From 57c1a24ee276a33190008243f986419e122c0dea Mon Sep 17 00:00:00 2001 From: Alexey Korolev Date: Tue, 6 Jan 2009 17:36:09 +0000 Subject: [MTD] [LPDDR] qinfo_probe depends on lpddr Signed-off-by: Alexey Korolev Signed-off-by: David Woodhouse diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig index acd4ea9..5a401d8 100644 --- a/drivers/mtd/lpddr/Kconfig +++ b/drivers/mtd/lpddr/Kconfig @@ -12,6 +12,7 @@ config MTD_LPDDR DDR memories, intended for battery-operated systems. config MTD_QINFO_PROBE + depends on MTD_LPDDR tristate "Detect flash chips by QINFO probe" help Device Information for LPDDR chips is offered through the Overlay -- cgit v0.10.2 From 5f877607cdfe8b60bf96fb96e527e0ce2a21e68b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 11 Jan 2009 19:52:19 +0000 Subject: [MTD] map_rom has NULL erase pointer Which means if inftl or similar are loaded with it (which is a dumb thing to do admittedly) it may oops. Closes #8108 [dwmw2: change error to -EROFS to match write-protected flash] Signed-off-by: Alan Cox Signed-off-by: David Woodhouse diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index 821d0ed..c76d6e5 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -19,6 +19,7 @@ static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static void maprom_nop (struct mtd_info *); static struct mtd_info *map_rom_probe(struct map_info *map); +static int maprom_erase (struct mtd_info *mtd, struct erase_info *info); static struct mtd_chip_driver maprom_chipdrv = { .probe = map_rom_probe, @@ -42,6 +43,7 @@ static struct mtd_info *map_rom_probe(struct map_info *map) mtd->read = maprom_read; mtd->write = maprom_write; mtd->sync = maprom_nop; + mtd->erase = maprom_erase; mtd->flags = MTD_CAP_ROM; mtd->erasesize = map->size; mtd->writesize = 1; @@ -71,6 +73,12 @@ static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *re return -EIO; } +static int maprom_erase (struct mtd_info *mtd, struct erase_info *info) +{ + /* We do our best 8) */ + return -EROFS; +} + static int __init map_rom_init(void) { register_mtd_chip_driver(&maprom_chipdrv); -- cgit v0.10.2 From 3afd522de8d8ec446efe957b86e4f63e3dd8ce9d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 19 Jan 2009 00:15:13 +0100 Subject: [MTD] slram: Handle negative devlength correctly A negative devlength won't get noticed and clean up: Signed-off-by: Roel Kluin Signed-off-by: David Woodhouse diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index a425d09..00248e8 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -267,22 +267,28 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength) if (*(szlength) != '+') { devlength = simple_strtoul(szlength, &buffer, 0); devlength = handle_unit(devlength, buffer) - devstart; + if (devlength < devstart) + goto err_out; + + devlength -= devstart; } else { devlength = simple_strtoul(szlength + 1, &buffer, 0); devlength = handle_unit(devlength, buffer); } T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n", devname, devstart, devlength); - if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) { - E("slram: Illegal start / length parameter.\n"); - return(-EINVAL); - } + if (devlength % SLRAM_BLK_SZ != 0) + goto err_out; if ((devstart = register_device(devname, devstart, devlength))){ unregister_devices(); return((int)devstart); } return(0); + +err_out: + E("slram: Illegal length parameter.\n"); + return(-EINVAL); } #ifndef MODULE -- cgit v0.10.2 From 43f7392ba9e2585bf34f21399b1ed78692b5d437 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Sat, 3 Jan 2009 23:56:27 +0100 Subject: intel-iommu: fix build error with INTR_REMAP=y and DMAR=n This fix should be safe since iommu->agaw is only used in intel-iommu.c. And this file is only compiled with DMAR=y. Signed-off-by: Joerg Roedel Signed-off-by: David Woodhouse diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index f5a662a..2b4162d 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -491,7 +491,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) int map_size; u32 ver; static int iommu_allocated = 0; - int agaw; + int agaw = 0; iommu = kzalloc(sizeof(*iommu), GFP_KERNEL); if (!iommu) @@ -507,6 +507,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG); iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG); +#ifdef CONFIG_DMAR agaw = iommu_calculate_agaw(iommu); if (agaw < 0) { printk(KERN_ERR @@ -514,6 +515,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) iommu->seq_id); goto error; } +#endif iommu->agaw = agaw; /* the registers might be more than one page */ -- cgit v0.10.2 From 704126ad81b8cb7d3d70adb9ecb143f4d3fb38af Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Sun, 4 Jan 2009 16:28:52 +0800 Subject: VT-d: handle Invalidation Queue Error to avoid system hang When hardware detects any error with a descriptor from the invalidation queue, it stops fetching new descriptors from the queue until software clears the Invalidation Queue Error bit in the Fault Status register. Following fix handles the IQE so the kernel won't be trapped in an infinite loop. Signed-off-by: Yu Zhao Signed-off-by: David Woodhouse diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 2b4162d..8d3e9c2 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -573,19 +573,49 @@ static inline void reclaim_free_desc(struct q_inval *qi) } } +static int qi_check_fault(struct intel_iommu *iommu, int index) +{ + u32 fault; + int head; + struct q_inval *qi = iommu->qi; + int wait_index = (index + 1) % QI_LENGTH; + + fault = readl(iommu->reg + DMAR_FSTS_REG); + + /* + * If IQE happens, the head points to the descriptor associated + * with the error. No new descriptors are fetched until the IQE + * is cleared. + */ + if (fault & DMA_FSTS_IQE) { + head = readl(iommu->reg + DMAR_IQH_REG); + if ((head >> 4) == index) { + memcpy(&qi->desc[index], &qi->desc[wait_index], + sizeof(struct qi_desc)); + __iommu_flush_cache(iommu, &qi->desc[index], + sizeof(struct qi_desc)); + writel(DMA_FSTS_IQE, iommu->reg + DMAR_FSTS_REG); + return -EINVAL; + } + } + + return 0; +} + /* * Submit the queued invalidation descriptor to the remapping * hardware unit and wait for its completion. */ -void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) +int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) { + int rc = 0; struct q_inval *qi = iommu->qi; struct qi_desc *hw, wait_desc; int wait_index, index; unsigned long flags; if (!qi) - return; + return 0; hw = qi->desc; @@ -603,7 +633,8 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) hw[index] = *desc; - wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE; + wait_desc.low = QI_IWD_STATUS_DATA(QI_DONE) | + QI_IWD_STATUS_WRITE | QI_IWD_TYPE; wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]); hw[wait_index] = wait_desc; @@ -614,13 +645,11 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) qi->free_head = (qi->free_head + 2) % QI_LENGTH; qi->free_cnt -= 2; - spin_lock(&iommu->register_lock); /* * update the HW tail register indicating the presence of * new descriptors. */ writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG); - spin_unlock(&iommu->register_lock); while (qi->desc_status[wait_index] != QI_DONE) { /* @@ -630,15 +659,21 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) * a deadlock where the interrupt context can wait indefinitely * for free slots in the queue. */ + rc = qi_check_fault(iommu, index); + if (rc) + goto out; + spin_unlock(&qi->q_lock); cpu_relax(); spin_lock(&qi->q_lock); } - - qi->desc_status[index] = QI_DONE; +out: + qi->desc_status[index] = qi->desc_status[wait_index] = QI_DONE; reclaim_free_desc(qi); spin_unlock_irqrestore(&qi->q_lock, flags); + + return rc; } /* @@ -651,13 +686,13 @@ void qi_global_iec(struct intel_iommu *iommu) desc.low = QI_IEC_TYPE; desc.high = 0; + /* should never fail */ qi_submit_sync(&desc, iommu); } int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm, u64 type, int non_present_entry_flush) { - struct qi_desc desc; if (non_present_entry_flush) { @@ -671,10 +706,7 @@ int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm, | QI_CC_GRAN(type) | QI_CC_TYPE; desc.high = 0; - qi_submit_sync(&desc, iommu); - - return 0; - + return qi_submit_sync(&desc, iommu); } int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, @@ -704,10 +736,7 @@ int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih) | QI_IOTLB_AM(size_order); - qi_submit_sync(&desc, iommu); - - return 0; - + return qi_submit_sync(&desc, iommu); } /* diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index f78371b..45effc5 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -207,7 +207,7 @@ int alloc_irte(struct intel_iommu *iommu, int irq, u16 count) return index; } -static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask) +static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask) { struct qi_desc desc; @@ -215,7 +215,7 @@ static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask) | QI_IEC_SELECTIVE; desc.high = 0; - qi_submit_sync(&desc, iommu); + return qi_submit_sync(&desc, iommu); } int map_irq_to_irte_handle(int irq, u16 *sub_handle) @@ -283,6 +283,7 @@ int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index) int modify_irte(int irq, struct irte *irte_modified) { + int rc; int index; struct irte *irte; struct intel_iommu *iommu; @@ -303,14 +304,15 @@ int modify_irte(int irq, struct irte *irte_modified) set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1)); __iommu_flush_cache(iommu, irte, sizeof(*irte)); - qi_flush_iec(iommu, index, 0); - + rc = qi_flush_iec(iommu, index, 0); spin_unlock(&irq_2_ir_lock); - return 0; + + return rc; } int flush_irte(int irq) { + int rc; int index; struct intel_iommu *iommu; struct irq_2_iommu *irq_iommu; @@ -326,10 +328,10 @@ int flush_irte(int irq) index = irq_iommu->irte_index + irq_iommu->sub_handle; - qi_flush_iec(iommu, index, irq_iommu->irte_mask); + rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask); spin_unlock(&irq_2_ir_lock); - return 0; + return rc; } struct intel_iommu *map_ioapic_to_ir(int apic) @@ -355,6 +357,7 @@ struct intel_iommu *map_dev_to_ir(struct pci_dev *dev) int free_irte(int irq) { + int rc = 0; int index, i; struct irte *irte; struct intel_iommu *iommu; @@ -375,7 +378,7 @@ int free_irte(int irq) if (!irq_iommu->sub_handle) { for (i = 0; i < (1 << irq_iommu->irte_mask); i++) set_64bit((unsigned long *)irte, 0); - qi_flush_iec(iommu, index, irq_iommu->irte_mask); + rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask); } irq_iommu->iommu = NULL; @@ -385,7 +388,7 @@ int free_irte(int irq) spin_unlock(&irq_2_ir_lock); - return 0; + return rc; } static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode) diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index c4f6c10..d2e3cbf 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -194,6 +194,7 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) /* FSTS_REG */ #define DMA_FSTS_PPF ((u32)2) #define DMA_FSTS_PFO ((u32)1) +#define DMA_FSTS_IQE (1 << 4) #define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff) /* FRCD_REG, 32 bits access */ @@ -328,7 +329,7 @@ extern int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, unsigned int size_order, u64 type, int non_present_entry_flush); -extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); +extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t); extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t); -- cgit v0.10.2 From 1b0e235cc9bfae4bc0f5cd0cba929206fb0f6a64 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 11 Feb 2009 00:54:07 -0800 Subject: sparc64: Fix crashes in jbusmc_print_dimm() Return was missing for the case where there is no dimm info match. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/chmc.c b/arch/sparc/kernel/chmc.c index 3b9f4d6..e1a9598 100644 --- a/arch/sparc/kernel/chmc.c +++ b/arch/sparc/kernel/chmc.c @@ -306,6 +306,7 @@ static int jbusmc_print_dimm(int syndrome_code, buf[1] = '?'; buf[2] = '?'; buf[3] = '\0'; + return 0; } p = dp->controller; prop = &p->layout; -- cgit v0.10.2 From 270c5609e2540290d5d9b9f323b7b652cf0c5b75 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 9 Feb 2009 20:59:40 +0000 Subject: sh: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c index 020a96f..4a5e597 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c @@ -18,8 +18,8 @@ #include #include -const static int pll1rate[]={1,2,3,4,6,8}; -const static int pfc_divisors[]={1,2,3,4,6,8,12}; +static const int pll1rate[]={1,2,3,4,6,8}; +static const int pfc_divisors[]={1,2,3,4,6,8,12}; #define ifc_divisors pfc_divisors #if (CONFIG_SH_CLK_MD == 0) -- cgit v0.10.2 From 34aeb43e2d3800f4d8f96feb9f1b49cd506679d5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 10 Feb 2009 09:04:00 +0000 Subject: serial: sh-sci: fix overrun error handling for SH7785 SCIF. There was a typo for the overrun bit definition, causing it not to be handled correctly on SH7785, fix it up. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 3599828..022e89f 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -133,7 +133,7 @@ # define SCSPTR3 0xffed0024 /* 16 bit SCIF */ # define SCSPTR4 0xffee0024 /* 16 bit SCIF */ # define SCSPTR5 0xffef0024 /* 16 bit SCIF */ -# define SCIF_OPER 0x0001 /* Overrun error bit */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ defined(CONFIG_CPU_SUBTYPE_SH7203) || \ -- cgit v0.10.2 From e480814f138cd5d78a8efe397756ba6b6518fdb6 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 11 Feb 2009 13:12:17 -0800 Subject: [MTD] [MAPS] physmap: fix wrong free and del_mtd_{partition,device} commit 176bf2e0f10ecf1d20a97db3bd5bb2e6ba0b5668 ("physmap: fix leak of memory returned by parse_mtd_partitions") deals with a memory leak and frees the pointer array of mtd_partition after the call to add_mtd_partitions(). the problem is that mtd_table[x]->name still points to the freed memory. Aldo physmap_flash_remove() should call del_mtd_partitions() or del_mtd_device() only once. Signed-off-by: Atsushi Nemoto Reported-by: Matthias Kaehlcke Tested-by: Matthias Kaehlcke Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 8774366..4b122e7 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -29,6 +29,7 @@ struct physmap_flash_info { struct map_info map[MAX_RESOURCES]; #ifdef CONFIG_MTD_PARTITIONS int nr_parts; + struct mtd_partition *parts; #endif }; @@ -45,25 +46,26 @@ static int physmap_flash_remove(struct platform_device *dev) physmap_data = dev->dev.platform_data; -#ifdef CONFIG_MTD_CONCAT - if (info->cmtd != info->mtd[0]) { +#ifdef CONFIG_MTD_PARTITIONS + if (info->nr_parts) { + del_mtd_partitions(info->cmtd); + kfree(info->parts); + } else if (physmap_data->nr_parts) + del_mtd_partitions(info->cmtd); + else del_mtd_device(info->cmtd); +#else + del_mtd_device(info->cmtd); +#endif + +#ifdef CONFIG_MTD_CONCAT + if (info->cmtd != info->mtd[0]) mtd_concat_destroy(info->cmtd); - } #endif for (i = 0; i < MAX_RESOURCES; i++) { - if (info->mtd[i] != NULL) { -#ifdef CONFIG_MTD_PARTITIONS - if (info->nr_parts || physmap_data->nr_parts) - del_mtd_partitions(info->mtd[i]); - else - del_mtd_device(info->mtd[i]); -#else - del_mtd_device(info->mtd[i]); -#endif + if (info->mtd[i] != NULL) map_destroy(info->mtd[i]); - } } return 0; } @@ -86,9 +88,6 @@ static int physmap_flash_probe(struct platform_device *dev) int err = 0; int i; int devices_found = 0; -#ifdef CONFIG_MTD_PARTITIONS - struct mtd_partition *parts; -#endif physmap_data = dev->dev.platform_data; if (physmap_data == NULL) @@ -167,10 +166,11 @@ static int physmap_flash_probe(struct platform_device *dev) goto err_out; #ifdef CONFIG_MTD_PARTITIONS - err = parse_mtd_partitions(info->cmtd, part_probe_types, &parts, 0); + err = parse_mtd_partitions(info->cmtd, part_probe_types, + &info->parts, 0); if (err > 0) { - add_mtd_partitions(info->cmtd, parts, err); - kfree(parts); + add_mtd_partitions(info->cmtd, info->parts, err); + info->nr_parts = err; return 0; } -- cgit v0.10.2 From 10715b8751dfc403aeb7fbc35166417fa1664eda Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 11 Feb 2009 13:12:18 -0800 Subject: [MTD] [MAPS] blackfin: fix memory leak in error path Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 6fec86a..576611f 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -152,14 +152,18 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev) if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) { pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin); + kfree(state); return -EBUSY; } gpio_direction_output(state->enet_flash_pin, 1); pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8); state->mtd = do_map_probe(memory->name, &state->map); - if (!state->mtd) + if (!state->mtd) { + gpio_free(state->enet_flash_pin); + kfree(state); return -ENXIO; + } #ifdef CONFIG_MTD_PARTITIONS ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0); -- cgit v0.10.2 From ab00d68276295a1b4da7ad924a35a3566e9c2698 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 11 Feb 2009 13:12:19 -0800 Subject: [MTD] [MAPS] blackfin async requires complex mappings Correct a build error. bfin-async uses complex mappings and so needs it. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 0225cbb..043d50f 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -491,7 +491,7 @@ config MTD_PCMCIA_ANONYMOUS config MTD_BFIN_ASYNC tristate "Blackfin BF533-STAMP Flash Chip Support" - depends on BFIN533_STAMP && MTD_CFI + depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS select MTD_PARTITIONS default y help -- cgit v0.10.2 From 084eb960e81505680a9963665722d1bfd94af6a7 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Wed, 11 Feb 2009 13:24:19 -0800 Subject: intel-iommu: fix endless "Unknown DMAR structure type" loop I have a SuperMicro C2SBX motherboard with BIOS revision 1.0b. With vt-d enabled in the BIOS, Linux gets into an endless loop printing "DMAR:Unknown DMAR structure type" when booting. Here is the DMAR ACPI table: DMAR @ 0x7fe86dec 0000: 44 4d 41 52 98 00 00 00 01 6f 49 6e 74 65 6c 20 DMAR.....oIntel 0010: 4f 45 4d 44 4d 41 52 20 00 00 04 06 4c 4f 48 52 OEMDMAR ....LOHR 0020: 01 00 00 00 23 00 00 00 00 00 00 00 00 00 00 00 ....#........... 0030: 01 00 58 00 00 00 00 00 00 a0 e8 7f 00 00 00 00 ..X............. 0040: ff ff ef 7f 00 00 00 00 01 08 00 00 00 00 1d 00 ................ 0050: 01 08 00 00 00 00 1d 01 01 08 00 00 00 00 1d 02 ................ 0060: 01 08 00 00 00 00 1d 07 01 08 00 00 00 00 1a 00 ................ 0070: 01 08 00 00 00 00 1a 01 01 08 00 00 00 00 1a 02 ................ 0080: 01 08 00 00 00 00 1a 07 01 08 00 00 00 00 1a 07 ................ 0090: c0 00 68 00 04 10 66 60 ..h...f` Here are the messages printed by the kernel: DMAR:Host address width 36 DMAR:RMRR base: 0x000000007fe8a000 end: 0x000000007fefffff DMAR:Unknown DMAR structure type DMAR:Unknown DMAR structure type DMAR:Unknown DMAR structure type ... Although I not very familiar with ACPI, to me it looks like struct acpi_dmar_header::length == 0x0058 is incorrect, causing parse_dmar_table() to look at an invalid offset on the next loop. This offset happens to have struct acpi_dmar_header::length == 0x0000, which prevents the loop from ever terminating. This patch checks for this condition and bails out instead of looping forever. Signed-off-by: Tony Battersby Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 8d3e9c2..26c536b 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -330,6 +330,14 @@ parse_dmar_table(void) entry_header = (struct acpi_dmar_header *)(dmar + 1); while (((unsigned long)entry_header) < (((unsigned long)dmar) + dmar_tbl->length)) { + /* Avoid looping forever on bad ACPI tables */ + if (entry_header->length == 0) { + printk(KERN_WARNING PREFIX + "Invalid 0-length structure\n"); + ret = -EINVAL; + break; + } + dmar_table_print_dmar_entry(entry_header); switch (entry_header->type) { -- cgit v0.10.2 From efab0b5d3eed6aa71f8e3233e4e11774eedc04dc Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Wed, 11 Feb 2009 13:27:02 -0800 Subject: [JFFS2] force the jffs2 GC daemon to behave a bit better I've noticed some pretty poor behavior on OLPC machines after bootup, when gdm/X are starting. The GCD monopolizes the scheduler (which in turns means it gets to do more nand i/o), which results in processes taking much much longer than they should to start. As an example, on an OLPC machine going from OFW to a usable X (via auto-login gdm) takes 2m 30s. The majority of this time is consumed by the switch into graphical mode. With this patch, we cut a full 60s off of bootup time. After bootup, things are much snappier as well. Note that we have seen a CRC node error with this patch that causes the machine to fail to boot, but we've also seen that problem without this patch. Signed-off-by: Andres Salomon Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c index 3cceef4..e958010 100644 --- a/fs/jffs2/background.c +++ b/fs/jffs2/background.c @@ -95,13 +95,17 @@ static int jffs2_garbage_collect_thread(void *_c) spin_unlock(&c->erase_completion_lock); - /* This thread is purely an optimisation. But if it runs when - other things could be running, it actually makes things a - lot worse. Use yield() and put it at the back of the runqueue - every time. Especially during boot, pulling an inode in - with read_inode() is much preferable to having the GC thread - get there first. */ - yield(); + /* Problem - immediately after bootup, the GCD spends a lot + * of time in places like jffs2_kill_fragtree(); so much so + * that userspace processes (like gdm and X) are starved + * despite plenty of cond_resched()s and renicing. Yield() + * doesn't help, either (presumably because userspace and GCD + * are generally competing for a higher latency resource - + * disk). + * This forces the GCD to slow the hell down. Pulling an + * inode in with read_inode() is much preferable to having + * the GC thread get there first. */ + schedule_timeout_interruptible(msecs_to_jiffies(50)); /* Put_super will send a SIGKILL and then wait on the sem. */ -- cgit v0.10.2 From e0ae4f5503235ba4449ffb5bcb4189edcef4d584 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 17 Feb 2009 20:40:09 -0800 Subject: PCI quirk: enable MSI on 8132 David reported that LSI SAS doesn't work with MSI. It turns out that his BIOS doesn't enable it, but the HT MSI 8132 does support HT MSI. Add quirk to enable it Cc: stable@kernel.org Reported-by: David Lang Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index baad093..a21e1c2 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1981,7 +1981,6 @@ static void __devinit quirk_msi_ht_cap(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, quirk_msi_ht_cap); - /* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings. */ @@ -2032,6 +2031,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, + ht_enable_msi_mapping); + /* The P5N32-SLI Premium motherboard from Asus has a problem with msi * for the MCP55 NIC. It is not yet determined whether the msi problem * also affects other devices. As for now, turn off msi for this device. -- cgit v0.10.2 From e32740d9786b8a6c54f6e3d670567d9ef57b3b8c Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 19 Feb 2009 11:58:37 -0800 Subject: ALSA: pcxhr.h replace signed one-bit bitfields The usage and comments make it clear values of 1/0 were intended rather than -1/0 Noticed by sparse: sound/pci/pcxhr/pcxhr.h:100:20: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:101:22: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:102:24: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:103:21: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:104:25: error: dubious one-bit signed bitfield sound/pci/pcxhr/pcxhr.h:105:20: error: dubious one-bit signed bitfield Signed-off-by: Harvey Harrison Signed-off-by: Takashi Iwai diff --git a/sound/pci/pcxhr/pcxhr.h b/sound/pci/pcxhr/pcxhr.h index 84131a9..69d87de 100644 --- a/sound/pci/pcxhr/pcxhr.h +++ b/sound/pci/pcxhr/pcxhr.h @@ -97,12 +97,12 @@ struct pcxhr_mgr { int capture_chips; int fw_file_set; int firmware_num; - int is_hr_stereo:1; - int board_has_aes1:1; /* if 1 board has AES1 plug and SRC */ - int board_has_analog:1; /* if 0 the board is digital only */ - int board_has_mic:1; /* if 1 the board has microphone input */ - int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */ - int mono_capture:1; /* if 1 the board does mono capture */ + unsigned int is_hr_stereo:1; + unsigned int board_has_aes1:1; /* if 1 board has AES1 plug and SRC */ + unsigned int board_has_analog:1; /* if 0 the board is digital only */ + unsigned int board_has_mic:1; /* if 1 the board has microphone input */ + unsigned int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */ + unsigned int mono_capture:1; /* if 1 the board does mono capture */ struct snd_dma_buffer hostport; -- cgit v0.10.2 From 55290e1932102f57ea17e7cff895914c2dbdb4c4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 20 Feb 2009 15:59:01 +0100 Subject: ALSA: hda - Fix parse of init_verbs sysfs entry Fixed the parse of init_verbs hwdep sysfs entry. Simplieied using sscanf. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c index 482fb03..4ae51dc 100644 --- a/sound/pci/hda/hda_hwdep.c +++ b/sound/pci/hda/hda_hwdep.c @@ -277,18 +277,19 @@ static ssize_t init_verbs_store(struct device *dev, { struct snd_hwdep *hwdep = dev_get_drvdata(dev); struct hda_codec *codec = hwdep->private_data; - char *p; - struct hda_verb verb, *v; + struct hda_verb *v; + int nid, verb, param; - verb.nid = simple_strtoul(buf, &p, 0); - verb.verb = simple_strtoul(p, &p, 0); - verb.param = simple_strtoul(p, &p, 0); - if (!verb.nid || !verb.verb || !verb.param) + if (sscanf(buf, "%i %i %i", &nid, &verb, ¶m) != 3) + return -EINVAL; + if (!nid || !verb) return -EINVAL; v = snd_array_new(&codec->init_verbs); if (!v) return -ENOMEM; - *v = verb; + v->nid = nid; + v->verb = verb; + v->param = param; return count; } -- cgit v0.10.2 From 6a63209fc02d5483371f07e4913ee8abad608051 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 20 Feb 2009 11:00:09 -0500 Subject: Btrfs: add better -ENOSPC handling This is a step in the direction of better -ENOSPC handling. Instead of checking the global bytes counter we check the space_info bytes counters to make sure we have enough space. If we don't we go ahead and try to allocate a new chunk, and then if that fails we return -ENOSPC. This patch adds two counters to btrfs_space_info, bytes_delalloc and bytes_may_use. bytes_delalloc account for extents we've actually setup for delalloc and will be allocated at some point down the line. bytes_may_use is to keep track of how many bytes we may use for delalloc at some point. When we actually set the extent_bit for the delalloc bytes we subtract the reserved bytes from the bytes_may_use counter. This keeps us from not actually being able to allocate space for any delalloc bytes. Signed-off-by: Josef Bacik diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index a8c9693..72677ce 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -66,6 +66,9 @@ struct btrfs_inode { */ struct list_head delalloc_inodes; + /* the space_info for where this inode's data allocations are done */ + struct btrfs_space_info *space_info; + /* full 64 bit generation number, struct vfs_inode doesn't have a big * enough field for this. */ @@ -94,6 +97,11 @@ struct btrfs_inode { */ u64 delalloc_bytes; + /* total number of bytes that may be used for this inode for + * delalloc + */ + u64 reserved_bytes; + /* * the size of the file stored in the metadata on disk. data=ordered * means the in-memory i_size might be larger than the size on disk diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 766b31a..82491ba 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -596,13 +596,27 @@ struct btrfs_block_group_item { struct btrfs_space_info { u64 flags; - u64 total_bytes; - u64 bytes_used; - u64 bytes_pinned; - u64 bytes_reserved; - u64 bytes_readonly; - int full; - int force_alloc; + + u64 total_bytes; /* total bytes in the space */ + u64 bytes_used; /* total bytes used on disk */ + u64 bytes_pinned; /* total bytes pinned, will be freed when the + transaction finishes */ + u64 bytes_reserved; /* total bytes the allocator has reserved for + current allocations */ + u64 bytes_readonly; /* total bytes that are read only */ + + /* delalloc accounting */ + u64 bytes_delalloc; /* number of bytes reserved for allocation, + this space is not necessarily reserved yet + by the allocator */ + u64 bytes_may_use; /* number of bytes that may be used for + delalloc */ + + int full; /* indicates that we cannot allocate any more + chunks for this space */ + int force_alloc; /* set if we need to force a chunk alloc for + this space */ + struct list_head list; /* for block groups in our same type */ @@ -1782,6 +1796,16 @@ int btrfs_add_dead_reloc_root(struct btrfs_root *root); int btrfs_cleanup_reloc_trees(struct btrfs_root *root); int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len); u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags); +void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde); +int btrfs_check_metadata_free_space(struct btrfs_root *root); +int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode, + u64 bytes); +void btrfs_free_reserved_data_space(struct btrfs_root *root, + struct inode *inode, u64 bytes); +void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode, + u64 bytes); +void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode, + u64 bytes); /* ctree.c */ int btrfs_previous_item(struct btrfs_root *root, struct btrfs_path *path, u64 min_objectid, @@ -2027,8 +2051,6 @@ int btrfs_merge_bio_hook(struct page *page, unsigned long offset, unsigned long btrfs_force_ra(struct address_space *mapping, struct file_ra_state *ra, struct file *file, pgoff_t offset, pgoff_t last_index); -int btrfs_check_free_space(struct btrfs_root *root, u64 num_required, - int for_del); int btrfs_page_mkwrite(struct vm_area_struct *vma, struct page *page); int btrfs_readpage(struct file *file, struct page *page); void btrfs_delete_inode(struct inode *inode); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 0a5d796..e11875e 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -60,6 +60,10 @@ static int update_block_group(struct btrfs_trans_handle *trans, u64 bytenr, u64 num_bytes, int alloc, int mark_free); +static int do_chunk_alloc(struct btrfs_trans_handle *trans, + struct btrfs_root *extent_root, u64 alloc_bytes, + u64 flags, int force); + static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits) { return (cache->flags & bits) == bits; @@ -1909,6 +1913,7 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags, found->bytes_pinned = 0; found->bytes_reserved = 0; found->bytes_readonly = 0; + found->bytes_delalloc = 0; found->full = 0; found->force_alloc = 0; *space_info = found; @@ -1972,6 +1977,196 @@ u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags) return flags; } +static u64 btrfs_get_alloc_profile(struct btrfs_root *root, u64 data) +{ + struct btrfs_fs_info *info = root->fs_info; + u64 alloc_profile; + + if (data) { + alloc_profile = info->avail_data_alloc_bits & + info->data_alloc_profile; + data = BTRFS_BLOCK_GROUP_DATA | alloc_profile; + } else if (root == root->fs_info->chunk_root) { + alloc_profile = info->avail_system_alloc_bits & + info->system_alloc_profile; + data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile; + } else { + alloc_profile = info->avail_metadata_alloc_bits & + info->metadata_alloc_profile; + data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile; + } + + return btrfs_reduce_alloc_profile(root, data); +} + +void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *inode) +{ + u64 alloc_target; + + alloc_target = btrfs_get_alloc_profile(root, 1); + BTRFS_I(inode)->space_info = __find_space_info(root->fs_info, + alloc_target); +} + +/* + * for now this just makes sure we have at least 5% of our metadata space free + * for use. + */ +int btrfs_check_metadata_free_space(struct btrfs_root *root) +{ + struct btrfs_fs_info *info = root->fs_info; + struct btrfs_space_info *meta_sinfo; + u64 alloc_target, thresh; + + /* get the space info for where the metadata will live */ + alloc_target = btrfs_get_alloc_profile(root, 0); + meta_sinfo = __find_space_info(info, alloc_target); + + /* + * if the metadata area isn't maxed out then there is no sense in + * checking how much is used, since we can always allocate a new chunk + */ + if (!meta_sinfo->full) + return 0; + + spin_lock(&meta_sinfo->lock); + thresh = meta_sinfo->total_bytes * 95; + + do_div(thresh, 100); + + if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved + + meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly > thresh) { + spin_unlock(&meta_sinfo->lock); + return -ENOSPC; + } + spin_unlock(&meta_sinfo->lock); + + return 0; +} + +/* + * This will check the space that the inode allocates from to make sure we have + * enough space for bytes. + */ +int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode, + u64 bytes) +{ + struct btrfs_space_info *data_sinfo; + int ret = 0; + + /* make sure bytes are sectorsize aligned */ + bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1); + + data_sinfo = BTRFS_I(inode)->space_info; +again: + /* make sure we have enough space to handle the data first */ + spin_lock(&data_sinfo->lock); + if (data_sinfo->total_bytes - data_sinfo->bytes_used - + data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved - + data_sinfo->bytes_pinned - data_sinfo->bytes_readonly - + data_sinfo->bytes_may_use < bytes) { + /* + * if we don't have enough free bytes in this space then we need + * to alloc a new chunk. + */ + if (!data_sinfo->full) { + u64 alloc_target; + struct btrfs_trans_handle *trans; + + data_sinfo->force_alloc = 1; + spin_unlock(&data_sinfo->lock); + + alloc_target = btrfs_get_alloc_profile(root, 1); + trans = btrfs_start_transaction(root, 1); + if (!trans) + return -ENOMEM; + + ret = do_chunk_alloc(trans, root->fs_info->extent_root, + bytes + 2 * 1024 * 1024, + alloc_target, 0); + btrfs_end_transaction(trans, root); + if (ret) + return ret; + goto again; + } + spin_unlock(&data_sinfo->lock); + printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes" + ", %llu bytes_used, %llu bytes_reserved, " + "%llu bytes_pinned, %llu bytes_readonly, %llu may use" + "%llu total\n", bytes, data_sinfo->bytes_delalloc, + data_sinfo->bytes_used, data_sinfo->bytes_reserved, + data_sinfo->bytes_pinned, data_sinfo->bytes_readonly, + data_sinfo->bytes_may_use, data_sinfo->total_bytes); + return -ENOSPC; + } + data_sinfo->bytes_may_use += bytes; + BTRFS_I(inode)->reserved_bytes += bytes; + spin_unlock(&data_sinfo->lock); + + return btrfs_check_metadata_free_space(root); +} + +/* + * if there was an error for whatever reason after calling + * btrfs_check_data_free_space, call this so we can cleanup the counters. + */ +void btrfs_free_reserved_data_space(struct btrfs_root *root, + struct inode *inode, u64 bytes) +{ + struct btrfs_space_info *data_sinfo; + + /* make sure bytes are sectorsize aligned */ + bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1); + + data_sinfo = BTRFS_I(inode)->space_info; + spin_lock(&data_sinfo->lock); + data_sinfo->bytes_may_use -= bytes; + BTRFS_I(inode)->reserved_bytes -= bytes; + spin_unlock(&data_sinfo->lock); +} + +/* called when we are adding a delalloc extent to the inode's io_tree */ +void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode, + u64 bytes) +{ + struct btrfs_space_info *data_sinfo; + + /* get the space info for where this inode will be storing its data */ + data_sinfo = BTRFS_I(inode)->space_info; + + /* make sure we have enough space to handle the data first */ + spin_lock(&data_sinfo->lock); + data_sinfo->bytes_delalloc += bytes; + + /* + * we are adding a delalloc extent without calling + * btrfs_check_data_free_space first. This happens on a weird + * writepage condition, but shouldn't hurt our accounting + */ + if (unlikely(bytes > BTRFS_I(inode)->reserved_bytes)) { + data_sinfo->bytes_may_use -= BTRFS_I(inode)->reserved_bytes; + BTRFS_I(inode)->reserved_bytes = 0; + } else { + data_sinfo->bytes_may_use -= bytes; + BTRFS_I(inode)->reserved_bytes -= bytes; + } + + spin_unlock(&data_sinfo->lock); +} + +/* called when we are clearing an delalloc extent from the inode's io_tree */ +void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode, + u64 bytes) +{ + struct btrfs_space_info *info; + + info = BTRFS_I(inode)->space_info; + + spin_lock(&info->lock); + info->bytes_delalloc -= bytes; + spin_unlock(&info->lock); +} + static int do_chunk_alloc(struct btrfs_trans_handle *trans, struct btrfs_root *extent_root, u64 alloc_bytes, u64 flags, int force) @@ -3105,6 +3300,10 @@ static void dump_space_info(struct btrfs_space_info *info, u64 bytes) (unsigned long long)(info->total_bytes - info->bytes_used - info->bytes_pinned - info->bytes_reserved), (info->full) ? "" : "not "); + printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu," + " may_use=%llu, used=%llu\n", info->total_bytes, + info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use, + info->bytes_used); down_read(&info->groups_sem); list_for_each_entry(cache, &info->block_groups, list) { @@ -3131,24 +3330,10 @@ static int __btrfs_reserve_extent(struct btrfs_trans_handle *trans, { int ret; u64 search_start = 0; - u64 alloc_profile; struct btrfs_fs_info *info = root->fs_info; - if (data) { - alloc_profile = info->avail_data_alloc_bits & - info->data_alloc_profile; - data = BTRFS_BLOCK_GROUP_DATA | alloc_profile; - } else if (root == root->fs_info->chunk_root) { - alloc_profile = info->avail_system_alloc_bits & - info->system_alloc_profile; - data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile; - } else { - alloc_profile = info->avail_metadata_alloc_bits & - info->metadata_alloc_profile; - data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile; - } + data = btrfs_get_alloc_profile(root, data); again: - data = btrfs_reduce_alloc_profile(root, data); /* * the only place that sets empty_size is btrfs_realloc_node, which * is not called recursively on allocations diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 872f104..dc78954 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1091,19 +1091,24 @@ static ssize_t btrfs_file_write(struct file *file, const char __user *buf, WARN_ON(num_pages > nrptrs); memset(pages, 0, sizeof(struct page *) * nrptrs); - ret = btrfs_check_free_space(root, write_bytes, 0); + ret = btrfs_check_data_free_space(root, inode, write_bytes); if (ret) goto out; ret = prepare_pages(root, file, pages, num_pages, pos, first_index, last_index, write_bytes); - if (ret) + if (ret) { + btrfs_free_reserved_data_space(root, inode, + write_bytes); goto out; + } ret = btrfs_copy_from_user(pos, num_pages, write_bytes, pages, buf); if (ret) { + btrfs_free_reserved_data_space(root, inode, + write_bytes); btrfs_drop_pages(pages, num_pages); goto out; } @@ -1111,8 +1116,11 @@ static ssize_t btrfs_file_write(struct file *file, const char __user *buf, ret = dirty_and_release_pages(NULL, root, file, pages, num_pages, pos, write_bytes); btrfs_drop_pages(pages, num_pages); - if (ret) + if (ret) { + btrfs_free_reserved_data_space(root, inode, + write_bytes); goto out; + } if (will_write) { btrfs_fdatawrite_range(inode->i_mapping, pos, @@ -1136,6 +1144,8 @@ static ssize_t btrfs_file_write(struct file *file, const char __user *buf, } out: mutex_unlock(&inode->i_mutex); + if (ret) + err = ret; out_nolock: kfree(pages); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 3cee77a..7d4f948 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -102,34 +102,6 @@ static int btrfs_init_inode_security(struct inode *inode, struct inode *dir) } /* - * a very lame attempt at stopping writes when the FS is 85% full. There - * are countless ways this is incorrect, but it is better than nothing. - */ -int btrfs_check_free_space(struct btrfs_root *root, u64 num_required, - int for_del) -{ - u64 total; - u64 used; - u64 thresh; - int ret = 0; - - spin_lock(&root->fs_info->delalloc_lock); - total = btrfs_super_total_bytes(&root->fs_info->super_copy); - used = btrfs_super_bytes_used(&root->fs_info->super_copy); - if (for_del) - thresh = total * 90; - else - thresh = total * 85; - - do_div(thresh, 100); - - if (used + root->fs_info->delalloc_bytes + num_required > thresh) - ret = -ENOSPC; - spin_unlock(&root->fs_info->delalloc_lock); - return ret; -} - -/* * this does all the hard work for inserting an inline extent into * the btree. The caller should have done a btrfs_drop_extents so that * no overlapping inline items exist in the btree @@ -1190,6 +1162,7 @@ static int btrfs_set_bit_hook(struct inode *inode, u64 start, u64 end, */ if (!(old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) { struct btrfs_root *root = BTRFS_I(inode)->root; + btrfs_delalloc_reserve_space(root, inode, end - start + 1); spin_lock(&root->fs_info->delalloc_lock); BTRFS_I(inode)->delalloc_bytes += end - start + 1; root->fs_info->delalloc_bytes += end - start + 1; @@ -1223,9 +1196,12 @@ static int btrfs_clear_bit_hook(struct inode *inode, u64 start, u64 end, (unsigned long long)end - start + 1, (unsigned long long) root->fs_info->delalloc_bytes); + btrfs_delalloc_free_space(root, inode, (u64)-1); root->fs_info->delalloc_bytes = 0; BTRFS_I(inode)->delalloc_bytes = 0; } else { + btrfs_delalloc_free_space(root, inode, + end - start + 1); root->fs_info->delalloc_bytes -= end - start + 1; BTRFS_I(inode)->delalloc_bytes -= end - start + 1; } @@ -2245,10 +2221,6 @@ static int btrfs_unlink(struct inode *dir, struct dentry *dentry) root = BTRFS_I(dir)->root; - ret = btrfs_check_free_space(root, 1, 1); - if (ret) - goto fail; - trans = btrfs_start_transaction(root, 1); btrfs_set_trans_block_group(trans, dir); @@ -2261,7 +2233,6 @@ static int btrfs_unlink(struct inode *dir, struct dentry *dentry) nr = trans->blocks_used; btrfs_end_transaction_throttle(trans, root); -fail: btrfs_btree_balance_dirty(root, nr); return ret; } @@ -2284,10 +2255,6 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) return -ENOTEMPTY; } - ret = btrfs_check_free_space(root, 1, 1); - if (ret) - goto fail; - trans = btrfs_start_transaction(root, 1); btrfs_set_trans_block_group(trans, dir); @@ -2304,7 +2271,6 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) fail_trans: nr = trans->blocks_used; ret = btrfs_end_transaction_throttle(trans, root); -fail: btrfs_btree_balance_dirty(root, nr); if (ret && !err) @@ -2818,7 +2784,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t size) if (size <= hole_start) return 0; - err = btrfs_check_free_space(root, 1, 0); + err = btrfs_check_metadata_free_space(root); if (err) return err; @@ -3014,6 +2980,7 @@ static noinline void init_btrfs_i(struct inode *inode) bi->last_trans = 0; bi->logged_trans = 0; bi->delalloc_bytes = 0; + bi->reserved_bytes = 0; bi->disk_i_size = 0; bi->flags = 0; bi->index_cnt = (u64)-1; @@ -3035,6 +3002,7 @@ static int btrfs_init_locked_inode(struct inode *inode, void *p) inode->i_ino = args->ino; init_btrfs_i(inode); BTRFS_I(inode)->root = args->root; + btrfs_set_inode_space_info(args->root, inode); return 0; } @@ -3455,6 +3423,7 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans, BTRFS_I(inode)->index_cnt = 2; BTRFS_I(inode)->root = root; BTRFS_I(inode)->generation = trans->transid; + btrfs_set_inode_space_info(root, inode); if (mode & S_IFDIR) owner = 0; @@ -3602,7 +3571,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, if (!new_valid_dev(rdev)) return -EINVAL; - err = btrfs_check_free_space(root, 1, 0); + err = btrfs_check_metadata_free_space(root); if (err) goto fail; @@ -3665,7 +3634,7 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, u64 objectid; u64 index = 0; - err = btrfs_check_free_space(root, 1, 0); + err = btrfs_check_metadata_free_space(root); if (err) goto fail; trans = btrfs_start_transaction(root, 1); @@ -3733,7 +3702,7 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir, return -ENOENT; btrfs_inc_nlink(inode); - err = btrfs_check_free_space(root, 1, 0); + err = btrfs_check_metadata_free_space(root); if (err) goto fail; err = btrfs_set_inode_index(dir, &index); @@ -3779,7 +3748,7 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) u64 index = 0; unsigned long nr = 1; - err = btrfs_check_free_space(root, 1, 0); + err = btrfs_check_metadata_free_space(root); if (err) goto out_unlock; @@ -4336,7 +4305,7 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct page *page) u64 page_start; u64 page_end; - ret = btrfs_check_free_space(root, PAGE_CACHE_SIZE, 0); + ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE); if (ret) goto out; @@ -4349,6 +4318,7 @@ again: if ((page->mapping != inode->i_mapping) || (page_start >= size)) { + btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE); /* page got truncated out from underneath us */ goto out_unlock; } @@ -4631,7 +4601,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) return -EXDEV; - ret = btrfs_check_free_space(root, 1, 0); + ret = btrfs_check_metadata_free_space(root); if (ret) goto out_unlock; @@ -4749,7 +4719,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root)) return -ENAMETOOLONG; - err = btrfs_check_free_space(root, 1, 0); + err = btrfs_check_metadata_free_space(root); if (err) goto out_fail; diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 988fdc8..bca729f 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -70,7 +70,7 @@ static noinline int create_subvol(struct btrfs_root *root, u64 index = 0; unsigned long nr = 1; - ret = btrfs_check_free_space(root, 1, 0); + ret = btrfs_check_metadata_free_space(root); if (ret) goto fail_commit; @@ -203,7 +203,7 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry, if (!root->ref_cows) return -EINVAL; - ret = btrfs_check_free_space(root, 1, 0); + ret = btrfs_check_metadata_free_space(root); if (ret) goto fail_unlock; @@ -374,7 +374,7 @@ static int btrfs_defrag_file(struct file *file) unsigned long i; int ret; - ret = btrfs_check_free_space(root, inode->i_size, 0); + ret = btrfs_check_data_free_space(root, inode, inode->i_size); if (ret) return -ENOSPC; -- cgit v0.10.2 From 4e06bdd6cbd5105376e7caf4e683ed131e777389 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 20 Feb 2009 10:59:53 -0500 Subject: Btrfs: try committing transaction before returning ENOSPC This fixes a problem where we could return -ENOSPC when we may actually have plenty of space, the space is just pinned. Instead of returning -ENOSPC immediately, commit the transaction first and then try and do the allocation again. This patch also does chunk allocation for metadata if we pass the 80% threshold for metadata space. This will help with stack usage since the chunk allocation will happen early on, instead of when the allocation is happening. Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index e11875e..6b5966a 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2017,26 +2017,49 @@ int btrfs_check_metadata_free_space(struct btrfs_root *root) struct btrfs_fs_info *info = root->fs_info; struct btrfs_space_info *meta_sinfo; u64 alloc_target, thresh; + int committed = 0, ret; /* get the space info for where the metadata will live */ alloc_target = btrfs_get_alloc_profile(root, 0); meta_sinfo = __find_space_info(info, alloc_target); - /* - * if the metadata area isn't maxed out then there is no sense in - * checking how much is used, since we can always allocate a new chunk - */ - if (!meta_sinfo->full) - return 0; - +again: spin_lock(&meta_sinfo->lock); - thresh = meta_sinfo->total_bytes * 95; + if (!meta_sinfo->full) + thresh = meta_sinfo->total_bytes * 80; + else + thresh = meta_sinfo->total_bytes * 95; do_div(thresh, 100); if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved + meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly > thresh) { + struct btrfs_trans_handle *trans; + if (!meta_sinfo->full) { + meta_sinfo->force_alloc = 1; + spin_unlock(&meta_sinfo->lock); + + trans = btrfs_start_transaction(root, 1); + if (!trans) + return -ENOMEM; + + ret = do_chunk_alloc(trans, root->fs_info->extent_root, + 2 * 1024 * 1024, alloc_target, 0); + btrfs_end_transaction(trans, root); + goto again; + } spin_unlock(&meta_sinfo->lock); + + if (!committed) { + committed = 1; + trans = btrfs_join_transaction(root, 1); + if (!trans) + return -ENOMEM; + ret = btrfs_commit_transaction(trans, root); + if (ret) + return ret; + goto again; + } return -ENOSPC; } spin_unlock(&meta_sinfo->lock); @@ -2052,7 +2075,7 @@ int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode, u64 bytes) { struct btrfs_space_info *data_sinfo; - int ret = 0; + int ret = 0, committed = 0; /* make sure bytes are sectorsize aligned */ bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1); @@ -2065,13 +2088,14 @@ again: data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved - data_sinfo->bytes_pinned - data_sinfo->bytes_readonly - data_sinfo->bytes_may_use < bytes) { + struct btrfs_trans_handle *trans; + /* * if we don't have enough free bytes in this space then we need * to alloc a new chunk. */ if (!data_sinfo->full) { u64 alloc_target; - struct btrfs_trans_handle *trans; data_sinfo->force_alloc = 1; spin_unlock(&data_sinfo->lock); @@ -2090,6 +2114,19 @@ again: goto again; } spin_unlock(&data_sinfo->lock); + + /* commit the current transaction and try again */ + if (!committed) { + committed = 1; + trans = btrfs_join_transaction(root, 1); + if (!trans) + return -ENOMEM; + ret = btrfs_commit_transaction(trans, root); + if (ret) + return ret; + goto again; + } + printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes" ", %llu bytes_used, %llu bytes_reserved, " "%llu bytes_pinned, %llu bytes_readonly, %llu may use" -- cgit v0.10.2 From 4c41bd0ec953954158f92bed5d3062645062b98e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 16 Feb 2009 21:29:31 +0100 Subject: [JFFS2] fix mount crash caused by removed nodes At scan time we observed following scenario: node A inserted node B inserted node C inserted -> sets overlapped flag on node B node A is removed due to CRC failure -> overlapped flag on node B remains while (tn->overlapped) tn = tn_prev(tn); ==> crash, when tn_prev(B) is referenced. When the ultimate node is removed at scan time and the overlapped flag is set on the penultimate node, then nothing updates the overlapped flag of that node. The overlapped iterators blindly expect that the ultimate node does not have the overlapped flag set, which causes the scan code to crash. It would be a huge overhead to go through the node chain on node removal and fix up the overlapped flags, so detecting such a case on the fly in the overlapped iterators is a simpler and reliable solution. Cc: stable@kernel.org Signed-off-by: Thomas Gleixner Signed-off-by: David Woodhouse diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c index 6ca08ad..1fc1e92 100644 --- a/fs/jffs2/readinode.c +++ b/fs/jffs2/readinode.c @@ -220,7 +220,7 @@ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *tn) { uint32_t fn_end = tn->fn->ofs + tn->fn->size; - struct jffs2_tmp_dnode_info *this; + struct jffs2_tmp_dnode_info *this, *ptn; dbg_readinode("insert fragment %#04x-%#04x, ver %u at %08x\n", tn->fn->ofs, fn_end, tn->version, ref_offset(tn->fn->raw)); @@ -251,11 +251,18 @@ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, if (this) { /* If the node is coincident with another at a lower address, back up until the other node is found. It may be relevant */ - while (this->overlapped) - this = tn_prev(this); - - /* First node should never be marked overlapped */ - BUG_ON(!this); + while (this->overlapped) { + ptn = tn_prev(this); + if (!ptn) { + /* + * We killed a node which set the overlapped + * flags during the scan. Fix it up. + */ + this->overlapped = 0; + break; + } + this = ptn; + } dbg_readinode("'this' found %#04x-%#04x (%s)\n", this->fn->ofs, this->fn->ofs + this->fn->size, this->fn ? "data" : "hole"); } @@ -360,7 +367,17 @@ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, } if (!this->overlapped) break; - this = tn_prev(this); + + ptn = tn_prev(this); + if (!ptn) { + /* + * We killed a node which set the overlapped + * flags during the scan. Fix it up. + */ + this->overlapped = 0; + break; + } + this = ptn; } } @@ -456,8 +473,15 @@ static int jffs2_build_inode_fragtree(struct jffs2_sb_info *c, eat_last(&rii->tn_root, &last->rb); ver_insert(&ver_root, last); - if (unlikely(last->overlapped)) - continue; + if (unlikely(last->overlapped)) { + if (pen) + continue; + /* + * We killed a node which set the overlapped + * flags during the scan. Fix it up. + */ + last->overlapped = 0; + } /* Now we have a bunch of nodes in reverse version order, in the tree at ver_root. Most of the time, -- cgit v0.10.2 From e8bf069c419c1dc0657e02636441fe1179a9db14 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Sun, 22 Feb 2009 14:42:54 +0200 Subject: ALSA: aw2: do not grab every saa7146 based device Audiowerk2 driver snd-aw2 is bound to any saa7146 device as it does not check subsystem ids. Many DVB devices are saa7146 based, so aw2 driver grabs them as well. According to http://lkml.org/lkml/2008/10/15/311 aw2 devices have the subsystem ids set to 0, the saa7146 default. Fix conflicts with DVB devices by checking for subsystem ids = 0 specifically. Signed-off-by: Anssi Hannula Signed-off-by: Takashi Iwai diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c index 3f00ddf..c7c54e7 100644 --- a/sound/pci/aw2/aw2-alsa.c +++ b/sound/pci/aw2/aw2-alsa.c @@ -165,7 +165,7 @@ module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Audiowerk2 soundcard."); static struct pci_device_id snd_aw2_ids[] = { - {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, PCI_ANY_ID, PCI_ANY_ID, + {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, 0, 0, 0, 0, 0}, {0} }; -- cgit v0.10.2 From 5370d96f85962769ea3df3a81cc885f257c51589 Mon Sep 17 00:00:00 2001 From: Steve Chen Date: Sat, 21 Feb 2009 08:05:04 -0600 Subject: ALSA: fix excessive background noise introduced by OSS emulation rate shrink Incorrect variable was used to get the next sample which caused S2 to be stuck with the same value resulting in loud background noise. Signed-off-by: Steve Chen Cc: Signed-off-by: Takashi Iwai diff --git a/sound/core/oss/rate.c b/sound/core/oss/rate.c index a466443..2fa9299 100644 --- a/sound/core/oss/rate.c +++ b/sound/core/oss/rate.c @@ -157,7 +157,7 @@ static void resample_shrink(struct snd_pcm_plugin *plugin, while (dst_frames1 > 0) { S1 = S2; if (src_frames1-- > 0) { - S1 = *src; + S2 = *src; src += src_step; } if (pos & ~R_MASK) { -- cgit v0.10.2 From 2d4663816064fabb68935f920bbd7ccdc7f9392d Mon Sep 17 00:00:00 2001 From: Luke Yelavich Date: Mon, 23 Feb 2009 13:00:33 +1100 Subject: ALSA: hda - add another MacBook Pro 3,1 SSID Reference: Ubuntu bug #33245 https://bugs.launchpad.net/bugs/332456 Signed-off-by: Luke Yelavich Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ed8fcbd..f657122 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7017,6 +7017,7 @@ static int patch_alc882(struct hda_codec *codec) case 0x106b3e00: /* iMac 24 Aluminium */ board_config = ALC885_IMAC24; break; + case 0x106b00a0: /* MacBookPro3,1 - Another revision */ case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */ case 0x106b00a4: /* MacbookPro4,1 */ case 0x106b2c00: /* Macbook Pro rev3 */ -- cgit v0.10.2 From cc374c477c9bf95f409fed16426856d86a97394f Mon Sep 17 00:00:00 2001 From: Juan Jesus Garcia de Soria Date: Mon, 23 Feb 2009 08:11:59 +0100 Subject: ALSA: hda - Quirk for Acer Aspire 6530G The Acer Aspire 6530G needs the 4930G "model" for the front mic to work properly. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f657122..a680be0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8470,6 +8470,8 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { ALC888_ACER_ASPIRE_4930G), SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G", ALC888_ACER_ASPIRE_4930G), + SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G", + ALC888_ACER_ASPIRE_4930G), SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */ SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL), SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG), -- cgit v0.10.2 From 1f9da5544073d38e05139f8ce9da24e78653c73e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 24 Feb 2009 15:31:02 +0100 Subject: ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS Fix the inverted logic of shared spdif switch. Reference: Novell bnc#478496 https://bugzilla.novell.com/show_bug.cgi?id=478496 Signed-off-by: Takashi Iwai diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 7958006..101a1c1 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1528,6 +1528,7 @@ static struct snd_emu_chip_details emu_chip_details[] = { .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, + .invert_shared_spdif = 1, /* digital/analog switch swapped */ .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102, .driver = "Audigy2", .name = "SB Audigy 2 Platinum [SB0240P]", -- cgit v0.10.2 From d22157b3d7a24d953ef5cce4515436be65b2e121 Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Mon, 23 Feb 2009 21:50:35 -0800 Subject: PCI: add some sysfs ABI docs Add sysfs ABI docs for driver entries bind, unbind and new_id. These entries are pretty old, from 2.6.0 onwards AFAIK, so this documents current behaviour. Signed-off-by: Chris Wright Acked-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index ceddcff..e638e15 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -1,3 +1,46 @@ +What: /sys/bus/pci/drivers/.../bind +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device location to this file will cause + the driver to attempt to bind to the device found at + this location. This is useful for overriding default + bindings. The format for the location is: DDDD:BB:DD.F. + That is Domain:Bus:Device.Function and is the same as + found in /sys/bus/pci/devices/. For example: + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + (Note: kernels before 2.6.28 may require echo -n). + +What: /sys/bus/pci/drivers/.../unbind +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device location to this file will cause the + driver to attempt to unbind from the device found at + this location. This may be useful when overriding default + bindings. The format for the location is: DDDD:BB:DD.F. + That is Domain:Bus:Device.Function and is the same as + found in /sys/bus/pci/devices/. For example: + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + (Note: kernels before 2.6.28 may require echo -n). + +What: /sys/bus/pci/drivers/.../new_id +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device ID to this file will attempt to + dynamically add a new device ID to a PCI device driver. + This may allow the driver to support more hardware than + was included in the driver's static device ID support + table at compile time. The format for the device ID is: + VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID, + Device ID, Subsystem Vendor ID, Subsystem Device ID, + Class, Class Mask, and Private Driver Data. The Vendor ID + and Device ID fields are required, the rest are optional. + Upon successfully adding an ID, the driver will probe + for the device and attempt to bind to it. For example: + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id + What: /sys/bus/pci/devices/.../vpd Date: February 2008 Contact: Ben Hutchings -- cgit v0.10.2 From 1dec6b054dd1fc780e18b815068bf5677409eb2d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 23 Feb 2009 11:51:59 -0800 Subject: PCI: don't enable too many HT MSI mappings Prakash reported that his c51-mcp51 ondie sound card doesn't work with MSI. But if he hacks out the HT-MSI quirk, MSI works fine. So this patch reworks the nv_msi_ht_cap_quirk(). It will now only enable ht_msi on own its root device, avoiding enabling it on devices following that root dev. Reported-by: Prakash Punnoor Tested-by: Prakash Punnoor Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a21e1c2..a852329 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2050,10 +2050,100 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15, nvenet_msi_disable); -static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) +static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev) { struct pci_dev *host_bridge; + int pos; + int i, dev_no; + int found = 0; + + dev_no = dev->devfn >> 3; + for (i = dev_no; i >= 0; i--) { + host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); + if (!host_bridge) + continue; + + pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); + if (pos != 0) { + found = 1; + break; + } + pci_dev_put(host_bridge); + } + + if (!found) + return; + + /* root did that ! */ + if (msi_ht_cap_enabled(host_bridge)) + goto out; + + ht_enable_msi_mapping(dev); + +out: + pci_dev_put(host_bridge); +} + +static void __devinit ht_disable_msi_mapping(struct pci_dev *dev) +{ + int pos, ttl = 48; + + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); + + pci_write_config_byte(dev, pos + HT_MSI_FLAGS, + flags & ~HT_MSI_FLAGS_ENABLE); + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } +} + +static int __devinit ht_check_msi_mapping(struct pci_dev *dev) +{ int pos, ttl = 48; + int found = 0; + + /* check if there is HT MSI cap or enabled on this device */ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (found < 1) + found = 1; + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + if (flags & HT_MSI_FLAGS_ENABLE) { + if (found < 2) { + found = 2; + break; + } + } + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } + + return found; +} + +static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) +{ + struct pci_dev *host_bridge; + int pos; + int found; + + /* check if there is HT MSI cap or enabled on this device */ + found = ht_check_msi_mapping(dev); + + /* no HT MSI CAP */ + if (found == 0) + return; /* * HT MSI mapping should be disabled on devices that are below @@ -2069,24 +2159,19 @@ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); if (pos != 0) { /* Host bridge is to HT */ - ht_enable_msi_mapping(dev); + if (found == 1) { + /* it is not enabled, try to enable it */ + nv_ht_enable_msi_mapping(dev); + } return; } - /* Host bridge is not to HT, disable HT MSI mapping on this device */ - pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); - while (pos && ttl--) { - u8 flags; + /* HT MSI is not enabled */ + if (found == 1) + return; - if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, - &flags) == 0) { - dev_info(&dev->dev, "Disabling HT MSI mapping"); - pci_write_config_byte(dev, pos + HT_MSI_FLAGS, - flags & ~HT_MSI_FLAGS_ENABLE); - } - pos = pci_find_next_ht_capability(dev, pos, - HT_CAPTYPE_MSI_MAPPING); - } + /* Host bridge is not to HT, disable HT MSI mapping on this device */ + ht_disable_msi_mapping(dev); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk); -- cgit v0.10.2 From dbc7e1e567ef8cfc4b792ef6acb51d4ceb15746a Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 28 Jan 2009 19:31:18 -0800 Subject: PCI: pciehp: Handle interrupts that happen during initialization. Move the enabling of interrupts after all of the data structures are setup so that we can safely run the interrupt handler as soon as it is registered. Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Signed-off-by: Eric W. Biederman Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index db85284..39ae375 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -111,6 +111,7 @@ struct controller { int cmd_busy; unsigned int no_cmd_complete:1; unsigned int link_active_reporting:1; + unsigned int notification_enabled:1; }; #define INT_BUTTON_IGNORE 0 @@ -170,6 +171,7 @@ extern int pciehp_configure_device(struct slot *p_slot); extern int pciehp_unconfigure_device(struct slot *p_slot); extern void pciehp_queue_pushbutton_work(struct work_struct *work); struct controller *pcie_init(struct pcie_device *dev); +int pcie_init_notification(struct controller *ctrl); int pciehp_enable_slot(struct slot *p_slot); int pciehp_disable_slot(struct slot *p_slot); int pcie_enable_notification(struct controller *ctrl); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index c248554..681e391 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -434,6 +434,13 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ goto err_out_release_ctlr; } + /* Enable events after we have setup the data structures */ + rc = pcie_init_notification(ctrl); + if (rc) { + ctrl_err(ctrl, "Notification initialization failed\n"); + goto err_out_release_ctlr; + } + /* Check if slot is occupied */ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); t_slot->hpc_ops->get_adapter_status(t_slot, &value); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 71a8012..7a16c68 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -934,7 +934,7 @@ static void pcie_disable_notification(struct controller *ctrl) ctrl_warn(ctrl, "Cannot disable software notification\n"); } -static int pcie_init_notification(struct controller *ctrl) +int pcie_init_notification(struct controller *ctrl) { if (pciehp_request_irq(ctrl)) return -1; @@ -942,13 +942,17 @@ static int pcie_init_notification(struct controller *ctrl) pciehp_free_irq(ctrl); return -1; } + ctrl->notification_enabled = 1; return 0; } static void pcie_shutdown_notification(struct controller *ctrl) { - pcie_disable_notification(ctrl); - pciehp_free_irq(ctrl); + if (ctrl->notification_enabled) { + pcie_disable_notification(ctrl); + pciehp_free_irq(ctrl); + ctrl->notification_enabled = 0; + } } static int pcie_init_slot(struct controller *ctrl) @@ -1110,13 +1114,8 @@ struct controller *pcie_init(struct pcie_device *dev) if (pcie_init_slot(ctrl)) goto abort_ctrl; - if (pcie_init_notification(ctrl)) - goto abort_slot; - return ctrl; -abort_slot: - pcie_cleanup_slot(ctrl); abort_ctrl: kfree(ctrl); abort: -- cgit v0.10.2 From 1f9f13c8d59c1d8da1a602b71d1ab96d1d37d69e Mon Sep 17 00:00:00 2001 From: Andrew Patterson Date: Fri, 20 Feb 2009 16:04:59 -0700 Subject: PCI: Enable PCIe AER only after checking firmware support The PCIe port driver currently sets the PCIe AER error reporting bits for any root or switch port without first checking to see if firmware will grant control. This patch moves setting these bits to the AER service driver aer_enable_port routine. The bits are then set for the root port and any downstream switch ports after the check for firmware support (aer_osc_setup) is made. The patch also unsets the bits in a similar fashion when the AER service driver is unloaded. Reviewed-by: Alex Chiang Signed-off-by: Andrew Patterson Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index aac7006..d0c9736 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -108,6 +108,34 @@ int pci_cleanup_aer_correct_error_status(struct pci_dev *dev) } #endif /* 0 */ + +static void set_device_error_reporting(struct pci_dev *dev, void *data) +{ + bool enable = *((bool *)data); + + if (dev->pcie_type != PCIE_RC_PORT && + dev->pcie_type != PCIE_SW_UPSTREAM_PORT && + dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT) + return; + + if (enable) + pci_enable_pcie_error_reporting(dev); + else + pci_disable_pcie_error_reporting(dev); +} + +/** + * set_downstream_devices_error_reporting - enable/disable the error reporting bits on the root port and its downstream ports. + * @dev: pointer to root port's pci_dev data structure + * @enable: true = enable error reporting, false = disable error reporting. + */ +static void set_downstream_devices_error_reporting(struct pci_dev *dev, + bool enable) +{ + set_device_error_reporting(dev, &enable); + pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable); +} + static int find_device_iter(struct device *device, void *data) { struct pci_dev *dev; @@ -525,15 +553,11 @@ void aer_enable_rootport(struct aer_rpc *rpc) pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, ®32); pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32); - /* Enable Root Port device reporting error itself */ - pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, ®16); - reg16 = reg16 | - PCI_EXP_DEVCTL_CERE | - PCI_EXP_DEVCTL_NFERE | - PCI_EXP_DEVCTL_FERE | - PCI_EXP_DEVCTL_URRE; - pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL, - reg16); + /* + * Enable error reporting for the root port device and downstream port + * devices. + */ + set_downstream_devices_error_reporting(pdev, true); /* Enable Root Port's interrupt in response to error messages */ pci_write_config_dword(pdev, @@ -553,6 +577,12 @@ static void disable_root_aer(struct aer_rpc *rpc) u32 reg32; int pos; + /* + * Disable error reporting for the root port device and downstream port + * devices. + */ + set_downstream_devices_error_reporting(pdev, false); + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); /* Disable Root's interrupt in response to error messages */ pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index f9b874e..248b4db 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -97,8 +97,6 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev, pcie_portdrv_save_config(dev); - pci_enable_pcie_error_reporting(dev); - return 0; } -- cgit v0.10.2 From 09b4068a7fe442efc40e9dcbcf5ff37c3338ab15 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 25 Feb 2009 13:18:47 +1100 Subject: md/raid10: Don't skip more than 1 bitmap-chunk at a time during recovery. When doing recovery on a raid10 with a write-intent bitmap, we only need to recovery chunks that are flagged in the bitmap. However if we choose to skip a chunk as it isn't flag, the code currently skips the whole raid10-chunk, thus it might not recovery some blocks that need recovering. This patch fixes it. In case that is confusing, it might help to understand that there is a 'raid10 chunk size' which guides how data is distributed across the devices, and a 'bitmap chunk size' which says how much data corresponds to a single bit in the bitmap. This bug only affects cases where the bitmap chunk size is smaller than the raid10 chunk size. Cc: stable@kernel.org Signed-off-by: NeilBrown diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 6736d6d..118f89e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2010,13 +2010,13 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i /* There is nowhere to write, so all non-sync * drives must be failed, so try the next chunk... */ - { - sector_t sec = max_sector - sector_nr; - sectors_skipped += sec; + if (sector_nr + max_sync < max_sector) + max_sector = sector_nr + max_sync; + + sectors_skipped += (max_sector - sector_nr); chunks_skipped ++; sector_nr = max_sector; goto skipped; - } } static int run(mddev_t *mddev) -- cgit v0.10.2 From 78200d45cde2a79c0d0ae0407883bb264caa3c18 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 25 Feb 2009 13:18:47 +1100 Subject: md/raid10: Don't call bitmap_cond_end_sync when we are doing recovery. For raid1/4/5/6, resync (fixing inconsistencies between devices) is very similar to recovery (rebuilding a failed device onto a spare). The both walk through the device addresses in order. For raid10 it can be quite different. resync follows the 'array' address, and makes sure all copies are the same. Recover walks through 'device' addresses and recreates each missing block. The 'bitmap_cond_end_sync' function allows the write-intent-bitmap (When present) to be updated to reflect a partially completed resync. It makes assumptions which mean that it does not work correctly for raid10 recovery at all. In particularly, it can cause bitmap-directed recovery of a raid10 to not recovery some of the blocks that need to be recovered. So move the call to bitmap_cond_end_sync into the resync path, rather than being in the common "resync or recovery" path. Cc: stable@kernel.org Signed-off-by: NeilBrown diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 118f89e..e1feb87 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1749,8 +1749,6 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i if (!go_faster && conf->nr_waiting) msleep_interruptible(1000); - bitmap_cond_end_sync(mddev->bitmap, sector_nr); - /* Again, very different code for resync and recovery. * Both must result in an r10bio with a list of bios that * have bi_end_io, bi_sector, bi_bdev set, @@ -1886,6 +1884,8 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i /* resync. Schedule a read for every block at this virt offset */ int count = 0; + bitmap_cond_end_sync(mddev->bitmap, sector_nr); + if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, mddev->degraded) && !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { -- cgit v0.10.2 From 73d5c38a9536142e062c35997b044e89166e063b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 25 Feb 2009 13:18:47 +1100 Subject: md: avoid races when stopping resync. There has been a race in raid10 and raid1 for a long time which has only recently started showing up due to a scheduler changed. When a sync_read request finishes, as soon as reschedule_retry is called, another thread can mark the resync request as having completed, so md_do_sync can finish, ->stop can be called, and ->conf can be freed. So using conf after reschedule_retry is not safe. Similarly, when finishing a sync_write, calling md_done_sync must be the last thing we do, as it allows a chain of events which will free conf and other data structures. The first of these requires action in raid10.c The second requires action in raid1.c and raid10.c Cc: stable@kernel.org Signed-off-by: NeilBrown diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 01e3cff..e246642 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1237,8 +1237,9 @@ static void end_sync_write(struct bio *bio, int error) update_head_pos(mirror, r1_bio); if (atomic_dec_and_test(&r1_bio->remaining)) { - md_done_sync(mddev, r1_bio->sectors, uptodate); + sector_t s = r1_bio->sectors; put_buf(r1_bio); + md_done_sync(mddev, s, uptodate); } } diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index e1feb87..7301631 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1236,6 +1236,7 @@ static void end_sync_read(struct bio *bio, int error) /* for reconstruct, we always reschedule after a read. * for resync, only after all reads */ + rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev); if (test_bit(R10BIO_IsRecover, &r10_bio->state) || atomic_dec_and_test(&r10_bio->remaining)) { /* we have read all the blocks, @@ -1243,7 +1244,6 @@ static void end_sync_read(struct bio *bio, int error) */ reschedule_retry(r10_bio); } - rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev); } static void end_sync_write(struct bio *bio, int error) @@ -1264,11 +1264,13 @@ static void end_sync_write(struct bio *bio, int error) update_head_pos(i, r10_bio); + rdev_dec_pending(conf->mirrors[d].rdev, mddev); while (atomic_dec_and_test(&r10_bio->remaining)) { if (r10_bio->master_bio == NULL) { /* the primary of several recovery bios */ - md_done_sync(mddev, r10_bio->sectors, 1); + sector_t s = r10_bio->sectors; put_buf(r10_bio); + md_done_sync(mddev, s, 1); break; } else { r10bio_t *r10_bio2 = (r10bio_t *)r10_bio->master_bio; @@ -1276,7 +1278,6 @@ static void end_sync_write(struct bio *bio, int error) r10_bio = r10_bio2; } } - rdev_dec_pending(conf->mirrors[d].rdev, mddev); } /* -- cgit v0.10.2 From 7c04d1d97a8d918b7ae2ef478229862b71a65f06 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 15:36:40 -0800 Subject: drm/i915: remove PLL debugging messages These are normal; we walk through different values looking for the right one, so why flood the screen with messages? Signed-off-by: Jesse Barnes Reviewed-by: Eric Anholt Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 65b635c..a283427 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -217,7 +217,7 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type) return false; } -#define INTELPllInvalid(s) do { DRM_DEBUG(s); return false; } while (0) +#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) /** * Returns whether the given set of divisors are valid for a given refclk with * the given connectors. -- cgit v0.10.2 From 37df96736bfe6f5fd9a141d62946e1083d73e712 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 15:36:42 -0800 Subject: drm/i915: handle bogus VBT panel timing We've seen cases in the wild where the VBT sync data is wrong, so add some code to fix it up in that case, taking care to make sure that the total is greater than the sync end. Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 65be30d..fc28e2b 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -111,6 +111,12 @@ parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) panel_fixed_mode->clock = dvo_timing->clock * 10; panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + /* Some VBTs have bogus h/vtotal values */ + if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) + panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; + if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) + panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; + drm_mode_set_name(panel_fixed_mode); dev_priv->vbt_mode = panel_fixed_mode; -- cgit v0.10.2 From c8766ac5933d6ee75e7ce379a1eb5ceb451fcb83 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 23 Feb 2009 08:44:33 -0800 Subject: drm: Fix shifts of EDID vsync offset/width fields. Signed-off-by: Linus Torvalds Reviewed-by: Eric Anholt Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 5a4d324..e902b1c 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -320,10 +320,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo); mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo; - mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) | + mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 4) | pt->vsync_offset_lo); mode->vsync_end = mode->vsync_start + - ((pt->vsync_pulse_width_hi << 8) | + ((pt->vsync_pulse_width_hi << 4) | pt->vsync_pulse_width_lo); mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo); -- cgit v0.10.2 From fe56cf45f951b3810313584605c1d8a4f20b33a4 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 15:36:41 -0800 Subject: drm: Fix ordering of bit fields in EDID structure leading huge vsync values. Signed-off-by: Jesse Barnes Reviewed-by: Eric Anholt Signed-off-by: Dave Airlie diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index c707c15..ff8d27a 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -58,10 +58,10 @@ struct detailed_pixel_timing { u8 hsync_pulse_width_lo; u8 vsync_pulse_width_lo:4; u8 vsync_offset_lo:4; - u8 hsync_pulse_width_hi:2; - u8 hsync_offset_hi:2; u8 vsync_pulse_width_hi:2; u8 vsync_offset_hi:2; + u8 hsync_pulse_width_hi:2; + u8 hsync_offset_hi:2; u8 width_mm_lo; u8 height_mm_lo; u8 height_mm_hi:4; -- cgit v0.10.2 From 7bec756c74b1a5079d5074144bb77a6b3e7d7783 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 16:09:34 -0800 Subject: drm: disable encoders before re-routing them MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some cases we may receive a mode config that has a different CRTC<->encoder map that the current configuration. In that case, we need to disable any re-routed encoders before setting the mode, otherwise they may not pick up the new CRTC (if the output types are incompatible for example). Tested-by: Kristian Høgsberg Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 733028b..1c3a8c5 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -452,6 +452,59 @@ static void drm_setup_crtcs(struct drm_device *dev) kfree(modes); kfree(enabled); } + +/** + * drm_encoder_crtc_ok - can a given crtc drive a given encoder? + * @encoder: encoder to test + * @crtc: crtc to test + * + * Return false if @encoder can't be driven by @crtc, true otherwise. + */ +static bool drm_encoder_crtc_ok(struct drm_encoder *encoder, + struct drm_crtc *crtc) +{ + struct drm_device *dev; + struct drm_crtc *tmp; + int crtc_mask = 1; + + WARN(!crtc, "checking null crtc?"); + + dev = crtc->dev; + + list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) { + if (tmp == crtc) + break; + crtc_mask <<= 1; + } + + if (encoder->possible_crtcs & crtc_mask) + return true; + return false; +} + +/* + * Check the CRTC we're going to map each output to vs. its current + * CRTC. If they don't match, we have to disable the output and the CRTC + * since the driver will have to re-route things. + */ +static void +drm_crtc_prepare_encoders(struct drm_device *dev) +{ + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_encoder *encoder; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + encoder_funcs = encoder->helper_private; + /* Disable unused encoders */ + if (encoder->crtc == NULL) + (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); + /* Disable encoders whose CRTC is about to change */ + if (encoder_funcs->get_crtc && + encoder->crtc != (*encoder_funcs->get_crtc)(encoder)) + (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); + } +} + /** * drm_crtc_set_mode - set a mode * @crtc: CRTC to program @@ -547,6 +600,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, encoder_funcs->prepare(encoder); } + drm_crtc_prepare_encoders(dev); + crtc_funcs->prepare(crtc); /* Set up the DPLL and any encoders state that needs to adjust or depend @@ -617,7 +672,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) struct drm_device *dev; struct drm_crtc **save_crtcs, *new_crtc; struct drm_encoder **save_encoders, *new_encoder; - struct drm_framebuffer *old_fb; + struct drm_framebuffer *old_fb = NULL; bool save_enabled; bool mode_changed = false; bool fb_changed = false; @@ -668,9 +723,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) * and then just flip_or_move it */ if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ - if (set->crtc->fb == NULL) + if (set->crtc->fb == NULL) { + DRM_DEBUG("crtc has no fb, full mode set\n"); mode_changed = true; - else if ((set->fb->bits_per_pixel != + } else if ((set->fb->bits_per_pixel != set->crtc->fb->bits_per_pixel) || set->fb->depth != set->crtc->fb->depth) fb_changed = true; @@ -682,7 +738,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) fb_changed = true; if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { - DRM_DEBUG("modes are different\n"); + DRM_DEBUG("modes are different, full mode set\n"); drm_mode_debug_printmodeline(&set->crtc->mode); drm_mode_debug_printmodeline(set->mode); mode_changed = true; @@ -708,6 +764,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) } if (new_encoder != connector->encoder) { + DRM_DEBUG("encoder changed, full mode switch\n"); mode_changed = true; connector->encoder = new_encoder; } @@ -734,10 +791,20 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) if (set->connectors[ro] == connector) new_crtc = set->crtc; } + + /* Make sure the new CRTC will work with the encoder */ + if (new_crtc && + !drm_encoder_crtc_ok(connector->encoder, new_crtc)) { + ret = -EINVAL; + goto fail_set_mode; + } if (new_crtc != connector->encoder->crtc) { + DRM_DEBUG("crtc changed, full mode switch\n"); mode_changed = true; connector->encoder->crtc = new_crtc; } + DRM_DEBUG("setting connector %d crtc to %p\n", + connector->base.id, new_crtc); } /* mode_set_base is not a required function */ @@ -781,6 +848,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) fail_set_mode: set->crtc->enabled = save_enabled; + set->crtc->fb = old_fb; count = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (!connector->encoder) diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 0b0d236..c7d4b2e 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -76,6 +76,7 @@ struct drm_encoder_helper_funcs { void (*mode_set)(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); + struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder); /* detect for DAC style encoders */ enum drm_connector_status (*detect)(struct drm_encoder *encoder, struct drm_connector *connector); -- cgit v0.10.2 From b3f5e7329df1a508ac58ebe7509fb7a47b9eab6a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 19 Feb 2009 14:48:22 +0000 Subject: drm: Correct unbalanced drm_vblank_put() during mode setting. The first time we install a mode, the vblank will be disabled for a pipe and so drm_vblank_get() in drm_vblank_pre_modeset() will fail. As we unconditionally call drm_vblank_put() afterwards, the vblank reference counter becomes unbalanced. Signed-off-by: Chris Wilson Acked-by: Jesse Barnes Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 3795dbc..93e677a 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -435,6 +435,8 @@ EXPORT_SYMBOL(drm_vblank_get); */ void drm_vblank_put(struct drm_device *dev, int crtc) { + BUG_ON (atomic_read (&dev->vblank_refcount[crtc]) == 0); + /* Last user schedules interrupt disable */ if (atomic_dec_and_test(&dev->vblank_refcount[crtc])) mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ); @@ -460,8 +462,9 @@ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc) * so that interrupts remain enabled in the interim. */ if (!dev->vblank_inmodeset[crtc]) { - dev->vblank_inmodeset[crtc] = 1; - drm_vblank_get(dev, crtc); + dev->vblank_inmodeset[crtc] = 0x1; + if (drm_vblank_get(dev, crtc) == 0) + dev->vblank_inmodeset[crtc] |= 0x2; } } EXPORT_SYMBOL(drm_vblank_pre_modeset); @@ -473,9 +476,12 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc) if (dev->vblank_inmodeset[crtc]) { spin_lock_irqsave(&dev->vbl_lock, irqflags); dev->vblank_disable_allowed = 1; - dev->vblank_inmodeset[crtc] = 0; spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - drm_vblank_put(dev, crtc); + + if (dev->vblank_inmodeset[crtc] & 0x2) + drm_vblank_put(dev, crtc); + + dev->vblank_inmodeset[crtc] = 0; } } EXPORT_SYMBOL(drm_vblank_post_modeset); -- cgit v0.10.2 From d61e7380b402a481ab1fa8027068a24918f701c8 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 24 Feb 2009 20:31:53 -0500 Subject: drm: edid revision 0 is valid edid->revision == 0 should be valid (at least, so the error message indicates. :) and wikipedia seems to indicate that EDID 1.0 existed. We can dump the entire check, since edid->revision is a u8, so it can't ever be less than 0. Marko reports in RH bz#476735 that his monitor claims to be EDID 1.0, and therefore hits the check and is stuck at 800x600 because of it. Reported-by: Marko Ristola Signed-off-by: Kyle McMartin Acked-by: Jesse Barnes Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index e902b1c..a839a28 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -125,7 +125,7 @@ static bool edid_is_valid(struct edid *edid) DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version); goto bad; } - if (edid->revision <= 0 || edid->revision > 3) { + if (edid->revision > 3) { DRM_ERROR("EDID has minor version %d, which is not between 0-3\n", edid->revision); goto bad; } -- cgit v0.10.2 From dd0910b3c71b253c08111110f0399b924a8d5853 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 25 Feb 2009 14:49:21 +1000 Subject: drm/i915: make hw page ioremap use ioremap_wc However we still have another issue with ioremap_wc not falling back properly or somehow doing something else stupid, this probably needs to be tracked down. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 2d797ff..cc46495 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -811,7 +811,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data, dev_priv->hws_map.flags = 0; dev_priv->hws_map.mtrr = 0; - drm_core_ioremap(&dev_priv->hws_map, dev); + drm_core_ioremap_wc(&dev_priv->hws_map, dev); if (dev_priv->hws_map.handle == NULL) { i915_dma_cleanup(dev); dev_priv->status_gfx_addr = 0; -- cgit v0.10.2 From e08fb4f6d1dc95eff5b3fc1d0412bcb5afcae7f2 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 25 Feb 2009 14:52:30 +1000 Subject: drm/i915: convert DRM_ERROR to DRM_DEBUG in phys object pwrite path This snuck in when I wrote phys object support. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 28b726d..85685bf 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3548,7 +3548,7 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, user_data = (char __user *) (uintptr_t) args->data_ptr; obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset; - DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size); + DRM_DEBUG("obj_addr %p, %lld\n", obj_addr, args->size); ret = copy_from_user(obj_addr, user_data, args->size); if (ret) return -EFAULT; -- cgit v0.10.2 From 6aa03ab06978e97b3e0720f83280d7841051916b Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Wed, 25 Feb 2009 14:06:26 +0900 Subject: Fix iwlan DMA mapping direction When iwlan runs on IOMMU, IOMMU generates a lot of PTE write faults because PTE write bit is not set on some of PTE's. This is because iwlan driver calls DMA mapping with PCI_DMA_TODEVICE which is read only in mapping PTE. But iwlan device actually writes to the mapped page to update its contents. This issue is not exposed in swiotlb. But VT-d hardware can capture this fault and stop the fault transaction. The following patch fixes the issue. Signed-off-by: Fenghua Yu Reviewed-by: Bhavesh Davda Tested-by: Chris Wright Acked-by: Tomas Winkler Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index b0ee86c..ab13ff2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -148,7 +148,7 @@ static void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) pci_unmap_single(dev, pci_unmap_addr(&txq->cmd[index]->meta, mapping), pci_unmap_len(&txq->cmd[index]->meta, len), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); /* Unmap chunks, if any. */ for (i = 1; i < num_tbs; i++) { @@ -964,7 +964,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) * within command buffer array. */ txcmd_phys = pci_map_single(priv->pci_dev, out_cmd, sizeof(struct iwl_cmd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys); pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd)); /* Add buffer containing Tx command and MAC(!) header to TFD's @@ -1115,7 +1115,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); phys_addr = pci_map_single(priv->pci_dev, out_cmd, - len, PCI_DMA_TODEVICE); + len, PCI_DMA_BIDIRECTIONAL); pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr); pci_unmap_len_set(&out_cmd->meta, len, len); phys_addr += offsetof(struct iwl_cmd, hdr); @@ -1212,7 +1212,7 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, pci_unmap_single(priv->pci_dev, pci_unmap_addr(&txq->cmd[cmd_idx]->meta, mapping), pci_unmap_len(&txq->cmd[cmd_idx]->meta, len), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { -- cgit v0.10.2 From 0af80c04e2f2e45ae09fceb17df8050f828a5c40 Mon Sep 17 00:00:00 2001 From: David Fries Date: Wed, 25 Feb 2009 20:28:21 +0100 Subject: ide: ide.c 'clear' fix, update "ide=nodma" documentation Documentation/kernel-parameters.txt - ide=nodma is no longer valid. drivers/ide/Kconfig - The module is ide-core.ko not ide. drivers/ide/ide.c - It took me a while to figure out what the arguments %d.%d:%d to nodma module parameter ment, so I added a comment to each. - Added a comment to each of the sscanf lines. - There is a bug, if j is 0 it would previously clear all the other bits except the current device, changed in three different places. mask &= (1 << i) should be mask &= ~(1 << i). Signed-off-by: David Fries [bart: s/disk/device/ in ide.c, beautify patch description] Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 319785b..0ed3234 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -868,8 +868,10 @@ and is between 256 and 4096 characters. It is defined in the file icn= [HW,ISDN] Format: [,[,[,]]] - ide= [HW] (E)IDE subsystem - Format: ide=nodma or ide=doubler + ide-core.nodma= [HW] (E)IDE subsystem + Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc + .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom + .chs .ignore_cable are additional options See Documentation/ide/ide.txt. idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 3dad229..e072903 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -46,7 +46,7 @@ menuconfig IDE SMART parameters from disk drives. To compile this driver as a module, choose M here: the - module will be called ide. + module will be called ide-core.ko. For further information, please read . diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 258805d..0920e3b 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -337,6 +337,7 @@ static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) int a, b, i, j = 1; unsigned int *dev_param_mask = (unsigned int *)kp->arg; + /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */ if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 && sscanf(s, "%d.%d", &a, &b) != 2) return -EINVAL; @@ -349,7 +350,7 @@ static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) if (j) *dev_param_mask |= (1 << i); else - *dev_param_mask &= (1 << i); + *dev_param_mask &= ~(1 << i); return 0; } @@ -392,6 +393,8 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp) { int a, b, c = 0, h = 0, s = 0, i, j = 1; + /* controller . device (0 or 1) : Cylinders , Heads , Sectors */ + /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */ if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 && sscanf(str, "%d.%d:%d", &a, &b, &j) != 3) return -EINVAL; @@ -407,7 +410,7 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp) if (j) ide_disks |= (1 << i); else - ide_disks &= (1 << i); + ide_disks &= ~(1 << i); ide_disks_chs[i].cyl = c; ide_disks_chs[i].head = h; @@ -469,6 +472,8 @@ static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) { int i, j = 1; + /* controller (ignore) */ + /* controller : 1 (ignore) | 0 (use) */ if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1) return -EINVAL; @@ -478,7 +483,7 @@ static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) if (j) ide_ignore_cable |= (1 << i); else - ide_ignore_cable &= (1 << i); + ide_ignore_cable &= ~(1 << i); return 0; } -- cgit v0.10.2 From 43a12216d3664a9fa6c8ceb398da6ef08fee7ff7 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 25 Feb 2009 20:28:22 +0100 Subject: amd74xx: device/vendor confusion Device and vendor ids were confused Signed-off-by: Roel Kluin Cc: Andrew Morton Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 69660a4..77267c8 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -166,7 +166,7 @@ static unsigned int init_chipset_amd74xx(struct pci_dev *dev) * Check for broken FIFO support. */ if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411) + dev->device == PCI_DEVICE_ID_AMD_VIPER_7411) t &= 0x0f; else t |= 0xf0; -- cgit v0.10.2 From f76bee16fc83f58d6c1b088977330f26ed7ae248 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 25 Feb 2009 20:28:22 +0100 Subject: atiixp: fix missing parentheses Fix missing parentheses so PIO/DMA timings for master device on the second channel are programmed correctly (IOW "8 0 24 16" offset values should be used instead of the current "8 0 16 16"). [ The bug went unnoticed because after PIO/DMA timings get programmed incorrectly for the third device they are overwritten with timings for the fourth device and since BIOS should also program timings for the third device everything should work fine until suspend/resume cycle or user requested transfer mode changes. ] Signed-off-by: Roel Kluin Cc: Sergei Shtylyov Cc: Andrew Morton [bart: update patch description] Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c index b2735d2..ecd1e62 100644 --- a/drivers/ide/atiixp.c +++ b/drivers/ide/atiixp.c @@ -52,7 +52,7 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); unsigned long flags; - int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; + int timing_shift = (drive->dn ^ 1) * 8; u32 pio_timing_data; u16 pio_mode_data; @@ -85,7 +85,7 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); unsigned long flags; - int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; + int timing_shift = (drive->dn ^ 1) * 8; u32 tmp32; u16 tmp16; u16 udma_ctl = 0; -- cgit v0.10.2 From f38344b0a0898d2a8c13581ee61007719e16e1d7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 25 Feb 2009 20:28:22 +0100 Subject: it821x: remove dead URL Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index e1c4f54..13b8153 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -5,9 +5,8 @@ * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver. * - * Documentation available from - * http://www.ite.com.tw/pc/IT8212F_V04.pdf - * Some other documents are NDA. + * Documentation: + * Datasheet is freely available, some other documents under NDA. * * The ITE8212 isn't exactly a standard IDE controller. It has two * modes. In pass through mode then it is an IDE controller. In its smart -- cgit v0.10.2 From d3dd7107f4d843d0f01d0f77d49a7c5449130577 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 25 Feb 2009 20:28:23 +0100 Subject: ide-cd: document capacity hack Just copy the comment from drivers/scsi/sr.c::sr_done() (from which the capacity hack has been originated). Cc: Borislav Petkov Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 0bfeb0c..690475b 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -194,6 +194,14 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, bio_sectors = max(bio_sectors(failed_command->bio), 4U); sector &= ~(bio_sectors - 1); + /* + * The SCSI specification allows for the value + * returned by READ CAPACITY to be up to 75 2K + * sectors past the last readable block. + * Therefore, if we hit a medium error within the + * last 75 2K sectors, we decrease the saved size + * value. + */ if (sector < get_capacity(info->disk) && drive->probed_capacity - sector < 4 * 75) set_capacity(info->disk, sector); -- cgit v0.10.2 From 8fed43684174b68f04d01d1210fd00536af790df Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 25 Feb 2009 20:28:24 +0100 Subject: ide: fix refcounting in device drivers During host driver module removal del_gendisk() results in a final put on drive->gendev and freeing the drive by drive_release_dev(). Convert device drivers from using struct kref to use struct device so device driver's object holds reference on ->gendev and prevents drive from prematurely going away. Also fix ->remove methods to not erroneously drop reference on a host driver by using only put_device() instead of ide*_put(). Reported-by: Stanislaw Gruszka Tested-by: Stanislaw Gruszka Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 690475b..ddfbea4 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -55,7 +55,7 @@ static DEFINE_MUTEX(idecd_ref_mutex); -static void ide_cd_release(struct kref *); +static void ide_cd_release(struct device *); static struct cdrom_info *ide_cd_get(struct gendisk *disk) { @@ -67,7 +67,7 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk) if (ide_device_get(cd->drive)) cd = NULL; else - kref_get(&cd->kref); + get_device(&cd->dev); } mutex_unlock(&idecd_ref_mutex); @@ -79,7 +79,7 @@ static void ide_cd_put(struct cdrom_info *cd) ide_drive_t *drive = cd->drive; mutex_lock(&idecd_ref_mutex); - kref_put(&cd->kref, ide_cd_release); + put_device(&cd->dev); ide_device_put(drive); mutex_unlock(&idecd_ref_mutex); } @@ -1798,15 +1798,17 @@ static void ide_cd_remove(ide_drive_t *drive) ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); ide_proc_unregister_driver(drive, info->driver); - + device_del(&info->dev); del_gendisk(info->disk); - ide_cd_put(info); + mutex_lock(&idecd_ref_mutex); + put_device(&info->dev); + mutex_unlock(&idecd_ref_mutex); } -static void ide_cd_release(struct kref *kref) +static void ide_cd_release(struct device *dev) { - struct cdrom_info *info = to_ide_drv(kref, cdrom_info); + struct cdrom_info *info = to_ide_drv(dev, cdrom_info); struct cdrom_device_info *devinfo = &info->devinfo; ide_drive_t *drive = info->drive; struct gendisk *g = info->disk; @@ -2005,7 +2007,12 @@ static int ide_cd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&info->kref); + info->dev.parent = &drive->gendev; + info->dev.release = ide_cd_release; + dev_set_name(&info->dev, dev_name(&drive->gendev)); + + if (device_register(&info->dev)) + goto out_free_disk; info->drive = drive; info->driver = &ide_cdrom_driver; @@ -2019,7 +2026,7 @@ static int ide_cd_probe(ide_drive_t *drive) g->driverfs_dev = &drive->gendev; g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE; if (ide_cdrom_setup(drive)) { - ide_cd_release(&info->kref); + put_device(&info->dev); goto failed; } @@ -2029,6 +2036,8 @@ static int ide_cd_probe(ide_drive_t *drive) add_disk(g); return 0; +out_free_disk: + put_disk(g); out_free_cd: kfree(info); failed: diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index ac40d6c..c878bfc 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -80,7 +80,7 @@ struct cdrom_info { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; /* Buffer for table of contents. NULL if we haven't allocated a TOC buffer for this device yet. */ diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 7857b20..0471094 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -25,7 +25,7 @@ module_param(debug_mask, ulong, 0644); static DEFINE_MUTEX(ide_disk_ref_mutex); -static void ide_disk_release(struct kref *); +static void ide_disk_release(struct device *); static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) { @@ -37,7 +37,7 @@ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) if (ide_device_get(idkp->drive)) idkp = NULL; else - kref_get(&idkp->kref); + get_device(&idkp->dev); } mutex_unlock(&ide_disk_ref_mutex); return idkp; @@ -48,7 +48,7 @@ static void ide_disk_put(struct ide_disk_obj *idkp) ide_drive_t *drive = idkp->drive; mutex_lock(&ide_disk_ref_mutex); - kref_put(&idkp->kref, ide_disk_release); + put_device(&idkp->dev); ide_device_put(drive); mutex_unlock(&ide_disk_ref_mutex); } @@ -66,17 +66,18 @@ static void ide_gd_remove(ide_drive_t *drive) struct gendisk *g = idkp->disk; ide_proc_unregister_driver(drive, idkp->driver); - + device_del(&idkp->dev); del_gendisk(g); - drive->disk_ops->flush(drive); - ide_disk_put(idkp); + mutex_lock(&ide_disk_ref_mutex); + put_device(&idkp->dev); + mutex_unlock(&ide_disk_ref_mutex); } -static void ide_disk_release(struct kref *kref) +static void ide_disk_release(struct device *dev) { - struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj); + struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj); ide_drive_t *drive = idkp->drive; struct gendisk *g = idkp->disk; @@ -348,7 +349,12 @@ static int ide_gd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&idkp->kref); + idkp->dev.parent = &drive->gendev; + idkp->dev.release = ide_disk_release; + dev_set_name(&idkp->dev, dev_name(&drive->gendev)); + + if (device_register(&idkp->dev)) + goto out_free_disk; idkp->drive = drive; idkp->driver = &ide_gd_driver; @@ -373,6 +379,8 @@ static int ide_gd_probe(ide_drive_t *drive) add_disk(g); return 0; +out_free_disk: + put_disk(g); out_free_idkp: kfree(idkp); failed: diff --git a/drivers/ide/ide-gd.h b/drivers/ide/ide-gd.h index a86779f..b604bdd 100644 --- a/drivers/ide/ide-gd.h +++ b/drivers/ide/ide-gd.h @@ -17,7 +17,7 @@ struct ide_disk_obj { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; unsigned int openers; /* protected by BKL for now */ /* Last failed packet command */ diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d7ecd3c..bb450a7 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -169,7 +169,7 @@ typedef struct ide_tape_obj { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; /* * failed_pc points to the last failed packet command, or contains @@ -267,7 +267,7 @@ static DEFINE_MUTEX(idetape_ref_mutex); static struct class *idetape_sysfs_class; -static void ide_tape_release(struct kref *); +static void ide_tape_release(struct device *); static struct ide_tape_obj *ide_tape_get(struct gendisk *disk) { @@ -279,7 +279,7 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk) if (ide_device_get(tape->drive)) tape = NULL; else - kref_get(&tape->kref); + get_device(&tape->dev); } mutex_unlock(&idetape_ref_mutex); return tape; @@ -290,7 +290,7 @@ static void ide_tape_put(struct ide_tape_obj *tape) ide_drive_t *drive = tape->drive; mutex_lock(&idetape_ref_mutex); - kref_put(&tape->kref, ide_tape_release); + put_device(&tape->dev); ide_device_put(drive); mutex_unlock(&idetape_ref_mutex); } @@ -308,7 +308,7 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) mutex_lock(&idetape_ref_mutex); tape = idetape_devs[i]; if (tape) - kref_get(&tape->kref); + get_device(&tape->dev); mutex_unlock(&idetape_ref_mutex); return tape; } @@ -2256,15 +2256,17 @@ static void ide_tape_remove(ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; ide_proc_unregister_driver(drive, tape->driver); - + device_del(&tape->dev); ide_unregister_region(tape->disk); - ide_tape_put(tape); + mutex_lock(&idetape_ref_mutex); + put_device(&tape->dev); + mutex_unlock(&idetape_ref_mutex); } -static void ide_tape_release(struct kref *kref) +static void ide_tape_release(struct device *dev) { - struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj); + struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj); ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; @@ -2407,7 +2409,12 @@ static int ide_tape_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&tape->kref); + tape->dev.parent = &drive->gendev; + tape->dev.release = ide_tape_release; + dev_set_name(&tape->dev, dev_name(&drive->gendev)); + + if (device_register(&tape->dev)) + goto out_free_disk; tape->drive = drive; tape->driver = &idetape_driver; @@ -2436,6 +2443,8 @@ static int ide_tape_probe(ide_drive_t *drive) return 0; +out_free_disk: + put_disk(g); out_free_tape: kfree(tape); failed: diff --git a/include/linux/ide.h b/include/linux/ide.h index 194da5a..fe235b6 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -663,7 +663,7 @@ typedef struct ide_drive_s ide_drive_t; #define to_ide_device(dev) container_of(dev, ide_drive_t, gendev) #define to_ide_drv(obj, cont_type) \ - container_of(obj, struct cont_type, kref) + container_of(obj, struct cont_type, dev) #define ide_drv_g(disk, cont_type) \ container_of((disk)->private_data, struct cont_type, driver) -- cgit v0.10.2 From 6b1ff036d4cde7834ef2f9dbea5747adaaac24e0 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 14 Feb 2009 04:11:29 -0500 Subject: [IA64] enable setting DMAR on by default The previous commit which introduced the DMAR_DEFAULT_ON setting in drivers/pci/dmar.c neglected to add the ability for ia64 to enable the IOMMU by default. Rectify that mistake, doh! Signed-off-by: Kyle McMartin Signed-off-by: Tony Luck diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 4eb45c0..153e727 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -638,6 +638,17 @@ config DMAR and include PCI device scope covered by these DMA remapping devices. +config DMAR_DEFAULT_ON + def_bool y + prompt "Enable DMA Remapping Devices by default" + depends on DMAR + help + Selecting this option will enable a DMAR device at boot time if + one is found. If this option is not selected, DMAR support can + be enabled by passing intel_iommu=on to the kernel. It is + recommended you say N here while the DMAR code remains + experimental. + endmenu endif -- cgit v0.10.2 From aa2f63c95439a11dfac35c60d9160dcd0189aed3 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 22 Feb 2009 02:33:28 +0100 Subject: [IA64] Do not go beyond ARRAY_SIZE of unw.hash static struct { ... :114 unsigned short hash[UNW_HASH_SIZE]; ... :2152 for (index = 0; index <= UNW_HASH_SIZE; ++index) { This is a bug, isn't it? s/<=/ Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c index 67810b7..b6c0e63 100644 --- a/arch/ia64/kernel/unwind.c +++ b/arch/ia64/kernel/unwind.c @@ -2149,7 +2149,7 @@ unw_remove_unwind_table (void *handle) /* next, remove hash table entries for this table */ - for (index = 0; index <= UNW_HASH_SIZE; ++index) { + for (index = 0; index < UNW_HASH_SIZE; ++index) { tmp = unw.cache + unw.hash[index]; if (unw.hash[index] >= UNW_CACHE_SIZE || tmp->ip < table->start || tmp->ip >= table->end) -- cgit v0.10.2 From 5b5923975f07836fc7a5388f9fa5f459828ae4ee Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 21 Feb 2009 23:40:27 +0100 Subject: [IA64] Don't go beyond iosapic_intr_info's arraysize vi arch/ia64/kernel/iosapic.c +142 static struct iosapic_intr_info { ... } iosapic_intr_info[NR_IRQS]; But at line 510 we have: for (i = 0; i <= NR_IRQS; i++) { s/<=/ Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 5cfd3d9..e131250 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -507,7 +507,7 @@ static int iosapic_find_sharable_irq(unsigned long trigger, unsigned long pol) if (trigger == IOSAPIC_EDGE) return -EINVAL; - for (i = 0; i <= NR_IRQS; i++) { + for (i = 0; i < NR_IRQS; i++) { info = &iosapic_intr_info[i]; if (info->trigger == trigger && info->polarity == pol && (info->dmode == IOSAPIC_FIXED || -- cgit v0.10.2 From 0b0a0806b0d8635e046bf533225a25903b1cddce Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 24 Feb 2009 20:51:52 +0000 Subject: shmem: fix shared anonymous accounting Each time I exit Firefox, /proc/meminfo's Committed_AS goes down almost 400 kB: OVERCOMMIT_NEVER would be allowing overcommits it should prohibit. Commit fc8744adc870a8d4366908221508bb113d8b72ee "Stop playing silly games with the VM_ACCOUNT flag" changed shmem_file_setup() to set the shmem file's VM_ACCOUNT flag according to VM_NORESERVE not being set in the vma flags; but did so only _after_ the shmem_acct_size(flags, size) call which is expected to pre-account a shared anonymous object. It's all clearer if we switch shmem.c over to use VM_NORESERVE throughout in place of !VM_ACCOUNT. But I very nearly sent in a patch which mistakenly removed the accounting from tmpfs files: shmem_get_inode()'s memset was good for not setting VM_ACCOUNT, but now it needs to set VM_NORESERVE. Rather than setting that by default, then perhaps clearing it again in shmem_file_setup(), let's pass it as a flag to shmem_get_inode(): that allows us to remove the #ifdef CONFIG_SHMEM from shmem_file_setup(). Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds diff --git a/mm/shmem.c b/mm/shmem.c index 19d566c..4103a23 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -169,13 +169,13 @@ static inline struct shmem_sb_info *SHMEM_SB(struct super_block *sb) */ static inline int shmem_acct_size(unsigned long flags, loff_t size) { - return (flags & VM_ACCOUNT) ? - security_vm_enough_memory_kern(VM_ACCT(size)) : 0; + return (flags & VM_NORESERVE) ? + 0 : security_vm_enough_memory_kern(VM_ACCT(size)); } static inline void shmem_unacct_size(unsigned long flags, loff_t size) { - if (flags & VM_ACCOUNT) + if (!(flags & VM_NORESERVE)) vm_unacct_memory(VM_ACCT(size)); } @@ -187,13 +187,13 @@ static inline void shmem_unacct_size(unsigned long flags, loff_t size) */ static inline int shmem_acct_block(unsigned long flags) { - return (flags & VM_ACCOUNT) ? - 0 : security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE)); + return (flags & VM_NORESERVE) ? + security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE)) : 0; } static inline void shmem_unacct_blocks(unsigned long flags, long pages) { - if (!(flags & VM_ACCOUNT)) + if (flags & VM_NORESERVE) vm_unacct_memory(pages * VM_ACCT(PAGE_CACHE_SIZE)); } @@ -1515,8 +1515,8 @@ static int shmem_mmap(struct file *file, struct vm_area_struct *vma) return 0; } -static struct inode * -shmem_get_inode(struct super_block *sb, int mode, dev_t dev) +static struct inode *shmem_get_inode(struct super_block *sb, int mode, + dev_t dev, unsigned long flags) { struct inode *inode; struct shmem_inode_info *info; @@ -1537,6 +1537,7 @@ shmem_get_inode(struct super_block *sb, int mode, dev_t dev) info = SHMEM_I(inode); memset(info, 0, (char *)inode - (char *)info); spin_lock_init(&info->lock); + info->flags = flags & VM_NORESERVE; INIT_LIST_HEAD(&info->swaplist); switch (mode & S_IFMT) { @@ -1779,9 +1780,10 @@ static int shmem_statfs(struct dentry *dentry, struct kstatfs *buf) static int shmem_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev) { - struct inode *inode = shmem_get_inode(dir->i_sb, mode, dev); + struct inode *inode; int error = -ENOSPC; + inode = shmem_get_inode(dir->i_sb, mode, dev, VM_NORESERVE); if (inode) { error = security_inode_init_security(inode, dir, NULL, NULL, NULL); @@ -1920,7 +1922,7 @@ static int shmem_symlink(struct inode *dir, struct dentry *dentry, const char *s if (len > PAGE_CACHE_SIZE) return -ENAMETOOLONG; - inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0); + inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0, VM_NORESERVE); if (!inode) return -ENOSPC; @@ -2332,7 +2334,7 @@ static int shmem_fill_super(struct super_block *sb, sb->s_flags |= MS_POSIXACL; #endif - inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0); + inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0, VM_NORESERVE); if (!inode) goto failed; inode->i_uid = sbinfo->uid; @@ -2574,12 +2576,12 @@ int shmem_unuse(swp_entry_t entry, struct page *page) return 0; } -#define shmem_file_operations ramfs_file_operations -#define shmem_vm_ops generic_file_vm_ops -#define shmem_get_inode ramfs_get_inode -#define shmem_acct_size(a, b) 0 -#define shmem_unacct_size(a, b) do {} while (0) -#define SHMEM_MAX_BYTES LLONG_MAX +#define shmem_vm_ops generic_file_vm_ops +#define shmem_file_operations ramfs_file_operations +#define shmem_get_inode(sb, mode, dev, flags) ramfs_get_inode(sb, mode, dev) +#define shmem_acct_size(flags, size) 0 +#define shmem_unacct_size(flags, size) do {} while (0) +#define SHMEM_MAX_BYTES LLONG_MAX #endif /* CONFIG_SHMEM */ @@ -2589,7 +2591,7 @@ int shmem_unuse(swp_entry_t entry, struct page *page) * shmem_file_setup - get an unlinked file living in tmpfs * @name: name for dentry (to be seen in /proc//maps * @size: size to be set for the file - * @flags: vm_flags + * @flags: VM_NORESERVE suppresses pre-accounting of the entire object size */ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags) { @@ -2623,13 +2625,10 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags) goto put_dentry; error = -ENOSPC; - inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0); + inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0, flags); if (!inode) goto close_file; -#ifdef CONFIG_SHMEM - SHMEM_I(inode)->flags = (flags & VM_NORESERVE) ? 0 : VM_ACCOUNT; -#endif d_instantiate(dentry, inode); inode->i_size = size; inode->i_nlink = 0; /* It is unlinked */ -- cgit v0.10.2 From 7ba07d16bd62f931efec1fc8e63bf1aeebfe42a9 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Wed, 11 Feb 2009 13:08:43 -0800 Subject: pata_it821x: resume from hibernation fails with RAID volume Hibernation didn't work for me since I started to use IT8212 controller. I did some debugging (booting with no_console_suspend init=/bin/sh). Found that resume fails (2.6.28) with "serial number mismatch 'some garbage' != 'some other garbage'" and "revalidation failed" messages. That's because the controller firmware fills different serial number in the IDENTIFY every boot. The patch below fixes the resume simply clearing the serial number. The proper fix would be probably to fill in the serial number of the RAID volume instead. I assume that there must be something like that stored on the drives but I don't know where. Fix resume on pata_it821x RAID volume by clearing the serial number in IDENTIFY data, which is otherwise different on each boot. Signed-off-by: Ondrej Zary Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index f1bb2f9..b05b86a 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -557,6 +557,9 @@ static unsigned int it821x_read_id(struct ata_device *adev, id[83] |= 0x4400; /* Word 83 is valid and LBA48 */ id[86] |= 0x0400; /* LBA48 on */ id[ATA_ID_MAJOR_VER] |= 0x1F; + /* Clear the serial number because it's different each boot + which breaks validation on resume */ + memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN); } return err_mask; } -- cgit v0.10.2 From 6be96ac15e4d913e1f48299db083ada5321803b2 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Thu, 19 Feb 2009 10:38:04 -0500 Subject: sata_mv: fix SoC interrupt breakage For some reason, sata_mv doesn't clear interrupt status during init when it's running on an SoC host adapter. If the bootloader has touched the SATA controller before starting Linux, Linux can end up enabling the SATA interrupt with events pending, which will cause the interrupt to be marked as spurious and then be disabled, which then breaks all further accesses to the controller. This patch makes the SoC path clear interrupt status on init like in the non-SoC case. Signed-off-by: Lennert Buytenhek Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 4ae1a41..7007edd 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -3114,19 +3114,17 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - if (!IS_SOC(hpriv)) { - /* Clear any currently outstanding host interrupt conditions */ - writelfl(0, mmio + hpriv->irq_cause_ofs); + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + hpriv->irq_cause_ofs); - /* and unmask interrupt generation for host regs */ - writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); + /* and unmask interrupt generation for host regs */ + writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); - /* - * enable only global host interrupts for now. - * The per-port interrupts get done later as ports are set up. - */ - mv_set_main_irq_mask(host, 0, PCI_ERR); - } + /* + * enable only global host interrupts for now. + * The per-port interrupts get done later as ports are set up. + */ + mv_set_main_irq_mask(host, 0, PCI_ERR); done: return rc; } -- cgit v0.10.2 From c48052cc36e02fff6a9bb3cf83c4206b9127611f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 11 Feb 2009 13:08:41 -0800 Subject: [libata] pata_amd: program FIFO With 32bit PIO we can use the posted write buffers, but only for 32bit I/O cycles. This means we must disable the FIFO for ATAPI where a final 16bit cycle may occur. Rework the FIFO logic so that we disable the FIFO then selectively re-enable it when we set the timings on AMD devices. Also fix a case where we scribbled on PCI config 0x41 of Nvidia chips when we shouldn't. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 63719ab..115b1cd 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.3.11" +#define DRV_VERSION "0.4.1" /** * timing_setup - shared timing computation and load @@ -145,6 +145,13 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline) return ata_sff_prereset(link, deadline); } +/** + * amd_cable_detect - report cable type + * @ap: port + * + * AMD controller/BIOS setups record the cable type in word 0x42 + */ + static int amd_cable_detect(struct ata_port *ap) { static const u32 bitmask[2] = {0x03, 0x0C}; @@ -158,6 +165,40 @@ static int amd_cable_detect(struct ata_port *ap) } /** + * amd_fifo_setup - set the PIO FIFO for ATA/ATAPI + * @ap: ATA interface + * @adev: ATA device + * + * Set the PCI fifo for this device according to the devices present + * on the bus at this point in time. We need to turn the post write buffer + * off for ATAPI devices as we may need to issue a word sized write to the + * device as the final I/O + */ + +static void amd_fifo_setup(struct ata_port *ap) +{ + struct ata_device *adev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 fifobit[2] = { 0xC0, 0x30}; + u8 fifo = fifobit[ap->port_no]; + u8 r; + + + ata_for_each_dev(adev, &ap->link, ENABLED) { + if (adev->class == ATA_DEV_ATAPI) + fifo = 0; + } + if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */ + fifo = 0; + + /* On the later chips the read prefetch bits become no-op bits */ + pci_read_config_byte(pdev, 0x41, &r); + r &= ~fifobit[ap->port_no]; + r |= fifo; + pci_write_config_byte(pdev, 0x41, r); +} + +/** * amd33_set_piomode - set initial PIO mode data * @ap: ATA interface * @adev: ATA device @@ -167,21 +208,25 @@ static int amd_cable_detect(struct ata_port *ap) static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 1); } static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 2); } static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 3); } static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 4); } @@ -397,6 +442,16 @@ static struct ata_port_operations nv133_port_ops = { .set_dmamode = nv133_set_dmamode, }; +static void amd_clear_fifo(struct pci_dev *pdev) +{ + u8 fifo; + /* Disable the FIFO, the FIFO logic will re-enable it as + appropriate */ + pci_read_config_byte(pdev, 0x41, &fifo); + fifo &= 0x0F; + pci_write_config_byte(pdev, 0x41, fifo); +} + static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info[10] = { @@ -503,14 +558,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (type < 3) ata_pci_bmdma_clear_simplex(pdev); - - /* Check for AMD7411 */ - if (type == 3) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); - + if (pdev->vendor == PCI_VENDOR_ID_AMD) + amd_clear_fifo(pdev); /* Cable detection on Nvidia chips doesn't work too well, * cache BIOS programmed UDMA mode. */ @@ -536,18 +585,11 @@ static int amd_reinit_one(struct pci_dev *pdev) return rc; if (pdev->vendor == PCI_VENDOR_ID_AMD) { - u8 fifo; - pci_read_config_byte(pdev, 0x41, &fifo); - if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); + amd_clear_fifo(pdev); if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 || pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401) ata_pci_bmdma_clear_simplex(pdev); } - ata_host_resume(host); return 0; } -- cgit v0.10.2 From c55af1f5abf606118b32e3ce9c3b1bbce5236e7e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 11 Feb 2009 13:08:42 -0800 Subject: [libata] pata_legacy: for VLB 32bit PIO don't try tricks with slop These devices are generally used with ATA anyway and it seems that some ATAPI will need us to issue the right number of words. Therefore as we can't switch mid burst on VLB devices we should only use 32bit I/O for suitable block sizes. Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 6c1d778..e3bc1b4 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -283,9 +283,10 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) { - if (ata_id_has_dword_io(dev->id)) { + int slop = buflen & 3; + /* 32bit I/O capable *and* we need to write a whole number of dwords */ + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) { struct ata_port *ap = dev->link->ap; - int slop = buflen & 3; unsigned long flags; local_irq_save(flags); @@ -735,7 +736,7 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, struct ata_port *ap = adev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id)) { + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) { if (rw == WRITE) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else -- cgit v0.10.2 From 49f297f8df9adb797334155470ea9ca68bdb041e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 19 Feb 2009 18:52:20 +0000 Subject: powerpc: Fix load/store float double alignment handler When we introduced VSX, we changed the way FPRs are stored in the thread_struct. Unfortunately we missed the load/store float double alignment handler code when updating how we access FPRs in the thread_struct. Below fixes this and merges the little/big endian case. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index ada0692..73cb6a3 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -367,27 +367,24 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg, unsigned int flags) { - char *ptr = (char *) ¤t->thread.TS_FPR(reg); - int i, ret; + char *ptr0 = (char *) ¤t->thread.TS_FPR(reg); + char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1); + int i, ret, sw = 0; if (!(flags & F)) return 0; if (reg & 1) return 0; /* invalid form: FRS/FRT must be even */ - if (!(flags & SW)) { - /* not byte-swapped - easy */ - if (!(flags & ST)) - ret = __copy_from_user(ptr, addr, 16); - else - ret = __copy_to_user(addr, ptr, 16); - } else { - /* each FPR value is byte-swapped separately */ - ret = 0; - for (i = 0; i < 16; ++i) { - if (!(flags & ST)) - ret |= __get_user(ptr[i^7], addr + i); - else - ret |= __put_user(ptr[i^7], addr + i); + if (flags & SW) + sw = 7; + ret = 0; + for (i = 0; i < 8; ++i) { + if (!(flags & ST)) { + ret |= __get_user(ptr0[i^sw], addr + i); + ret |= __get_user(ptr1[i^sw], addr + i + 8); + } else { + ret |= __put_user(ptr0[i^sw], addr + i); + ret |= __put_user(ptr1[i^sw], addr + i + 8); } } if (ret) -- cgit v0.10.2 From e423b9ecd6aa434ce9ba72a21fdc61079e620e0a Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Wed, 25 Feb 2009 13:26:48 +0000 Subject: powerpc: Fix 64bit memcpy() regression This fixes a regression introduced by commit 25d6e2d7c58ddc4a3b614fc5381591c0cfe66556 ("powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD"). This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU feature bit present to do the memcpy() with unaligned load doubles. But, along with this came a bug where our final load double would read bytes beyond a page boundary and into the next (unmapped) page. This was caught by enabling CONFIG_DEBUG_PAGEALLOC, The fix was to read only the number of bytes that we need to store rather than reading a full 8-byte doubleword and storing only a portion of that. In order to minimise the amount of existing code touched we use the original do_tail for the src_unaligned case. Below is an example of the regression, as reported by Sachin Sant: Unable to handle kernel paging request for data at address 0xc00000003f380000 Faulting instruction address: 0xc000000000039574 cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020] pc: c000000000039574: .memcpy+0x74/0x244 lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3] sp: c00000003baf32a0 msr: 8000000000009032 dar: c00000003f380000 dsisr: 40000000 current = 0xc00000003e54b010 paca = 0xc000000000a53680 pid = 1840, comm = readahead enter ? for help [link register ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3] [c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3] (unreliab le) [c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3] [c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c [c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678 [c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68 [c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c [c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120 [c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3] [c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260 [c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010 [c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4 [c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4 [c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8 [c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874 [c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140 [c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38 [c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40 Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S index fe2d34e..e178922 100644 --- a/arch/powerpc/lib/memcpy_64.S +++ b/arch/powerpc/lib/memcpy_64.S @@ -53,18 +53,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 3: std r8,8(r3) beq 3f addi r3,r3,16 - ld r9,8(r4) .Ldo_tail: bf cr7*4+1,1f - rotldi r9,r9,32 + lwz r9,8(r4) + addi r4,r4,4 stw r9,0(r3) addi r3,r3,4 1: bf cr7*4+2,2f - rotldi r9,r9,16 + lhz r9,8(r4) + addi r4,r4,2 sth r9,0(r3) addi r3,r3,2 2: bf cr7*4+3,3f - rotldi r9,r9,8 + lbz r9,8(r4) stb r9,0(r3) 3: ld r3,48(r1) /* return dest pointer */ blr @@ -133,11 +134,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) cmpwi cr1,r5,8 addi r3,r3,32 sld r9,r9,r10 - ble cr1,.Ldo_tail + ble cr1,6f ld r0,8(r4) srd r7,r0,r11 or r9,r7,r9 - b .Ldo_tail +6: + bf cr7*4+1,1f + rotldi r9,r9,32 + stw r9,0(r3) + addi r3,r3,4 +1: bf cr7*4+2,2f + rotldi r9,r9,16 + sth r9,0(r3) + addi r3,r3,2 +2: bf cr7*4+3,3f + rotldi r9,r9,8 + stb r9,0(r3) +3: ld r3,48(r1) /* return dest pointer */ + blr .Ldst_unaligned: PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7 -- cgit v0.10.2 From f72b728bf100f276628e378e1fe6c6acd5d09401 Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Wed, 25 Feb 2009 13:46:24 +0000 Subject: powerpc: Fix 64bit __copy_tofrom_user() regression This fixes a regression introduced by commit a4e22f02f5b6518c1484faea1f88d81802b9feac ("powerpc: Update 64bit __copy_tofrom_user() using CPU_FTR_UNALIGNED_LD_STD"). The same bug that existed in the 64bit memcpy() also exists here so fix it here too. The fix is the same as that applied to memcpy() with the addition of fixes for the exception handling code required for __copy_tofrom_user(). This stops us reading beyond the end of the source region we were told to copy. Signed-off-by: Mark Nelson Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index 70693a5..693b14a 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -62,18 +62,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 72: std r8,8(r3) beq+ 3f addi r3,r3,16 -23: ld r9,8(r4) .Ldo_tail: bf cr7*4+1,1f - rotldi r9,r9,32 +23: lwz r9,8(r4) + addi r4,r4,4 73: stw r9,0(r3) addi r3,r3,4 1: bf cr7*4+2,2f - rotldi r9,r9,16 +44: lhz r9,8(r4) + addi r4,r4,2 74: sth r9,0(r3) addi r3,r3,2 2: bf cr7*4+3,3f - rotldi r9,r9,8 +45: lbz r9,8(r4) 75: stb r9,0(r3) 3: li r3,0 blr @@ -141,11 +142,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 6: cmpwi cr1,r5,8 addi r3,r3,32 sld r9,r9,r10 - ble cr1,.Ldo_tail + ble cr1,7f 34: ld r0,8(r4) srd r7,r0,r11 or r9,r7,r9 - b .Ldo_tail +7: + bf cr7*4+1,1f + rotldi r9,r9,32 +94: stw r9,0(r3) + addi r3,r3,4 +1: bf cr7*4+2,2f + rotldi r9,r9,16 +95: sth r9,0(r3) + addi r3,r3,2 +2: bf cr7*4+3,3f + rotldi r9,r9,8 +96: stb r9,0(r3) +3: li r3,0 + blr .Ldst_unaligned: PPC_MTOCRF 0x01,r6 /* put #bytes to 8B bdry into cr7 */ @@ -218,7 +232,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 121: 132: addi r3,r3,8 -123: 134: 135: 138: @@ -226,6 +239,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 140: 141: 142: +123: +144: +145: /* * here we have had a fault on a load and r3 points to the first @@ -309,6 +325,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 187: 188: 189: +194: +195: +196: 1: ld r6,-24(r1) ld r5,-8(r1) @@ -329,7 +348,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) .llong 72b,172b .llong 23b,123b .llong 73b,173b + .llong 44b,144b .llong 74b,174b + .llong 45b,145b .llong 75b,175b .llong 24b,124b .llong 25b,125b @@ -347,6 +368,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) .llong 79b,179b .llong 80b,180b .llong 34b,134b + .llong 94b,194b + .llong 95b,195b + .llong 96b,196b .llong 35b,135b .llong 81b,181b .llong 36b,136b -- cgit v0.10.2 From b2bf96833c5782befc3e7700f791fde754a47b01 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 19 Feb 2009 08:50:26 +0100 Subject: block: fix bogus gcc warning for uninitialized var usage Newer gcc throw this warning: fs/bio.c: In function ?bio_alloc_bioset?: fs/bio.c:305: warning: ?p? may be used uninitialized in this function since it cannot figure out that 'p' is only ever used if 'bs' is non-NULL. Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index 72ab251..124b95c 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -302,7 +302,7 @@ void bio_init(struct bio *bio) struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs) { struct bio *bio = NULL; - void *p; + void *uninitialized_var(p); if (bs) { p = mempool_alloc(bs->bio_pool, gfp_mask); -- cgit v0.10.2 From 9e8c0bccdc944bd09361672d47660810c027bcaa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Fri, 20 Feb 2009 08:12:51 +0100 Subject: block: add documentation for register_blkdev() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add documentation for register_blkdev() function and for the parameters. Signed-off-by: Márton Németh Cc: Greg Kroah-Hartman Signed-off-by: Jens Axboe diff --git a/block/genhd.c b/block/genhd.c index e1eadcc..a9ec910 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -256,6 +256,22 @@ void blkdev_show(struct seq_file *seqf, off_t offset) } #endif /* CONFIG_PROC_FS */ +/** + * register_blkdev - register a new block device + * + * @major: the requested major device number [1..255]. If @major=0, try to + * allocate any unused major number. + * @name: the name of the new block device as a zero terminated string + * + * The @name must be unique within the system. + * + * The return value depends on the @major input parameter. + * - if a major device number was requested in range [1..255] then the + * function returns zero on success, or a negative error code + * - if any unused major number was requested with @major=0 parameter + * then the return value is the allocated major number in range + * [1..255] or a negative error code otherwise + */ int register_blkdev(unsigned int major, const char *name) { struct blk_major_name **n, *p; -- cgit v0.10.2 From 5e4c91c84b194b26cf592779e451f4b5be777cba Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 23 Feb 2009 08:53:35 +0100 Subject: cciss: shorten 30s timeout on controller reset If reset_devices is set for kexec, then cciss will delay 30 seconds since the old 5i controller _may_ need that long to recover. Replace the long sleep with incremental sleep and tests to reduce the 30 seconds to worst case for 5i, so that other controllers will proceed quickly. Reviewed-by: Mike Miller Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index d2cb67b..b5a0611 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3611,11 +3611,15 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, schedule_timeout_uninterruptible(30*HZ); /* Now try to get the controller to respond to a no-op */ - for (i=0; i<12; i++) { + for (i=0; i<30; i++) { if (cciss_noop(pdev) == 0) break; - else - printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : "")); + + schedule_timeout_uninterruptible(HZ); + } + if (i == 30) { + printk(KERN_ERR "cciss: controller seems dead\n"); + return -EBUSY; } } -- cgit v0.10.2 From 1e42807918d17e8c93bf14fbb74be84b141334c1 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 23 Feb 2009 09:03:10 +0100 Subject: block: reduce stack footprint of blk_recount_segments() blk_recalc_rq_segments() requires a request structure passed in, which we don't have from blk_recount_segments(). So the latter allocates one on the stack, using > 400 bytes of stack for that. This can cause us to spill over one page of stack from ext4 at least: 0) 4560 400 blk_recount_segments+0x43/0x62 1) 4160 32 bio_phys_segments+0x1c/0x24 2) 4128 32 blk_rq_bio_prep+0x2a/0xf9 3) 4096 32 init_request_from_bio+0xf9/0xfe 4) 4064 112 __make_request+0x33c/0x3f6 5) 3952 144 generic_make_request+0x2d1/0x321 6) 3808 64 submit_bio+0xb9/0xc3 7) 3744 48 submit_bh+0xea/0x10e 8) 3696 368 ext4_mb_init_cache+0x257/0xa6a [ext4] 9) 3328 288 ext4_mb_regular_allocator+0x421/0xcd9 [ext4] 10) 3040 160 ext4_mb_new_blocks+0x211/0x4b4 [ext4] 11) 2880 336 ext4_ext_get_blocks+0xb61/0xd45 [ext4] 12) 2544 96 ext4_get_blocks_wrap+0xf2/0x200 [ext4] 13) 2448 80 ext4_da_get_block_write+0x6e/0x16b [ext4] 14) 2368 352 mpage_da_map_blocks+0x7e/0x4b3 [ext4] 15) 2016 352 ext4_da_writepages+0x2ce/0x43c [ext4] 16) 1664 32 do_writepages+0x2d/0x3c 17) 1632 144 __writeback_single_inode+0x162/0x2cd 18) 1488 96 generic_sync_sb_inodes+0x1e3/0x32b 19) 1392 16 sync_sb_inodes+0xe/0x10 20) 1376 48 writeback_inodes+0x69/0xb3 21) 1328 208 balance_dirty_pages_ratelimited_nr+0x187/0x2f9 22) 1120 224 generic_file_buffered_write+0x1d4/0x2c4 23) 896 176 __generic_file_aio_write_nolock+0x35f/0x393 24) 720 80 generic_file_aio_write+0x6c/0xc8 25) 640 80 ext4_file_write+0xa9/0x137 [ext4] 26) 560 320 do_sync_write+0xf0/0x137 27) 240 48 vfs_write+0xb3/0x13c 28) 192 64 sys_write+0x4c/0x74 29) 128 128 system_call_fastpath+0x16/0x1b Split the segment counting out into a __blk_recalc_rq_segments() helper to avoid allocating an onstack request just for checking the physical segment count. Signed-off-by: Jens Axboe diff --git a/block/blk-merge.c b/block/blk-merge.c index b92f5b0..a104593 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -38,72 +38,84 @@ void blk_recalc_rq_sectors(struct request *rq, int nsect) } } -void blk_recalc_rq_segments(struct request *rq) +static unsigned int __blk_recalc_rq_segments(struct request_queue *q, + struct bio *bio, + unsigned int *seg_size_ptr) { - int nr_phys_segs; unsigned int phys_size; struct bio_vec *bv, *bvprv = NULL; - int seg_size; - int cluster; - struct req_iterator iter; - int high, highprv = 1; - struct request_queue *q = rq->q; + int cluster, i, high, highprv = 1; + unsigned int seg_size, nr_phys_segs; + struct bio *fbio; - if (!rq->bio) - return; + if (!bio) + return 0; + fbio = bio; cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags); seg_size = 0; phys_size = nr_phys_segs = 0; - rq_for_each_segment(bv, rq, iter) { - /* - * the trick here is making sure that a high page is never - * considered part of another segment, since that might - * change with the bounce page. - */ - high = page_to_pfn(bv->bv_page) > q->bounce_pfn; - if (high || highprv) - goto new_segment; - if (cluster) { - if (seg_size + bv->bv_len > q->max_segment_size) - goto new_segment; - if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv)) - goto new_segment; - if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv)) + for_each_bio(bio) { + bio_for_each_segment(bv, bio, i) { + /* + * the trick here is making sure that a high page is + * never considered part of another segment, since that + * might change with the bounce page. + */ + high = page_to_pfn(bv->bv_page) > q->bounce_pfn; + if (high || highprv) goto new_segment; + if (cluster) { + if (seg_size + bv->bv_len > q->max_segment_size) + goto new_segment; + if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv)) + goto new_segment; + if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv)) + goto new_segment; + + seg_size += bv->bv_len; + bvprv = bv; + continue; + } +new_segment: + if (nr_phys_segs == 1 && seg_size > + fbio->bi_seg_front_size) + fbio->bi_seg_front_size = seg_size; - seg_size += bv->bv_len; + nr_phys_segs++; bvprv = bv; - continue; + seg_size = bv->bv_len; + highprv = high; } -new_segment: - if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size) - rq->bio->bi_seg_front_size = seg_size; - - nr_phys_segs++; - bvprv = bv; - seg_size = bv->bv_len; - highprv = high; } - if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size) + if (seg_size_ptr) + *seg_size_ptr = seg_size; + + return nr_phys_segs; +} + +void blk_recalc_rq_segments(struct request *rq) +{ + unsigned int seg_size = 0, phys_segs; + + phys_segs = __blk_recalc_rq_segments(rq->q, rq->bio, &seg_size); + + if (phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size) rq->bio->bi_seg_front_size = seg_size; if (seg_size > rq->biotail->bi_seg_back_size) rq->biotail->bi_seg_back_size = seg_size; - rq->nr_phys_segments = nr_phys_segs; + rq->nr_phys_segments = phys_segs; } void blk_recount_segments(struct request_queue *q, struct bio *bio) { - struct request rq; struct bio *nxt = bio->bi_next; - rq.q = q; - rq.bio = rq.biotail = bio; + bio->bi_next = NULL; - blk_recalc_rq_segments(&rq); + bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, NULL); bio->bi_next = nxt; - bio->bi_phys_segments = rq.nr_phys_segments; bio->bi_flags |= (1 << BIO_SEG_VALID); } EXPORT_SYMBOL(blk_recount_segments); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index dcaa0fd..465d6ba 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -708,6 +708,8 @@ struct req_iterator { }; /* This should not be used directly - use rq_for_each_segment */ +#define for_each_bio(_bio) \ + for (; _bio; _bio = _bio->bi_next) #define __rq_for_each_bio(_bio, rq) \ if ((rq->bio)) \ for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next) -- cgit v0.10.2 From 9e973e64ac6dc504e6447d52193d4fff1a670156 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 24 Feb 2009 08:10:09 +0100 Subject: xen/blkfront: use blk_rq_map_sg to generate ring entries On occasion, the request will apparently have more segments than we fit into the ring. Jens says: > The second problem is that the block layer then appears to create one > too many segments, but from the dump it has rq->nr_phys_segments == > BLKIF_MAX_SEGMENTS_PER_REQUEST. I suspect the latter is due to > xen-blkfront not handling the merging on its own. It should check that > the new page doesn't form part of the previous page. The > rq_for_each_segment() iterates all single bits in the request, not dma > segments. The "easiest" way to do this is to call blk_rq_map_sg() and > then iterate the mapped sg list. That will give you what you are > looking for. > Here's a test patch, compiles but otherwise untested. I spent more > time figuring out how to enable XEN than to code it up, so YMMV! > Probably the sg list wants to be put inside the ring and only > initialized on allocation, then you can get rid of the sg on stack and > sg_init_table() loop call in the function. I'll leave that, and the > testing, to you. [Moved sg array into info structure, and initialize once. -J] Signed-off-by: Jens Axboe Signed-off-by: Jeremy Fitzhardinge diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 918ef725..b6c8ce2 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -82,6 +83,7 @@ struct blkfront_info enum blkif_state connected; int ring_ref; struct blkif_front_ring ring; + struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST]; unsigned int evtchn, irq; struct request_queue *rq; struct work_struct work; @@ -204,12 +206,11 @@ static int blkif_queue_request(struct request *req) struct blkfront_info *info = req->rq_disk->private_data; unsigned long buffer_mfn; struct blkif_request *ring_req; - struct req_iterator iter; - struct bio_vec *bvec; unsigned long id; unsigned int fsect, lsect; - int ref; + int i, ref; grant_ref_t gref_head; + struct scatterlist *sg; if (unlikely(info->connected != BLKIF_STATE_CONNECTED)) return 1; @@ -238,12 +239,13 @@ static int blkif_queue_request(struct request *req) if (blk_barrier_rq(req)) ring_req->operation = BLKIF_OP_WRITE_BARRIER; - ring_req->nr_segments = 0; - rq_for_each_segment(bvec, req, iter) { - BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST); - buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page)); - fsect = bvec->bv_offset >> 9; - lsect = fsect + (bvec->bv_len >> 9) - 1; + ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg); + BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST); + + for_each_sg(info->sg, sg, ring_req->nr_segments, i) { + buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg))); + fsect = sg->offset >> 9; + lsect = fsect + (sg->length >> 9) - 1; /* install a grant reference. */ ref = gnttab_claim_grant_reference(&gref_head); BUG_ON(ref == -ENOSPC); @@ -254,16 +256,12 @@ static int blkif_queue_request(struct request *req) buffer_mfn, rq_data_dir(req) ); - info->shadow[id].frame[ring_req->nr_segments] = - mfn_to_pfn(buffer_mfn); - - ring_req->seg[ring_req->nr_segments] = + info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn); + ring_req->seg[i] = (struct blkif_request_segment) { .gref = ref, .first_sect = fsect, .last_sect = lsect }; - - ring_req->nr_segments++; } info->ring.req_prod_pvt++; @@ -622,6 +620,8 @@ static int setup_blkring(struct xenbus_device *dev, SHARED_RING_INIT(sring); FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE); + sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST); + err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring)); if (err < 0) { free_page((unsigned long)sring); -- cgit v0.10.2 From 86883c2736e9697a38080a31c2794fa1316fd68f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 26 Feb 2009 10:32:31 -0800 Subject: Make ieee1394_init a fs-initcall It needs to happen before any firewire driver actually registers itself, and that was previously handled by having the Makefile list the core ieee1394 files before the drivers. But now there are firewire drivers in drivers/media, and the Makefile games aren't enough. So just make ieee1394_init happen earlier in the init sequence, the way all other bus layers already do. Reported-and-tested-by: Ingo Molnar Cc: Stefan Richter Cc: Henrik Kurelid Cc: Mauro Carvalho Chehab Cc: Ben Backx Signed-off-by: Linus Torvalds diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index 1028e72..8723380 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -1275,7 +1275,7 @@ static void __exit ieee1394_cleanup(void) unregister_chrdev_region(IEEE1394_CORE_DEV, 256); } -module_init(ieee1394_init); +fs_initcall(ieee1394_init); module_exit(ieee1394_cleanup); /* Exported symbols */ -- cgit v0.10.2 From 47be12e4eec84c1846f29af64fe25a396b57a026 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 9 Jan 2009 07:32:48 +0800 Subject: ocfs2: Access and dirty the buffer_head in mark_written. In __ocfs2_mark_extent_written, when we meet with the situation of c_split_covers_rec, the old solution just replace the extent record and forget to access and dirty the buffer_head. This will cause a problem when the unwritten extent is in an extent block. So access and dirty it. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 60fe74035..3a9e5de 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -4796,6 +4796,29 @@ out: return ret; } +static int ocfs2_replace_extent_rec(struct inode *inode, + handle_t *handle, + struct ocfs2_path *path, + struct ocfs2_extent_list *el, + int split_index, + struct ocfs2_extent_rec *split_rec) +{ + int ret; + + ret = ocfs2_path_bh_journal_access(handle, inode, path, + path_num_items(path) - 1); + if (ret) { + mlog_errno(ret); + goto out; + } + + el->l_recs[split_index] = *split_rec; + + ocfs2_journal_dirty(handle, path_leaf_bh(path)); +out: + return ret; +} + /* * Mark part or all of the extent record at split_index in the leaf * pointed to by path as written. This removes the unwritten @@ -4885,7 +4908,9 @@ static int __ocfs2_mark_extent_written(struct inode *inode, if (ctxt.c_contig_type == CONTIG_NONE) { if (ctxt.c_split_covers_rec) - el->l_recs[split_index] = *split_rec; + ret = ocfs2_replace_extent_rec(inode, handle, + path, el, + split_index, split_rec); else ret = ocfs2_split_and_insert(inode, handle, path, et, &last_eb_bh, split_index, -- cgit v0.10.2 From 7dc102b737e9f49dac426161294cb2d326a97d8e Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Tue, 3 Feb 2009 12:37:13 -0800 Subject: ocfs2/dlm: Retract fix for race between purge and migrate Mainline commit d4f7e650e55af6b235871126f747da88600e8040 attempts to delay the dlm_thread from sending the drop ref message if the lockres is being migrated. The problem is that we make the dlm_thread wait for the migration to complete. This causes a deadlock as dlm_thread also participates in the lockres migration process. A better fix for the original oss bugzilla#1012 is in testing. Signed-off-by: Sunil Mushran Acked-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c index d129520..4060bb3 100644 --- a/fs/ocfs2/dlm/dlmthread.c +++ b/fs/ocfs2/dlm/dlmthread.c @@ -181,8 +181,7 @@ static int dlm_purge_lockres(struct dlm_ctxt *dlm, spin_lock(&res->spinlock); /* This ensures that clear refmap is sent after the set */ - __dlm_wait_on_lockres_flags(res, (DLM_LOCK_RES_SETREF_INPROG | - DLM_LOCK_RES_MIGRATING)); + __dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG); spin_unlock(&res->spinlock); /* clear our bit from the master's refmap, ignore errors */ -- cgit v0.10.2 From c74ff8bb2235d848beb67fcfddae71ecbe3f92b1 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Tue, 3 Feb 2009 12:37:14 -0800 Subject: ocfs2: Cleanup the lockname print in dlmglue.c The dentry lock has a different format than other locks. This patch fixes ocfs2_log_dlm_error() macro to make it print the dentry lock correctly. Signed-off-by: Sunil Mushran Acked-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 206a237..7219a86 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -320,9 +320,14 @@ static void ocfs2_schedule_blocked_lock(struct ocfs2_super *osb, struct ocfs2_lock_res *lockres); static inline void ocfs2_recover_from_dlm_error(struct ocfs2_lock_res *lockres, int convert); -#define ocfs2_log_dlm_error(_func, _err, _lockres) do { \ - mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \ - _err, _func, _lockres->l_name); \ +#define ocfs2_log_dlm_error(_func, _err, _lockres) do { \ + if ((_lockres)->l_type != OCFS2_LOCK_TYPE_DENTRY) \ + mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \ + _err, _func, _lockres->l_name); \ + else \ + mlog(ML_ERROR, "DLM error %d while calling %s on resource %.*s%08x\n", \ + _err, _func, OCFS2_DENTRY_LOCK_INO_START - 1, (_lockres)->l_name, \ + (unsigned int)ocfs2_get_dentry_lock_ino(_lockres)); \ } while (0) static int ocfs2_downconvert_thread(void *arg); static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb, -- cgit v0.10.2 From dabc47de7a23f57522dc762d9d2ad875700d3497 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Tue, 3 Feb 2009 12:37:15 -0800 Subject: ocfs2/dlm: Use ast_lock to protect ast_list The code was using dlm->spinlock instead of dlm->ast_lock to protect the ast_list. This patch fixes the issue. Signed-off-by: Sunil Mushran Acked-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c index 86ca085..fcf879e 100644 --- a/fs/ocfs2/dlm/dlmunlock.c +++ b/fs/ocfs2/dlm/dlmunlock.c @@ -117,11 +117,11 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm, else BUG_ON(res->owner == dlm->node_num); - spin_lock(&dlm->spinlock); + spin_lock(&dlm->ast_lock); /* We want to be sure that we're not freeing a lock * that still has AST's pending... */ in_use = !list_empty(&lock->ast_list); - spin_unlock(&dlm->spinlock); + spin_unlock(&dlm->ast_lock); if (in_use) { mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock " "while waiting for an ast!", res->lockname.len, -- cgit v0.10.2 From 53ecd25e148615e0ed2a72635cc76f4773f97f90 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Tue, 3 Feb 2009 12:37:16 -0800 Subject: ocfs2/dlm: Make dlm_assert_master_handler() kill itself instead of the asserter In dlm_assert_master_handler(), if we get an incorrect assert master from a node that, we reply with EINVAL asking the asserter to die. The problem is that an assert is sent after so many hoops, it is invariably the node that thinks the asserter is wrong, is actually wrong. So instead of killing the asserter, this patch kills the assertee. This patch papers over a race that is still being addressed. Signed-off-by: Sunil Mushran Acked-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 54e182a..0a28139 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -1849,12 +1849,12 @@ int dlm_assert_master_handler(struct o2net_msg *msg, u32 len, void *data, if (!mle) { if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN && res->owner != assert->node_idx) { - mlog(ML_ERROR, "assert_master from " - "%u, but current owner is " - "%u! (%.*s)\n", - assert->node_idx, res->owner, - namelen, name); - goto kill; + mlog(ML_ERROR, "DIE! Mastery assert from %u, " + "but current owner is %u! (%.*s)\n", + assert->node_idx, res->owner, namelen, + name); + __dlm_print_one_lock_resource(res); + BUG(); } } else if (mle->type != DLM_MLE_MIGRATION) { if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN) { -- cgit v0.10.2 From 89a907afe073b8971a83d0ad54f391542b64d327 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 17 Feb 2009 04:39:28 +0800 Subject: ocfs2: Use the right access_* method in ctime update of xattr. In ctime updating of xattr, it use the wrong type of access for inode, so use ocfs2_journal_access_di instead. Reported-and-Tested-by: Tristan Ye Signed-off-by: Tao Ma Acked-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 915039f..e393315 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -2592,8 +2592,9 @@ static int __ocfs2_xattr_set_handle(struct inode *inode, if (!ret) { /* Update inode ctime. */ - ret = ocfs2_journal_access(ctxt->handle, inode, xis->inode_bh, - OCFS2_JOURNAL_ACCESS_WRITE); + ret = ocfs2_journal_access_di(ctxt->handle, inode, + xis->inode_bh, + OCFS2_JOURNAL_ACCESS_WRITE); if (ret) { mlog_errno(ret); goto out; -- cgit v0.10.2 From c8b9cf9a7cd25ba65166116d0a958f0bc709f0a7 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 24 Feb 2009 17:40:26 -0800 Subject: ocfs2: lock the metaecc process for xattr bucket For other metadata in ocfs2, metaecc is checked in ocfs2_read_blocks with io_mutex held. While for xattr bucket, it is calculated by the whole buckets. So we have to add a spin_lock to prevent multiple processes calculating metaecc. Signed-off-by: Tao Ma Tested-by: Tristan Ye Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 0773841..946d3c3 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -341,6 +341,9 @@ struct ocfs2_super struct ocfs2_node_map osb_recovering_orphan_dirs; unsigned int *osb_orphan_wipes; wait_queue_head_t osb_wipe_event; + + /* used to protect metaecc calculation check of xattr. */ + spinlock_t osb_xattr_lock; }; #define OCFS2_SB(sb) ((struct ocfs2_super *)(sb)->s_fs_info) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index b1cb38f..1c3acc4 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1747,6 +1747,7 @@ static int ocfs2_initialize_super(struct super_block *sb, INIT_LIST_HEAD(&osb->blocked_lock_list); osb->blocked_lock_count = 0; spin_lock_init(&osb->osb_lock); + spin_lock_init(&osb->osb_xattr_lock); ocfs2_init_inode_steal_slot(osb); atomic_set(&osb->alloc_stats.moves, 0); diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index e393315..a7c1679 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -274,10 +274,12 @@ static int ocfs2_read_xattr_bucket(struct ocfs2_xattr_bucket *bucket, bucket->bu_blocks, bucket->bu_bhs, 0, NULL); if (!rc) { + spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock); rc = ocfs2_validate_meta_ecc_bhs(bucket->bu_inode->i_sb, bucket->bu_bhs, bucket->bu_blocks, &bucket_xh(bucket)->xh_check); + spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock); if (rc) mlog_errno(rc); } @@ -310,9 +312,11 @@ static void ocfs2_xattr_bucket_journal_dirty(handle_t *handle, { int i; + spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock); ocfs2_compute_meta_ecc_bhs(bucket->bu_inode->i_sb, bucket->bu_bhs, bucket->bu_blocks, &bucket_xh(bucket)->xh_check); + spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock); for (i = 0; i < bucket->bu_blocks; i++) ocfs2_journal_dirty(handle, bucket->bu_bhs[i]); -- cgit v0.10.2 From 4442f518269c6b3686fcbcadad22dc4475309b16 Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Fri, 20 Feb 2009 11:11:50 +0800 Subject: ocfs2: set gap to seperate entry and value when xattr in bucket This patch set a gap (4 bytes) between xattr entry and name/value when xattr in bucket. This gap use to seperate entry and name/value when a bucket is full. It had already been set when xattr in inode/block. Signed-off-by: Tiger Yang Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index a7c1679..4ddd788 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -82,13 +82,14 @@ struct ocfs2_xattr_set_ctxt { #define OCFS2_XATTR_ROOT_SIZE (sizeof(struct ocfs2_xattr_def_value_root)) #define OCFS2_XATTR_INLINE_SIZE 80 +#define OCFS2_XATTR_HEADER_GAP 4 #define OCFS2_XATTR_FREE_IN_IBODY (OCFS2_MIN_XATTR_INLINE_SIZE \ - sizeof(struct ocfs2_xattr_header) \ - - sizeof(__u32)) + - OCFS2_XATTR_HEADER_GAP) #define OCFS2_XATTR_FREE_IN_BLOCK(ptr) ((ptr)->i_sb->s_blocksize \ - sizeof(struct ocfs2_xattr_block) \ - sizeof(struct ocfs2_xattr_header) \ - - sizeof(__u32)) + - OCFS2_XATTR_HEADER_GAP) static struct ocfs2_xattr_def_value_root def_xv = { .xv.xr_list.l_count = cpu_to_le16(1), @@ -1511,7 +1512,7 @@ static int ocfs2_xattr_set_entry(struct inode *inode, last += 1; } - free = min_offs - ((void *)last - xs->base) - sizeof(__u32); + free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP; if (free < 0) return -EIO; @@ -2194,7 +2195,7 @@ static int ocfs2_xattr_can_be_in_inode(struct inode *inode, last += 1; } - free = min_offs - ((void *)last - xs->base) - sizeof(__u32); + free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP; if (free < 0) return 0; @@ -5065,8 +5066,8 @@ try_again: xh_free_start = le16_to_cpu(xh->xh_free_start); header_size = sizeof(struct ocfs2_xattr_header) + count * sizeof(struct ocfs2_xattr_entry); - max_free = OCFS2_XATTR_BUCKET_SIZE - - le16_to_cpu(xh->xh_name_value_len) - header_size; + max_free = OCFS2_XATTR_BUCKET_SIZE - header_size - + le16_to_cpu(xh->xh_name_value_len) - OCFS2_XATTR_HEADER_GAP; mlog_bug_on_msg(header_size > blocksize, "bucket %llu has header size " "of %u which exceed block size\n", @@ -5099,7 +5100,7 @@ try_again: need = 0; } - free = xh_free_start - header_size; + free = xh_free_start - header_size - OCFS2_XATTR_HEADER_GAP; /* * We need to make sure the new name/value pair * can exist in the same block. @@ -5132,7 +5133,8 @@ try_again: } xh_free_start = le16_to_cpu(xh->xh_free_start); - free = xh_free_start - header_size; + free = xh_free_start - header_size + - OCFS2_XATTR_HEADER_GAP; if (xh_free_start % blocksize < need) free -= xh_free_start % blocksize; -- cgit v0.10.2 From 28d57d437786eb3e44f1ca3f0f41e7cfe29c6dd4 Mon Sep 17 00:00:00 2001 From: wengang wang Date: Fri, 13 Feb 2009 10:11:47 +0800 Subject: ocfs2: add IO error check in ocfs2_get_sector() Check for IO error in ocfs2_get_sector(). Signed-off-by: Wengang Wang Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 1c3acc4..7ac83a8 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1537,6 +1537,13 @@ static int ocfs2_get_sector(struct super_block *sb, unlock_buffer(*bh); ll_rw_block(READ, 1, bh); wait_on_buffer(*bh); + if (!buffer_uptodate(*bh)) { + mlog_errno(-EIO); + brelse(*bh); + *bh = NULL; + return -EIO; + } + return 0; } -- cgit v0.10.2 From b50be33e42e2c87812b30aee1a2b2a5ac6cb3ffa Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 27 Feb 2009 04:51:33 +0900 Subject: [MTD] [MAPS] Remove MODULE_DEVICE_TABLE() from ck804rom driver. We really don't want the BIOS flash mapping hacks to get automatically loaded. No idea why it isn't using pci_register_driver() though -- that should be fine... and is even _present_ but disabled by #if 0. Signed-off-by: David Woodhouse diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index 5f7a245..424f17d 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -342,9 +342,9 @@ static struct pci_device_id ck804xrom_pci_tbl[] = { { 0, } }; +#if 0 MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl); -#if 0 static struct pci_driver ck804xrom_driver = { .name = MOD_NAME, .id_table = ck804xrom_pci_tbl, -- cgit v0.10.2 From f6be37fdc62d0c0214bc49815d1180ebfbd716e2 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Thu, 26 Feb 2009 12:57:56 -0500 Subject: x86: enable DMAR by default Now that the obvious bugs have been worked out, specifically the iwlagn issue, and the write buffer errata, DMAR should be safe to turn back on by default. (We've had it on since those patches were first written a few weeks ago, without any noticeable bug reports (most have been due to the dma-api debug patchset.)) Signed-off-by: Kyle McMartin Acked-by: David Woodhouse Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 9c39095..bc2fbad 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1803,7 +1803,7 @@ config DMAR remapping devices. config DMAR_DEFAULT_ON - def_bool n + def_bool y prompt "Enable DMA Remapping Devices by default" depends on DMAR help -- cgit v0.10.2 From bbe194433baeadc953f49e3795b41ffffc5486dd Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Thu, 26 Feb 2009 10:46:48 -0800 Subject: PCI: AMD 813x B2 devices do not need boot interrupt quirk Turns out that the new AMD 813x devices do not need the quirk_disable_amd_813x_boot_interrupt quirk to be run on them. If it is, no interrupts are seen on the PCI-X adapter. From: Stefan Assmann Reported-by: Jamie Wellnitz Tested-by: Jamie Wellnitz Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a852329..f20d553 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1584,6 +1584,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_ */ #define AMD_813X_MISC 0x40 #define AMD_813X_NOIOAMODE (1<<0) +#define AMD_813X_REV_B2 0x13 static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) { @@ -1591,6 +1592,8 @@ static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) if (noioapicquirk) return; + if (dev->revision == AMD_813X_REV_B2) + return; pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); pci_config_dword &= ~AMD_813X_NOIOAMODE; -- cgit v0.10.2 From 1ac00cc21337b0b667493d9af79d88537de90aa3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 1 Feb 2009 14:24:18 +0000 Subject: powerpc/44x: Fix address decoding setup of PCI 2.x cells The PCI 2.x cells used on some 44x SoCs only let us configure the decode for the low 32-bit of the incoming PLB addresses. The top 4 bits (this is a 36-bit bus) are hard wired to different values depending on the specific SoC in use. Our code used to work "by accident" until I added support for the ISA memory holes and while at it added more validity checking of the addresses. This patch should bring it back to working condition. It still relies on the device-tree being correct but that's somewhat a pre-requisite for anything to work anyway. Signed-off-by: Benjamin Herrenschmidt Acked-by: Geert Uytterhoeven Acked-by: Josh Boyer diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 77fae5f..5558d93 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -204,6 +204,23 @@ static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller *hose, { u32 ma, pcila, pciha; + /* Hack warning ! The "old" PCI 2.x cell only let us configure the low + * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit + * address are actually hard wired to a value that appears to depend + * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx. + * + * The trick here is we just crop those top bits and ignore them when + * programming the chip. That means the device-tree has to be right + * for the specific part used (we don't print a warning if it's wrong + * but on the other hand, you'll crash quickly enough), but at least + * this code should work whatever the hard coded value is + */ + plb_addr &= 0xffffffffull; + + /* Note: Due to the above hack, the test below doesn't actually test + * if you address is above 4G, but it tests that address and + * (address + size) are both contained in the same 4G + */ if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) || size < 0x1000 || (plb_addr & (size - 1)) != 0) { printk(KERN_WARNING "%s: Resource out of range\n", -- cgit v0.10.2 From 7662b00c378fe638e84a853418cd833303fc050c Mon Sep 17 00:00:00 2001 From: Nicola Soranzo Date: Thu, 19 Feb 2009 13:41:56 -0300 Subject: V4L/DVB (10659): em28xx: register device to soundcard for sysfs As explained in "Writing an ALSA driver" (T. Iwai), audio drivers should set the struct device for the card before registering the card instance. This will add the correct /sys/class/sound/cardN/device symlink, so HAL can see the device and ConsoleKit sets its ACL permissions for the logged-in user. For em28xx audio capture cards found e.g. in Hauppauge WinTV-HVR-900 (R2), this patch fixes errors like: ALSA lib pcm_hw.c:1429:(_snd_pcm_hw_open) Invalid value for card Error opening audio: Permission denied when running mplayer as a normal user. Signed-off-by: Nicola Soranzo Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 5d882a4..2ac738f 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -463,6 +463,8 @@ static int em28xx_audio_init(struct em28xx *dev) pcm->info_flags = 0; pcm->private_data = dev; strcpy(pcm->name, "Empia 28xx Capture"); + + snd_card_set_dev(card, &dev->udev->dev); strcpy(card->driver, "Empia Em28xx Audio"); strcpy(card->shortname, "Em28xx Audio"); strcpy(card->longname, "Empia Em28xx Audio"); -- cgit v0.10.2 From 0ad675eb4533402fd7b03b25d1d4a0ab7a43ae6d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 23 Feb 2009 12:11:25 -0300 Subject: V4L/DVB (10663): soc-camera: fix S_CROP breakage on PXA and SuperH Recent format-negotiation patches caused S_CROP breakage in pxa_camera.c and sh_mobile_ceu_camera.c drivers, fix it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index a1d6008..07c334f 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1155,23 +1155,23 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, { struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct pxa_camera_dev *pcdev = ici->priv; - const struct soc_camera_data_format *host_fmt, *cam_fmt = NULL; - const struct soc_camera_format_xlate *xlate; + const struct soc_camera_data_format *cam_fmt = NULL; + const struct soc_camera_format_xlate *xlate = NULL; struct soc_camera_sense sense = { .master_clock = pcdev->mclk, .pixel_clock_max = pcdev->ciclk / 4, }; - int ret, buswidth; + int ret; - xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); - if (!xlate) { - dev_warn(&ici->dev, "Format %x not found\n", pixfmt); - return -EINVAL; - } + if (pixfmt) { + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); + if (!xlate) { + dev_warn(&ici->dev, "Format %x not found\n", pixfmt); + return -EINVAL; + } - buswidth = xlate->buswidth; - host_fmt = xlate->host_fmt; - cam_fmt = xlate->cam_fmt; + cam_fmt = xlate->cam_fmt; + } /* If PCLK is used to latch data from the sensor, check sense */ if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN) @@ -1201,8 +1201,8 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, } if (pixfmt && !ret) { - icd->buswidth = buswidth; - icd->current_fmt = host_fmt; + icd->buswidth = xlate->buswidth; + icd->current_fmt = xlate->host_fmt; } return ret; diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 9a2586b..ddcb81d 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -603,21 +603,18 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, const struct soc_camera_format_xlate *xlate; int ret; + if (!pixfmt) + return icd->ops->set_fmt(icd, pixfmt, rect); + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (!xlate) { dev_warn(&ici->dev, "Format %x not found\n", pixfmt); return -EINVAL; } - switch (pixfmt) { - case 0: /* Only geometry change */ - ret = icd->ops->set_fmt(icd, pixfmt, rect); - break; - default: - ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect); - } + ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect); - if (pixfmt && !ret) { + if (!ret) { icd->buswidth = xlate->buswidth; icd->current_fmt = xlate->host_fmt; pcdev->camera_fmt = xlate->cam_fmt; -- cgit v0.10.2 From 382c5546d618f24dc7d6ae7ca33412083720efbf Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Mon, 23 Feb 2009 06:27:16 -0300 Subject: V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards With (some) Technisat cards you cannot run multiple DVB applications in parallel and switch the channel at the same time. There seems to be a problem on the interfaces or even inside the flexcop-device that can't handle interruption on the streaming interface. This patch adds a watchdog to check whether data is supposed to come in (streaming PIDs are requested) and if no data is seen within 400ms (default) it resets the streaming/pid-filtering hardware. This patch is urgently needed to support the rev 2.8 of the hardware and solves problem occassionally seen on older hardware. Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c index b386cc6..451974b 100644 --- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c +++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c @@ -192,6 +192,7 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d return 0; } +EXPORT_SYMBOL(flexcop_pid_feed_control); void flexcop_hw_filter_init(struct flexcop_device *fc) { diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index 5b30dfc..76e37fd 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -13,9 +13,9 @@ static int enable_pid_filtering = 1; module_param(enable_pid_filtering, int, 0444); MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1"); -static int irq_chk_intv; +static int irq_chk_intv = 100; module_param(irq_chk_intv, int, 0644); -MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging)."); +MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog."); #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG #define dprintk(level,args...) \ @@ -34,7 +34,9 @@ MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently jus static int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS); +MODULE_PARM_DESC(debug, + "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))." + DEBSTATUS); #define DRIVER_VERSION "0.1" #define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver" @@ -58,6 +60,8 @@ struct flexcop_pci { int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */ u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */ int count; + int count_prev; + int stream_problem; spinlock_t irq_lock; @@ -103,18 +107,32 @@ static void flexcop_pci_irq_check_work(struct work_struct *work) container_of(work, struct flexcop_pci, irq_check_work.work); struct flexcop_device *fc = fc_pci->fc_dev; - flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714); - - flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4); - - if (v.sram_dest_reg_714.net_ovflow_error) - deb_chk("sram net_ovflow_error\n"); - if (v.sram_dest_reg_714.media_ovflow_error) - deb_chk("sram media_ovflow_error\n"); - if (v.sram_dest_reg_714.cai_ovflow_error) - deb_chk("sram cai_ovflow_error\n"); - if (v.sram_dest_reg_714.cai_ovflow_error) - deb_chk("sram cai_ovflow_error\n"); + if (fc->feedcount) { + + if (fc_pci->count == fc_pci->count_prev) { + deb_chk("no IRQ since the last check\n"); + if (fc_pci->stream_problem++ == 3) { + struct dvb_demux_feed *feed; + + spin_lock_irq(&fc->demux.lock); + list_for_each_entry(feed, &fc->demux.feed_list, + list_head) { + flexcop_pid_feed_control(fc, feed, 0); + } + + list_for_each_entry(feed, &fc->demux.feed_list, + list_head) { + flexcop_pid_feed_control(fc, feed, 1); + } + spin_unlock_irq(&fc->demux.lock); + + fc_pci->stream_problem = 0; + } + } else { + fc_pci->stream_problem = 0; + fc_pci->count_prev = fc_pci->count; + } + } schedule_delayed_work(&fc_pci->irq_check_work, msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); @@ -216,16 +234,12 @@ static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff) flexcop_dma_control_timer_irq(fc,FC_DMA_1,1); deb_irq("IRQ enabled\n"); + fc_pci->count_prev = fc_pci->count; + // fc_pci->active_dma1_addr = 0; // flexcop_dma_control_size_irq(fc,FC_DMA_1,1); - if (irq_chk_intv > 0) - schedule_delayed_work(&fc_pci->irq_check_work, - msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); } else { - if (irq_chk_intv > 0) - cancel_delayed_work(&fc_pci->irq_check_work); - flexcop_dma_control_timer_irq(fc,FC_DMA_1,0); deb_irq("IRQ disabled\n"); @@ -299,8 +313,6 @@ static int flexcop_pci_init(struct flexcop_pci *fc_pci) IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0) goto err_pci_iounmap; - - fc_pci->init_state |= FC_PCI_INIT; return ret; @@ -375,6 +387,10 @@ static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work); + if (irq_chk_intv > 0) + schedule_delayed_work(&fc_pci->irq_check_work, + msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); + return ret; err_fc_exit: @@ -393,6 +409,9 @@ static void flexcop_pci_remove(struct pci_dev *pdev) { struct flexcop_pci *fc_pci = pci_get_drvdata(pdev); + if (irq_chk_intv > 0) + cancel_delayed_work(&fc_pci->irq_check_work); + flexcop_pci_dma_exit(fc_pci); flexcop_device_exit(fc_pci->fc_dev); flexcop_pci_exit(fc_pci); diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c index 676413a..9106895 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -212,8 +212,7 @@ void flexcop_reset_block_300(struct flexcop_device *fc) v210.sw_reset_210.Block_reset_enable = 0xb2; fc->write_ibi_reg(fc,sw_reset_210,v210); - msleep(1); - + udelay(1000); fc->write_ibi_reg(fc,ctrl_208,v208_save); } -- cgit v0.10.2 From f5a3258335eef2baf534243da00bcd0e760dd2b5 Mon Sep 17 00:00:00 2001 From: Uwe Bugla Date: Mon, 23 Feb 2009 10:54:20 -0300 Subject: V4L/DVB (10695): Update Technisat card documentation Fixes for documentation of Technisat-based cards Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt index cdf6ee4..3f435ff 100644 --- a/Documentation/dvb/technisat.txt +++ b/Documentation/dvb/technisat.txt @@ -1,5 +1,5 @@ -How to set up the Technisat devices -=================================== +How to set up the Technisat/B2C2 Flexcop devices +================================================ 1) Find out what device you have ================================ @@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)... If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one: "Multimedia devices" => "Customise analog and hybrid tuner modules to build" -In this directory uncheck every driver which is activated there. +In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only). Then please activate: 2a) Main module part: a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" -b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR +b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card +OR c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers" Notice: d.) is helpful for troubleshooting 2b) Frontend module part: -1.) Revision 2.3: +1.) SkyStar DVB-S Revision 2.3: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based" -2.) Revision 2.6: +2.) SkyStar DVB-S Revision 2.6: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based" -3.) Revision 2.7: +3.) SkyStar DVB-S Revision 2.7: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based" c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" -4.) Revision 2.8: +4.) SkyStar DVB-S Revision 2.8: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based" d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" -5.) DVB-T card: +5.) AirStar DVB-T card: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based" -6.) DVB-C card: +6.) CableStar DVB-C card: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based" -7.) ATSC card 1st generation: +7.) AirStar ATSC card 1st generation: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510" -8.) ATSC card 2nd generation: +8.) AirStar ATSC card 2nd generation: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based" -c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" +c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners" -Author: Uwe Bugla December 2008 +9.) AirStar ATSC card 3rd generation: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" +c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support" + +Author: Uwe Bugla February 2009 -- cgit v0.10.2 From b391d0f08fb0858f7d2cc034ddcca6cd0545bd7d Mon Sep 17 00:00:00 2001 From: Uwe Bugla Date: Mon, 23 Feb 2009 10:56:11 -0300 Subject: V4L/DVB (10696): Remove outdated README for the flexcop-driver This patch removes an outdated README for the flexcop-driver. Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop deleted file mode 100644 index 5515469..0000000 --- a/Documentation/dvb/README.flexcop +++ /dev/null @@ -1,205 +0,0 @@ -This README escorted the skystar2-driver rewriting procedure. It describes the -state of the new flexcop-driver set and some internals are written down here -too. - -This document hopefully describes things about the flexcop and its -device-offsprings. Goal was to write an easy-to-write and easy-to-read set of -drivers based on the skystar2.c and other information. - -Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been -touched and rewritten. - -History & News -============== - 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana) - - - - -General coding processing -========================= - -We should proceed as follows (as long as no one complains): - -0) Think before start writing code! - -1) rewriting the skystar2.c with the help of the flexcop register descriptions -and splitting up the files to a pci-bus-part and a flexcop-part. -The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the -device-specific part and b2c2-flexcop.ko for the common flexcop-functions. - -2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c -and other pci drivers) - -3) make some beautification (see 'Improvements when rewriting (refactoring) is -done') - -4) Testing the new driver and maybe substitute the skystar2.c with it, to reach -a wider tester audience. - -5) creating an usb-bus-part using the already written flexcop code for the pci -card. - -Idea: create a kernel-object for the flexcop and export all important -functions. This option saves kernel-memory, but maybe a lot of functions have -to be exported to kernel namespace. - - -Current situation -================= - -0) Done :) -1) Done (some minor issues left) -2) Done -3) Not ready yet, more information is necessary -4) next to be done (see the table below) -5) USB driver is working (yes, there are some minor issues) - -What seems to be ready? ------------------------ - -1) Rewriting -1a) i2c is cut off from the flexcop-pci.c and seems to work -1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c -1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c -1e) eeprom (reading MAC address) -1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me)) -1f) misc. register accesses for reading parameters (e.g. resetting, revision) -1g) pid/mac filter (flexcop-hw-filter.c) -1i) dvb-stuff initialization in flexcop.c (done) -1h) dma stuff (now just using the size-irq, instead of all-together, to be done) -1j) remove flexcop initialization from flexcop-pci.c completely (done) -1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO') -1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from -non-static where possible, moved code to proper places) - -2) Search for errors in the leftover of flexcop-pci.c (partially done) -5a) add MAC address reading -5c) feeding of ISOC data to the software demux (format of the isochronous data -and speed optimization, no real error) (thanks to Vadim Catana) - -What to do in the near future? --------------------------------------- -(no special order here) - -5) USB driver -5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting) - -Testing changes ---------------- - -O = item is working -P = item is partially working -X = item is not working -N = item does not apply here - = item need to be examined - - | PCI | USB -item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312 --------+-------+---------+---------+-------+-------+---------+---------+------- -1a) | O | | | | N | N | N | N -1b) | O | | | | | | O | -1c) | N | N | | | N | N | O | -1d) | O | O -1e) | O | O -1f) | P -1g) | O -1h) | P | -1i) | O | N -1j) | O | N -1l) | O | N -2) | O | N -5a) | N | O -5b)* | N | -5c) | N | O - -* - not done yet - -Known bugs and problems and TODO --------------------------------- - -1g/h/l) when pid filtering is enabled on the pci card - -DMA usage currently: - The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first - address and triggers an IRQ when it's full and starts writing to the second - address. When the second address is full, the IRQ is triggered again, and - the flexcop writes to first address again, and so on. - The buffersize of each address is currently 640*188 bytes. - - Problem is, when using hw-pid-filtering and doing some low-bandwidth - operation (like scanning) the buffers won't be filled enough to trigger - the IRQ. That's why: - - When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ - is triggered. Is the current write address of DMA1 different to the one - during the last IRQ, then the data is passed to the demuxer. - - There is an additional DMA-IRQ-method: packet count IRQ. This isn't - implemented correctly yet. - - The solution is to disable HW PID filtering, but I don't know how the DVB - API software demux behaves on slow systems with 45MBit/s TS. - -Solved bugs :) --------------- -1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't -working) -SOLUTION: also index 0 was affected, because net_translation is done for -these indexes by default - -5b) isochronous transfer does only work in the first attempt (for the Sky2PC -USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really -woke up again (don't know if this need fixes, see -flexcop-fe-tuner.c:flexcop_sleep) - -NEWS: when the driver is loaded and unloaded and loaded again (w/o doing -anything in the while the driver is loaded the first time), no transfers take -place anymore. - -Improvements when rewriting (refactoring) is done -================================================= - -- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control - (enable sleeping for other demods than dvb-s) -- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA) - -Debugging ---------- -- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it - with this flexcop, this is important, because i2c is now using the - flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for - that, please tell us so). - -Everything which is identical in the following table, can be put into a common -flexcop-module. - - PCI USB -------------------------------------------------------------------------------- -Different: -Register access: accessing IO memory USB control message -I2C bus: I2C bus of the FC USB control message -Data transfer: DMA isochronous transfer -EEPROM transfer: through i2c bus not clear yet - -Identical: -Streaming: accessing registers -PID Filtering: accessing registers -Sram destinations: accessing registers -Tuner/Demod: I2C bus -DVB-stuff: can be written for common use - -Acknowledgements (just for the rewriting part) -================ - -Bjarne Steinsbo thought a lot in the first place of the pci part for this code -sharing idea. - -Andreas Oberritter for providing a recent PCI initialization template -(pluto2.c). - -Boleslaw Ciesielski for pointing out a problem with firmware loader. - -Vadim Catana for correcting the USB transfer. - -comments, critics and ideas to linux-dvb@linuxtv.org. -- cgit v0.10.2 From 08c2f5b4d76f83213e379b12df504269d21c9e7c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 27 Feb 2009 15:41:14 +0900 Subject: sh: ap325rxa: Revert ov772x support. This change depends on some v4l changes that have been pushed back to 2.6.30, so drop this and fall back on the old soc_camera code until then. Reported-by: Nobuhiro Iwamatsu Acked-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 7c35787..72da416 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include