); - fprintf(stderr, "\t\tMake space for reserve map entries (relevant for \n\t\tdtb and asm output only)\n"); - fprintf(stderr, "\t-S \n"); - fprintf(stderr, "\t\tMake the blob at least long (extra space)\n"); - fprintf(stderr, "\t-p \n"); - fprintf(stderr, "\t\tAdd padding to the blob of long (extra space)\n"); - fprintf(stderr, "\t-b \n"); - fprintf(stderr, "\t\tSet the physical boot cpu\n"); - fprintf(stderr, "\t-f\n"); - fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n"); - fprintf(stderr, "\t-v\n"); - fprintf(stderr, "\t\tPrint DTC version and exit\n"); - exit(3); -} - -int main(int argc, char *argv[]) -{ - struct boot_info *bi; - const char *inform = "dts"; - const char *outform = "dts"; - const char *outname = "-"; - int force = 0, check = 0; - const char *arg; - int opt; - FILE *outf = NULL; - int outversion = DEFAULT_FDT_VERSION; - long long cmdline_boot_cpuid = -1; - - quiet = 0; - reservenum = 0; - minsize = 0; - padsize = 0; - - while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) { - switch (opt) { - case 'I': - inform = optarg; - break; - case 'O': - outform = optarg; - break; - case 'o': - outname = optarg; - break; - case 'V': - outversion = strtol(optarg, NULL, 0); - break; - case 'R': - reservenum = strtol(optarg, NULL, 0); - break; - case 'S': - minsize = strtol(optarg, NULL, 0); - break; - case 'p': - padsize = strtol(optarg, NULL, 0); - break; - case 'f': - force = 1; - break; - case 'c': - check = 1; - break; - case 'q': - quiet++; - break; - case 'b': - cmdline_boot_cpuid = strtoll(optarg, NULL, 0); - break; - case 'v': - printf("Version: %s\n", DTC_VERSION); - exit(0); - case 'h': - default: - usage(); - } - } - - if (argc > (optind+1)) - usage(); - else if (argc < (optind+1)) - arg = "-"; - else - arg = argv[optind]; - - /* minsize and padsize are mutually exclusive */ - if (minsize && padsize) - die("Can't set both -p and -S\n"); - - fprintf(stderr, "DTC: %s->%s on file \"%s\"\n", - inform, outform, arg); - - if (streq(inform, "dts")) - bi = dt_from_source(arg); - else if (streq(inform, "fs")) - bi = dt_from_fs(arg); - else if(streq(inform, "dtb")) - bi = dt_from_blob(arg); - else - die("Unknown input format \"%s\"\n", inform); - - if (cmdline_boot_cpuid != -1) - bi->boot_cpuid_phys = cmdline_boot_cpuid; - - fill_fullpaths(bi->dt, ""); - process_checks(force, bi); - - - if (streq(outname, "-")) { - outf = stdout; - } else { - outf = fopen(outname, "w"); - if (! outf) - die("Couldn't open output file %s: %s\n", - outname, strerror(errno)); - } - - if (streq(outform, "dts")) { - dt_to_source(outf, bi); - } else if (streq(outform, "dtb")) { - dt_to_blob(outf, bi, outversion); - } else if (streq(outform, "asm")) { - dt_to_asm(outf, bi, outversion); - } else if (streq(outform, "null")) { - /* do nothing */ - } else { - die("Unknown output format \"%s\"\n", outform); - } - - exit(0); -} diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/arch/powerpc/boot/dtc-src/dtc.h deleted file mode 100644 index 08d54c8..0000000 --- a/arch/powerpc/boot/dtc-src/dtc.h +++ /dev/null @@ -1,246 +0,0 @@ -#ifndef _DTC_H -#define _DTC_H - -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DEFAULT_FDT_VERSION 17 -/* - * Command line options - */ -extern int quiet; /* Level of quietness */ -extern int reservenum; /* Number of memory reservation slots */ -extern int minsize; /* Minimum blob size */ -extern int padsize; /* Additional padding to blob */ - -static inline void __attribute__((noreturn)) die(char * str, ...) -{ - va_list ap; - - va_start(ap, str); - fprintf(stderr, "FATAL ERROR: "); - vfprintf(stderr, str, ap); - exit(1); -} - -static inline void *xmalloc(size_t len) -{ - void *new = malloc(len); - - if (! new) - die("malloc() failed\n"); - - return new; -} - -static inline void *xrealloc(void *p, size_t len) -{ - void *new = realloc(p, len); - - if (! new) - die("realloc() failed (len=%d)\n", len); - - return new; -} - -typedef uint32_t cell_t; - - -#define streq(a, b) (strcmp((a), (b)) == 0) -#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0) - -#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) - -/* Data blobs */ -enum markertype { - REF_PHANDLE, - REF_PATH, - LABEL, -}; - -struct marker { - enum markertype type; - int offset; - char *ref; - struct marker *next; -}; - -struct data { - int len; - char *val; - struct marker *markers; -}; - - -#define empty_data ((struct data){ /* all .members = 0 or NULL */ }) - -#define for_each_marker(m) \ - for (; (m); (m) = (m)->next) -#define for_each_marker_of_type(m, t) \ - for_each_marker(m) \ - if ((m)->type == (t)) - -void data_free(struct data d); - -struct data data_grow_for(struct data d, int xlen); - -struct data data_copy_mem(const char *mem, int len); -struct data data_copy_escape_string(const char *s, int len); -struct data data_copy_file(FILE *f, size_t len); - -struct data data_append_data(struct data d, const void *p, int len); -struct data data_insert_at_marker(struct data d, struct marker *m, - const void *p, int len); -struct data data_merge(struct data d1, struct data d2); -struct data data_append_cell(struct data d, cell_t word); -struct data data_append_re(struct data d, const struct fdt_reserve_entry *re); -struct data data_append_addr(struct data d, uint64_t addr); -struct data data_append_byte(struct data d, uint8_t byte); -struct data data_append_zeroes(struct data d, int len); -struct data data_append_align(struct data d, int align); - -struct data data_add_marker(struct data d, enum markertype type, char *ref); - -int data_is_one_string(struct data d); - -/* DT constraints */ - -#define MAX_PROPNAME_LEN 31 -#define MAX_NODENAME_LEN 31 - -/* Live trees */ -struct property { - char *name; - struct data val; - - struct property *next; - - char *label; -}; - -struct node { - char *name; - struct property *proplist; - struct node *children; - - struct node *parent; - struct node *next_sibling; - - char *fullpath; - int basenamelen; - - cell_t phandle; - int addr_cells, size_cells; - - char *label; -}; - -#define for_each_property(n, p) \ - for ((p) = (n)->proplist; (p); (p) = (p)->next) - -#define for_each_child(n, c) \ - for ((c) = (n)->children; (c); (c) = (c)->next_sibling) - -struct property *build_property(char *name, struct data val, char *label); -struct property *chain_property(struct property *first, struct property *list); -struct property *reverse_properties(struct property *first); - -struct node *build_node(struct property *proplist, struct node *children); -struct node *name_node(struct node *node, char *name, char *label); -struct node *chain_node(struct node *first, struct node *list); - -void add_property(struct node *node, struct property *prop); -void add_child(struct node *parent, struct node *child); - -const char *get_unitname(struct node *node); -struct property *get_property(struct node *node, const char *propname); -cell_t propval_cell(struct property *prop); -struct node *get_subnode(struct node *node, const char *nodename); -struct node *get_node_by_path(struct node *tree, const char *path); -struct node *get_node_by_label(struct node *tree, const char *label); -struct node *get_node_by_phandle(struct node *tree, cell_t phandle); -struct node *get_node_by_ref(struct node *tree, const char *ref); -cell_t get_node_phandle(struct node *root, struct node *node); - -/* Boot info (tree plus memreserve information */ - -struct reserve_info { - struct fdt_reserve_entry re; - - struct reserve_info *next; - - char *label; -}; - -struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label); -struct reserve_info *chain_reserve_entry(struct reserve_info *first, - struct reserve_info *list); -struct reserve_info *add_reserve_entry(struct reserve_info *list, - struct reserve_info *new); - - -struct boot_info { - struct reserve_info *reservelist; - struct node *dt; /* the device tree */ - uint32_t boot_cpuid_phys; -}; - -struct boot_info *build_boot_info(struct reserve_info *reservelist, - struct node *tree, uint32_t boot_cpuid_phys); - -/* Checks */ - -void process_checks(int force, struct boot_info *bi); - -/* Flattened trees */ - -void dt_to_blob(FILE *f, struct boot_info *bi, int version); -void dt_to_asm(FILE *f, struct boot_info *bi, int version); - -struct boot_info *dt_from_blob(const char *fname); - -/* Tree source */ - -void dt_to_source(FILE *f, struct boot_info *bi); -struct boot_info *dt_from_source(const char *f); - -/* FS trees */ - -struct boot_info *dt_from_fs(const char *dirname); - -/* misc */ - -char *join_path(const char *path, const char *name); - -#endif /* _DTC_H */ diff --git a/arch/powerpc/boot/dtc-src/flattree.c b/arch/powerpc/boot/dtc-src/flattree.c deleted file mode 100644 index 76acd28..0000000 --- a/arch/powerpc/boot/dtc-src/flattree.c +++ /dev/null @@ -1,906 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -#define FTF_FULLPATH 0x1 -#define FTF_VARALIGN 0x2 -#define FTF_NAMEPROPS 0x4 -#define FTF_BOOTCPUID 0x8 -#define FTF_STRTABSIZE 0x10 -#define FTF_STRUCTSIZE 0x20 -#define FTF_NOPS 0x40 - -static struct version_info { - int version; - int last_comp_version; - int hdr_size; - int flags; -} version_table[] = { - {1, 1, FDT_V1_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS}, - {2, 1, FDT_V2_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID}, - {3, 1, FDT_V3_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE}, - {16, 16, FDT_V3_SIZE, - FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS}, - {17, 16, FDT_V17_SIZE, - FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS}, -}; - -struct emitter { - void (*cell)(void *, cell_t); - void (*string)(void *, char *, int); - void (*align)(void *, int); - void (*data)(void *, struct data); - void (*beginnode)(void *, const char *); - void (*endnode)(void *, const char *); - void (*property)(void *, const char *); -}; - -static void bin_emit_cell(void *e, cell_t val) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_cell(*dtbuf, val); -} - -static void bin_emit_string(void *e, char *str, int len) -{ - struct data *dtbuf = e; - - if (len == 0) - len = strlen(str); - - *dtbuf = data_append_data(*dtbuf, str, len); - *dtbuf = data_append_byte(*dtbuf, '\0'); -} - -static void bin_emit_align(void *e, int a) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_align(*dtbuf, a); -} - -static void bin_emit_data(void *e, struct data d) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_data(*dtbuf, d.val, d.len); -} - -static void bin_emit_beginnode(void *e, const char *label) -{ - bin_emit_cell(e, FDT_BEGIN_NODE); -} - -static void bin_emit_endnode(void *e, const char *label) -{ - bin_emit_cell(e, FDT_END_NODE); -} - -static void bin_emit_property(void *e, const char *label) -{ - bin_emit_cell(e, FDT_PROP); -} - -static struct emitter bin_emitter = { - .cell = bin_emit_cell, - .string = bin_emit_string, - .align = bin_emit_align, - .data = bin_emit_data, - .beginnode = bin_emit_beginnode, - .endnode = bin_emit_endnode, - .property = bin_emit_property, -}; - -static void emit_label(FILE *f, const char *prefix, const char *label) -{ - fprintf(f, "\t.globl\t%s_%s\n", prefix, label); - fprintf(f, "%s_%s:\n", prefix, label); - fprintf(f, "_%s_%s:\n", prefix, label); -} - -static void emit_offset_label(FILE *f, const char *label, int offset) -{ - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s\t= . + %d\n", label, offset); -} - -static void asm_emit_cell(void *e, cell_t val) -{ - FILE *f = e; - - fprintf(f, "\t.long\t0x%x\n", val); -} - -static void asm_emit_string(void *e, char *str, int len) -{ - FILE *f = e; - char c = 0; - - if (len != 0) { - /* XXX: ewww */ - c = str[len]; - str[len] = '\0'; - } - - fprintf(f, "\t.string\t\"%s\"\n", str); - - if (len != 0) { - str[len] = c; - } -} - -static void asm_emit_align(void *e, int a) -{ - FILE *f = e; - - fprintf(f, "\t.balign\t%d\n", a); -} - -static void asm_emit_data(void *e, struct data d) -{ - FILE *f = e; - int off = 0; - struct marker *m = d.markers; - - for_each_marker_of_type(m, LABEL) - emit_offset_label(f, m->ref, m->offset); - - while ((d.len - off) >= sizeof(uint32_t)) { - fprintf(f, "\t.long\t0x%x\n", - fdt32_to_cpu(*((uint32_t *)(d.val+off)))); - off += sizeof(uint32_t); - } - - while ((d.len - off) >= 1) { - fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]); - off += 1; - } - - assert(off == d.len); -} - -static void asm_emit_beginnode(void *e, const char *label) -{ - FILE *f = e; - - if (label) { - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s:\n", label); - } - fprintf(f, "\t.long\tFDT_BEGIN_NODE\n"); -} - -static void asm_emit_endnode(void *e, const char *label) -{ - FILE *f = e; - - fprintf(f, "\t.long\tFDT_END_NODE\n"); - if (label) { - fprintf(f, "\t.globl\t%s_end\n", label); - fprintf(f, "%s_end:\n", label); - } -} - -static void asm_emit_property(void *e, const char *label) -{ - FILE *f = e; - - if (label) { - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s:\n", label); - } - fprintf(f, "\t.long\tFDT_PROP\n"); -} - -static struct emitter asm_emitter = { - .cell = asm_emit_cell, - .string = asm_emit_string, - .align = asm_emit_align, - .data = asm_emit_data, - .beginnode = asm_emit_beginnode, - .endnode = asm_emit_endnode, - .property = asm_emit_property, -}; - -static int stringtable_insert(struct data *d, const char *str) -{ - int i; - - /* FIXME: do this more efficiently? */ - - for (i = 0; i < d->len; i++) { - if (streq(str, d->val + i)) - return i; - } - - *d = data_append_data(*d, str, strlen(str)+1); - return i; -} - -static void flatten_tree(struct node *tree, struct emitter *emit, - void *etarget, struct data *strbuf, - struct version_info *vi) -{ - struct property *prop; - struct node *child; - int seen_name_prop = 0; - - emit->beginnode(etarget, tree->label); - - if (vi->flags & FTF_FULLPATH) - emit->string(etarget, tree->fullpath, 0); - else - emit->string(etarget, tree->name, 0); - - emit->align(etarget, sizeof(cell_t)); - - for_each_property(tree, prop) { - int nameoff; - - if (streq(prop->name, "name")) - seen_name_prop = 1; - - nameoff = stringtable_insert(strbuf, prop->name); - - emit->property(etarget, prop->label); - emit->cell(etarget, prop->val.len); - emit->cell(etarget, nameoff); - - if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8)) - emit->align(etarget, 8); - - emit->data(etarget, prop->val); - emit->align(etarget, sizeof(cell_t)); - } - - if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) { - emit->property(etarget, NULL); - emit->cell(etarget, tree->basenamelen+1); - emit->cell(etarget, stringtable_insert(strbuf, "name")); - - if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8)) - emit->align(etarget, 8); - - emit->string(etarget, tree->name, tree->basenamelen); - emit->align(etarget, sizeof(cell_t)); - } - - for_each_child(tree, child) { - flatten_tree(child, emit, etarget, strbuf, vi); - } - - emit->endnode(etarget, tree->label); -} - -static struct data flatten_reserve_list(struct reserve_info *reservelist, - struct version_info *vi) -{ - struct reserve_info *re; - struct data d = empty_data; - static struct fdt_reserve_entry null_re = {0,0}; - int j; - - for (re = reservelist; re; re = re->next) { - d = data_append_re(d, &re->re); - } - /* - * Add additional reserved slots if the user asked for them. - */ - for (j = 0; j < reservenum; j++) { - d = data_append_re(d, &null_re); - } - - return d; -} - -static void make_fdt_header(struct fdt_header *fdt, - struct version_info *vi, - int reservesize, int dtsize, int strsize, - int boot_cpuid_phys) -{ - int reserve_off; - - reservesize += sizeof(struct fdt_reserve_entry); - - memset(fdt, 0xff, sizeof(*fdt)); - - fdt->magic = cpu_to_fdt32(FDT_MAGIC); - fdt->version = cpu_to_fdt32(vi->version); - fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version); - - /* Reserve map should be doubleword aligned */ - reserve_off = ALIGN(vi->hdr_size, 8); - - fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off); - fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize); - fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize - + dtsize); - fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize); - - if (vi->flags & FTF_BOOTCPUID) - fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys); - if (vi->flags & FTF_STRTABSIZE) - fdt->size_dt_strings = cpu_to_fdt32(strsize); - if (vi->flags & FTF_STRUCTSIZE) - fdt->size_dt_struct = cpu_to_fdt32(dtsize); -} - -void dt_to_blob(FILE *f, struct boot_info *bi, int version) -{ - struct version_info *vi = NULL; - int i; - struct data blob = empty_data; - struct data reservebuf = empty_data; - struct data dtbuf = empty_data; - struct data strbuf = empty_data; - struct fdt_header fdt; - int padlen = 0; - - for (i = 0; i < ARRAY_SIZE(version_table); i++) { - if (version_table[i].version == version) - vi = &version_table[i]; - } - if (!vi) - die("Unknown device tree blob version %d\n", version); - - flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi); - bin_emit_cell(&dtbuf, FDT_END); - - reservebuf = flatten_reserve_list(bi->reservelist, vi); - - /* Make header */ - make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len, - bi->boot_cpuid_phys); - - /* - * If the user asked for more space than is used, adjust the totalsize. - */ - if (minsize > 0) { - padlen = minsize - fdt32_to_cpu(fdt.totalsize); - if ((padlen < 0) && (quiet < 1)) - fprintf(stderr, - "Warning: blob size %d >= minimum size %d\n", - fdt32_to_cpu(fdt.totalsize), minsize); - } - - if (padsize > 0) - padlen = padsize; - - if (padlen > 0) { - int tsize = fdt32_to_cpu(fdt.totalsize); - tsize += padlen; - fdt.totalsize = cpu_to_fdt32(tsize); - } - - /* - * Assemble the blob: start with the header, add with alignment - * the reserve buffer, add the reserve map terminating zeroes, - * the device tree itself, and finally the strings. - */ - blob = data_append_data(blob, &fdt, vi->hdr_size); - blob = data_append_align(blob, 8); - blob = data_merge(blob, reservebuf); - blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry)); - blob = data_merge(blob, dtbuf); - blob = data_merge(blob, strbuf); - - /* - * If the user asked for more space than is used, pad out the blob. - */ - if (padlen > 0) - blob = data_append_zeroes(blob, padlen); - - fwrite(blob.val, blob.len, 1, f); - - if (ferror(f)) - die("Error writing device tree blob: %s\n", strerror(errno)); - - /* - * data_merge() frees the right-hand element so only the blob - * remains to be freed. - */ - data_free(blob); -} - -static void dump_stringtable_asm(FILE *f, struct data strbuf) -{ - const char *p; - int len; - - p = strbuf.val; - - while (p < (strbuf.val + strbuf.len)) { - len = strlen(p); - fprintf(f, "\t.string \"%s\"\n", p); - p += len+1; - } -} - -void dt_to_asm(FILE *f, struct boot_info *bi, int version) -{ - struct version_info *vi = NULL; - int i; - struct data strbuf = empty_data; - struct reserve_info *re; - const char *symprefix = "dt"; - - for (i = 0; i < ARRAY_SIZE(version_table); i++) { - if (version_table[i].version == version) - vi = &version_table[i]; - } - if (!vi) - die("Unknown device tree blob version %d\n", version); - - fprintf(f, "/* autogenerated by dtc, do not edit */\n\n"); - fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC); - fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE); - fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE); - fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP); - fprintf(f, "#define FDT_END 0x%x\n", FDT_END); - fprintf(f, "\n"); - - emit_label(f, symprefix, "blob_start"); - emit_label(f, symprefix, "header"); - fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n"); - fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version); - fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n", - vi->last_comp_version); - - if (vi->flags & FTF_BOOTCPUID) - fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n", - bi->boot_cpuid_phys); - - if (vi->flags & FTF_STRTABSIZE) - fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n", - symprefix, symprefix); - - if (vi->flags & FTF_STRUCTSIZE) - fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n", - symprefix, symprefix); - - /* - * Reserve map entries. - * Align the reserve map to a doubleword boundary. - * Each entry is an (address, size) pair of u64 values. - * Always supply a zero-sized temination entry. - */ - asm_emit_align(f, 8); - emit_label(f, symprefix, "reserve_map"); - - fprintf(f, "/* Memory reserve map from source file */\n"); - - /* - * Use .long on high and low halfs of u64s to avoid .quad - * as it appears .quad isn't available in some assemblers. - */ - for (re = bi->reservelist; re; re = re->next) { - if (re->label) { - fprintf(f, "\t.globl\t%s\n", re->label); - fprintf(f, "%s:\n", re->label); - } - fprintf(f, "\t.long\t0x%08x, 0x%08x\n", - (unsigned int)(re->re.address >> 32), - (unsigned int)(re->re.address & 0xffffffff)); - fprintf(f, "\t.long\t0x%08x, 0x%08x\n", - (unsigned int)(re->re.size >> 32), - (unsigned int)(re->re.size & 0xffffffff)); - } - for (i = 0; i < reservenum; i++) { - fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); - } - - fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); - - emit_label(f, symprefix, "struct_start"); - flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi); - fprintf(f, "\t.long\tFDT_END\n"); - emit_label(f, symprefix, "struct_end"); - - emit_label(f, symprefix, "strings_start"); - dump_stringtable_asm(f, strbuf); - emit_label(f, symprefix, "strings_end"); - - emit_label(f, symprefix, "blob_end"); - - /* - * If the user asked for more space than is used, pad it out. - */ - if (minsize > 0) { - fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n", - minsize, symprefix, symprefix); - } - if (padsize > 0) { - fprintf(f, "\t.space\t%d, 0\n", padsize); - } - emit_label(f, symprefix, "blob_abs_end"); - - data_free(strbuf); -} - -struct inbuf { - char *base, *limit, *ptr; -}; - -static void inbuf_init(struct inbuf *inb, void *base, void *limit) -{ - inb->base = base; - inb->limit = limit; - inb->ptr = inb->base; -} - -static void flat_read_chunk(struct inbuf *inb, void *p, int len) -{ - if ((inb->ptr + len) > inb->limit) - die("Premature end of data parsing flat device tree\n"); - - memcpy(p, inb->ptr, len); - - inb->ptr += len; -} - -static uint32_t flat_read_word(struct inbuf *inb) -{ - uint32_t val; - - assert(((inb->ptr - inb->base) % sizeof(val)) == 0); - - flat_read_chunk(inb, &val, sizeof(val)); - - return fdt32_to_cpu(val); -} - -static void flat_realign(struct inbuf *inb, int align) -{ - int off = inb->ptr - inb->base; - - inb->ptr = inb->base + ALIGN(off, align); - if (inb->ptr > inb->limit) - die("Premature end of data parsing flat device tree\n"); -} - -static char *flat_read_string(struct inbuf *inb) -{ - int len = 0; - const char *p = inb->ptr; - char *str; - - do { - if (p >= inb->limit) - die("Premature end of data parsing flat device tree\n"); - len++; - } while ((*p++) != '\0'); - - str = strdup(inb->ptr); - - inb->ptr += len; - - flat_realign(inb, sizeof(uint32_t)); - - return str; -} - -static struct data flat_read_data(struct inbuf *inb, int len) -{ - struct data d = empty_data; - - if (len == 0) - return empty_data; - - d = data_grow_for(d, len); - d.len = len; - - flat_read_chunk(inb, d.val, len); - - flat_realign(inb, sizeof(uint32_t)); - - return d; -} - -static char *flat_read_stringtable(struct inbuf *inb, int offset) -{ - const char *p; - - p = inb->base + offset; - while (1) { - if (p >= inb->limit || p < inb->base) - die("String offset %d overruns string table\n", - offset); - - if (*p == '\0') - break; - - p++; - } - - return strdup(inb->base + offset); -} - -static struct property *flat_read_property(struct inbuf *dtbuf, - struct inbuf *strbuf, int flags) -{ - uint32_t proplen, stroff; - char *name; - struct data val; - - proplen = flat_read_word(dtbuf); - stroff = flat_read_word(dtbuf); - - name = flat_read_stringtable(strbuf, stroff); - - if ((flags & FTF_VARALIGN) && (proplen >= 8)) - flat_realign(dtbuf, 8); - - val = flat_read_data(dtbuf, proplen); - - return build_property(name, val, NULL); -} - - -static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb) -{ - struct reserve_info *reservelist = NULL; - struct reserve_info *new; - const char *p; - struct fdt_reserve_entry re; - - /* - * Each entry is a pair of u64 (addr, size) values for 4 cell_t's. - * List terminates at an entry with size equal to zero. - * - * First pass, count entries. - */ - p = inb->ptr; - while (1) { - flat_read_chunk(inb, &re, sizeof(re)); - re.address = fdt64_to_cpu(re.address); - re.size = fdt64_to_cpu(re.size); - if (re.size == 0) - break; - - new = build_reserve_entry(re.address, re.size, NULL); - reservelist = add_reserve_entry(reservelist, new); - } - - return reservelist; -} - - -static char *nodename_from_path(const char *ppath, const char *cpath) -{ - int plen; - - plen = strlen(ppath); - - if (!strneq(ppath, cpath, plen)) - die("Path \"%s\" is not valid as a child of \"%s\"\n", - cpath, ppath); - - /* root node is a special case */ - if (!streq(ppath, "/")) - plen++; - - return strdup(cpath + plen); -} - -static struct node *unflatten_tree(struct inbuf *dtbuf, - struct inbuf *strbuf, - const char *parent_flatname, int flags) -{ - struct node *node; - char *flatname; - uint32_t val; - - node = build_node(NULL, NULL); - - flatname = flat_read_string(dtbuf); - - if (flags & FTF_FULLPATH) - node->name = nodename_from_path(parent_flatname, flatname); - else - node->name = flatname; - - do { - struct property *prop; - struct node *child; - - val = flat_read_word(dtbuf); - switch (val) { - case FDT_PROP: - if (node->children) - fprintf(stderr, "Warning: Flat tree input has " - "subnodes preceding a property.\n"); - prop = flat_read_property(dtbuf, strbuf, flags); - add_property(node, prop); - break; - - case FDT_BEGIN_NODE: - child = unflatten_tree(dtbuf,strbuf, flatname, flags); - add_child(node, child); - break; - - case FDT_END_NODE: - break; - - case FDT_END: - die("Premature FDT_END in device tree blob\n"); - break; - - case FDT_NOP: - if (!(flags & FTF_NOPS)) - fprintf(stderr, "Warning: NOP tag found in flat tree" - " version <16\n"); - - /* Ignore */ - break; - - default: - die("Invalid opcode word %08x in device tree blob\n", - val); - } - } while (val != FDT_END_NODE); - - return node; -} - - -struct boot_info *dt_from_blob(const char *fname) -{ - struct dtc_file *dtcf; - uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys; - uint32_t off_dt, off_str, off_mem_rsvmap; - int rc; - char *blob; - struct fdt_header *fdt; - char *p; - struct inbuf dtbuf, strbuf; - struct inbuf memresvbuf; - int sizeleft; - struct reserve_info *reservelist; - struct node *tree; - uint32_t val; - int flags = 0; - - dtcf = dtc_open_file(fname, NULL); - - rc = fread(&magic, sizeof(magic), 1, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob magic number: %s\n", - strerror(errno)); - if (rc < 1) { - if (feof(dtcf->file)) - die("EOF reading DT blob magic number\n"); - else - die("Mysterious short read reading magic number\n"); - } - - magic = fdt32_to_cpu(magic); - if (magic != FDT_MAGIC) - die("Blob has incorrect magic number\n"); - - rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob size: %s\n", strerror(errno)); - if (rc < 1) { - if (feof(dtcf->file)) - die("EOF reading DT blob size\n"); - else - die("Mysterious short read reading blob size\n"); - } - - totalsize = fdt32_to_cpu(totalsize); - if (totalsize < FDT_V1_SIZE) - die("DT blob size (%d) is too small\n", totalsize); - - blob = xmalloc(totalsize); - - fdt = (struct fdt_header *)blob; - fdt->magic = cpu_to_fdt32(magic); - fdt->totalsize = cpu_to_fdt32(totalsize); - - sizeleft = totalsize - sizeof(magic) - sizeof(totalsize); - p = blob + sizeof(magic) + sizeof(totalsize); - - while (sizeleft) { - if (feof(dtcf->file)) - die("EOF before reading %d bytes of DT blob\n", - totalsize); - - rc = fread(p, 1, sizeleft, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob: %s\n", - strerror(errno)); - - sizeleft -= rc; - p += rc; - } - - off_dt = fdt32_to_cpu(fdt->off_dt_struct); - off_str = fdt32_to_cpu(fdt->off_dt_strings); - off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap); - version = fdt32_to_cpu(fdt->version); - boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys); - - if (off_mem_rsvmap >= totalsize) - die("Mem Reserve structure offset exceeds total size\n"); - - if (off_dt >= totalsize) - die("DT structure offset exceeds total size\n"); - - if (off_str > totalsize) - die("String table offset exceeds total size\n"); - - if (version >= 3) { - uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings); - if (off_str+size_str > totalsize) - die("String table extends past total size\n"); - inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str); - } else { - inbuf_init(&strbuf, blob + off_str, blob + totalsize); - } - - if (version >= 17) { - size_dt = fdt32_to_cpu(fdt->size_dt_struct); - if (off_dt+size_dt > totalsize) - die("Structure block extends past total size\n"); - } - - if (version < 16) { - flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN; - } else { - flags |= FTF_NOPS; - } - - inbuf_init(&memresvbuf, - blob + off_mem_rsvmap, blob + totalsize); - inbuf_init(&dtbuf, blob + off_dt, blob + totalsize); - - reservelist = flat_read_mem_reserve(&memresvbuf); - - val = flat_read_word(&dtbuf); - - if (val != FDT_BEGIN_NODE) - die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val); - - tree = unflatten_tree(&dtbuf, &strbuf, "", flags); - - val = flat_read_word(&dtbuf); - if (val != FDT_END) - die("Device tree blob doesn't end with FDT_END\n"); - - free(blob); - - dtc_close_file(dtcf); - - return build_boot_info(reservelist, tree, boot_cpuid_phys); -} diff --git a/arch/powerpc/boot/dtc-src/fstree.c b/arch/powerpc/boot/dtc-src/fstree.c deleted file mode 100644 index 766b269..0000000 --- a/arch/powerpc/boot/dtc-src/fstree.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -#include -#include - -static struct node *read_fstree(const char *dirname) -{ - DIR *d; - struct dirent *de; - struct stat st; - struct node *tree; - - d = opendir(dirname); - if (!d) - die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno)); - - tree = build_node(NULL, NULL); - - while ((de = readdir(d)) != NULL) { - char *tmpnam; - - if (streq(de->d_name, ".") - || streq(de->d_name, "..")) - continue; - - tmpnam = join_path(dirname, de->d_name); - - if (lstat(tmpnam, &st) < 0) - die("stat(%s): %s\n", tmpnam, strerror(errno)); - - if (S_ISREG(st.st_mode)) { - struct property *prop; - FILE *pfile; - - pfile = fopen(tmpnam, "r"); - if (! pfile) { - fprintf(stderr, - "WARNING: Cannot open %s: %s\n", - tmpnam, strerror(errno)); - } else { - prop = build_property(strdup(de->d_name), - data_copy_file(pfile, - st.st_size), - NULL); - add_property(tree, prop); - fclose(pfile); - } - } else if (S_ISDIR(st.st_mode)) { - struct node *newchild; - - newchild = read_fstree(tmpnam); - newchild = name_node(newchild, strdup(de->d_name), - NULL); - add_child(tree, newchild); - } - - free(tmpnam); - } - - return tree; -} - -struct boot_info *dt_from_fs(const char *dirname) -{ - struct node *tree; - - tree = read_fstree(dirname); - tree = name_node(tree, "", NULL); - - return build_boot_info(NULL, tree, 0); -} - diff --git a/arch/powerpc/boot/dtc-src/libfdt_env.h b/arch/powerpc/boot/dtc-src/libfdt_env.h deleted file mode 100644 index 449bf60..0000000 --- a/arch/powerpc/boot/dtc-src/libfdt_env.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _LIBFDT_ENV_H -#define _LIBFDT_ENV_H - -#include -#include -#include - -#define _B(n) ((unsigned long long)((uint8_t *)&x)[n]) -static inline uint32_t fdt32_to_cpu(uint32_t x) -{ - return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3); -} -#define cpu_to_fdt32(x) fdt32_to_cpu(x) - -static inline uint64_t fdt64_to_cpu(uint64_t x) -{ - return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32) - | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7); -} -#define cpu_to_fdt64(x) fdt64_to_cpu(x) -#undef _B - -#endif /* _LIBFDT_ENV_H */ diff --git a/arch/powerpc/boot/dtc-src/livetree.c b/arch/powerpc/boot/dtc-src/livetree.c deleted file mode 100644 index 0ca3de5..0000000 --- a/arch/powerpc/boot/dtc-src/livetree.c +++ /dev/null @@ -1,308 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -/* - * Tree building functions - */ - -struct property *build_property(char *name, struct data val, char *label) -{ - struct property *new = xmalloc(sizeof(*new)); - - new->name = name; - new->val = val; - - new->next = NULL; - - new->label = label; - - return new; -} - -struct property *chain_property(struct property *first, struct property *list) -{ - assert(first->next == NULL); - - first->next = list; - return first; -} - -struct property *reverse_properties(struct property *first) -{ - struct property *p = first; - struct property *head = NULL; - struct property *next; - - while (p) { - next = p->next; - p->next = head; - head = p; - p = next; - } - return head; -} - -struct node *build_node(struct property *proplist, struct node *children) -{ - struct node *new = xmalloc(sizeof(*new)); - struct node *child; - - memset(new, 0, sizeof(*new)); - - new->proplist = reverse_properties(proplist); - new->children = children; - - for_each_child(new, child) { - child->parent = new; - } - - return new; -} - -struct node *name_node(struct node *node, char *name, char * label) -{ - assert(node->name == NULL); - - node->name = name; - - node->label = label; - - return node; -} - -struct node *chain_node(struct node *first, struct node *list) -{ - assert(first->next_sibling == NULL); - - first->next_sibling = list; - return first; -} - -void add_property(struct node *node, struct property *prop) -{ - struct property **p; - - prop->next = NULL; - - p = &node->proplist; - while (*p) - p = &((*p)->next); - - *p = prop; -} - -void add_child(struct node *parent, struct node *child) -{ - struct node **p; - - child->next_sibling = NULL; - child->parent = parent; - - p = &parent->children; - while (*p) - p = &((*p)->next_sibling); - - *p = child; -} - -struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size, - char *label) -{ - struct reserve_info *new = xmalloc(sizeof(*new)); - - new->re.address = address; - new->re.size = size; - - new->next = NULL; - - new->label = label; - - return new; -} - -struct reserve_info *chain_reserve_entry(struct reserve_info *first, - struct reserve_info *list) -{ - assert(first->next == NULL); - - first->next = list; - return first; -} - -struct reserve_info *add_reserve_entry(struct reserve_info *list, - struct reserve_info *new) -{ - struct reserve_info *last; - - new->next = NULL; - - if (! list) - return new; - - for (last = list; last->next; last = last->next) - ; - - last->next = new; - - return list; -} - -struct boot_info *build_boot_info(struct reserve_info *reservelist, - struct node *tree, uint32_t boot_cpuid_phys) -{ - struct boot_info *bi; - - bi = xmalloc(sizeof(*bi)); - bi->reservelist = reservelist; - bi->dt = tree; - bi->boot_cpuid_phys = boot_cpuid_phys; - - return bi; -} - -/* - * Tree accessor functions - */ - -const char *get_unitname(struct node *node) -{ - if (node->name[node->basenamelen] == '\0') - return ""; - else - return node->name + node->basenamelen + 1; -} - -struct property *get_property(struct node *node, const char *propname) -{ - struct property *prop; - - for_each_property(node, prop) - if (streq(prop->name, propname)) - return prop; - - return NULL; -} - -cell_t propval_cell(struct property *prop) -{ - assert(prop->val.len == sizeof(cell_t)); - return fdt32_to_cpu(*((cell_t *)prop->val.val)); -} - -struct node *get_subnode(struct node *node, const char *nodename) -{ - struct node *child; - - for_each_child(node, child) - if (streq(child->name, nodename)) - return child; - - return NULL; -} - -struct node *get_node_by_path(struct node *tree, const char *path) -{ - const char *p; - struct node *child; - - if (!path || ! (*path)) - return tree; - - while (path[0] == '/') - path++; - - p = strchr(path, '/'); - - for_each_child(tree, child) { - if (p && strneq(path, child->name, p-path)) - return get_node_by_path(child, p+1); - else if (!p && streq(path, child->name)) - return child; - } - - return NULL; -} - -struct node *get_node_by_label(struct node *tree, const char *label) -{ - struct node *child, *node; - - assert(label && (strlen(label) > 0)); - - if (tree->label && streq(tree->label, label)) - return tree; - - for_each_child(tree, child) { - node = get_node_by_label(child, label); - if (node) - return node; - } - - return NULL; -} - -struct node *get_node_by_phandle(struct node *tree, cell_t phandle) -{ - struct node *child, *node; - - assert((phandle != 0) && (phandle != -1)); - - if (tree->phandle == phandle) - return tree; - - for_each_child(tree, child) { - node = get_node_by_phandle(child, phandle); - if (node) - return node; - } - - return NULL; -} - -struct node *get_node_by_ref(struct node *tree, const char *ref) -{ - if (ref[0] == '/') - return get_node_by_path(tree, ref); - else - return get_node_by_label(tree, ref); -} - -cell_t get_node_phandle(struct node *root, struct node *node) -{ - static cell_t phandle = 1; /* FIXME: ick, static local */ - - if ((node->phandle != 0) && (node->phandle != -1)) - return node->phandle; - - assert(! get_property(node, "linux,phandle")); - - while (get_node_by_phandle(root, phandle)) - phandle++; - - node->phandle = phandle; - add_property(node, - build_property("linux,phandle", - data_append_cell(empty_data, phandle), - NULL)); - - return node->phandle; -} diff --git a/arch/powerpc/boot/dtc-src/srcpos.c b/arch/powerpc/boot/dtc-src/srcpos.c deleted file mode 100644 index 9641b76..0000000 --- a/arch/powerpc/boot/dtc-src/srcpos.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -/* - * Like yylineno, this is the current open file pos. - */ - -struct dtc_file *srcpos_file; - -static int dtc_open_one(struct dtc_file *file, - const char *search, - const char *fname) -{ - char *fullname; - - if (search) { - fullname = xmalloc(strlen(search) + strlen(fname) + 2); - - strcpy(fullname, search); - strcat(fullname, "/"); - strcat(fullname, fname); - } else { - fullname = strdup(fname); - } - - file->file = fopen(fullname, "r"); - if (!file->file) { - free(fullname); - return 0; - } - - file->name = fullname; - return 1; -} - - -struct dtc_file *dtc_open_file(const char *fname, - const struct search_path *search) -{ - static const struct search_path default_search = { NULL, NULL, NULL }; - - struct dtc_file *file; - const char *slash; - - file = xmalloc(sizeof(struct dtc_file)); - - slash = strrchr(fname, '/'); - if (slash) { - char *dir = xmalloc(slash - fname + 1); - - memcpy(dir, fname, slash - fname); - dir[slash - fname] = 0; - file->dir = dir; - } else { - file->dir = NULL; - } - - if (streq(fname, "-")) { - file->name = "stdin"; - file->file = stdin; - return file; - } - - if (fname[0] == '/') { - file->file = fopen(fname, "r"); - if (!file->file) - goto fail; - - file->name = strdup(fname); - return file; - } - - if (!search) - search = &default_search; - - while (search) { - if (dtc_open_one(file, search->dir, fname)) - return file; - - if (errno != ENOENT) - goto fail; - - search = search->next; - } - -fail: - die("Couldn't open \"%s\": %s\n", fname, strerror(errno)); -} - -void dtc_close_file(struct dtc_file *file) -{ - if (fclose(file->file)) - die("Error closing \"%s\": %s\n", file->name, strerror(errno)); - - free(file->dir); - free(file); -} diff --git a/arch/powerpc/boot/dtc-src/srcpos.h b/arch/powerpc/boot/dtc-src/srcpos.h deleted file mode 100644 index e17c7c0..0000000 --- a/arch/powerpc/boot/dtc-src/srcpos.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -/* - * Augment the standard YYLTYPE with a filenum index into an - * array of all opened filenames. - */ - -#include - -struct dtc_file { - char *dir; - const char *name; - FILE *file; -}; - -#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED) -typedef struct YYLTYPE { - int first_line; - int first_column; - int last_line; - int last_column; - struct dtc_file *file; -} YYLTYPE; - -#define YYLTYPE_IS_DECLARED 1 -#define YYLTYPE_IS_TRIVIAL 1 -#endif - -/* Cater to old parser templates. */ -#ifndef YYID -#define YYID(n) (n) -#endif - -#define YYLLOC_DEFAULT(Current, Rhs, N) \ - do \ - if (YYID (N)) \ - { \ - (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ - (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ - (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ - (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ - (Current).file = YYRHSLOC (Rhs, N).file; \ - } \ - else \ - { \ - (Current).first_line = (Current).last_line = \ - YYRHSLOC (Rhs, 0).last_line; \ - (Current).first_column = (Current).last_column = \ - YYRHSLOC (Rhs, 0).last_column; \ - (Current).file = YYRHSLOC (Rhs, 0).file; \ - } \ - while (YYID (0)) - - - -extern void yyerror(char const *); -extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2))); - -extern struct dtc_file *srcpos_file; - -struct search_path { - const char *dir; /* NULL for current directory */ - struct search_path *prev, *next; -}; - -extern struct dtc_file *dtc_open_file(const char *fname, - const struct search_path *search); -extern void dtc_close_file(struct dtc_file *file); diff --git a/arch/powerpc/boot/dtc-src/treesource.c b/arch/powerpc/boot/dtc-src/treesource.c deleted file mode 100644 index ebeb6eb..0000000 --- a/arch/powerpc/boot/dtc-src/treesource.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -extern FILE *yyin; -extern int yyparse(void); - -struct boot_info *the_boot_info; -int treesource_error; - -struct boot_info *dt_from_source(const char *fname) -{ - the_boot_info = NULL; - treesource_error = 0; - - srcpos_file = dtc_open_file(fname, NULL); - yyin = srcpos_file->file; - - if (yyparse() != 0) - die("Unable to parse input tree\n"); - - if (treesource_error) - die("Syntax error parsing input tree\n"); - - return the_boot_info; -} - -static void write_prefix(FILE *f, int level) -{ - int i; - - for (i = 0; i < level; i++) - fputc('\t', f); -} - -int isstring(char c) -{ - return (isprint(c) - || (c == '\0') - || strchr("\a\b\t\n\v\f\r", c)); -} - -static void write_propval_string(FILE *f, struct data val) -{ - const char *str = val.val; - int i; - int newchunk = 1; - struct marker *m = val.markers; - - assert(str[val.len-1] == '\0'); - - for (i = 0; i < (val.len-1); i++) { - char c = str[i]; - - if (newchunk) { - while (m && (m->offset <= i)) { - if (m->type == LABEL) { - assert(m->offset == i); - fprintf(f, "%s: ", m->ref); - } - m = m->next; - } - fprintf(f, "\""); - newchunk = 0; - } - - switch (c) { - case '\a': - fprintf(f, "\\a"); - break; - case '\b': - fprintf(f, "\\b"); - break; - case '\t': - fprintf(f, "\\t"); - break; - case '\n': - fprintf(f, "\\n"); - break; - case '\v': - fprintf(f, "\\v"); - break; - case '\f': - fprintf(f, "\\f"); - break; - case '\r': - fprintf(f, "\\r"); - break; - case '\\': - fprintf(f, "\\\\"); - break; - case '\"': - fprintf(f, "\\\""); - break; - case '\0': - fprintf(f, "\", "); - newchunk = 1; - break; - default: - if (isprint(c)) - fprintf(f, "%c", c); - else - fprintf(f, "\\x%02hhx", c); - } - } - fprintf(f, "\""); - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } -} - -static void write_propval_cells(FILE *f, struct data val) -{ - void *propend = val.val + val.len; - cell_t *cp = (cell_t *)val.val; - struct marker *m = val.markers; - - fprintf(f, "<"); - for (;;) { - while (m && (m->offset <= ((char *)cp - val.val))) { - if (m->type == LABEL) { - assert(m->offset == ((char *)cp - val.val)); - fprintf(f, "%s: ", m->ref); - } - m = m->next; - } - - fprintf(f, "0x%x", fdt32_to_cpu(*cp++)); - if ((void *)cp >= propend) - break; - fprintf(f, " "); - } - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } - fprintf(f, ">"); -} - -static void write_propval_bytes(FILE *f, struct data val) -{ - void *propend = val.val + val.len; - const char *bp = val.val; - struct marker *m = val.markers; - - fprintf(f, "["); - for (;;) { - while (m && (m->offset == (bp-val.val))) { - if (m->type == LABEL) - fprintf(f, "%s: ", m->ref); - m = m->next; - } - - fprintf(f, "%02hhx", *bp++); - if ((const void *)bp >= propend) - break; - fprintf(f, " "); - } - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } - fprintf(f, "]"); -} - -static void write_propval(FILE *f, struct property *prop) -{ - int len = prop->val.len; - const char *p = prop->val.val; - struct marker *m = prop->val.markers; - int nnotstring = 0, nnul = 0; - int nnotstringlbl = 0, nnotcelllbl = 0; - int i; - - if (len == 0) { - fprintf(f, ";\n"); - return; - } - - for (i = 0; i < len; i++) { - if (! isstring(p[i])) - nnotstring++; - if (p[i] == '\0') - nnul++; - } - - for_each_marker_of_type(m, LABEL) { - if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0')) - nnotstringlbl++; - if ((m->offset % sizeof(cell_t)) != 0) - nnotcelllbl++; - } - - fprintf(f, " = "); - if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul)) - && (nnotstringlbl == 0)) { - write_propval_string(f, prop->val); - } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) { - write_propval_cells(f, prop->val); - } else { - write_propval_bytes(f, prop->val); - } - - fprintf(f, ";\n"); -} - -static void write_tree_source_node(FILE *f, struct node *tree, int level) -{ - struct property *prop; - struct node *child; - - write_prefix(f, level); - if (tree->label) - fprintf(f, "%s: ", tree->label); - if (tree->name && (*tree->name)) - fprintf(f, "%s {\n", tree->name); - else - fprintf(f, "/ {\n"); - - for_each_property(tree, prop) { - write_prefix(f, level+1); - if (prop->label) - fprintf(f, "%s: ", prop->label); - fprintf(f, "%s", prop->name); - write_propval(f, prop); - } - for_each_child(tree, child) { - fprintf(f, "\n"); - write_tree_source_node(f, child, level+1); - } - write_prefix(f, level); - fprintf(f, "};\n"); -} - - -void dt_to_source(FILE *f, struct boot_info *bi) -{ - struct reserve_info *re; - - fprintf(f, "/dts-v1/;\n\n"); - - for (re = bi->reservelist; re; re = re->next) { - if (re->label) - fprintf(f, "%s: ", re->label); - fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n", - (unsigned long long)re->re.address, - (unsigned long long)re->re.size); - } - - write_tree_source_node(f, bi->dt, 0); -} - diff --git a/arch/powerpc/boot/dtc-src/version_gen.h b/arch/powerpc/boot/dtc-src/version_gen.h deleted file mode 100644 index 658ff42..0000000 --- a/arch/powerpc/boot/dtc-src/version_gen.h +++ /dev/null @@ -1 +0,0 @@ -#define DTC_VERSION "DTC 1.2.0" diff --git a/arch/powerpc/boot/libfdt/Makefile.libfdt b/arch/powerpc/boot/libfdt/Makefile.libfdt deleted file mode 100644 index 6c42acf..0000000 --- a/arch/powerpc/boot/libfdt/Makefile.libfdt +++ /dev/null @@ -1,8 +0,0 @@ -# Makefile.libfdt -# -# This is not a complete Makefile of itself. Instead, it is designed to -# be easily embeddable into other systems of Makefiles. -# -LIBFDT_INCLUDES = fdt.h libfdt.h -LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c -LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o) diff --git a/arch/powerpc/boot/libfdt/fdt.c b/arch/powerpc/boot/libfdt/fdt.c deleted file mode 100644 index 2acaec5..0000000 --- a/arch/powerpc/boot/libfdt/fdt.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -int fdt_check_header(const void *fdt) -{ - if (fdt_magic(fdt) == FDT_MAGIC) { - /* Complete tree */ - if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) - return -FDT_ERR_BADVERSION; - if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) - return -FDT_ERR_BADVERSION; - } else if (fdt_magic(fdt) == FDT_SW_MAGIC) { - /* Unfinished sequential-write blob */ - if (fdt_size_dt_struct(fdt) == 0) - return -FDT_ERR_BADSTATE; - } else { - return -FDT_ERR_BADMAGIC; - } - - return 0; -} - -const void *fdt_offset_ptr(const void *fdt, int offset, int len) -{ - const char *p; - - if (fdt_version(fdt) >= 0x11) - if (((offset + len) < offset) - || ((offset + len) > fdt_size_dt_struct(fdt))) - return NULL; - - p = _fdt_offset_ptr(fdt, offset); - - if (p + len < p) - return NULL; - return p; -} - -uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset) -{ - const uint32_t *tagp, *lenp; - uint32_t tag; - const char *p; - - if (offset % FDT_TAGSIZE) - return -1; - - tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); - if (! tagp) - return FDT_END; /* premature end */ - tag = fdt32_to_cpu(*tagp); - offset += FDT_TAGSIZE; - - switch (tag) { - case FDT_BEGIN_NODE: - /* skip name */ - do { - p = fdt_offset_ptr(fdt, offset++, 1); - } while (p && (*p != '\0')); - if (! p) - return FDT_END; - break; - case FDT_PROP: - lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); - if (! lenp) - return FDT_END; - /* skip name offset, length and value */ - offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp); - break; - } - - if (nextoffset) - *nextoffset = FDT_TAGALIGN(offset); - - return tag; -} - -int _fdt_check_node_offset(const void *fdt, int offset) -{ - if ((offset < 0) || (offset % FDT_TAGSIZE) - || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE)) - return -FDT_ERR_BADOFFSET; - - return offset; -} - -int fdt_next_node(const void *fdt, int offset, int *depth) -{ - int nextoffset = 0; - uint32_t tag; - - if (offset >= 0) - if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0) - return nextoffset; - - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - - switch (tag) { - case FDT_PROP: - case FDT_NOP: - break; - - case FDT_BEGIN_NODE: - if (depth) - (*depth)++; - break; - - case FDT_END_NODE: - if (depth) - (*depth)--; - break; - - case FDT_END: - return -FDT_ERR_NOTFOUND; - - default: - return -FDT_ERR_BADSTRUCTURE; - } - } while (tag != FDT_BEGIN_NODE); - - return offset; -} - -const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) -{ - int len = strlen(s) + 1; - const char *last = strtab + tabsize - len; - const char *p; - - for (p = strtab; p <= last; p++) - if (memcmp(p, s, len) == 0) - return p; - return NULL; -} - -int fdt_move(const void *fdt, void *buf, int bufsize) -{ - FDT_CHECK_HEADER(fdt); - - if (fdt_totalsize(fdt) > bufsize) - return -FDT_ERR_NOSPACE; - - memmove(buf, fdt, fdt_totalsize(fdt)); - return 0; -} diff --git a/arch/powerpc/boot/libfdt/fdt.h b/arch/powerpc/boot/libfdt/fdt.h deleted file mode 100644 index 48ccfd9..0000000 --- a/arch/powerpc/boot/libfdt/fdt.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _FDT_H -#define _FDT_H - -#ifndef __ASSEMBLY__ - -struct fdt_header { - uint32_t magic; /* magic word FDT_MAGIC */ - uint32_t totalsize; /* total size of DT block */ - uint32_t off_dt_struct; /* offset to structure */ - uint32_t off_dt_strings; /* offset to strings */ - uint32_t off_mem_rsvmap; /* offset to memory reserve map */ - uint32_t version; /* format version */ - uint32_t last_comp_version; /* last compatible version */ - - /* version 2 fields below */ - uint32_t boot_cpuid_phys; /* Which physical CPU id we're - booting on */ - /* version 3 fields below */ - uint32_t size_dt_strings; /* size of the strings block */ - - /* version 17 fields below */ - uint32_t size_dt_struct; /* size of the structure block */ -}; - -struct fdt_reserve_entry { - uint64_t address; - uint64_t size; -}; - -struct fdt_node_header { - uint32_t tag; - char name[0]; -}; - -struct fdt_property { - uint32_t tag; - uint32_t len; - uint32_t nameoff; - char data[0]; -}; - -#endif /* !__ASSEMBLY */ - -#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ -#define FDT_TAGSIZE sizeof(uint32_t) - -#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ -#define FDT_END_NODE 0x2 /* End node */ -#define FDT_PROP 0x3 /* Property: name off, - size, content */ -#define FDT_NOP 0x4 /* nop */ -#define FDT_END 0x9 - -#define FDT_V1_SIZE (7*sizeof(uint32_t)) -#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) -#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) -#define FDT_V16_SIZE FDT_V3_SIZE -#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) - -#endif /* _FDT_H */ diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/arch/powerpc/boot/libfdt/fdt_ro.c deleted file mode 100644 index fbbba44..0000000 --- a/arch/powerpc/boot/libfdt/fdt_ro.c +++ /dev/null @@ -1,469 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_nodename_eq(const void *fdt, int offset, - const char *s, int len) -{ - const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1); - - if (! p) - /* short match */ - return 0; - - if (memcmp(p, s, len) != 0) - return 0; - - if (p[len] == '\0') - return 1; - else if (!memchr(s, '@', len) && (p[len] == '@')) - return 1; - else - return 0; -} - -const char *fdt_string(const void *fdt, int stroffset) -{ - return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset; -} - -int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size) -{ - FDT_CHECK_HEADER(fdt); - *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address); - *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size); - return 0; -} - -int fdt_num_mem_rsv(const void *fdt) -{ - int i = 0; - - while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0) - i++; - return i; -} - -int fdt_subnode_offset_namelen(const void *fdt, int offset, - const char *name, int namelen) -{ - int depth; - - FDT_CHECK_HEADER(fdt); - - for (depth = 0, offset = fdt_next_node(fdt, offset, &depth); - (offset >= 0) && (depth > 0); - offset = fdt_next_node(fdt, offset, &depth)) { - if (depth < 0) - return -FDT_ERR_NOTFOUND; - else if ((depth == 1) - && _fdt_nodename_eq(fdt, offset, name, namelen)) - return offset; - } - - if (offset < 0) - return offset; /* error */ - else - return -FDT_ERR_NOTFOUND; -} - -int fdt_subnode_offset(const void *fdt, int parentoffset, - const char *name) -{ - return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); -} - -int fdt_path_offset(const void *fdt, const char *path) -{ - const char *end = path + strlen(path); - const char *p = path; - int offset = 0; - - FDT_CHECK_HEADER(fdt); - - if (*path != '/') - return -FDT_ERR_BADPATH; - - while (*p) { - const char *q; - - while (*p == '/') - p++; - if (! *p) - return offset; - q = strchr(p, '/'); - if (! q) - q = end; - - offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); - if (offset < 0) - return offset; - - p = q; - } - - return offset; -} - -const char *fdt_get_name(const void *fdt, int nodeoffset, int *len) -{ - const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset); - int err; - - if (((err = fdt_check_header(fdt)) != 0) - || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) - goto fail; - - if (len) - *len = strlen(nh->name); - - return nh->name; - - fail: - if (len) - *len = err; - return NULL; -} - -const struct fdt_property *fdt_get_property(const void *fdt, - int nodeoffset, - const char *name, int *lenp) -{ - uint32_t tag; - const struct fdt_property *prop; - int namestroff; - int offset, nextoffset; - int err; - - if (((err = fdt_check_header(fdt)) != 0) - || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) - goto fail; - - nextoffset = err; - do { - offset = nextoffset; - - tag = fdt_next_tag(fdt, offset, &nextoffset); - switch (tag) { - case FDT_END: - err = -FDT_ERR_TRUNCATED; - goto fail; - - case FDT_BEGIN_NODE: - case FDT_END_NODE: - case FDT_NOP: - break; - - case FDT_PROP: - err = -FDT_ERR_BADSTRUCTURE; - prop = fdt_offset_ptr(fdt, offset, sizeof(*prop)); - if (! prop) - goto fail; - namestroff = fdt32_to_cpu(prop->nameoff); - if (strcmp(fdt_string(fdt, namestroff), name) == 0) { - /* Found it! */ - int len = fdt32_to_cpu(prop->len); - prop = fdt_offset_ptr(fdt, offset, - sizeof(*prop)+len); - if (! prop) - goto fail; - - if (lenp) - *lenp = len; - - return prop; - } - break; - - default: - err = -FDT_ERR_BADSTRUCTURE; - goto fail; - } - } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE)); - - err = -FDT_ERR_NOTFOUND; - fail: - if (lenp) - *lenp = err; - return NULL; -} - -const void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp) -{ - const struct fdt_property *prop; - - prop = fdt_get_property(fdt, nodeoffset, name, lenp); - if (! prop) - return NULL; - - return prop->data; -} - -uint32_t fdt_get_phandle(const void *fdt, int nodeoffset) -{ - const uint32_t *php; - int len; - - php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len); - if (!php || (len != sizeof(*php))) - return 0; - - return fdt32_to_cpu(*php); -} - -int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen) -{ - int pdepth = 0, p = 0; - int offset, depth, namelen; - const char *name; - - FDT_CHECK_HEADER(fdt); - - if (buflen < 2) - return -FDT_ERR_NOSPACE; - - for (offset = 0, depth = 0; - (offset >= 0) && (offset <= nodeoffset); - offset = fdt_next_node(fdt, offset, &depth)) { - if (pdepth < depth) - continue; /* overflowed buffer */ - - while (pdepth > depth) { - do { - p--; - } while (buf[p-1] != '/'); - pdepth--; - } - - name = fdt_get_name(fdt, offset, &namelen); - if (!name) - return namelen; - if ((p + namelen + 1) <= buflen) { - memcpy(buf + p, name, namelen); - p += namelen; - buf[p++] = '/'; - pdepth++; - } - - if (offset == nodeoffset) { - if (pdepth < (depth + 1)) - return -FDT_ERR_NOSPACE; - - if (p > 1) /* special case so that root path is "/", not "" */ - p--; - buf[p] = '\0'; - return p; - } - } - - if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) - return -FDT_ERR_BADOFFSET; - else if (offset == -FDT_ERR_BADOFFSET) - return -FDT_ERR_BADSTRUCTURE; - - return offset; /* error from fdt_next_node() */ -} - -int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, - int supernodedepth, int *nodedepth) -{ - int offset, depth; - int supernodeoffset = -FDT_ERR_INTERNAL; - - FDT_CHECK_HEADER(fdt); - - if (supernodedepth < 0) - return -FDT_ERR_NOTFOUND; - - for (offset = 0, depth = 0; - (offset >= 0) && (offset <= nodeoffset); - offset = fdt_next_node(fdt, offset, &depth)) { - if (depth == supernodedepth) - supernodeoffset = offset; - - if (offset == nodeoffset) { - if (nodedepth) - *nodedepth = depth; - - if (supernodedepth > depth) - return -FDT_ERR_NOTFOUND; - else - return supernodeoffset; - } - } - - if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) - return -FDT_ERR_BADOFFSET; - else if (offset == -FDT_ERR_BADOFFSET) - return -FDT_ERR_BADSTRUCTURE; - - return offset; /* error from fdt_next_node() */ -} - -int fdt_node_depth(const void *fdt, int nodeoffset) -{ - int nodedepth; - int err; - - err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth); - if (err) - return (err < 0) ? err : -FDT_ERR_INTERNAL; - return nodedepth; -} - -int fdt_parent_offset(const void *fdt, int nodeoffset) -{ - int nodedepth = fdt_node_depth(fdt, nodeoffset); - - if (nodedepth < 0) - return nodedepth; - return fdt_supernode_atdepth_offset(fdt, nodeoffset, - nodedepth - 1, NULL); -} - -int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, - const char *propname, - const void *propval, int proplen) -{ - int offset; - const void *val; - int len; - - FDT_CHECK_HEADER(fdt); - - /* FIXME: The algorithm here is pretty horrible: we scan each - * property of a node in fdt_getprop(), then if that didn't - * find what we want, we scan over them again making our way - * to the next node. Still it's the easiest to implement - * approach; performance can come later. */ - for (offset = fdt_next_node(fdt, startoffset, NULL); - offset >= 0; - offset = fdt_next_node(fdt, offset, NULL)) { - val = fdt_getprop(fdt, offset, propname, &len); - if (val && (len == proplen) - && (memcmp(val, propval, len) == 0)) - return offset; - } - - return offset; /* error from fdt_next_node() */ -} - -int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) -{ - if ((phandle == 0) || (phandle == -1)) - return -FDT_ERR_BADPHANDLE; - phandle = cpu_to_fdt32(phandle); - return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle", - &phandle, sizeof(phandle)); -} - -int _stringlist_contains(const char *strlist, int listlen, const char *str) -{ - int len = strlen(str); - const char *p; - - while (listlen >= len) { - if (memcmp(str, strlist, len+1) == 0) - return 1; - p = memchr(strlist, '\0', listlen); - if (!p) - return 0; /* malformed strlist.. */ - listlen -= (p-strlist) + 1; - strlist = p + 1; - } - return 0; -} - -int fdt_node_check_compatible(const void *fdt, int nodeoffset, - const char *compatible) -{ - const void *prop; - int len; - - prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); - if (!prop) - return len; - if (_stringlist_contains(prop, len, compatible)) - return 0; - else - return 1; -} - -int fdt_node_offset_by_compatible(const void *fdt, int startoffset, - const char *compatible) -{ - int offset, err; - - FDT_CHECK_HEADER(fdt); - - /* FIXME: The algorithm here is pretty horrible: we scan each - * property of a node in fdt_node_check_compatible(), then if - * that didn't find what we want, we scan over them again - * making our way to the next node. Still it's the easiest to - * implement approach; performance can come later. */ - for (offset = fdt_next_node(fdt, startoffset, NULL); - offset >= 0; - offset = fdt_next_node(fdt, offset, NULL)) { - err = fdt_node_check_compatible(fdt, offset, compatible); - if ((err < 0) && (err != -FDT_ERR_NOTFOUND)) - return err; - else if (err == 0) - return offset; - } - - return offset; /* error from fdt_next_node() */ -} diff --git a/arch/powerpc/boot/libfdt/fdt_rw.c b/arch/powerpc/boot/libfdt/fdt_rw.c deleted file mode 100644 index 8e7ec4c..0000000 --- a/arch/powerpc/boot/libfdt/fdt_rw.c +++ /dev/null @@ -1,463 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_blocks_misordered(const void *fdt, - int mem_rsv_size, int struct_size) -{ - return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8)) - || (fdt_off_dt_struct(fdt) < - (fdt_off_mem_rsvmap(fdt) + mem_rsv_size)) - || (fdt_off_dt_strings(fdt) < - (fdt_off_dt_struct(fdt) + struct_size)) - || (fdt_totalsize(fdt) < - (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))); -} - -static int _fdt_rw_check_header(void *fdt) -{ - FDT_CHECK_HEADER(fdt); - - if (fdt_version(fdt) < 17) - return -FDT_ERR_BADVERSION; - if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry), - fdt_size_dt_struct(fdt))) - return -FDT_ERR_BADLAYOUT; - if (fdt_version(fdt) > 17) - fdt_set_version(fdt, 17); - - return 0; -} - -#define FDT_RW_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = _fdt_rw_check_header(fdt)) != 0) \ - return err; \ - } - -static inline int _fdt_data_size(void *fdt) -{ - return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); -} - -static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen) -{ - char *p = splicepoint; - char *end = (char *)fdt + _fdt_data_size(fdt); - - if (((p + oldlen) < p) || ((p + oldlen) > end)) - return -FDT_ERR_BADOFFSET; - if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt))) - return -FDT_ERR_NOSPACE; - memmove(p + newlen, p + oldlen, end - p - oldlen); - return 0; -} - -static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p, - int oldn, int newn) -{ - int delta = (newn - oldn) * sizeof(*p); - int err; - err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p)); - if (err) - return err; - fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta); - fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); - return 0; -} - -static int _fdt_splice_struct(void *fdt, void *p, - int oldlen, int newlen) -{ - int delta = newlen - oldlen; - int err; - - if ((err = _fdt_splice(fdt, p, oldlen, newlen))) - return err; - - fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta); - fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); - return 0; -} - -static int _fdt_splice_string(void *fdt, int newlen) -{ - void *p = (char *)fdt - + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); - int err; - - if ((err = _fdt_splice(fdt, p, 0, newlen))) - return err; - - fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen); - return 0; -} - -static int _fdt_find_add_string(void *fdt, const char *s) -{ - char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); - const char *p; - char *new; - int len = strlen(s) + 1; - int err; - - p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s); - if (p) - /* found it */ - return (p - strtab); - - new = strtab + fdt_size_dt_strings(fdt); - err = _fdt_splice_string(fdt, len); - if (err) - return err; - - memcpy(new, s, len); - return (new - strtab); -} - -int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size) -{ - struct fdt_reserve_entry *re; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt)); - err = _fdt_splice_mem_rsv(fdt, re, 0, 1); - if (err) - return err; - - re->address = cpu_to_fdt64(address); - re->size = cpu_to_fdt64(size); - return 0; -} - -int fdt_del_mem_rsv(void *fdt, int n) -{ - struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n); - int err; - - FDT_RW_CHECK_HEADER(fdt); - - if (n >= fdt_num_mem_rsv(fdt)) - return -FDT_ERR_NOTFOUND; - - err = _fdt_splice_mem_rsv(fdt, re, 1, 0); - if (err) - return err; - return 0; -} - -static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name, - int len, struct fdt_property **prop) -{ - int oldlen; - int err; - - *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); - if (! (*prop)) - return oldlen; - - if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen), - FDT_TAGALIGN(len)))) - return err; - - (*prop)->len = cpu_to_fdt32(len); - return 0; -} - -static int _fdt_add_property(void *fdt, int nodeoffset, const char *name, - int len, struct fdt_property **prop) -{ - int proplen; - int nextoffset; - int namestroff; - int err; - - if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0) - return nextoffset; - - namestroff = _fdt_find_add_string(fdt, name); - if (namestroff < 0) - return namestroff; - - *prop = _fdt_offset_ptr_w(fdt, nextoffset); - proplen = sizeof(**prop) + FDT_TAGALIGN(len); - - err = _fdt_splice_struct(fdt, *prop, 0, proplen); - if (err) - return err; - - (*prop)->tag = cpu_to_fdt32(FDT_PROP); - (*prop)->nameoff = cpu_to_fdt32(namestroff); - (*prop)->len = cpu_to_fdt32(len); - return 0; -} - -int fdt_set_name(void *fdt, int nodeoffset, const char *name) -{ - char *namep; - int oldlen, newlen; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen); - if (!namep) - return oldlen; - - newlen = strlen(name); - - err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1), - FDT_TAGALIGN(newlen+1)); - if (err) - return err; - - memcpy(namep, name, newlen+1); - return 0; -} - -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len) -{ - struct fdt_property *prop; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop); - if (err == -FDT_ERR_NOTFOUND) - err = _fdt_add_property(fdt, nodeoffset, name, len, &prop); - if (err) - return err; - - memcpy(prop->data, val, len); - return 0; -} - -int fdt_delprop(void *fdt, int nodeoffset, const char *name) -{ - struct fdt_property *prop; - int len, proplen; - - FDT_RW_CHECK_HEADER(fdt); - - prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) - return len; - - proplen = sizeof(*prop) + FDT_TAGALIGN(len); - return _fdt_splice_struct(fdt, prop, proplen, 0); -} - -int fdt_add_subnode_namelen(void *fdt, int parentoffset, - const char *name, int namelen) -{ - struct fdt_node_header *nh; - int offset, nextoffset; - int nodelen; - int err; - uint32_t tag; - uint32_t *endtag; - - FDT_RW_CHECK_HEADER(fdt); - - offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); - if (offset >= 0) - return -FDT_ERR_EXISTS; - else if (offset != -FDT_ERR_NOTFOUND) - return offset; - - /* Try to place the new node after the parent's properties */ - fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */ - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - } while ((tag == FDT_PROP) || (tag == FDT_NOP)); - - nh = _fdt_offset_ptr_w(fdt, offset); - nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE; - - err = _fdt_splice_struct(fdt, nh, 0, nodelen); - if (err) - return err; - - nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); - memset(nh->name, 0, FDT_TAGALIGN(namelen+1)); - memcpy(nh->name, name, namelen); - endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE); - *endtag = cpu_to_fdt32(FDT_END_NODE); - - return offset; -} - -int fdt_add_subnode(void *fdt, int parentoffset, const char *name) -{ - return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); -} - -int fdt_del_node(void *fdt, int nodeoffset) -{ - int endoffset; - - FDT_RW_CHECK_HEADER(fdt); - - endoffset = _fdt_node_end_offset(fdt, nodeoffset); - if (endoffset < 0) - return endoffset; - - return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset), - endoffset - nodeoffset, 0); -} - -static void _fdt_packblocks(const char *old, char *new, - int mem_rsv_size, int struct_size) -{ - int mem_rsv_off, struct_off, strings_off; - - mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8); - struct_off = mem_rsv_off + mem_rsv_size; - strings_off = struct_off + struct_size; - - memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size); - fdt_set_off_mem_rsvmap(new, mem_rsv_off); - - memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size); - fdt_set_off_dt_struct(new, struct_off); - fdt_set_size_dt_struct(new, struct_size); - - memmove(new + strings_off, old + fdt_off_dt_strings(old), - fdt_size_dt_strings(old)); - fdt_set_off_dt_strings(new, strings_off); - fdt_set_size_dt_strings(new, fdt_size_dt_strings(old)); -} - -int fdt_open_into(const void *fdt, void *buf, int bufsize) -{ - int err; - int mem_rsv_size, struct_size; - int newsize; - const char *fdtstart = fdt; - const char *fdtend = fdtstart + fdt_totalsize(fdt); - char *tmp; - - FDT_CHECK_HEADER(fdt); - - mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) - * sizeof(struct fdt_reserve_entry); - - if (fdt_version(fdt) >= 17) { - struct_size = fdt_size_dt_struct(fdt); - } else { - struct_size = 0; - while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END) - ; - } - - if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) { - /* no further work necessary */ - err = fdt_move(fdt, buf, bufsize); - if (err) - return err; - fdt_set_version(buf, 17); - fdt_set_size_dt_struct(buf, struct_size); - fdt_set_totalsize(buf, bufsize); - return 0; - } - - /* Need to reorder */ - newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size - + struct_size + fdt_size_dt_strings(fdt); - - if (bufsize < newsize) - return -FDT_ERR_NOSPACE; - - /* First attempt to build converted tree at beginning of buffer */ - tmp = buf; - /* But if that overlaps with the old tree... */ - if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) { - /* Try right after the old tree instead */ - tmp = (char *)(uintptr_t)fdtend; - if ((tmp + newsize) > ((char *)buf + bufsize)) - return -FDT_ERR_NOSPACE; - } - - _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size); - memmove(buf, tmp, newsize); - - fdt_set_magic(buf, FDT_MAGIC); - fdt_set_totalsize(buf, bufsize); - fdt_set_version(buf, 17); - fdt_set_last_comp_version(buf, 16); - fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt)); - - return 0; -} - -int fdt_pack(void *fdt) -{ - int mem_rsv_size; - - FDT_RW_CHECK_HEADER(fdt); - - mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) - * sizeof(struct fdt_reserve_entry); - _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt)); - fdt_set_totalsize(fdt, _fdt_data_size(fdt)); - - return 0; -} diff --git a/arch/powerpc/boot/libfdt/fdt_strerror.c b/arch/powerpc/boot/libfdt/fdt_strerror.c deleted file mode 100644 index e6c3cee..0000000 --- a/arch/powerpc/boot/libfdt/fdt_strerror.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -struct fdt_errtabent { - const char *str; -}; - -#define FDT_ERRTABENT(val) \ - [(val)] = { .str = #val, } - -static struct fdt_errtabent fdt_errtable[] = { - FDT_ERRTABENT(FDT_ERR_NOTFOUND), - FDT_ERRTABENT(FDT_ERR_EXISTS), - FDT_ERRTABENT(FDT_ERR_NOSPACE), - - FDT_ERRTABENT(FDT_ERR_BADOFFSET), - FDT_ERRTABENT(FDT_ERR_BADPATH), - FDT_ERRTABENT(FDT_ERR_BADSTATE), - - FDT_ERRTABENT(FDT_ERR_TRUNCATED), - FDT_ERRTABENT(FDT_ERR_BADMAGIC), - FDT_ERRTABENT(FDT_ERR_BADVERSION), - FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE), - FDT_ERRTABENT(FDT_ERR_BADLAYOUT), -}; -#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0])) - -const char *fdt_strerror(int errval) -{ - if (errval > 0) - return ""; - else if (errval == 0) - return ""; - else if (errval > -FDT_ERRTABSIZE) { - const char *s = fdt_errtable[-errval].str; - - if (s) - return s; - } - - return ""; -} diff --git a/arch/powerpc/boot/libfdt/fdt_sw.c b/arch/powerpc/boot/libfdt/fdt_sw.c deleted file mode 100644 index 698329e..0000000 --- a/arch/powerpc/boot/libfdt/fdt_sw.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_sw_check_header(void *fdt) -{ - if (fdt_magic(fdt) != FDT_SW_MAGIC) - return -FDT_ERR_BADMAGIC; - /* FIXME: should check more details about the header state */ - return 0; -} - -#define FDT_SW_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = _fdt_sw_check_header(fdt)) != 0) \ - return err; \ - } - -static void *_fdt_grab_space(void *fdt, int len) -{ - int offset = fdt_size_dt_struct(fdt); - int spaceleft; - - spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) - - fdt_size_dt_strings(fdt); - - if ((offset + len < offset) || (offset + len > spaceleft)) - return NULL; - - fdt_set_size_dt_struct(fdt, offset + len); - return fdt_offset_ptr_w(fdt, offset, len); -} - -int fdt_create(void *buf, int bufsize) -{ - void *fdt = buf; - - if (bufsize < sizeof(struct fdt_header)) - return -FDT_ERR_NOSPACE; - - memset(buf, 0, bufsize); - - fdt_set_magic(fdt, FDT_SW_MAGIC); - fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); - fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); - fdt_set_totalsize(fdt, bufsize); - - fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header), - sizeof(struct fdt_reserve_entry))); - fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt)); - fdt_set_off_dt_strings(fdt, bufsize); - - return 0; -} - -int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) -{ - struct fdt_reserve_entry *re; - int offset; - - FDT_SW_CHECK_HEADER(fdt); - - if (fdt_size_dt_struct(fdt)) - return -FDT_ERR_BADSTATE; - - offset = fdt_off_dt_struct(fdt); - if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) - return -FDT_ERR_NOSPACE; - - re = (struct fdt_reserve_entry *)((char *)fdt + offset); - re->address = cpu_to_fdt64(addr); - re->size = cpu_to_fdt64(size); - - fdt_set_off_dt_struct(fdt, offset + sizeof(*re)); - - return 0; -} - -int fdt_finish_reservemap(void *fdt) -{ - return fdt_add_reservemap_entry(fdt, 0, 0); -} - -int fdt_begin_node(void *fdt, const char *name) -{ - struct fdt_node_header *nh; - int namelen = strlen(name) + 1; - - FDT_SW_CHECK_HEADER(fdt); - - nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen)); - if (! nh) - return -FDT_ERR_NOSPACE; - - nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); - memcpy(nh->name, name, namelen); - return 0; -} - -int fdt_end_node(void *fdt) -{ - uint32_t *en; - - FDT_SW_CHECK_HEADER(fdt); - - en = _fdt_grab_space(fdt, FDT_TAGSIZE); - if (! en) - return -FDT_ERR_NOSPACE; - - *en = cpu_to_fdt32(FDT_END_NODE); - return 0; -} - -static int _fdt_find_add_string(void *fdt, const char *s) -{ - char *strtab = (char *)fdt + fdt_totalsize(fdt); - const char *p; - int strtabsize = fdt_size_dt_strings(fdt); - int len = strlen(s) + 1; - int struct_top, offset; - - p = _fdt_find_string(strtab - strtabsize, strtabsize, s); - if (p) - return p - strtab; - - /* Add it */ - offset = -strtabsize - len; - struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); - if (fdt_totalsize(fdt) + offset < struct_top) - return 0; /* no more room :( */ - - memcpy(strtab + offset, s, len); - fdt_set_size_dt_strings(fdt, strtabsize + len); - return offset; -} - -int fdt_property(void *fdt, const char *name, const void *val, int len) -{ - struct fdt_property *prop; - int nameoff; - - FDT_SW_CHECK_HEADER(fdt); - - nameoff = _fdt_find_add_string(fdt, name); - if (nameoff == 0) - return -FDT_ERR_NOSPACE; - - prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len)); - if (! prop) - return -FDT_ERR_NOSPACE; - - prop->tag = cpu_to_fdt32(FDT_PROP); - prop->nameoff = cpu_to_fdt32(nameoff); - prop->len = cpu_to_fdt32(len); - memcpy(prop->data, val, len); - return 0; -} - -int fdt_finish(void *fdt) -{ - char *p = (char *)fdt; - uint32_t *end; - int oldstroffset, newstroffset; - uint32_t tag; - int offset, nextoffset; - - FDT_SW_CHECK_HEADER(fdt); - - /* Add terminator */ - end = _fdt_grab_space(fdt, sizeof(*end)); - if (! end) - return -FDT_ERR_NOSPACE; - *end = cpu_to_fdt32(FDT_END); - - /* Relocate the string table */ - oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); - newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); - memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); - fdt_set_off_dt_strings(fdt, newstroffset); - - /* Walk the structure, correcting string offsets */ - offset = 0; - while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) { - if (tag == FDT_PROP) { - struct fdt_property *prop = - fdt_offset_ptr_w(fdt, offset, sizeof(*prop)); - int nameoff; - - if (! prop) - return -FDT_ERR_BADSTRUCTURE; - - nameoff = fdt32_to_cpu(prop->nameoff); - nameoff += fdt_size_dt_strings(fdt); - prop->nameoff = cpu_to_fdt32(nameoff); - } - offset = nextoffset; - } - - /* Finally, adjust the header */ - fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt)); - fdt_set_magic(fdt, FDT_MAGIC); - return 0; -} diff --git a/arch/powerpc/boot/libfdt/fdt_wip.c b/arch/powerpc/boot/libfdt/fdt_wip.c deleted file mode 100644 index a4652c6..0000000 --- a/arch/powerpc/boot/libfdt/fdt_wip.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, - const void *val, int len) -{ - void *propval; - int proplen; - - propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen); - if (! propval) - return proplen; - - if (proplen != len) - return -FDT_ERR_NOSPACE; - - memcpy(propval, val, len); - return 0; -} - -static void _fdt_nop_region(void *start, int len) -{ - uint32_t *p; - - for (p = start; (char *)p < ((char *)start + len); p++) - *p = cpu_to_fdt32(FDT_NOP); -} - -int fdt_nop_property(void *fdt, int nodeoffset, const char *name) -{ - struct fdt_property *prop; - int len; - - prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) - return len; - - _fdt_nop_region(prop, len + sizeof(*prop)); - - return 0; -} - -int _fdt_node_end_offset(void *fdt, int nodeoffset) -{ - int level = 0; - uint32_t tag; - int offset, nextoffset; - - tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); - if (tag != FDT_BEGIN_NODE) - return -FDT_ERR_BADOFFSET; - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - - switch (tag) { - case FDT_END: - return offset; - - case FDT_BEGIN_NODE: - level++; - break; - - case FDT_END_NODE: - level--; - break; - - case FDT_PROP: - case FDT_NOP: - break; - - default: - return -FDT_ERR_BADSTRUCTURE; - } - } while (level >= 0); - - return nextoffset; -} - -int fdt_nop_node(void *fdt, int nodeoffset) -{ - int endoffset; - - endoffset = _fdt_node_end_offset(fdt, nodeoffset); - if (endoffset < 0) - return endoffset; - - _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), - endoffset - nodeoffset); - return 0; -} diff --git a/arch/powerpc/boot/libfdt/libfdt.h b/arch/powerpc/boot/libfdt/libfdt.h deleted file mode 100644 index ce80e4f..0000000 --- a/arch/powerpc/boot/libfdt/libfdt.h +++ /dev/null @@ -1,1076 +0,0 @@ -#ifndef _LIBFDT_H -#define _LIBFDT_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include - -#define FDT_FIRST_SUPPORTED_VERSION 0x10 -#define FDT_LAST_SUPPORTED_VERSION 0x11 - -/* Error codes: informative error codes */ -#define FDT_ERR_NOTFOUND 1 - /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ -#define FDT_ERR_EXISTS 2 - /* FDT_ERR_EXISTS: Attemped to create a node or property which - * already exists */ -#define FDT_ERR_NOSPACE 3 - /* FDT_ERR_NOSPACE: Operation needed to expand the device - * tree, but its buffer did not have sufficient space to - * contain the expanded tree. Use fdt_open_into() to move the - * device tree to a buffer with more space. */ - -/* Error codes: codes for bad parameters */ -#define FDT_ERR_BADOFFSET 4 - /* FDT_ERR_BADOFFSET: Function was passed a structure block - * offset which is out-of-bounds, or which points to an - * unsuitable part of the structure for the operation. */ -#define FDT_ERR_BADPATH 5 - /* FDT_ERR_BADPATH: Function was passed a badly formatted path - * (e.g. missing a leading / for a function which requires an - * absolute path) */ -#define FDT_ERR_BADPHANDLE 6 - /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle - * value. phandle values of 0 and -1 are not permitted. */ -#define FDT_ERR_BADSTATE 7 - /* FDT_ERR_BADSTATE: Function was passed an incomplete device - * tree created by the sequential-write functions, which is - * not sufficiently complete for the requested operation. */ - -/* Error codes: codes for bad device tree blobs */ -#define FDT_ERR_TRUNCATED 8 - /* FDT_ERR_TRUNCATED: Structure block of the given device tree - * ends without an FDT_END tag. */ -#define FDT_ERR_BADMAGIC 9 - /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a - * device tree at all - it is missing the flattened device - * tree magic number. */ -#define FDT_ERR_BADVERSION 10 - /* FDT_ERR_BADVERSION: Given device tree has a version which - * can't be handled by the requested operation. For - * read-write functions, this may mean that fdt_open_into() is - * required to convert the tree to the expected version. */ -#define FDT_ERR_BADSTRUCTURE 11 - /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt - * structure block or other serious error (e.g. misnested - * nodes, or subnodes preceding properties). */ -#define FDT_ERR_BADLAYOUT 12 - /* FDT_ERR_BADLAYOUT: For read-write functions, the given - * device tree has it's sub-blocks in an order that the - * function can't handle (memory reserve map, then structure, - * then strings). Use fdt_open_into() to reorganize the tree - * into a form suitable for the read-write operations. */ - -/* "Can't happen" error indicating a bug in libfdt */ -#define FDT_ERR_INTERNAL 13 - /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. - * Should never be returned, if it is, it indicates a bug in - * libfdt itself. */ - -#define FDT_ERR_MAX 13 - -/**********************************************************************/ -/* Low-level functions (you probably don't need these) */ -/**********************************************************************/ - -const void *fdt_offset_ptr(const void *fdt, int offset, int checklen); -static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) -{ - return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); -} - -uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); - -/**********************************************************************/ -/* Traversal functions */ -/**********************************************************************/ - -int fdt_next_node(const void *fdt, int offset, int *depth); - -/**********************************************************************/ -/* General functions */ -/**********************************************************************/ - -#define fdt_get_header(fdt, field) \ - (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) -#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) -#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) -#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) -#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) -#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) -#define fdt_version(fdt) (fdt_get_header(fdt, version)) -#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) -#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) -#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) -#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) - -#define __fdt_set_hdr(name) \ - static inline void fdt_set_##name(void *fdt, uint32_t val) \ - { \ - struct fdt_header *fdth = fdt; \ - fdth->name = cpu_to_fdt32(val); \ - } -__fdt_set_hdr(magic); -__fdt_set_hdr(totalsize); -__fdt_set_hdr(off_dt_struct); -__fdt_set_hdr(off_dt_strings); -__fdt_set_hdr(off_mem_rsvmap); -__fdt_set_hdr(version); -__fdt_set_hdr(last_comp_version); -__fdt_set_hdr(boot_cpuid_phys); -__fdt_set_hdr(size_dt_strings); -__fdt_set_hdr(size_dt_struct); -#undef __fdt_set_hdr - -/** - * fdt_check_header - sanity check a device tree or possible device tree - * @fdt: pointer to data which might be a flattened device tree - * - * fdt_check_header() checks that the given buffer contains what - * appears to be a flattened device tree with sane information in its - * header. - * - * returns: - * 0, if the buffer appears to contain a valid device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings, as above - */ -int fdt_check_header(const void *fdt); - -/** - * fdt_move - move a device tree around in memory - * @fdt: pointer to the device tree to move - * @buf: pointer to memory where the device is to be moved - * @bufsize: size of the memory space at buf - * - * fdt_move() relocates, if possible, the device tree blob located at - * fdt to the buffer at buf of size bufsize. The buffer may overlap - * with the existing device tree blob at fdt. Therefore, - * fdt_move(fdt, fdt, fdt_totalsize(fdt)) - * should always succeed. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_move(const void *fdt, void *buf, int bufsize); - -/**********************************************************************/ -/* Read-only functions */ -/**********************************************************************/ - -/** - * fdt_string - retrieve a string from the strings block of a device tree - * @fdt: pointer to the device tree blob - * @stroffset: offset of the string within the strings block (native endian) - * - * fdt_string() retrieves a pointer to a single string from the - * strings block of the device tree blob at fdt. - * - * returns: - * a pointer to the string, on success - * NULL, if stroffset is out of bounds - */ -const char *fdt_string(const void *fdt, int stroffset); - -/** - * fdt_num_mem_rsv - retrieve the number of memory reserve map entries - * @fdt: pointer to the device tree blob - * - * Returns the number of entries in the device tree blob's memory - * reservation map. This does not include the terminating 0,0 entry - * or any other (0,0) entries reserved for expansion. - * - * returns: - * the number of entries - */ -int fdt_num_mem_rsv(const void *fdt); - -/** - * fdt_get_mem_rsv - retrieve one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: pointers to 64-bit variables - * - * On success, *address and *size will contain the address and size of - * the n-th reserve map entry from the device tree blob, in - * native-endian format. - * - * returns: - * 0, on success - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); - -/** - * fdt_subnode_offset_namelen - find a subnode based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_subnode_offset(), but only examine the first - * namelen characters of name for matching the subnode name. This is - * useful for finding subnodes based on a portion of a larger string, - * such as a full path. - */ -int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, - const char *name, int namelen); -/** - * fdt_subnode_offset - find a subnode of a given node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_subnode_offset() finds a subnode of the node at structure block - * offset parentoffset with the given name. name may include a unit - * address, in which case fdt_subnode_offset() will find the subnode - * with that unit address, or the unit address may be omitted, in - * which case fdt_subnode_offset() will find an arbitrary subnode - * whose name excluding unit address matches the given name. - * - * returns: - * structure block offset of the requested subnode (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); - -/** - * fdt_path_offset - find a tree node by its full path - * @fdt: pointer to the device tree blob - * @path: full path of the node to locate - * - * fdt_path_offset() finds a node of a given path in the device tree. - * Each path component may omit the unit address portion, but the - * results of this are undefined if any such path component is - * ambiguous (that is if there are multiple nodes at the relevant - * level matching the given component, differentiated only by unit - * address). - * - * returns: - * structure block offset of the node with the requested path (>=0), on success - * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid - * -FDT_ERR_NOTFOUND, if the requested node does not exist - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_path_offset(const void *fdt, const char *path); - -/** - * fdt_get_name - retrieve the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the starting node - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_name() retrieves the name (including unit address) of the - * device tree node at structure block offset nodeoffset. If lenp is - * non-NULL, the length of this name is also returned, in the integer - * pointed to by lenp. - * - * returns: - * pointer to the node's name, on success - * If lenp is non-NULL, *lenp contains the length of that name (>=0) - * NULL, on error - * if lenp is non-NULL *lenp contains an error code (<0): - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); - -/** - * fdt_get_property - find a given property in a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_property() retrieves a pointer to the fdt_property - * structure within the device tree blob corresponding to the property - * named 'name' of the node at offset nodeoffset. If lenp is - * non-NULL, the length of the property value is also returned, in the - * integer pointed to by lenp. - * - * returns: - * pointer to the structure representing the property - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, - const char *name, - int *lenp) -{ - return (struct fdt_property *)(uintptr_t) - fdt_get_property(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_getprop - retrieve the value of a given property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_getprop() retrieves a pointer to the value of the property - * named 'name' of the node at offset nodeoffset (this will be a - * pointer to within the device blob itself, not a copy of the value). - * If lenp is non-NULL, the length of the property value is also - * returned, in the integer pointed to by lenp. - * - * returns: - * pointer to the property's value - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline void *fdt_getprop_w(void *fdt, int nodeoffset, - const char *name, int *lenp) -{ - return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_get_phandle - retrieve the phandle of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the node - * - * fdt_get_phandle() retrieves the phandle of the device tree node at - * structure block offset nodeoffset. - * - * returns: - * the phandle of the node at nodeoffset, on success (!= 0, != -1) - * 0, if the node has no phandle, or another error occurs - */ -uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); - -/** - * fdt_get_path - determine the full path of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose path to find - * @buf: character buffer to contain the returned path (will be overwritten) - * @buflen: size of the character buffer at buf - * - * fdt_get_path() computes the full path of the node at offset - * nodeoffset, and records that path in the buffer at buf. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * 0, on success - * buf contains the absolute path of the node at - * nodeoffset, as a NUL-terminated string. - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) - * characters and will not fit in the given buffer. - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); - -/** - * fdt_supernode_atdepth_offset - find a specific ancestor of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * @supernodedepth: depth of the ancestor to find - * @nodedepth: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_supernode_atdepth_offset() finds an ancestor of the given node - * at a specific depth from the root (where the root itself has depth - * 0, its immediate subnodes depth 1 and so forth). So - * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); - * will always return 0, the offset of the root node. If the node at - * nodeoffset has depth D, then: - * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); - * will return nodeoffset itself. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - - * structure block offset of the node at node offset's ancestor - * of depth supernodedepth (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag -* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, - int supernodedepth, int *nodedepth); - -/** - * fdt_node_depth - find the depth of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_node_depth() finds the depth of a given node. The root node - * has depth 0, its immediate subnodes depth 1 and so forth. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * depth of the node at nodeoffset (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_depth(const void *fdt, int nodeoffset); - -/** - * fdt_parent_offset - find the parent of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_parent_offset() locates the parent node of a given node (that - * is, it finds the offset of the node which contains the node at - * nodeoffset as a subnode). - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset, *twice*. - * - * returns: - * structure block offset of the parent of the node at nodeoffset - * (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_parent_offset(const void *fdt, int nodeoffset); - -/** - * fdt_node_offset_by_prop_value - find nodes with a given property value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @propname: property name to check - * @propval: property value to search for - * @proplen: length of the value in propval - * - * fdt_node_offset_by_prop_value() returns the offset of the first - * node after startoffset, which has a property named propname whose - * value is of length proplen and has value equal to propval; or if - * startoffset is -1, the very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, - * propval, proplen); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, - * propval, proplen); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, - const char *propname, - const void *propval, int proplen); - -/** - * fdt_node_offset_by_phandle - find the node with a given phandle - * @fdt: pointer to the device tree blob - * @phandle: phandle value - * - * fdt_node_offset_by_phandle() returns the offset of the node - * which has the given phandle value. If there is more than one node - * in the tree with the given phandle (an invalid tree), results are - * undefined. - * - * returns: - * structure block offset of the located node (>= 0), on success - * -FDT_ERR_NOTFOUND, no node with that phandle exists - * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); - -/** - * fdt_node_check_compatible: check a node's compatible property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of a tree node - * @compatible: string to match against - * - * - * fdt_node_check_compatible() returns 0 if the given node contains a - * 'compatible' property with the given string as one of its elements, - * it returns non-zero otherwise, or on error. - * - * returns: - * 0, if the node has a 'compatible' property listing the given string - * 1, if the node has a 'compatible' property, but it does not list - * the given string - * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property - * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_check_compatible(const void *fdt, int nodeoffset, - const char *compatible); - -/** - * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @compatible: 'compatible' string to match against - * - * fdt_node_offset_by_compatible() returns the offset of the first - * node after startoffset, which has a 'compatible' property which - * lists the given compatible string; or if startoffset is -1, the - * very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_compatible(const void *fdt, int startoffset, - const char *compatible); - -/**********************************************************************/ -/* Write-in-place functions */ -/**********************************************************************/ - -/** - * fdt_setprop_inplace - change a property's value, but not its size - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to replace the property value with - * @len: length of the property value - * - * fdt_setprop_inplace() replaces the value of a given property with - * the data in val, of length len. This function cannot change the - * size of a property, and so will only work if len is equal to the - * current length of the property. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if len is not equal to the property's current length - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_inplace_cell - change the value of a single-cell property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: cell (32-bit integer) value to replace the property with - * - * fdt_setprop_inplace_cell() replaces the value of a given property - * with the 32-bit integer cell value in val, converting val to - * big-endian if necessary. This function cannot change the size of a - * property, and so will only work if the property already exists and - * has length 4. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, - const char *name, uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); -} - -/** - * fdt_nop_property - replace a property with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_nop_property() will replace a given property's representation - * in the blob with FDT_NOP tags, effectively removing it from the - * tree. - * - * This function will alter only the bytes in the blob which contain - * the property, and will not alter or move any other part of the - * tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_property(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_nop_node - replace a node (subtree) with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_nop_node() will replace a given node's representation in the - * blob, including all its subnodes, if any, with FDT_NOP tags, - * effectively removing it from the tree. - * - * This function will alter only the bytes in the blob which contain - * the node and its properties and subnodes, and will not alter or - * move any other part of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_node(void *fdt, int nodeoffset); - -/**********************************************************************/ -/* Sequential write functions */ -/**********************************************************************/ - -int fdt_create(void *buf, int bufsize); -int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); -int fdt_finish_reservemap(void *fdt); -int fdt_begin_node(void *fdt, const char *name); -int fdt_property(void *fdt, const char *name, const void *val, int len); -static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_property(fdt, name, &val, sizeof(val)); -} -#define fdt_property_string(fdt, name, str) \ - fdt_property(fdt, name, str, strlen(str)+1) -int fdt_end_node(void *fdt); -int fdt_finish(void *fdt); - -/**********************************************************************/ -/* Read-write functions */ -/**********************************************************************/ - -int fdt_open_into(const void *fdt, void *buf, int bufsize); -int fdt_pack(void *fdt); - -/** - * fdt_add_mem_rsv - add one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: 64-bit values (native endian) - * - * Adds a reserve map entry to the given blob reserving a region at - * address address of length size. - * - * This function will insert data into the reserve map and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new reservation entry - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); - -/** - * fdt_del_mem_rsv - remove a memory reserve map entry - * @fdt: pointer to the device tree blob - * @n: entry to remove - * - * fdt_del_mem_rsv() removes the n-th memory reserve map entry from - * the blob. - * - * This function will delete data from the reservation table and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there - * are less than n+1 reserve map entries) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_mem_rsv(void *fdt, int n); - -/** - * fdt_set_name - change the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of a node - * @name: name to give the node - * - * fdt_set_name() replaces the name (including unit address, if any) - * of the given node with the given string. NOTE: this function can't - * efficiently check if the new name is unique amongst the given - * node's siblings; results are undefined if this function is invoked - * with a name equal to one of the given node's siblings. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob - * to contain the new name - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_set_name(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_setprop - create or change a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to set the property value to - * @len: length of the property value - * - * fdt_setprop() sets the value of the named property in the given - * node to the given value and length, creating the property if it - * does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_cell - set a property to a single cell value - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 32-bit integer value for the property (native endian) - * - * fdt_setprop_cell() sets the value of the named property in the - * given node to the given cell value (converting to big-endian if - * necessary), or creates a new property with that value if it does - * not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, - uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); -} - -/** - * fdt_setprop_string - set a property to a string value - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @str: string value for the property - * - * fdt_setprop_string() sets the value of the named property in the - * given node to the given string value (using the length of the - * string to determine the new length of the property), or creates a - * new property with that value if it does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -#define fdt_setprop_string(fdt, nodeoffset, name, str) \ - fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) - -/** - * fdt_delprop - delete a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_del_property() will delete the given property. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_delprop(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_add_subnode_namelen - creates a new node based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_add_subnode(), but use only the first namelen - * characters of name as the name of the new node. This is useful for - * creating subnodes based on a portion of a larger string, such as a - * full path. - */ -int fdt_add_subnode_namelen(void *fdt, int parentoffset, - const char *name, int namelen); - -/** - * fdt_add_subnode - creates a new node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_add_subnode() creates a new node as a subnode of the node at - * structure block offset parentoffset, with the given name (which - * should include the unit address, if any). - * - * This function will insert data into the blob, and will therefore - * change the offsets of some existing nodes. - - * returns: - * structure block offset of the created nodeequested subnode (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag - * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of - * the given name - * -FDT_ERR_NOSPACE, if there is insufficient free space in the - * blob to contain the new node - * -FDT_ERR_NOSPACE - * -FDT_ERR_BADLAYOUT - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_add_subnode(void *fdt, int parentoffset, const char *name); - -/** - * fdt_del_node - delete a node (subtree) - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_del_node() will remove the given node, including all its - * subnodes if any, from the blob. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_node(void *fdt, int nodeoffset); - -/**********************************************************************/ -/* Debugging / informational functions */ -/**********************************************************************/ - -const char *fdt_strerror(int errval); - -#endif /* _LIBFDT_H */ diff --git a/arch/powerpc/boot/libfdt/libfdt_internal.h b/arch/powerpc/boot/libfdt/libfdt_internal.h deleted file mode 100644 index 46eb93e..0000000 --- a/arch/powerpc/boot/libfdt/libfdt_internal.h +++ /dev/null @@ -1,95 +0,0 @@ -#ifndef _LIBFDT_INTERNAL_H -#define _LIBFDT_INTERNAL_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include - -#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) -#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE)) - -#define FDT_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = fdt_check_header(fdt)) != 0) \ - return err; \ - } - -uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset); -int _fdt_check_node_offset(const void *fdt, int offset); -const char *_fdt_find_string(const char *strtab, int tabsize, const char *s); -int _fdt_node_end_offset(void *fdt, int nodeoffset); - -static inline const void *_fdt_offset_ptr(const void *fdt, int offset) -{ - return (const char *)fdt + fdt_off_dt_struct(fdt) + offset; -} - -static inline void *_fdt_offset_ptr_w(void *fdt, int offset) -{ - return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset); -} - -static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n) -{ - const struct fdt_reserve_entry *rsv_table = - (const struct fdt_reserve_entry *) - ((const char *)fdt + fdt_off_mem_rsvmap(fdt)); - - return rsv_table + n; -} -static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n) -{ - return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n); -} - -#define FDT_SW_MAGIC (~FDT_MAGIC) - -#endif /* _LIBFDT_INTERNAL_H */ diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c index c58a0da..21cd480 100644 --- a/arch/powerpc/boot/simpleboot.c +++ b/arch/powerpc/boot/simpleboot.c @@ -19,7 +19,7 @@ #include "types.h" #include "io.h" #include "stdio.h" -#include "libfdt/libfdt.h" +#include BSS_STACK(4*1024); diff --git a/scripts/Makefile b/scripts/Makefile index aafdf06..9dd5b25 100644 --- a/scripts/Makefile +++ b/scripts/Makefile @@ -21,6 +21,7 @@ hostprogs-y += unifdef subdir-$(CONFIG_MODVERSIONS) += genksyms subdir-y += mod subdir-$(CONFIG_SECURITY_SELINUX) += selinux +subdir-$(CONFIG_DTC) += dtc # Let clean descend into subdirs subdir- += basic kconfig package selinux diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile new file mode 100644 index 0000000..01cdb36 --- /dev/null +++ b/scripts/dtc/Makefile @@ -0,0 +1,54 @@ +# scripts/dtc makefile + +hostprogs-y := dtc +always := $(hostprogs-y) + +dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \ + srcpos.o checks.o +dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o + +# Source files need to get at the userspace version of libfdt_env.h to compile + +HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt + +HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC) + +HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC) + +# dependencies on generated files need to be listed explicitly +$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h +$(obj)/dtc-lexer.lex.o: $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h + +targets += dtc-parser.tab.c dtc-lexer.lex.c + +clean-files += dtc-parser.tab.h + +# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output + +ifdef GENERATE_PARSER + +BISON = bison +FLEX = flex + +quiet_cmd_bison = BISON $@ + cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped +quiet_cmd_flex = FLEX $@ + cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped + +$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE + $(call if_changed,bison) + +$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c + +$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE + $(call if_changed,flex) + +endif diff --git a/scripts/dtc/Makefile.dtc b/scripts/dtc/Makefile.dtc new file mode 100644 index 0000000..6ddf9ec --- /dev/null +++ b/scripts/dtc/Makefile.dtc @@ -0,0 +1,9 @@ +# Makefile.dtc +# +# This is not a complete Makefile of itself. Instead, it is designed to +# be easily embeddable into other systems of Makefiles. +# +DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \ + checks.c +DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c +DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o) diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c new file mode 100644 index 0000000..9548579 --- /dev/null +++ b/scripts/dtc/checks.c @@ -0,0 +1,587 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2007. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +#ifdef TRACE_CHECKS +#define TRACE(c, ...) \ + do { \ + fprintf(stderr, "=== %s: ", (c)->name); \ + fprintf(stderr, __VA_ARGS__); \ + fprintf(stderr, "\n"); \ + } while (0) +#else +#define TRACE(c, fmt, ...) do { } while (0) +#endif + +enum checklevel { + IGNORE = 0, + WARN = 1, + ERROR = 2, +}; + +enum checkstatus { + UNCHECKED = 0, + PREREQ, + PASSED, + FAILED, +}; + +struct check; + +typedef void (*tree_check_fn)(struct check *c, struct node *dt); +typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node); +typedef void (*prop_check_fn)(struct check *c, struct node *dt, + struct node *node, struct property *prop); + +struct check { + const char *name; + tree_check_fn tree_fn; + node_check_fn node_fn; + prop_check_fn prop_fn; + void *data; + enum checklevel level; + enum checkstatus status; + int inprogress; + int num_prereqs; + struct check **prereq; +}; + +#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \ + static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \ + static struct check nm = { \ + .name = #nm, \ + .tree_fn = (tfn), \ + .node_fn = (nfn), \ + .prop_fn = (pfn), \ + .data = (d), \ + .level = (lvl), \ + .status = UNCHECKED, \ + .num_prereqs = ARRAY_SIZE(nm##_prereqs), \ + .prereq = nm##_prereqs, \ + }; + +#define TREE_CHECK(nm, d, lvl, ...) \ + CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__) +#define NODE_CHECK(nm, d, lvl, ...) \ + CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__) +#define PROP_CHECK(nm, d, lvl, ...) \ + CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__) +#define BATCH_CHECK(nm, lvl, ...) \ + CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__) + +#ifdef __GNUC__ +static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3))); +#endif +static inline void check_msg(struct check *c, const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + + if ((c->level < WARN) || (c->level <= quiet)) + return; /* Suppress message */ + + fprintf(stderr, "%s (%s): ", + (c->level == ERROR) ? "ERROR" : "Warning", c->name); + vfprintf(stderr, fmt, ap); + fprintf(stderr, "\n"); +} + +#define FAIL(c, ...) \ + do { \ + TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \ + (c)->status = FAILED; \ + check_msg((c), __VA_ARGS__); \ + } while (0) + +static void check_nodes_props(struct check *c, struct node *dt, struct node *node) +{ + struct node *child; + struct property *prop; + + TRACE(c, "%s", node->fullpath); + if (c->node_fn) + c->node_fn(c, dt, node); + + if (c->prop_fn) + for_each_property(node, prop) { + TRACE(c, "%s\t'%s'", node->fullpath, prop->name); + c->prop_fn(c, dt, node, prop); + } + + for_each_child(node, child) + check_nodes_props(c, dt, child); +} + +static int run_check(struct check *c, struct node *dt) +{ + int error = 0; + int i; + + assert(!c->inprogress); + + if (c->status != UNCHECKED) + goto out; + + c->inprogress = 1; + + for (i = 0; i < c->num_prereqs; i++) { + struct check *prq = c->prereq[i]; + error |= run_check(prq, dt); + if (prq->status != PASSED) { + c->status = PREREQ; + check_msg(c, "Failed prerequisite '%s'", + c->prereq[i]->name); + } + } + + if (c->status != UNCHECKED) + goto out; + + if (c->node_fn || c->prop_fn) + check_nodes_props(c, dt, dt); + + if (c->tree_fn) + c->tree_fn(c, dt); + if (c->status == UNCHECKED) + c->status = PASSED; + + TRACE(c, "\tCompleted, status %d", c->status); + +out: + c->inprogress = 0; + if ((c->status != PASSED) && (c->level == ERROR)) + error = 1; + return error; +} + +/* + * Utility check functions + */ + +static void check_is_string(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + char *propname = c->data; + + prop = get_property(node, propname); + if (!prop) + return; /* Not present, assumed ok */ + + if (!data_is_one_string(prop->val)) + FAIL(c, "\"%s\" property in %s is not a string", + propname, node->fullpath); +} +#define CHECK_IS_STRING(nm, propname, lvl) \ + CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl)) + +static void check_is_cell(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + char *propname = c->data; + + prop = get_property(node, propname); + if (!prop) + return; /* Not present, assumed ok */ + + if (prop->val.len != sizeof(cell_t)) + FAIL(c, "\"%s\" property in %s is not a single cell", + propname, node->fullpath); +} +#define CHECK_IS_CELL(nm, propname, lvl) \ + CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl)) + +/* + * Structural check functions + */ + +static void check_duplicate_node_names(struct check *c, struct node *dt, + struct node *node) +{ + struct node *child, *child2; + + for_each_child(node, child) + for (child2 = child->next_sibling; + child2; + child2 = child2->next_sibling) + if (streq(child->name, child2->name)) + FAIL(c, "Duplicate node name %s", + child->fullpath); +} +NODE_CHECK(duplicate_node_names, NULL, ERROR); + +static void check_duplicate_property_names(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop, *prop2; + + for_each_property(node, prop) + for (prop2 = prop->next; prop2; prop2 = prop2->next) + if (streq(prop->name, prop2->name)) + FAIL(c, "Duplicate property name %s in %s", + prop->name, node->fullpath); +} +NODE_CHECK(duplicate_property_names, NULL, ERROR); + +#define LOWERCASE "abcdefghijklmnopqrstuvwxyz" +#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ" +#define DIGITS "0123456789" +#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-" + +static void check_node_name_chars(struct check *c, struct node *dt, + struct node *node) +{ + int n = strspn(node->name, c->data); + + if (n < strlen(node->name)) + FAIL(c, "Bad character '%c' in node %s", + node->name[n], node->fullpath); +} +NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR); + +static void check_node_name_format(struct check *c, struct node *dt, + struct node *node) +{ + if (strchr(get_unitname(node), '@')) + FAIL(c, "Node %s has multiple '@' characters in name", + node->fullpath); +} +NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars); + +static void check_property_name_chars(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + int n = strspn(prop->name, c->data); + + if (n < strlen(prop->name)) + FAIL(c, "Bad character '%c' in property name \"%s\", node %s", + prop->name[n], prop->name, node->fullpath); +} +PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR); + +static void check_explicit_phandles(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + struct node *other; + cell_t phandle; + + prop = get_property(node, "linux,phandle"); + if (! prop) + return; /* No phandle, that's fine */ + + if (prop->val.len != sizeof(cell_t)) { + FAIL(c, "%s has bad length (%d) linux,phandle property", + node->fullpath, prop->val.len); + return; + } + + phandle = propval_cell(prop); + if ((phandle == 0) || (phandle == -1)) { + FAIL(c, "%s has invalid linux,phandle value 0x%x", + node->fullpath, phandle); + return; + } + + other = get_node_by_phandle(root, phandle); + if (other) { + FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)", + node->fullpath, phandle, other->fullpath); + return; + } + + node->phandle = phandle; +} +NODE_CHECK(explicit_phandles, NULL, ERROR); + +static void check_name_properties(struct check *c, struct node *root, + struct node *node) +{ + struct property **pp, *prop = NULL; + + for (pp = &node->proplist; *pp; pp = &((*pp)->next)) + if (streq((*pp)->name, "name")) { + prop = *pp; + break; + } + + if (!prop) + return; /* No name property, that's fine */ + + if ((prop->val.len != node->basenamelen+1) + || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) { + FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead" + " of base node name)", node->fullpath, prop->val.val); + } else { + /* The name property is correct, and therefore redundant. + * Delete it */ + *pp = prop->next; + free(prop->name); + data_free(prop->val); + free(prop); + } +} +CHECK_IS_STRING(name_is_string, "name", ERROR); +NODE_CHECK(name_properties, NULL, ERROR, &name_is_string); + +/* + * Reference fixup functions + */ + +static void fixup_phandle_references(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + struct marker *m = prop->val.markers; + struct node *refnode; + cell_t phandle; + + for_each_marker_of_type(m, REF_PHANDLE) { + assert(m->offset + sizeof(cell_t) <= prop->val.len); + + refnode = get_node_by_ref(dt, m->ref); + if (! refnode) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + phandle = get_node_phandle(dt, refnode); + *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); + } +} +CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR, + &duplicate_node_names, &explicit_phandles); + +static void fixup_path_references(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + struct marker *m = prop->val.markers; + struct node *refnode; + char *path; + + for_each_marker_of_type(m, REF_PATH) { + assert(m->offset <= prop->val.len); + + refnode = get_node_by_ref(dt, m->ref); + if (!refnode) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + path = refnode->fullpath; + prop->val = data_insert_at_marker(prop->val, m, path, + strlen(path) + 1); + } +} +CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR, + &duplicate_node_names); + +/* + * Semantic checks + */ +CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN); +CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN); +CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN); + +CHECK_IS_STRING(device_type_is_string, "device_type", WARN); +CHECK_IS_STRING(model_is_string, "model", WARN); +CHECK_IS_STRING(status_is_string, "status", WARN); + +static void fixup_addr_size_cells(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + + node->addr_cells = -1; + node->size_cells = -1; + + prop = get_property(node, "#address-cells"); + if (prop) + node->addr_cells = propval_cell(prop); + + prop = get_property(node, "#size-cells"); + if (prop) + node->size_cells = propval_cell(prop); +} +CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN, + &address_cells_is_cell, &size_cells_is_cell); + +#define node_addr_cells(n) \ + (((n)->addr_cells == -1) ? 2 : (n)->addr_cells) +#define node_size_cells(n) \ + (((n)->size_cells == -1) ? 1 : (n)->size_cells) + +static void check_reg_format(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + int addr_cells, size_cells, entrylen; + + prop = get_property(node, "reg"); + if (!prop) + return; /* No "reg", that's fine */ + + if (!node->parent) { + FAIL(c, "Root node has a \"reg\" property"); + return; + } + + if (prop->val.len == 0) + FAIL(c, "\"reg\" property in %s is empty", node->fullpath); + + addr_cells = node_addr_cells(node->parent); + size_cells = node_size_cells(node->parent); + entrylen = (addr_cells + size_cells) * sizeof(cell_t); + + if ((prop->val.len % entrylen) != 0) + FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " + "(#address-cells == %d, #size-cells == %d)", + node->fullpath, prop->val.len, addr_cells, size_cells); +} +NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells); + +static void check_ranges_format(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen; + + prop = get_property(node, "ranges"); + if (!prop) + return; + + if (!node->parent) { + FAIL(c, "Root node has a \"ranges\" property"); + return; + } + + p_addr_cells = node_addr_cells(node->parent); + p_size_cells = node_size_cells(node->parent); + c_addr_cells = node_addr_cells(node); + c_size_cells = node_size_cells(node); + entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t); + + if (prop->val.len == 0) { + if (p_addr_cells != c_addr_cells) + FAIL(c, "%s has empty \"ranges\" property but its " + "#address-cells (%d) differs from %s (%d)", + node->fullpath, c_addr_cells, node->parent->fullpath, + p_addr_cells); + if (p_size_cells != c_size_cells) + FAIL(c, "%s has empty \"ranges\" property but its " + "#size-cells (%d) differs from %s (%d)", + node->fullpath, c_size_cells, node->parent->fullpath, + p_size_cells); + } else if ((prop->val.len % entrylen) != 0) { + FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) " + "(parent #address-cells == %d, child #address-cells == %d, " + "#size-cells == %d)", node->fullpath, prop->val.len, + p_addr_cells, c_addr_cells, c_size_cells); + } +} +NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells); + +/* + * Style checks + */ +static void check_avoid_default_addr_size(struct check *c, struct node *dt, + struct node *node) +{ + struct property *reg, *ranges; + + if (!node->parent) + return; /* Ignore root node */ + + reg = get_property(node, "reg"); + ranges = get_property(node, "ranges"); + + if (!reg && !ranges) + return; + + if ((node->parent->addr_cells == -1)) + FAIL(c, "Relying on default #address-cells value for %s", + node->fullpath); + + if ((node->parent->size_cells == -1)) + FAIL(c, "Relying on default #size-cells value for %s", + node->fullpath); +} +NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells); + +static void check_obsolete_chosen_interrupt_controller(struct check *c, + struct node *dt) +{ + struct node *chosen; + struct property *prop; + + chosen = get_node_by_path(dt, "/chosen"); + if (!chosen) + return; + + prop = get_property(chosen, "interrupt-controller"); + if (prop) + FAIL(c, "/chosen has obsolete \"interrupt-controller\" " + "property"); +} +TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN); + +static struct check *check_table[] = { + &duplicate_node_names, &duplicate_property_names, + &node_name_chars, &node_name_format, &property_name_chars, + &name_is_string, &name_properties, + &explicit_phandles, + &phandle_references, &path_references, + + &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell, + &device_type_is_string, &model_is_string, &status_is_string, + + &addr_size_cells, ®_format, &ranges_format, + + &avoid_default_addr_size, + &obsolete_chosen_interrupt_controller, +}; + +void process_checks(int force, struct boot_info *bi) +{ + struct node *dt = bi->dt; + int i; + int error = 0; + + for (i = 0; i < ARRAY_SIZE(check_table); i++) { + struct check *c = check_table[i]; + + if (c->level != IGNORE) + error = error || run_check(c, dt); + } + + if (error) { + if (!force) { + fprintf(stderr, "ERROR: Input tree has errors, aborting " + "(use -f to force output)\n"); + exit(2); + } else if (quiet < 3) { + fprintf(stderr, "Warning: Input tree has errors, " + "output forced\n"); + } + } +} diff --git a/scripts/dtc/data.c b/scripts/dtc/data.c new file mode 100644 index 0000000..dd2e3d3 --- /dev/null +++ b/scripts/dtc/data.c @@ -0,0 +1,321 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +void data_free(struct data d) +{ + struct marker *m, *nm; + + m = d.markers; + while (m) { + nm = m->next; + free(m->ref); + free(m); + m = nm; + } + + if (d.val) + free(d.val); +} + +struct data data_grow_for(struct data d, int xlen) +{ + struct data nd; + int newsize; + + if (xlen == 0) + return d; + + nd = d; + + newsize = xlen; + + while ((d.len + xlen) > newsize) + newsize *= 2; + + nd.val = xrealloc(d.val, newsize); + + return nd; +} + +struct data data_copy_mem(const char *mem, int len) +{ + struct data d; + + d = data_grow_for(empty_data, len); + + d.len = len; + memcpy(d.val, mem, len); + + return d; +} + +static char get_oct_char(const char *s, int *i) +{ + char x[4]; + char *endx; + long val; + + x[3] = '\0'; + strncpy(x, s + *i, 3); + + val = strtol(x, &endx, 8); + + assert(endx > x); + + (*i) += endx - x; + return val; +} + +static char get_hex_char(const char *s, int *i) +{ + char x[3]; + char *endx; + long val; + + x[2] = '\0'; + strncpy(x, s + *i, 2); + + val = strtol(x, &endx, 16); + if (!(endx > x)) + die("\\x used with no following hex digits\n"); + + (*i) += endx - x; + return val; +} + +struct data data_copy_escape_string(const char *s, int len) +{ + int i = 0; + struct data d; + char *q; + + d = data_grow_for(empty_data, strlen(s)+1); + + q = d.val; + while (i < len) { + char c = s[i++]; + + if (c != '\\') { + q[d.len++] = c; + continue; + } + + c = s[i++]; + assert(c); + switch (c) { + case 'a': + q[d.len++] = '\a'; + break; + case 'b': + q[d.len++] = '\b'; + break; + case 't': + q[d.len++] = '\t'; + break; + case 'n': + q[d.len++] = '\n'; + break; + case 'v': + q[d.len++] = '\v'; + break; + case 'f': + q[d.len++] = '\f'; + break; + case 'r': + q[d.len++] = '\r'; + break; + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + i--; /* need to re-read the first digit as + * part of the octal value */ + q[d.len++] = get_oct_char(s, &i); + break; + case 'x': + q[d.len++] = get_hex_char(s, &i); + break; + default: + q[d.len++] = c; + } + } + + q[d.len++] = '\0'; + return d; +} + +struct data data_copy_file(FILE *f, size_t maxlen) +{ + struct data d = empty_data; + + while (!feof(f) && (d.len < maxlen)) { + size_t chunksize, ret; + + if (maxlen == -1) + chunksize = 4096; + else + chunksize = maxlen - d.len; + + d = data_grow_for(d, chunksize); + ret = fread(d.val + d.len, 1, chunksize, f); + + if (ferror(f)) + die("Error reading file into data: %s", strerror(errno)); + + if (d.len + ret < d.len) + die("Overflow reading file into data\n"); + + d.len += ret; + } + + return d; +} + +struct data data_append_data(struct data d, const void *p, int len) +{ + d = data_grow_for(d, len); + memcpy(d.val + d.len, p, len); + d.len += len; + return d; +} + +struct data data_insert_at_marker(struct data d, struct marker *m, + const void *p, int len) +{ + d = data_grow_for(d, len); + memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset); + memcpy(d.val + m->offset, p, len); + d.len += len; + + /* Adjust all markers after the one we're inserting at */ + m = m->next; + for_each_marker(m) + m->offset += len; + return d; +} + +struct data data_append_markers(struct data d, struct marker *m) +{ + struct marker **mp = &d.markers; + + /* Find the end of the markerlist */ + while (*mp) + mp = &((*mp)->next); + *mp = m; + return d; +} + +struct data data_merge(struct data d1, struct data d2) +{ + struct data d; + struct marker *m2 = d2.markers; + + d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2); + + /* Adjust for the length of d1 */ + for_each_marker(m2) + m2->offset += d1.len; + + d2.markers = NULL; /* So data_free() doesn't clobber them */ + data_free(d2); + + return d; +} + +struct data data_append_cell(struct data d, cell_t word) +{ + cell_t beword = cpu_to_fdt32(word); + + return data_append_data(d, &beword, sizeof(beword)); +} + +struct data data_append_re(struct data d, const struct fdt_reserve_entry *re) +{ + struct fdt_reserve_entry bere; + + bere.address = cpu_to_fdt64(re->address); + bere.size = cpu_to_fdt64(re->size); + + return data_append_data(d, &bere, sizeof(bere)); +} + +struct data data_append_addr(struct data d, uint64_t addr) +{ + uint64_t beaddr = cpu_to_fdt64(addr); + + return data_append_data(d, &beaddr, sizeof(beaddr)); +} + +struct data data_append_byte(struct data d, uint8_t byte) +{ + return data_append_data(d, &byte, 1); +} + +struct data data_append_zeroes(struct data d, int len) +{ + d = data_grow_for(d, len); + + memset(d.val + d.len, 0, len); + d.len += len; + return d; +} + +struct data data_append_align(struct data d, int align) +{ + int newlen = ALIGN(d.len, align); + return data_append_zeroes(d, newlen - d.len); +} + +struct data data_add_marker(struct data d, enum markertype type, char *ref) +{ + struct marker *m; + + m = xmalloc(sizeof(*m)); + m->offset = d.len; + m->type = type; + m->ref = ref; + m->next = NULL; + + return data_append_markers(d, m); +} + +int data_is_one_string(struct data d) +{ + int i; + int len = d.len; + + if (len == 0) + return 0; + + for (i = 0; i < len-1; i++) + if (d.val[i] == '\0') + return 0; + + if (d.val[len-1] != '\0') + return 0; + + return 1; +} diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l new file mode 100644 index 0000000..44dbfd3 --- /dev/null +++ b/scripts/dtc/dtc-lexer.l @@ -0,0 +1,320 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +%option noyywrap nounput yylineno + +%x INCLUDE +%x BYTESTRING +%x PROPNODENAME +%s V1 + +PROPNODECHAR [a-zA-Z0-9,._+*#?@-] +PATHCHAR ({PROPNODECHAR}|[/]) +LABEL [a-zA-Z_][a-zA-Z0-9_]* +STRING \"([^\\"]|\\.)*\" +WS [[:space:]] +COMMENT "/*"([^*]|\*+[^*/])*\*+"/" +LINECOMMENT "//".*\n + +%{ +#include "dtc.h" +#include "srcpos.h" +#include "dtc-parser.tab.h" + + +/*#define LEXDEBUG 1*/ + +#ifdef LEXDEBUG +#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) +#else +#define DPRINT(fmt, ...) do { } while (0) +#endif + +static int dts_version; /* = 0 */ + +#define BEGIN_DEFAULT() if (dts_version == 0) { \ + DPRINT("\n"); \ + BEGIN(INITIAL); \ + } else { \ + DPRINT("\n"); \ + BEGIN(V1); \ + } + +static void push_input_file(const char *filename); +static int pop_input_file(void); +%} + +%% +<*>"/include/"{WS}*{STRING} { + char *name = strchr(yytext, '\"') + 1; + yytext[yyleng-1] = '\0'; + push_input_file(name); + } + +<*><> { + if (!pop_input_file()) { + yyterminate(); + } + } + +<*>{STRING} { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, + yyleng-2); + yylloc.first_line = yylineno; + return DT_STRING; + } + +<*>"/dts-v1/" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; + BEGIN_DEFAULT(); + return DT_V1; + } + +<*>"/memreserve/" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + +<*>{LABEL}: { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Label: %s\n", yytext); + yylval.labelref = strdup(yytext); + yylval.labelref[yyleng-1] = '\0'; + return DT_LABEL; + } + +[bodh]# { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + if (*yytext == 'b') + yylval.cbase = 2; + else if (*yytext == 'o') + yylval.cbase = 8; + else if (*yytext == 'd') + yylval.cbase = 10; + else + yylval.cbase = 16; + DPRINT("Base: %d\n", yylval.cbase); + return DT_BASE; + } + +[0-9a-fA-F]+ { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LEGACYLITERAL; + } + +[0-9]+|0[xX][0-9a-fA-F]+ { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LITERAL; + } + +\&{LABEL} { /* label reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + +"&{/"{PATHCHAR}+\} { /* new-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); + yylval.labelref = strdup(yytext+2); + return DT_REF; + } + +"&/"{PATHCHAR}+ { /* old-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + +[0-9a-fA-F]{2} { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + +"]" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + +{PROPNODECHAR}+ { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = strdup(yytext); + BEGIN_DEFAULT(); + return DT_PROPNODENAME; + } + +"/incbin/" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Binary Include\n"); + return DT_INCBIN; + } + +<*>{WS}+ /* eat whitespace */ +<*>{COMMENT}+ /* eat C-style comments */ +<*>{LINECOMMENT}+ /* eat C++-style comments */ + +<*>. { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); + if (yytext[0] == '[') { + DPRINT("\n"); + BEGIN(BYTESTRING); + } + if ((yytext[0] == '{') + || (yytext[0] == ';')) { + DPRINT("\n"); + BEGIN(PROPNODENAME); + } + return yytext[0]; + } + +%% + + +/* + * Stack of nested include file contexts. + */ + +struct incl_file { + struct dtc_file *file; + YY_BUFFER_STATE yy_prev_buf; + int yy_prev_lineno; + struct incl_file *prev; +}; + +static struct incl_file *incl_file_stack; + + +/* + * Detect infinite include recursion. + */ +#define MAX_INCLUDE_DEPTH (100) + +static int incl_depth = 0; + + +static void push_input_file(const char *filename) +{ + struct incl_file *incl_file; + struct dtc_file *newfile; + struct search_path search, *searchptr = NULL; + + assert(filename); + + if (incl_depth++ >= MAX_INCLUDE_DEPTH) + die("Includes nested too deeply"); + + if (srcpos_file) { + search.dir = srcpos_file->dir; + search.next = NULL; + search.prev = NULL; + searchptr = &search; + } + + newfile = dtc_open_file(filename, searchptr); + + incl_file = xmalloc(sizeof(struct incl_file)); + + /* + * Save current context. + */ + incl_file->yy_prev_buf = YY_CURRENT_BUFFER; + incl_file->yy_prev_lineno = yylineno; + incl_file->file = srcpos_file; + incl_file->prev = incl_file_stack; + + incl_file_stack = incl_file; + + /* + * Establish new context. + */ + srcpos_file = newfile; + yylineno = 1; + yyin = newfile->file; + yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); +} + + +static int pop_input_file(void) +{ + struct incl_file *incl_file; + + if (incl_file_stack == 0) + return 0; + + dtc_close_file(srcpos_file); + + /* + * Pop. + */ + --incl_depth; + incl_file = incl_file_stack; + incl_file_stack = incl_file->prev; + + /* + * Recover old context. + */ + yy_delete_buffer(YY_CURRENT_BUFFER); + yy_switch_to_buffer(incl_file->yy_prev_buf); + yylineno = incl_file->yy_prev_lineno; + srcpos_file = incl_file->file; + yyin = incl_file->file ? incl_file->file->file : NULL; + + /* + * Free old state. + */ + free(incl_file); + + return 1; +} diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped new file mode 100644 index 0000000..ac392cb --- /dev/null +++ b/scripts/dtc/dtc-lexer.lex.c_shipped @@ -0,0 +1,2187 @@ +#line 2 "dtc-lexer.lex.c" + +#line 4 "dtc-lexer.lex.c" + +#define YY_INT_ALIGNED short int + +/* A lexical scanner generated by flex */ + +#define FLEX_SCANNER +#define YY_FLEX_MAJOR_VERSION 2 +#define YY_FLEX_MINOR_VERSION 5 +#define YY_FLEX_SUBMINOR_VERSION 34 +#if YY_FLEX_SUBMINOR_VERSION > 0 +#define FLEX_BETA +#endif + +/* First, we deal with platform-specific or compiler-specific issues. */ + +/* begin standard C headers. */ +#include +#include +#include +#include + +/* end standard C headers. */ + +/* flex integer type definitions */ + +#ifndef FLEXINT_H +#define FLEXINT_H + +/* C99 systems have . Non-C99 systems may or may not. */ + +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + +/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, + * if you want the limit (max/min) macros for int types. + */ +#ifndef __STDC_LIMIT_MACROS +#define __STDC_LIMIT_MACROS 1 +#endif + +#include +typedef int8_t flex_int8_t; +typedef uint8_t flex_uint8_t; +typedef int16_t flex_int16_t; +typedef uint16_t flex_uint16_t; +typedef int32_t flex_int32_t; +typedef uint32_t flex_uint32_t; +#else +typedef signed char flex_int8_t; +typedef short int flex_int16_t; +typedef int flex_int32_t; +typedef unsigned char flex_uint8_t; +typedef unsigned short int flex_uint16_t; +typedef unsigned int flex_uint32_t; +#endif /* ! C99 */ + +/* Limits of integral types. */ +#ifndef INT8_MIN +#define INT8_MIN (-128) +#endif +#ifndef INT16_MIN +#define INT16_MIN (-32767-1) +#endif +#ifndef INT32_MIN +#define INT32_MIN (-2147483647-1) +#endif +#ifndef INT8_MAX +#define INT8_MAX (127) +#endif +#ifndef INT16_MAX +#define INT16_MAX (32767) +#endif +#ifndef INT32_MAX +#define INT32_MAX (2147483647) +#endif +#ifndef UINT8_MAX +#define UINT8_MAX (255U) +#endif +#ifndef UINT16_MAX +#define UINT16_MAX (65535U) +#endif +#ifndef UINT32_MAX +#define UINT32_MAX (4294967295U) +#endif + +#endif /* ! FLEXINT_H */ + +#ifdef __cplusplus + +/* The "const" storage-class-modifier is valid. */ +#define YY_USE_CONST + +#else /* ! __cplusplus */ + +/* C99 requires __STDC__ to be defined as 1. */ +#if defined (__STDC__) + +#define YY_USE_CONST + +#endif /* defined (__STDC__) */ +#endif /* ! __cplusplus */ + +#ifdef YY_USE_CONST +#define yyconst const +#else +#define yyconst +#endif + +/* Returned upon end-of-file. */ +#define YY_NULL 0 + +/* Promotes a possibly negative, possibly signed char to an unsigned + * integer for use as an array index. If the signed char is negative, + * we want to instead treat it as an 8-bit unsigned char, hence the + * double cast. + */ +#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) + +/* Enter a start condition. This macro really ought to take a parameter, + * but we do it the disgusting crufty way forced on us by the ()-less + * definition of BEGIN. + */ +#define BEGIN (yy_start) = 1 + 2 * + +/* Translate the current start state into a value that can be later handed + * to BEGIN to return to the state. The YYSTATE alias is for lex + * compatibility. + */ +#define YY_START (((yy_start) - 1) / 2) +#define YYSTATE YY_START + +/* Action number for EOF rule of a given start state. */ +#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) + +/* Special action meaning "start processing a new file". */ +#define YY_NEW_FILE yyrestart(yyin ) + +#define YY_END_OF_BUFFER_CHAR 0 + +/* Size of default input buffer. */ +#ifndef YY_BUF_SIZE +#define YY_BUF_SIZE 16384 +#endif + +/* The state buf must be large enough to hold one state per character in the main buffer. + */ +#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) + +#ifndef YY_TYPEDEF_YY_BUFFER_STATE +#define YY_TYPEDEF_YY_BUFFER_STATE +typedef struct yy_buffer_state *YY_BUFFER_STATE; +#endif + +extern int yyleng; + +extern FILE *yyin, *yyout; + +#define EOB_ACT_CONTINUE_SCAN 0 +#define EOB_ACT_END_OF_FILE 1 +#define EOB_ACT_LAST_MATCH 2 + + /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires + * access to the local variable yy_act. Since yyless() is a macro, it would break + * existing scanners that call yyless() from OUTSIDE yylex. + * One obvious solution it to make yy_act a global. I tried that, and saw + * a 5% performance hit in a non-yylineno scanner, because yy_act is + * normally declared as a register variable-- so it is not worth it. + */ + #define YY_LESS_LINENO(n) \ + do { \ + int yyl;\ + for ( yyl = n; yyl < yyleng; ++yyl )\ + if ( yytext[yyl] == '\n' )\ + --yylineno;\ + }while(0) + +/* Return all but the first "n" matched characters back to the input stream. */ +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + *yy_cp = (yy_hold_char); \ + YY_RESTORE_YY_MORE_OFFSET \ + (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ + YY_DO_BEFORE_ACTION; /* set up yytext again */ \ + } \ + while ( 0 ) + +#define unput(c) yyunput( c, (yytext_ptr) ) + +/* The following is because we cannot portably get our hands on size_t + * (without autoconf's help, which isn't available because we want + * flex-generated scanners to compile on their own). + * Given that the standard has decreed that size_t exists since 1989, + * I guess we can afford to depend on it. Manoj. + */ + +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef size_t yy_size_t; +#endif + +#ifndef YY_STRUCT_YY_BUFFER_STATE +#define YY_STRUCT_YY_BUFFER_STATE +struct yy_buffer_state + { + FILE *yy_input_file; + + char *yy_ch_buf; /* input buffer */ + char *yy_buf_pos; /* current position in input buffer */ + + /* Size of input buffer in bytes, not including room for EOB + * characters. + */ + yy_size_t yy_buf_size; + + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ + int yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to + * delete it. + */ + int yy_is_our_buffer; + + /* Whether this is an "interactive" input source; if so, and + * if we're using stdio for input, then we want to use getc() + * instead of fread(), to make sure we stop fetching input after + * each newline. + */ + int yy_is_interactive; + + /* Whether we're considered to be at the beginning of a line. + * If so, '^' rules will be active on the next match, otherwise + * not. + */ + int yy_at_bol; + + int yy_bs_lineno; /**< The line count. */ + int yy_bs_column; /**< The column count. */ + + /* Whether to try to fill the input buffer when we reach the + * end of it. + */ + int yy_fill_buffer; + + int yy_buffer_status; + +#define YY_BUFFER_NEW 0 +#define YY_BUFFER_NORMAL 1 + /* When an EOF's been seen but there's still some text to process + * then we mark the buffer as YY_EOF_PENDING, to indicate that we + * shouldn't try reading from the input source any more. We might + * still have a bunch of tokens to match, though, because of + * possible backing-up. + * + * When we actually see the EOF, we change the status to "new" + * (via yyrestart()), so that the user can continue scanning by + * just pointing yyin at a new input file. + */ +#define YY_BUFFER_EOF_PENDING 2 + + }; +#endif /* !YY_STRUCT_YY_BUFFER_STATE */ + +/* Stack of input buffers. */ +static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ +static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ +static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ + +/* We provide macros for accessing buffer states in case in the + * future we want to put the buffer states in a more general + * "scanner state". + * + * Returns the top of the stack, or NULL. + */ +#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ + ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ + : NULL) + +/* Same as previous macro, but useful when we know that the buffer stack is not + * NULL or when we need an lvalue. For internal use only. + */ +#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] + +/* yy_hold_char holds the character lost when yytext is formed. */ +static char yy_hold_char; +static int yy_n_chars; /* number of characters read into yy_ch_buf */ +int yyleng; + +/* Points to current character in buffer. */ +static char *yy_c_buf_p = (char *) 0; +static int yy_init = 0; /* whether we need to initialize */ +static int yy_start = 0; /* start state number */ + +/* Flag which is used to allow yywrap()'s to do buffer switches + * instead of setting up a fresh yyin. A bit of a hack ... + */ +static int yy_did_buffer_switch_on_eof; + +void yyrestart (FILE *input_file ); +void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); +YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); +void yy_delete_buffer (YY_BUFFER_STATE b ); +void yy_flush_buffer (YY_BUFFER_STATE b ); +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); +void yypop_buffer_state (void ); + +static void yyensure_buffer_stack (void ); +static void yy_load_buffer_state (void ); +static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); + +#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) + +YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); +YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); + +void *yyalloc (yy_size_t ); +void *yyrealloc (void *,yy_size_t ); +void yyfree (void * ); + +#define yy_new_buffer yy_create_buffer + +#define yy_set_interactive(is_interactive) \ + { \ + if ( ! YY_CURRENT_BUFFER ){ \ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ + } + +#define yy_set_bol(at_bol) \ + { \ + if ( ! YY_CURRENT_BUFFER ){\ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ + } + +#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) + +/* Begin user sect3 */ + +#define yywrap(n) 1 +#define YY_SKIP_YYWRAP + +typedef unsigned char YY_CHAR; + +FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; + +typedef int yy_state_type; + +extern int yylineno; + +int yylineno = 1; + +extern char *yytext; +#define yytext_ptr yytext + +static yy_state_type yy_get_previous_state (void ); +static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); +static int yy_get_next_buffer (void ); +static void yy_fatal_error (yyconst char msg[] ); + +/* Done after the current pattern has been matched and before the + * corresponding action - sets up yytext. + */ +#define YY_DO_BEFORE_ACTION \ + (yytext_ptr) = yy_bp; \ + yyleng = (size_t) (yy_cp - yy_bp); \ + (yy_hold_char) = *yy_cp; \ + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +#define YY_NUM_RULES 20 +#define YY_END_OF_BUFFER 21 +/* This struct is not used in this scanner, + but its presence is necessary. */ +struct yy_trans_info + { + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +static yyconst flex_int16_t yy_accept[104] = + { 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 21, 19, 16, 16, 19, 19, 19, 7, 7, 19, + 7, 19, 19, 19, 19, 13, 14, 14, 19, 8, + 8, 16, 0, 2, 0, 0, 9, 0, 0, 0, + 0, 0, 0, 7, 7, 5, 0, 6, 0, 12, + 12, 14, 14, 8, 0, 11, 9, 0, 0, 0, + 0, 18, 0, 0, 0, 0, 8, 0, 17, 0, + 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 3, 15, + 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, + + 0, 4, 0 + } ; + +static yyconst flex_int32_t yy_ec[256] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, + 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 2, 1, 4, 5, 1, 1, 6, 1, 1, + 1, 7, 8, 8, 9, 8, 10, 11, 12, 13, + 13, 13, 13, 13, 13, 13, 13, 14, 1, 1, + 1, 1, 8, 8, 15, 15, 15, 15, 15, 15, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 17, 16, 16, + 1, 18, 19, 1, 16, 1, 15, 20, 21, 22, + + 23, 15, 16, 24, 25, 16, 16, 26, 27, 28, + 24, 16, 16, 29, 30, 31, 32, 33, 16, 17, + 16, 16, 34, 1, 35, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1 + } ; + +static yyconst flex_int32_t yy_meta[36] = + { 0, + 1, 1, 1, 1, 2, 1, 2, 2, 2, 3, + 4, 4, 4, 5, 6, 7, 7, 1, 1, 6, + 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 8, 1 + } ; + +static yyconst flex_int16_t yy_base[117] = + { 0, + 0, 0, 30, 0, 44, 0, 67, 0, 97, 105, + 302, 303, 35, 44, 40, 94, 112, 0, 129, 152, + 296, 295, 159, 0, 176, 303, 0, 116, 95, 165, + 49, 46, 102, 303, 296, 0, 0, 288, 290, 293, + 264, 266, 270, 0, 0, 303, 0, 303, 264, 303, + 0, 0, 195, 101, 0, 0, 0, 0, 284, 125, + 277, 265, 225, 230, 216, 218, 0, 202, 224, 221, + 217, 107, 196, 188, 303, 206, 179, 186, 178, 185, + 183, 162, 161, 150, 169, 160, 145, 125, 303, 303, + 137, 109, 190, 103, 203, 167, 108, 197, 303, 123, + + 29, 303, 303, 215, 221, 226, 229, 234, 240, 246, + 250, 257, 265, 270, 275, 282 + } ; + +static yyconst flex_int16_t yy_def[117] = + { 0, + 103, 1, 1, 3, 3, 5, 103, 7, 3, 3, + 103, 103, 103, 103, 104, 105, 103, 106, 103, 19, + 19, 20, 103, 107, 20, 103, 108, 109, 105, 103, + 103, 103, 104, 103, 104, 110, 111, 103, 112, 113, + 103, 103, 103, 106, 19, 103, 20, 103, 103, 103, + 20, 108, 109, 103, 114, 110, 111, 115, 112, 112, + 113, 103, 103, 103, 103, 103, 114, 115, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 116, 103, 116, 103, 116, + + 103, 103, 0, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103 + } ; + +static yyconst flex_int16_t yy_nxt[339] = + { 0, + 12, 13, 14, 15, 12, 16, 12, 12, 12, 17, + 18, 18, 18, 12, 19, 20, 20, 12, 12, 21, + 19, 21, 19, 22, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 12, 12, 12, 32, 32, 102, 23, + 12, 12, 12, 34, 20, 32, 32, 32, 32, 20, + 20, 20, 20, 20, 24, 24, 24, 35, 25, 54, + 54, 54, 26, 25, 25, 25, 25, 12, 13, 14, + 15, 27, 12, 27, 27, 27, 23, 27, 27, 27, + 12, 28, 28, 28, 12, 12, 28, 28, 28, 28, + 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, + + 12, 12, 29, 36, 103, 34, 17, 30, 31, 31, + 29, 54, 54, 54, 17, 30, 31, 31, 39, 35, + 52, 40, 52, 52, 52, 103, 78, 38, 38, 46, + 101, 60, 79, 41, 69, 97, 42, 94, 43, 45, + 45, 45, 46, 45, 47, 47, 93, 92, 45, 45, + 45, 45, 47, 47, 47, 47, 47, 47, 47, 47, + 47, 47, 47, 47, 47, 39, 47, 91, 40, 90, + 99, 47, 47, 47, 47, 54, 54, 54, 89, 88, + 41, 55, 87, 49, 100, 43, 51, 51, 51, 86, + 51, 95, 95, 96, 85, 51, 51, 51, 51, 52, + + 99, 52, 52, 52, 95, 95, 96, 84, 46, 83, + 82, 81, 39, 79, 100, 33, 33, 33, 33, 33, + 33, 33, 33, 37, 80, 77, 37, 37, 37, 44, + 40, 44, 50, 76, 50, 52, 75, 52, 74, 52, + 52, 53, 73, 53, 53, 53, 53, 56, 56, 56, + 72, 56, 56, 57, 71, 57, 57, 59, 59, 59, + 59, 59, 59, 59, 59, 61, 61, 61, 61, 61, + 61, 61, 61, 67, 70, 67, 68, 68, 68, 62, + 68, 68, 98, 98, 98, 98, 98, 98, 98, 98, + 60, 66, 65, 64, 63, 62, 60, 58, 103, 48, + + 48, 103, 11, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103 + } ; + +static yyconst flex_int16_t yy_chk[339] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 3, 13, 13, 101, 3, + 3, 3, 3, 15, 3, 14, 14, 32, 32, 3, + 3, 3, 3, 3, 5, 5, 5, 15, 5, 31, + 31, 31, 5, 5, 5, 5, 5, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + + 7, 7, 9, 16, 29, 33, 9, 9, 9, 9, + 10, 54, 54, 54, 10, 10, 10, 10, 17, 33, + 28, 17, 28, 28, 28, 100, 72, 16, 29, 28, + 97, 60, 72, 17, 60, 94, 17, 92, 17, 19, + 19, 19, 19, 19, 19, 19, 91, 88, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 20, 20, 20, 23, 20, 87, 23, 86, + 96, 20, 20, 20, 20, 30, 30, 30, 85, 84, + 23, 30, 83, 23, 96, 23, 25, 25, 25, 82, + 25, 93, 93, 93, 81, 25, 25, 25, 25, 53, + + 98, 53, 53, 53, 95, 95, 95, 80, 53, 79, + 78, 77, 76, 74, 98, 104, 104, 104, 104, 104, + 104, 104, 104, 105, 73, 71, 105, 105, 105, 106, + 70, 106, 107, 69, 107, 108, 68, 108, 66, 108, + 108, 109, 65, 109, 109, 109, 109, 110, 110, 110, + 64, 110, 110, 111, 63, 111, 111, 112, 112, 112, + 112, 112, 112, 112, 112, 113, 113, 113, 113, 113, + 113, 113, 113, 114, 62, 114, 115, 115, 115, 61, + 115, 115, 116, 116, 116, 116, 116, 116, 116, 116, + 59, 49, 43, 42, 41, 40, 39, 38, 35, 22, + + 21, 11, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103 + } ; + +/* Table of booleans, true if rule could match eol. */ +static yyconst flex_int32_t yy_rule_can_match_eol[21] = + { 0, +1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, + 0, }; + +static yy_state_type yy_last_accepting_state; +static char *yy_last_accepting_cpos; + +extern int yy_flex_debug; +int yy_flex_debug = 0; + +/* The intent behind this definition is that it'll catch + * any uses of REJECT which flex missed. + */ +#define REJECT reject_used_but_not_detected +#define yymore() yymore_used_but_not_detected +#define YY_MORE_ADJ 0 +#define YY_RESTORE_YY_MORE_OFFSET +char *yytext; +#line 1 "dtc-lexer.l" +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + + + + +#line 37 "dtc-lexer.l" +#include "dtc.h" +#include "srcpos.h" +#include "dtc-parser.tab.h" + + +/*#define LEXDEBUG 1*/ + +#ifdef LEXDEBUG +#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) +#else +#define DPRINT(fmt, ...) do { } while (0) +#endif + +static int dts_version; /* = 0 */ + +#define BEGIN_DEFAULT() if (dts_version == 0) { \ + DPRINT("\n"); \ + BEGIN(INITIAL); \ + } else { \ + DPRINT("\n"); \ + BEGIN(V1); \ + } + +static void push_input_file(const char *filename); +static int pop_input_file(void); +#line 638 "dtc-lexer.lex.c" + +#define INITIAL 0 +#define INCLUDE 1 +#define BYTESTRING 2 +#define PROPNODENAME 3 +#define V1 4 + +#ifndef YY_NO_UNISTD_H +/* Special case for "unistd.h", since it is non-ANSI. We include it way + * down here because we want the user's section 1 to have been scanned first. + * The user has a chance to override it with an option. + */ +#include +#endif + +#ifndef YY_EXTRA_TYPE +#define YY_EXTRA_TYPE void * +#endif + +static int yy_init_globals (void ); + +/* Macros after this point can all be overridden by user definitions in + * section 1. + */ + +#ifndef YY_SKIP_YYWRAP +#ifdef __cplusplus +extern "C" int yywrap (void ); +#else +extern int yywrap (void ); +#endif +#endif + +#ifndef yytext_ptr +static void yy_flex_strncpy (char *,yyconst char *,int ); +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * ); +#endif + +#ifndef YY_NO_INPUT + +#ifdef __cplusplus +static int yyinput (void ); +#else +static int input (void ); +#endif + +#endif + +/* Amount of stuff to slurp up with each read. */ +#ifndef YY_READ_BUF_SIZE +#define YY_READ_BUF_SIZE 8192 +#endif + +/* Copy whatever the last rule matched to the standard output. */ +#ifndef ECHO +/* This used to be an fputs(), but since the string might contain NUL's, + * we now use fwrite(). + */ +#define ECHO fwrite( yytext, yyleng, 1, yyout ) +#endif + +/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, + * is returned in "result". + */ +#ifndef YY_INPUT +#define YY_INPUT(buf,result,max_size) \ + if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ + { \ + int c = '*'; \ + int n; \ + for ( n = 0; n < max_size && \ + (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ + buf[n] = (char) c; \ + if ( c == '\n' ) \ + buf[n++] = (char) c; \ + if ( c == EOF && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + result = n; \ + } \ + else \ + { \ + errno=0; \ + while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ + { \ + if( errno != EINTR) \ + { \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + break; \ + } \ + errno=0; \ + clearerr(yyin); \ + } \ + }\ +\ + +#endif + +/* No semi-colon after return; correct usage is to write "yyterminate();" - + * we don't want an extra ';' after the "return" because that will cause + * some compilers to complain about unreachable statements. + */ +#ifndef yyterminate +#define yyterminate() return YY_NULL +#endif + +/* Number of entries by which start-condition stack grows. */ +#ifndef YY_START_STACK_INCR +#define YY_START_STACK_INCR 25 +#endif + +/* Report a fatal error. */ +#ifndef YY_FATAL_ERROR +#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) +#endif + +/* end tables serialization structures and prototypes */ + +/* Default declaration of generated scanner - a define so the user can + * easily add parameters. + */ +#ifndef YY_DECL +#define YY_DECL_IS_OURS 1 + +extern int yylex (void); + +#define YY_DECL int yylex (void) +#endif /* !YY_DECL */ + +/* Code executed at the beginning of each rule, after yytext and yyleng + * have been set up. + */ +#ifndef YY_USER_ACTION +#define YY_USER_ACTION +#endif + +/* Code executed at the end of each rule. */ +#ifndef YY_BREAK +#define YY_BREAK break; +#endif + +#define YY_RULE_SETUP \ + YY_USER_ACTION + +/** The main scanner function which does all the work. + */ +YY_DECL +{ + register yy_state_type yy_current_state; + register char *yy_cp, *yy_bp; + register int yy_act; + +#line 64 "dtc-lexer.l" + +#line 795 "dtc-lexer.lex.c" + + if ( !(yy_init) ) + { + (yy_init) = 1; + +#ifdef YY_USER_INIT + YY_USER_INIT; +#endif + + if ( ! (yy_start) ) + (yy_start) = 1; /* first start state */ + + if ( ! yyin ) + yyin = stdin; + + if ( ! yyout ) + yyout = stdout; + + if ( ! YY_CURRENT_BUFFER ) { + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_load_buffer_state( ); + } + + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); + + /* Support of yytext. */ + *yy_cp = (yy_hold_char); + + /* yy_bp points to the position in yy_ch_buf of the start of + * the current run. + */ + yy_bp = yy_cp; + + yy_current_state = (yy_start); +yy_match: + do + { + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 104 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } + while ( yy_base[yy_current_state] != 303 ); + +yy_find_action: + yy_act = yy_accept[yy_current_state]; + if ( yy_act == 0 ) + { /* have to back up */ + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + yy_act = yy_accept[yy_current_state]; + } + + YY_DO_BEFORE_ACTION; + + if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] ) + { + int yyl; + for ( yyl = 0; yyl < yyleng; ++yyl ) + if ( yytext[yyl] == '\n' ) + + yylineno++; +; + } + +do_action: /* This label is used only to access EOF actions. */ + + switch ( yy_act ) + { /* beginning of action switch */ + case 0: /* must back up */ + /* undo the effects of YY_DO_BEFORE_ACTION */ + *yy_cp = (yy_hold_char); + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + goto yy_find_action; + +case 1: +/* rule 1 can match eol */ +YY_RULE_SETUP +#line 65 "dtc-lexer.l" +{ + char *name = strchr(yytext, '\"') + 1; + yytext[yyleng-1] = '\0'; + push_input_file(name); + } + YY_BREAK +case YY_STATE_EOF(INITIAL): +case YY_STATE_EOF(INCLUDE): +case YY_STATE_EOF(BYTESTRING): +case YY_STATE_EOF(PROPNODENAME): +case YY_STATE_EOF(V1): +#line 71 "dtc-lexer.l" +{ + if (!pop_input_file()) { + yyterminate(); + } + } + YY_BREAK +case 2: +/* rule 2 can match eol */ +YY_RULE_SETUP +#line 77 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, + yyleng-2); + yylloc.first_line = yylineno; + return DT_STRING; + } + YY_BREAK +case 3: +YY_RULE_SETUP +#line 87 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; + BEGIN_DEFAULT(); + return DT_V1; + } + YY_BREAK +case 4: +YY_RULE_SETUP +#line 96 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + YY_BREAK +case 5: +YY_RULE_SETUP +#line 104 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Label: %s\n", yytext); + yylval.labelref = strdup(yytext); + yylval.labelref[yyleng-1] = '\0'; + return DT_LABEL; + } + YY_BREAK +case 6: +YY_RULE_SETUP +#line 113 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + if (*yytext == 'b') + yylval.cbase = 2; + else if (*yytext == 'o') + yylval.cbase = 8; + else if (*yytext == 'd') + yylval.cbase = 10; + else + yylval.cbase = 16; + DPRINT("Base: %d\n", yylval.cbase); + return DT_BASE; + } + YY_BREAK +case 7: +YY_RULE_SETUP +#line 128 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LEGACYLITERAL; + } + YY_BREAK +case 8: +YY_RULE_SETUP +#line 136 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LITERAL; + } + YY_BREAK +case 9: +YY_RULE_SETUP +#line 144 "dtc-lexer.l" +{ /* label reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + YY_BREAK +case 10: +YY_RULE_SETUP +#line 152 "dtc-lexer.l" +{ /* new-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); + yylval.labelref = strdup(yytext+2); + return DT_REF; + } + YY_BREAK +case 11: +YY_RULE_SETUP +#line 161 "dtc-lexer.l" +{ /* old-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + YY_BREAK +case 12: +YY_RULE_SETUP +#line 169 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + YY_BREAK +case 13: +YY_RULE_SETUP +#line 177 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + YY_BREAK +case 14: +YY_RULE_SETUP +#line 185 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = strdup(yytext); + BEGIN_DEFAULT(); + return DT_PROPNODENAME; + } + YY_BREAK +case 15: +YY_RULE_SETUP +#line 194 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Binary Include\n"); + return DT_INCBIN; + } + YY_BREAK +case 16: +/* rule 16 can match eol */ +YY_RULE_SETUP +#line 201 "dtc-lexer.l" +/* eat whitespace */ + YY_BREAK +case 17: +/* rule 17 can match eol */ +YY_RULE_SETUP +#line 202 "dtc-lexer.l" +/* eat C-style comments */ + YY_BREAK +case 18: +/* rule 18 can match eol */ +YY_RULE_SETUP +#line 203 "dtc-lexer.l" +/* eat C++-style comments */ + YY_BREAK +case 19: +YY_RULE_SETUP +#line 205 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); + if (yytext[0] == '[') { + DPRINT("\n"); + BEGIN(BYTESTRING); + } + if ((yytext[0] == '{') + || (yytext[0] == ';')) { + DPRINT("\n"); + BEGIN(PROPNODENAME); + } + return yytext[0]; + } + YY_BREAK +case 20: +YY_RULE_SETUP +#line 222 "dtc-lexer.l" +ECHO; + YY_BREAK +#line 1120 "dtc-lexer.lex.c" + + case YY_END_OF_BUFFER: + { + /* Amount of text matched not including the EOB char. */ + int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; + + /* Undo the effects of YY_DO_BEFORE_ACTION. */ + *yy_cp = (yy_hold_char); + YY_RESTORE_YY_MORE_OFFSET + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) + { + /* We're scanning a new file or input source. It's + * possible that this happened because the user + * just pointed yyin at a new source and called + * yylex(). If so, then we have to assure + * consistency between YY_CURRENT_BUFFER and our + * globals. Here is the right place to do so, because + * this is the first action (other than possibly a + * back-up) that will match for the new input source. + */ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; + } + + /* Note that here we test for yy_c_buf_p "<=" to the position + * of the first EOB in the buffer, since yy_c_buf_p will + * already have been incremented past the NUL character + * (since all states make transitions on EOB to the + * end-of-buffer state). Contrast this with the test + * in input(). + */ + if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + { /* This was really a NUL. */ + yy_state_type yy_next_state; + + (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + /* Okay, we're now positioned to make the NUL + * transition. We couldn't have + * yy_get_previous_state() go ahead and do it + * for us because it doesn't know how to deal + * with the possibility of jamming (and we don't + * want to build jamming into it because then it + * will run more slowly). + */ + + yy_next_state = yy_try_NUL_trans( yy_current_state ); + + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + + if ( yy_next_state ) + { + /* Consume the NUL. */ + yy_cp = ++(yy_c_buf_p); + yy_current_state = yy_next_state; + goto yy_match; + } + + else + { + yy_cp = (yy_c_buf_p); + goto yy_find_action; + } + } + + else switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_END_OF_FILE: + { + (yy_did_buffer_switch_on_eof) = 0; + + if ( yywrap( ) ) + { + /* Note: because we've taken care in + * yy_get_next_buffer() to have set up + * yytext, we can now set up + * yy_c_buf_p so that if some total + * hoser (like flex itself) wants to + * call the scanner after we return the + * YY_NULL, it'll still work - another + * YY_NULL will get returned. + */ + (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; + + yy_act = YY_STATE_EOF(YY_START); + goto do_action; + } + + else + { + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; + } + break; + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = + (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_match; + + case EOB_ACT_LAST_MATCH: + (yy_c_buf_p) = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_find_action; + } + break; + } + + default: + YY_FATAL_ERROR( + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ +} /* end of yylex */ + +/* yy_get_next_buffer - try to read in a new buffer + * + * Returns a code representing an action: + * EOB_ACT_LAST_MATCH - + * EOB_ACT_CONTINUE_SCAN - continue scanning from current position + * EOB_ACT_END_OF_FILE - end of file + */ +static int yy_get_next_buffer (void) +{ + register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; + register char *source = (yytext_ptr); + register int number_to_move, i; + int ret_val; + + if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) + YY_FATAL_ERROR( + "fatal flex scanner internal error--end of buffer missed" ); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) + { /* Don't try to fill the buffer, so this is an EOF. */ + if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) + { + /* We matched a single character, the EOB, so + * treat this as a final EOF. + */ + return EOB_ACT_END_OF_FILE; + } + + else + { + /* We matched some text prior to the EOB, first + * process it. + */ + return EOB_ACT_LAST_MATCH; + } + } + + /* Try to read more data. */ + + /* First move last chars to start of buffer. */ + number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; + + for ( i = 0; i < number_to_move; ++i ) + *(dest++) = *(source++); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) + /* don't do the read, it's not guaranteed to return an EOF, + * just force an EOF + */ + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; + + else + { + int num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + /* just a shorter name for the current buffer */ + YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + + int yy_c_buf_p_offset = + (int) ((yy_c_buf_p) - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { + int new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; + else + b->yy_buf_size *= 2; + + b->yy_ch_buf = (char *) + /* Include room in for 2 EOB chars. */ + yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); + } + else + /* Can't grow it, we don't own it. */ + b->yy_ch_buf = 0; + + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( + "fatal error - scanner input buffer overflow" ); + + (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; + + num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - + number_to_move - 1; + + } + + if ( num_to_read > YY_READ_BUF_SIZE ) + num_to_read = YY_READ_BUF_SIZE; + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), + (yy_n_chars), (size_t) num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + if ( (yy_n_chars) == 0 ) + { + if ( number_to_move == YY_MORE_ADJ ) + { + ret_val = EOB_ACT_END_OF_FILE; + yyrestart(yyin ); + } + + else + { + ret_val = EOB_ACT_LAST_MATCH; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = + YY_BUFFER_EOF_PENDING; + } + } + + else + ret_val = EOB_ACT_CONTINUE_SCAN; + + if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { + /* Extend the array by 50%, plus the number we really need. */ + yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); + if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); + } + + (yy_n_chars) += number_to_move; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; + + (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; + + return ret_val; +} + +/* yy_get_previous_state - get the state just before the EOB char was reached */ + + static yy_state_type yy_get_previous_state (void) +{ + register yy_state_type yy_current_state; + register char *yy_cp; + + yy_current_state = (yy_start); + + for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) + { + register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 104 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + } + + return yy_current_state; +} + +/* yy_try_NUL_trans - try to make a transition on the NUL character + * + * synopsis + * next_state = yy_try_NUL_trans( current_state ); + */ + static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) +{ + register int yy_is_jam; + register char *yy_cp = (yy_c_buf_p); + + register YY_CHAR yy_c = 1; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 104 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + yy_is_jam = (yy_current_state == 103); + + return yy_is_jam ? 0 : yy_current_state; +} + +#ifndef YY_NO_INPUT +#ifdef __cplusplus + static int yyinput (void) +#else + static int input (void) +#endif + +{ + int c; + + *(yy_c_buf_p) = (yy_hold_char); + + if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) + { + /* yy_c_buf_p now points to the character we want to return. + * If this occurs *before* the EOB characters, then it's a + * valid NUL; if not, then we've hit the end of the buffer. + */ + if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + /* This was really a NUL. */ + *(yy_c_buf_p) = '\0'; + + else + { /* need more input */ + int offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_LAST_MATCH: + /* This happens because yy_g_n_b() + * sees that we've accumulated a + * token and flags that we need to + * try matching the token before + * proceeding. But for input(), + * there's no matching to consider. + * So convert the EOB_ACT_LAST_MATCH + * to EOB_ACT_END_OF_FILE. + */ + + /* Reset buffer status. */ + yyrestart(yyin ); + + /*FALLTHROUGH*/ + + case EOB_ACT_END_OF_FILE: + { + if ( yywrap( ) ) + return EOF; + + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; +#ifdef __cplusplus + return yyinput(); +#else + return input(); +#endif + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = (yytext_ptr) + offset; + break; + } + } + } + + c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ + *(yy_c_buf_p) = '\0'; /* preserve yytext */ + (yy_hold_char) = *++(yy_c_buf_p); + + if ( c == '\n' ) + + yylineno++; +; + + return c; +} +#endif /* ifndef YY_NO_INPUT */ + +/** Immediately switch to a different input stream. + * @param input_file A readable stream. + * + * @note This function does not reset the start condition to @c INITIAL . + */ + void yyrestart (FILE * input_file ) +{ + + if ( ! YY_CURRENT_BUFFER ){ + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_init_buffer(YY_CURRENT_BUFFER,input_file ); + yy_load_buffer_state( ); +} + +/** Switch to a different input buffer. + * @param new_buffer The new input buffer. + * + */ + void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) +{ + + /* TODO. We should be able to replace this entire function body + * with + * yypop_buffer_state(); + * yypush_buffer_state(new_buffer); + */ + yyensure_buffer_stack (); + if ( YY_CURRENT_BUFFER == new_buffer ) + return; + + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + YY_CURRENT_BUFFER_LVALUE = new_buffer; + yy_load_buffer_state( ); + + /* We don't actually know whether we did this switch during + * EOF (yywrap()) processing, but the only time this flag + * is looked at is after yywrap() is called, so it's safe + * to go ahead and always set it. + */ + (yy_did_buffer_switch_on_eof) = 1; +} + +static void yy_load_buffer_state (void) +{ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; + yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; + (yy_hold_char) = *(yy_c_buf_p); +} + +/** Allocate and initialize an input buffer state. + * @param file A readable stream. + * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. + * + * @return the allocated buffer state. + */ + YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) +{ + YY_BUFFER_STATE b; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_buf_size = size; + + /* yy_ch_buf has to be 2 characters longer than the size given because + * we need to put in 2 end-of-buffer characters. + */ + b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_is_our_buffer = 1; + + yy_init_buffer(b,file ); + + return b; +} + +/** Destroy the buffer. + * @param b a buffer created with yy_create_buffer() + * + */ + void yy_delete_buffer (YY_BUFFER_STATE b ) +{ + + if ( ! b ) + return; + + if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ + YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; + + if ( b->yy_is_our_buffer ) + yyfree((void *) b->yy_ch_buf ); + + yyfree((void *) b ); +} + +#ifndef __cplusplus +extern int isatty (int ); +#endif /* __cplusplus */ + +/* Initializes or reinitializes a buffer. + * This function is sometimes called more than once on the same buffer, + * such as during a yyrestart() or at EOF. + */ + static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) + +{ + int oerrno = errno; + + yy_flush_buffer(b ); + + b->yy_input_file = file; + b->yy_fill_buffer = 1; + + /* If b is the current buffer, then yy_init_buffer was _probably_ + * called from yyrestart() or through yy_get_next_buffer. + * In that case, we don't want to reset the lineno or column. + */ + if (b != YY_CURRENT_BUFFER){ + b->yy_bs_lineno = 1; + b->yy_bs_column = 0; + } + + b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; + + errno = oerrno; +} + +/** Discard all buffered characters. On the next scan, YY_INPUT will be called. + * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. + * + */ + void yy_flush_buffer (YY_BUFFER_STATE b ) +{ + if ( ! b ) + return; + + b->yy_n_chars = 0; + + /* We always need two end-of-buffer characters. The first causes + * a transition to the end-of-buffer state. The second causes + * a jam in that state. + */ + b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; + b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; + + b->yy_buf_pos = &b->yy_ch_buf[0]; + + b->yy_at_bol = 1; + b->yy_buffer_status = YY_BUFFER_NEW; + + if ( b == YY_CURRENT_BUFFER ) + yy_load_buffer_state( ); +} + +/** Pushes the new state onto the stack. The new state becomes + * the current state. This function will allocate the stack + * if necessary. + * @param new_buffer The new state. + * + */ +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) +{ + if (new_buffer == NULL) + return; + + yyensure_buffer_stack(); + + /* This block is copied from yy_switch_to_buffer. */ + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + /* Only push if top exists. Otherwise, replace top. */ + if (YY_CURRENT_BUFFER) + (yy_buffer_stack_top)++; + YY_CURRENT_BUFFER_LVALUE = new_buffer; + + /* copied from yy_switch_to_buffer. */ + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; +} + +/** Removes and deletes the top of the stack, if present. + * The next element becomes the new top. + * + */ +void yypop_buffer_state (void) +{ + if (!YY_CURRENT_BUFFER) + return; + + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + if ((yy_buffer_stack_top) > 0) + --(yy_buffer_stack_top); + + if (YY_CURRENT_BUFFER) { + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; + } +} + +/* Allocates the stack if it does not exist. + * Guarantees space for at least one push. + */ +static void yyensure_buffer_stack (void) +{ + int num_to_alloc; + + if (!(yy_buffer_stack)) { + + /* First allocation is just for 2 elements, since we don't know if this + * scanner will even need a stack. We use 2 instead of 1 to avoid an + * immediate realloc on the next call. + */ + num_to_alloc = 1; + (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc + (num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); + + (yy_buffer_stack_max) = num_to_alloc; + (yy_buffer_stack_top) = 0; + return; + } + + if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ + + /* Increase the buffer to prepare for a possible push. */ + int grow_size = 8 /* arbitrary grow size */; + + num_to_alloc = (yy_buffer_stack_max) + grow_size; + (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc + ((yy_buffer_stack), + num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + /* zero only the new slots.*/ + memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); + (yy_buffer_stack_max) = num_to_alloc; + } +} + +/** Setup the input buffer state to scan directly from a user-specified character buffer. + * @param base the character buffer + * @param size the size in bytes of the character buffer + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) +{ + YY_BUFFER_STATE b; + + if ( size < 2 || + base[size-2] != YY_END_OF_BUFFER_CHAR || + base[size-1] != YY_END_OF_BUFFER_CHAR ) + /* They forgot to leave room for the EOB's. */ + return 0; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); + + b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ + b->yy_buf_pos = b->yy_ch_buf = base; + b->yy_is_our_buffer = 0; + b->yy_input_file = 0; + b->yy_n_chars = b->yy_buf_size; + b->yy_is_interactive = 0; + b->yy_at_bol = 1; + b->yy_fill_buffer = 0; + b->yy_buffer_status = YY_BUFFER_NEW; + + yy_switch_to_buffer(b ); + + return b; +} + +/** Setup the input buffer state to scan a string. The next call to yylex() will + * scan from a @e copy of @a str. + * @param yystr a NUL-terminated string to scan + * + * @return the newly allocated buffer state object. + * @note If you want to scan bytes that may contain NUL values, then use + * yy_scan_bytes() instead. + */ +YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) +{ + + return yy_scan_bytes(yystr,strlen(yystr) ); +} + +/** Setup the input buffer state to scan the given bytes. The next call to yylex() will + * scan from a @e copy of @a bytes. + * @param bytes the byte buffer to scan + * @param len the number of bytes in the buffer pointed to by @a bytes. + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) +{ + YY_BUFFER_STATE b; + char *buf; + yy_size_t n; + int i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; + buf = (char *) yyalloc(n ); + if ( ! buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); + + for ( i = 0; i < _yybytes_len; ++i ) + buf[i] = yybytes[i]; + + buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; + + b = yy_scan_buffer(buf,n ); + if ( ! b ) + YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); + + /* It's okay to grow etc. this buffer, and we should throw it + * away when we're done. + */ + b->yy_is_our_buffer = 1; + + return b; +} + +#ifndef YY_EXIT_FAILURE +#define YY_EXIT_FAILURE 2 +#endif + +static void yy_fatal_error (yyconst char* msg ) +{ + (void) fprintf( stderr, "%s\n", msg ); + exit( YY_EXIT_FAILURE ); +} + +/* Redefine yyless() so it works in section 3 code. */ + +#undef yyless +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + yytext[yyleng] = (yy_hold_char); \ + (yy_c_buf_p) = yytext + yyless_macro_arg; \ + (yy_hold_char) = *(yy_c_buf_p); \ + *(yy_c_buf_p) = '\0'; \ + yyleng = yyless_macro_arg; \ + } \ + while ( 0 ) + +/* Accessor methods (get/set functions) to struct members. */ + +/** Get the current line number. + * + */ +int yyget_lineno (void) +{ + + return yylineno; +} + +/** Get the input stream. + * + */ +FILE *yyget_in (void) +{ + return yyin; +} + +/** Get the output stream. + * + */ +FILE *yyget_out (void) +{ + return yyout; +} + +/** Get the length of the current token. + * + */ +int yyget_leng (void) +{ + return yyleng; +} + +/** Get the current token. + * + */ + +char *yyget_text (void) +{ + return yytext; +} + +/** Set the current line number. + * @param line_number + * + */ +void yyset_lineno (int line_number ) +{ + + yylineno = line_number; +} + +/** Set the input stream. This does not discard the current + * input buffer. + * @param in_str A readable stream. + * + * @see yy_switch_to_buffer + */ +void yyset_in (FILE * in_str ) +{ + yyin = in_str ; +} + +void yyset_out (FILE * out_str ) +{ + yyout = out_str ; +} + +int yyget_debug (void) +{ + return yy_flex_debug; +} + +void yyset_debug (int bdebug ) +{ + yy_flex_debug = bdebug ; +} + +static int yy_init_globals (void) +{ + /* Initialization is the same as for the non-reentrant scanner. + * This function is called from yylex_destroy(), so don't allocate here. + */ + + /* We do not touch yylineno unless the option is enabled. */ + yylineno = 1; + + (yy_buffer_stack) = 0; + (yy_buffer_stack_top) = 0; + (yy_buffer_stack_max) = 0; + (yy_c_buf_p) = (char *) 0; + (yy_init) = 0; + (yy_start) = 0; + +/* Defined in main.c */ +#ifdef YY_STDINIT + yyin = stdin; + yyout = stdout; +#else + yyin = (FILE *) 0; + yyout = (FILE *) 0; +#endif + + /* For future reference: Set errno on error, since we are called by + * yylex_init() + */ + return 0; +} + +/* yylex_destroy is for both reentrant and non-reentrant scanners. */ +int yylex_destroy (void) +{ + + /* Pop the buffer stack, destroying each element. */ + while(YY_CURRENT_BUFFER){ + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + yypop_buffer_state(); + } + + /* Destroy the stack itself. */ + yyfree((yy_buffer_stack) ); + (yy_buffer_stack) = NULL; + + /* Reset the globals. This is important in a non-reentrant scanner so the next time + * yylex() is called, initialization will occur. */ + yy_init_globals( ); + + return 0; +} + +/* + * Internal utility routines. + */ + +#ifndef yytext_ptr +static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) +{ + register int i; + for ( i = 0; i < n; ++i ) + s1[i] = s2[i]; +} +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * s ) +{ + register int n; + for ( n = 0; s[n]; ++n ) + ; + + return n; +} +#endif + +void *yyalloc (yy_size_t size ) +{ + return (void *) malloc( size ); +} + +void *yyrealloc (void * ptr, yy_size_t size ) +{ + /* The cast to (char *) in the following accommodates both + * implementations that use char* generic pointers, and those + * that use void* generic pointers. It works with the latter + * because both ANSI C and C++ allow castless assignment from + * any pointer type to void*, and deal with argument conversions + * as though doing an assignment. + */ + return (void *) realloc( (char *) ptr, size ); +} + +void yyfree (void * ptr ) +{ + free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ +} + +#define YYTABLES_NAME "yytables" + +#line 222 "dtc-lexer.l" + + + + +/* + * Stack of nested include file contexts. + */ + +struct incl_file { + struct dtc_file *file; + YY_BUFFER_STATE yy_prev_buf; + int yy_prev_lineno; + struct incl_file *prev; +}; + +static struct incl_file *incl_file_stack; + + +/* + * Detect infinite include recursion. + */ +#define MAX_INCLUDE_DEPTH (100) + +static int incl_depth = 0; + + +static void push_input_file(const char *filename) +{ + struct incl_file *incl_file; + struct dtc_file *newfile; + struct search_path search, *searchptr = NULL; + + assert(filename); + + if (incl_depth++ >= MAX_INCLUDE_DEPTH) + die("Includes nested too deeply"); + + if (srcpos_file) { + search.dir = srcpos_file->dir; + search.next = NULL; + search.prev = NULL; + searchptr = &search; + } + + newfile = dtc_open_file(filename, searchptr); + + incl_file = xmalloc(sizeof(struct incl_file)); + + /* + * Save current context. + */ + incl_file->yy_prev_buf = YY_CURRENT_BUFFER; + incl_file->yy_prev_lineno = yylineno; + incl_file->file = srcpos_file; + incl_file->prev = incl_file_stack; + + incl_file_stack = incl_file; + + /* + * Establish new context. + */ + srcpos_file = newfile; + yylineno = 1; + yyin = newfile->file; + yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); +} + + +static int pop_input_file(void) +{ + struct incl_file *incl_file; + + if (incl_file_stack == 0) + return 0; + + dtc_close_file(srcpos_file); + + /* + * Pop. + */ + --incl_depth; + incl_file = incl_file_stack; + incl_file_stack = incl_file->prev; + + /* + * Recover old context. + */ + yy_delete_buffer(YY_CURRENT_BUFFER); + yy_switch_to_buffer(incl_file->yy_prev_buf); + yylineno = incl_file->yy_prev_lineno; + srcpos_file = incl_file->file; + yyin = incl_file->file ? incl_file->file->file : NULL; + + /* + * Free old state. + */ + free(incl_file); + + return 1; +} + diff --git a/scripts/dtc/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped new file mode 100644 index 0000000..2712937 --- /dev/null +++ b/scripts/dtc/dtc-parser.tab.c_shipped @@ -0,0 +1,2040 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 1 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + DT_V1 = 258, + DT_MEMRESERVE = 259, + DT_PROPNODENAME = 260, + DT_LITERAL = 261, + DT_LEGACYLITERAL = 262, + DT_BASE = 263, + DT_BYTE = 264, + DT_STRING = 265, + DT_LABEL = 266, + DT_REF = 267, + DT_INCBIN = 268 + }; +#endif +/* Tokens. */ +#define DT_V1 258 +#define DT_MEMRESERVE 259 +#define DT_PROPNODENAME 260 +#define DT_LITERAL 261 +#define DT_LEGACYLITERAL 262 +#define DT_BASE 263 +#define DT_BYTE 264 +#define DT_STRING 265 +#define DT_LABEL 266 +#define DT_REF 267 +#define DT_INCBIN 268 + + + + +/* Copy the first part of user declarations. */ +#line 23 "dtc-parser.y" + +#include + +#include "dtc.h" +#include "srcpos.h" + +extern int yylex(void); + +extern struct boot_info *the_boot_info; +extern int treesource_error; + +static unsigned long long eval_literal(const char *s, int base, int bits); + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 37 "dtc-parser.y" +{ + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + uint8_t byte; + struct data data; + + uint64_t addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} +/* Line 187 of yacc.c. */ +#line 153 "dtc-parser.tab.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +} YYLTYPE; +# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 +#endif + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 178 "dtc-parser.tab.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if YYENABLE_NLS +# if ENABLE_NLS +# include /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \ + && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + YYLTYPE yyls; +}; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ + + 2 * YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 9 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 73 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 27 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 20 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 45 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 76 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 268 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 24, 26, 2, 2, 25, 15, 2, 16, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 14, + 20, 19, 21, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 22, 2, 23, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 17, 2, 18, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint8 yyprhs[] = +{ + 0, 0, 3, 8, 11, 12, 15, 21, 22, 25, + 27, 34, 36, 38, 41, 47, 48, 51, 57, 61, + 64, 69, 74, 77, 87, 93, 96, 97, 100, 103, + 104, 107, 110, 113, 114, 116, 118, 121, 122, 125, + 128, 129, 132, 135, 139, 140 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int8 yyrhs[] = +{ + 28, 0, -1, 3, 14, 29, 34, -1, 31, 34, + -1, -1, 30, 29, -1, 46, 4, 33, 33, 14, + -1, -1, 32, 31, -1, 30, -1, 46, 4, 33, + 15, 33, 14, -1, 6, -1, 7, -1, 16, 35, + -1, 17, 36, 44, 18, 14, -1, -1, 36, 37, + -1, 46, 5, 19, 38, 14, -1, 46, 5, 14, + -1, 39, 10, -1, 39, 20, 40, 21, -1, 39, + 22, 43, 23, -1, 39, 12, -1, 39, 13, 24, + 10, 25, 33, 25, 33, 26, -1, 39, 13, 24, + 10, 26, -1, 38, 11, -1, -1, 38, 25, -1, + 39, 11, -1, -1, 40, 42, -1, 40, 12, -1, + 40, 11, -1, -1, 8, -1, 6, -1, 41, 7, + -1, -1, 43, 9, -1, 43, 11, -1, -1, 45, + 44, -1, 45, 37, -1, 46, 5, 35, -1, -1, + 11, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint16 yyrline[] = +{ + 0, 89, 89, 93, 101, 104, 111, 119, 122, 129, + 133, 140, 144, 151, 158, 166, 169, 176, 180, 187, + 191, 195, 199, 203, 220, 231, 239, 242, 246, 254, + 257, 261, 266, 274, 277, 281, 285, 293, 296, 300, + 308, 311, 315, 323, 331, 334 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", + "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE", + "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'", + "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','", + "')'", "$accept", "sourcefile", "memreserves", "memreserve", + "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef", + "proplist", "propdef", "propdata", "propdataprefix", "celllist", + "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 59, 45, 47, 123, 125, 61, + 60, 62, 91, 93, 40, 44, 41 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 27, 28, 28, 29, 29, 30, 31, 31, 32, + 32, 33, 33, 34, 35, 36, 36, 37, 37, 38, + 38, 38, 38, 38, 38, 38, 39, 39, 39, 40, + 40, 40, 40, 41, 41, 42, 42, 43, 43, 43, + 44, 44, 44, 45, 46, 46 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 4, 2, 0, 2, 5, 0, 2, 1, + 6, 1, 1, 2, 5, 0, 2, 5, 3, 2, + 4, 4, 2, 9, 5, 2, 0, 2, 2, 0, + 2, 2, 2, 0, 1, 1, 2, 0, 2, 2, + 0, 2, 2, 3, 0, 1 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint8 yydefact[] = +{ + 7, 0, 45, 0, 9, 0, 7, 0, 4, 1, + 0, 3, 8, 0, 0, 4, 0, 15, 13, 11, + 12, 0, 2, 5, 0, 40, 0, 0, 0, 16, + 0, 40, 0, 0, 6, 0, 42, 41, 0, 10, + 14, 18, 26, 43, 0, 0, 25, 17, 27, 19, + 28, 22, 0, 29, 37, 0, 33, 0, 0, 35, + 34, 32, 31, 20, 0, 30, 38, 39, 21, 0, + 24, 36, 0, 0, 0, 23 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int8 yydefgoto[] = +{ + -1, 3, 14, 4, 5, 6, 27, 11, 18, 25, + 29, 44, 45, 56, 64, 65, 57, 30, 31, 7 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -14 +static const yytype_int8 yypact[] = +{ + 30, -11, -14, 7, -14, -1, 27, 13, 27, -14, + 8, -14, -14, 40, -1, 27, 35, -14, -14, -14, + -14, 21, -14, -14, 40, 24, 40, 28, 40, -14, + 32, 24, 46, 38, -14, 39, -14, -14, 26, -14, + -14, -14, -14, -14, -9, 10, -14, -14, -14, -14, + -14, -14, 31, -14, -14, 44, -2, 3, 23, -14, + -14, -14, -14, -14, 50, -14, -14, -14, -14, 40, + -14, -14, 33, 40, 36, -14 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = +{ + -14, -14, 48, 29, 53, -14, -13, 47, 34, -14, + 37, -14, -14, -14, -14, -14, -14, 42, -14, -7 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -45 +static const yytype_int8 yytable[] = +{ + 21, 16, 46, 8, 59, 47, 60, 9, 16, 61, + 62, 28, 66, 33, 67, 10, 48, 13, 32, 63, + 49, 50, 51, 52, 32, 17, 68, 19, 20, -44, + 53, -44, 54, 1, -44, 2, 26, 15, 2, 24, + 41, 2, 34, 17, 15, 42, 19, 20, 69, 70, + 35, 38, 39, 40, 58, 55, 72, 71, 73, 12, + 74, 22, 75, 23, 0, 0, 0, 0, 36, 0, + 0, 0, 43, 37 +}; + +static const yytype_int8 yycheck[] = +{ + 13, 8, 11, 14, 6, 14, 8, 0, 15, 11, + 12, 24, 9, 26, 11, 16, 25, 4, 25, 21, + 10, 11, 12, 13, 31, 17, 23, 6, 7, 5, + 20, 4, 22, 3, 4, 11, 15, 8, 11, 4, + 14, 11, 14, 17, 15, 19, 6, 7, 25, 26, + 18, 5, 14, 14, 10, 24, 69, 7, 25, 6, + 73, 14, 26, 15, -1, -1, -1, -1, 31, -1, + -1, -1, 38, 31 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 3, 11, 28, 30, 31, 32, 46, 14, 0, + 16, 34, 31, 4, 29, 30, 46, 17, 35, 6, + 7, 33, 34, 29, 4, 36, 15, 33, 33, 37, + 44, 45, 46, 33, 14, 18, 37, 44, 5, 14, + 14, 14, 19, 35, 38, 39, 11, 14, 25, 10, + 11, 12, 13, 20, 22, 24, 40, 43, 10, 6, + 8, 11, 12, 21, 41, 42, 9, 11, 23, 25, + 26, 7, 33, 25, 33, 26 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value, Location); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; + YYLTYPE const * const yylocationp; +#endif +{ + if (!yyvaluep) + return; + YYUSE (yylocationp); +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; + YYLTYPE const * const yylocationp; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + YY_LOCATION_PRINT (yyoutput, *yylocationp); + YYFPRINTF (yyoutput, ": "); + yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yylsp, yyrule) + YYSTYPE *yyvsp; + YYLTYPE *yylsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + , &(yylsp[(yyi + 1) - (yynrhs)]) ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, yylsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp) +#else +static void +yydestruct (yymsg, yytype, yyvaluep, yylocationp) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; + YYLTYPE *yylocationp; +#endif +{ + YYUSE (yyvaluep); + YYUSE (yylocationp); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; +/* Location data for the look-ahead symbol. */ +YYLTYPE yylloc; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + /* The location stack. */ + YYLTYPE yylsa[YYINITDEPTH]; + YYLTYPE *yyls = yylsa; + YYLTYPE *yylsp; + /* The locations where the error started and ended. */ + YYLTYPE yyerror_range[2]; + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + YYLTYPE yyloc; + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + yylsp = yyls; +#if YYLTYPE_IS_TRIVIAL + /* Initialize the default location before parsing starts. */ + yylloc.first_line = yylloc.last_line = 1; + yylloc.first_column = yylloc.last_column = 0; +#endif + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + YYLTYPE *yyls1 = yyls; + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + &yyls1, yysize * sizeof (*yylsp), + &yystacksize); + yyls = yyls1; + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + YYSTACK_RELOCATE (yyls); +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + yylsp = yyls + yysize - 1; + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + *++yylsp = yylloc; + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + /* Default location. */ + YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 2: +#line 90 "dtc-parser.y" + { + the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0); + ;} + break; + + case 3: +#line 94 "dtc-parser.y" + { + the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0); + ;} + break; + + case 4: +#line 101 "dtc-parser.y" + { + (yyval.re) = NULL; + ;} + break; + + case 5: +#line 105 "dtc-parser.y" + { + (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); + ;} + break; + + case 6: +#line 112 "dtc-parser.y" + { + (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref)); + ;} + break; + + case 7: +#line 119 "dtc-parser.y" + { + (yyval.re) = NULL; + ;} + break; + + case 8: +#line 123 "dtc-parser.y" + { + (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); + ;} + break; + + case 9: +#line 130 "dtc-parser.y" + { + (yyval.re) = (yyvsp[(1) - (1)].re); + ;} + break; + + case 10: +#line 134 "dtc-parser.y" + { + (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref)); + ;} + break; + + case 11: +#line 141 "dtc-parser.y" + { + (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); + ;} + break; + + case 12: +#line 145 "dtc-parser.y" + { + (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64); + ;} + break; + + case 13: +#line 152 "dtc-parser.y" + { + (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL); + ;} + break; + + case 14: +#line 159 "dtc-parser.y" + { + (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); + ;} + break; + + case 15: +#line 166 "dtc-parser.y" + { + (yyval.proplist) = NULL; + ;} + break; + + case 16: +#line 170 "dtc-parser.y" + { + (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); + ;} + break; + + case 17: +#line 177 "dtc-parser.y" + { + (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref)); + ;} + break; + + case 18: +#line 181 "dtc-parser.y" + { + (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref)); + ;} + break; + + case 19: +#line 188 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); + ;} + break; + + case 20: +#line 192 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); + ;} + break; + + case 21: +#line 196 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); + ;} + break; + + case 22: +#line 200 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 23: +#line 204 "dtc-parser.y" + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path); + struct data d = empty_data; + + if ((yyvsp[(6) - (9)].addr) != 0) + if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0) + yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", + (unsigned long long)(yyvsp[(6) - (9)].addr), + (yyvsp[(4) - (9)].data).val, strerror(errno)); + + d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr)); + + (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); + dtc_close_file(file); + ;} + break; + + case 24: +#line 221 "dtc-parser.y" + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path); + struct data d = empty_data; + + d = data_copy_file(file->file, -1); + + (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); + dtc_close_file(file); + ;} + break; + + case 25: +#line 232 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 26: +#line 239 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 27: +#line 243 "dtc-parser.y" + { + (yyval.data) = (yyvsp[(1) - (2)].data); + ;} + break; + + case 28: +#line 247 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 29: +#line 254 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 30: +#line 258 "dtc-parser.y" + { + (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell)); + ;} + break; + + case 31: +#line 262 "dtc-parser.y" + { + (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE, + (yyvsp[(2) - (2)].labelref)), -1); + ;} + break; + + case 32: +#line 267 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 33: +#line 274 "dtc-parser.y" + { + (yyval.cbase) = 16; + ;} + break; + + case 35: +#line 282 "dtc-parser.y" + { + (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32); + ;} + break; + + case 36: +#line 286 "dtc-parser.y" + { + (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32); + ;} + break; + + case 37: +#line 293 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 38: +#line 297 "dtc-parser.y" + { + (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); + ;} + break; + + case 39: +#line 301 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 40: +#line 308 "dtc-parser.y" + { + (yyval.nodelist) = NULL; + ;} + break; + + case 41: +#line 312 "dtc-parser.y" + { + (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); + ;} + break; + + case 42: +#line 316 "dtc-parser.y" + { + yyerror("syntax error: properties must precede subnodes"); + YYERROR; + ;} + break; + + case 43: +#line 324 "dtc-parser.y" + { + (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref)); + ;} + break; + + case 44: +#line 331 "dtc-parser.y" + { + (yyval.labelref) = NULL; + ;} + break; + + case 45: +#line 335 "dtc-parser.y" + { + (yyval.labelref) = (yyvsp[(1) - (1)].labelref); + ;} + break; + + +/* Line 1267 of yacc.c. */ +#line 1780 "dtc-parser.tab.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + *++yylsp = yyloc; + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + yyerror_range[0] = yylloc; + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval, &yylloc); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + yyerror_range[0] = yylsp[1-yylen]; + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + yyerror_range[0] = *yylsp; + yydestruct ("Error: popping", + yystos[yystate], yyvsp, yylsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + yyerror_range[1] = yylloc; + /* Using YYLLOC is tempting, but would change the location of + the look-ahead. YYLOC is available though. */ + YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2); + *++yylsp = yyloc; + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval, &yylloc); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp, yylsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + +#line 340 "dtc-parser.y" + + +void yyerrorf(char const *s, ...) +{ + const char *fname = srcpos_file ? srcpos_file->name : ""; + va_list va; + va_start(va, s); + + if (strcmp(fname, "-") == 0) + fname = "stdin"; + + fprintf(stderr, "%s:%d ", fname, yylloc.first_line); + vfprintf(stderr, s, va); + fprintf(stderr, "\n"); + + treesource_error = 1; + va_end(va); +} + +void yyerror (char const *s) +{ + yyerrorf("%s", s); +} + +static unsigned long long eval_literal(const char *s, int base, int bits) +{ + unsigned long long val; + char *e; + + errno = 0; + val = strtoull(s, &e, base); + if (*e) + yyerror("bad characters in literal"); + else if ((errno == ERANGE) + || ((bits < 64) && (val >= (1ULL << bits)))) + yyerror("literal out of range"); + else if (errno != 0) + yyerror("bad literal"); + return val; +} + diff --git a/scripts/dtc/dtc-parser.tab.h_shipped b/scripts/dtc/dtc-parser.tab.h_shipped new file mode 100644 index 0000000..ba99100 --- /dev/null +++ b/scripts/dtc/dtc-parser.tab.h_shipped @@ -0,0 +1,113 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + DT_V1 = 258, + DT_MEMRESERVE = 259, + DT_PROPNODENAME = 260, + DT_LITERAL = 261, + DT_LEGACYLITERAL = 262, + DT_BASE = 263, + DT_BYTE = 264, + DT_STRING = 265, + DT_LABEL = 266, + DT_REF = 267, + DT_INCBIN = 268 + }; +#endif +/* Tokens. */ +#define DT_V1 258 +#define DT_MEMRESERVE 259 +#define DT_PROPNODENAME 260 +#define DT_LITERAL 261 +#define DT_LEGACYLITERAL 262 +#define DT_BASE 263 +#define DT_BYTE 264 +#define DT_STRING 265 +#define DT_LABEL 266 +#define DT_REF 267 +#define DT_INCBIN 268 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 37 "dtc-parser.y" +{ + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + uint8_t byte; + struct data data; + + uint64_t addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} +/* Line 1489 of yacc.c. */ +#line 92 "dtc-parser.tab.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +} YYLTYPE; +# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 +#endif + +extern YYLTYPE yylloc; diff --git a/scripts/dtc/dtc-parser.y b/scripts/dtc/dtc-parser.y new file mode 100644 index 0000000..b2ab562 --- /dev/null +++ b/scripts/dtc/dtc-parser.y @@ -0,0 +1,379 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +%locations + +%{ +#include + +#include "dtc.h" +#include "srcpos.h" + +extern int yylex(void); + +extern struct boot_info *the_boot_info; +extern int treesource_error; + +static unsigned long long eval_literal(const char *s, int base, int bits); +%} + +%union { + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + uint8_t byte; + struct data data; + + uint64_t addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} + +%token DT_V1 +%token DT_MEMRESERVE +%token DT_PROPNODENAME +%token DT_LITERAL +%token DT_LEGACYLITERAL +%token DT_BASE +%token DT_BYTE +%token DT_STRING +%token DT_LABEL +%token DT_REF +%token DT_INCBIN + +%type propdata +%type propdataprefix +%type memreserve +%type memreserves +%type v0_memreserve +%type v0_memreserves +%type addr +%type celllist +%type cellbase +%type cellval +%type bytestring +%type propdef +%type proplist + +%type devicetree +%type nodedef +%type subnode +%type subnodes +%type label + +%% + +sourcefile: + DT_V1 ';' memreserves devicetree + { + the_boot_info = build_boot_info($3, $4, 0); + } + | v0_memreserves devicetree + { + the_boot_info = build_boot_info($1, $2, 0); + } + ; + +memreserves: + /* empty */ + { + $$ = NULL; + } + | memreserve memreserves + { + $$ = chain_reserve_entry($1, $2); + } + ; + +memreserve: + label DT_MEMRESERVE addr addr ';' + { + $$ = build_reserve_entry($3, $4, $1); + } + ; + +v0_memreserves: + /* empty */ + { + $$ = NULL; + } + | v0_memreserve v0_memreserves + { + $$ = chain_reserve_entry($1, $2); + }; + ; + +v0_memreserve: + memreserve + { + $$ = $1; + } + | label DT_MEMRESERVE addr '-' addr ';' + { + $$ = build_reserve_entry($3, $5 - $3 + 1, $1); + } + ; + +addr: + DT_LITERAL + { + $$ = eval_literal($1, 0, 64); + } + | DT_LEGACYLITERAL + { + $$ = eval_literal($1, 16, 64); + } + ; + +devicetree: + '/' nodedef + { + $$ = name_node($2, "", NULL); + } + ; + +nodedef: + '{' proplist subnodes '}' ';' + { + $$ = build_node($2, $3); + } + ; + +proplist: + /* empty */ + { + $$ = NULL; + } + | proplist propdef + { + $$ = chain_property($2, $1); + } + ; + +propdef: + label DT_PROPNODENAME '=' propdata ';' + { + $$ = build_property($2, $4, $1); + } + | label DT_PROPNODENAME ';' + { + $$ = build_property($2, empty_data, $1); + } + ; + +propdata: + propdataprefix DT_STRING + { + $$ = data_merge($1, $2); + } + | propdataprefix '<' celllist '>' + { + $$ = data_merge($1, $3); + } + | propdataprefix '[' bytestring ']' + { + $$ = data_merge($1, $3); + } + | propdataprefix DT_REF + { + $$ = data_add_marker($1, REF_PATH, $2); + } + | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')' + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file($4.val, &path); + struct data d = empty_data; + + if ($6 != 0) + if (fseek(file->file, $6, SEEK_SET) != 0) + yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", + (unsigned long long)$6, + $4.val, strerror(errno)); + + d = data_copy_file(file->file, $8); + + $$ = data_merge($1, d); + dtc_close_file(file); + } + | propdataprefix DT_INCBIN '(' DT_STRING ')' + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file($4.val, &path); + struct data d = empty_data; + + d = data_copy_file(file->file, -1); + + $$ = data_merge($1, d); + dtc_close_file(file); + } + | propdata DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +propdataprefix: + /* empty */ + { + $$ = empty_data; + } + | propdata ',' + { + $$ = $1; + } + | propdataprefix DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +celllist: + /* empty */ + { + $$ = empty_data; + } + | celllist cellval + { + $$ = data_append_cell($1, $2); + } + | celllist DT_REF + { + $$ = data_append_cell(data_add_marker($1, REF_PHANDLE, + $2), -1); + } + | celllist DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +cellbase: + /* empty */ + { + $$ = 16; + } + | DT_BASE + ; + +cellval: + DT_LITERAL + { + $$ = eval_literal($1, 0, 32); + } + | cellbase DT_LEGACYLITERAL + { + $$ = eval_literal($2, $1, 32); + } + ; + +bytestring: + /* empty */ + { + $$ = empty_data; + } + | bytestring DT_BYTE + { + $$ = data_append_byte($1, $2); + } + | bytestring DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +subnodes: + /* empty */ + { + $$ = NULL; + } + | subnode subnodes + { + $$ = chain_node($1, $2); + } + | subnode propdef + { + yyerror("syntax error: properties must precede subnodes"); + YYERROR; + } + ; + +subnode: + label DT_PROPNODENAME nodedef + { + $$ = name_node($3, $2, $1); + } + ; + +label: + /* empty */ + { + $$ = NULL; + } + | DT_LABEL + { + $$ = $1; + } + ; + +%% + +void yyerrorf(char const *s, ...) +{ + const char *fname = srcpos_file ? srcpos_file->name : ""; + va_list va; + va_start(va, s); + + if (strcmp(fname, "-") == 0) + fname = "stdin"; + + fprintf(stderr, "%s:%d ", fname, yylloc.first_line); + vfprintf(stderr, s, va); + fprintf(stderr, "\n"); + + treesource_error = 1; + va_end(va); +} + +void yyerror (char const *s) +{ + yyerrorf("%s", s); +} + +static unsigned long long eval_literal(const char *s, int base, int bits) +{ + unsigned long long val; + char *e; + + errno = 0; + val = strtoull(s, &e, base); + if (*e) + yyerror("bad characters in literal"); + else if ((errno == ERANGE) + || ((bits < 64) && (val >= (1ULL << bits)))) + yyerror("literal out of range"); + else if (errno != 0) + yyerror("bad literal"); + return val; +} diff --git a/scripts/dtc/dtc.c b/scripts/dtc/dtc.c new file mode 100644 index 0000000..d8fd43b --- /dev/null +++ b/scripts/dtc/dtc.c @@ -0,0 +1,226 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +#include "version_gen.h" + +/* + * Command line options + */ +int quiet; /* Level of quietness */ +int reservenum; /* Number of memory reservation slots */ +int minsize; /* Minimum blob size */ +int padsize; /* Additional padding to blob */ + +char *join_path(const char *path, const char *name) +{ + int lenp = strlen(path); + int lenn = strlen(name); + int len; + int needslash = 1; + char *str; + + len = lenp + lenn + 2; + if ((lenp > 0) && (path[lenp-1] == '/')) { + needslash = 0; + len--; + } + + str = xmalloc(len); + memcpy(str, path, lenp); + if (needslash) { + str[lenp] = '/'; + lenp++; + } + memcpy(str+lenp, name, lenn+1); + return str; +} + +static void fill_fullpaths(struct node *tree, const char *prefix) +{ + struct node *child; + const char *unit; + + tree->fullpath = join_path(prefix, tree->name); + + unit = strchr(tree->name, '@'); + if (unit) + tree->basenamelen = unit - tree->name; + else + tree->basenamelen = strlen(tree->name); + + for_each_child(tree, child) + fill_fullpaths(child, tree->fullpath); +} + +static void __attribute__ ((noreturn)) usage(void) +{ + fprintf(stderr, "Usage:\n"); + fprintf(stderr, "\tdtc [options] \n"); + fprintf(stderr, "\nOptions:\n"); + fprintf(stderr, "\t-h\n"); + fprintf(stderr, "\t\tThis help text\n"); + fprintf(stderr, "\t-q\n"); + fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n"); + fprintf(stderr, "\t-I \n"); + fprintf(stderr, "\t\tInput formats are:\n"); + fprintf(stderr, "\t\t\tdts - device tree source text\n"); + fprintf(stderr, "\t\t\tdtb - device tree blob\n"); + fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n"); + fprintf(stderr, "\t-o \n"); + fprintf(stderr, "\t-O \n"); + fprintf(stderr, "\t\tOutput formats are:\n"); + fprintf(stderr, "\t\t\tdts - device tree source text\n"); + fprintf(stderr, "\t\t\tdtb - device tree blob\n"); + fprintf(stderr, "\t\t\tasm - assembler source\n"); + fprintf(stderr, "\t-V \n"); + fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION); + fprintf(stderr, "\t-R \n"); + fprintf(stderr, "\t\tMake space for reserve map entries (relevant for \n\t\tdtb and asm output only)\n"); + fprintf(stderr, "\t-S \n"); + fprintf(stderr, "\t\tMake the blob at least long (extra space)\n"); + fprintf(stderr, "\t-p \n"); + fprintf(stderr, "\t\tAdd padding to the blob of long (extra space)\n"); + fprintf(stderr, "\t-b \n"); + fprintf(stderr, "\t\tSet the physical boot cpu\n"); + fprintf(stderr, "\t-f\n"); + fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n"); + fprintf(stderr, "\t-v\n"); + fprintf(stderr, "\t\tPrint DTC version and exit\n"); + exit(3); +} + +int main(int argc, char *argv[]) +{ + struct boot_info *bi; + const char *inform = "dts"; + const char *outform = "dts"; + const char *outname = "-"; + int force = 0, check = 0; + const char *arg; + int opt; + FILE *outf = NULL; + int outversion = DEFAULT_FDT_VERSION; + long long cmdline_boot_cpuid = -1; + + quiet = 0; + reservenum = 0; + minsize = 0; + padsize = 0; + + while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) { + switch (opt) { + case 'I': + inform = optarg; + break; + case 'O': + outform = optarg; + break; + case 'o': + outname = optarg; + break; + case 'V': + outversion = strtol(optarg, NULL, 0); + break; + case 'R': + reservenum = strtol(optarg, NULL, 0); + break; + case 'S': + minsize = strtol(optarg, NULL, 0); + break; + case 'p': + padsize = strtol(optarg, NULL, 0); + break; + case 'f': + force = 1; + break; + case 'c': + check = 1; + break; + case 'q': + quiet++; + break; + case 'b': + cmdline_boot_cpuid = strtoll(optarg, NULL, 0); + break; + case 'v': + printf("Version: %s\n", DTC_VERSION); + exit(0); + case 'h': + default: + usage(); + } + } + + if (argc > (optind+1)) + usage(); + else if (argc < (optind+1)) + arg = "-"; + else + arg = argv[optind]; + + /* minsize and padsize are mutually exclusive */ + if (minsize && padsize) + die("Can't set both -p and -S\n"); + + fprintf(stderr, "DTC: %s->%s on file \"%s\"\n", + inform, outform, arg); + + if (streq(inform, "dts")) + bi = dt_from_source(arg); + else if (streq(inform, "fs")) + bi = dt_from_fs(arg); + else if(streq(inform, "dtb")) + bi = dt_from_blob(arg); + else + die("Unknown input format \"%s\"\n", inform); + + if (cmdline_boot_cpuid != -1) + bi->boot_cpuid_phys = cmdline_boot_cpuid; + + fill_fullpaths(bi->dt, ""); + process_checks(force, bi); + + + if (streq(outname, "-")) { + outf = stdout; + } else { + outf = fopen(outname, "w"); + if (! outf) + die("Couldn't open output file %s: %s\n", + outname, strerror(errno)); + } + + if (streq(outform, "dts")) { + dt_to_source(outf, bi); + } else if (streq(outform, "dtb")) { + dt_to_blob(outf, bi, outversion); + } else if (streq(outform, "asm")) { + dt_to_asm(outf, bi, outversion); + } else if (streq(outform, "null")) { + /* do nothing */ + } else { + die("Unknown output format \"%s\"\n", outform); + } + + exit(0); +} diff --git a/scripts/dtc/dtc.h b/scripts/dtc/dtc.h new file mode 100644 index 0000000..08d54c8 --- /dev/null +++ b/scripts/dtc/dtc.h @@ -0,0 +1,246 @@ +#ifndef _DTC_H +#define _DTC_H + +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DEFAULT_FDT_VERSION 17 +/* + * Command line options + */ +extern int quiet; /* Level of quietness */ +extern int reservenum; /* Number of memory reservation slots */ +extern int minsize; /* Minimum blob size */ +extern int padsize; /* Additional padding to blob */ + +static inline void __attribute__((noreturn)) die(char * str, ...) +{ + va_list ap; + + va_start(ap, str); + fprintf(stderr, "FATAL ERROR: "); + vfprintf(stderr, str, ap); + exit(1); +} + +static inline void *xmalloc(size_t len) +{ + void *new = malloc(len); + + if (! new) + die("malloc() failed\n"); + + return new; +} + +static inline void *xrealloc(void *p, size_t len) +{ + void *new = realloc(p, len); + + if (! new) + die("realloc() failed (len=%d)\n", len); + + return new; +} + +typedef uint32_t cell_t; + + +#define streq(a, b) (strcmp((a), (b)) == 0) +#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0) + +#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +/* Data blobs */ +enum markertype { + REF_PHANDLE, + REF_PATH, + LABEL, +}; + +struct marker { + enum markertype type; + int offset; + char *ref; + struct marker *next; +}; + +struct data { + int len; + char *val; + struct marker *markers; +}; + + +#define empty_data ((struct data){ /* all .members = 0 or NULL */ }) + +#define for_each_marker(m) \ + for (; (m); (m) = (m)->next) +#define for_each_marker_of_type(m, t) \ + for_each_marker(m) \ + if ((m)->type == (t)) + +void data_free(struct data d); + +struct data data_grow_for(struct data d, int xlen); + +struct data data_copy_mem(const char *mem, int len); +struct data data_copy_escape_string(const char *s, int len); +struct data data_copy_file(FILE *f, size_t len); + +struct data data_append_data(struct data d, const void *p, int len); +struct data data_insert_at_marker(struct data d, struct marker *m, + const void *p, int len); +struct data data_merge(struct data d1, struct data d2); +struct data data_append_cell(struct data d, cell_t word); +struct data data_append_re(struct data d, const struct fdt_reserve_entry *re); +struct data data_append_addr(struct data d, uint64_t addr); +struct data data_append_byte(struct data d, uint8_t byte); +struct data data_append_zeroes(struct data d, int len); +struct data data_append_align(struct data d, int align); + +struct data data_add_marker(struct data d, enum markertype type, char *ref); + +int data_is_one_string(struct data d); + +/* DT constraints */ + +#define MAX_PROPNAME_LEN 31 +#define MAX_NODENAME_LEN 31 + +/* Live trees */ +struct property { + char *name; + struct data val; + + struct property *next; + + char *label; +}; + +struct node { + char *name; + struct property *proplist; + struct node *children; + + struct node *parent; + struct node *next_sibling; + + char *fullpath; + int basenamelen; + + cell_t phandle; + int addr_cells, size_cells; + + char *label; +}; + +#define for_each_property(n, p) \ + for ((p) = (n)->proplist; (p); (p) = (p)->next) + +#define for_each_child(n, c) \ + for ((c) = (n)->children; (c); (c) = (c)->next_sibling) + +struct property *build_property(char *name, struct data val, char *label); +struct property *chain_property(struct property *first, struct property *list); +struct property *reverse_properties(struct property *first); + +struct node *build_node(struct property *proplist, struct node *children); +struct node *name_node(struct node *node, char *name, char *label); +struct node *chain_node(struct node *first, struct node *list); + +void add_property(struct node *node, struct property *prop); +void add_child(struct node *parent, struct node *child); + +const char *get_unitname(struct node *node); +struct property *get_property(struct node *node, const char *propname); +cell_t propval_cell(struct property *prop); +struct node *get_subnode(struct node *node, const char *nodename); +struct node *get_node_by_path(struct node *tree, const char *path); +struct node *get_node_by_label(struct node *tree, const char *label); +struct node *get_node_by_phandle(struct node *tree, cell_t phandle); +struct node *get_node_by_ref(struct node *tree, const char *ref); +cell_t get_node_phandle(struct node *root, struct node *node); + +/* Boot info (tree plus memreserve information */ + +struct reserve_info { + struct fdt_reserve_entry re; + + struct reserve_info *next; + + char *label; +}; + +struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label); +struct reserve_info *chain_reserve_entry(struct reserve_info *first, + struct reserve_info *list); +struct reserve_info *add_reserve_entry(struct reserve_info *list, + struct reserve_info *new); + + +struct boot_info { + struct reserve_info *reservelist; + struct node *dt; /* the device tree */ + uint32_t boot_cpuid_phys; +}; + +struct boot_info *build_boot_info(struct reserve_info *reservelist, + struct node *tree, uint32_t boot_cpuid_phys); + +/* Checks */ + +void process_checks(int force, struct boot_info *bi); + +/* Flattened trees */ + +void dt_to_blob(FILE *f, struct boot_info *bi, int version); +void dt_to_asm(FILE *f, struct boot_info *bi, int version); + +struct boot_info *dt_from_blob(const char *fname); + +/* Tree source */ + +void dt_to_source(FILE *f, struct boot_info *bi); +struct boot_info *dt_from_source(const char *f); + +/* FS trees */ + +struct boot_info *dt_from_fs(const char *dirname); + +/* misc */ + +char *join_path(const char *path, const char *name); + +#endif /* _DTC_H */ diff --git a/scripts/dtc/flattree.c b/scripts/dtc/flattree.c new file mode 100644 index 0000000..76acd28 --- /dev/null +++ b/scripts/dtc/flattree.c @@ -0,0 +1,906 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +#define FTF_FULLPATH 0x1 +#define FTF_VARALIGN 0x2 +#define FTF_NAMEPROPS 0x4 +#define FTF_BOOTCPUID 0x8 +#define FTF_STRTABSIZE 0x10 +#define FTF_STRUCTSIZE 0x20 +#define FTF_NOPS 0x40 + +static struct version_info { + int version; + int last_comp_version; + int hdr_size; + int flags; +} version_table[] = { + {1, 1, FDT_V1_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS}, + {2, 1, FDT_V2_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID}, + {3, 1, FDT_V3_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE}, + {16, 16, FDT_V3_SIZE, + FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS}, + {17, 16, FDT_V17_SIZE, + FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS}, +}; + +struct emitter { + void (*cell)(void *, cell_t); + void (*string)(void *, char *, int); + void (*align)(void *, int); + void (*data)(void *, struct data); + void (*beginnode)(void *, const char *); + void (*endnode)(void *, const char *); + void (*property)(void *, const char *); +}; + +static void bin_emit_cell(void *e, cell_t val) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_cell(*dtbuf, val); +} + +static void bin_emit_string(void *e, char *str, int len) +{ + struct data *dtbuf = e; + + if (len == 0) + len = strlen(str); + + *dtbuf = data_append_data(*dtbuf, str, len); + *dtbuf = data_append_byte(*dtbuf, '\0'); +} + +static void bin_emit_align(void *e, int a) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_align(*dtbuf, a); +} + +static void bin_emit_data(void *e, struct data d) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_data(*dtbuf, d.val, d.len); +} + +static void bin_emit_beginnode(void *e, const char *label) +{ + bin_emit_cell(e, FDT_BEGIN_NODE); +} + +static void bin_emit_endnode(void *e, const char *label) +{ + bin_emit_cell(e, FDT_END_NODE); +} + +static void bin_emit_property(void *e, const char *label) +{ + bin_emit_cell(e, FDT_PROP); +} + +static struct emitter bin_emitter = { + .cell = bin_emit_cell, + .string = bin_emit_string, + .align = bin_emit_align, + .data = bin_emit_data, + .beginnode = bin_emit_beginnode, + .endnode = bin_emit_endnode, + .property = bin_emit_property, +}; + +static void emit_label(FILE *f, const char *prefix, const char *label) +{ + fprintf(f, "\t.globl\t%s_%s\n", prefix, label); + fprintf(f, "%s_%s:\n", prefix, label); + fprintf(f, "_%s_%s:\n", prefix, label); +} + +static void emit_offset_label(FILE *f, const char *label, int offset) +{ + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s\t= . + %d\n", label, offset); +} + +static void asm_emit_cell(void *e, cell_t val) +{ + FILE *f = e; + + fprintf(f, "\t.long\t0x%x\n", val); +} + +static void asm_emit_string(void *e, char *str, int len) +{ + FILE *f = e; + char c = 0; + + if (len != 0) { + /* XXX: ewww */ + c = str[len]; + str[len] = '\0'; + } + + fprintf(f, "\t.string\t\"%s\"\n", str); + + if (len != 0) { + str[len] = c; + } +} + +static void asm_emit_align(void *e, int a) +{ + FILE *f = e; + + fprintf(f, "\t.balign\t%d\n", a); +} + +static void asm_emit_data(void *e, struct data d) +{ + FILE *f = e; + int off = 0; + struct marker *m = d.markers; + + for_each_marker_of_type(m, LABEL) + emit_offset_label(f, m->ref, m->offset); + + while ((d.len - off) >= sizeof(uint32_t)) { + fprintf(f, "\t.long\t0x%x\n", + fdt32_to_cpu(*((uint32_t *)(d.val+off)))); + off += sizeof(uint32_t); + } + + while ((d.len - off) >= 1) { + fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]); + off += 1; + } + + assert(off == d.len); +} + +static void asm_emit_beginnode(void *e, const char *label) +{ + FILE *f = e; + + if (label) { + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s:\n", label); + } + fprintf(f, "\t.long\tFDT_BEGIN_NODE\n"); +} + +static void asm_emit_endnode(void *e, const char *label) +{ + FILE *f = e; + + fprintf(f, "\t.long\tFDT_END_NODE\n"); + if (label) { + fprintf(f, "\t.globl\t%s_end\n", label); + fprintf(f, "%s_end:\n", label); + } +} + +static void asm_emit_property(void *e, const char *label) +{ + FILE *f = e; + + if (label) { + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s:\n", label); + } + fprintf(f, "\t.long\tFDT_PROP\n"); +} + +static struct emitter asm_emitter = { + .cell = asm_emit_cell, + .string = asm_emit_string, + .align = asm_emit_align, + .data = asm_emit_data, + .beginnode = asm_emit_beginnode, + .endnode = asm_emit_endnode, + .property = asm_emit_property, +}; + +static int stringtable_insert(struct data *d, const char *str) +{ + int i; + + /* FIXME: do this more efficiently? */ + + for (i = 0; i < d->len; i++) { + if (streq(str, d->val + i)) + return i; + } + + *d = data_append_data(*d, str, strlen(str)+1); + return i; +} + +static void flatten_tree(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, + struct version_info *vi) +{ + struct property *prop; + struct node *child; + int seen_name_prop = 0; + + emit->beginnode(etarget, tree->label); + + if (vi->flags & FTF_FULLPATH) + emit->string(etarget, tree->fullpath, 0); + else + emit->string(etarget, tree->name, 0); + + emit->align(etarget, sizeof(cell_t)); + + for_each_property(tree, prop) { + int nameoff; + + if (streq(prop->name, "name")) + seen_name_prop = 1; + + nameoff = stringtable_insert(strbuf, prop->name); + + emit->property(etarget, prop->label); + emit->cell(etarget, prop->val.len); + emit->cell(etarget, nameoff); + + if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8)) + emit->align(etarget, 8); + + emit->data(etarget, prop->val); + emit->align(etarget, sizeof(cell_t)); + } + + if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) { + emit->property(etarget, NULL); + emit->cell(etarget, tree->basenamelen+1); + emit->cell(etarget, stringtable_insert(strbuf, "name")); + + if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8)) + emit->align(etarget, 8); + + emit->string(etarget, tree->name, tree->basenamelen); + emit->align(etarget, sizeof(cell_t)); + } + + for_each_child(tree, child) { + flatten_tree(child, emit, etarget, strbuf, vi); + } + + emit->endnode(etarget, tree->label); +} + +static struct data flatten_reserve_list(struct reserve_info *reservelist, + struct version_info *vi) +{ + struct reserve_info *re; + struct data d = empty_data; + static struct fdt_reserve_entry null_re = {0,0}; + int j; + + for (re = reservelist; re; re = re->next) { + d = data_append_re(d, &re->re); + } + /* + * Add additional reserved slots if the user asked for them. + */ + for (j = 0; j < reservenum; j++) { + d = data_append_re(d, &null_re); + } + + return d; +} + +static void make_fdt_header(struct fdt_header *fdt, + struct version_info *vi, + int reservesize, int dtsize, int strsize, + int boot_cpuid_phys) +{ + int reserve_off; + + reservesize += sizeof(struct fdt_reserve_entry); + + memset(fdt, 0xff, sizeof(*fdt)); + + fdt->magic = cpu_to_fdt32(FDT_MAGIC); + fdt->version = cpu_to_fdt32(vi->version); + fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version); + + /* Reserve map should be doubleword aligned */ + reserve_off = ALIGN(vi->hdr_size, 8); + + fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off); + fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize); + fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize + + dtsize); + fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize); + + if (vi->flags & FTF_BOOTCPUID) + fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys); + if (vi->flags & FTF_STRTABSIZE) + fdt->size_dt_strings = cpu_to_fdt32(strsize); + if (vi->flags & FTF_STRUCTSIZE) + fdt->size_dt_struct = cpu_to_fdt32(dtsize); +} + +void dt_to_blob(FILE *f, struct boot_info *bi, int version) +{ + struct version_info *vi = NULL; + int i; + struct data blob = empty_data; + struct data reservebuf = empty_data; + struct data dtbuf = empty_data; + struct data strbuf = empty_data; + struct fdt_header fdt; + int padlen = 0; + + for (i = 0; i < ARRAY_SIZE(version_table); i++) { + if (version_table[i].version == version) + vi = &version_table[i]; + } + if (!vi) + die("Unknown device tree blob version %d\n", version); + + flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi); + bin_emit_cell(&dtbuf, FDT_END); + + reservebuf = flatten_reserve_list(bi->reservelist, vi); + + /* Make header */ + make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len, + bi->boot_cpuid_phys); + + /* + * If the user asked for more space than is used, adjust the totalsize. + */ + if (minsize > 0) { + padlen = minsize - fdt32_to_cpu(fdt.totalsize); + if ((padlen < 0) && (quiet < 1)) + fprintf(stderr, + "Warning: blob size %d >= minimum size %d\n", + fdt32_to_cpu(fdt.totalsize), minsize); + } + + if (padsize > 0) + padlen = padsize; + + if (padlen > 0) { + int tsize = fdt32_to_cpu(fdt.totalsize); + tsize += padlen; + fdt.totalsize = cpu_to_fdt32(tsize); + } + + /* + * Assemble the blob: start with the header, add with alignment + * the reserve buffer, add the reserve map terminating zeroes, + * the device tree itself, and finally the strings. + */ + blob = data_append_data(blob, &fdt, vi->hdr_size); + blob = data_append_align(blob, 8); + blob = data_merge(blob, reservebuf); + blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry)); + blob = data_merge(blob, dtbuf); + blob = data_merge(blob, strbuf); + + /* + * If the user asked for more space than is used, pad out the blob. + */ + if (padlen > 0) + blob = data_append_zeroes(blob, padlen); + + fwrite(blob.val, blob.len, 1, f); + + if (ferror(f)) + die("Error writing device tree blob: %s\n", strerror(errno)); + + /* + * data_merge() frees the right-hand element so only the blob + * remains to be freed. + */ + data_free(blob); +} + +static void dump_stringtable_asm(FILE *f, struct data strbuf) +{ + const char *p; + int len; + + p = strbuf.val; + + while (p < (strbuf.val + strbuf.len)) { + len = strlen(p); + fprintf(f, "\t.string \"%s\"\n", p); + p += len+1; + } +} + +void dt_to_asm(FILE *f, struct boot_info *bi, int version) +{ + struct version_info *vi = NULL; + int i; + struct data strbuf = empty_data; + struct reserve_info *re; + const char *symprefix = "dt"; + + for (i = 0; i < ARRAY_SIZE(version_table); i++) { + if (version_table[i].version == version) + vi = &version_table[i]; + } + if (!vi) + die("Unknown device tree blob version %d\n", version); + + fprintf(f, "/* autogenerated by dtc, do not edit */\n\n"); + fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC); + fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE); + fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE); + fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP); + fprintf(f, "#define FDT_END 0x%x\n", FDT_END); + fprintf(f, "\n"); + + emit_label(f, symprefix, "blob_start"); + emit_label(f, symprefix, "header"); + fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n"); + fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version); + fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n", + vi->last_comp_version); + + if (vi->flags & FTF_BOOTCPUID) + fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n", + bi->boot_cpuid_phys); + + if (vi->flags & FTF_STRTABSIZE) + fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n", + symprefix, symprefix); + + if (vi->flags & FTF_STRUCTSIZE) + fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n", + symprefix, symprefix); + + /* + * Reserve map entries. + * Align the reserve map to a doubleword boundary. + * Each entry is an (address, size) pair of u64 values. + * Always supply a zero-sized temination entry. + */ + asm_emit_align(f, 8); + emit_label(f, symprefix, "reserve_map"); + + fprintf(f, "/* Memory reserve map from source file */\n"); + + /* + * Use .long on high and low halfs of u64s to avoid .quad + * as it appears .quad isn't available in some assemblers. + */ + for (re = bi->reservelist; re; re = re->next) { + if (re->label) { + fprintf(f, "\t.globl\t%s\n", re->label); + fprintf(f, "%s:\n", re->label); + } + fprintf(f, "\t.long\t0x%08x, 0x%08x\n", + (unsigned int)(re->re.address >> 32), + (unsigned int)(re->re.address & 0xffffffff)); + fprintf(f, "\t.long\t0x%08x, 0x%08x\n", + (unsigned int)(re->re.size >> 32), + (unsigned int)(re->re.size & 0xffffffff)); + } + for (i = 0; i < reservenum; i++) { + fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); + } + + fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); + + emit_label(f, symprefix, "struct_start"); + flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi); + fprintf(f, "\t.long\tFDT_END\n"); + emit_label(f, symprefix, "struct_end"); + + emit_label(f, symprefix, "strings_start"); + dump_stringtable_asm(f, strbuf); + emit_label(f, symprefix, "strings_end"); + + emit_label(f, symprefix, "blob_end"); + + /* + * If the user asked for more space than is used, pad it out. + */ + if (minsize > 0) { + fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n", + minsize, symprefix, symprefix); + } + if (padsize > 0) { + fprintf(f, "\t.space\t%d, 0\n", padsize); + } + emit_label(f, symprefix, "blob_abs_end"); + + data_free(strbuf); +} + +struct inbuf { + char *base, *limit, *ptr; +}; + +static void inbuf_init(struct inbuf *inb, void *base, void *limit) +{ + inb->base = base; + inb->limit = limit; + inb->ptr = inb->base; +} + +static void flat_read_chunk(struct inbuf *inb, void *p, int len) +{ + if ((inb->ptr + len) > inb->limit) + die("Premature end of data parsing flat device tree\n"); + + memcpy(p, inb->ptr, len); + + inb->ptr += len; +} + +static uint32_t flat_read_word(struct inbuf *inb) +{ + uint32_t val; + + assert(((inb->ptr - inb->base) % sizeof(val)) == 0); + + flat_read_chunk(inb, &val, sizeof(val)); + + return fdt32_to_cpu(val); +} + +static void flat_realign(struct inbuf *inb, int align) +{ + int off = inb->ptr - inb->base; + + inb->ptr = inb->base + ALIGN(off, align); + if (inb->ptr > inb->limit) + die("Premature end of data parsing flat device tree\n"); +} + +static char *flat_read_string(struct inbuf *inb) +{ + int len = 0; + const char *p = inb->ptr; + char *str; + + do { + if (p >= inb->limit) + die("Premature end of data parsing flat device tree\n"); + len++; + } while ((*p++) != '\0'); + + str = strdup(inb->ptr); + + inb->ptr += len; + + flat_realign(inb, sizeof(uint32_t)); + + return str; +} + +static struct data flat_read_data(struct inbuf *inb, int len) +{ + struct data d = empty_data; + + if (len == 0) + return empty_data; + + d = data_grow_for(d, len); + d.len = len; + + flat_read_chunk(inb, d.val, len); + + flat_realign(inb, sizeof(uint32_t)); + + return d; +} + +static char *flat_read_stringtable(struct inbuf *inb, int offset) +{ + const char *p; + + p = inb->base + offset; + while (1) { + if (p >= inb->limit || p < inb->base) + die("String offset %d overruns string table\n", + offset); + + if (*p == '\0') + break; + + p++; + } + + return strdup(inb->base + offset); +} + +static struct property *flat_read_property(struct inbuf *dtbuf, + struct inbuf *strbuf, int flags) +{ + uint32_t proplen, stroff; + char *name; + struct data val; + + proplen = flat_read_word(dtbuf); + stroff = flat_read_word(dtbuf); + + name = flat_read_stringtable(strbuf, stroff); + + if ((flags & FTF_VARALIGN) && (proplen >= 8)) + flat_realign(dtbuf, 8); + + val = flat_read_data(dtbuf, proplen); + + return build_property(name, val, NULL); +} + + +static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb) +{ + struct reserve_info *reservelist = NULL; + struct reserve_info *new; + const char *p; + struct fdt_reserve_entry re; + + /* + * Each entry is a pair of u64 (addr, size) values for 4 cell_t's. + * List terminates at an entry with size equal to zero. + * + * First pass, count entries. + */ + p = inb->ptr; + while (1) { + flat_read_chunk(inb, &re, sizeof(re)); + re.address = fdt64_to_cpu(re.address); + re.size = fdt64_to_cpu(re.size); + if (re.size == 0) + break; + + new = build_reserve_entry(re.address, re.size, NULL); + reservelist = add_reserve_entry(reservelist, new); + } + + return reservelist; +} + + +static char *nodename_from_path(const char *ppath, const char *cpath) +{ + int plen; + + plen = strlen(ppath); + + if (!strneq(ppath, cpath, plen)) + die("Path \"%s\" is not valid as a child of \"%s\"\n", + cpath, ppath); + + /* root node is a special case */ + if (!streq(ppath, "/")) + plen++; + + return strdup(cpath + plen); +} + +static struct node *unflatten_tree(struct inbuf *dtbuf, + struct inbuf *strbuf, + const char *parent_flatname, int flags) +{ + struct node *node; + char *flatname; + uint32_t val; + + node = build_node(NULL, NULL); + + flatname = flat_read_string(dtbuf); + + if (flags & FTF_FULLPATH) + node->name = nodename_from_path(parent_flatname, flatname); + else + node->name = flatname; + + do { + struct property *prop; + struct node *child; + + val = flat_read_word(dtbuf); + switch (val) { + case FDT_PROP: + if (node->children) + fprintf(stderr, "Warning: Flat tree input has " + "subnodes preceding a property.\n"); + prop = flat_read_property(dtbuf, strbuf, flags); + add_property(node, prop); + break; + + case FDT_BEGIN_NODE: + child = unflatten_tree(dtbuf,strbuf, flatname, flags); + add_child(node, child); + break; + + case FDT_END_NODE: + break; + + case FDT_END: + die("Premature FDT_END in device tree blob\n"); + break; + + case FDT_NOP: + if (!(flags & FTF_NOPS)) + fprintf(stderr, "Warning: NOP tag found in flat tree" + " version <16\n"); + + /* Ignore */ + break; + + default: + die("Invalid opcode word %08x in device tree blob\n", + val); + } + } while (val != FDT_END_NODE); + + return node; +} + + +struct boot_info *dt_from_blob(const char *fname) +{ + struct dtc_file *dtcf; + uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys; + uint32_t off_dt, off_str, off_mem_rsvmap; + int rc; + char *blob; + struct fdt_header *fdt; + char *p; + struct inbuf dtbuf, strbuf; + struct inbuf memresvbuf; + int sizeleft; + struct reserve_info *reservelist; + struct node *tree; + uint32_t val; + int flags = 0; + + dtcf = dtc_open_file(fname, NULL); + + rc = fread(&magic, sizeof(magic), 1, dtcf->file); + if (ferror(dtcf->file)) + die("Error reading DT blob magic number: %s\n", + strerror(errno)); + if (rc < 1) { + if (feof(dtcf->file)) + die("EOF reading DT blob magic number\n"); + else + die("Mysterious short read reading magic number\n"); + } + + magic = fdt32_to_cpu(magic); + if (magic != FDT_MAGIC) + die("Blob has incorrect magic number\n"); + + rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file); + if (ferror(dtcf->file)) + die("Error reading DT blob size: %s\n", strerror(errno)); + if (rc < 1) { + if (feof(dtcf->file)) + die("EOF reading DT blob size\n"); + else + die("Mysterious short read reading blob size\n"); + } + + totalsize = fdt32_to_cpu(totalsize); + if (totalsize < FDT_V1_SIZE) + die("DT blob size (%d) is too small\n", totalsize); + + blob = xmalloc(totalsize); + + fdt = (struct fdt_header *)blob; + fdt->magic = cpu_to_fdt32(magic); + fdt->totalsize = cpu_to_fdt32(totalsize); + + sizeleft = totalsize - sizeof(magic) - sizeof(totalsize); + p = blob + sizeof(magic) + sizeof(totalsize); + + while (sizeleft) { + if (feof(dtcf->file)) + die("EOF before reading %d bytes of DT blob\n", + totalsize); + + rc = fread(p, 1, sizeleft, dtcf->file); + if (ferror(dtcf->file)) + die("Error reading DT blob: %s\n", + strerror(errno)); + + sizeleft -= rc; + p += rc; + } + + off_dt = fdt32_to_cpu(fdt->off_dt_struct); + off_str = fdt32_to_cpu(fdt->off_dt_strings); + off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap); + version = fdt32_to_cpu(fdt->version); + boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys); + + if (off_mem_rsvmap >= totalsize) + die("Mem Reserve structure offset exceeds total size\n"); + + if (off_dt >= totalsize) + die("DT structure offset exceeds total size\n"); + + if (off_str > totalsize) + die("String table offset exceeds total size\n"); + + if (version >= 3) { + uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings); + if (off_str+size_str > totalsize) + die("String table extends past total size\n"); + inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str); + } else { + inbuf_init(&strbuf, blob + off_str, blob + totalsize); + } + + if (version >= 17) { + size_dt = fdt32_to_cpu(fdt->size_dt_struct); + if (off_dt+size_dt > totalsize) + die("Structure block extends past total size\n"); + } + + if (version < 16) { + flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN; + } else { + flags |= FTF_NOPS; + } + + inbuf_init(&memresvbuf, + blob + off_mem_rsvmap, blob + totalsize); + inbuf_init(&dtbuf, blob + off_dt, blob + totalsize); + + reservelist = flat_read_mem_reserve(&memresvbuf); + + val = flat_read_word(&dtbuf); + + if (val != FDT_BEGIN_NODE) + die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val); + + tree = unflatten_tree(&dtbuf, &strbuf, "", flags); + + val = flat_read_word(&dtbuf); + if (val != FDT_END) + die("Device tree blob doesn't end with FDT_END\n"); + + free(blob); + + dtc_close_file(dtcf); + + return build_boot_info(reservelist, tree, boot_cpuid_phys); +} diff --git a/scripts/dtc/fstree.c b/scripts/dtc/fstree.c new file mode 100644 index 0000000..766b269 --- /dev/null +++ b/scripts/dtc/fstree.c @@ -0,0 +1,92 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +#include +#include + +static struct node *read_fstree(const char *dirname) +{ + DIR *d; + struct dirent *de; + struct stat st; + struct node *tree; + + d = opendir(dirname); + if (!d) + die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno)); + + tree = build_node(NULL, NULL); + + while ((de = readdir(d)) != NULL) { + char *tmpnam; + + if (streq(de->d_name, ".") + || streq(de->d_name, "..")) + continue; + + tmpnam = join_path(dirname, de->d_name); + + if (lstat(tmpnam, &st) < 0) + die("stat(%s): %s\n", tmpnam, strerror(errno)); + + if (S_ISREG(st.st_mode)) { + struct property *prop; + FILE *pfile; + + pfile = fopen(tmpnam, "r"); + if (! pfile) { + fprintf(stderr, + "WARNING: Cannot open %s: %s\n", + tmpnam, strerror(errno)); + } else { + prop = build_property(strdup(de->d_name), + data_copy_file(pfile, + st.st_size), + NULL); + add_property(tree, prop); + fclose(pfile); + } + } else if (S_ISDIR(st.st_mode)) { + struct node *newchild; + + newchild = read_fstree(tmpnam); + newchild = name_node(newchild, strdup(de->d_name), + NULL); + add_child(tree, newchild); + } + + free(tmpnam); + } + + return tree; +} + +struct boot_info *dt_from_fs(const char *dirname) +{ + struct node *tree; + + tree = read_fstree(dirname); + tree = name_node(tree, "", NULL); + + return build_boot_info(NULL, tree, 0); +} + diff --git a/scripts/dtc/libfdt/Makefile.libfdt b/scripts/dtc/libfdt/Makefile.libfdt new file mode 100644 index 0000000..6c42acf --- /dev/null +++ b/scripts/dtc/libfdt/Makefile.libfdt @@ -0,0 +1,8 @@ +# Makefile.libfdt +# +# This is not a complete Makefile of itself. Instead, it is designed to +# be easily embeddable into other systems of Makefiles. +# +LIBFDT_INCLUDES = fdt.h libfdt.h +LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o) diff --git a/scripts/dtc/libfdt/fdt.c b/scripts/dtc/libfdt/fdt.c new file mode 100644 index 0000000..2acaec5 --- /dev/null +++ b/scripts/dtc/libfdt/fdt.c @@ -0,0 +1,201 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +int fdt_check_header(const void *fdt) +{ + if (fdt_magic(fdt) == FDT_MAGIC) { + /* Complete tree */ + if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + } else if (fdt_magic(fdt) == FDT_SW_MAGIC) { + /* Unfinished sequential-write blob */ + if (fdt_size_dt_struct(fdt) == 0) + return -FDT_ERR_BADSTATE; + } else { + return -FDT_ERR_BADMAGIC; + } + + return 0; +} + +const void *fdt_offset_ptr(const void *fdt, int offset, int len) +{ + const char *p; + + if (fdt_version(fdt) >= 0x11) + if (((offset + len) < offset) + || ((offset + len) > fdt_size_dt_struct(fdt))) + return NULL; + + p = _fdt_offset_ptr(fdt, offset); + + if (p + len < p) + return NULL; + return p; +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset) +{ + const uint32_t *tagp, *lenp; + uint32_t tag; + const char *p; + + if (offset % FDT_TAGSIZE) + return -1; + + tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); + if (! tagp) + return FDT_END; /* premature end */ + tag = fdt32_to_cpu(*tagp); + offset += FDT_TAGSIZE; + + switch (tag) { + case FDT_BEGIN_NODE: + /* skip name */ + do { + p = fdt_offset_ptr(fdt, offset++, 1); + } while (p && (*p != '\0')); + if (! p) + return FDT_END; + break; + case FDT_PROP: + lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); + if (! lenp) + return FDT_END; + /* skip name offset, length and value */ + offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp); + break; + } + + if (nextoffset) + *nextoffset = FDT_TAGALIGN(offset); + + return tag; +} + +int _fdt_check_node_offset(const void *fdt, int offset) +{ + if ((offset < 0) || (offset % FDT_TAGSIZE) + || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE)) + return -FDT_ERR_BADOFFSET; + + return offset; +} + +int fdt_next_node(const void *fdt, int offset, int *depth) +{ + int nextoffset = 0; + uint32_t tag; + + if (offset >= 0) + if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0) + return nextoffset; + + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_PROP: + case FDT_NOP: + break; + + case FDT_BEGIN_NODE: + if (depth) + (*depth)++; + break; + + case FDT_END_NODE: + if (depth) + (*depth)--; + break; + + case FDT_END: + return -FDT_ERR_NOTFOUND; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (tag != FDT_BEGIN_NODE); + + return offset; +} + +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) +{ + int len = strlen(s) + 1; + const char *last = strtab + tabsize - len; + const char *p; + + for (p = strtab; p <= last; p++) + if (memcmp(p, s, len) == 0) + return p; + return NULL; +} + +int fdt_move(const void *fdt, void *buf, int bufsize) +{ + FDT_CHECK_HEADER(fdt); + + if (fdt_totalsize(fdt) > bufsize) + return -FDT_ERR_NOSPACE; + + memmove(buf, fdt, fdt_totalsize(fdt)); + return 0; +} diff --git a/scripts/dtc/libfdt/fdt.h b/scripts/dtc/libfdt/fdt.h new file mode 100644 index 0000000..48ccfd9 --- /dev/null +++ b/scripts/dtc/libfdt/fdt.h @@ -0,0 +1,60 @@ +#ifndef _FDT_H +#define _FDT_H + +#ifndef __ASSEMBLY__ + +struct fdt_header { + uint32_t magic; /* magic word FDT_MAGIC */ + uint32_t totalsize; /* total size of DT block */ + uint32_t off_dt_struct; /* offset to structure */ + uint32_t off_dt_strings; /* offset to strings */ + uint32_t off_mem_rsvmap; /* offset to memory reserve map */ + uint32_t version; /* format version */ + uint32_t last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + uint32_t boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + uint32_t size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + uint32_t size_dt_struct; /* size of the structure block */ +}; + +struct fdt_reserve_entry { + uint64_t address; + uint64_t size; +}; + +struct fdt_node_header { + uint32_t tag; + char name[0]; +}; + +struct fdt_property { + uint32_t tag; + uint32_t len; + uint32_t nameoff; + char data[0]; +}; + +#endif /* !__ASSEMBLY */ + +#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ +#define FDT_TAGSIZE sizeof(uint32_t) + +#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ +#define FDT_END_NODE 0x2 /* End node */ +#define FDT_PROP 0x3 /* Property: name off, + size, content */ +#define FDT_NOP 0x4 /* nop */ +#define FDT_END 0x9 + +#define FDT_V1_SIZE (7*sizeof(uint32_t)) +#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) +#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) +#define FDT_V16_SIZE FDT_V3_SIZE +#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) + +#endif /* _FDT_H */ diff --git a/scripts/dtc/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c new file mode 100644 index 0000000..fbbba44 --- /dev/null +++ b/scripts/dtc/libfdt/fdt_ro.c @@ -0,0 +1,469 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +static int _fdt_nodename_eq(const void *fdt, int offset, + const char *s, int len) +{ + const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1); + + if (! p) + /* short match */ + return 0; + + if (memcmp(p, s, len) != 0) + return 0; + + if (p[len] == '\0') + return 1; + else if (!memchr(s, '@', len) && (p[len] == '@')) + return 1; + else + return 0; +} + +const char *fdt_string(const void *fdt, int stroffset) +{ + return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset; +} + +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size) +{ + FDT_CHECK_HEADER(fdt); + *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address); + *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size); + return 0; +} + +int fdt_num_mem_rsv(const void *fdt) +{ + int i = 0; + + while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0) + i++; + return i; +} + +int fdt_subnode_offset_namelen(const void *fdt, int offset, + const char *name, int namelen) +{ + int depth; + + FDT_CHECK_HEADER(fdt); + + for (depth = 0, offset = fdt_next_node(fdt, offset, &depth); + (offset >= 0) && (depth > 0); + offset = fdt_next_node(fdt, offset, &depth)) { + if (depth < 0) + return -FDT_ERR_NOTFOUND; + else if ((depth == 1) + && _fdt_nodename_eq(fdt, offset, name, namelen)) + return offset; + } + + if (offset < 0) + return offset; /* error */ + else + return -FDT_ERR_NOTFOUND; +} + +int fdt_subnode_offset(const void *fdt, int parentoffset, + const char *name) +{ + return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_path_offset(const void *fdt, const char *path) +{ + const char *end = path + strlen(path); + const char *p = path; + int offset = 0; + + FDT_CHECK_HEADER(fdt); + + if (*path != '/') + return -FDT_ERR_BADPATH; + + while (*p) { + const char *q; + + while (*p == '/') + p++; + if (! *p) + return offset; + q = strchr(p, '/'); + if (! q) + q = end; + + offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); + if (offset < 0) + return offset; + + p = q; + } + + return offset; +} + +const char *fdt_get_name(const void *fdt, int nodeoffset, int *len) +{ + const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset); + int err; + + if (((err = fdt_check_header(fdt)) != 0) + || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) + goto fail; + + if (len) + *len = strlen(nh->name); + + return nh->name; + + fail: + if (len) + *len = err; + return NULL; +} + +const struct fdt_property *fdt_get_property(const void *fdt, + int nodeoffset, + const char *name, int *lenp) +{ + uint32_t tag; + const struct fdt_property *prop; + int namestroff; + int offset, nextoffset; + int err; + + if (((err = fdt_check_header(fdt)) != 0) + || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) + goto fail; + + nextoffset = err; + do { + offset = nextoffset; + + tag = fdt_next_tag(fdt, offset, &nextoffset); + switch (tag) { + case FDT_END: + err = -FDT_ERR_TRUNCATED; + goto fail; + + case FDT_BEGIN_NODE: + case FDT_END_NODE: + case FDT_NOP: + break; + + case FDT_PROP: + err = -FDT_ERR_BADSTRUCTURE; + prop = fdt_offset_ptr(fdt, offset, sizeof(*prop)); + if (! prop) + goto fail; + namestroff = fdt32_to_cpu(prop->nameoff); + if (strcmp(fdt_string(fdt, namestroff), name) == 0) { + /* Found it! */ + int len = fdt32_to_cpu(prop->len); + prop = fdt_offset_ptr(fdt, offset, + sizeof(*prop)+len); + if (! prop) + goto fail; + + if (lenp) + *lenp = len; + + return prop; + } + break; + + default: + err = -FDT_ERR_BADSTRUCTURE; + goto fail; + } + } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE)); + + err = -FDT_ERR_NOTFOUND; + fail: + if (lenp) + *lenp = err; + return NULL; +} + +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + const struct fdt_property *prop; + + prop = fdt_get_property(fdt, nodeoffset, name, lenp); + if (! prop) + return NULL; + + return prop->data; +} + +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset) +{ + const uint32_t *php; + int len; + + php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len); + if (!php || (len != sizeof(*php))) + return 0; + + return fdt32_to_cpu(*php); +} + +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen) +{ + int pdepth = 0, p = 0; + int offset, depth, namelen; + const char *name; + + FDT_CHECK_HEADER(fdt); + + if (buflen < 2) + return -FDT_ERR_NOSPACE; + + for (offset = 0, depth = 0; + (offset >= 0) && (offset <= nodeoffset); + offset = fdt_next_node(fdt, offset, &depth)) { + if (pdepth < depth) + continue; /* overflowed buffer */ + + while (pdepth > depth) { + do { + p--; + } while (buf[p-1] != '/'); + pdepth--; + } + + name = fdt_get_name(fdt, offset, &namelen); + if (!name) + return namelen; + if ((p + namelen + 1) <= buflen) { + memcpy(buf + p, name, namelen); + p += namelen; + buf[p++] = '/'; + pdepth++; + } + + if (offset == nodeoffset) { + if (pdepth < (depth + 1)) + return -FDT_ERR_NOSPACE; + + if (p > 1) /* special case so that root path is "/", not "" */ + p--; + buf[p] = '\0'; + return p; + } + } + + if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) + return -FDT_ERR_BADOFFSET; + else if (offset == -FDT_ERR_BADOFFSET) + return -FDT_ERR_BADSTRUCTURE; + + return offset; /* error from fdt_next_node() */ +} + +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth) +{ + int offset, depth; + int supernodeoffset = -FDT_ERR_INTERNAL; + + FDT_CHECK_HEADER(fdt); + + if (supernodedepth < 0) + return -FDT_ERR_NOTFOUND; + + for (offset = 0, depth = 0; + (offset >= 0) && (offset <= nodeoffset); + offset = fdt_next_node(fdt, offset, &depth)) { + if (depth == supernodedepth) + supernodeoffset = offset; + + if (offset == nodeoffset) { + if (nodedepth) + *nodedepth = depth; + + if (supernodedepth > depth) + return -FDT_ERR_NOTFOUND; + else + return supernodeoffset; + } + } + + if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) + return -FDT_ERR_BADOFFSET; + else if (offset == -FDT_ERR_BADOFFSET) + return -FDT_ERR_BADSTRUCTURE; + + return offset; /* error from fdt_next_node() */ +} + +int fdt_node_depth(const void *fdt, int nodeoffset) +{ + int nodedepth; + int err; + + err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth); + if (err) + return (err < 0) ? err : -FDT_ERR_INTERNAL; + return nodedepth; +} + +int fdt_parent_offset(const void *fdt, int nodeoffset) +{ + int nodedepth = fdt_node_depth(fdt, nodeoffset); + + if (nodedepth < 0) + return nodedepth; + return fdt_supernode_atdepth_offset(fdt, nodeoffset, + nodedepth - 1, NULL); +} + +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen) +{ + int offset; + const void *val; + int len; + + FDT_CHECK_HEADER(fdt); + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_getprop(), then if that didn't + * find what we want, we scan over them again making our way + * to the next node. Still it's the easiest to implement + * approach; performance can come later. */ + for (offset = fdt_next_node(fdt, startoffset, NULL); + offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + val = fdt_getprop(fdt, offset, propname, &len); + if (val && (len == proplen) + && (memcmp(val, propval, len) == 0)) + return offset; + } + + return offset; /* error from fdt_next_node() */ +} + +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) +{ + if ((phandle == 0) || (phandle == -1)) + return -FDT_ERR_BADPHANDLE; + phandle = cpu_to_fdt32(phandle); + return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle", + &phandle, sizeof(phandle)); +} + +int _stringlist_contains(const char *strlist, int listlen, const char *str) +{ + int len = strlen(str); + const char *p; + + while (listlen >= len) { + if (memcmp(str, strlist, len+1) == 0) + return 1; + p = memchr(strlist, '\0', listlen); + if (!p) + return 0; /* malformed strlist.. */ + listlen -= (p-strlist) + 1; + strlist = p + 1; + } + return 0; +} + +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible) +{ + const void *prop; + int len; + + prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); + if (!prop) + return len; + if (_stringlist_contains(prop, len, compatible)) + return 0; + else + return 1; +} + +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible) +{ + int offset, err; + + FDT_CHECK_HEADER(fdt); + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_node_check_compatible(), then if + * that didn't find what we want, we scan over them again + * making our way to the next node. Still it's the easiest to + * implement approach; performance can come later. */ + for (offset = fdt_next_node(fdt, startoffset, NULL); + offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + err = fdt_node_check_compatible(fdt, offset, compatible); + if ((err < 0) && (err != -FDT_ERR_NOTFOUND)) + return err; + else if (err == 0) + return offset; + } + + return offset; /* error from fdt_next_node() */ +} diff --git a/scripts/dtc/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c new file mode 100644 index 0000000..8e7ec4c --- /dev/null +++ b/scripts/dtc/libfdt/fdt_rw.c @@ -0,0 +1,463 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +static int _fdt_blocks_misordered(const void *fdt, + int mem_rsv_size, int struct_size) +{ + return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8)) + || (fdt_off_dt_struct(fdt) < + (fdt_off_mem_rsvmap(fdt) + mem_rsv_size)) + || (fdt_off_dt_strings(fdt) < + (fdt_off_dt_struct(fdt) + struct_size)) + || (fdt_totalsize(fdt) < + (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))); +} + +static int _fdt_rw_check_header(void *fdt) +{ + FDT_CHECK_HEADER(fdt); + + if (fdt_version(fdt) < 17) + return -FDT_ERR_BADVERSION; + if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry), + fdt_size_dt_struct(fdt))) + return -FDT_ERR_BADLAYOUT; + if (fdt_version(fdt) > 17) + fdt_set_version(fdt, 17); + + return 0; +} + +#define FDT_RW_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = _fdt_rw_check_header(fdt)) != 0) \ + return err; \ + } + +static inline int _fdt_data_size(void *fdt) +{ + return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); +} + +static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen) +{ + char *p = splicepoint; + char *end = (char *)fdt + _fdt_data_size(fdt); + + if (((p + oldlen) < p) || ((p + oldlen) > end)) + return -FDT_ERR_BADOFFSET; + if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt))) + return -FDT_ERR_NOSPACE; + memmove(p + newlen, p + oldlen, end - p - oldlen); + return 0; +} + +static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p, + int oldn, int newn) +{ + int delta = (newn - oldn) * sizeof(*p); + int err; + err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p)); + if (err) + return err; + fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int _fdt_splice_struct(void *fdt, void *p, + int oldlen, int newlen) +{ + int delta = newlen - oldlen; + int err; + + if ((err = _fdt_splice(fdt, p, oldlen, newlen))) + return err; + + fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int _fdt_splice_string(void *fdt, int newlen) +{ + void *p = (char *)fdt + + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); + int err; + + if ((err = _fdt_splice(fdt, p, 0, newlen))) + return err; + + fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen); + return 0; +} + +static int _fdt_find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); + const char *p; + char *new; + int len = strlen(s) + 1; + int err; + + p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s); + if (p) + /* found it */ + return (p - strtab); + + new = strtab + fdt_size_dt_strings(fdt); + err = _fdt_splice_string(fdt, len); + if (err) + return err; + + memcpy(new, s, len); + return (new - strtab); +} + +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size) +{ + struct fdt_reserve_entry *re; + int err; + + FDT_RW_CHECK_HEADER(fdt); + + re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt)); + err = _fdt_splice_mem_rsv(fdt, re, 0, 1); + if (err) + return err; + + re->address = cpu_to_fdt64(address); + re->size = cpu_to_fdt64(size); + return 0; +} + +int fdt_del_mem_rsv(void *fdt, int n) +{ + struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n); + int err; + + FDT_RW_CHECK_HEADER(fdt); + + if (n >= fdt_num_mem_rsv(fdt)) + return -FDT_ERR_NOTFOUND; + + err = _fdt_splice_mem_rsv(fdt, re, 1, 0); + if (err) + return err; + return 0; +} + +static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name, + int len, struct fdt_property **prop) +{ + int oldlen; + int err; + + *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); + if (! (*prop)) + return oldlen; + + if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen), + FDT_TAGALIGN(len)))) + return err; + + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +static int _fdt_add_property(void *fdt, int nodeoffset, const char *name, + int len, struct fdt_property **prop) +{ + int proplen; + int nextoffset; + int namestroff; + int err; + + if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0) + return nextoffset; + + namestroff = _fdt_find_add_string(fdt, name); + if (namestroff < 0) + return namestroff; + + *prop = _fdt_offset_ptr_w(fdt, nextoffset); + proplen = sizeof(**prop) + FDT_TAGALIGN(len); + + err = _fdt_splice_struct(fdt, *prop, 0, proplen); + if (err) + return err; + + (*prop)->tag = cpu_to_fdt32(FDT_PROP); + (*prop)->nameoff = cpu_to_fdt32(namestroff); + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +int fdt_set_name(void *fdt, int nodeoffset, const char *name) +{ + char *namep; + int oldlen, newlen; + int err; + + FDT_RW_CHECK_HEADER(fdt); + + namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen); + if (!namep) + return oldlen; + + newlen = strlen(name); + + err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1), + FDT_TAGALIGN(newlen+1)); + if (err) + return err; + + memcpy(namep, name, newlen+1); + return 0; +} + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + struct fdt_property *prop; + int err; + + FDT_RW_CHECK_HEADER(fdt); + + err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop); + if (err == -FDT_ERR_NOTFOUND) + err = _fdt_add_property(fdt, nodeoffset, name, len, &prop); + if (err) + return err; + + memcpy(prop->data, val, len); + return 0; +} + +int fdt_delprop(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len, proplen; + + FDT_RW_CHECK_HEADER(fdt); + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + proplen = sizeof(*prop) + FDT_TAGALIGN(len); + return _fdt_splice_struct(fdt, prop, proplen, 0); +} + +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen) +{ + struct fdt_node_header *nh; + int offset, nextoffset; + int nodelen; + int err; + uint32_t tag; + uint32_t *endtag; + + FDT_RW_CHECK_HEADER(fdt); + + offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); + if (offset >= 0) + return -FDT_ERR_EXISTS; + else if (offset != -FDT_ERR_NOTFOUND) + return offset; + + /* Try to place the new node after the parent's properties */ + fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */ + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + } while ((tag == FDT_PROP) || (tag == FDT_NOP)); + + nh = _fdt_offset_ptr_w(fdt, offset); + nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE; + + err = _fdt_splice_struct(fdt, nh, 0, nodelen); + if (err) + return err; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memset(nh->name, 0, FDT_TAGALIGN(namelen+1)); + memcpy(nh->name, name, namelen); + endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE); + *endtag = cpu_to_fdt32(FDT_END_NODE); + + return offset; +} + +int fdt_add_subnode(void *fdt, int parentoffset, const char *name) +{ + return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_del_node(void *fdt, int nodeoffset) +{ + int endoffset; + + FDT_RW_CHECK_HEADER(fdt); + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset), + endoffset - nodeoffset, 0); +} + +static void _fdt_packblocks(const char *old, char *new, + int mem_rsv_size, int struct_size) +{ + int mem_rsv_off, struct_off, strings_off; + + mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8); + struct_off = mem_rsv_off + mem_rsv_size; + strings_off = struct_off + struct_size; + + memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size); + fdt_set_off_mem_rsvmap(new, mem_rsv_off); + + memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size); + fdt_set_off_dt_struct(new, struct_off); + fdt_set_size_dt_struct(new, struct_size); + + memmove(new + strings_off, old + fdt_off_dt_strings(old), + fdt_size_dt_strings(old)); + fdt_set_off_dt_strings(new, strings_off); + fdt_set_size_dt_strings(new, fdt_size_dt_strings(old)); +} + +int fdt_open_into(const void *fdt, void *buf, int bufsize) +{ + int err; + int mem_rsv_size, struct_size; + int newsize; + const char *fdtstart = fdt; + const char *fdtend = fdtstart + fdt_totalsize(fdt); + char *tmp; + + FDT_CHECK_HEADER(fdt); + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + + if (fdt_version(fdt) >= 17) { + struct_size = fdt_size_dt_struct(fdt); + } else { + struct_size = 0; + while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END) + ; + } + + if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) { + /* no further work necessary */ + err = fdt_move(fdt, buf, bufsize); + if (err) + return err; + fdt_set_version(buf, 17); + fdt_set_size_dt_struct(buf, struct_size); + fdt_set_totalsize(buf, bufsize); + return 0; + } + + /* Need to reorder */ + newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size + + struct_size + fdt_size_dt_strings(fdt); + + if (bufsize < newsize) + return -FDT_ERR_NOSPACE; + + /* First attempt to build converted tree at beginning of buffer */ + tmp = buf; + /* But if that overlaps with the old tree... */ + if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) { + /* Try right after the old tree instead */ + tmp = (char *)(uintptr_t)fdtend; + if ((tmp + newsize) > ((char *)buf + bufsize)) + return -FDT_ERR_NOSPACE; + } + + _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size); + memmove(buf, tmp, newsize); + + fdt_set_magic(buf, FDT_MAGIC); + fdt_set_totalsize(buf, bufsize); + fdt_set_version(buf, 17); + fdt_set_last_comp_version(buf, 16); + fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt)); + + return 0; +} + +int fdt_pack(void *fdt) +{ + int mem_rsv_size; + + FDT_RW_CHECK_HEADER(fdt); + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt)); + fdt_set_totalsize(fdt, _fdt_data_size(fdt)); + + return 0; +} diff --git a/scripts/dtc/libfdt/fdt_strerror.c b/scripts/dtc/libfdt/fdt_strerror.c new file mode 100644 index 0000000..e6c3cee --- /dev/null +++ b/scripts/dtc/libfdt/fdt_strerror.c @@ -0,0 +1,96 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +struct fdt_errtabent { + const char *str; +}; + +#define FDT_ERRTABENT(val) \ + [(val)] = { .str = #val, } + +static struct fdt_errtabent fdt_errtable[] = { + FDT_ERRTABENT(FDT_ERR_NOTFOUND), + FDT_ERRTABENT(FDT_ERR_EXISTS), + FDT_ERRTABENT(FDT_ERR_NOSPACE), + + FDT_ERRTABENT(FDT_ERR_BADOFFSET), + FDT_ERRTABENT(FDT_ERR_BADPATH), + FDT_ERRTABENT(FDT_ERR_BADSTATE), + + FDT_ERRTABENT(FDT_ERR_TRUNCATED), + FDT_ERRTABENT(FDT_ERR_BADMAGIC), + FDT_ERRTABENT(FDT_ERR_BADVERSION), + FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE), + FDT_ERRTABENT(FDT_ERR_BADLAYOUT), +}; +#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0])) + +const char *fdt_strerror(int errval) +{ + if (errval > 0) + return ""; + else if (errval == 0) + return ""; + else if (errval > -FDT_ERRTABSIZE) { + const char *s = fdt_errtable[-errval].str; + + if (s) + return s; + } + + return ""; +} diff --git a/scripts/dtc/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c new file mode 100644 index 0000000..698329e --- /dev/null +++ b/scripts/dtc/libfdt/fdt_sw.c @@ -0,0 +1,257 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +static int _fdt_sw_check_header(void *fdt) +{ + if (fdt_magic(fdt) != FDT_SW_MAGIC) + return -FDT_ERR_BADMAGIC; + /* FIXME: should check more details about the header state */ + return 0; +} + +#define FDT_SW_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = _fdt_sw_check_header(fdt)) != 0) \ + return err; \ + } + +static void *_fdt_grab_space(void *fdt, int len) +{ + int offset = fdt_size_dt_struct(fdt); + int spaceleft; + + spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) + - fdt_size_dt_strings(fdt); + + if ((offset + len < offset) || (offset + len > spaceleft)) + return NULL; + + fdt_set_size_dt_struct(fdt, offset + len); + return fdt_offset_ptr_w(fdt, offset, len); +} + +int fdt_create(void *buf, int bufsize) +{ + void *fdt = buf; + + if (bufsize < sizeof(struct fdt_header)) + return -FDT_ERR_NOSPACE; + + memset(buf, 0, bufsize); + + fdt_set_magic(fdt, FDT_SW_MAGIC); + fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); + fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); + fdt_set_totalsize(fdt, bufsize); + + fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header), + sizeof(struct fdt_reserve_entry))); + fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt)); + fdt_set_off_dt_strings(fdt, bufsize); + + return 0; +} + +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) +{ + struct fdt_reserve_entry *re; + int offset; + + FDT_SW_CHECK_HEADER(fdt); + + if (fdt_size_dt_struct(fdt)) + return -FDT_ERR_BADSTATE; + + offset = fdt_off_dt_struct(fdt); + if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) + return -FDT_ERR_NOSPACE; + + re = (struct fdt_reserve_entry *)((char *)fdt + offset); + re->address = cpu_to_fdt64(addr); + re->size = cpu_to_fdt64(size); + + fdt_set_off_dt_struct(fdt, offset + sizeof(*re)); + + return 0; +} + +int fdt_finish_reservemap(void *fdt) +{ + return fdt_add_reservemap_entry(fdt, 0, 0); +} + +int fdt_begin_node(void *fdt, const char *name) +{ + struct fdt_node_header *nh; + int namelen = strlen(name) + 1; + + FDT_SW_CHECK_HEADER(fdt); + + nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen)); + if (! nh) + return -FDT_ERR_NOSPACE; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memcpy(nh->name, name, namelen); + return 0; +} + +int fdt_end_node(void *fdt) +{ + uint32_t *en; + + FDT_SW_CHECK_HEADER(fdt); + + en = _fdt_grab_space(fdt, FDT_TAGSIZE); + if (! en) + return -FDT_ERR_NOSPACE; + + *en = cpu_to_fdt32(FDT_END_NODE); + return 0; +} + +static int _fdt_find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_totalsize(fdt); + const char *p; + int strtabsize = fdt_size_dt_strings(fdt); + int len = strlen(s) + 1; + int struct_top, offset; + + p = _fdt_find_string(strtab - strtabsize, strtabsize, s); + if (p) + return p - strtab; + + /* Add it */ + offset = -strtabsize - len; + struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + if (fdt_totalsize(fdt) + offset < struct_top) + return 0; /* no more room :( */ + + memcpy(strtab + offset, s, len); + fdt_set_size_dt_strings(fdt, strtabsize + len); + return offset; +} + +int fdt_property(void *fdt, const char *name, const void *val, int len) +{ + struct fdt_property *prop; + int nameoff; + + FDT_SW_CHECK_HEADER(fdt); + + nameoff = _fdt_find_add_string(fdt, name); + if (nameoff == 0) + return -FDT_ERR_NOSPACE; + + prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len)); + if (! prop) + return -FDT_ERR_NOSPACE; + + prop->tag = cpu_to_fdt32(FDT_PROP); + prop->nameoff = cpu_to_fdt32(nameoff); + prop->len = cpu_to_fdt32(len); + memcpy(prop->data, val, len); + return 0; +} + +int fdt_finish(void *fdt) +{ + char *p = (char *)fdt; + uint32_t *end; + int oldstroffset, newstroffset; + uint32_t tag; + int offset, nextoffset; + + FDT_SW_CHECK_HEADER(fdt); + + /* Add terminator */ + end = _fdt_grab_space(fdt, sizeof(*end)); + if (! end) + return -FDT_ERR_NOSPACE; + *end = cpu_to_fdt32(FDT_END); + + /* Relocate the string table */ + oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); + newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); + fdt_set_off_dt_strings(fdt, newstroffset); + + /* Walk the structure, correcting string offsets */ + offset = 0; + while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) { + if (tag == FDT_PROP) { + struct fdt_property *prop = + fdt_offset_ptr_w(fdt, offset, sizeof(*prop)); + int nameoff; + + if (! prop) + return -FDT_ERR_BADSTRUCTURE; + + nameoff = fdt32_to_cpu(prop->nameoff); + nameoff += fdt_size_dt_strings(fdt); + prop->nameoff = cpu_to_fdt32(nameoff); + } + offset = nextoffset; + } + + /* Finally, adjust the header */ + fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt)); + fdt_set_magic(fdt, FDT_MAGIC); + return 0; +} diff --git a/scripts/dtc/libfdt/fdt_wip.c b/scripts/dtc/libfdt/fdt_wip.c new file mode 100644 index 0000000..a4652c6 --- /dev/null +++ b/scripts/dtc/libfdt/fdt_wip.c @@ -0,0 +1,145 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + void *propval; + int proplen; + + propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen); + if (! propval) + return proplen; + + if (proplen != len) + return -FDT_ERR_NOSPACE; + + memcpy(propval, val, len); + return 0; +} + +static void _fdt_nop_region(void *start, int len) +{ + uint32_t *p; + + for (p = start; (char *)p < ((char *)start + len); p++) + *p = cpu_to_fdt32(FDT_NOP); +} + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len; + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + _fdt_nop_region(prop, len + sizeof(*prop)); + + return 0; +} + +int _fdt_node_end_offset(void *fdt, int nodeoffset) +{ + int level = 0; + uint32_t tag; + int offset, nextoffset; + + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_END: + return offset; + + case FDT_BEGIN_NODE: + level++; + break; + + case FDT_END_NODE: + level--; + break; + + case FDT_PROP: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (level >= 0); + + return nextoffset; +} + +int fdt_nop_node(void *fdt, int nodeoffset) +{ + int endoffset; + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), + endoffset - nodeoffset); + return 0; +} diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h new file mode 100644 index 0000000..ce80e4f --- /dev/null +++ b/scripts/dtc/libfdt/libfdt.h @@ -0,0 +1,1076 @@ +#ifndef _LIBFDT_H +#define _LIBFDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include + +#define FDT_FIRST_SUPPORTED_VERSION 0x10 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 + /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ +#define FDT_ERR_EXISTS 2 + /* FDT_ERR_EXISTS: Attemped to create a node or property which + * already exists */ +#define FDT_ERR_NOSPACE 3 + /* FDT_ERR_NOSPACE: Operation needed to expand the device + * tree, but its buffer did not have sufficient space to + * contain the expanded tree. Use fdt_open_into() to move the + * device tree to a buffer with more space. */ + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 + /* FDT_ERR_BADOFFSET: Function was passed a structure block + * offset which is out-of-bounds, or which points to an + * unsuitable part of the structure for the operation. */ +#define FDT_ERR_BADPATH 5 + /* FDT_ERR_BADPATH: Function was passed a badly formatted path + * (e.g. missing a leading / for a function which requires an + * absolute path) */ +#define FDT_ERR_BADPHANDLE 6 + /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle + * value. phandle values of 0 and -1 are not permitted. */ +#define FDT_ERR_BADSTATE 7 + /* FDT_ERR_BADSTATE: Function was passed an incomplete device + * tree created by the sequential-write functions, which is + * not sufficiently complete for the requested operation. */ + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 8 + /* FDT_ERR_TRUNCATED: Structure block of the given device tree + * ends without an FDT_END tag. */ +#define FDT_ERR_BADMAGIC 9 + /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a + * device tree at all - it is missing the flattened device + * tree magic number. */ +#define FDT_ERR_BADVERSION 10 + /* FDT_ERR_BADVERSION: Given device tree has a version which + * can't be handled by the requested operation. For + * read-write functions, this may mean that fdt_open_into() is + * required to convert the tree to the expected version. */ +#define FDT_ERR_BADSTRUCTURE 11 + /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt + * structure block or other serious error (e.g. misnested + * nodes, or subnodes preceding properties). */ +#define FDT_ERR_BADLAYOUT 12 + /* FDT_ERR_BADLAYOUT: For read-write functions, the given + * device tree has it's sub-blocks in an order that the + * function can't handle (memory reserve map, then structure, + * then strings). Use fdt_open_into() to reorganize the tree + * into a form suitable for the read-write operations. */ + +/* "Can't happen" error indicating a bug in libfdt */ +#define FDT_ERR_INTERNAL 13 + /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. + * Should never be returned, if it is, it indicates a bug in + * libfdt itself. */ + +#define FDT_ERR_MAX 13 + +/**********************************************************************/ +/* Low-level functions (you probably don't need these) */ +/**********************************************************************/ + +const void *fdt_offset_ptr(const void *fdt, int offset, int checklen); +static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) +{ + return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); + +/**********************************************************************/ +/* Traversal functions */ +/**********************************************************************/ + +int fdt_next_node(const void *fdt, int offset, int *depth); + +/**********************************************************************/ +/* General functions */ +/**********************************************************************/ + +#define fdt_get_header(fdt, field) \ + (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define __fdt_set_hdr(name) \ + static inline void fdt_set_##name(void *fdt, uint32_t val) \ + { \ + struct fdt_header *fdth = fdt; \ + fdth->name = cpu_to_fdt32(val); \ + } +__fdt_set_hdr(magic); +__fdt_set_hdr(totalsize); +__fdt_set_hdr(off_dt_struct); +__fdt_set_hdr(off_dt_strings); +__fdt_set_hdr(off_mem_rsvmap); +__fdt_set_hdr(version); +__fdt_set_hdr(last_comp_version); +__fdt_set_hdr(boot_cpuid_phys); +__fdt_set_hdr(size_dt_strings); +__fdt_set_hdr(size_dt_struct); +#undef __fdt_set_hdr + +/** + * fdt_check_header - sanity check a device tree or possible device tree + * @fdt: pointer to data which might be a flattened device tree + * + * fdt_check_header() checks that the given buffer contains what + * appears to be a flattened device tree with sane information in its + * header. + * + * returns: + * 0, if the buffer appears to contain a valid device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings, as above + */ +int fdt_check_header(const void *fdt); + +/** + * fdt_move - move a device tree around in memory + * @fdt: pointer to the device tree to move + * @buf: pointer to memory where the device is to be moved + * @bufsize: size of the memory space at buf + * + * fdt_move() relocates, if possible, the device tree blob located at + * fdt to the buffer at buf of size bufsize. The buffer may overlap + * with the existing device tree blob at fdt. Therefore, + * fdt_move(fdt, fdt, fdt_totalsize(fdt)) + * should always succeed. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_move(const void *fdt, void *buf, int bufsize); + +/**********************************************************************/ +/* Read-only functions */ +/**********************************************************************/ + +/** + * fdt_string - retrieve a string from the strings block of a device tree + * @fdt: pointer to the device tree blob + * @stroffset: offset of the string within the strings block (native endian) + * + * fdt_string() retrieves a pointer to a single string from the + * strings block of the device tree blob at fdt. + * + * returns: + * a pointer to the string, on success + * NULL, if stroffset is out of bounds + */ +const char *fdt_string(const void *fdt, int stroffset); + +/** + * fdt_num_mem_rsv - retrieve the number of memory reserve map entries + * @fdt: pointer to the device tree blob + * + * Returns the number of entries in the device tree blob's memory + * reservation map. This does not include the terminating 0,0 entry + * or any other (0,0) entries reserved for expansion. + * + * returns: + * the number of entries + */ +int fdt_num_mem_rsv(const void *fdt); + +/** + * fdt_get_mem_rsv - retrieve one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: pointers to 64-bit variables + * + * On success, *address and *size will contain the address and size of + * the n-th reserve map entry from the device tree blob, in + * native-endian format. + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); + +/** + * fdt_subnode_offset_namelen - find a subnode based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_subnode_offset(), but only examine the first + * namelen characters of name for matching the subnode name. This is + * useful for finding subnodes based on a portion of a larger string, + * such as a full path. + */ +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +/** + * fdt_subnode_offset - find a subnode of a given node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_subnode_offset() finds a subnode of the node at structure block + * offset parentoffset with the given name. name may include a unit + * address, in which case fdt_subnode_offset() will find the subnode + * with that unit address, or the unit address may be omitted, in + * which case fdt_subnode_offset() will find an arbitrary subnode + * whose name excluding unit address matches the given name. + * + * returns: + * structure block offset of the requested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +/** + * fdt_path_offset - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * + * fdt_path_offset() finds a node of a given path in the device tree. + * Each path component may omit the unit address portion, but the + * results of this are undefined if any such path component is + * ambiguous (that is if there are multiple nodes at the relevant + * level matching the given component, differentiated only by unit + * address). + * + * returns: + * structure block offset of the node with the requested path (>=0), on success + * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid + * -FDT_ERR_NOTFOUND, if the requested node does not exist + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_path_offset(const void *fdt, const char *path); + +/** + * fdt_get_name - retrieve the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the starting node + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_name() retrieves the name (including unit address) of the + * device tree node at structure block offset nodeoffset. If lenp is + * non-NULL, the length of this name is also returned, in the integer + * pointed to by lenp. + * + * returns: + * pointer to the node's name, on success + * If lenp is non-NULL, *lenp contains the length of that name (>=0) + * NULL, on error + * if lenp is non-NULL *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); + +/** + * fdt_get_property - find a given property in a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property() retrieves a pointer to the fdt_property + * structure within the device tree blob corresponding to the property + * named 'name' of the node at offset nodeoffset. If lenp is + * non-NULL, the length of the property value is also returned, in the + * integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, + const char *name, + int *lenp) +{ + return (struct fdt_property *)(uintptr_t) + fdt_get_property(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_getprop - retrieve the value of a given property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop() retrieves a pointer to the value of the property + * named 'name' of the node at offset nodeoffset (this will be a + * pointer to within the device blob itself, not a copy of the value). + * If lenp is non-NULL, the length of the property value is also + * returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline void *fdt_getprop_w(void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_get_phandle - retrieve the phandle of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the node + * + * fdt_get_phandle() retrieves the phandle of the device tree node at + * structure block offset nodeoffset. + * + * returns: + * the phandle of the node at nodeoffset, on success (!= 0, != -1) + * 0, if the node has no phandle, or another error occurs + */ +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); + +/** + * fdt_get_path - determine the full path of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose path to find + * @buf: character buffer to contain the returned path (will be overwritten) + * @buflen: size of the character buffer at buf + * + * fdt_get_path() computes the full path of the node at offset + * nodeoffset, and records that path in the buffer at buf. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * 0, on success + * buf contains the absolute path of the node at + * nodeoffset, as a NUL-terminated string. + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) + * characters and will not fit in the given buffer. + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); + +/** + * fdt_supernode_atdepth_offset - find a specific ancestor of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * @supernodedepth: depth of the ancestor to find + * @nodedepth: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_supernode_atdepth_offset() finds an ancestor of the given node + * at a specific depth from the root (where the root itself has depth + * 0, its immediate subnodes depth 1 and so forth). So + * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); + * will always return 0, the offset of the root node. If the node at + * nodeoffset has depth D, then: + * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); + * will return nodeoffset itself. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + + * structure block offset of the node at node offset's ancestor + * of depth supernodedepth (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag +* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth); + +/** + * fdt_node_depth - find the depth of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_node_depth() finds the depth of a given node. The root node + * has depth 0, its immediate subnodes depth 1 and so forth. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * depth of the node at nodeoffset (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_depth(const void *fdt, int nodeoffset); + +/** + * fdt_parent_offset - find the parent of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_parent_offset() locates the parent node of a given node (that + * is, it finds the offset of the node which contains the node at + * nodeoffset as a subnode). + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset, *twice*. + * + * returns: + * structure block offset of the parent of the node at nodeoffset + * (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_parent_offset(const void *fdt, int nodeoffset); + +/** + * fdt_node_offset_by_prop_value - find nodes with a given property value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @propname: property name to check + * @propval: property value to search for + * @proplen: length of the value in propval + * + * fdt_node_offset_by_prop_value() returns the offset of the first + * node after startoffset, which has a property named propname whose + * value is of length proplen and has value equal to propval; or if + * startoffset is -1, the very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, + * propval, proplen); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, + * propval, proplen); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen); + +/** + * fdt_node_offset_by_phandle - find the node with a given phandle + * @fdt: pointer to the device tree blob + * @phandle: phandle value + * + * fdt_node_offset_by_phandle() returns the offset of the node + * which has the given phandle value. If there is more than one node + * in the tree with the given phandle (an invalid tree), results are + * undefined. + * + * returns: + * structure block offset of the located node (>= 0), on success + * -FDT_ERR_NOTFOUND, no node with that phandle exists + * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); + +/** + * fdt_node_check_compatible: check a node's compatible property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @compatible: string to match against + * + * + * fdt_node_check_compatible() returns 0 if the given node contains a + * 'compatible' property with the given string as one of its elements, + * it returns non-zero otherwise, or on error. + * + * returns: + * 0, if the node has a 'compatible' property listing the given string + * 1, if the node has a 'compatible' property, but it does not list + * the given string + * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property + * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible); + +/** + * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @compatible: 'compatible' string to match against + * + * fdt_node_offset_by_compatible() returns the offset of the first + * node after startoffset, which has a 'compatible' property which + * lists the given compatible string; or if startoffset is -1, the + * very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible); + +/**********************************************************************/ +/* Write-in-place functions */ +/**********************************************************************/ + +/** + * fdt_setprop_inplace - change a property's value, but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * fdt_setprop_inplace() replaces the value of a given property with + * the data in val, of length len. This function cannot change the + * size of a property, and so will only work if len is equal to the + * current length of the property. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if len is not equal to the property's current length + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_inplace_cell - change the value of a single-cell property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: cell (32-bit integer) value to replace the property with + * + * fdt_setprop_inplace_cell() replaces the value of a given property + * with the 32-bit integer cell value in val, converting val to + * big-endian if necessary. This function cannot change the size of a + * property, and so will only work if the property already exists and + * has length 4. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_nop_property - replace a property with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_nop_property() will replace a given property's representation + * in the blob with FDT_NOP tags, effectively removing it from the + * tree. + * + * This function will alter only the bytes in the blob which contain + * the property, and will not alter or move any other part of the + * tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_nop_node - replace a node (subtree) with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_nop_node() will replace a given node's representation in the + * blob, including all its subnodes, if any, with FDT_NOP tags, + * effectively removing it from the tree. + * + * This function will alter only the bytes in the blob which contain + * the node and its properties and subnodes, and will not alter or + * move any other part of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Sequential write functions */ +/**********************************************************************/ + +int fdt_create(void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_property(fdt, name, &val, sizeof(val)); +} +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); + +/**********************************************************************/ +/* Read-write functions */ +/**********************************************************************/ + +int fdt_open_into(const void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +/** + * fdt_add_mem_rsv - add one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: 64-bit values (native endian) + * + * Adds a reserve map entry to the given blob reserving a region at + * address address of length size. + * + * This function will insert data into the reserve map and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new reservation entry + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); + +/** + * fdt_del_mem_rsv - remove a memory reserve map entry + * @fdt: pointer to the device tree blob + * @n: entry to remove + * + * fdt_del_mem_rsv() removes the n-th memory reserve map entry from + * the blob. + * + * This function will delete data from the reservation table and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there + * are less than n+1 reserve map entries) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_mem_rsv(void *fdt, int n); + +/** + * fdt_set_name - change the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of a node + * @name: name to give the node + * + * fdt_set_name() replaces the name (including unit address, if any) + * of the given node with the given string. NOTE: this function can't + * efficiently check if the new name is unique amongst the given + * node's siblings; results are undefined if this function is invoked + * with a name equal to one of the given node's siblings. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob + * to contain the new name + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_set_name(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_setprop - create or change a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to set the property value to + * @len: length of the property value + * + * fdt_setprop() sets the value of the named property in the given + * node to the given value and length, creating the property if it + * does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_cell - set a property to a single cell value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value for the property (native endian) + * + * fdt_setprop_cell() sets the value of the named property in the + * given node to the given cell value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_setprop_string - set a property to a string value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value for the property + * + * fdt_setprop_string() sets the value of the named property in the + * given node to the given string value (using the length of the + * string to determine the new length of the property), or creates a + * new property with that value if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + +/** + * fdt_delprop - delete a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_del_property() will delete the given property. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_delprop(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_add_subnode_namelen - creates a new node based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_add_subnode(), but use only the first namelen + * characters of name as the name of the new node. This is useful for + * creating subnodes based on a portion of a larger string, such as a + * full path. + */ +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); + +/** + * fdt_add_subnode - creates a new node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_add_subnode() creates a new node as a subnode of the node at + * structure block offset parentoffset, with the given name (which + * should include the unit address, if any). + * + * This function will insert data into the blob, and will therefore + * change the offsets of some existing nodes. + + * returns: + * structure block offset of the created nodeequested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of + * the given name + * -FDT_ERR_NOSPACE, if there is insufficient free space in the + * blob to contain the new node + * -FDT_ERR_NOSPACE + * -FDT_ERR_BADLAYOUT + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); + +/** + * fdt_del_node - delete a node (subtree) + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_del_node() will remove the given node, including all its + * subnodes if any, from the blob. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Debugging / informational functions */ +/**********************************************************************/ + +const char *fdt_strerror(int errval); + +#endif /* _LIBFDT_H */ diff --git a/scripts/dtc/libfdt/libfdt_env.h b/scripts/dtc/libfdt/libfdt_env.h new file mode 100644 index 0000000..449bf60 --- /dev/null +++ b/scripts/dtc/libfdt/libfdt_env.h @@ -0,0 +1,23 @@ +#ifndef _LIBFDT_ENV_H +#define _LIBFDT_ENV_H + +#include +#include +#include + +#define _B(n) ((unsigned long long)((uint8_t *)&x)[n]) +static inline uint32_t fdt32_to_cpu(uint32_t x) +{ + return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3); +} +#define cpu_to_fdt32(x) fdt32_to_cpu(x) + +static inline uint64_t fdt64_to_cpu(uint64_t x) +{ + return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32) + | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7); +} +#define cpu_to_fdt64(x) fdt64_to_cpu(x) +#undef _B + +#endif /* _LIBFDT_ENV_H */ diff --git a/scripts/dtc/libfdt/libfdt_internal.h b/scripts/dtc/libfdt/libfdt_internal.h new file mode 100644 index 0000000..46eb93e --- /dev/null +++ b/scripts/dtc/libfdt/libfdt_internal.h @@ -0,0 +1,95 @@ +#ifndef _LIBFDT_INTERNAL_H +#define _LIBFDT_INTERNAL_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include + +#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE)) + +#define FDT_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = fdt_check_header(fdt)) != 0) \ + return err; \ + } + +uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset); +int _fdt_check_node_offset(const void *fdt, int offset); +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s); +int _fdt_node_end_offset(void *fdt, int nodeoffset); + +static inline const void *_fdt_offset_ptr(const void *fdt, int offset) +{ + return (const char *)fdt + fdt_off_dt_struct(fdt) + offset; +} + +static inline void *_fdt_offset_ptr_w(void *fdt, int offset) +{ + return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset); +} + +static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n) +{ + const struct fdt_reserve_entry *rsv_table = + (const struct fdt_reserve_entry *) + ((const char *)fdt + fdt_off_mem_rsvmap(fdt)); + + return rsv_table + n; +} +static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n) +{ + return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n); +} + +#define FDT_SW_MAGIC (~FDT_MAGIC) + +#endif /* _LIBFDT_INTERNAL_H */ diff --git a/scripts/dtc/livetree.c b/scripts/dtc/livetree.c new file mode 100644 index 0000000..0ca3de5 --- /dev/null +++ b/scripts/dtc/livetree.c @@ -0,0 +1,308 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +/* + * Tree building functions + */ + +struct property *build_property(char *name, struct data val, char *label) +{ + struct property *new = xmalloc(sizeof(*new)); + + new->name = name; + new->val = val; + + new->next = NULL; + + new->label = label; + + return new; +} + +struct property *chain_property(struct property *first, struct property *list) +{ + assert(first->next == NULL); + + first->next = list; + return first; +} + +struct property *reverse_properties(struct property *first) +{ + struct property *p = first; + struct property *head = NULL; + struct property *next; + + while (p) { + next = p->next; + p->next = head; + head = p; + p = next; + } + return head; +} + +struct node *build_node(struct property *proplist, struct node *children) +{ + struct node *new = xmalloc(sizeof(*new)); + struct node *child; + + memset(new, 0, sizeof(*new)); + + new->proplist = reverse_properties(proplist); + new->children = children; + + for_each_child(new, child) { + child->parent = new; + } + + return new; +} + +struct node *name_node(struct node *node, char *name, char * label) +{ + assert(node->name == NULL); + + node->name = name; + + node->label = label; + + return node; +} + +struct node *chain_node(struct node *first, struct node *list) +{ + assert(first->next_sibling == NULL); + + first->next_sibling = list; + return first; +} + +void add_property(struct node *node, struct property *prop) +{ + struct property **p; + + prop->next = NULL; + + p = &node->proplist; + while (*p) + p = &((*p)->next); + + *p = prop; +} + +void add_child(struct node *parent, struct node *child) +{ + struct node **p; + + child->next_sibling = NULL; + child->parent = parent; + + p = &parent->children; + while (*p) + p = &((*p)->next_sibling); + + *p = child; +} + +struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size, + char *label) +{ + struct reserve_info *new = xmalloc(sizeof(*new)); + + new->re.address = address; + new->re.size = size; + + new->next = NULL; + + new->label = label; + + return new; +} + +struct reserve_info *chain_reserve_entry(struct reserve_info *first, + struct reserve_info *list) +{ + assert(first->next == NULL); + + first->next = list; + return first; +} + +struct reserve_info *add_reserve_entry(struct reserve_info *list, + struct reserve_info *new) +{ + struct reserve_info *last; + + new->next = NULL; + + if (! list) + return new; + + for (last = list; last->next; last = last->next) + ; + + last->next = new; + + return list; +} + +struct boot_info *build_boot_info(struct reserve_info *reservelist, + struct node *tree, uint32_t boot_cpuid_phys) +{ + struct boot_info *bi; + + bi = xmalloc(sizeof(*bi)); + bi->reservelist = reservelist; + bi->dt = tree; + bi->boot_cpuid_phys = boot_cpuid_phys; + + return bi; +} + +/* + * Tree accessor functions + */ + +const char *get_unitname(struct node *node) +{ + if (node->name[node->basenamelen] == '\0') + return ""; + else + return node->name + node->basenamelen + 1; +} + +struct property *get_property(struct node *node, const char *propname) +{ + struct property *prop; + + for_each_property(node, prop) + if (streq(prop->name, propname)) + return prop; + + return NULL; +} + +cell_t propval_cell(struct property *prop) +{ + assert(prop->val.len == sizeof(cell_t)); + return fdt32_to_cpu(*((cell_t *)prop->val.val)); +} + +struct node *get_subnode(struct node *node, const char *nodename) +{ + struct node *child; + + for_each_child(node, child) + if (streq(child->name, nodename)) + return child; + + return NULL; +} + +struct node *get_node_by_path(struct node *tree, const char *path) +{ + const char *p; + struct node *child; + + if (!path || ! (*path)) + return tree; + + while (path[0] == '/') + path++; + + p = strchr(path, '/'); + + for_each_child(tree, child) { + if (p && strneq(path, child->name, p-path)) + return get_node_by_path(child, p+1); + else if (!p && streq(path, child->name)) + return child; + } + + return NULL; +} + +struct node *get_node_by_label(struct node *tree, const char *label) +{ + struct node *child, *node; + + assert(label && (strlen(label) > 0)); + + if (tree->label && streq(tree->label, label)) + return tree; + + for_each_child(tree, child) { + node = get_node_by_label(child, label); + if (node) + return node; + } + + return NULL; +} + +struct node *get_node_by_phandle(struct node *tree, cell_t phandle) +{ + struct node *child, *node; + + assert((phandle != 0) && (phandle != -1)); + + if (tree->phandle == phandle) + return tree; + + for_each_child(tree, child) { + node = get_node_by_phandle(child, phandle); + if (node) + return node; + } + + return NULL; +} + +struct node *get_node_by_ref(struct node *tree, const char *ref) +{ + if (ref[0] == '/') + return get_node_by_path(tree, ref); + else + return get_node_by_label(tree, ref); +} + +cell_t get_node_phandle(struct node *root, struct node *node) +{ + static cell_t phandle = 1; /* FIXME: ick, static local */ + + if ((node->phandle != 0) && (node->phandle != -1)) + return node->phandle; + + assert(! get_property(node, "linux,phandle")); + + while (get_node_by_phandle(root, phandle)) + phandle++; + + node->phandle = phandle; + add_property(node, + build_property("linux,phandle", + data_append_cell(empty_data, phandle), + NULL)); + + return node->phandle; +} diff --git a/scripts/dtc/srcpos.c b/scripts/dtc/srcpos.c new file mode 100644 index 0000000..9641b76 --- /dev/null +++ b/scripts/dtc/srcpos.c @@ -0,0 +1,116 @@ +/* + * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +/* + * Like yylineno, this is the current open file pos. + */ + +struct dtc_file *srcpos_file; + +static int dtc_open_one(struct dtc_file *file, + const char *search, + const char *fname) +{ + char *fullname; + + if (search) { + fullname = xmalloc(strlen(search) + strlen(fname) + 2); + + strcpy(fullname, search); + strcat(fullname, "/"); + strcat(fullname, fname); + } else { + fullname = strdup(fname); + } + + file->file = fopen(fullname, "r"); + if (!file->file) { + free(fullname); + return 0; + } + + file->name = fullname; + return 1; +} + + +struct dtc_file *dtc_open_file(const char *fname, + const struct search_path *search) +{ + static const struct search_path default_search = { NULL, NULL, NULL }; + + struct dtc_file *file; + const char *slash; + + file = xmalloc(sizeof(struct dtc_file)); + + slash = strrchr(fname, '/'); + if (slash) { + char *dir = xmalloc(slash - fname + 1); + + memcpy(dir, fname, slash - fname); + dir[slash - fname] = 0; + file->dir = dir; + } else { + file->dir = NULL; + } + + if (streq(fname, "-")) { + file->name = "stdin"; + file->file = stdin; + return file; + } + + if (fname[0] == '/') { + file->file = fopen(fname, "r"); + if (!file->file) + goto fail; + + file->name = strdup(fname); + return file; + } + + if (!search) + search = &default_search; + + while (search) { + if (dtc_open_one(file, search->dir, fname)) + return file; + + if (errno != ENOENT) + goto fail; + + search = search->next; + } + +fail: + die("Couldn't open \"%s\": %s\n", fname, strerror(errno)); +} + +void dtc_close_file(struct dtc_file *file) +{ + if (fclose(file->file)) + die("Error closing \"%s\": %s\n", file->name, strerror(errno)); + + free(file->dir); + free(file); +} diff --git a/scripts/dtc/srcpos.h b/scripts/dtc/srcpos.h new file mode 100644 index 0000000..e17c7c0 --- /dev/null +++ b/scripts/dtc/srcpos.h @@ -0,0 +1,85 @@ +/* + * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +/* + * Augment the standard YYLTYPE with a filenum index into an + * array of all opened filenames. + */ + +#include + +struct dtc_file { + char *dir; + const char *name; + FILE *file; +}; + +#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED) +typedef struct YYLTYPE { + int first_line; + int first_column; + int last_line; + int last_column; + struct dtc_file *file; +} YYLTYPE; + +#define YYLTYPE_IS_DECLARED 1 +#define YYLTYPE_IS_TRIVIAL 1 +#endif + +/* Cater to old parser templates. */ +#ifndef YYID +#define YYID(n) (n) +#endif + +#define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + (Current).file = YYRHSLOC (Rhs, N).file; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + (Current).file = YYRHSLOC (Rhs, 0).file; \ + } \ + while (YYID (0)) + + + +extern void yyerror(char const *); +extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2))); + +extern struct dtc_file *srcpos_file; + +struct search_path { + const char *dir; /* NULL for current directory */ + struct search_path *prev, *next; +}; + +extern struct dtc_file *dtc_open_file(const char *fname, + const struct search_path *search); +extern void dtc_close_file(struct dtc_file *file); diff --git a/scripts/dtc/treesource.c b/scripts/dtc/treesource.c new file mode 100644 index 0000000..ebeb6eb --- /dev/null +++ b/scripts/dtc/treesource.c @@ -0,0 +1,278 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +extern FILE *yyin; +extern int yyparse(void); + +struct boot_info *the_boot_info; +int treesource_error; + +struct boot_info *dt_from_source(const char *fname) +{ + the_boot_info = NULL; + treesource_error = 0; + + srcpos_file = dtc_open_file(fname, NULL); + yyin = srcpos_file->file; + + if (yyparse() != 0) + die("Unable to parse input tree\n"); + + if (treesource_error) + die("Syntax error parsing input tree\n"); + + return the_boot_info; +} + +static void write_prefix(FILE *f, int level) +{ + int i; + + for (i = 0; i < level; i++) + fputc('\t', f); +} + +int isstring(char c) +{ + return (isprint(c) + || (c == '\0') + || strchr("\a\b\t\n\v\f\r", c)); +} + +static void write_propval_string(FILE *f, struct data val) +{ + const char *str = val.val; + int i; + int newchunk = 1; + struct marker *m = val.markers; + + assert(str[val.len-1] == '\0'); + + for (i = 0; i < (val.len-1); i++) { + char c = str[i]; + + if (newchunk) { + while (m && (m->offset <= i)) { + if (m->type == LABEL) { + assert(m->offset == i); + fprintf(f, "%s: ", m->ref); + } + m = m->next; + } + fprintf(f, "\""); + newchunk = 0; + } + + switch (c) { + case '\a': + fprintf(f, "\\a"); + break; + case '\b': + fprintf(f, "\\b"); + break; + case '\t': + fprintf(f, "\\t"); + break; + case '\n': + fprintf(f, "\\n"); + break; + case '\v': + fprintf(f, "\\v"); + break; + case '\f': + fprintf(f, "\\f"); + break; + case '\r': + fprintf(f, "\\r"); + break; + case '\\': + fprintf(f, "\\\\"); + break; + case '\"': + fprintf(f, "\\\""); + break; + case '\0': + fprintf(f, "\", "); + newchunk = 1; + break; + default: + if (isprint(c)) + fprintf(f, "%c", c); + else + fprintf(f, "\\x%02hhx", c); + } + } + fprintf(f, "\""); + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } +} + +static void write_propval_cells(FILE *f, struct data val) +{ + void *propend = val.val + val.len; + cell_t *cp = (cell_t *)val.val; + struct marker *m = val.markers; + + fprintf(f, "<"); + for (;;) { + while (m && (m->offset <= ((char *)cp - val.val))) { + if (m->type == LABEL) { + assert(m->offset == ((char *)cp - val.val)); + fprintf(f, "%s: ", m->ref); + } + m = m->next; + } + + fprintf(f, "0x%x", fdt32_to_cpu(*cp++)); + if ((void *)cp >= propend) + break; + fprintf(f, " "); + } + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } + fprintf(f, ">"); +} + +static void write_propval_bytes(FILE *f, struct data val) +{ + void *propend = val.val + val.len; + const char *bp = val.val; + struct marker *m = val.markers; + + fprintf(f, "["); + for (;;) { + while (m && (m->offset == (bp-val.val))) { + if (m->type == LABEL) + fprintf(f, "%s: ", m->ref); + m = m->next; + } + + fprintf(f, "%02hhx", *bp++); + if ((const void *)bp >= propend) + break; + fprintf(f, " "); + } + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } + fprintf(f, "]"); +} + +static void write_propval(FILE *f, struct property *prop) +{ + int len = prop->val.len; + const char *p = prop->val.val; + struct marker *m = prop->val.markers; + int nnotstring = 0, nnul = 0; + int nnotstringlbl = 0, nnotcelllbl = 0; + int i; + + if (len == 0) { + fprintf(f, ";\n"); + return; + } + + for (i = 0; i < len; i++) { + if (! isstring(p[i])) + nnotstring++; + if (p[i] == '\0') + nnul++; + } + + for_each_marker_of_type(m, LABEL) { + if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0')) + nnotstringlbl++; + if ((m->offset % sizeof(cell_t)) != 0) + nnotcelllbl++; + } + + fprintf(f, " = "); + if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul)) + && (nnotstringlbl == 0)) { + write_propval_string(f, prop->val); + } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) { + write_propval_cells(f, prop->val); + } else { + write_propval_bytes(f, prop->val); + } + + fprintf(f, ";\n"); +} + +static void write_tree_source_node(FILE *f, struct node *tree, int level) +{ + struct property *prop; + struct node *child; + + write_prefix(f, level); + if (tree->label) + fprintf(f, "%s: ", tree->label); + if (tree->name && (*tree->name)) + fprintf(f, "%s {\n", tree->name); + else + fprintf(f, "/ {\n"); + + for_each_property(tree, prop) { + write_prefix(f, level+1); + if (prop->label) + fprintf(f, "%s: ", prop->label); + fprintf(f, "%s", prop->name); + write_propval(f, prop); + } + for_each_child(tree, child) { + fprintf(f, "\n"); + write_tree_source_node(f, child, level+1); + } + write_prefix(f, level); + fprintf(f, "};\n"); +} + + +void dt_to_source(FILE *f, struct boot_info *bi) +{ + struct reserve_info *re; + + fprintf(f, "/dts-v1/;\n\n"); + + for (re = bi->reservelist; re; re = re->next) { + if (re->label) + fprintf(f, "%s: ", re->label); + fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n", + (unsigned long long)re->re.address, + (unsigned long long)re->re.size); + } + + write_tree_source_node(f, bi->dt, 0); +} + diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h new file mode 100644 index 0000000..658ff42 --- /dev/null +++ b/scripts/dtc/version_gen.h @@ -0,0 +1 @@ +#define DTC_VERSION "DTC 1.2.0" -- cgit v0.10.2 From 7fdf523067666b0eaff330f362401ee50ce187c4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 24 Apr 2009 17:32:22 -0400 Subject: NFS: Close page_mkwrite() races Follow up to Nick Piggin's patches to ensure that nfs_vm_page_mkwrite returns with the page lock held, and sets the VM_FAULT_LOCKED flag. See http://bugzilla.kernel.org/show_bug.cgi?id=12913 Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 5a97bcf..ec7e27d 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -517,10 +517,10 @@ static int nfs_vm_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) ret = nfs_updatepage(filp, page, 0, pagelen); out_unlock: + if (!ret) + return VM_FAULT_LOCKED; unlock_page(page); - if (ret) - ret = VM_FAULT_SIGBUS; - return ret; + return VM_FAULT_SIGBUS; } static struct vm_operations_struct nfs_file_vm_ops = { -- cgit v0.10.2 From 548d2de9bd978a4d4e941477500f1ab97aade137 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 10 Apr 2009 17:52:57 +0200 Subject: mmc_block: be prepared for oversized requests The block layer does not support very low sector count restrictions so we need to be prepared to handle bigger requests than we can send directly to the controller. Problem found by Manuel Lauss. Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index fe8041e..b25e9b6 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -254,6 +254,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.data.blocks = req->nr_sectors; /* + * The block layer doesn't support all sector count + * restrictions, so we need to be prepared for too big + * requests. + */ + if (brq.data.blocks > card->host->max_blk_count) + brq.data.blocks = card->host->max_blk_count; + + /* * After a read error, we redo the request one sector at a time * in order to accurately determine which sectors can be read * successfully. -- cgit v0.10.2 From c60a32cd129b1c41f98888b03ba2904406bac8f8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 10 Apr 2009 23:31:10 +0200 Subject: sdhci-pci: bad error handling in probe function The goto unmap is too early, we haven't allocated host or done the request_region(). Found by smatch (http://repo.or.cz/w/smatch.git). [ Second error path fix by Pierre Ossman ] Signed-off-by: Dan Carpenter Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index cd37962..65be279 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -522,8 +522,8 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot)); if (IS_ERR(host)) { - ret = PTR_ERR(host); - goto unmap; + dev_err(&pdev->dev, "cannot allocate host\n"); + return ERR_PTR(PTR_ERR(host)); } slot = sdhci_priv(host); @@ -541,7 +541,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc)); if (ret) { dev_err(&pdev->dev, "cannot request region\n"); - return ERR_PTR(ret); + goto free; } addr = pci_resource_start(pdev, bar); @@ -572,6 +572,8 @@ unmap: release: pci_release_region(pdev, bar); + +free: sdhci_free_host(host); return ERR_PTR(ret); -- cgit v0.10.2 From 79bccc5aefb4e64e651abe04f78c3e6bf8acd6f0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jos=C3=A9=20M=2E=20Fern=C3=A1ndez?= Date: Tue, 10 Mar 2009 02:21:21 +0100 Subject: mmc: increase power up delay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The TI controller on Toshiba Tecra M5 needs more time to power up or the cards will init incorrectly or not at all. Signed-off-by: José M. Fernández Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index fa073ab..2649117 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -706,7 +706,7 @@ static void mmc_power_up(struct mmc_host *host) * This delay should be sufficient to allow the power supply * to reach the minimum voltage. */ - mmc_delay(2); + mmc_delay(10); host->ios.clock = host->f_min; host->ios.power_mode = MMC_POWER_ON; @@ -716,7 +716,7 @@ static void mmc_power_up(struct mmc_host *host) * This delay must be at least 74 clock sizes, or 1 ms, or the * time required to reach a stable voltage. */ - mmc_delay(2); + mmc_delay(10); } static void mmc_power_off(struct mmc_host *host) -- cgit v0.10.2 From 4accfe2577fab83e41db02282570e849f24ddf53 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 10 Apr 2009 23:55:42 +0200 Subject: sdhci: catch ADMA errors We forgot to add the ADMA error bit to the list of data interrupts. Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index f20a834..65c6f99 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -125,7 +125,7 @@ #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ - SDHCI_INT_DATA_END_BIT) + SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR) #define SDHCI_INT_ALL_MASK ((unsigned int)-1) #define SDHCI_ACMD12_ERR 0x3C -- cgit v0.10.2 From 4ea580f1db62c5419e6690878fd61a740f3aae8e Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Fri, 17 Apr 2009 08:44:19 +0530 Subject: mmci: fix crash with debug enabled If MMC debugging is enabled, the mmci driver oopses because the DBG macro uses host->mmc before it is set. Set it earlier. Signed-off-by: Rabin Vincent Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index a663429..36875dc 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -514,6 +514,7 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); + host->mmc = mmc; /* Bits 12 thru 19 is the designer */ host->hw_designer = (dev->periphid >> 12) & 0xff; /* Bits 20 thru 23 is the revison */ @@ -545,7 +546,6 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id) host->mclk = clk_get_rate(host->clk); DBG(host, "eventual mclk rate: %u Hz\n", host->mclk); } - host->mmc = mmc; host->base = ioremap(dev->res.start, SZ_4K); if (!host->base) { ret = -ENOMEM; -- cgit v0.10.2 From 2e058a6fb004a6b6c3eb6a219ae408f83b670598 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 21 Apr 2009 00:14:54 +0530 Subject: mvsdio: fix CONFIG_PM=y build Fix usage of obsolete parameters and functions in the driver's PM callbacks. Signed-off-by: Rabin Vincent Acked-by: Nicolas Pitre Signed-off-by: Pierre Ossman diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index b5c375d..c643d0f 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -825,24 +825,23 @@ static int __exit mvsd_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int mvsd_suspend(struct platform_device *dev, pm_message_t state, - u32 level) +static int mvsd_suspend(struct platform_device *dev, pm_message_t state) { struct mmc_host *mmc = platform_get_drvdata(dev); int ret = 0; - if (mmc && level == SUSPEND_DISABLE) + if (mmc) ret = mmc_suspend_host(mmc, state); return ret; } -static int mvsd_resume(struct platform_device *dev, u32 level) +static int mvsd_resume(struct platform_device *dev) { - struct mmc_host *mmc = platform_dev_get_drvdata(dev); + struct mmc_host *mmc = platform_get_drvdata(dev); int ret = 0; - if (mmc && level == RESUME_ENABLE) + if (mmc) ret = mmc_resume_host(mmc); return ret; -- cgit v0.10.2 From 7d875a02864a35532543897195dfea2235815df8 Mon Sep 17 00:00:00 2001 From: Anders Kaseorg Date: Sun, 3 May 2009 22:02:55 +0200 Subject: kbuild, modpost: fix unexpected non-allocatable section when cross compiling The missing TO_NATIVE(sechdrs[i].sh_flags) was causing many unexpected non-allocatable section warnings when cross-compiling for an architecture with a different endianness. Fix endianness of all the fields in the ELF header and section headers, not just some of them so we are not hit by this anohter time. Signed-off-by: Anders Kaseorg Reported-by: Sean MacLennan Tested-by: Sean MacLennan Signed-off-by: Sam Ravnborg diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 936b6f8..a5c17db 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -384,11 +384,19 @@ static int parse_elf(struct elf_info *info, const char *filename) return 0; } /* Fix endianness in ELF header */ - hdr->e_shoff = TO_NATIVE(hdr->e_shoff); - hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx); - hdr->e_shnum = TO_NATIVE(hdr->e_shnum); - hdr->e_machine = TO_NATIVE(hdr->e_machine); - hdr->e_type = TO_NATIVE(hdr->e_type); + hdr->e_type = TO_NATIVE(hdr->e_type); + hdr->e_machine = TO_NATIVE(hdr->e_machine); + hdr->e_version = TO_NATIVE(hdr->e_version); + hdr->e_entry = TO_NATIVE(hdr->e_entry); + hdr->e_phoff = TO_NATIVE(hdr->e_phoff); + hdr->e_shoff = TO_NATIVE(hdr->e_shoff); + hdr->e_flags = TO_NATIVE(hdr->e_flags); + hdr->e_ehsize = TO_NATIVE(hdr->e_ehsize); + hdr->e_phentsize = TO_NATIVE(hdr->e_phentsize); + hdr->e_phnum = TO_NATIVE(hdr->e_phnum); + hdr->e_shentsize = TO_NATIVE(hdr->e_shentsize); + hdr->e_shnum = TO_NATIVE(hdr->e_shnum); + hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx); sechdrs = (void *)hdr + hdr->e_shoff; info->sechdrs = sechdrs; @@ -402,13 +410,16 @@ static int parse_elf(struct elf_info *info, const char *filename) /* Fix endianness in section headers */ for (i = 0; i < hdr->e_shnum; i++) { - sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type); - sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset); - sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size); - sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link); - sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name); - sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info); - sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr); + sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name); + sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type); + sechdrs[i].sh_flags = TO_NATIVE(sechdrs[i].sh_flags); + sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr); + sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset); + sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size); + sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link); + sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info); + sechdrs[i].sh_addralign = TO_NATIVE(sechdrs[i].sh_addralign); + sechdrs[i].sh_entsize = TO_NATIVE(sechdrs[i].sh_entsize); } /* Find symbol table. */ for (i = 1; i < hdr->e_shnum; i++) { -- cgit v0.10.2 From 028ecebdd83cc4a7f8c7e96e28a5537d2ac98dae Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 3 May 2009 22:17:37 +0200 Subject: kbuild, modpost: fix "unexpected non-allocatable" warning with SUSE gcc Jean reported that he saw one warning for each module like the one below: WARNING: arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.o (.comment.SUSE.OPTs): unexpected non-allocatable section. The warning appeared with the improved version of the check of the flags in the sections. That check already ignored sections named ".comment" - but SUSE store additional info in the comment section and has named it in a SUSE specific way. Therefore modpost failed to ignore the section. The fix is to extend the pattern so we ignore all sections that start with the name ".comment.". Signed-off-by: Sam Ravnborg Reported-by: Jean Delvare Tested-by: Jean Delvare diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index a5c17db..268d457 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -727,7 +727,7 @@ int match(const char *sym, const char * const pat[]) /* sections that we do not want to do full section mismatch check on */ static const char *section_white_list[] = - { ".comment", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL }; + { ".comment*", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL }; /* * This is used to find sections missing the SHF_ALLOC flag. -- cgit v0.10.2 From 4391ed6aa9a38cdfb48addd7a9b24a2ff099b1a7 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 4 May 2009 13:05:26 +0200 Subject: kbuild, modpost: fix unexpected non-allocatable warning with mips mips emit the following debug sections: .mdebug* and .pdr They were included in the check for non-allocatable section and caused modpost to warn. Manuel Lauss suggested to fix this by adding the relevant sections to the list of sections we do not check. Signed-off-by: Sam Ravnborg Reported-by: Manuel Lauss diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 268d457..161b784 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -727,7 +727,17 @@ int match(const char *sym, const char * const pat[]) /* sections that we do not want to do full section mismatch check on */ static const char *section_white_list[] = - { ".comment*", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL }; +{ + ".comment*", + ".debug*", + ".mdebug*", /* alpha, score, mips etc. */ + ".pdr", /* alpha, score, mips etc. */ + ".stab*", + ".note*", + ".got*", + ".toc*", + NULL +}; /* * This is used to find sections missing the SHF_ALLOC flag. -- cgit v0.10.2 From 6da7342ff1c5274c51ada084974668d10f769c16 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 4 May 2009 11:44:38 +0200 Subject: amd-iommu: fix iommu flag masks The feature bits should be set via bitmasks, not via feature IDs. [ Impact: fix feature enabling in newer IOMMU versions ] Signed-off-by: Joerg Roedel LKML-Reference: <20090504102028.GA30307@amd.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 42c33ce..8c0be09 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -49,10 +49,10 @@ #define IVHD_DEV_EXT_SELECT 0x46 #define IVHD_DEV_EXT_SELECT_RANGE 0x47 -#define IVHD_FLAG_HT_TUN_EN 0x00 -#define IVHD_FLAG_PASSPW_EN 0x01 -#define IVHD_FLAG_RESPASSPW_EN 0x02 -#define IVHD_FLAG_ISOC_EN 0x03 +#define IVHD_FLAG_HT_TUN_EN_MASK 0x01 +#define IVHD_FLAG_PASSPW_EN_MASK 0x02 +#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04 +#define IVHD_FLAG_ISOC_EN_MASK 0x08 #define IVMD_FLAG_EXCL_RANGE 0x08 #define IVMD_FLAG_UNITY_MAP 0x01 @@ -569,19 +569,19 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, * First set the recommended feature enable bits from ACPI * into the IOMMU control registers */ - h->flags & IVHD_FLAG_HT_TUN_EN ? + h->flags & IVHD_FLAG_HT_TUN_EN_MASK ? iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) : iommu_feature_disable(iommu, CONTROL_HT_TUN_EN); - h->flags & IVHD_FLAG_PASSPW_EN ? + h->flags & IVHD_FLAG_PASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_PASSPW_EN) : iommu_feature_disable(iommu, CONTROL_PASSPW_EN); - h->flags & IVHD_FLAG_RESPASSPW_EN ? + h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) : iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN); - h->flags & IVHD_FLAG_ISOC_EN ? + h->flags & IVHD_FLAG_ISOC_EN_MASK ? iommu_feature_enable(iommu, CONTROL_ISOC_EN) : iommu_feature_disable(iommu, CONTROL_ISOC_EN); -- cgit v0.10.2 From 6574612fbb34c63117581e68f2231ddce027e41e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 4 May 2009 16:03:21 +0200 Subject: ASoC: Remove BROKEN from mpc5200 kconfig The regression was fixed by commit 3e5b50165fd0be080044586f43fcdd460ed27610, so no need to mark this driver as BROKEN. Signed-off-by: Takashi Iwai diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index e7dd79a1..9fc9082 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -21,7 +21,7 @@ config SND_SOC_MPC8610_HPCD config SND_SOC_MPC5200_I2S tristate "Freescale MPC5200 PSC in I2S mode driver" - depends on PPC_MPC52xx && PPC_BESTCOMM && BROKEN + depends on PPC_MPC52xx && PPC_BESTCOMM select SND_SOC_OF_SIMPLE select PPC_BESTCOMM_GEN_BD help -- cgit v0.10.2 From 0b2febf38a33d7c40fb7bb4a58c113a1fa33c412 Mon Sep 17 00:00:00 2001 From: Hannes Hering Date: Mon, 4 May 2009 11:06:37 -0700 Subject: ehea: fix invalid pointer access This patch fixes an invalid pointer access in case the receive queue holds no pointer to the next skb when the queue is empty. Signed-off-by: Hannes Hering Signed-off-by: Jan-Bernd Themann Signed-off-by: David S. Miller diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 6e317ca..16a4138 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0100" +#define DRV_VERSION "EHEA_0101" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 604c844..b22dab9 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -545,14 +545,17 @@ static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); - - pref = (skb_array[x]->data); - prefetch(pref); - prefetch(pref + EHEA_CACHE_LINE); - prefetch(pref + EHEA_CACHE_LINE * 2); - prefetch(pref + EHEA_CACHE_LINE * 3); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + + pref = (skb_array[x]->data); + prefetch(pref); + prefetch(pref + EHEA_CACHE_LINE); + prefetch(pref + EHEA_CACHE_LINE * 2); + prefetch(pref + EHEA_CACHE_LINE * 3); + } + skb = skb_array[skb_index]; skb_array[skb_index] = NULL; return skb; @@ -569,12 +572,14 @@ static inline struct sk_buff *get_skb_by_index_ll(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); - pref = (skb_array[x]->data); - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + pref = (skb_array[x]->data); + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + } skb = skb_array[wqe_index]; skb_array[wqe_index] = NULL; -- cgit v0.10.2 From 0c266898b42fe4e4e2f9edfc9d3474c10f93aa6a Mon Sep 17 00:00:00 2001 From: Satoru SATOH Date: Mon, 4 May 2009 11:11:01 -0700 Subject: tcp: Fix tcp_prequeue() to get correct rto_min value tcp_prequeue() refers to the constant value (TCP_RTO_MIN) regardless of the actual value might be tuned. The following patches fix this and make tcp_prequeue get the actual value returns from tcp_rto_min(). Signed-off-by: Satoru SATOH Signed-off-by: David S. Miller diff --git a/include/net/tcp.h b/include/net/tcp.h index 1b94b9b..646dbe3 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -41,6 +41,7 @@ #include #include #include +#include #include @@ -530,6 +531,17 @@ static inline void tcp_fast_path_check(struct sock *sk) tcp_fast_path_on(tp); } +/* Compute the actual rto_min value */ +static inline u32 tcp_rto_min(struct sock *sk) +{ + struct dst_entry *dst = __sk_dst_get(sk); + u32 rto_min = TCP_RTO_MIN; + + if (dst && dst_metric_locked(dst, RTAX_RTO_MIN)) + rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN); + return rto_min; +} + /* Compute the actual receive window we are currently advertising. * Rcv_nxt can be after the window if our peer push more data * than the offered window. @@ -895,7 +907,7 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb) wake_up_interruptible(sk->sk_sleep); if (!inet_csk_ack_scheduled(sk)) inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, - (3 * TCP_RTO_MIN) / 4, + (3 * tcp_rto_min(sk)) / 4, TCP_RTO_MAX); } return 1; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index c96a6bb..eec3e6f 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -597,16 +597,6 @@ static void tcp_event_data_recv(struct sock *sk, struct sk_buff *skb) tcp_grow_window(sk, skb); } -static u32 tcp_rto_min(struct sock *sk) -{ - struct dst_entry *dst = __sk_dst_get(sk); - u32 rto_min = TCP_RTO_MIN; - - if (dst && dst_metric_locked(dst, RTAX_RTO_MIN)) - rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN); - return rto_min; -} - /* Called to compute a smoothed rtt estimate. The data fed to this * routine either comes from timestamps, or from segments that were * known _not_ to have been retransmitted [see Karn/Partridge -- cgit v0.10.2 From 35d11680a9d82c93eb92f08f9702b72877427b4a Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Mon, 4 May 2009 20:28:59 +0200 Subject: x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo Commit 7ad728f98162cb1af06a85b2a5fc422dddd4fb78 (cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_t) changed the output of /proc/cpuinfo for siblings: Example on an AMD Phenom: physical id : 0 siblings : 1 core id : 3 cpu cores : 4 Before that commit it was: physical id : 0 siblings : 4 core id : 3 cpu cores : 4 Instead of cpu_core_mask it now uses cpu_sibling_mask to count siblings. This is due to the following hunk of above commit: | --- a/arch/x86/kernel/cpu/proc.c | +++ b/arch/x86/kernel/cpu/proc.c | @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinf | if (c->x86_max_cores * smp_num_siblings > 1) { | seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); | seq_printf(m, "siblings\t: %d\n", | - cpus_weight(per_cpu(cpu_core_map, cpu))); | + cpumask_weight(cpu_sibling_mask(cpu))); | seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); | seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); | seq_printf(m, "apicid\t\t: %d\n", c->apicid); This was a mistake, because the impact line shows that this side-effect was not anticipated: Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y So revert the respective hunk to restore the old behavior. [ Impact: fix sibling-info regression in /proc/cpuinfo ] Signed-off-by: Andreas Herrmann Cc: Rusty Russell LKML-Reference: <20090504182859.GA29045@alberich.amd.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index f93047f..d5e3039 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c, if (c->x86_max_cores * smp_num_siblings > 1) { seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); seq_printf(m, "siblings\t: %d\n", - cpumask_weight(cpu_sibling_mask(cpu))); + cpumask_weight(cpu_core_mask(cpu))); seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); seq_printf(m, "apicid\t\t: %d\n", c->apicid); -- cgit v0.10.2 From 9f722c0978b04acba209f8ca1896ad05814bc3a3 Mon Sep 17 00:00:00 2001 From: Omar Laazimani Date: Mon, 4 May 2009 12:01:43 -0700 Subject: usbnet: CDC EEM support (v5) This introduces a CDC Ethernet Emulation Model (EEM) host side driver to support USB EEM devices. EEM is different from the Ethernet Control Model (ECM) currently supported by the "CDC Ethernet" driver. One key difference is that it doesn't require of USB interface alternate settings to manage interface state; some maldesigned hardware can't handle that part of USB. It also avoids a separate USB interface for control and status updates. [ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet checks, improve fault handling, EEM conformance updates, cleanup ] Signed-off-by: Omar Laazimani Signed-off-by: David Brownell Signed-off-by: David S. Miller diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 8ee2103..dfc6cf7 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -180,6 +180,20 @@ config USB_NET_CDCETHER IEEE 802 "local assignment" bit is set in the address, a "usbX" name is used instead. +config USB_NET_CDC_EEM + tristate "CDC EEM support" + depends on USB_USBNET && EXPERIMENTAL + help + This option supports devices conforming to the Communication Device + Class (CDC) Ethernet Emulation Model, a specification that's easy to + implement in device firmware. The CDC EEM specifications are available + from . + + This driver creates an interface named "ethX", where X depends on + what other networking devices you have in use. However, if the + IEEE 802 "local assignment" bit is set in the address, a "usbX" + name is used instead. + config USB_NET_DM9601 tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" depends on USB_USBNET diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 88a87eeb3..c8aef62 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c new file mode 100644 index 0000000..80e0177 --- /dev/null +++ b/drivers/net/usb/cdc_eem.c @@ -0,0 +1,381 @@ +/* + * USB CDC EEM network interface driver + * Copyright (C) 2009 Oberthur Technologies + * by Omar Laazimani, Olivier Condemine + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* + * This driver is an implementation of the CDC "Ethernet Emulation + * Model" (EEM) specification, which encapsulates Ethernet frames + * for transport over USB using a simpler USB device model than the + * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet"). + * + * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf + * + * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24, + * 2.6.27 and 2.6.30rc2 kernel. + * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel). + * build on 23-April-2009 + */ + +#define EEM_HEAD 2 /* 2 byte header */ + +/*-------------------------------------------------------------------------*/ + +static void eem_linkcmd_complete(struct urb *urb) +{ + dev_kfree_skb(urb->context); + usb_free_urb(urb); +} + +static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb) +{ + struct urb *urb; + int status; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) + goto fail; + + usb_fill_bulk_urb(urb, dev->udev, dev->out, + skb->data, skb->len, eem_linkcmd_complete, skb); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + usb_free_urb(urb); +fail: + dev_kfree_skb(skb); + devwarn(dev, "link cmd failure\n"); + return; + } +} + +static int eem_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status = 0; + + status = usbnet_get_endpoints(dev, intf); + if (status < 0) { + usb_set_intfdata(intf, NULL); + usb_driver_release_interface(driver_of(intf), intf); + return status; + } + + /* no jumbogram (16K) support for now */ + + dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN; + + return 0; +} + +/* + * EEM permits packing multiple Ethernet frames into USB transfers + * (a "bundle"), but for TX we don't try to do that. + */ +static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + struct sk_buff *skb2 = NULL; + u16 len = skb->len; + u32 crc = 0; + int padlen = 0; + + /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is + * zero, stick two bytes of zero length EEM packet on the end. + * Else the framework would add invalid single byte padding, + * since it can't know whether ZLPs will be handled right by + * all the relevant hardware and software. + */ + if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket)) + padlen += 2; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + if ((tailroom >= ETH_FCS_LEN + padlen) + && (headroom >= EEM_HEAD)) + goto done; + + if ((headroom + tailroom) + > (EEM_HEAD + ETH_FCS_LEN + padlen)) { + skb->data = memmove(skb->head + + EEM_HEAD, + skb->data, + skb->len); + skb_set_tail_pointer(skb, len); + goto done; + } + } + + skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags); + if (!skb2) + return NULL; + + dev_kfree_skb_any(skb); + skb = skb2; + +done: + /* we don't use the "no Ethernet CRC" option */ + crc = crc32_le(~0, skb->data, skb->len); + crc = ~crc; + + put_unaligned_le32(crc, skb_put(skb, 4)); + + /* EEM packet header format: + * b0..13: length of ethernet frame + * b14: bmCRC (1 == valid Ethernet CRC) + * b15: bmType (0 == data) + */ + len = skb->len; + put_unaligned_le16(BIT(14) | len, skb_push(skb, 2)); + + /* Bundle a zero length EEM packet if needed */ + if (padlen) + put_unaligned_le16(0, skb_put(skb, 2)); + + return skb; +} + +static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + /* + * Our task here is to strip off framing, leaving skb with one + * data frame for the usbnet framework code to process. But we + * may have received multiple EEM payloads, or command payloads. + * So we must process _everything_ as if it's a header, except + * maybe the last data payload + * + * REVISIT the framework needs updating so that when we consume + * all payloads (the last or only message was a command, or a + * zero length EEM packet) that is not accounted as an rx_error. + */ + do { + struct sk_buff *skb2 = NULL; + u16 header; + u16 len = 0; + + /* incomplete EEM header? */ + if (skb->len < EEM_HEAD) + return 0; + + /* + * EEM packet header format: + * b0..14: EEM type dependant (Data or Command) + * b15: bmType + */ + header = get_unaligned_le16(skb->data); + skb_pull(skb, EEM_HEAD); + + /* + * The bmType bit helps to denote when EEM + * packet is data or command : + * bmType = 0 : EEM data payload + * bmType = 1 : EEM (link) command + */ + if (header & BIT(15)) { + u16 bmEEMCmd; + + /* + * EEM (link) command packet: + * b0..10: bmEEMCmdParam + * b11..13: bmEEMCmd + * b14: bmReserved (must be 0) + * b15: 1 (EEM command) + */ + if (header & BIT(14)) { + devdbg(dev, "reserved command %04x\n", header); + continue; + } + + bmEEMCmd = (header >> 11) & 0x7; + switch (bmEEMCmd) { + + /* Responding to echo requests is mandatory. */ + case 0: /* Echo command */ + len = header & 0x7FF; + + /* bogus command? */ + if (skb->len < len) + return 0; + + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + goto next; + skb_trim(skb2, len); + put_unaligned_le16(BIT(15) | (1 << 11) | len, + skb_push(skb2, 2)); + eem_linkcmd(dev, skb2); + break; + + /* + * Host may choose to ignore hints. + * - suspend: peripheral ready to suspend + * - response: suggest N millisec polling + * - response complete: suggest N sec polling + */ + case 2: /* Suspend hint */ + case 3: /* Response hint */ + case 4: /* Response complete hint */ + continue; + + /* + * Hosts should never receive host-to-peripheral + * or reserved command codes; or responses to an + * echo command we didn't send. + */ + case 1: /* Echo response */ + case 5: /* Tickle */ + default: /* reserved */ + devwarn(dev, "unexpected link command %d\n", + bmEEMCmd); + continue; + } + + } else { + u32 crc, crc2; + int is_last; + + /* zero length EEM packet? */ + if (header == 0) + continue; + + /* + * EEM data packet header : + * b0..13: length of ethernet frame + * b14: bmCRC + * b15: 0 (EEM data) + */ + len = header & 0x3FFF; + + /* bogus EEM payload? */ + if (skb->len < len) + return 0; + + /* bogus ethernet frame? */ + if (len < (ETH_HLEN + ETH_FCS_LEN)) + goto next; + + /* + * Treat the last payload differently: framework + * code expects our "fixup" to have stripped off + * headers, so "skb" is a data packet (or error). + * Else if it's not the last payload, keep "skb" + * for further processing. + */ + is_last = (len == skb->len); + if (is_last) + skb2 = skb; + else { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + return 0; + } + + crc = get_unaligned_le32(skb2->data + + len - ETH_FCS_LEN); + skb_trim(skb2, len - ETH_FCS_LEN); + + /* + * The bmCRC helps to denote when the CRC field in + * the Ethernet frame contains a calculated CRC: + * bmCRC = 1 : CRC is calculated + * bmCRC = 0 : CRC = 0xDEADBEEF + */ + if (header & BIT(14)) + crc2 = ~crc32_le(~0, skb2->data, len); + else + crc2 = 0xdeadbeef; + + if (is_last) + return crc == crc2; + + if (unlikely(crc != crc2)) { + dev->stats.rx_errors++; + dev_kfree_skb_any(skb2); + } else + usbnet_skb_return(dev, skb2); + } + +next: + skb_pull(skb, len); + } while (skb->len); + + return 1; +} + +static const struct driver_info eem_info = { + .description = "CDC EEM Device", + .flags = FLAG_ETHER, + .bind = eem_bind, + .rx_fixup = eem_rx_fixup, + .tx_fixup = eem_tx_fixup, +}; + +/*-------------------------------------------------------------------------*/ + +static const struct usb_device_id products[] = { +{ + USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM, + USB_CDC_PROTO_EEM), + .driver_info = (unsigned long) &eem_info, +}, +{ + /* EMPTY == end of list */ +}, +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver eem_driver = { + .name = "cdc_eem", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, +}; + + +static int __init eem_init(void) +{ + return usb_register(&eem_driver); +} +module_init(eem_init); + +static void __exit eem_exit(void) +{ + usb_deregister(&eem_driver); +} +module_exit(eem_exit); + +MODULE_AUTHOR("Omar Laazimani "); +MODULE_DESCRIPTION("USB CDC EEM"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 3c86ed2..c24124a 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -17,6 +17,7 @@ #define USB_CDC_SUBCLASS_DMM 0x09 #define USB_CDC_SUBCLASS_MDLM 0x0a #define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c #define USB_CDC_PROTO_NONE 0 @@ -28,6 +29,8 @@ #define USB_CDC_ACM_PROTO_AT_CDMA 6 #define USB_CDC_ACM_PROTO_VENDOR 0xff +#define USB_CDC_PROTO_EEM 7 + /*-------------------------------------------------------------------------*/ /* -- cgit v0.10.2 From a67e899cf38ae542d1a028ccd021f9189f76fb74 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 2 May 2009 18:24:06 -0700 Subject: Bluetooth: Fix issue with sysfs handling for connections Due to a semantic changes in flush_workqueue() the current approach of synchronizing the sysfs handling for connections doesn't work anymore. The whole approach is actually fully broken and based on assumptions that are no longer valid. With the introduction of Simple Pairing support, the creation of low-level ACL links got changed. This change invalidates the reason why in the past two independent work queues have been used for adding/removing sysfs devices. The adding of the actual sysfs device is now postponed until the host controller successfully assigns an unique handle to that link. So the real synchronization happens inside the controller and not the host. The only left-over problem is that some internals of the sysfs device handling are not initialized ahead of time. This leaves potential access to invalid data and can cause various NULL pointer dereferences. To fix this a new function makes sure that all sysfs details are initialized when an connection attempt is made. The actual sysfs device is only registered when the connection has been successfully established. To avoid a race condition with the registration, the check if a device is registered has been moved into the removal work. As an extra protection two flush_work() calls are left in place to make sure a previous add/del work has been completed first. Based on a report by Marc Pignat Signed-off-by: Marcel Holtmann Tested-by: Justin P. Mattock Tested-by: Roger Quadros Tested-by: Marc Pignat diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index be5bd71..73aead2 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -457,6 +457,7 @@ int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count); int hci_register_sysfs(struct hci_dev *hdev); void hci_unregister_sysfs(struct hci_dev *hdev); +void hci_conn_init_sysfs(struct hci_conn *conn); void hci_conn_add_sysfs(struct hci_conn *conn); void hci_conn_del_sysfs(struct hci_conn *conn); diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 375f4b4..61309b2 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -248,6 +248,8 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst) if (hdev->notify) hdev->notify(hdev, HCI_NOTIFY_CONN_ADD); + hci_conn_init_sysfs(conn); + tasklet_enable(&hdev->tx_task); return conn; diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index b7c5108..582d887 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -9,7 +9,7 @@ struct class *bt_class = NULL; EXPORT_SYMBOL_GPL(bt_class); -static struct workqueue_struct *bluetooth; +static struct workqueue_struct *bt_workq; static inline char *link_typetostr(int type) { @@ -89,8 +89,8 @@ static void add_conn(struct work_struct *work) { struct hci_conn *conn = container_of(work, struct hci_conn, work_add); - /* ensure previous add/del is complete */ - flush_workqueue(bluetooth); + /* ensure previous del is complete */ + flush_work(&conn->work_del); if (device_add(&conn->dev) < 0) { BT_ERR("Failed to register connection device"); @@ -98,27 +98,6 @@ static void add_conn(struct work_struct *work) } } -void hci_conn_add_sysfs(struct hci_conn *conn) -{ - struct hci_dev *hdev = conn->hdev; - - BT_DBG("conn %p", conn); - - conn->dev.type = &bt_link; - conn->dev.class = bt_class; - conn->dev.parent = &hdev->dev; - - dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); - - dev_set_drvdata(&conn->dev, conn); - - device_initialize(&conn->dev); - - INIT_WORK(&conn->work_add, add_conn); - - queue_work(bluetooth, &conn->work_add); -} - /* * The rfcomm tty device will possibly retain even when conn * is down, and sysfs doesn't support move zombie device, @@ -134,8 +113,11 @@ static void del_conn(struct work_struct *work) struct hci_conn *conn = container_of(work, struct hci_conn, work_del); struct hci_dev *hdev = conn->hdev; - /* ensure previous add/del is complete */ - flush_workqueue(bluetooth); + /* ensure previous add is complete */ + flush_work(&conn->work_add); + + if (!device_is_registered(&conn->dev)) + return; while (1) { struct device *dev; @@ -152,16 +134,40 @@ static void del_conn(struct work_struct *work) hci_dev_put(hdev); } -void hci_conn_del_sysfs(struct hci_conn *conn) +void hci_conn_init_sysfs(struct hci_conn *conn) { + struct hci_dev *hdev = conn->hdev; + BT_DBG("conn %p", conn); - if (!device_is_registered(&conn->dev)) - return; + conn->dev.type = &bt_link; + conn->dev.class = bt_class; + conn->dev.parent = &hdev->dev; + + dev_set_drvdata(&conn->dev, conn); + device_initialize(&conn->dev); + + INIT_WORK(&conn->work_add, add_conn); INIT_WORK(&conn->work_del, del_conn); +} + +void hci_conn_add_sysfs(struct hci_conn *conn) +{ + struct hci_dev *hdev = conn->hdev; + + BT_DBG("conn %p", conn); + + dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); + + queue_work(bt_workq, &conn->work_add); +} + +void hci_conn_del_sysfs(struct hci_conn *conn) +{ + BT_DBG("conn %p", conn); - queue_work(bluetooth, &conn->work_del); + queue_work(bt_workq, &conn->work_del); } static inline char *host_typetostr(int type) @@ -438,13 +444,13 @@ void hci_unregister_sysfs(struct hci_dev *hdev) int __init bt_sysfs_init(void) { - bluetooth = create_singlethread_workqueue("bluetooth"); - if (!bluetooth) + bt_workq = create_singlethread_workqueue("bluetooth"); + if (!bt_workq) return -ENOMEM; bt_class = class_create(THIS_MODULE, "bluetooth"); if (IS_ERR(bt_class)) { - destroy_workqueue(bluetooth); + destroy_workqueue(bt_workq); return PTR_ERR(bt_class); } @@ -453,7 +459,7 @@ int __init bt_sysfs_init(void) void bt_sysfs_cleanup(void) { - destroy_workqueue(bluetooth); + destroy_workqueue(bt_workq); class_destroy(bt_class); } -- cgit v0.10.2 From f83ce3e6b02d5e48b3a43b001390e2b58820389d Mon Sep 17 00:00:00 2001 From: Jake Edge Date: Mon, 4 May 2009 12:51:14 -0600 Subject: proc: avoid information leaks to non-privileged processes By using the same test as is used for /proc/pid/maps and /proc/pid/smaps, only allow processes that can ptrace() a given process to see information that might be used to bypass address space layout randomization (ASLR). These include eip, esp, wchan, and start_stack in /proc/pid/stat as well as the non-symbolic output from /proc/pid/wchan. ASLR can be bypassed by sampling eip as shown by the proof-of-concept code at http://code.google.com/p/fuzzyaslr/ As part of a presentation (http://www.cr0.org/paper/to-jt-linux-alsr-leak.pdf) esp and wchan were also noted as possibly usable information leaks as well. The start_stack address also leaks potentially useful information. Cc: Stable Team Signed-off-by: Jake Edge Acked-by: Arjan van de Ven Acked-by: "Eric W. Biederman" Signed-off-by: Linus Torvalds diff --git a/fs/proc/array.c b/fs/proc/array.c index 7e4877d..725a650 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -80,6 +80,7 @@ #include #include #include +#include #include #include @@ -352,6 +353,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, char state; pid_t ppid = 0, pgid = -1, sid = -1; int num_threads = 0; + int permitted; struct mm_struct *mm; unsigned long long start_time; unsigned long cmin_flt = 0, cmaj_flt = 0; @@ -364,11 +366,14 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, state = *get_task_state(task); vsize = eip = esp = 0; + permitted = ptrace_may_access(task, PTRACE_MODE_READ); mm = get_task_mm(task); if (mm) { vsize = task_vsize(mm); - eip = KSTK_EIP(task); - esp = KSTK_ESP(task); + if (permitted) { + eip = KSTK_EIP(task); + esp = KSTK_ESP(task); + } } get_task_comm(tcomm, task); @@ -424,7 +429,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, unlock_task_sighand(task, &flags); } - if (!whole || num_threads < 2) + if (permitted && (!whole || num_threads < 2)) wchan = get_wchan(task); if (!whole) { min_flt = task->min_flt; @@ -476,7 +481,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, rsslim, mm ? mm->start_code : 0, mm ? mm->end_code : 0, - mm ? mm->start_stack : 0, + (permitted && mm) ? mm->start_stack : 0, esp, eip, /* The signal information here is obsolete. diff --git a/fs/proc/base.c b/fs/proc/base.c index aa763ab..fb45615 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -322,7 +322,10 @@ static int proc_pid_wchan(struct task_struct *task, char *buffer) wchan = get_wchan(task); if (lookup_symbol_name(wchan, symname) < 0) - return sprintf(buffer, "%lu", wchan); + if (!ptrace_may_access(task, PTRACE_MODE_READ)) + return 0; + else + return sprintf(buffer, "%lu", wchan); else return sprintf(buffer, "%s", symname); } -- cgit v0.10.2 From 65c90bca0dba56f60dc4ce2a529140c3cc440f22 Mon Sep 17 00:00:00 2001 From: Stephen Smalley Date: Mon, 4 May 2009 15:43:18 -0400 Subject: selinux: Fix send_sigiotask hook The CRED patch incorrectly converted the SELinux send_sigiotask hook to use the current task SID rather than the target task SID in its permission check, yielding the wrong permission check. This fixes the hook function. Detected by the ltp selinux testsuite and confirmed to correct the test failure. Signed-off-by: Stephen Smalley Signed-off-by: James Morris diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index ba808ef..2fcad7c 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3153,7 +3153,7 @@ static int selinux_file_send_sigiotask(struct task_struct *tsk, struct fown_struct *fown, int signum) { struct file *file; - u32 sid = current_sid(); + u32 sid = task_sid(tsk); u32 perm; struct file_security_struct *fsec; -- cgit v0.10.2 From 815bcc2719c12b6f5b511706e2d19728e07f0b02 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Mon, 4 May 2009 09:03:37 +0000 Subject: bonding: fix alb mode locking regression Fix locking issue in alb MAC address management; removed incorrect locking and replaced with correct locking. This bug was introduced in commit 059fe7a578fba5bbb0fdc0365bfcf6218fa25eb0 ("bonding: Convert locks to _bh, rework alb locking for new locking") Bug reported by Paul Smith , who also tested the fix. Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 553a899..46d312b 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1706,10 +1706,8 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave * Called with RTNL */ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) - __releases(&bond->curr_slave_lock) - __releases(&bond->lock) __acquires(&bond->lock) - __acquires(&bond->curr_slave_lock) + __releases(&bond->lock) { struct bonding *bond = netdev_priv(bond_dev); struct sockaddr *sa = addr; @@ -1745,9 +1743,6 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) } } - write_unlock_bh(&bond->curr_slave_lock); - read_unlock(&bond->lock); - if (swap_slave) { alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave); alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave); @@ -1755,16 +1750,15 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr, bond->alb_info.rlb_enabled); + read_lock(&bond->lock); alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr); if (bond->alb_info.rlb_enabled) { /* inform clients mac address has changed */ rlb_req_update_slave_clients(bond, bond->curr_active_slave); } + read_unlock(&bond->lock); } - read_lock(&bond->lock); - write_lock_bh(&bond->curr_slave_lock); - return 0; } -- cgit v0.10.2 From e151a60ad1faffb6241cf7eb6846353df1f33a32 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Mon, 4 May 2009 11:19:42 +0000 Subject: e1000: fix virtualization bug a recent fix to e1000 (commit 15b2bee2) caused KVM/QEMU/VMware based virtualized e1000 interfaces to begin failing when resetting. This is because the driver in a virtual environment doesn't get to run instructions *AT ALL* when an interrupt is asserted. The interrupt code runs immediately and this recent bug fix allows an interrupt to be possible when the interrupt handler will reject it (due to the new code), when being called from any path in the driver that holds the E1000_RESETTING flag. the driver should use the __E1000_DOWN flag instead of the __E1000_RESETTING flag to prevent interrupt execution while reconfiguring the hardware. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6a46cee..b1419e2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3738,7 +3738,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) + if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is -- cgit v0.10.2 From 4ccc28f725bc2b7b0a3bc27e9c15f4eaf63fb812 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 5 May 2009 08:39:24 +0200 Subject: i2c: Timeouts off by 1 with while (timeout++ < MAX_TIMEOUT); timeout reaches MAX_TIMEOUT + 1 after the loop, so the tests below are off by one. Signed-off-by: Roel Kluin Signed-off-by: Jean Delvare diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 981e080..d108450 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -284,7 +284,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 39066de..d627fce 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -306,7 +306,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 220f4a1..f7d6fe9 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -126,7 +126,7 @@ static int amd756_transaction(struct i2c_adapter *adap) } while ((temp & (GS_HST_STS | GS_SMB_STS)) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp); goto abort; } @@ -143,7 +143,7 @@ static int amd756_transaction(struct i2c_adapter *adap) } while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Completion timeout!\n"); goto abort; } diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 1041184..9d2c5ad 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -237,7 +237,7 @@ static int i801_transaction(int xact) status = inb_p(SMBHSTSTS); } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout >= MAX_TIMEOUT); + result = i801_check_post(status, timeout > MAX_TIMEOUT); if (result < 0) return result; @@ -257,9 +257,9 @@ static void i801_wait_hwpec(void) } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_TIMEOUT)); - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) dev_dbg(&I801_dev->dev, "PEC Timeout!\n"); - } + outb_p(status, SMBHSTSTS); } @@ -344,7 +344,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout >= MAX_TIMEOUT); + result = i801_check_post(status, timeout > MAX_TIMEOUT); if (result < 0) return result; diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index b9c01aa..9f6b8e0 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -112,7 +112,7 @@ static int sch_transaction(void) } while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_err(&sch_adapter.dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 2ff4683..ec11d1c 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -173,7 +173,7 @@ static int nforce2_check_status(struct i2c_adapter *adap) temp = inb_p(NVIDIA_SMB_STS); } while ((!temp) && (timeout++ < MAX_TIMEOUT)); - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); if (smbus->can_abort) nforce2_abort(adap); diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index f320ab2..139f0c7 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -256,7 +256,7 @@ static int sis5595_transaction(struct i2c_adapter *adap) } while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 50c3610..70ca41e 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -173,7 +173,7 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size) } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 7e1594b..8295885 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -132,7 +132,7 @@ static int sis96x_transaction(int size) } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp); result = -ETIMEDOUT; } -- cgit v0.10.2 From 0cdba07bb23cdd3e0d64357ec3d983e6b75e541f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 5 May 2009 08:39:24 +0200 Subject: i2c-algo-bit: Fix timeout test When fetching DDC using i2c algo bit, we were often seeing timeouts before getting valid EDID on a retry. The VESA spec states 2ms is the DDC timeout, so when this translates into 1 jiffie and we are close to the end of the time period, it could return with a timeout less than 2ms. Change this code to use time_after instead of time_after_eq. Signed-off-by: Dave Airlie Signed-off-by: Jean Delvare diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index d420cc5..e25e139 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -104,7 +104,7 @@ static int sclhi(struct i2c_algo_bit_data *adap) * chips may hold it low ("clock stretching") while they * are processing data internally. */ - if (time_after_eq(jiffies, start + adap->timeout)) + if (time_after(jiffies, start + adap->timeout)) return -ETIMEDOUT; cond_resched(); } -- cgit v0.10.2 From 2196d1cf4afab93fb64c2e5b417096e49b661612 Mon Sep 17 00:00:00 2001 From: Enrik Berkhan Date: Tue, 5 May 2009 08:39:25 +0200 Subject: i2c-algo-pca: Let PCA9564 recover from unacked data byte (state 0x30) Currently, the i2c-algo-pca driver does nothing if the chip enters state 0x30 (Data byte in I2CDAT has been transmitted; NOT ACK has been received). Thus, the i2c bus connected to the controller gets stuck afterwards. I have seen this kind of error on a custom board in certain load situations most probably caused by interference or noise. A possible reaction is to let the controller generate a STOP condition. This is documented in the PCA9564 data sheet (2006-09-01) and the same is done for other NACK states as well. Further, state 0x38 isn't handled completely, either. Try to do another START in this case like the data sheet says. As this couldn't be tested, I've added a comment to try to reset the chip if the START doesn't help as suggested by Wolfram Sang. Signed-off-by: Enrik Berkhan Reviewed-by: Wolfram Sang Signed-off-by: Jean Delvare diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 6318f7d..78d42aa 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -287,10 +287,21 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */ DEB2("NOT ACK received after data byte\n"); + pca_stop(adap); goto out; case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */ DEB2("Arbitration lost\n"); + /* + * The PCA9564 data sheet (2006-09-01) says "A + * START condition will be transmitted when the + * bus becomes free (STOP or SCL and SDA high)" + * when the STA bit is set (p. 11). + * + * In case this won't work, try pca_reset() + * instead. + */ + pca_start(adap); goto out; case 0x58: /* Data byte has been received; NOT ACK has been returned */ -- cgit v0.10.2 From 0692698cb7369ea1ce74f3f87f70baf5072f8a37 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 5 May 2009 13:57:52 +0100 Subject: [IA64] xen_domu_defconfig: fix build issues/warnings - drivers/xen/events.c did not compile - xen_setup_hook caused a modpost section warning - the use of u64 (instead of unsigned long long) together with a %llu in drivers/xen/balloon.c caused a compiler warning Signed-off-by: Jan Beulich Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/idle.h b/arch/ia64/include/asm/idle.h new file mode 100644 index 0000000..b768501 --- /dev/null +++ b/arch/ia64/include/asm/idle.h @@ -0,0 +1,7 @@ +#ifndef _ASM_IA64_IDLE_H +#define _ASM_IA64_IDLE_H + +static inline void enter_idle(void) { } +static inline void exit_idle(void) { } + +#endif /* _ASM_IA64_IDLE_H */ diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h index 7324878..b8370c8 100644 --- a/arch/ia64/include/asm/xen/events.h +++ b/arch/ia64/include/asm/xen/events.h @@ -36,14 +36,9 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return !(ia64_psr(regs)->i); } -static inline void xen_do_IRQ(int irq, struct pt_regs *regs) +static inline void handle_irq(int irq, struct pt_regs *regs) { - struct pt_regs *old_regs; - old_regs = set_irq_regs(regs); - irq_enter(); __do_IRQ(irq); - irq_exit(); - set_irq_regs(old_regs); } #define irq_ctx_init(cpu) do { } while (0) diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S index 28fed1f..aff8346 100644 --- a/arch/ia64/xen/xensetup.S +++ b/arch/ia64/xen/xensetup.S @@ -54,8 +54,6 @@ END(startup_xen) #define isBP p3 // are we the Bootstrap Processor? - .text - GLOBAL_ENTRY(xen_setup_hook) mov r8=XEN_PV_DOMAIN_ASM (isBP) movl r9=xen_domain_type;; diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index efa4b36..f5bbd9e 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -513,7 +513,8 @@ static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr char *buf) { return sprintf(buf, "%llu\n", - (u64)balloon_stats.target_pages << PAGE_SHIFT); + (unsigned long long)balloon_stats.target_pages + << PAGE_SHIFT); } static ssize_t store_target(struct sys_device *dev, -- cgit v0.10.2 From a425a638c858fd10370b573bde81df3ba500e271 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 5 May 2009 16:37:17 +0100 Subject: Ignore madvise(MADV_WILLNEED) for hugetlbfs-backed regions madvise(MADV_WILLNEED) forces page cache readahead on a range of memory backed by a file. The assumption is made that the page required is order-0 and "normal" page cache. On hugetlbfs, this assumption is not true and order-0 pages are allocated and inserted into the hugetlbfs page cache. This leaks hugetlbfs page reservations and can cause BUGs to trigger related to corrupted page tables. This patch causes MADV_WILLNEED to be ignored for hugetlbfs-backed regions. Signed-off-by: Mel Gorman Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/mm/madvise.c b/mm/madvise.c index b9ce574..36d6ea2 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -112,6 +112,14 @@ static long madvise_willneed(struct vm_area_struct * vma, if (!file) return -EBADF; + /* + * Page cache readahead assumes page cache pages are order-0 which + * is not the case for hugetlbfs. Do not give a bad return value + * but ignore the advice. + */ + if (vma->vm_flags & VM_HUGETLB) + return 0; + if (file->f_mapping->a_ops->get_xip_mem) { /* no bad return value, but ignore advice */ return 0; -- cgit v0.10.2 From 42beefc0093725ec0f8cea340cc54c36ccaceea0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 6 May 2009 09:04:52 +1000 Subject: drm/r128: fix r128 ioremaps to use ioremap_wc. This should allow r128 to start working again since PAT changes. taken from F-11 kernel. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/r128/r128_cce.c b/drivers/gpu/drm/r128/r128_cce.c index 32de4ce..077c045 100644 --- a/drivers/gpu/drm/r128/r128_cce.c +++ b/drivers/gpu/drm/r128/r128_cce.c @@ -511,9 +511,9 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init) #if __OS_HAS_AGP if (!dev_priv->is_pci) { - drm_core_ioremap(dev_priv->cce_ring, dev); - drm_core_ioremap(dev_priv->ring_rptr, dev); - drm_core_ioremap(dev->agp_buffer_map, dev); + drm_core_ioremap_wc(dev_priv->cce_ring, dev); + drm_core_ioremap_wc(dev_priv->ring_rptr, dev); + drm_core_ioremap_wc(dev->agp_buffer_map, dev); if (!dev_priv->cce_ring->handle || !dev_priv->ring_rptr->handle || !dev->agp_buffer_map->handle) { -- cgit v0.10.2 From 7eccf7b227b6d3b1745b937ce35efc9c27f9b0e5 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 5 May 2009 12:50:02 -0700 Subject: x86, srat: do not register nodes beyond e820 map The mem= option will truncate the memory map at a specified address so it's not possible to register nodes with memory beyond the e820 upper bound. unparse_node() is only called when then node had memory associated with it, although with the mem= option it is no longer addressable. [ Impact: fix boot hang on certain (large) systems ] Reported-by: "Zhang, Yanmin" Signed-off-by: David Rientjes Acked-by: Jack Steiner LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 33c5fa5..0176595 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -361,6 +361,7 @@ static void __init unparse_node(int node) { int i; node_clear(node, nodes_parsed); + node_clear(node, cpu_nodes_parsed); for (i = 0; i < MAX_LOCAL_APIC; i++) { if (apicid_to_node[i] == node) apicid_to_node[i] = NUMA_NO_NODE; -- cgit v0.10.2 From e0e5ea3268db428d19e1c5fa00e6f583861cbdbd Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Mon, 4 May 2009 09:08:26 +0530 Subject: x86: Fix a typo in a printk message [ Impact: printk message cleanup ] Signed-off-by: Nikanth Karthikesan LKML-Reference: <200905040908.27299.knikanth@suse.de> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index 16ae70f..29a0e37 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -216,7 +216,7 @@ int __init get_memcfg_from_srat(void) if (num_memory_chunks == 0) { printk(KERN_WARNING - "could not finy any ACPI SRAT memory areas.\n"); + "could not find any ACPI SRAT memory areas.\n"); goto out_fail; } -- cgit v0.10.2 From 61438766514a2d7f191ce1b3cf6812eabbef4ef7 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 6 May 2009 13:02:19 +0100 Subject: x86: fix boot hang in early_reserve_e820() If the first non-reserved (sub-)range doesn't fit the size requested, an endless loop will be entered. If a range returned from find_e820_area_size() turns out insufficient in size, the range must be skipped before calling the function again. [ Impact: fixes boot hang on some platforms ] Signed-off-by: Jan Beulich Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index ef2c356..0062813 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1074,12 +1074,13 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) u64 addr; u64 start; - start = startt; - while (size < sizet && (start + 1)) + for (start = startt; ; start += size) { start = find_e820_area_size(start, &size, align); - - if (size < sizet) - return 0; + if (!(start + 1)) + return 0; + if (size >= sizet) + break; + } #ifdef CONFIG_X86_32 if (start >= MAXMEM) -- cgit v0.10.2 From 498343967613183611ac37dccb2846496d954c06 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 6 May 2009 13:06:47 +0100 Subject: x86-64: finish cleanup_highmaps()'s job wrt. _brk_end With the introduction of the .brk section, special care must be taken that no unused page table entries remain if _brk_end and _end are separated by a 2M page boundary. cleanup_highmap() runs very early and hence cannot take care of that, hence potential entries needing to be removed past _brk_end must be cleared once the brk allocator has done its job. [ Impact: avoids undesirable TLB aliases ] Signed-off-by: Jan Beulich Signed-off-by: H. Peter Anvin diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index fd3da1d..ae4f7b5 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -304,8 +305,23 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, #endif #ifdef CONFIG_X86_64 - if (!after_bootmem) + if (!after_bootmem && !start) { + pud_t *pud; + pmd_t *pmd; + mmu_cr4_features = read_cr4(); + + /* + * _brk_end cannot change anymore, but it and _end may be + * located on different 2M pages. cleanup_highmap(), however, + * can only consider _end when it runs, so destroy any + * mappings beyond _brk_end here. + */ + pud = pud_offset(pgd_offset_k(_brk_end), _brk_end); + pmd = pmd_offset(pud, _brk_end - 1); + while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1)) + pmd_clear(pmd); + } #endif __flush_tlb_all(); -- cgit v0.10.2 From 6407df5ca54a511054200a1eb23f78f723ca1de4 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Fri, 8 May 2009 10:51:41 +0800 Subject: x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP Tim Starling reported that crashdump will panic with kernel compiled with CONFIG_KEXEC_JUMP due to null pointer deference in machine_kexec_32.c: machine_kexec(), when deferencing kexec_image. Refering to: http://bugzilla.kernel.org/show_bug.cgi?id=13265 This patch fixes the BUG via replacing global variable reference: kexec_image in machine_kexec() with local variable reference: image, which is more appropriate, and will not be null. Same BUG is in machine_kexec_64.c too, so fixed too in the same way. [ Impact: fix crash on kexec ] Reported-by: Tim Starling Signed-off-by: Huang Ying LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com> Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index e7368c1..c1c429d 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -194,7 +194,7 @@ void machine_kexec(struct kimage *image) unsigned int preserve_context); #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) save_processor_state(); #endif @@ -253,7 +253,7 @@ void machine_kexec(struct kimage *image) image->preserve_context); #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) restore_processor_state(); #endif diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 89cea4d..84c3bf2 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -274,7 +274,7 @@ void machine_kexec(struct kimage *image) int save_ftrace_enabled; #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) save_processor_state(); #endif @@ -333,7 +333,7 @@ void machine_kexec(struct kimage *image) image->preserve_context); #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) restore_processor_state(); #endif -- cgit v0.10.2 From 33df4db04a79660150e1948e3296eeb451ac121b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 7 May 2009 11:56:44 -0700 Subject: x86: xen, i386: reserve Xen pagetables The Xen pagetables are no longer implicitly reserved as part of the other i386_start_kernel reservations, so make sure we explicitly reserve them. This prevents them from being released into the general kernel free page pool and reused. [ Impact: fix Xen guest crash ] Also-Bisected-by: Bryan Donlan Signed-off-by: Jeremy Fitzhardinge Cc: Xen-devel Cc: Linus Torvalds LKML-Reference: <4A032EEC.30509@goop.org> Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 9842b12..e25a78e 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1794,6 +1794,11 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir))); + reserve_early(__pa(xen_start_info->pt_base), + __pa(xen_start_info->pt_base + + xen_start_info->nr_pt_frames * PAGE_SIZE), + "XEN PAGETABLES"); + return swapper_pg_dir; } #endif /* CONFIG_X86_64 */ -- cgit v0.10.2