From b9b52918abe88d9135dd570fb394b9c432eb1cfd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 12 Jun 2012 10:49:51 +0100 Subject: ARM: 7422/1: mmc: mmci: Allocate platform memory during Device Tree boot When booting with Device Tree enabled, platform specific information is gathered by parsing the DT binary. Platform data is subsequently populated with the result. The memory required for this is not automatically allocated during Device Tree boot, so we'll do it here instead. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Russell King diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index f0fcce4..0045ee0 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1276,6 +1276,12 @@ static int __devinit mmci_probe(struct amba_device *dev, return -EINVAL; } + if (!plat) { + plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + } + if (np) mmci_dt_populate_generic_pdata(np, plat); -- cgit v0.10.2 From 2307574a50dcb0f9c13e541ca3a196f7554af977 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 12 Jun 2012 12:31:43 +0100 Subject: ARM: 7423/1: kprobes: run t32_simulate_ldr_literal() without insn slot t32_simulate_ldr_literal() can be run without an instruction slot, so it should be using DECODE_SIMULATEX instead of DECODE_EMULATEX. Acked-by: Jon Medhurst Signed-off-by: Rabin Vincent Signed-off-by: Russell King diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c index 8f96ec7..6123daf 100644 --- a/arch/arm/kernel/kprobes-thumb.c +++ b/arch/arm/kernel/kprobes-thumb.c @@ -660,7 +660,7 @@ static const union decode_item t32_table_1111_100x[] = { /* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */ /* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */ /* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */ - DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, + DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, REGS(PC, NOSPPCX, 0, 0, 0)), /* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */ -- cgit v0.10.2 From 2bea29b774ccb4bf32c7b299c677fccc5a1d8443 Mon Sep 17 00:00:00 2001 From: Mircea Gherzan Date: Mon, 11 Jun 2012 23:52:25 +0100 Subject: ARM: 7421/1: bpf_jit: BPF_S_ANC_ALU_XOR_X support JIT support for the XOR operation introduced by the commit ffe06c17afbb. Signed-off-by: Mircea Gherzan Signed-off-by: Russell King diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 62135849..c641fb6 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -762,6 +762,11 @@ b_epilogue: update_on_xread(ctx); emit(ARM_MOV_R(r_A, r_X), ctx); break; + case BPF_S_ANC_ALU_XOR_X: + /* A ^= X */ + update_on_xread(ctx); + emit(ARM_EOR_R(r_A, r_A, r_X), ctx); + break; case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol) */ ctx->seen |= SEEN_SKB; diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index 99ae5e3..7fa2f7d 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h @@ -68,6 +68,8 @@ #define ARM_INST_CMP_R 0x01500000 #define ARM_INST_CMP_I 0x03500000 +#define ARM_INST_EOR_R 0x00200000 + #define ARM_INST_LDRB_I 0x05d00000 #define ARM_INST_LDRB_R 0x07d00000 #define ARM_INST_LDRH_I 0x01d000b0 @@ -132,6 +134,8 @@ #define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm) #define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm) +#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm) + #define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \ | (off)) #define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \ -- cgit v0.10.2 From 667d1b48bcb66b89776ebefbaf05b358bc5907ce Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 15 Jun 2012 16:49:58 +0100 Subject: ARM: 7425/1: extable: ensure fixup entries are 4-byte aligned Fixup entries in the kernel exception tables should be 4-byte aligned since we return directly to them when handling a faulting instruction in the kernel. This patch adds the missing align directives to the fixup entries. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 7be5469..e42cf59 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -19,6 +19,7 @@ " .long 1b, 4f, 2b, 4f\n" \ " .popsection\n" \ " .pushsection .fixup,\"ax\"\n" \ + " .align 2\n" \ "4: mov %0, " err_reg "\n" \ " b 3b\n" \ " .popsection" diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 437f0c4..0d1851c 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -495,6 +495,7 @@ ENDPROC(__und_usr) * The out of line fixup for the ldrt above. */ .pushsection .fixup, "ax" + .align 2 4: mov pc, r9 .popsection .pushsection __ex_table,"a" -- cgit v0.10.2 From f43380981716c9b48bf2809e4cd1cb0c6b71429d Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 17 Jun 2012 21:13:34 +0100 Subject: ARM: 7426/1: mmc: mmci: Remove wrong error handling of gpio 0 Zero is a valid GPIO and shouldn't be handled as an error return code from of_get_named_gpio(). It was a leftover from old code before getting pdata->gpio_*() was modified. Signed-off-by: Roland Stigge Acked-by: Linus Walleij Signed-off-by: Russell King diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 0045ee0..78d3e48 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1216,12 +1216,7 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np, int bus_width = 0; pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0); - if (!pdata->gpio_wp) - pdata->gpio_wp = -1; - pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0); - if (!pdata->gpio_cd) - pdata->gpio_cd = -1; if (of_get_property(np, "cd-inverted", NULL)) pdata->cd_invert = true; -- cgit v0.10.2 From 2805b9ab7c836cfbe01e86129983e36205078cb2 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 17 Jun 2012 21:14:27 +0100 Subject: ARM: 7427/1: mmc: mmci: Defer probe() in case of yet uninitialized GPIOs If the GPIOs used by the MMCI driver are not registered yet when the driver is probe()d, they can't be used. This happens if the mmci driver is probed before the respective GPIO controller (e.g. on the LPC32xx EA3250 board, the PCA9532 GPIO controller would be initialized via DT after mmci). Therefore, we defer mmci in this case. Signed-off-by: Roland Stigge Acked-by: Linus Walleij Signed-off-by: Russell King diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 78d3e48..50ff19a 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1425,6 +1425,10 @@ static int __devinit mmci_probe(struct amba_device *dev, writel(0, host->base + MMCIMASK1); writel(0xfff, host->base + MMCICLEAR); + if (plat->gpio_cd == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio_cd; + } if (gpio_is_valid(plat->gpio_cd)) { ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)"); if (ret == 0) @@ -1448,6 +1452,10 @@ static int __devinit mmci_probe(struct amba_device *dev, if (ret >= 0) host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); } + if (plat->gpio_wp == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio_wp; + } if (gpio_is_valid(plat->gpio_wp)) { ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)"); if (ret == 0) -- cgit v0.10.2 From 10aa5a35e34fb00a2dd814447199f08756eb307b Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 18 Jun 2012 11:27:04 +0100 Subject: SPI: fix over-eager devm_xxx() conversion 1a77b127ae (OMAP : SPI : use devm_* functions) converted the SPI device controller state to use devm_kzalloc(). Unfortunately, this is used against an unbound struct device, which results in the following when the device is bound to its driver: ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/drivers/base/dd.c:257 driver_probe_device+0x78/0x21c() Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c) r7:00000000 r6:c01ff28c r5:c040050c r4:00000101 [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x58/0x70) [] (warn_slowpath_common+0x0/0x70) from [] (warn_slowpath_null+0x24/0x2c) [] (warn_slowpath_null+0x0/0x2c) from [] (driver_probe_device+0x78/0x21c) [] (driver_probe_device+0x0/0x21c) from [] (__driver_attach+0x6c/0x90) [] (__driver_attach+0x0/0x90) from [] (bus_for_each_dev+0x58/0x98) [] (bus_for_each_dev+0x0/0x98) from [] (driver_attach+0x20/0x28) [] (driver_attach+0x0/0x28) from [] (bus_add_driver+0xb4/0x230) [] (bus_add_driver+0x0/0x230) from [] (driver_register+0xac/0x138) [] (driver_register+0x0/0x138) from [] (spi_register_driver+0x4c/0x60) [] (spi_register_driver+0x0/0x60) from [] (ks8851_init+0x14/0x1c) [] (ks8851_init+0x0/0x1c) from [] (do_one_initcall+0x9c/0x164) [] (do_one_initcall+0x0/0x164) from [] (kernel_init+0x128/0x210) [] (kernel_init+0x0/0x210) from [] (do_exit+0x0/0x72c) ---[ end trace 4dcda79f5e89dd84 ]--- ks8851 spi1.0: message enable is 0 ks8851 spi1.0: eth0: revision 0, MAC 08:00:28:01:4d:c6, IRQ 194, has EEPROM Fix this by partially reverting the original commit. Signed-off-by: Russell King diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 46ef5fe..0c73dd4 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -801,7 +801,7 @@ static int omap2_mcspi_setup(struct spi_device *spi) mcspi_dma = &mcspi->dma_channels[spi->chip_select]; if (!cs) { - cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL); + cs = kzalloc(sizeof *cs, GFP_KERNEL); if (!cs) return -ENOMEM; cs->base = mcspi->base + spi->chip_select * 0x14; @@ -842,6 +842,7 @@ static void omap2_mcspi_cleanup(struct spi_device *spi) cs = spi->controller_state; list_del(&cs->node); + kfree(cs); } if (spi->chip_select < spi->master->num_chipselect) { -- cgit v0.10.2