From 4d0e42cc66f4e7e0bf08b29da1ae6ebd60549c4e Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 25 Oct 2012 18:13:11 +0200 Subject: x86: Remove dead hlt_use_halt code The hlt_use_halt function returns always true and there is only one definition of it. The default_idle function can then get ride of the if ... statement and we can remove the else branch. Signed-off-by: Daniel Lezcano Cc: linaro-dev@lists.linaro.org Cc: patches@linaro.org Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1351181591-8710-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index b644e1c..2f99e31 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -306,11 +306,6 @@ void (*pm_idle)(void); EXPORT_SYMBOL(pm_idle); #endif -static inline int hlt_use_halt(void) -{ - return 1; -} - #ifndef CONFIG_SMP static inline void play_dead(void) { @@ -410,28 +405,22 @@ void cpu_idle(void) */ void default_idle(void) { - if (hlt_use_halt()) { - trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id()); - trace_cpu_idle_rcuidle(1, smp_processor_id()); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); + trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id()); + trace_cpu_idle_rcuidle(1, smp_processor_id()); + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; - trace_power_end_rcuidle(smp_processor_id()); - trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); - } else { + if (!need_resched()) + safe_halt(); /* enables interrupts racelessly */ + else local_irq_enable(); - /* loop is done by the caller */ - cpu_relax(); - } + current_thread_info()->status |= TS_POLLING; + trace_power_end_rcuidle(smp_processor_id()); + trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); } #ifdef CONFIG_APM_MODULE EXPORT_SYMBOL(default_idle); -- cgit v0.10.2 From 29c574c0aba8dc0736e19eb9b24aad28cc5c9098 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 26 Nov 2012 14:49:36 -0800 Subject: x86, apic: Cleanup cfg->domain setup for legacy interrupts Issues that need to be handled: * Handle PIC interrupts on any CPU irrespective of the apic mode * In the apic lowest priority logical flat delivery mode, be prepared to handle the interrupt on any CPU irrespective of what the IO-APIC RTE says. * Because of above, when the IO-APIC starts handling the legacy PIC interrupt, use the same vector that is being used by the PIC while programming the corresponding IO-APIC RTE. Start with all the cpu's in the legacy PIC interrupts cfg->domain. By the time IO-APIC starts taking over the PIC interrupts, apic driver model is finalized. So depend on the assign_irq_vector() to update the cfg->domain and retain the same vector that was used by PIC before. For the logical apic flat mode, cfg->domain is updated (during the first call to assign_irq_vector()) to contain all the possible online cpu's (0xff). Vector used for the legacy PIC interrupt doesn't change when the IO-APIC starts handling the interrupt. Any interrupt migration after that doesn't change the cfg->domain or the vector used. For other apic modes like physical mode, cfg->domain is updated (during the first call to assign_irq_vector()) to the boot cpu (cpu-0), with the same vector that is being used by the PIC. When that interrupt is migrated to a different cpu, cfg->domin and the vector assigned will change accordingly. Tested-by: Borislav Petkov Signed-off-by: Suresh Siddha Link: http://lkml.kernel.org/r/1353970176.21070.51.camel@sbsiddha-desk.sc.intel.com Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index c265593..0c1f366 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -234,11 +234,11 @@ int __init arch_early_irq_init(void) zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_KERNEL, node); /* * For legacy IRQ's, start with assigning irq0 to irq15 to - * IRQ0_VECTOR to IRQ15_VECTOR on cpu 0. + * IRQ0_VECTOR to IRQ15_VECTOR for all cpu's. */ if (i < legacy_pic->nr_legacy_irqs) { cfg[i].vector = IRQ0_VECTOR + i; - cpumask_set_cpu(0, cfg[i].domain); + cpumask_setall(cfg[i].domain); } } @@ -1141,7 +1141,8 @@ __assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask) * allocation for the members that are not used anymore. */ cpumask_andnot(cfg->old_domain, cfg->domain, tmp_mask); - cfg->move_in_progress = 1; + cfg->move_in_progress = + cpumask_intersects(cfg->old_domain, cpu_online_mask); cpumask_and(cfg->domain, cfg->domain, tmp_mask); break; } @@ -1172,8 +1173,9 @@ next: current_vector = vector; current_offset = offset; if (cfg->vector) { - cfg->move_in_progress = 1; cpumask_copy(cfg->old_domain, cfg->domain); + cfg->move_in_progress = + cpumask_intersects(cfg->old_domain, cpu_online_mask); } for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask) per_cpu(vector_irq, new_cpu)[vector] = irq; @@ -1241,12 +1243,6 @@ void __setup_vector_irq(int cpu) cfg = irq_get_chip_data(irq); if (!cfg) continue; - /* - * If it is a legacy IRQ handled by the legacy PIC, this cpu - * will be part of the irq_cfg's domain. - */ - if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq)) - cpumask_set_cpu(cpu, cfg->domain); if (!cpumask_test_cpu(cpu, cfg->domain)) continue; @@ -1356,16 +1352,6 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, if (!IO_APIC_IRQ(irq)) return; - /* - * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC - * can handle this irq and the apic driver is finialized at this point, - * update the cfg->domain. - */ - if (irq < legacy_pic->nr_legacy_irqs && - cpumask_equal(cfg->domain, cpumask_of(0))) - apic->vector_allocation_domain(0, cfg->domain, - apic->target_cpus()); - if (assign_irq_vector(irq, cfg, apic->target_cpus())) return; -- cgit v0.10.2 From 28a793892296ca3367193c7a7de1714f80049fd0 Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Sun, 9 Dec 2012 08:21:04 +0000 Subject: x86: Fix the error of using "const" in gen-insn-attr-x86.awk The original version code causes following sparse warnings: arch/x86/lib/inat-tables.c:1080:25: warning: duplicate const arch/x86/lib/inat-tables.c:1095:25: warning: duplicate const arch/x86/lib/inat-tables.c:1118:25: warning: duplicate const for the variables inat_escape_tables, inat_group_tables, and inat_avx_tables in the code generated by gen-insn-attr-x86.awk. The author Masami Hiramutsu says here is to make both the value pointed by the pointers and the pointers itself read-only, so we move the "const" to be after the "*". Signed-off-by: Cong Ding Link: http://lkml.kernel.org/r/20121209082103.GA9181@gmail.com Acked-by: Masami Hiramatsu Signed-off-by: H. Peter Anvin diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk index ddcf39b..e6773dc 100644 --- a/arch/x86/tools/gen-insn-attr-x86.awk +++ b/arch/x86/tools/gen-insn-attr-x86.awk @@ -356,7 +356,7 @@ END { exit 1 # print escape opcode map's array print "/* Escape opcode map array */" - print "const insn_attr_t const *inat_escape_tables[INAT_ESC_MAX + 1]" \ + print "const insn_attr_t * const inat_escape_tables[INAT_ESC_MAX + 1]" \ "[INAT_LSTPFX_MAX + 1] = {" for (i = 0; i < geid; i++) for (j = 0; j < max_lprefix; j++) @@ -365,7 +365,7 @@ END { print "};\n" # print group opcode map's array print "/* Group opcode map array */" - print "const insn_attr_t const *inat_group_tables[INAT_GRP_MAX + 1]"\ + print "const insn_attr_t * const inat_group_tables[INAT_GRP_MAX + 1]"\ "[INAT_LSTPFX_MAX + 1] = {" for (i = 0; i < ggid; i++) for (j = 0; j < max_lprefix; j++) @@ -374,7 +374,7 @@ END { print "};\n" # print AVX opcode map's array print "/* AVX opcode map array */" - print "const insn_attr_t const *inat_avx_tables[X86_VEX_M_MAX + 1]"\ + print "const insn_attr_t * const inat_avx_tables[X86_VEX_M_MAX + 1]"\ "[INAT_LSTPFX_MAX + 1] = {" for (i = 0; i < gaid; i++) for (j = 0; j < max_lprefix; j++) -- cgit v0.10.2