From 1b6cec8a6910ca08d727898453baad22b0122920 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:15:57 +0900 Subject: ARM: mach-shmobile: Kota2 PINT fix Support PINT on sh73a0 and Kota2 using INTC PINT macros. With this patch applied the Kota2 ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. sh73a0 PINT support is included in 3.2-rc but the Kota2 board code does not make use of this shared code base without this patch. Without this patch kota2 on-board ethernet is broken. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index bd9a784..5e084b9 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -56,7 +56,7 @@ static struct resource smsc9220_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(33), /* PINTA2 @ PORT144 */ + .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */ .flags = IORESOURCE_IRQ, }, }; @@ -317,18 +317,6 @@ static void __init kota2_map_io(void) shmobile_setup_console(); } -#define PINTER0A 0xe69000a0 -#define PINTCR0A 0xe69000b0 - -void __init kota2_init_irq(void) -{ - sh73a0_init_irq(); - - /* setup PINT: enable PINTA2 as active low */ - __raw_writel(1 << 29, PINTER0A); - __raw_writew(2 << 10, PINTCR0A); -} - static void __init kota2_init(void) { sh73a0_pinmux_init(); @@ -447,7 +435,7 @@ struct sys_timer kota2_timer = { MACHINE_START(KOTA2, "kota2") .map_io = kota2_map_io, - .init_irq = kota2_init_irq, + .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = kota2_init, .timer = &kota2_timer, -- cgit v0.10.2 From dcb4ea869877b00fd1c761662bfd9359d15a8c2a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:29:54 +0900 Subject: ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix Fix IRQ support on the Kota2 board. The sh73a0 and the Kota2 board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke Kota2 irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_commo) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (gic_init+0x90/0x2) [] (gic_init+0x90/0x2e4) from [] (sh73a0_init_irq+0x30/0x18) [] (sh73a0_init_irq+0x30/0x184) from [] (init_IRQ+0x14/0x1c) [] (init_IRQ+0x14/0x1c) from [] (start_kernel+0x15c/0x2b8) [] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm Acked-by: Rob Herring Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 5e084b9..53e5e45 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -435,6 +435,7 @@ struct sys_timer kota2_timer = { MACHINE_START(KOTA2, "kota2") .map_io = kota2_map_io, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = kota2_init, -- cgit v0.10.2 From 33661c9e2062865acde9d421c971f1c142cf99ca Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:44:58 +0900 Subject: ARM: mach-shmobile: Kota2 TPU LED platform data This patch updates the Kota2 board support code to use the recently merged TPU LED driver whenever possible. The sh73a0 SoC has 5 TPU hardware blocks each with 4 timer channels which in theory allows a total of 20 LEDs to be controlled by "leds-renesas-tpu" driver instances. The Kota2 board has 4 LEDs connected to GPIO pins that also come with TPU pin functions, so this patch ties up these 4 LEDS and leaves the remaining 3 LEDS for the GPIO based LED driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 53e5e45..f44150b 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -157,10 +158,6 @@ static struct platform_device gpio_keys_device = { #define GPIO_LED(n, g) { .name = n, .gpio = g } static struct gpio_led gpio_leds[] = { - GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */ - GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */ - GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */ - GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */ GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */ GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */ GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */ @@ -179,6 +176,119 @@ static struct platform_device gpio_leds_device = { }, }; +/* TPU LED */ +static struct led_renesas_tpu_config led_renesas_tpu12_pdata = { + .name = "V2513", + .pin_gpio_fn = GPIO_FN_TPU1TO2, + .pin_gpio = GPIO_PORT153, + .channel_offset = 0x90, + .timer_bit = 2, + .max_brightness = 1000, +}; + +static struct resource tpu12_resources[] = { + [0] = { + .name = "TPU12", + .start = 0xe6610090, + .end = 0xe66100b5, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu12_device = { + .name = "leds-renesas-tpu", + .id = 12, + .dev = { + .platform_data = &led_renesas_tpu12_pdata, + }, + .num_resources = ARRAY_SIZE(tpu12_resources), + .resource = tpu12_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu41_pdata = { + .name = "V2514", + .pin_gpio_fn = GPIO_FN_TPU4TO1, + .pin_gpio = GPIO_PORT199, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu41_resources[] = { + [0] = { + .name = "TPU41", + .start = 0xe6640050, + .end = 0xe6640075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu41_device = { + .name = "leds-renesas-tpu", + .id = 41, + .dev = { + .platform_data = &led_renesas_tpu41_pdata, + }, + .num_resources = ARRAY_SIZE(tpu41_resources), + .resource = tpu41_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu21_pdata = { + .name = "V2515", + .pin_gpio_fn = GPIO_FN_TPU2TO1, + .pin_gpio = GPIO_PORT197, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu21_resources[] = { + [0] = { + .name = "TPU21", + .start = 0xe6620050, + .end = 0xe6620075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu21_device = { + .name = "leds-renesas-tpu", + .id = 21, + .dev = { + .platform_data = &led_renesas_tpu21_pdata, + }, + .num_resources = ARRAY_SIZE(tpu21_resources), + .resource = tpu21_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu30_pdata = { + .name = "KEYLED", + .pin_gpio_fn = GPIO_FN_TPU3TO0, + .pin_gpio = GPIO_PORT163, + .channel_offset = 0x10, + .timer_bit = 0, + .max_brightness = 1000, +}; + +static struct resource tpu30_resources[] = { + [0] = { + .name = "TPU30", + .start = 0xe6630010, + .end = 0xe6630035, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu30_device = { + .name = "leds-renesas-tpu", + .id = 30, + .dev = { + .platform_data = &led_renesas_tpu30_pdata, + }, + .num_resources = ARRAY_SIZE(tpu30_resources), + .resource = tpu30_resources, +}; + /* MMCIF */ static struct resource mmcif_resources[] = { [0] = { @@ -291,6 +401,10 @@ static struct platform_device *kota2_devices[] __initdata = { &keysc_device, &gpio_keys_device, &gpio_leds_device, + &leds_tpu12_device, + &leds_tpu41_device, + &leds_tpu21_device, + &leds_tpu30_device, &mmcif_device, &sdhi0_device, &sdhi1_device, diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846b..a56d6c6 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -113,6 +113,12 @@ static struct clk main_clk = { .ops = &main_clk_ops, }; +/* Divide Main clock by two */ +static struct clk main_div2_clk = { + .ops = &div2_clk_ops, + .parent = &main_clk, +}; + /* PLL0, PLL1, PLL2, PLL3 */ static unsigned long pll_recalc(struct clk *clk) { @@ -181,6 +187,7 @@ static struct clk *main_clks[] = { &extal1_div2_clk, &extal2_div2_clk, &main_clk, + &main_div2_clk, &pll0_clk, &pll1_clk, &pll2_clk, @@ -268,6 +275,7 @@ enum { MSTP001, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, MSTP314, MSTP313, MSTP312, MSTP311, + MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -301,6 +309,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */ + [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */ + [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */ + [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */ + [MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ @@ -350,6 +362,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ + CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ + CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ -- cgit v0.10.2 From eded9143151a116753b1d8e893bc2d37f8687e0b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:31:40 +0900 Subject: ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix Fix IRQ support on the AG5EVM board. The sh73a0 and the AG5EVM board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke AG5EVM irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_commo) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (gic_init+0x90/0x2) [] (gic_init+0x90/0x2e4) from [] (sh73a0_init_irq+0x30/0x18) [] (sh73a0_init_irq+0x30/0x184) from [] (init_IRQ+0x14/0x1c) [] (init_IRQ+0x14/0x1c) from [] (start_kernel+0x15c/0x2b8) [] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm Acked-by: Rob Herring Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index b862e9f..7119b87 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -607,6 +607,7 @@ struct sys_timer ag5evm_timer = { MACHINE_START(AG5EVM, "ag5evm") .map_io = ag5evm_map_io, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = ag5evm_init, -- cgit v0.10.2 From 9bcc0a5d0de137b3a154dc951c5ff70dce815879 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:23:17 +0900 Subject: ARM: mach-shmobile: SH73A0 external Ethernet fix Keep the ZB clock enabled on sh73a0 to allow the BSC to access external peripherals hooked up to CS signals. This is needed to unbreak Ethernet support on sh73a0 boards such as AG5EVM and Kota2 together with the following patch: 794d78f drivers: sh: late disabling of clocks V2 Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846b..84fd33c 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -243,7 +243,7 @@ static struct clk div6_clks[DIV6_NR] = { [DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0), [DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0), [DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0), - [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0), + [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, CLK_ENABLE_ON_INIT), [DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0), [DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0), [DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0), -- cgit v0.10.2