From 4a0312fca6599299bbed944ce09278d90388a3e5 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 13 Jun 2006 13:59:01 +0200 Subject: [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors. Added support for RM200C machines with big endian firmware Added support for RM200-C40 (R5000 support) Signed-off-by: Florian Lohoff Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 138aac4..ecf922e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -693,8 +693,8 @@ config SIBYTE_CRHONE config SNI_RM200_PCI bool "SNI RM200 PCI" - select ARC - select ARC32 + select ARC if CPU_LITTLE_ENDIAN + select ARC32 if CPU_LITTLE_ENDIAN select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select DMA_NONCOHERENT @@ -705,10 +705,13 @@ config SNI_RM200_PCI select I8253 select I8259 select ISA + select SWAP_IO_SPACE if CPU_BIG_ENDIAN select SYS_HAS_CPU_R4X00 + select SYS_HAS_CPU_R5000 + select R5000_CPU_SCACHE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL + select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_LITTLE_ENDIAN help diff --git a/arch/mips/pci/ops-sni.c b/arch/mips/pci/ops-sni.c index 62bdd19..2b0ccd6 100644 --- a/arch/mips/pci/ops-sni.c +++ b/arch/mips/pci/ops-sni.c @@ -47,13 +47,13 @@ static int pcimt_read(struct pci_bus *bus, unsigned int devfn, int reg, switch (size) { case 1: - *val = *(volatile u8 *) (PCIMT_CONFIG_DATA + (reg & 3)); + *val = inb(PCIMT_CONFIG_DATA + (reg & 3)); break; case 2: - *val = *(volatile u16 *) (PCIMT_CONFIG_DATA + (reg & 2)); + *val = inw(PCIMT_CONFIG_DATA + (reg & 2)); break; case 4: - *val = *(volatile u32 *) PCIMT_CONFIG_DATA; + *val = inl(PCIMT_CONFIG_DATA); break; } @@ -70,13 +70,13 @@ static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg, switch (size) { case 1: - *(volatile u8 *) (PCIMT_CONFIG_DATA + (reg & 3)) = val; + outb (val, PCIMT_CONFIG_DATA + (reg & 3)); break; case 2: - *(volatile u16 *) (PCIMT_CONFIG_DATA + (reg & 2)) = val; + outw (val, PCIMT_CONFIG_DATA + (reg & 2)); break; case 4: - *(volatile u32 *) PCIMT_CONFIG_DATA = val; + outl (val, PCIMT_CONFIG_DATA); break; } diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile index 9c7eaa5..a5eb0ad 100644 --- a/arch/mips/sni/Makefile +++ b/arch/mips/sni/Makefile @@ -3,5 +3,6 @@ # obj-y += irq.o pcimt_scache.o reset.o setup.o +obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index 635b904..a050bb6 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -21,8 +21,11 @@ #include #include +#ifdef CONFIG_ARC #include #include +#endif + #include #include #include @@ -72,8 +75,7 @@ static inline void sni_pcimt_detect(void) static void __init sni_display_setup(void) { -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_ARC) struct screen_info *si = &screen_info; DISPLAY_STATUS *di; @@ -88,7 +90,6 @@ static void __init sni_display_setup(void) si->orig_video_points = 16; } #endif -#endif } static struct resource sni_io_resource = { diff --git a/arch/mips/sni/sniprom.c b/arch/mips/sni/sniprom.c new file mode 100644 index 0000000..d1d0f1f --- /dev/null +++ b/arch/mips/sni/sniprom.c @@ -0,0 +1,158 @@ +/* + * Big Endian PROM code for SNI RM machines + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2006 Florian Lohoff (flo@rfc822.org) + * Copyright (C) 2005-2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ + +#include +#include +#include + +#include +#include +#include +#include + +/* special SNI prom calls */ +/* + * This does not exist in all proms - SINIX compares + * the prom env variable "version" against "2.0008" + * or greater. If lesser it tries to probe interesting + * registers + */ +#define PROM_GET_MEMCONF 58 + +#define PROM_VEC (u64 *)CKSEG1ADDR(0x1fc00000) +#define PROM_ENTRY(x) (PROM_VEC + (x)) + + +#undef DEBUG +#ifdef DEBUG +#define DBG_PRINTF(x...) prom_printf(x) +#else +#define DBG_PRINTF(x...) +#endif + +static int *(*__prom_putchar)(int) = (int *(*)(int))PROM_ENTRY(PROM_PUTCHAR); +static char *(*__prom_getenv)(char *) = (char *(*)(char *))PROM_ENTRY(PROM_GETENV); +static void (*__prom_get_memconf)(void *) = (void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF); + +char *prom_getenv (char *s) +{ + return __prom_getenv(s); +} + +void prom_printf(char *fmt, ...) +{ + va_list args; + char ppbuf[1024]; + char *bptr; + + va_start(args, fmt); + vsprintf(ppbuf, fmt, args); + + bptr = ppbuf; + + while (*bptr != 0) { + if (*bptr == '\n') + __prom_putchar('\r'); + + __prom_putchar(*bptr++); + } + va_end(args); +} + +unsigned long prom_free_prom_memory(void) +{ + return 0; +} + +/* + * /proc/cpuinfo system type + * + */ +static const char *systype = "Unknown"; +const char *get_system_type(void) +{ + return systype; +} + +#define SNI_IDPROM_BASE 0xbff00000 +#define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE+0x28) /* Memsize in 16MB quantities */ +#define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE+0x29) /* Board Type */ +#define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE+0x30) /* CPU Type */ + +#define SNI_IDPROM_SIZE 0x1000 + +#ifdef DEBUG +static void sni_idprom_dump(void) +{ + int i; + + prom_printf("SNI IDProm dump (first 128byte):\n"); + for(i=0;i<128;i++) { + if (i%16 == 0) + prom_printf("%04x ", i); + + prom_printf("%02x ", *(unsigned char *) (SNI_IDPROM_BASE+i)); + + if (i%16 == 15) + prom_printf("\n"); + } +} +#endif + +static void sni_mem_init(void ) +{ + int i, memsize; + struct membank { + u32 size; + u32 base; + u32 size2; + u32 pad1; + u32 pad2; + } memconf[8]; + + /* MemSIZE from prom in 16MByte chunks */ + memsize=*((unsigned char *) SNI_IDPROM_MEMSIZE) * 16; + + DBG_PRINTF("IDProm memsize: %lu MByte\n", memsize); + + /* get memory bank layout from prom */ + __prom_get_memconf(&memconf); + + DBG_PRINTF("prom_get_mem_conf memory configuration:\n"); + for(i=0;i<8 && memconf[i].size;i++) { + prom_printf("Bank%d: %08x @ %08x\n", i, + memconf[i].size, memconf[i].base); + add_memory_region(memconf[i].base, memconf[i].size, BOOT_MEM_RAM); + } +} + +void __init prom_init(void) +{ + int argc = fw_arg0; + char **argv = (void *)fw_arg1; + unsigned int sni_brd_type = *(unsigned char *) SNI_IDPROM_BRDTYPE; + int i; + + DBG_PRINTF("Found SNI brdtype %02x\n", sni_brd_type); + +#ifdef DEBUG + sni_idprom_dump(); +#endif + sni_mem_init(); + + /* copy prom cmdline parameters to kernel cmdline */ + for (i = 1; i < argc; i++) { + strcat(arcs_cmdline, argv[i]); + if (i < (argc - 1)) + strcat(arcs_cmdline, " "); + } +} + diff --git a/include/asm-mips/mach-rm200/cpu-feature-overrides.h b/include/asm-mips/mach-rm200/cpu-feature-overrides.h index 91e7cf5..0158783 100644 --- a/include/asm-mips/mach-rm200/cpu-feature-overrides.h +++ b/include/asm-mips/mach-rm200/cpu-feature-overrides.h @@ -35,10 +35,8 @@ #define cpu_has_nofpuex 0 #define cpu_has_64bits 1 -#define cpu_has_subset_pcaches 0 /* No S-cache on R5000 I think ... */ #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 0 /* No S-cache on R5000 I think ... */ #define cpu_has_mips32r1 0 #define cpu_has_mips32r2 0 diff --git a/include/asm-mips/sni.h b/include/asm-mips/sni.h index b3bc698..b9ba54d 100644 --- a/include/asm-mips/sni.h +++ b/include/asm-mips/sni.h @@ -15,9 +15,6 @@ /* * ASIC PCI registers for little endian configuration. */ -#ifndef __MIPSEL__ -#error "Fix me for big endian" -#endif #define PCIMT_UCONF 0xbfff0000 #define PCIMT_IOADTIMEOUT2 0xbfff0008 #define PCIMT_IOMEMCONF 0xbfff0010 @@ -51,9 +48,9 @@ #define PCIMT_PCI_CONF 0xbfff0100 /* - * Data port for the PCI bus. + * Data port for the PCI bus in IO space */ -#define PCIMT_CONFIG_DATA 0xb4000cfc +#define PCIMT_CONFIG_DATA 0x0cfc /* * Board specific registers -- cgit v0.10.2